1 ======================================================================
2 Changes for U-Boot 1.1.4:
3 ======================================================================
5 * Additional fix for external IRQ config on Yellowstone & Yosemite
6 Patch by Stefan Roese, 03 Nov 2005
8 * Add support for Ocotea pass 3 with 440GX Rev. F
9 Patch by Stefan Roese, 01 Nov 2005
11 * Fix external IRQ configuration on Yellowstone & Yosemite
12 Patch by Stefan Roese, 28 Oct 2005
14 * Add support for multiple PHYs.
15 Tested on the following boards:
16 cmcpu2 (at91rm9200/ether.c)
17 PPChameleon (ppc4xx/4xx_enet.c)
20 tqm834x (mpc834x/tsec.c) with EEPRO100
21 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
24 - miiphy_register routine was added to allow multiple PHYs to be registered
25 - miiphy_read and miiphy_write are now defined in this file, and
26 require additional argument (char *devname)
27 - other miiphy_* routines also require additional device name argument
30 Calling reset_phy() was moved to be executed *after* eth_initialize().
31 This is necessary as now some of the implementations of reset_phy()
32 may need to use miiphy_reset() which is not allowed before eth_initialize()
33 as eth_initialize registers all required miiphy_* routines.
34 Tested on IP860 and PHY initializes properly after this change.
36 * Correct includes for flat tree builder.
38 * Fix conflicting types (flash_write()) in trab auto_update.c.
40 * Add PCI support for the TQM834x board.
42 * Add missing 4xx board to MAKEALL
43 Patch by Stefan Roese, 20 Oct 2005
45 * Fix conflicting types (flash_write()) in esd auto_update.c
46 Patch by Stefan Roese, 20 Oct 2005
48 * Fix problem with sleep in NetConsole (use get_timer())
49 Patch by Stefan Roese, 20 Oct 2005
51 * Add NetConsole Support for AMCC eval boards
52 Patch by Stefan Roese, 20 Oct 2005
54 * Fix NetConsole support on 4xx (only print eth link on 1st transfer)
55 Patch by Stefan Roese, 18 Oct 2005
57 * Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
58 Fix identation on ext2ls help entry.
59 Patch by Stefan Roese, 14 Oct 2005
61 * Add support for TQM834x boards.
66 * Add documentation for Open Firmware Flat Tree and usage.
67 Patch by Pantelis Antoniou, 13 Oct 2005
69 * Add missing files for Pantelis Antoniou's patch
70 Patch by Pantelis Antoniou, 04 Sep 2005
72 * Fix problem in ppc4xx eth-driver without ethaddr (only without
74 Patch by Stefan Roese, 10 Oct 2005
76 * Fix gzip bmp support (test if malloc fails, warning when truncated).
77 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
78 Patch by Stefan Roese, 07 Oct 2005
80 * Add support for OF flat tree for the STXtc board.
81 Patch by Pantelis Antoniou, 04 Sep 2005
83 * Support passing of OF flat trees to the kernel.
84 Patch by Pantelis Antoniou, 04 Sep 2005
88 * Add support for NetSilicon NS7520 processor.
89 Patch by Art Shipkowski, 12 May 2005
91 * Add support for AP1000 board.
92 Patch by James MacAulay, 07 Oct 2005
94 * Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
95 Patch by Anders Larsen, 07 Oct 2005
97 The Atmel errata #11 states that the transfer buffer descriptor
98 table must be aligned on a 16-word boundary. As it turned out, this
99 is insufficient - it seems the table must be aligned on a boundary
100 at least as large as the table itself (in Linux this is not an
101 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
103 * Fixed compilation for ARM when using a (standard) hard-FP toolchain
104 Patch by Anders Larsen, 07 Oct 2005
106 * Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
107 sed the linker scripts, rather than pre-process them.
108 Patch by Peter Pearse, 07 Oct 2005
110 * Update make target for ARM supported boards.
111 Use lowlevel_init() instead of platformsetup() [rename].
112 Patch by Peter Pearse, 06 Oct 2005
114 * Fix booting from serial dataflash on AT91RM9200
115 Patch by Peter Menzebach, 29 Aug 2005
117 * Add JFFS2 support for TRAB board
118 Patch by Martin Krause, 25 Aug 2005
120 * Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
121 Patch by Marcus Hall, 24 Aug 2005
123 * Fix the machine-id of the Cogent csb637 board
124 Patch by Anders Larsen, 05 Oct 2005
126 * Complete support for the KwikByte KB920x boards
127 Patch by Anders Larsen, 05 Oct 2005
129 * Set the AT91RM9200 clock to asynchronous mode
130 Patch by Anders Larsen, 03 May 2005
132 * Set the AT91RM9200 clock to synchronous mode
133 Patch by Anders Larsen, 29 Apr 2005
135 * Add support for Cogent csb637
136 Patch by Anders Larsen, 29 Apr 2005
138 * Fix dm9161.c initialization
139 Patch by Anders Larsen, 29 Apr 2005
141 * Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
142 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
144 * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
145 Patch by Anders Larsen, 29 Apr 2005
147 * Fix device partition intialization for SystemACE disks.
148 Patch by Stephen Williams, 28 Apr 2005
150 * Added support for KwikByte KB920x boards (based on AT91RM9200)
151 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
153 * Add support for S29GL064M-R3 flash chip on xsengine board
154 Patch by Kurt Stremerch, 18 Apr 2005
156 * E500 update: repoint IVPR to RAM when code is relocated
157 Patch by Kylo Ginsberg, 13 Apr 2005
159 * Fix loop end test in lib_generic/string.c:strswab()
160 Patch by Andrew Dyer, October 10, 2005
161 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
165 * Update ARM Integrator boards:
166 Correct addessing errors in platform files.
167 Split off common core module data from Integrator header files to
168 include/armcoremodule.h.
169 Patch by Peter Pearse, 04 Oct 2005
171 * Make sure only supported compiler options are used
172 Import "cc-option" shell function from kernel and
173 use it to get the correct ARM GCC options for individual CPUs
174 Patch by Peter Pearse, 30 Jun 2005
176 * Fix 440GR to print correct cpu revision
177 Patch by Stefan Roese, 04 Oct 2005
179 * Change board message on AMCC Yosemite & Yellowstone to common style
180 Patch by Stefan Roese, 03 Oct 2005
182 * Fix compiler warning
184 * Fix FEC PHY addresses for TQM85xx boards
186 * Fix uninitialized variable problem in hush shell
187 Patch by Lars Rostock, 26 Sep 2005
189 * Undo change of f6e20fc6ca... to include/configs/trab.h
190 (Must have been an accident?)
192 * Add support for AT91RM9200 OHCI Controller.
193 Patch by Eric Benard, 07 Apr 2005
195 * Update ARM mach-types.h
196 Patch by Eric Benard, 07 Apr 2005
198 * Add support for MP2USB board.
199 Patch by Eric Benard, 07 Apr 2005
201 * Add board support for armadillo HT1070
202 Patch by Rowel Atienza, 06 Apr 2005
204 * Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
205 Patch by Vitaly Bordug, 30 Mar 2005
207 * Add iopset command on mpc8xx
208 Patch by Daniel Eisenhut, 25 Mar 2005
210 * Add support for MII in eepro100 driver.
211 Patch by Gleb Natapov, 21 Mar 2005
213 * Fixes to the Lubbock (PXA 25x) support:
214 - Resolve the FIXME with respect to saving the u-boot environment.
215 - Make the default load address land in real memory.
216 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
217 Patch by David Brownell, 10 Mar 2005
219 * Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
220 Patch by Marc Leeman, 04 Mar 2005
222 * OMAP242x H4 board update
223 - fix for ES2 differences.
224 - switch to using the cfi_flash driver.
225 - fix SRAM build address.
226 - fix for GP device operation.
227 - unlock SRAM for GP devices.
228 - display more device information.
229 - fix potential deadlock in omap24xx_i2c driver.
230 - fix DLL load values to match dpllout*1 operation.
231 - fix 2nd chip select init for combo DDR device.
232 - add support for CFI Intel 28F256L18 on H4 board.
233 Patch by Richard Woodruff, 03 Mar 2005
235 * Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
236 Patch by Steven Scholz, 02 Mar 2005
239 Patch by Ara Avanesyan, 24 Feb 2005
241 * Remove unneeded #include <malloc.h>
242 Patch by Ladislav Michl, 22 Feb 2005
244 * Add cramfs support for m68k
245 Patch by Zachary Landau, 21 Feb 2005
247 * Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
248 Patch by Jeff Angielski, 21 Feb 2005
250 * Fix au1x00_serial baud rate calculation:
251 remove hardcoded cpu clock divisor and use register instead;
252 round up instead of truncate
253 Patch by Andrew Dyer, 15 Feb 2005
255 * Add Xilinx Spartan3 family FPGA support
256 Patch by Kurt Stremerch, 14 Feb 2005
258 * Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
259 Patch by Zachary Landau, 11 Feb 2005
262 Patch by Matthias Fuchs, 25 Sep 2005
264 * Added support for PCI bridge on MPC8272ADS
265 Patch by Vitaly Bordug, Feb 09 2005
267 * Update multicore CM9XX support for Integrator AP to allow booting from flash
268 Patch by Jean-Paul Saman, 8 Feb 2005
270 * Fix strswab() to reliably find end of string
271 Patch by Andrew Dyer, 08 Feb 2005
273 * Fix typos in include/ppc440.h
274 Patch by Andrew E Mileski, 04 Feb 2005
276 * Add Vibren (was Accelent) PXA255 IDP Support
277 Patch by Cliff Brake, 04 Feb 2005
279 * Fix tools/bmp_logo.c using incorrect offset to pixel data
280 Patch by Andrew Dyer, 31 Jan 2005
282 * Add ARM946E cpu and core module targets; remap memory to 0x00000000
283 Patch by Peter Pearse, 2 Feb 2005
285 * Fix error handling in tools/env/fw_env.c
286 Patch by Ara Avanesyan, 01 Feb 2005
288 * Fix MGT5100 PSC baudrate calculation
289 Patch by Sebastian Schau, 27 Jan 2005
291 * OMAP242x fix for GP device booting
292 - Add SRAM unlock for GP devices.
293 - Change DDR DLL unlock value to allow DPLLout*1 operation.
294 Patches by Richard Woodruff, 21 Jan 2005:
296 * Add support for AMD's Pb1x00 eval board;
297 add MII routines to the au1x00 ethernet driver;
298 add USB ohci driver (work in progress)
299 Patch by Thomas Sailer, 20 Jan 2005
301 * Update omap5912osk board
302 Use drivers/cfi_flash.c instead of private flash driver;
303 Remove hardcoded personalized settings from omap5912osk.h;
304 Fix spacing with (RO) marks in 'flinfo' output.
305 Patch by Michael Bendzick, 14 Jan 2005
307 * Fix warnings for PCI code on ixp
308 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
310 * virtex2 fix for bogus download error messages
311 The virtex2 FPGA download code watches for init going active during
312 a download of config data as an error condition. init also goes
313 active after a configuration is finished in concert with the done
314 signal. So far, the code does not check for done active until all
315 of the configuration data is sent. If configuration data has a few
316 extra pad bytes at the end, this would cause an error message even
317 though the download had suceeded.
318 NOTE: virtex2 slave serial and spartan2 versions may still have the
320 Patch by Andrew Dyer, 12 Jan 2005
322 * Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
323 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
324 message when probing for nonexistent flash in little endian mode.
325 As a side effect more efficient and smaller code is generated,
326 which is always a Good Thing (TM).
327 Patch by Ladislav Michl, 24 Sep 2005
329 * Update for TFTP using a fixed UDP port
330 Use the approved environment variable names. Added "tftpdstp" to
331 allow ports other than 69 per Tolunay Orkun's recommendation.
332 Patch by Jerry Van Baren, 12 Jan 2005
334 * Allow to force TFTP to use a fixed UDP port
335 (Add a configuration option CONFIG_TFTP_PORT and optional env
337 Patch by Jerry Van Baren, 10 Jan 2005
339 * Fix ethernet timeouts on dbau1550 and other au1x00 systems
340 Patch by Leif Lindholm, 29 Dec 2004
342 * Cleanup: fix broken builds
344 * Fix PHY address argument passing with mii info command
345 Patch by Andrew Dyer, 28 Dec 2004
347 * Cleanup (PPC4xx is AMCC now)
349 * esd CPCI2DP board added
350 Patch by Matthias Fuchs, 22 Sep 2005
352 * esd PMC405 board updated
353 Patch by Matthias Fuchs, 22 Sep 2005
355 * Add SM501 support to HH405 board.
356 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
357 Add support for eeprom write-enable (CFG_EEPROM_WREN).
358 Patch by Stefan Roese, 22 Sep 2005
360 * Fix autonegotiation in tsec ethernet driver
361 Patch by Stefan Roese, 21 Sep 2005
363 * Fix bug in auto_update (trab board)
364 Patch by Martin Krause, 16 Sep 2005
366 * Fix computation of framebuffer palette for 8bpp LCD bitmaps
367 Patch by Francesco Mandracci, 16 Sep 2005
369 * Update configuration for INKA4x0 board
371 * Update configuration for PM854 board
372 Based on patch by R. Loeffl, 20 Jul 2005
374 * Add PCI support to TQM8540 and TQM8560 boards
375 Patch by Stefan Roese, 15 Sep 2005
377 * Update AMCC Yosemite to get a consistent setup for all AMCC eval
378 boards (baudrate, environment...). Flash driver fixed.
379 Patch by Stefan Roese, 15 Sep 2005
381 * Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
382 ethernet port on ebony.
383 Patch by Stefan Roese, 7 Sep 2005
385 * Added support for mtddevnum and mtddevname variables (mtdparts command)
387 * Change default console baud rate for stxxtc board
389 * Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
390 Patch by Stefan Roese, 31 Aug 2005
392 * Fix default command set (don't include CFG_CMD_DISPLAY command)
393 Patch by Pantelis Antoniou, 02 Sep 2005
397 * Enable SM712 driver support for HMI1001 board.
399 * Fix problems with ld version 2.16 (dot outside sections problem)
400 Pointed out by Gerhard Jaeger, 31 Aug 2005;
401 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
403 * Prepare U-Boot for gcc-4.x: fix global data pointer initialization
405 * Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
407 * Add keyboard and dot matrix display support for HMI1001 board.
409 * Prepare U-Boot for gcc-4.x
411 * Fixed Bamboo port to enable running without DDR-DIMM
412 (Bamboo has also 64MB onboard DDR)
413 Patch by Stefan Roese, 24 Aug 2005
415 * Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
416 now handling all 4xx cpu's
417 Patch by Stefan Roese, 16 Aug 2005
419 * Fix make dependencies for at91rm9200 and ks8695 cpus
420 Patch by Steven Scholz, 23 Aug 2005
422 * Add JFFS2 support for TQM5200 board
424 * Add esd cpci5200 and pf5200 boards
425 Patch by Reinhard Arlt, 22 Aug 2005
427 * Fix sysclock for TQM8540 and TQM8560 boards
428 Patch by Martin Krause, 25 Jul 2005
430 * Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
431 Patch by Martin Krause, 08 Jun 2005
433 * Add new board specific commands for TQM5200/STK52XX
434 - Sound commands (beep, wav, sound)
435 - Test commands (led, can, backlight, rs232)
436 Patch by Martin Krause, 02 May 2005
438 * Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
439 because of a bug in the AT91RM9200 CPU PLL
440 Patch by Martin Krause, 22 Apr 2005
442 * Add automatic HW detection for another CMC_PU2 variant
443 Patch by Martin Krause, 20 Apr 2005
445 * Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
446 Patch by Martin Krause, 19 Apr 2005
448 * Fix initialization problem on TQM5200 without SM501
449 Patch by Martin Krause, 08 Apr 2005
451 * Add RTC support for STK52XX.200
452 Patch by Martin Krause, 07 Apr 2005
454 * Add support for IFM o2dnt board
456 * Enable PCI on hmi1001 board
458 * Fix return values of the jffs2 commands ls/fsload/fsinfo,
459 so we can use them to, e.g., check the existence of a file with
460 "if ls foo; then this; else that; fi" in the hush shell
461 Patch by Andreas Engel, 16 August 2005
463 * Coding style cleanup
465 * Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
466 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
468 * Check return value of malloc in 440gx_enet.c
469 Patch by Travis B. Sawyer, 18 Jul 2005
471 * Add Sandburst Metrobox and Sandburst Karef board support packages.
472 Second serial port on 440GX now defined as a system device.
473 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
474 Patch by Travis B. Sawyer, 12 Jul 2005
476 ======================================================================
477 Changes for U-Boot 1.1.3:
478 ======================================================================
482 * Add forgotten new fils from latest VoiceBlue update
484 * Make bootretry feature work with hush shell.
485 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
486 Patch by Andreas Engel, 19 Jul 2005
488 * Update Hymod Board Database PHP code in "tools" directory
489 Patch by Murray Jensen, 01 Jul 2005
491 * Make "tr" command use POSIX compliant; export HOSTOS make variable
492 Patch by Murray Jensen, 30 Jun 2005
494 * Fix Murray Jensen's mail address.
495 Patch by Murray Jensen, 30 Jun 2005
497 * Preserve PHY_BMCR during a soft reset.
498 Patch by Carl Riechers, 24 Jun 2005
500 * VoiceBlue update: eeprom tool can also store firmware version now.
501 eeprom.bin is runable by jumping at load address.
502 Patch by Ladislav Michl, 23 May 2005
504 * Move the AT91RM9200DK to the ARM Systems list.
505 Patch by Anders Larsen, 26 Apr 2005
507 * Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
508 Patch by Anders Larsen, 26 Apr 2005
510 * measure_gclk() is needed when DEBUG is enabled
511 Patch by Bryan O'Donoghue, 25 Apr 2005
513 * Add UPD-Checksum code, fix problem in net.c (return instead of break)
514 Patch by Reinhard Arlt, 12 Aug 2005
516 * esd PCI405 board updated
517 Patch by Matthias Fuchs, 28 Jul 2005
519 * esd WUH405 and DU405 board updated
520 Patch by Matthias Fuchs, 27 Jul 2005
522 * Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
523 Patch by Matthias Fuchs, 4 May 2005
525 * Update AMCC Yosemite to get a consistent setup for all AMCC eval
526 boards (baudrate, environment...). Flash driver fixed.
527 Patch by Stefan Roese, 11 Aug 2005
529 * Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
530 Patch by Stefan Roese, 11 Aug 2005
532 * Add NAND FLASH support for AMCC Bamboo 440EP eval board
533 Patch by Stefan Roese, 11 Aug 2005
535 * Add configuration for IFM AEV FIFO board.
536 Minor coding style cleanup.
538 * Add configuration for IFM SPI eval board
540 * Fix CompactFlash problem on HMI1001 board
542 * Make new "mtdparts" code build with older compilers
543 Patch by Andrea Scian, 09 Aug 2005
545 * Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
546 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
547 with the 405 defines and the linux kernel defines.
548 Patch by Stefan Roese, 08 Aug 2005
550 * Fix compiler warnings with older GCC versions
552 * Add common (with Linux) MTD partition scheme and "mtdparts" command
554 Old, obsolete and duplicated code was cleaned up and replace by the
555 new partitioning method. There are two possible approaches now:
557 The first one is to define a single, static partition:
559 #undef CONFIG_JFFS2_CMDLINE
560 #define CONFIG_JFFS2_DEV "nor0"
561 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
562 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
563 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
565 The second method uses the mtdparts command line option and dynamic
568 /* mtdparts command line support */
569 #define CONFIG_JFFS2_CMDLINE
570 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
571 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
573 Command line of course produces bigger images, and may be inappropriate
574 for some targets, so by default it's off.
576 * Fix build problems for PM856 Board
578 * Fix sign extension bug in 'fpga loadb' command;
579 make 'fpga loadb' always print the file header info
580 Patch by Andrew Dyer, 11 Jan 2005
582 * Fix errors that occur when accessing SystemACE CF
583 Patch by Jeff Angielski, 09 Jan 2005
585 * Document switching between U-Boot and PlanetCore on RPXlite
586 by Sam Song, 24 Dec 2004
588 * Fix PowerQUICC II mask detection.
589 Patch by Eugene Surovegin, 20 Dec 2004
591 * Add support for Altera NIOS DK1C20 board
592 Patch by Shlomo Kut, 13 Dec 2004
594 * Add support for ep8248 board
595 Patch by Yuli Barcohen, 12 Dec 2004
599 * Fix baudrate setting for KGDB on MPC8260
600 Patch by HoJin, 11 Dec 2004
602 * Fix 'mii help' text formatting
603 Patch by Cory Tusar, 10 Dec 2004
605 * Fix return code of NFS command
606 Patch by Hiroshi Ito, 11 Dec 2004
610 * Fix compiler warnings in cpu/ppc4xx/usbdev.c
611 Patch by Steven Blakeslee, 04 Aug 2005
613 * Add support for AMCC Bamboo PPC440EP eval board
614 Patch by Stefan Roese, 04 Aug 2005
616 * Patch by Jon Loeliger
617 Fix style issues primarily in 85xx and 83xx boards.
619 - Trailing white space
620 - Indentation not by TAB
621 - Excessive amount of empty lines
622 - Trailing empty lines
624 * Patch by Ron Alder, 11 Jul 2005
625 Add Xianghua Xiao and Lunsheng Wang's support for the
626 GDA MPC8540 EVAL board.
628 * Patch by Eran Liberty
629 Add support for the Freescale MPC8349ADS board.
631 * Patch by Jon Loeliger, 25 Jul 2005
632 Move the TSEC driver out of cpu/mpc85xx as it will be shared
633 by the upcoming mpc83xx family as well.
635 * Patch by Jon Loeliger, 05 May 2005
636 Implemented support for MPC8548CDS board.
637 Added DDR II support based on SPD values for MPC85xx boards.
638 This roll-up patch also includes bugfies for the previously
640 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
642 * Patch by Jon Loeliger, 10 Feb 2005
643 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
645 * Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
647 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
648 for faster flash parts.
649 Add documentation for BR/OR for FLASH.
651 * Patch by Jon Loeliger 08 Feb 2005
652 Determine L2 Cache size dynamically on 85XX boards.
654 * Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
655 - Convert the CPM2 based functionality to use new CONFIG_CPM2
656 option rather than a myriad of CONFIG_MPC8560-like variants.
657 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
658 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
659 new CONFIG_CPM2 option to each 8260 board.
661 * Add support for MicroSys PM856 board
662 Patch by Josef Wagner, 03 Aug 2005
664 * Minor fixes to PM854 board
665 Patch by Josef Wagner, 03 Aug 2005
667 * Adjust configuration of XENIAX board
668 (chip select and GPIO required for USB operation)
670 * Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
671 routed to the Watchdog handler
672 Patch by Eugene Surovegin, 18 Jun 2005
674 * (re)enabled scsi commands do_scsi() and do_scsiboot()
675 Patch by Denis Peter, 06 Dec 2004
677 * Fix endianess problem in TFTP / NFS default filenames
678 Patch by Hiroshi Ito, 06 Dec 2004
680 * Ignore broadcast status bit in received frames in 8260 FCC ethernet
682 Patch by Murray Jensen, 18 Jul 2005
684 * Fix typo in mkconfig script (used == instead of =)
685 Patch by Murray Jensen, 18 Jul 2005
687 * Cleanup build problems on 64 bit build hosts
689 * Update MAINTAINERS file
691 * Patch by Stefan Roese, 01 Aug 2005:
692 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
693 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
695 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
696 to run on both 405GP and 405GPr eval boards).
698 * Patch by Steven Blakeslee, 27 Jul 2005:
699 - Add support for AMCC PPC440EP/GR.
700 - Add support for AMCC Yosemite PPC440EP eval board.
701 - Add support for AMCC Yellowstone PPC440GR eval board.
703 * Minor fixes for PPChameleon Board:
704 - fix alignment of NAND size
705 - make code do what the comment says
707 * Implement h/w sector protection status synchronization at boot.
708 The code is provided for, and was tested on, the Yukon/Alaska
709 and PM520 boards only.
711 A bug in flash_real_protect() for the Yukon board was fixed by
712 adding a function that tells if two banks are on one flash chip.
714 * Fix sysmon POST problem: check I2C error codes
715 This fixes a problem of displaying bogus voltages when the voltages
716 are so low that the I2C devices start failing while the rest of the
717 system keeps running.
719 * Patch by Cedric Vincent, 6 Jul 2005:
720 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
722 * Patch by Jon Loeliger, 20 Jul 2005:
723 Add missing PCI IO port definitions.
725 * Add CompactFlash support for HMI1001 board.
727 * Adjust printed board ID for LWMON board.
729 * Fix low-level OHCI transfers for ARM920t and MPC5xxx
731 * Add new argument format for flash commands to allow for usage like
732 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
733 U-Boot will automaticially find the end of the corresponding sector.
735 * Patch by Stefan Roese, 5 Jul 2005:
736 Update uc100 board PHY setup
738 * Patch by Stefan Roese, 1 Jul 2005:
739 Fix PHY address for CATcenter board (now correct!)
741 * Patch by Stefan Roese, 30 Jun 2005:
742 Fix PHY addresses for PPChameleon and CATcenter boards
743 Change MAINTAINER for most esd boards
745 * Patch by Detlev Zundel, 30 Jun 2005:
746 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
748 * Fix baudrate calculation problem on MPC5200 systems
750 * Add EEPROM and RTC support for HMI1001 board
752 * Patch by Detlev Zundel, 20 Jun 2005:
753 Fix initialization of low active GPIO pins on inka4x0 board
755 * Enable redundant environment, disable HW flash protection of
758 * Patch by Travis Sawyer, 10 Jun 2005:
759 Initialize allocated dev and private hw structures
760 after their respective allocation in 440gx_enet.c
762 * Patch by Steven Scholz, 10 Jun 2005:
763 Fix byteorder problems with second argument of "bootm" with
766 * Add support for HMI1001 board
768 * Disable "date" and "sntp" commands on TQM866M
770 * Fix watchdog reset problems on LWMON board
772 * Patch by Juergen Selent, 17 May 2005:
773 Add support for Funkwerk VoVPN gateway module.
775 * Cleanup debug code for MPC8220 FEC driver
777 * Extend burst mode RAM test program to take a loop count
780 * Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
781 those boards that use it.
783 * Patches by Greg Ungerer, 19 May 2005:
784 - add support for the KS8695P (ARM 922 based) CPU
785 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
787 * Patch by Steven Scholz, 19 May 2005:
788 Add support for CONFIG_SERIAL_TAG on ARM boards
790 * Add PCI support for Sorcery board.
791 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
793 * Fix compile problems caused by new burst mode SDRAM test;
794 make port pins to trigger logic analyzer configurable
796 * Fix timer handling on MPC85xx systems
798 * Fix debug code in omap5912osk flash driver
800 * Add support for MPC8247 based "IDS8247" board.
802 * Add support for 2 x TSEC interfaces on the TQM8540 board.
804 * On LWMON we must use the watchdog to reset the board as the CPU
805 genereated HRESET pulse is too short to reset the external
808 * Add test tool to exercise SDRAM accesses in burst mode
809 (as standalone program, MPC8xx/PowerPC only)
811 * Increase CFG_MONITOR_LEN for Rattler board to match actual code
814 * Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
815 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
816 added to support LZO and LZARI compression modes (undefined by
819 * Fix problem with symbolic links in JFFS2 code.
821 * Use linker ASSERT statement to prevent undetected overlapping of
822 sections on PPChameleon board; other boards might use this, too.
824 * Patch by Stefan Roese, 03 May 2005:
826 Fix problems in cmd_universe.c
828 * Patch by Matthias Fuchs, 03 May 2005:
829 Added missing variable declaration in cmd_nand.c
830 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
832 * Fix INKA4x0: use CS1 as gpio_wkup_6 output
834 * Fix bug in the SDRAM initialization code for canmb, IceCube and
836 Fix PHY address for canmb board.
838 * Cleanup serial console baudrate calculation on AT91RM9200;
839 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
841 * Patch by Matthias Fuchs, 18 Apr 2005:
842 Make PCI target address spaces on PMC405 and CPCI405 boards
843 configurable via environment variables
845 * Auto-size RAM on canmb board.
847 * Add support for canmb board
849 * Patch by Stefan Roese, 13 Apr 2005:
850 Update for esd apc405
852 * Fixes for TQM8560 board:
854 - remove debug messages
855 - fix flash sector protection
857 * Patch by Steven Scholz, 07 Apr 2005:
858 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
860 * Patches by Steven Scholz, 07 Apr 2005:
861 Fix compiler warning in altera.c
862 Fix warning in cpu/arm920t/at91rm9200/i2c.c
864 * Patch by Ladislav Michl, 06 Apr 2005:
865 Fix voiceblue configuration.
867 * Patch by Stefan Roese, 06 Apr 2005:
868 Updates for OCOTEA board:
869 - Changed U-Boot size from 512kByte to 256kByte
870 - Fixed flash driver to support boot from soldered user flash
871 - Added README for switch from PIBS firmware to U-Boot
873 * Patch by Travis Sawyer, 05 Apr 2005:
874 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
875 Problem found by Andrew Wozniak.
877 * Patch by Steven Scholz, 06 Apr 2005:
878 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
879 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
881 * Patches by Robert Whaley, 29 Nov 2004:
882 - update the pxa-regs.h file for PXA27x chips
883 - add PXA27x based ADSVIX board
884 - add support for MMC on PXA27x processors
886 * Patch by Andrew E. Mileski, 28 Nov 2004:
887 Fix PPC4xx SPD SDRAM detection bug
889 * Patch by Hiroshi Ito, 26 Nov 2004:
890 Fix logic of "test -z" and "test -n" commands
892 * Patch by Ladislav Michl, 05 Apr 2005:
893 Add support for VoiceBlue board.
895 * Patch by Ladislav Michl, 05 Apr 2005:
896 Fix netboot_common() prototypes.
898 * Patch by Steven Scholz, 05 Apr 2005:
899 Use i.MX watchdog timer for reset_cpu()
901 * Patch by Steven Scholz, 05 Apr 2005:
902 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
903 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
906 * Add support for MPC8220 based "sorcery" board.
908 * Add support for TQM8560 board.
910 * Add FEC support for TQM8540 board.
911 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
913 * Patch by Martin Krause, 04 Apr 2005:
914 Update default configuration for CMC_PU2 board.
916 * Patch by Steven Scholz, 04 Apr 2005:
917 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
918 - introduce two new configuration options instead:
919 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
921 * Patch by Steven Scholz, 04 Apr 2005:
922 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
924 * Fix timer code for ARM systems: make sure that udelay() does not
925 reset timers so it's save to use udelay() in timeout code.
927 * Patch by Mathias Küster, 23 Nov 2004:
928 add udelay support for the mcf5282 cpu
930 * Patch by Tolunay Orkun, 16 November 2004:
931 fix incorrect onboard Xilinx CPLD base address
933 * Patch by Jerry Van Baren, 08 Nov 2004:
934 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
935 the jumper for the HRCW source should select flash. If lowboot is
936 not selected, the jumper for the HRCW source should select the
938 - change default load base address to 0x00400000
940 * Patch by Yuli Barcohen, 08 Nov 2004:
941 Add support for Analogue & Micro Rattler boards.
942 Tested on Rattler8248.
944 * Patch by Andre Renaud, 08 Nov 2004:
945 Fix watchdog support in common/lcd.c
947 * Patch by Marc Leeman, 05 Nov 2003:
948 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
949 bug only affects the XPC8245 processors
951 * Patches by Josef Wagner, 29 Oct 2004:
952 - Add support for MicroSys CPU87 board
953 - Add support for MicroSys PM854 board
955 * Patch by Jian Zhang, 02 Nov 2004:
956 Add 16-bit NAND support
958 * Patch by Scott McNutt, 01 Nov 2004:
959 Add missing NIOS/NIOS2 support for "iminfo" command
961 * Patch by Detlev Zundel, 29 Oct 2004:
962 Add missing NIOS/NIOS2 support for "mkimage" tool.
964 * Patch by David Adair, 27 Oct 2004:
965 Add missing 440GX SDRAM Controller reset
967 * Patch by Steven Scholz, 25 Oct 2004:
968 Declare reset_cpu() in include/common.h instead locally
970 * Patch by Yusdi Santoso, 22 Oct 2004:
971 - Add support for HIDDEN_DRAGON board
972 - fix endianess problem in driver/rtl1839.c
974 * Patch by Allen Curtis, 21 Oct 2004:
975 support multiple serial ports
977 * Patch by Richard Klingler, 03 Apr 2005:
978 Add call to eth_halt() in net/net.c when called functions fail
979 after eth_init() has been called.
981 * Patch by Sam Song, 3 April 2005:
982 - Update README.Netconsole
985 * Prepare for SoC rework of ARM code:
986 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
987 - rename memsetup into lowlevel_init (function name and source files)
988 Patch by Steven Scholz, 03 Apr 2005:
989 - create SoC specific directories include/asm-arm/arch-imx and
990 include/asm-arm/arch-s3c24x0
992 * Fix problems with SNTP support;
993 enable SNTP support in some boards.
995 * Patches by Martin Krause, 01 Apr 2005:
996 - Fix flash erase timeout on CMC_PU2
997 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
999 * Patch by Steven Scholz, 13 March 2005:
1000 fix cache enabling for AT91RM9200
1002 * Patch by Masami Komiya, 30 Mar 2005:
1003 add SNTP support and expand time server and time offset fields of
1004 DHCP support. See doc/README.SNTP
1006 * Patch by Steven Scholz, 13 Dec 2004:
1007 Fix bug in at91rm920 ethernet driver
1009 * Patch by Steven Scholz, 13 Dec 2004:
1010 Remove duplicated code by merging memsetup.S files for
1011 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1013 * Patch by Detlev Zundel, 31 Mar 2005:
1014 Cleanup duplicate definition of overwrite_console()
1016 * Update TQM5200 configuration;
1017 prepare for Rev. 200 starter kit boards
1019 * Patch by Scott McNutt, 21 Oct 2004:
1020 Add support for Nios-II EPCS Controller core.
1022 * Patch by Scott McNutt, 20 Oct 2004:
1024 - Add sysid command (Nios-II only).
1025 - Locate default exception trampoline at proper offset.
1026 - Implement I/O routines (readb, writeb, etc)
1027 - Implement do_bootm_linux
1029 * Patches by Martin Krause, 22 Mar 2005:
1030 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1031 - add support for SM501 graphics controller
1032 - add support for graphic console on TQM5200
1033 - add support for TQM5200 Rev 200
1034 - cleanup, fix typo in include/configs/TQM5200.h
1036 * Patch by Manfred Baral, 17 Mar 2005:
1039 * Fix RTC configuration for PPChameleon board
1041 * Cleanup, fix typo in include/configs/TQM5200.h
1043 * Patch by Stefan Roese, 16 Mar 2005:
1044 Update for esd auto_update and hh405 board
1046 * Adapt for U-Boot image size (new features enabled) on TQM5200
1048 * Update code for TQM8540 board (and 85xx in general):
1049 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1050 - Reformat boot messages
1051 - Enable redundant environment
1052 - Replace the -O2 optimization flag with -mno-string
1054 * Patch by David Brownell, 10 Mar 2005:
1055 Restore copyright statements in OHCI drivers.
1057 * Add support for TQM8540 board
1059 * Patch by Detlev Zundel, 14 Mar 2005:
1060 NC650: changed NAND flash addressing to using UPMB
1062 * Patch by Stefan Roese, 14 Mar 2005:
1063 Update for esd voh405 fpga image
1065 * INKA4x0: Allow initialization of LCD backlight dimming from
1066 "brightness" environment variable.
1068 * Add port initialization for digital I/O on INKA4x0
1070 * Patch by Stefan Roese, 01 Mar 2005:
1071 Update for esd boards dp405 and hub405
1073 * Fix get_partition_info() parameter error in all other calls
1074 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1076 * Enable USB and IDE support for INKA4x0 board
1078 * Patch by Andrew Dyer, 28 Feb 2005:
1079 fix ext2load passing an incorrect pointer to get_partition_info()
1080 resulting in load failure for devices other than 0
1082 * Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1084 * Cleanup USB and partition defines
1086 * Add support for ext2 filesystems and image timestamps to TQM5200 board
1088 * Add reset code for Coral-P on INKA4x0 board
1090 * Patch by Martin Krause, 28 Jun 2004:
1091 Update for TRAB board.
1093 * Fix some missing "volatile"s in MPC5xxx FEC driver
1095 * Fix cirrus voltage detection (for CPC45)
1097 * Fix byteorder problem in usbboot and scsiboot commands.
1099 * Patch by Cajus Hahn, 04 Feb 2005:
1100 - don't insist on leading '/' for filename in ext2load
1101 - set default partition to useful value (1) in ext2load
1103 * Patch by Andrew Dyer, 08 Jan 2005:
1104 fix wrong return codes in ext2 code
1106 * Removed '--no-warn-mismatch' option from Makefile. This option
1107 makes 'ld' to overlook binary objects compatibility.
1109 * Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1110 --end-group) outside of the group. This will make 'ld' to do
1111 _multiple_ search in the library group when resolving symbol
1112 references and do only a _single_ seach in libgcc.a after the group
1115 * Fix stability problems on CPC45 board again.
1117 * Make image detection for diskboot / usbboot / scsiboot more robust
1118 (also check header checksum)
1120 * Update CPC45 board configuration.
1122 * Add USB and PCI support for INKA4x0 board
1124 * Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1128 * Patch by Robin Getz, 13 Oct 2004:
1129 Add standalone application to change SMC91C111 MAC addresses,
1130 see examples/README.smc91111_eeprom
1132 * Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1133 Fix Flash support for ARM Integrator CP.
1135 * Patch by Richard Woodruff, 10 Jan 2005:
1136 Update support for OMAP2420 (ARM11) and H4 board:
1137 o clean up and add new types to H4 memory probe code.
1138 o fix to work with internal boot.
1139 o added PRCM config III operation.
1140 o fix marginal flash timings.
1141 o add revison ATAG usage.
1142 o enable voltage scaling at power chip.
1143 o fix compile error for i2c.
1145 * Fix network problem (error when receiving multiple ARP packets)
1147 * Patch by Daniel Poirot, 12 Oct 2004:
1148 Add support for Wind River sbc405 board
1150 * Patch by Rainer Brestan, 12 Oct 2004:
1151 Make examples/Makefile more robust
1153 * Patch by Sam Song, 11 October 2004:
1154 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1155 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1158 * Patch by Sam Song, 10 Oct 2004:
1159 Fix a parameter error in run_command() in main.c
1161 * Patch by Richard Woodruff, 01 Oct 2004:
1162 add support for the TI OMAP2420 processor and its H4 reference
1165 * Patch by Christian Pellegrin, 24 Sep 2004:
1166 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1168 * Patch by Leif Lindholm, 23 Sep 2004:
1169 add support for the AMD db1550 board
1171 * Patch by Travis Sawyer, 15 Sep 2004:
1172 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1173 update README.serial_multi
1175 * Patches by David Snowdon, 07 Sep 2004:
1176 - add u-boot.hex target in the top level Makefile
1177 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1178 - use -mtune=xscale and -march=armv5 options for PXA
1180 * Patch by Florian Schlote, 08 Sep 2004:
1181 Add support for SenTec-COBRA5272-board (Coldfire).
1183 * Patch by Gleb Natapov, 07 Sep 2004:
1184 mpc824x: set PCI latency timer to a sane value
1187 * Patch by Kurt Stremerch, 03 Sep 2004:
1188 Add bitstream configuration option for fpga command (Xilinx only).
1190 * Patch by Kurt Stremerch, 03 Sep 2004:
1191 Add Xilinx Spartan2E family FPGA support
1193 * Patch by Jeff Angielski, 02 Sep 2004:
1194 Add Added support for H2 revision of the EP8260 board.
1195 Fixed formatting for some of the EP8260 related source files.
1197 * Patch by Jon Loeliger, 02 Sep 2004:
1198 Reset monitor size back to 256 so environment can be written
1199 to flash on MPC85xx ADS and CDS releases.
1201 * Patch by Paolo Broggini, 02 Sep 2004:
1202 Make BSS clearing on ARM systems more robust
1204 * Patch by Yue Hu and Joe, 01 Sep 2004:
1205 - add PCI support for ixp425;
1206 - add EEPRO100 suppor tfor ixdp425 board.
1208 * Fix problem with protected sector detection in driver/cfi_flash.c
1210 ======================================================================
1211 Changes for U-Boot 1.1.2:
1212 ======================================================================
1214 * Code cleanup, mostly for GCC-3.3.x
1216 * Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1217 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1218 additional ethernet addresses.
1220 * Cleanup drivers/i82365.c - avoid duplication of code
1222 * Fix bogus "cannot span across banks" flash error message
1226 * Add support for CompactFlash for the CPC45 Board.
1228 * Fix problems with CMC_PU2 flash driver.
1231 - avoid trigraph warning in fs/ext2/ext2fs.c
1232 - rename UC100 -> uc100
1234 * Add support for UC100 board
1236 * Patch by Stefan Roese, 16 Dez 2004:
1237 - ext2fs support added
1238 - Tundra universe support added
1239 - Coldfire MCF5249 support added (no preloader needed!)
1240 - MCF5249 board TASREG added
1241 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1243 - some esd boards updated
1244 - memory commands "mdc" and "mwc" added for cyclic read/write
1245 (CONFIG_MX_CYCLIC, see README for further description)
1247 * Add support for INKA4X0 board
1249 * Patch by Steven Scholz, 12 Dec 2004:
1250 Fix typo in AT91 memory setup.
1252 * Patch by Martin Krause, 27 Oct 2004:
1253 - add support for "STK52xx" board (including PS/2 multiplexer)
1254 - add hardware detection for TQM5200
1256 * Clean up CMC PU2 flash driver
1258 * Update MAINTAINERS file
1260 * Fix bug in MPC823 LCD driver
1262 * Fix udelay() on AT91RM9200 for delays < 1 ms.
1264 * Enable long help on CMC PU2 board;
1266 increase CPU speed from 179 to 207 MHz.
1268 * Fix smc91111 ethernet driver for Xaeniax board (need to handle
1269 unaligned tail part specially).
1271 * Update for AT91RM9200DK and CMC_PU2 boards:
1272 - Enable booting directly from flash
1273 - fix CMC_PU2 flash driver
1275 * Fix mkimage usage message
1277 * Map SRAM on NC650 board
1279 * Work around for Ethernet problems on Xaeniax board
1281 * Patch by TsiChung Liew, 23 Sep 2004:
1282 - add support for MPC8220 CPU
1283 - Add support for Alaska and Yukon boards
1285 * Fix configuration for ERIC board (needs more room)
1287 * Adjust MIPS compiler options at run-time depending on tools version
1288 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1289 "-mcpu=4kc" for old tools)
1291 * Add passing of the command line and memory size information to the
1292 kernel on xaeniax board.
1294 * Enable NAND flash support for NC650 board.
1296 * Patch by Thomas Lange 07 Oct 2004:
1297 Updated README for DBAu1x00 boards to match current status
1299 * Patch by Philippe Robin, 28 Sept 2004:
1300 Fix Flash support for Versatile.
1302 * Patch by Roger Blofeld, 16 Sep 2004:
1303 Fix timeout for DHCP command retry
1305 * Patch by Pantelis Antoniou, 14 Sep 2004:
1306 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1308 * Patch by Pantelis Antoniou, 14 Sep 2004:
1309 Kick watchdog when bz-decompressing
1311 * Fix CFG_HZ problems on AT91RM9200 systems
1312 [Remember: CFG_HZ should be 1000 on ALL systems!]
1314 * Patch by Gridish Shlomi, 30 Aug 2004:
1315 - Add support to revA version of PQ27 and PQ27E.
1316 - Reverted MPC8260ADS baudrate back to original 115200
1318 * Patch by Hojin, 17 Sep 2004:
1319 Fix typo in cfi_flash.c
1321 * Patch by Mark Jonas, 09 September 2004:
1322 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1325 * Patch by Mark Jonas, 31 August 2004:
1326 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1327 improves FTP performance for MPC5200 systems. Enabled for IceCube
1330 * Patch by Michael Bendzick, 30 Aug 2004:
1331 - Improve platform.S code for omap1510inn that detects whether code
1332 is running from SDRAM or not. Patch allows SDRAM to be configured
1333 if code is running out of SRAM at 0x20000000.
1335 * Patch by Frederick Klatt, 30 Aug 2004:
1336 Add support for the Wind River SBC8540/SBC8560 boards
1338 * Configure SX1 board to use drivers/cfi_flash.c
1340 * Patches by Michael Bendzick, 30 Aug 2004:
1341 - Configure omap1510inn board to use drivers/cfi_flash.c
1342 - Make drivers/cfi_flash.c protect environment and redundant
1345 * Patch by Steven Scholz, 23 Jun 2004:
1346 - Add script (tools/img2brec.sh) to programm U-Boot into
1347 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1349 * Patches by Scott McNutt, 24 Aug 2004:
1350 - Add support for Altera Nios-II processors.
1351 - Add support for Psyent PCI-5441 board.
1352 - Add support for Psyent PK1C20 board.
1354 * Patches by Jon Loeliger, 24 Aug 2004:
1355 - Add support for the MPC8541 and MPC8555 CDS boards
1356 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1357 - Convert MPC85xxADS to use common CFI flash driver
1358 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1359 from board_early_init_f()
1360 - Provide SW workaround for PCI initialization on 85xx CDS
1362 * Patches by George G. Davis, 24 Aug 2004:
1363 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1364 - Remove static network setup defaults from mx1ads_config
1365 - update ARM boards to use constants from mach-types.h
1367 * Patch by Gary Jennejohn, 04 Oct 2004:
1368 - fix I2C on at91rm9200
1369 - add support for Ricoh RS5C372A RTC
1371 * Patch by Gary Jennejohn, 01 Oct 2004:
1372 - add support for CMC PU2 board
1373 - add support for I2C on at91rm9200
1375 * Patch by Gary Jennejohn, 28 Sep 2004:
1376 fix baudrate handling on at91rm9200
1378 * Patch by Yuli Barcohen, 22 Aug 2004:
1379 - remove ZPC.1900 board-specific flash driver;
1380 switch the port to generic CFI driver;
1383 * Patch by Hinko Kocevar, 21 Aug 2004:
1384 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1386 * Clean up tools/bmp_logo.c to not add trailing white space
1388 * Patch by Hinko Kocevar, 21 Aug 2004:
1389 - Group common framebuffer functions in common/lcd.c
1390 - Group common framebuffer macros and #defines in include/lcd.h
1391 - Provide calc_fbsize() for video ATAG
1393 * Patch by Sam Song, 21 August 2004:
1394 - Fix a typo in README
1395 - Align "(RO)" output for "flinfo" after "protect on"
1396 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1397 ratio 1:1 when core frequency less than 50MHz
1399 * Patches by Hinko Kocevar, 21 Aug 2004:
1400 - fix some "use of label at end of compound statement" warnings
1401 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1403 * Patch by Steven Scholz, 16 Aug 2004:
1404 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1405 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1406 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1407 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1408 into cpu/arm920t/$(SOC)/
1410 * Patches by Sean Chang, 09 Aug 2004:
1411 - Added support for both 8 and 16 bit mode access to System ACE CF
1413 - Fixed missing System ACE CF device during get FAT partition info
1414 in fat_register_device function.
1415 - Enabled System ACE CF support on ML300.
1417 * Patch by Sean Chang, 09 Aug 2004:
1418 Synch defines for saveenv and do_saveenv functions so they get
1419 compiled under the same statement.
1421 * Patch by Sean Chang, 09 Aug 2004:
1422 - Added I2C support for ML300.
1423 - Added support for ML300 to read out its environment information
1424 stored on the EEPROM.
1425 - Added support to use board specific parameters as part of
1426 U-Boot's environment information.
1427 - Updated MLD files to support configuration for new features
1430 * Patches by Travis Sawyer, 05 Aug 2004:
1431 - Remove incorrect bridge settings for eth group 6
1432 - Add call to setup bridge in ppc_440x_eth_initialize
1433 - Fix ppc_440x_eth_init to reset the phy only if its the
1434 first time through, otherwise, just check the phy for the
1435 autonegotiated speed/duplex. This allows the use of netconsole
1436 - only print the speed/duplex the first time the phy is reset.
1438 * Patch by Shlomo Kut, 29 Mar 2004:
1439 Add support for MKS Instruments "Quantum" board
1441 * Fix build problem with Cogent boards;
1442 avoid using <asm/byteorder.h> when using the host compiler
1444 * Patch by Ganapathi C, 04 Aug 2004:
1445 Fix NFS timeout issue
1447 * Patch by Yuli Barcohen, 19 Jul 2004:
1448 - Fix host tools building in Cygwin environment
1449 - Fix header files search order for host tools
1451 * Patch by Tom Armistead, 19 Jul 2004:
1452 Fix kgdb.S support for 74xx_75x cpu
1454 * Patch by Jon Loeliger, 15 Jul 2004:
1455 Fix MPC85xx I2C driver
1457 * Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1459 * Patch by Stephen Williams, 15 July 2004
1460 Set the PCI class code for JSE board as part of PCI interface setup
1462 * Patch by Michael Bendzick, 15 Jul 2004:
1463 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1464 CFG_FLASH_USE_BUFFER_WRITE is set
1466 * Patch by Yuli Barcohen, 13 Jul 2004:
1467 Allow clock setting on MPC866/MPC885 series chips according to
1468 environment variable `cpuclk'
1470 * Patch by Yuli Barcohen, 20 Apr 2004:
1471 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1473 * Patch by Vincent Dubey, 24 Sep 2004:
1474 Add support for xaeniax board
1476 * Add comment about non-GPL character of standalone applications to
1479 * Fix FEC ethernet problem on NSCU board.
1481 * Patch by Gary Jennejohn, 09 Sep 2004:
1482 allow to use USART1 as console port on at91rm9200dk boards
1484 * Patch by Stefan Roese, 16 Sep 2004:
1487 * Fix SysClk handling for PPChameleon and CATcenter boards
1489 * Patch by Detlev Zundel, 08 Sep 2004:
1490 Update etags build target
1492 * Improve NetConsole support: add support for broadcast destination
1493 address and buffered input.
1495 * Cleanup compiler warnings for GCC 3.3.x and later
1497 * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1499 * Add support for IDS "NC650" board
1501 * Add automatic update support for LWMON board
1503 * Clear Block Lock-Bits when erasing flash on LWMON board.
1505 * Fix return code of "fatload" command
1507 * Enable MSDOS/VFAT filesystem support for LWMON board
1509 * Patch by Martin Krause, 03 Aug 2004:
1510 change timing for SM501 graphics controller on TQM5200 module
1512 * Patch by Mark Jonas, 13 July 2004:
1513 - Total5200 LCD now run in little endian mode. Endianess conversion
1514 is done in hardware.
1515 - Removed last reference to "console" environment variable.
1517 * Patches by Lars Munch, 12 Jul 2004:
1518 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1520 - split out the LXT971A PHY from ns_9750_eth.h
1521 - split the dm9161 phy part out of at91rm9200_ether.c
1523 * Patch by Andreas Engel, 12 Jul 2004:
1524 Replaced hardcoded PL011 clock frequency with config variable.
1525 Fixed wrong CONFIG_CMD_DFL doc.
1527 * Patch by Thomas Viehweger, 09 Jun 2004:
1528 make it possible to remove chpart when there is only one partition
1530 * Add support for console over UDP (compatible to Ingo Molnar's
1531 netconsole patch under Linux)
1533 * Patch by Jon Loeliger, 16 Jul 2004:
1534 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1536 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1537 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1538 and CONFIG_L2_INIT_RAM options.
1539 - Refactor Local Bus initialization out of SDRAM setup.
1540 - Re-implement new version of LBC11/DDR11 errata workarounds.
1541 - Moved board specific PCI init parts out of CPU directory.
1542 - Added TLB entry for PCI-1 IO Memory
1543 - Updated README.mpc85xxads
1545 * Patch by Sascha Hauer, 28 Jun:
1546 - add generic support for Motorola i.MX architecture
1547 - add support for mx1ads, mx1fs2 and scb9328 boards
1549 * Patches by Marc Leeman, 23 Jul 2004:
1550 - Add define for the PCI/Memory Buffer Configuration Register
1551 - corrected comments in cpu/mpc824x/cpu_init.c
1553 * Add support for multiple serial interfaces
1554 (for example to allow modem dial-in / dial-out)
1556 * Patch by Stefan Roese, 15 Jul 2004:
1557 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1559 * Fix NSCU config; add ethernet wakeup code.
1561 * Add link for preloader for Motorola Coldfire to README.m68k
1563 * Patch by Michael Bendzick, 12 Jul 2004:
1564 fix output formatting in drivers/cfi_flash.c
1566 * Patch by Mark Jonas, 02 Jul 2004:
1567 Fix lowboot (again) on MPC5xxx
1569 * Patch by Curt Brune, 07 Jul 2004:
1570 relocate exception vectors on arm720t if needed
1572 * Patch by George G. Davis, 06 Jul 2004:
1573 - update mach-types.h to latest arm.linux.org.uk master list
1574 - Set correct OMAP1610 bi_arch_number for build target
1576 * Patch by Curt Brune, 06 Jul 2004:
1577 evb4510: add support for timer interrupt; cleanup
1579 * Patch by Dan Poirot, 06 Jul 2004:
1580 Fix sbc8260 environment variables
1582 * Cleanup redundand "console" environment variable
1584 * Patch by Mark Jonas, 05 Jul 2004:
1585 add support for the Total5100's and Total5200's LCD screen
1587 * Patches by Dan Eisenhut, 01 Jul 2004:
1589 - Move doc2000.h include to prevent compiler warning on some boards
1591 * Patch by Mark Jonas, 01 Jul 2004:
1592 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1593 MGT5100 and MPC5200 based Freescale platforms.
1595 * Patch by Philippe Robin, 01 Jul 2004:
1596 Add initialization for Integrator and versatile board files.
1598 * Patch by Hinko Kocevar, 01 Jun 2004:
1599 Fix VFD FB allocation, add LCD FB allocation on ARM
1601 * Patch by Martin Krause, 30 Jun 2004:
1602 Add support for TQM5200 board
1604 * Patch by Martin Krause, 29 Jun 2004:
1605 Add loopw command: infinite write loop on address range
1607 * Patches by Yasushi Shoji, 29 Jun 2004:
1608 - add empty include/asm-microblaze/processor.h
1609 - add to CREDITS and MAINTAINERS
1610 - add gd initialization
1611 - add MicroBlaze and SUZAKU board to MAKEALL script
1612 - add reset support for SUZAKU
1613 - add flush_cache() for MicroBlaze
1614 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1615 size flash memory on SUZAKU
1617 * Patch by Prakash Kumar, 27 Jun 2004:
1618 Add support for the PXA250 based Intrinsyc Cerf board.
1620 * Patch by Yasushi Shoji, 27 Jun 2004:
1621 fix comment in include/common.h
1623 * Rename SBC8560 into sbc8560 for consistency
1625 * Patch by Daniel Poirot, 24 Jun 2004:
1626 Add support for Wind River's sbc8240 board
1628 * Patches by Yasushi Shoji, 26 Jun 2004:
1629 - drivers/serial_xuartlite.c: fix "return 0" in void function
1630 - add microblaze support to mkimage tool
1632 * Patch by Fred Klatt, 25 Jun 2004:
1633 Add support for WindRiver's sbc8560 board
1635 * Patch by Nicolas Lacressonniere, 24 Jun 2004
1636 Small Bugs fixes for "at91rm9200dk" board:
1637 - Timing modifications for SPI DataFlash access
1638 - Fix NAND flash detection bug
1640 * Patch by Nicolas Lacressonniere, 24 Jun 2004:
1641 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1643 * Patch by Jon Loeliger, 17 June 2004:
1644 Completion of the 8540ADS/8560ADS updates:
1645 Fix some PCI and Rapid I/O memory maps,
1646 Initialize both TSEC 1 and 2,
1648 Update MAINTAINER for 85xx boards and README.mpc85xxads
1650 * Patch by Yuli Barcohen, 16 Jun 2004:
1651 Remove obsolete AdderII port which was superseded by unified
1652 AdderII/Adder87x port
1654 * Patch by Ladislav Michl, 16 Jun 2004:
1655 Fix gcc-3.3.3 warnings for smc91111.c
1657 * Patch by Stefan Roese, 02 Jul 2004:
1658 - Fix bug in 405 ethernet driver; allocated data not cleared!
1659 - Fix problem in 405 i2c driver; don't try to print without console!
1661 * Patch by Paul Ruhland, 11 Jun 2004:
1662 Remove debug code from 'board/lpd7a40x/flash.c'
1664 * Patch by Andrea Marson, 11 Jun 2004:
1665 Update for PPChameleon board:
1666 - support for SysClk @ 25MHz
1667 - support for Silicon Motion SM712 VGA controller
1670 * Patches by Richard Woodruff, 10 Jun 2004:
1671 - fix problems with examples/stubs.c for GCC >= 3.4
1672 - fix problems with gd initialization
1674 * Patch by Curt Brune, 17 May 2004:
1675 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1676 - Add support for ESPD-Inc. EVB4510 Board
1678 * Patch by Marc Leeman, 11 May 2004:
1679 Fix for MPC8245 - reading PPC Memory from another device with the
1680 PPC as PCI target device corrupts data due to interenal hardware
1683 * Fix "cls" command when used with splash screen
1685 * Increase NFS download timeout (now 1 min - 10 sec is to short for a
1686 slow download of a big image)
1688 * Add "cls" function to MPC823 LCD driver so we can reinitialize the
1689 display even after showing a bitmap
1691 * Patch by Josef Wagner, 04 Jun 2004:
1692 - DDR Ram support for PM520 (MPC5200)
1693 - support for different flash types (PM520)
1694 - USB / IDE / CF-Card / DiskOnChip support for PM520
1695 - 8 bit boot rom support for PM520/CE520
1696 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1697 - I2C and RTC support for CPC45
1698 - support of new flash type (28F160C3T) for CPC45
1700 * Fix flash parameters passed to Linux for PPChameleon board
1702 * Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
1704 * Patch by Paul Ruhland, 10 Jun 2004:
1705 fix support for Logic SDK-LH7A404 board and clean up the
1706 LH7A404 register macros.
1708 * Patch by Matthew McClintock, 10 Jun 2004:
1709 Modify code to select correct serial clock on Sandpoint8245
1711 * Patch by Robert Schwebel, 10 Jun 2004:
1712 Add support for Intel K3 strata flash.
1714 * Patch by Thomas Brand, 10 Jun 2004:
1715 Fix "loads" command on DK1S10 board
1717 * Patch by Yuli Barcohen, 09 Jun 2004:
1718 Add support for 8MB flash SIMM and JFFS2 file system on
1719 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
1721 * Patch by Yuli Barcohen, 09 Jun 2004:
1722 Add support for Analogue&Micro Adder87x and the older AdderII board.
1724 * Patch by Ming-Len Wu, 09 Jun 2004:
1725 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
1727 * Patch by Sam Song, 09 Jun 2004:
1728 - Add support for RPXlite_DW board
1729 - Update FLASH driver for 4*AM29DL323DB90VI
1730 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
1732 * Patch by Mark Jonas, 08 June 2004:
1733 - Make MPC5200 boards evaluate the SVR to print processor name and
1734 version in checkcpu() (cpu/mpc5xxx/cpu.c).
1736 * Patch by Kai-Uwe Bloem, 06 May 2004:
1737 Fix endianess problem in cramfs code
1739 * Patch by Tom Armistead, 04 Jun 2004:
1740 Add support for MAX6900 RTC
1742 * Patches by Ladislav Michl, 03 Jun 2004:
1743 - fix cfi_flash.c on LE systems
1744 - let 'make mrproper' delete u-boot.img as well
1745 - turn printf into debug in cfi_flash.c
1747 * Patch by Kurt Stremerch, 28 May 2004:
1748 Add support for Exys XSEngine board
1750 * Patch by Martin Krause, 27 May 2004:
1751 Fix a MPC5xxx I2C timing issue in i2c_probe().
1753 * Patch by Leif Lindholm, 27 May 2004:
1754 Fix board_init_f() for dbau1x00 board.
1756 * Patch by Imre Deak, 26 May 2004:
1757 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
1758 Set flash base accordingly, and decide whether to do or skip board
1759 specific setup steps.
1761 * Patch by Josef Baumgartner, 26 May 2004:
1762 Add missing define in include/asm-m68k/global_data.h
1764 * Patch by Josef Baumgartner, 25 May 2004:
1765 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
1767 * Patch by Paul Ruhland, 24 May 2004:
1768 fix SDRAM initialization for LPD7A400 board.
1770 * Patch by Jian Zhang, 20 May 2004:
1771 add support for environment in NAND flash
1773 * Patch by Yuli Barcohen, 20 May 2004:
1774 Add support for Interphase iSPAN boards.
1776 * Patches by Paul Ruhland, 17 May 2004:
1777 - Add I/O functions to the smc91111 ethernet driver to support the
1778 Logic LPD7A40x boards.
1779 - Add support for the Logic Zoom LH7A40x based SDK board(s),
1780 specifically the LPD7A400.
1782 * Patches by Robert Schwebel, 15 May 2004:
1783 - call MAC address reading code also for SMSC91C111;
1784 - make SMSC91C111 timeout configurable, remove duplicate code
1785 - fix get_timer() for PXA
1786 - update doc/README.JFFS2
1787 - use "bootfile" env variable also for jffs2
1789 * Patch by Tolunay Orkun, 14 May 2004:
1790 Add support for Cogent CSB472 board (8MB Flash Rev)
1792 * Patch by Thomas Viehweger, 14 May 2004:
1793 - flash.h: more flash types added
1794 - immap_8260.h: some bits added (useful for RMII)
1795 - cmd_coninfo.c: typo corrected, printf -> puts
1796 - reduced size by replacing spaces with tab
1798 * Patch by Robert Schwebel, 13 May 2004:
1799 Add 'imgextract' command: extract one part of a multi file image.
1801 * Patches by Jon Loeliger, 11 May 2004:
1802 Dynamically handle REV1 and REV2 MPC85xx parts.
1803 (Jon Loeliger, 10-May-2004).
1804 New consistent memory map and Local Access Window across MPC85xx line.
1805 New CCSRBAR at 0xE000_0000 now.
1806 Add RAPID I/O memory map.
1807 New memory map in README.MPC85xxads
1808 (Kumar Gala, 10-May-2004)
1809 Better board and CPU identification on MPC85xx boards at boot.
1810 (Jon Loeliger, 10-May-2004)
1811 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
1812 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
1813 (Jim Robertson, 10-May-2004)
1814 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
1815 Supports multiple PHYs.
1816 (Andy Fleming, 10-May-2004)
1817 Some README.MPC85xxads updates.
1818 (Kumar Gala, 10-May-2004)
1819 Copyright updates for "Freescale"
1820 (Andy Fleming, 10-May-2004)
1822 * Patch by Stephen Williams, 11 May 2004:
1823 Add flash support for ST M29W040B
1824 Reduce JSE specific flash.c to remove dead code.
1826 * Patch by Markus Pietrek, 04 May 2004:
1827 Fix clear_bss code for ARM systems (all except s3c44b0 which
1828 doesn't clear BSS at all?)
1830 * Fix "ping" problem on INC-IP board. Strange problem:
1831 Sometimes the store word instruction hangs while writing to one of
1832 the Switch registers, but only if the next instruction is 16-byte
1833 aligned. Moving the instruction into a separate function somehow
1834 makes the problem go away.
1836 * Patch by Rishi Bhattacharya, 08 May 2004:
1837 Add support for TI OMAP5912 OSK Board
1839 * Patch by Sam Song May, 07 May 2004:
1840 Fix typo of UPM table for rmu board
1842 * Patch by Pantelis Antoniou, 05 May 2004:
1843 - Intracom board update.
1846 * Add support for the second Ethernet interface for the 'PPChameleon'
1849 * Patch by Dave Peverley, 30 Apr 2004:
1850 Add support for OMAP730 Perseus2 Development board
1852 * Patch by Alan J. Luse, 29 Apr 2004:
1853 Fix flash chip-select (OR0) option register setting on FADS boards.
1855 * Patch by Alan J. Luse, 29 Apr 2004:
1856 Report MII network speed and duplex setting properly when
1857 auto-negotiate is not enabled.
1859 * Patch by Jarrett Redd, 29 Apr 2004:
1860 Fix hang on reset on Ocotea board due to flash in wrong mode.
1862 * Patch by Dave Peverley, 29 Apr 2004:
1863 add MAC address detection to smc91111 driver
1865 * Patch by David Müller, 28 Apr 2004:
1866 fix typo in lib_arm/board.c
1868 * Patch by Tolunay Orkun, 20 Apr 2004:
1869 - README update: add CONFIG_CSB272 and csb272_config
1870 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
1871 i2cfast environment variable
1873 * Patch by Yuli Barcohen, 19 Apr 2004:
1874 - Rename DUET_ADS to MPC885ADS
1875 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
1876 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
1877 - Clean up FADS family port to use the new defines
1879 * Fix PCI support on CPC45 board
1881 * Patch by Scott McNutt, 25 Apr 2004:
1882 Add Nios GDB/JTAG Console support:
1883 - Add stubs to support gdb via JTAG.
1884 - Add support for console over JTAG.
1887 * Add support for CATcenter board (based on PPChameleon ME module)
1889 * Patch by Klaus Heydeck, 12 May 2004:
1890 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
1891 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
1892 various changes to KUP4 board specific files
1894 * Fix minor network problem on MPC5200: need some delay between
1895 resetting the PHY and sending the first packet. Implemented in a
1896 "natural" way by invoking the PHY reset and initialization code
1897 only once after power on vs. each time the interface is brought up.
1899 * Add some limited support for low-speed devices to SL811 USB controller
1900 (at least "usb reset" now passes successfully and "usb info" displays
1901 correct information)
1903 * Change init sequence for multiple network interfaces: initialize
1904 on-chip interfaces before external cards.
1906 * Fix memory leak in the NAND-specific JFFS2 code
1908 * Fix SL811 USB controller when attached to a USB hub
1910 * Fix config option spelling in PM520 config file
1912 * Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
1913 patches by Pantelis Antoniou, 30 Mar 2004)
1915 * Fix minor NAND JFFS2 related issue
1917 * Fixes for SL811 USB controller:
1918 - implement workaround for broken memory stick
1919 - improve error handling
1921 * Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
1922 cope with congested networks.
1924 ======================================================================
1925 Changes for U-Boot 1.1.1:
1926 ======================================================================
1928 * Patch by Travis Sawyer, 23 Apr 2004:
1929 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
1930 errata from Vitesse Semiconductor.
1932 * Patch by Philippe Robin, 22 Apr 2004:
1933 Fix ethernet configuration for "versatile" board
1935 * Patch by Kshitij Gupta, 21 Apr 2004:
1936 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
1938 * Patch by Steven Scholz, 24 Feb 2004:
1939 Fix a bug in AT91RM9200 ethernet driver:
1940 The MII interface is now initialized before accessing the PHY.
1942 * Patch by John Kerl, 19 Apr 2004:
1943 Use U-boot's miiphy.h for PHY register names, rather than
1944 introducing a new header file.
1946 * Update pci_ids.h from linux-2.4.26
1948 * Patch by Masami Komiya, 19 Apr 2004:
1949 Fix problem cause by VLAN function on little endian architecture
1950 without VLAN environment
1952 * Clean up the TQM8xx_YYMHz configurations; allow to use the same
1953 binary image for all clock frequencies. Implement run-time
1954 optimization of flash access timing based on the actual bus
1957 * Modify KUP4X board configuration to use SL811 driver for USB memory
1958 sticks (including FAT / VFAT filesystem support)
1960 * Add SL811 Host Controller Interface driver for USB
1962 * Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
1964 * Patch by Pantelis Antoniou, 19 Apr 2004:
1965 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
1966 Minor patches for Intracom boards.
1968 * Patch by Christian Pell, 19 Apr 2004:
1969 cleanup support for CF/IDE on PCMCIA for PXA25X
1971 * Temporarily disabled John Kerl's extended MII command code because
1972 "miivals.h" is missing
1974 * Patches by Mark Jonas, 13 Apr 2004:
1975 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
1976 - Add sync instructions to IceCube SDRAM init code
1977 - Move SDRAM chip constants into seperate include files
1978 - Unify DDR and SDR initialization code
1979 - Unify all IceCube (Lite5xxx) target names
1981 * Patch by John Kerl, 16 Apr 2004:
1982 Enable ranges in mii command, e.g. mii read 0-1f 0 or
1983 mii read 4-7 18-1a. Also add mii dump subcommand for
1984 pretty-printing standard regs 0-5.
1986 * Patch by Stephen Williams, 16 April 2004:
1987 fix typo in JSE.h; update MAINTAINERS
1989 * Patch by Matthew S. McClintock, 14 Apr 2004:
1990 fix initdram function for utx8245 board
1992 * Patch by Markus Pietrek, 14 Apr 2004:
1993 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
1995 * Patch by Reinhard Meyer, 18 Apr 2004:
1996 provide the IDE Reset Function for EMK 5200 boards
1998 * Patch by Masami Komiya, 12 Apr 2004:
1999 fix pci_hose_write_config_{byte,word}_via_dword problems
2001 * Patch by Sangmoon Kim, 12 Apr 2004:
2002 Update max RAM size for debris board
2004 * Patch by Travis Sawyer, 08 Apr 2004:
2005 Add TLB entry for second DIMM slot on ocotea
2007 * Patch by Masami Komiya, 08 Apr 2004:
2008 add RTL8169 network driver
2010 * Patch by Dan Malek, 07 Apr 2004:
2011 - Add support for RPC/STx GP3, Motorola 8560 board
2012 - Update 85xx TSEC driver so it searches MII for first available PHY
2014 - Add functions to support console MII commands.
2016 * Patch by Tolunay Orkun, 07 Apr 2004:
2017 Move initialization of bi_iic_fast[]
2018 from board_init_f() to board_init_r()
2020 * Patch by Yasushi Shoji, 07 Apr 2004:
2021 Cleanup microblaze port
2023 * Patch by Sangmoon Kim, 07 Apr 2004:
2024 Add auto SDRAM module detection for Debris board
2026 * Patch by Rune Torgersen, 06 Apr 2004:
2027 - Fix some PCI problems on the MPC8266ADS board
2028 - Fix the location of some PCI entries in the immap structure
2030 * Patch by Yasushi Shoji, 07 Apr 2004:
2031 - add support for microblaze processors
2032 - add support for AtmarkTechno "suzaku" board
2034 * Configure PPChameleon board to use redundand environment in flash
2036 * Configure PPChameleon board to use JFFS2 NAND support.
2038 * Added support for JFFS2 filesystem (read-only) on top of NAND flash
2040 * Patch by Rune Torgersen, 16 Apr 2004:
2043 * Patches by Pantelis Antoniou, 16 Apr 2004:
2044 - add support for a new version of an Intracom board and fix
2045 various other things on others.
2046 - add verify support to the crc32 command (define
2047 CONFIG_CRC32_VERIFY to enable it)
2048 - fix FEC driver for MPC8xx systems:
2049 1. fix compilation problems for boards that use dynamic
2051 2. shut down FEC after network transfers
2052 - HUSH parser fixes:
2053 1. A new test command was added. This is a simplified version of
2054 the one in the bourne shell.
2055 2. A new exit command was added which terminates the current
2057 3. Fixed handing of $? (exit code of last executed command)
2058 - Fix some compile problems;
2059 add "once" functionality for the netretry variable
2061 * Patch by George G. Davis, 02 Apr 2004:
2062 add support for Intel Assabet board
2064 * Patch by Stephen Williams, 01 Apr 2004:
2065 Add support for Picture Elements JSE board
2067 * Patch by Christian Pell, 01 Apr 2004:
2068 Add CompactFlash support for PXA systems.
2070 * Patches by Pantelis Antoniou, 30 Mar 2004:
2071 - add auto-complete support to the U-Boot CLI
2072 - add support for NETTA and NETPHONE boards; fix NETVIA board
2073 - add support for the Epson 156x series of graphical displays
2074 (These displays are serial and not suitable for using a normal
2075 framebuffer console on them)
2076 - add infrastructure needed in order to POST any DSPs in a board
2077 - improve and fix various things in the MPC8xx FEC driver:
2078 1. The new 87x and 88x series of processors have two FECs,
2079 and the new driver supports them both.
2080 2. Another change in the 87x/88x series is support for
2081 the RMII (Reduced MII) interface. However numerous
2082 changes are needed to make it work since the PHYs
2083 are connected to the same lines. That means that
2084 you have to address them correctly over the MII
2086 3. We now correctly match the MII/RMII interface
2087 configuration to what the PHY reports.
2088 - Fix problem when readingthe MII status register. Due to the
2089 internal design of many PHYs you have to read the register
2090 twice. The problem is more apparent in 10Mbit mode.
2091 - add new mode ".jffs2s" for reading from a NAND device: it just
2092 skips over bad blocks.
2093 - add networking support for VLANs (802.1q), and CDP (Cisco
2095 - some minor patches / cleanup
2097 * Patch by Yuli Barcohen, 28 Mar 2004:
2098 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2099 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2100 - Change configuration method for MPC8260ADS family
2102 * add startup code to clear the BSS of standalone applications
2104 * Fix if / elif handling bug in HUSH shell
2106 ======================================================================
2107 Changes for U-Boot 1.1.0:
2108 ======================================================================
2110 * Patch by Mark Jonas: Remove config.tmp files only when
2111 unconfiguring the board
2113 * Adapt RMU board for bigger flash memory
2115 * Patch by Klaus Heydeck, 13 Mar 2003:
2116 Add support for KUP4X Board
2118 * Patch by Pavel Bartusek, 21 Mar 2004
2119 Add Reiserfs support
2121 * Patch by Hinko Kocevar, 20 Mar 2004
2122 - Add auto-release for SMSC LAN91c111 driver
2123 - Add save/restore of PTR and PNR regs as suggested in datasheet
2125 * Patch by Stephen Williams, 19 March 2004
2126 Increase speed of sector reads from SystemACE,
2127 shorten poll timeout and remove a useless reset
2129 * Patch by Tolunay Orkun, 19 Mar 2004:
2130 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2133 * Patch by Brad Kemp, 18 Mar 2004:
2134 prevent machine checks during a PCI scan
2136 * Patch by Pierre Aubert, 18 Mar 2004:
2137 Fix string cleaning in IDE identification
2139 * Patch by Pierre Aubert, 18 Mar 2004:
2140 - Unify video mode handling for Chips & Technologies 69000 Video
2141 chip and Silicon Motion SMI 712/710/810 Video chip
2142 - Add selection of the video output (CRT or LCD) via 'videoout'
2143 environment variable for the Silicon Motion
2146 * Patch by Pierre Aubert, 18 Mar 2004:
2147 include/common.h typo fix
2149 * Patches by Tolunay Orkun, 17 Mar 2004:
2150 - Add support for bd->bi_iic_fast[] initialization via environment
2151 variable "i2cfast" (CONFIG_I2CFAST)
2152 - Add "i2cfast" u-boot environment variable support for csb272
2154 * Patch by Carl Riechers, 17 Mar 2004:
2155 Ignore '\0' characters in console input for use with telnet and
2158 * Patch by Leon Kukovec, 17 Mar 2004:
2159 typo fix for strswab prototype #ifdef
2161 * Patches by Thomas Viehweger, 16 Mar 2004:
2162 - show PCI clock frequency on MPC8260 systems
2163 - add FCC_PSMR_RMII flag for HiP7 processors
2164 - in do_jffs2_fsload(), take load address from load_addr if not set
2165 explicit, update load_addr otherwise
2166 - replaced printf by putc/puts when no formatting is needed
2167 (smaller code size, faster execution)
2169 * Patch by Phillippe Robin, 16 Mar 2004:
2170 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2172 * Patch by Stephen Williams, 15 Mar 2004:
2173 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2175 * Patch by Tolunay Orkun, 15 Mar 2004:
2176 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2178 * Patch by Travis Sawyer, 15 Mar 2004:
2179 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2181 * Add start-up delay to make sure power has stabilized before
2182 attempting to switch on USB on SX1 board.
2184 * Patch by Josef Wagner, 18 Mar 2004:
2185 - Add support for MicroSys XM250 board (PXA255)
2186 - Add support for MicroSys PM828 board (MPC8280)
2187 - Add support for 32 MB Flash on PM825/826
2188 - new SDRAM refresh rate for PM825/PM826
2189 - added support for MicroSys PM520 (MPC5200)
2190 - replaced Query by Identify command in CPU86/flash.c
2191 to support 28F160F3B
2193 * Fix wrap around problem with udelay() on ARM920T
2195 * Add support for Macronix flash on TRAB board
2197 * Patch by Pierre Aubert, 15 Mar 2004:
2198 Fix buffer overflow in IDE identification
2200 * Fix power-off of LCD for out-of-band temperatures on LWMON board
2202 * Remove redundand #define in IceCube.h
2204 * Patch by Steven Scholz, 27 Feb 2004:
2205 - Adding get_ticks() and get_tbclk() for AT91RM9200
2206 - Many white space fixes in cpu/at91rm9200/interrupts.c
2208 * Patches by Steven Scholz, 20 Feb 2004:
2209 some cleanup in AT91RM9200 related code
2211 * Patches by Travis Sawyer, 12 Mar 2004:
2212 - Fix Gigabit Ethernet support for 440GX
2213 - Add Gigabit Ethernet Support to MII PHY utilities
2215 * Patch by Brad Kemp, 12 Mar 2004:
2216 Fixes for drivers/cfi_flash.c:
2217 - Better support for x8/x16 implementations
2218 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2219 - Added defines for AMD command and address constants
2221 * Patch by Leon Kukovec, 12 Mar 2004:
2222 Fix get_dentfromdir() to correctly handle deleted dentries
2224 * Patch by George G. Davis, 11 Mar 2004:
2225 Remove hard coded network settings in TI OMAP1610 H2
2226 default board config
2228 * Patch by George G. Davis, 11 Mar 2004:
2229 add support for ADS GraphicsClient+ board.
2231 * Patch by Pierre Aubert, 11 Mar 2004:
2232 - add bitmap command and splash screen support in cfb console
2233 - add [optional] origin in the bitmap display command
2235 * Patch by Travis Sawyer, 11 Mar 2004:
2236 Fix ocotea board early init interrupt setup.
2238 * Patch by Thomas Viehweger, 11 Mar 2004:
2239 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2241 * Patch by Stephan Linz, 09 Mar 2004
2242 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2244 * Patch by George G. Davis, 9 Mar 2004:
2245 fix recent build failure for SA1100 target
2247 * Patch by Travis Sawyer, 09 Mar 2004:
2248 Support native interrupt mode for the IBM440GX.
2249 Previously it was running in 440GP compatibility mode.
2251 * Patch by Philippe Robin, 09 Mar 2004:
2252 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2255 * Patch by Masami Komiya, 08 Mar 2004:
2256 Don't overwrite server IP address or boot file name
2257 when the boot server does not return values
2259 * Patch by Tolunay Orkun, 5 Mar 2004:
2260 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2262 * Patch by Tolunay Orkun, 5 Mar 2004:
2263 Fix early board initialization for Cogent CSB272 board
2265 * Patch by Ed Okerson, 3 Mar 2004:
2266 fix CFI flash writes for little endian systems
2268 * Patch by Reinhard Meyer, 01 Mar 2004:
2269 generalize USB and IDE support for MPC5200 with according
2270 changes to IceCube.h and TOP5200.h
2271 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2272 add info about USB and IDE to README
2274 * Patch by Yuli Barcohen, 4 Mar 2004:
2275 Fix problems with GCC 3.3.x which changed handling of global
2276 variables explicitly initialized to zero (now in .bss instead of
2279 * Patch by Leon Kukovec, 02 Mar 2004:
2280 add strswab() to fix IDE LBA capacity, firmware and model numbers
2281 on little endian machines
2283 * Patch by Masami Komiya, 02 Mar 2004:
2284 - Remove get_ticks() from NFS code
2285 - Add verification of RPC transaction ID
2287 * Patch by Pierre Aubert, 02 Mar 2004:
2288 cleanup for IDE and USB drivers for MPC5200
2290 * Patch by Travis Sawyer, 01 Mar 2004:
2292 - Add IBM PPC440GX Ref Platform support (Ocotea)
2293 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2294 Adapted to U-Boot and 440GX port
2296 - Add gracious handling of all Ethernet Pin Selections for 440GX
2297 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2299 - Add needed bit definitions
2302 * Patch by Carl Riechers, 1 Mar 2004:
2303 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2305 * Patch by Stephan Linz, 27 Feb 2004
2306 - avoid problems for targets without NFS download support
2308 * Patch by Rune Torgersen, 27 Feb 2004:
2309 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2310 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2311 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2313 * Patch by Masami Komiya, 27 Feb 2004:
2314 Fix rarpboot: add autoload by NFS
2316 * Patch by Dan Eisenhut, 26 Feb 2004:
2317 fix flash_write return value in saveenv
2319 * Patch by Stephan Linz, 11 Dec 2003
2320 expand config.mk to avoid trigraph warnings on NIOS
2322 * Rename "BMS2003" board into "HMI10"
2324 * SX1 patches: use "serial#" for USB serial #; use redundand environment
2325 storage; auto-set console on USB port (using preboot command)
2327 * Add support for SX1 mobile phone; add support for USB-based console
2328 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2330 * Fix LOWBOOT configuration for MPC5200 with DDR memory
2332 * Fix SDRAM timings for LITE5200 / IceCube board
2334 * Handle Auti-MDIX / connection status for INCA-IP
2336 * Fix USB problems when attempting to read 0 bytes
2338 * Patch by Travis Sawyer, 26 Feb 2004:
2339 Fix broken compile for XPEDITE1K target.
2341 * Patch by Stephan Linz, 26 Feb 2004:
2342 Bug fix for NFS code on NIOS targets
2344 * Patch by Stephen Williams, 26 Feb 2004:
2345 Break up SystemACE reads of large block counts
2347 * Patch by Pierre Aubert, 26 Feb 2004
2348 add IDE support for MPC5200
2350 * Patch by Masami Komiya, 26 Feb 2004:
2351 add autoload via NFS
2353 * Patch by Stephen Williams
2354 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2355 elsewhere in the source.
2357 * Patch by Steven Scholz, 25 Feb 2004:
2358 - Timeouts in FPGA code should be based on CFG_HZ
2359 - Minor cleanup in code for Altera FPGA ACEX1K
2361 * Patch by Steven Scholz, 25 Feb 2004:
2362 Changed "Directory Hierarchy" section in README
2364 * Patch by Masami Komiya, 25 Feb 2004:
2365 Reduce copy count in nfs_read_reply() of NFS code
2367 * Patch by Markus Pietrek, 24 Feb 2004:
2368 NS9750 DevBoard added
2370 * Patch by Pierre Aubert, 24 Feb 2004
2371 add USB support for MPC5200
2373 * Patch by Steven Scholz, 24 Feb 2004:
2374 - fix MII commands to use values from last command
2376 * Patch by Torsten Demke, 24 Feb 2004:
2377 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2379 * Patch by Rahul Shanbhag, 19 Feb 2004:
2380 Fixes for for OMAP1610 board:
2381 - shift some IRQ specific code to platform.S file
2382 - remove duplicatewatchdog reset code from start.S
2384 * Make Auto-MDIX Support configurable on INCA-IP board
2386 * Fix license for mkimage tool
2388 * Patch by Masami Komiya, 24 Feb 2004:
2389 Update NetBootFileXferSize in NFS code
2391 * Patch by Scott McNutt, 24 Feb 2004:
2392 fix packet length in NFS code
2394 * Patch by Masami Komiy, 22 Feb 2004:
2395 Add support for NFS for file download
2397 * Patch by Andrea Scian, 17 Feb 2004:
2398 Add support for S3C44B0 processor and DAVE B2 board
2400 * Patch by Steven Scholz, 20 Feb 2004:
2401 - Add support for MII commands on AT91RM9200 boards
2402 - some cleanup in AT91RM9200 ethernet code
2404 * Patch by Peter Ryser, 20 Feb 2004:
2405 Add support for the Xilinx ML300 platform
2407 * Patch by Stephan Linz, 17 Feb 2004:
2408 Fix watchdog support for NIOS
2410 * Patch by Josh Fryman, 16 Feb 2004:
2411 Fix byte-swapping for cfi_flash.c for different bus widths
2413 * Patch by Jon Diekema, 14 Jeb 2004:
2414 Remove duplicate "FPGA Support" notes from the README file
2416 * Patches by Reinhard Meyer, 14 Feb 2004:
2417 - update board/emk tree; use common flash driver
2418 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2419 [adapted for other PPC CPUs -- wd]
2420 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2422 * Patch by Jon Diekema, 13 Feb 2004:
2423 Call show_boot_progress() whenever POST "FAILED" is printed.
2425 * Patch by Nishant Kamat, 13 Feb 2004:
2426 Add support for TI OMAP1610 H2 Board
2427 Fixes for cpu/arm926ejs/interrupt.c
2428 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2429 Fix for a timer bug in OMAP1610 Innovator
2430 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2432 * Patches by Stephan Linz, 12 Feb 2004:
2433 - add support for NIOS timer with variable period preload counter value
2434 - prepare POST framework support for NIOS targets
2436 * Patch by Denis Peter, 11 Feb 2004:
2437 add POST support for the MIP405 board
2439 * Patch by Laurent Mohin, 10 Feb 2004:
2440 Fix buffer overflow in common/usb.c
2442 * Patch by Tolunay Orkun, 10 Feb 2004:
2443 Add support for Cogent CSB272 board
2445 * Patch by Thomas Elste, 10 Feb 2004:
2446 Add support for NET+50 CPU and ModNET50 board
2448 * Patch by Sam Song, 10 Feb 2004:
2449 Fix typos in cfi_flash.c
2451 * Patch by Leon Kukovec, 10 Feb 2004
2452 Fixed long dir entry slot id calculation in get_vfatname
2454 * Patch by Robin Gilks, 10 Feb 2004:
2455 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2456 !=, <>, <, >, <=, >=)
2458 * Fix problem with side effects in macros in include/usb.h
2460 * Patch by David Benson, 13 Nov 2003:
2461 bug 841358 - fix TFTP download size limit
2463 * Fixing bug 850768:
2464 improper flush_cache() in load_serial()
2466 * Fixing bug 834943:
2467 MPC8540 - missing volatile declarations
2469 * Patch by Stephen Williams, 09 Feb 2004:
2470 Add support for Xilinx SystemACE chip:
2471 - New files common/cmd_ace.c and include/systemace.h
2472 - Hook systemace support into cmd_fat and the partition manager
2474 * Patch by Travis Sawyer, 09 Feb 2004:
2475 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2477 * Patch by Travis Sawyer, 09 Feb 2004:
2479 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2480 - Add phymode for 440 enet
2483 - Change board_pre_init to board_early_init_f
2484 - Add user flash to bus controller setup
2486 - Fix is_pci_host to check GPIO for monarch bit
2487 - Force xpedite1k to pci conventional mode (via #define option)
2489 * Patch by Brad Kemp, 4 Feb 2004:
2490 - handle the machine check that is generated during the PCI scans
2492 - define the registers used in the IMMR by the PCI subsystem.
2494 * Patch by Pierre Aubert, 03 Feb 2004:
2495 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2497 * Patch by Jeff Angielski, 03 Feb 2004:
2498 Fix copy & paste error in cpu/mpc8260/pci.c
2500 * Patch by Reinhard Meyer, 24 Jan 2004:
2501 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2503 * Add Auto-MDIX support for INCA-IP
2507 * Patch by Josef Baumgartner, 10 Feb 2004:
2508 Fixes for Coldfire port
2510 * Patch by Brad Kemp, 11 Feb 2004:
2511 Fix CFI flash driver problems
2513 * Make sure to use a bus clock divider of 2 only when running TQM8xxM
2514 modules at CPU clock frequencies above 66 MHz.
2516 * Optimize flash programming speed for LWMON (by another 100% :-)
2518 * Patch by Jian Zhang, 3 Feb 2004:
2519 - Changed the incorrect FAT12BUFSIZE
2520 - data_begin in fsdata can be negative. Changed it to be short.
2522 * Patches by Stephan Linz, 30 Jan 2004:
2523 1: - board/altera/common/flash.c:flash_erase():
2524 o allow interrupts befor get_timer() call
2525 o check-up each erased sector and avoid unexpected timeouts
2526 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2527 o enclose sevenseg_set() in cpp condition
2528 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2529 - fix some typed in mistakes in the NIOS documentation
2530 2: - split DK1C20 configuration into several header files:
2531 o two new files for each NIOS CPU description
2532 o U-Boot related part is remaining in DK1C20.h
2533 3: - split DK1S10 configuration into several header files:
2534 o two new files for each NIOS CPU description
2535 o U-Boot related part is remaining in DK1S10.h
2536 4: - Add support for the Microtronix Linux Development Kit
2537 NIOS CPU configuration at the Altera Nios Development Kit,
2538 Stratix Edition (DK-1S10)
2539 5: - Add documentation for the Altera Nios Development Kit,
2540 Stratix Edition (DK-1S10)
2541 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2543 7: - Add support for the common U-Boot SPI framework at
2546 * Patch by Rahul Shanbhag, 28 Jan 2004:
2547 Fix flash protection/locking handling for OMAP1610 innovator board.
2549 * Patch by Rolf Peukert, 28 Jan 2004:
2550 fix flash write problems on CSB226 board (write with 32 bit bus width)
2552 * Patches by Mark Jonas, 16 Jan 2004:
2553 - fix rounding error when calculating baudrates for MPC5200 PSCs
2554 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2555 time which is not supported
2557 * Patch by Yuli Barcohen, 26 Jan 2004:
2558 Allow bzip2 compression for small memory footprint boards
2560 * Patch by Brad Kemp, 21 Jan 2004:
2561 Add support for CFI flash driver for both the Intel and the AMD
2564 * Patch by Travis Sawyer, 20 Jan 2004:
2565 Fix pci bridge auto enumeration of sibling p2p bridges.
2567 * Patch by Tolunay Orkun, 12 Jan 2004:
2568 Add some delays as needed for Intel LXT971A PHY support
2570 * Patches by Stephan Linz, 09 Jan 2004:
2571 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2572 - make DK1C20 board configuration related to ASMI conform to
2575 * Patch by Anders Larsen, 09 Jan 2004:
2577 ARM memory layout fixes: the abort-stack is now set up in the
2578 correct RAM area, and the BSS is zeroed out as it should be.
2580 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2581 of the linker scripts are replaced by '__bss_start' and '_end',
2582 resp., which is a further step to eliminate unnecessary differences
2583 between the implementation of the CPU architectures.
2585 * Patch by liang a lei, 9 Jan 2004:
2586 Fix Intel 28F128J3 ID in include/flash.h
2588 * Patch by Masami Komiya, 09 Jan 2004:
2589 add support for TB0229 board (NEC VR4131 MIPS processor)
2591 * Patch by Leon Kukovec, 12 Dec 2003:
2592 changed extern __inline__ into static __inline__ in
2593 include/linux/byteorder/swab.h
2595 * Patch by Travis Sawyer, 30 Dec 2003:
2596 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2597 select MDI port based on enabled EMAC device.
2598 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2601 * Patch by Wolter Kamphuis, 15 Dec 2003:
2602 made CONFIG_SILENT_CONSOLE usable on all architectures
2604 * Disable date command on TQM866M - there is no RTC on MPC866
2606 * Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2608 * Implement adaptive SDRAM timing configuration based on actual CPU
2609 clock frequency for INCA-IP; fix problem with board hanging when
2610 switching from 150MHz to 100MHz
2612 * Add PCMCIA CS support for BMS2003 board
2614 * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2615 see doc/README.MPC866 for details;
2616 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2617 calculate CPU clock frequency from PLL register values.
2619 * Add support for 128 MB RAM on TQM8xxL/M modules
2621 * Fix PS/2 keyboard problem caused by statically initialized variable
2622 pointing to a location in flash
2624 * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2626 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
2627 before we can access it; add delay in case we are faster (with no
2630 * Cleanup of some init functions
2632 * Make sure SCC Ethernet is always stopped by the time we boot Linux
2633 to avoid Linux crashes by early packets coming in.
2635 * Accelerate flash accesses on LWMON board by using buffered writes
2637 * Fix typo in Makefile;
2638 fix problem with PARTNUM detection
2640 * Patch by Reinhard Meyer, 09 Jan 2004:
2641 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2643 * Add support for IDE LED on BMS2003 board
2644 (exclusive with status LED!)
2646 * Add support for PS/2 keyboard (used with PS/2 multiplexor on
2649 * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2650 Add common files for "emk" boards
2652 * Add a common get_ram_size() function and modify the the
2653 board-specific files to invoke that common implementation.
2655 ======================================================================
2656 Changes for U-Boot 1.0.1:
2657 ======================================================================
2659 * Set default clock for INCA-IP to 150 MHz
2661 * Make BMS2003 use a separate config file to avoid #ifdef mess;
2662 add I2C support; add support for DS1337 RTC
2664 * Add CompactFlash support for BMS2003 board
2666 * Add support for status LED on BMS2003 board
2668 * Patch by Scott McNutt, 02 Jan 2004:
2669 Add support for the Nios Active Serial Memory Interface (ASMI)
2672 * Patch by Andrea Marson, 16 Dec 2003:
2673 Add support for the PPChameleon ME and HI modules
2675 * Patch by Yuli Barcohen, 22 Dec 2003:
2676 Add support for Motorola DUET ADS board (MPC87x/88x)
2678 * Patch by Robert Schwebel, 15 Dec 2003:
2679 add support for cramfs (uses JFFS2 command interface)
2681 * Patches by Stephan Linz, 11 Dec 2003:
2682 - more documentation for NIOS port
2683 - new struct nios_pio_t, struct nios_spi_t
2684 - Reconfiguration for NIOS Development Kit DK1C20:
2685 o move board related code from board/dk1c20
2686 to board/altera/dk1c20
2687 o create a new common source path board/altera/common
2688 and move generic flash access stuff into it
2689 o change/expand configuration file DK1C20.h
2690 - Add support for NIOS Development Kit DK1S10
2691 - Add status LED support for NIOS systems
2692 - Add dual 7-segment LED support for Altera NIOS DevKits
2694 * Patch by Ronen Shitrit, 10 Dec 2003:
2695 Add support for the Marvell DB64360 / DB64460 development boards
2697 * Patch by Detlev Zundel, 10 Dec 2003:
2698 fix dependency problem in examples/Makefile
2700 * Patch by Denis Peter, 8 Dec 2003
2701 - add support for the PATI board (MPC555)
2702 - add SPI support for the MPC5xx
2704 * Patch by Anders Larsen, 08 Dec 2003:
2705 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
2706 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
2707 cleanup some redundand #defines
2709 * Patch by André Schwarz, 8 Dec 2003:
2710 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
2711 - TX and RX deskriptors must be quad-word aligned
2712 - does not work with only one TX deskriptor
2713 - standard reset method does not work
2715 * Patch by Masami Komiya, 08 Dec 2003:
2716 add RTL8139 ethernet driver
2718 * Patches by Ed Okerson, 07 Dec 2003:
2719 - fix ethernet for the AU1x00 processors in little-endian mode.
2720 - extend memsetup.S for the AU1x00 processors in BE and LE modes
2722 * Minor code cleanup (coding style)
2724 * Patch by Reinhard Meyer, 30 Dec 2003:
2725 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
2726 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
2727 - turned debug print of PHY registers into a function (called in two places)
2728 - added support for EMK MPC5200 based modules
2730 * Fix MPC8xx PLPRCR_MFD_SHIFT typo
2732 * Add support for TQM866M modules
2734 * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
2736 * Fix a few compiler warnings
2738 * Patch by Reinhard Meyer, 28 Dec 2003:
2739 Add initial support for TOP5200 board
2741 * Make CPU clock on ICA-IP board controllable by a "cpuclk"
2742 environment variable which can set to "100", "133", or "150". The
2743 CPU clock will be configured accordingly upon next reboot. Other
2744 values are ignored. In case of an invalid or undefined "cpuclk"
2745 value, the compile-time default CPU clock speed will be used.
2747 * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
2748 window that is used to access the UART registers by the Linux driver)
2750 * Patch by Reinhard Meyer, 20 Dec 2003:
2751 Fix clock calculation for the MPC5200 for higher clock frequencies
2752 (above 2**32 / 10 = 429.5 MHz).
2754 * Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
2756 * Fix IceCube CLKIN configuration (it's 33.000000MHz)
2758 * Add new configuration for IceCube board with DDR memory
2760 * Update TRAB memory configurations
2762 * Add JFFS2 support for INCA-IP board
2764 * Patch by Bill Hargen, 09 Dec 2003:
2765 - BUBINGA405EP: changed flash driver to protect top sector containing
2767 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
2768 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
2769 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
2770 - 405EP: added/fixed support for "reginfo" command.
2771 - 4xx: removed spurious MII error messages on "mii info" command.
2773 * Patch by Bernhard Kuhn, 28 Nov 2003:
2774 add support for Coldfire CPU
2775 add support for Motorola M5272C3 and M5282EVB boards
2777 * Patch by Pierre Aubert, 24 Nov 2003:
2778 - add a return value for the fpga command
2779 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
2780 is defined. If ide_preinit fails, ide_init is aborted.
2781 - fix an endianess problem in fat.h
2783 * Patch by Wolter Kamphuis, 05 Dec 2003:
2784 Add support for SNMC's QS850/QS823/QS860T boards
2786 * Patch by Yuli Barcohen, 3 Dec 2003:
2787 "revive" U-Boot support for old Motorola MPC860ADS board
2789 * Patch by Cam(ilo?), 03 Dec 2003:
2790 make examples build even with broken Montavista objcopy
2792 * Patch by Pavel Bartusek, 27 Nov 2003:
2793 fix conversion problem with "bootretry" evironment variable
2795 * Patch by Andre Schwarz, 24 Nov 2003:
2796 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
2798 * Patch by Pavel Bartusek, 21 Nov 2003:
2799 set ZMII bridge speed on 440
2801 * Patch by Anders Larsen, 17 Nov 2003:
2802 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
2804 * Patches by David Müller, 14 Nov 2003:
2805 - board/mpl/common/common_util.c
2806 * implement support for BZIP2 compressed images
2807 * various cleanups (printf -> puts, ...)
2808 - board/mpl/common/flash.c
2809 * report correct errors to upper layers
2810 * check the erase fail and VPP low bits in status reg
2811 - board/mpl/vcma9/cmd_vcma9.c
2812 - board/mpl/vcma9/flash.c
2813 * various cleanups (printf -> puts, ...)
2815 * fix typo in comment
2816 - cpu/arm920t/usb_ohci.c
2817 * support for S3C2410 is missing in #if line
2819 * reinit some registers in case of error (cable missing, ...)
2821 * support for USB/MMC devices is missing in #if line
2822 - include/configs/MIP405.h
2823 - include/configs/PIP405.h
2824 * enable BZIP2 support
2825 * enlarge malloc space to 1MiB because of BZIP2 support
2826 - include/configs/VCMA9.h
2827 * enable BZIP2 support
2828 * enlarge malloc space to 1MiB because of BZIP2 support
2829 * enable USB support
2830 - lib_arm/armlinux.c
2831 * change calling convention of ARM Linux kernel as
2832 described on http://www.arm.linux.org.uk/developer/booting.php
2834 * Patch by Thomas Lange, 14 Nov 2003:
2835 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
2836 support all these AMD boards.
2838 * Patch by Thomas Lange, 14 Nov 2003:
2839 Workaround for mips au1x00 physical memory accesses (the au1x00
2840 uses a 36 bit bus internally and cannot access physical memory
2841 directly. Use the uncached SDRAM address instead of the physical
2844 * Patch by Xue Ligong (Joe), 13 Nov 2003:
2845 add Realtek 8019 ethernet driver
2847 * Patch by Yuli Barcohen, 13 Nov 2003:
2848 MPC826xADS/PQ2FADS cleanup
2850 * Patch by Anders Larsen, 12 Nov 2003:
2851 Update README to mark the PORTIO commands non-standard
2853 * Patch by Nicolas Lacressonnière, 12 Nov 2003:
2854 update for for Atmel AT91RM9200DK development kit:
2855 - support for environment variables in DataFlash
2856 - Atmel DataFlash AT45DB1282 support
2858 * Patch by Jeff Carr, 11 Nov 2003:
2859 add support for new version of 8270 processors
2861 * Patches by George G. Davis, 05 Nov 2003:
2862 - only pass the ARM linux initrd tag to the kernel when an initrd
2864 - update omap1510inn configuration file
2866 * Patches by Stephan Linz, 3 Nov 2003:
2867 - more endianess fixes for LAN91C111 driver
2868 - CFG_HZ configuration patch for NIOS Cyclone board
2870 * Patch by Stephan Linz, 28 Oct 2003:
2871 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
2873 * Patch by Steven Scholz, 20 Oct 2003:
2874 - make "mii info <addr>" show infor for PHY at "addr" only
2875 - Endian fix for miiphy_info()
2877 * Patch by Gleb Natapov, 19 Sep 2003:
2878 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
2880 * Patch by Anders Larsen, 17 Sep 2003:
2881 Bring ARM memory layout in sync with the documentation:
2882 stack and malloc-heap are now located _below_ the U-Boot code
2884 * Accelerate booting on TRAB board: read and check autoupdate image
2885 headers first instead of always reading the whole images.
2887 * Fix type in MPC5XXX code (pointed out by Victor Wren)
2889 * Enabled password check on RMU board
2891 * Fix configuration problem with IceCube in LOWBOOT configuration:
2892 envrionment got embedded, corrupting the image layout.
2894 * Fix NEC display names (it's 6440 [for 640x480], not 6640).
2896 * Added BMS2003 board
2897 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
2899 * Fix flash driver for TRAB board (must use Unlock Bypass Reset
2900 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
2903 * Use "-fPIC" instead of "-mrelocatable" to prevent problems with
2906 * Add checksum verification to 'imls' command
2908 * Add bd_info fields needed for 4xx Linux I2C driver
2910 * Patch by Martin Krause, 4 Nov. 2003:
2911 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
2913 * Print used network interface when CONFIG_NET_MULTI is set
2915 * Patch by Bernhard Kuhn, 28 Oct 2003:
2916 Add low boot support for MPC5200
2918 * Fix problem with dual PCMCIA support (NSCU)
2920 * Fix MPC5200 I2C initialization function
2922 ======================================================================
2923 Changes for U-Boot 1.0.0:
2924 ======================================================================
2926 * Fix parameter passing to standalone images with bootm command
2928 * Patch by Kyle Harris, 30 Oct 2003:
2929 Fix build errors for ixdp425 board
2931 * Patch by David M. Horn, 29 Oct 2003:
2932 Fixes to build under CYGWIN
2934 * Get IceCube MGT5100 working (again)
2936 * Fix problems in memory test on some boards (which was not
2937 non-destructive as intended)
2939 * Patch by Gary Jennejohn, 28 Oct 2003:
2940 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
2941 to prevent stack overflow on ARM systems
2943 * Patch by Stephan Linz, 28 Oct 2003:
2944 fix init sequence error for NIOS port
2946 * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
2948 * Add CONFIG_VERSION_VARIABLE to TRAB configuration
2950 * Patch by Xiao Xianghua, 23 Oct 2003:
2951 small patch for mpc85xx
2953 * Fix small problem in MPC5200 I2C driver
2955 * Fix FCC3 support on ATC board
2957 * Correct header printing for multi-image files in do_bootm()
2959 * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
2961 * Fix PCI problems on PPChameleon board
2963 * Patch by Steven Scholz, 18 Oct 2003:
2964 Fix AT91RM9200 ethernet driver
2966 * Patch by Nye Liu, 17 Oct 2003:
2967 Fix typo in include/mpc8xx.h
2969 * Patch by Richard Woodruff, 16 Oct 03:
2970 Fixes for cpu/arm925/interrupt.c
2971 - Initialize timestamp & lastdec vars.
2972 - fix timestamp overflows.
2973 - fix lastdec overflow.
2974 - smarter normalization to allow udelay() below 1ms to work.
2976 * Patch by Scott McNutt, 16 Oct
2977 add networking support for the Altera Nios Development Kit,
2978 Cyclone Edition (DK-1C20)
2980 * Patch by Jon Diekema, 14 Oct 2003:
2981 add hint about doc/README.silent to README file
2983 * Add CompactFlash support for NSCU
2985 * Fix PCI problems on PPChameleonEVB
2987 * TRAB auto-update: Base decision if we have to strip the image
2988 header on image type as encoded in the header
2989 (include image type patch by Martin Krause, 17 Oct 2003)
2991 * Patches by Xianghua Xiao, 15 Oct 2003:
2993 - Added Motorola CPU 8540/8560 support (cpu/85xx)
2994 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
2995 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
2997 * Fix flash timings on TRAB board
2999 * Make sure HUSH is initialized for running auto-update scripts
3001 * Make 5200 reset command _really_ reset the board, without running
3002 any other code after it
3004 * Fix errors with flash erase when range spans across banks
3005 that are mapped in reverse order
3007 * Fix flash mapping and display on P3G4 board
3009 * Patch by Kyle Harris, 15 Jul 2003:
3010 - add support for Intel IXP425 CPU
3011 - add support for IXDP425 eval board
3013 * Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3014 for more information
3016 * Patch by Steven Scholz, 10 Oct 2003
3017 - Add support for Altera FPGA ACEX1K
3019 * Patches by Thomas Lange, 09 Oct 2003:
3020 - fix cmd_ide.c for non ppc boards (read/write functions did not
3021 add ATA base address)
3022 - fix for shannon board
3023 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
3024 - Endian swap ATA identity for all big endian CPUs, not just PPC
3025 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3027 - add support for dbau1x00 board (MIPS32)
3029 * Patch by Sangmoon Kim, 07 Oct 2003:
3030 add support for debris board
3032 * Patch by Martin Krause, 09 Oct 2003:
3033 Fixes for TRAB board
3034 - /board/trab/rs485.c: correct baudrate
3035 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
3036 udelay(); fix some timing problems with adc controller
3037 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3038 modify commands: touch and buzzer
3040 * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3041 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3042 Use direct function calls for auto_update instead of hush commands
3044 * Patch by Scott McNutt, 04 Oct 2003:
3045 - add support for Altera Nios-32 CPU
3046 - add support for Nios Cyclone Development Kit (DK-1C20)
3048 * Patch by Steven Scholz, 29 Sep 2003:
3049 - A second parameter for bootm overwrites the load address for
3050 "Standalone Application" images.
3051 - bootm sets environment variable "filesize" to the resulting
3052 (uncompressed) data length for "Standalone Application" images
3053 when autostart is set to "no". Now you can do something like
3054 if bootm $fpgadata $some_free_ram ; then
3055 fpga load 0 $some_free_ram $filesize
3058 * Patch by Denis Peter, 25 Sept 2003:
3059 add support for the MIP405 Rev. C board
3061 * Patch by Yuli Barcohen, 25 Sep 2003:
3062 add support for Zephyr Engineering ZPC.1900 board
3064 * Patch by Anders Larsen, 23 Sep 2003:
3065 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3066 implemented for the x86 architecture)
3068 * Patch by Sangmoon Kim, 23 Sep 2003:
3069 fix pll_pci_to_mem_multiplier table for MPC8245
3071 * Patch by Anders Larsen, 22 Sep 2003:
3072 enable timed autoboot on PXA
3074 * Patch by David Müller, 22 Sep 2003:
3075 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3076 returns correct libgcc file path
3077 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3078 time on s3c24x0 systems
3080 * Patch by Jon Diekema, 19 Sep 2003:
3081 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3082 link state to the fault LED.
3083 - In NetLoop, make the Fault LED reflect the link status. The link
3084 status gets updated on entry, and on timeouts.
3086 * Patch by Anders Larsen, 18 Sep 2003:
3087 allow mkimage to build and run on Cygwin-hosted systems
3089 * Patch by Frank Müller, 18 Sep 2003:
3090 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3093 * Patch by Pantelis Antoniou, 16 Sep 2003:
3094 add tool to compute fileds in the PLPRCR register for MPC86x
3096 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3098 * Fix build problems under FreeBSD
3100 * Add generic filesystem image type
3102 * Make fatload set filesize environment variable
3104 * enable basic / medium / high-end configurations for PPChameleonEVB
3105 board; fix NAND code
3107 * enable TFTP client code to specify to the server the desired
3108 timeout value (see RFC-2349)
3110 * Improve SDRAM setup for TRAB board
3112 * Suppress all output with splashscreen configured only if "splashimage"
3115 * Fix problems with I2C support for mpc5200
3117 * Adapt TRAB configuration and auto_update to new memory layout
3119 * Add configuration for wtk board
3121 * Add support for the Sharp LQ065T9DR51U LCD display
3123 * Patch by Rune Torgersen, 17 Sep 2003:
3124 - Fixes for MPC8266 default config
3125 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
3127 * Patches by Jon Diekema, 17 Sep 2003:
3128 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3131 - adjust "help" output
3133 * Patches by Anders Larsen, 17 Sep 2003:
3134 - fix spelling errors
3135 - set GD_FLG_DEVINIT flag only after device function pointers
3137 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3139 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3140 - trigger watchdog while waiting in serial driver
3142 * Add auto-update code for TRAB board using USB memory sticks,
3143 support new configuration with more memory
3145 * disable MPC5200 bus pipelining as workaround for bus contention
3147 * Modify XLB arbiter priorities on MPC5200 so all devices use same
3148 priority; configure critical interrupts to be handled like external
3151 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3152 go back to 66 MHz for stability
3154 * Patches by Jon Diekema, 15 Sep 2003:
3155 - add description for missing CFG_CMD_* entries in the README file
3158 * Patch by Gleb Natapov, 14 Sep 2003:
3159 enable watchdog support for all MPC824x boards that have a watchdog
3161 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3162 "Non-octet Aligned Frame" errors we see at 100 Mbps
3164 * Patch by Sharad Gupta, 14 Sep 2003:
3165 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3167 * Patch by llandre, 11 Sep 2003:
3168 update configuration for PPChameleonEVB board
3170 * Patch by David Müller, 13 Sep 2003:
3171 various changes to VCMA9 board specific files
3173 * Add I2C support for MGT5100 / MPC5200
3175 * Patch by Rune Torgersen, 11 Sep 2003:
3176 Changed default memory option on MPC8266ADS to NOT be Page Based
3177 Interleave, since this doesn't work very well with the standard
3180 * Patch by George G. Davis, 12 Sep 2003:
3181 fix Makefile settings for sk98 driver
3183 * Patch by Stefan Roese, 12 Sep 2003:
3184 - new boards added: DP405, HUB405, PLU405, VOH405
3185 - some esd boards updated
3186 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3188 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3190 * Patch by Martin Krause, 11 Sep 2003:
3191 add burn-in tests for TRAB board
3193 * Enable instruction cache on MPC5200 board
3195 * Patch by Denis Peter, 11 Sep 2003:
3196 - fix USB data pointer assignment for bulk only transfer.
3197 - prevent to display erased directories in FAT filesystem.
3199 * Change output format for NAND flash - make it look like for other
3202 ======================================================================
3203 Changes for U-Boot 0.4.8:
3204 ======================================================================
3206 * Add I2C and RTC support for RMU board
3208 * Patches by Denis Peter, 9 Sep 2003:
3209 add FAT support for IDE, SCSI and USB
3211 * Patches by Gleb Natapov, 2 Sep 2003:
3212 - cleanup of POST code for unsupported architectures
3213 - MPC824x locks way0 of data cache for use as initial RAM;
3214 this patch unlocks it after relocation to RAM and invalidates
3217 * Patch by Gleb Natapov, 30 Aug 2003:
3218 new I2C driver for mpc107 bridge. Now works from flash.
3220 * Patch by Dave Ellis, 11 Aug 2003:
3221 - JFFS2: fix typo in common/cmd_jffs2.c
3222 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3223 - JFFS2: remove node version 0 warning
3224 - JFFS2: accept JFFS2 PADDING nodes
3225 - SXNI855T: add AM29LV800 support
3226 - SXNI855T: move environment from EEPROM to flash
3227 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3229 * Patch by Bill Hargen, 11 Aug 2003:
3230 fixes for I2C on MPC8240
3231 - fix i2c_write routine
3232 - fix iprobe command
3233 - eliminates use of global variables, plus dead code, cleanup.
3235 * Add support for USB Mass Storage Devices (BBB)
3236 (tested with USB memory sticks only)
3238 * Avoid flicker on TRAB's VFD
3240 * Add support for SK98xx driver
3242 * Add PCI support for SL8245 board
3244 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3245 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3246 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3248 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3249 to allow for more accurate baudrate settings
3250 (error now 0.7% at 115 kbps, instead of 3.5% before)
3252 * Patch by Andreas Mohr, 4 Sep 2003:
3253 Fix a lot of spelling errors
3255 * Add support for PPChameleon Eval Board
3257 * Add support for P3G4 board
3259 * Fix problem with MGT5100 FEC driver: add "early" MAC address
3262 * Patch by Yuli Barcohen, 7 Aug 2003:
3263 check BCSR to detect if the board is configured in PCI mode
3265 ======================================================================
3266 Changes for U-Boot 0.4.7:
3267 ======================================================================
3269 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
3270 add support for Adder II MPC852T module
3272 * Patch by George G. Davis, 19 Aug 2003:
3273 fix TI Innovator/OMAP1510 pin configs
3275 * Patches by Kshitij, 18 Aug 2003
3276 - add support for arm926ejs cpu core
3277 - add support for TI OMAP 1610 Innovator Board
3279 * Patch by Yuli Barcohen, 14 Aug 2003:
3280 add support for bzip2 uncompression
3282 * Add GCC library to examples/Makefile so GCC utility functions will
3285 * Add I2C and RTC support for RMU board using software I2C driver
3286 (because of better response to iprobe command); fix problem with
3289 * Patch by Matthias Fuchs, 28 Aug 2003:
3290 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3291 CONFIG_BOOTP_MAKS (see README).
3293 * Fix ICU862 environment problem
3295 * Fix RAM size detection for RMU board
3297 * Implement "reset" for MGT5100/MPC5200 systems
3299 ======================================================================
3300 Changes for U-Boot 0.4.6:
3301 ======================================================================
3303 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3304 allow selection of clock frequency as "make" target
3306 * Implement memory autosizing code for IceCube boards
3308 * Configure network port on INCA-IP for autonegotiation
3310 * Fix overflow problem in network timeout code
3312 * Patch by Richard Woodruff, 8 Aug 2003:
3313 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3315 ======================================================================
3316 Changes for U-Boot 0.4.5:
3317 ======================================================================
3319 * Update for TQM board defaults:
3320 disable clocks_in_mhz, enable boot count limit
3322 * Removed tools/gdb from "make all" target. Added make target "gdbtools"
3323 in toplevel directory instead. Removed astest.c from tools/gdb because
3324 it is no longer relevant.
3326 * Fix PCI support for MPC5200 / IceCube Board
3328 * Map ISP1362 USB OTG controller for NSCU board
3330 * Patch by Brad Parker, 02 Aug 2003:
3331 fix sc520_cdp problems
3333 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3335 * Allow erase command to cross flash bank boundaries
3337 * Patch by Scott McNutt, 21 Jul 2003:
3338 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3339 Both LynxOS and BlueCat linux KDIs are supported.
3341 * Patch by Richard Woodruff, 25 Jul 2003:
3342 use more reliable reset for OMAP/925T
3344 * Patch by Nye Liu, 25 Jul 2003:
3345 fix typo in mpc8xx.h
3347 * Patch by Richard Woodruff, 24 Jul 2003:
3348 Fixes for cmd_nand.c:
3349 - Fixed null dereferece which could result in incorrect ECC values.
3350 - Added support for devices with no Ready/Busy signal hooked up.
3351 - Added OMAP1510 read/write protect handling.
3352 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3354 - Switched default ECC to be JFFS2.
3356 * Allow crc32 to be used at address 0x000
3358 * Provide consistent interface to standalone applications to access
3359 the 'global_data' structure
3360 Provide a doc/README.standalone more useful to users/developers.
3362 * Make IceCube MGT5100 FEC driver work
3364 * Implement new mechanism to export U-Boot's functions to standalone
3365 applications: instead of using (PPC-specific) system calls we now
3366 use a jump table; please see doc/README.standalone for details
3368 * Patch by Dave Westwood, 24 Jul 2003:
3369 added support for Unity OS (a proprietary OS)
3371 * Patch by Detlev Zundel, 23 Jul 2003:
3372 add "imls" command to print flash table of contents
3374 * Fix cold boot detection for log buffer reset
3376 * Return error for invalid length specifiers with "cp.X" etc.
3378 * Fix startup problem on MIPS
3380 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
3381 bitmap support is configured
3383 * Patch by Bill Hargen, 18 Jul 2003:
3384 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3386 * Patch by Denis Peter, 18 Jul 2003:
3387 - fix memory configuration for MIP405T
3388 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3390 * Cleanup of TQM82xx configurations; use "official" board types
3391 to make selection easier.
3393 * Patch by Martin Krause, 17 Jul 2003:
3394 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3396 * Patch by Richard Woodruff, 17 July 03:
3397 - Fixed bug in OMAP1510 baud rate divisor settings.
3399 * Patch by Nye Liu, 16 July 2003:
3401 - add MPC86xADS support (uses MPC86xADS.h)
3402 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3404 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3405 o don't trust gclk() software measurement by default, depend on
3406 CONFIG_8xx_GCLK_FREQ
3407 - add DRAM SIMM not installed detection
3408 - use more "correct" SDRAM initialization sequence
3409 - allow different SDRAM sizes (8xxADS has 8M)
3411 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3412 - rename MAMR/MBMR defines to be more consistent. Should eventually
3413 be merged into MxMR to better reflect the PowerQUICC datasheet.
3415 * Patch by Yuli Barcohen, 16 Jul 2003:
3416 support new Motorola PQ2FADS-ZU evaluation board which replaced
3417 MPC8260ADS and MPC8266ADS
3419 ======================================================================
3420 Changes for U-Boot 0.4.4:
3421 ======================================================================
3423 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3425 * Add support for MGT5100 and MPC5200 processors
3427 * Patch by Lutz Dennig, 15 Jul 2003:
3428 update for R360MPI board
3430 ======================================================================
3431 Changes for U-Boot 0.4.3:
3432 ======================================================================
3434 * Patches by Kshitij, 04 Jul 2003
3435 - added support for arm925t cpu core
3436 - added support for TI OMAP 1510 Innovator Board
3438 * Patches by Martin Krause, 14 Jul 2003:
3439 - add I2C support for s3c2400 systems (trab board)
3440 - (re-) add "ping" to command table
3442 * Fix handling of "slow" POST routines
3444 * Patches by Yuli Barcohen, 13 Jul 2003:
3445 - Correct flash and JFFS2 support for MPC8260ADS
3446 - fix PVR values and clock generation for PowerQUICC II family
3449 * Patch by Bernhard Kuhn, 08 Jul 2003:
3450 - add support for M68K targets
3452 * Patch by Ken Chou, 3 Jul:
3453 - Fix PCI config table for A3000
3454 - Fix iobase for natsemi.c
3455 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
3457 * Allow to enable "slow" POST routines by key press on power-on
3458 * Fix temperature dependend switching of LCD backlight on LWMON
3459 * Tweak output format for LWMON
3461 * Patch by Stefan Roese, 11 Jul 2003:
3462 - Fix bug in CONFIG_VERSION_VARIABLE.
3463 - AR405 config updated.
3464 - OCRTC/ORSG: bsp command added.
3465 - ASH405 bsp update.
3467 ======================================================================
3468 Changes for U-Boot 0.4.2:
3469 ======================================================================
3471 * Add support for NSCU board
3473 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3475 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3476 mirror bit flash on TQM8xxM modules
3478 * Patch by Kenneth Johansson, 30 Jun 2003:
3479 get rid of MK_CMD_ENTRY macro; update doc/README.command
3481 * Patch by Seb James, 30 Jun 2003:
3482 Improve documentation of I2C configuration in README
3484 * Fix problems with previous log buffer "fixes"
3486 * Fix minor help text issues
3488 * "log append" did not append a newline
3490 ======================================================================
3491 Changes for U-Boot 0.4.1:
3492 ======================================================================
3494 * Fix some missing commands, cleanup header files
3495 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3497 * Rewrite command lookup and help command (fix problems with bubble
3498 sort when sorting command name list). Minor cleanup here and there.
3500 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3501 - Allow to call sysmon function interactively
3502 - PIC on LWMON board needs delay after power-on
3503 - Add missing RSR definitions for MPC8xx
3504 - Improve log buffer handling: guarantee clean reset after power-on
3505 - Add support for EXBITGEN board (aka "genie")
3506 - Add support for SL8245 board
3509 - remove trailing white space, trailing empty lines, C++ comments, etc.
3510 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3512 * Patches by Kenneth Johansson, 25 Jun 2003:
3513 - major rework of command structure
3514 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3516 ======================================================================
3517 Changes for U-Boot 0.4.0:
3518 ======================================================================
3520 * Patches by Robert Schwebel, 26 Jun 2003:
3521 - csb226 configuration updated
3522 - credits for logodl port updated
3523 - innokom configuration updated
3524 - logodl tree update, still with coding style inconsistencies
3525 - added OCM for ppc405 warning to README
3527 * Patch by Pantelis Antoniou, 25 Jun 2003:
3528 update NetVia with V2 board support
3530 * Header file cleanup for ARM
3532 * Patch by Murray Jensen, 24 Jun 2003:
3533 - make sure to use only U-boot provided header files
3534 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3536 * Patch by Stefan Roese, 24 Jun 2003:
3537 - Update esd ASH405 board files.
3538 - Update esd DASA_SIM config file.
3539 - Add ping command to some esd boards.
3541 * Patch by Yuli Barcohen, 23 Jun 2003:
3542 Update for MPC8260ADS board
3544 * Patch by Murray Jensen, 23 Jun 2003:
3545 - cleanup of GCC 3.x compiler warnings
3547 * Patch by Rune Torgersen, 4 Jun 2003:
3548 add large memory support for MPC8266ADS board
3550 * Patch by Richard Woodruff, 19 June 03:
3551 - Enabled standard u-boot device abstraction for ARM
3552 - Enabled console device for ARM
3553 - Initilized bi_baudrate for ARM
3555 * Patch by Bill Hargen, 23 Apr 2003:
3556 fix byte order for 824x I2C addresses (write op)
3558 * Patch by Murray Jensen, 20 Jun 2003:
3560 - cleanup (especially for gcc-3.x compilers)
3562 * Patch by Tom Guilliams, 20 Jun 2003:
3563 added CONFIG_750FX support for IBM 750FX processors
3565 * Patch by Devin Crumb, 02 Apr 2003:
3566 Fix clock divider rounding problem in drivers/serial.c
3568 * Patch by Richard Woodruff, 19 June 03:
3569 - Fixed smc91c111 driver to sync with the u-boot environment
3570 (driver/smc91c111.c).
3571 - Added eth_init error return check in NetLoop (net/net.c).
3573 * Patch by Ken Chou, 19 June 2003:
3574 Added support for A3000 SBC board (Artis Microsystems Inc.)
3576 * Patches by Murray Jensen, 17 Jun 2003:
3577 - Hymod board database mods: add "who" field and new xilinx chip types
3578 - provide new "init_cmd_timeout()" function so code external to
3579 "common/main.c" can use the "reset_cmd_timeout()" function before
3580 entering the main loop
3581 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3582 slightly different. see include/configs/hymod.h for an example
3583 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3584 CFG_DTT_ADM1021 defined)
3585 - add new "eeprom_probe()" function which has similar args and
3586 behaves in a similar way to "eeprom_read()" etc.
3587 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3588 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3589 - gdbtools copyright update
3590 - ensure that set_msr() executes the "sync" and "isync" instructions
3591 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3592 - 8260 I/O ports fix: Open Drain should be set last when configuring
3593 - add SIU IRQ defines for 8260
3594 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3595 config.mk to allow board configurations to override the GNU
3596 linker script, selected via the LDSCRIPT, make variable, and to
3597 give an initial value to the OBJCFLAGS make variable
3598 - 8260 i2c enhancement:
3599 o correctly extends the timeout depending on the size of all
3600 queued messages for both transmit and receive
3601 o will not continue with receive if transmit times out
3602 o ensures that the error callback is done for all queued tx
3604 o correctly detects both tx and rx timeouts, only delivers one to
3605 the callback, and does not overwrite an earlier error
3606 o logic in i2c_probe now correct
3607 - add "vprintf()" function so that "panic()" function can be
3609 - many Hymod board changes
3611 * Patches by Robert Schwebel, 14 Jun 2003:
3612 - add support for Logotronic DL datalogger board
3613 - cleanup serial line after kermit binary download
3614 - add debugX macro (debug level support)
3615 - update mach-types.h to latest arm.linux.org.uk master list.
3617 * Patches by David Müller, 12 Jun 2003:
3618 - rewrite of the S3C24X0 register definitions stuff
3619 - "driver" for the built-in S3C24X0 RTC
3621 * Patches by Yuli Barcohen, 12 Jun 2003:
3622 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3623 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3624 configuration word supplied by FPGA on some MPC8260ADS boards
3626 * Patch by Pantelis Antoniou, 10 Jun 2003:
3627 Unify status LED interface
3629 * Add support for DS12887 RTC; add RTC support for ATC board
3631 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
3632 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3633 - Add Atmel DataFlash support for reading and writing.
3634 - Add possibility to boot a Linux from DataFlash with BOOTM command.
3635 - Add Flash detection on Atmel AT91RM9200DK
3636 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3637 - Replace old Ethernet PHY layer functions
3638 - Change link address
3640 * Patch by Frank Smith, 9 Jun 2003:
3641 use CRIT_EXCEPTION for machine check on 4xx
3643 * Patch by Detlev Zundel, 13 Jun 2003:
3644 added implementation of the "carinfo" command in cmd_immap.c
3646 * Fix CONFIG_NET_MULTI support in include/net.h
3648 * Patches by Kyle Harris, 13 Mar 2003:
3649 - Add FAT partition support
3650 - Add command support for FAT
3651 - Add command support for MMC
3653 - Add Intel PXA support for video
3654 - Add Intel PXA support for MMC
3656 - Enable MMC and FAT for lubbock board
3657 - Other misc changes for lubbock board
3659 * Patch by Robert Schwebel, April 02, 2003:
3660 fix for SMSC91111 driver
3662 * Patch by Vladimir Gurevich, 04 Jun 2003:
3663 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3665 * Patch by Stefan Roese, 05 Jun 2003:
3666 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3667 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3668 data cache can be used even if the chip select is in use.
3669 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3670 (see README for further description).
3671 - Changed config files of CONFIG_EEPRO100 boards to use the
3672 CFG_RX_ETH_BUFFER define.
3674 * Add support for RMU board
3676 * Add support for TQM862L at 100/50 MHz
3678 * Patch by Pantelis Antoniou, 02 Jun 2003:
3679 major reconstruction of networking code;
3680 add "ping" support (outgoing only!)
3682 * Patch by Denis Peter, 04 June 2003:
3683 add support for the MIP405T board
3685 * Patches by Udi Finkelstein, 2 June 2003:
3686 - Added support for custom keyboards, initialized by defining a
3687 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3688 - Added support for the RBC823 board.
3689 - cpu/mpc8xx/lcd.c now automatically calculates the
3690 Horizontal Pixel Count field.
3692 * Fix alignment problem in BOOTP (dhcp_leasetime option)
3693 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3695 * Patch by Mark Rakes, 14 May 2003:
3696 add support for Intel e1000 gig cards.
3698 * Patch by Nye Liu, 3 Jun 2003:
3699 fix critical typo in MAMR definition (include/mpc8xx.h)
3701 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
3703 * Patch by Klaus Heydeck, 2 Jun 2003
3704 Minor changes for KUP4K configuration
3706 * Patch by Marc Singer, 29 May 2003:
3707 Fixed rarp boot method for IA32 and other little-endian CPUs.
3709 * Patch by Marc Singer, 28 May 2003:
3710 Added port I/O commands.
3712 * Patch by Matthew McClintock, 28 May 2003
3713 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
3714 - minor patches for utx8245
3716 * Patch by Daniel Engström, 28 May 2003:
3719 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
3720 add nand flash support to SXNI855T configuration
3721 fix/extend nand flash support:
3722 - fix 'nand erase' command so does not erase bad blocks
3723 - fix 'nand write' command so does not write to bad blocks
3724 - fix nand_probe() so handles no flash detected properly
3725 - add doc/README.nand
3726 - add .jffs2 and .oob options to nand read/write
3727 - add 'nand bad' command to list bad blocks
3728 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
3729 - make NAND read/write faster
3731 * Patch by Rune Torgersen, 23 May 2003:
3732 Update for MPC8266ADS board
3734 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
3735 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
3736 _time_ (!) if the environment is embedded within the U-Boot image,
3737 or in a separate flash sector.
3739 * Cleanup CFG_DER #defines in config files (wd maintained only)
3741 * Fix data abort exception handling for arm920t CPU
3743 * Fix alignment problems with flash driver for TRAB board
3745 * Patch by Donald White, 21 May 2003:
3746 fix calculation of base address in pci_hose_config_device()
3748 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
3749 execute "cmd2", even if "cmd1" fails. Note that this is different
3750 to "run var1 var2" where the contents of "var2" will NOT be
3751 executed when a command in "var1" fails.
3753 * Add zero-copy ramdisk support (requires corresponding kernel support!)
3755 * Patch by Kyle Harris, 20 May 2003:
3756 In preparation for an ixp port, rename cpu/xscale and arch-xscale
3757 into cpu/pxa and arch-pxa.
3759 * Patch by Stefan Roese, 23 May 2003:
3760 - IBM PPC405EP port added.
3761 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
3762 UART0) is used as default U-Boot console. PPC4xx only!
3763 - esd ASH405 board added (PPC405EP based).
3764 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
3765 - esd CPCI405AB board added.
3766 - esd PMC405 board added.
3767 - Update of some esd boards.
3769 * Patch by Denis Peter, 19 Mai 2003:
3770 add support for the MIP405-3 board
3772 * Patch by Dave Ellis, 22 May 2003:
3773 Fix problem with only partially cleared .bss segment
3775 * Patch by Rune Torgersen, 12 May 2003:
3776 get PCI to work on a MPC8266ADS board; incorporate change to
3777 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
3779 * Patch by Nye Liu, 1 May 2003:
3780 minor patches for the FADS8xx
3782 * Patch by Thomas Schäfer, 28 Apr 2003:
3783 Fix SPD handling for 256 ECC DIMM on Walnut
3785 * Add support for arbitrary bitmaps for TRAB's VFD command;
3786 allow to pass boot bitmap addresses in environment variables;
3787 allow for zero boot delay
3789 * Patch by Christian Geißinger, 19 May 2002:
3790 On TRAB: wait until the dummy byte has been completely sent
3792 * Patch by David Updegraff, 22 Apr 2003:
3793 update for CrayL1 board
3795 * Patch by Pantelis Antoniou, 21 Apr 2003:
3796 add boot support for ARTOS (a proprietary OS)
3798 * Patch by Steven Scholz, 11 Apr 2003:
3799 Add support for RTC DS1338
3801 * Patch by Rod Boyce, 24 Jan 2003:
3802 Fix counting of extended partitions in diskboot command
3804 * Patch by Christophe Lindheimer, 20 May 2003:
3805 allow the use of CFG_LOADS when CFG_NO_FLASH is set
3807 * Fix SDRAM timing on Purple board
3809 * Add support for CompactFlash on ATC board
3810 (includes support for Intel 82365 and compatible PC Card controllers,
3811 and Yenta-compatible PCI-to-CardBus controllers)
3813 * Patch by Mathijs Haarman, 08 May 2003:
3814 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
3816 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
3818 * Add support for Promess ATC board
3820 * Patch by Keith Outwater, 28 Apr 2003:
3821 - Miscellaneous corrections and additions to GEN860T board specific code.
3822 - Added GEN860_SC variant to GEN860T.
3823 - Miscellaneous corrections to GEN860T documentation.
3824 - Correct duplicate entry in U-Boot CREDITS file.
3825 - Add GEN860T_SC entry in MAINTAINERS file.
3826 - Update CREDITS file with GEN860T_SC info.
3828 * Update Smiths Aerospace addresses in MAINTAINERS file
3830 * Fix error handling in hush's version of "run" command
3833 - Splashscreen support
3836 - temperature dependend enabling of LCD
3838 * Allow booting from old "PPCBoot" disk partitions
3840 * Add support for TQM8255 Board / MPC8255 CPU
3842 ======================================================================
3843 Changes for U-Boot 0.3.1:
3844 ======================================================================
3846 * Make sure Block Lock Bits get cleared in R360MPI flash driver
3848 * MPC823 LCD driver: Fill color map backwards, to allow for steady
3849 display when Linux takes over
3851 * Patch by Erwin Rol, 27 Feb 2003:
3852 Add support for RTEMS (this time for real).
3854 * Add support for "bmp info" and "bmp display" commands to load
3855 bitmap images; this can be used (for example in a "preboot"
3856 command) to display a splash screen very quickly after poweron.
3858 * Add support for 133 MHz clock on INCA-IP board
3860 * Patch by Lutz Dennig, 10 Apr 2003:
3861 Update for R360MPI board
3863 * Add new meaning to "autostart" environment variable:
3864 If set to "no", a standalone image passed to the
3865 "bootm" command will be copied to the load address
3866 (and eventually uncompressed), but NOT be started.
3867 This can be used to load and uncompress arbitrary
3870 * Patch by Stefan Roese, 10 Apr 2003:
3871 Changed DHCP client to use IP address from server option field #54
3872 from the OFFER packet in the server option field #54 in the REQUEST
3873 packet. This fixes a problem using a Windows 2000 DHCP server,
3874 where the DHCP-server is not the TFTP-server.
3876 * Set max brightness for MN11236 displays on TRAB board
3878 * Add support for TQM862L modules
3880 ======================================================================
3881 Changes for U-Boot 0.3.0:
3882 ======================================================================
3884 * Patch by Arun Dharankar, 4 Apr 2003:
3885 Add IDMA example code (tested on 8260 only)
3887 * Add support for Purple Board (MIPS64 5Kc)
3889 * Add support for MIPS64 5Kc CPUs
3891 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
3893 * Patch by Denis Peter, 04 Apr 2003:
3894 - update MIP405-4 board
3896 * Patch by Stefan Roese, 4 Apr 2003:
3897 - U-Boot version environment variable "ver" added
3898 (CONFIG_VERSION_VARIABLE).
3899 - Changed PPC405GPr version from A to B.
3900 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
3902 * Patches by Denis Peter, 03 April 2003:
3903 - fix PCI IRQs on MPL boards
3904 - fix two more un-relocated pointer problems
3906 * Fix behaviour of "run" command:
3907 - print error message iv variable does not exist
3908 - terminate processing of arguments in case of error
3910 * Patches by Peter Figuli, 10 Mar 2003
3911 - Add support for BTUART on PXA platform
3912 - Add support for WEP EP250 (PXA) board
3914 * Fix flash problems on INCA-IP; add tool to allow bruning images to
3915 flash using a BDI2000
3917 * Implement fix for I2C Edge Conditions problem for all boards that
3918 use the bit-banging driver (common/soft_i2c.c)
3920 * Patch by Martin Winistoerfer, 23 Mar 2003
3921 - Add port to MPC555/556 microcontrollers
3922 - Add support for cmi customer board with
3923 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
3925 * Patch by Rick Bronson, 28 Mar 2003:
3926 - fix common/cmd_nand.c
3928 * Patch by Arun Dharankar, 24 Mar 2003:
3929 - add threads / scheduler example code
3931 * Add patches by Robert Schwebel, 31 Mar 2003:
3932 - add ctrl-c support for kermit download
3933 - align bdinfo output on ARM
3934 - csb226 board: bring in sync with innokom/memsetup.S
3935 - csb226 board: fix MDREFR handling
3936 - misc doc fixes / extensions
3937 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
3938 - add BOOT_PROGRESS to armlinux.c
3940 * Add CPU ID, version, and clock speed for INCA-IP
3942 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
3943 - fix SRAM and SDRAM memory sizing
3944 - add status LED support
3945 - add MAC address for second (SCC1) ethernet port
3947 * Update default environment for TQM8260 board
3949 * Patch by Rick Bronson, 16 Mar 2003:
3950 - Add NAND flash support for reading, writing, and erasing NAND
3951 flash (certain forms of which are called SmartMedia).
3952 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
3954 * Patches by Robert Schwebel, 19 Mar 2003:
3955 - use arm-linux-gcc as default compiler for ARM
3956 - fix i2c fixup code
3957 - fix missing baudrate setting
3958 - added $loadaddr / CFG_LOAD_ADDR support to loadb
3959 - moved "ignoring trailing characters" _before_ u-boot wants to
3960 print out diagnostics messages; removes bogus characters at the
3963 * Patch by John Zhan, 18 Mar 2003:
3964 Add support for SinoVee Microsystems SC8xx boards
3966 * Patch by Rolf Offermanns, 21 Mar 2003:
3967 ported the dnp1110 related changes from the current armboot cvs to
3968 current u-boot cvs. smc91111 does not work. problem marked in
3969 smc91111.c, grep for "FIXME".
3971 * Patch by Brian Auld, 25 Mar 2003:
3972 Add support for STM flash chips on ebony board
3974 * Add PCI support for MPC8250 Boards (PM825 module)
3976 * Patch by Stefan Roese, 25 Mar 2003:
3979 * Patch by Stefan Roese, 20 Mar 2003:
3980 - CPCI4052 update (support for revision 3).
3981 - Set edge conditioning circuitry on PPC405GPr for compatibility
3982 to existing PPC405GP designs.
3983 - Clip udiv to 5 bits on PPC405 (serial.c).
3985 * Extend INCAIP board support:
3986 - add automatic RAM size detection
3987 - add "bdinfo" command
3988 - pass flash address and size to Linux kernel
3989 - switch to 150 MHz clock
3991 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
3992 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
3993 boards, version 153 for Rev. 200 boards).
3995 * Patch by Vladimir Gurevich, 12 Mar 2003:
3996 Fix relocation problem of statically initialized string pointers
3999 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
4000 Cleanup & bug fixes for JFFS2 code:
4001 - the memory mangement was broken. It caused havoc on malloc by
4002 writing beyond the block boundaries.
4003 - the length calculation for files was wrong, sometimes resulting
4004 in short file reads.
4005 - data copying now optionally takes fragment version numbers into
4006 account, to avoid copying from older data.
4007 See doc/README.JFFS2 for details.
4009 * Patch by Josef Wagner, 12 Mar 2003:
4010 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4011 - ETH05 and BEDBUG support for CU824
4012 - added support for MicroSys CPC45
4013 - new BOOTROM/FLASH0 and DOC base for PM826
4015 * Patch by Robert Schwebel, 12 Mar 2003:
4016 Fix the chpart command on innokom board
4019 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4020 s/PPCBoot/U-Boot/ in some files
4021 s/pImage/uImage/ in some files
4023 * Patch by Detlev Zundel, 15 Jan 2003:
4024 Fix '' command line quoting
4026 * Patch by The LEOX team, 19 Jan 2003:
4027 - add support for the ELPT860 board
4028 - add support for Dallas ds164x RTC
4030 * Patches by David Müller, 31 Jan 2003:
4031 - minimal setup for CardBus bridges
4032 - add EEPROM read/write support in the CS8900 driver
4033 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
4034 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
4036 * Patch by Steven Scholz, 04 Feb 2003:
4037 add support for RTC DS1307
4039 * Patch by Reinhard Meyer, 5 Feb 2003:
4040 fix PLPRCR/SCCR init sequence on 8xx to allow for
4041 changes of EBDF by software
4043 * Patch by Vladimir Gurevich, 07 Feb 2003:
4044 "API-compatibility patch" for 4xx I2C driver
4046 * TRAB fixes / extensions:
4047 - Restore VFD brightness as saved in environment
4048 - add support for Fujitsu flashes
4049 - make sure both buzzers are turned off (drive low level)
4051 * Patches by Robert Schwebel, 06 Mar 2003:
4052 - fix bug in BOOTP code (must use NetCopyIP)
4053 - update of CSB226 port
4054 - clear BSS segment on XScale
4055 - added support for i2c_init_board() function
4056 - update to the Innokom plattform
4058 * Extend support for redundand environments for configurations where
4059 environment size < sector size
4061 * Patch by Rune Torgersen, 13 Feb 2003:
4062 Add support for Motorola MPC8266ADS board
4064 * Patch by Kyle Harris, 19 Feb 2003:
4065 patches for the Intel lubbock board:
4066 memsetup.S - general cleanup (based on Robert's csb226 code)
4067 flash.c - overhaul, actually works now
4068 lubbock.c - fix init funcs to return proper value
4070 * Patch by Kenneth Johansson, 26 Feb 2003:
4071 - Fixed off by one in RFTA calculation.
4072 - No need to abort when LDF is lower than we can program it's only
4073 minimum timing so clamp it to what we can do.
4074 - Takes function pointer to function for reading the spd_nvram. Usefull
4075 for faking data or hardcode a module without the nvram.
4076 - fix other user for above change
4077 - fix some comments.
4079 * Patches by Brian Waite, 26 Feb 2003:
4080 - fix port for evb64260 board
4081 - fix PCI for evb64260 board
4084 * Patch by Reinhard Meyer, 1 Mar 2003:
4085 Add support for EMK TOP860 Module
4087 * Patch by Yuli Barcohen, 02 Mar 2003:
4088 Add SPD EEPROM support for MPC8260ADS board
4090 * Patch by Robert Schwebel, 21 Jan 2003:
4091 - Add support for Innokom board
4092 - Don't complain if "install" fails
4093 - README cleanup (remove duplicated lines)
4094 - Update PXA header files
4096 * Add documentation for existing POST code (doc/README.POST)
4098 * Patch by Laudney Ren, 15 Jan 2003:
4099 Fix handling of redundand environment in "tools/envcrc.c"
4101 * Patch by Detlev Zundel, 28 Feb 2003:
4102 Add bedbug support for 824x systems
4104 * Add support for 16 MB flash configuration of TRAB board
4106 * Patch by Erwin Rol, 27 Feb 2003:
4107 Add support for RTEMS
4109 * Add image information to README
4111 * Patch by Stefan Roese, 18 Feb 2003:
4112 CPCIISER4 configuration updated.
4114 * Patch by Stefan Roese, 17 Feb 2003:
4115 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4117 * Patch by Stefan Roese, 13 Feb 2003:
4118 Add "pcidelay" environment variable (in ms, enabled via
4119 CONFIG_PCI_BOOTDELAY).
4120 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4121 RST# to respond to configuration cycles (33MHz -> 1s).
4123 * Fix dual PCMCIA slot support (when running with just one
4126 * Add VFD type detection to trab board
4128 * extend drivers/cs8900.c driver to synchronize ethaddr environment
4129 variable with value in the EEPROM
4131 * Patch by Stefan Roese, 10 Feb 2003:
4132 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4134 * Add support for MIPS32 4Kc CPUs
4136 * Add support for INCA-IP Board
4138 ======================================================================
4139 Changes for U-Boot 0.2.2:
4140 ======================================================================
4142 * Add dual ethernet support on PM826
4144 * Add support for LXT971 PHY on PM826
4146 * Patch by Tord Andersson, 16 Jan 2003:
4147 Fix flash sector count for TQM8xxL
4149 * Fix I2C EEPROM problem on ICU862 board (would only write the first
4150 16 bytes out of each 32 byte block)
4152 ======================================================================
4153 Changes for U-Boot 0.2.1:
4154 ======================================================================
4156 * Add support for V37 board
4157 (patch by Jón Benediktsson, 11 Dec 2002)
4159 * Update baudrate in bd_info when it gets changed
4161 * Add watchdog trigger points while waiting for serial port
4162 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4164 * Improve command line tool to access the U-Boot's environment
4165 (figuration of the utility, using a config file)
4167 * Add single quote support for (old) command line parser
4169 * Switch LWMON board default config from FRAM to EEPROM;
4170 in POST, EEPROM shows up on 8 addresses
4172 ======================================================================
4173 Changes for U-Boot 0.2.0:
4174 ======================================================================
4176 * Use 1-byte-read instead of -write for iprobe() function
4177 Add i2c commands to PM826 config
4179 * extend I2C POST code: check for list on known addresses
4181 * Improve log buffer code; use "loglevel" to decide which messages
4182 to log on the console, too (like in Linux); get rid of "logstart"
4184 * Add command line tool to access the U-Boot's environment
4185 (board-specific for TRAB now, to be fixed later)
4187 * Patch by Hans-Joerg Frieden, 06 Dec 2002
4188 Fix misc problems with AmigaOne support
4190 * Patch by Chris Hallinan, 3 Dec 2002:
4191 minor cleanup to the MPC8245 EPIC driver
4193 * Patch by Pierre Aubert , 28 Nov 2002
4194 Add support for external (SIU) interrupts on MPC8xx
4196 * Patch by Pierre Aubert , 28 Nov 2002
4197 Fix nested syscalls bug in standalone applications
4199 * Patch by David Müller, 27 Nov 2002:
4200 fix output of "pciinfo" command for CardBus bridge devices.
4202 * Fix bug in TQM8260 board detection - boards got stuck when board ID
4205 * Add LED indication for IDE activity on KUP4K board
4207 * Fix startup problems with VFD display on TRAB
4209 * Patch by Pierre Aubert, 20 Nov 2002
4210 Add driver for Epson SED13806 graphic controller.
4211 Add support for BMP logos in cfb_console driver.
4213 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
4215 * Patch by Rod Boyce, 21 Nov 2002:
4216 fix PCMCIA on MBX8xx board
4218 * Patch by Pierre Aubert , 21 Nov 2002
4219 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4220 bootmode word in DPRAM configurable
4222 * Patch by Daniel Engström, 18 Nov 2002:
4223 Fixes for x86 port (mostly strings issues)
4225 * Patch by Ken Chou, 18 Nov 2002:
4226 Fix for natsemi NIC cards (DP83815)
4228 * Patch by Pierre Aubert, 19 Nov 2002:
4229 fix a bug for the MII configuration, and some warnings
4231 * Patch by Thomas Frieden, 13 Nov 2002:
4232 Add code for AmigaOne board
4233 (preliminary merge to U-Boot, still WIP)
4235 * Patch by Jon Diekema, 12 Nov 2002:
4236 - Adding URL for IEEE OUI lookup
4237 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4239 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4240 root-on-nfs macros are designed to switch how the default boot
4241 method gets defined.
4243 * Patch by Daniel Engström, 13 Nov 2002:
4244 Add support for i386 architecture and AMD SC520 board
4246 * Patch by Pierre Aubert, 12 Nov 2002:
4247 Add support for DOS filesystem and booting from DOS floppy disk
4249 * Patch by Jim Sandoz, 07 Nov 2002:
4250 Increase number of network RX buffers (PKTBUFSRX in
4251 "include/net.h") for EEPRO100 based boards (especially SP8240)
4252 which showed "Receiver is not ready" errors when U-Boot was
4253 processing the receive buffers slower than the network controller
4256 * Patch by Andreas Oberritter, 09 Nov 2002:
4257 Change behaviour of NetLoop(): return -1 for errors, filesize
4258 otherwise; return code 0 is valid an means no file loaded - in this
4259 case the environment still gets updated!
4261 * Patches by Jon Diekema, 9 Nov 2002:
4262 - improve ADC/DAC clocking on the SACSng board to align
4263 the failing edges of LRCLK and SCLK
4264 - sbc8260 configuration tweaks
4265 - add status LED support for 82xx systems
4266 - wire sspi/sspo commands into command handler; improved error
4268 - add timestamp support and alternate memory test to the
4269 SACSng configuration
4271 * Patch by Vince Husovsky, 7 Nov 2002:
4272 Add "-n" to linker options to get rid of "Not enough room for
4273 program headers" problem
4275 * Patch by David Müller, 05 Nov 2002
4276 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4277 so we can use an already existing name
4279 * Patch by Pierre Aubert, 05 Nov 2002
4280 Hardware relatied improvments in FDC boot code
4282 * Patch by Holger Schurig, 5 Nov 2002:
4283 Make the PXA really change it's frequency
4285 * Patch by Pierre Aubert, 05 Nov 2002
4286 Add support for slave serial Spartan 2 FPGAs
4288 * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4291 * Add support for log buffer which can be passed to Linux kernel's
4292 syslog mechanism; used especially for POST results.
4294 * Patch by Klaus Heydeck, 31 Oct 2002:
4295 Add initial support for kup4k board
4297 * Patch by Robert Schwebel, 04 Nov 2002:
4298 - use watchdog to reset PXA250 systems
4299 - added progress callbacks to (some of the) ARM code
4300 - update for Cogent CSB226 board
4302 * Add support for FPS860 board
4304 * Patch by Guillaume Alexandre,, 04 Nov 2002:
4305 Improve PCI access on 32-bits Compact PCI bus
4307 * Fix mdelay() on TRAB - this was still the debugging version with
4308 seconds instead of ms.
4310 * Patch by Robert Schwebel, 1 Nov 2002:
4311 XScale related cleanup (affects all ARM boards)
4313 * Cleanup of names and README.
4315 ======================================================================
4316 Notes for U-Boot 0.1.0:
4317 ======================================================================
4319 This is the initial version of "Das U-Boot", the Universal Boot Loader.
4321 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4322 For information about the history of the project please see the
4323 PPCBoot project page at http://sourceforge.net/projects/ppcboot
4325 ======================================================================