1 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
2 Author: Stefan Roese <sr@denx.de>
3 Date: Wed Jan 9 10:38:58 2008 +0100
5 POST: Execute SPR test after relocation
7 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
8 self modifying code and this doesn't work with stack in d-cache, since
9 I can't move the code from d-cache to i-cache. We move the SPR test to
10 be executed a little later, after relocation. Then stack is located in
11 SDRAM and this self-modifying code is no problem anymore.
13 Signed-off-by: Stefan Roese <sr@denx.de>
15 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
16 Author: Stefan Roese <sr@denx.de>
17 Date: Wed Jan 9 10:28:20 2008 +0100
19 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
21 This patch configures the LWMON5 port to use d-cache as init-ram and
22 the unused GPT0_COMP6 as POST WORD storage.
24 Signed-off-by: Stefan Roese <sr@denx.de>
26 commit 1754f50b710194f886b6f2831803d8960171a14d
27 Author: Stefan Roese <sr@denx.de>
28 Date: Wed Jan 9 10:25:46 2008 +0100
30 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
32 The privious 4xx POST implementation only supported storing the POST
33 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
34 we need to store the POST WORD in some other non volatile location.
35 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
38 Signed-off-by: Stefan Roese <sr@denx.de>
40 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
41 Author: Stefan Roese <sr@denx.de>
42 Date: Wed Jan 9 10:23:16 2008 +0100
44 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
46 This patch adds support for locking the init-ram/stack in d-cache,
47 so that other regions may use d-cache as well
49 Note, that this current implementation locks exactly 4k of d-cache,
50 so please make sure that you don't define a bigger init-ram area. Take
51 a look at the lwmon5 440EPx implementation as a reference.
53 Signed-off-by: Stefan Roese <sr@denx.de>
55 commit 0ddb89601a8d29e808db450366752ffdc6267c53
56 Author: Wolfgang Denk <wd@denx.de>
57 Date: Wed Jan 9 10:16:33 2008 +0100
59 Fix memset bug in ext2fs_read_file()
61 ext2fs_read_file() had the function arguments swapped.
63 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
65 Signed-off-by: Wolfgang Denk <wd@denx.de>
67 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
68 Author: Markus Klotzbücher <mk@denx.de>
69 Date: Tue Jan 5 08:17:15 1988 +0100
71 Fix problems with usb storage devices on MPC5200 /TQM5200
73 The MPC5200 OHCI controller operates in big endian, so
74 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
76 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
78 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
79 Author: Wolfgang Denk <wd@denx.de>
80 Date: Tue Jan 8 22:58:27 2008 +0100
82 Fix compile problem with new env code.
84 Signed-off-by: Wolfgang Denk <wd@denx.de>
86 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
87 Author: Markus Klotzbücher <mk@denx.de>
88 Date: Tue Nov 27 10:23:20 2007 +0100
90 tools: fix fw_printenv tool to compile again
92 This patch updates the fw_printenv/fw_setenv userspace tool to include
93 the correct MTD header in order to compile against current kernel
94 headers. Backward compatibility is preserved by introducing an option
95 MTD_VERSION which can be set to "old" for compilation using the old MTD
96 headers. Along with this a number of warnings are fixed.
98 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
100 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
101 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
102 Date: Tue Jan 8 15:40:09 2008 +0100
104 ppc4xx: assign PCI interrupts on seuqoia boards
106 Some operating systems rely on assigned PCI interrupts.
108 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
110 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
111 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
112 Date: Tue Jan 8 15:50:49 2008 +0100
114 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
116 This patch allows the use of 4xx interrupt vector number defines
117 in board specific code outside cpu/ppc4xx.
119 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
121 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
122 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
123 Date: Tue Jan 8 15:39:01 2008 +0100
125 ppc4xx: Fix UIC2 vector number base
127 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
129 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
130 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
131 Date: Tue Jan 8 12:49:58 2008 +0100
133 ppc4xx: Update PLB/PCI divider for PMC440 board
135 This patch updates the PLB/PCI divider when running at
136 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
138 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
140 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
141 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
142 Date: Tue Jan 8 11:13:09 2008 +0100
144 ppc4xx: Disable error message when no NAND chip is installed on PMC440
146 Add CFG_NAND_QUIET_TEST option to disable error message when
147 no NAND chip is installed on PMC440 boards.
149 Disable a couple of config defines that are only used for NAND_U_BOOT.
151 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
153 commit ad3006fe7e84667021753b74247b0bafd97ba35f
154 Author: Gerald Van Baren <vanbaren@cideas.com>
155 Date: Mon Jan 7 23:47:32 2008 -0500
157 LIBFDT: use memmove() instead of memcpy()
159 This is partial patch from the DTC/libfdt
160 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
161 Author: David Gibson <david@gibson.dropbear.id.au>
162 Date: Wed Nov 21 11:56:14 2007 +1100
164 The patch also fixes one genuine bug caught by valgrind -
165 _packblocks() in fdt_rw.c was using memcpy() where it should have been
168 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
170 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
171 Author: David Gibson <david@gibson.dropbear.id.au>
172 Date: Mon Dec 17 14:42:07 2007 +1100
174 libfdt: Add more documentation (patch the seventh)
176 This patch adds more documenting comments to libfdt.h. Specifically,
177 these document the read/write functions (not including fdt_open_into()
178 and fdt_pack(), for now).
180 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
182 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
183 Author: David Gibson <david@gibson.dropbear.id.au>
184 Date: Mon Dec 17 14:41:52 2007 +1100
186 libfdt: Add more documentation (patch the sixth)
188 This patch adds some more documenting comments to libfdt.h.
189 Specifically this documents all the write-in-place functions.
191 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
193 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
194 Author: Gerald Van Baren <vanbaren@cideas.com>
195 Date: Sat Dec 29 22:45:27 2007 -0500
197 Fine grained per property /chosen updating.
199 Implement a suggestion by Scott Wood to make the /chosen handling fine
200 grained. Don't overwrite pre-existing properties on a per-property basis,
201 so if /chosen exists but a necessary /chosen/property doesn't, it gets
202 created. If a /chosen property exists, it is NOT overwritten unless the
203 "force" flag is true.
205 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
207 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
208 Author: Gerald Van Baren <vanbaren@cideas.com>
209 Date: Sat Jan 5 15:33:29 2008 -0500
211 Improve the FDT help message.
213 Add a note that "fdt copy" makes the new address active.
214 Remove most of the extra hints at the end of the fdt help.
216 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
218 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
219 Author: Gerald Van Baren <vanbaren@cideas.com>
220 Date: Sat Jan 5 14:52:04 2008 -0500
222 Support setting FDT properties with optional values.
224 Fix a bug found and documented by Bartlomiej Sieka where the optional
225 value on "fdt set <path> <prop> [<val>]" wasn't optional.
227 => fdt mknode / testnode
228 => fdt print /testnode
231 => fdt set /testnode testprop
232 => fdt print /testnode
237 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
239 commit 22fb2246df91bfc840d87f0c5910818bad55577a
240 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
241 Date: Fri Dec 28 11:56:30 2007 +0100
243 Add fdt_find_and_setprop() to fdt_support.h
245 fdt_find_and_setprop() is used by several 4xx boards and it's
246 missing in the appropriate header. This patch eliminates a
247 warning when building U-Boot for such boards.
249 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
250 Acked-by: Stefan Roese <sr@denx.de>
252 commit 802b769bac17b0560d3535a42c502469ee190cd1
253 Author: Stefan Roese <sr@denx.de>
254 Date: Tue Jan 8 18:39:30 2008 +0100
256 ppc4xx: Return 0 on success in 4xx ethernet driver
258 Signed-off-by: Stefan Roese <sr@denx.de>
260 commit 6775c68683a53c7abc778774641aac6f833a2cbf
261 Author: Kim Phillips <kim.phillips@freescale.com>
262 Date: Tue Jan 8 09:59:49 2008 -0600
264 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
266 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
268 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
269 Author: Kim Phillips <kim.phillips@freescale.com>
270 Date: Thu Dec 20 16:28:34 2007 -0600
272 mpc83xx: rm remaining FLAT_TREE code
274 ..in board pci.c files
276 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
278 commit b3458d2cd55d01732e30a76d898afd99e871cd67
279 Author: Kim Phillips <kim.phillips@freescale.com>
280 Date: Thu Dec 20 15:57:28 2007 -0600
282 mpc83xx: remove FLAT_TREE code
284 need to rm it from pci code, too!
286 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
288 commit 5b8bc606c61456566af6912f818a153b6b06f242
289 Author: Kim Phillips <kim.phillips@freescale.com>
290 Date: Thu Dec 20 14:09:22 2007 -0600
292 mpc83xx: convert to using do_fixup_*()
294 convert to using simpler mpc85xx style fdt update code; streamline by
295 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
296 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
297 converted over to using libfdt).
299 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
301 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
302 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
303 Date: Thu Dec 20 12:58:51 2007 -0500
305 sbc8349: enable libfdt by default on WRS SBC8349 board.
307 Make libfdt the default for the WRS SBC8349 board.
308 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
309 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
311 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
313 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
314 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
315 Date: Thu Dec 20 12:58:16 2007 -0500
317 sbc8349: migrate board to libfdt
319 This adds libfdt support code for the Wind River sbc8349 board.
321 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
322 the other Freescale 83xx boards.
324 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
326 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
327 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
328 Date: Thu Dec 20 12:56:19 2007 -0500
330 sbc8349: Remove board specific ECC code
332 ECC code is now shared for all 83xx boards, so remove board specific one.
333 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
335 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
337 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
338 Author: Kim Phillips <kim.phillips@freescale.com>
339 Date: Thu Dec 20 01:30:48 2007 -0600
341 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
343 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
345 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
347 commit ccf21c311e68d48399eff1e72936052885f6e3f7
348 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
349 Date: Thu Dec 6 16:43:40 2007 +0100
351 Add support CONFIG_UEC_ETH3 in MPC83xx
353 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
355 commit e6af9932d31171e35db880e7b2f29f903b1b7660
356 Author: Kumar Gala <galak@kernel.crashing.org>
357 Date: Mon Nov 26 11:00:54 2007 -0600
359 Remove CONFIG options related to OF that we dont use
361 The MPC8360E MDS config defined:
363 CONFIG_OF_HAS_UBOOT_ENV
365 Which we don't use or ever needed. This seems like copy-paste feature creep.
367 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
369 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
370 Author: Kim Phillips <kim.phillips@freescale.com>
371 Date: Mon Dec 10 14:16:22 2007 -0600
373 mpc83xx: supress compiler warning
375 mpc8360emds.c: In function ‘ft_board_setup’:
376 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
377 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
379 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
381 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
382 Author: Kim Phillips <kim.phillips@freescale.com>
383 Date: Tue Nov 27 14:17:29 2007 -0600
385 mpc83xx: fix remaining fdt_find_node_by_path references
387 rename to fdt_path_offset
389 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
391 commit 921d4b19ad1be704df58725485d9292dc0414adf
392 Author: Kim Phillips <kim.phillips@freescale.com>
393 Date: Mon Nov 19 12:30:09 2007 -0600
395 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
397 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
398 This change guarantees that the environment will be located on the
399 first flash sector after the U-Boot image.
401 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
403 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
404 Author: Kim Phillips <kim.phillips@freescale.com>
405 Date: Fri Nov 9 14:28:08 2007 -0600
407 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
409 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
410 properties in the device tree so the PHY gets configured for internal delay on
411 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
413 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
415 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
416 Author: Dave Liu <r63238@freescale.com>
417 Date: Tue Sep 18 12:41:15 2007 +0800
419 mpc83xx: update the CREDITS and MAINTAINERS
421 update the CREDITS and MAINTAINERS.
423 Signed-off-by: Dave Liu <daveliu@freescale.com>
425 commit b21add4b42af7b767448251b599b91066a160e0d
426 Author: Dave Liu <r63238@freescale.com>
427 Date: Tue Sep 18 12:40:21 2007 +0800
429 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
431 Add the MAINTAINER and MAKEALL entries for mpc837xemds
433 Signed-off-by: Dave Liu <daveliu@freescale.com>
435 commit f8900ce9094c462355eb792eea264ff16ac8fd16
436 Author: Dave Liu <r63238@freescale.com>
437 Date: Tue Sep 18 12:38:53 2007 +0800
439 mpc83xx: Add the MPC837xEMDS board readme
441 Add the README.mpc837xemds to /doc
443 Signed-off-by: Dave Liu <daveliu@freescale.com>
445 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
446 Author: Dave Liu <r63238@freescale.com>
447 Date: Tue Sep 18 12:37:57 2007 +0800
449 mpc83xx: Add the support of MPC837xEMDS board
451 The MPC837xEMDS board support:
452 * DDR2 400MHz hardcoded and SPD init
453 * Local bus NOR Flash
454 * I2C, UART, MII and RTC
458 Signed-off-by: Dave Liu <daveliu@freescale.com>
460 commit 555da61702771fe0f76f3de23b4e7590f3704161
461 Author: Dave Liu <r63238@freescale.com>
462 Date: Tue Sep 18 12:36:58 2007 +0800
464 mpc83xx: Add the support of MPC8315E SoC
466 The MPC8315E SoC including e300c3 core and new IP blocks,
467 such as TDM, PCI Express and SATA controller.
469 Signed-off-by: Dave Liu <daveliu@freescale.com>
471 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
472 Author: Dave Liu <r63238@freescale.com>
473 Date: Tue Sep 18 12:36:11 2007 +0800
475 mpc83xx: Add the support of MPC837x SoC
477 The MPC837x SoC including e300c4 core and new IP blocks,
478 such as SDHC, PCI Express and SATA controller.
480 Signed-off-by: Dave Liu <daveliu@freescale.com>
482 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
483 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
484 Date: Wed Nov 14 18:54:53 2007 +0300
486 MPC8360E-MDS: configure and enable second UART
488 Despite user manual, BCSR9.7 is negated (high) on HRST, so
489 UART2 is disabled. Fix that and configure QE pins properly.
491 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
493 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
494 Author: Timur Tabi <timur@freescale.com>
495 Date: Mon Nov 5 09:34:06 2007 -0600
497 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
499 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
500 currently-defined 83xx boards. This change guarantees that the environment
501 will be located on the first flash sector after the U-Boot image.
503 Signed-off-by: Timur Tabi <timur@freescale.com>
504 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
506 commit e05329516a13616b53240cd85b739217c2bf87f1
507 Author: Larry Johnson <lrj@acm.org>
508 Date: Fri Jan 4 13:27:02 2008 -0500
510 ppc4xx: Remove weak binding from common Denali data-eye search code
512 Now that there are no board-specific versions of
513 "denali_core_search_data_eye()", the weak binding on the common version
516 Signed-off-by: Larry Johnson <lrj@acm.org>
518 commit 5ba576c01602fd328800a427964c36a0a05c5dce
519 Author: Stefan Roese <sr@denx.de>
520 Date: Sat Jan 5 09:13:46 2008 +0100
522 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
524 Signed-off-by: Stefan Roese <sr@denx.de>
526 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
527 Author: Stefan Roese <sr@denx.de>
528 Date: Sat Jan 5 09:12:41 2008 +0100
530 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
532 On Katmai the complete auto-calibration somehow doesn't seem to
533 produce the best results, meaning optimal values for RQFD/RFFD.
534 This was discovered by GDA using a high bandwidth scope,
535 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
536 so now on Katmai "only" RFFD is auto-calibrated.
538 This patch also adds RDCC calibration as mentioned on page 7 of
539 the AMCC PowerPC440SP/SPe DDR2 application note:
540 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
542 Signed-off-by: Stefan Roese <sr@denx.de>
544 commit 49db47b8ae6afff2b898be312948ff501357dc80
545 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
546 Date: Wed Jan 2 16:48:42 2008 +0100
548 ppc4xx: Remove sdram.h from PMC440 board
550 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
552 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
553 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
554 Date: Wed Jan 2 16:48:34 2008 +0100
556 ppc4xx: use common denali core defines and data eye search code for PMC440
558 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
560 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
561 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
562 Date: Wed Jan 2 12:05:14 2008 +0100
564 ppc4xx: More cleanup for esd's LCD code
566 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
568 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
569 Author: Stefan Roese <sr@denx.de>
570 Date: Fri Jan 4 12:00:01 2008 +0100
572 ppc4xx: Fix Sequoia NAND booting target
574 The Sequoia NAND booting target now uses the recently extracted
575 cpu/ppc4xx/denali_data_eye.c file too.
577 Signed-off-by: Stefan Roese <sr@denx.de>
579 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
580 Author: Lawrence R. Johnson <lrj@acm.org>
581 Date: Thu Jan 3 15:02:02 2008 -0500
583 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
585 Signed-off-by: Larry Johnson <lrj@acm.org>
587 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
588 Author: Lawrence R. Johnson <lrj@acm.org>
589 Date: Fri Jan 4 02:11:56 2008 -0500
591 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
593 Note: this patch changes the configuration of some GPIO registers:
595 Register Old Value New Value
596 --------------- ---------- ----------
597 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
598 DCR GPIO0_TSRH 0x55005000 0x00000000
599 DCR GPIO1_TCR 0xC2000000 0xE2000000
600 DCR GPIO1_TSRL 0x0C000000 0x00200000
601 DCR GPIO1_ISR2L 0x00050000 0x00110000
603 Signed-off-by: Larry Johnson <lrj@acm.org>
605 commit 5ab884b254ca2e707ab50545cd705f30108cf491
606 Author: Lawrence R. Johnson <lrj@acm.org>
607 Date: Thu Jan 3 18:54:00 2008 -0500
609 ppc4xx: Add functionality to GPIO support
611 This patch makes two additions to GPIO support:
613 First, it adds function gpio_read_in_bit() to read the a bit from the
614 GPIO Input Register (GPIOx_IR) in the same way that function
615 gpio_read_out_bit() reads a bit from the GPIO Output Register
618 Second, it modifies function gpio_set_chip_configuration() to provide
619 an additional option for configuring the GPIO from the
620 "CFG_4xx_GPIO_TABLE".
622 According to the 440EPx User's Manual, when an alternate output is used,
623 the three-state control is configured in one of two ways, depending on
624 the particular output. The first option is to select the corresponding
625 alternate three-state control in the GPIOx_TRSH/L registers. The second
626 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
627 the GPIOx_TRSH/L registers, and set the corresponding bit in the
628 GPIOx_TCR register to enable the output. For example, the Manual
629 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
630 the alternate three-state control (first option), and specifies
631 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
632 enabled in the GPIOx_TCR register (second option).
634 Currently, gpio_set_chip_configuration() configures all alternate signal
635 outputs to use the first option. This patch allow the second option to
636 be selected by setting the "out_val" element in the table entry to
637 "GPIO_OUT_1". The first option is used when the "out_val" element is
638 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
639 alternate signal is selected, and because all current GPIO tables set
640 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
641 not change any existing configurations.
643 Signed-off-by: Larry Johnson <lrj@acm.org>
645 commit 196404cdc1de495d6182e84731c200fc5748df15
646 Author: Larry Johnson <lrj@arlinx.com>
647 Date: Sun Dec 30 01:01:54 2007 -0500
649 PPC4xx: Remove sdram.h from board/lwmon5
651 These definitions are now in "include/ppc440.h".
653 Signed-off-by: Larry Johnson <lrj@acm.org>
655 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
656 Author: Larry Johnson <lrj@arlinx.com>
657 Date: Sun Dec 30 01:01:32 2007 -0500
659 PPC4xx: Use common code for LWMON5 board SDRAM support
661 This patch also modifies the functionality of the code so that the data-eye
662 search is now done with with the cache disabled.
664 Signed-off-by: Larry Johnson <lrj@acm.org>
666 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
667 Author: Larry Johnson <lrj@arlinx.com>
668 Date: Sun Dec 30 01:01:14 2007 -0500
670 PPC4xx: Remove sdram.h from board/amcc/sequoia
672 These definitions are now in "include/ppc440.h".
674 Signed-off-by: Larry Johnson <lrj@acm.org>
676 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
677 Author: Larry Johnson <lrj@arlinx.com>
678 Date: Sun Dec 30 01:00:50 2007 -0500
680 PPC4xx: Use common code for Sequoia board SDRAM support
682 Signed-off-by: Larry Johnson <lrj@acm.org>
684 commit 8b0c5c127690335758100c25eaec2b84db97c101
685 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
686 Date: Thu Dec 27 16:58:41 2007 +0100
688 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
690 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
691 networking stack does not automatically switch to
692 another interface. This patch does not touch the default
695 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
696 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
698 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
699 Author: Upakul Barkakaty <upakul@gmail.com>
700 Date: Thu Nov 29 12:16:13 2007 +0530
702 NET: Proper return code handling in eth_init() function in file eth.c
704 This patch modifies the return code handling in the eth_init()
705 function, to be compatible with the handling of the return codes in
706 the other network stack files. It now returns a 0 on Success and -1 on
709 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
710 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
712 commit 5ca2d0953e4579a80810966cca2077e20d912c97
713 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
714 Date: Mon Nov 19 20:27:04 2007 +0900
716 net/eth.c: Fix env_enetaddr signed overflow
718 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
721 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
729 Warning: NEC-Candy MAC addresses don't match:
730 Address in SROM is 00:00:4C:80:92:A2
731 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
733 This patch changes env_enetaddr type from `char' to `unsigned char'.
735 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
736 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
737 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
739 commit f85b60710571b37293d2233933b76e2aa3db5635
740 Author: Rafal Jaworowski <raj@semihalf.com>
741 Date: Thu Dec 27 18:19:02 2007 +0100
743 Introduce new eth_receive routine
745 The purpose of this routine is receiving a single network frame, outside of
746 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
747 U-Boot will let them utilise networking facilities. For sending a raw frame
748 the already existing eth_send() can be used.
750 The direct consumer of this routine is the newly introduced API layer for
751 external applications (enabled with CONFIG_API).
753 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
754 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
755 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
757 commit 5c740711f0ea5b51414b341b71597c4a0751be74
758 Author: Jon Loeliger <jdl@freescale.com>
759 Date: Thu Jan 3 10:41:04 2008 -0600
761 8610: Move include of config.h earlier.
763 Include config.h earlier in the set of #includes
764 so as to avoid a incidental and duplicate definition
765 of CFG_CACHELINE_SIZE.
767 Signed-off-by: Jon Loeliger
769 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
770 Author: Jon Loeliger <jdl@freescale.com>
771 Date: Tue Dec 4 10:53:34 2007 -0600
773 Don't slam #undef DEBUG in the 8641HPCN config file.
775 Doing so prevents it from being individually set
776 and useful in other files.
778 Signed-off-by: Jon Loeliger <jdl@freescale.com>
780 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
781 Author: Jon Loeliger <jdl@freescale.com>
782 Date: Wed Nov 28 14:47:18 2007 -0600
784 Convert MPC8641HPCN to use libfdt.
786 Assumes the presence of the aliases node in the DTS to
787 locate the ethernet, pci and serial nodes for fixups.
789 Use consistent fdtaddr and fdtfile in environment variables.
791 Signed-off-by: Jon Loeliger <jdl@freescale.com>
793 commit ce37422d0002e10490e268392e0c4e3028e52cec
794 Author: Stefan Roese <sr@denx.de>
795 Date: Wed Jan 2 14:06:26 2008 +0100
797 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
799 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
800 flash chips connected to a 32bit wide port.
802 Signed-off-by: Stefan Roese <sr@denx.de>
804 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
805 Author: Wolfgang Denk <wd@denx.de>
806 Date: Wed Jan 2 15:58:44 2008 +0100
808 Fix compile problem introduced by "cleanup" commit 3dfd708c
810 Signed-off-by: Wolfgang Denk <wd@denx.de>
812 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
813 Author: Wolfgang Denk <wd@denx.de>
814 Date: Wed Jan 2 15:54:45 2008 +0100
816 Make scripts and Makefiles POSIX compliant
818 The bash builtin versions of the "test" (resp. "[") command allow
819 using "==" for string comparisons, but POSIX compatible implemen-
820 tations (like /usr/bin/test) insist on using "=" only. On such systems
823 $ /usr/bin/test a == a && echo OK
824 /usr/bin/test: ==: binary operator expected
826 This patch fixes Makefiles and scripts to use POSIX style.
828 Signed-off-by: Wolfgang Denk <wd@denx.de>
830 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
831 Author: Wolfgang Denk <wd@denx.de>
832 Date: Wed Jan 2 12:38:43 2008 +0100
834 Minor coding style cleanup.
836 Signed-off-by: Wolfgang Denk <wd@denx.de>
838 commit e174ac34adf5d5653df12bc3cf19c52063a71269
839 Author: Stefan Roese <sr@denx.de>
840 Date: Fri Dec 28 17:29:56 2007 +0100
842 ppc4xx: Coding style cleanup
844 Signed-off-by: Stefan Roese <sr@denx.de>
846 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
847 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
848 Date: Fri Dec 28 17:07:24 2007 +0100
850 ppc4xx: Complete PMC440 board support
852 This patch brings the PMC440 board configuration file.
853 Finally it enables the PMC440 board support.
855 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
857 commit 407843a582560fc5231299561ab3c2b6b6cd3397
858 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
859 Date: Fri Dec 28 17:07:18 2007 +0100
861 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
863 This patch adds some BSP commands and FPGA booting support
864 for esd's PMC440 boards.
866 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
868 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
869 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
870 Date: Fri Dec 28 17:07:14 2007 +0100
872 ppc4xx: Add initial esd PMC440 board files
874 This patch adds the first files for the new esd PMC440 boards.
875 The next two patches will complete the PMC440 board support.
877 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
879 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
880 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
881 Date: Fri Dec 28 17:10:36 2007 +0100
883 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
885 - add EEPROM write protection for esd PLU405 boards.
886 - initialize NAND GPIOs
887 - use correct io accessors
890 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
892 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
893 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
894 Date: Fri Dec 28 17:10:44 2007 +0100
896 ppc4xx: use correct io accessors for esd's LCD code
898 This patch fixes esd's LCD dectection code to work correctly with
901 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
903 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
904 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
905 Date: Fri Dec 28 17:10:42 2007 +0100
907 ppc4xx: Maintenance patch for VOH405 boards
909 - add EEPROM write protection
910 - initialize NAND GPIOs
911 - use correct io accessors
912 - slow down I2C clock to 100kHz
913 - enable ext. I2C bus
916 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
918 commit c05569066dbcba3fdf36d4d1943df265dc316a86
919 Author: Stefan Roese <sr@denx.de>
920 Date: Fri Dec 28 16:08:08 2007 +0100
922 ppc4xx: Enable 405EP PCI arbiter per default on all boards
924 In an attmemt to clean up the 4xx start.S file, I removed the enabling
925 of the internal 405EP PCI arbiter. This is needed for multiple other
926 405EP platforms, like most of the esd 405EP. Now the internal PCI
927 arbiter is enabled again per default as it has been before.
929 Signed-off-by: Stefan Roese <sr@denx.de>
930 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
932 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
933 Author: Stefan Roese <sr@denx.de>
934 Date: Fri Dec 28 15:53:46 2007 +0100
936 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
938 Signed-off-by: Stefan Roese <sr@denx.de>
939 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
941 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
942 Author: Stefan Roese <sr@denx.de>
943 Date: Fri Dec 28 06:06:04 2007 +0100
945 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
947 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
948 platforms mentioned above.
950 Signed-off-by: Stefan Roese <sr@denx.de>
952 commit b568fd25574181a3b12ae3d66b2913903442cb83
953 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
954 Date: Thu Dec 27 17:03:46 2007 +0100
958 This board never left prototyping state and it
959 became a millstone round my neck. So remove it.
961 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
963 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
964 Author: Larry Johnson <lrj@arlinx.com>
965 Date: Thu Dec 27 11:28:51 2007 -0500
967 Add support for Korat PPC440EPx board
969 These patches add support for the PPC440EPx-based "Korat" board to
970 U-Boot. They are based primarily on support for the Sequoia board.
972 Signed-off-by: Larry Johnson <lrj@acm.org>
974 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
975 Author: Larry Johnson <lrj@arlinx.com>
976 Date: Sat Dec 22 15:16:25 2007 -0500
978 Add configuration file for Korat board
980 This patch supplies the configuration file for the Korat PPC440EPx-
983 Signed-off-by: Larry Johnson <lrj@acm.org>
985 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
986 Author: Larry Johnson <lrj@arlinx.com>
987 Date: Sat Dec 22 15:16:11 2007 -0500
989 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
991 Signed-off-by: Larry Johnson <lrj@acm.org>
993 commit aba19604d848b2838cfb9ebe818909e6a216058e
994 Author: Larry Johnson <lrj@arlinx.com>
995 Date: Thu Dec 27 10:54:48 2007 -0500
997 Add 440EPx DDR2 SPD DIMM support
999 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
1000 controller. It should also work on the 440GRx. It is based on the DDR2
1001 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
1003 This code has been tested on prototype Korat boards with three Kingston
1004 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
1005 (two ranks). The Korat board has a single DIMM socket, but support has
1006 been provided (though not tested) for boards with two DIMM sockets.
1008 Signed-off-by: Larry Johnson <lrj@acm.org>
1010 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
1011 Author: Larry Johnson <lrj@arlinx.com>
1012 Date: Sat Dec 22 15:15:30 2007 -0500
1014 Copy 440EPx/GRx SDRAM data-eye search to common directory
1016 This patch creates a non-board-specific file for performing the SDRAM
1017 data-eye search. It also adds ECC error checking to the test of valid
1018 data on readback when ECC is enabled.
1020 Signed-off-by: Larry Johnson <lrj@acm.org>
1022 commit c46f53333b22b1f9098676bea8884fc7db820cf3
1023 Author: Larry Johnson <lrj@arlinx.com>
1024 Date: Sat Dec 22 15:15:13 2007 -0500
1026 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
1028 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
1029 It also fixes two typos in the definitions, so the board-specific
1030 "sdram.h" files containing these definitions are also fixed to avoid
1033 Signed-off-by: Larry Johnson <lrj@acm.org>
1035 commit c348578bf612d0c56d8d376d23cae16defbd86af
1036 Author: Larry Johnson <lrj@arlinx.com>
1037 Date: Thu Dec 27 10:50:55 2007 -0500
1039 Add Ethernet 1000BASE-X support for PPC4xx
1041 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
1042 is defined, the PHY will advertise it's capabilities for autonegotiation
1043 based on the capabilities shown in the PHY's status registers, including
1044 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
1045 advertise hard-coded capabilities, as before.
1047 Signed-off-by: Larry Johnson <lrj@acm.org>
1049 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
1050 Author: Larry Johnson <lrj@arlinx.com>
1051 Date: Thu Dec 27 09:52:17 2007 -0500
1053 Add driver for National Semiconductor LM73 temperature sensor
1055 This driver is based on the driver for the LM75.
1057 Signed-off-by: Larry Johnson <lrj@acm.org>
1059 commit 12618278688ea9b3d76536960a5ad2e3790fac40
1060 Author: Larry Johnson <lrj@arlinx.com>
1061 Date: Sat Dec 22 15:14:00 2007 -0500
1063 Add driver for STMicroelectronics M41T60 RTC
1065 This driver is based on the driver for the M41T11. In the intended
1066 application, the RTC will be powered by a large capacitor, rather than a
1067 battery. The driver therefore checks to see whether the RTC has lost
1068 power. The chip's OUT bit is normally reset from its power-up state. If
1069 the OUT bit is read as set, or if the date and time are not valid, then the
1070 RTC is assumed to have lost power, and its date and time are reset to
1071 1900-01-01 00:00:00.
1073 Support for adjusting the speed of the clock to improve accuracy is
1074 provided through an environment variable.
1076 Signed-off-by: Larry Johnson <lrj@acm.org>
1078 commit d3471173e14b7544bb60339eda8d3d3906694b0a
1079 Author: Larry Johnson <lrj@arlinx.com>
1080 Date: Sat Dec 22 15:34:39 2007 -0500
1082 Use out_be32() and friends to access memory-mapped registers in sequoia.c
1084 Signed-off-by: Larry Johnson <lrj@acm.org>
1086 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
1087 Author: Larry Johnson <lrj@arlinx.com>
1088 Date: Sat Dec 22 15:34:20 2007 -0500
1090 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
1092 Signed-off-by: Larry Johnson <lrj@acm.org>
1094 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
1095 Author: Larry Johnson <lrj@arlinx.com>
1096 Date: Sat Dec 22 15:23:50 2007 -0500
1098 Cosmetic changes to ECC POST for AMCC Denali core
1100 Signed-off-by: Larry Johnson <lrj@acm.org>
1102 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
1103 Author: Stefan Roese <sr@denx.de>
1104 Date: Wed Dec 26 20:20:19 2007 +0100
1106 ppc4xx: Fix compilation problem in 405 cache POST test
1108 Signed-off-by: Stefan Roese <sr@denx.de>
1110 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
1111 Author: Stefan Roese <sr@denx.de>
1112 Date: Sat Dec 22 12:20:09 2007 +0100
1114 ppc4xx: Move virtual address of POST cache test to bigger address
1116 On Sequoia & LWMON5 the virtual address of the POST cache test is now
1117 moved to a bigger address. This enables usage of more memory on those
1120 Signed-off-by: Stefan Roese <sr@denx.de>
1122 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
1123 Author: Stefan Roese <sr@denx.de>
1124 Date: Sat Dec 22 12:18:26 2007 +0100
1126 ppc4xx: Fix problem in 44x cache POST routine
1128 As repoted by Larry Johnson, running "diag run cache" caused a crash
1129 in U-Boot. This problem was introduced by a patch that removed the
1130 TLB entry for the cache test after the test has completed. Since this
1131 TLB was only setup once, a 2nd attempt to run this cache test
1132 failed with a crash. Now this TLB entry is created every time the
1135 Signed-off-by: Stefan Roese <sr@denx.de>
1137 commit b0265b576bb8fa9465f99e99c323768b562fadc2
1138 Author: Stefan Roese <sr@denx.de>
1139 Date: Fri Dec 21 07:51:29 2007 +0100
1141 ppc4xx: Update Makalu fdt support
1143 Signed-off-by: Stefan Roese <sr@denx.de>
1145 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
1146 Author: Stefan Roese <sr@denx.de>
1147 Date: Wed Dec 19 09:05:40 2007 +0100
1149 ppc4xx: Add fdt support to AMCC Katmai eval board
1151 Signed-off-by: Stefan Roese <sr@denx.de>
1153 commit 328a340392a5df9aaf00792be989df73e750859e
1154 Author: Stefan Roese <sr@denx.de>
1155 Date: Tue Dec 18 08:44:51 2007 +0100
1157 ppc4xx: fdt: Cleanup setup of cpu node setup
1159 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
1160 without using the absolute path to the cpu node. This makes it possible
1161 to use this U-Boot version with both versions of cpu-node naming
1162 "cpu@0" and the former "PowerPC,440EPx@0".
1164 Signed-off-by: Stefan Roese <sr@denx.de>
1166 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
1167 Author: Stefan Roese <sr@denx.de>
1168 Date: Mon Dec 17 17:26:21 2007 +0100
1170 ppc4xx: Fix lwmon5 compilation problem
1172 Now that the 440EPx ECC test is not board specific anymore
1173 remove this Makefile.
1175 Signed-off-by: Stefan Roese <sr@denx.de>
1177 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
1178 Author: Anatolij Gustschin <agustschin@t-online.de>
1179 Date: Wed Dec 5 17:43:20 2007 +0100
1181 Fix ppc4xx clear_bss() code
1183 ppc4xx clear_bss() fails if BSS segment size is not
1184 divisible by 4 without remainder. This patch provides
1185 fix for this problem.
1187 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1189 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
1190 Author: Niklaus Giger <niklausgiger@gmx.ch>
1191 Date: Fri Nov 30 18:35:11 2007 +0100
1193 PPC4xx: Minimal changes to add vxWorks support
1195 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1197 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
1198 Author: Markus Klotzbücher <mk@denx.de>
1199 Date: Fri Nov 23 13:09:18 2007 +0100
1201 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
1203 When using dhcp/bootp the "netmask" environment variable is not
1204 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
1205 desireable, so the following patch adds this this option to the board
1208 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
1209 Signed-off-by: Stefan Roese <sr@denx.de>
1211 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
1212 Author: Larry Johnson <lrj@arlinx.com>
1213 Date: Sat Oct 27 12:48:15 2007 -0400
1215 Fix/enhance ECC POST for 440EPx/GRx
1217 This patch allows the ECC POST to be used for different boards with the
1218 PPC440 Denali SDRAM controller. Modifications include skipping the test
1219 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
1220 to prevent timing errors.
1222 Signed-off-by: Larry Johnson <lrj@acm.org>
1224 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
1225 Author: Larry Johnson <lrj@arlinx.com>
1226 Date: Sat Oct 27 12:48:05 2007 -0400
1228 PPC4xx: Move/rename ECC POST for 440EPx/GRx
1230 Signed-off-by: Larry Johnson <lrj@acm.org>
1232 commit c29d2d3680046d430022c55e50fcb27f5866517e
1233 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1234 Date: Fri Dec 14 11:20:33 2007 +0100
1236 ppc4xx: use correct io accessors for 4xx ethernet POST
1238 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1240 commit ba79fde58a48c0a6ff8e2a96caba951594142203
1241 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1242 Date: Fri Dec 14 11:19:56 2007 +0100
1244 ppc4xx: fix flush + invalidate_dcache_range arguments
1246 flush + invalidate_dcache_range() expect the start and stop+1 address.
1247 So the stop address is the first address behind (!) the range.
1249 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1251 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
1252 Author: Stefan Roese <sr@denx.de>
1253 Date: Fri Dec 14 08:41:29 2007 +0100
1255 ppc4xx: fdt: use fdt_fixup_ethernet()
1257 By using aliases in the dts file, the ethernet node fixup is
1258 much easier with the recently added functions.
1260 Please note that the dts file needs the aliases for this to work.
1262 Signed-off-by: Stefan Roese <sr@denx.de>
1264 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
1265 Author: Stefan Roese <sr@denx.de>
1266 Date: Thu Dec 13 14:52:53 2007 +0100
1268 ppc4xx: Bring 4xx fdt support up-to-date
1270 This patch update the 4xx fdt support. It enabled fdt booting
1271 on the AMCC Kilauea and Sequoia for now. More can follow later
1274 Signed-off-by: Stefan Roese <sr@denx.de>
1276 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
1277 Author: Stefan Roese <sr@denx.de>
1278 Date: Thu Dec 27 07:50:54 2007 +0100
1280 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
1282 The check for an sufficiently erased destination was missing in the
1283 buffered write function of the cfi flash driver (when
1284 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
1285 writing to such a region will fail with the currect error message.
1287 Signed-off-by: Stefan Roese <sr@denx.de>
1289 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
1290 Author: Martin Krause <martin.krause@tqs.de>
1291 Date: Mon Nov 12 10:56:17 2007 +0100
1293 Some configuration updates for the TQM5200 based TB5200 board:
1295 - enable command line history
1296 - increase malloc space (because of bigger flash sectors)
1298 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1300 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
1301 Author: Martin Krause <martin.krause@tqs.de>
1302 Date: Thu Sep 27 11:10:08 2007 +0200
1304 TQM8xx: use the CFI flash driver on all TQM8xx boards
1306 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1308 commit 11d9eec479b470eab9242ab937fca70a876d9376
1309 Author: Martin Krause <martin.krause@tqs.de>
1310 Date: Wed Sep 26 17:55:56 2007 +0200
1312 TQM885D: adjust for doubled flash sector size + some minor fixes
1314 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1316 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
1317 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
1318 Date: Wed Sep 26 17:55:54 2007 +0200
1320 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
1322 CAS-Latency=2, Write Recovery Time tWR=2
1323 The max. supported bus frequency is 66 MHz. Therefore, changed
1324 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
1326 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1328 commit b988b8cd443989be65161888eea0127ad03f846f
1329 Author: Martin Krause <martin.krause@tqs.de>
1330 Date: Wed Sep 26 17:55:56 2007 +0200
1332 TQM885D: use calculated cpuclk instead of measuring it
1334 On the TQM885D the measurement of cpuclk with the PIT reference
1335 timer ist not necessary. Since all module variants use the same
1336 external 10 MHz oscillator, the cpuclk only depends on the PLL
1337 configuration - which is readable by software.
1339 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1341 commit 492c7049869348d31168de8dad89651315e468e0
1342 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
1343 Date: Thu Sep 27 14:54:46 2007 +0200
1345 TQM885D: fix SDRAM refresh
1347 At 133 MHz the current SDRAM refresh rate is too fast
1348 (measured 4 * 1.17 us).
1349 CFG_MAMR_PTA changes from 39 to 128. This result
1350 in a refresh rate of 4 * 7.8 us at the default clock
1351 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
1352 This is a compromise until a new method is found to
1353 adjust the refresh rate.
1355 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1357 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
1358 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
1359 Date: Thu Sep 27 14:54:46 2007 +0200
1361 TQM860M: Support for 10col SDRAMs, max. 128 MiB
1363 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1365 commit 61fb15c516fef5631e305f1976d7b3a679725856
1366 Author: Wolfgang Denk <wd@denx.de>
1367 Date: Thu Dec 27 01:52:50 2007 +0100
1369 Fix coding style issues; update CHANGELOG.
1371 Signed-off-by: Wolfgang Denk <wd@denx.de>
1373 commit 467bcee11fe26ad422f2de971aa70866079870f2
1374 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1375 Date: Fri Dec 14 15:36:18 2007 +0100
1377 cfi_flash: Add manufacturer-specific fixups
1379 Run fixups based on the JEDEC manufacturer ID independent of the
1382 This changes current behaviour: Previously, geometry reversal for AMD
1383 chips were done based on the command set ID, while they are now done
1384 based on the JEDEC manufacturer and device ID.
1386 Also add fixup for top-boot Atmel chips. A fixup is needed for
1387 AT49BV6416(T) too, but since u-boot currently only reads the low byte
1388 of the device ID, there's no way to tell it apart from AT49BV642D,
1389 which should not have this fixup. Since AT49BV642D support is
1390 necessary to get ATNGW100 board support into mainline, I've commented
1391 out the fixup for now.
1393 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1395 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
1396 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1397 Date: Fri Dec 14 15:36:17 2007 +0100
1399 cfi_flash: Add cmdset-specific init functions
1401 Move things like reading JEDEC IDs and fixing up geometry reversal
1402 into separate functions. The geometry reversal fixup is now performed
1403 by altering the qry structure directly, which makes the sector init
1404 code slightly cleaner.
1406 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1408 commit e23741f4a6d8047520ef0d4971762749b3587d32
1409 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1410 Date: Fri Dec 14 15:36:16 2007 +0100
1412 cfi_flash: Read whole QRY structure in one go
1414 Read out the whole CFI Standard Query structure after successful cfi
1415 identification. This allows subsequent code to access this information
1416 directly without having to go through flash_read_uchar() and friends.
1418 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1420 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
1421 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1422 Date: Mon Dec 17 11:02:44 2007 +0100
1424 AVR32: Fix logic inversion in disable_interrupts()
1426 disable_interrupts() should return nonzero if interrupts were
1427 _enabled_ before, not disabled.
1429 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1431 commit acac475212cbedb17b321a363a1c878e2b47b37f
1432 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1433 Date: Fri Dec 14 16:51:22 2007 +0100
1435 AVR32: Enable interrupts at bootup
1437 The timer code depends on the timer interrupt to keep track of the
1438 upper 32 bits of the cycle counter. This obviously doesn't work when
1439 interrupts are disabled the whole time.
1441 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1443 commit 9570bcd87f4db255514f43b6701746c412f8fef0
1444 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1445 Date: Thu Nov 15 10:03:45 2007 +0100
1447 AVR32: Fix wrong pin setup for USART3
1449 As reported by Gerhard Berghofer:
1451 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
1452 instead of PB18 and PB19.
1454 which is obviously correct. There's currently no code that uses
1455 USART3, but custom boards may run into problems.
1457 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1459 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
1460 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1461 Date: Thu Nov 1 12:44:20 2007 +0100
1463 README: Remove ATSTK1000 daughterboard list
1465 As noted by Kim Phillips, these lists tend to become out of date.
1467 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1469 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
1470 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1471 Date: Tue Oct 30 14:56:36 2007 +0100
1473 Add ATSTK100[234] to MAINTAINERS
1475 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
1476 "mother". Also update the entry for ATSTK1000 to be not only about the
1477 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
1479 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1481 commit 64ff2357b1727213803591813dbc779c924bf772
1482 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1483 Date: Mon Oct 29 13:02:54 2007 +0100
1485 AVR32: Add support for the ATSTK1004 board
1487 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
1488 which is a derivative of AT32AP7000.
1490 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1492 commit 667568db157f374b85abd7e03596ddd1f0b25681
1493 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1494 Date: Mon Oct 29 13:02:54 2007 +0100
1496 AVR32: Add support for the ATSTK1003 board
1498 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
1499 which is a derivative of AT32AP7000.
1501 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1503 commit 5fee84a794a51ec830548cda485a770efb018b92
1504 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1505 Date: Mon Oct 29 13:23:33 2007 +0100
1507 AVR32: Make some AT32AP700x peripherals optional
1509 Add a chip-features file providing definitions of the form
1511 AT32AP700x_CHIP_HAS_<peripheral>
1513 to indicate the availability of the given peripheral on the currently
1516 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1518 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
1519 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1520 Date: Mon Oct 29 13:09:56 2007 +0100
1522 AVR32: Rename at32ap7000 -> at32ap700x
1524 The SoC-specific code for all the AT32AP700x CPUs is practically
1525 identical; the only difference is that some chips have less features
1526 than others. By doing this rename, we can add support for the AP7000
1527 derivatives simply by making some features conditional.
1529 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1531 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
1532 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1533 Date: Fri Jun 29 18:22:34 2007 +0200
1535 atmel_mci: Show SR when block read fails
1537 Show controller status as well as card status when an error occurs
1540 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1542 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
1543 Author: Stefan Roese <sr@denx.de>
1544 Date: Thu Dec 13 14:52:53 2007 +0100
1546 ppc4xx: Bring 4xx fdt support up-to-date
1548 This patch update the 4xx fdt support. It enabled fdt booting
1549 on the AMCC Kilauea and Sequoia for now. More can follow later
1552 Signed-off-by: Stefan Roese <sr@denx.de>
1554 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
1555 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1556 Date: Thu Dec 13 12:56:34 2007 +0100
1558 cfi_flash: Use map_physmem() and unmap_physmem()
1560 Use map_physmem() and unmap_physmem() to convert from physical to
1561 virtual addresses. This gives the arch a chance to provide an uncached
1562 mapping for flash accesses.
1564 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1566 commit 4d7d6936eb29af7cca330937808312aa5f61454d
1567 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1568 Date: Thu Dec 13 12:56:33 2007 +0100
1570 Introduce map_physmem() and unmap_physmem()
1572 map_physmem() returns a virtual address which can be used to access a
1573 given physical address without involving the cache. unmap_physmem()
1574 should be called when the virtual address returned by map_physmem() is
1577 This patch adds a stub implementation which simply returns the
1578 physical address cast to a uchar * for all architectures except AVR32,
1579 which converts the physical address to an uncached virtual mapping.
1580 unmap_physmem() is a no-op on all architectures, but if any
1581 architecture needs to do such mappings through the TLB, this is the
1582 hook where those TLB entries can be invalidated.
1584 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1586 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
1587 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1588 Date: Thu Dec 13 12:56:32 2007 +0100
1590 cfi_flash: Introduce read and write accessors
1592 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
1593 them to access the flash memory. This makes it clearer when the flash
1594 is actually being accessed; merely dereferencing a volatile pointer
1595 looks just like any other kind of access.
1597 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1599 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
1600 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1601 Date: Thu Dec 13 12:56:31 2007 +0100
1603 Implement __raw_{read,write}[bwl] on all architectures
1605 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
1606 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
1609 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1611 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
1612 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1613 Date: Sat Oct 6 18:55:36 2007 +0200
1615 cfi_flash: Reorder functions and eliminate extra prototypes
1617 Reorder the functions in cfi_flash.c so that each function only uses
1618 functions that have been defined before it. This allows the static
1619 prototype declarations near the top to be eliminated and might allow
1620 gcc to do a better job inlining functions.
1622 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1624 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
1625 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1626 Date: Thu Dec 13 12:56:29 2007 +0100
1628 cfi_flash: Make some needlessly global functions static
1630 Make functions not declared in any header file static.
1632 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1634 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
1635 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1636 Date: Thu Dec 13 12:56:28 2007 +0100
1638 cfi_flash: Break long lines
1640 This patch tries to keep all lines in the cfi_flash driver below 80
1641 columns. There are a few lines left which don't fit this requirement
1642 because I couldn't find any trivial way to break them (i.e. it would
1643 take some restructuring, which I intend to do in a later patch.)
1645 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1647 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
1648 Author: Bartlomiej Sieka <tur@semihalf.com>
1649 Date: Tue Dec 11 13:59:57 2007 +0100
1651 CFI: synchronize command offsets with Linux CFI driver
1653 Fixes non-working CFI Flash on the Inka4x0 board.
1655 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1657 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
1658 Author: Kumar Gala <galak@kernel.crashing.org>
1659 Date: Fri Dec 7 12:17:34 2007 -0600
1661 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
1663 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
1664 (MPC8544DS, MPC8548CDS, MPC8568MDS).
1666 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1668 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
1669 Author: Kumar Gala <galak@kernel.crashing.org>
1670 Date: Fri Dec 7 12:04:30 2007 -0600
1672 Update Freescale MPC85xx ADS/CDS/MDS board config
1674 * Enabled CONFIG_CMD_ELF
1676 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1678 commit d435793229ce29a42797c1edc39f5b34f987f91a
1679 Author: Kumar Gala <galak@kernel.crashing.org>
1680 Date: Fri Dec 7 04:59:26 2007 -0600
1682 Handle Asynchronous DDR clock on 85xx
1684 The MPC8572 introduces the concept of an asynchronous DDR clock with
1685 regards to the platform clock.
1687 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
1690 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1692 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
1693 Author: Kumar Gala <galak@kernel.crashing.org>
1694 Date: Thu Nov 29 10:34:28 2007 -0600
1696 Update Freescale MPC85xx ADS/CDS/MDS board config
1698 * Removed some misc environment setup
1699 * Enabled CONFIG_CMDLINE_EDITING
1701 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1703 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
1704 Author: Kumar Gala <galak@kernel.crashing.org>
1705 Date: Thu Nov 29 10:47:44 2007 -0600
1707 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
1709 Minor path corrections needed to ensure buildability.
1711 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1713 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
1714 Author: Kumar Gala <galak@kernel.crashing.org>
1715 Date: Thu Nov 29 10:16:18 2007 -0600
1717 Move the MPC8540 ADS board under board/freescale.
1719 Minor path corrections needed to ensure buildability.
1721 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1723 commit 870ceac5b3a3486c109396e005af81ae762b5710
1724 Author: Kumar Gala <galak@kernel.crashing.org>
1725 Date: Thu Nov 29 10:14:50 2007 -0600
1727 Move the MPC8560 ADS board under board/freescale.
1729 Minor path corrections needed to ensure buildability.
1731 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1733 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
1734 Author: Kumar Gala <galak@kernel.crashing.org>
1735 Date: Thu Nov 29 10:13:47 2007 -0600
1737 Move the MPC8568 MDS board under board/freescale.
1739 Minor path corrections needed to ensure buildability.
1741 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1743 commit a853d56c59b33415304531443633808736acfc6e
1744 Author: Kumar Gala <galak@kernel.crashing.org>
1745 Date: Thu Nov 29 02:18:59 2007 -0600
1747 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
1749 We already had defines for LAWAR_TRGT_IF_* that we should use
1750 rather than creating new ones. Also, added some missing defines for
1753 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1755 commit 04db400892da37b76a585e332a0c137954ad2015
1756 Author: Kumar Gala <galak@kernel.crashing.org>
1757 Date: Thu Nov 29 02:10:09 2007 -0600
1759 Stop using immap_t on 85xx
1761 In the future the offsets to various blocks may not be in same location.
1762 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
1763 instead of getting it via &immap.
1765 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1767 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
1768 Author: Kumar Gala <galak@kernel.crashing.org>
1769 Date: Thu Nov 29 01:23:09 2007 -0600
1771 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
1773 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1775 commit c480861bf000156e6a3e932c258db59ff2212dd3
1776 Author: Kumar Gala <galak@kernel.crashing.org>
1777 Date: Thu Nov 29 01:06:19 2007 -0600
1779 Update MPC8568 MDS to use libfdt
1781 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
1782 ethernet, pci, and serial for the various fixups that are done.
1784 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1786 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
1787 Author: Haiying Wang <Haiying.Wang@freescale.com>
1788 Date: Wed Nov 14 15:52:06 2007 -0500
1790 Add PCI Express support on MPC8568MDS
1792 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1793 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1795 commit b90d25497625b90ffa3f2911a0895ca237556ff5
1796 Author: Kumar Gala <galak@kernel.crashing.org>
1797 Date: Thu Nov 29 00:11:44 2007 -0600
1799 Update MPC85xx CDS to use libfdt
1801 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
1802 ethernet, pci, and serial for the various fixups that are done.
1804 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1806 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
1807 Author: Kumar Gala <galak@kernel.crashing.org>
1808 Date: Wed Nov 28 22:54:27 2007 -0600
1810 Update MPC8540 ADS to use libfdt
1812 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
1813 ethernet, pci, and serial for the various fixups that are done.
1815 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1817 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
1818 Author: Kumar Gala <galak@kernel.crashing.org>
1819 Date: Wed Nov 28 22:40:31 2007 -0600
1821 Update MPC8560 ADS to use libfdt
1823 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
1824 ethernet, pci, and serial for the various fixups that are done.
1826 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1828 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
1829 Author: Kumar Gala <galak@kernel.crashing.org>
1830 Date: Wed Nov 28 00:36:33 2007 -0600
1832 Stop using immap_t for cpm offset on 85xx
1834 In the future the offsets to various blocks may not be in same location.
1835 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
1836 instead of getting it via &immap->im_cpm.
1838 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1840 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
1841 Author: Kumar Gala <galak@kernel.crashing.org>
1842 Date: Tue Nov 27 23:25:02 2007 -0600
1844 Stop using immap_t for guts offset on 85xx
1846 In the future the offsets to various blocks may not be in same location.
1847 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
1848 instead of getting it via &immap->im_gur.
1850 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1852 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
1853 Author: Kumar Gala <galak@kernel.crashing.org>
1854 Date: Tue Nov 27 22:42:34 2007 -0600
1856 Update MPC8544 DS config
1858 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
1859 * Removed some misc environment setup
1860 * Moved to using fdtfile & fdtaddr as fdt env var names
1861 * Enabled CONFIG_CMDLINE_EDITING
1863 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1865 commit addce57e2e4c49e77ffb2020a84690713bb18b47
1866 Author: Kumar Gala <galak@kernel.crashing.org>
1867 Date: Mon Nov 26 17:12:24 2007 -0600
1869 Update MPC8544DS to use libfdt
1871 Updated the MPC8544DS config to use libfdt and assume use of aliases for
1872 ethernet, pci, and serial for the various fixups that are done.
1874 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1876 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
1877 Author: Kumar Gala <galak@kernel.crashing.org>
1878 Date: Thu Nov 29 00:15:30 2007 -0600
1880 Add libfdt based ft_cpu_setup for mpc85xx
1882 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1884 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
1885 Author: Stefan Roese <sr@denx.de>
1886 Date: Tue Dec 11 13:38:19 2007 +0100
1888 ppc4xx: Correct GPIO offset in gpio_config()
1890 Thanks to Gary Jennejohn for pointing this out.
1892 Signed-off-by: Stefan Roese <sr@denx.de>
1894 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
1895 Author: Stefan Roese <sr@denx.de>
1896 Date: Tue Dec 11 11:46:01 2007 +0100
1898 rtc: Fix merging problem
1900 Signed-off-by: Stefan Roese <sr@denx.de>
1902 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
1903 Author: Stefan Roese <sr@denx.de>
1904 Date: Sat Dec 8 14:47:34 2007 +0100
1906 ppc4xx: 405EX: Correctly enable USB pins
1908 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
1909 function control) registers. This is done for the AMCC Kilauea and
1912 Signed-off-by: Stefan Roese <sr@denx.de>
1914 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
1915 Author: Stefan Roese <sr@denx.de>
1916 Date: Sat Dec 8 08:25:09 2007 +0100
1918 CFI: Coding style cleanup
1920 Signed-off-by: Stefan Roese <sr@denx.de>
1922 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
1923 Author: Michael Schwingen <michael@schwingen.org>
1924 Date: Fri Dec 7 23:35:02 2007 +0100
1926 CFI: support JEDEC flash roms in CFI-flash framework
1928 The following patch adds support for non-CFI flash ROMS, by hooking into the
1929 CFI flash code and using most of its code, as recently discussed here in the
1930 thread "Mixing CFI and non-CFI flashs".
1932 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1933 Signed-off-by: Stefan Roese <sr@denx.de>
1935 commit c01b17dd856fa120b2970f50d9598546a4927ec3
1936 Author: Gerald Van Baren <vanbaren@cideas.com>
1937 Date: Wed Nov 28 21:24:50 2007 -0500
1939 Conditionally compile fdt_fixup_ethernet()
1941 Fix compiler warnings: On boards that don't have ethernets defined,
1942 don't compile fdt_fixup_ethernet().
1944 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
1945 Author: Kumar Gala <galak@kernel.crashing.org>
1946 Date: Tue Nov 27 21:59:46 2007 -0600
1948 Convert boards that set memory node to use fdt_fixup_memory()
1950 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1952 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
1953 Author: Kumar Gala <galak@kernel.crashing.org>
1954 Date: Mon Nov 26 17:06:15 2007 -0600
1956 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
1958 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
1959 determine which serial alias we should set linux,stdout-path to.
1961 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1963 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
1964 Author: Kumar Gala <galak@kernel.crashing.org>
1965 Date: Mon Nov 26 14:57:45 2007 -0600
1967 Add common memory fixup function
1969 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
1971 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1973 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
1974 Author: Kumar Gala <galak@kernel.crashing.org>
1975 Date: Mon Nov 26 11:19:12 2007 -0600
1977 Conditionally compile fdt_support.c
1979 Modify common/Makefile to conditionally compile fdt_support.c based
1980 on CONFIG_OF_LIBFDT.
1982 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1984 commit d88e7ba0980773479e1a64badb293116071b7ef0
1985 Author: Kumar Gala <galak@kernel.crashing.org>
1986 Date: Mon Nov 26 10:41:40 2007 -0600
1988 Fix build breakage due to libfdt import
1990 The IDS8247 got lost in the update and need an API update
1991 do to rename of functions in libfdt.
1993 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1995 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
1996 Author: Gerald Van Baren <vanbaren@cideas.com>
1997 Date: Fri Nov 23 19:43:20 2007 -0500
1999 Add spaces around the = in the fdt print format.
2001 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2003 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
2004 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2005 Date: Fri Dec 7 01:25:38 2007 +0900
2007 sh: Moved driver of the SuperH dependence
2009 The composition of the directory in the drivers/ changed.
2010 I moved SuperH serial driver and marubun PCMCIA driver.
2012 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
2015 Author: Wolfgang Denk <wd@denx.de>
2016 Date: Thu Dec 6 10:21:19 2007 +0100
2020 Signed-off-by: Wolfgang Denk <wd@denx.de>
2022 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
2023 Author: Wolfgang Denk <wd@denx.de>
2024 Date: Thu Dec 6 10:21:03 2007 +0100
2026 ADS5121 Board: fix compile problem.
2028 Signed-off-by: Wolfgang Denk <wd@denx.de>
2030 commit a27044b14a9e93678a82d7b35f202b93e7687abc
2031 Author: Stefan Roese <sr@denx.de>
2032 Date: Thu Dec 6 05:58:43 2007 +0100
2034 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
2036 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
2037 setting the FIXD bit in the SDR0_MFR register. Here a description of the
2041 ------------------------------
2042 If a DMA is performed between memory and PCI with the DMA 1 Controller
2043 using prefetch, and as a result uses a special purpose buffer selected by
2044 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
2045 the first part of the transfer sequence is performed twice. The
2046 PPC440SPe PCI Controller requests more data than was needed such that in
2047 the case of enforce memory protection, a host CPU exception can occur.
2048 No data is corrupted, because data transfer is stopped in the PCI
2049 Controller. Prefetch enable is specified by setting DMA Configuration
2050 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
2052 Behavior that may be observed in a running system
2053 ---------------------------------------------------------------------------
2055 1. DMA performance is decreased because of the double access on the PCI bus
2057 2. If an illegal access to some address on the PCI bus is detected at the
2058 system level, a machine check or similar system error may occur.
2060 Workarounds Available
2061 ----------------------------------
2063 1. Do not program prefetch. Note that a prefetch command cannot be programmed
2064 without selecting a special purpose buffer.
2065 2. To avoid crossing a physical boundary of the PCI slave device, add 512
2066 bytes of address to the PCI address range.
2068 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
2069 from AMCC and slighly changed.
2071 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
2072 Signed-off-by: Stefan Roese <sr@denx.de>
2074 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
2075 Author: Stefan Roese <sr@denx.de>
2076 Date: Tue Dec 4 16:29:48 2007 +0100
2078 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
2080 Signed-off-by: Stefan Roese <sr@denx.de>
2082 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
2083 Author: Wolfgang Denk <wd@denx.de>
2084 Date: Mon Dec 3 00:15:28 2007 +0100
2086 Prepare for 1.3.1-rc1
2088 Signed-off-by: Wolfgang Denk <wd@denx.de>
2090 commit e15e33433e7c05111968dc9b434a52fd42cbd221
2091 Author: Stefan Roese <sr@denx.de>
2092 Date: Fri Nov 30 07:15:41 2007 +0100
2094 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
2096 This manual PCIe reset triggering solves the problem seen with the
2097 Intel EPRO/1000 card, which was not detected (link not established)
2098 upon power-up reset.
2100 Signed-off-by: Stefan Roese <sr@denx.de>
2102 commit 260eea5676ca46903a335686cc020b29c4ca46fe
2103 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2104 Date: Thu Nov 29 01:21:54 2007 +0900
2106 sh: Add SuperH boards maintainer to MAINTAINERS file
2108 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
2110 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2112 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
2113 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2114 Date: Thu Nov 29 00:13:04 2007 +0900
2116 sh: Add ms7750se support in MAKEALL
2118 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2120 commit c7144373427a178332bf9754131c8c34c52c200a
2121 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2122 Date: Tue Nov 27 09:44:53 2007 +0100
2124 sh: Add sh3 and sh4 support in MAKEALL
2126 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2127 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2129 commit 130080874a3d28450098481a262c5f7c855e908d
2130 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2131 Date: Sun Nov 25 02:51:17 2007 +0900
2133 sh: Add document for SuperH.
2135 This document is a summary of information concerning SuperH of U-Boot.
2137 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2139 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
2140 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2141 Date: Sun Nov 25 02:39:31 2007 +0900
2143 sh: Add marubun's pcmcia driver
2145 Marubun pcmcia is a chip for PCMCIA used with SuperH.
2146 Of course, this can be used even by other architectures.
2147 When use this driver, came to be able to use CompactFlash
2150 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2152 commit febd86b969b975289ed948f1ac0eb9722da41ced
2153 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2154 Date: Sun Nov 25 02:32:13 2007 +0900
2156 sh: Update SuperH SCIF driver
2158 - Changed volatile unsigned to vu_.
2159 - Changed Makefile for kconfig.
2161 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2163 commit 8be760903645af09871be50ad0a6f9ebb62b311d
2164 Author: Stefan Roese <sr@denx.de>
2165 Date: Tue Nov 27 11:57:35 2007 +0100
2167 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
2169 After an error in the AMCC 405EX users manual now correctly configure
2170 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
2173 Signed-off-by: Stefan Roese <sr@denx.de>
2175 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
2176 Author: Wolfgang Denk <wd@denx.de>
2177 Date: Mon Nov 26 19:18:21 2007 +0100
2179 Cleanup coding style; update CHANGELOG
2181 Signed-off-by: Wolfgang Denk <wd@denx.de>
2183 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
2184 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2185 Date: Sun Nov 25 22:39:25 2007 +0100
2187 MAKEALL: add missing 512x boards in ppc
2189 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2191 commit a340c325e668ca7386c2276387681720be9c3757
2192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2193 Date: Sun Nov 25 18:45:47 2007 +0100
2195 Makefile : fix tags ctags etags with new drivers organization
2197 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2199 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
2200 Author: Stefan Roese <sr@denx.de>
2201 Date: Mon Nov 26 15:06:14 2007 +0100
2203 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
2205 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
2208 Signed-off-by: Stefan Roese <sr@denx.de>
2210 commit ca1ce226287270bb01e25b8e3674c701f12edf19
2211 Author: Stefan Roese <sr@denx.de>
2212 Date: Mon Nov 26 15:01:45 2007 +0100
2214 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
2216 Signed-off-by: Stefan Roese <sr@denx.de>
2218 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
2219 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2220 Date: Sun Nov 25 18:45:47 2007 +0100
2222 Makefile : fix tags ctags etags with new drivers organization
2224 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2226 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
2227 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2228 Date: Sat Nov 24 21:26:56 2007 +0100
2230 drivers/mtd : move mtd drivers to drivers/mtd
2232 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2234 commit 318c0b90431f2648552e5ade78833f42652ce859
2235 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2236 Date: Sat Nov 24 21:17:55 2007 +0100
2238 drivers/misc : move misc drivers to drivers/misc
2240 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2242 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
2243 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2244 Date: Sat Nov 24 21:13:59 2007 +0100
2246 drivers/block : move block drivers to drivers/block
2248 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2250 commit 0c698dcaa70275eb8814f665b545547cee013892
2251 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2252 Date: Sat Nov 24 20:59:50 2007 +0100
2254 drivers/rtc : move rtc drivers to drivers/rtc
2256 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2258 commit f868cc5a50757d94f36c312395481cb0f187d9e6
2259 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2260 Date: Sat Nov 24 20:14:44 2007 +0100
2262 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
2264 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2266 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
2267 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2268 Date: Sat Nov 24 19:46:45 2007 +0100
2270 drivers/input : move input drivers to drivers/input
2272 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2274 commit e4558666293364fc3af1c1d9381ca933fa0f1275
2275 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2276 Date: Sat Nov 24 19:40:11 2007 +0100
2278 drivers/usb : move usb drivers to drivers/usb
2280 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2282 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
2283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2284 Date: Sat Nov 24 19:33:38 2007 +0100
2286 drivers/serial : move serial drivers to drivers/serial
2288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2290 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
2291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2292 Date: Wed Nov 21 21:19:24 2007 +0100
2294 drivers/net : move net drivers to drivers/net
2296 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2298 commit 352d259130b349fe9593b8dada641bd78a9659e5
2299 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2300 Date: Tue Nov 20 20:41:48 2007 +0100
2302 drivers/video : move video drivers to drivers/video
2304 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2306 commit 73646217186aa17afc8e305c5f06f06dd335eaad
2307 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2308 Date: Tue Nov 20 20:33:09 2007 +0100
2310 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
2312 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2314 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
2315 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2316 Date: Tue Nov 20 20:28:09 2007 +0100
2318 drivers/pci : move pci drivers to drivers/pci
2320 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2322 commit 9162352817579840d7802da6d85872b3ca003c97
2323 Author: Gerald Van Baren <vanbaren@cideas.com>
2324 Date: Thu Nov 22 17:23:23 2007 -0500
2326 Fix fdt printing for updated libfdt
2328 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
2330 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2332 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
2333 Author: Kumar Gala <galak@kernel.crashing.org>
2334 Date: Wed Nov 21 13:30:15 2007 -0600
2336 Add additional fdt fixup helper functions
2338 Added the following fdt fixup helpers:
2339 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
2340 * do_fixup_by_compat{_u32} - Find matching nodes by compat
2342 The _u32 variants work the same only the property they are setting
2343 is know to be a 32-bit integer instead of a byte buffer.
2345 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2347 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
2348 Author: Kumar Gala <galak@kernel.crashing.org>
2349 Date: Wed Nov 21 11:11:03 2007 -0600
2351 Add fdt_fixup_ethernet helper to set mac addresses
2353 Added a fixup helper that uses aliases to set mac addresses
2354 in the device tree based on the bd_t
2356 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2358 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
2359 Author: Kumar Gala <galak@kernel.crashing.org>
2360 Date: Wed Nov 21 14:07:46 2007 -0600
2362 Fix warnings from import of libfdt
2364 cmd_fdt.c: In function fdt_print:
2365 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
2366 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
2367 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
2368 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
2370 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2372 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
2373 Author: Kumar Gala <galak@kernel.crashing.org>
2374 Date: Wed Oct 24 11:04:22 2007 -0500
2376 Update libfdt from device tree compiler (dtc)
2378 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
2379 the device tree compiler (dtc) project.
2381 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2383 commit e93becf80d732b64aef81b23e8b6ece02c40533d
2384 Author: Kumar Gala <galak@kernel.crashing.org>
2385 Date: Sat Nov 3 19:46:28 2007 -0500
2387 Move do_fixup* for libfdt into common code
2389 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
2390 into common/fdt_support.c and renamed:
2392 do_fixup() -> do_fixup_by_path()
2393 do_fixup_u32() -> do_fixup_by_path_u32()
2395 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2397 commit f738b4a75998f42a7408defadc9baac7a31c92db
2398 Author: Kumar Gala <galak@kernel.crashing.org>
2399 Date: Thu Oct 25 16:15:07 2007 -0500
2401 Make no options to fdt print default to '/'
2403 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2405 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
2406 Author: Kumar Gala <galak@kernel.crashing.org>
2407 Date: Wed Oct 24 10:21:57 2007 -0500
2409 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
2412 fdt_node_is_compatible
2413 fdt_find_node_by_type
2414 fdt_find_compatible_node
2416 To ease merge of newer libfdt as we aren't using them anywhere at this time.
2418 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
2421 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2423 commit 98e2867cc85409b919f862e6c16026461ec955df
2424 Author: Grant Likely <grant.likely@secretlab.ca>
2425 Date: Wed Nov 21 09:19:37 2007 -0700
2427 [BUILD] Remove libraries when updating autoconf.mk
2429 Fix library problems caused by conditional compilation. Using
2430 autoconf.mk to decide which files to compile has caused a problem when
2431 changing configuration from one board to another without clearing out
2432 the library (*.a) files.
2434 It used to be that the linker was always passed the same list of .o
2435 files when building the .a files. However, that is not longer true
2436 with conditional compilation. Now, a different board config will have
2437 a different file list passed to the linker. The problem occurs when
2438 a library has already been built and the board config is changed.
2440 Since the linker will update instead of replace a preexisting library,
2441 then if the file list changes to remove some object files the old
2442 objects will still exist in the library.
2444 The solution is to remove all old library files when autoconf.mk is
2447 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2449 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
2450 Author: Kumar Gala <galak@kernel.crashing.org>
2451 Date: Wed Nov 21 08:49:50 2007 -0600
2453 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
2455 Modify libfdt/Makefile to conditionally compile the *.c files based
2456 on the board config.
2458 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2460 commit 4a43719a7738712811d822ca8125427b27a55cdc
2461 Author: Grant Likely <grant.likely@secretlab.ca>
2462 Date: Mon Sep 24 09:05:31 2007 -0600
2464 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
2466 Modify common/Makefile to conditionally compile the cmd_*.c files based
2467 on the board config.
2469 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2471 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
2472 Author: Grant Likely <grant.likely@secretlab.ca>
2473 Date: Mon Sep 24 09:05:31 2007 -0600
2475 [BUILD] Generate include/autoconf.mk from board config files
2477 Use cpp and sed to postprocess config.h and import the defined values
2478 into include/autoconf.mk. autoconf.mk is then included by config.mk to
2479 give 'make' access to the board configuration.
2481 Doing this enables conditional compilation at the Makefile level instead
2482 of by wrapping every .c file with #ifdef/#endif wrappers.
2484 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2486 commit 68b88999da87ab88e71e1306192905be3450198e
2487 Author: Jon Loeliger <jdl@freescale.com>
2488 Date: Tue Nov 20 15:02:26 2007 -0600
2490 8610HPCD: Enable the 8610 Display Interface Unit
2492 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2494 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
2495 Author: Jon Loeliger <jdl@freescale.com>
2496 Date: Tue Nov 20 15:00:53 2007 -0600
2498 Move 8610 DIU interface structure definitions to header file.
2500 These two structures are still needed during the
2501 initialization and setup of the DIU hardware.
2502 So move them to the fsl_diu_fb.h file for now.
2505 Noticed-by: York Sun <yorksun@freescale.com>
2506 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2508 commit 080c646dbf474a109c3f85718fb01ce042a38c45
2509 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2510 Date: Tue Nov 20 20:14:18 2007 +0100
2512 drivers/i2c : move i2c drivers to drivers/i2c
2514 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2516 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
2517 Author: Wolfgang Denk <wd@denx.de>
2518 Date: Mon Nov 19 22:20:24 2007 +0100
2520 Prepare for 1.3.0 release.
2522 Signed-off-by: Wolfgang Denk <wd@denx.de>
2524 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
2525 Author: Haiying Wang <Haiying.Wang@freescale.com>
2526 Date: Mon Nov 19 10:02:13 2007 -0500
2528 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
2530 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
2532 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2534 commit f8c320609366176b31104d9bf5e295232e1c7f1d
2535 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2536 Date: Mon Nov 19 11:14:16 2007 +0900
2538 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
2540 lowlevel_init.S: Assembler messages:
2541 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
2543 Looking at codes, the `memtest' and `clearmem' are intentional mixed
2544 use of `global symbols' and `label' for debugging purpose. To make it
2545 build, just disable global-symbols-use for now. As a result `memtest'
2546 still remains as unused, but leave it be...
2548 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2550 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
2551 Author: Wolfgang Denk <wd@denx.de>
2552 Date: Mon Nov 19 12:59:14 2007 +0100
2554 Fix build problems with mp2usb board
2556 Signed-off-by: Wolfgang Denk <wd@denx.de>
2558 commit 6bf4c686afca1e86e1c384d59218f914605713bf
2559 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2560 Date: Sun Nov 18 18:36:11 2007 +0100
2562 s3c24x0: Fix usb_ohci.c missing in Makefile
2563 and usb_ohci.c warning differ in signedness
2565 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2567 commit 6073f61e078da5ddb521b56256bcc36508589883
2568 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2569 Date: Sun Nov 18 12:55:02 2007 +0100
2571 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
2573 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2575 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
2576 Author: Wolfgang Denk <wd@denx.de>
2577 Date: Sun Nov 18 17:11:09 2007 +0100
2579 Fix compiler warnings for ARM systems.
2581 Signed-off-by: Wolfgang Denk <wd@denx.de>
2583 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
2584 Author: Wolfgang Denk <wd@denx.de>
2585 Date: Sun Nov 18 16:36:27 2007 +0100
2587 Fix compiler warnings for PPC systems. Update CHANGELOG.
2589 Signed-off-by: Wolfgang Denk <wd@denx.de>
2591 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
2592 Author: Stefan Roese <sr@denx.de>
2593 Date: Sun Nov 18 14:44:44 2007 +0100
2595 ppc4xx: Correct 405EX PCIe UTL register mapping
2597 Map 4k mem space for UTL registers for each port.
2599 Signed-off-by: Stefan Roese <sr@denx.de>
2601 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
2602 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2603 Date: Sat Nov 17 11:31:10 2007 +0100
2605 Fix warning differ in signedness in net/net.c and net/nfs.c
2607 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
2608 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2609 Date: Sat Nov 17 20:42:45 2007 +0900
2611 gth2.c: Fix a warning on gth2 build.
2613 gth2.c: In function 'misc_init_r':
2614 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
2616 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2618 commit 2309c130aa4c84b91bd874a41269c923eb61b555
2619 Author: Stefan Roese <sr@denx.de>
2620 Date: Sat Nov 17 07:58:25 2007 +0100
2622 Fix warning differ in signedness in common/cmd_scsi.c
2624 Signed-off-by: Stefan Roese <sr@denx.de>
2626 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
2627 Author: Stefan Roese <sr@denx.de>
2628 Date: Sat Nov 17 14:52:29 2007 +0100
2630 ppc4xx: Update AMCC Kilauea config file
2632 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
2634 Signed-off-by: Stefan Roese <sr@denx.de>
2636 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
2637 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2638 Date: Sat Nov 17 20:05:26 2007 +0900
2640 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
2642 Current trick to pick up GNU assembler minor version does not work with the
2643 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
2646 $ sde-as --version |grep "GNU assembler"
2647 GNU assembler 2.15.94 mipssde-6.02.02-20050602
2648 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
2650 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
2654 $ mips-linux-as --version |grep "GNU assembler"
2655 GNU assembler (GNU Binutils) 2.18
2656 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
2658 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
2662 As a result of above, you'll see many noises with such binutils:
2665 /bin/sh: line 0: [: : integer expression expected
2666 /bin/sh: line 0: [: : integer expression expected
2667 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
2668 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
2669 /bin/sh: line 0: [: : integer expression expected
2670 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
2671 /bin/sh: line 0: [: : integer expression expected
2672 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
2673 /bin/sh: line 0: [: : integer expression expected
2675 This patch simplifies the trick and makes it work with both versions of gas.
2676 I also replace an expensive `awk (or gawk)' with `cut'.
2678 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2680 commit 16664f72850846e645616da1c0fa5afcd6d15f15
2681 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2682 Date: Sat Nov 17 20:05:26 2007 +0900
2684 [MIPS] Remove useless instructions for initializing $gp.
2686 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2688 commit 03c031d5660ea946c39af6e2e16267da857c609f
2689 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2690 Date: Sat Oct 27 15:27:06 2007 +0900
2692 [MIPS] MIPS 4K core: Coding style cleanups
2696 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2698 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
2699 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2700 Date: Sat Nov 17 20:05:20 2007 +0900
2702 [MIPS] gth2.c: Fix a warning on gth2 build.
2704 gth2.c: In function 'misc_init_r':
2705 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
2707 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2709 commit 4fbd0741b2b6441da10be93e10267122581b7079
2710 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2711 Date: Sat Oct 27 15:22:33 2007 +0900
2713 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
2715 au1x00_eth.c: In function 'au1x00_miiphy_write':
2716 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
2718 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2720 commit f01320459736f156707425cf8112f98606301aa4
2721 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2722 Date: Sat Oct 27 15:00:25 2007 +0900
2724 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
2726 au1x00_eth.c: In function 'au1x00_enet_initialize':
2727 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
2728 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
2729 au1x00_eth.c:246: error: for each function it appears in.)
2730 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
2731 au1x00_eth.c: In function 'au1x00_miiphy_write':
2732 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
2733 make[1]: *** [au1x00_eth.o] Error 1
2735 Fixed by moving these two functions forward.
2737 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2739 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
2740 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2741 Date: Sat Oct 27 15:00:25 2007 +0900
2743 MAKEALL: Added missing pb1000 board
2745 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2747 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
2748 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2749 Date: Sat Oct 27 15:00:24 2007 +0900
2751 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
2753 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2755 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
2756 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2757 Date: Sat Oct 27 15:00:24 2007 +0900
2759 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
2761 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2763 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
2764 Author: Wolfgang Denk <wd@denx.de>
2765 Date: Sat Nov 17 02:34:38 2007 +0100
2767 Update CHANGELOIG, prepare for -rc4
2769 Signed-off-by: Wolfgang Denk <wd@denx.de>
2771 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
2772 Author: Luotao Fu <l.fu@pengutronix.de>
2773 Date: Wed Nov 14 18:58:33 2007 +0100
2775 Fix the i2c frequency and default address in rsdproto board
2777 rsdproto board support has wrong I2C frequency and wrong return value
2780 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2782 commit 429c180edad038f91c989cb14b478228092e7054
2783 Author: Wolfgang Denk <wd@denx.de>
2784 Date: Sat Nov 17 01:45:38 2007 +0100
2786 powerpc: Backout relocation changes for MPC5121, too.
2788 Apply Grant Likely's backout to MPC5121 code, too.
2790 Pointed out by Rafal Jaworowski <raj@semihalf.com>
2792 Signed-off-by: Wolfgang Denk <wd@denx.de>
2794 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
2795 Author: Grant Likely <grant.likely@secretlab.ca>
2796 Date: Tue Nov 13 22:18:33 2007 -0700
2798 powerpc: Backout relocation changes.
2800 Ugh. I *hate* to back this change out, but these compiler flags don't
2801 work for relocation on all versions of GCC. I've not been able to
2802 reproduce the environment in my setup (and hence, not been able to
2803 find a combination that *does* work), so I've got no choice but to go
2804 back to the old gcc flags and linker script.
2806 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2808 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
2809 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2810 Date: Tue Nov 13 09:11:05 2007 +0100
2812 Fixed mips_io_port_base build errors.
2814 This patch has been sent on:
2817 Although mips_io_port_base is currently a part of IDE command, it is quite
2818 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
2819 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
2821 This patch is triggered by multiple definition of `mips_io_port_base' build
2822 error on gth2 (and tb0229 also needs this fix.)
2824 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
2825 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
2826 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
2827 make: *** [u-boot] Error 1
2829 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2830 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2832 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
2833 Author: Wolfgang Denk <wd@denx.de>
2834 Date: Sat Nov 17 01:30:40 2007 +0100
2836 Fix a bug in the slave serial programming mode for the Xilinx
2837 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
2838 the most significant bit was set, which did not work on any
2839 architecture where "char" defaulted to be an unsigned type.
2841 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
2843 Signed-off-by: Wolfgang Denk <wd@denx.de>
2845 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
2846 Author: Jon Loeliger <jdl@freescale.com>
2847 Date: Thu Nov 1 12:23:29 2007 -0500
2849 86xx: Fix broken variable reference when #def DEBUGing.
2851 Sometimes you can't reference the DDR2 controller variables.
2853 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2855 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
2856 Author: Jason Jin <Jason.jin@freescale.com>
2857 Date: Fri Oct 26 18:32:00 2007 +0800
2859 make 8610 board use pixis reset
2861 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2863 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
2864 Author: Jason Jin <Jason.jin@freescale.com>
2865 Date: Mon Oct 29 19:26:21 2007 +0800
2867 Unify pixis_reset altbank across board families
2869 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
2870 into the separate board config files.
2872 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2873 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2875 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
2876 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2877 Date: Wed Nov 7 08:19:21 2007 +0100
2879 Fix warning: pointer targets in assignment differ in signedness
2881 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2883 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
2884 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2885 Date: Wed Nov 7 08:19:19 2007 +0100
2887 Fix warning differ in signedness in common/cmd_ide.c
2889 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2891 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
2892 Author: Stefan Roese <sr@denx.de>
2893 Date: Fri Nov 16 14:16:54 2007 +0100
2895 ppc4xx: Enable 405EX PCIe UTL register configuration
2897 Till now the UTL registers on 405EX were not initialized but left with
2898 their default values. This patch new initializes some of the UTL
2901 Signed-off-by: Stefan Roese <sr@denx.de>
2903 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
2904 Author: Stefan Roese <sr@denx.de>
2905 Date: Fri Nov 16 14:00:59 2007 +0100
2907 ppc4xx: Update AMCC Makalu for board rev 1.1
2909 This patch adds changes needed for Makalu rev 1.1:
2911 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
2912 - Enable 2nd ethernet port EMAC1
2913 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
2914 - Reset PCIe ports via GPIO upon bootup
2916 Signed-off-by: Stefan Roese <sr@denx.de>
2918 commit 4d4faae65e115e327425cd514c1a35146a85166b
2919 Author: Grant Likely <grant.likely@secretlab.ca>
2920 Date: Mon Sep 24 09:05:31 2007 -0600
2922 Group PCI and PCMCIA drivers in drivers/Makefile
2924 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2926 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
2927 Author: Grant Likely <grant.likely@secretlab.ca>
2928 Date: Mon Sep 24 09:05:31 2007 -0600
2930 Group block/flash drivers in drivers/Makefile
2932 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2934 commit df58c81551700f058b44cacf55a7997fa63bfe0a
2935 Author: Grant Likely <grant.likely@secretlab.ca>
2936 Date: Mon Sep 24 09:05:31 2007 -0600
2938 Group USB drivers in drivers/Makefile
2940 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2942 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
2943 Author: Grant Likely <grant.likely@secretlab.ca>
2944 Date: Mon Sep 24 09:05:30 2007 -0600
2946 Group i2c drivers in drivers/Makefile
2948 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2950 commit ec00c76de0e5971273905998d62d6bb119324218
2951 Author: Grant Likely <grant.likely@secretlab.ca>
2952 Date: Mon Sep 24 09:05:30 2007 -0600
2954 Group console drivers in drivers/Makefile
2956 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2958 commit 754f230aa01b8c789fc31f8013c2487954073300
2959 Author: Grant Likely <grant.likely@secretlab.ca>
2960 Date: Mon Sep 24 09:05:30 2007 -0600
2962 Group network drivers in drivers/Makefile
2964 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2966 commit f0037c56b0d12cd46215124667b9f83d60ef9391
2967 Author: Grant Likely <grant.likely@secretlab.ca>
2968 Date: Mon Sep 24 09:05:30 2007 -0600
2970 Build: split COBJS value into multiple lines
2972 This change is in preparation for condtitionial compile support in the
2973 build system. By spliting them all into seperate lines now, subsequent
2974 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
2975 be less invasive and easier to review
2977 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2979 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
2980 Author: Grant Likely <grant.likely@secretlab.ca>
2981 Date: Mon Sep 24 09:05:30 2007 -0600
2983 Add .gitignore files
2985 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2986 Acked-by: Kim Phillips <kim.phillips@freescale.com>
2988 commit 955413f35f054a82e40042f1dbcf501c6a05719b
2989 Author: Grant Likely <grant.likely@secretlab.ca>
2990 Date: Thu Nov 15 08:27:52 2007 -0700
2992 Revert "Correct relocation fixup for mpc5xx"
2994 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
2995 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2997 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
2998 Author: Grant Likely <grant.likely@secretlab.ca>
2999 Date: Thu Nov 15 08:24:32 2007 -0700
3001 Revert "Correct fixup relocation for MPC5xxx"
3003 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
3004 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3006 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
3007 Author: Grant Likely <grant.likely@secretlab.ca>
3008 Date: Thu Nov 15 08:21:04 2007 -0700
3010 Revert "Correct fixup relocation for mpc8220"
3012 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
3013 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3015 commit 70922342369e5e39b286fe21e768a239ca07a514
3016 Author: Grant Likely <grant.likely@secretlab.ca>
3017 Date: Thu Nov 15 08:20:57 2007 -0700
3019 Revert "Correct fixup relocation for mpc824x"
3021 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
3022 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3024 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
3025 Author: Grant Likely <grant.likely@secretlab.ca>
3026 Date: Thu Nov 15 08:20:50 2007 -0700
3028 Revert "Correct fixup relocation for mpc8260"
3030 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
3031 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3033 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
3034 Author: Grant Likely <grant.likely@secretlab.ca>
3035 Date: Thu Nov 15 08:20:43 2007 -0700
3037 Revert "Correct fixup relocation for mpc83xx"
3039 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
3040 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3042 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
3043 Author: Grant Likely <grant.likely@secretlab.ca>
3044 Date: Thu Nov 15 08:20:25 2007 -0700
3046 Revert "[MPC512x] Correct fixup relocation"
3048 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
3049 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3051 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
3052 Author: Stefan Roese <sr@denx.de>
3053 Date: Thu Nov 15 14:25:09 2007 +0100
3055 ppc4xx: Small AMCC Kilauea cleanup
3057 Remove not needed pci_target_init() function.
3059 Signed-off-by: Stefan Roese <sr@denx.de>
3061 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
3062 Author: Stefan Roese <sr@denx.de>
3063 Date: Thu Nov 15 14:23:55 2007 +0100
3065 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
3067 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
3068 - Cleanup of the 4xx GPIO functions
3069 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
3071 Signed-off-by: Stefan Roese <sr@denx.de>
3073 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
3074 Author: Stefan Roese <sr@denx.de>
3075 Date: Thu Nov 15 14:20:08 2007 +0100
3077 ppc4xx: AMCC Taihu board config file cleanup
3079 This patch makes the AMCC Taihu a little more compatible to the other
3082 Signed-off-by: Stefan Roese <sr@denx.de>
3084 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
3085 Author: Marian Balakowicz <m8@semihalf.com>
3086 Date: Thu Nov 15 13:37:28 2007 +0100
3088 [INKA4x0] NG hardware: flash support
3090 Disabled and remove inka4x0 custom flash driver, use CFI flash
3093 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3095 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
3096 Author: Marian Balakowicz <m8@semihalf.com>
3097 Date: Thu Nov 15 13:29:55 2007 +0100
3099 [INKA4x0] NG hardware: SDRAM support
3101 Add support for three new DDR chips that may be present on a NG
3102 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
3104 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
3106 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3108 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
3109 Author: Marian Balakowicz <m8@semihalf.com>
3110 Date: Thu Nov 15 13:24:43 2007 +0100
3112 [INKA4x0] NG hardware: platform code update
3114 - Cleanup compile warnings.
3115 - Add missing '\0' in default environment.
3116 - Increase CFG_MONITOR_LEN to 256 KiB.
3117 - Add required CFG_USE_PPCENV.
3119 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3121 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
3122 Author: Peter Pearse <peter.pearse@arm.com>
3123 Date: Thu Nov 15 08:58:00 2007 +0000
3125 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
3126 Remove warnings re onenand_read() & write()
3128 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
3129 Author: Peter Pearse <peter.pearse@arm.com>
3130 Date: Thu Nov 15 08:45:13 2007 +0000
3134 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
3135 Author: Roy Zang <tie-fei.zang@freescale.com>
3136 Date: Thu Sep 13 18:52:28 2007 +0800
3138 Enable ULi1575 Ethernet support in 8610HPCD config
3140 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3141 Acked-by: Jon Loeliger <jdl@freescale.com>
3143 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
3144 Author: Stefan Roese <sr@denx.de>
3145 Date: Tue Nov 13 08:18:20 2007 +0100
3147 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
3149 Signed-off-by: Stefan Roese <sr@denx.de>
3151 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
3152 Author: Stefan Roese <sr@denx.de>
3153 Date: Tue Nov 13 08:06:11 2007 +0100
3155 ppc4xx: Fix 405EX PCIe UTLSET register setup
3157 Signed-off-by: Stefan Roese <sr@denx.de>
3159 commit 1ce55151c85d068f70317a8d65c61058b891afb4
3160 Author: Heiko Schocher <hs@denx.de>
3161 Date: Tue Nov 13 07:50:29 2007 +0100
3163 [UC101] SRAM now with 2 MB working.
3165 Signed-off-by: Heiko Schocher <hs@denx.de>
3167 commit 2d14684341109a69616e4d6016cd61402d55086f
3168 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3169 Date: Fri Nov 9 15:37:53 2007 +0100
3171 ppc4xx: Use generic usb-ohci driver for sequoia board
3173 This patch makes the sequoia board use the generic usb-ohci driver
3174 instead of cpu/ppc4xx/usb_ohci.c.
3176 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3177 Signed-off-by: Stefan Roese <sr@denx.de>
3179 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
3180 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3181 Date: Fri Nov 9 15:37:23 2007 +0100
3183 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
3185 This patch disables the 44x d-cache on 'usb start' and
3186 reenables it on 'usb stop'. This should be seen as a
3187 temporary fix until the generic usb-ohci driver can
3188 life with d-cache enabled.
3190 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3191 Signed-off-by: Stefan Roese <sr@denx.de>
3193 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
3194 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3195 Date: Fri Nov 9 15:36:44 2007 +0100
3197 ppc4xx: Remove redundant code from 4xx network driver
3199 This patch removes some redundant code and decrements the end
3200 address of cache flush and invalidate by 1.
3202 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3203 Signed-off-by: Stefan Roese <sr@denx.de>
3205 commit 5ca9881aad8c413ac2a82868a5e3719178254502
3206 Author: Peter Pearse <peter.pearse@arm.com>
3207 Date: Fri Nov 9 15:24:26 2007 +0000
3209 Add apollon board support
3210 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3212 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
3213 Author: Stefan Roese <sr@denx.de>
3214 Date: Fri Nov 9 12:19:58 2007 +0100
3216 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
3218 Signed-off-by: Stefan Roese <sr@denx.de>
3220 commit c7f69c340277935a6c19a956421852da944a365f
3221 Author: Stefan Roese <sr@denx.de>
3222 Date: Fri Nov 9 12:18:54 2007 +0100
3224 ppc4xx: Make output a little shorter on I2C bootrom detection
3226 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
3227 already print a line with the information which I2C bootrom is
3228 used for bootstrap configuration. So we don't need this extra line
3229 with "I2C boot EEPROM en-/dis-abled".
3231 This patch also has a little code cleanup integrated.
3233 Signed-off-by: Stefan Roese <sr@denx.de>
3235 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
3236 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3237 Date: Thu Nov 8 12:50:18 2007 -0600
3239 ColdFire: MCF5329 - Remove reset registers from CCM
3241 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3243 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
3244 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3245 Date: Thu Nov 8 12:31:11 2007 -0600
3247 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
3249 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3251 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
3252 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3253 Date: Thu Nov 8 12:19:01 2007 -0600
3255 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
3257 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3259 commit 225a24b5e062ad94627424508ae814f51dbe1a34
3260 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3261 Date: Wed Nov 7 18:00:54 2007 -0600
3263 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
3265 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3267 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
3268 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3269 Date: Wed Nov 7 17:56:15 2007 -0600
3271 ColdFire: MCF532x - Update do_reset() using core reset
3273 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3275 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
3276 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3277 Date: Wed Nov 7 17:51:00 2007 -0600
3279 ColdFire: Update cpu flag for 4.2-xx compiler
3281 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3283 commit 070ba56115b4da63b46e974287fa4550d4023386
3284 Author: York Sun <yorksun@freescale.com>
3285 Date: Wed Oct 31 14:59:04 2007 -0500
3287 8610: Add console frame buffer support to FSL 8610 DIU driver.
3289 Add cfb console support to FSL 8610 DIU driver.
3290 Inspect board version from PIXIS to obtain correct pixel format.
3292 Use #define CONFIG_VIDEO in config file to enable fb console.
3294 To switch monitor, set monitor variable to
3295 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
3296 followed by "diufb init".
3298 Preserve logo bitmap at the top of the fb console.
3300 Signed-off-by: York Sun <yorksun@freescale.com>
3301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3303 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
3304 Author: York Sun <yorksun@freescale.com>
3305 Date: Mon Oct 29 13:58:39 2007 -0500
3307 8610: Add 8610 DIU display driver
3309 1280x1024 and 1024x768 @ 32 bpp are supported now.
3310 DVI, Single-link LVDS, Double-link LVDS are all supported.
3312 Environmental variable "monitor" is used to specify monitor port.
3314 A new command "diufb" is introduced to reinitialize monitor
3315 and display a BMP file in the memory. So far, 1-bit, 4-bit,
3316 8-bit and 24-bit BMP formats are supported.
3319 - initialize the diu driver
3320 Enable the port specified in the environmental variable "monitor"
3323 - display bmp file in memory.
3324 The bmp image should be no bigger than the resolution, 1280x1024
3325 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
3327 Note, this driver allocate memory but doesn't free it after use
3328 It is written on purpose -- to avoid a failure of reallocation
3329 due to memory fragement.
3331 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
3333 Signed-off-by: York Sun <yorksun@freescale.com>
3334 Signed-off-by: Jon loeliger <jdl@freescale.com>
3336 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
3337 Author: York Sun <yorksun@freescale.com>
3338 Date: Wed Oct 31 10:43:59 2007 -0500
3340 FSL: Add a freescale bitmap logo.
3342 This Freescale logo is a 340 x 128 x 4bpp BMP file
3343 that can be displayed by the DIU Framebuffer driver.
3345 Signed-off-by: York Sun <yorksun@freescale.com>
3346 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3348 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
3349 Author: York Sun <yorksun@freescale.com>
3350 Date: Mon Oct 29 13:57:53 2007 -0500
3352 8610: Make some extra debug environment variables conditional.
3354 One may #define ENV_DEBUG to get them back again.
3356 Signed-off-by: York Sun <yorksun@freescale.com>
3358 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
3359 Author: Jason Jin <Jason.jin@freescale.com>
3360 Date: Mon Oct 29 19:26:21 2007 +0800
3362 8610: Actually enable pixis_reset CONFIGs
3364 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3366 commit f3bceaab230b4748d0afc4109b6837308f018b40
3367 Author: Jason Jin <Jason.jin@freescale.com>
3368 Date: Fri Oct 26 18:31:59 2007 +0800
3370 Fix the BAT definition of PCI IO on 8610 board
3372 The address in the BAT register is aligned with the BAT size.
3373 The original definition actually did not define BAT for PCIE2 IO.
3374 This patch fix this.
3376 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3378 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
3379 Author: Jason Jin <Jason.jin@freescale.com>
3380 Date: Mon Oct 29 19:26:21 2007 +0800
3382 Unify pixis_reset altbank across board families
3384 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
3385 into the separate board config files.
3387 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3388 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3390 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
3391 Author: Jason Jin <Jason.jin@freescale.com>
3392 Date: Fri Oct 26 18:32:00 2007 +0800
3394 make 8610 board use pixis reset
3396 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3398 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
3399 Author: Jon Loeliger <jdl@freescale.com>
3400 Date: Thu Nov 1 12:23:29 2007 -0500
3402 86xx: Fix broken variable reference when #def DEBUGing.
3404 Sometimes you can't reference the DDR2 controller variables.
3406 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3408 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
3409 Author: Roy Zang <tie-fei.zang@freescale.com>
3410 Date: Mon Nov 5 17:39:24 2007 +0800
3412 Implement general ULi 526x Ethernet driver support in U-boot
3414 This patch implements general ULi 526x Ethernet driver.
3415 Until now, it is the only native Ethernet port on
3416 MPC8610HPCD board, but it could be used on other boards
3417 with ULi 526x Ethernet port as well.
3419 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3420 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3421 Acked-by: Jon Loeliger <jdl@freescale.com>
3422 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3424 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
3425 Author: Larry Johnson <lrj@arlinx.com>
3426 Date: Thu Nov 1 08:46:50 2007 -0500
3428 NET: Add Ethernet 1000BASE-X support for PPC4xx
3430 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
3431 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
3432 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
3433 "mii info" command is modified to distinguish between 1000BASE-T and -X.
3435 Signed-off-by: Larry Johnson <lrj@acm.org>
3436 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3438 commit 298035df4948b113d29ac0e694717d34b95bc5dc
3439 Author: Larry Johnson <lrj@arlinx.com>
3440 Date: Wed Oct 31 11:21:29 2007 -0500
3442 NET: Cosmetic changes
3444 Signed-off-by: Larry Johnson <lrj@acm.org>
3445 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3447 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
3448 Author: Stefan Roese <sr@denx.de>
3449 Date: Mon Nov 5 07:43:05 2007 +0100
3451 ppc4xx: Make output a little shorter on PCIe detection
3453 Now not max 3 lines but 2 lines are printed per PCIe port.
3455 Signed-off-by: Stefan Roese <sr@denx.de>
3457 commit 992742a5b09d9040adbd156fb90756af66ade310
3458 Author: Wolfgang Denk <wd@denx.de>
3459 Date: Sat Nov 3 23:09:27 2007 +0100
3461 Cleanup coding style; update CHANGELOG
3463 Signed-off-by: Wolfgang Denk <wd@denx.de>
3465 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
3466 Author: Bruce Adler <bruce.adler@ccpu.com>
3467 Date: Fri Nov 2 13:15:42 2007 -0700
3469 fix wording in README
3471 Changed the wording to properly describe the shadowing
3472 of the environment from ROM to RAM
3474 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
3476 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
3477 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3478 Date: Wed Oct 31 02:18:15 2007 +0900
3480 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
3482 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3484 commit ec22755799466c8a103664bb3a5e647bf9c238f4
3485 Author: Vlad Lungu <vlad@comsys.ro>
3486 Date: Thu Oct 25 16:08:14 2007 +0300
3488 Trimmed some variables in ne2000.c
3490 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
3492 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
3493 Author: Zhang Wei <wei.zhang@freescale.com>
3494 Date: Thu Oct 25 17:51:27 2007 +0800
3496 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
3498 The scan code of the key 'z' is 0x1d, which should be handled.
3500 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
3503 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3505 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
3506 Author: Zhang Wei <wei.zhang@freescale.com>
3507 Date: Thu Oct 25 17:30:04 2007 +0800
3509 Fix USB support issue for MPC8641HPCN board.
3511 The configuration file has already enabled USB, but it
3512 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
3513 on MPC8641HPCN can not work because of the wrong USB
3516 And add the USB command to U-Boot commands list.
3518 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3520 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
3521 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3522 Date: Wed Oct 24 18:16:01 2007 +0200
3524 Use config_cmd_default.h instead of config_cmd_all.h
3526 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3528 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
3529 Author: Marian Balakowicz <m8@semihalf.com>
3530 Date: Wed Oct 24 01:37:36 2007 +0200
3532 TQM5200: Call usb_cpu_init() during board init
3534 usb_cpu_init() configures GPS USB pins, clocks, etc. and
3535 is required for proper operation of kernel USB subsystem.
3536 This setup was previously done in the kernel by the fixup
3537 code which is being removed, thus low level init must be
3540 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3542 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
3543 Author: Guennadi Liakhovetski <lg@denx.de>
3544 Date: Tue Oct 23 16:25:50 2007 +0200
3548 An obvious typo. Originally fixed in linkstation u-boot port.
3550 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3552 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
3553 Author: Guennadi Liakhovetski <lg@denx.de>
3554 Date: Tue Oct 23 14:35:05 2007 +0200
3556 Fix a typo in cpu/mpc824x/interrupts.c
3558 Since December 2003 the timer_interrupt_cpu() function in
3559 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
3560 parameter. Remove it.
3562 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3564 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
3565 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
3566 Date: Wed Oct 17 11:13:51 2007 +0200
3568 add ft_cpu_setup(..) on mpc8260
3570 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
3571 based on code from mpc5xxx
3573 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
3576 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
3577 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
3578 Date: Wed Oct 17 11:18:42 2007 +0200
3580 changes for IDS8247 board support
3582 To get the IDS8247 board working following are done:
3583 - FCC2 is deactivated
3586 - CFI driver is activated
3587 - Adapted for use with LIBFDT
3589 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
3592 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
3593 Author: Stefan Roese <sr@denx.de>
3594 Date: Sat Nov 3 12:08:28 2007 +0100
3596 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
3598 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
3599 Again, only one image supports both targets.
3601 Signed-off-by: Stefan Roese <sr@denx.de>
3603 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
3604 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
3605 Date: Wed Oct 24 15:48:37 2007 +0200
3607 ATSTK1002: Remove default ethernet addresses
3609 Wolfgang is right: It's not a good idea to set up default initial
3610 ethernet addresses for a board, even though they belong to the local
3613 This will change the failure mode from "IT manager screams at you for
3614 using duplicate ethernet addresses" to a nice error message explaining
3615 that the ethernet address hasn't been set properly.
3617 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3619 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
3620 Author: Justin Flammia <jflammia@savantav.com>
3621 Date: Mon Oct 29 17:40:35 2007 -0400
3625 This is a multi-part message in MIME format.
3627 commit e6e505eae94ed721e123e177489291fc4544b7b8
3628 Author: Justin Flammia <jflammia@savantav.com>
3629 Date: Mon Oct 29 17:19:03 2007 -0400
3631 Found a bug in the way the DHCP Request packet is built, where the IP address
3632 that is offered by the server is bound to prematurely. This patch is a fix of
3633 that bug where the IP address offered by the DHCP server is not used until
3634 after the DHCP ACK from the server is received.
3636 Signed-off-by: Justin Flammia <jflammia@savantav.com>
3637 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3639 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
3640 Author: Stefan Roese <sr@denx.de>
3641 Date: Wed Oct 31 20:58:34 2007 +0100
3643 ppc4xx: Fix acadia_nand build problem
3645 Since the cache handling functions were moved from start.S into cache.S
3646 the acadia NAND booting Makfile needs to be adapted accordingly.
3648 Signed-off-by: Stefan Roese <sr@denx.de>
3650 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
3651 Author: Stefan Roese <sr@denx.de>
3652 Date: Wed Oct 31 20:57:11 2007 +0100
3654 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
3656 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
3657 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
3658 boards by defining CONFIG_4xx_DCACHE in the board config file. This
3659 option will disappear, when more boards use is successfully and no
3660 more known problems exist.
3662 This is tested successfully on Sequoia and Katmai. The only problem that
3663 needs to be fixed is, that USB is not working on Sequoia right now, since
3664 it will need some cache handling code too, similar to the 4xx EMAC driver.
3666 Signed-off-by: Stefan Roese <sr@denx.de>
3668 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
3669 Author: Stefan Roese <sr@denx.de>
3670 Date: Wed Oct 31 20:51:10 2007 +0100
3672 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
3674 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
3675 disable the cache for the CPU POST tests, since these tests consist
3676 of self modifying code. This is done via the new change_tlb() function.
3678 Signed-off-by: Stefan Roese <sr@denx.de>
3680 commit f71b2888b4b3c870909a0341427b2a914246f81f
3681 Author: Stefan Roese <sr@denx.de>
3682 Date: Wed Oct 31 20:47:26 2007 +0100
3684 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
3686 This patch enables the 4xx EMAC POST driver to work too, when dcache is
3689 Signed-off-by: Stefan Roese <sr@denx.de>
3691 commit a2685904061b35a17583d65fe47cdc2686a69eaa
3692 Author: Stefan Roese <sr@denx.de>
3693 Date: Wed Oct 31 20:45:53 2007 +0100
3695 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
3697 Signed-off-by: Stefan Roese <sr@denx.de>
3699 commit ff768cb168d8157c24a25016dbfbeb465e47f420
3700 Author: Stefan Roese <sr@denx.de>
3701 Date: Wed Oct 31 18:01:24 2007 +0100
3703 ppc4xx: Change 4xx ethernet driver to handle cached memory too
3705 This patch enables the 4xx EMAC driver to work too, when dcache is
3708 Signed-off-by: Stefan Roese <sr@denx.de>
3710 commit 483e09a223c666269ef81d3573a6591b1046b0ef
3711 Author: Stefan Roese <sr@denx.de>
3712 Date: Wed Oct 31 17:59:22 2007 +0100
3714 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
3716 This function is used to either turn cache on or off in a specific
3719 Signed-off-by: Stefan Roese <sr@denx.de>
3721 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
3722 Author: Stefan Roese <sr@denx.de>
3723 Date: Wed Oct 31 17:57:52 2007 +0100
3725 ppc4xx: Remove cache definition from 4xx board config files
3727 All 4xx board config files don't need the cache definitions anymore.
3728 These are now defined in common headers.
3730 Signed-off-by: Stefan Roese <sr@denx.de>
3732 commit 9b94ac61d2176185c30adf0793e079ec30e68687
3733 Author: Stefan Roese <sr@denx.de>
3734 Date: Wed Oct 31 17:55:58 2007 +0100
3736 ppc4xx: Rework 4xx cache support
3738 New cache handling functions added and all existing functions
3739 moved from start.S into seperate cache.S.
3741 Signed-off-by: Stefan Roese <sr@denx.de>
3743 commit 06713773da4ac3d390c63d82641eb553224b27c2
3744 Author: Stefan Roese <sr@denx.de>
3745 Date: Tue Oct 23 18:03:12 2007 +0200
3747 ppc4xx: Remove compiler warning from previous commit
3749 Signed-off-by: Stefan Roese <sr@denx.de>
3751 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
3752 Author: Stefan Roese <sr@denx.de>
3753 Date: Tue Oct 23 14:40:30 2007 +0200
3755 ppc4xx: Remove temporary TLB entry in POST cache test
3757 Signed-off-by: Stefan Roese <sr@denx.de>
3759 commit 1338e6a81834099ba19733b69aafd8ef5f098094
3760 Author: Stefan Roese <sr@denx.de>
3761 Date: Tue Oct 23 14:05:08 2007 +0200
3763 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
3765 I lately noticed, that newer 4xx board with GBit support sometimes don't
3766 finish link autonegotiation in 4 seconds. Changing this timeout to 5
3767 seconds seems fine here.
3769 Signed-off-by: Stefan Roese <sr@denx.de>
3771 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
3772 Author: Stefan Roese <sr@denx.de>
3773 Date: Tue Oct 23 14:03:17 2007 +0200
3775 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
3777 This patch changes all in32/out32 calls to use the recommended in_be32/
3778 out_be32 macros instead.
3780 Signed-off-by: Stefan Roese <sr@denx.de>
3782 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
3783 Author: Stefan Roese <sr@denx.de>
3784 Date: Thu Oct 25 12:24:59 2007 +0200
3786 ppc4xx: Fix POST ethernet test for Haleakala
3788 The POST ethernet test needed to be changed to dynamically determine
3789 the count of ethernet devices. This code is cloned from the 4xx
3792 Signed-off-by: Stefan Roese <sr@denx.de>
3794 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
3795 Author: Stefan Roese <sr@denx.de>
3796 Date: Tue Oct 23 11:31:05 2007 +0200
3798 ppc4xx: Correct UART input clock calculation and passing to fdt
3800 We now use a value in the gd (global data) structure for the UART input
3801 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
3804 Signed-off-by: Stefan Roese <sr@denx.de>
3806 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
3807 Author: Stefan Roese <sr@denx.de>
3808 Date: Tue Oct 23 10:10:08 2007 +0200
3810 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
3812 The Haleakala is nearly identical with the Kilauea eval board. The only
3813 difference is that the 405EXr only supports one EMAC and one PCIe
3814 interface. This patch adds support for the Haleakala board by using
3815 the identical image for Kilauea and Haleakala. The distinction is done
3816 by comparing the PVR.
3818 Signed-off-by: Stefan Roese <sr@denx.de>
3820 commit 9f798766aa85e62eb8fa8c721e148df609b78137
3821 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
3822 Date: Tue Oct 23 08:29:10 2007 +0200
3824 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
3826 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
3829 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
3830 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
3831 modules are still plugged in. So it is recommended to remove the DIMM
3832 modules while using the NAND booting code with the fixed SDRAM setup!
3834 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
3835 Signed-off-by: Stefan Roese <sr@denx.de>
3837 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
3838 Author: Stefan Roese <sr@denx.de>
3839 Date: Mon Oct 22 16:24:44 2007 +0200
3841 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
3843 Signed-off-by: Stefan Roese <sr@denx.de>
3845 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
3846 Author: Stefan Roese <sr@denx.de>
3847 Date: Mon Oct 22 16:22:40 2007 +0200
3849 ppc4xx: Rework of 4xx serial driver (4)
3853 - Use in_8/out_8 macros instead of in8/out8
3854 - No need for UART_BASE marco anymore, now really handled via function
3856 - serial_init_common() introduced
3857 - Further coding style cleanup
3859 Signed-off-by: Stefan Roese <sr@denx.de>
3861 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
3862 Author: Stefan Roese <sr@denx.de>
3863 Date: Mon Oct 22 15:45:49 2007 +0200
3865 ppc4xx: Rework of 4xx serial driver (3)
3867 Change all linker scripts to reference the changed driver name iop480_uart.o.
3869 Signed-off-by: Stefan Roese <sr@denx.de>
3871 commit 882ae41274921f9016131806bdeb27e19606f47a
3872 Author: Stefan Roese <sr@denx.de>
3873 Date: Mon Oct 22 15:44:39 2007 +0200
3875 ppc4xx: Rework of 4xx serial driver (2)
3877 Change all linker scripts to reference the changed driver name 4xx_uart.o.
3879 Note: In most cased all these explicit referencing of these object files
3880 in the linker scripts is not neccessary. Only for manually embedded
3881 environment into the U-Boot image, which is not done is most cases.
3883 Signed-off-by: Stefan Roese <sr@denx.de>
3885 commit ad31e40bed042cb670d0036fea96435007afb838
3886 Author: Stefan Roese <sr@denx.de>
3887 Date: Mon Oct 22 15:09:59 2007 +0200
3889 ppc4xx: Rework of 4xx serial driver (1)
3891 This patch starts the rework of the PPC4xx serial driver. First we split
3892 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
3893 handling code and the other one iop480_uart.c with the UART code for the
3894 PLX-Tech IOP480 PPC (PPC403 based).
3896 Signed-off-by: Stefan Roese <sr@denx.de>
3898 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
3899 Author: Stefan Roese <sr@denx.de>
3900 Date: Mon Oct 22 10:30:38 2007 +0200
3902 ppc4xx: Correct UART input clock calculation and passing to fdt
3904 Signed-off-by: Stefan Roese <sr@denx.de>
3906 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
3907 Author: Stefan Roese <sr@denx.de>
3908 Date: Mon Oct 22 07:34:34 2007 +0200
3910 ppc4xx: Add initial AMCC Makalu 405EX support
3912 Signed-off-by: Stefan Roese <sr@denx.de>
3914 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
3915 Author: Stefan Roese <sr@denx.de>
3916 Date: Mon Oct 22 07:33:52 2007 +0200
3918 ppc4xx: Add freqUART to CPU speed detection
3920 This value is needed later for the device tree configuration of
3923 Signed-off-by: Stefan Roese <sr@denx.de>
3925 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
3926 Author: Stefan Roese <sr@denx.de>
3927 Date: Sun Oct 21 14:26:29 2007 +0200
3929 ppc: Small Kilauea cleanup of config file
3931 Signed-off-by: Stefan Roese <sr@denx.de>
3933 commit 758c037aeead34b49631b8da3a90b1bba14c0410
3934 Author: Stefan Roese <sr@denx.de>
3935 Date: Sun Oct 21 08:16:12 2007 +0200
3937 rtc: Add Xicor/Intersil X1205 RTC support
3939 This patch adds support for the Xicor/Intersil X1205 RTC used on the
3940 AMCC Makalu eval board. This driver is basically cloned from the Linux
3941 driver version (2.6.23).
3943 This patch also introduces the Linux bcd.h header for the BCD2BIN/
3944 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
3945 should be converted to also use this header instead of implementing
3946 their own local copy of these functions/macros.
3948 Signed-off-by: Stefan Roese <sr@denx.de>
3950 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
3951 Author: Stefan Roese <sr@denx.de>
3952 Date: Sun Oct 21 08:12:41 2007 +0200
3954 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
3956 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
3957 PPC440_SYS_INFO structure into the common ppc4xx.h header.
3959 Lot's of other macros are good candidates to be consolidated this way
3962 Signed-off-by: Stefan Roese <sr@denx.de>
3964 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
3965 Author: Stefan Roese <sr@denx.de>
3966 Date: Sun Oct 21 08:05:18 2007 +0200
3968 ppc4xx: Fix size setup in Kilauea DDR2 init routine
3970 The size was initilized wrong. Instead of 256MB, the DDR2 controller
3971 was setup to 512MB. Now the correct values is used.
3973 This patch also does a little cleanup and adds a comment here.
3975 Signed-off-by: Stefan Roese <sr@denx.de>
3977 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
3978 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
3979 Date: Thu Oct 18 17:29:04 2007 +0200
3981 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
3983 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
3984 number is used to access system registers.
3986 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
3987 Signed-off-by: Stefan Roese <sr@denx.de>
3989 commit c36c68160333ac5fe41ec3db12a728b7075b3912
3990 Author: Stefan Roese <sr@denx.de>
3991 Date: Thu Oct 18 07:42:27 2007 +0200
3993 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
3995 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
3996 is the internal SRAM. Since I now ported and tested this endpoint mode
3997 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
4000 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
4003 Signed-off-by: Stefan Roese <sr@denx.de>
4005 commit 5cb4af4791f61843432155142b6cfac901f66c10
4006 Author: Stefan Roese <sr@denx.de>
4007 Date: Thu Oct 18 07:39:38 2007 +0200
4009 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
4011 This patch adds endpoint support for the AMCC Kilauea eval board. It can
4012 be tested by connecting a reworked PCIe cable (only 1x lane singles
4013 connected) to another root-complex.
4015 In this test setup, a 64MB inbound window is configured at BAR0 which maps
4016 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
4017 access the first 64MB of the SDRAM on the PPC side.
4019 Signed-off-by: Stefan Roese <sr@denx.de>
4021 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
4022 Author: Stefan Roese <sr@denx.de>
4023 Date: Sat Oct 13 16:43:23 2007 +0200
4025 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
4027 This patch adds support for dynamic configuration of PCIe ports for the
4028 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
4029 boards Yucca & Katmai and the 405EX board Kilauea.
4031 This dynamic configuration is done via the "pcie_mode" environement
4032 variable. This variable can be set to "EP" or "RP" for endpoint or
4033 rootpoint mode. Multiple values can be joined via the ":" delimiter.
4038 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
4041 Per default Yucca will be configured as:
4044 Per default Katmai will be configured as:
4047 Per default Kilauea will be configured as:
4050 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
4051 Signed-off-by: Stefan Roese <sr@denx.de>
4053 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
4054 Author: Stefan Roese <sr@denx.de>
4055 Date: Thu Oct 11 11:15:59 2007 +0200
4057 ppc4xx: Enable device tree support (fdt) on Kilauea per default
4059 This patch enables the fdt support on the AMCC Kilauea eval board.
4060 Additionally now EBC ranges fdt fixup is included to support NOR
4061 FLASH mapping via the Linux physmap_of driver.
4063 This Kilauea port now support booting arch/ppc and arch/powerpc
4064 Linux kernels. The default environment "net_nfs" is for arch/ppc
4065 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
4066 support will be removed.
4068 Signed-off-by: Stefan Roese <sr@denx.de>
4070 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
4071 Author: Stefan Roese <sr@denx.de>
4072 Date: Thu Oct 11 11:11:45 2007 +0200
4074 ppc4xx: Add additional debug info to 4xx fdt support
4076 Signed-off-by: Stefan Roese <sr@denx.de>
4078 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
4079 Author: Stefan Roese <sr@denx.de>
4080 Date: Fri Oct 5 21:28:58 2007 +0200
4082 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
4084 Signed-off-by: Stefan Roese <sr@denx.de>
4086 commit 1941cce71b1ae975602854045061e82f94ecd012
4087 Author: Stefan Roese <sr@denx.de>
4088 Date: Fri Oct 5 17:35:10 2007 +0200
4090 ppc4xx: Fix small merge problem in 4xx_enet.c
4092 Signed-off-by: Stefan Roese <sr@denx.de>
4094 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
4095 Author: Stefan Roese <sr@denx.de>
4096 Date: Fri Oct 5 17:11:30 2007 +0200
4098 ppc4xx: Add initial AMCC Kilauea 405EX support
4100 Signed-off-by: Stefan Roese <sr@denx.de>
4102 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
4103 Author: Stefan Roese <sr@denx.de>
4104 Date: Fri Oct 5 17:10:59 2007 +0200
4106 ppc4xx: Add PPC405EX support
4108 Signed-off-by: Stefan Roese <sr@denx.de>
4110 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
4111 Author: Stefan Roese <sr@denx.de>
4112 Date: Fri Oct 5 17:09:36 2007 +0200
4114 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
4116 Signed-off-by: Stefan Roese <sr@denx.de>
4118 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
4119 Author: Stefan Roese <sr@denx.de>
4120 Date: Fri Oct 5 17:07:50 2007 +0200
4122 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
4124 Signed-off-by: Stefan Roese <sr@denx.de>
4126 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
4127 Author: Stefan Roese <sr@denx.de>
4128 Date: Fri Oct 5 17:04:57 2007 +0200
4130 POST: Add 405EX support to 4xx UART POST test
4132 Signed-off-by: Stefan Roese <sr@denx.de>
4134 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
4135 Author: Stefan Roese <sr@denx.de>
4136 Date: Fri Oct 5 15:10:02 2007 +0200
4138 DTT: Prepare DS1775 driver for use of different I2C addresses
4140 Signed-off-by: Stefan Roese <sr@denx.de>
4142 commit 19e93b1e16d267220440d827b920fbad8abfa70f
4143 Author: Stefan Roese <sr@denx.de>
4144 Date: Fri Oct 5 14:23:43 2007 +0200
4146 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
4148 Signed-off-by: Stefan Roese <sr@denx.de>
4150 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
4151 Author: Stefan Roese <sr@denx.de>
4152 Date: Fri Oct 5 09:22:33 2007 +0200
4154 ppc4xx: 4xx_pcie: Disable debug output as default
4156 Signed-off-by: Stefan Roese <sr@denx.de>
4158 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
4159 Author: Stefan Roese <sr@denx.de>
4160 Date: Fri Oct 5 09:18:23 2007 +0200
4162 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
4164 Signed-off-by: Stefan Roese <sr@denx.de>
4166 commit 4dbee8a90df613eb517aadbecebd70f168913d30
4167 Author: Stefan Roese <sr@denx.de>
4168 Date: Fri Oct 5 07:57:20 2007 +0200
4170 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
4172 128MB seems to be the smallest possible value for the memory size
4173 for on PCIe port. With this change now the BAR's of the PCIe cards
4174 are accessible under U-Boot.
4176 One big note: This only works for PCIe port 0 & 1. For port 2 this
4177 currently doesn't work, since the base address is now 0xc0000000
4178 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
4179 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
4180 to change the base addresses completely and this change would have
4181 too much impact right now.
4183 This patch adds debug output to the 4xx pcie driver too.
4185 Signed-off-by: Stefan Roese <sr@denx.de>
4187 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
4188 Author: Stefan Roese <sr@denx.de>
4189 Date: Wed Oct 3 21:16:32 2007 +0200
4191 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
4193 Signed-off-by: Stefan Roese <sr@denx.de>
4195 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
4196 Author: Stefan Roese <sr@denx.de>
4197 Date: Wed Oct 3 15:01:02 2007 +0200
4199 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
4201 These files were introduced with the IBM 405GP but are currently used on all
4202 4xx PPC platforms. So the name doesn't match the content anymore. This patch
4203 renames the files to 4xx_pci.c/h.
4205 Signed-off-by: Stefan Roese <sr@denx.de>
4207 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
4208 Author: Stefan Roese <sr@denx.de>
4209 Date: Wed Oct 3 14:14:58 2007 +0200
4211 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
4213 Signed-off-by: Stefan Roese <sr@denx.de>
4215 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
4216 Author: Stefan Roese <sr@denx.de>
4217 Date: Wed Oct 3 10:38:09 2007 +0200
4219 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
4221 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
4222 the SDR registers of the PCIe ports. This makes the overall design
4223 clearer, since it removed a lot of switch statements which are not
4226 Also, the functions ppc4xx_init_pcie_rootport() and
4227 ppc4xx_init_pcie_entport() are merged into a single function
4228 ppc4xx_init_pcie_port(), since most of the code was duplicated.
4229 This makes maintainance and porting to other 4xx platforms
4232 Signed-off-by: Stefan Roese <sr@denx.de>
4234 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
4235 Author: Stefan Roese <sr@denx.de>
4236 Date: Wed Oct 3 07:48:09 2007 +0200
4238 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
4240 This patch is the first patch of a series to make the 440SPe PCIe code
4241 usable on different 4xx PPC platforms. In preperation for the new 405EX
4242 which is also equipped with PCIe interfaces.
4244 (2) This patch renames the functions from 440spe_ to 4xx_ with a
4245 little additional cleanup
4247 Signed-off-by: Stefan Roese <sr@denx.de>
4249 commit c7c6da23028f146d912514b95aefa3da7cf37699
4250 Author: Stefan Roese <sr@denx.de>
4251 Date: Wed Oct 3 07:34:10 2007 +0200
4253 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
4255 This patch is the first patch of a series to make the 440SPe PCIe code
4256 usable on different 4xx PPC platforms. In preperation for the new 405EX
4257 which is also equipped with PCIe interfaces.
4259 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
4261 Signed-off-by: Stefan Roese <sr@denx.de>
4263 commit 31548249decf18a6b877a18436b6139dd483fe4a
4264 Author: Justin Flammia <jflammia@savantav.com>
4265 Date: Mon Oct 29 17:40:35 2007 -0400
4269 This is a multi-part message in MIME format.
4271 commit e6e505eae94ed721e123e177489291fc4544b7b8
4272 Author: Justin Flammia <jflammia@savantav.com>
4273 Date: Mon Oct 29 17:19:03 2007 -0400
4275 Found a bug in the way the DHCP Request packet is built, where the IP address
4276 that is offered by the server is bound to prematurely. This patch is a fix of
4277 that bug where the IP address offered by the DHCP server is not used until
4278 after the DHCP ACK from the server is received.
4280 Signed-off-by: Justin Flammia <jflammia@savantav.com>
4281 Signed-off-by: Ben Warren <bwarren@qstreams.com>
4283 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
4284 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4285 Date: Thu Oct 25 17:16:22 2007 -0500
4287 ColdFire 54455: Fix correct boot location for atmel and intel
4289 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4291 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
4292 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4293 Date: Thu Oct 25 17:14:00 2007 -0500
4295 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
4297 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4299 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
4300 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4301 Date: Thu Oct 25 17:12:36 2007 -0500
4303 ColdFire 5329: Assign correct SDRAM size and fix cache
4305 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4307 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
4308 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4309 Date: Thu Oct 25 17:10:23 2007 -0500
4311 ColdFire 5253: Assign correct SDRAM size
4313 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4315 commit 2acefa72ee0026f862ab65597ca687428f63a973
4316 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4317 Date: Thu Oct 25 17:09:17 2007 -0500
4319 ColdFire 5282: Fix external flash boot and return dramsize
4321 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4323 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
4324 Author: Bartlomiej Sieka <tur@semihalf.com>
4325 Date: Thu Oct 25 17:20:01 2007 +0200
4327 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
4329 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4331 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
4332 Author: Martin Krause <martin.krause@tqs.de>
4333 Date: Wed Oct 24 08:42:25 2007 +0200
4335 TQM5200: fix spurious characters on second serial interface
4337 With this patch PSC3 is configured as UART. This is done, because if
4338 the pins of PSC3 are not configured at all (-> all pins are GPI),
4339 due to crosstalk, spurious characters may be send over the RX232_2_TXD
4342 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4343 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4345 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
4346 Author: Martin Krause <martin.krause@tqs.de>
4347 Date: Wed Oct 24 08:41:27 2007 +0200
4349 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
4351 Some commands for the STK52xx base board try to access the SM501 grafic
4352 controller. But the TQM5200S has no grafic controller (only the TQM5200
4353 and the TQM5200B have). This patch deactivates the commands accessing
4354 the SM501 for the TQM5200S.
4356 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4357 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4359 commit b31f64343ead9482cd439b1adbe4c34026a641b1
4360 Author: Martin Krause <martin.krause@tqs.de>
4361 Date: Mon Oct 22 16:45:53 2007 +0200
4363 TQM5200: fix spurious characters on second serial interface
4365 With this patch PSC3 is configured as UART. This is done, because if
4366 the pins of PSC3 are not configured at all (-> all pins are GPI),
4367 due to crosstalk, spurious characters may be send over the RX232_2_TXD
4370 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4372 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
4373 Author: Martin Krause <martin.krause@tqs.de>
4374 Date: Mon Oct 22 16:40:06 2007 +0200
4376 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
4378 Some commands for the STK52xx base board try to access the SM501 grafic
4379 controller. But the TQM5200S has no grafic controller (only the TQM5200
4380 and the TQM5200B have). This patch deactivates the commands accessing
4381 the SM501 for the TQM5200S.
4383 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4385 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
4386 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4387 Date: Sun Oct 21 09:14:28 2007 +0200
4389 Mips: Fix string functions differ prototype declaration
4391 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4393 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
4394 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4395 Date: Fri Oct 19 17:51:40 2007 -0500
4397 fsl_pci_init enable COMMAND_MEMORY if inbound window
4399 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
4400 to pciauto_setup_device has the side effect of not getting
4403 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4405 commit e9d0d527992566ebef9826962ff1745b2f082b92
4406 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4407 Date: Fri Oct 19 10:55:24 2007 +0200
4409 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
4411 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4413 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
4414 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4415 Date: Fri Oct 19 08:10:15 2007 +0200
4417 fix warning: no return statement in function returning non-void
4419 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4421 commit e78220f6e514206757acfe247297fc9a328a881f
4422 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4423 Date: Fri Oct 19 06:33:45 2007 +0200
4425 xsengine: Fix no partition type specified, use DOS as default
4427 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4429 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
4430 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4431 Date: Fri Oct 19 00:24:59 2007 +0200
4433 lubbock: Fix no partition type specified, use DOS as default
4435 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4437 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
4438 Author: Wolfgang Denk <wd@denx.de>
4439 Date: Tue Oct 23 16:50:03 2007 +0200
4441 Coding style: keep lists sorted; update CHANGELOG
4443 Signed-off-by: Wolfgang Denk <wd@denx.de>
4445 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
4446 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4447 Date: Fri Oct 19 00:09:05 2007 +0200
4449 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
4451 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4453 commit 96455bfebc9887837095c9051d216f53c61b5f10
4454 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4455 Date: Fri Oct 19 00:07:39 2007 +0200
4457 Fix warning differ in signedness in board/innokom/innokom.c
4459 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4461 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
4462 Author: Marcel Ziswiler <marcel@ziswiler.com>
4463 Date: Fri Oct 19 00:25:33 2007 +0200
4465 fix pxa255_idp board
4467 The pxa255_idp being an old unmaintained board showed several issues:
4468 1. CONFIG_INIT_CRITICAL was still defined.
4469 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
4470 3. Symbol flash_addr was undeclared.
4471 4. The boards lowlevel_init function was still called memsetup.
4472 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
4473 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
4474 'target CPU does not support interworking' warnings on recent compilers.
4475 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
4476 indexes rather than the register definitions from the pxa-regs header
4477 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
4478 avoid any ambiguities.
4479 8. There were several redefinition warnings concerning ICMR, OSMR3,
4480 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
4481 9. The board configuration file was rather outdated.
4482 10. The part header file defined the vendor, product and revision arrays
4483 as unsigned chars instead of just chars in the block_dev_desc_t
4486 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
4488 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
4489 Author: Rune Torgersen <runet@innovsys.com>
4490 Date: Wed Oct 17 11:56:31 2007 -0500
4492 Make MPC8266ADS command selection more robust
4494 Fix MPC8266 command line definition so it won't break when new commands
4495 are added to u-boot.
4496 Signed-off-by Rune Torgersen <runet@innovsys.com>
4498 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
4499 Author: Bartlomiej Sieka <tur@semihalf.com>
4500 Date: Tue Oct 23 13:14:10 2007 +0200
4502 Motion-PRO: Update configuration to accomodate next generation board.
4504 New board has faster oscillator and a different Flash chip. This affects:
4507 - Flash CS configuration (timings)
4508 - Flash sector size, and thus MTD partition layout
4509 - malloc() arena size (due to bigger Flash sectors)
4510 - smaller memory test range (due to bigger malloc() arena)
4512 This patch also enables more extensive memory testing via "mtest".
4514 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4516 commit eff501904df2bf1724a750062628ba2c51dbb1f8
4517 Author: Bartlomiej Sieka <tur@semihalf.com>
4518 Date: Tue Oct 23 11:36:07 2007 +0200
4520 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
4522 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
4523 register must be written a value of 0x00000004 as the first step of the
4524 SDRAM contorller configuration.
4526 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4528 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
4529 Author: Peter Pearse <peter.pearse@arm.com>
4530 Date: Tue Oct 23 10:22:16 2007 +0100
4532 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
4534 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
4535 Author: Stefan Roese <sr@denx.de>
4536 Date: Tue Oct 23 10:17:42 2007 +0200
4538 ppc4xx: lwmon5: Some further GPIO config changes
4540 Signed-off-by: Stefan Roese <sr@denx.de>
4542 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
4543 Author: Vlad Lungu <vlad@comsys.ro>
4544 Date: Sun Oct 21 22:10:10 2007 +0900
4546 [MIPS] Fix UNCACHED_SDRAM
4548 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
4550 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4551 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4553 commit 00101dd7a32d12f698150123e47e4b3420279f86
4554 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4555 Date: Sun Oct 21 21:30:42 2007 +0900
4557 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
4559 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4561 commit eb700636db017d310edaeb559b13d82588560674
4562 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4563 Date: Sun Oct 21 10:55:37 2007 +0900
4565 [MIPS] u-boot.lds: Define _gp in a standard manner
4567 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4569 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
4570 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4571 Date: Sun Oct 21 10:55:36 2007 +0900
4573 [MIPS] Fix $gp usage
4575 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
4576 As a general principle, we should use _gp for $gp.
4578 Thanks to linker script's help we fortunately have _gp which equals to
4579 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
4580 be able to access to GOT entires, global variables and procedure entry
4581 points. The right thing to do is to use _gp.
4583 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
4584 which holds the offset from _gp. When updating GOT entries, we use this
4585 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
4587 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
4588 I made some change to leave over num_got_entries.
4590 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4591 Cc: Vlad Lungu <vlad@comsys.ro>
4593 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
4594 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4595 Date: Sun Oct 21 10:55:36 2007 +0900
4597 [MIPS] u-boot.lds: Fix __got_start and __got_end
4599 Ensure that __got_start points to top of the `.got', and __got_end points
4600 to bottom as well, so that we never fail to count num_got_entries.
4602 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4604 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
4605 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4606 Date: Sun Oct 21 10:55:36 2007 +0900
4608 [MIPS] u-boot.lds: Remove duplicated .sdata section
4610 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4612 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
4613 Author: Wolfgang Denk <wd@denx.de>
4614 Date: Sun Oct 21 01:01:17 2007 +0200
4616 Minor coding style cleanup; update CHANGELOG
4618 Signed-off-by: Wolfgang Denk <wd@denx.de>
4620 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
4621 Author: Vlad Lungu <vlad@comsys.ro>
4622 Date: Thu Oct 4 20:47:10 2007 +0300
4626 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
4627 to do anything in eth_stop() if eth_init() was not called.
4628 Simplified RX path in order to avoid timeouts on really really
4629 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
4630 clever enough to cope with 1 packet per eth_rx().
4632 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4634 commit df90968b48fb34fa9072fab150db2ac89678f537
4635 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
4636 Date: Mon Sep 24 13:32:13 2007 -0400
4638 Setting MSR[DE] in do_reset
4641 This patch ensures the soft reset of the board for the 85xx boards
4642 by setting the MSR[DE] in the do_reset function.
4644 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
4646 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
4647 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
4648 Date: Mon Sep 24 13:36:01 2007 -0400
4653 This patch fixes the MSR overwrite in the start.S when moving out of
4656 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
4658 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
4659 Author: Dan Wilson <dwilson@fulcrummicro.com>
4660 Date: Fri Oct 19 11:33:48 2007 -0500
4662 tsec driver should clear RHALT on startup
4664 This was causing problems for some people.
4666 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
4667 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
4668 Signed-off-by: Andy Fleming <afleming@freescale.com>
4670 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
4671 Author: Kumar Gala <galak@kernel.crashing.org>
4672 Date: Thu Oct 11 00:29:18 2007 -0500
4674 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
4676 On the MPC85xx CDS we have two issues:
4678 1. The device tree fixup code did not check to see if the property we are
4679 trying to update is actually found. Its possible that it would update
4680 random memory starting at 0.
4682 2. Newer Linux kernel's have moved the location of the PCI nodes to be
4683 sibilings of the soc node and not children. The explicit PATH to the PCI
4684 node would not be found for these device trees. Add the ability to handle
4685 both paths. In the future we shouldn't handle such fixups by explicit path.
4687 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4689 commit a3063eec775719b7e91023bbec3f64b3118791df
4690 Author: Kumar Gala <galak@kernel.crashing.org>
4691 Date: Thu Oct 11 00:18:48 2007 -0500
4693 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
4695 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
4696 console. Make it so we match that config what we tell Linux as the early
4699 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4701 commit e1ce3cb617bb06f91f82f98915391175addf3e82
4702 Author: Kumar Gala <galak@kernel.crashing.org>
4703 Date: Tue Oct 2 11:12:27 2007 -0500
4705 Remove magic numbers from cache related operations for mpc85xx
4707 The mpc85xx start code uses some magic numbers that we actually
4708 have #defines for in <config.h> so use those instead.
4710 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4712 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
4713 Author: Detlev Zundel <dzu@denx.de>
4714 Date: Fri Oct 19 16:47:26 2007 +0200
4718 Signed-off-by: Detlev Zundel <dzu@denx.de>
4720 commit 281df457c1aa50d2752165d0c5c3282d4027b974
4721 Author: Tony Li <tony.li@freescale.com>
4722 Date: Thu Oct 18 17:47:19 2007 +0800
4724 mpc83xx: Add configure entry for MPC83xx ATM support
4726 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
4729 Signed-off-by: Tony Li <tony.li@freescale.com>
4730 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4732 commit d2646554f529a9577515eceb0ec5eceee18244ba
4733 Author: Tony Li <tony.li@freescale.com>
4734 Date: Thu Oct 18 17:44:38 2007 +0800
4736 mpc83xx: pq-mds-pib.c typo error
4738 Correct to val8 from val.
4740 Signed-off-by: Tony Li <tony.li@freescale.com>
4741 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4743 commit 3e11ae80fec1ee12194940955431186abf6009c2
4744 Author: Stefan Roese <sr@denx.de>
4745 Date: Wed Oct 17 15:40:19 2007 +0200
4747 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
4749 Signed-off-by: Stefan Roese <sr@denx.de>
4751 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
4752 Author: Jon Loeliger <jdl@freescale.com>
4753 Date: Tue Oct 16 15:27:43 2007 -0500
4755 Initial mpc8610hpcd Makefile files.
4757 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4758 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
4759 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4760 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4762 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
4763 Author: Jon Loeliger <jdl@freescale.com>
4764 Date: Tue Oct 16 15:26:51 2007 -0500
4766 Initial mpc8610hpcd cpu/, README and include/ files.
4768 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4769 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
4770 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4773 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
4774 Author: Jon Loeliger <jdl@freescale.com>
4775 Date: Tue Oct 16 13:54:01 2007 -0500
4777 Initial mpc8610hpcd board files.
4779 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4780 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
4781 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4782 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4784 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
4785 Author: runet@innovsys.com <runet@innovsys.com>
4786 Date: Tue Oct 16 14:50:40 2007 -0500
4788 Make MPC8266ADS board compile again.
4790 Signed-off-by: Runet Torgersen <runet@innovsys.com>
4792 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
4793 Author: Jon Loeliger <jdl@freescale.com>
4794 Date: Mon Aug 27 12:41:03 2007 -0500
4796 86xx: Allow for fewer DDR slots per memory controller.
4798 As a direct correlation exists between DDR DIMM slots
4799 and SPD EEPROM addresses used to configure them, use
4800 the individually defined SPD_EEPROM_ADDRESS* values to
4801 determine if a DDR DIMM slot should have its SPD
4802 configuration read or not.
4804 Effectively, this now allows for 1 or 2 DIMM slots
4805 per memory controller.
4807 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4809 commit 4d4a945e189a2f384c66432316da2788a0ac1607
4810 Author: Rodolfo Giometti <giometti@enneenne.com>
4811 Date: Mon Oct 15 11:59:17 2007 +0200
4813 PXA USB OHCI: "usb stop" implementation.
4815 Some USB keys need to be switched off before loading the kernel
4816 otherwise they can remain in an undefined status which prevents them
4817 to be correctly recognized by the kernel.
4819 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
4821 commit e2e93442e558cf1500e92861f99713b2f045ea22
4822 Author: Stefan Roese <sr@denx.de>
4823 Date: Mon Oct 15 11:39:00 2007 +0200
4825 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
4827 The I2C bootstrap values that can be setup via the "bootstrap" command,
4828 were setup incorrect regarding the generation of the internal sync PCI
4829 clock. The values for PLB clock == 133MHz were slighly incorrect and the
4830 values for PLB clock == 166MHz were totally incorrect. This could
4831 lead to a hangup upon booting while PCI configuration scan.
4833 This patch fixes this issue and configures valid PCI divisor values
4834 for the sync PCI clock, with respect to the provided external async
4837 Here the values of the formula in the chapter 14.2 "PCI clocking"
4838 from the 440EPx users manual:
4840 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
4842 33MHz async PCI frequency:
4844 => 32 <= 44.3 <= 65 (div = 3)
4847 => 32 <= 55.3 <= 65 (div = 3)
4849 66MHz async PCI frequency:
4851 => 65 <= 66.5 <= 132 (div = 2)
4854 => 65 <= 83 <= 132 (div = 2)
4856 Signed-off-by: Stefan Roese <sr@denx.de>
4858 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
4859 Author: Stefan Roese <sr@denx.de>
4860 Date: Mon Oct 15 11:29:33 2007 +0200
4862 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
4864 The BCSR status bit for the 66MHz PCI operation was correctly
4865 addressed (MSB/LSB problem). Now the correct currently setup
4866 PCI frequency is displayed upon bootup.
4868 This patch also fixes this problem on Rainier & Yellowstone, since these
4869 boards use the same souce code as Sequoia & Yosemite do.
4871 Signed-off-by: Stefan Roese <sr@denx.de>
4873 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
4874 Author: Martin Krause <martin.krause@tqs.de>
4875 Date: Wed Sep 26 17:55:56 2007 +0200
4877 TQM860M: adjust for doubled flash sector size.
4879 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
4880 doubled sector size.
4882 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4884 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
4885 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
4886 Date: Wed Sep 26 17:55:54 2007 +0200
4888 TQM8xx: Fix CAN timing.
4890 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4892 commit d43e489baf02afae49077791fb22332d240d8656
4893 Author: Martin Krause <martin.krause@tqs.de>
4894 Date: Thu Sep 27 14:54:36 2007 +0200
4896 TQM866M: fix SDRAM refresh
4898 At 133 MHz the current SDRAM refresh rate is too fast
4899 (measured 4 * 1.17 us).
4900 CFG_MAMR_PTA changes from 39 to 97. This result
4901 in a refresh rate of 4 * 7.8 us at the default clock
4902 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
4903 This is a compromise until a new method is found to
4904 adjust the refresh rate.
4906 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4908 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
4909 Author: Martin Krause <martin.krause@tqs.de>
4910 Date: Wed Sep 26 17:55:55 2007 +0200
4912 TQM866M: adjust for doubled flash sector size.
4914 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
4915 doubled sector size.
4917 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4919 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
4920 Author: Michal Simek <monstr@monstr.eu>
4921 Date: Sun Oct 14 16:12:29 2007 +0200
4923 [FIX] XUPV2P change command handling
4924 and remove code violation
4926 commit 636400198228d96983c06657b17f760f5989958e
4927 Author: Wolfgang Denk <wd@denx.de>
4928 Date: Sun Oct 14 00:13:19 2007 +0200
4930 Prepare for 1.3.0-rc3 release
4932 Signed-off-by: Wolfgang Denk <wd@denx.de>
4934 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
4935 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4936 Date: Sat Sep 29 13:41:37 2007 +0200
4938 Fix warning differ in signedness in cpu/pxa/mmc.c
4940 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4942 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
4943 Author: Wolfgang Denk <wd@denx.de>
4944 Date: Sat Oct 13 23:51:14 2007 +0200
4946 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
4948 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4949 Signed-off-by: Wolfgang Denk <wd@denx.de>
4951 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
4952 Author: Wolfgang Denk <wd@denx.de>
4953 Date: Sat Oct 13 21:15:39 2007 +0200
4955 Coding Style cleanup.
4957 Signed-off-by: Wolfgang Denk <wd@denx.de>
4959 commit e1893815b0999410d7a327589611c7b38e95299e
4960 Author: Wolfgang Denk <wd@denx.de>
4961 Date: Fri Oct 12 15:49:39 2007 +0200
4965 Signed-off-by: Wolfgang Denk <wd@denx.de>
4967 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
4968 Author: Grzegorz Bernacki <gjb@semihalf.com>
4969 Date: Tue Oct 9 13:58:24 2007 +0200
4971 [ads5121] EEPROM support added.
4973 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
4975 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
4976 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
4977 Date: Sat Oct 6 18:55:35 2007 +0200
4979 AVR32: Initialize bi_flash* in board_init_r
4981 The ATSTK1000-specific flash driver intializes bi_flashstart,
4982 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
4985 Initialize these in board_init_r instead so that things will still be
4986 set up correctly when we switch to the CFI driver.
4988 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4990 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
4991 Author: Marian Balakowicz <m8@semihalf.com>
4992 Date: Fri Oct 5 10:40:54 2007 +0200
4994 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
4996 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4998 commit 92869195ef8210758d2176230c0a36897afd50ed
4999 Author: Bartlomiej Sieka <tur@semihalf.com>
5000 Date: Fri Oct 5 09:46:06 2007 +0200
5002 CM5200: Fix missing null-termination in hostname manipulation code
5004 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5006 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
5007 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5008 Date: Tue Oct 2 19:09:01 2007 +0200
5010 Fix memtest breakage
5012 CFG_MEMTEST_START uses weird magic involving gd, which fails to
5013 compile. Use hardcoded values instead (we actually know how much RAM
5016 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5018 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
5019 Author: Stefan Roese <sr@denx.de>
5020 Date: Tue Oct 2 11:44:46 2007 +0200
5022 ppc4xx: Coding style cleanup
5024 Signed-off-by: Stefan Roese <sr@denx.de>
5026 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
5027 Author: Stefan Roese <sr@denx.de>
5028 Date: Tue Oct 2 11:44:19 2007 +0200
5030 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
5032 Signed-off-by: Stefan Roese <sr@denx.de>
5034 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
5035 Author: Grzegorz Bernacki <gjb@semihalf.com>
5036 Date: Mon Oct 1 09:51:50 2007 +0200
5038 Program EPLD to force full duplex mode for PHY.
5040 EPLD forces modes of PHY operation. By default full duplex is turned off.
5041 This fix turns it on.
5043 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5045 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
5046 Author: Timo Ketola <timo.ketola@exertus.fi>
5047 Date: Mon Sep 24 14:50:32 2007 +0300
5049 Bugfix: Use only one PTD for one endpoint
5051 Original isp116x-hcd code prepared multiple PTDs for longer than 16
5052 byte transfers for one endpoint. That is unnecessary because the
5053 ISP116x is able to split long data from one PTD into multiple
5054 transactions based on the buffer size of the endpoint. It also caused
5055 serious problems if the endpoint NAKed some of the transactions. In
5056 that case ISP116x wouldn't notice that the other PTDs were for the same
5057 endpoint and would try the other PTDs possibly out of order. That would
5058 break the whole transfer.
5060 This patch makes isp116x_submit_job to use one PTD for one transfer.
5062 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
5063 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5065 commit 86ec86c04326c3913178a7679aa910de071da75d
5066 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5067 Date: Thu Sep 27 23:27:47 2007 +0200
5069 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
5071 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5073 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
5074 Author: Stefan Roese <sr@denx.de>
5075 Date: Tue Sep 11 14:12:55 2007 +0200
5077 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
5079 Signed-off-by: Stefan Roese <sr@denx.de>
5081 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
5082 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5083 Date: Wed Sep 26 16:35:54 2007 -0500
5085 85xx io out functions need sync after write.
5087 This fixes the mc146818 rtc_read/write functions for 85xx.
5089 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
5091 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
5092 Author: Grant Likely <grant.likely@secretlab.ca>
5093 Date: Tue Sep 25 15:48:05 2007 -0600
5095 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
5097 CFG_FPGA_XILINX is a bit value used to test against the value in
5098 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
5099 think that is the intention in this code.
5101 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5103 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
5104 Author: Michal Simek <monstr@monstr.eu>
5105 Date: Mon Sep 24 00:41:30 2007 +0200
5107 [FIX] change command handling and removing code violation
5109 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
5110 Author: Michal Simek <monstr@monstr.eu>
5111 Date: Mon Sep 24 00:36:06 2007 +0200
5113 [FIX] change sets of commands
5114 because changing of command handling brings
5115 compilation problems
5117 commit cb1bc63b75a232571eb69aa2c8aa919321655845
5118 Author: Michal Simek <monstr@monstr.eu>
5119 Date: Mon Sep 24 00:30:42 2007 +0200
5121 [FIX] Email reparation & Copyright
5122 Both codes are written by myself without any
5125 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
5126 Author: Michal Simek <monstr@monstr.eu>
5127 Date: Mon Sep 24 00:25:11 2007 +0200
5129 [PATCH] Change macro name for UartLite
5130 because PowerPC 405 can use UartLite as console
5132 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
5133 Author: Michal Simek <monstr@monstr.eu>
5134 Date: Mon Sep 24 00:21:19 2007 +0200
5136 [PATCH] Add support for design without interrupt controller
5139 commit 0731933ec8ec45d02ba89b52df673d526873cdde
5140 Author: Michal Simek <monstr@monstr.eu>
5141 Date: Mon Sep 24 00:19:48 2007 +0200
5143 [FIX] resolve problem with cpu without barrel shifter
5145 commit db14d77995ce515b728b178b63f82babe60e3d56
5146 Author: Michal Simek <monstr@monstr.eu>
5147 Date: Mon Sep 24 00:18:46 2007 +0200
5149 [FIX] repair email address
5151 commit 481d4328618804add1f818a6c96296121cd0528e
5152 Author: Michal Simek <monstr@monstr.eu>
5153 Date: Mon Sep 24 00:17:42 2007 +0200
5155 [FIX] repair MFSL commands
5157 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
5158 Author: Michal Simek <monstr@monstr.eu>
5159 Date: Mon Sep 24 00:08:37 2007 +0200
5161 synchronizition with mainline
5163 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
5164 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5165 Date: Sun Sep 23 02:42:38 2007 +0900
5167 sh: Add support command of ide with sh
5169 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5171 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
5172 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5173 Date: Sun Sep 23 02:38:42 2007 +0900
5177 Add support MS7722SE01 to Makefile.
5179 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5181 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
5182 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5183 Date: Sun Sep 23 02:31:13 2007 +0900
5185 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
5187 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5189 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
5190 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5191 Date: Sun Sep 23 02:19:24 2007 +0900
5193 sh: Update MS7750SE01 platform
5195 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5197 commit 516ad760db3553766267ada01b7d5d727faa4bbd
5198 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5199 Date: Sun Sep 23 02:17:08 2007 +0900
5201 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
5203 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5205 commit b02bad128669e567fce87d8df823b06a0144b8db
5206 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5207 Date: Sun Sep 23 02:12:30 2007 +0900
5209 sh: Update core code of SuperH.
5211 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5213 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
5214 Author: Wolfgang Denk <wd@denx.de>
5215 Date: Thu Sep 20 00:04:14 2007 +0200
5219 Signed-off-by: Wolfgang Denk <wd@denx.de>
5221 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
5222 Author: Wolfgang Denk <wd@denx.de>
5223 Date: Tue Sep 18 21:36:35 2007 +0200
5225 Avoid compiler warning.
5227 Signed-off-by: Wolfgang Denk <wd@denx.de>
5229 commit 8a783a65851bc7421ab69f442261215e21b8891a
5230 Author: Grant Likely <grant.likely@secretlab.ca>
5231 Date: Tue Sep 18 12:24:57 2007 -0600
5233 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
5235 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
5236 nulls in a string differently. For example, the following statement:
5237 echo "this is a string\0" > afile
5238 Will produce the following with /bin/bash:
5239 "this is a string\0"
5240 But with /bin/dash, will produce:
5243 Bug fixed by moving the embedded null out of the makefile and into the
5244 config header. Also renamed the macro to avoid usage colision with the same
5245 macro used by other board ports.
5247 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5249 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
5250 Author: Wolfgang Denk <wd@denx.de>
5251 Date: Tue Sep 18 17:40:27 2007 +0200
5253 MCC200: fix build warning
5255 The MCC200 board config file includes version.h for some customer-
5256 specific setting, which causes warnings with "make depend"; build
5257 version.h before depend.
5259 Signed-off-by: Wolfgang Denk <wd@denx.de>
5261 commit bd86220f58b99d6896198c385fda132f0c980915
5262 Author: Peter Pearse <peter.pearse@arm.com>
5263 Date: Tue Sep 18 13:07:54 2007 +0100
5265 Move coloured led API to status_led.h
5266 Improve indentation in drivers/at45.c
5268 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
5269 Author: Eirik Aanonsen <eaa@wprmedical.com>
5270 Date: Tue Sep 18 08:47:20 2007 +0200
5272 Update atstk1002 bootargs.
5274 Updates to atstk1002 U-Boot header file:
5276 * Set the bootargs for at1002 to point to the SD-card partition instead
5277 * ... of the boot flash.
5278 * Removing the rootfstype since that argument are not needed.
5280 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
5281 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5283 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
5284 Author: Eirik Aanonsen <eaa@wprmedical.com>
5285 Date: Wed Sep 12 13:32:37 2007 +0200
5287 Add some comments to clocks in atstk1002.h
5289 This patch applies some clarifying comments to how the different
5290 clocks are setup according to atstk1002.h Some of the previous
5291 comments where stating wrongful information.
5293 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5295 commit 97213f32416ead885deafea86774e912ffd60ad0
5296 Author: David Saada <David.Saada@ecitele.com>
5297 Date: Mon Sep 17 17:04:47 2007 +0200
5299 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
5301 Signed-off-by: David Saada <david.saada@ecitele.com>
5303 commit 30363e98fa470fbecea5e8bc0f1443352754f303
5304 Author: Stefan Roese <sr@denx.de>
5305 Date: Mon Sep 17 08:20:47 2007 +0200
5307 Small whitespace cleanup of OneNAND patch
5309 Signed-off-by: Stefan Roese <sr@denx.de>
5311 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
5312 Author: Kyungmin Park <kmpark@infradead.org>
5313 Date: Mon Sep 10 17:15:14 2007 +0900
5315 OneNAND support (take #2)
5317 [PATCH 3/3] OneNAND support (take #2)
5319 OneNAND support at U-Boot
5321 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5323 commit 17aa2800457df0c06b41516f46f126712c196219
5324 Author: Kyungmin Park <kmpark@infradead.org>
5325 Date: Mon Sep 10 17:14:34 2007 +0900
5327 OneNAND support (take #2)
5329 [PATCH 2/3] OneNAND support (take #2)
5331 OneNAND support at U-Boot
5333 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5335 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
5336 Author: Kyungmin Park <kmpark@infradead.org>
5337 Date: Mon Sep 10 17:13:49 2007 +0900
5339 OneNAND support (take #2)
5341 [PATCH 1/3] OneNAND support (take #2)
5343 OneNAND support at U-Boot
5345 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5347 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
5348 Author: Michal Simek <monstr@monstr.eu>
5349 Date: Sun Sep 16 20:51:57 2007 +0200
5351 [FIX] remove files form repository
5353 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
5354 Author: Wolfgang Denk <wd@denx.de>
5355 Date: Sun Sep 16 17:10:04 2007 +0200
5357 TQM8xx[LM]: Fix broken environment alignment.
5359 With recent toolchains, the environment sectors were no longer aligned to
5360 sector boundaries. The reason was a combination of two bugs:
5362 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
5363 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
5364 this gets defined, is not included here (and cannot be included
5365 without causing lots of problems).
5367 Added a new #define CFG_USE_PPCENV for all boards which really
5368 want to put the environment is a ".ppcenv" section.
5370 2) The linker scripts just include environment.o, silently assuming
5371 that the objects in that file are really in the order in which
5372 they are coded in the C file, i. e. "environment" first, then
5373 "redundand_environment", and "env_size" last. However, current
5374 toolchains (GCC-4.x) reorder the objects, causing the environment
5375 data not to start on a flash sector boundary:
5379 40008000 T environment 40008000 T env_size
5380 4000c000 T redundand_environment 40008004 T redundand_environment
5381 40010000 T env_size 4000c004 T environment
5383 Note: this patch fixes just the first part, and cures the alignment
5384 problem by making sure that "env_size" gets placed correctly. However,
5385 we still have a potential issue because primary and redundant
5386 environment sectors are actually swapped, i. e. we have now:
5388 40008000 T redundand_environment
5389 4000c000 T environment
5392 This shall be fixed in the next version.
5394 Signed-off-by: Wolfgang Denk <wd@denx.de>
5396 commit eb6da8050797c204c9d010548424186c7ce32fc1
5397 Author: Wolfgang Denk <wd@denx.de>
5398 Date: Sun Sep 16 02:39:35 2007 +0200
5400 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
5402 Signed-off-by: Wolfgang Denk <wd@denx.de>
5404 commit cd2d1602c54cc6957bdef3872272a4b264893960
5405 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
5406 Date: Mon Sep 10 14:54:56 2007 -0400
5410 Fixup for the break statement in wrong place.
5412 [Patch by urwithsughosh@gmail.com]
5413 Acked-by: Andy Fleming <afleming@freescale.com>
5414 Signed-off-by: Wolfgang Denk <wd@denx.de>
5416 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
5417 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5418 Date: Tue Sep 11 17:04:00 2007 +0200
5420 Fix do_div() usage in nand process output
5422 Fix usage of do_div() in nand erase|read|write process output.
5424 The last patch to nand_util.c introduced do_div() instead of libgcc's
5425 implementation. But do_div() returns the quotient in its first
5426 macro parameter and not as result.
5428 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5430 commit c750d2e6692a000a82f29de7bf24e3dc21239161
5431 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5432 Date: Wed Sep 12 12:36:53 2007 +0200
5434 NAND: Add CFG_NAND_QUIET option
5436 This config option sets the default for the progress information
5437 output behavior that can also be configured through the 'quiet'
5438 environment variable.
5440 The legacy NAND code does not print the current progress info
5441 on the console. So this option is for backward compatibility for
5442 units that are in the field and where setting the quiet variable
5443 is not an option. With CFG_NAND_QUIET set to '1' the console
5444 progress info is turned off. This can still be overwritten
5445 through the environment variable.
5447 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5449 commit dcb88630290d2bcd803386dd4c2be73142994c4f
5450 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
5451 Date: Thu Sep 13 16:06:05 2007 -0700
5453 ColdFire: fix build error becasue of bad type of mii_init()
5455 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
5457 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
5458 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
5459 Date: Thu Sep 13 16:04:05 2007 -0700
5461 ColdFire: Fix build error caused by pixis.c
5463 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
5465 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
5467 commit e21659e30660a1377c42af135a6114efe39801d9
5468 Author: Sam Sparks <SSparks@twacs.com>
5469 Date: Fri Sep 14 11:14:42 2007 -0600
5471 Update MPC8349ITX*_config to place config.tmp in right place.
5473 MPC834ITX*_config does not store config.tmp at the correct locatation,
5474 causing MPC8349ITXGP to have the wrong TEXT_BASE.
5476 Signed-off-by: Sam Sparks <SSparks@twacs.com>
5477 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5479 commit 1218abf1b5817a39a82399b4b928b00750575bda
5480 Author: Wolfgang Denk <wd@denx.de>
5481 Date: Sat Sep 15 20:48:41 2007 +0200
5483 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
5485 Signed-off-by: Wolfgang Denk <wd@denx.de>
5487 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
5488 Author: Dirk Behme <dirk.behme@googlemail.com>
5489 Date: Sat Sep 15 11:55:42 2007 +0200
5491 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
5493 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
5496 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
5498 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
5500 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
5501 Author: Michal Simek <monstr@monstr.eu>
5502 Date: Sat Sep 15 00:03:35 2007 +0200
5504 Synchronize with U-BOOT mainline
5506 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
5507 Author: Sam Sparks <SSparks@twacs.com>
5508 Date: Fri Sep 14 11:14:42 2007 -0600
5510 Update MPC8349ITX*_config to place config.tmp in right place.
5512 MPC834ITX*_config does not store config.tmp at the correct locatation,
5513 causing MPC8349ITXGP to have the wrong TEXT_BASE.
5515 Signed-off-by: Sam Sparks <SSparks@twacs.com>
5516 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5517 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5519 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
5520 Author: Bartlomiej Sieka <tur@semihalf.com>
5521 Date: Thu Sep 13 18:21:48 2007 +0200
5523 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
5525 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5527 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
5528 Author: Bartlomiej Sieka <tur@semihalf.com>
5529 Date: Thu Sep 13 16:33:59 2007 +0200
5531 tqm5200: Restore customary env. variable boot commands for powerpc kernels
5533 - update default definitions of kernel_addr and fdt_addr env. variables
5534 - make arch/powerpc booting the default scenario
5535 - update MTD partition layout to match the above
5537 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5539 commit f34024d4a328e6edd906456da98d2c537155c4f7
5540 Author: Wolfgang Denk <wd@denx.de>
5541 Date: Wed Sep 12 00:48:57 2007 +0200
5543 Fix memory corruption problem on STX GP3 SSA Board.
5545 Signed-off-by: Wolfgang Denk <wd@denx.de>
5547 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
5548 Author: Peter Pearse <peter.pearse@arm.com>
5549 Date: Tue Sep 11 15:35:01 2007 +0100
5553 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
5554 Author: Grzegorz Bernacki <gjb@semihalf.com>
5555 Date: Tue Sep 11 15:42:11 2007 +0200
5557 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
5558 scan on second pci bus.
5560 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5562 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
5563 Author: Grzegorz Bernacki <gjb@semihalf.com>
5564 Date: Tue Sep 11 12:57:52 2007 +0200
5566 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
5568 Bamboo has a file sdram.c which needs special treatment when building in
5569 separate directory. It has to be linked to build directory otherwise it is
5572 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5574 commit d45963854eff39d575124d859419bb4953ce2c87
5575 Author: Michal Simek <monstr@monstr.eu>
5576 Date: Tue Sep 11 00:37:04 2007 +0200
5578 [FIX] Microblaze ML401 - repare FLASH handling
5580 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
5581 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
5582 Date: Mon Sep 10 16:55:59 2007 +0100
5584 Allocate CPU Architecture Code for STMicroelectronics' ST200.
5586 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
5587 ---------------------------------------------------
5589 commit 754bac48156f8958d8f6a53a51eda88ab5758929
5590 Author: Wolfgang Denk <wd@denx.de>
5591 Date: Mon Sep 10 20:42:31 2007 +0200
5593 Update version to match current state.
5595 Signed-off-by: Wolfgang Denk <wd@denx.de>
5597 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
5598 Author: Grzegorz Bernacki <gjb@semihalf.com>
5599 Date: Mon Sep 10 17:39:08 2007 +0200
5601 [MPC512x] Streamline frame handling in the FEC driver
5603 - convert frame size settings to be derived from a single base
5604 - set frame size to the recommended default value
5606 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5608 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
5609 Author: Kyungmin Park <kmpark@infradead.org>
5610 Date: Mon Sep 10 11:34:00 2007 +0900
5612 Remove compiler warning: target CPU does not support interworking
5614 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5616 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
5617 Author: Wolfgang Denk <wd@denx.de>
5618 Date: Sun Sep 9 21:21:33 2007 +0200
5620 Fix compile error in spc1920 config.
5622 Signed-off-by: Markus Klotzbücher <mk@denx.de>
5623 Signed-off-by: Wolfgang Denk <wd@denx.de>
5625 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
5626 Author: Grant Likely <grant.likely@secretlab.ca>
5627 Date: Fri Sep 7 09:25:07 2007 -0600
5629 Bugfix: make bootm+libfdt compile on boards with no flash
5631 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5633 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
5634 Author: Grzegorz Bernacki <gjb@semihalf.com>
5635 Date: Fri Sep 7 18:35:37 2007 +0200
5637 [PPC440SPe] PCIe environment settings for Katmai and Yucca
5639 - 'pciconfighost' is set by default in order to be able to scan bridges
5640 behind the primary host/PCIe
5642 - 'pciscandelay' env variable is recognized to allow for user-controlled
5643 delay before the PCIe bus enumeration; some peripheral devices require a
5644 significant delay before they can be scanned (e.g. LSI8408E); without the
5645 delay they are not detected
5647 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5649 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
5650 Author: Grzegorz Bernacki <gjb@semihalf.com>
5651 Date: Fri Sep 7 18:20:23 2007 +0200
5653 [PPC440SPe] Improve PCIe configuration space access
5655 - correct configuration space mapping
5656 - correct bus numbering
5657 - better access to config space
5659 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
5660 first device on the first bus. We now allow to configure up to 16 buses;
5661 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
5662 peripheral devices farther in hierarchy can be identified.
5664 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5666 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
5667 Author: Grzegorz Bernacki <gjb@semihalf.com>
5668 Date: Fri Sep 7 17:46:18 2007 +0200
5670 [PPC440SPe] Convert machine check exceptions handling
5672 Convert using fixup mechanism to suppressing MCK for the duration of config
5673 read/write transaction: while fixups work fine with the case of a precise
5674 exception, we identified a major drawback with this approach when there's
5675 an imprecise case. In this scenario there is the following race condition:
5676 the fixup is (by design) set to catch the instruction following the one
5677 actually causing the exception; if an interrupt (e.g. decrementer) happens
5678 between those two instructions, the ISR code is executed before the fixup
5679 handler the machine check is no longer protected by the fixup handler as it
5680 appears as within the ISR code. In consequence the fixup approach is being
5681 phased out and replaced with explicit suppressing of MCK during a PCIe
5682 config read/write cycle.
5684 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5686 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
5687 Author: Wolfgang Denk <wd@denx.de>
5688 Date: Fri Sep 7 17:43:36 2007 +0200
5690 Fix typo in MAKEALL script.
5692 Signed-off-by: Wolfgang Denk <wd@denx.de>
5694 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
5695 Author: Grzegorz Bernacki <gjb@semihalf.com>
5696 Date: Fri Sep 7 17:09:21 2007 +0200
5698 [MPC512x] Proper handling of larger frames in the FEC driver
5700 When frame larger than local RX buffer is received, it is split and handled
5701 by two buffer descriptors. Prior to this patch the FEC driver discarded
5702 contents of a buffer descriptor without the 'LAST' bit set, so the first
5703 part of the frame was lost in case of larger frames. This fix allows to
5704 safely combine the two pieces into the whole frame.
5706 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5708 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
5709 Author: Rafal Jaworowski <raj@semihalf.com>
5710 Date: Fri Sep 7 17:05:36 2007 +0200
5712 [MPC512x] Correct fixup relocation
5714 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5716 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
5717 Author: Wolfgang Denk <wd@denx.de>
5718 Date: Fri Sep 7 01:21:25 2007 +0200
5720 Update CHANGELOG, minor coding style cleanup.
5722 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
5723 Author: stefano babic <sbabic@denx.de>
5724 Date: Thu Aug 30 23:01:49 2007 +0200
5726 PXA270: Added support for TrizepsIV board.
5728 This patch add support for the Trizeps IV module (520Mhz).
5730 Signed-off-by: Stefano Babic <sbabic@denx.de>
5732 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
5733 Author: stefano babic <sbabic@denx.de>
5734 Date: Thu Aug 30 22:57:04 2007 +0200
5736 PXA270: Add support for multiple serial ports.
5738 This patch adds support for multiple serial ports to the PXA target.
5739 FFUART, BTUART and STUART are supported.
5741 Signed-off-by: Stefano Babic <sbabic@denx.de>
5743 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
5744 Author: stefano babic <sbabic@denx.de>
5745 Date: Thu Aug 30 22:48:47 2007 +0200
5747 PXA270: fix compile issue (invalid lvalue)
5749 Code is broken for PXA270 due to "invalid lvalue in assignment".
5751 This patch fix it in pxa-regs.h
5753 Signed-off-by: Stefano Babic <sbabic@denx.de>
5755 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
5756 Author: Jason Jin <Jason.jin@freescale.com>
5757 Date: Thu Aug 30 18:19:05 2007 +0800
5759 Add BUILD_DIR support for bios emulator.
5761 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
5763 commit b4d8a55145442f136982634862341a3e02002bda
5764 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5765 Date: Fri Aug 31 14:41:51 2007 +0900
5767 [MIPS] Remove inline asm string functions
5769 Stop using inline string functions on MIPS as other ARCHs do so,
5770 since the optimized inline asm versions are not small.
5772 This change is triggered by a following MIPS build error:
5773 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
5774 common/exports.c:32: undefined reference to `strcmp'
5775 make: *** [u-boot] Error 1
5777 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5779 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
5780 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5781 Date: Fri Aug 31 14:41:45 2007 +0900
5783 [MIPS] Update asm string header
5785 This patches contains several bugfixes and cleanups in the latest upstream:
5787 - Don't include linux/config.h
5788 - Remove buggy inline version of memscan.
5789 - Merge with Linux 2.6.11-rc3.
5790 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
5791 - Goodbye mips64. 31704 lines of code bite the dust.
5792 - Replace extern inline with static inline.
5793 - Fix return value of strncpy.
5794 - Remove a bunch more "$1" clobbers.
5796 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5798 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
5799 Author: Bartlomiej Sieka <tur@semihalf.com>
5800 Date: Tue Sep 4 17:31:22 2007 +0200
5802 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
5804 Fix incorrect blob address calculation in do_bootm_linux() that prevents
5805 booting the kernel from a multi-file image (kernel + initrd + blob).
5807 Also, make minor updates to the U-Boot's output and to the coding style.
5809 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5811 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
5812 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
5813 Date: Fri Aug 31 14:29:04 2007 +0200
5815 Add support for Sil680 IDE controller.
5817 o add drivers/sil680.c to support the Sil680 IDE-controller.
5818 o drivers/Makefile: add sil680.o.
5820 Signed-off-by: Gary Jennejohn <garyj@denx.de>
5822 commit e79021223bc339df655e360645a52c457a74b067
5823 Author: Grant Likely <grant.likely@secretlab.ca>
5824 Date: Thu Sep 6 09:47:40 2007 -0600
5826 bootm/fdt: Only process the fdt if an fdt address was provided
5828 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
5829 kernels using the board info structure (instead of passing a device tree)
5830 This change allows the old style booting to be used if the fdt argument
5831 was not passed to 'bootm'.
5833 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5834 Acked-by: Kim Phillips <kim.phillips@freescale.com>
5836 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
5837 Author: Grant Likely <grant.likely@secretlab.ca>
5838 Date: Thu Sep 6 09:46:23 2007 -0600
5840 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
5842 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
5844 Tested on: lite5200b
5846 Note: the fixup functions have not been moved to a common place. This
5847 patch is targeted for immediate merging as in solves a build issue, but
5848 the final name/location of the fixups is still subject to debate. I
5849 propose to merge this now, and move the fixups in the next merge window
5850 to be usable by all targets.
5852 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5854 commit 41bb76e941929f54a73206fb132f7a4c275543a3
5855 Author: Grant Likely <grant.likely@secretlab.ca>
5856 Date: Thu Sep 6 09:46:17 2007 -0600
5858 libfdt: add convenience function fdt_find_and_setprop()
5860 Given the path to a node, fdt_find_and_setprop() allows a property value
5863 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5865 commit 80767a6cead9990d9e77e62be947843c2c72f469
5866 Author: Peter Pearse <peter.pearse@arm.com>
5867 Date: Wed Sep 5 16:04:41 2007 +0100
5869 Changed API name to coloured_led.h
5870 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
5871 Tidied other cpu/arm920t/start.S code
5873 commit 56a9270521baaa00e12639a978302a67f61ef060
5874 Author: Kumar Gala <galak@kernel.crashing.org>
5875 Date: Thu Aug 30 16:18:18 2007 -0500
5877 Fix ULI RTC support on MPC8544 DS
5879 The RTC on the M1575 ULI chipset requires a dummy read before
5880 we are able to talk to the RTC. We accomplish this by adding a
5881 second memory region to the PHB the ULI is on and read from it.
5883 The second region is added to maintain compatiabilty with Linux's
5884 view of the PCI memory map.
5886 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5888 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
5889 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5890 Date: Thu Aug 30 01:58:48 2007 -0500
5892 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
5894 pcie is now differentiated from pci. Add 8641 bus-range updates.
5896 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
5898 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
5899 Author: Peter Pearse <peter.pearse@arm.com>
5900 Date: Tue Sep 4 16:18:38 2007 +0100
5902 Add coloured led interface for ARM boards.
5903 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
5905 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
5906 Author: Peter Pearse <peter.pearse@arm.com>
5907 Date: Tue Sep 4 14:49:28 2007 +0100
5909 Move include/led.h to board/at91rm9200dk
5911 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
5912 Author: Peter Pearse <peter.pearse@arm.com>
5913 Date: Tue Sep 4 14:25:51 2007 +0100
5915 Ran Lindent on drivers/at45.c
5917 commit 557ab89d294f08dd532f21d19861b40093200a33
5918 Author: Peter Pearse <peter.pearse@arm.com>
5919 Date: Tue Sep 4 14:23:50 2007 +0100
5921 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
5923 commit 81b73dec16fd1227369a191e725e10044a9d56b8
5924 Author: Gary Jennejohn <garyj@denx.de>
5925 Date: Fri Aug 31 15:21:46 2007 +0200
5927 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
5929 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
5930 set to non-zero, because it doesn't support MRM (memory-read-
5931 multiple) correctly. We now added the possibility to configure
5932 this register in the board config file, so that the default value
5933 of 8 can be overridden.
5935 Here the details of this patch:
5937 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
5938 board-specific settings. As an example the sequoia board requires 0.
5939 Idea from Stefan Roese <sr@denx.de>.
5940 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
5941 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
5942 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
5943 CFG_PCI_CACHE_LINE_SIZE to 0.
5945 Signed-off-by: Gary Jennejohn <garyj@denx.de>
5946 Signed-off-by: Stefan Roese <sr@denx.de>
5948 commit 60174746c668b309378a91488dded898e9553eae
5949 Author: Wolfgang Denk <wd@denx.de>
5950 Date: Fri Aug 31 10:01:51 2007 +0200
5952 Fix TFTP OACK code for short packets.
5954 The old code had a loop limit overflow bug which caused a semi-
5955 infinite loop for small packets, because in "i<len-8", "i" was signed,
5956 but "len" was unsigned, and "len-8" became a huge number for small
5959 This is a workaround which replaces broken commit 8f1bc284.
5961 Signed-off-by: Wolfgang Denk <wd@denx.de>
5963 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
5964 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
5965 Date: Thu Aug 30 15:03:05 2007 +0200
5967 Reduce BOOTDELAY variable to 1 second by default for STK1002
5969 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
5970 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5972 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
5973 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
5974 Date: Thu Aug 30 15:03:04 2007 +0200
5976 Remove double quotation marks around MAC address for STK1002
5978 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
5979 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5981 commit ff13ac8c7bbebb238e339592de765c546dba1073
5982 Author: Wolfgang Denk <wd@denx.de>
5983 Date: Thu Aug 30 14:42:15 2007 +0200
5985 Backout commit 8f1bc284 as it causes TFTP to fail.
5987 Signed-off-by: Wolfgang Denk <wd@denx.de>
5989 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
5990 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5991 Date: Thu Aug 30 02:26:17 2007 -0500
5993 Revert "Fix MPC8544DS PCIe3 scsi."
5995 This reverts commit 9468e680.
5996 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
5998 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6000 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
6001 Author: Grant Likely <grant.likely@secretlab.ca>
6002 Date: Wed Aug 29 18:26:24 2007 -0600
6004 tftp: don't implicity trust the format of recevied packets
6006 The TFTP OACK code trusts that the incoming packet is formated as
6007 ASCII text and can be processed by string functions. It also has a
6008 loop limit overflow bug where if the packet length is less than 8, it
6009 ends up looping over *all* of memory to find the 'blksize' string.
6011 This patch solves the problem by forcing the packet to be null
6012 terminated and using strstr() to search for the sub string.
6014 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6016 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
6017 Author: Stefan Roese <sr@denx.de>
6018 Date: Wed Aug 29 16:31:18 2007 +0200
6020 ppc4xx: Change lwmon5 default environment to support Linux RTC
6022 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
6023 to supply the RTC I2C address as bootline parameter. This patch
6024 adds support for this rtc probing parameter to the bootargs:
6026 "rtc-pcf8563.probe=0,0x51"
6028 Signed-off-by: Stefan Roese <sr@denx.de>
6030 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
6031 Author: Kim Phillips <kim.phillips@freescale.com>
6032 Date: Wed Aug 29 09:06:05 2007 -0500
6034 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
6036 this had slipped through the cracks, since the sbc board was added
6037 after I wrote the original patch to remove all these symbols, and
6038 before it was merged.
6040 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6042 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
6043 Author: Wolfgang Denk <wd@denx.de>
6044 Date: Wed Aug 29 14:05:30 2007 +0200
6046 Add mii_init() prototype
6048 to get rid of a *lot* of compiler warnings.
6050 Signed-off-by: Wolfgang Denk <wd@denx.de>
6052 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
6053 Author: Wolfgang Denk <wd@denx.de>
6054 Date: Wed Aug 29 13:35:03 2007 +0200
6056 Disable network support on cmi_mpc5xx board
6058 ..because it caused compiler errors and there seems to be no
6059 board maintainer to take care of this.
6061 Signed-off-by: Wolfgang Denk <wd@denx.de>
6063 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
6064 Author: Kumar Gala <galak@kernel.crashing.org>
6065 Date: Mon Aug 20 09:44:00 2007 -0500
6067 Fix MPC8544DS PCIe3 scsi.
6069 <ed.swarthout@freescale.com>
6071 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
6072 is allocating memory space it doesn't need.
6074 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
6075 Signed-off-by: Andy Fleming <afleming@freescale.com>
6077 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
6078 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6079 Date: Tue Aug 21 09:38:59 2007 -0500
6083 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
6084 correct consoledev needed for linux boot.
6085 Standardize on fdt{file,addr} var to hold dtb file name.
6087 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
6089 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6091 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
6092 Author: Haiying Wang <Haiying.Wang@freescale.com>
6093 Date: Thu Aug 23 15:20:54 2007 -0400
6095 Enable L2 cache for MPC8568MDS board
6097 The L2 cache size is 512KB for 8568, print out the correct informaiton.
6099 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6101 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
6102 Author: Jason Jin <Jason.jin@freescale.com>
6103 Date: Wed Aug 22 17:54:49 2007 +0800
6105 Remove the bios emulator binary files from MAI board
6107 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6109 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
6110 Author: Kim Phillips <kim.phillips@freescale.com>
6111 Date: Tue Aug 21 17:00:17 2007 -0500
6113 support board vendor-common makefiles
6115 if a board/$(VENDOR)/common/Makefile exists, build it.
6117 also add the first such case, board/freescale/common/Makefile, to
6118 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
6119 dictated by board configuration.
6121 thusly get rid of alternate build dir errors such as:
6123 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
6125 by putting the common/ mkdir command in its proper place (the common
6126 Makefile). Common bits from existing individual board Makefiles have
6129 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6131 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
6132 Author: stefano babic <sbabic@denx.de>
6133 Date: Tue Aug 21 15:52:33 2007 +0200
6135 Fix: TFTP is not working on little endian systems
6137 TFTP does not work anymore after multicast tftp
6138 patch was applied on little endian systems.
6141 Signed-off-by: Stefano Babic <sbabic@denx.de>
6143 commit 5f470948570526e9186f053a3003da7719604e90
6144 Author: stefano babic <sbabic@denx.de>
6145 Date: Tue Aug 21 15:50:33 2007 +0200
6147 Fix MAC address setting in DM9000 driver.
6149 The logic to check if there is a correct MAC address in the DM9000
6150 EEPROM, added in the last patch, is wrong. Now the MAC address is
6151 always taken from the environment, even if a suitable MAC is present
6154 Signed-off-by: Stefano Babic <sbabic@denx.de>
6156 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
6157 Author: Martin Krause <martin.krause@tqs.de>
6158 Date: Tue Aug 21 12:40:34 2007 +0200
6160 MPC5xxx: fix some compiler warnings in USB code
6162 Fix the following warnings:
6163 - usb.c:xx: warning: function declaration isn't a prototype
6164 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
6165 from pointer wihtout a cast
6167 Signed-off-by: Martin Krause <martin.krase@tqs.de>
6169 commit 16e23c3f5dab6937f5109365416808c7f15c122b
6170 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6171 Date: Mon Aug 20 23:55:33 2007 -0500
6173 fsl_pci_init - Remove self PCSRBAR allocation
6175 CPU physical address space was being wasted by allocating a
6176 PCSRBAR PCI inbound region to it's memory space.
6178 As a rule, PCSRBAR should be left alone since it does not affect
6179 transactions from self and other masters may have changed it.
6181 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
6183 commit 0e700ce03a23bb1921149bc77008ace7103d5289
6184 Author: Martin Krause <martin.krause@tqs.de>
6185 Date: Mon Aug 20 13:56:47 2007 +0200
6187 Fix compiler warning in include/s3c2410.h
6189 This patch fixes the "type qualifiers ignored on fuction return tpye"
6190 warning for include/s3c2410.h
6192 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6194 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
6195 Author: Dirk Behme <dirk.behme@googlemail.com>
6196 Date: Mon Aug 20 07:09:05 2007 +0200
6198 Fix compilation error for omap2420h4_config.
6200 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
6201 and flash_probe() calls in env_flash.c.
6203 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
6205 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
6206 Author: Kim Phillips <kim.phillips@freescale.com>
6207 Date: Fri Aug 10 14:34:14 2007 -0500
6209 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
6211 and make some minor corrections to the FDT part of the README.
6213 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6215 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
6216 Author: Wolfgang Denk <wd@denx.de>
6217 Date: Wed Aug 29 01:32:05 2007 +0200
6219 Minor coding style cleanup.
6221 Signed-off-by: Wolfgang Denk <wd@denx.de>
6223 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
6224 Author: Heiko Schocher <hs@pollux.denx.de>
6225 Date: Tue Aug 28 17:40:33 2007 +0200
6227 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
6229 Signed-off-by: Heiko Schocher <hs@denx.de>
6231 commit f98984cb194bb34dbe1db9429d3b51133af30d07
6232 Author: Heiko Schocher <hs@pollux.denx.de>
6233 Date: Tue Aug 28 17:39:14 2007 +0200
6235 IDE: - make ide_inb () and ide_outb () "weak", so boards can
6236 define there own I/O functions.
6237 (Needed for the pcs440ep board).
6238 - The default I/O Functions are again 8 Bit accesses.
6239 - Added CONFIG_CMD_IDE for the pcs440ep Board.
6241 Signed-off-by: Heiko Schocher <hs@denx.de>
6243 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
6244 Author: Semih Hazar <semih.hazar@indefia.com>
6245 Date: Mon Aug 20 19:00:01 2007 +0300
6247 AVR32: Change prototype of memset
6249 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
6250 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6252 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
6253 Author: Yuri Tikhonov <yur@emcraft.com>
6254 Date: Sat Aug 25 05:07:16 2007 +0200
6256 POST: limit memory test area to not touch global data anymore
6258 As experienced on lwmon5, on some boards the POST memory test can
6259 corrupt the global data buffer (bd). This patch fixes this issue
6260 by checking and limiting this area.
6262 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
6263 Signed-off-by: Stefan Roese <sr@denx.de>
6265 commit 75e1a84d483e36be10e206e539b028c4889e1158
6266 Author: Stefan Roese <sr@denx.de>
6267 Date: Fri Aug 24 15:41:42 2007 +0200
6269 ppc4xx: Add RTC POST test to lwmon5 board configuration
6271 Since this RTC POST test is taking quite a while to complete
6272 it's only initiated upon special keypress same as the complete
6275 Signed-off-by: Stefan Roese <sr@denx.de>
6277 commit d7bfa620037a6d2210159387571bdf93aa32c162
6278 Author: Stefan Roese <sr@denx.de>
6279 Date: Fri Aug 24 15:19:10 2007 +0200
6281 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
6283 Signed-off-by: Stefan Roese <sr@denx.de>
6285 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
6286 Author: Stefan Roese <sr@denx.de>
6287 Date: Thu Aug 23 11:02:37 2007 +0200
6289 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
6291 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
6292 board. Now the "eeprom" command can be used to read/write from/to this
6293 device. Additionally a new command was added "eepromwp" to en-/disable
6294 the write-protect of this 2nd EEPROM.
6296 The 1st EEPROM is not affected by this write-protect command.
6298 Signed-off-by: Stefan Roese <sr@denx.de>
6300 commit c64fb30e4c5976007d56fc1789c7a0666082b536
6301 Author: Stefan Roese <sr@denx.de>
6302 Date: Wed Aug 22 08:56:09 2007 +0200
6304 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
6306 Signed-off-by: Stefan Roese <sr@denx.de>
6308 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
6309 Author: Stefan Roese <sr@denx.de>
6310 Date: Tue Aug 21 16:27:57 2007 +0200
6312 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
6314 This patch adds support for the matrix keyboard on the lwmon5 board.
6315 Since the implementation in the dsPCI is kind of compatible with the
6316 "old" lwmon board, most of the code is copied from the lwmon
6319 Signed-off-by: Stefan Roese <sr@denx.de>
6321 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
6322 Author: Wolfgang Denk <wd@denx.de>
6323 Date: Sun Aug 19 10:27:34 2007 +0200
6325 Fix some build errors.
6327 Signed-off-by: Wolfgang Denk <wd@denx.de>
6329 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
6330 Author: Wolfgang Denk <wd@denx.de>
6331 Date: Sat Aug 18 22:00:38 2007 +0200
6335 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
6336 Author: Kim Phillips <kim.phillips@freescale.com>
6337 Date: Thu Aug 16 22:52:39 2007 -0500
6339 lib_ppc: make board_add_ram_info weak
6341 platforms wishing to display RAM diagnostics in addition to size,
6342 can do so, on one line, in their own board_add_ram_info()
6345 this consequently eliminates CONFIG_ADD_RAM_INFO.
6347 Thanks to Stefan for the hint.
6349 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6351 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
6352 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6353 Date: Fri Aug 17 12:43:44 2007 +0900
6355 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
6357 This patch has been sent on:
6360 Many users of PCI config read routines tend to ignore the function
6361 ret value, and are only concerned about the contents of *val. Based
6362 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
6363 the *val on dword read error.
6365 Without this fix, for example, we'll go on scanning bus with vendor or
6366 header_type uninitialized. This brings many unnecessary config trials.
6368 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6370 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
6371 Author: Stefan Roese <sr@denx.de>
6372 Date: Sat Aug 18 14:37:52 2007 +0200
6374 ColdFire: Fix some remaining problems with CFG_CMD_
6376 Signed-off-by: Stefan Roese <sr@denx.de>
6378 commit 8280f6a1c43247616b68224675188e5ccd124650
6379 Author: Stefan Roese <sr@denx.de>
6380 Date: Sat Aug 18 14:33:02 2007 +0200
6382 Coding style cleanup
6384 Signed-off-by: Stefan Roese <sr@denx.de>
6386 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
6387 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6388 Date: Thu Aug 16 19:23:50 2007 -0500
6390 ColdFire: Add M5235EVB Platform for MCF523x
6392 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6394 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
6395 Author: Kim Phillips <kim.phillips@freescale.com>
6396 Date: Fri Aug 17 09:30:00 2007 -0500
6398 mpc83xx: fix typo in DDR2 programming
6400 introduced in the implement board_add_ram_info patch as I was cleaning out the
6401 magic numbers. sorry.
6403 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6405 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
6406 Author: Kim Phillips <kim.phillips@freescale.com>
6407 Date: Thu Aug 16 22:53:09 2007 -0500
6409 mpc83xx: move freescale boards to boards/freescale
6411 includes build fixes.
6413 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6415 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
6416 Author: Kim Phillips <kim.phillips@freescale.com>
6417 Date: Thu Aug 16 22:52:59 2007 -0500
6419 mpc83xx: suppress unused variable 'val8' warning
6421 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6423 commit bbea46f76f767b919070b4829bf34c86bd223248
6424 Author: Kim Phillips <kim.phillips@freescale.com>
6425 Date: Thu Aug 16 22:52:48 2007 -0500
6427 mpc83xx: implement board_add_ram_info
6429 add board_add_ram_info, to make memory diagnostic output more
6430 consistent. u-boot banner output now looks like:
6432 DRAM: 256 MB (DDR1, 64-bit, ECC on)
6434 and for boards with SDRAM on the local bus, a line such as this is
6437 SDRAM: 64 MB (local bus)
6439 also replaced some magic numbers with their equivalent define names.
6441 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6443 commit 14778585d1389d86d5846efec29e5fce892680ce
6444 Author: Tony Li <tony.li@freescale.com>
6445 Date: Fri Aug 17 10:35:59 2007 +0800
6447 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
6449 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
6450 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
6452 Signed-off-by Tony Li <tony.li@freescale.com>
6454 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
6455 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6456 Date: Thu Aug 16 15:05:11 2007 -0500
6458 ColdFire: Add M54455EVB for MCF5445x
6460 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6462 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
6463 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6464 Date: Thu Aug 16 13:20:50 2007 -0500
6466 ColdFire: Add M5253EVBE platform for MCF52x2
6468 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6470 commit a605aacd8324094199402816cc6d9124aba57b8d
6471 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6472 Date: Thu Aug 16 05:04:31 2007 -0500
6474 ColdFire: Add M5249EVB platform for MCF52x2
6476 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6478 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
6479 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6480 Date: Wed Aug 15 20:32:06 2007 -0500
6482 ColdFire: Update Freescale MCF52x2 platforms
6484 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6486 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
6487 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6488 Date: Wed Aug 15 19:55:10 2007 -0500
6490 ColdFire: Update EB+MCF-EV123 platform
6492 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6494 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
6495 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6496 Date: Wed Aug 15 19:46:38 2007 -0500
6498 ColdFire: update TASREG platform for MCF52x2
6500 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6502 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
6503 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6504 Date: Wed Aug 15 19:45:51 2007 -0500
6506 ColdFire: update r5200 platform for MCF52x2
6508 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6510 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
6511 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6512 Date: Wed Aug 15 19:43:20 2007 -0500
6514 ColdFire: idmr platform MCF52x2 update
6516 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6518 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
6519 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6520 Date: Wed Aug 15 19:41:06 2007 -0500
6522 ColdFire: cobra5272 platform for MCF52x2 update
6524 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6526 commit 56115665b4a64c10c01440c57749b265e0908fa4
6527 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6528 Date: Wed Aug 15 19:38:15 2007 -0500
6530 ColdFire: MCF52x2 Header files update
6532 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6534 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
6535 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6536 Date: Wed Aug 15 19:21:21 2007 -0500
6538 ColdFire: MCF52x2 update
6540 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6542 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
6543 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6544 Date: Wed Aug 15 18:46:11 2007 -0500
6546 ColdFire: MCF5329 update cache
6548 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6550 commit 7171977fb8fd77cfb6676953fa9a05789c450513
6551 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6552 Date: Wed Aug 15 15:40:20 2007 -0500
6554 ColdFire: MCF5329 header file clean up
6556 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6558 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
6559 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6560 Date: Wed Aug 15 15:39:17 2007 -0500
6562 ColdFire: MCF5329 Update and cleanup
6564 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6566 commit 10327dc5541f947c0cf7e31fef86c4706169607a
6567 Author: Andy Fleming <afleming@freescale.com>
6568 Date: Thu Aug 16 16:35:02 2007 -0500
6570 Add CONFIG_HAS_ETH0 to all boards with TSEC
6572 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
6573 to update TSEC1's device-tree node, so we need to add it
6574 to all the boards with TSECs. Do this for 83xx and 86xx, too,
6575 since they will eventually do something similar.
6577 Signed-off-by: Andy Fleming <afleming@freescale.com>
6579 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
6580 Author: Kumar Gala <galak@kernel.crashing.org>
6581 Date: Thu Aug 16 15:05:04 2007 -0500
6583 Update MPC8544 DS PCI memory map
6585 The PCIe bus that the ULI M1575 is connected to has no possible way of
6586 needing more than the fixed amount of IO & Memory space needed by the ULI.
6588 So make it use far less IO & memory space and have it use the shared LAW. This
6589 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
6592 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6594 commit ea5877e31ed63ade948fd1293895ec23fe01472e
6595 Author: Kumar Gala <galak@kernel.crashing.org>
6596 Date: Thu Aug 16 11:01:21 2007 -0500
6598 Fix up some fdt issues on 8544DS
6600 It looks like we had a merge issue that duplicated a bit of code
6601 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
6602 the MAC address properly set in the device tree on boot for TSEC1
6604 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6606 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
6607 Author: Niklaus Giger <niklaus.giger@netstal.com>
6608 Date: Thu Aug 16 15:16:03 2007 +0200
6610 PPC4xx:HCU4/5 cleanup
6612 Minor cleanups to confirm to the u-boot coding style.
6613 Some german expressions -> english.
6614 HCU5 enforces a unique IP adress for a given slot in the rack.
6616 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6618 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
6619 Author: Niklaus Giger <niklaus.giger@netstal.com>
6620 Date: Thu Aug 16 15:16:02 2007 +0200
6622 PPC4xx:HCU4/5 cleanup ecc/sdram init
6624 Make ecc initialisation robust, as DDR2-ECC errors may be generated
6625 while zeroing the RAM.
6627 Return 16 bytes (a cacheline) less than the available memory, as the
6628 board and/or PPC440EPx might have problems accessing the last bytes.
6630 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6632 commit d35b508a55508535b6e8445b718585d27df733d3
6633 Author: Kim Phillips <kim.phillips@freescale.com>
6634 Date: Wed Aug 15 22:29:56 2007 -0500
6636 fdt: suppress unused variable 'bd' warning
6638 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6640 commit 82bd9ee77490588d4da785d75829ca63d0176baf
6641 Author: Andy Fleming <afleming@freescale.com>
6642 Date: Wed Aug 15 20:06:50 2007 -0500
6644 Fix warnings from of_data copy fix
6646 Forgot to cast of_flat_tree to ulong.
6648 Signed-off-by: Andy Fleming <afleming@freescale.com>
6650 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
6651 Author: Andy Fleming <afleming@freescale.com>
6652 Date: Wed Aug 15 20:03:44 2007 -0500
6654 Don't wait for disconnected TSECs
6656 The TSEC driver's PHY code waits a long time for autonegotiation to
6657 complete, even if the link is down. The PHY knows the link is
6658 down or up before autonegotiation completes, so we can short-circuit
6659 the process if the link is down.
6661 Signed-off-by: Andy Fleming <afleming@freescale.com>
6663 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
6664 Author: Andy Fleming <afleming@freescale.com>
6665 Date: Wed Aug 15 20:03:34 2007 -0500
6667 Fix numerous bugs in the 8568 UEC support
6669 Actually, fixed a large bug in the UEC for *all* platforms.
6670 How did this ever work?
6672 uec_init() did not follow the spec for eth_init(), and returned
6673 0 on success. Switch it to return the link like tsec_init()
6676 The immap for the 8568 was defined based on MPC8568, rather than
6681 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
6683 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
6686 Signed-off-by: Andy Fleming <afleming@freescale.com>
6688 commit 3a79013e2adda53332dfd0b511066a805e929a9d
6689 Author: Andy Fleming <afleming@freescale.com>
6690 Date: Wed Aug 15 20:03:25 2007 -0500
6692 Define tsec flag values in config files
6694 The tsec_info structure and array has a "flags" field for each
6695 ethernet controller. This field is the only reason there are
6696 settings. Switch to defining TSECn_FLAGS for each controller
6697 in the config header, and we can greatly simplify the array, and
6698 also simplify the addition of future boards.
6700 Signed-off-by: Andy Fleming <afleming@freescale.com>
6702 commit ec7238229507e7f47533a611ea8c53319d234cf3
6703 Author: Andy Fleming <afleming@freescale.com>
6704 Date: Wed Aug 15 20:03:13 2007 -0500
6706 Add support for building all boards with a TSEC
6708 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
6709 Now we can do a MAKEALL test on all of them!
6711 Signed-off-by: Andy Fleming <afleming@freescale.com>
6713 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
6714 Author: Andy Fleming <afleming@freescale.com>
6715 Date: Wed Aug 15 17:30:56 2007 -0500
6717 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
6719 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
6720 neglected to *also* put the code inside the similar #ifdef
6721 for CONFIG_OF_FLAT_TREE.
6723 Signed-off-by: Andy Fleming <afleming@freescale.com>
6725 commit 78f9fef7f406078c8bf7191e665a73f795157746
6726 Author: Scott Wood <scottwood@freescale.com>
6727 Date: Wed Aug 15 15:46:46 2007 -0500
6729 mpc885ads: Don't define CONFIG_BZIP2.
6731 bzip2 requires a significant chunk of malloc space, and there isn't
6732 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
6733 and a downloaded image at 0x400000.
6735 Signed-off-by: Scott Wood <scottwood@freescale.com>
6737 commit 002275a3ed8b114885f6702d6d544d0780dfe689
6738 Author: Michal Simek <Monstr@seznam.cz>
6739 Date: Thu Aug 16 08:54:10 2007 +0200
6741 Bios emulator - fix microblaze toolchain problem
6743 microblaze CPU have problem with bios_emulator code.
6744 Microblaze toolchain doesn't support PRAGMA PACK.
6746 Signed-off-by: Michal Simek <monstr@monstr.eu>
6748 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
6749 Author: Wolfgang Denk <wd@denx.de>
6750 Date: Thu Aug 16 11:51:04 2007 +0200
6752 Minor Coding Style fix; Update CHANGELOG file.
6754 Signed-off-by: Wolfgang Denk <wd@denx.de>
6756 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
6757 Author: Stefan Roese <sr@denx.de>
6758 Date: Thu Aug 16 11:21:49 2007 +0200
6760 ppc4xx: Remove #warning in esd auto_update.c
6762 Signed-off-by: Stefan Roese <sr@denx.de>
6764 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
6765 Author: Stefan Roese <sr@denx.de>
6766 Date: Fri Jun 22 17:32:28 2007 +0200
6768 ppc7xx: Update CPCI750 board
6770 This small CPCI750 update extends the board specific command
6771 "show_config" to display the Marvell strapping registers and
6772 extends the PCI IDE controller.
6774 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
6775 Signed-off-by: Stefan Roese <sr@denx.de>
6777 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
6778 Author: Michal Simek <monstr@monstr.eu>
6779 Date: Thu Aug 16 10:46:28 2007 +0200
6781 [FIX] Changes for bios_emulator code for others architecture
6783 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
6784 Author: Michal Simek <monstr@monstr.eu>
6785 Date: Thu Aug 16 10:45:09 2007 +0200
6787 [FIX] Remove unused include file
6789 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
6790 Author: Stefan Roese <sr@denx.de>
6791 Date: Thu Aug 16 10:18:33 2007 +0200
6793 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
6795 Signed-off-by: Stefan Roese <sr@denx.de>
6797 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
6798 Author: Stefan Roese <sr@denx.de>
6799 Date: Thu Aug 16 09:54:51 2007 +0200
6801 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
6803 Signed-off-by: Stefan Roese <sr@denx.de>
6805 commit 02ba7022f62bb75908296c58c63866e1d294b69a
6806 Author: Stefan Roese <sr@denx.de>
6807 Date: Thu Aug 16 09:52:29 2007 +0200
6809 ppc4xx: Update Sequoia/Rainier bootstrap command
6811 As suggested by David Mitchell, here an update for the Sequoia/Rainier
6814 Signed-off-by: Stefan Roese <sr@denx.de>
6816 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
6817 Author: Kim Phillips <kim.phillips@freescale.com>
6818 Date: Wed Aug 15 22:30:39 2007 -0500
6820 mpc83xx: enable libfdt by default on freescale boards
6822 this enables libfdt code by default for the
6823 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
6824 mpc8349itx and gp boards.
6826 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6828 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
6829 Author: Kim Phillips <kim.phillips@freescale.com>
6830 Date: Wed Aug 15 22:30:33 2007 -0500
6832 mpc83xx: migrate remaining freescale boards to libfdt
6834 this adds libfdt support code for the freescale
6835 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
6838 Boards remain compatible with OF_FLAT_TREE.
6840 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6842 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
6843 Author: Kim Phillips <kim.phillips@freescale.com>
6844 Date: Wed Aug 15 22:30:26 2007 -0500
6846 mpc83xx: move common /memory node update mechanism to cpu.c
6848 also adds common prototypes to include/common.h.
6850 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6852 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
6853 Author: Kim Phillips <kim.phillips@freescale.com>
6854 Date: Wed Aug 15 22:30:19 2007 -0500
6856 mpc83xx: remaining 8360 libfdt fixes
6858 PCI clocks and QE frequencies weren't being updated, and the core clock
6859 was being updated incorrectly. This patch also adds a /memory node if
6860 it doesn't already exist prior to update.
6862 plus some cosmetic trimming to single line comments.
6864 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6866 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
6867 Author: Kim Phillips <kim.phillips@freescale.com>
6868 Date: Wed Aug 15 22:30:12 2007 -0500
6870 mpc83xx: fix UEC2->1 typo in libfdt setup code
6872 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6874 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
6875 Author: Kim Phillips <kim.phillips@freescale.com>
6876 Date: Wed Aug 15 22:30:05 2007 -0500
6878 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
6880 and reorder the existing 83xx maintainers alpha.
6882 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6884 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
6885 Author: Michal Simek <monstr@monstr.eu>
6886 Date: Wed Aug 15 21:15:05 2007 +0200
6888 [FIX] Resolve problem with warnings
6889 microblaze toolchain don't support PRAGMA PACK.
6891 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
6892 Author: Michal Simek <monstr@monstr.eu>
6893 Date: Wed Aug 15 21:05:07 2007 +0200
6895 [FIX] Correction command setting for Microblaze boards
6897 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
6898 Author: Michal Simek <monstr@monstr.eu>
6899 Date: Wed Aug 15 21:03:41 2007 +0200
6901 [FIX] Correction command definition
6903 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
6904 Author: Jon Loeliger <jdl@freescale.com>
6905 Date: Wed Aug 15 11:55:35 2007 -0500
6907 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
6909 Remove a leftover in net/tftp.c while we're at it.
6911 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6913 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
6914 Author: Jon Loeliger <jdl@freescale.com>
6915 Date: Wed Aug 15 12:20:40 2007 -0500
6917 Move the MPC8641HPCN board under board/freescale.
6919 Minor path corrections needed to ensure buildability.
6921 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6923 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
6924 Author: Jon Loeliger <jdl@freescale.com>
6925 Date: Wed Aug 15 11:46:22 2007 -0500
6927 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
6929 Remove a leftover in net/tftp.c while we're at it.
6931 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6933 commit 210f463c71917b7a4495c2103c228b9c179ae64d
6934 Author: Jerry Van Baren <gvb.uboot@gmail.com>
6935 Date: Wed Aug 15 11:13:15 2007 -0400
6937 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
6939 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
6940 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
6941 when it should have gone inside of the conditional. As a result, it
6942 broke non-LIBFDT board builds.
6944 Also added a missing "not." to the comment.
6946 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
6948 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
6949 Author: Niklaus Giger <niklaus.giger@netstal.com>
6950 Date: Wed Aug 15 12:14:23 2007 +0200
6952 PPC4xx:HCU4/5-Board fix compile warning
6954 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6956 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
6957 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6958 Date: Tue Aug 14 14:06:45 2007 -0500
6960 Fix malloc size error in ahci_init_one.
6962 Typically this causes scsi init to corrupt the
6963 devlist and break the coninfo command.
6964 Fix a compiler size warning.
6966 Signed-off-by: Jason Jin <jason.jin@freescale.com>
6967 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6968 Acked-by: Andy Fleming <afleming@freescale.com>
6970 commit b361acd64fd2525c081b9b288b0804efe209c0e9
6971 Author: ksi@koi8.net <ksi@koi8.net>
6972 Date: Tue Aug 14 10:02:16 2007 -0700
6974 TI DaVinci - fix unsupported %hhx format
6976 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
6978 commit f01dbb5424a81453c81190dd30e945891466f621
6979 Author: Wolfgang Denk <wd@denx.de>
6980 Date: Tue Aug 14 18:42:36 2007 +0200
6982 Coding style cleanup. Update CHANGELOG.
6984 Signed-off-by: Wolfgang Denk <wd@denx.de>
6986 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
6987 Author: Andy Fleming <afleming@freescale.com>
6988 Date: Tue Aug 14 10:32:59 2007 -0500
6990 Fix initrd/dtb interaction
6992 The original code would wrongly relocate the blob to be right before
6993 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
6994 if it is defined. So we make two changes:
6996 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
6998 2) If the blob is being relocated, relocate it before kbd, not initrd
7000 Signed-off-by: Andy Fleming <afleming@freescale.com>
7002 commit e54b970173769307a116bd34028b6d0c2eea2a4e
7003 Author: Peter Pearse <peter.pearse@arm.com>
7004 Date: Tue Aug 14 15:40:00 2007 +0100
7006 Supply spi interface in at45.c
7008 commit 4ce846ec59f36b85d6644a769690ad3feb667575
7009 Author: Stefan Roese <sr@denx.de>
7010 Date: Tue Aug 14 15:12:01 2007 +0200
7012 POST: Fix merge problem
7014 Signed-off-by: Stefan Roese <sr@denx.de>
7016 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
7017 Author: Stefan Roese <sr@denx.de>
7018 Date: Tue Aug 14 15:03:17 2007 +0200
7020 Coding style cleanup
7022 Signed-off-by: Stefan Roese <sr@denx.de>
7024 commit 779e975117a75e91fcebe226a63104dbfb924ab1
7025 Author: Stefan Roese <sr@denx.de>
7026 Date: Tue Aug 14 14:44:41 2007 +0200
7028 ppc4xx: Add initial Zeus (PPC405EP) board support
7030 Signed-off-by: Stefan Roese <sr@denx.de>
7032 commit c5a172a5fd636c12467429e3f7910e53773979c6
7033 Author: Stefan Roese <sr@denx.de>
7034 Date: Tue Aug 14 14:41:55 2007 +0200
7036 POST: Add option for external ethernet loopback test
7038 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
7039 is not done using an internal loopback connection, but by assuming
7040 that an external loopback connector is plugged into the board.
7042 Signed-off-by: Stefan Roese <sr@denx.de>
7044 commit eb2b4010ae426245172988804ee8d9193fb41038
7045 Author: Stefan Roese <sr@denx.de>
7046 Date: Tue Aug 14 14:39:44 2007 +0200
7048 POST: Add ppc405 support to cache and UART POST
7050 Signed-off-by: Stefan Roese <sr@denx.de>
7052 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
7053 Author: Peter Pearse <peter.pearse@arm.com>
7054 Date: Tue Aug 14 10:46:32 2007 +0100
7056 Replace lost end of at45.c.
7058 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
7059 Author: Peter Pearse <peter.pearse@arm.com>
7060 Date: Tue Aug 14 10:30:06 2007 +0100
7062 Update Makefiles for merged and split at45.c.
7064 commit 3454cece2db57cb9eb7087995f7e73066a163f71
7065 Author: Peter Pearse <peter.pearse@arm.com>
7066 Date: Tue Aug 14 10:21:06 2007 +0100
7068 Delete the merged files.
7070 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
7071 Author: Peter Pearse <peter.pearse@arm.com>
7072 Date: Tue Aug 14 10:14:05 2007 +0100
7076 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
7077 Author: Peter Pearse <peter.pearse@arm.com>
7078 Date: Tue Aug 14 10:10:52 2007 +0100
7080 Add MACH_TYPE records for several AT91 boards.
7081 Merge to two at45.c files into a common file, split to at45.c and spi.c
7082 Fix spelling error in DM9161 PHY Support.
7083 Initialize at91rm9200 board (and set LED).
7084 Add PIO control for at91rm9200dk LEDs and Mux.
7085 Change dataflash partition boundaries to be compatible with Linux 2.6.
7087 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
7088 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
7090 commit 4ef35e53c693556c54b0c22d6f873de87bade253
7091 Author: Wolfgang Denk <wd@denx.de>
7092 Date: Tue Aug 14 09:54:46 2007 +0200
7094 Coding style cleanup, update CHANGELOG
7096 Signed-off-by: Wolfgang Denk <wd@denx.de>
7098 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
7099 Author: Wolfgang Denk <wd@denx.de>
7100 Date: Tue Aug 14 09:47:27 2007 +0200
7102 Coding style cleanup; rebuild CHANGELOG
7104 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
7105 Author: Randy Vinson <rvinson@linuxbox.(none)>
7106 Date: Tue Feb 27 19:42:22 2007 -0700
7108 85xxCDS: Add make targets for legacy systems.
7110 The PCI ID select values on the Arcadia main board differ depending
7111 on the version of the hardware. The standard configuration supports
7112 Rev 3.1. The legacy target supports Rev 2.x.
7114 Signed-off-by Randy Vinson <rvinson@mvista.com>
7116 commit e41094c7e38177c755fbd9b182018069614f080d
7117 Author: Andy Fleming <afleming@freescale.com>
7118 Date: Tue Aug 14 01:50:09 2007 -0500
7120 85xxCDS: Enable the VIA PCI-to-ISA bridge.
7122 Author: Randy Vinson <rvinson@linuxbox.(none)>
7124 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
7127 Signed-off-by: Randy Vinson <rvinson@mvista.com>
7128 Signed-off-by: York Sun <yorksun@freescale.com>
7130 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
7131 Author: Andy Fleming <afleming@freescale.com>
7132 Date: Tue Aug 14 00:14:25 2007 -0500
7134 Add support for UEC to 8568
7136 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7137 Signed-off-by: Andy Fleming <afleming@freescale.com>
7139 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
7140 Author: Haiying Wang <Haiying.Wang@freescale.com>
7141 Date: Tue Jun 19 14:18:34 2007 -0400
7143 Add PCI support for MPC8568MDS board
7145 This patch is against u-boot-mpc85xx.git of www.denx.com
7147 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7148 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
7150 commit d111d6382c99fdea08c2312eeeae8786945e189a
7151 Author: Haiying Wang <Haiying.Wang@freescale.com>
7152 Date: Tue Jun 19 14:18:32 2007 -0400
7154 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
7156 This patch is against u-boot-mpc85xx.git of www.denx.com
7158 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
7159 both MPC8548CDS board and MPC8568MDS board, especially for supporting
7162 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
7163 DDR2 on all current board versions especially ver 1.92 or later to bring
7166 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7168 commit 3db0bef59eab1155801618cef5c481e97553b597
7169 Author: Kumar Gala <galak@kernel.crashing.org>
7170 Date: Tue Aug 7 18:07:27 2007 -0500
7172 Use an absolute address when jumping out of 4k boot page
7174 On e500 when we leave the 4k boot page we should use an absolute address since
7175 we don't know where the board code may want us to be really running at.
7177 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7179 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
7180 Author: Andy Fleming <afleming@freescale.com>
7181 Date: Mon Aug 13 14:49:59 2007 -0500
7183 MPC85xx BA bits not set for 3-bit bank address DIMM
7185 The current implementation does not set the number of bank address bits
7186 (BA) in the processor. The default assumes 2 logical bank bits. This
7187 works fine for a DIMM that uses devices with 4 internal banks (SPD
7188 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
7189 devices with 8 internal banks (SPD byte17 = 0x8).
7191 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
7193 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
7194 Author: Andy Fleming <afleming@freescale.com>
7195 Date: Mon Aug 13 14:38:06 2007 -0500
7197 Fix minor 85xx warnings
7199 Some patches had inserted warnings into the build:
7200 * mpc8560ads declared data without using it
7201 * cpu_init declared ecm and immap without using it in all CONFIGs
7202 * MPC8548CDS.h had its default filenames changed so that they contained
7203 "\m" in the paths. Made the defaults not Windows-specific (or
7206 Signed-off-by: Andy Fleming <afleming@freescale.com>
7208 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
7209 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7210 Date: Fri Jul 27 01:50:52 2007 -0500
7212 8548cds PCIE support.
7214 Make the early L1 cache stack region guarded to prevent speculative
7215 fetches outside the locked range.
7217 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
7218 init.S whitespace cleanup.
7220 Allow TEXT_BASE value to be specified on command line. This allows it
7221 to be set to 0xfffc0000 which cuts the uboot binary in half.
7223 Clear and enable lbc and ecm errors.
7225 Update last_busno in device-tree for pci and pcie.
7227 Remove load of obsolete cpu/mpc85xx/pci.0
7229 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7230 Acked-by: Andy Fleming <afleming@freescale.com>
7232 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
7233 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7234 Date: Fri Jul 27 01:50:51 2007 -0500
7238 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
7240 Enable LBC and ECM errors and clear error registers.
7242 Add tftpflash env var to get uboot from tftp server and flash it.
7244 Add pci/pcie convenience env vars to display register space:
7245 "run pcie3regs" to see all pcie3 ccsr registers
7246 "run pcie3cfg" to see all cfg registers
7247 Whitespace cleanup and MPC8544DS.h
7249 Enable CONFIG_INTERRUPTS.
7251 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7252 Acked-by: Andy Fleming <afleming@freescale.com>
7254 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
7255 Author: Andy Fleming <afleming@freescale.com>
7256 Date: Tue Aug 14 01:34:21 2007 -0500
7258 85xx start.S cleanup and exception support
7260 From: Ed Swarthout <Ed.Swarthout@freescale.com>
7262 Support external interrupts from platform to eliminate system hangs.
7263 Define CONFIG_INTERRUPTS board configure option to enable.
7264 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
7266 Remove extra cpu initialization redundant with hardware initialization.
7269 Define and use _START_OFFSET consistent with other processors using
7272 Move additional code from .text to boot page to make room for
7273 exception vectors at start of image.
7275 Handle Machine Check, External and Critical exceptions.
7277 Fix e500 machine check error determination in traps.c
7279 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
7281 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7282 Acked-by: Andy Fleming <afleming@freescale.com>
7284 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
7285 Author: Andy Fleming <afleming@freescale.com>
7286 Date: Tue Aug 14 01:33:18 2007 -0500
7288 Add MPC8544DS README
7290 Signed-off-by: Andy Fleming <afleming@freescale.com>
7292 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
7293 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7294 Date: Fri Jul 27 01:50:48 2007 -0500
7296 85xx allow debugger to configure ddr.
7298 Only check for mpc8548 rev 1 when compiled for 8548.
7300 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7301 Acked-by: Andy Fleming <afleming@freescale.com>
7303 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
7304 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7305 Date: Fri Jul 27 01:50:47 2007 -0500
7307 mpc85xx L2 cache reporting and SRAM relocation option.
7309 Allow debugger to override flash cs0/cs1 settings to enable alternate
7312 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7313 Acked-by: Andy Fleming <afleming@freescale.com>
7315 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
7316 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7317 Date: Fri Jul 27 01:50:46 2007 -0500
7319 e500 needs ppc_asm.tmp MCK_EXCEPTION
7321 Always define MCK_EXCEPTION macro - so e500 can use it too.
7323 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7324 Acked-by: Andy Fleming <afleming@freescale.com>
7326 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
7327 Author: David Updegraff <dave@cray.com>
7328 Date: Mon Jun 11 10:41:07 2007 -0500
7330 multicast tftp: RFC2090
7332 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
7333 on Realtek RTL8139 and Freescale TSEC.
7335 Signed-off-by: David Updegraff <dave@cray.com>
7336 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7338 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
7339 Author: Wilson Callan <wcallan@savantav.com>
7340 Date: Sat Jul 28 10:56:13 2007 -0400
7342 New CONFIG_BOOTP_SERVERIP option
7344 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
7345 from the bootp server
7347 Signed-off-by: Wilson Callan <wcallan@savantav.com>
7348 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7350 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
7351 Author: Mike Rapoport <mike@compulab.co.il>
7352 Date: Sun Aug 12 08:48:27 2007 +0300
7354 Add ability to take MAC address from the environment to DM9000 driver
7356 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
7357 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7359 commit be5d72d10d47609326226225181e301fb9a33b58
7360 Author: Wolfgang Denk <wd@denx.de>
7361 Date: Mon Aug 13 21:57:53 2007 +0200
7363 Minor coding style cleanup. Update CHANGELOG.
7365 Signed-off-by: Wolfgang Denk <wd@denx.de>
7367 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
7368 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7369 Date: Sat Aug 11 06:54:58 2007 -0500
7371 Modify SBC8641D to use new Freescale PCI routines
7373 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
7376 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7377 Signde-off-by: Jon Loeliger <jdl@freescale.com>
7379 commit a08458303e7f9db67f296980036d3292c35cb45c
7380 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7381 Date: Fri Jun 29 18:38:51 2007 +0200
7383 atmel_mci: Fix data timeout value
7385 Calculate the data timeout based on values from the CSD instead of
7386 just using a hardcoded DTOR value. This is a backport of a similar fix
7387 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
7390 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7392 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
7393 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7394 Date: Mon Aug 13 17:22:31 2007 +0200
7396 AVR32: Include <div64.h> instead of <asm/div64.h>
7398 include/asm-avr32/div64.h was recently moved to include/div64.h, but
7399 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
7400 the patch was merged perhaps?)
7402 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
7405 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7407 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
7408 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7409 Date: Wed Jun 27 13:34:26 2007 +0200
7411 atmel_mci: Use 512 byte blocksize if possible
7413 Instead of always using the largest blocksize the card supports, check
7414 if it can support smaller block sizes and use 512 bytes if possible.
7415 Most cards do support this, and other parts of u-boot seem to have
7416 trouble with block sizes different from 512 bytes.
7418 Also enable underrun/overrun protection.
7420 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7421 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
7423 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
7424 Author: Stefan Roese <sr@denx.de>
7425 Date: Mon Aug 13 09:05:33 2007 +0200
7427 ppc4xx: Fix problem in PLL clock calculation
7429 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
7430 and fixes a bug in the PLL clock calculation.
7432 Signed-off-by: Stefan Roese <sr@denx.de>
7434 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
7435 Author: Wolfgang Denk <wd@denx.de>
7436 Date: Sun Aug 12 21:34:50 2007 +0200
7440 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
7441 Author: Wolfgang Denk <wd@denx.de>
7442 Date: Sun Aug 12 21:34:34 2007 +0200
7444 Minor alignment of output, 2nd try.
7445 Also update CHANGELOG
7447 Signed-off-by: Wolfgang Denk <wd@denx.de>
7449 commit 6b309f22a724fad8418e811751a0741b893419cf
7450 Author: Wolfgang Denk <wd@denx.de>
7451 Date: Sun Aug 12 20:35:49 2007 +0200
7453 Minor alignment of output
7455 Signed-off-by: Wolfgang Denk <wd@denx.de>
7457 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
7458 Author: Wolfgang Denk <wd@denx.de>
7459 Date: Sun Aug 12 18:28:18 2007 +0200
7461 Cleanup output on ADS5121 board
7463 Signed-off-by: Wolfgang Denk
7465 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
7466 Author: Wolfgang Denk <wd@denx.de>
7467 Date: Sun Aug 12 15:11:38 2007 +0200
7469 Adapt board configuration and fix kernel crash on MCC200 board.
7471 The update procedure was modified to turn off the USB subsystem
7472 before exit for MCC200 and TRAB. This is necessary as otherwise the
7473 USB controller continues to write periodically to system memory!
7475 MCC200-specific notes:
7476 - the patch disables the magic key check for MCC200
7477 - the patch contains the configuration changes made
7478 for the new revision of the board.
7480 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7481 Signed-off-by: Wolfgang Denk <wd@denx.de>
7483 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
7484 Author: Wolfgang Denk <wd@denx.de>
7485 Date: Sun Aug 12 14:47:54 2007 +0200
7487 Adjust default configuration of ADS5121 board.
7489 Signed-off-by: Wolfgang Denk <wd@denx.de>
7491 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
7492 Author: Wolfgang Denk <wd@denx.de>
7493 Date: Sun Aug 12 14:27:39 2007 +0200
7495 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
7497 Signed-off-by: Wolfgang Denk <wd@denx.de>
7499 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
7500 Author: Gerald Van Baren <vanbaren@cideas.com>
7501 Date: Tue Aug 7 21:14:22 2007 -0400
7503 Improve error print messages.
7505 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7507 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
7508 Author: Kim Phillips <kim.phillips@freescale.com>
7509 Date: Tue Jul 17 13:57:04 2007 -0500
7511 fdt: allow for builds that don't want env and bd_t nodes
7513 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
7516 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7518 commit 91148bf7aeba142d6f348805db7625db7da64d6f
7519 Author: Kim Phillips <kim.phillips@freescale.com>
7520 Date: Tue Jul 17 13:56:53 2007 -0500
7522 fdt: do board setup based on fdt address specified on bootm line
7524 The last fdt patch to bootm did board setup based on the address
7525 specified by a prior fdt address command invocation. The bootm
7526 code, as its call to fdt_chosen does, should use the fdt specified
7527 by the user on the bootm command. Note this restores full
7528 functionality for the 8360's existing default boot environment
7529 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
7530 before booting a kernel).
7532 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7534 commit e125a2ffc209dd34794e326c7175658253beadf3
7535 Author: Gerald Van Baren <vanbaren@cideas.com>
7536 Date: Tue Jul 10 20:40:39 2007 -0400
7538 Call ft_board_setup() from the bootm command.
7540 In the patch titled "Create new fdt boardsetup command..." I removed the
7541 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
7542 to add a direct call back into cmd_bootm.c
7544 This fixes the oversight by adding the direct call to the bootm command.
7546 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7548 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
7549 Author: Gerald Van Baren <vanbaren@cideas.com>
7550 Date: Mon Jun 25 23:25:28 2007 -0400
7552 Create new fdt boardsetup command, fix bug parsing [] form of set values.
7554 Previously ft_board_setup() was called by fdt_chosen() which was not
7555 really correctly structured. This splits ft_board_setup() out by creating
7556 a new fdt boardsetup command.
7558 Fix a bug when parsing fdt set command values which have the square
7559 bracket form [00 11 22 33] - the length was updated incorrectly in when
7562 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7564 commit 6f35ded9e85493595e0eb66a82b502a95326d049
7565 Author: Gerald Van Baren <vanbaren@cideas.com>
7566 Date: Mon Jun 25 20:55:58 2007 -0400
7568 Tighten up the error messages.
7570 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7572 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
7573 Author: Gerald Van Baren <vanbaren@cideas.com>
7574 Date: Mon Jun 25 19:52:23 2007 -0400
7576 Asthetic improvements: error messages and line lengths.
7578 Tighten up the error messages, split overlength lines.
7580 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7582 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
7583 Author: Gerald Van Baren <vanbaren@cideas.com>
7584 Date: Fri May 25 22:08:57 2007 -0400
7586 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
7588 The fdt_chosen() function was adding/seting some properties ad-hoc
7589 improperly and duplicated (poorly) what was done in ft_board_setup()
7591 Clean up long lines (setting properties, printing errors).
7593 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7595 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
7596 Author: Gerald Van Baren <vanbaren@cideas.com>
7597 Date: Mon May 21 23:27:16 2007 -0400
7599 For fdt_find_node_by_path(), handle the root path properly.
7601 Also removes the special case root path detection in cmd_fdt.c since it
7602 is no longer necessary.
7604 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7606 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
7607 Author: Gerald Van Baren <vanbaren@cideas.com>
7608 Date: Thu May 17 23:54:36 2007 -0400
7610 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
7612 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
7613 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7615 commit 1a861169bc3758f9de3aead62b058736c6891246
7616 Author: Gerald Van Baren <vanbaren@cideas.com>
7617 Date: Wed Jun 6 22:47:58 2007 -0400
7619 Replace fdt_node_offset() with fdt_find_node_by_path().
7621 The new name matches more closely the kernel's name, which is also
7622 a much better description.
7624 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
7625 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7627 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
7628 Author: Gerald Van Baren <vanbaren@cideas.com>
7629 Date: Wed May 16 22:39:59 2007 -0400
7631 Fix cmd_fdt line lengths, refactor code.
7633 Break lines that were greater than 80 characters in length.
7634 Move the fdt print and property parsing code to separate static functions
7635 to reduce coding clutter in the fdt_cmd handling body.
7637 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7639 commit 25114033ab21788810c48ba4df103b649da1223b
7640 Author: Gerald Van Baren <vanbaren@cideas.com>
7641 Date: Sat May 12 09:47:25 2007 -0400
7643 FDT command improvements.
7645 Fix "fdt set" so that it will create a non-existing property.
7646 Add "fdt mknode" to create nodes.
7648 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7650 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
7651 Author: Gerald Van Baren <vanbaren@cideas.com>
7652 Date: Sat May 12 09:45:46 2007 -0400
7654 Reorganize and fix problems (returns) in the bootm command.
7656 Do *NOT* return after the "point of no return" has been passed.
7657 If something goes wrong, the board must be reset after that point.
7658 Move the "Transferring control to Linux" debug message back to where it
7659 belongs: just before transferring control to linux.
7661 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7663 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
7664 Author: Gerald Van Baren <vanbaren@cideas.com>
7665 Date: Tue May 8 21:27:35 2007 -0400
7667 Fix bugs in the CONFIG_OF_LIBFDT
7669 Stupid coding mistakes (identified by Timur Tabi, thanks).
7671 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7673 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
7674 Author: Gerald Van Baren <vanbaren@cideas.com>
7675 Date: Wed Apr 25 22:47:15 2007 -0400
7677 Improve fdt move length handling.
7679 Make the length parameter optional: if not specified, do the move using
7680 the current size unchanged.
7682 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7684 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
7685 Author: Gerald Van Baren <vanbaren@cideas.com>
7686 Date: Wed Apr 25 22:23:36 2007 -0400
7688 Minor code clean up.
7690 Declare the variable fdt properly as extern.
7691 Call the "set_fn" function pointer the "short way" without the full
7692 dereferencing syntax.
7694 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7696 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
7697 Author: Gerald Van Baren <vanbaren@cideas.com>
7698 Date: Wed Apr 25 21:24:27 2007 -0400
7700 Improve error messages, more informative.
7702 Print more than the raw libfdt error message strings. This is especially
7703 useful for cluing in the user when the bootm command aborts due to
7706 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7708 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
7709 Author: Gerald Van Baren <vanbaren@cideas.com>
7710 Date: Fri Apr 20 22:46:53 2007 -0400
7712 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
7714 This is the way u-boot reduces configured-out code. At Wolfgang
7715 Grandegger and Wolfgang Denk's request, make libfdt conform.
7717 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7719 commit 923efd286411ed052d9e074f59f8986d6081061c
7720 Author: Bruce Adler <bruce.adler@ccpu.com>
7721 Date: Fri Aug 10 14:54:47 2007 -0700
7723 add image size and descriptors for Spartan 3E FPGA chips
7725 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
7727 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
7729 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
7730 Author: Kim Phillips <kim.phillips@freescale.com>
7731 Date: Fri Aug 10 15:34:48 2007 -0500
7733 make MAKEALL more immune to merge conflicts
7735 ..by placing board entries one per line, as suggested by jdl.
7737 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7739 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
7740 Author: Kim Phillips <kim.phillips@freescale.com>
7741 Date: Fri Aug 10 13:28:25 2007 -0500
7743 README: Remove outdated cpu type, board type, and NAME_config lists
7745 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7747 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
7748 Author: Dave Liu <r63238@freescale.com>
7749 Date: Fri Aug 10 15:48:59 2007 +0800
7751 mpc83xx: Suppress the warning 'burstlen'
7753 suppress the warning 'burstlen' of spd_sdram.
7755 Signed-off-by: Dave Liu <daveliu@freescale.com>
7757 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
7758 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7759 Date: Thu Aug 9 15:11:03 2007 -0500
7761 Add support for SBC8641D. Config files.
7763 Add support for Wind River's SBC8641D reference board.
7765 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7766 Acked-by: Wolfgang Denk <wd@denx.de>
7767 Acked-by: Jon Loeliger <jdl@freescale.com>
7769 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
7770 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7771 Date: Thu Aug 9 15:10:53 2007 -0500
7773 Add support for SBC8641D. Board files.
7775 Add support for Wind River's SBC8641D reference board.
7777 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7778 Acked-by: Wolfgang Denk <wd@denx.de>
7779 Acked-by: Jon Loeliger <jdl@freescale.com>
7781 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
7782 Author: Stefan Roese <sr@denx.de>
7783 Date: Fri Aug 10 20:34:58 2007 +0200
7785 Conding style cleanup
7787 Signed-off-by: Stefan Roese <sr@denx.de>
7789 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
7790 Author: Sergey Kubushyn <ksi@koi8.net>
7791 Date: Fri Aug 10 20:26:18 2007 +0200
7793 [ARM] TI DaVinci support, hopefully final
7795 Add support for the following DaVinci boards:
7802 - Split into separate board directories
7803 - Removed changes to MTD_DEBUG (or whatever it's called)
7804 - New CONFIG_CMD party line followed
7805 - Some cosmetic fixes, cleanup etc.
7806 - Patches against the latest U-Boot tree as of now.
7807 - Fixed CONFIG_CMD_NET in net files.
7808 - Fixed CONFIG_CMD_EEPROM for schmoogie.
7809 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
7810 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
7811 but it at least compiles.
7813 Here is an excerpt from session log on SCHMOOGIE...
7815 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
7824 ETH PHY : DP83848 @ 0x01
7826 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
7827 U-Boot > ping 192.168.253.10
7828 host 192.168.253.10 is alive
7831 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
7832 Acked-by: Dirk Behme <dirk.behme@gmail.com>
7833 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
7834 Acked-by: Stefan Roese <sr@denx.de>
7836 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
7837 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7838 Date: Fri Jul 27 01:50:45 2007 -0500
7840 fsl_pci_init cleanup.
7842 Do not enable normal errors created during probe (master abort, perr,
7843 and pcie Invalid Configuration access).
7845 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
7847 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7848 Acked-by: Andy Fleming <afleming@freescale.com>
7850 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
7851 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7852 Date: Fri Jul 27 01:50:44 2007 -0500
7854 pciauto_setup_device bars_num fix
7856 Passing bars_num=0 to pciauto_setup_device should assign no bars.
7858 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7859 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7860 Acked-by: Andy Fleming <afleming@freescale.com>
7862 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
7863 Author: Jon Loeliger <jdl@freescale.com>
7864 Date: Mon Aug 6 17:39:44 2007 -0500
7866 8641hpcn: Do correct sized pointer math.
7868 When I rebased Ed's patch and cleaned up a few compilation
7869 problems, I apparently rebased my brain on crack first.
7870 Fix that by doing (char *) sized pointer math as needed.
7872 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7874 commit cfc7a7f5bb3273c9951173c788001d45118f141f
7875 Author: Jon Loeliger <jdl@freescale.com>
7876 Date: Thu Aug 2 14:42:20 2007 -0500
7881 Always set PICGCR_MODE.
7882 Enable machine check and provide board config option
7883 to set and handle SoC error interrupts.
7885 Include MSSSR0 in error message.
7887 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
7889 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7890 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7892 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
7893 Author: Stefan Roese <sr@denx.de>
7894 Date: Fri Aug 10 10:42:25 2007 +0200
7896 Coding style cleanup
7898 Signed-off-by: Stefan Roese <sr@denx.de>
7900 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
7901 Author: Dirk Behme <dirk.behme@googlemail.com>
7902 Date: Thu Aug 2 17:42:08 2007 +0200
7904 Make use of generic 64bit division in nand_util.c
7906 Use generic 64bit division in nand_util.c. This makes nand_util.c
7907 independent of any toolchain 64bit division.
7909 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
7911 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
7912 Author: Dirk Behme <dirk.behme@googlemail.com>
7913 Date: Thu Aug 2 17:41:14 2007 +0200
7915 Move 64bit division from avr32 to generic lib
7917 Move the 64bit division from lib_avr32 to lib_generic. With this, all
7918 boards can do_div/__div64_32 if needed, not only avr one. Code is put
7919 to lib_generic, so no larger memory footprint if not used. No code
7920 modifications. Thanks for proposal by Håvard Skinnemoen.
7922 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
7924 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
7925 Author: Niklaus Giger <niklausgiger@gmx.ch>
7926 Date: Fri Jul 27 11:31:22 2007 +0200
7928 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
7930 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7932 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
7933 Author: Niklaus Giger <niklausgiger@gmx.ch>
7934 Date: Fri Jul 27 11:30:33 2007 +0200
7936 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
7938 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7940 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
7941 Author: Niklaus Giger <niklausgiger@gmx.ch>
7942 Date: Fri Jul 27 11:38:26 2007 +0200
7944 Add PPC4xx-HCU4 and HCU5 boards: common files
7946 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7948 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
7949 Author: Niklaus Giger <niklausgiger@gmx.ch>
7950 Date: Fri Jul 27 11:28:44 2007 +0200
7952 Add PPC4xx-HCU4 and HCU5 boards: make related
7954 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7956 commit 137fdd9f474ecb853efdace5200576308c67f18d
7957 Author: Niklaus Giger <niklausgiger@gmx.ch>
7958 Date: Fri Jul 27 11:28:03 2007 +0200
7960 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
7962 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7964 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
7965 Author: Niklaus Giger <niklausgiger@gmx.ch>
7966 Date: Fri Jul 27 11:27:15 2007 +0200
7968 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
7970 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7972 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
7973 Author: Niklaus Giger <niklausgiger@gmx.ch>
7974 Date: Fri Jul 27 11:25:31 2007 +0200
7976 Add PPC4xx-HCU4 and HCU5 boards: READMEs
7978 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7980 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
7981 Author: Niklaus Giger <niklausgiger@gmx.ch>
7982 Date: Fri Jul 27 11:37:40 2007 +0200
7984 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
7986 This series of patches adds support for 2 boards from Netstal Maschinen.
7988 The HCU4 has a PPC405Gpr and
7989 the HCU5 has a PPC440EPX.
7991 The HCU4 has a somehow complicated flash setup, as the booteprom is
7992 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
7995 The HCU5 has only a booteprom as the whole code will be downloaded from a
7996 different board which has HD, CD-ROM, etc and where all code is stored.
7998 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
8001 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8003 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
8004 Author: Stefan Roese <sr@denx.de>
8005 Date: Fri Aug 10 08:42:55 2007 +0200
8007 ppc4xx: Update lwmon5 POST configuration
8009 Signed-off-by: Stefan Roese <sr@denx.de>
8011 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
8012 Author: Yuri Tikhonov <yur@emcraft.com>
8013 Date: Fri Aug 10 08:25:22 2007 +0200
8015 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
8017 The patch adds support for UART POST on ppc44x-based boards with no
8018 external serial clocks installed.
8020 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
8021 Acked-by: Stefan Roese <sr@denx.de>
8023 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
8024 Author: Kim Phillips <kim.phillips@freescale.com>
8025 Date: Mon Aug 6 18:18:34 2007 -0500
8027 mpc83xx: fix ITX[GP] O=builddir builds
8029 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
8031 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
8032 "BUILD_DIR=<some dir> ./MAKEALL ..."
8034 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8036 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
8037 Author: Dave Liu <r63238@freescale.com>
8038 Date: Wed Aug 1 15:00:59 2007 +0800
8040 mpc83xx: Correct the README for DDR ECC
8042 Update the README for DDR ECC, change the name
8043 to README.mpc83xx.ddrecc.
8045 Signed-off-by: Dave Liu <daveliu@freescale.com>
8046 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8048 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
8049 Author: Dave Liu <r63238@freescale.com>
8050 Date: Wed Aug 1 15:00:15 2007 +0800
8052 mpc83xx: Consolidate the ECC support of 83xx
8054 Remove the duplicated source code of ecc command on the <board>.c,
8055 for reused, move these code to cpu/mpc83xx directory.
8057 Signed-off-by: Dave Liu <daveliu@freescale.com>
8058 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8060 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
8061 Author: Dave Liu <r63238@freescale.com>
8062 Date: Sat Aug 4 13:37:39 2007 +0800
8064 mpc83xx: Correct the burst length for DDR2 with 32 bits
8066 The burst length should be 4 for DDR2 with 32 bits bus
8068 Signed-off-by: Dave Liu <daveliu@freescale.com>
8070 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
8071 Author: Kim Phillips <kim.phillips@freescale.com>
8072 Date: Wed Jul 25 19:25:33 2007 -0500
8074 mpc83xx: add support for the MPC8323E RDB
8076 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
8077 five 10/100 ethernet ports connected via an ICPlus IP175C
8078 switch, one PCI slot, and serial. Features not supported
8079 in this patch are SD card interface, 2 USB ports, and the
8082 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
8083 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8085 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
8086 Author: Kim Phillips <kim.phillips@freescale.com>
8087 Date: Wed Jul 25 19:25:28 2007 -0500
8089 mpc83xx: fixup generic pci for libfdt
8091 add libfdt support to the generic 83xx pci code
8093 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8095 commit f57ac7a7b37109245b69db80839ebee26179966a
8096 Author: Kim Phillips <kim.phillips@freescale.com>
8097 Date: Wed Jul 25 19:25:22 2007 -0500
8099 mpc83xx: fix 8360 and cpu functions to update fdt being passed
8101 ..and not the global fdt. Rename local fdt vars to blob so as not to
8102 be confused with the global var with the same three-letter name.
8104 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8106 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
8107 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8108 Date: Wed Jul 4 21:34:24 2007 -0400
8110 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
8112 Several node strings were not correct (trailing slashes and properties
8114 Added setting of the timebase-frequency.
8115 Improved error messages and use debug() instead of printf().
8117 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
8118 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8120 commit 26d02c9bbac1751c5e19294f000100b48d43a920
8121 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8122 Date: Wed Jul 4 21:27:30 2007 -0400
8124 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
8126 The new name matches more closely the kernel's name, which is also
8127 a much better description.
8129 These are the mpc83xx changes made necessary by the function name change.
8131 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
8132 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
8133 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8135 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
8136 Author: Dave Liu <daveliu@freescale.com>
8137 Date: Mon Jun 25 10:41:56 2007 +0800
8139 mpc83xx: Add support for the display of reset status
8141 83xx processor family has many reset sources, such as
8142 power on reset, software hard reset, software soft reset,
8143 JTAG, bus monitor, software watchdog, check stop reset,
8144 external hard reset, external software reset.
8145 sometimes, to figure out the fault of system, we need to
8146 know the cause of reset early before the prompt of
8149 Signed-off-by: Dave Liu <daveliu@freescale.com>
8150 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8152 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
8153 Author: Dave Liu <daveliu@freescale.com>
8154 Date: Mon Jun 25 10:41:04 2007 +0800
8156 mpc83xx: Fix the align bug of SDMA buffer
8158 According to the latest user manual, the SDMA temporary
8159 buffer base address must be 4KB aligned.
8161 Signed-off-by: Dave Liu <daveliu@freescale.com>
8162 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8164 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
8165 Author: Dave Liu <daveliu@freescale.com>
8166 Date: Mon Jun 25 13:21:12 2007 +0800
8168 mpc83xx: Revise the MPC8360EMDS readme doc
8170 When the rev2.x silicon mount on the MPC8360EMDS baord,
8171 and if you are using the u-boot version after the commit
8172 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
8173 to make the ethernet interface usable, we have to setup
8174 the jumpers correctly.
8176 Signed-off-by: Dave Liu <daveliu@freescale.com>
8177 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8179 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
8180 Author: Timur Tabi <timur@freescale.com>
8181 Date: Tue Jul 3 13:46:32 2007 -0500
8183 FSL I2C driver programs the two I2C busses differently
8185 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
8186 The second I2C bus has its slave address programmed incorrectly and is
8187 missing a 5-us delay.
8189 Signed-off-by: Timur Tabi <timur@freescale.com>
8190 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8192 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
8193 Author: Timur Tabi <timur@freescale.com>
8194 Date: Tue Jul 3 13:04:34 2007 -0500
8196 Update SCCR programming in cpu_init_f() to support all 83xx processors
8198 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
8199 bitfields for all 83xx processors. The code to update some bitfields was
8200 compiled only on some processors. Now, the bitfields are programmed as long
8201 as the corresponding CFG_SCCR option is defined in the board header file.
8202 This means that the board header file should not define any CFG_SCCR macros
8203 for bitfields that don't exist on that processor, otherwise the SCCR will be
8204 programmed incorrectly.
8206 Signed-off-by: Timur Tabi <timur@freescale.com>
8207 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8209 commit 9546266999f0b9b51372636614211b88d90f0f25
8210 Author: Martin Krause <martin.krause@tqs.de>
8211 Date: Fri Jun 22 13:04:22 2007 +0200
8213 TQM834x: cleanup configuraton
8215 Remove irritating #undef DEBUG
8217 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8218 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8220 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
8221 Author: david.saada <David.Saada@ecitele.com>
8222 Date: Mon Jun 18 09:09:53 2007 -0700
8224 MPC83xx: Fix makefile to generate config.h file in the build directory
8226 MPC83xx: Fix the Makefile config sections to generate the include/config.h
8227 file in the build directory instead of the source directory.
8229 Signed-off-by: David Saada <david.saada@ecitele.com>
8230 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8232 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
8233 Author: Lee Nipper <Lee.Nipper@freescale.com>
8234 Date: Thu Jun 14 20:07:33 2007 -0500
8236 mpc83xx: Add support for 8360 silicon revision 2.1
8238 This change adds 8360 silicon revision 2.1 support to u-boot.
8240 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
8241 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8243 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
8244 Author: Kumar Gala <galak@kernel.crashing.org>
8245 Date: Wed Aug 8 04:14:28 2007 -0500
8247 Treat ppc64 host as ppc
8249 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8251 commit 0dc4279b08ff82472bec2e2c90858602459febe8
8252 Author: Jason Jin <Jason.jin@freescale.com>
8253 Date: Wed Aug 8 09:01:46 2007 +0800
8255 Minor fix for bios emulator makefile
8257 Add $(obj) to LIB avoiding objects be built in the source dir
8259 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8261 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
8262 Author: Jason Jin <Jason.jin@freescale.com>
8263 Date: Wed Aug 8 08:33:11 2007 +0800
8265 Add CONFIG_BIOSEMU define to guard all the bios emulator code
8267 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8269 This patch fix the compile issue on the board that did not enable the bios emulator
8271 commit ed8106433522f2ea8933e9808346860d061d7731
8272 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
8273 Date: Tue Jul 31 12:27:25 2007 -0500
8275 tsec: fix multiple PHY support
8277 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
8278 broke multiple PHY support in tsec.c. This fixes it.
8280 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
8281 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8283 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
8284 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
8285 Date: Thu Aug 9 09:08:18 2007 -0500
8287 tsec: Allow Ten Bit Interface address to be configurable
8289 Allow the address of the Ten Bit Interface (TBI) to be changed in the
8290 event of a conflict with another device.
8292 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
8294 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
8295 Author: Stefan Roese <sr@denx.de>
8296 Date: Wed Aug 8 09:54:26 2007 +0200
8298 Coding style cleanup
8300 Signed-off-by: Stefan Roese <sr@denx.de>
8302 commit a41de1f0d373e09c782dea558385a06247111ba5
8303 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8304 Date: Sun Aug 5 05:15:18 2007 -0500
8306 Port enabled for I2C signals and chipselects port configuration.
8308 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8310 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
8311 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8312 Date: Sun Aug 5 04:31:18 2007 -0500
8316 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8318 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
8319 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8320 Date: Sun Aug 5 04:11:20 2007 -0500
8324 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8326 commit 99c03c175d2689093176facf17c58ce2cb320001
8327 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8328 Date: Sun Aug 5 03:58:52 2007 -0500
8330 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
8332 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8334 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
8335 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8336 Date: Sun Aug 5 03:55:21 2007 -0500
8338 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
8340 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8342 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
8343 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8344 Date: Sun Aug 5 03:43:30 2007 -0500
8346 Moved sync() from board file to include/asm-m68k/io.h
8348 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8350 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
8351 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8352 Date: Sun Aug 5 03:30:44 2007 -0500
8354 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
8356 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8358 commit 9998bd37ead85e93953559720710d3b0685c81e6
8359 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8360 Date: Sun Aug 5 03:19:10 2007 -0500
8362 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
8364 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8366 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
8367 Author: Jason Jin <Jason.jin@freescale.com>
8368 Date: Tue Aug 7 16:17:06 2007 +0800
8370 Add CONFIG_BIOSEMU define to guard all the bios emulator code
8372 This patch fix the compile issue on the board that did not enable the bios emulator
8374 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
8375 Author: Wolfgang Denk <wd@denx.de>
8376 Date: Tue Aug 7 16:02:13 2007 +0200
8378 Fix missing brace error in fs/fat/fat.c
8379 [pointed out by Roderik Wildenburg]
8381 Signed-off-by: Wolfgang Denk <wd@denx.de>
8383 commit 706714d97a0d08d59eda4de2268c39f504688329
8384 Author: Michal Simek <monstr@monstr.eu>
8385 Date: Mon Aug 6 23:41:53 2007 +0200
8387 [FIX] remove cute code
8389 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
8390 Author: Michal Simek <monstr@monstr.eu>
8391 Date: Mon Aug 6 23:35:26 2007 +0200
8393 [FIX] Fix romfs code
8395 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
8396 Author: Michal Simek <monstr@monstr.eu>
8397 Date: Mon Aug 6 23:31:49 2007 +0200
8399 [FIX] Coding style cleanup - Wolfgang's suggestions
8401 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
8402 Author: Wolfgang Denk <wd@denx.de>
8403 Date: Mon Aug 6 23:21:05 2007 +0200
8405 Fixed typo in README (pointed out by Martin Jost).
8407 Signed-off-by: Wolfgang Denk <wd@denx.de>
8409 commit 537223afa61f64480df31ce440a9cb386df4a814
8410 Author: Stefan Roese <sr@denx.de>
8411 Date: Mon Aug 6 21:10:17 2007 +0200
8413 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
8415 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
8416 here an updated Bamboo README.
8418 Signed-off-by: Stefan Roese <sr@denx.de>
8420 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
8421 Author: Wolfgang Denk <wd@denx.de>
8422 Date: Mon Aug 6 02:17:36 2007 +0200
8424 Coding style cleanup. Update CHANGELOG.
8426 Signed-off-by: Wolfgang Denk <wd@denx.de>
8428 commit 221838cc7eb178370ff62aa05920a582e12ac322
8429 Author: Jason Jin <Jason.jin@freescale.com>
8430 Date: Tue Jul 10 09:03:22 2007 +0800
8432 Remove the bios emulator from MAI board.
8434 The bios emulator in the MAI board can not pass compile
8435 and have a lot of crap in it. remove it and will have a
8436 clean and small bios emulator in the drivers directory
8437 which can be uesed for every board.
8439 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8441 commit 5618332409bb96f4448d1712899369fc80c0b489
8442 Author: Jason Jin <Jason.jin@freescale.com>
8443 Date: Fri Jul 13 12:14:59 2007 +0800
8445 Fix some compile issues for MAI board.
8447 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8449 commit 0f460a1ee148b648ee242c3157650287d4296260
8450 Author: Jason Jin <Jason.jin@freescale.com>
8451 Date: Fri Jul 13 12:14:58 2007 +0800
8453 Configurations for ATI video card BIOS emulator
8455 This patch add definition of the BIOS emulator and the ATI framebuffer
8456 driver for MPC8641HPCN board.
8458 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8459 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8461 commit ece92f85053b8df613edcf05b26a416cbc3d629c
8462 Author: Jason Jin <Jason.jin@freescale.com>
8463 Date: Fri Jul 6 08:34:56 2007 +0800
8465 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
8466 ATI video card BIOS. and can be used for x86 code emulation by some
8469 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8471 commit 5072188acabde3178fac7f5a597150e6e74fd40c
8472 Author: Jason Jin <Jason.jin@freescale.com>
8473 Date: Fri Jul 6 08:33:33 2007 +0800
8475 This is a framebuffer driver for ATI video card, can work for PCI9200,
8476 X300, X700, X800 ATI video cards.
8478 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8479 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8481 commit 5728be389e65fd47f34b33c2596271eb4db751ae
8482 Author: Wolfgang Denk <wd@denx.de>
8483 Date: Mon Aug 6 01:01:49 2007 +0200
8485 Coding style cleanup. Update CHANGELOG.
8487 Signed-off-by: Wolfgang Denk <wd@denx.de>
8489 commit 8092fef4c29b395958bb649647da7e3775731517
8490 Author: Martin Krause <Martin.Krause@tqs.de>
8491 Date: Tue Dec 12 14:26:01 2006 +0100
8493 Add functions to list of exported functions
8495 Additionally export the following fuctions (to make trab_config build again):
8499 Also bump the ABI version to reflect this change
8501 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8503 commit 63cec5814fab5d2b1c86982327433807a5ac0249
8504 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8505 Date: Thu Aug 2 14:09:49 2007 -0500
8507 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
8509 All of the PCI/PCI-Express driver and initialization code that
8510 was in the MPC8641HPCN port has now been moved into the common
8511 drivers/fsl_pci_init.c. In a subsequent patch, this will be
8512 utilized by the 85xx ports as well.
8514 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
8516 Also enable the second PCI-Express controller on 8641
8517 by getting its BATS and CFG_ setup right.
8519 Fixed a u16 vendor compiler warning in AHCI driver too.
8521 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8522 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8523 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8525 commit a274ca4f6d68830e7c916f897561cff8c4101c38
8526 Author: Michal Simek <monstr@monstr.eu>
8527 Date: Sun Aug 5 22:33:05 2007 +0200
8529 [FIX] Coding style cleanup
8531 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
8532 Author: Michal Simek <monstr@monstr.eu>
8533 Date: Sun Aug 5 16:13:31 2007 +0200
8535 [FIX] Xilinx Uartlite driver
8536 Because PPC405 can use UARTLITE serial interface and
8537 Microblaze can use Uart16550 serial interface not only Uartlite.
8539 commit 98889edd50aadf862071eb5664747ad0d568a20e
8540 Author: Michal Simek <monstr@monstr.eu>
8541 Date: Sun Aug 5 15:54:53 2007 +0200
8543 [FIX] Change configuration for XUPV2P Microblaze board
8545 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
8546 Author: Michal Simek <monstr@monstr.eu>
8547 Date: Sun Aug 5 15:53:50 2007 +0200
8549 [PATCH] Added support for Xilinx Emac community driver
8551 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
8552 Author: Bartlomiej Sieka <tur@semihalf.com>
8553 Date: Fri Aug 3 12:08:16 2007 +0200
8555 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
8557 Add the ability for modules from the Schindler cm5200 family to use a
8558 single U-Boot image:
8559 - rename cm1_qp1 to cm5200
8560 - add run-time module detection
8561 - parametrize SDRAM configuration according to the module we are running on
8563 Few minor, board-specific fixes included in this patch:
8564 - better MAC address handling
8565 - updated default environment ('update' command uses +{filesize} now)
8566 - improved error messages in the auto-update code
8567 - allow booting U-Boot from RAM (CFG_RAMBOOT)
8569 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8570 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
8571 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8573 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
8574 Author: Andy Fleming <afleming@freescale.com>
8575 Date: Fri Aug 3 04:05:25 2007 -0500
8577 Add Marvell 1149 PHY support to the TSEC
8579 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
8580 Author: Wolfgang Denk <wd@denx.de>
8581 Date: Thu Aug 2 21:27:46 2007 +0200
8583 Coding style cleanup, update CHANGELOG
8585 Signed-off-by: Wolfgang Denk <wd@denx.de>
8587 commit 63e22764d2f8653f68888c667eb65b3996b52680
8588 Author: Wolfgang Denk <wd@denx.de>
8589 Date: Thu Aug 2 10:11:18 2007 +0200
8591 Minor cleanup of <board>_nand build rules.
8593 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
8594 Author: Stefan Roese <sr@denx.de>
8595 Date: Thu Aug 2 08:33:56 2007 +0200
8597 ppc4xx: Code cleanup
8599 Signed-off-by: Stefan Roese <sr@denx.de>
8601 commit c92409812206ac67a7fa7aae298539a9c3804a46
8602 Author: Grzegorz Bernacki <gjb@semihalf.com>
8603 Date: Tue Jul 31 18:51:48 2007 +0200
8605 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
8607 During config transactions on the PCIe bus an attempt to scan for a
8608 non-existent device can lead to a machine check exception with certain
8609 peripheral devices. In order to avoid crashing in such scenarios the
8610 instrumented versions of the config cycle read routines are introduced, so
8611 the exceptions fixups framework can gracefully recover.
8613 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8614 Acked-by: Rafal Jaworowski <raj@semihalf.com>
8616 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
8617 Author: Rafal Jaworowski <raj@semihalf.com>
8618 Date: Tue Jul 31 18:19:54 2007 +0200
8620 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
8622 This brings back separate settings for PCIe bus numbers depending on chip
8623 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
8624 commit. 440SPe rev. A does NOT work properly with the same settings as for
8625 the rev. B (no devices are seen on the bus during enumeration).
8627 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8629 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
8630 Author: Wolfgang Denk <wd@denx.de>
8631 Date: Thu Aug 2 00:48:45 2007 +0200
8633 Fix build errors and warnings / code cleanup.
8635 Signed-off-by: Wolfgang Denk <wd@denx.de>
8637 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
8638 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
8639 Date: Tue Jul 31 10:24:56 2007 +0200
8641 ppc4xx: Update AMCC Bamboo 440EP support
8643 Changed storage type of cfg_simulate_spd_eeprom to const
8644 Changed storage type of gpio_tab to stack storage
8645 (Cannot access global data declarations in .bss until afer code relocation)
8647 Improved SDRAM tests to catch problems where data is not uniquely addressable
8648 (e.g. incorrectly programmed SDRAM row or columns)
8650 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
8651 Fixed AM29LV320DT (OpCode Flash) sector map
8653 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
8654 Signed-off-by: Stefan Roese <sr@denx.de>
8656 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
8657 Author: Stefan Roese <sr@denx.de>
8658 Date: Tue Jul 31 08:37:01 2007 +0200
8660 ppc4xx: Update 440EPx lwmon5 board support
8662 - Clear ECC status regs after ECC POST test
8663 - Set dcbz for ECC generation with caches enabled as default
8666 Signed-off-by: Stefan Roese <sr@denx.de>
8668 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
8669 Author: Stefan Roese <sr@denx.de>
8670 Date: Mon Jul 30 11:04:57 2007 +0200
8672 ppc4xx: Only print ECC related info when the error bis are set
8674 Signed-off-by: Stefan Roese <sr@denx.de>
8676 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
8677 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8678 Date: Fri Jul 27 16:44:31 2007 +0200
8680 new FPGA image for PLU405 board
8682 new FPGA image for PLU405 board with improved CompactFlash timing
8684 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8686 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
8687 Author: Rafal Jaworowski <raj@semihalf.com>
8688 Date: Fri Jul 27 14:43:59 2007 +0200
8690 [ADS5121] Support for the ADS5121 board
8692 The following MPC5121e subsystems are supported:
8694 - low-level CPU init
8695 - NOR Boot Flash (common CFI driver)
8701 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8702 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8703 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
8705 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
8706 Author: Rafal Jaworowski <raj@semihalf.com>
8707 Date: Fri Jul 27 14:22:04 2007 +0200
8709 [PPC] Remove unused MSR_USER definition
8711 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8713 commit d4024bb72dd81695ec099b2199eda0d27c623e62
8714 Author: John Otken <john@softadvances.com>
8715 Date: Thu Jul 26 17:49:11 2007 +0200
8717 ppc4xx: Add support for AMCC 405EP Taihu board
8719 Signed-off-by: John Otken <john@softadvances.com>
8721 commit b66091de6c7390620312c2501db23d8391e7cabb
8722 Author: Anatolij Gustschin <agust@denx.de>
8723 Date: Thu Jul 26 15:08:01 2007 +0200
8725 ppc4xx: lwmon5: Update Lime initialization
8727 Change Lime SDRAM initialization to now support 100MHz and
8728 133MHz (if enabled). Also the framebuffer is initialized to
8729 display a blue rectangle with a white border.
8731 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8732 Signed-off-by: Stefan Roese <sr@denx.de>
8734 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
8735 Author: Stefan Roese <sr@denx.de>
8736 Date: Tue Jul 24 09:52:52 2007 +0200
8738 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
8740 The used Intel NOR FLASH chips have internally two dies, and are now
8741 treated as two seperate chips.
8743 Signed-off-by: Stefan Roese <sr@denx.de>
8745 commit aedf5bde179ecfbd0a96130d18996a96518b785f
8746 Author: Stefan Roese <sr@denx.de>
8747 Date: Tue Jul 24 07:20:09 2007 +0200
8749 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
8751 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
8752 interrupt controller.
8754 Signed-off-by: Stefan Roese <sr@denx.de>
8756 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
8757 Author: Stefan Roese <sr@denx.de>
8758 Date: Fri Jul 20 15:03:44 2007 +0200
8760 ppc4xx: Fix bug with default GPIO output value
8762 As spotted by Matthias Fuchs, the default output values for all GPIO1
8763 outputs were not setup correctly. This patch fixes this issue.
8765 Signed-off-by: Stefan Roese <sr@denx.de>
8767 commit 531e3e8b831f357056448fa573137d5fb37000fd
8768 Author: Pavel Kolesnikov <concord@emcraft.com>
8769 Date: Fri Jul 20 15:03:03 2007 +0200
8771 POST: Add ECC POST for the lwmon5 board
8773 This patch adds ECC Post test for the Lwmon5 board based
8774 on PPC440EPx to U-Boot.
8776 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
8777 Acked-by: Yuri Tikhonov <yur@emcraft.com>
8778 Acked-by: Stefan Roese <sr@denx.de>
8780 commit cc3023b9f95d7ac959a764471a65001062aecf41
8781 Author: Rafal Jaworowski <raj@semihalf.com>
8782 Date: Thu Jul 19 17:12:28 2007 +0200
8784 Fix breakage of 8xx boards from recent commit.
8786 This patch fixes the negative consequences for 8xx of the recent
8787 "ppc4xx: Clean up 440 exceptions handling" commit.
8789 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8791 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
8792 Author: Stefan Roese <sr@denx.de>
8793 Date: Mon Jul 16 13:11:12 2007 +0200
8795 Coding style cleanup
8797 Signed-off-by: Stefan Roese <sr@denx.de>
8799 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
8800 Author: Stefan Roese <sr@denx.de>
8801 Date: Mon Jul 16 10:02:12 2007 +0200
8803 ppc4xx: Code cleanup
8805 Signed-off-by: Stefan Roese <sr@denx.de>
8807 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
8808 Author: Stefan Roese <sr@denx.de>
8809 Date: Mon Jul 16 10:01:38 2007 +0200
8811 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
8813 Signed-off-by: Stefan Roese <sr@denx.de>
8815 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
8816 Author: Stefan Roese <sr@denx.de>
8817 Date: Mon Jul 16 10:00:43 2007 +0200
8819 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
8821 The new boardspecific DDR2 controller configuration is used for the Yucca
8822 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
8824 Signed-off-by: Stefan Roese <sr@denx.de>
8826 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
8827 Author: Stefan Roese <sr@denx.de>
8828 Date: Mon Jul 16 09:57:00 2007 +0200
8830 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
8832 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
8833 support non default, boardspecific DDR(2) controller configuration.
8835 Signed-off-by: Stefan Roese <sr@denx.de>
8837 commit 5743a9207a370b90f09b20ebd61167c806b937f3
8838 Author: Stefan Roese <sr@denx.de>
8839 Date: Mon Jul 16 08:53:51 2007 +0200
8841 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
8843 The new function remove_tlb() can be used to remove the TLB's used to
8844 map a specific memory region. This is especially useful for the DDR(2)
8845 setup routines which configure the SDRAM area temporarily as a cached
8846 area (for speedup on auto-calibration and ECC generation) and later
8847 need this area uncached for normal usage.
8849 Signed-off-by: Stefan Roese <sr@denx.de>
8851 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
8852 Author: Michal Simek <monstr@monstr.eu>
8853 Date: Mon Jul 16 00:31:07 2007 +0200
8855 [PATCH] Support for Xilinx EmacLite controller
8857 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
8858 Author: Wolfgang Denk <wd@denx.de>
8859 Date: Sat Jul 14 22:51:02 2007 +0200
8863 Signed-off-by: Wolfgang Denk <wd@denx.de>
8865 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
8866 Author: Michal Simek <monstr@monstr.eu>
8867 Date: Sat Jul 14 13:11:28 2007 +0200
8869 [FIX] support for simply measuring time
8871 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
8872 Author: Michal Simek <monstr@monstr.eu>
8873 Date: Sat Jul 14 12:41:23 2007 +0200
8875 [FS] Added support for ROMFS
8877 commit 011595307731a7a67a7445d107c279d031e8ab97
8878 Author: Heiko Schocher <hs@pollux.denx.de>
8879 Date: Sat Jul 14 01:06:58 2007 +0200
8881 [PCS440EP] - fix compile error, if BUILD_DIR is used
8883 commit 5a2f1098d81ad58b309e5e558d0492643166a799
8884 Author: Michal Simek <monstr@monstr.eu>
8885 Date: Sat Jul 14 00:18:48 2007 +0200
8887 [PATCH] Support time without timer
8889 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
8890 Author: Michal Simek <monstr@monstr.eu>
8891 Date: Fri Jul 13 21:43:55 2007 +0200
8893 [PATCH] Remove problem with disabled BARREL SHIFTER
8895 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
8896 Author: Michal Simek <monstr@monstr.eu>
8897 Date: Fri Jul 13 21:41:44 2007 +0200
8899 [FIX] correct help for rspr
8901 commit fad63407154f46246ce80d53a9c669a44362ac67
8902 Author: Heiko Schocher <hs@pollux.denx.de>
8903 Date: Fri Jul 13 09:54:17 2007 +0200
8905 make show_boot_progress () weak.
8907 Signed-off-by: Heiko Schocher <hs@denx.de>
8909 commit 907902472391b6ca1876ec300687562ecaf459b1
8910 Author: Heiko Schocher <hs@pollux.denx.de>
8911 Date: Fri Jul 13 08:26:05 2007 +0200
8913 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
8914 - fix compile error, if BUILD_DIR is used
8916 Signed-off-by: Heiko Schocher <hs@denx.de>
8918 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
8919 Author: Stefan Roese <sr@denx.de>
8920 Date: Thu Jul 12 16:32:08 2007 +0200
8922 ppc4xx: Change receive buffer handling in the 4xx emac driver
8924 This change fixes a bug in the receive buffer handling, that
8925 could lead to problems upon high network traffic (broadcasts...).
8927 Signed-off-by: Stefan Roese <sr@denx.de>
8929 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
8930 Author: Wolfgang Denk <wd@denx.de>
8931 Date: Thu Jul 12 01:45:34 2007 +0200
8933 Update CHANGELOG, minor coding style cleanup.
8935 Signed-off-by: Wolfgang Denk <wd@denx.de>
8937 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
8938 Author: Andy Fleming <afleming@freescale.com>
8939 Date: Fri Jun 8 16:41:18 2007 -0500
8941 Remove erroneous errata code from Marvel 88E1111S driver
8943 The Marvel 88E1111S driver for the TSEC was copied from the
8944 88E1101 driver, and included a fix for an erratum which does not
8945 exist on that part. Now it is removed
8947 Signed-off-by: Andy Fleming <afleming@freescale.com>
8949 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
8950 Author: Andy Fleming <afleming@freescale.com>
8951 Date: Tue Jun 5 16:38:44 2007 -0500
8953 From: eran liberty <eran.liberty@gmail.com>
8955 adds the reset register to 85xx immap
8957 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
8958 Signed-off-by: Andy Fleming <afleming@freescale.com>
8960 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
8961 Author: Andy Fleming <afleming@freescale.com>
8962 Date: Thu May 10 17:50:01 2007 -0500
8964 Polished the 85xx ADS config files
8966 Made the boot commands use device trees by default.
8967 Also moved the ramdisk to 1000000 (I think the previous address
8968 was getting overridden during boot).
8970 Signed-off-by: Andy Fleming <afleming@freescale.com>
8972 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
8973 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8974 Date: Wed May 9 11:03:32 2007 -0500
8976 8544ds: Fix Makefile after moving pixis to board/freescale.
8978 The OBJTREE != SRCTREE build scenario was broken.
8981 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8982 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8984 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
8985 Author: Andy Fleming <afleming@freescale.com>
8986 Date: Wed May 9 00:54:20 2007 -0500
8988 tsec: Fix PHY code to match first driver
8990 Jarrold Wen noticed that the generic PHY code always matches
8991 under the current implementation. Change it so the first match
8992 wins, and *only* unknown PHYs trigger the generic driver
8994 Signed-off-by: Andy Fleming <afleming@freescale.com>
8996 commit ccc091aac61a38cd998d575d92f7232e256d6312
8997 Author: Andy Fleming <afleming@freescale.com>
8998 Date: Tue May 8 17:27:43 2007 -0500
9000 Add support for CPM device tree configuration to 8560 ADS
9002 * Adds code to modify CPM frequencies
9003 * Cleans up the config file to #define TSEC and (for now) #undef FCC
9004 * Adds the MII command for all 8560 ADS configurations
9005 * Updates config file to provide convenience commands for booting
9008 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
9009 Signed-off-by: Andy Fleming <afleming@freescale.com>
9011 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
9012 Author: Andy Fleming <afleming@freescale.com>
9013 Date: Tue May 8 17:23:02 2007 -0500
9015 Fix Marvell 88e1145 PHY init code
9017 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
9018 where the reset was being done after the errata code instead of
9021 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
9022 Signed-off-by: Andy Fleming <afleming@freescale.com>
9024 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
9025 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9026 Date: Wed Jul 11 14:52:16 2007 -0500
9028 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
9030 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9032 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
9033 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9034 Date: Wed Jul 11 14:52:08 2007 -0500
9036 pciauto setup bridge
9038 The P2P bridge bus numbers programmed into the device are relative to
9041 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9043 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
9044 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9045 Date: Wed Jul 11 14:52:01 2007 -0500
9047 Support PCIe extended config registers
9049 FSL PCIe block has extended cfg registers in the 100 and 400 range.
9050 For example, to read the LTSSM register: pci display <busn>.0 404 1
9052 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9054 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
9055 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9056 Date: Wed Jul 11 14:51:48 2007 -0500
9058 Minor improvements to drivers/pci_auto.c
9060 - Make pciauto_{pre,post}scan_setup_bridge non-static
9061 - Added physical address display in debug messages.
9063 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9065 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
9066 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9067 Date: Wed Jul 11 14:51:35 2007 -0500
9069 Start pci hose scan from hose->current_busno.
9071 Ensure hose->current_busno is not less than first_busno. This fixes
9072 broken board code which leaves current_busno=0 when first_busno is
9073 greater than 0 for the cases with multiple controllers.
9075 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9077 commit 3865b1fb7843a08ad49a6319a36415752276ff48
9078 Author: Stefan Roese <sr@denx.de>
9079 Date: Wed Jul 11 12:13:53 2007 +0200
9081 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
9083 Signed-off-by: Stefan Roese <sr@denx.de>
9085 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
9086 Author: Bartlomiej Sieka <tur@semihalf.com>
9087 Date: Wed Jul 11 20:11:07 2007 +0200
9089 CM1.QP1: Support for the Schindler CM1.QP1 board.
9091 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
9092 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9094 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
9095 Author: Heiko Schocher <hs@pollux.denx.de>
9096 Date: Wed Jul 11 18:39:11 2007 +0200
9098 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
9099 - now the Flash ST M29W040B is supported (not tested)
9100 - fix the "led" command
9101 - fix compile error, if BUILD_DIR is used
9103 Signed-off-by: Heiko Schocher <hs@denx.de>
9105 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
9106 Author: Stefan Roese <sr@denx.de>
9107 Date: Sun Jul 8 13:44:27 2007 +0200
9109 Fix malloc problem introduced with the relocation fixup for the PPC platform
9111 The relocation fixup didn't handle the malloc pointer initialization
9112 correctly. This patch fixes this problem. Tested successfully on 4xx.
9113 The relocation fixup patches for 4xx will follow soon.
9115 Signed-off-by: Stefan Roese <sr@denx.de>
9117 commit 0dca874db62718e41253659e60f3a1de7eb418ce
9118 Author: TsiChung <tcliew@Goku.(none)>
9119 Date: Tue Jul 10 15:45:43 2007 -0500
9121 Cache update and added CFG_UNIFY_CACHE
9123 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
9125 Signed-off-by: TsiChung <tcliew@Goku.(none)>
9127 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
9128 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9129 Date: Thu Jul 5 23:36:16 2007 -0500
9131 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
9133 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
9135 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9137 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
9138 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9139 Date: Thu Jul 5 23:31:25 2007 -0500
9143 Include immap.h and renamed mcfrtc.h to rtc.h
9145 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9147 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
9148 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9149 Date: Thu Jul 5 23:29:21 2007 -0500
9151 Add mcffec_initialize()
9153 Added mcffec_initialize() in eth_initialize()
9155 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9157 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
9158 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9159 Date: Thu Jul 5 23:27:40 2007 -0500
9161 Update header file and clean up
9165 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9167 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
9168 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9169 Date: Thu Jul 5 23:23:15 2007 -0500
9171 New uart structure and defines
9173 Seperated from mcfuart.h
9175 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9177 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
9178 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9179 Date: Thu Jul 5 23:22:31 2007 -0500
9181 New timer structure and defines
9183 Seperated from mcftimer.h
9185 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9187 commit e04acb2eba4782489417240eff76e20e176aec10
9188 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9189 Date: Thu Jul 5 23:21:09 2007 -0500
9191 Rename mcfrtc to rtc
9193 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
9195 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9197 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
9198 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9199 Date: Thu Jul 5 23:17:36 2007 -0500
9201 Rename mcfserial.c. Update include header
9203 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
9205 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9207 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
9208 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9209 Date: Thu Jul 5 23:13:58 2007 -0500
9211 Header file update, clean up and cache handling
9213 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
9215 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9217 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
9218 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9219 Date: Thu Jul 5 23:10:40 2007 -0500
9221 Create interrupts.c and modify Makefile
9223 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
9225 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9227 commit ddd104f1ed655eda50c06ba636237a83ed943f34
9228 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9229 Date: Thu Jul 5 23:06:55 2007 -0500
9233 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9235 commit b9bf3de377b2bae70c983c9b97feae914999e735
9236 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9237 Date: Thu Jul 5 23:05:31 2007 -0500
9239 Update header file and some clean up
9241 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
9243 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9245 commit 84a015b52ec820a5ae173717d78516de731c89c2
9246 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9247 Date: Thu Jul 5 23:03:28 2007 -0500
9249 Update header file and enable icache
9251 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
9253 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9255 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
9256 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9257 Date: Thu Jul 5 23:01:22 2007 -0500
9259 Update header file and removed interrupt_init()
9261 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
9263 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9265 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
9266 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9267 Date: Thu Jul 5 22:57:46 2007 -0500
9269 Update for flash.o and mii.o
9271 Removed flash.o and added mii.o
9273 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9275 commit c5ded275d839e4ff79f41718d50a835d989f57bc
9276 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9277 Date: Thu Jul 5 22:56:19 2007 -0500
9279 MII functions calls.
9281 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9283 commit 427c814104560e29bda14955c67703245aaaa5b4
9284 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9285 Date: Thu Jul 5 22:54:42 2007 -0500
9287 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
9289 The removed MII routines will be placed in mii.c.
9291 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9293 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
9294 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9295 Date: Thu Jul 5 22:51:05 2007 -0500
9299 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
9301 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9303 commit 2744354a8437b8f78db178e30660215688bff570
9304 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9305 Date: Thu Jul 5 22:46:38 2007 -0500
9307 Seperate old structure defines and new structure defines
9309 Removed new uart structure and defines to uart.h
9311 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9313 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
9314 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9315 Date: Thu Jul 5 22:45:01 2007 -0500
9317 Seperate old structure defines and new structure defines
9319 New timer structure and defines will move to new timer.h
9321 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9323 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
9324 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9325 Date: Thu Jul 5 22:42:23 2007 -0500
9331 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9333 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
9334 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9335 Date: Thu Jul 5 22:41:24 2007 -0500
9339 Replaced whitespace with tabs
9341 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9343 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
9344 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9345 Date: Thu Jul 5 22:39:07 2007 -0500
9347 Create new header file and move peripherals base address from configs file to new header file.
9349 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
9351 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9353 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
9354 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9355 Date: Thu Jul 5 22:24:58 2007 -0500
9359 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
9361 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9363 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
9364 Author: Jon Loeliger <jdl@freescale.com>
9365 Date: Tue Jul 10 11:19:50 2007 -0500
9367 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
9369 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9370 Those always evaluated TRUE, and thus were always compiled
9371 even when IDE really wasn't defined/wanted.
9373 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9375 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
9376 Author: Jon Loeliger <jdl@freescale.com>
9377 Date: Tue Jul 10 11:13:21 2007 -0500
9379 drivers/: Remove lingering references to CFG_CMD_* symbols.
9381 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9382 Those always evaluated TRUE, and thus were always compiled
9383 even when IDE really wasn't defined/wanted.
9385 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9387 commit f40a7f3e3888b42a43674b099e5470022c8c544c
9388 Author: Jon Loeliger <jdl@freescale.com>
9389 Date: Tue Jul 10 11:07:56 2007 -0500
9391 fs/: Remove lingering references to CFG_CMD_* symbols.
9393 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9394 Those always evaluated TRUE, and thus were always compiled
9395 even when IDE really wasn't defined/wanted.
9397 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9399 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
9400 Author: Jon Loeliger <jdl@freescale.com>
9401 Date: Tue Jul 10 11:05:02 2007 -0500
9403 net/: Remove lingering references to CFG_CMD_* symbols.
9405 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9406 Those always evaluated TRUE, and thus were always compiled
9407 even when IDE really wasn't defined/wanted.
9409 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9411 commit 902531788376046da212afd1661cffb62f3daa1c
9412 Author: Jon Loeliger <jdl@freescale.com>
9413 Date: Tue Jul 10 11:02:44 2007 -0500
9415 common/: Remove lingering references to CFG_CMD_* symbols.
9417 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9418 Those always evaluated TRUE, and thus were always compiled
9419 even when IDE really wasn't defined/wanted.
9421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9423 commit d39b57415838c73fb0a37eca84de3c68ba990586
9424 Author: Jon Loeliger <jdl@freescale.com>
9425 Date: Tue Jul 10 10:48:22 2007 -0500
9427 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
9429 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9430 Those always evaluated TRUE, and thus were always compiled
9431 even when IDE really wasn't defined/wanted.
9433 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9435 commit 77a318545d57aefa844752465b94c7e09a3f26d0
9436 Author: Jon Loeliger <jdl@freescale.com>
9437 Date: Tue Jul 10 10:39:10 2007 -0500
9439 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
9441 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9442 Those always evaluated TRUE, and thus were always compiled
9443 even when IDE really wasn't defined/wanted.
9445 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9447 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
9448 Author: Jon Loeliger <jdl@freescale.com>
9449 Date: Tue Jul 10 10:27:39 2007 -0500
9451 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
9453 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9455 commit 079a136c3588814784561d6e4856970ee82d6e2a
9456 Author: Jon Loeliger <jdl@freescale.com>
9457 Date: Tue Jul 10 10:12:10 2007 -0500
9459 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
9461 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9462 used to be included but CONFIG_BOOTP_MASK was not defined.
9464 Remove lingering references to CFG_CMD_* symbols.
9466 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9468 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
9469 Author: Jon Loeliger <jdl@freescale.com>
9470 Date: Tue Jul 10 09:38:02 2007 -0500
9472 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
9474 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9475 used to be included but CONFIG_BOOTP_MASK was not defined.
9477 Remove lingering references to CFG_CMD_* symbols.
9479 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9481 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
9482 Author: Jon Loeliger <jdl@freescale.com>
9483 Date: Tue Jul 10 09:29:01 2007 -0500
9485 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
9487 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9488 used to be included but CONFIG_BOOTP_MASK was not defined.
9490 Remove lingering references to CFG_CMD_* symbols.
9492 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9494 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
9495 Author: Jon Loeliger <jdl@freescale.com>
9496 Date: Tue Jul 10 09:22:23 2007 -0500
9498 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
9500 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9501 used to be included but CONFIG_BOOTP_MASK was not defined.
9503 Remove lingering references to CFG_CMD_* symbols.
9505 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9507 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
9508 Author: Jon Loeliger <jdl@freescale.com>
9509 Date: Tue Jul 10 09:10:49 2007 -0500
9511 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
9513 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9514 used to be included but CONFIG_BOOTP_MASK was not defined.
9516 Remove lingering references to CFG_CMD_* symbols.
9518 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9520 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
9521 Author: Jon Loeliger <jdl@freescale.com>
9522 Date: Tue Jul 10 09:02:57 2007 -0500
9524 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
9526 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9527 used to be included but CONFIG_BOOTP_MASK was not defined.
9529 Remove lingering references to CFG_CMD_* symbols.
9531 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9533 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
9534 Author: Jon Loeliger <jdl@freescale.com>
9535 Date: Mon Jul 9 22:08:34 2007 -0500
9537 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
9539 All of the choices for CONFIG_BOOTP_ are now documented in
9540 the README file. You must now individually select exactly
9541 the set that you want using a series of
9542 #define CONFIG_BOOTP_<x>
9543 statements in the board port config files now.
9545 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9547 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
9548 Author: Jon Loeliger <jdl@freescale.com>
9549 Date: Mon Jul 9 21:57:31 2007 -0500
9551 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9553 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9555 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
9556 Author: Jon Loeliger <jdl@freescale.com>
9557 Date: Mon Jul 9 21:48:26 2007 -0500
9559 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9561 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9563 commit 37d4bb70586659dedef1658ce1bed071be098aec
9564 Author: Jon Loeliger <jdl@freescale.com>
9565 Date: Mon Jul 9 21:38:02 2007 -0500
9567 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9569 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9571 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
9572 Author: Jon Loeliger <jdl@freescale.com>
9573 Date: Mon Jul 9 21:31:24 2007 -0500
9575 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9577 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9579 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
9580 Author: Jon Loeliger <jdl@freescale.com>
9581 Date: Mon Jul 9 21:24:19 2007 -0500
9583 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9585 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9587 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
9588 Author: Jon Loeliger <jdl@freescale.com>
9589 Date: Mon Jul 9 21:16:53 2007 -0500
9591 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9593 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9595 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
9596 Author: Jon Loeliger <jdl@freescale.com>
9597 Date: Mon Jul 9 19:12:30 2007 -0500
9599 Retire CONFIG_COMMANDS finally.
9600 Strip old CFG_CMD_* symbols out.
9602 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9604 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
9605 Author: Jon Loeliger <jdl@freescale.com>
9606 Date: Mon Jul 9 19:10:03 2007 -0500
9608 Update README.* to reference new CONFIG_CMD_* names now.
9610 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9612 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
9613 Author: Jon Loeliger <jdl@freescale.com>
9614 Date: Mon Jul 9 19:06:00 2007 -0500
9616 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
9618 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9620 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
9621 Author: Jon Loeliger <jdl@freescale.com>
9622 Date: Mon Jul 9 18:57:22 2007 -0500
9624 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
9626 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9628 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
9629 Author: Jon Loeliger <jdl@freescale.com>
9630 Date: Mon Jul 9 18:45:16 2007 -0500
9632 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
9634 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9636 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
9637 Author: Jon Loeliger <jdl@freescale.com>
9638 Date: Mon Jul 9 18:38:39 2007 -0500
9640 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
9642 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9644 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
9645 Author: Jon Loeliger <jdl@freescale.com>
9646 Date: Mon Jul 9 18:31:28 2007 -0500
9648 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
9650 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9652 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
9653 Author: Jon Loeliger <jdl@freescale.com>
9654 Date: Mon Jul 9 18:24:55 2007 -0500
9656 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
9658 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9660 commit fcec2eb93e126400009729328e797f12bc94f1fd
9661 Author: Jon Loeliger <jdl@freescale.com>
9662 Date: Mon Jul 9 18:19:09 2007 -0500
9664 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
9666 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9668 commit a593814f2be0c9cdc3133cd550b167b8a988328f
9669 Author: Jon Loeliger <jdl@freescale.com>
9670 Date: Mon Jul 9 18:10:50 2007 -0500
9672 rtc/: Remove obsolete references to CONFIG_COMMANDS
9674 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9676 commit 67350568f9d46e66c21829f3513b3db0caeb948b
9677 Author: Jon Loeliger <jdl@freescale.com>
9678 Date: Mon Jul 9 18:05:38 2007 -0500
9680 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
9682 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9684 commit 7def6b34f910f08d7ef0a14646da067719237ca2
9685 Author: Jon Loeliger <jdl@freescale.com>
9686 Date: Mon Jul 9 18:02:11 2007 -0500
9688 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
9690 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9692 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
9693 Author: Jon Loeliger <jdl@freescale.com>
9694 Date: Mon Jul 9 17:56:50 2007 -0500
9696 fs/: Remove obsolete references to CONFIG_COMMANDS
9698 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9700 commit c91898bbc505aff3e12a807af88e76da18efb7ee
9701 Author: Jon Loeliger <jdl@freescale.com>
9702 Date: Mon Jul 9 17:46:09 2007 -0500
9704 tools/: Remove obsolete references to CONFIG_COMMANDS
9706 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9708 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
9709 Author: Jon Loeliger <jdl@freescale.com>
9710 Date: Mon Jul 9 17:45:14 2007 -0500
9712 net/: Remove obsolete references to CONFIG_COMMANDS
9714 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9716 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
9717 Author: Jon Loeliger <jdl@freescale.com>
9718 Date: Mon Jul 9 17:39:42 2007 -0500
9720 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
9722 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9724 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
9725 Author: Jon Loeliger <jdl@freescale.com>
9726 Date: Mon Jul 9 17:30:01 2007 -0500
9728 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
9730 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9732 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
9733 Author: Jon Loeliger <jdl@freescale.com>
9734 Date: Mon Jul 9 17:22:37 2007 -0500
9736 disk/: Remove obsolete references to CONFIG_COMMANDS
9738 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9740 commit 639221c76c88215bd55af83ad174fc30d1940f8f
9741 Author: Jon Loeliger <jdl@freescale.com>
9742 Date: Mon Jul 9 17:15:49 2007 -0500
9744 include/: Remove obsolete references to CONFIG_COMMANDS
9745 Mostly removed from comments here.
9747 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9749 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
9750 Author: Wolfgang Denk <wd@denx.de>
9751 Date: Tue Jul 10 00:01:28 2007 +0200
9753 Coding style cleanup; update CHANGELOG.
9755 Signed-off-by: Wolfgang Denk <wd@denx.de>
9757 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
9758 Author: Stefan Roese <sr@denx.de>
9759 Date: Mon Jul 9 11:00:24 2007 +0200
9761 Small coding style cleanup
9763 Signed-off-by: Stefan Roese <sr@denx.de>
9765 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
9766 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9767 Date: Mon Jul 9 10:10:08 2007 +0200
9769 Migrate esd 405EP boards to new NAND subsystem
9771 Remove unused CFG_NAND_LEGACY define
9773 These boards to not have NAND.
9775 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9777 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
9778 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9779 Date: Mon Jul 9 10:10:06 2007 +0200
9781 Migrate esd 405EP boards to new NAND subsystem
9783 Migrate esd 405EP boards to new NAND subsystem
9786 -use correct io accessors (in/out_be32())
9788 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9790 commit e09f7ab5749c345f924da272bea0521a73af5b11
9791 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9792 Date: Mon Jul 9 10:10:04 2007 +0200
9794 Migrate esd 405EP boards to new NAND subsystem
9796 This patch prepares the migration from the legacy NAND driver
9797 to U-Boot's new NAND subsystem for esd boards.
9799 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9801 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
9802 Author: Jon Loeliger <jdl@freescale.com>
9803 Date: Sun Jul 8 18:10:08 2007 -0500
9805 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
9807 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9809 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
9810 Author: Jon Loeliger <jdl@freescale.com>
9811 Date: Sun Jul 8 18:05:39 2007 -0500
9813 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
9815 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9817 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
9818 Author: Jon Loeliger <jdl@freescale.com>
9819 Date: Sun Jul 8 18:02:23 2007 -0500
9821 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
9823 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9825 commit baa26db4113679b80970ff447d91cc10217742a6
9826 Author: Jon Loeliger <jdl@freescale.com>
9827 Date: Sun Jul 8 17:51:39 2007 -0500
9829 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
9831 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9833 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
9834 Author: Jon Loeliger <jdl@freescale.com>
9835 Date: Sun Jul 8 17:02:01 2007 -0500
9837 Clear up confusion over the CMD_POST and POST_DIAG mess.
9839 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
9840 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
9841 Clear this mess up some.
9843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9845 commit b3631487105a57ab7cbadfc26efbaf9676275018
9846 Author: Jon Loeliger <jdl@freescale.com>
9847 Date: Sun Jul 8 15:45:08 2007 -0500
9849 Remove references to the old cmd_confdefs.h include file.
9851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9853 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
9854 Author: Jon Loeliger <jdl@freescale.com>
9855 Date: Sun Jul 8 15:42:59 2007 -0500
9857 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
9859 Use new CONFIG_CMD_* in lwmon5.h board config file.
9860 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
9862 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9864 commit a5562901661bd428f7e5feb333f796372cb81019
9865 Author: Jon Loeliger <jdl@freescale.com>
9866 Date: Sun Jul 8 15:31:57 2007 -0500
9868 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
9870 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9872 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
9873 Author: Jon Loeliger <jdl@freescale.com>
9874 Date: Sun Jul 8 15:02:44 2007 -0500
9876 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
9878 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9880 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
9881 Author: Jon Loeliger <jdl@freescale.com>
9882 Date: Sun Jul 8 15:12:40 2007 -0500
9884 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
9886 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9888 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
9889 Author: Jon Loeliger <jdl@freescale.com>
9890 Date: Sun Jul 8 14:55:07 2007 -0500
9892 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
9894 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9896 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
9897 Author: Jon Loeliger <jdl@freescale.com>
9898 Date: Sun Jul 8 14:49:44 2007 -0500
9900 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
9902 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9904 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
9905 Author: Jon Loeliger <jdl@freescale.com>
9906 Date: Sun Jul 8 14:21:43 2007 -0500
9908 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
9910 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9912 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
9913 Author: Jon Loeliger <jdl@freescale.com>
9914 Date: Sun Jul 8 14:14:17 2007 -0500
9916 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
9918 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9920 commit 348f258f24253433e4a2302a0bbceb6740a67246
9921 Author: Jon Loeliger <jdl@freescale.com>
9922 Date: Sun Jul 8 13:46:18 2007 -0500
9924 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
9926 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9928 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
9929 Author: Jon Loeliger <jdl@freescale.com>
9930 Date: Sun Jul 8 10:09:35 2007 -0500
9932 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
9934 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9936 commit 60a0876b5106b34220e459c208bbf648073306c0
9937 Author: Jon Loeliger <jdl@freescale.com>
9938 Date: Sat Jul 7 21:04:26 2007 -0500
9940 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
9942 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9944 commit dcaa71562826a2466e894c868d132509dcda8444
9945 Author: Jon Loeliger <jdl@freescale.com>
9946 Date: Sat Jul 7 20:56:05 2007 -0500
9948 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
9950 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9952 commit 3c3227f3c737502311b25b72084573901cbbf17d
9953 Author: Jon Loeliger <jdl@freescale.com>
9954 Date: Sat Jul 7 20:40:43 2007 -0500
9956 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
9958 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9960 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
9961 Author: Jon Loeliger <jdl@freescale.com>
9962 Date: Thu Jul 5 19:52:35 2007 -0500
9964 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
9966 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9968 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
9969 Author: Jon Loeliger <jdl@freescale.com>
9970 Date: Thu Jul 5 19:32:07 2007 -0500
9972 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
9974 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9976 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
9977 Author: Jon Loeliger <jdl@freescale.com>
9978 Date: Thu Jul 5 19:13:52 2007 -0500
9980 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
9982 Since ADS860.h includes "board/fads/fads.h" with ramifications
9983 on the CONFIG_COMMAND treatment, it too has to be adjusted to
9984 exclude already configured commands in this same commit.
9986 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9988 commit 10e038932f22ee80ebd53de312531e70e6590a2f
9989 Author: Thomas Knobloch <knobloch@siemens.com>
9990 Date: Fri Jul 6 14:58:39 2007 +0200
9992 [NAND] Bad block skipping for command nboot
9994 The old implementation of command nboot does not support reading the image from
9995 NAND flash with skipping of bad blocks. The patch implements a new version of
9996 the nboot command: by calling nboot.jffs2 from the u-boot command line the
9997 command will load the image from NAND flash with respect to bad blocks (by using
9998 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
10001 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
10002 Signed-off-by: Stefan Roese <sr@denx.de>
10004 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
10005 Author: Stefan Roese <sr@denx.de>
10006 Date: Fri Jul 6 12:26:51 2007 +0200
10008 ppc4xx: Update lwmon5 default environment
10010 Signed-off-by: Stefan Roese <sr@denx.de>
10012 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
10013 Author: Stefan Roese <sr@denx.de>
10014 Date: Fri Jul 6 11:48:24 2007 +0200
10016 ppc4xx: Update lwmon5 board
10018 Add unlock=yes environment variable to default variables to unlock
10019 the CFI flash by default.
10021 Signed-off-by: Stefan Roese <sr@denx.de>
10023 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
10024 Author: Stefan Roese <sr@denx.de>
10025 Date: Fri Jul 6 09:45:47 2007 +0200
10027 Fix problem with get/setdcr commands introduced by cfg patches
10029 Signed-off-by: Stefan Roese <sr@denx.de>
10031 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
10032 Author: Wolfgang Denk <wd@denx.de>
10033 Date: Fri Jul 6 02:50:19 2007 +0200
10035 Code cleanup and default config update for STC GP3 SSA board.
10037 Signed-off-by: Wolfgang Denk <wd@denx.de>
10039 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
10040 Author: Wolfgang Denk <wd@denx.de>
10041 Date: Thu Jul 5 17:56:27 2007 +0200
10043 Fixing some typos etc. introduced mainly by cfg patches.
10045 Signed-off-by: Wolfgang Denk <wd@denx.de>
10047 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
10048 Author: Wolfgang Denk <wd@denx.de>
10049 Date: Thu Jul 5 11:12:16 2007 +0200
10051 Minor coding style cleanup. Update CHANGELOG.
10053 commit dca3b3d6d6396b67e5e84af53452164923c73443
10054 Author: Jon Loeliger <jdl@jdl.com>
10055 Date: Wed Jul 4 22:33:46 2007 -0500
10057 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
10059 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10061 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
10062 Author: Jon Loeliger <jdl@jdl.com>
10063 Date: Wed Jul 4 22:33:38 2007 -0500
10065 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
10067 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10069 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
10070 Author: Jon Loeliger <jdl@jdl.com>
10071 Date: Wed Jul 4 22:33:30 2007 -0500
10073 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
10075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10077 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
10078 Author: Jon Loeliger <jdl@jdl.com>
10079 Date: Wed Jul 4 22:33:23 2007 -0500
10081 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
10083 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10085 commit 26a34560d56a9df5bc2ae23525d9229736134757
10086 Author: Jon Loeliger <jdl@jdl.com>
10087 Date: Wed Jul 4 22:33:17 2007 -0500
10089 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
10091 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10093 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
10094 Author: Jon Loeliger <jdl@jdl.com>
10095 Date: Wed Jul 4 22:33:13 2007 -0500
10097 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
10099 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10101 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
10102 Author: Jon Loeliger <jdl@jdl.com>
10103 Date: Wed Jul 4 22:33:07 2007 -0500
10105 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
10107 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10109 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
10110 Author: Jon Loeliger <jdl@jdl.com>
10111 Date: Wed Jul 4 22:33:01 2007 -0500
10113 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
10115 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10117 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
10118 Author: Jon Loeliger <jdl@jdl.com>
10119 Date: Wed Jul 4 22:32:57 2007 -0500
10121 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
10123 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10125 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
10126 Author: Jon Loeliger <jdl@jdl.com>
10127 Date: Wed Jul 4 22:32:51 2007 -0500
10129 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
10131 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10133 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
10134 Author: Jon Loeliger <jdl@jdl.com>
10135 Date: Wed Jul 4 22:32:32 2007 -0500
10137 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
10139 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10141 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
10142 Author: Jon Loeliger <jdl@jdl.com>
10143 Date: Wed Jul 4 22:32:25 2007 -0500
10145 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
10147 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10149 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
10150 Author: Jon Loeliger <jdl@jdl.com>
10151 Date: Wed Jul 4 22:32:19 2007 -0500
10153 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
10155 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10157 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
10158 Author: Jon Loeliger <jdl@jdl.com>
10159 Date: Wed Jul 4 22:32:10 2007 -0500
10161 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
10163 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10165 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
10166 Author: Jon Loeliger <jdl@jdl.com>
10167 Date: Wed Jul 4 22:32:03 2007 -0500
10169 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
10171 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10173 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
10174 Author: Jon Loeliger <jdl@jdl.com>
10175 Date: Wed Jul 4 22:31:56 2007 -0500
10177 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
10179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10181 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
10182 Author: Jon Loeliger <jdl@jdl.com>
10183 Date: Wed Jul 4 22:31:49 2007 -0500
10185 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
10187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10189 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
10190 Author: Jon Loeliger <jdl@jdl.com>
10191 Date: Wed Jul 4 22:31:42 2007 -0500
10193 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
10195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10197 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
10198 Author: Jon Loeliger <jdl@jdl.com>
10199 Date: Wed Jul 4 22:31:35 2007 -0500
10201 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
10203 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10205 commit d794cfefead5fc177cf4f41164e80382e9c9484a
10206 Author: Jon Loeliger <jdl@jdl.com>
10207 Date: Wed Jul 4 22:31:15 2007 -0500
10209 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
10211 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10213 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
10214 Author: Jon Loeliger <jdl@jdl.com>
10215 Date: Wed Jul 4 22:31:07 2007 -0500
10217 include/configs: Use new CONFIG_CMD_* in STx board config files.
10219 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10221 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
10222 Author: Jon Loeliger <jdl@jdl.com>
10223 Date: Wed Jul 4 22:30:58 2007 -0500
10225 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
10227 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10229 commit 2694690e285acaa34922f55f4b5ae030da60c55a
10230 Author: Jon Loeliger <jdl@jdl.com>
10231 Date: Wed Jul 4 22:30:50 2007 -0500
10233 include/configs: Use new CONFIG_CMD_* in TQM board config files.
10235 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10237 commit 1cc4c458329765b58e584a19821e796b3c10e976
10238 Author: Jon Loeliger <jdl@jdl.com>
10239 Date: Wed Jul 4 22:30:28 2007 -0500
10241 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
10243 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10245 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
10246 Author: Jon Loeliger <jdl@jdl.com>
10247 Date: Wed Jul 4 22:30:06 2007 -0500
10249 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
10251 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10253 commit b44896215a09c60fa40cae906f7ed207bbc2c492
10254 Author: Sergei Poselenov <sposelenov@emcraft.com>
10255 Date: Thu Jul 5 08:17:37 2007 +0200
10257 Merged POST framework with the current TOT.
10259 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10261 commit b24629fa377214d63bb40d1360e354b6d3e4af56
10262 Author: Jon Loeliger <jdl@jdl.com>
10263 Date: Wed Jun 13 13:23:15 2007 -0500
10265 mpc86xx: Remove old CFG_CMD_* references.
10267 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10269 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
10270 Author: Jon Loeliger <jdl@jdl.com>
10271 Date: Wed Jun 13 13:22:54 2007 -0500
10273 Add MPC8568MDS to MAKEALL 85xx target.
10275 It was missing from the original port submission.
10277 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10279 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
10280 Author: Jon Loeliger <jdl@jdl.com>
10281 Date: Wed Jun 13 13:22:08 2007 -0500
10283 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
10285 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10287 commit 56b304ac2091689506088a9ae67f63fd6300cf16
10288 Author: Jon Loeliger <jdl@jdl.com>
10289 Date: Wed Jun 13 13:21:37 2007 -0500
10291 Fix #if typo in CONFIG_CMD_* changes.
10293 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10295 commit f780b83316d9af1f61d71cc88b1917b387b9b995
10296 Author: Niklaus Giger <niklausgiger@gmx.ch>
10297 Date: Wed Jun 27 18:11:38 2007 +0200
10299 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
10301 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
10303 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
10304 Author: Stefan Roese <sr@denx.de>
10305 Date: Wed Jul 4 10:06:30 2007 +0200
10307 ppc4xx: Update lwmon5 board
10309 - Add optional ECC generation routine to preserve existing
10310 RAM values. This is needed for the Linux log-buffer support
10311 - Add optional DDR2 setup with CL=4
10312 - GPIO50 not used anymore
10313 - Lime register setup added
10315 Signed-off-by: Stefan Roese <sr@denx.de>
10317 commit 6810a34677dbc446334f5e451f1682426dd33b49
10318 Author: Grant Likely <grant.likely@secretlab.ca>
10319 Date: Tue Jul 3 00:17:28 2007 -0600
10321 Fix Makefile to use $(MKCONFIG) macro for all board ports
10323 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10325 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
10326 Author: Grant Likely <grant.likely@secretlab.ca>
10327 Date: Tue Jul 3 00:17:28 2007 -0600
10329 Fix Makefile to use $(MKCONFIG) macro for all board ports
10331 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10333 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
10334 Author: Grant Likely <grant.likely@secretlab.ca>
10335 Date: Tue Jul 3 00:34:49 2007 -0600
10337 Correct fixup relocation for mpc83xx
10339 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10341 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
10342 Author: Grant Likely <grant.likely@secretlab.ca>
10343 Date: Tue Jul 3 00:34:44 2007 -0600
10345 Correct fixup relocation for mpc8260
10347 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10349 commit f3a52fe05923935db86985daf9438e2f70ac39aa
10350 Author: Grant Likely <grant.likely@secretlab.ca>
10351 Date: Tue Jul 3 00:34:39 2007 -0600
10353 Correct fixup relocation for mpc824x
10355 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10357 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
10358 Author: Grant Likely <grant.likely@secretlab.ca>
10359 Date: Tue Jul 3 00:34:34 2007 -0600
10361 Correct fixup relocation for mpc8220
10363 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10365 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
10366 Author: Grant Likely <grant.likely@secretlab.ca>
10367 Date: Tue Jul 3 00:34:29 2007 -0600
10369 Correct fixup relocation for MPC5xxx
10371 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10373 commit 3649cd99ba815b6601868735765602f00ef3692b
10374 Author: Grant Likely <grant.likely@secretlab.ca>
10375 Date: Tue Jul 3 00:34:24 2007 -0600
10377 Correct relocation fixup for mpc5xx
10379 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10381 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
10382 Author: Grant Likely <grant.likely@secretlab.ca>
10383 Date: Tue Jul 3 00:34:19 2007 -0600
10385 Don't set gd->reloc_off if relocation of .fixup works correctly
10387 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10389 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
10390 Author: Grant Likely <grant.likely@secretlab.ca>
10391 Date: Tue Jul 3 00:34:14 2007 -0600
10393 Remove obsolete mpc83xx linker scripts
10395 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10397 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
10398 Author: Grant Likely <grant.likely@secretlab.ca>
10399 Date: Tue Jul 3 00:34:09 2007 -0600
10401 Consolidate mpc8260 linker scripts
10403 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10405 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
10406 Author: Grant Likely <grant.likely@secretlab.ca>
10407 Date: Tue Jul 3 00:34:04 2007 -0600
10409 Remove obsolete mpc824x linker scripts
10411 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10413 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
10414 Author: Grant Likely <grant.likely@secretlab.ca>
10415 Date: Tue Jul 3 00:33:59 2007 -0600
10417 Remove obsolete mpc824x linker scripts (3 of 4)
10419 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10421 commit a71c084f3ac7fedf144537db2b2da47323068833
10422 Author: Grant Likely <grant.likely@secretlab.ca>
10423 Date: Tue Jul 3 00:33:53 2007 -0600
10425 Remove obsolete mpc824x linker scripts (2 of 4)
10427 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10429 commit f670a15468d1365241d40022b9408e1004181f5e
10430 Author: Grant Likely <grant.likely@secretlab.ca>
10431 Date: Tue Jul 3 00:33:48 2007 -0600
10433 Remove obsolete mpc824x linker scripts (1 of 4)
10435 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10437 commit 09555bd45a04c0e54f172528d21bc18896550d28
10438 Author: Grant Likely <grant.likely@secretlab.ca>
10439 Date: Tue Jul 3 00:33:43 2007 -0600
10441 Remove obsolete mpc8220 linker scripts
10443 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10445 commit 5efb992f046e51225c93d52f80fecbe433abd789
10446 Author: Grant Likely <grant.likely@secretlab.ca>
10447 Date: Tue Jul 3 00:33:38 2007 -0600
10449 Remove obsolete mpc5xxx linker scripts (3 of 3)
10451 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10453 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
10454 Author: Grant Likely <grant.likely@secretlab.ca>
10455 Date: Tue Jul 3 00:33:33 2007 -0600
10457 Remove obsolete mpc5xxx linker scripts (2 of 3)
10459 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10461 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
10462 Author: Grant Likely <grant.likely@secretlab.ca>
10463 Date: Tue Jul 3 00:33:28 2007 -0600
10465 Remove obsolete mpc5xxx linker scripts (1 of 3)
10467 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10469 commit b7d8e05f8675249b5f208aa73babeed384a4519d
10470 Author: Grant Likely <grant.likely@secretlab.ca>
10471 Date: Tue Jul 3 00:33:23 2007 -0600
10473 Remove obsolete mpc5xx linker scripts
10475 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10477 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
10478 Author: Grant Likely <grant.likely@secretlab.ca>
10479 Date: Tue Jul 3 00:33:18 2007 -0600
10481 Consolidate mpc83xx linker scripts
10483 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10485 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
10486 Author: Grant Likely <grant.likely@secretlab.ca>
10487 Date: Tue Jul 3 00:33:13 2007 -0600
10489 Consolidate mpc8260 linker scripts
10491 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10493 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
10494 Author: Grant Likely <grant.likely@secretlab.ca>
10495 Date: Tue Jul 3 00:33:08 2007 -0600
10497 Consolidate mpc824x linker scripts
10499 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10501 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
10502 Author: Grant Likely <grant.likely@secretlab.ca>
10503 Date: Tue Jul 3 00:33:03 2007 -0600
10505 Consolidate mpc8220 linker scripts
10507 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10509 commit d181c9a15cd41863fe24840d17848429f27d3c8c
10510 Author: Grant Likely <grant.likely@secretlab.ca>
10511 Date: Tue Jul 3 00:32:58 2007 -0600
10513 Consolidate mpc5xxx linker scripts
10515 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10517 commit 287ac924adb7291bebe5086652a362a30ab28b13
10518 Author: Grant Likely <grant.likely@secretlab.ca>
10519 Date: Tue Jul 3 00:32:53 2007 -0600
10521 Consolidate mpc5xx linker scripts
10523 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10525 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
10526 Author: Wolfgang Denk <wd@denx.de>
10527 Date: Wed Jul 4 00:43:53 2007 +0200
10529 Fix a few file permission problems.
10531 Signed-off-by: Wolfgang Denk <wd@denx.de>
10533 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
10534 Author: Wolfgang Denk <wd@denx.de>
10535 Date: Wed Jul 4 00:38:38 2007 +0200
10537 Minor coding style cleanup. Rebuild CHANGELOG file.
10539 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
10540 Author: Jon Loeliger <jdl@jdl.com>
10541 Date: Mon Jun 11 19:03:44 2007 -0500
10543 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
10545 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10547 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
10548 Author: Jon Loeliger <jdl@jdl.com>
10549 Date: Mon Jun 11 19:03:39 2007 -0500
10551 README: Rewrite command line config to use CONFIG_CMD_* names.
10553 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10555 commit 72a074cec68e5bad60d63206c050974e08afd804
10556 Author: Jon Loeliger <jdl@jdl.com>
10557 Date: Mon Jun 11 19:03:34 2007 -0500
10559 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10561 This is a compatibility step that allows both the older form
10562 and the new form to co-exist for a while until the older can
10563 be removed entirely.
10565 All transformations are of the form:
10567 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10569 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10571 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10573 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
10574 Author: Jon Loeliger <jdl@jdl.com>
10575 Date: Mon Jun 11 19:03:28 2007 -0500
10577 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10579 This is a compatibility step that allows both the older form
10580 and the new form to co-exist for a while until the older can
10581 be removed entirely.
10583 All transformations are of the form:
10585 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10587 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10589 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10591 commit 9107ebe0d352420895ab69b715697bdebc8caf50
10592 Author: Jon Loeliger <jdl@jdl.com>
10593 Date: Mon Jun 11 19:03:23 2007 -0500
10595 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10597 This is a compatibility step that allows both the older form
10598 and the new form to co-exist for a while until the older can
10599 be removed entirely.
10601 All transformations are of the form:
10603 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10605 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10609 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
10610 Author: Jon Loeliger <jdl@jdl.com>
10611 Date: Mon Jun 11 19:03:19 2007 -0500
10613 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10615 This is a compatibility step that allows both the older form
10616 and the new form to co-exist for a while until the older can
10617 be removed entirely.
10619 All transformations are of the form:
10621 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10623 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10625 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10627 commit 737184114ec9c9e0ab94d6713536126073bd2472
10628 Author: Jon Loeliger <jdl@jdl.com>
10629 Date: Mon Jun 11 19:03:15 2007 -0500
10631 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10633 This is a compatibility step that allows both the older form
10634 and the new form to co-exist for a while until the older can
10635 be removed entirely.
10637 All transformations are of the form:
10639 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10641 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10643 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10645 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
10646 Author: Jon Loeliger <jdl@jdl.com>
10647 Date: Mon Jun 11 19:03:08 2007 -0500
10649 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10651 This is a compatibility step that allows both the older form
10652 and the new form to co-exist for a while until the older can
10653 be removed entirely.
10655 All transformations are of the form:
10657 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10659 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10661 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10663 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
10664 Author: Jon Loeliger <jdl@jdl.com>
10665 Date: Mon Jun 11 19:03:03 2007 -0500
10667 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10669 This is a compatibility step that allows both the older form
10670 and the new form to co-exist for a while until the older can
10671 be removed entirely.
10673 All transformations are of the form:
10675 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10677 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10679 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10681 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
10682 Author: Jon Loeliger <jdl@jdl.com>
10683 Date: Mon Jun 11 19:02:58 2007 -0500
10685 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10687 This is a compatibility step that allows both the older form
10688 and the new form to co-exist for a while until the older can
10689 be removed entirely.
10691 All transformations are of the form:
10693 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10695 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10697 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10699 commit 98b79003c21c2578206003256de4e781d6b36ca8
10700 Author: Jon Loeliger <jdl@jdl.com>
10701 Date: Mon Jun 11 19:02:53 2007 -0500
10703 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10705 This is a compatibility step that allows both the older form
10706 and the new form to co-exist for a while until the older can
10707 be removed entirely.
10709 All transformations are of the form:
10711 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10713 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10715 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10717 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
10718 Author: Jon Loeliger <jdl@jdl.com>
10719 Date: Mon Jun 11 19:02:49 2007 -0500
10721 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10723 This is a compatibility step that allows both the older form
10724 and the new form to co-exist for a while until the older can
10725 be removed entirely.
10727 All transformations are of the form:
10729 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10731 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10733 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10735 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
10736 Author: Jon Loeliger <jdl@jdl.com>
10737 Date: Mon Jun 11 19:02:34 2007 -0500
10739 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10741 This is a compatibility step that allows both the older form
10742 and the new form to co-exist for a while until the older can
10743 be removed entirely.
10745 All transformations are of the form:
10747 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10749 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10751 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10753 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
10754 Author: Jon Loeliger <jdl@jdl.com>
10755 Date: Mon Jun 11 19:02:20 2007 -0500
10757 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10759 This is a compatibility step that allows both the older form
10760 and the new form to co-exist for a while until the older can
10761 be removed entirely.
10763 All transformations are of the form:
10765 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10767 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10769 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10771 commit d5be43de93ff905c465e509d45a3164ef48d26e7
10772 Author: Jon Loeliger <jdl@jdl.com>
10773 Date: Mon Jun 11 19:02:10 2007 -0500
10775 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10777 This is a compatibility step that allows both the older form
10778 and the new form to co-exist for a while until the older can
10779 be removed entirely.
10781 All transformations are of the form:
10783 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10785 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10787 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10789 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
10790 Author: Jon Loeliger <jdl@jdl.com>
10791 Date: Mon Jun 11 19:02:05 2007 -0500
10793 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10795 This is a compatibility step that allows both the older form
10796 and the new form to co-exist for a while until the older can
10797 be removed entirely.
10799 All transformations are of the form:
10801 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10803 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10805 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10807 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
10808 Author: Jon Loeliger <jdl@jdl.com>
10809 Date: Mon Jun 11 19:01:54 2007 -0500
10811 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10813 This is a compatibility step that allows both the older form
10814 and the new form to co-exist for a while until the older can
10815 be removed entirely.
10817 All transformations are of the form:
10819 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10821 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10823 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10825 commit a76adc8142c1d956385a109e0b70f9319ede4d66
10826 Author: Jon Loeliger <jdl@jdl.com>
10827 Date: Mon Jun 11 19:01:43 2007 -0500
10829 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10831 This is a compatibility step that allows both the older form
10832 and the new form to co-exist for a while until the older can
10833 be removed entirely.
10835 All transformations are of the form:
10837 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10839 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10841 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10843 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
10844 Author: Jon Loeliger <jdl@jdl.com>
10845 Date: Mon Jun 11 19:01:34 2007 -0500
10847 Introduce initial versions of new Command Config files.
10849 Derive three new files from cmd_confdefs.h:
10850 config_bootp.h - Has BOOTP related config options, not commands
10851 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
10852 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
10854 For now, include "config_bootp.h" for compatability until all
10855 users of it directly include it properly.
10857 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10859 commit 1f2a05898658900dc5717761e27abf2052e67e13
10860 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
10861 Date: Sat Jun 30 18:50:48 2007 +0200
10865 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
10867 commit a5d71e290f3673269be8eefb4ec44f53412f9461
10868 Author: Heiko Schocher <hs@pollux.denx.de>
10869 Date: Mon Jun 25 19:11:37 2007 +0200
10871 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
10873 Signed-off-by: Heiko Schocher <hs@denx.de>
10875 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
10876 Author: Niklaus Giger <niklaus.giger@nestal.com>
10877 Date: Mon Jun 25 17:03:13 2007 +0200
10879 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
10881 This patch prints the DDR status registers upon machine check
10882 interrupt on the 440EPx/GRx. This can be useful especially when
10883 ECC support is enabled.
10885 I added some small changes to the original patch from Niklaus to
10886 make it compile clean.
10888 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
10889 Signed-off-by: Stefan Roese <sr@denx.de>
10891 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
10892 Author: Niklaus Giger <niklaus.giger@nestal.com>
10893 Date: Mon Jun 25 16:50:55 2007 +0200
10895 ppc4xx: Fix O=buildir builds
10897 This patch fixes the problem to assemble cpu/ppc4xx/start.S
10898 experienced last week where building failed having specified
10899 O=../build.sequoia.
10901 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
10903 commit 466fff1a7bb5fe764a06450626f6098219f446b8
10904 Author: Stefan Roese <sr@denx.de>
10905 Date: Mon Jun 25 15:57:39 2007 +0200
10907 ppc4xx: Add pci_pre_init() for 405 boards
10909 This patch removes the CFG_PCI_PRE_INIT option completely, since
10910 it's not needed anymore with the patch from Matthias Fuchs with
10911 the "weak" pci_pre_init() implementation.
10913 Signed-off-by: Stefan Roese <sr@denx.de>
10915 commit 6f35c53166213c24a5a0e2390ed861136ff73870
10916 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10917 Date: Sun Jun 24 17:41:21 2007 +0200
10919 ppc4xx: Maintenance patch for esd's CPCI405 derivats
10921 -add pci_pre_init() for pci interrupt fixup code
10922 -disable phy sleep mode via reset_phy() function
10923 -use correct io accessors
10926 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10928 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
10929 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10930 Date: Sun Jun 24 17:23:41 2007 +0200
10932 ppc4xx: Add pci_pre_init() for 405 boards
10934 This patch adds support for calling a plattform dependant
10935 pci_pre_init() function for 405 boards. This can be used to
10936 move the current pci_405gp_fixup_irq() function into the
10939 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
10940 A default function with 'weak' attribute is used when
10941 a board specific pci_pre_init() is not implemented.
10943 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10945 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
10946 Author: Wolfgang Denk <wd@denx.de>
10947 Date: Fri Jun 22 23:59:00 2007 +0200
10949 Coding stylke cleanup; rebuild CHANGELOG
10951 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
10952 Author: Igor Lisitsin <igor@emcraft.com>
10953 Date: Wed Apr 18 14:55:19 2007 +0400
10955 Adapt log buffer code to support Linux 2.6
10957 A new environment variable, "logversion", selects the log buffer
10958 behaviour. If it is not set or set to a value other than 2, then the
10959 old, Linux 2.4.4, behaviour is selected.
10961 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
10964 commit a11e06965ec91270c51853407ff1261d3c740386
10965 Author: Igor Lisitsin <igor@emcraft.com>
10966 Date: Wed Mar 28 19:06:19 2007 +0400
10968 Extend POST support for PPC440
10970 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
10972 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
10975 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
10976 Author: Heiko Schocher <hs@pollux.denx.de>
10977 Date: Fri Jun 22 19:11:54 2007 +0200
10979 [PCS440EP] upgrade the PCS440EP board:
10980 - Show on the Status LEDs, some States of the board.
10981 - Get the MAC addresses from the EEProm
10983 - use the CF on the board.
10984 - check the U-Boot image in the Flash with a SHA1
10986 - use dynamic TLB entries generation for the SDRAM
10988 Signed-off-by: Heiko Schocher <hs@denx.de>
10990 commit 3a1f5c81b0b9557817a789bece839905581c2205
10991 Author: Stefan Roese <sr@denx.de>
10992 Date: Fri Jun 22 16:58:40 2007 +0200
10994 ppc4xx: Fix problem with extended program_tlb() funtion
10996 The recently extended program_tlb() function had a problem when
10997 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
10998 virtual address was not incremented. This patch fixes this issue
10999 and is tested on Katmai with 512MB SDRAM.
11001 Signed-off-by: Stefan Roese <sr@denx.de>
11003 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
11004 Author: Rafal Jaworowski <raj@semihalf.com>
11005 Date: Fri Jun 22 14:58:04 2007 +0200
11007 [ppc] Fix build breakage for all non-4xx PowerPC variants.
11009 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
11010 - minor 4xx cleanup
11012 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
11013 Author: Mike Frysinger <vapier@gentoo.org>
11014 Date: Fri Jun 22 10:34:12 2007 +0200
11016 [patch] add nand_init() prototype to nand.h
11018 since nand_init() is expected to be called by other parts of u-boot, there
11019 should be a prototype for it in nand.h
11021 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11022 Signed-off-by: Stefan Roese <sr@denx.de>
11024 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
11025 Author: Wolfgang Denk <wd@denx.de>
11026 Date: Wed Jun 20 18:14:24 2007 +0200
11028 Coding style cleanup. Refresh CHANGELOG.
11030 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
11031 Author: Stefan Roese <sr@denx.de>
11032 Date: Tue Jun 19 17:22:44 2007 +0200
11034 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
11036 This patch adds a board command to configure the I2C bootstrap EEPROM
11037 values. Right now 533 and 667MHz are supported for booting either via NOR
11038 or NAND FLASH. Here the usage:
11040 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
11041 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
11043 Signed-off-by: Stefan Roese <sr@denx.de>
11045 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
11046 Author: Stefan Roese <sr@denx.de>
11047 Date: Tue Jun 19 16:42:31 2007 +0200
11049 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
11051 The latest changes showed a problem with the location of the NAND-SPL
11052 image in the OCM and the init-data area (incl. cache). This patch
11053 fixes this problem.
11055 Signed-off-by: Stefan Roese <sr@denx.de>
11057 commit 86ba99e34194394052d24c04dc40d1263d29a26f
11058 Author: Stefan Roese <sr@denx.de>
11059 Date: Tue Jun 19 16:40:58 2007 +0200
11061 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
11063 Signed-off-by: Stefan Roese <sr@denx.de>
11065 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
11066 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11067 Date: Mon Jun 18 13:50:13 2007 -0500
11069 Added M5329AFEE and M5329BFEE Platforms
11071 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
11072 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
11073 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
11076 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
11077 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
11078 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
11079 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
11080 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
11081 lib_m68k/time.c, net/eth.c and rtc/Makefile
11083 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11085 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
11086 Author: Michal Simek <monstr@monstr.eu>
11087 Date: Sun Jun 17 19:04:11 2007 +0200
11089 [fix] email reparation
11091 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
11092 Author: Michal Simek <monstr@monstr.eu>
11093 Date: Sun Jun 17 19:03:21 2007 +0200
11095 [FIX] fix microblaze file permitission
11097 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
11098 Author: Stefan Roese <sr@denx.de>
11099 Date: Fri Jun 15 11:33:41 2007 +0200
11101 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
11103 Now CONFIG_440 has to be defined in all PPC440 board config files.
11105 Signed-off-by: Stefan Roese <sr@denx.de>
11107 commit efa35cf12d914d4caba942acd5a6c45f217de302
11108 Author: Grzegorz Bernacki <gjb@semihalf.com>
11109 Date: Fri Jun 15 11:19:28 2007 +0200
11111 ppc4xx: Clean up 440 exceptions handling
11113 - Introduced dedicated switches for building 440 and 405 images required
11114 for 440-specific machine instructions like 'rfmci' etc.
11116 - Exception vectors moved to the proper location (_start moved away from
11117 the critical exception handler space, which it occupied)
11119 - CriticalInput now serviced (with default handler)
11121 - MachineCheck properly serviced (added a dedicated handler and return
11124 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
11125 unhandled and those not relevant for 4xx were eliminated)
11127 - Eliminated Linux leftovers, removed dead code
11129 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
11130 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
11131 Signed-off-by: Stefan Roese <sr@denx.de>
11133 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
11134 Author: Stefan Roese <sr@denx.de>
11135 Date: Fri Jun 15 08:18:01 2007 +0200
11137 [ppc4xx] Add initial lwmon5 board support
11139 This patch adds initial support for the Liebherr lwmon5 board euqipped
11140 with an AMCC 440EPx PowerPC.
11142 Signed-off-by: Stefan Roese <sr@denx.de>
11144 commit 85f737376d5ff3d5f0d45a8b657686326d175307
11145 Author: Stefan Roese <sr@denx.de>
11146 Date: Fri Jun 15 07:39:43 2007 +0200
11148 [ppc4xx] Extend 44x GPIO setup with default output state
11150 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
11151 is extended with the default GPIO output state (level).
11153 Signed-off-by: Stefan Roese <sr@denx.de>
11155 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
11156 Author: Stefan Roese <sr@denx.de>
11157 Date: Thu Jun 14 11:14:32 2007 +0200
11159 [ppc4xx] Extend program_tlb() with virtual & physical addresses
11161 Now program_tlb() allows to program a TLB (or multiple) with
11162 different virtual and physical addresses. With this change, now one
11163 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
11164 diabled and once with caches enabled.
11166 Signed-off-by: Stefan Roese <sr@denx.de>
11168 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
11169 Author: Detlev Zundel <dzu@denx.de>
11170 Date: Wed May 23 19:02:41 2007 +0200
11172 Change 'repeatable' attribute of some commands to sensible values.
11174 Most prominently this changes 'erase' to be non-repeatable.
11176 Signed-off-by: Detlev Zundel <dzu@denx.de>
11178 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
11179 Author: Detlev Zundel <dzu@denx.de>
11180 Date: Wed May 23 18:47:48 2007 +0200
11182 Fix 'run' not to continue after interrupted command
11184 Signed-off-by: Detlev Zundel <dzu@denx.de>
11186 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
11187 Author: Jason Jin <Jason.jin@freescale.com>
11188 Date: Mon Jun 11 15:14:24 2007 +0200
11190 USB: This patch fix readl in ohci swap reg access.
11192 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
11194 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
11195 Author: Bartlomiej Sieka <tur@semihalf.com>
11196 Date: Fri Jun 8 14:52:22 2007 +0200
11198 TQM5200: Add Flat Device Tree support, update default env. accordingly.
11200 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
11201 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11203 commit 9045f33c023f698660a2e45d1b2194c0711abebc
11204 Author: Wolfgang Denk <wd@denx.de>
11205 Date: Fri Jun 8 10:24:58 2007 +0200
11207 Fix config problems on SC3 board; make ide_reset_timeout work.
11209 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
11210 Author: Benoît Monin <bmonin@adeneo.eu>
11211 Date: Fri Jun 8 09:55:24 2007 +0200
11213 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
11215 Set the correct value in GPIOx_TCR when configuring the gpio
11216 with CFG_440_GPIO_TABLE.
11218 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
11219 Signed-off-by: Stefan Roese <sr@denx.de>
11221 commit f539edc076cfe52bff919dd512ba8d7af0e22092
11222 Author: Vadim Bendebury <vbendeb@google.com>
11223 Date: Thu May 24 15:52:25 2007 -0700
11225 cosmetic changes to bcm570x driver
11227 This is a cosmetic only changes submission.
11228 It affects files relevant to bcm570x driver.
11229 the commands used to generate this change was
11232 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
11234 The BMW target (the only one using this chip so far) builds cleanly, the
11235 `before and after' generated object files for drivers/bcm570x.c and
11236 drivers/tigon3.o are identical as reported by objdump -d
11238 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
11239 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11241 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
11242 Author: Wolfgang Denk <wd@denx.de>
11243 Date: Wed Jun 6 16:26:56 2007 +0200
11245 Coding Style cleanup; generate new CHANGELOG file.
11247 Signed-off-by: Wolfgang Denk <wd@denx.de>
11249 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
11250 Author: Markus Klotzbuecher <mk@denx.de>
11251 Date: Wed Jun 6 11:49:44 2007 +0200
11253 TRAB, USB: update trab board configuration for use of generic ohci driver
11255 commit dace45acd1c1357daa9322099d07c9a9e08b0024
11256 Author: Markus Klotzbuecher <mk@denx.de>
11257 Date: Wed Jun 6 11:49:43 2007 +0200
11259 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
11261 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
11262 Author: Markus Klotzbuecher <mk@denx.de>
11263 Date: Wed Jun 6 11:49:43 2007 +0200
11265 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
11267 commit fc43be478f2aa37ce38acd85355038866e4162af
11268 Author: Markus Klotzbuecher <mk@denx.de>
11269 Date: Wed Jun 6 11:49:35 2007 +0200
11271 USB/OHCI: endianness cleanup in the generic ohci driver
11273 commit c440bfe6d6d92d66478a7e84402b31f48413617b
11274 Author: Stefan Roese <sr@denx.de>
11275 Date: Wed Jun 6 11:42:13 2007 +0200
11277 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
11279 This patch adds NAND booting support for the AMCC Acadia eval board.
11281 Please make sure to configure jumper J7 to position 2-3 when booting
11282 from NOR, and to position 1-2 when booting for NAND.
11284 I also added a board command to configure the I2C bootstrap EEPROM
11285 values. Right now only 267MHz is support for booting either via NOR
11286 or NAND FLASH. Here the usage:
11288 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
11289 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
11291 Signed-off-by: Stefan Roese <sr@denx.de>
11293 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
11294 Author: Rodolfo Giometti <giometti@linux.it>
11295 Date: Wed Jun 6 10:08:14 2007 +0200
11297 Files include/linux/byteorder/{big,little}_endian.h define
11298 __BIG_ENDIAN and __LITTLE_ENDIAN.
11300 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
11302 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
11303 Author: Zhang Wei <wei.zhang@freescale.com>
11304 Date: Wed Jun 6 10:08:14 2007 +0200
11306 Add USB PCI-OHCI, USB keyboard and event poll support to the
11307 MPC8641HPCN board config file.
11309 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
11311 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
11312 Author: Zhang Wei <wei.zhang@freescale.com>
11313 Date: Wed Jun 6 10:08:14 2007 +0200
11315 USB PCI-OHCI, interrupt pipe and usb event poll support
11317 This patch added USB PCI-OHCI chips support, interrupt pipe support
11318 and usb event poll support. For supporting the USB interrupt pipe, the
11319 globe urb_priv is moved to purb in ed struct. Now, we can process
11320 several urbs at one time. The interrupt pipe support codes are ported
11321 from Linux kernel 2.4.
11323 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
11325 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
11326 Author: Zhang Wei <wei.zhang@freescale.com>
11327 Date: Wed Jun 6 10:08:13 2007 +0200
11329 USB event poll support
11331 This patch adds USB event poll support, which could be used in usbkbd
11332 and other usb devices driver when the asynchronous interrupt
11333 processing is supported.
11335 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
11337 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
11338 Author: Rodolfo Giometti <giometti@linux.it>
11339 Date: Wed Jun 6 10:08:12 2007 +0200
11341 ISP116x: delay for crappy USB keys
11343 Using some (very) slow USB keys cause the USB host controller buffers
11344 are not ready to be read by the CPU so we need an extra delay before
11345 reading the USB storage data.
11347 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
11349 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
11350 Author: Markus Klotzbuecher <mk@denx.de>
11351 Date: Wed Jun 6 10:08:12 2007 +0200
11353 Change duplicate usb_cpu_init_fail to usb_board_init_fail
11355 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
11358 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11360 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
11361 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11362 Date: Tue Jun 5 12:30:52 2007 -0500
11364 mpc8641 image size cleanup
11366 e600 does not have a bootpg restriction.
11367 Move the version string to beginning of image at fff00000.
11368 Resetvec.S is not needed.
11369 Update flash copy instructions.
11370 Add tftpflash env variable
11372 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11373 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11375 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
11376 Author: Benoît Monin <bmonin@adeneo.eu>
11377 Date: Mon Jun 4 08:36:05 2007 +0200
11379 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
11381 The attached patch is mainly cosmetic, allowing u-boot to
11382 display the correct bootstrap option letter according to the
11385 The original patch was extended with 405EZ support by Stefan
11388 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
11389 Signed-off-by: Stefan Roese <sr@denx.de>
11391 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
11392 Author: Nikita V. Youshchenko <yoush@debian.org>
11393 Date: Wed May 23 12:45:19 2007 +0400
11395 fix compilation problem for mpc8349itx CFG_RAMBOOT
11397 Current include/configs/MPC8349ITX.h does contain some support for building
11398 image that will be started from memory (without putting in into flash).
11399 It could be triggered by building with TEXT_BASE set to a low value.
11401 However, this support is incomplete: using of low TEXT_BASE causes
11402 defining configuration macros in inconsistent way, which later leads
11403 to compilation errors. In particular. flash support is being disabled,
11404 but then flash structures get referenced.
11406 This patch fixes this, making it possible to build with low TEXT_BASE.
11408 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
11410 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11412 commit 8a364f0970de49949d635e60accf463c6443ef8c
11413 Author: Nikita V. Youshchenko <yoush@debian.org>
11414 Date: Wed May 23 12:45:25 2007 +0400
11416 add missing 'console' var to default mpc8349itx config
11418 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11420 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
11421 Author: Stefan Roese <sr@denx.de>
11422 Date: Fri Jun 1 16:18:17 2007 +0200
11424 ppc4xx: Add missing file for Bamboo NAND booting support
11426 Signed-off-by: Stefan Roese <sr@denx.de>
11428 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
11429 Author: Stefan Roese <sr@denx.de>
11430 Date: Fri Jun 1 15:58:19 2007 +0200
11432 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
11434 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
11435 suggested by AMCC it is not recommended to dynamically change the EBC
11436 speed after bootup. So we undo this change to be on the safe side.
11438 Signed-off-by: Stefan Roese <sr@denx.de>
11440 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
11441 Author: Stefan Roese <sr@denx.de>
11442 Date: Fri Jun 1 15:29:04 2007 +0200
11444 ppc4xx: Update Sequoia NAND booting support with ECC
11446 Signed-off-by: Stefan Roese <sr@denx.de>
11448 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
11449 Author: Stefan Roese <sr@denx.de>
11450 Date: Fri Jun 1 15:27:11 2007 +0200
11452 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
11454 This patch adds NAND booting support for the AMCC Bamboo eval board.
11455 Since the NAND-SPL boot image is limited to 4kbytes, this version
11456 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
11457 supported, since the setup code for I2C DIMM autodetection and
11458 configuration is too big for this NAND bootloader.
11460 Signed-off-by: Stefan Roese <sr@denx.de>
11462 commit 42be56f53c8b107868e6125c8524ae84293e95a7
11463 Author: Stefan Roese <sr@denx.de>
11464 Date: Fri Jun 1 15:23:04 2007 +0200
11466 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
11468 The U-Boot NAND booting support is now extended to support ECC
11469 upon loading of the NAND U-Boot image.
11471 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
11473 Signed-off-by: Stefan Roese <sr@denx.de>
11475 commit a471db07fbb65a841ffc9f4f112562b945230f98
11476 Author: Stefan Roese <sr@denx.de>
11477 Date: Fri Jun 1 15:19:29 2007 +0200
11479 ppc4xx: Prepare Bamboo port for NAND booting support
11481 This patch updates the "normal" Bamboo NOR booting port, so
11482 that it is compatible with the coming soon NAND booting
11485 It also enables the 2nd NAND flash on the Bamboo.
11487 Signed-off-by: Stefan Roese <sr@denx.de>
11489 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
11490 Author: Stefan Roese <sr@denx.de>
11491 Date: Fri Jun 1 15:16:58 2007 +0200
11493 ppc4xx: Update in_be32() functions and friends to latest Linux version
11495 Signed-off-by: Stefan Roese <sr@denx.de>
11497 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
11498 Author: Stefan Roese <sr@denx.de>
11499 Date: Fri Jun 1 15:15:12 2007 +0200
11501 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
11503 This patch adds hardware ECC support to the NDFC driver. It also
11504 changes the register access from using the "simple" in32/out32
11505 functions to the in_be32/out_be32 functions, which make sure
11506 that the access is correctly synced. This is the only recommended
11507 access to SoC registers in the current Linux kernel.
11509 Signed-off-by: Stefan Roese <sr@denx.de>
11511 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
11512 Author: Stefan Roese <sr@denx.de>
11513 Date: Fri Jun 1 15:12:15 2007 +0200
11515 NAND: Update nand_ecc.c to latest Linux version
11517 This patch updates the nand_ecc code to the latest Linux version.
11518 The main reason for this is the more compact code. This makes
11519 it possible to include the ECC code into the NAND bootloader
11520 image (NAND_SPL) for PPC4xx.
11522 Signed-off-by: Stefan Roese <sr@denx.de>
11524 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
11525 Author: Stefan Roese <sr@denx.de>
11526 Date: Fri Jun 1 15:09:50 2007 +0200
11528 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
11530 Signed-off-by: Stefan Roese <sr@denx.de>
11532 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
11533 Author: Stefan Roese <sr@denx.de>
11534 Date: Fri Jun 1 13:45:24 2007 +0200
11536 ppc4xx: Change Luan config file to support ECC
11538 With the updated 44x DDR2 driver the Luan board now supports
11539 ECC generation and checking.
11541 Signed-off-by: Stefan Roese <sr@denx.de>
11543 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
11544 Author: Stefan Roese <sr@denx.de>
11545 Date: Fri Jun 1 13:45:00 2007 +0200
11547 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
11549 Add config option for 180 degree advance clock control as needed
11550 for the AMCC Luan eval board.
11552 Signed-off-by: Stefan Roese <sr@denx.de>
11554 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
11555 Author: Wolfgang Denk <wd@denx.de>
11556 Date: Thu May 31 17:20:09 2007 +0200
11558 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
11560 Signed-off-by: Wolfgang Denk <wd@denx.de>
11562 commit 7049288fb1f16f1b317140226cdebd07bd416395
11563 Author: Bartlomiej Sieka <tur@semihalf.com>
11564 Date: Sun May 27 17:26:46 2007 +0200
11566 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
11568 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11570 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
11571 Author: Bartlomiej Sieka <tur@semihalf.com>
11572 Date: Sun May 27 17:06:36 2007 +0200
11574 Motion-PRO: Add support for redundant environment.
11576 Enable redundant environment, add a MTD partition for it; also add env.
11577 variable command for passing MTD partitions to the kernel command line.
11579 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11580 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11582 commit a26eabeec31746f06d309103690892805696e344
11583 Author: Bartlomiej Sieka <tur@semihalf.com>
11584 Date: Sun May 27 17:05:11 2007 +0200
11586 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
11588 Allow passing longer command line to the kernel - useful especially
11589 for passing MTD partition layout.
11591 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11592 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11594 commit 9160b96f71483a116de81c68985e8ee306d36764
11595 Author: Bartlomiej Sieka <tur@semihalf.com>
11596 Date: Sun May 27 17:04:18 2007 +0200
11598 Fix: Add missing NULL termination in strings expanded by macros parser.
11600 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11601 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11603 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
11604 Author: Bartlomiej Sieka <tur@semihalf.com>
11605 Date: Sun May 27 17:03:37 2007 +0200
11607 Motion-PRO: Update EEPROM's page write bits and write delay.
11609 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
11610 have a page write capability of two bytes", and "This device offers fast (1ms)
11611 byte write". Add 3ms of extra delay.
11613 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11614 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11616 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
11617 Author: Bartlomiej Sieka <tur@semihalf.com>
11618 Date: Sun May 27 16:58:45 2007 +0200
11620 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
11622 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
11623 networking does not function. This commit switches PHY to TX mode by clearing
11624 the FX_SEL bit of Mode Control Register. It also reverses commit
11625 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
11627 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
11628 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11630 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
11631 Author: Bartlomiej Sieka <tur@semihalf.com>
11632 Date: Sun May 27 16:57:15 2007 +0200
11634 Motion-PRO: Add support for the temperature sensor.
11636 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11637 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11639 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
11640 Author: Bartlomiej Sieka <tur@semihalf.com>
11641 Date: Sun May 27 16:55:23 2007 +0200
11643 Motion-PRO: Add displaying of CPLD revision information during boot.
11645 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
11646 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11648 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
11649 Author: Bartlomiej Sieka <tur@semihalf.com>
11650 Date: Sun May 27 16:53:43 2007 +0200
11652 MPC5xxx: Change names of defines related to IPB and PCI clocks.
11654 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
11655 them does not cause PCI or IPB clocks to run at the specified speed.
11656 Instead, they configure divisors used to calculate said clocks. This
11657 patch renames the defines according to their real function.
11659 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
11660 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11662 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
11663 Author: Bartlomiej Sieka <tur@semihalf.com>
11664 Date: Sun May 27 16:51:48 2007 +0200
11666 Motion-PRO: Add LED support.
11668 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
11669 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11670 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11672 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
11673 Author: Ulf Samuelsson <ulf@atmel.com>
11674 Date: Thu May 24 12:12:47 2007 +0200
11676 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
11678 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
11679 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
11680 Signed-off-by: Stefan Roese <sr@denx.de>
11682 commit d756894722c888d09a9fa1df8323753772d3dcce
11683 Author: Stefan Roese <sr@denx.de>
11684 Date: Thu May 24 09:49:00 2007 +0200
11686 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
11688 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
11689 fixes a small bug in the 405EZ OCM initialization. Thanks for
11692 Signed-off-by: Stefan Roese <sr@denx.de>
11694 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
11695 Author: Stefan Roese <sr@denx.de>
11696 Date: Thu May 24 08:22:09 2007 +0200
11698 ppc4xx: Update AMCC Acadia support for board revision 1.1
11700 This patch updates the Acadia (405EZ) support for the new 1.1 board
11701 revision. It also adds support for NAND FLASH via the 4xx NDFC.
11703 Please note that the jumper J7 must be in position 2-3 for this
11704 NAND support. Position 1-2 is for NAND booting only. NAND booting
11705 support will follow later.
11707 Signed-off-by: Stefan Roese <sr@denx.de>
11709 commit 822d55365bb557e084d0e33625a6dedcc866110b
11710 Author: Jon Loeliger <jdl@freescale.com>
11711 Date: Wed May 23 14:09:46 2007 -0500
11713 Add LIST_86xx MAKEALL target for PowerPC builds.
11715 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11717 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
11718 Author: Stefan Roese <sr@denx.de>
11719 Date: Tue May 22 12:48:09 2007 +0200
11721 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
11723 Signed-off-by: Stefan Roese <sr@denx.de>
11725 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
11726 Author: Stefan Roese <sr@denx.de>
11727 Date: Tue May 22 12:46:10 2007 +0200
11729 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
11731 This patch adds support for 405 PPC's to the 4xx NAND driver
11732 ndfc.c. This is in preparation for the new AMCC 405EZ.
11734 Signed-off-by: Stefan Roese <sr@denx.de>
11736 commit 10603d76767426be803dadd4fb688b97eb69481c
11737 Author: Stefan Roese <sr@denx.de>
11738 Date: Mon May 21 07:41:22 2007 +0200
11740 ppc4xx: Fix problem in 405EZ OCM initialization
11742 As spotted by Bruce Adler this patch fixes an initialization problem
11745 Signed-off-by: Stefan Roese <sr@denx.de>
11747 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
11748 Author: Peter Pearse <peter.pearse@arm.com>
11749 Date: Fri May 18 16:47:03 2007 +0100
11751 Reduce line lengths to 80 characters max.
11753 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
11754 Author: Peter Pearse <peter.pearse@arm.com>
11755 Date: Fri May 18 14:34:07 2007 +0100
11757 Makefile permissions
11759 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
11760 Author: Peter Pearse <peter.pearse@arm.com>
11761 Date: Fri May 18 14:33:11 2007 +0100
11763 Makefile permissions
11765 commit 255a3577c848706441daee0174543efe205a77f8
11766 Author: Kim Phillips <kim.phillips@freescale.com>
11767 Date: Wed May 16 16:52:19 2007 -0500
11769 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
11771 For all practical u-boot purposes, TSECs don't differ throughout the
11772 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
11774 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11776 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
11777 Author: Stefano Babic <sbabic@denx.de>
11778 Date: Wed May 16 14:49:12 2007 +0200
11780 Fix compile problem cause my Microblaze merge
11782 Signed-off-by: Stefano Babic <sbabic@denx.de>
11784 commit ada4697d0230d6da552867777f98a67ec3ba2579
11785 Author: Jeffrey Mann <mannj@embeddedplanet.com>
11786 Date: Wed May 16 13:23:10 2007 +0200
11788 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
11790 Because the Sequoia board does not boot with an EBC faster than 66MHz,
11791 the clock divider are changed after the initial boot process.
11793 This allows for maximum clocking speeds to be achieved on newer boards.
11794 Sequoia boards with 666.66 MHz processors require that the EBC divider
11795 be set to 3 in order to start the initial boot process at a slower EBC
11796 speed. After the initial boot process, the divider can be set back to 2,
11797 which will cause the boards to run at 83.333MHz. This is backward
11798 compatible with boards with 533.33 MHz processors, as these boards will
11799 already be set with an EBC divider of 2.
11801 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
11803 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
11804 Author: Wolfgang Denk <wd@denx.de>
11805 Date: Wed May 16 01:16:53 2007 +0200
11807 Minor Coding Style cleanup, update CHANGELOG.
11809 Signed-off-by: Wolfgang Denk <wd@denx.de>
11811 commit d62f64cc23a940eafe712c776b3249e4160753d1
11812 Author: Wolfgang Denk <wd@denx.de>
11813 Date: Wed May 16 00:13:33 2007 +0200
11815 Coding Style Cleanup, new CHANGELOG
11817 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
11818 Author: Wolfgang Denk <wd@denx.de>
11819 Date: Tue May 15 23:38:05 2007 +0200
11821 Minor coding style cleanup.
11823 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
11824 Author: mushtaq khan <mushtaq_k@procsys.com>
11825 Date: Fri Apr 20 14:23:02 2007 +0530
11827 Add driver for S-ATA-controller on Intel processors with South
11828 Bridge, ICH-5, ICH-6 and ICH-7.
11832 1. Code is divided in to two files. All functions, which are
11833 controller specific are kept in "drivers/ata_piix.c" file and
11834 functions, which are not controller specific, are kept in
11835 "common/cmd_sata.c" file.
11837 2. Reading and Writing from the S-ATA drive is done using PIO method.
11839 3. Driver can be configured for 48-bit addressing by defining macro
11840 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
11843 4. S-ATA read function is hooked to the File system, commands like
11844 ext2ls and ext2load file can be used. This has been tested.
11846 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
11847 controller and identifies the S-ATA drives connected to it.
11849 6. U-Boot command "sata" is added, which is used to read/write, print
11850 partition table and get info about the drives present. This I have
11851 implemented in same way as "ide" command is implemented in U-Boot.
11853 7. This driver is for S-ATA in native mode.
11855 8. This driver does not support the Native command queuing and
11858 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
11860 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
11861 Author: mushtaq khan <mushtaq_k@procsys.com>
11862 Date: Mon Apr 30 15:57:22 2007 +0530
11864 Fixes bug clearing the bss section for i386
11867 There is a bug in the code of clearing the bss section for processor
11868 i386.(File: cpu/i386/start.S)
11869 In the code, bss_start addr (starting addr of bss section) is put into
11870 the register %eax, but the code which clears the bss section refers to
11871 the addr pointed by %edi.
11873 This patch fixes this bug by putting bss_start into %edi register.
11875 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
11877 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
11878 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
11879 Date: Mon Apr 30 16:47:28 2007 -0500
11881 Add support for BCM5464 Quad Phy
11883 Added support for Broadcom's BCM5464 Quad Phy
11885 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
11887 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
11888 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
11889 Date: Wed May 9 08:10:57 2007 +0800
11891 Search the exception table with linear algorithm
11893 Search the exception table with linear algorithm instead of
11894 bisecting algorithm.
11895 Because the exception table might be unsorted.
11897 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11899 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
11900 Author: Aubrey.Li <aubrey.adi@gmail.com>
11901 Date: Mon May 14 11:47:35 2007 +0800
11903 Fix compilation issues on MACOSX
11905 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
11906 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
11908 commit 56fd7162985c412317bbf763a225fba23c64fd31
11909 Author: Stephen Williams <steve@icarus.com>
11910 Date: Tue May 15 07:55:42 2007 -0700
11912 Fix for compile of JSE target
11914 The attached patch fixes the compile of the JSE board in the
11915 denx git as of 14 may 2007. It is an extremely simple patch,
11916 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
11918 Fix to compile JSE against 20070514 git of u-boot
11920 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
11921 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
11922 Date: Sun May 13 21:01:03 2007 +0900
11924 sh: MS7750SE support.
11926 This adds support for the Hitachi MS7750SE.
11928 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11930 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
11931 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
11932 Date: Sun May 13 20:58:00 2007 +0900
11934 sh: First support code of SuperH.
11936 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11938 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
11939 Author: Stefan Roese <sr@denx.de>
11940 Date: Fri May 11 12:01:49 2007 +0200
11942 ppc4xx: Add mtcpr/mfcpr access macros
11944 Signed-off-by: Stefan Roese <sr@denx.de>
11946 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
11947 Author: Stefan Roese <sr@denx.de>
11948 Date: Fri May 11 12:01:06 2007 +0200
11950 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
11952 Signed-off-by: Stefan Roese <sr@denx.de>
11954 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
11955 Author: Piotr Kruszynski <ppk@semihalf.com>
11956 Date: Thu May 10 16:55:52 2007 +0200
11958 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
11961 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
11962 Author: Peter Pearse <peter.pearse@arm.com>
11963 Date: Wed May 9 11:42:44 2007 +0100
11965 Add the board directory for SMN42
11967 commit 160131bf965785419626df6c388729fe0b597992
11968 Author: Peter Pearse <peter.pearse@arm.com>
11969 Date: Wed May 9 11:41:58 2007 +0100
11971 Add the files for the SMN42 board
11973 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
11974 Author: Peter Pearse <peter.pearse@arm.com>
11975 Date: Wed May 9 11:40:34 2007 +0100
11977 Remove the deleted files for the SMN42 patch
11979 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
11980 Author: Peter Pearse <peter.pearse@arm.com>
11981 Date: Wed May 9 11:37:56 2007 +0100
11983 New board SMN42 branch
11985 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
11986 Author: Peter Pearse <peter.pearse@arm.com>
11987 Date: Wed May 9 10:24:38 2007 +0100
11989 Makefile permissions
11991 commit b84289b595731e8851df46e893845cc1322c9b9b
11992 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11993 Date: Tue May 8 14:17:07 2007 -0500
11995 8641hpcn: Fix Makefile after moving pixis to board/freescale.
11997 The OBJTREE != SRCTREE build scenario was broken.
12000 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12001 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12003 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
12004 Author: Michal Simek <monstr@monstr.eu>
12005 Date: Tue May 8 15:57:43 2007 +0200
12007 add: reading special purpose registers
12009 commit 1a50f164beb065f360fbddb76029607d6b099698
12010 Author: Michal Simek <monstr@monstr.eu>
12011 Date: Tue May 8 14:52:52 2007 +0200
12013 add: Microblaze V5 exception handling
12015 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
12016 Author: Michal Simek <monstr@monstr.eu>
12017 Date: Tue May 8 14:39:11 2007 +0200
12019 add: FSL control read and write
12021 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
12022 Author: Piotr Kruszynski <ppk@semihalf.com>
12023 Date: Tue May 8 13:05:44 2007 +0200
12025 [Motion-PRO] Add support for I2C, EEPROM and RTC.
12027 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
12028 Author: Bartlomiej Sieka <tur@semihalf.com>
12029 Date: Tue May 8 10:23:56 2007 +0200
12031 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
12034 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
12035 Author: Bartlomiej Sieka <tur@semihalf.com>
12036 Date: Tue May 8 09:39:12 2007 +0200
12038 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
12039 eliminates networking problems in Linux (timeouts).
12041 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
12042 Author: Bartlomiej Sieka <tur@semihalf.com>
12043 Date: Tue May 8 09:21:57 2007 +0200
12045 [Motion-PRO] Enable Flat Device Tree support and modify default environment
12046 to allow booting of FDT-expecting kernels.
12048 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
12049 Author: Michal Simek <monstr@monstr.eu>
12050 Date: Mon May 7 23:58:31 2007 +0200
12052 new: USE_MSR_INTR support
12054 commit 008861a2f3ef2c062744d733787c7e530a1b8761
12055 Author: Bartlomiej Sieka <tur@semihalf.com>
12056 Date: Mon May 7 22:36:15 2007 +0200
12058 [MPC5xxx] There are networking problems on the Motion-PRO board with
12059 current PHY initalization code (tftp timeouts all the time). This commit
12060 temporarily disables PHY initalization sequence to make the networking
12061 operational, until a fix is found.
12063 commit abca901869c3760b6c5fecb825db6c1d91a78a93
12064 Author: Wolfgang Denk <wd@denx.de>
12065 Date: Mon May 7 22:10:36 2007 +0200
12067 Get rid of duplicated file (see include/configs/sbc8560.h instead)
12069 Signed-off-by: Wolfgang Denk <wd@denx.de>
12071 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
12072 Author: Wolfgang Denk <wd@denx.de>
12073 Date: Mon May 7 22:07:08 2007 +0200
12075 Get rid of duplicated file (see doc/README.SBC8560 instead)
12077 Signed-off-by: Wolfgang Denk <wd@denx.de>
12079 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
12080 Author: Michal Simek <monstr@monstr.eu>
12081 Date: Mon May 7 19:43:10 2007 +0200
12083 fix: read and write MSR - repair number of parameters
12085 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
12086 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12087 Date: Mon May 7 19:42:49 2007 +0200
12089 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
12091 A '3' got cut off in the formatting of the last patch to automatically
12092 change the clock speed of the system clock on sequoia board.
12094 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12095 Signed-off-by: Stefan Roese <sr@denx.de>
12097 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
12098 Author: Michal Simek <monstr@monstr.eu>
12099 Date: Mon May 7 19:33:51 2007 +0200
12101 new: fsl interrupt support
12102 FSL_Has_data is connected to INTC.
12104 commit 792032baa7d625e34c981ab6df521911bd8dc861
12105 Author: Michal Simek <monstr@monstr.eu>
12106 Date: Mon May 7 19:30:12 2007 +0200
12108 fix: interrupt handler
12111 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
12112 Author: Michal Simek <monstr@monstr.eu>
12113 Date: Mon May 7 19:25:08 2007 +0200
12115 fix: remove asm code
12117 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
12118 Author: Michal Simek <monstr@monstr.eu>
12119 Date: Mon May 7 19:12:43 2007 +0200
12121 fix: clean interrupt
12123 commit 42efed6130c8fcf7da881385b5427065d2801757
12124 Author: Michal Simek <monstr@monstr.eu>
12125 Date: Mon May 7 17:22:25 2007 +0200
12127 fix: interrupt handler for multiple sources
12129 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
12130 Author: Michal Simek <monstr@monstr.eu>
12131 Date: Mon May 7 17:11:09 2007 +0200
12133 new: add writing to msr register
12135 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
12136 Author: Markus Klotzbuecher <mk@denx.de>
12137 Date: Mon May 7 16:43:56 2007 +0200
12139 Fix an ancient CHANGELOG conflict
12141 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
12142 Author: Timur Tabi <timur@freescale.com>
12143 Date: Sat May 5 08:12:30 2007 +0200
12145 5xxx: write MAC address to mac-address and local-mac-address
12147 Some device trees have a mac-address property, some have local-mac-address,
12148 and some have both. To support all of these device trees, ftp_cpu_setup()
12149 should write the MAC address to mac-address and local-mac-address, if they
12152 Signed-off-by: Timur Tabi <timur@freescale.com>
12153 Acked-by: Grant Likely <grant.likely@secretlab.ca>
12155 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
12156 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12157 Date: Sun Apr 29 14:01:54 2007 +0200
12159 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
12161 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
12162 message. Use PVR to distinguish between the two variants, and print proper CPU
12165 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12166 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12167 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12169 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
12170 Author: Ladislav Michl <ladis@linux-mips.org>
12171 Date: Wed Apr 25 16:01:26 2007 +0200
12173 [PATCH] simplify silent console
12175 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12176 Acked-by: Stefan Roese <sr@denx.de>
12178 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
12179 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12180 Date: Mon Apr 23 15:30:39 2007 +0200
12182 [PATCH] Avoid assigning PCI resources from zero address
12184 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
12185 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
12186 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
12187 sentence about "0" being considered an invalid address) -- so, use a reasonable
12188 starting value of 0x1000 (that's what the most Linux archs are using).
12190 Alternatively, one might have fixed the calls to pci_set_region() individually
12191 (some code even seems to have taken care of this issue) but that would have
12192 been a lot more work. :-)
12194 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12195 Acked-by: Stefan Roese <sr@denx.de>
12197 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
12198 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12199 Date: Mon Apr 23 14:00:11 2007 +0200
12201 [patch] setenv(...) can delete environmentalvariables
12203 update setenv() function so that entering a NULL value for the
12204 variable's value will delete the environmental variable
12206 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12207 Acked-by: Stefan Roese <sr@denx.de>
12209 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
12210 Author: Mike Frysinger <vapier@gentoo.org>
12211 Date: Mon Apr 23 13:54:24 2007 +0200
12213 [patch] use unsigned char in smc91111 driver for mac
12215 the v_mac variable in the smc91111 driver is declared as a signed char ...
12216 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
12217 because when it gets printed out, you get a display like:
12218 0xFFFFFFE0 and that's no good
12220 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12222 commit ffc50f9bb194343c6303517a517708457a5eb6b8
12223 Author: Michal Simek <monstr@monstr.eu>
12224 Date: Sat May 5 18:54:42 2007 +0200
12226 new: FSL and MSR support #2
12228 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
12229 Author: Michal Simek <monstr@monstr.eu>
12230 Date: Sat May 5 18:27:16 2007 +0200
12232 new: FSL and MSR support
12234 commit 2f15278c2eb911c668b4fe562130b78cf554d139
12235 Author: Wolfgang Denk <wd@denx.de>
12236 Date: Sat May 5 18:23:11 2007 +0200
12238 Coding stylke cleanup; update CHANGELOG.
12240 Signed-off-by: Wolfgang Denk <wd@denx.de>
12242 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
12243 Author: Wolfgang Denk <wd@denx.de>
12244 Date: Sat May 5 18:05:02 2007 +0200
12246 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
12248 Signed-off-by: Wolfgang Denk <wd@denx.de>
12250 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
12251 Author: Wolfgang Denk <wd@denx.de>
12252 Date: Sat May 5 17:15:50 2007 +0200
12254 Make "file" command happy with some config.mk files; update CHANGELOG
12256 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
12257 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12258 Date: Sat May 5 08:32:14 2007 +0200
12260 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
12262 The AMCC Secquoia board has been changed in a new revision from using a
12263 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
12264 indicates the difference. This patch reads that bit and uses the correct
12265 clock speed for the board. This code is backward compatable will all
12266 prior boards. All prior boards will be read as 33.000.
12268 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12269 Signed-off-by: Stefan Roese <sr@denx.de>
12271 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
12272 Author: Stefan Roese <sr@denx.de>
12273 Date: Sat May 5 08:29:01 2007 +0200
12275 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
12277 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
12278 for the 4k NAND boot image so define bus_frequency to 133MHz here
12279 which is save for the refresh counter setup.
12281 Signed-off-by: Stefan Roese <sr@denx.de>
12283 commit 2f550ab976405300f5b07bf2890800840d0aa05f
12284 Author: Timur Tabi <timur@freescale.com>
12285 Date: Sat May 5 08:12:30 2007 +0200
12287 5xxx: write MAC address to mac-address and local-mac-address
12289 Some device trees have a mac-address property, some have local-mac-address,
12290 and some have both. To support all of these device trees, ftp_cpu_setup()
12291 should write the MAC address to mac-address and local-mac-address, if they
12294 Signed-off-by: Timur Tabi <timur@freescale.com>
12295 Acked-by: Grant Likely <grant.likely@secretlab.ca>
12297 commit a79886590593ba1d667c840caa4940c61639f18f
12298 Author: Thomas Knobloch <knobloch@siemens.com>
12299 Date: Sat May 5 07:04:42 2007 +0200
12301 NAND: Wrong calculation of page number in nand_block_bad()
12303 In case that there is no memory based bad block table available the
12304 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
12305 nand_block_bad() directly. When parameter 'getchip' is set to zero,
12306 nand_block_bad() will not right shift the offset to calculate the
12307 correct page number.
12309 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
12310 Signed-off-by: Stefan Roese <sr@denx.de>
12312 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
12313 Author: Wolfgang Denk <wd@denx.de>
12314 Date: Fri May 4 10:02:33 2007 +0200
12316 Fix initrd length corruption in bootm command.
12318 When using FDT Images, the length of an inital ramdisk was
12319 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
12321 Patches by Timur Tabi & Johns Daniel.
12323 Signed-off-by: Wolfgang Denk <wd@denx.de>
12325 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
12326 Author: Kim Phillips <kim.phillips@freescale.com>
12327 Date: Thu May 3 19:43:52 2007 -0500
12329 mpc83xx: fix trivial error in MAKEALL
12331 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12333 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
12334 Author: Wolfgang Denk <wd@denx.de>
12335 Date: Thu May 3 16:34:41 2007 +0200
12337 Update board configuration for STX GP3SSA board:
12339 Enable hush shell, environment in flash rather in EEPROM,
12340 more user-friendly default environment, etc.
12341 The simple EEPROM environment can be selected easily in the board
12344 Signed-off-by: Wolfgang Denk <wd@denx.de>
12346 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
12347 Author: Wolfgang Denk <wd@denx.de>
12348 Date: Tue Apr 24 14:37:49 2007 +0200
12350 Cleanup STX GP3SSA code; fix build and compile problems.
12352 commit 35171dc04e028ecacc23ad916a66295472555dbf
12353 Author: Dan Malek <dan@embeddedalley.com>
12354 Date: Fri Jan 5 09:15:34 2007 +0100
12356 Add support for STX GP3SSA (stxssa) Board
12358 Signed-off-by Dan Malek, <dan@embeddedalley.com>
12360 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
12361 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12362 Date: Wed May 2 13:31:53 2007 +0200
12364 macb: Don't restart autonegotiation if we already have link
12366 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
12367 link is already up.
12369 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12371 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
12372 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12373 Date: Wed May 2 13:22:38 2007 +0200
12375 macb: Introduce a few barriers when dealing with DMA descriptors
12377 There were a few theoretical possibilities that the compiler might
12378 optimize away DMA descriptor reads and/or writes and thus cause
12379 synchronization problems with the hardware. Insert barriers where
12380 we depend on reads/writes actually hitting memory.
12382 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12384 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
12385 Author: Andy Fleming <afleming@freescale.com>
12386 Date: Sat Feb 24 01:08:13 2007 -0600
12388 Cleaned up some 85xx PCI bugs
12390 * Cleaned up the CDS PCI Config Tables and added NULL entries to
12392 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
12393 * Fixed 85xx PCI code to assign powar region sizes based on the
12394 config values (rather than hard-coding them)
12395 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
12397 Signed-off-by: Andy Fleming <afleming@freescale.com>
12399 commit 6743105988fc44d5b0d30388c790607835aae7a6
12400 Author: Andy Fleming <afleming@freescale.com>
12401 Date: Mon Apr 23 02:54:25 2007 -0500
12403 Add support for the 8568 MDS board
12405 This included some changes to common files:
12406 * Add 8568 processor SVR to various places
12407 * Add support for setting the qe bus-frequency value in the dts
12408 * Add the 8568MDS target to the Makefile
12410 Signed-off-by: Andy Fleming <afleming@freescale.com>
12412 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
12413 Author: David Updegraff <dave@cray.com>
12414 Date: Fri Apr 20 14:34:48 2007 -0500
12416 Add support for treating unknown PHYs as generic PHYs.
12418 When bringing up u-boot on new boards, PHY support sometimes gets
12419 neglected. Most PHYs don't really need any special support,
12420 though. By adding a generic entry that always matches if nothing
12421 else does, we can provide support for "unsupported" PHYs for the
12424 The generic PHY driver supports most PHYs, including gigabit.
12426 Signed-off-by: David Updegraff <dave@cray.com>
12427 Signed-off-by: Andy Fleming <afleming@freescale.com>
12429 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
12430 Author: James Yang <James.Yang@freescale.com>
12431 Date: Wed Feb 7 15:28:04 2007 -0600
12433 Conditionalize 8641 Rev1.0 MCM workarounds
12435 Signed-off-by: James Yang <James.Yang@freescale.com>
12436 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12438 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
12439 Author: Timur Tabi <timur@freescale.com>
12440 Date: Mon Apr 30 13:59:50 2007 -0500
12442 Fix memory initialization on MPC8349E-mITX
12444 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
12445 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
12446 on some ITX boards, notably those with a revision 3.1 CPU.
12448 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
12449 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
12451 Signed-off-by: Timur Tabi <timur@freescale.com>
12452 Acked-by: Michael Benedict <MBenedict@twacs.com>
12453 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12455 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
12456 Author: Kim Phillips <kim.phillips@freescale.com>
12457 Date: Mon Apr 30 15:26:21 2007 -0500
12459 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
12461 and fix CPU: to align with Board: display text.
12463 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12465 commit c1ab82669d9525998c34e802a12cad662723f22a
12466 Author: James Yang <James.Yang@freescale.com>
12467 Date: Fri Mar 16 13:02:53 2007 -0500
12469 Rewrote picos_to_clk() to avoid rounding errors.
12470 Clarified that conversion is to DRAM clocks rather than platform clocks.
12471 Made function static to spd_sdram.c.
12473 Signed-off-by: James Yang <James.Yang@freescale.com>
12474 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12476 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
12477 Author: Stefan Roese <sr@denx.de>
12478 Date: Sun Apr 29 14:13:01 2007 +0200
12480 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
12482 Signed-off-by: Stefan Roese <sr@denx.de>
12484 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
12485 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12486 Date: Sun Apr 29 14:01:54 2007 +0200
12488 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
12490 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
12491 message. Use PVR to distinguish between the two variants, and print proper CPU
12494 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12495 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12496 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12498 commit 5c5d3242935cf3543af01142627494434834cf98
12499 Author: Kim Phillips <kim.phillips@freescale.com>
12500 Date: Wed Apr 25 12:34:38 2007 -0500
12502 mpc83xx: minor fixups for 8313rdb introduction
12504 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
12505 Author: Ladislav Michl <ladis@linux-mips.org>
12506 Date: Wed Apr 25 16:01:26 2007 +0200
12508 [PATCH] simplify silent console
12510 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12511 Acked-by: Stefan Roese <sr@denx.de>
12513 commit 144876a380f5756f57412caf74c1d6dc201dd796
12514 Author: Michal Simek <monstr@monstr.eu>
12515 Date: Tue Apr 24 23:01:02 2007 +0200
12517 [PATCH] MTD partition support, JFFS2 support
12519 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
12520 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12521 Date: Tue Apr 24 14:03:45 2007 +0200
12523 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
12525 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12527 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
12528 Author: Andy Fleming <afleming@freescale.com>
12529 Date: Mon Apr 23 02:37:47 2007 -0500
12531 Reworked 85xx speed detection code
12533 Changed the code to read the registers and calculate the clock
12534 rates, rather than using a "switch" statement.
12536 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
12538 Signed-off-by: Andy Fleming <afleming@freescale.com>
12540 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
12541 Author: Andy Fleming <afleming@freescale.com>
12542 Date: Mon Apr 23 02:24:28 2007 -0500
12544 Enable 8544 support
12546 * Add support to the Makefile
12547 * Add 8544 configuration support to the tsec driver
12548 * Add 8544 SVR numbers to processor.h
12550 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12551 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12553 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
12554 Author: Andy Fleming <afleming@freescale.com>
12555 Date: Fri Feb 23 17:12:25 2007 -0600
12557 Support 1G size on 8548
12559 e500v2 and newer cores support 1G page sizes.
12561 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12562 Signed-off-by: Andy Fleming <afleming@freescale.com>
12564 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
12565 Author: Andy Fleming <afleming@freescale.com>
12566 Date: Fri Feb 23 17:11:16 2007 -0600
12568 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
12570 The other pagesz constants use one letter to specify order of
12571 magnitude. Also change the one reference to it in mpc8548cds/init.S
12573 Signed-off-by: Andy Fleming <afleming@freescale.com>
12575 commit 1f9a318cea14272edd10d63739e2d326c90f430e
12576 Author: Andy Fleming <afleming@freescale.com>
12577 Date: Fri Feb 23 16:28:46 2007 -0600
12579 Only set ddrioovcr for 8548 rev1.
12581 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12582 Signed-off-by: Andy Fleming <afleming@freescale.com>
12584 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
12585 Author: Andy Fleming <afleming@freescale.com>
12586 Date: Sat Feb 24 01:16:45 2007 -0600
12588 Tweak DDR ECC error counter
12590 Enable single-bit error counter when memory was cleared by ddr controller.
12592 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12593 Signed-off-by: Andy Fleming <afleming@freescale.com>
12595 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
12596 Author: Timur Tabi <timur@freescale.com>
12597 Date: Mon Feb 12 13:34:55 2007 -0600
12599 85xx: write MAC address to mac-address and local-mac-address
12601 Some device trees have a mac-address property, some have local-mac-address,
12602 and some have both. To support all of these device trees, ftp_cpu_setup()
12603 should write the MAC address to mac-address and local-mac-address, if they
12606 Signed-off-by: Timur Tabi <timur@freescale.com>
12608 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
12609 Author: Andy Fleming <afleming@freescale.com>
12610 Date: Mon Apr 23 01:44:44 2007 -0500
12612 Some 85xx cpu cleanups
12614 * Cleaned up the TSR[WIS] clearing
12615 * Cleaned up DMA initialization
12617 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12618 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12619 Acked-by: Andy Fleming <afleming@freescale.com>
12621 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
12622 Author: Andy Fleming <afleming@freescale.com>
12623 Date: Mon Apr 23 01:32:22 2007 -0500
12625 Add cpu support for the 8544
12627 Recognize new SVR values, and add a few register definitions
12629 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12630 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12631 Acked-by: Andy Fleming <afleming@freescale.com>
12633 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
12634 Author: Jon Loeliger <jdl@freescale.com>
12635 Date: Wed Apr 11 16:51:02 2007 -0500
12637 Add MPC8544DS basic port board files.
12639 Add board port under new board/freescale directory
12640 structure and reuse existing PIXIS FPGA support there.
12642 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12643 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12645 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
12646 Author: Jon Loeliger <jdl@freescale.com>
12647 Date: Wed Apr 11 16:50:57 2007 -0500
12649 Add MPC8544DS main configuration file.
12651 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12652 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12654 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
12655 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12656 Date: Wed Dec 27 22:07:15 2006 +0300
12658 Fix PCI I/O space mapping on Freescale MPC85x0ADS
12660 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
12661 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
12662 describing the local address window used for the PCI I/O space accesses -- fix
12663 this and carry over the necessary changes into the MPC8560ADS code since the
12664 PCI I/O space mapping was also broken for this board (by the earlier commit
12665 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
12666 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
12668 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12670 board/mpc8540ads/init.S | 4 ++--
12671 board/mpc8560ads/init.S | 4 ++--
12672 include/configs/MPC8540ADS.h | 5 ++---
12673 include/configs/MPC8541CDS.h | 2 +-
12674 include/configs/MPC8548CDS.h | 2 +-
12675 include/configs/MPC8560ADS.h | 8 ++++----
12676 6 files changed, 12 insertions(+), 13 deletions(-)
12678 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
12679 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12680 Date: Tue Dec 5 16:42:30 2006 +0800
12682 u-boot: Fix e500 v2 core reset bug
12684 The following patch fixes the e500 v2 core reset bug.
12685 For e500 v2 core, a new reset control register is added to reset the
12688 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12690 commit 63247a5acd58032e6cf33f525bc3923b467bac88
12691 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12692 Date: Wed Dec 20 11:01:00 2006 +0800
12694 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
12696 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
12697 entry number to control the loop. This can reduce the potential risk
12698 for the 85xx processor increasing its TLB adn LAW entry number.
12700 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
12701 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12703 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
12704 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12705 Date: Mon Dec 18 17:01:04 2006 +0800
12707 u-boot: Fix the 85xxcds tsec bug
12709 Fix the 85xxcds tsec bug.
12710 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
12712 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12714 commit 7337b237ffc4aaf1b9467024fe472a880d852598
12715 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12716 Date: Fri Dec 15 14:43:31 2006 +0800
12718 u-boot: Fix CPU2 errata on MPC8548CDS board
12720 This patch apply workaround of CPU2 errata on MPC8548CDS board.
12722 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
12724 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
12725 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
12726 Date: Mon Dec 18 16:25:15 2006 +0800
12728 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
12730 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
12732 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
12734 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
12735 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12736 Date: Thu Dec 14 14:14:55 2006 +0800
12738 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
12740 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
12742 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12744 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
12745 Author: Scott Wood <scottwood@freescale.com>
12746 Date: Mon Apr 16 14:54:15 2007 -0500
12748 mpc83xx: Add MPC8313ERDB support.
12750 Signed-off-by: Scott Wood <scottwood@freescale.com>
12752 commit 49ea3b6eafe606285ae4d5c378026153dde53200
12753 Author: Scott Wood <scottwood@freescale.com>
12754 Date: Mon Apr 16 14:34:21 2007 -0500
12756 mpc83xx: Add generic PCI setup code.
12758 Board code can now request the generic setup code rather than having to
12759 copy-and-paste it for themselves. Boards should be converted to use this
12760 once they're tested with it.
12762 Signed-off-by: Scott Wood <scottwood@freescale.com>
12764 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
12765 Author: Scott Wood <scottwood@freescale.com>
12766 Date: Mon Apr 16 14:34:19 2007 -0500
12768 mpc83xx: Add 831x support to speed.c.
12770 Signed-off-by: Scott Wood <scottwood@freescale.com>
12772 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
12773 Author: Scott Wood <scottwood@freescale.com>
12774 Date: Mon Apr 16 14:34:18 2007 -0500
12776 mpc83xx: Add 831x support to global_data.h
12778 Signed-off-by: Scott Wood <scottwood@freescale.com>
12780 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
12781 Author: Scott Wood <scottwood@freescale.com>
12782 Date: Mon Apr 16 14:34:16 2007 -0500
12784 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
12786 Rather than misleadingly define PVR_83xx as the specific type of 83xx
12787 being built for, the PVR of each core revision is defined. checkcpu() now
12788 prints the core that it detects, rather than aborting if it doesn't find
12789 what it thinks it wants.
12791 Signed-off-by: Scott Wood <scottwood@freescale.com>
12793 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
12794 Author: Scott Wood <scottwood@freescale.com>
12795 Date: Mon Apr 16 14:34:15 2007 -0500
12797 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
12799 Signed-off-by: Scott Wood <scottwood@freescale.com>
12801 commit d87c57b201b4572d16f1b642998faa00c9912b16
12802 Author: Scott Wood <scottwood@freescale.com>
12803 Date: Mon Apr 16 14:31:55 2007 -0500
12805 mpc83xx: Add register definitions for MPC831x.
12807 Signed-off-by: Scott Wood <scottwood@freescale.com>
12809 commit 7fc4c71a143be8666d70803fb25ae60379c95622
12810 Author: Stefan Roese <sr@denx.de>
12811 Date: Mon Apr 23 15:39:59 2007 +0200
12815 Signed-off-by: Stefan Roese <sr@denx.de>
12817 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
12818 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12819 Date: Mon Apr 23 15:30:39 2007 +0200
12821 [PATCH] Avoid assigning PCI resources from zero address
12823 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
12824 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
12825 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
12826 sentence about "0" being considered an invalid address) -- so, use a reasonable
12827 starting value of 0x1000 (that's what the most Linux archs are using).
12829 Alternatively, one might have fixed the calls to pci_set_region() individually
12830 (some code even seems to have taken care of this issue) but that would have
12831 been a lot more work. :-)
12833 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12834 Acked-by: Stefan Roese <sr@denx.de>
12836 commit afb903a2eb9436baa9270ccc0c27082d86497d89
12837 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12838 Date: Mon Apr 23 14:00:11 2007 +0200
12840 [patch] setenv(...) can delete environmentalvariables
12842 update setenv() function so that entering a NULL value for the
12843 variable's value will delete the environmental variable
12845 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12846 Acked-by: Stefan Roese <sr@denx.de>
12848 commit 36f104e5caa747d568eff26b369565af57c2ffa6
12849 Author: Mike Frysinger <vapier@gentoo.org>
12850 Date: Mon Apr 23 13:54:24 2007 +0200
12852 [patch] use unsigned char in smc91111 driver for mac
12854 the v_mac variable in the smc91111 driver is declared as a signed char ...
12855 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
12856 because when it gets printed out, you get a display like:
12857 0xFFFFFFE0 and that's no good
12859 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12861 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
12862 Author: Rodolfo Giometti <giometti@enneenne.com>
12863 Date: Mon Apr 23 13:10:52 2007 +0200
12865 USB: (Another) delay for crappy USB keys.
12867 Some USB keys are slow in giving back an answer when the Root HUB
12868 enables power lines.
12870 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
12872 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
12873 Author: Stefan Roese <sr@denx.de>
12874 Date: Mon Apr 23 12:00:22 2007 +0200
12876 Remove BOARDLIBS usage completely
12878 Signed-off-by: Stefan Roese <sr@denx.de>
12880 commit 32556443840f127170e4baa8bdd5b567039f6c36
12881 Author: Michal Simek <monstr@monstr.eu>
12882 Date: Sat Apr 21 21:07:22 2007 +0200
12884 [PATCH] SystemACE support for Microblaze
12886 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
12887 Author: Michal Simek <monstr@monstr.eu>
12888 Date: Sat Apr 21 21:02:40 2007 +0200
12890 16bit read/write little endian
12892 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
12893 Author: Michal Simek <monstr@monstr.eu>
12894 Date: Sat Apr 21 20:53:31 2007 +0200
12896 Change ML401 parameters - Xilinx BSP
12898 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
12899 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12900 Date: Wed Feb 28 05:37:29 2007 -0600
12902 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
12904 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12906 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
12907 Author: Zhang Wei <wei.zhang@freescale.com>
12908 Date: Fri Jan 19 10:42:37 2007 +0800
12910 Enable LAWs for MPC8641 PCI-Ex2.
12912 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12913 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12915 commit bd7851ce1e1f140665b520026abf1042968b1102
12916 Author: Jon Loeliger <jdl@freescale.com>
12917 Date: Fri Apr 20 14:12:26 2007 -0500
12919 mpc86xx; Write MAC address to mac-address and local-mac-address
12921 Some device trees have a mac-address property, some have local-mac-address,
12922 and some have both. To support all of these device trees, ftp_cpu_setup()
12923 should write the MAC address to mac-address and local-mac-address, if they
12926 Signed-off-by: Timur Tabi <timur@freescale.com>
12927 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12929 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
12930 Author: Jon Loeliger <jdl@freescale.com>
12931 Date: Fri Apr 20 14:11:38 2007 -0500
12933 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
12935 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12936 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12938 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
12939 Author: Wolfgang Denk <wd@denx.de>
12940 Date: Fri Apr 20 17:43:28 2007 +0200
12942 Cleanup compiler warnings, update CHANGELOG
12944 Signed-off-by: Wolfgang Denk <wd@denx.de>
12946 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
12947 Author: Detlev Zundel <dzu@denx.de>
12948 Date: Fri Apr 20 12:01:47 2007 +0200
12950 Fix breakage of NC650 board with respect to nand support.
12952 Signed-off-by: Detlev Zundel <dzu@denx.de>
12954 commit 39f23cd90947639ac278a18ff277ec786b5ac167
12955 Author: Domen Puncer <domen.puncer@telargo.com>
12956 Date: Fri Apr 20 11:13:16 2007 +0200
12958 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
12960 G2 core reference manual says decrementer and time base
12961 are decreasing/increasing once every 4 bus clock cycles.
12962 Lets fix it, so time in Linux won't run twice as fast
12964 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
12965 Acked-by: Grant Likely <grant.likely@secretlab.ca>
12967 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
12968 Author: Gerald Van Baren <vanbaren@cideas.com>
12969 Date: Thu Apr 19 23:14:39 2007 -0400
12971 Fix serious pointer bug with bootm and reserve map.
12973 What was suppose to be a stack variable was declared as a pointer,
12974 overwriting random memory.
12975 Also moved the libfdt.a requirement into the main Makefile. That is
12978 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
12979 Author: Stefan Roese <sr@denx.de>
12980 Date: Thu Apr 19 09:53:52 2007 +0200
12982 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
12984 Previous versions used full wait states for the chip select #1 which
12985 is connected to the Xilinix SystemACE controller on the AMCC Katmai
12986 evaluation board. This leads to really slow access and therefore low
12987 performance. This patch now sets up the chip select a lot faster
12988 resulting in much better read/write performance of the Linux driver.
12990 Signed-off-by: Stefan Roese <sr@denx.de>
12992 commit 37837828d89084879bee2f2b8c7c68d4695940df
12993 Author: Wolfgang Denk <wd@denx.de>
12994 Date: Wed Apr 18 17:49:29 2007 +0200
12996 Clenaup, update CHANGELOG
12998 Signed-off-by: Wolfgang Denk <wd@denx.de>
13000 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
13001 Author: Wolfgang Denk <wd@denx.de>
13002 Date: Wed Apr 18 17:20:58 2007 +0200
13006 Signed-off-by: Wolfgang Denk <wd@denx.de>
13008 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
13009 Author: Wolfgang Denk <wd@denx.de>
13010 Date: Wed Apr 18 17:07:26 2007 +0200
13012 Cleanup, update CHANGELOG
13014 Sigend-off-by: Wolfgang Denk <wd@denx.de>
13016 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
13017 Author: Wolfgang Denk <wd@denx.de>
13018 Date: Wed Apr 18 16:17:46 2007 +0200
13022 commit ad4eb555671d97f96dc56eab55103b1f86874b01
13023 Author: Wolfgang Denk <wd@denx.de>
13024 Date: Wed Apr 18 14:30:39 2007 +0200
13026 MCC200 board: remove warning which is obsolete after PSoC firmware changes
13028 Signed-off-by: Wolfgang Denk <wd@denx.de>
13030 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
13031 Author: Domen Puncer <domen.puncer@telargo.com>
13032 Date: Wed Apr 18 12:11:05 2007 +0200
13034 [PATCH] icecube/lite5200b: document wakeup from low-power support
13036 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
13038 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
13039 Author: Stefan Roese <sr@denx.de>
13040 Date: Wed Apr 18 12:07:47 2007 +0200
13042 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
13044 Signed-off-by: Stefan Roese <sr@denx.de>
13046 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
13047 Author: Stefan Roese <sr@denx.de>
13048 Date: Wed Apr 18 12:05:59 2007 +0200
13050 ppc4xx: Add output for bootrom location to 405EZ ports
13052 Now 405EZ ports also show upon bootup from which boot device
13053 they are configured to boot:
13055 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
13057 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
13058 Bootstrap Option E - Boot ROM Location EBC (32 bits)
13059 16 kB I-Cache 16 kB D-Cache
13060 Board: Acadia - AMCC PPC405EZ Evaluation Board
13062 Signed-off-by: Stefan Roese <sr@denx.de>
13064 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
13065 Author: Peter Pearse <peter.pearse@arm.com>
13066 Date: Tue Apr 17 13:30:33 2007 +0100
13068 Move ppearse to ARM board list
13069 Add Konstantin Kletschke for scb9328.
13070 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
13072 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
13073 Author: Domen Puncer <domen.puncer@telargo.com>
13074 Date: Mon Apr 16 14:00:13 2007 +0200
13076 [PATCH] icecube/lite5200b: wakeup from low-power support
13078 U-Boot part of Lite5200b low power mode support.
13079 Puts SDRAM out of self-refresh and transfers control to
13080 address saved at physical 0x0.
13082 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
13083 Acked-by: Grant Likely <grant.likely@secretlab.ca>
13085 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
13086 Author: Gerald Van Baren <vanbaren@cideas.com>
13087 Date: Sun Apr 15 13:54:26 2007 -0400
13089 Fix the ft_cpu_setup() property settings.
13091 Use "setter" functions instead of flags, cleaner and more flexible.
13092 It also fixes the problem noted by Timur Tabi that the ethernet MAC
13093 addresses were all being set incorrectly to the same MAC address.
13095 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
13096 Author: Gerald Van Baren <vanbaren@cideas.com>
13097 Date: Sat Apr 14 22:51:24 2007 -0400
13099 Improve the bootm command for CONFIG_OF_LIBFDT
13101 In bootm, create the "/chosen" node only if it doesn't already exist
13102 (better matches the previous behavior).
13103 Update for proper reserved memory map handling for initrd.
13105 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
13106 Author: Gerald Van Baren <vanbaren@cideas.com>
13107 Date: Sat Apr 14 22:46:41 2007 -0400
13109 Add some utilities to manipulate the reserved memory map.
13111 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
13112 Author: Wolfgang Denk <wd@denx.de>
13113 Date: Sat Apr 14 21:16:54 2007 +0200
13117 commit 8e6875183cdca91c134408d119d4abcd48ef6856
13118 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13119 Date: Sun Dec 17 18:56:46 2006 +0100
13121 AVR32: Enable MMC support
13123 Set up the portmux for the MMC interface and enable the MMC driver
13124 along with support for DOS partitions, ext2 and FAT filesystems.
13126 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13128 commit fc26c97bb6df41b4a95662c34054fe912387bf38
13129 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13130 Date: Fri Jan 20 10:03:53 2006 +0100
13134 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
13136 The AT91 ARM-based CPUs use basically the same hardware, so it should
13137 be possible to share this driver, but no effort has been made so far.
13139 Hardware documentation can be found in the AT32AP7000 data sheet,
13140 which can be downloaded from
13142 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
13144 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13146 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
13147 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13148 Date: Sun Dec 17 18:55:37 2006 +0100
13150 AVR32: Add clk and gpio infrastructure for mmci
13152 Implement functions for configuring the mmci pins, as well as
13153 functions for getting the clock rate of the mmci controller.
13155 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13157 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
13158 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13159 Date: Sun Dec 17 18:53:56 2006 +0100
13161 Enable partition support with MMC
13163 Include implementations of init_part() and get_partition_info() when
13166 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13168 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
13169 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13170 Date: Sun Dec 17 17:14:30 2006 +0100
13172 AVR32: Enable networking
13174 Implement MACB initialization for AVR32 and ATSTK1000, and turn
13175 everything on, including the MACB driver.
13177 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13179 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
13180 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13181 Date: Fri Jan 20 10:03:34 2006 +0100
13183 Atmel MACB ethernet driver
13185 Driver for the Atmel MACB on-chip ethernet controller.
13187 This driver has been tested on the ATSTK1000 board with a AT32AP7000
13188 CPU. It should probably work on AT91SAM926x as well with some minor
13191 Hardware documentation can be found in the AT32AP7000 data sheet,
13192 which can be downloaded from
13194 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
13196 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13198 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
13199 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13200 Date: Sun Dec 17 16:56:14 2006 +0100
13202 AVR32: Add clk and gpio infrastructure for macb0 and macb1
13204 Implement functions for configuring the macb0 and macb1 pins, as
13205 well as functions for getting the clock rate of the various
13206 busses the macb ethernet controllers are connected to.
13208 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13210 commit d5acb95b16a0a74c643524342c3437e765426d05
13211 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13212 Date: Sun Dec 17 15:39:15 2006 +0100
13214 AVR32: Implement simple DMA memory allocator
13216 Implement dma_alloc_coherent() which returns cache-aligned
13217 uncacheable memory.
13219 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13221 commit 91975b0fea773c9e681fea8cf3349669f27685ee
13222 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13223 Date: Sun Dec 17 15:46:02 2006 +0100
13225 Import <linux/mii.h> from the Linux kernel
13227 Instead of creating yet another set of MII register definitions
13228 in the macb driver, here's a complete set of definitions for everyone
13231 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13233 commit 1b804b229556a4d862da93c0ec94e79419364b2c
13234 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13235 Date: Wed Mar 21 19:47:36 2007 +0100
13237 AVR32: Include more commands for ATSTK1000
13239 Include the imi, imls and jffs commands sets by default on ATSTK1000.
13240 Also define CONFIG_BOOTARGS to something more useful, define
13241 CONFIG_BOOTCOMMAND and enable autoboot by default.
13243 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13245 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
13246 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13247 Date: Wed Mar 21 19:44:48 2007 +0100
13249 AVR32: Provide a definition of struct stat
13251 Copy the definition of struct stat from the Linux kernel.
13253 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13255 commit 12f099c08167a7a51aeee623bc16dafd0841271c
13256 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13257 Date: Sun Dec 17 14:46:06 2006 +0100
13259 AVR32: Use initdram() instead of board_init_memories()
13261 Conform to the "standard" interface and use initdram() instead of
13262 board_init_memories() on AVR32. This enables us to get rid of the
13263 sdram_size member of the global_data struct as well.
13265 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13267 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
13268 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13269 Date: Mon Nov 20 15:53:10 2006 +0100
13271 AVR32: Relocate u-boot to SDRAM
13273 Relocate the u-boot image into SDRAM like everyone else does. This
13274 means that we can handle much larger .data and .bss than we used to.
13276 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13278 commit df548d3c3e2bbc40258713167859ffc2ce99a900
13279 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13280 Date: Sun Nov 19 18:06:53 2006 +0100
13282 AVR32: Resource management rewrite
13284 Rewrite the resource management code (i.e. I/O memory, clock gating,
13285 gpio) so it doesn't depend on any global state. This is necessary
13286 because this code is heavily used before relocation to RAM, so we
13287 can't write to any global variables.
13289 As an added bonus, this makes u-boot's memory footprint a bit smaller,
13290 although some functionality has been left out; all clocks are enabled
13291 all the time, and there's no checking for gpio line conflicts.
13293 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13295 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
13296 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13297 Date: Sat Nov 18 18:01:13 2006 +0100
13299 AVR32: Clean up memory-map.h for at32ap7000
13301 Convert spaces to tabs (must have missed this one last time around),
13302 sort the entries by address and group them together by bus
13305 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13307 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
13308 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13309 Date: Sat Nov 18 17:32:31 2006 +0100
13311 AVR32: Build position-independent u-boot
13313 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
13314 position independent. This will make relocation a lot easier.
13316 -mno-init-got means that gcc shouldn't emit code to load the GOT
13317 address into r6 in every function prologue. We do it once and for
13318 all in the early startup assembly code, so enabling this option
13319 makes u-boot a bit faster and smaller.
13321 The assembly parts have always been position-independent, so no code
13322 changes should be necessary.
13324 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13326 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
13327 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13328 Date: Sat Nov 18 17:24:31 2006 +0100
13330 AVR32: Use avr32-linux- cross-compilation prefix by default
13332 It doesn't really matter which toolchain you use to compile u-boot,
13333 but the avr32-linux one is probably what most people have installed.
13335 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13337 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
13338 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13339 Date: Sat Nov 18 17:15:30 2006 +0100
13341 AVR32: Split start_u_boot into board_init_f and board_init_r
13343 Split the avr32 initialization code into a function to run before
13344 relocation, board_init_f and a function to run after relocation,
13345 board_init_r. For now, board_init_f simply calls board_init_r
13348 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13350 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
13351 Author: Heiko Schocher <hs@pollux.denx.de>
13352 Date: Sat Apr 14 05:26:48 2007 +0200
13354 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
13355 clear the Display after reset.
13357 Signed-off-by: Heiko Schocher <hs@denx.de>
13359 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
13360 Author: Denis Peter <d.peter@mpl.ch>
13361 Date: Fri Apr 13 09:13:33 2007 +0200
13363 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
13365 Fix bug introduced by "Fix get_partition_info() parameter error in all
13366 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
13367 to use diskboot or scsiboot form another device than 0.
13369 Signed-off-by: Denis Peter <d.peter@mpl.ch>
13371 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
13372 Author: Greg Lopp <lopp@pobox.com>
13373 Date: Fri Apr 13 08:02:24 2007 +0200
13375 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
13377 Signed-of-by: Greg Lopp <lopp@pobox.com>
13378 Acked-by: Grant Likely <grant.likely@secretlab.ca>
13380 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
13381 Author: Xie Xiaobo <r63061@freescale.com>
13382 Date: Fri Mar 9 19:08:25 2007 +0800
13384 Fix two bugs for MPC83xx DDR2 controller SPD Init
13386 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
13387 the first bug is that the picos_to_clk routine introduces a huge
13388 rounding error in 83xx.
13389 the second bug is that the mode register write recovery field is
13390 tWR-1, not tWR >> 1.
13392 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
13393 Author: Jeffrey Mann <mannj@embeddedplanet.com>
13394 Date: Thu Apr 12 14:15:59 2007 +0200
13396 ppc4xx: Fix i2c divisor calcularion for PPC4xx
13398 This patch fixes changes the i2c_init(...) function to use the function
13399 get_OPB_freq() rather than calculating the OPB speed by
13400 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
13401 specific per processor. The prior method was not and so was calculating
13402 the wrong speed for some PPC4xx processors.
13404 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
13405 Signed-off-by: Stefan Roese <sr@denx.de>
13407 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
13408 Author: Wolfgang Denk <wd@denx.de>
13409 Date: Wed Apr 11 17:25:01 2007 +0200
13413 Signed-off-by: Wolfgang Denk <wd@denx.de>
13415 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
13416 Author: Wolfgang Denk <wd@denx.de>
13417 Date: Wed Apr 11 17:22:55 2007 +0200
13419 Update for SC3 board
13421 * Make IDE timeout configurable through ide_reset_timeout variable.
13422 * Use Newline as "password" string
13423 * Use just a single partition in NAND flash
13425 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
13426 Author: Haiying Wang <haiying.wang@freescale.com>
13427 Date: Mon Jan 22 12:37:30 2007 -0600
13429 Add PIXIS FPGA support for MPC8641HPCN board.
13431 Move the 8641HPCN's PIXIS code to the new directory
13432 board/freescale/common/ as it will be shared by
13433 future boards not in the same processor family.
13435 Write a "pixis_reset" command that utilizes the FPGA
13436 reset sequencer to support alternate soft-reset options
13437 such as using the "alternate" flash bank, enabling
13438 the watch dog, or choosing different CPU frequencies.
13440 Add documentation for the pixis_reset to README.mpc8641hpcn.
13442 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
13443 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13445 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
13446 Author: Gerald Van Baren <vanbaren@cideas.com>
13447 Date: Fri Apr 6 14:19:43 2007 -0400
13449 Moved fdt command support code to fdt_support.c
13451 ...in preparation for improving the bootm command's handling of fdt blobs.
13452 Also cleaned up some coding sloppiness.
13454 commit 6679f9299534e488a171a9bb8f9bb891de247aab
13455 Author: Gerald Van Baren <vanbaren@cideas.com>
13456 Date: Fri Apr 6 14:17:14 2007 -0400
13458 libfdt: Make fdt_check_header() public
13460 Changed _fdt_check_header() to fdt_check_header() and made it part of
13461 the interface - it is a useful routine.
13463 Also did some asthetics cleanup to the include files (headers).
13465 commit c0707ce65677650b5ceab0500ee50ae5168afef2
13466 Author: Aubrey Li <aubrey.adi@gmail.com>
13467 Date: Thu Apr 5 18:34:06 2007 +0800
13469 [Blackfin][PATCH] Kill off a bunch of common local prototypes
13471 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
13472 Author: Aubrey Li <aubrey.adi@gmail.com>
13473 Date: Thu Apr 5 18:33:04 2007 +0800
13475 [Blackfin][PATCH] Fix dynamic CPLB generation issue
13477 commit 0445e3a264251d75b1be45ef713c70726a2952f0
13478 Author: Aubrey Li <aubrey.adi@gmail.com>
13479 Date: Thu Apr 5 18:31:47 2007 +0800
13481 [Blackfin][PATCH] minior cleanup
13483 commit 155fd766573981090e638b493d5857562151862e
13484 Author: Aubrey Li <aubrey.adi@gmail.com>
13485 Date: Thu Apr 5 18:31:18 2007 +0800
13487 [Blackfin][PATCH] Fix copyright and update license
13489 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
13490 Author: Aubrey Li <aubrey.adi@gmail.com>
13491 Date: Thu Apr 5 18:30:25 2007 +0800
13493 [Blackfin][PATCH] Add BF537 EMAC driver initialization
13495 commit 889256e8604e0c68db1d866d720894dffede9df6
13496 Author: Aubrey Li <aubrey.adi@gmail.com>
13497 Date: Thu Apr 5 18:29:55 2007 +0800
13499 [Blackfin][PATCH] call real the system synchronize instruction
13501 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
13502 Author: Aubrey Li <aubrey.adi@gmail.com>
13503 Date: Thu Apr 5 18:29:17 2007 +0800
13505 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
13507 commit dfeeab2cd680df047e68e723b246adf6f33bb556
13508 Author: Aubrey Li <aubrey.adi@gmail.com>
13509 Date: Thu Apr 5 18:28:34 2007 +0800
13511 [Blackfin][PATCH]: fix flash unaligned copy issue
13513 commit 443feb740584e406efa203af909fe2926608e8d5
13514 Author: Igor Marnat <marny@rambler.ru>
13515 Date: Wed Mar 21 09:55:01 2007 +0300
13517 Update usage of 'nc' in README.NetConsole
13519 Added information about usage of NetConsole on systems where the -l and -p
13520 switches are mutually exclusive.
13522 Signed-off-by: Igor Marnat <marny@rambler.ru>
13523 Signed-off-by: Ben Warren <bwarren@qstreams.com>
13525 commit 31c98a88228021b314c89ebb8104fb6473da4471
13526 Author: Wolfgang Denk <wd@denx.de>
13527 Date: Wed Apr 4 02:09:30 2007 +0200
13529 Minor coding style cleanup.
13531 commit 94abd7c0583ebe01e799b25f451201deeaab550d
13532 Author: Wolfgang Denk <wd@denx.de>
13533 Date: Wed Apr 4 01:49:15 2007 +0200
13537 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
13538 Author: Rodolfo Giometti <giometti@enneenne.com>
13539 Date: Tue Apr 3 14:27:18 2007 +0200
13541 Support for the Philips ISP116x HCD (Host Controller Driver)
13543 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
13545 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
13546 Author: Markus Klotzbuecher <mk@denx.de>
13547 Date: Tue Apr 3 14:27:08 2007 +0200
13549 USB: cleanup monahans usb support. Remove dead code.
13551 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13553 commit a65c5768e5537530bd1780af3d3fddc3113a163c
13554 Author: Stefan Roese <sr@denx.de>
13555 Date: Mon Apr 2 10:09:30 2007 +0200
13557 ppc4xx: Change SysACE address on Katmai
13559 With this new base address of the Xilinx SystemACE controller
13560 the Linux driver will be easier to adapt, since it can now be
13561 mapped via the "normal" ioremap() call.
13563 Signed-off-by: Stefan Roese <sr@denx.de>
13565 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
13566 Author: Gerald Van Baren <vanbaren@cideas.com>
13567 Date: Sat Mar 31 14:30:53 2007 -0400
13569 Fix some minor whitespace violations.
13571 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
13572 Author: Gerald Van Baren <vanbaren@cideas.com>
13573 Date: Sat Mar 31 12:23:51 2007 -0400
13575 Add a flattened device tree (fdt) command (2 of 2)
13577 Modifications to the existing code to support the new fdt command.
13579 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
13580 Author: Gerald Van Baren <vanbaren@cideas.com>
13581 Date: Sat Mar 31 12:22:10 2007 -0400
13583 Add a flattened device tree (fdt) command (1 of 2)
13585 The fdt command uses David Gibson's libfdt library to manipulate as well
13586 as print the flattened device tree. This patch is the new command,
13587 the second part is the modifications to the existing code.
13589 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
13590 Author: Gerald Van Baren <vanbaren@cideas.com>
13591 Date: Sat Mar 31 12:13:43 2007 -0400
13593 libfdt: Enhanced and published fdt_next_tag()
13595 Enhanced the formerly private function _fdt_next_tag() to allow stepping
13596 through the tree, used to produce a human-readable dump, and made
13597 it part of the published interface.
13598 Also added some comments.
13600 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
13601 Author: Gerald Van Baren <vanbaren@cideas.com>
13602 Date: Sat Mar 31 12:05:39 2007 -0400
13604 libfdt: Customizations for use by u-boot.
13606 Changes to David Gibson's original source to fit into u-boot's
13607 environment. No functionality changes.
13609 commit 35748177c64a4a83a00057e93bb33e40278a2a96
13610 Author: Gerald Van Baren <vanbaren@cideas.com>
13611 Date: Sat Mar 31 12:00:56 2007 -0400
13613 libfdt: Import libfdt source (2 of 2)
13615 This adds the applicable libfdt source files (unmodified) and a README
13616 to explain where the source came from.
13618 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
13619 Author: Gerald Van Baren <vanbaren@cideas.com>
13620 Date: Sat Mar 31 11:59:59 2007 -0400
13622 libfdt: Import libfdt source (1 of 2)
13624 This adds the applicable libfdt source files (unmodified) and a README
13625 to explain where the source came from.
13627 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
13628 Author: Stefan Roese <sr@denx.de>
13629 Date: Sat Mar 31 13:16:23 2007 +0200
13631 ppc4xx: Update Katmai bootstrap command
13633 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
13636 Signed-off-by: Stefan Roese <sr@denx.de>
13638 commit cabee756a6532986729477c3cc1ea16ef8517ad2
13639 Author: Stefan Roese <sr@denx.de>
13640 Date: Sat Mar 31 13:15:06 2007 +0200
13642 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
13644 Additional RAM information is now printed upon powerup, like
13645 DDR2 frequency and CAS latency.
13647 Signed-off-by: Stefan Roese <sr@denx.de>
13649 commit 60723803431ac75cad085690789e433d5ab9174e
13650 Author: Stefan Roese <sr@denx.de>
13651 Date: Sat Mar 31 08:48:36 2007 +0200
13653 ppc4xx: Change Yucca config file to support ECC
13655 With the updated 44x DDR2 driver the Yucca board now supports
13656 ECC generation and checking.
13658 Signed-off-by: Stefan Roese <sr@denx.de>
13660 commit 490e5730c674b20d708b783a2c5ffd7208f83873
13661 Author: Stefan Roese <sr@denx.de>
13662 Date: Sat Mar 31 08:47:34 2007 +0200
13664 ppc4xx: Fix "bootstrap" command for Katmai board
13666 The board specific "bootstrap" command is now fixed and can
13667 be used for the AMCC Katmai board to configure different
13668 CPU/PLB/OPB frequencies.
13670 Signed-off-by: Stefan Roese <sr@denx.de>
13672 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
13673 Author: Stefan Roese <sr@denx.de>
13674 Date: Sat Mar 31 08:46:08 2007 +0200
13676 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
13678 Fix a bug in the auto calibration routine. This driver now runs
13679 more reliable with the tested modules. It's also tested with
13680 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
13682 Signed-off-by: Stefan Roese <sr@denx.de>
13684 commit 342cd097be1e7affe82f42ab3da220959a699e64
13685 Author: Michal Simek <monstr@monstr.eu>
13686 Date: Fri Mar 30 22:52:09 2007 +0200
13688 [PATCH] Clean include dependence
13690 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
13691 Author: Michal Simek <monstr@monstr.eu>
13692 Date: Fri Mar 30 22:42:45 2007 +0200
13694 [CLEAN] Remove inefficient Suzaku code
13696 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
13697 Author: Stefan Roese <sr@denx.de>
13698 Date: Wed Mar 28 15:03:16 2007 +0200
13700 Merge some AMCC make targets to keep the top-level Makefile smaller
13702 Signed-off-by: Stefan Roese <sr@denx.de>
13704 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
13705 Author: Stefan Roese <sr@denx.de>
13706 Date: Wed Mar 28 14:52:12 2007 +0200
13708 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
13710 The "old" i2c commands (iprobe, imd...) are now compiled in again,
13711 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
13714 Signed-off-by: Stefan Roese <sr@denx.de>
13716 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
13717 Author: Michal Simek <monstr@monstr.eu>
13718 Date: Tue Mar 27 00:32:16 2007 +0200
13720 PATCH: Resolve GPL license problem
13722 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
13723 Author: Rodolfo Giometti <giometti@enneenne.com>
13724 Date: Mon Mar 26 12:03:36 2007 +0200
13726 PXA: pxa27x USB OHCI support
13728 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
13730 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
13731 Author: Markus Klotzbuecher <mk@denx.de>
13732 Date: Mon Mar 26 11:21:05 2007 +0200
13734 USB: remove the S3C24X0_merge #define, which was introduced while
13735 merging OHCI drivers.
13737 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13739 commit 1798049522f594013aea29457d46794298c6ae15
13740 Author: Michal Simek <root@monstr.eu>
13741 Date: Mon Mar 26 01:39:07 2007 +0200
13743 Support for XUPV2P board
13745 BSP autoconfig support
13747 commit 0d974d5297349504a2ddfa09314be573b5df320a
13748 Author: Stefan Roese <sr@denx.de>
13749 Date: Sat Mar 24 15:57:09 2007 +0100
13751 [PATCH] Add 4xx GPIO functions
13753 This patch adds some 4xx GPIO functions. It also moves some of the
13754 common code and defines into a common 4xx GPIO header file.
13756 Signed-off-by: Stefan Roese <sr@denx.de>
13758 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
13759 Author: Stefan Roese <sr@denx.de>
13760 Date: Sat Mar 24 15:55:58 2007 +0100
13762 [PATCH] Small Sequoia cleanup
13764 Signed-off-by: Stefan Roese <sr@denx.de>
13766 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
13767 Author: Stefan Roese <sr@denx.de>
13768 Date: Sat Mar 24 15:45:34 2007 +0100
13770 [PATCH] Clean up 40EZ/Acadia support
13772 This patch cleans up all the open issue of the preliminary
13775 Signed-off-by: Stefan Roese <sr@denx.de>
13777 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
13778 Author: Jon Loeliger <jdl@freescale.com>
13779 Date: Tue Dec 12 11:02:20 2006 -0600
13781 Fix 8641HPCN problem with ld version 2.16
13783 (Dot outside sections problem).
13785 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
13787 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13789 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
13790 Author: Haiying Wang <haiying.wang@freescale.com>
13791 Date: Thu Dec 7 10:35:55 2006 -0600
13793 Set Rev 2.x 86xx PIC in mixed mode.
13795 Prevent false interrupt from hanging Linux as MSR[EE] is set
13796 to enable interrupts by changing the PIC out of the default
13797 pass through mode into mixed mode.
13799 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
13800 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13802 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
13803 Author: Jason Jin <jason.jin@freescale.com>
13804 Date: Thu Dec 7 10:32:35 2006 -0600
13806 Add flash cmd function to 8641HPCN ramboot
13808 Also fixes some commmand for 8641 HPCN ramboot case.
13810 Signed-off-by: Jason Jin <jason.jin@freescale.com>
13811 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13813 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
13814 Author: Ed Swarthout <ed.swarthout@freescale.com>
13815 Date: Thu Dec 7 10:34:14 2006 -0600
13817 Add support for 8641 Rev 2 silicon.
13819 Without this patch, I am unable to get to the prompt on rev 2 silicon.
13820 Only set ddrioovcr for rev1.
13822 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
13823 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13825 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
13826 Author: Wolfgang Denk <wd@denx.de>
13827 Date: Thu Mar 22 00:13:12 2007 +0100
13829 Code cleanup / re-insert previous Copyright entries.
13831 Signed-off-by: Wolfgang Denk <wd@denx.de>
13833 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
13834 Author: Wolfgang Denk <wd@denx.de>
13835 Date: Wed Mar 21 23:26:15 2007 +0100
13837 Code cleanup. Update CHANGELOG
13839 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
13840 Author: Stefan Roese <sr@denx.de>
13841 Date: Wed Mar 21 14:54:29 2007 +0100
13843 ppc4xx: Fix file mode of include/configs/acadia.h
13845 Signed-off-by: Stefan Roese <sr@denx.de>
13847 commit d5f4614c9350d9333e575100fb250aab774d0258
13848 Author: Markus Klotzbuecher <mk@denx.de>
13849 Date: Wed Mar 21 14:41:46 2007 +0100
13851 SPC1920: fix small clock routing bug
13853 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13855 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
13856 Author: Stefan Roese <sr@denx.de>
13857 Date: Wed Mar 21 13:39:57 2007 +0100
13859 [PATCH] Add AMCC Acadia (405EZ) eval board support
13861 This patch adds support for the new AMCC Acadia eval board.
13863 Please note that this Acadia/405EZ support is still in a beta stage.
13864 Still lot's of cleanup needed but we need a preliminary release now.
13866 Signed-off-by: Stefan Roese <sr@denx.de>
13868 commit e01bd218b00af73499331a1a701625a852cd286f
13869 Author: Stefan Roese <sr@denx.de>
13870 Date: Wed Mar 21 13:38:59 2007 +0100
13872 [PATCH] Add AMCC PPC405EZ support
13874 This patch adds support for the new AMCC 405EZ PPC. It is in
13875 preparation for the AMCC Acadia board support.
13877 Please note that this Acadia/405EZ support is still in a beta stage.
13878 Still lot's of cleanup needed but we need a preliminary release now.
13880 Signed-off-by: Stefan Roese <sr@denx.de>
13882 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
13883 Author: Heiko Schocher <hs@pollux.denx.de>
13884 Date: Wed Mar 21 08:45:17 2007 +0100
13886 [PATCH] TQM8272: dont change the bits given from the HRCW
13887 for the SIUMCR and BCR Register.
13888 Fix the calculation for the EEprom Size
13890 Signed-off-by: Heiko Schocher <hs@denx.de>
13892 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
13893 Author: Aubrey Li <aubrey.adi@gmail.com>
13894 Date: Tue Mar 20 18:16:24 2007 +0800
13896 [Blackfin][PATCH] Add BF561 EZKIT board support
13898 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
13899 Author: Aubrey Li <aubrey.adi@gmail.com>
13900 Date: Mon Mar 19 22:55:58 2007 +0800
13902 [Blackfin][PATCH] minor cleanup
13904 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
13905 Author: Wolfgang Denk <wd@denx.de>
13906 Date: Mon Mar 19 13:10:08 2007 +0100
13908 Remove obsoleted POST files.
13910 Signed-off-by: Wolfgang Denk <wd@denx.de>
13912 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
13913 Author: Aubrey Li <aubrey.adi@gmail.com>
13914 Date: Mon Mar 19 01:26:11 2007 +0800
13916 [PATCH] Add flash chip M29W320ET/B support
13918 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
13919 Author: Aubrey Li <aubrey.adi@gmail.com>
13920 Date: Mon Mar 19 01:24:52 2007 +0800
13922 [Blackfin][PATCH] Add BF537 stamp board support
13924 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
13925 Author: Stefan Roese <sr@denx.de>
13926 Date: Fri Mar 16 21:11:42 2007 +0100
13928 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
13930 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
13931 DDR memory are dynamically programmed matching the total size
13932 of the equipped memory (DIMM modules).
13934 Signed-off-by: Stefan Roese <sr@denx.de>
13936 commit 76d1466f918b881cda2d259254761e73885093c2
13937 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13938 Date: Tue Mar 13 13:38:05 2007 +0100
13940 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
13941 boards in terms of unification.
13943 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13945 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
13946 Author: Wolfgang Denk <wd@denx.de>
13947 Date: Tue Mar 13 16:05:55 2007 +0100
13949 Make SC3 board build with 'make O='; use 'addcons' consistently
13950 (SC3 and Jupiter used to use 'addcon' instead).
13952 Signed-off-by: Wolfgang Denk wd@denx.de
13954 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
13955 Author: Heiko Schocher <hs@pollux.denx.de>
13956 Date: Tue Mar 13 09:40:59 2007 +0100
13958 [PATCH] update board config for jupiter Board:
13960 CONFIG_CMDLINE_EDITING,
13961 CFG_ENV_ADDR_REDUND activated
13963 Signed-off-by: Heiko Schocher <hs@denx.de>
13965 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
13966 Author: Aubrey Li <aubrey.adi@gmail.com>
13967 Date: Mon Mar 12 12:11:55 2007 +0800
13969 [Blackfin][PATCH] minor cleanup
13971 commit bfa5754a58477ac917d21527cd0f079d87cf188e
13972 Author: Aubrey Li <aubrey.adi@gmail.com>
13973 Date: Mon Mar 12 01:42:06 2007 +0800
13975 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
13977 commit 8440bb14581a294375c34b91b42512f9753d1130
13978 Author: Aubrey Li <aubrey.adi@gmail.com>
13979 Date: Mon Mar 12 00:25:14 2007 +0800
13981 [Blackfin][PATCH] code cleanup
13983 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
13984 Author: Michal Simek <monstr@monstr.eu>
13985 Date: Sun Mar 11 13:48:24 2007 +0100
13987 [Microblaze][PATCH] part 2
13989 interrupt controller support
13993 board information support
13995 booting image support
13997 adding support for Xilinx ML401
13999 commit 76316a318de91f6184e7c22a10e02d275ade2441
14000 Author: Michal Simek <monstr@monstr.eu>
14001 Date: Sun Mar 11 13:42:58 2007 +0100
14003 [Microblaze][PATCH]
14005 interrupt controller support
14009 board information support
14011 booting image support
14013 adding support for Xilinx ML401
14015 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
14016 Author: Aubrey Li <aubrey.adi@gmail.com>
14017 Date: Sat Mar 10 23:49:29 2007 +0800
14019 [Blackfin][PATCH] code cleanup
14021 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
14022 Author: Aubrey.Li <aubrey.adi@gmail.com>
14023 Date: Fri Mar 9 13:40:56 2007 +0800
14025 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
14027 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
14028 Author: Aubrey.Li <aubrey.adi@gmail.com>
14029 Date: Fri Mar 9 13:38:44 2007 +0800
14031 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
14033 commit 992423ab43c2bcf6b704853bd00af77450915e20
14034 Author: Stefan Roese <sr@denx.de>
14035 Date: Thu Mar 8 23:00:08 2007 +0100
14037 ppc4xx: Fix file mode of sequoia.c
14039 Signed-off-by: Stefan Roese <sr@denx.de>
14041 commit eb92f613556800f7483666db09d9a237ad911d4a
14042 Author: Wolfgang Denk <wd@pollux.denx.de>
14043 Date: Thu Mar 8 22:52:51 2007 +0100
14047 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
14048 Author: John Otken john@softadvances.com <john@softadvances.com>
14049 Date: Thu Mar 8 09:39:48 2007 -0600
14051 ppc4xx: Clear Sequoia/Rainier security engine reset bits
14053 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
14055 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
14056 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14057 Date: Thu Mar 8 16:26:52 2007 +0100
14059 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
14061 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14063 commit d9fc703246840c4b268debf48c334ba55c597dc0
14064 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14065 Date: Thu Mar 8 16:25:47 2007 +0100
14067 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
14069 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14071 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
14072 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14073 Date: Thu Mar 8 16:23:11 2007 +0100
14075 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
14077 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14079 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
14080 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14081 Date: Thu Mar 8 16:20:32 2007 +0100
14083 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
14085 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14087 commit f9fc6a5852a6335840882fa2111925010eea1abe
14088 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14089 Date: Wed Mar 7 15:32:01 2007 +0100
14091 fixed ethernet phy configuration for plu405 board
14093 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14095 commit 769104c9356594deb2092e204a39c05b33202d6c
14096 Author: Wolfgang Denk <wd@pollux.denx.de>
14097 Date: Thu Mar 8 21:49:27 2007 +0100
14101 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
14102 Author: Stefan Roese <sr@denx.de>
14103 Date: Thu Mar 8 10:13:16 2007 +0100
14105 [PATCH] Update AMCC Luan 440SP eval board support
14107 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
14108 inititializition. This includes DDR auto calibration and support
14109 for different DIMM modules, instead of the fixed setup used in
14110 the earlier version.
14112 This patch also enables the cache in FLASH for the startup
14113 phase of U-Boot (while running from FLASH). After relocating to
14114 SDRAM the cache is disabled again. This will speed up the boot
14115 process, especially the SDRAM setup, since there are some loops
14116 for memory testing (auto calibration).
14118 Signed-off-by: Stefan Roese <sr@denx.de>
14120 commit 2f5df47351910a2936c7741cf111855829200943
14121 Author: Stefan Roese <sr@denx.de>
14122 Date: Thu Mar 8 10:10:18 2007 +0100
14124 [PATCH] Update AMCC Yucca 440SPe eval board support
14126 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
14127 inititializition. This includes DDR auto calibration and support
14128 for different DIMM modules, instead of the fixed setup used in
14129 the earlier version.
14131 Signed-off-by: Stefan Roese <sr@denx.de>
14133 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
14134 Author: Stefan Roese <sr@denx.de>
14135 Date: Thu Mar 8 10:07:18 2007 +0100
14137 ppc4xx: Small AMCC Katmai 440SPe update
14139 Signed-off-by: Stefan Roese <sr@denx.de>
14141 commit df294497479b1dca6dd86318b2a912f72fede0df
14142 Author: Stefan Roese <sr@denx.de>
14143 Date: Thu Mar 8 10:06:09 2007 +0100
14145 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
14147 Signed-off-by: Stefan Roese <sr@denx.de>
14149 commit 83853178bd36bca6f0f8f1331476620c84a587fc
14150 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
14151 Date: Wed Mar 7 12:14:50 2007 -0600
14153 net - Support ping reply when processing net-loop
14155 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
14157 This permits the ping command to test the phy interface when the phy
14158 is put in loopback mode (typically by setting register 0 bit 14).
14160 It also allows the port to respond to an external ping when u-boot is
14161 processing some other net command (such as tftp). This is useful when
14162 tftp appears to hang.
14164 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14165 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14167 commit fa1aef15bcd47736687be1af544506e90fba545d
14168 Author: Stefan Roese <sr@denx.de>
14169 Date: Wed Mar 7 16:43:00 2007 +0100
14171 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
14173 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
14174 DDR memory are dynamically programmed matching the total size
14175 of the equipped memory (DIMM modules).
14177 Signed-off-by: Stefan Roese <sr@denx.de>
14179 commit e2ebe696818939e2b974628be9c921ea3fe9de13
14180 Author: Stefan Roese <sr@denx.de>
14181 Date: Wed Mar 7 16:39:36 2007 +0100
14183 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
14185 This patch fixes a problem that occurs when 2 DIMM's are
14186 used. This problem was first spotted and fixed by Gerald Jackson
14187 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
14188 problem in a little more clever way.
14190 This patch also adds the nice functionality to dynamically
14191 create the TLB entries for the SDRAM (tlb.c). So we should
14192 never run into such problems with wrong (too short) TLB
14193 initialization again on these platforms.
14195 As this feature is new to the "old" 44x SPD DDR driver, it
14196 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
14198 Signed-off-by: Stefan Roese <sr@denx.de>
14200 commit 39218433983417b9df087976a79e3f80dd5e83d6
14201 Author: Wolfgang Denk <wd@denx.de>
14202 Date: Wed Mar 7 16:33:44 2007 +0100
14204 UC101: fix compiler warnings
14206 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
14207 Author: Wolfgang Denk <wd@pollux.denx.de>
14208 Date: Wed Mar 7 16:19:46 2007 +0100
14210 HMI1001: fix build error, cleanup compiler warnings.
14212 commit ad5bb451ade552c44bef9119d907929ebc2c126f
14213 Author: Wolfgang Denk <wd@pollux.denx.de>
14214 Date: Tue Mar 6 18:08:43 2007 +0100
14216 Restructure POST directory to support of other CPUs, boards, etc.
14218 commit a5284efd125967675b2e9c6ef7b95832268ad360
14219 Author: Wolfgang Denk <wd@pollux.denx.de>
14220 Date: Tue Mar 6 18:01:47 2007 +0100
14222 Fix HOSTARCH handling.
14223 Patch by Mike Frysinger, Mar 05 2007
14225 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
14226 Author: Stefan Roese <sr@denx.de>
14227 Date: Tue Mar 6 07:47:04 2007 +0100
14229 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
14231 As provided by the AMCC applications team, this patch optimizes the
14232 DDR2 setup for 166MHz bus speed. The values provided are also save
14233 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
14234 setup has to be adjusted as done in this patch.
14236 For this the NAND booting version had to include the "speed.c" file
14237 from the cpu/ppc4xx directory. With this addition the NAND SPL image
14238 will just fit into the 4kbytes of program space. gcc version 4.x as
14239 provided with ELDK 4.x is needed to generate this optimized code.
14241 Signed-off-by: Stefan Roese <sr@denx.de>
14243 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
14244 Author: Wolfgang Denk <wd@pollux.denx.de>
14245 Date: Sun Mar 4 01:36:05 2007 +0100
14249 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
14250 Author: Kim Phillips <kim.phillips@freescale.com>
14251 Date: Wed Feb 28 00:02:04 2007 -0600
14253 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
14255 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
14257 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
14258 Author: Kumar Gala <galak@kernel.crashing.org>
14259 Date: Tue Feb 27 23:51:42 2007 -0600
14261 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
14263 The config value for:
14271 Were not being used when setting the appropriate register
14274 * CFG_SCCR_USBMPHCM
14279 To allow full config of the SCCR.
14281 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
14282 that were just bogus.
14284 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14286 commit d51b3cf371cd441030460ef19d36b2924c361b1a
14287 Author: Kim Phillips <kim.phillips@freescale.com>
14288 Date: Thu Feb 22 20:06:57 2007 -0600
14290 mpc83xx: update [local-]mac-address properties on UEC based devices
14292 8360 and 832x weren't updating their [local-]mac-address
14293 properties. This patch fixes that.
14295 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14297 commit 61f4f912acbe60776c5e00df1ec94094ce672957
14298 Author: Timur Tabi <timur@freescale.com>
14299 Date: Tue Feb 13 10:41:42 2007 -0600
14301 mpc83xx: write MAC address to mac-address and local-mac-address
14303 Some device trees have a mac-address property, some have local-mac-address,
14304 and some have both. To support all of these device trees, this patch
14305 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
14306 This function already updates local-mac-address.
14308 Signed-off-by: Timur Tabi <timur@freescale.com>
14310 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
14311 Author: Kim Phillips <kim.phillips@freescale.com>
14312 Date: Tue Feb 27 18:41:08 2007 -0600
14314 mpc83xx: add command line editing by default
14316 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
14317 Author: Kim Phillips <kim.phillips@freescale.com>
14318 Date: Wed Feb 14 19:50:53 2007 -0600
14320 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
14322 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
14323 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
14325 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
14327 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14328 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
14330 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
14331 Author: Xie Xiaobo <r63061@freescale.com>
14332 Date: Wed Feb 14 18:27:17 2007 +0800
14334 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
14336 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
14337 it pass DDR/DDR2 compliance tests.
14339 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
14341 commit b110f40bd180c6b560276589beedf753e97c46ce
14342 Author: Xie Xiaobo <r63061@freescale.com>
14343 Date: Wed Feb 14 18:27:06 2007 +0800
14345 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
14347 MPC8360E rev2.0 have new spridr,and PVR value,
14348 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
14350 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
14352 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
14353 Author: Xie Xiaobo <r63061@freescale.com>
14354 Date: Wed Feb 14 18:26:44 2007 +0800
14356 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
14358 MPC8349E rev3.1 have new spridr,and PVR value,
14359 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
14361 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
14363 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
14364 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
14365 Date: Wed Jan 31 11:04:19 2007 +0100
14367 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
14369 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
14370 which is used to se if an slave will ACK after receiving its address.
14372 Correct i2c probing to use this method as the old method could upset
14373 a slave as it wrote a data byte to it.
14375 Add a small delay in i2c_init() to let the controller
14376 shutdown any ongoing I2C activity.
14378 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
14380 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
14381 Author: Timur Tabi <timur@freescale.com>
14382 Date: Wed Jan 31 15:54:29 2007 -0600
14384 mpc83xx: Add support for the MPC8349E-mITX-GP
14386 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
14387 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
14388 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
14390 Signed-off-by: Timur Tabi <timur@freescale.com>
14392 commit fab16807adad350f618024350c6950165c247c72
14393 Author: Timur Tabi <timur@freescale.com>
14394 Date: Wed Jan 31 15:54:20 2007 -0600
14396 mpc83xx: Delete sdram_init() for MPC8349E-mITX
14398 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
14399 never does anything. This patch deletes it.
14401 Signed-off-by: Timur Tabi <timur@freescale.com>
14403 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
14404 Author: Dave Liu <daveliu@freescale.com>
14405 Date: Fri Jan 19 10:43:26 2007 +0800
14407 mpc83xx: Fix the LAW1/3 bug
14409 The patch solves the alignment problem of the local bus access windows to
14410 render accessible the memory bank and PHY registers of UPC 1 (starting at
14411 0xf801 0000). What we actually did was to adjust the sizes of the bus
14412 access windows so that the base address alignment requirement would be met.
14414 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
14415 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
14416 Signed-off-by: Dave Liu <daveliu@freescale.com>
14418 commit 97c4b397dce236a7318b304667bf89e59d08b17c
14419 Author: Kim Phillips <kim.phillips@freescale.com>
14420 Date: Tue Jan 30 16:15:31 2007 -0600
14422 mpc83xx: don't hang if watchdog configured on 8360, 832x
14424 don't hang if watchdog configured on 8360, 832x
14426 The watchdog programming model is the same across all 83xx devices;
14427 make the code reflect that.
14429 commit b70047478570e371ce7223be342ce98afea0f7d6
14430 Author: Kim Phillips <kim.phillips@freescale.com>
14431 Date: Tue Jan 30 16:15:21 2007 -0600
14433 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
14435 protect memcpy to bad address if a local-mac-address is missing from dt
14437 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
14438 Author: Kim Phillips <kim.phillips@freescale.com>
14439 Date: Tue Jan 30 16:15:04 2007 -0600
14441 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
14443 make 8360 default environment fdt be 8360 (not 8349)
14445 commit a28899c910024a0226331df07207b1038c300c93
14446 Author: Emilian Medve <Emilian.Medve@freescale.com>
14447 Date: Tue Jan 30 16:14:50 2007 -0600
14449 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
14451 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
14452 be used for busy-waiting since it strips the 'volatile' property from
14453 the bd variable. gcc3 was working by pure luck.
14455 This is a follow on patch to "Fix the UEC driver bug of QE"
14457 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
14458 Author: Kumar Gala <galak@kernel.crashing.org>
14459 Date: Tue Jan 30 14:08:30 2007 -0600
14461 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
14463 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
14464 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
14465 CONFIG_MPC834X so they are more generic.
14467 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14469 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
14470 Author: Kim Phillips <kim.phillips@freescale.com>
14471 Date: Thu Jan 25 13:40:55 2007 -0600
14473 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
14475 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
14476 Author: Kim Phillips <kim.phillips@freescale.com>
14477 Date: Wed Jan 24 17:18:37 2007 -0600
14479 mpc83xx: sort Makefile targets
14481 reordered targets alphabetically
14483 commit 91e25769771c1164ed63ffca0add49f934ae3343
14484 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
14485 Date: Tue Jan 16 11:38:14 2007 -0500
14487 mpc83xx: U-Boot support for Wind River SBC8349
14489 I've redone the SBC8349 support to match git-current, which
14490 incorporates all the MPC834x updates from Freescale since the 1.1.6
14491 release, including the DDR changes.
14493 I've kept all the SBC8349 files as parallel as possible to the
14494 MPC8349EMDS ones for ease of maintenance and to allow for easy
14495 inspection of what was changed to support this board. Hence the SBC8349
14496 U-Boot has FDT support and everything else that the MPC8349EMDS has.
14498 Fortunately the Freescale updates added support for boards using CS0,
14499 but I had to change spd_sdram.c to allow for board specific settings for
14500 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
14501 default if the board doesn't specify a value.)
14503 Hopefully this should be mergeable as-is and require no whitespace
14504 cleanups or similar, but if something doesn't measure up then let me
14505 know and I'll fix it.
14510 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
14511 Author: Sam Song <samsongshu@yahoo.com.cn>
14512 Date: Thu Dec 14 19:03:21 2006 +0800
14514 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
14516 A redundant semicolon existed in mpc8349itx.c
14519 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
14521 commit f35f358241c549be3f75cfe2eaa642914275b7ba
14522 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
14523 Date: Wed Dec 6 21:23:55 2006 -0500
14525 mpc83xx: Put the version (and magic) after the HRCW.
14527 Put the version (and magic) after the HRCW. This puts it in a fixed
14528 location in flash, not at the start of flash but as close as we can get.
14530 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
14532 commit 48aecd969171a6e99a55fae04933857787f9a5bd
14533 Author: Dave Liu <r63238@freescale.com>
14534 Date: Thu Dec 7 21:14:51 2006 +0800
14536 mpc83xx: Add the MPC832XEMDS board readme
14538 Add the MPC832XEMDS board readme
14540 Signed-off-by: Dave Liu <daveliu@freescale.com>
14542 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
14543 Author: Dave Liu <r63238@freescale.com>
14544 Date: Thu Dec 7 21:13:15 2006 +0800
14546 mpc83xx: Add support for the MPC832XEMDS board
14548 This patch supports DUART, ETH3/4 and PCI etc.
14550 Signed-off-by: Dave Liu <daveliu@freescale.com>
14552 commit e080313c32322e15ab5a18eb896a252858c57284
14553 Author: Dave Liu <r63238@freescale.com>
14554 Date: Thu Dec 7 21:11:58 2006 +0800
14556 mpc83xx: streamline the 83xx immr head file
14558 For better format and style, I streamlined the 83xx head files,
14559 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
14560 duplicated macro definition appear in the both files; 2) the structure
14561 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
14562 macro definition put inside the each structure. So, I cleaned up the
14563 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
14564 moved the macro definition to mpc83xx.h, Just like MPC8260.
14568 *streamline the 83xx immr head file
14570 Signed-off-by: Dave Liu <daveliu@freescale.com>
14572 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
14573 Author: Dave Liu <r63238@freescale.com>
14574 Date: Wed Dec 6 11:38:17 2006 +0800
14576 mpc83xx: Fix the UEC driver bug of QE
14578 The patch prevents the GCC tool chain from striping useful code for
14579 optimization. It will make UEC ethernet driver workable, Otherwise the
14580 UEC will fail in tx when you are using gcc4.x. but the driver can work
14581 when using gcc3.4.3.
14585 *Prevent the GCC from striping code for optimization, Otherwise the UEC
14586 will tx failed when you are using gcc4.x.
14588 Signed-off-by: Dave Liu <daveliu@freescale.com>
14590 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
14591 Author: Stefan Roese <sr@denx.de>
14592 Date: Thu Mar 1 21:11:36 2007 +0100
14594 [PATCH] Update AMCC Katmai 440SPe eval board support
14596 This patch updates the recently added Katmai board support. The biggest
14597 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
14600 Please note, that still some problems are left with some memory
14601 configurations. See the driver for more details.
14603 Signed-off-by: Stefan Roese <sr@denx.de>
14605 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
14606 Author: Stefan Roese <sr@denx.de>
14607 Date: Thu Mar 1 07:03:25 2007 +0100
14609 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
14611 Signed-off-by: Stefan Roese <sr@denx.de>
14613 commit ccbc7036648e465697ca298ba51e0e76dda352a0
14614 Author: Wolfgang Denk <wd@pollux.denx.de>
14615 Date: Wed Feb 28 01:28:53 2007 +0100
14617 SC3: fix typo in default environment
14619 commit e344568b1b46af85ec32d815586f91bc115d6223
14620 Author: Sergei Poselenov <sposelenov@emcraft.com>
14621 Date: Tue Feb 27 20:15:30 2007 +0300
14623 MCC200: Fixes for update procedure
14625 - fix logic error in image type handling
14626 - make sure file system images (cramfs etc.) get stored in flash
14627 with image header stripped so they can be mounted through MTD
14629 commit 743571145b37182757d4e688a77860b36ee77573
14630 Author: Wolfgang Denk <wd@pollux.denx.de>
14631 Date: Tue Feb 27 14:26:04 2007 +0100
14633 Minor code cleanup.
14635 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
14636 Author: Sergei Poselenov <sposelenov@emcraft.com>
14637 Date: Tue Feb 27 12:40:16 2007 +0300
14639 MCC200 update - add LCD Progress Indicator
14641 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
14642 Author: Stefan Roese <sr@denx.de>
14643 Date: Thu Feb 22 07:43:34 2007 +0100
14645 [PATCH] get_dev() now unconditionally uses manual relocation
14647 Since the relocation fix is not included yet and we're not sure how
14648 it will be added, this patch removes code that required relocation
14649 to be fixed for now.
14651 Signed-off-by: Stefan Roese <sr@denx.de>
14653 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
14654 Author: Stefan Roese <sr@denx.de>
14655 Date: Thu Feb 22 07:40:23 2007 +0100
14657 [PATCH] Change systemace driver to select 8 & 16bit mode
14659 As suggested by Grant Likely this patch enables the Xilinx SystemACE
14660 driver to select 8 or 16bit mode upon startup.
14662 Signed-off-by: Stefan Roese <sr@denx.de>
14664 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
14665 Author: Haiying Wang <Haiying.Wang@freescale.com>
14666 Date: Wed Feb 21 16:52:31 2007 +0100
14668 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
14670 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
14671 is fully finished. The sync() is defined in each CPU's io.h file. For
14672 those CPUs which do not need sync for now, a dummy sync() is defined in
14673 their io.h as well.
14675 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
14677 commit da04995c7dc6772013a9a0dc5c767f190c402478
14678 Author: Stefan Roese <sr@denx.de>
14679 Date: Wed Feb 21 13:44:34 2007 +0100
14681 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
14683 Signed-off-by: Stefan Roese <sr@denx.de>
14685 commit 751bb57107d78978ae08e697c3deba816f5be091
14686 Author: Stefan Roese <sr@denx.de>
14687 Date: Tue Feb 20 13:21:57 2007 +0100
14689 [PATCH] Fix relocation problem with "new" get_dev() function
14691 This patch enables the "new" get_dev() function for block devices
14692 introduced by Grant Likely to be used on systems that still suffer
14693 from the relocation problems (manual relocation neede because of
14694 problems with linker script).
14696 Hopefully we can resolve this relocation issue soon for all platform
14697 so we don't need this additional code anymore.
14699 Signed-off-by: Stefan Roese <sr@denx.de>
14701 commit d93e2212f962668b3dce091ff5edc33f2347fe37
14702 Author: Stefan Roese <sr@denx.de>
14703 Date: Tue Feb 20 13:17:42 2007 +0100
14705 [PATCH] Update SystemACE driver for 16bit access
14707 This patch removes some problems when the Xilinx SystemACE driver
14708 is used with 16bit access on an big endian platform (like the
14711 Signed-off-by: Stefan Roese <sr@denx.de>
14713 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
14714 Author: Stefan Roese <sr@denx.de>
14715 Date: Tue Feb 20 13:15:40 2007 +0100
14717 [PATCH] Clean up Katmai (440SPe) linker script
14719 Signed-off-by: Stefan Roese <sr@denx.de>
14721 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
14722 Author: Stefan Roese <sr@denx.de>
14723 Date: Tue Feb 20 10:57:08 2007 +0100
14725 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
14727 Signed-off-by: Stefan Roese <sr@denx.de>
14729 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
14730 Author: Stefan Roese <sr@denx.de>
14731 Date: Tue Feb 20 10:51:26 2007 +0100
14733 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
14735 This patch switches to the desired I2C bus when the date/dtt
14736 commands are called. This can be configured using the
14737 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
14739 Signed-off-by: Stefan Roese <sr@denx.de>
14741 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
14742 Author: Stefan Roese <sr@denx.de>
14743 Date: Tue Feb 20 10:43:34 2007 +0100
14745 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
14747 This patch adds support for the DDR2 controller used on the
14748 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
14749 board and works fine with the following DIMM modules:
14751 - Corsair CM2X512-5400C4 (512MByte per DIMM)
14752 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
14753 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
14755 This patch also adds the nice functionality to dynamically
14756 create the TLB entries for the SDRAM (tlb.c). So we should
14757 never run into such problems with wrong (too short) TLB
14758 initialization again on these platforms.
14760 Signed-off-by: Stefan Roese <sr@denx.de>
14762 commit 36d830c9830379045f5daa9f542ac1c990c70068
14763 Author: Stefan Roese <sr@denx.de>
14764 Date: Tue Feb 20 10:35:42 2007 +0100
14766 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
14768 Since the existing 4xx SPD SDRAM initialization routines for the
14769 405 SDRAM controller and the 440 DDR controller don't have much in
14770 common this patch splits both drivers into different files.
14772 This is in preparation for the 440 DDR2 controller support (440SP/e).
14774 Signed-off-by: Stefan Roese <sr@denx.de>
14776 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
14777 Author: Stefan Roese <sr@denx.de>
14778 Date: Tue Feb 20 10:27:08 2007 +0100
14780 [PATCH] PPC4xx: Add support for multiple I2C busses
14782 This patch adds support for multiple I2C busses on the PPC4xx
14783 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
14784 to make use of this feature.
14786 It also merges the 405 and 440 i2c header files into one common
14789 Also the 4xx i2c reset procedure is reworked since I experienced
14790 some problems with the first access on the 440SPe Katmai board.
14792 Signed-off-by: Stefan Roese <sr@denx.de>
14794 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
14795 Author: Grant Likely <grant.likely@secretlab.ca>
14796 Date: Tue Feb 20 09:05:45 2007 +0100
14798 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
14800 Block device read/write is anonymous data; there is no need to use a
14801 typed pointer. void * is fine. Also add a hook for block_read functions
14803 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14805 commit 53758fa20e935cc87eeb0519ed365df753a6f289
14806 Author: Grant Likely <grant.likely@secretlab.ca>
14807 Date: Tue Feb 20 09:05:38 2007 +0100
14809 [PATCH 8_9] Add block_write hook to block_dev_desc_t
14811 Preparation for future patches which support block device writing
14813 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14815 commit f4852ebe6ca946a509667eb68be42026f837be76
14816 Author: Grant Likely <grant.likely@secretlab.ca>
14817 Date: Tue Feb 20 09:05:31 2007 +0100
14819 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
14821 Register read/write does not need to be wrapped in a full function. The
14822 patch replaces them with macros.
14824 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14826 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
14827 Author: Grant Likely <grant.likely@secretlab.ca>
14828 Date: Tue Feb 20 09:05:23 2007 +0100
14830 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
14832 The code in this file is not a command; it is a device driver. Put it in
14833 the correct place. There are zero functional changes in this patch, it
14834 only moves the file.
14836 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14838 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
14839 Author: Grant Likely <grant.likely@secretlab.ca>
14840 Date: Tue Feb 20 09:05:16 2007 +0100
14842 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
14844 This patch is in preparation of additional changes to the sysace driver.
14845 May as well take this opportunity to fixup the inconsistent whitespace since
14846 this file is about to undergo major changes anyway.
14848 There are zero functional changes in this patch. It only cleans up the
14851 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14853 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
14854 Author: Grant Likely <grant.likely@secretlab.ca>
14855 Date: Tue Feb 20 09:05:07 2007 +0100
14857 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
14859 isprint is already defined in ctype.c
14861 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14863 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
14864 Author: Grant Likely <grant.likely@secretlab.ca>
14865 Date: Tue Feb 20 09:05:00 2007 +0100
14867 [PATCH 3_9] Move buffer print code from md command to common function
14869 Printing a buffer is a darn useful thing. Move the buffer print code
14870 into print_buffer() in lib_generic/
14872 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14874 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
14875 Author: Grant Likely <grant.likely@secretlab.ca>
14876 Date: Tue Feb 20 09:04:52 2007 +0100
14878 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
14880 Change the xilinx device drivers and board code to include config.h
14881 instead of xparameters.h directly. config.h always includes the
14882 correct xparameters file. This change reduces the posibility of
14883 including the wrong file when adding a new xilinx board port
14885 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14887 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
14888 Author: Grant Likely <grant.likely@secretlab.ca>
14889 Date: Tue Feb 20 09:04:34 2007 +0100
14891 [PATCH 1_4] Merge common get_dev() routines for block devices
14893 Each of the filesystem drivers duplicate the get_dev routine. This change
14894 merges them into a single function in part.c
14896 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14898 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
14899 Author: Wolfgang Denk <wd@pollux.denx.de>
14900 Date: Mon Feb 19 23:09:51 2007 +0100
14902 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
14903 as root file system images.
14905 commit 489c696ae7211218961d159e43e722d74c36fcbc
14906 Author: Sergei Poselenov <sposelenov@emcraft.com>
14907 Date: Wed Feb 14 14:30:28 2007 +0300
14909 MCC200: Extensions to Software Update Mechanism
14911 Update / extend Software Update Mechanism for MCC200 board:
14913 - Add support for rootfs image added. The environment variables
14914 "rootfs_st" and "rootfs_nd" can be used to override the default
14915 values of the image start and end.
14916 - Remove excessive key check code.
14919 commit 4be23a12f23f1372634edc3215137b09768b7949
14920 Author: Stefan Roese <sr@denx.de>
14921 Date: Mon Feb 19 08:23:15 2007 +0100
14923 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
14925 As spotted by Matthias Fuchs, the READY input should not be
14926 enabled for the NOR FLASH on the Sequoia board.
14928 Signed-off-by: Stefan Roese <sr@denx.de>
14930 commit 2605e90bf676d48123afe5719a846d2b52b24aac
14931 Author: Heiko Schocher <hs@pollux.denx.de>
14932 Date: Fri Feb 16 07:57:42 2007 +0100
14934 [PATCH] Added support for the jupiter board.
14936 Signed-off-by: Heiko Schocher <hs@denx.de>
14938 commit 497d012e5be0194e1084073d0081eb1a844796b2
14939 Author: Gary Jennejohn <garyj@pollux.denx.de>
14940 Date: Mon Feb 12 13:11:50 2007 +0100
14942 LPC2292: patch from Siemens.
14944 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
14945 Author: Stefan Roese <sr@denx.de>
14946 Date: Sat Feb 10 08:49:31 2007 +0100
14948 [PATCH] Add missing p3mx.h file to repository (ups)
14950 Signed-off-by: Stefan Roese <sr@denx.de>
14952 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
14953 Author: Bartlomiej Sieka <tur@semihalf.com>
14954 Date: Fri Feb 9 10:45:42 2007 +0100
14956 [Motion-PRO] Preliminary support for the Motion-PRO board.
14958 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
14959 Author: Stefan Roese <sr@denx.de>
14960 Date: Wed Feb 7 16:51:08 2007 +0100
14962 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
14964 Some boards that can have more than 768MBytes of SDRAM need to
14965 set "initrd_high", so that the initrd can be accessed by the
14968 Signed-off-by: Stefan Roese <sr@denx.de>
14970 commit 7372ca68227930d03cffa548310524cad5b96733
14971 Author: Stefan Roese <sr@denx.de>
14972 Date: Fri Feb 2 12:44:22 2007 +0100
14974 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
14976 Previously the strapping DCR/SDR was read to determine if the internal PCI
14977 arbiter is enabled or not. This strapping bit can be overridden, so now
14978 the current status is read from the correct DCR/SDR register.
14980 Signed-off-by: Stefan Roese <sr@denx.de>
14982 commit 2aa54f651a42d198673318f07a20c89a43e4d197
14983 Author: Stefan Roese <sr@denx.de>
14984 Date: Fri Feb 2 12:42:08 2007 +0100
14986 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
14988 Signed-off-by: Stefan Roese <sr@denx.de>
14990 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
14991 Author: Stefan Roese <sr@denx.de>
14992 Date: Thu Feb 1 13:22:41 2007 +0100
14994 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
14996 When PCI PNP is enabled the pci pnp configuration routine is called
14997 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
14998 problems with some PCI cards. For now disable the PCI PNP configuration.
15000 Signed-off-by: Stefan Roese <sr@denx.de>
15002 commit 2902fadade3be7659467e8d074048c6b7068f5c0
15003 Author: Stefan Roese <sr@denx.de>
15004 Date: Wed Jan 31 16:56:10 2007 +0100
15006 [PATCH] Update 440EPx/440GRx cpu detection
15008 Signed-off-by: Stefan Roese <sr@denx.de>
15010 commit d5ea287b02a6945c3977410e364a879dd1a555c8
15011 Author: Stefan Roese <sr@denx.de>
15012 Date: Wed Jan 31 16:38:04 2007 +0100
15014 [PATCH] Update esd cpci5200 files
15016 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
15018 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
15019 Author: Stefan Roese <sr@denx.de>
15020 Date: Wed Jan 31 16:37:34 2007 +0100
15022 [PATCH] Add support for esd mecp5200 board
15024 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
15026 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
15027 Author: Stefan Roese <sr@denx.de>
15028 Date: Wed Jan 31 12:38:50 2007 +0100
15030 [PATCH] Remove unneccessary yellowstone board config file
15032 Signed-off-by: Stefan Roese <sr@denx.de>
15034 commit e802594b6fa1b166308820c276b96dc0d7cc731c
15035 Author: Stefan Roese <sr@denx.de>
15036 Date: Tue Jan 30 17:06:10 2007 +0100
15038 [PATCH] Update Sequoia (440EPx) config file
15040 The config file now handles the 2nd target, the Rainier (440GRx)
15041 evaluation board better. Additionally the PPC input clock was
15042 adjusted to match the correct value of 33.0 MHz.
15044 Signed-off-by: Stefan Roese <sr@denx.de>
15046 commit 700200c67e73b83751418abe7815840dca8fd6cb
15047 Author: Stefan Roese <sr@denx.de>
15048 Date: Tue Jan 30 17:04:19 2007 +0100
15050 [PATCH] Merge Yosemite & Yellowstone board ports
15052 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
15053 share one config file and all board specific files. This way we
15054 don't have to maintain two different sets of files for nearly
15057 Signed-off-by: Stefan Roese <sr@denx.de>
15059 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
15060 Author: Stefan Roese <sr@denx.de>
15061 Date: Tue Jan 30 15:01:49 2007 +0100
15063 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
15065 SCPU doesn't use redundant environment in flash.
15067 Signed-off-by: Stefan Roese <sr@denx.de>
15069 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
15070 Author: Stefan Roese <sr@denx.de>
15071 Date: Tue Jan 30 12:51:07 2007 +0100
15073 [PATCH] alpr: Update alpr board config file
15075 Signed-off-by: Stefan Roese <sr@denx.de>
15077 commit f8db84f132b1e335f20f96138a1f09ed97b08664
15078 Author: Wolfgang Denk <wd@pollux.denx.de>
15079 Date: Tue Jan 30 00:50:40 2007 +0100
15081 LPC2292 SODIMM port coding style cleanup.
15083 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
15084 Author: Gary Jennejohn <garyj@pollux.denx.de>
15085 Date: Wed Jan 24 12:16:56 2007 +0100
15087 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
15089 commit 2daf046ba627f85f44195815778140039636244e
15090 Author: Bartlomiej Sieka <tur@semihalf.com>
15091 Date: Tue Jan 23 17:22:06 2007 +0100
15093 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
15095 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
15096 Author: Bartlomiej Sieka <tur@semihalf.com>
15097 Date: Tue Jan 23 14:21:14 2007 +0100
15099 [iDMR] Flash driver on initialisation write-protects some sectors,
15100 currently sectors 0-3. Sector 3 does not need to be protected, though
15101 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
15102 fixes this, i.e., only sectors 0-2 are protected.
15104 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
15105 Author: Bartlomiej Sieka <tur@semihalf.com>
15106 Date: Tue Jan 23 14:11:22 2007 +0100
15108 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
15109 "mii device" results in "Unexpected exception"). Fixing this properly
15110 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
15111 this commit disables MII commads for now.
15113 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
15114 Author: Bartlomiej Sieka <tur@semihalf.com>
15115 Date: Tue Jan 23 13:25:22 2007 +0100
15117 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
15118 Identification Register (CIR).
15120 commit fdef388758506765d4d6a7155c8f1584c63ff581
15121 Author: roy zang <tie-fei.zang@freescale.com>
15122 Date: Mon Jan 22 13:19:21 2007 +0800
15124 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
15125 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
15126 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
15129 commit a4012396645533aef218354eeba754dff0deace8
15130 Author: Wolfgang Denk <wd@pollux.denx.de>
15131 Date: Fri Jan 19 23:08:39 2007 +0100
15133 Minor code cleanup.
15135 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
15136 Author: Heiko Schocher <hs@pollux.denx.de>
15137 Date: Fri Jan 19 19:57:10 2007 +0100
15139 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
15141 Signed-off-by: Heiko Schocher <hs@denx.de>
15143 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
15144 Author: Heiko Schocher <hs@pollux.denx.de>
15145 Date: Fri Jan 19 18:05:26 2007 +0100
15147 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
15148 if you must swap the bytes between reading/writing.
15149 (Needed for the SC3 board)
15151 Signed-off-by: Heiko Schocher <hs@denx.de>
15153 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
15154 Author: Stefan Roese <sr@denx.de>
15155 Date: Thu Jan 18 16:05:47 2007 +0100
15157 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
15159 Signed-off-by: Stefan Roese <sr@denx.de>
15161 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
15162 Author: Stefan Roese <sr@denx.de>
15163 Date: Thu Jan 18 11:54:52 2007 +0100
15165 [PATCH] Update Prodrive P3Mx support
15167 Signed-off-by: Stefan Roese <sr@denx.de>
15169 commit 34167a36c29ee946b727465db5c014746a08e978
15170 Author: Stefan Roese <sr@denx.de>
15171 Date: Thu Jan 18 11:48:10 2007 +0100
15173 [PATCH] Add missing Taishan config file
15175 Signed-off-by: Stefan Roese <sr@denx.de>
15177 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
15178 Author: Heiko Schocher <hs@pollux.denx.de>
15179 Date: Thu Jan 18 11:28:51 2007 +0100
15181 [PATCH] Fix: Compilerwarnings for SC3 board.
15182 The EBC Configuration Register is now by CFG_EBC_CFG definable
15183 Added JFFS2 support for the SC3 board.
15185 Signed-off-by: Heiko Schocher <hs@denx.de>
15187 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
15188 Author: Stefan Roese <sr@denx.de>
15189 Date: Thu Jan 18 10:25:34 2007 +0100
15191 [PATCH] Add support for AMCC Taishan PPC440GX eval board
15193 Signed-off-by: Stefan Roese <sr@denx.de>
15195 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
15196 Author: Wolfgang Denk <wd@pollux.denx.de>
15197 Date: Tue Jan 16 18:30:50 2007 +0100
15199 Raname solidcard3 into sc3; add redundant env for sc3
15201 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
15202 Author: Wolfgang Denk <wd@pollux.denx.de>
15203 Date: Tue Jan 16 12:46:35 2007 +0100
15205 Update default environment for Solidcard3
15207 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
15208 Author: Stefan Roese <sr@denx.de>
15209 Date: Mon Jan 15 09:46:29 2007 +0100
15211 [PATCH] Fix 440SPe rev B detection from previous patch
15213 Signed-off-by: Stefan Roese <sr@denx.de>
15215 commit a443d31410c571ee8f970da819a44d698fdd6b1f
15216 Author: Heiko Schocher <hs@pollux.denx.de>
15217 Date: Sun Jan 14 13:35:31 2007 +0100
15219 [FIX] correct I2C Writes for the LM81 Sensor.
15221 Signed-off-by: Heiko Schocher <hs@denx.de>
15223 commit 0bba5452835f19a61204edcda3a58112fd8e2208
15224 Author: Wolfgang Denk <wd@pollux.denx.de>
15225 Date: Sat Jan 13 11:17:10 2007 +0100
15227 Undo commit 3033ebb2: reset command does not take any arguments
15229 Haiying Wang's modification to the reset command was broken, undo it.
15231 Signed-off-by: Wolfgang Denk <wd@denx.de>
15233 commit 95981778cff0038fd9941044d6a3eda810e33258
15234 Author: Stefan Roese <sr@denx.de>
15235 Date: Sat Jan 13 08:01:03 2007 +0100
15237 [PATCH] Update 440SP(e) cpu revisions
15239 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
15241 Signed-off-by: Stefan Roese <sr@denx.de>
15243 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
15244 Author: Stefan Roese <sr@denx.de>
15245 Date: Sat Jan 13 07:59:56 2007 +0100
15247 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
15249 Now the board revision and the current PCI bus speed are printed after
15252 Also the EBC initialising is now done via defines in the board config
15255 Signed-off-by: Stefan Roese <sr@denx.de>
15257 commit 36adff362c2c0141ff8a810d42a7e478f779130f
15258 Author: Stefan Roese <sr@denx.de>
15259 Date: Sat Jan 13 07:59:19 2007 +0100
15261 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
15263 Now the board revision and the current PCI bus speed are printed after
15266 Also the EBC initialising is now done via defines in the board config
15269 Signed-off-by: Stefan Roese <sr@denx.de>
15271 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
15272 Author: Stefan Roese <sr@denx.de>
15273 Date: Sat Jan 13 07:57:51 2007 +0100
15275 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
15277 Now the board revision and the current PCI bus speed are printed after
15280 Signed-off-by: Stefan Roese <sr@denx.de>
15282 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
15283 Author: Heiko Schocher <hs@pollux.denx.de>
15284 Date: Thu Jan 11 15:44:44 2007 +0100
15286 Added support for the SOLIDCARD III board from Eurodesign
15288 Signed-off-by: Heiko Schocher <hs@denx.de>
15290 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
15291 Author: Reinhard Thies <Reinhard.Thies@web.de>
15292 Date: Wed Jan 10 14:41:14 2007 +0100
15294 Adjusted default environment for cam5200 board.
15296 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
15297 Author: Wolfgang Denk <wd@pollux.denx.de>
15298 Date: Wed Jan 10 15:35:52 2007 +0100
15302 commit 787fa15860a57833e50bd30555079a9cd4e519b8
15303 Author: Wolfgang Denk <wd@pollux.denx.de>
15304 Date: Wed Jan 10 01:28:39 2007 +0100
15306 Fix auto_update for MCC200 board.
15308 The invocation of do_auto_update() is moved to the end of the
15309 misc_init_r() function, after the flash mappings have been
15310 initialized. Please find attached a patch that implements that
15313 Also correct the decoding of the keypad status. With this update, the
15314 key that will trigger the update is Column 2, Row 2.
15316 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
15317 Author: Marian Balakowicz <m8@semihalf.com>
15318 Date: Wed Jan 10 00:26:15 2007 +0100
15320 CAM5200 flash driver modifications:
15321 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
15322 - add second build target 'cam5200_niosflash' which still uses custom driver
15324 commit 67fea022fa957f59653b5238c7496f80a6b70432
15325 Author: Markus Klotzbuecher <mk@denx.de>
15326 Date: Tue Jan 9 16:02:48 2007 +0100
15328 SPC1920: cleanup memory contoller setup
15330 commit 8fc2102faa23593c80381437c09f7745a14deb40
15331 Author: Markus Klotzbuecher <mk@denx.de>
15332 Date: Tue Jan 9 14:57:14 2007 +0100
15334 Fix the cpu speed setup to work with all boards.
15336 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
15337 Author: Markus Klotzbuecher <mk@denx.de>
15338 Date: Tue Jan 9 14:57:13 2007 +0100
15340 SPC1920: add support for the FM18L08 Ramtron FRAM
15342 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
15343 Author: Markus Klotzbuecher <mk@denx.de>
15344 Date: Tue Jan 9 14:57:13 2007 +0100
15346 SPC1920: update the HPI register addresses to work with the second
15347 generation of hardware
15349 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
15350 Author: Markus Klotzbuecher <mk@creamnet.de>
15351 Date: Tue Jan 9 14:57:13 2007 +0100
15353 Miscellanious spc1920 related cleanups
15355 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
15356 Author: Markus Klotzbuecher <mk@denx.de>
15357 Date: Tue Jan 9 14:57:12 2007 +0100
15359 SPC1920 GO/NOGO led should be set to color red in U-Boot
15361 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
15362 Author: Markus Klotzbuecher <mk@creamnet.de>
15363 Date: Tue Jan 9 14:57:12 2007 +0100
15365 Add support for the DS3231 RTC
15367 commit 8139567b60d678584b05f0718a681f2047c5e14f
15368 Author: Markus Klotzbuecher <mk@creamnet.de>
15369 Date: Tue Jan 9 14:57:11 2007 +0100
15371 SMC1 uses external CLK4 instead of BRG on spc1920
15373 commit d8d9de1a02fbd880b613d607143d1f57342affc7
15374 Author: Markus Klotzbuecher <mk@creamnet.de>
15375 Date: Tue Jan 9 14:57:10 2007 +0100
15377 Update the SPC1920 CMB PLD driver
15379 commit 3f34f869162750e5e999fd140f884f5de952bcfe
15380 Author: Markus Klotzbuecher <mk@creamnet.de>
15381 Date: Tue Jan 9 14:57:10 2007 +0100
15383 Add / enable I2C support on the spc1920 board
15385 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
15386 Author: Markus Klotzbuecher <mk@creamnet.de>
15387 Date: Tue Jan 9 14:57:10 2007 +0100
15389 Add support for the tms320671x host port interface (HPI)
15391 commit f4eb54529bb3664c3a562e488b460fe075f79d67
15392 Author: Wolfgang Denk <wd@pollux.denx.de>
15393 Date: Sun Jan 7 00:13:11 2007 +0100
15395 Prepare for release 1.2.0
15397 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
15398 Author: Stefan Roese <sr@denx.de>
15399 Date: Sat Jan 6 15:58:09 2007 +0100
15401 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
15403 This patch fixes a problem with an incorrect setup for the refresh
15404 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
15406 Signed-off-by: Stefan Roese <sr@denx.de>
15408 commit f16c1da9577f06c5fc08651a4065537407de4635
15409 Author: Stefan Roese <sr@denx.de>
15410 Date: Sat Jan 6 15:56:13 2007 +0100
15412 [PATCH] Update ALPR board files
15414 This update brings the ALPR board support to the newest version.
15415 It also fixes a problem with the NAND driver.
15417 Signed-off-by: Stefan Roese <sr@denx.de>
15419 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
15420 Author: Stefan Roese <sr@denx.de>
15421 Date: Fri Jan 5 11:46:05 2007 +0100
15423 [PATCH] nand: Fix problem with oobsize calculation
15425 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
15427 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
15428 returns a 0x15. In the code fragment below bits [1:0] determine the
15429 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
15430 next field is also ANDed with 0x3. However this is a one bit field
15431 as defined in the Hynix and Samsung parts in the 4th ID byte that
15432 determins the oobsize, not a two bit field. It works on Samsung as
15433 bits[3:2] are 01. However for the Hynix there is a 11 in these two
15434 bits, so the oob size gets messed up.
15436 I checked the correct linux code and the suggested fix from Brian is
15437 also available in the linux nand mtd driver.
15439 Signed-off-by: Stefan Roese <sr@denx.de>
15441 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
15442 Author: Stefan Roese <sr@denx.de>
15443 Date: Fri Jan 5 10:40:36 2007 +0100
15445 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
15447 This fix will make the MAL burst disabling patch for the Linux
15448 EMAC driver obsolete.
15450 Signed-off-by: Stefan Roese <sr@denx.de>
15452 commit 023889838282b6237b401664f22dd22dfba2c066
15453 Author: Stefan Roese <sr@denx.de>
15454 Date: Fri Jan 5 10:38:05 2007 +0100
15456 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
15458 This code will optimize the DDR2 controller setup on a board specific
15461 Note: This code doesn't work right now on the NAND booting image for the
15462 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
15464 Signed-off-by: Stefan Roese <sr@denx.de>
15466 commit cce4acbb68398634b8d011ed7bb0d12269c84230
15467 Author: Bartlomiej Sieka <tur@semihalf.com>
15468 Date: Thu Dec 28 19:08:21 2006 +0100
15471 - fix a typo in V38B config file
15472 - move watchdog initialisation earlier in the boot process
15473 - add "wdt=off" to default kernel command line (disables kernel watchdog)
15475 commit 92eb729bad876725aeea908d2addba0800620840
15476 Author: Wolfgang Denk <wd@pollux.denx.de>
15477 Date: Wed Dec 27 01:26:13 2006 +0100
15479 Fix bug in adaption of Stefano Babic's CFI driver patch.
15481 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
15482 Author: Wolfgang Denk <wd@pollux.denx.de>
15483 Date: Sun Dec 24 01:42:57 2006 +0100
15485 Minor code cleanup.
15487 commit d784fdb05900ada3686d5778783e1fb328e9fb66
15488 Author: Stefano Babic <sbabic@denx.de>
15489 Date: Tue Dec 12 00:22:42 2006 +0100
15491 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
15493 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
15494 Author: Stefan Roese <sr@denx.de>
15495 Date: Fri Dec 22 14:29:40 2006 +0100
15497 [PATCH] Fix sequoia flash autodetection (finally correct)
15499 Now 32MByte and 64MByte FLASH is know to work and other
15500 configurations should work too.
15502 Signed-off-by: Stefan Roese <sr@denx.de>
15504 commit 82e5236a8b719543643fd26d5827938ab2b94818
15505 Author: Wolfgang Denk <wd@pollux.denx.de>
15506 Date: Fri Dec 22 10:30:26 2006 +0100
15508 Minor code cleanup; update CHANGELOG.
15510 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
15511 Author: Heiko Schocher <hs@pollux.denx.de>
15512 Date: Thu Dec 21 17:17:02 2006 +0100
15514 Added support for the TQM8272 board from TQ
15516 Signed-off-by: Heiko Schocher <hs@denx.de>
15518 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
15519 Author: Heiko Schocher <hs@pollux.denx.de>
15520 Date: Thu Dec 21 16:14:48 2006 +0100
15522 [PATCH] Add support for the UC101 board from MAN.
15524 Signed-off-by: Heiko Schocher <hs@denx.de>
15526 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
15527 Author: Bartlomiej Sieka <tur@semihalf.com>
15528 Date: Wed Dec 20 00:29:43 2006 +0100
15530 Fix to make the baudrate changes immediate for the MCF52x2 family.
15532 commit daa6e418bcc0c717752e8de939c213c790286096
15533 Author: Bartlomiej Sieka <tur@semihalf.com>
15534 Date: Wed Dec 20 00:27:32 2006 +0100
15536 Preliminary support for the iDMR board (ColdFire).
15538 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
15539 Author: Andrei Safronov <safronov@pollux.denx.de>
15540 Date: Fri Dec 8 16:23:08 2006 +0100
15542 automatic update mechanism
15544 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
15545 Author: roy zang <tie-fei.zang@freescale.com>
15546 Date: Mon Dec 4 17:56:59 2006 +0800
15548 Slight code clean up.
15549 Add comments, delete duplicate define and remove spaces.
15550 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15552 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
15553 Author: roy zang <tie-fei.zang@freescale.com>
15554 Date: Mon Dec 4 17:54:21 2006 +0800
15556 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
15557 multiplier table can not refect the real PLL clock behavior of these
15558 processors. Please refer to the hardware specification for detailed
15559 information of the corresponding processors.
15560 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15562 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
15563 Author: roy zang <tie-fei.zang@freescale.com>
15564 Date: Mon Dec 4 14:46:23 2006 +0800
15566 Remove the static MAC address, ip address, server ip, netmask and
15567 gateway ip for network setting.
15568 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15570 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
15571 Author: roy zang <tie-fei.zang@freescale.com>
15572 Date: Mon Dec 4 14:33:08 2006 +0800
15574 Remove the duplicate memory test code for mpc744ihpc2 board.
15575 If a memory test is needed, please use the functions in
15576 post/memory.c or memtest command.
15577 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15579 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
15580 Author: roy zang <tie-fei.zang@freescale.com>
15581 Date: Fri Dec 1 19:01:25 2006 +0800
15583 Fix the exception occuring in RAM table search issue.
15584 The original search_one_table() function code can only processes the search
15585 for the exception occurring in FLASH/ROM, because the exception and fixup
15586 table usually locate in FLASH. If the exception address is also in
15587 FLASH, it will be OK.
15588 If the exception occurs in RAM, after the u-boot relocation, a
15589 relocation offset should be added.
15591 clean up the code in cpu/74xx_7xx/cpu.c
15593 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15595 commit ee311214e0d216f904feea269599d0934bf71f23
15596 Author: roy zang <tie-fei.zang@freescale.com>
15597 Date: Fri Dec 1 11:47:36 2006 +0800
15599 Clean up the code according to codestyle:
15600 (1) remove some C++ comments.
15601 (2) remove trailing white space.
15602 (3) remove trailing empty line.
15603 (4) Indentation by table.
15604 (5) remove {} in one line condition.
15605 (6) add space before '(' in function call.
15606 Remove some weird printf () output.
15607 Add necessary comments.
15608 Modified Makefile to support building in a separate directory.
15610 commit dd520bf314c7add4183c5191692180f576f96b60
15611 Author: Wolfgang Denk <wd@pollux.denx.de>
15612 Date: Thu Nov 30 18:02:20 2006 +0100
15616 commit 8d9a8610b8256331132227e9e6585c6bd5742787
15617 Author: Wolfgang Denk <wd@pollux.denx.de>
15618 Date: Thu Nov 30 01:54:07 2006 +0100
15620 Code cleanup. Update CHANGELOG.
15622 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
15623 Author: Grant Likely <grant.likely@secretlab.ca>
15624 Date: Wed Nov 29 16:23:42 2006 +0100
15626 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
15628 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
15629 not the XLB frequency.
15631 This patch depends on the previous patches for MPC52xx device tree support
15633 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15634 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
15636 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
15637 Author: Stefan Roese <sr@denx.de>
15638 Date: Wed Nov 29 15:42:37 2006 +0100
15640 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
15642 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
15643 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
15644 quite similar and share the same board directory "prodrive/p3mx"
15645 and the same config file "p3mx.h".
15647 Signed-off-by: Stefan Roese <sr@denx.de>
15649 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
15650 Author: Stefan Roese <sr@denx.de>
15651 Date: Wed Nov 29 12:53:15 2006 +0100
15653 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
15655 In the bootvx command the load address was only read from the env
15656 variable "loadaddr" and not optionally passed as paramter as described
15657 in the help. This is fixed with this patch. The behaviour is now the
15658 same as in the bootelf command.
15660 Signed-off-by: Stefan Roese <sr@denx.de>
15662 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
15663 Author: Stefan Roese <sr@denx.de>
15664 Date: Wed Nov 29 12:03:57 2006 +0100
15666 [PATCH] include/ppc440.h minor error affecting interrupts
15668 Fixed include/ppc440.c for UIC address Bug
15670 Corrects bug affecting the addresses for the universal interrupt
15671 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
15673 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
15674 Signed-off-by: Stefan Roese <sr@denx.de>
15676 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
15677 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
15678 Date: Tue Nov 28 16:17:27 2006 -0600
15680 Make fsl-i2c not conflict with SOFT I2C
15682 Signed-off-by: Timur Tabi <timur@freescale.com>
15684 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
15685 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
15686 Date: Tue Nov 28 16:17:18 2006 -0600
15688 Fix I2C master address initialization.
15690 Signed-off-by: Timur Tabi <timur@freescale.com>
15692 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
15693 Author: Kim Phillips <kim.phillips@freescale.com>
15694 Date: Tue Nov 28 23:31:19 2006 -0600
15696 Assign maintainers for mpc8349emds and mpc8360emds
15698 Dave for mpc8360emds, and me for mpc8349emds.
15700 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
15701 Author: Kim Phillips <kim.phillips@freescale.com>
15702 Date: Tue Nov 28 23:28:33 2006 -0600
15704 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
15706 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
15707 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
15709 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
15710 Author: Timur Tabi <timur@freescale.com>
15711 Date: Tue Nov 28 12:09:35 2006 -0600
15713 mpc83xx: Miscellaneous code style fixes
15715 Implement various code style fixes and similar changes.
15717 Signed-off-by: Timur Tabi <timur@freescale.com>
15719 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
15720 Author: Stefan Roese <sr@denx.de>
15721 Date: Tue Nov 28 17:55:49 2006 +0100
15723 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
15725 This patch adds the code and configuration necessary to boot with an
15726 arch/powerpc Linux kernel.
15728 Signed-off-by: Grant Likely <grant.likely@gmail.com>
15729 Acked-by: Jon Loeliger <jdl@freescale.com>
15731 commit e732faec95a83cb468b4850ae807c8301dde8f6a
15732 Author: Stefan Roese <sr@denx.de>
15733 Date: Tue Nov 28 16:09:24 2006 +0100
15735 [PATCH] PPC4xx: 440SP Rev. C detection added
15737 Signed-off-by: Stefan Roese <sr@denx.de>
15739 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
15740 Author: Stefan Roese <sr@denx.de>
15741 Date: Tue Nov 28 11:04:45 2006 +0100
15743 [PATCH] nand: Fix patch merge problem
15745 Signed-off-by: Stefan Roese <sr@denx.de>
15747 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
15748 Author: Stefan Roese <sr@denx.de>
15749 Date: Tue Nov 28 11:04:45 2006 +0100
15751 [PATCH] nand: Fix patch merge problem
15753 Signed-off-by: Stefan Roese <sr@denx.de>
15755 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
15756 Author: Wolfgang Denk <wd@pollux.denx.de>
15757 Date: Mon Nov 27 22:53:53 2006 +0100
15761 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
15762 Author: Stefan Roese <sr@denx.de>
15763 Date: Mon Nov 27 17:43:25 2006 +0100
15765 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
15767 Patch below corrects the setting of the zmiifer register, it was
15768 overwritting the register rather than ORing the settings.
15770 Signed-off-by: Neil Wilson <NWilson@airspan.com>
15771 Signed-off-by: Stefan Roese <sr@denx.de>
15773 commit d1a72545296800b7e219f93104ad5836f0003d66
15774 Author: Stefan Roese <sr@denx.de>
15775 Date: Mon Nov 27 17:34:10 2006 +0100
15777 [PATCH] Select NAND embedded environment from board configuration
15779 The current NAND Bootloader setup forces the environment
15780 variables to be in line with the bootloader. This change
15781 enables the configuration to be made in the board include
15782 file instead so that it can be individually enabled.
15784 Signed-off-by: Nick Spence <nick.spence@freescale.com>
15785 Signed-off-by: Stefan Roese <sr@denx.de>
15787 commit 15784862857c3c2214498defcfed84ff137fb81e
15788 Author: Stefan Roese <sr@denx.de>
15789 Date: Mon Nov 27 17:22:19 2006 +0100
15791 [PATCH] nand_wait() timeout fixes
15793 Two fixes for the nand_wait() function in
15794 drivers/nand/nand_base.c:
15796 1. Use correct timeouts. The original timeouts in Linux
15797 source are 400ms and 20ms not 40s and 20s
15799 2. Return correct error value in case of timeout. 0 is
15802 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
15803 Signed-off-by: Stefan Roese <sr@denx.de>
15805 commit da5553b095bf04f4f109ad7e565dae3aba47b230
15806 Author: Stefan Roese <sr@denx.de>
15807 Date: Mon Nov 27 17:04:06 2006 +0100
15809 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
15811 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
15812 arguments to bootm. It removes the getenv("disable_of") test that used
15813 to be used for this purpose.
15815 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15816 Acked-by: Jon Loeliger <jdl@freescale.com>
15818 commit a9398e018593782c5fa7d0741955fc1256b34c1e
15819 Author: Wolfgang Denk <wd@pollux.denx.de>
15820 Date: Mon Nov 27 15:32:42 2006 +0100
15822 Minor code cleanup. Update CHANGELOG.
15824 commit 1729b92cde575476684bffe819d0b7791b57bff2
15825 Author: Stefan Roese <sr@denx.de>
15826 Date: Mon Nov 27 14:52:04 2006 +0100
15828 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
15830 Signed-off-by: Stefan Roese <sr@denx.de>
15832 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
15833 Author: Stefan Roese <sr@denx.de>
15834 Date: Mon Nov 27 14:49:51 2006 +0100
15836 [PATCH] alpr: remove unused board specific flash driver
15838 Signed-off-by: Stefan Roese <sr@denx.de>
15840 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
15841 Author: Stefan Roese <sr@denx.de>
15842 Date: Mon Nov 27 14:48:41 2006 +0100
15844 [PATCH] 4xx: Fix problem with board specific reset code
15846 Signed-off-by: Stefan Roese <sr@denx.de>
15848 commit ec0c2ec725aec9524a177a77ce75559e644a931a
15849 Author: Stefan Roese <sr@denx.de>
15850 Date: Mon Nov 27 14:46:06 2006 +0100
15852 [PATCH] Remove testing 4xx enet PHY setup
15854 Signed-off-by: Stefan Roese <sr@denx.de>
15856 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
15857 Author: Stefan Roese <sr@denx.de>
15858 Date: Mon Nov 27 14:12:17 2006 +0100
15860 [PATCH] Update Prodrive ALPR board support (440GX)
15862 Signed-off-by: Stefan Roese <sr@denx.de>
15864 commit 58b485776698c3d71ec5a215e392123b4c15afa3
15865 Author: Markus Klotzbuecher <mk@denx.de>
15866 Date: Mon Nov 27 11:51:21 2006 +0100
15868 Add a small README with information on the generic ohci driver.
15870 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
15871 Author: Markus Klotzbuecher <mk@denx.de>
15872 Date: Mon Nov 27 11:46:46 2006 +0100
15874 Fix some endianness issues related to the generic ohci driver
15876 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
15877 Author: Markus Klotzbuecher <mk@denx.de>
15878 Date: Mon Nov 27 11:44:58 2006 +0100
15880 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
15881 to choose between the old and the generic OHCI drivers.
15883 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
15884 Author: Markus Klotzbuecher <mk@denx.de>
15885 Date: Mon Nov 27 11:43:09 2006 +0100
15887 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
15888 and adapted board configs TQM5200 and yosemite accordingly. This commit
15889 also makes the maximum number of root hub ports configurable
15890 (CFG_USB_OHCI_MAX_ROOT_PORTS).
15892 commit 78d620ebb5871d252270dedfad60c6568993b780
15893 Author: Wolfgang Denk <wd@atlas.denx.de>
15894 Date: Thu Nov 23 22:58:58 2006 +0100
15896 Updates for TQM5200 modules:
15897 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
15898 - simplify "udate" definitions
15900 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
15901 Author: Stefan Roese <sr@denx.de>
15902 Date: Wed Nov 22 13:20:50 2006 +0100
15904 [PATCH] PPC4xx start.S: Fix for processor errata
15906 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
15907 errata 1.12: 440_33 by moving patch up in code.
15909 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
15910 Signed-off-by: Stefan Roese <sr@denx.de>
15912 commit 4ef6251403f637841000e0fef9e832aa01339822
15913 Author: Stefan Roese <sr@denx.de>
15914 Date: Mon Nov 20 20:39:52 2006 +0100
15916 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
15918 Signed-off-by: Stefan Roese <sr@denx.de>
15920 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
15921 Author: Wolfgang Denk <wd@pollux.denx.de>
15922 Date: Mon Nov 20 10:28:30 2006 +0100
15926 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
15927 Author: Stefan Roese <sr@denx.de>
15928 Date: Mon Nov 13 13:55:24 2006 +0100
15930 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
15932 * Adds support for AMD command set Top Boot flash geometry reversal
15933 * Adds support for reading JEDEC Manufacturer ID and Device ID
15934 * Adds support for displaying command set, manufacturer id and
15935 device ids (flinfo)
15936 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
15937 * Removes outdated change history (refer to git log instead)
15939 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
15940 Signed-off-by: Stefan Roese <sr@denx.de>
15942 commit b21b511d4c50408f4853f46f06b601272196223f
15943 Author: Wolfgang Denk <wd@pollux.denx.de>
15944 Date: Sun Nov 12 21:13:23 2006 +0100
15948 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
15949 Author: Bartlomiej Sieka <tur@semihalf.com>
15950 Date: Sat Nov 11 22:48:22 2006 +0100
15952 Disable the watchdog in the default config for the V38B board.
15954 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
15955 Author: Bartlomiej Sieka <tur@semihalf.com>
15956 Date: Sat Nov 11 22:43:00 2006 +0100
15958 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
15959 group is enabled for USB earlier (in cpu_init_f() instead of
15960 usb_lowlevel_init()).
15962 commit 91650b3e4de688038d4f71279c44858e3e2c6870
15963 Author: Wolfgang Denk <wd@pollux.denx.de>
15964 Date: Mon Nov 6 17:06:36 2006 +0100
15966 Sequential accesses to non-existent memory must be synchronized,
15967 at least on G2 cores.
15969 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
15971 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
15972 Author: Timur Tabi <timur@freescale.com>
15973 Date: Fri Nov 3 19:15:00 2006 -0600
15975 mpc83xx: Update 83xx to use fsl_i2c.c
15977 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
15978 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
15979 Added multiple I2C bus support to fsl_i2c.c.
15981 Signed-off-by: Timur Tabi <timur@freescale.com>
15983 commit d239d74b1c937984bc519083a8e7de373a390f06
15984 Author: Timur Tabi <timur@freescale.com>
15985 Date: Fri Nov 3 12:00:28 2006 -0600
15987 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
15989 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
15990 tree matches the other 8xxx trees.
15992 Signed-off-by: Timur Tabi <timur@freescale.com>
15994 commit f7fb2e703ec9688541416962724adff70a7322cb
15995 Author: Kim Phillips <kim.phillips@freescale.com>
15996 Date: Thu Nov 2 19:47:11 2006 -0600
15998 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
16000 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
16001 Author: Dave Liu <daveliu@freescale.com>
16002 Date: Thu Nov 2 18:05:50 2006 -0600
16004 mpc83xx: Fix the incorrect dcbz operation
16006 The 834x rev1.x silicon has one CPU5 errata.
16008 The issue is when the data cache locked with
16009 HID0[DLOCK], the dcbz instruction looks like no-op inst.
16011 The right behavior of the data cache is when the data cache
16012 Locked with HID0[DLOCK], the dcbz instruction allocates
16015 The 834x rev3.0 and later and 8360 have not this bug inside.
16017 So, when 834x rev3.0/8360 are working with ECC, the dcbz
16018 instruction will corrupt the stack in cache, the processor will
16021 However, the 834x rev1.x can work with ECC with these code,
16022 because the sillicon has this cache bug. The dcbz will not
16023 corrupt the stack in cache.
16024 Really, it is the fault code running on fault sillicon.
16026 This patch fix the incorrect dcbz operation. Instead of
16027 CPU FP writing to initialise the ECC.
16030 * Fix the incorrect dcbz operation instead of CPU FP
16031 writing to initialise the ECC memory. Otherwise, it
16032 will corrupt the stack in cache, The processor will checkstop
16035 Signed-off-by: Dave Liu <daveliu@freescale.com>
16037 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
16038 Author: Kim Phillips <kim.phillips@freescale.com>
16039 Date: Wed Nov 1 00:10:40 2006 -0600
16041 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
16043 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
16044 STDOUT_PATH configuration bits to mpc8349emds,
16045 mpc8349itx, and mpc8360emds board code.
16047 redo environment to use bootm with the fdtaddr
16048 for booting ARCH=powerpc kernels by default,
16049 and provide default fdtaddr values.
16051 commit 48041365b3420589ad464ebc7752e0053538b729
16052 Author: Kim Phillips <kim.phillips@freescale.com>
16053 Date: Wed Nov 1 00:07:25 2006 -0600
16055 mpc83xx: change ft code to modify local-mac-address property
16057 Update 83xx OF code to update local-mac-address properties
16058 for ethernet instead of the obsolete 'address' property.
16060 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
16061 Author: Timur Tabi <timur@freescale.com>
16062 Date: Tue Oct 31 21:23:16 2006 -0600
16064 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
16066 This patch also adds an improved I2C set_speed(), which handles all clock
16069 Signed-off-by: Timur Tabi <timur@freescale.com>
16071 commit ac4b5622ce050b5ee1e154b98df630d778661632
16072 Author: Dave Liu <daveliu@freescale.com>
16073 Date: Tue Oct 31 19:54:59 2006 -0600
16075 mpc83xx: add the README.mpc8360emds
16077 add doc/README.mpc8360emds to accompany the new board support
16079 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
16080 Author: Dave Liu <daveliu@freescale.com>
16081 Date: Fri Nov 3 12:11:15 2006 -0600
16083 mpc83xx: add QE ethernet support
16085 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
16087 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
16088 Author: Dave Liu <daveliu@freescale.com>
16089 Date: Fri Nov 3 19:33:44 2006 -0600
16091 mpc83xx: Add MPC8360EMDS basic board support
16093 Add support for the Freescale MPC8360EMDS board.
16094 Includes DDR, DUART, Local Bus, PCI.
16096 commit 23892e49352de74f7fac36ff90bb1be143d195e3
16097 Author: Dave Liu <daveliu@freescale.com>
16098 Date: Tue Oct 31 19:30:40 2006 -0600
16100 mpc83xx: add the QUICC Engine (QE) immap file
16102 common QE immap file. Also required for 8360.
16104 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
16105 Author: Dave Liu <daveliu@freescale.com>
16106 Date: Tue Oct 31 19:25:38 2006 -0600
16108 mpc83xx: Add 8360 specifics to 83xx immap
16110 Mainly add QE device dependencies, with appropriate 8360 protection.
16113 commit 988833324a7fda482c8ac3ca23eb539f8232e404
16114 Author: Timur Tabi <timur@freescale.com>
16115 Date: Tue Oct 31 19:14:41 2006 -0600
16117 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
16119 PREREQUISITE PATCHES:
16121 * This patch can only be applied after the following patches have been applied:
16123 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
16124 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
16128 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
16129 the clock for the 2nd USB board (Linux kernel will hang otherwise),
16130 and fix the CONFIG_BOOTARGS macro.
16132 Signed-off-by: Timur Tabi <timur@freescale.com>
16134 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
16135 Author: Timur Tabi <timur@freescale.com>
16136 Date: Tue Oct 31 18:44:42 2006 -0600
16138 mpc83xx: Add support for the MPC8349E-mITX
16140 PREREQUISITE PATCHES:
16142 * This patch can only be applied after the following patches have been applied:
16144 1) DNX#2006090742000024 "Add support for multiple I2C buses"
16145 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
16146 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
16147 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
16148 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
16152 * Add support for the Freescale MPC8349E-mITX reference design platform.
16153 The second TSEC (Vitesse 7385 switch) is not supported at this time.
16155 Signed-off-by: Timur Tabi <timur@freescale.com>
16157 commit 183da6d9b446cc12123455844ad1187e2375626f
16158 Author: Ben Warren <bwarren@qstreams.com>
16159 Date: Tue Sep 12 10:15:53 2006 -0400
16161 Additional MPC8349 support for multibus i2c
16165 Here is a patch for a file that was accidentally left out of a previous
16168 It accompanies the patch with ticket DNX#2006090742000024
16171 Change PCI initialization to use new multi-bus I2C API.
16176 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
16177 Author: Ben Warren <bwarren@qstreams.com>
16178 Date: Thu Sep 7 16:51:04 2006 -0400
16180 Multi-bus I2C implementation of MPC834x
16184 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
16185 family and the MPC8349EMDS board in particular.
16186 This patch requires Patch 1 (Add support for multiple I2C buses).
16187 Testing was performed on a 533MHz board.
16189 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
16191 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16194 Implemented driver-level code to support two I2C buses on the
16195 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
16196 are 50kHz, 100kHz and 400kHz on each bus.
16201 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
16202 Author: Ben Warren <bwarren@qstreams.com>
16203 Date: Thu Sep 7 16:50:54 2006 -0400
16205 Add support for multiple I2C buses
16209 Attached is a patch providing support for multiple I2C buses at the
16210 command level. The second part of the patch includes an implementation
16211 for the MPC834x CPU and MPC8349EMDS board.
16213 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
16215 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16219 1. Include new 'i2c' command (based on USB implementation) using
16220 CONFIG_I2C_CMD_TREE.
16222 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
16223 the commands to change bus number and speed are only available under the
16224 new 'i2c' command mentioned in the first bullet.
16226 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
16227 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
16228 of an array of bus-device pairs. Otherwise, it is an array of uchar.
16231 Added new 'i2c' master command for all I2C interaction. This is
16232 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
16233 setting I2C bus speed as well as changing the active bus if the board
16234 has more than one (conditionally compiled with
16235 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
16241 commit bed85caf872714ebf53013967a695c9d63acfc68
16242 Author: Timur Tabi <timur@freescale.com>
16243 Date: Tue Oct 31 18:13:36 2006 -0600
16245 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
16249 * Errata DDR6, which affects all current MPC 834x processors, lists changes
16250 required to maintain compatibility with various types of DDR memory. This
16251 patch implements those changes.
16253 Signed-off-by: Timur Tabi <timur@freescale.com>
16255 commit afd6e470f639883002c7c59d562690a5cb0f4865
16256 Author: Timur Tabi <timur@freescale.com>
16257 Date: Wed Oct 25 18:45:23 2006 -0500
16259 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
16261 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
16262 Author: Timur Tabi <timur@freescale.com>
16263 Date: Tue Aug 22 17:07:00 2006 -0500
16265 mpc83xx: Add support for variable flash memory sizes on 83xx systems
16269 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
16270 window registers, instead of using a hard-coded value of 8MB.
16272 Signed-off-by: Timur Tabi <timur@freescale.com>
16274 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
16275 Author: Tanya Jiang <tanya.jiang@freescale.com>
16276 Date: Thu Aug 3 18:38:13 2006 +0800
16278 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
16280 Unified TQM834x variable names with 83xx and consolidated macro
16281 in preparation for the 8360 and other upcoming 83xx devices.
16283 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
16285 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
16286 Author: Dave Liu <daveliu@freescale.com>
16287 Date: Wed Oct 25 14:41:21 2006 -0500
16289 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
16291 Incorporated the common unified variable names and the changes in preparation
16292 for releasing mpc8360 patches.
16294 Signed-off-by: Dave Liu <daveliu@freescale.com>
16296 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
16297 Author: Tanya Jiang <tanya.jiang@freescale.com>
16298 Date: Thu Aug 3 18:36:02 2006 +0800
16300 mpc83xx: Fix missing build for mpc8349emds pci.c
16302 Make pci build for mpc8349emds
16304 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
16306 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
16307 Author: Tanya Jiang <tanya.jiang@freescale.com>
16308 Date: Thu Aug 3 18:39:49 2006 +0800
16310 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
16312 Removed unused file resetvec.S for mpc83xx cpu
16314 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
16316 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
16317 Author: Nick Spence <Nick.Spence@freescale.com>
16318 Date: Sat Sep 30 00:32:59 2006 -0700
16320 NAND Flash verify across block boundaries
16322 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
16324 and the write crosses a block boundary. The pointer to the verification
16325 buffer (bufstart) is not being updated to reflect the starting of the
16327 block so the verification of the second block fails.
16331 * Fix NAND FLASH page verification across block boundaries
16333 commit f484dc791a3932537213c43c654cc1295c64b84c
16334 Author: Nick Spence <nick.spence@freescale.com>
16335 Date: Thu Sep 7 07:39:46 2006 -0700
16337 Added RGMII support to the TSECs and Marvell 881111 Phy
16339 Added a phy initialization to adjust the RGMII RX and TX timing
16340 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
16342 Signed-off-by: Nick Spence <nick.spence@freescale.com>
16344 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
16345 Author: roy zang <tie-fei.zang@freescale.com>
16346 Date: Fri Nov 3 13:10:00 2006 +0800
16348 Remove some unused CFG define.
16349 undef CFG_DRAM_TEST
16351 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
16352 Author: roy zang <tie-fei.zang@freescale.com>
16353 Date: Fri Nov 3 13:07:36 2006 +0800
16355 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
16356 Both work. 0xFF000000 seems more reasonable.
16358 commit c59200443072353044aa4bf737a5a60f9a9af231
16359 Author: Wolfgang Denk <wd@pollux.denx.de>
16360 Date: Thu Nov 2 15:15:01 2006 +0100
16362 Release U-Boot 1.1.6
16364 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
16365 Author: roy zang <tie-fei.zang@freescale.com>
16366 Date: Thu Nov 2 19:14:48 2006 +0800
16368 This patch comes from Yuli's posted patch on 8/8/2006
16369 titled "CFI Driver Little-Endian write Issue".
16371 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
16373 If that patch applied, please discard this one.
16374 Until now , I do not see his patch is applied. So please apply this one.
16376 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
16377 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16379 commit b825f158e449e1e9cf74c08e572955e122394c96
16380 Author: roy zang <tie-fei.zang@freescale.com>
16381 Date: Thu Nov 2 19:12:31 2006 +0800
16383 Tsi108 on chip i2c support.
16385 The i2c Interface provides a master-only, serial interface that can be
16386 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
16389 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16390 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16392 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
16393 Author: roy zang <tie-fei.zang@freescale.com>
16394 Date: Thu Nov 2 19:11:06 2006 +0800
16396 Tsi108 on chip pci controller support.
16398 If there is no pci card, the tsi108/109 pci configure read will
16399 cause a machine check exception to the processor. PCI error should
16400 also be cleared after the read.
16402 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16403 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16405 commit d1927cee977126e547ceeba23e4f978f377cfb8f
16406 Author: roy zang <tie-fei.zang@freescale.com>
16407 Date: Thu Nov 2 19:08:55 2006 +0800
16409 Tundra tsi108 on chip Ethernet controller support.
16411 The following is a brief description of the Ethernet controller:
16412 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
16413 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
16414 to manage the two physical connection devices (PHYs). Each Ethernet port
16415 has its own statistics monitor that tracks and reports key interface
16416 statistics. Each port supports a 256-entry hash table for address
16417 filtering. In addition, each port is bridged to the Switch Fabric
16418 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
16420 Each Ethernet port also has a pair of internal Ethernet DMA channels to
16421 support the transmit and receive data flows. The Ethernet DMA channels
16422 use descriptors set up in memory, the memory map of the device, and
16423 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
16424 handles arbitration for the Switch Fabric. The Controller also
16425 has a register businterface for register accesses and status monitor
16428 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
16429 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
16430 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
16431 data flows to and from the Ethernet Controller through the Switch Fabric.
16433 Each Ethernet port uses its transmit and receive DMA channels to manage
16434 data flows through buffer descriptors that are predefined by the
16435 system (the descriptors can exist anywhere in the system memory map).
16436 These descriptors are data structures that point to buffers filled
16437 with data ready to transmit over Ethernet, or they point to empty
16438 buffers ready to receive data from Ethernet.
16440 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16441 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16443 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
16444 Author: roy zang <tie-fei.zang@freescale.com>
16445 Date: Thu Nov 2 19:01:33 2006 +0800
16447 Tundra tsi108 header file.
16449 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
16450 PowerPC processors that offers numerous system interconnect options for
16451 embedded application designers. The Tsi108 can interconnect 60x or
16452 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
16453 and Flash. Provided the macro define for tsi108 chip.
16455 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16456 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16458 commit 87c4db09699c6b89176b31004afcb83eb1585d47
16459 Author: roy zang <tie-fei.zang@freescale.com>
16460 Date: Thu Nov 2 18:59:15 2006 +0800
16462 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16463 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
16465 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16466 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16468 commit 27801b8ab11c61b577e45742a515bb3b23b80241
16469 Author: roy zang <tie-fei.zang@freescale.com>
16470 Date: Thu Nov 2 18:57:21 2006 +0800
16472 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16473 Make ,config.mk and link file for the mpc7448hpc2 board.
16475 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16476 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16478 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
16479 Author: roy zang <tie-fei.zang@freescale.com>
16480 Date: Thu Nov 2 18:55:04 2006 +0800
16482 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16483 The mpc7448hpc2 board support header file.
16485 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16486 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16488 commit 625bb5ddb50b243f931262ca8c46956409471917
16489 Author: roy zang <tie-fei.zang@freescale.com>
16490 Date: Thu Nov 2 18:52:21 2006 +0800
16492 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16493 The mpc7448hpc2 board support low level assemble language init code.
16495 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16496 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16498 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
16499 Author: roy zang <tie-fei.zang@freescale.com>
16500 Date: Thu Nov 2 18:49:51 2006 +0800
16502 General code modification for mpc7448hpc2 board support.
16503 1. Add 7447A and 7448 processor support.
16504 2. Add the following flags.
16506 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
16507 (such as by switch on board), this flag should be set.
16509 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
16510 relocates to RAM, this flag should be set.
16512 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
16513 system hang in exception, this flag should be set.
16515 There is a design issue for tsi108/109 pci configure read. When pci scan
16516 the slots, if there is no pci card, the tsi108/9 will cause a machine
16517 check exception for mpc7448 processor.
16519 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16520 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16522 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
16523 Author: roy zang <tie-fei.zang@freescale.com>
16524 Date: Thu Nov 2 18:34:47 2006 +0800
16526 Add README file for mpc7448hpc2 board.
16527 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16529 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
16530 Author: Bartlomiej Sieka <tur@semihalf.com>
16531 Date: Wed Nov 1 02:04:38 2006 +0100
16533 Finish up support for MarelV38B board
16534 - add watchdog support
16535 - enable GPIO_WKUP_7 pin for input
16538 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
16539 Author: Bartlomiej Sieka <tur@semihalf.com>
16540 Date: Wed Nov 1 01:45:46 2006 +0100
16542 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
16543 * remove warnings when compiling ethaddr.c
16544 * adjust linker script (fixes a crash resulting from incorrect
16545 definition of __u_boot_cmd_start)
16546 - Some MarelV38B code cleanup.
16548 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
16549 Author: Bartlomiej Sieka <tur@semihalf.com>
16550 Date: Wed Nov 1 01:38:16 2006 +0100
16552 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
16553 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
16554 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
16555 MPC5XXX_WU_GPIO_DATA_O for affected boards.
16557 - Add defintions for some MPC5XXX GPIO pins.
16559 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
16560 Author: Bartlomiej Sieka <tur@semihalf.com>
16561 Date: Wed Nov 1 01:34:29 2006 +0100
16563 Changed MarelV38B board make target to lowercase. Config file cleanup.
16565 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
16566 Author: Wolfgang Denk <wd@pollux.denx.de>
16567 Date: Sun Oct 29 01:03:51 2006 +0200
16569 Automatically adjust ARFLAGS so "make -s" is really silent.
16571 commit fae684e89844856383bdf101440889557df3e6b1
16572 Author: Stefan Roese <sr@denx.de>
16573 Date: Sat Oct 28 16:45:00 2006 +0200
16575 [PATCH] omap925.c: Remove unused functions
16577 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16578 Signed-off-by: Stefan Roese <sr@denx.de>
16580 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
16581 Author: Stefan Roese <sr@denx.de>
16582 Date: Sat Oct 28 17:12:58 2006 +0200
16584 [PATCH] Add some missing machtypes for netstar & voiceblue boards
16586 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
16589 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16590 Signed-off-by: Stefan Roese <sr@denx.de>
16592 commit 856f054410cef52d868feb330168b2a4c4091328
16593 Author: Stefan Roese <sr@denx.de>
16594 Date: Sat Oct 28 15:55:52 2006 +0200
16596 [PATCH] NAND: Partition name support added to NAND subsystem
16598 chpart, nboot and NAND subsystem related commands now accept also partition
16599 name to specify offset.
16601 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16602 Signed-off-by: Stefan Roese <sr@denx.de>
16604 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
16605 Author: Wolfgang Denk <wd@pollux.denx.de>
16606 Date: Sat Oct 28 02:29:44 2006 +0200
16610 commit 2751a95abd1b96911081c357e96a12fa97b40dee
16611 Author: Wolfgang Denk <wd@pollux.denx.de>
16612 Date: Sat Oct 28 02:29:14 2006 +0200
16614 Enable commandline editing and hush shell on all TQM boards.
16616 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
16617 Author: Wolfgang Denk <wd@pollux.denx.de>
16618 Date: Sat Oct 28 02:28:02 2006 +0200
16620 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
16622 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
16623 Author: Wolfgang Denk <wd@denx.de>
16624 Date: Sat Oct 28 01:14:32 2006 +0200
16626 Check for illegal character '=' in environment variable names.
16628 Make sure the string passed as variable name does not contain a '='
16629 character. This not only prevents the common error or typing
16630 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
16631 also closes a backdoor which allowed to delete write-protected
16632 environment variables, for example by using "setenv ethaddr=".
16634 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
16635 Author: Wolfgang Denk <wd@pollux.denx.de>
16636 Date: Sat Oct 28 00:38:39 2006 +0200
16638 Minor code cleanup.
16640 commit e11887a77d81077416a2d1c5e0354916fee8c034
16641 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16642 Date: Thu Oct 26 17:55:31 2006 +0200
16644 Don't pass any debug options directly to the assembler
16646 When passing the -g option to gcc, gcc automatically selects a
16647 suitable --g<format> option to pass on to the assembler.
16648 Thus, there's no point in forcing a specific debug option on the
16649 assembler using the -Wa mechanism.
16651 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16653 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
16654 Author: Jon Loeliger <jdl@freescale.com>
16655 Date: Fri Oct 27 07:47:22 2006 -0500
16657 MPC86xx: Cleaned up unused and conditionally used local variables.
16659 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16661 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
16662 Author: Wolfgang Denk <wd@pollux.denx.de>
16663 Date: Fri Oct 27 11:55:21 2006 +0200
16665 Fix "ar" flags in some Makefiles to allow for silent "make -s"
16667 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
16668 Author: Ben Warren <bwarren@qstreams.com>
16669 Date: Thu Oct 26 14:38:25 2006 -0400
16671 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
16672 to a TSEC (e.g. a switch is connected via RMII) or
16673 if the PHY is defective/incorrectly configured.
16675 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16677 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
16678 Author: Ben Warren <bwarren@qstreams.com>
16679 Date: Thu Oct 26 14:38:25 2006 -0400
16681 Fix TSEC driver: avoid crashes if PHY is not attached
16682 to a TSEC (e.g. a switch is connected via RMII) or
16683 if the PHY is defective/incorrectly configured.
16685 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16687 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
16688 Author: Wolfgang Denk <wd@pollux.denx.de>
16689 Date: Thu Oct 26 16:24:31 2006 +0200
16693 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
16694 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16695 Date: Wed Oct 25 15:48:59 2006 +0200
16697 Finish up support for the ATSTK1000/ATSTK1002 boards
16699 Add atstk1002_config target to Makefile and move the AVR32 section
16700 down below Blackfin so that it doesn't end up in the middle of
16703 Drop the autogenerated linker script thing for now. Will have to
16704 revisit how to handle chips with different flash and RAM layout
16707 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16709 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
16710 Author: Kumar Gala <galak@kernel.crashing.org>
16711 Date: Tue Oct 24 23:47:37 2006 -0500
16713 Added support for Multi-Image files that contain a device tree
16715 If a Multi-Image file contains a third image we try to use it as a
16716 device tree. The device tree image is assumed to be uncompressed in the
16717 image file. We automatically allocate space for the device tree in memory
16718 and provide an 8k pad to allow more than a reasonable amount of growth.
16720 Additionally, a device tree that was contained in flash will now automatically
16721 get copied to system memory as part of boot. Previously an error was
16722 reported if one tried to boot a device tree that was in flash.
16724 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16726 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
16727 Author: Wolfgang Denk <wd@denx.de>
16728 Date: Tue Oct 24 21:35:55 2006 +0200
16730 Switch to automatically generated CHANGELOG file.
16731 (use "make CHANGELOG" to update it from time to time)
16733 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
16734 Author: Stefan Roese <sr@denx.de>
16735 Date: Tue Oct 24 18:06:48 2006 +0200
16737 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
16738 Patch by Stefan Roese, 24 Oct 2006
16740 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
16741 Author: Wolfgang Denk <wd@pollux.denx.de>
16742 Date: Tue Oct 24 17:24:55 2006 +0200
16744 Merge with /home/wd/git/u-boot/master
16746 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
16747 Author: Wolfgang Denk <wd@pollux.denx.de>
16748 Date: Tue Oct 24 15:32:57 2006 +0200
16752 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
16753 Author: Wolfgang Denk <wd@pollux.denx.de>
16754 Date: Tue Oct 24 14:51:36 2006 +0200
16756 Move atstk1000 files into vendor specific directory.
16757 Patch by Haavard Skinnemoen, 12 Sep 2006
16759 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
16760 Author: Wolfgang Denk <wd@pollux.denx.de>
16761 Date: Tue Oct 24 14:42:37 2006 +0200
16763 Add ATSTK1000 and ATSTK1002 board support
16764 Patch by Haavard Skinnemoen, 06 Sep 2006
16766 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
16769 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
16770 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
16771 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
16772 CompactFlash cards. For more information, please see this page:
16774 http://www.atmel.com/dyn/products/tools.asp?family_id=682
16776 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
16779 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16781 commit f93ae788c3640fcde5db383471d45548ff4060d0
16782 Author: Wolfgang Denk <wd@pollux.denx.de>
16783 Date: Tue Oct 24 14:31:24 2006 +0200
16785 Add common serial driver for Atmel AT32 and AT91 chips
16786 Patch by Haavard Skinnemoen, 06 Sep 2006
16788 This is a first attempt at creating a common serial driver for Atmel
16789 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
16790 be possible to support AT91RM9200 and other ARM-based chips with some
16791 minor modifications.
16793 There's nothing fundamentally AVR32-specific in this driver, but it
16794 does use some features which are currently only defined for the
16796 * pm_get_clock_freq: Obtain the clock frequency of a given domain
16797 * gd->console_uart: A "struct device" containing information about
16798 register mappings, gpio resources and clocks associated with the
16801 For more information about these features, please see the "AT32AP
16804 commit 72a087e04705c26cad982879ebd06b5281bf825a
16805 Author: Wolfgang Denk <wd@pollux.denx.de>
16806 Date: Tue Oct 24 14:27:35 2006 +0200
16808 Add AT32AP CPU and AT32AP7000 SoC support
16809 Patch by Haavard Skinnemoen, 06 Sep 2006
16811 This patch adds support for the AT32AP CPU family and the AT32AP7000
16812 chip, which is the first chip implementing the AVR32 architecture.
16814 The AT32AP CPU core is a high-performance implementation featuring a
16815 7-stage pipeline, separate instruction- and data caches, and a MMU.
16816 For more information, please see the "AVR32 AP Technical Reference":
16818 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
16820 In addition to this, the AT32AP7000 chip comes with a large set of
16821 integrated peripherals, many of which are shared with the AT91 series
16822 of ARM-based microcontrollers from Atmel. Full data sheet is
16825 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
16827 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16829 commit 7b64fef33c66be648826c0ff9758298ef13d0604
16830 Author: Wolfgang Denk <wd@pollux.denx.de>
16831 Date: Tue Oct 24 14:21:16 2006 +0200
16833 Add AVR32 architecture support
16834 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
16836 This patch adds common infrastructure code for the Atmel AVR32
16837 architecture. See doc/README.AVR32 for details.
16839 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16841 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
16842 Author: Wolfgang Denk <wd@pollux.denx.de>
16843 Date: Tue Oct 24 13:57:33 2006 +0200
16845 Use -g instead of -gstabs in AFLAGS_DEBUG
16846 Patch by Haavard Skinnemoen, 30 Aug 2006
16848 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
16849 matter what the target's preferred debugging format is. This patch
16850 simply replaces -gstabs with -g, so that the default debugging format
16851 for the architecture is used.
16853 commit 965829872169c2996023840d98e1d85ad148d629
16854 Author: Wolfgang Denk <wd@pollux.denx.de>
16855 Date: Tue Oct 24 13:55:18 2006 +0200
16857 Fix/workaround broken dependency handling with make 3.81
16858 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
16860 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
16861 Author: Marian Balakowicz <m8@semihalf.com>
16862 Date: Mon Oct 23 22:17:05 2006 +0200
16864 Fix sequoia separate object direcory building problems.
16866 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
16867 Author: Jon Loeliger <jdl@freescale.com>
16868 Date: Fri Oct 20 17:16:35 2006 -0500
16870 Use generic I2C register block on 85xx and 86xx.
16872 Replace private IMMAP I2C structures with generic reg block
16873 and allow 86xx to have multiple I2C device busses.
16875 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16877 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
16878 Author: Jon Loeliger <jdl@freescale.com>
16879 Date: Fri Oct 20 15:54:34 2006 -0500
16881 Fix compilation warnings on a few 85xx boards.
16883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16885 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
16886 Author: Jon Loeliger <jdl@freescale.com>
16887 Date: Fri Oct 20 15:50:15 2006 -0500
16889 Converted all 85xx boards to use a common FSL I2C driver.
16890 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
16891 And removed hard i2c path from a few u-boot.lds scipts too.
16892 Minor whitespace cleanups along the way.
16894 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16896 commit 4d45f69e362b05892c9e92a7907e5820995612aa
16897 Author: Jon Loeliger <jdl@freescale.com>
16898 Date: Thu Oct 19 12:02:24 2006 -0500
16900 Rewrite a series of goto statements as a sequences of
16901 conditional expressions instead.
16903 Use consistent return code 0/-1 for good/bad indicators.
16905 Include one fewer file if the driver isn't used at all.
16907 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16909 commit 7237c033b02fe295880435f1eb80819a0c987532
16910 Author: Jon Loeliger <jdl@freescale.com>
16911 Date: Thu Oct 19 11:02:16 2006 -0500
16913 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
16915 in an effort to begin to unify the umpteen FSL I2C drivers that
16916 are all otherwise very similar.
16918 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16920 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
16921 Author: Jon Loeliger <jdl@freescale.com>
16922 Date: Thu Oct 19 11:33:52 2006 -0500
16924 * Fix a bunch of compiler warnings for gcc 4.0
16926 Signed-off-by: Matthew McClintock <msm@freescale.com>
16928 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
16929 Author: Stefan Roese <sr@denx.de>
16930 Date: Tue Oct 17 06:14:31 2006 +0200
16932 Add monitor functions for indirect access to PPC440 DCR's
16933 Patch by Leonid Baryudin, 12 Oct 2006
16935 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
16936 Author: Jon Loeliger <jdl@freescale.com>
16937 Date: Fri Oct 13 16:47:53 2006 -0500
16939 Fixed leading whitespace issues.
16940 Removed spurious LAWAR thing.
16942 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16944 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
16945 Author: Jon Loeliger <jdl@freescale.com>
16946 Date: Thu Oct 12 10:42:36 2006 -0500
16948 Remove unneeded include files and local variable.
16950 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16952 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
16953 Author: Grant Likely <grant.likely@secretlab.ca>
16954 Date: Tue Oct 10 00:23:32 2006 -0600
16956 Fix possible uninitialized variable compiler warning.
16958 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
16959 do_bootm_linux() may be uninitialized. There is no possibility in the
16960 current code that len will get used uninitialized, but this fix follows
16961 the existing convention of setting both len and data to zero at the same
16964 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16966 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
16967 Author: Matthew McClintock <msm@freescale.com>
16968 Date: Wed Oct 11 15:13:01 2006 -0500
16970 * Fix a bunch of compiler warnings for gcc 4.0
16972 Signed-off-by: Matthew McClintock <msm@freescale.com>
16974 commit bf651baa365e5447246aad6a633ccd667cf24a39
16975 Author: Jon Loeliger <jdl@freescale.com>
16976 Date: Wed Oct 11 10:10:43 2006 -0500
16978 Move "ar" flags to config.mk to allow for silent "make -s"
16980 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
16981 Author: Jon Loeliger <jdl@freescale.com>
16982 Date: Tue Oct 10 17:19:03 2006 -0500
16984 Coding style changes to remove local varible blocks
16985 and reformat a bit nicer.
16987 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
16988 Author: Jon Loeliger <jdl@freescale.com>
16989 Date: Tue Oct 10 17:16:04 2006 -0500
16991 Fix whitespace issues.
16993 commit 7b382b7125f2397cce63253df62f183e3dfa2770
16994 Author: Jon Loeliger <jdl@freescale.com>
16995 Date: Tue Oct 10 17:14:45 2006 -0500
16997 Fix whitespace issues.
16999 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
17000 Author: Jon Loeliger <jdl@freescale.com>
17001 Date: Tue Oct 10 17:06:53 2006 -0500
17003 Fix whitespace issues.
17005 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
17006 Author: Jon Loeliger <jdl@freescale.com>
17007 Date: Tue Oct 10 17:03:43 2006 -0500
17009 Ran lindent and cleaned up whitespace issues.
17010 Format for 80-columns too.
17012 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
17013 Author: Jon Loeliger <jdl@freescale.com>
17014 Date: Tue Oct 10 17:02:22 2006 -0500
17016 Fix whitespace and 80-col issues.
17018 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
17019 Author: Stefan Roese <sr@denx.de>
17020 Date: Sat Oct 7 11:36:51 2006 +0200
17022 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
17023 Patch by Stefan Roese, 07 Oct 2006
17025 commit 5bc528fa4da751d472397b308137238a6465afd2
17026 Author: Stefan Roese <sr@denx.de>
17027 Date: Sat Oct 7 11:35:25 2006 +0200
17029 Update ALPR code (NAND support working now)
17030 Patch by Stefan Roese, 07 Oct 2006
17032 commit 77d5034847d328753b80c46b83f960a14a26f40e
17033 Author: Stefan Roese <sr@denx.de>
17034 Date: Sat Oct 7 11:33:03 2006 +0200
17036 Remove compile warnings in fpga code
17037 Patch by Stefan Roese, 07 Oct 2006
17039 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
17040 Author: Stefan Roese <sr@denx.de>
17041 Date: Sat Oct 7 11:30:52 2006 +0200
17043 Add CONFIG_BOARD_RESET to configure board specific reset function
17044 Patch by Stefan Roese, 07 Oct 2006
17046 commit f55df18187e7a45cb73fec4370d12135e6691ae1
17047 Author: John Traill <john.traill@freescale.com>
17048 Date: Fri Sep 29 08:23:12 2006 +0100
17050 Fix missing tCycle/modfreq calculation.
17052 Signed-off-by: John Traill <john.traill@freescale.com>
17054 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
17055 Author: Andy Fleming <afleming@freescale.com>
17056 Date: Wed Sep 13 10:33:35 2006 -0500
17058 Updated config headers to add default FDT-based booting
17060 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
17061 Author: Andy Fleming <afleming@freescale.com>
17062 Date: Wed Sep 13 10:34:18 2006 -0500
17064 Add support for eTSEC 3 & 4 on 8548 CDS
17066 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
17067 This will only work on rev 1.3 boards (but doesn't break older boards)
17068 * Cleaned up some comments to reflect the expanded role of tsec
17071 commit 084d648b109c8984f83674043c1a7fa3885ef801
17072 Author: Andy Fleming <afleming@freescale.com>
17073 Date: Wed Sep 13 10:33:56 2006 -0500
17075 Added code to support 2.6.18 PCI changes in u-boot
17077 * Added code to swizzle the IRQ map for the PCI
17079 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
17080 Author: Jon Loeliger <jdl@freescale.com>
17081 Date: Tue Sep 19 09:34:10 2006 -0500
17083 Modified makefile for new build mechanism.
17085 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17087 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
17088 Author: Jon Loeliger <jdl@freescale.com>
17089 Date: Thu Sep 14 08:40:36 2006 -0500
17091 Handle 86xx SVR values according to the new Reference Manual.
17092 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
17093 by the byte in bits 16-23 instead.
17094 Thanks to Jason Jin for noticing.
17096 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17098 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
17099 Author: Zhang Wei <wei.zhang@freescale.com>
17100 Date: Mon Aug 28 14:25:31 2006 +0800
17102 Fixed an OF-tree off-by-one bug when adding a new property name.
17103 This bug will cause the kernel booting to pause a long time.
17105 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17106 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
17108 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
17109 Author: Jon Loeliger <jdl@freescale.com>
17110 Date: Tue Aug 29 11:05:09 2006 -0500
17112 Remove trailing empty lines.
17114 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
17115 Author: Jon Loeliger <jdl@freescale.com>
17116 Date: Tue Aug 29 09:48:49 2006 -0500
17118 Remove bogus msync and use volatile asm.
17120 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
17121 Author: Jon Loeliger <jdl@freescale.com>
17122 Date: Tue Aug 29 08:17:14 2006 -0500
17124 Add myself as maintainer for MPC8641HPCN.
17126 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
17127 Author: Zhang Wei <wei.zhang@freescale.com>
17128 Date: Mon Aug 28 14:25:31 2006 +0800
17130 Fixed an OF-tree off-by-one bug when adding a new property name.
17131 This bug will cause the kernel booting to pause a long time.
17133 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17135 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
17136 Author: Haiying Wang <haiying.wang@freescale.com>
17137 Date: Fri Aug 25 14:38:34 2006 -0400
17139 Change ramdiskaddr and dtbaddr
17140 Remove PEX fluff commands.
17142 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17143 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17145 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
17146 Author: Matthew McClintock <msm@freescale.com>
17147 Date: Wed Aug 23 13:32:45 2006 -0500
17149 * Another small fix for booting with disable_of
17151 Signed-off-by: Matthew McClintock <msm@freescale.com>
17153 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
17154 Author: Jon Loeliger <jdl@freescale.com>
17155 Date: Wed Aug 23 11:04:43 2006 -0500
17157 Cleanup and lindent new AHCI driver.
17159 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
17160 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
17161 Date: Wed Aug 23 19:15:12 2006 +0800
17163 Add AHCI define and sata support for MPC8641HPCN board.
17165 Signed-off-by:Jason Jin<jason.jin@freescale.com>
17167 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
17168 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
17169 Date: Wed Aug 23 19:10:44 2006 +0800
17171 Add AHCI support to u-boot
17173 Add AHCI support in u-boot, enable the sata disk controllers which
17174 following the AHCI protocol.
17176 Signed-off-by:Jason Jin<jason.jin@freescale.com>
17178 commit d8ea2acf5f137cae99417df4f573d036ee384668
17179 Author: Zhang Wei <wei.zhang@freescale.com>
17180 Date: Wed Aug 23 17:54:32 2006 +0800
17182 Add dtb boot-up parameter to default boot commands.
17184 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17186 commit b93775c2036b99baa390ea425c4771895bbc63c4
17187 Author: Jon Loeliger <jdl@freescale.com>
17188 Date: Tue Aug 22 18:26:08 2006 -0500
17190 Cleanup even more poorly introduced whitespace.
17192 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
17193 Author: Jon Loeliger <jdl@freescale.com>
17194 Date: Tue Aug 22 18:07:00 2006 -0500
17196 Cleanup more poorly introduced whitespace.
17198 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
17199 Author: Jon Loeliger <jdl@freescale.com>
17200 Date: Tue Aug 22 17:54:05 2006 -0500
17202 Cleanup poorly introduced whitespace.
17204 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
17205 Author: Jon Loeliger <jdl@freescale.com>
17206 Date: Tue Aug 22 12:25:27 2006 -0500
17208 General indent and whitespace cleanups.
17210 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
17211 Author: Jon Loeliger <jdl@freescale.com>
17212 Date: Tue Aug 22 12:06:18 2006 -0500
17214 General indent and whitespace cleanups.
17216 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
17217 Author: Jon Loeliger <jdl@freescale.com>
17218 Date: Tue Aug 22 10:42:21 2006 -0500
17220 Cleanup compiler warnings.
17222 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
17223 Author: Matthew McClintock <msm@freescale.com>
17224 Date: Tue Aug 22 09:31:59 2006 -0500
17226 Fix disable_of booting
17228 Signed-off-by: Matthew McClintock <msm@freescale.com>
17230 commit 87a449c8ac396420cb24260f717ea9e6faa82047
17231 Author: Matthew McClintock <msm@freescale.com>
17232 Date: Tue Aug 22 09:23:55 2006 -0500
17234 Support for FDT in uImage format, error when using FDT from flash
17236 Signed-off-by: Matthew McClintock <msm@freescale.com>
17238 commit 75c299c38369d01addd5e054b8a16217b70f4a86
17239 Author: Haiying Wang <haiying.wang@freescale.com>
17240 Date: Tue Aug 15 15:12:55 2006 -0400
17242 Unlock cache before kernel starts up for MPC86xx
17244 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
17245 Author: Haiying Wang <haiying.wang@freescale.com>
17246 Date: Tue Aug 15 15:13:15 2006 -0400
17248 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
17250 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
17251 Author: Haiying Wang <haiying.wang@freescale.com>
17252 Date: Tue Aug 15 15:12:55 2006 -0400
17254 Unlock cache before kernel starts up for MPC86xx
17256 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
17257 Author: Haiying Wang <haiying.wang@freescale.com>
17258 Date: Tue Aug 15 15:13:15 2006 -0400
17260 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
17262 commit 86c8e17f25e972a7e272950a0735fad84e082b88
17263 Author: Matthew McClintock <msm@freescale.com>
17264 Date: Wed Aug 16 13:59:47 2006 -0500
17266 * Fix disable_of booting
17268 Signed-off-by: Matthew McClintock <msm@freescale.com>
17270 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
17271 Author: Matthew McClintock <msm@freescale.com>
17272 Date: Wed Aug 16 10:54:09 2006 -0500
17274 * Support for FDT in uImage format, error when using FDT from flash
17276 Signed-off-by: Matthew McClintock <msm@freescale.com>
17278 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
17279 Author: Stefan Roese <sr@denx.de>
17280 Date: Tue Aug 15 14:22:35 2006 +0200
17282 Add initial support for the ALPR board from Prodrive
17283 NAND needs some additional testing
17284 Patch by Heiko Schocher, 15 Aug 2006
17286 commit f0ff4692ff3372dec55074a8eb444943ab095abb
17287 Author: Stefan Roese <sr@denx.de>
17288 Date: Tue Aug 15 14:15:51 2006 +0200
17290 Add FPGA Altera Cyclone 2 support
17291 Patch by Heiko Schocher, 15 Aug 2006
17293 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
17294 Author: Jon Loeliger <jdl@freescale.com>
17295 Date: Mon Aug 14 15:33:38 2006 -0500
17297 Fix BAT0 to actually be cacheable, non-guarded as documented.
17299 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17301 commit 40bc83559db5745681909fd7382ae509567e116d
17302 Author: Jon Loeliger <jdl@freescale.com>
17303 Date: Wed Aug 9 15:32:16 2006 -0500
17305 Removed MPC8641HPCN DTS source file from build.
17306 It is no longer linked into U-Boot; its sources are
17307 now located in the kernel tree.
17309 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17311 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
17312 Author: Matthew McClintock <msm@freescale.com>
17313 Date: Wed Jun 28 10:47:03 2006 -0500
17315 * Switched default PCI speed for 8540 ADS back to 33MHz
17317 * Added comments and a printf to warn that PCI-X won't
17319 Patch by Andy Fleming 17-Mar-2006
17321 Signed-off-by: Andy Fleming <afleming@freescale.com>
17323 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
17324 Author: Matthew McClintock <msm@freescale.com>
17325 Date: Wed Jun 28 10:46:35 2006 -0500
17327 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
17329 Signed-off-by: Andy Fleming <afleming@freescale.com>
17331 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
17332 Author: Matthew McClintock <msm@freescale.com>
17333 Date: Wed Jun 28 10:46:13 2006 -0500
17335 * Added VIA configuration table
17337 * Added support for PCI2 on CDS
17338 Patch by Andy Fleming 17-Mar-2006
17340 Signed-off-by: Andy Fleming <afleming@freescale.com>
17342 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
17343 Author: Matthew McClintock <msm@freescale.com>
17344 Date: Wed Jun 28 10:45:41 2006 -0500
17346 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
17348 Signed-off-by: Andy Fleming <afleming@freescale.com>
17350 commit 97074ed9655309b64231bc2cee69fe85399f8055
17351 Author: Matthew McClintock <msm@freescale.com>
17352 Date: Wed Jun 28 10:45:17 2006 -0500
17354 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
17356 Signed-off-by: Andy Fleming <afleming@freescale.com>
17358 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
17359 Author: Matthew McClintock <msm@freescale.com>
17360 Date: Wed Jun 28 10:44:49 2006 -0500
17362 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
17364 Signed-off-by: Andy Fleming <afleming@freescale.com>
17366 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
17367 Author: Matthew McClintock <msm@freescale.com>
17368 Date: Wed Jun 28 10:44:23 2006 -0500
17370 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
17372 Signed-off-by: Andy Fleming <afleming@freescale.com>
17374 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
17375 Author: Matthew McClintock <msm@freescale.com>
17376 Date: Wed Jun 28 10:43:36 2006 -0500
17378 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
17380 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17382 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
17383 Author: Matthew McClintock <msm@freescale.com>
17384 Date: Wed Jun 28 10:43:00 2006 -0500
17386 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
17388 commit 5498d90312aad9f6bdbf047986027c35b03cd163
17389 Author: Matthew McClintock <msm@freescale.com>
17390 Date: Wed Jun 28 10:42:24 2006 -0500
17392 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
17394 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
17395 Author: Matthew McClintock <msm@freescale.com>
17396 Date: Wed Jun 28 10:41:37 2006 -0500
17398 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
17400 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
17401 Author: John Traill <john.traill@freescale.com>
17402 Date: Wed Aug 9 14:33:50 2006 +0100
17404 Add Rapidio support for the MPC8641HPCN
17406 Signed-off-by: John Traill <john.traill@freescale.com>
17408 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
17409 Author: John Traill <john.traill@freescale.com>
17410 Date: Tue Aug 8 11:32:43 2006 +0100
17412 Fix caslat calculation
17414 Signed-off-by: John Traill <john.traill@freescale.com>
17416 commit 709d3073e74153278e7904a70819bbef7df50e1a
17417 Author: Jon Loeliger <jdl@freescale.com>
17418 Date: Thu Aug 3 16:17:56 2006 -0500
17420 Convert to mac-address in ethernet nodes.
17422 commit 71748af833ca1017edf1415be376366ff2937d17
17423 Author: Haiying Wang <haiying.wang@freescale.com>
17424 Date: Fri Jul 28 12:41:35 2006 -0400
17426 Correct the irq value of DUART2
17428 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
17429 Author: Haiying Wang <haiying.wang@freescale.com>
17430 Date: Fri Jul 28 12:41:41 2006 -0400
17432 Change the space size of PEX IO in README
17434 commit 239db37c94f7a92941c4465feceb867c609241c5
17435 Author: Haiying Wang <haiying.wang@freescale.com>
17436 Date: Fri Jul 28 12:41:18 2006 -0400
17438 Move get_board_sys_clk to board directory
17440 commit 492900b985439fbce1a118afde1e35def870db03
17441 Author: John Traill <john.traill@freescale.com>
17442 Date: Fri Jul 28 09:03:54 2006 +0100
17444 Fix 8641HPCN pollution
17446 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
17447 Author: John Traill <john.traill@freescale.com>
17448 Date: Fri Jul 28 08:16:06 2006 +0100
17450 Fix 8641HPCN timebase
17452 commit c86360b830f1eecd7a72208575dde4f57879faea
17453 Author: Zhang Wei <wei.zhang@freescale.com>
17454 Date: Fri Jul 28 00:01:34 2006 +0800
17456 Fixed OF device tree of mpc86xxhpcn board.
17458 The changes works in with kernel irq mapping rework.
17460 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17462 commit bea3f28d285942bf3f7ab339ce85178ded544225
17463 Author: Haiying Wang <haiying.wang@freescale.com>
17464 Date: Wed Jul 12 10:48:05 2006 -0400
17466 Add support for reading and writing mac addresses to or from ID EEPROM.
17468 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
17469 With attached patch, we can use command "mac/mac read/mac save/"
17470 to read and write EEPROM under u-boot prompt.
17472 U-boot will calculate the checksum of EEPROM while bootup,
17473 if it is right, then u-boot will check whether the mac address
17474 of eTSEC0/1/2/3 is availalbe (non-zero).
17476 If there is mac address availabe in EEPROM, u-boot will use it,
17477 otherewise, u-boot will use the mac address defined in
17478 MPC8641HPCN.h. This matches the requirement to set unique mac address
17479 for each TSEC port.
17481 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17482 Signed-off-by: York Sun <yorksun@freescale.com>
17484 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
17485 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
17486 Date: Thu Jul 13 10:35:10 2006 -0500
17488 Fixed initrd issue by define big RAM
17490 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
17492 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
17493 Author: Jason Jin <Jason.jin@freescale.com>
17494 Date: Fri Jul 7 10:01:45 2006 -0500
17496 We made a u-boot patch to fix the hang up issue
17497 when booting filesystem from ramdisk.
17499 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
17501 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
17502 Author: Matthew McClintock <msm@freescale.com>
17503 Date: Wed Jun 28 10:47:03 2006 -0500
17505 * Switched default PCI speed for 8540 ADS back to 33MHz
17506 * Added comments and a printf to warn that PCI-X won't
17508 Patch by Andy Fleming 17-Mar-2006
17510 Signed-off-by: Andy Fleming <afleming@freescale.com>
17512 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
17513 Author: Matthew McClintock <msm@freescale.com>
17514 Date: Wed Jun 28 10:46:35 2006 -0500
17516 * Fixed a bug where 8555 PCI code used the old variable and
17518 Patch by Andy Fleming 17-Mar-2006
17520 Signed-off-by: Andy Fleming <afleming@freescale.com>
17522 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
17523 Author: Matthew McClintock <msm@freescale.com>
17524 Date: Wed Jun 28 10:46:13 2006 -0500
17526 * Added VIA configuration table
17527 * Added support for PCI2 on CDS
17528 Patch by Andy Fleming 17-Mar-2006
17530 Signed-off-by: Andy Fleming <afleming@freescale.com>
17532 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
17533 Author: Matthew McClintock <msm@freescale.com>
17534 Date: Wed Jun 28 10:45:41 2006 -0500
17536 * Fixed PCI memory definitions
17537 Patch by Andy Fleming 17-Mar-2006
17539 Signed-off-by: Andy Fleming <afleming@freescale.com>
17541 commit 087454609e47295443af793a282cddcd91a5f49c
17542 Author: Matthew McClintock <msm@freescale.com>
17543 Date: Wed Jun 28 10:45:17 2006 -0500
17545 * Added support for initializing second PCI bus on 85xx
17546 Patch by Andy Fleming 17-Mar-2006
17548 Signed-off-by: Andy Fleming <afleming@freescale.com>
17550 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
17551 Author: Matthew McClintock <msm@freescale.com>
17552 Date: Wed Jun 28 10:44:49 2006 -0500
17554 * Added PCI-X #defines for PCI-X initialization
17555 Patch by Andy Fleming on 17-Mar-2006
17557 Signed-off-by: Andy Fleming <afleming@freescale.com>
17559 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
17560 Author: Matthew McClintock <msm@freescale.com>
17561 Date: Wed Jun 28 10:44:23 2006 -0500
17563 * Made sure the code which disables prefetch for PCI devices
17564 sets the size of the prefetch region to 0
17565 Patch by Andy Fleming on 17-Mar-2006
17567 Signed-off-by: Andy Fleming <afleming@freescale.com>
17569 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
17570 Author: Matthew McClintock <msm@freescale.com>
17571 Date: Wed Jun 28 10:43:36 2006 -0500
17573 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
17574 Patch by Jon Loeliger 17-Jan-2006
17576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17578 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
17579 Author: Matthew McClintock <msm@freescale.com>
17580 Date: Wed Jun 28 10:43:00 2006 -0500
17582 * Removed the oftree.dts for stxxtx in light of the changes
17583 to the flat device tree handling code
17584 Patch by Matthew McClintock 26-June-2006
17586 commit 1b380ec225665e73959677f3893dc658c5925e05
17587 Author: Matthew McClintock <msm@freescale.com>
17588 Date: Wed Jun 28 10:42:24 2006 -0500
17590 * Patch to modify ft_build.c to update flat device trees in place
17591 Patch by Matthew McClintock 26-June-2006
17593 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
17594 Author: Matthew McClintock <msm@freescale.com>
17595 Date: Wed Jun 28 10:41:37 2006 -0500
17597 * Modify bootm command to support booting with flat device trees
17598 Patch by Matthew McClintock 26-June-2006
17600 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
17601 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
17602 Date: Wed Jun 28 08:43:56 2006 -0500
17604 Change Id to symbolic name for RTL8139
17606 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17608 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
17609 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17610 Date: Tue Jun 27 18:12:10 2006 +0800
17612 Fix RTL8139 in big endian
17614 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
17615 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
17617 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
17618 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17619 Date: Tue Jun 27 18:12:23 2006 +0800
17621 Fix Tsec bug when no link
17623 When tftp a non-exist file from the tftp server, u-boot will check
17624 the link of all eth port. The original file will return wrong link
17625 state on the no link ports.
17627 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
17629 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
17630 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17631 Date: Tue Jun 27 18:12:02 2006 +0800
17633 Fix bug for io_bar size during pci scan
17635 During the pci scan process, Some devices return bar_reponse with the
17636 highest bytes 0, such as the pci bridge in uli1575 return bar_response
17637 with 0xffffff, So the bar_size should be manually set under 64K.
17639 Signed-off-by: Jason Jin <jason.jin@freescale.com>
17641 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
17642 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17643 Date: Tue Jun 27 18:11:54 2006 +0800
17645 Enable PCIE1 for MPC8641HPCN board
17647 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17649 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
17650 Author: Wolfgang Denk <wd@pollux.denx.de>
17651 Date: Mon Jun 26 11:06:00 2006 +0200
17655 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
17656 Author: Jon Loeliger <jdl@freescale.com>
17657 Date: Thu Jun 22 08:51:46 2006 -0500
17659 Fix bug in 8641hpcn reset command with no args.
17661 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17662 Acked-by: Jon Loeliger <jdl@freescale.com>
17664 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
17665 Author: Zhang Wei <wei.zhang@freescale.com>
17666 Date: Tue Jun 20 17:47:15 2006 +0800
17668 Reworked IRQ mapping in OF-tree.
17670 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
17671 Author: Jon Loeliger <jdl@freescale.com>
17672 Date: Thu Jun 15 21:33:37 2006 -0500
17674 Do not enable address translation on secondary CPUs.
17675 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
17677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17679 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
17680 Author: Wolfgang Denk <wd@pollux.denx.de>
17681 Date: Wed Jun 14 18:14:56 2006 +0200
17685 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
17686 Author: Wolfgang Denk <wd@pollux.denx.de>
17687 Date: Wed Jun 14 17:45:53 2006 +0200
17689 Various USB related patches
17690 - Add support for mpc8xx USB device.
17691 - Add support for Common Device Class - Abstract Control Model USB console.
17692 - Add support for flow control in USB slave devices.
17693 - Add support for switching between gserial and cdc_acm using environment.
17694 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
17695 - Update usbcore slightly to ease host enumeration.
17696 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
17697 - Add AdderUSB_config as a defconfig to enable usage of the USB console
17698 by default with the Adder87x U-Boot port.
17699 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
17701 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
17702 Author: Jon Loeliger <jdl@jdl.com>
17703 Date: Wed Jun 7 10:53:55 2006 -0500
17705 Fix a get_board_sys_clk() use-before-def warning.
17707 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17709 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
17710 Author: Jon Loeliger <jdl@jdl.com>
17711 Date: Wed Jun 7 10:52:49 2006 -0500
17713 Allow DTC path to be passed in.
17715 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17717 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
17718 Author: Haiying Wang <haiying.wang@freescale.com>
17719 Date: Tue Jun 6 16:54:29 2006 -0400
17721 Modify the IRQ of DUART2
17723 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
17724 Author: Jon Loeliger <jdl@jdl.com>
17725 Date: Wed May 31 13:55:35 2006 -0500
17729 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17731 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
17732 Author: Jon Loeliger <jdl@jdl.com>
17733 Date: Wed May 31 12:44:44 2006 -0500
17735 White space cleanup.
17736 Some 80-column cleanups.
17737 Convert printf() to puts() where possible.
17738 Use #include "spd_sdram.h" as needed.
17739 Enhanced reset command usage message a bit.
17741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17743 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
17744 Author: Jon Loeliger <jdl@jdl.com>
17745 Date: Wed May 31 11:39:34 2006 -0500
17747 Removed unneeded local_bus_init() from 8641HPCN board.
17749 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17751 commit 4d3d729c16c392d2982d3266b659d333c927697d
17752 Author: Jon Loeliger <jdl@jdl.com>
17753 Date: Wed May 31 11:24:28 2006 -0500
17755 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
17757 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17759 commit b2a941de060350ad15878d8219825f4950e9bb8e
17760 Author: Jon Loeliger <jdl@jdl.com>
17761 Date: Wed May 31 10:07:28 2006 -0500
17763 Remove dead debug code.
17765 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17767 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
17768 Author: Jon Loeliger <jdl@freescale.com>
17769 Date: Tue May 30 17:47:00 2006 -0500
17771 Move mpc86xx PIXIS code to board directory
17773 First cut at moving the PIXIS platform code out of
17774 the 86xx cpu directory and into board/mpc8641hpcn
17777 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17779 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
17780 Author: Markus Klotzbuecher <mk@denx.de>
17781 Date: Tue May 30 16:56:14 2006 +0200
17783 Support generic OHCI support for the s3c24x0 cpu.
17785 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
17786 Author: Haiying Wang <Haiying.Wang@freescale.com>
17787 Date: Tue May 30 09:10:32 2006 -0500
17789 Improve "reset" command's interaction with watchdog.
17791 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
17792 "reset altbank wd" will reset another bank WITH watch dog enabled
17793 "diswd" will disable watch dog after u-boot boots up successfully
17795 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17797 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
17798 Author: Haiying Wang <Haiying.Wang@freescale.com>
17799 Date: Tue May 30 08:51:19 2006 -0500
17801 Fix two SDRAM setup bugs.
17804 Enable 1T/2T based on number of DIMMs present.
17806 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17808 commit d11fec5015334deb2010e36ce00bb118cc5429a5
17809 Author: Haiying Wang <Haiying.Wang@freescale.com>
17810 Date: Fri May 26 10:24:48 2006 -0500
17812 Add first draft of the MPC8641HPCN doc/README.
17814 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17816 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
17817 Author: Haiying Wang <Haiying.Wang@freescale.com>
17818 Date: Fri May 26 10:13:04 2006 -0500
17820 Added pci@8000 block.
17821 Updated ethernet interrupt mappings (moved up 48).
17822 Cleaned up a few comments.
17824 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17826 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
17827 Author: Haiying Wang <Haiying.Wang@freescale.com>
17828 Date: Fri May 26 10:01:16 2006 -0500
17830 Allow args on reset command.
17832 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17834 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
17835 Author: Markus Klotzbuecher <mk@denx.de>
17836 Date: Tue May 23 13:38:35 2006 +0200
17838 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
17839 fixes to the latter.
17841 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
17842 Author: Markus Klotzbuecher <mk@denx.de>
17843 Date: Tue May 23 10:33:11 2006 +0200
17845 More cleanup for the delta board and the generic usb_ohci driver. Added
17846 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
17847 initialization and cleanup hooks respectively.
17849 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
17850 Author: Markus Klotzbuecher <mk@denx.de>
17851 Date: Mon May 22 16:33:54 2006 +0200
17853 This patch adds USB storage support for the delta board. This is the first
17854 board to make use of a generic OHCI driver, that calls hooks for board
17855 dependant initialization.
17857 commit 14e37081ff3cac7ebe6e93836523429853b6b292
17858 Author: Jon Loeliger <jdl@jdl.com>
17859 Date: Fri May 19 13:28:39 2006 -0500
17861 Change arbitration to round-robin for SMP linux.
17863 commit 9a655876e5995be80f49054e2509500e871e4d3a
17864 Author: Jon Loeliger <jdl@jdl.com>
17865 Date: Fri May 19 13:26:34 2006 -0500
17867 Enable dual DDR controllers and interleaving.
17869 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
17870 Author: Jon Loeliger <jdl@jdl.com>
17871 Date: Fri May 19 13:22:44 2006 -0500
17873 Update 86xx address map and LAWBARs.
17875 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
17876 Author: Jon Loeliger <jdl@jdl.com>
17877 Date: Fri May 19 13:14:15 2006 -0500
17879 Remove L2 Cache invalidate polling.
17881 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
17882 Author: Jon Loeliger <jdl@jdl.com>
17883 Date: Fri May 19 12:33:09 2006 -0500
17885 Enable 2nd CPU and I2C.
17887 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
17888 Author: Jon Loeliger <jdl@freescale.com>
17889 Date: Mon May 15 07:26:56 2006 -0500
17891 Update interrupt mapping.
17893 commit 6cfea33477b04b63ed47386ed1629529484c33ba
17894 Author: Haiying Wang <Haiying.Wang@freescale.com>
17895 Date: Wed May 10 09:38:06 2006 -0500
17897 Remove unneeded INIT_RAM_LOCK cache twiddling.
17898 Correctly tracks r29 as global data pointer now.
17900 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17902 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
17903 Author: Jon Loeliger <jdl@freescale.com>
17904 Date: Wed May 10 09:33:07 2006 -0500
17906 Remove unnecessary flash.c file.
17908 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
17909 Author: Jon Loeliger <jdl@freescale.com>
17910 Date: Tue May 9 08:23:49 2006 -0500
17912 Get MPC8641HPCN flash images working.
17914 Enable the CFI driver.
17915 Remove bogus LAWBAR7 cruft.
17916 Use correct TEXT_BASE, Fixup load script.
17917 Enable SPD EEPROM during DDR setup.
17918 Use generic RFC 1918 IP addresses by default.
17920 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
17921 Author: Jon Loeliger <jdl@freescale.com>
17922 Date: Thu Apr 27 10:15:16 2006 -0500
17924 Cleanup whitespaces and style issues.
17925 Removed //-style comments.
17926 Use 80-column lines.
17927 Remove trailing whitespace.
17928 Remove dead code and debug cruft.
17930 commit a2320a6bf8113a09544c42d160d10ac69d049a03
17931 Author: Jon Loeliger <jdl@freescale.com>
17932 Date: Thu Apr 27 08:22:39 2006 -0500
17934 Revert bad PCI prefetch limit change.
17936 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
17937 Author: Jon Loeliger <jdl@freescale.com>
17938 Date: Wed Apr 26 17:58:56 2006 -0500
17940 Initial support for MPC8641 HPCN board.