* Patch by Scott McNutt, 04 Oct 2003:
[kernel/u-boot.git] / CHANGELOG
1 ======================================================================
2 Changes for U-Boot 1.0.0:
3 ======================================================================
4
5 * Patch by Scott McNutt, 04 Oct 2003:
6   - add support for Altera Nios-32 CPU
7   - add support for Nios Cyclone Development Kit (DK-1C20)
8
9 * Patch by Steven Scholz, 29 Sep 2003:
10   - A second parameter for bootm overwrites the load address for
11     "Standalone Application" images.
12   - bootm sets environment variable "filesize" to the resulting
13     (uncompressed) data length for "Standalone Application" images
14     when autostart is set to "no". Now you can do something like
15         if bootm $fpgadata $some_free_ram ; then
16                 fpga load 0 $some_free_ram $filesize
17         fi
18
19 * Patch by Denis Peter, 25 Sept 2003:
20   add support for the MIP405 Rev. C board
21
22 * Patch by Yuli Barcohen, 25 Sep 2003:
23   add support for Zephyr Engineering ZPC.1900 board
24
25 * Patch by Anders Larsen, 23 Sep 2003:
26   add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
27   implemented for the x86 architecture)
28
29 * Patch by Sangmoon Kim, 23 Sep 2003:
30   fix pll_pci_to_mem_multiplier table for MPC8245
31
32 * Patch by Anders Larsen, 22 Sep 2003:
33   enable timed autoboot on PXA
34
35 * Patch by David Müller, 22 Sep 2003:
36   - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
37     returns correct libgcc file path
38   - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
39     time on s3c24x0 systems
40
41 * Patch by Jon Diekema, 19 Sep 2003:
42   - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
43     link state to the fault LED.
44   - In NetLoop, make the Fault LED reflect the link status.  The link
45     status gets updated on entry, and on timeouts.
46      
47 * Patch by Anders Larsen, 18 Sep 2003:
48   allow mkimage to build and run on Cygwin-hosted systems
49
50 * Patch by Frank Müller, 18 Sep 2003:
51   use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
52   cpu/mpc8xx/fec.c
53
54 * Patch by Pantelis Antoniou, 16 Sep 2003:
55   add tool to compute fileds in the PLPRCR register for MPC86x
56
57 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
58
59 * Fix build problems under FreeBSD
60
61 * Add generic filesystem image type
62
63 * Make fatload set filesize environment variable
64
65 * enable basic / medium / high-end configurations for PPChameleonEVB
66   board; fix NAND code
67
68 * enable TFTP client code to specify to the server the desired
69   timeout value (see RFC-2349)
70
71 * Improve SDRAM setup for TRAB board
72
73 * Suppress all output with splashscreen configured only if "splashimage"
74   is set
75
76 * Fix problems with I2C support for mpc5200
77
78 * Adapt TRAB configuration and auto_update to new memory layout
79
80 * Add configuration for wtk board
81
82 * Add support for the Sharp LQ065T9DR51U LCD display
83
84 * Patch by Rune Torgersen, 17 Sep 2003:
85   - Fixes for MPC8266 default config
86   - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
87
88 * Patches by Jon Diekema, 17 Sep 2003:
89   - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
90     env_common.c)
91   - sbc8260 tweaks
92   - adjust "help" output
93
94 * Patches by Anders Larsen, 17 Sep 2003:
95   - fix spelling errors
96   - set GD_FLG_DEVINIT flag only after device function pointers
97     are valid
98   - Allow CFG_ALT_MEMTEST on systems where address zero isn't
99     writeable
100   - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
101   - trigger watchdog while waiting in serial driver
102
103 * Add auto-update code for TRAB board using USB memory sticks,
104   support new configuration with more memory
105
106 * disable MPC5200 bus pipelining as workaround for bus contention
107
108 * Modify XLB arbiter priorities on MPC5200 so all devices use same
109   priority; configure critical interrupts to be handled like external
110   interrupts
111
112 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
113   go back to 66 MHz for stability
114
115 * Patches by Jon Diekema, 15 Sep 2003:
116   - add description for missing CFG_CMD_* entries in the README file
117   - sacsng tweaks
118
119 * Patch by Gleb Natapov, 14 Sep 2003:
120   enable watchdog support for all MPC824x boards that have a watchdog
121
122 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
123   "Non-octet Aligned Frame" errors we see at 100 Mbps
124
125 * Patch by Sharad Gupta, 14 Sep 2003:
126   fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
127
128 * Patch by llandre, 11 Sep 2003:
129   update configuration for PPChameleonEVB board
130
131 * Patch by David Müller, 13 Sep 2003:
132   various changes to VCMA9 board specific files
133
134 * Add I2C support for MGT5100 / MPC5200
135
136 * Patch by Rune Torgersen, 11 Sep 2003:
137   Changed default memory option on MPC8266ADS to NOT be Page Based
138   Interleave, since this doesn't work very well with the standard
139   16MB DIMM
140
141 * Patch by George G. Davis, 12 Sep 2003:
142   fix Makefile settings for sk98 driver
143
144 * Patch by Stefan Roese, 12 Sep 2003:
145   - new boards added: DP405, HUB405, PLU405, VOH405
146   - some esd boards updated
147   - cpu/ppc4xx/sdram.c: disable memory controller before setting
148     first values
149   - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
150
151 * Patch by Martin Krause, 11 Sep 2003:
152   add burn-in tests for TRAB board
153
154 * Enable instruction cache on MPC5200 board
155
156 * Patch by Denis Peter, 11 Sep 2003:
157   - fix USB data pointer assignment for bulk only transfer.
158   - prevent to display erased directories in FAT filesystem.
159
160 * Change output format for NAND flash - make it look like for other
161   memory, too
162
163 ======================================================================
164 Changes for U-Boot 0.4.8:
165 ======================================================================
166
167 <<<<<<< CHANGELOG
168 <<<<<<< CHANGELOG
169 <<<<<<< CHANGELOG
170 * Add I2C and RTC support for RMU board
171
172 =======
173 =======
174 =======
175 * Patches by Denis Peter, 9 Sep 2003:
176   add FAT support for IDE, SCSI and USB
177
178 * Patches by Gleb Natapov, 2 Sep 2003:
179   - cleanup of POST code for unsupported architectures
180   - MPC824x locks way0 of data cache for use as initial RAM;
181     this patch unlocks it after relocation to RAM and invalidates
182     the locked entries.
183
184 * Patch by Gleb Natapov, 30 Aug 2003:
185   new I2C driver for mpc107 bridge. Now works from flash.
186
187 * Patch by Dave Ellis, 11 Aug 2003:
188   - JFFS2: fix typo in common/cmd_jffs2.c
189   - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
190   - JFFS2: remove node version 0 warning
191   - JFFS2: accept JFFS2 PADDING nodes
192   - SXNI855T: add AM29LV800 support
193   - SXNI855T: move environment from EEPROM to flash
194   - SXNI855T: boot from JFFS2 in NOR or NAND flash
195
196 * Patch by Bill Hargen, 11 Aug 2003:
197   fixes for I2C on MPC8240
198   - fix i2c_write routine
199   - fix iprobe command
200   - eliminates use of global variables, plus dead code, cleanup.
201
202 * Add support for USB Mass Storage Devices (BBB)
203   (tested with USB memory sticks only)
204
205 * Avoid flicker on TRAB's VFD
206
207 >>>>>>> 1.130
208 * Add support for SK98xx driver
209
210 * Add PCI support for SL8245 board
211
212 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
213   or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
214   Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
215
216 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
217   to allow for more accurate baudrate settings
218   (error now 0.7% at 115 kbps, instead of 3.5% before)
219
220 * Patch by Andreas Mohr, 4 Sep 2003:
221   Fix a lot of spelling errors
222
223 * Add support for PPChameleon Eval Board
224
225 * Add support for P3G4 board
226
227 * Fix problem with MGT5100 FEC driver: add "early" MAC address
228   initialization
229
230 * Patch by Yuli Barcohen, 7 Aug 2003:
231   check BCSR to detect if the board is configured in PCI mode
232
233 ======================================================================
234 Changes for U-Boot 0.4.7:
235 ======================================================================
236
237 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
238   add support for Adder II MPC852T module
239
240 * Patch by George G. Davis, 19 Aug 2003:
241   fix TI Innovator/OMAP1510 pin configs
242
243 * Patches by Kshitij, 18 Aug 2003
244   - add support for arm926ejs cpu core
245   - add support for TI OMAP 1610 Innovator Board
246
247 * Patch by Yuli Barcohen, 14 Aug 2003:
248   add support for bzip2 uncompression
249
250 * Add GCC library to examples/Makefile so GCC utility functions will
251   be resolved, too
252
253 >>>>>>> 1.118
254 * Add I2C and RTC support for RMU board using software I2C driver
255   (because of better response to iprobe command); fix problem with
256   "reset" command
257
258 * Patch by Matthias Fuchs, 28 Aug 2003:
259   Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
260   CONFIG_BOOTP_MAKS (see README).
261
262 >>>>>>> 1.112
263 * Fix ICU862 environment problem
264
265 * Fix RAM size detection for RMU board
266
267 * Implement "reset" for MGT5100/MPC5200 systems
268
269 ======================================================================
270 Changes for U-Boot 0.4.6:
271 ======================================================================
272
273 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
274   allow selection of clock frequency as "make" target
275
276 * Implement memory autosizing code for IceCube boards
277
278 * Configure network port on INCA-IP for autonegotiation
279
280 * Fix overflow problem in network timeout code
281
282 * Patch by Richard Woodruff, 8 Aug 2003:
283   Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
284
285 ======================================================================
286 Changes for U-Boot 0.4.5:
287 ======================================================================
288
289 * Update for TQM board defaults:
290   disable clocks_in_mhz, enable boot count limit
291
292 * Removed tools/gdb from "make all" target.  Added make target "gdbtools"
293   in toplevel directory instead.  Removed astest.c from tools/gdb because
294   it is no longer relevant.
295
296 * Fix PCI support for MPC5200 / IceCube Board
297
298 * Map ISP1362 USB OTG controller for NSCU board
299
300 * Patch by Brad Parker, 02 Aug 2003:
301   fix sc520_cdp problems
302
303 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
304
305 * Allow erase command to cross flash bank boundaries
306
307 * Patch by Scott McNutt, 21 Jul 2003:
308   Add support for LynuxWorks Kernel Downloadable Images (KDIs).
309   Both LynxOS and BlueCat linux KDIs are supported.
310
311 * Patch by Richard Woodruff, 25 Jul 2003:
312   use more reliable reset for OMAP/925T
313
314 * Patch by Nye Liu, 25 Jul 2003:
315   fix typo in mpc8xx.h
316
317 * Patch by Richard Woodruff, 24 Jul 2003:
318   Fixes for cmd_nand.c:
319   - Fixed null dereferece which could result in incorrect ECC values.
320   - Added support for devices with no Ready/Busy signal hooked up.
321   - Added OMAP1510 read/write protect handling.
322   - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
323     for non-JFFS2.
324   - Switched default ECC to be JFFS2.
325
326 * Allow crc32 to be used at address 0x000
327
328 * Provide consistent interface to standalone applications to access
329   the 'global_data' structure
330   Provide a doc/README.standalone more useful to users/developers.
331
332 * Make IceCube MGT5100 FEC driver work
333
334 * Implement new mechanism to export U-Boot's functions to standalone
335   applications: instead of using (PPC-specific) system calls we now
336   use a jump table; please see doc/README.standalone for details
337
338 * Patch by Dave Westwood, 24 Jul 2003:
339   added support for Unity OS (a proprietary OS)
340
341 * Patch by Detlev Zundel, 23 Jul 2003:
342   add "imls" command to print flash table of contents
343
344 * Fix cold boot detection for log buffer reset
345
346 * Return error for invalid length specifiers with "cp.X" etc.
347
348 * Fix startup problem on MIPS
349
350 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
351   bitmap support is configured
352
353 * Patch by Bill Hargen, 18 Jul 2003:
354   - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
355
356 * Patch by Denis Peter, 18 Jul 2003:
357   - fix memory configuration for MIP405T
358   - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
359
360 * Cleanup of TQM82xx configurations; use "official" board types
361   to make selection easier.
362
363 * Patch by Martin Krause, 17 Jul 2003:
364   add delay to get I2C working with "imm" command and s3c24x0_i2c.c
365
366 * Patch by Richard Woodruff, 17 July 03:
367   - Fixed bug in OMAP1510 baud rate divisor settings.
368
369 * Patch by Nye Liu, 16 July 2003:
370   MPC860FADS fixes:
371   - add MPC86xADS support (uses MPC86xADS.h)
372   - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
373     o PLPRCR changes
374     o BRG changes (EXTAL/XTAL restricted to 10MHz)
375     o don't trust gclk() software measurement by default, depend on
376       CONFIG_8xx_GCLK_FREQ
377   - add DRAM SIMM not installed detection
378   - use more "correct" SDRAM initialization sequence
379   - allow different SDRAM sizes (8xxADS has 8M)
380   - default DER is 0
381   - remove unused MAMR defines from FADS860T.h (all done in fads.c)
382   - rename MAMR/MBMR defines to be more consistent. Should eventually
383     be merged into MxMR to better reflect the PowerQUICC datasheet.
384
385 * Patch by Yuli Barcohen, 16 Jul 2003:
386   support new Motorola PQ2FADS-ZU evaluation board which replaced
387   MPC8260ADS and MPC8266ADS
388
389 ======================================================================
390 Changes for U-Boot 0.4.4:
391 ======================================================================
392
393 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
394
395 * Add support for MGT5100 and MPC5200 processors
396
397 * Patch by Lutz Dennig, 15 Jul 2003:
398   update for R360MPI board
399
400 ======================================================================
401 Changes for U-Boot 0.4.3:
402 ======================================================================
403
404 * Patches by Kshitij, 04 Jul 2003
405   - added support for arm925t cpu core
406   - added support for TI OMAP 1510 Innovator Board
407
408 * Patches by Martin Krause, 14 Jul 2003:
409   - add I2C support for s3c2400 systems (trab board)
410   - (re-) add "ping" to command table
411
412 * Fix handling of "slow" POST routines
413
414 * Patches by Yuli Barcohen, 13 Jul 2003:
415   - Correct flash and JFFS2 support for MPC8260ADS
416   - fix PVR values and clock generation for PowerQUICC II family
417     (8270/8275/8280)
418
419 * Patch by Bernhard Kuhn, 08 Jul 2003:
420   - add support for M68K targets
421
422 * Patch by Ken Chou, 3 Jul:
423   - Fix PCI config table for A3000
424   - Fix iobase for natsemi.c
425     (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
426
427 * Allow to enable "slow" POST routines by key press on power-on
428 * Fix temperature dependend switching of LCD backlight on LWMON
429 * Tweak output format for LWMON
430
431 * Patch by Stefan Roese, 11 Jul 2003:
432   - Fix bug in CONFIG_VERSION_VARIABLE.
433   - AR405 config updated.
434   - OCRTC/ORSG: bsp command added.
435   - ASH405 bsp update.
436
437 ======================================================================
438 Changes for U-Boot 0.4.2:
439 ======================================================================
440
441 * Add support for NSCU board
442
443 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
444
445 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
446   mirror bit flash on TQM8xxM modules
447
448 * Patch by Kenneth Johansson, 30 Jun 2003:
449   get rid of MK_CMD_ENTRY macro; update doc/README.command
450
451 * Patch by Seb James, 30 Jun 2003:
452   Improve documentation of I2C configuration in README
453
454 * Fix problems with previous log buffer "fixes"
455
456 * Fix minor help text issues
457
458 * "log append" did not append a newline
459
460 ======================================================================
461 Changes for U-Boot 0.4.1:
462 ======================================================================
463
464 * Fix some missing commands, cleanup header files
465   (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
466
467 * Rewrite command lookup and help command (fix problems with bubble
468   sort when sorting command name list). Minor cleanup here and there.
469
470 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
471   - Allow to call sysmon function interactively
472   - PIC on LWMON board needs delay after power-on
473   - Add missing RSR definitions for MPC8xx
474   - Improve log buffer handling: guarantee clean reset after power-on
475   - Add support for EXBITGEN board (aka "genie")
476   - Add support for SL8245 board
477
478 * Code cleanup:
479   - remove trailing white space, trailing empty lines, C++ comments, etc.
480   - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
481
482 * Patches by Kenneth Johansson, 25 Jun 2003:
483   - major rework of command structure
484     (work done mostly by Michal Cendrowski and Joakim Kristiansen)
485
486 ======================================================================
487 Changes for U-Boot 0.4.0:
488 ======================================================================
489
490 * Patches by Robert Schwebel, 26 Jun 2003:
491   - csb226 configuration updated
492   - credits for logodl port updated
493   - innokom configuration updated
494   - logodl tree update, still with coding style inconsistencies
495   - added OCM for ppc405 warning to README
496
497 * Patch by Pantelis Antoniou, 25 Jun 2003:
498   update NetVia with V2 board support
499
500 * Header file cleanup for ARM
501
502 * Patch by Murray Jensen, 24 Jun 2003:
503   - make sure to use only U-boot provided header files
504   - fix problems with ".rodata.str1.4" section as used by GCC-3.x
505
506 * Patch by Stefan Roese, 24 Jun 2003:
507   - Update esd ASH405 board files.
508   - Update esd DASA_SIM config file.
509   - Add ping command to some esd boards.
510
511 * Patch by Yuli Barcohen, 23 Jun 2003:
512   Update for MPC8260ADS board
513
514 * Patch by Murray Jensen, 23 Jun 2003:
515   - cleanup of GCC 3.x compiler warnings
516
517 * Patch by Rune Torgersen, 4 Jun 2003:
518   add large memory support for MPC8266ADS board
519
520 * Patch by Richard Woodruff, 19 June 03:
521   - Enabled standard u-boot device abstraction for ARM
522   - Enabled console device for ARM
523   - Initilized bi_baudrate for ARM
524
525 * Patch by Bill Hargen, 23 Apr 2003:
526   fix byte order for 824x I2C addresses (write op)
527
528 * Patch by Murray Jensen, 20 Jun 2003:
529   - hymod update
530   - cleanup (especially for gcc-3.x compilers)
531
532 * Patch by Tom Guilliams, 20 Jun 2003:
533   added CONFIG_750FX support for IBM 750FX processors
534
535 * Patch by Devin Crumb, 02 Apr 2003:
536   Fix clock divider rounding problem in drivers/serial.c
537
538 * Patch by Richard Woodruff, 19 June 03:
539   - Fixed smc91c111 driver to sync with the u-boot environment
540     (driver/smc91c111.c).
541   - Added eth_init error return check in NetLoop (net/net.c).
542
543 * Patch by Ken Chou, 19 June 2003:
544   Added support for A3000 SBC board (Artis Microsystems Inc.)
545
546 * Patches by Murray Jensen, 17 Jun 2003:
547   - Hymod board database mods: add "who" field and new xilinx chip types
548   - provide new "init_cmd_timeout()" function so code external to
549     "common/main.c" can use the "reset_cmd_timeout()" function before
550     entering the main loop
551   - add DTT support for adm1021 (new file dtt/adm1021.c; config
552     slightly different. see include/configs/hymod.h for an example
553     (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
554     CFG_DTT_ADM1021 defined)
555   - add new "eeprom_probe()" function which has similar args and
556     behaves in a similar way to "eeprom_read()" etc.
557   - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
558     function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
559   - gdbtools copyright update
560   - ensure that set_msr() executes the "sync" and "isync" instructions
561     after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
562   - 8260 I/O ports fix: Open Drain should be set last when configuring
563   - add SIU IRQ defines for 8260
564   - allow LDSCRIPT override and OBJCFLAGS initialization: change to
565     config.mk to allow board configurations to override the GNU
566     linker script, selected via the LDSCRIPT, make variable, and to
567     give an initial value to the OBJCFLAGS make variable
568   - 8260 i2c enhancement:
569     o correctly extends the timeout depending on the size of all
570       queued messages for both transmit and receive
571     o will not continue with receive if transmit times out
572     o ensures that the error callback is done for all queued tx
573       and rx messages
574     o correctly detects both tx and rx timeouts, only delivers one to
575       the callback, and does not overwrite an earlier error
576     o logic in i2c_probe now correct
577   - add "vprintf()" function so that "panic()" function can be
578     technically correct
579   - many Hymod board changes
580
581 * Patches by Robert Schwebel, 14 Jun 2003:
582   - add support for Logotronic DL datalogger board
583   - cleanup serial line after kermit binary download
584   - add debugX macro (debug level support)
585   - update mach-types.h to latest arm.linux.org.uk master list.
586
587 * Patches by David Müller, 12 Jun 2003:
588   - rewrite of the S3C24X0 register definitions stuff
589   - "driver" for the built-in S3C24X0 RTC
590
591 * Patches by Yuli Barcohen, 12 Jun 2003:
592   - Add MII support and Ethernet PHY initialization for MPC8260ADS board
593   - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
594     configuration word supplied by FPGA on some MPC8260ADS boards
595
596 * Patch by Pantelis Antoniou, 10 Jun 2003:
597   Unify status LED interface
598
599 * Add support for DS12887 RTC; add RTC support for ATC board
600
601 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
602   Modifications for Atmel AT91RM9200DK ARM920T based development kit
603   - Add Atmel DataFlash support for reading and writing.
604   - Add possibility to boot a Linux from DataFlash with BOOTM command.
605   - Add Flash detection on Atmel AT91RM9200DK
606     (between Atmel AT49BV1614 and AT49BV1614A flashes)
607   - Replace old Ethernet PHY layer functions
608   - Change link address
609
610 * Patch by Frank Smith, 9 Jun 2003:
611   use CRIT_EXCEPTION for machine check on 4xx
612
613 * Patch by Detlev Zundel, 13 Jun 2003:
614   added implementation of the "carinfo" command in cmd_immap.c
615
616 * Fix CONFIG_NET_MULTI support in include/net.h
617
618 * Patches by Kyle Harris, 13 Mar 2003:
619   - Add FAT partition support
620   - Add command support for FAT
621   - Add command support for MMC
622   ----
623   - Add Intel PXA support for video
624   - Add Intel PXA support for MMC
625   ----
626   - Enable MMC and FAT for lubbock board
627   - Other misc changes for lubbock board
628
629 * Patch by Robert Schwebel, April 02, 2003:
630   fix for SMSC91111 driver
631
632 * Patch by Vladimir Gurevich, 04 Jun 2003:
633   make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
634
635 * Patch by Stefan Roese, 05 Jun 2003:
636   - PPC4xx: Fix bug for initial stack in data cache as pointed out by
637     Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
638     data cache can be used even if the chip select is in use.
639   - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
640     (see README for further description).
641   - Changed config files of CONFIG_EEPRO100 boards to use the
642     CFG_RX_ETH_BUFFER define.
643
644 * Add support for RMU board
645
646 * Add support for TQM862L at 100/50 MHz
647
648 * Patch by Pantelis Antoniou, 02 Jun 2003:
649   major reconstruction of networking code;
650   add "ping" support (outgoing only!)
651
652 * Patch by Denis Peter, 04 June 2003:
653   add support for the MIP405T board
654
655 * Patches by Udi Finkelstein, 2 June 2003:
656   - Added support for custom keyboards, initialized by defining a
657     board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
658   - Added support for the RBC823 board.
659   - cpu/mpc8xx/lcd.c now automatically calculates the
660     Horizontal Pixel Count field.
661
662 * Fix alignment problem in BOOTP (dhcp_leasetime option)
663   [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
664
665 * Patch by Mark Rakes, 14 May 2003:
666   add support for Intel e1000 gig cards.
667
668 * Patch by Nye Liu, 3 Jun 2003:
669   fix critical typo in MAMR definition (include/mpc8xx.h)
670
671 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
672
673 * Patch by Klaus Heydeck, 2 Jun 2003
674   Minor changes for KUP4K configuration
675
676 * Patch by Marc Singer, 29 May 2003:
677   Fixed rarp boot method for IA32 and other little-endian CPUs.
678
679 * Patch by Marc Singer, 28 May 2003:
680   Added port I/O commands.
681
682 * Patch by Matthew McClintock, 28 May 2003
683   - cpu/mpc824x/start.S: fix relocation code when booting from RAM
684   - minor patches for utx8245
685
686 * Patch by Daniel Engström, 28 May 2003:
687   x86 update
688
689 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
690   add nand flash support to SXNI855T configuration
691   fix/extend nand flash support:
692   - fix 'nand erase' command so does not erase bad blocks
693   - fix 'nand write' command so does not write to bad blocks
694   - fix nand_probe() so handles no flash detected properly
695   - add doc/README.nand
696   - add .jffs2 and .oob options to nand read/write
697   - add 'nand bad' command to list bad blocks
698   - add 'clean' option to 'nand erase' to write JFFS2 clean markers
699   - make NAND read/write faster
700
701 * Patch by Rune Torgersen, 23 May 2003:
702   Update for MPC8266ADS board
703
704 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
705   instead CFG_MONITOR_LEN is now only used to determine  _at_compile_
706   _time_  (!) if the environment is embedded within the U-Boot image,
707   or in a separate flash sector.
708
709 * Cleanup CFG_DER #defines in config files (wd maintained only)
710
711 * Fix data abort exception handling for arm920t CPU
712
713 * Fix alignment problems with flash driver for TRAB board
714
715 * Patch by Donald White, 21 May 2003:
716   fix calculation of base address in pci_hose_config_device()
717
718 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
719   execute "cmd2", even if "cmd1" fails. Note that this is different
720   to "run var1 var2" where the contents of "var2" will NOT be
721   executed when a command in "var1" fails.
722
723 * Add zero-copy ramdisk support (requires corresponding kernel support!)
724
725 * Patch by Kyle Harris, 20 May 2003:
726   In preparation for an ixp port, rename cpu/xscale and arch-xscale
727   into cpu/pxa and arch-pxa.
728
729 * Patch by Stefan Roese, 23 May 2003:
730   - IBM PPC405EP port added.
731   - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
732     UART0) is used as default U-Boot console. PPC4xx only!
733   - esd ASH405 board added (PPC405EP based).
734   - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
735   - esd CPCI405AB board added.
736   - esd PMC405 board added.
737   - Update of some esd boards.
738
739 * Patch by Denis Peter, 19 Mai 2003:
740   add support for the MIP405-3 board
741
742 * Patch by Dave Ellis, 22 May 2003:
743   Fix problem with only partially cleared .bss segment
744
745 * Patch by Rune Torgersen, 12 May 2003:
746   get PCI to work on a MPC8266ADS board; incorporate change to
747   cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
748
749 * Patch by Nye Liu, 1 May 2003:
750   minor patches for the FADS8xx
751
752 * Patch by Thomas Schäfer, 28 Apr 2003:
753   Fix SPD handling for 256 ECC DIMM on Walnut
754
755 * Add support for arbitrary bitmaps for TRAB's  VFD command;
756   allow to pass boot bitmap addresses in environment variables;
757   allow for zero boot delay
758
759 * Patch by Christian Geißinger, 19 May 2002:
760   On TRAB: wait until the dummy byte has been completely sent
761
762 * Patch by David Updegraff, 22 Apr 2003:
763   update for CrayL1 board
764
765 * Patch by Pantelis Antoniou, 21 Apr 2003:
766   add boot support for ARTOS (a proprietary OS)
767
768 * Patch by Steven Scholz, 11 Apr 2003:
769   Add support for RTC DS1338
770
771 * Patch by Rod Boyce, 24 Jan 2003:
772   Fix counting of extended partitions in diskboot command
773
774 * Patch by Christophe Lindheimer, 20 May 2003:
775   allow the use of CFG_LOADS when CFG_NO_FLASH is set
776
777 * Fix SDRAM timing on Purple board
778
779 * Add support for CompactFlash on ATC board
780   (includes support for Intel 82365 and compatible PC Card controllers,
781   and Yenta-compatible PCI-to-CardBus controllers)
782
783 * Patch by Mathijs Haarman, 08 May 2003:
784   Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
785
786 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
787
788 * Add support for Promess ATC board
789
790 * Patch by Keith Outwater, 28 Apr 2003:
791   - Miscellaneous corrections and additions to GEN860T board specific code.
792   - Added GEN860_SC variant to GEN860T.
793   - Miscellaneous corrections to GEN860T documentation.
794   - Correct duplicate entry in U-Boot CREDITS file.
795   - Add GEN860T_SC entry in MAINTAINERS file.
796   - Update CREDITS file with GEN860T_SC info.
797
798 * Update Smiths Aerospace addresses in MAINTAINERS file
799
800 * Fix error handling in hush's version of "run" command
801
802 * LWMON extensions:
803   - Splashscreen support
804   - modem support
805   - sysmon support
806   - temperature dependend enabling of LCD
807
808 * Allow booting from old "PPCBoot" disk partitions
809
810 * Add support for TQM8255 Board / MPC8255 CPU
811
812 ======================================================================
813 Changes for U-Boot 0.3.1:
814 ======================================================================
815
816 * Make sure Block Lock Bits get cleared in R360MPI flash driver
817
818 * MPC823 LCD driver: Fill color map backwards, to allow for steady
819   display when Linux takes over
820
821 * Patch by Erwin Rol, 27 Feb 2003:
822   Add support for RTEMS (this time for real).
823
824 * Add support for "bmp info" and "bmp display" commands to load
825   bitmap images; this can be used (for example in a "preboot"
826   command) to display a splash screen very quickly after poweron.
827
828 * Add support for 133 MHz clock on INCA-IP board
829
830 * Patch by Lutz Dennig, 10 Apr 2003:
831   Update for R360MPI board
832
833 * Add new meaning to "autostart" environment variable:
834   If set to "no", a standalone image passed to the
835   "bootm" command will be copied to the load address
836   (and eventually uncompressed), but NOT be started.
837   This can be used to load and uncompress arbitrary
838   data.
839
840 * Patch by Stefan Roese, 10 Apr 2003:
841   Changed DHCP client to use IP address from server option field #54
842   from the OFFER packet in the server option field #54 in the REQUEST
843   packet. This fixes a problem using a Windows 2000 DHCP server,
844   where the DHCP-server is not the TFTP-server.
845
846 * Set max brightness for MN11236 displays on TRAB board
847
848 * Add support for TQM862L modules
849
850 ======================================================================
851 Changes for U-Boot 0.3.0:
852 ======================================================================
853
854 * Patch by Arun Dharankar, 4 Apr 2003:
855   Add IDMA example code (tested on 8260 only)
856
857 * Add support for Purple Board (MIPS64 5Kc)
858
859 * Add support for MIPS64 5Kc CPUs
860
861 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
862
863 * Patch by Denis Peter, 04 Apr 2003:
864   - update MIP405-4 board
865
866 * Patch by Stefan Roese, 4 Apr 2003:
867   - U-Boot version environment variable "ver" added
868     (CONFIG_VERSION_VARIABLE).
869   - Changed PPC405GPr version from A to B.
870   - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
871
872 * Patches by Denis Peter, 03 April 2003:
873   - fix PCI IRQs on MPL boards
874   - fix two more un-relocated pointer problems
875
876 * Fix behaviour of "run" command:
877   - print error message iv variable does not exist
878   - terminate processing of arguments in case of error
879
880 * Patches by Peter Figuli, 10 Mar 2003
881   - Add support for BTUART on PXA platform
882   - Add support for WEP EP250 (PXA) board
883
884 * Fix flash problems on INCA-IP; add tool to allow bruning images  to
885   flash using a BDI2000
886
887 * Implement fix for I2C Edge Conditions problem for all boards that
888   use the bit-banging driver (common/soft_i2c.c)
889
890 * Patch by Martin Winistoerfer, 23 Mar 2003
891   - Add port to MPC555/556 microcontrollers
892   - Add support for cmi customer board with
893     Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
894
895 * Patch by Rick Bronson, 28 Mar 2003:
896   - fix common/cmd_nand.c
897
898 * Patch by Arun Dharankar, 24 Mar 2003:
899   - add threads / scheduler example code
900
901 * Add patches by Robert Schwebel, 31 Mar 2003:
902   - add ctrl-c support for kermit download
903   - align bdinfo output on ARM
904   - csb226 board: bring in sync with innokom/memsetup.S
905   - csb226 board: fix MDREFR handling
906   - misc doc fixes / extensions
907   - innokom board: cleanup, MDREFR fix in memsetup.S, config update
908   - add BOOT_PROGRESS to armlinux.c
909
910 * Add CPU ID, version, and clock speed for INCA-IP
911
912 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
913   - fix SRAM and SDRAM memory sizing
914   - add status LED support
915   - add MAC address for second (SCC1) ethernet port
916
917 * Update default environment for TQM8260 board
918
919 * Patch by Rick Bronson, 16 Mar 2003:
920   - Add NAND flash support for reading, writing, and erasing NAND
921     flash (certain forms of which are called SmartMedia).
922   - Add support for Atmel AT91RM9200DK ARM920T based development kit.
923
924 * Patches by Robert Schwebel, 19 Mar 2003:
925   - use arm-linux-gcc as default compiler for ARM
926   - fix i2c fixup code
927   - fix missing baudrate setting
928   - added $loadaddr / CFG_LOAD_ADDR support to loadb
929   - moved "ignoring trailing characters" _before_ u-boot wants to
930     print out diagnostics messages; removes bogus characters at the
931     end of transmission
932
933 * Patch by John Zhan, 18 Mar 2003:
934   Add support for SinoVee Microsystems SC8xx boards
935
936 * Patch by Rolf Offermanns, 21 Mar 2003:
937   ported the dnp1110 related changes from the current armboot cvs to
938   current u-boot cvs. smc91111 does not work. problem marked in
939   smc91111.c, grep for "FIXME".
940
941 * Patch by Brian Auld, 25 Mar 2003:
942   Add support for STM flash chips on ebony board
943
944 * Add PCI support for MPC8250 Boards (PM825 module)
945
946 * Patch by Stefan Roese, 25 Mar 2003:
947   - PCI405 update.
948
949 * Patch by Stefan Roese, 20 Mar 2003:
950   - CPCI4052 update (support for revision 3).
951   - Set edge conditioning circuitry on PPC405GPr for compatibility
952     to existing PPC405GP designs.
953   - Clip udiv to 5 bits on PPC405 (serial.c).
954
955 * Extend INCAIP board support:
956   - add automatic RAM size detection
957   - add "bdinfo" command
958   - pass flash address and size to Linux kernel
959   - switch to 150 MHz clock
960
961 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
962   the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
963   boards, version 153 for Rev. 200 boards).
964
965 * Patch by Vladimir Gurevich, 12 Mar 2003:
966   Fix relocation problem of statically initialized string pointers
967   in common/cmd_pci.c
968
969 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
970   Cleanup & bug fixes for JFFS2 code:
971   - the memory mangement was broken. It caused havoc on malloc by
972     writing beyond the block boundaries.
973   - the length calculation for files was wrong, sometimes resulting
974     in short file reads.
975   - data copying now optionally takes fragment version numbers into
976     account, to avoid copying from older data.
977   See doc/README.JFFS2 for details.
978
979 * Patch by Josef Wagner, 12 Mar 2003:
980   - 16/32 MB and 50/80 MHz support with auto-detection for IP860
981   - ETH05 and BEDBUG support for CU824
982   - added support for MicroSys CPC45
983   - new BOOTROM/FLASH0 and DOC base for PM826
984
985 * Patch by Robert Schwebel, 12 Mar 2003:
986   Fix the chpart command on innokom board
987
988 * Name cleanup:
989   mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
990   s/PPCBoot/U-Boot/ in some files
991   s/pImage/uImage/  in some files
992
993 * Patch by Detlev Zundel, 15 Jan 2003:
994   Fix '' command line quoting
995
996 * Patch by The LEOX team, 19 Jan 2003:
997   - add support for the ELPT860 board
998   - add support for Dallas ds164x RTC
999
1000 * Patches by David Müller, 31 Jan 2003:
1001   - minimal setup for CardBus bridges
1002   - add EEPROM read/write support in the CS8900 driver
1003   - add support for the builtin I2C controller in the Samsung s3c24x0 chips
1004   - add support for MPL's VCMA9 (Samsung s3c2410 based) board
1005
1006 * Patch by Steven Scholz, 04 Feb 2003:
1007   add support for RTC DS1307
1008
1009 * Patch by Reinhard Meyer, 5 Feb 2003:
1010   fix PLPRCR/SCCR init sequence on 8xx to allow for
1011   changes of EBDF by software
1012
1013 * Patch by Vladimir Gurevich, 07 Feb 2003:
1014   "API-compatibility patch" for 4xx I2C driver
1015
1016 * TRAB fixes / extensions:
1017   - Restore VFD brightness as saved in environment
1018   - add support for Fujitsu flashes
1019   - make sure both buzzers are turned off (drive low level)
1020
1021 * Patches by Robert Schwebel, 06 Mar 2003:
1022   - fix bug in BOOTP code (must use NetCopyIP)
1023   - update of CSB226 port
1024   - clear BSS segment on XScale
1025   - added support for i2c_init_board() function
1026   - update to the Innokom plattform
1027
1028 * Extend support for redundand environments for configurations where
1029   environment size < sector size
1030
1031 * Patch by Rune Torgersen, 13 Feb 2003:
1032   Add support for Motorola MPC8266ADS board
1033
1034 * Patch by Kyle Harris, 19 Feb 2003:
1035   patches for the Intel lubbock board:
1036   memsetup.S - general cleanup (based on Robert's csb226 code)
1037   flash.c - overhaul, actually works now
1038   lubbock.c - fix init funcs to return proper value
1039
1040 * Patch by Kenneth Johansson, 26 Feb 2003:
1041   - Fixed off by one in RFTA calculation.
1042   - No need to abort when LDF is lower than we can program it's only
1043     minimum timing so clamp it to what we can do.
1044   - Takes function pointer to function for reading the spd_nvram. Usefull
1045     for faking data or hardcode a module without the nvram.
1046   - fix other user for above change
1047   - fix some comments.
1048
1049 * Patches by Brian Waite, 26 Feb 2003:
1050   - fix port for evb64260 board
1051   - fix PCI for evb64260 board
1052   - fix PCI scan
1053
1054 * Patch by Reinhard Meyer, 1 Mar 2003:
1055   Add support for EMK TOP860 Module
1056
1057 * Patch by Yuli Barcohen, 02 Mar 2003:
1058   Add SPD EEPROM support for MPC8260ADS board
1059
1060 * Patch by Robert Schwebel, 21 Jan 2003:
1061   - Add support for Innokom board
1062   - Don't complain if "install" fails
1063   - README cleanup (remove duplicated lines)
1064   - Update PXA header files
1065
1066 * Add documentation for existing POST code (doc/README.POST)
1067
1068 * Patch by Laudney Ren, 15 Jan 2003:
1069   Fix handling of redundand environment in "tools/envcrc.c"
1070
1071 * Patch by Detlev Zundel, 28 Feb 2003:
1072   Add bedbug support for 824x systems
1073
1074 * Add support for 16 MB flash configuration of TRAB board
1075
1076 * Patch by Erwin Rol, 27 Feb 2003:
1077   Add support for RTEMS
1078
1079 * Add image information to README
1080
1081 * Patch by Stefan Roese, 18 Feb 2003:
1082   CPCIISER4 configuration updated.
1083
1084 * Patch by Stefan Roese, 17 Feb 2003:
1085   Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
1086
1087 * Patch by Stefan Roese, 13 Feb 2003:
1088   Add "pcidelay" environment variable (in ms, enabled via
1089   CONFIG_PCI_BOOTDELAY).
1090   PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
1091   RST# to respond to configuration cycles (33MHz -> 1s).
1092
1093 * Fix dual PCMCIA slot support (when running with just one
1094   slot populated)
1095
1096 * Add VFD type detection to trab board
1097
1098 * extend drivers/cs8900.c driver to synchronize  ethaddr  environment
1099   variable with value in the EEPROM
1100
1101 * Patch by Stefan Roese, 10 Feb 2003:
1102   Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
1103
1104 * Add support for MIPS32 4Kc CPUs
1105
1106 * Add support for INCA-IP Board
1107
1108 ======================================================================
1109 Changes for U-Boot 0.2.2:
1110 ======================================================================
1111
1112 * Add dual ethernet support on PM826
1113
1114 * Add support for LXT971 PHY on PM826
1115
1116 * Patch by Tord Andersson, 16 Jan 2003:
1117   Fix flash sector count for TQM8xxL
1118
1119 * Fix I2C EEPROM problem on ICU862 board (would only write the first
1120   16 bytes out of each 32 byte block)
1121
1122 ======================================================================
1123 Changes for U-Boot 0.2.1:
1124 ======================================================================
1125
1126 * Add support for V37 board
1127   (patch by Jón Benediktsson, 11 Dec 2002)
1128
1129 * Update baudrate in bd_info when it gets changed
1130
1131 * Add watchdog trigger points while waiting for serial port
1132   (so far only 8xx -- needed on LWMON with 100ms watchdog)
1133
1134 * Improve command line tool to access the U-Boot's environment
1135   (figuration of the utility, using a config file)
1136
1137 * Add single quote support for (old) command line parser
1138
1139 * Switch LWMON board default config from FRAM to EEPROM;
1140   in POST, EEPROM shows up on 8 addresses
1141
1142 ======================================================================
1143 Changes for U-Boot 0.2.0:
1144 ======================================================================
1145
1146 * Use 1-byte-read instead of -write for iprobe() function
1147   Add i2c commands to PM826 config
1148
1149 * extend I2C POST code: check for list on known addresses
1150
1151 * Improve log buffer code; use "loglevel" to decide which messages
1152   to log on the console, too (like in Linux); get rid of "logstart"
1153
1154 * Add command line tool to access the U-Boot's environment
1155   (board-specific for TRAB now, to be fixed later)
1156
1157 * Patch by Hans-Joerg Frieden, 06 Dec 2002
1158   Fix misc problems with AmigaOne support
1159
1160 * Patch by Chris Hallinan, 3 Dec 2002:
1161   minor cleanup to the MPC8245 EPIC driver
1162
1163 * Patch by Pierre Aubert , 28 Nov 2002
1164   Add support for external (SIU) interrupts on MPC8xx
1165
1166 * Patch by Pierre Aubert , 28 Nov 2002
1167   Fix nested syscalls bug in standalone applications
1168
1169 * Patch by David Müller, 27 Nov 2002:
1170   fix output of "pciinfo" command for CardBus bridge devices.
1171
1172 * Fix bug in TQM8260 board detection - boards got stuck when board ID
1173   was not readable
1174
1175 * Add LED indication for IDE activity on KUP4K board
1176
1177 * Fix startup problems with VFD display on TRAB
1178
1179 * Patch by Pierre Aubert, 20 Nov 2002
1180   Add driver for Epson SED13806 graphic controller.
1181   Add support for BMP logos in cfb_console driver.
1182
1183 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
1184
1185 * Patch by Rod Boyce, 21 Nov 2002:
1186   fix PCMCIA on MBX8xx board
1187
1188 * Patch by Pierre Aubert , 21 Nov 2002
1189   Add CFG_CPM_POST_WORD_ADDR to make the offset of the
1190   bootmode word in DPRAM configurable
1191
1192 * Patch by Daniel Engström, 18 Nov 2002:
1193   Fixes for x86 port (mostly strings issues)
1194
1195 * Patch by Ken Chou, 18 Nov 2002:
1196   Fix for natsemi NIC cards (DP83815)
1197
1198 * Patch by Pierre Aubert, 19 Nov 2002:
1199   fix a bug for the MII configuration, and some warnings
1200
1201 * Patch by Thomas Frieden, 13 Nov 2002:
1202   Add code for AmigaOne board
1203   (preliminary merge to U-Boot, still WIP)
1204
1205 * Patch by Jon Diekema, 12 Nov 2002:
1206   - Adding URL for IEEE OUI lookup
1207   - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
1208     being defined.
1209   - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
1210     root-on-nfs macros are designed to switch how the default boot
1211     method gets defined.
1212
1213 * Patch by Daniel Engström, 13 Nov 2002:
1214   Add support for i386 architecture and AMD SC520 board
1215
1216 * Patch by Pierre Aubert, 12 Nov 2002:
1217   Add support for DOS filesystem and booting from DOS floppy disk
1218
1219 * Patch by Jim Sandoz, 07 Nov 2002:
1220   Increase number of network RX buffers (PKTBUFSRX in
1221   "include/net.h") for EEPRO100 based boards (especially SP8240)
1222   which showed "Receiver is not ready" errors when U-Boot was
1223   processing the receive buffers slower than the network controller
1224   was filling them.
1225
1226 * Patch by Andreas Oberritter, 09 Nov 2002:
1227   Change behaviour of NetLoop(): return -1 for errors, filesize
1228   otherwise; return code 0 is valid an means no file loaded - in this
1229   case the environment still gets updated!
1230
1231 * Patches by Jon Diekema, 9 Nov 2002:
1232   - improve ADC/DAC clocking on the SACSng board to align
1233     the failing edges of LRCLK and SCLK
1234   - sbc8260 configuration tweaks
1235   - add status LED support for 82xx systems
1236   - wire sspi/sspo commands into command handler; improved error
1237     handlering
1238   - add timestamp support and alternate memory test to the
1239     SACSng configuration
1240
1241 * Patch by Vince Husovsky, 7 Nov 2002:
1242   Add "-n" to linker options to get rid of "Not enough room for
1243   program headers" problem
1244
1245 * Patch by David Müller, 05 Nov 2002
1246   Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
1247   so we can use an already existing name
1248
1249 * Patch by Pierre Aubert, 05 Nov 2002
1250   Hardware relatied improvments in FDC boot code
1251
1252 * Patch by Holger Schurig, 5 Nov 2002:
1253   Make the PXA really change it's frequency
1254
1255 * Patch by Pierre Aubert, 05 Nov 2002
1256   Add support for slave serial Spartan 2 FPGAs
1257
1258 * Fix uninitialized memory (MAC  address)  in  8xx  SCC/FEC  ethernet
1259   drivers
1260
1261 * Add support for log buffer which can be passed to Linux kernel's
1262   syslog mechanism; used especially for POST results.
1263
1264 * Patch by Klaus Heydeck, 31 Oct 2002:
1265   Add initial support for kup4k board
1266
1267 * Patch by Robert Schwebel, 04 Nov 2002:
1268   - use watchdog to reset PXA250 systems
1269   - added progress callbacks to (some of the) ARM code
1270   - update for Cogent CSB226 board
1271
1272 * Add support for FPS860 board
1273
1274 * Patch by Guillaume Alexandre,, 04 Nov 2002:
1275   Improve PCI access on 32-bits Compact PCI bus
1276
1277 * Fix mdelay() on TRAB - this was still the debugging version with
1278   seconds instead of ms.
1279
1280 * Patch by Robert Schwebel, 1 Nov 2002:
1281   XScale related cleanup (affects all ARM boards)
1282
1283 * Cleanup of names and README.
1284
1285 ======================================================================
1286 Notes for U-Boot 0.1.0:
1287 ======================================================================
1288
1289 This is the initial version of "Das U-Boot", the Universal Boot Loader.
1290
1291 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
1292 For information about the history of the project please see the
1293 PPCBoot project page at http://sourceforge.net/projects/ppcboot
1294
1295 ======================================================================