1 ======================================================================
2 Changes for U-Boot 1.0.0:
3 ======================================================================
5 * Patch by Steven Scholz, 10 Oct 2003
6 - Add support for Altera FPGA ACEX1K
8 * Patches by Thomas Lange, 09 Oct 2003:
9 - fix cmd_ide.c for non ppc boards (read/write functions did not
11 - fix for shannon board
12 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
13 - Endian swap ATA identity for all big endian CPUs, not just PPC
14 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
16 - add support for dbau1x00 board (MIPS32)
18 * Patch by Sangmoon Kim, 07 Oct 2003:
19 add support for debris board
21 * Patch by Martin Krause, 09 Oct 2003:
23 - /board/trab/rs485.c: correct baudrate
24 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
25 udelay(); fix some timing problems with adc controller
26 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
27 modify commands: touch and buzzer
29 * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
30 (quick & dirty workaround for rogue pointer problem in get_vfatname());
31 Use direct function calls for auto_update instead of hush commands
33 * Patch by Scott McNutt, 04 Oct 2003:
34 - add support for Altera Nios-32 CPU
35 - add support for Nios Cyclone Development Kit (DK-1C20)
37 * Patch by Steven Scholz, 29 Sep 2003:
38 - A second parameter for bootm overwrites the load address for
39 "Standalone Application" images.
40 - bootm sets environment variable "filesize" to the resulting
41 (uncompressed) data length for "Standalone Application" images
42 when autostart is set to "no". Now you can do something like
43 if bootm $fpgadata $some_free_ram ; then
44 fpga load 0 $some_free_ram $filesize
47 * Patch by Denis Peter, 25 Sept 2003:
48 add support for the MIP405 Rev. C board
50 * Patch by Yuli Barcohen, 25 Sep 2003:
51 add support for Zephyr Engineering ZPC.1900 board
53 * Patch by Anders Larsen, 23 Sep 2003:
54 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
55 implemented for the x86 architecture)
57 * Patch by Sangmoon Kim, 23 Sep 2003:
58 fix pll_pci_to_mem_multiplier table for MPC8245
60 * Patch by Anders Larsen, 22 Sep 2003:
61 enable timed autoboot on PXA
63 * Patch by David Müller, 22 Sep 2003:
64 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
65 returns correct libgcc file path
66 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
67 time on s3c24x0 systems
69 * Patch by Jon Diekema, 19 Sep 2003:
70 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
71 link state to the fault LED.
72 - In NetLoop, make the Fault LED reflect the link status. The link
73 status gets updated on entry, and on timeouts.
75 * Patch by Anders Larsen, 18 Sep 2003:
76 allow mkimage to build and run on Cygwin-hosted systems
78 * Patch by Frank Müller, 18 Sep 2003:
79 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
82 * Patch by Pantelis Antoniou, 16 Sep 2003:
83 add tool to compute fileds in the PLPRCR register for MPC86x
85 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
87 * Fix build problems under FreeBSD
89 * Add generic filesystem image type
91 * Make fatload set filesize environment variable
93 * enable basic / medium / high-end configurations for PPChameleonEVB
96 * enable TFTP client code to specify to the server the desired
97 timeout value (see RFC-2349)
99 * Improve SDRAM setup for TRAB board
101 * Suppress all output with splashscreen configured only if "splashimage"
104 * Fix problems with I2C support for mpc5200
106 * Adapt TRAB configuration and auto_update to new memory layout
108 * Add configuration for wtk board
110 * Add support for the Sharp LQ065T9DR51U LCD display
112 * Patch by Rune Torgersen, 17 Sep 2003:
113 - Fixes for MPC8266 default config
114 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
116 * Patches by Jon Diekema, 17 Sep 2003:
117 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
120 - adjust "help" output
122 * Patches by Anders Larsen, 17 Sep 2003:
123 - fix spelling errors
124 - set GD_FLG_DEVINIT flag only after device function pointers
126 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
128 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
129 - trigger watchdog while waiting in serial driver
131 * Add auto-update code for TRAB board using USB memory sticks,
132 support new configuration with more memory
134 * disable MPC5200 bus pipelining as workaround for bus contention
136 * Modify XLB arbiter priorities on MPC5200 so all devices use same
137 priority; configure critical interrupts to be handled like external
140 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
141 go back to 66 MHz for stability
143 * Patches by Jon Diekema, 15 Sep 2003:
144 - add description for missing CFG_CMD_* entries in the README file
147 * Patch by Gleb Natapov, 14 Sep 2003:
148 enable watchdog support for all MPC824x boards that have a watchdog
150 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
151 "Non-octet Aligned Frame" errors we see at 100 Mbps
153 * Patch by Sharad Gupta, 14 Sep 2003:
154 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
156 * Patch by llandre, 11 Sep 2003:
157 update configuration for PPChameleonEVB board
159 * Patch by David Müller, 13 Sep 2003:
160 various changes to VCMA9 board specific files
162 * Add I2C support for MGT5100 / MPC5200
164 * Patch by Rune Torgersen, 11 Sep 2003:
165 Changed default memory option on MPC8266ADS to NOT be Page Based
166 Interleave, since this doesn't work very well with the standard
169 * Patch by George G. Davis, 12 Sep 2003:
170 fix Makefile settings for sk98 driver
172 * Patch by Stefan Roese, 12 Sep 2003:
173 - new boards added: DP405, HUB405, PLU405, VOH405
174 - some esd boards updated
175 - cpu/ppc4xx/sdram.c: disable memory controller before setting
177 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
179 * Patch by Martin Krause, 11 Sep 2003:
180 add burn-in tests for TRAB board
182 * Enable instruction cache on MPC5200 board
184 * Patch by Denis Peter, 11 Sep 2003:
185 - fix USB data pointer assignment for bulk only transfer.
186 - prevent to display erased directories in FAT filesystem.
188 * Change output format for NAND flash - make it look like for other
191 ======================================================================
192 Changes for U-Boot 0.4.8:
193 ======================================================================
195 * Add I2C and RTC support for RMU board
197 * Patches by Denis Peter, 9 Sep 2003:
198 add FAT support for IDE, SCSI and USB
200 * Patches by Gleb Natapov, 2 Sep 2003:
201 - cleanup of POST code for unsupported architectures
202 - MPC824x locks way0 of data cache for use as initial RAM;
203 this patch unlocks it after relocation to RAM and invalidates
206 * Patch by Gleb Natapov, 30 Aug 2003:
207 new I2C driver for mpc107 bridge. Now works from flash.
209 * Patch by Dave Ellis, 11 Aug 2003:
210 - JFFS2: fix typo in common/cmd_jffs2.c
211 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
212 - JFFS2: remove node version 0 warning
213 - JFFS2: accept JFFS2 PADDING nodes
214 - SXNI855T: add AM29LV800 support
215 - SXNI855T: move environment from EEPROM to flash
216 - SXNI855T: boot from JFFS2 in NOR or NAND flash
218 * Patch by Bill Hargen, 11 Aug 2003:
219 fixes for I2C on MPC8240
220 - fix i2c_write routine
222 - eliminates use of global variables, plus dead code, cleanup.
224 * Add support for USB Mass Storage Devices (BBB)
225 (tested with USB memory sticks only)
227 * Avoid flicker on TRAB's VFD
229 * Add support for SK98xx driver
231 * Add PCI support for SL8245 board
233 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
234 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
235 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
237 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
238 to allow for more accurate baudrate settings
239 (error now 0.7% at 115 kbps, instead of 3.5% before)
241 * Patch by Andreas Mohr, 4 Sep 2003:
242 Fix a lot of spelling errors
244 * Add support for PPChameleon Eval Board
246 * Add support for P3G4 board
248 * Fix problem with MGT5100 FEC driver: add "early" MAC address
251 * Patch by Yuli Barcohen, 7 Aug 2003:
252 check BCSR to detect if the board is configured in PCI mode
254 ======================================================================
255 Changes for U-Boot 0.4.7:
256 ======================================================================
258 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
259 add support for Adder II MPC852T module
261 * Patch by George G. Davis, 19 Aug 2003:
262 fix TI Innovator/OMAP1510 pin configs
264 * Patches by Kshitij, 18 Aug 2003
265 - add support for arm926ejs cpu core
266 - add support for TI OMAP 1610 Innovator Board
268 * Patch by Yuli Barcohen, 14 Aug 2003:
269 add support for bzip2 uncompression
271 * Add GCC library to examples/Makefile so GCC utility functions will
274 * Add I2C and RTC support for RMU board using software I2C driver
275 (because of better response to iprobe command); fix problem with
278 * Patch by Matthias Fuchs, 28 Aug 2003:
279 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
280 CONFIG_BOOTP_MAKS (see README).
282 * Fix ICU862 environment problem
284 * Fix RAM size detection for RMU board
286 * Implement "reset" for MGT5100/MPC5200 systems
288 ======================================================================
289 Changes for U-Boot 0.4.6:
290 ======================================================================
292 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
293 allow selection of clock frequency as "make" target
295 * Implement memory autosizing code for IceCube boards
297 * Configure network port on INCA-IP for autonegotiation
299 * Fix overflow problem in network timeout code
301 * Patch by Richard Woodruff, 8 Aug 2003:
302 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
304 ======================================================================
305 Changes for U-Boot 0.4.5:
306 ======================================================================
308 * Update for TQM board defaults:
309 disable clocks_in_mhz, enable boot count limit
311 * Removed tools/gdb from "make all" target. Added make target "gdbtools"
312 in toplevel directory instead. Removed astest.c from tools/gdb because
313 it is no longer relevant.
315 * Fix PCI support for MPC5200 / IceCube Board
317 * Map ISP1362 USB OTG controller for NSCU board
319 * Patch by Brad Parker, 02 Aug 2003:
320 fix sc520_cdp problems
322 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
324 * Allow erase command to cross flash bank boundaries
326 * Patch by Scott McNutt, 21 Jul 2003:
327 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
328 Both LynxOS and BlueCat linux KDIs are supported.
330 * Patch by Richard Woodruff, 25 Jul 2003:
331 use more reliable reset for OMAP/925T
333 * Patch by Nye Liu, 25 Jul 2003:
336 * Patch by Richard Woodruff, 24 Jul 2003:
337 Fixes for cmd_nand.c:
338 - Fixed null dereferece which could result in incorrect ECC values.
339 - Added support for devices with no Ready/Busy signal hooked up.
340 - Added OMAP1510 read/write protect handling.
341 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
343 - Switched default ECC to be JFFS2.
345 * Allow crc32 to be used at address 0x000
347 * Provide consistent interface to standalone applications to access
348 the 'global_data' structure
349 Provide a doc/README.standalone more useful to users/developers.
351 * Make IceCube MGT5100 FEC driver work
353 * Implement new mechanism to export U-Boot's functions to standalone
354 applications: instead of using (PPC-specific) system calls we now
355 use a jump table; please see doc/README.standalone for details
357 * Patch by Dave Westwood, 24 Jul 2003:
358 added support for Unity OS (a proprietary OS)
360 * Patch by Detlev Zundel, 23 Jul 2003:
361 add "imls" command to print flash table of contents
363 * Fix cold boot detection for log buffer reset
365 * Return error for invalid length specifiers with "cp.X" etc.
367 * Fix startup problem on MIPS
369 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
370 bitmap support is configured
372 * Patch by Bill Hargen, 18 Jul 2003:
373 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
375 * Patch by Denis Peter, 18 Jul 2003:
376 - fix memory configuration for MIP405T
377 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
379 * Cleanup of TQM82xx configurations; use "official" board types
380 to make selection easier.
382 * Patch by Martin Krause, 17 Jul 2003:
383 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
385 * Patch by Richard Woodruff, 17 July 03:
386 - Fixed bug in OMAP1510 baud rate divisor settings.
388 * Patch by Nye Liu, 16 July 2003:
390 - add MPC86xADS support (uses MPC86xADS.h)
391 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
393 o BRG changes (EXTAL/XTAL restricted to 10MHz)
394 o don't trust gclk() software measurement by default, depend on
396 - add DRAM SIMM not installed detection
397 - use more "correct" SDRAM initialization sequence
398 - allow different SDRAM sizes (8xxADS has 8M)
400 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
401 - rename MAMR/MBMR defines to be more consistent. Should eventually
402 be merged into MxMR to better reflect the PowerQUICC datasheet.
404 * Patch by Yuli Barcohen, 16 Jul 2003:
405 support new Motorola PQ2FADS-ZU evaluation board which replaced
406 MPC8260ADS and MPC8266ADS
408 ======================================================================
409 Changes for U-Boot 0.4.4:
410 ======================================================================
412 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
414 * Add support for MGT5100 and MPC5200 processors
416 * Patch by Lutz Dennig, 15 Jul 2003:
417 update for R360MPI board
419 ======================================================================
420 Changes for U-Boot 0.4.3:
421 ======================================================================
423 * Patches by Kshitij, 04 Jul 2003
424 - added support for arm925t cpu core
425 - added support for TI OMAP 1510 Innovator Board
427 * Patches by Martin Krause, 14 Jul 2003:
428 - add I2C support for s3c2400 systems (trab board)
429 - (re-) add "ping" to command table
431 * Fix handling of "slow" POST routines
433 * Patches by Yuli Barcohen, 13 Jul 2003:
434 - Correct flash and JFFS2 support for MPC8260ADS
435 - fix PVR values and clock generation for PowerQUICC II family
438 * Patch by Bernhard Kuhn, 08 Jul 2003:
439 - add support for M68K targets
441 * Patch by Ken Chou, 3 Jul:
442 - Fix PCI config table for A3000
443 - Fix iobase for natsemi.c
444 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
446 * Allow to enable "slow" POST routines by key press on power-on
447 * Fix temperature dependend switching of LCD backlight on LWMON
448 * Tweak output format for LWMON
450 * Patch by Stefan Roese, 11 Jul 2003:
451 - Fix bug in CONFIG_VERSION_VARIABLE.
452 - AR405 config updated.
453 - OCRTC/ORSG: bsp command added.
456 ======================================================================
457 Changes for U-Boot 0.4.2:
458 ======================================================================
460 * Add support for NSCU board
462 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
464 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
465 mirror bit flash on TQM8xxM modules
467 * Patch by Kenneth Johansson, 30 Jun 2003:
468 get rid of MK_CMD_ENTRY macro; update doc/README.command
470 * Patch by Seb James, 30 Jun 2003:
471 Improve documentation of I2C configuration in README
473 * Fix problems with previous log buffer "fixes"
475 * Fix minor help text issues
477 * "log append" did not append a newline
479 ======================================================================
480 Changes for U-Boot 0.4.1:
481 ======================================================================
483 * Fix some missing commands, cleanup header files
484 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
486 * Rewrite command lookup and help command (fix problems with bubble
487 sort when sorting command name list). Minor cleanup here and there.
489 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
490 - Allow to call sysmon function interactively
491 - PIC on LWMON board needs delay after power-on
492 - Add missing RSR definitions for MPC8xx
493 - Improve log buffer handling: guarantee clean reset after power-on
494 - Add support for EXBITGEN board (aka "genie")
495 - Add support for SL8245 board
498 - remove trailing white space, trailing empty lines, C++ comments, etc.
499 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
501 * Patches by Kenneth Johansson, 25 Jun 2003:
502 - major rework of command structure
503 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
505 ======================================================================
506 Changes for U-Boot 0.4.0:
507 ======================================================================
509 * Patches by Robert Schwebel, 26 Jun 2003:
510 - csb226 configuration updated
511 - credits for logodl port updated
512 - innokom configuration updated
513 - logodl tree update, still with coding style inconsistencies
514 - added OCM for ppc405 warning to README
516 * Patch by Pantelis Antoniou, 25 Jun 2003:
517 update NetVia with V2 board support
519 * Header file cleanup for ARM
521 * Patch by Murray Jensen, 24 Jun 2003:
522 - make sure to use only U-boot provided header files
523 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
525 * Patch by Stefan Roese, 24 Jun 2003:
526 - Update esd ASH405 board files.
527 - Update esd DASA_SIM config file.
528 - Add ping command to some esd boards.
530 * Patch by Yuli Barcohen, 23 Jun 2003:
531 Update for MPC8260ADS board
533 * Patch by Murray Jensen, 23 Jun 2003:
534 - cleanup of GCC 3.x compiler warnings
536 * Patch by Rune Torgersen, 4 Jun 2003:
537 add large memory support for MPC8266ADS board
539 * Patch by Richard Woodruff, 19 June 03:
540 - Enabled standard u-boot device abstraction for ARM
541 - Enabled console device for ARM
542 - Initilized bi_baudrate for ARM
544 * Patch by Bill Hargen, 23 Apr 2003:
545 fix byte order for 824x I2C addresses (write op)
547 * Patch by Murray Jensen, 20 Jun 2003:
549 - cleanup (especially for gcc-3.x compilers)
551 * Patch by Tom Guilliams, 20 Jun 2003:
552 added CONFIG_750FX support for IBM 750FX processors
554 * Patch by Devin Crumb, 02 Apr 2003:
555 Fix clock divider rounding problem in drivers/serial.c
557 * Patch by Richard Woodruff, 19 June 03:
558 - Fixed smc91c111 driver to sync with the u-boot environment
559 (driver/smc91c111.c).
560 - Added eth_init error return check in NetLoop (net/net.c).
562 * Patch by Ken Chou, 19 June 2003:
563 Added support for A3000 SBC board (Artis Microsystems Inc.)
565 * Patches by Murray Jensen, 17 Jun 2003:
566 - Hymod board database mods: add "who" field and new xilinx chip types
567 - provide new "init_cmd_timeout()" function so code external to
568 "common/main.c" can use the "reset_cmd_timeout()" function before
569 entering the main loop
570 - add DTT support for adm1021 (new file dtt/adm1021.c; config
571 slightly different. see include/configs/hymod.h for an example
572 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
573 CFG_DTT_ADM1021 defined)
574 - add new "eeprom_probe()" function which has similar args and
575 behaves in a similar way to "eeprom_read()" etc.
576 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
577 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
578 - gdbtools copyright update
579 - ensure that set_msr() executes the "sync" and "isync" instructions
580 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
581 - 8260 I/O ports fix: Open Drain should be set last when configuring
582 - add SIU IRQ defines for 8260
583 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
584 config.mk to allow board configurations to override the GNU
585 linker script, selected via the LDSCRIPT, make variable, and to
586 give an initial value to the OBJCFLAGS make variable
587 - 8260 i2c enhancement:
588 o correctly extends the timeout depending on the size of all
589 queued messages for both transmit and receive
590 o will not continue with receive if transmit times out
591 o ensures that the error callback is done for all queued tx
593 o correctly detects both tx and rx timeouts, only delivers one to
594 the callback, and does not overwrite an earlier error
595 o logic in i2c_probe now correct
596 - add "vprintf()" function so that "panic()" function can be
598 - many Hymod board changes
600 * Patches by Robert Schwebel, 14 Jun 2003:
601 - add support for Logotronic DL datalogger board
602 - cleanup serial line after kermit binary download
603 - add debugX macro (debug level support)
604 - update mach-types.h to latest arm.linux.org.uk master list.
606 * Patches by David Müller, 12 Jun 2003:
607 - rewrite of the S3C24X0 register definitions stuff
608 - "driver" for the built-in S3C24X0 RTC
610 * Patches by Yuli Barcohen, 12 Jun 2003:
611 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
612 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
613 configuration word supplied by FPGA on some MPC8260ADS boards
615 * Patch by Pantelis Antoniou, 10 Jun 2003:
616 Unify status LED interface
618 * Add support for DS12887 RTC; add RTC support for ATC board
620 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
621 Modifications for Atmel AT91RM9200DK ARM920T based development kit
622 - Add Atmel DataFlash support for reading and writing.
623 - Add possibility to boot a Linux from DataFlash with BOOTM command.
624 - Add Flash detection on Atmel AT91RM9200DK
625 (between Atmel AT49BV1614 and AT49BV1614A flashes)
626 - Replace old Ethernet PHY layer functions
627 - Change link address
629 * Patch by Frank Smith, 9 Jun 2003:
630 use CRIT_EXCEPTION for machine check on 4xx
632 * Patch by Detlev Zundel, 13 Jun 2003:
633 added implementation of the "carinfo" command in cmd_immap.c
635 * Fix CONFIG_NET_MULTI support in include/net.h
637 * Patches by Kyle Harris, 13 Mar 2003:
638 - Add FAT partition support
639 - Add command support for FAT
640 - Add command support for MMC
642 - Add Intel PXA support for video
643 - Add Intel PXA support for MMC
645 - Enable MMC and FAT for lubbock board
646 - Other misc changes for lubbock board
648 * Patch by Robert Schwebel, April 02, 2003:
649 fix for SMSC91111 driver
651 * Patch by Vladimir Gurevich, 04 Jun 2003:
652 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
654 * Patch by Stefan Roese, 05 Jun 2003:
655 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
656 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
657 data cache can be used even if the chip select is in use.
658 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
659 (see README for further description).
660 - Changed config files of CONFIG_EEPRO100 boards to use the
661 CFG_RX_ETH_BUFFER define.
663 * Add support for RMU board
665 * Add support for TQM862L at 100/50 MHz
667 * Patch by Pantelis Antoniou, 02 Jun 2003:
668 major reconstruction of networking code;
669 add "ping" support (outgoing only!)
671 * Patch by Denis Peter, 04 June 2003:
672 add support for the MIP405T board
674 * Patches by Udi Finkelstein, 2 June 2003:
675 - Added support for custom keyboards, initialized by defining a
676 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
677 - Added support for the RBC823 board.
678 - cpu/mpc8xx/lcd.c now automatically calculates the
679 Horizontal Pixel Count field.
681 * Fix alignment problem in BOOTP (dhcp_leasetime option)
682 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
684 * Patch by Mark Rakes, 14 May 2003:
685 add support for Intel e1000 gig cards.
687 * Patch by Nye Liu, 3 Jun 2003:
688 fix critical typo in MAMR definition (include/mpc8xx.h)
690 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
692 * Patch by Klaus Heydeck, 2 Jun 2003
693 Minor changes for KUP4K configuration
695 * Patch by Marc Singer, 29 May 2003:
696 Fixed rarp boot method for IA32 and other little-endian CPUs.
698 * Patch by Marc Singer, 28 May 2003:
699 Added port I/O commands.
701 * Patch by Matthew McClintock, 28 May 2003
702 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
703 - minor patches for utx8245
705 * Patch by Daniel Engström, 28 May 2003:
708 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
709 add nand flash support to SXNI855T configuration
710 fix/extend nand flash support:
711 - fix 'nand erase' command so does not erase bad blocks
712 - fix 'nand write' command so does not write to bad blocks
713 - fix nand_probe() so handles no flash detected properly
714 - add doc/README.nand
715 - add .jffs2 and .oob options to nand read/write
716 - add 'nand bad' command to list bad blocks
717 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
718 - make NAND read/write faster
720 * Patch by Rune Torgersen, 23 May 2003:
721 Update for MPC8266ADS board
723 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
724 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
725 _time_ (!) if the environment is embedded within the U-Boot image,
726 or in a separate flash sector.
728 * Cleanup CFG_DER #defines in config files (wd maintained only)
730 * Fix data abort exception handling for arm920t CPU
732 * Fix alignment problems with flash driver for TRAB board
734 * Patch by Donald White, 21 May 2003:
735 fix calculation of base address in pci_hose_config_device()
737 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
738 execute "cmd2", even if "cmd1" fails. Note that this is different
739 to "run var1 var2" where the contents of "var2" will NOT be
740 executed when a command in "var1" fails.
742 * Add zero-copy ramdisk support (requires corresponding kernel support!)
744 * Patch by Kyle Harris, 20 May 2003:
745 In preparation for an ixp port, rename cpu/xscale and arch-xscale
746 into cpu/pxa and arch-pxa.
748 * Patch by Stefan Roese, 23 May 2003:
749 - IBM PPC405EP port added.
750 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
751 UART0) is used as default U-Boot console. PPC4xx only!
752 - esd ASH405 board added (PPC405EP based).
753 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
754 - esd CPCI405AB board added.
755 - esd PMC405 board added.
756 - Update of some esd boards.
758 * Patch by Denis Peter, 19 Mai 2003:
759 add support for the MIP405-3 board
761 * Patch by Dave Ellis, 22 May 2003:
762 Fix problem with only partially cleared .bss segment
764 * Patch by Rune Torgersen, 12 May 2003:
765 get PCI to work on a MPC8266ADS board; incorporate change to
766 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
768 * Patch by Nye Liu, 1 May 2003:
769 minor patches for the FADS8xx
771 * Patch by Thomas Schäfer, 28 Apr 2003:
772 Fix SPD handling for 256 ECC DIMM on Walnut
774 * Add support for arbitrary bitmaps for TRAB's VFD command;
775 allow to pass boot bitmap addresses in environment variables;
776 allow for zero boot delay
778 * Patch by Christian Geißinger, 19 May 2002:
779 On TRAB: wait until the dummy byte has been completely sent
781 * Patch by David Updegraff, 22 Apr 2003:
782 update for CrayL1 board
784 * Patch by Pantelis Antoniou, 21 Apr 2003:
785 add boot support for ARTOS (a proprietary OS)
787 * Patch by Steven Scholz, 11 Apr 2003:
788 Add support for RTC DS1338
790 * Patch by Rod Boyce, 24 Jan 2003:
791 Fix counting of extended partitions in diskboot command
793 * Patch by Christophe Lindheimer, 20 May 2003:
794 allow the use of CFG_LOADS when CFG_NO_FLASH is set
796 * Fix SDRAM timing on Purple board
798 * Add support for CompactFlash on ATC board
799 (includes support for Intel 82365 and compatible PC Card controllers,
800 and Yenta-compatible PCI-to-CardBus controllers)
802 * Patch by Mathijs Haarman, 08 May 2003:
803 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
805 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
807 * Add support for Promess ATC board
809 * Patch by Keith Outwater, 28 Apr 2003:
810 - Miscellaneous corrections and additions to GEN860T board specific code.
811 - Added GEN860_SC variant to GEN860T.
812 - Miscellaneous corrections to GEN860T documentation.
813 - Correct duplicate entry in U-Boot CREDITS file.
814 - Add GEN860T_SC entry in MAINTAINERS file.
815 - Update CREDITS file with GEN860T_SC info.
817 * Update Smiths Aerospace addresses in MAINTAINERS file
819 * Fix error handling in hush's version of "run" command
822 - Splashscreen support
825 - temperature dependend enabling of LCD
827 * Allow booting from old "PPCBoot" disk partitions
829 * Add support for TQM8255 Board / MPC8255 CPU
831 ======================================================================
832 Changes for U-Boot 0.3.1:
833 ======================================================================
835 * Make sure Block Lock Bits get cleared in R360MPI flash driver
837 * MPC823 LCD driver: Fill color map backwards, to allow for steady
838 display when Linux takes over
840 * Patch by Erwin Rol, 27 Feb 2003:
841 Add support for RTEMS (this time for real).
843 * Add support for "bmp info" and "bmp display" commands to load
844 bitmap images; this can be used (for example in a "preboot"
845 command) to display a splash screen very quickly after poweron.
847 * Add support for 133 MHz clock on INCA-IP board
849 * Patch by Lutz Dennig, 10 Apr 2003:
850 Update for R360MPI board
852 * Add new meaning to "autostart" environment variable:
853 If set to "no", a standalone image passed to the
854 "bootm" command will be copied to the load address
855 (and eventually uncompressed), but NOT be started.
856 This can be used to load and uncompress arbitrary
859 * Patch by Stefan Roese, 10 Apr 2003:
860 Changed DHCP client to use IP address from server option field #54
861 from the OFFER packet in the server option field #54 in the REQUEST
862 packet. This fixes a problem using a Windows 2000 DHCP server,
863 where the DHCP-server is not the TFTP-server.
865 * Set max brightness for MN11236 displays on TRAB board
867 * Add support for TQM862L modules
869 ======================================================================
870 Changes for U-Boot 0.3.0:
871 ======================================================================
873 * Patch by Arun Dharankar, 4 Apr 2003:
874 Add IDMA example code (tested on 8260 only)
876 * Add support for Purple Board (MIPS64 5Kc)
878 * Add support for MIPS64 5Kc CPUs
880 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
882 * Patch by Denis Peter, 04 Apr 2003:
883 - update MIP405-4 board
885 * Patch by Stefan Roese, 4 Apr 2003:
886 - U-Boot version environment variable "ver" added
887 (CONFIG_VERSION_VARIABLE).
888 - Changed PPC405GPr version from A to B.
889 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
891 * Patches by Denis Peter, 03 April 2003:
892 - fix PCI IRQs on MPL boards
893 - fix two more un-relocated pointer problems
895 * Fix behaviour of "run" command:
896 - print error message iv variable does not exist
897 - terminate processing of arguments in case of error
899 * Patches by Peter Figuli, 10 Mar 2003
900 - Add support for BTUART on PXA platform
901 - Add support for WEP EP250 (PXA) board
903 * Fix flash problems on INCA-IP; add tool to allow bruning images to
904 flash using a BDI2000
906 * Implement fix for I2C Edge Conditions problem for all boards that
907 use the bit-banging driver (common/soft_i2c.c)
909 * Patch by Martin Winistoerfer, 23 Mar 2003
910 - Add port to MPC555/556 microcontrollers
911 - Add support for cmi customer board with
912 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
914 * Patch by Rick Bronson, 28 Mar 2003:
915 - fix common/cmd_nand.c
917 * Patch by Arun Dharankar, 24 Mar 2003:
918 - add threads / scheduler example code
920 * Add patches by Robert Schwebel, 31 Mar 2003:
921 - add ctrl-c support for kermit download
922 - align bdinfo output on ARM
923 - csb226 board: bring in sync with innokom/memsetup.S
924 - csb226 board: fix MDREFR handling
925 - misc doc fixes / extensions
926 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
927 - add BOOT_PROGRESS to armlinux.c
929 * Add CPU ID, version, and clock speed for INCA-IP
931 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
932 - fix SRAM and SDRAM memory sizing
933 - add status LED support
934 - add MAC address for second (SCC1) ethernet port
936 * Update default environment for TQM8260 board
938 * Patch by Rick Bronson, 16 Mar 2003:
939 - Add NAND flash support for reading, writing, and erasing NAND
940 flash (certain forms of which are called SmartMedia).
941 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
943 * Patches by Robert Schwebel, 19 Mar 2003:
944 - use arm-linux-gcc as default compiler for ARM
946 - fix missing baudrate setting
947 - added $loadaddr / CFG_LOAD_ADDR support to loadb
948 - moved "ignoring trailing characters" _before_ u-boot wants to
949 print out diagnostics messages; removes bogus characters at the
952 * Patch by John Zhan, 18 Mar 2003:
953 Add support for SinoVee Microsystems SC8xx boards
955 * Patch by Rolf Offermanns, 21 Mar 2003:
956 ported the dnp1110 related changes from the current armboot cvs to
957 current u-boot cvs. smc91111 does not work. problem marked in
958 smc91111.c, grep for "FIXME".
960 * Patch by Brian Auld, 25 Mar 2003:
961 Add support for STM flash chips on ebony board
963 * Add PCI support for MPC8250 Boards (PM825 module)
965 * Patch by Stefan Roese, 25 Mar 2003:
968 * Patch by Stefan Roese, 20 Mar 2003:
969 - CPCI4052 update (support for revision 3).
970 - Set edge conditioning circuitry on PPC405GPr for compatibility
971 to existing PPC405GP designs.
972 - Clip udiv to 5 bits on PPC405 (serial.c).
974 * Extend INCAIP board support:
975 - add automatic RAM size detection
976 - add "bdinfo" command
977 - pass flash address and size to Linux kernel
978 - switch to 150 MHz clock
980 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
981 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
982 boards, version 153 for Rev. 200 boards).
984 * Patch by Vladimir Gurevich, 12 Mar 2003:
985 Fix relocation problem of statically initialized string pointers
988 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
989 Cleanup & bug fixes for JFFS2 code:
990 - the memory mangement was broken. It caused havoc on malloc by
991 writing beyond the block boundaries.
992 - the length calculation for files was wrong, sometimes resulting
994 - data copying now optionally takes fragment version numbers into
995 account, to avoid copying from older data.
996 See doc/README.JFFS2 for details.
998 * Patch by Josef Wagner, 12 Mar 2003:
999 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
1000 - ETH05 and BEDBUG support for CU824
1001 - added support for MicroSys CPC45
1002 - new BOOTROM/FLASH0 and DOC base for PM826
1004 * Patch by Robert Schwebel, 12 Mar 2003:
1005 Fix the chpart command on innokom board
1008 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
1009 s/PPCBoot/U-Boot/ in some files
1010 s/pImage/uImage/ in some files
1012 * Patch by Detlev Zundel, 15 Jan 2003:
1013 Fix '' command line quoting
1015 * Patch by The LEOX team, 19 Jan 2003:
1016 - add support for the ELPT860 board
1017 - add support for Dallas ds164x RTC
1019 * Patches by David Müller, 31 Jan 2003:
1020 - minimal setup for CardBus bridges
1021 - add EEPROM read/write support in the CS8900 driver
1022 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
1023 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
1025 * Patch by Steven Scholz, 04 Feb 2003:
1026 add support for RTC DS1307
1028 * Patch by Reinhard Meyer, 5 Feb 2003:
1029 fix PLPRCR/SCCR init sequence on 8xx to allow for
1030 changes of EBDF by software
1032 * Patch by Vladimir Gurevich, 07 Feb 2003:
1033 "API-compatibility patch" for 4xx I2C driver
1035 * TRAB fixes / extensions:
1036 - Restore VFD brightness as saved in environment
1037 - add support for Fujitsu flashes
1038 - make sure both buzzers are turned off (drive low level)
1040 * Patches by Robert Schwebel, 06 Mar 2003:
1041 - fix bug in BOOTP code (must use NetCopyIP)
1042 - update of CSB226 port
1043 - clear BSS segment on XScale
1044 - added support for i2c_init_board() function
1045 - update to the Innokom plattform
1047 * Extend support for redundand environments for configurations where
1048 environment size < sector size
1050 * Patch by Rune Torgersen, 13 Feb 2003:
1051 Add support for Motorola MPC8266ADS board
1053 * Patch by Kyle Harris, 19 Feb 2003:
1054 patches for the Intel lubbock board:
1055 memsetup.S - general cleanup (based on Robert's csb226 code)
1056 flash.c - overhaul, actually works now
1057 lubbock.c - fix init funcs to return proper value
1059 * Patch by Kenneth Johansson, 26 Feb 2003:
1060 - Fixed off by one in RFTA calculation.
1061 - No need to abort when LDF is lower than we can program it's only
1062 minimum timing so clamp it to what we can do.
1063 - Takes function pointer to function for reading the spd_nvram. Usefull
1064 for faking data or hardcode a module without the nvram.
1065 - fix other user for above change
1066 - fix some comments.
1068 * Patches by Brian Waite, 26 Feb 2003:
1069 - fix port for evb64260 board
1070 - fix PCI for evb64260 board
1073 * Patch by Reinhard Meyer, 1 Mar 2003:
1074 Add support for EMK TOP860 Module
1076 * Patch by Yuli Barcohen, 02 Mar 2003:
1077 Add SPD EEPROM support for MPC8260ADS board
1079 * Patch by Robert Schwebel, 21 Jan 2003:
1080 - Add support for Innokom board
1081 - Don't complain if "install" fails
1082 - README cleanup (remove duplicated lines)
1083 - Update PXA header files
1085 * Add documentation for existing POST code (doc/README.POST)
1087 * Patch by Laudney Ren, 15 Jan 2003:
1088 Fix handling of redundand environment in "tools/envcrc.c"
1090 * Patch by Detlev Zundel, 28 Feb 2003:
1091 Add bedbug support for 824x systems
1093 * Add support for 16 MB flash configuration of TRAB board
1095 * Patch by Erwin Rol, 27 Feb 2003:
1096 Add support for RTEMS
1098 * Add image information to README
1100 * Patch by Stefan Roese, 18 Feb 2003:
1101 CPCIISER4 configuration updated.
1103 * Patch by Stefan Roese, 17 Feb 2003:
1104 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
1106 * Patch by Stefan Roese, 13 Feb 2003:
1107 Add "pcidelay" environment variable (in ms, enabled via
1108 CONFIG_PCI_BOOTDELAY).
1109 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
1110 RST# to respond to configuration cycles (33MHz -> 1s).
1112 * Fix dual PCMCIA slot support (when running with just one
1115 * Add VFD type detection to trab board
1117 * extend drivers/cs8900.c driver to synchronize ethaddr environment
1118 variable with value in the EEPROM
1120 * Patch by Stefan Roese, 10 Feb 2003:
1121 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
1123 * Add support for MIPS32 4Kc CPUs
1125 * Add support for INCA-IP Board
1127 ======================================================================
1128 Changes for U-Boot 0.2.2:
1129 ======================================================================
1131 * Add dual ethernet support on PM826
1133 * Add support for LXT971 PHY on PM826
1135 * Patch by Tord Andersson, 16 Jan 2003:
1136 Fix flash sector count for TQM8xxL
1138 * Fix I2C EEPROM problem on ICU862 board (would only write the first
1139 16 bytes out of each 32 byte block)
1141 ======================================================================
1142 Changes for U-Boot 0.2.1:
1143 ======================================================================
1145 * Add support for V37 board
1146 (patch by Jón Benediktsson, 11 Dec 2002)
1148 * Update baudrate in bd_info when it gets changed
1150 * Add watchdog trigger points while waiting for serial port
1151 (so far only 8xx -- needed on LWMON with 100ms watchdog)
1153 * Improve command line tool to access the U-Boot's environment
1154 (figuration of the utility, using a config file)
1156 * Add single quote support for (old) command line parser
1158 * Switch LWMON board default config from FRAM to EEPROM;
1159 in POST, EEPROM shows up on 8 addresses
1161 ======================================================================
1162 Changes for U-Boot 0.2.0:
1163 ======================================================================
1165 * Use 1-byte-read instead of -write for iprobe() function
1166 Add i2c commands to PM826 config
1168 * extend I2C POST code: check for list on known addresses
1170 * Improve log buffer code; use "loglevel" to decide which messages
1171 to log on the console, too (like in Linux); get rid of "logstart"
1173 * Add command line tool to access the U-Boot's environment
1174 (board-specific for TRAB now, to be fixed later)
1176 * Patch by Hans-Joerg Frieden, 06 Dec 2002
1177 Fix misc problems with AmigaOne support
1179 * Patch by Chris Hallinan, 3 Dec 2002:
1180 minor cleanup to the MPC8245 EPIC driver
1182 * Patch by Pierre Aubert , 28 Nov 2002
1183 Add support for external (SIU) interrupts on MPC8xx
1185 * Patch by Pierre Aubert , 28 Nov 2002
1186 Fix nested syscalls bug in standalone applications
1188 * Patch by David Müller, 27 Nov 2002:
1189 fix output of "pciinfo" command for CardBus bridge devices.
1191 * Fix bug in TQM8260 board detection - boards got stuck when board ID
1194 * Add LED indication for IDE activity on KUP4K board
1196 * Fix startup problems with VFD display on TRAB
1198 * Patch by Pierre Aubert, 20 Nov 2002
1199 Add driver for Epson SED13806 graphic controller.
1200 Add support for BMP logos in cfb_console driver.
1202 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
1204 * Patch by Rod Boyce, 21 Nov 2002:
1205 fix PCMCIA on MBX8xx board
1207 * Patch by Pierre Aubert , 21 Nov 2002
1208 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
1209 bootmode word in DPRAM configurable
1211 * Patch by Daniel Engström, 18 Nov 2002:
1212 Fixes for x86 port (mostly strings issues)
1214 * Patch by Ken Chou, 18 Nov 2002:
1215 Fix for natsemi NIC cards (DP83815)
1217 * Patch by Pierre Aubert, 19 Nov 2002:
1218 fix a bug for the MII configuration, and some warnings
1220 * Patch by Thomas Frieden, 13 Nov 2002:
1221 Add code for AmigaOne board
1222 (preliminary merge to U-Boot, still WIP)
1224 * Patch by Jon Diekema, 12 Nov 2002:
1225 - Adding URL for IEEE OUI lookup
1226 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
1228 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
1229 root-on-nfs macros are designed to switch how the default boot
1230 method gets defined.
1232 * Patch by Daniel Engström, 13 Nov 2002:
1233 Add support for i386 architecture and AMD SC520 board
1235 * Patch by Pierre Aubert, 12 Nov 2002:
1236 Add support for DOS filesystem and booting from DOS floppy disk
1238 * Patch by Jim Sandoz, 07 Nov 2002:
1239 Increase number of network RX buffers (PKTBUFSRX in
1240 "include/net.h") for EEPRO100 based boards (especially SP8240)
1241 which showed "Receiver is not ready" errors when U-Boot was
1242 processing the receive buffers slower than the network controller
1245 * Patch by Andreas Oberritter, 09 Nov 2002:
1246 Change behaviour of NetLoop(): return -1 for errors, filesize
1247 otherwise; return code 0 is valid an means no file loaded - in this
1248 case the environment still gets updated!
1250 * Patches by Jon Diekema, 9 Nov 2002:
1251 - improve ADC/DAC clocking on the SACSng board to align
1252 the failing edges of LRCLK and SCLK
1253 - sbc8260 configuration tweaks
1254 - add status LED support for 82xx systems
1255 - wire sspi/sspo commands into command handler; improved error
1257 - add timestamp support and alternate memory test to the
1258 SACSng configuration
1260 * Patch by Vince Husovsky, 7 Nov 2002:
1261 Add "-n" to linker options to get rid of "Not enough room for
1262 program headers" problem
1264 * Patch by David Müller, 05 Nov 2002
1265 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
1266 so we can use an already existing name
1268 * Patch by Pierre Aubert, 05 Nov 2002
1269 Hardware relatied improvments in FDC boot code
1271 * Patch by Holger Schurig, 5 Nov 2002:
1272 Make the PXA really change it's frequency
1274 * Patch by Pierre Aubert, 05 Nov 2002
1275 Add support for slave serial Spartan 2 FPGAs
1277 * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
1280 * Add support for log buffer which can be passed to Linux kernel's
1281 syslog mechanism; used especially for POST results.
1283 * Patch by Klaus Heydeck, 31 Oct 2002:
1284 Add initial support for kup4k board
1286 * Patch by Robert Schwebel, 04 Nov 2002:
1287 - use watchdog to reset PXA250 systems
1288 - added progress callbacks to (some of the) ARM code
1289 - update for Cogent CSB226 board
1291 * Add support for FPS860 board
1293 * Patch by Guillaume Alexandre,, 04 Nov 2002:
1294 Improve PCI access on 32-bits Compact PCI bus
1296 * Fix mdelay() on TRAB - this was still the debugging version with
1297 seconds instead of ms.
1299 * Patch by Robert Schwebel, 1 Nov 2002:
1300 XScale related cleanup (affects all ARM boards)
1302 * Cleanup of names and README.
1304 ======================================================================
1305 Notes for U-Boot 0.1.0:
1306 ======================================================================
1308 This is the initial version of "Das U-Boot", the Universal Boot Loader.
1310 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
1311 For information about the history of the project please see the
1312 PPCBoot project page at http://sourceforge.net/projects/ppcboot
1314 ======================================================================