1 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
2 Author: Vlad Lungu <vlad@comsys.ro>
3 Date: Thu Oct 4 20:47:10 2007 +0300
7 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
8 to do anything in eth_stop() if eth_init() was not called.
9 Simplified RX path in order to avoid timeouts on really really
10 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
11 clever enough to cope with 1 packet per eth_rx().
13 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
15 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
16 Author: Detlev Zundel <dzu@denx.de>
17 Date: Fri Oct 19 16:47:26 2007 +0200
21 Signed-off-by: Detlev Zundel <dzu@denx.de>
23 commit 281df457c1aa50d2752165d0c5c3282d4027b974
24 Author: Tony Li <tony.li@freescale.com>
25 Date: Thu Oct 18 17:47:19 2007 +0800
27 mpc83xx: Add configure entry for MPC83xx ATM support
29 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
32 Signed-off-by: Tony Li <tony.li@freescale.com>
33 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35 commit d2646554f529a9577515eceb0ec5eceee18244ba
36 Author: Tony Li <tony.li@freescale.com>
37 Date: Thu Oct 18 17:44:38 2007 +0800
39 mpc83xx: pq-mds-pib.c typo error
41 Correct to val8 from val.
43 Signed-off-by: Tony Li <tony.li@freescale.com>
44 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
46 commit 3e11ae80fec1ee12194940955431186abf6009c2
47 Author: Stefan Roese <sr@denx.de>
48 Date: Wed Oct 17 15:40:19 2007 +0200
50 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
52 Signed-off-by: Stefan Roese <sr@denx.de>
54 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
55 Author: runet@innovsys.com <runet@innovsys.com>
56 Date: Tue Oct 16 14:50:40 2007 -0500
58 Make MPC8266ADS board compile again.
60 Signed-off-by: Runet Torgersen <runet@innovsys.com>
62 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
63 Author: Jon Loeliger <jdl@freescale.com>
64 Date: Mon Aug 27 12:41:03 2007 -0500
66 86xx: Allow for fewer DDR slots per memory controller.
68 As a direct correlation exists between DDR DIMM slots
69 and SPD EEPROM addresses used to configure them, use
70 the individually defined SPD_EEPROM_ADDRESS* values to
71 determine if a DDR DIMM slot should have its SPD
72 configuration read or not.
74 Effectively, this now allows for 1 or 2 DIMM slots
75 per memory controller.
77 Signed-off-by: Jon Loeliger <jdl@freescale.com>
79 commit 4d4a945e189a2f384c66432316da2788a0ac1607
80 Author: Rodolfo Giometti <giometti@enneenne.com>
81 Date: Mon Oct 15 11:59:17 2007 +0200
83 PXA USB OHCI: "usb stop" implementation.
85 Some USB keys need to be switched off before loading the kernel
86 otherwise they can remain in an undefined status which prevents them
87 to be correctly recognized by the kernel.
89 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
91 commit e2e93442e558cf1500e92861f99713b2f045ea22
92 Author: Stefan Roese <sr@denx.de>
93 Date: Mon Oct 15 11:39:00 2007 +0200
95 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
97 The I2C bootstrap values that can be setup via the "bootstrap" command,
98 were setup incorrect regarding the generation of the internal sync PCI
99 clock. The values for PLB clock == 133MHz were slighly incorrect and the
100 values for PLB clock == 166MHz were totally incorrect. This could
101 lead to a hangup upon booting while PCI configuration scan.
103 This patch fixes this issue and configures valid PCI divisor values
104 for the sync PCI clock, with respect to the provided external async
107 Here the values of the formula in the chapter 14.2 "PCI clocking"
108 from the 440EPx users manual:
110 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
112 33MHz async PCI frequency:
114 => 32 <= 44.3 <= 65 (div = 3)
117 => 32 <= 55.3 <= 65 (div = 3)
119 66MHz async PCI frequency:
121 => 65 <= 66.5 <= 132 (div = 2)
124 => 65 <= 83 <= 132 (div = 2)
126 Signed-off-by: Stefan Roese <sr@denx.de>
128 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
129 Author: Stefan Roese <sr@denx.de>
130 Date: Mon Oct 15 11:29:33 2007 +0200
132 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
134 The BCSR status bit for the 66MHz PCI operation was correctly
135 addressed (MSB/LSB problem). Now the correct currently setup
136 PCI frequency is displayed upon bootup.
138 This patch also fixes this problem on Rainier & Yellowstone, since these
139 boards use the same souce code as Sequoia & Yosemite do.
141 Signed-off-by: Stefan Roese <sr@denx.de>
143 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
144 Author: Martin Krause <martin.krause@tqs.de>
145 Date: Wed Sep 26 17:55:56 2007 +0200
147 TQM860M: adjust for doubled flash sector size.
149 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
152 Signed-off-by: Martin Krause <martin.krause@tqs.de>
154 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
155 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
156 Date: Wed Sep 26 17:55:54 2007 +0200
158 TQM8xx: Fix CAN timing.
160 Signed-off-by: Martin Krause <martin.krause@tqs.de>
162 commit d43e489baf02afae49077791fb22332d240d8656
163 Author: Martin Krause <martin.krause@tqs.de>
164 Date: Thu Sep 27 14:54:36 2007 +0200
166 TQM866M: fix SDRAM refresh
168 At 133 MHz the current SDRAM refresh rate is too fast
169 (measured 4 * 1.17 us).
170 CFG_MAMR_PTA changes from 39 to 97. This result
171 in a refresh rate of 4 * 7.8 us at the default clock
172 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
173 This is a compromise until a new method is found to
174 adjust the refresh rate.
176 Signed-off-by: Martin Krause <martin.krause@tqs.de>
178 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
179 Author: Martin Krause <martin.krause@tqs.de>
180 Date: Wed Sep 26 17:55:55 2007 +0200
182 TQM866M: adjust for doubled flash sector size.
184 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
187 Signed-off-by: Martin Krause <martin.krause@tqs.de>
189 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
190 Author: Michal Simek <monstr@monstr.eu>
191 Date: Sun Oct 14 16:12:29 2007 +0200
193 [FIX] XUPV2P change command handling
194 and remove code violation
196 commit 636400198228d96983c06657b17f760f5989958e
197 Author: Wolfgang Denk <wd@denx.de>
198 Date: Sun Oct 14 00:13:19 2007 +0200
200 Prepare for 1.3.0-rc3 release
202 Signed-off-by: Wolfgang Denk <wd@denx.de>
204 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
205 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
206 Date: Sat Sep 29 13:41:37 2007 +0200
208 Fix warning differ in signedness in cpu/pxa/mmc.c
210 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
212 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
213 Author: Wolfgang Denk <wd@denx.de>
214 Date: Sat Oct 13 23:51:14 2007 +0200
216 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
218 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
219 Signed-off-by: Wolfgang Denk <wd@denx.de>
221 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
222 Author: Wolfgang Denk <wd@denx.de>
223 Date: Sat Oct 13 21:15:39 2007 +0200
225 Coding Style cleanup.
227 Signed-off-by: Wolfgang Denk <wd@denx.de>
229 commit e1893815b0999410d7a327589611c7b38e95299e
230 Author: Wolfgang Denk <wd@denx.de>
231 Date: Fri Oct 12 15:49:39 2007 +0200
235 Signed-off-by: Wolfgang Denk <wd@denx.de>
237 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
238 Author: Grzegorz Bernacki <gjb@semihalf.com>
239 Date: Tue Oct 9 13:58:24 2007 +0200
241 [ads5121] EEPROM support added.
243 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
245 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
246 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
247 Date: Sat Oct 6 18:55:35 2007 +0200
249 AVR32: Initialize bi_flash* in board_init_r
251 The ATSTK1000-specific flash driver intializes bi_flashstart,
252 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
255 Initialize these in board_init_r instead so that things will still be
256 set up correctly when we switch to the CFI driver.
258 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
260 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
261 Author: Marian Balakowicz <m8@semihalf.com>
262 Date: Fri Oct 5 10:40:54 2007 +0200
264 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
266 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
268 commit 92869195ef8210758d2176230c0a36897afd50ed
269 Author: Bartlomiej Sieka <tur@semihalf.com>
270 Date: Fri Oct 5 09:46:06 2007 +0200
272 CM5200: Fix missing null-termination in hostname manipulation code
274 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
276 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
277 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
278 Date: Tue Oct 2 19:09:01 2007 +0200
282 CFG_MEMTEST_START uses weird magic involving gd, which fails to
283 compile. Use hardcoded values instead (we actually know how much RAM
286 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
288 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
289 Author: Stefan Roese <sr@denx.de>
290 Date: Tue Oct 2 11:44:46 2007 +0200
292 ppc4xx: Coding style cleanup
294 Signed-off-by: Stefan Roese <sr@denx.de>
296 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
297 Author: Stefan Roese <sr@denx.de>
298 Date: Tue Oct 2 11:44:19 2007 +0200
300 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
302 Signed-off-by: Stefan Roese <sr@denx.de>
304 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
305 Author: Grzegorz Bernacki <gjb@semihalf.com>
306 Date: Mon Oct 1 09:51:50 2007 +0200
308 Program EPLD to force full duplex mode for PHY.
310 EPLD forces modes of PHY operation. By default full duplex is turned off.
311 This fix turns it on.
313 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
315 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
316 Author: Timo Ketola <timo.ketola@exertus.fi>
317 Date: Mon Sep 24 14:50:32 2007 +0300
319 Bugfix: Use only one PTD for one endpoint
321 Original isp116x-hcd code prepared multiple PTDs for longer than 16
322 byte transfers for one endpoint. That is unnecessary because the
323 ISP116x is able to split long data from one PTD into multiple
324 transactions based on the buffer size of the endpoint. It also caused
325 serious problems if the endpoint NAKed some of the transactions. In
326 that case ISP116x wouldn't notice that the other PTDs were for the same
327 endpoint and would try the other PTDs possibly out of order. That would
328 break the whole transfer.
330 This patch makes isp116x_submit_job to use one PTD for one transfer.
332 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
333 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
335 commit 86ec86c04326c3913178a7679aa910de071da75d
336 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
337 Date: Thu Sep 27 23:27:47 2007 +0200
339 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
341 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
343 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
344 Author: Stefan Roese <sr@denx.de>
345 Date: Tue Sep 11 14:12:55 2007 +0200
347 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
349 Signed-off-by: Stefan Roese <sr@denx.de>
351 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
352 Author: Grant Likely <grant.likely@secretlab.ca>
353 Date: Tue Sep 25 15:48:05 2007 -0600
355 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
357 CFG_FPGA_XILINX is a bit value used to test against the value in
358 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
359 think that is the intention in this code.
361 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
363 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
364 Author: Michal Simek <monstr@monstr.eu>
365 Date: Mon Sep 24 00:41:30 2007 +0200
367 [FIX] change command handling and removing code violation
369 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
370 Author: Michal Simek <monstr@monstr.eu>
371 Date: Mon Sep 24 00:36:06 2007 +0200
373 [FIX] change sets of commands
374 because changing of command handling brings
377 commit cb1bc63b75a232571eb69aa2c8aa919321655845
378 Author: Michal Simek <monstr@monstr.eu>
379 Date: Mon Sep 24 00:30:42 2007 +0200
381 [FIX] Email reparation & Copyright
382 Both codes are written by myself without any
385 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
386 Author: Michal Simek <monstr@monstr.eu>
387 Date: Mon Sep 24 00:25:11 2007 +0200
389 [PATCH] Change macro name for UartLite
390 because PowerPC 405 can use UartLite as console
392 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
393 Author: Michal Simek <monstr@monstr.eu>
394 Date: Mon Sep 24 00:21:19 2007 +0200
396 [PATCH] Add support for design without interrupt controller
399 commit 0731933ec8ec45d02ba89b52df673d526873cdde
400 Author: Michal Simek <monstr@monstr.eu>
401 Date: Mon Sep 24 00:19:48 2007 +0200
403 [FIX] resolve problem with cpu without barrel shifter
405 commit db14d77995ce515b728b178b63f82babe60e3d56
406 Author: Michal Simek <monstr@monstr.eu>
407 Date: Mon Sep 24 00:18:46 2007 +0200
409 [FIX] repair email address
411 commit 481d4328618804add1f818a6c96296121cd0528e
412 Author: Michal Simek <monstr@monstr.eu>
413 Date: Mon Sep 24 00:17:42 2007 +0200
415 [FIX] repair MFSL commands
417 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
418 Author: Michal Simek <monstr@monstr.eu>
419 Date: Mon Sep 24 00:08:37 2007 +0200
421 synchronizition with mainline
423 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
424 Author: Wolfgang Denk <wd@denx.de>
425 Date: Thu Sep 20 00:04:14 2007 +0200
429 Signed-off-by: Wolfgang Denk <wd@denx.de>
431 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
432 Author: Wolfgang Denk <wd@denx.de>
433 Date: Tue Sep 18 21:36:35 2007 +0200
435 Avoid compiler warning.
437 Signed-off-by: Wolfgang Denk <wd@denx.de>
439 commit 8a783a65851bc7421ab69f442261215e21b8891a
440 Author: Grant Likely <grant.likely@secretlab.ca>
441 Date: Tue Sep 18 12:24:57 2007 -0600
443 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
445 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
446 nulls in a string differently. For example, the following statement:
447 echo "this is a string\0" > afile
448 Will produce the following with /bin/bash:
450 But with /bin/dash, will produce:
453 Bug fixed by moving the embedded null out of the makefile and into the
454 config header. Also renamed the macro to avoid usage colision with the same
455 macro used by other board ports.
457 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
459 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
460 Author: Wolfgang Denk <wd@denx.de>
461 Date: Tue Sep 18 17:40:27 2007 +0200
463 MCC200: fix build warning
465 The MCC200 board config file includes version.h for some customer-
466 specific setting, which causes warnings with "make depend"; build
467 version.h before depend.
469 Signed-off-by: Wolfgang Denk <wd@denx.de>
471 commit bd86220f58b99d6896198c385fda132f0c980915
472 Author: Peter Pearse <peter.pearse@arm.com>
473 Date: Tue Sep 18 13:07:54 2007 +0100
475 Move coloured led API to status_led.h
476 Improve indentation in drivers/at45.c
478 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
479 Author: Eirik Aanonsen <eaa@wprmedical.com>
480 Date: Tue Sep 18 08:47:20 2007 +0200
482 Update atstk1002 bootargs.
484 Updates to atstk1002 U-Boot header file:
486 * Set the bootargs for at1002 to point to the SD-card partition instead
487 * ... of the boot flash.
488 * Removing the rootfstype since that argument are not needed.
490 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
491 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
493 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
494 Author: Eirik Aanonsen <eaa@wprmedical.com>
495 Date: Wed Sep 12 13:32:37 2007 +0200
497 Add some comments to clocks in atstk1002.h
499 This patch applies some clarifying comments to how the different
500 clocks are setup according to atstk1002.h Some of the previous
501 comments where stating wrongful information.
503 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
505 commit 97213f32416ead885deafea86774e912ffd60ad0
506 Author: David Saada <David.Saada@ecitele.com>
507 Date: Mon Sep 17 17:04:47 2007 +0200
509 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
511 Signed-off-by: David Saada <david.saada@ecitele.com>
513 commit 30363e98fa470fbecea5e8bc0f1443352754f303
514 Author: Stefan Roese <sr@denx.de>
515 Date: Mon Sep 17 08:20:47 2007 +0200
517 Small whitespace cleanup of OneNAND patch
519 Signed-off-by: Stefan Roese <sr@denx.de>
521 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
522 Author: Kyungmin Park <kmpark@infradead.org>
523 Date: Mon Sep 10 17:15:14 2007 +0900
525 OneNAND support (take #2)
527 [PATCH 3/3] OneNAND support (take #2)
529 OneNAND support at U-Boot
531 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
533 commit 17aa2800457df0c06b41516f46f126712c196219
534 Author: Kyungmin Park <kmpark@infradead.org>
535 Date: Mon Sep 10 17:14:34 2007 +0900
537 OneNAND support (take #2)
539 [PATCH 2/3] OneNAND support (take #2)
541 OneNAND support at U-Boot
543 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
545 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
546 Author: Kyungmin Park <kmpark@infradead.org>
547 Date: Mon Sep 10 17:13:49 2007 +0900
549 OneNAND support (take #2)
551 [PATCH 1/3] OneNAND support (take #2)
553 OneNAND support at U-Boot
555 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
557 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
558 Author: Michal Simek <monstr@monstr.eu>
559 Date: Sun Sep 16 20:51:57 2007 +0200
561 [FIX] remove files form repository
563 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
564 Author: Wolfgang Denk <wd@denx.de>
565 Date: Sun Sep 16 17:10:04 2007 +0200
567 TQM8xx[LM]: Fix broken environment alignment.
569 With recent toolchains, the environment sectors were no longer aligned to
570 sector boundaries. The reason was a combination of two bugs:
572 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
573 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
574 this gets defined, is not included here (and cannot be included
575 without causing lots of problems).
577 Added a new #define CFG_USE_PPCENV for all boards which really
578 want to put the environment is a ".ppcenv" section.
580 2) The linker scripts just include environment.o, silently assuming
581 that the objects in that file are really in the order in which
582 they are coded in the C file, i. e. "environment" first, then
583 "redundand_environment", and "env_size" last. However, current
584 toolchains (GCC-4.x) reorder the objects, causing the environment
585 data not to start on a flash sector boundary:
589 40008000 T environment 40008000 T env_size
590 4000c000 T redundand_environment 40008004 T redundand_environment
591 40010000 T env_size 4000c004 T environment
593 Note: this patch fixes just the first part, and cures the alignment
594 problem by making sure that "env_size" gets placed correctly. However,
595 we still have a potential issue because primary and redundant
596 environment sectors are actually swapped, i. e. we have now:
598 40008000 T redundand_environment
599 4000c000 T environment
602 This shall be fixed in the next version.
604 Signed-off-by: Wolfgang Denk <wd@denx.de>
606 commit eb6da8050797c204c9d010548424186c7ce32fc1
607 Author: Wolfgang Denk <wd@denx.de>
608 Date: Sun Sep 16 02:39:35 2007 +0200
610 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
612 Signed-off-by: Wolfgang Denk <wd@denx.de>
614 commit cd2d1602c54cc6957bdef3872272a4b264893960
615 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
616 Date: Mon Sep 10 14:54:56 2007 -0400
620 Fixup for the break statement in wrong place.
622 [Patch by urwithsughosh@gmail.com]
623 Acked-by: Andy Fleming <afleming@freescale.com>
624 Signed-off-by: Wolfgang Denk <wd@denx.de>
626 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
627 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
628 Date: Tue Sep 11 17:04:00 2007 +0200
630 Fix do_div() usage in nand process output
632 Fix usage of do_div() in nand erase|read|write process output.
634 The last patch to nand_util.c introduced do_div() instead of libgcc's
635 implementation. But do_div() returns the quotient in its first
636 macro parameter and not as result.
638 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
640 commit c750d2e6692a000a82f29de7bf24e3dc21239161
641 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
642 Date: Wed Sep 12 12:36:53 2007 +0200
644 NAND: Add CFG_NAND_QUIET option
646 This config option sets the default for the progress information
647 output behavior that can also be configured through the 'quiet'
648 environment variable.
650 The legacy NAND code does not print the current progress info
651 on the console. So this option is for backward compatibility for
652 units that are in the field and where setting the quiet variable
653 is not an option. With CFG_NAND_QUIET set to '1' the console
654 progress info is turned off. This can still be overwritten
655 through the environment variable.
657 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
659 commit dcb88630290d2bcd803386dd4c2be73142994c4f
660 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
661 Date: Thu Sep 13 16:06:05 2007 -0700
663 ColdFire: fix build error becasue of bad type of mii_init()
665 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
667 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
668 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
669 Date: Thu Sep 13 16:04:05 2007 -0700
671 ColdFire: Fix build error caused by pixis.c
673 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
675 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
677 commit e21659e30660a1377c42af135a6114efe39801d9
678 Author: Sam Sparks <SSparks@twacs.com>
679 Date: Fri Sep 14 11:14:42 2007 -0600
681 Update MPC8349ITX*_config to place config.tmp in right place.
683 MPC834ITX*_config does not store config.tmp at the correct locatation,
684 causing MPC8349ITXGP to have the wrong TEXT_BASE.
686 Signed-off-by: Sam Sparks <SSparks@twacs.com>
687 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
689 commit 1218abf1b5817a39a82399b4b928b00750575bda
690 Author: Wolfgang Denk <wd@denx.de>
691 Date: Sat Sep 15 20:48:41 2007 +0200
693 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
695 Signed-off-by: Wolfgang Denk <wd@denx.de>
697 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
698 Author: Dirk Behme <dirk.behme@googlemail.com>
699 Date: Sat Sep 15 11:55:42 2007 +0200
701 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
703 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
706 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
708 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
710 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
711 Author: Michal Simek <monstr@monstr.eu>
712 Date: Sat Sep 15 00:03:35 2007 +0200
714 Synchronize with U-BOOT mainline
716 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
717 Author: Sam Sparks <SSparks@twacs.com>
718 Date: Fri Sep 14 11:14:42 2007 -0600
720 Update MPC8349ITX*_config to place config.tmp in right place.
722 MPC834ITX*_config does not store config.tmp at the correct locatation,
723 causing MPC8349ITXGP to have the wrong TEXT_BASE.
725 Signed-off-by: Sam Sparks <SSparks@twacs.com>
726 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
727 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
729 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
730 Author: Bartlomiej Sieka <tur@semihalf.com>
731 Date: Thu Sep 13 18:21:48 2007 +0200
733 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
735 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
737 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
738 Author: Bartlomiej Sieka <tur@semihalf.com>
739 Date: Thu Sep 13 16:33:59 2007 +0200
741 tqm5200: Restore customary env. variable boot commands for powerpc kernels
743 - update default definitions of kernel_addr and fdt_addr env. variables
744 - make arch/powerpc booting the default scenario
745 - update MTD partition layout to match the above
747 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
749 commit f34024d4a328e6edd906456da98d2c537155c4f7
750 Author: Wolfgang Denk <wd@denx.de>
751 Date: Wed Sep 12 00:48:57 2007 +0200
753 Fix memory corruption problem on STX GP3 SSA Board.
755 Signed-off-by: Wolfgang Denk <wd@denx.de>
757 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
758 Author: Peter Pearse <peter.pearse@arm.com>
759 Date: Tue Sep 11 15:35:01 2007 +0100
763 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
764 Author: Grzegorz Bernacki <gjb@semihalf.com>
765 Date: Tue Sep 11 15:42:11 2007 +0200
767 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
768 scan on second pci bus.
770 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
772 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
773 Author: Grzegorz Bernacki <gjb@semihalf.com>
774 Date: Tue Sep 11 12:57:52 2007 +0200
776 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
778 Bamboo has a file sdram.c which needs special treatment when building in
779 separate directory. It has to be linked to build directory otherwise it is
782 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
784 commit d45963854eff39d575124d859419bb4953ce2c87
785 Author: Michal Simek <monstr@monstr.eu>
786 Date: Tue Sep 11 00:37:04 2007 +0200
788 [FIX] Microblaze ML401 - repare FLASH handling
790 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
791 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
792 Date: Mon Sep 10 16:55:59 2007 +0100
794 Allocate CPU Architecture Code for STMicroelectronics' ST200.
796 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
797 ---------------------------------------------------
799 commit 754bac48156f8958d8f6a53a51eda88ab5758929
800 Author: Wolfgang Denk <wd@denx.de>
801 Date: Mon Sep 10 20:42:31 2007 +0200
803 Update version to match current state.
805 Signed-off-by: Wolfgang Denk <wd@denx.de>
807 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
808 Author: Grzegorz Bernacki <gjb@semihalf.com>
809 Date: Mon Sep 10 17:39:08 2007 +0200
811 [MPC512x] Streamline frame handling in the FEC driver
813 - convert frame size settings to be derived from a single base
814 - set frame size to the recommended default value
816 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
818 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
819 Author: Kyungmin Park <kmpark@infradead.org>
820 Date: Mon Sep 10 11:34:00 2007 +0900
822 Remove compiler warning: target CPU does not support interworking
824 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
826 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
827 Author: Wolfgang Denk <wd@denx.de>
828 Date: Sun Sep 9 21:21:33 2007 +0200
830 Fix compile error in spc1920 config.
832 Signed-off-by: Markus Klotzbücher <mk@denx.de>
833 Signed-off-by: Wolfgang Denk <wd@denx.de>
835 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
836 Author: Grant Likely <grant.likely@secretlab.ca>
837 Date: Fri Sep 7 09:25:07 2007 -0600
839 Bugfix: make bootm+libfdt compile on boards with no flash
841 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
843 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
844 Author: Grzegorz Bernacki <gjb@semihalf.com>
845 Date: Fri Sep 7 18:35:37 2007 +0200
847 [PPC440SPe] PCIe environment settings for Katmai and Yucca
849 - 'pciconfighost' is set by default in order to be able to scan bridges
850 behind the primary host/PCIe
852 - 'pciscandelay' env variable is recognized to allow for user-controlled
853 delay before the PCIe bus enumeration; some peripheral devices require a
854 significant delay before they can be scanned (e.g. LSI8408E); without the
855 delay they are not detected
857 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
859 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
860 Author: Grzegorz Bernacki <gjb@semihalf.com>
861 Date: Fri Sep 7 18:20:23 2007 +0200
863 [PPC440SPe] Improve PCIe configuration space access
865 - correct configuration space mapping
866 - correct bus numbering
867 - better access to config space
869 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
870 first device on the first bus. We now allow to configure up to 16 buses;
871 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
872 peripheral devices farther in hierarchy can be identified.
874 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
876 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
877 Author: Grzegorz Bernacki <gjb@semihalf.com>
878 Date: Fri Sep 7 17:46:18 2007 +0200
880 [PPC440SPe] Convert machine check exceptions handling
882 Convert using fixup mechanism to suppressing MCK for the duration of config
883 read/write transaction: while fixups work fine with the case of a precise
884 exception, we identified a major drawback with this approach when there's
885 an imprecise case. In this scenario there is the following race condition:
886 the fixup is (by design) set to catch the instruction following the one
887 actually causing the exception; if an interrupt (e.g. decrementer) happens
888 between those two instructions, the ISR code is executed before the fixup
889 handler the machine check is no longer protected by the fixup handler as it
890 appears as within the ISR code. In consequence the fixup approach is being
891 phased out and replaced with explicit suppressing of MCK during a PCIe
892 config read/write cycle.
894 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
896 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
897 Author: Wolfgang Denk <wd@denx.de>
898 Date: Fri Sep 7 17:43:36 2007 +0200
900 Fix typo in MAKEALL script.
902 Signed-off-by: Wolfgang Denk <wd@denx.de>
904 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
905 Author: Grzegorz Bernacki <gjb@semihalf.com>
906 Date: Fri Sep 7 17:09:21 2007 +0200
908 [MPC512x] Proper handling of larger frames in the FEC driver
910 When frame larger than local RX buffer is received, it is split and handled
911 by two buffer descriptors. Prior to this patch the FEC driver discarded
912 contents of a buffer descriptor without the 'LAST' bit set, so the first
913 part of the frame was lost in case of larger frames. This fix allows to
914 safely combine the two pieces into the whole frame.
916 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
918 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
919 Author: Rafal Jaworowski <raj@semihalf.com>
920 Date: Fri Sep 7 17:05:36 2007 +0200
922 [MPC512x] Correct fixup relocation
924 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
926 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
927 Author: Wolfgang Denk <wd@denx.de>
928 Date: Fri Sep 7 01:21:25 2007 +0200
930 Update CHANGELOG, minor coding style cleanup.
932 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
933 Author: stefano babic <sbabic@denx.de>
934 Date: Thu Aug 30 23:01:49 2007 +0200
936 PXA270: Added support for TrizepsIV board.
938 This patch add support for the Trizeps IV module (520Mhz).
940 Signed-off-by: Stefano Babic <sbabic@denx.de>
942 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
943 Author: stefano babic <sbabic@denx.de>
944 Date: Thu Aug 30 22:57:04 2007 +0200
946 PXA270: Add support for multiple serial ports.
948 This patch adds support for multiple serial ports to the PXA target.
949 FFUART, BTUART and STUART are supported.
951 Signed-off-by: Stefano Babic <sbabic@denx.de>
953 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
954 Author: stefano babic <sbabic@denx.de>
955 Date: Thu Aug 30 22:48:47 2007 +0200
957 PXA270: fix compile issue (invalid lvalue)
959 Code is broken for PXA270 due to "invalid lvalue in assignment".
961 This patch fix it in pxa-regs.h
963 Signed-off-by: Stefano Babic <sbabic@denx.de>
965 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
966 Author: Jason Jin <Jason.jin@freescale.com>
967 Date: Thu Aug 30 18:19:05 2007 +0800
969 Add BUILD_DIR support for bios emulator.
971 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
973 commit b4d8a55145442f136982634862341a3e02002bda
974 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
975 Date: Fri Aug 31 14:41:51 2007 +0900
977 [MIPS] Remove inline asm string functions
979 Stop using inline string functions on MIPS as other ARCHs do so,
980 since the optimized inline asm versions are not small.
982 This change is triggered by a following MIPS build error:
983 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
984 common/exports.c:32: undefined reference to `strcmp'
985 make: *** [u-boot] Error 1
987 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
989 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
990 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
991 Date: Fri Aug 31 14:41:45 2007 +0900
993 [MIPS] Update asm string header
995 This patches contains several bugfixes and cleanups in the latest upstream:
997 - Don't include linux/config.h
998 - Remove buggy inline version of memscan.
999 - Merge with Linux 2.6.11-rc3.
1000 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
1001 - Goodbye mips64. 31704 lines of code bite the dust.
1002 - Replace extern inline with static inline.
1003 - Fix return value of strncpy.
1004 - Remove a bunch more "$1" clobbers.
1006 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1008 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
1009 Author: Bartlomiej Sieka <tur@semihalf.com>
1010 Date: Tue Sep 4 17:31:22 2007 +0200
1012 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
1014 Fix incorrect blob address calculation in do_bootm_linux() that prevents
1015 booting the kernel from a multi-file image (kernel + initrd + blob).
1017 Also, make minor updates to the U-Boot's output and to the coding style.
1019 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1021 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
1022 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
1023 Date: Fri Aug 31 14:29:04 2007 +0200
1025 Add support for Sil680 IDE controller.
1027 o add drivers/sil680.c to support the Sil680 IDE-controller.
1028 o drivers/Makefile: add sil680.o.
1030 Signed-off-by: Gary Jennejohn <garyj@denx.de>
1032 commit e79021223bc339df655e360645a52c457a74b067
1033 Author: Grant Likely <grant.likely@secretlab.ca>
1034 Date: Thu Sep 6 09:47:40 2007 -0600
1036 bootm/fdt: Only process the fdt if an fdt address was provided
1038 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
1039 kernels using the board info structure (instead of passing a device tree)
1040 This change allows the old style booting to be used if the fdt argument
1041 was not passed to 'bootm'.
1043 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1044 Acked-by: Kim Phillips <kim.phillips@freescale.com>
1046 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
1047 Author: Grant Likely <grant.likely@secretlab.ca>
1048 Date: Thu Sep 6 09:46:23 2007 -0600
1050 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
1052 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
1054 Tested on: lite5200b
1056 Note: the fixup functions have not been moved to a common place. This
1057 patch is targeted for immediate merging as in solves a build issue, but
1058 the final name/location of the fixups is still subject to debate. I
1059 propose to merge this now, and move the fixups in the next merge window
1060 to be usable by all targets.
1062 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1064 commit 41bb76e941929f54a73206fb132f7a4c275543a3
1065 Author: Grant Likely <grant.likely@secretlab.ca>
1066 Date: Thu Sep 6 09:46:17 2007 -0600
1068 libfdt: add convenience function fdt_find_and_setprop()
1070 Given the path to a node, fdt_find_and_setprop() allows a property value
1073 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1075 commit 80767a6cead9990d9e77e62be947843c2c72f469
1076 Author: Peter Pearse <peter.pearse@arm.com>
1077 Date: Wed Sep 5 16:04:41 2007 +0100
1079 Changed API name to coloured_led.h
1080 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
1081 Tidied other cpu/arm920t/start.S code
1083 commit 56a9270521baaa00e12639a978302a67f61ef060
1084 Author: Kumar Gala <galak@kernel.crashing.org>
1085 Date: Thu Aug 30 16:18:18 2007 -0500
1087 Fix ULI RTC support on MPC8544 DS
1089 The RTC on the M1575 ULI chipset requires a dummy read before
1090 we are able to talk to the RTC. We accomplish this by adding a
1091 second memory region to the PHB the ULI is on and read from it.
1093 The second region is added to maintain compatiabilty with Linux's
1094 view of the PCI memory map.
1096 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1098 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
1099 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1100 Date: Thu Aug 30 01:58:48 2007 -0500
1102 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
1104 pcie is now differentiated from pci. Add 8641 bus-range updates.
1106 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1108 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
1109 Author: Peter Pearse <peter.pearse@arm.com>
1110 Date: Tue Sep 4 16:18:38 2007 +0100
1112 Add coloured led interface for ARM boards.
1113 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
1115 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
1116 Author: Peter Pearse <peter.pearse@arm.com>
1117 Date: Tue Sep 4 14:49:28 2007 +0100
1119 Move include/led.h to board/at91rm9200dk
1121 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
1122 Author: Peter Pearse <peter.pearse@arm.com>
1123 Date: Tue Sep 4 14:25:51 2007 +0100
1125 Ran Lindent on drivers/at45.c
1127 commit 557ab89d294f08dd532f21d19861b40093200a33
1128 Author: Peter Pearse <peter.pearse@arm.com>
1129 Date: Tue Sep 4 14:23:50 2007 +0100
1131 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
1133 commit 81b73dec16fd1227369a191e725e10044a9d56b8
1134 Author: Gary Jennejohn <garyj@denx.de>
1135 Date: Fri Aug 31 15:21:46 2007 +0200
1137 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
1139 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
1140 set to non-zero, because it doesn't support MRM (memory-read-
1141 multiple) correctly. We now added the possibility to configure
1142 this register in the board config file, so that the default value
1143 of 8 can be overridden.
1145 Here the details of this patch:
1147 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
1148 board-specific settings. As an example the sequoia board requires 0.
1149 Idea from Stefan Roese <sr@denx.de>.
1150 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
1151 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
1152 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
1153 CFG_PCI_CACHE_LINE_SIZE to 0.
1155 Signed-off-by: Gary Jennejohn <garyj@denx.de>
1156 Signed-off-by: Stefan Roese <sr@denx.de>
1158 commit 60174746c668b309378a91488dded898e9553eae
1159 Author: Wolfgang Denk <wd@denx.de>
1160 Date: Fri Aug 31 10:01:51 2007 +0200
1162 Fix TFTP OACK code for short packets.
1164 The old code had a loop limit overflow bug which caused a semi-
1165 infinite loop for small packets, because in "i<len-8", "i" was signed,
1166 but "len" was unsigned, and "len-8" became a huge number for small
1169 This is a workaround which replaces broken commit 8f1bc284.
1171 Signed-off-by: Wolfgang Denk <wd@denx.de>
1173 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
1174 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
1175 Date: Thu Aug 30 15:03:05 2007 +0200
1177 Reduce BOOTDELAY variable to 1 second by default for STK1002
1179 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
1180 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1182 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
1183 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
1184 Date: Thu Aug 30 15:03:04 2007 +0200
1186 Remove double quotation marks around MAC address for STK1002
1188 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
1189 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1191 commit ff13ac8c7bbebb238e339592de765c546dba1073
1192 Author: Wolfgang Denk <wd@denx.de>
1193 Date: Thu Aug 30 14:42:15 2007 +0200
1195 Backout commit 8f1bc284 as it causes TFTP to fail.
1197 Signed-off-by: Wolfgang Denk <wd@denx.de>
1199 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
1200 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1201 Date: Thu Aug 30 02:26:17 2007 -0500
1203 Revert "Fix MPC8544DS PCIe3 scsi."
1205 This reverts commit 9468e680.
1206 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
1208 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1210 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
1211 Author: Grant Likely <grant.likely@secretlab.ca>
1212 Date: Wed Aug 29 18:26:24 2007 -0600
1214 tftp: don't implicity trust the format of recevied packets
1216 The TFTP OACK code trusts that the incoming packet is formated as
1217 ASCII text and can be processed by string functions. It also has a
1218 loop limit overflow bug where if the packet length is less than 8, it
1219 ends up looping over *all* of memory to find the 'blksize' string.
1221 This patch solves the problem by forcing the packet to be null
1222 terminated and using strstr() to search for the sub string.
1224 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1226 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
1227 Author: Stefan Roese <sr@denx.de>
1228 Date: Wed Aug 29 16:31:18 2007 +0200
1230 ppc4xx: Change lwmon5 default environment to support Linux RTC
1232 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
1233 to supply the RTC I2C address as bootline parameter. This patch
1234 adds support for this rtc probing parameter to the bootargs:
1236 "rtc-pcf8563.probe=0,0x51"
1238 Signed-off-by: Stefan Roese <sr@denx.de>
1240 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
1241 Author: Kim Phillips <kim.phillips@freescale.com>
1242 Date: Wed Aug 29 09:06:05 2007 -0500
1244 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
1246 this had slipped through the cracks, since the sbc board was added
1247 after I wrote the original patch to remove all these symbols, and
1248 before it was merged.
1250 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1252 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
1253 Author: Wolfgang Denk <wd@denx.de>
1254 Date: Wed Aug 29 14:05:30 2007 +0200
1256 Add mii_init() prototype
1258 to get rid of a *lot* of compiler warnings.
1260 Signed-off-by: Wolfgang Denk <wd@denx.de>
1262 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
1263 Author: Wolfgang Denk <wd@denx.de>
1264 Date: Wed Aug 29 13:35:03 2007 +0200
1266 Disable network support on cmi_mpc5xx board
1268 ..because it caused compiler errors and there seems to be no
1269 board maintainer to take care of this.
1271 Signed-off-by: Wolfgang Denk <wd@denx.de>
1273 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
1274 Author: Kumar Gala <galak@kernel.crashing.org>
1275 Date: Mon Aug 20 09:44:00 2007 -0500
1277 Fix MPC8544DS PCIe3 scsi.
1279 <ed.swarthout@freescale.com>
1281 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
1282 is allocating memory space it doesn't need.
1284 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
1285 Signed-off-by: Andy Fleming <afleming@freescale.com>
1287 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
1288 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1289 Date: Tue Aug 21 09:38:59 2007 -0500
1293 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
1294 correct consoledev needed for linux boot.
1295 Standardize on fdt{file,addr} var to hold dtb file name.
1297 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
1299 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1301 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
1302 Author: Haiying Wang <Haiying.Wang@freescale.com>
1303 Date: Thu Aug 23 15:20:54 2007 -0400
1305 Enable L2 cache for MPC8568MDS board
1307 The L2 cache size is 512KB for 8568, print out the correct informaiton.
1309 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1311 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
1312 Author: Jason Jin <Jason.jin@freescale.com>
1313 Date: Wed Aug 22 17:54:49 2007 +0800
1315 Remove the bios emulator binary files from MAI board
1317 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
1319 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
1320 Author: Kim Phillips <kim.phillips@freescale.com>
1321 Date: Tue Aug 21 17:00:17 2007 -0500
1323 support board vendor-common makefiles
1325 if a board/$(VENDOR)/common/Makefile exists, build it.
1327 also add the first such case, board/freescale/common/Makefile, to
1328 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
1329 dictated by board configuration.
1331 thusly get rid of alternate build dir errors such as:
1333 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
1335 by putting the common/ mkdir command in its proper place (the common
1336 Makefile). Common bits from existing individual board Makefiles have
1339 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1341 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
1342 Author: stefano babic <sbabic@denx.de>
1343 Date: Tue Aug 21 15:52:33 2007 +0200
1345 Fix: TFTP is not working on little endian systems
1347 TFTP does not work anymore after multicast tftp
1348 patch was applied on little endian systems.
1351 Signed-off-by: Stefano Babic <sbabic@denx.de>
1353 commit 5f470948570526e9186f053a3003da7719604e90
1354 Author: stefano babic <sbabic@denx.de>
1355 Date: Tue Aug 21 15:50:33 2007 +0200
1357 Fix MAC address setting in DM9000 driver.
1359 The logic to check if there is a correct MAC address in the DM9000
1360 EEPROM, added in the last patch, is wrong. Now the MAC address is
1361 always taken from the environment, even if a suitable MAC is present
1364 Signed-off-by: Stefano Babic <sbabic@denx.de>
1366 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
1367 Author: Martin Krause <martin.krause@tqs.de>
1368 Date: Tue Aug 21 12:40:34 2007 +0200
1370 MPC5xxx: fix some compiler warnings in USB code
1372 Fix the following warnings:
1373 - usb.c:xx: warning: function declaration isn't a prototype
1374 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
1375 from pointer wihtout a cast
1377 Signed-off-by: Martin Krause <martin.krase@tqs.de>
1379 commit 16e23c3f5dab6937f5109365416808c7f15c122b
1380 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1381 Date: Mon Aug 20 23:55:33 2007 -0500
1383 fsl_pci_init - Remove self PCSRBAR allocation
1385 CPU physical address space was being wasted by allocating a
1386 PCSRBAR PCI inbound region to it's memory space.
1388 As a rule, PCSRBAR should be left alone since it does not affect
1389 transactions from self and other masters may have changed it.
1391 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
1393 commit 0e700ce03a23bb1921149bc77008ace7103d5289
1394 Author: Martin Krause <martin.krause@tqs.de>
1395 Date: Mon Aug 20 13:56:47 2007 +0200
1397 Fix compiler warning in include/s3c2410.h
1399 This patch fixes the "type qualifiers ignored on fuction return tpye"
1400 warning for include/s3c2410.h
1402 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1404 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
1405 Author: Dirk Behme <dirk.behme@googlemail.com>
1406 Date: Mon Aug 20 07:09:05 2007 +0200
1408 Fix compilation error for omap2420h4_config.
1410 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
1411 and flash_probe() calls in env_flash.c.
1413 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
1415 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
1416 Author: Kim Phillips <kim.phillips@freescale.com>
1417 Date: Fri Aug 10 14:34:14 2007 -0500
1419 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
1421 and make some minor corrections to the FDT part of the README.
1423 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1425 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
1426 Author: Wolfgang Denk <wd@denx.de>
1427 Date: Wed Aug 29 01:32:05 2007 +0200
1429 Minor coding style cleanup.
1431 Signed-off-by: Wolfgang Denk <wd@denx.de>
1433 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
1434 Author: Heiko Schocher <hs@pollux.denx.de>
1435 Date: Tue Aug 28 17:40:33 2007 +0200
1437 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
1439 Signed-off-by: Heiko Schocher <hs@denx.de>
1441 commit f98984cb194bb34dbe1db9429d3b51133af30d07
1442 Author: Heiko Schocher <hs@pollux.denx.de>
1443 Date: Tue Aug 28 17:39:14 2007 +0200
1445 IDE: - make ide_inb () and ide_outb () "weak", so boards can
1446 define there own I/O functions.
1447 (Needed for the pcs440ep board).
1448 - The default I/O Functions are again 8 Bit accesses.
1449 - Added CONFIG_CMD_IDE for the pcs440ep Board.
1451 Signed-off-by: Heiko Schocher <hs@denx.de>
1453 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
1454 Author: Semih Hazar <semih.hazar@indefia.com>
1455 Date: Mon Aug 20 19:00:01 2007 +0300
1457 AVR32: Change prototype of memset
1459 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
1460 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1462 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
1463 Author: Yuri Tikhonov <yur@emcraft.com>
1464 Date: Sat Aug 25 05:07:16 2007 +0200
1466 POST: limit memory test area to not touch global data anymore
1468 As experienced on lwmon5, on some boards the POST memory test can
1469 corrupt the global data buffer (bd). This patch fixes this issue
1470 by checking and limiting this area.
1472 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
1473 Signed-off-by: Stefan Roese <sr@denx.de>
1475 commit 75e1a84d483e36be10e206e539b028c4889e1158
1476 Author: Stefan Roese <sr@denx.de>
1477 Date: Fri Aug 24 15:41:42 2007 +0200
1479 ppc4xx: Add RTC POST test to lwmon5 board configuration
1481 Since this RTC POST test is taking quite a while to complete
1482 it's only initiated upon special keypress same as the complete
1485 Signed-off-by: Stefan Roese <sr@denx.de>
1487 commit d7bfa620037a6d2210159387571bdf93aa32c162
1488 Author: Stefan Roese <sr@denx.de>
1489 Date: Fri Aug 24 15:19:10 2007 +0200
1491 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
1493 Signed-off-by: Stefan Roese <sr@denx.de>
1495 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
1496 Author: Stefan Roese <sr@denx.de>
1497 Date: Thu Aug 23 11:02:37 2007 +0200
1499 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
1501 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
1502 board. Now the "eeprom" command can be used to read/write from/to this
1503 device. Additionally a new command was added "eepromwp" to en-/disable
1504 the write-protect of this 2nd EEPROM.
1506 The 1st EEPROM is not affected by this write-protect command.
1508 Signed-off-by: Stefan Roese <sr@denx.de>
1510 commit c64fb30e4c5976007d56fc1789c7a0666082b536
1511 Author: Stefan Roese <sr@denx.de>
1512 Date: Wed Aug 22 08:56:09 2007 +0200
1514 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
1516 Signed-off-by: Stefan Roese <sr@denx.de>
1518 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
1519 Author: Stefan Roese <sr@denx.de>
1520 Date: Tue Aug 21 16:27:57 2007 +0200
1522 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
1524 This patch adds support for the matrix keyboard on the lwmon5 board.
1525 Since the implementation in the dsPCI is kind of compatible with the
1526 "old" lwmon board, most of the code is copied from the lwmon
1529 Signed-off-by: Stefan Roese <sr@denx.de>
1531 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
1532 Author: Wolfgang Denk <wd@denx.de>
1533 Date: Sun Aug 19 10:27:34 2007 +0200
1535 Fix some build errors.
1537 Signed-off-by: Wolfgang Denk <wd@denx.de>
1539 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
1540 Author: Wolfgang Denk <wd@denx.de>
1541 Date: Sat Aug 18 22:00:38 2007 +0200
1545 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
1546 Author: Kim Phillips <kim.phillips@freescale.com>
1547 Date: Thu Aug 16 22:52:39 2007 -0500
1549 lib_ppc: make board_add_ram_info weak
1551 platforms wishing to display RAM diagnostics in addition to size,
1552 can do so, on one line, in their own board_add_ram_info()
1555 this consequently eliminates CONFIG_ADD_RAM_INFO.
1557 Thanks to Stefan for the hint.
1559 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1561 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
1562 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1563 Date: Fri Aug 17 12:43:44 2007 +0900
1565 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
1567 This patch has been sent on:
1570 Many users of PCI config read routines tend to ignore the function
1571 ret value, and are only concerned about the contents of *val. Based
1572 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
1573 the *val on dword read error.
1575 Without this fix, for example, we'll go on scanning bus with vendor or
1576 header_type uninitialized. This brings many unnecessary config trials.
1578 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1580 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
1581 Author: Stefan Roese <sr@denx.de>
1582 Date: Sat Aug 18 14:37:52 2007 +0200
1584 ColdFire: Fix some remaining problems with CFG_CMD_
1586 Signed-off-by: Stefan Roese <sr@denx.de>
1588 commit 8280f6a1c43247616b68224675188e5ccd124650
1589 Author: Stefan Roese <sr@denx.de>
1590 Date: Sat Aug 18 14:33:02 2007 +0200
1592 Coding style cleanup
1594 Signed-off-by: Stefan Roese <sr@denx.de>
1596 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
1597 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1598 Date: Thu Aug 16 19:23:50 2007 -0500
1600 ColdFire: Add M5235EVB Platform for MCF523x
1602 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1604 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
1605 Author: Kim Phillips <kim.phillips@freescale.com>
1606 Date: Fri Aug 17 09:30:00 2007 -0500
1608 mpc83xx: fix typo in DDR2 programming
1610 introduced in the implement board_add_ram_info patch as I was cleaning out the
1611 magic numbers. sorry.
1613 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1615 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
1616 Author: Kim Phillips <kim.phillips@freescale.com>
1617 Date: Thu Aug 16 22:53:09 2007 -0500
1619 mpc83xx: move freescale boards to boards/freescale
1621 includes build fixes.
1623 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1625 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
1626 Author: Kim Phillips <kim.phillips@freescale.com>
1627 Date: Thu Aug 16 22:52:59 2007 -0500
1629 mpc83xx: suppress unused variable 'val8' warning
1631 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1633 commit bbea46f76f767b919070b4829bf34c86bd223248
1634 Author: Kim Phillips <kim.phillips@freescale.com>
1635 Date: Thu Aug 16 22:52:48 2007 -0500
1637 mpc83xx: implement board_add_ram_info
1639 add board_add_ram_info, to make memory diagnostic output more
1640 consistent. u-boot banner output now looks like:
1642 DRAM: 256 MB (DDR1, 64-bit, ECC on)
1644 and for boards with SDRAM on the local bus, a line such as this is
1647 SDRAM: 64 MB (local bus)
1649 also replaced some magic numbers with their equivalent define names.
1651 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1653 commit 14778585d1389d86d5846efec29e5fce892680ce
1654 Author: Tony Li <tony.li@freescale.com>
1655 Date: Fri Aug 17 10:35:59 2007 +0800
1657 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
1659 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
1660 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
1662 Signed-off-by Tony Li <tony.li@freescale.com>
1664 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
1665 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1666 Date: Thu Aug 16 15:05:11 2007 -0500
1668 ColdFire: Add M54455EVB for MCF5445x
1670 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1672 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
1673 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1674 Date: Thu Aug 16 13:20:50 2007 -0500
1676 ColdFire: Add M5253EVBE platform for MCF52x2
1678 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1680 commit a605aacd8324094199402816cc6d9124aba57b8d
1681 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1682 Date: Thu Aug 16 05:04:31 2007 -0500
1684 ColdFire: Add M5249EVB platform for MCF52x2
1686 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1688 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
1689 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1690 Date: Wed Aug 15 20:32:06 2007 -0500
1692 ColdFire: Update Freescale MCF52x2 platforms
1694 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1696 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
1697 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1698 Date: Wed Aug 15 19:55:10 2007 -0500
1700 ColdFire: Update EB+MCF-EV123 platform
1702 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1704 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
1705 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1706 Date: Wed Aug 15 19:46:38 2007 -0500
1708 ColdFire: update TASREG platform for MCF52x2
1710 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1712 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
1713 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1714 Date: Wed Aug 15 19:45:51 2007 -0500
1716 ColdFire: update r5200 platform for MCF52x2
1718 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1720 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
1721 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1722 Date: Wed Aug 15 19:43:20 2007 -0500
1724 ColdFire: idmr platform MCF52x2 update
1726 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1728 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
1729 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1730 Date: Wed Aug 15 19:41:06 2007 -0500
1732 ColdFire: cobra5272 platform for MCF52x2 update
1734 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1736 commit 56115665b4a64c10c01440c57749b265e0908fa4
1737 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1738 Date: Wed Aug 15 19:38:15 2007 -0500
1740 ColdFire: MCF52x2 Header files update
1742 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1744 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
1745 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1746 Date: Wed Aug 15 19:21:21 2007 -0500
1748 ColdFire: MCF52x2 update
1750 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1752 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
1753 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1754 Date: Wed Aug 15 18:46:11 2007 -0500
1756 ColdFire: MCF5329 update cache
1758 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1760 commit 7171977fb8fd77cfb6676953fa9a05789c450513
1761 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1762 Date: Wed Aug 15 15:40:20 2007 -0500
1764 ColdFire: MCF5329 header file clean up
1766 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1768 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
1769 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1770 Date: Wed Aug 15 15:39:17 2007 -0500
1772 ColdFire: MCF5329 Update and cleanup
1774 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1776 commit 10327dc5541f947c0cf7e31fef86c4706169607a
1777 Author: Andy Fleming <afleming@freescale.com>
1778 Date: Thu Aug 16 16:35:02 2007 -0500
1780 Add CONFIG_HAS_ETH0 to all boards with TSEC
1782 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
1783 to update TSEC1's device-tree node, so we need to add it
1784 to all the boards with TSECs. Do this for 83xx and 86xx, too,
1785 since they will eventually do something similar.
1787 Signed-off-by: Andy Fleming <afleming@freescale.com>
1789 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
1790 Author: Kumar Gala <galak@kernel.crashing.org>
1791 Date: Thu Aug 16 15:05:04 2007 -0500
1793 Update MPC8544 DS PCI memory map
1795 The PCIe bus that the ULI M1575 is connected to has no possible way of
1796 needing more than the fixed amount of IO & Memory space needed by the ULI.
1798 So make it use far less IO & memory space and have it use the shared LAW. This
1799 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
1802 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1804 commit ea5877e31ed63ade948fd1293895ec23fe01472e
1805 Author: Kumar Gala <galak@kernel.crashing.org>
1806 Date: Thu Aug 16 11:01:21 2007 -0500
1808 Fix up some fdt issues on 8544DS
1810 It looks like we had a merge issue that duplicated a bit of code
1811 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
1812 the MAC address properly set in the device tree on boot for TSEC1
1814 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1816 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
1817 Author: Niklaus Giger <niklaus.giger@netstal.com>
1818 Date: Thu Aug 16 15:16:03 2007 +0200
1820 PPC4xx:HCU4/5 cleanup
1822 Minor cleanups to confirm to the u-boot coding style.
1823 Some german expressions -> english.
1824 HCU5 enforces a unique IP adress for a given slot in the rack.
1826 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1828 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
1829 Author: Niklaus Giger <niklaus.giger@netstal.com>
1830 Date: Thu Aug 16 15:16:02 2007 +0200
1832 PPC4xx:HCU4/5 cleanup ecc/sdram init
1834 Make ecc initialisation robust, as DDR2-ECC errors may be generated
1835 while zeroing the RAM.
1837 Return 16 bytes (a cacheline) less than the available memory, as the
1838 board and/or PPC440EPx might have problems accessing the last bytes.
1840 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1842 commit d35b508a55508535b6e8445b718585d27df733d3
1843 Author: Kim Phillips <kim.phillips@freescale.com>
1844 Date: Wed Aug 15 22:29:56 2007 -0500
1846 fdt: suppress unused variable 'bd' warning
1848 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1850 commit 82bd9ee77490588d4da785d75829ca63d0176baf
1851 Author: Andy Fleming <afleming@freescale.com>
1852 Date: Wed Aug 15 20:06:50 2007 -0500
1854 Fix warnings from of_data copy fix
1856 Forgot to cast of_flat_tree to ulong.
1858 Signed-off-by: Andy Fleming <afleming@freescale.com>
1860 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
1861 Author: Andy Fleming <afleming@freescale.com>
1862 Date: Wed Aug 15 20:03:44 2007 -0500
1864 Don't wait for disconnected TSECs
1866 The TSEC driver's PHY code waits a long time for autonegotiation to
1867 complete, even if the link is down. The PHY knows the link is
1868 down or up before autonegotiation completes, so we can short-circuit
1869 the process if the link is down.
1871 Signed-off-by: Andy Fleming <afleming@freescale.com>
1873 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
1874 Author: Andy Fleming <afleming@freescale.com>
1875 Date: Wed Aug 15 20:03:34 2007 -0500
1877 Fix numerous bugs in the 8568 UEC support
1879 Actually, fixed a large bug in the UEC for *all* platforms.
1880 How did this ever work?
1882 uec_init() did not follow the spec for eth_init(), and returned
1883 0 on success. Switch it to return the link like tsec_init()
1886 The immap for the 8568 was defined based on MPC8568, rather than
1891 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
1893 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
1896 Signed-off-by: Andy Fleming <afleming@freescale.com>
1898 commit 3a79013e2adda53332dfd0b511066a805e929a9d
1899 Author: Andy Fleming <afleming@freescale.com>
1900 Date: Wed Aug 15 20:03:25 2007 -0500
1902 Define tsec flag values in config files
1904 The tsec_info structure and array has a "flags" field for each
1905 ethernet controller. This field is the only reason there are
1906 settings. Switch to defining TSECn_FLAGS for each controller
1907 in the config header, and we can greatly simplify the array, and
1908 also simplify the addition of future boards.
1910 Signed-off-by: Andy Fleming <afleming@freescale.com>
1912 commit ec7238229507e7f47533a611ea8c53319d234cf3
1913 Author: Andy Fleming <afleming@freescale.com>
1914 Date: Wed Aug 15 20:03:13 2007 -0500
1916 Add support for building all boards with a TSEC
1918 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
1919 Now we can do a MAKEALL test on all of them!
1921 Signed-off-by: Andy Fleming <afleming@freescale.com>
1923 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
1924 Author: Andy Fleming <afleming@freescale.com>
1925 Date: Wed Aug 15 17:30:56 2007 -0500
1927 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
1929 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
1930 neglected to *also* put the code inside the similar #ifdef
1931 for CONFIG_OF_FLAT_TREE.
1933 Signed-off-by: Andy Fleming <afleming@freescale.com>
1935 commit 78f9fef7f406078c8bf7191e665a73f795157746
1936 Author: Scott Wood <scottwood@freescale.com>
1937 Date: Wed Aug 15 15:46:46 2007 -0500
1939 mpc885ads: Don't define CONFIG_BZIP2.
1941 bzip2 requires a significant chunk of malloc space, and there isn't
1942 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
1943 and a downloaded image at 0x400000.
1945 Signed-off-by: Scott Wood <scottwood@freescale.com>
1947 commit 002275a3ed8b114885f6702d6d544d0780dfe689
1948 Author: Michal Simek <Monstr@seznam.cz>
1949 Date: Thu Aug 16 08:54:10 2007 +0200
1951 Bios emulator - fix microblaze toolchain problem
1953 microblaze CPU have problem with bios_emulator code.
1954 Microblaze toolchain doesn't support PRAGMA PACK.
1956 Signed-off-by: Michal Simek <monstr@monstr.eu>
1958 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
1959 Author: Wolfgang Denk <wd@denx.de>
1960 Date: Thu Aug 16 11:51:04 2007 +0200
1962 Minor Coding Style fix; Update CHANGELOG file.
1964 Signed-off-by: Wolfgang Denk <wd@denx.de>
1966 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
1967 Author: Stefan Roese <sr@denx.de>
1968 Date: Thu Aug 16 11:21:49 2007 +0200
1970 ppc4xx: Remove #warning in esd auto_update.c
1972 Signed-off-by: Stefan Roese <sr@denx.de>
1974 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
1975 Author: Stefan Roese <sr@denx.de>
1976 Date: Fri Jun 22 17:32:28 2007 +0200
1978 ppc7xx: Update CPCI750 board
1980 This small CPCI750 update extends the board specific command
1981 "show_config" to display the Marvell strapping registers and
1982 extends the PCI IDE controller.
1984 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
1985 Signed-off-by: Stefan Roese <sr@denx.de>
1987 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
1988 Author: Michal Simek <monstr@monstr.eu>
1989 Date: Thu Aug 16 10:46:28 2007 +0200
1991 [FIX] Changes for bios_emulator code for others architecture
1993 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
1994 Author: Michal Simek <monstr@monstr.eu>
1995 Date: Thu Aug 16 10:45:09 2007 +0200
1997 [FIX] Remove unused include file
1999 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
2000 Author: Stefan Roese <sr@denx.de>
2001 Date: Thu Aug 16 10:18:33 2007 +0200
2003 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
2005 Signed-off-by: Stefan Roese <sr@denx.de>
2007 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
2008 Author: Stefan Roese <sr@denx.de>
2009 Date: Thu Aug 16 09:54:51 2007 +0200
2011 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
2013 Signed-off-by: Stefan Roese <sr@denx.de>
2015 commit 02ba7022f62bb75908296c58c63866e1d294b69a
2016 Author: Stefan Roese <sr@denx.de>
2017 Date: Thu Aug 16 09:52:29 2007 +0200
2019 ppc4xx: Update Sequoia/Rainier bootstrap command
2021 As suggested by David Mitchell, here an update for the Sequoia/Rainier
2024 Signed-off-by: Stefan Roese <sr@denx.de>
2026 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
2027 Author: Kim Phillips <kim.phillips@freescale.com>
2028 Date: Wed Aug 15 22:30:39 2007 -0500
2030 mpc83xx: enable libfdt by default on freescale boards
2032 this enables libfdt code by default for the
2033 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
2034 mpc8349itx and gp boards.
2036 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2038 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
2039 Author: Kim Phillips <kim.phillips@freescale.com>
2040 Date: Wed Aug 15 22:30:33 2007 -0500
2042 mpc83xx: migrate remaining freescale boards to libfdt
2044 this adds libfdt support code for the freescale
2045 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
2048 Boards remain compatible with OF_FLAT_TREE.
2050 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2052 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
2053 Author: Kim Phillips <kim.phillips@freescale.com>
2054 Date: Wed Aug 15 22:30:26 2007 -0500
2056 mpc83xx: move common /memory node update mechanism to cpu.c
2058 also adds common prototypes to include/common.h.
2060 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2062 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
2063 Author: Kim Phillips <kim.phillips@freescale.com>
2064 Date: Wed Aug 15 22:30:19 2007 -0500
2066 mpc83xx: remaining 8360 libfdt fixes
2068 PCI clocks and QE frequencies weren't being updated, and the core clock
2069 was being updated incorrectly. This patch also adds a /memory node if
2070 it doesn't already exist prior to update.
2072 plus some cosmetic trimming to single line comments.
2074 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2076 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
2077 Author: Kim Phillips <kim.phillips@freescale.com>
2078 Date: Wed Aug 15 22:30:12 2007 -0500
2080 mpc83xx: fix UEC2->1 typo in libfdt setup code
2082 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2084 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
2085 Author: Kim Phillips <kim.phillips@freescale.com>
2086 Date: Wed Aug 15 22:30:05 2007 -0500
2088 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
2090 and reorder the existing 83xx maintainers alpha.
2092 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2094 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
2095 Author: Michal Simek <monstr@monstr.eu>
2096 Date: Wed Aug 15 21:15:05 2007 +0200
2098 [FIX] Resolve problem with warnings
2099 microblaze toolchain don't support PRAGMA PACK.
2101 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
2102 Author: Michal Simek <monstr@monstr.eu>
2103 Date: Wed Aug 15 21:05:07 2007 +0200
2105 [FIX] Correction command setting for Microblaze boards
2107 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
2108 Author: Michal Simek <monstr@monstr.eu>
2109 Date: Wed Aug 15 21:03:41 2007 +0200
2111 [FIX] Correction command definition
2113 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
2114 Author: Jon Loeliger <jdl@freescale.com>
2115 Date: Wed Aug 15 11:55:35 2007 -0500
2117 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
2119 Remove a leftover in net/tftp.c while we're at it.
2121 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2123 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
2124 Author: Jon Loeliger <jdl@freescale.com>
2125 Date: Wed Aug 15 12:20:40 2007 -0500
2127 Move the MPC8641HPCN board under board/freescale.
2129 Minor path corrections needed to ensure buildability.
2131 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2133 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
2134 Author: Jon Loeliger <jdl@freescale.com>
2135 Date: Wed Aug 15 11:46:22 2007 -0500
2137 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
2139 Remove a leftover in net/tftp.c while we're at it.
2141 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2143 commit 210f463c71917b7a4495c2103c228b9c179ae64d
2144 Author: Jerry Van Baren <gvb.uboot@gmail.com>
2145 Date: Wed Aug 15 11:13:15 2007 -0400
2147 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
2149 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
2150 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
2151 when it should have gone inside of the conditional. As a result, it
2152 broke non-LIBFDT board builds.
2154 Also added a missing "not." to the comment.
2156 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2158 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
2159 Author: Niklaus Giger <niklaus.giger@netstal.com>
2160 Date: Wed Aug 15 12:14:23 2007 +0200
2162 PPC4xx:HCU4/5-Board fix compile warning
2164 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2166 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
2167 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
2168 Date: Tue Aug 14 14:06:45 2007 -0500
2170 Fix malloc size error in ahci_init_one.
2172 Typically this causes scsi init to corrupt the
2173 devlist and break the coninfo command.
2174 Fix a compiler size warning.
2176 Signed-off-by: Jason Jin <jason.jin@freescale.com>
2177 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2178 Acked-by: Andy Fleming <afleming@freescale.com>
2180 commit b361acd64fd2525c081b9b288b0804efe209c0e9
2181 Author: ksi@koi8.net <ksi@koi8.net>
2182 Date: Tue Aug 14 10:02:16 2007 -0700
2184 TI DaVinci - fix unsupported %hhx format
2186 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
2188 commit f01dbb5424a81453c81190dd30e945891466f621
2189 Author: Wolfgang Denk <wd@denx.de>
2190 Date: Tue Aug 14 18:42:36 2007 +0200
2192 Coding style cleanup. Update CHANGELOG.
2194 Signed-off-by: Wolfgang Denk <wd@denx.de>
2196 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
2197 Author: Andy Fleming <afleming@freescale.com>
2198 Date: Tue Aug 14 10:32:59 2007 -0500
2200 Fix initrd/dtb interaction
2202 The original code would wrongly relocate the blob to be right before
2203 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
2204 if it is defined. So we make two changes:
2206 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
2208 2) If the blob is being relocated, relocate it before kbd, not initrd
2210 Signed-off-by: Andy Fleming <afleming@freescale.com>
2212 commit e54b970173769307a116bd34028b6d0c2eea2a4e
2213 Author: Peter Pearse <peter.pearse@arm.com>
2214 Date: Tue Aug 14 15:40:00 2007 +0100
2216 Supply spi interface in at45.c
2218 commit 4ce846ec59f36b85d6644a769690ad3feb667575
2219 Author: Stefan Roese <sr@denx.de>
2220 Date: Tue Aug 14 15:12:01 2007 +0200
2222 POST: Fix merge problem
2224 Signed-off-by: Stefan Roese <sr@denx.de>
2226 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
2227 Author: Stefan Roese <sr@denx.de>
2228 Date: Tue Aug 14 15:03:17 2007 +0200
2230 Coding style cleanup
2232 Signed-off-by: Stefan Roese <sr@denx.de>
2234 commit 779e975117a75e91fcebe226a63104dbfb924ab1
2235 Author: Stefan Roese <sr@denx.de>
2236 Date: Tue Aug 14 14:44:41 2007 +0200
2238 ppc4xx: Add initial Zeus (PPC405EP) board support
2240 Signed-off-by: Stefan Roese <sr@denx.de>
2242 commit c5a172a5fd636c12467429e3f7910e53773979c6
2243 Author: Stefan Roese <sr@denx.de>
2244 Date: Tue Aug 14 14:41:55 2007 +0200
2246 POST: Add option for external ethernet loopback test
2248 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
2249 is not done using an internal loopback connection, but by assuming
2250 that an external loopback connector is plugged into the board.
2252 Signed-off-by: Stefan Roese <sr@denx.de>
2254 commit eb2b4010ae426245172988804ee8d9193fb41038
2255 Author: Stefan Roese <sr@denx.de>
2256 Date: Tue Aug 14 14:39:44 2007 +0200
2258 POST: Add ppc405 support to cache and UART POST
2260 Signed-off-by: Stefan Roese <sr@denx.de>
2262 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
2263 Author: Peter Pearse <peter.pearse@arm.com>
2264 Date: Tue Aug 14 10:46:32 2007 +0100
2266 Replace lost end of at45.c.
2268 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
2269 Author: Peter Pearse <peter.pearse@arm.com>
2270 Date: Tue Aug 14 10:30:06 2007 +0100
2272 Update Makefiles for merged and split at45.c.
2274 commit 3454cece2db57cb9eb7087995f7e73066a163f71
2275 Author: Peter Pearse <peter.pearse@arm.com>
2276 Date: Tue Aug 14 10:21:06 2007 +0100
2278 Delete the merged files.
2280 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
2281 Author: Peter Pearse <peter.pearse@arm.com>
2282 Date: Tue Aug 14 10:14:05 2007 +0100
2286 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
2287 Author: Peter Pearse <peter.pearse@arm.com>
2288 Date: Tue Aug 14 10:10:52 2007 +0100
2290 Add MACH_TYPE records for several AT91 boards.
2291 Merge to two at45.c files into a common file, split to at45.c and spi.c
2292 Fix spelling error in DM9161 PHY Support.
2293 Initialize at91rm9200 board (and set LED).
2294 Add PIO control for at91rm9200dk LEDs and Mux.
2295 Change dataflash partition boundaries to be compatible with Linux 2.6.
2297 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
2298 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
2300 commit 4ef35e53c693556c54b0c22d6f873de87bade253
2301 Author: Wolfgang Denk <wd@denx.de>
2302 Date: Tue Aug 14 09:54:46 2007 +0200
2304 Coding style cleanup, update CHANGELOG
2306 Signed-off-by: Wolfgang Denk <wd@denx.de>
2308 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
2309 Author: Wolfgang Denk <wd@denx.de>
2310 Date: Tue Aug 14 09:47:27 2007 +0200
2312 Coding style cleanup; rebuild CHANGELOG
2314 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
2315 Author: Randy Vinson <rvinson@linuxbox.(none)>
2316 Date: Tue Feb 27 19:42:22 2007 -0700
2318 85xxCDS: Add make targets for legacy systems.
2320 The PCI ID select values on the Arcadia main board differ depending
2321 on the version of the hardware. The standard configuration supports
2322 Rev 3.1. The legacy target supports Rev 2.x.
2324 Signed-off-by Randy Vinson <rvinson@mvista.com>
2326 commit e41094c7e38177c755fbd9b182018069614f080d
2327 Author: Andy Fleming <afleming@freescale.com>
2328 Date: Tue Aug 14 01:50:09 2007 -0500
2330 85xxCDS: Enable the VIA PCI-to-ISA bridge.
2332 Author: Randy Vinson <rvinson@linuxbox.(none)>
2334 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
2337 Signed-off-by: Randy Vinson <rvinson@mvista.com>
2338 Signed-off-by: York Sun <yorksun@freescale.com>
2340 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
2341 Author: Andy Fleming <afleming@freescale.com>
2342 Date: Tue Aug 14 00:14:25 2007 -0500
2344 Add support for UEC to 8568
2346 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2347 Signed-off-by: Andy Fleming <afleming@freescale.com>
2349 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
2350 Author: Haiying Wang <Haiying.Wang@freescale.com>
2351 Date: Tue Jun 19 14:18:34 2007 -0400
2353 Add PCI support for MPC8568MDS board
2355 This patch is against u-boot-mpc85xx.git of www.denx.com
2357 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2358 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
2360 commit d111d6382c99fdea08c2312eeeae8786945e189a
2361 Author: Haiying Wang <Haiying.Wang@freescale.com>
2362 Date: Tue Jun 19 14:18:32 2007 -0400
2364 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
2366 This patch is against u-boot-mpc85xx.git of www.denx.com
2368 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
2369 both MPC8548CDS board and MPC8568MDS board, especially for supporting
2372 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
2373 DDR2 on all current board versions especially ver 1.92 or later to bring
2376 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2378 commit 3db0bef59eab1155801618cef5c481e97553b597
2379 Author: Kumar Gala <galak@kernel.crashing.org>
2380 Date: Tue Aug 7 18:07:27 2007 -0500
2382 Use an absolute address when jumping out of 4k boot page
2384 On e500 when we leave the 4k boot page we should use an absolute address since
2385 we don't know where the board code may want us to be really running at.
2387 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2389 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
2390 Author: Andy Fleming <afleming@freescale.com>
2391 Date: Mon Aug 13 14:49:59 2007 -0500
2393 MPC85xx BA bits not set for 3-bit bank address DIMM
2395 The current implementation does not set the number of bank address bits
2396 (BA) in the processor. The default assumes 2 logical bank bits. This
2397 works fine for a DIMM that uses devices with 4 internal banks (SPD
2398 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
2399 devices with 8 internal banks (SPD byte17 = 0x8).
2401 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
2403 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
2404 Author: Andy Fleming <afleming@freescale.com>
2405 Date: Mon Aug 13 14:38:06 2007 -0500
2407 Fix minor 85xx warnings
2409 Some patches had inserted warnings into the build:
2410 * mpc8560ads declared data without using it
2411 * cpu_init declared ecm and immap without using it in all CONFIGs
2412 * MPC8548CDS.h had its default filenames changed so that they contained
2413 "\m" in the paths. Made the defaults not Windows-specific (or
2416 Signed-off-by: Andy Fleming <afleming@freescale.com>
2418 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
2419 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
2420 Date: Fri Jul 27 01:50:52 2007 -0500
2422 8548cds PCIE support.
2424 Make the early L1 cache stack region guarded to prevent speculative
2425 fetches outside the locked range.
2427 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
2428 init.S whitespace cleanup.
2430 Allow TEXT_BASE value to be specified on command line. This allows it
2431 to be set to 0xfffc0000 which cuts the uboot binary in half.
2433 Clear and enable lbc and ecm errors.
2435 Update last_busno in device-tree for pci and pcie.
2437 Remove load of obsolete cpu/mpc85xx/pci.0
2439 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2440 Acked-by: Andy Fleming <afleming@freescale.com>
2442 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
2443 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
2444 Date: Fri Jul 27 01:50:51 2007 -0500
2448 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
2450 Enable LBC and ECM errors and clear error registers.
2452 Add tftpflash env var to get uboot from tftp server and flash it.
2454 Add pci/pcie convenience env vars to display register space:
2455 "run pcie3regs" to see all pcie3 ccsr registers
2456 "run pcie3cfg" to see all cfg registers
2457 Whitespace cleanup and MPC8544DS.h
2459 Enable CONFIG_INTERRUPTS.
2461 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2462 Acked-by: Andy Fleming <afleming@freescale.com>
2464 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
2465 Author: Andy Fleming <afleming@freescale.com>
2466 Date: Tue Aug 14 01:34:21 2007 -0500
2468 85xx start.S cleanup and exception support
2470 From: Ed Swarthout <Ed.Swarthout@freescale.com>
2472 Support external interrupts from platform to eliminate system hangs.
2473 Define CONFIG_INTERRUPTS board configure option to enable.
2474 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
2476 Remove extra cpu initialization redundant with hardware initialization.
2479 Define and use _START_OFFSET consistent with other processors using
2482 Move additional code from .text to boot page to make room for
2483 exception vectors at start of image.
2485 Handle Machine Check, External and Critical exceptions.
2487 Fix e500 machine check error determination in traps.c
2489 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
2491 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2492 Acked-by: Andy Fleming <afleming@freescale.com>
2494 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
2495 Author: Andy Fleming <afleming@freescale.com>
2496 Date: Tue Aug 14 01:33:18 2007 -0500
2498 Add MPC8544DS README
2500 Signed-off-by: Andy Fleming <afleming@freescale.com>
2502 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
2503 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
2504 Date: Fri Jul 27 01:50:48 2007 -0500
2506 85xx allow debugger to configure ddr.
2508 Only check for mpc8548 rev 1 when compiled for 8548.
2510 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2511 Acked-by: Andy Fleming <afleming@freescale.com>
2513 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
2514 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
2515 Date: Fri Jul 27 01:50:47 2007 -0500
2517 mpc85xx L2 cache reporting and SRAM relocation option.
2519 Allow debugger to override flash cs0/cs1 settings to enable alternate
2522 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2523 Acked-by: Andy Fleming <afleming@freescale.com>
2525 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
2526 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
2527 Date: Fri Jul 27 01:50:46 2007 -0500
2529 e500 needs ppc_asm.tmp MCK_EXCEPTION
2531 Always define MCK_EXCEPTION macro - so e500 can use it too.
2533 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2534 Acked-by: Andy Fleming <afleming@freescale.com>
2536 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
2537 Author: David Updegraff <dave@cray.com>
2538 Date: Mon Jun 11 10:41:07 2007 -0500
2540 multicast tftp: RFC2090
2542 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
2543 on Realtek RTL8139 and Freescale TSEC.
2545 Signed-off-by: David Updegraff <dave@cray.com>
2546 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2548 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
2549 Author: Wilson Callan <wcallan@savantav.com>
2550 Date: Sat Jul 28 10:56:13 2007 -0400
2552 New CONFIG_BOOTP_SERVERIP option
2554 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
2555 from the bootp server
2557 Signed-off-by: Wilson Callan <wcallan@savantav.com>
2558 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2560 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
2561 Author: Mike Rapoport <mike@compulab.co.il>
2562 Date: Sun Aug 12 08:48:27 2007 +0300
2564 Add ability to take MAC address from the environment to DM9000 driver
2566 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
2567 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2569 commit be5d72d10d47609326226225181e301fb9a33b58
2570 Author: Wolfgang Denk <wd@denx.de>
2571 Date: Mon Aug 13 21:57:53 2007 +0200
2573 Minor coding style cleanup. Update CHANGELOG.
2575 Signed-off-by: Wolfgang Denk <wd@denx.de>
2577 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
2578 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
2579 Date: Sat Aug 11 06:54:58 2007 -0500
2581 Modify SBC8641D to use new Freescale PCI routines
2583 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
2586 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
2587 Signde-off-by: Jon Loeliger <jdl@freescale.com>
2589 commit a08458303e7f9db67f296980036d3292c35cb45c
2590 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2591 Date: Fri Jun 29 18:38:51 2007 +0200
2593 atmel_mci: Fix data timeout value
2595 Calculate the data timeout based on values from the CSD instead of
2596 just using a hardcoded DTOR value. This is a backport of a similar fix
2597 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
2600 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2602 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
2603 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2604 Date: Mon Aug 13 17:22:31 2007 +0200
2606 AVR32: Include <div64.h> instead of <asm/div64.h>
2608 include/asm-avr32/div64.h was recently moved to include/div64.h, but
2609 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
2610 the patch was merged perhaps?)
2612 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
2615 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2617 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
2618 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2619 Date: Wed Jun 27 13:34:26 2007 +0200
2621 atmel_mci: Use 512 byte blocksize if possible
2623 Instead of always using the largest blocksize the card supports, check
2624 if it can support smaller block sizes and use 512 bytes if possible.
2625 Most cards do support this, and other parts of u-boot seem to have
2626 trouble with block sizes different from 512 bytes.
2628 Also enable underrun/overrun protection.
2630 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2631 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
2633 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
2634 Author: Stefan Roese <sr@denx.de>
2635 Date: Mon Aug 13 09:05:33 2007 +0200
2637 ppc4xx: Fix problem in PLL clock calculation
2639 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
2640 and fixes a bug in the PLL clock calculation.
2642 Signed-off-by: Stefan Roese <sr@denx.de>
2644 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
2645 Author: Wolfgang Denk <wd@denx.de>
2646 Date: Sun Aug 12 21:34:50 2007 +0200
2650 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
2651 Author: Wolfgang Denk <wd@denx.de>
2652 Date: Sun Aug 12 21:34:34 2007 +0200
2654 Minor alignment of output, 2nd try.
2655 Also update CHANGELOG
2657 Signed-off-by: Wolfgang Denk <wd@denx.de>
2659 commit 6b309f22a724fad8418e811751a0741b893419cf
2660 Author: Wolfgang Denk <wd@denx.de>
2661 Date: Sun Aug 12 20:35:49 2007 +0200
2663 Minor alignment of output
2665 Signed-off-by: Wolfgang Denk <wd@denx.de>
2667 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
2668 Author: Wolfgang Denk <wd@denx.de>
2669 Date: Sun Aug 12 18:28:18 2007 +0200
2671 Cleanup output on ADS5121 board
2673 Signed-off-by: Wolfgang Denk
2675 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
2676 Author: Wolfgang Denk <wd@denx.de>
2677 Date: Sun Aug 12 15:11:38 2007 +0200
2679 Adapt board configuration and fix kernel crash on MCC200 board.
2681 The update procedure was modified to turn off the USB subsystem
2682 before exit for MCC200 and TRAB. This is necessary as otherwise the
2683 USB controller continues to write periodically to system memory!
2685 MCC200-specific notes:
2686 - the patch disables the magic key check for MCC200
2687 - the patch contains the configuration changes made
2688 for the new revision of the board.
2690 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2691 Signed-off-by: Wolfgang Denk <wd@denx.de>
2693 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
2694 Author: Wolfgang Denk <wd@denx.de>
2695 Date: Sun Aug 12 14:47:54 2007 +0200
2697 Adjust default configuration of ADS5121 board.
2699 Signed-off-by: Wolfgang Denk <wd@denx.de>
2701 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
2702 Author: Wolfgang Denk <wd@denx.de>
2703 Date: Sun Aug 12 14:27:39 2007 +0200
2705 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
2707 Signed-off-by: Wolfgang Denk <wd@denx.de>
2709 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
2710 Author: Gerald Van Baren <vanbaren@cideas.com>
2711 Date: Tue Aug 7 21:14:22 2007 -0400
2713 Improve error print messages.
2715 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2717 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
2718 Author: Kim Phillips <kim.phillips@freescale.com>
2719 Date: Tue Jul 17 13:57:04 2007 -0500
2721 fdt: allow for builds that don't want env and bd_t nodes
2723 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
2726 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2728 commit 91148bf7aeba142d6f348805db7625db7da64d6f
2729 Author: Kim Phillips <kim.phillips@freescale.com>
2730 Date: Tue Jul 17 13:56:53 2007 -0500
2732 fdt: do board setup based on fdt address specified on bootm line
2734 The last fdt patch to bootm did board setup based on the address
2735 specified by a prior fdt address command invocation. The bootm
2736 code, as its call to fdt_chosen does, should use the fdt specified
2737 by the user on the bootm command. Note this restores full
2738 functionality for the 8360's existing default boot environment
2739 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
2740 before booting a kernel).
2742 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2744 commit e125a2ffc209dd34794e326c7175658253beadf3
2745 Author: Gerald Van Baren <vanbaren@cideas.com>
2746 Date: Tue Jul 10 20:40:39 2007 -0400
2748 Call ft_board_setup() from the bootm command.
2750 In the patch titled "Create new fdt boardsetup command..." I removed the
2751 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
2752 to add a direct call back into cmd_bootm.c
2754 This fixes the oversight by adding the direct call to the bootm command.
2756 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2758 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
2759 Author: Gerald Van Baren <vanbaren@cideas.com>
2760 Date: Mon Jun 25 23:25:28 2007 -0400
2762 Create new fdt boardsetup command, fix bug parsing [] form of set values.
2764 Previously ft_board_setup() was called by fdt_chosen() which was not
2765 really correctly structured. This splits ft_board_setup() out by creating
2766 a new fdt boardsetup command.
2768 Fix a bug when parsing fdt set command values which have the square
2769 bracket form [00 11 22 33] - the length was updated incorrectly in when
2772 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2774 commit 6f35ded9e85493595e0eb66a82b502a95326d049
2775 Author: Gerald Van Baren <vanbaren@cideas.com>
2776 Date: Mon Jun 25 20:55:58 2007 -0400
2778 Tighten up the error messages.
2780 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2782 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
2783 Author: Gerald Van Baren <vanbaren@cideas.com>
2784 Date: Mon Jun 25 19:52:23 2007 -0400
2786 Asthetic improvements: error messages and line lengths.
2788 Tighten up the error messages, split overlength lines.
2790 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2792 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
2793 Author: Gerald Van Baren <vanbaren@cideas.com>
2794 Date: Fri May 25 22:08:57 2007 -0400
2796 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
2798 The fdt_chosen() function was adding/seting some properties ad-hoc
2799 improperly and duplicated (poorly) what was done in ft_board_setup()
2801 Clean up long lines (setting properties, printing errors).
2803 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2805 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
2806 Author: Gerald Van Baren <vanbaren@cideas.com>
2807 Date: Mon May 21 23:27:16 2007 -0400
2809 For fdt_find_node_by_path(), handle the root path properly.
2811 Also removes the special case root path detection in cmd_fdt.c since it
2812 is no longer necessary.
2814 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2816 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
2817 Author: Gerald Van Baren <vanbaren@cideas.com>
2818 Date: Thu May 17 23:54:36 2007 -0400
2820 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
2822 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2823 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2825 commit 1a861169bc3758f9de3aead62b058736c6891246
2826 Author: Gerald Van Baren <vanbaren@cideas.com>
2827 Date: Wed Jun 6 22:47:58 2007 -0400
2829 Replace fdt_node_offset() with fdt_find_node_by_path().
2831 The new name matches more closely the kernel's name, which is also
2832 a much better description.
2834 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2835 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2837 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
2838 Author: Gerald Van Baren <vanbaren@cideas.com>
2839 Date: Wed May 16 22:39:59 2007 -0400
2841 Fix cmd_fdt line lengths, refactor code.
2843 Break lines that were greater than 80 characters in length.
2844 Move the fdt print and property parsing code to separate static functions
2845 to reduce coding clutter in the fdt_cmd handling body.
2847 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2849 commit 25114033ab21788810c48ba4df103b649da1223b
2850 Author: Gerald Van Baren <vanbaren@cideas.com>
2851 Date: Sat May 12 09:47:25 2007 -0400
2853 FDT command improvements.
2855 Fix "fdt set" so that it will create a non-existing property.
2856 Add "fdt mknode" to create nodes.
2858 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2860 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
2861 Author: Gerald Van Baren <vanbaren@cideas.com>
2862 Date: Sat May 12 09:45:46 2007 -0400
2864 Reorganize and fix problems (returns) in the bootm command.
2866 Do *NOT* return after the "point of no return" has been passed.
2867 If something goes wrong, the board must be reset after that point.
2868 Move the "Transferring control to Linux" debug message back to where it
2869 belongs: just before transferring control to linux.
2871 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2873 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
2874 Author: Gerald Van Baren <vanbaren@cideas.com>
2875 Date: Tue May 8 21:27:35 2007 -0400
2877 Fix bugs in the CONFIG_OF_LIBFDT
2879 Stupid coding mistakes (identified by Timur Tabi, thanks).
2881 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2883 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
2884 Author: Gerald Van Baren <vanbaren@cideas.com>
2885 Date: Wed Apr 25 22:47:15 2007 -0400
2887 Improve fdt move length handling.
2889 Make the length parameter optional: if not specified, do the move using
2890 the current size unchanged.
2892 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2894 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
2895 Author: Gerald Van Baren <vanbaren@cideas.com>
2896 Date: Wed Apr 25 22:23:36 2007 -0400
2898 Minor code clean up.
2900 Declare the variable fdt properly as extern.
2901 Call the "set_fn" function pointer the "short way" without the full
2902 dereferencing syntax.
2904 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2906 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
2907 Author: Gerald Van Baren <vanbaren@cideas.com>
2908 Date: Wed Apr 25 21:24:27 2007 -0400
2910 Improve error messages, more informative.
2912 Print more than the raw libfdt error message strings. This is especially
2913 useful for cluing in the user when the bootm command aborts due to
2916 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2918 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
2919 Author: Gerald Van Baren <vanbaren@cideas.com>
2920 Date: Fri Apr 20 22:46:53 2007 -0400
2922 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
2924 This is the way u-boot reduces configured-out code. At Wolfgang
2925 Grandegger and Wolfgang Denk's request, make libfdt conform.
2927 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2929 commit 923efd286411ed052d9e074f59f8986d6081061c
2930 Author: Bruce Adler <bruce.adler@ccpu.com>
2931 Date: Fri Aug 10 14:54:47 2007 -0700
2933 add image size and descriptors for Spartan 3E FPGA chips
2935 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
2937 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
2939 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
2940 Author: Kim Phillips <kim.phillips@freescale.com>
2941 Date: Fri Aug 10 15:34:48 2007 -0500
2943 make MAKEALL more immune to merge conflicts
2945 ..by placing board entries one per line, as suggested by jdl.
2947 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2949 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
2950 Author: Kim Phillips <kim.phillips@freescale.com>
2951 Date: Fri Aug 10 13:28:25 2007 -0500
2953 README: Remove outdated cpu type, board type, and NAME_config lists
2955 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2957 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
2958 Author: Dave Liu <r63238@freescale.com>
2959 Date: Fri Aug 10 15:48:59 2007 +0800
2961 mpc83xx: Suppress the warning 'burstlen'
2963 suppress the warning 'burstlen' of spd_sdram.
2965 Signed-off-by: Dave Liu <daveliu@freescale.com>
2967 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
2968 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
2969 Date: Thu Aug 9 15:11:03 2007 -0500
2971 Add support for SBC8641D. Config files.
2973 Add support for Wind River's SBC8641D reference board.
2975 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
2976 Acked-by: Wolfgang Denk <wd@denx.de>
2977 Acked-by: Jon Loeliger <jdl@freescale.com>
2979 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
2980 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
2981 Date: Thu Aug 9 15:10:53 2007 -0500
2983 Add support for SBC8641D. Board files.
2985 Add support for Wind River's SBC8641D reference board.
2987 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
2988 Acked-by: Wolfgang Denk <wd@denx.de>
2989 Acked-by: Jon Loeliger <jdl@freescale.com>
2991 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
2992 Author: Stefan Roese <sr@denx.de>
2993 Date: Fri Aug 10 20:34:58 2007 +0200
2995 Conding style cleanup
2997 Signed-off-by: Stefan Roese <sr@denx.de>
2999 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
3000 Author: Sergey Kubushyn <ksi@koi8.net>
3001 Date: Fri Aug 10 20:26:18 2007 +0200
3003 [ARM] TI DaVinci support, hopefully final
3005 Add support for the following DaVinci boards:
3012 - Split into separate board directories
3013 - Removed changes to MTD_DEBUG (or whatever it's called)
3014 - New CONFIG_CMD party line followed
3015 - Some cosmetic fixes, cleanup etc.
3016 - Patches against the latest U-Boot tree as of now.
3017 - Fixed CONFIG_CMD_NET in net files.
3018 - Fixed CONFIG_CMD_EEPROM for schmoogie.
3019 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
3020 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
3021 but it at least compiles.
3023 Here is an excerpt from session log on SCHMOOGIE...
3025 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
3034 ETH PHY : DP83848 @ 0x01
3036 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
3037 U-Boot > ping 192.168.253.10
3038 host 192.168.253.10 is alive
3041 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
3042 Acked-by: Dirk Behme <dirk.behme@gmail.com>
3043 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
3044 Acked-by: Stefan Roese <sr@denx.de>
3046 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
3047 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3048 Date: Fri Jul 27 01:50:45 2007 -0500
3050 fsl_pci_init cleanup.
3052 Do not enable normal errors created during probe (master abort, perr,
3053 and pcie Invalid Configuration access).
3055 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
3057 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3058 Acked-by: Andy Fleming <afleming@freescale.com>
3060 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
3061 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3062 Date: Fri Jul 27 01:50:44 2007 -0500
3064 pciauto_setup_device bars_num fix
3066 Passing bars_num=0 to pciauto_setup_device should assign no bars.
3068 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3069 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
3070 Acked-by: Andy Fleming <afleming@freescale.com>
3072 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
3073 Author: Jon Loeliger <jdl@freescale.com>
3074 Date: Mon Aug 6 17:39:44 2007 -0500
3076 8641hpcn: Do correct sized pointer math.
3078 When I rebased Ed's patch and cleaned up a few compilation
3079 problems, I apparently rebased my brain on crack first.
3080 Fix that by doing (char *) sized pointer math as needed.
3082 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3084 commit cfc7a7f5bb3273c9951173c788001d45118f141f
3085 Author: Jon Loeliger <jdl@freescale.com>
3086 Date: Thu Aug 2 14:42:20 2007 -0500
3091 Always set PICGCR_MODE.
3092 Enable machine check and provide board config option
3093 to set and handle SoC error interrupts.
3095 Include MSSSR0 in error message.
3097 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
3099 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3100 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3102 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
3103 Author: Stefan Roese <sr@denx.de>
3104 Date: Fri Aug 10 10:42:25 2007 +0200
3106 Coding style cleanup
3108 Signed-off-by: Stefan Roese <sr@denx.de>
3110 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
3111 Author: Dirk Behme <dirk.behme@googlemail.com>
3112 Date: Thu Aug 2 17:42:08 2007 +0200
3114 Make use of generic 64bit division in nand_util.c
3116 Use generic 64bit division in nand_util.c. This makes nand_util.c
3117 independent of any toolchain 64bit division.
3119 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
3121 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
3122 Author: Dirk Behme <dirk.behme@googlemail.com>
3123 Date: Thu Aug 2 17:41:14 2007 +0200
3125 Move 64bit division from avr32 to generic lib
3127 Move the 64bit division from lib_avr32 to lib_generic. With this, all
3128 boards can do_div/__div64_32 if needed, not only avr one. Code is put
3129 to lib_generic, so no larger memory footprint if not used. No code
3130 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
3132 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
3134 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
3135 Author: Niklaus Giger <niklausgiger@gmx.ch>
3136 Date: Fri Jul 27 11:31:22 2007 +0200
3138 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
3140 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3142 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
3143 Author: Niklaus Giger <niklausgiger@gmx.ch>
3144 Date: Fri Jul 27 11:30:33 2007 +0200
3146 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
3148 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3150 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
3151 Author: Niklaus Giger <niklausgiger@gmx.ch>
3152 Date: Fri Jul 27 11:38:26 2007 +0200
3154 Add PPC4xx-HCU4 and HCU5 boards: common files
3156 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3158 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
3159 Author: Niklaus Giger <niklausgiger@gmx.ch>
3160 Date: Fri Jul 27 11:28:44 2007 +0200
3162 Add PPC4xx-HCU4 and HCU5 boards: make related
3164 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3166 commit 137fdd9f474ecb853efdace5200576308c67f18d
3167 Author: Niklaus Giger <niklausgiger@gmx.ch>
3168 Date: Fri Jul 27 11:28:03 2007 +0200
3170 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
3172 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3174 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
3175 Author: Niklaus Giger <niklausgiger@gmx.ch>
3176 Date: Fri Jul 27 11:27:15 2007 +0200
3178 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
3180 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3182 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
3183 Author: Niklaus Giger <niklausgiger@gmx.ch>
3184 Date: Fri Jul 27 11:25:31 2007 +0200
3186 Add PPC4xx-HCU4 and HCU5 boards: READMEs
3188 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3190 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
3191 Author: Niklaus Giger <niklausgiger@gmx.ch>
3192 Date: Fri Jul 27 11:37:40 2007 +0200
3194 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
3196 This series of patches adds support for 2 boards from Netstal Maschinen.
3198 The HCU4 has a PPC405Gpr and
3199 the HCU5 has a PPC440EPX.
3201 The HCU4 has a somehow complicated flash setup, as the booteprom is
3202 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
3205 The HCU5 has only a booteprom as the whole code will be downloaded from a
3206 different board which has HD, CD-ROM, etc and where all code is stored.
3208 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
3211 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3213 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
3214 Author: Stefan Roese <sr@denx.de>
3215 Date: Fri Aug 10 08:42:55 2007 +0200
3217 ppc4xx: Update lwmon5 POST configuration
3219 Signed-off-by: Stefan Roese <sr@denx.de>
3221 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
3222 Author: Yuri Tikhonov <yur@emcraft.com>
3223 Date: Fri Aug 10 08:25:22 2007 +0200
3225 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
3227 The patch adds support for UART POST on ppc44x-based boards with no
3228 external serial clocks installed.
3230 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3231 Acked-by: Stefan Roese <sr@denx.de>
3233 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
3234 Author: Kim Phillips <kim.phillips@freescale.com>
3235 Date: Mon Aug 6 18:18:34 2007 -0500
3237 mpc83xx: fix ITX[GP] O=builddir builds
3239 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
3241 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
3242 "BUILD_DIR=<some dir> ./MAKEALL ..."
3244 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3246 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
3247 Author: Dave Liu <r63238@freescale.com>
3248 Date: Wed Aug 1 15:00:59 2007 +0800
3250 mpc83xx: Correct the README for DDR ECC
3252 Update the README for DDR ECC, change the name
3253 to README.mpc83xx.ddrecc.
3255 Signed-off-by: Dave Liu <daveliu@freescale.com>
3256 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3258 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
3259 Author: Dave Liu <r63238@freescale.com>
3260 Date: Wed Aug 1 15:00:15 2007 +0800
3262 mpc83xx: Consolidate the ECC support of 83xx
3264 Remove the duplicated source code of ecc command on the <board>.c,
3265 for reused, move these code to cpu/mpc83xx directory.
3267 Signed-off-by: Dave Liu <daveliu@freescale.com>
3268 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3270 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
3271 Author: Dave Liu <r63238@freescale.com>
3272 Date: Sat Aug 4 13:37:39 2007 +0800
3274 mpc83xx: Correct the burst length for DDR2 with 32 bits
3276 The burst length should be 4 for DDR2 with 32 bits bus
3278 Signed-off-by: Dave Liu <daveliu@freescale.com>
3280 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
3281 Author: Kim Phillips <kim.phillips@freescale.com>
3282 Date: Wed Jul 25 19:25:33 2007 -0500
3284 mpc83xx: add support for the MPC8323E RDB
3286 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
3287 five 10/100 ethernet ports connected via an ICPlus IP175C
3288 switch, one PCI slot, and serial. Features not supported
3289 in this patch are SD card interface, 2 USB ports, and the
3292 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
3293 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3295 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
3296 Author: Kim Phillips <kim.phillips@freescale.com>
3297 Date: Wed Jul 25 19:25:28 2007 -0500
3299 mpc83xx: fixup generic pci for libfdt
3301 add libfdt support to the generic 83xx pci code
3303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3305 commit f57ac7a7b37109245b69db80839ebee26179966a
3306 Author: Kim Phillips <kim.phillips@freescale.com>
3307 Date: Wed Jul 25 19:25:22 2007 -0500
3309 mpc83xx: fix 8360 and cpu functions to update fdt being passed
3311 ..and not the global fdt. Rename local fdt vars to blob so as not to
3312 be confused with the global var with the same three-letter name.
3314 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3316 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
3317 Author: Jerry Van Baren <gvb.uboot@gmail.com>
3318 Date: Wed Jul 4 21:34:24 2007 -0400
3320 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
3322 Several node strings were not correct (trailing slashes and properties
3324 Added setting of the timebase-frequency.
3325 Improved error messages and use debug() instead of printf().
3327 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3328 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3330 commit 26d02c9bbac1751c5e19294f000100b48d43a920
3331 Author: Jerry Van Baren <gvb.uboot@gmail.com>
3332 Date: Wed Jul 4 21:27:30 2007 -0400
3334 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
3336 The new name matches more closely the kernel's name, which is also
3337 a much better description.
3339 These are the mpc83xx changes made necessary by the function name change.
3341 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
3342 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
3343 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3345 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
3346 Author: Dave Liu <daveliu@freescale.com>
3347 Date: Mon Jun 25 10:41:56 2007 +0800
3349 mpc83xx: Add support for the display of reset status
3351 83xx processor family has many reset sources, such as
3352 power on reset, software hard reset, software soft reset,
3353 JTAG, bus monitor, software watchdog, check stop reset,
3354 external hard reset, external software reset.
3355 sometimes, to figure out the fault of system, we need to
3356 know the cause of reset early before the prompt of
3359 Signed-off-by: Dave Liu <daveliu@freescale.com>
3360 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3362 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
3363 Author: Dave Liu <daveliu@freescale.com>
3364 Date: Mon Jun 25 10:41:04 2007 +0800
3366 mpc83xx: Fix the align bug of SDMA buffer
3368 According to the latest user manual, the SDMA temporary
3369 buffer base address must be 4KB aligned.
3371 Signed-off-by: Dave Liu <daveliu@freescale.com>
3372 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3374 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
3375 Author: Dave Liu <daveliu@freescale.com>
3376 Date: Mon Jun 25 13:21:12 2007 +0800
3378 mpc83xx: Revise the MPC8360EMDS readme doc
3380 When the rev2.x silicon mount on the MPC8360EMDS baord,
3381 and if you are using the u-boot version after the commit
3382 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
3383 to make the ethernet interface usable, we have to setup
3384 the jumpers correctly.
3386 Signed-off-by: Dave Liu <daveliu@freescale.com>
3387 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3389 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
3390 Author: Timur Tabi <timur@freescale.com>
3391 Date: Tue Jul 3 13:46:32 2007 -0500
3393 FSL I2C driver programs the two I2C busses differently
3395 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
3396 The second I2C bus has its slave address programmed incorrectly and is
3397 missing a 5-us delay.
3399 Signed-off-by: Timur Tabi <timur@freescale.com>
3400 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3402 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
3403 Author: Timur Tabi <timur@freescale.com>
3404 Date: Tue Jul 3 13:04:34 2007 -0500
3406 Update SCCR programming in cpu_init_f() to support all 83xx processors
3408 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
3409 bitfields for all 83xx processors. The code to update some bitfields was
3410 compiled only on some processors. Now, the bitfields are programmed as long
3411 as the corresponding CFG_SCCR option is defined in the board header file.
3412 This means that the board header file should not define any CFG_SCCR macros
3413 for bitfields that don't exist on that processor, otherwise the SCCR will be
3414 programmed incorrectly.
3416 Signed-off-by: Timur Tabi <timur@freescale.com>
3417 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3419 commit 9546266999f0b9b51372636614211b88d90f0f25
3420 Author: Martin Krause <martin.krause@tqs.de>
3421 Date: Fri Jun 22 13:04:22 2007 +0200
3423 TQM834x: cleanup configuraton
3425 Remove irritating #undef DEBUG
3427 Signed-off-by: Martin Krause <martin.krause@tqs.de>
3428 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3430 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
3431 Author: david.saada <David.Saada@ecitele.com>
3432 Date: Mon Jun 18 09:09:53 2007 -0700
3434 MPC83xx: Fix makefile to generate config.h file in the build directory
3436 MPC83xx: Fix the Makefile config sections to generate the include/config.h
3437 file in the build directory instead of the source directory.
3439 Signed-off-by: David Saada <david.saada@ecitele.com>
3440 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3442 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
3443 Author: Lee Nipper <Lee.Nipper@freescale.com>
3444 Date: Thu Jun 14 20:07:33 2007 -0500
3446 mpc83xx: Add support for 8360 silicon revision 2.1
3448 This change adds 8360 silicon revision 2.1 support to u-boot.
3450 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
3451 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3453 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
3454 Author: Kumar Gala <galak@kernel.crashing.org>
3455 Date: Wed Aug 8 04:14:28 2007 -0500
3457 Treat ppc64 host as ppc
3459 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3461 commit 0dc4279b08ff82472bec2e2c90858602459febe8
3462 Author: Jason Jin <Jason.jin@freescale.com>
3463 Date: Wed Aug 8 09:01:46 2007 +0800
3465 Minor fix for bios emulator makefile
3467 Add $(obj) to LIB avoiding objects be built in the source dir
3469 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3471 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
3472 Author: Jason Jin <Jason.jin@freescale.com>
3473 Date: Wed Aug 8 08:33:11 2007 +0800
3475 Add CONFIG_BIOSEMU define to guard all the bios emulator code
3477 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3479 This patch fix the compile issue on the board that did not enable the bios emulator
3481 commit ed8106433522f2ea8933e9808346860d061d7731
3482 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
3483 Date: Tue Jul 31 12:27:25 2007 -0500
3485 tsec: fix multiple PHY support
3487 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
3488 broke multiple PHY support in tsec.c. This fixes it.
3490 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
3491 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3493 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
3494 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
3495 Date: Thu Aug 9 09:08:18 2007 -0500
3497 tsec: Allow Ten Bit Interface address to be configurable
3499 Allow the address of the Ten Bit Interface (TBI) to be changed in the
3500 event of a conflict with another device.
3502 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
3504 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
3505 Author: Stefan Roese <sr@denx.de>
3506 Date: Wed Aug 8 09:54:26 2007 +0200
3508 Coding style cleanup
3510 Signed-off-by: Stefan Roese <sr@denx.de>
3512 commit a41de1f0d373e09c782dea558385a06247111ba5
3513 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3514 Date: Sun Aug 5 05:15:18 2007 -0500
3516 Port enabled for I2C signals and chipselects port configuration.
3518 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3520 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
3521 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3522 Date: Sun Aug 5 04:31:18 2007 -0500
3526 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3528 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
3529 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3530 Date: Sun Aug 5 04:11:20 2007 -0500
3534 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3536 commit 99c03c175d2689093176facf17c58ce2cb320001
3537 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3538 Date: Sun Aug 5 03:58:52 2007 -0500
3540 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
3542 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3544 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
3545 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3546 Date: Sun Aug 5 03:55:21 2007 -0500
3548 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
3550 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3552 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
3553 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3554 Date: Sun Aug 5 03:43:30 2007 -0500
3556 Moved sync() from board file to include/asm-m68k/io.h
3558 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3560 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
3561 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3562 Date: Sun Aug 5 03:30:44 2007 -0500
3564 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
3566 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3568 commit 9998bd37ead85e93953559720710d3b0685c81e6
3569 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3570 Date: Sun Aug 5 03:19:10 2007 -0500
3572 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
3574 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3576 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
3577 Author: Jason Jin <Jason.jin@freescale.com>
3578 Date: Tue Aug 7 16:17:06 2007 +0800
3580 Add CONFIG_BIOSEMU define to guard all the bios emulator code
3582 This patch fix the compile issue on the board that did not enable the bios emulator
3584 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
3585 Author: Wolfgang Denk <wd@denx.de>
3586 Date: Tue Aug 7 16:02:13 2007 +0200
3588 Fix missing brace error in fs/fat/fat.c
3589 [pointed out by Roderik Wildenburg]
3591 Signed-off-by: Wolfgang Denk <wd@denx.de>
3593 commit 706714d97a0d08d59eda4de2268c39f504688329
3594 Author: Michal Simek <monstr@monstr.eu>
3595 Date: Mon Aug 6 23:41:53 2007 +0200
3597 [FIX] remove cute code
3599 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
3600 Author: Michal Simek <monstr@monstr.eu>
3601 Date: Mon Aug 6 23:35:26 2007 +0200
3603 [FIX] Fix romfs code
3605 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
3606 Author: Michal Simek <monstr@monstr.eu>
3607 Date: Mon Aug 6 23:31:49 2007 +0200
3609 [FIX] Coding style cleanup - Wolfgang's suggestions
3611 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
3612 Author: Wolfgang Denk <wd@denx.de>
3613 Date: Mon Aug 6 23:21:05 2007 +0200
3615 Fixed typo in README (pointed out by Martin Jost).
3617 Signed-off-by: Wolfgang Denk <wd@denx.de>
3619 commit 537223afa61f64480df31ce440a9cb386df4a814
3620 Author: Stefan Roese <sr@denx.de>
3621 Date: Mon Aug 6 21:10:17 2007 +0200
3623 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
3625 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
3626 here an updated Bamboo README.
3628 Signed-off-by: Stefan Roese <sr@denx.de>
3630 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
3631 Author: Wolfgang Denk <wd@denx.de>
3632 Date: Mon Aug 6 02:17:36 2007 +0200
3634 Coding style cleanup. Update CHANGELOG.
3636 Signed-off-by: Wolfgang Denk <wd@denx.de>
3638 commit 221838cc7eb178370ff62aa05920a582e12ac322
3639 Author: Jason Jin <Jason.jin@freescale.com>
3640 Date: Tue Jul 10 09:03:22 2007 +0800
3642 Remove the bios emulator from MAI board.
3644 The bios emulator in the MAI board can not pass compile
3645 and have a lot of crap in it. remove it and will have a
3646 clean and small bios emulator in the drivers directory
3647 which can be uesed for every board.
3649 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3651 commit 5618332409bb96f4448d1712899369fc80c0b489
3652 Author: Jason Jin <Jason.jin@freescale.com>
3653 Date: Fri Jul 13 12:14:59 2007 +0800
3655 Fix some compile issues for MAI board.
3657 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3659 commit 0f460a1ee148b648ee242c3157650287d4296260
3660 Author: Jason Jin <Jason.jin@freescale.com>
3661 Date: Fri Jul 13 12:14:58 2007 +0800
3663 Configurations for ATI video card BIOS emulator
3665 This patch add definition of the BIOS emulator and the ATI framebuffer
3666 driver for MPC8641HPCN board.
3668 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3669 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3671 commit ece92f85053b8df613edcf05b26a416cbc3d629c
3672 Author: Jason Jin <Jason.jin@freescale.com>
3673 Date: Fri Jul 6 08:34:56 2007 +0800
3675 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
3676 ATI video card BIOS. and can be used for x86 code emulation by some
3679 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3681 commit 5072188acabde3178fac7f5a597150e6e74fd40c
3682 Author: Jason Jin <Jason.jin@freescale.com>
3683 Date: Fri Jul 6 08:33:33 2007 +0800
3685 This is a framebuffer driver for ATI video card, can work for PCI9200,
3686 X300, X700, X800 ATI video cards.
3688 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3689 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3691 commit 5728be389e65fd47f34b33c2596271eb4db751ae
3692 Author: Wolfgang Denk <wd@denx.de>
3693 Date: Mon Aug 6 01:01:49 2007 +0200
3695 Coding style cleanup. Update CHANGELOG.
3697 Signed-off-by: Wolfgang Denk <wd@denx.de>
3699 commit 8092fef4c29b395958bb649647da7e3775731517
3700 Author: Martin Krause <Martin.Krause@tqs.de>
3701 Date: Tue Dec 12 14:26:01 2006 +0100
3703 Add functions to list of exported functions
3705 Additionally export the following fuctions (to make trab_config build again):
3709 Also bump the ABI version to reflect this change
3711 Signed-off-by: Martin Krause <martin.krause@tqs.de>
3713 commit 63cec5814fab5d2b1c86982327433807a5ac0249
3714 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3715 Date: Thu Aug 2 14:09:49 2007 -0500
3717 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
3719 All of the PCI/PCI-Express driver and initialization code that
3720 was in the MPC8641HPCN port has now been moved into the common
3721 drivers/fsl_pci_init.c. In a subsequent patch, this will be
3722 utilized by the 85xx ports as well.
3724 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
3726 Also enable the second PCI-Express controller on 8641
3727 by getting its BATS and CFG_ setup right.
3729 Fixed a u16 vendor compiler warning in AHCI driver too.
3731 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3732 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3733 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3735 commit a274ca4f6d68830e7c916f897561cff8c4101c38
3736 Author: Michal Simek <monstr@monstr.eu>
3737 Date: Sun Aug 5 22:33:05 2007 +0200
3739 [FIX] Coding style cleanup
3741 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
3742 Author: Michal Simek <monstr@monstr.eu>
3743 Date: Sun Aug 5 16:13:31 2007 +0200
3745 [FIX] Xilinx Uartlite driver
3746 Because PPC405 can use UARTLITE serial interface and
3747 Microblaze can use Uart16550 serial interface not only Uartlite.
3749 commit 98889edd50aadf862071eb5664747ad0d568a20e
3750 Author: Michal Simek <monstr@monstr.eu>
3751 Date: Sun Aug 5 15:54:53 2007 +0200
3753 [FIX] Change configuration for XUPV2P Microblaze board
3755 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
3756 Author: Michal Simek <monstr@monstr.eu>
3757 Date: Sun Aug 5 15:53:50 2007 +0200
3759 [PATCH] Added support for Xilinx Emac community driver
3761 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
3762 Author: Bartlomiej Sieka <tur@semihalf.com>
3763 Date: Fri Aug 3 12:08:16 2007 +0200
3765 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
3767 Add the ability for modules from the Schindler cm5200 family to use a
3768 single U-Boot image:
3769 - rename cm1_qp1 to cm5200
3770 - add run-time module detection
3771 - parametrize SDRAM configuration according to the module we are running on
3773 Few minor, board-specific fixes included in this patch:
3774 - better MAC address handling
3775 - updated default environment ('update' command uses +{filesize} now)
3776 - improved error messages in the auto-update code
3777 - allow booting U-Boot from RAM (CFG_RAMBOOT)
3779 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3780 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
3781 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3783 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
3784 Author: Andy Fleming <afleming@freescale.com>
3785 Date: Fri Aug 3 04:05:25 2007 -0500
3787 Add Marvell 1149 PHY support to the TSEC
3789 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
3790 Author: Wolfgang Denk <wd@denx.de>
3791 Date: Thu Aug 2 21:27:46 2007 +0200
3793 Coding style cleanup, update CHANGELOG
3795 Signed-off-by: Wolfgang Denk <wd@denx.de>
3797 commit 63e22764d2f8653f68888c667eb65b3996b52680
3798 Author: Wolfgang Denk <wd@denx.de>
3799 Date: Thu Aug 2 10:11:18 2007 +0200
3801 Minor cleanup of <board>_nand build rules.
3803 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
3804 Author: Stefan Roese <sr@denx.de>
3805 Date: Thu Aug 2 08:33:56 2007 +0200
3807 ppc4xx: Code cleanup
3809 Signed-off-by: Stefan Roese <sr@denx.de>
3811 commit c92409812206ac67a7fa7aae298539a9c3804a46
3812 Author: Grzegorz Bernacki <gjb@semihalf.com>
3813 Date: Tue Jul 31 18:51:48 2007 +0200
3815 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
3817 During config transactions on the PCIe bus an attempt to scan for a
3818 non-existent device can lead to a machine check exception with certain
3819 peripheral devices. In order to avoid crashing in such scenarios the
3820 instrumented versions of the config cycle read routines are introduced, so
3821 the exceptions fixups framework can gracefully recover.
3823 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3824 Acked-by: Rafal Jaworowski <raj@semihalf.com>
3826 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
3827 Author: Rafal Jaworowski <raj@semihalf.com>
3828 Date: Tue Jul 31 18:19:54 2007 +0200
3830 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
3832 This brings back separate settings for PCIe bus numbers depending on chip
3833 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
3834 commit. 440SPe rev. A does NOT work properly with the same settings as for
3835 the rev. B (no devices are seen on the bus during enumeration).
3837 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
3839 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
3840 Author: Wolfgang Denk <wd@denx.de>
3841 Date: Thu Aug 2 00:48:45 2007 +0200
3843 Fix build errors and warnings / code cleanup.
3845 Signed-off-by: Wolfgang Denk <wd@denx.de>
3847 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
3848 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
3849 Date: Tue Jul 31 10:24:56 2007 +0200
3851 ppc4xx: Update AMCC Bamboo 440EP support
3853 Changed storage type of cfg_simulate_spd_eeprom to const
3854 Changed storage type of gpio_tab to stack storage
3855 (Cannot access global data declarations in .bss until afer code relocation)
3857 Improved SDRAM tests to catch problems where data is not uniquely addressable
3858 (e.g. incorrectly programmed SDRAM row or columns)
3860 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
3861 Fixed AM29LV320DT (OpCode Flash) sector map
3863 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
3864 Signed-off-by: Stefan Roese <sr@denx.de>
3866 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
3867 Author: Stefan Roese <sr@denx.de>
3868 Date: Tue Jul 31 08:37:01 2007 +0200
3870 ppc4xx: Update 440EPx lwmon5 board support
3872 - Clear ECC status regs after ECC POST test
3873 - Set dcbz for ECC generation with caches enabled as default
3876 Signed-off-by: Stefan Roese <sr@denx.de>
3878 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
3879 Author: Stefan Roese <sr@denx.de>
3880 Date: Mon Jul 30 11:04:57 2007 +0200
3882 ppc4xx: Only print ECC related info when the error bis are set
3884 Signed-off-by: Stefan Roese <sr@denx.de>
3886 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
3887 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3888 Date: Fri Jul 27 16:44:31 2007 +0200
3890 new FPGA image for PLU405 board
3892 new FPGA image for PLU405 board with improved CompactFlash timing
3894 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3896 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
3897 Author: Rafal Jaworowski <raj@semihalf.com>
3898 Date: Fri Jul 27 14:43:59 2007 +0200
3900 [ADS5121] Support for the ADS5121 board
3902 The following MPC5121e subsystems are supported:
3904 - low-level CPU init
3905 - NOR Boot Flash (common CFI driver)
3911 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3912 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
3913 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
3915 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
3916 Author: Rafal Jaworowski <raj@semihalf.com>
3917 Date: Fri Jul 27 14:22:04 2007 +0200
3919 [PPC] Remove unused MSR_USER definition
3921 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
3923 commit d4024bb72dd81695ec099b2199eda0d27c623e62
3924 Author: John Otken <john@softadvances.com>
3925 Date: Thu Jul 26 17:49:11 2007 +0200
3927 ppc4xx: Add support for AMCC 405EP Taihu board
3929 Signed-off-by: John Otken <john@softadvances.com>
3931 commit b66091de6c7390620312c2501db23d8391e7cabb
3932 Author: Anatolij Gustschin <agust@denx.de>
3933 Date: Thu Jul 26 15:08:01 2007 +0200
3935 ppc4xx: lwmon5: Update Lime initialization
3937 Change Lime SDRAM initialization to now support 100MHz and
3938 133MHz (if enabled). Also the framebuffer is initialized to
3939 display a blue rectangle with a white border.
3941 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3942 Signed-off-by: Stefan Roese <sr@denx.de>
3944 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
3945 Author: Stefan Roese <sr@denx.de>
3946 Date: Tue Jul 24 09:52:52 2007 +0200
3948 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
3950 The used Intel NOR FLASH chips have internally two dies, and are now
3951 treated as two seperate chips.
3953 Signed-off-by: Stefan Roese <sr@denx.de>
3955 commit aedf5bde179ecfbd0a96130d18996a96518b785f
3956 Author: Stefan Roese <sr@denx.de>
3957 Date: Tue Jul 24 07:20:09 2007 +0200
3959 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
3961 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
3962 interrupt controller.
3964 Signed-off-by: Stefan Roese <sr@denx.de>
3966 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
3967 Author: Stefan Roese <sr@denx.de>
3968 Date: Fri Jul 20 15:03:44 2007 +0200
3970 ppc4xx: Fix bug with default GPIO output value
3972 As spotted by Matthias Fuchs, the default output values for all GPIO1
3973 outputs were not setup correctly. This patch fixes this issue.
3975 Signed-off-by: Stefan Roese <sr@denx.de>
3977 commit 531e3e8b831f357056448fa573137d5fb37000fd
3978 Author: Pavel Kolesnikov <concord@emcraft.com>
3979 Date: Fri Jul 20 15:03:03 2007 +0200
3981 POST: Add ECC POST for the lwmon5 board
3983 This patch adds ECC Post test for the Lwmon5 board based
3984 on PPC440EPx to U-Boot.
3986 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
3987 Acked-by: Yuri Tikhonov <yur@emcraft.com>
3988 Acked-by: Stefan Roese <sr@denx.de>
3990 commit cc3023b9f95d7ac959a764471a65001062aecf41
3991 Author: Rafal Jaworowski <raj@semihalf.com>
3992 Date: Thu Jul 19 17:12:28 2007 +0200
3994 Fix breakage of 8xx boards from recent commit.
3996 This patch fixes the negative consequences for 8xx of the recent
3997 "ppc4xx: Clean up 440 exceptions handling" commit.
3999 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
4001 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
4002 Author: Stefan Roese <sr@denx.de>
4003 Date: Mon Jul 16 13:11:12 2007 +0200
4005 Coding style cleanup
4007 Signed-off-by: Stefan Roese <sr@denx.de>
4009 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
4010 Author: Stefan Roese <sr@denx.de>
4011 Date: Mon Jul 16 10:02:12 2007 +0200
4013 ppc4xx: Code cleanup
4015 Signed-off-by: Stefan Roese <sr@denx.de>
4017 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
4018 Author: Stefan Roese <sr@denx.de>
4019 Date: Mon Jul 16 10:01:38 2007 +0200
4021 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
4023 Signed-off-by: Stefan Roese <sr@denx.de>
4025 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
4026 Author: Stefan Roese <sr@denx.de>
4027 Date: Mon Jul 16 10:00:43 2007 +0200
4029 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
4031 The new boardspecific DDR2 controller configuration is used for the Yucca
4032 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
4034 Signed-off-by: Stefan Roese <sr@denx.de>
4036 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
4037 Author: Stefan Roese <sr@denx.de>
4038 Date: Mon Jul 16 09:57:00 2007 +0200
4040 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
4042 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
4043 support non default, boardspecific DDR(2) controller configuration.
4045 Signed-off-by: Stefan Roese <sr@denx.de>
4047 commit 5743a9207a370b90f09b20ebd61167c806b937f3
4048 Author: Stefan Roese <sr@denx.de>
4049 Date: Mon Jul 16 08:53:51 2007 +0200
4051 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
4053 The new function remove_tlb() can be used to remove the TLB's used to
4054 map a specific memory region. This is especially useful for the DDR(2)
4055 setup routines which configure the SDRAM area temporarily as a cached
4056 area (for speedup on auto-calibration and ECC generation) and later
4057 need this area uncached for normal usage.
4059 Signed-off-by: Stefan Roese <sr@denx.de>
4061 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
4062 Author: Michal Simek <monstr@monstr.eu>
4063 Date: Mon Jul 16 00:31:07 2007 +0200
4065 [PATCH] Support for Xilinx EmacLite controller
4067 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
4068 Author: Wolfgang Denk <wd@denx.de>
4069 Date: Sat Jul 14 22:51:02 2007 +0200
4073 Signed-off-by: Wolfgang Denk <wd@denx.de>
4075 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
4076 Author: Michal Simek <monstr@monstr.eu>
4077 Date: Sat Jul 14 13:11:28 2007 +0200
4079 [FIX] support for simply measuring time
4081 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
4082 Author: Michal Simek <monstr@monstr.eu>
4083 Date: Sat Jul 14 12:41:23 2007 +0200
4085 [FS] Added support for ROMFS
4087 commit 011595307731a7a67a7445d107c279d031e8ab97
4088 Author: Heiko Schocher <hs@pollux.denx.de>
4089 Date: Sat Jul 14 01:06:58 2007 +0200
4091 [PCS440EP] - fix compile error, if BUILD_DIR is used
4093 commit 5a2f1098d81ad58b309e5e558d0492643166a799
4094 Author: Michal Simek <monstr@monstr.eu>
4095 Date: Sat Jul 14 00:18:48 2007 +0200
4097 [PATCH] Support time without timer
4099 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
4100 Author: Michal Simek <monstr@monstr.eu>
4101 Date: Fri Jul 13 21:43:55 2007 +0200
4103 [PATCH] Remove problem with disabled BARREL SHIFTER
4105 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
4106 Author: Michal Simek <monstr@monstr.eu>
4107 Date: Fri Jul 13 21:41:44 2007 +0200
4109 [FIX] correct help for rspr
4111 commit fad63407154f46246ce80d53a9c669a44362ac67
4112 Author: Heiko Schocher <hs@pollux.denx.de>
4113 Date: Fri Jul 13 09:54:17 2007 +0200
4115 make show_boot_progress () weak.
4117 Signed-off-by: Heiko Schocher <hs@denx.de>
4119 commit 907902472391b6ca1876ec300687562ecaf459b1
4120 Author: Heiko Schocher <hs@pollux.denx.de>
4121 Date: Fri Jul 13 08:26:05 2007 +0200
4123 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
4124 - fix compile error, if BUILD_DIR is used
4126 Signed-off-by: Heiko Schocher <hs@denx.de>
4128 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
4129 Author: Stefan Roese <sr@denx.de>
4130 Date: Thu Jul 12 16:32:08 2007 +0200
4132 ppc4xx: Change receive buffer handling in the 4xx emac driver
4134 This change fixes a bug in the receive buffer handling, that
4135 could lead to problems upon high network traffic (broadcasts...).
4137 Signed-off-by: Stefan Roese <sr@denx.de>
4139 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
4140 Author: Wolfgang Denk <wd@denx.de>
4141 Date: Thu Jul 12 01:45:34 2007 +0200
4143 Update CHANGELOG, minor coding style cleanup.
4145 Signed-off-by: Wolfgang Denk <wd@denx.de>
4147 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
4148 Author: Andy Fleming <afleming@freescale.com>
4149 Date: Fri Jun 8 16:41:18 2007 -0500
4151 Remove erroneous errata code from Marvel 88E1111S driver
4153 The Marvel 88E1111S driver for the TSEC was copied from the
4154 88E1101 driver, and included a fix for an erratum which does not
4155 exist on that part. Now it is removed
4157 Signed-off-by: Andy Fleming <afleming@freescale.com>
4159 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
4160 Author: Andy Fleming <afleming@freescale.com>
4161 Date: Tue Jun 5 16:38:44 2007 -0500
4163 From: eran liberty <eran.liberty@gmail.com>
4165 adds the reset register to 85xx immap
4167 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
4168 Signed-off-by: Andy Fleming <afleming@freescale.com>
4170 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
4171 Author: Andy Fleming <afleming@freescale.com>
4172 Date: Thu May 10 17:50:01 2007 -0500
4174 Polished the 85xx ADS config files
4176 Made the boot commands use device trees by default.
4177 Also moved the ramdisk to 1000000 (I think the previous address
4178 was getting overridden during boot).
4180 Signed-off-by: Andy Fleming <afleming@freescale.com>
4182 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
4183 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4184 Date: Wed May 9 11:03:32 2007 -0500
4186 8544ds: Fix Makefile after moving pixis to board/freescale.
4188 The OBJTREE != SRCTREE build scenario was broken.
4191 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4192 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4194 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
4195 Author: Andy Fleming <afleming@freescale.com>
4196 Date: Wed May 9 00:54:20 2007 -0500
4198 tsec: Fix PHY code to match first driver
4200 Jarrold Wen noticed that the generic PHY code always matches
4201 under the current implementation. Change it so the first match
4202 wins, and *only* unknown PHYs trigger the generic driver
4204 Signed-off-by: Andy Fleming <afleming@freescale.com>
4206 commit ccc091aac61a38cd998d575d92f7232e256d6312
4207 Author: Andy Fleming <afleming@freescale.com>
4208 Date: Tue May 8 17:27:43 2007 -0500
4210 Add support for CPM device tree configuration to 8560 ADS
4212 * Adds code to modify CPM frequencies
4213 * Cleans up the config file to #define TSEC and (for now) #undef FCC
4214 * Adds the MII command for all 8560 ADS configurations
4215 * Updates config file to provide convenience commands for booting
4218 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
4219 Signed-off-by: Andy Fleming <afleming@freescale.com>
4221 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
4222 Author: Andy Fleming <afleming@freescale.com>
4223 Date: Tue May 8 17:23:02 2007 -0500
4225 Fix Marvell 88e1145 PHY init code
4227 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
4228 where the reset was being done after the errata code instead of
4231 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
4232 Signed-off-by: Andy Fleming <afleming@freescale.com>
4234 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
4235 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4236 Date: Wed Jul 11 14:52:16 2007 -0500
4238 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
4240 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4242 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
4243 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4244 Date: Wed Jul 11 14:52:08 2007 -0500
4246 pciauto setup bridge
4248 The P2P bridge bus numbers programmed into the device are relative to
4251 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4253 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
4254 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4255 Date: Wed Jul 11 14:52:01 2007 -0500
4257 Support PCIe extended config registers
4259 FSL PCIe block has extended cfg registers in the 100 and 400 range.
4260 For example, to read the LTSSM register: pci display <busn>.0 404 1
4262 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4264 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
4265 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4266 Date: Wed Jul 11 14:51:48 2007 -0500
4268 Minor improvements to drivers/pci_auto.c
4270 - Make pciauto_{pre,post}scan_setup_bridge non-static
4271 - Added physical address display in debug messages.
4273 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4275 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
4276 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4277 Date: Wed Jul 11 14:51:35 2007 -0500
4279 Start pci hose scan from hose->current_busno.
4281 Ensure hose->current_busno is not less than first_busno. This fixes
4282 broken board code which leaves current_busno=0 when first_busno is
4283 greater than 0 for the cases with multiple controllers.
4285 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4287 commit 3865b1fb7843a08ad49a6319a36415752276ff48
4288 Author: Stefan Roese <sr@denx.de>
4289 Date: Wed Jul 11 12:13:53 2007 +0200
4291 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
4293 Signed-off-by: Stefan Roese <sr@denx.de>
4295 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
4296 Author: Bartlomiej Sieka <tur@semihalf.com>
4297 Date: Wed Jul 11 20:11:07 2007 +0200
4299 CM1.QP1: Support for the Schindler CM1.QP1 board.
4301 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
4302 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4304 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
4305 Author: Heiko Schocher <hs@pollux.denx.de>
4306 Date: Wed Jul 11 18:39:11 2007 +0200
4308 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
4309 - now the Flash ST M29W040B is supported (not tested)
4310 - fix the "led" command
4311 - fix compile error, if BUILD_DIR is used
4313 Signed-off-by: Heiko Schocher <hs@denx.de>
4315 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
4316 Author: Stefan Roese <sr@denx.de>
4317 Date: Sun Jul 8 13:44:27 2007 +0200
4319 Fix malloc problem introduced with the relocation fixup for the PPC platform
4321 The relocation fixup didn't handle the malloc pointer initialization
4322 correctly. This patch fixes this problem. Tested successfully on 4xx.
4323 The relocation fixup patches for 4xx will follow soon.
4325 Signed-off-by: Stefan Roese <sr@denx.de>
4327 commit 0dca874db62718e41253659e60f3a1de7eb418ce
4328 Author: TsiChung <tcliew@Goku.(none)>
4329 Date: Tue Jul 10 15:45:43 2007 -0500
4331 Cache update and added CFG_UNIFY_CACHE
4333 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
4335 Signed-off-by: TsiChung <tcliew@Goku.(none)>
4337 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
4338 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4339 Date: Thu Jul 5 23:36:16 2007 -0500
4341 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
4343 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
4345 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4347 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
4348 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4349 Date: Thu Jul 5 23:31:25 2007 -0500
4353 Include immap.h and renamed mcfrtc.h to rtc.h
4355 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4357 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
4358 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4359 Date: Thu Jul 5 23:29:21 2007 -0500
4361 Add mcffec_initialize()
4363 Added mcffec_initialize() in eth_initialize()
4365 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4367 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
4368 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4369 Date: Thu Jul 5 23:27:40 2007 -0500
4371 Update header file and clean up
4375 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4377 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
4378 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4379 Date: Thu Jul 5 23:23:15 2007 -0500
4381 New uart structure and defines
4383 Seperated from mcfuart.h
4385 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4387 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
4388 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4389 Date: Thu Jul 5 23:22:31 2007 -0500
4391 New timer structure and defines
4393 Seperated from mcftimer.h
4395 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4397 commit e04acb2eba4782489417240eff76e20e176aec10
4398 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4399 Date: Thu Jul 5 23:21:09 2007 -0500
4401 Rename mcfrtc to rtc
4403 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
4405 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4407 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
4408 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4409 Date: Thu Jul 5 23:17:36 2007 -0500
4411 Rename mcfserial.c. Update include header
4413 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
4415 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4417 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
4418 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4419 Date: Thu Jul 5 23:13:58 2007 -0500
4421 Header file update, clean up and cache handling
4423 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
4425 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4427 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
4428 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4429 Date: Thu Jul 5 23:10:40 2007 -0500
4431 Create interrupts.c and modify Makefile
4433 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
4435 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4437 commit ddd104f1ed655eda50c06ba636237a83ed943f34
4438 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4439 Date: Thu Jul 5 23:06:55 2007 -0500
4443 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4445 commit b9bf3de377b2bae70c983c9b97feae914999e735
4446 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4447 Date: Thu Jul 5 23:05:31 2007 -0500
4449 Update header file and some clean up
4451 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
4453 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4455 commit 84a015b52ec820a5ae173717d78516de731c89c2
4456 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4457 Date: Thu Jul 5 23:03:28 2007 -0500
4459 Update header file and enable icache
4461 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
4463 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4465 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
4466 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4467 Date: Thu Jul 5 23:01:22 2007 -0500
4469 Update header file and removed interrupt_init()
4471 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
4473 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4475 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
4476 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4477 Date: Thu Jul 5 22:57:46 2007 -0500
4479 Update for flash.o and mii.o
4481 Removed flash.o and added mii.o
4483 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4485 commit c5ded275d839e4ff79f41718d50a835d989f57bc
4486 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4487 Date: Thu Jul 5 22:56:19 2007 -0500
4489 MII functions calls.
4491 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4493 commit 427c814104560e29bda14955c67703245aaaa5b4
4494 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4495 Date: Thu Jul 5 22:54:42 2007 -0500
4497 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
4499 The removed MII routines will be placed in mii.c.
4501 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4503 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
4504 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4505 Date: Thu Jul 5 22:51:05 2007 -0500
4509 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
4511 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4513 commit 2744354a8437b8f78db178e30660215688bff570
4514 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4515 Date: Thu Jul 5 22:46:38 2007 -0500
4517 Seperate old structure defines and new structure defines
4519 Removed new uart structure and defines to uart.h
4521 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4523 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
4524 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4525 Date: Thu Jul 5 22:45:01 2007 -0500
4527 Seperate old structure defines and new structure defines
4529 New timer structure and defines will move to new timer.h
4531 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4533 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
4534 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4535 Date: Thu Jul 5 22:42:23 2007 -0500
4541 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4543 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
4544 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4545 Date: Thu Jul 5 22:41:24 2007 -0500
4549 Replaced whitespace with tabs
4551 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4553 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
4554 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4555 Date: Thu Jul 5 22:39:07 2007 -0500
4557 Create new header file and move peripherals base address from configs file to new header file.
4559 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
4561 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4563 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
4564 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4565 Date: Thu Jul 5 22:24:58 2007 -0500
4569 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
4571 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
4573 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
4574 Author: Jon Loeliger <jdl@freescale.com>
4575 Date: Tue Jul 10 11:19:50 2007 -0500
4577 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
4579 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4580 Those always evaluated TRUE, and thus were always compiled
4581 even when IDE really wasn't defined/wanted.
4583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4585 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
4586 Author: Jon Loeliger <jdl@freescale.com>
4587 Date: Tue Jul 10 11:13:21 2007 -0500
4589 drivers/: Remove lingering references to CFG_CMD_* symbols.
4591 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4592 Those always evaluated TRUE, and thus were always compiled
4593 even when IDE really wasn't defined/wanted.
4595 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4597 commit f40a7f3e3888b42a43674b099e5470022c8c544c
4598 Author: Jon Loeliger <jdl@freescale.com>
4599 Date: Tue Jul 10 11:07:56 2007 -0500
4601 fs/: Remove lingering references to CFG_CMD_* symbols.
4603 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4604 Those always evaluated TRUE, and thus were always compiled
4605 even when IDE really wasn't defined/wanted.
4607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4609 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
4610 Author: Jon Loeliger <jdl@freescale.com>
4611 Date: Tue Jul 10 11:05:02 2007 -0500
4613 net/: Remove lingering references to CFG_CMD_* symbols.
4615 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4616 Those always evaluated TRUE, and thus were always compiled
4617 even when IDE really wasn't defined/wanted.
4619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4621 commit 902531788376046da212afd1661cffb62f3daa1c
4622 Author: Jon Loeliger <jdl@freescale.com>
4623 Date: Tue Jul 10 11:02:44 2007 -0500
4625 common/: Remove lingering references to CFG_CMD_* symbols.
4627 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4628 Those always evaluated TRUE, and thus were always compiled
4629 even when IDE really wasn't defined/wanted.
4631 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4633 commit d39b57415838c73fb0a37eca84de3c68ba990586
4634 Author: Jon Loeliger <jdl@freescale.com>
4635 Date: Tue Jul 10 10:48:22 2007 -0500
4637 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
4639 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4640 Those always evaluated TRUE, and thus were always compiled
4641 even when IDE really wasn't defined/wanted.
4643 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4645 commit 77a318545d57aefa844752465b94c7e09a3f26d0
4646 Author: Jon Loeliger <jdl@freescale.com>
4647 Date: Tue Jul 10 10:39:10 2007 -0500
4649 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
4651 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
4652 Those always evaluated TRUE, and thus were always compiled
4653 even when IDE really wasn't defined/wanted.
4655 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4657 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
4658 Author: Jon Loeliger <jdl@freescale.com>
4659 Date: Tue Jul 10 10:27:39 2007 -0500
4661 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
4663 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4665 commit 079a136c3588814784561d6e4856970ee82d6e2a
4666 Author: Jon Loeliger <jdl@freescale.com>
4667 Date: Tue Jul 10 10:12:10 2007 -0500
4669 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
4671 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
4672 used to be included but CONFIG_BOOTP_MASK was not defined.
4674 Remove lingering references to CFG_CMD_* symbols.
4676 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4678 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
4679 Author: Jon Loeliger <jdl@freescale.com>
4680 Date: Tue Jul 10 09:38:02 2007 -0500
4682 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
4684 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
4685 used to be included but CONFIG_BOOTP_MASK was not defined.
4687 Remove lingering references to CFG_CMD_* symbols.
4689 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4691 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
4692 Author: Jon Loeliger <jdl@freescale.com>
4693 Date: Tue Jul 10 09:29:01 2007 -0500
4695 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
4697 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
4698 used to be included but CONFIG_BOOTP_MASK was not defined.
4700 Remove lingering references to CFG_CMD_* symbols.
4702 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4704 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
4705 Author: Jon Loeliger <jdl@freescale.com>
4706 Date: Tue Jul 10 09:22:23 2007 -0500
4708 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
4710 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
4711 used to be included but CONFIG_BOOTP_MASK was not defined.
4713 Remove lingering references to CFG_CMD_* symbols.
4715 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4717 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
4718 Author: Jon Loeliger <jdl@freescale.com>
4719 Date: Tue Jul 10 09:10:49 2007 -0500
4721 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
4723 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
4724 used to be included but CONFIG_BOOTP_MASK was not defined.
4726 Remove lingering references to CFG_CMD_* symbols.
4728 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4730 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
4731 Author: Jon Loeliger <jdl@freescale.com>
4732 Date: Tue Jul 10 09:02:57 2007 -0500
4734 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
4736 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
4737 used to be included but CONFIG_BOOTP_MASK was not defined.
4739 Remove lingering references to CFG_CMD_* symbols.
4741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4743 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
4744 Author: Jon Loeliger <jdl@freescale.com>
4745 Date: Mon Jul 9 22:08:34 2007 -0500
4747 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
4749 All of the choices for CONFIG_BOOTP_ are now documented in
4750 the README file. You must now individually select exactly
4751 the set that you want using a series of
4752 #define CONFIG_BOOTP_<x>
4753 statements in the board port config files now.
4755 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4757 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
4758 Author: Jon Loeliger <jdl@freescale.com>
4759 Date: Mon Jul 9 21:57:31 2007 -0500
4761 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
4763 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4765 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
4766 Author: Jon Loeliger <jdl@freescale.com>
4767 Date: Mon Jul 9 21:48:26 2007 -0500
4769 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
4771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4773 commit 37d4bb70586659dedef1658ce1bed071be098aec
4774 Author: Jon Loeliger <jdl@freescale.com>
4775 Date: Mon Jul 9 21:38:02 2007 -0500
4777 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
4779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4781 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
4782 Author: Jon Loeliger <jdl@freescale.com>
4783 Date: Mon Jul 9 21:31:24 2007 -0500
4785 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
4787 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4789 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
4790 Author: Jon Loeliger <jdl@freescale.com>
4791 Date: Mon Jul 9 21:24:19 2007 -0500
4793 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
4795 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4797 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
4798 Author: Jon Loeliger <jdl@freescale.com>
4799 Date: Mon Jul 9 21:16:53 2007 -0500
4801 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
4803 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4805 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
4806 Author: Jon Loeliger <jdl@freescale.com>
4807 Date: Mon Jul 9 19:12:30 2007 -0500
4809 Retire CONFIG_COMMANDS finally.
4810 Strip old CFG_CMD_* symbols out.
4812 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4814 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
4815 Author: Jon Loeliger <jdl@freescale.com>
4816 Date: Mon Jul 9 19:10:03 2007 -0500
4818 Update README.* to reference new CONFIG_CMD_* names now.
4820 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4822 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
4823 Author: Jon Loeliger <jdl@freescale.com>
4824 Date: Mon Jul 9 19:06:00 2007 -0500
4826 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
4828 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4830 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
4831 Author: Jon Loeliger <jdl@freescale.com>
4832 Date: Mon Jul 9 18:57:22 2007 -0500
4834 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
4836 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4838 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
4839 Author: Jon Loeliger <jdl@freescale.com>
4840 Date: Mon Jul 9 18:45:16 2007 -0500
4842 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
4844 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4846 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
4847 Author: Jon Loeliger <jdl@freescale.com>
4848 Date: Mon Jul 9 18:38:39 2007 -0500
4850 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
4852 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4854 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
4855 Author: Jon Loeliger <jdl@freescale.com>
4856 Date: Mon Jul 9 18:31:28 2007 -0500
4858 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
4860 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4862 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
4863 Author: Jon Loeliger <jdl@freescale.com>
4864 Date: Mon Jul 9 18:24:55 2007 -0500
4866 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
4868 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4870 commit fcec2eb93e126400009729328e797f12bc94f1fd
4871 Author: Jon Loeliger <jdl@freescale.com>
4872 Date: Mon Jul 9 18:19:09 2007 -0500
4874 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
4876 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4878 commit a593814f2be0c9cdc3133cd550b167b8a988328f
4879 Author: Jon Loeliger <jdl@freescale.com>
4880 Date: Mon Jul 9 18:10:50 2007 -0500
4882 rtc/: Remove obsolete references to CONFIG_COMMANDS
4884 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4886 commit 67350568f9d46e66c21829f3513b3db0caeb948b
4887 Author: Jon Loeliger <jdl@freescale.com>
4888 Date: Mon Jul 9 18:05:38 2007 -0500
4890 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
4892 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4894 commit 7def6b34f910f08d7ef0a14646da067719237ca2
4895 Author: Jon Loeliger <jdl@freescale.com>
4896 Date: Mon Jul 9 18:02:11 2007 -0500
4898 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
4900 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4902 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
4903 Author: Jon Loeliger <jdl@freescale.com>
4904 Date: Mon Jul 9 17:56:50 2007 -0500
4906 fs/: Remove obsolete references to CONFIG_COMMANDS
4908 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4910 commit c91898bbc505aff3e12a807af88e76da18efb7ee
4911 Author: Jon Loeliger <jdl@freescale.com>
4912 Date: Mon Jul 9 17:46:09 2007 -0500
4914 tools/: Remove obsolete references to CONFIG_COMMANDS
4916 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4918 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
4919 Author: Jon Loeliger <jdl@freescale.com>
4920 Date: Mon Jul 9 17:45:14 2007 -0500
4922 net/: Remove obsolete references to CONFIG_COMMANDS
4924 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4926 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
4927 Author: Jon Loeliger <jdl@freescale.com>
4928 Date: Mon Jul 9 17:39:42 2007 -0500
4930 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
4932 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4934 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
4935 Author: Jon Loeliger <jdl@freescale.com>
4936 Date: Mon Jul 9 17:30:01 2007 -0500
4938 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
4940 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4942 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
4943 Author: Jon Loeliger <jdl@freescale.com>
4944 Date: Mon Jul 9 17:22:37 2007 -0500
4946 disk/: Remove obsolete references to CONFIG_COMMANDS
4948 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4950 commit 639221c76c88215bd55af83ad174fc30d1940f8f
4951 Author: Jon Loeliger <jdl@freescale.com>
4952 Date: Mon Jul 9 17:15:49 2007 -0500
4954 include/: Remove obsolete references to CONFIG_COMMANDS
4955 Mostly removed from comments here.
4957 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4959 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
4960 Author: Wolfgang Denk <wd@denx.de>
4961 Date: Tue Jul 10 00:01:28 2007 +0200
4963 Coding style cleanup; update CHANGELOG.
4965 Signed-off-by: Wolfgang Denk <wd@denx.de>
4967 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
4968 Author: Stefan Roese <sr@denx.de>
4969 Date: Mon Jul 9 11:00:24 2007 +0200
4971 Small coding style cleanup
4973 Signed-off-by: Stefan Roese <sr@denx.de>
4975 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
4976 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4977 Date: Mon Jul 9 10:10:08 2007 +0200
4979 Migrate esd 405EP boards to new NAND subsystem
4981 Remove unused CFG_NAND_LEGACY define
4983 These boards to not have NAND.
4985 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4987 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
4988 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4989 Date: Mon Jul 9 10:10:06 2007 +0200
4991 Migrate esd 405EP boards to new NAND subsystem
4993 Migrate esd 405EP boards to new NAND subsystem
4996 -use correct io accessors (in/out_be32())
4998 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5000 commit e09f7ab5749c345f924da272bea0521a73af5b11
5001 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5002 Date: Mon Jul 9 10:10:04 2007 +0200
5004 Migrate esd 405EP boards to new NAND subsystem
5006 This patch prepares the migration from the legacy NAND driver
5007 to U-Boot's new NAND subsystem for esd boards.
5009 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5011 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
5012 Author: Jon Loeliger <jdl@freescale.com>
5013 Date: Sun Jul 8 18:10:08 2007 -0500
5015 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
5017 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5019 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
5020 Author: Jon Loeliger <jdl@freescale.com>
5021 Date: Sun Jul 8 18:05:39 2007 -0500
5023 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
5025 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5027 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
5028 Author: Jon Loeliger <jdl@freescale.com>
5029 Date: Sun Jul 8 18:02:23 2007 -0500
5031 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
5033 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5035 commit baa26db4113679b80970ff447d91cc10217742a6
5036 Author: Jon Loeliger <jdl@freescale.com>
5037 Date: Sun Jul 8 17:51:39 2007 -0500
5039 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
5041 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5043 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
5044 Author: Jon Loeliger <jdl@freescale.com>
5045 Date: Sun Jul 8 17:02:01 2007 -0500
5047 Clear up confusion over the CMD_POST and POST_DIAG mess.
5049 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
5050 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
5051 Clear this mess up some.
5053 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5055 commit b3631487105a57ab7cbadfc26efbaf9676275018
5056 Author: Jon Loeliger <jdl@freescale.com>
5057 Date: Sun Jul 8 15:45:08 2007 -0500
5059 Remove references to the old cmd_confdefs.h include file.
5061 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5063 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
5064 Author: Jon Loeliger <jdl@freescale.com>
5065 Date: Sun Jul 8 15:42:59 2007 -0500
5067 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
5069 Use new CONFIG_CMD_* in lwmon5.h board config file.
5070 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
5072 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5074 commit a5562901661bd428f7e5feb333f796372cb81019
5075 Author: Jon Loeliger <jdl@freescale.com>
5076 Date: Sun Jul 8 15:31:57 2007 -0500
5078 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
5080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5082 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
5083 Author: Jon Loeliger <jdl@freescale.com>
5084 Date: Sun Jul 8 15:02:44 2007 -0500
5086 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
5088 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5090 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
5091 Author: Jon Loeliger <jdl@freescale.com>
5092 Date: Sun Jul 8 15:12:40 2007 -0500
5094 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
5096 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5098 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
5099 Author: Jon Loeliger <jdl@freescale.com>
5100 Date: Sun Jul 8 14:55:07 2007 -0500
5102 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
5104 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5106 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
5107 Author: Jon Loeliger <jdl@freescale.com>
5108 Date: Sun Jul 8 14:49:44 2007 -0500
5110 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
5112 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5114 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
5115 Author: Jon Loeliger <jdl@freescale.com>
5116 Date: Sun Jul 8 14:21:43 2007 -0500
5118 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
5120 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5122 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
5123 Author: Jon Loeliger <jdl@freescale.com>
5124 Date: Sun Jul 8 14:14:17 2007 -0500
5126 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
5128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5130 commit 348f258f24253433e4a2302a0bbceb6740a67246
5131 Author: Jon Loeliger <jdl@freescale.com>
5132 Date: Sun Jul 8 13:46:18 2007 -0500
5134 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
5136 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5138 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
5139 Author: Jon Loeliger <jdl@freescale.com>
5140 Date: Sun Jul 8 10:09:35 2007 -0500
5142 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
5144 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5146 commit 60a0876b5106b34220e459c208bbf648073306c0
5147 Author: Jon Loeliger <jdl@freescale.com>
5148 Date: Sat Jul 7 21:04:26 2007 -0500
5150 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
5152 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5154 commit dcaa71562826a2466e894c868d132509dcda8444
5155 Author: Jon Loeliger <jdl@freescale.com>
5156 Date: Sat Jul 7 20:56:05 2007 -0500
5158 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
5160 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5162 commit 3c3227f3c737502311b25b72084573901cbbf17d
5163 Author: Jon Loeliger <jdl@freescale.com>
5164 Date: Sat Jul 7 20:40:43 2007 -0500
5166 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
5168 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5170 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
5171 Author: Jon Loeliger <jdl@freescale.com>
5172 Date: Thu Jul 5 19:52:35 2007 -0500
5174 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
5176 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5178 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
5179 Author: Jon Loeliger <jdl@freescale.com>
5180 Date: Thu Jul 5 19:32:07 2007 -0500
5182 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
5184 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5186 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
5187 Author: Jon Loeliger <jdl@freescale.com>
5188 Date: Thu Jul 5 19:13:52 2007 -0500
5190 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
5192 Since ADS860.h includes "board/fads/fads.h" with ramifications
5193 on the CONFIG_COMMAND treatment, it too has to be adjusted to
5194 exclude already configured commands in this same commit.
5196 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5198 commit 10e038932f22ee80ebd53de312531e70e6590a2f
5199 Author: Thomas Knobloch <knobloch@siemens.com>
5200 Date: Fri Jul 6 14:58:39 2007 +0200
5202 [NAND] Bad block skipping for command nboot
5204 The old implementation of command nboot does not support reading the image from
5205 NAND flash with skipping of bad blocks. The patch implements a new version of
5206 the nboot command: by calling nboot.jffs2 from the u-boot command line the
5207 command will load the image from NAND flash with respect to bad blocks (by using
5208 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
5211 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
5212 Signed-off-by: Stefan Roese <sr@denx.de>
5214 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
5215 Author: Stefan Roese <sr@denx.de>
5216 Date: Fri Jul 6 12:26:51 2007 +0200
5218 ppc4xx: Update lwmon5 default environment
5220 Signed-off-by: Stefan Roese <sr@denx.de>
5222 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
5223 Author: Stefan Roese <sr@denx.de>
5224 Date: Fri Jul 6 11:48:24 2007 +0200
5226 ppc4xx: Update lwmon5 board
5228 Add unlock=yes environment variable to default variables to unlock
5229 the CFI flash by default.
5231 Signed-off-by: Stefan Roese <sr@denx.de>
5233 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
5234 Author: Stefan Roese <sr@denx.de>
5235 Date: Fri Jul 6 09:45:47 2007 +0200
5237 Fix problem with get/setdcr commands introduced by cfg patches
5239 Signed-off-by: Stefan Roese <sr@denx.de>
5241 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
5242 Author: Wolfgang Denk <wd@denx.de>
5243 Date: Fri Jul 6 02:50:19 2007 +0200
5245 Code cleanup and default config update for STC GP3 SSA board.
5247 Signed-off-by: Wolfgang Denk <wd@denx.de>
5249 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
5250 Author: Wolfgang Denk <wd@denx.de>
5251 Date: Thu Jul 5 17:56:27 2007 +0200
5253 Fixing some typos etc. introduced mainly by cfg patches.
5255 Signed-off-by: Wolfgang Denk <wd@denx.de>
5257 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
5258 Author: Wolfgang Denk <wd@denx.de>
5259 Date: Thu Jul 5 11:12:16 2007 +0200
5261 Minor coding style cleanup. Update CHANGELOG.
5263 commit dca3b3d6d6396b67e5e84af53452164923c73443
5264 Author: Jon Loeliger <jdl@jdl.com>
5265 Date: Wed Jul 4 22:33:46 2007 -0500
5267 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
5269 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5271 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
5272 Author: Jon Loeliger <jdl@jdl.com>
5273 Date: Wed Jul 4 22:33:38 2007 -0500
5275 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
5277 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5279 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
5280 Author: Jon Loeliger <jdl@jdl.com>
5281 Date: Wed Jul 4 22:33:30 2007 -0500
5283 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
5285 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5287 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
5288 Author: Jon Loeliger <jdl@jdl.com>
5289 Date: Wed Jul 4 22:33:23 2007 -0500
5291 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
5293 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5295 commit 26a34560d56a9df5bc2ae23525d9229736134757
5296 Author: Jon Loeliger <jdl@jdl.com>
5297 Date: Wed Jul 4 22:33:17 2007 -0500
5299 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
5301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5303 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
5304 Author: Jon Loeliger <jdl@jdl.com>
5305 Date: Wed Jul 4 22:33:13 2007 -0500
5307 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
5309 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5311 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
5312 Author: Jon Loeliger <jdl@jdl.com>
5313 Date: Wed Jul 4 22:33:07 2007 -0500
5315 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
5317 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5319 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
5320 Author: Jon Loeliger <jdl@jdl.com>
5321 Date: Wed Jul 4 22:33:01 2007 -0500
5323 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
5325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5327 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
5328 Author: Jon Loeliger <jdl@jdl.com>
5329 Date: Wed Jul 4 22:32:57 2007 -0500
5331 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
5333 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5335 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
5336 Author: Jon Loeliger <jdl@jdl.com>
5337 Date: Wed Jul 4 22:32:51 2007 -0500
5339 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
5341 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5343 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
5344 Author: Jon Loeliger <jdl@jdl.com>
5345 Date: Wed Jul 4 22:32:32 2007 -0500
5347 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
5349 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5351 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
5352 Author: Jon Loeliger <jdl@jdl.com>
5353 Date: Wed Jul 4 22:32:25 2007 -0500
5355 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
5357 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5359 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
5360 Author: Jon Loeliger <jdl@jdl.com>
5361 Date: Wed Jul 4 22:32:19 2007 -0500
5363 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
5365 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5367 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
5368 Author: Jon Loeliger <jdl@jdl.com>
5369 Date: Wed Jul 4 22:32:10 2007 -0500
5371 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
5373 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5375 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
5376 Author: Jon Loeliger <jdl@jdl.com>
5377 Date: Wed Jul 4 22:32:03 2007 -0500
5379 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
5381 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5383 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
5384 Author: Jon Loeliger <jdl@jdl.com>
5385 Date: Wed Jul 4 22:31:56 2007 -0500
5387 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
5389 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5391 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
5392 Author: Jon Loeliger <jdl@jdl.com>
5393 Date: Wed Jul 4 22:31:49 2007 -0500
5395 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
5397 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5399 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
5400 Author: Jon Loeliger <jdl@jdl.com>
5401 Date: Wed Jul 4 22:31:42 2007 -0500
5403 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
5405 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5407 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
5408 Author: Jon Loeliger <jdl@jdl.com>
5409 Date: Wed Jul 4 22:31:35 2007 -0500
5411 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
5413 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5415 commit d794cfefead5fc177cf4f41164e80382e9c9484a
5416 Author: Jon Loeliger <jdl@jdl.com>
5417 Date: Wed Jul 4 22:31:15 2007 -0500
5419 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
5421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5423 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
5424 Author: Jon Loeliger <jdl@jdl.com>
5425 Date: Wed Jul 4 22:31:07 2007 -0500
5427 include/configs: Use new CONFIG_CMD_* in STx board config files.
5429 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5431 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
5432 Author: Jon Loeliger <jdl@jdl.com>
5433 Date: Wed Jul 4 22:30:58 2007 -0500
5435 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
5437 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5439 commit 2694690e285acaa34922f55f4b5ae030da60c55a
5440 Author: Jon Loeliger <jdl@jdl.com>
5441 Date: Wed Jul 4 22:30:50 2007 -0500
5443 include/configs: Use new CONFIG_CMD_* in TQM board config files.
5445 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5447 commit 1cc4c458329765b58e584a19821e796b3c10e976
5448 Author: Jon Loeliger <jdl@jdl.com>
5449 Date: Wed Jul 4 22:30:28 2007 -0500
5451 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
5453 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5455 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
5456 Author: Jon Loeliger <jdl@jdl.com>
5457 Date: Wed Jul 4 22:30:06 2007 -0500
5459 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
5461 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5463 commit b44896215a09c60fa40cae906f7ed207bbc2c492
5464 Author: Sergei Poselenov <sposelenov@emcraft.com>
5465 Date: Thu Jul 5 08:17:37 2007 +0200
5467 Merged POST framework with the current TOT.
5469 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
5471 commit b24629fa377214d63bb40d1360e354b6d3e4af56
5472 Author: Jon Loeliger <jdl@jdl.com>
5473 Date: Wed Jun 13 13:23:15 2007 -0500
5475 mpc86xx: Remove old CFG_CMD_* references.
5477 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5479 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
5480 Author: Jon Loeliger <jdl@jdl.com>
5481 Date: Wed Jun 13 13:22:54 2007 -0500
5483 Add MPC8568MDS to MAKEALL 85xx target.
5485 It was missing from the original port submission.
5487 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5489 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
5490 Author: Jon Loeliger <jdl@jdl.com>
5491 Date: Wed Jun 13 13:22:08 2007 -0500
5493 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
5495 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5497 commit 56b304ac2091689506088a9ae67f63fd6300cf16
5498 Author: Jon Loeliger <jdl@jdl.com>
5499 Date: Wed Jun 13 13:21:37 2007 -0500
5501 Fix #if typo in CONFIG_CMD_* changes.
5503 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5505 commit f780b83316d9af1f61d71cc88b1917b387b9b995
5506 Author: Niklaus Giger <niklausgiger@gmx.ch>
5507 Date: Wed Jun 27 18:11:38 2007 +0200
5509 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
5511 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
5513 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
5514 Author: Stefan Roese <sr@denx.de>
5515 Date: Wed Jul 4 10:06:30 2007 +0200
5517 ppc4xx: Update lwmon5 board
5519 - Add optional ECC generation routine to preserve existing
5520 RAM values. This is needed for the Linux log-buffer support
5521 - Add optional DDR2 setup with CL=4
5522 - GPIO50 not used anymore
5523 - Lime register setup added
5525 Signed-off-by: Stefan Roese <sr@denx.de>
5527 commit 6810a34677dbc446334f5e451f1682426dd33b49
5528 Author: Grant Likely <grant.likely@secretlab.ca>
5529 Date: Tue Jul 3 00:17:28 2007 -0600
5531 Fix Makefile to use $(MKCONFIG) macro for all board ports
5533 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5535 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
5536 Author: Grant Likely <grant.likely@secretlab.ca>
5537 Date: Tue Jul 3 00:17:28 2007 -0600
5539 Fix Makefile to use $(MKCONFIG) macro for all board ports
5541 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5543 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
5544 Author: Grant Likely <grant.likely@secretlab.ca>
5545 Date: Tue Jul 3 00:34:49 2007 -0600
5547 Correct fixup relocation for mpc83xx
5549 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5551 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
5552 Author: Grant Likely <grant.likely@secretlab.ca>
5553 Date: Tue Jul 3 00:34:44 2007 -0600
5555 Correct fixup relocation for mpc8260
5557 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5559 commit f3a52fe05923935db86985daf9438e2f70ac39aa
5560 Author: Grant Likely <grant.likely@secretlab.ca>
5561 Date: Tue Jul 3 00:34:39 2007 -0600
5563 Correct fixup relocation for mpc824x
5565 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5567 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
5568 Author: Grant Likely <grant.likely@secretlab.ca>
5569 Date: Tue Jul 3 00:34:34 2007 -0600
5571 Correct fixup relocation for mpc8220
5573 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5575 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
5576 Author: Grant Likely <grant.likely@secretlab.ca>
5577 Date: Tue Jul 3 00:34:29 2007 -0600
5579 Correct fixup relocation for MPC5xxx
5581 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5583 commit 3649cd99ba815b6601868735765602f00ef3692b
5584 Author: Grant Likely <grant.likely@secretlab.ca>
5585 Date: Tue Jul 3 00:34:24 2007 -0600
5587 Correct relocation fixup for mpc5xx
5589 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5591 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
5592 Author: Grant Likely <grant.likely@secretlab.ca>
5593 Date: Tue Jul 3 00:34:19 2007 -0600
5595 Don't set gd->reloc_off if relocation of .fixup works correctly
5597 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5599 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
5600 Author: Grant Likely <grant.likely@secretlab.ca>
5601 Date: Tue Jul 3 00:34:14 2007 -0600
5603 Remove obsolete mpc83xx linker scripts
5605 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5607 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
5608 Author: Grant Likely <grant.likely@secretlab.ca>
5609 Date: Tue Jul 3 00:34:09 2007 -0600
5611 Consolidate mpc8260 linker scripts
5613 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5615 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
5616 Author: Grant Likely <grant.likely@secretlab.ca>
5617 Date: Tue Jul 3 00:34:04 2007 -0600
5619 Remove obsolete mpc824x linker scripts
5621 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5623 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
5624 Author: Grant Likely <grant.likely@secretlab.ca>
5625 Date: Tue Jul 3 00:33:59 2007 -0600
5627 Remove obsolete mpc824x linker scripts (3 of 4)
5629 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5631 commit a71c084f3ac7fedf144537db2b2da47323068833
5632 Author: Grant Likely <grant.likely@secretlab.ca>
5633 Date: Tue Jul 3 00:33:53 2007 -0600
5635 Remove obsolete mpc824x linker scripts (2 of 4)
5637 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5639 commit f670a15468d1365241d40022b9408e1004181f5e
5640 Author: Grant Likely <grant.likely@secretlab.ca>
5641 Date: Tue Jul 3 00:33:48 2007 -0600
5643 Remove obsolete mpc824x linker scripts (1 of 4)
5645 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5647 commit 09555bd45a04c0e54f172528d21bc18896550d28
5648 Author: Grant Likely <grant.likely@secretlab.ca>
5649 Date: Tue Jul 3 00:33:43 2007 -0600
5651 Remove obsolete mpc8220 linker scripts
5653 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5655 commit 5efb992f046e51225c93d52f80fecbe433abd789
5656 Author: Grant Likely <grant.likely@secretlab.ca>
5657 Date: Tue Jul 3 00:33:38 2007 -0600
5659 Remove obsolete mpc5xxx linker scripts (3 of 3)
5661 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5663 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
5664 Author: Grant Likely <grant.likely@secretlab.ca>
5665 Date: Tue Jul 3 00:33:33 2007 -0600
5667 Remove obsolete mpc5xxx linker scripts (2 of 3)
5669 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5671 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
5672 Author: Grant Likely <grant.likely@secretlab.ca>
5673 Date: Tue Jul 3 00:33:28 2007 -0600
5675 Remove obsolete mpc5xxx linker scripts (1 of 3)
5677 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5679 commit b7d8e05f8675249b5f208aa73babeed384a4519d
5680 Author: Grant Likely <grant.likely@secretlab.ca>
5681 Date: Tue Jul 3 00:33:23 2007 -0600
5683 Remove obsolete mpc5xx linker scripts
5685 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5687 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
5688 Author: Grant Likely <grant.likely@secretlab.ca>
5689 Date: Tue Jul 3 00:33:18 2007 -0600
5691 Consolidate mpc83xx linker scripts
5693 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5695 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
5696 Author: Grant Likely <grant.likely@secretlab.ca>
5697 Date: Tue Jul 3 00:33:13 2007 -0600
5699 Consolidate mpc8260 linker scripts
5701 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5703 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
5704 Author: Grant Likely <grant.likely@secretlab.ca>
5705 Date: Tue Jul 3 00:33:08 2007 -0600
5707 Consolidate mpc824x linker scripts
5709 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5711 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
5712 Author: Grant Likely <grant.likely@secretlab.ca>
5713 Date: Tue Jul 3 00:33:03 2007 -0600
5715 Consolidate mpc8220 linker scripts
5717 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5719 commit d181c9a15cd41863fe24840d17848429f27d3c8c
5720 Author: Grant Likely <grant.likely@secretlab.ca>
5721 Date: Tue Jul 3 00:32:58 2007 -0600
5723 Consolidate mpc5xxx linker scripts
5725 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5727 commit 287ac924adb7291bebe5086652a362a30ab28b13
5728 Author: Grant Likely <grant.likely@secretlab.ca>
5729 Date: Tue Jul 3 00:32:53 2007 -0600
5731 Consolidate mpc5xx linker scripts
5733 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5735 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
5736 Author: Wolfgang Denk <wd@denx.de>
5737 Date: Wed Jul 4 00:43:53 2007 +0200
5739 Fix a few file permission problems.
5741 Signed-off-by: Wolfgang Denk <wd@denx.de>
5743 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
5744 Author: Wolfgang Denk <wd@denx.de>
5745 Date: Wed Jul 4 00:38:38 2007 +0200
5747 Minor coding style cleanup. Rebuild CHANGELOG file.
5749 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
5750 Author: Jon Loeliger <jdl@jdl.com>
5751 Date: Mon Jun 11 19:03:44 2007 -0500
5753 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
5755 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5757 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
5758 Author: Jon Loeliger <jdl@jdl.com>
5759 Date: Mon Jun 11 19:03:39 2007 -0500
5761 README: Rewrite command line config to use CONFIG_CMD_* names.
5763 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5765 commit 72a074cec68e5bad60d63206c050974e08afd804
5766 Author: Jon Loeliger <jdl@jdl.com>
5767 Date: Mon Jun 11 19:03:34 2007 -0500
5769 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5771 This is a compatibility step that allows both the older form
5772 and the new form to co-exist for a while until the older can
5773 be removed entirely.
5775 All transformations are of the form:
5777 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5779 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5781 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5783 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
5784 Author: Jon Loeliger <jdl@jdl.com>
5785 Date: Mon Jun 11 19:03:28 2007 -0500
5787 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5789 This is a compatibility step that allows both the older form
5790 and the new form to co-exist for a while until the older can
5791 be removed entirely.
5793 All transformations are of the form:
5795 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5797 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5799 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5801 commit 9107ebe0d352420895ab69b715697bdebc8caf50
5802 Author: Jon Loeliger <jdl@jdl.com>
5803 Date: Mon Jun 11 19:03:23 2007 -0500
5805 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5807 This is a compatibility step that allows both the older form
5808 and the new form to co-exist for a while until the older can
5809 be removed entirely.
5811 All transformations are of the form:
5813 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5815 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5817 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5819 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
5820 Author: Jon Loeliger <jdl@jdl.com>
5821 Date: Mon Jun 11 19:03:19 2007 -0500
5823 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5825 This is a compatibility step that allows both the older form
5826 and the new form to co-exist for a while until the older can
5827 be removed entirely.
5829 All transformations are of the form:
5831 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5833 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5837 commit 737184114ec9c9e0ab94d6713536126073bd2472
5838 Author: Jon Loeliger <jdl@jdl.com>
5839 Date: Mon Jun 11 19:03:15 2007 -0500
5841 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5843 This is a compatibility step that allows both the older form
5844 and the new form to co-exist for a while until the older can
5845 be removed entirely.
5847 All transformations are of the form:
5849 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5851 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5853 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5855 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
5856 Author: Jon Loeliger <jdl@jdl.com>
5857 Date: Mon Jun 11 19:03:08 2007 -0500
5859 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5861 This is a compatibility step that allows both the older form
5862 and the new form to co-exist for a while until the older can
5863 be removed entirely.
5865 All transformations are of the form:
5867 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5869 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5871 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5873 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
5874 Author: Jon Loeliger <jdl@jdl.com>
5875 Date: Mon Jun 11 19:03:03 2007 -0500
5877 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5879 This is a compatibility step that allows both the older form
5880 and the new form to co-exist for a while until the older can
5881 be removed entirely.
5883 All transformations are of the form:
5885 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5887 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5889 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5891 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
5892 Author: Jon Loeliger <jdl@jdl.com>
5893 Date: Mon Jun 11 19:02:58 2007 -0500
5895 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5897 This is a compatibility step that allows both the older form
5898 and the new form to co-exist for a while until the older can
5899 be removed entirely.
5901 All transformations are of the form:
5903 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5905 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5907 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5909 commit 98b79003c21c2578206003256de4e781d6b36ca8
5910 Author: Jon Loeliger <jdl@jdl.com>
5911 Date: Mon Jun 11 19:02:53 2007 -0500
5913 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5915 This is a compatibility step that allows both the older form
5916 and the new form to co-exist for a while until the older can
5917 be removed entirely.
5919 All transformations are of the form:
5921 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5923 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5925 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5927 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
5928 Author: Jon Loeliger <jdl@jdl.com>
5929 Date: Mon Jun 11 19:02:49 2007 -0500
5931 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5933 This is a compatibility step that allows both the older form
5934 and the new form to co-exist for a while until the older can
5935 be removed entirely.
5937 All transformations are of the form:
5939 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5941 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5943 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5945 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
5946 Author: Jon Loeliger <jdl@jdl.com>
5947 Date: Mon Jun 11 19:02:34 2007 -0500
5949 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5951 This is a compatibility step that allows both the older form
5952 and the new form to co-exist for a while until the older can
5953 be removed entirely.
5955 All transformations are of the form:
5957 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5959 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5961 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5963 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
5964 Author: Jon Loeliger <jdl@jdl.com>
5965 Date: Mon Jun 11 19:02:20 2007 -0500
5967 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5969 This is a compatibility step that allows both the older form
5970 and the new form to co-exist for a while until the older can
5971 be removed entirely.
5973 All transformations are of the form:
5975 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5977 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5979 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5981 commit d5be43de93ff905c465e509d45a3164ef48d26e7
5982 Author: Jon Loeliger <jdl@jdl.com>
5983 Date: Mon Jun 11 19:02:10 2007 -0500
5985 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
5987 This is a compatibility step that allows both the older form
5988 and the new form to co-exist for a while until the older can
5989 be removed entirely.
5991 All transformations are of the form:
5993 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
5995 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
5997 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5999 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
6000 Author: Jon Loeliger <jdl@jdl.com>
6001 Date: Mon Jun 11 19:02:05 2007 -0500
6003 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6005 This is a compatibility step that allows both the older form
6006 and the new form to co-exist for a while until the older can
6007 be removed entirely.
6009 All transformations are of the form:
6011 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6013 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6015 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6017 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
6018 Author: Jon Loeliger <jdl@jdl.com>
6019 Date: Mon Jun 11 19:01:54 2007 -0500
6021 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6023 This is a compatibility step that allows both the older form
6024 and the new form to co-exist for a while until the older can
6025 be removed entirely.
6027 All transformations are of the form:
6029 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6031 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6033 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6035 commit a76adc8142c1d956385a109e0b70f9319ede4d66
6036 Author: Jon Loeliger <jdl@jdl.com>
6037 Date: Mon Jun 11 19:01:43 2007 -0500
6039 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
6041 This is a compatibility step that allows both the older form
6042 and the new form to co-exist for a while until the older can
6043 be removed entirely.
6045 All transformations are of the form:
6047 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
6049 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
6051 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6053 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
6054 Author: Jon Loeliger <jdl@jdl.com>
6055 Date: Mon Jun 11 19:01:34 2007 -0500
6057 Introduce initial versions of new Command Config files.
6059 Derive three new files from cmd_confdefs.h:
6060 config_bootp.h - Has BOOTP related config options, not commands
6061 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
6062 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
6064 For now, include "config_bootp.h" for compatability until all
6065 users of it directly include it properly.
6067 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6069 commit 1f2a05898658900dc5717761e27abf2052e67e13
6070 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
6071 Date: Sat Jun 30 18:50:48 2007 +0200
6075 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
6077 commit a5d71e290f3673269be8eefb4ec44f53412f9461
6078 Author: Heiko Schocher <hs@pollux.denx.de>
6079 Date: Mon Jun 25 19:11:37 2007 +0200
6081 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
6083 Signed-off-by: Heiko Schocher <hs@denx.de>
6085 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
6086 Author: Niklaus Giger <niklaus.giger@nestal.com>
6087 Date: Mon Jun 25 17:03:13 2007 +0200
6089 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
6091 This patch prints the DDR status registers upon machine check
6092 interrupt on the 440EPx/GRx. This can be useful especially when
6093 ECC support is enabled.
6095 I added some small changes to the original patch from Niklaus to
6096 make it compile clean.
6098 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
6099 Signed-off-by: Stefan Roese <sr@denx.de>
6101 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
6102 Author: Niklaus Giger <niklaus.giger@nestal.com>
6103 Date: Mon Jun 25 16:50:55 2007 +0200
6105 ppc4xx: Fix O=buildir builds
6107 This patch fixes the problem to assemble cpu/ppc4xx/start.S
6108 experienced last week where building failed having specified
6111 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
6113 commit 466fff1a7bb5fe764a06450626f6098219f446b8
6114 Author: Stefan Roese <sr@denx.de>
6115 Date: Mon Jun 25 15:57:39 2007 +0200
6117 ppc4xx: Add pci_pre_init() for 405 boards
6119 This patch removes the CFG_PCI_PRE_INIT option completely, since
6120 it's not needed anymore with the patch from Matthias Fuchs with
6121 the "weak" pci_pre_init() implementation.
6123 Signed-off-by: Stefan Roese <sr@denx.de>
6125 commit 6f35c53166213c24a5a0e2390ed861136ff73870
6126 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6127 Date: Sun Jun 24 17:41:21 2007 +0200
6129 ppc4xx: Maintenance patch for esd's CPCI405 derivats
6131 -add pci_pre_init() for pci interrupt fixup code
6132 -disable phy sleep mode via reset_phy() function
6133 -use correct io accessors
6136 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6138 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
6139 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6140 Date: Sun Jun 24 17:23:41 2007 +0200
6142 ppc4xx: Add pci_pre_init() for 405 boards
6144 This patch adds support for calling a plattform dependant
6145 pci_pre_init() function for 405 boards. This can be used to
6146 move the current pci_405gp_fixup_irq() function into the
6149 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
6150 A default function with 'weak' attribute is used when
6151 a board specific pci_pre_init() is not implemented.
6153 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6155 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
6156 Author: Wolfgang Denk <wd@denx.de>
6157 Date: Fri Jun 22 23:59:00 2007 +0200
6159 Coding stylke cleanup; rebuild CHANGELOG
6161 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
6162 Author: Igor Lisitsin <igor@emcraft.com>
6163 Date: Wed Apr 18 14:55:19 2007 +0400
6165 Adapt log buffer code to support Linux 2.6
6167 A new environment variable, "logversion", selects the log buffer
6168 behaviour. If it is not set or set to a value other than 2, then the
6169 old, Linux 2.4.4, behaviour is selected.
6171 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
6174 commit a11e06965ec91270c51853407ff1261d3c740386
6175 Author: Igor Lisitsin <igor@emcraft.com>
6176 Date: Wed Mar 28 19:06:19 2007 +0400
6178 Extend POST support for PPC440
6180 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
6182 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
6185 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
6186 Author: Heiko Schocher <hs@pollux.denx.de>
6187 Date: Fri Jun 22 19:11:54 2007 +0200
6189 [PCS440EP] upgrade the PCS440EP board:
6190 - Show on the Status LEDs, some States of the board.
6191 - Get the MAC addresses from the EEProm
6193 - use the CF on the board.
6194 - check the U-Boot image in the Flash with a SHA1
6196 - use dynamic TLB entries generation for the SDRAM
6198 Signed-off-by: Heiko Schocher <hs@denx.de>
6200 commit 3a1f5c81b0b9557817a789bece839905581c2205
6201 Author: Stefan Roese <sr@denx.de>
6202 Date: Fri Jun 22 16:58:40 2007 +0200
6204 ppc4xx: Fix problem with extended program_tlb() funtion
6206 The recently extended program_tlb() function had a problem when
6207 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
6208 virtual address was not incremented. This patch fixes this issue
6209 and is tested on Katmai with 512MB SDRAM.
6211 Signed-off-by: Stefan Roese <sr@denx.de>
6213 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
6214 Author: Rafal Jaworowski <raj@semihalf.com>
6215 Date: Fri Jun 22 14:58:04 2007 +0200
6217 [ppc] Fix build breakage for all non-4xx PowerPC variants.
6219 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
6222 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
6223 Author: Mike Frysinger <vapier@gentoo.org>
6224 Date: Fri Jun 22 10:34:12 2007 +0200
6226 [patch] add nand_init() prototype to nand.h
6228 since nand_init() is expected to be called by other parts of u-boot, there
6229 should be a prototype for it in nand.h
6231 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6232 Signed-off-by: Stefan Roese <sr@denx.de>
6234 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
6235 Author: Wolfgang Denk <wd@denx.de>
6236 Date: Wed Jun 20 18:14:24 2007 +0200
6238 Coding style cleanup. Refresh CHANGELOG.
6240 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
6241 Author: Stefan Roese <sr@denx.de>
6242 Date: Tue Jun 19 17:22:44 2007 +0200
6244 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
6246 This patch adds a board command to configure the I2C bootstrap EEPROM
6247 values. Right now 533 and 667MHz are supported for booting either via NOR
6248 or NAND FLASH. Here the usage:
6250 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
6251 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
6253 Signed-off-by: Stefan Roese <sr@denx.de>
6255 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
6256 Author: Stefan Roese <sr@denx.de>
6257 Date: Tue Jun 19 16:42:31 2007 +0200
6259 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
6261 The latest changes showed a problem with the location of the NAND-SPL
6262 image in the OCM and the init-data area (incl. cache). This patch
6265 Signed-off-by: Stefan Roese <sr@denx.de>
6267 commit 86ba99e34194394052d24c04dc40d1263d29a26f
6268 Author: Stefan Roese <sr@denx.de>
6269 Date: Tue Jun 19 16:40:58 2007 +0200
6271 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
6273 Signed-off-by: Stefan Roese <sr@denx.de>
6275 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
6276 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6277 Date: Mon Jun 18 13:50:13 2007 -0500
6279 Added M5329AFEE and M5329BFEE Platforms
6281 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
6282 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
6283 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
6286 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
6287 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
6288 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
6289 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
6290 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
6291 lib_m68k/time.c, net/eth.c and rtc/Makefile
6293 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6295 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
6296 Author: Michal Simek <monstr@monstr.eu>
6297 Date: Sun Jun 17 19:04:11 2007 +0200
6299 [fix] email reparation
6301 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
6302 Author: Michal Simek <monstr@monstr.eu>
6303 Date: Sun Jun 17 19:03:21 2007 +0200
6305 [FIX] fix microblaze file permitission
6307 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
6308 Author: Stefan Roese <sr@denx.de>
6309 Date: Fri Jun 15 11:33:41 2007 +0200
6311 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
6313 Now CONFIG_440 has to be defined in all PPC440 board config files.
6315 Signed-off-by: Stefan Roese <sr@denx.de>
6317 commit efa35cf12d914d4caba942acd5a6c45f217de302
6318 Author: Grzegorz Bernacki <gjb@semihalf.com>
6319 Date: Fri Jun 15 11:19:28 2007 +0200
6321 ppc4xx: Clean up 440 exceptions handling
6323 - Introduced dedicated switches for building 440 and 405 images required
6324 for 440-specific machine instructions like 'rfmci' etc.
6326 - Exception vectors moved to the proper location (_start moved away from
6327 the critical exception handler space, which it occupied)
6329 - CriticalInput now serviced (with default handler)
6331 - MachineCheck properly serviced (added a dedicated handler and return
6334 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
6335 unhandled and those not relevant for 4xx were eliminated)
6337 - Eliminated Linux leftovers, removed dead code
6339 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
6340 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
6341 Signed-off-by: Stefan Roese <sr@denx.de>
6343 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
6344 Author: Stefan Roese <sr@denx.de>
6345 Date: Fri Jun 15 08:18:01 2007 +0200
6347 [ppc4xx] Add initial lwmon5 board support
6349 This patch adds initial support for the Liebherr lwmon5 board euqipped
6350 with an AMCC 440EPx PowerPC.
6352 Signed-off-by: Stefan Roese <sr@denx.de>
6354 commit 85f737376d5ff3d5f0d45a8b657686326d175307
6355 Author: Stefan Roese <sr@denx.de>
6356 Date: Fri Jun 15 07:39:43 2007 +0200
6358 [ppc4xx] Extend 44x GPIO setup with default output state
6360 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
6361 is extended with the default GPIO output state (level).
6363 Signed-off-by: Stefan Roese <sr@denx.de>
6365 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
6366 Author: Stefan Roese <sr@denx.de>
6367 Date: Thu Jun 14 11:14:32 2007 +0200
6369 [ppc4xx] Extend program_tlb() with virtual & physical addresses
6371 Now program_tlb() allows to program a TLB (or multiple) with
6372 different virtual and physical addresses. With this change, now one
6373 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
6374 diabled and once with caches enabled.
6376 Signed-off-by: Stefan Roese <sr@denx.de>
6378 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
6379 Author: Detlev Zundel <dzu@denx.de>
6380 Date: Wed May 23 19:02:41 2007 +0200
6382 Change 'repeatable' attribute of some commands to sensible values.
6384 Most prominently this changes 'erase' to be non-repeatable.
6386 Signed-off-by: Detlev Zundel <dzu@denx.de>
6388 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
6389 Author: Detlev Zundel <dzu@denx.de>
6390 Date: Wed May 23 18:47:48 2007 +0200
6392 Fix 'run' not to continue after interrupted command
6394 Signed-off-by: Detlev Zundel <dzu@denx.de>
6396 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
6397 Author: Jason Jin <Jason.jin@freescale.com>
6398 Date: Mon Jun 11 15:14:24 2007 +0200
6400 USB: This patch fix readl in ohci swap reg access.
6402 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6404 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
6405 Author: Bartlomiej Sieka <tur@semihalf.com>
6406 Date: Fri Jun 8 14:52:22 2007 +0200
6408 TQM5200: Add Flat Device Tree support, update default env. accordingly.
6410 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
6411 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6413 commit 9045f33c023f698660a2e45d1b2194c0711abebc
6414 Author: Wolfgang Denk <wd@denx.de>
6415 Date: Fri Jun 8 10:24:58 2007 +0200
6417 Fix config problems on SC3 board; make ide_reset_timeout work.
6419 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
6420 Author: Benoît Monin <bmonin@adeneo.eu>
6421 Date: Fri Jun 8 09:55:24 2007 +0200
6423 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
6425 Set the correct value in GPIOx_TCR when configuring the gpio
6426 with CFG_440_GPIO_TABLE.
6428 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
6429 Signed-off-by: Stefan Roese <sr@denx.de>
6431 commit f539edc076cfe52bff919dd512ba8d7af0e22092
6432 Author: Vadim Bendebury <vbendeb@google.com>
6433 Date: Thu May 24 15:52:25 2007 -0700
6435 cosmetic changes to bcm570x driver
6437 This is a cosmetic only changes submission.
6438 It affects files relevant to bcm570x driver.
6439 the commands used to generate this change was
6442 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
6444 The BMW target (the only one using this chip so far) builds cleanly, the
6445 `before and after' generated object files for drivers/bcm570x.c and
6446 drivers/tigon3.o are identical as reported by objdump -d
6448 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
6449 Signed-off-by: Ben Warren <bwarren@qstreams.com>
6451 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
6452 Author: Wolfgang Denk <wd@denx.de>
6453 Date: Wed Jun 6 16:26:56 2007 +0200
6455 Coding Style cleanup; generate new CHANGELOG file.
6457 Signed-off-by: Wolfgang Denk <wd@denx.de>
6459 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
6460 Author: Markus Klotzbuecher <mk@denx.de>
6461 Date: Wed Jun 6 11:49:44 2007 +0200
6463 TRAB, USB: update trab board configuration for use of generic ohci driver
6465 commit dace45acd1c1357daa9322099d07c9a9e08b0024
6466 Author: Markus Klotzbuecher <mk@denx.de>
6467 Date: Wed Jun 6 11:49:43 2007 +0200
6469 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
6471 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
6472 Author: Markus Klotzbuecher <mk@denx.de>
6473 Date: Wed Jun 6 11:49:43 2007 +0200
6475 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
6477 commit fc43be478f2aa37ce38acd85355038866e4162af
6478 Author: Markus Klotzbuecher <mk@denx.de>
6479 Date: Wed Jun 6 11:49:35 2007 +0200
6481 USB/OHCI: endianness cleanup in the generic ohci driver
6483 commit c440bfe6d6d92d66478a7e84402b31f48413617b
6484 Author: Stefan Roese <sr@denx.de>
6485 Date: Wed Jun 6 11:42:13 2007 +0200
6487 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
6489 This patch adds NAND booting support for the AMCC Acadia eval board.
6491 Please make sure to configure jumper J7 to position 2-3 when booting
6492 from NOR, and to position 1-2 when booting for NAND.
6494 I also added a board command to configure the I2C bootstrap EEPROM
6495 values. Right now only 267MHz is support for booting either via NOR
6496 or NAND FLASH. Here the usage:
6498 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
6499 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
6501 Signed-off-by: Stefan Roese <sr@denx.de>
6503 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
6504 Author: Rodolfo Giometti <giometti@linux.it>
6505 Date: Wed Jun 6 10:08:14 2007 +0200
6507 Files include/linux/byteorder/{big,little}_endian.h define
6508 __BIG_ENDIAN and __LITTLE_ENDIAN.
6510 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
6512 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
6513 Author: Zhang Wei <wei.zhang@freescale.com>
6514 Date: Wed Jun 6 10:08:14 2007 +0200
6516 Add USB PCI-OHCI, USB keyboard and event poll support to the
6517 MPC8641HPCN board config file.
6519 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6521 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
6522 Author: Zhang Wei <wei.zhang@freescale.com>
6523 Date: Wed Jun 6 10:08:14 2007 +0200
6525 USB PCI-OHCI, interrupt pipe and usb event poll support
6527 This patch added USB PCI-OHCI chips support, interrupt pipe support
6528 and usb event poll support. For supporting the USB interrupt pipe, the
6529 globe urb_priv is moved to purb in ed struct. Now, we can process
6530 several urbs at one time. The interrupt pipe support codes are ported
6531 from Linux kernel 2.4.
6533 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6535 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
6536 Author: Zhang Wei <wei.zhang@freescale.com>
6537 Date: Wed Jun 6 10:08:13 2007 +0200
6539 USB event poll support
6541 This patch adds USB event poll support, which could be used in usbkbd
6542 and other usb devices driver when the asynchronous interrupt
6543 processing is supported.
6545 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
6547 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
6548 Author: Rodolfo Giometti <giometti@linux.it>
6549 Date: Wed Jun 6 10:08:12 2007 +0200
6551 ISP116x: delay for crappy USB keys
6553 Using some (very) slow USB keys cause the USB host controller buffers
6554 are not ready to be read by the CPU so we need an extra delay before
6555 reading the USB storage data.
6557 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
6559 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
6560 Author: Markus Klotzbuecher <mk@denx.de>
6561 Date: Wed Jun 6 10:08:12 2007 +0200
6563 Change duplicate usb_cpu_init_fail to usb_board_init_fail
6565 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
6568 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
6570 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
6571 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
6572 Date: Tue Jun 5 12:30:52 2007 -0500
6574 mpc8641 image size cleanup
6576 e600 does not have a bootpg restriction.
6577 Move the version string to beginning of image at fff00000.
6578 Resetvec.S is not needed.
6579 Update flash copy instructions.
6580 Add tftpflash env variable
6582 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
6583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6585 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
6586 Author: Benoît Monin <bmonin@adeneo.eu>
6587 Date: Mon Jun 4 08:36:05 2007 +0200
6589 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
6591 The attached patch is mainly cosmetic, allowing u-boot to
6592 display the correct bootstrap option letter according to the
6595 The original patch was extended with 405EZ support by Stefan
6598 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
6599 Signed-off-by: Stefan Roese <sr@denx.de>
6601 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
6602 Author: Nikita V. Youshchenko <yoush@debian.org>
6603 Date: Wed May 23 12:45:19 2007 +0400
6605 fix compilation problem for mpc8349itx CFG_RAMBOOT
6607 Current include/configs/MPC8349ITX.h does contain some support for building
6608 image that will be started from memory (without putting in into flash).
6609 It could be triggered by building with TEXT_BASE set to a low value.
6611 However, this support is incomplete: using of low TEXT_BASE causes
6612 defining configuration macros in inconsistent way, which later leads
6613 to compilation errors. In particular. flash support is being disabled,
6614 but then flash structures get referenced.
6616 This patch fixes this, making it possible to build with low TEXT_BASE.
6618 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
6620 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6622 commit 8a364f0970de49949d635e60accf463c6443ef8c
6623 Author: Nikita V. Youshchenko <yoush@debian.org>
6624 Date: Wed May 23 12:45:25 2007 +0400
6626 add missing 'console' var to default mpc8349itx config
6628 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6630 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
6631 Author: Stefan Roese <sr@denx.de>
6632 Date: Fri Jun 1 16:18:17 2007 +0200
6634 ppc4xx: Add missing file for Bamboo NAND booting support
6636 Signed-off-by: Stefan Roese <sr@denx.de>
6638 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
6639 Author: Stefan Roese <sr@denx.de>
6640 Date: Fri Jun 1 15:58:19 2007 +0200
6642 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
6644 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
6645 suggested by AMCC it is not recommended to dynamically change the EBC
6646 speed after bootup. So we undo this change to be on the safe side.
6648 Signed-off-by: Stefan Roese <sr@denx.de>
6650 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
6651 Author: Stefan Roese <sr@denx.de>
6652 Date: Fri Jun 1 15:29:04 2007 +0200
6654 ppc4xx: Update Sequoia NAND booting support with ECC
6656 Signed-off-by: Stefan Roese <sr@denx.de>
6658 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
6659 Author: Stefan Roese <sr@denx.de>
6660 Date: Fri Jun 1 15:27:11 2007 +0200
6662 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
6664 This patch adds NAND booting support for the AMCC Bamboo eval board.
6665 Since the NAND-SPL boot image is limited to 4kbytes, this version
6666 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
6667 supported, since the setup code for I2C DIMM autodetection and
6668 configuration is too big for this NAND bootloader.
6670 Signed-off-by: Stefan Roese <sr@denx.de>
6672 commit 42be56f53c8b107868e6125c8524ae84293e95a7
6673 Author: Stefan Roese <sr@denx.de>
6674 Date: Fri Jun 1 15:23:04 2007 +0200
6676 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
6678 The U-Boot NAND booting support is now extended to support ECC
6679 upon loading of the NAND U-Boot image.
6681 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
6683 Signed-off-by: Stefan Roese <sr@denx.de>
6685 commit a471db07fbb65a841ffc9f4f112562b945230f98
6686 Author: Stefan Roese <sr@denx.de>
6687 Date: Fri Jun 1 15:19:29 2007 +0200
6689 ppc4xx: Prepare Bamboo port for NAND booting support
6691 This patch updates the "normal" Bamboo NOR booting port, so
6692 that it is compatible with the coming soon NAND booting
6695 It also enables the 2nd NAND flash on the Bamboo.
6697 Signed-off-by: Stefan Roese <sr@denx.de>
6699 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
6700 Author: Stefan Roese <sr@denx.de>
6701 Date: Fri Jun 1 15:16:58 2007 +0200
6703 ppc4xx: Update in_be32() functions and friends to latest Linux version
6705 Signed-off-by: Stefan Roese <sr@denx.de>
6707 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
6708 Author: Stefan Roese <sr@denx.de>
6709 Date: Fri Jun 1 15:15:12 2007 +0200
6711 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
6713 This patch adds hardware ECC support to the NDFC driver. It also
6714 changes the register access from using the "simple" in32/out32
6715 functions to the in_be32/out_be32 functions, which make sure
6716 that the access is correctly synced. This is the only recommended
6717 access to SoC registers in the current Linux kernel.
6719 Signed-off-by: Stefan Roese <sr@denx.de>
6721 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
6722 Author: Stefan Roese <sr@denx.de>
6723 Date: Fri Jun 1 15:12:15 2007 +0200
6725 NAND: Update nand_ecc.c to latest Linux version
6727 This patch updates the nand_ecc code to the latest Linux version.
6728 The main reason for this is the more compact code. This makes
6729 it possible to include the ECC code into the NAND bootloader
6730 image (NAND_SPL) for PPC4xx.
6732 Signed-off-by: Stefan Roese <sr@denx.de>
6734 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
6735 Author: Stefan Roese <sr@denx.de>
6736 Date: Fri Jun 1 15:09:50 2007 +0200
6738 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
6740 Signed-off-by: Stefan Roese <sr@denx.de>
6742 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
6743 Author: Stefan Roese <sr@denx.de>
6744 Date: Fri Jun 1 13:45:24 2007 +0200
6746 ppc4xx: Change Luan config file to support ECC
6748 With the updated 44x DDR2 driver the Luan board now supports
6749 ECC generation and checking.
6751 Signed-off-by: Stefan Roese <sr@denx.de>
6753 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
6754 Author: Stefan Roese <sr@denx.de>
6755 Date: Fri Jun 1 13:45:00 2007 +0200
6757 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
6759 Add config option for 180 degree advance clock control as needed
6760 for the AMCC Luan eval board.
6762 Signed-off-by: Stefan Roese <sr@denx.de>
6764 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
6765 Author: Wolfgang Denk <wd@denx.de>
6766 Date: Thu May 31 17:20:09 2007 +0200
6768 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
6770 Signed-off-by: Wolfgang Denk <wd@denx.de>
6772 commit 7049288fb1f16f1b317140226cdebd07bd416395
6773 Author: Bartlomiej Sieka <tur@semihalf.com>
6774 Date: Sun May 27 17:26:46 2007 +0200
6776 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
6778 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
6780 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
6781 Author: Bartlomiej Sieka <tur@semihalf.com>
6782 Date: Sun May 27 17:06:36 2007 +0200
6784 Motion-PRO: Add support for redundant environment.
6786 Enable redundant environment, add a MTD partition for it; also add env.
6787 variable command for passing MTD partitions to the kernel command line.
6789 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
6790 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6792 commit a26eabeec31746f06d309103690892805696e344
6793 Author: Bartlomiej Sieka <tur@semihalf.com>
6794 Date: Sun May 27 17:05:11 2007 +0200
6796 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
6798 Allow passing longer command line to the kernel - useful especially
6799 for passing MTD partition layout.
6801 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
6802 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6804 commit 9160b96f71483a116de81c68985e8ee306d36764
6805 Author: Bartlomiej Sieka <tur@semihalf.com>
6806 Date: Sun May 27 17:04:18 2007 +0200
6808 Fix: Add missing NULL termination in strings expanded by macros parser.
6810 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
6811 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6813 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
6814 Author: Bartlomiej Sieka <tur@semihalf.com>
6815 Date: Sun May 27 17:03:37 2007 +0200
6817 Motion-PRO: Update EEPROM's page write bits and write delay.
6819 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
6820 have a page write capability of two bytes", and "This device offers fast (1ms)
6821 byte write". Add 3ms of extra delay.
6823 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
6824 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6826 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
6827 Author: Bartlomiej Sieka <tur@semihalf.com>
6828 Date: Sun May 27 16:58:45 2007 +0200
6830 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
6832 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
6833 networking does not function. This commit switches PHY to TX mode by clearing
6834 the FX_SEL bit of Mode Control Register. It also reverses commit
6835 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
6837 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
6838 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6840 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
6841 Author: Bartlomiej Sieka <tur@semihalf.com>
6842 Date: Sun May 27 16:57:15 2007 +0200
6844 Motion-PRO: Add support for the temperature sensor.
6846 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
6847 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6849 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
6850 Author: Bartlomiej Sieka <tur@semihalf.com>
6851 Date: Sun May 27 16:55:23 2007 +0200
6853 Motion-PRO: Add displaying of CPLD revision information during boot.
6855 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
6856 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6858 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
6859 Author: Bartlomiej Sieka <tur@semihalf.com>
6860 Date: Sun May 27 16:53:43 2007 +0200
6862 MPC5xxx: Change names of defines related to IPB and PCI clocks.
6864 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
6865 them does not cause PCI or IPB clocks to run at the specified speed.
6866 Instead, they configure divisors used to calculate said clocks. This
6867 patch renames the defines according to their real function.
6869 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
6870 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6872 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
6873 Author: Bartlomiej Sieka <tur@semihalf.com>
6874 Date: Sun May 27 16:51:48 2007 +0200
6876 Motion-PRO: Add LED support.
6878 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
6879 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6880 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6882 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
6883 Author: Ulf Samuelsson <ulf@atmel.com>
6884 Date: Thu May 24 12:12:47 2007 +0200
6886 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
6888 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
6889 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
6890 Signed-off-by: Stefan Roese <sr@denx.de>
6892 commit d756894722c888d09a9fa1df8323753772d3dcce
6893 Author: Stefan Roese <sr@denx.de>
6894 Date: Thu May 24 09:49:00 2007 +0200
6896 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
6898 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
6899 fixes a small bug in the 405EZ OCM initialization. Thanks for
6902 Signed-off-by: Stefan Roese <sr@denx.de>
6904 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
6905 Author: Stefan Roese <sr@denx.de>
6906 Date: Thu May 24 08:22:09 2007 +0200
6908 ppc4xx: Update AMCC Acadia support for board revision 1.1
6910 This patch updates the Acadia (405EZ) support for the new 1.1 board
6911 revision. It also adds support for NAND FLASH via the 4xx NDFC.
6913 Please note that the jumper J7 must be in position 2-3 for this
6914 NAND support. Position 1-2 is for NAND booting only. NAND booting
6915 support will follow later.
6917 Signed-off-by: Stefan Roese <sr@denx.de>
6919 commit 822d55365bb557e084d0e33625a6dedcc866110b
6920 Author: Jon Loeliger <jdl@freescale.com>
6921 Date: Wed May 23 14:09:46 2007 -0500
6923 Add LIST_86xx MAKEALL target for PowerPC builds.
6925 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6927 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
6928 Author: Stefan Roese <sr@denx.de>
6929 Date: Tue May 22 12:48:09 2007 +0200
6931 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
6933 Signed-off-by: Stefan Roese <sr@denx.de>
6935 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
6936 Author: Stefan Roese <sr@denx.de>
6937 Date: Tue May 22 12:46:10 2007 +0200
6939 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
6941 This patch adds support for 405 PPC's to the 4xx NAND driver
6942 ndfc.c. This is in preparation for the new AMCC 405EZ.
6944 Signed-off-by: Stefan Roese <sr@denx.de>
6946 commit 10603d76767426be803dadd4fb688b97eb69481c
6947 Author: Stefan Roese <sr@denx.de>
6948 Date: Mon May 21 07:41:22 2007 +0200
6950 ppc4xx: Fix problem in 405EZ OCM initialization
6952 As spotted by Bruce Adler this patch fixes an initialization problem
6955 Signed-off-by: Stefan Roese <sr@denx.de>
6957 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
6958 Author: Peter Pearse <peter.pearse@arm.com>
6959 Date: Fri May 18 16:47:03 2007 +0100
6961 Reduce line lengths to 80 characters max.
6963 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
6964 Author: Peter Pearse <peter.pearse@arm.com>
6965 Date: Fri May 18 14:34:07 2007 +0100
6967 Makefile permissions
6969 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
6970 Author: Peter Pearse <peter.pearse@arm.com>
6971 Date: Fri May 18 14:33:11 2007 +0100
6973 Makefile permissions
6975 commit 255a3577c848706441daee0174543efe205a77f8
6976 Author: Kim Phillips <kim.phillips@freescale.com>
6977 Date: Wed May 16 16:52:19 2007 -0500
6979 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
6981 For all practical u-boot purposes, TSECs don't differ throughout the
6982 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
6984 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6986 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
6987 Author: Stefano Babic <sbabic@denx.de>
6988 Date: Wed May 16 14:49:12 2007 +0200
6990 Fix compile problem cause my Microblaze merge
6992 Signed-off-by: Stefano Babic <sbabic@denx.de>
6994 commit ada4697d0230d6da552867777f98a67ec3ba2579
6995 Author: Jeffrey Mann <mannj@embeddedplanet.com>
6996 Date: Wed May 16 13:23:10 2007 +0200
6998 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
7000 Because the Sequoia board does not boot with an EBC faster than 66MHz,
7001 the clock divider are changed after the initial boot process.
7003 This allows for maximum clocking speeds to be achieved on newer boards.
7004 Sequoia boards with 666.66 MHz processors require that the EBC divider
7005 be set to 3 in order to start the initial boot process at a slower EBC
7006 speed. After the initial boot process, the divider can be set back to 2,
7007 which will cause the boards to run at 83.333MHz. This is backward
7008 compatible with boards with 533.33 MHz processors, as these boards will
7009 already be set with an EBC divider of 2.
7011 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
7013 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
7014 Author: Wolfgang Denk <wd@denx.de>
7015 Date: Wed May 16 01:16:53 2007 +0200
7017 Minor Coding Style cleanup, update CHANGELOG.
7019 Signed-off-by: Wolfgang Denk <wd@denx.de>
7021 commit d62f64cc23a940eafe712c776b3249e4160753d1
7022 Author: Wolfgang Denk <wd@denx.de>
7023 Date: Wed May 16 00:13:33 2007 +0200
7025 Coding Style Cleanup, new CHANGELOG
7027 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
7028 Author: Wolfgang Denk <wd@denx.de>
7029 Date: Tue May 15 23:38:05 2007 +0200
7031 Minor coding style cleanup.
7033 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
7034 Author: mushtaq khan <mushtaq_k@procsys.com>
7035 Date: Fri Apr 20 14:23:02 2007 +0530
7037 Add driver for S-ATA-controller on Intel processors with South
7038 Bridge, ICH-5, ICH-6 and ICH-7.
7042 1. Code is divided in to two files. All functions, which are
7043 controller specific are kept in "drivers/ata_piix.c" file and
7044 functions, which are not controller specific, are kept in
7045 "common/cmd_sata.c" file.
7047 2. Reading and Writing from the S-ATA drive is done using PIO method.
7049 3. Driver can be configured for 48-bit addressing by defining macro
7050 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
7053 4. S-ATA read function is hooked to the File system, commands like
7054 ext2ls and ext2load file can be used. This has been tested.
7056 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
7057 controller and identifies the S-ATA drives connected to it.
7059 6. U-Boot command "sata" is added, which is used to read/write, print
7060 partition table and get info about the drives present. This I have
7061 implemented in same way as "ide" command is implemented in U-Boot.
7063 7. This driver is for S-ATA in native mode.
7065 8. This driver does not support the Native command queuing and
7068 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
7070 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
7071 Author: mushtaq khan <mushtaq_k@procsys.com>
7072 Date: Mon Apr 30 15:57:22 2007 +0530
7074 Fixes bug clearing the bss section for i386
7077 There is a bug in the code of clearing the bss section for processor
7078 i386.(File: cpu/i386/start.S)
7079 In the code, bss_start addr (starting addr of bss section) is put into
7080 the register %eax, but the code which clears the bss section refers to
7081 the addr pointed by %edi.
7083 This patch fixes this bug by putting bss_start into %edi register.
7085 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
7087 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
7088 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
7089 Date: Mon Apr 30 16:47:28 2007 -0500
7091 Add support for BCM5464 Quad Phy
7093 Added support for Broadcom's BCM5464 Quad Phy
7095 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
7097 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
7098 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
7099 Date: Wed May 9 08:10:57 2007 +0800
7101 Search the exception table with linear algorithm
7103 Search the exception table with linear algorithm instead of
7104 bisecting algorithm.
7105 Because the exception table might be unsorted.
7107 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7109 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
7110 Author: Aubrey.Li <aubrey.adi@gmail.com>
7111 Date: Mon May 14 11:47:35 2007 +0800
7113 Fix compilation issues on MACOSX
7115 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
7116 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
7118 commit 56fd7162985c412317bbf763a225fba23c64fd31
7119 Author: Stephen Williams <steve@icarus.com>
7120 Date: Tue May 15 07:55:42 2007 -0700
7122 Fix for compile of JSE target
7124 The attached patch fixes the compile of the JSE board in the
7125 denx git as of 14 may 2007. It is an extremely simple patch,
7126 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
7128 Fix to compile JSE against 20070514 git of u-boot
7130 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
7131 Author: Stefan Roese <sr@denx.de>
7132 Date: Fri May 11 12:01:49 2007 +0200
7134 ppc4xx: Add mtcpr/mfcpr access macros
7136 Signed-off-by: Stefan Roese <sr@denx.de>
7138 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
7139 Author: Stefan Roese <sr@denx.de>
7140 Date: Fri May 11 12:01:06 2007 +0200
7142 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
7144 Signed-off-by: Stefan Roese <sr@denx.de>
7146 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
7147 Author: Piotr Kruszynski <ppk@semihalf.com>
7148 Date: Thu May 10 16:55:52 2007 +0200
7150 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
7153 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
7154 Author: Peter Pearse <peter.pearse@arm.com>
7155 Date: Wed May 9 11:42:44 2007 +0100
7157 Add the board directory for SMN42
7159 commit 160131bf965785419626df6c388729fe0b597992
7160 Author: Peter Pearse <peter.pearse@arm.com>
7161 Date: Wed May 9 11:41:58 2007 +0100
7163 Add the files for the SMN42 board
7165 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
7166 Author: Peter Pearse <peter.pearse@arm.com>
7167 Date: Wed May 9 11:40:34 2007 +0100
7169 Remove the deleted files for the SMN42 patch
7171 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
7172 Author: Peter Pearse <peter.pearse@arm.com>
7173 Date: Wed May 9 11:37:56 2007 +0100
7175 New board SMN42 branch
7177 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
7178 Author: Peter Pearse <peter.pearse@arm.com>
7179 Date: Wed May 9 10:24:38 2007 +0100
7181 Makefile permissions
7183 commit b84289b595731e8851df46e893845cc1322c9b9b
7184 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7185 Date: Tue May 8 14:17:07 2007 -0500
7187 8641hpcn: Fix Makefile after moving pixis to board/freescale.
7189 The OBJTREE != SRCTREE build scenario was broken.
7192 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7193 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7195 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
7196 Author: Michal Simek <monstr@monstr.eu>
7197 Date: Tue May 8 15:57:43 2007 +0200
7199 add: reading special purpose registers
7201 commit 1a50f164beb065f360fbddb76029607d6b099698
7202 Author: Michal Simek <monstr@monstr.eu>
7203 Date: Tue May 8 14:52:52 2007 +0200
7205 add: Microblaze V5 exception handling
7207 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
7208 Author: Michal Simek <monstr@monstr.eu>
7209 Date: Tue May 8 14:39:11 2007 +0200
7211 add: FSL control read and write
7213 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
7214 Author: Piotr Kruszynski <ppk@semihalf.com>
7215 Date: Tue May 8 13:05:44 2007 +0200
7217 [Motion-PRO] Add support for I2C, EEPROM and RTC.
7219 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
7220 Author: Bartlomiej Sieka <tur@semihalf.com>
7221 Date: Tue May 8 10:23:56 2007 +0200
7223 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
7226 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
7227 Author: Bartlomiej Sieka <tur@semihalf.com>
7228 Date: Tue May 8 09:39:12 2007 +0200
7230 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
7231 eliminates networking problems in Linux (timeouts).
7233 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
7234 Author: Bartlomiej Sieka <tur@semihalf.com>
7235 Date: Tue May 8 09:21:57 2007 +0200
7237 [Motion-PRO] Enable Flat Device Tree support and modify default environment
7238 to allow booting of FDT-expecting kernels.
7240 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
7241 Author: Michal Simek <monstr@monstr.eu>
7242 Date: Mon May 7 23:58:31 2007 +0200
7244 new: USE_MSR_INTR support
7246 commit 008861a2f3ef2c062744d733787c7e530a1b8761
7247 Author: Bartlomiej Sieka <tur@semihalf.com>
7248 Date: Mon May 7 22:36:15 2007 +0200
7250 [MPC5xxx] There are networking problems on the Motion-PRO board with
7251 current PHY initalization code (tftp timeouts all the time). This commit
7252 temporarily disables PHY initalization sequence to make the networking
7253 operational, until a fix is found.
7255 commit abca901869c3760b6c5fecb825db6c1d91a78a93
7256 Author: Wolfgang Denk <wd@denx.de>
7257 Date: Mon May 7 22:10:36 2007 +0200
7259 Get rid of duplicated file (see include/configs/sbc8560.h instead)
7261 Signed-off-by: Wolfgang Denk <wd@denx.de>
7263 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
7264 Author: Wolfgang Denk <wd@denx.de>
7265 Date: Mon May 7 22:07:08 2007 +0200
7267 Get rid of duplicated file (see doc/README.SBC8560 instead)
7269 Signed-off-by: Wolfgang Denk <wd@denx.de>
7271 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
7272 Author: Michal Simek <monstr@monstr.eu>
7273 Date: Mon May 7 19:43:10 2007 +0200
7275 fix: read and write MSR - repair number of parameters
7277 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
7278 Author: Jeffrey Mann <mannj@embeddedplanet.com>
7279 Date: Mon May 7 19:42:49 2007 +0200
7281 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
7283 A '3' got cut off in the formatting of the last patch to automatically
7284 change the clock speed of the system clock on sequoia board.
7286 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
7287 Signed-off-by: Stefan Roese <sr@denx.de>
7289 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
7290 Author: Michal Simek <monstr@monstr.eu>
7291 Date: Mon May 7 19:33:51 2007 +0200
7293 new: fsl interrupt support
7294 FSL_Has_data is connected to INTC.
7296 commit 792032baa7d625e34c981ab6df521911bd8dc861
7297 Author: Michal Simek <monstr@monstr.eu>
7298 Date: Mon May 7 19:30:12 2007 +0200
7300 fix: interrupt handler
7303 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
7304 Author: Michal Simek <monstr@monstr.eu>
7305 Date: Mon May 7 19:25:08 2007 +0200
7307 fix: remove asm code
7309 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
7310 Author: Michal Simek <monstr@monstr.eu>
7311 Date: Mon May 7 19:12:43 2007 +0200
7313 fix: clean interrupt
7315 commit 42efed6130c8fcf7da881385b5427065d2801757
7316 Author: Michal Simek <monstr@monstr.eu>
7317 Date: Mon May 7 17:22:25 2007 +0200
7319 fix: interrupt handler for multiple sources
7321 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
7322 Author: Michal Simek <monstr@monstr.eu>
7323 Date: Mon May 7 17:11:09 2007 +0200
7325 new: add writing to msr register
7327 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
7328 Author: Markus Klotzbuecher <mk@denx.de>
7329 Date: Mon May 7 16:43:56 2007 +0200
7331 Fix an ancient CHANGELOG conflict
7333 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
7334 Author: Timur Tabi <timur@freescale.com>
7335 Date: Sat May 5 08:12:30 2007 +0200
7337 5xxx: write MAC address to mac-address and local-mac-address
7339 Some device trees have a mac-address property, some have local-mac-address,
7340 and some have both. To support all of these device trees, ftp_cpu_setup()
7341 should write the MAC address to mac-address and local-mac-address, if they
7344 Signed-off-by: Timur Tabi <timur@freescale.com>
7345 Acked-by: Grant Likely <grant.likely@secretlab.ca>
7347 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
7348 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
7349 Date: Sun Apr 29 14:01:54 2007 +0200
7351 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
7353 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
7354 message. Use PVR to distinguish between the two variants, and print proper CPU
7357 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
7358 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
7359 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7361 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
7362 Author: Ladislav Michl <ladis@linux-mips.org>
7363 Date: Wed Apr 25 16:01:26 2007 +0200
7365 [PATCH] simplify silent console
7367 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
7368 Acked-by: Stefan Roese <sr@denx.de>
7370 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
7371 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
7372 Date: Mon Apr 23 15:30:39 2007 +0200
7374 [PATCH] Avoid assigning PCI resources from zero address
7376 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
7377 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
7378 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
7379 sentence about "0" being considered an invalid address) -- so, use a reasonable
7380 starting value of 0x1000 (that's what the most Linux archs are using).
7382 Alternatively, one might have fixed the calls to pci_set_region() individually
7383 (some code even seems to have taken care of this issue) but that would have
7384 been a lot more work. :-)
7386 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
7387 Acked-by: Stefan Roese <sr@denx.de>
7389 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
7390 Author: Jeffrey Mann <mannj@embeddedplanet.com>
7391 Date: Mon Apr 23 14:00:11 2007 +0200
7393 [patch] setenv(...) can delete environmentalvariables
7395 update setenv() function so that entering a NULL value for the
7396 variable's value will delete the environmental variable
7398 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
7399 Acked-by: Stefan Roese <sr@denx.de>
7401 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
7402 Author: Mike Frysinger <vapier@gentoo.org>
7403 Date: Mon Apr 23 13:54:24 2007 +0200
7405 [patch] use unsigned char in smc91111 driver for mac
7407 the v_mac variable in the smc91111 driver is declared as a signed char ...
7408 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
7409 because when it gets printed out, you get a display like:
7410 0xFFFFFFE0 and that's no good
7412 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7414 commit ffc50f9bb194343c6303517a517708457a5eb6b8
7415 Author: Michal Simek <monstr@monstr.eu>
7416 Date: Sat May 5 18:54:42 2007 +0200
7418 new: FSL and MSR support #2
7420 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
7421 Author: Michal Simek <monstr@monstr.eu>
7422 Date: Sat May 5 18:27:16 2007 +0200
7424 new: FSL and MSR support
7426 commit 2f15278c2eb911c668b4fe562130b78cf554d139
7427 Author: Wolfgang Denk <wd@denx.de>
7428 Date: Sat May 5 18:23:11 2007 +0200
7430 Coding stylke cleanup; update CHANGELOG.
7432 Signed-off-by: Wolfgang Denk <wd@denx.de>
7434 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
7435 Author: Wolfgang Denk <wd@denx.de>
7436 Date: Sat May 5 18:05:02 2007 +0200
7438 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
7440 Signed-off-by: Wolfgang Denk <wd@denx.de>
7442 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
7443 Author: Wolfgang Denk <wd@denx.de>
7444 Date: Sat May 5 17:15:50 2007 +0200
7446 Make "file" command happy with some config.mk files; update CHANGELOG
7448 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
7449 Author: Jeffrey Mann <mannj@embeddedplanet.com>
7450 Date: Sat May 5 08:32:14 2007 +0200
7452 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
7454 The AMCC Secquoia board has been changed in a new revision from using a
7455 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
7456 indicates the difference. This patch reads that bit and uses the correct
7457 clock speed for the board. This code is backward compatable will all
7458 prior boards. All prior boards will be read as 33.000.
7460 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
7461 Signed-off-by: Stefan Roese <sr@denx.de>
7463 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
7464 Author: Stefan Roese <sr@denx.de>
7465 Date: Sat May 5 08:29:01 2007 +0200
7467 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
7469 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
7470 for the 4k NAND boot image so define bus_frequency to 133MHz here
7471 which is save for the refresh counter setup.
7473 Signed-off-by: Stefan Roese <sr@denx.de>
7475 commit 2f550ab976405300f5b07bf2890800840d0aa05f
7476 Author: Timur Tabi <timur@freescale.com>
7477 Date: Sat May 5 08:12:30 2007 +0200
7479 5xxx: write MAC address to mac-address and local-mac-address
7481 Some device trees have a mac-address property, some have local-mac-address,
7482 and some have both. To support all of these device trees, ftp_cpu_setup()
7483 should write the MAC address to mac-address and local-mac-address, if they
7486 Signed-off-by: Timur Tabi <timur@freescale.com>
7487 Acked-by: Grant Likely <grant.likely@secretlab.ca>
7489 commit a79886590593ba1d667c840caa4940c61639f18f
7490 Author: Thomas Knobloch <knobloch@siemens.com>
7491 Date: Sat May 5 07:04:42 2007 +0200
7493 NAND: Wrong calculation of page number in nand_block_bad()
7495 In case that there is no memory based bad block table available the
7496 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
7497 nand_block_bad() directly. When parameter 'getchip' is set to zero,
7498 nand_block_bad() will not right shift the offset to calculate the
7499 correct page number.
7501 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
7502 Signed-off-by: Stefan Roese <sr@denx.de>
7504 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
7505 Author: Wolfgang Denk <wd@denx.de>
7506 Date: Fri May 4 10:02:33 2007 +0200
7508 Fix initrd length corruption in bootm command.
7510 When using FDT Images, the length of an inital ramdisk was
7511 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
7513 Patches by Timur Tabi & Johns Daniel.
7515 Signed-off-by: Wolfgang Denk <wd@denx.de>
7517 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
7518 Author: Kim Phillips <kim.phillips@freescale.com>
7519 Date: Thu May 3 19:43:52 2007 -0500
7521 mpc83xx: fix trivial error in MAKEALL
7523 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7525 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
7526 Author: Wolfgang Denk <wd@denx.de>
7527 Date: Thu May 3 16:34:41 2007 +0200
7529 Update board configuration for STX GP3SSA board:
7531 Enable hush shell, environment in flash rather in EEPROM,
7532 more user-friendly default environment, etc.
7533 The simple EEPROM environment can be selected easily in the board
7536 Signed-off-by: Wolfgang Denk <wd@denx.de>
7538 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
7539 Author: Wolfgang Denk <wd@denx.de>
7540 Date: Tue Apr 24 14:37:49 2007 +0200
7542 Cleanup STX GP3SSA code; fix build and compile problems.
7544 commit 35171dc04e028ecacc23ad916a66295472555dbf
7545 Author: Dan Malek <dan@embeddedalley.com>
7546 Date: Fri Jan 5 09:15:34 2007 +0100
7548 Add support for STX GP3SSA (stxssa) Board
7550 Signed-off-by Dan Malek, <dan@embeddedalley.com>
7552 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
7553 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7554 Date: Wed May 2 13:31:53 2007 +0200
7556 macb: Don't restart autonegotiation if we already have link
7558 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
7561 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7563 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
7564 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7565 Date: Wed May 2 13:22:38 2007 +0200
7567 macb: Introduce a few barriers when dealing with DMA descriptors
7569 There were a few theoretical possibilities that the compiler might
7570 optimize away DMA descriptor reads and/or writes and thus cause
7571 synchronization problems with the hardware. Insert barriers where
7572 we depend on reads/writes actually hitting memory.
7574 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7576 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
7577 Author: Andy Fleming <afleming@freescale.com>
7578 Date: Sat Feb 24 01:08:13 2007 -0600
7580 Cleaned up some 85xx PCI bugs
7582 * Cleaned up the CDS PCI Config Tables and added NULL entries to
7584 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
7585 * Fixed 85xx PCI code to assign powar region sizes based on the
7586 config values (rather than hard-coding them)
7587 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
7589 Signed-off-by: Andy Fleming <afleming@freescale.com>
7591 commit 6743105988fc44d5b0d30388c790607835aae7a6
7592 Author: Andy Fleming <afleming@freescale.com>
7593 Date: Mon Apr 23 02:54:25 2007 -0500
7595 Add support for the 8568 MDS board
7597 This included some changes to common files:
7598 * Add 8568 processor SVR to various places
7599 * Add support for setting the qe bus-frequency value in the dts
7600 * Add the 8568MDS target to the Makefile
7602 Signed-off-by: Andy Fleming <afleming@freescale.com>
7604 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
7605 Author: David Updegraff <dave@cray.com>
7606 Date: Fri Apr 20 14:34:48 2007 -0500
7608 Add support for treating unknown PHYs as generic PHYs.
7610 When bringing up u-boot on new boards, PHY support sometimes gets
7611 neglected. Most PHYs don't really need any special support,
7612 though. By adding a generic entry that always matches if nothing
7613 else does, we can provide support for "unsupported" PHYs for the
7616 The generic PHY driver supports most PHYs, including gigabit.
7618 Signed-off-by: David Updegraff <dave@cray.com>
7619 Signed-off-by: Andy Fleming <afleming@freescale.com>
7621 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
7622 Author: James Yang <James.Yang@freescale.com>
7623 Date: Wed Feb 7 15:28:04 2007 -0600
7625 Conditionalize 8641 Rev1.0 MCM workarounds
7627 Signed-off-by: James Yang <James.Yang@freescale.com>
7628 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7630 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
7631 Author: Timur Tabi <timur@freescale.com>
7632 Date: Mon Apr 30 13:59:50 2007 -0500
7634 Fix memory initialization on MPC8349E-mITX
7636 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
7637 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
7638 on some ITX boards, notably those with a revision 3.1 CPU.
7640 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
7641 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
7643 Signed-off-by: Timur Tabi <timur@freescale.com>
7644 Acked-by: Michael Benedict <MBenedict@twacs.com>
7645 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7647 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
7648 Author: Kim Phillips <kim.phillips@freescale.com>
7649 Date: Mon Apr 30 15:26:21 2007 -0500
7651 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
7653 and fix CPU: to align with Board: display text.
7655 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7657 commit c1ab82669d9525998c34e802a12cad662723f22a
7658 Author: James Yang <James.Yang@freescale.com>
7659 Date: Fri Mar 16 13:02:53 2007 -0500
7661 Rewrote picos_to_clk() to avoid rounding errors.
7662 Clarified that conversion is to DRAM clocks rather than platform clocks.
7663 Made function static to spd_sdram.c.
7665 Signed-off-by: James Yang <James.Yang@freescale.com>
7666 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7668 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
7669 Author: Stefan Roese <sr@denx.de>
7670 Date: Sun Apr 29 14:13:01 2007 +0200
7672 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
7674 Signed-off-by: Stefan Roese <sr@denx.de>
7676 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
7677 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
7678 Date: Sun Apr 29 14:01:54 2007 +0200
7680 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
7682 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
7683 message. Use PVR to distinguish between the two variants, and print proper CPU
7686 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
7687 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
7688 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7690 commit 5c5d3242935cf3543af01142627494434834cf98
7691 Author: Kim Phillips <kim.phillips@freescale.com>
7692 Date: Wed Apr 25 12:34:38 2007 -0500
7694 mpc83xx: minor fixups for 8313rdb introduction
7696 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
7697 Author: Ladislav Michl <ladis@linux-mips.org>
7698 Date: Wed Apr 25 16:01:26 2007 +0200
7700 [PATCH] simplify silent console
7702 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
7703 Acked-by: Stefan Roese <sr@denx.de>
7705 commit 144876a380f5756f57412caf74c1d6dc201dd796
7706 Author: Michal Simek <monstr@monstr.eu>
7707 Date: Tue Apr 24 23:01:02 2007 +0200
7709 [PATCH] MTD partition support, JFFS2 support
7711 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
7712 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7713 Date: Tue Apr 24 14:03:45 2007 +0200
7715 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
7717 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7719 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
7720 Author: Andy Fleming <afleming@freescale.com>
7721 Date: Mon Apr 23 02:37:47 2007 -0500
7723 Reworked 85xx speed detection code
7725 Changed the code to read the registers and calculate the clock
7726 rates, rather than using a "switch" statement.
7728 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
7730 Signed-off-by: Andy Fleming <afleming@freescale.com>
7732 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
7733 Author: Andy Fleming <afleming@freescale.com>
7734 Date: Mon Apr 23 02:24:28 2007 -0500
7738 * Add support to the Makefile
7739 * Add 8544 configuration support to the tsec driver
7740 * Add 8544 SVR numbers to processor.h
7742 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7743 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7745 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
7746 Author: Andy Fleming <afleming@freescale.com>
7747 Date: Fri Feb 23 17:12:25 2007 -0600
7749 Support 1G size on 8548
7751 e500v2 and newer cores support 1G page sizes.
7753 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7754 Signed-off-by: Andy Fleming <afleming@freescale.com>
7756 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
7757 Author: Andy Fleming <afleming@freescale.com>
7758 Date: Fri Feb 23 17:11:16 2007 -0600
7760 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
7762 The other pagesz constants use one letter to specify order of
7763 magnitude. Also change the one reference to it in mpc8548cds/init.S
7765 Signed-off-by: Andy Fleming <afleming@freescale.com>
7767 commit 1f9a318cea14272edd10d63739e2d326c90f430e
7768 Author: Andy Fleming <afleming@freescale.com>
7769 Date: Fri Feb 23 16:28:46 2007 -0600
7771 Only set ddrioovcr for 8548 rev1.
7773 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7774 Signed-off-by: Andy Fleming <afleming@freescale.com>
7776 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
7777 Author: Andy Fleming <afleming@freescale.com>
7778 Date: Sat Feb 24 01:16:45 2007 -0600
7780 Tweak DDR ECC error counter
7782 Enable single-bit error counter when memory was cleared by ddr controller.
7784 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7785 Signed-off-by: Andy Fleming <afleming@freescale.com>
7787 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
7788 Author: Timur Tabi <timur@freescale.com>
7789 Date: Mon Feb 12 13:34:55 2007 -0600
7791 85xx: write MAC address to mac-address and local-mac-address
7793 Some device trees have a mac-address property, some have local-mac-address,
7794 and some have both. To support all of these device trees, ftp_cpu_setup()
7795 should write the MAC address to mac-address and local-mac-address, if they
7798 Signed-off-by: Timur Tabi <timur@freescale.com>
7800 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
7801 Author: Andy Fleming <afleming@freescale.com>
7802 Date: Mon Apr 23 01:44:44 2007 -0500
7804 Some 85xx cpu cleanups
7806 * Cleaned up the TSR[WIS] clearing
7807 * Cleaned up DMA initialization
7809 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7810 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7811 Acked-by: Andy Fleming <afleming@freescale.com>
7813 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
7814 Author: Andy Fleming <afleming@freescale.com>
7815 Date: Mon Apr 23 01:32:22 2007 -0500
7817 Add cpu support for the 8544
7819 Recognize new SVR values, and add a few register definitions
7821 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7822 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7823 Acked-by: Andy Fleming <afleming@freescale.com>
7825 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
7826 Author: Jon Loeliger <jdl@freescale.com>
7827 Date: Wed Apr 11 16:51:02 2007 -0500
7829 Add MPC8544DS basic port board files.
7831 Add board port under new board/freescale directory
7832 structure and reuse existing PIXIS FPGA support there.
7834 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7837 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
7838 Author: Jon Loeliger <jdl@freescale.com>
7839 Date: Wed Apr 11 16:50:57 2007 -0500
7841 Add MPC8544DS main configuration file.
7843 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7844 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7846 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
7847 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
7848 Date: Wed Dec 27 22:07:15 2006 +0300
7850 Fix PCI I/O space mapping on Freescale MPC85x0ADS
7852 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
7853 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
7854 describing the local address window used for the PCI I/O space accesses -- fix
7855 this and carry over the necessary changes into the MPC8560ADS code since the
7856 PCI I/O space mapping was also broken for this board (by the earlier commit
7857 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
7858 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
7860 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
7862 board/mpc8540ads/init.S | 4 ++--
7863 board/mpc8560ads/init.S | 4 ++--
7864 include/configs/MPC8540ADS.h | 5 ++---
7865 include/configs/MPC8541CDS.h | 2 +-
7866 include/configs/MPC8548CDS.h | 2 +-
7867 include/configs/MPC8560ADS.h | 8 ++++----
7868 6 files changed, 12 insertions(+), 13 deletions(-)
7870 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
7871 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
7872 Date: Tue Dec 5 16:42:30 2006 +0800
7874 u-boot: Fix e500 v2 core reset bug
7876 The following patch fixes the e500 v2 core reset bug.
7877 For e500 v2 core, a new reset control register is added to reset the
7880 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7882 commit 63247a5acd58032e6cf33f525bc3923b467bac88
7883 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
7884 Date: Wed Dec 20 11:01:00 2006 +0800
7886 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
7888 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
7889 entry number to control the loop. This can reduce the potential risk
7890 for the 85xx processor increasing its TLB adn LAW entry number.
7892 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
7893 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7895 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
7896 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
7897 Date: Mon Dec 18 17:01:04 2006 +0800
7899 u-boot: Fix the 85xxcds tsec bug
7901 Fix the 85xxcds tsec bug.
7902 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
7904 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7906 commit 7337b237ffc4aaf1b9467024fe472a880d852598
7907 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
7908 Date: Fri Dec 15 14:43:31 2006 +0800
7910 u-boot: Fix CPU2 errata on MPC8548CDS board
7912 This patch apply workaround of CPU2 errata on MPC8548CDS board.
7914 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
7916 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
7917 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
7918 Date: Mon Dec 18 16:25:15 2006 +0800
7920 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
7922 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
7924 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
7926 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
7927 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
7928 Date: Thu Dec 14 14:14:55 2006 +0800
7930 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
7932 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
7934 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7936 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
7937 Author: Scott Wood <scottwood@freescale.com>
7938 Date: Mon Apr 16 14:54:15 2007 -0500
7940 mpc83xx: Add MPC8313ERDB support.
7942 Signed-off-by: Scott Wood <scottwood@freescale.com>
7944 commit 49ea3b6eafe606285ae4d5c378026153dde53200
7945 Author: Scott Wood <scottwood@freescale.com>
7946 Date: Mon Apr 16 14:34:21 2007 -0500
7948 mpc83xx: Add generic PCI setup code.
7950 Board code can now request the generic setup code rather than having to
7951 copy-and-paste it for themselves. Boards should be converted to use this
7952 once they're tested with it.
7954 Signed-off-by: Scott Wood <scottwood@freescale.com>
7956 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
7957 Author: Scott Wood <scottwood@freescale.com>
7958 Date: Mon Apr 16 14:34:19 2007 -0500
7960 mpc83xx: Add 831x support to speed.c.
7962 Signed-off-by: Scott Wood <scottwood@freescale.com>
7964 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
7965 Author: Scott Wood <scottwood@freescale.com>
7966 Date: Mon Apr 16 14:34:18 2007 -0500
7968 mpc83xx: Add 831x support to global_data.h
7970 Signed-off-by: Scott Wood <scottwood@freescale.com>
7972 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
7973 Author: Scott Wood <scottwood@freescale.com>
7974 Date: Mon Apr 16 14:34:16 2007 -0500
7976 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
7978 Rather than misleadingly define PVR_83xx as the specific type of 83xx
7979 being built for, the PVR of each core revision is defined. checkcpu() now
7980 prints the core that it detects, rather than aborting if it doesn't find
7981 what it thinks it wants.
7983 Signed-off-by: Scott Wood <scottwood@freescale.com>
7985 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
7986 Author: Scott Wood <scottwood@freescale.com>
7987 Date: Mon Apr 16 14:34:15 2007 -0500
7989 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
7991 Signed-off-by: Scott Wood <scottwood@freescale.com>
7993 commit d87c57b201b4572d16f1b642998faa00c9912b16
7994 Author: Scott Wood <scottwood@freescale.com>
7995 Date: Mon Apr 16 14:31:55 2007 -0500
7997 mpc83xx: Add register definitions for MPC831x.
7999 Signed-off-by: Scott Wood <scottwood@freescale.com>
8001 commit 7fc4c71a143be8666d70803fb25ae60379c95622
8002 Author: Stefan Roese <sr@denx.de>
8003 Date: Mon Apr 23 15:39:59 2007 +0200
8007 Signed-off-by: Stefan Roese <sr@denx.de>
8009 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
8010 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
8011 Date: Mon Apr 23 15:30:39 2007 +0200
8013 [PATCH] Avoid assigning PCI resources from zero address
8015 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
8016 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
8017 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
8018 sentence about "0" being considered an invalid address) -- so, use a reasonable
8019 starting value of 0x1000 (that's what the most Linux archs are using).
8021 Alternatively, one might have fixed the calls to pci_set_region() individually
8022 (some code even seems to have taken care of this issue) but that would have
8023 been a lot more work. :-)
8025 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
8026 Acked-by: Stefan Roese <sr@denx.de>
8028 commit afb903a2eb9436baa9270ccc0c27082d86497d89
8029 Author: Jeffrey Mann <mannj@embeddedplanet.com>
8030 Date: Mon Apr 23 14:00:11 2007 +0200
8032 [patch] setenv(...) can delete environmentalvariables
8034 update setenv() function so that entering a NULL value for the
8035 variable's value will delete the environmental variable
8037 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
8038 Acked-by: Stefan Roese <sr@denx.de>
8040 commit 36f104e5caa747d568eff26b369565af57c2ffa6
8041 Author: Mike Frysinger <vapier@gentoo.org>
8042 Date: Mon Apr 23 13:54:24 2007 +0200
8044 [patch] use unsigned char in smc91111 driver for mac
8046 the v_mac variable in the smc91111 driver is declared as a signed char ...
8047 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
8048 because when it gets printed out, you get a display like:
8049 0xFFFFFFE0 and that's no good
8051 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8053 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
8054 Author: Rodolfo Giometti <giometti@enneenne.com>
8055 Date: Mon Apr 23 13:10:52 2007 +0200
8057 USB: (Another) delay for crappy USB keys.
8059 Some USB keys are slow in giving back an answer when the Root HUB
8060 enables power lines.
8062 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8064 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
8065 Author: Stefan Roese <sr@denx.de>
8066 Date: Mon Apr 23 12:00:22 2007 +0200
8068 Remove BOARDLIBS usage completely
8070 Signed-off-by: Stefan Roese <sr@denx.de>
8072 commit 32556443840f127170e4baa8bdd5b567039f6c36
8073 Author: Michal Simek <monstr@monstr.eu>
8074 Date: Sat Apr 21 21:07:22 2007 +0200
8076 [PATCH] SystemACE support for Microblaze
8078 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
8079 Author: Michal Simek <monstr@monstr.eu>
8080 Date: Sat Apr 21 21:02:40 2007 +0200
8082 16bit read/write little endian
8084 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
8085 Author: Michal Simek <monstr@monstr.eu>
8086 Date: Sat Apr 21 20:53:31 2007 +0200
8088 Change ML401 parameters - Xilinx BSP
8090 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
8091 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8092 Date: Wed Feb 28 05:37:29 2007 -0600
8094 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
8096 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8098 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
8099 Author: Zhang Wei <wei.zhang@freescale.com>
8100 Date: Fri Jan 19 10:42:37 2007 +0800
8102 Enable LAWs for MPC8641 PCI-Ex2.
8104 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8105 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8107 commit bd7851ce1e1f140665b520026abf1042968b1102
8108 Author: Jon Loeliger <jdl@freescale.com>
8109 Date: Fri Apr 20 14:12:26 2007 -0500
8111 mpc86xx; Write MAC address to mac-address and local-mac-address
8113 Some device trees have a mac-address property, some have local-mac-address,
8114 and some have both. To support all of these device trees, ftp_cpu_setup()
8115 should write the MAC address to mac-address and local-mac-address, if they
8118 Signed-off-by: Timur Tabi <timur@freescale.com>
8119 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8121 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
8122 Author: Jon Loeliger <jdl@freescale.com>
8123 Date: Fri Apr 20 14:11:38 2007 -0500
8125 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
8127 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8130 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
8131 Author: Wolfgang Denk <wd@denx.de>
8132 Date: Fri Apr 20 17:43:28 2007 +0200
8134 Cleanup compiler warnings, update CHANGELOG
8136 Signed-off-by: Wolfgang Denk <wd@denx.de>
8138 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
8139 Author: Detlev Zundel <dzu@denx.de>
8140 Date: Fri Apr 20 12:01:47 2007 +0200
8142 Fix breakage of NC650 board with respect to nand support.
8144 Signed-off-by: Detlev Zundel <dzu@denx.de>
8146 commit 39f23cd90947639ac278a18ff277ec786b5ac167
8147 Author: Domen Puncer <domen.puncer@telargo.com>
8148 Date: Fri Apr 20 11:13:16 2007 +0200
8150 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
8152 G2 core reference manual says decrementer and time base
8153 are decreasing/increasing once every 4 bus clock cycles.
8154 Lets fix it, so time in Linux won't run twice as fast
8156 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
8157 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8159 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
8160 Author: Gerald Van Baren <vanbaren@cideas.com>
8161 Date: Thu Apr 19 23:14:39 2007 -0400
8163 Fix serious pointer bug with bootm and reserve map.
8165 What was suppose to be a stack variable was declared as a pointer,
8166 overwriting random memory.
8167 Also moved the libfdt.a requirement into the main Makefile. That is
8170 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
8171 Author: Stefan Roese <sr@denx.de>
8172 Date: Thu Apr 19 09:53:52 2007 +0200
8174 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
8176 Previous versions used full wait states for the chip select #1 which
8177 is connected to the Xilinix SystemACE controller on the AMCC Katmai
8178 evaluation board. This leads to really slow access and therefore low
8179 performance. This patch now sets up the chip select a lot faster
8180 resulting in much better read/write performance of the Linux driver.
8182 Signed-off-by: Stefan Roese <sr@denx.de>
8184 commit 37837828d89084879bee2f2b8c7c68d4695940df
8185 Author: Wolfgang Denk <wd@denx.de>
8186 Date: Wed Apr 18 17:49:29 2007 +0200
8188 Clenaup, update CHANGELOG
8190 Signed-off-by: Wolfgang Denk <wd@denx.de>
8192 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
8193 Author: Wolfgang Denk <wd@denx.de>
8194 Date: Wed Apr 18 17:20:58 2007 +0200
8198 Signed-off-by: Wolfgang Denk <wd@denx.de>
8200 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
8201 Author: Wolfgang Denk <wd@denx.de>
8202 Date: Wed Apr 18 17:07:26 2007 +0200
8204 Cleanup, update CHANGELOG
8206 Sigend-off-by: Wolfgang Denk <wd@denx.de>
8208 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
8209 Author: Wolfgang Denk <wd@denx.de>
8210 Date: Wed Apr 18 16:17:46 2007 +0200
8214 commit ad4eb555671d97f96dc56eab55103b1f86874b01
8215 Author: Wolfgang Denk <wd@denx.de>
8216 Date: Wed Apr 18 14:30:39 2007 +0200
8218 MCC200 board: remove warning which is obsolete after PSoC firmware changes
8220 Signed-off-by: Wolfgang Denk <wd@denx.de>
8222 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
8223 Author: Domen Puncer <domen.puncer@telargo.com>
8224 Date: Wed Apr 18 12:11:05 2007 +0200
8226 [PATCH] icecube/lite5200b: document wakeup from low-power support
8228 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
8230 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
8231 Author: Stefan Roese <sr@denx.de>
8232 Date: Wed Apr 18 12:07:47 2007 +0200
8234 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
8236 Signed-off-by: Stefan Roese <sr@denx.de>
8238 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
8239 Author: Stefan Roese <sr@denx.de>
8240 Date: Wed Apr 18 12:05:59 2007 +0200
8242 ppc4xx: Add output for bootrom location to 405EZ ports
8244 Now 405EZ ports also show upon bootup from which boot device
8245 they are configured to boot:
8247 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
8249 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
8250 Bootstrap Option E - Boot ROM Location EBC (32 bits)
8251 16 kB I-Cache 16 kB D-Cache
8252 Board: Acadia - AMCC PPC405EZ Evaluation Board
8254 Signed-off-by: Stefan Roese <sr@denx.de>
8256 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
8257 Author: Peter Pearse <peter.pearse@arm.com>
8258 Date: Tue Apr 17 13:30:33 2007 +0100
8260 Move ppearse to ARM board list
8261 Add Konstantin Kletschke for scb9328.
8262 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
8264 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
8265 Author: Domen Puncer <domen.puncer@telargo.com>
8266 Date: Mon Apr 16 14:00:13 2007 +0200
8268 [PATCH] icecube/lite5200b: wakeup from low-power support
8270 U-Boot part of Lite5200b low power mode support.
8271 Puts SDRAM out of self-refresh and transfers control to
8272 address saved at physical 0x0.
8274 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
8275 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8277 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
8278 Author: Gerald Van Baren <vanbaren@cideas.com>
8279 Date: Sun Apr 15 13:54:26 2007 -0400
8281 Fix the ft_cpu_setup() property settings.
8283 Use "setter" functions instead of flags, cleaner and more flexible.
8284 It also fixes the problem noted by Timur Tabi that the ethernet MAC
8285 addresses were all being set incorrectly to the same MAC address.
8287 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
8288 Author: Gerald Van Baren <vanbaren@cideas.com>
8289 Date: Sat Apr 14 22:51:24 2007 -0400
8291 Improve the bootm command for CONFIG_OF_LIBFDT
8293 In bootm, create the "/chosen" node only if it doesn't already exist
8294 (better matches the previous behavior).
8295 Update for proper reserved memory map handling for initrd.
8297 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
8298 Author: Gerald Van Baren <vanbaren@cideas.com>
8299 Date: Sat Apr 14 22:46:41 2007 -0400
8301 Add some utilities to manipulate the reserved memory map.
8303 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
8304 Author: Wolfgang Denk <wd@denx.de>
8305 Date: Sat Apr 14 21:16:54 2007 +0200
8309 commit 8e6875183cdca91c134408d119d4abcd48ef6856
8310 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8311 Date: Sun Dec 17 18:56:46 2006 +0100
8313 AVR32: Enable MMC support
8315 Set up the portmux for the MMC interface and enable the MMC driver
8316 along with support for DOS partitions, ext2 and FAT filesystems.
8318 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8320 commit fc26c97bb6df41b4a95662c34054fe912387bf38
8321 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8322 Date: Fri Jan 20 10:03:53 2006 +0100
8326 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
8328 The AT91 ARM-based CPUs use basically the same hardware, so it should
8329 be possible to share this driver, but no effort has been made so far.
8331 Hardware documentation can be found in the AT32AP7000 data sheet,
8332 which can be downloaded from
8334 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
8336 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8338 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
8339 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8340 Date: Sun Dec 17 18:55:37 2006 +0100
8342 AVR32: Add clk and gpio infrastructure for mmci
8344 Implement functions for configuring the mmci pins, as well as
8345 functions for getting the clock rate of the mmci controller.
8347 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8349 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
8350 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8351 Date: Sun Dec 17 18:53:56 2006 +0100
8353 Enable partition support with MMC
8355 Include implementations of init_part() and get_partition_info() when
8358 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8360 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
8361 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8362 Date: Sun Dec 17 17:14:30 2006 +0100
8364 AVR32: Enable networking
8366 Implement MACB initialization for AVR32 and ATSTK1000, and turn
8367 everything on, including the MACB driver.
8369 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8371 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
8372 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8373 Date: Fri Jan 20 10:03:34 2006 +0100
8375 Atmel MACB ethernet driver
8377 Driver for the Atmel MACB on-chip ethernet controller.
8379 This driver has been tested on the ATSTK1000 board with a AT32AP7000
8380 CPU. It should probably work on AT91SAM926x as well with some minor
8383 Hardware documentation can be found in the AT32AP7000 data sheet,
8384 which can be downloaded from
8386 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
8388 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8390 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
8391 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8392 Date: Sun Dec 17 16:56:14 2006 +0100
8394 AVR32: Add clk and gpio infrastructure for macb0 and macb1
8396 Implement functions for configuring the macb0 and macb1 pins, as
8397 well as functions for getting the clock rate of the various
8398 busses the macb ethernet controllers are connected to.
8400 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8402 commit d5acb95b16a0a74c643524342c3437e765426d05
8403 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8404 Date: Sun Dec 17 15:39:15 2006 +0100
8406 AVR32: Implement simple DMA memory allocator
8408 Implement dma_alloc_coherent() which returns cache-aligned
8411 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8413 commit 91975b0fea773c9e681fea8cf3349669f27685ee
8414 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8415 Date: Sun Dec 17 15:46:02 2006 +0100
8417 Import <linux/mii.h> from the Linux kernel
8419 Instead of creating yet another set of MII register definitions
8420 in the macb driver, here's a complete set of definitions for everyone
8423 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8425 commit 1b804b229556a4d862da93c0ec94e79419364b2c
8426 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8427 Date: Wed Mar 21 19:47:36 2007 +0100
8429 AVR32: Include more commands for ATSTK1000
8431 Include the imi, imls and jffs commands sets by default on ATSTK1000.
8432 Also define CONFIG_BOOTARGS to something more useful, define
8433 CONFIG_BOOTCOMMAND and enable autoboot by default.
8435 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8437 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
8438 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8439 Date: Wed Mar 21 19:44:48 2007 +0100
8441 AVR32: Provide a definition of struct stat
8443 Copy the definition of struct stat from the Linux kernel.
8445 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8447 commit 12f099c08167a7a51aeee623bc16dafd0841271c
8448 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8449 Date: Sun Dec 17 14:46:06 2006 +0100
8451 AVR32: Use initdram() instead of board_init_memories()
8453 Conform to the "standard" interface and use initdram() instead of
8454 board_init_memories() on AVR32. This enables us to get rid of the
8455 sdram_size member of the global_data struct as well.
8457 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8459 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
8460 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8461 Date: Mon Nov 20 15:53:10 2006 +0100
8463 AVR32: Relocate u-boot to SDRAM
8465 Relocate the u-boot image into SDRAM like everyone else does. This
8466 means that we can handle much larger .data and .bss than we used to.
8468 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8470 commit df548d3c3e2bbc40258713167859ffc2ce99a900
8471 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8472 Date: Sun Nov 19 18:06:53 2006 +0100
8474 AVR32: Resource management rewrite
8476 Rewrite the resource management code (i.e. I/O memory, clock gating,
8477 gpio) so it doesn't depend on any global state. This is necessary
8478 because this code is heavily used before relocation to RAM, so we
8479 can't write to any global variables.
8481 As an added bonus, this makes u-boot's memory footprint a bit smaller,
8482 although some functionality has been left out; all clocks are enabled
8483 all the time, and there's no checking for gpio line conflicts.
8485 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8487 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
8488 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8489 Date: Sat Nov 18 18:01:13 2006 +0100
8491 AVR32: Clean up memory-map.h for at32ap7000
8493 Convert spaces to tabs (must have missed this one last time around),
8494 sort the entries by address and group them together by bus
8497 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8499 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
8500 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8501 Date: Sat Nov 18 17:32:31 2006 +0100
8503 AVR32: Build position-independent u-boot
8505 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
8506 position independent. This will make relocation a lot easier.
8508 -mno-init-got means that gcc shouldn't emit code to load the GOT
8509 address into r6 in every function prologue. We do it once and for
8510 all in the early startup assembly code, so enabling this option
8511 makes u-boot a bit faster and smaller.
8513 The assembly parts have always been position-independent, so no code
8514 changes should be necessary.
8516 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8518 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
8519 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8520 Date: Sat Nov 18 17:24:31 2006 +0100
8522 AVR32: Use avr32-linux- cross-compilation prefix by default
8524 It doesn't really matter which toolchain you use to compile u-boot,
8525 but the avr32-linux one is probably what most people have installed.
8527 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8529 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
8530 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8531 Date: Sat Nov 18 17:15:30 2006 +0100
8533 AVR32: Split start_u_boot into board_init_f and board_init_r
8535 Split the avr32 initialization code into a function to run before
8536 relocation, board_init_f and a function to run after relocation,
8537 board_init_r. For now, board_init_f simply calls board_init_r
8540 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8542 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
8543 Author: Heiko Schocher <hs@pollux.denx.de>
8544 Date: Sat Apr 14 05:26:48 2007 +0200
8546 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
8547 clear the Display after reset.
8549 Signed-off-by: Heiko Schocher <hs@denx.de>
8551 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
8552 Author: Denis Peter <d.peter@mpl.ch>
8553 Date: Fri Apr 13 09:13:33 2007 +0200
8555 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
8557 Fix bug introduced by "Fix get_partition_info() parameter error in all
8558 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
8559 to use diskboot or scsiboot form another device than 0.
8561 Signed-off-by: Denis Peter <d.peter@mpl.ch>
8563 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
8564 Author: Greg Lopp <lopp@pobox.com>
8565 Date: Fri Apr 13 08:02:24 2007 +0200
8567 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
8569 Signed-of-by: Greg Lopp <lopp@pobox.com>
8570 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8572 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
8573 Author: Xie Xiaobo <r63061@freescale.com>
8574 Date: Fri Mar 9 19:08:25 2007 +0800
8576 Fix two bugs for MPC83xx DDR2 controller SPD Init
8578 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
8579 the first bug is that the picos_to_clk routine introduces a huge
8580 rounding error in 83xx.
8581 the second bug is that the mode register write recovery field is
8582 tWR-1, not tWR >> 1.
8584 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
8585 Author: Jeffrey Mann <mannj@embeddedplanet.com>
8586 Date: Thu Apr 12 14:15:59 2007 +0200
8588 ppc4xx: Fix i2c divisor calcularion for PPC4xx
8590 This patch fixes changes the i2c_init(...) function to use the function
8591 get_OPB_freq() rather than calculating the OPB speed by
8592 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
8593 specific per processor. The prior method was not and so was calculating
8594 the wrong speed for some PPC4xx processors.
8596 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
8597 Signed-off-by: Stefan Roese <sr@denx.de>
8599 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
8600 Author: Wolfgang Denk <wd@denx.de>
8601 Date: Wed Apr 11 17:25:01 2007 +0200
8605 Signed-off-by: Wolfgang Denk <wd@denx.de>
8607 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
8608 Author: Wolfgang Denk <wd@denx.de>
8609 Date: Wed Apr 11 17:22:55 2007 +0200
8611 Update for SC3 board
8613 * Make IDE timeout configurable through ide_reset_timeout variable.
8614 * Use Newline as "password" string
8615 * Use just a single partition in NAND flash
8617 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
8618 Author: Haiying Wang <haiying.wang@freescale.com>
8619 Date: Mon Jan 22 12:37:30 2007 -0600
8621 Add PIXIS FPGA support for MPC8641HPCN board.
8623 Move the 8641HPCN's PIXIS code to the new directory
8624 board/freescale/common/ as it will be shared by
8625 future boards not in the same processor family.
8627 Write a "pixis_reset" command that utilizes the FPGA
8628 reset sequencer to support alternate soft-reset options
8629 such as using the "alternate" flash bank, enabling
8630 the watch dog, or choosing different CPU frequencies.
8632 Add documentation for the pixis_reset to README.mpc8641hpcn.
8634 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
8635 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8637 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
8638 Author: Gerald Van Baren <vanbaren@cideas.com>
8639 Date: Fri Apr 6 14:19:43 2007 -0400
8641 Moved fdt command support code to fdt_support.c
8643 ...in preparation for improving the bootm command's handling of fdt blobs.
8644 Also cleaned up some coding sloppiness.
8646 commit 6679f9299534e488a171a9bb8f9bb891de247aab
8647 Author: Gerald Van Baren <vanbaren@cideas.com>
8648 Date: Fri Apr 6 14:17:14 2007 -0400
8650 libfdt: Make fdt_check_header() public
8652 Changed _fdt_check_header() to fdt_check_header() and made it part of
8653 the interface - it is a useful routine.
8655 Also did some asthetics cleanup to the include files (headers).
8657 commit c0707ce65677650b5ceab0500ee50ae5168afef2
8658 Author: Aubrey Li <aubrey.adi@gmail.com>
8659 Date: Thu Apr 5 18:34:06 2007 +0800
8661 [Blackfin][PATCH] Kill off a bunch of common local prototypes
8663 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
8664 Author: Aubrey Li <aubrey.adi@gmail.com>
8665 Date: Thu Apr 5 18:33:04 2007 +0800
8667 [Blackfin][PATCH] Fix dynamic CPLB generation issue
8669 commit 0445e3a264251d75b1be45ef713c70726a2952f0
8670 Author: Aubrey Li <aubrey.adi@gmail.com>
8671 Date: Thu Apr 5 18:31:47 2007 +0800
8673 [Blackfin][PATCH] minior cleanup
8675 commit 155fd766573981090e638b493d5857562151862e
8676 Author: Aubrey Li <aubrey.adi@gmail.com>
8677 Date: Thu Apr 5 18:31:18 2007 +0800
8679 [Blackfin][PATCH] Fix copyright and update license
8681 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
8682 Author: Aubrey Li <aubrey.adi@gmail.com>
8683 Date: Thu Apr 5 18:30:25 2007 +0800
8685 [Blackfin][PATCH] Add BF537 EMAC driver initialization
8687 commit 889256e8604e0c68db1d866d720894dffede9df6
8688 Author: Aubrey Li <aubrey.adi@gmail.com>
8689 Date: Thu Apr 5 18:29:55 2007 +0800
8691 [Blackfin][PATCH] call real the system synchronize instruction
8693 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
8694 Author: Aubrey Li <aubrey.adi@gmail.com>
8695 Date: Thu Apr 5 18:29:17 2007 +0800
8697 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
8699 commit dfeeab2cd680df047e68e723b246adf6f33bb556
8700 Author: Aubrey Li <aubrey.adi@gmail.com>
8701 Date: Thu Apr 5 18:28:34 2007 +0800
8703 [Blackfin][PATCH]: fix flash unaligned copy issue
8705 commit 443feb740584e406efa203af909fe2926608e8d5
8706 Author: Igor Marnat <marny@rambler.ru>
8707 Date: Wed Mar 21 09:55:01 2007 +0300
8709 Update usage of 'nc' in README.NetConsole
8711 Added information about usage of NetConsole on systems where the -l and -p
8712 switches are mutually exclusive.
8714 Signed-off-by: Igor Marnat <marny@rambler.ru>
8715 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8717 commit 31c98a88228021b314c89ebb8104fb6473da4471
8718 Author: Wolfgang Denk <wd@denx.de>
8719 Date: Wed Apr 4 02:09:30 2007 +0200
8721 Minor coding style cleanup.
8723 commit 94abd7c0583ebe01e799b25f451201deeaab550d
8724 Author: Wolfgang Denk <wd@denx.de>
8725 Date: Wed Apr 4 01:49:15 2007 +0200
8729 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
8730 Author: Rodolfo Giometti <giometti@enneenne.com>
8731 Date: Tue Apr 3 14:27:18 2007 +0200
8733 Support for the Philips ISP116x HCD (Host Controller Driver)
8735 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
8737 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
8738 Author: Markus Klotzbuecher <mk@denx.de>
8739 Date: Tue Apr 3 14:27:08 2007 +0200
8741 USB: cleanup monahans usb support. Remove dead code.
8743 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8745 commit a65c5768e5537530bd1780af3d3fddc3113a163c
8746 Author: Stefan Roese <sr@denx.de>
8747 Date: Mon Apr 2 10:09:30 2007 +0200
8749 ppc4xx: Change SysACE address on Katmai
8751 With this new base address of the Xilinx SystemACE controller
8752 the Linux driver will be easier to adapt, since it can now be
8753 mapped via the "normal" ioremap() call.
8755 Signed-off-by: Stefan Roese <sr@denx.de>
8757 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
8758 Author: Gerald Van Baren <vanbaren@cideas.com>
8759 Date: Sat Mar 31 14:30:53 2007 -0400
8761 Fix some minor whitespace violations.
8763 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
8764 Author: Gerald Van Baren <vanbaren@cideas.com>
8765 Date: Sat Mar 31 12:23:51 2007 -0400
8767 Add a flattened device tree (fdt) command (2 of 2)
8769 Modifications to the existing code to support the new fdt command.
8771 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
8772 Author: Gerald Van Baren <vanbaren@cideas.com>
8773 Date: Sat Mar 31 12:22:10 2007 -0400
8775 Add a flattened device tree (fdt) command (1 of 2)
8777 The fdt command uses David Gibson's libfdt library to manipulate as well
8778 as print the flattened device tree. This patch is the new command,
8779 the second part is the modifications to the existing code.
8781 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
8782 Author: Gerald Van Baren <vanbaren@cideas.com>
8783 Date: Sat Mar 31 12:13:43 2007 -0400
8785 libfdt: Enhanced and published fdt_next_tag()
8787 Enhanced the formerly private function _fdt_next_tag() to allow stepping
8788 through the tree, used to produce a human-readable dump, and made
8789 it part of the published interface.
8790 Also added some comments.
8792 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
8793 Author: Gerald Van Baren <vanbaren@cideas.com>
8794 Date: Sat Mar 31 12:05:39 2007 -0400
8796 libfdt: Customizations for use by u-boot.
8798 Changes to David Gibson's original source to fit into u-boot's
8799 environment. No functionality changes.
8801 commit 35748177c64a4a83a00057e93bb33e40278a2a96
8802 Author: Gerald Van Baren <vanbaren@cideas.com>
8803 Date: Sat Mar 31 12:00:56 2007 -0400
8805 libfdt: Import libfdt source (2 of 2)
8807 This adds the applicable libfdt source files (unmodified) and a README
8808 to explain where the source came from.
8810 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
8811 Author: Gerald Van Baren <vanbaren@cideas.com>
8812 Date: Sat Mar 31 11:59:59 2007 -0400
8814 libfdt: Import libfdt source (1 of 2)
8816 This adds the applicable libfdt source files (unmodified) and a README
8817 to explain where the source came from.
8819 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
8820 Author: Stefan Roese <sr@denx.de>
8821 Date: Sat Mar 31 13:16:23 2007 +0200
8823 ppc4xx: Update Katmai bootstrap command
8825 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
8828 Signed-off-by: Stefan Roese <sr@denx.de>
8830 commit cabee756a6532986729477c3cc1ea16ef8517ad2
8831 Author: Stefan Roese <sr@denx.de>
8832 Date: Sat Mar 31 13:15:06 2007 +0200
8834 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
8836 Additional RAM information is now printed upon powerup, like
8837 DDR2 frequency and CAS latency.
8839 Signed-off-by: Stefan Roese <sr@denx.de>
8841 commit 60723803431ac75cad085690789e433d5ab9174e
8842 Author: Stefan Roese <sr@denx.de>
8843 Date: Sat Mar 31 08:48:36 2007 +0200
8845 ppc4xx: Change Yucca config file to support ECC
8847 With the updated 44x DDR2 driver the Yucca board now supports
8848 ECC generation and checking.
8850 Signed-off-by: Stefan Roese <sr@denx.de>
8852 commit 490e5730c674b20d708b783a2c5ffd7208f83873
8853 Author: Stefan Roese <sr@denx.de>
8854 Date: Sat Mar 31 08:47:34 2007 +0200
8856 ppc4xx: Fix "bootstrap" command for Katmai board
8858 The board specific "bootstrap" command is now fixed and can
8859 be used for the AMCC Katmai board to configure different
8860 CPU/PLB/OPB frequencies.
8862 Signed-off-by: Stefan Roese <sr@denx.de>
8864 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
8865 Author: Stefan Roese <sr@denx.de>
8866 Date: Sat Mar 31 08:46:08 2007 +0200
8868 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
8870 Fix a bug in the auto calibration routine. This driver now runs
8871 more reliable with the tested modules. It's also tested with
8872 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
8874 Signed-off-by: Stefan Roese <sr@denx.de>
8876 commit 342cd097be1e7affe82f42ab3da220959a699e64
8877 Author: Michal Simek <monstr@monstr.eu>
8878 Date: Fri Mar 30 22:52:09 2007 +0200
8880 [PATCH] Clean include dependence
8882 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
8883 Author: Michal Simek <monstr@monstr.eu>
8884 Date: Fri Mar 30 22:42:45 2007 +0200
8886 [CLEAN] Remove inefficient Suzaku code
8888 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
8889 Author: Stefan Roese <sr@denx.de>
8890 Date: Wed Mar 28 15:03:16 2007 +0200
8892 Merge some AMCC make targets to keep the top-level Makefile smaller
8894 Signed-off-by: Stefan Roese <sr@denx.de>
8896 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
8897 Author: Stefan Roese <sr@denx.de>
8898 Date: Wed Mar 28 14:52:12 2007 +0200
8900 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
8902 The "old" i2c commands (iprobe, imd...) are now compiled in again,
8903 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
8906 Signed-off-by: Stefan Roese <sr@denx.de>
8908 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
8909 Author: Michal Simek <monstr@monstr.eu>
8910 Date: Tue Mar 27 00:32:16 2007 +0200
8912 PATCH: Resolve GPL license problem
8914 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
8915 Author: Rodolfo Giometti <giometti@enneenne.com>
8916 Date: Mon Mar 26 12:03:36 2007 +0200
8918 PXA: pxa27x USB OHCI support
8920 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8922 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
8923 Author: Markus Klotzbuecher <mk@denx.de>
8924 Date: Mon Mar 26 11:21:05 2007 +0200
8926 USB: remove the S3C24X0_merge #define, which was introduced while
8927 merging OHCI drivers.
8929 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8931 commit 1798049522f594013aea29457d46794298c6ae15
8932 Author: Michal Simek <root@monstr.eu>
8933 Date: Mon Mar 26 01:39:07 2007 +0200
8935 Support for XUPV2P board
8937 BSP autoconfig support
8939 commit 0d974d5297349504a2ddfa09314be573b5df320a
8940 Author: Stefan Roese <sr@denx.de>
8941 Date: Sat Mar 24 15:57:09 2007 +0100
8943 [PATCH] Add 4xx GPIO functions
8945 This patch adds some 4xx GPIO functions. It also moves some of the
8946 common code and defines into a common 4xx GPIO header file.
8948 Signed-off-by: Stefan Roese <sr@denx.de>
8950 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
8951 Author: Stefan Roese <sr@denx.de>
8952 Date: Sat Mar 24 15:55:58 2007 +0100
8954 [PATCH] Small Sequoia cleanup
8956 Signed-off-by: Stefan Roese <sr@denx.de>
8958 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
8959 Author: Stefan Roese <sr@denx.de>
8960 Date: Sat Mar 24 15:45:34 2007 +0100
8962 [PATCH] Clean up 40EZ/Acadia support
8964 This patch cleans up all the open issue of the preliminary
8967 Signed-off-by: Stefan Roese <sr@denx.de>
8969 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
8970 Author: Jon Loeliger <jdl@freescale.com>
8971 Date: Tue Dec 12 11:02:20 2006 -0600
8973 Fix 8641HPCN problem with ld version 2.16
8975 (Dot outside sections problem).
8977 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
8979 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8981 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
8982 Author: Haiying Wang <haiying.wang@freescale.com>
8983 Date: Thu Dec 7 10:35:55 2006 -0600
8985 Set Rev 2.x 86xx PIC in mixed mode.
8987 Prevent false interrupt from hanging Linux as MSR[EE] is set
8988 to enable interrupts by changing the PIC out of the default
8989 pass through mode into mixed mode.
8991 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
8992 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8994 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
8995 Author: Jason Jin <jason.jin@freescale.com>
8996 Date: Thu Dec 7 10:32:35 2006 -0600
8998 Add flash cmd function to 8641HPCN ramboot
9000 Also fixes some commmand for 8641 HPCN ramboot case.
9002 Signed-off-by: Jason Jin <jason.jin@freescale.com>
9003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9005 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
9006 Author: Ed Swarthout <ed.swarthout@freescale.com>
9007 Date: Thu Dec 7 10:34:14 2006 -0600
9009 Add support for 8641 Rev 2 silicon.
9011 Without this patch, I am unable to get to the prompt on rev 2 silicon.
9012 Only set ddrioovcr for rev1.
9014 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
9015 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9017 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
9018 Author: Wolfgang Denk <wd@denx.de>
9019 Date: Thu Mar 22 00:13:12 2007 +0100
9021 Code cleanup / re-insert previous Copyright entries.
9023 Signed-off-by: Wolfgang Denk <wd@denx.de>
9025 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
9026 Author: Wolfgang Denk <wd@denx.de>
9027 Date: Wed Mar 21 23:26:15 2007 +0100
9029 Code cleanup. Update CHANGELOG
9031 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
9032 Author: Stefan Roese <sr@denx.de>
9033 Date: Wed Mar 21 14:54:29 2007 +0100
9035 ppc4xx: Fix file mode of include/configs/acadia.h
9037 Signed-off-by: Stefan Roese <sr@denx.de>
9039 commit d5f4614c9350d9333e575100fb250aab774d0258
9040 Author: Markus Klotzbuecher <mk@denx.de>
9041 Date: Wed Mar 21 14:41:46 2007 +0100
9043 SPC1920: fix small clock routing bug
9045 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9047 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
9048 Author: Stefan Roese <sr@denx.de>
9049 Date: Wed Mar 21 13:39:57 2007 +0100
9051 [PATCH] Add AMCC Acadia (405EZ) eval board support
9053 This patch adds support for the new AMCC Acadia eval board.
9055 Please note that this Acadia/405EZ support is still in a beta stage.
9056 Still lot's of cleanup needed but we need a preliminary release now.
9058 Signed-off-by: Stefan Roese <sr@denx.de>
9060 commit e01bd218b00af73499331a1a701625a852cd286f
9061 Author: Stefan Roese <sr@denx.de>
9062 Date: Wed Mar 21 13:38:59 2007 +0100
9064 [PATCH] Add AMCC PPC405EZ support
9066 This patch adds support for the new AMCC 405EZ PPC. It is in
9067 preparation for the AMCC Acadia board support.
9069 Please note that this Acadia/405EZ support is still in a beta stage.
9070 Still lot's of cleanup needed but we need a preliminary release now.
9072 Signed-off-by: Stefan Roese <sr@denx.de>
9074 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
9075 Author: Heiko Schocher <hs@pollux.denx.de>
9076 Date: Wed Mar 21 08:45:17 2007 +0100
9078 [PATCH] TQM8272: dont change the bits given from the HRCW
9079 for the SIUMCR and BCR Register.
9080 Fix the calculation for the EEprom Size
9082 Signed-off-by: Heiko Schocher <hs@denx.de>
9084 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
9085 Author: Aubrey Li <aubrey.adi@gmail.com>
9086 Date: Tue Mar 20 18:16:24 2007 +0800
9088 [Blackfin][PATCH] Add BF561 EZKIT board support
9090 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
9091 Author: Aubrey Li <aubrey.adi@gmail.com>
9092 Date: Mon Mar 19 22:55:58 2007 +0800
9094 [Blackfin][PATCH] minor cleanup
9096 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
9097 Author: Wolfgang Denk <wd@denx.de>
9098 Date: Mon Mar 19 13:10:08 2007 +0100
9100 Remove obsoleted POST files.
9102 Signed-off-by: Wolfgang Denk <wd@denx.de>
9104 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
9105 Author: Aubrey Li <aubrey.adi@gmail.com>
9106 Date: Mon Mar 19 01:26:11 2007 +0800
9108 [PATCH] Add flash chip M29W320ET/B support
9110 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
9111 Author: Aubrey Li <aubrey.adi@gmail.com>
9112 Date: Mon Mar 19 01:24:52 2007 +0800
9114 [Blackfin][PATCH] Add BF537 stamp board support
9116 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
9117 Author: Stefan Roese <sr@denx.de>
9118 Date: Fri Mar 16 21:11:42 2007 +0100
9120 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
9122 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
9123 DDR memory are dynamically programmed matching the total size
9124 of the equipped memory (DIMM modules).
9126 Signed-off-by: Stefan Roese <sr@denx.de>
9128 commit 76d1466f918b881cda2d259254761e73885093c2
9129 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9130 Date: Tue Mar 13 13:38:05 2007 +0100
9132 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
9133 boards in terms of unification.
9135 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9137 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
9138 Author: Wolfgang Denk <wd@denx.de>
9139 Date: Tue Mar 13 16:05:55 2007 +0100
9141 Make SC3 board build with 'make O='; use 'addcons' consistently
9142 (SC3 and Jupiter used to use 'addcon' instead).
9144 Signed-off-by: Wolfgang Denk wd@denx.de
9146 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
9147 Author: Heiko Schocher <hs@pollux.denx.de>
9148 Date: Tue Mar 13 09:40:59 2007 +0100
9150 [PATCH] update board config for jupiter Board:
9152 CONFIG_CMDLINE_EDITING,
9153 CFG_ENV_ADDR_REDUND activated
9155 Signed-off-by: Heiko Schocher <hs@denx.de>
9157 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
9158 Author: Aubrey Li <aubrey.adi@gmail.com>
9159 Date: Mon Mar 12 12:11:55 2007 +0800
9161 [Blackfin][PATCH] minor cleanup
9163 commit bfa5754a58477ac917d21527cd0f079d87cf188e
9164 Author: Aubrey Li <aubrey.adi@gmail.com>
9165 Date: Mon Mar 12 01:42:06 2007 +0800
9167 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
9169 commit 8440bb14581a294375c34b91b42512f9753d1130
9170 Author: Aubrey Li <aubrey.adi@gmail.com>
9171 Date: Mon Mar 12 00:25:14 2007 +0800
9173 [Blackfin][PATCH] code cleanup
9175 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
9176 Author: Michal Simek <monstr@monstr.eu>
9177 Date: Sun Mar 11 13:48:24 2007 +0100
9179 [Microblaze][PATCH] part 2
9181 interrupt controller support
9185 board information support
9187 booting image support
9189 adding support for Xilinx ML401
9191 commit 76316a318de91f6184e7c22a10e02d275ade2441
9192 Author: Michal Simek <monstr@monstr.eu>
9193 Date: Sun Mar 11 13:42:58 2007 +0100
9197 interrupt controller support
9201 board information support
9203 booting image support
9205 adding support for Xilinx ML401
9207 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
9208 Author: Aubrey Li <aubrey.adi@gmail.com>
9209 Date: Sat Mar 10 23:49:29 2007 +0800
9211 [Blackfin][PATCH] code cleanup
9213 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
9214 Author: Aubrey.Li <aubrey.adi@gmail.com>
9215 Date: Fri Mar 9 13:40:56 2007 +0800
9217 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
9219 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
9220 Author: Aubrey.Li <aubrey.adi@gmail.com>
9221 Date: Fri Mar 9 13:38:44 2007 +0800
9223 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
9225 commit 992423ab43c2bcf6b704853bd00af77450915e20
9226 Author: Stefan Roese <sr@denx.de>
9227 Date: Thu Mar 8 23:00:08 2007 +0100
9229 ppc4xx: Fix file mode of sequoia.c
9231 Signed-off-by: Stefan Roese <sr@denx.de>
9233 commit eb92f613556800f7483666db09d9a237ad911d4a
9234 Author: Wolfgang Denk <wd@pollux.denx.de>
9235 Date: Thu Mar 8 22:52:51 2007 +0100
9239 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
9240 Author: John Otken john@softadvances.com <john@softadvances.com>
9241 Date: Thu Mar 8 09:39:48 2007 -0600
9243 ppc4xx: Clear Sequoia/Rainier security engine reset bits
9245 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
9247 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
9248 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9249 Date: Thu Mar 8 16:26:52 2007 +0100
9251 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
9253 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9255 commit d9fc703246840c4b268debf48c334ba55c597dc0
9256 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9257 Date: Thu Mar 8 16:25:47 2007 +0100
9259 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
9261 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9263 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
9264 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9265 Date: Thu Mar 8 16:23:11 2007 +0100
9267 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
9269 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9271 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
9272 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9273 Date: Thu Mar 8 16:20:32 2007 +0100
9275 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
9277 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9279 commit f9fc6a5852a6335840882fa2111925010eea1abe
9280 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9281 Date: Wed Mar 7 15:32:01 2007 +0100
9283 fixed ethernet phy configuration for plu405 board
9285 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9287 commit 769104c9356594deb2092e204a39c05b33202d6c
9288 Author: Wolfgang Denk <wd@pollux.denx.de>
9289 Date: Thu Mar 8 21:49:27 2007 +0100
9293 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
9294 Author: Stefan Roese <sr@denx.de>
9295 Date: Thu Mar 8 10:13:16 2007 +0100
9297 [PATCH] Update AMCC Luan 440SP eval board support
9299 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
9300 inititializition. This includes DDR auto calibration and support
9301 for different DIMM modules, instead of the fixed setup used in
9302 the earlier version.
9304 This patch also enables the cache in FLASH for the startup
9305 phase of U-Boot (while running from FLASH). After relocating to
9306 SDRAM the cache is disabled again. This will speed up the boot
9307 process, especially the SDRAM setup, since there are some loops
9308 for memory testing (auto calibration).
9310 Signed-off-by: Stefan Roese <sr@denx.de>
9312 commit 2f5df47351910a2936c7741cf111855829200943
9313 Author: Stefan Roese <sr@denx.de>
9314 Date: Thu Mar 8 10:10:18 2007 +0100
9316 [PATCH] Update AMCC Yucca 440SPe eval board support
9318 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
9319 inititializition. This includes DDR auto calibration and support
9320 for different DIMM modules, instead of the fixed setup used in
9321 the earlier version.
9323 Signed-off-by: Stefan Roese <sr@denx.de>
9325 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
9326 Author: Stefan Roese <sr@denx.de>
9327 Date: Thu Mar 8 10:07:18 2007 +0100
9329 ppc4xx: Small AMCC Katmai 440SPe update
9331 Signed-off-by: Stefan Roese <sr@denx.de>
9333 commit df294497479b1dca6dd86318b2a912f72fede0df
9334 Author: Stefan Roese <sr@denx.de>
9335 Date: Thu Mar 8 10:06:09 2007 +0100
9337 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
9339 Signed-off-by: Stefan Roese <sr@denx.de>
9341 commit 83853178bd36bca6f0f8f1331476620c84a587fc
9342 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9343 Date: Wed Mar 7 12:14:50 2007 -0600
9345 net - Support ping reply when processing net-loop
9347 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
9349 This permits the ping command to test the phy interface when the phy
9350 is put in loopback mode (typically by setting register 0 bit 14).
9352 It also allows the port to respond to an external ping when u-boot is
9353 processing some other net command (such as tftp). This is useful when
9354 tftp appears to hang.
9356 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9357 Signed-off-by: Ben Warren <bwarren@qstreams.com>
9359 commit fa1aef15bcd47736687be1af544506e90fba545d
9360 Author: Stefan Roese <sr@denx.de>
9361 Date: Wed Mar 7 16:43:00 2007 +0100
9363 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
9365 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
9366 DDR memory are dynamically programmed matching the total size
9367 of the equipped memory (DIMM modules).
9369 Signed-off-by: Stefan Roese <sr@denx.de>
9371 commit e2ebe696818939e2b974628be9c921ea3fe9de13
9372 Author: Stefan Roese <sr@denx.de>
9373 Date: Wed Mar 7 16:39:36 2007 +0100
9375 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
9377 This patch fixes a problem that occurs when 2 DIMM's are
9378 used. This problem was first spotted and fixed by Gerald Jackson
9379 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
9380 problem in a little more clever way.
9382 This patch also adds the nice functionality to dynamically
9383 create the TLB entries for the SDRAM (tlb.c). So we should
9384 never run into such problems with wrong (too short) TLB
9385 initialization again on these platforms.
9387 As this feature is new to the "old" 44x SPD DDR driver, it
9388 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
9390 Signed-off-by: Stefan Roese <sr@denx.de>
9392 commit 39218433983417b9df087976a79e3f80dd5e83d6
9393 Author: Wolfgang Denk <wd@denx.de>
9394 Date: Wed Mar 7 16:33:44 2007 +0100
9396 UC101: fix compiler warnings
9398 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
9399 Author: Wolfgang Denk <wd@pollux.denx.de>
9400 Date: Wed Mar 7 16:19:46 2007 +0100
9402 HMI1001: fix build error, cleanup compiler warnings.
9404 commit ad5bb451ade552c44bef9119d907929ebc2c126f
9405 Author: Wolfgang Denk <wd@pollux.denx.de>
9406 Date: Tue Mar 6 18:08:43 2007 +0100
9408 Restructure POST directory to support of other CPUs, boards, etc.
9410 commit a5284efd125967675b2e9c6ef7b95832268ad360
9411 Author: Wolfgang Denk <wd@pollux.denx.de>
9412 Date: Tue Mar 6 18:01:47 2007 +0100
9414 Fix HOSTARCH handling.
9415 Patch by Mike Frysinger, Mar 05 2007
9417 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
9418 Author: Stefan Roese <sr@denx.de>
9419 Date: Tue Mar 6 07:47:04 2007 +0100
9421 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
9423 As provided by the AMCC applications team, this patch optimizes the
9424 DDR2 setup for 166MHz bus speed. The values provided are also save
9425 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
9426 setup has to be adjusted as done in this patch.
9428 For this the NAND booting version had to include the "speed.c" file
9429 from the cpu/ppc4xx directory. With this addition the NAND SPL image
9430 will just fit into the 4kbytes of program space. gcc version 4.x as
9431 provided with ELDK 4.x is needed to generate this optimized code.
9433 Signed-off-by: Stefan Roese <sr@denx.de>
9435 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
9436 Author: Wolfgang Denk <wd@pollux.denx.de>
9437 Date: Sun Mar 4 01:36:05 2007 +0100
9441 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
9442 Author: Kim Phillips <kim.phillips@freescale.com>
9443 Date: Wed Feb 28 00:02:04 2007 -0600
9445 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
9447 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
9449 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
9450 Author: Kumar Gala <galak@kernel.crashing.org>
9451 Date: Tue Feb 27 23:51:42 2007 -0600
9453 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
9455 The config value for:
9463 Were not being used when setting the appropriate register
9471 To allow full config of the SCCR.
9473 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
9474 that were just bogus.
9476 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9478 commit d51b3cf371cd441030460ef19d36b2924c361b1a
9479 Author: Kim Phillips <kim.phillips@freescale.com>
9480 Date: Thu Feb 22 20:06:57 2007 -0600
9482 mpc83xx: update [local-]mac-address properties on UEC based devices
9484 8360 and 832x weren't updating their [local-]mac-address
9485 properties. This patch fixes that.
9487 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9489 commit 61f4f912acbe60776c5e00df1ec94094ce672957
9490 Author: Timur Tabi <timur@freescale.com>
9491 Date: Tue Feb 13 10:41:42 2007 -0600
9493 mpc83xx: write MAC address to mac-address and local-mac-address
9495 Some device trees have a mac-address property, some have local-mac-address,
9496 and some have both. To support all of these device trees, this patch
9497 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
9498 This function already updates local-mac-address.
9500 Signed-off-by: Timur Tabi <timur@freescale.com>
9502 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
9503 Author: Kim Phillips <kim.phillips@freescale.com>
9504 Date: Tue Feb 27 18:41:08 2007 -0600
9506 mpc83xx: add command line editing by default
9508 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
9509 Author: Kim Phillips <kim.phillips@freescale.com>
9510 Date: Wed Feb 14 19:50:53 2007 -0600
9512 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
9514 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
9515 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
9517 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
9519 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9520 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
9522 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
9523 Author: Xie Xiaobo <r63061@freescale.com>
9524 Date: Wed Feb 14 18:27:17 2007 +0800
9526 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
9528 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
9529 it pass DDR/DDR2 compliance tests.
9531 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
9533 commit b110f40bd180c6b560276589beedf753e97c46ce
9534 Author: Xie Xiaobo <r63061@freescale.com>
9535 Date: Wed Feb 14 18:27:06 2007 +0800
9537 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
9539 MPC8360E rev2.0 have new spridr,and PVR value,
9540 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
9542 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
9544 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
9545 Author: Xie Xiaobo <r63061@freescale.com>
9546 Date: Wed Feb 14 18:26:44 2007 +0800
9548 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
9550 MPC8349E rev3.1 have new spridr,and PVR value,
9551 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
9553 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
9555 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
9556 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
9557 Date: Wed Jan 31 11:04:19 2007 +0100
9559 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
9561 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
9562 which is used to se if an slave will ACK after receiving its address.
9564 Correct i2c probing to use this method as the old method could upset
9565 a slave as it wrote a data byte to it.
9567 Add a small delay in i2c_init() to let the controller
9568 shutdown any ongoing I2C activity.
9570 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
9572 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
9573 Author: Timur Tabi <timur@freescale.com>
9574 Date: Wed Jan 31 15:54:29 2007 -0600
9576 mpc83xx: Add support for the MPC8349E-mITX-GP
9578 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
9579 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
9580 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
9582 Signed-off-by: Timur Tabi <timur@freescale.com>
9584 commit fab16807adad350f618024350c6950165c247c72
9585 Author: Timur Tabi <timur@freescale.com>
9586 Date: Wed Jan 31 15:54:20 2007 -0600
9588 mpc83xx: Delete sdram_init() for MPC8349E-mITX
9590 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
9591 never does anything. This patch deletes it.
9593 Signed-off-by: Timur Tabi <timur@freescale.com>
9595 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
9596 Author: Dave Liu <daveliu@freescale.com>
9597 Date: Fri Jan 19 10:43:26 2007 +0800
9599 mpc83xx: Fix the LAW1/3 bug
9601 The patch solves the alignment problem of the local bus access windows to
9602 render accessible the memory bank and PHY registers of UPC 1 (starting at
9603 0xf801 0000). What we actually did was to adjust the sizes of the bus
9604 access windows so that the base address alignment requirement would be met.
9606 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
9607 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
9608 Signed-off-by: Dave Liu <daveliu@freescale.com>
9610 commit 97c4b397dce236a7318b304667bf89e59d08b17c
9611 Author: Kim Phillips <kim.phillips@freescale.com>
9612 Date: Tue Jan 30 16:15:31 2007 -0600
9614 mpc83xx: don't hang if watchdog configured on 8360, 832x
9616 don't hang if watchdog configured on 8360, 832x
9618 The watchdog programming model is the same across all 83xx devices;
9619 make the code reflect that.
9621 commit b70047478570e371ce7223be342ce98afea0f7d6
9622 Author: Kim Phillips <kim.phillips@freescale.com>
9623 Date: Tue Jan 30 16:15:21 2007 -0600
9625 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
9627 protect memcpy to bad address if a local-mac-address is missing from dt
9629 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
9630 Author: Kim Phillips <kim.phillips@freescale.com>
9631 Date: Tue Jan 30 16:15:04 2007 -0600
9633 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
9635 make 8360 default environment fdt be 8360 (not 8349)
9637 commit a28899c910024a0226331df07207b1038c300c93
9638 Author: Emilian Medve <Emilian.Medve@freescale.com>
9639 Date: Tue Jan 30 16:14:50 2007 -0600
9641 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
9643 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
9644 be used for busy-waiting since it strips the 'volatile' property from
9645 the bd variable. gcc3 was working by pure luck.
9647 This is a follow on patch to "Fix the UEC driver bug of QE"
9649 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
9650 Author: Kumar Gala <galak@kernel.crashing.org>
9651 Date: Tue Jan 30 14:08:30 2007 -0600
9653 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
9655 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
9656 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
9657 CONFIG_MPC834X so they are more generic.
9659 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9661 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
9662 Author: Kim Phillips <kim.phillips@freescale.com>
9663 Date: Thu Jan 25 13:40:55 2007 -0600
9665 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
9667 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
9668 Author: Kim Phillips <kim.phillips@freescale.com>
9669 Date: Wed Jan 24 17:18:37 2007 -0600
9671 mpc83xx: sort Makefile targets
9673 reordered targets alphabetically
9675 commit 91e25769771c1164ed63ffca0add49f934ae3343
9676 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
9677 Date: Tue Jan 16 11:38:14 2007 -0500
9679 mpc83xx: U-Boot support for Wind River SBC8349
9681 I've redone the SBC8349 support to match git-current, which
9682 incorporates all the MPC834x updates from Freescale since the 1.1.6
9683 release, including the DDR changes.
9685 I've kept all the SBC8349 files as parallel as possible to the
9686 MPC8349EMDS ones for ease of maintenance and to allow for easy
9687 inspection of what was changed to support this board. Hence the SBC8349
9688 U-Boot has FDT support and everything else that the MPC8349EMDS has.
9690 Fortunately the Freescale updates added support for boards using CS0,
9691 but I had to change spd_sdram.c to allow for board specific settings for
9692 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
9693 default if the board doesn't specify a value.)
9695 Hopefully this should be mergeable as-is and require no whitespace
9696 cleanups or similar, but if something doesn't measure up then let me
9697 know and I'll fix it.
9702 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
9703 Author: Sam Song <samsongshu@yahoo.com.cn>
9704 Date: Thu Dec 14 19:03:21 2006 +0800
9706 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
9708 A redundant semicolon existed in mpc8349itx.c
9711 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
9713 commit f35f358241c549be3f75cfe2eaa642914275b7ba
9714 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
9715 Date: Wed Dec 6 21:23:55 2006 -0500
9717 mpc83xx: Put the version (and magic) after the HRCW.
9719 Put the version (and magic) after the HRCW. This puts it in a fixed
9720 location in flash, not at the start of flash but as close as we can get.
9722 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
9724 commit 48aecd969171a6e99a55fae04933857787f9a5bd
9725 Author: Dave Liu <r63238@freescale.com>
9726 Date: Thu Dec 7 21:14:51 2006 +0800
9728 mpc83xx: Add the MPC832XEMDS board readme
9730 Add the MPC832XEMDS board readme
9732 Signed-off-by: Dave Liu <daveliu@freescale.com>
9734 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
9735 Author: Dave Liu <r63238@freescale.com>
9736 Date: Thu Dec 7 21:13:15 2006 +0800
9738 mpc83xx: Add support for the MPC832XEMDS board
9740 This patch supports DUART, ETH3/4 and PCI etc.
9742 Signed-off-by: Dave Liu <daveliu@freescale.com>
9744 commit e080313c32322e15ab5a18eb896a252858c57284
9745 Author: Dave Liu <r63238@freescale.com>
9746 Date: Thu Dec 7 21:11:58 2006 +0800
9748 mpc83xx: streamline the 83xx immr head file
9750 For better format and style, I streamlined the 83xx head files,
9751 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
9752 duplicated macro definition appear in the both files; 2) the structure
9753 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
9754 macro definition put inside the each structure. So, I cleaned up the
9755 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
9756 moved the macro definition to mpc83xx.h, Just like MPC8260.
9760 *streamline the 83xx immr head file
9762 Signed-off-by: Dave Liu <daveliu@freescale.com>
9764 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
9765 Author: Dave Liu <r63238@freescale.com>
9766 Date: Wed Dec 6 11:38:17 2006 +0800
9768 mpc83xx: Fix the UEC driver bug of QE
9770 The patch prevents the GCC tool chain from striping useful code for
9771 optimization. It will make UEC ethernet driver workable, Otherwise the
9772 UEC will fail in tx when you are using gcc4.x. but the driver can work
9773 when using gcc3.4.3.
9777 *Prevent the GCC from striping code for optimization, Otherwise the UEC
9778 will tx failed when you are using gcc4.x.
9780 Signed-off-by: Dave Liu <daveliu@freescale.com>
9782 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
9783 Author: Stefan Roese <sr@denx.de>
9784 Date: Thu Mar 1 21:11:36 2007 +0100
9786 [PATCH] Update AMCC Katmai 440SPe eval board support
9788 This patch updates the recently added Katmai board support. The biggest
9789 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
9792 Please note, that still some problems are left with some memory
9793 configurations. See the driver for more details.
9795 Signed-off-by: Stefan Roese <sr@denx.de>
9797 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
9798 Author: Stefan Roese <sr@denx.de>
9799 Date: Thu Mar 1 07:03:25 2007 +0100
9801 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
9803 Signed-off-by: Stefan Roese <sr@denx.de>
9805 commit ccbc7036648e465697ca298ba51e0e76dda352a0
9806 Author: Wolfgang Denk <wd@pollux.denx.de>
9807 Date: Wed Feb 28 01:28:53 2007 +0100
9809 SC3: fix typo in default environment
9811 commit e344568b1b46af85ec32d815586f91bc115d6223
9812 Author: Sergei Poselenov <sposelenov@emcraft.com>
9813 Date: Tue Feb 27 20:15:30 2007 +0300
9815 MCC200: Fixes for update procedure
9817 - fix logic error in image type handling
9818 - make sure file system images (cramfs etc.) get stored in flash
9819 with image header stripped so they can be mounted through MTD
9821 commit 743571145b37182757d4e688a77860b36ee77573
9822 Author: Wolfgang Denk <wd@pollux.denx.de>
9823 Date: Tue Feb 27 14:26:04 2007 +0100
9827 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
9828 Author: Sergei Poselenov <sposelenov@emcraft.com>
9829 Date: Tue Feb 27 12:40:16 2007 +0300
9831 MCC200 update - add LCD Progress Indicator
9833 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
9834 Author: Stefan Roese <sr@denx.de>
9835 Date: Thu Feb 22 07:43:34 2007 +0100
9837 [PATCH] get_dev() now unconditionally uses manual relocation
9839 Since the relocation fix is not included yet and we're not sure how
9840 it will be added, this patch removes code that required relocation
9841 to be fixed for now.
9843 Signed-off-by: Stefan Roese <sr@denx.de>
9845 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
9846 Author: Stefan Roese <sr@denx.de>
9847 Date: Thu Feb 22 07:40:23 2007 +0100
9849 [PATCH] Change systemace driver to select 8 & 16bit mode
9851 As suggested by Grant Likely this patch enables the Xilinx SystemACE
9852 driver to select 8 or 16bit mode upon startup.
9854 Signed-off-by: Stefan Roese <sr@denx.de>
9856 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
9857 Author: Haiying Wang <Haiying.Wang@freescale.com>
9858 Date: Wed Feb 21 16:52:31 2007 +0100
9860 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
9862 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
9863 is fully finished. The sync() is defined in each CPU's io.h file. For
9864 those CPUs which do not need sync for now, a dummy sync() is defined in
9867 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9869 commit da04995c7dc6772013a9a0dc5c767f190c402478
9870 Author: Stefan Roese <sr@denx.de>
9871 Date: Wed Feb 21 13:44:34 2007 +0100
9873 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
9875 Signed-off-by: Stefan Roese <sr@denx.de>
9877 commit 751bb57107d78978ae08e697c3deba816f5be091
9878 Author: Stefan Roese <sr@denx.de>
9879 Date: Tue Feb 20 13:21:57 2007 +0100
9881 [PATCH] Fix relocation problem with "new" get_dev() function
9883 This patch enables the "new" get_dev() function for block devices
9884 introduced by Grant Likely to be used on systems that still suffer
9885 from the relocation problems (manual relocation neede because of
9886 problems with linker script).
9888 Hopefully we can resolve this relocation issue soon for all platform
9889 so we don't need this additional code anymore.
9891 Signed-off-by: Stefan Roese <sr@denx.de>
9893 commit d93e2212f962668b3dce091ff5edc33f2347fe37
9894 Author: Stefan Roese <sr@denx.de>
9895 Date: Tue Feb 20 13:17:42 2007 +0100
9897 [PATCH] Update SystemACE driver for 16bit access
9899 This patch removes some problems when the Xilinx SystemACE driver
9900 is used with 16bit access on an big endian platform (like the
9903 Signed-off-by: Stefan Roese <sr@denx.de>
9905 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
9906 Author: Stefan Roese <sr@denx.de>
9907 Date: Tue Feb 20 13:15:40 2007 +0100
9909 [PATCH] Clean up Katmai (440SPe) linker script
9911 Signed-off-by: Stefan Roese <sr@denx.de>
9913 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
9914 Author: Stefan Roese <sr@denx.de>
9915 Date: Tue Feb 20 10:57:08 2007 +0100
9917 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
9919 Signed-off-by: Stefan Roese <sr@denx.de>
9921 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
9922 Author: Stefan Roese <sr@denx.de>
9923 Date: Tue Feb 20 10:51:26 2007 +0100
9925 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
9927 This patch switches to the desired I2C bus when the date/dtt
9928 commands are called. This can be configured using the
9929 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
9931 Signed-off-by: Stefan Roese <sr@denx.de>
9933 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
9934 Author: Stefan Roese <sr@denx.de>
9935 Date: Tue Feb 20 10:43:34 2007 +0100
9937 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
9939 This patch adds support for the DDR2 controller used on the
9940 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
9941 board and works fine with the following DIMM modules:
9943 - Corsair CM2X512-5400C4 (512MByte per DIMM)
9944 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
9945 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
9947 This patch also adds the nice functionality to dynamically
9948 create the TLB entries for the SDRAM (tlb.c). So we should
9949 never run into such problems with wrong (too short) TLB
9950 initialization again on these platforms.
9952 Signed-off-by: Stefan Roese <sr@denx.de>
9954 commit 36d830c9830379045f5daa9f542ac1c990c70068
9955 Author: Stefan Roese <sr@denx.de>
9956 Date: Tue Feb 20 10:35:42 2007 +0100
9958 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
9960 Since the existing 4xx SPD SDRAM initialization routines for the
9961 405 SDRAM controller and the 440 DDR controller don't have much in
9962 common this patch splits both drivers into different files.
9964 This is in preparation for the 440 DDR2 controller support (440SP/e).
9966 Signed-off-by: Stefan Roese <sr@denx.de>
9968 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
9969 Author: Stefan Roese <sr@denx.de>
9970 Date: Tue Feb 20 10:27:08 2007 +0100
9972 [PATCH] PPC4xx: Add support for multiple I2C busses
9974 This patch adds support for multiple I2C busses on the PPC4xx
9975 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
9976 to make use of this feature.
9978 It also merges the 405 and 440 i2c header files into one common
9981 Also the 4xx i2c reset procedure is reworked since I experienced
9982 some problems with the first access on the 440SPe Katmai board.
9984 Signed-off-by: Stefan Roese <sr@denx.de>
9986 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
9987 Author: Grant Likely <grant.likely@secretlab.ca>
9988 Date: Tue Feb 20 09:05:45 2007 +0100
9990 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
9992 Block device read/write is anonymous data; there is no need to use a
9993 typed pointer. void * is fine. Also add a hook for block_read functions
9995 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9997 commit 53758fa20e935cc87eeb0519ed365df753a6f289
9998 Author: Grant Likely <grant.likely@secretlab.ca>
9999 Date: Tue Feb 20 09:05:38 2007 +0100
10001 [PATCH 8_9] Add block_write hook to block_dev_desc_t
10003 Preparation for future patches which support block device writing
10005 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10007 commit f4852ebe6ca946a509667eb68be42026f837be76
10008 Author: Grant Likely <grant.likely@secretlab.ca>
10009 Date: Tue Feb 20 09:05:31 2007 +0100
10011 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
10013 Register read/write does not need to be wrapped in a full function. The
10014 patch replaces them with macros.
10016 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10018 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
10019 Author: Grant Likely <grant.likely@secretlab.ca>
10020 Date: Tue Feb 20 09:05:23 2007 +0100
10022 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
10024 The code in this file is not a command; it is a device driver. Put it in
10025 the correct place. There are zero functional changes in this patch, it
10026 only moves the file.
10028 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10030 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
10031 Author: Grant Likely <grant.likely@secretlab.ca>
10032 Date: Tue Feb 20 09:05:16 2007 +0100
10034 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
10036 This patch is in preparation of additional changes to the sysace driver.
10037 May as well take this opportunity to fixup the inconsistent whitespace since
10038 this file is about to undergo major changes anyway.
10040 There are zero functional changes in this patch. It only cleans up the
10043 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10045 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
10046 Author: Grant Likely <grant.likely@secretlab.ca>
10047 Date: Tue Feb 20 09:05:07 2007 +0100
10049 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
10051 isprint is already defined in ctype.c
10053 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10055 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
10056 Author: Grant Likely <grant.likely@secretlab.ca>
10057 Date: Tue Feb 20 09:05:00 2007 +0100
10059 [PATCH 3_9] Move buffer print code from md command to common function
10061 Printing a buffer is a darn useful thing. Move the buffer print code
10062 into print_buffer() in lib_generic/
10064 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10066 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
10067 Author: Grant Likely <grant.likely@secretlab.ca>
10068 Date: Tue Feb 20 09:04:52 2007 +0100
10070 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
10072 Change the xilinx device drivers and board code to include config.h
10073 instead of xparameters.h directly. config.h always includes the
10074 correct xparameters file. This change reduces the posibility of
10075 including the wrong file when adding a new xilinx board port
10077 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10079 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
10080 Author: Grant Likely <grant.likely@secretlab.ca>
10081 Date: Tue Feb 20 09:04:34 2007 +0100
10083 [PATCH 1_4] Merge common get_dev() routines for block devices
10085 Each of the filesystem drivers duplicate the get_dev routine. This change
10086 merges them into a single function in part.c
10088 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10090 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
10091 Author: Wolfgang Denk <wd@pollux.denx.de>
10092 Date: Mon Feb 19 23:09:51 2007 +0100
10094 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
10095 as root file system images.
10097 commit 489c696ae7211218961d159e43e722d74c36fcbc
10098 Author: Sergei Poselenov <sposelenov@emcraft.com>
10099 Date: Wed Feb 14 14:30:28 2007 +0300
10101 MCC200: Extensions to Software Update Mechanism
10103 Update / extend Software Update Mechanism for MCC200 board:
10105 - Add support for rootfs image added. The environment variables
10106 "rootfs_st" and "rootfs_nd" can be used to override the default
10107 values of the image start and end.
10108 - Remove excessive key check code.
10111 commit 4be23a12f23f1372634edc3215137b09768b7949
10112 Author: Stefan Roese <sr@denx.de>
10113 Date: Mon Feb 19 08:23:15 2007 +0100
10115 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
10117 As spotted by Matthias Fuchs, the READY input should not be
10118 enabled for the NOR FLASH on the Sequoia board.
10120 Signed-off-by: Stefan Roese <sr@denx.de>
10122 commit 2605e90bf676d48123afe5719a846d2b52b24aac
10123 Author: Heiko Schocher <hs@pollux.denx.de>
10124 Date: Fri Feb 16 07:57:42 2007 +0100
10126 [PATCH] Added support for the jupiter board.
10128 Signed-off-by: Heiko Schocher <hs@denx.de>
10130 commit 497d012e5be0194e1084073d0081eb1a844796b2
10131 Author: Gary Jennejohn <garyj@pollux.denx.de>
10132 Date: Mon Feb 12 13:11:50 2007 +0100
10134 LPC2292: patch from Siemens.
10136 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
10137 Author: Stefan Roese <sr@denx.de>
10138 Date: Sat Feb 10 08:49:31 2007 +0100
10140 [PATCH] Add missing p3mx.h file to repository (ups)
10142 Signed-off-by: Stefan Roese <sr@denx.de>
10144 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
10145 Author: Bartlomiej Sieka <tur@semihalf.com>
10146 Date: Fri Feb 9 10:45:42 2007 +0100
10148 [Motion-PRO] Preliminary support for the Motion-PRO board.
10150 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
10151 Author: Stefan Roese <sr@denx.de>
10152 Date: Wed Feb 7 16:51:08 2007 +0100
10154 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
10156 Some boards that can have more than 768MBytes of SDRAM need to
10157 set "initrd_high", so that the initrd can be accessed by the
10160 Signed-off-by: Stefan Roese <sr@denx.de>
10162 commit 7372ca68227930d03cffa548310524cad5b96733
10163 Author: Stefan Roese <sr@denx.de>
10164 Date: Fri Feb 2 12:44:22 2007 +0100
10166 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
10168 Previously the strapping DCR/SDR was read to determine if the internal PCI
10169 arbiter is enabled or not. This strapping bit can be overridden, so now
10170 the current status is read from the correct DCR/SDR register.
10172 Signed-off-by: Stefan Roese <sr@denx.de>
10174 commit 2aa54f651a42d198673318f07a20c89a43e4d197
10175 Author: Stefan Roese <sr@denx.de>
10176 Date: Fri Feb 2 12:42:08 2007 +0100
10178 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
10180 Signed-off-by: Stefan Roese <sr@denx.de>
10182 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
10183 Author: Stefan Roese <sr@denx.de>
10184 Date: Thu Feb 1 13:22:41 2007 +0100
10186 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
10188 When PCI PNP is enabled the pci pnp configuration routine is called
10189 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
10190 problems with some PCI cards. For now disable the PCI PNP configuration.
10192 Signed-off-by: Stefan Roese <sr@denx.de>
10194 commit 2902fadade3be7659467e8d074048c6b7068f5c0
10195 Author: Stefan Roese <sr@denx.de>
10196 Date: Wed Jan 31 16:56:10 2007 +0100
10198 [PATCH] Update 440EPx/440GRx cpu detection
10200 Signed-off-by: Stefan Roese <sr@denx.de>
10202 commit d5ea287b02a6945c3977410e364a879dd1a555c8
10203 Author: Stefan Roese <sr@denx.de>
10204 Date: Wed Jan 31 16:38:04 2007 +0100
10206 [PATCH] Update esd cpci5200 files
10208 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
10210 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
10211 Author: Stefan Roese <sr@denx.de>
10212 Date: Wed Jan 31 16:37:34 2007 +0100
10214 [PATCH] Add support for esd mecp5200 board
10216 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
10218 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
10219 Author: Stefan Roese <sr@denx.de>
10220 Date: Wed Jan 31 12:38:50 2007 +0100
10222 [PATCH] Remove unneccessary yellowstone board config file
10224 Signed-off-by: Stefan Roese <sr@denx.de>
10226 commit e802594b6fa1b166308820c276b96dc0d7cc731c
10227 Author: Stefan Roese <sr@denx.de>
10228 Date: Tue Jan 30 17:06:10 2007 +0100
10230 [PATCH] Update Sequoia (440EPx) config file
10232 The config file now handles the 2nd target, the Rainier (440GRx)
10233 evaluation board better. Additionally the PPC input clock was
10234 adjusted to match the correct value of 33.0 MHz.
10236 Signed-off-by: Stefan Roese <sr@denx.de>
10238 commit 700200c67e73b83751418abe7815840dca8fd6cb
10239 Author: Stefan Roese <sr@denx.de>
10240 Date: Tue Jan 30 17:04:19 2007 +0100
10242 [PATCH] Merge Yosemite & Yellowstone board ports
10244 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
10245 share one config file and all board specific files. This way we
10246 don't have to maintain two different sets of files for nearly
10249 Signed-off-by: Stefan Roese <sr@denx.de>
10251 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
10252 Author: Stefan Roese <sr@denx.de>
10253 Date: Tue Jan 30 15:01:49 2007 +0100
10255 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
10257 SCPU doesn't use redundant environment in flash.
10259 Signed-off-by: Stefan Roese <sr@denx.de>
10261 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
10262 Author: Stefan Roese <sr@denx.de>
10263 Date: Tue Jan 30 12:51:07 2007 +0100
10265 [PATCH] alpr: Update alpr board config file
10267 Signed-off-by: Stefan Roese <sr@denx.de>
10269 commit f8db84f132b1e335f20f96138a1f09ed97b08664
10270 Author: Wolfgang Denk <wd@pollux.denx.de>
10271 Date: Tue Jan 30 00:50:40 2007 +0100
10273 LPC2292 SODIMM port coding style cleanup.
10275 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
10276 Author: Gary Jennejohn <garyj@pollux.denx.de>
10277 Date: Wed Jan 24 12:16:56 2007 +0100
10279 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
10281 commit 2daf046ba627f85f44195815778140039636244e
10282 Author: Bartlomiej Sieka <tur@semihalf.com>
10283 Date: Tue Jan 23 17:22:06 2007 +0100
10285 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
10287 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
10288 Author: Bartlomiej Sieka <tur@semihalf.com>
10289 Date: Tue Jan 23 14:21:14 2007 +0100
10291 [iDMR] Flash driver on initialisation write-protects some sectors,
10292 currently sectors 0-3. Sector 3 does not need to be protected, though
10293 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
10294 fixes this, i.e., only sectors 0-2 are protected.
10296 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
10297 Author: Bartlomiej Sieka <tur@semihalf.com>
10298 Date: Tue Jan 23 14:11:22 2007 +0100
10300 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
10301 "mii device" results in "Unexpected exception"). Fixing this properly
10302 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
10303 this commit disables MII commads for now.
10305 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
10306 Author: Bartlomiej Sieka <tur@semihalf.com>
10307 Date: Tue Jan 23 13:25:22 2007 +0100
10309 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
10310 Identification Register (CIR).
10312 commit fdef388758506765d4d6a7155c8f1584c63ff581
10313 Author: roy zang <tie-fei.zang@freescale.com>
10314 Date: Mon Jan 22 13:19:21 2007 +0800
10316 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
10317 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
10318 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
10321 commit a4012396645533aef218354eeba754dff0deace8
10322 Author: Wolfgang Denk <wd@pollux.denx.de>
10323 Date: Fri Jan 19 23:08:39 2007 +0100
10325 Minor code cleanup.
10327 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
10328 Author: Heiko Schocher <hs@pollux.denx.de>
10329 Date: Fri Jan 19 19:57:10 2007 +0100
10331 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
10333 Signed-off-by: Heiko Schocher <hs@denx.de>
10335 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
10336 Author: Heiko Schocher <hs@pollux.denx.de>
10337 Date: Fri Jan 19 18:05:26 2007 +0100
10339 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
10340 if you must swap the bytes between reading/writing.
10341 (Needed for the SC3 board)
10343 Signed-off-by: Heiko Schocher <hs@denx.de>
10345 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
10346 Author: Stefan Roese <sr@denx.de>
10347 Date: Thu Jan 18 16:05:47 2007 +0100
10349 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
10351 Signed-off-by: Stefan Roese <sr@denx.de>
10353 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
10354 Author: Stefan Roese <sr@denx.de>
10355 Date: Thu Jan 18 11:54:52 2007 +0100
10357 [PATCH] Update Prodrive P3Mx support
10359 Signed-off-by: Stefan Roese <sr@denx.de>
10361 commit 34167a36c29ee946b727465db5c014746a08e978
10362 Author: Stefan Roese <sr@denx.de>
10363 Date: Thu Jan 18 11:48:10 2007 +0100
10365 [PATCH] Add missing Taishan config file
10367 Signed-off-by: Stefan Roese <sr@denx.de>
10369 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
10370 Author: Heiko Schocher <hs@pollux.denx.de>
10371 Date: Thu Jan 18 11:28:51 2007 +0100
10373 [PATCH] Fix: Compilerwarnings for SC3 board.
10374 The EBC Configuration Register is now by CFG_EBC_CFG definable
10375 Added JFFS2 support for the SC3 board.
10377 Signed-off-by: Heiko Schocher <hs@denx.de>
10379 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
10380 Author: Stefan Roese <sr@denx.de>
10381 Date: Thu Jan 18 10:25:34 2007 +0100
10383 [PATCH] Add support for AMCC Taishan PPC440GX eval board
10385 Signed-off-by: Stefan Roese <sr@denx.de>
10387 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
10388 Author: Wolfgang Denk <wd@pollux.denx.de>
10389 Date: Tue Jan 16 18:30:50 2007 +0100
10391 Raname solidcard3 into sc3; add redundant env for sc3
10393 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
10394 Author: Wolfgang Denk <wd@pollux.denx.de>
10395 Date: Tue Jan 16 12:46:35 2007 +0100
10397 Update default environment for Solidcard3
10399 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
10400 Author: Stefan Roese <sr@denx.de>
10401 Date: Mon Jan 15 09:46:29 2007 +0100
10403 [PATCH] Fix 440SPe rev B detection from previous patch
10405 Signed-off-by: Stefan Roese <sr@denx.de>
10407 commit a443d31410c571ee8f970da819a44d698fdd6b1f
10408 Author: Heiko Schocher <hs@pollux.denx.de>
10409 Date: Sun Jan 14 13:35:31 2007 +0100
10411 [FIX] correct I2C Writes for the LM81 Sensor.
10413 Signed-off-by: Heiko Schocher <hs@denx.de>
10415 commit 0bba5452835f19a61204edcda3a58112fd8e2208
10416 Author: Wolfgang Denk <wd@pollux.denx.de>
10417 Date: Sat Jan 13 11:17:10 2007 +0100
10419 Undo commit 3033ebb2: reset command does not take any arguments
10421 Haiying Wang's modification to the reset command was broken, undo it.
10423 Signed-off-by: Wolfgang Denk <wd@denx.de>
10425 commit 95981778cff0038fd9941044d6a3eda810e33258
10426 Author: Stefan Roese <sr@denx.de>
10427 Date: Sat Jan 13 08:01:03 2007 +0100
10429 [PATCH] Update 440SP(e) cpu revisions
10431 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
10433 Signed-off-by: Stefan Roese <sr@denx.de>
10435 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
10436 Author: Stefan Roese <sr@denx.de>
10437 Date: Sat Jan 13 07:59:56 2007 +0100
10439 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
10441 Now the board revision and the current PCI bus speed are printed after
10444 Also the EBC initialising is now done via defines in the board config
10447 Signed-off-by: Stefan Roese <sr@denx.de>
10449 commit 36adff362c2c0141ff8a810d42a7e478f779130f
10450 Author: Stefan Roese <sr@denx.de>
10451 Date: Sat Jan 13 07:59:19 2007 +0100
10453 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
10455 Now the board revision and the current PCI bus speed are printed after
10458 Also the EBC initialising is now done via defines in the board config
10461 Signed-off-by: Stefan Roese <sr@denx.de>
10463 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
10464 Author: Stefan Roese <sr@denx.de>
10465 Date: Sat Jan 13 07:57:51 2007 +0100
10467 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
10469 Now the board revision and the current PCI bus speed are printed after
10472 Signed-off-by: Stefan Roese <sr@denx.de>
10474 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
10475 Author: Heiko Schocher <hs@pollux.denx.de>
10476 Date: Thu Jan 11 15:44:44 2007 +0100
10478 Added support for the SOLIDCARD III board from Eurodesign
10480 Signed-off-by: Heiko Schocher <hs@denx.de>
10482 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
10483 Author: Reinhard Thies <Reinhard.Thies@web.de>
10484 Date: Wed Jan 10 14:41:14 2007 +0100
10486 Adjusted default environment for cam5200 board.
10488 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
10489 Author: Wolfgang Denk <wd@pollux.denx.de>
10490 Date: Wed Jan 10 15:35:52 2007 +0100
10494 commit 787fa15860a57833e50bd30555079a9cd4e519b8
10495 Author: Wolfgang Denk <wd@pollux.denx.de>
10496 Date: Wed Jan 10 01:28:39 2007 +0100
10498 Fix auto_update for MCC200 board.
10500 The invocation of do_auto_update() is moved to the end of the
10501 misc_init_r() function, after the flash mappings have been
10502 initialized. Please find attached a patch that implements that
10505 Also correct the decoding of the keypad status. With this update, the
10506 key that will trigger the update is Column 2, Row 2.
10508 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
10509 Author: Marian Balakowicz <m8@semihalf.com>
10510 Date: Wed Jan 10 00:26:15 2007 +0100
10512 CAM5200 flash driver modifications:
10513 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
10514 - add second build target 'cam5200_niosflash' which still uses custom driver
10516 commit 67fea022fa957f59653b5238c7496f80a6b70432
10517 Author: Markus Klotzbuecher <mk@denx.de>
10518 Date: Tue Jan 9 16:02:48 2007 +0100
10520 SPC1920: cleanup memory contoller setup
10522 commit 8fc2102faa23593c80381437c09f7745a14deb40
10523 Author: Markus Klotzbuecher <mk@denx.de>
10524 Date: Tue Jan 9 14:57:14 2007 +0100
10526 Fix the cpu speed setup to work with all boards.
10528 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
10529 Author: Markus Klotzbuecher <mk@denx.de>
10530 Date: Tue Jan 9 14:57:13 2007 +0100
10532 SPC1920: add support for the FM18L08 Ramtron FRAM
10534 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
10535 Author: Markus Klotzbuecher <mk@denx.de>
10536 Date: Tue Jan 9 14:57:13 2007 +0100
10538 SPC1920: update the HPI register addresses to work with the second
10539 generation of hardware
10541 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
10542 Author: Markus Klotzbuecher <mk@creamnet.de>
10543 Date: Tue Jan 9 14:57:13 2007 +0100
10545 Miscellanious spc1920 related cleanups
10547 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
10548 Author: Markus Klotzbuecher <mk@denx.de>
10549 Date: Tue Jan 9 14:57:12 2007 +0100
10551 SPC1920 GO/NOGO led should be set to color red in U-Boot
10553 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
10554 Author: Markus Klotzbuecher <mk@creamnet.de>
10555 Date: Tue Jan 9 14:57:12 2007 +0100
10557 Add support for the DS3231 RTC
10559 commit 8139567b60d678584b05f0718a681f2047c5e14f
10560 Author: Markus Klotzbuecher <mk@creamnet.de>
10561 Date: Tue Jan 9 14:57:11 2007 +0100
10563 SMC1 uses external CLK4 instead of BRG on spc1920
10565 commit d8d9de1a02fbd880b613d607143d1f57342affc7
10566 Author: Markus Klotzbuecher <mk@creamnet.de>
10567 Date: Tue Jan 9 14:57:10 2007 +0100
10569 Update the SPC1920 CMB PLD driver
10571 commit 3f34f869162750e5e999fd140f884f5de952bcfe
10572 Author: Markus Klotzbuecher <mk@creamnet.de>
10573 Date: Tue Jan 9 14:57:10 2007 +0100
10575 Add / enable I2C support on the spc1920 board
10577 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
10578 Author: Markus Klotzbuecher <mk@creamnet.de>
10579 Date: Tue Jan 9 14:57:10 2007 +0100
10581 Add support for the tms320671x host port interface (HPI)
10583 commit f4eb54529bb3664c3a562e488b460fe075f79d67
10584 Author: Wolfgang Denk <wd@pollux.denx.de>
10585 Date: Sun Jan 7 00:13:11 2007 +0100
10587 Prepare for release 1.2.0
10589 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
10590 Author: Stefan Roese <sr@denx.de>
10591 Date: Sat Jan 6 15:58:09 2007 +0100
10593 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
10595 This patch fixes a problem with an incorrect setup for the refresh
10596 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
10598 Signed-off-by: Stefan Roese <sr@denx.de>
10600 commit f16c1da9577f06c5fc08651a4065537407de4635
10601 Author: Stefan Roese <sr@denx.de>
10602 Date: Sat Jan 6 15:56:13 2007 +0100
10604 [PATCH] Update ALPR board files
10606 This update brings the ALPR board support to the newest version.
10607 It also fixes a problem with the NAND driver.
10609 Signed-off-by: Stefan Roese <sr@denx.de>
10611 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
10612 Author: Stefan Roese <sr@denx.de>
10613 Date: Fri Jan 5 11:46:05 2007 +0100
10615 [PATCH] nand: Fix problem with oobsize calculation
10617 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
10619 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
10620 returns a 0x15. In the code fragment below bits [1:0] determine the
10621 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
10622 next field is also ANDed with 0x3. However this is a one bit field
10623 as defined in the Hynix and Samsung parts in the 4th ID byte that
10624 determins the oobsize, not a two bit field. It works on Samsung as
10625 bits[3:2] are 01. However for the Hynix there is a 11 in these two
10626 bits, so the oob size gets messed up.
10628 I checked the correct linux code and the suggested fix from Brian is
10629 also available in the linux nand mtd driver.
10631 Signed-off-by: Stefan Roese <sr@denx.de>
10633 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
10634 Author: Stefan Roese <sr@denx.de>
10635 Date: Fri Jan 5 10:40:36 2007 +0100
10637 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
10639 This fix will make the MAL burst disabling patch for the Linux
10640 EMAC driver obsolete.
10642 Signed-off-by: Stefan Roese <sr@denx.de>
10644 commit 023889838282b6237b401664f22dd22dfba2c066
10645 Author: Stefan Roese <sr@denx.de>
10646 Date: Fri Jan 5 10:38:05 2007 +0100
10648 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
10650 This code will optimize the DDR2 controller setup on a board specific
10653 Note: This code doesn't work right now on the NAND booting image for the
10654 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
10656 Signed-off-by: Stefan Roese <sr@denx.de>
10658 commit cce4acbb68398634b8d011ed7bb0d12269c84230
10659 Author: Bartlomiej Sieka <tur@semihalf.com>
10660 Date: Thu Dec 28 19:08:21 2006 +0100
10663 - fix a typo in V38B config file
10664 - move watchdog initialisation earlier in the boot process
10665 - add "wdt=off" to default kernel command line (disables kernel watchdog)
10667 commit 92eb729bad876725aeea908d2addba0800620840
10668 Author: Wolfgang Denk <wd@pollux.denx.de>
10669 Date: Wed Dec 27 01:26:13 2006 +0100
10671 Fix bug in adaption of Stefano Babic's CFI driver patch.
10673 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
10674 Author: Wolfgang Denk <wd@pollux.denx.de>
10675 Date: Sun Dec 24 01:42:57 2006 +0100
10677 Minor code cleanup.
10679 commit d784fdb05900ada3686d5778783e1fb328e9fb66
10680 Author: Stefano Babic <sbabic@denx.de>
10681 Date: Tue Dec 12 00:22:42 2006 +0100
10683 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
10685 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
10686 Author: Stefan Roese <sr@denx.de>
10687 Date: Fri Dec 22 14:29:40 2006 +0100
10689 [PATCH] Fix sequoia flash autodetection (finally correct)
10691 Now 32MByte and 64MByte FLASH is know to work and other
10692 configurations should work too.
10694 Signed-off-by: Stefan Roese <sr@denx.de>
10696 commit 82e5236a8b719543643fd26d5827938ab2b94818
10697 Author: Wolfgang Denk <wd@pollux.denx.de>
10698 Date: Fri Dec 22 10:30:26 2006 +0100
10700 Minor code cleanup; update CHANGELOG.
10702 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
10703 Author: Heiko Schocher <hs@pollux.denx.de>
10704 Date: Thu Dec 21 17:17:02 2006 +0100
10706 Added support for the TQM8272 board from TQ
10708 Signed-off-by: Heiko Schocher <hs@denx.de>
10710 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
10711 Author: Heiko Schocher <hs@pollux.denx.de>
10712 Date: Thu Dec 21 16:14:48 2006 +0100
10714 [PATCH] Add support for the UC101 board from MAN.
10716 Signed-off-by: Heiko Schocher <hs@denx.de>
10718 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
10719 Author: Bartlomiej Sieka <tur@semihalf.com>
10720 Date: Wed Dec 20 00:29:43 2006 +0100
10722 Fix to make the baudrate changes immediate for the MCF52x2 family.
10724 commit daa6e418bcc0c717752e8de939c213c790286096
10725 Author: Bartlomiej Sieka <tur@semihalf.com>
10726 Date: Wed Dec 20 00:27:32 2006 +0100
10728 Preliminary support for the iDMR board (ColdFire).
10730 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
10731 Author: Andrei Safronov <safronov@pollux.denx.de>
10732 Date: Fri Dec 8 16:23:08 2006 +0100
10734 automatic update mechanism
10736 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
10737 Author: roy zang <tie-fei.zang@freescale.com>
10738 Date: Mon Dec 4 17:56:59 2006 +0800
10740 Slight code clean up.
10741 Add comments, delete duplicate define and remove spaces.
10742 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10744 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
10745 Author: roy zang <tie-fei.zang@freescale.com>
10746 Date: Mon Dec 4 17:54:21 2006 +0800
10748 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
10749 multiplier table can not refect the real PLL clock behavior of these
10750 processors. Please refer to the hardware specification for detailed
10751 information of the corresponding processors.
10752 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10754 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
10755 Author: roy zang <tie-fei.zang@freescale.com>
10756 Date: Mon Dec 4 14:46:23 2006 +0800
10758 Remove the static MAC address, ip address, server ip, netmask and
10759 gateway ip for network setting.
10760 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10762 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
10763 Author: roy zang <tie-fei.zang@freescale.com>
10764 Date: Mon Dec 4 14:33:08 2006 +0800
10766 Remove the duplicate memory test code for mpc744ihpc2 board.
10767 If a memory test is needed, please use the functions in
10768 post/memory.c or memtest command.
10769 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10771 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
10772 Author: roy zang <tie-fei.zang@freescale.com>
10773 Date: Fri Dec 1 19:01:25 2006 +0800
10775 Fix the exception occuring in RAM table search issue.
10776 The original search_one_table() function code can only processes the search
10777 for the exception occurring in FLASH/ROM, because the exception and fixup
10778 table usually locate in FLASH. If the exception address is also in
10779 FLASH, it will be OK.
10780 If the exception occurs in RAM, after the u-boot relocation, a
10781 relocation offset should be added.
10783 clean up the code in cpu/74xx_7xx/cpu.c
10785 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10787 commit ee311214e0d216f904feea269599d0934bf71f23
10788 Author: roy zang <tie-fei.zang@freescale.com>
10789 Date: Fri Dec 1 11:47:36 2006 +0800
10791 Clean up the code according to codestyle:
10792 (1) remove some C++ comments.
10793 (2) remove trailing white space.
10794 (3) remove trailing empty line.
10795 (4) Indentation by table.
10796 (5) remove {} in one line condition.
10797 (6) add space before '(' in function call.
10798 Remove some weird printf () output.
10799 Add necessary comments.
10800 Modified Makefile to support building in a separate directory.
10802 commit dd520bf314c7add4183c5191692180f576f96b60
10803 Author: Wolfgang Denk <wd@pollux.denx.de>
10804 Date: Thu Nov 30 18:02:20 2006 +0100
10808 commit 8d9a8610b8256331132227e9e6585c6bd5742787
10809 Author: Wolfgang Denk <wd@pollux.denx.de>
10810 Date: Thu Nov 30 01:54:07 2006 +0100
10812 Code cleanup. Update CHANGELOG.
10814 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
10815 Author: Grant Likely <grant.likely@secretlab.ca>
10816 Date: Wed Nov 29 16:23:42 2006 +0100
10818 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
10820 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
10821 not the XLB frequency.
10823 This patch depends on the previous patches for MPC52xx device tree support
10825 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10826 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
10828 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
10829 Author: Stefan Roese <sr@denx.de>
10830 Date: Wed Nov 29 15:42:37 2006 +0100
10832 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
10834 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
10835 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
10836 quite similar and share the same board directory "prodrive/p3mx"
10837 and the same config file "p3mx.h".
10839 Signed-off-by: Stefan Roese <sr@denx.de>
10841 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
10842 Author: Stefan Roese <sr@denx.de>
10843 Date: Wed Nov 29 12:53:15 2006 +0100
10845 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
10847 In the bootvx command the load address was only read from the env
10848 variable "loadaddr" and not optionally passed as paramter as described
10849 in the help. This is fixed with this patch. The behaviour is now the
10850 same as in the bootelf command.
10852 Signed-off-by: Stefan Roese <sr@denx.de>
10854 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
10855 Author: Stefan Roese <sr@denx.de>
10856 Date: Wed Nov 29 12:03:57 2006 +0100
10858 [PATCH] include/ppc440.h minor error affecting interrupts
10860 Fixed include/ppc440.c for UIC address Bug
10862 Corrects bug affecting the addresses for the universal interrupt
10863 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
10865 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
10866 Signed-off-by: Stefan Roese <sr@denx.de>
10868 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
10869 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
10870 Date: Tue Nov 28 16:17:27 2006 -0600
10872 Make fsl-i2c not conflict with SOFT I2C
10874 Signed-off-by: Timur Tabi <timur@freescale.com>
10876 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
10877 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
10878 Date: Tue Nov 28 16:17:18 2006 -0600
10880 Fix I2C master address initialization.
10882 Signed-off-by: Timur Tabi <timur@freescale.com>
10884 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
10885 Author: Kim Phillips <kim.phillips@freescale.com>
10886 Date: Tue Nov 28 23:31:19 2006 -0600
10888 Assign maintainers for mpc8349emds and mpc8360emds
10890 Dave for mpc8360emds, and me for mpc8349emds.
10892 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
10893 Author: Kim Phillips <kim.phillips@freescale.com>
10894 Date: Tue Nov 28 23:28:33 2006 -0600
10896 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
10898 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
10899 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
10901 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
10902 Author: Timur Tabi <timur@freescale.com>
10903 Date: Tue Nov 28 12:09:35 2006 -0600
10905 mpc83xx: Miscellaneous code style fixes
10907 Implement various code style fixes and similar changes.
10909 Signed-off-by: Timur Tabi <timur@freescale.com>
10911 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
10912 Author: Stefan Roese <sr@denx.de>
10913 Date: Tue Nov 28 17:55:49 2006 +0100
10915 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
10917 This patch adds the code and configuration necessary to boot with an
10918 arch/powerpc Linux kernel.
10920 Signed-off-by: Grant Likely <grant.likely@gmail.com>
10921 Acked-by: Jon Loeliger <jdl@freescale.com>
10923 commit e732faec95a83cb468b4850ae807c8301dde8f6a
10924 Author: Stefan Roese <sr@denx.de>
10925 Date: Tue Nov 28 16:09:24 2006 +0100
10927 [PATCH] PPC4xx: 440SP Rev. C detection added
10929 Signed-off-by: Stefan Roese <sr@denx.de>
10931 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
10932 Author: Stefan Roese <sr@denx.de>
10933 Date: Tue Nov 28 11:04:45 2006 +0100
10935 [PATCH] nand: Fix patch merge problem
10937 Signed-off-by: Stefan Roese <sr@denx.de>
10939 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
10940 Author: Stefan Roese <sr@denx.de>
10941 Date: Tue Nov 28 11:04:45 2006 +0100
10943 [PATCH] nand: Fix patch merge problem
10945 Signed-off-by: Stefan Roese <sr@denx.de>
10947 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
10948 Author: Wolfgang Denk <wd@pollux.denx.de>
10949 Date: Mon Nov 27 22:53:53 2006 +0100
10953 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
10954 Author: Stefan Roese <sr@denx.de>
10955 Date: Mon Nov 27 17:43:25 2006 +0100
10957 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
10959 Patch below corrects the setting of the zmiifer register, it was
10960 overwritting the register rather than ORing the settings.
10962 Signed-off-by: Neil Wilson <NWilson@airspan.com>
10963 Signed-off-by: Stefan Roese <sr@denx.de>
10965 commit d1a72545296800b7e219f93104ad5836f0003d66
10966 Author: Stefan Roese <sr@denx.de>
10967 Date: Mon Nov 27 17:34:10 2006 +0100
10969 [PATCH] Select NAND embedded environment from board configuration
10971 The current NAND Bootloader setup forces the environment
10972 variables to be in line with the bootloader. This change
10973 enables the configuration to be made in the board include
10974 file instead so that it can be individually enabled.
10976 Signed-off-by: Nick Spence <nick.spence@freescale.com>
10977 Signed-off-by: Stefan Roese <sr@denx.de>
10979 commit 15784862857c3c2214498defcfed84ff137fb81e
10980 Author: Stefan Roese <sr@denx.de>
10981 Date: Mon Nov 27 17:22:19 2006 +0100
10983 [PATCH] nand_wait() timeout fixes
10985 Two fixes for the nand_wait() function in
10986 drivers/nand/nand_base.c:
10988 1. Use correct timeouts. The original timeouts in Linux
10989 source are 400ms and 20ms not 40s and 20s
10991 2. Return correct error value in case of timeout. 0 is
10994 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
10995 Signed-off-by: Stefan Roese <sr@denx.de>
10997 commit da5553b095bf04f4f109ad7e565dae3aba47b230
10998 Author: Stefan Roese <sr@denx.de>
10999 Date: Mon Nov 27 17:04:06 2006 +0100
11001 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
11003 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
11004 arguments to bootm. It removes the getenv("disable_of") test that used
11005 to be used for this purpose.
11007 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
11008 Acked-by: Jon Loeliger <jdl@freescale.com>
11010 commit a9398e018593782c5fa7d0741955fc1256b34c1e
11011 Author: Wolfgang Denk <wd@pollux.denx.de>
11012 Date: Mon Nov 27 15:32:42 2006 +0100
11014 Minor code cleanup. Update CHANGELOG.
11016 commit 1729b92cde575476684bffe819d0b7791b57bff2
11017 Author: Stefan Roese <sr@denx.de>
11018 Date: Mon Nov 27 14:52:04 2006 +0100
11020 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
11022 Signed-off-by: Stefan Roese <sr@denx.de>
11024 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
11025 Author: Stefan Roese <sr@denx.de>
11026 Date: Mon Nov 27 14:49:51 2006 +0100
11028 [PATCH] alpr: remove unused board specific flash driver
11030 Signed-off-by: Stefan Roese <sr@denx.de>
11032 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
11033 Author: Stefan Roese <sr@denx.de>
11034 Date: Mon Nov 27 14:48:41 2006 +0100
11036 [PATCH] 4xx: Fix problem with board specific reset code
11038 Signed-off-by: Stefan Roese <sr@denx.de>
11040 commit ec0c2ec725aec9524a177a77ce75559e644a931a
11041 Author: Stefan Roese <sr@denx.de>
11042 Date: Mon Nov 27 14:46:06 2006 +0100
11044 [PATCH] Remove testing 4xx enet PHY setup
11046 Signed-off-by: Stefan Roese <sr@denx.de>
11048 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
11049 Author: Stefan Roese <sr@denx.de>
11050 Date: Mon Nov 27 14:12:17 2006 +0100
11052 [PATCH] Update Prodrive ALPR board support (440GX)
11054 Signed-off-by: Stefan Roese <sr@denx.de>
11056 commit 58b485776698c3d71ec5a215e392123b4c15afa3
11057 Author: Markus Klotzbuecher <mk@denx.de>
11058 Date: Mon Nov 27 11:51:21 2006 +0100
11060 Add a small README with information on the generic ohci driver.
11062 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
11063 Author: Markus Klotzbuecher <mk@denx.de>
11064 Date: Mon Nov 27 11:46:46 2006 +0100
11066 Fix some endianness issues related to the generic ohci driver
11068 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
11069 Author: Markus Klotzbuecher <mk@denx.de>
11070 Date: Mon Nov 27 11:44:58 2006 +0100
11072 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
11073 to choose between the old and the generic OHCI drivers.
11075 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
11076 Author: Markus Klotzbuecher <mk@denx.de>
11077 Date: Mon Nov 27 11:43:09 2006 +0100
11079 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
11080 and adapted board configs TQM5200 and yosemite accordingly. This commit
11081 also makes the maximum number of root hub ports configurable
11082 (CFG_USB_OHCI_MAX_ROOT_PORTS).
11084 commit 78d620ebb5871d252270dedfad60c6568993b780
11085 Author: Wolfgang Denk <wd@atlas.denx.de>
11086 Date: Thu Nov 23 22:58:58 2006 +0100
11088 Updates for TQM5200 modules:
11089 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
11090 - simplify "udate" definitions
11092 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
11093 Author: Stefan Roese <sr@denx.de>
11094 Date: Wed Nov 22 13:20:50 2006 +0100
11096 [PATCH] PPC4xx start.S: Fix for processor errata
11098 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
11099 errata 1.12: 440_33 by moving patch up in code.
11101 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
11102 Signed-off-by: Stefan Roese <sr@denx.de>
11104 commit 4ef6251403f637841000e0fef9e832aa01339822
11105 Author: Stefan Roese <sr@denx.de>
11106 Date: Mon Nov 20 20:39:52 2006 +0100
11108 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
11110 Signed-off-by: Stefan Roese <sr@denx.de>
11112 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
11113 Author: Wolfgang Denk <wd@pollux.denx.de>
11114 Date: Mon Nov 20 10:28:30 2006 +0100
11118 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
11119 Author: Stefan Roese <sr@denx.de>
11120 Date: Mon Nov 13 13:55:24 2006 +0100
11122 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
11124 * Adds support for AMD command set Top Boot flash geometry reversal
11125 * Adds support for reading JEDEC Manufacturer ID and Device ID
11126 * Adds support for displaying command set, manufacturer id and
11127 device ids (flinfo)
11128 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
11129 * Removes outdated change history (refer to git log instead)
11131 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
11132 Signed-off-by: Stefan Roese <sr@denx.de>
11134 commit b21b511d4c50408f4853f46f06b601272196223f
11135 Author: Wolfgang Denk <wd@pollux.denx.de>
11136 Date: Sun Nov 12 21:13:23 2006 +0100
11140 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
11141 Author: Bartlomiej Sieka <tur@semihalf.com>
11142 Date: Sat Nov 11 22:48:22 2006 +0100
11144 Disable the watchdog in the default config for the V38B board.
11146 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
11147 Author: Bartlomiej Sieka <tur@semihalf.com>
11148 Date: Sat Nov 11 22:43:00 2006 +0100
11150 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
11151 group is enabled for USB earlier (in cpu_init_f() instead of
11152 usb_lowlevel_init()).
11154 commit 91650b3e4de688038d4f71279c44858e3e2c6870
11155 Author: Wolfgang Denk <wd@pollux.denx.de>
11156 Date: Mon Nov 6 17:06:36 2006 +0100
11158 Sequential accesses to non-existent memory must be synchronized,
11159 at least on G2 cores.
11161 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
11163 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
11164 Author: Timur Tabi <timur@freescale.com>
11165 Date: Fri Nov 3 19:15:00 2006 -0600
11167 mpc83xx: Update 83xx to use fsl_i2c.c
11169 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
11170 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
11171 Added multiple I2C bus support to fsl_i2c.c.
11173 Signed-off-by: Timur Tabi <timur@freescale.com>
11175 commit d239d74b1c937984bc519083a8e7de373a390f06
11176 Author: Timur Tabi <timur@freescale.com>
11177 Date: Fri Nov 3 12:00:28 2006 -0600
11179 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
11181 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
11182 tree matches the other 8xxx trees.
11184 Signed-off-by: Timur Tabi <timur@freescale.com>
11186 commit f7fb2e703ec9688541416962724adff70a7322cb
11187 Author: Kim Phillips <kim.phillips@freescale.com>
11188 Date: Thu Nov 2 19:47:11 2006 -0600
11190 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
11192 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
11193 Author: Dave Liu <daveliu@freescale.com>
11194 Date: Thu Nov 2 18:05:50 2006 -0600
11196 mpc83xx: Fix the incorrect dcbz operation
11198 The 834x rev1.x silicon has one CPU5 errata.
11200 The issue is when the data cache locked with
11201 HID0[DLOCK], the dcbz instruction looks like no-op inst.
11203 The right behavior of the data cache is when the data cache
11204 Locked with HID0[DLOCK], the dcbz instruction allocates
11207 The 834x rev3.0 and later and 8360 have not this bug inside.
11209 So, when 834x rev3.0/8360 are working with ECC, the dcbz
11210 instruction will corrupt the stack in cache, the processor will
11213 However, the 834x rev1.x can work with ECC with these code,
11214 because the sillicon has this cache bug. The dcbz will not
11215 corrupt the stack in cache.
11216 Really, it is the fault code running on fault sillicon.
11218 This patch fix the incorrect dcbz operation. Instead of
11219 CPU FP writing to initialise the ECC.
11222 * Fix the incorrect dcbz operation instead of CPU FP
11223 writing to initialise the ECC memory. Otherwise, it
11224 will corrupt the stack in cache, The processor will checkstop
11227 Signed-off-by: Dave Liu <daveliu@freescale.com>
11229 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
11230 Author: Kim Phillips <kim.phillips@freescale.com>
11231 Date: Wed Nov 1 00:10:40 2006 -0600
11233 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
11235 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
11236 STDOUT_PATH configuration bits to mpc8349emds,
11237 mpc8349itx, and mpc8360emds board code.
11239 redo environment to use bootm with the fdtaddr
11240 for booting ARCH=powerpc kernels by default,
11241 and provide default fdtaddr values.
11243 commit 48041365b3420589ad464ebc7752e0053538b729
11244 Author: Kim Phillips <kim.phillips@freescale.com>
11245 Date: Wed Nov 1 00:07:25 2006 -0600
11247 mpc83xx: change ft code to modify local-mac-address property
11249 Update 83xx OF code to update local-mac-address properties
11250 for ethernet instead of the obsolete 'address' property.
11252 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
11253 Author: Timur Tabi <timur@freescale.com>
11254 Date: Tue Oct 31 21:23:16 2006 -0600
11256 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
11258 This patch also adds an improved I2C set_speed(), which handles all clock
11261 Signed-off-by: Timur Tabi <timur@freescale.com>
11263 commit ac4b5622ce050b5ee1e154b98df630d778661632
11264 Author: Dave Liu <daveliu@freescale.com>
11265 Date: Tue Oct 31 19:54:59 2006 -0600
11267 mpc83xx: add the README.mpc8360emds
11269 add doc/README.mpc8360emds to accompany the new board support
11271 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
11272 Author: Dave Liu <daveliu@freescale.com>
11273 Date: Fri Nov 3 12:11:15 2006 -0600
11275 mpc83xx: add QE ethernet support
11277 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
11279 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
11280 Author: Dave Liu <daveliu@freescale.com>
11281 Date: Fri Nov 3 19:33:44 2006 -0600
11283 mpc83xx: Add MPC8360EMDS basic board support
11285 Add support for the Freescale MPC8360EMDS board.
11286 Includes DDR, DUART, Local Bus, PCI.
11288 commit 23892e49352de74f7fac36ff90bb1be143d195e3
11289 Author: Dave Liu <daveliu@freescale.com>
11290 Date: Tue Oct 31 19:30:40 2006 -0600
11292 mpc83xx: add the QUICC Engine (QE) immap file
11294 common QE immap file. Also required for 8360.
11296 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
11297 Author: Dave Liu <daveliu@freescale.com>
11298 Date: Tue Oct 31 19:25:38 2006 -0600
11300 mpc83xx: Add 8360 specifics to 83xx immap
11302 Mainly add QE device dependencies, with appropriate 8360 protection.
11305 commit 988833324a7fda482c8ac3ca23eb539f8232e404
11306 Author: Timur Tabi <timur@freescale.com>
11307 Date: Tue Oct 31 19:14:41 2006 -0600
11309 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
11311 PREREQUISITE PATCHES:
11313 * This patch can only be applied after the following patches have been applied:
11315 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
11316 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
11320 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
11321 the clock for the 2nd USB board (Linux kernel will hang otherwise),
11322 and fix the CONFIG_BOOTARGS macro.
11324 Signed-off-by: Timur Tabi <timur@freescale.com>
11326 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
11327 Author: Timur Tabi <timur@freescale.com>
11328 Date: Tue Oct 31 18:44:42 2006 -0600
11330 mpc83xx: Add support for the MPC8349E-mITX
11332 PREREQUISITE PATCHES:
11334 * This patch can only be applied after the following patches have been applied:
11336 1) DNX#2006090742000024 "Add support for multiple I2C buses"
11337 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
11338 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
11339 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
11340 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
11344 * Add support for the Freescale MPC8349E-mITX reference design platform.
11345 The second TSEC (Vitesse 7385 switch) is not supported at this time.
11347 Signed-off-by: Timur Tabi <timur@freescale.com>
11349 commit 183da6d9b446cc12123455844ad1187e2375626f
11350 Author: Ben Warren <bwarren@qstreams.com>
11351 Date: Tue Sep 12 10:15:53 2006 -0400
11353 Additional MPC8349 support for multibus i2c
11357 Here is a patch for a file that was accidentally left out of a previous
11360 It accompanies the patch with ticket DNX#2006090742000024
11363 Change PCI initialization to use new multi-bus I2C API.
11368 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
11369 Author: Ben Warren <bwarren@qstreams.com>
11370 Date: Thu Sep 7 16:51:04 2006 -0400
11372 Multi-bus I2C implementation of MPC834x
11376 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
11377 family and the MPC8349EMDS board in particular.
11378 This patch requires Patch 1 (Add support for multiple I2C buses).
11379 Testing was performed on a 533MHz board.
11381 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
11383 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11386 Implemented driver-level code to support two I2C buses on the
11387 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
11388 are 50kHz, 100kHz and 400kHz on each bus.
11393 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
11394 Author: Ben Warren <bwarren@qstreams.com>
11395 Date: Thu Sep 7 16:50:54 2006 -0400
11397 Add support for multiple I2C buses
11401 Attached is a patch providing support for multiple I2C buses at the
11402 command level. The second part of the patch includes an implementation
11403 for the MPC834x CPU and MPC8349EMDS board.
11405 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
11407 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11411 1. Include new 'i2c' command (based on USB implementation) using
11412 CONFIG_I2C_CMD_TREE.
11414 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
11415 the commands to change bus number and speed are only available under the
11416 new 'i2c' command mentioned in the first bullet.
11418 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
11419 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
11420 of an array of bus-device pairs. Otherwise, it is an array of uchar.
11423 Added new 'i2c' master command for all I2C interaction. This is
11424 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
11425 setting I2C bus speed as well as changing the active bus if the board
11426 has more than one (conditionally compiled with
11427 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
11433 commit bed85caf872714ebf53013967a695c9d63acfc68
11434 Author: Timur Tabi <timur@freescale.com>
11435 Date: Tue Oct 31 18:13:36 2006 -0600
11437 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
11441 * Errata DDR6, which affects all current MPC 834x processors, lists changes
11442 required to maintain compatibility with various types of DDR memory. This
11443 patch implements those changes.
11445 Signed-off-by: Timur Tabi <timur@freescale.com>
11447 commit afd6e470f639883002c7c59d562690a5cb0f4865
11448 Author: Timur Tabi <timur@freescale.com>
11449 Date: Wed Oct 25 18:45:23 2006 -0500
11451 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
11453 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
11454 Author: Timur Tabi <timur@freescale.com>
11455 Date: Tue Aug 22 17:07:00 2006 -0500
11457 mpc83xx: Add support for variable flash memory sizes on 83xx systems
11461 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
11462 window registers, instead of using a hard-coded value of 8MB.
11464 Signed-off-by: Timur Tabi <timur@freescale.com>
11466 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
11467 Author: Tanya Jiang <tanya.jiang@freescale.com>
11468 Date: Thu Aug 3 18:38:13 2006 +0800
11470 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
11472 Unified TQM834x variable names with 83xx and consolidated macro
11473 in preparation for the 8360 and other upcoming 83xx devices.
11475 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
11477 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
11478 Author: Dave Liu <daveliu@freescale.com>
11479 Date: Wed Oct 25 14:41:21 2006 -0500
11481 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
11483 Incorporated the common unified variable names and the changes in preparation
11484 for releasing mpc8360 patches.
11486 Signed-off-by: Dave Liu <daveliu@freescale.com>
11488 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
11489 Author: Tanya Jiang <tanya.jiang@freescale.com>
11490 Date: Thu Aug 3 18:36:02 2006 +0800
11492 mpc83xx: Fix missing build for mpc8349emds pci.c
11494 Make pci build for mpc8349emds
11496 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
11498 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
11499 Author: Tanya Jiang <tanya.jiang@freescale.com>
11500 Date: Thu Aug 3 18:39:49 2006 +0800
11502 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
11504 Removed unused file resetvec.S for mpc83xx cpu
11506 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
11508 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
11509 Author: Nick Spence <Nick.Spence@freescale.com>
11510 Date: Sat Sep 30 00:32:59 2006 -0700
11512 NAND Flash verify across block boundaries
11514 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
11516 and the write crosses a block boundary. The pointer to the verification
11517 buffer (bufstart) is not being updated to reflect the starting of the
11519 block so the verification of the second block fails.
11523 * Fix NAND FLASH page verification across block boundaries
11525 commit f484dc791a3932537213c43c654cc1295c64b84c
11526 Author: Nick Spence <nick.spence@freescale.com>
11527 Date: Thu Sep 7 07:39:46 2006 -0700
11529 Added RGMII support to the TSECs and Marvell 881111 Phy
11531 Added a phy initialization to adjust the RGMII RX and TX timing
11532 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
11534 Signed-off-by: Nick Spence <nick.spence@freescale.com>
11536 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
11537 Author: roy zang <tie-fei.zang@freescale.com>
11538 Date: Fri Nov 3 13:10:00 2006 +0800
11540 Remove some unused CFG define.
11541 undef CFG_DRAM_TEST
11543 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
11544 Author: roy zang <tie-fei.zang@freescale.com>
11545 Date: Fri Nov 3 13:07:36 2006 +0800
11547 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
11548 Both work. 0xFF000000 seems more reasonable.
11550 commit c59200443072353044aa4bf737a5a60f9a9af231
11551 Author: Wolfgang Denk <wd@pollux.denx.de>
11552 Date: Thu Nov 2 15:15:01 2006 +0100
11554 Release U-Boot 1.1.6
11556 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
11557 Author: roy zang <tie-fei.zang@freescale.com>
11558 Date: Thu Nov 2 19:14:48 2006 +0800
11560 This patch comes from Yuli's posted patch on 8/8/2006
11561 titled "CFI Driver Little-Endian write Issue".
11563 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
11565 If that patch applied, please discard this one.
11566 Until now , I do not see his patch is applied. So please apply this one.
11568 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
11569 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11571 commit b825f158e449e1e9cf74c08e572955e122394c96
11572 Author: roy zang <tie-fei.zang@freescale.com>
11573 Date: Thu Nov 2 19:12:31 2006 +0800
11575 Tsi108 on chip i2c support.
11577 The i2c Interface provides a master-only, serial interface that can be
11578 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
11581 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11582 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11584 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
11585 Author: roy zang <tie-fei.zang@freescale.com>
11586 Date: Thu Nov 2 19:11:06 2006 +0800
11588 Tsi108 on chip pci controller support.
11590 If there is no pci card, the tsi108/109 pci configure read will
11591 cause a machine check exception to the processor. PCI error should
11592 also be cleared after the read.
11594 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11595 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11597 commit d1927cee977126e547ceeba23e4f978f377cfb8f
11598 Author: roy zang <tie-fei.zang@freescale.com>
11599 Date: Thu Nov 2 19:08:55 2006 +0800
11601 Tundra tsi108 on chip Ethernet controller support.
11603 The following is a brief description of the Ethernet controller:
11604 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
11605 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
11606 to manage the two physical connection devices (PHYs). Each Ethernet port
11607 has its own statistics monitor that tracks and reports key interface
11608 statistics. Each port supports a 256-entry hash table for address
11609 filtering. In addition, each port is bridged to the Switch Fabric
11610 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
11612 Each Ethernet port also has a pair of internal Ethernet DMA channels to
11613 support the transmit and receive data flows. The Ethernet DMA channels
11614 use descriptors set up in memory, the memory map of the device, and
11615 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
11616 handles arbitration for the Switch Fabric. The Controller also
11617 has a register businterface for register accesses and status monitor
11620 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
11621 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
11622 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
11623 data flows to and from the Ethernet Controller through the Switch Fabric.
11625 Each Ethernet port uses its transmit and receive DMA channels to manage
11626 data flows through buffer descriptors that are predefined by the
11627 system (the descriptors can exist anywhere in the system memory map).
11628 These descriptors are data structures that point to buffers filled
11629 with data ready to transmit over Ethernet, or they point to empty
11630 buffers ready to receive data from Ethernet.
11632 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11633 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11635 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
11636 Author: roy zang <tie-fei.zang@freescale.com>
11637 Date: Thu Nov 2 19:01:33 2006 +0800
11639 Tundra tsi108 header file.
11641 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
11642 PowerPC processors that offers numerous system interconnect options for
11643 embedded application designers. The Tsi108 can interconnect 60x or
11644 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
11645 and Flash. Provided the macro define for tsi108 chip.
11647 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11648 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11650 commit 87c4db09699c6b89176b31004afcb83eb1585d47
11651 Author: roy zang <tie-fei.zang@freescale.com>
11652 Date: Thu Nov 2 18:59:15 2006 +0800
11654 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
11655 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
11657 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11658 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11660 commit 27801b8ab11c61b577e45742a515bb3b23b80241
11661 Author: roy zang <tie-fei.zang@freescale.com>
11662 Date: Thu Nov 2 18:57:21 2006 +0800
11664 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
11665 Make ,config.mk and link file for the mpc7448hpc2 board.
11667 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11668 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11670 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
11671 Author: roy zang <tie-fei.zang@freescale.com>
11672 Date: Thu Nov 2 18:55:04 2006 +0800
11674 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
11675 The mpc7448hpc2 board support header file.
11677 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11678 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11680 commit 625bb5ddb50b243f931262ca8c46956409471917
11681 Author: roy zang <tie-fei.zang@freescale.com>
11682 Date: Thu Nov 2 18:52:21 2006 +0800
11684 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
11685 The mpc7448hpc2 board support low level assemble language init code.
11687 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11688 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11690 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
11691 Author: roy zang <tie-fei.zang@freescale.com>
11692 Date: Thu Nov 2 18:49:51 2006 +0800
11694 General code modification for mpc7448hpc2 board support.
11695 1. Add 7447A and 7448 processor support.
11696 2. Add the following flags.
11698 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
11699 (such as by switch on board), this flag should be set.
11701 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
11702 relocates to RAM, this flag should be set.
11704 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
11705 system hang in exception, this flag should be set.
11707 There is a design issue for tsi108/109 pci configure read. When pci scan
11708 the slots, if there is no pci card, the tsi108/9 will cause a machine
11709 check exception for mpc7448 processor.
11711 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
11712 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11714 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
11715 Author: roy zang <tie-fei.zang@freescale.com>
11716 Date: Thu Nov 2 18:34:47 2006 +0800
11718 Add README file for mpc7448hpc2 board.
11719 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11721 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
11722 Author: Bartlomiej Sieka <tur@semihalf.com>
11723 Date: Wed Nov 1 02:04:38 2006 +0100
11725 Finish up support for MarelV38B board
11726 - add watchdog support
11727 - enable GPIO_WKUP_7 pin for input
11730 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
11731 Author: Bartlomiej Sieka <tur@semihalf.com>
11732 Date: Wed Nov 1 01:45:46 2006 +0100
11734 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
11735 * remove warnings when compiling ethaddr.c
11736 * adjust linker script (fixes a crash resulting from incorrect
11737 definition of __u_boot_cmd_start)
11738 - Some MarelV38B code cleanup.
11740 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
11741 Author: Bartlomiej Sieka <tur@semihalf.com>
11742 Date: Wed Nov 1 01:38:16 2006 +0100
11744 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
11745 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
11746 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
11747 MPC5XXX_WU_GPIO_DATA_O for affected boards.
11749 - Add defintions for some MPC5XXX GPIO pins.
11751 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
11752 Author: Bartlomiej Sieka <tur@semihalf.com>
11753 Date: Wed Nov 1 01:34:29 2006 +0100
11755 Changed MarelV38B board make target to lowercase. Config file cleanup.
11757 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
11758 Author: Wolfgang Denk <wd@pollux.denx.de>
11759 Date: Sun Oct 29 01:03:51 2006 +0200
11761 Automatically adjust ARFLAGS so "make -s" is really silent.
11763 commit fae684e89844856383bdf101440889557df3e6b1
11764 Author: Stefan Roese <sr@denx.de>
11765 Date: Sat Oct 28 16:45:00 2006 +0200
11767 [PATCH] omap925.c: Remove unused functions
11769 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
11770 Signed-off-by: Stefan Roese <sr@denx.de>
11772 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
11773 Author: Stefan Roese <sr@denx.de>
11774 Date: Sat Oct 28 17:12:58 2006 +0200
11776 [PATCH] Add some missing machtypes for netstar & voiceblue boards
11778 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
11781 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
11782 Signed-off-by: Stefan Roese <sr@denx.de>
11784 commit 856f054410cef52d868feb330168b2a4c4091328
11785 Author: Stefan Roese <sr@denx.de>
11786 Date: Sat Oct 28 15:55:52 2006 +0200
11788 [PATCH] NAND: Partition name support added to NAND subsystem
11790 chpart, nboot and NAND subsystem related commands now accept also partition
11791 name to specify offset.
11793 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
11794 Signed-off-by: Stefan Roese <sr@denx.de>
11796 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
11797 Author: Wolfgang Denk <wd@pollux.denx.de>
11798 Date: Sat Oct 28 02:29:44 2006 +0200
11802 commit 2751a95abd1b96911081c357e96a12fa97b40dee
11803 Author: Wolfgang Denk <wd@pollux.denx.de>
11804 Date: Sat Oct 28 02:29:14 2006 +0200
11806 Enable commandline editing and hush shell on all TQM boards.
11808 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
11809 Author: Wolfgang Denk <wd@pollux.denx.de>
11810 Date: Sat Oct 28 02:28:02 2006 +0200
11812 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
11814 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
11815 Author: Wolfgang Denk <wd@denx.de>
11816 Date: Sat Oct 28 01:14:32 2006 +0200
11818 Check for illegal character '=' in environment variable names.
11820 Make sure the string passed as variable name does not contain a '='
11821 character. This not only prevents the common error or typing
11822 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
11823 also closes a backdoor which allowed to delete write-protected
11824 environment variables, for example by using "setenv ethaddr=".
11826 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
11827 Author: Wolfgang Denk <wd@pollux.denx.de>
11828 Date: Sat Oct 28 00:38:39 2006 +0200
11830 Minor code cleanup.
11832 commit e11887a77d81077416a2d1c5e0354916fee8c034
11833 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11834 Date: Thu Oct 26 17:55:31 2006 +0200
11836 Don't pass any debug options directly to the assembler
11838 When passing the -g option to gcc, gcc automatically selects a
11839 suitable --g<format> option to pass on to the assembler.
11840 Thus, there's no point in forcing a specific debug option on the
11841 assembler using the -Wa mechanism.
11843 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11845 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
11846 Author: Jon Loeliger <jdl@freescale.com>
11847 Date: Fri Oct 27 07:47:22 2006 -0500
11849 MPC86xx: Cleaned up unused and conditionally used local variables.
11851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11853 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
11854 Author: Wolfgang Denk <wd@pollux.denx.de>
11855 Date: Fri Oct 27 11:55:21 2006 +0200
11857 Fix "ar" flags in some Makefiles to allow for silent "make -s"
11859 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
11860 Author: Ben Warren <bwarren@qstreams.com>
11861 Date: Thu Oct 26 14:38:25 2006 -0400
11863 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
11864 to a TSEC (e.g. a switch is connected via RMII) or
11865 if the PHY is defective/incorrectly configured.
11867 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11869 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
11870 Author: Ben Warren <bwarren@qstreams.com>
11871 Date: Thu Oct 26 14:38:25 2006 -0400
11873 Fix TSEC driver: avoid crashes if PHY is not attached
11874 to a TSEC (e.g. a switch is connected via RMII) or
11875 if the PHY is defective/incorrectly configured.
11877 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11879 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
11880 Author: Wolfgang Denk <wd@pollux.denx.de>
11881 Date: Thu Oct 26 16:24:31 2006 +0200
11885 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
11886 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11887 Date: Wed Oct 25 15:48:59 2006 +0200
11889 Finish up support for the ATSTK1000/ATSTK1002 boards
11891 Add atstk1002_config target to Makefile and move the AVR32 section
11892 down below Blackfin so that it doesn't end up in the middle of
11895 Drop the autogenerated linker script thing for now. Will have to
11896 revisit how to handle chips with different flash and RAM layout
11899 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11901 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
11902 Author: Kumar Gala <galak@kernel.crashing.org>
11903 Date: Tue Oct 24 23:47:37 2006 -0500
11905 Added support for Multi-Image files that contain a device tree
11907 If a Multi-Image file contains a third image we try to use it as a
11908 device tree. The device tree image is assumed to be uncompressed in the
11909 image file. We automatically allocate space for the device tree in memory
11910 and provide an 8k pad to allow more than a reasonable amount of growth.
11912 Additionally, a device tree that was contained in flash will now automatically
11913 get copied to system memory as part of boot. Previously an error was
11914 reported if one tried to boot a device tree that was in flash.
11916 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11918 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
11919 Author: Wolfgang Denk <wd@denx.de>
11920 Date: Tue Oct 24 21:35:55 2006 +0200
11922 Switch to automatically generated CHANGELOG file.
11923 (use "make CHANGELOG" to update it from time to time)
11925 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
11926 Author: Stefan Roese <sr@denx.de>
11927 Date: Tue Oct 24 18:06:48 2006 +0200
11929 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
11930 Patch by Stefan Roese, 24 Oct 2006
11932 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
11933 Author: Wolfgang Denk <wd@pollux.denx.de>
11934 Date: Tue Oct 24 17:24:55 2006 +0200
11936 Merge with /home/wd/git/u-boot/master
11938 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
11939 Author: Wolfgang Denk <wd@pollux.denx.de>
11940 Date: Tue Oct 24 15:32:57 2006 +0200
11944 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
11945 Author: Wolfgang Denk <wd@pollux.denx.de>
11946 Date: Tue Oct 24 14:51:36 2006 +0200
11948 Move atstk1000 files into vendor specific directory.
11949 Patch by Haavard Skinnemoen, 12 Sep 2006
11951 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
11952 Author: Wolfgang Denk <wd@pollux.denx.de>
11953 Date: Tue Oct 24 14:42:37 2006 +0200
11955 Add ATSTK1000 and ATSTK1002 board support
11956 Patch by Haavard Skinnemoen, 06 Sep 2006
11958 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
11961 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
11962 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
11963 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
11964 CompactFlash cards. For more information, please see this page:
11966 http://www.atmel.com/dyn/products/tools.asp?family_id=682
11968 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
11971 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11973 commit f93ae788c3640fcde5db383471d45548ff4060d0
11974 Author: Wolfgang Denk <wd@pollux.denx.de>
11975 Date: Tue Oct 24 14:31:24 2006 +0200
11977 Add common serial driver for Atmel AT32 and AT91 chips
11978 Patch by Haavard Skinnemoen, 06 Sep 2006
11980 This is a first attempt at creating a common serial driver for Atmel
11981 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
11982 be possible to support AT91RM9200 and other ARM-based chips with some
11983 minor modifications.
11985 There's nothing fundamentally AVR32-specific in this driver, but it
11986 does use some features which are currently only defined for the
11988 * pm_get_clock_freq: Obtain the clock frequency of a given domain
11989 * gd->console_uart: A "struct device" containing information about
11990 register mappings, gpio resources and clocks associated with the
11993 For more information about these features, please see the "AT32AP
11996 commit 72a087e04705c26cad982879ebd06b5281bf825a
11997 Author: Wolfgang Denk <wd@pollux.denx.de>
11998 Date: Tue Oct 24 14:27:35 2006 +0200
12000 Add AT32AP CPU and AT32AP7000 SoC support
12001 Patch by Haavard Skinnemoen, 06 Sep 2006
12003 This patch adds support for the AT32AP CPU family and the AT32AP7000
12004 chip, which is the first chip implementing the AVR32 architecture.
12006 The AT32AP CPU core is a high-performance implementation featuring a
12007 7-stage pipeline, separate instruction- and data caches, and a MMU.
12008 For more information, please see the "AVR32 AP Technical Reference":
12010 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
12012 In addition to this, the AT32AP7000 chip comes with a large set of
12013 integrated peripherals, many of which are shared with the AT91 series
12014 of ARM-based microcontrollers from Atmel. Full data sheet is
12017 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
12019 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12021 commit 7b64fef33c66be648826c0ff9758298ef13d0604
12022 Author: Wolfgang Denk <wd@pollux.denx.de>
12023 Date: Tue Oct 24 14:21:16 2006 +0200
12025 Add AVR32 architecture support
12026 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
12028 This patch adds common infrastructure code for the Atmel AVR32
12029 architecture. See doc/README.AVR32 for details.
12031 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12033 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
12034 Author: Wolfgang Denk <wd@pollux.denx.de>
12035 Date: Tue Oct 24 13:57:33 2006 +0200
12037 Use -g instead of -gstabs in AFLAGS_DEBUG
12038 Patch by Haavard Skinnemoen, 30 Aug 2006
12040 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
12041 matter what the target's preferred debugging format is. This patch
12042 simply replaces -gstabs with -g, so that the default debugging format
12043 for the architecture is used.
12045 commit 965829872169c2996023840d98e1d85ad148d629
12046 Author: Wolfgang Denk <wd@pollux.denx.de>
12047 Date: Tue Oct 24 13:55:18 2006 +0200
12049 Fix/workaround broken dependency handling with make 3.81
12050 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
12052 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
12053 Author: Marian Balakowicz <m8@semihalf.com>
12054 Date: Mon Oct 23 22:17:05 2006 +0200
12056 Fix sequoia separate object direcory building problems.
12058 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
12059 Author: Jon Loeliger <jdl@freescale.com>
12060 Date: Fri Oct 20 17:16:35 2006 -0500
12062 Use generic I2C register block on 85xx and 86xx.
12064 Replace private IMMAP I2C structures with generic reg block
12065 and allow 86xx to have multiple I2C device busses.
12067 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12069 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
12070 Author: Jon Loeliger <jdl@freescale.com>
12071 Date: Fri Oct 20 15:54:34 2006 -0500
12073 Fix compilation warnings on a few 85xx boards.
12075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12077 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
12078 Author: Jon Loeliger <jdl@freescale.com>
12079 Date: Fri Oct 20 15:50:15 2006 -0500
12081 Converted all 85xx boards to use a common FSL I2C driver.
12082 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
12083 And removed hard i2c path from a few u-boot.lds scipts too.
12084 Minor whitespace cleanups along the way.
12086 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12088 commit 4d45f69e362b05892c9e92a7907e5820995612aa
12089 Author: Jon Loeliger <jdl@freescale.com>
12090 Date: Thu Oct 19 12:02:24 2006 -0500
12092 Rewrite a series of goto statements as a sequences of
12093 conditional expressions instead.
12095 Use consistent return code 0/-1 for good/bad indicators.
12097 Include one fewer file if the driver isn't used at all.
12099 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12101 commit 7237c033b02fe295880435f1eb80819a0c987532
12102 Author: Jon Loeliger <jdl@freescale.com>
12103 Date: Thu Oct 19 11:02:16 2006 -0500
12105 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
12107 in an effort to begin to unify the umpteen FSL I2C drivers that
12108 are all otherwise very similar.
12110 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12112 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
12113 Author: Jon Loeliger <jdl@freescale.com>
12114 Date: Thu Oct 19 11:33:52 2006 -0500
12116 * Fix a bunch of compiler warnings for gcc 4.0
12118 Signed-off-by: Matthew McClintock <msm@freescale.com>
12120 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
12121 Author: Stefan Roese <sr@denx.de>
12122 Date: Tue Oct 17 06:14:31 2006 +0200
12124 Add monitor functions for indirect access to PPC440 DCR's
12125 Patch by Leonid Baryudin, 12 Oct 2006
12127 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
12128 Author: Jon Loeliger <jdl@freescale.com>
12129 Date: Fri Oct 13 16:47:53 2006 -0500
12131 Fixed leading whitespace issues.
12132 Removed spurious LAWAR thing.
12134 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12136 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
12137 Author: Jon Loeliger <jdl@freescale.com>
12138 Date: Thu Oct 12 10:42:36 2006 -0500
12140 Remove unneeded include files and local variable.
12142 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12144 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
12145 Author: Grant Likely <grant.likely@secretlab.ca>
12146 Date: Tue Oct 10 00:23:32 2006 -0600
12148 Fix possible uninitialized variable compiler warning.
12150 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
12151 do_bootm_linux() may be uninitialized. There is no possibility in the
12152 current code that len will get used uninitialized, but this fix follows
12153 the existing convention of setting both len and data to zero at the same
12156 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12158 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
12159 Author: Matthew McClintock <msm@freescale.com>
12160 Date: Wed Oct 11 15:13:01 2006 -0500
12162 * Fix a bunch of compiler warnings for gcc 4.0
12164 Signed-off-by: Matthew McClintock <msm@freescale.com>
12166 commit bf651baa365e5447246aad6a633ccd667cf24a39
12167 Author: Jon Loeliger <jdl@freescale.com>
12168 Date: Wed Oct 11 10:10:43 2006 -0500
12170 Move "ar" flags to config.mk to allow for silent "make -s"
12172 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
12173 Author: Jon Loeliger <jdl@freescale.com>
12174 Date: Tue Oct 10 17:19:03 2006 -0500
12176 Coding style changes to remove local varible blocks
12177 and reformat a bit nicer.
12179 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
12180 Author: Jon Loeliger <jdl@freescale.com>
12181 Date: Tue Oct 10 17:16:04 2006 -0500
12183 Fix whitespace issues.
12185 commit 7b382b7125f2397cce63253df62f183e3dfa2770
12186 Author: Jon Loeliger <jdl@freescale.com>
12187 Date: Tue Oct 10 17:14:45 2006 -0500
12189 Fix whitespace issues.
12191 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
12192 Author: Jon Loeliger <jdl@freescale.com>
12193 Date: Tue Oct 10 17:06:53 2006 -0500
12195 Fix whitespace issues.
12197 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
12198 Author: Jon Loeliger <jdl@freescale.com>
12199 Date: Tue Oct 10 17:03:43 2006 -0500
12201 Ran lindent and cleaned up whitespace issues.
12202 Format for 80-columns too.
12204 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
12205 Author: Jon Loeliger <jdl@freescale.com>
12206 Date: Tue Oct 10 17:02:22 2006 -0500
12208 Fix whitespace and 80-col issues.
12210 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
12211 Author: Stefan Roese <sr@denx.de>
12212 Date: Sat Oct 7 11:36:51 2006 +0200
12214 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
12215 Patch by Stefan Roese, 07 Oct 2006
12217 commit 5bc528fa4da751d472397b308137238a6465afd2
12218 Author: Stefan Roese <sr@denx.de>
12219 Date: Sat Oct 7 11:35:25 2006 +0200
12221 Update ALPR code (NAND support working now)
12222 Patch by Stefan Roese, 07 Oct 2006
12224 commit 77d5034847d328753b80c46b83f960a14a26f40e
12225 Author: Stefan Roese <sr@denx.de>
12226 Date: Sat Oct 7 11:33:03 2006 +0200
12228 Remove compile warnings in fpga code
12229 Patch by Stefan Roese, 07 Oct 2006
12231 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
12232 Author: Stefan Roese <sr@denx.de>
12233 Date: Sat Oct 7 11:30:52 2006 +0200
12235 Add CONFIG_BOARD_RESET to configure board specific reset function
12236 Patch by Stefan Roese, 07 Oct 2006
12238 commit f55df18187e7a45cb73fec4370d12135e6691ae1
12239 Author: John Traill <john.traill@freescale.com>
12240 Date: Fri Sep 29 08:23:12 2006 +0100
12242 Fix missing tCycle/modfreq calculation.
12244 Signed-off-by: John Traill <john.traill@freescale.com>
12246 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
12247 Author: Andy Fleming <afleming@freescale.com>
12248 Date: Wed Sep 13 10:33:35 2006 -0500
12250 Updated config headers to add default FDT-based booting
12252 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
12253 Author: Andy Fleming <afleming@freescale.com>
12254 Date: Wed Sep 13 10:34:18 2006 -0500
12256 Add support for eTSEC 3 & 4 on 8548 CDS
12258 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
12259 This will only work on rev 1.3 boards (but doesn't break older boards)
12260 * Cleaned up some comments to reflect the expanded role of tsec
12263 commit 084d648b109c8984f83674043c1a7fa3885ef801
12264 Author: Andy Fleming <afleming@freescale.com>
12265 Date: Wed Sep 13 10:33:56 2006 -0500
12267 Added code to support 2.6.18 PCI changes in u-boot
12269 * Added code to swizzle the IRQ map for the PCI
12271 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
12272 Author: Jon Loeliger <jdl@freescale.com>
12273 Date: Tue Sep 19 09:34:10 2006 -0500
12275 Modified makefile for new build mechanism.
12277 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12279 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
12280 Author: Jon Loeliger <jdl@freescale.com>
12281 Date: Thu Sep 14 08:40:36 2006 -0500
12283 Handle 86xx SVR values according to the new Reference Manual.
12284 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
12285 by the byte in bits 16-23 instead.
12286 Thanks to Jason Jin for noticing.
12288 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12290 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
12291 Author: Zhang Wei <wei.zhang@freescale.com>
12292 Date: Mon Aug 28 14:25:31 2006 +0800
12294 Fixed an OF-tree off-by-one bug when adding a new property name.
12295 This bug will cause the kernel booting to pause a long time.
12297 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12298 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
12300 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
12301 Author: Jon Loeliger <jdl@freescale.com>
12302 Date: Tue Aug 29 11:05:09 2006 -0500
12304 Remove trailing empty lines.
12306 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
12307 Author: Jon Loeliger <jdl@freescale.com>
12308 Date: Tue Aug 29 09:48:49 2006 -0500
12310 Remove bogus msync and use volatile asm.
12312 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
12313 Author: Jon Loeliger <jdl@freescale.com>
12314 Date: Tue Aug 29 08:17:14 2006 -0500
12316 Add myself as maintainer for MPC8641HPCN.
12318 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
12319 Author: Zhang Wei <wei.zhang@freescale.com>
12320 Date: Mon Aug 28 14:25:31 2006 +0800
12322 Fixed an OF-tree off-by-one bug when adding a new property name.
12323 This bug will cause the kernel booting to pause a long time.
12325 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12327 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
12328 Author: Haiying Wang <haiying.wang@freescale.com>
12329 Date: Fri Aug 25 14:38:34 2006 -0400
12331 Change ramdiskaddr and dtbaddr
12332 Remove PEX fluff commands.
12334 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
12335 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12337 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
12338 Author: Matthew McClintock <msm@freescale.com>
12339 Date: Wed Aug 23 13:32:45 2006 -0500
12341 * Another small fix for booting with disable_of
12343 Signed-off-by: Matthew McClintock <msm@freescale.com>
12345 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
12346 Author: Jon Loeliger <jdl@freescale.com>
12347 Date: Wed Aug 23 11:04:43 2006 -0500
12349 Cleanup and lindent new AHCI driver.
12351 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
12352 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
12353 Date: Wed Aug 23 19:15:12 2006 +0800
12355 Add AHCI define and sata support for MPC8641HPCN board.
12357 Signed-off-by:Jason Jin<jason.jin@freescale.com>
12359 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
12360 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
12361 Date: Wed Aug 23 19:10:44 2006 +0800
12363 Add AHCI support to u-boot
12365 Add AHCI support in u-boot, enable the sata disk controllers which
12366 following the AHCI protocol.
12368 Signed-off-by:Jason Jin<jason.jin@freescale.com>
12370 commit d8ea2acf5f137cae99417df4f573d036ee384668
12371 Author: Zhang Wei <wei.zhang@freescale.com>
12372 Date: Wed Aug 23 17:54:32 2006 +0800
12374 Add dtb boot-up parameter to default boot commands.
12376 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12378 commit b93775c2036b99baa390ea425c4771895bbc63c4
12379 Author: Jon Loeliger <jdl@freescale.com>
12380 Date: Tue Aug 22 18:26:08 2006 -0500
12382 Cleanup even more poorly introduced whitespace.
12384 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
12385 Author: Jon Loeliger <jdl@freescale.com>
12386 Date: Tue Aug 22 18:07:00 2006 -0500
12388 Cleanup more poorly introduced whitespace.
12390 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
12391 Author: Jon Loeliger <jdl@freescale.com>
12392 Date: Tue Aug 22 17:54:05 2006 -0500
12394 Cleanup poorly introduced whitespace.
12396 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
12397 Author: Jon Loeliger <jdl@freescale.com>
12398 Date: Tue Aug 22 12:25:27 2006 -0500
12400 General indent and whitespace cleanups.
12402 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
12403 Author: Jon Loeliger <jdl@freescale.com>
12404 Date: Tue Aug 22 12:06:18 2006 -0500
12406 General indent and whitespace cleanups.
12408 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
12409 Author: Jon Loeliger <jdl@freescale.com>
12410 Date: Tue Aug 22 10:42:21 2006 -0500
12412 Cleanup compiler warnings.
12414 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
12415 Author: Matthew McClintock <msm@freescale.com>
12416 Date: Tue Aug 22 09:31:59 2006 -0500
12418 Fix disable_of booting
12420 Signed-off-by: Matthew McClintock <msm@freescale.com>
12422 commit 87a449c8ac396420cb24260f717ea9e6faa82047
12423 Author: Matthew McClintock <msm@freescale.com>
12424 Date: Tue Aug 22 09:23:55 2006 -0500
12426 Support for FDT in uImage format, error when using FDT from flash
12428 Signed-off-by: Matthew McClintock <msm@freescale.com>
12430 commit 75c299c38369d01addd5e054b8a16217b70f4a86
12431 Author: Haiying Wang <haiying.wang@freescale.com>
12432 Date: Tue Aug 15 15:12:55 2006 -0400
12434 Unlock cache before kernel starts up for MPC86xx
12436 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
12437 Author: Haiying Wang <haiying.wang@freescale.com>
12438 Date: Tue Aug 15 15:13:15 2006 -0400
12440 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
12442 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
12443 Author: Haiying Wang <haiying.wang@freescale.com>
12444 Date: Tue Aug 15 15:12:55 2006 -0400
12446 Unlock cache before kernel starts up for MPC86xx
12448 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
12449 Author: Haiying Wang <haiying.wang@freescale.com>
12450 Date: Tue Aug 15 15:13:15 2006 -0400
12452 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
12454 commit 86c8e17f25e972a7e272950a0735fad84e082b88
12455 Author: Matthew McClintock <msm@freescale.com>
12456 Date: Wed Aug 16 13:59:47 2006 -0500
12458 * Fix disable_of booting
12460 Signed-off-by: Matthew McClintock <msm@freescale.com>
12462 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
12463 Author: Matthew McClintock <msm@freescale.com>
12464 Date: Wed Aug 16 10:54:09 2006 -0500
12466 * Support for FDT in uImage format, error when using FDT from flash
12468 Signed-off-by: Matthew McClintock <msm@freescale.com>
12470 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
12471 Author: Stefan Roese <sr@denx.de>
12472 Date: Tue Aug 15 14:22:35 2006 +0200
12474 Add initial support for the ALPR board from Prodrive
12475 NAND needs some additional testing
12476 Patch by Heiko Schocher, 15 Aug 2006
12478 commit f0ff4692ff3372dec55074a8eb444943ab095abb
12479 Author: Stefan Roese <sr@denx.de>
12480 Date: Tue Aug 15 14:15:51 2006 +0200
12482 Add FPGA Altera Cyclone 2 support
12483 Patch by Heiko Schocher, 15 Aug 2006
12485 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
12486 Author: Jon Loeliger <jdl@freescale.com>
12487 Date: Mon Aug 14 15:33:38 2006 -0500
12489 Fix BAT0 to actually be cacheable, non-guarded as documented.
12491 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12493 commit 40bc83559db5745681909fd7382ae509567e116d
12494 Author: Jon Loeliger <jdl@freescale.com>
12495 Date: Wed Aug 9 15:32:16 2006 -0500
12497 Removed MPC8641HPCN DTS source file from build.
12498 It is no longer linked into U-Boot; its sources are
12499 now located in the kernel tree.
12501 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12503 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
12504 Author: Matthew McClintock <msm@freescale.com>
12505 Date: Wed Jun 28 10:47:03 2006 -0500
12507 * Switched default PCI speed for 8540 ADS back to 33MHz
12509 * Added comments and a printf to warn that PCI-X won't
12511 Patch by Andy Fleming 17-Mar-2006
12513 Signed-off-by: Andy Fleming <afleming@freescale.com>
12515 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
12516 Author: Matthew McClintock <msm@freescale.com>
12517 Date: Wed Jun 28 10:46:35 2006 -0500
12519 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
12521 Signed-off-by: Andy Fleming <afleming@freescale.com>
12523 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
12524 Author: Matthew McClintock <msm@freescale.com>
12525 Date: Wed Jun 28 10:46:13 2006 -0500
12527 * Added VIA configuration table
12529 * Added support for PCI2 on CDS
12530 Patch by Andy Fleming 17-Mar-2006
12532 Signed-off-by: Andy Fleming <afleming@freescale.com>
12534 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
12535 Author: Matthew McClintock <msm@freescale.com>
12536 Date: Wed Jun 28 10:45:41 2006 -0500
12538 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
12540 Signed-off-by: Andy Fleming <afleming@freescale.com>
12542 commit 97074ed9655309b64231bc2cee69fe85399f8055
12543 Author: Matthew McClintock <msm@freescale.com>
12544 Date: Wed Jun 28 10:45:17 2006 -0500
12546 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
12548 Signed-off-by: Andy Fleming <afleming@freescale.com>
12550 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
12551 Author: Matthew McClintock <msm@freescale.com>
12552 Date: Wed Jun 28 10:44:49 2006 -0500
12554 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
12556 Signed-off-by: Andy Fleming <afleming@freescale.com>
12558 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
12559 Author: Matthew McClintock <msm@freescale.com>
12560 Date: Wed Jun 28 10:44:23 2006 -0500
12562 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
12564 Signed-off-by: Andy Fleming <afleming@freescale.com>
12566 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
12567 Author: Matthew McClintock <msm@freescale.com>
12568 Date: Wed Jun 28 10:43:36 2006 -0500
12570 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
12572 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12574 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
12575 Author: Matthew McClintock <msm@freescale.com>
12576 Date: Wed Jun 28 10:43:00 2006 -0500
12578 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
12580 commit 5498d90312aad9f6bdbf047986027c35b03cd163
12581 Author: Matthew McClintock <msm@freescale.com>
12582 Date: Wed Jun 28 10:42:24 2006 -0500
12584 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
12586 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
12587 Author: Matthew McClintock <msm@freescale.com>
12588 Date: Wed Jun 28 10:41:37 2006 -0500
12590 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
12592 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
12593 Author: John Traill <john.traill@freescale.com>
12594 Date: Wed Aug 9 14:33:50 2006 +0100
12596 Add Rapidio support for the MPC8641HPCN
12598 Signed-off-by: John Traill <john.traill@freescale.com>
12600 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
12601 Author: John Traill <john.traill@freescale.com>
12602 Date: Tue Aug 8 11:32:43 2006 +0100
12604 Fix caslat calculation
12606 Signed-off-by: John Traill <john.traill@freescale.com>
12608 commit 709d3073e74153278e7904a70819bbef7df50e1a
12609 Author: Jon Loeliger <jdl@freescale.com>
12610 Date: Thu Aug 3 16:17:56 2006 -0500
12612 Convert to mac-address in ethernet nodes.
12614 commit 71748af833ca1017edf1415be376366ff2937d17
12615 Author: Haiying Wang <haiying.wang@freescale.com>
12616 Date: Fri Jul 28 12:41:35 2006 -0400
12618 Correct the irq value of DUART2
12620 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
12621 Author: Haiying Wang <haiying.wang@freescale.com>
12622 Date: Fri Jul 28 12:41:41 2006 -0400
12624 Change the space size of PEX IO in README
12626 commit 239db37c94f7a92941c4465feceb867c609241c5
12627 Author: Haiying Wang <haiying.wang@freescale.com>
12628 Date: Fri Jul 28 12:41:18 2006 -0400
12630 Move get_board_sys_clk to board directory
12632 commit 492900b985439fbce1a118afde1e35def870db03
12633 Author: John Traill <john.traill@freescale.com>
12634 Date: Fri Jul 28 09:03:54 2006 +0100
12636 Fix 8641HPCN pollution
12638 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
12639 Author: John Traill <john.traill@freescale.com>
12640 Date: Fri Jul 28 08:16:06 2006 +0100
12642 Fix 8641HPCN timebase
12644 commit c86360b830f1eecd7a72208575dde4f57879faea
12645 Author: Zhang Wei <wei.zhang@freescale.com>
12646 Date: Fri Jul 28 00:01:34 2006 +0800
12648 Fixed OF device tree of mpc86xxhpcn board.
12650 The changes works in with kernel irq mapping rework.
12652 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12654 commit bea3f28d285942bf3f7ab339ce85178ded544225
12655 Author: Haiying Wang <haiying.wang@freescale.com>
12656 Date: Wed Jul 12 10:48:05 2006 -0400
12658 Add support for reading and writing mac addresses to or from ID EEPROM.
12660 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
12661 With attached patch, we can use command "mac/mac read/mac save/"
12662 to read and write EEPROM under u-boot prompt.
12664 U-boot will calculate the checksum of EEPROM while bootup,
12665 if it is right, then u-boot will check whether the mac address
12666 of eTSEC0/1/2/3 is availalbe (non-zero).
12668 If there is mac address availabe in EEPROM, u-boot will use it,
12669 otherewise, u-boot will use the mac address defined in
12670 MPC8641HPCN.h. This matches the requirement to set unique mac address
12671 for each TSEC port.
12673 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
12674 Signed-off-by: York Sun <yorksun@freescale.com>
12676 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
12677 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
12678 Date: Thu Jul 13 10:35:10 2006 -0500
12680 Fixed initrd issue by define big RAM
12682 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
12684 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
12685 Author: Jason Jin <Jason.jin@freescale.com>
12686 Date: Fri Jul 7 10:01:45 2006 -0500
12688 We made a u-boot patch to fix the hang up issue
12689 when booting filesystem from ramdisk.
12691 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
12693 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
12694 Author: Matthew McClintock <msm@freescale.com>
12695 Date: Wed Jun 28 10:47:03 2006 -0500
12697 * Switched default PCI speed for 8540 ADS back to 33MHz
12698 * Added comments and a printf to warn that PCI-X won't
12700 Patch by Andy Fleming 17-Mar-2006
12702 Signed-off-by: Andy Fleming <afleming@freescale.com>
12704 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
12705 Author: Matthew McClintock <msm@freescale.com>
12706 Date: Wed Jun 28 10:46:35 2006 -0500
12708 * Fixed a bug where 8555 PCI code used the old variable and
12710 Patch by Andy Fleming 17-Mar-2006
12712 Signed-off-by: Andy Fleming <afleming@freescale.com>
12714 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
12715 Author: Matthew McClintock <msm@freescale.com>
12716 Date: Wed Jun 28 10:46:13 2006 -0500
12718 * Added VIA configuration table
12719 * Added support for PCI2 on CDS
12720 Patch by Andy Fleming 17-Mar-2006
12722 Signed-off-by: Andy Fleming <afleming@freescale.com>
12724 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
12725 Author: Matthew McClintock <msm@freescale.com>
12726 Date: Wed Jun 28 10:45:41 2006 -0500
12728 * Fixed PCI memory definitions
12729 Patch by Andy Fleming 17-Mar-2006
12731 Signed-off-by: Andy Fleming <afleming@freescale.com>
12733 commit 087454609e47295443af793a282cddcd91a5f49c
12734 Author: Matthew McClintock <msm@freescale.com>
12735 Date: Wed Jun 28 10:45:17 2006 -0500
12737 * Added support for initializing second PCI bus on 85xx
12738 Patch by Andy Fleming 17-Mar-2006
12740 Signed-off-by: Andy Fleming <afleming@freescale.com>
12742 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
12743 Author: Matthew McClintock <msm@freescale.com>
12744 Date: Wed Jun 28 10:44:49 2006 -0500
12746 * Added PCI-X #defines for PCI-X initialization
12747 Patch by Andy Fleming on 17-Mar-2006
12749 Signed-off-by: Andy Fleming <afleming@freescale.com>
12751 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
12752 Author: Matthew McClintock <msm@freescale.com>
12753 Date: Wed Jun 28 10:44:23 2006 -0500
12755 * Made sure the code which disables prefetch for PCI devices
12756 sets the size of the prefetch region to 0
12757 Patch by Andy Fleming on 17-Mar-2006
12759 Signed-off-by: Andy Fleming <afleming@freescale.com>
12761 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
12762 Author: Matthew McClintock <msm@freescale.com>
12763 Date: Wed Jun 28 10:43:36 2006 -0500
12765 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
12766 Patch by Jon Loeliger 17-Jan-2006
12768 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12770 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
12771 Author: Matthew McClintock <msm@freescale.com>
12772 Date: Wed Jun 28 10:43:00 2006 -0500
12774 * Removed the oftree.dts for stxxtx in light of the changes
12775 to the flat device tree handling code
12776 Patch by Matthew McClintock 26-June-2006
12778 commit 1b380ec225665e73959677f3893dc658c5925e05
12779 Author: Matthew McClintock <msm@freescale.com>
12780 Date: Wed Jun 28 10:42:24 2006 -0500
12782 * Patch to modify ft_build.c to update flat device trees in place
12783 Patch by Matthew McClintock 26-June-2006
12785 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
12786 Author: Matthew McClintock <msm@freescale.com>
12787 Date: Wed Jun 28 10:41:37 2006 -0500
12789 * Modify bootm command to support booting with flat device trees
12790 Patch by Matthew McClintock 26-June-2006
12792 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
12793 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
12794 Date: Wed Jun 28 08:43:56 2006 -0500
12796 Change Id to symbolic name for RTL8139
12798 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12800 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
12801 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
12802 Date: Tue Jun 27 18:12:10 2006 +0800
12804 Fix RTL8139 in big endian
12806 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
12807 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
12809 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
12810 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
12811 Date: Tue Jun 27 18:12:23 2006 +0800
12813 Fix Tsec bug when no link
12815 When tftp a non-exist file from the tftp server, u-boot will check
12816 the link of all eth port. The original file will return wrong link
12817 state on the no link ports.
12819 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
12821 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
12822 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
12823 Date: Tue Jun 27 18:12:02 2006 +0800
12825 Fix bug for io_bar size during pci scan
12827 During the pci scan process, Some devices return bar_reponse with the
12828 highest bytes 0, such as the pci bridge in uli1575 return bar_response
12829 with 0xffffff, So the bar_size should be manually set under 64K.
12831 Signed-off-by: Jason Jin <jason.jin@freescale.com>
12833 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
12834 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
12835 Date: Tue Jun 27 18:11:54 2006 +0800
12837 Enable PCIE1 for MPC8641HPCN board
12839 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12841 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
12842 Author: Wolfgang Denk <wd@pollux.denx.de>
12843 Date: Mon Jun 26 11:06:00 2006 +0200
12847 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
12848 Author: Jon Loeliger <jdl@freescale.com>
12849 Date: Thu Jun 22 08:51:46 2006 -0500
12851 Fix bug in 8641hpcn reset command with no args.
12853 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
12854 Acked-by: Jon Loeliger <jdl@freescale.com>
12856 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
12857 Author: Zhang Wei <wei.zhang@freescale.com>
12858 Date: Tue Jun 20 17:47:15 2006 +0800
12860 Reworked IRQ mapping in OF-tree.
12862 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
12863 Author: Jon Loeliger <jdl@freescale.com>
12864 Date: Thu Jun 15 21:33:37 2006 -0500
12866 Do not enable address translation on secondary CPUs.
12867 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
12869 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12871 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
12872 Author: Wolfgang Denk <wd@pollux.denx.de>
12873 Date: Wed Jun 14 18:14:56 2006 +0200
12877 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
12878 Author: Wolfgang Denk <wd@pollux.denx.de>
12879 Date: Wed Jun 14 17:45:53 2006 +0200
12881 Various USB related patches
12882 - Add support for mpc8xx USB device.
12883 - Add support for Common Device Class - Abstract Control Model USB console.
12884 - Add support for flow control in USB slave devices.
12885 - Add support for switching between gserial and cdc_acm using environment.
12886 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
12887 - Update usbcore slightly to ease host enumeration.
12888 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
12889 - Add AdderUSB_config as a defconfig to enable usage of the USB console
12890 by default with the Adder87x U-Boot port.
12891 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
12893 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
12894 Author: Jon Loeliger <jdl@jdl.com>
12895 Date: Wed Jun 7 10:53:55 2006 -0500
12897 Fix a get_board_sys_clk() use-before-def warning.
12899 Signed-off-by: Jon Loeliger <jdl@jdl.com>
12901 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
12902 Author: Jon Loeliger <jdl@jdl.com>
12903 Date: Wed Jun 7 10:52:49 2006 -0500
12905 Allow DTC path to be passed in.
12907 Signed-off-by: Jon Loeliger <jdl@jdl.com>
12909 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
12910 Author: Haiying Wang <haiying.wang@freescale.com>
12911 Date: Tue Jun 6 16:54:29 2006 -0400
12913 Modify the IRQ of DUART2
12915 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
12916 Author: Jon Loeliger <jdl@jdl.com>
12917 Date: Wed May 31 13:55:35 2006 -0500
12921 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12923 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
12924 Author: Jon Loeliger <jdl@jdl.com>
12925 Date: Wed May 31 12:44:44 2006 -0500
12927 White space cleanup.
12928 Some 80-column cleanups.
12929 Convert printf() to puts() where possible.
12930 Use #include "spd_sdram.h" as needed.
12931 Enhanced reset command usage message a bit.
12933 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12935 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
12936 Author: Jon Loeliger <jdl@jdl.com>
12937 Date: Wed May 31 11:39:34 2006 -0500
12939 Removed unneeded local_bus_init() from 8641HPCN board.
12941 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12943 commit 4d3d729c16c392d2982d3266b659d333c927697d
12944 Author: Jon Loeliger <jdl@jdl.com>
12945 Date: Wed May 31 11:24:28 2006 -0500
12947 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
12949 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12951 commit b2a941de060350ad15878d8219825f4950e9bb8e
12952 Author: Jon Loeliger <jdl@jdl.com>
12953 Date: Wed May 31 10:07:28 2006 -0500
12955 Remove dead debug code.
12957 Signed-off-by: Jon Loeliger <jdl@jdl.com>
12959 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
12960 Author: Jon Loeliger <jdl@freescale.com>
12961 Date: Tue May 30 17:47:00 2006 -0500
12963 Move mpc86xx PIXIS code to board directory
12965 First cut at moving the PIXIS platform code out of
12966 the 86xx cpu directory and into board/mpc8641hpcn
12969 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12971 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
12972 Author: Markus Klotzbuecher <mk@denx.de>
12973 Date: Tue May 30 16:56:14 2006 +0200
12975 Support generic OHCI support for the s3c24x0 cpu.
12977 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
12978 Author: Haiying Wang <Haiying.Wang@freescale.com>
12979 Date: Tue May 30 09:10:32 2006 -0500
12981 Improve "reset" command's interaction with watchdog.
12983 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
12984 "reset altbank wd" will reset another bank WITH watch dog enabled
12985 "diswd" will disable watch dog after u-boot boots up successfully
12987 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
12989 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
12990 Author: Haiying Wang <Haiying.Wang@freescale.com>
12991 Date: Tue May 30 08:51:19 2006 -0500
12993 Fix two SDRAM setup bugs.
12996 Enable 1T/2T based on number of DIMMs present.
12998 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13000 commit d11fec5015334deb2010e36ce00bb118cc5429a5
13001 Author: Haiying Wang <Haiying.Wang@freescale.com>
13002 Date: Fri May 26 10:24:48 2006 -0500
13004 Add first draft of the MPC8641HPCN doc/README.
13006 Signed-off-by: Jon Loeliger <jdl@jdl.com>
13008 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
13009 Author: Haiying Wang <Haiying.Wang@freescale.com>
13010 Date: Fri May 26 10:13:04 2006 -0500
13012 Added pci@8000 block.
13013 Updated ethernet interrupt mappings (moved up 48).
13014 Cleaned up a few comments.
13016 Signed-off-by: Jon Loeliger <jdl@jdl.com>
13018 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
13019 Author: Haiying Wang <Haiying.Wang@freescale.com>
13020 Date: Fri May 26 10:01:16 2006 -0500
13022 Allow args on reset command.
13024 Signed-off-by: Jon Loeliger <jdl@jdl.com>
13026 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
13027 Author: Markus Klotzbuecher <mk@denx.de>
13028 Date: Tue May 23 13:38:35 2006 +0200
13030 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
13031 fixes to the latter.
13033 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
13034 Author: Markus Klotzbuecher <mk@denx.de>
13035 Date: Tue May 23 10:33:11 2006 +0200
13037 More cleanup for the delta board and the generic usb_ohci driver. Added
13038 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
13039 initialization and cleanup hooks respectively.
13041 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
13042 Author: Markus Klotzbuecher <mk@denx.de>
13043 Date: Mon May 22 16:33:54 2006 +0200
13045 This patch adds USB storage support for the delta board. This is the first
13046 board to make use of a generic OHCI driver, that calls hooks for board
13047 dependant initialization.
13049 commit 14e37081ff3cac7ebe6e93836523429853b6b292
13050 Author: Jon Loeliger <jdl@jdl.com>
13051 Date: Fri May 19 13:28:39 2006 -0500
13053 Change arbitration to round-robin for SMP linux.
13055 commit 9a655876e5995be80f49054e2509500e871e4d3a
13056 Author: Jon Loeliger <jdl@jdl.com>
13057 Date: Fri May 19 13:26:34 2006 -0500
13059 Enable dual DDR controllers and interleaving.
13061 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
13062 Author: Jon Loeliger <jdl@jdl.com>
13063 Date: Fri May 19 13:22:44 2006 -0500
13065 Update 86xx address map and LAWBARs.
13067 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
13068 Author: Jon Loeliger <jdl@jdl.com>
13069 Date: Fri May 19 13:14:15 2006 -0500
13071 Remove L2 Cache invalidate polling.
13073 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
13074 Author: Jon Loeliger <jdl@jdl.com>
13075 Date: Fri May 19 12:33:09 2006 -0500
13077 Enable 2nd CPU and I2C.
13079 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
13080 Author: Jon Loeliger <jdl@freescale.com>
13081 Date: Mon May 15 07:26:56 2006 -0500
13083 Update interrupt mapping.
13085 commit 6cfea33477b04b63ed47386ed1629529484c33ba
13086 Author: Haiying Wang <Haiying.Wang@freescale.com>
13087 Date: Wed May 10 09:38:06 2006 -0500
13089 Remove unneeded INIT_RAM_LOCK cache twiddling.
13090 Correctly tracks r29 as global data pointer now.
13092 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13094 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
13095 Author: Jon Loeliger <jdl@freescale.com>
13096 Date: Wed May 10 09:33:07 2006 -0500
13098 Remove unnecessary flash.c file.
13100 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
13101 Author: Jon Loeliger <jdl@freescale.com>
13102 Date: Tue May 9 08:23:49 2006 -0500
13104 Get MPC8641HPCN flash images working.
13106 Enable the CFI driver.
13107 Remove bogus LAWBAR7 cruft.
13108 Use correct TEXT_BASE, Fixup load script.
13109 Enable SPD EEPROM during DDR setup.
13110 Use generic RFC 1918 IP addresses by default.
13112 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
13113 Author: Jon Loeliger <jdl@freescale.com>
13114 Date: Thu Apr 27 10:15:16 2006 -0500
13116 Cleanup whitespaces and style issues.
13117 Removed //-style comments.
13118 Use 80-column lines.
13119 Remove trailing whitespace.
13120 Remove dead code and debug cruft.
13122 commit a2320a6bf8113a09544c42d160d10ac69d049a03
13123 Author: Jon Loeliger <jdl@freescale.com>
13124 Date: Thu Apr 27 08:22:39 2006 -0500
13126 Revert bad PCI prefetch limit change.
13128 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
13129 Author: Jon Loeliger <jdl@freescale.com>
13130 Date: Wed Apr 26 17:58:56 2006 -0500
13132 Initial support for MPC8641 HPCN board.