1 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
2 Author: Bartlomiej Sieka <tur@semihalf.com>
3 Date: Wed Jul 11 20:11:07 2007 +0200
5 CM1.QP1: Support for the Schindler CM1.QP1 board.
7 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
8 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
11 Author: Heiko Schocher <hs@pollux.denx.de>
12 Date: Wed Jul 11 18:39:11 2007 +0200
14 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
15 - now the Flash ST M29W040B is supported (not tested)
16 - fix the "led" command
17 - fix compile error, if BUILD_DIR is used
19 Signed-off-by: Heiko Schocher <hs@denx.de>
21 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
22 Author: Wolfgang Denk <wd@denx.de>
23 Date: Tue Jul 10 00:01:28 2007 +0200
25 Coding style cleanup; update CHANGELOG.
27 Signed-off-by: Wolfgang Denk <wd@denx.de>
29 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
30 Author: Wolfgang Denk <wd@denx.de>
31 Date: Fri Jul 6 02:50:19 2007 +0200
33 Code cleanup and default config update for STC GP3 SSA board.
35 Signed-off-by: Wolfgang Denk <wd@denx.de>
37 commit b44896215a09c60fa40cae906f7ed207bbc2c492
38 Author: Sergei Poselenov <sposelenov@emcraft.com>
39 Date: Thu Jul 5 08:17:37 2007 +0200
41 Merged POST framework with the current TOT.
43 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
45 commit f780b83316d9af1f61d71cc88b1917b387b9b995
46 Author: Niklaus Giger <niklausgiger@gmx.ch>
47 Date: Wed Jun 27 18:11:38 2007 +0200
49 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
51 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
53 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
54 Author: Stefan Roese <sr@denx.de>
55 Date: Wed Jul 4 10:06:30 2007 +0200
57 ppc4xx: Update lwmon5 board
59 - Add optional ECC generation routine to preserve existing
60 RAM values. This is needed for the Linux log-buffer support
61 - Add optional DDR2 setup with CL=4
62 - GPIO50 not used anymore
63 - Lime register setup added
65 Signed-off-by: Stefan Roese <sr@denx.de>
67 commit 1f2a05898658900dc5717761e27abf2052e67e13
68 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
69 Date: Sat Jun 30 18:50:48 2007 +0200
73 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
75 commit a5d71e290f3673269be8eefb4ec44f53412f9461
76 Author: Heiko Schocher <hs@pollux.denx.de>
77 Date: Mon Jun 25 19:11:37 2007 +0200
79 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
81 Signed-off-by: Heiko Schocher <hs@denx.de>
83 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
84 Author: Niklaus Giger <niklaus.giger@nestal.com>
85 Date: Mon Jun 25 17:03:13 2007 +0200
87 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
89 This patch prints the DDR status registers upon machine check
90 interrupt on the 440EPx/GRx. This can be useful especially when
91 ECC support is enabled.
93 I added some small changes to the original patch from Niklaus to
94 make it compile clean.
96 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
97 Signed-off-by: Stefan Roese <sr@denx.de>
99 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
100 Author: Niklaus Giger <niklaus.giger@nestal.com>
101 Date: Mon Jun 25 16:50:55 2007 +0200
103 ppc4xx: Fix O=buildir builds
105 This patch fixes the problem to assemble cpu/ppc4xx/start.S
106 experienced last week where building failed having specified
109 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
111 commit 466fff1a7bb5fe764a06450626f6098219f446b8
112 Author: Stefan Roese <sr@denx.de>
113 Date: Mon Jun 25 15:57:39 2007 +0200
115 ppc4xx: Add pci_pre_init() for 405 boards
117 This patch removes the CFG_PCI_PRE_INIT option completely, since
118 it's not needed anymore with the patch from Matthias Fuchs with
119 the "weak" pci_pre_init() implementation.
121 Signed-off-by: Stefan Roese <sr@denx.de>
123 commit 6f35c53166213c24a5a0e2390ed861136ff73870
124 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
125 Date: Sun Jun 24 17:41:21 2007 +0200
127 ppc4xx: Maintenance patch for esd's CPCI405 derivats
129 -add pci_pre_init() for pci interrupt fixup code
130 -disable phy sleep mode via reset_phy() function
131 -use correct io accessors
134 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
136 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
137 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
138 Date: Sun Jun 24 17:23:41 2007 +0200
140 ppc4xx: Add pci_pre_init() for 405 boards
142 This patch adds support for calling a plattform dependant
143 pci_pre_init() function for 405 boards. This can be used to
144 move the current pci_405gp_fixup_irq() function into the
147 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
148 A default function with 'weak' attribute is used when
149 a board specific pci_pre_init() is not implemented.
151 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
153 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
154 Author: Wolfgang Denk <wd@denx.de>
155 Date: Fri Jun 22 23:59:00 2007 +0200
157 Coding stylke cleanup; rebuild CHANGELOG
159 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
160 Author: Igor Lisitsin <igor@emcraft.com>
161 Date: Wed Apr 18 14:55:19 2007 +0400
163 Adapt log buffer code to support Linux 2.6
165 A new environment variable, "logversion", selects the log buffer
166 behaviour. If it is not set or set to a value other than 2, then the
167 old, Linux 2.4.4, behaviour is selected.
169 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
172 commit a11e06965ec91270c51853407ff1261d3c740386
173 Author: Igor Lisitsin <igor@emcraft.com>
174 Date: Wed Mar 28 19:06:19 2007 +0400
176 Extend POST support for PPC440
178 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
180 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
183 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
184 Author: Heiko Schocher <hs@pollux.denx.de>
185 Date: Fri Jun 22 19:11:54 2007 +0200
187 [PCS440EP] upgrade the PCS440EP board:
188 - Show on the Status LEDs, some States of the board.
189 - Get the MAC addresses from the EEProm
191 - use the CF on the board.
192 - check the U-Boot image in the Flash with a SHA1
194 - use dynamic TLB entries generation for the SDRAM
196 Signed-off-by: Heiko Schocher <hs@denx.de>
198 commit 3a1f5c81b0b9557817a789bece839905581c2205
199 Author: Stefan Roese <sr@denx.de>
200 Date: Fri Jun 22 16:58:40 2007 +0200
202 ppc4xx: Fix problem with extended program_tlb() funtion
204 The recently extended program_tlb() function had a problem when
205 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
206 virtual address was not incremented. This patch fixes this issue
207 and is tested on Katmai with 512MB SDRAM.
209 Signed-off-by: Stefan Roese <sr@denx.de>
211 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
212 Author: Rafal Jaworowski <raj@semihalf.com>
213 Date: Fri Jun 22 14:58:04 2007 +0200
215 [ppc] Fix build breakage for all non-4xx PowerPC variants.
217 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
220 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
221 Author: Wolfgang Denk <wd@denx.de>
222 Date: Wed Jun 20 18:14:24 2007 +0200
224 Coding style cleanup. Refresh CHANGELOG.
226 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
227 Author: Stefan Roese <sr@denx.de>
228 Date: Tue Jun 19 17:22:44 2007 +0200
230 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
232 This patch adds a board command to configure the I2C bootstrap EEPROM
233 values. Right now 533 and 667MHz are supported for booting either via NOR
234 or NAND FLASH. Here the usage:
236 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
237 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
239 Signed-off-by: Stefan Roese <sr@denx.de>
241 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
242 Author: Stefan Roese <sr@denx.de>
243 Date: Tue Jun 19 16:42:31 2007 +0200
245 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
247 The latest changes showed a problem with the location of the NAND-SPL
248 image in the OCM and the init-data area (incl. cache). This patch
251 Signed-off-by: Stefan Roese <sr@denx.de>
253 commit 86ba99e34194394052d24c04dc40d1263d29a26f
254 Author: Stefan Roese <sr@denx.de>
255 Date: Tue Jun 19 16:40:58 2007 +0200
257 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
259 Signed-off-by: Stefan Roese <sr@denx.de>
261 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
262 Author: Stefan Roese <sr@denx.de>
263 Date: Fri Jun 15 11:33:41 2007 +0200
265 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
267 Now CONFIG_440 has to be defined in all PPC440 board config files.
269 Signed-off-by: Stefan Roese <sr@denx.de>
271 commit efa35cf12d914d4caba942acd5a6c45f217de302
272 Author: Grzegorz Bernacki <gjb@semihalf.com>
273 Date: Fri Jun 15 11:19:28 2007 +0200
275 ppc4xx: Clean up 440 exceptions handling
277 - Introduced dedicated switches for building 440 and 405 images required
278 for 440-specific machine instructions like 'rfmci' etc.
280 - Exception vectors moved to the proper location (_start moved away from
281 the critical exception handler space, which it occupied)
283 - CriticalInput now serviced (with default handler)
285 - MachineCheck properly serviced (added a dedicated handler and return
288 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
289 unhandled and those not relevant for 4xx were eliminated)
291 - Eliminated Linux leftovers, removed dead code
293 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
294 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
295 Signed-off-by: Stefan Roese <sr@denx.de>
297 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
298 Author: Stefan Roese <sr@denx.de>
299 Date: Fri Jun 15 08:18:01 2007 +0200
301 [ppc4xx] Add initial lwmon5 board support
303 This patch adds initial support for the Liebherr lwmon5 board euqipped
304 with an AMCC 440EPx PowerPC.
306 Signed-off-by: Stefan Roese <sr@denx.de>
308 commit 85f737376d5ff3d5f0d45a8b657686326d175307
309 Author: Stefan Roese <sr@denx.de>
310 Date: Fri Jun 15 07:39:43 2007 +0200
312 [ppc4xx] Extend 44x GPIO setup with default output state
314 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
315 is extended with the default GPIO output state (level).
317 Signed-off-by: Stefan Roese <sr@denx.de>
319 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
320 Author: Stefan Roese <sr@denx.de>
321 Date: Thu Jun 14 11:14:32 2007 +0200
323 [ppc4xx] Extend program_tlb() with virtual & physical addresses
325 Now program_tlb() allows to program a TLB (or multiple) with
326 different virtual and physical addresses. With this change, now one
327 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
328 diabled and once with caches enabled.
330 Signed-off-by: Stefan Roese <sr@denx.de>
332 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
333 Author: Detlev Zundel <dzu@denx.de>
334 Date: Wed May 23 19:02:41 2007 +0200
336 Change 'repeatable' attribute of some commands to sensible values.
338 Most prominently this changes 'erase' to be non-repeatable.
340 Signed-off-by: Detlev Zundel <dzu@denx.de>
342 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
343 Author: Detlev Zundel <dzu@denx.de>
344 Date: Wed May 23 18:47:48 2007 +0200
346 Fix 'run' not to continue after interrupted command
348 Signed-off-by: Detlev Zundel <dzu@denx.de>
350 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
351 Author: Bartlomiej Sieka <tur@semihalf.com>
352 Date: Fri Jun 8 14:52:22 2007 +0200
354 TQM5200: Add Flat Device Tree support, update default env. accordingly.
356 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
357 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
359 commit 9045f33c023f698660a2e45d1b2194c0711abebc
360 Author: Wolfgang Denk <wd@denx.de>
361 Date: Fri Jun 8 10:24:58 2007 +0200
363 Fix config problems on SC3 board; make ide_reset_timeout work.
365 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
366 Author: Benoît Monin <bmonin@adeneo.eu>
367 Date: Fri Jun 8 09:55:24 2007 +0200
369 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
371 Set the correct value in GPIOx_TCR when configuring the gpio
372 with CFG_440_GPIO_TABLE.
374 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
375 Signed-off-by: Stefan Roese <sr@denx.de>
377 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
378 Author: Wolfgang Denk <wd@denx.de>
379 Date: Wed Jun 6 16:26:56 2007 +0200
381 Coding Style cleanup; generate new CHANGELOG file.
383 Signed-off-by: Wolfgang Denk <wd@denx.de>
385 commit c440bfe6d6d92d66478a7e84402b31f48413617b
386 Author: Stefan Roese <sr@denx.de>
387 Date: Wed Jun 6 11:42:13 2007 +0200
389 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
391 This patch adds NAND booting support for the AMCC Acadia eval board.
393 Please make sure to configure jumper J7 to position 2-3 when booting
394 from NOR, and to position 1-2 when booting for NAND.
396 I also added a board command to configure the I2C bootstrap EEPROM
397 values. Right now only 267MHz is support for booting either via NOR
398 or NAND FLASH. Here the usage:
400 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
401 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
403 Signed-off-by: Stefan Roese <sr@denx.de>
405 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
406 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
407 Date: Tue Jun 5 12:30:52 2007 -0500
409 mpc8641 image size cleanup
411 e600 does not have a bootpg restriction.
412 Move the version string to beginning of image at fff00000.
413 Resetvec.S is not needed.
414 Update flash copy instructions.
415 Add tftpflash env variable
417 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
418 Signed-off-by: Jon Loeliger <jdl@freescale.com>
420 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
421 Author: Benoît Monin <bmonin@adeneo.eu>
422 Date: Mon Jun 4 08:36:05 2007 +0200
424 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
426 The attached patch is mainly cosmetic, allowing u-boot to
427 display the correct bootstrap option letter according to the
430 The original patch was extended with 405EZ support by Stefan
433 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
434 Signed-off-by: Stefan Roese <sr@denx.de>
436 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
437 Author: Stefan Roese <sr@denx.de>
438 Date: Fri Jun 1 16:18:17 2007 +0200
440 ppc4xx: Add missing file for Bamboo NAND booting support
442 Signed-off-by: Stefan Roese <sr@denx.de>
444 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
445 Author: Stefan Roese <sr@denx.de>
446 Date: Fri Jun 1 15:58:19 2007 +0200
448 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
450 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
451 suggested by AMCC it is not recommended to dynamically change the EBC
452 speed after bootup. So we undo this change to be on the safe side.
454 Signed-off-by: Stefan Roese <sr@denx.de>
456 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
457 Author: Stefan Roese <sr@denx.de>
458 Date: Fri Jun 1 15:29:04 2007 +0200
460 ppc4xx: Update Sequoia NAND booting support with ECC
462 Signed-off-by: Stefan Roese <sr@denx.de>
464 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
465 Author: Stefan Roese <sr@denx.de>
466 Date: Fri Jun 1 15:27:11 2007 +0200
468 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
470 This patch adds NAND booting support for the AMCC Bamboo eval board.
471 Since the NAND-SPL boot image is limited to 4kbytes, this version
472 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
473 supported, since the setup code for I2C DIMM autodetection and
474 configuration is too big for this NAND bootloader.
476 Signed-off-by: Stefan Roese <sr@denx.de>
478 commit 42be56f53c8b107868e6125c8524ae84293e95a7
479 Author: Stefan Roese <sr@denx.de>
480 Date: Fri Jun 1 15:23:04 2007 +0200
482 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
484 The U-Boot NAND booting support is now extended to support ECC
485 upon loading of the NAND U-Boot image.
487 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
489 Signed-off-by: Stefan Roese <sr@denx.de>
491 commit a471db07fbb65a841ffc9f4f112562b945230f98
492 Author: Stefan Roese <sr@denx.de>
493 Date: Fri Jun 1 15:19:29 2007 +0200
495 ppc4xx: Prepare Bamboo port for NAND booting support
497 This patch updates the "normal" Bamboo NOR booting port, so
498 that it is compatible with the coming soon NAND booting
501 It also enables the 2nd NAND flash on the Bamboo.
503 Signed-off-by: Stefan Roese <sr@denx.de>
505 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
506 Author: Stefan Roese <sr@denx.de>
507 Date: Fri Jun 1 15:16:58 2007 +0200
509 ppc4xx: Update in_be32() functions and friends to latest Linux version
511 Signed-off-by: Stefan Roese <sr@denx.de>
513 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
514 Author: Stefan Roese <sr@denx.de>
515 Date: Fri Jun 1 15:15:12 2007 +0200
517 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
519 This patch adds hardware ECC support to the NDFC driver. It also
520 changes the register access from using the "simple" in32/out32
521 functions to the in_be32/out_be32 functions, which make sure
522 that the access is correctly synced. This is the only recommended
523 access to SoC registers in the current Linux kernel.
525 Signed-off-by: Stefan Roese <sr@denx.de>
527 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
528 Author: Stefan Roese <sr@denx.de>
529 Date: Fri Jun 1 15:12:15 2007 +0200
531 NAND: Update nand_ecc.c to latest Linux version
533 This patch updates the nand_ecc code to the latest Linux version.
534 The main reason for this is the more compact code. This makes
535 it possible to include the ECC code into the NAND bootloader
536 image (NAND_SPL) for PPC4xx.
538 Signed-off-by: Stefan Roese <sr@denx.de>
540 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
541 Author: Stefan Roese <sr@denx.de>
542 Date: Fri Jun 1 15:09:50 2007 +0200
544 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
546 Signed-off-by: Stefan Roese <sr@denx.de>
548 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
549 Author: Stefan Roese <sr@denx.de>
550 Date: Fri Jun 1 13:45:24 2007 +0200
552 ppc4xx: Change Luan config file to support ECC
554 With the updated 44x DDR2 driver the Luan board now supports
555 ECC generation and checking.
557 Signed-off-by: Stefan Roese <sr@denx.de>
559 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
560 Author: Stefan Roese <sr@denx.de>
561 Date: Fri Jun 1 13:45:00 2007 +0200
563 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
565 Add config option for 180 degree advance clock control as needed
566 for the AMCC Luan eval board.
568 Signed-off-by: Stefan Roese <sr@denx.de>
570 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
571 Author: Wolfgang Denk <wd@denx.de>
572 Date: Thu May 31 17:20:09 2007 +0200
574 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
576 Signed-off-by: Wolfgang Denk <wd@denx.de>
578 commit 7049288fb1f16f1b317140226cdebd07bd416395
579 Author: Bartlomiej Sieka <tur@semihalf.com>
580 Date: Sun May 27 17:26:46 2007 +0200
582 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
584 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
586 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
587 Author: Bartlomiej Sieka <tur@semihalf.com>
588 Date: Sun May 27 17:06:36 2007 +0200
590 Motion-PRO: Add support for redundant environment.
592 Enable redundant environment, add a MTD partition for it; also add env.
593 variable command for passing MTD partitions to the kernel command line.
595 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
596 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
598 commit a26eabeec31746f06d309103690892805696e344
599 Author: Bartlomiej Sieka <tur@semihalf.com>
600 Date: Sun May 27 17:05:11 2007 +0200
602 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
604 Allow passing longer command line to the kernel - useful especially
605 for passing MTD partition layout.
607 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
608 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
610 commit 9160b96f71483a116de81c68985e8ee306d36764
611 Author: Bartlomiej Sieka <tur@semihalf.com>
612 Date: Sun May 27 17:04:18 2007 +0200
614 Fix: Add missing NULL termination in strings expanded by macros parser.
616 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
617 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
619 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
620 Author: Bartlomiej Sieka <tur@semihalf.com>
621 Date: Sun May 27 17:03:37 2007 +0200
623 Motion-PRO: Update EEPROM's page write bits and write delay.
625 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
626 have a page write capability of two bytes", and "This device offers fast (1ms)
627 byte write". Add 3ms of extra delay.
629 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
630 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
632 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
633 Author: Bartlomiej Sieka <tur@semihalf.com>
634 Date: Sun May 27 16:58:45 2007 +0200
636 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
638 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
639 networking does not function. This commit switches PHY to TX mode by clearing
640 the FX_SEL bit of Mode Control Register. It also reverses commit
641 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
643 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
644 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
646 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
647 Author: Bartlomiej Sieka <tur@semihalf.com>
648 Date: Sun May 27 16:57:15 2007 +0200
650 Motion-PRO: Add support for the temperature sensor.
652 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
653 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
655 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
656 Author: Bartlomiej Sieka <tur@semihalf.com>
657 Date: Sun May 27 16:55:23 2007 +0200
659 Motion-PRO: Add displaying of CPLD revision information during boot.
661 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
662 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
664 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
665 Author: Bartlomiej Sieka <tur@semihalf.com>
666 Date: Sun May 27 16:53:43 2007 +0200
668 MPC5xxx: Change names of defines related to IPB and PCI clocks.
670 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
671 them does not cause PCI or IPB clocks to run at the specified speed.
672 Instead, they configure divisors used to calculate said clocks. This
673 patch renames the defines according to their real function.
675 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
676 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
678 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
679 Author: Bartlomiej Sieka <tur@semihalf.com>
680 Date: Sun May 27 16:51:48 2007 +0200
682 Motion-PRO: Add LED support.
684 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
685 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
686 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
688 commit d756894722c888d09a9fa1df8323753772d3dcce
689 Author: Stefan Roese <sr@denx.de>
690 Date: Thu May 24 09:49:00 2007 +0200
692 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
694 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
695 fixes a small bug in the 405EZ OCM initialization. Thanks for
698 Signed-off-by: Stefan Roese <sr@denx.de>
700 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
701 Author: Stefan Roese <sr@denx.de>
702 Date: Thu May 24 08:22:09 2007 +0200
704 ppc4xx: Update AMCC Acadia support for board revision 1.1
706 This patch updates the Acadia (405EZ) support for the new 1.1 board
707 revision. It also adds support for NAND FLASH via the 4xx NDFC.
709 Please note that the jumper J7 must be in position 2-3 for this
710 NAND support. Position 1-2 is for NAND booting only. NAND booting
711 support will follow later.
713 Signed-off-by: Stefan Roese <sr@denx.de>
715 commit 822d55365bb557e084d0e33625a6dedcc866110b
716 Author: Jon Loeliger <jdl@freescale.com>
717 Date: Wed May 23 14:09:46 2007 -0500
719 Add LIST_86xx MAKEALL target for PowerPC builds.
721 Signed-off-by: Jon Loeliger <jdl@freescale.com>
723 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
724 Author: Stefan Roese <sr@denx.de>
725 Date: Tue May 22 12:48:09 2007 +0200
727 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
729 Signed-off-by: Stefan Roese <sr@denx.de>
731 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
732 Author: Stefan Roese <sr@denx.de>
733 Date: Tue May 22 12:46:10 2007 +0200
735 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
737 This patch adds support for 405 PPC's to the 4xx NAND driver
738 ndfc.c. This is in preparation for the new AMCC 405EZ.
740 Signed-off-by: Stefan Roese <sr@denx.de>
742 commit 10603d76767426be803dadd4fb688b97eb69481c
743 Author: Stefan Roese <sr@denx.de>
744 Date: Mon May 21 07:41:22 2007 +0200
746 ppc4xx: Fix problem in 405EZ OCM initialization
748 As spotted by Bruce Adler this patch fixes an initialization problem
751 Signed-off-by: Stefan Roese <sr@denx.de>
753 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
754 Author: Peter Pearse <peter.pearse@arm.com>
755 Date: Fri May 18 16:47:03 2007 +0100
757 Reduce line lengths to 80 characters max.
759 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
760 Author: Peter Pearse <peter.pearse@arm.com>
761 Date: Fri May 18 14:34:07 2007 +0100
765 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
766 Author: Peter Pearse <peter.pearse@arm.com>
767 Date: Fri May 18 14:33:11 2007 +0100
771 commit 255a3577c848706441daee0174543efe205a77f8
772 Author: Kim Phillips <kim.phillips@freescale.com>
773 Date: Wed May 16 16:52:19 2007 -0500
775 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
777 For all practical u-boot purposes, TSECs don't differ throughout the
778 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
780 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
782 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
783 Author: Stefano Babic <sbabic@denx.de>
784 Date: Wed May 16 14:49:12 2007 +0200
786 Fix compile problem cause my Microblaze merge
788 Signed-off-by: Stefano Babic <sbabic@denx.de>
790 commit ada4697d0230d6da552867777f98a67ec3ba2579
791 Author: Jeffrey Mann <mannj@embeddedplanet.com>
792 Date: Wed May 16 13:23:10 2007 +0200
794 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
796 Because the Sequoia board does not boot with an EBC faster than 66MHz,
797 the clock divider are changed after the initial boot process.
799 This allows for maximum clocking speeds to be achieved on newer boards.
800 Sequoia boards with 666.66 MHz processors require that the EBC divider
801 be set to 3 in order to start the initial boot process at a slower EBC
802 speed. After the initial boot process, the divider can be set back to 2,
803 which will cause the boards to run at 83.333MHz. This is backward
804 compatible with boards with 533.33 MHz processors, as these boards will
805 already be set with an EBC divider of 2.
807 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
809 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
810 Author: Wolfgang Denk <wd@denx.de>
811 Date: Wed May 16 01:16:53 2007 +0200
813 Minor Coding Style cleanup, update CHANGELOG.
815 Signed-off-by: Wolfgang Denk <wd@denx.de>
817 commit d62f64cc23a940eafe712c776b3249e4160753d1
818 Author: Wolfgang Denk <wd@denx.de>
819 Date: Wed May 16 00:13:33 2007 +0200
821 Coding Style Cleanup, new CHANGELOG
823 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
824 Author: Wolfgang Denk <wd@denx.de>
825 Date: Tue May 15 23:38:05 2007 +0200
827 Minor coding style cleanup.
829 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
830 Author: mushtaq khan <mushtaq_k@procsys.com>
831 Date: Fri Apr 20 14:23:02 2007 +0530
833 Add driver for S-ATA-controller on Intel processors with South
834 Bridge, ICH-5, ICH-6 and ICH-7.
838 1. Code is divided in to two files. All functions, which are
839 controller specific are kept in "drivers/ata_piix.c" file and
840 functions, which are not controller specific, are kept in
841 "common/cmd_sata.c" file.
843 2. Reading and Writing from the S-ATA drive is done using PIO method.
845 3. Driver can be configured for 48-bit addressing by defining macro
846 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
849 4. S-ATA read function is hooked to the File system, commands like
850 ext2ls and ext2load file can be used. This has been tested.
852 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
853 controller and identifies the S-ATA drives connected to it.
855 6. U-Boot command "sata" is added, which is used to read/write, print
856 partition table and get info about the drives present. This I have
857 implemented in same way as "ide" command is implemented in U-Boot.
859 7. This driver is for S-ATA in native mode.
861 8. This driver does not support the Native command queuing and
864 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
866 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
867 Author: mushtaq khan <mushtaq_k@procsys.com>
868 Date: Mon Apr 30 15:57:22 2007 +0530
870 Fixes bug clearing the bss section for i386
873 There is a bug in the code of clearing the bss section for processor
874 i386.(File: cpu/i386/start.S)
875 In the code, bss_start addr (starting addr of bss section) is put into
876 the register %eax, but the code which clears the bss section refers to
877 the addr pointed by %edi.
879 This patch fixes this bug by putting bss_start into %edi register.
881 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
883 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
884 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
885 Date: Mon Apr 30 16:47:28 2007 -0500
887 Add support for BCM5464 Quad Phy
889 Added support for Broadcom's BCM5464 Quad Phy
891 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
893 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
894 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
895 Date: Wed May 9 08:10:57 2007 +0800
897 Search the exception table with linear algorithm
899 Search the exception table with linear algorithm instead of
901 Because the exception table might be unsorted.
903 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
905 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
906 Author: Aubrey.Li <aubrey.adi@gmail.com>
907 Date: Mon May 14 11:47:35 2007 +0800
909 Fix compilation issues on MACOSX
911 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
912 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
914 commit 56fd7162985c412317bbf763a225fba23c64fd31
915 Author: Stephen Williams <steve@icarus.com>
916 Date: Tue May 15 07:55:42 2007 -0700
918 Fix for compile of JSE target
920 The attached patch fixes the compile of the JSE board in the
921 denx git as of 14 may 2007. It is an extremely simple patch,
922 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
924 Fix to compile JSE against 20070514 git of u-boot
926 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
927 Author: Stefan Roese <sr@denx.de>
928 Date: Fri May 11 12:01:49 2007 +0200
930 ppc4xx: Add mtcpr/mfcpr access macros
932 Signed-off-by: Stefan Roese <sr@denx.de>
934 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
935 Author: Stefan Roese <sr@denx.de>
936 Date: Fri May 11 12:01:06 2007 +0200
938 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
940 Signed-off-by: Stefan Roese <sr@denx.de>
942 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
943 Author: Piotr Kruszynski <ppk@semihalf.com>
944 Date: Thu May 10 16:55:52 2007 +0200
946 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
949 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
950 Author: Peter Pearse <peter.pearse@arm.com>
951 Date: Wed May 9 11:42:44 2007 +0100
953 Add the board directory for SMN42
955 commit 160131bf965785419626df6c388729fe0b597992
956 Author: Peter Pearse <peter.pearse@arm.com>
957 Date: Wed May 9 11:41:58 2007 +0100
959 Add the files for the SMN42 board
961 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
962 Author: Peter Pearse <peter.pearse@arm.com>
963 Date: Wed May 9 11:40:34 2007 +0100
965 Remove the deleted files for the SMN42 patch
967 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
968 Author: Peter Pearse <peter.pearse@arm.com>
969 Date: Wed May 9 11:37:56 2007 +0100
971 New board SMN42 branch
973 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
974 Author: Peter Pearse <peter.pearse@arm.com>
975 Date: Wed May 9 10:24:38 2007 +0100
979 commit b84289b595731e8851df46e893845cc1322c9b9b
980 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
981 Date: Tue May 8 14:17:07 2007 -0500
983 8641hpcn: Fix Makefile after moving pixis to board/freescale.
985 The OBJTREE != SRCTREE build scenario was broken.
988 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
989 Signed-off-by: Jon Loeliger <jdl@freescale.com>
991 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
992 Author: Michal Simek <monstr@monstr.eu>
993 Date: Tue May 8 15:57:43 2007 +0200
995 add: reading special purpose registers
997 commit 1a50f164beb065f360fbddb76029607d6b099698
998 Author: Michal Simek <monstr@monstr.eu>
999 Date: Tue May 8 14:52:52 2007 +0200
1001 add: Microblaze V5 exception handling
1003 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
1004 Author: Michal Simek <monstr@monstr.eu>
1005 Date: Tue May 8 14:39:11 2007 +0200
1007 add: FSL control read and write
1009 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
1010 Author: Piotr Kruszynski <ppk@semihalf.com>
1011 Date: Tue May 8 13:05:44 2007 +0200
1013 [Motion-PRO] Add support for I2C, EEPROM and RTC.
1015 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
1016 Author: Bartlomiej Sieka <tur@semihalf.com>
1017 Date: Tue May 8 10:23:56 2007 +0200
1019 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
1022 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
1023 Author: Bartlomiej Sieka <tur@semihalf.com>
1024 Date: Tue May 8 09:39:12 2007 +0200
1026 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
1027 eliminates networking problems in Linux (timeouts).
1029 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
1030 Author: Bartlomiej Sieka <tur@semihalf.com>
1031 Date: Tue May 8 09:21:57 2007 +0200
1033 [Motion-PRO] Enable Flat Device Tree support and modify default environment
1034 to allow booting of FDT-expecting kernels.
1036 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
1037 Author: Michal Simek <monstr@monstr.eu>
1038 Date: Mon May 7 23:58:31 2007 +0200
1040 new: USE_MSR_INTR support
1042 commit 008861a2f3ef2c062744d733787c7e530a1b8761
1043 Author: Bartlomiej Sieka <tur@semihalf.com>
1044 Date: Mon May 7 22:36:15 2007 +0200
1046 [MPC5xxx] There are networking problems on the Motion-PRO board with
1047 current PHY initalization code (tftp timeouts all the time). This commit
1048 temporarily disables PHY initalization sequence to make the networking
1049 operational, until a fix is found.
1051 commit abca901869c3760b6c5fecb825db6c1d91a78a93
1052 Author: Wolfgang Denk <wd@denx.de>
1053 Date: Mon May 7 22:10:36 2007 +0200
1055 Get rid of duplicated file (see include/configs/sbc8560.h instead)
1057 Signed-off-by: Wolfgang Denk <wd@denx.de>
1059 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
1060 Author: Wolfgang Denk <wd@denx.de>
1061 Date: Mon May 7 22:07:08 2007 +0200
1063 Get rid of duplicated file (see doc/README.SBC8560 instead)
1065 Signed-off-by: Wolfgang Denk <wd@denx.de>
1067 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
1068 Author: Michal Simek <monstr@monstr.eu>
1069 Date: Mon May 7 19:43:10 2007 +0200
1071 fix: read and write MSR - repair number of parameters
1073 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
1074 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1075 Date: Mon May 7 19:42:49 2007 +0200
1077 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
1079 A '3' got cut off in the formatting of the last patch to automatically
1080 change the clock speed of the system clock on sequoia board.
1082 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1083 Signed-off-by: Stefan Roese <sr@denx.de>
1085 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
1086 Author: Michal Simek <monstr@monstr.eu>
1087 Date: Mon May 7 19:33:51 2007 +0200
1089 new: fsl interrupt support
1090 FSL_Has_data is connected to INTC.
1092 commit 792032baa7d625e34c981ab6df521911bd8dc861
1093 Author: Michal Simek <monstr@monstr.eu>
1094 Date: Mon May 7 19:30:12 2007 +0200
1096 fix: interrupt handler
1099 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
1100 Author: Michal Simek <monstr@monstr.eu>
1101 Date: Mon May 7 19:25:08 2007 +0200
1103 fix: remove asm code
1105 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
1106 Author: Michal Simek <monstr@monstr.eu>
1107 Date: Mon May 7 19:12:43 2007 +0200
1109 fix: clean interrupt
1111 commit 42efed6130c8fcf7da881385b5427065d2801757
1112 Author: Michal Simek <monstr@monstr.eu>
1113 Date: Mon May 7 17:22:25 2007 +0200
1115 fix: interrupt handler for multiple sources
1117 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
1118 Author: Michal Simek <monstr@monstr.eu>
1119 Date: Mon May 7 17:11:09 2007 +0200
1121 new: add writing to msr register
1123 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
1124 Author: Timur Tabi <timur@freescale.com>
1125 Date: Sat May 5 08:12:30 2007 +0200
1127 5xxx: write MAC address to mac-address and local-mac-address
1129 Some device trees have a mac-address property, some have local-mac-address,
1130 and some have both. To support all of these device trees, ftp_cpu_setup()
1131 should write the MAC address to mac-address and local-mac-address, if they
1134 Signed-off-by: Timur Tabi <timur@freescale.com>
1135 Acked-by: Grant Likely <grant.likely@secretlab.ca>
1137 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
1138 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1139 Date: Sun Apr 29 14:01:54 2007 +0200
1141 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
1143 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
1144 message. Use PVR to distinguish between the two variants, and print proper CPU
1147 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1148 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1149 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1151 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
1152 Author: Ladislav Michl <ladis@linux-mips.org>
1153 Date: Wed Apr 25 16:01:26 2007 +0200
1155 [PATCH] simplify silent console
1157 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1158 Acked-by: Stefan Roese <sr@denx.de>
1160 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
1161 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1162 Date: Mon Apr 23 15:30:39 2007 +0200
1164 [PATCH] Avoid assigning PCI resources from zero address
1166 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
1167 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
1168 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
1169 sentence about "0" being considered an invalid address) -- so, use a reasonable
1170 starting value of 0x1000 (that's what the most Linux archs are using).
1172 Alternatively, one might have fixed the calls to pci_set_region() individually
1173 (some code even seems to have taken care of this issue) but that would have
1174 been a lot more work. :-)
1176 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1177 Acked-by: Stefan Roese <sr@denx.de>
1179 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
1180 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1181 Date: Mon Apr 23 14:00:11 2007 +0200
1183 [patch] setenv(...) can delete environmentalvariables
1185 update setenv() function so that entering a NULL value for the
1186 variable's value will delete the environmental variable
1188 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1189 Acked-by: Stefan Roese <sr@denx.de>
1191 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
1192 Author: Mike Frysinger <vapier@gentoo.org>
1193 Date: Mon Apr 23 13:54:24 2007 +0200
1195 [patch] use unsigned char in smc91111 driver for mac
1197 the v_mac variable in the smc91111 driver is declared as a signed char ...
1198 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
1199 because when it gets printed out, you get a display like:
1200 0xFFFFFFE0 and that's no good
1202 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1204 commit ffc50f9bb194343c6303517a517708457a5eb6b8
1205 Author: Michal Simek <monstr@monstr.eu>
1206 Date: Sat May 5 18:54:42 2007 +0200
1208 new: FSL and MSR support #2
1210 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
1211 Author: Michal Simek <monstr@monstr.eu>
1212 Date: Sat May 5 18:27:16 2007 +0200
1214 new: FSL and MSR support
1216 commit 2f15278c2eb911c668b4fe562130b78cf554d139
1217 Author: Wolfgang Denk <wd@denx.de>
1218 Date: Sat May 5 18:23:11 2007 +0200
1220 Coding stylke cleanup; update CHANGELOG.
1222 Signed-off-by: Wolfgang Denk <wd@denx.de>
1224 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
1225 Author: Wolfgang Denk <wd@denx.de>
1226 Date: Sat May 5 18:05:02 2007 +0200
1228 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
1230 Signed-off-by: Wolfgang Denk <wd@denx.de>
1232 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
1233 Author: Wolfgang Denk <wd@denx.de>
1234 Date: Sat May 5 17:15:50 2007 +0200
1236 Make "file" command happy with some config.mk files; update CHANGELOG
1238 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
1239 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1240 Date: Sat May 5 08:32:14 2007 +0200
1242 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
1244 The AMCC Secquoia board has been changed in a new revision from using a
1245 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
1246 indicates the difference. This patch reads that bit and uses the correct
1247 clock speed for the board. This code is backward compatable will all
1248 prior boards. All prior boards will be read as 33.000.
1250 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1251 Signed-off-by: Stefan Roese <sr@denx.de>
1253 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
1254 Author: Stefan Roese <sr@denx.de>
1255 Date: Sat May 5 08:29:01 2007 +0200
1257 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
1259 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
1260 for the 4k NAND boot image so define bus_frequency to 133MHz here
1261 which is save for the refresh counter setup.
1263 Signed-off-by: Stefan Roese <sr@denx.de>
1265 commit 2f550ab976405300f5b07bf2890800840d0aa05f
1266 Author: Timur Tabi <timur@freescale.com>
1267 Date: Sat May 5 08:12:30 2007 +0200
1269 5xxx: write MAC address to mac-address and local-mac-address
1271 Some device trees have a mac-address property, some have local-mac-address,
1272 and some have both. To support all of these device trees, ftp_cpu_setup()
1273 should write the MAC address to mac-address and local-mac-address, if they
1276 Signed-off-by: Timur Tabi <timur@freescale.com>
1277 Acked-by: Grant Likely <grant.likely@secretlab.ca>
1279 commit a79886590593ba1d667c840caa4940c61639f18f
1280 Author: Thomas Knobloch <knobloch@siemens.com>
1281 Date: Sat May 5 07:04:42 2007 +0200
1283 NAND: Wrong calculation of page number in nand_block_bad()
1285 In case that there is no memory based bad block table available the
1286 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
1287 nand_block_bad() directly. When parameter 'getchip' is set to zero,
1288 nand_block_bad() will not right shift the offset to calculate the
1289 correct page number.
1291 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
1292 Signed-off-by: Stefan Roese <sr@denx.de>
1294 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
1295 Author: Wolfgang Denk <wd@denx.de>
1296 Date: Fri May 4 10:02:33 2007 +0200
1298 Fix initrd length corruption in bootm command.
1300 When using FDT Images, the length of an inital ramdisk was
1301 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
1303 Patches by Timur Tabi & Johns Daniel.
1305 Signed-off-by: Wolfgang Denk <wd@denx.de>
1307 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
1308 Author: Kim Phillips <kim.phillips@freescale.com>
1309 Date: Thu May 3 19:43:52 2007 -0500
1311 mpc83xx: fix trivial error in MAKEALL
1313 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1315 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
1316 Author: Wolfgang Denk <wd@denx.de>
1317 Date: Thu May 3 16:34:41 2007 +0200
1319 Update board configuration for STX GP3SSA board:
1321 Enable hush shell, environment in flash rather in EEPROM,
1322 more user-friendly default environment, etc.
1323 The simple EEPROM environment can be selected easily in the board
1326 Signed-off-by: Wolfgang Denk <wd@denx.de>
1328 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
1329 Author: Wolfgang Denk <wd@denx.de>
1330 Date: Tue Apr 24 14:37:49 2007 +0200
1332 Cleanup STX GP3SSA code; fix build and compile problems.
1334 commit 35171dc04e028ecacc23ad916a66295472555dbf
1335 Author: Dan Malek <dan@embeddedalley.com>
1336 Date: Fri Jan 5 09:15:34 2007 +0100
1338 Add support for STX GP3SSA (stxssa) Board
1340 Signed-off-by Dan Malek, <dan@embeddedalley.com>
1342 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
1343 Author: Andy Fleming <afleming@freescale.com>
1344 Date: Sat Feb 24 01:08:13 2007 -0600
1346 Cleaned up some 85xx PCI bugs
1348 * Cleaned up the CDS PCI Config Tables and added NULL entries to
1350 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
1351 * Fixed 85xx PCI code to assign powar region sizes based on the
1352 config values (rather than hard-coding them)
1353 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
1355 Signed-off-by: Andy Fleming <afleming@freescale.com>
1357 commit 6743105988fc44d5b0d30388c790607835aae7a6
1358 Author: Andy Fleming <afleming@freescale.com>
1359 Date: Mon Apr 23 02:54:25 2007 -0500
1361 Add support for the 8568 MDS board
1363 This included some changes to common files:
1364 * Add 8568 processor SVR to various places
1365 * Add support for setting the qe bus-frequency value in the dts
1366 * Add the 8568MDS target to the Makefile
1368 Signed-off-by: Andy Fleming <afleming@freescale.com>
1370 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
1371 Author: David Updegraff <dave@cray.com>
1372 Date: Fri Apr 20 14:34:48 2007 -0500
1374 Add support for treating unknown PHYs as generic PHYs.
1376 When bringing up u-boot on new boards, PHY support sometimes gets
1377 neglected. Most PHYs don't really need any special support,
1378 though. By adding a generic entry that always matches if nothing
1379 else does, we can provide support for "unsupported" PHYs for the
1382 The generic PHY driver supports most PHYs, including gigabit.
1384 Signed-off-by: David Updegraff <dave@cray.com>
1385 Signed-off-by: Andy Fleming <afleming@freescale.com>
1387 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
1388 Author: James Yang <James.Yang@freescale.com>
1389 Date: Wed Feb 7 15:28:04 2007 -0600
1391 Conditionalize 8641 Rev1.0 MCM workarounds
1393 Signed-off-by: James Yang <James.Yang@freescale.com>
1394 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1396 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
1397 Author: Timur Tabi <timur@freescale.com>
1398 Date: Mon Apr 30 13:59:50 2007 -0500
1400 Fix memory initialization on MPC8349E-mITX
1402 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
1403 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
1404 on some ITX boards, notably those with a revision 3.1 CPU.
1406 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
1407 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
1409 Signed-off-by: Timur Tabi <timur@freescale.com>
1410 Acked-by: Michael Benedict <MBenedict@twacs.com>
1411 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1413 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
1414 Author: Kim Phillips <kim.phillips@freescale.com>
1415 Date: Mon Apr 30 15:26:21 2007 -0500
1417 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
1419 and fix CPU: to align with Board: display text.
1421 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1423 commit c1ab82669d9525998c34e802a12cad662723f22a
1424 Author: James Yang <James.Yang@freescale.com>
1425 Date: Fri Mar 16 13:02:53 2007 -0500
1427 Rewrote picos_to_clk() to avoid rounding errors.
1428 Clarified that conversion is to DRAM clocks rather than platform clocks.
1429 Made function static to spd_sdram.c.
1431 Signed-off-by: James Yang <James.Yang@freescale.com>
1432 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1434 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
1435 Author: Stefan Roese <sr@denx.de>
1436 Date: Sun Apr 29 14:13:01 2007 +0200
1438 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
1440 Signed-off-by: Stefan Roese <sr@denx.de>
1442 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
1443 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1444 Date: Sun Apr 29 14:01:54 2007 +0200
1446 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
1448 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
1449 message. Use PVR to distinguish between the two variants, and print proper CPU
1452 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1453 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1454 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1456 commit 5c5d3242935cf3543af01142627494434834cf98
1457 Author: Kim Phillips <kim.phillips@freescale.com>
1458 Date: Wed Apr 25 12:34:38 2007 -0500
1460 mpc83xx: minor fixups for 8313rdb introduction
1462 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
1463 Author: Ladislav Michl <ladis@linux-mips.org>
1464 Date: Wed Apr 25 16:01:26 2007 +0200
1466 [PATCH] simplify silent console
1468 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1469 Acked-by: Stefan Roese <sr@denx.de>
1471 commit 144876a380f5756f57412caf74c1d6dc201dd796
1472 Author: Michal Simek <monstr@monstr.eu>
1473 Date: Tue Apr 24 23:01:02 2007 +0200
1475 [PATCH] MTD partition support, JFFS2 support
1477 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
1478 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1479 Date: Tue Apr 24 14:03:45 2007 +0200
1481 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
1483 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1485 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
1486 Author: Andy Fleming <afleming@freescale.com>
1487 Date: Mon Apr 23 02:37:47 2007 -0500
1489 Reworked 85xx speed detection code
1491 Changed the code to read the registers and calculate the clock
1492 rates, rather than using a "switch" statement.
1494 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
1496 Signed-off-by: Andy Fleming <afleming@freescale.com>
1498 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
1499 Author: Andy Fleming <afleming@freescale.com>
1500 Date: Mon Apr 23 02:24:28 2007 -0500
1504 * Add support to the Makefile
1505 * Add 8544 configuration support to the tsec driver
1506 * Add 8544 SVR numbers to processor.h
1508 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1509 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1511 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
1512 Author: Andy Fleming <afleming@freescale.com>
1513 Date: Fri Feb 23 17:12:25 2007 -0600
1515 Support 1G size on 8548
1517 e500v2 and newer cores support 1G page sizes.
1519 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1520 Signed-off-by: Andy Fleming <afleming@freescale.com>
1522 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
1523 Author: Andy Fleming <afleming@freescale.com>
1524 Date: Fri Feb 23 17:11:16 2007 -0600
1526 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
1528 The other pagesz constants use one letter to specify order of
1529 magnitude. Also change the one reference to it in mpc8548cds/init.S
1531 Signed-off-by: Andy Fleming <afleming@freescale.com>
1533 commit 1f9a318cea14272edd10d63739e2d326c90f430e
1534 Author: Andy Fleming <afleming@freescale.com>
1535 Date: Fri Feb 23 16:28:46 2007 -0600
1537 Only set ddrioovcr for 8548 rev1.
1539 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1540 Signed-off-by: Andy Fleming <afleming@freescale.com>
1542 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
1543 Author: Andy Fleming <afleming@freescale.com>
1544 Date: Sat Feb 24 01:16:45 2007 -0600
1546 Tweak DDR ECC error counter
1548 Enable single-bit error counter when memory was cleared by ddr controller.
1550 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1551 Signed-off-by: Andy Fleming <afleming@freescale.com>
1553 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
1554 Author: Timur Tabi <timur@freescale.com>
1555 Date: Mon Feb 12 13:34:55 2007 -0600
1557 85xx: write MAC address to mac-address and local-mac-address
1559 Some device trees have a mac-address property, some have local-mac-address,
1560 and some have both. To support all of these device trees, ftp_cpu_setup()
1561 should write the MAC address to mac-address and local-mac-address, if they
1564 Signed-off-by: Timur Tabi <timur@freescale.com>
1566 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
1567 Author: Andy Fleming <afleming@freescale.com>
1568 Date: Mon Apr 23 01:44:44 2007 -0500
1570 Some 85xx cpu cleanups
1572 * Cleaned up the TSR[WIS] clearing
1573 * Cleaned up DMA initialization
1575 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1577 Acked-by: Andy Fleming <afleming@freescale.com>
1579 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
1580 Author: Andy Fleming <afleming@freescale.com>
1581 Date: Mon Apr 23 01:32:22 2007 -0500
1583 Add cpu support for the 8544
1585 Recognize new SVR values, and add a few register definitions
1587 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1588 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1589 Acked-by: Andy Fleming <afleming@freescale.com>
1591 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
1592 Author: Jon Loeliger <jdl@freescale.com>
1593 Date: Wed Apr 11 16:51:02 2007 -0500
1595 Add MPC8544DS basic port board files.
1597 Add board port under new board/freescale directory
1598 structure and reuse existing PIXIS FPGA support there.
1600 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1601 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1603 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
1604 Author: Jon Loeliger <jdl@freescale.com>
1605 Date: Wed Apr 11 16:50:57 2007 -0500
1607 Add MPC8544DS main configuration file.
1609 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1610 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1612 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
1613 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1614 Date: Wed Dec 27 22:07:15 2006 +0300
1616 Fix PCI I/O space mapping on Freescale MPC85x0ADS
1618 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
1619 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
1620 describing the local address window used for the PCI I/O space accesses -- fix
1621 this and carry over the necessary changes into the MPC8560ADS code since the
1622 PCI I/O space mapping was also broken for this board (by the earlier commit
1623 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
1624 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
1626 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1628 board/mpc8540ads/init.S | 4 ++--
1629 board/mpc8560ads/init.S | 4 ++--
1630 include/configs/MPC8540ADS.h | 5 ++---
1631 include/configs/MPC8541CDS.h | 2 +-
1632 include/configs/MPC8548CDS.h | 2 +-
1633 include/configs/MPC8560ADS.h | 8 ++++----
1634 6 files changed, 12 insertions(+), 13 deletions(-)
1636 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
1637 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1638 Date: Tue Dec 5 16:42:30 2006 +0800
1640 u-boot: Fix e500 v2 core reset bug
1642 The following patch fixes the e500 v2 core reset bug.
1643 For e500 v2 core, a new reset control register is added to reset the
1646 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1648 commit 63247a5acd58032e6cf33f525bc3923b467bac88
1649 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1650 Date: Wed Dec 20 11:01:00 2006 +0800
1652 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
1654 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
1655 entry number to control the loop. This can reduce the potential risk
1656 for the 85xx processor increasing its TLB adn LAW entry number.
1658 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
1659 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1661 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
1662 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1663 Date: Mon Dec 18 17:01:04 2006 +0800
1665 u-boot: Fix the 85xxcds tsec bug
1667 Fix the 85xxcds tsec bug.
1668 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
1670 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1672 commit 7337b237ffc4aaf1b9467024fe472a880d852598
1673 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1674 Date: Fri Dec 15 14:43:31 2006 +0800
1676 u-boot: Fix CPU2 errata on MPC8548CDS board
1678 This patch apply workaround of CPU2 errata on MPC8548CDS board.
1680 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
1682 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
1683 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
1684 Date: Mon Dec 18 16:25:15 2006 +0800
1686 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
1688 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
1690 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
1692 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
1693 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1694 Date: Thu Dec 14 14:14:55 2006 +0800
1696 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
1698 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
1700 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1702 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
1703 Author: Scott Wood <scottwood@freescale.com>
1704 Date: Mon Apr 16 14:54:15 2007 -0500
1706 mpc83xx: Add MPC8313ERDB support.
1708 Signed-off-by: Scott Wood <scottwood@freescale.com>
1710 commit 49ea3b6eafe606285ae4d5c378026153dde53200
1711 Author: Scott Wood <scottwood@freescale.com>
1712 Date: Mon Apr 16 14:34:21 2007 -0500
1714 mpc83xx: Add generic PCI setup code.
1716 Board code can now request the generic setup code rather than having to
1717 copy-and-paste it for themselves. Boards should be converted to use this
1718 once they're tested with it.
1720 Signed-off-by: Scott Wood <scottwood@freescale.com>
1722 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
1723 Author: Scott Wood <scottwood@freescale.com>
1724 Date: Mon Apr 16 14:34:19 2007 -0500
1726 mpc83xx: Add 831x support to speed.c.
1728 Signed-off-by: Scott Wood <scottwood@freescale.com>
1730 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
1731 Author: Scott Wood <scottwood@freescale.com>
1732 Date: Mon Apr 16 14:34:18 2007 -0500
1734 mpc83xx: Add 831x support to global_data.h
1736 Signed-off-by: Scott Wood <scottwood@freescale.com>
1738 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
1739 Author: Scott Wood <scottwood@freescale.com>
1740 Date: Mon Apr 16 14:34:16 2007 -0500
1742 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
1744 Rather than misleadingly define PVR_83xx as the specific type of 83xx
1745 being built for, the PVR of each core revision is defined. checkcpu() now
1746 prints the core that it detects, rather than aborting if it doesn't find
1747 what it thinks it wants.
1749 Signed-off-by: Scott Wood <scottwood@freescale.com>
1751 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
1752 Author: Scott Wood <scottwood@freescale.com>
1753 Date: Mon Apr 16 14:34:15 2007 -0500
1755 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
1757 Signed-off-by: Scott Wood <scottwood@freescale.com>
1759 commit d87c57b201b4572d16f1b642998faa00c9912b16
1760 Author: Scott Wood <scottwood@freescale.com>
1761 Date: Mon Apr 16 14:31:55 2007 -0500
1763 mpc83xx: Add register definitions for MPC831x.
1765 Signed-off-by: Scott Wood <scottwood@freescale.com>
1767 commit 7fc4c71a143be8666d70803fb25ae60379c95622
1768 Author: Stefan Roese <sr@denx.de>
1769 Date: Mon Apr 23 15:39:59 2007 +0200
1773 Signed-off-by: Stefan Roese <sr@denx.de>
1775 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
1776 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1777 Date: Mon Apr 23 15:30:39 2007 +0200
1779 [PATCH] Avoid assigning PCI resources from zero address
1781 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
1782 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
1783 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
1784 sentence about "0" being considered an invalid address) -- so, use a reasonable
1785 starting value of 0x1000 (that's what the most Linux archs are using).
1787 Alternatively, one might have fixed the calls to pci_set_region() individually
1788 (some code even seems to have taken care of this issue) but that would have
1789 been a lot more work. :-)
1791 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1792 Acked-by: Stefan Roese <sr@denx.de>
1794 commit afb903a2eb9436baa9270ccc0c27082d86497d89
1795 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1796 Date: Mon Apr 23 14:00:11 2007 +0200
1798 [patch] setenv(...) can delete environmentalvariables
1800 update setenv() function so that entering a NULL value for the
1801 variable's value will delete the environmental variable
1803 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1804 Acked-by: Stefan Roese <sr@denx.de>
1806 commit 36f104e5caa747d568eff26b369565af57c2ffa6
1807 Author: Mike Frysinger <vapier@gentoo.org>
1808 Date: Mon Apr 23 13:54:24 2007 +0200
1810 [patch] use unsigned char in smc91111 driver for mac
1812 the v_mac variable in the smc91111 driver is declared as a signed char ...
1813 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
1814 because when it gets printed out, you get a display like:
1815 0xFFFFFFE0 and that's no good
1817 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1819 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
1820 Author: Stefan Roese <sr@denx.de>
1821 Date: Mon Apr 23 12:00:22 2007 +0200
1823 Remove BOARDLIBS usage completely
1825 Signed-off-by: Stefan Roese <sr@denx.de>
1827 commit 32556443840f127170e4baa8bdd5b567039f6c36
1828 Author: Michal Simek <monstr@monstr.eu>
1829 Date: Sat Apr 21 21:07:22 2007 +0200
1831 [PATCH] SystemACE support for Microblaze
1833 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
1834 Author: Michal Simek <monstr@monstr.eu>
1835 Date: Sat Apr 21 21:02:40 2007 +0200
1837 16bit read/write little endian
1839 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
1840 Author: Michal Simek <monstr@monstr.eu>
1841 Date: Sat Apr 21 20:53:31 2007 +0200
1843 Change ML401 parameters - Xilinx BSP
1845 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
1846 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1847 Date: Wed Feb 28 05:37:29 2007 -0600
1849 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
1851 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1853 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
1854 Author: Zhang Wei <wei.zhang@freescale.com>
1855 Date: Fri Jan 19 10:42:37 2007 +0800
1857 Enable LAWs for MPC8641 PCI-Ex2.
1859 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
1860 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1862 commit bd7851ce1e1f140665b520026abf1042968b1102
1863 Author: Jon Loeliger <jdl@freescale.com>
1864 Date: Fri Apr 20 14:12:26 2007 -0500
1866 mpc86xx; Write MAC address to mac-address and local-mac-address
1868 Some device trees have a mac-address property, some have local-mac-address,
1869 and some have both. To support all of these device trees, ftp_cpu_setup()
1870 should write the MAC address to mac-address and local-mac-address, if they
1873 Signed-off-by: Timur Tabi <timur@freescale.com>
1874 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1876 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
1877 Author: Jon Loeliger <jdl@freescale.com>
1878 Date: Fri Apr 20 14:11:38 2007 -0500
1880 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
1882 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1885 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
1886 Author: Wolfgang Denk <wd@denx.de>
1887 Date: Fri Apr 20 17:43:28 2007 +0200
1889 Cleanup compiler warnings, update CHANGELOG
1891 Signed-off-by: Wolfgang Denk <wd@denx.de>
1893 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
1894 Author: Detlev Zundel <dzu@denx.de>
1895 Date: Fri Apr 20 12:01:47 2007 +0200
1897 Fix breakage of NC650 board with respect to nand support.
1899 Signed-off-by: Detlev Zundel <dzu@denx.de>
1901 commit 39f23cd90947639ac278a18ff277ec786b5ac167
1902 Author: Domen Puncer <domen.puncer@telargo.com>
1903 Date: Fri Apr 20 11:13:16 2007 +0200
1905 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
1907 G2 core reference manual says decrementer and time base
1908 are decreasing/increasing once every 4 bus clock cycles.
1909 Lets fix it, so time in Linux won't run twice as fast
1911 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
1912 Acked-by: Grant Likely <grant.likely@secretlab.ca>
1914 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
1915 Author: Gerald Van Baren <vanbaren@cideas.com>
1916 Date: Thu Apr 19 23:14:39 2007 -0400
1918 Fix serious pointer bug with bootm and reserve map.
1920 What was suppose to be a stack variable was declared as a pointer,
1921 overwriting random memory.
1922 Also moved the libfdt.a requirement into the main Makefile. That is
1925 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
1926 Author: Stefan Roese <sr@denx.de>
1927 Date: Thu Apr 19 09:53:52 2007 +0200
1929 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
1931 Previous versions used full wait states for the chip select #1 which
1932 is connected to the Xilinix SystemACE controller on the AMCC Katmai
1933 evaluation board. This leads to really slow access and therefore low
1934 performance. This patch now sets up the chip select a lot faster
1935 resulting in much better read/write performance of the Linux driver.
1937 Signed-off-by: Stefan Roese <sr@denx.de>
1939 commit 37837828d89084879bee2f2b8c7c68d4695940df
1940 Author: Wolfgang Denk <wd@denx.de>
1941 Date: Wed Apr 18 17:49:29 2007 +0200
1943 Clenaup, update CHANGELOG
1945 Signed-off-by: Wolfgang Denk <wd@denx.de>
1947 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
1948 Author: Wolfgang Denk <wd@denx.de>
1949 Date: Wed Apr 18 17:20:58 2007 +0200
1953 Signed-off-by: Wolfgang Denk <wd@denx.de>
1955 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
1956 Author: Wolfgang Denk <wd@denx.de>
1957 Date: Wed Apr 18 17:07:26 2007 +0200
1959 Cleanup, update CHANGELOG
1961 Sigend-off-by: Wolfgang Denk <wd@denx.de>
1963 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
1964 Author: Wolfgang Denk <wd@denx.de>
1965 Date: Wed Apr 18 16:17:46 2007 +0200
1969 commit ad4eb555671d97f96dc56eab55103b1f86874b01
1970 Author: Wolfgang Denk <wd@denx.de>
1971 Date: Wed Apr 18 14:30:39 2007 +0200
1973 MCC200 board: remove warning which is obsolete after PSoC firmware changes
1975 Signed-off-by: Wolfgang Denk <wd@denx.de>
1977 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
1978 Author: Domen Puncer <domen.puncer@telargo.com>
1979 Date: Wed Apr 18 12:11:05 2007 +0200
1981 [PATCH] icecube/lite5200b: document wakeup from low-power support
1983 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
1985 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
1986 Author: Stefan Roese <sr@denx.de>
1987 Date: Wed Apr 18 12:07:47 2007 +0200
1989 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
1991 Signed-off-by: Stefan Roese <sr@denx.de>
1993 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
1994 Author: Stefan Roese <sr@denx.de>
1995 Date: Wed Apr 18 12:05:59 2007 +0200
1997 ppc4xx: Add output for bootrom location to 405EZ ports
1999 Now 405EZ ports also show upon bootup from which boot device
2000 they are configured to boot:
2002 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
2004 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
2005 Bootstrap Option E - Boot ROM Location EBC (32 bits)
2006 16 kB I-Cache 16 kB D-Cache
2007 Board: Acadia - AMCC PPC405EZ Evaluation Board
2009 Signed-off-by: Stefan Roese <sr@denx.de>
2011 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
2012 Author: Peter Pearse <peter.pearse@arm.com>
2013 Date: Tue Apr 17 13:30:33 2007 +0100
2015 Move ppearse to ARM board list
2016 Add Konstantin Kletschke for scb9328.
2017 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
2019 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
2020 Author: Domen Puncer <domen.puncer@telargo.com>
2021 Date: Mon Apr 16 14:00:13 2007 +0200
2023 [PATCH] icecube/lite5200b: wakeup from low-power support
2025 U-Boot part of Lite5200b low power mode support.
2026 Puts SDRAM out of self-refresh and transfers control to
2027 address saved at physical 0x0.
2029 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
2030 Acked-by: Grant Likely <grant.likely@secretlab.ca>
2032 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
2033 Author: Gerald Van Baren <vanbaren@cideas.com>
2034 Date: Sun Apr 15 13:54:26 2007 -0400
2036 Fix the ft_cpu_setup() property settings.
2038 Use "setter" functions instead of flags, cleaner and more flexible.
2039 It also fixes the problem noted by Timur Tabi that the ethernet MAC
2040 addresses were all being set incorrectly to the same MAC address.
2042 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
2043 Author: Gerald Van Baren <vanbaren@cideas.com>
2044 Date: Sat Apr 14 22:51:24 2007 -0400
2046 Improve the bootm command for CONFIG_OF_LIBFDT
2048 In bootm, create the "/chosen" node only if it doesn't already exist
2049 (better matches the previous behavior).
2050 Update for proper reserved memory map handling for initrd.
2052 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
2053 Author: Gerald Van Baren <vanbaren@cideas.com>
2054 Date: Sat Apr 14 22:46:41 2007 -0400
2056 Add some utilities to manipulate the reserved memory map.
2058 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
2059 Author: Wolfgang Denk <wd@denx.de>
2060 Date: Sat Apr 14 21:16:54 2007 +0200
2064 commit 8e6875183cdca91c134408d119d4abcd48ef6856
2065 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2066 Date: Sun Dec 17 18:56:46 2006 +0100
2068 AVR32: Enable MMC support
2070 Set up the portmux for the MMC interface and enable the MMC driver
2071 along with support for DOS partitions, ext2 and FAT filesystems.
2073 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2075 commit fc26c97bb6df41b4a95662c34054fe912387bf38
2076 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2077 Date: Fri Jan 20 10:03:53 2006 +0100
2081 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
2083 The AT91 ARM-based CPUs use basically the same hardware, so it should
2084 be possible to share this driver, but no effort has been made so far.
2086 Hardware documentation can be found in the AT32AP7000 data sheet,
2087 which can be downloaded from
2089 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
2091 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2093 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
2094 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2095 Date: Sun Dec 17 18:55:37 2006 +0100
2097 AVR32: Add clk and gpio infrastructure for mmci
2099 Implement functions for configuring the mmci pins, as well as
2100 functions for getting the clock rate of the mmci controller.
2102 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2104 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
2105 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2106 Date: Sun Dec 17 18:53:56 2006 +0100
2108 Enable partition support with MMC
2110 Include implementations of init_part() and get_partition_info() when
2113 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2115 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
2116 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2117 Date: Sun Dec 17 17:14:30 2006 +0100
2119 AVR32: Enable networking
2121 Implement MACB initialization for AVR32 and ATSTK1000, and turn
2122 everything on, including the MACB driver.
2124 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2126 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
2127 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2128 Date: Fri Jan 20 10:03:34 2006 +0100
2130 Atmel MACB ethernet driver
2132 Driver for the Atmel MACB on-chip ethernet controller.
2134 This driver has been tested on the ATSTK1000 board with a AT32AP7000
2135 CPU. It should probably work on AT91SAM926x as well with some minor
2138 Hardware documentation can be found in the AT32AP7000 data sheet,
2139 which can be downloaded from
2141 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
2143 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2145 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
2146 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2147 Date: Sun Dec 17 16:56:14 2006 +0100
2149 AVR32: Add clk and gpio infrastructure for macb0 and macb1
2151 Implement functions for configuring the macb0 and macb1 pins, as
2152 well as functions for getting the clock rate of the various
2153 busses the macb ethernet controllers are connected to.
2155 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2157 commit d5acb95b16a0a74c643524342c3437e765426d05
2158 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2159 Date: Sun Dec 17 15:39:15 2006 +0100
2161 AVR32: Implement simple DMA memory allocator
2163 Implement dma_alloc_coherent() which returns cache-aligned
2166 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2168 commit 91975b0fea773c9e681fea8cf3349669f27685ee
2169 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2170 Date: Sun Dec 17 15:46:02 2006 +0100
2172 Import <linux/mii.h> from the Linux kernel
2174 Instead of creating yet another set of MII register definitions
2175 in the macb driver, here's a complete set of definitions for everyone
2178 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2180 commit 1b804b229556a4d862da93c0ec94e79419364b2c
2181 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2182 Date: Wed Mar 21 19:47:36 2007 +0100
2184 AVR32: Include more commands for ATSTK1000
2186 Include the imi, imls and jffs commands sets by default on ATSTK1000.
2187 Also define CONFIG_BOOTARGS to something more useful, define
2188 CONFIG_BOOTCOMMAND and enable autoboot by default.
2190 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2192 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
2193 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2194 Date: Wed Mar 21 19:44:48 2007 +0100
2196 AVR32: Provide a definition of struct stat
2198 Copy the definition of struct stat from the Linux kernel.
2200 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2202 commit 12f099c08167a7a51aeee623bc16dafd0841271c
2203 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2204 Date: Sun Dec 17 14:46:06 2006 +0100
2206 AVR32: Use initdram() instead of board_init_memories()
2208 Conform to the "standard" interface and use initdram() instead of
2209 board_init_memories() on AVR32. This enables us to get rid of the
2210 sdram_size member of the global_data struct as well.
2212 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2214 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
2215 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2216 Date: Mon Nov 20 15:53:10 2006 +0100
2218 AVR32: Relocate u-boot to SDRAM
2220 Relocate the u-boot image into SDRAM like everyone else does. This
2221 means that we can handle much larger .data and .bss than we used to.
2223 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2225 commit df548d3c3e2bbc40258713167859ffc2ce99a900
2226 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2227 Date: Sun Nov 19 18:06:53 2006 +0100
2229 AVR32: Resource management rewrite
2231 Rewrite the resource management code (i.e. I/O memory, clock gating,
2232 gpio) so it doesn't depend on any global state. This is necessary
2233 because this code is heavily used before relocation to RAM, so we
2234 can't write to any global variables.
2236 As an added bonus, this makes u-boot's memory footprint a bit smaller,
2237 although some functionality has been left out; all clocks are enabled
2238 all the time, and there's no checking for gpio line conflicts.
2240 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2242 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
2243 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2244 Date: Sat Nov 18 18:01:13 2006 +0100
2246 AVR32: Clean up memory-map.h for at32ap7000
2248 Convert spaces to tabs (must have missed this one last time around),
2249 sort the entries by address and group them together by bus
2252 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2254 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
2255 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2256 Date: Sat Nov 18 17:32:31 2006 +0100
2258 AVR32: Build position-independent u-boot
2260 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
2261 position independent. This will make relocation a lot easier.
2263 -mno-init-got means that gcc shouldn't emit code to load the GOT
2264 address into r6 in every function prologue. We do it once and for
2265 all in the early startup assembly code, so enabling this option
2266 makes u-boot a bit faster and smaller.
2268 The assembly parts have always been position-independent, so no code
2269 changes should be necessary.
2271 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2273 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
2274 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2275 Date: Sat Nov 18 17:24:31 2006 +0100
2277 AVR32: Use avr32-linux- cross-compilation prefix by default
2279 It doesn't really matter which toolchain you use to compile u-boot,
2280 but the avr32-linux one is probably what most people have installed.
2282 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2284 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
2285 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2286 Date: Sat Nov 18 17:15:30 2006 +0100
2288 AVR32: Split start_u_boot into board_init_f and board_init_r
2290 Split the avr32 initialization code into a function to run before
2291 relocation, board_init_f and a function to run after relocation,
2292 board_init_r. For now, board_init_f simply calls board_init_r
2295 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2297 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
2298 Author: Heiko Schocher <hs@pollux.denx.de>
2299 Date: Sat Apr 14 05:26:48 2007 +0200
2301 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
2302 clear the Display after reset.
2304 Signed-off-by: Heiko Schocher <hs@denx.de>
2306 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
2307 Author: Denis Peter <d.peter@mpl.ch>
2308 Date: Fri Apr 13 09:13:33 2007 +0200
2310 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
2312 Fix bug introduced by "Fix get_partition_info() parameter error in all
2313 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
2314 to use diskboot or scsiboot form another device than 0.
2316 Signed-off-by: Denis Peter <d.peter@mpl.ch>
2318 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
2319 Author: Greg Lopp <lopp@pobox.com>
2320 Date: Fri Apr 13 08:02:24 2007 +0200
2322 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
2324 Signed-of-by: Greg Lopp <lopp@pobox.com>
2325 Acked-by: Grant Likely <grant.likely@secretlab.ca>
2327 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
2328 Author: Xie Xiaobo <r63061@freescale.com>
2329 Date: Fri Mar 9 19:08:25 2007 +0800
2331 Fix two bugs for MPC83xx DDR2 controller SPD Init
2333 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
2334 the first bug is that the picos_to_clk routine introduces a huge
2335 rounding error in 83xx.
2336 the second bug is that the mode register write recovery field is
2337 tWR-1, not tWR >> 1.
2339 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
2340 Author: Jeffrey Mann <mannj@embeddedplanet.com>
2341 Date: Thu Apr 12 14:15:59 2007 +0200
2343 ppc4xx: Fix i2c divisor calcularion for PPC4xx
2345 This patch fixes changes the i2c_init(...) function to use the function
2346 get_OPB_freq() rather than calculating the OPB speed by
2347 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
2348 specific per processor. The prior method was not and so was calculating
2349 the wrong speed for some PPC4xx processors.
2351 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
2352 Signed-off-by: Stefan Roese <sr@denx.de>
2354 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
2355 Author: Wolfgang Denk <wd@denx.de>
2356 Date: Wed Apr 11 17:25:01 2007 +0200
2360 Signed-off-by: Wolfgang Denk <wd@denx.de>
2362 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
2363 Author: Wolfgang Denk <wd@denx.de>
2364 Date: Wed Apr 11 17:22:55 2007 +0200
2366 Update for SC3 board
2368 * Make IDE timeout configurable through ide_reset_timeout variable.
2369 * Use Newline as "password" string
2370 * Use just a single partition in NAND flash
2372 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
2373 Author: Haiying Wang <haiying.wang@freescale.com>
2374 Date: Mon Jan 22 12:37:30 2007 -0600
2376 Add PIXIS FPGA support for MPC8641HPCN board.
2378 Move the 8641HPCN's PIXIS code to the new directory
2379 board/freescale/common/ as it will be shared by
2380 future boards not in the same processor family.
2382 Write a "pixis_reset" command that utilizes the FPGA
2383 reset sequencer to support alternate soft-reset options
2384 such as using the "alternate" flash bank, enabling
2385 the watch dog, or choosing different CPU frequencies.
2387 Add documentation for the pixis_reset to README.mpc8641hpcn.
2389 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2390 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2392 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
2393 Author: Gerald Van Baren <vanbaren@cideas.com>
2394 Date: Fri Apr 6 14:19:43 2007 -0400
2396 Moved fdt command support code to fdt_support.c
2398 ...in preparation for improving the bootm command's handling of fdt blobs.
2399 Also cleaned up some coding sloppiness.
2401 commit 6679f9299534e488a171a9bb8f9bb891de247aab
2402 Author: Gerald Van Baren <vanbaren@cideas.com>
2403 Date: Fri Apr 6 14:17:14 2007 -0400
2405 libfdt: Make fdt_check_header() public
2407 Changed _fdt_check_header() to fdt_check_header() and made it part of
2408 the interface - it is a useful routine.
2410 Also did some asthetics cleanup to the include files (headers).
2412 commit c0707ce65677650b5ceab0500ee50ae5168afef2
2413 Author: Aubrey Li <aubrey.adi@gmail.com>
2414 Date: Thu Apr 5 18:34:06 2007 +0800
2416 [Blackfin][PATCH] Kill off a bunch of common local prototypes
2418 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
2419 Author: Aubrey Li <aubrey.adi@gmail.com>
2420 Date: Thu Apr 5 18:33:04 2007 +0800
2422 [Blackfin][PATCH] Fix dynamic CPLB generation issue
2424 commit 0445e3a264251d75b1be45ef713c70726a2952f0
2425 Author: Aubrey Li <aubrey.adi@gmail.com>
2426 Date: Thu Apr 5 18:31:47 2007 +0800
2428 [Blackfin][PATCH] minior cleanup
2430 commit 155fd766573981090e638b493d5857562151862e
2431 Author: Aubrey Li <aubrey.adi@gmail.com>
2432 Date: Thu Apr 5 18:31:18 2007 +0800
2434 [Blackfin][PATCH] Fix copyright and update license
2436 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
2437 Author: Aubrey Li <aubrey.adi@gmail.com>
2438 Date: Thu Apr 5 18:30:25 2007 +0800
2440 [Blackfin][PATCH] Add BF537 EMAC driver initialization
2442 commit 889256e8604e0c68db1d866d720894dffede9df6
2443 Author: Aubrey Li <aubrey.adi@gmail.com>
2444 Date: Thu Apr 5 18:29:55 2007 +0800
2446 [Blackfin][PATCH] call real the system synchronize instruction
2448 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
2449 Author: Aubrey Li <aubrey.adi@gmail.com>
2450 Date: Thu Apr 5 18:29:17 2007 +0800
2452 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
2454 commit dfeeab2cd680df047e68e723b246adf6f33bb556
2455 Author: Aubrey Li <aubrey.adi@gmail.com>
2456 Date: Thu Apr 5 18:28:34 2007 +0800
2458 [Blackfin][PATCH]: fix flash unaligned copy issue
2460 commit 443feb740584e406efa203af909fe2926608e8d5
2461 Author: Igor Marnat <marny@rambler.ru>
2462 Date: Wed Mar 21 09:55:01 2007 +0300
2464 Update usage of 'nc' in README.NetConsole
2466 Added information about usage of NetConsole on systems where the -l and -p
2467 switches are mutually exclusive.
2469 Signed-off-by: Igor Marnat <marny@rambler.ru>
2470 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2472 commit 31c98a88228021b314c89ebb8104fb6473da4471
2473 Author: Wolfgang Denk <wd@denx.de>
2474 Date: Wed Apr 4 02:09:30 2007 +0200
2476 Minor coding style cleanup.
2478 commit 94abd7c0583ebe01e799b25f451201deeaab550d
2479 Author: Wolfgang Denk <wd@denx.de>
2480 Date: Wed Apr 4 01:49:15 2007 +0200
2484 commit a65c5768e5537530bd1780af3d3fddc3113a163c
2485 Author: Stefan Roese <sr@denx.de>
2486 Date: Mon Apr 2 10:09:30 2007 +0200
2488 ppc4xx: Change SysACE address on Katmai
2490 With this new base address of the Xilinx SystemACE controller
2491 the Linux driver will be easier to adapt, since it can now be
2492 mapped via the "normal" ioremap() call.
2494 Signed-off-by: Stefan Roese <sr@denx.de>
2496 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
2497 Author: Gerald Van Baren <vanbaren@cideas.com>
2498 Date: Sat Mar 31 14:30:53 2007 -0400
2500 Fix some minor whitespace violations.
2502 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
2503 Author: Gerald Van Baren <vanbaren@cideas.com>
2504 Date: Sat Mar 31 12:23:51 2007 -0400
2506 Add a flattened device tree (fdt) command (2 of 2)
2508 Modifications to the existing code to support the new fdt command.
2510 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
2511 Author: Gerald Van Baren <vanbaren@cideas.com>
2512 Date: Sat Mar 31 12:22:10 2007 -0400
2514 Add a flattened device tree (fdt) command (1 of 2)
2516 The fdt command uses David Gibson's libfdt library to manipulate as well
2517 as print the flattened device tree. This patch is the new command,
2518 the second part is the modifications to the existing code.
2520 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
2521 Author: Gerald Van Baren <vanbaren@cideas.com>
2522 Date: Sat Mar 31 12:13:43 2007 -0400
2524 libfdt: Enhanced and published fdt_next_tag()
2526 Enhanced the formerly private function _fdt_next_tag() to allow stepping
2527 through the tree, used to produce a human-readable dump, and made
2528 it part of the published interface.
2529 Also added some comments.
2531 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
2532 Author: Gerald Van Baren <vanbaren@cideas.com>
2533 Date: Sat Mar 31 12:05:39 2007 -0400
2535 libfdt: Customizations for use by u-boot.
2537 Changes to David Gibson's original source to fit into u-boot's
2538 environment. No functionality changes.
2540 commit 35748177c64a4a83a00057e93bb33e40278a2a96
2541 Author: Gerald Van Baren <vanbaren@cideas.com>
2542 Date: Sat Mar 31 12:00:56 2007 -0400
2544 libfdt: Import libfdt source (2 of 2)
2546 This adds the applicable libfdt source files (unmodified) and a README
2547 to explain where the source came from.
2549 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
2550 Author: Gerald Van Baren <vanbaren@cideas.com>
2551 Date: Sat Mar 31 11:59:59 2007 -0400
2553 libfdt: Import libfdt source (1 of 2)
2555 This adds the applicable libfdt source files (unmodified) and a README
2556 to explain where the source came from.
2558 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
2559 Author: Stefan Roese <sr@denx.de>
2560 Date: Sat Mar 31 13:16:23 2007 +0200
2562 ppc4xx: Update Katmai bootstrap command
2564 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
2567 Signed-off-by: Stefan Roese <sr@denx.de>
2569 commit cabee756a6532986729477c3cc1ea16ef8517ad2
2570 Author: Stefan Roese <sr@denx.de>
2571 Date: Sat Mar 31 13:15:06 2007 +0200
2573 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
2575 Additional RAM information is now printed upon powerup, like
2576 DDR2 frequency and CAS latency.
2578 Signed-off-by: Stefan Roese <sr@denx.de>
2580 commit 60723803431ac75cad085690789e433d5ab9174e
2581 Author: Stefan Roese <sr@denx.de>
2582 Date: Sat Mar 31 08:48:36 2007 +0200
2584 ppc4xx: Change Yucca config file to support ECC
2586 With the updated 44x DDR2 driver the Yucca board now supports
2587 ECC generation and checking.
2589 Signed-off-by: Stefan Roese <sr@denx.de>
2591 commit 490e5730c674b20d708b783a2c5ffd7208f83873
2592 Author: Stefan Roese <sr@denx.de>
2593 Date: Sat Mar 31 08:47:34 2007 +0200
2595 ppc4xx: Fix "bootstrap" command for Katmai board
2597 The board specific "bootstrap" command is now fixed and can
2598 be used for the AMCC Katmai board to configure different
2599 CPU/PLB/OPB frequencies.
2601 Signed-off-by: Stefan Roese <sr@denx.de>
2603 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
2604 Author: Stefan Roese <sr@denx.de>
2605 Date: Sat Mar 31 08:46:08 2007 +0200
2607 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
2609 Fix a bug in the auto calibration routine. This driver now runs
2610 more reliable with the tested modules. It's also tested with
2611 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
2613 Signed-off-by: Stefan Roese <sr@denx.de>
2615 commit 342cd097be1e7affe82f42ab3da220959a699e64
2616 Author: Michal Simek <monstr@monstr.eu>
2617 Date: Fri Mar 30 22:52:09 2007 +0200
2619 [PATCH] Clean include dependence
2621 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
2622 Author: Michal Simek <monstr@monstr.eu>
2623 Date: Fri Mar 30 22:42:45 2007 +0200
2625 [CLEAN] Remove inefficient Suzaku code
2627 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
2628 Author: Stefan Roese <sr@denx.de>
2629 Date: Wed Mar 28 15:03:16 2007 +0200
2631 Merge some AMCC make targets to keep the top-level Makefile smaller
2633 Signed-off-by: Stefan Roese <sr@denx.de>
2635 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
2636 Author: Stefan Roese <sr@denx.de>
2637 Date: Wed Mar 28 14:52:12 2007 +0200
2639 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
2641 The "old" i2c commands (iprobe, imd...) are now compiled in again,
2642 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
2645 Signed-off-by: Stefan Roese <sr@denx.de>
2647 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
2648 Author: Michal Simek <monstr@monstr.eu>
2649 Date: Tue Mar 27 00:32:16 2007 +0200
2651 PATCH: Resolve GPL license problem
2653 commit 1798049522f594013aea29457d46794298c6ae15
2654 Author: Michal Simek <root@monstr.eu>
2655 Date: Mon Mar 26 01:39:07 2007 +0200
2657 Support for XUPV2P board
2659 BSP autoconfig support
2661 commit 0d974d5297349504a2ddfa09314be573b5df320a
2662 Author: Stefan Roese <sr@denx.de>
2663 Date: Sat Mar 24 15:57:09 2007 +0100
2665 [PATCH] Add 4xx GPIO functions
2667 This patch adds some 4xx GPIO functions. It also moves some of the
2668 common code and defines into a common 4xx GPIO header file.
2670 Signed-off-by: Stefan Roese <sr@denx.de>
2672 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
2673 Author: Stefan Roese <sr@denx.de>
2674 Date: Sat Mar 24 15:55:58 2007 +0100
2676 [PATCH] Small Sequoia cleanup
2678 Signed-off-by: Stefan Roese <sr@denx.de>
2680 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
2681 Author: Stefan Roese <sr@denx.de>
2682 Date: Sat Mar 24 15:45:34 2007 +0100
2684 [PATCH] Clean up 40EZ/Acadia support
2686 This patch cleans up all the open issue of the preliminary
2689 Signed-off-by: Stefan Roese <sr@denx.de>
2691 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
2692 Author: Jon Loeliger <jdl@freescale.com>
2693 Date: Tue Dec 12 11:02:20 2006 -0600
2695 Fix 8641HPCN problem with ld version 2.16
2697 (Dot outside sections problem).
2699 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
2701 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2703 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
2704 Author: Haiying Wang <haiying.wang@freescale.com>
2705 Date: Thu Dec 7 10:35:55 2006 -0600
2707 Set Rev 2.x 86xx PIC in mixed mode.
2709 Prevent false interrupt from hanging Linux as MSR[EE] is set
2710 to enable interrupts by changing the PIC out of the default
2711 pass through mode into mixed mode.
2713 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2714 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2716 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
2717 Author: Jason Jin <jason.jin@freescale.com>
2718 Date: Thu Dec 7 10:32:35 2006 -0600
2720 Add flash cmd function to 8641HPCN ramboot
2722 Also fixes some commmand for 8641 HPCN ramboot case.
2724 Signed-off-by: Jason Jin <jason.jin@freescale.com>
2725 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2727 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
2728 Author: Ed Swarthout <ed.swarthout@freescale.com>
2729 Date: Thu Dec 7 10:34:14 2006 -0600
2731 Add support for 8641 Rev 2 silicon.
2733 Without this patch, I am unable to get to the prompt on rev 2 silicon.
2734 Only set ddrioovcr for rev1.
2736 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
2737 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2739 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
2740 Author: Wolfgang Denk <wd@denx.de>
2741 Date: Thu Mar 22 00:13:12 2007 +0100
2743 Code cleanup / re-insert previous Copyright entries.
2745 Signed-off-by: Wolfgang Denk <wd@denx.de>
2747 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
2748 Author: Wolfgang Denk <wd@denx.de>
2749 Date: Wed Mar 21 23:26:15 2007 +0100
2751 Code cleanup. Update CHANGELOG
2753 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
2754 Author: Stefan Roese <sr@denx.de>
2755 Date: Wed Mar 21 14:54:29 2007 +0100
2757 ppc4xx: Fix file mode of include/configs/acadia.h
2759 Signed-off-by: Stefan Roese <sr@denx.de>
2761 commit d5f4614c9350d9333e575100fb250aab774d0258
2762 Author: Markus Klotzbuecher <mk@denx.de>
2763 Date: Wed Mar 21 14:41:46 2007 +0100
2765 SPC1920: fix small clock routing bug
2767 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2769 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
2770 Author: Stefan Roese <sr@denx.de>
2771 Date: Wed Mar 21 13:39:57 2007 +0100
2773 [PATCH] Add AMCC Acadia (405EZ) eval board support
2775 This patch adds support for the new AMCC Acadia eval board.
2777 Please note that this Acadia/405EZ support is still in a beta stage.
2778 Still lot's of cleanup needed but we need a preliminary release now.
2780 Signed-off-by: Stefan Roese <sr@denx.de>
2782 commit e01bd218b00af73499331a1a701625a852cd286f
2783 Author: Stefan Roese <sr@denx.de>
2784 Date: Wed Mar 21 13:38:59 2007 +0100
2786 [PATCH] Add AMCC PPC405EZ support
2788 This patch adds support for the new AMCC 405EZ PPC. It is in
2789 preparation for the AMCC Acadia board support.
2791 Please note that this Acadia/405EZ support is still in a beta stage.
2792 Still lot's of cleanup needed but we need a preliminary release now.
2794 Signed-off-by: Stefan Roese <sr@denx.de>
2796 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
2797 Author: Heiko Schocher <hs@pollux.denx.de>
2798 Date: Wed Mar 21 08:45:17 2007 +0100
2800 [PATCH] TQM8272: dont change the bits given from the HRCW
2801 for the SIUMCR and BCR Register.
2802 Fix the calculation for the EEprom Size
2804 Signed-off-by: Heiko Schocher <hs@denx.de>
2806 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
2807 Author: Aubrey Li <aubrey.adi@gmail.com>
2808 Date: Tue Mar 20 18:16:24 2007 +0800
2810 [Blackfin][PATCH] Add BF561 EZKIT board support
2812 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
2813 Author: Aubrey Li <aubrey.adi@gmail.com>
2814 Date: Mon Mar 19 22:55:58 2007 +0800
2816 [Blackfin][PATCH] minor cleanup
2818 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
2819 Author: Wolfgang Denk <wd@denx.de>
2820 Date: Mon Mar 19 13:10:08 2007 +0100
2822 Remove obsoleted POST files.
2824 Signed-off-by: Wolfgang Denk <wd@denx.de>
2826 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
2827 Author: Aubrey Li <aubrey.adi@gmail.com>
2828 Date: Mon Mar 19 01:26:11 2007 +0800
2830 [PATCH] Add flash chip M29W320ET/B support
2832 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
2833 Author: Aubrey Li <aubrey.adi@gmail.com>
2834 Date: Mon Mar 19 01:24:52 2007 +0800
2836 [Blackfin][PATCH] Add BF537 stamp board support
2838 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
2839 Author: Stefan Roese <sr@denx.de>
2840 Date: Fri Mar 16 21:11:42 2007 +0100
2842 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
2844 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
2845 DDR memory are dynamically programmed matching the total size
2846 of the equipped memory (DIMM modules).
2848 Signed-off-by: Stefan Roese <sr@denx.de>
2850 commit 76d1466f918b881cda2d259254761e73885093c2
2851 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2852 Date: Tue Mar 13 13:38:05 2007 +0100
2854 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
2855 boards in terms of unification.
2857 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2859 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
2860 Author: Wolfgang Denk <wd@denx.de>
2861 Date: Tue Mar 13 16:05:55 2007 +0100
2863 Make SC3 board build with 'make O='; use 'addcons' consistently
2864 (SC3 and Jupiter used to use 'addcon' instead).
2866 Signed-off-by: Wolfgang Denk wd@denx.de
2868 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
2869 Author: Heiko Schocher <hs@pollux.denx.de>
2870 Date: Tue Mar 13 09:40:59 2007 +0100
2872 [PATCH] update board config for jupiter Board:
2874 CONFIG_CMDLINE_EDITING,
2875 CFG_ENV_ADDR_REDUND activated
2877 Signed-off-by: Heiko Schocher <hs@denx.de>
2879 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
2880 Author: Aubrey Li <aubrey.adi@gmail.com>
2881 Date: Mon Mar 12 12:11:55 2007 +0800
2883 [Blackfin][PATCH] minor cleanup
2885 commit bfa5754a58477ac917d21527cd0f079d87cf188e
2886 Author: Aubrey Li <aubrey.adi@gmail.com>
2887 Date: Mon Mar 12 01:42:06 2007 +0800
2889 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
2891 commit 8440bb14581a294375c34b91b42512f9753d1130
2892 Author: Aubrey Li <aubrey.adi@gmail.com>
2893 Date: Mon Mar 12 00:25:14 2007 +0800
2895 [Blackfin][PATCH] code cleanup
2897 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
2898 Author: Michal Simek <monstr@monstr.eu>
2899 Date: Sun Mar 11 13:48:24 2007 +0100
2901 [Microblaze][PATCH] part 2
2903 interrupt controller support
2907 board information support
2909 booting image support
2911 adding support for Xilinx ML401
2913 commit 76316a318de91f6184e7c22a10e02d275ade2441
2914 Author: Michal Simek <monstr@monstr.eu>
2915 Date: Sun Mar 11 13:42:58 2007 +0100
2919 interrupt controller support
2923 board information support
2925 booting image support
2927 adding support for Xilinx ML401
2929 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
2930 Author: Aubrey Li <aubrey.adi@gmail.com>
2931 Date: Sat Mar 10 23:49:29 2007 +0800
2933 [Blackfin][PATCH] code cleanup
2935 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
2936 Author: Aubrey.Li <aubrey.adi@gmail.com>
2937 Date: Fri Mar 9 13:40:56 2007 +0800
2939 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
2941 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
2942 Author: Aubrey.Li <aubrey.adi@gmail.com>
2943 Date: Fri Mar 9 13:38:44 2007 +0800
2945 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
2947 commit 992423ab43c2bcf6b704853bd00af77450915e20
2948 Author: Stefan Roese <sr@denx.de>
2949 Date: Thu Mar 8 23:00:08 2007 +0100
2951 ppc4xx: Fix file mode of sequoia.c
2953 Signed-off-by: Stefan Roese <sr@denx.de>
2955 commit eb92f613556800f7483666db09d9a237ad911d4a
2956 Author: Wolfgang Denk <wd@pollux.denx.de>
2957 Date: Thu Mar 8 22:52:51 2007 +0100
2961 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
2962 Author: John Otken john@softadvances.com <john@softadvances.com>
2963 Date: Thu Mar 8 09:39:48 2007 -0600
2965 ppc4xx: Clear Sequoia/Rainier security engine reset bits
2967 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
2969 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
2970 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2971 Date: Thu Mar 8 16:26:52 2007 +0100
2973 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
2975 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2977 commit d9fc703246840c4b268debf48c334ba55c597dc0
2978 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2979 Date: Thu Mar 8 16:25:47 2007 +0100
2981 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
2983 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2985 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
2986 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2987 Date: Thu Mar 8 16:23:11 2007 +0100
2989 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
2991 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2993 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
2994 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2995 Date: Thu Mar 8 16:20:32 2007 +0100
2997 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
2999 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3001 commit f9fc6a5852a6335840882fa2111925010eea1abe
3002 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3003 Date: Wed Mar 7 15:32:01 2007 +0100
3005 fixed ethernet phy configuration for plu405 board
3007 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3009 commit 769104c9356594deb2092e204a39c05b33202d6c
3010 Author: Wolfgang Denk <wd@pollux.denx.de>
3011 Date: Thu Mar 8 21:49:27 2007 +0100
3015 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
3016 Author: Stefan Roese <sr@denx.de>
3017 Date: Thu Mar 8 10:13:16 2007 +0100
3019 [PATCH] Update AMCC Luan 440SP eval board support
3021 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
3022 inititializition. This includes DDR auto calibration and support
3023 for different DIMM modules, instead of the fixed setup used in
3024 the earlier version.
3026 This patch also enables the cache in FLASH for the startup
3027 phase of U-Boot (while running from FLASH). After relocating to
3028 SDRAM the cache is disabled again. This will speed up the boot
3029 process, especially the SDRAM setup, since there are some loops
3030 for memory testing (auto calibration).
3032 Signed-off-by: Stefan Roese <sr@denx.de>
3034 commit 2f5df47351910a2936c7741cf111855829200943
3035 Author: Stefan Roese <sr@denx.de>
3036 Date: Thu Mar 8 10:10:18 2007 +0100
3038 [PATCH] Update AMCC Yucca 440SPe eval board support
3040 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
3041 inititializition. This includes DDR auto calibration and support
3042 for different DIMM modules, instead of the fixed setup used in
3043 the earlier version.
3045 Signed-off-by: Stefan Roese <sr@denx.de>
3047 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
3048 Author: Stefan Roese <sr@denx.de>
3049 Date: Thu Mar 8 10:07:18 2007 +0100
3051 ppc4xx: Small AMCC Katmai 440SPe update
3053 Signed-off-by: Stefan Roese <sr@denx.de>
3055 commit df294497479b1dca6dd86318b2a912f72fede0df
3056 Author: Stefan Roese <sr@denx.de>
3057 Date: Thu Mar 8 10:06:09 2007 +0100
3059 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
3061 Signed-off-by: Stefan Roese <sr@denx.de>
3063 commit 83853178bd36bca6f0f8f1331476620c84a587fc
3064 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3065 Date: Wed Mar 7 12:14:50 2007 -0600
3067 net - Support ping reply when processing net-loop
3069 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
3071 This permits the ping command to test the phy interface when the phy
3072 is put in loopback mode (typically by setting register 0 bit 14).
3074 It also allows the port to respond to an external ping when u-boot is
3075 processing some other net command (such as tftp). This is useful when
3076 tftp appears to hang.
3078 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3079 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3081 commit fa1aef15bcd47736687be1af544506e90fba545d
3082 Author: Stefan Roese <sr@denx.de>
3083 Date: Wed Mar 7 16:43:00 2007 +0100
3085 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
3087 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
3088 DDR memory are dynamically programmed matching the total size
3089 of the equipped memory (DIMM modules).
3091 Signed-off-by: Stefan Roese <sr@denx.de>
3093 commit e2ebe696818939e2b974628be9c921ea3fe9de13
3094 Author: Stefan Roese <sr@denx.de>
3095 Date: Wed Mar 7 16:39:36 2007 +0100
3097 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
3099 This patch fixes a problem that occurs when 2 DIMM's are
3100 used. This problem was first spotted and fixed by Gerald Jackson
3101 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
3102 problem in a little more clever way.
3104 This patch also adds the nice functionality to dynamically
3105 create the TLB entries for the SDRAM (tlb.c). So we should
3106 never run into such problems with wrong (too short) TLB
3107 initialization again on these platforms.
3109 As this feature is new to the "old" 44x SPD DDR driver, it
3110 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
3112 Signed-off-by: Stefan Roese <sr@denx.de>
3114 commit 39218433983417b9df087976a79e3f80dd5e83d6
3115 Author: Wolfgang Denk <wd@denx.de>
3116 Date: Wed Mar 7 16:33:44 2007 +0100
3118 UC101: fix compiler warnings
3120 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
3121 Author: Wolfgang Denk <wd@pollux.denx.de>
3122 Date: Wed Mar 7 16:19:46 2007 +0100
3124 HMI1001: fix build error, cleanup compiler warnings.
3126 commit ad5bb451ade552c44bef9119d907929ebc2c126f
3127 Author: Wolfgang Denk <wd@pollux.denx.de>
3128 Date: Tue Mar 6 18:08:43 2007 +0100
3130 Restructure POST directory to support of other CPUs, boards, etc.
3132 commit a5284efd125967675b2e9c6ef7b95832268ad360
3133 Author: Wolfgang Denk <wd@pollux.denx.de>
3134 Date: Tue Mar 6 18:01:47 2007 +0100
3136 Fix HOSTARCH handling.
3137 Patch by Mike Frysinger, Mar 05 2007
3139 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
3140 Author: Stefan Roese <sr@denx.de>
3141 Date: Tue Mar 6 07:47:04 2007 +0100
3143 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
3145 As provided by the AMCC applications team, this patch optimizes the
3146 DDR2 setup for 166MHz bus speed. The values provided are also save
3147 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
3148 setup has to be adjusted as done in this patch.
3150 For this the NAND booting version had to include the "speed.c" file
3151 from the cpu/ppc4xx directory. With this addition the NAND SPL image
3152 will just fit into the 4kbytes of program space. gcc version 4.x as
3153 provided with ELDK 4.x is needed to generate this optimized code.
3155 Signed-off-by: Stefan Roese <sr@denx.de>
3157 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
3158 Author: Wolfgang Denk <wd@pollux.denx.de>
3159 Date: Sun Mar 4 01:36:05 2007 +0100
3163 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
3164 Author: Kim Phillips <kim.phillips@freescale.com>
3165 Date: Wed Feb 28 00:02:04 2007 -0600
3167 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
3169 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
3171 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
3172 Author: Kumar Gala <galak@kernel.crashing.org>
3173 Date: Tue Feb 27 23:51:42 2007 -0600
3175 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
3177 The config value for:
3185 Were not being used when setting the appropriate register
3193 To allow full config of the SCCR.
3195 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
3196 that were just bogus.
3198 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3200 commit d51b3cf371cd441030460ef19d36b2924c361b1a
3201 Author: Kim Phillips <kim.phillips@freescale.com>
3202 Date: Thu Feb 22 20:06:57 2007 -0600
3204 mpc83xx: update [local-]mac-address properties on UEC based devices
3206 8360 and 832x weren't updating their [local-]mac-address
3207 properties. This patch fixes that.
3209 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3211 commit 61f4f912acbe60776c5e00df1ec94094ce672957
3212 Author: Timur Tabi <timur@freescale.com>
3213 Date: Tue Feb 13 10:41:42 2007 -0600
3215 mpc83xx: write MAC address to mac-address and local-mac-address
3217 Some device trees have a mac-address property, some have local-mac-address,
3218 and some have both. To support all of these device trees, this patch
3219 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
3220 This function already updates local-mac-address.
3222 Signed-off-by: Timur Tabi <timur@freescale.com>
3224 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
3225 Author: Kim Phillips <kim.phillips@freescale.com>
3226 Date: Tue Feb 27 18:41:08 2007 -0600
3228 mpc83xx: add command line editing by default
3230 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
3231 Author: Kim Phillips <kim.phillips@freescale.com>
3232 Date: Wed Feb 14 19:50:53 2007 -0600
3234 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
3236 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
3237 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
3239 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
3241 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3242 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
3244 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
3245 Author: Xie Xiaobo <r63061@freescale.com>
3246 Date: Wed Feb 14 18:27:17 2007 +0800
3248 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
3250 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
3251 it pass DDR/DDR2 compliance tests.
3253 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
3255 commit b110f40bd180c6b560276589beedf753e97c46ce
3256 Author: Xie Xiaobo <r63061@freescale.com>
3257 Date: Wed Feb 14 18:27:06 2007 +0800
3259 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
3261 MPC8360E rev2.0 have new spridr,and PVR value,
3262 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
3264 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
3266 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
3267 Author: Xie Xiaobo <r63061@freescale.com>
3268 Date: Wed Feb 14 18:26:44 2007 +0800
3270 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
3272 MPC8349E rev3.1 have new spridr,and PVR value,
3273 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
3275 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
3277 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
3278 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
3279 Date: Wed Jan 31 11:04:19 2007 +0100
3281 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
3283 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
3284 which is used to se if an slave will ACK after receiving its address.
3286 Correct i2c probing to use this method as the old method could upset
3287 a slave as it wrote a data byte to it.
3289 Add a small delay in i2c_init() to let the controller
3290 shutdown any ongoing I2C activity.
3292 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
3294 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
3295 Author: Timur Tabi <timur@freescale.com>
3296 Date: Wed Jan 31 15:54:29 2007 -0600
3298 mpc83xx: Add support for the MPC8349E-mITX-GP
3300 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
3301 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
3302 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
3304 Signed-off-by: Timur Tabi <timur@freescale.com>
3306 commit fab16807adad350f618024350c6950165c247c72
3307 Author: Timur Tabi <timur@freescale.com>
3308 Date: Wed Jan 31 15:54:20 2007 -0600
3310 mpc83xx: Delete sdram_init() for MPC8349E-mITX
3312 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
3313 never does anything. This patch deletes it.
3315 Signed-off-by: Timur Tabi <timur@freescale.com>
3317 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
3318 Author: Dave Liu <daveliu@freescale.com>
3319 Date: Fri Jan 19 10:43:26 2007 +0800
3321 mpc83xx: Fix the LAW1/3 bug
3323 The patch solves the alignment problem of the local bus access windows to
3324 render accessible the memory bank and PHY registers of UPC 1 (starting at
3325 0xf801 0000). What we actually did was to adjust the sizes of the bus
3326 access windows so that the base address alignment requirement would be met.
3328 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
3329 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
3330 Signed-off-by: Dave Liu <daveliu@freescale.com>
3332 commit 97c4b397dce236a7318b304667bf89e59d08b17c
3333 Author: Kim Phillips <kim.phillips@freescale.com>
3334 Date: Tue Jan 30 16:15:31 2007 -0600
3336 mpc83xx: don't hang if watchdog configured on 8360, 832x
3338 don't hang if watchdog configured on 8360, 832x
3340 The watchdog programming model is the same across all 83xx devices;
3341 make the code reflect that.
3343 commit b70047478570e371ce7223be342ce98afea0f7d6
3344 Author: Kim Phillips <kim.phillips@freescale.com>
3345 Date: Tue Jan 30 16:15:21 2007 -0600
3347 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
3349 protect memcpy to bad address if a local-mac-address is missing from dt
3351 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
3352 Author: Kim Phillips <kim.phillips@freescale.com>
3353 Date: Tue Jan 30 16:15:04 2007 -0600
3355 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
3357 make 8360 default environment fdt be 8360 (not 8349)
3359 commit a28899c910024a0226331df07207b1038c300c93
3360 Author: Emilian Medve <Emilian.Medve@freescale.com>
3361 Date: Tue Jan 30 16:14:50 2007 -0600
3363 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
3365 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
3366 be used for busy-waiting since it strips the 'volatile' property from
3367 the bd variable. gcc3 was working by pure luck.
3369 This is a follow on patch to "Fix the UEC driver bug of QE"
3371 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
3372 Author: Kumar Gala <galak@kernel.crashing.org>
3373 Date: Tue Jan 30 14:08:30 2007 -0600
3375 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
3377 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
3378 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
3379 CONFIG_MPC834X so they are more generic.
3381 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3383 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
3384 Author: Kim Phillips <kim.phillips@freescale.com>
3385 Date: Thu Jan 25 13:40:55 2007 -0600
3387 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
3389 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
3390 Author: Kim Phillips <kim.phillips@freescale.com>
3391 Date: Wed Jan 24 17:18:37 2007 -0600
3393 mpc83xx: sort Makefile targets
3395 reordered targets alphabetically
3397 commit 91e25769771c1164ed63ffca0add49f934ae3343
3398 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
3399 Date: Tue Jan 16 11:38:14 2007 -0500
3401 mpc83xx: U-Boot support for Wind River SBC8349
3403 I've redone the SBC8349 support to match git-current, which
3404 incorporates all the MPC834x updates from Freescale since the 1.1.6
3405 release, including the DDR changes.
3407 I've kept all the SBC8349 files as parallel as possible to the
3408 MPC8349EMDS ones for ease of maintenance and to allow for easy
3409 inspection of what was changed to support this board. Hence the SBC8349
3410 U-Boot has FDT support and everything else that the MPC8349EMDS has.
3412 Fortunately the Freescale updates added support for boards using CS0,
3413 but I had to change spd_sdram.c to allow for board specific settings for
3414 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
3415 default if the board doesn't specify a value.)
3417 Hopefully this should be mergeable as-is and require no whitespace
3418 cleanups or similar, but if something doesn't measure up then let me
3419 know and I'll fix it.
3424 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
3425 Author: Sam Song <samsongshu@yahoo.com.cn>
3426 Date: Thu Dec 14 19:03:21 2006 +0800
3428 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
3430 A redundant semicolon existed in mpc8349itx.c
3433 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
3435 commit f35f358241c549be3f75cfe2eaa642914275b7ba
3436 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
3437 Date: Wed Dec 6 21:23:55 2006 -0500
3439 mpc83xx: Put the version (and magic) after the HRCW.
3441 Put the version (and magic) after the HRCW. This puts it in a fixed
3442 location in flash, not at the start of flash but as close as we can get.
3444 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
3446 commit 48aecd969171a6e99a55fae04933857787f9a5bd
3447 Author: Dave Liu <r63238@freescale.com>
3448 Date: Thu Dec 7 21:14:51 2006 +0800
3450 mpc83xx: Add the MPC832XEMDS board readme
3452 Add the MPC832XEMDS board readme
3454 Signed-off-by: Dave Liu <daveliu@freescale.com>
3456 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
3457 Author: Dave Liu <r63238@freescale.com>
3458 Date: Thu Dec 7 21:13:15 2006 +0800
3460 mpc83xx: Add support for the MPC832XEMDS board
3462 This patch supports DUART, ETH3/4 and PCI etc.
3464 Signed-off-by: Dave Liu <daveliu@freescale.com>
3466 commit e080313c32322e15ab5a18eb896a252858c57284
3467 Author: Dave Liu <r63238@freescale.com>
3468 Date: Thu Dec 7 21:11:58 2006 +0800
3470 mpc83xx: streamline the 83xx immr head file
3472 For better format and style, I streamlined the 83xx head files,
3473 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
3474 duplicated macro definition appear in the both files; 2) the structure
3475 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
3476 macro definition put inside the each structure. So, I cleaned up the
3477 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
3478 moved the macro definition to mpc83xx.h, Just like MPC8260.
3482 *streamline the 83xx immr head file
3484 Signed-off-by: Dave Liu <daveliu@freescale.com>
3486 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
3487 Author: Dave Liu <r63238@freescale.com>
3488 Date: Wed Dec 6 11:38:17 2006 +0800
3490 mpc83xx: Fix the UEC driver bug of QE
3492 The patch prevents the GCC tool chain from striping useful code for
3493 optimization. It will make UEC ethernet driver workable, Otherwise the
3494 UEC will fail in tx when you are using gcc4.x. but the driver can work
3495 when using gcc3.4.3.
3499 *Prevent the GCC from striping code for optimization, Otherwise the UEC
3500 will tx failed when you are using gcc4.x.
3502 Signed-off-by: Dave Liu <daveliu@freescale.com>
3504 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
3505 Author: Stefan Roese <sr@denx.de>
3506 Date: Thu Mar 1 21:11:36 2007 +0100
3508 [PATCH] Update AMCC Katmai 440SPe eval board support
3510 This patch updates the recently added Katmai board support. The biggest
3511 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
3514 Please note, that still some problems are left with some memory
3515 configurations. See the driver for more details.
3517 Signed-off-by: Stefan Roese <sr@denx.de>
3519 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
3520 Author: Stefan Roese <sr@denx.de>
3521 Date: Thu Mar 1 07:03:25 2007 +0100
3523 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
3525 Signed-off-by: Stefan Roese <sr@denx.de>
3527 commit ccbc7036648e465697ca298ba51e0e76dda352a0
3528 Author: Wolfgang Denk <wd@pollux.denx.de>
3529 Date: Wed Feb 28 01:28:53 2007 +0100
3531 SC3: fix typo in default environment
3533 commit e344568b1b46af85ec32d815586f91bc115d6223
3534 Author: Sergei Poselenov <sposelenov@emcraft.com>
3535 Date: Tue Feb 27 20:15:30 2007 +0300
3537 MCC200: Fixes for update procedure
3539 - fix logic error in image type handling
3540 - make sure file system images (cramfs etc.) get stored in flash
3541 with image header stripped so they can be mounted through MTD
3543 commit 743571145b37182757d4e688a77860b36ee77573
3544 Author: Wolfgang Denk <wd@pollux.denx.de>
3545 Date: Tue Feb 27 14:26:04 2007 +0100
3549 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
3550 Author: Sergei Poselenov <sposelenov@emcraft.com>
3551 Date: Tue Feb 27 12:40:16 2007 +0300
3553 MCC200 update - add LCD Progress Indicator
3555 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
3556 Author: Stefan Roese <sr@denx.de>
3557 Date: Thu Feb 22 07:43:34 2007 +0100
3559 [PATCH] get_dev() now unconditionally uses manual relocation
3561 Since the relocation fix is not included yet and we're not sure how
3562 it will be added, this patch removes code that required relocation
3563 to be fixed for now.
3565 Signed-off-by: Stefan Roese <sr@denx.de>
3567 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
3568 Author: Stefan Roese <sr@denx.de>
3569 Date: Thu Feb 22 07:40:23 2007 +0100
3571 [PATCH] Change systemace driver to select 8 & 16bit mode
3573 As suggested by Grant Likely this patch enables the Xilinx SystemACE
3574 driver to select 8 or 16bit mode upon startup.
3576 Signed-off-by: Stefan Roese <sr@denx.de>
3578 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
3579 Author: Haiying Wang <Haiying.Wang@freescale.com>
3580 Date: Wed Feb 21 16:52:31 2007 +0100
3582 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
3584 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
3585 is fully finished. The sync() is defined in each CPU's io.h file. For
3586 those CPUs which do not need sync for now, a dummy sync() is defined in
3589 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3591 commit da04995c7dc6772013a9a0dc5c767f190c402478
3592 Author: Stefan Roese <sr@denx.de>
3593 Date: Wed Feb 21 13:44:34 2007 +0100
3595 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
3597 Signed-off-by: Stefan Roese <sr@denx.de>
3599 commit 751bb57107d78978ae08e697c3deba816f5be091
3600 Author: Stefan Roese <sr@denx.de>
3601 Date: Tue Feb 20 13:21:57 2007 +0100
3603 [PATCH] Fix relocation problem with "new" get_dev() function
3605 This patch enables the "new" get_dev() function for block devices
3606 introduced by Grant Likely to be used on systems that still suffer
3607 from the relocation problems (manual relocation neede because of
3608 problems with linker script).
3610 Hopefully we can resolve this relocation issue soon for all platform
3611 so we don't need this additional code anymore.
3613 Signed-off-by: Stefan Roese <sr@denx.de>
3615 commit d93e2212f962668b3dce091ff5edc33f2347fe37
3616 Author: Stefan Roese <sr@denx.de>
3617 Date: Tue Feb 20 13:17:42 2007 +0100
3619 [PATCH] Update SystemACE driver for 16bit access
3621 This patch removes some problems when the Xilinx SystemACE driver
3622 is used with 16bit access on an big endian platform (like the
3625 Signed-off-by: Stefan Roese <sr@denx.de>
3627 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
3628 Author: Stefan Roese <sr@denx.de>
3629 Date: Tue Feb 20 13:15:40 2007 +0100
3631 [PATCH] Clean up Katmai (440SPe) linker script
3633 Signed-off-by: Stefan Roese <sr@denx.de>
3635 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
3636 Author: Stefan Roese <sr@denx.de>
3637 Date: Tue Feb 20 10:57:08 2007 +0100
3639 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
3641 Signed-off-by: Stefan Roese <sr@denx.de>
3643 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
3644 Author: Stefan Roese <sr@denx.de>
3645 Date: Tue Feb 20 10:51:26 2007 +0100
3647 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
3649 This patch switches to the desired I2C bus when the date/dtt
3650 commands are called. This can be configured using the
3651 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
3653 Signed-off-by: Stefan Roese <sr@denx.de>
3655 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
3656 Author: Stefan Roese <sr@denx.de>
3657 Date: Tue Feb 20 10:43:34 2007 +0100
3659 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
3661 This patch adds support for the DDR2 controller used on the
3662 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
3663 board and works fine with the following DIMM modules:
3665 - Corsair CM2X512-5400C4 (512MByte per DIMM)
3666 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
3667 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
3669 This patch also adds the nice functionality to dynamically
3670 create the TLB entries for the SDRAM (tlb.c). So we should
3671 never run into such problems with wrong (too short) TLB
3672 initialization again on these platforms.
3674 Signed-off-by: Stefan Roese <sr@denx.de>
3676 commit 36d830c9830379045f5daa9f542ac1c990c70068
3677 Author: Stefan Roese <sr@denx.de>
3678 Date: Tue Feb 20 10:35:42 2007 +0100
3680 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
3682 Since the existing 4xx SPD SDRAM initialization routines for the
3683 405 SDRAM controller and the 440 DDR controller don't have much in
3684 common this patch splits both drivers into different files.
3686 This is in preparation for the 440 DDR2 controller support (440SP/e).
3688 Signed-off-by: Stefan Roese <sr@denx.de>
3690 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
3691 Author: Stefan Roese <sr@denx.de>
3692 Date: Tue Feb 20 10:27:08 2007 +0100
3694 [PATCH] PPC4xx: Add support for multiple I2C busses
3696 This patch adds support for multiple I2C busses on the PPC4xx
3697 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
3698 to make use of this feature.
3700 It also merges the 405 and 440 i2c header files into one common
3703 Also the 4xx i2c reset procedure is reworked since I experienced
3704 some problems with the first access on the 440SPe Katmai board.
3706 Signed-off-by: Stefan Roese <sr@denx.de>
3708 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
3709 Author: Grant Likely <grant.likely@secretlab.ca>
3710 Date: Tue Feb 20 09:05:45 2007 +0100
3712 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
3714 Block device read/write is anonymous data; there is no need to use a
3715 typed pointer. void * is fine. Also add a hook for block_read functions
3717 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3719 commit 53758fa20e935cc87eeb0519ed365df753a6f289
3720 Author: Grant Likely <grant.likely@secretlab.ca>
3721 Date: Tue Feb 20 09:05:38 2007 +0100
3723 [PATCH 8_9] Add block_write hook to block_dev_desc_t
3725 Preparation for future patches which support block device writing
3727 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3729 commit f4852ebe6ca946a509667eb68be42026f837be76
3730 Author: Grant Likely <grant.likely@secretlab.ca>
3731 Date: Tue Feb 20 09:05:31 2007 +0100
3733 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
3735 Register read/write does not need to be wrapped in a full function. The
3736 patch replaces them with macros.
3738 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3740 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
3741 Author: Grant Likely <grant.likely@secretlab.ca>
3742 Date: Tue Feb 20 09:05:23 2007 +0100
3744 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
3746 The code in this file is not a command; it is a device driver. Put it in
3747 the correct place. There are zero functional changes in this patch, it
3748 only moves the file.
3750 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3752 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
3753 Author: Grant Likely <grant.likely@secretlab.ca>
3754 Date: Tue Feb 20 09:05:16 2007 +0100
3756 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
3758 This patch is in preparation of additional changes to the sysace driver.
3759 May as well take this opportunity to fixup the inconsistent whitespace since
3760 this file is about to undergo major changes anyway.
3762 There are zero functional changes in this patch. It only cleans up the
3765 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3767 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
3768 Author: Grant Likely <grant.likely@secretlab.ca>
3769 Date: Tue Feb 20 09:05:07 2007 +0100
3771 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
3773 isprint is already defined in ctype.c
3775 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3777 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
3778 Author: Grant Likely <grant.likely@secretlab.ca>
3779 Date: Tue Feb 20 09:05:00 2007 +0100
3781 [PATCH 3_9] Move buffer print code from md command to common function
3783 Printing a buffer is a darn useful thing. Move the buffer print code
3784 into print_buffer() in lib_generic/
3786 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3788 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
3789 Author: Grant Likely <grant.likely@secretlab.ca>
3790 Date: Tue Feb 20 09:04:52 2007 +0100
3792 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
3794 Change the xilinx device drivers and board code to include config.h
3795 instead of xparameters.h directly. config.h always includes the
3796 correct xparameters file. This change reduces the posibility of
3797 including the wrong file when adding a new xilinx board port
3799 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3801 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
3802 Author: Grant Likely <grant.likely@secretlab.ca>
3803 Date: Tue Feb 20 09:04:34 2007 +0100
3805 [PATCH 1_4] Merge common get_dev() routines for block devices
3807 Each of the filesystem drivers duplicate the get_dev routine. This change
3808 merges them into a single function in part.c
3810 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3812 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
3813 Author: Wolfgang Denk <wd@pollux.denx.de>
3814 Date: Mon Feb 19 23:09:51 2007 +0100
3816 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
3817 as root file system images.
3819 commit 489c696ae7211218961d159e43e722d74c36fcbc
3820 Author: Sergei Poselenov <sposelenov@emcraft.com>
3821 Date: Wed Feb 14 14:30:28 2007 +0300
3823 MCC200: Extensions to Software Update Mechanism
3825 Update / extend Software Update Mechanism for MCC200 board:
3827 - Add support for rootfs image added. The environment variables
3828 "rootfs_st" and "rootfs_nd" can be used to override the default
3829 values of the image start and end.
3830 - Remove excessive key check code.
3833 commit 4be23a12f23f1372634edc3215137b09768b7949
3834 Author: Stefan Roese <sr@denx.de>
3835 Date: Mon Feb 19 08:23:15 2007 +0100
3837 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
3839 As spotted by Matthias Fuchs, the READY input should not be
3840 enabled for the NOR FLASH on the Sequoia board.
3842 Signed-off-by: Stefan Roese <sr@denx.de>
3844 commit 2605e90bf676d48123afe5719a846d2b52b24aac
3845 Author: Heiko Schocher <hs@pollux.denx.de>
3846 Date: Fri Feb 16 07:57:42 2007 +0100
3848 [PATCH] Added support for the jupiter board.
3850 Signed-off-by: Heiko Schocher <hs@denx.de>
3852 commit 497d012e5be0194e1084073d0081eb1a844796b2
3853 Author: Gary Jennejohn <garyj@pollux.denx.de>
3854 Date: Mon Feb 12 13:11:50 2007 +0100
3856 LPC2292: patch from Siemens.
3858 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
3859 Author: Stefan Roese <sr@denx.de>
3860 Date: Sat Feb 10 08:49:31 2007 +0100
3862 [PATCH] Add missing p3mx.h file to repository (ups)
3864 Signed-off-by: Stefan Roese <sr@denx.de>
3866 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
3867 Author: Bartlomiej Sieka <tur@semihalf.com>
3868 Date: Fri Feb 9 10:45:42 2007 +0100
3870 [Motion-PRO] Preliminary support for the Motion-PRO board.
3872 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
3873 Author: Stefan Roese <sr@denx.de>
3874 Date: Wed Feb 7 16:51:08 2007 +0100
3876 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
3878 Some boards that can have more than 768MBytes of SDRAM need to
3879 set "initrd_high", so that the initrd can be accessed by the
3882 Signed-off-by: Stefan Roese <sr@denx.de>
3884 commit 7372ca68227930d03cffa548310524cad5b96733
3885 Author: Stefan Roese <sr@denx.de>
3886 Date: Fri Feb 2 12:44:22 2007 +0100
3888 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
3890 Previously the strapping DCR/SDR was read to determine if the internal PCI
3891 arbiter is enabled or not. This strapping bit can be overridden, so now
3892 the current status is read from the correct DCR/SDR register.
3894 Signed-off-by: Stefan Roese <sr@denx.de>
3896 commit 2aa54f651a42d198673318f07a20c89a43e4d197
3897 Author: Stefan Roese <sr@denx.de>
3898 Date: Fri Feb 2 12:42:08 2007 +0100
3900 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
3902 Signed-off-by: Stefan Roese <sr@denx.de>
3904 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
3905 Author: Stefan Roese <sr@denx.de>
3906 Date: Thu Feb 1 13:22:41 2007 +0100
3908 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
3910 When PCI PNP is enabled the pci pnp configuration routine is called
3911 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
3912 problems with some PCI cards. For now disable the PCI PNP configuration.
3914 Signed-off-by: Stefan Roese <sr@denx.de>
3916 commit 2902fadade3be7659467e8d074048c6b7068f5c0
3917 Author: Stefan Roese <sr@denx.de>
3918 Date: Wed Jan 31 16:56:10 2007 +0100
3920 [PATCH] Update 440EPx/440GRx cpu detection
3922 Signed-off-by: Stefan Roese <sr@denx.de>
3924 commit d5ea287b02a6945c3977410e364a879dd1a555c8
3925 Author: Stefan Roese <sr@denx.de>
3926 Date: Wed Jan 31 16:38:04 2007 +0100
3928 [PATCH] Update esd cpci5200 files
3930 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
3932 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
3933 Author: Stefan Roese <sr@denx.de>
3934 Date: Wed Jan 31 16:37:34 2007 +0100
3936 [PATCH] Add support for esd mecp5200 board
3938 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
3940 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
3941 Author: Stefan Roese <sr@denx.de>
3942 Date: Wed Jan 31 12:38:50 2007 +0100
3944 [PATCH] Remove unneccessary yellowstone board config file
3946 Signed-off-by: Stefan Roese <sr@denx.de>
3948 commit e802594b6fa1b166308820c276b96dc0d7cc731c
3949 Author: Stefan Roese <sr@denx.de>
3950 Date: Tue Jan 30 17:06:10 2007 +0100
3952 [PATCH] Update Sequoia (440EPx) config file
3954 The config file now handles the 2nd target, the Rainier (440GRx)
3955 evaluation board better. Additionally the PPC input clock was
3956 adjusted to match the correct value of 33.0 MHz.
3958 Signed-off-by: Stefan Roese <sr@denx.de>
3960 commit 700200c67e73b83751418abe7815840dca8fd6cb
3961 Author: Stefan Roese <sr@denx.de>
3962 Date: Tue Jan 30 17:04:19 2007 +0100
3964 [PATCH] Merge Yosemite & Yellowstone board ports
3966 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
3967 share one config file and all board specific files. This way we
3968 don't have to maintain two different sets of files for nearly
3971 Signed-off-by: Stefan Roese <sr@denx.de>
3973 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
3974 Author: Stefan Roese <sr@denx.de>
3975 Date: Tue Jan 30 15:01:49 2007 +0100
3977 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
3979 SCPU doesn't use redundant environment in flash.
3981 Signed-off-by: Stefan Roese <sr@denx.de>
3983 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
3984 Author: Stefan Roese <sr@denx.de>
3985 Date: Tue Jan 30 12:51:07 2007 +0100
3987 [PATCH] alpr: Update alpr board config file
3989 Signed-off-by: Stefan Roese <sr@denx.de>
3991 commit f8db84f132b1e335f20f96138a1f09ed97b08664
3992 Author: Wolfgang Denk <wd@pollux.denx.de>
3993 Date: Tue Jan 30 00:50:40 2007 +0100
3995 LPC2292 SODIMM port coding style cleanup.
3997 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
3998 Author: Gary Jennejohn <garyj@pollux.denx.de>
3999 Date: Wed Jan 24 12:16:56 2007 +0100
4001 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
4003 commit 2daf046ba627f85f44195815778140039636244e
4004 Author: Bartlomiej Sieka <tur@semihalf.com>
4005 Date: Tue Jan 23 17:22:06 2007 +0100
4007 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
4009 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
4010 Author: Bartlomiej Sieka <tur@semihalf.com>
4011 Date: Tue Jan 23 14:21:14 2007 +0100
4013 [iDMR] Flash driver on initialisation write-protects some sectors,
4014 currently sectors 0-3. Sector 3 does not need to be protected, though
4015 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
4016 fixes this, i.e., only sectors 0-2 are protected.
4018 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
4019 Author: Bartlomiej Sieka <tur@semihalf.com>
4020 Date: Tue Jan 23 14:11:22 2007 +0100
4022 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
4023 "mii device" results in "Unexpected exception"). Fixing this properly
4024 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
4025 this commit disables MII commads for now.
4027 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
4028 Author: Bartlomiej Sieka <tur@semihalf.com>
4029 Date: Tue Jan 23 13:25:22 2007 +0100
4031 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
4032 Identification Register (CIR).
4034 commit fdef388758506765d4d6a7155c8f1584c63ff581
4035 Author: roy zang <tie-fei.zang@freescale.com>
4036 Date: Mon Jan 22 13:19:21 2007 +0800
4038 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
4039 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
4040 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
4043 commit a4012396645533aef218354eeba754dff0deace8
4044 Author: Wolfgang Denk <wd@pollux.denx.de>
4045 Date: Fri Jan 19 23:08:39 2007 +0100
4049 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
4050 Author: Heiko Schocher <hs@pollux.denx.de>
4051 Date: Fri Jan 19 19:57:10 2007 +0100
4053 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
4055 Signed-off-by: Heiko Schocher <hs@denx.de>
4057 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
4058 Author: Heiko Schocher <hs@pollux.denx.de>
4059 Date: Fri Jan 19 18:05:26 2007 +0100
4061 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
4062 if you must swap the bytes between reading/writing.
4063 (Needed for the SC3 board)
4065 Signed-off-by: Heiko Schocher <hs@denx.de>
4067 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
4068 Author: Stefan Roese <sr@denx.de>
4069 Date: Thu Jan 18 16:05:47 2007 +0100
4071 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
4073 Signed-off-by: Stefan Roese <sr@denx.de>
4075 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
4076 Author: Stefan Roese <sr@denx.de>
4077 Date: Thu Jan 18 11:54:52 2007 +0100
4079 [PATCH] Update Prodrive P3Mx support
4081 Signed-off-by: Stefan Roese <sr@denx.de>
4083 commit 34167a36c29ee946b727465db5c014746a08e978
4084 Author: Stefan Roese <sr@denx.de>
4085 Date: Thu Jan 18 11:48:10 2007 +0100
4087 [PATCH] Add missing Taishan config file
4089 Signed-off-by: Stefan Roese <sr@denx.de>
4091 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
4092 Author: Heiko Schocher <hs@pollux.denx.de>
4093 Date: Thu Jan 18 11:28:51 2007 +0100
4095 [PATCH] Fix: Compilerwarnings for SC3 board.
4096 The EBC Configuration Register is now by CFG_EBC_CFG definable
4097 Added JFFS2 support for the SC3 board.
4099 Signed-off-by: Heiko Schocher <hs@denx.de>
4101 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
4102 Author: Stefan Roese <sr@denx.de>
4103 Date: Thu Jan 18 10:25:34 2007 +0100
4105 [PATCH] Add support for AMCC Taishan PPC440GX eval board
4107 Signed-off-by: Stefan Roese <sr@denx.de>
4109 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
4110 Author: Wolfgang Denk <wd@pollux.denx.de>
4111 Date: Tue Jan 16 18:30:50 2007 +0100
4113 Raname solidcard3 into sc3; add redundant env for sc3
4115 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
4116 Author: Wolfgang Denk <wd@pollux.denx.de>
4117 Date: Tue Jan 16 12:46:35 2007 +0100
4119 Update default environment for Solidcard3
4121 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
4122 Author: Stefan Roese <sr@denx.de>
4123 Date: Mon Jan 15 09:46:29 2007 +0100
4125 [PATCH] Fix 440SPe rev B detection from previous patch
4127 Signed-off-by: Stefan Roese <sr@denx.de>
4129 commit a443d31410c571ee8f970da819a44d698fdd6b1f
4130 Author: Heiko Schocher <hs@pollux.denx.de>
4131 Date: Sun Jan 14 13:35:31 2007 +0100
4133 [FIX] correct I2C Writes for the LM81 Sensor.
4135 Signed-off-by: Heiko Schocher <hs@denx.de>
4137 commit 0bba5452835f19a61204edcda3a58112fd8e2208
4138 Author: Wolfgang Denk <wd@pollux.denx.de>
4139 Date: Sat Jan 13 11:17:10 2007 +0100
4141 Undo commit 3033ebb2: reset command does not take any arguments
4143 Haiying Wang's modification to the reset command was broken, undo it.
4145 Signed-off-by: Wolfgang Denk <wd@denx.de>
4147 commit 95981778cff0038fd9941044d6a3eda810e33258
4148 Author: Stefan Roese <sr@denx.de>
4149 Date: Sat Jan 13 08:01:03 2007 +0100
4151 [PATCH] Update 440SP(e) cpu revisions
4153 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
4155 Signed-off-by: Stefan Roese <sr@denx.de>
4157 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
4158 Author: Stefan Roese <sr@denx.de>
4159 Date: Sat Jan 13 07:59:56 2007 +0100
4161 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
4163 Now the board revision and the current PCI bus speed are printed after
4166 Also the EBC initialising is now done via defines in the board config
4169 Signed-off-by: Stefan Roese <sr@denx.de>
4171 commit 36adff362c2c0141ff8a810d42a7e478f779130f
4172 Author: Stefan Roese <sr@denx.de>
4173 Date: Sat Jan 13 07:59:19 2007 +0100
4175 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
4177 Now the board revision and the current PCI bus speed are printed after
4180 Also the EBC initialising is now done via defines in the board config
4183 Signed-off-by: Stefan Roese <sr@denx.de>
4185 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
4186 Author: Stefan Roese <sr@denx.de>
4187 Date: Sat Jan 13 07:57:51 2007 +0100
4189 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
4191 Now the board revision and the current PCI bus speed are printed after
4194 Signed-off-by: Stefan Roese <sr@denx.de>
4196 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
4197 Author: Heiko Schocher <hs@pollux.denx.de>
4198 Date: Thu Jan 11 15:44:44 2007 +0100
4200 Added support for the SOLIDCARD III board from Eurodesign
4202 Signed-off-by: Heiko Schocher <hs@denx.de>
4204 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
4205 Author: Reinhard Thies <Reinhard.Thies@web.de>
4206 Date: Wed Jan 10 14:41:14 2007 +0100
4208 Adjusted default environment for cam5200 board.
4210 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
4211 Author: Wolfgang Denk <wd@pollux.denx.de>
4212 Date: Wed Jan 10 15:35:52 2007 +0100
4216 commit 787fa15860a57833e50bd30555079a9cd4e519b8
4217 Author: Wolfgang Denk <wd@pollux.denx.de>
4218 Date: Wed Jan 10 01:28:39 2007 +0100
4220 Fix auto_update for MCC200 board.
4222 The invocation of do_auto_update() is moved to the end of the
4223 misc_init_r() function, after the flash mappings have been
4224 initialized. Please find attached a patch that implements that
4227 Also correct the decoding of the keypad status. With this update, the
4228 key that will trigger the update is Column 2, Row 2.
4230 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
4231 Author: Marian Balakowicz <m8@semihalf.com>
4232 Date: Wed Jan 10 00:26:15 2007 +0100
4234 CAM5200 flash driver modifications:
4235 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
4236 - add second build target 'cam5200_niosflash' which still uses custom driver
4238 commit 67fea022fa957f59653b5238c7496f80a6b70432
4239 Author: Markus Klotzbuecher <mk@denx.de>
4240 Date: Tue Jan 9 16:02:48 2007 +0100
4242 SPC1920: cleanup memory contoller setup
4244 commit 8fc2102faa23593c80381437c09f7745a14deb40
4245 Author: Markus Klotzbuecher <mk@denx.de>
4246 Date: Tue Jan 9 14:57:14 2007 +0100
4248 Fix the cpu speed setup to work with all boards.
4250 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
4251 Author: Markus Klotzbuecher <mk@denx.de>
4252 Date: Tue Jan 9 14:57:13 2007 +0100
4254 SPC1920: add support for the FM18L08 Ramtron FRAM
4256 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
4257 Author: Markus Klotzbuecher <mk@denx.de>
4258 Date: Tue Jan 9 14:57:13 2007 +0100
4260 SPC1920: update the HPI register addresses to work with the second
4261 generation of hardware
4263 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
4264 Author: Markus Klotzbuecher <mk@creamnet.de>
4265 Date: Tue Jan 9 14:57:13 2007 +0100
4267 Miscellanious spc1920 related cleanups
4269 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
4270 Author: Markus Klotzbuecher <mk@denx.de>
4271 Date: Tue Jan 9 14:57:12 2007 +0100
4273 SPC1920 GO/NOGO led should be set to color red in U-Boot
4275 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
4276 Author: Markus Klotzbuecher <mk@creamnet.de>
4277 Date: Tue Jan 9 14:57:12 2007 +0100
4279 Add support for the DS3231 RTC
4281 commit 8139567b60d678584b05f0718a681f2047c5e14f
4282 Author: Markus Klotzbuecher <mk@creamnet.de>
4283 Date: Tue Jan 9 14:57:11 2007 +0100
4285 SMC1 uses external CLK4 instead of BRG on spc1920
4287 commit d8d9de1a02fbd880b613d607143d1f57342affc7
4288 Author: Markus Klotzbuecher <mk@creamnet.de>
4289 Date: Tue Jan 9 14:57:10 2007 +0100
4291 Update the SPC1920 CMB PLD driver
4293 commit 3f34f869162750e5e999fd140f884f5de952bcfe
4294 Author: Markus Klotzbuecher <mk@creamnet.de>
4295 Date: Tue Jan 9 14:57:10 2007 +0100
4297 Add / enable I2C support on the spc1920 board
4299 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
4300 Author: Markus Klotzbuecher <mk@creamnet.de>
4301 Date: Tue Jan 9 14:57:10 2007 +0100
4303 Add support for the tms320671x host port interface (HPI)
4305 commit f4eb54529bb3664c3a562e488b460fe075f79d67
4306 Author: Wolfgang Denk <wd@pollux.denx.de>
4307 Date: Sun Jan 7 00:13:11 2007 +0100
4309 Prepare for release 1.2.0
4311 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
4312 Author: Stefan Roese <sr@denx.de>
4313 Date: Sat Jan 6 15:58:09 2007 +0100
4315 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
4317 This patch fixes a problem with an incorrect setup for the refresh
4318 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
4320 Signed-off-by: Stefan Roese <sr@denx.de>
4322 commit f16c1da9577f06c5fc08651a4065537407de4635
4323 Author: Stefan Roese <sr@denx.de>
4324 Date: Sat Jan 6 15:56:13 2007 +0100
4326 [PATCH] Update ALPR board files
4328 This update brings the ALPR board support to the newest version.
4329 It also fixes a problem with the NAND driver.
4331 Signed-off-by: Stefan Roese <sr@denx.de>
4333 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
4334 Author: Stefan Roese <sr@denx.de>
4335 Date: Fri Jan 5 11:46:05 2007 +0100
4337 [PATCH] nand: Fix problem with oobsize calculation
4339 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
4341 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
4342 returns a 0x15. In the code fragment below bits [1:0] determine the
4343 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
4344 next field is also ANDed with 0x3. However this is a one bit field
4345 as defined in the Hynix and Samsung parts in the 4th ID byte that
4346 determins the oobsize, not a two bit field. It works on Samsung as
4347 bits[3:2] are 01. However for the Hynix there is a 11 in these two
4348 bits, so the oob size gets messed up.
4350 I checked the correct linux code and the suggested fix from Brian is
4351 also available in the linux nand mtd driver.
4353 Signed-off-by: Stefan Roese <sr@denx.de>
4355 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
4356 Author: Stefan Roese <sr@denx.de>
4357 Date: Fri Jan 5 10:40:36 2007 +0100
4359 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
4361 This fix will make the MAL burst disabling patch for the Linux
4362 EMAC driver obsolete.
4364 Signed-off-by: Stefan Roese <sr@denx.de>
4366 commit 023889838282b6237b401664f22dd22dfba2c066
4367 Author: Stefan Roese <sr@denx.de>
4368 Date: Fri Jan 5 10:38:05 2007 +0100
4370 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
4372 This code will optimize the DDR2 controller setup on a board specific
4375 Note: This code doesn't work right now on the NAND booting image for the
4376 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
4378 Signed-off-by: Stefan Roese <sr@denx.de>
4380 commit cce4acbb68398634b8d011ed7bb0d12269c84230
4381 Author: Bartlomiej Sieka <tur@semihalf.com>
4382 Date: Thu Dec 28 19:08:21 2006 +0100
4385 - fix a typo in V38B config file
4386 - move watchdog initialisation earlier in the boot process
4387 - add "wdt=off" to default kernel command line (disables kernel watchdog)
4389 commit 92eb729bad876725aeea908d2addba0800620840
4390 Author: Wolfgang Denk <wd@pollux.denx.de>
4391 Date: Wed Dec 27 01:26:13 2006 +0100
4393 Fix bug in adaption of Stefano Babic's CFI driver patch.
4395 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
4396 Author: Wolfgang Denk <wd@pollux.denx.de>
4397 Date: Sun Dec 24 01:42:57 2006 +0100
4401 commit d784fdb05900ada3686d5778783e1fb328e9fb66
4402 Author: Stefano Babic <sbabic@denx.de>
4403 Date: Tue Dec 12 00:22:42 2006 +0100
4405 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
4407 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
4408 Author: Stefan Roese <sr@denx.de>
4409 Date: Fri Dec 22 14:29:40 2006 +0100
4411 [PATCH] Fix sequoia flash autodetection (finally correct)
4413 Now 32MByte and 64MByte FLASH is know to work and other
4414 configurations should work too.
4416 Signed-off-by: Stefan Roese <sr@denx.de>
4418 commit 82e5236a8b719543643fd26d5827938ab2b94818
4419 Author: Wolfgang Denk <wd@pollux.denx.de>
4420 Date: Fri Dec 22 10:30:26 2006 +0100
4422 Minor code cleanup; update CHANGELOG.
4424 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
4425 Author: Heiko Schocher <hs@pollux.denx.de>
4426 Date: Thu Dec 21 17:17:02 2006 +0100
4428 Added support for the TQM8272 board from TQ
4430 Signed-off-by: Heiko Schocher <hs@denx.de>
4432 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
4433 Author: Heiko Schocher <hs@pollux.denx.de>
4434 Date: Thu Dec 21 16:14:48 2006 +0100
4436 [PATCH] Add support for the UC101 board from MAN.
4438 Signed-off-by: Heiko Schocher <hs@denx.de>
4440 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
4441 Author: Bartlomiej Sieka <tur@semihalf.com>
4442 Date: Wed Dec 20 00:29:43 2006 +0100
4444 Fix to make the baudrate changes immediate for the MCF52x2 family.
4446 commit daa6e418bcc0c717752e8de939c213c790286096
4447 Author: Bartlomiej Sieka <tur@semihalf.com>
4448 Date: Wed Dec 20 00:27:32 2006 +0100
4450 Preliminary support for the iDMR board (ColdFire).
4452 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
4453 Author: Andrei Safronov <safronov@pollux.denx.de>
4454 Date: Fri Dec 8 16:23:08 2006 +0100
4456 automatic update mechanism
4458 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
4459 Author: roy zang <tie-fei.zang@freescale.com>
4460 Date: Mon Dec 4 17:56:59 2006 +0800
4462 Slight code clean up.
4463 Add comments, delete duplicate define and remove spaces.
4464 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4466 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
4467 Author: roy zang <tie-fei.zang@freescale.com>
4468 Date: Mon Dec 4 17:54:21 2006 +0800
4470 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
4471 multiplier table can not refect the real PLL clock behavior of these
4472 processors. Please refer to the hardware specification for detailed
4473 information of the corresponding processors.
4474 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4476 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
4477 Author: roy zang <tie-fei.zang@freescale.com>
4478 Date: Mon Dec 4 14:46:23 2006 +0800
4480 Remove the static MAC address, ip address, server ip, netmask and
4481 gateway ip for network setting.
4482 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4484 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
4485 Author: roy zang <tie-fei.zang@freescale.com>
4486 Date: Mon Dec 4 14:33:08 2006 +0800
4488 Remove the duplicate memory test code for mpc744ihpc2 board.
4489 If a memory test is needed, please use the functions in
4490 post/memory.c or memtest command.
4491 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4493 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
4494 Author: roy zang <tie-fei.zang@freescale.com>
4495 Date: Fri Dec 1 19:01:25 2006 +0800
4497 Fix the exception occuring in RAM table search issue.
4498 The original search_one_table() function code can only processes the search
4499 for the exception occurring in FLASH/ROM, because the exception and fixup
4500 table usually locate in FLASH. If the exception address is also in
4501 FLASH, it will be OK.
4502 If the exception occurs in RAM, after the u-boot relocation, a
4503 relocation offset should be added.
4505 clean up the code in cpu/74xx_7xx/cpu.c
4507 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4509 commit ee311214e0d216f904feea269599d0934bf71f23
4510 Author: roy zang <tie-fei.zang@freescale.com>
4511 Date: Fri Dec 1 11:47:36 2006 +0800
4513 Clean up the code according to codestyle:
4514 (1) remove some C++ comments.
4515 (2) remove trailing white space.
4516 (3) remove trailing empty line.
4517 (4) Indentation by table.
4518 (5) remove {} in one line condition.
4519 (6) add space before '(' in function call.
4520 Remove some weird printf () output.
4521 Add necessary comments.
4522 Modified Makefile to support building in a separate directory.
4524 commit dd520bf314c7add4183c5191692180f576f96b60
4525 Author: Wolfgang Denk <wd@pollux.denx.de>
4526 Date: Thu Nov 30 18:02:20 2006 +0100
4530 commit 8d9a8610b8256331132227e9e6585c6bd5742787
4531 Author: Wolfgang Denk <wd@pollux.denx.de>
4532 Date: Thu Nov 30 01:54:07 2006 +0100
4534 Code cleanup. Update CHANGELOG.
4536 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
4537 Author: Grant Likely <grant.likely@secretlab.ca>
4538 Date: Wed Nov 29 16:23:42 2006 +0100
4540 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
4542 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
4543 not the XLB frequency.
4545 This patch depends on the previous patches for MPC52xx device tree support
4547 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4548 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
4550 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
4551 Author: Stefan Roese <sr@denx.de>
4552 Date: Wed Nov 29 15:42:37 2006 +0100
4554 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
4556 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
4557 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
4558 quite similar and share the same board directory "prodrive/p3mx"
4559 and the same config file "p3mx.h".
4561 Signed-off-by: Stefan Roese <sr@denx.de>
4563 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
4564 Author: Stefan Roese <sr@denx.de>
4565 Date: Wed Nov 29 12:53:15 2006 +0100
4567 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
4569 In the bootvx command the load address was only read from the env
4570 variable "loadaddr" and not optionally passed as paramter as described
4571 in the help. This is fixed with this patch. The behaviour is now the
4572 same as in the bootelf command.
4574 Signed-off-by: Stefan Roese <sr@denx.de>
4576 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
4577 Author: Stefan Roese <sr@denx.de>
4578 Date: Wed Nov 29 12:03:57 2006 +0100
4580 [PATCH] include/ppc440.h minor error affecting interrupts
4582 Fixed include/ppc440.c for UIC address Bug
4584 Corrects bug affecting the addresses for the universal interrupt
4585 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
4587 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
4588 Signed-off-by: Stefan Roese <sr@denx.de>
4590 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
4591 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4592 Date: Tue Nov 28 16:17:27 2006 -0600
4594 Make fsl-i2c not conflict with SOFT I2C
4596 Signed-off-by: Timur Tabi <timur@freescale.com>
4598 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
4599 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4600 Date: Tue Nov 28 16:17:18 2006 -0600
4602 Fix I2C master address initialization.
4604 Signed-off-by: Timur Tabi <timur@freescale.com>
4606 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
4607 Author: Kim Phillips <kim.phillips@freescale.com>
4608 Date: Tue Nov 28 23:31:19 2006 -0600
4610 Assign maintainers for mpc8349emds and mpc8360emds
4612 Dave for mpc8360emds, and me for mpc8349emds.
4614 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
4615 Author: Kim Phillips <kim.phillips@freescale.com>
4616 Date: Tue Nov 28 23:28:33 2006 -0600
4618 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
4620 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
4621 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
4623 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
4624 Author: Timur Tabi <timur@freescale.com>
4625 Date: Tue Nov 28 12:09:35 2006 -0600
4627 mpc83xx: Miscellaneous code style fixes
4629 Implement various code style fixes and similar changes.
4631 Signed-off-by: Timur Tabi <timur@freescale.com>
4633 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
4634 Author: Stefan Roese <sr@denx.de>
4635 Date: Tue Nov 28 17:55:49 2006 +0100
4637 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
4639 This patch adds the code and configuration necessary to boot with an
4640 arch/powerpc Linux kernel.
4642 Signed-off-by: Grant Likely <grant.likely@gmail.com>
4643 Acked-by: Jon Loeliger <jdl@freescale.com>
4645 commit e732faec95a83cb468b4850ae807c8301dde8f6a
4646 Author: Stefan Roese <sr@denx.de>
4647 Date: Tue Nov 28 16:09:24 2006 +0100
4649 [PATCH] PPC4xx: 440SP Rev. C detection added
4651 Signed-off-by: Stefan Roese <sr@denx.de>
4653 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
4654 Author: Stefan Roese <sr@denx.de>
4655 Date: Tue Nov 28 11:04:45 2006 +0100
4657 [PATCH] nand: Fix patch merge problem
4659 Signed-off-by: Stefan Roese <sr@denx.de>
4661 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
4662 Author: Stefan Roese <sr@denx.de>
4663 Date: Tue Nov 28 11:04:45 2006 +0100
4665 [PATCH] nand: Fix patch merge problem
4667 Signed-off-by: Stefan Roese <sr@denx.de>
4669 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
4670 Author: Wolfgang Denk <wd@pollux.denx.de>
4671 Date: Mon Nov 27 22:53:53 2006 +0100
4675 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
4676 Author: Stefan Roese <sr@denx.de>
4677 Date: Mon Nov 27 17:43:25 2006 +0100
4679 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
4681 Patch below corrects the setting of the zmiifer register, it was
4682 overwritting the register rather than ORing the settings.
4684 Signed-off-by: Neil Wilson <NWilson@airspan.com>
4685 Signed-off-by: Stefan Roese <sr@denx.de>
4687 commit d1a72545296800b7e219f93104ad5836f0003d66
4688 Author: Stefan Roese <sr@denx.de>
4689 Date: Mon Nov 27 17:34:10 2006 +0100
4691 [PATCH] Select NAND embedded environment from board configuration
4693 The current NAND Bootloader setup forces the environment
4694 variables to be in line with the bootloader. This change
4695 enables the configuration to be made in the board include
4696 file instead so that it can be individually enabled.
4698 Signed-off-by: Nick Spence <nick.spence@freescale.com>
4699 Signed-off-by: Stefan Roese <sr@denx.de>
4701 commit 15784862857c3c2214498defcfed84ff137fb81e
4702 Author: Stefan Roese <sr@denx.de>
4703 Date: Mon Nov 27 17:22:19 2006 +0100
4705 [PATCH] nand_wait() timeout fixes
4707 Two fixes for the nand_wait() function in
4708 drivers/nand/nand_base.c:
4710 1. Use correct timeouts. The original timeouts in Linux
4711 source are 400ms and 20ms not 40s and 20s
4713 2. Return correct error value in case of timeout. 0 is
4716 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
4717 Signed-off-by: Stefan Roese <sr@denx.de>
4719 commit da5553b095bf04f4f109ad7e565dae3aba47b230
4720 Author: Stefan Roese <sr@denx.de>
4721 Date: Mon Nov 27 17:04:06 2006 +0100
4723 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
4725 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
4726 arguments to bootm. It removes the getenv("disable_of") test that used
4727 to be used for this purpose.
4729 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4730 Acked-by: Jon Loeliger <jdl@freescale.com>
4732 commit a9398e018593782c5fa7d0741955fc1256b34c1e
4733 Author: Wolfgang Denk <wd@pollux.denx.de>
4734 Date: Mon Nov 27 15:32:42 2006 +0100
4736 Minor code cleanup. Update CHANGELOG.
4738 commit 1729b92cde575476684bffe819d0b7791b57bff2
4739 Author: Stefan Roese <sr@denx.de>
4740 Date: Mon Nov 27 14:52:04 2006 +0100
4742 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
4744 Signed-off-by: Stefan Roese <sr@denx.de>
4746 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
4747 Author: Stefan Roese <sr@denx.de>
4748 Date: Mon Nov 27 14:49:51 2006 +0100
4750 [PATCH] alpr: remove unused board specific flash driver
4752 Signed-off-by: Stefan Roese <sr@denx.de>
4754 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
4755 Author: Stefan Roese <sr@denx.de>
4756 Date: Mon Nov 27 14:48:41 2006 +0100
4758 [PATCH] 4xx: Fix problem with board specific reset code
4760 Signed-off-by: Stefan Roese <sr@denx.de>
4762 commit ec0c2ec725aec9524a177a77ce75559e644a931a
4763 Author: Stefan Roese <sr@denx.de>
4764 Date: Mon Nov 27 14:46:06 2006 +0100
4766 [PATCH] Remove testing 4xx enet PHY setup
4768 Signed-off-by: Stefan Roese <sr@denx.de>
4770 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
4771 Author: Stefan Roese <sr@denx.de>
4772 Date: Mon Nov 27 14:12:17 2006 +0100
4774 [PATCH] Update Prodrive ALPR board support (440GX)
4776 Signed-off-by: Stefan Roese <sr@denx.de>
4778 commit 78d620ebb5871d252270dedfad60c6568993b780
4779 Author: Wolfgang Denk <wd@atlas.denx.de>
4780 Date: Thu Nov 23 22:58:58 2006 +0100
4782 Updates for TQM5200 modules:
4783 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
4784 - simplify "udate" definitions
4786 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
4787 Author: Stefan Roese <sr@denx.de>
4788 Date: Wed Nov 22 13:20:50 2006 +0100
4790 [PATCH] PPC4xx start.S: Fix for processor errata
4792 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
4793 errata 1.12: 440_33 by moving patch up in code.
4795 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
4796 Signed-off-by: Stefan Roese <sr@denx.de>
4798 commit 4ef6251403f637841000e0fef9e832aa01339822
4799 Author: Stefan Roese <sr@denx.de>
4800 Date: Mon Nov 20 20:39:52 2006 +0100
4802 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
4804 Signed-off-by: Stefan Roese <sr@denx.de>
4806 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
4807 Author: Wolfgang Denk <wd@pollux.denx.de>
4808 Date: Mon Nov 20 10:28:30 2006 +0100
4812 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
4813 Author: Stefan Roese <sr@denx.de>
4814 Date: Mon Nov 13 13:55:24 2006 +0100
4816 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
4818 * Adds support for AMD command set Top Boot flash geometry reversal
4819 * Adds support for reading JEDEC Manufacturer ID and Device ID
4820 * Adds support for displaying command set, manufacturer id and
4822 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
4823 * Removes outdated change history (refer to git log instead)
4825 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
4826 Signed-off-by: Stefan Roese <sr@denx.de>
4828 commit b21b511d4c50408f4853f46f06b601272196223f
4829 Author: Wolfgang Denk <wd@pollux.denx.de>
4830 Date: Sun Nov 12 21:13:23 2006 +0100
4834 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
4835 Author: Bartlomiej Sieka <tur@semihalf.com>
4836 Date: Sat Nov 11 22:48:22 2006 +0100
4838 Disable the watchdog in the default config for the V38B board.
4840 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
4841 Author: Bartlomiej Sieka <tur@semihalf.com>
4842 Date: Sat Nov 11 22:43:00 2006 +0100
4844 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
4845 group is enabled for USB earlier (in cpu_init_f() instead of
4846 usb_lowlevel_init()).
4848 commit 91650b3e4de688038d4f71279c44858e3e2c6870
4849 Author: Wolfgang Denk <wd@pollux.denx.de>
4850 Date: Mon Nov 6 17:06:36 2006 +0100
4852 Sequential accesses to non-existent memory must be synchronized,
4853 at least on G2 cores.
4855 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
4857 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
4858 Author: Timur Tabi <timur@freescale.com>
4859 Date: Fri Nov 3 19:15:00 2006 -0600
4861 mpc83xx: Update 83xx to use fsl_i2c.c
4863 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
4864 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
4865 Added multiple I2C bus support to fsl_i2c.c.
4867 Signed-off-by: Timur Tabi <timur@freescale.com>
4869 commit d239d74b1c937984bc519083a8e7de373a390f06
4870 Author: Timur Tabi <timur@freescale.com>
4871 Date: Fri Nov 3 12:00:28 2006 -0600
4873 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
4875 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
4876 tree matches the other 8xxx trees.
4878 Signed-off-by: Timur Tabi <timur@freescale.com>
4880 commit f7fb2e703ec9688541416962724adff70a7322cb
4881 Author: Kim Phillips <kim.phillips@freescale.com>
4882 Date: Thu Nov 2 19:47:11 2006 -0600
4884 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
4886 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
4887 Author: Dave Liu <daveliu@freescale.com>
4888 Date: Thu Nov 2 18:05:50 2006 -0600
4890 mpc83xx: Fix the incorrect dcbz operation
4892 The 834x rev1.x silicon has one CPU5 errata.
4894 The issue is when the data cache locked with
4895 HID0[DLOCK], the dcbz instruction looks like no-op inst.
4897 The right behavior of the data cache is when the data cache
4898 Locked with HID0[DLOCK], the dcbz instruction allocates
4901 The 834x rev3.0 and later and 8360 have not this bug inside.
4903 So, when 834x rev3.0/8360 are working with ECC, the dcbz
4904 instruction will corrupt the stack in cache, the processor will
4907 However, the 834x rev1.x can work with ECC with these code,
4908 because the sillicon has this cache bug. The dcbz will not
4909 corrupt the stack in cache.
4910 Really, it is the fault code running on fault sillicon.
4912 This patch fix the incorrect dcbz operation. Instead of
4913 CPU FP writing to initialise the ECC.
4916 * Fix the incorrect dcbz operation instead of CPU FP
4917 writing to initialise the ECC memory. Otherwise, it
4918 will corrupt the stack in cache, The processor will checkstop
4921 Signed-off-by: Dave Liu <daveliu@freescale.com>
4923 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
4924 Author: Kim Phillips <kim.phillips@freescale.com>
4925 Date: Wed Nov 1 00:10:40 2006 -0600
4927 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
4929 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
4930 STDOUT_PATH configuration bits to mpc8349emds,
4931 mpc8349itx, and mpc8360emds board code.
4933 redo environment to use bootm with the fdtaddr
4934 for booting ARCH=powerpc kernels by default,
4935 and provide default fdtaddr values.
4937 commit 48041365b3420589ad464ebc7752e0053538b729
4938 Author: Kim Phillips <kim.phillips@freescale.com>
4939 Date: Wed Nov 1 00:07:25 2006 -0600
4941 mpc83xx: change ft code to modify local-mac-address property
4943 Update 83xx OF code to update local-mac-address properties
4944 for ethernet instead of the obsolete 'address' property.
4946 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
4947 Author: Timur Tabi <timur@freescale.com>
4948 Date: Tue Oct 31 21:23:16 2006 -0600
4950 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
4952 This patch also adds an improved I2C set_speed(), which handles all clock
4955 Signed-off-by: Timur Tabi <timur@freescale.com>
4957 commit ac4b5622ce050b5ee1e154b98df630d778661632
4958 Author: Dave Liu <daveliu@freescale.com>
4959 Date: Tue Oct 31 19:54:59 2006 -0600
4961 mpc83xx: add the README.mpc8360emds
4963 add doc/README.mpc8360emds to accompany the new board support
4965 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
4966 Author: Dave Liu <daveliu@freescale.com>
4967 Date: Fri Nov 3 12:11:15 2006 -0600
4969 mpc83xx: add QE ethernet support
4971 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
4973 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
4974 Author: Dave Liu <daveliu@freescale.com>
4975 Date: Fri Nov 3 19:33:44 2006 -0600
4977 mpc83xx: Add MPC8360EMDS basic board support
4979 Add support for the Freescale MPC8360EMDS board.
4980 Includes DDR, DUART, Local Bus, PCI.
4982 commit 23892e49352de74f7fac36ff90bb1be143d195e3
4983 Author: Dave Liu <daveliu@freescale.com>
4984 Date: Tue Oct 31 19:30:40 2006 -0600
4986 mpc83xx: add the QUICC Engine (QE) immap file
4988 common QE immap file. Also required for 8360.
4990 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
4991 Author: Dave Liu <daveliu@freescale.com>
4992 Date: Tue Oct 31 19:25:38 2006 -0600
4994 mpc83xx: Add 8360 specifics to 83xx immap
4996 Mainly add QE device dependencies, with appropriate 8360 protection.
4999 commit 988833324a7fda482c8ac3ca23eb539f8232e404
5000 Author: Timur Tabi <timur@freescale.com>
5001 Date: Tue Oct 31 19:14:41 2006 -0600
5003 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
5005 PREREQUISITE PATCHES:
5007 * This patch can only be applied after the following patches have been applied:
5009 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
5010 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
5014 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
5015 the clock for the 2nd USB board (Linux kernel will hang otherwise),
5016 and fix the CONFIG_BOOTARGS macro.
5018 Signed-off-by: Timur Tabi <timur@freescale.com>
5020 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
5021 Author: Timur Tabi <timur@freescale.com>
5022 Date: Tue Oct 31 18:44:42 2006 -0600
5024 mpc83xx: Add support for the MPC8349E-mITX
5026 PREREQUISITE PATCHES:
5028 * This patch can only be applied after the following patches have been applied:
5030 1) DNX#2006090742000024 "Add support for multiple I2C buses"
5031 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
5032 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
5033 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
5034 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
5038 * Add support for the Freescale MPC8349E-mITX reference design platform.
5039 The second TSEC (Vitesse 7385 switch) is not supported at this time.
5041 Signed-off-by: Timur Tabi <timur@freescale.com>
5043 commit 183da6d9b446cc12123455844ad1187e2375626f
5044 Author: Ben Warren <bwarren@qstreams.com>
5045 Date: Tue Sep 12 10:15:53 2006 -0400
5047 Additional MPC8349 support for multibus i2c
5051 Here is a patch for a file that was accidentally left out of a previous
5054 It accompanies the patch with ticket DNX#2006090742000024
5057 Change PCI initialization to use new multi-bus I2C API.
5062 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
5063 Author: Ben Warren <bwarren@qstreams.com>
5064 Date: Thu Sep 7 16:51:04 2006 -0400
5066 Multi-bus I2C implementation of MPC834x
5070 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
5071 family and the MPC8349EMDS board in particular.
5072 This patch requires Patch 1 (Add support for multiple I2C buses).
5073 Testing was performed on a 533MHz board.
5075 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
5077 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5080 Implemented driver-level code to support two I2C buses on the
5081 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
5082 are 50kHz, 100kHz and 400kHz on each bus.
5087 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
5088 Author: Ben Warren <bwarren@qstreams.com>
5089 Date: Thu Sep 7 16:50:54 2006 -0400
5091 Add support for multiple I2C buses
5095 Attached is a patch providing support for multiple I2C buses at the
5096 command level. The second part of the patch includes an implementation
5097 for the MPC834x CPU and MPC8349EMDS board.
5099 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
5101 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5105 1. Include new 'i2c' command (based on USB implementation) using
5106 CONFIG_I2C_CMD_TREE.
5108 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
5109 the commands to change bus number and speed are only available under the
5110 new 'i2c' command mentioned in the first bullet.
5112 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
5113 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
5114 of an array of bus-device pairs. Otherwise, it is an array of uchar.
5117 Added new 'i2c' master command for all I2C interaction. This is
5118 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
5119 setting I2C bus speed as well as changing the active bus if the board
5120 has more than one (conditionally compiled with
5121 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
5127 commit bed85caf872714ebf53013967a695c9d63acfc68
5128 Author: Timur Tabi <timur@freescale.com>
5129 Date: Tue Oct 31 18:13:36 2006 -0600
5131 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
5135 * Errata DDR6, which affects all current MPC 834x processors, lists changes
5136 required to maintain compatibility with various types of DDR memory. This
5137 patch implements those changes.
5139 Signed-off-by: Timur Tabi <timur@freescale.com>
5141 commit afd6e470f639883002c7c59d562690a5cb0f4865
5142 Author: Timur Tabi <timur@freescale.com>
5143 Date: Wed Oct 25 18:45:23 2006 -0500
5145 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
5147 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
5148 Author: Timur Tabi <timur@freescale.com>
5149 Date: Tue Aug 22 17:07:00 2006 -0500
5151 mpc83xx: Add support for variable flash memory sizes on 83xx systems
5155 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
5156 window registers, instead of using a hard-coded value of 8MB.
5158 Signed-off-by: Timur Tabi <timur@freescale.com>
5160 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
5161 Author: Tanya Jiang <tanya.jiang@freescale.com>
5162 Date: Thu Aug 3 18:38:13 2006 +0800
5164 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
5166 Unified TQM834x variable names with 83xx and consolidated macro
5167 in preparation for the 8360 and other upcoming 83xx devices.
5169 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
5171 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
5172 Author: Dave Liu <daveliu@freescale.com>
5173 Date: Wed Oct 25 14:41:21 2006 -0500
5175 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
5177 Incorporated the common unified variable names and the changes in preparation
5178 for releasing mpc8360 patches.
5180 Signed-off-by: Dave Liu <daveliu@freescale.com>
5182 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
5183 Author: Tanya Jiang <tanya.jiang@freescale.com>
5184 Date: Thu Aug 3 18:36:02 2006 +0800
5186 mpc83xx: Fix missing build for mpc8349emds pci.c
5188 Make pci build for mpc8349emds
5190 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
5192 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
5193 Author: Tanya Jiang <tanya.jiang@freescale.com>
5194 Date: Thu Aug 3 18:39:49 2006 +0800
5196 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
5198 Removed unused file resetvec.S for mpc83xx cpu
5200 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
5202 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
5203 Author: Nick Spence <Nick.Spence@freescale.com>
5204 Date: Sat Sep 30 00:32:59 2006 -0700
5206 NAND Flash verify across block boundaries
5208 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
5210 and the write crosses a block boundary. The pointer to the verification
5211 buffer (bufstart) is not being updated to reflect the starting of the
5213 block so the verification of the second block fails.
5217 * Fix NAND FLASH page verification across block boundaries
5219 commit f484dc791a3932537213c43c654cc1295c64b84c
5220 Author: Nick Spence <nick.spence@freescale.com>
5221 Date: Thu Sep 7 07:39:46 2006 -0700
5223 Added RGMII support to the TSECs and Marvell 881111 Phy
5225 Added a phy initialization to adjust the RGMII RX and TX timing
5226 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
5228 Signed-off-by: Nick Spence <nick.spence@freescale.com>
5230 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
5231 Author: roy zang <tie-fei.zang@freescale.com>
5232 Date: Fri Nov 3 13:10:00 2006 +0800
5234 Remove some unused CFG define.
5237 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
5238 Author: roy zang <tie-fei.zang@freescale.com>
5239 Date: Fri Nov 3 13:07:36 2006 +0800
5241 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
5242 Both work. 0xFF000000 seems more reasonable.
5244 commit c59200443072353044aa4bf737a5a60f9a9af231
5245 Author: Wolfgang Denk <wd@pollux.denx.de>
5246 Date: Thu Nov 2 15:15:01 2006 +0100
5248 Release U-Boot 1.1.6
5250 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
5251 Author: roy zang <tie-fei.zang@freescale.com>
5252 Date: Thu Nov 2 19:14:48 2006 +0800
5254 This patch comes from Yuli's posted patch on 8/8/2006
5255 titled "CFI Driver Little-Endian write Issue".
5257 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
5259 If that patch applied, please discard this one.
5260 Until now , I do not see his patch is applied. So please apply this one.
5262 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
5263 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5265 commit b825f158e449e1e9cf74c08e572955e122394c96
5266 Author: roy zang <tie-fei.zang@freescale.com>
5267 Date: Thu Nov 2 19:12:31 2006 +0800
5269 Tsi108 on chip i2c support.
5271 The i2c Interface provides a master-only, serial interface that can be
5272 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
5275 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5276 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5278 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
5279 Author: roy zang <tie-fei.zang@freescale.com>
5280 Date: Thu Nov 2 19:11:06 2006 +0800
5282 Tsi108 on chip pci controller support.
5284 If there is no pci card, the tsi108/109 pci configure read will
5285 cause a machine check exception to the processor. PCI error should
5286 also be cleared after the read.
5288 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5289 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5291 commit d1927cee977126e547ceeba23e4f978f377cfb8f
5292 Author: roy zang <tie-fei.zang@freescale.com>
5293 Date: Thu Nov 2 19:08:55 2006 +0800
5295 Tundra tsi108 on chip Ethernet controller support.
5297 The following is a brief description of the Ethernet controller:
5298 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
5299 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
5300 to manage the two physical connection devices (PHYs). Each Ethernet port
5301 has its own statistics monitor that tracks and reports key interface
5302 statistics. Each port supports a 256-entry hash table for address
5303 filtering. In addition, each port is bridged to the Switch Fabric
5304 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
5306 Each Ethernet port also has a pair of internal Ethernet DMA channels to
5307 support the transmit and receive data flows. The Ethernet DMA channels
5308 use descriptors set up in memory, the memory map of the device, and
5309 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
5310 handles arbitration for the Switch Fabric. The Controller also
5311 has a register businterface for register accesses and status monitor
5314 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
5315 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
5316 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
5317 data flows to and from the Ethernet Controller through the Switch Fabric.
5319 Each Ethernet port uses its transmit and receive DMA channels to manage
5320 data flows through buffer descriptors that are predefined by the
5321 system (the descriptors can exist anywhere in the system memory map).
5322 These descriptors are data structures that point to buffers filled
5323 with data ready to transmit over Ethernet, or they point to empty
5324 buffers ready to receive data from Ethernet.
5326 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5327 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5329 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
5330 Author: roy zang <tie-fei.zang@freescale.com>
5331 Date: Thu Nov 2 19:01:33 2006 +0800
5333 Tundra tsi108 header file.
5335 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
5336 PowerPC processors that offers numerous system interconnect options for
5337 embedded application designers. The Tsi108 can interconnect 60x or
5338 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
5339 and Flash. Provided the macro define for tsi108 chip.
5341 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5342 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5344 commit 87c4db09699c6b89176b31004afcb83eb1585d47
5345 Author: roy zang <tie-fei.zang@freescale.com>
5346 Date: Thu Nov 2 18:59:15 2006 +0800
5348 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5349 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
5351 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5352 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5354 commit 27801b8ab11c61b577e45742a515bb3b23b80241
5355 Author: roy zang <tie-fei.zang@freescale.com>
5356 Date: Thu Nov 2 18:57:21 2006 +0800
5358 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5359 Make ,config.mk and link file for the mpc7448hpc2 board.
5361 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5362 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5364 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
5365 Author: roy zang <tie-fei.zang@freescale.com>
5366 Date: Thu Nov 2 18:55:04 2006 +0800
5368 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5369 The mpc7448hpc2 board support header file.
5371 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5372 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5374 commit 625bb5ddb50b243f931262ca8c46956409471917
5375 Author: roy zang <tie-fei.zang@freescale.com>
5376 Date: Thu Nov 2 18:52:21 2006 +0800
5378 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5379 The mpc7448hpc2 board support low level assemble language init code.
5381 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5382 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5384 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
5385 Author: roy zang <tie-fei.zang@freescale.com>
5386 Date: Thu Nov 2 18:49:51 2006 +0800
5388 General code modification for mpc7448hpc2 board support.
5389 1. Add 7447A and 7448 processor support.
5390 2. Add the following flags.
5392 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
5393 (such as by switch on board), this flag should be set.
5395 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
5396 relocates to RAM, this flag should be set.
5398 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
5399 system hang in exception, this flag should be set.
5401 There is a design issue for tsi108/109 pci configure read. When pci scan
5402 the slots, if there is no pci card, the tsi108/9 will cause a machine
5403 check exception for mpc7448 processor.
5405 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5406 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5408 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
5409 Author: roy zang <tie-fei.zang@freescale.com>
5410 Date: Thu Nov 2 18:34:47 2006 +0800
5412 Add README file for mpc7448hpc2 board.
5413 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5415 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
5416 Author: Bartlomiej Sieka <tur@semihalf.com>
5417 Date: Wed Nov 1 02:04:38 2006 +0100
5419 Finish up support for MarelV38B board
5420 - add watchdog support
5421 - enable GPIO_WKUP_7 pin for input
5424 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
5425 Author: Bartlomiej Sieka <tur@semihalf.com>
5426 Date: Wed Nov 1 01:45:46 2006 +0100
5428 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
5429 * remove warnings when compiling ethaddr.c
5430 * adjust linker script (fixes a crash resulting from incorrect
5431 definition of __u_boot_cmd_start)
5432 - Some MarelV38B code cleanup.
5434 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
5435 Author: Bartlomiej Sieka <tur@semihalf.com>
5436 Date: Wed Nov 1 01:38:16 2006 +0100
5438 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
5439 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
5440 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
5441 MPC5XXX_WU_GPIO_DATA_O for affected boards.
5443 - Add defintions for some MPC5XXX GPIO pins.
5445 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
5446 Author: Bartlomiej Sieka <tur@semihalf.com>
5447 Date: Wed Nov 1 01:34:29 2006 +0100
5449 Changed MarelV38B board make target to lowercase. Config file cleanup.
5451 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
5452 Author: Wolfgang Denk <wd@pollux.denx.de>
5453 Date: Sun Oct 29 01:03:51 2006 +0200
5455 Automatically adjust ARFLAGS so "make -s" is really silent.
5457 commit fae684e89844856383bdf101440889557df3e6b1
5458 Author: Stefan Roese <sr@denx.de>
5459 Date: Sat Oct 28 16:45:00 2006 +0200
5461 [PATCH] omap925.c: Remove unused functions
5463 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5464 Signed-off-by: Stefan Roese <sr@denx.de>
5466 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
5467 Author: Stefan Roese <sr@denx.de>
5468 Date: Sat Oct 28 17:12:58 2006 +0200
5470 [PATCH] Add some missing machtypes for netstar & voiceblue boards
5472 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
5475 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5476 Signed-off-by: Stefan Roese <sr@denx.de>
5478 commit 856f054410cef52d868feb330168b2a4c4091328
5479 Author: Stefan Roese <sr@denx.de>
5480 Date: Sat Oct 28 15:55:52 2006 +0200
5482 [PATCH] NAND: Partition name support added to NAND subsystem
5484 chpart, nboot and NAND subsystem related commands now accept also partition
5485 name to specify offset.
5487 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5488 Signed-off-by: Stefan Roese <sr@denx.de>
5490 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
5491 Author: Wolfgang Denk <wd@pollux.denx.de>
5492 Date: Sat Oct 28 02:29:44 2006 +0200
5496 commit 2751a95abd1b96911081c357e96a12fa97b40dee
5497 Author: Wolfgang Denk <wd@pollux.denx.de>
5498 Date: Sat Oct 28 02:29:14 2006 +0200
5500 Enable commandline editing and hush shell on all TQM boards.
5502 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
5503 Author: Wolfgang Denk <wd@pollux.denx.de>
5504 Date: Sat Oct 28 02:28:02 2006 +0200
5506 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
5508 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
5509 Author: Wolfgang Denk <wd@denx.de>
5510 Date: Sat Oct 28 01:14:32 2006 +0200
5512 Check for illegal character '=' in environment variable names.
5514 Make sure the string passed as variable name does not contain a '='
5515 character. This not only prevents the common error or typing
5516 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
5517 also closes a backdoor which allowed to delete write-protected
5518 environment variables, for example by using "setenv ethaddr=".
5520 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
5521 Author: Wolfgang Denk <wd@pollux.denx.de>
5522 Date: Sat Oct 28 00:38:39 2006 +0200
5526 commit e11887a77d81077416a2d1c5e0354916fee8c034
5527 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5528 Date: Thu Oct 26 17:55:31 2006 +0200
5530 Don't pass any debug options directly to the assembler
5532 When passing the -g option to gcc, gcc automatically selects a
5533 suitable --g<format> option to pass on to the assembler.
5534 Thus, there's no point in forcing a specific debug option on the
5535 assembler using the -Wa mechanism.
5537 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5539 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
5540 Author: Jon Loeliger <jdl@freescale.com>
5541 Date: Fri Oct 27 07:47:22 2006 -0500
5543 MPC86xx: Cleaned up unused and conditionally used local variables.
5545 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5547 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
5548 Author: Wolfgang Denk <wd@pollux.denx.de>
5549 Date: Fri Oct 27 11:55:21 2006 +0200
5551 Fix "ar" flags in some Makefiles to allow for silent "make -s"
5553 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
5554 Author: Ben Warren <bwarren@qstreams.com>
5555 Date: Thu Oct 26 14:38:25 2006 -0400
5557 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
5558 to a TSEC (e.g. a switch is connected via RMII) or
5559 if the PHY is defective/incorrectly configured.
5561 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5563 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
5564 Author: Ben Warren <bwarren@qstreams.com>
5565 Date: Thu Oct 26 14:38:25 2006 -0400
5567 Fix TSEC driver: avoid crashes if PHY is not attached
5568 to a TSEC (e.g. a switch is connected via RMII) or
5569 if the PHY is defective/incorrectly configured.
5571 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5573 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
5574 Author: Wolfgang Denk <wd@pollux.denx.de>
5575 Date: Thu Oct 26 16:24:31 2006 +0200
5579 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
5580 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5581 Date: Wed Oct 25 15:48:59 2006 +0200
5583 Finish up support for the ATSTK1000/ATSTK1002 boards
5585 Add atstk1002_config target to Makefile and move the AVR32 section
5586 down below Blackfin so that it doesn't end up in the middle of
5589 Drop the autogenerated linker script thing for now. Will have to
5590 revisit how to handle chips with different flash and RAM layout
5593 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5595 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
5596 Author: Kumar Gala <galak@kernel.crashing.org>
5597 Date: Tue Oct 24 23:47:37 2006 -0500
5599 Added support for Multi-Image files that contain a device tree
5601 If a Multi-Image file contains a third image we try to use it as a
5602 device tree. The device tree image is assumed to be uncompressed in the
5603 image file. We automatically allocate space for the device tree in memory
5604 and provide an 8k pad to allow more than a reasonable amount of growth.
5606 Additionally, a device tree that was contained in flash will now automatically
5607 get copied to system memory as part of boot. Previously an error was
5608 reported if one tried to boot a device tree that was in flash.
5610 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5612 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
5613 Author: Wolfgang Denk <wd@denx.de>
5614 Date: Tue Oct 24 21:35:55 2006 +0200
5616 Switch to automatically generated CHANGELOG file.
5617 (use "make CHANGELOG" to update it from time to time)
5619 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
5620 Author: Stefan Roese <sr@denx.de>
5621 Date: Tue Oct 24 18:06:48 2006 +0200
5623 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
5624 Patch by Stefan Roese, 24 Oct 2006
5626 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
5627 Author: Wolfgang Denk <wd@pollux.denx.de>
5628 Date: Tue Oct 24 17:24:55 2006 +0200
5630 Merge with /home/wd/git/u-boot/master
5632 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
5633 Author: Wolfgang Denk <wd@pollux.denx.de>
5634 Date: Tue Oct 24 15:32:57 2006 +0200
5638 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
5639 Author: Wolfgang Denk <wd@pollux.denx.de>
5640 Date: Tue Oct 24 14:51:36 2006 +0200
5642 Move atstk1000 files into vendor specific directory.
5643 Patch by Haavard Skinnemoen, 12 Sep 2006
5645 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
5646 Author: Wolfgang Denk <wd@pollux.denx.de>
5647 Date: Tue Oct 24 14:42:37 2006 +0200
5649 Add ATSTK1000 and ATSTK1002 board support
5650 Patch by Haavard Skinnemoen, 06 Sep 2006
5652 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
5655 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
5656 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
5657 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
5658 CompactFlash cards. For more information, please see this page:
5660 http://www.atmel.com/dyn/products/tools.asp?family_id=682
5662 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
5665 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5667 commit f93ae788c3640fcde5db383471d45548ff4060d0
5668 Author: Wolfgang Denk <wd@pollux.denx.de>
5669 Date: Tue Oct 24 14:31:24 2006 +0200
5671 Add common serial driver for Atmel AT32 and AT91 chips
5672 Patch by Haavard Skinnemoen, 06 Sep 2006
5674 This is a first attempt at creating a common serial driver for Atmel
5675 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
5676 be possible to support AT91RM9200 and other ARM-based chips with some
5677 minor modifications.
5679 There's nothing fundamentally AVR32-specific in this driver, but it
5680 does use some features which are currently only defined for the
5682 * pm_get_clock_freq: Obtain the clock frequency of a given domain
5683 * gd->console_uart: A "struct device" containing information about
5684 register mappings, gpio resources and clocks associated with the
5687 For more information about these features, please see the "AT32AP
5690 commit 72a087e04705c26cad982879ebd06b5281bf825a
5691 Author: Wolfgang Denk <wd@pollux.denx.de>
5692 Date: Tue Oct 24 14:27:35 2006 +0200
5694 Add AT32AP CPU and AT32AP7000 SoC support
5695 Patch by Haavard Skinnemoen, 06 Sep 2006
5697 This patch adds support for the AT32AP CPU family and the AT32AP7000
5698 chip, which is the first chip implementing the AVR32 architecture.
5700 The AT32AP CPU core is a high-performance implementation featuring a
5701 7-stage pipeline, separate instruction- and data caches, and a MMU.
5702 For more information, please see the "AVR32 AP Technical Reference":
5704 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
5706 In addition to this, the AT32AP7000 chip comes with a large set of
5707 integrated peripherals, many of which are shared with the AT91 series
5708 of ARM-based microcontrollers from Atmel. Full data sheet is
5711 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
5713 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5715 commit 7b64fef33c66be648826c0ff9758298ef13d0604
5716 Author: Wolfgang Denk <wd@pollux.denx.de>
5717 Date: Tue Oct 24 14:21:16 2006 +0200
5719 Add AVR32 architecture support
5720 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
5722 This patch adds common infrastructure code for the Atmel AVR32
5723 architecture. See doc/README.AVR32 for details.
5725 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5727 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
5728 Author: Wolfgang Denk <wd@pollux.denx.de>
5729 Date: Tue Oct 24 13:57:33 2006 +0200
5731 Use -g instead of -gstabs in AFLAGS_DEBUG
5732 Patch by Haavard Skinnemoen, 30 Aug 2006
5734 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
5735 matter what the target's preferred debugging format is. This patch
5736 simply replaces -gstabs with -g, so that the default debugging format
5737 for the architecture is used.
5739 commit 965829872169c2996023840d98e1d85ad148d629
5740 Author: Wolfgang Denk <wd@pollux.denx.de>
5741 Date: Tue Oct 24 13:55:18 2006 +0200
5743 Fix/workaround broken dependency handling with make 3.81
5744 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
5746 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
5747 Author: Marian Balakowicz <m8@semihalf.com>
5748 Date: Mon Oct 23 22:17:05 2006 +0200
5750 Fix sequoia separate object direcory building problems.
5752 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
5753 Author: Jon Loeliger <jdl@freescale.com>
5754 Date: Fri Oct 20 17:16:35 2006 -0500
5756 Use generic I2C register block on 85xx and 86xx.
5758 Replace private IMMAP I2C structures with generic reg block
5759 and allow 86xx to have multiple I2C device busses.
5761 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5763 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
5764 Author: Jon Loeliger <jdl@freescale.com>
5765 Date: Fri Oct 20 15:54:34 2006 -0500
5767 Fix compilation warnings on a few 85xx boards.
5769 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5771 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
5772 Author: Jon Loeliger <jdl@freescale.com>
5773 Date: Fri Oct 20 15:50:15 2006 -0500
5775 Converted all 85xx boards to use a common FSL I2C driver.
5776 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
5777 And removed hard i2c path from a few u-boot.lds scipts too.
5778 Minor whitespace cleanups along the way.
5780 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5782 commit 4d45f69e362b05892c9e92a7907e5820995612aa
5783 Author: Jon Loeliger <jdl@freescale.com>
5784 Date: Thu Oct 19 12:02:24 2006 -0500
5786 Rewrite a series of goto statements as a sequences of
5787 conditional expressions instead.
5789 Use consistent return code 0/-1 for good/bad indicators.
5791 Include one fewer file if the driver isn't used at all.
5793 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5795 commit 7237c033b02fe295880435f1eb80819a0c987532
5796 Author: Jon Loeliger <jdl@freescale.com>
5797 Date: Thu Oct 19 11:02:16 2006 -0500
5799 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
5801 in an effort to begin to unify the umpteen FSL I2C drivers that
5802 are all otherwise very similar.
5804 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5806 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
5807 Author: Jon Loeliger <jdl@freescale.com>
5808 Date: Thu Oct 19 11:33:52 2006 -0500
5810 * Fix a bunch of compiler warnings for gcc 4.0
5812 Signed-off-by: Matthew McClintock <msm@freescale.com>
5814 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
5815 Author: Stefan Roese <sr@denx.de>
5816 Date: Tue Oct 17 06:14:31 2006 +0200
5818 Add monitor functions for indirect access to PPC440 DCR's
5819 Patch by Leonid Baryudin, 12 Oct 2006
5821 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
5822 Author: Jon Loeliger <jdl@freescale.com>
5823 Date: Fri Oct 13 16:47:53 2006 -0500
5825 Fixed leading whitespace issues.
5826 Removed spurious LAWAR thing.
5828 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5830 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
5831 Author: Jon Loeliger <jdl@freescale.com>
5832 Date: Thu Oct 12 10:42:36 2006 -0500
5834 Remove unneeded include files and local variable.
5836 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5838 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
5839 Author: Grant Likely <grant.likely@secretlab.ca>
5840 Date: Tue Oct 10 00:23:32 2006 -0600
5842 Fix possible uninitialized variable compiler warning.
5844 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
5845 do_bootm_linux() may be uninitialized. There is no possibility in the
5846 current code that len will get used uninitialized, but this fix follows
5847 the existing convention of setting both len and data to zero at the same
5850 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5852 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
5853 Author: Matthew McClintock <msm@freescale.com>
5854 Date: Wed Oct 11 15:13:01 2006 -0500
5856 * Fix a bunch of compiler warnings for gcc 4.0
5858 Signed-off-by: Matthew McClintock <msm@freescale.com>
5860 commit bf651baa365e5447246aad6a633ccd667cf24a39
5861 Author: Jon Loeliger <jdl@freescale.com>
5862 Date: Wed Oct 11 10:10:43 2006 -0500
5864 Move "ar" flags to config.mk to allow for silent "make -s"
5866 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
5867 Author: Jon Loeliger <jdl@freescale.com>
5868 Date: Tue Oct 10 17:19:03 2006 -0500
5870 Coding style changes to remove local varible blocks
5871 and reformat a bit nicer.
5873 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
5874 Author: Jon Loeliger <jdl@freescale.com>
5875 Date: Tue Oct 10 17:16:04 2006 -0500
5877 Fix whitespace issues.
5879 commit 7b382b7125f2397cce63253df62f183e3dfa2770
5880 Author: Jon Loeliger <jdl@freescale.com>
5881 Date: Tue Oct 10 17:14:45 2006 -0500
5883 Fix whitespace issues.
5885 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
5886 Author: Jon Loeliger <jdl@freescale.com>
5887 Date: Tue Oct 10 17:06:53 2006 -0500
5889 Fix whitespace issues.
5891 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
5892 Author: Jon Loeliger <jdl@freescale.com>
5893 Date: Tue Oct 10 17:03:43 2006 -0500
5895 Ran lindent and cleaned up whitespace issues.
5896 Format for 80-columns too.
5898 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
5899 Author: Jon Loeliger <jdl@freescale.com>
5900 Date: Tue Oct 10 17:02:22 2006 -0500
5902 Fix whitespace and 80-col issues.
5904 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
5905 Author: Stefan Roese <sr@denx.de>
5906 Date: Sat Oct 7 11:36:51 2006 +0200
5908 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
5909 Patch by Stefan Roese, 07 Oct 2006
5911 commit 5bc528fa4da751d472397b308137238a6465afd2
5912 Author: Stefan Roese <sr@denx.de>
5913 Date: Sat Oct 7 11:35:25 2006 +0200
5915 Update ALPR code (NAND support working now)
5916 Patch by Stefan Roese, 07 Oct 2006
5918 commit 77d5034847d328753b80c46b83f960a14a26f40e
5919 Author: Stefan Roese <sr@denx.de>
5920 Date: Sat Oct 7 11:33:03 2006 +0200
5922 Remove compile warnings in fpga code
5923 Patch by Stefan Roese, 07 Oct 2006
5925 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
5926 Author: Stefan Roese <sr@denx.de>
5927 Date: Sat Oct 7 11:30:52 2006 +0200
5929 Add CONFIG_BOARD_RESET to configure board specific reset function
5930 Patch by Stefan Roese, 07 Oct 2006
5932 commit f55df18187e7a45cb73fec4370d12135e6691ae1
5933 Author: John Traill <john.traill@freescale.com>
5934 Date: Fri Sep 29 08:23:12 2006 +0100
5936 Fix missing tCycle/modfreq calculation.
5938 Signed-off-by: John Traill <john.traill@freescale.com>
5940 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
5941 Author: Andy Fleming <afleming@freescale.com>
5942 Date: Wed Sep 13 10:33:35 2006 -0500
5944 Updated config headers to add default FDT-based booting
5946 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
5947 Author: Andy Fleming <afleming@freescale.com>
5948 Date: Wed Sep 13 10:34:18 2006 -0500
5950 Add support for eTSEC 3 & 4 on 8548 CDS
5952 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
5953 This will only work on rev 1.3 boards (but doesn't break older boards)
5954 * Cleaned up some comments to reflect the expanded role of tsec
5957 commit 084d648b109c8984f83674043c1a7fa3885ef801
5958 Author: Andy Fleming <afleming@freescale.com>
5959 Date: Wed Sep 13 10:33:56 2006 -0500
5961 Added code to support 2.6.18 PCI changes in u-boot
5963 * Added code to swizzle the IRQ map for the PCI
5965 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
5966 Author: Jon Loeliger <jdl@freescale.com>
5967 Date: Tue Sep 19 09:34:10 2006 -0500
5969 Modified makefile for new build mechanism.
5971 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5973 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
5974 Author: Jon Loeliger <jdl@freescale.com>
5975 Date: Thu Sep 14 08:40:36 2006 -0500
5977 Handle 86xx SVR values according to the new Reference Manual.
5978 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
5979 by the byte in bits 16-23 instead.
5980 Thanks to Jason Jin for noticing.
5982 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5984 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
5985 Author: Zhang Wei <wei.zhang@freescale.com>
5986 Date: Mon Aug 28 14:25:31 2006 +0800
5988 Fixed an OF-tree off-by-one bug when adding a new property name.
5989 This bug will cause the kernel booting to pause a long time.
5991 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
5992 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
5994 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
5995 Author: Jon Loeliger <jdl@freescale.com>
5996 Date: Tue Aug 29 11:05:09 2006 -0500
5998 Remove trailing empty lines.
6000 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
6001 Author: Jon Loeliger <jdl@freescale.com>
6002 Date: Tue Aug 29 09:48:49 2006 -0500
6004 Remove bogus msync and use volatile asm.
6006 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
6007 Author: Jon Loeliger <jdl@freescale.com>
6008 Date: Tue Aug 29 08:17:14 2006 -0500
6010 Add myself as maintainer for MPC8641HPCN.
6012 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
6013 Author: Zhang Wei <wei.zhang@freescale.com>
6014 Date: Mon Aug 28 14:25:31 2006 +0800
6016 Fixed an OF-tree off-by-one bug when adding a new property name.
6017 This bug will cause the kernel booting to pause a long time.
6019 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6021 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
6022 Author: Haiying Wang <haiying.wang@freescale.com>
6023 Date: Fri Aug 25 14:38:34 2006 -0400
6025 Change ramdiskaddr and dtbaddr
6026 Remove PEX fluff commands.
6028 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
6029 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6031 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
6032 Author: Matthew McClintock <msm@freescale.com>
6033 Date: Wed Aug 23 13:32:45 2006 -0500
6035 * Another small fix for booting with disable_of
6037 Signed-off-by: Matthew McClintock <msm@freescale.com>
6039 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
6040 Author: Jon Loeliger <jdl@freescale.com>
6041 Date: Wed Aug 23 11:04:43 2006 -0500
6043 Cleanup and lindent new AHCI driver.
6045 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
6046 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
6047 Date: Wed Aug 23 19:15:12 2006 +0800
6049 Add AHCI define and sata support for MPC8641HPCN board.
6051 Signed-off-by:Jason Jin<jason.jin@freescale.com>
6053 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
6054 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
6055 Date: Wed Aug 23 19:10:44 2006 +0800
6057 Add AHCI support to u-boot
6059 Add AHCI support in u-boot, enable the sata disk controllers which
6060 following the AHCI protocol.
6062 Signed-off-by:Jason Jin<jason.jin@freescale.com>
6064 commit d8ea2acf5f137cae99417df4f573d036ee384668
6065 Author: Zhang Wei <wei.zhang@freescale.com>
6066 Date: Wed Aug 23 17:54:32 2006 +0800
6068 Add dtb boot-up parameter to default boot commands.
6070 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6072 commit b93775c2036b99baa390ea425c4771895bbc63c4
6073 Author: Jon Loeliger <jdl@freescale.com>
6074 Date: Tue Aug 22 18:26:08 2006 -0500
6076 Cleanup even more poorly introduced whitespace.
6078 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
6079 Author: Jon Loeliger <jdl@freescale.com>
6080 Date: Tue Aug 22 18:07:00 2006 -0500
6082 Cleanup more poorly introduced whitespace.
6084 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
6085 Author: Jon Loeliger <jdl@freescale.com>
6086 Date: Tue Aug 22 17:54:05 2006 -0500
6088 Cleanup poorly introduced whitespace.
6090 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
6091 Author: Jon Loeliger <jdl@freescale.com>
6092 Date: Tue Aug 22 12:25:27 2006 -0500
6094 General indent and whitespace cleanups.
6096 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
6097 Author: Jon Loeliger <jdl@freescale.com>
6098 Date: Tue Aug 22 12:06:18 2006 -0500
6100 General indent and whitespace cleanups.
6102 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
6103 Author: Jon Loeliger <jdl@freescale.com>
6104 Date: Tue Aug 22 10:42:21 2006 -0500
6106 Cleanup compiler warnings.
6108 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
6109 Author: Matthew McClintock <msm@freescale.com>
6110 Date: Tue Aug 22 09:31:59 2006 -0500
6112 Fix disable_of booting
6114 Signed-off-by: Matthew McClintock <msm@freescale.com>
6116 commit 87a449c8ac396420cb24260f717ea9e6faa82047
6117 Author: Matthew McClintock <msm@freescale.com>
6118 Date: Tue Aug 22 09:23:55 2006 -0500
6120 Support for FDT in uImage format, error when using FDT from flash
6122 Signed-off-by: Matthew McClintock <msm@freescale.com>
6124 commit 75c299c38369d01addd5e054b8a16217b70f4a86
6125 Author: Haiying Wang <haiying.wang@freescale.com>
6126 Date: Tue Aug 15 15:12:55 2006 -0400
6128 Unlock cache before kernel starts up for MPC86xx
6130 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
6131 Author: Haiying Wang <haiying.wang@freescale.com>
6132 Date: Tue Aug 15 15:13:15 2006 -0400
6134 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
6136 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
6137 Author: Haiying Wang <haiying.wang@freescale.com>
6138 Date: Tue Aug 15 15:12:55 2006 -0400
6140 Unlock cache before kernel starts up for MPC86xx
6142 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
6143 Author: Haiying Wang <haiying.wang@freescale.com>
6144 Date: Tue Aug 15 15:13:15 2006 -0400
6146 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
6148 commit 86c8e17f25e972a7e272950a0735fad84e082b88
6149 Author: Matthew McClintock <msm@freescale.com>
6150 Date: Wed Aug 16 13:59:47 2006 -0500
6152 * Fix disable_of booting
6154 Signed-off-by: Matthew McClintock <msm@freescale.com>
6156 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
6157 Author: Matthew McClintock <msm@freescale.com>
6158 Date: Wed Aug 16 10:54:09 2006 -0500
6160 * Support for FDT in uImage format, error when using FDT from flash
6162 Signed-off-by: Matthew McClintock <msm@freescale.com>
6164 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
6165 Author: Stefan Roese <sr@denx.de>
6166 Date: Tue Aug 15 14:22:35 2006 +0200
6168 Add initial support for the ALPR board from Prodrive
6169 NAND needs some additional testing
6170 Patch by Heiko Schocher, 15 Aug 2006
6172 commit f0ff4692ff3372dec55074a8eb444943ab095abb
6173 Author: Stefan Roese <sr@denx.de>
6174 Date: Tue Aug 15 14:15:51 2006 +0200
6176 Add FPGA Altera Cyclone 2 support
6177 Patch by Heiko Schocher, 15 Aug 2006
6179 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
6180 Author: Jon Loeliger <jdl@freescale.com>
6181 Date: Mon Aug 14 15:33:38 2006 -0500
6183 Fix BAT0 to actually be cacheable, non-guarded as documented.
6185 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6187 commit 40bc83559db5745681909fd7382ae509567e116d
6188 Author: Jon Loeliger <jdl@freescale.com>
6189 Date: Wed Aug 9 15:32:16 2006 -0500
6191 Removed MPC8641HPCN DTS source file from build.
6192 It is no longer linked into U-Boot; its sources are
6193 now located in the kernel tree.
6195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6197 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
6198 Author: Matthew McClintock <msm@freescale.com>
6199 Date: Wed Jun 28 10:47:03 2006 -0500
6201 * Switched default PCI speed for 8540 ADS back to 33MHz
6203 * Added comments and a printf to warn that PCI-X won't
6205 Patch by Andy Fleming 17-Mar-2006
6207 Signed-off-by: Andy Fleming <afleming@freescale.com>
6209 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
6210 Author: Matthew McClintock <msm@freescale.com>
6211 Date: Wed Jun 28 10:46:35 2006 -0500
6213 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
6215 Signed-off-by: Andy Fleming <afleming@freescale.com>
6217 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
6218 Author: Matthew McClintock <msm@freescale.com>
6219 Date: Wed Jun 28 10:46:13 2006 -0500
6221 * Added VIA configuration table
6223 * Added support for PCI2 on CDS
6224 Patch by Andy Fleming 17-Mar-2006
6226 Signed-off-by: Andy Fleming <afleming@freescale.com>
6228 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
6229 Author: Matthew McClintock <msm@freescale.com>
6230 Date: Wed Jun 28 10:45:41 2006 -0500
6232 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
6234 Signed-off-by: Andy Fleming <afleming@freescale.com>
6236 commit 97074ed9655309b64231bc2cee69fe85399f8055
6237 Author: Matthew McClintock <msm@freescale.com>
6238 Date: Wed Jun 28 10:45:17 2006 -0500
6240 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
6242 Signed-off-by: Andy Fleming <afleming@freescale.com>
6244 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
6245 Author: Matthew McClintock <msm@freescale.com>
6246 Date: Wed Jun 28 10:44:49 2006 -0500
6248 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
6250 Signed-off-by: Andy Fleming <afleming@freescale.com>
6252 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
6253 Author: Matthew McClintock <msm@freescale.com>
6254 Date: Wed Jun 28 10:44:23 2006 -0500
6256 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
6258 Signed-off-by: Andy Fleming <afleming@freescale.com>
6260 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
6261 Author: Matthew McClintock <msm@freescale.com>
6262 Date: Wed Jun 28 10:43:36 2006 -0500
6264 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
6266 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6268 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
6269 Author: Matthew McClintock <msm@freescale.com>
6270 Date: Wed Jun 28 10:43:00 2006 -0500
6272 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
6274 commit 5498d90312aad9f6bdbf047986027c35b03cd163
6275 Author: Matthew McClintock <msm@freescale.com>
6276 Date: Wed Jun 28 10:42:24 2006 -0500
6278 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
6280 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
6281 Author: Matthew McClintock <msm@freescale.com>
6282 Date: Wed Jun 28 10:41:37 2006 -0500
6284 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
6286 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
6287 Author: John Traill <john.traill@freescale.com>
6288 Date: Wed Aug 9 14:33:50 2006 +0100
6290 Add Rapidio support for the MPC8641HPCN
6292 Signed-off-by: John Traill <john.traill@freescale.com>
6294 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
6295 Author: John Traill <john.traill@freescale.com>
6296 Date: Tue Aug 8 11:32:43 2006 +0100
6298 Fix caslat calculation
6300 Signed-off-by: John Traill <john.traill@freescale.com>
6302 commit 709d3073e74153278e7904a70819bbef7df50e1a
6303 Author: Jon Loeliger <jdl@freescale.com>
6304 Date: Thu Aug 3 16:17:56 2006 -0500
6306 Convert to mac-address in ethernet nodes.
6308 commit 71748af833ca1017edf1415be376366ff2937d17
6309 Author: Haiying Wang <haiying.wang@freescale.com>
6310 Date: Fri Jul 28 12:41:35 2006 -0400
6312 Correct the irq value of DUART2
6314 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
6315 Author: Haiying Wang <haiying.wang@freescale.com>
6316 Date: Fri Jul 28 12:41:41 2006 -0400
6318 Change the space size of PEX IO in README
6320 commit 239db37c94f7a92941c4465feceb867c609241c5
6321 Author: Haiying Wang <haiying.wang@freescale.com>
6322 Date: Fri Jul 28 12:41:18 2006 -0400
6324 Move get_board_sys_clk to board directory
6326 commit 492900b985439fbce1a118afde1e35def870db03
6327 Author: John Traill <john.traill@freescale.com>
6328 Date: Fri Jul 28 09:03:54 2006 +0100
6330 Fix 8641HPCN pollution
6332 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
6333 Author: John Traill <john.traill@freescale.com>
6334 Date: Fri Jul 28 08:16:06 2006 +0100
6336 Fix 8641HPCN timebase
6338 commit c86360b830f1eecd7a72208575dde4f57879faea
6339 Author: Zhang Wei <wei.zhang@freescale.com>
6340 Date: Fri Jul 28 00:01:34 2006 +0800
6342 Fixed OF device tree of mpc86xxhpcn board.
6344 The changes works in with kernel irq mapping rework.
6346 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6348 commit bea3f28d285942bf3f7ab339ce85178ded544225
6349 Author: Haiying Wang <haiying.wang@freescale.com>
6350 Date: Wed Jul 12 10:48:05 2006 -0400
6352 Add support for reading and writing mac addresses to or from ID EEPROM.
6354 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
6355 With attached patch, we can use command "mac/mac read/mac save/"
6356 to read and write EEPROM under u-boot prompt.
6358 U-boot will calculate the checksum of EEPROM while bootup,
6359 if it is right, then u-boot will check whether the mac address
6360 of eTSEC0/1/2/3 is availalbe (non-zero).
6362 If there is mac address availabe in EEPROM, u-boot will use it,
6363 otherewise, u-boot will use the mac address defined in
6364 MPC8641HPCN.h. This matches the requirement to set unique mac address
6367 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
6368 Signed-off-by: York Sun <yorksun@freescale.com>
6370 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
6371 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
6372 Date: Thu Jul 13 10:35:10 2006 -0500
6374 Fixed initrd issue by define big RAM
6376 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
6378 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
6379 Author: Jason Jin <Jason.jin@freescale.com>
6380 Date: Fri Jul 7 10:01:45 2006 -0500
6382 We made a u-boot patch to fix the hang up issue
6383 when booting filesystem from ramdisk.
6385 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
6387 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
6388 Author: Matthew McClintock <msm@freescale.com>
6389 Date: Wed Jun 28 10:47:03 2006 -0500
6391 * Switched default PCI speed for 8540 ADS back to 33MHz
6392 * Added comments and a printf to warn that PCI-X won't
6394 Patch by Andy Fleming 17-Mar-2006
6396 Signed-off-by: Andy Fleming <afleming@freescale.com>
6398 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
6399 Author: Matthew McClintock <msm@freescale.com>
6400 Date: Wed Jun 28 10:46:35 2006 -0500
6402 * Fixed a bug where 8555 PCI code used the old variable and
6404 Patch by Andy Fleming 17-Mar-2006
6406 Signed-off-by: Andy Fleming <afleming@freescale.com>
6408 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
6409 Author: Matthew McClintock <msm@freescale.com>
6410 Date: Wed Jun 28 10:46:13 2006 -0500
6412 * Added VIA configuration table
6413 * Added support for PCI2 on CDS
6414 Patch by Andy Fleming 17-Mar-2006
6416 Signed-off-by: Andy Fleming <afleming@freescale.com>
6418 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
6419 Author: Matthew McClintock <msm@freescale.com>
6420 Date: Wed Jun 28 10:45:41 2006 -0500
6422 * Fixed PCI memory definitions
6423 Patch by Andy Fleming 17-Mar-2006
6425 Signed-off-by: Andy Fleming <afleming@freescale.com>
6427 commit 087454609e47295443af793a282cddcd91a5f49c
6428 Author: Matthew McClintock <msm@freescale.com>
6429 Date: Wed Jun 28 10:45:17 2006 -0500
6431 * Added support for initializing second PCI bus on 85xx
6432 Patch by Andy Fleming 17-Mar-2006
6434 Signed-off-by: Andy Fleming <afleming@freescale.com>
6436 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
6437 Author: Matthew McClintock <msm@freescale.com>
6438 Date: Wed Jun 28 10:44:49 2006 -0500
6440 * Added PCI-X #defines for PCI-X initialization
6441 Patch by Andy Fleming on 17-Mar-2006
6443 Signed-off-by: Andy Fleming <afleming@freescale.com>
6445 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
6446 Author: Matthew McClintock <msm@freescale.com>
6447 Date: Wed Jun 28 10:44:23 2006 -0500
6449 * Made sure the code which disables prefetch for PCI devices
6450 sets the size of the prefetch region to 0
6451 Patch by Andy Fleming on 17-Mar-2006
6453 Signed-off-by: Andy Fleming <afleming@freescale.com>
6455 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
6456 Author: Matthew McClintock <msm@freescale.com>
6457 Date: Wed Jun 28 10:43:36 2006 -0500
6459 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
6460 Patch by Jon Loeliger 17-Jan-2006
6462 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6464 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
6465 Author: Matthew McClintock <msm@freescale.com>
6466 Date: Wed Jun 28 10:43:00 2006 -0500
6468 * Removed the oftree.dts for stxxtx in light of the changes
6469 to the flat device tree handling code
6470 Patch by Matthew McClintock 26-June-2006
6472 commit 1b380ec225665e73959677f3893dc658c5925e05
6473 Author: Matthew McClintock <msm@freescale.com>
6474 Date: Wed Jun 28 10:42:24 2006 -0500
6476 * Patch to modify ft_build.c to update flat device trees in place
6477 Patch by Matthew McClintock 26-June-2006
6479 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
6480 Author: Matthew McClintock <msm@freescale.com>
6481 Date: Wed Jun 28 10:41:37 2006 -0500
6483 * Modify bootm command to support booting with flat device trees
6484 Patch by Matthew McClintock 26-June-2006
6486 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
6487 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
6488 Date: Wed Jun 28 08:43:56 2006 -0500
6490 Change Id to symbolic name for RTL8139
6492 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6494 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
6495 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6496 Date: Tue Jun 27 18:12:10 2006 +0800
6498 Fix RTL8139 in big endian
6500 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
6501 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
6503 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
6504 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6505 Date: Tue Jun 27 18:12:23 2006 +0800
6507 Fix Tsec bug when no link
6509 When tftp a non-exist file from the tftp server, u-boot will check
6510 the link of all eth port. The original file will return wrong link
6511 state on the no link ports.
6513 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
6515 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
6516 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6517 Date: Tue Jun 27 18:12:02 2006 +0800
6519 Fix bug for io_bar size during pci scan
6521 During the pci scan process, Some devices return bar_reponse with the
6522 highest bytes 0, such as the pci bridge in uli1575 return bar_response
6523 with 0xffffff, So the bar_size should be manually set under 64K.
6525 Signed-off-by: Jason Jin <jason.jin@freescale.com>
6527 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
6528 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6529 Date: Tue Jun 27 18:11:54 2006 +0800
6531 Enable PCIE1 for MPC8641HPCN board
6533 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6535 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
6536 Author: Jon Loeliger <jdl@freescale.com>
6537 Date: Thu Jun 22 08:51:46 2006 -0500
6539 Fix bug in 8641hpcn reset command with no args.
6541 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
6542 Acked-by: Jon Loeliger <jdl@freescale.com>
6544 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
6545 Author: Zhang Wei <wei.zhang@freescale.com>
6546 Date: Tue Jun 20 17:47:15 2006 +0800
6548 Reworked IRQ mapping in OF-tree.
6550 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
6551 Author: Jon Loeliger <jdl@freescale.com>
6552 Date: Thu Jun 15 21:33:37 2006 -0500
6554 Do not enable address translation on secondary CPUs.
6555 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
6557 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6559 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
6560 Author: Jon Loeliger <jdl@jdl.com>
6561 Date: Wed Jun 7 10:53:55 2006 -0500
6563 Fix a get_board_sys_clk() use-before-def warning.
6565 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6567 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
6568 Author: Jon Loeliger <jdl@jdl.com>
6569 Date: Wed Jun 7 10:52:49 2006 -0500
6571 Allow DTC path to be passed in.
6573 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6575 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
6576 Author: Haiying Wang <haiying.wang@freescale.com>
6577 Date: Tue Jun 6 16:54:29 2006 -0400
6579 Modify the IRQ of DUART2
6581 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
6582 Author: Jon Loeliger <jdl@jdl.com>
6583 Date: Wed May 31 13:55:35 2006 -0500
6587 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6589 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
6590 Author: Jon Loeliger <jdl@jdl.com>
6591 Date: Wed May 31 12:44:44 2006 -0500
6593 White space cleanup.
6594 Some 80-column cleanups.
6595 Convert printf() to puts() where possible.
6596 Use #include "spd_sdram.h" as needed.
6597 Enhanced reset command usage message a bit.
6599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6601 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
6602 Author: Jon Loeliger <jdl@jdl.com>
6603 Date: Wed May 31 11:39:34 2006 -0500
6605 Removed unneeded local_bus_init() from 8641HPCN board.
6607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6609 commit 4d3d729c16c392d2982d3266b659d333c927697d
6610 Author: Jon Loeliger <jdl@jdl.com>
6611 Date: Wed May 31 11:24:28 2006 -0500
6613 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
6615 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6617 commit b2a941de060350ad15878d8219825f4950e9bb8e
6618 Author: Jon Loeliger <jdl@jdl.com>
6619 Date: Wed May 31 10:07:28 2006 -0500
6621 Remove dead debug code.
6623 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6625 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
6626 Author: Jon Loeliger <jdl@freescale.com>
6627 Date: Tue May 30 17:47:00 2006 -0500
6629 Move mpc86xx PIXIS code to board directory
6631 First cut at moving the PIXIS platform code out of
6632 the 86xx cpu directory and into board/mpc8641hpcn
6635 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6637 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
6638 Author: Haiying Wang <Haiying.Wang@freescale.com>
6639 Date: Tue May 30 09:10:32 2006 -0500
6641 Improve "reset" command's interaction with watchdog.
6643 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
6644 "reset altbank wd" will reset another bank WITH watch dog enabled
6645 "diswd" will disable watch dog after u-boot boots up successfully
6647 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6649 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
6650 Author: Haiying Wang <Haiying.Wang@freescale.com>
6651 Date: Tue May 30 08:51:19 2006 -0500
6653 Fix two SDRAM setup bugs.
6656 Enable 1T/2T based on number of DIMMs present.
6658 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6660 commit d11fec5015334deb2010e36ce00bb118cc5429a5
6661 Author: Haiying Wang <Haiying.Wang@freescale.com>
6662 Date: Fri May 26 10:24:48 2006 -0500
6664 Add first draft of the MPC8641HPCN doc/README.
6666 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6668 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
6669 Author: Haiying Wang <Haiying.Wang@freescale.com>
6670 Date: Fri May 26 10:13:04 2006 -0500
6672 Added pci@8000 block.
6673 Updated ethernet interrupt mappings (moved up 48).
6674 Cleaned up a few comments.
6676 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6678 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
6679 Author: Haiying Wang <Haiying.Wang@freescale.com>
6680 Date: Fri May 26 10:01:16 2006 -0500
6682 Allow args on reset command.
6684 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6686 commit 14e37081ff3cac7ebe6e93836523429853b6b292
6687 Author: Jon Loeliger <jdl@jdl.com>
6688 Date: Fri May 19 13:28:39 2006 -0500
6690 Change arbitration to round-robin for SMP linux.
6692 commit 9a655876e5995be80f49054e2509500e871e4d3a
6693 Author: Jon Loeliger <jdl@jdl.com>
6694 Date: Fri May 19 13:26:34 2006 -0500
6696 Enable dual DDR controllers and interleaving.
6698 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
6699 Author: Jon Loeliger <jdl@jdl.com>
6700 Date: Fri May 19 13:22:44 2006 -0500
6702 Update 86xx address map and LAWBARs.
6704 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
6705 Author: Jon Loeliger <jdl@jdl.com>
6706 Date: Fri May 19 13:14:15 2006 -0500
6708 Remove L2 Cache invalidate polling.
6710 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
6711 Author: Jon Loeliger <jdl@jdl.com>
6712 Date: Fri May 19 12:33:09 2006 -0500
6714 Enable 2nd CPU and I2C.
6716 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
6717 Author: Jon Loeliger <jdl@freescale.com>
6718 Date: Mon May 15 07:26:56 2006 -0500
6720 Update interrupt mapping.
6722 commit 6cfea33477b04b63ed47386ed1629529484c33ba
6723 Author: Haiying Wang <Haiying.Wang@freescale.com>
6724 Date: Wed May 10 09:38:06 2006 -0500
6726 Remove unneeded INIT_RAM_LOCK cache twiddling.
6727 Correctly tracks r29 as global data pointer now.
6729 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6731 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
6732 Author: Jon Loeliger <jdl@freescale.com>
6733 Date: Wed May 10 09:33:07 2006 -0500
6735 Remove unnecessary flash.c file.
6737 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
6738 Author: Jon Loeliger <jdl@freescale.com>
6739 Date: Tue May 9 08:23:49 2006 -0500
6741 Get MPC8641HPCN flash images working.
6743 Enable the CFI driver.
6744 Remove bogus LAWBAR7 cruft.
6745 Use correct TEXT_BASE, Fixup load script.
6746 Enable SPD EEPROM during DDR setup.
6747 Use generic RFC 1918 IP addresses by default.
6749 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
6750 Author: Jon Loeliger <jdl@freescale.com>
6751 Date: Thu Apr 27 10:15:16 2006 -0500
6753 Cleanup whitespaces and style issues.
6754 Removed //-style comments.
6755 Use 80-column lines.
6756 Remove trailing whitespace.
6757 Remove dead code and debug cruft.
6759 commit a2320a6bf8113a09544c42d160d10ac69d049a03
6760 Author: Jon Loeliger <jdl@freescale.com>
6761 Date: Thu Apr 27 08:22:39 2006 -0500
6763 Revert bad PCI prefetch limit change.
6765 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
6766 Author: Jon Loeliger <jdl@freescale.com>
6767 Date: Wed Apr 26 17:58:56 2006 -0500
6769 Initial support for MPC8641 HPCN board.