1 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
2 Author: Grant Likely <grant.likely@secretlab.ca>
3 Date: Wed Nov 29 16:23:42 2006 +0100
5 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
7 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
10 This patch depends on the previous patches for MPC52xx device tree support
12 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
15 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
16 Author: Stefan Roese <sr@denx.de>
17 Date: Wed Nov 29 15:42:37 2006 +0100
19 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
21 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
22 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
23 quite similar and share the same board directory "prodrive/p3mx"
24 and the same config file "p3mx.h".
26 Signed-off-by: Stefan Roese <sr@denx.de>
28 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
29 Author: Stefan Roese <sr@denx.de>
30 Date: Wed Nov 29 12:53:15 2006 +0100
32 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
34 In the bootvx command the load address was only read from the env
35 variable "loadaddr" and not optionally passed as paramter as described
36 in the help. This is fixed with this patch. The behaviour is now the
37 same as in the bootelf command.
39 Signed-off-by: Stefan Roese <sr@denx.de>
41 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
42 Author: Stefan Roese <sr@denx.de>
43 Date: Wed Nov 29 12:03:57 2006 +0100
45 [PATCH] include/ppc440.h minor error affecting interrupts
47 Fixed include/ppc440.c for UIC address Bug
49 Corrects bug affecting the addresses for the universal interrupt
50 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
52 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
53 Signed-off-by: Stefan Roese <sr@denx.de>
55 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
56 Author: Stefan Roese <sr@denx.de>
57 Date: Tue Nov 28 17:55:49 2006 +0100
59 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
61 This patch adds the code and configuration necessary to boot with an
62 arch/powerpc Linux kernel.
64 Signed-off-by: Grant Likely <grant.likely@gmail.com>
65 Acked-by: Jon Loeliger <jdl@freescale.com>
67 commit e732faec95a83cb468b4850ae807c8301dde8f6a
68 Author: Stefan Roese <sr@denx.de>
69 Date: Tue Nov 28 16:09:24 2006 +0100
71 [PATCH] PPC4xx: 440SP Rev. C detection added
73 Signed-off-by: Stefan Roese <sr@denx.de>
75 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
76 Author: Stefan Roese <sr@denx.de>
77 Date: Tue Nov 28 11:04:45 2006 +0100
79 [PATCH] nand: Fix patch merge problem
81 Signed-off-by: Stefan Roese <sr@denx.de>
83 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
84 Author: Wolfgang Denk <wd@pollux.denx.de>
85 Date: Mon Nov 27 22:53:53 2006 +0100
89 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
90 Author: Stefan Roese <sr@denx.de>
91 Date: Mon Nov 27 17:43:25 2006 +0100
93 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
95 Patch below corrects the setting of the zmiifer register, it was
96 overwritting the register rather than ORing the settings.
98 Signed-off-by: Neil Wilson <NWilson@airspan.com>
99 Signed-off-by: Stefan Roese <sr@denx.de>
101 commit d1a72545296800b7e219f93104ad5836f0003d66
102 Author: Stefan Roese <sr@denx.de>
103 Date: Mon Nov 27 17:34:10 2006 +0100
105 [PATCH] Select NAND embedded environment from board configuration
107 The current NAND Bootloader setup forces the environment
108 variables to be in line with the bootloader. This change
109 enables the configuration to be made in the board include
110 file instead so that it can be individually enabled.
112 Signed-off-by: Nick Spence <nick.spence@freescale.com>
113 Signed-off-by: Stefan Roese <sr@denx.de>
115 commit 15784862857c3c2214498defcfed84ff137fb81e
116 Author: Stefan Roese <sr@denx.de>
117 Date: Mon Nov 27 17:22:19 2006 +0100
119 [PATCH] nand_wait() timeout fixes
121 Two fixes for the nand_wait() function in
122 drivers/nand/nand_base.c:
124 1. Use correct timeouts. The original timeouts in Linux
125 source are 400ms and 20ms not 40s and 20s
127 2. Return correct error value in case of timeout. 0 is
130 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
131 Signed-off-by: Stefan Roese <sr@denx.de>
133 commit da5553b095bf04f4f109ad7e565dae3aba47b230
134 Author: Stefan Roese <sr@denx.de>
135 Date: Mon Nov 27 17:04:06 2006 +0100
137 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
139 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
140 arguments to bootm. It removes the getenv("disable_of") test that used
141 to be used for this purpose.
143 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
144 Acked-by: Jon Loeliger <jdl@freescale.com>
146 commit a9398e018593782c5fa7d0741955fc1256b34c1e
147 Author: Wolfgang Denk <wd@pollux.denx.de>
148 Date: Mon Nov 27 15:32:42 2006 +0100
150 Minor code cleanup. Update CHANGELOG.
152 commit 1729b92cde575476684bffe819d0b7791b57bff2
153 Author: Stefan Roese <sr@denx.de>
154 Date: Mon Nov 27 14:52:04 2006 +0100
156 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
158 Signed-off-by: Stefan Roese <sr@denx.de>
160 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
161 Author: Stefan Roese <sr@denx.de>
162 Date: Mon Nov 27 14:49:51 2006 +0100
164 [PATCH] alpr: remove unused board specific flash driver
166 Signed-off-by: Stefan Roese <sr@denx.de>
168 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
169 Author: Stefan Roese <sr@denx.de>
170 Date: Mon Nov 27 14:48:41 2006 +0100
172 [PATCH] 4xx: Fix problem with board specific reset code
174 Signed-off-by: Stefan Roese <sr@denx.de>
176 commit ec0c2ec725aec9524a177a77ce75559e644a931a
177 Author: Stefan Roese <sr@denx.de>
178 Date: Mon Nov 27 14:46:06 2006 +0100
180 [PATCH] Remove testing 4xx enet PHY setup
182 Signed-off-by: Stefan Roese <sr@denx.de>
184 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
185 Author: Stefan Roese <sr@denx.de>
186 Date: Mon Nov 27 14:12:17 2006 +0100
188 [PATCH] Update Prodrive ALPR board support (440GX)
190 Signed-off-by: Stefan Roese <sr@denx.de>
192 commit 78d620ebb5871d252270dedfad60c6568993b780
193 Author: Wolfgang Denk <wd@atlas.denx.de>
194 Date: Thu Nov 23 22:58:58 2006 +0100
196 Updates for TQM5200 modules:
197 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
198 - simplify "udate" definitions
200 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
201 Author: Stefan Roese <sr@denx.de>
202 Date: Wed Nov 22 13:20:50 2006 +0100
204 [PATCH] PPC4xx start.S: Fix for processor errata
206 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
207 errata 1.12: 440_33 by moving patch up in code.
209 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
210 Signed-off-by: Stefan Roese <sr@denx.de>
212 commit 4ef6251403f637841000e0fef9e832aa01339822
213 Author: Stefan Roese <sr@denx.de>
214 Date: Mon Nov 20 20:39:52 2006 +0100
216 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
218 Signed-off-by: Stefan Roese <sr@denx.de>
220 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
221 Author: Wolfgang Denk <wd@pollux.denx.de>
222 Date: Mon Nov 20 10:28:30 2006 +0100
226 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
227 Author: Stefan Roese <sr@denx.de>
228 Date: Mon Nov 13 13:55:24 2006 +0100
230 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
232 * Adds support for AMD command set Top Boot flash geometry reversal
233 * Adds support for reading JEDEC Manufacturer ID and Device ID
234 * Adds support for displaying command set, manufacturer id and
236 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
237 * Removes outdated change history (refer to git log instead)
239 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
240 Signed-off-by: Stefan Roese <sr@denx.de>
242 commit b21b511d4c50408f4853f46f06b601272196223f
243 Author: Wolfgang Denk <wd@pollux.denx.de>
244 Date: Sun Nov 12 21:13:23 2006 +0100
248 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
249 Author: Bartlomiej Sieka <tur@semihalf.com>
250 Date: Sat Nov 11 22:48:22 2006 +0100
252 Disable the watchdog in the default config for the V38B board.
254 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
255 Author: Bartlomiej Sieka <tur@semihalf.com>
256 Date: Sat Nov 11 22:43:00 2006 +0100
258 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
259 group is enabled for USB earlier (in cpu_init_f() instead of
260 usb_lowlevel_init()).
262 commit 91650b3e4de688038d4f71279c44858e3e2c6870
263 Author: Wolfgang Denk <wd@pollux.denx.de>
264 Date: Mon Nov 6 17:06:36 2006 +0100
266 Sequential accesses to non-existent memory must be synchronized,
267 at least on G2 cores.
269 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
271 commit c59200443072353044aa4bf737a5a60f9a9af231
272 Author: Wolfgang Denk <wd@pollux.denx.de>
273 Date: Thu Nov 2 15:15:01 2006 +0100
277 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
278 Author: Bartlomiej Sieka <tur@semihalf.com>
279 Date: Wed Nov 1 02:04:38 2006 +0100
281 Finish up support for MarelV38B board
282 - add watchdog support
283 - enable GPIO_WKUP_7 pin for input
286 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
287 Author: Bartlomiej Sieka <tur@semihalf.com>
288 Date: Wed Nov 1 01:45:46 2006 +0100
290 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
291 * remove warnings when compiling ethaddr.c
292 * adjust linker script (fixes a crash resulting from incorrect
293 definition of __u_boot_cmd_start)
294 - Some MarelV38B code cleanup.
296 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
297 Author: Bartlomiej Sieka <tur@semihalf.com>
298 Date: Wed Nov 1 01:38:16 2006 +0100
300 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
301 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
302 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
303 MPC5XXX_WU_GPIO_DATA_O for affected boards.
305 - Add defintions for some MPC5XXX GPIO pins.
307 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
308 Author: Bartlomiej Sieka <tur@semihalf.com>
309 Date: Wed Nov 1 01:34:29 2006 +0100
311 Changed MarelV38B board make target to lowercase. Config file cleanup.
313 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
314 Author: Wolfgang Denk <wd@pollux.denx.de>
315 Date: Sun Oct 29 01:03:51 2006 +0200
317 Automatically adjust ARFLAGS so "make -s" is really silent.
319 commit fae684e89844856383bdf101440889557df3e6b1
320 Author: Stefan Roese <sr@denx.de>
321 Date: Sat Oct 28 16:45:00 2006 +0200
323 [PATCH] omap925.c: Remove unused functions
325 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
326 Signed-off-by: Stefan Roese <sr@denx.de>
328 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
329 Author: Stefan Roese <sr@denx.de>
330 Date: Sat Oct 28 17:12:58 2006 +0200
332 [PATCH] Add some missing machtypes for netstar & voiceblue boards
334 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
337 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
338 Signed-off-by: Stefan Roese <sr@denx.de>
340 commit 856f054410cef52d868feb330168b2a4c4091328
341 Author: Stefan Roese <sr@denx.de>
342 Date: Sat Oct 28 15:55:52 2006 +0200
344 [PATCH] NAND: Partition name support added to NAND subsystem
346 chpart, nboot and NAND subsystem related commands now accept also partition
347 name to specify offset.
349 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
350 Signed-off-by: Stefan Roese <sr@denx.de>
352 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
353 Author: Wolfgang Denk <wd@pollux.denx.de>
354 Date: Sat Oct 28 02:29:44 2006 +0200
358 commit 2751a95abd1b96911081c357e96a12fa97b40dee
359 Author: Wolfgang Denk <wd@pollux.denx.de>
360 Date: Sat Oct 28 02:29:14 2006 +0200
362 Enable commandline editing and hush shell on all TQM boards.
364 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
365 Author: Wolfgang Denk <wd@pollux.denx.de>
366 Date: Sat Oct 28 02:28:02 2006 +0200
368 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
370 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
371 Author: Wolfgang Denk <wd@denx.de>
372 Date: Sat Oct 28 01:14:32 2006 +0200
374 Check for illegal character '=' in environment variable names.
376 Make sure the string passed as variable name does not contain a '='
377 character. This not only prevents the common error or typing
378 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
379 also closes a backdoor which allowed to delete write-protected
380 environment variables, for example by using "setenv ethaddr=".
382 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
383 Author: Wolfgang Denk <wd@pollux.denx.de>
384 Date: Sat Oct 28 00:38:39 2006 +0200
388 commit e11887a77d81077416a2d1c5e0354916fee8c034
389 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
390 Date: Thu Oct 26 17:55:31 2006 +0200
392 Don't pass any debug options directly to the assembler
394 When passing the -g option to gcc, gcc automatically selects a
395 suitable --g<format> option to pass on to the assembler.
396 Thus, there's no point in forcing a specific debug option on the
397 assembler using the -Wa mechanism.
399 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
401 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
402 Author: Jon Loeliger <jdl@freescale.com>
403 Date: Fri Oct 27 07:47:22 2006 -0500
405 MPC86xx: Cleaned up unused and conditionally used local variables.
407 Signed-off-by: Jon Loeliger <jdl@freescale.com>
409 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
410 Author: Wolfgang Denk <wd@pollux.denx.de>
411 Date: Fri Oct 27 11:55:21 2006 +0200
413 Fix "ar" flags in some Makefiles to allow for silent "make -s"
415 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
416 Author: Ben Warren <bwarren@qstreams.com>
417 Date: Thu Oct 26 14:38:25 2006 -0400
419 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
420 to a TSEC (e.g. a switch is connected via RMII) or
421 if the PHY is defective/incorrectly configured.
423 Signed-off-by: Ben Warren <bwarren@qstreams.com>
425 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
426 Author: Ben Warren <bwarren@qstreams.com>
427 Date: Thu Oct 26 14:38:25 2006 -0400
429 Fix TSEC driver: avoid crashes if PHY is not attached
430 to a TSEC (e.g. a switch is connected via RMII) or
431 if the PHY is defective/incorrectly configured.
433 Signed-off-by: Ben Warren <bwarren@qstreams.com>
435 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
436 Author: Wolfgang Denk <wd@pollux.denx.de>
437 Date: Thu Oct 26 16:24:31 2006 +0200
441 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
442 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
443 Date: Wed Oct 25 15:48:59 2006 +0200
445 Finish up support for the ATSTK1000/ATSTK1002 boards
447 Add atstk1002_config target to Makefile and move the AVR32 section
448 down below Blackfin so that it doesn't end up in the middle of
451 Drop the autogenerated linker script thing for now. Will have to
452 revisit how to handle chips with different flash and RAM layout
455 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
457 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
458 Author: Kumar Gala <galak@kernel.crashing.org>
459 Date: Tue Oct 24 23:47:37 2006 -0500
461 Added support for Multi-Image files that contain a device tree
463 If a Multi-Image file contains a third image we try to use it as a
464 device tree. The device tree image is assumed to be uncompressed in the
465 image file. We automatically allocate space for the device tree in memory
466 and provide an 8k pad to allow more than a reasonable amount of growth.
468 Additionally, a device tree that was contained in flash will now automatically
469 get copied to system memory as part of boot. Previously an error was
470 reported if one tried to boot a device tree that was in flash.
472 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
474 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
475 Author: Wolfgang Denk <wd@denx.de>
476 Date: Tue Oct 24 21:35:55 2006 +0200
478 Switch to automatically generated CHANGELOG file.
479 (use "make CHANGELOG" to update it from time to time)
481 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
482 Author: Stefan Roese <sr@denx.de>
483 Date: Tue Oct 24 18:06:48 2006 +0200
485 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
486 Patch by Stefan Roese, 24 Oct 2006
488 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
489 Author: Wolfgang Denk <wd@pollux.denx.de>
490 Date: Tue Oct 24 17:24:55 2006 +0200
492 Merge with /home/wd/git/u-boot/master
494 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
495 Author: Wolfgang Denk <wd@pollux.denx.de>
496 Date: Tue Oct 24 15:32:57 2006 +0200
500 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
501 Author: Wolfgang Denk <wd@pollux.denx.de>
502 Date: Tue Oct 24 14:51:36 2006 +0200
504 Move atstk1000 files into vendor specific directory.
505 Patch by Haavard Skinnemoen, 12 Sep 2006
507 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
508 Author: Wolfgang Denk <wd@pollux.denx.de>
509 Date: Tue Oct 24 14:42:37 2006 +0200
511 Add ATSTK1000 and ATSTK1002 board support
512 Patch by Haavard Skinnemoen, 06 Sep 2006
514 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
517 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
518 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
519 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
520 CompactFlash cards. For more information, please see this page:
522 http://www.atmel.com/dyn/products/tools.asp?family_id=682
524 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
527 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
529 commit f93ae788c3640fcde5db383471d45548ff4060d0
530 Author: Wolfgang Denk <wd@pollux.denx.de>
531 Date: Tue Oct 24 14:31:24 2006 +0200
533 Add common serial driver for Atmel AT32 and AT91 chips
534 Patch by Haavard Skinnemoen, 06 Sep 2006
536 This is a first attempt at creating a common serial driver for Atmel
537 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
538 be possible to support AT91RM9200 and other ARM-based chips with some
541 There's nothing fundamentally AVR32-specific in this driver, but it
542 does use some features which are currently only defined for the
544 * pm_get_clock_freq: Obtain the clock frequency of a given domain
545 * gd->console_uart: A "struct device" containing information about
546 register mappings, gpio resources and clocks associated with the
549 For more information about these features, please see the "AT32AP
552 commit 72a087e04705c26cad982879ebd06b5281bf825a
553 Author: Wolfgang Denk <wd@pollux.denx.de>
554 Date: Tue Oct 24 14:27:35 2006 +0200
556 Add AT32AP CPU and AT32AP7000 SoC support
557 Patch by Haavard Skinnemoen, 06 Sep 2006
559 This patch adds support for the AT32AP CPU family and the AT32AP7000
560 chip, which is the first chip implementing the AVR32 architecture.
562 The AT32AP CPU core is a high-performance implementation featuring a
563 7-stage pipeline, separate instruction- and data caches, and a MMU.
564 For more information, please see the "AVR32 AP Technical Reference":
566 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
568 In addition to this, the AT32AP7000 chip comes with a large set of
569 integrated peripherals, many of which are shared with the AT91 series
570 of ARM-based microcontrollers from Atmel. Full data sheet is
573 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
575 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
577 commit 7b64fef33c66be648826c0ff9758298ef13d0604
578 Author: Wolfgang Denk <wd@pollux.denx.de>
579 Date: Tue Oct 24 14:21:16 2006 +0200
581 Add AVR32 architecture support
582 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
584 This patch adds common infrastructure code for the Atmel AVR32
585 architecture. See doc/README.AVR32 for details.
587 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
589 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
590 Author: Wolfgang Denk <wd@pollux.denx.de>
591 Date: Tue Oct 24 13:57:33 2006 +0200
593 Use -g instead of -gstabs in AFLAGS_DEBUG
594 Patch by Haavard Skinnemoen, 30 Aug 2006
596 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
597 matter what the target's preferred debugging format is. This patch
598 simply replaces -gstabs with -g, so that the default debugging format
599 for the architecture is used.
601 commit 965829872169c2996023840d98e1d85ad148d629
602 Author: Wolfgang Denk <wd@pollux.denx.de>
603 Date: Tue Oct 24 13:55:18 2006 +0200
605 Fix/workaround broken dependency handling with make 3.81
606 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
608 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
609 Author: Marian Balakowicz <m8@semihalf.com>
610 Date: Mon Oct 23 22:17:05 2006 +0200
612 Fix sequoia separate object direcory building problems.
614 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
615 Author: Jon Loeliger <jdl@freescale.com>
616 Date: Fri Oct 20 17:16:35 2006 -0500
618 Use generic I2C register block on 85xx and 86xx.
620 Replace private IMMAP I2C structures with generic reg block
621 and allow 86xx to have multiple I2C device busses.
623 Signed-off-by: Jon Loeliger <jdl@freescale.com>
625 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
626 Author: Jon Loeliger <jdl@freescale.com>
627 Date: Fri Oct 20 15:54:34 2006 -0500
629 Fix compilation warnings on a few 85xx boards.
631 Signed-off-by: Jon Loeliger <jdl@freescale.com>
633 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
634 Author: Jon Loeliger <jdl@freescale.com>
635 Date: Fri Oct 20 15:50:15 2006 -0500
637 Converted all 85xx boards to use a common FSL I2C driver.
638 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
639 And removed hard i2c path from a few u-boot.lds scipts too.
640 Minor whitespace cleanups along the way.
642 Signed-off-by: Jon Loeliger <jdl@freescale.com>
644 commit 4d45f69e362b05892c9e92a7907e5820995612aa
645 Author: Jon Loeliger <jdl@freescale.com>
646 Date: Thu Oct 19 12:02:24 2006 -0500
648 Rewrite a series of goto statements as a sequences of
649 conditional expressions instead.
651 Use consistent return code 0/-1 for good/bad indicators.
653 Include one fewer file if the driver isn't used at all.
655 Signed-off-by: Jon Loeliger <jdl@freescale.com>
657 commit 7237c033b02fe295880435f1eb80819a0c987532
658 Author: Jon Loeliger <jdl@freescale.com>
659 Date: Thu Oct 19 11:02:16 2006 -0500
661 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
663 in an effort to begin to unify the umpteen FSL I2C drivers that
664 are all otherwise very similar.
666 Signed-off-by: Jon Loeliger <jdl@freescale.com>
668 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
669 Author: Jon Loeliger <jdl@freescale.com>
670 Date: Thu Oct 19 11:33:52 2006 -0500
672 * Fix a bunch of compiler warnings for gcc 4.0
674 Signed-off-by: Matthew McClintock <msm@freescale.com>
676 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
677 Author: Stefan Roese <sr@denx.de>
678 Date: Tue Oct 17 06:14:31 2006 +0200
680 Add monitor functions for indirect access to PPC440 DCR's
681 Patch by Leonid Baryudin, 12 Oct 2006
683 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
684 Author: Jon Loeliger <jdl@freescale.com>
685 Date: Fri Oct 13 16:47:53 2006 -0500
687 Fixed leading whitespace issues.
688 Removed spurious LAWAR thing.
690 Signed-off-by: Jon Loeliger <jdl@freescale.com>
692 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
693 Author: Jon Loeliger <jdl@freescale.com>
694 Date: Thu Oct 12 10:42:36 2006 -0500
696 Remove unneeded include files and local variable.
698 Signed-off-by: Jon Loeliger <jdl@freescale.com>
700 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
701 Author: Grant Likely <grant.likely@secretlab.ca>
702 Date: Tue Oct 10 00:23:32 2006 -0600
704 Fix possible uninitialized variable compiler warning.
706 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
707 do_bootm_linux() may be uninitialized. There is no possibility in the
708 current code that len will get used uninitialized, but this fix follows
709 the existing convention of setting both len and data to zero at the same
712 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
714 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
715 Author: Matthew McClintock <msm@freescale.com>
716 Date: Wed Oct 11 15:13:01 2006 -0500
718 * Fix a bunch of compiler warnings for gcc 4.0
720 Signed-off-by: Matthew McClintock <msm@freescale.com>
722 commit bf651baa365e5447246aad6a633ccd667cf24a39
723 Author: Jon Loeliger <jdl@freescale.com>
724 Date: Wed Oct 11 10:10:43 2006 -0500
726 Move "ar" flags to config.mk to allow for silent "make -s"
728 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
729 Author: Jon Loeliger <jdl@freescale.com>
730 Date: Tue Oct 10 17:19:03 2006 -0500
732 Coding style changes to remove local varible blocks
733 and reformat a bit nicer.
735 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
736 Author: Jon Loeliger <jdl@freescale.com>
737 Date: Tue Oct 10 17:16:04 2006 -0500
739 Fix whitespace issues.
741 commit 7b382b7125f2397cce63253df62f183e3dfa2770
742 Author: Jon Loeliger <jdl@freescale.com>
743 Date: Tue Oct 10 17:14:45 2006 -0500
745 Fix whitespace issues.
747 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
748 Author: Jon Loeliger <jdl@freescale.com>
749 Date: Tue Oct 10 17:06:53 2006 -0500
751 Fix whitespace issues.
753 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
754 Author: Jon Loeliger <jdl@freescale.com>
755 Date: Tue Oct 10 17:03:43 2006 -0500
757 Ran lindent and cleaned up whitespace issues.
758 Format for 80-columns too.
760 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
761 Author: Jon Loeliger <jdl@freescale.com>
762 Date: Tue Oct 10 17:02:22 2006 -0500
764 Fix whitespace and 80-col issues.
766 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
767 Author: Stefan Roese <sr@denx.de>
768 Date: Sat Oct 7 11:36:51 2006 +0200
770 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
771 Patch by Stefan Roese, 07 Oct 2006
773 commit 5bc528fa4da751d472397b308137238a6465afd2
774 Author: Stefan Roese <sr@denx.de>
775 Date: Sat Oct 7 11:35:25 2006 +0200
777 Update ALPR code (NAND support working now)
778 Patch by Stefan Roese, 07 Oct 2006
780 commit 77d5034847d328753b80c46b83f960a14a26f40e
781 Author: Stefan Roese <sr@denx.de>
782 Date: Sat Oct 7 11:33:03 2006 +0200
784 Remove compile warnings in fpga code
785 Patch by Stefan Roese, 07 Oct 2006
787 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
788 Author: Stefan Roese <sr@denx.de>
789 Date: Sat Oct 7 11:30:52 2006 +0200
791 Add CONFIG_BOARD_RESET to configure board specific reset function
792 Patch by Stefan Roese, 07 Oct 2006
794 commit f55df18187e7a45cb73fec4370d12135e6691ae1
795 Author: John Traill <john.traill@freescale.com>
796 Date: Fri Sep 29 08:23:12 2006 +0100
798 Fix missing tCycle/modfreq calculation.
800 Signed-off-by: John Traill <john.traill@freescale.com>
802 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
803 Author: Andy Fleming <afleming@freescale.com>
804 Date: Wed Sep 13 10:33:35 2006 -0500
806 Updated config headers to add default FDT-based booting
808 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
809 Author: Andy Fleming <afleming@freescale.com>
810 Date: Wed Sep 13 10:34:18 2006 -0500
812 Add support for eTSEC 3 & 4 on 8548 CDS
814 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
815 This will only work on rev 1.3 boards (but doesn't break older boards)
816 * Cleaned up some comments to reflect the expanded role of tsec
819 commit 084d648b109c8984f83674043c1a7fa3885ef801
820 Author: Andy Fleming <afleming@freescale.com>
821 Date: Wed Sep 13 10:33:56 2006 -0500
823 Added code to support 2.6.18 PCI changes in u-boot
825 * Added code to swizzle the IRQ map for the PCI
827 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
828 Author: Jon Loeliger <jdl@freescale.com>
829 Date: Tue Sep 19 09:34:10 2006 -0500
831 Modified makefile for new build mechanism.
833 Signed-off-by: Jon Loeliger <jdl@freescale.com>
835 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
836 Author: Jon Loeliger <jdl@freescale.com>
837 Date: Thu Sep 14 08:40:36 2006 -0500
839 Handle 86xx SVR values according to the new Reference Manual.
840 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
841 by the byte in bits 16-23 instead.
842 Thanks to Jason Jin for noticing.
844 Signed-off-by: Jon Loeliger <jdl@freescale.com>
846 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
847 Author: Zhang Wei <wei.zhang@freescale.com>
848 Date: Mon Aug 28 14:25:31 2006 +0800
850 Fixed an OF-tree off-by-one bug when adding a new property name.
851 This bug will cause the kernel booting to pause a long time.
853 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
854 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
856 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
857 Author: Jon Loeliger <jdl@freescale.com>
858 Date: Tue Aug 29 11:05:09 2006 -0500
860 Remove trailing empty lines.
862 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
863 Author: Jon Loeliger <jdl@freescale.com>
864 Date: Tue Aug 29 09:48:49 2006 -0500
866 Remove bogus msync and use volatile asm.
868 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
869 Author: Jon Loeliger <jdl@freescale.com>
870 Date: Tue Aug 29 08:17:14 2006 -0500
872 Add myself as maintainer for MPC8641HPCN.
874 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
875 Author: Zhang Wei <wei.zhang@freescale.com>
876 Date: Mon Aug 28 14:25:31 2006 +0800
878 Fixed an OF-tree off-by-one bug when adding a new property name.
879 This bug will cause the kernel booting to pause a long time.
881 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
883 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
884 Author: Haiying Wang <haiying.wang@freescale.com>
885 Date: Fri Aug 25 14:38:34 2006 -0400
887 Change ramdiskaddr and dtbaddr
888 Remove PEX fluff commands.
890 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
891 Signed-off-by: Jon Loeliger <jdl@freescale.com>
893 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
894 Author: Matthew McClintock <msm@freescale.com>
895 Date: Wed Aug 23 13:32:45 2006 -0500
897 * Another small fix for booting with disable_of
899 Signed-off-by: Matthew McClintock <msm@freescale.com>
901 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
902 Author: Jon Loeliger <jdl@freescale.com>
903 Date: Wed Aug 23 11:04:43 2006 -0500
905 Cleanup and lindent new AHCI driver.
907 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
908 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
909 Date: Wed Aug 23 19:15:12 2006 +0800
911 Add AHCI define and sata support for MPC8641HPCN board.
913 Signed-off-by:Jason Jin<jason.jin@freescale.com>
915 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
916 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
917 Date: Wed Aug 23 19:10:44 2006 +0800
919 Add AHCI support to u-boot
921 Add AHCI support in u-boot, enable the sata disk controllers which
922 following the AHCI protocol.
924 Signed-off-by:Jason Jin<jason.jin@freescale.com>
926 commit d8ea2acf5f137cae99417df4f573d036ee384668
927 Author: Zhang Wei <wei.zhang@freescale.com>
928 Date: Wed Aug 23 17:54:32 2006 +0800
930 Add dtb boot-up parameter to default boot commands.
932 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
934 commit b93775c2036b99baa390ea425c4771895bbc63c4
935 Author: Jon Loeliger <jdl@freescale.com>
936 Date: Tue Aug 22 18:26:08 2006 -0500
938 Cleanup even more poorly introduced whitespace.
940 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
941 Author: Jon Loeliger <jdl@freescale.com>
942 Date: Tue Aug 22 18:07:00 2006 -0500
944 Cleanup more poorly introduced whitespace.
946 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
947 Author: Jon Loeliger <jdl@freescale.com>
948 Date: Tue Aug 22 17:54:05 2006 -0500
950 Cleanup poorly introduced whitespace.
952 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
953 Author: Jon Loeliger <jdl@freescale.com>
954 Date: Tue Aug 22 12:25:27 2006 -0500
956 General indent and whitespace cleanups.
958 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
959 Author: Jon Loeliger <jdl@freescale.com>
960 Date: Tue Aug 22 12:06:18 2006 -0500
962 General indent and whitespace cleanups.
964 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
965 Author: Jon Loeliger <jdl@freescale.com>
966 Date: Tue Aug 22 10:42:21 2006 -0500
968 Cleanup compiler warnings.
970 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
971 Author: Matthew McClintock <msm@freescale.com>
972 Date: Tue Aug 22 09:31:59 2006 -0500
974 Fix disable_of booting
976 Signed-off-by: Matthew McClintock <msm@freescale.com>
978 commit 87a449c8ac396420cb24260f717ea9e6faa82047
979 Author: Matthew McClintock <msm@freescale.com>
980 Date: Tue Aug 22 09:23:55 2006 -0500
982 Support for FDT in uImage format, error when using FDT from flash
984 Signed-off-by: Matthew McClintock <msm@freescale.com>
986 commit 75c299c38369d01addd5e054b8a16217b70f4a86
987 Author: Haiying Wang <haiying.wang@freescale.com>
988 Date: Tue Aug 15 15:12:55 2006 -0400
990 Unlock cache before kernel starts up for MPC86xx
992 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
993 Author: Haiying Wang <haiying.wang@freescale.com>
994 Date: Tue Aug 15 15:13:15 2006 -0400
996 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
998 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
999 Author: Haiying Wang <haiying.wang@freescale.com>
1000 Date: Tue Aug 15 15:12:55 2006 -0400
1002 Unlock cache before kernel starts up for MPC86xx
1004 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
1005 Author: Haiying Wang <haiying.wang@freescale.com>
1006 Date: Tue Aug 15 15:13:15 2006 -0400
1008 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
1010 commit 86c8e17f25e972a7e272950a0735fad84e082b88
1011 Author: Matthew McClintock <msm@freescale.com>
1012 Date: Wed Aug 16 13:59:47 2006 -0500
1014 * Fix disable_of booting
1016 Signed-off-by: Matthew McClintock <msm@freescale.com>
1018 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
1019 Author: Matthew McClintock <msm@freescale.com>
1020 Date: Wed Aug 16 10:54:09 2006 -0500
1022 * Support for FDT in uImage format, error when using FDT from flash
1024 Signed-off-by: Matthew McClintock <msm@freescale.com>
1026 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
1027 Author: Stefan Roese <sr@denx.de>
1028 Date: Tue Aug 15 14:22:35 2006 +0200
1030 Add initial support for the ALPR board from Prodrive
1031 NAND needs some additional testing
1032 Patch by Heiko Schocher, 15 Aug 2006
1034 commit f0ff4692ff3372dec55074a8eb444943ab095abb
1035 Author: Stefan Roese <sr@denx.de>
1036 Date: Tue Aug 15 14:15:51 2006 +0200
1038 Add FPGA Altera Cyclone 2 support
1039 Patch by Heiko Schocher, 15 Aug 2006
1041 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
1042 Author: Jon Loeliger <jdl@freescale.com>
1043 Date: Mon Aug 14 15:33:38 2006 -0500
1045 Fix BAT0 to actually be cacheable, non-guarded as documented.
1047 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1049 commit 40bc83559db5745681909fd7382ae509567e116d
1050 Author: Jon Loeliger <jdl@freescale.com>
1051 Date: Wed Aug 9 15:32:16 2006 -0500
1053 Removed MPC8641HPCN DTS source file from build.
1054 It is no longer linked into U-Boot; its sources are
1055 now located in the kernel tree.
1057 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1059 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
1060 Author: Matthew McClintock <msm@freescale.com>
1061 Date: Wed Jun 28 10:47:03 2006 -0500
1063 * Switched default PCI speed for 8540 ADS back to 33MHz
1065 * Added comments and a printf to warn that PCI-X won't
1067 Patch by Andy Fleming 17-Mar-2006
1069 Signed-off-by: Andy Fleming <afleming@freescale.com>
1071 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
1072 Author: Matthew McClintock <msm@freescale.com>
1073 Date: Wed Jun 28 10:46:35 2006 -0500
1075 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
1077 Signed-off-by: Andy Fleming <afleming@freescale.com>
1079 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
1080 Author: Matthew McClintock <msm@freescale.com>
1081 Date: Wed Jun 28 10:46:13 2006 -0500
1083 * Added VIA configuration table
1085 * Added support for PCI2 on CDS
1086 Patch by Andy Fleming 17-Mar-2006
1088 Signed-off-by: Andy Fleming <afleming@freescale.com>
1090 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
1091 Author: Matthew McClintock <msm@freescale.com>
1092 Date: Wed Jun 28 10:45:41 2006 -0500
1094 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
1096 Signed-off-by: Andy Fleming <afleming@freescale.com>
1098 commit 97074ed9655309b64231bc2cee69fe85399f8055
1099 Author: Matthew McClintock <msm@freescale.com>
1100 Date: Wed Jun 28 10:45:17 2006 -0500
1102 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
1104 Signed-off-by: Andy Fleming <afleming@freescale.com>
1106 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
1107 Author: Matthew McClintock <msm@freescale.com>
1108 Date: Wed Jun 28 10:44:49 2006 -0500
1110 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
1112 Signed-off-by: Andy Fleming <afleming@freescale.com>
1114 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
1115 Author: Matthew McClintock <msm@freescale.com>
1116 Date: Wed Jun 28 10:44:23 2006 -0500
1118 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
1120 Signed-off-by: Andy Fleming <afleming@freescale.com>
1122 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
1123 Author: Matthew McClintock <msm@freescale.com>
1124 Date: Wed Jun 28 10:43:36 2006 -0500
1126 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
1128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1130 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
1131 Author: Matthew McClintock <msm@freescale.com>
1132 Date: Wed Jun 28 10:43:00 2006 -0500
1134 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
1136 commit 5498d90312aad9f6bdbf047986027c35b03cd163
1137 Author: Matthew McClintock <msm@freescale.com>
1138 Date: Wed Jun 28 10:42:24 2006 -0500
1140 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
1142 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
1143 Author: Matthew McClintock <msm@freescale.com>
1144 Date: Wed Jun 28 10:41:37 2006 -0500
1146 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
1148 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
1149 Author: John Traill <john.traill@freescale.com>
1150 Date: Wed Aug 9 14:33:50 2006 +0100
1152 Add Rapidio support for the MPC8641HPCN
1154 Signed-off-by: John Traill <john.traill@freescale.com>
1156 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
1157 Author: John Traill <john.traill@freescale.com>
1158 Date: Tue Aug 8 11:32:43 2006 +0100
1160 Fix caslat calculation
1162 Signed-off-by: John Traill <john.traill@freescale.com>
1164 commit 709d3073e74153278e7904a70819bbef7df50e1a
1165 Author: Jon Loeliger <jdl@freescale.com>
1166 Date: Thu Aug 3 16:17:56 2006 -0500
1168 Convert to mac-address in ethernet nodes.
1170 commit 71748af833ca1017edf1415be376366ff2937d17
1171 Author: Haiying Wang <haiying.wang@freescale.com>
1172 Date: Fri Jul 28 12:41:35 2006 -0400
1174 Correct the irq value of DUART2
1176 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
1177 Author: Haiying Wang <haiying.wang@freescale.com>
1178 Date: Fri Jul 28 12:41:41 2006 -0400
1180 Change the space size of PEX IO in README
1182 commit 239db37c94f7a92941c4465feceb867c609241c5
1183 Author: Haiying Wang <haiying.wang@freescale.com>
1184 Date: Fri Jul 28 12:41:18 2006 -0400
1186 Move get_board_sys_clk to board directory
1188 commit 492900b985439fbce1a118afde1e35def870db03
1189 Author: John Traill <john.traill@freescale.com>
1190 Date: Fri Jul 28 09:03:54 2006 +0100
1192 Fix 8641HPCN pollution
1194 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
1195 Author: John Traill <john.traill@freescale.com>
1196 Date: Fri Jul 28 08:16:06 2006 +0100
1198 Fix 8641HPCN timebase
1200 commit c86360b830f1eecd7a72208575dde4f57879faea
1201 Author: Zhang Wei <wei.zhang@freescale.com>
1202 Date: Fri Jul 28 00:01:34 2006 +0800
1204 Fixed OF device tree of mpc86xxhpcn board.
1206 The changes works in with kernel irq mapping rework.
1208 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
1210 commit bea3f28d285942bf3f7ab339ce85178ded544225
1211 Author: Haiying Wang <haiying.wang@freescale.com>
1212 Date: Wed Jul 12 10:48:05 2006 -0400
1214 Add support for reading and writing mac addresses to or from ID EEPROM.
1216 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
1217 With attached patch, we can use command "mac/mac read/mac save/"
1218 to read and write EEPROM under u-boot prompt.
1220 U-boot will calculate the checksum of EEPROM while bootup,
1221 if it is right, then u-boot will check whether the mac address
1222 of eTSEC0/1/2/3 is availalbe (non-zero).
1224 If there is mac address availabe in EEPROM, u-boot will use it,
1225 otherewise, u-boot will use the mac address defined in
1226 MPC8641HPCN.h. This matches the requirement to set unique mac address
1229 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
1230 Signed-off-by: York Sun <yorksun@freescale.com>
1232 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
1233 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
1234 Date: Thu Jul 13 10:35:10 2006 -0500
1236 Fixed initrd issue by define big RAM
1238 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
1240 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
1241 Author: Jason Jin <Jason.jin@freescale.com>
1242 Date: Fri Jul 7 10:01:45 2006 -0500
1244 We made a u-boot patch to fix the hang up issue
1245 when booting filesystem from ramdisk.
1247 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
1249 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
1250 Author: Matthew McClintock <msm@freescale.com>
1251 Date: Wed Jun 28 10:47:03 2006 -0500
1253 * Switched default PCI speed for 8540 ADS back to 33MHz
1254 * Added comments and a printf to warn that PCI-X won't
1256 Patch by Andy Fleming 17-Mar-2006
1258 Signed-off-by: Andy Fleming <afleming@freescale.com>
1260 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
1261 Author: Matthew McClintock <msm@freescale.com>
1262 Date: Wed Jun 28 10:46:35 2006 -0500
1264 * Fixed a bug where 8555 PCI code used the old variable and
1266 Patch by Andy Fleming 17-Mar-2006
1268 Signed-off-by: Andy Fleming <afleming@freescale.com>
1270 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
1271 Author: Matthew McClintock <msm@freescale.com>
1272 Date: Wed Jun 28 10:46:13 2006 -0500
1274 * Added VIA configuration table
1275 * Added support for PCI2 on CDS
1276 Patch by Andy Fleming 17-Mar-2006
1278 Signed-off-by: Andy Fleming <afleming@freescale.com>
1280 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
1281 Author: Matthew McClintock <msm@freescale.com>
1282 Date: Wed Jun 28 10:45:41 2006 -0500
1284 * Fixed PCI memory definitions
1285 Patch by Andy Fleming 17-Mar-2006
1287 Signed-off-by: Andy Fleming <afleming@freescale.com>
1289 commit 087454609e47295443af793a282cddcd91a5f49c
1290 Author: Matthew McClintock <msm@freescale.com>
1291 Date: Wed Jun 28 10:45:17 2006 -0500
1293 * Added support for initializing second PCI bus on 85xx
1294 Patch by Andy Fleming 17-Mar-2006
1296 Signed-off-by: Andy Fleming <afleming@freescale.com>
1298 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
1299 Author: Matthew McClintock <msm@freescale.com>
1300 Date: Wed Jun 28 10:44:49 2006 -0500
1302 * Added PCI-X #defines for PCI-X initialization
1303 Patch by Andy Fleming on 17-Mar-2006
1305 Signed-off-by: Andy Fleming <afleming@freescale.com>
1307 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
1308 Author: Matthew McClintock <msm@freescale.com>
1309 Date: Wed Jun 28 10:44:23 2006 -0500
1311 * Made sure the code which disables prefetch for PCI devices
1312 sets the size of the prefetch region to 0
1313 Patch by Andy Fleming on 17-Mar-2006
1315 Signed-off-by: Andy Fleming <afleming@freescale.com>
1317 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
1318 Author: Matthew McClintock <msm@freescale.com>
1319 Date: Wed Jun 28 10:43:36 2006 -0500
1321 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
1322 Patch by Jon Loeliger 17-Jan-2006
1324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1326 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
1327 Author: Matthew McClintock <msm@freescale.com>
1328 Date: Wed Jun 28 10:43:00 2006 -0500
1330 * Removed the oftree.dts for stxxtx in light of the changes
1331 to the flat device tree handling code
1332 Patch by Matthew McClintock 26-June-2006
1334 commit 1b380ec225665e73959677f3893dc658c5925e05
1335 Author: Matthew McClintock <msm@freescale.com>
1336 Date: Wed Jun 28 10:42:24 2006 -0500
1338 * Patch to modify ft_build.c to update flat device trees in place
1339 Patch by Matthew McClintock 26-June-2006
1341 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
1342 Author: Matthew McClintock <msm@freescale.com>
1343 Date: Wed Jun 28 10:41:37 2006 -0500
1345 * Modify bootm command to support booting with flat device trees
1346 Patch by Matthew McClintock 26-June-2006
1348 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
1349 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
1350 Date: Wed Jun 28 08:43:56 2006 -0500
1352 Change Id to symbolic name for RTL8139
1354 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1356 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
1357 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
1358 Date: Tue Jun 27 18:12:10 2006 +0800
1360 Fix RTL8139 in big endian
1362 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
1363 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
1365 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
1366 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
1367 Date: Tue Jun 27 18:12:23 2006 +0800
1369 Fix Tsec bug when no link
1371 When tftp a non-exist file from the tftp server, u-boot will check
1372 the link of all eth port. The original file will return wrong link
1373 state on the no link ports.
1375 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
1377 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
1378 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
1379 Date: Tue Jun 27 18:12:02 2006 +0800
1381 Fix bug for io_bar size during pci scan
1383 During the pci scan process, Some devices return bar_reponse with the
1384 highest bytes 0, such as the pci bridge in uli1575 return bar_response
1385 with 0xffffff, So the bar_size should be manually set under 64K.
1387 Signed-off-by: Jason Jin <jason.jin@freescale.com>
1389 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
1390 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
1391 Date: Tue Jun 27 18:11:54 2006 +0800
1393 Enable PCIE1 for MPC8641HPCN board
1395 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1397 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
1398 Author: Jon Loeliger <jdl@freescale.com>
1399 Date: Thu Jun 22 08:51:46 2006 -0500
1401 Fix bug in 8641hpcn reset command with no args.
1403 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
1404 Acked-by: Jon Loeliger <jdl@freescale.com>
1406 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
1407 Author: Zhang Wei <wei.zhang@freescale.com>
1408 Date: Tue Jun 20 17:47:15 2006 +0800
1410 Reworked IRQ mapping in OF-tree.
1412 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
1413 Author: Jon Loeliger <jdl@freescale.com>
1414 Date: Thu Jun 15 21:33:37 2006 -0500
1416 Do not enable address translation on secondary CPUs.
1417 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
1419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1421 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
1422 Author: Jon Loeliger <jdl@jdl.com>
1423 Date: Wed Jun 7 10:53:55 2006 -0500
1425 Fix a get_board_sys_clk() use-before-def warning.
1427 Signed-off-by: Jon Loeliger <jdl@jdl.com>
1429 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
1430 Author: Jon Loeliger <jdl@jdl.com>
1431 Date: Wed Jun 7 10:52:49 2006 -0500
1433 Allow DTC path to be passed in.
1435 Signed-off-by: Jon Loeliger <jdl@jdl.com>
1437 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
1438 Author: Haiying Wang <haiying.wang@freescale.com>
1439 Date: Tue Jun 6 16:54:29 2006 -0400
1441 Modify the IRQ of DUART2
1443 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
1444 Author: Jon Loeliger <jdl@jdl.com>
1445 Date: Wed May 31 13:55:35 2006 -0500
1449 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1451 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
1452 Author: Jon Loeliger <jdl@jdl.com>
1453 Date: Wed May 31 12:44:44 2006 -0500
1455 White space cleanup.
1456 Some 80-column cleanups.
1457 Convert printf() to puts() where possible.
1458 Use #include "spd_sdram.h" as needed.
1459 Enhanced reset command usage message a bit.
1461 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1463 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
1464 Author: Jon Loeliger <jdl@jdl.com>
1465 Date: Wed May 31 11:39:34 2006 -0500
1467 Removed unneeded local_bus_init() from 8641HPCN board.
1469 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1471 commit 4d3d729c16c392d2982d3266b659d333c927697d
1472 Author: Jon Loeliger <jdl@jdl.com>
1473 Date: Wed May 31 11:24:28 2006 -0500
1475 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
1477 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1479 commit b2a941de060350ad15878d8219825f4950e9bb8e
1480 Author: Jon Loeliger <jdl@jdl.com>
1481 Date: Wed May 31 10:07:28 2006 -0500
1483 Remove dead debug code.
1485 Signed-off-by: Jon Loeliger <jdl@jdl.com>
1487 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
1488 Author: Jon Loeliger <jdl@freescale.com>
1489 Date: Tue May 30 17:47:00 2006 -0500
1491 Move mpc86xx PIXIS code to board directory
1493 First cut at moving the PIXIS platform code out of
1494 the 86xx cpu directory and into board/mpc8641hpcn
1497 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1499 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
1500 Author: Haiying Wang <Haiying.Wang@freescale.com>
1501 Date: Tue May 30 09:10:32 2006 -0500
1503 Improve "reset" command's interaction with watchdog.
1505 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
1506 "reset altbank wd" will reset another bank WITH watch dog enabled
1507 "diswd" will disable watch dog after u-boot boots up successfully
1509 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1511 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
1512 Author: Haiying Wang <Haiying.Wang@freescale.com>
1513 Date: Tue May 30 08:51:19 2006 -0500
1515 Fix two SDRAM setup bugs.
1518 Enable 1T/2T based on number of DIMMs present.
1520 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1522 commit d11fec5015334deb2010e36ce00bb118cc5429a5
1523 Author: Haiying Wang <Haiying.Wang@freescale.com>
1524 Date: Fri May 26 10:24:48 2006 -0500
1526 Add first draft of the MPC8641HPCN doc/README.
1528 Signed-off-by: Jon Loeliger <jdl@jdl.com>
1530 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
1531 Author: Haiying Wang <Haiying.Wang@freescale.com>
1532 Date: Fri May 26 10:13:04 2006 -0500
1534 Added pci@8000 block.
1535 Updated ethernet interrupt mappings (moved up 48).
1536 Cleaned up a few comments.
1538 Signed-off-by: Jon Loeliger <jdl@jdl.com>
1540 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
1541 Author: Haiying Wang <Haiying.Wang@freescale.com>
1542 Date: Fri May 26 10:01:16 2006 -0500
1544 Allow args on reset command.
1546 Signed-off-by: Jon Loeliger <jdl@jdl.com>
1548 commit 14e37081ff3cac7ebe6e93836523429853b6b292
1549 Author: Jon Loeliger <jdl@jdl.com>
1550 Date: Fri May 19 13:28:39 2006 -0500
1552 Change arbitration to round-robin for SMP linux.
1554 commit 9a655876e5995be80f49054e2509500e871e4d3a
1555 Author: Jon Loeliger <jdl@jdl.com>
1556 Date: Fri May 19 13:26:34 2006 -0500
1558 Enable dual DDR controllers and interleaving.
1560 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
1561 Author: Jon Loeliger <jdl@jdl.com>
1562 Date: Fri May 19 13:22:44 2006 -0500
1564 Update 86xx address map and LAWBARs.
1566 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
1567 Author: Jon Loeliger <jdl@jdl.com>
1568 Date: Fri May 19 13:14:15 2006 -0500
1570 Remove L2 Cache invalidate polling.
1572 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
1573 Author: Jon Loeliger <jdl@jdl.com>
1574 Date: Fri May 19 12:33:09 2006 -0500
1576 Enable 2nd CPU and I2C.
1578 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
1579 Author: Jon Loeliger <jdl@freescale.com>
1580 Date: Mon May 15 07:26:56 2006 -0500
1582 Update interrupt mapping.
1584 commit 6cfea33477b04b63ed47386ed1629529484c33ba
1585 Author: Haiying Wang <Haiying.Wang@freescale.com>
1586 Date: Wed May 10 09:38:06 2006 -0500
1588 Remove unneeded INIT_RAM_LOCK cache twiddling.
1589 Correctly tracks r29 as global data pointer now.
1591 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1593 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
1594 Author: Jon Loeliger <jdl@freescale.com>
1595 Date: Wed May 10 09:33:07 2006 -0500
1597 Remove unnecessary flash.c file.
1599 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
1600 Author: Jon Loeliger <jdl@freescale.com>
1601 Date: Tue May 9 08:23:49 2006 -0500
1603 Get MPC8641HPCN flash images working.
1605 Enable the CFI driver.
1606 Remove bogus LAWBAR7 cruft.
1607 Use correct TEXT_BASE, Fixup load script.
1608 Enable SPD EEPROM during DDR setup.
1609 Use generic RFC 1918 IP addresses by default.
1611 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
1612 Author: Jon Loeliger <jdl@freescale.com>
1613 Date: Thu Apr 27 10:15:16 2006 -0500
1615 Cleanup whitespaces and style issues.
1616 Removed //-style comments.
1617 Use 80-column lines.
1618 Remove trailing whitespace.
1619 Remove dead code and debug cruft.
1621 commit a2320a6bf8113a09544c42d160d10ac69d049a03
1622 Author: Jon Loeliger <jdl@freescale.com>
1623 Date: Thu Apr 27 08:22:39 2006 -0500
1625 Revert bad PCI prefetch limit change.
1627 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
1628 Author: Jon Loeliger <jdl@freescale.com>
1629 Date: Wed Apr 26 17:58:56 2006 -0500
1631 Initial support for MPC8641 HPCN board.