1 ======================================================================
2 Changes since U-Boot 1.1.1:
3 ======================================================================
5 * Fix problems with CMC_PU2 flash driver.
8 - avoid trigraph warning in fs/ext2/ext2fs.c
9 - rename UC100 -> uc100
11 * Add support for UC100 board
13 * Patch by Stefan Roese, 16 Dez 2004:
14 - ext2fs support added
15 - Tundra universe support added
16 - Coldfire MCF5249 support added (no preloader needed!)
17 - MCF5249 board TASREG added
18 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
20 - some esd boards updated
21 - memory commands "mdc" and "mwc" added for cyclic read/write
22 (CONFIG_MX_CYCLIC, see README for further description)
24 * Add support for INKA4X0 board
26 * Patch by Steven Scholz, 12 Dec 2004:
27 Fix typo in AT91 memory setup.
29 * Patch by Martin Krause, 27 Oct 2004:
30 - add support for "STK52xx" board (including PS/2 multiplexer)
31 - add hardware detection for TQM5200
33 * Clean up CMC PU2 flash driver
35 * Update MAINTAINERS file
37 * Fix bug in MPC823 LCD driver
39 * Fix udelay() on AT91RM9200 for delays < 1 ms.
41 * Enable long help on CMC PU2 board;
43 increase CPU speed from 179 to 207 MHz.
45 * Fix smc91111 ethernet driver for Xaeniax board (need to handle
46 unaligned tail part specially).
48 * Update for AT91RM9200DK and CMC_PU2 boards:
49 - Enable booting directly from flash
50 - fix CMC_PU2 flash driver
52 * Fix mkimage usage message
54 * Map SRAM on NC650 board
56 * Work around for Ethernet problems on Xaeniax board
58 * Patch by TsiChung Liew, 23 Sep 2004:
59 - add support for MPC8220 CPU
60 - Add support for Alaska and Yukon boards
62 * Fix configuration for ERIC board (needs more room)
64 * Adjust MIPS compiler options at run-time depending on tools version
65 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
66 "-mcpu=4kc" for old tools)
68 * Add passing of the command line and memory size information to the
69 kernel on xaeniax board.
71 * Enable NAND flash support for NC650 board.
73 * Patch by Thomas Lange 07 Oct 2004:
74 Updated README for DBAu1x00 boards to match current status
76 * Patch by Philippe Robin, 28 Sept 2004:
77 Fix Flash support for Versatile.
79 * Patch by Roger Blofeld, 16 Sep 2004:
80 Fix timeout for DHCP command retry
82 * Patch by Pantelis Antoniou, 14 Sep 2004:
83 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
85 * Patch by Pantelis Antoniou, 14 Sep 2004:
86 Kick watchdog when bz-decompressing
88 * Fix CFG_HZ problems on AT91RM9200 systems
89 [Remember: CFG_HZ should be 1000 on ALL systems!]
91 * Patch by Gridish Shlomi, 30 Aug 2004:
92 - Add support to revA version of PQ27 and PQ27E.
93 - Reverted MPC8260ADS baudrate back to original 115200
95 * Patch by Hojin, 17 Sep 2004:
96 Fix typo in cfi_flash.c
98 * Patch by Mark Jonas, 09 September 2004:
99 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
102 * Patch by Mark Jonas, 31 August 2004:
103 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
104 improves FTP performance for MPC5200 systems. Enabled for IceCube
107 * Patch by Michael Bendzick, 30 Aug 2004:
108 - Improve platform.S code for omap1510inn that detects whether code
109 is running from SDRAM or not. Patch allows SDRAM to be configured
110 if code is running out of SRAM at 0x20000000.
112 * Patch by Frederick Klatt, 30 Aug 2004:
113 Add support for the Wind River SBC8540/SBC8560 boards
115 * Configure SX1 board to use drivers/cfi_flash.c
117 * Patches by Michael Bendzick, 30 Aug 2004:
118 - Configure omap1510inn board to use drivers/cfi_flash.c
119 - Make drivers/cfi_flash.c protect environment and redundant
122 * Patch by Steven Scholz, 23 Jun 2004:
123 - Add script (tools/img2brec.sh) to programm U-Boot into
124 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
126 * Patches by Scott McNutt, 24 Aug 2004:
127 - Add support for Altera Nios-II processors.
128 - Add support for Psyent PCI-5441 board.
129 - Add support for Psyent PK1C20 board.
131 * Patches by Jon Loeliger, 24 Aug 2004:
132 - Add support for the MPC8541 and MPC8555 CDS boards
133 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
134 - Convert MPC85xxADS to use common CFI flash driver
135 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
136 from board_early_init_f()
137 - Provide SW workaround for PCI initialization on 85xx CDS
139 * Patches by George G. Davis, 24 Aug 2004:
140 - Enable ramdisk/initrd tagged param support for omap1610h2_config
141 - Remove static network setup defaults from mx1ads_config
142 - update ARM boards to use constants from mach-types.h
144 * Patch by Gary Jennejohn, 04 Oct 2004:
145 - fix I2C on at91rm9200
146 - add support for Ricoh RS5C372A RTC
148 * Patch by Gary Jennejohn, 01 Oct 2004:
149 - add support for CMC PU2 board
150 - add support for I2C on at91rm9200
152 * Patch by Gary Jennejohn, 28 Sep 2004:
153 fix baudrate handling on at91rm9200
155 * Patch by Yuli Barcohen, 22 Aug 2004:
156 - remove ZPC.1900 board-specific flash driver;
157 switch the port to generic CFI driver;
160 * Patch by Hinko Kocevar, 21 Aug 2004:
161 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
163 * Clean up tools/bmp_logo.c to not add trailing white space
165 * Patch by Hinko Kocevar, 21 Aug 2004:
166 - Group common framebuffer functions in common/lcd.c
167 - Group common framebuffer macros and #defines in include/lcd.h
168 - Provide calc_fbsize() for video ATAG
170 * Patch by Sam Song, 21 August 2004:
171 - Fix a typo in README
172 - Align "(RO)" output for "flinfo" after "protect on"
173 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
174 ratio 1:1 when core frequency less than 50MHz
176 * Patches by Hinko Kocevar, 21 Aug 2004:
177 - fix some "use of label at end of compound statement" warnings
178 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
180 * Patch by Steven Scholz, 16 Aug 2004:
181 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
182 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
183 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
184 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
185 into cpu/arm920t/$(SOC)/
187 * Patches by Sean Chang, 09 Aug 2004:
188 - Added support for both 8 and 16 bit mode access to System ACE CF
190 - Fixed missing System ACE CF device during get FAT partition info
191 in fat_register_device function.
192 - Enabled System ACE CF support on ML300.
194 * Patch by Sean Chang, 09 Aug 2004:
195 Synch defines for saveenv and do_saveenv functions so they get
196 compiled under the same statement.
198 * Patch by Sean Chang, 09 Aug 2004:
199 - Added I2C support for ML300.
200 - Added support for ML300 to read out its environment information
201 stored on the EEPROM.
202 - Added support to use board specific parameters as part of
203 U-Boot's environment information.
204 - Updated MLD files to support configuration for new features
207 * Patches by Travis Sawyer, 05 Aug 2004:
208 - Remove incorrect bridge settings for eth group 6
209 - Add call to setup bridge in ppc_440x_eth_initialize
210 - Fix ppc_440x_eth_init to reset the phy only if its the
211 first time through, otherwise, just check the phy for the
212 autonegotiated speed/duplex. This allows the use of netconsole
213 - only print the speed/duplex the first time the phy is reset.
215 * Patch by Shlomo Kut, 29 Mar 2004:
216 Add support for MKS Instruments "Quantum" board
218 * Fix build problem with Cogent boards;
219 avoid using <asm/byteorder.h> when using the host compiler
221 * Patch by Ganapathi C, 04 Aug 2004:
222 Fix NFS timeout issue
224 * Patch by Yuli Barcohen, 19 Jul 2004:
225 - Fix host tools building in Cygwin environment
226 - Fix header files search order for host tools
228 * Patch by Tom Armistead, 19 Jul 2004:
229 Fix kgdb.S support for 74xx_75x cpu
231 * Patch by Jon Loeliger, 15 Jul 2004:
232 Fix MPC85xx I2C driver
234 * Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
236 * Patch by Stephen Williams, 15 July 2004
237 Set the PCI class code for JSE board as part of PCI interface setup
239 * Patch by Michael Bendzick, 15 Jul 2004:
240 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
241 CFG_FLASH_USE_BUFFER_WRITE is set
243 * Patch by Yuli Barcohen, 13 Jul 2004:
244 Allow clock setting on MPC866/MPC885 series chips according to
245 environment variable `cpuclk'
247 * Patch by Yuli Barcohen, 20 Apr 2004:
248 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
250 * Patch by Vincent Dubey, 24 Sep 2004:
251 Add support for xaeniax board
253 * Add comment about non-GPL character of standalone applications to
256 * Fix FEC ethernet problem on NSCU board.
258 * Patch by Gary Jennejohn, 09 Sep 2004:
259 allow to use USART1 as console port on at91rm9200dk boards
261 * Patch by Stefan Roese, 16 Sep 2004:
264 * Fix SysClk handling for PPChameleon and CATcenter boards
266 * Patch by Detlev Zundel, 08 Sep 2004:
267 Update etags build target
269 * Improve NetConsole support: add support for broadcast destination
270 address and buffered input.
272 * Cleanup compiler warnings for GCC 3.3.x and later
274 * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
276 * Add support for IDS "NC650" board
278 * Add automatic update support for LWMON board
280 * Clear Block Lock-Bits when erasing flash on LWMON board.
282 * Fix return code of "fatload" command
284 * Enable MSDOS/VFAT filesystem support for LWMON board
286 * Patch by Martin Krause, 03 Aug 2004:
287 change timing for SM501 graphics controller on TQM5200 module
289 * Patch by Mark Jonas, 13 July 2004:
290 - Total5200 LCD now run in little endian mode. Endianess conversion
292 - Removed last reference to "console" environment variable.
294 * Patches by Lars Munch, 12 Jul 2004:
295 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
297 - split out the LXT971A PHY from ns_9750_eth.h
298 - split the dm9161 phy part out of at91rm9200_ether.c
300 * Patch by Andreas Engel, 12 Jul 2004:
301 Replaced hardcoded PL011 clock frequency with config variable.
302 Fixed wrong CONFIG_CMD_DFL doc.
304 * Patch by Thomas Viehweger, 09 Jun 2004:
305 make it possible to remove chpart when there is only one partition
307 * Add support for console over UDP (compatible to Ingo Molnar's
308 netconsole patch under Linux)
310 * Patch by Jon Loeliger, 16 Jul 2004:
311 - support larger DDR memories up to 2G on the PC8540/8560ADS and
313 - Made MPC8540/8560ADS be 33Mhz PCI by default.
314 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
315 and CONFIG_L2_INIT_RAM options.
316 - Refactor Local Bus initialization out of SDRAM setup.
317 - Re-implement new version of LBC11/DDR11 errata workarounds.
318 - Moved board specific PCI init parts out of CPU directory.
319 - Added TLB entry for PCI-1 IO Memory
320 - Updated README.mpc85xxads
322 * Patch by Sascha Hauer, 28 Jun:
323 - add generic support for Motorola i.MX architecture
324 - add support for mx1ads, mx1fs2 and scb9328 boards
326 * Patches by Marc Leeman, 23 Jul 2004:
327 - Add define for the PCI/Memory Buffer Configuration Register
328 - corrected comments in cpu/mpc824x/cpu_init.c
330 * Add support for multiple serial interfaces
331 (for example to allow modem dial-in / dial-out)
333 * Patch by Stefan Roese, 15 Jul 2004:
334 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
336 * Fix NSCU config; add ethernet wakeup code.
338 * Add link for preloader for Motorola Coldfire to README.m68k
340 * Patch by Michael Bendzick, 12 Jul 2004:
341 fix output formatting in drivers/cfi_flash.c
343 * Patch by Mark Jonas, 02 Jul 2004:
344 Fix lowboot (again) on MPC5xxx
346 * Patch by Curt Brune, 07 Jul 2004:
347 relocate exception vectors on arm720t if needed
349 * Patch by George G. Davis, 06 Jul 2004:
350 - update mach-types.h to latest arm.linux.org.uk master list
351 - Set correct OMAP1610 bi_arch_number for build target
353 * Patch by Curt Brune, 06 Jul 2004:
354 evb4510: add support for timer interrupt; cleanup
356 * Patch by Dan Poirot, 06 Jul 2004:
357 Fix sbc8260 environment variables
359 * Cleanup redundand "console" environment variable
361 * Patch by Mark Jonas, 05 Jul 2004:
362 add support for the Total5100's and Total5200's LCD screen
364 * Patches by Dan Eisenhut, 01 Jul 2004:
366 - Move doc2000.h include to prevent compiler warning on some boards
368 * Patch by Mark Jonas, 01 Jul 2004:
369 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
370 MGT5100 and MPC5200 based Freescale platforms.
372 * Patch by Philippe Robin, 01 Jul 2004:
373 Add initialization for Integrator and versatile board files.
375 * Patch by Hinko Kocevar, 01 Jun 2004:
376 Fix VFD FB allocation, add LCD FB allocation on ARM
378 * Patch by Martin Krause, 30 Jun 2004:
379 Add support for TQM5200 board
381 * Patch by Martin Krause, 29 Jun 2004:
382 Add loopw command: infinite write loop on address range
384 * Patches by Yasushi Shoji, 29 Jun 2004:
385 - add empty include/asm-microblaze/processor.h
386 - add to CREDITS and MAINTAINERS
387 - add gd initialization
388 - add MicroBlaze and SUZAKU board to MAKEALL script
389 - add reset support for SUZAKU
390 - add flush_cache() for MicroBlaze
391 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
392 size flash memory on SUZAKU
394 * Patch by Prakash Kumar, 27 Jun 2004:
395 Add support for the PXA250 based Intrinsyc Cerf board.
397 * Patch by Yasushi Shoji, 27 Jun 2004:
398 fix comment in include/common.h
400 * Rename SBC8560 into sbc8560 for consistency
402 * Patch by Daniel Poirot, 24 Jun 2004:
403 Add support for Wind River's sbc8240 board
405 * Patches by Yasushi Shoji, 26 Jun 2004:
406 - drivers/serial_xuartlite.c: fix "return 0" in void function
407 - add microblaze support to mkimage tool
409 * Patch by Fred Klatt, 25 Jun 2004:
410 Add support for WindRiver's sbc8560 board
412 * Patch by Nicolas Lacressonniere, 24 Jun 2004
413 Small Bugs fixes for "at91rm9200dk" board:
414 - Timing modifications for SPI DataFlash access
415 - Fix NAND flash detection bug
417 * Patch by Nicolas Lacressonniere, 24 Jun 2004:
418 Add Support for Flash AT49BV6416 for AT91RM9200DK board
420 * Patch by Jon Loeliger, 17 June 2004:
421 Completion of the 8540ADS/8560ADS updates:
422 Fix some PCI and Rapid I/O memory maps,
423 Initialize both TSEC 1 and 2,
425 Update MAINTAINER for 85xx boards and README.mpc85xxads
427 * Patch by Yuli Barcohen, 16 Jun 2004:
428 Remove obsolete AdderII port which was superseded by unified
429 AdderII/Adder87x port
431 * Patch by Ladislav Michl, 16 Jun 2004:
432 Fix gcc-3.3.3 warnings for smc91111.c
434 * Patch by Stefan Roese, 02 Jul 2004:
435 - Fix bug in 405 ethernet driver; allocated data not cleared!
436 - Fix problem in 405 i2c driver; don't try to print without console!
438 * Patch by Paul Ruhland, 11 Jun 2004:
439 Remove debug code from 'board/lpd7a40x/flash.c'
441 * Patch by Andrea Marson, 11 Jun 2004:
442 Update for PPChameleon board:
443 - support for SysClk @ 25MHz
444 - support for Silicon Motion SM712 VGA controller
447 * Patches by Richard Woodruff, 10 Jun 2004:
448 - fix problems with examples/stubs.c for GCC >= 3.4
449 - fix problems with gd initialization
451 * Patch by Curt Brune, 17 May 2004:
452 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
453 - Add support for ESPD-Inc. EVB4510 Board
455 * Patch by Marc Leeman, 11 May 2004:
456 Fix for MPC8245 - reading PPC Memory from another device with the
457 PPC as PCI target device corrupts data due to interenal hardware
460 * Fix "cls" command when used with splash screen
462 * Increase NFS download timeout (now 1 min - 10 sec is to short for a
463 slow download of a big image)
465 * Add "cls" function to MPC823 LCD driver so we can reinitialize the
466 display even after showing a bitmap
468 * Patch by Josef Wagner, 04 Jun 2004:
469 - DDR Ram support for PM520 (MPC5200)
470 - support for different flash types (PM520)
471 - USB / IDE / CF-Card / DiskOnChip support for PM520
472 - 8 bit boot rom support for PM520/CE520
473 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
474 - I2C and RTC support for CPC45
475 - support of new flash type (28F160C3T) for CPC45
477 * Fix flash parameters passed to Linux for PPChameleon board
479 * Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
481 * Patch by Paul Ruhland, 10 Jun 2004:
482 fix support for Logic SDK-LH7A404 board and clean up the
483 LH7A404 register macros.
485 * Patch by Matthew McClintock, 10 Jun 2004:
486 Modify code to select correct serial clock on Sandpoint8245
488 * Patch by Robert Schwebel, 10 Jun 2004:
489 Add support for Intel K3 strata flash.
491 * Patch by Thomas Brand, 10 Jun 2004:
492 Fix "loads" command on DK1S10 board
494 * Patch by Yuli Barcohen, 09 Jun 2004:
495 Add support for 8MB flash SIMM and JFFS2 file system on
496 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
498 * Patch by Yuli Barcohen, 09 Jun 2004:
499 Add support for Analogue&Micro Adder87x and the older AdderII board.
501 * Patch by Ming-Len Wu, 09 Jun 2004:
502 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
504 * Patch by Sam Song, 09 Jun 2004:
505 - Add support for RPXlite_DW board
506 - Update FLASH driver for 4*AM29DL323DB90VI
507 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
509 * Patch by Mark Jonas, 08 June 2004:
510 - Make MPC5200 boards evaluate the SVR to print processor name and
511 version in checkcpu() (cpu/mpc5xxx/cpu.c).
513 * Patch by Kai-Uwe Bloem, 06 May 2004:
514 Fix endianess problem in cramfs code
516 * Patch by Tom Armistead, 04 Jun 2004:
517 Add support for MAX6900 RTC
519 * Patches by Ladislav Michl, 03 Jun 2004:
520 - fix cfi_flash.c on LE systems
521 - let 'make mrproper' delete u-boot.img as well
522 - turn printf into debug in cfi_flash.c
524 * Patch by Kurt Stremerch, 28 May 2004:
525 Add support for Exys XSEngine board
527 * Patch by Martin Krause, 27 May 2004:
528 Fix a MPC5xxx I2C timing issue in i2c_probe().
530 * Patch by Leif Lindholm, 27 May 2004:
531 Fix board_init_f() for dbau1x00 board.
533 * Patch by Imre Deak, 26 May 2004:
534 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
535 Set flash base accordingly, and decide whether to do or skip board
536 specific setup steps.
538 * Patch by Josef Baumgartner, 26 May 2004:
539 Add missing define in include/asm-m68k/global_data.h
541 * Patch by Josef Baumgartner, 25 May 2004:
542 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
544 * Patch by Paul Ruhland, 24 May 2004:
545 fix SDRAM initialization for LPD7A400 board.
547 * Patch by Jian Zhang, 20 May 2004:
548 add support for environment in NAND flash
550 * Patch by Yuli Barcohen, 20 May 2004:
551 Add support for Interphase iSPAN boards.
553 * Patches by Paul Ruhland, 17 May 2004:
554 - Add I/O functions to the smc91111 ethernet driver to support the
555 Logic LPD7A40x boards.
556 - Add support for the Logic Zoom LH7A40x based SDK board(s),
557 specifically the LPD7A400.
559 * Patches by Robert Schwebel, 15 May 2004:
560 - call MAC address reading code also for SMSC91C111;
561 - make SMSC91C111 timeout configurable, remove duplicate code
562 - fix get_timer() for PXA
563 - update doc/README.JFFS2
564 - use "bootfile" env variable also for jffs2
566 * Patch by Tolunay Orkun, 14 May 2004:
567 Add support for Cogent CSB472 board (8MB Flash Rev)
569 * Patch by Thomas Viehweger, 14 May 2004:
570 - flash.h: more flash types added
571 - immap_8260.h: some bits added (useful for RMII)
572 - cmd_coninfo.c: typo corrected, printf -> puts
573 - reduced size by replacing spaces with tab
575 * Patch by Robert Schwebel, 13 May 2004:
576 Add 'imgextract' command: extract one part of a multi file image.
578 * Patches by Jon Loeliger, 11 May 2004:
579 Dynamically handle REV1 and REV2 MPC85xx parts.
580 (Jon Loeliger, 10-May-2004).
581 New consistent memory map and Local Access Window across MPC85xx line.
582 New CCSRBAR at 0xE000_0000 now.
583 Add RAPID I/O memory map.
584 New memory map in README.MPC85xxads
585 (Kumar Gala, 10-May-2004)
586 Better board and CPU identification on MPC85xx boards at boot.
587 (Jon Loeliger, 10-May-2004)
588 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
589 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
590 (Jim Robertson, 10-May-2004)
591 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
592 Supports multiple PHYs.
593 (Andy Fleming, 10-May-2004)
594 Some README.MPC85xxads updates.
595 (Kumar Gala, 10-May-2004)
596 Copyright updates for "Freescale"
597 (Andy Fleming, 10-May-2004)
599 * Patch by Stephen Williams, 11 May 2004:
600 Add flash support for ST M29W040B
601 Reduce JSE specific flash.c to remove dead code.
603 * Patch by Markus Pietrek, 04 May 2004:
604 Fix clear_bss code for ARM systems (all except s3c44b0 which
605 doesn't clear BSS at all?)
607 * Fix "ping" problem on INC-IP board. Strange problem:
608 Sometimes the store word instruction hangs while writing to one of
609 the Switch registers, but only if the next instruction is 16-byte
610 aligned. Moving the instruction into a separate function somehow
611 makes the problem go away.
613 * Patch by Rishi Bhattacharya, 08 May 2004:
614 Add support for TI OMAP5912 OSK Board
616 * Patch by Sam Song May, 07 May 2004:
617 Fix typo of UPM table for rmu board
619 * Patch by Pantelis Antoniou, 05 May 2004:
620 - Intracom board update.
623 * Add support for the second Ethernet interface for the 'PPChameleon'
626 * Patch by Dave Peverley, 30 Apr 2004:
627 Add support for OMAP730 Perseus2 Development board
629 * Patch by Alan J. Luse, 29 Apr 2004:
630 Fix flash chip-select (OR0) option register setting on FADS boards.
632 * Patch by Alan J. Luse, 29 Apr 2004:
633 Report MII network speed and duplex setting properly when
634 auto-negotiate is not enabled.
636 * Patch by Jarrett Redd, 29 Apr 2004:
637 Fix hang on reset on Ocotea board due to flash in wrong mode.
639 * Patch by Dave Peverley, 29 Apr 2004:
640 add MAC address detection to smc91111 driver
642 * Patch by David Müller, 28 Apr 2004:
643 fix typo in lib_arm/board.c
645 * Patch by Tolunay Orkun, 20 Apr 2004:
646 - README update: add CONFIG_CSB272 and csb272_config
647 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
648 i2cfast environment variable
650 * Patch by Yuli Barcohen, 19 Apr 2004:
651 - Rename DUET_ADS to MPC885ADS
652 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
653 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
654 - Clean up FADS family port to use the new defines
656 * Fix PCI support on CPC45 board
658 * Patch by Scott McNutt, 25 Apr 2004:
659 Add Nios GDB/JTAG Console support:
660 - Add stubs to support gdb via JTAG.
661 - Add support for console over JTAG.
664 * Add support for CATcenter board (based on PPChameleon ME module)
666 * Patch by Klaus Heydeck, 12 May 2004:
667 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
668 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
669 various changes to KUP4 board specific files
671 * Fix minor network problem on MPC5200: need some delay between
672 resetting the PHY and sending the first packet. Implemented in a
673 "natural" way by invoking the PHY reset and initialization code
674 only once after power on vs. each time the interface is brought up.
676 * Add some limited support for low-speed devices to SL811 USB controller
677 (at least "usb reset" now passes successfully and "usb info" displays
680 * Change init sequence for multiple network interfaces: initialize
681 on-chip interfaces before external cards.
683 * Fix memory leak in the NAND-specific JFFS2 code
685 * Fix SL811 USB controller when attached to a USB hub
687 * Fix config option spelling in PM520 config file
689 * Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
690 patches by Pantelis Antoniou, 30 Mar 2004)
692 * Fix minor NAND JFFS2 related issue
694 * Fixes for SL811 USB controller:
695 - implement workaround for broken memory stick
696 - improve error handling
698 * Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
699 cope with congested networks.
701 ======================================================================
702 Changes for U-Boot 1.1.1:
703 ======================================================================
705 * Patch by Travis Sawyer, 23 Apr 2004:
706 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
707 errata from Vitesse Semiconductor.
709 * Patch by Philippe Robin, 22 Apr 2004:
710 Fix ethernet configuration for "versatile" board
712 * Patch by Kshitij Gupta, 21 Apr 2004:
713 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
715 * Patch by Steven Scholz, 24 Feb 2004:
716 Fix a bug in AT91RM9200 ethernet driver:
717 The MII interface is now initialized before accessing the PHY.
719 * Patch by John Kerl, 19 Apr 2004:
720 Use U-boot's miiphy.h for PHY register names, rather than
721 introducing a new header file.
723 * Update pci_ids.h from linux-2.4.26
725 * Patch by Masami Komiya, 19 Apr 2004:
726 Fix problem cause by VLAN function on little endian architecture
727 without VLAN environment
729 * Clean up the TQM8xx_YYMHz configurations; allow to use the same
730 binary image for all clock frequencies. Implement run-time
731 optimization of flash access timing based on the actual bus
734 * Modify KUP4X board configuration to use SL811 driver for USB memory
735 sticks (including FAT / VFAT filesystem support)
737 * Add SL811 Host Controller Interface driver for USB
739 * Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
741 * Patch by Pantelis Antoniou, 19 Apr 2004:
742 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
743 Minor patches for Intracom boards.
745 * Patch by Christian Pell, 19 Apr 2004:
746 cleanup support for CF/IDE on PCMCIA for PXA25X
748 * Temporarily disabled John Kerl's extended MII command code because
749 "miivals.h" is missing
751 * Patches by Mark Jonas, 13 Apr 2004:
752 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
753 - Add sync instructions to IceCube SDRAM init code
754 - Move SDRAM chip constants into seperate include files
755 - Unify DDR and SDR initialization code
756 - Unify all IceCube (Lite5xxx) target names
758 * Patch by John Kerl, 16 Apr 2004:
759 Enable ranges in mii command, e.g. mii read 0-1f 0 or
760 mii read 4-7 18-1a. Also add mii dump subcommand for
761 pretty-printing standard regs 0-5.
763 * Patch by Stephen Williams, 16 April 2004:
764 fix typo in JSE.h; update MAINTAINERS
766 * Patch by Matthew S. McClintock, 14 Apr 2004:
767 fix initdram function for utx8245 board
769 * Patch by Markus Pietrek, 14 Apr 2004:
770 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
772 * Patch by Reinhard Meyer, 18 Apr 2004:
773 provide the IDE Reset Function for EMK 5200 boards
775 * Patch by Masami Komiya, 12 Apr 2004:
776 fix pci_hose_write_config_{byte,word}_via_dword problems
778 * Patch by Sangmoon Kim, 12 Apr 2004:
779 Update max RAM size for debris board
781 * Patch by Travis Sawyer, 08 Apr 2004:
782 Add TLB entry for second DIMM slot on ocotea
784 * Patch by Masami Komiya, 08 Apr 2004:
785 add RTL8169 network driver
787 * Patch by Dan Malek, 07 Apr 2004:
788 - Add support for RPC/STx GP3, Motorola 8560 board
789 - Update 85xx TSEC driver so it searches MII for first available PHY
791 - Add functions to support console MII commands.
793 * Patch by Tolunay Orkun, 07 Apr 2004:
794 Move initialization of bi_iic_fast[]
795 from board_init_f() to board_init_r()
797 * Patch by Yasushi Shoji, 07 Apr 2004:
798 Cleanup microblaze port
800 * Patch by Sangmoon Kim, 07 Apr 2004:
801 Add auto SDRAM module detection for Debris board
803 * Patch by Rune Torgersen, 06 Apr 2004:
804 - Fix some PCI problems on the MPC8266ADS board
805 - Fix the location of some PCI entries in the immap structure
807 * Patch by Yasushi Shoji, 07 Apr 2004:
808 - add support for microblaze processors
809 - add support for AtmarkTechno "suzaku" board
811 * Configure PPChameleon board to use redundand environment in flash
813 * Configure PPChameleon board to use JFFS2 NAND support.
815 * Added support for JFFS2 filesystem (read-only) on top of NAND flash
817 * Patch by Rune Torgersen, 16 Apr 2004:
820 * Patches by Pantelis Antoniou, 16 Apr 2004:
821 - add support for a new version of an Intracom board and fix
822 various other things on others.
823 - add verify support to the crc32 command (define
824 CONFIG_CRC32_VERIFY to enable it)
825 - fix FEC driver for MPC8xx systems:
826 1. fix compilation problems for boards that use dynamic
828 2. shut down FEC after network transfers
830 1. A new test command was added. This is a simplified version of
831 the one in the bourne shell.
832 2. A new exit command was added which terminates the current
834 3. Fixed handing of $? (exit code of last executed command)
835 - Fix some compile problems;
836 add "once" functionality for the netretry variable
838 * Patch by George G. Davis, 02 Apr 2004:
839 add support for Intel Assabet board
841 * Patch by Stephen Williams, 01 Apr 2004:
842 Add support for Picture Elements JSE board
844 * Patch by Christian Pell, 01 Apr 2004:
845 Add CompactFlash support for PXA systems.
847 * Patches by Pantelis Antoniou, 30 Mar 2004:
848 - add auto-complete support to the U-Boot CLI
849 - add support for NETTA and NETPHONE boards; fix NETVIA board
850 - add support for the Epson 156x series of graphical displays
851 (These displays are serial and not suitable for using a normal
852 framebuffer console on them)
853 - add infrastructure needed in order to POST any DSPs in a board
854 - improve and fix various things in the MPC8xx FEC driver:
855 1. The new 87x and 88x series of processors have two FECs,
856 and the new driver supports them both.
857 2. Another change in the 87x/88x series is support for
858 the RMII (Reduced MII) interface. However numerous
859 changes are needed to make it work since the PHYs
860 are connected to the same lines. That means that
861 you have to address them correctly over the MII
863 3. We now correctly match the MII/RMII interface
864 configuration to what the PHY reports.
865 - Fix problem when readingthe MII status register. Due to the
866 internal design of many PHYs you have to read the register
867 twice. The problem is more apparent in 10Mbit mode.
868 - add new mode ".jffs2s" for reading from a NAND device: it just
869 skips over bad blocks.
870 - add networking support for VLANs (802.1q), and CDP (Cisco
872 - some minor patches / cleanup
874 * Patch by Yuli Barcohen, 28 Mar 2004:
875 - Add support for MPC8272 family including MPC8247/8248/8271/8272
876 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
877 - Change configuration method for MPC8260ADS family
879 * add startup code to clear the BSS of standalone applications
881 * Fix if / elif handling bug in HUSH shell
883 ======================================================================
884 Changes for U-Boot 1.1.0:
885 ======================================================================
887 * Patch by Mark Jonas: Remove config.tmp files only when
888 unconfiguring the board
890 * Adapt RMU board for bigger flash memory
892 * Patch by Klaus Heydeck, 13 Mar 2003:
893 Add support for KUP4X Board
895 * Patch by Pavel Bartusek, 21 Mar 2004
898 * Patch by Hinko Kocevar, 20 Mar 2004
899 - Add auto-release for SMSC LAN91c111 driver
900 - Add save/restore of PTR and PNR regs as suggested in datasheet
902 * Patch by Stephen Williams, 19 March 2004
903 Increase speed of sector reads from SystemACE,
904 shorten poll timeout and remove a useless reset
906 * Patch by Tolunay Orkun, 19 Mar 2004:
907 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
910 * Patch by Brad Kemp, 18 Mar 2004:
911 prevent machine checks during a PCI scan
913 * Patch by Pierre Aubert, 18 Mar 2004:
914 Fix string cleaning in IDE identification
916 * Patch by Pierre Aubert, 18 Mar 2004:
917 - Unify video mode handling for Chips & Technologies 69000 Video
918 chip and Silicon Motion SMI 712/710/810 Video chip
919 - Add selection of the video output (CRT or LCD) via 'videoout'
920 environment variable for the Silicon Motion
923 * Patch by Pierre Aubert, 18 Mar 2004:
924 include/common.h typo fix
926 * Patches by Tolunay Orkun, 17 Mar 2004:
927 - Add support for bd->bi_iic_fast[] initialization via environment
928 variable "i2cfast" (CONFIG_I2CFAST)
929 - Add "i2cfast" u-boot environment variable support for csb272
931 * Patch by Carl Riechers, 17 Mar 2004:
932 Ignore '\0' characters in console input for use with telnet and
935 * Patch by Leon Kukovec, 17 Mar 2004:
936 typo fix for strswab prototype #ifdef
938 * Patches by Thomas Viehweger, 16 Mar 2004:
939 - show PCI clock frequency on MPC8260 systems
940 - add FCC_PSMR_RMII flag for HiP7 processors
941 - in do_jffs2_fsload(), take load address from load_addr if not set
942 explicit, update load_addr otherwise
943 - replaced printf by putc/puts when no formatting is needed
944 (smaller code size, faster execution)
946 * Patch by Phillippe Robin, 16 Mar 2004:
947 avoid dereferencing NULL pointer in lib_arm/armlinux.c
949 * Patch by Stephen Williams, 15 Mar 2004:
950 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
952 * Patch by Tolunay Orkun, 15 Mar 2004:
953 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
955 * Patch by Travis Sawyer, 15 Mar 2004:
956 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
958 * Add start-up delay to make sure power has stabilized before
959 attempting to switch on USB on SX1 board.
961 * Patch by Josef Wagner, 18 Mar 2004:
962 - Add support for MicroSys XM250 board (PXA255)
963 - Add support for MicroSys PM828 board (MPC8280)
964 - Add support for 32 MB Flash on PM825/826
965 - new SDRAM refresh rate for PM825/PM826
966 - added support for MicroSys PM520 (MPC5200)
967 - replaced Query by Identify command in CPU86/flash.c
970 * Fix wrap around problem with udelay() on ARM920T
972 * Add support for Macronix flash on TRAB board
974 * Patch by Pierre Aubert, 15 Mar 2004:
975 Fix buffer overflow in IDE identification
977 * Fix power-off of LCD for out-of-band temperatures on LWMON board
979 * Remove redundand #define in IceCube.h
981 * Patch by Steven Scholz, 27 Feb 2004:
982 - Adding get_ticks() and get_tbclk() for AT91RM9200
983 - Many white space fixes in cpu/at91rm9200/interrupts.c
985 * Patches by Steven Scholz, 20 Feb 2004:
986 some cleanup in AT91RM9200 related code
988 * Patches by Travis Sawyer, 12 Mar 2004:
989 - Fix Gigabit Ethernet support for 440GX
990 - Add Gigabit Ethernet Support to MII PHY utilities
992 * Patch by Brad Kemp, 12 Mar 2004:
993 Fixes for drivers/cfi_flash.c:
994 - Better support for x8/x16 implementations
995 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
996 - Added defines for AMD command and address constants
998 * Patch by Leon Kukovec, 12 Mar 2004:
999 Fix get_dentfromdir() to correctly handle deleted dentries
1001 * Patch by George G. Davis, 11 Mar 2004:
1002 Remove hard coded network settings in TI OMAP1610 H2
1003 default board config
1005 * Patch by George G. Davis, 11 Mar 2004:
1006 add support for ADS GraphicsClient+ board.
1008 * Patch by Pierre Aubert, 11 Mar 2004:
1009 - add bitmap command and splash screen support in cfb console
1010 - add [optional] origin in the bitmap display command
1012 * Patch by Travis Sawyer, 11 Mar 2004:
1013 Fix ocotea board early init interrupt setup.
1015 * Patch by Thomas Viehweger, 11 Mar 2004:
1016 Remove redundand code; add PCI-specific bits to include/mpc8260.h
1018 * Patch by Stephan Linz, 09 Mar 2004
1019 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
1021 * Patch by George G. Davis, 9 Mar 2004:
1022 fix recent build failure for SA1100 target
1024 * Patch by Travis Sawyer, 09 Mar 2004:
1025 Support native interrupt mode for the IBM440GX.
1026 Previously it was running in 440GP compatibility mode.
1028 * Patch by Philippe Robin, 09 Mar 2004:
1029 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
1032 * Patch by Masami Komiya, 08 Mar 2004:
1033 Don't overwrite server IP address or boot file name
1034 when the boot server does not return values
1036 * Patch by Tolunay Orkun, 5 Mar 2004:
1037 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
1039 * Patch by Tolunay Orkun, 5 Mar 2004:
1040 Fix early board initialization for Cogent CSB272 board
1042 * Patch by Ed Okerson, 3 Mar 2004:
1043 fix CFI flash writes for little endian systems
1045 * Patch by Reinhard Meyer, 01 Mar 2004:
1046 generalize USB and IDE support for MPC5200 with according
1047 changes to IceCube.h and TOP5200.h
1048 add Am29LV256 256 MBit FLASH support for TOP5200 boards
1049 add info about USB and IDE to README
1051 * Patch by Yuli Barcohen, 4 Mar 2004:
1052 Fix problems with GCC 3.3.x which changed handling of global
1053 variables explicitly initialized to zero (now in .bss instead of
1056 * Patch by Leon Kukovec, 02 Mar 2004:
1057 add strswab() to fix IDE LBA capacity, firmware and model numbers
1058 on little endian machines
1060 * Patch by Masami Komiya, 02 Mar 2004:
1061 - Remove get_ticks() from NFS code
1062 - Add verification of RPC transaction ID
1064 * Patch by Pierre Aubert, 02 Mar 2004:
1065 cleanup for IDE and USB drivers for MPC5200
1067 * Patch by Travis Sawyer, 01 Mar 2004:
1069 - Add IBM PPC440GX Ref Platform support (Ocotea)
1070 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
1071 Adapted to U-Boot and 440GX port
1073 - Add gracious handling of all Ethernet Pin Selections for 440GX
1074 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
1076 - Add needed bit definitions
1079 * Patch by Carl Riechers, 1 Mar 2004:
1080 Add PPC440GX prbdv0 divider to fix memory clock calculation.
1082 * Patch by Stephan Linz, 27 Feb 2004
1083 - avoid problems for targets without NFS download support
1085 * Patch by Rune Torgersen, 27 Feb 2004:
1086 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
1087 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
1088 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
1090 * Patch by Masami Komiya, 27 Feb 2004:
1091 Fix rarpboot: add autoload by NFS
1093 * Patch by Dan Eisenhut, 26 Feb 2004:
1094 fix flash_write return value in saveenv
1096 * Patch by Stephan Linz, 11 Dec 2003
1097 expand config.mk to avoid trigraph warnings on NIOS
1099 * Rename "BMS2003" board into "HMI10"
1101 * SX1 patches: use "serial#" for USB serial #; use redundand environment
1102 storage; auto-set console on USB port (using preboot command)
1104 * Add support for SX1 mobile phone; add support for USB-based console
1105 (enable with "setenv stdout usbtty; setenv stdin usbtty")
1107 * Fix LOWBOOT configuration for MPC5200 with DDR memory
1109 * Fix SDRAM timings for LITE5200 / IceCube board
1111 * Handle Auti-MDIX / connection status for INCA-IP
1113 * Fix USB problems when attempting to read 0 bytes
1115 * Patch by Travis Sawyer, 26 Feb 2004:
1116 Fix broken compile for XPEDITE1K target.
1118 * Patch by Stephan Linz, 26 Feb 2004:
1119 Bug fix for NFS code on NIOS targets
1121 * Patch by Stephen Williams, 26 Feb 2004:
1122 Break up SystemACE reads of large block counts
1124 * Patch by Pierre Aubert, 26 Feb 2004
1125 add IDE support for MPC5200
1127 * Patch by Masami Komiya, 26 Feb 2004:
1128 add autoload via NFS
1130 * Patch by Stephen Williams
1131 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
1132 elsewhere in the source.
1134 * Patch by Steven Scholz, 25 Feb 2004:
1135 - Timeouts in FPGA code should be based on CFG_HZ
1136 - Minor cleanup in code for Altera FPGA ACEX1K
1138 * Patch by Steven Scholz, 25 Feb 2004:
1139 Changed "Directory Hierarchy" section in README
1141 * Patch by Masami Komiya, 25 Feb 2004:
1142 Reduce copy count in nfs_read_reply() of NFS code
1144 * Patch by Markus Pietrek, 24 Feb 2004:
1145 NS9750 DevBoard added
1147 * Patch by Pierre Aubert, 24 Feb 2004
1148 add USB support for MPC5200
1150 * Patch by Steven Scholz, 24 Feb 2004:
1151 - fix MII commands to use values from last command
1153 * Patch by Torsten Demke, 24 Feb 2004:
1154 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
1156 * Patch by Rahul Shanbhag, 19 Feb 2004:
1157 Fixes for for OMAP1610 board:
1158 - shift some IRQ specific code to platform.S file
1159 - remove duplicatewatchdog reset code from start.S
1161 * Make Auto-MDIX Support configurable on INCA-IP board
1163 * Fix license for mkimage tool
1165 * Patch by Masami Komiya, 24 Feb 2004:
1166 Update NetBootFileXferSize in NFS code
1168 * Patch by Scott McNutt, 24 Feb 2004:
1169 fix packet length in NFS code
1171 * Patch by Masami Komiy, 22 Feb 2004:
1172 Add support for NFS for file download
1174 * Patch by Andrea Scian, 17 Feb 2004:
1175 Add support for S3C44B0 processor and DAVE B2 board
1177 * Patch by Steven Scholz, 20 Feb 2004:
1178 - Add support for MII commands on AT91RM9200 boards
1179 - some cleanup in AT91RM9200 ethernet code
1181 * Patch by Peter Ryser, 20 Feb 2004:
1182 Add support for the Xilinx ML300 platform
1184 * Patch by Stephan Linz, 17 Feb 2004:
1185 Fix watchdog support for NIOS
1187 * Patch by Josh Fryman, 16 Feb 2004:
1188 Fix byte-swapping for cfi_flash.c for different bus widths
1190 * Patch by Jon Diekema, 14 Jeb 2004:
1191 Remove duplicate "FPGA Support" notes from the README file
1193 * Patches by Reinhard Meyer, 14 Feb 2004:
1194 - update board/emk tree; use common flash driver
1195 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
1196 [adapted for other PPC CPUs -- wd]
1197 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
1199 * Patch by Jon Diekema, 13 Feb 2004:
1200 Call show_boot_progress() whenever POST "FAILED" is printed.
1202 * Patch by Nishant Kamat, 13 Feb 2004:
1203 Add support for TI OMAP1610 H2 Board
1204 Fixes for cpu/arm926ejs/interrupt.c
1205 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
1206 Fix for a timer bug in OMAP1610 Innovator
1207 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
1209 * Patches by Stephan Linz, 12 Feb 2004:
1210 - add support for NIOS timer with variable period preload counter value
1211 - prepare POST framework support for NIOS targets
1213 * Patch by Denis Peter, 11 Feb 2004:
1214 add POST support for the MIP405 board
1216 * Patch by Laurent Mohin, 10 Feb 2004:
1217 Fix buffer overflow in common/usb.c
1219 * Patch by Tolunay Orkun, 10 Feb 2004:
1220 Add support for Cogent CSB272 board
1222 * Patch by Thomas Elste, 10 Feb 2004:
1223 Add support for NET+50 CPU and ModNET50 board
1225 * Patch by Sam Song, 10 Feb 2004:
1226 Fix typos in cfi_flash.c
1228 * Patch by Leon Kukovec, 10 Feb 2004
1229 Fixed long dir entry slot id calculation in get_vfatname
1231 * Patch by Robin Gilks, 10 Feb 2004:
1232 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
1233 !=, <>, <, >, <=, >=)
1235 * Fix problem with side effects in macros in include/usb.h
1237 * Patch by David Benson, 13 Nov 2003:
1238 bug 841358 - fix TFTP download size limit
1240 * Fixing bug 850768:
1241 improper flush_cache() in load_serial()
1243 * Fixing bug 834943:
1244 MPC8540 - missing volatile declarations
1246 * Patch by Stephen Williams, 09 Feb 2004:
1247 Add support for Xilinx SystemACE chip:
1248 - New files common/cmd_ace.c and include/systemace.h
1249 - Hook systemace support into cmd_fat and the partition manager
1251 * Patch by Travis Sawyer, 09 Feb 2004:
1252 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
1254 * Patch by Travis Sawyer, 09 Feb 2004:
1256 - Fix PCI Indirect access for type 1 config cycles with ppc440.
1257 - Add phymode for 440 enet
1260 - Change board_pre_init to board_early_init_f
1261 - Add user flash to bus controller setup
1263 - Fix is_pci_host to check GPIO for monarch bit
1264 - Force xpedite1k to pci conventional mode (via #define option)
1266 * Patch by Brad Kemp, 4 Feb 2004:
1267 - handle the machine check that is generated during the PCI scans
1269 - define the registers used in the IMMR by the PCI subsystem.
1271 * Patch by Pierre Aubert, 03 Feb 2004:
1272 cpu/mpc5xxx/start.S: copy MBAR into SPR311
1274 * Patch by Jeff Angielski, 03 Feb 2004:
1275 Fix copy & paste error in cpu/mpc8260/pci.c
1277 * Patch by Reinhard Meyer, 24 Jan 2004:
1278 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
1280 * Add Auto-MDIX support for INCA-IP
1284 * Patch by Josef Baumgartner, 10 Feb 2004:
1285 Fixes for Coldfire port
1287 * Patch by Brad Kemp, 11 Feb 2004:
1288 Fix CFI flash driver problems
1290 * Make sure to use a bus clock divider of 2 only when running TQM8xxM
1291 modules at CPU clock frequencies above 66 MHz.
1293 * Optimize flash programming speed for LWMON (by another 100% :-)
1295 * Patch by Jian Zhang, 3 Feb 2004:
1296 - Changed the incorrect FAT12BUFSIZE
1297 - data_begin in fsdata can be negative. Changed it to be short.
1299 * Patches by Stephan Linz, 30 Jan 2004:
1300 1: - board/altera/common/flash.c:flash_erase():
1301 o allow interrupts befor get_timer() call
1302 o check-up each erased sector and avoid unexpected timeouts
1303 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
1304 o enclose sevenseg_set() in cpp condition
1305 - remove the ASMI configuration for DK1S10_standard_32 (never present)
1306 - fix some typed in mistakes in the NIOS documentation
1307 2: - split DK1C20 configuration into several header files:
1308 o two new files for each NIOS CPU description
1309 o U-Boot related part is remaining in DK1C20.h
1310 3: - split DK1S10 configuration into several header files:
1311 o two new files for each NIOS CPU description
1312 o U-Boot related part is remaining in DK1S10.h
1313 4: - Add support for the Microtronix Linux Development Kit
1314 NIOS CPU configuration at the Altera Nios Development Kit,
1315 Stratix Edition (DK-1S10)
1316 5: - Add documentation for the Altera Nios Development Kit,
1317 Stratix Edition (DK-1S10)
1318 6: - Add support for the Nios Serial Peripharel Interface (SPI)
1320 7: - Add support for the common U-Boot SPI framework at
1323 * Patch by Rahul Shanbhag, 28 Jan 2004:
1324 Fix flash protection/locking handling for OMAP1610 innovator board.
1326 * Patch by Rolf Peukert, 28 Jan 2004:
1327 fix flash write problems on CSB226 board (write with 32 bit bus width)
1329 * Patches by Mark Jonas, 16 Jan 2004:
1330 - fix rounding error when calculating baudrates for MPC5200 PSCs
1331 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
1332 time which is not supported
1334 * Patch by Yuli Barcohen, 26 Jan 2004:
1335 Allow bzip2 compression for small memory footprint boards
1337 * Patch by Brad Kemp, 21 Jan 2004:
1338 Add support for CFI flash driver for both the Intel and the AMD
1341 * Patch by Travis Sawyer, 20 Jan 2004:
1342 Fix pci bridge auto enumeration of sibling p2p bridges.
1344 * Patch by Tolunay Orkun, 12 Jan 2004:
1345 Add some delays as needed for Intel LXT971A PHY support
1347 * Patches by Stephan Linz, 09 Jan 2004:
1348 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
1349 - make DK1C20 board configuration related to ASMI conform to
1352 * Patch by Anders Larsen, 09 Jan 2004:
1354 ARM memory layout fixes: the abort-stack is now set up in the
1355 correct RAM area, and the BSS is zeroed out as it should be.
1357 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
1358 of the linker scripts are replaced by '__bss_start' and '_end',
1359 resp., which is a further step to eliminate unnecessary differences
1360 between the implementation of the CPU architectures.
1362 * Patch by liang a lei, 9 Jan 2004:
1363 Fix Intel 28F128J3 ID in include/flash.h
1365 * Patch by Masami Komiya, 09 Jan 2004:
1366 add support for TB0229 board (NEC VR4131 MIPS processor)
1368 * Patch by Leon Kukovec, 12 Dec 2003:
1369 changed extern __inline__ into static __inline__ in
1370 include/linux/byteorder/swab.h
1372 * Patch by Travis Sawyer, 30 Dec 2003:
1373 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
1374 select MDI port based on enabled EMAC device.
1375 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
1378 * Patch by Wolter Kamphuis, 15 Dec 2003:
1379 made CONFIG_SILENT_CONSOLE usable on all architectures
1381 * Disable date command on TQM866M - there is no RTC on MPC866
1383 * Fix variable CPU clock for MPC859/866 systems for low CPU clocks
1385 * Implement adaptive SDRAM timing configuration based on actual CPU
1386 clock frequency for INCA-IP; fix problem with board hanging when
1387 switching from 150MHz to 100MHz
1389 * Add PCMCIA CS support for BMS2003 board
1391 * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
1392 see doc/README.MPC866 for details;
1393 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
1394 calculate CPU clock frequency from PLL register values.
1396 * Add support for 128 MB RAM on TQM8xxL/M modules
1398 * Fix PS/2 keyboard problem caused by statically initialized variable
1399 pointing to a location in flash
1401 * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
1403 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
1404 before we can access it; add delay in case we are faster (with no
1407 * Cleanup of some init functions
1409 * Make sure SCC Ethernet is always stopped by the time we boot Linux
1410 to avoid Linux crashes by early packets coming in.
1412 * Accelerate flash accesses on LWMON board by using buffered writes
1414 * Fix typo in Makefile;
1415 fix problem with PARTNUM detection
1417 * Patch by Reinhard Meyer, 09 Jan 2004:
1418 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
1420 * Add support for IDE LED on BMS2003 board
1421 (exclusive with status LED!)
1423 * Add support for PS/2 keyboard (used with PS/2 multiplexor on
1426 * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
1427 Add common files for "emk" boards
1429 * Add a common get_ram_size() function and modify the the
1430 board-specific files to invoke that common implementation.
1432 ======================================================================
1433 Changes for U-Boot 1.0.1:
1434 ======================================================================
1436 * Set default clock for INCA-IP to 150 MHz
1438 * Make BMS2003 use a separate config file to avoid #ifdef mess;
1439 add I2C support; add support for DS1337 RTC
1441 * Add CompactFlash support for BMS2003 board
1443 * Add support for status LED on BMS2003 board
1445 * Patch by Scott McNutt, 02 Jan 2004:
1446 Add support for the Nios Active Serial Memory Interface (ASMI)
1449 * Patch by Andrea Marson, 16 Dec 2003:
1450 Add support for the PPChameleon ME and HI modules
1452 * Patch by Yuli Barcohen, 22 Dec 2003:
1453 Add support for Motorola DUET ADS board (MPC87x/88x)
1455 * Patch by Robert Schwebel, 15 Dec 2003:
1456 add support for cramfs (uses JFFS2 command interface)
1458 * Patches by Stephan Linz, 11 Dec 2003:
1459 - more documentation for NIOS port
1460 - new struct nios_pio_t, struct nios_spi_t
1461 - Reconfiguration for NIOS Development Kit DK1C20:
1462 o move board related code from board/dk1c20
1463 to board/altera/dk1c20
1464 o create a new common source path board/altera/common
1465 and move generic flash access stuff into it
1466 o change/expand configuration file DK1C20.h
1467 - Add support for NIOS Development Kit DK1S10
1468 - Add status LED support for NIOS systems
1469 - Add dual 7-segment LED support for Altera NIOS DevKits
1471 * Patch by Ronen Shitrit, 10 Dec 2003:
1472 Add support for the Marvell DB64360 / DB64460 development boards
1474 * Patch by Detlev Zundel, 10 Dec 2003:
1475 fix dependency problem in examples/Makefile
1477 * Patch by Denis Peter, 8 Dec 2003
1478 - add support for the PATI board (MPC555)
1479 - add SPI support for the MPC5xx
1481 * Patch by Anders Larsen, 08 Dec 2003:
1482 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
1483 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
1484 cleanup some redundand #defines
1486 * Patch by André Schwarz, 8 Dec 2003:
1487 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
1488 - TX and RX deskriptors must be quad-word aligned
1489 - does not work with only one TX deskriptor
1490 - standard reset method does not work
1492 * Patch by Masami Komiya, 08 Dec 2003:
1493 add RTL8139 ethernet driver
1495 * Patches by Ed Okerson, 07 Dec 2003:
1496 - fix ethernet for the AU1x00 processors in little-endian mode.
1497 - extend memsetup.S for the AU1x00 processors in BE and LE modes
1499 * Minor code cleanup (coding style)
1501 * Patch by Reinhard Meyer, 30 Dec 2003:
1502 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
1503 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
1504 - turned debug print of PHY registers into a function (called in two places)
1505 - added support for EMK MPC5200 based modules
1507 * Fix MPC8xx PLPRCR_MFD_SHIFT typo
1509 * Add support for TQM866M modules
1511 * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
1513 * Fix a few compiler warnings
1515 * Patch by Reinhard Meyer, 28 Dec 2003:
1516 Add initial support for TOP5200 board
1518 * Make CPU clock on ICA-IP board controllable by a "cpuclk"
1519 environment variable which can set to "100", "133", or "150". The
1520 CPU clock will be configured accordingly upon next reboot. Other
1521 values are ignored. In case of an invalid or undefined "cpuclk"
1522 value, the compile-time default CPU clock speed will be used.
1524 * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
1525 window that is used to access the UART registers by the Linux driver)
1527 * Patch by Reinhard Meyer, 20 Dec 2003:
1528 Fix clock calculation for the MPC5200 for higher clock frequencies
1529 (above 2**32 / 10 = 429.5 MHz).
1531 * Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
1533 * Fix IceCube CLKIN configuration (it's 33.000000MHz)
1535 * Add new configuration for IceCube board with DDR memory
1537 * Update TRAB memory configurations
1539 * Add JFFS2 support for INCA-IP board
1541 * Patch by Bill Hargen, 09 Dec 2003:
1542 - BUBINGA405EP: changed flash driver to protect top sector containing
1544 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
1545 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
1546 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
1547 - 405EP: added/fixed support for "reginfo" command.
1548 - 4xx: removed spurious MII error messages on "mii info" command.
1550 * Patch by Bernhard Kuhn, 28 Nov 2003:
1551 add support for Coldfire CPU
1552 add support for Motorola M5272C3 and M5282EVB boards
1554 * Patch by Pierre Aubert, 24 Nov 2003:
1555 - add a return value for the fpga command
1556 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
1557 is defined. If ide_preinit fails, ide_init is aborted.
1558 - fix an endianess problem in fat.h
1560 * Patch by Wolter Kamphuis, 05 Dec 2003:
1561 Add support for SNMC's QS850/QS823/QS860T boards
1563 * Patch by Yuli Barcohen, 3 Dec 2003:
1564 "revive" U-Boot support for old Motorola MPC860ADS board
1566 * Patch by Cam(ilo?), 03 Dec 2003:
1567 make examples build even with broken Montavista objcopy
1569 * Patch by Pavel Bartusek, 27 Nov 2003:
1570 fix conversion problem with "bootretry" evironment variable
1572 * Patch by Andre Schwarz, 24 Nov 2003:
1573 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
1575 * Patch by Pavel Bartusek, 21 Nov 2003:
1576 set ZMII bridge speed on 440
1578 * Patch by Anders Larsen, 17 Nov 2003:
1579 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
1581 * Patches by David Müller, 14 Nov 2003:
1582 - board/mpl/common/common_util.c
1583 * implement support for BZIP2 compressed images
1584 * various cleanups (printf -> puts, ...)
1585 - board/mpl/common/flash.c
1586 * report correct errors to upper layers
1587 * check the erase fail and VPP low bits in status reg
1588 - board/mpl/vcma9/cmd_vcma9.c
1589 - board/mpl/vcma9/flash.c
1590 * various cleanups (printf -> puts, ...)
1592 * fix typo in comment
1593 - cpu/arm920t/usb_ohci.c
1594 * support for S3C2410 is missing in #if line
1596 * reinit some registers in case of error (cable missing, ...)
1598 * support for USB/MMC devices is missing in #if line
1599 - include/configs/MIP405.h
1600 - include/configs/PIP405.h
1601 * enable BZIP2 support
1602 * enlarge malloc space to 1MiB because of BZIP2 support
1603 - include/configs/VCMA9.h
1604 * enable BZIP2 support
1605 * enlarge malloc space to 1MiB because of BZIP2 support
1606 * enable USB support
1607 - lib_arm/armlinux.c
1608 * change calling convention of ARM Linux kernel as
1609 described on http://www.arm.linux.org.uk/developer/booting.php
1611 * Patch by Thomas Lange, 14 Nov 2003:
1612 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
1613 support all these AMD boards.
1615 * Patch by Thomas Lange, 14 Nov 2003:
1616 Workaround for mips au1x00 physical memory accesses (the au1x00
1617 uses a 36 bit bus internally and cannot access physical memory
1618 directly. Use the uncached SDRAM address instead of the physical
1621 * Patch by Xue Ligong (Joe), 13 Nov 2003:
1622 add Realtek 8019 ethernet driver
1624 * Patch by Yuli Barcohen, 13 Nov 2003:
1625 MPC826xADS/PQ2FADS cleanup
1627 * Patch by Anders Larsen, 12 Nov 2003:
1628 Update README to mark the PORTIO commands non-standard
1630 * Patch by Nicolas Lacressonnière, 12 Nov 2003:
1631 update for for Atmel AT91RM9200DK development kit:
1632 - support for environment variables in DataFlash
1633 - Atmel DataFlash AT45DB1282 support
1635 * Patch by Jeff Carr, 11 Nov 2003:
1636 add support for new version of 8270 processors
1638 * Patches by George G. Davis, 05 Nov 2003:
1639 - only pass the ARM linux initrd tag to the kernel when an initrd
1641 - update omap1510inn configuration file
1643 * Patches by Stephan Linz, 3 Nov 2003:
1644 - more endianess fixes for LAN91C111 driver
1645 - CFG_HZ configuration patch for NIOS Cyclone board
1647 * Patch by Stephan Linz, 28 Oct 2003:
1648 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
1650 * Patch by Steven Scholz, 20 Oct 2003:
1651 - make "mii info <addr>" show infor for PHY at "addr" only
1652 - Endian fix for miiphy_info()
1654 * Patch by Gleb Natapov, 19 Sep 2003:
1655 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
1657 * Patch by Anders Larsen, 17 Sep 2003:
1658 Bring ARM memory layout in sync with the documentation:
1659 stack and malloc-heap are now located _below_ the U-Boot code
1661 * Accelerate booting on TRAB board: read and check autoupdate image
1662 headers first instead of always reading the whole images.
1664 * Fix type in MPC5XXX code (pointed out by Victor Wren)
1666 * Enabled password check on RMU board
1668 * Fix configuration problem with IceCube in LOWBOOT configuration:
1669 envrionment got embedded, corrupting the image layout.
1671 * Fix NEC display names (it's 6440 [for 640x480], not 6640).
1673 * Added BMS2003 board
1674 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
1676 * Fix flash driver for TRAB board (must use Unlock Bypass Reset
1677 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
1680 * Use "-fPIC" instead of "-mrelocatable" to prevent problems with
1683 * Add checksum verification to 'imls' command
1685 * Add bd_info fields needed for 4xx Linux I2C driver
1687 * Patch by Martin Krause, 4 Nov. 2003:
1688 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
1690 * Print used network interface when CONFIG_NET_MULTI is set
1692 * Patch by Bernhard Kuhn, 28 Oct 2003:
1693 Add low boot support for MPC5200
1695 * Fix problem with dual PCMCIA support (NSCU)
1697 * Fix MPC5200 I2C initialization function
1699 ======================================================================
1700 Changes for U-Boot 1.0.0:
1701 ======================================================================
1703 * Fix parameter passing to standalone images with bootm command
1705 * Patch by Kyle Harris, 30 Oct 2003:
1706 Fix build errors for ixdp425 board
1708 * Patch by David M. Horn, 29 Oct 2003:
1709 Fixes to build under CYGWIN
1711 * Get IceCube MGT5100 working (again)
1713 * Fix problems in memory test on some boards (which was not
1714 non-destructive as intended)
1716 * Patch by Gary Jennejohn, 28 Oct 2003:
1717 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
1718 to prevent stack overflow on ARM systems
1720 * Patch by Stephan Linz, 28 Oct 2003:
1721 fix init sequence error for NIOS port
1723 * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
1725 * Add CONFIG_VERSION_VARIABLE to TRAB configuration
1727 * Patch by Xiao Xianghua, 23 Oct 2003:
1728 small patch for mpc85xx
1730 * Fix small problem in MPC5200 I2C driver
1732 * Fix FCC3 support on ATC board
1734 * Correct header printing for multi-image files in do_bootm()
1736 * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
1738 * Fix PCI problems on PPChameleon board
1740 * Patch by Steven Scholz, 18 Oct 2003:
1741 Fix AT91RM9200 ethernet driver
1743 * Patch by Nye Liu, 17 Oct 2003:
1744 Fix typo in include/mpc8xx.h
1746 * Patch by Richard Woodruff, 16 Oct 03:
1747 Fixes for cpu/arm925/interrupt.c
1748 - Initialize timestamp & lastdec vars.
1749 - fix timestamp overflows.
1750 - fix lastdec overflow.
1751 - smarter normalization to allow udelay() below 1ms to work.
1753 * Patch by Scott McNutt, 16 Oct
1754 add networking support for the Altera Nios Development Kit,
1755 Cyclone Edition (DK-1C20)
1757 * Patch by Jon Diekema, 14 Oct 2003:
1758 add hint about doc/README.silent to README file
1760 * Add CompactFlash support for NSCU
1762 * Fix PCI problems on PPChameleonEVB
1764 * TRAB auto-update: Base decision if we have to strip the image
1765 header on image type as encoded in the header
1766 (include image type patch by Martin Krause, 17 Oct 2003)
1768 * Patches by Xianghua Xiao, 15 Oct 2003:
1770 - Added Motorola CPU 8540/8560 support (cpu/85xx)
1771 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
1772 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
1774 * Fix flash timings on TRAB board
1776 * Make sure HUSH is initialized for running auto-update scripts
1778 * Make 5200 reset command _really_ reset the board, without running
1779 any other code after it
1781 * Fix errors with flash erase when range spans across banks
1782 that are mapped in reverse order
1784 * Fix flash mapping and display on P3G4 board
1786 * Patch by Kyle Harris, 15 Jul 2003:
1787 - add support for Intel IXP425 CPU
1788 - add support for IXDP425 eval board
1790 * Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
1791 for more information
1793 * Patch by Steven Scholz, 10 Oct 2003
1794 - Add support for Altera FPGA ACEX1K
1796 * Patches by Thomas Lange, 09 Oct 2003:
1797 - fix cmd_ide.c for non ppc boards (read/write functions did not
1798 add ATA base address)
1799 - fix for shannon board
1800 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
1801 - Endian swap ATA identity for all big endian CPUs, not just PPC
1802 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
1804 - add support for dbau1x00 board (MIPS32)
1806 * Patch by Sangmoon Kim, 07 Oct 2003:
1807 add support for debris board
1809 * Patch by Martin Krause, 09 Oct 2003:
1810 Fixes for TRAB board
1811 - /board/trab/rs485.c: correct baudrate
1812 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
1813 udelay(); fix some timing problems with adc controller
1814 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
1815 modify commands: touch and buzzer
1817 * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
1818 (quick & dirty workaround for rogue pointer problem in get_vfatname());
1819 Use direct function calls for auto_update instead of hush commands
1821 * Patch by Scott McNutt, 04 Oct 2003:
1822 - add support for Altera Nios-32 CPU
1823 - add support for Nios Cyclone Development Kit (DK-1C20)
1825 * Patch by Steven Scholz, 29 Sep 2003:
1826 - A second parameter for bootm overwrites the load address for
1827 "Standalone Application" images.
1828 - bootm sets environment variable "filesize" to the resulting
1829 (uncompressed) data length for "Standalone Application" images
1830 when autostart is set to "no". Now you can do something like
1831 if bootm $fpgadata $some_free_ram ; then
1832 fpga load 0 $some_free_ram $filesize
1835 * Patch by Denis Peter, 25 Sept 2003:
1836 add support for the MIP405 Rev. C board
1838 * Patch by Yuli Barcohen, 25 Sep 2003:
1839 add support for Zephyr Engineering ZPC.1900 board
1841 * Patch by Anders Larsen, 23 Sep 2003:
1842 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
1843 implemented for the x86 architecture)
1845 * Patch by Sangmoon Kim, 23 Sep 2003:
1846 fix pll_pci_to_mem_multiplier table for MPC8245
1848 * Patch by Anders Larsen, 22 Sep 2003:
1849 enable timed autoboot on PXA
1851 * Patch by David Müller, 22 Sep 2003:
1852 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
1853 returns correct libgcc file path
1854 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
1855 time on s3c24x0 systems
1857 * Patch by Jon Diekema, 19 Sep 2003:
1858 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
1859 link state to the fault LED.
1860 - In NetLoop, make the Fault LED reflect the link status. The link
1861 status gets updated on entry, and on timeouts.
1863 * Patch by Anders Larsen, 18 Sep 2003:
1864 allow mkimage to build and run on Cygwin-hosted systems
1866 * Patch by Frank Müller, 18 Sep 2003:
1867 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
1870 * Patch by Pantelis Antoniou, 16 Sep 2003:
1871 add tool to compute fileds in the PLPRCR register for MPC86x
1873 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
1875 * Fix build problems under FreeBSD
1877 * Add generic filesystem image type
1879 * Make fatload set filesize environment variable
1881 * enable basic / medium / high-end configurations for PPChameleonEVB
1882 board; fix NAND code
1884 * enable TFTP client code to specify to the server the desired
1885 timeout value (see RFC-2349)
1887 * Improve SDRAM setup for TRAB board
1889 * Suppress all output with splashscreen configured only if "splashimage"
1892 * Fix problems with I2C support for mpc5200
1894 * Adapt TRAB configuration and auto_update to new memory layout
1896 * Add configuration for wtk board
1898 * Add support for the Sharp LQ065T9DR51U LCD display
1900 * Patch by Rune Torgersen, 17 Sep 2003:
1901 - Fixes for MPC8266 default config
1902 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
1904 * Patches by Jon Diekema, 17 Sep 2003:
1905 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
1908 - adjust "help" output
1910 * Patches by Anders Larsen, 17 Sep 2003:
1911 - fix spelling errors
1912 - set GD_FLG_DEVINIT flag only after device function pointers
1914 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
1916 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
1917 - trigger watchdog while waiting in serial driver
1919 * Add auto-update code for TRAB board using USB memory sticks,
1920 support new configuration with more memory
1922 * disable MPC5200 bus pipelining as workaround for bus contention
1924 * Modify XLB arbiter priorities on MPC5200 so all devices use same
1925 priority; configure critical interrupts to be handled like external
1928 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
1929 go back to 66 MHz for stability
1931 * Patches by Jon Diekema, 15 Sep 2003:
1932 - add description for missing CFG_CMD_* entries in the README file
1935 * Patch by Gleb Natapov, 14 Sep 2003:
1936 enable watchdog support for all MPC824x boards that have a watchdog
1938 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
1939 "Non-octet Aligned Frame" errors we see at 100 Mbps
1941 * Patch by Sharad Gupta, 14 Sep 2003:
1942 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
1944 * Patch by llandre, 11 Sep 2003:
1945 update configuration for PPChameleonEVB board
1947 * Patch by David Müller, 13 Sep 2003:
1948 various changes to VCMA9 board specific files
1950 * Add I2C support for MGT5100 / MPC5200
1952 * Patch by Rune Torgersen, 11 Sep 2003:
1953 Changed default memory option on MPC8266ADS to NOT be Page Based
1954 Interleave, since this doesn't work very well with the standard
1957 * Patch by George G. Davis, 12 Sep 2003:
1958 fix Makefile settings for sk98 driver
1960 * Patch by Stefan Roese, 12 Sep 2003:
1961 - new boards added: DP405, HUB405, PLU405, VOH405
1962 - some esd boards updated
1963 - cpu/ppc4xx/sdram.c: disable memory controller before setting
1965 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
1967 * Patch by Martin Krause, 11 Sep 2003:
1968 add burn-in tests for TRAB board
1970 * Enable instruction cache on MPC5200 board
1972 * Patch by Denis Peter, 11 Sep 2003:
1973 - fix USB data pointer assignment for bulk only transfer.
1974 - prevent to display erased directories in FAT filesystem.
1976 * Change output format for NAND flash - make it look like for other
1979 ======================================================================
1980 Changes for U-Boot 0.4.8:
1981 ======================================================================
1983 * Add I2C and RTC support for RMU board
1985 * Patches by Denis Peter, 9 Sep 2003:
1986 add FAT support for IDE, SCSI and USB
1988 * Patches by Gleb Natapov, 2 Sep 2003:
1989 - cleanup of POST code for unsupported architectures
1990 - MPC824x locks way0 of data cache for use as initial RAM;
1991 this patch unlocks it after relocation to RAM and invalidates
1994 * Patch by Gleb Natapov, 30 Aug 2003:
1995 new I2C driver for mpc107 bridge. Now works from flash.
1997 * Patch by Dave Ellis, 11 Aug 2003:
1998 - JFFS2: fix typo in common/cmd_jffs2.c
1999 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
2000 - JFFS2: remove node version 0 warning
2001 - JFFS2: accept JFFS2 PADDING nodes
2002 - SXNI855T: add AM29LV800 support
2003 - SXNI855T: move environment from EEPROM to flash
2004 - SXNI855T: boot from JFFS2 in NOR or NAND flash
2006 * Patch by Bill Hargen, 11 Aug 2003:
2007 fixes for I2C on MPC8240
2008 - fix i2c_write routine
2009 - fix iprobe command
2010 - eliminates use of global variables, plus dead code, cleanup.
2012 * Add support for USB Mass Storage Devices (BBB)
2013 (tested with USB memory sticks only)
2015 * Avoid flicker on TRAB's VFD
2017 * Add support for SK98xx driver
2019 * Add PCI support for SL8245 board
2021 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
2022 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
2023 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
2025 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
2026 to allow for more accurate baudrate settings
2027 (error now 0.7% at 115 kbps, instead of 3.5% before)
2029 * Patch by Andreas Mohr, 4 Sep 2003:
2030 Fix a lot of spelling errors
2032 * Add support for PPChameleon Eval Board
2034 * Add support for P3G4 board
2036 * Fix problem with MGT5100 FEC driver: add "early" MAC address
2039 * Patch by Yuli Barcohen, 7 Aug 2003:
2040 check BCSR to detect if the board is configured in PCI mode
2042 ======================================================================
2043 Changes for U-Boot 0.4.7:
2044 ======================================================================
2046 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
2047 add support for Adder II MPC852T module
2049 * Patch by George G. Davis, 19 Aug 2003:
2050 fix TI Innovator/OMAP1510 pin configs
2052 * Patches by Kshitij, 18 Aug 2003
2053 - add support for arm926ejs cpu core
2054 - add support for TI OMAP 1610 Innovator Board
2056 * Patch by Yuli Barcohen, 14 Aug 2003:
2057 add support for bzip2 uncompression
2059 * Add GCC library to examples/Makefile so GCC utility functions will
2062 * Add I2C and RTC support for RMU board using software I2C driver
2063 (because of better response to iprobe command); fix problem with
2066 * Patch by Matthias Fuchs, 28 Aug 2003:
2067 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
2068 CONFIG_BOOTP_MAKS (see README).
2070 * Fix ICU862 environment problem
2072 * Fix RAM size detection for RMU board
2074 * Implement "reset" for MGT5100/MPC5200 systems
2076 ======================================================================
2077 Changes for U-Boot 0.4.6:
2078 ======================================================================
2080 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
2081 allow selection of clock frequency as "make" target
2083 * Implement memory autosizing code for IceCube boards
2085 * Configure network port on INCA-IP for autonegotiation
2087 * Fix overflow problem in network timeout code
2089 * Patch by Richard Woodruff, 8 Aug 2003:
2090 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
2092 ======================================================================
2093 Changes for U-Boot 0.4.5:
2094 ======================================================================
2096 * Update for TQM board defaults:
2097 disable clocks_in_mhz, enable boot count limit
2099 * Removed tools/gdb from "make all" target. Added make target "gdbtools"
2100 in toplevel directory instead. Removed astest.c from tools/gdb because
2101 it is no longer relevant.
2103 * Fix PCI support for MPC5200 / IceCube Board
2105 * Map ISP1362 USB OTG controller for NSCU board
2107 * Patch by Brad Parker, 02 Aug 2003:
2108 fix sc520_cdp problems
2110 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
2112 * Allow erase command to cross flash bank boundaries
2114 * Patch by Scott McNutt, 21 Jul 2003:
2115 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
2116 Both LynxOS and BlueCat linux KDIs are supported.
2118 * Patch by Richard Woodruff, 25 Jul 2003:
2119 use more reliable reset for OMAP/925T
2121 * Patch by Nye Liu, 25 Jul 2003:
2122 fix typo in mpc8xx.h
2124 * Patch by Richard Woodruff, 24 Jul 2003:
2125 Fixes for cmd_nand.c:
2126 - Fixed null dereferece which could result in incorrect ECC values.
2127 - Added support for devices with no Ready/Busy signal hooked up.
2128 - Added OMAP1510 read/write protect handling.
2129 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
2131 - Switched default ECC to be JFFS2.
2133 * Allow crc32 to be used at address 0x000
2135 * Provide consistent interface to standalone applications to access
2136 the 'global_data' structure
2137 Provide a doc/README.standalone more useful to users/developers.
2139 * Make IceCube MGT5100 FEC driver work
2141 * Implement new mechanism to export U-Boot's functions to standalone
2142 applications: instead of using (PPC-specific) system calls we now
2143 use a jump table; please see doc/README.standalone for details
2145 * Patch by Dave Westwood, 24 Jul 2003:
2146 added support for Unity OS (a proprietary OS)
2148 * Patch by Detlev Zundel, 23 Jul 2003:
2149 add "imls" command to print flash table of contents
2151 * Fix cold boot detection for log buffer reset
2153 * Return error for invalid length specifiers with "cp.X" etc.
2155 * Fix startup problem on MIPS
2157 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
2158 bitmap support is configured
2160 * Patch by Bill Hargen, 18 Jul 2003:
2161 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
2163 * Patch by Denis Peter, 18 Jul 2003:
2164 - fix memory configuration for MIP405T
2165 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
2167 * Cleanup of TQM82xx configurations; use "official" board types
2168 to make selection easier.
2170 * Patch by Martin Krause, 17 Jul 2003:
2171 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
2173 * Patch by Richard Woodruff, 17 July 03:
2174 - Fixed bug in OMAP1510 baud rate divisor settings.
2176 * Patch by Nye Liu, 16 July 2003:
2178 - add MPC86xADS support (uses MPC86xADS.h)
2179 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
2181 o BRG changes (EXTAL/XTAL restricted to 10MHz)
2182 o don't trust gclk() software measurement by default, depend on
2183 CONFIG_8xx_GCLK_FREQ
2184 - add DRAM SIMM not installed detection
2185 - use more "correct" SDRAM initialization sequence
2186 - allow different SDRAM sizes (8xxADS has 8M)
2188 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
2189 - rename MAMR/MBMR defines to be more consistent. Should eventually
2190 be merged into MxMR to better reflect the PowerQUICC datasheet.
2192 * Patch by Yuli Barcohen, 16 Jul 2003:
2193 support new Motorola PQ2FADS-ZU evaluation board which replaced
2194 MPC8260ADS and MPC8266ADS
2196 ======================================================================
2197 Changes for U-Boot 0.4.4:
2198 ======================================================================
2200 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
2202 * Add support for MGT5100 and MPC5200 processors
2204 * Patch by Lutz Dennig, 15 Jul 2003:
2205 update for R360MPI board
2207 ======================================================================
2208 Changes for U-Boot 0.4.3:
2209 ======================================================================
2211 * Patches by Kshitij, 04 Jul 2003
2212 - added support for arm925t cpu core
2213 - added support for TI OMAP 1510 Innovator Board
2215 * Patches by Martin Krause, 14 Jul 2003:
2216 - add I2C support for s3c2400 systems (trab board)
2217 - (re-) add "ping" to command table
2219 * Fix handling of "slow" POST routines
2221 * Patches by Yuli Barcohen, 13 Jul 2003:
2222 - Correct flash and JFFS2 support for MPC8260ADS
2223 - fix PVR values and clock generation for PowerQUICC II family
2226 * Patch by Bernhard Kuhn, 08 Jul 2003:
2227 - add support for M68K targets
2229 * Patch by Ken Chou, 3 Jul:
2230 - Fix PCI config table for A3000
2231 - Fix iobase for natsemi.c
2232 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
2234 * Allow to enable "slow" POST routines by key press on power-on
2235 * Fix temperature dependend switching of LCD backlight on LWMON
2236 * Tweak output format for LWMON
2238 * Patch by Stefan Roese, 11 Jul 2003:
2239 - Fix bug in CONFIG_VERSION_VARIABLE.
2240 - AR405 config updated.
2241 - OCRTC/ORSG: bsp command added.
2242 - ASH405 bsp update.
2244 ======================================================================
2245 Changes for U-Boot 0.4.2:
2246 ======================================================================
2248 * Add support for NSCU board
2250 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
2252 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
2253 mirror bit flash on TQM8xxM modules
2255 * Patch by Kenneth Johansson, 30 Jun 2003:
2256 get rid of MK_CMD_ENTRY macro; update doc/README.command
2258 * Patch by Seb James, 30 Jun 2003:
2259 Improve documentation of I2C configuration in README
2261 * Fix problems with previous log buffer "fixes"
2263 * Fix minor help text issues
2265 * "log append" did not append a newline
2267 ======================================================================
2268 Changes for U-Boot 0.4.1:
2269 ======================================================================
2271 * Fix some missing commands, cleanup header files
2272 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
2274 * Rewrite command lookup and help command (fix problems with bubble
2275 sort when sorting command name list). Minor cleanup here and there.
2277 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
2278 - Allow to call sysmon function interactively
2279 - PIC on LWMON board needs delay after power-on
2280 - Add missing RSR definitions for MPC8xx
2281 - Improve log buffer handling: guarantee clean reset after power-on
2282 - Add support for EXBITGEN board (aka "genie")
2283 - Add support for SL8245 board
2286 - remove trailing white space, trailing empty lines, C++ comments, etc.
2287 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
2289 * Patches by Kenneth Johansson, 25 Jun 2003:
2290 - major rework of command structure
2291 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2293 ======================================================================
2294 Changes for U-Boot 0.4.0:
2295 ======================================================================
2297 * Patches by Robert Schwebel, 26 Jun 2003:
2298 - csb226 configuration updated
2299 - credits for logodl port updated
2300 - innokom configuration updated
2301 - logodl tree update, still with coding style inconsistencies
2302 - added OCM for ppc405 warning to README
2304 * Patch by Pantelis Antoniou, 25 Jun 2003:
2305 update NetVia with V2 board support
2307 * Header file cleanup for ARM
2309 * Patch by Murray Jensen, 24 Jun 2003:
2310 - make sure to use only U-boot provided header files
2311 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
2313 * Patch by Stefan Roese, 24 Jun 2003:
2314 - Update esd ASH405 board files.
2315 - Update esd DASA_SIM config file.
2316 - Add ping command to some esd boards.
2318 * Patch by Yuli Barcohen, 23 Jun 2003:
2319 Update for MPC8260ADS board
2321 * Patch by Murray Jensen, 23 Jun 2003:
2322 - cleanup of GCC 3.x compiler warnings
2324 * Patch by Rune Torgersen, 4 Jun 2003:
2325 add large memory support for MPC8266ADS board
2327 * Patch by Richard Woodruff, 19 June 03:
2328 - Enabled standard u-boot device abstraction for ARM
2329 - Enabled console device for ARM
2330 - Initilized bi_baudrate for ARM
2332 * Patch by Bill Hargen, 23 Apr 2003:
2333 fix byte order for 824x I2C addresses (write op)
2335 * Patch by Murray Jensen, 20 Jun 2003:
2337 - cleanup (especially for gcc-3.x compilers)
2339 * Patch by Tom Guilliams, 20 Jun 2003:
2340 added CONFIG_750FX support for IBM 750FX processors
2342 * Patch by Devin Crumb, 02 Apr 2003:
2343 Fix clock divider rounding problem in drivers/serial.c
2345 * Patch by Richard Woodruff, 19 June 03:
2346 - Fixed smc91c111 driver to sync with the u-boot environment
2347 (driver/smc91c111.c).
2348 - Added eth_init error return check in NetLoop (net/net.c).
2350 * Patch by Ken Chou, 19 June 2003:
2351 Added support for A3000 SBC board (Artis Microsystems Inc.)
2353 * Patches by Murray Jensen, 17 Jun 2003:
2354 - Hymod board database mods: add "who" field and new xilinx chip types
2355 - provide new "init_cmd_timeout()" function so code external to
2356 "common/main.c" can use the "reset_cmd_timeout()" function before
2357 entering the main loop
2358 - add DTT support for adm1021 (new file dtt/adm1021.c; config
2359 slightly different. see include/configs/hymod.h for an example
2360 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
2361 CFG_DTT_ADM1021 defined)
2362 - add new "eeprom_probe()" function which has similar args and
2363 behaves in a similar way to "eeprom_read()" etc.
2364 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
2365 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
2366 - gdbtools copyright update
2367 - ensure that set_msr() executes the "sync" and "isync" instructions
2368 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
2369 - 8260 I/O ports fix: Open Drain should be set last when configuring
2370 - add SIU IRQ defines for 8260
2371 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
2372 config.mk to allow board configurations to override the GNU
2373 linker script, selected via the LDSCRIPT, make variable, and to
2374 give an initial value to the OBJCFLAGS make variable
2375 - 8260 i2c enhancement:
2376 o correctly extends the timeout depending on the size of all
2377 queued messages for both transmit and receive
2378 o will not continue with receive if transmit times out
2379 o ensures that the error callback is done for all queued tx
2381 o correctly detects both tx and rx timeouts, only delivers one to
2382 the callback, and does not overwrite an earlier error
2383 o logic in i2c_probe now correct
2384 - add "vprintf()" function so that "panic()" function can be
2386 - many Hymod board changes
2388 * Patches by Robert Schwebel, 14 Jun 2003:
2389 - add support for Logotronic DL datalogger board
2390 - cleanup serial line after kermit binary download
2391 - add debugX macro (debug level support)
2392 - update mach-types.h to latest arm.linux.org.uk master list.
2394 * Patches by David Müller, 12 Jun 2003:
2395 - rewrite of the S3C24X0 register definitions stuff
2396 - "driver" for the built-in S3C24X0 RTC
2398 * Patches by Yuli Barcohen, 12 Jun 2003:
2399 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
2400 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
2401 configuration word supplied by FPGA on some MPC8260ADS boards
2403 * Patch by Pantelis Antoniou, 10 Jun 2003:
2404 Unify status LED interface
2406 * Add support for DS12887 RTC; add RTC support for ATC board
2408 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
2409 Modifications for Atmel AT91RM9200DK ARM920T based development kit
2410 - Add Atmel DataFlash support for reading and writing.
2411 - Add possibility to boot a Linux from DataFlash with BOOTM command.
2412 - Add Flash detection on Atmel AT91RM9200DK
2413 (between Atmel AT49BV1614 and AT49BV1614A flashes)
2414 - Replace old Ethernet PHY layer functions
2415 - Change link address
2417 * Patch by Frank Smith, 9 Jun 2003:
2418 use CRIT_EXCEPTION for machine check on 4xx
2420 * Patch by Detlev Zundel, 13 Jun 2003:
2421 added implementation of the "carinfo" command in cmd_immap.c
2423 * Fix CONFIG_NET_MULTI support in include/net.h
2425 * Patches by Kyle Harris, 13 Mar 2003:
2426 - Add FAT partition support
2427 - Add command support for FAT
2428 - Add command support for MMC
2430 - Add Intel PXA support for video
2431 - Add Intel PXA support for MMC
2433 - Enable MMC and FAT for lubbock board
2434 - Other misc changes for lubbock board
2436 * Patch by Robert Schwebel, April 02, 2003:
2437 fix for SMSC91111 driver
2439 * Patch by Vladimir Gurevich, 04 Jun 2003:
2440 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
2442 * Patch by Stefan Roese, 05 Jun 2003:
2443 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
2444 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
2445 data cache can be used even if the chip select is in use.
2446 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
2447 (see README for further description).
2448 - Changed config files of CONFIG_EEPRO100 boards to use the
2449 CFG_RX_ETH_BUFFER define.
2451 * Add support for RMU board
2453 * Add support for TQM862L at 100/50 MHz
2455 * Patch by Pantelis Antoniou, 02 Jun 2003:
2456 major reconstruction of networking code;
2457 add "ping" support (outgoing only!)
2459 * Patch by Denis Peter, 04 June 2003:
2460 add support for the MIP405T board
2462 * Patches by Udi Finkelstein, 2 June 2003:
2463 - Added support for custom keyboards, initialized by defining a
2464 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
2465 - Added support for the RBC823 board.
2466 - cpu/mpc8xx/lcd.c now automatically calculates the
2467 Horizontal Pixel Count field.
2469 * Fix alignment problem in BOOTP (dhcp_leasetime option)
2470 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
2472 * Patch by Mark Rakes, 14 May 2003:
2473 add support for Intel e1000 gig cards.
2475 * Patch by Nye Liu, 3 Jun 2003:
2476 fix critical typo in MAMR definition (include/mpc8xx.h)
2478 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
2480 * Patch by Klaus Heydeck, 2 Jun 2003
2481 Minor changes for KUP4K configuration
2483 * Patch by Marc Singer, 29 May 2003:
2484 Fixed rarp boot method for IA32 and other little-endian CPUs.
2486 * Patch by Marc Singer, 28 May 2003:
2487 Added port I/O commands.
2489 * Patch by Matthew McClintock, 28 May 2003
2490 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
2491 - minor patches for utx8245
2493 * Patch by Daniel Engström, 28 May 2003:
2496 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
2497 add nand flash support to SXNI855T configuration
2498 fix/extend nand flash support:
2499 - fix 'nand erase' command so does not erase bad blocks
2500 - fix 'nand write' command so does not write to bad blocks
2501 - fix nand_probe() so handles no flash detected properly
2502 - add doc/README.nand
2503 - add .jffs2 and .oob options to nand read/write
2504 - add 'nand bad' command to list bad blocks
2505 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
2506 - make NAND read/write faster
2508 * Patch by Rune Torgersen, 23 May 2003:
2509 Update for MPC8266ADS board
2511 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
2512 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
2513 _time_ (!) if the environment is embedded within the U-Boot image,
2514 or in a separate flash sector.
2516 * Cleanup CFG_DER #defines in config files (wd maintained only)
2518 * Fix data abort exception handling for arm920t CPU
2520 * Fix alignment problems with flash driver for TRAB board
2522 * Patch by Donald White, 21 May 2003:
2523 fix calculation of base address in pci_hose_config_device()
2525 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
2526 execute "cmd2", even if "cmd1" fails. Note that this is different
2527 to "run var1 var2" where the contents of "var2" will NOT be
2528 executed when a command in "var1" fails.
2530 * Add zero-copy ramdisk support (requires corresponding kernel support!)
2532 * Patch by Kyle Harris, 20 May 2003:
2533 In preparation for an ixp port, rename cpu/xscale and arch-xscale
2534 into cpu/pxa and arch-pxa.
2536 * Patch by Stefan Roese, 23 May 2003:
2537 - IBM PPC405EP port added.
2538 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
2539 UART0) is used as default U-Boot console. PPC4xx only!
2540 - esd ASH405 board added (PPC405EP based).
2541 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
2542 - esd CPCI405AB board added.
2543 - esd PMC405 board added.
2544 - Update of some esd boards.
2546 * Patch by Denis Peter, 19 Mai 2003:
2547 add support for the MIP405-3 board
2549 * Patch by Dave Ellis, 22 May 2003:
2550 Fix problem with only partially cleared .bss segment
2552 * Patch by Rune Torgersen, 12 May 2003:
2553 get PCI to work on a MPC8266ADS board; incorporate change to
2554 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
2556 * Patch by Nye Liu, 1 May 2003:
2557 minor patches for the FADS8xx
2559 * Patch by Thomas Schäfer, 28 Apr 2003:
2560 Fix SPD handling for 256 ECC DIMM on Walnut
2562 * Add support for arbitrary bitmaps for TRAB's VFD command;
2563 allow to pass boot bitmap addresses in environment variables;
2564 allow for zero boot delay
2566 * Patch by Christian Geißinger, 19 May 2002:
2567 On TRAB: wait until the dummy byte has been completely sent
2569 * Patch by David Updegraff, 22 Apr 2003:
2570 update for CrayL1 board
2572 * Patch by Pantelis Antoniou, 21 Apr 2003:
2573 add boot support for ARTOS (a proprietary OS)
2575 * Patch by Steven Scholz, 11 Apr 2003:
2576 Add support for RTC DS1338
2578 * Patch by Rod Boyce, 24 Jan 2003:
2579 Fix counting of extended partitions in diskboot command
2581 * Patch by Christophe Lindheimer, 20 May 2003:
2582 allow the use of CFG_LOADS when CFG_NO_FLASH is set
2584 * Fix SDRAM timing on Purple board
2586 * Add support for CompactFlash on ATC board
2587 (includes support for Intel 82365 and compatible PC Card controllers,
2588 and Yenta-compatible PCI-to-CardBus controllers)
2590 * Patch by Mathijs Haarman, 08 May 2003:
2591 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
2593 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
2595 * Add support for Promess ATC board
2597 * Patch by Keith Outwater, 28 Apr 2003:
2598 - Miscellaneous corrections and additions to GEN860T board specific code.
2599 - Added GEN860_SC variant to GEN860T.
2600 - Miscellaneous corrections to GEN860T documentation.
2601 - Correct duplicate entry in U-Boot CREDITS file.
2602 - Add GEN860T_SC entry in MAINTAINERS file.
2603 - Update CREDITS file with GEN860T_SC info.
2605 * Update Smiths Aerospace addresses in MAINTAINERS file
2607 * Fix error handling in hush's version of "run" command
2610 - Splashscreen support
2613 - temperature dependend enabling of LCD
2615 * Allow booting from old "PPCBoot" disk partitions
2617 * Add support for TQM8255 Board / MPC8255 CPU
2619 ======================================================================
2620 Changes for U-Boot 0.3.1:
2621 ======================================================================
2623 * Make sure Block Lock Bits get cleared in R360MPI flash driver
2625 * MPC823 LCD driver: Fill color map backwards, to allow for steady
2626 display when Linux takes over
2628 * Patch by Erwin Rol, 27 Feb 2003:
2629 Add support for RTEMS (this time for real).
2631 * Add support for "bmp info" and "bmp display" commands to load
2632 bitmap images; this can be used (for example in a "preboot"
2633 command) to display a splash screen very quickly after poweron.
2635 * Add support for 133 MHz clock on INCA-IP board
2637 * Patch by Lutz Dennig, 10 Apr 2003:
2638 Update for R360MPI board
2640 * Add new meaning to "autostart" environment variable:
2641 If set to "no", a standalone image passed to the
2642 "bootm" command will be copied to the load address
2643 (and eventually uncompressed), but NOT be started.
2644 This can be used to load and uncompress arbitrary
2647 * Patch by Stefan Roese, 10 Apr 2003:
2648 Changed DHCP client to use IP address from server option field #54
2649 from the OFFER packet in the server option field #54 in the REQUEST
2650 packet. This fixes a problem using a Windows 2000 DHCP server,
2651 where the DHCP-server is not the TFTP-server.
2653 * Set max brightness for MN11236 displays on TRAB board
2655 * Add support for TQM862L modules
2657 ======================================================================
2658 Changes for U-Boot 0.3.0:
2659 ======================================================================
2661 * Patch by Arun Dharankar, 4 Apr 2003:
2662 Add IDMA example code (tested on 8260 only)
2664 * Add support for Purple Board (MIPS64 5Kc)
2666 * Add support for MIPS64 5Kc CPUs
2668 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
2670 * Patch by Denis Peter, 04 Apr 2003:
2671 - update MIP405-4 board
2673 * Patch by Stefan Roese, 4 Apr 2003:
2674 - U-Boot version environment variable "ver" added
2675 (CONFIG_VERSION_VARIABLE).
2676 - Changed PPC405GPr version from A to B.
2677 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
2679 * Patches by Denis Peter, 03 April 2003:
2680 - fix PCI IRQs on MPL boards
2681 - fix two more un-relocated pointer problems
2683 * Fix behaviour of "run" command:
2684 - print error message iv variable does not exist
2685 - terminate processing of arguments in case of error
2687 * Patches by Peter Figuli, 10 Mar 2003
2688 - Add support for BTUART on PXA platform
2689 - Add support for WEP EP250 (PXA) board
2691 * Fix flash problems on INCA-IP; add tool to allow bruning images to
2692 flash using a BDI2000
2694 * Implement fix for I2C Edge Conditions problem for all boards that
2695 use the bit-banging driver (common/soft_i2c.c)
2697 * Patch by Martin Winistoerfer, 23 Mar 2003
2698 - Add port to MPC555/556 microcontrollers
2699 - Add support for cmi customer board with
2700 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
2702 * Patch by Rick Bronson, 28 Mar 2003:
2703 - fix common/cmd_nand.c
2705 * Patch by Arun Dharankar, 24 Mar 2003:
2706 - add threads / scheduler example code
2708 * Add patches by Robert Schwebel, 31 Mar 2003:
2709 - add ctrl-c support for kermit download
2710 - align bdinfo output on ARM
2711 - csb226 board: bring in sync with innokom/memsetup.S
2712 - csb226 board: fix MDREFR handling
2713 - misc doc fixes / extensions
2714 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
2715 - add BOOT_PROGRESS to armlinux.c
2717 * Add CPU ID, version, and clock speed for INCA-IP
2719 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
2720 - fix SRAM and SDRAM memory sizing
2721 - add status LED support
2722 - add MAC address for second (SCC1) ethernet port
2724 * Update default environment for TQM8260 board
2726 * Patch by Rick Bronson, 16 Mar 2003:
2727 - Add NAND flash support for reading, writing, and erasing NAND
2728 flash (certain forms of which are called SmartMedia).
2729 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
2731 * Patches by Robert Schwebel, 19 Mar 2003:
2732 - use arm-linux-gcc as default compiler for ARM
2733 - fix i2c fixup code
2734 - fix missing baudrate setting
2735 - added $loadaddr / CFG_LOAD_ADDR support to loadb
2736 - moved "ignoring trailing characters" _before_ u-boot wants to
2737 print out diagnostics messages; removes bogus characters at the
2740 * Patch by John Zhan, 18 Mar 2003:
2741 Add support for SinoVee Microsystems SC8xx boards
2743 * Patch by Rolf Offermanns, 21 Mar 2003:
2744 ported the dnp1110 related changes from the current armboot cvs to
2745 current u-boot cvs. smc91111 does not work. problem marked in
2746 smc91111.c, grep for "FIXME".
2748 * Patch by Brian Auld, 25 Mar 2003:
2749 Add support for STM flash chips on ebony board
2751 * Add PCI support for MPC8250 Boards (PM825 module)
2753 * Patch by Stefan Roese, 25 Mar 2003:
2756 * Patch by Stefan Roese, 20 Mar 2003:
2757 - CPCI4052 update (support for revision 3).
2758 - Set edge conditioning circuitry on PPC405GPr for compatibility
2759 to existing PPC405GP designs.
2760 - Clip udiv to 5 bits on PPC405 (serial.c).
2762 * Extend INCAIP board support:
2763 - add automatic RAM size detection
2764 - add "bdinfo" command
2765 - pass flash address and size to Linux kernel
2766 - switch to 150 MHz clock
2768 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
2769 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
2770 boards, version 153 for Rev. 200 boards).
2772 * Patch by Vladimir Gurevich, 12 Mar 2003:
2773 Fix relocation problem of statically initialized string pointers
2776 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
2777 Cleanup & bug fixes for JFFS2 code:
2778 - the memory mangement was broken. It caused havoc on malloc by
2779 writing beyond the block boundaries.
2780 - the length calculation for files was wrong, sometimes resulting
2781 in short file reads.
2782 - data copying now optionally takes fragment version numbers into
2783 account, to avoid copying from older data.
2784 See doc/README.JFFS2 for details.
2786 * Patch by Josef Wagner, 12 Mar 2003:
2787 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
2788 - ETH05 and BEDBUG support for CU824
2789 - added support for MicroSys CPC45
2790 - new BOOTROM/FLASH0 and DOC base for PM826
2792 * Patch by Robert Schwebel, 12 Mar 2003:
2793 Fix the chpart command on innokom board
2796 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
2797 s/PPCBoot/U-Boot/ in some files
2798 s/pImage/uImage/ in some files
2800 * Patch by Detlev Zundel, 15 Jan 2003:
2801 Fix '' command line quoting
2803 * Patch by The LEOX team, 19 Jan 2003:
2804 - add support for the ELPT860 board
2805 - add support for Dallas ds164x RTC
2807 * Patches by David Müller, 31 Jan 2003:
2808 - minimal setup for CardBus bridges
2809 - add EEPROM read/write support in the CS8900 driver
2810 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
2811 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
2813 * Patch by Steven Scholz, 04 Feb 2003:
2814 add support for RTC DS1307
2816 * Patch by Reinhard Meyer, 5 Feb 2003:
2817 fix PLPRCR/SCCR init sequence on 8xx to allow for
2818 changes of EBDF by software
2820 * Patch by Vladimir Gurevich, 07 Feb 2003:
2821 "API-compatibility patch" for 4xx I2C driver
2823 * TRAB fixes / extensions:
2824 - Restore VFD brightness as saved in environment
2825 - add support for Fujitsu flashes
2826 - make sure both buzzers are turned off (drive low level)
2828 * Patches by Robert Schwebel, 06 Mar 2003:
2829 - fix bug in BOOTP code (must use NetCopyIP)
2830 - update of CSB226 port
2831 - clear BSS segment on XScale
2832 - added support for i2c_init_board() function
2833 - update to the Innokom plattform
2835 * Extend support for redundand environments for configurations where
2836 environment size < sector size
2838 * Patch by Rune Torgersen, 13 Feb 2003:
2839 Add support for Motorola MPC8266ADS board
2841 * Patch by Kyle Harris, 19 Feb 2003:
2842 patches for the Intel lubbock board:
2843 memsetup.S - general cleanup (based on Robert's csb226 code)
2844 flash.c - overhaul, actually works now
2845 lubbock.c - fix init funcs to return proper value
2847 * Patch by Kenneth Johansson, 26 Feb 2003:
2848 - Fixed off by one in RFTA calculation.
2849 - No need to abort when LDF is lower than we can program it's only
2850 minimum timing so clamp it to what we can do.
2851 - Takes function pointer to function for reading the spd_nvram. Usefull
2852 for faking data or hardcode a module without the nvram.
2853 - fix other user for above change
2854 - fix some comments.
2856 * Patches by Brian Waite, 26 Feb 2003:
2857 - fix port for evb64260 board
2858 - fix PCI for evb64260 board
2861 * Patch by Reinhard Meyer, 1 Mar 2003:
2862 Add support for EMK TOP860 Module
2864 * Patch by Yuli Barcohen, 02 Mar 2003:
2865 Add SPD EEPROM support for MPC8260ADS board
2867 * Patch by Robert Schwebel, 21 Jan 2003:
2868 - Add support for Innokom board
2869 - Don't complain if "install" fails
2870 - README cleanup (remove duplicated lines)
2871 - Update PXA header files
2873 * Add documentation for existing POST code (doc/README.POST)
2875 * Patch by Laudney Ren, 15 Jan 2003:
2876 Fix handling of redundand environment in "tools/envcrc.c"
2878 * Patch by Detlev Zundel, 28 Feb 2003:
2879 Add bedbug support for 824x systems
2881 * Add support for 16 MB flash configuration of TRAB board
2883 * Patch by Erwin Rol, 27 Feb 2003:
2884 Add support for RTEMS
2886 * Add image information to README
2888 * Patch by Stefan Roese, 18 Feb 2003:
2889 CPCIISER4 configuration updated.
2891 * Patch by Stefan Roese, 17 Feb 2003:
2892 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
2894 * Patch by Stefan Roese, 13 Feb 2003:
2895 Add "pcidelay" environment variable (in ms, enabled via
2896 CONFIG_PCI_BOOTDELAY).
2897 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
2898 RST# to respond to configuration cycles (33MHz -> 1s).
2900 * Fix dual PCMCIA slot support (when running with just one
2903 * Add VFD type detection to trab board
2905 * extend drivers/cs8900.c driver to synchronize ethaddr environment
2906 variable with value in the EEPROM
2908 * Patch by Stefan Roese, 10 Feb 2003:
2909 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
2911 * Add support for MIPS32 4Kc CPUs
2913 * Add support for INCA-IP Board
2915 ======================================================================
2916 Changes for U-Boot 0.2.2:
2917 ======================================================================
2919 * Add dual ethernet support on PM826
2921 * Add support for LXT971 PHY on PM826
2923 * Patch by Tord Andersson, 16 Jan 2003:
2924 Fix flash sector count for TQM8xxL
2926 * Fix I2C EEPROM problem on ICU862 board (would only write the first
2927 16 bytes out of each 32 byte block)
2929 ======================================================================
2930 Changes for U-Boot 0.2.1:
2931 ======================================================================
2933 * Add support for V37 board
2934 (patch by Jón Benediktsson, 11 Dec 2002)
2936 * Update baudrate in bd_info when it gets changed
2938 * Add watchdog trigger points while waiting for serial port
2939 (so far only 8xx -- needed on LWMON with 100ms watchdog)
2941 * Improve command line tool to access the U-Boot's environment
2942 (figuration of the utility, using a config file)
2944 * Add single quote support for (old) command line parser
2946 * Switch LWMON board default config from FRAM to EEPROM;
2947 in POST, EEPROM shows up on 8 addresses
2949 ======================================================================
2950 Changes for U-Boot 0.2.0:
2951 ======================================================================
2953 * Use 1-byte-read instead of -write for iprobe() function
2954 Add i2c commands to PM826 config
2956 * extend I2C POST code: check for list on known addresses
2958 * Improve log buffer code; use "loglevel" to decide which messages
2959 to log on the console, too (like in Linux); get rid of "logstart"
2961 * Add command line tool to access the U-Boot's environment
2962 (board-specific for TRAB now, to be fixed later)
2964 * Patch by Hans-Joerg Frieden, 06 Dec 2002
2965 Fix misc problems with AmigaOne support
2967 * Patch by Chris Hallinan, 3 Dec 2002:
2968 minor cleanup to the MPC8245 EPIC driver
2970 * Patch by Pierre Aubert , 28 Nov 2002
2971 Add support for external (SIU) interrupts on MPC8xx
2973 * Patch by Pierre Aubert , 28 Nov 2002
2974 Fix nested syscalls bug in standalone applications
2976 * Patch by David Müller, 27 Nov 2002:
2977 fix output of "pciinfo" command for CardBus bridge devices.
2979 * Fix bug in TQM8260 board detection - boards got stuck when board ID
2982 * Add LED indication for IDE activity on KUP4K board
2984 * Fix startup problems with VFD display on TRAB
2986 * Patch by Pierre Aubert, 20 Nov 2002
2987 Add driver for Epson SED13806 graphic controller.
2988 Add support for BMP logos in cfb_console driver.
2990 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
2992 * Patch by Rod Boyce, 21 Nov 2002:
2993 fix PCMCIA on MBX8xx board
2995 * Patch by Pierre Aubert , 21 Nov 2002
2996 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
2997 bootmode word in DPRAM configurable
2999 * Patch by Daniel Engström, 18 Nov 2002:
3000 Fixes for x86 port (mostly strings issues)
3002 * Patch by Ken Chou, 18 Nov 2002:
3003 Fix for natsemi NIC cards (DP83815)
3005 * Patch by Pierre Aubert, 19 Nov 2002:
3006 fix a bug for the MII configuration, and some warnings
3008 * Patch by Thomas Frieden, 13 Nov 2002:
3009 Add code for AmigaOne board
3010 (preliminary merge to U-Boot, still WIP)
3012 * Patch by Jon Diekema, 12 Nov 2002:
3013 - Adding URL for IEEE OUI lookup
3014 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
3016 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
3017 root-on-nfs macros are designed to switch how the default boot
3018 method gets defined.
3020 * Patch by Daniel Engström, 13 Nov 2002:
3021 Add support for i386 architecture and AMD SC520 board
3023 * Patch by Pierre Aubert, 12 Nov 2002:
3024 Add support for DOS filesystem and booting from DOS floppy disk
3026 * Patch by Jim Sandoz, 07 Nov 2002:
3027 Increase number of network RX buffers (PKTBUFSRX in
3028 "include/net.h") for EEPRO100 based boards (especially SP8240)
3029 which showed "Receiver is not ready" errors when U-Boot was
3030 processing the receive buffers slower than the network controller
3033 * Patch by Andreas Oberritter, 09 Nov 2002:
3034 Change behaviour of NetLoop(): return -1 for errors, filesize
3035 otherwise; return code 0 is valid an means no file loaded - in this
3036 case the environment still gets updated!
3038 * Patches by Jon Diekema, 9 Nov 2002:
3039 - improve ADC/DAC clocking on the SACSng board to align
3040 the failing edges of LRCLK and SCLK
3041 - sbc8260 configuration tweaks
3042 - add status LED support for 82xx systems
3043 - wire sspi/sspo commands into command handler; improved error
3045 - add timestamp support and alternate memory test to the
3046 SACSng configuration
3048 * Patch by Vince Husovsky, 7 Nov 2002:
3049 Add "-n" to linker options to get rid of "Not enough room for
3050 program headers" problem
3052 * Patch by David Müller, 05 Nov 2002
3053 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
3054 so we can use an already existing name
3056 * Patch by Pierre Aubert, 05 Nov 2002
3057 Hardware relatied improvments in FDC boot code
3059 * Patch by Holger Schurig, 5 Nov 2002:
3060 Make the PXA really change it's frequency
3062 * Patch by Pierre Aubert, 05 Nov 2002
3063 Add support for slave serial Spartan 2 FPGAs
3065 * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
3068 * Add support for log buffer which can be passed to Linux kernel's
3069 syslog mechanism; used especially for POST results.
3071 * Patch by Klaus Heydeck, 31 Oct 2002:
3072 Add initial support for kup4k board
3074 * Patch by Robert Schwebel, 04 Nov 2002:
3075 - use watchdog to reset PXA250 systems
3076 - added progress callbacks to (some of the) ARM code
3077 - update for Cogent CSB226 board
3079 * Add support for FPS860 board
3081 * Patch by Guillaume Alexandre,, 04 Nov 2002:
3082 Improve PCI access on 32-bits Compact PCI bus
3084 * Fix mdelay() on TRAB - this was still the debugging version with
3085 seconds instead of ms.
3087 * Patch by Robert Schwebel, 1 Nov 2002:
3088 XScale related cleanup (affects all ARM boards)
3090 * Cleanup of names and README.
3092 ======================================================================
3093 Notes for U-Boot 0.1.0:
3094 ======================================================================
3096 This is the initial version of "Das U-Boot", the Universal Boot Loader.
3098 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
3099 For information about the history of the project please see the
3100 PPCBoot project page at http://sourceforge.net/projects/ppcboot
3102 ======================================================================