* Patch by Stephan Linz, 09 Mar 2004
[platform/kernel/u-boot.git] / CHANGELOG
1 ======================================================================
2 Changes for U-Boot 1.0.2:
3 ======================================================================
4
5 * Patch by Stephan Linz, 09 Mar 2004
6   - Add support for the SSV ADNP/ESC1 (Nios Softcore)
7
8 * Patch by George G. Davis, 9 Mar 2004:
9   fix recent build failure for SA1100 target
10
11 * Patch by Travis Sawyer, 09 Mar 2004:
12   Support native interrupt mode for the IBM440GX.
13   Previously it was running in 440GP compatibility mode.
14
15 * Patch by Philippe Robin, 09 Mar 2004:
16   Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
17   Platform support.
18
19 * Patch by Masami Komiya, 08 Mar 2004:
20   Don't overwrite server IP address or boot file name
21   when the boot server does not return values
22
23 * Patch by listmember@orkun.us, 5 Mar 2004:
24   Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
25
26 * Patch by Tolunay Orkun, 5 Mar 2004:
27   Fix early board initialization for Cogent CSB272 board
28
29 * Patch by Ed Okerson, 3 Mar 2004:
30   fix CFI flash writes for little endian systems
31
32 * Patch by Reinhard Meyer, 01 Mar 2004:
33   generalize USB and IDE support for MPC5200 with according
34   changes to IceCube.h and TOP5200.h
35   add Am29LV256 256 MBit FLASH support for TOP5200 boards
36   add info about USB and IDE to README
37
38 * Patch by Yuli Barcohen, 4 Mar 2004:
39   Fix problems with GCC 3.3.x which changed handling of global
40   variables explicitly initialized to zero (now in .bss instead of
41   .data as before).
42
43 * Patch by Leon Kukovec, 02 Mar 2004:
44   add strswab() to fix IDE LBA capacity, firmware and model numbers
45   on little endian machines
46
47 * Patch by Masami Komiya, 02 Mar 2004:
48   - Remove get_ticks() from NFS code
49   - Add verification of RPC transaction ID
50
51 * Patch by Pierre Aubert, 02 Mar 2004:
52   cleanup for IDE and USB drivers for MPC5200
53
54 * Patch by Travis Sawyer, 01 Mar 2004:
55   Ocotea:
56   - Add IBM PPC440GX Ref Platform support (Ocotea)
57     Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
58     Adapted to U-Boot and 440GX port
59   440gx_enet.c:
60   - Add gracious handling of all Ethernet Pin Selections for 440GX
61   - Add RGMII selection for Cicada CIS8201 Gigabit PHY
62   ppc440.h:
63   - Add needed bit definitions
64   - Fix formatting
65
66 * Patch by Carl Riechers, 1 Mar 2004:
67   Add PPC440GX prbdv0 divider to fix memory clock calculation.
68
69 * Patch by Stephan Linz, 27 Feb 2004
70   - avoid problems for targets without NFS download support
71
72 * Patch by Rune Torgersen, 27 Feb 2004:
73   - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
74   - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
75   - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
76
77 * Patch by Masami Komiya, 27 Feb 2004:
78   Fix rarpboot: add autoload by NFS
79
80 * Patch by Dan Eisenhut, 26 Feb 2004:
81   fix flash_write return value in saveenv
82
83 * Patch by Stephan Linz, 11 Dec 2003
84   expand config.mk to avoid trigraph warnings on NIOS
85
86 * Rename "BMS2003" board into "HMI10"
87
88 * SX1 patches: use "serial#" for USB serial #; use redundand environment
89   storage; auto-set console on USB port (using preboot command)
90
91 * Add support for SX1 mobile phone; add support for USB-based console
92   (enable with "setenv stdout usbtty; setenv stdin usbtty")
93
94 * Fix LOWBOOT configuration for MPC5200 with DDR memory
95
96 * Fix SDRAM timings for LITE5200 / IceCube board
97
98 * Handle Auti-MDIX / connection status for INCA-IP
99
100 * Fix USB problems when attempting to read 0 bytes
101
102 * Patch by Travis Sawyer, 26 Feb 2004:
103   Fix broken compile for XPEDITE1K target.
104
105 * Patch by Stephan Linz, 26 Feb 2004:
106   Bug fix for NFS code on NIOS targets
107
108 * Patch by Stephen Williams, 26 Feb 2004:
109   Break up SystemACE reads of large block counts
110
111 * Patch by Pierre Aubert, 26 Feb 2004
112   add IDE support for MPC5200
113
114 * Patch by Masami Komiya, 26 Feb 2004:
115   add autoload via NFS
116
117 * Patch by Stephen Williams
118   Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
119   elsewhere in the source.
120
121 * Patch by Steven Scholz, 25 Feb 2004:
122   - Timeouts in FPGA code should be based on CFG_HZ
123   - Minor cleanup in code for Altera FPGA ACEX1K
124
125 * Patch by Steven Scholz, 25 Feb 2004:
126   Changed "Directory Hierarchy" section in README
127
128 * Patch by Masami Komiya, 25 Feb 2004:
129   Reduce copy count in nfs_read_reply() of NFS code
130
131 * Patch by Markus Pietrek, 24 Feb 2004:
132   NS9750 DevBoard added
133
134 * Patch by Pierre Aubert, 24 Feb 2004
135   add USB support for MPC5200
136
137 * Patch by Steven Scholz, 24 Feb 2004:
138   - fix MII commands to use values from last command
139
140 * Patch by Torsten Demke, 24 Feb 2004:
141   Add support for the eXalion platform (SPSW-8240, F-30, F-300)
142
143 * Patch by Rahul Shanbhag, 19 Feb 2004:
144   Fixes for for OMAP1610 board:
145   - shift some IRQ specific code to platform.S file
146   - remove duplicatewatchdog reset code from start.S
147
148 * Make Auto-MDIX Support configurable on INCA-IP board
149
150 * Fix license for mkimage tool
151
152 * Patch by Masami Komiya, 24 Feb 2004:
153   Update NetBootFileXferSize in NFS code
154
155 * Patch by Scott McNutt, 24 Feb 2004:
156   fix packet length in NFS code
157
158 * Patch by Masami Komiy, 22 Feb 2004:
159   Add support for NFS for file download
160
161 * Patch by Andrea Scian, 17 Feb 2004:
162   Add support for S3C44B0 processor and DAVE B2 board
163
164 * Patch by Steven Scholz, 20 Feb 2004:
165   - Add support for MII commands on AT91RM9200 boards
166   - some cleanup in AT91RM9200 ethernet code
167
168 * Patch by Peter Ryser, 20 Feb 2004:
169   Add support for the Xilinx ML300 platform
170
171 * Patch by Stephan Linz, 17 Feb 2004:
172   Fix watchdog support for NIOS
173
174 * Patch by Josh Fryman, 16 Feb 2004:
175   Fix byte-swapping for cfi_flash.c for different bus widths
176
177 * Patch by Jon Diekema, 14 Jeb 2004:
178   Remove duplicate "FPGA Support" notes from the README file
179
180 * Patches by Reinhard Meyer, 14 Feb 2004:
181   - update board/emk tree; use common flash driver
182   - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
183     [adapted for other PPC CPUs -- wd]
184   - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
185
186 * Patch by Jon Diekema, 13 Feb 2004:
187   Call show_boot_progress() whenever POST "FAILED" is printed.
188
189 * Patch by Nishant Kamat, 13 Feb 2004:
190   Add support for TI OMAP1610 H2 Board
191   Fixes for cpu/arm926ejs/interrupt.c
192         (based on Richard Woodruff's patch for arm925, 16 Oct 03)
193   Fix for a timer bug in OMAP1610 Innovator
194   Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
195
196 * Patches by Stephan Linz, 12 Feb 2004:
197   - add support for NIOS timer with variable period preload counter value
198   - prepare POST framework support for NIOS targets
199
200 * Patch by Denis Peter, 11 Feb 2004:
201   add POST support for the MIP405 board
202
203 * Patch by Laurent Mohin, 10 Feb 2004:
204   Fix buffer overflow in common/usb.c
205
206 * Patch by Tolunay Orkun, 10 Feb 2004:
207   Add support for Cogent CSB272 board
208
209 * Patch by Thomas Elste, 10 Feb 2004:
210   Add support for NET+50 CPU and ModNET50 board
211
212 * Patch by Sam Song, 10 Feb 2004:
213   Fix typos in cfi_flash.c
214
215 * Patch by Leon Kukovec, 10 Feb 2004
216   Fixed long dir entry slot id calculation in get_vfatname
217
218 * Patch by Robin Gilks, 10 Feb 2004:
219   add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
220   !=, <>, <, >, <=, >=)
221
222 * Fix problem with side effects in macros in include/usb.h
223
224 * Patch by David Benson, 13 Nov 2003:
225   bug 841358 - fix TFTP download size limit
226
227 * Fixing bug 850768:
228   improper flush_cache() in load_serial()
229
230 * Fixing bug 834943:
231   MPC8540 - missing volatile declarations
232
233 * Patch by Stephen Williams, 09 Feb 2004:
234   Add support for Xilinx SystemACE chip:
235   - New files common/cmd_ace.c and include/systemace.h
236   - Hook systemace support into cmd_fat and the partition manager
237
238 * Patch by Travis Sawyer, 09 Feb 2004:
239   Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
240
241 * Patch by Travis Sawyer, 09 Feb 2004:
242   o 440GX:
243     - Fix PCI Indirect access for type 1 config cycles with ppc440.
244     - Add phymode for 440 enet
245     - fix pci pre init
246   o XPedite1K:
247     - Change board_pre_init to board_early_init_f
248     - Add user flash to bus controller setup
249     - Fix pci pre init
250     - Fix is_pci_host to check GPIO for monarch bit
251     - Force xpedite1k to pci conventional mode (via #define option)
252
253 * Patch by Brad Kemp, 4 Feb 2004:
254   - handle the machine check that is generated during the PCI scans
255     on 82xx processors.
256   - define the registers used in the IMMR by the PCI subsystem.
257
258 * Patch by Pierre Aubert, 03 Feb 2004:
259   cpu/mpc5xxx/start.S: copy MBAR into SPR311
260
261 * Patch by Jeff Angielski, 03 Feb 2004:
262   Fix copy & paste error in cpu/mpc8260/pci.c
263
264 * Patch by Reinhard Meyer, 24 Jan 2004:
265   Fix typo in cpu/mpc5xxx/pci_mpc5200.c
266
267 * Add Auto-MDIX support for INCA-IP
268
269 * Some code cleanup
270
271 * Patch by Josef Baumgartner, 10 Feb 2004:
272   Fixes for Coldfire port
273
274 * Patch by Brad Kemp, 11 Feb 2004:
275   Fix CFI flash driver problems
276
277 * Make sure to use a bus clock divider of 2 only when running TQM8xxM
278   modules at CPU clock frequencies above 66 MHz.
279
280 * Optimize flash programming speed for LWMON (by another 100% :-)
281
282 * Patch by Jian Zhang, 3 Feb 2004:
283   - Changed the incorrect FAT12BUFSIZE
284   - data_begin in fsdata can be negative. Changed it to be short.
285
286 * Patches by Stephan Linz, 30 Jan 2004:
287   1: - board/altera/common/flash.c:flash_erase():
288        o allow interrupts befor get_timer() call
289        o check-up each erased sector and avoid unexpected timeouts
290      - board/altera/dk1c20/dk1s10.c:board_early_init_f():
291        o enclose sevenseg_set() in cpp condition
292      - remove the ASMI configuration for DK1S10_standard_32 (never present)
293      - fix some typed in mistakes in the NIOS documentation
294   2: - split DK1C20 configuration into several header files:
295        o two new files for each NIOS CPU description
296        o U-Boot related part is remaining in DK1C20.h
297   3: - split DK1S10 configuration into several header files:
298        o two new files for each NIOS CPU description
299        o U-Boot related part is remaining in DK1S10.h
300   4: - Add support for the Microtronix Linux Development Kit
301        NIOS CPU configuration at the Altera Nios Development Kit,
302        Stratix Edition (DK-1S10)
303   5: - Add documentation for the Altera Nios Development Kit,
304        Stratix Edition (DK-1S10)
305   6: - Add support for the Nios Serial Peripharel Interface (SPI)
306        (master only)
307   7: - Add support for the common U-Boot SPI framework at
308        RTC driver DS1306
309
310 * Patch by Rahul Shanbhag, 28 Jan 2004:
311   Fix flash protection/locking handling for OMAP1610 innovator board.
312
313 * Patch by Rolf Peukert, 28 Jan 2004:
314   fix flash write problems on CSB226 board (write with 32 bit bus width)
315
316 * Patches by Mark Jonas, 16 Jan 2004:
317   - fix rounding error when calculating baudrates for MPC5200 PSCs
318   - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
319     time which is not supported
320
321 * Patch by Yuli Barcohen, 26 Jan 2004:
322   Allow bzip2 compression for small memory footprint boards
323
324 * Patch by Brad Kemp, 21 Jan 2004:
325   Add support for CFI flash driver for both the Intel and the AMD
326   command sets.
327
328 * Patch by Travis Sawyer, 20 Jan 2004:
329   Fix pci bridge auto enumeration of sibling p2p bridges.
330
331 * Patch by Tolunay Orkun, 12 Jan 2004:
332   Add some delays as needed for Intel LXT971A PHY support
333
334 * Patches by Stephan Linz, 09 Jan 2004:
335   - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
336   - make DK1C20 board configuration related to ASMI conform to
337     documentation
338
339 * Patch by Anders Larsen, 09 Jan 2004:
340
341   ARM memory layout fixes: the abort-stack is now set up in the
342   correct RAM area, and the BSS is zeroed out as it should be.
343
344   Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
345   of the linker scripts are replaced by '__bss_start' and '_end',
346   resp., which is a further step to eliminate unnecessary differences
347   between the implementation of the CPU architectures.
348
349 * Patch by liang a lei, 9 Jan 2004:
350   Fix Intel 28F128J3 ID in include/flash.h
351
352 * Patch by Masami Komiya, 09 Jan 2004:
353   add support for TB0229 board (NEC VR4131 MIPS processor)
354
355 * Patch by Leon Kukovec, 12 Dec 2003:
356   changed extern __inline__ into static __inline__ in
357   include/linux/byteorder/swab.h
358
359 * Patch by Travis Sawyer, 30 Dec 2003:
360   Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
361   select MDI port based on enabled EMAC device.
362   Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
363   base PrPMC board.
364
365 * Patch by Wolter Kamphuis, 15 Dec 2003:
366   made CONFIG_SILENT_CONSOLE usable on all architectures
367
368 * Disable date command on TQM866M - there is no RTC on MPC866
369
370 * Fix variable CPU clock for MPC859/866 systems for low CPU clocks
371
372 * Implement adaptive SDRAM timing configuration based on actual CPU
373   clock frequency for INCA-IP; fix problem with board hanging when
374   switching from 150MHz to 100MHz
375
376 * Add PCMCIA CS support for BMS2003 board
377
378 * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
379   see doc/README.MPC866 for details;
380   implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
381   calculate CPU clock frequency from PLL register values.
382
383 * Add support for 128 MB RAM on TQM8xxL/M modules
384
385 * Fix PS/2 keyboard problem caused by statically initialized variable
386   pointing to a location in flash
387
388 * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
389
390 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
391   before we can access it; add delay in case we are faster (with no
392   CF card inserted)
393
394 * Cleanup of some init functions
395
396 * Make sure SCC Ethernet is always stopped by the time we boot Linux
397   to avoid Linux crashes by early packets coming in.
398
399 * Accelerate flash accesses on LWMON board by using buffered writes
400
401 * Fix typo in Makefile;
402   fix problem with PARTNUM detection
403
404 * Patch by Reinhard Meyer, 09 Jan 2004:
405   - add RTC support for MPC5200 based boards (requires RTC_XTAL)
406
407 * Add support for IDE LED on BMS2003 board
408   (exclusive with status LED!)
409
410 * Add support for PS/2 keyboard (used with PS/2 multiplexor on
411   BMS2003 board)
412
413 * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
414   Add common files for "emk" boards
415
416 * Add a common get_ram_size() function and modify the the
417   board-specific files to invoke that common implementation.
418
419 ======================================================================
420 Changes for U-Boot 1.0.1:
421 ======================================================================
422
423 * Set default clock for INCA-IP to 150 MHz
424
425 * Make BMS2003 use a separate config file to avoid #ifdef mess;
426   add I2C support; add support for DS1337 RTC
427
428 * Add CompactFlash support  for BMS2003 board
429
430 * Add support for status LED on BMS2003 board
431
432 * Patch by Scott McNutt, 02 Jan 2004:
433   Add support for the Nios Active Serial Memory Interface (ASMI)
434   on Cyclone devices
435
436 * Patch by Andrea Marson, 16 Dec 2003:
437   Add support for the PPChameleon ME and HI modules
438
439 * Patch by Yuli Barcohen, 22 Dec 2003:
440   Add support for Motorola DUET ADS board (MPC87x/88x)
441
442 * Patch by Robert Schwebel, 15 Dec 2003:
443   add support for cramfs (uses JFFS2 command interface)
444
445 * Patches by Stephan Linz, 11 Dec 2003:
446   - more documentation for NIOS port
447   - new struct nios_pio_t, struct nios_spi_t
448   - Reconfiguration for NIOS Development Kit DK1C20:
449     o move board related code from board/dk1c20
450       to board/altera/dk1c20
451     o create a new common source path board/altera/common
452       and move generic flash access stuff into it
453     o change/expand configuration file DK1C20.h
454   - Add support for NIOS Development Kit DK1S10
455   - Add status LED support for NIOS systems
456   - Add dual 7-segment LED support for Altera NIOS DevKits
457
458 * Patch by Ronen Shitrit, 10 Dec 2003:
459   Add support for the Marvell DB64360 / DB64460 development boards
460
461 * Patch by Detlev Zundel, 10 Dec 2003:
462   fix dependency problem in examples/Makefile
463
464 * Patch by Denis Peter, 8 Dec 2003
465   - add support for the PATI board (MPC555)
466   - add SPI support for the MPC5xx
467
468 * Patch by Anders Larsen, 08 Dec 2003:
469   add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
470   to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
471   cleanup some redundand #defines
472
473 * Patch by André Schwarz, 8 Dec 2003:
474   fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
475   - TX and RX deskriptors must be quad-word aligned
476   - does not work with only one TX deskriptor
477   - standard reset method does not work
478
479 * Patch by Masami Komiya, 08 Dec 2003:
480   add RTL8139 ethernet driver
481
482 * Patches by Ed Okerson, 07 Dec 2003:
483   - fix ethernet for the AU1x00 processors in little-endian mode.
484   - extend memsetup.S for the AU1x00 processors in BE and LE modes
485
486 * Minor code cleanup (coding style)
487
488 * Patch by Reinhard Meyer, 30 Dec 2003:
489   - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
490   - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
491   - turned debug print of PHY registers into a function (called in two places)
492   - added support for EMK MPC5200 based modules
493
494 * Fix MPC8xx PLPRCR_MFD_SHIFT typo
495
496 * Add support for TQM866M modules
497
498 * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
499
500 * Fix a few compiler warnings
501
502 * Patch by Reinhard Meyer, 28 Dec 2003:
503   Add initial support for TOP5200 board
504
505 * Make CPU clock on ICA-IP board controllable by a "cpuclk"
506   environment variable which can set to "100", "133", or "150". The
507   CPU clock will be configured accordingly upon next reboot. Other
508   values are ignored. In case of an invalid or undefined "cpuclk"
509   value, the compile-time default CPU clock speed will be used.
510
511 * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
512   window that is used to access the UART registers by the Linux driver)
513
514 * Patch by Reinhard Meyer, 20 Dec 2003:
515   Fix clock calculation for the MPC5200 for higher clock frequencies
516   (above 2**32 / 10 = 429.5 MHz).
517
518 * Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
519
520 * Fix IceCube CLKIN configuration (it's 33.000000MHz)
521
522 * Add new configuration for IceCube board with DDR memory
523
524 * Update TRAB memory configurations
525
526 * Add JFFS2 support for INCA-IP board
527
528 * Patch by Bill Hargen, 09 Dec 2003:
529   - BUBINGA405EP: changed flash driver to protect top sector containing
530     first instruction.
531   - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
532   - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
533   - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
534   - 405EP: added/fixed support for "reginfo" command.
535   - 4xx: removed spurious MII error messages on "mii info" command.
536
537 * Patch by Bernhard Kuhn, 28 Nov 2003:
538   add support for Coldfire CPU
539   add support for Motorola M5272C3 and M5282EVB boards
540
541 * Patch by Pierre Aubert, 24 Nov 2003:
542   - add a return value for the fpga command
543   - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
544     is defined. If ide_preinit fails, ide_init is aborted.
545   - fix an endianess problem in fat.h
546
547 * Patch by Wolter Kamphuis, 05 Dec 2003:
548   Add support for SNMC's QS850/QS823/QS860T boards
549
550 * Patch by Yuli Barcohen, 3 Dec 2003:
551   "revive" U-Boot support for old Motorola MPC860ADS board
552
553 * Patch by Cam(ilo?), 03 Dec 2003:
554   make examples build even with broken Montavista objcopy
555
556 * Patch by Pavel Bartusek, 27 Nov 2003:
557   fix conversion problem with "bootretry" evironment variable
558
559 * Patch by Andre Schwarz, 24 Nov 2003:
560   add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
561
562 * Patch by Pavel Bartusek, 21 Nov 2003:
563   set ZMII bridge speed on 440
564
565 * Patch by Anders Larsen, 17 Nov 2003:
566   Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
567
568 * Patches by David Müller, 14 Nov 2003:
569   - board/mpl/common/common_util.c
570     * implement support for BZIP2 compressed images
571     * various cleanups (printf -> puts, ...)
572   - board/mpl/common/flash.c
573     * report correct errors to upper layers
574     * check the erase fail and VPP low bits in status reg
575   - board/mpl/vcma9/cmd_vcma9.c
576   - board/mpl/vcma9/flash.c
577     * various cleanups (printf -> puts, ...)
578   - common/cmd_usb.c
579     * fix typo in comment
580   - cpu/arm920t/usb_ohci.c
581     * support for S3C2410 is missing in #if line
582   - drivers/cs8900.c
583     * reinit some registers in case of error (cable missing, ...)
584   - fs/fat/fat.c
585     * support for USB/MMC devices is missing in #if line
586   - include/configs/MIP405.h
587   - include/configs/PIP405.h
588     * enable BZIP2 support
589     * enlarge malloc space to 1MiB because of BZIP2 support
590   - include/configs/VCMA9.h
591     * enable BZIP2 support
592     * enlarge malloc space to 1MiB because of BZIP2 support
593     * enable USB support
594   - lib_arm/armlinux.c
595     * change calling convention of ARM Linux kernel as
596       described on http://www.arm.linux.org.uk/developer/booting.php
597
598 * Patch by Thomas Lange, 14 Nov 2003:
599   Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
600   support all these AMD boards.
601
602 * Patch by Thomas Lange, 14 Nov 2003:
603   Workaround for mips au1x00 physical memory accesses (the au1x00
604   uses a 36 bit bus internally and cannot access physical memory
605   directly. Use the uncached SDRAM address instead of the physical
606   one.)
607
608 * Patch by Xue Ligong (Joe), 13 Nov 2003:
609   add Realtek 8019 ethernet driver
610
611 * Patch by Yuli Barcohen, 13 Nov 2003:
612   MPC826xADS/PQ2FADS  cleanup
613
614 * Patch by Anders Larsen, 12 Nov 2003:
615   Update README to mark the PORTIO commands non-standard
616
617 * Patch by Nicolas Lacressonnière, 12 Nov 2003:
618   update for for Atmel AT91RM9200DK development kit:
619   - support for environment variables in DataFlash
620   - Atmel DataFlash AT45DB1282 support
621
622 * Patch by Jeff Carr, 11 Nov 2003:
623   add support for new version of 8270 processors
624
625 * Patches by George G. Davis, 05 Nov 2003:
626   - only pass the ARM linux initrd tag to the kernel when an initrd
627     is actually present
628   - update omap1510inn configuration file
629
630 * Patches by Stephan Linz, 3 Nov 2003:
631   - more endianess fixes for LAN91C111 driver
632   - CFG_HZ configuration patch for NIOS Cyclone board
633
634 * Patch by Stephan Linz, 28 Oct 2003:
635   fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
636
637 * Patch by Steven Scholz, 20 Oct 2003:
638   - make "mii info <addr>" show infor for PHY at "addr" only
639   - Endian fix for miiphy_info()
640
641 * Patch by Gleb Natapov, 19 Sep 2003:
642   Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
643
644 * Patch by Anders Larsen, 17 Sep 2003:
645   Bring ARM memory layout in sync with the documentation:
646   stack and malloc-heap are now located _below_ the U-Boot code
647
648 * Accelerate booting on TRAB board: read and check  autoupdate  image
649   headers first instead of always reading the whole images.
650
651 * Fix type in MPC5XXX code (pointed out by Victor Wren)
652
653 * Enabled password check on RMU board
654
655 * Fix configuration problem with IceCube in LOWBOOT configuration:
656   envrionment got embedded, corrupting the image layout.
657
658 * Fix NEC display names (it's 6440 [for 640x480], not 6640).
659
660 * Added BMS2003 board
661   add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
662
663 * Fix flash driver for TRAB board (must use Unlock Bypass Reset
664   command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
665   and CPLD
666
667 * Use "-fPIC" instead of "-mrelocatable" to prevent problems with
668   recent tools
669
670 * Add checksum verification to 'imls' command
671
672 * Add bd_info fields needed for 4xx Linux I2C driver
673
674 * Patch by Martin Krause, 4 Nov. 2003:
675   Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
676
677 * Print used network interface when CONFIG_NET_MULTI is set
678
679 * Patch by Bernhard Kuhn, 28 Oct 2003:
680   Add low boot support for MPC5200
681
682 * Fix problem with dual PCMCIA support (NSCU)
683
684 * Fix MPC5200 I2C initialization function
685
686 ======================================================================
687 Changes for U-Boot 1.0.0:
688 ======================================================================
689
690 * Fix parameter passing to standalone images with bootm command
691
692 * Patch by Kyle Harris, 30 Oct 2003:
693   Fix build errors for ixdp425 board
694
695 * Patch by David M. Horn, 29 Oct 2003:
696   Fixes to build under CYGWIN
697
698 * Get IceCube MGT5100 working (again)
699
700 * Fix problems in memory test on some boards (which was not
701   non-destructive as intended)
702
703 * Patch by Gary Jennejohn, 28 Oct 2003:
704   Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
705   to prevent stack overflow on ARM systems
706
707 * Patch by Stephan Linz, 28 Oct 2003:
708   fix init sequence error for NIOS port
709
710 * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
711
712 * Add CONFIG_VERSION_VARIABLE to TRAB configuration
713
714 * Patch by Xiao Xianghua, 23 Oct 2003:
715   small patch for mpc85xx
716
717 * Fix small problem in MPC5200 I2C driver
718
719 * Fix FCC3 support on ATC board
720
721 * Correct header printing for multi-image files in do_bootm()
722
723 * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
724
725 * Fix PCI problems on PPChameleon board
726
727 * Patch by Steven Scholz, 18 Oct 2003:
728   Fix AT91RM9200 ethernet driver
729
730 * Patch by Nye Liu, 17 Oct 2003:
731   Fix typo in include/mpc8xx.h
732
733 * Patch by Richard Woodruff, 16 Oct 03:
734   Fixes for cpu/arm925/interrupt.c
735   - Initialize timestamp & lastdec vars.
736   - fix timestamp overflows.
737   - fix lastdec overflow.
738   - smarter normalization to allow udelay() below 1ms to work.
739
740 * Patch by Scott McNutt, 16 Oct
741   add networking support for the Altera Nios Development Kit,
742   Cyclone Edition (DK-1C20)
743
744 * Patch by Jon Diekema, 14 Oct 2003:
745   add hint about doc/README.silent to README file
746
747 * Add CompactFlash support for NSCU
748
749 * Fix PCI problems on PPChameleonEVB
750
751 * TRAB auto-update: Base decision if we have to strip the image
752   header on image type as encoded in the header
753   (include image type patch by Martin Krause, 17 Oct 2003)
754
755 * Patches by Xianghua Xiao, 15 Oct 2003:
756
757   - Added Motorola CPU 8540/8560 support (cpu/85xx)
758   - Added Motorola MPC8540ADS board support (board/mpc8540ads)
759   - Added Motorola MPC8560ADS board support (board/mpc8560ads)
760
761 * Fix flash timings on TRAB board
762
763 * Make sure HUSH is initialized for running auto-update scripts
764
765 * Make 5200 reset command _really_ reset the board, without running
766   any other code after it
767
768 * Fix errors with flash erase when range spans  across banks
769   that are mapped in reverse order
770
771 * Fix flash mapping and display on P3G4 board
772
773 * Patch by Kyle Harris, 15 Jul 2003:
774   - add support for Intel IXP425 CPU
775   - add support for IXDP425 eval board
776
777 * Added config option CONFIG_SILENT_CONSOLE.  See doc/README.silent
778   for more information
779
780 * Patch by Steven Scholz, 10 Oct 2003
781   - Add support for Altera FPGA ACEX1K
782
783 * Patches by Thomas Lange, 09 Oct 2003:
784   - fix cmd_ide.c for non ppc boards (read/write functions did not
785     add ATA base address)
786   - fix for shannon board
787   - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
788   - Endian swap ATA identity for all big endian CPUs, not just PPC
789   - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
790     args to linux
791   - add support for dbau1x00 board (MIPS32)
792
793 * Patch by Sangmoon Kim, 07 Oct 2003:
794   add support for debris board
795
796 * Patch by Martin Krause, 09 Oct 2003:
797   Fixes for TRAB board
798   - /board/trab/rs485.c: correct baudrate
799   - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
800     udelay(); fix some timing problems with adc controller
801   - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
802     modify commands: touch and buzzer
803
804 * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
805   (quick & dirty workaround for rogue pointer problem in get_vfatname());
806   Use direct function calls for auto_update instead of hush commands
807
808 * Patch by Scott McNutt, 04 Oct 2003:
809   - add support for Altera Nios-32 CPU
810   - add support for Nios Cyclone Development Kit (DK-1C20)
811
812 * Patch by Steven Scholz, 29 Sep 2003:
813   - A second parameter for bootm overwrites the load address for
814     "Standalone Application" images.
815   - bootm sets environment variable "filesize" to the resulting
816     (uncompressed) data length for "Standalone Application" images
817     when autostart is set to "no". Now you can do something like
818         if bootm $fpgadata $some_free_ram ; then
819                 fpga load 0 $some_free_ram $filesize
820         fi
821
822 * Patch by Denis Peter, 25 Sept 2003:
823   add support for the MIP405 Rev. C board
824
825 * Patch by Yuli Barcohen, 25 Sep 2003:
826   add support for Zephyr Engineering ZPC.1900 board
827
828 * Patch by Anders Larsen, 23 Sep 2003:
829   add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
830   implemented for the x86 architecture)
831
832 * Patch by Sangmoon Kim, 23 Sep 2003:
833   fix pll_pci_to_mem_multiplier table for MPC8245
834
835 * Patch by Anders Larsen, 22 Sep 2003:
836   enable timed autoboot on PXA
837
838 * Patch by David Müller, 22 Sep 2003:
839   - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
840     returns correct libgcc file path
841   - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
842     time on s3c24x0 systems
843
844 * Patch by Jon Diekema, 19 Sep 2003:
845   - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
846     link state to the fault LED.
847   - In NetLoop, make the Fault LED reflect the link status.  The link
848     status gets updated on entry, and on timeouts.
849
850 * Patch by Anders Larsen, 18 Sep 2003:
851   allow mkimage to build and run on Cygwin-hosted systems
852
853 * Patch by Frank Müller, 18 Sep 2003:
854   use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
855   cpu/mpc8xx/fec.c
856
857 * Patch by Pantelis Antoniou, 16 Sep 2003:
858   add tool to compute fileds in the PLPRCR register for MPC86x
859
860 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
861
862 * Fix build problems under FreeBSD
863
864 * Add generic filesystem image type
865
866 * Make fatload set filesize environment variable
867
868 * enable basic / medium / high-end configurations for PPChameleonEVB
869   board; fix NAND code
870
871 * enable TFTP client code to specify to the server the desired
872   timeout value (see RFC-2349)
873
874 * Improve SDRAM setup for TRAB board
875
876 * Suppress all output with splashscreen configured only if "splashimage"
877   is set
878
879 * Fix problems with I2C support for mpc5200
880
881 * Adapt TRAB configuration and auto_update to new memory layout
882
883 * Add configuration for wtk board
884
885 * Add support for the Sharp LQ065T9DR51U LCD display
886
887 * Patch by Rune Torgersen, 17 Sep 2003:
888   - Fixes for MPC8266 default config
889   - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
890
891 * Patches by Jon Diekema, 17 Sep 2003:
892   - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
893     env_common.c)
894   - sbc8260 tweaks
895   - adjust "help" output
896
897 * Patches by Anders Larsen, 17 Sep 2003:
898   - fix spelling errors
899   - set GD_FLG_DEVINIT flag only after device function pointers
900     are valid
901   - Allow CFG_ALT_MEMTEST on systems where address zero isn't
902     writeable
903   - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
904   - trigger watchdog while waiting in serial driver
905
906 * Add auto-update code for TRAB board using USB memory sticks,
907   support new configuration with more memory
908
909 * disable MPC5200 bus pipelining as workaround for bus contention
910
911 * Modify XLB arbiter priorities on MPC5200 so all devices use same
912   priority; configure critical interrupts to be handled like external
913   interrupts
914
915 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
916   go back to 66 MHz for stability
917
918 * Patches by Jon Diekema, 15 Sep 2003:
919   - add description for missing CFG_CMD_* entries in the README file
920   - sacsng tweaks
921
922 * Patch by Gleb Natapov, 14 Sep 2003:
923   enable watchdog support for all MPC824x boards that have a watchdog
924
925 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
926   "Non-octet Aligned Frame" errors we see at 100 Mbps
927
928 * Patch by Sharad Gupta, 14 Sep 2003:
929   fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
930
931 * Patch by llandre, 11 Sep 2003:
932   update configuration for PPChameleonEVB board
933
934 * Patch by David Müller, 13 Sep 2003:
935   various changes to VCMA9 board specific files
936
937 * Add I2C support for MGT5100 / MPC5200
938
939 * Patch by Rune Torgersen, 11 Sep 2003:
940   Changed default memory option on MPC8266ADS to NOT be Page Based
941   Interleave, since this doesn't work very well with the standard
942   16MB DIMM
943
944 * Patch by George G. Davis, 12 Sep 2003:
945   fix Makefile settings for sk98 driver
946
947 * Patch by Stefan Roese, 12 Sep 2003:
948   - new boards added: DP405, HUB405, PLU405, VOH405
949   - some esd boards updated
950   - cpu/ppc4xx/sdram.c: disable memory controller before setting
951     first values
952   - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
953
954 * Patch by Martin Krause, 11 Sep 2003:
955   add burn-in tests for TRAB board
956
957 * Enable instruction cache on MPC5200 board
958
959 * Patch by Denis Peter, 11 Sep 2003:
960   - fix USB data pointer assignment for bulk only transfer.
961   - prevent to display erased directories in FAT filesystem.
962
963 * Change output format for NAND flash - make it look like for other
964   memory, too
965
966 ======================================================================
967 Changes for U-Boot 0.4.8:
968 ======================================================================
969
970 * Add I2C and RTC support for RMU board
971
972 * Patches by Denis Peter, 9 Sep 2003:
973   add FAT support for IDE, SCSI and USB
974
975 * Patches by Gleb Natapov, 2 Sep 2003:
976   - cleanup of POST code for unsupported architectures
977   - MPC824x locks way0 of data cache for use as initial RAM;
978     this patch unlocks it after relocation to RAM and invalidates
979     the locked entries.
980
981 * Patch by Gleb Natapov, 30 Aug 2003:
982   new I2C driver for mpc107 bridge. Now works from flash.
983
984 * Patch by Dave Ellis, 11 Aug 2003:
985   - JFFS2: fix typo in common/cmd_jffs2.c
986   - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
987   - JFFS2: remove node version 0 warning
988   - JFFS2: accept JFFS2 PADDING nodes
989   - SXNI855T: add AM29LV800 support
990   - SXNI855T: move environment from EEPROM to flash
991   - SXNI855T: boot from JFFS2 in NOR or NAND flash
992
993 * Patch by Bill Hargen, 11 Aug 2003:
994   fixes for I2C on MPC8240
995   - fix i2c_write routine
996   - fix iprobe command
997   - eliminates use of global variables, plus dead code, cleanup.
998
999 * Add support for USB Mass Storage Devices (BBB)
1000   (tested with USB memory sticks only)
1001
1002 * Avoid flicker on TRAB's VFD
1003
1004 * Add support for SK98xx driver
1005
1006 * Add PCI support for SL8245 board
1007
1008 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
1009   or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
1010   Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
1011
1012 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
1013   to allow for more accurate baudrate settings
1014   (error now 0.7% at 115 kbps, instead of 3.5% before)
1015
1016 * Patch by Andreas Mohr, 4 Sep 2003:
1017   Fix a lot of spelling errors
1018
1019 * Add support for PPChameleon Eval Board
1020
1021 * Add support for P3G4 board
1022
1023 * Fix problem with MGT5100 FEC driver: add "early" MAC address
1024   initialization
1025
1026 * Patch by Yuli Barcohen, 7 Aug 2003:
1027   check BCSR to detect if the board is configured in PCI mode
1028
1029 ======================================================================
1030 Changes for U-Boot 0.4.7:
1031 ======================================================================
1032
1033 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
1034   add support for Adder II MPC852T module
1035
1036 * Patch by George G. Davis, 19 Aug 2003:
1037   fix TI Innovator/OMAP1510 pin configs
1038
1039 * Patches by Kshitij, 18 Aug 2003
1040   - add support for arm926ejs cpu core
1041   - add support for TI OMAP 1610 Innovator Board
1042
1043 * Patch by Yuli Barcohen, 14 Aug 2003:
1044   add support for bzip2 uncompression
1045
1046 * Add GCC library to examples/Makefile so GCC utility functions will
1047   be resolved, too
1048
1049 * Add I2C and RTC support for RMU board using software I2C driver
1050   (because of better response to iprobe command); fix problem with
1051   "reset" command
1052
1053 * Patch by Matthias Fuchs, 28 Aug 2003:
1054   Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
1055   CONFIG_BOOTP_MAKS (see README).
1056
1057 * Fix ICU862 environment problem
1058
1059 * Fix RAM size detection for RMU board
1060
1061 * Implement "reset" for MGT5100/MPC5200 systems
1062
1063 ======================================================================
1064 Changes for U-Boot 0.4.6:
1065 ======================================================================
1066
1067 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
1068   allow selection of clock frequency as "make" target
1069
1070 * Implement memory autosizing code for IceCube boards
1071
1072 * Configure network port on INCA-IP for autonegotiation
1073
1074 * Fix overflow problem in network timeout code
1075
1076 * Patch by Richard Woodruff, 8 Aug 2003:
1077   Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
1078
1079 ======================================================================
1080 Changes for U-Boot 0.4.5:
1081 ======================================================================
1082
1083 * Update for TQM board defaults:
1084   disable clocks_in_mhz, enable boot count limit
1085
1086 * Removed tools/gdb from "make all" target.  Added make target "gdbtools"
1087   in toplevel directory instead.  Removed astest.c from tools/gdb because
1088   it is no longer relevant.
1089
1090 * Fix PCI support for MPC5200 / IceCube Board
1091
1092 * Map ISP1362 USB OTG controller for NSCU board
1093
1094 * Patch by Brad Parker, 02 Aug 2003:
1095   fix sc520_cdp problems
1096
1097 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
1098
1099 * Allow erase command to cross flash bank boundaries
1100
1101 * Patch by Scott McNutt, 21 Jul 2003:
1102   Add support for LynuxWorks Kernel Downloadable Images (KDIs).
1103   Both LynxOS and BlueCat linux KDIs are supported.
1104
1105 * Patch by Richard Woodruff, 25 Jul 2003:
1106   use more reliable reset for OMAP/925T
1107
1108 * Patch by Nye Liu, 25 Jul 2003:
1109   fix typo in mpc8xx.h
1110
1111 * Patch by Richard Woodruff, 24 Jul 2003:
1112   Fixes for cmd_nand.c:
1113   - Fixed null dereferece which could result in incorrect ECC values.
1114   - Added support for devices with no Ready/Busy signal hooked up.
1115   - Added OMAP1510 read/write protect handling.
1116   - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
1117     for non-JFFS2.
1118   - Switched default ECC to be JFFS2.
1119
1120 * Allow crc32 to be used at address 0x000
1121
1122 * Provide consistent interface to standalone applications to access
1123   the 'global_data' structure
1124   Provide a doc/README.standalone more useful to users/developers.
1125
1126 * Make IceCube MGT5100 FEC driver work
1127
1128 * Implement new mechanism to export U-Boot's functions to standalone
1129   applications: instead of using (PPC-specific) system calls we now
1130   use a jump table; please see doc/README.standalone for details
1131
1132 * Patch by Dave Westwood, 24 Jul 2003:
1133   added support for Unity OS (a proprietary OS)
1134
1135 * Patch by Detlev Zundel, 23 Jul 2003:
1136   add "imls" command to print flash table of contents
1137
1138 * Fix cold boot detection for log buffer reset
1139
1140 * Return error for invalid length specifiers with "cp.X" etc.
1141
1142 * Fix startup problem on MIPS
1143
1144 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
1145   bitmap support is configured
1146
1147 * Patch by Bill Hargen, 18 Jul 2003:
1148   - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
1149
1150 * Patch by Denis Peter, 18 Jul 2003:
1151   - fix memory configuration for MIP405T
1152   - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
1153
1154 * Cleanup of TQM82xx configurations; use "official" board types
1155   to make selection easier.
1156
1157 * Patch by Martin Krause, 17 Jul 2003:
1158   add delay to get I2C working with "imm" command and s3c24x0_i2c.c
1159
1160 * Patch by Richard Woodruff, 17 July 03:
1161   - Fixed bug in OMAP1510 baud rate divisor settings.
1162
1163 * Patch by Nye Liu, 16 July 2003:
1164   MPC860FADS fixes:
1165   - add MPC86xADS support (uses MPC86xADS.h)
1166   - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
1167     o PLPRCR changes
1168     o BRG changes (EXTAL/XTAL restricted to 10MHz)
1169     o don't trust gclk() software measurement by default, depend on
1170       CONFIG_8xx_GCLK_FREQ
1171   - add DRAM SIMM not installed detection
1172   - use more "correct" SDRAM initialization sequence
1173   - allow different SDRAM sizes (8xxADS has 8M)
1174   - default DER is 0
1175   - remove unused MAMR defines from FADS860T.h (all done in fads.c)
1176   - rename MAMR/MBMR defines to be more consistent. Should eventually
1177     be merged into MxMR to better reflect the PowerQUICC datasheet.
1178
1179 * Patch by Yuli Barcohen, 16 Jul 2003:
1180   support new Motorola PQ2FADS-ZU evaluation board which replaced
1181   MPC8260ADS and MPC8266ADS
1182
1183 ======================================================================
1184 Changes for U-Boot 0.4.4:
1185 ======================================================================
1186
1187 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
1188
1189 * Add support for MGT5100 and MPC5200 processors
1190
1191 * Patch by Lutz Dennig, 15 Jul 2003:
1192   update for R360MPI board
1193
1194 ======================================================================
1195 Changes for U-Boot 0.4.3:
1196 ======================================================================
1197
1198 * Patches by Kshitij, 04 Jul 2003
1199   - added support for arm925t cpu core
1200   - added support for TI OMAP 1510 Innovator Board
1201
1202 * Patches by Martin Krause, 14 Jul 2003:
1203   - add I2C support for s3c2400 systems (trab board)
1204   - (re-) add "ping" to command table
1205
1206 * Fix handling of "slow" POST routines
1207
1208 * Patches by Yuli Barcohen, 13 Jul 2003:
1209   - Correct flash and JFFS2 support for MPC8260ADS
1210   - fix PVR values and clock generation for PowerQUICC II family
1211     (8270/8275/8280)
1212
1213 * Patch by Bernhard Kuhn, 08 Jul 2003:
1214   - add support for M68K targets
1215
1216 * Patch by Ken Chou, 3 Jul:
1217   - Fix PCI config table for A3000
1218   - Fix iobase for natsemi.c
1219     (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
1220
1221 * Allow to enable "slow" POST routines by key press on power-on
1222 * Fix temperature dependend switching of LCD backlight on LWMON
1223 * Tweak output format for LWMON
1224
1225 * Patch by Stefan Roese, 11 Jul 2003:
1226   - Fix bug in CONFIG_VERSION_VARIABLE.
1227   - AR405 config updated.
1228   - OCRTC/ORSG: bsp command added.
1229   - ASH405 bsp update.
1230
1231 ======================================================================
1232 Changes for U-Boot 0.4.2:
1233 ======================================================================
1234
1235 * Add support for NSCU board
1236
1237 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
1238
1239 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
1240   mirror bit flash on TQM8xxM modules
1241
1242 * Patch by Kenneth Johansson, 30 Jun 2003:
1243   get rid of MK_CMD_ENTRY macro; update doc/README.command
1244
1245 * Patch by Seb James, 30 Jun 2003:
1246   Improve documentation of I2C configuration in README
1247
1248 * Fix problems with previous log buffer "fixes"
1249
1250 * Fix minor help text issues
1251
1252 * "log append" did not append a newline
1253
1254 ======================================================================
1255 Changes for U-Boot 0.4.1:
1256 ======================================================================
1257
1258 * Fix some missing commands, cleanup header files
1259   (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
1260
1261 * Rewrite command lookup and help command (fix problems with bubble
1262   sort when sorting command name list). Minor cleanup here and there.
1263
1264 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
1265   - Allow to call sysmon function interactively
1266   - PIC on LWMON board needs delay after power-on
1267   - Add missing RSR definitions for MPC8xx
1268   - Improve log buffer handling: guarantee clean reset after power-on
1269   - Add support for EXBITGEN board (aka "genie")
1270   - Add support for SL8245 board
1271
1272 * Code cleanup:
1273   - remove trailing white space, trailing empty lines, C++ comments, etc.
1274   - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
1275
1276 * Patches by Kenneth Johansson, 25 Jun 2003:
1277   - major rework of command structure
1278     (work done mostly by Michal Cendrowski and Joakim Kristiansen)
1279
1280 ======================================================================
1281 Changes for U-Boot 0.4.0:
1282 ======================================================================
1283
1284 * Patches by Robert Schwebel, 26 Jun 2003:
1285   - csb226 configuration updated
1286   - credits for logodl port updated
1287   - innokom configuration updated
1288   - logodl tree update, still with coding style inconsistencies
1289   - added OCM for ppc405 warning to README
1290
1291 * Patch by Pantelis Antoniou, 25 Jun 2003:
1292   update NetVia with V2 board support
1293
1294 * Header file cleanup for ARM
1295
1296 * Patch by Murray Jensen, 24 Jun 2003:
1297   - make sure to use only U-boot provided header files
1298   - fix problems with ".rodata.str1.4" section as used by GCC-3.x
1299
1300 * Patch by Stefan Roese, 24 Jun 2003:
1301   - Update esd ASH405 board files.
1302   - Update esd DASA_SIM config file.
1303   - Add ping command to some esd boards.
1304
1305 * Patch by Yuli Barcohen, 23 Jun 2003:
1306   Update for MPC8260ADS board
1307
1308 * Patch by Murray Jensen, 23 Jun 2003:
1309   - cleanup of GCC 3.x compiler warnings
1310
1311 * Patch by Rune Torgersen, 4 Jun 2003:
1312   add large memory support for MPC8266ADS board
1313
1314 * Patch by Richard Woodruff, 19 June 03:
1315   - Enabled standard u-boot device abstraction for ARM
1316   - Enabled console device for ARM
1317   - Initilized bi_baudrate for ARM
1318
1319 * Patch by Bill Hargen, 23 Apr 2003:
1320   fix byte order for 824x I2C addresses (write op)
1321
1322 * Patch by Murray Jensen, 20 Jun 2003:
1323   - hymod update
1324   - cleanup (especially for gcc-3.x compilers)
1325
1326 * Patch by Tom Guilliams, 20 Jun 2003:
1327   added CONFIG_750FX support for IBM 750FX processors
1328
1329 * Patch by Devin Crumb, 02 Apr 2003:
1330   Fix clock divider rounding problem in drivers/serial.c
1331
1332 * Patch by Richard Woodruff, 19 June 03:
1333   - Fixed smc91c111 driver to sync with the u-boot environment
1334     (driver/smc91c111.c).
1335   - Added eth_init error return check in NetLoop (net/net.c).
1336
1337 * Patch by Ken Chou, 19 June 2003:
1338   Added support for A3000 SBC board (Artis Microsystems Inc.)
1339
1340 * Patches by Murray Jensen, 17 Jun 2003:
1341   - Hymod board database mods: add "who" field and new xilinx chip types
1342   - provide new "init_cmd_timeout()" function so code external to
1343     "common/main.c" can use the "reset_cmd_timeout()" function before
1344     entering the main loop
1345   - add DTT support for adm1021 (new file dtt/adm1021.c; config
1346     slightly different. see include/configs/hymod.h for an example
1347     (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
1348     CFG_DTT_ADM1021 defined)
1349   - add new "eeprom_probe()" function which has similar args and
1350     behaves in a similar way to "eeprom_read()" etc.
1351   - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
1352     function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
1353   - gdbtools copyright update
1354   - ensure that set_msr() executes the "sync" and "isync" instructions
1355     after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
1356   - 8260 I/O ports fix: Open Drain should be set last when configuring
1357   - add SIU IRQ defines for 8260
1358   - allow LDSCRIPT override and OBJCFLAGS initialization: change to
1359     config.mk to allow board configurations to override the GNU
1360     linker script, selected via the LDSCRIPT, make variable, and to
1361     give an initial value to the OBJCFLAGS make variable
1362   - 8260 i2c enhancement:
1363     o correctly extends the timeout depending on the size of all
1364       queued messages for both transmit and receive
1365     o will not continue with receive if transmit times out
1366     o ensures that the error callback is done for all queued tx
1367       and rx messages
1368     o correctly detects both tx and rx timeouts, only delivers one to
1369       the callback, and does not overwrite an earlier error
1370     o logic in i2c_probe now correct
1371   - add "vprintf()" function so that "panic()" function can be
1372     technically correct
1373   - many Hymod board changes
1374
1375 * Patches by Robert Schwebel, 14 Jun 2003:
1376   - add support for Logotronic DL datalogger board
1377   - cleanup serial line after kermit binary download
1378   - add debugX macro (debug level support)
1379   - update mach-types.h to latest arm.linux.org.uk master list.
1380
1381 * Patches by David Müller, 12 Jun 2003:
1382   - rewrite of the S3C24X0 register definitions stuff
1383   - "driver" for the built-in S3C24X0 RTC
1384
1385 * Patches by Yuli Barcohen, 12 Jun 2003:
1386   - Add MII support and Ethernet PHY initialization for MPC8260ADS board
1387   - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
1388     configuration word supplied by FPGA on some MPC8260ADS boards
1389
1390 * Patch by Pantelis Antoniou, 10 Jun 2003:
1391   Unify status LED interface
1392
1393 * Add support for DS12887 RTC; add RTC support for ATC board
1394
1395 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
1396   Modifications for Atmel AT91RM9200DK ARM920T based development kit
1397   - Add Atmel DataFlash support for reading and writing.
1398   - Add possibility to boot a Linux from DataFlash with BOOTM command.
1399   - Add Flash detection on Atmel AT91RM9200DK
1400     (between Atmel AT49BV1614 and AT49BV1614A flashes)
1401   - Replace old Ethernet PHY layer functions
1402   - Change link address
1403
1404 * Patch by Frank Smith, 9 Jun 2003:
1405   use CRIT_EXCEPTION for machine check on 4xx
1406
1407 * Patch by Detlev Zundel, 13 Jun 2003:
1408   added implementation of the "carinfo" command in cmd_immap.c
1409
1410 * Fix CONFIG_NET_MULTI support in include/net.h
1411
1412 * Patches by Kyle Harris, 13 Mar 2003:
1413   - Add FAT partition support
1414   - Add command support for FAT
1415   - Add command support for MMC
1416   ----
1417   - Add Intel PXA support for video
1418   - Add Intel PXA support for MMC
1419   ----
1420   - Enable MMC and FAT for lubbock board
1421   - Other misc changes for lubbock board
1422
1423 * Patch by Robert Schwebel, April 02, 2003:
1424   fix for SMSC91111 driver
1425
1426 * Patch by Vladimir Gurevich, 04 Jun 2003:
1427   make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
1428
1429 * Patch by Stefan Roese, 05 Jun 2003:
1430   - PPC4xx: Fix bug for initial stack in data cache as pointed out by
1431     Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
1432     data cache can be used even if the chip select is in use.
1433   - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
1434     (see README for further description).
1435   - Changed config files of CONFIG_EEPRO100 boards to use the
1436     CFG_RX_ETH_BUFFER define.
1437
1438 * Add support for RMU board
1439
1440 * Add support for TQM862L at 100/50 MHz
1441
1442 * Patch by Pantelis Antoniou, 02 Jun 2003:
1443   major reconstruction of networking code;
1444   add "ping" support (outgoing only!)
1445
1446 * Patch by Denis Peter, 04 June 2003:
1447   add support for the MIP405T board
1448
1449 * Patches by Udi Finkelstein, 2 June 2003:
1450   - Added support for custom keyboards, initialized by defining a
1451     board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
1452   - Added support for the RBC823 board.
1453   - cpu/mpc8xx/lcd.c now automatically calculates the
1454     Horizontal Pixel Count field.
1455
1456 * Fix alignment problem in BOOTP (dhcp_leasetime option)
1457   [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
1458
1459 * Patch by Mark Rakes, 14 May 2003:
1460   add support for Intel e1000 gig cards.
1461
1462 * Patch by Nye Liu, 3 Jun 2003:
1463   fix critical typo in MAMR definition (include/mpc8xx.h)
1464
1465 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
1466
1467 * Patch by Klaus Heydeck, 2 Jun 2003
1468   Minor changes for KUP4K configuration
1469
1470 * Patch by Marc Singer, 29 May 2003:
1471   Fixed rarp boot method for IA32 and other little-endian CPUs.
1472
1473 * Patch by Marc Singer, 28 May 2003:
1474   Added port I/O commands.
1475
1476 * Patch by Matthew McClintock, 28 May 2003
1477   - cpu/mpc824x/start.S: fix relocation code when booting from RAM
1478   - minor patches for utx8245
1479
1480 * Patch by Daniel Engström, 28 May 2003:
1481   x86 update
1482
1483 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
1484   add nand flash support to SXNI855T configuration
1485   fix/extend nand flash support:
1486   - fix 'nand erase' command so does not erase bad blocks
1487   - fix 'nand write' command so does not write to bad blocks
1488   - fix nand_probe() so handles no flash detected properly
1489   - add doc/README.nand
1490   - add .jffs2 and .oob options to nand read/write
1491   - add 'nand bad' command to list bad blocks
1492   - add 'clean' option to 'nand erase' to write JFFS2 clean markers
1493   - make NAND read/write faster
1494
1495 * Patch by Rune Torgersen, 23 May 2003:
1496   Update for MPC8266ADS board
1497
1498 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
1499   instead CFG_MONITOR_LEN is now only used to determine  _at_compile_
1500   _time_  (!) if the environment is embedded within the U-Boot image,
1501   or in a separate flash sector.
1502
1503 * Cleanup CFG_DER #defines in config files (wd maintained only)
1504
1505 * Fix data abort exception handling for arm920t CPU
1506
1507 * Fix alignment problems with flash driver for TRAB board
1508
1509 * Patch by Donald White, 21 May 2003:
1510   fix calculation of base address in pci_hose_config_device()
1511
1512 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
1513   execute "cmd2", even if "cmd1" fails. Note that this is different
1514   to "run var1 var2" where the contents of "var2" will NOT be
1515   executed when a command in "var1" fails.
1516
1517 * Add zero-copy ramdisk support (requires corresponding kernel support!)
1518
1519 * Patch by Kyle Harris, 20 May 2003:
1520   In preparation for an ixp port, rename cpu/xscale and arch-xscale
1521   into cpu/pxa and arch-pxa.
1522
1523 * Patch by Stefan Roese, 23 May 2003:
1524   - IBM PPC405EP port added.
1525   - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
1526     UART0) is used as default U-Boot console. PPC4xx only!
1527   - esd ASH405 board added (PPC405EP based).
1528   - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
1529   - esd CPCI405AB board added.
1530   - esd PMC405 board added.
1531   - Update of some esd boards.
1532
1533 * Patch by Denis Peter, 19 Mai 2003:
1534   add support for the MIP405-3 board
1535
1536 * Patch by Dave Ellis, 22 May 2003:
1537   Fix problem with only partially cleared .bss segment
1538
1539 * Patch by Rune Torgersen, 12 May 2003:
1540   get PCI to work on a MPC8266ADS board; incorporate change to
1541   cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
1542
1543 * Patch by Nye Liu, 1 May 2003:
1544   minor patches for the FADS8xx
1545
1546 * Patch by Thomas Schäfer, 28 Apr 2003:
1547   Fix SPD handling for 256 ECC DIMM on Walnut
1548
1549 * Add support for arbitrary bitmaps for TRAB's  VFD command;
1550   allow to pass boot bitmap addresses in environment variables;
1551   allow for zero boot delay
1552
1553 * Patch by Christian Geißinger, 19 May 2002:
1554   On TRAB: wait until the dummy byte has been completely sent
1555
1556 * Patch by David Updegraff, 22 Apr 2003:
1557   update for CrayL1 board
1558
1559 * Patch by Pantelis Antoniou, 21 Apr 2003:
1560   add boot support for ARTOS (a proprietary OS)
1561
1562 * Patch by Steven Scholz, 11 Apr 2003:
1563   Add support for RTC DS1338
1564
1565 * Patch by Rod Boyce, 24 Jan 2003:
1566   Fix counting of extended partitions in diskboot command
1567
1568 * Patch by Christophe Lindheimer, 20 May 2003:
1569   allow the use of CFG_LOADS when CFG_NO_FLASH is set
1570
1571 * Fix SDRAM timing on Purple board
1572
1573 * Add support for CompactFlash on ATC board
1574   (includes support for Intel 82365 and compatible PC Card controllers,
1575   and Yenta-compatible PCI-to-CardBus controllers)
1576
1577 * Patch by Mathijs Haarman, 08 May 2003:
1578   Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
1579
1580 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
1581
1582 * Add support for Promess ATC board
1583
1584 * Patch by Keith Outwater, 28 Apr 2003:
1585   - Miscellaneous corrections and additions to GEN860T board specific code.
1586   - Added GEN860_SC variant to GEN860T.
1587   - Miscellaneous corrections to GEN860T documentation.
1588   - Correct duplicate entry in U-Boot CREDITS file.
1589   - Add GEN860T_SC entry in MAINTAINERS file.
1590   - Update CREDITS file with GEN860T_SC info.
1591
1592 * Update Smiths Aerospace addresses in MAINTAINERS file
1593
1594 * Fix error handling in hush's version of "run" command
1595
1596 * LWMON extensions:
1597   - Splashscreen support
1598   - modem support
1599   - sysmon support
1600   - temperature dependend enabling of LCD
1601
1602 * Allow booting from old "PPCBoot" disk partitions
1603
1604 * Add support for TQM8255 Board / MPC8255 CPU
1605
1606 ======================================================================
1607 Changes for U-Boot 0.3.1:
1608 ======================================================================
1609
1610 * Make sure Block Lock Bits get cleared in R360MPI flash driver
1611
1612 * MPC823 LCD driver: Fill color map backwards, to allow for steady
1613   display when Linux takes over
1614
1615 * Patch by Erwin Rol, 27 Feb 2003:
1616   Add support for RTEMS (this time for real).
1617
1618 * Add support for "bmp info" and "bmp display" commands to load
1619   bitmap images; this can be used (for example in a "preboot"
1620   command) to display a splash screen very quickly after poweron.
1621
1622 * Add support for 133 MHz clock on INCA-IP board
1623
1624 * Patch by Lutz Dennig, 10 Apr 2003:
1625   Update for R360MPI board
1626
1627 * Add new meaning to "autostart" environment variable:
1628   If set to "no", a standalone image passed to the
1629   "bootm" command will be copied to the load address
1630   (and eventually uncompressed), but NOT be started.
1631   This can be used to load and uncompress arbitrary
1632   data.
1633
1634 * Patch by Stefan Roese, 10 Apr 2003:
1635   Changed DHCP client to use IP address from server option field #54
1636   from the OFFER packet in the server option field #54 in the REQUEST
1637   packet. This fixes a problem using a Windows 2000 DHCP server,
1638   where the DHCP-server is not the TFTP-server.
1639
1640 * Set max brightness for MN11236 displays on TRAB board
1641
1642 * Add support for TQM862L modules
1643
1644 ======================================================================
1645 Changes for U-Boot 0.3.0:
1646 ======================================================================
1647
1648 * Patch by Arun Dharankar, 4 Apr 2003:
1649   Add IDMA example code (tested on 8260 only)
1650
1651 * Add support for Purple Board (MIPS64 5Kc)
1652
1653 * Add support for MIPS64 5Kc CPUs
1654
1655 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
1656
1657 * Patch by Denis Peter, 04 Apr 2003:
1658   - update MIP405-4 board
1659
1660 * Patch by Stefan Roese, 4 Apr 2003:
1661   - U-Boot version environment variable "ver" added
1662     (CONFIG_VERSION_VARIABLE).
1663   - Changed PPC405GPr version from A to B.
1664   - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
1665
1666 * Patches by Denis Peter, 03 April 2003:
1667   - fix PCI IRQs on MPL boards
1668   - fix two more un-relocated pointer problems
1669
1670 * Fix behaviour of "run" command:
1671   - print error message iv variable does not exist
1672   - terminate processing of arguments in case of error
1673
1674 * Patches by Peter Figuli, 10 Mar 2003
1675   - Add support for BTUART on PXA platform
1676   - Add support for WEP EP250 (PXA) board
1677
1678 * Fix flash problems on INCA-IP; add tool to allow bruning images  to
1679   flash using a BDI2000
1680
1681 * Implement fix for I2C Edge Conditions problem for all boards that
1682   use the bit-banging driver (common/soft_i2c.c)
1683
1684 * Patch by Martin Winistoerfer, 23 Mar 2003
1685   - Add port to MPC555/556 microcontrollers
1686   - Add support for cmi customer board with
1687     Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
1688
1689 * Patch by Rick Bronson, 28 Mar 2003:
1690   - fix common/cmd_nand.c
1691
1692 * Patch by Arun Dharankar, 24 Mar 2003:
1693   - add threads / scheduler example code
1694
1695 * Add patches by Robert Schwebel, 31 Mar 2003:
1696   - add ctrl-c support for kermit download
1697   - align bdinfo output on ARM
1698   - csb226 board: bring in sync with innokom/memsetup.S
1699   - csb226 board: fix MDREFR handling
1700   - misc doc fixes / extensions
1701   - innokom board: cleanup, MDREFR fix in memsetup.S, config update
1702   - add BOOT_PROGRESS to armlinux.c
1703
1704 * Add CPU ID, version, and clock speed for INCA-IP
1705
1706 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
1707   - fix SRAM and SDRAM memory sizing
1708   - add status LED support
1709   - add MAC address for second (SCC1) ethernet port
1710
1711 * Update default environment for TQM8260 board
1712
1713 * Patch by Rick Bronson, 16 Mar 2003:
1714   - Add NAND flash support for reading, writing, and erasing NAND
1715     flash (certain forms of which are called SmartMedia).
1716   - Add support for Atmel AT91RM9200DK ARM920T based development kit.
1717
1718 * Patches by Robert Schwebel, 19 Mar 2003:
1719   - use arm-linux-gcc as default compiler for ARM
1720   - fix i2c fixup code
1721   - fix missing baudrate setting
1722   - added $loadaddr / CFG_LOAD_ADDR support to loadb
1723   - moved "ignoring trailing characters" _before_ u-boot wants to
1724     print out diagnostics messages; removes bogus characters at the
1725     end of transmission
1726
1727 * Patch by John Zhan, 18 Mar 2003:
1728   Add support for SinoVee Microsystems SC8xx boards
1729
1730 * Patch by Rolf Offermanns, 21 Mar 2003:
1731   ported the dnp1110 related changes from the current armboot cvs to
1732   current u-boot cvs. smc91111 does not work. problem marked in
1733   smc91111.c, grep for "FIXME".
1734
1735 * Patch by Brian Auld, 25 Mar 2003:
1736   Add support for STM flash chips on ebony board
1737
1738 * Add PCI support for MPC8250 Boards (PM825 module)
1739
1740 * Patch by Stefan Roese, 25 Mar 2003:
1741   - PCI405 update.
1742
1743 * Patch by Stefan Roese, 20 Mar 2003:
1744   - CPCI4052 update (support for revision 3).
1745   - Set edge conditioning circuitry on PPC405GPr for compatibility
1746     to existing PPC405GP designs.
1747   - Clip udiv to 5 bits on PPC405 (serial.c).
1748
1749 * Extend INCAIP board support:
1750   - add automatic RAM size detection
1751   - add "bdinfo" command
1752   - pass flash address and size to Linux kernel
1753   - switch to 150 MHz clock
1754
1755 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
1756   the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
1757   boards, version 153 for Rev. 200 boards).
1758
1759 * Patch by Vladimir Gurevich, 12 Mar 2003:
1760   Fix relocation problem of statically initialized string pointers
1761   in common/cmd_pci.c
1762
1763 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
1764   Cleanup & bug fixes for JFFS2 code:
1765   - the memory mangement was broken. It caused havoc on malloc by
1766     writing beyond the block boundaries.
1767   - the length calculation for files was wrong, sometimes resulting
1768     in short file reads.
1769   - data copying now optionally takes fragment version numbers into
1770     account, to avoid copying from older data.
1771   See doc/README.JFFS2 for details.
1772
1773 * Patch by Josef Wagner, 12 Mar 2003:
1774   - 16/32 MB and 50/80 MHz support with auto-detection for IP860
1775   - ETH05 and BEDBUG support for CU824
1776   - added support for MicroSys CPC45
1777   - new BOOTROM/FLASH0 and DOC base for PM826
1778
1779 * Patch by Robert Schwebel, 12 Mar 2003:
1780   Fix the chpart command on innokom board
1781
1782 * Name cleanup:
1783   mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
1784   s/PPCBoot/U-Boot/ in some files
1785   s/pImage/uImage/  in some files
1786
1787 * Patch by Detlev Zundel, 15 Jan 2003:
1788   Fix '' command line quoting
1789
1790 * Patch by The LEOX team, 19 Jan 2003:
1791   - add support for the ELPT860 board
1792   - add support for Dallas ds164x RTC
1793
1794 * Patches by David Müller, 31 Jan 2003:
1795   - minimal setup for CardBus bridges
1796   - add EEPROM read/write support in the CS8900 driver
1797   - add support for the builtin I2C controller in the Samsung s3c24x0 chips
1798   - add support for MPL's VCMA9 (Samsung s3c2410 based) board
1799
1800 * Patch by Steven Scholz, 04 Feb 2003:
1801   add support for RTC DS1307
1802
1803 * Patch by Reinhard Meyer, 5 Feb 2003:
1804   fix PLPRCR/SCCR init sequence on 8xx to allow for
1805   changes of EBDF by software
1806
1807 * Patch by Vladimir Gurevich, 07 Feb 2003:
1808   "API-compatibility patch" for 4xx I2C driver
1809
1810 * TRAB fixes / extensions:
1811   - Restore VFD brightness as saved in environment
1812   - add support for Fujitsu flashes
1813   - make sure both buzzers are turned off (drive low level)
1814
1815 * Patches by Robert Schwebel, 06 Mar 2003:
1816   - fix bug in BOOTP code (must use NetCopyIP)
1817   - update of CSB226 port
1818   - clear BSS segment on XScale
1819   - added support for i2c_init_board() function
1820   - update to the Innokom plattform
1821
1822 * Extend support for redundand environments for configurations where
1823   environment size < sector size
1824
1825 * Patch by Rune Torgersen, 13 Feb 2003:
1826   Add support for Motorola MPC8266ADS board
1827
1828 * Patch by Kyle Harris, 19 Feb 2003:
1829   patches for the Intel lubbock board:
1830   memsetup.S - general cleanup (based on Robert's csb226 code)
1831   flash.c - overhaul, actually works now
1832   lubbock.c - fix init funcs to return proper value
1833
1834 * Patch by Kenneth Johansson, 26 Feb 2003:
1835   - Fixed off by one in RFTA calculation.
1836   - No need to abort when LDF is lower than we can program it's only
1837     minimum timing so clamp it to what we can do.
1838   - Takes function pointer to function for reading the spd_nvram. Usefull
1839     for faking data or hardcode a module without the nvram.
1840   - fix other user for above change
1841   - fix some comments.
1842
1843 * Patches by Brian Waite, 26 Feb 2003:
1844   - fix port for evb64260 board
1845   - fix PCI for evb64260 board
1846   - fix PCI scan
1847
1848 * Patch by Reinhard Meyer, 1 Mar 2003:
1849   Add support for EMK TOP860 Module
1850
1851 * Patch by Yuli Barcohen, 02 Mar 2003:
1852   Add SPD EEPROM support for MPC8260ADS board
1853
1854 * Patch by Robert Schwebel, 21 Jan 2003:
1855   - Add support for Innokom board
1856   - Don't complain if "install" fails
1857   - README cleanup (remove duplicated lines)
1858   - Update PXA header files
1859
1860 * Add documentation for existing POST code (doc/README.POST)
1861
1862 * Patch by Laudney Ren, 15 Jan 2003:
1863   Fix handling of redundand environment in "tools/envcrc.c"
1864
1865 * Patch by Detlev Zundel, 28 Feb 2003:
1866   Add bedbug support for 824x systems
1867
1868 * Add support for 16 MB flash configuration of TRAB board
1869
1870 * Patch by Erwin Rol, 27 Feb 2003:
1871   Add support for RTEMS
1872
1873 * Add image information to README
1874
1875 * Patch by Stefan Roese, 18 Feb 2003:
1876   CPCIISER4 configuration updated.
1877
1878 * Patch by Stefan Roese, 17 Feb 2003:
1879   Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
1880
1881 * Patch by Stefan Roese, 13 Feb 2003:
1882   Add "pcidelay" environment variable (in ms, enabled via
1883   CONFIG_PCI_BOOTDELAY).
1884   PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
1885   RST# to respond to configuration cycles (33MHz -> 1s).
1886
1887 * Fix dual PCMCIA slot support (when running with just one
1888   slot populated)
1889
1890 * Add VFD type detection to trab board
1891
1892 * extend drivers/cs8900.c driver to synchronize  ethaddr  environment
1893   variable with value in the EEPROM
1894
1895 * Patch by Stefan Roese, 10 Feb 2003:
1896   Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
1897
1898 * Add support for MIPS32 4Kc CPUs
1899
1900 * Add support for INCA-IP Board
1901
1902 ======================================================================
1903 Changes for U-Boot 0.2.2:
1904 ======================================================================
1905
1906 * Add dual ethernet support on PM826
1907
1908 * Add support for LXT971 PHY on PM826
1909
1910 * Patch by Tord Andersson, 16 Jan 2003:
1911   Fix flash sector count for TQM8xxL
1912
1913 * Fix I2C EEPROM problem on ICU862 board (would only write the first
1914   16 bytes out of each 32 byte block)
1915
1916 ======================================================================
1917 Changes for U-Boot 0.2.1:
1918 ======================================================================
1919
1920 * Add support for V37 board
1921   (patch by Jón Benediktsson, 11 Dec 2002)
1922
1923 * Update baudrate in bd_info when it gets changed
1924
1925 * Add watchdog trigger points while waiting for serial port
1926   (so far only 8xx -- needed on LWMON with 100ms watchdog)
1927
1928 * Improve command line tool to access the U-Boot's environment
1929   (figuration of the utility, using a config file)
1930
1931 * Add single quote support for (old) command line parser
1932
1933 * Switch LWMON board default config from FRAM to EEPROM;
1934   in POST, EEPROM shows up on 8 addresses
1935
1936 ======================================================================
1937 Changes for U-Boot 0.2.0:
1938 ======================================================================
1939
1940 * Use 1-byte-read instead of -write for iprobe() function
1941   Add i2c commands to PM826 config
1942
1943 * extend I2C POST code: check for list on known addresses
1944
1945 * Improve log buffer code; use "loglevel" to decide which messages
1946   to log on the console, too (like in Linux); get rid of "logstart"
1947
1948 * Add command line tool to access the U-Boot's environment
1949   (board-specific for TRAB now, to be fixed later)
1950
1951 * Patch by Hans-Joerg Frieden, 06 Dec 2002
1952   Fix misc problems with AmigaOne support
1953
1954 * Patch by Chris Hallinan, 3 Dec 2002:
1955   minor cleanup to the MPC8245 EPIC driver
1956
1957 * Patch by Pierre Aubert , 28 Nov 2002
1958   Add support for external (SIU) interrupts on MPC8xx
1959
1960 * Patch by Pierre Aubert , 28 Nov 2002
1961   Fix nested syscalls bug in standalone applications
1962
1963 * Patch by David Müller, 27 Nov 2002:
1964   fix output of "pciinfo" command for CardBus bridge devices.
1965
1966 * Fix bug in TQM8260 board detection - boards got stuck when board ID
1967   was not readable
1968
1969 * Add LED indication for IDE activity on KUP4K board
1970
1971 * Fix startup problems with VFD display on TRAB
1972
1973 * Patch by Pierre Aubert, 20 Nov 2002
1974   Add driver for Epson SED13806 graphic controller.
1975   Add support for BMP logos in cfb_console driver.
1976
1977 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
1978
1979 * Patch by Rod Boyce, 21 Nov 2002:
1980   fix PCMCIA on MBX8xx board
1981
1982 * Patch by Pierre Aubert , 21 Nov 2002
1983   Add CFG_CPM_POST_WORD_ADDR to make the offset of the
1984   bootmode word in DPRAM configurable
1985
1986 * Patch by Daniel Engström, 18 Nov 2002:
1987   Fixes for x86 port (mostly strings issues)
1988
1989 * Patch by Ken Chou, 18 Nov 2002:
1990   Fix for natsemi NIC cards (DP83815)
1991
1992 * Patch by Pierre Aubert, 19 Nov 2002:
1993   fix a bug for the MII configuration, and some warnings
1994
1995 * Patch by Thomas Frieden, 13 Nov 2002:
1996   Add code for AmigaOne board
1997   (preliminary merge to U-Boot, still WIP)
1998
1999 * Patch by Jon Diekema, 12 Nov 2002:
2000   - Adding URL for IEEE OUI lookup
2001   - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
2002     being defined.
2003   - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
2004     root-on-nfs macros are designed to switch how the default boot
2005     method gets defined.
2006
2007 * Patch by Daniel Engström, 13 Nov 2002:
2008   Add support for i386 architecture and AMD SC520 board
2009
2010 * Patch by Pierre Aubert, 12 Nov 2002:
2011   Add support for DOS filesystem and booting from DOS floppy disk
2012
2013 * Patch by Jim Sandoz, 07 Nov 2002:
2014   Increase number of network RX buffers (PKTBUFSRX in
2015   "include/net.h") for EEPRO100 based boards (especially SP8240)
2016   which showed "Receiver is not ready" errors when U-Boot was
2017   processing the receive buffers slower than the network controller
2018   was filling them.
2019
2020 * Patch by Andreas Oberritter, 09 Nov 2002:
2021   Change behaviour of NetLoop(): return -1 for errors, filesize
2022   otherwise; return code 0 is valid an means no file loaded - in this
2023   case the environment still gets updated!
2024
2025 * Patches by Jon Diekema, 9 Nov 2002:
2026   - improve ADC/DAC clocking on the SACSng board to align
2027     the failing edges of LRCLK and SCLK
2028   - sbc8260 configuration tweaks
2029   - add status LED support for 82xx systems
2030   - wire sspi/sspo commands into command handler; improved error
2031     handlering
2032   - add timestamp support and alternate memory test to the
2033     SACSng configuration
2034
2035 * Patch by Vince Husovsky, 7 Nov 2002:
2036   Add "-n" to linker options to get rid of "Not enough room for
2037   program headers" problem
2038
2039 * Patch by David Müller, 05 Nov 2002
2040   Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
2041   so we can use an already existing name
2042
2043 * Patch by Pierre Aubert, 05 Nov 2002
2044   Hardware relatied improvments in FDC boot code
2045
2046 * Patch by Holger Schurig, 5 Nov 2002:
2047   Make the PXA really change it's frequency
2048
2049 * Patch by Pierre Aubert, 05 Nov 2002
2050   Add support for slave serial Spartan 2 FPGAs
2051
2052 * Fix uninitialized memory (MAC  address)  in  8xx  SCC/FEC  ethernet
2053   drivers
2054
2055 * Add support for log buffer which can be passed to Linux kernel's
2056   syslog mechanism; used especially for POST results.
2057
2058 * Patch by Klaus Heydeck, 31 Oct 2002:
2059   Add initial support for kup4k board
2060
2061 * Patch by Robert Schwebel, 04 Nov 2002:
2062   - use watchdog to reset PXA250 systems
2063   - added progress callbacks to (some of the) ARM code
2064   - update for Cogent CSB226 board
2065
2066 * Add support for FPS860 board
2067
2068 * Patch by Guillaume Alexandre,, 04 Nov 2002:
2069   Improve PCI access on 32-bits Compact PCI bus
2070
2071 * Fix mdelay() on TRAB - this was still the debugging version with
2072   seconds instead of ms.
2073
2074 * Patch by Robert Schwebel, 1 Nov 2002:
2075   XScale related cleanup (affects all ARM boards)
2076
2077 * Cleanup of names and README.
2078
2079 ======================================================================
2080 Notes for U-Boot 0.1.0:
2081 ======================================================================
2082
2083 This is the initial version of "Das U-Boot", the Universal Boot Loader.
2084
2085 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
2086 For information about the history of the project please see the
2087 PPCBoot project page at http://sourceforge.net/projects/ppcboot
2088
2089 ======================================================================