1 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
2 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3 Date: Thu Dec 27 17:13:11 2007 +0100
5 Remove bit swapping in Xilinx Spartan bitfile loading
7 This patch removes the unnecessary bit swapping when
8 booting .bit files with the 'fpga loadb' command.
10 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12 commit 437fc7327f0611f82937858f2d80e4cd61b40984
13 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14 Date: Thu Dec 27 17:13:05 2007 +0100
16 Fix MSB check in Xilinx Spartan slave serial mode
18 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20 commit 3bff4ffa33729a42645e328a21e8d16488872958
21 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22 Date: Thu Dec 27 17:12:56 2007 +0100
24 Add new Xilinx Spartan FPGA types
26 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
29 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30 Date: Thu Dec 27 17:12:43 2007 +0100
32 Add pre and post configuration callbacks for Spartan FPGAs
34 This patch adds a post configuration callback for Spartan2/3 FPGAs.
35 pre and post configuration callback are now optional and
36 not called when the function pointer is set to NULL.
38 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
41 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42 Date: Thu Dec 27 17:12:34 2007 +0100
44 Improve configuration of FPGA subsystem
46 This patch removes the FPGA subsystem configuration through
47 the CONFIG_FPGA bitmask configuration option.
49 See README for the new options:
55 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
57 commit 95c6bc7d4a3588b452baca610f8c795a83630477
58 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
59 Date: Thu Dec 27 16:55:17 2007 +0100
61 Add Epson RX8025 RTC support
63 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
65 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
66 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
67 Date: Thu Dec 27 16:57:23 2007 +0100
69 serial: Make default_serial_console() a weak function
71 With this patch it is possible to reimplement default_serial_console()
72 in board specific code. This will be done in the upcomming PMC440
73 U-Boot port. This also allows the lwmon board maintainer to
74 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
76 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
78 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
79 Author: Harald Welte <laforge@openmoko.org>
80 Date: Wed Dec 19 14:14:47 2007 +0100
82 add 'terminal program' functionality
84 This patch adds a 'cu' like serial terminal command to u-boot
85 using which you can access other serial ports from the system console.
87 OpenMoko uses this in their Neo1973 phones to get access to the GSM
88 Modem and GPS chip from the bootloader.
90 Signed-off-by: Harald Welte <laforge@openmoko.org>
92 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
93 Author: Harald Welte <laforge@openmoko.org>
94 Date: Wed Dec 19 14:12:53 2007 +0100
96 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
97 that used to exist with the legacy NAND code
99 Signed-off-by: Harald Welte <laforge@openmoko.org>
101 commit f540c42d9564854b19ce9bbb70affe172529fe70
102 Author: Harald Welte <laforge@openmoko.org>
103 Date: Wed Dec 19 14:09:58 2007 +0100
105 Fix building with CRAMFS but not JFFS2 support
107 Signed-off-by: Harald Welte <laforge@openmoko.org>
109 commit 23d0baf967fecdaf1804f045f6339337c5607eec
110 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
111 Date: Sat Dec 22 15:52:58 2007 +0100
113 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
115 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
116 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
118 commit 23776ff292966a85d811126933830bed48211826
119 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
120 Date: Tue Dec 11 10:53:12 2007 +0100
122 ARM: support board-specific ethernet PHY init
124 Add until the new phylib will be arrived
126 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
128 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
129 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
130 Date: Sat Dec 8 16:34:08 2007 +0100
132 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
134 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
136 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
137 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
138 Date: Sun Dec 9 11:01:10 2007 +0100
140 Add missing file in gitignore and comments
142 based on Linux source tree's .gitignore files
144 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
146 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
147 Author: Wolfgang Denk <wd@denx.de>
148 Date: Wed Jan 9 11:36:21 2008 +0100
150 Coding Style cleanup, update CHANGELOG
152 Signed-off-by: Wolfgang Denk <wd@denx.de>
154 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
155 Author: Stefan Roese <sr@denx.de>
156 Date: Wed Jan 9 10:38:58 2008 +0100
158 POST: Execute SPR test after relocation
160 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
161 self modifying code and this doesn't work with stack in d-cache, since
162 I can't move the code from d-cache to i-cache. We move the SPR test to
163 be executed a little later, after relocation. Then stack is located in
164 SDRAM and this self-modifying code is no problem anymore.
166 Signed-off-by: Stefan Roese <sr@denx.de>
168 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
169 Author: Stefan Roese <sr@denx.de>
170 Date: Wed Jan 9 10:28:20 2008 +0100
172 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
174 This patch configures the LWMON5 port to use d-cache as init-ram and
175 the unused GPT0_COMP6 as POST WORD storage.
177 Signed-off-by: Stefan Roese <sr@denx.de>
179 commit 1754f50b710194f886b6f2831803d8960171a14d
180 Author: Stefan Roese <sr@denx.de>
181 Date: Wed Jan 9 10:25:46 2008 +0100
183 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
185 The privious 4xx POST implementation only supported storing the POST
186 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
187 we need to store the POST WORD in some other non volatile location.
188 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
191 Signed-off-by: Stefan Roese <sr@denx.de>
193 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
194 Author: Stefan Roese <sr@denx.de>
195 Date: Wed Jan 9 10:23:16 2008 +0100
197 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
199 This patch adds support for locking the init-ram/stack in d-cache,
200 so that other regions may use d-cache as well
202 Note, that this current implementation locks exactly 4k of d-cache,
203 so please make sure that you don't define a bigger init-ram area. Take
204 a look at the lwmon5 440EPx implementation as a reference.
206 Signed-off-by: Stefan Roese <sr@denx.de>
208 commit 0ddb89601a8d29e808db450366752ffdc6267c53
209 Author: Wolfgang Denk <wd@denx.de>
210 Date: Wed Jan 9 10:16:33 2008 +0100
212 Fix memset bug in ext2fs_read_file()
214 ext2fs_read_file() had the function arguments swapped.
216 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
218 Signed-off-by: Wolfgang Denk <wd@denx.de>
220 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
221 Author: Markus Klotzbücher <mk@denx.de>
222 Date: Tue Jan 5 08:17:15 1988 +0100
224 Fix problems with usb storage devices on MPC5200 /TQM5200
226 The MPC5200 OHCI controller operates in big endian, so
227 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
229 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
231 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
232 Author: Wolfgang Denk <wd@denx.de>
233 Date: Tue Jan 8 22:58:27 2008 +0100
235 Fix compile problem with new env code.
237 Signed-off-by: Wolfgang Denk <wd@denx.de>
239 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
240 Author: Markus Klotzbücher <mk@denx.de>
241 Date: Tue Nov 27 10:23:20 2007 +0100
243 tools: fix fw_printenv tool to compile again
245 This patch updates the fw_printenv/fw_setenv userspace tool to include
246 the correct MTD header in order to compile against current kernel
247 headers. Backward compatibility is preserved by introducing an option
248 MTD_VERSION which can be set to "old" for compilation using the old MTD
249 headers. Along with this a number of warnings are fixed.
251 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
253 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
254 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
255 Date: Tue Jan 8 15:40:09 2008 +0100
257 ppc4xx: assign PCI interrupts on seuqoia boards
259 Some operating systems rely on assigned PCI interrupts.
261 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
263 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
264 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
265 Date: Tue Jan 8 15:50:49 2008 +0100
267 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
269 This patch allows the use of 4xx interrupt vector number defines
270 in board specific code outside cpu/ppc4xx.
272 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
274 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
275 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
276 Date: Tue Jan 8 15:39:01 2008 +0100
278 ppc4xx: Fix UIC2 vector number base
280 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
282 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
283 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
284 Date: Tue Jan 8 12:49:58 2008 +0100
286 ppc4xx: Update PLB/PCI divider for PMC440 board
288 This patch updates the PLB/PCI divider when running at
289 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
291 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
293 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
294 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
295 Date: Tue Jan 8 11:13:09 2008 +0100
297 ppc4xx: Disable error message when no NAND chip is installed on PMC440
299 Add CFG_NAND_QUIET_TEST option to disable error message when
300 no NAND chip is installed on PMC440 boards.
302 Disable a couple of config defines that are only used for NAND_U_BOOT.
304 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
306 commit ad3006fe7e84667021753b74247b0bafd97ba35f
307 Author: Gerald Van Baren <vanbaren@cideas.com>
308 Date: Mon Jan 7 23:47:32 2008 -0500
310 LIBFDT: use memmove() instead of memcpy()
312 This is partial patch from the DTC/libfdt
313 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
314 Author: David Gibson <david@gibson.dropbear.id.au>
315 Date: Wed Nov 21 11:56:14 2007 +1100
317 The patch also fixes one genuine bug caught by valgrind -
318 _packblocks() in fdt_rw.c was using memcpy() where it should have been
321 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
323 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
324 Author: David Gibson <david@gibson.dropbear.id.au>
325 Date: Mon Dec 17 14:42:07 2007 +1100
327 libfdt: Add more documentation (patch the seventh)
329 This patch adds more documenting comments to libfdt.h. Specifically,
330 these document the read/write functions (not including fdt_open_into()
331 and fdt_pack(), for now).
333 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
335 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
336 Author: David Gibson <david@gibson.dropbear.id.au>
337 Date: Mon Dec 17 14:41:52 2007 +1100
339 libfdt: Add more documentation (patch the sixth)
341 This patch adds some more documenting comments to libfdt.h.
342 Specifically this documents all the write-in-place functions.
344 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
346 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
347 Author: Gerald Van Baren <vanbaren@cideas.com>
348 Date: Sat Dec 29 22:45:27 2007 -0500
350 Fine grained per property /chosen updating.
352 Implement a suggestion by Scott Wood to make the /chosen handling fine
353 grained. Don't overwrite pre-existing properties on a per-property basis,
354 so if /chosen exists but a necessary /chosen/property doesn't, it gets
355 created. If a /chosen property exists, it is NOT overwritten unless the
356 "force" flag is true.
358 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
360 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
361 Author: Gerald Van Baren <vanbaren@cideas.com>
362 Date: Sat Jan 5 15:33:29 2008 -0500
364 Improve the FDT help message.
366 Add a note that "fdt copy" makes the new address active.
367 Remove most of the extra hints at the end of the fdt help.
369 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
371 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
372 Author: Gerald Van Baren <vanbaren@cideas.com>
373 Date: Sat Jan 5 14:52:04 2008 -0500
375 Support setting FDT properties with optional values.
377 Fix a bug found and documented by Bartlomiej Sieka where the optional
378 value on "fdt set <path> <prop> [<val>]" wasn't optional.
380 => fdt mknode / testnode
381 => fdt print /testnode
384 => fdt set /testnode testprop
385 => fdt print /testnode
390 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
392 commit 22fb2246df91bfc840d87f0c5910818bad55577a
393 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
394 Date: Fri Dec 28 11:56:30 2007 +0100
396 Add fdt_find_and_setprop() to fdt_support.h
398 fdt_find_and_setprop() is used by several 4xx boards and it's
399 missing in the appropriate header. This patch eliminates a
400 warning when building U-Boot for such boards.
402 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
403 Acked-by: Stefan Roese <sr@denx.de>
405 commit 802b769bac17b0560d3535a42c502469ee190cd1
406 Author: Stefan Roese <sr@denx.de>
407 Date: Tue Jan 8 18:39:30 2008 +0100
409 ppc4xx: Return 0 on success in 4xx ethernet driver
411 Signed-off-by: Stefan Roese <sr@denx.de>
413 commit 6775c68683a53c7abc778774641aac6f833a2cbf
414 Author: Kim Phillips <kim.phillips@freescale.com>
415 Date: Tue Jan 8 09:59:49 2008 -0600
417 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
419 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
421 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
422 Author: Kim Phillips <kim.phillips@freescale.com>
423 Date: Thu Dec 20 16:28:34 2007 -0600
425 mpc83xx: rm remaining FLAT_TREE code
427 ..in board pci.c files
429 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
431 commit b3458d2cd55d01732e30a76d898afd99e871cd67
432 Author: Kim Phillips <kim.phillips@freescale.com>
433 Date: Thu Dec 20 15:57:28 2007 -0600
435 mpc83xx: remove FLAT_TREE code
437 need to rm it from pci code, too!
439 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
441 commit 5b8bc606c61456566af6912f818a153b6b06f242
442 Author: Kim Phillips <kim.phillips@freescale.com>
443 Date: Thu Dec 20 14:09:22 2007 -0600
445 mpc83xx: convert to using do_fixup_*()
447 convert to using simpler mpc85xx style fdt update code; streamline by
448 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
449 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
450 converted over to using libfdt).
452 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
454 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
455 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
456 Date: Thu Dec 20 12:58:51 2007 -0500
458 sbc8349: enable libfdt by default on WRS SBC8349 board.
460 Make libfdt the default for the WRS SBC8349 board.
461 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
462 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
464 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
466 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
467 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
468 Date: Thu Dec 20 12:58:16 2007 -0500
470 sbc8349: migrate board to libfdt
472 This adds libfdt support code for the Wind River sbc8349 board.
474 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
475 the other Freescale 83xx boards.
477 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
479 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
480 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
481 Date: Thu Dec 20 12:56:19 2007 -0500
483 sbc8349: Remove board specific ECC code
485 ECC code is now shared for all 83xx boards, so remove board specific one.
486 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
488 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
490 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
491 Author: Kim Phillips <kim.phillips@freescale.com>
492 Date: Thu Dec 20 01:30:48 2007 -0600
494 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
496 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
498 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
500 commit ccf21c311e68d48399eff1e72936052885f6e3f7
501 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
502 Date: Thu Dec 6 16:43:40 2007 +0100
504 Add support CONFIG_UEC_ETH3 in MPC83xx
506 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
508 commit e6af9932d31171e35db880e7b2f29f903b1b7660
509 Author: Kumar Gala <galak@kernel.crashing.org>
510 Date: Mon Nov 26 11:00:54 2007 -0600
512 Remove CONFIG options related to OF that we dont use
514 The MPC8360E MDS config defined:
516 CONFIG_OF_HAS_UBOOT_ENV
518 Which we don't use or ever needed. This seems like copy-paste feature creep.
520 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
522 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
523 Author: Kim Phillips <kim.phillips@freescale.com>
524 Date: Mon Dec 10 14:16:22 2007 -0600
526 mpc83xx: supress compiler warning
528 mpc8360emds.c: In function ‘ft_board_setup’:
529 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
530 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
532 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
534 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
535 Author: Kim Phillips <kim.phillips@freescale.com>
536 Date: Tue Nov 27 14:17:29 2007 -0600
538 mpc83xx: fix remaining fdt_find_node_by_path references
540 rename to fdt_path_offset
542 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
544 commit 921d4b19ad1be704df58725485d9292dc0414adf
545 Author: Kim Phillips <kim.phillips@freescale.com>
546 Date: Mon Nov 19 12:30:09 2007 -0600
548 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
550 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
551 This change guarantees that the environment will be located on the
552 first flash sector after the U-Boot image.
554 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
556 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
557 Author: Kim Phillips <kim.phillips@freescale.com>
558 Date: Fri Nov 9 14:28:08 2007 -0600
560 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
562 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
563 properties in the device tree so the PHY gets configured for internal delay on
564 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
566 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
568 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
569 Author: Dave Liu <r63238@freescale.com>
570 Date: Tue Sep 18 12:41:15 2007 +0800
572 mpc83xx: update the CREDITS and MAINTAINERS
574 update the CREDITS and MAINTAINERS.
576 Signed-off-by: Dave Liu <daveliu@freescale.com>
578 commit b21add4b42af7b767448251b599b91066a160e0d
579 Author: Dave Liu <r63238@freescale.com>
580 Date: Tue Sep 18 12:40:21 2007 +0800
582 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
584 Add the MAINTAINER and MAKEALL entries for mpc837xemds
586 Signed-off-by: Dave Liu <daveliu@freescale.com>
588 commit f8900ce9094c462355eb792eea264ff16ac8fd16
589 Author: Dave Liu <r63238@freescale.com>
590 Date: Tue Sep 18 12:38:53 2007 +0800
592 mpc83xx: Add the MPC837xEMDS board readme
594 Add the README.mpc837xemds to /doc
596 Signed-off-by: Dave Liu <daveliu@freescale.com>
598 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
599 Author: Dave Liu <r63238@freescale.com>
600 Date: Tue Sep 18 12:37:57 2007 +0800
602 mpc83xx: Add the support of MPC837xEMDS board
604 The MPC837xEMDS board support:
605 * DDR2 400MHz hardcoded and SPD init
606 * Local bus NOR Flash
607 * I2C, UART, MII and RTC
611 Signed-off-by: Dave Liu <daveliu@freescale.com>
613 commit 555da61702771fe0f76f3de23b4e7590f3704161
614 Author: Dave Liu <r63238@freescale.com>
615 Date: Tue Sep 18 12:36:58 2007 +0800
617 mpc83xx: Add the support of MPC8315E SoC
619 The MPC8315E SoC including e300c3 core and new IP blocks,
620 such as TDM, PCI Express and SATA controller.
622 Signed-off-by: Dave Liu <daveliu@freescale.com>
624 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
625 Author: Dave Liu <r63238@freescale.com>
626 Date: Tue Sep 18 12:36:11 2007 +0800
628 mpc83xx: Add the support of MPC837x SoC
630 The MPC837x SoC including e300c4 core and new IP blocks,
631 such as SDHC, PCI Express and SATA controller.
633 Signed-off-by: Dave Liu <daveliu@freescale.com>
635 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
636 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
637 Date: Wed Nov 14 18:54:53 2007 +0300
639 MPC8360E-MDS: configure and enable second UART
641 Despite user manual, BCSR9.7 is negated (high) on HRST, so
642 UART2 is disabled. Fix that and configure QE pins properly.
644 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
646 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
647 Author: Timur Tabi <timur@freescale.com>
648 Date: Mon Nov 5 09:34:06 2007 -0600
650 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
652 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
653 currently-defined 83xx boards. This change guarantees that the environment
654 will be located on the first flash sector after the U-Boot image.
656 Signed-off-by: Timur Tabi <timur@freescale.com>
657 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
659 commit e05329516a13616b53240cd85b739217c2bf87f1
660 Author: Larry Johnson <lrj@acm.org>
661 Date: Fri Jan 4 13:27:02 2008 -0500
663 ppc4xx: Remove weak binding from common Denali data-eye search code
665 Now that there are no board-specific versions of
666 "denali_core_search_data_eye()", the weak binding on the common version
669 Signed-off-by: Larry Johnson <lrj@acm.org>
671 commit 5ba576c01602fd328800a427964c36a0a05c5dce
672 Author: Stefan Roese <sr@denx.de>
673 Date: Sat Jan 5 09:13:46 2008 +0100
675 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
677 Signed-off-by: Stefan Roese <sr@denx.de>
679 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
680 Author: Stefan Roese <sr@denx.de>
681 Date: Sat Jan 5 09:12:41 2008 +0100
683 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
685 On Katmai the complete auto-calibration somehow doesn't seem to
686 produce the best results, meaning optimal values for RQFD/RFFD.
687 This was discovered by GDA using a high bandwidth scope,
688 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
689 so now on Katmai "only" RFFD is auto-calibrated.
691 This patch also adds RDCC calibration as mentioned on page 7 of
692 the AMCC PowerPC440SP/SPe DDR2 application note:
693 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
695 Signed-off-by: Stefan Roese <sr@denx.de>
697 commit 49db47b8ae6afff2b898be312948ff501357dc80
698 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
699 Date: Wed Jan 2 16:48:42 2008 +0100
701 ppc4xx: Remove sdram.h from PMC440 board
703 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
705 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
706 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
707 Date: Wed Jan 2 16:48:34 2008 +0100
709 ppc4xx: use common denali core defines and data eye search code for PMC440
711 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
713 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
714 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
715 Date: Wed Jan 2 12:05:14 2008 +0100
717 ppc4xx: More cleanup for esd's LCD code
719 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
721 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
722 Author: Stefan Roese <sr@denx.de>
723 Date: Fri Jan 4 12:00:01 2008 +0100
725 ppc4xx: Fix Sequoia NAND booting target
727 The Sequoia NAND booting target now uses the recently extracted
728 cpu/ppc4xx/denali_data_eye.c file too.
730 Signed-off-by: Stefan Roese <sr@denx.de>
732 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
733 Author: Lawrence R. Johnson <lrj@acm.org>
734 Date: Thu Jan 3 15:02:02 2008 -0500
736 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
738 Signed-off-by: Larry Johnson <lrj@acm.org>
740 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
741 Author: Lawrence R. Johnson <lrj@acm.org>
742 Date: Fri Jan 4 02:11:56 2008 -0500
744 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
746 Note: this patch changes the configuration of some GPIO registers:
748 Register Old Value New Value
749 --------------- ---------- ----------
750 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
751 DCR GPIO0_TSRH 0x55005000 0x00000000
752 DCR GPIO1_TCR 0xC2000000 0xE2000000
753 DCR GPIO1_TSRL 0x0C000000 0x00200000
754 DCR GPIO1_ISR2L 0x00050000 0x00110000
756 Signed-off-by: Larry Johnson <lrj@acm.org>
758 commit 5ab884b254ca2e707ab50545cd705f30108cf491
759 Author: Lawrence R. Johnson <lrj@acm.org>
760 Date: Thu Jan 3 18:54:00 2008 -0500
762 ppc4xx: Add functionality to GPIO support
764 This patch makes two additions to GPIO support:
766 First, it adds function gpio_read_in_bit() to read the a bit from the
767 GPIO Input Register (GPIOx_IR) in the same way that function
768 gpio_read_out_bit() reads a bit from the GPIO Output Register
771 Second, it modifies function gpio_set_chip_configuration() to provide
772 an additional option for configuring the GPIO from the
773 "CFG_4xx_GPIO_TABLE".
775 According to the 440EPx User's Manual, when an alternate output is used,
776 the three-state control is configured in one of two ways, depending on
777 the particular output. The first option is to select the corresponding
778 alternate three-state control in the GPIOx_TRSH/L registers. The second
779 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
780 the GPIOx_TRSH/L registers, and set the corresponding bit in the
781 GPIOx_TCR register to enable the output. For example, the Manual
782 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
783 the alternate three-state control (first option), and specifies
784 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
785 enabled in the GPIOx_TCR register (second option).
787 Currently, gpio_set_chip_configuration() configures all alternate signal
788 outputs to use the first option. This patch allow the second option to
789 be selected by setting the "out_val" element in the table entry to
790 "GPIO_OUT_1". The first option is used when the "out_val" element is
791 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
792 alternate signal is selected, and because all current GPIO tables set
793 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
794 not change any existing configurations.
796 Signed-off-by: Larry Johnson <lrj@acm.org>
798 commit 196404cdc1de495d6182e84731c200fc5748df15
799 Author: Larry Johnson <lrj@arlinx.com>
800 Date: Sun Dec 30 01:01:54 2007 -0500
802 PPC4xx: Remove sdram.h from board/lwmon5
804 These definitions are now in "include/ppc440.h".
806 Signed-off-by: Larry Johnson <lrj@acm.org>
808 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
809 Author: Larry Johnson <lrj@arlinx.com>
810 Date: Sun Dec 30 01:01:32 2007 -0500
812 PPC4xx: Use common code for LWMON5 board SDRAM support
814 This patch also modifies the functionality of the code so that the data-eye
815 search is now done with with the cache disabled.
817 Signed-off-by: Larry Johnson <lrj@acm.org>
819 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
820 Author: Larry Johnson <lrj@arlinx.com>
821 Date: Sun Dec 30 01:01:14 2007 -0500
823 PPC4xx: Remove sdram.h from board/amcc/sequoia
825 These definitions are now in "include/ppc440.h".
827 Signed-off-by: Larry Johnson <lrj@acm.org>
829 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
830 Author: Larry Johnson <lrj@arlinx.com>
831 Date: Sun Dec 30 01:00:50 2007 -0500
833 PPC4xx: Use common code for Sequoia board SDRAM support
835 Signed-off-by: Larry Johnson <lrj@acm.org>
837 commit 8b0c5c127690335758100c25eaec2b84db97c101
838 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
839 Date: Thu Dec 27 16:58:41 2007 +0100
841 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
843 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
844 networking stack does not automatically switch to
845 another interface. This patch does not touch the default
848 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
849 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
851 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
852 Author: Upakul Barkakaty <upakul@gmail.com>
853 Date: Thu Nov 29 12:16:13 2007 +0530
855 NET: Proper return code handling in eth_init() function in file eth.c
857 This patch modifies the return code handling in the eth_init()
858 function, to be compatible with the handling of the return codes in
859 the other network stack files. It now returns a 0 on Success and -1 on
862 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
863 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
865 commit 5ca2d0953e4579a80810966cca2077e20d912c97
866 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
867 Date: Mon Nov 19 20:27:04 2007 +0900
869 net/eth.c: Fix env_enetaddr signed overflow
871 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
874 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
882 Warning: NEC-Candy MAC addresses don't match:
883 Address in SROM is 00:00:4C:80:92:A2
884 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
886 This patch changes env_enetaddr type from `char' to `unsigned char'.
888 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
889 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
890 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
892 commit f85b60710571b37293d2233933b76e2aa3db5635
893 Author: Rafal Jaworowski <raj@semihalf.com>
894 Date: Thu Dec 27 18:19:02 2007 +0100
896 Introduce new eth_receive routine
898 The purpose of this routine is receiving a single network frame, outside of
899 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
900 U-Boot will let them utilise networking facilities. For sending a raw frame
901 the already existing eth_send() can be used.
903 The direct consumer of this routine is the newly introduced API layer for
904 external applications (enabled with CONFIG_API).
906 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
907 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
908 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
910 commit 5c740711f0ea5b51414b341b71597c4a0751be74
911 Author: Jon Loeliger <jdl@freescale.com>
912 Date: Thu Jan 3 10:41:04 2008 -0600
914 8610: Move include of config.h earlier.
916 Include config.h earlier in the set of #includes
917 so as to avoid a incidental and duplicate definition
918 of CFG_CACHELINE_SIZE.
920 Signed-off-by: Jon Loeliger
922 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
923 Author: Jon Loeliger <jdl@freescale.com>
924 Date: Tue Dec 4 10:53:34 2007 -0600
926 Don't slam #undef DEBUG in the 8641HPCN config file.
928 Doing so prevents it from being individually set
929 and useful in other files.
931 Signed-off-by: Jon Loeliger <jdl@freescale.com>
933 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
934 Author: Jon Loeliger <jdl@freescale.com>
935 Date: Wed Nov 28 14:47:18 2007 -0600
937 Convert MPC8641HPCN to use libfdt.
939 Assumes the presence of the aliases node in the DTS to
940 locate the ethernet, pci and serial nodes for fixups.
942 Use consistent fdtaddr and fdtfile in environment variables.
944 Signed-off-by: Jon Loeliger <jdl@freescale.com>
946 commit ce37422d0002e10490e268392e0c4e3028e52cec
947 Author: Stefan Roese <sr@denx.de>
948 Date: Wed Jan 2 14:06:26 2008 +0100
950 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
952 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
953 flash chips connected to a 32bit wide port.
955 Signed-off-by: Stefan Roese <sr@denx.de>
957 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
958 Author: Wolfgang Denk <wd@denx.de>
959 Date: Wed Jan 2 15:58:44 2008 +0100
961 Fix compile problem introduced by "cleanup" commit 3dfd708c
963 Signed-off-by: Wolfgang Denk <wd@denx.de>
965 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
966 Author: Wolfgang Denk <wd@denx.de>
967 Date: Wed Jan 2 15:54:45 2008 +0100
969 Make scripts and Makefiles POSIX compliant
971 The bash builtin versions of the "test" (resp. "[") command allow
972 using "==" for string comparisons, but POSIX compatible implemen-
973 tations (like /usr/bin/test) insist on using "=" only. On such systems
976 $ /usr/bin/test a == a && echo OK
977 /usr/bin/test: ==: binary operator expected
979 This patch fixes Makefiles and scripts to use POSIX style.
981 Signed-off-by: Wolfgang Denk <wd@denx.de>
983 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
984 Author: Wolfgang Denk <wd@denx.de>
985 Date: Wed Jan 2 12:38:43 2008 +0100
987 Minor coding style cleanup.
989 Signed-off-by: Wolfgang Denk <wd@denx.de>
991 commit e174ac34adf5d5653df12bc3cf19c52063a71269
992 Author: Stefan Roese <sr@denx.de>
993 Date: Fri Dec 28 17:29:56 2007 +0100
995 ppc4xx: Coding style cleanup
997 Signed-off-by: Stefan Roese <sr@denx.de>
999 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
1000 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1001 Date: Fri Dec 28 17:07:24 2007 +0100
1003 ppc4xx: Complete PMC440 board support
1005 This patch brings the PMC440 board configuration file.
1006 Finally it enables the PMC440 board support.
1008 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1010 commit 407843a582560fc5231299561ab3c2b6b6cd3397
1011 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1012 Date: Fri Dec 28 17:07:18 2007 +0100
1014 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
1016 This patch adds some BSP commands and FPGA booting support
1017 for esd's PMC440 boards.
1019 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1021 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
1022 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1023 Date: Fri Dec 28 17:07:14 2007 +0100
1025 ppc4xx: Add initial esd PMC440 board files
1027 This patch adds the first files for the new esd PMC440 boards.
1028 The next two patches will complete the PMC440 board support.
1030 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1032 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
1033 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1034 Date: Fri Dec 28 17:10:36 2007 +0100
1036 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
1038 - add EEPROM write protection for esd PLU405 boards.
1039 - initialize NAND GPIOs
1040 - use correct io accessors
1043 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1045 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
1046 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1047 Date: Fri Dec 28 17:10:44 2007 +0100
1049 ppc4xx: use correct io accessors for esd's LCD code
1051 This patch fixes esd's LCD dectection code to work correctly with
1054 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1056 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
1057 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1058 Date: Fri Dec 28 17:10:42 2007 +0100
1060 ppc4xx: Maintenance patch for VOH405 boards
1062 - add EEPROM write protection
1063 - initialize NAND GPIOs
1064 - use correct io accessors
1065 - slow down I2C clock to 100kHz
1066 - enable ext. I2C bus
1069 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1071 commit c05569066dbcba3fdf36d4d1943df265dc316a86
1072 Author: Stefan Roese <sr@denx.de>
1073 Date: Fri Dec 28 16:08:08 2007 +0100
1075 ppc4xx: Enable 405EP PCI arbiter per default on all boards
1077 In an attmemt to clean up the 4xx start.S file, I removed the enabling
1078 of the internal 405EP PCI arbiter. This is needed for multiple other
1079 405EP platforms, like most of the esd 405EP. Now the internal PCI
1080 arbiter is enabled again per default as it has been before.
1082 Signed-off-by: Stefan Roese <sr@denx.de>
1083 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1085 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
1086 Author: Stefan Roese <sr@denx.de>
1087 Date: Fri Dec 28 15:53:46 2007 +0100
1089 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
1091 Signed-off-by: Stefan Roese <sr@denx.de>
1092 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1094 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
1095 Author: Stefan Roese <sr@denx.de>
1096 Date: Fri Dec 28 06:06:04 2007 +0100
1098 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
1100 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
1101 platforms mentioned above.
1103 Signed-off-by: Stefan Roese <sr@denx.de>
1105 commit b568fd25574181a3b12ae3d66b2913903442cb83
1106 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1107 Date: Thu Dec 27 17:03:46 2007 +0100
1109 Remove CPCI440 board
1111 This board never left prototyping state and it
1112 became a millstone round my neck. So remove it.
1114 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1116 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
1117 Author: Larry Johnson <lrj@arlinx.com>
1118 Date: Thu Dec 27 11:28:51 2007 -0500
1120 Add support for Korat PPC440EPx board
1122 These patches add support for the PPC440EPx-based "Korat" board to
1123 U-Boot. They are based primarily on support for the Sequoia board.
1125 Signed-off-by: Larry Johnson <lrj@acm.org>
1127 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
1128 Author: Larry Johnson <lrj@arlinx.com>
1129 Date: Sat Dec 22 15:16:25 2007 -0500
1131 Add configuration file for Korat board
1133 This patch supplies the configuration file for the Korat PPC440EPx-
1136 Signed-off-by: Larry Johnson <lrj@acm.org>
1138 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
1139 Author: Larry Johnson <lrj@arlinx.com>
1140 Date: Sat Dec 22 15:16:11 2007 -0500
1142 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
1144 Signed-off-by: Larry Johnson <lrj@acm.org>
1146 commit aba19604d848b2838cfb9ebe818909e6a216058e
1147 Author: Larry Johnson <lrj@arlinx.com>
1148 Date: Thu Dec 27 10:54:48 2007 -0500
1150 Add 440EPx DDR2 SPD DIMM support
1152 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
1153 controller. It should also work on the 440GRx. It is based on the DDR2
1154 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
1156 This code has been tested on prototype Korat boards with three Kingston
1157 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
1158 (two ranks). The Korat board has a single DIMM socket, but support has
1159 been provided (though not tested) for boards with two DIMM sockets.
1161 Signed-off-by: Larry Johnson <lrj@acm.org>
1163 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
1164 Author: Larry Johnson <lrj@arlinx.com>
1165 Date: Sat Dec 22 15:15:30 2007 -0500
1167 Copy 440EPx/GRx SDRAM data-eye search to common directory
1169 This patch creates a non-board-specific file for performing the SDRAM
1170 data-eye search. It also adds ECC error checking to the test of valid
1171 data on readback when ECC is enabled.
1173 Signed-off-by: Larry Johnson <lrj@acm.org>
1175 commit c46f53333b22b1f9098676bea8884fc7db820cf3
1176 Author: Larry Johnson <lrj@arlinx.com>
1177 Date: Sat Dec 22 15:15:13 2007 -0500
1179 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
1181 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
1182 It also fixes two typos in the definitions, so the board-specific
1183 "sdram.h" files containing these definitions are also fixed to avoid
1186 Signed-off-by: Larry Johnson <lrj@acm.org>
1188 commit c348578bf612d0c56d8d376d23cae16defbd86af
1189 Author: Larry Johnson <lrj@arlinx.com>
1190 Date: Thu Dec 27 10:50:55 2007 -0500
1192 Add Ethernet 1000BASE-X support for PPC4xx
1194 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
1195 is defined, the PHY will advertise it's capabilities for autonegotiation
1196 based on the capabilities shown in the PHY's status registers, including
1197 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
1198 advertise hard-coded capabilities, as before.
1200 Signed-off-by: Larry Johnson <lrj@acm.org>
1202 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
1203 Author: Larry Johnson <lrj@arlinx.com>
1204 Date: Thu Dec 27 09:52:17 2007 -0500
1206 Add driver for National Semiconductor LM73 temperature sensor
1208 This driver is based on the driver for the LM75.
1210 Signed-off-by: Larry Johnson <lrj@acm.org>
1212 commit 12618278688ea9b3d76536960a5ad2e3790fac40
1213 Author: Larry Johnson <lrj@arlinx.com>
1214 Date: Sat Dec 22 15:14:00 2007 -0500
1216 Add driver for STMicroelectronics M41T60 RTC
1218 This driver is based on the driver for the M41T11. In the intended
1219 application, the RTC will be powered by a large capacitor, rather than a
1220 battery. The driver therefore checks to see whether the RTC has lost
1221 power. The chip's OUT bit is normally reset from its power-up state. If
1222 the OUT bit is read as set, or if the date and time are not valid, then the
1223 RTC is assumed to have lost power, and its date and time are reset to
1224 1900-01-01 00:00:00.
1226 Support for adjusting the speed of the clock to improve accuracy is
1227 provided through an environment variable.
1229 Signed-off-by: Larry Johnson <lrj@acm.org>
1231 commit d3471173e14b7544bb60339eda8d3d3906694b0a
1232 Author: Larry Johnson <lrj@arlinx.com>
1233 Date: Sat Dec 22 15:34:39 2007 -0500
1235 Use out_be32() and friends to access memory-mapped registers in sequoia.c
1237 Signed-off-by: Larry Johnson <lrj@acm.org>
1239 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
1240 Author: Larry Johnson <lrj@arlinx.com>
1241 Date: Sat Dec 22 15:34:20 2007 -0500
1243 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
1245 Signed-off-by: Larry Johnson <lrj@acm.org>
1247 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
1248 Author: Larry Johnson <lrj@arlinx.com>
1249 Date: Sat Dec 22 15:23:50 2007 -0500
1251 Cosmetic changes to ECC POST for AMCC Denali core
1253 Signed-off-by: Larry Johnson <lrj@acm.org>
1255 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
1256 Author: Stefan Roese <sr@denx.de>
1257 Date: Wed Dec 26 20:20:19 2007 +0100
1259 ppc4xx: Fix compilation problem in 405 cache POST test
1261 Signed-off-by: Stefan Roese <sr@denx.de>
1263 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
1264 Author: Stefan Roese <sr@denx.de>
1265 Date: Sat Dec 22 12:20:09 2007 +0100
1267 ppc4xx: Move virtual address of POST cache test to bigger address
1269 On Sequoia & LWMON5 the virtual address of the POST cache test is now
1270 moved to a bigger address. This enables usage of more memory on those
1273 Signed-off-by: Stefan Roese <sr@denx.de>
1275 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
1276 Author: Stefan Roese <sr@denx.de>
1277 Date: Sat Dec 22 12:18:26 2007 +0100
1279 ppc4xx: Fix problem in 44x cache POST routine
1281 As repoted by Larry Johnson, running "diag run cache" caused a crash
1282 in U-Boot. This problem was introduced by a patch that removed the
1283 TLB entry for the cache test after the test has completed. Since this
1284 TLB was only setup once, a 2nd attempt to run this cache test
1285 failed with a crash. Now this TLB entry is created every time the
1288 Signed-off-by: Stefan Roese <sr@denx.de>
1290 commit b0265b576bb8fa9465f99e99c323768b562fadc2
1291 Author: Stefan Roese <sr@denx.de>
1292 Date: Fri Dec 21 07:51:29 2007 +0100
1294 ppc4xx: Update Makalu fdt support
1296 Signed-off-by: Stefan Roese <sr@denx.de>
1298 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
1299 Author: Stefan Roese <sr@denx.de>
1300 Date: Wed Dec 19 09:05:40 2007 +0100
1302 ppc4xx: Add fdt support to AMCC Katmai eval board
1304 Signed-off-by: Stefan Roese <sr@denx.de>
1306 commit 328a340392a5df9aaf00792be989df73e750859e
1307 Author: Stefan Roese <sr@denx.de>
1308 Date: Tue Dec 18 08:44:51 2007 +0100
1310 ppc4xx: fdt: Cleanup setup of cpu node setup
1312 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
1313 without using the absolute path to the cpu node. This makes it possible
1314 to use this U-Boot version with both versions of cpu-node naming
1315 "cpu@0" and the former "PowerPC,440EPx@0".
1317 Signed-off-by: Stefan Roese <sr@denx.de>
1319 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
1320 Author: Stefan Roese <sr@denx.de>
1321 Date: Mon Dec 17 17:26:21 2007 +0100
1323 ppc4xx: Fix lwmon5 compilation problem
1325 Now that the 440EPx ECC test is not board specific anymore
1326 remove this Makefile.
1328 Signed-off-by: Stefan Roese <sr@denx.de>
1330 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
1331 Author: Anatolij Gustschin <agustschin@t-online.de>
1332 Date: Wed Dec 5 17:43:20 2007 +0100
1334 Fix ppc4xx clear_bss() code
1336 ppc4xx clear_bss() fails if BSS segment size is not
1337 divisible by 4 without remainder. This patch provides
1338 fix for this problem.
1340 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1342 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
1343 Author: Niklaus Giger <niklausgiger@gmx.ch>
1344 Date: Fri Nov 30 18:35:11 2007 +0100
1346 PPC4xx: Minimal changes to add vxWorks support
1348 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1350 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
1351 Author: Markus Klotzbücher <mk@denx.de>
1352 Date: Fri Nov 23 13:09:18 2007 +0100
1354 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
1356 When using dhcp/bootp the "netmask" environment variable is not
1357 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
1358 desireable, so the following patch adds this this option to the board
1361 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
1362 Signed-off-by: Stefan Roese <sr@denx.de>
1364 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
1365 Author: Larry Johnson <lrj@arlinx.com>
1366 Date: Sat Oct 27 12:48:15 2007 -0400
1368 Fix/enhance ECC POST for 440EPx/GRx
1370 This patch allows the ECC POST to be used for different boards with the
1371 PPC440 Denali SDRAM controller. Modifications include skipping the test
1372 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
1373 to prevent timing errors.
1375 Signed-off-by: Larry Johnson <lrj@acm.org>
1377 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
1378 Author: Larry Johnson <lrj@arlinx.com>
1379 Date: Sat Oct 27 12:48:05 2007 -0400
1381 PPC4xx: Move/rename ECC POST for 440EPx/GRx
1383 Signed-off-by: Larry Johnson <lrj@acm.org>
1385 commit c29d2d3680046d430022c55e50fcb27f5866517e
1386 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1387 Date: Fri Dec 14 11:20:33 2007 +0100
1389 ppc4xx: use correct io accessors for 4xx ethernet POST
1391 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1393 commit ba79fde58a48c0a6ff8e2a96caba951594142203
1394 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1395 Date: Fri Dec 14 11:19:56 2007 +0100
1397 ppc4xx: fix flush + invalidate_dcache_range arguments
1399 flush + invalidate_dcache_range() expect the start and stop+1 address.
1400 So the stop address is the first address behind (!) the range.
1402 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1404 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
1405 Author: Stefan Roese <sr@denx.de>
1406 Date: Fri Dec 14 08:41:29 2007 +0100
1408 ppc4xx: fdt: use fdt_fixup_ethernet()
1410 By using aliases in the dts file, the ethernet node fixup is
1411 much easier with the recently added functions.
1413 Please note that the dts file needs the aliases for this to work.
1415 Signed-off-by: Stefan Roese <sr@denx.de>
1417 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
1418 Author: Stefan Roese <sr@denx.de>
1419 Date: Thu Dec 13 14:52:53 2007 +0100
1421 ppc4xx: Bring 4xx fdt support up-to-date
1423 This patch update the 4xx fdt support. It enabled fdt booting
1424 on the AMCC Kilauea and Sequoia for now. More can follow later
1427 Signed-off-by: Stefan Roese <sr@denx.de>
1429 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
1430 Author: Stefan Roese <sr@denx.de>
1431 Date: Thu Dec 27 07:50:54 2007 +0100
1433 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
1435 The check for an sufficiently erased destination was missing in the
1436 buffered write function of the cfi flash driver (when
1437 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
1438 writing to such a region will fail with the currect error message.
1440 Signed-off-by: Stefan Roese <sr@denx.de>
1442 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
1443 Author: Martin Krause <martin.krause@tqs.de>
1444 Date: Mon Nov 12 10:56:17 2007 +0100
1446 Some configuration updates for the TQM5200 based TB5200 board:
1448 - enable command line history
1449 - increase malloc space (because of bigger flash sectors)
1451 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1453 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
1454 Author: Martin Krause <martin.krause@tqs.de>
1455 Date: Thu Sep 27 11:10:08 2007 +0200
1457 TQM8xx: use the CFI flash driver on all TQM8xx boards
1459 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1461 commit 11d9eec479b470eab9242ab937fca70a876d9376
1462 Author: Martin Krause <martin.krause@tqs.de>
1463 Date: Wed Sep 26 17:55:56 2007 +0200
1465 TQM885D: adjust for doubled flash sector size + some minor fixes
1467 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1469 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
1470 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
1471 Date: Wed Sep 26 17:55:54 2007 +0200
1473 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
1475 CAS-Latency=2, Write Recovery Time tWR=2
1476 The max. supported bus frequency is 66 MHz. Therefore, changed
1477 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
1479 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1481 commit b988b8cd443989be65161888eea0127ad03f846f
1482 Author: Martin Krause <martin.krause@tqs.de>
1483 Date: Wed Sep 26 17:55:56 2007 +0200
1485 TQM885D: use calculated cpuclk instead of measuring it
1487 On the TQM885D the measurement of cpuclk with the PIT reference
1488 timer ist not necessary. Since all module variants use the same
1489 external 10 MHz oscillator, the cpuclk only depends on the PLL
1490 configuration - which is readable by software.
1492 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1494 commit 492c7049869348d31168de8dad89651315e468e0
1495 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
1496 Date: Thu Sep 27 14:54:46 2007 +0200
1498 TQM885D: fix SDRAM refresh
1500 At 133 MHz the current SDRAM refresh rate is too fast
1501 (measured 4 * 1.17 us).
1502 CFG_MAMR_PTA changes from 39 to 128. This result
1503 in a refresh rate of 4 * 7.8 us at the default clock
1504 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
1505 This is a compromise until a new method is found to
1506 adjust the refresh rate.
1508 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1510 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
1511 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
1512 Date: Thu Sep 27 14:54:46 2007 +0200
1514 TQM860M: Support for 10col SDRAMs, max. 128 MiB
1516 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1518 commit 61fb15c516fef5631e305f1976d7b3a679725856
1519 Author: Wolfgang Denk <wd@denx.de>
1520 Date: Thu Dec 27 01:52:50 2007 +0100
1522 Fix coding style issues; update CHANGELOG.
1524 Signed-off-by: Wolfgang Denk <wd@denx.de>
1526 commit 467bcee11fe26ad422f2de971aa70866079870f2
1527 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1528 Date: Fri Dec 14 15:36:18 2007 +0100
1530 cfi_flash: Add manufacturer-specific fixups
1532 Run fixups based on the JEDEC manufacturer ID independent of the
1535 This changes current behaviour: Previously, geometry reversal for AMD
1536 chips were done based on the command set ID, while they are now done
1537 based on the JEDEC manufacturer and device ID.
1539 Also add fixup for top-boot Atmel chips. A fixup is needed for
1540 AT49BV6416(T) too, but since u-boot currently only reads the low byte
1541 of the device ID, there's no way to tell it apart from AT49BV642D,
1542 which should not have this fixup. Since AT49BV642D support is
1543 necessary to get ATNGW100 board support into mainline, I've commented
1544 out the fixup for now.
1546 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1548 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
1549 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1550 Date: Fri Dec 14 15:36:17 2007 +0100
1552 cfi_flash: Add cmdset-specific init functions
1554 Move things like reading JEDEC IDs and fixing up geometry reversal
1555 into separate functions. The geometry reversal fixup is now performed
1556 by altering the qry structure directly, which makes the sector init
1557 code slightly cleaner.
1559 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1561 commit e23741f4a6d8047520ef0d4971762749b3587d32
1562 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1563 Date: Fri Dec 14 15:36:16 2007 +0100
1565 cfi_flash: Read whole QRY structure in one go
1567 Read out the whole CFI Standard Query structure after successful cfi
1568 identification. This allows subsequent code to access this information
1569 directly without having to go through flash_read_uchar() and friends.
1571 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1573 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
1574 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1575 Date: Mon Dec 17 11:02:44 2007 +0100
1577 AVR32: Fix logic inversion in disable_interrupts()
1579 disable_interrupts() should return nonzero if interrupts were
1580 _enabled_ before, not disabled.
1582 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1584 commit acac475212cbedb17b321a363a1c878e2b47b37f
1585 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1586 Date: Fri Dec 14 16:51:22 2007 +0100
1588 AVR32: Enable interrupts at bootup
1590 The timer code depends on the timer interrupt to keep track of the
1591 upper 32 bits of the cycle counter. This obviously doesn't work when
1592 interrupts are disabled the whole time.
1594 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1596 commit 9570bcd87f4db255514f43b6701746c412f8fef0
1597 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1598 Date: Thu Nov 15 10:03:45 2007 +0100
1600 AVR32: Fix wrong pin setup for USART3
1602 As reported by Gerhard Berghofer:
1604 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
1605 instead of PB18 and PB19.
1607 which is obviously correct. There's currently no code that uses
1608 USART3, but custom boards may run into problems.
1610 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1612 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
1613 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1614 Date: Thu Nov 1 12:44:20 2007 +0100
1616 README: Remove ATSTK1000 daughterboard list
1618 As noted by Kim Phillips, these lists tend to become out of date.
1620 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1622 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
1623 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1624 Date: Tue Oct 30 14:56:36 2007 +0100
1626 Add ATSTK100[234] to MAINTAINERS
1628 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
1629 "mother". Also update the entry for ATSTK1000 to be not only about the
1630 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
1632 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1634 commit 64ff2357b1727213803591813dbc779c924bf772
1635 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1636 Date: Mon Oct 29 13:02:54 2007 +0100
1638 AVR32: Add support for the ATSTK1004 board
1640 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
1641 which is a derivative of AT32AP7000.
1643 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1645 commit 667568db157f374b85abd7e03596ddd1f0b25681
1646 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1647 Date: Mon Oct 29 13:02:54 2007 +0100
1649 AVR32: Add support for the ATSTK1003 board
1651 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
1652 which is a derivative of AT32AP7000.
1654 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1656 commit 5fee84a794a51ec830548cda485a770efb018b92
1657 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1658 Date: Mon Oct 29 13:23:33 2007 +0100
1660 AVR32: Make some AT32AP700x peripherals optional
1662 Add a chip-features file providing definitions of the form
1664 AT32AP700x_CHIP_HAS_<peripheral>
1666 to indicate the availability of the given peripheral on the currently
1669 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1671 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
1672 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1673 Date: Mon Oct 29 13:09:56 2007 +0100
1675 AVR32: Rename at32ap7000 -> at32ap700x
1677 The SoC-specific code for all the AT32AP700x CPUs is practically
1678 identical; the only difference is that some chips have less features
1679 than others. By doing this rename, we can add support for the AP7000
1680 derivatives simply by making some features conditional.
1682 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1684 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
1685 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1686 Date: Fri Jun 29 18:22:34 2007 +0200
1688 atmel_mci: Show SR when block read fails
1690 Show controller status as well as card status when an error occurs
1693 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1695 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
1696 Author: Stefan Roese <sr@denx.de>
1697 Date: Thu Dec 13 14:52:53 2007 +0100
1699 ppc4xx: Bring 4xx fdt support up-to-date
1701 This patch update the 4xx fdt support. It enabled fdt booting
1702 on the AMCC Kilauea and Sequoia for now. More can follow later
1705 Signed-off-by: Stefan Roese <sr@denx.de>
1707 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
1708 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1709 Date: Thu Dec 13 12:56:34 2007 +0100
1711 cfi_flash: Use map_physmem() and unmap_physmem()
1713 Use map_physmem() and unmap_physmem() to convert from physical to
1714 virtual addresses. This gives the arch a chance to provide an uncached
1715 mapping for flash accesses.
1717 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1719 commit 4d7d6936eb29af7cca330937808312aa5f61454d
1720 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1721 Date: Thu Dec 13 12:56:33 2007 +0100
1723 Introduce map_physmem() and unmap_physmem()
1725 map_physmem() returns a virtual address which can be used to access a
1726 given physical address without involving the cache. unmap_physmem()
1727 should be called when the virtual address returned by map_physmem() is
1730 This patch adds a stub implementation which simply returns the
1731 physical address cast to a uchar * for all architectures except AVR32,
1732 which converts the physical address to an uncached virtual mapping.
1733 unmap_physmem() is a no-op on all architectures, but if any
1734 architecture needs to do such mappings through the TLB, this is the
1735 hook where those TLB entries can be invalidated.
1737 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1739 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
1740 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1741 Date: Thu Dec 13 12:56:32 2007 +0100
1743 cfi_flash: Introduce read and write accessors
1745 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
1746 them to access the flash memory. This makes it clearer when the flash
1747 is actually being accessed; merely dereferencing a volatile pointer
1748 looks just like any other kind of access.
1750 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1752 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
1753 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1754 Date: Thu Dec 13 12:56:31 2007 +0100
1756 Implement __raw_{read,write}[bwl] on all architectures
1758 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
1759 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
1762 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1764 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
1765 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1766 Date: Sat Oct 6 18:55:36 2007 +0200
1768 cfi_flash: Reorder functions and eliminate extra prototypes
1770 Reorder the functions in cfi_flash.c so that each function only uses
1771 functions that have been defined before it. This allows the static
1772 prototype declarations near the top to be eliminated and might allow
1773 gcc to do a better job inlining functions.
1775 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1777 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
1778 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1779 Date: Thu Dec 13 12:56:29 2007 +0100
1781 cfi_flash: Make some needlessly global functions static
1783 Make functions not declared in any header file static.
1785 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1787 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
1788 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1789 Date: Thu Dec 13 12:56:28 2007 +0100
1791 cfi_flash: Break long lines
1793 This patch tries to keep all lines in the cfi_flash driver below 80
1794 columns. There are a few lines left which don't fit this requirement
1795 because I couldn't find any trivial way to break them (i.e. it would
1796 take some restructuring, which I intend to do in a later patch.)
1798 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1800 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
1801 Author: Bartlomiej Sieka <tur@semihalf.com>
1802 Date: Tue Dec 11 13:59:57 2007 +0100
1804 CFI: synchronize command offsets with Linux CFI driver
1806 Fixes non-working CFI Flash on the Inka4x0 board.
1808 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1810 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
1811 Author: Kumar Gala <galak@kernel.crashing.org>
1812 Date: Fri Dec 7 12:17:34 2007 -0600
1814 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
1816 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
1817 (MPC8544DS, MPC8548CDS, MPC8568MDS).
1819 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1821 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
1822 Author: Kumar Gala <galak@kernel.crashing.org>
1823 Date: Fri Dec 7 12:04:30 2007 -0600
1825 Update Freescale MPC85xx ADS/CDS/MDS board config
1827 * Enabled CONFIG_CMD_ELF
1829 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1831 commit d435793229ce29a42797c1edc39f5b34f987f91a
1832 Author: Kumar Gala <galak@kernel.crashing.org>
1833 Date: Fri Dec 7 04:59:26 2007 -0600
1835 Handle Asynchronous DDR clock on 85xx
1837 The MPC8572 introduces the concept of an asynchronous DDR clock with
1838 regards to the platform clock.
1840 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
1843 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1845 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
1846 Author: Kumar Gala <galak@kernel.crashing.org>
1847 Date: Thu Nov 29 10:34:28 2007 -0600
1849 Update Freescale MPC85xx ADS/CDS/MDS board config
1851 * Removed some misc environment setup
1852 * Enabled CONFIG_CMDLINE_EDITING
1854 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1856 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
1857 Author: Kumar Gala <galak@kernel.crashing.org>
1858 Date: Thu Nov 29 10:47:44 2007 -0600
1860 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
1862 Minor path corrections needed to ensure buildability.
1864 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1866 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
1867 Author: Kumar Gala <galak@kernel.crashing.org>
1868 Date: Thu Nov 29 10:16:18 2007 -0600
1870 Move the MPC8540 ADS board under board/freescale.
1872 Minor path corrections needed to ensure buildability.
1874 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1876 commit 870ceac5b3a3486c109396e005af81ae762b5710
1877 Author: Kumar Gala <galak@kernel.crashing.org>
1878 Date: Thu Nov 29 10:14:50 2007 -0600
1880 Move the MPC8560 ADS board under board/freescale.
1882 Minor path corrections needed to ensure buildability.
1884 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1886 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
1887 Author: Kumar Gala <galak@kernel.crashing.org>
1888 Date: Thu Nov 29 10:13:47 2007 -0600
1890 Move the MPC8568 MDS board under board/freescale.
1892 Minor path corrections needed to ensure buildability.
1894 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1896 commit a853d56c59b33415304531443633808736acfc6e
1897 Author: Kumar Gala <galak@kernel.crashing.org>
1898 Date: Thu Nov 29 02:18:59 2007 -0600
1900 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
1902 We already had defines for LAWAR_TRGT_IF_* that we should use
1903 rather than creating new ones. Also, added some missing defines for
1906 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1908 commit 04db400892da37b76a585e332a0c137954ad2015
1909 Author: Kumar Gala <galak@kernel.crashing.org>
1910 Date: Thu Nov 29 02:10:09 2007 -0600
1912 Stop using immap_t on 85xx
1914 In the future the offsets to various blocks may not be in same location.
1915 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
1916 instead of getting it via &immap.
1918 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1920 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
1921 Author: Kumar Gala <galak@kernel.crashing.org>
1922 Date: Thu Nov 29 01:23:09 2007 -0600
1924 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
1926 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1928 commit c480861bf000156e6a3e932c258db59ff2212dd3
1929 Author: Kumar Gala <galak@kernel.crashing.org>
1930 Date: Thu Nov 29 01:06:19 2007 -0600
1932 Update MPC8568 MDS to use libfdt
1934 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
1935 ethernet, pci, and serial for the various fixups that are done.
1937 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1939 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
1940 Author: Haiying Wang <Haiying.Wang@freescale.com>
1941 Date: Wed Nov 14 15:52:06 2007 -0500
1943 Add PCI Express support on MPC8568MDS
1945 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1946 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1948 commit b90d25497625b90ffa3f2911a0895ca237556ff5
1949 Author: Kumar Gala <galak@kernel.crashing.org>
1950 Date: Thu Nov 29 00:11:44 2007 -0600
1952 Update MPC85xx CDS to use libfdt
1954 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
1955 ethernet, pci, and serial for the various fixups that are done.
1957 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1959 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
1960 Author: Kumar Gala <galak@kernel.crashing.org>
1961 Date: Wed Nov 28 22:54:27 2007 -0600
1963 Update MPC8540 ADS to use libfdt
1965 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
1966 ethernet, pci, and serial for the various fixups that are done.
1968 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1970 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
1971 Author: Kumar Gala <galak@kernel.crashing.org>
1972 Date: Wed Nov 28 22:40:31 2007 -0600
1974 Update MPC8560 ADS to use libfdt
1976 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
1977 ethernet, pci, and serial for the various fixups that are done.
1979 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1981 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
1982 Author: Kumar Gala <galak@kernel.crashing.org>
1983 Date: Wed Nov 28 00:36:33 2007 -0600
1985 Stop using immap_t for cpm offset on 85xx
1987 In the future the offsets to various blocks may not be in same location.
1988 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
1989 instead of getting it via &immap->im_cpm.
1991 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1993 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
1994 Author: Kumar Gala <galak@kernel.crashing.org>
1995 Date: Tue Nov 27 23:25:02 2007 -0600
1997 Stop using immap_t for guts offset on 85xx
1999 In the future the offsets to various blocks may not be in same location.
2000 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
2001 instead of getting it via &immap->im_gur.
2003 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2005 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
2006 Author: Kumar Gala <galak@kernel.crashing.org>
2007 Date: Tue Nov 27 22:42:34 2007 -0600
2009 Update MPC8544 DS config
2011 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
2012 * Removed some misc environment setup
2013 * Moved to using fdtfile & fdtaddr as fdt env var names
2014 * Enabled CONFIG_CMDLINE_EDITING
2016 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2018 commit addce57e2e4c49e77ffb2020a84690713bb18b47
2019 Author: Kumar Gala <galak@kernel.crashing.org>
2020 Date: Mon Nov 26 17:12:24 2007 -0600
2022 Update MPC8544DS to use libfdt
2024 Updated the MPC8544DS config to use libfdt and assume use of aliases for
2025 ethernet, pci, and serial for the various fixups that are done.
2027 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2029 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
2030 Author: Kumar Gala <galak@kernel.crashing.org>
2031 Date: Thu Nov 29 00:15:30 2007 -0600
2033 Add libfdt based ft_cpu_setup for mpc85xx
2035 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2037 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
2038 Author: Stefan Roese <sr@denx.de>
2039 Date: Tue Dec 11 13:38:19 2007 +0100
2041 ppc4xx: Correct GPIO offset in gpio_config()
2043 Thanks to Gary Jennejohn for pointing this out.
2045 Signed-off-by: Stefan Roese <sr@denx.de>
2047 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
2048 Author: Stefan Roese <sr@denx.de>
2049 Date: Tue Dec 11 11:46:01 2007 +0100
2051 rtc: Fix merging problem
2053 Signed-off-by: Stefan Roese <sr@denx.de>
2055 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
2056 Author: Stefan Roese <sr@denx.de>
2057 Date: Sat Dec 8 14:47:34 2007 +0100
2059 ppc4xx: 405EX: Correctly enable USB pins
2061 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
2062 function control) registers. This is done for the AMCC Kilauea and
2065 Signed-off-by: Stefan Roese <sr@denx.de>
2067 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
2068 Author: Stefan Roese <sr@denx.de>
2069 Date: Sat Dec 8 08:25:09 2007 +0100
2071 CFI: Coding style cleanup
2073 Signed-off-by: Stefan Roese <sr@denx.de>
2075 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
2076 Author: Michael Schwingen <michael@schwingen.org>
2077 Date: Fri Dec 7 23:35:02 2007 +0100
2079 CFI: support JEDEC flash roms in CFI-flash framework
2081 The following patch adds support for non-CFI flash ROMS, by hooking into the
2082 CFI flash code and using most of its code, as recently discussed here in the
2083 thread "Mixing CFI and non-CFI flashs".
2085 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2086 Signed-off-by: Stefan Roese <sr@denx.de>
2088 commit c01b17dd856fa120b2970f50d9598546a4927ec3
2089 Author: Gerald Van Baren <vanbaren@cideas.com>
2090 Date: Wed Nov 28 21:24:50 2007 -0500
2092 Conditionally compile fdt_fixup_ethernet()
2094 Fix compiler warnings: On boards that don't have ethernets defined,
2095 don't compile fdt_fixup_ethernet().
2097 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
2098 Author: Kumar Gala <galak@kernel.crashing.org>
2099 Date: Tue Nov 27 21:59:46 2007 -0600
2101 Convert boards that set memory node to use fdt_fixup_memory()
2103 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2105 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
2106 Author: Kumar Gala <galak@kernel.crashing.org>
2107 Date: Mon Nov 26 17:06:15 2007 -0600
2109 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
2111 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
2112 determine which serial alias we should set linux,stdout-path to.
2114 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2116 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
2117 Author: Kumar Gala <galak@kernel.crashing.org>
2118 Date: Mon Nov 26 14:57:45 2007 -0600
2120 Add common memory fixup function
2122 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
2124 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2126 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
2127 Author: Kumar Gala <galak@kernel.crashing.org>
2128 Date: Mon Nov 26 11:19:12 2007 -0600
2130 Conditionally compile fdt_support.c
2132 Modify common/Makefile to conditionally compile fdt_support.c based
2133 on CONFIG_OF_LIBFDT.
2135 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2137 commit d88e7ba0980773479e1a64badb293116071b7ef0
2138 Author: Kumar Gala <galak@kernel.crashing.org>
2139 Date: Mon Nov 26 10:41:40 2007 -0600
2141 Fix build breakage due to libfdt import
2143 The IDS8247 got lost in the update and need an API update
2144 do to rename of functions in libfdt.
2146 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2148 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
2149 Author: Gerald Van Baren <vanbaren@cideas.com>
2150 Date: Fri Nov 23 19:43:20 2007 -0500
2152 Add spaces around the = in the fdt print format.
2154 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2156 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
2157 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2158 Date: Fri Dec 7 01:25:38 2007 +0900
2160 sh: Moved driver of the SuperH dependence
2162 The composition of the directory in the drivers/ changed.
2163 I moved SuperH serial driver and marubun PCMCIA driver.
2165 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2167 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
2168 Author: Wolfgang Denk <wd@denx.de>
2169 Date: Thu Dec 6 10:21:19 2007 +0100
2173 Signed-off-by: Wolfgang Denk <wd@denx.de>
2175 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
2176 Author: Wolfgang Denk <wd@denx.de>
2177 Date: Thu Dec 6 10:21:03 2007 +0100
2179 ADS5121 Board: fix compile problem.
2181 Signed-off-by: Wolfgang Denk <wd@denx.de>
2183 commit a27044b14a9e93678a82d7b35f202b93e7687abc
2184 Author: Stefan Roese <sr@denx.de>
2185 Date: Thu Dec 6 05:58:43 2007 +0100
2187 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
2189 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
2190 setting the FIXD bit in the SDR0_MFR register. Here a description of the
2194 ------------------------------
2195 If a DMA is performed between memory and PCI with the DMA 1 Controller
2196 using prefetch, and as a result uses a special purpose buffer selected by
2197 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
2198 the first part of the transfer sequence is performed twice. The
2199 PPC440SPe PCI Controller requests more data than was needed such that in
2200 the case of enforce memory protection, a host CPU exception can occur.
2201 No data is corrupted, because data transfer is stopped in the PCI
2202 Controller. Prefetch enable is specified by setting DMA Configuration
2203 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
2205 Behavior that may be observed in a running system
2206 ---------------------------------------------------------------------------
2208 1. DMA performance is decreased because of the double access on the PCI bus
2210 2. If an illegal access to some address on the PCI bus is detected at the
2211 system level, a machine check or similar system error may occur.
2213 Workarounds Available
2214 ----------------------------------
2216 1. Do not program prefetch. Note that a prefetch command cannot be programmed
2217 without selecting a special purpose buffer.
2218 2. To avoid crossing a physical boundary of the PCI slave device, add 512
2219 bytes of address to the PCI address range.
2221 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
2222 from AMCC and slighly changed.
2224 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
2225 Signed-off-by: Stefan Roese <sr@denx.de>
2227 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
2228 Author: Stefan Roese <sr@denx.de>
2229 Date: Tue Dec 4 16:29:48 2007 +0100
2231 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
2233 Signed-off-by: Stefan Roese <sr@denx.de>
2235 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
2236 Author: Wolfgang Denk <wd@denx.de>
2237 Date: Mon Dec 3 00:15:28 2007 +0100
2239 Prepare for 1.3.1-rc1
2241 Signed-off-by: Wolfgang Denk <wd@denx.de>
2243 commit e15e33433e7c05111968dc9b434a52fd42cbd221
2244 Author: Stefan Roese <sr@denx.de>
2245 Date: Fri Nov 30 07:15:41 2007 +0100
2247 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
2249 This manual PCIe reset triggering solves the problem seen with the
2250 Intel EPRO/1000 card, which was not detected (link not established)
2251 upon power-up reset.
2253 Signed-off-by: Stefan Roese <sr@denx.de>
2255 commit 260eea5676ca46903a335686cc020b29c4ca46fe
2256 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2257 Date: Thu Nov 29 01:21:54 2007 +0900
2259 sh: Add SuperH boards maintainer to MAINTAINERS file
2261 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
2263 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2265 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
2266 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2267 Date: Thu Nov 29 00:13:04 2007 +0900
2269 sh: Add ms7750se support in MAKEALL
2271 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2273 commit c7144373427a178332bf9754131c8c34c52c200a
2274 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2275 Date: Tue Nov 27 09:44:53 2007 +0100
2277 sh: Add sh3 and sh4 support in MAKEALL
2279 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2280 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2282 commit 130080874a3d28450098481a262c5f7c855e908d
2283 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2284 Date: Sun Nov 25 02:51:17 2007 +0900
2286 sh: Add document for SuperH.
2288 This document is a summary of information concerning SuperH of U-Boot.
2290 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2292 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
2293 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2294 Date: Sun Nov 25 02:39:31 2007 +0900
2296 sh: Add marubun's pcmcia driver
2298 Marubun pcmcia is a chip for PCMCIA used with SuperH.
2299 Of course, this can be used even by other architectures.
2300 When use this driver, came to be able to use CompactFlash
2303 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2305 commit febd86b969b975289ed948f1ac0eb9722da41ced
2306 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2307 Date: Sun Nov 25 02:32:13 2007 +0900
2309 sh: Update SuperH SCIF driver
2311 - Changed volatile unsigned to vu_.
2312 - Changed Makefile for kconfig.
2314 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2316 commit 8be760903645af09871be50ad0a6f9ebb62b311d
2317 Author: Stefan Roese <sr@denx.de>
2318 Date: Tue Nov 27 11:57:35 2007 +0100
2320 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
2322 After an error in the AMCC 405EX users manual now correctly configure
2323 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
2326 Signed-off-by: Stefan Roese <sr@denx.de>
2328 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
2329 Author: Wolfgang Denk <wd@denx.de>
2330 Date: Mon Nov 26 19:18:21 2007 +0100
2332 Cleanup coding style; update CHANGELOG
2334 Signed-off-by: Wolfgang Denk <wd@denx.de>
2336 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
2337 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2338 Date: Sun Nov 25 22:39:25 2007 +0100
2340 MAKEALL: add missing 512x boards in ppc
2342 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2344 commit a340c325e668ca7386c2276387681720be9c3757
2345 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2346 Date: Sun Nov 25 18:45:47 2007 +0100
2348 Makefile : fix tags ctags etags with new drivers organization
2350 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2352 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
2353 Author: Stefan Roese <sr@denx.de>
2354 Date: Mon Nov 26 15:06:14 2007 +0100
2356 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
2358 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
2361 Signed-off-by: Stefan Roese <sr@denx.de>
2363 commit ca1ce226287270bb01e25b8e3674c701f12edf19
2364 Author: Stefan Roese <sr@denx.de>
2365 Date: Mon Nov 26 15:01:45 2007 +0100
2367 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
2369 Signed-off-by: Stefan Roese <sr@denx.de>
2371 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
2372 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2373 Date: Sun Nov 25 18:45:47 2007 +0100
2375 Makefile : fix tags ctags etags with new drivers organization
2377 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2379 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
2380 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2381 Date: Sat Nov 24 21:26:56 2007 +0100
2383 drivers/mtd : move mtd drivers to drivers/mtd
2385 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2387 commit 318c0b90431f2648552e5ade78833f42652ce859
2388 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2389 Date: Sat Nov 24 21:17:55 2007 +0100
2391 drivers/misc : move misc drivers to drivers/misc
2393 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2395 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
2396 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2397 Date: Sat Nov 24 21:13:59 2007 +0100
2399 drivers/block : move block drivers to drivers/block
2401 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2403 commit 0c698dcaa70275eb8814f665b545547cee013892
2404 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2405 Date: Sat Nov 24 20:59:50 2007 +0100
2407 drivers/rtc : move rtc drivers to drivers/rtc
2409 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2411 commit f868cc5a50757d94f36c312395481cb0f187d9e6
2412 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2413 Date: Sat Nov 24 20:14:44 2007 +0100
2415 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
2417 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2419 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
2420 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2421 Date: Sat Nov 24 19:46:45 2007 +0100
2423 drivers/input : move input drivers to drivers/input
2425 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2427 commit e4558666293364fc3af1c1d9381ca933fa0f1275
2428 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2429 Date: Sat Nov 24 19:40:11 2007 +0100
2431 drivers/usb : move usb drivers to drivers/usb
2433 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2435 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
2436 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2437 Date: Sat Nov 24 19:33:38 2007 +0100
2439 drivers/serial : move serial drivers to drivers/serial
2441 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2443 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
2444 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2445 Date: Wed Nov 21 21:19:24 2007 +0100
2447 drivers/net : move net drivers to drivers/net
2449 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2451 commit 352d259130b349fe9593b8dada641bd78a9659e5
2452 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2453 Date: Tue Nov 20 20:41:48 2007 +0100
2455 drivers/video : move video drivers to drivers/video
2457 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2459 commit 73646217186aa17afc8e305c5f06f06dd335eaad
2460 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2461 Date: Tue Nov 20 20:33:09 2007 +0100
2463 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
2465 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2467 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
2468 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2469 Date: Tue Nov 20 20:28:09 2007 +0100
2471 drivers/pci : move pci drivers to drivers/pci
2473 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2475 commit 9162352817579840d7802da6d85872b3ca003c97
2476 Author: Gerald Van Baren <vanbaren@cideas.com>
2477 Date: Thu Nov 22 17:23:23 2007 -0500
2479 Fix fdt printing for updated libfdt
2481 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
2483 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2485 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
2486 Author: Kumar Gala <galak@kernel.crashing.org>
2487 Date: Wed Nov 21 13:30:15 2007 -0600
2489 Add additional fdt fixup helper functions
2491 Added the following fdt fixup helpers:
2492 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
2493 * do_fixup_by_compat{_u32} - Find matching nodes by compat
2495 The _u32 variants work the same only the property they are setting
2496 is know to be a 32-bit integer instead of a byte buffer.
2498 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2500 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
2501 Author: Kumar Gala <galak@kernel.crashing.org>
2502 Date: Wed Nov 21 11:11:03 2007 -0600
2504 Add fdt_fixup_ethernet helper to set mac addresses
2506 Added a fixup helper that uses aliases to set mac addresses
2507 in the device tree based on the bd_t
2509 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2511 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
2512 Author: Kumar Gala <galak@kernel.crashing.org>
2513 Date: Wed Nov 21 14:07:46 2007 -0600
2515 Fix warnings from import of libfdt
2517 cmd_fdt.c: In function fdt_print:
2518 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
2519 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
2520 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
2521 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
2523 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2525 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
2526 Author: Kumar Gala <galak@kernel.crashing.org>
2527 Date: Wed Oct 24 11:04:22 2007 -0500
2529 Update libfdt from device tree compiler (dtc)
2531 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
2532 the device tree compiler (dtc) project.
2534 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2536 commit e93becf80d732b64aef81b23e8b6ece02c40533d
2537 Author: Kumar Gala <galak@kernel.crashing.org>
2538 Date: Sat Nov 3 19:46:28 2007 -0500
2540 Move do_fixup* for libfdt into common code
2542 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
2543 into common/fdt_support.c and renamed:
2545 do_fixup() -> do_fixup_by_path()
2546 do_fixup_u32() -> do_fixup_by_path_u32()
2548 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2550 commit f738b4a75998f42a7408defadc9baac7a31c92db
2551 Author: Kumar Gala <galak@kernel.crashing.org>
2552 Date: Thu Oct 25 16:15:07 2007 -0500
2554 Make no options to fdt print default to '/'
2556 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2558 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
2559 Author: Kumar Gala <galak@kernel.crashing.org>
2560 Date: Wed Oct 24 10:21:57 2007 -0500
2562 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
2565 fdt_node_is_compatible
2566 fdt_find_node_by_type
2567 fdt_find_compatible_node
2569 To ease merge of newer libfdt as we aren't using them anywhere at this time.
2571 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
2574 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2576 commit 98e2867cc85409b919f862e6c16026461ec955df
2577 Author: Grant Likely <grant.likely@secretlab.ca>
2578 Date: Wed Nov 21 09:19:37 2007 -0700
2580 [BUILD] Remove libraries when updating autoconf.mk
2582 Fix library problems caused by conditional compilation. Using
2583 autoconf.mk to decide which files to compile has caused a problem when
2584 changing configuration from one board to another without clearing out
2585 the library (*.a) files.
2587 It used to be that the linker was always passed the same list of .o
2588 files when building the .a files. However, that is not longer true
2589 with conditional compilation. Now, a different board config will have
2590 a different file list passed to the linker. The problem occurs when
2591 a library has already been built and the board config is changed.
2593 Since the linker will update instead of replace a preexisting library,
2594 then if the file list changes to remove some object files the old
2595 objects will still exist in the library.
2597 The solution is to remove all old library files when autoconf.mk is
2600 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2602 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
2603 Author: Kumar Gala <galak@kernel.crashing.org>
2604 Date: Wed Nov 21 08:49:50 2007 -0600
2606 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
2608 Modify libfdt/Makefile to conditionally compile the *.c files based
2609 on the board config.
2611 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2613 commit 4a43719a7738712811d822ca8125427b27a55cdc
2614 Author: Grant Likely <grant.likely@secretlab.ca>
2615 Date: Mon Sep 24 09:05:31 2007 -0600
2617 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
2619 Modify common/Makefile to conditionally compile the cmd_*.c files based
2620 on the board config.
2622 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2624 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
2625 Author: Grant Likely <grant.likely@secretlab.ca>
2626 Date: Mon Sep 24 09:05:31 2007 -0600
2628 [BUILD] Generate include/autoconf.mk from board config files
2630 Use cpp and sed to postprocess config.h and import the defined values
2631 into include/autoconf.mk. autoconf.mk is then included by config.mk to
2632 give 'make' access to the board configuration.
2634 Doing this enables conditional compilation at the Makefile level instead
2635 of by wrapping every .c file with #ifdef/#endif wrappers.
2637 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2639 commit 68b88999da87ab88e71e1306192905be3450198e
2640 Author: Jon Loeliger <jdl@freescale.com>
2641 Date: Tue Nov 20 15:02:26 2007 -0600
2643 8610HPCD: Enable the 8610 Display Interface Unit
2645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2647 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
2648 Author: Jon Loeliger <jdl@freescale.com>
2649 Date: Tue Nov 20 15:00:53 2007 -0600
2651 Move 8610 DIU interface structure definitions to header file.
2653 These two structures are still needed during the
2654 initialization and setup of the DIU hardware.
2655 So move them to the fsl_diu_fb.h file for now.
2658 Noticed-by: York Sun <yorksun@freescale.com>
2659 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2661 commit 080c646dbf474a109c3f85718fb01ce042a38c45
2662 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2663 Date: Tue Nov 20 20:14:18 2007 +0100
2665 drivers/i2c : move i2c drivers to drivers/i2c
2667 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2669 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
2670 Author: Wolfgang Denk <wd@denx.de>
2671 Date: Mon Nov 19 22:20:24 2007 +0100
2673 Prepare for 1.3.0 release.
2675 Signed-off-by: Wolfgang Denk <wd@denx.de>
2677 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
2678 Author: Haiying Wang <Haiying.Wang@freescale.com>
2679 Date: Mon Nov 19 10:02:13 2007 -0500
2681 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
2683 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
2685 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2687 commit f8c320609366176b31104d9bf5e295232e1c7f1d
2688 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2689 Date: Mon Nov 19 11:14:16 2007 +0900
2691 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
2693 lowlevel_init.S: Assembler messages:
2694 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
2696 Looking at codes, the `memtest' and `clearmem' are intentional mixed
2697 use of `global symbols' and `label' for debugging purpose. To make it
2698 build, just disable global-symbols-use for now. As a result `memtest'
2699 still remains as unused, but leave it be...
2701 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2703 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
2704 Author: Wolfgang Denk <wd@denx.de>
2705 Date: Mon Nov 19 12:59:14 2007 +0100
2707 Fix build problems with mp2usb board
2709 Signed-off-by: Wolfgang Denk <wd@denx.de>
2711 commit 6bf4c686afca1e86e1c384d59218f914605713bf
2712 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2713 Date: Sun Nov 18 18:36:11 2007 +0100
2715 s3c24x0: Fix usb_ohci.c missing in Makefile
2716 and usb_ohci.c warning differ in signedness
2718 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2720 commit 6073f61e078da5ddb521b56256bcc36508589883
2721 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2722 Date: Sun Nov 18 12:55:02 2007 +0100
2724 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
2726 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2728 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
2729 Author: Wolfgang Denk <wd@denx.de>
2730 Date: Sun Nov 18 17:11:09 2007 +0100
2732 Fix compiler warnings for ARM systems.
2734 Signed-off-by: Wolfgang Denk <wd@denx.de>
2736 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
2737 Author: Wolfgang Denk <wd@denx.de>
2738 Date: Sun Nov 18 16:36:27 2007 +0100
2740 Fix compiler warnings for PPC systems. Update CHANGELOG.
2742 Signed-off-by: Wolfgang Denk <wd@denx.de>
2744 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
2745 Author: Stefan Roese <sr@denx.de>
2746 Date: Sun Nov 18 14:44:44 2007 +0100
2748 ppc4xx: Correct 405EX PCIe UTL register mapping
2750 Map 4k mem space for UTL registers for each port.
2752 Signed-off-by: Stefan Roese <sr@denx.de>
2754 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
2755 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2756 Date: Sat Nov 17 11:31:10 2007 +0100
2758 Fix warning differ in signedness in net/net.c and net/nfs.c
2760 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
2761 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2762 Date: Sat Nov 17 20:42:45 2007 +0900
2764 gth2.c: Fix a warning on gth2 build.
2766 gth2.c: In function 'misc_init_r':
2767 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
2769 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2771 commit 2309c130aa4c84b91bd874a41269c923eb61b555
2772 Author: Stefan Roese <sr@denx.de>
2773 Date: Sat Nov 17 07:58:25 2007 +0100
2775 Fix warning differ in signedness in common/cmd_scsi.c
2777 Signed-off-by: Stefan Roese <sr@denx.de>
2779 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
2780 Author: Stefan Roese <sr@denx.de>
2781 Date: Sat Nov 17 14:52:29 2007 +0100
2783 ppc4xx: Update AMCC Kilauea config file
2785 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
2787 Signed-off-by: Stefan Roese <sr@denx.de>
2789 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
2790 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2791 Date: Sat Nov 17 20:05:26 2007 +0900
2793 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
2795 Current trick to pick up GNU assembler minor version does not work with the
2796 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
2799 $ sde-as --version |grep "GNU assembler"
2800 GNU assembler 2.15.94 mipssde-6.02.02-20050602
2801 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
2803 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
2807 $ mips-linux-as --version |grep "GNU assembler"
2808 GNU assembler (GNU Binutils) 2.18
2809 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
2811 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
2815 As a result of above, you'll see many noises with such binutils:
2818 /bin/sh: line 0: [: : integer expression expected
2819 /bin/sh: line 0: [: : integer expression expected
2820 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
2821 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
2822 /bin/sh: line 0: [: : integer expression expected
2823 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
2824 /bin/sh: line 0: [: : integer expression expected
2825 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
2826 /bin/sh: line 0: [: : integer expression expected
2828 This patch simplifies the trick and makes it work with both versions of gas.
2829 I also replace an expensive `awk (or gawk)' with `cut'.
2831 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2833 commit 16664f72850846e645616da1c0fa5afcd6d15f15
2834 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2835 Date: Sat Nov 17 20:05:26 2007 +0900
2837 [MIPS] Remove useless instructions for initializing $gp.
2839 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2841 commit 03c031d5660ea946c39af6e2e16267da857c609f
2842 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2843 Date: Sat Oct 27 15:27:06 2007 +0900
2845 [MIPS] MIPS 4K core: Coding style cleanups
2849 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2851 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
2852 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2853 Date: Sat Nov 17 20:05:20 2007 +0900
2855 [MIPS] gth2.c: Fix a warning on gth2 build.
2857 gth2.c: In function 'misc_init_r':
2858 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
2860 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2862 commit 4fbd0741b2b6441da10be93e10267122581b7079
2863 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2864 Date: Sat Oct 27 15:22:33 2007 +0900
2866 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
2868 au1x00_eth.c: In function 'au1x00_miiphy_write':
2869 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
2871 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2873 commit f01320459736f156707425cf8112f98606301aa4
2874 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2875 Date: Sat Oct 27 15:00:25 2007 +0900
2877 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
2879 au1x00_eth.c: In function 'au1x00_enet_initialize':
2880 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
2881 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
2882 au1x00_eth.c:246: error: for each function it appears in.)
2883 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
2884 au1x00_eth.c: In function 'au1x00_miiphy_write':
2885 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
2886 make[1]: *** [au1x00_eth.o] Error 1
2888 Fixed by moving these two functions forward.
2890 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2892 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
2893 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2894 Date: Sat Oct 27 15:00:25 2007 +0900
2896 MAKEALL: Added missing pb1000 board
2898 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2900 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
2901 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2902 Date: Sat Oct 27 15:00:24 2007 +0900
2904 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
2906 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2908 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
2909 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2910 Date: Sat Oct 27 15:00:24 2007 +0900
2912 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
2914 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2916 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
2917 Author: Wolfgang Denk <wd@denx.de>
2918 Date: Sat Nov 17 02:34:38 2007 +0100
2920 Update CHANGELOIG, prepare for -rc4
2922 Signed-off-by: Wolfgang Denk <wd@denx.de>
2924 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
2925 Author: Luotao Fu <l.fu@pengutronix.de>
2926 Date: Wed Nov 14 18:58:33 2007 +0100
2928 Fix the i2c frequency and default address in rsdproto board
2930 rsdproto board support has wrong I2C frequency and wrong return value
2933 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2935 commit 429c180edad038f91c989cb14b478228092e7054
2936 Author: Wolfgang Denk <wd@denx.de>
2937 Date: Sat Nov 17 01:45:38 2007 +0100
2939 powerpc: Backout relocation changes for MPC5121, too.
2941 Apply Grant Likely's backout to MPC5121 code, too.
2943 Pointed out by Rafal Jaworowski <raj@semihalf.com>
2945 Signed-off-by: Wolfgang Denk <wd@denx.de>
2947 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
2948 Author: Grant Likely <grant.likely@secretlab.ca>
2949 Date: Tue Nov 13 22:18:33 2007 -0700
2951 powerpc: Backout relocation changes.
2953 Ugh. I *hate* to back this change out, but these compiler flags don't
2954 work for relocation on all versions of GCC. I've not been able to
2955 reproduce the environment in my setup (and hence, not been able to
2956 find a combination that *does* work), so I've got no choice but to go
2957 back to the old gcc flags and linker script.
2959 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2961 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
2962 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2963 Date: Tue Nov 13 09:11:05 2007 +0100
2965 Fixed mips_io_port_base build errors.
2967 This patch has been sent on:
2970 Although mips_io_port_base is currently a part of IDE command, it is quite
2971 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
2972 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
2974 This patch is triggered by multiple definition of `mips_io_port_base' build
2975 error on gth2 (and tb0229 also needs this fix.)
2977 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
2978 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
2979 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
2980 make: *** [u-boot] Error 1
2982 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2983 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2985 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
2986 Author: Wolfgang Denk <wd@denx.de>
2987 Date: Sat Nov 17 01:30:40 2007 +0100
2989 Fix a bug in the slave serial programming mode for the Xilinx
2990 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
2991 the most significant bit was set, which did not work on any
2992 architecture where "char" defaulted to be an unsigned type.
2994 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
2996 Signed-off-by: Wolfgang Denk <wd@denx.de>
2998 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
2999 Author: Jon Loeliger <jdl@freescale.com>
3000 Date: Thu Nov 1 12:23:29 2007 -0500
3002 86xx: Fix broken variable reference when #def DEBUGing.
3004 Sometimes you can't reference the DDR2 controller variables.
3006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3008 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
3009 Author: Jason Jin <Jason.jin@freescale.com>
3010 Date: Fri Oct 26 18:32:00 2007 +0800
3012 make 8610 board use pixis reset
3014 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3016 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
3017 Author: Jason Jin <Jason.jin@freescale.com>
3018 Date: Mon Oct 29 19:26:21 2007 +0800
3020 Unify pixis_reset altbank across board families
3022 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
3023 into the separate board config files.
3025 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3026 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3028 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
3029 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3030 Date: Wed Nov 7 08:19:21 2007 +0100
3032 Fix warning: pointer targets in assignment differ in signedness
3034 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3036 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
3037 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3038 Date: Wed Nov 7 08:19:19 2007 +0100
3040 Fix warning differ in signedness in common/cmd_ide.c
3042 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3044 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
3045 Author: Stefan Roese <sr@denx.de>
3046 Date: Fri Nov 16 14:16:54 2007 +0100
3048 ppc4xx: Enable 405EX PCIe UTL register configuration
3050 Till now the UTL registers on 405EX were not initialized but left with
3051 their default values. This patch new initializes some of the UTL
3054 Signed-off-by: Stefan Roese <sr@denx.de>
3056 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
3057 Author: Stefan Roese <sr@denx.de>
3058 Date: Fri Nov 16 14:00:59 2007 +0100
3060 ppc4xx: Update AMCC Makalu for board rev 1.1
3062 This patch adds changes needed for Makalu rev 1.1:
3064 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
3065 - Enable 2nd ethernet port EMAC1
3066 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
3067 - Reset PCIe ports via GPIO upon bootup
3069 Signed-off-by: Stefan Roese <sr@denx.de>
3071 commit 4d4faae65e115e327425cd514c1a35146a85166b
3072 Author: Grant Likely <grant.likely@secretlab.ca>
3073 Date: Mon Sep 24 09:05:31 2007 -0600
3075 Group PCI and PCMCIA drivers in drivers/Makefile
3077 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3079 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
3080 Author: Grant Likely <grant.likely@secretlab.ca>
3081 Date: Mon Sep 24 09:05:31 2007 -0600
3083 Group block/flash drivers in drivers/Makefile
3085 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3087 commit df58c81551700f058b44cacf55a7997fa63bfe0a
3088 Author: Grant Likely <grant.likely@secretlab.ca>
3089 Date: Mon Sep 24 09:05:31 2007 -0600
3091 Group USB drivers in drivers/Makefile
3093 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3095 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
3096 Author: Grant Likely <grant.likely@secretlab.ca>
3097 Date: Mon Sep 24 09:05:30 2007 -0600
3099 Group i2c drivers in drivers/Makefile
3101 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3103 commit ec00c76de0e5971273905998d62d6bb119324218
3104 Author: Grant Likely <grant.likely@secretlab.ca>
3105 Date: Mon Sep 24 09:05:30 2007 -0600
3107 Group console drivers in drivers/Makefile
3109 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3111 commit 754f230aa01b8c789fc31f8013c2487954073300
3112 Author: Grant Likely <grant.likely@secretlab.ca>
3113 Date: Mon Sep 24 09:05:30 2007 -0600
3115 Group network drivers in drivers/Makefile
3117 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3119 commit f0037c56b0d12cd46215124667b9f83d60ef9391
3120 Author: Grant Likely <grant.likely@secretlab.ca>
3121 Date: Mon Sep 24 09:05:30 2007 -0600
3123 Build: split COBJS value into multiple lines
3125 This change is in preparation for condtitionial compile support in the
3126 build system. By spliting them all into seperate lines now, subsequent
3127 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
3128 be less invasive and easier to review
3130 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3132 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
3133 Author: Grant Likely <grant.likely@secretlab.ca>
3134 Date: Mon Sep 24 09:05:30 2007 -0600
3136 Add .gitignore files
3138 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3139 Acked-by: Kim Phillips <kim.phillips@freescale.com>
3141 commit 955413f35f054a82e40042f1dbcf501c6a05719b
3142 Author: Grant Likely <grant.likely@secretlab.ca>
3143 Date: Thu Nov 15 08:27:52 2007 -0700
3145 Revert "Correct relocation fixup for mpc5xx"
3147 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
3148 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3150 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
3151 Author: Grant Likely <grant.likely@secretlab.ca>
3152 Date: Thu Nov 15 08:24:32 2007 -0700
3154 Revert "Correct fixup relocation for MPC5xxx"
3156 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
3157 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3159 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
3160 Author: Grant Likely <grant.likely@secretlab.ca>
3161 Date: Thu Nov 15 08:21:04 2007 -0700
3163 Revert "Correct fixup relocation for mpc8220"
3165 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
3166 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3168 commit 70922342369e5e39b286fe21e768a239ca07a514
3169 Author: Grant Likely <grant.likely@secretlab.ca>
3170 Date: Thu Nov 15 08:20:57 2007 -0700
3172 Revert "Correct fixup relocation for mpc824x"
3174 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
3175 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3177 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
3178 Author: Grant Likely <grant.likely@secretlab.ca>
3179 Date: Thu Nov 15 08:20:50 2007 -0700
3181 Revert "Correct fixup relocation for mpc8260"
3183 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
3184 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3186 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
3187 Author: Grant Likely <grant.likely@secretlab.ca>
3188 Date: Thu Nov 15 08:20:43 2007 -0700
3190 Revert "Correct fixup relocation for mpc83xx"
3192 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
3193 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3195 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
3196 Author: Grant Likely <grant.likely@secretlab.ca>
3197 Date: Thu Nov 15 08:20:25 2007 -0700
3199 Revert "[MPC512x] Correct fixup relocation"
3201 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
3202 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3204 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
3205 Author: Stefan Roese <sr@denx.de>
3206 Date: Thu Nov 15 14:25:09 2007 +0100
3208 ppc4xx: Small AMCC Kilauea cleanup
3210 Remove not needed pci_target_init() function.
3212 Signed-off-by: Stefan Roese <sr@denx.de>
3214 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
3215 Author: Stefan Roese <sr@denx.de>
3216 Date: Thu Nov 15 14:23:55 2007 +0100
3218 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
3220 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
3221 - Cleanup of the 4xx GPIO functions
3222 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
3224 Signed-off-by: Stefan Roese <sr@denx.de>
3226 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
3227 Author: Stefan Roese <sr@denx.de>
3228 Date: Thu Nov 15 14:20:08 2007 +0100
3230 ppc4xx: AMCC Taihu board config file cleanup
3232 This patch makes the AMCC Taihu a little more compatible to the other
3235 Signed-off-by: Stefan Roese <sr@denx.de>
3237 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
3238 Author: Marian Balakowicz <m8@semihalf.com>
3239 Date: Thu Nov 15 13:37:28 2007 +0100
3241 [INKA4x0] NG hardware: flash support
3243 Disabled and remove inka4x0 custom flash driver, use CFI flash
3246 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3248 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
3249 Author: Marian Balakowicz <m8@semihalf.com>
3250 Date: Thu Nov 15 13:29:55 2007 +0100
3252 [INKA4x0] NG hardware: SDRAM support
3254 Add support for three new DDR chips that may be present on a NG
3255 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
3257 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
3259 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3261 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
3262 Author: Marian Balakowicz <m8@semihalf.com>
3263 Date: Thu Nov 15 13:24:43 2007 +0100
3265 [INKA4x0] NG hardware: platform code update
3267 - Cleanup compile warnings.
3268 - Add missing '\0' in default environment.
3269 - Increase CFG_MONITOR_LEN to 256 KiB.
3270 - Add required CFG_USE_PPCENV.
3272 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3274 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
3275 Author: Peter Pearse <peter.pearse@arm.com>
3276 Date: Thu Nov 15 08:58:00 2007 +0000
3278 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
3279 Remove warnings re onenand_read() & write()
3281 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
3282 Author: Peter Pearse <peter.pearse@arm.com>
3283 Date: Thu Nov 15 08:45:13 2007 +0000
3287 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
3288 Author: Roy Zang <tie-fei.zang@freescale.com>
3289 Date: Thu Sep 13 18:52:28 2007 +0800
3291 Enable ULi1575 Ethernet support in 8610HPCD config
3293 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3294 Acked-by: Jon Loeliger <jdl@freescale.com>
3296 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
3297 Author: Stefan Roese <sr@denx.de>
3298 Date: Tue Nov 13 08:18:20 2007 +0100
3300 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
3302 Signed-off-by: Stefan Roese <sr@denx.de>
3304 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
3305 Author: Stefan Roese <sr@denx.de>
3306 Date: Tue Nov 13 08:06:11 2007 +0100
3308 ppc4xx: Fix 405EX PCIe UTLSET register setup
3310 Signed-off-by: Stefan Roese <sr@denx.de>
3312 commit 1ce55151c85d068f70317a8d65c61058b891afb4
3313 Author: Heiko Schocher <hs@denx.de>
3314 Date: Tue Nov 13 07:50:29 2007 +0100
3316 [UC101] SRAM now with 2 MB working.
3318 Signed-off-by: Heiko Schocher <hs@denx.de>
3320 commit 2d14684341109a69616e4d6016cd61402d55086f
3321 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3322 Date: Fri Nov 9 15:37:53 2007 +0100
3324 ppc4xx: Use generic usb-ohci driver for sequoia board
3326 This patch makes the sequoia board use the generic usb-ohci driver
3327 instead of cpu/ppc4xx/usb_ohci.c.
3329 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3330 Signed-off-by: Stefan Roese <sr@denx.de>
3332 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
3333 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3334 Date: Fri Nov 9 15:37:23 2007 +0100
3336 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
3338 This patch disables the 44x d-cache on 'usb start' and
3339 reenables it on 'usb stop'. This should be seen as a
3340 temporary fix until the generic usb-ohci driver can
3341 life with d-cache enabled.
3343 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3344 Signed-off-by: Stefan Roese <sr@denx.de>
3346 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
3347 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3348 Date: Fri Nov 9 15:36:44 2007 +0100
3350 ppc4xx: Remove redundant code from 4xx network driver
3352 This patch removes some redundant code and decrements the end
3353 address of cache flush and invalidate by 1.
3355 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3356 Signed-off-by: Stefan Roese <sr@denx.de>
3358 commit 5ca9881aad8c413ac2a82868a5e3719178254502
3359 Author: Peter Pearse <peter.pearse@arm.com>
3360 Date: Fri Nov 9 15:24:26 2007 +0000
3362 Add apollon board support
3363 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3365 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
3366 Author: Stefan Roese <sr@denx.de>
3367 Date: Fri Nov 9 12:19:58 2007 +0100
3369 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
3371 Signed-off-by: Stefan Roese <sr@denx.de>
3373 commit c7f69c340277935a6c19a956421852da944a365f
3374 Author: Stefan Roese <sr@denx.de>
3375 Date: Fri Nov 9 12:18:54 2007 +0100
3377 ppc4xx: Make output a little shorter on I2C bootrom detection
3379 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
3380 already print a line with the information which I2C bootrom is
3381 used for bootstrap configuration. So we don't need this extra line
3382 with "I2C boot EEPROM en-/dis-abled".
3384 This patch also has a little code cleanup integrated.
3386 Signed-off-by: Stefan Roese <sr@denx.de>
3388 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
3389 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3390 Date: Thu Nov 8 12:50:18 2007 -0600
3392 ColdFire: MCF5329 - Remove reset registers from CCM
3394 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3396 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
3397 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3398 Date: Thu Nov 8 12:31:11 2007 -0600
3400 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
3402 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3404 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
3405 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3406 Date: Thu Nov 8 12:19:01 2007 -0600
3408 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
3410 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3412 commit 225a24b5e062ad94627424508ae814f51dbe1a34
3413 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3414 Date: Wed Nov 7 18:00:54 2007 -0600
3416 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
3418 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3420 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
3421 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3422 Date: Wed Nov 7 17:56:15 2007 -0600
3424 ColdFire: MCF532x - Update do_reset() using core reset
3426 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3428 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
3429 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3430 Date: Wed Nov 7 17:51:00 2007 -0600
3432 ColdFire: Update cpu flag for 4.2-xx compiler
3434 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3436 commit 070ba56115b4da63b46e974287fa4550d4023386
3437 Author: York Sun <yorksun@freescale.com>
3438 Date: Wed Oct 31 14:59:04 2007 -0500
3440 8610: Add console frame buffer support to FSL 8610 DIU driver.
3442 Add cfb console support to FSL 8610 DIU driver.
3443 Inspect board version from PIXIS to obtain correct pixel format.
3445 Use #define CONFIG_VIDEO in config file to enable fb console.
3447 To switch monitor, set monitor variable to
3448 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
3449 followed by "diufb init".
3451 Preserve logo bitmap at the top of the fb console.
3453 Signed-off-by: York Sun <yorksun@freescale.com>
3454 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3456 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
3457 Author: York Sun <yorksun@freescale.com>
3458 Date: Mon Oct 29 13:58:39 2007 -0500
3460 8610: Add 8610 DIU display driver
3462 1280x1024 and 1024x768 @ 32 bpp are supported now.
3463 DVI, Single-link LVDS, Double-link LVDS are all supported.
3465 Environmental variable "monitor" is used to specify monitor port.
3467 A new command "diufb" is introduced to reinitialize monitor
3468 and display a BMP file in the memory. So far, 1-bit, 4-bit,
3469 8-bit and 24-bit BMP formats are supported.
3472 - initialize the diu driver
3473 Enable the port specified in the environmental variable "monitor"
3476 - display bmp file in memory.
3477 The bmp image should be no bigger than the resolution, 1280x1024
3478 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
3480 Note, this driver allocate memory but doesn't free it after use
3481 It is written on purpose -- to avoid a failure of reallocation
3482 due to memory fragement.
3484 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
3486 Signed-off-by: York Sun <yorksun@freescale.com>
3487 Signed-off-by: Jon loeliger <jdl@freescale.com>
3489 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
3490 Author: York Sun <yorksun@freescale.com>
3491 Date: Wed Oct 31 10:43:59 2007 -0500
3493 FSL: Add a freescale bitmap logo.
3495 This Freescale logo is a 340 x 128 x 4bpp BMP file
3496 that can be displayed by the DIU Framebuffer driver.
3498 Signed-off-by: York Sun <yorksun@freescale.com>
3499 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3501 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
3502 Author: York Sun <yorksun@freescale.com>
3503 Date: Mon Oct 29 13:57:53 2007 -0500
3505 8610: Make some extra debug environment variables conditional.
3507 One may #define ENV_DEBUG to get them back again.
3509 Signed-off-by: York Sun <yorksun@freescale.com>
3511 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
3512 Author: Jason Jin <Jason.jin@freescale.com>
3513 Date: Mon Oct 29 19:26:21 2007 +0800
3515 8610: Actually enable pixis_reset CONFIGs
3517 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3519 commit f3bceaab230b4748d0afc4109b6837308f018b40
3520 Author: Jason Jin <Jason.jin@freescale.com>
3521 Date: Fri Oct 26 18:31:59 2007 +0800
3523 Fix the BAT definition of PCI IO on 8610 board
3525 The address in the BAT register is aligned with the BAT size.
3526 The original definition actually did not define BAT for PCIE2 IO.
3527 This patch fix this.
3529 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3531 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
3532 Author: Jason Jin <Jason.jin@freescale.com>
3533 Date: Mon Oct 29 19:26:21 2007 +0800
3535 Unify pixis_reset altbank across board families
3537 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
3538 into the separate board config files.
3540 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3541 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3543 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
3544 Author: Jason Jin <Jason.jin@freescale.com>
3545 Date: Fri Oct 26 18:32:00 2007 +0800
3547 make 8610 board use pixis reset
3549 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3551 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
3552 Author: Jon Loeliger <jdl@freescale.com>
3553 Date: Thu Nov 1 12:23:29 2007 -0500
3555 86xx: Fix broken variable reference when #def DEBUGing.
3557 Sometimes you can't reference the DDR2 controller variables.
3559 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3561 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
3562 Author: Roy Zang <tie-fei.zang@freescale.com>
3563 Date: Mon Nov 5 17:39:24 2007 +0800
3565 Implement general ULi 526x Ethernet driver support in U-boot
3567 This patch implements general ULi 526x Ethernet driver.
3568 Until now, it is the only native Ethernet port on
3569 MPC8610HPCD board, but it could be used on other boards
3570 with ULi 526x Ethernet port as well.
3572 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3573 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3574 Acked-by: Jon Loeliger <jdl@freescale.com>
3575 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3577 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
3578 Author: Larry Johnson <lrj@arlinx.com>
3579 Date: Thu Nov 1 08:46:50 2007 -0500
3581 NET: Add Ethernet 1000BASE-X support for PPC4xx
3583 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
3584 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
3585 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
3586 "mii info" command is modified to distinguish between 1000BASE-T and -X.
3588 Signed-off-by: Larry Johnson <lrj@acm.org>
3589 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3591 commit 298035df4948b113d29ac0e694717d34b95bc5dc
3592 Author: Larry Johnson <lrj@arlinx.com>
3593 Date: Wed Oct 31 11:21:29 2007 -0500
3595 NET: Cosmetic changes
3597 Signed-off-by: Larry Johnson <lrj@acm.org>
3598 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3600 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
3601 Author: Stefan Roese <sr@denx.de>
3602 Date: Mon Nov 5 07:43:05 2007 +0100
3604 ppc4xx: Make output a little shorter on PCIe detection
3606 Now not max 3 lines but 2 lines are printed per PCIe port.
3608 Signed-off-by: Stefan Roese <sr@denx.de>
3610 commit 992742a5b09d9040adbd156fb90756af66ade310
3611 Author: Wolfgang Denk <wd@denx.de>
3612 Date: Sat Nov 3 23:09:27 2007 +0100
3614 Cleanup coding style; update CHANGELOG
3616 Signed-off-by: Wolfgang Denk <wd@denx.de>
3618 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
3619 Author: Bruce Adler <bruce.adler@ccpu.com>
3620 Date: Fri Nov 2 13:15:42 2007 -0700
3622 fix wording in README
3624 Changed the wording to properly describe the shadowing
3625 of the environment from ROM to RAM
3627 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
3629 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
3630 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3631 Date: Wed Oct 31 02:18:15 2007 +0900
3633 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
3635 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3637 commit ec22755799466c8a103664bb3a5e647bf9c238f4
3638 Author: Vlad Lungu <vlad@comsys.ro>
3639 Date: Thu Oct 25 16:08:14 2007 +0300
3641 Trimmed some variables in ne2000.c
3643 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
3645 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
3646 Author: Zhang Wei <wei.zhang@freescale.com>
3647 Date: Thu Oct 25 17:51:27 2007 +0800
3649 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
3651 The scan code of the key 'z' is 0x1d, which should be handled.
3653 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
3656 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3658 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
3659 Author: Zhang Wei <wei.zhang@freescale.com>
3660 Date: Thu Oct 25 17:30:04 2007 +0800
3662 Fix USB support issue for MPC8641HPCN board.
3664 The configuration file has already enabled USB, but it
3665 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
3666 on MPC8641HPCN can not work because of the wrong USB
3669 And add the USB command to U-Boot commands list.
3671 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3673 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
3674 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3675 Date: Wed Oct 24 18:16:01 2007 +0200
3677 Use config_cmd_default.h instead of config_cmd_all.h
3679 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3681 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
3682 Author: Marian Balakowicz <m8@semihalf.com>
3683 Date: Wed Oct 24 01:37:36 2007 +0200
3685 TQM5200: Call usb_cpu_init() during board init
3687 usb_cpu_init() configures GPS USB pins, clocks, etc. and
3688 is required for proper operation of kernel USB subsystem.
3689 This setup was previously done in the kernel by the fixup
3690 code which is being removed, thus low level init must be
3693 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3695 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
3696 Author: Guennadi Liakhovetski <lg@denx.de>
3697 Date: Tue Oct 23 16:25:50 2007 +0200
3701 An obvious typo. Originally fixed in linkstation u-boot port.
3703 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3705 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
3706 Author: Guennadi Liakhovetski <lg@denx.de>
3707 Date: Tue Oct 23 14:35:05 2007 +0200
3709 Fix a typo in cpu/mpc824x/interrupts.c
3711 Since December 2003 the timer_interrupt_cpu() function in
3712 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
3713 parameter. Remove it.
3715 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3717 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
3718 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
3719 Date: Wed Oct 17 11:13:51 2007 +0200
3721 add ft_cpu_setup(..) on mpc8260
3723 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
3724 based on code from mpc5xxx
3726 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
3729 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
3730 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
3731 Date: Wed Oct 17 11:18:42 2007 +0200
3733 changes for IDS8247 board support
3735 To get the IDS8247 board working following are done:
3736 - FCC2 is deactivated
3739 - CFI driver is activated
3740 - Adapted for use with LIBFDT
3742 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
3745 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
3746 Author: Stefan Roese <sr@denx.de>
3747 Date: Sat Nov 3 12:08:28 2007 +0100
3749 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
3751 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
3752 Again, only one image supports both targets.
3754 Signed-off-by: Stefan Roese <sr@denx.de>
3756 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
3757 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
3758 Date: Wed Oct 24 15:48:37 2007 +0200
3760 ATSTK1002: Remove default ethernet addresses
3762 Wolfgang is right: It's not a good idea to set up default initial
3763 ethernet addresses for a board, even though they belong to the local
3766 This will change the failure mode from "IT manager screams at you for
3767 using duplicate ethernet addresses" to a nice error message explaining
3768 that the ethernet address hasn't been set properly.
3770 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3772 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
3773 Author: Justin Flammia <jflammia@savantav.com>
3774 Date: Mon Oct 29 17:40:35 2007 -0400
3778 This is a multi-part message in MIME format.
3780 commit e6e505eae94ed721e123e177489291fc4544b7b8
3781 Author: Justin Flammia <jflammia@savantav.com>
3782 Date: Mon Oct 29 17:19:03 2007 -0400
3784 Found a bug in the way the DHCP Request packet is built, where the IP address
3785 that is offered by the server is bound to prematurely. This patch is a fix of
3786 that bug where the IP address offered by the DHCP server is not used until
3787 after the DHCP ACK from the server is received.
3789 Signed-off-by: Justin Flammia <jflammia@savantav.com>
3790 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3792 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
3793 Author: Stefan Roese <sr@denx.de>
3794 Date: Wed Oct 31 20:58:34 2007 +0100
3796 ppc4xx: Fix acadia_nand build problem
3798 Since the cache handling functions were moved from start.S into cache.S
3799 the acadia NAND booting Makfile needs to be adapted accordingly.
3801 Signed-off-by: Stefan Roese <sr@denx.de>
3803 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
3804 Author: Stefan Roese <sr@denx.de>
3805 Date: Wed Oct 31 20:57:11 2007 +0100
3807 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
3809 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
3810 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
3811 boards by defining CONFIG_4xx_DCACHE in the board config file. This
3812 option will disappear, when more boards use is successfully and no
3813 more known problems exist.
3815 This is tested successfully on Sequoia and Katmai. The only problem that
3816 needs to be fixed is, that USB is not working on Sequoia right now, since
3817 it will need some cache handling code too, similar to the 4xx EMAC driver.
3819 Signed-off-by: Stefan Roese <sr@denx.de>
3821 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
3822 Author: Stefan Roese <sr@denx.de>
3823 Date: Wed Oct 31 20:51:10 2007 +0100
3825 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
3827 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
3828 disable the cache for the CPU POST tests, since these tests consist
3829 of self modifying code. This is done via the new change_tlb() function.
3831 Signed-off-by: Stefan Roese <sr@denx.de>
3833 commit f71b2888b4b3c870909a0341427b2a914246f81f
3834 Author: Stefan Roese <sr@denx.de>
3835 Date: Wed Oct 31 20:47:26 2007 +0100
3837 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
3839 This patch enables the 4xx EMAC POST driver to work too, when dcache is
3842 Signed-off-by: Stefan Roese <sr@denx.de>
3844 commit a2685904061b35a17583d65fe47cdc2686a69eaa
3845 Author: Stefan Roese <sr@denx.de>
3846 Date: Wed Oct 31 20:45:53 2007 +0100
3848 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
3850 Signed-off-by: Stefan Roese <sr@denx.de>
3852 commit ff768cb168d8157c24a25016dbfbeb465e47f420
3853 Author: Stefan Roese <sr@denx.de>
3854 Date: Wed Oct 31 18:01:24 2007 +0100
3856 ppc4xx: Change 4xx ethernet driver to handle cached memory too
3858 This patch enables the 4xx EMAC driver to work too, when dcache is
3861 Signed-off-by: Stefan Roese <sr@denx.de>
3863 commit 483e09a223c666269ef81d3573a6591b1046b0ef
3864 Author: Stefan Roese <sr@denx.de>
3865 Date: Wed Oct 31 17:59:22 2007 +0100
3867 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
3869 This function is used to either turn cache on or off in a specific
3872 Signed-off-by: Stefan Roese <sr@denx.de>
3874 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
3875 Author: Stefan Roese <sr@denx.de>
3876 Date: Wed Oct 31 17:57:52 2007 +0100
3878 ppc4xx: Remove cache definition from 4xx board config files
3880 All 4xx board config files don't need the cache definitions anymore.
3881 These are now defined in common headers.
3883 Signed-off-by: Stefan Roese <sr@denx.de>
3885 commit 9b94ac61d2176185c30adf0793e079ec30e68687
3886 Author: Stefan Roese <sr@denx.de>
3887 Date: Wed Oct 31 17:55:58 2007 +0100
3889 ppc4xx: Rework 4xx cache support
3891 New cache handling functions added and all existing functions
3892 moved from start.S into seperate cache.S.
3894 Signed-off-by: Stefan Roese <sr@denx.de>
3896 commit 06713773da4ac3d390c63d82641eb553224b27c2
3897 Author: Stefan Roese <sr@denx.de>
3898 Date: Tue Oct 23 18:03:12 2007 +0200
3900 ppc4xx: Remove compiler warning from previous commit
3902 Signed-off-by: Stefan Roese <sr@denx.de>
3904 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
3905 Author: Stefan Roese <sr@denx.de>
3906 Date: Tue Oct 23 14:40:30 2007 +0200
3908 ppc4xx: Remove temporary TLB entry in POST cache test
3910 Signed-off-by: Stefan Roese <sr@denx.de>
3912 commit 1338e6a81834099ba19733b69aafd8ef5f098094
3913 Author: Stefan Roese <sr@denx.de>
3914 Date: Tue Oct 23 14:05:08 2007 +0200
3916 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
3918 I lately noticed, that newer 4xx board with GBit support sometimes don't
3919 finish link autonegotiation in 4 seconds. Changing this timeout to 5
3920 seconds seems fine here.
3922 Signed-off-by: Stefan Roese <sr@denx.de>
3924 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
3925 Author: Stefan Roese <sr@denx.de>
3926 Date: Tue Oct 23 14:03:17 2007 +0200
3928 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
3930 This patch changes all in32/out32 calls to use the recommended in_be32/
3931 out_be32 macros instead.
3933 Signed-off-by: Stefan Roese <sr@denx.de>
3935 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
3936 Author: Stefan Roese <sr@denx.de>
3937 Date: Thu Oct 25 12:24:59 2007 +0200
3939 ppc4xx: Fix POST ethernet test for Haleakala
3941 The POST ethernet test needed to be changed to dynamically determine
3942 the count of ethernet devices. This code is cloned from the 4xx
3945 Signed-off-by: Stefan Roese <sr@denx.de>
3947 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
3948 Author: Stefan Roese <sr@denx.de>
3949 Date: Tue Oct 23 11:31:05 2007 +0200
3951 ppc4xx: Correct UART input clock calculation and passing to fdt
3953 We now use a value in the gd (global data) structure for the UART input
3954 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
3957 Signed-off-by: Stefan Roese <sr@denx.de>
3959 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
3960 Author: Stefan Roese <sr@denx.de>
3961 Date: Tue Oct 23 10:10:08 2007 +0200
3963 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
3965 The Haleakala is nearly identical with the Kilauea eval board. The only
3966 difference is that the 405EXr only supports one EMAC and one PCIe
3967 interface. This patch adds support for the Haleakala board by using
3968 the identical image for Kilauea and Haleakala. The distinction is done
3969 by comparing the PVR.
3971 Signed-off-by: Stefan Roese <sr@denx.de>
3973 commit 9f798766aa85e62eb8fa8c721e148df609b78137
3974 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
3975 Date: Tue Oct 23 08:29:10 2007 +0200
3977 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
3979 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
3982 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
3983 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
3984 modules are still plugged in. So it is recommended to remove the DIMM
3985 modules while using the NAND booting code with the fixed SDRAM setup!
3987 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
3988 Signed-off-by: Stefan Roese <sr@denx.de>
3990 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
3991 Author: Stefan Roese <sr@denx.de>
3992 Date: Mon Oct 22 16:24:44 2007 +0200
3994 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
3996 Signed-off-by: Stefan Roese <sr@denx.de>
3998 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
3999 Author: Stefan Roese <sr@denx.de>
4000 Date: Mon Oct 22 16:22:40 2007 +0200
4002 ppc4xx: Rework of 4xx serial driver (4)
4006 - Use in_8/out_8 macros instead of in8/out8
4007 - No need for UART_BASE marco anymore, now really handled via function
4009 - serial_init_common() introduced
4010 - Further coding style cleanup
4012 Signed-off-by: Stefan Roese <sr@denx.de>
4014 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
4015 Author: Stefan Roese <sr@denx.de>
4016 Date: Mon Oct 22 15:45:49 2007 +0200
4018 ppc4xx: Rework of 4xx serial driver (3)
4020 Change all linker scripts to reference the changed driver name iop480_uart.o.
4022 Signed-off-by: Stefan Roese <sr@denx.de>
4024 commit 882ae41274921f9016131806bdeb27e19606f47a
4025 Author: Stefan Roese <sr@denx.de>
4026 Date: Mon Oct 22 15:44:39 2007 +0200
4028 ppc4xx: Rework of 4xx serial driver (2)
4030 Change all linker scripts to reference the changed driver name 4xx_uart.o.
4032 Note: In most cased all these explicit referencing of these object files
4033 in the linker scripts is not neccessary. Only for manually embedded
4034 environment into the U-Boot image, which is not done is most cases.
4036 Signed-off-by: Stefan Roese <sr@denx.de>
4038 commit ad31e40bed042cb670d0036fea96435007afb838
4039 Author: Stefan Roese <sr@denx.de>
4040 Date: Mon Oct 22 15:09:59 2007 +0200
4042 ppc4xx: Rework of 4xx serial driver (1)
4044 This patch starts the rework of the PPC4xx serial driver. First we split
4045 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
4046 handling code and the other one iop480_uart.c with the UART code for the
4047 PLX-Tech IOP480 PPC (PPC403 based).
4049 Signed-off-by: Stefan Roese <sr@denx.de>
4051 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
4052 Author: Stefan Roese <sr@denx.de>
4053 Date: Mon Oct 22 10:30:38 2007 +0200
4055 ppc4xx: Correct UART input clock calculation and passing to fdt
4057 Signed-off-by: Stefan Roese <sr@denx.de>
4059 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
4060 Author: Stefan Roese <sr@denx.de>
4061 Date: Mon Oct 22 07:34:34 2007 +0200
4063 ppc4xx: Add initial AMCC Makalu 405EX support
4065 Signed-off-by: Stefan Roese <sr@denx.de>
4067 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
4068 Author: Stefan Roese <sr@denx.de>
4069 Date: Mon Oct 22 07:33:52 2007 +0200
4071 ppc4xx: Add freqUART to CPU speed detection
4073 This value is needed later for the device tree configuration of
4076 Signed-off-by: Stefan Roese <sr@denx.de>
4078 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
4079 Author: Stefan Roese <sr@denx.de>
4080 Date: Sun Oct 21 14:26:29 2007 +0200
4082 ppc: Small Kilauea cleanup of config file
4084 Signed-off-by: Stefan Roese <sr@denx.de>
4086 commit 758c037aeead34b49631b8da3a90b1bba14c0410
4087 Author: Stefan Roese <sr@denx.de>
4088 Date: Sun Oct 21 08:16:12 2007 +0200
4090 rtc: Add Xicor/Intersil X1205 RTC support
4092 This patch adds support for the Xicor/Intersil X1205 RTC used on the
4093 AMCC Makalu eval board. This driver is basically cloned from the Linux
4094 driver version (2.6.23).
4096 This patch also introduces the Linux bcd.h header for the BCD2BIN/
4097 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
4098 should be converted to also use this header instead of implementing
4099 their own local copy of these functions/macros.
4101 Signed-off-by: Stefan Roese <sr@denx.de>
4103 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
4104 Author: Stefan Roese <sr@denx.de>
4105 Date: Sun Oct 21 08:12:41 2007 +0200
4107 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
4109 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
4110 PPC440_SYS_INFO structure into the common ppc4xx.h header.
4112 Lot's of other macros are good candidates to be consolidated this way
4115 Signed-off-by: Stefan Roese <sr@denx.de>
4117 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
4118 Author: Stefan Roese <sr@denx.de>
4119 Date: Sun Oct 21 08:05:18 2007 +0200
4121 ppc4xx: Fix size setup in Kilauea DDR2 init routine
4123 The size was initilized wrong. Instead of 256MB, the DDR2 controller
4124 was setup to 512MB. Now the correct values is used.
4126 This patch also does a little cleanup and adds a comment here.
4128 Signed-off-by: Stefan Roese <sr@denx.de>
4130 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
4131 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
4132 Date: Thu Oct 18 17:29:04 2007 +0200
4134 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
4136 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
4137 number is used to access system registers.
4139 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
4140 Signed-off-by: Stefan Roese <sr@denx.de>
4142 commit c36c68160333ac5fe41ec3db12a728b7075b3912
4143 Author: Stefan Roese <sr@denx.de>
4144 Date: Thu Oct 18 07:42:27 2007 +0200
4146 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
4148 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
4149 is the internal SRAM. Since I now ported and tested this endpoint mode
4150 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
4153 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
4156 Signed-off-by: Stefan Roese <sr@denx.de>
4158 commit 5cb4af4791f61843432155142b6cfac901f66c10
4159 Author: Stefan Roese <sr@denx.de>
4160 Date: Thu Oct 18 07:39:38 2007 +0200
4162 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
4164 This patch adds endpoint support for the AMCC Kilauea eval board. It can
4165 be tested by connecting a reworked PCIe cable (only 1x lane singles
4166 connected) to another root-complex.
4168 In this test setup, a 64MB inbound window is configured at BAR0 which maps
4169 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
4170 access the first 64MB of the SDRAM on the PPC side.
4172 Signed-off-by: Stefan Roese <sr@denx.de>
4174 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
4175 Author: Stefan Roese <sr@denx.de>
4176 Date: Sat Oct 13 16:43:23 2007 +0200
4178 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
4180 This patch adds support for dynamic configuration of PCIe ports for the
4181 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
4182 boards Yucca & Katmai and the 405EX board Kilauea.
4184 This dynamic configuration is done via the "pcie_mode" environement
4185 variable. This variable can be set to "EP" or "RP" for endpoint or
4186 rootpoint mode. Multiple values can be joined via the ":" delimiter.
4191 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
4194 Per default Yucca will be configured as:
4197 Per default Katmai will be configured as:
4200 Per default Kilauea will be configured as:
4203 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
4204 Signed-off-by: Stefan Roese <sr@denx.de>
4206 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
4207 Author: Stefan Roese <sr@denx.de>
4208 Date: Thu Oct 11 11:15:59 2007 +0200
4210 ppc4xx: Enable device tree support (fdt) on Kilauea per default
4212 This patch enables the fdt support on the AMCC Kilauea eval board.
4213 Additionally now EBC ranges fdt fixup is included to support NOR
4214 FLASH mapping via the Linux physmap_of driver.
4216 This Kilauea port now support booting arch/ppc and arch/powerpc
4217 Linux kernels. The default environment "net_nfs" is for arch/ppc
4218 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
4219 support will be removed.
4221 Signed-off-by: Stefan Roese <sr@denx.de>
4223 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
4224 Author: Stefan Roese <sr@denx.de>
4225 Date: Thu Oct 11 11:11:45 2007 +0200
4227 ppc4xx: Add additional debug info to 4xx fdt support
4229 Signed-off-by: Stefan Roese <sr@denx.de>
4231 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
4232 Author: Stefan Roese <sr@denx.de>
4233 Date: Fri Oct 5 21:28:58 2007 +0200
4235 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
4237 Signed-off-by: Stefan Roese <sr@denx.de>
4239 commit 1941cce71b1ae975602854045061e82f94ecd012
4240 Author: Stefan Roese <sr@denx.de>
4241 Date: Fri Oct 5 17:35:10 2007 +0200
4243 ppc4xx: Fix small merge problem in 4xx_enet.c
4245 Signed-off-by: Stefan Roese <sr@denx.de>
4247 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
4248 Author: Stefan Roese <sr@denx.de>
4249 Date: Fri Oct 5 17:11:30 2007 +0200
4251 ppc4xx: Add initial AMCC Kilauea 405EX support
4253 Signed-off-by: Stefan Roese <sr@denx.de>
4255 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
4256 Author: Stefan Roese <sr@denx.de>
4257 Date: Fri Oct 5 17:10:59 2007 +0200
4259 ppc4xx: Add PPC405EX support
4261 Signed-off-by: Stefan Roese <sr@denx.de>
4263 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
4264 Author: Stefan Roese <sr@denx.de>
4265 Date: Fri Oct 5 17:09:36 2007 +0200
4267 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
4269 Signed-off-by: Stefan Roese <sr@denx.de>
4271 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
4272 Author: Stefan Roese <sr@denx.de>
4273 Date: Fri Oct 5 17:07:50 2007 +0200
4275 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
4277 Signed-off-by: Stefan Roese <sr@denx.de>
4279 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
4280 Author: Stefan Roese <sr@denx.de>
4281 Date: Fri Oct 5 17:04:57 2007 +0200
4283 POST: Add 405EX support to 4xx UART POST test
4285 Signed-off-by: Stefan Roese <sr@denx.de>
4287 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
4288 Author: Stefan Roese <sr@denx.de>
4289 Date: Fri Oct 5 15:10:02 2007 +0200
4291 DTT: Prepare DS1775 driver for use of different I2C addresses
4293 Signed-off-by: Stefan Roese <sr@denx.de>
4295 commit 19e93b1e16d267220440d827b920fbad8abfa70f
4296 Author: Stefan Roese <sr@denx.de>
4297 Date: Fri Oct 5 14:23:43 2007 +0200
4299 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
4301 Signed-off-by: Stefan Roese <sr@denx.de>
4303 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
4304 Author: Stefan Roese <sr@denx.de>
4305 Date: Fri Oct 5 09:22:33 2007 +0200
4307 ppc4xx: 4xx_pcie: Disable debug output as default
4309 Signed-off-by: Stefan Roese <sr@denx.de>
4311 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
4312 Author: Stefan Roese <sr@denx.de>
4313 Date: Fri Oct 5 09:18:23 2007 +0200
4315 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
4317 Signed-off-by: Stefan Roese <sr@denx.de>
4319 commit 4dbee8a90df613eb517aadbecebd70f168913d30
4320 Author: Stefan Roese <sr@denx.de>
4321 Date: Fri Oct 5 07:57:20 2007 +0200
4323 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
4325 128MB seems to be the smallest possible value for the memory size
4326 for on PCIe port. With this change now the BAR's of the PCIe cards
4327 are accessible under U-Boot.
4329 One big note: This only works for PCIe port 0 & 1. For port 2 this
4330 currently doesn't work, since the base address is now 0xc0000000
4331 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
4332 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
4333 to change the base addresses completely and this change would have
4334 too much impact right now.
4336 This patch adds debug output to the 4xx pcie driver too.
4338 Signed-off-by: Stefan Roese <sr@denx.de>
4340 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
4341 Author: Stefan Roese <sr@denx.de>
4342 Date: Wed Oct 3 21:16:32 2007 +0200
4344 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
4346 Signed-off-by: Stefan Roese <sr@denx.de>
4348 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
4349 Author: Stefan Roese <sr@denx.de>
4350 Date: Wed Oct 3 15:01:02 2007 +0200
4352 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
4354 These files were introduced with the IBM 405GP but are currently used on all
4355 4xx PPC platforms. So the name doesn't match the content anymore. This patch
4356 renames the files to 4xx_pci.c/h.
4358 Signed-off-by: Stefan Roese <sr@denx.de>
4360 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
4361 Author: Stefan Roese <sr@denx.de>
4362 Date: Wed Oct 3 14:14:58 2007 +0200
4364 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
4366 Signed-off-by: Stefan Roese <sr@denx.de>
4368 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
4369 Author: Stefan Roese <sr@denx.de>
4370 Date: Wed Oct 3 10:38:09 2007 +0200
4372 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
4374 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
4375 the SDR registers of the PCIe ports. This makes the overall design
4376 clearer, since it removed a lot of switch statements which are not
4379 Also, the functions ppc4xx_init_pcie_rootport() and
4380 ppc4xx_init_pcie_entport() are merged into a single function
4381 ppc4xx_init_pcie_port(), since most of the code was duplicated.
4382 This makes maintainance and porting to other 4xx platforms
4385 Signed-off-by: Stefan Roese <sr@denx.de>
4387 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
4388 Author: Stefan Roese <sr@denx.de>
4389 Date: Wed Oct 3 07:48:09 2007 +0200
4391 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
4393 This patch is the first patch of a series to make the 440SPe PCIe code
4394 usable on different 4xx PPC platforms. In preperation for the new 405EX
4395 which is also equipped with PCIe interfaces.
4397 (2) This patch renames the functions from 440spe_ to 4xx_ with a
4398 little additional cleanup
4400 Signed-off-by: Stefan Roese <sr@denx.de>
4402 commit c7c6da23028f146d912514b95aefa3da7cf37699
4403 Author: Stefan Roese <sr@denx.de>
4404 Date: Wed Oct 3 07:34:10 2007 +0200
4406 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
4408 This patch is the first patch of a series to make the 440SPe PCIe code
4409 usable on different 4xx PPC platforms. In preperation for the new 405EX
4410 which is also equipped with PCIe interfaces.
4412 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
4414 Signed-off-by: Stefan Roese <sr@denx.de>
4416 commit 31548249decf18a6b877a18436b6139dd483fe4a
4417 Author: Justin Flammia <jflammia@savantav.com>
4418 Date: Mon Oct 29 17:40:35 2007 -0400
4422 This is a multi-part message in MIME format.
4424 commit e6e505eae94ed721e123e177489291fc4544b7b8
4425 Author: Justin Flammia <jflammia@savantav.com>
4426 Date: Mon Oct 29 17:19:03 2007 -0400
4428 Found a bug in the way the DHCP Request packet is built, where the IP address
4429 that is offered by the server is bound to prematurely. This patch is a fix of
4430 that bug where the IP address offered by the DHCP server is not used until
4431 after the DHCP ACK from the server is received.
4433 Signed-off-by: Justin Flammia <jflammia@savantav.com>
4434 Signed-off-by: Ben Warren <bwarren@qstreams.com>
4436 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
4437 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4438 Date: Thu Oct 25 17:16:22 2007 -0500
4440 ColdFire 54455: Fix correct boot location for atmel and intel
4442 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4444 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
4445 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4446 Date: Thu Oct 25 17:14:00 2007 -0500
4448 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
4450 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4452 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
4453 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4454 Date: Thu Oct 25 17:12:36 2007 -0500
4456 ColdFire 5329: Assign correct SDRAM size and fix cache
4458 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4460 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
4461 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4462 Date: Thu Oct 25 17:10:23 2007 -0500
4464 ColdFire 5253: Assign correct SDRAM size
4466 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4468 commit 2acefa72ee0026f862ab65597ca687428f63a973
4469 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4470 Date: Thu Oct 25 17:09:17 2007 -0500
4472 ColdFire 5282: Fix external flash boot and return dramsize
4474 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4476 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
4477 Author: Bartlomiej Sieka <tur@semihalf.com>
4478 Date: Thu Oct 25 17:20:01 2007 +0200
4480 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
4482 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4484 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
4485 Author: Martin Krause <martin.krause@tqs.de>
4486 Date: Wed Oct 24 08:42:25 2007 +0200
4488 TQM5200: fix spurious characters on second serial interface
4490 With this patch PSC3 is configured as UART. This is done, because if
4491 the pins of PSC3 are not configured at all (-> all pins are GPI),
4492 due to crosstalk, spurious characters may be send over the RX232_2_TXD
4495 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4496 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4498 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
4499 Author: Martin Krause <martin.krause@tqs.de>
4500 Date: Wed Oct 24 08:41:27 2007 +0200
4502 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
4504 Some commands for the STK52xx base board try to access the SM501 grafic
4505 controller. But the TQM5200S has no grafic controller (only the TQM5200
4506 and the TQM5200B have). This patch deactivates the commands accessing
4507 the SM501 for the TQM5200S.
4509 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4510 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4512 commit b31f64343ead9482cd439b1adbe4c34026a641b1
4513 Author: Martin Krause <martin.krause@tqs.de>
4514 Date: Mon Oct 22 16:45:53 2007 +0200
4516 TQM5200: fix spurious characters on second serial interface
4518 With this patch PSC3 is configured as UART. This is done, because if
4519 the pins of PSC3 are not configured at all (-> all pins are GPI),
4520 due to crosstalk, spurious characters may be send over the RX232_2_TXD
4523 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4525 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
4526 Author: Martin Krause <martin.krause@tqs.de>
4527 Date: Mon Oct 22 16:40:06 2007 +0200
4529 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
4531 Some commands for the STK52xx base board try to access the SM501 grafic
4532 controller. But the TQM5200S has no grafic controller (only the TQM5200
4533 and the TQM5200B have). This patch deactivates the commands accessing
4534 the SM501 for the TQM5200S.
4536 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4538 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
4539 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4540 Date: Sun Oct 21 09:14:28 2007 +0200
4542 Mips: Fix string functions differ prototype declaration
4544 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4546 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
4547 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4548 Date: Fri Oct 19 17:51:40 2007 -0500
4550 fsl_pci_init enable COMMAND_MEMORY if inbound window
4552 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
4553 to pciauto_setup_device has the side effect of not getting
4556 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4558 commit e9d0d527992566ebef9826962ff1745b2f082b92
4559 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4560 Date: Fri Oct 19 10:55:24 2007 +0200
4562 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
4564 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4566 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
4567 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4568 Date: Fri Oct 19 08:10:15 2007 +0200
4570 fix warning: no return statement in function returning non-void
4572 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4574 commit e78220f6e514206757acfe247297fc9a328a881f
4575 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4576 Date: Fri Oct 19 06:33:45 2007 +0200
4578 xsengine: Fix no partition type specified, use DOS as default
4580 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4582 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
4583 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4584 Date: Fri Oct 19 00:24:59 2007 +0200
4586 lubbock: Fix no partition type specified, use DOS as default
4588 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4590 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
4591 Author: Wolfgang Denk <wd@denx.de>
4592 Date: Tue Oct 23 16:50:03 2007 +0200
4594 Coding style: keep lists sorted; update CHANGELOG
4596 Signed-off-by: Wolfgang Denk <wd@denx.de>
4598 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
4599 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4600 Date: Fri Oct 19 00:09:05 2007 +0200
4602 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
4604 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4606 commit 96455bfebc9887837095c9051d216f53c61b5f10
4607 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4608 Date: Fri Oct 19 00:07:39 2007 +0200
4610 Fix warning differ in signedness in board/innokom/innokom.c
4612 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4614 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
4615 Author: Marcel Ziswiler <marcel@ziswiler.com>
4616 Date: Fri Oct 19 00:25:33 2007 +0200
4618 fix pxa255_idp board
4620 The pxa255_idp being an old unmaintained board showed several issues:
4621 1. CONFIG_INIT_CRITICAL was still defined.
4622 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
4623 3. Symbol flash_addr was undeclared.
4624 4. The boards lowlevel_init function was still called memsetup.
4625 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
4626 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
4627 'target CPU does not support interworking' warnings on recent compilers.
4628 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
4629 indexes rather than the register definitions from the pxa-regs header
4630 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
4631 avoid any ambiguities.
4632 8. There were several redefinition warnings concerning ICMR, OSMR3,
4633 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
4634 9. The board configuration file was rather outdated.
4635 10. The part header file defined the vendor, product and revision arrays
4636 as unsigned chars instead of just chars in the block_dev_desc_t
4639 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
4641 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
4642 Author: Rune Torgersen <runet@innovsys.com>
4643 Date: Wed Oct 17 11:56:31 2007 -0500
4645 Make MPC8266ADS command selection more robust
4647 Fix MPC8266 command line definition so it won't break when new commands
4648 are added to u-boot.
4649 Signed-off-by Rune Torgersen <runet@innovsys.com>
4651 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
4652 Author: Bartlomiej Sieka <tur@semihalf.com>
4653 Date: Tue Oct 23 13:14:10 2007 +0200
4655 Motion-PRO: Update configuration to accomodate next generation board.
4657 New board has faster oscillator and a different Flash chip. This affects:
4660 - Flash CS configuration (timings)
4661 - Flash sector size, and thus MTD partition layout
4662 - malloc() arena size (due to bigger Flash sectors)
4663 - smaller memory test range (due to bigger malloc() arena)
4665 This patch also enables more extensive memory testing via "mtest".
4667 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4669 commit eff501904df2bf1724a750062628ba2c51dbb1f8
4670 Author: Bartlomiej Sieka <tur@semihalf.com>
4671 Date: Tue Oct 23 11:36:07 2007 +0200
4673 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
4675 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
4676 register must be written a value of 0x00000004 as the first step of the
4677 SDRAM contorller configuration.
4679 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4681 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
4682 Author: Peter Pearse <peter.pearse@arm.com>
4683 Date: Tue Oct 23 10:22:16 2007 +0100
4685 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
4687 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
4688 Author: Stefan Roese <sr@denx.de>
4689 Date: Tue Oct 23 10:17:42 2007 +0200
4691 ppc4xx: lwmon5: Some further GPIO config changes
4693 Signed-off-by: Stefan Roese <sr@denx.de>
4695 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
4696 Author: Vlad Lungu <vlad@comsys.ro>
4697 Date: Sun Oct 21 22:10:10 2007 +0900
4699 [MIPS] Fix UNCACHED_SDRAM
4701 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
4703 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4704 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4706 commit 00101dd7a32d12f698150123e47e4b3420279f86
4707 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4708 Date: Sun Oct 21 21:30:42 2007 +0900
4710 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
4712 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4714 commit eb700636db017d310edaeb559b13d82588560674
4715 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4716 Date: Sun Oct 21 10:55:37 2007 +0900
4718 [MIPS] u-boot.lds: Define _gp in a standard manner
4720 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4722 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
4723 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4724 Date: Sun Oct 21 10:55:36 2007 +0900
4726 [MIPS] Fix $gp usage
4728 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
4729 As a general principle, we should use _gp for $gp.
4731 Thanks to linker script's help we fortunately have _gp which equals to
4732 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
4733 be able to access to GOT entires, global variables and procedure entry
4734 points. The right thing to do is to use _gp.
4736 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
4737 which holds the offset from _gp. When updating GOT entries, we use this
4738 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
4740 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
4741 I made some change to leave over num_got_entries.
4743 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4744 Cc: Vlad Lungu <vlad@comsys.ro>
4746 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
4747 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4748 Date: Sun Oct 21 10:55:36 2007 +0900
4750 [MIPS] u-boot.lds: Fix __got_start and __got_end
4752 Ensure that __got_start points to top of the `.got', and __got_end points
4753 to bottom as well, so that we never fail to count num_got_entries.
4755 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4757 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
4758 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4759 Date: Sun Oct 21 10:55:36 2007 +0900
4761 [MIPS] u-boot.lds: Remove duplicated .sdata section
4763 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4765 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
4766 Author: Wolfgang Denk <wd@denx.de>
4767 Date: Sun Oct 21 01:01:17 2007 +0200
4769 Minor coding style cleanup; update CHANGELOG
4771 Signed-off-by: Wolfgang Denk <wd@denx.de>
4773 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
4774 Author: Vlad Lungu <vlad@comsys.ro>
4775 Date: Thu Oct 4 20:47:10 2007 +0300
4779 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
4780 to do anything in eth_stop() if eth_init() was not called.
4781 Simplified RX path in order to avoid timeouts on really really
4782 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
4783 clever enough to cope with 1 packet per eth_rx().
4785 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4787 commit df90968b48fb34fa9072fab150db2ac89678f537
4788 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
4789 Date: Mon Sep 24 13:32:13 2007 -0400
4791 Setting MSR[DE] in do_reset
4794 This patch ensures the soft reset of the board for the 85xx boards
4795 by setting the MSR[DE] in the do_reset function.
4797 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
4799 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
4800 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
4801 Date: Mon Sep 24 13:36:01 2007 -0400
4806 This patch fixes the MSR overwrite in the start.S when moving out of
4809 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
4811 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
4812 Author: Dan Wilson <dwilson@fulcrummicro.com>
4813 Date: Fri Oct 19 11:33:48 2007 -0500
4815 tsec driver should clear RHALT on startup
4817 This was causing problems for some people.
4819 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
4820 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
4821 Signed-off-by: Andy Fleming <afleming@freescale.com>
4823 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
4824 Author: Kumar Gala <galak@kernel.crashing.org>
4825 Date: Thu Oct 11 00:29:18 2007 -0500
4827 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
4829 On the MPC85xx CDS we have two issues:
4831 1. The device tree fixup code did not check to see if the property we are
4832 trying to update is actually found. Its possible that it would update
4833 random memory starting at 0.
4835 2. Newer Linux kernel's have moved the location of the PCI nodes to be
4836 sibilings of the soc node and not children. The explicit PATH to the PCI
4837 node would not be found for these device trees. Add the ability to handle
4838 both paths. In the future we shouldn't handle such fixups by explicit path.
4840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4842 commit a3063eec775719b7e91023bbec3f64b3118791df
4843 Author: Kumar Gala <galak@kernel.crashing.org>
4844 Date: Thu Oct 11 00:18:48 2007 -0500
4846 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
4848 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
4849 console. Make it so we match that config what we tell Linux as the early
4852 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4854 commit e1ce3cb617bb06f91f82f98915391175addf3e82
4855 Author: Kumar Gala <galak@kernel.crashing.org>
4856 Date: Tue Oct 2 11:12:27 2007 -0500
4858 Remove magic numbers from cache related operations for mpc85xx
4860 The mpc85xx start code uses some magic numbers that we actually
4861 have #defines for in <config.h> so use those instead.
4863 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4865 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
4866 Author: Detlev Zundel <dzu@denx.de>
4867 Date: Fri Oct 19 16:47:26 2007 +0200
4871 Signed-off-by: Detlev Zundel <dzu@denx.de>
4873 commit 281df457c1aa50d2752165d0c5c3282d4027b974
4874 Author: Tony Li <tony.li@freescale.com>
4875 Date: Thu Oct 18 17:47:19 2007 +0800
4877 mpc83xx: Add configure entry for MPC83xx ATM support
4879 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
4882 Signed-off-by: Tony Li <tony.li@freescale.com>
4883 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4885 commit d2646554f529a9577515eceb0ec5eceee18244ba
4886 Author: Tony Li <tony.li@freescale.com>
4887 Date: Thu Oct 18 17:44:38 2007 +0800
4889 mpc83xx: pq-mds-pib.c typo error
4891 Correct to val8 from val.
4893 Signed-off-by: Tony Li <tony.li@freescale.com>
4894 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4896 commit 3e11ae80fec1ee12194940955431186abf6009c2
4897 Author: Stefan Roese <sr@denx.de>
4898 Date: Wed Oct 17 15:40:19 2007 +0200
4900 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
4902 Signed-off-by: Stefan Roese <sr@denx.de>
4904 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
4905 Author: Jon Loeliger <jdl@freescale.com>
4906 Date: Tue Oct 16 15:27:43 2007 -0500
4908 Initial mpc8610hpcd Makefile files.
4910 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4911 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
4912 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4913 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4915 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
4916 Author: Jon Loeliger <jdl@freescale.com>
4917 Date: Tue Oct 16 15:26:51 2007 -0500
4919 Initial mpc8610hpcd cpu/, README and include/ files.
4921 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4922 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
4923 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4924 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4926 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
4927 Author: Jon Loeliger <jdl@freescale.com>
4928 Date: Tue Oct 16 13:54:01 2007 -0500
4930 Initial mpc8610hpcd board files.
4932 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4933 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
4934 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4935 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4937 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
4938 Author: runet@innovsys.com <runet@innovsys.com>
4939 Date: Tue Oct 16 14:50:40 2007 -0500
4941 Make MPC8266ADS board compile again.
4943 Signed-off-by: Runet Torgersen <runet@innovsys.com>
4945 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
4946 Author: Jon Loeliger <jdl@freescale.com>
4947 Date: Mon Aug 27 12:41:03 2007 -0500
4949 86xx: Allow for fewer DDR slots per memory controller.
4951 As a direct correlation exists between DDR DIMM slots
4952 and SPD EEPROM addresses used to configure them, use
4953 the individually defined SPD_EEPROM_ADDRESS* values to
4954 determine if a DDR DIMM slot should have its SPD
4955 configuration read or not.
4957 Effectively, this now allows for 1 or 2 DIMM slots
4958 per memory controller.
4960 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4962 commit 4d4a945e189a2f384c66432316da2788a0ac1607
4963 Author: Rodolfo Giometti <giometti@enneenne.com>
4964 Date: Mon Oct 15 11:59:17 2007 +0200
4966 PXA USB OHCI: "usb stop" implementation.
4968 Some USB keys need to be switched off before loading the kernel
4969 otherwise they can remain in an undefined status which prevents them
4970 to be correctly recognized by the kernel.
4972 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
4974 commit e2e93442e558cf1500e92861f99713b2f045ea22
4975 Author: Stefan Roese <sr@denx.de>
4976 Date: Mon Oct 15 11:39:00 2007 +0200
4978 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
4980 The I2C bootstrap values that can be setup via the "bootstrap" command,
4981 were setup incorrect regarding the generation of the internal sync PCI
4982 clock. The values for PLB clock == 133MHz were slighly incorrect and the
4983 values for PLB clock == 166MHz were totally incorrect. This could
4984 lead to a hangup upon booting while PCI configuration scan.
4986 This patch fixes this issue and configures valid PCI divisor values
4987 for the sync PCI clock, with respect to the provided external async
4990 Here the values of the formula in the chapter 14.2 "PCI clocking"
4991 from the 440EPx users manual:
4993 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
4995 33MHz async PCI frequency:
4997 => 32 <= 44.3 <= 65 (div = 3)
5000 => 32 <= 55.3 <= 65 (div = 3)
5002 66MHz async PCI frequency:
5004 => 65 <= 66.5 <= 132 (div = 2)
5007 => 65 <= 83 <= 132 (div = 2)
5009 Signed-off-by: Stefan Roese <sr@denx.de>
5011 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
5012 Author: Stefan Roese <sr@denx.de>
5013 Date: Mon Oct 15 11:29:33 2007 +0200
5015 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
5017 The BCSR status bit for the 66MHz PCI operation was correctly
5018 addressed (MSB/LSB problem). Now the correct currently setup
5019 PCI frequency is displayed upon bootup.
5021 This patch also fixes this problem on Rainier & Yellowstone, since these
5022 boards use the same souce code as Sequoia & Yosemite do.
5024 Signed-off-by: Stefan Roese <sr@denx.de>
5026 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
5027 Author: Martin Krause <martin.krause@tqs.de>
5028 Date: Wed Sep 26 17:55:56 2007 +0200
5030 TQM860M: adjust for doubled flash sector size.
5032 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
5033 doubled sector size.
5035 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5037 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
5038 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
5039 Date: Wed Sep 26 17:55:54 2007 +0200
5041 TQM8xx: Fix CAN timing.
5043 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5045 commit d43e489baf02afae49077791fb22332d240d8656
5046 Author: Martin Krause <martin.krause@tqs.de>
5047 Date: Thu Sep 27 14:54:36 2007 +0200
5049 TQM866M: fix SDRAM refresh
5051 At 133 MHz the current SDRAM refresh rate is too fast
5052 (measured 4 * 1.17 us).
5053 CFG_MAMR_PTA changes from 39 to 97. This result
5054 in a refresh rate of 4 * 7.8 us at the default clock
5055 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
5056 This is a compromise until a new method is found to
5057 adjust the refresh rate.
5059 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5061 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
5062 Author: Martin Krause <martin.krause@tqs.de>
5063 Date: Wed Sep 26 17:55:55 2007 +0200
5065 TQM866M: adjust for doubled flash sector size.
5067 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
5068 doubled sector size.
5070 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5072 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
5073 Author: Michal Simek <monstr@monstr.eu>
5074 Date: Sun Oct 14 16:12:29 2007 +0200
5076 [FIX] XUPV2P change command handling
5077 and remove code violation
5079 commit 636400198228d96983c06657b17f760f5989958e
5080 Author: Wolfgang Denk <wd@denx.de>
5081 Date: Sun Oct 14 00:13:19 2007 +0200
5083 Prepare for 1.3.0-rc3 release
5085 Signed-off-by: Wolfgang Denk <wd@denx.de>
5087 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
5088 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5089 Date: Sat Sep 29 13:41:37 2007 +0200
5091 Fix warning differ in signedness in cpu/pxa/mmc.c
5093 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5095 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
5096 Author: Wolfgang Denk <wd@denx.de>
5097 Date: Sat Oct 13 23:51:14 2007 +0200
5099 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
5101 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5102 Signed-off-by: Wolfgang Denk <wd@denx.de>
5104 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
5105 Author: Wolfgang Denk <wd@denx.de>
5106 Date: Sat Oct 13 21:15:39 2007 +0200
5108 Coding Style cleanup.
5110 Signed-off-by: Wolfgang Denk <wd@denx.de>
5112 commit e1893815b0999410d7a327589611c7b38e95299e
5113 Author: Wolfgang Denk <wd@denx.de>
5114 Date: Fri Oct 12 15:49:39 2007 +0200
5118 Signed-off-by: Wolfgang Denk <wd@denx.de>
5120 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
5121 Author: Grzegorz Bernacki <gjb@semihalf.com>
5122 Date: Tue Oct 9 13:58:24 2007 +0200
5124 [ads5121] EEPROM support added.
5126 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5128 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
5129 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5130 Date: Sat Oct 6 18:55:35 2007 +0200
5132 AVR32: Initialize bi_flash* in board_init_r
5134 The ATSTK1000-specific flash driver intializes bi_flashstart,
5135 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
5138 Initialize these in board_init_r instead so that things will still be
5139 set up correctly when we switch to the CFI driver.
5141 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5143 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
5144 Author: Marian Balakowicz <m8@semihalf.com>
5145 Date: Fri Oct 5 10:40:54 2007 +0200
5147 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
5149 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5151 commit 92869195ef8210758d2176230c0a36897afd50ed
5152 Author: Bartlomiej Sieka <tur@semihalf.com>
5153 Date: Fri Oct 5 09:46:06 2007 +0200
5155 CM5200: Fix missing null-termination in hostname manipulation code
5157 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5159 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
5160 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5161 Date: Tue Oct 2 19:09:01 2007 +0200
5163 Fix memtest breakage
5165 CFG_MEMTEST_START uses weird magic involving gd, which fails to
5166 compile. Use hardcoded values instead (we actually know how much RAM
5169 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5171 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
5172 Author: Stefan Roese <sr@denx.de>
5173 Date: Tue Oct 2 11:44:46 2007 +0200
5175 ppc4xx: Coding style cleanup
5177 Signed-off-by: Stefan Roese <sr@denx.de>
5179 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
5180 Author: Stefan Roese <sr@denx.de>
5181 Date: Tue Oct 2 11:44:19 2007 +0200
5183 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
5185 Signed-off-by: Stefan Roese <sr@denx.de>
5187 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
5188 Author: Grzegorz Bernacki <gjb@semihalf.com>
5189 Date: Mon Oct 1 09:51:50 2007 +0200
5191 Program EPLD to force full duplex mode for PHY.
5193 EPLD forces modes of PHY operation. By default full duplex is turned off.
5194 This fix turns it on.
5196 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5198 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
5199 Author: Timo Ketola <timo.ketola@exertus.fi>
5200 Date: Mon Sep 24 14:50:32 2007 +0300
5202 Bugfix: Use only one PTD for one endpoint
5204 Original isp116x-hcd code prepared multiple PTDs for longer than 16
5205 byte transfers for one endpoint. That is unnecessary because the
5206 ISP116x is able to split long data from one PTD into multiple
5207 transactions based on the buffer size of the endpoint. It also caused
5208 serious problems if the endpoint NAKed some of the transactions. In
5209 that case ISP116x wouldn't notice that the other PTDs were for the same
5210 endpoint and would try the other PTDs possibly out of order. That would
5211 break the whole transfer.
5213 This patch makes isp116x_submit_job to use one PTD for one transfer.
5215 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
5216 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5218 commit 86ec86c04326c3913178a7679aa910de071da75d
5219 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5220 Date: Thu Sep 27 23:27:47 2007 +0200
5222 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
5224 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5226 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
5227 Author: Stefan Roese <sr@denx.de>
5228 Date: Tue Sep 11 14:12:55 2007 +0200
5230 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
5232 Signed-off-by: Stefan Roese <sr@denx.de>
5234 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
5235 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5236 Date: Wed Sep 26 16:35:54 2007 -0500
5238 85xx io out functions need sync after write.
5240 This fixes the mc146818 rtc_read/write functions for 85xx.
5242 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
5244 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
5245 Author: Grant Likely <grant.likely@secretlab.ca>
5246 Date: Tue Sep 25 15:48:05 2007 -0600
5248 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
5250 CFG_FPGA_XILINX is a bit value used to test against the value in
5251 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
5252 think that is the intention in this code.
5254 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5256 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
5257 Author: Michal Simek <monstr@monstr.eu>
5258 Date: Mon Sep 24 00:41:30 2007 +0200
5260 [FIX] change command handling and removing code violation
5262 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
5263 Author: Michal Simek <monstr@monstr.eu>
5264 Date: Mon Sep 24 00:36:06 2007 +0200
5266 [FIX] change sets of commands
5267 because changing of command handling brings
5268 compilation problems
5270 commit cb1bc63b75a232571eb69aa2c8aa919321655845
5271 Author: Michal Simek <monstr@monstr.eu>
5272 Date: Mon Sep 24 00:30:42 2007 +0200
5274 [FIX] Email reparation & Copyright
5275 Both codes are written by myself without any
5278 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
5279 Author: Michal Simek <monstr@monstr.eu>
5280 Date: Mon Sep 24 00:25:11 2007 +0200
5282 [PATCH] Change macro name for UartLite
5283 because PowerPC 405 can use UartLite as console
5285 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
5286 Author: Michal Simek <monstr@monstr.eu>
5287 Date: Mon Sep 24 00:21:19 2007 +0200
5289 [PATCH] Add support for design without interrupt controller
5292 commit 0731933ec8ec45d02ba89b52df673d526873cdde
5293 Author: Michal Simek <monstr@monstr.eu>
5294 Date: Mon Sep 24 00:19:48 2007 +0200
5296 [FIX] resolve problem with cpu without barrel shifter
5298 commit db14d77995ce515b728b178b63f82babe60e3d56
5299 Author: Michal Simek <monstr@monstr.eu>
5300 Date: Mon Sep 24 00:18:46 2007 +0200
5302 [FIX] repair email address
5304 commit 481d4328618804add1f818a6c96296121cd0528e
5305 Author: Michal Simek <monstr@monstr.eu>
5306 Date: Mon Sep 24 00:17:42 2007 +0200
5308 [FIX] repair MFSL commands
5310 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
5311 Author: Michal Simek <monstr@monstr.eu>
5312 Date: Mon Sep 24 00:08:37 2007 +0200
5314 synchronizition with mainline
5316 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
5317 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5318 Date: Sun Sep 23 02:42:38 2007 +0900
5320 sh: Add support command of ide with sh
5322 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5324 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
5325 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5326 Date: Sun Sep 23 02:38:42 2007 +0900
5330 Add support MS7722SE01 to Makefile.
5332 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5334 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
5335 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5336 Date: Sun Sep 23 02:31:13 2007 +0900
5338 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
5340 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5342 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
5343 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5344 Date: Sun Sep 23 02:19:24 2007 +0900
5346 sh: Update MS7750SE01 platform
5348 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5350 commit 516ad760db3553766267ada01b7d5d727faa4bbd
5351 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5352 Date: Sun Sep 23 02:17:08 2007 +0900
5354 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
5356 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5358 commit b02bad128669e567fce87d8df823b06a0144b8db
5359 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5360 Date: Sun Sep 23 02:12:30 2007 +0900
5362 sh: Update core code of SuperH.
5364 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5366 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
5367 Author: Wolfgang Denk <wd@denx.de>
5368 Date: Thu Sep 20 00:04:14 2007 +0200
5372 Signed-off-by: Wolfgang Denk <wd@denx.de>
5374 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
5375 Author: Wolfgang Denk <wd@denx.de>
5376 Date: Tue Sep 18 21:36:35 2007 +0200
5378 Avoid compiler warning.
5380 Signed-off-by: Wolfgang Denk <wd@denx.de>
5382 commit 8a783a65851bc7421ab69f442261215e21b8891a
5383 Author: Grant Likely <grant.likely@secretlab.ca>
5384 Date: Tue Sep 18 12:24:57 2007 -0600
5386 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
5388 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
5389 nulls in a string differently. For example, the following statement:
5390 echo "this is a string\0" > afile
5391 Will produce the following with /bin/bash:
5392 "this is a string\0"
5393 But with /bin/dash, will produce:
5396 Bug fixed by moving the embedded null out of the makefile and into the
5397 config header. Also renamed the macro to avoid usage colision with the same
5398 macro used by other board ports.
5400 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5402 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
5403 Author: Wolfgang Denk <wd@denx.de>
5404 Date: Tue Sep 18 17:40:27 2007 +0200
5406 MCC200: fix build warning
5408 The MCC200 board config file includes version.h for some customer-
5409 specific setting, which causes warnings with "make depend"; build
5410 version.h before depend.
5412 Signed-off-by: Wolfgang Denk <wd@denx.de>
5414 commit bd86220f58b99d6896198c385fda132f0c980915
5415 Author: Peter Pearse <peter.pearse@arm.com>
5416 Date: Tue Sep 18 13:07:54 2007 +0100
5418 Move coloured led API to status_led.h
5419 Improve indentation in drivers/at45.c
5421 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
5422 Author: Eirik Aanonsen <eaa@wprmedical.com>
5423 Date: Tue Sep 18 08:47:20 2007 +0200
5425 Update atstk1002 bootargs.
5427 Updates to atstk1002 U-Boot header file:
5429 * Set the bootargs for at1002 to point to the SD-card partition instead
5430 * ... of the boot flash.
5431 * Removing the rootfstype since that argument are not needed.
5433 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
5434 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5436 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
5437 Author: Eirik Aanonsen <eaa@wprmedical.com>
5438 Date: Wed Sep 12 13:32:37 2007 +0200
5440 Add some comments to clocks in atstk1002.h
5442 This patch applies some clarifying comments to how the different
5443 clocks are setup according to atstk1002.h Some of the previous
5444 comments where stating wrongful information.
5446 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5448 commit 97213f32416ead885deafea86774e912ffd60ad0
5449 Author: David Saada <David.Saada@ecitele.com>
5450 Date: Mon Sep 17 17:04:47 2007 +0200
5452 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
5454 Signed-off-by: David Saada <david.saada@ecitele.com>
5456 commit 30363e98fa470fbecea5e8bc0f1443352754f303
5457 Author: Stefan Roese <sr@denx.de>
5458 Date: Mon Sep 17 08:20:47 2007 +0200
5460 Small whitespace cleanup of OneNAND patch
5462 Signed-off-by: Stefan Roese <sr@denx.de>
5464 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
5465 Author: Kyungmin Park <kmpark@infradead.org>
5466 Date: Mon Sep 10 17:15:14 2007 +0900
5468 OneNAND support (take #2)
5470 [PATCH 3/3] OneNAND support (take #2)
5472 OneNAND support at U-Boot
5474 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5476 commit 17aa2800457df0c06b41516f46f126712c196219
5477 Author: Kyungmin Park <kmpark@infradead.org>
5478 Date: Mon Sep 10 17:14:34 2007 +0900
5480 OneNAND support (take #2)
5482 [PATCH 2/3] OneNAND support (take #2)
5484 OneNAND support at U-Boot
5486 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5488 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
5489 Author: Kyungmin Park <kmpark@infradead.org>
5490 Date: Mon Sep 10 17:13:49 2007 +0900
5492 OneNAND support (take #2)
5494 [PATCH 1/3] OneNAND support (take #2)
5496 OneNAND support at U-Boot
5498 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5500 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
5501 Author: Michal Simek <monstr@monstr.eu>
5502 Date: Sun Sep 16 20:51:57 2007 +0200
5504 [FIX] remove files form repository
5506 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
5507 Author: Wolfgang Denk <wd@denx.de>
5508 Date: Sun Sep 16 17:10:04 2007 +0200
5510 TQM8xx[LM]: Fix broken environment alignment.
5512 With recent toolchains, the environment sectors were no longer aligned to
5513 sector boundaries. The reason was a combination of two bugs:
5515 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
5516 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
5517 this gets defined, is not included here (and cannot be included
5518 without causing lots of problems).
5520 Added a new #define CFG_USE_PPCENV for all boards which really
5521 want to put the environment is a ".ppcenv" section.
5523 2) The linker scripts just include environment.o, silently assuming
5524 that the objects in that file are really in the order in which
5525 they are coded in the C file, i. e. "environment" first, then
5526 "redundand_environment", and "env_size" last. However, current
5527 toolchains (GCC-4.x) reorder the objects, causing the environment
5528 data not to start on a flash sector boundary:
5532 40008000 T environment 40008000 T env_size
5533 4000c000 T redundand_environment 40008004 T redundand_environment
5534 40010000 T env_size 4000c004 T environment
5536 Note: this patch fixes just the first part, and cures the alignment
5537 problem by making sure that "env_size" gets placed correctly. However,
5538 we still have a potential issue because primary and redundant
5539 environment sectors are actually swapped, i. e. we have now:
5541 40008000 T redundand_environment
5542 4000c000 T environment
5545 This shall be fixed in the next version.
5547 Signed-off-by: Wolfgang Denk <wd@denx.de>
5549 commit eb6da8050797c204c9d010548424186c7ce32fc1
5550 Author: Wolfgang Denk <wd@denx.de>
5551 Date: Sun Sep 16 02:39:35 2007 +0200
5553 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
5555 Signed-off-by: Wolfgang Denk <wd@denx.de>
5557 commit cd2d1602c54cc6957bdef3872272a4b264893960
5558 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
5559 Date: Mon Sep 10 14:54:56 2007 -0400
5563 Fixup for the break statement in wrong place.
5565 [Patch by urwithsughosh@gmail.com]
5566 Acked-by: Andy Fleming <afleming@freescale.com>
5567 Signed-off-by: Wolfgang Denk <wd@denx.de>
5569 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
5570 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5571 Date: Tue Sep 11 17:04:00 2007 +0200
5573 Fix do_div() usage in nand process output
5575 Fix usage of do_div() in nand erase|read|write process output.
5577 The last patch to nand_util.c introduced do_div() instead of libgcc's
5578 implementation. But do_div() returns the quotient in its first
5579 macro parameter and not as result.
5581 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5583 commit c750d2e6692a000a82f29de7bf24e3dc21239161
5584 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5585 Date: Wed Sep 12 12:36:53 2007 +0200
5587 NAND: Add CFG_NAND_QUIET option
5589 This config option sets the default for the progress information
5590 output behavior that can also be configured through the 'quiet'
5591 environment variable.
5593 The legacy NAND code does not print the current progress info
5594 on the console. So this option is for backward compatibility for
5595 units that are in the field and where setting the quiet variable
5596 is not an option. With CFG_NAND_QUIET set to '1' the console
5597 progress info is turned off. This can still be overwritten
5598 through the environment variable.
5600 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5602 commit dcb88630290d2bcd803386dd4c2be73142994c4f
5603 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
5604 Date: Thu Sep 13 16:06:05 2007 -0700
5606 ColdFire: fix build error becasue of bad type of mii_init()
5608 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
5610 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
5611 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
5612 Date: Thu Sep 13 16:04:05 2007 -0700
5614 ColdFire: Fix build error caused by pixis.c
5616 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
5618 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
5620 commit e21659e30660a1377c42af135a6114efe39801d9
5621 Author: Sam Sparks <SSparks@twacs.com>
5622 Date: Fri Sep 14 11:14:42 2007 -0600
5624 Update MPC8349ITX*_config to place config.tmp in right place.
5626 MPC834ITX*_config does not store config.tmp at the correct locatation,
5627 causing MPC8349ITXGP to have the wrong TEXT_BASE.
5629 Signed-off-by: Sam Sparks <SSparks@twacs.com>
5630 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5632 commit 1218abf1b5817a39a82399b4b928b00750575bda
5633 Author: Wolfgang Denk <wd@denx.de>
5634 Date: Sat Sep 15 20:48:41 2007 +0200
5636 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
5638 Signed-off-by: Wolfgang Denk <wd@denx.de>
5640 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
5641 Author: Dirk Behme <dirk.behme@googlemail.com>
5642 Date: Sat Sep 15 11:55:42 2007 +0200
5644 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
5646 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
5649 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
5651 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
5653 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
5654 Author: Michal Simek <monstr@monstr.eu>
5655 Date: Sat Sep 15 00:03:35 2007 +0200
5657 Synchronize with U-BOOT mainline
5659 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
5660 Author: Sam Sparks <SSparks@twacs.com>
5661 Date: Fri Sep 14 11:14:42 2007 -0600
5663 Update MPC8349ITX*_config to place config.tmp in right place.
5665 MPC834ITX*_config does not store config.tmp at the correct locatation,
5666 causing MPC8349ITXGP to have the wrong TEXT_BASE.
5668 Signed-off-by: Sam Sparks <SSparks@twacs.com>
5669 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5670 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5672 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
5673 Author: Bartlomiej Sieka <tur@semihalf.com>
5674 Date: Thu Sep 13 18:21:48 2007 +0200
5676 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
5678 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5680 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
5681 Author: Bartlomiej Sieka <tur@semihalf.com>
5682 Date: Thu Sep 13 16:33:59 2007 +0200
5684 tqm5200: Restore customary env. variable boot commands for powerpc kernels
5686 - update default definitions of kernel_addr and fdt_addr env. variables
5687 - make arch/powerpc booting the default scenario
5688 - update MTD partition layout to match the above
5690 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5692 commit f34024d4a328e6edd906456da98d2c537155c4f7
5693 Author: Wolfgang Denk <wd@denx.de>
5694 Date: Wed Sep 12 00:48:57 2007 +0200
5696 Fix memory corruption problem on STX GP3 SSA Board.
5698 Signed-off-by: Wolfgang Denk <wd@denx.de>
5700 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
5701 Author: Peter Pearse <peter.pearse@arm.com>
5702 Date: Tue Sep 11 15:35:01 2007 +0100
5706 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
5707 Author: Grzegorz Bernacki <gjb@semihalf.com>
5708 Date: Tue Sep 11 15:42:11 2007 +0200
5710 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
5711 scan on second pci bus.
5713 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5715 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
5716 Author: Grzegorz Bernacki <gjb@semihalf.com>
5717 Date: Tue Sep 11 12:57:52 2007 +0200
5719 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
5721 Bamboo has a file sdram.c which needs special treatment when building in
5722 separate directory. It has to be linked to build directory otherwise it is
5725 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5727 commit d45963854eff39d575124d859419bb4953ce2c87
5728 Author: Michal Simek <monstr@monstr.eu>
5729 Date: Tue Sep 11 00:37:04 2007 +0200
5731 [FIX] Microblaze ML401 - repare FLASH handling
5733 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
5734 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
5735 Date: Mon Sep 10 16:55:59 2007 +0100
5737 Allocate CPU Architecture Code for STMicroelectronics' ST200.
5739 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
5740 ---------------------------------------------------
5742 commit 754bac48156f8958d8f6a53a51eda88ab5758929
5743 Author: Wolfgang Denk <wd@denx.de>
5744 Date: Mon Sep 10 20:42:31 2007 +0200
5746 Update version to match current state.
5748 Signed-off-by: Wolfgang Denk <wd@denx.de>
5750 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
5751 Author: Grzegorz Bernacki <gjb@semihalf.com>
5752 Date: Mon Sep 10 17:39:08 2007 +0200
5754 [MPC512x] Streamline frame handling in the FEC driver
5756 - convert frame size settings to be derived from a single base
5757 - set frame size to the recommended default value
5759 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5761 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
5762 Author: Kyungmin Park <kmpark@infradead.org>
5763 Date: Mon Sep 10 11:34:00 2007 +0900
5765 Remove compiler warning: target CPU does not support interworking
5767 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5769 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
5770 Author: Wolfgang Denk <wd@denx.de>
5771 Date: Sun Sep 9 21:21:33 2007 +0200
5773 Fix compile error in spc1920 config.
5775 Signed-off-by: Markus Klotzbücher <mk@denx.de>
5776 Signed-off-by: Wolfgang Denk <wd@denx.de>
5778 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
5779 Author: Grant Likely <grant.likely@secretlab.ca>
5780 Date: Fri Sep 7 09:25:07 2007 -0600
5782 Bugfix: make bootm+libfdt compile on boards with no flash
5784 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5786 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
5787 Author: Grzegorz Bernacki <gjb@semihalf.com>
5788 Date: Fri Sep 7 18:35:37 2007 +0200
5790 [PPC440SPe] PCIe environment settings for Katmai and Yucca
5792 - 'pciconfighost' is set by default in order to be able to scan bridges
5793 behind the primary host/PCIe
5795 - 'pciscandelay' env variable is recognized to allow for user-controlled
5796 delay before the PCIe bus enumeration; some peripheral devices require a
5797 significant delay before they can be scanned (e.g. LSI8408E); without the
5798 delay they are not detected
5800 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5802 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
5803 Author: Grzegorz Bernacki <gjb@semihalf.com>
5804 Date: Fri Sep 7 18:20:23 2007 +0200
5806 [PPC440SPe] Improve PCIe configuration space access
5808 - correct configuration space mapping
5809 - correct bus numbering
5810 - better access to config space
5812 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
5813 first device on the first bus. We now allow to configure up to 16 buses;
5814 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
5815 peripheral devices farther in hierarchy can be identified.
5817 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5819 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
5820 Author: Grzegorz Bernacki <gjb@semihalf.com>
5821 Date: Fri Sep 7 17:46:18 2007 +0200
5823 [PPC440SPe] Convert machine check exceptions handling
5825 Convert using fixup mechanism to suppressing MCK for the duration of config
5826 read/write transaction: while fixups work fine with the case of a precise
5827 exception, we identified a major drawback with this approach when there's
5828 an imprecise case. In this scenario there is the following race condition:
5829 the fixup is (by design) set to catch the instruction following the one
5830 actually causing the exception; if an interrupt (e.g. decrementer) happens
5831 between those two instructions, the ISR code is executed before the fixup
5832 handler the machine check is no longer protected by the fixup handler as it
5833 appears as within the ISR code. In consequence the fixup approach is being
5834 phased out and replaced with explicit suppressing of MCK during a PCIe
5835 config read/write cycle.
5837 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5839 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
5840 Author: Wolfgang Denk <wd@denx.de>
5841 Date: Fri Sep 7 17:43:36 2007 +0200
5843 Fix typo in MAKEALL script.
5845 Signed-off-by: Wolfgang Denk <wd@denx.de>
5847 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
5848 Author: Grzegorz Bernacki <gjb@semihalf.com>
5849 Date: Fri Sep 7 17:09:21 2007 +0200
5851 [MPC512x] Proper handling of larger frames in the FEC driver
5853 When frame larger than local RX buffer is received, it is split and handled
5854 by two buffer descriptors. Prior to this patch the FEC driver discarded
5855 contents of a buffer descriptor without the 'LAST' bit set, so the first
5856 part of the frame was lost in case of larger frames. This fix allows to
5857 safely combine the two pieces into the whole frame.
5859 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
5861 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
5862 Author: Rafal Jaworowski <raj@semihalf.com>
5863 Date: Fri Sep 7 17:05:36 2007 +0200
5865 [MPC512x] Correct fixup relocation
5867 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5869 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
5870 Author: Wolfgang Denk <wd@denx.de>
5871 Date: Fri Sep 7 01:21:25 2007 +0200
5873 Update CHANGELOG, minor coding style cleanup.
5875 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
5876 Author: stefano babic <sbabic@denx.de>
5877 Date: Thu Aug 30 23:01:49 2007 +0200
5879 PXA270: Added support for TrizepsIV board.
5881 This patch add support for the Trizeps IV module (520Mhz).
5883 Signed-off-by: Stefano Babic <sbabic@denx.de>
5885 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
5886 Author: stefano babic <sbabic@denx.de>
5887 Date: Thu Aug 30 22:57:04 2007 +0200
5889 PXA270: Add support for multiple serial ports.
5891 This patch adds support for multiple serial ports to the PXA target.
5892 FFUART, BTUART and STUART are supported.
5894 Signed-off-by: Stefano Babic <sbabic@denx.de>
5896 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
5897 Author: stefano babic <sbabic@denx.de>
5898 Date: Thu Aug 30 22:48:47 2007 +0200
5900 PXA270: fix compile issue (invalid lvalue)
5902 Code is broken for PXA270 due to "invalid lvalue in assignment".
5904 This patch fix it in pxa-regs.h
5906 Signed-off-by: Stefano Babic <sbabic@denx.de>
5908 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
5909 Author: Jason Jin <Jason.jin@freescale.com>
5910 Date: Thu Aug 30 18:19:05 2007 +0800
5912 Add BUILD_DIR support for bios emulator.
5914 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
5916 commit b4d8a55145442f136982634862341a3e02002bda
5917 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5918 Date: Fri Aug 31 14:41:51 2007 +0900
5920 [MIPS] Remove inline asm string functions
5922 Stop using inline string functions on MIPS as other ARCHs do so,
5923 since the optimized inline asm versions are not small.
5925 This change is triggered by a following MIPS build error:
5926 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
5927 common/exports.c:32: undefined reference to `strcmp'
5928 make: *** [u-boot] Error 1
5930 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5932 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
5933 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5934 Date: Fri Aug 31 14:41:45 2007 +0900
5936 [MIPS] Update asm string header
5938 This patches contains several bugfixes and cleanups in the latest upstream:
5940 - Don't include linux/config.h
5941 - Remove buggy inline version of memscan.
5942 - Merge with Linux 2.6.11-rc3.
5943 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
5944 - Goodbye mips64. 31704 lines of code bite the dust.
5945 - Replace extern inline with static inline.
5946 - Fix return value of strncpy.
5947 - Remove a bunch more "$1" clobbers.
5949 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5951 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
5952 Author: Bartlomiej Sieka <tur@semihalf.com>
5953 Date: Tue Sep 4 17:31:22 2007 +0200
5955 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
5957 Fix incorrect blob address calculation in do_bootm_linux() that prevents
5958 booting the kernel from a multi-file image (kernel + initrd + blob).
5960 Also, make minor updates to the U-Boot's output and to the coding style.
5962 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5964 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
5965 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
5966 Date: Fri Aug 31 14:29:04 2007 +0200
5968 Add support for Sil680 IDE controller.
5970 o add drivers/sil680.c to support the Sil680 IDE-controller.
5971 o drivers/Makefile: add sil680.o.
5973 Signed-off-by: Gary Jennejohn <garyj@denx.de>
5975 commit e79021223bc339df655e360645a52c457a74b067
5976 Author: Grant Likely <grant.likely@secretlab.ca>
5977 Date: Thu Sep 6 09:47:40 2007 -0600
5979 bootm/fdt: Only process the fdt if an fdt address was provided
5981 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
5982 kernels using the board info structure (instead of passing a device tree)
5983 This change allows the old style booting to be used if the fdt argument
5984 was not passed to 'bootm'.
5986 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5987 Acked-by: Kim Phillips <kim.phillips@freescale.com>
5989 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
5990 Author: Grant Likely <grant.likely@secretlab.ca>
5991 Date: Thu Sep 6 09:46:23 2007 -0600
5993 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
5995 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
5997 Tested on: lite5200b
5999 Note: the fixup functions have not been moved to a common place. This
6000 patch is targeted for immediate merging as in solves a build issue, but
6001 the final name/location of the fixups is still subject to debate. I
6002 propose to merge this now, and move the fixups in the next merge window
6003 to be usable by all targets.
6005 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6007 commit 41bb76e941929f54a73206fb132f7a4c275543a3
6008 Author: Grant Likely <grant.likely@secretlab.ca>
6009 Date: Thu Sep 6 09:46:17 2007 -0600
6011 libfdt: add convenience function fdt_find_and_setprop()
6013 Given the path to a node, fdt_find_and_setprop() allows a property value
6016 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6018 commit 80767a6cead9990d9e77e62be947843c2c72f469
6019 Author: Peter Pearse <peter.pearse@arm.com>
6020 Date: Wed Sep 5 16:04:41 2007 +0100
6022 Changed API name to coloured_led.h
6023 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
6024 Tidied other cpu/arm920t/start.S code
6026 commit 56a9270521baaa00e12639a978302a67f61ef060
6027 Author: Kumar Gala <galak@kernel.crashing.org>
6028 Date: Thu Aug 30 16:18:18 2007 -0500
6030 Fix ULI RTC support on MPC8544 DS
6032 The RTC on the M1575 ULI chipset requires a dummy read before
6033 we are able to talk to the RTC. We accomplish this by adding a
6034 second memory region to the PHB the ULI is on and read from it.
6036 The second region is added to maintain compatiabilty with Linux's
6037 view of the PCI memory map.
6039 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6041 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
6042 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6043 Date: Thu Aug 30 01:58:48 2007 -0500
6045 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
6047 pcie is now differentiated from pci. Add 8641 bus-range updates.
6049 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6051 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
6052 Author: Peter Pearse <peter.pearse@arm.com>
6053 Date: Tue Sep 4 16:18:38 2007 +0100
6055 Add coloured led interface for ARM boards.
6056 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
6058 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
6059 Author: Peter Pearse <peter.pearse@arm.com>
6060 Date: Tue Sep 4 14:49:28 2007 +0100
6062 Move include/led.h to board/at91rm9200dk
6064 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
6065 Author: Peter Pearse <peter.pearse@arm.com>
6066 Date: Tue Sep 4 14:25:51 2007 +0100
6068 Ran Lindent on drivers/at45.c
6070 commit 557ab89d294f08dd532f21d19861b40093200a33
6071 Author: Peter Pearse <peter.pearse@arm.com>
6072 Date: Tue Sep 4 14:23:50 2007 +0100
6074 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
6076 commit 81b73dec16fd1227369a191e725e10044a9d56b8
6077 Author: Gary Jennejohn <garyj@denx.de>
6078 Date: Fri Aug 31 15:21:46 2007 +0200
6080 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
6082 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
6083 set to non-zero, because it doesn't support MRM (memory-read-
6084 multiple) correctly. We now added the possibility to configure
6085 this register in the board config file, so that the default value
6086 of 8 can be overridden.
6088 Here the details of this patch:
6090 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
6091 board-specific settings. As an example the sequoia board requires 0.
6092 Idea from Stefan Roese <sr@denx.de>.
6093 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
6094 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
6095 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
6096 CFG_PCI_CACHE_LINE_SIZE to 0.
6098 Signed-off-by: Gary Jennejohn <garyj@denx.de>
6099 Signed-off-by: Stefan Roese <sr@denx.de>
6101 commit 60174746c668b309378a91488dded898e9553eae
6102 Author: Wolfgang Denk <wd@denx.de>
6103 Date: Fri Aug 31 10:01:51 2007 +0200
6105 Fix TFTP OACK code for short packets.
6107 The old code had a loop limit overflow bug which caused a semi-
6108 infinite loop for small packets, because in "i<len-8", "i" was signed,
6109 but "len" was unsigned, and "len-8" became a huge number for small
6112 This is a workaround which replaces broken commit 8f1bc284.
6114 Signed-off-by: Wolfgang Denk <wd@denx.de>
6116 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
6117 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
6118 Date: Thu Aug 30 15:03:05 2007 +0200
6120 Reduce BOOTDELAY variable to 1 second by default for STK1002
6122 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
6123 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6125 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
6126 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
6127 Date: Thu Aug 30 15:03:04 2007 +0200
6129 Remove double quotation marks around MAC address for STK1002
6131 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
6132 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6134 commit ff13ac8c7bbebb238e339592de765c546dba1073
6135 Author: Wolfgang Denk <wd@denx.de>
6136 Date: Thu Aug 30 14:42:15 2007 +0200
6138 Backout commit 8f1bc284 as it causes TFTP to fail.
6140 Signed-off-by: Wolfgang Denk <wd@denx.de>
6142 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
6143 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6144 Date: Thu Aug 30 02:26:17 2007 -0500
6146 Revert "Fix MPC8544DS PCIe3 scsi."
6148 This reverts commit 9468e680.
6149 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
6151 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6153 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
6154 Author: Grant Likely <grant.likely@secretlab.ca>
6155 Date: Wed Aug 29 18:26:24 2007 -0600
6157 tftp: don't implicity trust the format of recevied packets
6159 The TFTP OACK code trusts that the incoming packet is formated as
6160 ASCII text and can be processed by string functions. It also has a
6161 loop limit overflow bug where if the packet length is less than 8, it
6162 ends up looping over *all* of memory to find the 'blksize' string.
6164 This patch solves the problem by forcing the packet to be null
6165 terminated and using strstr() to search for the sub string.
6167 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6169 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
6170 Author: Stefan Roese <sr@denx.de>
6171 Date: Wed Aug 29 16:31:18 2007 +0200
6173 ppc4xx: Change lwmon5 default environment to support Linux RTC
6175 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
6176 to supply the RTC I2C address as bootline parameter. This patch
6177 adds support for this rtc probing parameter to the bootargs:
6179 "rtc-pcf8563.probe=0,0x51"
6181 Signed-off-by: Stefan Roese <sr@denx.de>
6183 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
6184 Author: Kim Phillips <kim.phillips@freescale.com>
6185 Date: Wed Aug 29 09:06:05 2007 -0500
6187 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
6189 this had slipped through the cracks, since the sbc board was added
6190 after I wrote the original patch to remove all these symbols, and
6191 before it was merged.
6193 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6195 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
6196 Author: Wolfgang Denk <wd@denx.de>
6197 Date: Wed Aug 29 14:05:30 2007 +0200
6199 Add mii_init() prototype
6201 to get rid of a *lot* of compiler warnings.
6203 Signed-off-by: Wolfgang Denk <wd@denx.de>
6205 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
6206 Author: Wolfgang Denk <wd@denx.de>
6207 Date: Wed Aug 29 13:35:03 2007 +0200
6209 Disable network support on cmi_mpc5xx board
6211 ..because it caused compiler errors and there seems to be no
6212 board maintainer to take care of this.
6214 Signed-off-by: Wolfgang Denk <wd@denx.de>
6216 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
6217 Author: Kumar Gala <galak@kernel.crashing.org>
6218 Date: Mon Aug 20 09:44:00 2007 -0500
6220 Fix MPC8544DS PCIe3 scsi.
6222 <ed.swarthout@freescale.com>
6224 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
6225 is allocating memory space it doesn't need.
6227 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
6228 Signed-off-by: Andy Fleming <afleming@freescale.com>
6230 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
6231 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6232 Date: Tue Aug 21 09:38:59 2007 -0500
6236 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
6237 correct consoledev needed for linux boot.
6238 Standardize on fdt{file,addr} var to hold dtb file name.
6240 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
6242 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6244 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
6245 Author: Haiying Wang <Haiying.Wang@freescale.com>
6246 Date: Thu Aug 23 15:20:54 2007 -0400
6248 Enable L2 cache for MPC8568MDS board
6250 The L2 cache size is 512KB for 8568, print out the correct informaiton.
6252 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6254 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
6255 Author: Jason Jin <Jason.jin@freescale.com>
6256 Date: Wed Aug 22 17:54:49 2007 +0800
6258 Remove the bios emulator binary files from MAI board
6260 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6262 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
6263 Author: Kim Phillips <kim.phillips@freescale.com>
6264 Date: Tue Aug 21 17:00:17 2007 -0500
6266 support board vendor-common makefiles
6268 if a board/$(VENDOR)/common/Makefile exists, build it.
6270 also add the first such case, board/freescale/common/Makefile, to
6271 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
6272 dictated by board configuration.
6274 thusly get rid of alternate build dir errors such as:
6276 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
6278 by putting the common/ mkdir command in its proper place (the common
6279 Makefile). Common bits from existing individual board Makefiles have
6282 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6284 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
6285 Author: stefano babic <sbabic@denx.de>
6286 Date: Tue Aug 21 15:52:33 2007 +0200
6288 Fix: TFTP is not working on little endian systems
6290 TFTP does not work anymore after multicast tftp
6291 patch was applied on little endian systems.
6294 Signed-off-by: Stefano Babic <sbabic@denx.de>
6296 commit 5f470948570526e9186f053a3003da7719604e90
6297 Author: stefano babic <sbabic@denx.de>
6298 Date: Tue Aug 21 15:50:33 2007 +0200
6300 Fix MAC address setting in DM9000 driver.
6302 The logic to check if there is a correct MAC address in the DM9000
6303 EEPROM, added in the last patch, is wrong. Now the MAC address is
6304 always taken from the environment, even if a suitable MAC is present
6307 Signed-off-by: Stefano Babic <sbabic@denx.de>
6309 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
6310 Author: Martin Krause <martin.krause@tqs.de>
6311 Date: Tue Aug 21 12:40:34 2007 +0200
6313 MPC5xxx: fix some compiler warnings in USB code
6315 Fix the following warnings:
6316 - usb.c:xx: warning: function declaration isn't a prototype
6317 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
6318 from pointer wihtout a cast
6320 Signed-off-by: Martin Krause <martin.krase@tqs.de>
6322 commit 16e23c3f5dab6937f5109365416808c7f15c122b
6323 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6324 Date: Mon Aug 20 23:55:33 2007 -0500
6326 fsl_pci_init - Remove self PCSRBAR allocation
6328 CPU physical address space was being wasted by allocating a
6329 PCSRBAR PCI inbound region to it's memory space.
6331 As a rule, PCSRBAR should be left alone since it does not affect
6332 transactions from self and other masters may have changed it.
6334 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
6336 commit 0e700ce03a23bb1921149bc77008ace7103d5289
6337 Author: Martin Krause <martin.krause@tqs.de>
6338 Date: Mon Aug 20 13:56:47 2007 +0200
6340 Fix compiler warning in include/s3c2410.h
6342 This patch fixes the "type qualifiers ignored on fuction return tpye"
6343 warning for include/s3c2410.h
6345 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6347 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
6348 Author: Dirk Behme <dirk.behme@googlemail.com>
6349 Date: Mon Aug 20 07:09:05 2007 +0200
6351 Fix compilation error for omap2420h4_config.
6353 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
6354 and flash_probe() calls in env_flash.c.
6356 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
6358 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
6359 Author: Kim Phillips <kim.phillips@freescale.com>
6360 Date: Fri Aug 10 14:34:14 2007 -0500
6362 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
6364 and make some minor corrections to the FDT part of the README.
6366 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6368 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
6369 Author: Wolfgang Denk <wd@denx.de>
6370 Date: Wed Aug 29 01:32:05 2007 +0200
6372 Minor coding style cleanup.
6374 Signed-off-by: Wolfgang Denk <wd@denx.de>
6376 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
6377 Author: Heiko Schocher <hs@pollux.denx.de>
6378 Date: Tue Aug 28 17:40:33 2007 +0200
6380 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
6382 Signed-off-by: Heiko Schocher <hs@denx.de>
6384 commit f98984cb194bb34dbe1db9429d3b51133af30d07
6385 Author: Heiko Schocher <hs@pollux.denx.de>
6386 Date: Tue Aug 28 17:39:14 2007 +0200
6388 IDE: - make ide_inb () and ide_outb () "weak", so boards can
6389 define there own I/O functions.
6390 (Needed for the pcs440ep board).
6391 - The default I/O Functions are again 8 Bit accesses.
6392 - Added CONFIG_CMD_IDE for the pcs440ep Board.
6394 Signed-off-by: Heiko Schocher <hs@denx.de>
6396 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
6397 Author: Semih Hazar <semih.hazar@indefia.com>
6398 Date: Mon Aug 20 19:00:01 2007 +0300
6400 AVR32: Change prototype of memset
6402 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
6403 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6405 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
6406 Author: Yuri Tikhonov <yur@emcraft.com>
6407 Date: Sat Aug 25 05:07:16 2007 +0200
6409 POST: limit memory test area to not touch global data anymore
6411 As experienced on lwmon5, on some boards the POST memory test can
6412 corrupt the global data buffer (bd). This patch fixes this issue
6413 by checking and limiting this area.
6415 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
6416 Signed-off-by: Stefan Roese <sr@denx.de>
6418 commit 75e1a84d483e36be10e206e539b028c4889e1158
6419 Author: Stefan Roese <sr@denx.de>
6420 Date: Fri Aug 24 15:41:42 2007 +0200
6422 ppc4xx: Add RTC POST test to lwmon5 board configuration
6424 Since this RTC POST test is taking quite a while to complete
6425 it's only initiated upon special keypress same as the complete
6428 Signed-off-by: Stefan Roese <sr@denx.de>
6430 commit d7bfa620037a6d2210159387571bdf93aa32c162
6431 Author: Stefan Roese <sr@denx.de>
6432 Date: Fri Aug 24 15:19:10 2007 +0200
6434 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
6436 Signed-off-by: Stefan Roese <sr@denx.de>
6438 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
6439 Author: Stefan Roese <sr@denx.de>
6440 Date: Thu Aug 23 11:02:37 2007 +0200
6442 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
6444 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
6445 board. Now the "eeprom" command can be used to read/write from/to this
6446 device. Additionally a new command was added "eepromwp" to en-/disable
6447 the write-protect of this 2nd EEPROM.
6449 The 1st EEPROM is not affected by this write-protect command.
6451 Signed-off-by: Stefan Roese <sr@denx.de>
6453 commit c64fb30e4c5976007d56fc1789c7a0666082b536
6454 Author: Stefan Roese <sr@denx.de>
6455 Date: Wed Aug 22 08:56:09 2007 +0200
6457 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
6459 Signed-off-by: Stefan Roese <sr@denx.de>
6461 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
6462 Author: Stefan Roese <sr@denx.de>
6463 Date: Tue Aug 21 16:27:57 2007 +0200
6465 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
6467 This patch adds support for the matrix keyboard on the lwmon5 board.
6468 Since the implementation in the dsPCI is kind of compatible with the
6469 "old" lwmon board, most of the code is copied from the lwmon
6472 Signed-off-by: Stefan Roese <sr@denx.de>
6474 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
6475 Author: Wolfgang Denk <wd@denx.de>
6476 Date: Sun Aug 19 10:27:34 2007 +0200
6478 Fix some build errors.
6480 Signed-off-by: Wolfgang Denk <wd@denx.de>
6482 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
6483 Author: Wolfgang Denk <wd@denx.de>
6484 Date: Sat Aug 18 22:00:38 2007 +0200
6488 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
6489 Author: Kim Phillips <kim.phillips@freescale.com>
6490 Date: Thu Aug 16 22:52:39 2007 -0500
6492 lib_ppc: make board_add_ram_info weak
6494 platforms wishing to display RAM diagnostics in addition to size,
6495 can do so, on one line, in their own board_add_ram_info()
6498 this consequently eliminates CONFIG_ADD_RAM_INFO.
6500 Thanks to Stefan for the hint.
6502 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6504 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
6505 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6506 Date: Fri Aug 17 12:43:44 2007 +0900
6508 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
6510 This patch has been sent on:
6513 Many users of PCI config read routines tend to ignore the function
6514 ret value, and are only concerned about the contents of *val. Based
6515 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
6516 the *val on dword read error.
6518 Without this fix, for example, we'll go on scanning bus with vendor or
6519 header_type uninitialized. This brings many unnecessary config trials.
6521 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6523 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
6524 Author: Stefan Roese <sr@denx.de>
6525 Date: Sat Aug 18 14:37:52 2007 +0200
6527 ColdFire: Fix some remaining problems with CFG_CMD_
6529 Signed-off-by: Stefan Roese <sr@denx.de>
6531 commit 8280f6a1c43247616b68224675188e5ccd124650
6532 Author: Stefan Roese <sr@denx.de>
6533 Date: Sat Aug 18 14:33:02 2007 +0200
6535 Coding style cleanup
6537 Signed-off-by: Stefan Roese <sr@denx.de>
6539 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
6540 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6541 Date: Thu Aug 16 19:23:50 2007 -0500
6543 ColdFire: Add M5235EVB Platform for MCF523x
6545 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6547 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
6548 Author: Kim Phillips <kim.phillips@freescale.com>
6549 Date: Fri Aug 17 09:30:00 2007 -0500
6551 mpc83xx: fix typo in DDR2 programming
6553 introduced in the implement board_add_ram_info patch as I was cleaning out the
6554 magic numbers. sorry.
6556 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6558 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
6559 Author: Kim Phillips <kim.phillips@freescale.com>
6560 Date: Thu Aug 16 22:53:09 2007 -0500
6562 mpc83xx: move freescale boards to boards/freescale
6564 includes build fixes.
6566 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6568 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
6569 Author: Kim Phillips <kim.phillips@freescale.com>
6570 Date: Thu Aug 16 22:52:59 2007 -0500
6572 mpc83xx: suppress unused variable 'val8' warning
6574 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6576 commit bbea46f76f767b919070b4829bf34c86bd223248
6577 Author: Kim Phillips <kim.phillips@freescale.com>
6578 Date: Thu Aug 16 22:52:48 2007 -0500
6580 mpc83xx: implement board_add_ram_info
6582 add board_add_ram_info, to make memory diagnostic output more
6583 consistent. u-boot banner output now looks like:
6585 DRAM: 256 MB (DDR1, 64-bit, ECC on)
6587 and for boards with SDRAM on the local bus, a line such as this is
6590 SDRAM: 64 MB (local bus)
6592 also replaced some magic numbers with their equivalent define names.
6594 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6596 commit 14778585d1389d86d5846efec29e5fce892680ce
6597 Author: Tony Li <tony.li@freescale.com>
6598 Date: Fri Aug 17 10:35:59 2007 +0800
6600 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
6602 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
6603 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
6605 Signed-off-by Tony Li <tony.li@freescale.com>
6607 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
6608 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6609 Date: Thu Aug 16 15:05:11 2007 -0500
6611 ColdFire: Add M54455EVB for MCF5445x
6613 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6615 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
6616 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6617 Date: Thu Aug 16 13:20:50 2007 -0500
6619 ColdFire: Add M5253EVBE platform for MCF52x2
6621 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6623 commit a605aacd8324094199402816cc6d9124aba57b8d
6624 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6625 Date: Thu Aug 16 05:04:31 2007 -0500
6627 ColdFire: Add M5249EVB platform for MCF52x2
6629 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6631 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
6632 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6633 Date: Wed Aug 15 20:32:06 2007 -0500
6635 ColdFire: Update Freescale MCF52x2 platforms
6637 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6639 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
6640 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6641 Date: Wed Aug 15 19:55:10 2007 -0500
6643 ColdFire: Update EB+MCF-EV123 platform
6645 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6647 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
6648 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6649 Date: Wed Aug 15 19:46:38 2007 -0500
6651 ColdFire: update TASREG platform for MCF52x2
6653 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6655 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
6656 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6657 Date: Wed Aug 15 19:45:51 2007 -0500
6659 ColdFire: update r5200 platform for MCF52x2
6661 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6663 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
6664 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6665 Date: Wed Aug 15 19:43:20 2007 -0500
6667 ColdFire: idmr platform MCF52x2 update
6669 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6671 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
6672 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6673 Date: Wed Aug 15 19:41:06 2007 -0500
6675 ColdFire: cobra5272 platform for MCF52x2 update
6677 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6679 commit 56115665b4a64c10c01440c57749b265e0908fa4
6680 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6681 Date: Wed Aug 15 19:38:15 2007 -0500
6683 ColdFire: MCF52x2 Header files update
6685 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6687 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
6688 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6689 Date: Wed Aug 15 19:21:21 2007 -0500
6691 ColdFire: MCF52x2 update
6693 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6695 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
6696 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6697 Date: Wed Aug 15 18:46:11 2007 -0500
6699 ColdFire: MCF5329 update cache
6701 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6703 commit 7171977fb8fd77cfb6676953fa9a05789c450513
6704 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6705 Date: Wed Aug 15 15:40:20 2007 -0500
6707 ColdFire: MCF5329 header file clean up
6709 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6711 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
6712 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6713 Date: Wed Aug 15 15:39:17 2007 -0500
6715 ColdFire: MCF5329 Update and cleanup
6717 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6719 commit 10327dc5541f947c0cf7e31fef86c4706169607a
6720 Author: Andy Fleming <afleming@freescale.com>
6721 Date: Thu Aug 16 16:35:02 2007 -0500
6723 Add CONFIG_HAS_ETH0 to all boards with TSEC
6725 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
6726 to update TSEC1's device-tree node, so we need to add it
6727 to all the boards with TSECs. Do this for 83xx and 86xx, too,
6728 since they will eventually do something similar.
6730 Signed-off-by: Andy Fleming <afleming@freescale.com>
6732 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
6733 Author: Kumar Gala <galak@kernel.crashing.org>
6734 Date: Thu Aug 16 15:05:04 2007 -0500
6736 Update MPC8544 DS PCI memory map
6738 The PCIe bus that the ULI M1575 is connected to has no possible way of
6739 needing more than the fixed amount of IO & Memory space needed by the ULI.
6741 So make it use far less IO & memory space and have it use the shared LAW. This
6742 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
6745 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6747 commit ea5877e31ed63ade948fd1293895ec23fe01472e
6748 Author: Kumar Gala <galak@kernel.crashing.org>
6749 Date: Thu Aug 16 11:01:21 2007 -0500
6751 Fix up some fdt issues on 8544DS
6753 It looks like we had a merge issue that duplicated a bit of code
6754 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
6755 the MAC address properly set in the device tree on boot for TSEC1
6757 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6759 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
6760 Author: Niklaus Giger <niklaus.giger@netstal.com>
6761 Date: Thu Aug 16 15:16:03 2007 +0200
6763 PPC4xx:HCU4/5 cleanup
6765 Minor cleanups to confirm to the u-boot coding style.
6766 Some german expressions -> english.
6767 HCU5 enforces a unique IP adress for a given slot in the rack.
6769 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6771 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
6772 Author: Niklaus Giger <niklaus.giger@netstal.com>
6773 Date: Thu Aug 16 15:16:02 2007 +0200
6775 PPC4xx:HCU4/5 cleanup ecc/sdram init
6777 Make ecc initialisation robust, as DDR2-ECC errors may be generated
6778 while zeroing the RAM.
6780 Return 16 bytes (a cacheline) less than the available memory, as the
6781 board and/or PPC440EPx might have problems accessing the last bytes.
6783 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6785 commit d35b508a55508535b6e8445b718585d27df733d3
6786 Author: Kim Phillips <kim.phillips@freescale.com>
6787 Date: Wed Aug 15 22:29:56 2007 -0500
6789 fdt: suppress unused variable 'bd' warning
6791 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6793 commit 82bd9ee77490588d4da785d75829ca63d0176baf
6794 Author: Andy Fleming <afleming@freescale.com>
6795 Date: Wed Aug 15 20:06:50 2007 -0500
6797 Fix warnings from of_data copy fix
6799 Forgot to cast of_flat_tree to ulong.
6801 Signed-off-by: Andy Fleming <afleming@freescale.com>
6803 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
6804 Author: Andy Fleming <afleming@freescale.com>
6805 Date: Wed Aug 15 20:03:44 2007 -0500
6807 Don't wait for disconnected TSECs
6809 The TSEC driver's PHY code waits a long time for autonegotiation to
6810 complete, even if the link is down. The PHY knows the link is
6811 down or up before autonegotiation completes, so we can short-circuit
6812 the process if the link is down.
6814 Signed-off-by: Andy Fleming <afleming@freescale.com>
6816 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
6817 Author: Andy Fleming <afleming@freescale.com>
6818 Date: Wed Aug 15 20:03:34 2007 -0500
6820 Fix numerous bugs in the 8568 UEC support
6822 Actually, fixed a large bug in the UEC for *all* platforms.
6823 How did this ever work?
6825 uec_init() did not follow the spec for eth_init(), and returned
6826 0 on success. Switch it to return the link like tsec_init()
6829 The immap for the 8568 was defined based on MPC8568, rather than
6834 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
6836 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
6839 Signed-off-by: Andy Fleming <afleming@freescale.com>
6841 commit 3a79013e2adda53332dfd0b511066a805e929a9d
6842 Author: Andy Fleming <afleming@freescale.com>
6843 Date: Wed Aug 15 20:03:25 2007 -0500
6845 Define tsec flag values in config files
6847 The tsec_info structure and array has a "flags" field for each
6848 ethernet controller. This field is the only reason there are
6849 settings. Switch to defining TSECn_FLAGS for each controller
6850 in the config header, and we can greatly simplify the array, and
6851 also simplify the addition of future boards.
6853 Signed-off-by: Andy Fleming <afleming@freescale.com>
6855 commit ec7238229507e7f47533a611ea8c53319d234cf3
6856 Author: Andy Fleming <afleming@freescale.com>
6857 Date: Wed Aug 15 20:03:13 2007 -0500
6859 Add support for building all boards with a TSEC
6861 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
6862 Now we can do a MAKEALL test on all of them!
6864 Signed-off-by: Andy Fleming <afleming@freescale.com>
6866 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
6867 Author: Andy Fleming <afleming@freescale.com>
6868 Date: Wed Aug 15 17:30:56 2007 -0500
6870 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
6872 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
6873 neglected to *also* put the code inside the similar #ifdef
6874 for CONFIG_OF_FLAT_TREE.
6876 Signed-off-by: Andy Fleming <afleming@freescale.com>
6878 commit 78f9fef7f406078c8bf7191e665a73f795157746
6879 Author: Scott Wood <scottwood@freescale.com>
6880 Date: Wed Aug 15 15:46:46 2007 -0500
6882 mpc885ads: Don't define CONFIG_BZIP2.
6884 bzip2 requires a significant chunk of malloc space, and there isn't
6885 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
6886 and a downloaded image at 0x400000.
6888 Signed-off-by: Scott Wood <scottwood@freescale.com>
6890 commit 002275a3ed8b114885f6702d6d544d0780dfe689
6891 Author: Michal Simek <Monstr@seznam.cz>
6892 Date: Thu Aug 16 08:54:10 2007 +0200
6894 Bios emulator - fix microblaze toolchain problem
6896 microblaze CPU have problem with bios_emulator code.
6897 Microblaze toolchain doesn't support PRAGMA PACK.
6899 Signed-off-by: Michal Simek <monstr@monstr.eu>
6901 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
6902 Author: Wolfgang Denk <wd@denx.de>
6903 Date: Thu Aug 16 11:51:04 2007 +0200
6905 Minor Coding Style fix; Update CHANGELOG file.
6907 Signed-off-by: Wolfgang Denk <wd@denx.de>
6909 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
6910 Author: Stefan Roese <sr@denx.de>
6911 Date: Thu Aug 16 11:21:49 2007 +0200
6913 ppc4xx: Remove #warning in esd auto_update.c
6915 Signed-off-by: Stefan Roese <sr@denx.de>
6917 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
6918 Author: Stefan Roese <sr@denx.de>
6919 Date: Fri Jun 22 17:32:28 2007 +0200
6921 ppc7xx: Update CPCI750 board
6923 This small CPCI750 update extends the board specific command
6924 "show_config" to display the Marvell strapping registers and
6925 extends the PCI IDE controller.
6927 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
6928 Signed-off-by: Stefan Roese <sr@denx.de>
6930 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
6931 Author: Michal Simek <monstr@monstr.eu>
6932 Date: Thu Aug 16 10:46:28 2007 +0200
6934 [FIX] Changes for bios_emulator code for others architecture
6936 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
6937 Author: Michal Simek <monstr@monstr.eu>
6938 Date: Thu Aug 16 10:45:09 2007 +0200
6940 [FIX] Remove unused include file
6942 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
6943 Author: Stefan Roese <sr@denx.de>
6944 Date: Thu Aug 16 10:18:33 2007 +0200
6946 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
6948 Signed-off-by: Stefan Roese <sr@denx.de>
6950 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
6951 Author: Stefan Roese <sr@denx.de>
6952 Date: Thu Aug 16 09:54:51 2007 +0200
6954 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
6956 Signed-off-by: Stefan Roese <sr@denx.de>
6958 commit 02ba7022f62bb75908296c58c63866e1d294b69a
6959 Author: Stefan Roese <sr@denx.de>
6960 Date: Thu Aug 16 09:52:29 2007 +0200
6962 ppc4xx: Update Sequoia/Rainier bootstrap command
6964 As suggested by David Mitchell, here an update for the Sequoia/Rainier
6967 Signed-off-by: Stefan Roese <sr@denx.de>
6969 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
6970 Author: Kim Phillips <kim.phillips@freescale.com>
6971 Date: Wed Aug 15 22:30:39 2007 -0500
6973 mpc83xx: enable libfdt by default on freescale boards
6975 this enables libfdt code by default for the
6976 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
6977 mpc8349itx and gp boards.
6979 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6981 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
6982 Author: Kim Phillips <kim.phillips@freescale.com>
6983 Date: Wed Aug 15 22:30:33 2007 -0500
6985 mpc83xx: migrate remaining freescale boards to libfdt
6987 this adds libfdt support code for the freescale
6988 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
6991 Boards remain compatible with OF_FLAT_TREE.
6993 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6995 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
6996 Author: Kim Phillips <kim.phillips@freescale.com>
6997 Date: Wed Aug 15 22:30:26 2007 -0500
6999 mpc83xx: move common /memory node update mechanism to cpu.c
7001 also adds common prototypes to include/common.h.
7003 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7005 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
7006 Author: Kim Phillips <kim.phillips@freescale.com>
7007 Date: Wed Aug 15 22:30:19 2007 -0500
7009 mpc83xx: remaining 8360 libfdt fixes
7011 PCI clocks and QE frequencies weren't being updated, and the core clock
7012 was being updated incorrectly. This patch also adds a /memory node if
7013 it doesn't already exist prior to update.
7015 plus some cosmetic trimming to single line comments.
7017 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7019 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
7020 Author: Kim Phillips <kim.phillips@freescale.com>
7021 Date: Wed Aug 15 22:30:12 2007 -0500
7023 mpc83xx: fix UEC2->1 typo in libfdt setup code
7025 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7027 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
7028 Author: Kim Phillips <kim.phillips@freescale.com>
7029 Date: Wed Aug 15 22:30:05 2007 -0500
7031 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
7033 and reorder the existing 83xx maintainers alpha.
7035 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7037 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
7038 Author: Michal Simek <monstr@monstr.eu>
7039 Date: Wed Aug 15 21:15:05 2007 +0200
7041 [FIX] Resolve problem with warnings
7042 microblaze toolchain don't support PRAGMA PACK.
7044 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
7045 Author: Michal Simek <monstr@monstr.eu>
7046 Date: Wed Aug 15 21:05:07 2007 +0200
7048 [FIX] Correction command setting for Microblaze boards
7050 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
7051 Author: Michal Simek <monstr@monstr.eu>
7052 Date: Wed Aug 15 21:03:41 2007 +0200
7054 [FIX] Correction command definition
7056 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
7057 Author: Jon Loeliger <jdl@freescale.com>
7058 Date: Wed Aug 15 11:55:35 2007 -0500
7060 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
7062 Remove a leftover in net/tftp.c while we're at it.
7064 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7066 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
7067 Author: Jon Loeliger <jdl@freescale.com>
7068 Date: Wed Aug 15 12:20:40 2007 -0500
7070 Move the MPC8641HPCN board under board/freescale.
7072 Minor path corrections needed to ensure buildability.
7074 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7076 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
7077 Author: Jon Loeliger <jdl@freescale.com>
7078 Date: Wed Aug 15 11:46:22 2007 -0500
7080 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
7082 Remove a leftover in net/tftp.c while we're at it.
7084 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7086 commit 210f463c71917b7a4495c2103c228b9c179ae64d
7087 Author: Jerry Van Baren <gvb.uboot@gmail.com>
7088 Date: Wed Aug 15 11:13:15 2007 -0400
7090 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
7092 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
7093 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
7094 when it should have gone inside of the conditional. As a result, it
7095 broke non-LIBFDT board builds.
7097 Also added a missing "not." to the comment.
7099 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7101 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
7102 Author: Niklaus Giger <niklaus.giger@netstal.com>
7103 Date: Wed Aug 15 12:14:23 2007 +0200
7105 PPC4xx:HCU4/5-Board fix compile warning
7107 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7109 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
7110 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7111 Date: Tue Aug 14 14:06:45 2007 -0500
7113 Fix malloc size error in ahci_init_one.
7115 Typically this causes scsi init to corrupt the
7116 devlist and break the coninfo command.
7117 Fix a compiler size warning.
7119 Signed-off-by: Jason Jin <jason.jin@freescale.com>
7120 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7121 Acked-by: Andy Fleming <afleming@freescale.com>
7123 commit b361acd64fd2525c081b9b288b0804efe209c0e9
7124 Author: ksi@koi8.net <ksi@koi8.net>
7125 Date: Tue Aug 14 10:02:16 2007 -0700
7127 TI DaVinci - fix unsupported %hhx format
7129 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
7131 commit f01dbb5424a81453c81190dd30e945891466f621
7132 Author: Wolfgang Denk <wd@denx.de>
7133 Date: Tue Aug 14 18:42:36 2007 +0200
7135 Coding style cleanup. Update CHANGELOG.
7137 Signed-off-by: Wolfgang Denk <wd@denx.de>
7139 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
7140 Author: Andy Fleming <afleming@freescale.com>
7141 Date: Tue Aug 14 10:32:59 2007 -0500
7143 Fix initrd/dtb interaction
7145 The original code would wrongly relocate the blob to be right before
7146 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
7147 if it is defined. So we make two changes:
7149 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
7151 2) If the blob is being relocated, relocate it before kbd, not initrd
7153 Signed-off-by: Andy Fleming <afleming@freescale.com>
7155 commit e54b970173769307a116bd34028b6d0c2eea2a4e
7156 Author: Peter Pearse <peter.pearse@arm.com>
7157 Date: Tue Aug 14 15:40:00 2007 +0100
7159 Supply spi interface in at45.c
7161 commit 4ce846ec59f36b85d6644a769690ad3feb667575
7162 Author: Stefan Roese <sr@denx.de>
7163 Date: Tue Aug 14 15:12:01 2007 +0200
7165 POST: Fix merge problem
7167 Signed-off-by: Stefan Roese <sr@denx.de>
7169 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
7170 Author: Stefan Roese <sr@denx.de>
7171 Date: Tue Aug 14 15:03:17 2007 +0200
7173 Coding style cleanup
7175 Signed-off-by: Stefan Roese <sr@denx.de>
7177 commit 779e975117a75e91fcebe226a63104dbfb924ab1
7178 Author: Stefan Roese <sr@denx.de>
7179 Date: Tue Aug 14 14:44:41 2007 +0200
7181 ppc4xx: Add initial Zeus (PPC405EP) board support
7183 Signed-off-by: Stefan Roese <sr@denx.de>
7185 commit c5a172a5fd636c12467429e3f7910e53773979c6
7186 Author: Stefan Roese <sr@denx.de>
7187 Date: Tue Aug 14 14:41:55 2007 +0200
7189 POST: Add option for external ethernet loopback test
7191 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
7192 is not done using an internal loopback connection, but by assuming
7193 that an external loopback connector is plugged into the board.
7195 Signed-off-by: Stefan Roese <sr@denx.de>
7197 commit eb2b4010ae426245172988804ee8d9193fb41038
7198 Author: Stefan Roese <sr@denx.de>
7199 Date: Tue Aug 14 14:39:44 2007 +0200
7201 POST: Add ppc405 support to cache and UART POST
7203 Signed-off-by: Stefan Roese <sr@denx.de>
7205 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
7206 Author: Peter Pearse <peter.pearse@arm.com>
7207 Date: Tue Aug 14 10:46:32 2007 +0100
7209 Replace lost end of at45.c.
7211 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
7212 Author: Peter Pearse <peter.pearse@arm.com>
7213 Date: Tue Aug 14 10:30:06 2007 +0100
7215 Update Makefiles for merged and split at45.c.
7217 commit 3454cece2db57cb9eb7087995f7e73066a163f71
7218 Author: Peter Pearse <peter.pearse@arm.com>
7219 Date: Tue Aug 14 10:21:06 2007 +0100
7221 Delete the merged files.
7223 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
7224 Author: Peter Pearse <peter.pearse@arm.com>
7225 Date: Tue Aug 14 10:14:05 2007 +0100
7229 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
7230 Author: Peter Pearse <peter.pearse@arm.com>
7231 Date: Tue Aug 14 10:10:52 2007 +0100
7233 Add MACH_TYPE records for several AT91 boards.
7234 Merge to two at45.c files into a common file, split to at45.c and spi.c
7235 Fix spelling error in DM9161 PHY Support.
7236 Initialize at91rm9200 board (and set LED).
7237 Add PIO control for at91rm9200dk LEDs and Mux.
7238 Change dataflash partition boundaries to be compatible with Linux 2.6.
7240 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
7241 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
7243 commit 4ef35e53c693556c54b0c22d6f873de87bade253
7244 Author: Wolfgang Denk <wd@denx.de>
7245 Date: Tue Aug 14 09:54:46 2007 +0200
7247 Coding style cleanup, update CHANGELOG
7249 Signed-off-by: Wolfgang Denk <wd@denx.de>
7251 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
7252 Author: Wolfgang Denk <wd@denx.de>
7253 Date: Tue Aug 14 09:47:27 2007 +0200
7255 Coding style cleanup; rebuild CHANGELOG
7257 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
7258 Author: Randy Vinson <rvinson@linuxbox.(none)>
7259 Date: Tue Feb 27 19:42:22 2007 -0700
7261 85xxCDS: Add make targets for legacy systems.
7263 The PCI ID select values on the Arcadia main board differ depending
7264 on the version of the hardware. The standard configuration supports
7265 Rev 3.1. The legacy target supports Rev 2.x.
7267 Signed-off-by Randy Vinson <rvinson@mvista.com>
7269 commit e41094c7e38177c755fbd9b182018069614f080d
7270 Author: Andy Fleming <afleming@freescale.com>
7271 Date: Tue Aug 14 01:50:09 2007 -0500
7273 85xxCDS: Enable the VIA PCI-to-ISA bridge.
7275 Author: Randy Vinson <rvinson@linuxbox.(none)>
7277 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
7280 Signed-off-by: Randy Vinson <rvinson@mvista.com>
7281 Signed-off-by: York Sun <yorksun@freescale.com>
7283 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
7284 Author: Andy Fleming <afleming@freescale.com>
7285 Date: Tue Aug 14 00:14:25 2007 -0500
7287 Add support for UEC to 8568
7289 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7290 Signed-off-by: Andy Fleming <afleming@freescale.com>
7292 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
7293 Author: Haiying Wang <Haiying.Wang@freescale.com>
7294 Date: Tue Jun 19 14:18:34 2007 -0400
7296 Add PCI support for MPC8568MDS board
7298 This patch is against u-boot-mpc85xx.git of www.denx.com
7300 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7301 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
7303 commit d111d6382c99fdea08c2312eeeae8786945e189a
7304 Author: Haiying Wang <Haiying.Wang@freescale.com>
7305 Date: Tue Jun 19 14:18:32 2007 -0400
7307 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
7309 This patch is against u-boot-mpc85xx.git of www.denx.com
7311 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
7312 both MPC8548CDS board and MPC8568MDS board, especially for supporting
7315 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
7316 DDR2 on all current board versions especially ver 1.92 or later to bring
7319 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7321 commit 3db0bef59eab1155801618cef5c481e97553b597
7322 Author: Kumar Gala <galak@kernel.crashing.org>
7323 Date: Tue Aug 7 18:07:27 2007 -0500
7325 Use an absolute address when jumping out of 4k boot page
7327 On e500 when we leave the 4k boot page we should use an absolute address since
7328 we don't know where the board code may want us to be really running at.
7330 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7332 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
7333 Author: Andy Fleming <afleming@freescale.com>
7334 Date: Mon Aug 13 14:49:59 2007 -0500
7336 MPC85xx BA bits not set for 3-bit bank address DIMM
7338 The current implementation does not set the number of bank address bits
7339 (BA) in the processor. The default assumes 2 logical bank bits. This
7340 works fine for a DIMM that uses devices with 4 internal banks (SPD
7341 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
7342 devices with 8 internal banks (SPD byte17 = 0x8).
7344 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
7346 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
7347 Author: Andy Fleming <afleming@freescale.com>
7348 Date: Mon Aug 13 14:38:06 2007 -0500
7350 Fix minor 85xx warnings
7352 Some patches had inserted warnings into the build:
7353 * mpc8560ads declared data without using it
7354 * cpu_init declared ecm and immap without using it in all CONFIGs
7355 * MPC8548CDS.h had its default filenames changed so that they contained
7356 "\m" in the paths. Made the defaults not Windows-specific (or
7359 Signed-off-by: Andy Fleming <afleming@freescale.com>
7361 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
7362 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7363 Date: Fri Jul 27 01:50:52 2007 -0500
7365 8548cds PCIE support.
7367 Make the early L1 cache stack region guarded to prevent speculative
7368 fetches outside the locked range.
7370 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
7371 init.S whitespace cleanup.
7373 Allow TEXT_BASE value to be specified on command line. This allows it
7374 to be set to 0xfffc0000 which cuts the uboot binary in half.
7376 Clear and enable lbc and ecm errors.
7378 Update last_busno in device-tree for pci and pcie.
7380 Remove load of obsolete cpu/mpc85xx/pci.0
7382 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7383 Acked-by: Andy Fleming <afleming@freescale.com>
7385 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
7386 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7387 Date: Fri Jul 27 01:50:51 2007 -0500
7391 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
7393 Enable LBC and ECM errors and clear error registers.
7395 Add tftpflash env var to get uboot from tftp server and flash it.
7397 Add pci/pcie convenience env vars to display register space:
7398 "run pcie3regs" to see all pcie3 ccsr registers
7399 "run pcie3cfg" to see all cfg registers
7400 Whitespace cleanup and MPC8544DS.h
7402 Enable CONFIG_INTERRUPTS.
7404 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7405 Acked-by: Andy Fleming <afleming@freescale.com>
7407 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
7408 Author: Andy Fleming <afleming@freescale.com>
7409 Date: Tue Aug 14 01:34:21 2007 -0500
7411 85xx start.S cleanup and exception support
7413 From: Ed Swarthout <Ed.Swarthout@freescale.com>
7415 Support external interrupts from platform to eliminate system hangs.
7416 Define CONFIG_INTERRUPTS board configure option to enable.
7417 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
7419 Remove extra cpu initialization redundant with hardware initialization.
7422 Define and use _START_OFFSET consistent with other processors using
7425 Move additional code from .text to boot page to make room for
7426 exception vectors at start of image.
7428 Handle Machine Check, External and Critical exceptions.
7430 Fix e500 machine check error determination in traps.c
7432 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
7434 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7435 Acked-by: Andy Fleming <afleming@freescale.com>
7437 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
7438 Author: Andy Fleming <afleming@freescale.com>
7439 Date: Tue Aug 14 01:33:18 2007 -0500
7441 Add MPC8544DS README
7443 Signed-off-by: Andy Fleming <afleming@freescale.com>
7445 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
7446 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7447 Date: Fri Jul 27 01:50:48 2007 -0500
7449 85xx allow debugger to configure ddr.
7451 Only check for mpc8548 rev 1 when compiled for 8548.
7453 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7454 Acked-by: Andy Fleming <afleming@freescale.com>
7456 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
7457 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7458 Date: Fri Jul 27 01:50:47 2007 -0500
7460 mpc85xx L2 cache reporting and SRAM relocation option.
7462 Allow debugger to override flash cs0/cs1 settings to enable alternate
7465 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7466 Acked-by: Andy Fleming <afleming@freescale.com>
7468 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
7469 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7470 Date: Fri Jul 27 01:50:46 2007 -0500
7472 e500 needs ppc_asm.tmp MCK_EXCEPTION
7474 Always define MCK_EXCEPTION macro - so e500 can use it too.
7476 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7477 Acked-by: Andy Fleming <afleming@freescale.com>
7479 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
7480 Author: David Updegraff <dave@cray.com>
7481 Date: Mon Jun 11 10:41:07 2007 -0500
7483 multicast tftp: RFC2090
7485 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
7486 on Realtek RTL8139 and Freescale TSEC.
7488 Signed-off-by: David Updegraff <dave@cray.com>
7489 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7491 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
7492 Author: Wilson Callan <wcallan@savantav.com>
7493 Date: Sat Jul 28 10:56:13 2007 -0400
7495 New CONFIG_BOOTP_SERVERIP option
7497 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
7498 from the bootp server
7500 Signed-off-by: Wilson Callan <wcallan@savantav.com>
7501 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7503 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
7504 Author: Mike Rapoport <mike@compulab.co.il>
7505 Date: Sun Aug 12 08:48:27 2007 +0300
7507 Add ability to take MAC address from the environment to DM9000 driver
7509 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
7510 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7512 commit be5d72d10d47609326226225181e301fb9a33b58
7513 Author: Wolfgang Denk <wd@denx.de>
7514 Date: Mon Aug 13 21:57:53 2007 +0200
7516 Minor coding style cleanup. Update CHANGELOG.
7518 Signed-off-by: Wolfgang Denk <wd@denx.de>
7520 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
7521 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7522 Date: Sat Aug 11 06:54:58 2007 -0500
7524 Modify SBC8641D to use new Freescale PCI routines
7526 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
7529 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7530 Signde-off-by: Jon Loeliger <jdl@freescale.com>
7532 commit a08458303e7f9db67f296980036d3292c35cb45c
7533 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7534 Date: Fri Jun 29 18:38:51 2007 +0200
7536 atmel_mci: Fix data timeout value
7538 Calculate the data timeout based on values from the CSD instead of
7539 just using a hardcoded DTOR value. This is a backport of a similar fix
7540 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
7543 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7545 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
7546 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7547 Date: Mon Aug 13 17:22:31 2007 +0200
7549 AVR32: Include <div64.h> instead of <asm/div64.h>
7551 include/asm-avr32/div64.h was recently moved to include/div64.h, but
7552 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
7553 the patch was merged perhaps?)
7555 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
7558 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7560 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
7561 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7562 Date: Wed Jun 27 13:34:26 2007 +0200
7564 atmel_mci: Use 512 byte blocksize if possible
7566 Instead of always using the largest blocksize the card supports, check
7567 if it can support smaller block sizes and use 512 bytes if possible.
7568 Most cards do support this, and other parts of u-boot seem to have
7569 trouble with block sizes different from 512 bytes.
7571 Also enable underrun/overrun protection.
7573 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7574 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
7576 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
7577 Author: Stefan Roese <sr@denx.de>
7578 Date: Mon Aug 13 09:05:33 2007 +0200
7580 ppc4xx: Fix problem in PLL clock calculation
7582 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
7583 and fixes a bug in the PLL clock calculation.
7585 Signed-off-by: Stefan Roese <sr@denx.de>
7587 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
7588 Author: Wolfgang Denk <wd@denx.de>
7589 Date: Sun Aug 12 21:34:50 2007 +0200
7593 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
7594 Author: Wolfgang Denk <wd@denx.de>
7595 Date: Sun Aug 12 21:34:34 2007 +0200
7597 Minor alignment of output, 2nd try.
7598 Also update CHANGELOG
7600 Signed-off-by: Wolfgang Denk <wd@denx.de>
7602 commit 6b309f22a724fad8418e811751a0741b893419cf
7603 Author: Wolfgang Denk <wd@denx.de>
7604 Date: Sun Aug 12 20:35:49 2007 +0200
7606 Minor alignment of output
7608 Signed-off-by: Wolfgang Denk <wd@denx.de>
7610 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
7611 Author: Wolfgang Denk <wd@denx.de>
7612 Date: Sun Aug 12 18:28:18 2007 +0200
7614 Cleanup output on ADS5121 board
7616 Signed-off-by: Wolfgang Denk
7618 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
7619 Author: Wolfgang Denk <wd@denx.de>
7620 Date: Sun Aug 12 15:11:38 2007 +0200
7622 Adapt board configuration and fix kernel crash on MCC200 board.
7624 The update procedure was modified to turn off the USB subsystem
7625 before exit for MCC200 and TRAB. This is necessary as otherwise the
7626 USB controller continues to write periodically to system memory!
7628 MCC200-specific notes:
7629 - the patch disables the magic key check for MCC200
7630 - the patch contains the configuration changes made
7631 for the new revision of the board.
7633 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7634 Signed-off-by: Wolfgang Denk <wd@denx.de>
7636 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
7637 Author: Wolfgang Denk <wd@denx.de>
7638 Date: Sun Aug 12 14:47:54 2007 +0200
7640 Adjust default configuration of ADS5121 board.
7642 Signed-off-by: Wolfgang Denk <wd@denx.de>
7644 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
7645 Author: Wolfgang Denk <wd@denx.de>
7646 Date: Sun Aug 12 14:27:39 2007 +0200
7648 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
7650 Signed-off-by: Wolfgang Denk <wd@denx.de>
7652 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
7653 Author: Gerald Van Baren <vanbaren@cideas.com>
7654 Date: Tue Aug 7 21:14:22 2007 -0400
7656 Improve error print messages.
7658 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7660 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
7661 Author: Kim Phillips <kim.phillips@freescale.com>
7662 Date: Tue Jul 17 13:57:04 2007 -0500
7664 fdt: allow for builds that don't want env and bd_t nodes
7666 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
7669 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7671 commit 91148bf7aeba142d6f348805db7625db7da64d6f
7672 Author: Kim Phillips <kim.phillips@freescale.com>
7673 Date: Tue Jul 17 13:56:53 2007 -0500
7675 fdt: do board setup based on fdt address specified on bootm line
7677 The last fdt patch to bootm did board setup based on the address
7678 specified by a prior fdt address command invocation. The bootm
7679 code, as its call to fdt_chosen does, should use the fdt specified
7680 by the user on the bootm command. Note this restores full
7681 functionality for the 8360's existing default boot environment
7682 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
7683 before booting a kernel).
7685 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7687 commit e125a2ffc209dd34794e326c7175658253beadf3
7688 Author: Gerald Van Baren <vanbaren@cideas.com>
7689 Date: Tue Jul 10 20:40:39 2007 -0400
7691 Call ft_board_setup() from the bootm command.
7693 In the patch titled "Create new fdt boardsetup command..." I removed the
7694 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
7695 to add a direct call back into cmd_bootm.c
7697 This fixes the oversight by adding the direct call to the bootm command.
7699 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7701 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
7702 Author: Gerald Van Baren <vanbaren@cideas.com>
7703 Date: Mon Jun 25 23:25:28 2007 -0400
7705 Create new fdt boardsetup command, fix bug parsing [] form of set values.
7707 Previously ft_board_setup() was called by fdt_chosen() which was not
7708 really correctly structured. This splits ft_board_setup() out by creating
7709 a new fdt boardsetup command.
7711 Fix a bug when parsing fdt set command values which have the square
7712 bracket form [00 11 22 33] - the length was updated incorrectly in when
7715 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7717 commit 6f35ded9e85493595e0eb66a82b502a95326d049
7718 Author: Gerald Van Baren <vanbaren@cideas.com>
7719 Date: Mon Jun 25 20:55:58 2007 -0400
7721 Tighten up the error messages.
7723 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7725 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
7726 Author: Gerald Van Baren <vanbaren@cideas.com>
7727 Date: Mon Jun 25 19:52:23 2007 -0400
7729 Asthetic improvements: error messages and line lengths.
7731 Tighten up the error messages, split overlength lines.
7733 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7735 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
7736 Author: Gerald Van Baren <vanbaren@cideas.com>
7737 Date: Fri May 25 22:08:57 2007 -0400
7739 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
7741 The fdt_chosen() function was adding/seting some properties ad-hoc
7742 improperly and duplicated (poorly) what was done in ft_board_setup()
7744 Clean up long lines (setting properties, printing errors).
7746 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7748 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
7749 Author: Gerald Van Baren <vanbaren@cideas.com>
7750 Date: Mon May 21 23:27:16 2007 -0400
7752 For fdt_find_node_by_path(), handle the root path properly.
7754 Also removes the special case root path detection in cmd_fdt.c since it
7755 is no longer necessary.
7757 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7759 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
7760 Author: Gerald Van Baren <vanbaren@cideas.com>
7761 Date: Thu May 17 23:54:36 2007 -0400
7763 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
7765 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
7766 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7768 commit 1a861169bc3758f9de3aead62b058736c6891246
7769 Author: Gerald Van Baren <vanbaren@cideas.com>
7770 Date: Wed Jun 6 22:47:58 2007 -0400
7772 Replace fdt_node_offset() with fdt_find_node_by_path().
7774 The new name matches more closely the kernel's name, which is also
7775 a much better description.
7777 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
7778 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7780 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
7781 Author: Gerald Van Baren <vanbaren@cideas.com>
7782 Date: Wed May 16 22:39:59 2007 -0400
7784 Fix cmd_fdt line lengths, refactor code.
7786 Break lines that were greater than 80 characters in length.
7787 Move the fdt print and property parsing code to separate static functions
7788 to reduce coding clutter in the fdt_cmd handling body.
7790 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7792 commit 25114033ab21788810c48ba4df103b649da1223b
7793 Author: Gerald Van Baren <vanbaren@cideas.com>
7794 Date: Sat May 12 09:47:25 2007 -0400
7796 FDT command improvements.
7798 Fix "fdt set" so that it will create a non-existing property.
7799 Add "fdt mknode" to create nodes.
7801 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7803 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
7804 Author: Gerald Van Baren <vanbaren@cideas.com>
7805 Date: Sat May 12 09:45:46 2007 -0400
7807 Reorganize and fix problems (returns) in the bootm command.
7809 Do *NOT* return after the "point of no return" has been passed.
7810 If something goes wrong, the board must be reset after that point.
7811 Move the "Transferring control to Linux" debug message back to where it
7812 belongs: just before transferring control to linux.
7814 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7816 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
7817 Author: Gerald Van Baren <vanbaren@cideas.com>
7818 Date: Tue May 8 21:27:35 2007 -0400
7820 Fix bugs in the CONFIG_OF_LIBFDT
7822 Stupid coding mistakes (identified by Timur Tabi, thanks).
7824 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7826 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
7827 Author: Gerald Van Baren <vanbaren@cideas.com>
7828 Date: Wed Apr 25 22:47:15 2007 -0400
7830 Improve fdt move length handling.
7832 Make the length parameter optional: if not specified, do the move using
7833 the current size unchanged.
7835 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7837 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
7838 Author: Gerald Van Baren <vanbaren@cideas.com>
7839 Date: Wed Apr 25 22:23:36 2007 -0400
7841 Minor code clean up.
7843 Declare the variable fdt properly as extern.
7844 Call the "set_fn" function pointer the "short way" without the full
7845 dereferencing syntax.
7847 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7849 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
7850 Author: Gerald Van Baren <vanbaren@cideas.com>
7851 Date: Wed Apr 25 21:24:27 2007 -0400
7853 Improve error messages, more informative.
7855 Print more than the raw libfdt error message strings. This is especially
7856 useful for cluing in the user when the bootm command aborts due to
7859 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7861 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
7862 Author: Gerald Van Baren <vanbaren@cideas.com>
7863 Date: Fri Apr 20 22:46:53 2007 -0400
7865 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
7867 This is the way u-boot reduces configured-out code. At Wolfgang
7868 Grandegger and Wolfgang Denk's request, make libfdt conform.
7870 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7872 commit 923efd286411ed052d9e074f59f8986d6081061c
7873 Author: Bruce Adler <bruce.adler@ccpu.com>
7874 Date: Fri Aug 10 14:54:47 2007 -0700
7876 add image size and descriptors for Spartan 3E FPGA chips
7878 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
7880 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
7882 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
7883 Author: Kim Phillips <kim.phillips@freescale.com>
7884 Date: Fri Aug 10 15:34:48 2007 -0500
7886 make MAKEALL more immune to merge conflicts
7888 ..by placing board entries one per line, as suggested by jdl.
7890 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7892 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
7893 Author: Kim Phillips <kim.phillips@freescale.com>
7894 Date: Fri Aug 10 13:28:25 2007 -0500
7896 README: Remove outdated cpu type, board type, and NAME_config lists
7898 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7900 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
7901 Author: Dave Liu <r63238@freescale.com>
7902 Date: Fri Aug 10 15:48:59 2007 +0800
7904 mpc83xx: Suppress the warning 'burstlen'
7906 suppress the warning 'burstlen' of spd_sdram.
7908 Signed-off-by: Dave Liu <daveliu@freescale.com>
7910 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
7911 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7912 Date: Thu Aug 9 15:11:03 2007 -0500
7914 Add support for SBC8641D. Config files.
7916 Add support for Wind River's SBC8641D reference board.
7918 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7919 Acked-by: Wolfgang Denk <wd@denx.de>
7920 Acked-by: Jon Loeliger <jdl@freescale.com>
7922 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
7923 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7924 Date: Thu Aug 9 15:10:53 2007 -0500
7926 Add support for SBC8641D. Board files.
7928 Add support for Wind River's SBC8641D reference board.
7930 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7931 Acked-by: Wolfgang Denk <wd@denx.de>
7932 Acked-by: Jon Loeliger <jdl@freescale.com>
7934 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
7935 Author: Stefan Roese <sr@denx.de>
7936 Date: Fri Aug 10 20:34:58 2007 +0200
7938 Conding style cleanup
7940 Signed-off-by: Stefan Roese <sr@denx.de>
7942 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
7943 Author: Sergey Kubushyn <ksi@koi8.net>
7944 Date: Fri Aug 10 20:26:18 2007 +0200
7946 [ARM] TI DaVinci support, hopefully final
7948 Add support for the following DaVinci boards:
7955 - Split into separate board directories
7956 - Removed changes to MTD_DEBUG (or whatever it's called)
7957 - New CONFIG_CMD party line followed
7958 - Some cosmetic fixes, cleanup etc.
7959 - Patches against the latest U-Boot tree as of now.
7960 - Fixed CONFIG_CMD_NET in net files.
7961 - Fixed CONFIG_CMD_EEPROM for schmoogie.
7962 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
7963 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
7964 but it at least compiles.
7966 Here is an excerpt from session log on SCHMOOGIE...
7968 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
7977 ETH PHY : DP83848 @ 0x01
7979 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
7980 U-Boot > ping 192.168.253.10
7981 host 192.168.253.10 is alive
7984 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
7985 Acked-by: Dirk Behme <dirk.behme@gmail.com>
7986 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
7987 Acked-by: Stefan Roese <sr@denx.de>
7989 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
7990 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7991 Date: Fri Jul 27 01:50:45 2007 -0500
7993 fsl_pci_init cleanup.
7995 Do not enable normal errors created during probe (master abort, perr,
7996 and pcie Invalid Configuration access).
7998 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
8000 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8001 Acked-by: Andy Fleming <afleming@freescale.com>
8003 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
8004 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8005 Date: Fri Jul 27 01:50:44 2007 -0500
8007 pciauto_setup_device bars_num fix
8009 Passing bars_num=0 to pciauto_setup_device should assign no bars.
8011 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8012 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8013 Acked-by: Andy Fleming <afleming@freescale.com>
8015 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
8016 Author: Jon Loeliger <jdl@freescale.com>
8017 Date: Mon Aug 6 17:39:44 2007 -0500
8019 8641hpcn: Do correct sized pointer math.
8021 When I rebased Ed's patch and cleaned up a few compilation
8022 problems, I apparently rebased my brain on crack first.
8023 Fix that by doing (char *) sized pointer math as needed.
8025 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8027 commit cfc7a7f5bb3273c9951173c788001d45118f141f
8028 Author: Jon Loeliger <jdl@freescale.com>
8029 Date: Thu Aug 2 14:42:20 2007 -0500
8034 Always set PICGCR_MODE.
8035 Enable machine check and provide board config option
8036 to set and handle SoC error interrupts.
8038 Include MSSSR0 in error message.
8040 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
8042 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8043 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8045 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
8046 Author: Stefan Roese <sr@denx.de>
8047 Date: Fri Aug 10 10:42:25 2007 +0200
8049 Coding style cleanup
8051 Signed-off-by: Stefan Roese <sr@denx.de>
8053 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
8054 Author: Dirk Behme <dirk.behme@googlemail.com>
8055 Date: Thu Aug 2 17:42:08 2007 +0200
8057 Make use of generic 64bit division in nand_util.c
8059 Use generic 64bit division in nand_util.c. This makes nand_util.c
8060 independent of any toolchain 64bit division.
8062 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
8064 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
8065 Author: Dirk Behme <dirk.behme@googlemail.com>
8066 Date: Thu Aug 2 17:41:14 2007 +0200
8068 Move 64bit division from avr32 to generic lib
8070 Move the 64bit division from lib_avr32 to lib_generic. With this, all
8071 boards can do_div/__div64_32 if needed, not only avr one. Code is put
8072 to lib_generic, so no larger memory footprint if not used. No code
8073 modifications. Thanks for proposal by Håvard Skinnemoen.
8075 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
8077 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
8078 Author: Niklaus Giger <niklausgiger@gmx.ch>
8079 Date: Fri Jul 27 11:31:22 2007 +0200
8081 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
8083 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8085 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
8086 Author: Niklaus Giger <niklausgiger@gmx.ch>
8087 Date: Fri Jul 27 11:30:33 2007 +0200
8089 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
8091 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8093 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
8094 Author: Niklaus Giger <niklausgiger@gmx.ch>
8095 Date: Fri Jul 27 11:38:26 2007 +0200
8097 Add PPC4xx-HCU4 and HCU5 boards: common files
8099 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8101 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
8102 Author: Niklaus Giger <niklausgiger@gmx.ch>
8103 Date: Fri Jul 27 11:28:44 2007 +0200
8105 Add PPC4xx-HCU4 and HCU5 boards: make related
8107 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8109 commit 137fdd9f474ecb853efdace5200576308c67f18d
8110 Author: Niklaus Giger <niklausgiger@gmx.ch>
8111 Date: Fri Jul 27 11:28:03 2007 +0200
8113 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
8115 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8117 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
8118 Author: Niklaus Giger <niklausgiger@gmx.ch>
8119 Date: Fri Jul 27 11:27:15 2007 +0200
8121 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
8123 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8125 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
8126 Author: Niklaus Giger <niklausgiger@gmx.ch>
8127 Date: Fri Jul 27 11:25:31 2007 +0200
8129 Add PPC4xx-HCU4 and HCU5 boards: READMEs
8131 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8133 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
8134 Author: Niklaus Giger <niklausgiger@gmx.ch>
8135 Date: Fri Jul 27 11:37:40 2007 +0200
8137 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
8139 This series of patches adds support for 2 boards from Netstal Maschinen.
8141 The HCU4 has a PPC405Gpr and
8142 the HCU5 has a PPC440EPX.
8144 The HCU4 has a somehow complicated flash setup, as the booteprom is
8145 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
8148 The HCU5 has only a booteprom as the whole code will be downloaded from a
8149 different board which has HD, CD-ROM, etc and where all code is stored.
8151 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
8154 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8156 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
8157 Author: Stefan Roese <sr@denx.de>
8158 Date: Fri Aug 10 08:42:55 2007 +0200
8160 ppc4xx: Update lwmon5 POST configuration
8162 Signed-off-by: Stefan Roese <sr@denx.de>
8164 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
8165 Author: Yuri Tikhonov <yur@emcraft.com>
8166 Date: Fri Aug 10 08:25:22 2007 +0200
8168 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
8170 The patch adds support for UART POST on ppc44x-based boards with no
8171 external serial clocks installed.
8173 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
8174 Acked-by: Stefan Roese <sr@denx.de>
8176 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
8177 Author: Kim Phillips <kim.phillips@freescale.com>
8178 Date: Mon Aug 6 18:18:34 2007 -0500
8180 mpc83xx: fix ITX[GP] O=builddir builds
8182 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
8184 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
8185 "BUILD_DIR=<some dir> ./MAKEALL ..."
8187 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8189 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
8190 Author: Dave Liu <r63238@freescale.com>
8191 Date: Wed Aug 1 15:00:59 2007 +0800
8193 mpc83xx: Correct the README for DDR ECC
8195 Update the README for DDR ECC, change the name
8196 to README.mpc83xx.ddrecc.
8198 Signed-off-by: Dave Liu <daveliu@freescale.com>
8199 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8201 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
8202 Author: Dave Liu <r63238@freescale.com>
8203 Date: Wed Aug 1 15:00:15 2007 +0800
8205 mpc83xx: Consolidate the ECC support of 83xx
8207 Remove the duplicated source code of ecc command on the <board>.c,
8208 for reused, move these code to cpu/mpc83xx directory.
8210 Signed-off-by: Dave Liu <daveliu@freescale.com>
8211 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8213 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
8214 Author: Dave Liu <r63238@freescale.com>
8215 Date: Sat Aug 4 13:37:39 2007 +0800
8217 mpc83xx: Correct the burst length for DDR2 with 32 bits
8219 The burst length should be 4 for DDR2 with 32 bits bus
8221 Signed-off-by: Dave Liu <daveliu@freescale.com>
8223 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
8224 Author: Kim Phillips <kim.phillips@freescale.com>
8225 Date: Wed Jul 25 19:25:33 2007 -0500
8227 mpc83xx: add support for the MPC8323E RDB
8229 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
8230 five 10/100 ethernet ports connected via an ICPlus IP175C
8231 switch, one PCI slot, and serial. Features not supported
8232 in this patch are SD card interface, 2 USB ports, and the
8235 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
8236 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8238 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
8239 Author: Kim Phillips <kim.phillips@freescale.com>
8240 Date: Wed Jul 25 19:25:28 2007 -0500
8242 mpc83xx: fixup generic pci for libfdt
8244 add libfdt support to the generic 83xx pci code
8246 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8248 commit f57ac7a7b37109245b69db80839ebee26179966a
8249 Author: Kim Phillips <kim.phillips@freescale.com>
8250 Date: Wed Jul 25 19:25:22 2007 -0500
8252 mpc83xx: fix 8360 and cpu functions to update fdt being passed
8254 ..and not the global fdt. Rename local fdt vars to blob so as not to
8255 be confused with the global var with the same three-letter name.
8257 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8259 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
8260 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8261 Date: Wed Jul 4 21:34:24 2007 -0400
8263 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
8265 Several node strings were not correct (trailing slashes and properties
8267 Added setting of the timebase-frequency.
8268 Improved error messages and use debug() instead of printf().
8270 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
8271 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8273 commit 26d02c9bbac1751c5e19294f000100b48d43a920
8274 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8275 Date: Wed Jul 4 21:27:30 2007 -0400
8277 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
8279 The new name matches more closely the kernel's name, which is also
8280 a much better description.
8282 These are the mpc83xx changes made necessary by the function name change.
8284 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
8285 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
8286 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8288 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
8289 Author: Dave Liu <daveliu@freescale.com>
8290 Date: Mon Jun 25 10:41:56 2007 +0800
8292 mpc83xx: Add support for the display of reset status
8294 83xx processor family has many reset sources, such as
8295 power on reset, software hard reset, software soft reset,
8296 JTAG, bus monitor, software watchdog, check stop reset,
8297 external hard reset, external software reset.
8298 sometimes, to figure out the fault of system, we need to
8299 know the cause of reset early before the prompt of
8302 Signed-off-by: Dave Liu <daveliu@freescale.com>
8303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8305 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
8306 Author: Dave Liu <daveliu@freescale.com>
8307 Date: Mon Jun 25 10:41:04 2007 +0800
8309 mpc83xx: Fix the align bug of SDMA buffer
8311 According to the latest user manual, the SDMA temporary
8312 buffer base address must be 4KB aligned.
8314 Signed-off-by: Dave Liu <daveliu@freescale.com>
8315 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8317 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
8318 Author: Dave Liu <daveliu@freescale.com>
8319 Date: Mon Jun 25 13:21:12 2007 +0800
8321 mpc83xx: Revise the MPC8360EMDS readme doc
8323 When the rev2.x silicon mount on the MPC8360EMDS baord,
8324 and if you are using the u-boot version after the commit
8325 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
8326 to make the ethernet interface usable, we have to setup
8327 the jumpers correctly.
8329 Signed-off-by: Dave Liu <daveliu@freescale.com>
8330 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8332 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
8333 Author: Timur Tabi <timur@freescale.com>
8334 Date: Tue Jul 3 13:46:32 2007 -0500
8336 FSL I2C driver programs the two I2C busses differently
8338 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
8339 The second I2C bus has its slave address programmed incorrectly and is
8340 missing a 5-us delay.
8342 Signed-off-by: Timur Tabi <timur@freescale.com>
8343 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8345 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
8346 Author: Timur Tabi <timur@freescale.com>
8347 Date: Tue Jul 3 13:04:34 2007 -0500
8349 Update SCCR programming in cpu_init_f() to support all 83xx processors
8351 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
8352 bitfields for all 83xx processors. The code to update some bitfields was
8353 compiled only on some processors. Now, the bitfields are programmed as long
8354 as the corresponding CFG_SCCR option is defined in the board header file.
8355 This means that the board header file should not define any CFG_SCCR macros
8356 for bitfields that don't exist on that processor, otherwise the SCCR will be
8357 programmed incorrectly.
8359 Signed-off-by: Timur Tabi <timur@freescale.com>
8360 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8362 commit 9546266999f0b9b51372636614211b88d90f0f25
8363 Author: Martin Krause <martin.krause@tqs.de>
8364 Date: Fri Jun 22 13:04:22 2007 +0200
8366 TQM834x: cleanup configuraton
8368 Remove irritating #undef DEBUG
8370 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8371 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8373 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
8374 Author: david.saada <David.Saada@ecitele.com>
8375 Date: Mon Jun 18 09:09:53 2007 -0700
8377 MPC83xx: Fix makefile to generate config.h file in the build directory
8379 MPC83xx: Fix the Makefile config sections to generate the include/config.h
8380 file in the build directory instead of the source directory.
8382 Signed-off-by: David Saada <david.saada@ecitele.com>
8383 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8385 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
8386 Author: Lee Nipper <Lee.Nipper@freescale.com>
8387 Date: Thu Jun 14 20:07:33 2007 -0500
8389 mpc83xx: Add support for 8360 silicon revision 2.1
8391 This change adds 8360 silicon revision 2.1 support to u-boot.
8393 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
8394 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8396 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
8397 Author: Kumar Gala <galak@kernel.crashing.org>
8398 Date: Wed Aug 8 04:14:28 2007 -0500
8400 Treat ppc64 host as ppc
8402 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8404 commit 0dc4279b08ff82472bec2e2c90858602459febe8
8405 Author: Jason Jin <Jason.jin@freescale.com>
8406 Date: Wed Aug 8 09:01:46 2007 +0800
8408 Minor fix for bios emulator makefile
8410 Add $(obj) to LIB avoiding objects be built in the source dir
8412 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8414 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
8415 Author: Jason Jin <Jason.jin@freescale.com>
8416 Date: Wed Aug 8 08:33:11 2007 +0800
8418 Add CONFIG_BIOSEMU define to guard all the bios emulator code
8420 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8422 This patch fix the compile issue on the board that did not enable the bios emulator
8424 commit ed8106433522f2ea8933e9808346860d061d7731
8425 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
8426 Date: Tue Jul 31 12:27:25 2007 -0500
8428 tsec: fix multiple PHY support
8430 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
8431 broke multiple PHY support in tsec.c. This fixes it.
8433 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
8434 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8436 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
8437 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
8438 Date: Thu Aug 9 09:08:18 2007 -0500
8440 tsec: Allow Ten Bit Interface address to be configurable
8442 Allow the address of the Ten Bit Interface (TBI) to be changed in the
8443 event of a conflict with another device.
8445 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
8447 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
8448 Author: Stefan Roese <sr@denx.de>
8449 Date: Wed Aug 8 09:54:26 2007 +0200
8451 Coding style cleanup
8453 Signed-off-by: Stefan Roese <sr@denx.de>
8455 commit a41de1f0d373e09c782dea558385a06247111ba5
8456 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8457 Date: Sun Aug 5 05:15:18 2007 -0500
8459 Port enabled for I2C signals and chipselects port configuration.
8461 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8463 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
8464 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8465 Date: Sun Aug 5 04:31:18 2007 -0500
8469 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8471 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
8472 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8473 Date: Sun Aug 5 04:11:20 2007 -0500
8477 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8479 commit 99c03c175d2689093176facf17c58ce2cb320001
8480 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8481 Date: Sun Aug 5 03:58:52 2007 -0500
8483 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
8485 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8487 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
8488 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8489 Date: Sun Aug 5 03:55:21 2007 -0500
8491 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
8493 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8495 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
8496 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8497 Date: Sun Aug 5 03:43:30 2007 -0500
8499 Moved sync() from board file to include/asm-m68k/io.h
8501 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8503 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
8504 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8505 Date: Sun Aug 5 03:30:44 2007 -0500
8507 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
8509 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8511 commit 9998bd37ead85e93953559720710d3b0685c81e6
8512 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8513 Date: Sun Aug 5 03:19:10 2007 -0500
8515 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
8517 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8519 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
8520 Author: Jason Jin <Jason.jin@freescale.com>
8521 Date: Tue Aug 7 16:17:06 2007 +0800
8523 Add CONFIG_BIOSEMU define to guard all the bios emulator code
8525 This patch fix the compile issue on the board that did not enable the bios emulator
8527 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
8528 Author: Wolfgang Denk <wd@denx.de>
8529 Date: Tue Aug 7 16:02:13 2007 +0200
8531 Fix missing brace error in fs/fat/fat.c
8532 [pointed out by Roderik Wildenburg]
8534 Signed-off-by: Wolfgang Denk <wd@denx.de>
8536 commit 706714d97a0d08d59eda4de2268c39f504688329
8537 Author: Michal Simek <monstr@monstr.eu>
8538 Date: Mon Aug 6 23:41:53 2007 +0200
8540 [FIX] remove cute code
8542 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
8543 Author: Michal Simek <monstr@monstr.eu>
8544 Date: Mon Aug 6 23:35:26 2007 +0200
8546 [FIX] Fix romfs code
8548 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
8549 Author: Michal Simek <monstr@monstr.eu>
8550 Date: Mon Aug 6 23:31:49 2007 +0200
8552 [FIX] Coding style cleanup - Wolfgang's suggestions
8554 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
8555 Author: Wolfgang Denk <wd@denx.de>
8556 Date: Mon Aug 6 23:21:05 2007 +0200
8558 Fixed typo in README (pointed out by Martin Jost).
8560 Signed-off-by: Wolfgang Denk <wd@denx.de>
8562 commit 537223afa61f64480df31ce440a9cb386df4a814
8563 Author: Stefan Roese <sr@denx.de>
8564 Date: Mon Aug 6 21:10:17 2007 +0200
8566 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
8568 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
8569 here an updated Bamboo README.
8571 Signed-off-by: Stefan Roese <sr@denx.de>
8573 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
8574 Author: Wolfgang Denk <wd@denx.de>
8575 Date: Mon Aug 6 02:17:36 2007 +0200
8577 Coding style cleanup. Update CHANGELOG.
8579 Signed-off-by: Wolfgang Denk <wd@denx.de>
8581 commit 221838cc7eb178370ff62aa05920a582e12ac322
8582 Author: Jason Jin <Jason.jin@freescale.com>
8583 Date: Tue Jul 10 09:03:22 2007 +0800
8585 Remove the bios emulator from MAI board.
8587 The bios emulator in the MAI board can not pass compile
8588 and have a lot of crap in it. remove it and will have a
8589 clean and small bios emulator in the drivers directory
8590 which can be uesed for every board.
8592 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8594 commit 5618332409bb96f4448d1712899369fc80c0b489
8595 Author: Jason Jin <Jason.jin@freescale.com>
8596 Date: Fri Jul 13 12:14:59 2007 +0800
8598 Fix some compile issues for MAI board.
8600 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8602 commit 0f460a1ee148b648ee242c3157650287d4296260
8603 Author: Jason Jin <Jason.jin@freescale.com>
8604 Date: Fri Jul 13 12:14:58 2007 +0800
8606 Configurations for ATI video card BIOS emulator
8608 This patch add definition of the BIOS emulator and the ATI framebuffer
8609 driver for MPC8641HPCN board.
8611 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8612 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8614 commit ece92f85053b8df613edcf05b26a416cbc3d629c
8615 Author: Jason Jin <Jason.jin@freescale.com>
8616 Date: Fri Jul 6 08:34:56 2007 +0800
8618 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
8619 ATI video card BIOS. and can be used for x86 code emulation by some
8622 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8624 commit 5072188acabde3178fac7f5a597150e6e74fd40c
8625 Author: Jason Jin <Jason.jin@freescale.com>
8626 Date: Fri Jul 6 08:33:33 2007 +0800
8628 This is a framebuffer driver for ATI video card, can work for PCI9200,
8629 X300, X700, X800 ATI video cards.
8631 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8632 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8634 commit 5728be389e65fd47f34b33c2596271eb4db751ae
8635 Author: Wolfgang Denk <wd@denx.de>
8636 Date: Mon Aug 6 01:01:49 2007 +0200
8638 Coding style cleanup. Update CHANGELOG.
8640 Signed-off-by: Wolfgang Denk <wd@denx.de>
8642 commit 8092fef4c29b395958bb649647da7e3775731517
8643 Author: Martin Krause <Martin.Krause@tqs.de>
8644 Date: Tue Dec 12 14:26:01 2006 +0100
8646 Add functions to list of exported functions
8648 Additionally export the following fuctions (to make trab_config build again):
8652 Also bump the ABI version to reflect this change
8654 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8656 commit 63cec5814fab5d2b1c86982327433807a5ac0249
8657 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8658 Date: Thu Aug 2 14:09:49 2007 -0500
8660 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
8662 All of the PCI/PCI-Express driver and initialization code that
8663 was in the MPC8641HPCN port has now been moved into the common
8664 drivers/fsl_pci_init.c. In a subsequent patch, this will be
8665 utilized by the 85xx ports as well.
8667 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
8669 Also enable the second PCI-Express controller on 8641
8670 by getting its BATS and CFG_ setup right.
8672 Fixed a u16 vendor compiler warning in AHCI driver too.
8674 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8675 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8676 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8678 commit a274ca4f6d68830e7c916f897561cff8c4101c38
8679 Author: Michal Simek <monstr@monstr.eu>
8680 Date: Sun Aug 5 22:33:05 2007 +0200
8682 [FIX] Coding style cleanup
8684 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
8685 Author: Michal Simek <monstr@monstr.eu>
8686 Date: Sun Aug 5 16:13:31 2007 +0200
8688 [FIX] Xilinx Uartlite driver
8689 Because PPC405 can use UARTLITE serial interface and
8690 Microblaze can use Uart16550 serial interface not only Uartlite.
8692 commit 98889edd50aadf862071eb5664747ad0d568a20e
8693 Author: Michal Simek <monstr@monstr.eu>
8694 Date: Sun Aug 5 15:54:53 2007 +0200
8696 [FIX] Change configuration for XUPV2P Microblaze board
8698 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
8699 Author: Michal Simek <monstr@monstr.eu>
8700 Date: Sun Aug 5 15:53:50 2007 +0200
8702 [PATCH] Added support for Xilinx Emac community driver
8704 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
8705 Author: Bartlomiej Sieka <tur@semihalf.com>
8706 Date: Fri Aug 3 12:08:16 2007 +0200
8708 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
8710 Add the ability for modules from the Schindler cm5200 family to use a
8711 single U-Boot image:
8712 - rename cm1_qp1 to cm5200
8713 - add run-time module detection
8714 - parametrize SDRAM configuration according to the module we are running on
8716 Few minor, board-specific fixes included in this patch:
8717 - better MAC address handling
8718 - updated default environment ('update' command uses +{filesize} now)
8719 - improved error messages in the auto-update code
8720 - allow booting U-Boot from RAM (CFG_RAMBOOT)
8722 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8723 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
8724 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8726 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
8727 Author: Andy Fleming <afleming@freescale.com>
8728 Date: Fri Aug 3 04:05:25 2007 -0500
8730 Add Marvell 1149 PHY support to the TSEC
8732 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
8733 Author: Wolfgang Denk <wd@denx.de>
8734 Date: Thu Aug 2 21:27:46 2007 +0200
8736 Coding style cleanup, update CHANGELOG
8738 Signed-off-by: Wolfgang Denk <wd@denx.de>
8740 commit 63e22764d2f8653f68888c667eb65b3996b52680
8741 Author: Wolfgang Denk <wd@denx.de>
8742 Date: Thu Aug 2 10:11:18 2007 +0200
8744 Minor cleanup of <board>_nand build rules.
8746 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
8747 Author: Stefan Roese <sr@denx.de>
8748 Date: Thu Aug 2 08:33:56 2007 +0200
8750 ppc4xx: Code cleanup
8752 Signed-off-by: Stefan Roese <sr@denx.de>
8754 commit c92409812206ac67a7fa7aae298539a9c3804a46
8755 Author: Grzegorz Bernacki <gjb@semihalf.com>
8756 Date: Tue Jul 31 18:51:48 2007 +0200
8758 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
8760 During config transactions on the PCIe bus an attempt to scan for a
8761 non-existent device can lead to a machine check exception with certain
8762 peripheral devices. In order to avoid crashing in such scenarios the
8763 instrumented versions of the config cycle read routines are introduced, so
8764 the exceptions fixups framework can gracefully recover.
8766 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8767 Acked-by: Rafal Jaworowski <raj@semihalf.com>
8769 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
8770 Author: Rafal Jaworowski <raj@semihalf.com>
8771 Date: Tue Jul 31 18:19:54 2007 +0200
8773 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
8775 This brings back separate settings for PCIe bus numbers depending on chip
8776 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
8777 commit. 440SPe rev. A does NOT work properly with the same settings as for
8778 the rev. B (no devices are seen on the bus during enumeration).
8780 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8782 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
8783 Author: Wolfgang Denk <wd@denx.de>
8784 Date: Thu Aug 2 00:48:45 2007 +0200
8786 Fix build errors and warnings / code cleanup.
8788 Signed-off-by: Wolfgang Denk <wd@denx.de>
8790 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
8791 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
8792 Date: Tue Jul 31 10:24:56 2007 +0200
8794 ppc4xx: Update AMCC Bamboo 440EP support
8796 Changed storage type of cfg_simulate_spd_eeprom to const
8797 Changed storage type of gpio_tab to stack storage
8798 (Cannot access global data declarations in .bss until afer code relocation)
8800 Improved SDRAM tests to catch problems where data is not uniquely addressable
8801 (e.g. incorrectly programmed SDRAM row or columns)
8803 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
8804 Fixed AM29LV320DT (OpCode Flash) sector map
8806 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
8807 Signed-off-by: Stefan Roese <sr@denx.de>
8809 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
8810 Author: Stefan Roese <sr@denx.de>
8811 Date: Tue Jul 31 08:37:01 2007 +0200
8813 ppc4xx: Update 440EPx lwmon5 board support
8815 - Clear ECC status regs after ECC POST test
8816 - Set dcbz for ECC generation with caches enabled as default
8819 Signed-off-by: Stefan Roese <sr@denx.de>
8821 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
8822 Author: Stefan Roese <sr@denx.de>
8823 Date: Mon Jul 30 11:04:57 2007 +0200
8825 ppc4xx: Only print ECC related info when the error bis are set
8827 Signed-off-by: Stefan Roese <sr@denx.de>
8829 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
8830 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8831 Date: Fri Jul 27 16:44:31 2007 +0200
8833 new FPGA image for PLU405 board
8835 new FPGA image for PLU405 board with improved CompactFlash timing
8837 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8839 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
8840 Author: Rafal Jaworowski <raj@semihalf.com>
8841 Date: Fri Jul 27 14:43:59 2007 +0200
8843 [ADS5121] Support for the ADS5121 board
8845 The following MPC5121e subsystems are supported:
8847 - low-level CPU init
8848 - NOR Boot Flash (common CFI driver)
8854 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8855 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8856 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
8858 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
8859 Author: Rafal Jaworowski <raj@semihalf.com>
8860 Date: Fri Jul 27 14:22:04 2007 +0200
8862 [PPC] Remove unused MSR_USER definition
8864 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8866 commit d4024bb72dd81695ec099b2199eda0d27c623e62
8867 Author: John Otken <john@softadvances.com>
8868 Date: Thu Jul 26 17:49:11 2007 +0200
8870 ppc4xx: Add support for AMCC 405EP Taihu board
8872 Signed-off-by: John Otken <john@softadvances.com>
8874 commit b66091de6c7390620312c2501db23d8391e7cabb
8875 Author: Anatolij Gustschin <agust@denx.de>
8876 Date: Thu Jul 26 15:08:01 2007 +0200
8878 ppc4xx: lwmon5: Update Lime initialization
8880 Change Lime SDRAM initialization to now support 100MHz and
8881 133MHz (if enabled). Also the framebuffer is initialized to
8882 display a blue rectangle with a white border.
8884 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8885 Signed-off-by: Stefan Roese <sr@denx.de>
8887 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
8888 Author: Stefan Roese <sr@denx.de>
8889 Date: Tue Jul 24 09:52:52 2007 +0200
8891 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
8893 The used Intel NOR FLASH chips have internally two dies, and are now
8894 treated as two seperate chips.
8896 Signed-off-by: Stefan Roese <sr@denx.de>
8898 commit aedf5bde179ecfbd0a96130d18996a96518b785f
8899 Author: Stefan Roese <sr@denx.de>
8900 Date: Tue Jul 24 07:20:09 2007 +0200
8902 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
8904 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
8905 interrupt controller.
8907 Signed-off-by: Stefan Roese <sr@denx.de>
8909 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
8910 Author: Stefan Roese <sr@denx.de>
8911 Date: Fri Jul 20 15:03:44 2007 +0200
8913 ppc4xx: Fix bug with default GPIO output value
8915 As spotted by Matthias Fuchs, the default output values for all GPIO1
8916 outputs were not setup correctly. This patch fixes this issue.
8918 Signed-off-by: Stefan Roese <sr@denx.de>
8920 commit 531e3e8b831f357056448fa573137d5fb37000fd
8921 Author: Pavel Kolesnikov <concord@emcraft.com>
8922 Date: Fri Jul 20 15:03:03 2007 +0200
8924 POST: Add ECC POST for the lwmon5 board
8926 This patch adds ECC Post test for the Lwmon5 board based
8927 on PPC440EPx to U-Boot.
8929 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
8930 Acked-by: Yuri Tikhonov <yur@emcraft.com>
8931 Acked-by: Stefan Roese <sr@denx.de>
8933 commit cc3023b9f95d7ac959a764471a65001062aecf41
8934 Author: Rafal Jaworowski <raj@semihalf.com>
8935 Date: Thu Jul 19 17:12:28 2007 +0200
8937 Fix breakage of 8xx boards from recent commit.
8939 This patch fixes the negative consequences for 8xx of the recent
8940 "ppc4xx: Clean up 440 exceptions handling" commit.
8942 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8944 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
8945 Author: Stefan Roese <sr@denx.de>
8946 Date: Mon Jul 16 13:11:12 2007 +0200
8948 Coding style cleanup
8950 Signed-off-by: Stefan Roese <sr@denx.de>
8952 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
8953 Author: Stefan Roese <sr@denx.de>
8954 Date: Mon Jul 16 10:02:12 2007 +0200
8956 ppc4xx: Code cleanup
8958 Signed-off-by: Stefan Roese <sr@denx.de>
8960 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
8961 Author: Stefan Roese <sr@denx.de>
8962 Date: Mon Jul 16 10:01:38 2007 +0200
8964 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
8966 Signed-off-by: Stefan Roese <sr@denx.de>
8968 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
8969 Author: Stefan Roese <sr@denx.de>
8970 Date: Mon Jul 16 10:00:43 2007 +0200
8972 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
8974 The new boardspecific DDR2 controller configuration is used for the Yucca
8975 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
8977 Signed-off-by: Stefan Roese <sr@denx.de>
8979 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
8980 Author: Stefan Roese <sr@denx.de>
8981 Date: Mon Jul 16 09:57:00 2007 +0200
8983 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
8985 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
8986 support non default, boardspecific DDR(2) controller configuration.
8988 Signed-off-by: Stefan Roese <sr@denx.de>
8990 commit 5743a9207a370b90f09b20ebd61167c806b937f3
8991 Author: Stefan Roese <sr@denx.de>
8992 Date: Mon Jul 16 08:53:51 2007 +0200
8994 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
8996 The new function remove_tlb() can be used to remove the TLB's used to
8997 map a specific memory region. This is especially useful for the DDR(2)
8998 setup routines which configure the SDRAM area temporarily as a cached
8999 area (for speedup on auto-calibration and ECC generation) and later
9000 need this area uncached for normal usage.
9002 Signed-off-by: Stefan Roese <sr@denx.de>
9004 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
9005 Author: Michal Simek <monstr@monstr.eu>
9006 Date: Mon Jul 16 00:31:07 2007 +0200
9008 [PATCH] Support for Xilinx EmacLite controller
9010 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
9011 Author: Wolfgang Denk <wd@denx.de>
9012 Date: Sat Jul 14 22:51:02 2007 +0200
9016 Signed-off-by: Wolfgang Denk <wd@denx.de>
9018 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
9019 Author: Michal Simek <monstr@monstr.eu>
9020 Date: Sat Jul 14 13:11:28 2007 +0200
9022 [FIX] support for simply measuring time
9024 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
9025 Author: Michal Simek <monstr@monstr.eu>
9026 Date: Sat Jul 14 12:41:23 2007 +0200
9028 [FS] Added support for ROMFS
9030 commit 011595307731a7a67a7445d107c279d031e8ab97
9031 Author: Heiko Schocher <hs@pollux.denx.de>
9032 Date: Sat Jul 14 01:06:58 2007 +0200
9034 [PCS440EP] - fix compile error, if BUILD_DIR is used
9036 commit 5a2f1098d81ad58b309e5e558d0492643166a799
9037 Author: Michal Simek <monstr@monstr.eu>
9038 Date: Sat Jul 14 00:18:48 2007 +0200
9040 [PATCH] Support time without timer
9042 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
9043 Author: Michal Simek <monstr@monstr.eu>
9044 Date: Fri Jul 13 21:43:55 2007 +0200
9046 [PATCH] Remove problem with disabled BARREL SHIFTER
9048 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
9049 Author: Michal Simek <monstr@monstr.eu>
9050 Date: Fri Jul 13 21:41:44 2007 +0200
9052 [FIX] correct help for rspr
9054 commit fad63407154f46246ce80d53a9c669a44362ac67
9055 Author: Heiko Schocher <hs@pollux.denx.de>
9056 Date: Fri Jul 13 09:54:17 2007 +0200
9058 make show_boot_progress () weak.
9060 Signed-off-by: Heiko Schocher <hs@denx.de>
9062 commit 907902472391b6ca1876ec300687562ecaf459b1
9063 Author: Heiko Schocher <hs@pollux.denx.de>
9064 Date: Fri Jul 13 08:26:05 2007 +0200
9066 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
9067 - fix compile error, if BUILD_DIR is used
9069 Signed-off-by: Heiko Schocher <hs@denx.de>
9071 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
9072 Author: Stefan Roese <sr@denx.de>
9073 Date: Thu Jul 12 16:32:08 2007 +0200
9075 ppc4xx: Change receive buffer handling in the 4xx emac driver
9077 This change fixes a bug in the receive buffer handling, that
9078 could lead to problems upon high network traffic (broadcasts...).
9080 Signed-off-by: Stefan Roese <sr@denx.de>
9082 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
9083 Author: Wolfgang Denk <wd@denx.de>
9084 Date: Thu Jul 12 01:45:34 2007 +0200
9086 Update CHANGELOG, minor coding style cleanup.
9088 Signed-off-by: Wolfgang Denk <wd@denx.de>
9090 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
9091 Author: Andy Fleming <afleming@freescale.com>
9092 Date: Fri Jun 8 16:41:18 2007 -0500
9094 Remove erroneous errata code from Marvel 88E1111S driver
9096 The Marvel 88E1111S driver for the TSEC was copied from the
9097 88E1101 driver, and included a fix for an erratum which does not
9098 exist on that part. Now it is removed
9100 Signed-off-by: Andy Fleming <afleming@freescale.com>
9102 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
9103 Author: Andy Fleming <afleming@freescale.com>
9104 Date: Tue Jun 5 16:38:44 2007 -0500
9106 From: eran liberty <eran.liberty@gmail.com>
9108 adds the reset register to 85xx immap
9110 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
9111 Signed-off-by: Andy Fleming <afleming@freescale.com>
9113 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
9114 Author: Andy Fleming <afleming@freescale.com>
9115 Date: Thu May 10 17:50:01 2007 -0500
9117 Polished the 85xx ADS config files
9119 Made the boot commands use device trees by default.
9120 Also moved the ramdisk to 1000000 (I think the previous address
9121 was getting overridden during boot).
9123 Signed-off-by: Andy Fleming <afleming@freescale.com>
9125 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
9126 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9127 Date: Wed May 9 11:03:32 2007 -0500
9129 8544ds: Fix Makefile after moving pixis to board/freescale.
9131 The OBJTREE != SRCTREE build scenario was broken.
9134 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9135 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9137 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
9138 Author: Andy Fleming <afleming@freescale.com>
9139 Date: Wed May 9 00:54:20 2007 -0500
9141 tsec: Fix PHY code to match first driver
9143 Jarrold Wen noticed that the generic PHY code always matches
9144 under the current implementation. Change it so the first match
9145 wins, and *only* unknown PHYs trigger the generic driver
9147 Signed-off-by: Andy Fleming <afleming@freescale.com>
9149 commit ccc091aac61a38cd998d575d92f7232e256d6312
9150 Author: Andy Fleming <afleming@freescale.com>
9151 Date: Tue May 8 17:27:43 2007 -0500
9153 Add support for CPM device tree configuration to 8560 ADS
9155 * Adds code to modify CPM frequencies
9156 * Cleans up the config file to #define TSEC and (for now) #undef FCC
9157 * Adds the MII command for all 8560 ADS configurations
9158 * Updates config file to provide convenience commands for booting
9161 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
9162 Signed-off-by: Andy Fleming <afleming@freescale.com>
9164 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
9165 Author: Andy Fleming <afleming@freescale.com>
9166 Date: Tue May 8 17:23:02 2007 -0500
9168 Fix Marvell 88e1145 PHY init code
9170 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
9171 where the reset was being done after the errata code instead of
9174 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
9175 Signed-off-by: Andy Fleming <afleming@freescale.com>
9177 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
9178 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9179 Date: Wed Jul 11 14:52:16 2007 -0500
9181 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
9183 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9185 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
9186 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9187 Date: Wed Jul 11 14:52:08 2007 -0500
9189 pciauto setup bridge
9191 The P2P bridge bus numbers programmed into the device are relative to
9194 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9196 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
9197 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9198 Date: Wed Jul 11 14:52:01 2007 -0500
9200 Support PCIe extended config registers
9202 FSL PCIe block has extended cfg registers in the 100 and 400 range.
9203 For example, to read the LTSSM register: pci display <busn>.0 404 1
9205 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9207 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
9208 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9209 Date: Wed Jul 11 14:51:48 2007 -0500
9211 Minor improvements to drivers/pci_auto.c
9213 - Make pciauto_{pre,post}scan_setup_bridge non-static
9214 - Added physical address display in debug messages.
9216 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9218 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
9219 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9220 Date: Wed Jul 11 14:51:35 2007 -0500
9222 Start pci hose scan from hose->current_busno.
9224 Ensure hose->current_busno is not less than first_busno. This fixes
9225 broken board code which leaves current_busno=0 when first_busno is
9226 greater than 0 for the cases with multiple controllers.
9228 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9230 commit 3865b1fb7843a08ad49a6319a36415752276ff48
9231 Author: Stefan Roese <sr@denx.de>
9232 Date: Wed Jul 11 12:13:53 2007 +0200
9234 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
9236 Signed-off-by: Stefan Roese <sr@denx.de>
9238 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
9239 Author: Bartlomiej Sieka <tur@semihalf.com>
9240 Date: Wed Jul 11 20:11:07 2007 +0200
9242 CM1.QP1: Support for the Schindler CM1.QP1 board.
9244 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
9245 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9247 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
9248 Author: Heiko Schocher <hs@pollux.denx.de>
9249 Date: Wed Jul 11 18:39:11 2007 +0200
9251 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
9252 - now the Flash ST M29W040B is supported (not tested)
9253 - fix the "led" command
9254 - fix compile error, if BUILD_DIR is used
9256 Signed-off-by: Heiko Schocher <hs@denx.de>
9258 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
9259 Author: Stefan Roese <sr@denx.de>
9260 Date: Sun Jul 8 13:44:27 2007 +0200
9262 Fix malloc problem introduced with the relocation fixup for the PPC platform
9264 The relocation fixup didn't handle the malloc pointer initialization
9265 correctly. This patch fixes this problem. Tested successfully on 4xx.
9266 The relocation fixup patches for 4xx will follow soon.
9268 Signed-off-by: Stefan Roese <sr@denx.de>
9270 commit 0dca874db62718e41253659e60f3a1de7eb418ce
9271 Author: TsiChung <tcliew@Goku.(none)>
9272 Date: Tue Jul 10 15:45:43 2007 -0500
9274 Cache update and added CFG_UNIFY_CACHE
9276 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
9278 Signed-off-by: TsiChung <tcliew@Goku.(none)>
9280 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
9281 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9282 Date: Thu Jul 5 23:36:16 2007 -0500
9284 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
9286 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
9288 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9290 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
9291 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9292 Date: Thu Jul 5 23:31:25 2007 -0500
9296 Include immap.h and renamed mcfrtc.h to rtc.h
9298 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9300 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
9301 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9302 Date: Thu Jul 5 23:29:21 2007 -0500
9304 Add mcffec_initialize()
9306 Added mcffec_initialize() in eth_initialize()
9308 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9310 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
9311 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9312 Date: Thu Jul 5 23:27:40 2007 -0500
9314 Update header file and clean up
9318 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9320 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
9321 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9322 Date: Thu Jul 5 23:23:15 2007 -0500
9324 New uart structure and defines
9326 Seperated from mcfuart.h
9328 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9330 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
9331 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9332 Date: Thu Jul 5 23:22:31 2007 -0500
9334 New timer structure and defines
9336 Seperated from mcftimer.h
9338 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9340 commit e04acb2eba4782489417240eff76e20e176aec10
9341 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9342 Date: Thu Jul 5 23:21:09 2007 -0500
9344 Rename mcfrtc to rtc
9346 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
9348 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9350 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
9351 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9352 Date: Thu Jul 5 23:17:36 2007 -0500
9354 Rename mcfserial.c. Update include header
9356 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
9358 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9360 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
9361 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9362 Date: Thu Jul 5 23:13:58 2007 -0500
9364 Header file update, clean up and cache handling
9366 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
9368 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9370 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
9371 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9372 Date: Thu Jul 5 23:10:40 2007 -0500
9374 Create interrupts.c and modify Makefile
9376 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
9378 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9380 commit ddd104f1ed655eda50c06ba636237a83ed943f34
9381 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9382 Date: Thu Jul 5 23:06:55 2007 -0500
9386 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9388 commit b9bf3de377b2bae70c983c9b97feae914999e735
9389 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9390 Date: Thu Jul 5 23:05:31 2007 -0500
9392 Update header file and some clean up
9394 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
9396 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9398 commit 84a015b52ec820a5ae173717d78516de731c89c2
9399 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9400 Date: Thu Jul 5 23:03:28 2007 -0500
9402 Update header file and enable icache
9404 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
9406 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9408 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
9409 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9410 Date: Thu Jul 5 23:01:22 2007 -0500
9412 Update header file and removed interrupt_init()
9414 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
9416 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9418 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
9419 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9420 Date: Thu Jul 5 22:57:46 2007 -0500
9422 Update for flash.o and mii.o
9424 Removed flash.o and added mii.o
9426 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9428 commit c5ded275d839e4ff79f41718d50a835d989f57bc
9429 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9430 Date: Thu Jul 5 22:56:19 2007 -0500
9432 MII functions calls.
9434 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9436 commit 427c814104560e29bda14955c67703245aaaa5b4
9437 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9438 Date: Thu Jul 5 22:54:42 2007 -0500
9440 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
9442 The removed MII routines will be placed in mii.c.
9444 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9446 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
9447 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9448 Date: Thu Jul 5 22:51:05 2007 -0500
9452 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
9454 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9456 commit 2744354a8437b8f78db178e30660215688bff570
9457 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9458 Date: Thu Jul 5 22:46:38 2007 -0500
9460 Seperate old structure defines and new structure defines
9462 Removed new uart structure and defines to uart.h
9464 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9466 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
9467 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9468 Date: Thu Jul 5 22:45:01 2007 -0500
9470 Seperate old structure defines and new structure defines
9472 New timer structure and defines will move to new timer.h
9474 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9476 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
9477 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9478 Date: Thu Jul 5 22:42:23 2007 -0500
9484 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9486 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
9487 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9488 Date: Thu Jul 5 22:41:24 2007 -0500
9492 Replaced whitespace with tabs
9494 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9496 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
9497 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9498 Date: Thu Jul 5 22:39:07 2007 -0500
9500 Create new header file and move peripherals base address from configs file to new header file.
9502 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
9504 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9506 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
9507 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9508 Date: Thu Jul 5 22:24:58 2007 -0500
9512 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
9514 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9516 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
9517 Author: Jon Loeliger <jdl@freescale.com>
9518 Date: Tue Jul 10 11:19:50 2007 -0500
9520 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
9522 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9523 Those always evaluated TRUE, and thus were always compiled
9524 even when IDE really wasn't defined/wanted.
9526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9528 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
9529 Author: Jon Loeliger <jdl@freescale.com>
9530 Date: Tue Jul 10 11:13:21 2007 -0500
9532 drivers/: Remove lingering references to CFG_CMD_* symbols.
9534 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9535 Those always evaluated TRUE, and thus were always compiled
9536 even when IDE really wasn't defined/wanted.
9538 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9540 commit f40a7f3e3888b42a43674b099e5470022c8c544c
9541 Author: Jon Loeliger <jdl@freescale.com>
9542 Date: Tue Jul 10 11:07:56 2007 -0500
9544 fs/: Remove lingering references to CFG_CMD_* symbols.
9546 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9547 Those always evaluated TRUE, and thus were always compiled
9548 even when IDE really wasn't defined/wanted.
9550 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9552 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
9553 Author: Jon Loeliger <jdl@freescale.com>
9554 Date: Tue Jul 10 11:05:02 2007 -0500
9556 net/: Remove lingering references to CFG_CMD_* symbols.
9558 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9559 Those always evaluated TRUE, and thus were always compiled
9560 even when IDE really wasn't defined/wanted.
9562 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9564 commit 902531788376046da212afd1661cffb62f3daa1c
9565 Author: Jon Loeliger <jdl@freescale.com>
9566 Date: Tue Jul 10 11:02:44 2007 -0500
9568 common/: Remove lingering references to CFG_CMD_* symbols.
9570 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9571 Those always evaluated TRUE, and thus were always compiled
9572 even when IDE really wasn't defined/wanted.
9574 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9576 commit d39b57415838c73fb0a37eca84de3c68ba990586
9577 Author: Jon Loeliger <jdl@freescale.com>
9578 Date: Tue Jul 10 10:48:22 2007 -0500
9580 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
9582 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9583 Those always evaluated TRUE, and thus were always compiled
9584 even when IDE really wasn't defined/wanted.
9586 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9588 commit 77a318545d57aefa844752465b94c7e09a3f26d0
9589 Author: Jon Loeliger <jdl@freescale.com>
9590 Date: Tue Jul 10 10:39:10 2007 -0500
9592 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
9594 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
9595 Those always evaluated TRUE, and thus were always compiled
9596 even when IDE really wasn't defined/wanted.
9598 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9600 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
9601 Author: Jon Loeliger <jdl@freescale.com>
9602 Date: Tue Jul 10 10:27:39 2007 -0500
9604 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
9606 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9608 commit 079a136c3588814784561d6e4856970ee82d6e2a
9609 Author: Jon Loeliger <jdl@freescale.com>
9610 Date: Tue Jul 10 10:12:10 2007 -0500
9612 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
9614 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9615 used to be included but CONFIG_BOOTP_MASK was not defined.
9617 Remove lingering references to CFG_CMD_* symbols.
9619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9621 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
9622 Author: Jon Loeliger <jdl@freescale.com>
9623 Date: Tue Jul 10 09:38:02 2007 -0500
9625 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
9627 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9628 used to be included but CONFIG_BOOTP_MASK was not defined.
9630 Remove lingering references to CFG_CMD_* symbols.
9632 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9634 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
9635 Author: Jon Loeliger <jdl@freescale.com>
9636 Date: Tue Jul 10 09:29:01 2007 -0500
9638 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
9640 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9641 used to be included but CONFIG_BOOTP_MASK was not defined.
9643 Remove lingering references to CFG_CMD_* symbols.
9645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9647 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
9648 Author: Jon Loeliger <jdl@freescale.com>
9649 Date: Tue Jul 10 09:22:23 2007 -0500
9651 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
9653 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9654 used to be included but CONFIG_BOOTP_MASK was not defined.
9656 Remove lingering references to CFG_CMD_* symbols.
9658 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9660 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
9661 Author: Jon Loeliger <jdl@freescale.com>
9662 Date: Tue Jul 10 09:10:49 2007 -0500
9664 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
9666 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9667 used to be included but CONFIG_BOOTP_MASK was not defined.
9669 Remove lingering references to CFG_CMD_* symbols.
9671 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9673 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
9674 Author: Jon Loeliger <jdl@freescale.com>
9675 Date: Tue Jul 10 09:02:57 2007 -0500
9677 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
9679 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
9680 used to be included but CONFIG_BOOTP_MASK was not defined.
9682 Remove lingering references to CFG_CMD_* symbols.
9684 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9686 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
9687 Author: Jon Loeliger <jdl@freescale.com>
9688 Date: Mon Jul 9 22:08:34 2007 -0500
9690 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
9692 All of the choices for CONFIG_BOOTP_ are now documented in
9693 the README file. You must now individually select exactly
9694 the set that you want using a series of
9695 #define CONFIG_BOOTP_<x>
9696 statements in the board port config files now.
9698 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9700 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
9701 Author: Jon Loeliger <jdl@freescale.com>
9702 Date: Mon Jul 9 21:57:31 2007 -0500
9704 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9706 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9708 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
9709 Author: Jon Loeliger <jdl@freescale.com>
9710 Date: Mon Jul 9 21:48:26 2007 -0500
9712 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9714 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9716 commit 37d4bb70586659dedef1658ce1bed071be098aec
9717 Author: Jon Loeliger <jdl@freescale.com>
9718 Date: Mon Jul 9 21:38:02 2007 -0500
9720 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9722 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9724 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
9725 Author: Jon Loeliger <jdl@freescale.com>
9726 Date: Mon Jul 9 21:31:24 2007 -0500
9728 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9730 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9732 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
9733 Author: Jon Loeliger <jdl@freescale.com>
9734 Date: Mon Jul 9 21:24:19 2007 -0500
9736 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9738 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9740 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
9741 Author: Jon Loeliger <jdl@freescale.com>
9742 Date: Mon Jul 9 21:16:53 2007 -0500
9744 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
9746 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9748 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
9749 Author: Jon Loeliger <jdl@freescale.com>
9750 Date: Mon Jul 9 19:12:30 2007 -0500
9752 Retire CONFIG_COMMANDS finally.
9753 Strip old CFG_CMD_* symbols out.
9755 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9757 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
9758 Author: Jon Loeliger <jdl@freescale.com>
9759 Date: Mon Jul 9 19:10:03 2007 -0500
9761 Update README.* to reference new CONFIG_CMD_* names now.
9763 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9765 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
9766 Author: Jon Loeliger <jdl@freescale.com>
9767 Date: Mon Jul 9 19:06:00 2007 -0500
9769 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
9771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9773 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
9774 Author: Jon Loeliger <jdl@freescale.com>
9775 Date: Mon Jul 9 18:57:22 2007 -0500
9777 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
9779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9781 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
9782 Author: Jon Loeliger <jdl@freescale.com>
9783 Date: Mon Jul 9 18:45:16 2007 -0500
9785 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
9787 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9789 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
9790 Author: Jon Loeliger <jdl@freescale.com>
9791 Date: Mon Jul 9 18:38:39 2007 -0500
9793 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
9795 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9797 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
9798 Author: Jon Loeliger <jdl@freescale.com>
9799 Date: Mon Jul 9 18:31:28 2007 -0500
9801 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
9803 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9805 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
9806 Author: Jon Loeliger <jdl@freescale.com>
9807 Date: Mon Jul 9 18:24:55 2007 -0500
9809 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
9811 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9813 commit fcec2eb93e126400009729328e797f12bc94f1fd
9814 Author: Jon Loeliger <jdl@freescale.com>
9815 Date: Mon Jul 9 18:19:09 2007 -0500
9817 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
9819 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9821 commit a593814f2be0c9cdc3133cd550b167b8a988328f
9822 Author: Jon Loeliger <jdl@freescale.com>
9823 Date: Mon Jul 9 18:10:50 2007 -0500
9825 rtc/: Remove obsolete references to CONFIG_COMMANDS
9827 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9829 commit 67350568f9d46e66c21829f3513b3db0caeb948b
9830 Author: Jon Loeliger <jdl@freescale.com>
9831 Date: Mon Jul 9 18:05:38 2007 -0500
9833 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
9835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9837 commit 7def6b34f910f08d7ef0a14646da067719237ca2
9838 Author: Jon Loeliger <jdl@freescale.com>
9839 Date: Mon Jul 9 18:02:11 2007 -0500
9841 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
9843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9845 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
9846 Author: Jon Loeliger <jdl@freescale.com>
9847 Date: Mon Jul 9 17:56:50 2007 -0500
9849 fs/: Remove obsolete references to CONFIG_COMMANDS
9851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9853 commit c91898bbc505aff3e12a807af88e76da18efb7ee
9854 Author: Jon Loeliger <jdl@freescale.com>
9855 Date: Mon Jul 9 17:46:09 2007 -0500
9857 tools/: Remove obsolete references to CONFIG_COMMANDS
9859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9861 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
9862 Author: Jon Loeliger <jdl@freescale.com>
9863 Date: Mon Jul 9 17:45:14 2007 -0500
9865 net/: Remove obsolete references to CONFIG_COMMANDS
9867 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9869 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
9870 Author: Jon Loeliger <jdl@freescale.com>
9871 Date: Mon Jul 9 17:39:42 2007 -0500
9873 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
9875 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9877 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
9878 Author: Jon Loeliger <jdl@freescale.com>
9879 Date: Mon Jul 9 17:30:01 2007 -0500
9881 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
9883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9885 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
9886 Author: Jon Loeliger <jdl@freescale.com>
9887 Date: Mon Jul 9 17:22:37 2007 -0500
9889 disk/: Remove obsolete references to CONFIG_COMMANDS
9891 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9893 commit 639221c76c88215bd55af83ad174fc30d1940f8f
9894 Author: Jon Loeliger <jdl@freescale.com>
9895 Date: Mon Jul 9 17:15:49 2007 -0500
9897 include/: Remove obsolete references to CONFIG_COMMANDS
9898 Mostly removed from comments here.
9900 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9902 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
9903 Author: Wolfgang Denk <wd@denx.de>
9904 Date: Tue Jul 10 00:01:28 2007 +0200
9906 Coding style cleanup; update CHANGELOG.
9908 Signed-off-by: Wolfgang Denk <wd@denx.de>
9910 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
9911 Author: Stefan Roese <sr@denx.de>
9912 Date: Mon Jul 9 11:00:24 2007 +0200
9914 Small coding style cleanup
9916 Signed-off-by: Stefan Roese <sr@denx.de>
9918 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
9919 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9920 Date: Mon Jul 9 10:10:08 2007 +0200
9922 Migrate esd 405EP boards to new NAND subsystem
9924 Remove unused CFG_NAND_LEGACY define
9926 These boards to not have NAND.
9928 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9930 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
9931 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9932 Date: Mon Jul 9 10:10:06 2007 +0200
9934 Migrate esd 405EP boards to new NAND subsystem
9936 Migrate esd 405EP boards to new NAND subsystem
9939 -use correct io accessors (in/out_be32())
9941 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9943 commit e09f7ab5749c345f924da272bea0521a73af5b11
9944 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9945 Date: Mon Jul 9 10:10:04 2007 +0200
9947 Migrate esd 405EP boards to new NAND subsystem
9949 This patch prepares the migration from the legacy NAND driver
9950 to U-Boot's new NAND subsystem for esd boards.
9952 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9954 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
9955 Author: Jon Loeliger <jdl@freescale.com>
9956 Date: Sun Jul 8 18:10:08 2007 -0500
9958 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
9960 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9962 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
9963 Author: Jon Loeliger <jdl@freescale.com>
9964 Date: Sun Jul 8 18:05:39 2007 -0500
9966 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
9968 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9970 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
9971 Author: Jon Loeliger <jdl@freescale.com>
9972 Date: Sun Jul 8 18:02:23 2007 -0500
9974 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
9976 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9978 commit baa26db4113679b80970ff447d91cc10217742a6
9979 Author: Jon Loeliger <jdl@freescale.com>
9980 Date: Sun Jul 8 17:51:39 2007 -0500
9982 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
9984 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9986 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
9987 Author: Jon Loeliger <jdl@freescale.com>
9988 Date: Sun Jul 8 17:02:01 2007 -0500
9990 Clear up confusion over the CMD_POST and POST_DIAG mess.
9992 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
9993 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
9994 Clear this mess up some.
9996 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9998 commit b3631487105a57ab7cbadfc26efbaf9676275018
9999 Author: Jon Loeliger <jdl@freescale.com>
10000 Date: Sun Jul 8 15:45:08 2007 -0500
10002 Remove references to the old cmd_confdefs.h include file.
10004 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10006 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
10007 Author: Jon Loeliger <jdl@freescale.com>
10008 Date: Sun Jul 8 15:42:59 2007 -0500
10010 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
10012 Use new CONFIG_CMD_* in lwmon5.h board config file.
10013 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
10015 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10017 commit a5562901661bd428f7e5feb333f796372cb81019
10018 Author: Jon Loeliger <jdl@freescale.com>
10019 Date: Sun Jul 8 15:31:57 2007 -0500
10021 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
10023 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10025 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
10026 Author: Jon Loeliger <jdl@freescale.com>
10027 Date: Sun Jul 8 15:02:44 2007 -0500
10029 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
10031 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10033 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
10034 Author: Jon Loeliger <jdl@freescale.com>
10035 Date: Sun Jul 8 15:12:40 2007 -0500
10037 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
10039 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10041 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
10042 Author: Jon Loeliger <jdl@freescale.com>
10043 Date: Sun Jul 8 14:55:07 2007 -0500
10045 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
10047 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10049 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
10050 Author: Jon Loeliger <jdl@freescale.com>
10051 Date: Sun Jul 8 14:49:44 2007 -0500
10053 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
10055 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10057 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
10058 Author: Jon Loeliger <jdl@freescale.com>
10059 Date: Sun Jul 8 14:21:43 2007 -0500
10061 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
10063 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10065 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
10066 Author: Jon Loeliger <jdl@freescale.com>
10067 Date: Sun Jul 8 14:14:17 2007 -0500
10069 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
10071 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10073 commit 348f258f24253433e4a2302a0bbceb6740a67246
10074 Author: Jon Loeliger <jdl@freescale.com>
10075 Date: Sun Jul 8 13:46:18 2007 -0500
10077 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
10079 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10081 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
10082 Author: Jon Loeliger <jdl@freescale.com>
10083 Date: Sun Jul 8 10:09:35 2007 -0500
10085 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
10087 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10089 commit 60a0876b5106b34220e459c208bbf648073306c0
10090 Author: Jon Loeliger <jdl@freescale.com>
10091 Date: Sat Jul 7 21:04:26 2007 -0500
10093 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
10095 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10097 commit dcaa71562826a2466e894c868d132509dcda8444
10098 Author: Jon Loeliger <jdl@freescale.com>
10099 Date: Sat Jul 7 20:56:05 2007 -0500
10101 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
10103 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10105 commit 3c3227f3c737502311b25b72084573901cbbf17d
10106 Author: Jon Loeliger <jdl@freescale.com>
10107 Date: Sat Jul 7 20:40:43 2007 -0500
10109 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
10111 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10113 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
10114 Author: Jon Loeliger <jdl@freescale.com>
10115 Date: Thu Jul 5 19:52:35 2007 -0500
10117 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
10119 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10121 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
10122 Author: Jon Loeliger <jdl@freescale.com>
10123 Date: Thu Jul 5 19:32:07 2007 -0500
10125 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
10127 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10129 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
10130 Author: Jon Loeliger <jdl@freescale.com>
10131 Date: Thu Jul 5 19:13:52 2007 -0500
10133 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
10135 Since ADS860.h includes "board/fads/fads.h" with ramifications
10136 on the CONFIG_COMMAND treatment, it too has to be adjusted to
10137 exclude already configured commands in this same commit.
10139 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10141 commit 10e038932f22ee80ebd53de312531e70e6590a2f
10142 Author: Thomas Knobloch <knobloch@siemens.com>
10143 Date: Fri Jul 6 14:58:39 2007 +0200
10145 [NAND] Bad block skipping for command nboot
10147 The old implementation of command nboot does not support reading the image from
10148 NAND flash with skipping of bad blocks. The patch implements a new version of
10149 the nboot command: by calling nboot.jffs2 from the u-boot command line the
10150 command will load the image from NAND flash with respect to bad blocks (by using
10151 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
10154 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
10155 Signed-off-by: Stefan Roese <sr@denx.de>
10157 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
10158 Author: Stefan Roese <sr@denx.de>
10159 Date: Fri Jul 6 12:26:51 2007 +0200
10161 ppc4xx: Update lwmon5 default environment
10163 Signed-off-by: Stefan Roese <sr@denx.de>
10165 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
10166 Author: Stefan Roese <sr@denx.de>
10167 Date: Fri Jul 6 11:48:24 2007 +0200
10169 ppc4xx: Update lwmon5 board
10171 Add unlock=yes environment variable to default variables to unlock
10172 the CFI flash by default.
10174 Signed-off-by: Stefan Roese <sr@denx.de>
10176 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
10177 Author: Stefan Roese <sr@denx.de>
10178 Date: Fri Jul 6 09:45:47 2007 +0200
10180 Fix problem with get/setdcr commands introduced by cfg patches
10182 Signed-off-by: Stefan Roese <sr@denx.de>
10184 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
10185 Author: Wolfgang Denk <wd@denx.de>
10186 Date: Fri Jul 6 02:50:19 2007 +0200
10188 Code cleanup and default config update for STC GP3 SSA board.
10190 Signed-off-by: Wolfgang Denk <wd@denx.de>
10192 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
10193 Author: Wolfgang Denk <wd@denx.de>
10194 Date: Thu Jul 5 17:56:27 2007 +0200
10196 Fixing some typos etc. introduced mainly by cfg patches.
10198 Signed-off-by: Wolfgang Denk <wd@denx.de>
10200 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
10201 Author: Wolfgang Denk <wd@denx.de>
10202 Date: Thu Jul 5 11:12:16 2007 +0200
10204 Minor coding style cleanup. Update CHANGELOG.
10206 commit dca3b3d6d6396b67e5e84af53452164923c73443
10207 Author: Jon Loeliger <jdl@jdl.com>
10208 Date: Wed Jul 4 22:33:46 2007 -0500
10210 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
10212 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10214 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
10215 Author: Jon Loeliger <jdl@jdl.com>
10216 Date: Wed Jul 4 22:33:38 2007 -0500
10218 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
10220 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10222 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
10223 Author: Jon Loeliger <jdl@jdl.com>
10224 Date: Wed Jul 4 22:33:30 2007 -0500
10226 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
10228 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10230 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
10231 Author: Jon Loeliger <jdl@jdl.com>
10232 Date: Wed Jul 4 22:33:23 2007 -0500
10234 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
10236 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10238 commit 26a34560d56a9df5bc2ae23525d9229736134757
10239 Author: Jon Loeliger <jdl@jdl.com>
10240 Date: Wed Jul 4 22:33:17 2007 -0500
10242 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
10244 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10246 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
10247 Author: Jon Loeliger <jdl@jdl.com>
10248 Date: Wed Jul 4 22:33:13 2007 -0500
10250 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
10252 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10254 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
10255 Author: Jon Loeliger <jdl@jdl.com>
10256 Date: Wed Jul 4 22:33:07 2007 -0500
10258 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
10260 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10262 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
10263 Author: Jon Loeliger <jdl@jdl.com>
10264 Date: Wed Jul 4 22:33:01 2007 -0500
10266 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
10268 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10270 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
10271 Author: Jon Loeliger <jdl@jdl.com>
10272 Date: Wed Jul 4 22:32:57 2007 -0500
10274 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
10276 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10278 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
10279 Author: Jon Loeliger <jdl@jdl.com>
10280 Date: Wed Jul 4 22:32:51 2007 -0500
10282 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
10284 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10286 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
10287 Author: Jon Loeliger <jdl@jdl.com>
10288 Date: Wed Jul 4 22:32:32 2007 -0500
10290 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
10292 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10294 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
10295 Author: Jon Loeliger <jdl@jdl.com>
10296 Date: Wed Jul 4 22:32:25 2007 -0500
10298 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
10300 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10302 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
10303 Author: Jon Loeliger <jdl@jdl.com>
10304 Date: Wed Jul 4 22:32:19 2007 -0500
10306 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
10308 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10310 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
10311 Author: Jon Loeliger <jdl@jdl.com>
10312 Date: Wed Jul 4 22:32:10 2007 -0500
10314 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
10316 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10318 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
10319 Author: Jon Loeliger <jdl@jdl.com>
10320 Date: Wed Jul 4 22:32:03 2007 -0500
10322 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
10324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10326 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
10327 Author: Jon Loeliger <jdl@jdl.com>
10328 Date: Wed Jul 4 22:31:56 2007 -0500
10330 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
10332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10334 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
10335 Author: Jon Loeliger <jdl@jdl.com>
10336 Date: Wed Jul 4 22:31:49 2007 -0500
10338 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
10340 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10342 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
10343 Author: Jon Loeliger <jdl@jdl.com>
10344 Date: Wed Jul 4 22:31:42 2007 -0500
10346 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
10348 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10350 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
10351 Author: Jon Loeliger <jdl@jdl.com>
10352 Date: Wed Jul 4 22:31:35 2007 -0500
10354 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
10356 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10358 commit d794cfefead5fc177cf4f41164e80382e9c9484a
10359 Author: Jon Loeliger <jdl@jdl.com>
10360 Date: Wed Jul 4 22:31:15 2007 -0500
10362 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
10364 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10366 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
10367 Author: Jon Loeliger <jdl@jdl.com>
10368 Date: Wed Jul 4 22:31:07 2007 -0500
10370 include/configs: Use new CONFIG_CMD_* in STx board config files.
10372 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10374 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
10375 Author: Jon Loeliger <jdl@jdl.com>
10376 Date: Wed Jul 4 22:30:58 2007 -0500
10378 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
10380 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10382 commit 2694690e285acaa34922f55f4b5ae030da60c55a
10383 Author: Jon Loeliger <jdl@jdl.com>
10384 Date: Wed Jul 4 22:30:50 2007 -0500
10386 include/configs: Use new CONFIG_CMD_* in TQM board config files.
10388 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10390 commit 1cc4c458329765b58e584a19821e796b3c10e976
10391 Author: Jon Loeliger <jdl@jdl.com>
10392 Date: Wed Jul 4 22:30:28 2007 -0500
10394 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
10396 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10398 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
10399 Author: Jon Loeliger <jdl@jdl.com>
10400 Date: Wed Jul 4 22:30:06 2007 -0500
10402 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
10404 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10406 commit b44896215a09c60fa40cae906f7ed207bbc2c492
10407 Author: Sergei Poselenov <sposelenov@emcraft.com>
10408 Date: Thu Jul 5 08:17:37 2007 +0200
10410 Merged POST framework with the current TOT.
10412 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10414 commit b24629fa377214d63bb40d1360e354b6d3e4af56
10415 Author: Jon Loeliger <jdl@jdl.com>
10416 Date: Wed Jun 13 13:23:15 2007 -0500
10418 mpc86xx: Remove old CFG_CMD_* references.
10420 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10422 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
10423 Author: Jon Loeliger <jdl@jdl.com>
10424 Date: Wed Jun 13 13:22:54 2007 -0500
10426 Add MPC8568MDS to MAKEALL 85xx target.
10428 It was missing from the original port submission.
10430 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10432 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
10433 Author: Jon Loeliger <jdl@jdl.com>
10434 Date: Wed Jun 13 13:22:08 2007 -0500
10436 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
10438 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10440 commit 56b304ac2091689506088a9ae67f63fd6300cf16
10441 Author: Jon Loeliger <jdl@jdl.com>
10442 Date: Wed Jun 13 13:21:37 2007 -0500
10444 Fix #if typo in CONFIG_CMD_* changes.
10446 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10448 commit f780b83316d9af1f61d71cc88b1917b387b9b995
10449 Author: Niklaus Giger <niklausgiger@gmx.ch>
10450 Date: Wed Jun 27 18:11:38 2007 +0200
10452 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
10454 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
10456 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
10457 Author: Stefan Roese <sr@denx.de>
10458 Date: Wed Jul 4 10:06:30 2007 +0200
10460 ppc4xx: Update lwmon5 board
10462 - Add optional ECC generation routine to preserve existing
10463 RAM values. This is needed for the Linux log-buffer support
10464 - Add optional DDR2 setup with CL=4
10465 - GPIO50 not used anymore
10466 - Lime register setup added
10468 Signed-off-by: Stefan Roese <sr@denx.de>
10470 commit 6810a34677dbc446334f5e451f1682426dd33b49
10471 Author: Grant Likely <grant.likely@secretlab.ca>
10472 Date: Tue Jul 3 00:17:28 2007 -0600
10474 Fix Makefile to use $(MKCONFIG) macro for all board ports
10476 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10478 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
10479 Author: Grant Likely <grant.likely@secretlab.ca>
10480 Date: Tue Jul 3 00:17:28 2007 -0600
10482 Fix Makefile to use $(MKCONFIG) macro for all board ports
10484 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10486 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
10487 Author: Grant Likely <grant.likely@secretlab.ca>
10488 Date: Tue Jul 3 00:34:49 2007 -0600
10490 Correct fixup relocation for mpc83xx
10492 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10494 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
10495 Author: Grant Likely <grant.likely@secretlab.ca>
10496 Date: Tue Jul 3 00:34:44 2007 -0600
10498 Correct fixup relocation for mpc8260
10500 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10502 commit f3a52fe05923935db86985daf9438e2f70ac39aa
10503 Author: Grant Likely <grant.likely@secretlab.ca>
10504 Date: Tue Jul 3 00:34:39 2007 -0600
10506 Correct fixup relocation for mpc824x
10508 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10510 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
10511 Author: Grant Likely <grant.likely@secretlab.ca>
10512 Date: Tue Jul 3 00:34:34 2007 -0600
10514 Correct fixup relocation for mpc8220
10516 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10518 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
10519 Author: Grant Likely <grant.likely@secretlab.ca>
10520 Date: Tue Jul 3 00:34:29 2007 -0600
10522 Correct fixup relocation for MPC5xxx
10524 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10526 commit 3649cd99ba815b6601868735765602f00ef3692b
10527 Author: Grant Likely <grant.likely@secretlab.ca>
10528 Date: Tue Jul 3 00:34:24 2007 -0600
10530 Correct relocation fixup for mpc5xx
10532 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10534 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
10535 Author: Grant Likely <grant.likely@secretlab.ca>
10536 Date: Tue Jul 3 00:34:19 2007 -0600
10538 Don't set gd->reloc_off if relocation of .fixup works correctly
10540 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10542 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
10543 Author: Grant Likely <grant.likely@secretlab.ca>
10544 Date: Tue Jul 3 00:34:14 2007 -0600
10546 Remove obsolete mpc83xx linker scripts
10548 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10550 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
10551 Author: Grant Likely <grant.likely@secretlab.ca>
10552 Date: Tue Jul 3 00:34:09 2007 -0600
10554 Consolidate mpc8260 linker scripts
10556 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10558 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
10559 Author: Grant Likely <grant.likely@secretlab.ca>
10560 Date: Tue Jul 3 00:34:04 2007 -0600
10562 Remove obsolete mpc824x linker scripts
10564 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10566 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
10567 Author: Grant Likely <grant.likely@secretlab.ca>
10568 Date: Tue Jul 3 00:33:59 2007 -0600
10570 Remove obsolete mpc824x linker scripts (3 of 4)
10572 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10574 commit a71c084f3ac7fedf144537db2b2da47323068833
10575 Author: Grant Likely <grant.likely@secretlab.ca>
10576 Date: Tue Jul 3 00:33:53 2007 -0600
10578 Remove obsolete mpc824x linker scripts (2 of 4)
10580 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10582 commit f670a15468d1365241d40022b9408e1004181f5e
10583 Author: Grant Likely <grant.likely@secretlab.ca>
10584 Date: Tue Jul 3 00:33:48 2007 -0600
10586 Remove obsolete mpc824x linker scripts (1 of 4)
10588 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10590 commit 09555bd45a04c0e54f172528d21bc18896550d28
10591 Author: Grant Likely <grant.likely@secretlab.ca>
10592 Date: Tue Jul 3 00:33:43 2007 -0600
10594 Remove obsolete mpc8220 linker scripts
10596 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10598 commit 5efb992f046e51225c93d52f80fecbe433abd789
10599 Author: Grant Likely <grant.likely@secretlab.ca>
10600 Date: Tue Jul 3 00:33:38 2007 -0600
10602 Remove obsolete mpc5xxx linker scripts (3 of 3)
10604 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10606 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
10607 Author: Grant Likely <grant.likely@secretlab.ca>
10608 Date: Tue Jul 3 00:33:33 2007 -0600
10610 Remove obsolete mpc5xxx linker scripts (2 of 3)
10612 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10614 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
10615 Author: Grant Likely <grant.likely@secretlab.ca>
10616 Date: Tue Jul 3 00:33:28 2007 -0600
10618 Remove obsolete mpc5xxx linker scripts (1 of 3)
10620 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10622 commit b7d8e05f8675249b5f208aa73babeed384a4519d
10623 Author: Grant Likely <grant.likely@secretlab.ca>
10624 Date: Tue Jul 3 00:33:23 2007 -0600
10626 Remove obsolete mpc5xx linker scripts
10628 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10630 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
10631 Author: Grant Likely <grant.likely@secretlab.ca>
10632 Date: Tue Jul 3 00:33:18 2007 -0600
10634 Consolidate mpc83xx linker scripts
10636 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10638 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
10639 Author: Grant Likely <grant.likely@secretlab.ca>
10640 Date: Tue Jul 3 00:33:13 2007 -0600
10642 Consolidate mpc8260 linker scripts
10644 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10646 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
10647 Author: Grant Likely <grant.likely@secretlab.ca>
10648 Date: Tue Jul 3 00:33:08 2007 -0600
10650 Consolidate mpc824x linker scripts
10652 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10654 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
10655 Author: Grant Likely <grant.likely@secretlab.ca>
10656 Date: Tue Jul 3 00:33:03 2007 -0600
10658 Consolidate mpc8220 linker scripts
10660 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10662 commit d181c9a15cd41863fe24840d17848429f27d3c8c
10663 Author: Grant Likely <grant.likely@secretlab.ca>
10664 Date: Tue Jul 3 00:32:58 2007 -0600
10666 Consolidate mpc5xxx linker scripts
10668 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10670 commit 287ac924adb7291bebe5086652a362a30ab28b13
10671 Author: Grant Likely <grant.likely@secretlab.ca>
10672 Date: Tue Jul 3 00:32:53 2007 -0600
10674 Consolidate mpc5xx linker scripts
10676 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10678 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
10679 Author: Wolfgang Denk <wd@denx.de>
10680 Date: Wed Jul 4 00:43:53 2007 +0200
10682 Fix a few file permission problems.
10684 Signed-off-by: Wolfgang Denk <wd@denx.de>
10686 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
10687 Author: Wolfgang Denk <wd@denx.de>
10688 Date: Wed Jul 4 00:38:38 2007 +0200
10690 Minor coding style cleanup. Rebuild CHANGELOG file.
10692 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
10693 Author: Jon Loeliger <jdl@jdl.com>
10694 Date: Mon Jun 11 19:03:44 2007 -0500
10696 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
10698 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10700 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
10701 Author: Jon Loeliger <jdl@jdl.com>
10702 Date: Mon Jun 11 19:03:39 2007 -0500
10704 README: Rewrite command line config to use CONFIG_CMD_* names.
10706 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10708 commit 72a074cec68e5bad60d63206c050974e08afd804
10709 Author: Jon Loeliger <jdl@jdl.com>
10710 Date: Mon Jun 11 19:03:34 2007 -0500
10712 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10714 This is a compatibility step that allows both the older form
10715 and the new form to co-exist for a while until the older can
10716 be removed entirely.
10718 All transformations are of the form:
10720 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10722 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10724 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10726 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
10727 Author: Jon Loeliger <jdl@jdl.com>
10728 Date: Mon Jun 11 19:03:28 2007 -0500
10730 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10732 This is a compatibility step that allows both the older form
10733 and the new form to co-exist for a while until the older can
10734 be removed entirely.
10736 All transformations are of the form:
10738 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10740 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10742 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10744 commit 9107ebe0d352420895ab69b715697bdebc8caf50
10745 Author: Jon Loeliger <jdl@jdl.com>
10746 Date: Mon Jun 11 19:03:23 2007 -0500
10748 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10750 This is a compatibility step that allows both the older form
10751 and the new form to co-exist for a while until the older can
10752 be removed entirely.
10754 All transformations are of the form:
10756 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10758 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10760 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10762 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
10763 Author: Jon Loeliger <jdl@jdl.com>
10764 Date: Mon Jun 11 19:03:19 2007 -0500
10766 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10768 This is a compatibility step that allows both the older form
10769 and the new form to co-exist for a while until the older can
10770 be removed entirely.
10772 All transformations are of the form:
10774 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10776 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10778 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10780 commit 737184114ec9c9e0ab94d6713536126073bd2472
10781 Author: Jon Loeliger <jdl@jdl.com>
10782 Date: Mon Jun 11 19:03:15 2007 -0500
10784 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10786 This is a compatibility step that allows both the older form
10787 and the new form to co-exist for a while until the older can
10788 be removed entirely.
10790 All transformations are of the form:
10792 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10794 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10796 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10798 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
10799 Author: Jon Loeliger <jdl@jdl.com>
10800 Date: Mon Jun 11 19:03:08 2007 -0500
10802 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10804 This is a compatibility step that allows both the older form
10805 and the new form to co-exist for a while until the older can
10806 be removed entirely.
10808 All transformations are of the form:
10810 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10812 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10814 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10816 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
10817 Author: Jon Loeliger <jdl@jdl.com>
10818 Date: Mon Jun 11 19:03:03 2007 -0500
10820 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10822 This is a compatibility step that allows both the older form
10823 and the new form to co-exist for a while until the older can
10824 be removed entirely.
10826 All transformations are of the form:
10828 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10830 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10832 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10834 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
10835 Author: Jon Loeliger <jdl@jdl.com>
10836 Date: Mon Jun 11 19:02:58 2007 -0500
10838 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10840 This is a compatibility step that allows both the older form
10841 and the new form to co-exist for a while until the older can
10842 be removed entirely.
10844 All transformations are of the form:
10846 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10848 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10850 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10852 commit 98b79003c21c2578206003256de4e781d6b36ca8
10853 Author: Jon Loeliger <jdl@jdl.com>
10854 Date: Mon Jun 11 19:02:53 2007 -0500
10856 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10858 This is a compatibility step that allows both the older form
10859 and the new form to co-exist for a while until the older can
10860 be removed entirely.
10862 All transformations are of the form:
10864 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10866 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10868 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10870 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
10871 Author: Jon Loeliger <jdl@jdl.com>
10872 Date: Mon Jun 11 19:02:49 2007 -0500
10874 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10876 This is a compatibility step that allows both the older form
10877 and the new form to co-exist for a while until the older can
10878 be removed entirely.
10880 All transformations are of the form:
10882 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10884 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10886 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10888 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
10889 Author: Jon Loeliger <jdl@jdl.com>
10890 Date: Mon Jun 11 19:02:34 2007 -0500
10892 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10894 This is a compatibility step that allows both the older form
10895 and the new form to co-exist for a while until the older can
10896 be removed entirely.
10898 All transformations are of the form:
10900 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10902 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10904 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10906 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
10907 Author: Jon Loeliger <jdl@jdl.com>
10908 Date: Mon Jun 11 19:02:20 2007 -0500
10910 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10912 This is a compatibility step that allows both the older form
10913 and the new form to co-exist for a while until the older can
10914 be removed entirely.
10916 All transformations are of the form:
10918 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10920 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10922 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10924 commit d5be43de93ff905c465e509d45a3164ef48d26e7
10925 Author: Jon Loeliger <jdl@jdl.com>
10926 Date: Mon Jun 11 19:02:10 2007 -0500
10928 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10930 This is a compatibility step that allows both the older form
10931 and the new form to co-exist for a while until the older can
10932 be removed entirely.
10934 All transformations are of the form:
10936 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10938 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10940 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10942 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
10943 Author: Jon Loeliger <jdl@jdl.com>
10944 Date: Mon Jun 11 19:02:05 2007 -0500
10946 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10948 This is a compatibility step that allows both the older form
10949 and the new form to co-exist for a while until the older can
10950 be removed entirely.
10952 All transformations are of the form:
10954 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10956 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10958 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10960 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
10961 Author: Jon Loeliger <jdl@jdl.com>
10962 Date: Mon Jun 11 19:01:54 2007 -0500
10964 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10966 This is a compatibility step that allows both the older form
10967 and the new form to co-exist for a while until the older can
10968 be removed entirely.
10970 All transformations are of the form:
10972 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10974 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10976 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10978 commit a76adc8142c1d956385a109e0b70f9319ede4d66
10979 Author: Jon Loeliger <jdl@jdl.com>
10980 Date: Mon Jun 11 19:01:43 2007 -0500
10982 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
10984 This is a compatibility step that allows both the older form
10985 and the new form to co-exist for a while until the older can
10986 be removed entirely.
10988 All transformations are of the form:
10990 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
10992 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
10994 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10996 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
10997 Author: Jon Loeliger <jdl@jdl.com>
10998 Date: Mon Jun 11 19:01:34 2007 -0500
11000 Introduce initial versions of new Command Config files.
11002 Derive three new files from cmd_confdefs.h:
11003 config_bootp.h - Has BOOTP related config options, not commands
11004 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
11005 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
11007 For now, include "config_bootp.h" for compatability until all
11008 users of it directly include it properly.
11010 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11012 commit 1f2a05898658900dc5717761e27abf2052e67e13
11013 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
11014 Date: Sat Jun 30 18:50:48 2007 +0200
11018 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
11020 commit a5d71e290f3673269be8eefb4ec44f53412f9461
11021 Author: Heiko Schocher <hs@pollux.denx.de>
11022 Date: Mon Jun 25 19:11:37 2007 +0200
11024 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
11026 Signed-off-by: Heiko Schocher <hs@denx.de>
11028 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
11029 Author: Niklaus Giger <niklaus.giger@nestal.com>
11030 Date: Mon Jun 25 17:03:13 2007 +0200
11032 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
11034 This patch prints the DDR status registers upon machine check
11035 interrupt on the 440EPx/GRx. This can be useful especially when
11036 ECC support is enabled.
11038 I added some small changes to the original patch from Niklaus to
11039 make it compile clean.
11041 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
11042 Signed-off-by: Stefan Roese <sr@denx.de>
11044 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
11045 Author: Niklaus Giger <niklaus.giger@nestal.com>
11046 Date: Mon Jun 25 16:50:55 2007 +0200
11048 ppc4xx: Fix O=buildir builds
11050 This patch fixes the problem to assemble cpu/ppc4xx/start.S
11051 experienced last week where building failed having specified
11052 O=../build.sequoia.
11054 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
11056 commit 466fff1a7bb5fe764a06450626f6098219f446b8
11057 Author: Stefan Roese <sr@denx.de>
11058 Date: Mon Jun 25 15:57:39 2007 +0200
11060 ppc4xx: Add pci_pre_init() for 405 boards
11062 This patch removes the CFG_PCI_PRE_INIT option completely, since
11063 it's not needed anymore with the patch from Matthias Fuchs with
11064 the "weak" pci_pre_init() implementation.
11066 Signed-off-by: Stefan Roese <sr@denx.de>
11068 commit 6f35c53166213c24a5a0e2390ed861136ff73870
11069 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11070 Date: Sun Jun 24 17:41:21 2007 +0200
11072 ppc4xx: Maintenance patch for esd's CPCI405 derivats
11074 -add pci_pre_init() for pci interrupt fixup code
11075 -disable phy sleep mode via reset_phy() function
11076 -use correct io accessors
11079 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11081 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
11082 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11083 Date: Sun Jun 24 17:23:41 2007 +0200
11085 ppc4xx: Add pci_pre_init() for 405 boards
11087 This patch adds support for calling a plattform dependant
11088 pci_pre_init() function for 405 boards. This can be used to
11089 move the current pci_405gp_fixup_irq() function into the
11092 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
11093 A default function with 'weak' attribute is used when
11094 a board specific pci_pre_init() is not implemented.
11096 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11098 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
11099 Author: Wolfgang Denk <wd@denx.de>
11100 Date: Fri Jun 22 23:59:00 2007 +0200
11102 Coding stylke cleanup; rebuild CHANGELOG
11104 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
11105 Author: Igor Lisitsin <igor@emcraft.com>
11106 Date: Wed Apr 18 14:55:19 2007 +0400
11108 Adapt log buffer code to support Linux 2.6
11110 A new environment variable, "logversion", selects the log buffer
11111 behaviour. If it is not set or set to a value other than 2, then the
11112 old, Linux 2.4.4, behaviour is selected.
11114 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
11117 commit a11e06965ec91270c51853407ff1261d3c740386
11118 Author: Igor Lisitsin <igor@emcraft.com>
11119 Date: Wed Mar 28 19:06:19 2007 +0400
11121 Extend POST support for PPC440
11123 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
11125 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
11128 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
11129 Author: Heiko Schocher <hs@pollux.denx.de>
11130 Date: Fri Jun 22 19:11:54 2007 +0200
11132 [PCS440EP] upgrade the PCS440EP board:
11133 - Show on the Status LEDs, some States of the board.
11134 - Get the MAC addresses from the EEProm
11136 - use the CF on the board.
11137 - check the U-Boot image in the Flash with a SHA1
11139 - use dynamic TLB entries generation for the SDRAM
11141 Signed-off-by: Heiko Schocher <hs@denx.de>
11143 commit 3a1f5c81b0b9557817a789bece839905581c2205
11144 Author: Stefan Roese <sr@denx.de>
11145 Date: Fri Jun 22 16:58:40 2007 +0200
11147 ppc4xx: Fix problem with extended program_tlb() funtion
11149 The recently extended program_tlb() function had a problem when
11150 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
11151 virtual address was not incremented. This patch fixes this issue
11152 and is tested on Katmai with 512MB SDRAM.
11154 Signed-off-by: Stefan Roese <sr@denx.de>
11156 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
11157 Author: Rafal Jaworowski <raj@semihalf.com>
11158 Date: Fri Jun 22 14:58:04 2007 +0200
11160 [ppc] Fix build breakage for all non-4xx PowerPC variants.
11162 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
11163 - minor 4xx cleanup
11165 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
11166 Author: Mike Frysinger <vapier@gentoo.org>
11167 Date: Fri Jun 22 10:34:12 2007 +0200
11169 [patch] add nand_init() prototype to nand.h
11171 since nand_init() is expected to be called by other parts of u-boot, there
11172 should be a prototype for it in nand.h
11174 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11175 Signed-off-by: Stefan Roese <sr@denx.de>
11177 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
11178 Author: Wolfgang Denk <wd@denx.de>
11179 Date: Wed Jun 20 18:14:24 2007 +0200
11181 Coding style cleanup. Refresh CHANGELOG.
11183 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
11184 Author: Stefan Roese <sr@denx.de>
11185 Date: Tue Jun 19 17:22:44 2007 +0200
11187 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
11189 This patch adds a board command to configure the I2C bootstrap EEPROM
11190 values. Right now 533 and 667MHz are supported for booting either via NOR
11191 or NAND FLASH. Here the usage:
11193 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
11194 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
11196 Signed-off-by: Stefan Roese <sr@denx.de>
11198 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
11199 Author: Stefan Roese <sr@denx.de>
11200 Date: Tue Jun 19 16:42:31 2007 +0200
11202 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
11204 The latest changes showed a problem with the location of the NAND-SPL
11205 image in the OCM and the init-data area (incl. cache). This patch
11206 fixes this problem.
11208 Signed-off-by: Stefan Roese <sr@denx.de>
11210 commit 86ba99e34194394052d24c04dc40d1263d29a26f
11211 Author: Stefan Roese <sr@denx.de>
11212 Date: Tue Jun 19 16:40:58 2007 +0200
11214 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
11216 Signed-off-by: Stefan Roese <sr@denx.de>
11218 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
11219 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11220 Date: Mon Jun 18 13:50:13 2007 -0500
11222 Added M5329AFEE and M5329BFEE Platforms
11224 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
11225 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
11226 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
11229 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
11230 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
11231 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
11232 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
11233 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
11234 lib_m68k/time.c, net/eth.c and rtc/Makefile
11236 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11238 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
11239 Author: Michal Simek <monstr@monstr.eu>
11240 Date: Sun Jun 17 19:04:11 2007 +0200
11242 [fix] email reparation
11244 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
11245 Author: Michal Simek <monstr@monstr.eu>
11246 Date: Sun Jun 17 19:03:21 2007 +0200
11248 [FIX] fix microblaze file permitission
11250 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
11251 Author: Stefan Roese <sr@denx.de>
11252 Date: Fri Jun 15 11:33:41 2007 +0200
11254 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
11256 Now CONFIG_440 has to be defined in all PPC440 board config files.
11258 Signed-off-by: Stefan Roese <sr@denx.de>
11260 commit efa35cf12d914d4caba942acd5a6c45f217de302
11261 Author: Grzegorz Bernacki <gjb@semihalf.com>
11262 Date: Fri Jun 15 11:19:28 2007 +0200
11264 ppc4xx: Clean up 440 exceptions handling
11266 - Introduced dedicated switches for building 440 and 405 images required
11267 for 440-specific machine instructions like 'rfmci' etc.
11269 - Exception vectors moved to the proper location (_start moved away from
11270 the critical exception handler space, which it occupied)
11272 - CriticalInput now serviced (with default handler)
11274 - MachineCheck properly serviced (added a dedicated handler and return
11277 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
11278 unhandled and those not relevant for 4xx were eliminated)
11280 - Eliminated Linux leftovers, removed dead code
11282 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
11283 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
11284 Signed-off-by: Stefan Roese <sr@denx.de>
11286 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
11287 Author: Stefan Roese <sr@denx.de>
11288 Date: Fri Jun 15 08:18:01 2007 +0200
11290 [ppc4xx] Add initial lwmon5 board support
11292 This patch adds initial support for the Liebherr lwmon5 board euqipped
11293 with an AMCC 440EPx PowerPC.
11295 Signed-off-by: Stefan Roese <sr@denx.de>
11297 commit 85f737376d5ff3d5f0d45a8b657686326d175307
11298 Author: Stefan Roese <sr@denx.de>
11299 Date: Fri Jun 15 07:39:43 2007 +0200
11301 [ppc4xx] Extend 44x GPIO setup with default output state
11303 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
11304 is extended with the default GPIO output state (level).
11306 Signed-off-by: Stefan Roese <sr@denx.de>
11308 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
11309 Author: Stefan Roese <sr@denx.de>
11310 Date: Thu Jun 14 11:14:32 2007 +0200
11312 [ppc4xx] Extend program_tlb() with virtual & physical addresses
11314 Now program_tlb() allows to program a TLB (or multiple) with
11315 different virtual and physical addresses. With this change, now one
11316 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
11317 diabled and once with caches enabled.
11319 Signed-off-by: Stefan Roese <sr@denx.de>
11321 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
11322 Author: Detlev Zundel <dzu@denx.de>
11323 Date: Wed May 23 19:02:41 2007 +0200
11325 Change 'repeatable' attribute of some commands to sensible values.
11327 Most prominently this changes 'erase' to be non-repeatable.
11329 Signed-off-by: Detlev Zundel <dzu@denx.de>
11331 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
11332 Author: Detlev Zundel <dzu@denx.de>
11333 Date: Wed May 23 18:47:48 2007 +0200
11335 Fix 'run' not to continue after interrupted command
11337 Signed-off-by: Detlev Zundel <dzu@denx.de>
11339 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
11340 Author: Jason Jin <Jason.jin@freescale.com>
11341 Date: Mon Jun 11 15:14:24 2007 +0200
11343 USB: This patch fix readl in ohci swap reg access.
11345 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
11347 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
11348 Author: Bartlomiej Sieka <tur@semihalf.com>
11349 Date: Fri Jun 8 14:52:22 2007 +0200
11351 TQM5200: Add Flat Device Tree support, update default env. accordingly.
11353 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
11354 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11356 commit 9045f33c023f698660a2e45d1b2194c0711abebc
11357 Author: Wolfgang Denk <wd@denx.de>
11358 Date: Fri Jun 8 10:24:58 2007 +0200
11360 Fix config problems on SC3 board; make ide_reset_timeout work.
11362 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
11363 Author: Benoît Monin <bmonin@adeneo.eu>
11364 Date: Fri Jun 8 09:55:24 2007 +0200
11366 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
11368 Set the correct value in GPIOx_TCR when configuring the gpio
11369 with CFG_440_GPIO_TABLE.
11371 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
11372 Signed-off-by: Stefan Roese <sr@denx.de>
11374 commit f539edc076cfe52bff919dd512ba8d7af0e22092
11375 Author: Vadim Bendebury <vbendeb@google.com>
11376 Date: Thu May 24 15:52:25 2007 -0700
11378 cosmetic changes to bcm570x driver
11380 This is a cosmetic only changes submission.
11381 It affects files relevant to bcm570x driver.
11382 the commands used to generate this change was
11385 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
11387 The BMW target (the only one using this chip so far) builds cleanly, the
11388 `before and after' generated object files for drivers/bcm570x.c and
11389 drivers/tigon3.o are identical as reported by objdump -d
11391 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
11392 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11394 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
11395 Author: Wolfgang Denk <wd@denx.de>
11396 Date: Wed Jun 6 16:26:56 2007 +0200
11398 Coding Style cleanup; generate new CHANGELOG file.
11400 Signed-off-by: Wolfgang Denk <wd@denx.de>
11402 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
11403 Author: Markus Klotzbuecher <mk@denx.de>
11404 Date: Wed Jun 6 11:49:44 2007 +0200
11406 TRAB, USB: update trab board configuration for use of generic ohci driver
11408 commit dace45acd1c1357daa9322099d07c9a9e08b0024
11409 Author: Markus Klotzbuecher <mk@denx.de>
11410 Date: Wed Jun 6 11:49:43 2007 +0200
11412 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
11414 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
11415 Author: Markus Klotzbuecher <mk@denx.de>
11416 Date: Wed Jun 6 11:49:43 2007 +0200
11418 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
11420 commit fc43be478f2aa37ce38acd85355038866e4162af
11421 Author: Markus Klotzbuecher <mk@denx.de>
11422 Date: Wed Jun 6 11:49:35 2007 +0200
11424 USB/OHCI: endianness cleanup in the generic ohci driver
11426 commit c440bfe6d6d92d66478a7e84402b31f48413617b
11427 Author: Stefan Roese <sr@denx.de>
11428 Date: Wed Jun 6 11:42:13 2007 +0200
11430 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
11432 This patch adds NAND booting support for the AMCC Acadia eval board.
11434 Please make sure to configure jumper J7 to position 2-3 when booting
11435 from NOR, and to position 1-2 when booting for NAND.
11437 I also added a board command to configure the I2C bootstrap EEPROM
11438 values. Right now only 267MHz is support for booting either via NOR
11439 or NAND FLASH. Here the usage:
11441 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
11442 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
11444 Signed-off-by: Stefan Roese <sr@denx.de>
11446 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
11447 Author: Rodolfo Giometti <giometti@linux.it>
11448 Date: Wed Jun 6 10:08:14 2007 +0200
11450 Files include/linux/byteorder/{big,little}_endian.h define
11451 __BIG_ENDIAN and __LITTLE_ENDIAN.
11453 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
11455 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
11456 Author: Zhang Wei <wei.zhang@freescale.com>
11457 Date: Wed Jun 6 10:08:14 2007 +0200
11459 Add USB PCI-OHCI, USB keyboard and event poll support to the
11460 MPC8641HPCN board config file.
11462 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
11464 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
11465 Author: Zhang Wei <wei.zhang@freescale.com>
11466 Date: Wed Jun 6 10:08:14 2007 +0200
11468 USB PCI-OHCI, interrupt pipe and usb event poll support
11470 This patch added USB PCI-OHCI chips support, interrupt pipe support
11471 and usb event poll support. For supporting the USB interrupt pipe, the
11472 globe urb_priv is moved to purb in ed struct. Now, we can process
11473 several urbs at one time. The interrupt pipe support codes are ported
11474 from Linux kernel 2.4.
11476 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
11478 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
11479 Author: Zhang Wei <wei.zhang@freescale.com>
11480 Date: Wed Jun 6 10:08:13 2007 +0200
11482 USB event poll support
11484 This patch adds USB event poll support, which could be used in usbkbd
11485 and other usb devices driver when the asynchronous interrupt
11486 processing is supported.
11488 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
11490 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
11491 Author: Rodolfo Giometti <giometti@linux.it>
11492 Date: Wed Jun 6 10:08:12 2007 +0200
11494 ISP116x: delay for crappy USB keys
11496 Using some (very) slow USB keys cause the USB host controller buffers
11497 are not ready to be read by the CPU so we need an extra delay before
11498 reading the USB storage data.
11500 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
11502 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
11503 Author: Markus Klotzbuecher <mk@denx.de>
11504 Date: Wed Jun 6 10:08:12 2007 +0200
11506 Change duplicate usb_cpu_init_fail to usb_board_init_fail
11508 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
11511 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11513 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
11514 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11515 Date: Tue Jun 5 12:30:52 2007 -0500
11517 mpc8641 image size cleanup
11519 e600 does not have a bootpg restriction.
11520 Move the version string to beginning of image at fff00000.
11521 Resetvec.S is not needed.
11522 Update flash copy instructions.
11523 Add tftpflash env variable
11525 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11528 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
11529 Author: Benoît Monin <bmonin@adeneo.eu>
11530 Date: Mon Jun 4 08:36:05 2007 +0200
11532 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
11534 The attached patch is mainly cosmetic, allowing u-boot to
11535 display the correct bootstrap option letter according to the
11538 The original patch was extended with 405EZ support by Stefan
11541 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
11542 Signed-off-by: Stefan Roese <sr@denx.de>
11544 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
11545 Author: Nikita V. Youshchenko <yoush@debian.org>
11546 Date: Wed May 23 12:45:19 2007 +0400
11548 fix compilation problem for mpc8349itx CFG_RAMBOOT
11550 Current include/configs/MPC8349ITX.h does contain some support for building
11551 image that will be started from memory (without putting in into flash).
11552 It could be triggered by building with TEXT_BASE set to a low value.
11554 However, this support is incomplete: using of low TEXT_BASE causes
11555 defining configuration macros in inconsistent way, which later leads
11556 to compilation errors. In particular. flash support is being disabled,
11557 but then flash structures get referenced.
11559 This patch fixes this, making it possible to build with low TEXT_BASE.
11561 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
11563 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11565 commit 8a364f0970de49949d635e60accf463c6443ef8c
11566 Author: Nikita V. Youshchenko <yoush@debian.org>
11567 Date: Wed May 23 12:45:25 2007 +0400
11569 add missing 'console' var to default mpc8349itx config
11571 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11573 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
11574 Author: Stefan Roese <sr@denx.de>
11575 Date: Fri Jun 1 16:18:17 2007 +0200
11577 ppc4xx: Add missing file for Bamboo NAND booting support
11579 Signed-off-by: Stefan Roese <sr@denx.de>
11581 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
11582 Author: Stefan Roese <sr@denx.de>
11583 Date: Fri Jun 1 15:58:19 2007 +0200
11585 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
11587 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
11588 suggested by AMCC it is not recommended to dynamically change the EBC
11589 speed after bootup. So we undo this change to be on the safe side.
11591 Signed-off-by: Stefan Roese <sr@denx.de>
11593 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
11594 Author: Stefan Roese <sr@denx.de>
11595 Date: Fri Jun 1 15:29:04 2007 +0200
11597 ppc4xx: Update Sequoia NAND booting support with ECC
11599 Signed-off-by: Stefan Roese <sr@denx.de>
11601 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
11602 Author: Stefan Roese <sr@denx.de>
11603 Date: Fri Jun 1 15:27:11 2007 +0200
11605 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
11607 This patch adds NAND booting support for the AMCC Bamboo eval board.
11608 Since the NAND-SPL boot image is limited to 4kbytes, this version
11609 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
11610 supported, since the setup code for I2C DIMM autodetection and
11611 configuration is too big for this NAND bootloader.
11613 Signed-off-by: Stefan Roese <sr@denx.de>
11615 commit 42be56f53c8b107868e6125c8524ae84293e95a7
11616 Author: Stefan Roese <sr@denx.de>
11617 Date: Fri Jun 1 15:23:04 2007 +0200
11619 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
11621 The U-Boot NAND booting support is now extended to support ECC
11622 upon loading of the NAND U-Boot image.
11624 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
11626 Signed-off-by: Stefan Roese <sr@denx.de>
11628 commit a471db07fbb65a841ffc9f4f112562b945230f98
11629 Author: Stefan Roese <sr@denx.de>
11630 Date: Fri Jun 1 15:19:29 2007 +0200
11632 ppc4xx: Prepare Bamboo port for NAND booting support
11634 This patch updates the "normal" Bamboo NOR booting port, so
11635 that it is compatible with the coming soon NAND booting
11638 It also enables the 2nd NAND flash on the Bamboo.
11640 Signed-off-by: Stefan Roese <sr@denx.de>
11642 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
11643 Author: Stefan Roese <sr@denx.de>
11644 Date: Fri Jun 1 15:16:58 2007 +0200
11646 ppc4xx: Update in_be32() functions and friends to latest Linux version
11648 Signed-off-by: Stefan Roese <sr@denx.de>
11650 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
11651 Author: Stefan Roese <sr@denx.de>
11652 Date: Fri Jun 1 15:15:12 2007 +0200
11654 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
11656 This patch adds hardware ECC support to the NDFC driver. It also
11657 changes the register access from using the "simple" in32/out32
11658 functions to the in_be32/out_be32 functions, which make sure
11659 that the access is correctly synced. This is the only recommended
11660 access to SoC registers in the current Linux kernel.
11662 Signed-off-by: Stefan Roese <sr@denx.de>
11664 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
11665 Author: Stefan Roese <sr@denx.de>
11666 Date: Fri Jun 1 15:12:15 2007 +0200
11668 NAND: Update nand_ecc.c to latest Linux version
11670 This patch updates the nand_ecc code to the latest Linux version.
11671 The main reason for this is the more compact code. This makes
11672 it possible to include the ECC code into the NAND bootloader
11673 image (NAND_SPL) for PPC4xx.
11675 Signed-off-by: Stefan Roese <sr@denx.de>
11677 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
11678 Author: Stefan Roese <sr@denx.de>
11679 Date: Fri Jun 1 15:09:50 2007 +0200
11681 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
11683 Signed-off-by: Stefan Roese <sr@denx.de>
11685 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
11686 Author: Stefan Roese <sr@denx.de>
11687 Date: Fri Jun 1 13:45:24 2007 +0200
11689 ppc4xx: Change Luan config file to support ECC
11691 With the updated 44x DDR2 driver the Luan board now supports
11692 ECC generation and checking.
11694 Signed-off-by: Stefan Roese <sr@denx.de>
11696 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
11697 Author: Stefan Roese <sr@denx.de>
11698 Date: Fri Jun 1 13:45:00 2007 +0200
11700 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
11702 Add config option for 180 degree advance clock control as needed
11703 for the AMCC Luan eval board.
11705 Signed-off-by: Stefan Roese <sr@denx.de>
11707 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
11708 Author: Wolfgang Denk <wd@denx.de>
11709 Date: Thu May 31 17:20:09 2007 +0200
11711 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
11713 Signed-off-by: Wolfgang Denk <wd@denx.de>
11715 commit 7049288fb1f16f1b317140226cdebd07bd416395
11716 Author: Bartlomiej Sieka <tur@semihalf.com>
11717 Date: Sun May 27 17:26:46 2007 +0200
11719 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
11721 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11723 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
11724 Author: Bartlomiej Sieka <tur@semihalf.com>
11725 Date: Sun May 27 17:06:36 2007 +0200
11727 Motion-PRO: Add support for redundant environment.
11729 Enable redundant environment, add a MTD partition for it; also add env.
11730 variable command for passing MTD partitions to the kernel command line.
11732 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11733 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11735 commit a26eabeec31746f06d309103690892805696e344
11736 Author: Bartlomiej Sieka <tur@semihalf.com>
11737 Date: Sun May 27 17:05:11 2007 +0200
11739 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
11741 Allow passing longer command line to the kernel - useful especially
11742 for passing MTD partition layout.
11744 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11745 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11747 commit 9160b96f71483a116de81c68985e8ee306d36764
11748 Author: Bartlomiej Sieka <tur@semihalf.com>
11749 Date: Sun May 27 17:04:18 2007 +0200
11751 Fix: Add missing NULL termination in strings expanded by macros parser.
11753 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11754 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11756 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
11757 Author: Bartlomiej Sieka <tur@semihalf.com>
11758 Date: Sun May 27 17:03:37 2007 +0200
11760 Motion-PRO: Update EEPROM's page write bits and write delay.
11762 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
11763 have a page write capability of two bytes", and "This device offers fast (1ms)
11764 byte write". Add 3ms of extra delay.
11766 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11767 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11769 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
11770 Author: Bartlomiej Sieka <tur@semihalf.com>
11771 Date: Sun May 27 16:58:45 2007 +0200
11773 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
11775 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
11776 networking does not function. This commit switches PHY to TX mode by clearing
11777 the FX_SEL bit of Mode Control Register. It also reverses commit
11778 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
11780 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
11781 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11783 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
11784 Author: Bartlomiej Sieka <tur@semihalf.com>
11785 Date: Sun May 27 16:57:15 2007 +0200
11787 Motion-PRO: Add support for the temperature sensor.
11789 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11790 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11792 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
11793 Author: Bartlomiej Sieka <tur@semihalf.com>
11794 Date: Sun May 27 16:55:23 2007 +0200
11796 Motion-PRO: Add displaying of CPLD revision information during boot.
11798 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
11799 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11801 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
11802 Author: Bartlomiej Sieka <tur@semihalf.com>
11803 Date: Sun May 27 16:53:43 2007 +0200
11805 MPC5xxx: Change names of defines related to IPB and PCI clocks.
11807 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
11808 them does not cause PCI or IPB clocks to run at the specified speed.
11809 Instead, they configure divisors used to calculate said clocks. This
11810 patch renames the defines according to their real function.
11812 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
11813 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11815 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
11816 Author: Bartlomiej Sieka <tur@semihalf.com>
11817 Date: Sun May 27 16:51:48 2007 +0200
11819 Motion-PRO: Add LED support.
11821 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
11822 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11823 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11825 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
11826 Author: Ulf Samuelsson <ulf@atmel.com>
11827 Date: Thu May 24 12:12:47 2007 +0200
11829 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
11831 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
11832 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
11833 Signed-off-by: Stefan Roese <sr@denx.de>
11835 commit d756894722c888d09a9fa1df8323753772d3dcce
11836 Author: Stefan Roese <sr@denx.de>
11837 Date: Thu May 24 09:49:00 2007 +0200
11839 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
11841 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
11842 fixes a small bug in the 405EZ OCM initialization. Thanks for
11845 Signed-off-by: Stefan Roese <sr@denx.de>
11847 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
11848 Author: Stefan Roese <sr@denx.de>
11849 Date: Thu May 24 08:22:09 2007 +0200
11851 ppc4xx: Update AMCC Acadia support for board revision 1.1
11853 This patch updates the Acadia (405EZ) support for the new 1.1 board
11854 revision. It also adds support for NAND FLASH via the 4xx NDFC.
11856 Please note that the jumper J7 must be in position 2-3 for this
11857 NAND support. Position 1-2 is for NAND booting only. NAND booting
11858 support will follow later.
11860 Signed-off-by: Stefan Roese <sr@denx.de>
11862 commit 822d55365bb557e084d0e33625a6dedcc866110b
11863 Author: Jon Loeliger <jdl@freescale.com>
11864 Date: Wed May 23 14:09:46 2007 -0500
11866 Add LIST_86xx MAKEALL target for PowerPC builds.
11868 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11870 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
11871 Author: Stefan Roese <sr@denx.de>
11872 Date: Tue May 22 12:48:09 2007 +0200
11874 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
11876 Signed-off-by: Stefan Roese <sr@denx.de>
11878 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
11879 Author: Stefan Roese <sr@denx.de>
11880 Date: Tue May 22 12:46:10 2007 +0200
11882 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
11884 This patch adds support for 405 PPC's to the 4xx NAND driver
11885 ndfc.c. This is in preparation for the new AMCC 405EZ.
11887 Signed-off-by: Stefan Roese <sr@denx.de>
11889 commit 10603d76767426be803dadd4fb688b97eb69481c
11890 Author: Stefan Roese <sr@denx.de>
11891 Date: Mon May 21 07:41:22 2007 +0200
11893 ppc4xx: Fix problem in 405EZ OCM initialization
11895 As spotted by Bruce Adler this patch fixes an initialization problem
11898 Signed-off-by: Stefan Roese <sr@denx.de>
11900 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
11901 Author: Peter Pearse <peter.pearse@arm.com>
11902 Date: Fri May 18 16:47:03 2007 +0100
11904 Reduce line lengths to 80 characters max.
11906 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
11907 Author: Peter Pearse <peter.pearse@arm.com>
11908 Date: Fri May 18 14:34:07 2007 +0100
11910 Makefile permissions
11912 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
11913 Author: Peter Pearse <peter.pearse@arm.com>
11914 Date: Fri May 18 14:33:11 2007 +0100
11916 Makefile permissions
11918 commit 255a3577c848706441daee0174543efe205a77f8
11919 Author: Kim Phillips <kim.phillips@freescale.com>
11920 Date: Wed May 16 16:52:19 2007 -0500
11922 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
11924 For all practical u-boot purposes, TSECs don't differ throughout the
11925 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
11927 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11929 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
11930 Author: Stefano Babic <sbabic@denx.de>
11931 Date: Wed May 16 14:49:12 2007 +0200
11933 Fix compile problem cause my Microblaze merge
11935 Signed-off-by: Stefano Babic <sbabic@denx.de>
11937 commit ada4697d0230d6da552867777f98a67ec3ba2579
11938 Author: Jeffrey Mann <mannj@embeddedplanet.com>
11939 Date: Wed May 16 13:23:10 2007 +0200
11941 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
11943 Because the Sequoia board does not boot with an EBC faster than 66MHz,
11944 the clock divider are changed after the initial boot process.
11946 This allows for maximum clocking speeds to be achieved on newer boards.
11947 Sequoia boards with 666.66 MHz processors require that the EBC divider
11948 be set to 3 in order to start the initial boot process at a slower EBC
11949 speed. After the initial boot process, the divider can be set back to 2,
11950 which will cause the boards to run at 83.333MHz. This is backward
11951 compatible with boards with 533.33 MHz processors, as these boards will
11952 already be set with an EBC divider of 2.
11954 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
11956 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
11957 Author: Wolfgang Denk <wd@denx.de>
11958 Date: Wed May 16 01:16:53 2007 +0200
11960 Minor Coding Style cleanup, update CHANGELOG.
11962 Signed-off-by: Wolfgang Denk <wd@denx.de>
11964 commit d62f64cc23a940eafe712c776b3249e4160753d1
11965 Author: Wolfgang Denk <wd@denx.de>
11966 Date: Wed May 16 00:13:33 2007 +0200
11968 Coding Style Cleanup, new CHANGELOG
11970 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
11971 Author: Wolfgang Denk <wd@denx.de>
11972 Date: Tue May 15 23:38:05 2007 +0200
11974 Minor coding style cleanup.
11976 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
11977 Author: mushtaq khan <mushtaq_k@procsys.com>
11978 Date: Fri Apr 20 14:23:02 2007 +0530
11980 Add driver for S-ATA-controller on Intel processors with South
11981 Bridge, ICH-5, ICH-6 and ICH-7.
11985 1. Code is divided in to two files. All functions, which are
11986 controller specific are kept in "drivers/ata_piix.c" file and
11987 functions, which are not controller specific, are kept in
11988 "common/cmd_sata.c" file.
11990 2. Reading and Writing from the S-ATA drive is done using PIO method.
11992 3. Driver can be configured for 48-bit addressing by defining macro
11993 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
11996 4. S-ATA read function is hooked to the File system, commands like
11997 ext2ls and ext2load file can be used. This has been tested.
11999 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
12000 controller and identifies the S-ATA drives connected to it.
12002 6. U-Boot command "sata" is added, which is used to read/write, print
12003 partition table and get info about the drives present. This I have
12004 implemented in same way as "ide" command is implemented in U-Boot.
12006 7. This driver is for S-ATA in native mode.
12008 8. This driver does not support the Native command queuing and
12011 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
12013 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
12014 Author: mushtaq khan <mushtaq_k@procsys.com>
12015 Date: Mon Apr 30 15:57:22 2007 +0530
12017 Fixes bug clearing the bss section for i386
12020 There is a bug in the code of clearing the bss section for processor
12021 i386.(File: cpu/i386/start.S)
12022 In the code, bss_start addr (starting addr of bss section) is put into
12023 the register %eax, but the code which clears the bss section refers to
12024 the addr pointed by %edi.
12026 This patch fixes this bug by putting bss_start into %edi register.
12028 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
12030 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
12031 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12032 Date: Mon Apr 30 16:47:28 2007 -0500
12034 Add support for BCM5464 Quad Phy
12036 Added support for Broadcom's BCM5464 Quad Phy
12038 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12040 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
12041 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12042 Date: Wed May 9 08:10:57 2007 +0800
12044 Search the exception table with linear algorithm
12046 Search the exception table with linear algorithm instead of
12047 bisecting algorithm.
12048 Because the exception table might be unsorted.
12050 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12052 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
12053 Author: Aubrey.Li <aubrey.adi@gmail.com>
12054 Date: Mon May 14 11:47:35 2007 +0800
12056 Fix compilation issues on MACOSX
12058 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
12059 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
12061 commit 56fd7162985c412317bbf763a225fba23c64fd31
12062 Author: Stephen Williams <steve@icarus.com>
12063 Date: Tue May 15 07:55:42 2007 -0700
12065 Fix for compile of JSE target
12067 The attached patch fixes the compile of the JSE board in the
12068 denx git as of 14 may 2007. It is an extremely simple patch,
12069 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
12071 Fix to compile JSE against 20070514 git of u-boot
12073 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
12074 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
12075 Date: Sun May 13 21:01:03 2007 +0900
12077 sh: MS7750SE support.
12079 This adds support for the Hitachi MS7750SE.
12081 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12083 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
12084 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
12085 Date: Sun May 13 20:58:00 2007 +0900
12087 sh: First support code of SuperH.
12089 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12091 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
12092 Author: Stefan Roese <sr@denx.de>
12093 Date: Fri May 11 12:01:49 2007 +0200
12095 ppc4xx: Add mtcpr/mfcpr access macros
12097 Signed-off-by: Stefan Roese <sr@denx.de>
12099 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
12100 Author: Stefan Roese <sr@denx.de>
12101 Date: Fri May 11 12:01:06 2007 +0200
12103 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
12105 Signed-off-by: Stefan Roese <sr@denx.de>
12107 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
12108 Author: Piotr Kruszynski <ppk@semihalf.com>
12109 Date: Thu May 10 16:55:52 2007 +0200
12111 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
12114 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
12115 Author: Peter Pearse <peter.pearse@arm.com>
12116 Date: Wed May 9 11:42:44 2007 +0100
12118 Add the board directory for SMN42
12120 commit 160131bf965785419626df6c388729fe0b597992
12121 Author: Peter Pearse <peter.pearse@arm.com>
12122 Date: Wed May 9 11:41:58 2007 +0100
12124 Add the files for the SMN42 board
12126 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
12127 Author: Peter Pearse <peter.pearse@arm.com>
12128 Date: Wed May 9 11:40:34 2007 +0100
12130 Remove the deleted files for the SMN42 patch
12132 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
12133 Author: Peter Pearse <peter.pearse@arm.com>
12134 Date: Wed May 9 11:37:56 2007 +0100
12136 New board SMN42 branch
12138 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
12139 Author: Peter Pearse <peter.pearse@arm.com>
12140 Date: Wed May 9 10:24:38 2007 +0100
12142 Makefile permissions
12144 commit b84289b595731e8851df46e893845cc1322c9b9b
12145 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12146 Date: Tue May 8 14:17:07 2007 -0500
12148 8641hpcn: Fix Makefile after moving pixis to board/freescale.
12150 The OBJTREE != SRCTREE build scenario was broken.
12153 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12154 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12156 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
12157 Author: Michal Simek <monstr@monstr.eu>
12158 Date: Tue May 8 15:57:43 2007 +0200
12160 add: reading special purpose registers
12162 commit 1a50f164beb065f360fbddb76029607d6b099698
12163 Author: Michal Simek <monstr@monstr.eu>
12164 Date: Tue May 8 14:52:52 2007 +0200
12166 add: Microblaze V5 exception handling
12168 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
12169 Author: Michal Simek <monstr@monstr.eu>
12170 Date: Tue May 8 14:39:11 2007 +0200
12172 add: FSL control read and write
12174 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
12175 Author: Piotr Kruszynski <ppk@semihalf.com>
12176 Date: Tue May 8 13:05:44 2007 +0200
12178 [Motion-PRO] Add support for I2C, EEPROM and RTC.
12180 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
12181 Author: Bartlomiej Sieka <tur@semihalf.com>
12182 Date: Tue May 8 10:23:56 2007 +0200
12184 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
12187 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
12188 Author: Bartlomiej Sieka <tur@semihalf.com>
12189 Date: Tue May 8 09:39:12 2007 +0200
12191 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
12192 eliminates networking problems in Linux (timeouts).
12194 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
12195 Author: Bartlomiej Sieka <tur@semihalf.com>
12196 Date: Tue May 8 09:21:57 2007 +0200
12198 [Motion-PRO] Enable Flat Device Tree support and modify default environment
12199 to allow booting of FDT-expecting kernels.
12201 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
12202 Author: Michal Simek <monstr@monstr.eu>
12203 Date: Mon May 7 23:58:31 2007 +0200
12205 new: USE_MSR_INTR support
12207 commit 008861a2f3ef2c062744d733787c7e530a1b8761
12208 Author: Bartlomiej Sieka <tur@semihalf.com>
12209 Date: Mon May 7 22:36:15 2007 +0200
12211 [MPC5xxx] There are networking problems on the Motion-PRO board with
12212 current PHY initalization code (tftp timeouts all the time). This commit
12213 temporarily disables PHY initalization sequence to make the networking
12214 operational, until a fix is found.
12216 commit abca901869c3760b6c5fecb825db6c1d91a78a93
12217 Author: Wolfgang Denk <wd@denx.de>
12218 Date: Mon May 7 22:10:36 2007 +0200
12220 Get rid of duplicated file (see include/configs/sbc8560.h instead)
12222 Signed-off-by: Wolfgang Denk <wd@denx.de>
12224 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
12225 Author: Wolfgang Denk <wd@denx.de>
12226 Date: Mon May 7 22:07:08 2007 +0200
12228 Get rid of duplicated file (see doc/README.SBC8560 instead)
12230 Signed-off-by: Wolfgang Denk <wd@denx.de>
12232 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
12233 Author: Michal Simek <monstr@monstr.eu>
12234 Date: Mon May 7 19:43:10 2007 +0200
12236 fix: read and write MSR - repair number of parameters
12238 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
12239 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12240 Date: Mon May 7 19:42:49 2007 +0200
12242 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
12244 A '3' got cut off in the formatting of the last patch to automatically
12245 change the clock speed of the system clock on sequoia board.
12247 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12248 Signed-off-by: Stefan Roese <sr@denx.de>
12250 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
12251 Author: Michal Simek <monstr@monstr.eu>
12252 Date: Mon May 7 19:33:51 2007 +0200
12254 new: fsl interrupt support
12255 FSL_Has_data is connected to INTC.
12257 commit 792032baa7d625e34c981ab6df521911bd8dc861
12258 Author: Michal Simek <monstr@monstr.eu>
12259 Date: Mon May 7 19:30:12 2007 +0200
12261 fix: interrupt handler
12264 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
12265 Author: Michal Simek <monstr@monstr.eu>
12266 Date: Mon May 7 19:25:08 2007 +0200
12268 fix: remove asm code
12270 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
12271 Author: Michal Simek <monstr@monstr.eu>
12272 Date: Mon May 7 19:12:43 2007 +0200
12274 fix: clean interrupt
12276 commit 42efed6130c8fcf7da881385b5427065d2801757
12277 Author: Michal Simek <monstr@monstr.eu>
12278 Date: Mon May 7 17:22:25 2007 +0200
12280 fix: interrupt handler for multiple sources
12282 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
12283 Author: Michal Simek <monstr@monstr.eu>
12284 Date: Mon May 7 17:11:09 2007 +0200
12286 new: add writing to msr register
12288 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
12289 Author: Markus Klotzbuecher <mk@denx.de>
12290 Date: Mon May 7 16:43:56 2007 +0200
12292 Fix an ancient CHANGELOG conflict
12294 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
12295 Author: Timur Tabi <timur@freescale.com>
12296 Date: Sat May 5 08:12:30 2007 +0200
12298 5xxx: write MAC address to mac-address and local-mac-address
12300 Some device trees have a mac-address property, some have local-mac-address,
12301 and some have both. To support all of these device trees, ftp_cpu_setup()
12302 should write the MAC address to mac-address and local-mac-address, if they
12305 Signed-off-by: Timur Tabi <timur@freescale.com>
12306 Acked-by: Grant Likely <grant.likely@secretlab.ca>
12308 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
12309 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12310 Date: Sun Apr 29 14:01:54 2007 +0200
12312 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
12314 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
12315 message. Use PVR to distinguish between the two variants, and print proper CPU
12318 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12319 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12320 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12322 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
12323 Author: Ladislav Michl <ladis@linux-mips.org>
12324 Date: Wed Apr 25 16:01:26 2007 +0200
12326 [PATCH] simplify silent console
12328 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12329 Acked-by: Stefan Roese <sr@denx.de>
12331 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
12332 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12333 Date: Mon Apr 23 15:30:39 2007 +0200
12335 [PATCH] Avoid assigning PCI resources from zero address
12337 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
12338 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
12339 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
12340 sentence about "0" being considered an invalid address) -- so, use a reasonable
12341 starting value of 0x1000 (that's what the most Linux archs are using).
12343 Alternatively, one might have fixed the calls to pci_set_region() individually
12344 (some code even seems to have taken care of this issue) but that would have
12345 been a lot more work. :-)
12347 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12348 Acked-by: Stefan Roese <sr@denx.de>
12350 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
12351 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12352 Date: Mon Apr 23 14:00:11 2007 +0200
12354 [patch] setenv(...) can delete environmentalvariables
12356 update setenv() function so that entering a NULL value for the
12357 variable's value will delete the environmental variable
12359 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12360 Acked-by: Stefan Roese <sr@denx.de>
12362 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
12363 Author: Mike Frysinger <vapier@gentoo.org>
12364 Date: Mon Apr 23 13:54:24 2007 +0200
12366 [patch] use unsigned char in smc91111 driver for mac
12368 the v_mac variable in the smc91111 driver is declared as a signed char ...
12369 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
12370 because when it gets printed out, you get a display like:
12371 0xFFFFFFE0 and that's no good
12373 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12375 commit ffc50f9bb194343c6303517a517708457a5eb6b8
12376 Author: Michal Simek <monstr@monstr.eu>
12377 Date: Sat May 5 18:54:42 2007 +0200
12379 new: FSL and MSR support #2
12381 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
12382 Author: Michal Simek <monstr@monstr.eu>
12383 Date: Sat May 5 18:27:16 2007 +0200
12385 new: FSL and MSR support
12387 commit 2f15278c2eb911c668b4fe562130b78cf554d139
12388 Author: Wolfgang Denk <wd@denx.de>
12389 Date: Sat May 5 18:23:11 2007 +0200
12391 Coding stylke cleanup; update CHANGELOG.
12393 Signed-off-by: Wolfgang Denk <wd@denx.de>
12395 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
12396 Author: Wolfgang Denk <wd@denx.de>
12397 Date: Sat May 5 18:05:02 2007 +0200
12399 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
12401 Signed-off-by: Wolfgang Denk <wd@denx.de>
12403 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
12404 Author: Wolfgang Denk <wd@denx.de>
12405 Date: Sat May 5 17:15:50 2007 +0200
12407 Make "file" command happy with some config.mk files; update CHANGELOG
12409 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
12410 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12411 Date: Sat May 5 08:32:14 2007 +0200
12413 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
12415 The AMCC Secquoia board has been changed in a new revision from using a
12416 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
12417 indicates the difference. This patch reads that bit and uses the correct
12418 clock speed for the board. This code is backward compatable will all
12419 prior boards. All prior boards will be read as 33.000.
12421 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12422 Signed-off-by: Stefan Roese <sr@denx.de>
12424 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
12425 Author: Stefan Roese <sr@denx.de>
12426 Date: Sat May 5 08:29:01 2007 +0200
12428 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
12430 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
12431 for the 4k NAND boot image so define bus_frequency to 133MHz here
12432 which is save for the refresh counter setup.
12434 Signed-off-by: Stefan Roese <sr@denx.de>
12436 commit 2f550ab976405300f5b07bf2890800840d0aa05f
12437 Author: Timur Tabi <timur@freescale.com>
12438 Date: Sat May 5 08:12:30 2007 +0200
12440 5xxx: write MAC address to mac-address and local-mac-address
12442 Some device trees have a mac-address property, some have local-mac-address,
12443 and some have both. To support all of these device trees, ftp_cpu_setup()
12444 should write the MAC address to mac-address and local-mac-address, if they
12447 Signed-off-by: Timur Tabi <timur@freescale.com>
12448 Acked-by: Grant Likely <grant.likely@secretlab.ca>
12450 commit a79886590593ba1d667c840caa4940c61639f18f
12451 Author: Thomas Knobloch <knobloch@siemens.com>
12452 Date: Sat May 5 07:04:42 2007 +0200
12454 NAND: Wrong calculation of page number in nand_block_bad()
12456 In case that there is no memory based bad block table available the
12457 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
12458 nand_block_bad() directly. When parameter 'getchip' is set to zero,
12459 nand_block_bad() will not right shift the offset to calculate the
12460 correct page number.
12462 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
12463 Signed-off-by: Stefan Roese <sr@denx.de>
12465 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
12466 Author: Wolfgang Denk <wd@denx.de>
12467 Date: Fri May 4 10:02:33 2007 +0200
12469 Fix initrd length corruption in bootm command.
12471 When using FDT Images, the length of an inital ramdisk was
12472 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
12474 Patches by Timur Tabi & Johns Daniel.
12476 Signed-off-by: Wolfgang Denk <wd@denx.de>
12478 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
12479 Author: Kim Phillips <kim.phillips@freescale.com>
12480 Date: Thu May 3 19:43:52 2007 -0500
12482 mpc83xx: fix trivial error in MAKEALL
12484 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12486 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
12487 Author: Wolfgang Denk <wd@denx.de>
12488 Date: Thu May 3 16:34:41 2007 +0200
12490 Update board configuration for STX GP3SSA board:
12492 Enable hush shell, environment in flash rather in EEPROM,
12493 more user-friendly default environment, etc.
12494 The simple EEPROM environment can be selected easily in the board
12497 Signed-off-by: Wolfgang Denk <wd@denx.de>
12499 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
12500 Author: Wolfgang Denk <wd@denx.de>
12501 Date: Tue Apr 24 14:37:49 2007 +0200
12503 Cleanup STX GP3SSA code; fix build and compile problems.
12505 commit 35171dc04e028ecacc23ad916a66295472555dbf
12506 Author: Dan Malek <dan@embeddedalley.com>
12507 Date: Fri Jan 5 09:15:34 2007 +0100
12509 Add support for STX GP3SSA (stxssa) Board
12511 Signed-off-by Dan Malek, <dan@embeddedalley.com>
12513 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
12514 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12515 Date: Wed May 2 13:31:53 2007 +0200
12517 macb: Don't restart autonegotiation if we already have link
12519 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
12520 link is already up.
12522 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12524 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
12525 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12526 Date: Wed May 2 13:22:38 2007 +0200
12528 macb: Introduce a few barriers when dealing with DMA descriptors
12530 There were a few theoretical possibilities that the compiler might
12531 optimize away DMA descriptor reads and/or writes and thus cause
12532 synchronization problems with the hardware. Insert barriers where
12533 we depend on reads/writes actually hitting memory.
12535 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12537 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
12538 Author: Andy Fleming <afleming@freescale.com>
12539 Date: Sat Feb 24 01:08:13 2007 -0600
12541 Cleaned up some 85xx PCI bugs
12543 * Cleaned up the CDS PCI Config Tables and added NULL entries to
12545 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
12546 * Fixed 85xx PCI code to assign powar region sizes based on the
12547 config values (rather than hard-coding them)
12548 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
12550 Signed-off-by: Andy Fleming <afleming@freescale.com>
12552 commit 6743105988fc44d5b0d30388c790607835aae7a6
12553 Author: Andy Fleming <afleming@freescale.com>
12554 Date: Mon Apr 23 02:54:25 2007 -0500
12556 Add support for the 8568 MDS board
12558 This included some changes to common files:
12559 * Add 8568 processor SVR to various places
12560 * Add support for setting the qe bus-frequency value in the dts
12561 * Add the 8568MDS target to the Makefile
12563 Signed-off-by: Andy Fleming <afleming@freescale.com>
12565 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
12566 Author: David Updegraff <dave@cray.com>
12567 Date: Fri Apr 20 14:34:48 2007 -0500
12569 Add support for treating unknown PHYs as generic PHYs.
12571 When bringing up u-boot on new boards, PHY support sometimes gets
12572 neglected. Most PHYs don't really need any special support,
12573 though. By adding a generic entry that always matches if nothing
12574 else does, we can provide support for "unsupported" PHYs for the
12577 The generic PHY driver supports most PHYs, including gigabit.
12579 Signed-off-by: David Updegraff <dave@cray.com>
12580 Signed-off-by: Andy Fleming <afleming@freescale.com>
12582 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
12583 Author: James Yang <James.Yang@freescale.com>
12584 Date: Wed Feb 7 15:28:04 2007 -0600
12586 Conditionalize 8641 Rev1.0 MCM workarounds
12588 Signed-off-by: James Yang <James.Yang@freescale.com>
12589 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12591 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
12592 Author: Timur Tabi <timur@freescale.com>
12593 Date: Mon Apr 30 13:59:50 2007 -0500
12595 Fix memory initialization on MPC8349E-mITX
12597 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
12598 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
12599 on some ITX boards, notably those with a revision 3.1 CPU.
12601 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
12602 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
12604 Signed-off-by: Timur Tabi <timur@freescale.com>
12605 Acked-by: Michael Benedict <MBenedict@twacs.com>
12606 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12608 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
12609 Author: Kim Phillips <kim.phillips@freescale.com>
12610 Date: Mon Apr 30 15:26:21 2007 -0500
12612 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
12614 and fix CPU: to align with Board: display text.
12616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12618 commit c1ab82669d9525998c34e802a12cad662723f22a
12619 Author: James Yang <James.Yang@freescale.com>
12620 Date: Fri Mar 16 13:02:53 2007 -0500
12622 Rewrote picos_to_clk() to avoid rounding errors.
12623 Clarified that conversion is to DRAM clocks rather than platform clocks.
12624 Made function static to spd_sdram.c.
12626 Signed-off-by: James Yang <James.Yang@freescale.com>
12627 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12629 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
12630 Author: Stefan Roese <sr@denx.de>
12631 Date: Sun Apr 29 14:13:01 2007 +0200
12633 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
12635 Signed-off-by: Stefan Roese <sr@denx.de>
12637 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
12638 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12639 Date: Sun Apr 29 14:01:54 2007 +0200
12641 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
12643 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
12644 message. Use PVR to distinguish between the two variants, and print proper CPU
12647 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
12648 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12649 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12651 commit 5c5d3242935cf3543af01142627494434834cf98
12652 Author: Kim Phillips <kim.phillips@freescale.com>
12653 Date: Wed Apr 25 12:34:38 2007 -0500
12655 mpc83xx: minor fixups for 8313rdb introduction
12657 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
12658 Author: Ladislav Michl <ladis@linux-mips.org>
12659 Date: Wed Apr 25 16:01:26 2007 +0200
12661 [PATCH] simplify silent console
12663 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12664 Acked-by: Stefan Roese <sr@denx.de>
12666 commit 144876a380f5756f57412caf74c1d6dc201dd796
12667 Author: Michal Simek <monstr@monstr.eu>
12668 Date: Tue Apr 24 23:01:02 2007 +0200
12670 [PATCH] MTD partition support, JFFS2 support
12672 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
12673 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12674 Date: Tue Apr 24 14:03:45 2007 +0200
12676 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
12678 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12680 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
12681 Author: Andy Fleming <afleming@freescale.com>
12682 Date: Mon Apr 23 02:37:47 2007 -0500
12684 Reworked 85xx speed detection code
12686 Changed the code to read the registers and calculate the clock
12687 rates, rather than using a "switch" statement.
12689 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
12691 Signed-off-by: Andy Fleming <afleming@freescale.com>
12693 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
12694 Author: Andy Fleming <afleming@freescale.com>
12695 Date: Mon Apr 23 02:24:28 2007 -0500
12697 Enable 8544 support
12699 * Add support to the Makefile
12700 * Add 8544 configuration support to the tsec driver
12701 * Add 8544 SVR numbers to processor.h
12703 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12704 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12706 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
12707 Author: Andy Fleming <afleming@freescale.com>
12708 Date: Fri Feb 23 17:12:25 2007 -0600
12710 Support 1G size on 8548
12712 e500v2 and newer cores support 1G page sizes.
12714 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12715 Signed-off-by: Andy Fleming <afleming@freescale.com>
12717 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
12718 Author: Andy Fleming <afleming@freescale.com>
12719 Date: Fri Feb 23 17:11:16 2007 -0600
12721 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
12723 The other pagesz constants use one letter to specify order of
12724 magnitude. Also change the one reference to it in mpc8548cds/init.S
12726 Signed-off-by: Andy Fleming <afleming@freescale.com>
12728 commit 1f9a318cea14272edd10d63739e2d326c90f430e
12729 Author: Andy Fleming <afleming@freescale.com>
12730 Date: Fri Feb 23 16:28:46 2007 -0600
12732 Only set ddrioovcr for 8548 rev1.
12734 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12735 Signed-off-by: Andy Fleming <afleming@freescale.com>
12737 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
12738 Author: Andy Fleming <afleming@freescale.com>
12739 Date: Sat Feb 24 01:16:45 2007 -0600
12741 Tweak DDR ECC error counter
12743 Enable single-bit error counter when memory was cleared by ddr controller.
12745 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12746 Signed-off-by: Andy Fleming <afleming@freescale.com>
12748 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
12749 Author: Timur Tabi <timur@freescale.com>
12750 Date: Mon Feb 12 13:34:55 2007 -0600
12752 85xx: write MAC address to mac-address and local-mac-address
12754 Some device trees have a mac-address property, some have local-mac-address,
12755 and some have both. To support all of these device trees, ftp_cpu_setup()
12756 should write the MAC address to mac-address and local-mac-address, if they
12759 Signed-off-by: Timur Tabi <timur@freescale.com>
12761 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
12762 Author: Andy Fleming <afleming@freescale.com>
12763 Date: Mon Apr 23 01:44:44 2007 -0500
12765 Some 85xx cpu cleanups
12767 * Cleaned up the TSR[WIS] clearing
12768 * Cleaned up DMA initialization
12770 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12772 Acked-by: Andy Fleming <afleming@freescale.com>
12774 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
12775 Author: Andy Fleming <afleming@freescale.com>
12776 Date: Mon Apr 23 01:32:22 2007 -0500
12778 Add cpu support for the 8544
12780 Recognize new SVR values, and add a few register definitions
12782 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12783 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12784 Acked-by: Andy Fleming <afleming@freescale.com>
12786 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
12787 Author: Jon Loeliger <jdl@freescale.com>
12788 Date: Wed Apr 11 16:51:02 2007 -0500
12790 Add MPC8544DS basic port board files.
12792 Add board port under new board/freescale directory
12793 structure and reuse existing PIXIS FPGA support there.
12795 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12796 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12798 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
12799 Author: Jon Loeliger <jdl@freescale.com>
12800 Date: Wed Apr 11 16:50:57 2007 -0500
12802 Add MPC8544DS main configuration file.
12804 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12805 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12807 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
12808 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12809 Date: Wed Dec 27 22:07:15 2006 +0300
12811 Fix PCI I/O space mapping on Freescale MPC85x0ADS
12813 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
12814 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
12815 describing the local address window used for the PCI I/O space accesses -- fix
12816 this and carry over the necessary changes into the MPC8560ADS code since the
12817 PCI I/O space mapping was also broken for this board (by the earlier commit
12818 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
12819 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
12821 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12823 board/mpc8540ads/init.S | 4 ++--
12824 board/mpc8560ads/init.S | 4 ++--
12825 include/configs/MPC8540ADS.h | 5 ++---
12826 include/configs/MPC8541CDS.h | 2 +-
12827 include/configs/MPC8548CDS.h | 2 +-
12828 include/configs/MPC8560ADS.h | 8 ++++----
12829 6 files changed, 12 insertions(+), 13 deletions(-)
12831 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
12832 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12833 Date: Tue Dec 5 16:42:30 2006 +0800
12835 u-boot: Fix e500 v2 core reset bug
12837 The following patch fixes the e500 v2 core reset bug.
12838 For e500 v2 core, a new reset control register is added to reset the
12841 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12843 commit 63247a5acd58032e6cf33f525bc3923b467bac88
12844 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12845 Date: Wed Dec 20 11:01:00 2006 +0800
12847 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
12849 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
12850 entry number to control the loop. This can reduce the potential risk
12851 for the 85xx processor increasing its TLB adn LAW entry number.
12853 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
12854 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12856 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
12857 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12858 Date: Mon Dec 18 17:01:04 2006 +0800
12860 u-boot: Fix the 85xxcds tsec bug
12862 Fix the 85xxcds tsec bug.
12863 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
12865 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12867 commit 7337b237ffc4aaf1b9467024fe472a880d852598
12868 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12869 Date: Fri Dec 15 14:43:31 2006 +0800
12871 u-boot: Fix CPU2 errata on MPC8548CDS board
12873 This patch apply workaround of CPU2 errata on MPC8548CDS board.
12875 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
12877 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
12878 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
12879 Date: Mon Dec 18 16:25:15 2006 +0800
12881 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
12883 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
12885 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
12887 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
12888 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
12889 Date: Thu Dec 14 14:14:55 2006 +0800
12891 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
12893 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
12895 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12897 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
12898 Author: Scott Wood <scottwood@freescale.com>
12899 Date: Mon Apr 16 14:54:15 2007 -0500
12901 mpc83xx: Add MPC8313ERDB support.
12903 Signed-off-by: Scott Wood <scottwood@freescale.com>
12905 commit 49ea3b6eafe606285ae4d5c378026153dde53200
12906 Author: Scott Wood <scottwood@freescale.com>
12907 Date: Mon Apr 16 14:34:21 2007 -0500
12909 mpc83xx: Add generic PCI setup code.
12911 Board code can now request the generic setup code rather than having to
12912 copy-and-paste it for themselves. Boards should be converted to use this
12913 once they're tested with it.
12915 Signed-off-by: Scott Wood <scottwood@freescale.com>
12917 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
12918 Author: Scott Wood <scottwood@freescale.com>
12919 Date: Mon Apr 16 14:34:19 2007 -0500
12921 mpc83xx: Add 831x support to speed.c.
12923 Signed-off-by: Scott Wood <scottwood@freescale.com>
12925 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
12926 Author: Scott Wood <scottwood@freescale.com>
12927 Date: Mon Apr 16 14:34:18 2007 -0500
12929 mpc83xx: Add 831x support to global_data.h
12931 Signed-off-by: Scott Wood <scottwood@freescale.com>
12933 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
12934 Author: Scott Wood <scottwood@freescale.com>
12935 Date: Mon Apr 16 14:34:16 2007 -0500
12937 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
12939 Rather than misleadingly define PVR_83xx as the specific type of 83xx
12940 being built for, the PVR of each core revision is defined. checkcpu() now
12941 prints the core that it detects, rather than aborting if it doesn't find
12942 what it thinks it wants.
12944 Signed-off-by: Scott Wood <scottwood@freescale.com>
12946 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
12947 Author: Scott Wood <scottwood@freescale.com>
12948 Date: Mon Apr 16 14:34:15 2007 -0500
12950 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
12952 Signed-off-by: Scott Wood <scottwood@freescale.com>
12954 commit d87c57b201b4572d16f1b642998faa00c9912b16
12955 Author: Scott Wood <scottwood@freescale.com>
12956 Date: Mon Apr 16 14:31:55 2007 -0500
12958 mpc83xx: Add register definitions for MPC831x.
12960 Signed-off-by: Scott Wood <scottwood@freescale.com>
12962 commit 7fc4c71a143be8666d70803fb25ae60379c95622
12963 Author: Stefan Roese <sr@denx.de>
12964 Date: Mon Apr 23 15:39:59 2007 +0200
12968 Signed-off-by: Stefan Roese <sr@denx.de>
12970 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
12971 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12972 Date: Mon Apr 23 15:30:39 2007 +0200
12974 [PATCH] Avoid assigning PCI resources from zero address
12976 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
12977 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
12978 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
12979 sentence about "0" being considered an invalid address) -- so, use a reasonable
12980 starting value of 0x1000 (that's what the most Linux archs are using).
12982 Alternatively, one might have fixed the calls to pci_set_region() individually
12983 (some code even seems to have taken care of this issue) but that would have
12984 been a lot more work. :-)
12986 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
12987 Acked-by: Stefan Roese <sr@denx.de>
12989 commit afb903a2eb9436baa9270ccc0c27082d86497d89
12990 Author: Jeffrey Mann <mannj@embeddedplanet.com>
12991 Date: Mon Apr 23 14:00:11 2007 +0200
12993 [patch] setenv(...) can delete environmentalvariables
12995 update setenv() function so that entering a NULL value for the
12996 variable's value will delete the environmental variable
12998 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
12999 Acked-by: Stefan Roese <sr@denx.de>
13001 commit 36f104e5caa747d568eff26b369565af57c2ffa6
13002 Author: Mike Frysinger <vapier@gentoo.org>
13003 Date: Mon Apr 23 13:54:24 2007 +0200
13005 [patch] use unsigned char in smc91111 driver for mac
13007 the v_mac variable in the smc91111 driver is declared as a signed char ...
13008 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
13009 because when it gets printed out, you get a display like:
13010 0xFFFFFFE0 and that's no good
13012 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13014 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
13015 Author: Rodolfo Giometti <giometti@enneenne.com>
13016 Date: Mon Apr 23 13:10:52 2007 +0200
13018 USB: (Another) delay for crappy USB keys.
13020 Some USB keys are slow in giving back an answer when the Root HUB
13021 enables power lines.
13023 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
13025 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
13026 Author: Stefan Roese <sr@denx.de>
13027 Date: Mon Apr 23 12:00:22 2007 +0200
13029 Remove BOARDLIBS usage completely
13031 Signed-off-by: Stefan Roese <sr@denx.de>
13033 commit 32556443840f127170e4baa8bdd5b567039f6c36
13034 Author: Michal Simek <monstr@monstr.eu>
13035 Date: Sat Apr 21 21:07:22 2007 +0200
13037 [PATCH] SystemACE support for Microblaze
13039 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
13040 Author: Michal Simek <monstr@monstr.eu>
13041 Date: Sat Apr 21 21:02:40 2007 +0200
13043 16bit read/write little endian
13045 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
13046 Author: Michal Simek <monstr@monstr.eu>
13047 Date: Sat Apr 21 20:53:31 2007 +0200
13049 Change ML401 parameters - Xilinx BSP
13051 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
13052 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13053 Date: Wed Feb 28 05:37:29 2007 -0600
13055 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
13057 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13059 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
13060 Author: Zhang Wei <wei.zhang@freescale.com>
13061 Date: Fri Jan 19 10:42:37 2007 +0800
13063 Enable LAWs for MPC8641 PCI-Ex2.
13065 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13066 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13068 commit bd7851ce1e1f140665b520026abf1042968b1102
13069 Author: Jon Loeliger <jdl@freescale.com>
13070 Date: Fri Apr 20 14:12:26 2007 -0500
13072 mpc86xx; Write MAC address to mac-address and local-mac-address
13074 Some device trees have a mac-address property, some have local-mac-address,
13075 and some have both. To support all of these device trees, ftp_cpu_setup()
13076 should write the MAC address to mac-address and local-mac-address, if they
13079 Signed-off-by: Timur Tabi <timur@freescale.com>
13080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13082 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
13083 Author: Jon Loeliger <jdl@freescale.com>
13084 Date: Fri Apr 20 14:11:38 2007 -0500
13086 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
13088 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13089 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13091 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
13092 Author: Wolfgang Denk <wd@denx.de>
13093 Date: Fri Apr 20 17:43:28 2007 +0200
13095 Cleanup compiler warnings, update CHANGELOG
13097 Signed-off-by: Wolfgang Denk <wd@denx.de>
13099 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
13100 Author: Detlev Zundel <dzu@denx.de>
13101 Date: Fri Apr 20 12:01:47 2007 +0200
13103 Fix breakage of NC650 board with respect to nand support.
13105 Signed-off-by: Detlev Zundel <dzu@denx.de>
13107 commit 39f23cd90947639ac278a18ff277ec786b5ac167
13108 Author: Domen Puncer <domen.puncer@telargo.com>
13109 Date: Fri Apr 20 11:13:16 2007 +0200
13111 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
13113 G2 core reference manual says decrementer and time base
13114 are decreasing/increasing once every 4 bus clock cycles.
13115 Lets fix it, so time in Linux won't run twice as fast
13117 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
13118 Acked-by: Grant Likely <grant.likely@secretlab.ca>
13120 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
13121 Author: Gerald Van Baren <vanbaren@cideas.com>
13122 Date: Thu Apr 19 23:14:39 2007 -0400
13124 Fix serious pointer bug with bootm and reserve map.
13126 What was suppose to be a stack variable was declared as a pointer,
13127 overwriting random memory.
13128 Also moved the libfdt.a requirement into the main Makefile. That is
13131 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
13132 Author: Stefan Roese <sr@denx.de>
13133 Date: Thu Apr 19 09:53:52 2007 +0200
13135 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
13137 Previous versions used full wait states for the chip select #1 which
13138 is connected to the Xilinix SystemACE controller on the AMCC Katmai
13139 evaluation board. This leads to really slow access and therefore low
13140 performance. This patch now sets up the chip select a lot faster
13141 resulting in much better read/write performance of the Linux driver.
13143 Signed-off-by: Stefan Roese <sr@denx.de>
13145 commit 37837828d89084879bee2f2b8c7c68d4695940df
13146 Author: Wolfgang Denk <wd@denx.de>
13147 Date: Wed Apr 18 17:49:29 2007 +0200
13149 Clenaup, update CHANGELOG
13151 Signed-off-by: Wolfgang Denk <wd@denx.de>
13153 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
13154 Author: Wolfgang Denk <wd@denx.de>
13155 Date: Wed Apr 18 17:20:58 2007 +0200
13159 Signed-off-by: Wolfgang Denk <wd@denx.de>
13161 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
13162 Author: Wolfgang Denk <wd@denx.de>
13163 Date: Wed Apr 18 17:07:26 2007 +0200
13165 Cleanup, update CHANGELOG
13167 Sigend-off-by: Wolfgang Denk <wd@denx.de>
13169 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
13170 Author: Wolfgang Denk <wd@denx.de>
13171 Date: Wed Apr 18 16:17:46 2007 +0200
13175 commit ad4eb555671d97f96dc56eab55103b1f86874b01
13176 Author: Wolfgang Denk <wd@denx.de>
13177 Date: Wed Apr 18 14:30:39 2007 +0200
13179 MCC200 board: remove warning which is obsolete after PSoC firmware changes
13181 Signed-off-by: Wolfgang Denk <wd@denx.de>
13183 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
13184 Author: Domen Puncer <domen.puncer@telargo.com>
13185 Date: Wed Apr 18 12:11:05 2007 +0200
13187 [PATCH] icecube/lite5200b: document wakeup from low-power support
13189 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
13191 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
13192 Author: Stefan Roese <sr@denx.de>
13193 Date: Wed Apr 18 12:07:47 2007 +0200
13195 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
13197 Signed-off-by: Stefan Roese <sr@denx.de>
13199 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
13200 Author: Stefan Roese <sr@denx.de>
13201 Date: Wed Apr 18 12:05:59 2007 +0200
13203 ppc4xx: Add output for bootrom location to 405EZ ports
13205 Now 405EZ ports also show upon bootup from which boot device
13206 they are configured to boot:
13208 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
13210 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
13211 Bootstrap Option E - Boot ROM Location EBC (32 bits)
13212 16 kB I-Cache 16 kB D-Cache
13213 Board: Acadia - AMCC PPC405EZ Evaluation Board
13215 Signed-off-by: Stefan Roese <sr@denx.de>
13217 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
13218 Author: Peter Pearse <peter.pearse@arm.com>
13219 Date: Tue Apr 17 13:30:33 2007 +0100
13221 Move ppearse to ARM board list
13222 Add Konstantin Kletschke for scb9328.
13223 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
13225 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
13226 Author: Domen Puncer <domen.puncer@telargo.com>
13227 Date: Mon Apr 16 14:00:13 2007 +0200
13229 [PATCH] icecube/lite5200b: wakeup from low-power support
13231 U-Boot part of Lite5200b low power mode support.
13232 Puts SDRAM out of self-refresh and transfers control to
13233 address saved at physical 0x0.
13235 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
13236 Acked-by: Grant Likely <grant.likely@secretlab.ca>
13238 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
13239 Author: Gerald Van Baren <vanbaren@cideas.com>
13240 Date: Sun Apr 15 13:54:26 2007 -0400
13242 Fix the ft_cpu_setup() property settings.
13244 Use "setter" functions instead of flags, cleaner and more flexible.
13245 It also fixes the problem noted by Timur Tabi that the ethernet MAC
13246 addresses were all being set incorrectly to the same MAC address.
13248 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
13249 Author: Gerald Van Baren <vanbaren@cideas.com>
13250 Date: Sat Apr 14 22:51:24 2007 -0400
13252 Improve the bootm command for CONFIG_OF_LIBFDT
13254 In bootm, create the "/chosen" node only if it doesn't already exist
13255 (better matches the previous behavior).
13256 Update for proper reserved memory map handling for initrd.
13258 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
13259 Author: Gerald Van Baren <vanbaren@cideas.com>
13260 Date: Sat Apr 14 22:46:41 2007 -0400
13262 Add some utilities to manipulate the reserved memory map.
13264 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
13265 Author: Wolfgang Denk <wd@denx.de>
13266 Date: Sat Apr 14 21:16:54 2007 +0200
13270 commit 8e6875183cdca91c134408d119d4abcd48ef6856
13271 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13272 Date: Sun Dec 17 18:56:46 2006 +0100
13274 AVR32: Enable MMC support
13276 Set up the portmux for the MMC interface and enable the MMC driver
13277 along with support for DOS partitions, ext2 and FAT filesystems.
13279 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13281 commit fc26c97bb6df41b4a95662c34054fe912387bf38
13282 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13283 Date: Fri Jan 20 10:03:53 2006 +0100
13287 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
13289 The AT91 ARM-based CPUs use basically the same hardware, so it should
13290 be possible to share this driver, but no effort has been made so far.
13292 Hardware documentation can be found in the AT32AP7000 data sheet,
13293 which can be downloaded from
13295 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
13297 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13299 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
13300 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13301 Date: Sun Dec 17 18:55:37 2006 +0100
13303 AVR32: Add clk and gpio infrastructure for mmci
13305 Implement functions for configuring the mmci pins, as well as
13306 functions for getting the clock rate of the mmci controller.
13308 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13310 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
13311 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13312 Date: Sun Dec 17 18:53:56 2006 +0100
13314 Enable partition support with MMC
13316 Include implementations of init_part() and get_partition_info() when
13319 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13321 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
13322 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13323 Date: Sun Dec 17 17:14:30 2006 +0100
13325 AVR32: Enable networking
13327 Implement MACB initialization for AVR32 and ATSTK1000, and turn
13328 everything on, including the MACB driver.
13330 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13332 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
13333 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13334 Date: Fri Jan 20 10:03:34 2006 +0100
13336 Atmel MACB ethernet driver
13338 Driver for the Atmel MACB on-chip ethernet controller.
13340 This driver has been tested on the ATSTK1000 board with a AT32AP7000
13341 CPU. It should probably work on AT91SAM926x as well with some minor
13344 Hardware documentation can be found in the AT32AP7000 data sheet,
13345 which can be downloaded from
13347 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
13349 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13351 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
13352 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13353 Date: Sun Dec 17 16:56:14 2006 +0100
13355 AVR32: Add clk and gpio infrastructure for macb0 and macb1
13357 Implement functions for configuring the macb0 and macb1 pins, as
13358 well as functions for getting the clock rate of the various
13359 busses the macb ethernet controllers are connected to.
13361 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13363 commit d5acb95b16a0a74c643524342c3437e765426d05
13364 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13365 Date: Sun Dec 17 15:39:15 2006 +0100
13367 AVR32: Implement simple DMA memory allocator
13369 Implement dma_alloc_coherent() which returns cache-aligned
13370 uncacheable memory.
13372 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13374 commit 91975b0fea773c9e681fea8cf3349669f27685ee
13375 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13376 Date: Sun Dec 17 15:46:02 2006 +0100
13378 Import <linux/mii.h> from the Linux kernel
13380 Instead of creating yet another set of MII register definitions
13381 in the macb driver, here's a complete set of definitions for everyone
13384 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13386 commit 1b804b229556a4d862da93c0ec94e79419364b2c
13387 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13388 Date: Wed Mar 21 19:47:36 2007 +0100
13390 AVR32: Include more commands for ATSTK1000
13392 Include the imi, imls and jffs commands sets by default on ATSTK1000.
13393 Also define CONFIG_BOOTARGS to something more useful, define
13394 CONFIG_BOOTCOMMAND and enable autoboot by default.
13396 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13398 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
13399 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13400 Date: Wed Mar 21 19:44:48 2007 +0100
13402 AVR32: Provide a definition of struct stat
13404 Copy the definition of struct stat from the Linux kernel.
13406 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13408 commit 12f099c08167a7a51aeee623bc16dafd0841271c
13409 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13410 Date: Sun Dec 17 14:46:06 2006 +0100
13412 AVR32: Use initdram() instead of board_init_memories()
13414 Conform to the "standard" interface and use initdram() instead of
13415 board_init_memories() on AVR32. This enables us to get rid of the
13416 sdram_size member of the global_data struct as well.
13418 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13420 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
13421 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13422 Date: Mon Nov 20 15:53:10 2006 +0100
13424 AVR32: Relocate u-boot to SDRAM
13426 Relocate the u-boot image into SDRAM like everyone else does. This
13427 means that we can handle much larger .data and .bss than we used to.
13429 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13431 commit df548d3c3e2bbc40258713167859ffc2ce99a900
13432 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13433 Date: Sun Nov 19 18:06:53 2006 +0100
13435 AVR32: Resource management rewrite
13437 Rewrite the resource management code (i.e. I/O memory, clock gating,
13438 gpio) so it doesn't depend on any global state. This is necessary
13439 because this code is heavily used before relocation to RAM, so we
13440 can't write to any global variables.
13442 As an added bonus, this makes u-boot's memory footprint a bit smaller,
13443 although some functionality has been left out; all clocks are enabled
13444 all the time, and there's no checking for gpio line conflicts.
13446 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13448 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
13449 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13450 Date: Sat Nov 18 18:01:13 2006 +0100
13452 AVR32: Clean up memory-map.h for at32ap7000
13454 Convert spaces to tabs (must have missed this one last time around),
13455 sort the entries by address and group them together by bus
13458 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13460 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
13461 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13462 Date: Sat Nov 18 17:32:31 2006 +0100
13464 AVR32: Build position-independent u-boot
13466 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
13467 position independent. This will make relocation a lot easier.
13469 -mno-init-got means that gcc shouldn't emit code to load the GOT
13470 address into r6 in every function prologue. We do it once and for
13471 all in the early startup assembly code, so enabling this option
13472 makes u-boot a bit faster and smaller.
13474 The assembly parts have always been position-independent, so no code
13475 changes should be necessary.
13477 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13479 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
13480 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13481 Date: Sat Nov 18 17:24:31 2006 +0100
13483 AVR32: Use avr32-linux- cross-compilation prefix by default
13485 It doesn't really matter which toolchain you use to compile u-boot,
13486 but the avr32-linux one is probably what most people have installed.
13488 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13490 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
13491 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13492 Date: Sat Nov 18 17:15:30 2006 +0100
13494 AVR32: Split start_u_boot into board_init_f and board_init_r
13496 Split the avr32 initialization code into a function to run before
13497 relocation, board_init_f and a function to run after relocation,
13498 board_init_r. For now, board_init_f simply calls board_init_r
13501 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13503 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
13504 Author: Heiko Schocher <hs@pollux.denx.de>
13505 Date: Sat Apr 14 05:26:48 2007 +0200
13507 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
13508 clear the Display after reset.
13510 Signed-off-by: Heiko Schocher <hs@denx.de>
13512 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
13513 Author: Denis Peter <d.peter@mpl.ch>
13514 Date: Fri Apr 13 09:13:33 2007 +0200
13516 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
13518 Fix bug introduced by "Fix get_partition_info() parameter error in all
13519 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
13520 to use diskboot or scsiboot form another device than 0.
13522 Signed-off-by: Denis Peter <d.peter@mpl.ch>
13524 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
13525 Author: Greg Lopp <lopp@pobox.com>
13526 Date: Fri Apr 13 08:02:24 2007 +0200
13528 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
13530 Signed-of-by: Greg Lopp <lopp@pobox.com>
13531 Acked-by: Grant Likely <grant.likely@secretlab.ca>
13533 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
13534 Author: Xie Xiaobo <r63061@freescale.com>
13535 Date: Fri Mar 9 19:08:25 2007 +0800
13537 Fix two bugs for MPC83xx DDR2 controller SPD Init
13539 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
13540 the first bug is that the picos_to_clk routine introduces a huge
13541 rounding error in 83xx.
13542 the second bug is that the mode register write recovery field is
13543 tWR-1, not tWR >> 1.
13545 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
13546 Author: Jeffrey Mann <mannj@embeddedplanet.com>
13547 Date: Thu Apr 12 14:15:59 2007 +0200
13549 ppc4xx: Fix i2c divisor calcularion for PPC4xx
13551 This patch fixes changes the i2c_init(...) function to use the function
13552 get_OPB_freq() rather than calculating the OPB speed by
13553 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
13554 specific per processor. The prior method was not and so was calculating
13555 the wrong speed for some PPC4xx processors.
13557 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
13558 Signed-off-by: Stefan Roese <sr@denx.de>
13560 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
13561 Author: Wolfgang Denk <wd@denx.de>
13562 Date: Wed Apr 11 17:25:01 2007 +0200
13566 Signed-off-by: Wolfgang Denk <wd@denx.de>
13568 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
13569 Author: Wolfgang Denk <wd@denx.de>
13570 Date: Wed Apr 11 17:22:55 2007 +0200
13572 Update for SC3 board
13574 * Make IDE timeout configurable through ide_reset_timeout variable.
13575 * Use Newline as "password" string
13576 * Use just a single partition in NAND flash
13578 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
13579 Author: Haiying Wang <haiying.wang@freescale.com>
13580 Date: Mon Jan 22 12:37:30 2007 -0600
13582 Add PIXIS FPGA support for MPC8641HPCN board.
13584 Move the 8641HPCN's PIXIS code to the new directory
13585 board/freescale/common/ as it will be shared by
13586 future boards not in the same processor family.
13588 Write a "pixis_reset" command that utilizes the FPGA
13589 reset sequencer to support alternate soft-reset options
13590 such as using the "alternate" flash bank, enabling
13591 the watch dog, or choosing different CPU frequencies.
13593 Add documentation for the pixis_reset to README.mpc8641hpcn.
13595 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
13596 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13598 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
13599 Author: Gerald Van Baren <vanbaren@cideas.com>
13600 Date: Fri Apr 6 14:19:43 2007 -0400
13602 Moved fdt command support code to fdt_support.c
13604 ...in preparation for improving the bootm command's handling of fdt blobs.
13605 Also cleaned up some coding sloppiness.
13607 commit 6679f9299534e488a171a9bb8f9bb891de247aab
13608 Author: Gerald Van Baren <vanbaren@cideas.com>
13609 Date: Fri Apr 6 14:17:14 2007 -0400
13611 libfdt: Make fdt_check_header() public
13613 Changed _fdt_check_header() to fdt_check_header() and made it part of
13614 the interface - it is a useful routine.
13616 Also did some asthetics cleanup to the include files (headers).
13618 commit c0707ce65677650b5ceab0500ee50ae5168afef2
13619 Author: Aubrey Li <aubrey.adi@gmail.com>
13620 Date: Thu Apr 5 18:34:06 2007 +0800
13622 [Blackfin][PATCH] Kill off a bunch of common local prototypes
13624 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
13625 Author: Aubrey Li <aubrey.adi@gmail.com>
13626 Date: Thu Apr 5 18:33:04 2007 +0800
13628 [Blackfin][PATCH] Fix dynamic CPLB generation issue
13630 commit 0445e3a264251d75b1be45ef713c70726a2952f0
13631 Author: Aubrey Li <aubrey.adi@gmail.com>
13632 Date: Thu Apr 5 18:31:47 2007 +0800
13634 [Blackfin][PATCH] minior cleanup
13636 commit 155fd766573981090e638b493d5857562151862e
13637 Author: Aubrey Li <aubrey.adi@gmail.com>
13638 Date: Thu Apr 5 18:31:18 2007 +0800
13640 [Blackfin][PATCH] Fix copyright and update license
13642 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
13643 Author: Aubrey Li <aubrey.adi@gmail.com>
13644 Date: Thu Apr 5 18:30:25 2007 +0800
13646 [Blackfin][PATCH] Add BF537 EMAC driver initialization
13648 commit 889256e8604e0c68db1d866d720894dffede9df6
13649 Author: Aubrey Li <aubrey.adi@gmail.com>
13650 Date: Thu Apr 5 18:29:55 2007 +0800
13652 [Blackfin][PATCH] call real the system synchronize instruction
13654 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
13655 Author: Aubrey Li <aubrey.adi@gmail.com>
13656 Date: Thu Apr 5 18:29:17 2007 +0800
13658 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
13660 commit dfeeab2cd680df047e68e723b246adf6f33bb556
13661 Author: Aubrey Li <aubrey.adi@gmail.com>
13662 Date: Thu Apr 5 18:28:34 2007 +0800
13664 [Blackfin][PATCH]: fix flash unaligned copy issue
13666 commit 443feb740584e406efa203af909fe2926608e8d5
13667 Author: Igor Marnat <marny@rambler.ru>
13668 Date: Wed Mar 21 09:55:01 2007 +0300
13670 Update usage of 'nc' in README.NetConsole
13672 Added information about usage of NetConsole on systems where the -l and -p
13673 switches are mutually exclusive.
13675 Signed-off-by: Igor Marnat <marny@rambler.ru>
13676 Signed-off-by: Ben Warren <bwarren@qstreams.com>
13678 commit 31c98a88228021b314c89ebb8104fb6473da4471
13679 Author: Wolfgang Denk <wd@denx.de>
13680 Date: Wed Apr 4 02:09:30 2007 +0200
13682 Minor coding style cleanup.
13684 commit 94abd7c0583ebe01e799b25f451201deeaab550d
13685 Author: Wolfgang Denk <wd@denx.de>
13686 Date: Wed Apr 4 01:49:15 2007 +0200
13690 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
13691 Author: Rodolfo Giometti <giometti@enneenne.com>
13692 Date: Tue Apr 3 14:27:18 2007 +0200
13694 Support for the Philips ISP116x HCD (Host Controller Driver)
13696 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
13698 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
13699 Author: Markus Klotzbuecher <mk@denx.de>
13700 Date: Tue Apr 3 14:27:08 2007 +0200
13702 USB: cleanup monahans usb support. Remove dead code.
13704 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13706 commit a65c5768e5537530bd1780af3d3fddc3113a163c
13707 Author: Stefan Roese <sr@denx.de>
13708 Date: Mon Apr 2 10:09:30 2007 +0200
13710 ppc4xx: Change SysACE address on Katmai
13712 With this new base address of the Xilinx SystemACE controller
13713 the Linux driver will be easier to adapt, since it can now be
13714 mapped via the "normal" ioremap() call.
13716 Signed-off-by: Stefan Roese <sr@denx.de>
13718 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
13719 Author: Gerald Van Baren <vanbaren@cideas.com>
13720 Date: Sat Mar 31 14:30:53 2007 -0400
13722 Fix some minor whitespace violations.
13724 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
13725 Author: Gerald Van Baren <vanbaren@cideas.com>
13726 Date: Sat Mar 31 12:23:51 2007 -0400
13728 Add a flattened device tree (fdt) command (2 of 2)
13730 Modifications to the existing code to support the new fdt command.
13732 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
13733 Author: Gerald Van Baren <vanbaren@cideas.com>
13734 Date: Sat Mar 31 12:22:10 2007 -0400
13736 Add a flattened device tree (fdt) command (1 of 2)
13738 The fdt command uses David Gibson's libfdt library to manipulate as well
13739 as print the flattened device tree. This patch is the new command,
13740 the second part is the modifications to the existing code.
13742 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
13743 Author: Gerald Van Baren <vanbaren@cideas.com>
13744 Date: Sat Mar 31 12:13:43 2007 -0400
13746 libfdt: Enhanced and published fdt_next_tag()
13748 Enhanced the formerly private function _fdt_next_tag() to allow stepping
13749 through the tree, used to produce a human-readable dump, and made
13750 it part of the published interface.
13751 Also added some comments.
13753 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
13754 Author: Gerald Van Baren <vanbaren@cideas.com>
13755 Date: Sat Mar 31 12:05:39 2007 -0400
13757 libfdt: Customizations for use by u-boot.
13759 Changes to David Gibson's original source to fit into u-boot's
13760 environment. No functionality changes.
13762 commit 35748177c64a4a83a00057e93bb33e40278a2a96
13763 Author: Gerald Van Baren <vanbaren@cideas.com>
13764 Date: Sat Mar 31 12:00:56 2007 -0400
13766 libfdt: Import libfdt source (2 of 2)
13768 This adds the applicable libfdt source files (unmodified) and a README
13769 to explain where the source came from.
13771 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
13772 Author: Gerald Van Baren <vanbaren@cideas.com>
13773 Date: Sat Mar 31 11:59:59 2007 -0400
13775 libfdt: Import libfdt source (1 of 2)
13777 This adds the applicable libfdt source files (unmodified) and a README
13778 to explain where the source came from.
13780 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
13781 Author: Stefan Roese <sr@denx.de>
13782 Date: Sat Mar 31 13:16:23 2007 +0200
13784 ppc4xx: Update Katmai bootstrap command
13786 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
13789 Signed-off-by: Stefan Roese <sr@denx.de>
13791 commit cabee756a6532986729477c3cc1ea16ef8517ad2
13792 Author: Stefan Roese <sr@denx.de>
13793 Date: Sat Mar 31 13:15:06 2007 +0200
13795 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
13797 Additional RAM information is now printed upon powerup, like
13798 DDR2 frequency and CAS latency.
13800 Signed-off-by: Stefan Roese <sr@denx.de>
13802 commit 60723803431ac75cad085690789e433d5ab9174e
13803 Author: Stefan Roese <sr@denx.de>
13804 Date: Sat Mar 31 08:48:36 2007 +0200
13806 ppc4xx: Change Yucca config file to support ECC
13808 With the updated 44x DDR2 driver the Yucca board now supports
13809 ECC generation and checking.
13811 Signed-off-by: Stefan Roese <sr@denx.de>
13813 commit 490e5730c674b20d708b783a2c5ffd7208f83873
13814 Author: Stefan Roese <sr@denx.de>
13815 Date: Sat Mar 31 08:47:34 2007 +0200
13817 ppc4xx: Fix "bootstrap" command for Katmai board
13819 The board specific "bootstrap" command is now fixed and can
13820 be used for the AMCC Katmai board to configure different
13821 CPU/PLB/OPB frequencies.
13823 Signed-off-by: Stefan Roese <sr@denx.de>
13825 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
13826 Author: Stefan Roese <sr@denx.de>
13827 Date: Sat Mar 31 08:46:08 2007 +0200
13829 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
13831 Fix a bug in the auto calibration routine. This driver now runs
13832 more reliable with the tested modules. It's also tested with
13833 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
13835 Signed-off-by: Stefan Roese <sr@denx.de>
13837 commit 342cd097be1e7affe82f42ab3da220959a699e64
13838 Author: Michal Simek <monstr@monstr.eu>
13839 Date: Fri Mar 30 22:52:09 2007 +0200
13841 [PATCH] Clean include dependence
13843 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
13844 Author: Michal Simek <monstr@monstr.eu>
13845 Date: Fri Mar 30 22:42:45 2007 +0200
13847 [CLEAN] Remove inefficient Suzaku code
13849 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
13850 Author: Stefan Roese <sr@denx.de>
13851 Date: Wed Mar 28 15:03:16 2007 +0200
13853 Merge some AMCC make targets to keep the top-level Makefile smaller
13855 Signed-off-by: Stefan Roese <sr@denx.de>
13857 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
13858 Author: Stefan Roese <sr@denx.de>
13859 Date: Wed Mar 28 14:52:12 2007 +0200
13861 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
13863 The "old" i2c commands (iprobe, imd...) are now compiled in again,
13864 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
13867 Signed-off-by: Stefan Roese <sr@denx.de>
13869 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
13870 Author: Michal Simek <monstr@monstr.eu>
13871 Date: Tue Mar 27 00:32:16 2007 +0200
13873 PATCH: Resolve GPL license problem
13875 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
13876 Author: Rodolfo Giometti <giometti@enneenne.com>
13877 Date: Mon Mar 26 12:03:36 2007 +0200
13879 PXA: pxa27x USB OHCI support
13881 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
13883 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
13884 Author: Markus Klotzbuecher <mk@denx.de>
13885 Date: Mon Mar 26 11:21:05 2007 +0200
13887 USB: remove the S3C24X0_merge #define, which was introduced while
13888 merging OHCI drivers.
13890 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13892 commit 1798049522f594013aea29457d46794298c6ae15
13893 Author: Michal Simek <root@monstr.eu>
13894 Date: Mon Mar 26 01:39:07 2007 +0200
13896 Support for XUPV2P board
13898 BSP autoconfig support
13900 commit 0d974d5297349504a2ddfa09314be573b5df320a
13901 Author: Stefan Roese <sr@denx.de>
13902 Date: Sat Mar 24 15:57:09 2007 +0100
13904 [PATCH] Add 4xx GPIO functions
13906 This patch adds some 4xx GPIO functions. It also moves some of the
13907 common code and defines into a common 4xx GPIO header file.
13909 Signed-off-by: Stefan Roese <sr@denx.de>
13911 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
13912 Author: Stefan Roese <sr@denx.de>
13913 Date: Sat Mar 24 15:55:58 2007 +0100
13915 [PATCH] Small Sequoia cleanup
13917 Signed-off-by: Stefan Roese <sr@denx.de>
13919 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
13920 Author: Stefan Roese <sr@denx.de>
13921 Date: Sat Mar 24 15:45:34 2007 +0100
13923 [PATCH] Clean up 40EZ/Acadia support
13925 This patch cleans up all the open issue of the preliminary
13928 Signed-off-by: Stefan Roese <sr@denx.de>
13930 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
13931 Author: Jon Loeliger <jdl@freescale.com>
13932 Date: Tue Dec 12 11:02:20 2006 -0600
13934 Fix 8641HPCN problem with ld version 2.16
13936 (Dot outside sections problem).
13938 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
13940 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13942 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
13943 Author: Haiying Wang <haiying.wang@freescale.com>
13944 Date: Thu Dec 7 10:35:55 2006 -0600
13946 Set Rev 2.x 86xx PIC in mixed mode.
13948 Prevent false interrupt from hanging Linux as MSR[EE] is set
13949 to enable interrupts by changing the PIC out of the default
13950 pass through mode into mixed mode.
13952 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
13953 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13955 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
13956 Author: Jason Jin <jason.jin@freescale.com>
13957 Date: Thu Dec 7 10:32:35 2006 -0600
13959 Add flash cmd function to 8641HPCN ramboot
13961 Also fixes some commmand for 8641 HPCN ramboot case.
13963 Signed-off-by: Jason Jin <jason.jin@freescale.com>
13964 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13966 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
13967 Author: Ed Swarthout <ed.swarthout@freescale.com>
13968 Date: Thu Dec 7 10:34:14 2006 -0600
13970 Add support for 8641 Rev 2 silicon.
13972 Without this patch, I am unable to get to the prompt on rev 2 silicon.
13973 Only set ddrioovcr for rev1.
13975 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
13976 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13978 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
13979 Author: Wolfgang Denk <wd@denx.de>
13980 Date: Thu Mar 22 00:13:12 2007 +0100
13982 Code cleanup / re-insert previous Copyright entries.
13984 Signed-off-by: Wolfgang Denk <wd@denx.de>
13986 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
13987 Author: Wolfgang Denk <wd@denx.de>
13988 Date: Wed Mar 21 23:26:15 2007 +0100
13990 Code cleanup. Update CHANGELOG
13992 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
13993 Author: Stefan Roese <sr@denx.de>
13994 Date: Wed Mar 21 14:54:29 2007 +0100
13996 ppc4xx: Fix file mode of include/configs/acadia.h
13998 Signed-off-by: Stefan Roese <sr@denx.de>
14000 commit d5f4614c9350d9333e575100fb250aab774d0258
14001 Author: Markus Klotzbuecher <mk@denx.de>
14002 Date: Wed Mar 21 14:41:46 2007 +0100
14004 SPC1920: fix small clock routing bug
14006 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
14008 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
14009 Author: Stefan Roese <sr@denx.de>
14010 Date: Wed Mar 21 13:39:57 2007 +0100
14012 [PATCH] Add AMCC Acadia (405EZ) eval board support
14014 This patch adds support for the new AMCC Acadia eval board.
14016 Please note that this Acadia/405EZ support is still in a beta stage.
14017 Still lot's of cleanup needed but we need a preliminary release now.
14019 Signed-off-by: Stefan Roese <sr@denx.de>
14021 commit e01bd218b00af73499331a1a701625a852cd286f
14022 Author: Stefan Roese <sr@denx.de>
14023 Date: Wed Mar 21 13:38:59 2007 +0100
14025 [PATCH] Add AMCC PPC405EZ support
14027 This patch adds support for the new AMCC 405EZ PPC. It is in
14028 preparation for the AMCC Acadia board support.
14030 Please note that this Acadia/405EZ support is still in a beta stage.
14031 Still lot's of cleanup needed but we need a preliminary release now.
14033 Signed-off-by: Stefan Roese <sr@denx.de>
14035 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
14036 Author: Heiko Schocher <hs@pollux.denx.de>
14037 Date: Wed Mar 21 08:45:17 2007 +0100
14039 [PATCH] TQM8272: dont change the bits given from the HRCW
14040 for the SIUMCR and BCR Register.
14041 Fix the calculation for the EEprom Size
14043 Signed-off-by: Heiko Schocher <hs@denx.de>
14045 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
14046 Author: Aubrey Li <aubrey.adi@gmail.com>
14047 Date: Tue Mar 20 18:16:24 2007 +0800
14049 [Blackfin][PATCH] Add BF561 EZKIT board support
14051 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
14052 Author: Aubrey Li <aubrey.adi@gmail.com>
14053 Date: Mon Mar 19 22:55:58 2007 +0800
14055 [Blackfin][PATCH] minor cleanup
14057 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
14058 Author: Wolfgang Denk <wd@denx.de>
14059 Date: Mon Mar 19 13:10:08 2007 +0100
14061 Remove obsoleted POST files.
14063 Signed-off-by: Wolfgang Denk <wd@denx.de>
14065 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
14066 Author: Aubrey Li <aubrey.adi@gmail.com>
14067 Date: Mon Mar 19 01:26:11 2007 +0800
14069 [PATCH] Add flash chip M29W320ET/B support
14071 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
14072 Author: Aubrey Li <aubrey.adi@gmail.com>
14073 Date: Mon Mar 19 01:24:52 2007 +0800
14075 [Blackfin][PATCH] Add BF537 stamp board support
14077 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
14078 Author: Stefan Roese <sr@denx.de>
14079 Date: Fri Mar 16 21:11:42 2007 +0100
14081 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
14083 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
14084 DDR memory are dynamically programmed matching the total size
14085 of the equipped memory (DIMM modules).
14087 Signed-off-by: Stefan Roese <sr@denx.de>
14089 commit 76d1466f918b881cda2d259254761e73885093c2
14090 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14091 Date: Tue Mar 13 13:38:05 2007 +0100
14093 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
14094 boards in terms of unification.
14096 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14098 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
14099 Author: Wolfgang Denk <wd@denx.de>
14100 Date: Tue Mar 13 16:05:55 2007 +0100
14102 Make SC3 board build with 'make O='; use 'addcons' consistently
14103 (SC3 and Jupiter used to use 'addcon' instead).
14105 Signed-off-by: Wolfgang Denk wd@denx.de
14107 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
14108 Author: Heiko Schocher <hs@pollux.denx.de>
14109 Date: Tue Mar 13 09:40:59 2007 +0100
14111 [PATCH] update board config for jupiter Board:
14113 CONFIG_CMDLINE_EDITING,
14114 CFG_ENV_ADDR_REDUND activated
14116 Signed-off-by: Heiko Schocher <hs@denx.de>
14118 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
14119 Author: Aubrey Li <aubrey.adi@gmail.com>
14120 Date: Mon Mar 12 12:11:55 2007 +0800
14122 [Blackfin][PATCH] minor cleanup
14124 commit bfa5754a58477ac917d21527cd0f079d87cf188e
14125 Author: Aubrey Li <aubrey.adi@gmail.com>
14126 Date: Mon Mar 12 01:42:06 2007 +0800
14128 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
14130 commit 8440bb14581a294375c34b91b42512f9753d1130
14131 Author: Aubrey Li <aubrey.adi@gmail.com>
14132 Date: Mon Mar 12 00:25:14 2007 +0800
14134 [Blackfin][PATCH] code cleanup
14136 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
14137 Author: Michal Simek <monstr@monstr.eu>
14138 Date: Sun Mar 11 13:48:24 2007 +0100
14140 [Microblaze][PATCH] part 2
14142 interrupt controller support
14146 board information support
14148 booting image support
14150 adding support for Xilinx ML401
14152 commit 76316a318de91f6184e7c22a10e02d275ade2441
14153 Author: Michal Simek <monstr@monstr.eu>
14154 Date: Sun Mar 11 13:42:58 2007 +0100
14156 [Microblaze][PATCH]
14158 interrupt controller support
14162 board information support
14164 booting image support
14166 adding support for Xilinx ML401
14168 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
14169 Author: Aubrey Li <aubrey.adi@gmail.com>
14170 Date: Sat Mar 10 23:49:29 2007 +0800
14172 [Blackfin][PATCH] code cleanup
14174 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
14175 Author: Aubrey.Li <aubrey.adi@gmail.com>
14176 Date: Fri Mar 9 13:40:56 2007 +0800
14178 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
14180 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
14181 Author: Aubrey.Li <aubrey.adi@gmail.com>
14182 Date: Fri Mar 9 13:38:44 2007 +0800
14184 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
14186 commit 992423ab43c2bcf6b704853bd00af77450915e20
14187 Author: Stefan Roese <sr@denx.de>
14188 Date: Thu Mar 8 23:00:08 2007 +0100
14190 ppc4xx: Fix file mode of sequoia.c
14192 Signed-off-by: Stefan Roese <sr@denx.de>
14194 commit eb92f613556800f7483666db09d9a237ad911d4a
14195 Author: Wolfgang Denk <wd@pollux.denx.de>
14196 Date: Thu Mar 8 22:52:51 2007 +0100
14200 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
14201 Author: John Otken john@softadvances.com <john@softadvances.com>
14202 Date: Thu Mar 8 09:39:48 2007 -0600
14204 ppc4xx: Clear Sequoia/Rainier security engine reset bits
14206 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
14208 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
14209 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14210 Date: Thu Mar 8 16:26:52 2007 +0100
14212 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
14214 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14216 commit d9fc703246840c4b268debf48c334ba55c597dc0
14217 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14218 Date: Thu Mar 8 16:25:47 2007 +0100
14220 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
14222 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14224 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
14225 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14226 Date: Thu Mar 8 16:23:11 2007 +0100
14228 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
14230 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14232 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
14233 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14234 Date: Thu Mar 8 16:20:32 2007 +0100
14236 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
14238 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14240 commit f9fc6a5852a6335840882fa2111925010eea1abe
14241 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14242 Date: Wed Mar 7 15:32:01 2007 +0100
14244 fixed ethernet phy configuration for plu405 board
14246 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14248 commit 769104c9356594deb2092e204a39c05b33202d6c
14249 Author: Wolfgang Denk <wd@pollux.denx.de>
14250 Date: Thu Mar 8 21:49:27 2007 +0100
14254 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
14255 Author: Stefan Roese <sr@denx.de>
14256 Date: Thu Mar 8 10:13:16 2007 +0100
14258 [PATCH] Update AMCC Luan 440SP eval board support
14260 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
14261 inititializition. This includes DDR auto calibration and support
14262 for different DIMM modules, instead of the fixed setup used in
14263 the earlier version.
14265 This patch also enables the cache in FLASH for the startup
14266 phase of U-Boot (while running from FLASH). After relocating to
14267 SDRAM the cache is disabled again. This will speed up the boot
14268 process, especially the SDRAM setup, since there are some loops
14269 for memory testing (auto calibration).
14271 Signed-off-by: Stefan Roese <sr@denx.de>
14273 commit 2f5df47351910a2936c7741cf111855829200943
14274 Author: Stefan Roese <sr@denx.de>
14275 Date: Thu Mar 8 10:10:18 2007 +0100
14277 [PATCH] Update AMCC Yucca 440SPe eval board support
14279 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
14280 inititializition. This includes DDR auto calibration and support
14281 for different DIMM modules, instead of the fixed setup used in
14282 the earlier version.
14284 Signed-off-by: Stefan Roese <sr@denx.de>
14286 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
14287 Author: Stefan Roese <sr@denx.de>
14288 Date: Thu Mar 8 10:07:18 2007 +0100
14290 ppc4xx: Small AMCC Katmai 440SPe update
14292 Signed-off-by: Stefan Roese <sr@denx.de>
14294 commit df294497479b1dca6dd86318b2a912f72fede0df
14295 Author: Stefan Roese <sr@denx.de>
14296 Date: Thu Mar 8 10:06:09 2007 +0100
14298 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
14300 Signed-off-by: Stefan Roese <sr@denx.de>
14302 commit 83853178bd36bca6f0f8f1331476620c84a587fc
14303 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
14304 Date: Wed Mar 7 12:14:50 2007 -0600
14306 net - Support ping reply when processing net-loop
14308 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
14310 This permits the ping command to test the phy interface when the phy
14311 is put in loopback mode (typically by setting register 0 bit 14).
14313 It also allows the port to respond to an external ping when u-boot is
14314 processing some other net command (such as tftp). This is useful when
14315 tftp appears to hang.
14317 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14318 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14320 commit fa1aef15bcd47736687be1af544506e90fba545d
14321 Author: Stefan Roese <sr@denx.de>
14322 Date: Wed Mar 7 16:43:00 2007 +0100
14324 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
14326 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
14327 DDR memory are dynamically programmed matching the total size
14328 of the equipped memory (DIMM modules).
14330 Signed-off-by: Stefan Roese <sr@denx.de>
14332 commit e2ebe696818939e2b974628be9c921ea3fe9de13
14333 Author: Stefan Roese <sr@denx.de>
14334 Date: Wed Mar 7 16:39:36 2007 +0100
14336 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
14338 This patch fixes a problem that occurs when 2 DIMM's are
14339 used. This problem was first spotted and fixed by Gerald Jackson
14340 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
14341 problem in a little more clever way.
14343 This patch also adds the nice functionality to dynamically
14344 create the TLB entries for the SDRAM (tlb.c). So we should
14345 never run into such problems with wrong (too short) TLB
14346 initialization again on these platforms.
14348 As this feature is new to the "old" 44x SPD DDR driver, it
14349 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
14351 Signed-off-by: Stefan Roese <sr@denx.de>
14353 commit 39218433983417b9df087976a79e3f80dd5e83d6
14354 Author: Wolfgang Denk <wd@denx.de>
14355 Date: Wed Mar 7 16:33:44 2007 +0100
14357 UC101: fix compiler warnings
14359 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
14360 Author: Wolfgang Denk <wd@pollux.denx.de>
14361 Date: Wed Mar 7 16:19:46 2007 +0100
14363 HMI1001: fix build error, cleanup compiler warnings.
14365 commit ad5bb451ade552c44bef9119d907929ebc2c126f
14366 Author: Wolfgang Denk <wd@pollux.denx.de>
14367 Date: Tue Mar 6 18:08:43 2007 +0100
14369 Restructure POST directory to support of other CPUs, boards, etc.
14371 commit a5284efd125967675b2e9c6ef7b95832268ad360
14372 Author: Wolfgang Denk <wd@pollux.denx.de>
14373 Date: Tue Mar 6 18:01:47 2007 +0100
14375 Fix HOSTARCH handling.
14376 Patch by Mike Frysinger, Mar 05 2007
14378 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
14379 Author: Stefan Roese <sr@denx.de>
14380 Date: Tue Mar 6 07:47:04 2007 +0100
14382 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
14384 As provided by the AMCC applications team, this patch optimizes the
14385 DDR2 setup for 166MHz bus speed. The values provided are also save
14386 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
14387 setup has to be adjusted as done in this patch.
14389 For this the NAND booting version had to include the "speed.c" file
14390 from the cpu/ppc4xx directory. With this addition the NAND SPL image
14391 will just fit into the 4kbytes of program space. gcc version 4.x as
14392 provided with ELDK 4.x is needed to generate this optimized code.
14394 Signed-off-by: Stefan Roese <sr@denx.de>
14396 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
14397 Author: Wolfgang Denk <wd@pollux.denx.de>
14398 Date: Sun Mar 4 01:36:05 2007 +0100
14402 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
14403 Author: Kim Phillips <kim.phillips@freescale.com>
14404 Date: Wed Feb 28 00:02:04 2007 -0600
14406 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
14408 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
14410 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
14411 Author: Kumar Gala <galak@kernel.crashing.org>
14412 Date: Tue Feb 27 23:51:42 2007 -0600
14414 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
14416 The config value for:
14424 Were not being used when setting the appropriate register
14427 * CFG_SCCR_USBMPHCM
14432 To allow full config of the SCCR.
14434 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
14435 that were just bogus.
14437 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14439 commit d51b3cf371cd441030460ef19d36b2924c361b1a
14440 Author: Kim Phillips <kim.phillips@freescale.com>
14441 Date: Thu Feb 22 20:06:57 2007 -0600
14443 mpc83xx: update [local-]mac-address properties on UEC based devices
14445 8360 and 832x weren't updating their [local-]mac-address
14446 properties. This patch fixes that.
14448 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14450 commit 61f4f912acbe60776c5e00df1ec94094ce672957
14451 Author: Timur Tabi <timur@freescale.com>
14452 Date: Tue Feb 13 10:41:42 2007 -0600
14454 mpc83xx: write MAC address to mac-address and local-mac-address
14456 Some device trees have a mac-address property, some have local-mac-address,
14457 and some have both. To support all of these device trees, this patch
14458 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
14459 This function already updates local-mac-address.
14461 Signed-off-by: Timur Tabi <timur@freescale.com>
14463 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
14464 Author: Kim Phillips <kim.phillips@freescale.com>
14465 Date: Tue Feb 27 18:41:08 2007 -0600
14467 mpc83xx: add command line editing by default
14469 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
14470 Author: Kim Phillips <kim.phillips@freescale.com>
14471 Date: Wed Feb 14 19:50:53 2007 -0600
14473 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
14475 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
14476 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
14478 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
14480 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14481 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
14483 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
14484 Author: Xie Xiaobo <r63061@freescale.com>
14485 Date: Wed Feb 14 18:27:17 2007 +0800
14487 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
14489 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
14490 it pass DDR/DDR2 compliance tests.
14492 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
14494 commit b110f40bd180c6b560276589beedf753e97c46ce
14495 Author: Xie Xiaobo <r63061@freescale.com>
14496 Date: Wed Feb 14 18:27:06 2007 +0800
14498 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
14500 MPC8360E rev2.0 have new spridr,and PVR value,
14501 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
14503 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
14505 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
14506 Author: Xie Xiaobo <r63061@freescale.com>
14507 Date: Wed Feb 14 18:26:44 2007 +0800
14509 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
14511 MPC8349E rev3.1 have new spridr,and PVR value,
14512 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
14514 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
14516 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
14517 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
14518 Date: Wed Jan 31 11:04:19 2007 +0100
14520 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
14522 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
14523 which is used to se if an slave will ACK after receiving its address.
14525 Correct i2c probing to use this method as the old method could upset
14526 a slave as it wrote a data byte to it.
14528 Add a small delay in i2c_init() to let the controller
14529 shutdown any ongoing I2C activity.
14531 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
14533 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
14534 Author: Timur Tabi <timur@freescale.com>
14535 Date: Wed Jan 31 15:54:29 2007 -0600
14537 mpc83xx: Add support for the MPC8349E-mITX-GP
14539 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
14540 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
14541 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
14543 Signed-off-by: Timur Tabi <timur@freescale.com>
14545 commit fab16807adad350f618024350c6950165c247c72
14546 Author: Timur Tabi <timur@freescale.com>
14547 Date: Wed Jan 31 15:54:20 2007 -0600
14549 mpc83xx: Delete sdram_init() for MPC8349E-mITX
14551 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
14552 never does anything. This patch deletes it.
14554 Signed-off-by: Timur Tabi <timur@freescale.com>
14556 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
14557 Author: Dave Liu <daveliu@freescale.com>
14558 Date: Fri Jan 19 10:43:26 2007 +0800
14560 mpc83xx: Fix the LAW1/3 bug
14562 The patch solves the alignment problem of the local bus access windows to
14563 render accessible the memory bank and PHY registers of UPC 1 (starting at
14564 0xf801 0000). What we actually did was to adjust the sizes of the bus
14565 access windows so that the base address alignment requirement would be met.
14567 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
14568 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
14569 Signed-off-by: Dave Liu <daveliu@freescale.com>
14571 commit 97c4b397dce236a7318b304667bf89e59d08b17c
14572 Author: Kim Phillips <kim.phillips@freescale.com>
14573 Date: Tue Jan 30 16:15:31 2007 -0600
14575 mpc83xx: don't hang if watchdog configured on 8360, 832x
14577 don't hang if watchdog configured on 8360, 832x
14579 The watchdog programming model is the same across all 83xx devices;
14580 make the code reflect that.
14582 commit b70047478570e371ce7223be342ce98afea0f7d6
14583 Author: Kim Phillips <kim.phillips@freescale.com>
14584 Date: Tue Jan 30 16:15:21 2007 -0600
14586 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
14588 protect memcpy to bad address if a local-mac-address is missing from dt
14590 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
14591 Author: Kim Phillips <kim.phillips@freescale.com>
14592 Date: Tue Jan 30 16:15:04 2007 -0600
14594 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
14596 make 8360 default environment fdt be 8360 (not 8349)
14598 commit a28899c910024a0226331df07207b1038c300c93
14599 Author: Emilian Medve <Emilian.Medve@freescale.com>
14600 Date: Tue Jan 30 16:14:50 2007 -0600
14602 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
14604 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
14605 be used for busy-waiting since it strips the 'volatile' property from
14606 the bd variable. gcc3 was working by pure luck.
14608 This is a follow on patch to "Fix the UEC driver bug of QE"
14610 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
14611 Author: Kumar Gala <galak@kernel.crashing.org>
14612 Date: Tue Jan 30 14:08:30 2007 -0600
14614 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
14616 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
14617 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
14618 CONFIG_MPC834X so they are more generic.
14620 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14622 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
14623 Author: Kim Phillips <kim.phillips@freescale.com>
14624 Date: Thu Jan 25 13:40:55 2007 -0600
14626 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
14628 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
14629 Author: Kim Phillips <kim.phillips@freescale.com>
14630 Date: Wed Jan 24 17:18:37 2007 -0600
14632 mpc83xx: sort Makefile targets
14634 reordered targets alphabetically
14636 commit 91e25769771c1164ed63ffca0add49f934ae3343
14637 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
14638 Date: Tue Jan 16 11:38:14 2007 -0500
14640 mpc83xx: U-Boot support for Wind River SBC8349
14642 I've redone the SBC8349 support to match git-current, which
14643 incorporates all the MPC834x updates from Freescale since the 1.1.6
14644 release, including the DDR changes.
14646 I've kept all the SBC8349 files as parallel as possible to the
14647 MPC8349EMDS ones for ease of maintenance and to allow for easy
14648 inspection of what was changed to support this board. Hence the SBC8349
14649 U-Boot has FDT support and everything else that the MPC8349EMDS has.
14651 Fortunately the Freescale updates added support for boards using CS0,
14652 but I had to change spd_sdram.c to allow for board specific settings for
14653 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
14654 default if the board doesn't specify a value.)
14656 Hopefully this should be mergeable as-is and require no whitespace
14657 cleanups or similar, but if something doesn't measure up then let me
14658 know and I'll fix it.
14663 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
14664 Author: Sam Song <samsongshu@yahoo.com.cn>
14665 Date: Thu Dec 14 19:03:21 2006 +0800
14667 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
14669 A redundant semicolon existed in mpc8349itx.c
14672 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
14674 commit f35f358241c549be3f75cfe2eaa642914275b7ba
14675 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
14676 Date: Wed Dec 6 21:23:55 2006 -0500
14678 mpc83xx: Put the version (and magic) after the HRCW.
14680 Put the version (and magic) after the HRCW. This puts it in a fixed
14681 location in flash, not at the start of flash but as close as we can get.
14683 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
14685 commit 48aecd969171a6e99a55fae04933857787f9a5bd
14686 Author: Dave Liu <r63238@freescale.com>
14687 Date: Thu Dec 7 21:14:51 2006 +0800
14689 mpc83xx: Add the MPC832XEMDS board readme
14691 Add the MPC832XEMDS board readme
14693 Signed-off-by: Dave Liu <daveliu@freescale.com>
14695 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
14696 Author: Dave Liu <r63238@freescale.com>
14697 Date: Thu Dec 7 21:13:15 2006 +0800
14699 mpc83xx: Add support for the MPC832XEMDS board
14701 This patch supports DUART, ETH3/4 and PCI etc.
14703 Signed-off-by: Dave Liu <daveliu@freescale.com>
14705 commit e080313c32322e15ab5a18eb896a252858c57284
14706 Author: Dave Liu <r63238@freescale.com>
14707 Date: Thu Dec 7 21:11:58 2006 +0800
14709 mpc83xx: streamline the 83xx immr head file
14711 For better format and style, I streamlined the 83xx head files,
14712 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
14713 duplicated macro definition appear in the both files; 2) the structure
14714 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
14715 macro definition put inside the each structure. So, I cleaned up the
14716 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
14717 moved the macro definition to mpc83xx.h, Just like MPC8260.
14721 *streamline the 83xx immr head file
14723 Signed-off-by: Dave Liu <daveliu@freescale.com>
14725 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
14726 Author: Dave Liu <r63238@freescale.com>
14727 Date: Wed Dec 6 11:38:17 2006 +0800
14729 mpc83xx: Fix the UEC driver bug of QE
14731 The patch prevents the GCC tool chain from striping useful code for
14732 optimization. It will make UEC ethernet driver workable, Otherwise the
14733 UEC will fail in tx when you are using gcc4.x. but the driver can work
14734 when using gcc3.4.3.
14738 *Prevent the GCC from striping code for optimization, Otherwise the UEC
14739 will tx failed when you are using gcc4.x.
14741 Signed-off-by: Dave Liu <daveliu@freescale.com>
14743 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
14744 Author: Stefan Roese <sr@denx.de>
14745 Date: Thu Mar 1 21:11:36 2007 +0100
14747 [PATCH] Update AMCC Katmai 440SPe eval board support
14749 This patch updates the recently added Katmai board support. The biggest
14750 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
14753 Please note, that still some problems are left with some memory
14754 configurations. See the driver for more details.
14756 Signed-off-by: Stefan Roese <sr@denx.de>
14758 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
14759 Author: Stefan Roese <sr@denx.de>
14760 Date: Thu Mar 1 07:03:25 2007 +0100
14762 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
14764 Signed-off-by: Stefan Roese <sr@denx.de>
14766 commit ccbc7036648e465697ca298ba51e0e76dda352a0
14767 Author: Wolfgang Denk <wd@pollux.denx.de>
14768 Date: Wed Feb 28 01:28:53 2007 +0100
14770 SC3: fix typo in default environment
14772 commit e344568b1b46af85ec32d815586f91bc115d6223
14773 Author: Sergei Poselenov <sposelenov@emcraft.com>
14774 Date: Tue Feb 27 20:15:30 2007 +0300
14776 MCC200: Fixes for update procedure
14778 - fix logic error in image type handling
14779 - make sure file system images (cramfs etc.) get stored in flash
14780 with image header stripped so they can be mounted through MTD
14782 commit 743571145b37182757d4e688a77860b36ee77573
14783 Author: Wolfgang Denk <wd@pollux.denx.de>
14784 Date: Tue Feb 27 14:26:04 2007 +0100
14786 Minor code cleanup.
14788 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
14789 Author: Sergei Poselenov <sposelenov@emcraft.com>
14790 Date: Tue Feb 27 12:40:16 2007 +0300
14792 MCC200 update - add LCD Progress Indicator
14794 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
14795 Author: Stefan Roese <sr@denx.de>
14796 Date: Thu Feb 22 07:43:34 2007 +0100
14798 [PATCH] get_dev() now unconditionally uses manual relocation
14800 Since the relocation fix is not included yet and we're not sure how
14801 it will be added, this patch removes code that required relocation
14802 to be fixed for now.
14804 Signed-off-by: Stefan Roese <sr@denx.de>
14806 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
14807 Author: Stefan Roese <sr@denx.de>
14808 Date: Thu Feb 22 07:40:23 2007 +0100
14810 [PATCH] Change systemace driver to select 8 & 16bit mode
14812 As suggested by Grant Likely this patch enables the Xilinx SystemACE
14813 driver to select 8 or 16bit mode upon startup.
14815 Signed-off-by: Stefan Roese <sr@denx.de>
14817 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
14818 Author: Haiying Wang <Haiying.Wang@freescale.com>
14819 Date: Wed Feb 21 16:52:31 2007 +0100
14821 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
14823 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
14824 is fully finished. The sync() is defined in each CPU's io.h file. For
14825 those CPUs which do not need sync for now, a dummy sync() is defined in
14826 their io.h as well.
14828 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
14830 commit da04995c7dc6772013a9a0dc5c767f190c402478
14831 Author: Stefan Roese <sr@denx.de>
14832 Date: Wed Feb 21 13:44:34 2007 +0100
14834 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
14836 Signed-off-by: Stefan Roese <sr@denx.de>
14838 commit 751bb57107d78978ae08e697c3deba816f5be091
14839 Author: Stefan Roese <sr@denx.de>
14840 Date: Tue Feb 20 13:21:57 2007 +0100
14842 [PATCH] Fix relocation problem with "new" get_dev() function
14844 This patch enables the "new" get_dev() function for block devices
14845 introduced by Grant Likely to be used on systems that still suffer
14846 from the relocation problems (manual relocation neede because of
14847 problems with linker script).
14849 Hopefully we can resolve this relocation issue soon for all platform
14850 so we don't need this additional code anymore.
14852 Signed-off-by: Stefan Roese <sr@denx.de>
14854 commit d93e2212f962668b3dce091ff5edc33f2347fe37
14855 Author: Stefan Roese <sr@denx.de>
14856 Date: Tue Feb 20 13:17:42 2007 +0100
14858 [PATCH] Update SystemACE driver for 16bit access
14860 This patch removes some problems when the Xilinx SystemACE driver
14861 is used with 16bit access on an big endian platform (like the
14864 Signed-off-by: Stefan Roese <sr@denx.de>
14866 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
14867 Author: Stefan Roese <sr@denx.de>
14868 Date: Tue Feb 20 13:15:40 2007 +0100
14870 [PATCH] Clean up Katmai (440SPe) linker script
14872 Signed-off-by: Stefan Roese <sr@denx.de>
14874 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
14875 Author: Stefan Roese <sr@denx.de>
14876 Date: Tue Feb 20 10:57:08 2007 +0100
14878 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
14880 Signed-off-by: Stefan Roese <sr@denx.de>
14882 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
14883 Author: Stefan Roese <sr@denx.de>
14884 Date: Tue Feb 20 10:51:26 2007 +0100
14886 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
14888 This patch switches to the desired I2C bus when the date/dtt
14889 commands are called. This can be configured using the
14890 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
14892 Signed-off-by: Stefan Roese <sr@denx.de>
14894 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
14895 Author: Stefan Roese <sr@denx.de>
14896 Date: Tue Feb 20 10:43:34 2007 +0100
14898 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
14900 This patch adds support for the DDR2 controller used on the
14901 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
14902 board and works fine with the following DIMM modules:
14904 - Corsair CM2X512-5400C4 (512MByte per DIMM)
14905 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
14906 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
14908 This patch also adds the nice functionality to dynamically
14909 create the TLB entries for the SDRAM (tlb.c). So we should
14910 never run into such problems with wrong (too short) TLB
14911 initialization again on these platforms.
14913 Signed-off-by: Stefan Roese <sr@denx.de>
14915 commit 36d830c9830379045f5daa9f542ac1c990c70068
14916 Author: Stefan Roese <sr@denx.de>
14917 Date: Tue Feb 20 10:35:42 2007 +0100
14919 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
14921 Since the existing 4xx SPD SDRAM initialization routines for the
14922 405 SDRAM controller and the 440 DDR controller don't have much in
14923 common this patch splits both drivers into different files.
14925 This is in preparation for the 440 DDR2 controller support (440SP/e).
14927 Signed-off-by: Stefan Roese <sr@denx.de>
14929 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
14930 Author: Stefan Roese <sr@denx.de>
14931 Date: Tue Feb 20 10:27:08 2007 +0100
14933 [PATCH] PPC4xx: Add support for multiple I2C busses
14935 This patch adds support for multiple I2C busses on the PPC4xx
14936 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
14937 to make use of this feature.
14939 It also merges the 405 and 440 i2c header files into one common
14942 Also the 4xx i2c reset procedure is reworked since I experienced
14943 some problems with the first access on the 440SPe Katmai board.
14945 Signed-off-by: Stefan Roese <sr@denx.de>
14947 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
14948 Author: Grant Likely <grant.likely@secretlab.ca>
14949 Date: Tue Feb 20 09:05:45 2007 +0100
14951 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
14953 Block device read/write is anonymous data; there is no need to use a
14954 typed pointer. void * is fine. Also add a hook for block_read functions
14956 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14958 commit 53758fa20e935cc87eeb0519ed365df753a6f289
14959 Author: Grant Likely <grant.likely@secretlab.ca>
14960 Date: Tue Feb 20 09:05:38 2007 +0100
14962 [PATCH 8_9] Add block_write hook to block_dev_desc_t
14964 Preparation for future patches which support block device writing
14966 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14968 commit f4852ebe6ca946a509667eb68be42026f837be76
14969 Author: Grant Likely <grant.likely@secretlab.ca>
14970 Date: Tue Feb 20 09:05:31 2007 +0100
14972 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
14974 Register read/write does not need to be wrapped in a full function. The
14975 patch replaces them with macros.
14977 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14979 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
14980 Author: Grant Likely <grant.likely@secretlab.ca>
14981 Date: Tue Feb 20 09:05:23 2007 +0100
14983 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
14985 The code in this file is not a command; it is a device driver. Put it in
14986 the correct place. There are zero functional changes in this patch, it
14987 only moves the file.
14989 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14991 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
14992 Author: Grant Likely <grant.likely@secretlab.ca>
14993 Date: Tue Feb 20 09:05:16 2007 +0100
14995 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
14997 This patch is in preparation of additional changes to the sysace driver.
14998 May as well take this opportunity to fixup the inconsistent whitespace since
14999 this file is about to undergo major changes anyway.
15001 There are zero functional changes in this patch. It only cleans up the
15004 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15006 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
15007 Author: Grant Likely <grant.likely@secretlab.ca>
15008 Date: Tue Feb 20 09:05:07 2007 +0100
15010 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
15012 isprint is already defined in ctype.c
15014 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15016 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
15017 Author: Grant Likely <grant.likely@secretlab.ca>
15018 Date: Tue Feb 20 09:05:00 2007 +0100
15020 [PATCH 3_9] Move buffer print code from md command to common function
15022 Printing a buffer is a darn useful thing. Move the buffer print code
15023 into print_buffer() in lib_generic/
15025 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15027 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
15028 Author: Grant Likely <grant.likely@secretlab.ca>
15029 Date: Tue Feb 20 09:04:52 2007 +0100
15031 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
15033 Change the xilinx device drivers and board code to include config.h
15034 instead of xparameters.h directly. config.h always includes the
15035 correct xparameters file. This change reduces the posibility of
15036 including the wrong file when adding a new xilinx board port
15038 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15040 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
15041 Author: Grant Likely <grant.likely@secretlab.ca>
15042 Date: Tue Feb 20 09:04:34 2007 +0100
15044 [PATCH 1_4] Merge common get_dev() routines for block devices
15046 Each of the filesystem drivers duplicate the get_dev routine. This change
15047 merges them into a single function in part.c
15049 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15051 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
15052 Author: Wolfgang Denk <wd@pollux.denx.de>
15053 Date: Mon Feb 19 23:09:51 2007 +0100
15055 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
15056 as root file system images.
15058 commit 489c696ae7211218961d159e43e722d74c36fcbc
15059 Author: Sergei Poselenov <sposelenov@emcraft.com>
15060 Date: Wed Feb 14 14:30:28 2007 +0300
15062 MCC200: Extensions to Software Update Mechanism
15064 Update / extend Software Update Mechanism for MCC200 board:
15066 - Add support for rootfs image added. The environment variables
15067 "rootfs_st" and "rootfs_nd" can be used to override the default
15068 values of the image start and end.
15069 - Remove excessive key check code.
15072 commit 4be23a12f23f1372634edc3215137b09768b7949
15073 Author: Stefan Roese <sr@denx.de>
15074 Date: Mon Feb 19 08:23:15 2007 +0100
15076 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
15078 As spotted by Matthias Fuchs, the READY input should not be
15079 enabled for the NOR FLASH on the Sequoia board.
15081 Signed-off-by: Stefan Roese <sr@denx.de>
15083 commit 2605e90bf676d48123afe5719a846d2b52b24aac
15084 Author: Heiko Schocher <hs@pollux.denx.de>
15085 Date: Fri Feb 16 07:57:42 2007 +0100
15087 [PATCH] Added support for the jupiter board.
15089 Signed-off-by: Heiko Schocher <hs@denx.de>
15091 commit 497d012e5be0194e1084073d0081eb1a844796b2
15092 Author: Gary Jennejohn <garyj@pollux.denx.de>
15093 Date: Mon Feb 12 13:11:50 2007 +0100
15095 LPC2292: patch from Siemens.
15097 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
15098 Author: Stefan Roese <sr@denx.de>
15099 Date: Sat Feb 10 08:49:31 2007 +0100
15101 [PATCH] Add missing p3mx.h file to repository (ups)
15103 Signed-off-by: Stefan Roese <sr@denx.de>
15105 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
15106 Author: Bartlomiej Sieka <tur@semihalf.com>
15107 Date: Fri Feb 9 10:45:42 2007 +0100
15109 [Motion-PRO] Preliminary support for the Motion-PRO board.
15111 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
15112 Author: Stefan Roese <sr@denx.de>
15113 Date: Wed Feb 7 16:51:08 2007 +0100
15115 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
15117 Some boards that can have more than 768MBytes of SDRAM need to
15118 set "initrd_high", so that the initrd can be accessed by the
15121 Signed-off-by: Stefan Roese <sr@denx.de>
15123 commit 7372ca68227930d03cffa548310524cad5b96733
15124 Author: Stefan Roese <sr@denx.de>
15125 Date: Fri Feb 2 12:44:22 2007 +0100
15127 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
15129 Previously the strapping DCR/SDR was read to determine if the internal PCI
15130 arbiter is enabled or not. This strapping bit can be overridden, so now
15131 the current status is read from the correct DCR/SDR register.
15133 Signed-off-by: Stefan Roese <sr@denx.de>
15135 commit 2aa54f651a42d198673318f07a20c89a43e4d197
15136 Author: Stefan Roese <sr@denx.de>
15137 Date: Fri Feb 2 12:42:08 2007 +0100
15139 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
15141 Signed-off-by: Stefan Roese <sr@denx.de>
15143 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
15144 Author: Stefan Roese <sr@denx.de>
15145 Date: Thu Feb 1 13:22:41 2007 +0100
15147 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
15149 When PCI PNP is enabled the pci pnp configuration routine is called
15150 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
15151 problems with some PCI cards. For now disable the PCI PNP configuration.
15153 Signed-off-by: Stefan Roese <sr@denx.de>
15155 commit 2902fadade3be7659467e8d074048c6b7068f5c0
15156 Author: Stefan Roese <sr@denx.de>
15157 Date: Wed Jan 31 16:56:10 2007 +0100
15159 [PATCH] Update 440EPx/440GRx cpu detection
15161 Signed-off-by: Stefan Roese <sr@denx.de>
15163 commit d5ea287b02a6945c3977410e364a879dd1a555c8
15164 Author: Stefan Roese <sr@denx.de>
15165 Date: Wed Jan 31 16:38:04 2007 +0100
15167 [PATCH] Update esd cpci5200 files
15169 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
15171 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
15172 Author: Stefan Roese <sr@denx.de>
15173 Date: Wed Jan 31 16:37:34 2007 +0100
15175 [PATCH] Add support for esd mecp5200 board
15177 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
15179 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
15180 Author: Stefan Roese <sr@denx.de>
15181 Date: Wed Jan 31 12:38:50 2007 +0100
15183 [PATCH] Remove unneccessary yellowstone board config file
15185 Signed-off-by: Stefan Roese <sr@denx.de>
15187 commit e802594b6fa1b166308820c276b96dc0d7cc731c
15188 Author: Stefan Roese <sr@denx.de>
15189 Date: Tue Jan 30 17:06:10 2007 +0100
15191 [PATCH] Update Sequoia (440EPx) config file
15193 The config file now handles the 2nd target, the Rainier (440GRx)
15194 evaluation board better. Additionally the PPC input clock was
15195 adjusted to match the correct value of 33.0 MHz.
15197 Signed-off-by: Stefan Roese <sr@denx.de>
15199 commit 700200c67e73b83751418abe7815840dca8fd6cb
15200 Author: Stefan Roese <sr@denx.de>
15201 Date: Tue Jan 30 17:04:19 2007 +0100
15203 [PATCH] Merge Yosemite & Yellowstone board ports
15205 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
15206 share one config file and all board specific files. This way we
15207 don't have to maintain two different sets of files for nearly
15210 Signed-off-by: Stefan Roese <sr@denx.de>
15212 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
15213 Author: Stefan Roese <sr@denx.de>
15214 Date: Tue Jan 30 15:01:49 2007 +0100
15216 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
15218 SCPU doesn't use redundant environment in flash.
15220 Signed-off-by: Stefan Roese <sr@denx.de>
15222 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
15223 Author: Stefan Roese <sr@denx.de>
15224 Date: Tue Jan 30 12:51:07 2007 +0100
15226 [PATCH] alpr: Update alpr board config file
15228 Signed-off-by: Stefan Roese <sr@denx.de>
15230 commit f8db84f132b1e335f20f96138a1f09ed97b08664
15231 Author: Wolfgang Denk <wd@pollux.denx.de>
15232 Date: Tue Jan 30 00:50:40 2007 +0100
15234 LPC2292 SODIMM port coding style cleanup.
15236 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
15237 Author: Gary Jennejohn <garyj@pollux.denx.de>
15238 Date: Wed Jan 24 12:16:56 2007 +0100
15240 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
15242 commit 2daf046ba627f85f44195815778140039636244e
15243 Author: Bartlomiej Sieka <tur@semihalf.com>
15244 Date: Tue Jan 23 17:22:06 2007 +0100
15246 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
15248 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
15249 Author: Bartlomiej Sieka <tur@semihalf.com>
15250 Date: Tue Jan 23 14:21:14 2007 +0100
15252 [iDMR] Flash driver on initialisation write-protects some sectors,
15253 currently sectors 0-3. Sector 3 does not need to be protected, though
15254 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
15255 fixes this, i.e., only sectors 0-2 are protected.
15257 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
15258 Author: Bartlomiej Sieka <tur@semihalf.com>
15259 Date: Tue Jan 23 14:11:22 2007 +0100
15261 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
15262 "mii device" results in "Unexpected exception"). Fixing this properly
15263 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
15264 this commit disables MII commads for now.
15266 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
15267 Author: Bartlomiej Sieka <tur@semihalf.com>
15268 Date: Tue Jan 23 13:25:22 2007 +0100
15270 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
15271 Identification Register (CIR).
15273 commit fdef388758506765d4d6a7155c8f1584c63ff581
15274 Author: roy zang <tie-fei.zang@freescale.com>
15275 Date: Mon Jan 22 13:19:21 2007 +0800
15277 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
15278 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
15279 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
15282 commit a4012396645533aef218354eeba754dff0deace8
15283 Author: Wolfgang Denk <wd@pollux.denx.de>
15284 Date: Fri Jan 19 23:08:39 2007 +0100
15286 Minor code cleanup.
15288 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
15289 Author: Heiko Schocher <hs@pollux.denx.de>
15290 Date: Fri Jan 19 19:57:10 2007 +0100
15292 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
15294 Signed-off-by: Heiko Schocher <hs@denx.de>
15296 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
15297 Author: Heiko Schocher <hs@pollux.denx.de>
15298 Date: Fri Jan 19 18:05:26 2007 +0100
15300 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
15301 if you must swap the bytes between reading/writing.
15302 (Needed for the SC3 board)
15304 Signed-off-by: Heiko Schocher <hs@denx.de>
15306 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
15307 Author: Stefan Roese <sr@denx.de>
15308 Date: Thu Jan 18 16:05:47 2007 +0100
15310 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
15312 Signed-off-by: Stefan Roese <sr@denx.de>
15314 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
15315 Author: Stefan Roese <sr@denx.de>
15316 Date: Thu Jan 18 11:54:52 2007 +0100
15318 [PATCH] Update Prodrive P3Mx support
15320 Signed-off-by: Stefan Roese <sr@denx.de>
15322 commit 34167a36c29ee946b727465db5c014746a08e978
15323 Author: Stefan Roese <sr@denx.de>
15324 Date: Thu Jan 18 11:48:10 2007 +0100
15326 [PATCH] Add missing Taishan config file
15328 Signed-off-by: Stefan Roese <sr@denx.de>
15330 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
15331 Author: Heiko Schocher <hs@pollux.denx.de>
15332 Date: Thu Jan 18 11:28:51 2007 +0100
15334 [PATCH] Fix: Compilerwarnings for SC3 board.
15335 The EBC Configuration Register is now by CFG_EBC_CFG definable
15336 Added JFFS2 support for the SC3 board.
15338 Signed-off-by: Heiko Schocher <hs@denx.de>
15340 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
15341 Author: Stefan Roese <sr@denx.de>
15342 Date: Thu Jan 18 10:25:34 2007 +0100
15344 [PATCH] Add support for AMCC Taishan PPC440GX eval board
15346 Signed-off-by: Stefan Roese <sr@denx.de>
15348 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
15349 Author: Wolfgang Denk <wd@pollux.denx.de>
15350 Date: Tue Jan 16 18:30:50 2007 +0100
15352 Raname solidcard3 into sc3; add redundant env for sc3
15354 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
15355 Author: Wolfgang Denk <wd@pollux.denx.de>
15356 Date: Tue Jan 16 12:46:35 2007 +0100
15358 Update default environment for Solidcard3
15360 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
15361 Author: Stefan Roese <sr@denx.de>
15362 Date: Mon Jan 15 09:46:29 2007 +0100
15364 [PATCH] Fix 440SPe rev B detection from previous patch
15366 Signed-off-by: Stefan Roese <sr@denx.de>
15368 commit a443d31410c571ee8f970da819a44d698fdd6b1f
15369 Author: Heiko Schocher <hs@pollux.denx.de>
15370 Date: Sun Jan 14 13:35:31 2007 +0100
15372 [FIX] correct I2C Writes for the LM81 Sensor.
15374 Signed-off-by: Heiko Schocher <hs@denx.de>
15376 commit 0bba5452835f19a61204edcda3a58112fd8e2208
15377 Author: Wolfgang Denk <wd@pollux.denx.de>
15378 Date: Sat Jan 13 11:17:10 2007 +0100
15380 Undo commit 3033ebb2: reset command does not take any arguments
15382 Haiying Wang's modification to the reset command was broken, undo it.
15384 Signed-off-by: Wolfgang Denk <wd@denx.de>
15386 commit 95981778cff0038fd9941044d6a3eda810e33258
15387 Author: Stefan Roese <sr@denx.de>
15388 Date: Sat Jan 13 08:01:03 2007 +0100
15390 [PATCH] Update 440SP(e) cpu revisions
15392 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
15394 Signed-off-by: Stefan Roese <sr@denx.de>
15396 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
15397 Author: Stefan Roese <sr@denx.de>
15398 Date: Sat Jan 13 07:59:56 2007 +0100
15400 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
15402 Now the board revision and the current PCI bus speed are printed after
15405 Also the EBC initialising is now done via defines in the board config
15408 Signed-off-by: Stefan Roese <sr@denx.de>
15410 commit 36adff362c2c0141ff8a810d42a7e478f779130f
15411 Author: Stefan Roese <sr@denx.de>
15412 Date: Sat Jan 13 07:59:19 2007 +0100
15414 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
15416 Now the board revision and the current PCI bus speed are printed after
15419 Also the EBC initialising is now done via defines in the board config
15422 Signed-off-by: Stefan Roese <sr@denx.de>
15424 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
15425 Author: Stefan Roese <sr@denx.de>
15426 Date: Sat Jan 13 07:57:51 2007 +0100
15428 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
15430 Now the board revision and the current PCI bus speed are printed after
15433 Signed-off-by: Stefan Roese <sr@denx.de>
15435 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
15436 Author: Heiko Schocher <hs@pollux.denx.de>
15437 Date: Thu Jan 11 15:44:44 2007 +0100
15439 Added support for the SOLIDCARD III board from Eurodesign
15441 Signed-off-by: Heiko Schocher <hs@denx.de>
15443 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
15444 Author: Reinhard Thies <Reinhard.Thies@web.de>
15445 Date: Wed Jan 10 14:41:14 2007 +0100
15447 Adjusted default environment for cam5200 board.
15449 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
15450 Author: Wolfgang Denk <wd@pollux.denx.de>
15451 Date: Wed Jan 10 15:35:52 2007 +0100
15455 commit 787fa15860a57833e50bd30555079a9cd4e519b8
15456 Author: Wolfgang Denk <wd@pollux.denx.de>
15457 Date: Wed Jan 10 01:28:39 2007 +0100
15459 Fix auto_update for MCC200 board.
15461 The invocation of do_auto_update() is moved to the end of the
15462 misc_init_r() function, after the flash mappings have been
15463 initialized. Please find attached a patch that implements that
15466 Also correct the decoding of the keypad status. With this update, the
15467 key that will trigger the update is Column 2, Row 2.
15469 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
15470 Author: Marian Balakowicz <m8@semihalf.com>
15471 Date: Wed Jan 10 00:26:15 2007 +0100
15473 CAM5200 flash driver modifications:
15474 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
15475 - add second build target 'cam5200_niosflash' which still uses custom driver
15477 commit 67fea022fa957f59653b5238c7496f80a6b70432
15478 Author: Markus Klotzbuecher <mk@denx.de>
15479 Date: Tue Jan 9 16:02:48 2007 +0100
15481 SPC1920: cleanup memory contoller setup
15483 commit 8fc2102faa23593c80381437c09f7745a14deb40
15484 Author: Markus Klotzbuecher <mk@denx.de>
15485 Date: Tue Jan 9 14:57:14 2007 +0100
15487 Fix the cpu speed setup to work with all boards.
15489 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
15490 Author: Markus Klotzbuecher <mk@denx.de>
15491 Date: Tue Jan 9 14:57:13 2007 +0100
15493 SPC1920: add support for the FM18L08 Ramtron FRAM
15495 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
15496 Author: Markus Klotzbuecher <mk@denx.de>
15497 Date: Tue Jan 9 14:57:13 2007 +0100
15499 SPC1920: update the HPI register addresses to work with the second
15500 generation of hardware
15502 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
15503 Author: Markus Klotzbuecher <mk@creamnet.de>
15504 Date: Tue Jan 9 14:57:13 2007 +0100
15506 Miscellanious spc1920 related cleanups
15508 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
15509 Author: Markus Klotzbuecher <mk@denx.de>
15510 Date: Tue Jan 9 14:57:12 2007 +0100
15512 SPC1920 GO/NOGO led should be set to color red in U-Boot
15514 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
15515 Author: Markus Klotzbuecher <mk@creamnet.de>
15516 Date: Tue Jan 9 14:57:12 2007 +0100
15518 Add support for the DS3231 RTC
15520 commit 8139567b60d678584b05f0718a681f2047c5e14f
15521 Author: Markus Klotzbuecher <mk@creamnet.de>
15522 Date: Tue Jan 9 14:57:11 2007 +0100
15524 SMC1 uses external CLK4 instead of BRG on spc1920
15526 commit d8d9de1a02fbd880b613d607143d1f57342affc7
15527 Author: Markus Klotzbuecher <mk@creamnet.de>
15528 Date: Tue Jan 9 14:57:10 2007 +0100
15530 Update the SPC1920 CMB PLD driver
15532 commit 3f34f869162750e5e999fd140f884f5de952bcfe
15533 Author: Markus Klotzbuecher <mk@creamnet.de>
15534 Date: Tue Jan 9 14:57:10 2007 +0100
15536 Add / enable I2C support on the spc1920 board
15538 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
15539 Author: Markus Klotzbuecher <mk@creamnet.de>
15540 Date: Tue Jan 9 14:57:10 2007 +0100
15542 Add support for the tms320671x host port interface (HPI)
15544 commit f4eb54529bb3664c3a562e488b460fe075f79d67
15545 Author: Wolfgang Denk <wd@pollux.denx.de>
15546 Date: Sun Jan 7 00:13:11 2007 +0100
15548 Prepare for release 1.2.0
15550 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
15551 Author: Stefan Roese <sr@denx.de>
15552 Date: Sat Jan 6 15:58:09 2007 +0100
15554 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
15556 This patch fixes a problem with an incorrect setup for the refresh
15557 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
15559 Signed-off-by: Stefan Roese <sr@denx.de>
15561 commit f16c1da9577f06c5fc08651a4065537407de4635
15562 Author: Stefan Roese <sr@denx.de>
15563 Date: Sat Jan 6 15:56:13 2007 +0100
15565 [PATCH] Update ALPR board files
15567 This update brings the ALPR board support to the newest version.
15568 It also fixes a problem with the NAND driver.
15570 Signed-off-by: Stefan Roese <sr@denx.de>
15572 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
15573 Author: Stefan Roese <sr@denx.de>
15574 Date: Fri Jan 5 11:46:05 2007 +0100
15576 [PATCH] nand: Fix problem with oobsize calculation
15578 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
15580 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
15581 returns a 0x15. In the code fragment below bits [1:0] determine the
15582 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
15583 next field is also ANDed with 0x3. However this is a one bit field
15584 as defined in the Hynix and Samsung parts in the 4th ID byte that
15585 determins the oobsize, not a two bit field. It works on Samsung as
15586 bits[3:2] are 01. However for the Hynix there is a 11 in these two
15587 bits, so the oob size gets messed up.
15589 I checked the correct linux code and the suggested fix from Brian is
15590 also available in the linux nand mtd driver.
15592 Signed-off-by: Stefan Roese <sr@denx.de>
15594 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
15595 Author: Stefan Roese <sr@denx.de>
15596 Date: Fri Jan 5 10:40:36 2007 +0100
15598 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
15600 This fix will make the MAL burst disabling patch for the Linux
15601 EMAC driver obsolete.
15603 Signed-off-by: Stefan Roese <sr@denx.de>
15605 commit 023889838282b6237b401664f22dd22dfba2c066
15606 Author: Stefan Roese <sr@denx.de>
15607 Date: Fri Jan 5 10:38:05 2007 +0100
15609 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
15611 This code will optimize the DDR2 controller setup on a board specific
15614 Note: This code doesn't work right now on the NAND booting image for the
15615 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
15617 Signed-off-by: Stefan Roese <sr@denx.de>
15619 commit cce4acbb68398634b8d011ed7bb0d12269c84230
15620 Author: Bartlomiej Sieka <tur@semihalf.com>
15621 Date: Thu Dec 28 19:08:21 2006 +0100
15624 - fix a typo in V38B config file
15625 - move watchdog initialisation earlier in the boot process
15626 - add "wdt=off" to default kernel command line (disables kernel watchdog)
15628 commit 92eb729bad876725aeea908d2addba0800620840
15629 Author: Wolfgang Denk <wd@pollux.denx.de>
15630 Date: Wed Dec 27 01:26:13 2006 +0100
15632 Fix bug in adaption of Stefano Babic's CFI driver patch.
15634 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
15635 Author: Wolfgang Denk <wd@pollux.denx.de>
15636 Date: Sun Dec 24 01:42:57 2006 +0100
15638 Minor code cleanup.
15640 commit d784fdb05900ada3686d5778783e1fb328e9fb66
15641 Author: Stefano Babic <sbabic@denx.de>
15642 Date: Tue Dec 12 00:22:42 2006 +0100
15644 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
15646 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
15647 Author: Stefan Roese <sr@denx.de>
15648 Date: Fri Dec 22 14:29:40 2006 +0100
15650 [PATCH] Fix sequoia flash autodetection (finally correct)
15652 Now 32MByte and 64MByte FLASH is know to work and other
15653 configurations should work too.
15655 Signed-off-by: Stefan Roese <sr@denx.de>
15657 commit 82e5236a8b719543643fd26d5827938ab2b94818
15658 Author: Wolfgang Denk <wd@pollux.denx.de>
15659 Date: Fri Dec 22 10:30:26 2006 +0100
15661 Minor code cleanup; update CHANGELOG.
15663 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
15664 Author: Heiko Schocher <hs@pollux.denx.de>
15665 Date: Thu Dec 21 17:17:02 2006 +0100
15667 Added support for the TQM8272 board from TQ
15669 Signed-off-by: Heiko Schocher <hs@denx.de>
15671 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
15672 Author: Heiko Schocher <hs@pollux.denx.de>
15673 Date: Thu Dec 21 16:14:48 2006 +0100
15675 [PATCH] Add support for the UC101 board from MAN.
15677 Signed-off-by: Heiko Schocher <hs@denx.de>
15679 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
15680 Author: Bartlomiej Sieka <tur@semihalf.com>
15681 Date: Wed Dec 20 00:29:43 2006 +0100
15683 Fix to make the baudrate changes immediate for the MCF52x2 family.
15685 commit daa6e418bcc0c717752e8de939c213c790286096
15686 Author: Bartlomiej Sieka <tur@semihalf.com>
15687 Date: Wed Dec 20 00:27:32 2006 +0100
15689 Preliminary support for the iDMR board (ColdFire).
15691 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
15692 Author: Andrei Safronov <safronov@pollux.denx.de>
15693 Date: Fri Dec 8 16:23:08 2006 +0100
15695 automatic update mechanism
15697 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
15698 Author: roy zang <tie-fei.zang@freescale.com>
15699 Date: Mon Dec 4 17:56:59 2006 +0800
15701 Slight code clean up.
15702 Add comments, delete duplicate define and remove spaces.
15703 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15705 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
15706 Author: roy zang <tie-fei.zang@freescale.com>
15707 Date: Mon Dec 4 17:54:21 2006 +0800
15709 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
15710 multiplier table can not refect the real PLL clock behavior of these
15711 processors. Please refer to the hardware specification for detailed
15712 information of the corresponding processors.
15713 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15715 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
15716 Author: roy zang <tie-fei.zang@freescale.com>
15717 Date: Mon Dec 4 14:46:23 2006 +0800
15719 Remove the static MAC address, ip address, server ip, netmask and
15720 gateway ip for network setting.
15721 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15723 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
15724 Author: roy zang <tie-fei.zang@freescale.com>
15725 Date: Mon Dec 4 14:33:08 2006 +0800
15727 Remove the duplicate memory test code for mpc744ihpc2 board.
15728 If a memory test is needed, please use the functions in
15729 post/memory.c or memtest command.
15730 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15732 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
15733 Author: roy zang <tie-fei.zang@freescale.com>
15734 Date: Fri Dec 1 19:01:25 2006 +0800
15736 Fix the exception occuring in RAM table search issue.
15737 The original search_one_table() function code can only processes the search
15738 for the exception occurring in FLASH/ROM, because the exception and fixup
15739 table usually locate in FLASH. If the exception address is also in
15740 FLASH, it will be OK.
15741 If the exception occurs in RAM, after the u-boot relocation, a
15742 relocation offset should be added.
15744 clean up the code in cpu/74xx_7xx/cpu.c
15746 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15748 commit ee311214e0d216f904feea269599d0934bf71f23
15749 Author: roy zang <tie-fei.zang@freescale.com>
15750 Date: Fri Dec 1 11:47:36 2006 +0800
15752 Clean up the code according to codestyle:
15753 (1) remove some C++ comments.
15754 (2) remove trailing white space.
15755 (3) remove trailing empty line.
15756 (4) Indentation by table.
15757 (5) remove {} in one line condition.
15758 (6) add space before '(' in function call.
15759 Remove some weird printf () output.
15760 Add necessary comments.
15761 Modified Makefile to support building in a separate directory.
15763 commit dd520bf314c7add4183c5191692180f576f96b60
15764 Author: Wolfgang Denk <wd@pollux.denx.de>
15765 Date: Thu Nov 30 18:02:20 2006 +0100
15769 commit 8d9a8610b8256331132227e9e6585c6bd5742787
15770 Author: Wolfgang Denk <wd@pollux.denx.de>
15771 Date: Thu Nov 30 01:54:07 2006 +0100
15773 Code cleanup. Update CHANGELOG.
15775 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
15776 Author: Grant Likely <grant.likely@secretlab.ca>
15777 Date: Wed Nov 29 16:23:42 2006 +0100
15779 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
15781 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
15782 not the XLB frequency.
15784 This patch depends on the previous patches for MPC52xx device tree support
15786 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15787 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
15789 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
15790 Author: Stefan Roese <sr@denx.de>
15791 Date: Wed Nov 29 15:42:37 2006 +0100
15793 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
15795 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
15796 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
15797 quite similar and share the same board directory "prodrive/p3mx"
15798 and the same config file "p3mx.h".
15800 Signed-off-by: Stefan Roese <sr@denx.de>
15802 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
15803 Author: Stefan Roese <sr@denx.de>
15804 Date: Wed Nov 29 12:53:15 2006 +0100
15806 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
15808 In the bootvx command the load address was only read from the env
15809 variable "loadaddr" and not optionally passed as paramter as described
15810 in the help. This is fixed with this patch. The behaviour is now the
15811 same as in the bootelf command.
15813 Signed-off-by: Stefan Roese <sr@denx.de>
15815 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
15816 Author: Stefan Roese <sr@denx.de>
15817 Date: Wed Nov 29 12:03:57 2006 +0100
15819 [PATCH] include/ppc440.h minor error affecting interrupts
15821 Fixed include/ppc440.c for UIC address Bug
15823 Corrects bug affecting the addresses for the universal interrupt
15824 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
15826 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
15827 Signed-off-by: Stefan Roese <sr@denx.de>
15829 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
15830 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
15831 Date: Tue Nov 28 16:17:27 2006 -0600
15833 Make fsl-i2c not conflict with SOFT I2C
15835 Signed-off-by: Timur Tabi <timur@freescale.com>
15837 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
15838 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
15839 Date: Tue Nov 28 16:17:18 2006 -0600
15841 Fix I2C master address initialization.
15843 Signed-off-by: Timur Tabi <timur@freescale.com>
15845 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
15846 Author: Kim Phillips <kim.phillips@freescale.com>
15847 Date: Tue Nov 28 23:31:19 2006 -0600
15849 Assign maintainers for mpc8349emds and mpc8360emds
15851 Dave for mpc8360emds, and me for mpc8349emds.
15853 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
15854 Author: Kim Phillips <kim.phillips@freescale.com>
15855 Date: Tue Nov 28 23:28:33 2006 -0600
15857 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
15859 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
15860 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
15862 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
15863 Author: Timur Tabi <timur@freescale.com>
15864 Date: Tue Nov 28 12:09:35 2006 -0600
15866 mpc83xx: Miscellaneous code style fixes
15868 Implement various code style fixes and similar changes.
15870 Signed-off-by: Timur Tabi <timur@freescale.com>
15872 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
15873 Author: Stefan Roese <sr@denx.de>
15874 Date: Tue Nov 28 17:55:49 2006 +0100
15876 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
15878 This patch adds the code and configuration necessary to boot with an
15879 arch/powerpc Linux kernel.
15881 Signed-off-by: Grant Likely <grant.likely@gmail.com>
15882 Acked-by: Jon Loeliger <jdl@freescale.com>
15884 commit e732faec95a83cb468b4850ae807c8301dde8f6a
15885 Author: Stefan Roese <sr@denx.de>
15886 Date: Tue Nov 28 16:09:24 2006 +0100
15888 [PATCH] PPC4xx: 440SP Rev. C detection added
15890 Signed-off-by: Stefan Roese <sr@denx.de>
15892 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
15893 Author: Stefan Roese <sr@denx.de>
15894 Date: Tue Nov 28 11:04:45 2006 +0100
15896 [PATCH] nand: Fix patch merge problem
15898 Signed-off-by: Stefan Roese <sr@denx.de>
15900 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
15901 Author: Stefan Roese <sr@denx.de>
15902 Date: Tue Nov 28 11:04:45 2006 +0100
15904 [PATCH] nand: Fix patch merge problem
15906 Signed-off-by: Stefan Roese <sr@denx.de>
15908 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
15909 Author: Wolfgang Denk <wd@pollux.denx.de>
15910 Date: Mon Nov 27 22:53:53 2006 +0100
15914 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
15915 Author: Stefan Roese <sr@denx.de>
15916 Date: Mon Nov 27 17:43:25 2006 +0100
15918 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
15920 Patch below corrects the setting of the zmiifer register, it was
15921 overwritting the register rather than ORing the settings.
15923 Signed-off-by: Neil Wilson <NWilson@airspan.com>
15924 Signed-off-by: Stefan Roese <sr@denx.de>
15926 commit d1a72545296800b7e219f93104ad5836f0003d66
15927 Author: Stefan Roese <sr@denx.de>
15928 Date: Mon Nov 27 17:34:10 2006 +0100
15930 [PATCH] Select NAND embedded environment from board configuration
15932 The current NAND Bootloader setup forces the environment
15933 variables to be in line with the bootloader. This change
15934 enables the configuration to be made in the board include
15935 file instead so that it can be individually enabled.
15937 Signed-off-by: Nick Spence <nick.spence@freescale.com>
15938 Signed-off-by: Stefan Roese <sr@denx.de>
15940 commit 15784862857c3c2214498defcfed84ff137fb81e
15941 Author: Stefan Roese <sr@denx.de>
15942 Date: Mon Nov 27 17:22:19 2006 +0100
15944 [PATCH] nand_wait() timeout fixes
15946 Two fixes for the nand_wait() function in
15947 drivers/nand/nand_base.c:
15949 1. Use correct timeouts. The original timeouts in Linux
15950 source are 400ms and 20ms not 40s and 20s
15952 2. Return correct error value in case of timeout. 0 is
15955 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
15956 Signed-off-by: Stefan Roese <sr@denx.de>
15958 commit da5553b095bf04f4f109ad7e565dae3aba47b230
15959 Author: Stefan Roese <sr@denx.de>
15960 Date: Mon Nov 27 17:04:06 2006 +0100
15962 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
15964 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
15965 arguments to bootm. It removes the getenv("disable_of") test that used
15966 to be used for this purpose.
15968 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15969 Acked-by: Jon Loeliger <jdl@freescale.com>
15971 commit a9398e018593782c5fa7d0741955fc1256b34c1e
15972 Author: Wolfgang Denk <wd@pollux.denx.de>
15973 Date: Mon Nov 27 15:32:42 2006 +0100
15975 Minor code cleanup. Update CHANGELOG.
15977 commit 1729b92cde575476684bffe819d0b7791b57bff2
15978 Author: Stefan Roese <sr@denx.de>
15979 Date: Mon Nov 27 14:52:04 2006 +0100
15981 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
15983 Signed-off-by: Stefan Roese <sr@denx.de>
15985 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
15986 Author: Stefan Roese <sr@denx.de>
15987 Date: Mon Nov 27 14:49:51 2006 +0100
15989 [PATCH] alpr: remove unused board specific flash driver
15991 Signed-off-by: Stefan Roese <sr@denx.de>
15993 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
15994 Author: Stefan Roese <sr@denx.de>
15995 Date: Mon Nov 27 14:48:41 2006 +0100
15997 [PATCH] 4xx: Fix problem with board specific reset code
15999 Signed-off-by: Stefan Roese <sr@denx.de>
16001 commit ec0c2ec725aec9524a177a77ce75559e644a931a
16002 Author: Stefan Roese <sr@denx.de>
16003 Date: Mon Nov 27 14:46:06 2006 +0100
16005 [PATCH] Remove testing 4xx enet PHY setup
16007 Signed-off-by: Stefan Roese <sr@denx.de>
16009 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
16010 Author: Stefan Roese <sr@denx.de>
16011 Date: Mon Nov 27 14:12:17 2006 +0100
16013 [PATCH] Update Prodrive ALPR board support (440GX)
16015 Signed-off-by: Stefan Roese <sr@denx.de>
16017 commit 58b485776698c3d71ec5a215e392123b4c15afa3
16018 Author: Markus Klotzbuecher <mk@denx.de>
16019 Date: Mon Nov 27 11:51:21 2006 +0100
16021 Add a small README with information on the generic ohci driver.
16023 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
16024 Author: Markus Klotzbuecher <mk@denx.de>
16025 Date: Mon Nov 27 11:46:46 2006 +0100
16027 Fix some endianness issues related to the generic ohci driver
16029 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
16030 Author: Markus Klotzbuecher <mk@denx.de>
16031 Date: Mon Nov 27 11:44:58 2006 +0100
16033 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
16034 to choose between the old and the generic OHCI drivers.
16036 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
16037 Author: Markus Klotzbuecher <mk@denx.de>
16038 Date: Mon Nov 27 11:43:09 2006 +0100
16040 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
16041 and adapted board configs TQM5200 and yosemite accordingly. This commit
16042 also makes the maximum number of root hub ports configurable
16043 (CFG_USB_OHCI_MAX_ROOT_PORTS).
16045 commit 78d620ebb5871d252270dedfad60c6568993b780
16046 Author: Wolfgang Denk <wd@atlas.denx.de>
16047 Date: Thu Nov 23 22:58:58 2006 +0100
16049 Updates for TQM5200 modules:
16050 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
16051 - simplify "udate" definitions
16053 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
16054 Author: Stefan Roese <sr@denx.de>
16055 Date: Wed Nov 22 13:20:50 2006 +0100
16057 [PATCH] PPC4xx start.S: Fix for processor errata
16059 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
16060 errata 1.12: 440_33 by moving patch up in code.
16062 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
16063 Signed-off-by: Stefan Roese <sr@denx.de>
16065 commit 4ef6251403f637841000e0fef9e832aa01339822
16066 Author: Stefan Roese <sr@denx.de>
16067 Date: Mon Nov 20 20:39:52 2006 +0100
16069 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
16071 Signed-off-by: Stefan Roese <sr@denx.de>
16073 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
16074 Author: Wolfgang Denk <wd@pollux.denx.de>
16075 Date: Mon Nov 20 10:28:30 2006 +0100
16079 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
16080 Author: Stefan Roese <sr@denx.de>
16081 Date: Mon Nov 13 13:55:24 2006 +0100
16083 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
16085 * Adds support for AMD command set Top Boot flash geometry reversal
16086 * Adds support for reading JEDEC Manufacturer ID and Device ID
16087 * Adds support for displaying command set, manufacturer id and
16088 device ids (flinfo)
16089 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
16090 * Removes outdated change history (refer to git log instead)
16092 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
16093 Signed-off-by: Stefan Roese <sr@denx.de>
16095 commit b21b511d4c50408f4853f46f06b601272196223f
16096 Author: Wolfgang Denk <wd@pollux.denx.de>
16097 Date: Sun Nov 12 21:13:23 2006 +0100
16101 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
16102 Author: Bartlomiej Sieka <tur@semihalf.com>
16103 Date: Sat Nov 11 22:48:22 2006 +0100
16105 Disable the watchdog in the default config for the V38B board.
16107 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
16108 Author: Bartlomiej Sieka <tur@semihalf.com>
16109 Date: Sat Nov 11 22:43:00 2006 +0100
16111 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
16112 group is enabled for USB earlier (in cpu_init_f() instead of
16113 usb_lowlevel_init()).
16115 commit 91650b3e4de688038d4f71279c44858e3e2c6870
16116 Author: Wolfgang Denk <wd@pollux.denx.de>
16117 Date: Mon Nov 6 17:06:36 2006 +0100
16119 Sequential accesses to non-existent memory must be synchronized,
16120 at least on G2 cores.
16122 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
16124 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
16125 Author: Timur Tabi <timur@freescale.com>
16126 Date: Fri Nov 3 19:15:00 2006 -0600
16128 mpc83xx: Update 83xx to use fsl_i2c.c
16130 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
16131 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
16132 Added multiple I2C bus support to fsl_i2c.c.
16134 Signed-off-by: Timur Tabi <timur@freescale.com>
16136 commit d239d74b1c937984bc519083a8e7de373a390f06
16137 Author: Timur Tabi <timur@freescale.com>
16138 Date: Fri Nov 3 12:00:28 2006 -0600
16140 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
16142 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
16143 tree matches the other 8xxx trees.
16145 Signed-off-by: Timur Tabi <timur@freescale.com>
16147 commit f7fb2e703ec9688541416962724adff70a7322cb
16148 Author: Kim Phillips <kim.phillips@freescale.com>
16149 Date: Thu Nov 2 19:47:11 2006 -0600
16151 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
16153 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
16154 Author: Dave Liu <daveliu@freescale.com>
16155 Date: Thu Nov 2 18:05:50 2006 -0600
16157 mpc83xx: Fix the incorrect dcbz operation
16159 The 834x rev1.x silicon has one CPU5 errata.
16161 The issue is when the data cache locked with
16162 HID0[DLOCK], the dcbz instruction looks like no-op inst.
16164 The right behavior of the data cache is when the data cache
16165 Locked with HID0[DLOCK], the dcbz instruction allocates
16168 The 834x rev3.0 and later and 8360 have not this bug inside.
16170 So, when 834x rev3.0/8360 are working with ECC, the dcbz
16171 instruction will corrupt the stack in cache, the processor will
16174 However, the 834x rev1.x can work with ECC with these code,
16175 because the sillicon has this cache bug. The dcbz will not
16176 corrupt the stack in cache.
16177 Really, it is the fault code running on fault sillicon.
16179 This patch fix the incorrect dcbz operation. Instead of
16180 CPU FP writing to initialise the ECC.
16183 * Fix the incorrect dcbz operation instead of CPU FP
16184 writing to initialise the ECC memory. Otherwise, it
16185 will corrupt the stack in cache, The processor will checkstop
16188 Signed-off-by: Dave Liu <daveliu@freescale.com>
16190 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
16191 Author: Kim Phillips <kim.phillips@freescale.com>
16192 Date: Wed Nov 1 00:10:40 2006 -0600
16194 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
16196 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
16197 STDOUT_PATH configuration bits to mpc8349emds,
16198 mpc8349itx, and mpc8360emds board code.
16200 redo environment to use bootm with the fdtaddr
16201 for booting ARCH=powerpc kernels by default,
16202 and provide default fdtaddr values.
16204 commit 48041365b3420589ad464ebc7752e0053538b729
16205 Author: Kim Phillips <kim.phillips@freescale.com>
16206 Date: Wed Nov 1 00:07:25 2006 -0600
16208 mpc83xx: change ft code to modify local-mac-address property
16210 Update 83xx OF code to update local-mac-address properties
16211 for ethernet instead of the obsolete 'address' property.
16213 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
16214 Author: Timur Tabi <timur@freescale.com>
16215 Date: Tue Oct 31 21:23:16 2006 -0600
16217 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
16219 This patch also adds an improved I2C set_speed(), which handles all clock
16222 Signed-off-by: Timur Tabi <timur@freescale.com>
16224 commit ac4b5622ce050b5ee1e154b98df630d778661632
16225 Author: Dave Liu <daveliu@freescale.com>
16226 Date: Tue Oct 31 19:54:59 2006 -0600
16228 mpc83xx: add the README.mpc8360emds
16230 add doc/README.mpc8360emds to accompany the new board support
16232 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
16233 Author: Dave Liu <daveliu@freescale.com>
16234 Date: Fri Nov 3 12:11:15 2006 -0600
16236 mpc83xx: add QE ethernet support
16238 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
16240 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
16241 Author: Dave Liu <daveliu@freescale.com>
16242 Date: Fri Nov 3 19:33:44 2006 -0600
16244 mpc83xx: Add MPC8360EMDS basic board support
16246 Add support for the Freescale MPC8360EMDS board.
16247 Includes DDR, DUART, Local Bus, PCI.
16249 commit 23892e49352de74f7fac36ff90bb1be143d195e3
16250 Author: Dave Liu <daveliu@freescale.com>
16251 Date: Tue Oct 31 19:30:40 2006 -0600
16253 mpc83xx: add the QUICC Engine (QE) immap file
16255 common QE immap file. Also required for 8360.
16257 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
16258 Author: Dave Liu <daveliu@freescale.com>
16259 Date: Tue Oct 31 19:25:38 2006 -0600
16261 mpc83xx: Add 8360 specifics to 83xx immap
16263 Mainly add QE device dependencies, with appropriate 8360 protection.
16266 commit 988833324a7fda482c8ac3ca23eb539f8232e404
16267 Author: Timur Tabi <timur@freescale.com>
16268 Date: Tue Oct 31 19:14:41 2006 -0600
16270 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
16272 PREREQUISITE PATCHES:
16274 * This patch can only be applied after the following patches have been applied:
16276 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
16277 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
16281 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
16282 the clock for the 2nd USB board (Linux kernel will hang otherwise),
16283 and fix the CONFIG_BOOTARGS macro.
16285 Signed-off-by: Timur Tabi <timur@freescale.com>
16287 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
16288 Author: Timur Tabi <timur@freescale.com>
16289 Date: Tue Oct 31 18:44:42 2006 -0600
16291 mpc83xx: Add support for the MPC8349E-mITX
16293 PREREQUISITE PATCHES:
16295 * This patch can only be applied after the following patches have been applied:
16297 1) DNX#2006090742000024 "Add support for multiple I2C buses"
16298 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
16299 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
16300 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
16301 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
16305 * Add support for the Freescale MPC8349E-mITX reference design platform.
16306 The second TSEC (Vitesse 7385 switch) is not supported at this time.
16308 Signed-off-by: Timur Tabi <timur@freescale.com>
16310 commit 183da6d9b446cc12123455844ad1187e2375626f
16311 Author: Ben Warren <bwarren@qstreams.com>
16312 Date: Tue Sep 12 10:15:53 2006 -0400
16314 Additional MPC8349 support for multibus i2c
16318 Here is a patch for a file that was accidentally left out of a previous
16321 It accompanies the patch with ticket DNX#2006090742000024
16324 Change PCI initialization to use new multi-bus I2C API.
16329 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
16330 Author: Ben Warren <bwarren@qstreams.com>
16331 Date: Thu Sep 7 16:51:04 2006 -0400
16333 Multi-bus I2C implementation of MPC834x
16337 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
16338 family and the MPC8349EMDS board in particular.
16339 This patch requires Patch 1 (Add support for multiple I2C buses).
16340 Testing was performed on a 533MHz board.
16342 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
16344 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16347 Implemented driver-level code to support two I2C buses on the
16348 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
16349 are 50kHz, 100kHz and 400kHz on each bus.
16354 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
16355 Author: Ben Warren <bwarren@qstreams.com>
16356 Date: Thu Sep 7 16:50:54 2006 -0400
16358 Add support for multiple I2C buses
16362 Attached is a patch providing support for multiple I2C buses at the
16363 command level. The second part of the patch includes an implementation
16364 for the MPC834x CPU and MPC8349EMDS board.
16366 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
16368 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16372 1. Include new 'i2c' command (based on USB implementation) using
16373 CONFIG_I2C_CMD_TREE.
16375 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
16376 the commands to change bus number and speed are only available under the
16377 new 'i2c' command mentioned in the first bullet.
16379 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
16380 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
16381 of an array of bus-device pairs. Otherwise, it is an array of uchar.
16384 Added new 'i2c' master command for all I2C interaction. This is
16385 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
16386 setting I2C bus speed as well as changing the active bus if the board
16387 has more than one (conditionally compiled with
16388 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
16394 commit bed85caf872714ebf53013967a695c9d63acfc68
16395 Author: Timur Tabi <timur@freescale.com>
16396 Date: Tue Oct 31 18:13:36 2006 -0600
16398 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
16402 * Errata DDR6, which affects all current MPC 834x processors, lists changes
16403 required to maintain compatibility with various types of DDR memory. This
16404 patch implements those changes.
16406 Signed-off-by: Timur Tabi <timur@freescale.com>
16408 commit afd6e470f639883002c7c59d562690a5cb0f4865
16409 Author: Timur Tabi <timur@freescale.com>
16410 Date: Wed Oct 25 18:45:23 2006 -0500
16412 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
16414 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
16415 Author: Timur Tabi <timur@freescale.com>
16416 Date: Tue Aug 22 17:07:00 2006 -0500
16418 mpc83xx: Add support for variable flash memory sizes on 83xx systems
16422 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
16423 window registers, instead of using a hard-coded value of 8MB.
16425 Signed-off-by: Timur Tabi <timur@freescale.com>
16427 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
16428 Author: Tanya Jiang <tanya.jiang@freescale.com>
16429 Date: Thu Aug 3 18:38:13 2006 +0800
16431 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
16433 Unified TQM834x variable names with 83xx and consolidated macro
16434 in preparation for the 8360 and other upcoming 83xx devices.
16436 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
16438 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
16439 Author: Dave Liu <daveliu@freescale.com>
16440 Date: Wed Oct 25 14:41:21 2006 -0500
16442 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
16444 Incorporated the common unified variable names and the changes in preparation
16445 for releasing mpc8360 patches.
16447 Signed-off-by: Dave Liu <daveliu@freescale.com>
16449 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
16450 Author: Tanya Jiang <tanya.jiang@freescale.com>
16451 Date: Thu Aug 3 18:36:02 2006 +0800
16453 mpc83xx: Fix missing build for mpc8349emds pci.c
16455 Make pci build for mpc8349emds
16457 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
16459 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
16460 Author: Tanya Jiang <tanya.jiang@freescale.com>
16461 Date: Thu Aug 3 18:39:49 2006 +0800
16463 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
16465 Removed unused file resetvec.S for mpc83xx cpu
16467 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
16469 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
16470 Author: Nick Spence <Nick.Spence@freescale.com>
16471 Date: Sat Sep 30 00:32:59 2006 -0700
16473 NAND Flash verify across block boundaries
16475 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
16477 and the write crosses a block boundary. The pointer to the verification
16478 buffer (bufstart) is not being updated to reflect the starting of the
16480 block so the verification of the second block fails.
16484 * Fix NAND FLASH page verification across block boundaries
16486 commit f484dc791a3932537213c43c654cc1295c64b84c
16487 Author: Nick Spence <nick.spence@freescale.com>
16488 Date: Thu Sep 7 07:39:46 2006 -0700
16490 Added RGMII support to the TSECs and Marvell 881111 Phy
16492 Added a phy initialization to adjust the RGMII RX and TX timing
16493 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
16495 Signed-off-by: Nick Spence <nick.spence@freescale.com>
16497 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
16498 Author: roy zang <tie-fei.zang@freescale.com>
16499 Date: Fri Nov 3 13:10:00 2006 +0800
16501 Remove some unused CFG define.
16502 undef CFG_DRAM_TEST
16504 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
16505 Author: roy zang <tie-fei.zang@freescale.com>
16506 Date: Fri Nov 3 13:07:36 2006 +0800
16508 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
16509 Both work. 0xFF000000 seems more reasonable.
16511 commit c59200443072353044aa4bf737a5a60f9a9af231
16512 Author: Wolfgang Denk <wd@pollux.denx.de>
16513 Date: Thu Nov 2 15:15:01 2006 +0100
16515 Release U-Boot 1.1.6
16517 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
16518 Author: roy zang <tie-fei.zang@freescale.com>
16519 Date: Thu Nov 2 19:14:48 2006 +0800
16521 This patch comes from Yuli's posted patch on 8/8/2006
16522 titled "CFI Driver Little-Endian write Issue".
16524 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
16526 If that patch applied, please discard this one.
16527 Until now , I do not see his patch is applied. So please apply this one.
16529 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
16530 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16532 commit b825f158e449e1e9cf74c08e572955e122394c96
16533 Author: roy zang <tie-fei.zang@freescale.com>
16534 Date: Thu Nov 2 19:12:31 2006 +0800
16536 Tsi108 on chip i2c support.
16538 The i2c Interface provides a master-only, serial interface that can be
16539 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
16542 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16543 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16545 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
16546 Author: roy zang <tie-fei.zang@freescale.com>
16547 Date: Thu Nov 2 19:11:06 2006 +0800
16549 Tsi108 on chip pci controller support.
16551 If there is no pci card, the tsi108/109 pci configure read will
16552 cause a machine check exception to the processor. PCI error should
16553 also be cleared after the read.
16555 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16556 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16558 commit d1927cee977126e547ceeba23e4f978f377cfb8f
16559 Author: roy zang <tie-fei.zang@freescale.com>
16560 Date: Thu Nov 2 19:08:55 2006 +0800
16562 Tundra tsi108 on chip Ethernet controller support.
16564 The following is a brief description of the Ethernet controller:
16565 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
16566 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
16567 to manage the two physical connection devices (PHYs). Each Ethernet port
16568 has its own statistics monitor that tracks and reports key interface
16569 statistics. Each port supports a 256-entry hash table for address
16570 filtering. In addition, each port is bridged to the Switch Fabric
16571 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
16573 Each Ethernet port also has a pair of internal Ethernet DMA channels to
16574 support the transmit and receive data flows. The Ethernet DMA channels
16575 use descriptors set up in memory, the memory map of the device, and
16576 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
16577 handles arbitration for the Switch Fabric. The Controller also
16578 has a register businterface for register accesses and status monitor
16581 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
16582 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
16583 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
16584 data flows to and from the Ethernet Controller through the Switch Fabric.
16586 Each Ethernet port uses its transmit and receive DMA channels to manage
16587 data flows through buffer descriptors that are predefined by the
16588 system (the descriptors can exist anywhere in the system memory map).
16589 These descriptors are data structures that point to buffers filled
16590 with data ready to transmit over Ethernet, or they point to empty
16591 buffers ready to receive data from Ethernet.
16593 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16594 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16596 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
16597 Author: roy zang <tie-fei.zang@freescale.com>
16598 Date: Thu Nov 2 19:01:33 2006 +0800
16600 Tundra tsi108 header file.
16602 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
16603 PowerPC processors that offers numerous system interconnect options for
16604 embedded application designers. The Tsi108 can interconnect 60x or
16605 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
16606 and Flash. Provided the macro define for tsi108 chip.
16608 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16609 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16611 commit 87c4db09699c6b89176b31004afcb83eb1585d47
16612 Author: roy zang <tie-fei.zang@freescale.com>
16613 Date: Thu Nov 2 18:59:15 2006 +0800
16615 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16616 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
16618 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16619 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16621 commit 27801b8ab11c61b577e45742a515bb3b23b80241
16622 Author: roy zang <tie-fei.zang@freescale.com>
16623 Date: Thu Nov 2 18:57:21 2006 +0800
16625 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16626 Make ,config.mk and link file for the mpc7448hpc2 board.
16628 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16629 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16631 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
16632 Author: roy zang <tie-fei.zang@freescale.com>
16633 Date: Thu Nov 2 18:55:04 2006 +0800
16635 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16636 The mpc7448hpc2 board support header file.
16638 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16639 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16641 commit 625bb5ddb50b243f931262ca8c46956409471917
16642 Author: roy zang <tie-fei.zang@freescale.com>
16643 Date: Thu Nov 2 18:52:21 2006 +0800
16645 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
16646 The mpc7448hpc2 board support low level assemble language init code.
16648 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16649 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16651 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
16652 Author: roy zang <tie-fei.zang@freescale.com>
16653 Date: Thu Nov 2 18:49:51 2006 +0800
16655 General code modification for mpc7448hpc2 board support.
16656 1. Add 7447A and 7448 processor support.
16657 2. Add the following flags.
16659 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
16660 (such as by switch on board), this flag should be set.
16662 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
16663 relocates to RAM, this flag should be set.
16665 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
16666 system hang in exception, this flag should be set.
16668 There is a design issue for tsi108/109 pci configure read. When pci scan
16669 the slots, if there is no pci card, the tsi108/9 will cause a machine
16670 check exception for mpc7448 processor.
16672 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
16673 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16675 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
16676 Author: roy zang <tie-fei.zang@freescale.com>
16677 Date: Thu Nov 2 18:34:47 2006 +0800
16679 Add README file for mpc7448hpc2 board.
16680 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16682 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
16683 Author: Bartlomiej Sieka <tur@semihalf.com>
16684 Date: Wed Nov 1 02:04:38 2006 +0100
16686 Finish up support for MarelV38B board
16687 - add watchdog support
16688 - enable GPIO_WKUP_7 pin for input
16691 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
16692 Author: Bartlomiej Sieka <tur@semihalf.com>
16693 Date: Wed Nov 1 01:45:46 2006 +0100
16695 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
16696 * remove warnings when compiling ethaddr.c
16697 * adjust linker script (fixes a crash resulting from incorrect
16698 definition of __u_boot_cmd_start)
16699 - Some MarelV38B code cleanup.
16701 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
16702 Author: Bartlomiej Sieka <tur@semihalf.com>
16703 Date: Wed Nov 1 01:38:16 2006 +0100
16705 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
16706 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
16707 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
16708 MPC5XXX_WU_GPIO_DATA_O for affected boards.
16710 - Add defintions for some MPC5XXX GPIO pins.
16712 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
16713 Author: Bartlomiej Sieka <tur@semihalf.com>
16714 Date: Wed Nov 1 01:34:29 2006 +0100
16716 Changed MarelV38B board make target to lowercase. Config file cleanup.
16718 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
16719 Author: Wolfgang Denk <wd@pollux.denx.de>
16720 Date: Sun Oct 29 01:03:51 2006 +0200
16722 Automatically adjust ARFLAGS so "make -s" is really silent.
16724 commit fae684e89844856383bdf101440889557df3e6b1
16725 Author: Stefan Roese <sr@denx.de>
16726 Date: Sat Oct 28 16:45:00 2006 +0200
16728 [PATCH] omap925.c: Remove unused functions
16730 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16731 Signed-off-by: Stefan Roese <sr@denx.de>
16733 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
16734 Author: Stefan Roese <sr@denx.de>
16735 Date: Sat Oct 28 17:12:58 2006 +0200
16737 [PATCH] Add some missing machtypes for netstar & voiceblue boards
16739 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
16742 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16743 Signed-off-by: Stefan Roese <sr@denx.de>
16745 commit 856f054410cef52d868feb330168b2a4c4091328
16746 Author: Stefan Roese <sr@denx.de>
16747 Date: Sat Oct 28 15:55:52 2006 +0200
16749 [PATCH] NAND: Partition name support added to NAND subsystem
16751 chpart, nboot and NAND subsystem related commands now accept also partition
16752 name to specify offset.
16754 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16755 Signed-off-by: Stefan Roese <sr@denx.de>
16757 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
16758 Author: Wolfgang Denk <wd@pollux.denx.de>
16759 Date: Sat Oct 28 02:29:44 2006 +0200
16763 commit 2751a95abd1b96911081c357e96a12fa97b40dee
16764 Author: Wolfgang Denk <wd@pollux.denx.de>
16765 Date: Sat Oct 28 02:29:14 2006 +0200
16767 Enable commandline editing and hush shell on all TQM boards.
16769 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
16770 Author: Wolfgang Denk <wd@pollux.denx.de>
16771 Date: Sat Oct 28 02:28:02 2006 +0200
16773 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
16775 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
16776 Author: Wolfgang Denk <wd@denx.de>
16777 Date: Sat Oct 28 01:14:32 2006 +0200
16779 Check for illegal character '=' in environment variable names.
16781 Make sure the string passed as variable name does not contain a '='
16782 character. This not only prevents the common error or typing
16783 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
16784 also closes a backdoor which allowed to delete write-protected
16785 environment variables, for example by using "setenv ethaddr=".
16787 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
16788 Author: Wolfgang Denk <wd@pollux.denx.de>
16789 Date: Sat Oct 28 00:38:39 2006 +0200
16791 Minor code cleanup.
16793 commit e11887a77d81077416a2d1c5e0354916fee8c034
16794 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16795 Date: Thu Oct 26 17:55:31 2006 +0200
16797 Don't pass any debug options directly to the assembler
16799 When passing the -g option to gcc, gcc automatically selects a
16800 suitable --g<format> option to pass on to the assembler.
16801 Thus, there's no point in forcing a specific debug option on the
16802 assembler using the -Wa mechanism.
16804 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16806 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
16807 Author: Jon Loeliger <jdl@freescale.com>
16808 Date: Fri Oct 27 07:47:22 2006 -0500
16810 MPC86xx: Cleaned up unused and conditionally used local variables.
16812 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16814 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
16815 Author: Wolfgang Denk <wd@pollux.denx.de>
16816 Date: Fri Oct 27 11:55:21 2006 +0200
16818 Fix "ar" flags in some Makefiles to allow for silent "make -s"
16820 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
16821 Author: Ben Warren <bwarren@qstreams.com>
16822 Date: Thu Oct 26 14:38:25 2006 -0400
16824 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
16825 to a TSEC (e.g. a switch is connected via RMII) or
16826 if the PHY is defective/incorrectly configured.
16828 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16830 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
16831 Author: Ben Warren <bwarren@qstreams.com>
16832 Date: Thu Oct 26 14:38:25 2006 -0400
16834 Fix TSEC driver: avoid crashes if PHY is not attached
16835 to a TSEC (e.g. a switch is connected via RMII) or
16836 if the PHY is defective/incorrectly configured.
16838 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16840 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
16841 Author: Wolfgang Denk <wd@pollux.denx.de>
16842 Date: Thu Oct 26 16:24:31 2006 +0200
16846 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
16847 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16848 Date: Wed Oct 25 15:48:59 2006 +0200
16850 Finish up support for the ATSTK1000/ATSTK1002 boards
16852 Add atstk1002_config target to Makefile and move the AVR32 section
16853 down below Blackfin so that it doesn't end up in the middle of
16856 Drop the autogenerated linker script thing for now. Will have to
16857 revisit how to handle chips with different flash and RAM layout
16860 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16862 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
16863 Author: Kumar Gala <galak@kernel.crashing.org>
16864 Date: Tue Oct 24 23:47:37 2006 -0500
16866 Added support for Multi-Image files that contain a device tree
16868 If a Multi-Image file contains a third image we try to use it as a
16869 device tree. The device tree image is assumed to be uncompressed in the
16870 image file. We automatically allocate space for the device tree in memory
16871 and provide an 8k pad to allow more than a reasonable amount of growth.
16873 Additionally, a device tree that was contained in flash will now automatically
16874 get copied to system memory as part of boot. Previously an error was
16875 reported if one tried to boot a device tree that was in flash.
16877 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16879 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
16880 Author: Wolfgang Denk <wd@denx.de>
16881 Date: Tue Oct 24 21:35:55 2006 +0200
16883 Switch to automatically generated CHANGELOG file.
16884 (use "make CHANGELOG" to update it from time to time)
16886 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
16887 Author: Stefan Roese <sr@denx.de>
16888 Date: Tue Oct 24 18:06:48 2006 +0200
16890 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
16891 Patch by Stefan Roese, 24 Oct 2006
16893 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
16894 Author: Wolfgang Denk <wd@pollux.denx.de>
16895 Date: Tue Oct 24 17:24:55 2006 +0200
16897 Merge with /home/wd/git/u-boot/master
16899 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
16900 Author: Wolfgang Denk <wd@pollux.denx.de>
16901 Date: Tue Oct 24 15:32:57 2006 +0200
16905 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
16906 Author: Wolfgang Denk <wd@pollux.denx.de>
16907 Date: Tue Oct 24 14:51:36 2006 +0200
16909 Move atstk1000 files into vendor specific directory.
16910 Patch by Haavard Skinnemoen, 12 Sep 2006
16912 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
16913 Author: Wolfgang Denk <wd@pollux.denx.de>
16914 Date: Tue Oct 24 14:42:37 2006 +0200
16916 Add ATSTK1000 and ATSTK1002 board support
16917 Patch by Haavard Skinnemoen, 06 Sep 2006
16919 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
16922 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
16923 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
16924 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
16925 CompactFlash cards. For more information, please see this page:
16927 http://www.atmel.com/dyn/products/tools.asp?family_id=682
16929 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
16932 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16934 commit f93ae788c3640fcde5db383471d45548ff4060d0
16935 Author: Wolfgang Denk <wd@pollux.denx.de>
16936 Date: Tue Oct 24 14:31:24 2006 +0200
16938 Add common serial driver for Atmel AT32 and AT91 chips
16939 Patch by Haavard Skinnemoen, 06 Sep 2006
16941 This is a first attempt at creating a common serial driver for Atmel
16942 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
16943 be possible to support AT91RM9200 and other ARM-based chips with some
16944 minor modifications.
16946 There's nothing fundamentally AVR32-specific in this driver, but it
16947 does use some features which are currently only defined for the
16949 * pm_get_clock_freq: Obtain the clock frequency of a given domain
16950 * gd->console_uart: A "struct device" containing information about
16951 register mappings, gpio resources and clocks associated with the
16954 For more information about these features, please see the "AT32AP
16957 commit 72a087e04705c26cad982879ebd06b5281bf825a
16958 Author: Wolfgang Denk <wd@pollux.denx.de>
16959 Date: Tue Oct 24 14:27:35 2006 +0200
16961 Add AT32AP CPU and AT32AP7000 SoC support
16962 Patch by Haavard Skinnemoen, 06 Sep 2006
16964 This patch adds support for the AT32AP CPU family and the AT32AP7000
16965 chip, which is the first chip implementing the AVR32 architecture.
16967 The AT32AP CPU core is a high-performance implementation featuring a
16968 7-stage pipeline, separate instruction- and data caches, and a MMU.
16969 For more information, please see the "AVR32 AP Technical Reference":
16971 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
16973 In addition to this, the AT32AP7000 chip comes with a large set of
16974 integrated peripherals, many of which are shared with the AT91 series
16975 of ARM-based microcontrollers from Atmel. Full data sheet is
16978 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
16980 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16982 commit 7b64fef33c66be648826c0ff9758298ef13d0604
16983 Author: Wolfgang Denk <wd@pollux.denx.de>
16984 Date: Tue Oct 24 14:21:16 2006 +0200
16986 Add AVR32 architecture support
16987 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
16989 This patch adds common infrastructure code for the Atmel AVR32
16990 architecture. See doc/README.AVR32 for details.
16992 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16994 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
16995 Author: Wolfgang Denk <wd@pollux.denx.de>
16996 Date: Tue Oct 24 13:57:33 2006 +0200
16998 Use -g instead of -gstabs in AFLAGS_DEBUG
16999 Patch by Haavard Skinnemoen, 30 Aug 2006
17001 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
17002 matter what the target's preferred debugging format is. This patch
17003 simply replaces -gstabs with -g, so that the default debugging format
17004 for the architecture is used.
17006 commit 965829872169c2996023840d98e1d85ad148d629
17007 Author: Wolfgang Denk <wd@pollux.denx.de>
17008 Date: Tue Oct 24 13:55:18 2006 +0200
17010 Fix/workaround broken dependency handling with make 3.81
17011 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
17013 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
17014 Author: Marian Balakowicz <m8@semihalf.com>
17015 Date: Mon Oct 23 22:17:05 2006 +0200
17017 Fix sequoia separate object direcory building problems.
17019 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
17020 Author: Jon Loeliger <jdl@freescale.com>
17021 Date: Fri Oct 20 17:16:35 2006 -0500
17023 Use generic I2C register block on 85xx and 86xx.
17025 Replace private IMMAP I2C structures with generic reg block
17026 and allow 86xx to have multiple I2C device busses.
17028 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17030 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
17031 Author: Jon Loeliger <jdl@freescale.com>
17032 Date: Fri Oct 20 15:54:34 2006 -0500
17034 Fix compilation warnings on a few 85xx boards.
17036 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17038 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
17039 Author: Jon Loeliger <jdl@freescale.com>
17040 Date: Fri Oct 20 15:50:15 2006 -0500
17042 Converted all 85xx boards to use a common FSL I2C driver.
17043 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
17044 And removed hard i2c path from a few u-boot.lds scipts too.
17045 Minor whitespace cleanups along the way.
17047 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17049 commit 4d45f69e362b05892c9e92a7907e5820995612aa
17050 Author: Jon Loeliger <jdl@freescale.com>
17051 Date: Thu Oct 19 12:02:24 2006 -0500
17053 Rewrite a series of goto statements as a sequences of
17054 conditional expressions instead.
17056 Use consistent return code 0/-1 for good/bad indicators.
17058 Include one fewer file if the driver isn't used at all.
17060 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17062 commit 7237c033b02fe295880435f1eb80819a0c987532
17063 Author: Jon Loeliger <jdl@freescale.com>
17064 Date: Thu Oct 19 11:02:16 2006 -0500
17066 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
17068 in an effort to begin to unify the umpteen FSL I2C drivers that
17069 are all otherwise very similar.
17071 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17073 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
17074 Author: Jon Loeliger <jdl@freescale.com>
17075 Date: Thu Oct 19 11:33:52 2006 -0500
17077 * Fix a bunch of compiler warnings for gcc 4.0
17079 Signed-off-by: Matthew McClintock <msm@freescale.com>
17081 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
17082 Author: Stefan Roese <sr@denx.de>
17083 Date: Tue Oct 17 06:14:31 2006 +0200
17085 Add monitor functions for indirect access to PPC440 DCR's
17086 Patch by Leonid Baryudin, 12 Oct 2006
17088 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
17089 Author: Jon Loeliger <jdl@freescale.com>
17090 Date: Fri Oct 13 16:47:53 2006 -0500
17092 Fixed leading whitespace issues.
17093 Removed spurious LAWAR thing.
17095 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17097 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
17098 Author: Jon Loeliger <jdl@freescale.com>
17099 Date: Thu Oct 12 10:42:36 2006 -0500
17101 Remove unneeded include files and local variable.
17103 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17105 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
17106 Author: Grant Likely <grant.likely@secretlab.ca>
17107 Date: Tue Oct 10 00:23:32 2006 -0600
17109 Fix possible uninitialized variable compiler warning.
17111 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
17112 do_bootm_linux() may be uninitialized. There is no possibility in the
17113 current code that len will get used uninitialized, but this fix follows
17114 the existing convention of setting both len and data to zero at the same
17117 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17119 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
17120 Author: Matthew McClintock <msm@freescale.com>
17121 Date: Wed Oct 11 15:13:01 2006 -0500
17123 * Fix a bunch of compiler warnings for gcc 4.0
17125 Signed-off-by: Matthew McClintock <msm@freescale.com>
17127 commit bf651baa365e5447246aad6a633ccd667cf24a39
17128 Author: Jon Loeliger <jdl@freescale.com>
17129 Date: Wed Oct 11 10:10:43 2006 -0500
17131 Move "ar" flags to config.mk to allow for silent "make -s"
17133 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
17134 Author: Jon Loeliger <jdl@freescale.com>
17135 Date: Tue Oct 10 17:19:03 2006 -0500
17137 Coding style changes to remove local varible blocks
17138 and reformat a bit nicer.
17140 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
17141 Author: Jon Loeliger <jdl@freescale.com>
17142 Date: Tue Oct 10 17:16:04 2006 -0500
17144 Fix whitespace issues.
17146 commit 7b382b7125f2397cce63253df62f183e3dfa2770
17147 Author: Jon Loeliger <jdl@freescale.com>
17148 Date: Tue Oct 10 17:14:45 2006 -0500
17150 Fix whitespace issues.
17152 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
17153 Author: Jon Loeliger <jdl@freescale.com>
17154 Date: Tue Oct 10 17:06:53 2006 -0500
17156 Fix whitespace issues.
17158 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
17159 Author: Jon Loeliger <jdl@freescale.com>
17160 Date: Tue Oct 10 17:03:43 2006 -0500
17162 Ran lindent and cleaned up whitespace issues.
17163 Format for 80-columns too.
17165 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
17166 Author: Jon Loeliger <jdl@freescale.com>
17167 Date: Tue Oct 10 17:02:22 2006 -0500
17169 Fix whitespace and 80-col issues.
17171 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
17172 Author: Stefan Roese <sr@denx.de>
17173 Date: Sat Oct 7 11:36:51 2006 +0200
17175 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
17176 Patch by Stefan Roese, 07 Oct 2006
17178 commit 5bc528fa4da751d472397b308137238a6465afd2
17179 Author: Stefan Roese <sr@denx.de>
17180 Date: Sat Oct 7 11:35:25 2006 +0200
17182 Update ALPR code (NAND support working now)
17183 Patch by Stefan Roese, 07 Oct 2006
17185 commit 77d5034847d328753b80c46b83f960a14a26f40e
17186 Author: Stefan Roese <sr@denx.de>
17187 Date: Sat Oct 7 11:33:03 2006 +0200
17189 Remove compile warnings in fpga code
17190 Patch by Stefan Roese, 07 Oct 2006
17192 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
17193 Author: Stefan Roese <sr@denx.de>
17194 Date: Sat Oct 7 11:30:52 2006 +0200
17196 Add CONFIG_BOARD_RESET to configure board specific reset function
17197 Patch by Stefan Roese, 07 Oct 2006
17199 commit f55df18187e7a45cb73fec4370d12135e6691ae1
17200 Author: John Traill <john.traill@freescale.com>
17201 Date: Fri Sep 29 08:23:12 2006 +0100
17203 Fix missing tCycle/modfreq calculation.
17205 Signed-off-by: John Traill <john.traill@freescale.com>
17207 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
17208 Author: Andy Fleming <afleming@freescale.com>
17209 Date: Wed Sep 13 10:33:35 2006 -0500
17211 Updated config headers to add default FDT-based booting
17213 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
17214 Author: Andy Fleming <afleming@freescale.com>
17215 Date: Wed Sep 13 10:34:18 2006 -0500
17217 Add support for eTSEC 3 & 4 on 8548 CDS
17219 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
17220 This will only work on rev 1.3 boards (but doesn't break older boards)
17221 * Cleaned up some comments to reflect the expanded role of tsec
17224 commit 084d648b109c8984f83674043c1a7fa3885ef801
17225 Author: Andy Fleming <afleming@freescale.com>
17226 Date: Wed Sep 13 10:33:56 2006 -0500
17228 Added code to support 2.6.18 PCI changes in u-boot
17230 * Added code to swizzle the IRQ map for the PCI
17232 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
17233 Author: Jon Loeliger <jdl@freescale.com>
17234 Date: Tue Sep 19 09:34:10 2006 -0500
17236 Modified makefile for new build mechanism.
17238 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17240 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
17241 Author: Jon Loeliger <jdl@freescale.com>
17242 Date: Thu Sep 14 08:40:36 2006 -0500
17244 Handle 86xx SVR values according to the new Reference Manual.
17245 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
17246 by the byte in bits 16-23 instead.
17247 Thanks to Jason Jin for noticing.
17249 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17251 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
17252 Author: Zhang Wei <wei.zhang@freescale.com>
17253 Date: Mon Aug 28 14:25:31 2006 +0800
17255 Fixed an OF-tree off-by-one bug when adding a new property name.
17256 This bug will cause the kernel booting to pause a long time.
17258 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17259 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
17261 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
17262 Author: Jon Loeliger <jdl@freescale.com>
17263 Date: Tue Aug 29 11:05:09 2006 -0500
17265 Remove trailing empty lines.
17267 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
17268 Author: Jon Loeliger <jdl@freescale.com>
17269 Date: Tue Aug 29 09:48:49 2006 -0500
17271 Remove bogus msync and use volatile asm.
17273 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
17274 Author: Jon Loeliger <jdl@freescale.com>
17275 Date: Tue Aug 29 08:17:14 2006 -0500
17277 Add myself as maintainer for MPC8641HPCN.
17279 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
17280 Author: Zhang Wei <wei.zhang@freescale.com>
17281 Date: Mon Aug 28 14:25:31 2006 +0800
17283 Fixed an OF-tree off-by-one bug when adding a new property name.
17284 This bug will cause the kernel booting to pause a long time.
17286 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17288 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
17289 Author: Haiying Wang <haiying.wang@freescale.com>
17290 Date: Fri Aug 25 14:38:34 2006 -0400
17292 Change ramdiskaddr and dtbaddr
17293 Remove PEX fluff commands.
17295 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17296 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17298 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
17299 Author: Matthew McClintock <msm@freescale.com>
17300 Date: Wed Aug 23 13:32:45 2006 -0500
17302 * Another small fix for booting with disable_of
17304 Signed-off-by: Matthew McClintock <msm@freescale.com>
17306 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
17307 Author: Jon Loeliger <jdl@freescale.com>
17308 Date: Wed Aug 23 11:04:43 2006 -0500
17310 Cleanup and lindent new AHCI driver.
17312 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
17313 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
17314 Date: Wed Aug 23 19:15:12 2006 +0800
17316 Add AHCI define and sata support for MPC8641HPCN board.
17318 Signed-off-by:Jason Jin<jason.jin@freescale.com>
17320 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
17321 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
17322 Date: Wed Aug 23 19:10:44 2006 +0800
17324 Add AHCI support to u-boot
17326 Add AHCI support in u-boot, enable the sata disk controllers which
17327 following the AHCI protocol.
17329 Signed-off-by:Jason Jin<jason.jin@freescale.com>
17331 commit d8ea2acf5f137cae99417df4f573d036ee384668
17332 Author: Zhang Wei <wei.zhang@freescale.com>
17333 Date: Wed Aug 23 17:54:32 2006 +0800
17335 Add dtb boot-up parameter to default boot commands.
17337 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17339 commit b93775c2036b99baa390ea425c4771895bbc63c4
17340 Author: Jon Loeliger <jdl@freescale.com>
17341 Date: Tue Aug 22 18:26:08 2006 -0500
17343 Cleanup even more poorly introduced whitespace.
17345 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
17346 Author: Jon Loeliger <jdl@freescale.com>
17347 Date: Tue Aug 22 18:07:00 2006 -0500
17349 Cleanup more poorly introduced whitespace.
17351 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
17352 Author: Jon Loeliger <jdl@freescale.com>
17353 Date: Tue Aug 22 17:54:05 2006 -0500
17355 Cleanup poorly introduced whitespace.
17357 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
17358 Author: Jon Loeliger <jdl@freescale.com>
17359 Date: Tue Aug 22 12:25:27 2006 -0500
17361 General indent and whitespace cleanups.
17363 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
17364 Author: Jon Loeliger <jdl@freescale.com>
17365 Date: Tue Aug 22 12:06:18 2006 -0500
17367 General indent and whitespace cleanups.
17369 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
17370 Author: Jon Loeliger <jdl@freescale.com>
17371 Date: Tue Aug 22 10:42:21 2006 -0500
17373 Cleanup compiler warnings.
17375 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
17376 Author: Matthew McClintock <msm@freescale.com>
17377 Date: Tue Aug 22 09:31:59 2006 -0500
17379 Fix disable_of booting
17381 Signed-off-by: Matthew McClintock <msm@freescale.com>
17383 commit 87a449c8ac396420cb24260f717ea9e6faa82047
17384 Author: Matthew McClintock <msm@freescale.com>
17385 Date: Tue Aug 22 09:23:55 2006 -0500
17387 Support for FDT in uImage format, error when using FDT from flash
17389 Signed-off-by: Matthew McClintock <msm@freescale.com>
17391 commit 75c299c38369d01addd5e054b8a16217b70f4a86
17392 Author: Haiying Wang <haiying.wang@freescale.com>
17393 Date: Tue Aug 15 15:12:55 2006 -0400
17395 Unlock cache before kernel starts up for MPC86xx
17397 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
17398 Author: Haiying Wang <haiying.wang@freescale.com>
17399 Date: Tue Aug 15 15:13:15 2006 -0400
17401 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
17403 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
17404 Author: Haiying Wang <haiying.wang@freescale.com>
17405 Date: Tue Aug 15 15:12:55 2006 -0400
17407 Unlock cache before kernel starts up for MPC86xx
17409 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
17410 Author: Haiying Wang <haiying.wang@freescale.com>
17411 Date: Tue Aug 15 15:13:15 2006 -0400
17413 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
17415 commit 86c8e17f25e972a7e272950a0735fad84e082b88
17416 Author: Matthew McClintock <msm@freescale.com>
17417 Date: Wed Aug 16 13:59:47 2006 -0500
17419 * Fix disable_of booting
17421 Signed-off-by: Matthew McClintock <msm@freescale.com>
17423 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
17424 Author: Matthew McClintock <msm@freescale.com>
17425 Date: Wed Aug 16 10:54:09 2006 -0500
17427 * Support for FDT in uImage format, error when using FDT from flash
17429 Signed-off-by: Matthew McClintock <msm@freescale.com>
17431 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
17432 Author: Stefan Roese <sr@denx.de>
17433 Date: Tue Aug 15 14:22:35 2006 +0200
17435 Add initial support for the ALPR board from Prodrive
17436 NAND needs some additional testing
17437 Patch by Heiko Schocher, 15 Aug 2006
17439 commit f0ff4692ff3372dec55074a8eb444943ab095abb
17440 Author: Stefan Roese <sr@denx.de>
17441 Date: Tue Aug 15 14:15:51 2006 +0200
17443 Add FPGA Altera Cyclone 2 support
17444 Patch by Heiko Schocher, 15 Aug 2006
17446 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
17447 Author: Jon Loeliger <jdl@freescale.com>
17448 Date: Mon Aug 14 15:33:38 2006 -0500
17450 Fix BAT0 to actually be cacheable, non-guarded as documented.
17452 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17454 commit 40bc83559db5745681909fd7382ae509567e116d
17455 Author: Jon Loeliger <jdl@freescale.com>
17456 Date: Wed Aug 9 15:32:16 2006 -0500
17458 Removed MPC8641HPCN DTS source file from build.
17459 It is no longer linked into U-Boot; its sources are
17460 now located in the kernel tree.
17462 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17464 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
17465 Author: Matthew McClintock <msm@freescale.com>
17466 Date: Wed Jun 28 10:47:03 2006 -0500
17468 * Switched default PCI speed for 8540 ADS back to 33MHz
17470 * Added comments and a printf to warn that PCI-X won't
17472 Patch by Andy Fleming 17-Mar-2006
17474 Signed-off-by: Andy Fleming <afleming@freescale.com>
17476 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
17477 Author: Matthew McClintock <msm@freescale.com>
17478 Date: Wed Jun 28 10:46:35 2006 -0500
17480 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
17482 Signed-off-by: Andy Fleming <afleming@freescale.com>
17484 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
17485 Author: Matthew McClintock <msm@freescale.com>
17486 Date: Wed Jun 28 10:46:13 2006 -0500
17488 * Added VIA configuration table
17490 * Added support for PCI2 on CDS
17491 Patch by Andy Fleming 17-Mar-2006
17493 Signed-off-by: Andy Fleming <afleming@freescale.com>
17495 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
17496 Author: Matthew McClintock <msm@freescale.com>
17497 Date: Wed Jun 28 10:45:41 2006 -0500
17499 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
17501 Signed-off-by: Andy Fleming <afleming@freescale.com>
17503 commit 97074ed9655309b64231bc2cee69fe85399f8055
17504 Author: Matthew McClintock <msm@freescale.com>
17505 Date: Wed Jun 28 10:45:17 2006 -0500
17507 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
17509 Signed-off-by: Andy Fleming <afleming@freescale.com>
17511 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
17512 Author: Matthew McClintock <msm@freescale.com>
17513 Date: Wed Jun 28 10:44:49 2006 -0500
17515 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
17517 Signed-off-by: Andy Fleming <afleming@freescale.com>
17519 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
17520 Author: Matthew McClintock <msm@freescale.com>
17521 Date: Wed Jun 28 10:44:23 2006 -0500
17523 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
17525 Signed-off-by: Andy Fleming <afleming@freescale.com>
17527 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
17528 Author: Matthew McClintock <msm@freescale.com>
17529 Date: Wed Jun 28 10:43:36 2006 -0500
17531 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
17533 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17535 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
17536 Author: Matthew McClintock <msm@freescale.com>
17537 Date: Wed Jun 28 10:43:00 2006 -0500
17539 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
17541 commit 5498d90312aad9f6bdbf047986027c35b03cd163
17542 Author: Matthew McClintock <msm@freescale.com>
17543 Date: Wed Jun 28 10:42:24 2006 -0500
17545 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
17547 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
17548 Author: Matthew McClintock <msm@freescale.com>
17549 Date: Wed Jun 28 10:41:37 2006 -0500
17551 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
17553 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
17554 Author: John Traill <john.traill@freescale.com>
17555 Date: Wed Aug 9 14:33:50 2006 +0100
17557 Add Rapidio support for the MPC8641HPCN
17559 Signed-off-by: John Traill <john.traill@freescale.com>
17561 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
17562 Author: John Traill <john.traill@freescale.com>
17563 Date: Tue Aug 8 11:32:43 2006 +0100
17565 Fix caslat calculation
17567 Signed-off-by: John Traill <john.traill@freescale.com>
17569 commit 709d3073e74153278e7904a70819bbef7df50e1a
17570 Author: Jon Loeliger <jdl@freescale.com>
17571 Date: Thu Aug 3 16:17:56 2006 -0500
17573 Convert to mac-address in ethernet nodes.
17575 commit 71748af833ca1017edf1415be376366ff2937d17
17576 Author: Haiying Wang <haiying.wang@freescale.com>
17577 Date: Fri Jul 28 12:41:35 2006 -0400
17579 Correct the irq value of DUART2
17581 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
17582 Author: Haiying Wang <haiying.wang@freescale.com>
17583 Date: Fri Jul 28 12:41:41 2006 -0400
17585 Change the space size of PEX IO in README
17587 commit 239db37c94f7a92941c4465feceb867c609241c5
17588 Author: Haiying Wang <haiying.wang@freescale.com>
17589 Date: Fri Jul 28 12:41:18 2006 -0400
17591 Move get_board_sys_clk to board directory
17593 commit 492900b985439fbce1a118afde1e35def870db03
17594 Author: John Traill <john.traill@freescale.com>
17595 Date: Fri Jul 28 09:03:54 2006 +0100
17597 Fix 8641HPCN pollution
17599 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
17600 Author: John Traill <john.traill@freescale.com>
17601 Date: Fri Jul 28 08:16:06 2006 +0100
17603 Fix 8641HPCN timebase
17605 commit c86360b830f1eecd7a72208575dde4f57879faea
17606 Author: Zhang Wei <wei.zhang@freescale.com>
17607 Date: Fri Jul 28 00:01:34 2006 +0800
17609 Fixed OF device tree of mpc86xxhpcn board.
17611 The changes works in with kernel irq mapping rework.
17613 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17615 commit bea3f28d285942bf3f7ab339ce85178ded544225
17616 Author: Haiying Wang <haiying.wang@freescale.com>
17617 Date: Wed Jul 12 10:48:05 2006 -0400
17619 Add support for reading and writing mac addresses to or from ID EEPROM.
17621 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
17622 With attached patch, we can use command "mac/mac read/mac save/"
17623 to read and write EEPROM under u-boot prompt.
17625 U-boot will calculate the checksum of EEPROM while bootup,
17626 if it is right, then u-boot will check whether the mac address
17627 of eTSEC0/1/2/3 is availalbe (non-zero).
17629 If there is mac address availabe in EEPROM, u-boot will use it,
17630 otherewise, u-boot will use the mac address defined in
17631 MPC8641HPCN.h. This matches the requirement to set unique mac address
17632 for each TSEC port.
17634 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17635 Signed-off-by: York Sun <yorksun@freescale.com>
17637 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
17638 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
17639 Date: Thu Jul 13 10:35:10 2006 -0500
17641 Fixed initrd issue by define big RAM
17643 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
17645 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
17646 Author: Jason Jin <Jason.jin@freescale.com>
17647 Date: Fri Jul 7 10:01:45 2006 -0500
17649 We made a u-boot patch to fix the hang up issue
17650 when booting filesystem from ramdisk.
17652 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
17654 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
17655 Author: Matthew McClintock <msm@freescale.com>
17656 Date: Wed Jun 28 10:47:03 2006 -0500
17658 * Switched default PCI speed for 8540 ADS back to 33MHz
17659 * Added comments and a printf to warn that PCI-X won't
17661 Patch by Andy Fleming 17-Mar-2006
17663 Signed-off-by: Andy Fleming <afleming@freescale.com>
17665 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
17666 Author: Matthew McClintock <msm@freescale.com>
17667 Date: Wed Jun 28 10:46:35 2006 -0500
17669 * Fixed a bug where 8555 PCI code used the old variable and
17671 Patch by Andy Fleming 17-Mar-2006
17673 Signed-off-by: Andy Fleming <afleming@freescale.com>
17675 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
17676 Author: Matthew McClintock <msm@freescale.com>
17677 Date: Wed Jun 28 10:46:13 2006 -0500
17679 * Added VIA configuration table
17680 * Added support for PCI2 on CDS
17681 Patch by Andy Fleming 17-Mar-2006
17683 Signed-off-by: Andy Fleming <afleming@freescale.com>
17685 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
17686 Author: Matthew McClintock <msm@freescale.com>
17687 Date: Wed Jun 28 10:45:41 2006 -0500
17689 * Fixed PCI memory definitions
17690 Patch by Andy Fleming 17-Mar-2006
17692 Signed-off-by: Andy Fleming <afleming@freescale.com>
17694 commit 087454609e47295443af793a282cddcd91a5f49c
17695 Author: Matthew McClintock <msm@freescale.com>
17696 Date: Wed Jun 28 10:45:17 2006 -0500
17698 * Added support for initializing second PCI bus on 85xx
17699 Patch by Andy Fleming 17-Mar-2006
17701 Signed-off-by: Andy Fleming <afleming@freescale.com>
17703 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
17704 Author: Matthew McClintock <msm@freescale.com>
17705 Date: Wed Jun 28 10:44:49 2006 -0500
17707 * Added PCI-X #defines for PCI-X initialization
17708 Patch by Andy Fleming on 17-Mar-2006
17710 Signed-off-by: Andy Fleming <afleming@freescale.com>
17712 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
17713 Author: Matthew McClintock <msm@freescale.com>
17714 Date: Wed Jun 28 10:44:23 2006 -0500
17716 * Made sure the code which disables prefetch for PCI devices
17717 sets the size of the prefetch region to 0
17718 Patch by Andy Fleming on 17-Mar-2006
17720 Signed-off-by: Andy Fleming <afleming@freescale.com>
17722 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
17723 Author: Matthew McClintock <msm@freescale.com>
17724 Date: Wed Jun 28 10:43:36 2006 -0500
17726 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
17727 Patch by Jon Loeliger 17-Jan-2006
17729 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17731 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
17732 Author: Matthew McClintock <msm@freescale.com>
17733 Date: Wed Jun 28 10:43:00 2006 -0500
17735 * Removed the oftree.dts for stxxtx in light of the changes
17736 to the flat device tree handling code
17737 Patch by Matthew McClintock 26-June-2006
17739 commit 1b380ec225665e73959677f3893dc658c5925e05
17740 Author: Matthew McClintock <msm@freescale.com>
17741 Date: Wed Jun 28 10:42:24 2006 -0500
17743 * Patch to modify ft_build.c to update flat device trees in place
17744 Patch by Matthew McClintock 26-June-2006
17746 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
17747 Author: Matthew McClintock <msm@freescale.com>
17748 Date: Wed Jun 28 10:41:37 2006 -0500
17750 * Modify bootm command to support booting with flat device trees
17751 Patch by Matthew McClintock 26-June-2006
17753 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
17754 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
17755 Date: Wed Jun 28 08:43:56 2006 -0500
17757 Change Id to symbolic name for RTL8139
17759 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17761 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
17762 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17763 Date: Tue Jun 27 18:12:10 2006 +0800
17765 Fix RTL8139 in big endian
17767 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
17768 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
17770 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
17771 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17772 Date: Tue Jun 27 18:12:23 2006 +0800
17774 Fix Tsec bug when no link
17776 When tftp a non-exist file from the tftp server, u-boot will check
17777 the link of all eth port. The original file will return wrong link
17778 state on the no link ports.
17780 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
17782 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
17783 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17784 Date: Tue Jun 27 18:12:02 2006 +0800
17786 Fix bug for io_bar size during pci scan
17788 During the pci scan process, Some devices return bar_reponse with the
17789 highest bytes 0, such as the pci bridge in uli1575 return bar_response
17790 with 0xffffff, So the bar_size should be manually set under 64K.
17792 Signed-off-by: Jason Jin <jason.jin@freescale.com>
17794 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
17795 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
17796 Date: Tue Jun 27 18:11:54 2006 +0800
17798 Enable PCIE1 for MPC8641HPCN board
17800 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17802 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
17803 Author: Wolfgang Denk <wd@pollux.denx.de>
17804 Date: Mon Jun 26 11:06:00 2006 +0200
17808 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
17809 Author: Jon Loeliger <jdl@freescale.com>
17810 Date: Thu Jun 22 08:51:46 2006 -0500
17812 Fix bug in 8641hpcn reset command with no args.
17814 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17815 Acked-by: Jon Loeliger <jdl@freescale.com>
17817 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
17818 Author: Zhang Wei <wei.zhang@freescale.com>
17819 Date: Tue Jun 20 17:47:15 2006 +0800
17821 Reworked IRQ mapping in OF-tree.
17823 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
17824 Author: Jon Loeliger <jdl@freescale.com>
17825 Date: Thu Jun 15 21:33:37 2006 -0500
17827 Do not enable address translation on secondary CPUs.
17828 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
17830 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17832 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
17833 Author: Wolfgang Denk <wd@pollux.denx.de>
17834 Date: Wed Jun 14 18:14:56 2006 +0200
17838 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
17839 Author: Wolfgang Denk <wd@pollux.denx.de>
17840 Date: Wed Jun 14 17:45:53 2006 +0200
17842 Various USB related patches
17843 - Add support for mpc8xx USB device.
17844 - Add support for Common Device Class - Abstract Control Model USB console.
17845 - Add support for flow control in USB slave devices.
17846 - Add support for switching between gserial and cdc_acm using environment.
17847 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
17848 - Update usbcore slightly to ease host enumeration.
17849 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
17850 - Add AdderUSB_config as a defconfig to enable usage of the USB console
17851 by default with the Adder87x U-Boot port.
17852 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
17854 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
17855 Author: Jon Loeliger <jdl@jdl.com>
17856 Date: Wed Jun 7 10:53:55 2006 -0500
17858 Fix a get_board_sys_clk() use-before-def warning.
17860 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17862 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
17863 Author: Jon Loeliger <jdl@jdl.com>
17864 Date: Wed Jun 7 10:52:49 2006 -0500
17866 Allow DTC path to be passed in.
17868 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17870 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
17871 Author: Haiying Wang <haiying.wang@freescale.com>
17872 Date: Tue Jun 6 16:54:29 2006 -0400
17874 Modify the IRQ of DUART2
17876 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
17877 Author: Jon Loeliger <jdl@jdl.com>
17878 Date: Wed May 31 13:55:35 2006 -0500
17882 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17884 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
17885 Author: Jon Loeliger <jdl@jdl.com>
17886 Date: Wed May 31 12:44:44 2006 -0500
17888 White space cleanup.
17889 Some 80-column cleanups.
17890 Convert printf() to puts() where possible.
17891 Use #include "spd_sdram.h" as needed.
17892 Enhanced reset command usage message a bit.
17894 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17896 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
17897 Author: Jon Loeliger <jdl@jdl.com>
17898 Date: Wed May 31 11:39:34 2006 -0500
17900 Removed unneeded local_bus_init() from 8641HPCN board.
17902 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17904 commit 4d3d729c16c392d2982d3266b659d333c927697d
17905 Author: Jon Loeliger <jdl@jdl.com>
17906 Date: Wed May 31 11:24:28 2006 -0500
17908 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
17910 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17912 commit b2a941de060350ad15878d8219825f4950e9bb8e
17913 Author: Jon Loeliger <jdl@jdl.com>
17914 Date: Wed May 31 10:07:28 2006 -0500
17916 Remove dead debug code.
17918 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17920 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
17921 Author: Jon Loeliger <jdl@freescale.com>
17922 Date: Tue May 30 17:47:00 2006 -0500
17924 Move mpc86xx PIXIS code to board directory
17926 First cut at moving the PIXIS platform code out of
17927 the 86xx cpu directory and into board/mpc8641hpcn
17930 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17932 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
17933 Author: Markus Klotzbuecher <mk@denx.de>
17934 Date: Tue May 30 16:56:14 2006 +0200
17936 Support generic OHCI support for the s3c24x0 cpu.
17938 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
17939 Author: Haiying Wang <Haiying.Wang@freescale.com>
17940 Date: Tue May 30 09:10:32 2006 -0500
17942 Improve "reset" command's interaction with watchdog.
17944 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
17945 "reset altbank wd" will reset another bank WITH watch dog enabled
17946 "diswd" will disable watch dog after u-boot boots up successfully
17948 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17950 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
17951 Author: Haiying Wang <Haiying.Wang@freescale.com>
17952 Date: Tue May 30 08:51:19 2006 -0500
17954 Fix two SDRAM setup bugs.
17957 Enable 1T/2T based on number of DIMMs present.
17959 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17961 commit d11fec5015334deb2010e36ce00bb118cc5429a5
17962 Author: Haiying Wang <Haiying.Wang@freescale.com>
17963 Date: Fri May 26 10:24:48 2006 -0500
17965 Add first draft of the MPC8641HPCN doc/README.
17967 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17969 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
17970 Author: Haiying Wang <Haiying.Wang@freescale.com>
17971 Date: Fri May 26 10:13:04 2006 -0500
17973 Added pci@8000 block.
17974 Updated ethernet interrupt mappings (moved up 48).
17975 Cleaned up a few comments.
17977 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17979 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
17980 Author: Haiying Wang <Haiying.Wang@freescale.com>
17981 Date: Fri May 26 10:01:16 2006 -0500
17983 Allow args on reset command.
17985 Signed-off-by: Jon Loeliger <jdl@jdl.com>
17987 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
17988 Author: Markus Klotzbuecher <mk@denx.de>
17989 Date: Tue May 23 13:38:35 2006 +0200
17991 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
17992 fixes to the latter.
17994 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
17995 Author: Markus Klotzbuecher <mk@denx.de>
17996 Date: Tue May 23 10:33:11 2006 +0200
17998 More cleanup for the delta board and the generic usb_ohci driver. Added
17999 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
18000 initialization and cleanup hooks respectively.
18002 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
18003 Author: Markus Klotzbuecher <mk@denx.de>
18004 Date: Mon May 22 16:33:54 2006 +0200
18006 This patch adds USB storage support for the delta board. This is the first
18007 board to make use of a generic OHCI driver, that calls hooks for board
18008 dependant initialization.
18010 commit 14e37081ff3cac7ebe6e93836523429853b6b292
18011 Author: Jon Loeliger <jdl@jdl.com>
18012 Date: Fri May 19 13:28:39 2006 -0500
18014 Change arbitration to round-robin for SMP linux.
18016 commit 9a655876e5995be80f49054e2509500e871e4d3a
18017 Author: Jon Loeliger <jdl@jdl.com>
18018 Date: Fri May 19 13:26:34 2006 -0500
18020 Enable dual DDR controllers and interleaving.
18022 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
18023 Author: Jon Loeliger <jdl@jdl.com>
18024 Date: Fri May 19 13:22:44 2006 -0500
18026 Update 86xx address map and LAWBARs.
18028 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
18029 Author: Jon Loeliger <jdl@jdl.com>
18030 Date: Fri May 19 13:14:15 2006 -0500
18032 Remove L2 Cache invalidate polling.
18034 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
18035 Author: Jon Loeliger <jdl@jdl.com>
18036 Date: Fri May 19 12:33:09 2006 -0500
18038 Enable 2nd CPU and I2C.
18040 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
18041 Author: Jon Loeliger <jdl@freescale.com>
18042 Date: Mon May 15 07:26:56 2006 -0500
18044 Update interrupt mapping.
18046 commit 6cfea33477b04b63ed47386ed1629529484c33ba
18047 Author: Haiying Wang <Haiying.Wang@freescale.com>
18048 Date: Wed May 10 09:38:06 2006 -0500
18050 Remove unneeded INIT_RAM_LOCK cache twiddling.
18051 Correctly tracks r29 as global data pointer now.
18053 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
18055 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
18056 Author: Jon Loeliger <jdl@freescale.com>
18057 Date: Wed May 10 09:33:07 2006 -0500
18059 Remove unnecessary flash.c file.
18061 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
18062 Author: Jon Loeliger <jdl@freescale.com>
18063 Date: Tue May 9 08:23:49 2006 -0500
18065 Get MPC8641HPCN flash images working.
18067 Enable the CFI driver.
18068 Remove bogus LAWBAR7 cruft.
18069 Use correct TEXT_BASE, Fixup load script.
18070 Enable SPD EEPROM during DDR setup.
18071 Use generic RFC 1918 IP addresses by default.
18073 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
18074 Author: Jon Loeliger <jdl@freescale.com>
18075 Date: Thu Apr 27 10:15:16 2006 -0500
18077 Cleanup whitespaces and style issues.
18078 Removed //-style comments.
18079 Use 80-column lines.
18080 Remove trailing whitespace.
18081 Remove dead code and debug cruft.
18083 commit a2320a6bf8113a09544c42d160d10ac69d049a03
18084 Author: Jon Loeliger <jdl@freescale.com>
18085 Date: Thu Apr 27 08:22:39 2006 -0500
18087 Revert bad PCI prefetch limit change.
18089 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
18090 Author: Jon Loeliger <jdl@freescale.com>
18091 Date: Wed Apr 26 17:58:56 2006 -0500
18093 Initial support for MPC8641 HPCN board.