1 commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31
2 Author: Jerry Van Baren <gvb.uboot@gmail.com>
3 Date: Fri Mar 13 11:40:10 2009 -0400
5 mpc83xx: Add bank configuration to FSL spd_sdram.c
7 The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
10 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11 Acked-by: Dave Liu <daveliu@freescale.com>
12 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14 commit b581626c1e2474a3dadf69d4f0e0582eccbc4235
15 Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
16 Date: Fri Mar 13 08:58:14 2009 +0100
18 mpc83xx: correctly set encryption and I2C bus 0 clock
20 This patch makes sure the correct mask is applied when setting
21 the encryption and I2C bus 0 clock in SCCR.
22 Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
25 Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
26 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28 commit e6a6a704151c2d7e4a7b485545b48a6020ccca17
29 Author: Dirk Behme <dirk.behme@googlemail.com>
30 Date: Thu Mar 12 19:30:50 2009 +0100
32 OMAP3: Add support for OMAP3 die ID
34 Read and store OMAP3 die ID in U-Boot environment.
36 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
38 commit f949bd8d089ec3059c460ac829c0d919e1d7af0e
39 Author: Jon Smirl <jonsmirl@gmail.com>
40 Date: Wed Mar 11 15:08:56 2009 -0400
42 MPC5200 FEC MII speed register
44 Set a non-zero speed in the MII register so that MII commands will work.
46 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
48 commit 94a353611b93ac4cb4434a5f7e98aa0902da919e
49 Author: Yusuke.Goda <goda.yusuke@renesas.com>
50 Date: Fri Mar 13 16:08:18 2009 +0900
52 sh: ap325rxa: Change the wait cycle in the area 5
54 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
55 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
57 commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac
58 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
59 Date: Wed Feb 25 16:04:26 2009 +0900
61 sh: Fix cannot work rtl8139 on r2dplus
63 The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
66 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
67 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
69 commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f
70 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
71 Date: Fri Feb 27 18:35:41 2009 +0900
73 sh: Add netdev header fixing of warning/build
75 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
76 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
78 commit ada9318252f51c2626e9837c623f9812b0308dea
79 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
80 Date: Tue Mar 3 15:11:17 2009 +0900
82 sh: Add support 32-Bit Extended Address Mode to sh7785lcr
84 We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
85 for this mode. This command changes PMB for using 512MB system memory.
87 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
88 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
90 commit 06b18163b57e6b0349b0c299222d50e7b1e41e50
91 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
92 Date: Wed Feb 25 14:26:42 2009 +0900
94 sh: Add some register value configurable to PCI of SH7780
96 Some register value was hardcoded for System memory size 128MB and
97 memory offset 0x08000000. This patch fixed the problem.
99 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
100 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
102 commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c
103 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
104 Date: Wed Feb 25 14:26:52 2009 +0900
106 sh: Add system memory registration to PCI for SH4
108 It is necessary for some pci device driver.
110 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
111 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
113 commit b3061b40db691245a7bb9a55354b4edacbf3902d
114 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
115 Date: Wed Feb 25 14:26:55 2009 +0900
117 sh: Add value for PCI system memory registration of sh7785lcr
119 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
120 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
122 commit 6d84ae3956a6cd7aebd86f661130752594e60124
123 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
124 Date: Tue Mar 3 15:11:08 2009 +0900
126 sh: Add macros for SH-4A 32-Bit Address Extended Mode
128 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
129 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
131 commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1
132 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
133 Date: Tue Feb 3 13:35:05 2009 +0900
135 sh: use write{8,16,32} in ms7720se lowlevel_init
137 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
138 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
140 commit 0452352df118bc9dd684a056aaaa5fb4aed1178a
141 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
142 Date: Mon Mar 9 18:07:53 2009 -0500
144 tsec: report when there is no vendor specific PHY support
146 Commit af1c2b84 added a generic phy support, with an ID of zero
147 and a 32 bit mask; meaning that it will match on any PHY ID.
149 The problem is that there is a test that checked if a matching
150 PHY was found, and if not, it printed the non-matching ID.
151 But since there will always be a match (on the generic PHY,
152 worst case), this test will never trip.
154 In the case of a misconfigured PHY address, or of a PHY that
155 isn't explicitly supported outside of the generic support,
156 you will never see the ID of 0xffffffff, or the ID of the
157 real (but unsupported) chip. It will silently fall through
158 onto the generic support.
160 This change makes that test useful again, and ensures that
161 the selection of generic PHY support doesn't happen without
162 some sort of notice. It also makes it explicitly clear that
163 the generic PHY must be last in the PHY table.
165 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
166 Acked-by: Andy Fleming <afleming@freescale.com>
168 commit c279dfc10186ceba78d3862036f158750e86599a
169 Author: Wolfgang Denk <wd@denx.de>
170 Date: Mon Mar 9 10:53:05 2009 +0100
172 SIMPC8313 board: fix out of tree building.
174 Fix typo in makefile which broke out of tree builds.
176 Also use expolicit "rm" instead of "ln -sf" which is known to be
179 Signed-off-by: Wolfgang Denk <wd@denx.de>
180 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
182 commit 49b5aff491bd574935ecaf8545152066a25eff3d
183 Author: ksi@koi8.net <ksi@koi8.net>
184 Date: Mon Feb 23 10:53:13 2009 -0800
186 Add eTSEC 1/2 IO override control (corrected)
188 This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)
190 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
192 commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc
193 Author: Andy Fleming <afleming@freescale.com>
194 Date: Fri Mar 6 19:05:52 2009 -0600
196 fsl: Remove unnecessary debug printfs
198 These were left in accidentally, and are not really useful unless the
199 code is as broken as it was when it was being developed.
201 Signed-off-by: Andy Fleming <afleming@freescale.com>
203 commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0
204 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
205 Date: Tue Feb 24 02:37:59 2009 -0600
207 Fix mpc85xx ddr-gen3 ddr_sdram_cfg.
209 Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
210 sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.
212 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
214 commit a922fdb87af25c25c032424908dcf60fbf3250ea
215 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
216 Date: Tue Feb 24 06:13:10 2009 +0100
218 PXA: timer use do_div and simplify it
220 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
222 commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3
223 Author: Wolfgang Denk <wd@denx.de>
224 Date: Mon Mar 9 10:51:39 2009 +0100
226 SIMPC8313 board: fix out of tree building.
228 Fix typo in makefile which broke out of tree builds.
230 Also use expolicit "rm" instead of "ln -sf" which is known to be
233 Signed-off-by: Wolfgang Denk <wd@denx.de>
235 commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a
236 Author: Heiko Schocher <hs@denx.de>
237 Date: Tue Feb 24 11:30:51 2009 +0100
239 8360, kmeter1: added bootcount feature.
241 add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.
243 The bootcounter uses 8 bytes from the muram,
244 because no other memory was found on this
245 CPU for the bootcount feature. So we must
246 correct the muram size in DTS before booting
249 This feature is actual only implemented for
250 MPC8360, because not all 83xx CPU have qe,
251 and therefore no muram, which this feature
254 Signed-off-by: Heiko Schocher <hs@denx.de>
255 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
257 commit 1e7ed2565031e01abc18c713030a0a9829c07684
258 Author: Heiko Schocher <hs@denx.de>
259 Date: Tue Feb 24 11:30:48 2009 +0100
261 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
263 old code implemented the QE_ENET10 errata only for Silicon
264 Revision 2.0. New code reads now the Silicon Revision
265 register and sets dependend on the Silicon Revision the
266 values as advised in the QE_ENET10 errata.
268 Signed-off-by: Heiko Schocher <hs@denx.de>
269 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
271 commit 605f78e34a3f0103693b891f2573edd352e7d495
272 Author: Heiko Schocher <hs@denx.de>
273 Date: Tue Feb 24 11:30:44 2009 +0100
275 83xx, kmeter1: updates for 2009.03
278 HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
279 HRCWH_LALE_EARLY added
280 - DDR-SDRAM settings modified. This solves sporadically
281 problems with this memory.
282 - CS1 now 128 MB window size
283 - CS3 now 512 MB window size
285 - MTDPARTS_DEFAULT defined
286 - CONFIG_HOSTNAME added
287 - MONITOR_LEN now 384 KB
289 Signed-off-by: Heiko Schocher <hs@denx.de>
290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
292 commit 118cbe3c35c898f8d020b29d6dc180307cacf147
293 Author: Heiko Schocher <hs@denx.de>
294 Date: Tue Feb 24 11:30:40 2009 +0100
296 83xx, kmeter1: autodetect size of DDR II RAM
298 it is possible that some board variants have different DDR II
299 RAM sizes. So we autodetect the size of the assembled RAM.
301 Signed-off-by: Heiko Schocher <hs@denx.de>
302 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
304 commit c1bce4fff750d734b1fa7467eb08f93902c97ca6
305 Author: Heiko Schocher <hs@denx.de>
306 Date: Tue Feb 24 11:30:37 2009 +0100
308 83xx, i2c: add mux support for fsl_i2c
310 This patch adds I2C mux support for the fsl_i2c driver. This
311 allows you to add "new" i2c busses, which are reached over
312 i2c muxes. For more infos, please look in the README and
313 search for CONFIG_I2C_MUX.
315 Signed-off-by: Heiko Schocher <hs@denx.de>
316 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
318 commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803
319 Author: Heiko Schocher <hs@denx.de>
320 Date: Tue Feb 24 11:30:34 2009 +0100
322 83xx, kmeter1: add I2C, dtt, eeprom support
324 This patch adds I2C support for the Keymile kmeter1 board.
325 It uses the First I2C Controller from the CPU, for
326 accessing 4 temperature sensors, an eeprom with IVM data
327 and the booteeprom over a pca9547 mux.
329 Signed-off-by: Heiko Schocher <hs@denx.de>
330 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
332 commit db1d72afd77287bc8577210f3f71ab249dcf146f
333 Author: Heiko Schocher <hs@denx.de>
334 Date: Tue Feb 24 11:30:30 2009 +0100
336 i2c, dtt: move dtt_init () to board_init_r ()
338 In case where a board not uses CONFIG_POST, it is not
339 necessary to init the DTTs when running from flash.
341 Signed-off-by: Heiko Schocher <hs@denx.de>
342 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
344 commit 5b0055547f0246908b79cc300170d87380b69e18
345 Author: Dave Liu <daveliu@freescale.com>
346 Date: Wed Feb 25 12:31:32 2009 +0800
348 83xx: Fix some bugs in spd sdram code
350 1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
351 tRTP according to DDR2 JEDEC spec.
352 2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
353 3. add the support of DDR2-533,667,800 DIMMs
355 5. make the AL to min to gain better performance.
357 The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
358 MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.
361 Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
363 Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
364 Signed-off-by: Dave Liu <daveliu@freescale.com>
365 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
367 commit b7be63abec45858c044f0fbd6aeef524c4663f9b
368 Author: Valeriy Glushkov <gvv@lstec.com>
369 Date: Wed Feb 4 18:27:49 2009 +0200
371 MPC8349ITX: several config issues fixed
373 The previous version rebooted forever with DDR bigger than 256MB.
374 Access the DS1339 RTC chip is on I2C1 bus.
377 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
378 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
380 commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
381 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
382 Date: Thu Feb 19 18:20:39 2009 +0300
384 mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
386 The SerDes initialization should be finished before negating the reset
387 signal according to the reference manual. This isn't an issue on real
388 hardware, but we'd better stick to the specifications anyway.
390 Suggested-by: Liu Dave <DaveLiu@freescale.com>
391 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
392 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
394 commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f
395 Author: Heiko Schocher <hs@denx.de>
396 Date: Wed Feb 25 12:28:32 2009 +0100
398 i2c, dtt: move dtt_init () to board_init_r ()
400 it is not necessary to init the DTTs so early,
401 so move this init to board_init_r ().
403 Signed-off-by: Heiko Schocher <hs@denx.de>
405 commit 00cc5595a7caac8066b408774383a956c2e26797
406 Author: Anatolij Gustschin <agust@denx.de>
407 Date: Wed Feb 25 20:28:13 2009 +0100
409 lcd: Fix compilation warning in common/lcd.c
411 Fix following warning while compilation for mcc200 board:
413 lcd.c: In function 'lcd_display_bitmap':
414 lcd.c:625: warning: unused variable 'cmap'
416 Signed-off-by: Anatolij Gustschin <agust@denx.de>
418 commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674
419 Author: Graeme Russ <graeme.russ@gmail.com>
420 Date: Tue Feb 24 21:11:24 2009 +1100
422 Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb)
424 Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb
426 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
428 commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215
429 Author: Mike Frysinger <vapier@gentoo.org>
430 Date: Mon Feb 23 10:29:47 2009 -0500
432 smc911x: split out useful defines/functions into local header
434 The smc911x driver has a lot of useful defines/functions which can be used
435 by pieces of code (such as example eeprom programmers). Rather than
436 forcing each place to duplicate these defines/functions, split them out
437 of the smdc911x driver into a local header.
439 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
440 Acked-by: Ben Warren <biggerbadderben@gmail.com>
441 CC: Sascha Hauer <s.hauer@pengutronix.de>
442 CC: Guennadi Liakhovetski <lg@denx.de>
443 CC: Magnus Lilja <lilja.magnus@gmail.com>
444 CC: Ben Warren <biggerbadderben@gmail.com>
446 commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1
447 Author: Guennadi Liakhovetski <lg@denx.de>
448 Date: Tue Feb 24 10:44:02 2009 +0100
450 ARM: add an "eet" variant of the imx31_phycore board
452 The "eet" variant of the imx31_phycore board has an OLED display, using a
453 s6e63d6 display controller on the first SPI interface, using GPIO57 as a
454 chip-select for it. With this configuration you can display 256 colour BMP
455 images in 16-bit RGB (RGB565) LCD mode.
457 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
458 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
460 commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f
461 Author: Guennadi Liakhovetski <lg@denx.de>
462 Date: Fri Feb 6 10:37:57 2009 +0100
464 video: add an i.MX31 framebuffer driver
466 Add a driver for the Synchronous Display Controller and the Display
467 Interface on i.MX31, using IPU for DMA channel setup. So far only
468 displaying of bitmaps is supported, no text output.
470 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
471 Acked-by: Anatolij Gustschin <agust@denx.de>
473 commit b245e65ee3c4cce3ccf008a21f4528239655876c
474 Author: Guennadi Liakhovetski <lg@denx.de>
475 Date: Fri Feb 6 10:37:53 2009 +0100
477 LCD: support 8bpp BMPs on 16bpp displays
479 This patch also simplifies some ifdefs in lcd.c, introduces a generic
480 vidinfo_t, which new drivers are encouraged to use and old drivers to switch
483 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
484 Acked-by: Anatolij Gustschin <agust@denx.de>
486 commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1
487 Author: Mark Jackson <mpfj@mimc.co.uk>
488 Date: Fri Feb 6 10:37:49 2009 +0100
490 Add 16bpp BMP support
492 This patch adds 16bpp BMP support to the common lcd code.
494 Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.
496 At the moment it's only been tested on the MIMC200 AVR32 board, but extending
497 this to other platforms should be a simple task !!
499 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
500 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
501 Acked-by: Anatolij Gustschin <agust@denx.de>
503 commit 689551c5ff1b394b88412f3df22144e79468d3a9
504 Author: Guennadi Liakhovetski <lg@denx.de>
505 Date: Fri Feb 6 10:37:41 2009 +0100
507 A driver for the S6E63D6 SPI display controller from Samsung
509 This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
510 It only provides access to controller's registers so the client can freely
513 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
514 Acked-by: Anatolij Gustschin <agust@denx.de>
516 commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d
517 Author: Guennadi Liakhovetski <lg@denx.de>
518 Date: Fri Feb 13 09:26:40 2009 +0100
520 i.MX31: support GPIO as a chip-select in the mxc_spi driver
522 Some SPI devices have special requirements on chip-select handling.
523 With this patch we can use a GPIO as a chip-select and strictly follow
524 the SPI_XFER_BEGIN and SPI_XFER_END flags.
526 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
527 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
529 commit b30de3cccf8867566cd314e7c7033904afa5dc9d
530 Author: Guennadi Liakhovetski <lg@denx.de>
531 Date: Sat Feb 7 01:18:07 2009 +0100
533 i.MX31: add a simple gpio driver
535 This is a minimal driver, so far only managing output. It will
536 be used by the mxc_spi.c driver.
538 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
539 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
541 commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f
542 Author: Guennadi Liakhovetski <lg@denx.de>
543 Date: Sat Feb 7 00:09:12 2009 +0100
545 i.MX31: fix SPI driver for shorter than 32 bit
547 Fix setting the SPI Control register, 8 and 16-bit transfers
548 and a wrong pointer in the free routine in the mxc_spi driver.
550 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
551 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
553 commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496
554 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
555 Date: Thu Feb 19 18:20:52 2009 +0300
557 mpc83xx: MPC837XERDB: Add PCIe support
559 On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
560 slots. Let's support them.
562 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
563 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
565 commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b
566 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
567 Date: Thu Feb 19 18:20:50 2009 +0300
569 mpc83xx: PCI: Fix hard-coded first_busno value
571 We should use pci_last_busno() in pci_init_bus(), otherwise we'll
572 erroneously re-use PCI0's first_busno for PCI1 hoses.
574 NOTE: The patch is untested. All MPC83xx FSL boards I have have
575 PCI1 in miniPCI form, for which I don't have any cards handy.
577 But looking in cpu/mpc85xx/pci.c:
579 #ifdef CONFIG_MPC85XX_PCI2
582 hose->first_busno = pci_hose[0].last_busno + 1;
584 And considering that we do the same for MPC83xx PCI-E support,
585 I think this patch is correct.
587 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
588 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
590 commit a5878d427128c1a9226045ebe05fbadaa02eb9dd
591 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
592 Date: Thu Feb 19 18:20:46 2009 +0300
594 mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
596 This patch fixes copy-paste issue: pci_hose[0]'s first and last
597 busnos were used to fixup pci1's nodes.
599 We don't see this bug triggering only because Linux reenumerate
602 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
603 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
605 commit b24a99f6666ac278ec9f9c1334518af828833d19
606 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
607 Date: Thu Feb 19 18:20:44 2009 +0300
609 mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
611 This patch fixes an issue in config space read accessors: we should
612 fill-in the value even if we fail (e.g. skipping devices), otherwise
613 CONFIG_PCI_SCAN_SHOW reports bogus values during boot up.
615 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
618 commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022
619 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
620 Date: Thu Feb 19 18:20:42 2009 +0300
622 mpc83xx: PCIe: Don't start bus enumeration at 0
624 Currently we assign first_busno = 0 for the first PCIe hose, but this
625 scheme won't work if we have ordinary PCI hose already registered (its
626 first_busno value is 0 too).
628 The old code worked fine only because we have PCI disabled on
629 MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3
630 "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
631 But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
634 So, to fix the issue, we should use pci_last_busno() + 1 for the
635 first_busno (i.e. last available busno).
637 Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
638 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
639 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
641 commit cc2a8c7751ddbae3116660064f446888538b93e9
642 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
643 Date: Thu Feb 19 18:20:41 2009 +0300
645 PCI: Add pci_last_busno() helper
647 This is just a handy routine that reports last PCI busno: we walk
648 down all the hoses and return last hose's last_busno.
650 Will be used by PCI/PCIe initialization code.
652 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
653 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
655 commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
656 Author: Becky Bruce <beckyb@kernel.crashing.org>
657 Date: Mon Feb 23 13:56:51 2009 -0600
659 MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
661 Currently, we get 256MB as the default, but since all the 86xx
662 board configs define a 2G BAT mapping for RAM, raise default
665 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
666 Acked-by: Jon Loeliger <jdl@freescale.com>
668 commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa
669 Author: Becky Bruce <beckyb@kernel.crashing.org>
670 Date: Thu Feb 12 10:43:32 2009 -0600
672 mpc8641hpcn: Indicate 36-bit addr map in boot messages
674 If 36-bit addressing is enabled, print a message on the console
677 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
679 commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
680 Author: Heiko Schocher <hs@denx.de>
681 Date: Tue Feb 10 09:38:52 2009 +0100
683 netloop: speed up NetLoop
685 NetLoop polls every cycle with getenv some environment variables.
686 This is horribly slow, especially when the environment is big.
688 This patch reads only the environment variables in NetLoop,
689 when they were changed.
691 Also moved the init part of the NetLoop function in a seperate
694 Signed-off-by: Heiko Schocher <hs@denx.de>
695 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
697 commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87
698 Author: Mike Frysinger <vapier@gentoo.org>
699 Date: Mon Dec 22 02:56:07 2008 -0500
701 smc911x_eeprom: new example app for managing newer SMC parts
703 A forward port of the last version to work with the newer smc911x driver.
704 I only have a board with a LAN9218 part on it, so that is the only one
705 I've tested. But there isn't anything in this that would make it terribly
708 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
709 CC: Sascha Hauer <s.hauer@pengutronix.de>
710 CC: Guennadi Liakhovetski <lg@denx.de>
711 CC: Magnus Lilja <lilja.magnus@gmail.com>
712 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
714 commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6
715 Author: Pieter Henning <phenning@vastech.co.za>
716 Date: Sun Feb 22 23:17:15 2009 -0800
718 Added Vitesse VSC8211 definitions to TSEC driver
720 Added the struct containing PHY settings for the Vitesse VSC8211 phy to
721 the phy_info list in tsec.c
723 Signed-off-by: Pieter Henning <phenning@vastech.co.za>
724 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
726 commit 32688e572ff96715b41420e9a7f280db6c399b65
727 Author: Wolfgang Denk <wd@denx.de>
728 Date: Mon Feb 23 00:22:21 2009 +0100
730 Update CHANGELOG; Prepare 2009.03-rc1
732 Signed-off-by: Wolfgang Denk <wd@denx.de>
734 commit 80b827c2b78329c6503b271e43d9eb693d644710
735 Author: Wolfgang Denk <wd@denx.de>
736 Date: Sun Feb 22 23:45:40 2009 +0100
738 ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5
740 The file was generated from building versatile_defconfig.
742 Signed-off-by: Wolfgang Denk <wd@denx.de>
744 commit 14209ac13ff631e36c9a9dd426c59c2e2f5dab00
745 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
746 Date: Sun Feb 22 14:24:11 2009 +0900
748 MIPS: Fix GCC-4.2 'discards qualifiers from pointer target type' warnings
750 Compiling dbau1x00 and gth2 boards with GCC-4.2, you would see new warnings
753 skuribay@ubuntu:u-boot.git$ ./MAKEALL dbau1000
754 Configuring for dbau1x00 board...
755 au1x00_eth.c: In function 'au1x00_send':
756 au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
757 au1x00_eth.c: In function 'au1x00_recv':
758 au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
759 au1x00_eth.c: In function 'au1x00_init':
760 au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
761 au1x00_eth.c: In function 'au1x00_recv':
762 au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
763 au1x00_eth.c: In function 'au1x00_init':
764 au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
765 au1x00_eth.c: In function 'au1x00_send':
766 au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
768 We're passing a volatile pointer to a function which is expecting a non-
769 volatile pointer. That's potentially dangerous, so gcc warns about it.
770 Confirmed with ELDK 4.2 (GCC 4.2.2) and Sourcey G++ 4.2 (GCC 4.2.3).
772 To fix this, we add a volatile attribute to the argument in question.
773 The virt_to_phys function in Linux kernel also does the same thing.
775 Signed-off-by: Stefan Roese <sr@denx.de>
776 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
778 commit aba45c85b22f8c57fc2fedba8e948e06c2e2f5b3
779 Author: Dirk Behme <dirk.behme@googlemail.com>
780 Date: Fri Feb 20 17:51:28 2009 +0100
782 OMAP3: Clean up MMC code
784 Clean up OMAP3 MMC code:
786 * Convert register access to struct & readx/writex style
787 * Replace hardcode values by macros
788 * Remove macro defined twice
790 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
792 commit cfcdf4a9b361d015c0debac73fbf7c511df4a934
793 Author: Dirk Behme <dirk.behme@googlemail.com>
794 Date: Thu Feb 12 18:55:43 2009 +0100
796 OMAP3: Pandora: Update pin mux
798 Clock pin must have input enabled for MMC3 to work.
799 Also enable pull-ups for cmd/data lines to be consistent
800 with remaining MMC host pin setup.
802 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
804 commit 6530a8bf8a0274b9419141e4c2c5a235cce5380f
805 Author: Dirk Behme <dirk.behme@googlemail.com>
806 Date: Thu Feb 12 18:55:42 2009 +0100
808 OMAP3: Add OMAP3 auto detection
810 This patch adds OMAP3 cpu type auto detection based on OMAP3 register
811 and removes hardcoded values.
813 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
814 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
816 commit f956fd0338f4990793a10f767929ba4963665261
817 Author: Dirk Behme <dirk.behme@googlemail.com>
818 Date: Thu Feb 12 18:55:41 2009 +0100
820 OMAP3: Beagle: Add board revision detection
822 With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
823 which might need different software handling. For this, GPIO pin 171 (GPIO
824 module 6, offset 11) can be used to check for board revision. If this pin
825 is low, we have a rev C board. Else it must be a revision Ax or Bx board.
827 To handle board differences you can call function beagle_get_revision().
830 if (beagle_get_revision()) {
832 /* do special revision C stuff here */
836 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
838 commit 288f3cd912918b97919d13b6f7fb13fbddf74d68
839 Author: Dirk Behme <dirk.behme@googlemail.com>
840 Date: Thu Feb 12 18:55:40 2009 +0100
842 OMAP3: Overo: Clean up pin mux and GPIO configuration
844 * Make Overo GPIO114 an input for touchscreen PENDOWN
845 * Make Overo GPIO144-147 readable
846 * Make Overo EHCI pinmux match beagle rev c setup
847 * Adjust pinmux for SMSC911X network chip support
848 * Remove unnecessary GPIO setup
849 * Fix merge error in Makefile
851 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
852 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
854 commit 2579019b8248e5f166e60e37065766efc8a49dbc
855 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
856 Date: Sun Feb 22 17:08:41 2009 +0100
858 nmdk8815: fix onenand support
860 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
862 commit 0176c03a2469676df5bf19cf93a1a6f582f6a120
863 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
864 Date: Sun Feb 22 17:56:50 2009 +0100
866 nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
868 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
870 commit 9751a456f702ba2fcdfd1bdbc0138927ef007858
871 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
872 Date: Sun Feb 22 17:49:43 2009 +0100
874 davinci: fix implicit declaration of function 'davinci_errata_workarounds'
876 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
878 commit 4f5728987f4f9f7845688482aa2b7f2127768165
879 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
880 Date: Sun Feb 22 15:49:28 2009 +0100
882 arm: add uart dcc support
884 Serial driver via the EmbeddedICE macrocell's DCC channel using
887 It does include a timeout to ensure that the system does not
888 totally freeze when there is nothing connected to read.
890 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
892 commit 0cd18fa982f9a8c1a90ce971379a7d6408976d48
893 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
894 Date: Fri Nov 21 14:35:56 2008 -0500
896 ARM DaVinci: Add common peripherals and modules enable functions.
898 Taken all the duplicated code for enabling common modules and apply
899 software workarounds from the board specific code into common
900 functions. Also added comments explaining the workarounds
901 (from TI errata documents) and replaced some numerical bit numbers
902 with more meaningful defines.
904 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
906 commit d3be1bcae7a8207e0a79ffd035d0e90f80378295
907 Author: Alessandro Rubini <rubini@unipv.it>
908 Date: Mon Feb 9 15:53:33 2009 +0100
910 Enable Ethernet for Nomadik 8815 Evaluation Kit
912 This trivially enables Ethernet support in the debug board
913 by setting up the proper chip select.
915 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
916 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
918 commit 0d8c6eab2481046e9446264bfe9402bb98ddf433
919 Author: Alessandro Rubini <rubini@unipv.it>
920 Date: Mon Feb 9 15:53:31 2009 +0100
922 Nand driver for Nomadik SoC
924 This driver implements the ECC algorithm described in
925 the CPU data sheet and uses the OOB layout chosen in
926 already-released development systems (shipped with a custom-made
929 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
930 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
932 commit ef339cc2b68e4cbef3f9376a45315e1b974bbd8d
933 Author: Alessandro Rubini <rubini@unipv.it>
934 Date: Mon Feb 9 15:53:31 2009 +0100
936 Added nomadik.h header
938 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
939 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
941 commit 60ece6d8043d1dd80f5dd32c541213716d624b19
942 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
943 Date: Wed Oct 29 20:05:18 2008 +0900
945 r8a66597-hcd: fix cannot use external hub
947 Fix the problem that cannot use external hub, because this driver
948 did not control correctly a DEVADDx register.
950 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
951 Signed-off-by: Remy Bohmer <linux@bohmer.net>
953 commit e1ffaee728190e76a4596a3579d94e730143585f
954 Author: Mike Frysinger <vapier@gentoo.org>
955 Date: Thu Feb 19 01:20:27 2009 -0500
957 Blackfin: disable syscontrol code for now
959 Looks like the initcode updates fell out of order during my merges. The
960 patch that really fixes up this code is part of power-on overhaul and so
961 is too large for merging at this point. Instead, we can disable the code
962 as no currently in-tree board depends on it. The next merge window will
963 fix things up properly.
965 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
967 commit 1b228d68f54832edd867ef98520f760f68192ab7
968 Author: Mike Frysinger <vapier@gentoo.org>
969 Date: Thu Feb 19 01:19:49 2009 -0500
971 Blackfin: bf537-stamp: fix I2C board defines
973 The previous merge for cleaning up the I2C driver incorrectly reverted the
974 CFG_xxx rename for some of the I2C defines.
976 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
977 Signed-off-by: Heiko Schocher <hs@denx.de>
979 commit 09fee8e8677a6265e89144ccc163bf00e321769e
980 Author: Wolfgang Denk <wd@denx.de>
981 Date: Sun Feb 22 01:19:52 2009 +0100
983 Coding Style cleanup; update CHANGELOG
985 Signed-off-by: Wolfgang Denk <wd@denx.de>
987 commit 1dcb50afbb63a439320a985380a0af2dca079d1e
988 Author: Wolfgang Denk <wd@denx.de>
989 Date: Sun Feb 22 01:17:47 2009 +0100
991 Makefile: fix cleanup
993 Commit e4943ec5 moved the ARM boards to a vendor directory but forgot
994 to adapt the cleanup rules in the Makefile
996 Signed-off-by: Wolfgang Denk <wd@denx.de>
998 commit edff7bcc4d5540df8b416274652ff02e94c38b9e
999 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
1000 Date: Fri Feb 20 13:01:56 2009 -0500
1002 Cleanup the comment for m68k linux boot argument passing.
1004 This patch clarifies the way m68k passes linux boot argument.
1005 The one gotcha here is that the assembly instruction that
1006 the compiler uses to jump to the kernel is 'jsr' which pushes the
1007 program counter for the instruction after the jsr into the stack pointer.
1009 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
1010 Signed-off-by: Wolfgang Denk <wd@denx.de>
1012 commit 4d41650eec959668280a612467bd95c7b8398513
1013 Author: Peter Griffin <pgriffin@mpc-data.co.uk>
1014 Date: Tue Feb 10 16:44:45 2009 +0000
1016 sh: Fix rsk7203 in tree build
1018 Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
1020 commit fca0cecff73db99d99ad094cca7980472b8a11b5
1021 Author: Minkyu Kang <mk7.kang@samsung.com>
1022 Date: Wed Feb 18 09:05:52 2009 +0900
1024 bootm: Reduce the unnecessary memmove
1026 Although load address and image start address are same address,
1027 bootm command always does memmove.
1028 That is unnecessary memmove and can be taken few milliseconds
1029 (about 500 msec to 1000 msec).
1030 If skip this memmove, we can reduce the boot time.
1032 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
1034 commit 670cbde8da83690fed1064c3358f54ae1d693ed2
1035 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
1036 Date: Sun Feb 15 22:29:15 2009 +0100
1038 fpga: Fix Spartan III FPGA booting
1040 This patch does some minor fixing of the Xilinx Spartan III
1043 - Fixed call order of post configuration callback and
1044 success message printing (result of copy-paste?)
1045 - remove obsolete comment
1046 - minor coding style cleanup
1048 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1050 commit 3818b677641038d27b2663fbd6771ad38c932f86
1051 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
1052 Date: Sun Feb 15 22:28:36 2009 +0100
1054 fpga: Fix Spartan II FPGA booting
1056 This patch does some minor fixing of the Xilinx Spartan II
1059 - Fixed call order of post configuration callback and
1060 success message printing (result of copy-paste?)
1061 - relocate post configuration callback only when it
1063 - remove obsolete comment
1064 - minor coding style cleanup
1066 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1068 commit b4746d8bf9f4ed6dc8a76c5d52db669604aff84b
1069 Author: Mike Frysinger <vapier@gentoo.org>
1070 Date: Wed Feb 11 20:26:52 2009 -0500
1072 drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)
1074 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1076 commit 6bcb4b806cef8a5dd08fac9a4a672b96d9ee804e
1077 Author: Derek Ou <dou@siconix.com>
1078 Date: Tue Feb 3 16:00:07 2009 -0700
1080 lcd_putc bug fix for tab.
1082 Signed-off-by: Derek Ou <dou@siconix.com>
1084 commit 35c9e14d8096e519fe76c953a43d52a09617345c
1085 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1086 Date: Mon Feb 2 09:46:21 2009 +0900
1088 MIPS: cpu/mips/Makefile: Add a missing START line
1090 In the commit 79b51ff8205f0354d5300570614c1d2db499679c ([MIPS] cpu/mips/
1091 Makefile: Split [CS]OBJS onto separate lines), I wrongly deleted a START
1092 line. This patch puts it back.
1094 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1096 commit 9a63b7f4f8f3c99cf017e0d3d4a152dfcd913b5a
1097 Author: Wolfgang Denk <wd@denx.de>
1098 Date: Sat Feb 21 21:51:21 2009 +0100
1100 Enable ext2 support for TQM8xxL/M based boards
1102 Signed-off-by: Wolfgang Denk <wd@denx.de>
1104 commit e3ba7f137c7c454ad626cd0bd2e84d73c7a8644f
1105 Author: Tom Rix <Tom.Rix@windriver.com>
1106 Date: Fri Feb 20 03:47:50 2009 +0100
1108 ARM:PXA Use new definitions in mmc.h
1110 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
1111 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1113 commit 682beeac34dc9ab18fab58b26973d2e29d113717
1114 Author: Andy Fleming <afleming@freescale.com>
1115 Date: Fri Feb 20 03:47:50 2009 +0100
1117 Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions
1119 These names are being taken over by the new MMC framework. Hopefuly
1120 the PXA can be easily ported, and these functions will go away entirely.
1122 Signed-off-by: Andy Fleming <afleming@freescale.com>
1123 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1125 commit b03d92e5584935886ff91d5aa0755dc8888b7187
1126 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1127 Date: Fri Feb 20 03:47:50 2009 +0100
1129 pxa: move mmc drivers to drivers/mmc
1131 introduce new macro CONFIG_PXA_MMC to activate it
1133 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1135 commit 9490f465642c80c054854689a2ef1a77d65cf1f3
1136 Author: Tom Rix <Tom.Rix@windriver.com>
1137 Date: Thu Feb 19 19:27:22 2009 -0600
1139 ARM:PXA Remove redefinition of mmc_cid and mmc_csd.
1141 These structures are defined in the common mmc.h
1143 This was compile checked on cerf250.
1145 commit 94a3312920b6f9b5da27309549fb73650718c10a
1146 Author: Micha Kalfon <smichak.uv@gmail.com>
1147 Date: Wed Feb 11 19:50:11 2009 +0200
1149 pxa: fixing get_timer to return time in miliseconds.
1151 Fixing the get_timer function to return time in miliseconds instead of
1152 ticks. Also fixed PXA boards to use the conventional value of 1000 for
1155 Signed-off-by: Micha Kalfon <smichak.uv@gmail.com>
1157 commit e5e88c3614b79b54719905f66aefb51f9494bc1f
1158 Author: Tom Rix <Tom.Rix@windriver.com>
1159 Date: Thu Feb 19 16:45:43 2009 -0600
1161 ARM:OMAP3 Change mmc_init to mmc_legacy_init
1163 omap3_mmc.c was changed to define mmc_legacy_init.
1164 Remove unused functions.
1166 Compile tested on all arm
1167 Runtime tested on Zoom1.
1169 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
1171 commit 9e80bb21629988063574f88ca0d28baadff4d963
1172 Author: Heiko Schocher <hs@denx.de>
1173 Date: Thu Feb 19 17:23:58 2009 +0100
1175 82xx, mgcoge: updates for 2009.03
1177 - activate CS4 for accessing the FPGA
1178 - activate Rx buf len > 1 on SMC
1180 - MTDPARTS_DEFAULT defined
1181 - update the size of the flashes in the DTS
1182 before booting Linux
1183 - MONITOR_LEN updated to 384k
1184 - added CONFIG_HOSTNAME
1185 - added CONFIG_ENV_BUFFER_PRINT
1186 - Environment size reduced to 16k
1188 Signed-off-by: Heiko Schocher <hs@denx.de>
1190 commit df909554e2401f307925e1bd45d576e4176d9de9
1191 Author: Heiko Schocher <hs@denx.de>
1192 Date: Thu Feb 19 17:24:01 2009 +0100
1194 8xx, mgsuvd: updates for 2009.03
1196 - activate Rx buf len > 1 on SMC
1198 - MTDPARTS_DEFAULT defined
1199 - update the size of the flash in the DTS
1200 before booting Linux
1201 - MONITOR_LEN updated to 384k
1202 - added CONFIG_HOSTNAME
1203 - added CONFIG_ENV_BUFFER_PRINT
1204 - Environment size reduced to 16k
1206 Signed-off-by: Heiko Schocher <hs@denx.de>
1208 commit 3511b4e208e12be85b532866f1c660aa2e021557
1209 Author: Dirk Behme <dirk.behme@googlemail.com>
1210 Date: Wed Feb 18 19:59:39 2009 +0100
1212 MMC: Don't use new framework code if not enabled
1214 Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
1217 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
1219 commit 32482be67775e00b4cbc49fba62347c1ecc6229c
1220 Author: Wolfgang Denk <wd@denx.de>
1221 Date: Thu Feb 19 13:53:29 2009 +0100
1223 TQM8xxL: make some room in low memory for future needs
1225 THe TQM8xxL use a ahnd-optimized linker script to efficiently use the
1226 small boot sectors in the flash. This patch makes some room in the
1227 first sector to prepare for a size increase of lib_generic/vsprintf.o
1230 Signed-off-by: Wolfgang Denk <wd@denx.de>
1232 commit c157cec3c3f6dfc194532b3a3ca87f85b642962a
1233 Author: Kim Phillips <kim.phillips@freescale.com>
1234 Date: Wed Feb 18 18:06:18 2009 -0600
1236 README: remove duplicate entry
1238 it's been around since the original commit (2ad6b513) that added two
1241 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1243 commit 1bba30efe1717bea13026e15c7c7d906419fac69
1244 Author: Wolfgang Denk <wd@denx.de>
1245 Date: Thu Feb 19 00:41:08 2009 +0100
1247 Coding style cleanup, update CHANGELOG
1249 Signed-off-by: Wolfgang Denk <wd@denx.de>
1251 commit 369d0aa9674b65c83f8553b9bcf9d207dc369223
1252 Author: Kim Phillips <kim.phillips@freescale.com>
1253 Date: Wed Feb 18 17:43:59 2009 -0600
1255 sata_sil3114: fix compiler warning
1257 judging from other printfs in the same file, it seems ata should be
1258 postpended with the interface number, not the address of the global
1259 port variable. Fixes this for current u-boot-mpc83xx tree:
1261 Configuring for MPC8349ITX board...
1262 sata_sil3114.c: In function 'sata_bus_softreset':
1263 sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
1264 sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
1266 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1268 commit f5675aa5ceeef30740970ab8ca0c8cbc324945cd
1269 Author: Ron Madrid <ron_madrid@sbcglobal.net>
1270 Date: Wed Feb 18 14:30:44 2009 -0800
1272 Create configuration option for restricted ns16550 functions
1274 This patch will create a configuration option for a minimum configuration for
1275 the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
1276 configuration option to the SIMPC8313.h config file in order to fix the NAND
1277 bootstrap build error. This option will exclude all functions with exception of
1278 NS16550_putc and NS16550_init. This will be used primarily to save space and
1279 remove unused code from builds in which space is limited.
1281 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
1283 commit 7b0bc0219db8981613259473cf19699ac259b4fb
1284 Author: Kim Phillips <kim.phillips@freescale.com>
1285 Date: Wed Feb 18 16:14:29 2009 -0600
1287 mkconfig: include board config.h before asm/config.h
1289 swapping the include order suppresses warnings for board configs
1290 that define their own CONFIG_MAX_MEM_MAPPED:
1292 In file included from /home/r1aaha/git/u-boot/include/config.h:5,
1293 from /home/r1aaha/git/u-boot/include/common.h:35,
1294 from simpc8313.c:26:
1295 /home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
1296 "CONFIG_MAX_MEM_MAPPED" redefined
1297 In file included from /home/r1aaha/git/u-boot/include/config.h:4,
1298 from /home/r1aaha/git/u-boot/include/common.h:35,
1299 from simpc8313.c:26:
1300 /home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
1301 the location of the previous definition
1303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1305 commit b8845abdc0dcf20d0944e965153f5ae7a9c3077c
1306 Author: Wolfgang Denk <wd@denx.de>
1307 Date: Wed Feb 18 21:35:38 2009 +0100
1309 Fix build errors after making flash_get_info() non-static
1311 Fix for these build problems:
1312 error: static declaration of 'flash_get_info' follows non-static declaration
1314 Signed-off-by: Wolfgang Denk <wd@denx.de>
1316 commit b4996d6b2140e5da7f1c346f37a67b19907b307a
1317 Author: Stefan Roese <sr@denx.de>
1318 Date: Wed Feb 18 13:18:00 2009 +0100
1320 ppc4xx: PCIe: Change 16GB inbound memory to 4GB
1322 This patch fixes a problem recently seen on some 4xx platforms. For
1323 example on Kilauea PCIe slot #0.
1325 Signed-off-by: Stefan Roese <sr@denx.de>
1327 commit f50fe4bd613c6d35a2c34055f02e9501dd6a9ad5
1328 Author: Stefan Roese <sr@denx.de>
1329 Date: Wed Feb 18 14:05:37 2009 +0100
1331 ppc4xx: Some more PMC405 coding-style cleanup
1333 Signed-off-by: Stefan Roese <sr@denx.de>
1335 commit 2f6eb9170bf91b72ea51dcea2a8b9c11b0e20bc5
1336 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
1337 Date: Sun Feb 15 22:27:47 2009 +0100
1339 ppc4xx: Update PMC405 board support
1341 This patch prepares the good old PMC405 board support for
1342 upcoming PMC405V2 patches.
1344 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1345 Signed-off-by: Stefan Roese <sr@denx.de>
1347 commit c553b5f4a0c77fc76e1d25e71c8aaa47657e2d6f
1348 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
1349 Date: Sun Feb 15 22:26:54 2009 +0100
1351 ppc4xx: Cleanup PMC405 board support
1353 This patch fixes coding style for PMC405 board support.
1354 Also some unneeded features/code is removed.
1356 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1357 Signed-off-by: Stefan Roese <sr@denx.de>
1359 commit b4e85d0f37b5b924fbf834867ad6d0b31b86f667
1360 Author: Ilya Yanok <yanok@emcraft.com>
1361 Date: Thu Feb 5 04:08:20 2009 +0100
1363 qong: changes to Dave/DENX Qong configuration
1365 1. Changes to the default environment:
1366 - "bootcmd" defined as "run flash_self"
1367 - "saveenv" command removed from "update"
1368 - "uboot" changed to "u-boot" (also in "load")
1369 - "addmtd" variable defined (and added to all boot commands)
1370 2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
1371 3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
1372 4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
1373 with truncated "bootargs" environment variable.
1375 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
1377 commit 5f0320108870e5d62983d1d5c13a2a087dddf686
1378 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1379 Date: Sun Feb 1 17:07:52 2009 +0100
1381 common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible
1383 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1385 commit ec6f14994602276660f7264c6ab3b91ef1f7614d
1386 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1387 Date: Sun Feb 1 17:07:51 2009 +0100
1389 common/console: coding style cleanup
1391 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1393 commit daaf74f176b548dfd34a9990231f4189201d57ba
1394 Author: Mike Frysinger <vapier@gentoo.org>
1395 Date: Thu Jan 29 20:02:23 2009 -0500
1397 mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile
1399 Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
1400 into the Makefile so we avoid pointless compiling of the file.
1402 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1404 commit 7bd2722e890bc877a3c057d7ccddc80451c99939
1405 Author: Mike Frysinger <vapier@gentoo.org>
1406 Date: Thu Jan 29 20:02:07 2009 -0500
1408 disk: convert part_* files to COBJ-$(CONFIG_XXX) style
1410 Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
1411 avoid pointless compiles.
1413 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1415 commit f05fa9205e04986176dc7ab8b710bcb5fbe9f338
1416 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
1417 Date: Thu Jan 29 10:35:40 2009 +0200
1419 include/image.h: Ease grepping of image_* functions
1421 Because the functions have been defined using macros, grepping for
1422 their definitions is not possible. This patch adds the real function
1425 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
1426 Acked-by: Mike Frysinger <vapier@gentoo.org>
1428 commit bdab39d358e63aa47f400a8a76b8d5f283842df3
1429 Author: Mike Frysinger <vapier@gentoo.org>
1430 Date: Wed Jan 28 19:08:14 2009 -0500
1432 rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
1434 The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
1435 rather than a generic "env" command, or anything else related to the
1436 environment. So, let's make sure the define is named accordingly.
1438 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1440 commit 8b0592b89e0f9f81c9e150c81d96f8a43e4d6101
1441 Author: Valeriy Glushkov <gvv@lstec.com>
1442 Date: Fri Jan 23 20:02:17 2009 +0200
1444 disable imls command if no flash is defined
1446 Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined
1448 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
1450 commit 923aa48126259c13de95131203f1d28bfa5cb889
1451 Author: Rafal Jaworowski <raj@semihalf.com>
1452 Date: Fri Jan 23 13:27:18 2009 +0100
1454 API: Improve glue mid-layer of the API demo application.
1456 - Extend ub_dev_read() and ub_dev_recv() so they return the length actually
1457 read, which allows for better control and error handling (this introduces
1458 additional error code API_ESYSC returned by the glue mid-layer).
1460 - Clean up definitions naming and usage.
1462 - Other minor cosmetics.
1464 Note these changes do not touch the API proper, so the interface between
1465 U-Boot and standalone applications remains unchanged.
1467 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1469 commit 44a94e596ba0f6d0951b165403c520bf55b1c56f
1470 Author: Rafal Jaworowski <raj@semihalf.com>
1471 Date: Fri Jan 23 13:27:17 2009 +0100
1473 API: Only output test data when reading was successful.
1475 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
1477 commit 7fb6c4f9b06c5539043c8bfc6565710b8090841d
1478 Author: Rafal Jaworowski <raj@semihalf.com>
1479 Date: Fri Jan 23 13:27:16 2009 +0100
1481 API: Provide syscall entry point for the ARM architecture.
1483 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
1484 Acked-by: Rafal Jaworowski <raj@semihalf.com>
1486 commit b84d7d8f1e1066f810866304a16a3583f88e7c98
1487 Author: Rafal Jaworowski <raj@semihalf.com>
1488 Date: Fri Jan 23 13:27:15 2009 +0100
1490 API: Use stack pointer as API signature search hint in the glue layer.
1492 De-hardcode range in RAM we search for the API signature. Instead use the stack
1493 pointer as a hint to narrow down the range in which the signature could reside
1494 (it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
1495 from stack area). Adjust PowerPC code in API demo to the new scheme.
1497 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
1498 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1500 commit 86b4bafdfaf669ede8fd99044abc7e27ea29b4f5
1501 Author: Wolfgang Denk <wd@denx.de>
1502 Date: Tue Feb 17 10:26:38 2009 +0100
1504 TQM8260: fix locations of kernel and ramdisk images in flash
1506 After introducing redundant environment the kernel images was
1507 overlapping with environment.
1509 Signed-off-by: Wolfgang Denk <wd@denx.de>
1511 commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb
1512 Author: Heiko Schocher <hs@denx.de>
1513 Date: Wed Feb 11 19:26:15 2009 +0100
1515 83xx: add missing TIMING_CFG1_CASLAT_* defines
1517 Signed-off-by: Heiko Schocher <hs@denx.de>
1518 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1520 commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5
1521 Author: Valeriy Glushkov <gvv@lstec.com>
1522 Date: Thu Feb 5 14:35:21 2009 +0200
1524 mpc8349itx: allow SATA boot from the onboard SIL1334
1526 This patch allows using of SATA devices connected
1527 to the onboard PCI SIL1334 SATA controller.
1529 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
1530 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1532 commit e1ac387f4645499746856adc1aeaa9787da2eca6
1533 Author: Andy Fleming <afleming@freescale.com>
1534 Date: Thu Oct 30 16:50:14 2008 -0500
1536 83xx: Add eSDHC support on 8379 EMDS board
1538 Signed-off-by: Andy Fleming <afleming@freescale.com>
1540 commit 80522dc8369a89938369fbcee572e662373bc9a3
1541 Author: Andy Fleming <afleming@freescale.com>
1542 Date: Thu Oct 30 16:51:33 2008 -0500
1544 85xx: Add eSDHC support for 8536 DS
1546 Signed-off-by: Andy Fleming <afleming@freescale.com>
1548 commit 50586ef24ed5caf6ce5591df76f355009da2cd79
1549 Author: Andy Fleming <afleming@freescale.com>
1550 Date: Thu Oct 30 16:47:16 2008 -0500
1552 Add support for the Freescale eSDHC found on 8379 and 8536 SoCs
1554 This uses the new MMC framework
1556 Some contributions by Dave Liu <daveliu@freescale.com>
1558 Signed-off-by: Andy Fleming <afleming@freescale.com>
1560 commit 272cc70b211e945e4413122aa73868f6ada732a5
1561 Author: Andy Fleming <afleming@freescale.com>
1562 Date: Thu Oct 30 16:41:01 2008 -0500
1566 Here's a new framework (based roughly off the linux one) for managing
1567 MMC controllers. It handles all of the standard SD/MMC transactions,
1568 leaving the host drivers to implement only what is necessary to
1569 deal with their specific hardware.
1571 This also hooks the infrastructure into the PowerPC board code
1572 (similar to how the ethernet infrastructure now hooks in)
1574 Some of this code was contributed by Dave Liu <daveliu@freescale.com>
1576 Signed-off-by: Andy Fleming <afleming@freescale.com>
1578 commit 1de97f9856f697380cc504126ab92561ed238803
1579 Author: Andy Fleming <afleming@freescale.com>
1580 Date: Thu Oct 30 16:31:39 2008 -0500
1582 Eliminated arch-specific mmc header requirement
1584 The current MMC infrastructure relies on the existence of an
1585 arch-specific header file. This isn't necessary, and a couple
1586 drivers were forced to implement dummy files to meet this requirement.
1587 Instead, we move the stuff in those header files into a more appropriate
1588 place, and eliminate the stubs and the #include of asm/arch/mmc.h
1590 Signed-off-by: Andy Fleming <afleming@freescale.com>
1592 commit abb5466ccf4ce50f412d459586f4f4b81cb73ac3
1593 Author: Andy Fleming <afleming@freescale.com>
1594 Date: Thu Oct 30 16:21:00 2008 -0500
1596 Convert mmc_init to mmc_legacy_init
1598 This is to get it out of the way of incoming MMC framework
1600 Signed-off-by: Andy Fleming <afleming@freescale.com>
1602 commit b2e2ed0233a5ef299361abec4fbdaefb63456eff
1603 Author: Andy Fleming <afleming@freescale.com>
1604 Date: Thu Oct 30 16:19:25 2008 -0500
1606 Eliminate support for using MMC as memory
1608 MMC cards are not memory, so we stop treating them that way.
1610 Signed-off-by: Andy Fleming <afleming@freescale.com>
1612 commit e1be0d25ecf494ae81245ca438738ba839d6329b
1613 Author: Poonam_Aggrwal-b10812 <b10812@freescale.com>
1614 Date: Sun Jan 4 08:46:38 2009 +0530
1616 32bit BUg fix for DDR2 on 8572
1618 This errata fix is required for 32 bit DDR2 controller on 8572.
1619 May also be required for P10XX20XX platforms
1621 Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
1623 commit e0c4fac79d4d74572ddd43f75e7189cecca8d0ad
1624 Author: Andy Fleming <afleming@freescale.com>
1625 Date: Mon Feb 16 09:40:20 2009 -0600
1627 TQM85xx: Fix a couple warnings in TQM8548 build
1629 The ecm variable in sdram.c was being declared for all 8548, but only
1630 used by specific 8548 boards, so we make that variable require those
1631 specific boards, too
1633 The nand code was using an index "i" into a table, and then re-using "i"
1634 to set addresses for each upm. However, then it relied on the old value
1635 of i still being there to enable things. Changed the second "i" to "j"
1637 Signed-off-by: Andy Fleming <afleming@freescale.com>
1639 commit cf07a5baece0ecfc5284cfda8a4e68eaf92782f8
1640 Author: Wolfgang Grandegger <wg@grandegger.com>
1641 Date: Wed Feb 11 18:38:26 2009 +0100
1643 MPC85xx: TQM8548: workaround for erratum DDR 19 and 20
1645 This patch adds the workaround for erratum DDR20 according to MPC8548
1646 Device Errata document, Rev. 1: "CKE signal may not function correctly
1647 after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
1648 processor version 2.1 and the work-around must be removed.
1650 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1652 commit 080408fdc71706adcb883d22125637c54f6010b1
1653 Author: Wolfgang Grandegger <wg@grandegger.com>
1654 Date: Wed Feb 11 18:38:25 2009 +0100
1656 MPC85xx: TQM8548: use cache for AG and BE variants
1658 This patch makes accesses to the system memory cachable by removing the
1659 caching-inhibited and guarded flags from the relevant TLB entries for
1660 the TQM8548_BE and TQM8548_AG modules. FYI, the Freescale MPC85* boards
1661 are configured similarly.
1663 This results in a big averall performace improvement. TFTP downloads,
1664 NAND Flash accesses, kernel boots, etc. are much faster.
1666 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1668 commit dc5f55d636d7bf21ba17758fac4b929ec4c059f2
1669 Author: Wolfgang Grandegger <wg@grandegger.com>
1670 Date: Wed Feb 11 18:38:24 2009 +0100
1672 MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration
1674 This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
1677 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
1678 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1680 commit 88b0e88d186479349e5a2b771e82775109e10fb4
1681 Author: Wolfgang Grandegger <wg@grandegger.com>
1682 Date: Wed Feb 11 18:38:23 2009 +0100
1684 MPC85xx: TQM8548: fix SDRAM timing for 533 MHz
1686 According to new TQM8548 timing specification:
1687 Refresh Recovery: 34 -> 53 clocks
1688 CKE pulse width: 1 -> 3 cycles
1689 Window for four activities: 13 -> 14 cycles
1691 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
1692 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1694 commit a865bcdac89278cac4dfc07dec8299403110499d
1695 Author: Wolfgang Grandegger <wg@grandegger.com>
1696 Date: Wed Feb 11 18:38:22 2009 +0100
1698 MPC85xx: TQM8548: add support for the TQM8548_AG module
1700 The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
1701 CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
1702 with "$ make TQM8548_AG_config".
1704 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1706 commit ad7ee5d43b0db94079d56521dabca25674f28747
1707 Author: Wolfgang Grandegger <wg@grandegger.com>
1708 Date: Wed Feb 11 18:38:21 2009 +0100
1710 MPC85xx: TQM8548: add support for the TQM8548_BE module
1712 The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
1713 interface. With NAND support, the image is significantly larger and
1714 TEXT_BASE is adjusted accordingly. U-Boot can be built for this
1715 module with "$ make TQM8548_BE_config".
1717 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1719 commit a318234878c346e673b2ef8dc4b14b338fe7fc2b
1720 Author: Wolfgang Grandegger <wg@grandegger.com>
1721 Date: Wed Feb 11 18:38:20 2009 +0100
1723 MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
1725 The TQM8548_AG module does not have the standard PCI/PCI-X interface
1726 connected but just the PCI Express interface . So far it was not
1727 possible to disable it without disabling the complete PCI interface
1728 (CONFIG_PCI) including PCI Express.
1730 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1732 commit 31ca9119c3186cec579b54d2a7a2b361b4d2b7bf
1733 Author: Wolfgang Grandegger <wg@grandegger.com>
1734 Date: Wed Feb 11 18:38:19 2009 +0100
1736 MPC85xx: TQM85xx: fix flash protection for boot loader
1738 As the reset vector is located at 0xfffffffc, all flash sectors from the
1739 beginning of the U-Boot binary to 0xffffffff must be protected. On the
1740 TQM8548-AG having small sectors at the end of the flash it happened that
1741 the last two sector were not protected and an "erase all" left an
1742 un-bootable system behind:
1744 Bank # 2: CFI conformant FLASH (32 x 16) Size: 32 MB in 270 Sectors
1745 AMD Standard command set, Manufacturer ID: 0xEC, Device ID: 0x257E
1746 Erase timeout: 8192 ms, write timeout: 1 ms
1748 FFFA0000 E RO FFFC0000 RO FFFE0000 RO FFFE4000 RO FFFE8000 RO
1749 FFFEC000 RO FFFF0000 RO FFFF4000 RO FFFF8000 E FFFFC000
1751 The same bug seems to be in drivers/mtd/cfi_flash.c:flash_init() and many
1754 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1756 commit a1c8a719262151f97119e76166043ee3da3f97b2
1757 Author: Peter Tyser <ptyser@xes-inc.com>
1758 Date: Fri Feb 6 14:30:40 2009 -0600
1760 86xx: Update CPU info output on bootup
1762 - Update style of 86xx CPU information on boot to more closely
1764 - Fix detection of 8641/8641D
1765 - Use strmhz() to display frequencies
1766 - Display L1 information
1767 - Display L2 cache size
1768 - Fixed CPU/SVR version output
1773 Core: E600 Core 0, Version: 0.2, (0x80040202)
1774 System: Unknown, Version: 2.1, (0x80900121)
1775 Clocks: CPU:1066 MHz, MPX: 533 MHz, DDR: 266 MHz, LBC: 133 MHz
1777 Board: X-ES XPedite5170 3U VPX SBC
1780 CPU: 8641D, Version: 2.1, (0x80900121)
1781 Core: E600 Core 0, Version: 2.2, (0x80040202)
1782 Clock Configuration:
1783 CPU:1066.667 MHz, MPX:533.333 MHz
1784 DDR:266.667 MHz (533.333 MT/s data rate), LBC:133.333 MHz
1785 L1: D-cache 32 KB enabled
1786 I-cache 32 KB enabled
1788 Board: X-ES XPedite5170 3U VPX SBC
1790 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1792 commit 22c00f8d7d454d77e759df58415d2d3f3d7e154c
1793 Author: Peter Tyser <ptyser@xes-inc.com>
1794 Date: Thu Feb 5 11:25:24 2009 -0600
1796 86xx: Update Global Utilities structure
1798 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1800 commit 4ef630df773e45806d701bf5d25c328778bb4cde
1801 Author: Peter Tyser <ptyser@xes-inc.com>
1802 Date: Thu Feb 5 11:25:25 2009 -0600
1806 Update the 86xx reset sequence to try executing a board-specific reset
1807 function. If the board-specific reset is not implemented or does not
1808 succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard
1809 reset procedure than the previous method and allows all board
1810 peripherals to be reset if needed.
1812 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1814 commit edf0e2524a8c6a3e91c009c496a0aa0ae89cd8ab
1815 Author: Kumar Gala <galak@kernel.crashing.org>
1816 Date: Tue Feb 10 23:53:40 2009 -0600
1818 fsl-ddr: Allow system to boot if we have more than 4G of memory
1820 Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report
1821 an error and hang. Instead of doing that since DDR is mapped in the
1822 lowest priority LAWs we setup the DDR controller and the max amount
1823 of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED)
1825 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1826 Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
1828 commit 8d949aff38cfb4388cbd73876e77bcd06d601f20
1829 Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
1830 Date: Wed Jan 21 17:17:33 2009 -0600
1832 mpc85xx: Add support for the P2020
1834 Added various p2020 processor specific details:
1835 * SVR for p2020, p2020E
1836 * immap updates for LAWs and DDR on p2020
1837 * LAW defines related to p2020
1839 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
1840 Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
1841 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1843 commit cb69e4de8702e108324e1c40363f30ef6f2e2918
1844 Author: Kumar Gala <galak@kernel.crashing.org>
1845 Date: Tue Feb 10 17:36:15 2009 -0600
1847 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS
1849 Added some info that is printed out when we boot to distiquish if we
1850 built MPC8572DS_config vs MPC8572DS_36BIT_config since they have
1851 different address maps.
1853 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1855 commit feede8b07013b33fca8dd2a916b3ac86bf4d4c0a
1856 Author: Andy Fleming <afleming@freescale.com>
1857 Date: Fri Dec 5 20:10:22 2008 -0600
1859 Fixup SGMII PHY ids in the device tree
1861 The device tree's PHY addresses need to be fixed up if we're using the
1864 The 8572, 8536, and 8544 DS boards were modified to call this function.
1866 Code idea taken from Liu Yu <yu.liu@freescale.com>
1868 Signed-off-by: Andy Fleming <afleming@freescale.com>
1870 commit 5dc0cf68f8f101042997d75188081d8526d705ea
1871 Author: Andy Fleming <afleming@freescale.com>
1872 Date: Wed Feb 11 15:10:31 2009 -0600
1874 Make some minor whitespace changes to eliminate line-wrapping
1876 Signed-off-by: Andy Fleming <afleming@freescale.com>
1878 commit 9e56986a2b74d197f51eca70fad7b836b1900c4d
1879 Author: Andy Fleming <afleming@freescale.com>
1880 Date: Wed Feb 11 15:07:24 2009 -0600
1882 Add eth_get_dev_by_index
1884 This allows code to iterate through the ethernet devices
1886 Signed-off-by: Andy Fleming <afleming@freescale.com>
1888 commit b67305120aaf268a6140125346678166d14f1f47
1889 Author: Kumar Gala <galak@kernel.crashing.org>
1890 Date: Mon Feb 9 22:03:04 2009 -0600
1892 85xx: Fix bug in device tree setup in 36-bit physical confg
1894 In the 36-bit physical config for MPC8572DS when need the start address
1895 of memory and it size to be kept in phys_*_t instead of a ulong since
1896 we support >4G of memory in the config and ulong cant represent that.
1897 Otherwise we end up seeing the memory node in the device tree reporting
1898 back we have memory starting @ 0 and of size 0.
1900 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1902 commit ad97dce18445ff05bf326094e691a01aa95aa8dc
1903 Author: Kumar Gala <galak@kernel.crashing.org>
1904 Date: Mon Feb 9 22:03:05 2009 -0600
1906 85xx: Fix address map for 36-bit config of MPC8572DS
1908 When we introduced the 36-bit config of the MPC8572DS board we had the
1909 wrong PCI MEM bus address map. Additionally, the change to the address
1910 map exposes a small issue in our dummy read on the ULI bus. We need
1911 to use the new mapping functions to handle that read properly in the
1914 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1916 commit f8523cb0815b2d3d2d780b7d49ca614105555f58
1917 Author: Kumar Gala <galak@kernel.crashing.org>
1918 Date: Fri Feb 6 09:56:35 2009 -0600
1920 85xx: Fix how we map DDR memory
1922 Previously we only allowed power-of-two memory sizes and didnt
1923 handle >2G of memory. Now we will map up to CONFIG_MAX_MEM_MAPPED
1924 and should properly handle any size that we can make in the TLBs
1925 we have available to us
1927 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1929 commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
1930 Author: Kumar Gala <galak@kernel.crashing.org>
1931 Date: Fri Feb 6 09:56:34 2009 -0600
1933 fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller
1935 If we only have one controller we can completely ignore how
1936 memctl_intlv_ctl is set. Otherwise other levels of code get confused
1937 and think we have twice as much memory.
1939 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1941 commit b29dee3c906e9daaf6baf7772d2e15e26b8636b8
1942 Author: Kumar Gala <galak@kernel.crashing.org>
1943 Date: Wed Feb 4 09:35:57 2009 -0600
1945 85xx: Format cpu freq printing to handle 8 cores
1947 Only print 4 cpu freq per line. This way when we have 8 cores its a
1950 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1952 commit 9704f9caf53f5cae547d8c5e1ae94aa4e57b160f
1953 Author: Abraham, Thomas <t-abraham@ti.com>
1954 Date: Tue Oct 28 16:51:31 2008 +0530
1956 USB: Remove LUN number from CDB
1958 The LUN number is not part of the Command Descriptor Block (CDB) for scsi inquiry, request sense, test unit ready, read capacity and read10 commands. This patch removes the LUN number information from the CDB.
1960 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
1961 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1963 commit f3c0de636252f3a18654c8f9c6370a9574a7e755
1964 Author: Atin Malaviya <atin.malaviya@gmail.com>
1965 Date: Tue Feb 3 15:17:10 2009 -0500
1967 Added usbtty_configured() check. Fixed attribute(packed) warnings.
1969 V3: Fixed line-wrap problem due to user error in mail!
1971 Added usb_configured() checks in usbtty_puts() and usbtty_putc() to get around a hang
1972 when usb is not connected and the user has set up multi-io (setenv stdout serial,usbtty etc).
1973 Got rid of redundant __attribute__((packed)) directives that were causing warnings from gcc.
1975 Signed-off-by: Atin Malaviya <atin.malaviya@gmail.com>
1976 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1978 commit e7de18afe8ecf96a51ef981d06066eeb6b1254e7
1979 Author: Guennadi Liakhovetski <lg@denx.de>
1980 Date: Fri Feb 13 09:23:36 2009 +0100
1982 i.MX31: Start the I2C clock on driver initialisation
1984 i.MX31 powers on with most clocks running, so, after a power on this explicit
1985 clock start up is not required. However, as Linux boots it disables most clocks
1986 to save power. This includes the I2C clock. If we then soft reboot from Linux
1987 the I2C clock stays off. This breaks the phycore, which has its environment in
1988 I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver
1989 initialisation routine.
1991 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1992 Ack-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1994 commit 15208ac9eae1c340c4bc11f70cbf5c9da78a57ba
1995 Author: Mike Frysinger <vapier@gentoo.org>
1996 Date: Wed Feb 11 20:36:14 2009 -0500
1998 i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts
2000 The Blackfin i2c driver has been rewritten thus the special ifdefs in the
2001 common code are no longer needed.
2003 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2005 commit c2d9befa0b4695b89476fb5d259742c09afe243f
2006 Author: Heiko Schocher <hs@denx.de>
2007 Date: Thu Feb 12 08:08:54 2009 +0100
2009 82xx, mgcoge: fix compile error
2011 With actual u-boot compiling the mgcoge port fails, because
2012 since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is
2013 necessary to define CONFIG_NET_MULTI.
2015 Seems to me the mgcoge port is the only actual existing 8260
2016 port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed
2019 Signed-off-by: Heiko Schocher <hs@denx.de>
2021 commit 9cacf4fc4035eabe9d9ae2a9a188c51a8027c91e
2022 Author: Dirk Eibach <eibach@gdsys.de>
2023 Date: Mon Feb 9 08:18:34 2009 +0100
2025 ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE
2027 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2028 Signed-off-by: Stefan Roese <sr@denx.de>
2030 commit 7369f0e384e2a831be13a7773a58242c9173fa9c
2031 Author: Carolyn Smith <carolyn.smith@tektronix.com>
2032 Date: Thu Feb 12 06:13:44 2009 +0100
2034 ppc4xx: Fix initialization of the SDRAM_CODT register
2036 This fixes the initialization of the SDRAM_CODT register in the ppc4xx DDR2
2037 initialization code. It also removes use of the SDRAM_CODT_FEEDBACK_RCV_SINGLE_END
2038 and SDRAM_CODT_FEEDBACK_DRV_SINGLE_END #define's since they are reserved bits.
2040 Signed-off-by: Carolyn Smith <carolyn.smith@tektronix.com>
2041 Signed-off-by: Stefan Roese <sr@denx.de>
2043 commit cef0efaf2fa55d1f25066cfb02bd984c27f9ca31
2044 Author: Stefan Roese <sr@denx.de>
2045 Date: Wed Feb 11 09:29:33 2009 +0100
2047 ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards
2049 Some AMCC eval boards do have a board_eth_init() function calling
2050 pci_eth_init(). These boards need to call cpu_eth_init() explicitly now
2051 with the new eth_init rework.
2053 Signed-off-by: Stefan Roese <sr@denx.de>
2055 commit c645012aefebb301e6907d148c6c8efacac049d4
2056 Author: Adam Graham <agraham@amcc.com>
2057 Date: Mon Feb 9 13:18:12 2009 -0800
2059 ppc4xx: Autocalibration can set RDCC to over aggressive value.
2061 The criteria of the AMCC SDRAM Controller DDR autocalibration
2062 U-Boot code is to pick the largest passing write/read/compare
2063 window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
2066 On some Kilauea boards the DDR autocalibration algorithm can
2067 find a large passing write/read/compare window with a small
2068 SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
2071 This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
2072 "T1 Sample" proves to be to aggressive when later on U-Boot
2073 relocates into DDR memory and executes.
2075 The memory traces on the Kilauea board are short so on some
2076 Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
2077 value of "T1 Sample" shows up as a potentially valid value for
2078 the DDR autocalibratiion algorithm.
2080 The fix is to define a weak default function which provides
2081 the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
2082 to accept for DDR autocalibration. The default will be the
2083 "T2 Sample" value. A board developer who has a well defined
2084 board and chooses to be more aggressive can always provide
2085 their own board specific string function with the more
2086 aggressive "T1 Sample" value or stick with the default
2087 minimum SDRAM_RDCC.[RDSS] value of "T2".
2089 Also put in a autocalibration loop fix for case where current
2090 write/read/compare passing window size is the same as a prior
2091 window size, then in this case choose the write/read/compare
2092 result that has the associated smallest RDCC T-Sample value.
2094 Signed-off-by: Adam Graham <agraham@amcc.com>
2095 Signed-off-by: Stefan Roese <sr@denx.de>
2097 commit 2ede879fcb67470524847bb4fc8972651bb46184
2098 Author: Stefan Roese <sr@denx.de>
2099 Date: Wed Feb 11 09:37:12 2009 +0100
2101 ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h
2103 CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
2104 included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.
2106 It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
2109 Signed-off-by: Stefan Roese <sr@denx.de>
2111 commit f15c6515fc23f83c51f3de272ca23d86b80e81b1
2112 Author: Wolfgang Denk <wd@denx.de>
2113 Date: Thu Feb 12 00:08:39 2009 +0100
2115 Coding style cleanup; update CHANGELOG
2117 Signed-off-by: Wolfgang Denk <wd@denx.de>
2119 commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
2120 Author: Peter Tyser <ptyser@xes-inc.com>
2121 Date: Fri Jan 30 16:36:40 2009 -0600
2123 Add feature-removal-schedule.txt
2125 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2127 commit 255d28e1642e8fc32a6753226be1a96b481ce111
2128 Author: Heiko Schocher <hs@denx.de>
2129 Date: Tue Feb 10 09:32:38 2009 +0100
2131 8xx serial, smc: Coding-Style cleanup serial SMC driver
2133 Signed-off-by: Heiko Schocher <hs@denx.de>
2135 commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
2136 Author: Heiko Schocher <hs@denx.de>
2137 Date: Tue Feb 10 09:31:47 2009 +0100
2139 8xx serial, smc: add configurable SMC Rx buffer len
2141 This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
2142 With this option it is possible to allow the receive
2143 buffer for the SMC on 8xx to be greater then 1. In case
2144 CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
2147 When defining CONFIG_SYS_SMC_RXBUFLEN also
2148 CONFIG_SYS_MAXIDLE must be defined to setup the maximum
2149 idle timeout for the SMC.
2151 Signed-off-by: Heiko Schocher <hs@denx.de>
2153 commit e915f8bb73d74178bc21d3a457959883b1afd1c0
2154 Author: Mike Frysinger <vapier@gentoo.org>
2155 Date: Thu Feb 5 21:04:36 2009 -0500
2157 common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile
2159 Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
2160 the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb
2161 code in the process.
2163 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2165 commit ab76e9848a1f4db64d14233741d739a3b3360c93
2166 Author: Mike Frysinger <vapier@gentoo.org>
2167 Date: Thu Feb 5 21:04:50 2009 -0500
2169 bzip2: move ifdef handling to Makefile COBJS-$(...)
2171 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2173 commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
2174 Author: Jerry Van Baren <gvb.uboot@gmail.com>
2175 Date: Thu Feb 5 22:18:02 2009 -0500
2177 Fix whitespace damage: double space changed to a tab
2179 At some point an intentional double space at the end of the sentence
2180 got changed into a tab in the GPL header line:
2181 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2183 This patch fixes the damage.
2185 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2187 commit 4f975678de995b55749d5e84590c268972a7c835
2188 Author: Heiko Schocher <hs@denx.de>
2189 Date: Tue Feb 10 09:53:29 2009 +0100
2191 cfi: make flash_get_info() non static
2193 If on your board is more than one flash, you must know
2194 the size of every single flash, for example, for updating
2195 the DTS before booting Linux. So make this function
2196 flash_get_info() extern, and you can have all info
2199 Signed-off-by: Heiko Schocher <hs@denx.de>
2200 Signed-off-by: Stefan Roese <sr@denx.de>
2202 commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
2203 Author: Ben Warren <biggerbadderben@gmail.com>
2204 Date: Thu Feb 5 23:58:25 2009 -0800
2206 net: removed board-specific CONFIGs from MPC5xxx FEC driver
2208 Added new CONFIG options for the three type of MAC-PHY interconnect and
2209 applied them all relevant board config files
2211 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2213 commit 638ed3e296e70fab286d157b7adedaaa4a09a474
2214 Author: Mike Frysinger <vapier@gentoo.org>
2215 Date: Thu Feb 5 21:04:47 2009 -0500
2217 net/sntp.c: move ifdef into Makefile COBJS-$(...)
2219 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2220 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2222 commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
2223 Author: Andy Fleming <afleming@freescale.com>
2224 Date: Tue Feb 3 18:26:41 2009 -0600
2226 tsec: Fix a bug in soft-resetting
2228 SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30
2229 clock cycles, so it's been mostly working. But we had no guarantee, and at
2230 slower bitrates, it's just over a microsecond (over 1000 clock cycles). This
2231 enforces a 2 microsecond gap between assertion and deassertion.
2233 Signed-off-by: Andy Fleming <afleming@freescale.com>
2234 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2236 commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
2237 Author: Simon Munton <simon@nidoran.m5data.com>
2238 Date: Mon Feb 2 09:44:08 2009 +0000
2240 Fix 100Mbs ethernet operation on sh7763 based boards
2242 100Mbs ethernet does not work on sh7763 chips due to the wrong value being
2243 used in the GECMR register. Following diff fixes the problem
2245 Signed-off-by: Simon Munton <simon@nidoran.m5data.com>
2246 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2248 commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
2249 Author: ksi@koi8.net <ksi@koi8.net>
2250 Date: Fri Feb 6 16:27:55 2009 -0800
2252 Fix MPC8260 with ethernet on SCC
2254 This fixes MPC8260 compilation with ethernet on SCC. Probably was a
2255 typo or something...
2257 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
2258 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2260 commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
2261 Author: Heiko Schocher <hs@denx.de>
2262 Date: Fri Jan 30 12:56:15 2009 +0100
2264 82xx serial, smc: Coding-Style cleanup serial SMC driver
2266 Signed-off-by: Heiko Schocher <hs@denx.de>
2268 commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
2269 Author: Heiko Schocher <hs@denx.de>
2270 Date: Fri Jan 30 12:55:38 2009 +0100
2272 82xx serial, smc: add configurable SMC Rx buffer len
2274 This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
2275 With this option it is possible to allow the receive
2276 buffer for the SMC on 82xx to be greater then 1. In case
2277 CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
2280 When defining CONFIG_SYS_SMC_RXBUFLEN also
2281 CONFIG_SYS_MAXIDLE must be defined to setup the maximum
2282 idle timeout for the SMC.
2284 Signed-off-by: Heiko Schocher <hs@denx.de>
2286 commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
2287 Author: Kumar Gala <galak@kernel.crashing.org>
2288 Date: Fri Feb 6 08:08:06 2009 -0600
2290 ppc: Fix roll over bug in flush_cache()
2292 If we call flush_cache(0xfffff000, 0x1000) it would never
2293 terminate the loop since end = 0xffffffff and we'd roll over
2294 our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)
2296 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2298 commit 87c9063963561d3d01064be34d0c30855a56587b
2299 Author: Kumar Gala <galak@kernel.crashing.org>
2300 Date: Thu Feb 5 20:40:58 2009 -0600
2302 ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
2304 Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
2305 between the two current users (lib_ppc/board.c, 44x SPD DDR2).
2307 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2308 Acked-by: Stefan Roese <sr@denx.de>
2310 commit 47d41cc3a11a03c6d56146d056145df73f47eb50
2311 Author: Kumar Gala <galak@kernel.crashing.org>
2312 Date: Thu Feb 5 20:40:57 2009 -0600
2314 Add an architecture specific config.h for common defines
2316 We have common defines that we duplicate in various ways. Having an
2317 arch specific config.h gives us a common location for those defines.
2319 Eventually we should be able to replace this when we have proper
2322 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2324 commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
2325 Author: Becky Bruce <beckyb@kernel.crashing.org>
2326 Date: Tue Feb 3 18:10:56 2009 -0600
2328 mpc8641hpcn: Change PCI MEM pci bus address
2330 Now that the rest of u-boot can support it, change the PCI bus
2331 address of the PCI MEM regions from 0x80000000 to 0xc0000000,
2332 and use the same bus address for both PCI1 and PCI2. This will
2333 maximize the amount of PCI address space left over to map RAM
2334 on systems with large amounts of memory.
2336 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2338 commit 1785dbeed43599eed1d8875673c96912cd770141
2339 Author: Becky Bruce <beckyb@kernel.crashing.org>
2340 Date: Tue Feb 3 18:10:55 2009 -0600
2342 drivers/block/ahci: Fix pci mapping bug
2344 The code assumes that the pci bus address and the virtual
2345 address used to access a region are the same, but they might
2346 not be. Fix this assumption.
2348 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2350 commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
2351 Author: Becky Bruce <beckyb@kernel.crashing.org>
2352 Date: Tue Feb 3 18:10:54 2009 -0600
2354 MPC8641HPCN: Enable CONFIG_ADDR_MAP
2356 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2358 commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
2359 Author: Becky Bruce <beckyb@kernel.crashing.org>
2360 Date: Tue Feb 3 18:10:53 2009 -0600
2362 mpc8641hpcn: Clean up PCI mapping concepts
2364 Clean up PCI mapping concepts in the 8641 config - rename _BASE
2365 to _BUS, as it's actually a PCI bus address, separate virtual
2366 and physical addresses into _VIRT and _PHYS, and use each
2369 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2371 commit c9315e6b4f244981de0b2eaaa29a7838a165b494
2372 Author: Becky Bruce <beckyb@kernel.crashing.org>
2373 Date: Tue Feb 3 18:10:52 2009 -0600
2375 mpc86xx: Add support to populate addr map based on BATs
2377 If CONFIG_ADDR_MAP is enabled, update the address map
2378 whenever we write a bat.
2380 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2382 commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
2383 Author: Becky Bruce <beckyb@kernel.crashing.org>
2384 Date: Tue Feb 3 18:10:51 2009 -0600
2386 powerpc: Move duplicated BAT defines to mmu.h
2388 The BAT fields are architected; there's no need for these to be in
2389 cpu-specific files. Drop the duplication and move these to
2390 include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only
2391 used by the alaska board, and switch to using the BATU_BL_xxx defines
2392 used by all the other boards. The BL_ defines previously in use
2393 had to be shifted into the proper position for use, which was inefficient.
2395 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2397 commit 6e61fae4d360a1380b63e7d007b31477e366bcce
2398 Author: Becky Bruce <beckyb@kernel.crashing.org>
2399 Date: Tue Feb 3 18:10:50 2009 -0600
2401 drivers/pci: Create pci_map_bar function
2403 It is no longer always true that the pci bus address can be
2404 used as the virtual address for pci accesses. pci_map_bar()
2405 is created to return the virtual address for a pci region.
2407 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2409 commit 2ecca3401775b125c3b9ff65766befb23989414b
2410 Author: Becky Bruce <beckyb@kernel.crashing.org>
2411 Date: Tue Feb 3 18:10:49 2009 -0600
2413 mpc8641hpcn: Set up outbound pci windows before inbound
2415 Because the inbound pci windows are mapped generously, set up
2416 the more specific outbound windows first. This way, when we
2417 search the pci regions for something, we will hit on the more
2418 specific region. This can actually be a problem on systems
2419 with large amounts of RAM.
2421 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2423 commit b81b773ead0687114dc8a800f99ea6e504447739
2424 Author: Becky Bruce <beckyb@kernel.crashing.org>
2425 Date: Mon Feb 2 16:34:52 2009 -0600
2427 mpc8641hpcn: Use physical address in flash banks defintion
2429 If the VA and PA of the flash aren't the same, the banks list
2430 should be initialized to hold the physical address. Correct this.
2432 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2434 commit 0d19f6c8cbe71b9e6d8c6bd6742ed2551e918870
2435 Author: Ilya Yanok <yanok@emcraft.com>
2436 Date: Tue Feb 10 00:22:31 2009 +0100
2438 qong: support for Dave/DENX QongEVB-LITE board
2440 This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.
2442 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2443 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2445 commit 62cbc408f52fc9a5eb849e0b882c504780c9d183
2446 Author: Ilya Yanok <yanok@emcraft.com>
2447 Date: Mon Feb 9 18:45:28 2009 +0100
2449 dnet: driver for Dave DNET ethernet controller
2451 Driver for Dave DNET ethernet controller (used on Dave/DENX
2452 QongEVB-LITE board).
2454 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2455 Acked-by: Ben Warren <biggerbadderben@gmail.com>
2457 commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
2458 Author: Kumar Gala <galak@kernel.crashing.org>
2459 Date: Fri Feb 6 09:49:32 2009 -0600
2461 pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching
2463 When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
2464 we should give preference to memory regions that aren't system memory.
2466 Its possible that we have over mapped system memory in the regions and
2467 we want to avoid depending on the order of the regions.
2469 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2471 commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
2472 Author: Kumar Gala <galak@kernel.crashing.org>
2473 Date: Fri Feb 6 09:49:31 2009 -0600
2475 pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
2477 The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
2478 can be confusing when reading the code.
2480 Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
2481 for system memory mapping purposes.
2483 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2485 commit 54dc517328709c204a9cbf7a253d9f8e6c4b26ec
2486 Author: Ilya Yanok <yanok@emcraft.com>
2487 Date: Sun Feb 8 00:59:43 2009 +0300
2489 mx31: add GPIO registers definitions
2491 Added definitions for i.MX31 processor GPIO registers.
2493 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2495 commit 8da601280a8acbc3385784780ed35130e53812f1
2496 Author: Peter Tyser <ptyser@xes-inc.com>
2497 Date: Wed Feb 4 13:47:22 2009 -0600
2499 NAND: Add timeout for reset command
2501 Without the timeout present an infinite loop can occur if the
2502 NAND device is broken or not present.
2504 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2505 Signed-off-by: Scott Wood <scottwood@freescale.com>
2507 commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
2508 Author: Peter Tyser <ptyser@xes-inc.com>
2509 Date: Wed Feb 4 13:39:40 2009 -0600
2511 NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
2513 Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
2514 for disabling the "No NAND device found!!!" warning when
2515 CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support
2516 for silencing the warning.
2518 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2519 Signed-off-by: Scott Wood <scottwood@freescale.com>
2521 commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
2522 Author: Valeriy Glushkov <gvv@lstec.com>
2523 Date: Mon Jan 19 16:32:59 2009 +0200
2525 NAND: Fixed invalid pointers to static relocated chip names
2529 You are right, the patch was ugly.
2530 The new one seems to be better.
2532 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
2533 Signed-off-by: Scott Wood <scottwood@freescale.com>
2535 commit e7deec1bf6fa3b3a21cd8d14fe2a909a42efc9d8
2536 Author: Nishanth Menon <nm@ti.com>
2537 Date: Mon Feb 2 18:20:12 2009 -0600
2539 ARM:OMAP3:Zoom1: Add nand unlock option
2541 Enable NAND_UNLOCK option for unlocking nand for
2542 erase/write operations
2544 Signed-off-by: Nishanth Menon <nm@ti.com>
2546 commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
2547 Author: derek@siconix.com <derek@siconix.com>
2548 Date: Mon Jan 26 14:08:17 2009 -0700
2550 env_nand: fix env memory release
2552 This fixes a bug that tmp environment memory not being released.
2554 Signed-off-by: Derek Ou <dou@siconix.com>
2555 Signed-off-by: Scott Wood <scottwood@freescale.com>
2557 commit 05fd88776419df59e7f37bac063a209409dd801d
2558 Author: Guennadi Liakhovetski <lg@denx.de>
2559 Date: Fri Feb 6 10:37:45 2009 +0100
2561 ARM: remove unused variable
2563 The "size" variable in start_armboot() in lib_arm/board.c is only really
2564 used in "#ifndef CONFIG_SYS_NO_FLASH" case, and even there it can be
2565 eliminated (thanks to Jean-Christophe PLAGNIOL-VILLARD for a suggestion.)
2567 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2569 commit 6989e4f546d960a407dd5425f800dff9751c8132
2570 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2571 Date: Thu Feb 5 09:33:50 2009 -0500
2573 Coldfire: M527x: Add missing GPIO register address defines
2575 Add missing GPIO registers address definition for Coldfire M5271.
2577 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2579 commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
2580 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2581 Date: Fri Jan 23 14:42:58 2009 -0500
2583 Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
2585 Modified mii_init to support boards with PHYs that are not set to
2586 autonegotiate, but still want to use u-boot's mii commands to probe
2587 the smi bus. Such PHYs will not set the Autonegotiate-done bit.
2589 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2591 commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
2592 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2593 Date: Fri Jan 23 11:44:30 2009 -0500
2595 Coldfire: Applied baudrate formula of serial_init to serial_setbrg
2597 Applied the patch for baudrate divider value truncation for
2598 serial_init to serial_setbrg as well.
2600 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2602 commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
2603 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2604 Date: Fri Jan 23 14:07:05 2009 -0500
2606 Coldfire: M5271EVB: Board header update (dependencies)
2608 Cleanup for M5271EVB:
2609 Added clarification on the use of CONFIG_SYS_CLOCK.
2610 Modified to use u-boot's HUSH parser.
2611 Cleanup on environment settings.
2612 Removed compiler warning by defining CONFIG_SYS_CS0_*
2615 Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
2616 This depends on a patch to include/asm-m68k/m5271.h
2617 that defines the multiplier and divider ratios.
2619 Removed the definition of CONFIG_SYS_FECI2C.
2620 This depends on a patch that removes the use of it in
2621 cpu/mcf52x2/cpu_init.c
2623 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2625 commit e0db344fabfeb4f9649846f94838f51172f6a1f6
2626 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2627 Date: Thu Jan 29 14:36:06 2009 -0500
2629 Coldfire: M5271: Allow board header file to specify clock multiplier
2631 M5271 dynamic clock multiplier. It is currently fixed at 100MHz.
2633 Allow the board header file to set their own multiplier and divider.
2634 Added the #define for the multiplier and divider to the cpu header file.
2636 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2638 commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
2639 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2640 Date: Fri Jan 23 10:47:13 2009 -0500
2642 Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
2644 Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
2645 Use read-modify-write to activate the FEC pins without disabling I2C.
2647 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2649 commit ee73cc59ab904976af3c33b454fc84f78618b2d1
2650 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2651 Date: Fri Jan 23 09:45:34 2009 -0500
2653 Coldfire: cmd_bdinfo cleanup
2655 CONFIG_M68K bdinfo cleanup:
2657 Fixed compiler warning about baudrate printing.
2658 format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
2660 Added printing of "cpufreq"
2662 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2664 commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
2665 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2666 Date: Fri Jan 23 09:27:00 2009 -0500
2668 Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
2670 Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
2671 was causing the bus clock (not CPU clock) to be declared twice as
2672 fast as it actually is. This causes UARTS to operate at half the
2675 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2677 commit 59d1bda7f92c8a28c3aba94e48063749d425949f
2678 Author: Dirk Eibach <eibach@gdsys.de>
2679 Date: Tue Feb 3 15:15:21 2009 +0100
2681 ppc4xx: Make PCIE support selectable
2683 On some platforms PCIE support is not required, but would be included
2684 because the cpu supports it. To reduce fooprint it is now configurable
2685 via CONFIG_PCI_DISABLE_PCIE.
2687 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2688 Signed-off-by: Stefan Roese <sr@denx.de>
2690 commit b129eff5ede394cc1faeb6dbf6a987e91abce552
2691 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2692 Date: Tue Feb 3 22:13:16 2009 +0100
2694 ppc4xx: Only fixup opb attached UARTs
2696 This patch updates the fdt UART clock fixup code to
2697 only touch CPU internal UARTs on 4xx systems.
2698 Only these UARTs are definitely clocked by gd->uart_clk.
2700 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2701 Signed-off-by: Stefan Roese <sr@denx.de>
2703 commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
2704 Author: Mike Frysinger <vapier@gentoo.org>
2705 Date: Tue Jan 13 11:00:29 2009 -0500
2707 Blackfin: move default boot SPI CS to common code
2709 Move the default SPI CS that we boot from into common code so that it can
2710 be used in other SPI drivers and environment settings.
2712 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2714 commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
2715 Author: Mike Frysinger <vapier@gentoo.org>
2716 Date: Wed Dec 10 12:33:54 2008 -0500
2718 Blackfin: dynamically update UART speed when initializing
2720 Previously, booting over the UART required the baud rate to be known ahead
2721 of time. Using a bit of tricky simple math, we can calculate the new board
2722 rate based on the old divisors.
2724 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2725 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
2727 commit 97f265f14f23050f3cb997f617f3a6917b843ea2
2728 Author: Mike Frysinger <vapier@gentoo.org>
2729 Date: Tue Dec 9 17:21:08 2008 -0500
2731 Blackfin: add support for fast SPI reads with Boot ROM
2733 Newer Blackfin boot roms support using the fast SPI read command rather than
2734 just the slow one. If the functionality is available, then use it.
2736 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2738 commit 67619982bfc5cd62710a48e3cbffc304cb78c341
2739 Author: Mike Frysinger <vapier@gentoo.org>
2740 Date: Sat Oct 11 21:46:52 2008 -0400
2742 Blackfin: check for reserved settings in DDR MMRs
2744 Some bits of the DDR MMRs should not be set. If they do, bad things may
2745 happen (like random failures or hardware destruction).
2747 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2749 commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
2750 Author: Mike Frysinger <vapier@gentoo.org>
2751 Date: Sat Oct 11 21:54:00 2008 -0400
2753 Blackfin: set default voltage levels for BF538/BF539 parts
2755 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2757 commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
2758 Author: Mike Frysinger <vapier@gentoo.org>
2759 Date: Sun Jun 1 01:29:57 2008 -0400
2761 Blackfin: use on-chip syscontrol() rom function when available
2763 Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
2764 to be used to properly program the memory and voltage settings as it will
2765 include (possibly critical) factory tested bias values.
2767 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2769 commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
2770 Author: Stefan Roese <sr@denx.de>
2771 Date: Thu Feb 5 11:44:52 2009 +0100
2773 cfi_flash: Fix typo in cfi_flash.c
2775 Patch "flash/cfi_flash: Use virtual sector start address, not phys"
2776 introduced a small typo and compilation warning for systems with CFI
2777 legacy support (e.g. hcu4). This patch fixes it.
2779 Signed-off-by: Stefan Roese <sr@denx.de>
2781 commit 28745db969b72693754991c838f68a7fb4a8b1ab
2782 Author: Stefan Roese <sr@denx.de>
2783 Date: Thu Jan 29 11:21:38 2009 +0100
2785 jedec_flash: Only use manufacturer defines from common flash.h
2787 This patch removes the double defined manufacturer defines from
2788 jedec_flash.c. Since the common defines in flash.h are 32bit
2789 we now need the (16) cast. This patch also removes the compilation
2790 warning (e.g. seen on hcu5):
2793 Configuring for hcu5 board...
2794 jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type
2796 Signed-off-by: Stefan Roese <sr@denx.de>
2798 commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
2799 Author: Stefan Roese <sr@denx.de>
2800 Date: Thu Feb 5 11:25:57 2009 +0100
2802 cfi_flash: Silence compilation warning
2804 Patch "flash/cfi_flash: Use virtual sector start address, not phys"
2805 introduced a small compilation warning. This patch fixes it.
2807 Signed-off-by: Stefan Roese <sr@denx.de>
2809 commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
2810 Author: Becky Bruce <beckyb@kernel.crashing.org>
2811 Date: Mon Feb 2 16:34:51 2009 -0600
2813 flash/cfi_flash: Use virtual sector start address, not phys
2815 include/flash.h was commented to say that the address in
2816 flash_info->start was a physical address. However, from u-boot's
2817 point of view, and looking at most flash code, it makes more
2818 sense for this to be a virtual address. So I corrected the
2819 comment to indicate that this was a virtual address.
2821 The only flash driver that was actually treating the address
2822 as physical was the mtd/cfi_flash driver. However, this code
2823 was using it inconsistently as it actually directly dereferenced
2824 the "start" element, while it used map_physmem to get a
2825 virtual address in other places. I changed this driver so
2826 that the code which initializes the info->start field calls
2827 map_physmem to get a virtual address, eliminating the need for
2828 further map_physmem calls. The code is now consistent.
2830 The *only* place a physical address should be used is when defining the
2831 flash banks list that is used to initialize the flash_info struct,
2832 usually found in the board config file.
2834 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2835 Signed-off-by: Stefan Roese <sr@denx.de>
2837 commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
2838 Author: Wolfgang Denk <wd@denx.de>
2839 Date: Wed Feb 4 09:42:20 2009 +0100
2841 Fix compiler warning
2843 (shows up only when DEBUG is enabled)
2845 Signed-off-by: Wolfgang Denk <wd@denx.de>
2847 commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
2848 Author: Mike Frysinger <vapier@gentoo.org>
2849 Date: Mon Oct 6 03:45:55 2008 -0400
2851 Blackfin: update anomaly lists
2853 Update the anomaly lists to match latest anomaly sheets.
2855 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2857 commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
2858 Author: Ralph Kondziella <rk@argos-messtechnik.de>
2859 Date: Mon Jan 26 12:34:36 2009 -0700
2861 ADS5121 Add PATA support
2863 Original patch from Ralph Kondziella
2864 plus clean up by Wolfgang Denk
2865 plus changes by John Rigby
2866 use ips clock not lpc
2867 port forward to current u-boot release
2869 Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
2870 Signed-off-by: Wolfgang Denk <wd@denx.de>
2871 Signed-off-by: John Rigby <jrigby@freescale.com>
2873 commit abfbd0ae4967df18102345db4f4b529a13da107b
2874 Author: Martha Marx <mmarx@silicontkx.com>
2875 Date: Mon Jan 26 10:45:07 2009 -0700
2877 ADS5121 Add IC Ident Module (IIM) support
2879 IIM (IC Identification Module) is the fusebox for the mpc5121.
2880 Use #define CONFIG_IIM to turn on the clock for this module
2881 use #define CONFIG_CMD_FUSE to add fusebox commands.
2882 Fusebox commands include the ability to read
2883 the status, read the register cache, override the register cache,
2884 program the fuses and sense them.
2886 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
2887 Signed-off-by: John Rigby <jrigby@freescale.com>
2889 commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
2890 Author: John Rigby <jrigby@freescale.com>
2891 Date: Fri Jan 23 10:33:15 2009 -0700
2893 ADS5121 Fix rev2 silicon pci iopad config
2895 Reset config is not correct
2897 Signed-off-by: John Rigby <jrigby@freescale.com>
2899 commit 4c154252c480b13f69ce1b71a9530b0515da76a6
2900 Author: John Rigby <jrigby@freescale.com>
2901 Date: Wed Nov 19 13:57:34 2008 -0700
2903 ADS5121 DIU Add diu_bmp_addr env
2905 Add support for using a bmp other than
2906 FSL_Logo_BMP for the DIU splash screen.
2908 Can now set the env var "diu_bmp_addr" to
2909 the address of a BMP in flash to use instead
2910 of the default FSL_Logo_BMP.
2912 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
2913 Signed-off-by: John Rigby <jrigby@freescale.com>
2915 commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
2916 Author: John Rigby <jrigby@freescale.com>
2917 Date: Thu Oct 30 16:39:35 2008 -0600
2919 ADS5121 DIU Make inclusion of FSL logo optional
2921 Make inclusion of FSL logo optional and
2922 turn it off by default.
2924 Signed-off-by: John Rigby <jrigby@freescale.com>
2926 commit bd99ec149abe94e7f6b2bda4766d701b4005053f
2927 Author: Remy Bohmer <linux@bohmer.net>
2928 Date: Sun Feb 1 12:27:53 2009 +0100
2930 Compile warning fix in onenand_uboot.h
2932 Regression since merge window after 2009.01
2934 Signed-off-by: Remy Bohmer <linux@bohmer.net>
2936 commit a270d1e7295c3d829f42c0480117941dfc1c6477
2937 Author: Stefan Roese <sr@denx.de>
2938 Date: Thu Jan 29 06:33:55 2009 +0100
2940 USB: Add EHCI support for VCT EHCI controller (really with driver now)
2942 Somehow I missed the real driver part in my last patch version. This patch
2943 now adds the driver.
2945 Signed-off-by: Stefan Roese <sr@denx.de>
2946 Signed-off-by: Remy Bohmer <linux@bohmer.net>
2948 commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
2949 Author: Cliff Cai <cliff.cai@analog.com>
2950 Date: Sat Nov 29 18:22:38 2008 -0500
2952 Blackfin: add driver for on-chip MMC/SD controller
2954 This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
2956 Signed-off-by: Cliff Cai <cliff.cai@analog.com>
2957 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2959 commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
2960 Author: Mike Frysinger <vapier@gentoo.org>
2961 Date: Sat Oct 11 22:47:34 2008 -0400
2963 Blackfin: add port muxing for BF51x SPI
2965 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2967 commit fc68f9f85959664d528daea2aef5ef54974331ce
2968 Author: Mike Frysinger <vapier@gentoo.org>
2969 Date: Tue Jan 6 06:16:19 2009 -0500
2971 Blackfin: output booting source when booting
2973 Knowing the booting source of the part is useful, especially when the part
2974 can switch dynamically between sources.
2976 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2978 commit 8df3ce0f49c37947800ac7c84e751499882619fc
2979 Author: Mike Frysinger <vapier@gentoo.org>
2980 Date: Thu Dec 11 06:30:46 2008 -0500
2982 Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
2984 Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
2985 the Blackfin on-chip bootrom to boot out of SPI flash.
2987 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2989 commit 2b4a486e6fac502d8b883e344cc4012283945b3d
2990 Author: Mike Frysinger <vapier@gentoo.org>
2991 Date: Thu Dec 11 04:06:26 2008 -0500
2993 Blackfin: update asm-blackfin/posix_types.h to latest Linux version
2995 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2997 commit e5eb93e77391bcc308697116c544ea1340aaae8a
2998 Author: Mike Frysinger <vapier@gentoo.org>
2999 Date: Sat Dec 6 02:54:52 2008 -0500
3001 Blackfin: add port I bits
3003 Some people need to access port I, so make sure the pins are defined.
3005 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3007 commit 8a6b272596d43de0db4943eac7af58c3534c4026
3008 Author: Sonic Zhang <Sonic.Zhang@analog.com>
3009 Date: Wed Nov 26 22:16:45 2008 -0500
3011 Blackfin: add driver for on-chip ATAPI controller
3013 This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
3015 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
3016 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3018 commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
3019 Author: Mike Frysinger <vapier@gentoo.org>
3020 Date: Wed Nov 26 21:43:06 2008 -0500
3022 Blackfin: add driver for on-chip NAND controller
3024 This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
3026 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3028 commit 4148e02abae9a099f4444b5e168ebc2b911d2295
3029 Author: Mike Frysinger <vapier@gentoo.org>
3030 Date: Wed Nov 12 07:18:15 2008 -0500
3032 Blackfin: build with -mno-fdpic
3034 Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
3035 up u-boot, including ones that output FDPIC ELF by default.
3037 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3039 commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
3040 Author: Mike Frysinger <vapier@gentoo.org>
3041 Date: Tue Nov 11 05:43:57 2008 -0500
3043 Blackfin: fix up EBIU defines
3045 The EBIU defines for EBSZ 256/512 were incorrect.
3047 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3049 commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
3050 Author: Mike Frysinger <vapier@gentoo.org>
3051 Date: Wed Nov 5 12:45:24 2008 -0500
3053 Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
3055 Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
3056 as usable with the source/destination addresses and the count size.
3058 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3060 commit b93c68648426f906d63b98117496b6415f505f39
3061 Author: Mike Frysinger <vapier@gentoo.org>
3062 Date: Wed Nov 5 08:50:23 2008 -0500
3064 Blackfin: only flag L1 instruction for DMA memcpy
3066 The performance difference from doing an 8 bit DMA memcpy vs an optimized
3067 core memcpy can be pretty big when you add in the overhead of setting up the
3068 MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
3069 actually require it.
3071 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3073 commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
3074 Author: Mike Frysinger <vapier@gentoo.org>
3075 Date: Wed Nov 5 07:20:37 2008 -0500
3077 Blackfin: dma_memcpy(): fix random failures
3079 We have to make sure the DMA channel is actually disabled in hardware before
3080 attempting to reprogram it. Otherwise the new settings are ignored and we
3081 end up with random hangs/failures.
3083 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3085 commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
3086 Author: Mike Frysinger <vapier@gentoo.org>
3087 Date: Tue Nov 4 00:04:03 2008 -0500
3089 Blackfin: rewrite cache handling functions
3091 Take the cache flush functions from the kernel as they use hardware loops in
3092 order to get optimal performance.
3094 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3096 commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
3097 Author: Mike Frysinger <vapier@gentoo.org>
3098 Date: Mon Nov 3 22:30:05 2008 -0500
3100 Blackfin: setup bi_enetaddr for single nets
3102 For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
3103 based on $ethaddr, so set it up.
3105 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3107 commit 40599239e7875b39e2a5c12e6545992041c72c52
3108 Author: Mike Frysinger <vapier@gentoo.org>
3109 Date: Fri Oct 24 22:48:47 2008 -0400
3111 Blackfin: cache core/system clock values
3113 Calculating the clocks requires a bit of calls to gcc math functions, so
3114 cache the values after the first run since they'll most likely never
3115 change once U-Boot is up and running.
3117 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3119 commit 6957a6209b02f6b69607fc47425f13731cc477f1
3120 Author: Mike Frysinger <vapier@gentoo.org>
3121 Date: Fri Oct 24 18:18:16 2008 -0400
3123 Blackfin: enable --gc-sections
3125 Start building all Blackfin boards with -ffunction-sections/-fdata-sections
3126 and linking with --gc-sections.
3128 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3130 commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
3131 Author: Mike Frysinger <vapier@gentoo.org>
3132 Date: Mon Oct 20 21:08:54 2008 -0400
3134 Blackfin: dont check baud if it wont actually get used
3136 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3138 commit 400f5778f375bc99c73c8488c555def261ccfab7
3139 Author: Mike Frysinger <vapier@gentoo.org>
3140 Date: Tue Oct 14 07:54:09 2008 -0400
3142 Blackfin: add driver for on-chip SPI controller
3144 This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
3146 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3148 commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
3149 Author: Mike Frysinger <vapier@gentoo.org>
3150 Date: Sat Oct 18 05:33:51 2008 -0400
3152 Blackfin: only build post code when CONFIG_POST
3154 Save some time by using CONFIG_POST in the Makefile rather than C files.
3156 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3158 commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
3159 Author: Mike Frysinger <vapier@gentoo.org>
3160 Date: Thu Jan 8 11:57:57 2009 -0500
3162 Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
3164 Redo how pointers are managed to get rid of ugly casts and strict pointer
3165 aliasing issues that are highlighted by gcc 4.3.
3167 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3168 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3170 commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
3171 Author: Mike Frysinger <vapier@gentoo.org>
3172 Date: Tue Dec 9 17:46:21 2008 -0500
3174 Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
3176 No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
3177 does exactly the same thing as common "CONFIG_RMII".
3179 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3180 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3182 commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
3183 Author: Mike Frysinger <vapier@gentoo.org>
3184 Date: Wed Nov 5 06:36:15 2008 -0500
3186 Blackfin: bfin_mac: use common debug()
3188 Rather then defining our own DEBUGF(), just use the common debug().
3190 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3191 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3193 commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
3194 Author: Mike Frysinger <vapier@gentoo.org>
3195 Date: Mon Oct 20 13:59:51 2008 -0400
3197 Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
3199 Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
3200 of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
3202 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3203 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3205 commit ac45af4e63ea925f4accc98453aab1a1166c196d
3206 Author: Mike Frysinger <vapier@gentoo.org>
3207 Date: Tue Oct 14 04:52:00 2008 -0400
3209 Blackfin: bfin_mac: cleanup MII/PHY functions
3211 Cleanup and rewrite the MII/PHY related functions so that we can reuse the
3212 existing common linux/miiphy.h code and hook into the `mii` command.
3214 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3215 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3217 commit 6b310a05f0d10c751f22468040932139f71c71d3
3218 Author: Mike Frysinger <vapier@gentoo.org>
3219 Date: Tue Oct 14 00:31:30 2008 -0400
3221 Blackfin: bfin_mac: set MDCDIV based on SCLK
3223 Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
3224 use the real algorithm so it gets set correctly regardless of SCLK.
3226 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3227 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3229 commit 930590f3e49c8f32256edf2e5861e1535a329c6c
3230 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3231 Date: Sat Jan 31 09:10:48 2009 +0100
3233 ixp: move serial to drivers/serial
3235 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3237 commit f90c8022f448bc5e93090e4b714368e52e912f0f
3238 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3239 Date: Sat Jan 31 09:04:58 2009 +0100
3241 ixp: move pci init in arm/board instead of cpu
3243 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3245 commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
3246 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3247 Date: Sat Jan 31 08:56:49 2009 +0100
3249 ixp: move pci drivers to drivers/pci
3251 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3253 commit 012d5bab09a534e4800b02f50cf508e6837202ea
3254 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3255 Date: Sat Jan 31 08:53:44 2009 +0100
3257 ixp: Move conditional compilation to Makefile
3259 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3261 commit f693f501d67434df1f815fd1824a71973ae08207
3262 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3263 Date: Sat Jan 31 08:53:44 2009 +0100
3265 ixp: add missing os define
3267 need by arm-elf toolchains and no impact on the arm-linux one
3269 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3271 commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
3272 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3273 Date: Sat Jan 31 09:53:39 2009 +0100
3275 ixp: remove the option to include the Microcode
3277 instead the board will have to load it from flash or ram
3278 which will be specified by npe_ucode env var
3280 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3282 commit 1b017baf2071d8daf643bce87250db898c606c66
3283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3284 Date: Fri Jan 30 09:45:23 2009 +0100
3286 ixp/npe: Move conditional compilation to Makefile
3288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3290 commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
3291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3292 Date: Wed Jan 28 21:58:04 2009 +0100
3294 SX1: add hardware V2 support
3296 In the V2 the 2 flash has been replace by one 32MB flash
3298 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3300 commit f877f2233dbcd7417c2f0babe6a849099b167f3c
3301 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3302 Date: Wed Jan 28 21:58:03 2009 +0100
3304 SX1: Fix second flash mapping
3306 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3308 commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
3309 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3310 Date: Wed Jan 28 21:58:03 2009 +0100
3312 SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
3314 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3316 commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
3317 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3318 Date: Wed Jan 28 21:57:59 2009 +0100
3320 move Samsung's board to board/samsung
3322 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3324 commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
3325 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3326 Date: Thu Jan 29 12:07:21 2009 +0100
3328 move ARM Ltd. to vendor dir
3330 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3332 commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
3333 Author: Larry Johnson <lrj@acm.org>
3334 Date: Wed Jan 28 15:30:37 2009 -0500
3336 ppc4xx: Clean up configuration file for Korat board
3338 This patch updates the default environmental variables for the
3339 Korat PPC 440EPx board, and makes additional minor fixes.
3341 Signed-off-by: Larry Johnson <lrj@acm.org>
3342 Signed-off-by: Stefan Roese <sr@denx.de>
3344 commit f20405e31680efc36293c59b4963db57c9d93df4
3345 Author: Larry Johnson <lrj@acm.org>
3346 Date: Wed Jan 28 15:30:02 2009 -0500
3348 ppc4xx: Add variable "korat_usbcf" for Korat board
3350 The new environment variable "korat_usbcf" selects the USB
3351 port used by the Korat board's CompactFlash controller.
3353 Signed-off-by: Larry Johnson <lrj@acm.org>
3354 Signed-off-by: Stefan Roese <sr@denx.de>
3356 commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
3357 Author: Gunnar Rangoy <gunnar@rangoy.com>
3358 Date: Fri Jan 23 12:56:31 2009 +0100
3360 AVR32: macb - Search for PHY id
3362 This patch adds support for searching through available PHY-addresses in
3363 the macb-driver. This is needed for the ATEVK1100 evaluation board,
3364 where the PHY-address will be initialized to either 1 or 7.
3366 This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
3367 enabled tells the driver to search for the PHY address.
3369 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
3370 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
3371 Signed-off-by: Olav Morken <olavmrk@gmail.com>
3372 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3374 commit af8626e0c08a780d9ded1d9c4883a89355f60e75
3375 Author: Olav Morken <olavmrk@gmail.com>
3376 Date: Fri Jan 23 12:56:26 2009 +0100
3378 Fix IP alignment problem
3380 This patch removes volatile from:
3381 volatile IP_t *ip = (IP_t *)xip;
3383 Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
3384 using volatile, which causes an exception since xip isn't aligned on a word
3387 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
3388 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
3389 Signed-off-by: Olav Morken <olavmrk@gmail.com>
3390 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3392 commit 12a8b9db12f82a189ff143a58731007f5469da61
3393 Author: Ron Madrid <ron_madrid@sbcglobal.net>
3394 Date: Wed Jan 28 16:17:21 2009 -0800
3396 Marvell 88E1118 interrupt fix
3398 This patch adjusts the LED control so that interrupt lines are not reading LEDs
3399 and effectively causing indefinite interrupts to the controller.
3401 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
3402 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3404 commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
3405 Author: Stefan Roese <sr@denx.de>
3406 Date: Wed Jan 21 17:14:26 2009 +0100
3408 net: smc911x.c: Add LAN9211 to chip_ids[] array
3410 Signed-off-by: Stefan Roese <sr@denx.de>
3411 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3413 commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
3414 Author: Mike Frysinger <vapier@gentoo.org>
3415 Date: Tue Jan 27 16:53:39 2009 -0500
3417 Move is_valid_ether_addr() to include/net.h
3419 Import the is_valid_ether_addr() function from the Linux kernel.
3421 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3422 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3424 commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
3425 Author: Michal Simek <monstr@monstr.eu>
3426 Date: Mon Jan 5 12:25:13 2009 +0100
3428 net: Sort Makefile labels
3430 Signed-off-by: Michal Simek <monstr@monstr.eu>
3431 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3433 commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
3434 Author: Wolfgang Denk <wd@denx.de>
3435 Date: Wed Jan 28 23:06:42 2009 +0100
3437 85xx: Fix compile breakage with sbc8540 and sbc8560
3439 This fixes an error which raises just a warning:
3440 sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
3442 Signed-off-by: Wolfgang Denk <wd@denx.de>
3444 commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
3445 Author: Mike Frysinger <vapier@gentoo.org>
3446 Date: Wed Jan 28 13:48:55 2009 -0500
3448 SPD823TS: do not define CONFIG_CMD_ENV
3450 Since the SPD823TS board does not actually have any writable flash to save
3451 its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
3454 This fixes the build error:
3455 common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
3456 common/cmd_nvedit.c:557: undefined reference to `saveenv'
3457 make: *** [u-boot] Error 1
3459 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3461 commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
3462 Author: Dirk Behme <dirk.behme@googlemail.com>
3463 Date: Wed Jan 28 21:40:16 2009 +0100
3465 OMAP3: Add Zoom1 board support
3467 Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
3468 http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
3470 Signed-off-by: Nishanth Menon <nm@ti.com>
3471 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
3473 commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
3474 Author: Dirk Behme <dirk.behme@googlemail.com>
3475 Date: Wed Jan 28 21:39:58 2009 +0100
3477 OMAP3: Add Pandora support
3479 Add Pandora support.
3481 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
3482 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
3483 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
3485 commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
3486 Author: Dirk Behme <dirk.behme@googlemail.com>
3487 Date: Wed Jan 28 21:39:58 2009 +0100
3489 OMAP3: Add EVM board
3491 Add EVM board support.
3493 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
3494 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
3495 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
3497 commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
3498 Author: Dirk Behme <dirk.behme@googlemail.com>
3499 Date: Wed Jan 28 21:39:57 2009 +0100
3501 OMAP3: Add Overo board
3503 Add Overo board support.
3505 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
3506 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
3507 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
3509 commit f904cdbb68167c647887f19929ad295dbaac8862
3510 Author: Dirk Behme <dirk.behme@googlemail.com>
3511 Date: Tue Jan 27 18:19:12 2009 +0100
3513 OMAP3: Add common power code, README, and BeagleBoard
3515 Add BeagleBoard support, common power code and README.
3517 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
3518 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
3520 commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
3521 Author: Kumar Gala <galak@kernel.crashing.org>
3522 Date: Wed Jan 28 08:31:10 2009 -0600
3524 85xx: Fix compile breakage with MPC8540EVAL
3526 Configuring for MPC8540EVAL board...
3527 mpc8540eval.c: In function 'checkboard':
3528 mpc8540eval.c:53: error: invalid operands to binary /
3529 make[1]: *** [mpc8540eval.o] Error 1
3531 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3533 commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
3534 Author: Bryan Wu <bryan.wu@analog.com>
3535 Date: Sun Jan 18 23:04:27 2009 -0500
3537 usb_scan_devices: fix output with no devices
3539 We should check the return of usb_new_device() so that if no USB device is
3540 found, we print out the right message rather than always saying "new usb
3543 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
3544 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3545 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3547 commit f1c1f540243438246aefb703fdcf16957e3a72e1
3548 Author: Stefan Roese <sr@denx.de>
3549 Date: Thu Jan 22 10:11:21 2009 +0100
3551 USB: Add high-speed (480Mb/s) to all USB related outputs
3553 With this patch the USB related connection speed output ("usb tree" command and
3554 debug output) is now high-speed enabled.
3556 This patch also fixes a compilation warning when debugging is enabled.
3558 Signed-off-by: Stefan Roese <sr@denx.de>
3559 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3561 commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
3562 Author: Stefan Roese <sr@denx.de>
3563 Date: Wed Jan 21 17:12:19 2009 +0100
3565 USB: Add dcache support to the EHCI driver
3567 This patch adds routines to handle (flush/invalidate) the dcache for the
3568 QH and qTD structures and data buffers. This is needed on platforms using
3569 this EHCI support with dcache enabled (like the MIPS VCT board port).
3571 Signed-off-by: Stefan Roese <sr@denx.de>
3572 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3574 commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
3575 Author: Stefan Roese <sr@denx.de>
3576 Date: Wed Jan 21 17:12:28 2009 +0100
3578 USB: Add EHCI support for VCT EHCI controller
3580 Signed-off-by: Stefan Roese <sr@denx.de>
3581 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3583 commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
3584 Author: Stefan Roese <sr@denx.de>
3585 Date: Wed Jan 21 17:12:10 2009 +0100
3587 USB: Add config option to call ehci_hcd_init() again after EHCI reset
3589 This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
3590 to call ehci_hcd_init() again after ehci_reset() is executed. This
3591 is needed for the upcoming VCT EHCI support which needs to re-init
3592 the hcd part again after the EHCI CMD_RESET is executed.
3594 Signed-off-by: Stefan Roese <sr@denx.de>
3595 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3597 commit 597eb28bd9691266b7b804364cda577cdb51d106
3598 Author: Stefan Roese <sr@denx.de>
3599 Date: Wed Jan 21 17:12:01 2009 +0100
3601 USB: Fix speed detection on EHCI cntr with root hub transaction translators
3603 This patch fixes an issue that the speed of USB devices was not detected
3604 correctly on some EHCI controllers. This will be used on the upcoming VCT
3607 Signed-off-by: Stefan Roese <sr@denx.de>
3608 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3610 commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
3611 Author: Thomas Abraham <t-abraham@ti.com>
3612 Date: Sun Jan 4 09:41:20 2009 +0530
3614 usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
3616 Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
3619 Signed-off-by: Ravi Babu <ravibabu@ti.com>
3620 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
3621 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
3622 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
3623 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3625 commit 538ef967715322f64ee08efa2296d9682111b014
3626 Author: Thomas Abraham <t-abraham@ti.com>
3627 Date: Sun Jan 4 09:41:16 2009 +0530
3629 usb : musb : Enabling DM6446 (TI DaVinci) USB module power
3631 Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
3632 controller hook up to USB core layer.
3634 Signed-off-by: Ravi Babu <ravibabu@ti.com>
3635 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
3636 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
3637 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
3638 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3640 commit e142e9f35f8ec61e74bf8019428b003f5070c33b
3641 Author: Thomas Abraham <t-abraham@ti.com>
3642 Date: Sun Jan 4 09:41:13 2009 +0530
3644 usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
3646 Adding DM6446 (TI DaVinci) platform specific USB functionality for
3647 USB Phy and VBUS initialization.
3649 Signed-off-by: Ravi Babu <ravibabu@ti.com>
3650 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
3651 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
3652 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
3653 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3655 commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
3656 Author: Thomas Abraham <t-abraham@ti.com>
3657 Date: Sun Jan 4 09:41:09 2009 +0530
3659 usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
3661 Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
3664 Signed-off-by: Ravi Babu <ravibabu@ti.com>
3665 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
3666 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
3667 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
3668 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3670 commit a142896934c755e679ba87e227a8e449f39b0012
3671 Author: Thomas Abraham <t-abraham@ti.com>
3672 Date: Sun Jan 4 09:41:03 2009 +0530
3674 usb : musb : Adding host controller driver for Mentor USB controller
3676 Adding Mentor USB core functionality and Mentor USB Host controller
3677 functionality for Mentor USB OTG controller (musbhdrc).
3679 Signed-off-by: Ravi Babu <ravibabu@ti.com>
3680 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
3681 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
3682 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
3683 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3685 commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
3686 Author: Mike Frysinger <vapier@gentoo.org>
3687 Date: Thu Jan 1 18:27:27 2009 -0500
3689 usb.h: use standard __LITTLE_ENDIAN from Linux headers
3691 Rather than forcing people to define a custom "LITTLEENDIAN", just use the
3692 __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
3695 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3696 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3698 commit 7b6e31eb17e3ff76238a60803fc531517d516223
3699 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3700 Date: Wed Dec 31 10:33:56 2008 +0100
3702 USB ehci ixp4xx support
3704 Add USB ehci ixp4xx host controller. Test on ixdp465 board.
3706 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3707 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3709 commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
3710 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3711 Date: Wed Dec 31 10:33:22 2008 +0100
3713 USB ehci remove infinite loop and use handshake function
3715 USB ehci code cleanup. Use handshake instead of infinite while loop
3716 to check the STD_ASS status
3718 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3719 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3721 commit 8fea2914ac974029b65926ef8247d908f84d202d
3722 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3723 Date: Wed Dec 31 10:32:41 2008 +0100
3725 Add initial support for USB ehci pci
3727 Add USB ehci pci support. This patch doesn't include any
3728 pci_ids and it is not tested on real hardware.
3730 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3731 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3733 commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
3734 Author: Bryan Wu <Bryan.Wu@analog.com>
3735 Date: Thu Jan 1 19:48:07 2009 -0500
3737 usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
3739 The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
3740 does not like to be reset, so check for it.
3742 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
3743 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3744 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3746 commit 1eb734fed3b79a5e6106dad16e88041894fdab30
3747 Author: Thomas Abraham <t-abraham@ti.com>
3748 Date: Sun Jan 4 12:15:35 2009 +0530
3750 usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
3752 This patch populates the 'priv' field of the USB keyboard device_t
3753 structure. The 'priv' field is populated with the address of the
3754 'struct usb_device' structure that represents the USB device.
3756 The 'priv' field can then be used in the 'usb_event_poll' function to
3757 determine the USB device that requires to be polled. An
3758 example of its usage in 'usb_event_poll' function is as below.
3761 struct usb_device *usb_kbd_dev;
3765 dev = device_get_by_name("usbkbd");
3766 usb_kbd_dev = (struct usb_device *)dev->priv;
3767 iface = &usb_kbd_dev->config.if_desc[0];
3769 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
3770 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3772 commit 366523c26b6320af171459b19e6e0e9e3baa83ca
3773 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3774 Date: Thu Dec 18 10:05:37 2008 +0100
3778 USB changes the speed according to the port status
3780 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3781 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3783 commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
3784 Author: Remy Böhmer <linux@bohmer.net>
3785 Date: Sat Dec 13 22:51:58 2008 +0100
3787 EHCI fix code and ixp4xx test.
3788 USB ehci configuration parameter:
3790 #define CONFIG_CMD_USB 1
3791 #define CONFIG_USB_STORAGE 1
3792 #define CONFIG_USB_EHCI
3793 #define CONFIG_USB_EHCI_IXP4XX 1
3794 #define CONFIG_EHCI_IS_TDI 1
3795 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1
3796 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
3797 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
3798 #define CONFIG_LEGACY_USB_INIT_SEQ 1
3800 2 USB Device(s) found
3801 scanning bus for storage devices... 0 Storage Device(s) found
3805 1 Hub (1.5MBit/s, 0mA)
3806 | u-boot EHCI Host Controller
3808 |+-2 Mass Storage (12MBit/s, 100mA)
3809 Sony Storage Media 0C07040930296
3813 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3814 Signed-off-by: Remy Böhmer <linux@bohmer.net>
3816 commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
3817 Author: michael <michael@panicking.retis>
3818 Date: Thu Dec 11 13:43:55 2008 +0100
3820 [PATCH] This patch add varius fix to the ehci.
3821 - fix ehci_readl, ehci_writel
3822 - introduce new define in ehci.h
3823 - introduce the handshake function for waiting on a register
3824 - fix usb_ehci_fsl with the new HC_LENGTH macro
3826 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3827 Signed-off-by: Remy Böhmer <linux@bohmer.net>
3829 commit db63299b1dd2894ade542278210bccd046de6435
3830 Author: michael <michael@panicking.retis>
3831 Date: Wed Dec 10 17:55:19 2008 +0100
3833 [PATCH] Fix EHCI usb. I start to test on a
3834 IXP465 board and I find some errors in the code. This
3836 - descriptor initizialization (config, interface and endpoint
3837 must be one next-to the other when the USB_DT_CONFIG message
3839 - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
3840 and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
3841 - Introduce the linux version of the usb_config_descriptor and
3842 usb_interface descriptor. This descriptor does't contains
3845 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3846 Signed-off-by: Remy Böhmer <linux@bohmer.net>
3848 commit 6b92487dcf9afe83a3570153d66940fdb293be76
3849 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3850 Date: Fri Nov 28 13:22:09 2008 +0100
3852 USB ehci freescale support
3854 Add USB ehci freescale support
3856 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3857 Signed-off-by: Remy Böhmer <linux@bohmer.net>
3859 commit aaf098cfeed04595d4c5100ffd39095d79edbf90
3860 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3861 Date: Fri Nov 28 13:20:46 2008 +0100
3863 USB ehci core support
3865 Add USB ehci core support
3867 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3868 Signed-off-by: Remy Böhmer <linux@bohmer.net>
3870 commit 3e126484df7868e341545cce740b24b62b0cd3b7
3871 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3872 Date: Fri Nov 28 13:19:19 2008 +0100
3874 Prepare USB layer for ehci
3876 Prepare USB layer for ehci support
3878 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3879 Signed-off-by: Remy Böhmer <linux@bohmer.net>
3881 commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
3882 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
3883 Date: Wed Dec 10 15:52:06 2008 +0100
3885 USB storage cleanup patch
3889 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
3890 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3892 commit fe033ad6d0883063fe857237abb9436fab03208c
3893 Author: Mike Frysinger <vapier@gentoo.org>
3894 Date: Sun Oct 12 06:02:55 2008 -0400
3896 Blackfin: fixup misc warnings such as printf's and missing casts
3898 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3900 commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
3901 Author: Mike Frysinger <vapier@gentoo.org>
3902 Date: Sun Oct 12 22:09:26 2008 -0400
3904 Blackfin: convert old boards to use COBJS-y Makefile style
3906 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3908 commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
3909 Author: Mike Frysinger <vapier@gentoo.org>
3910 Date: Sat Oct 11 22:38:37 2008 -0400
3912 Blackfin: bf533-stamp: rewrite resource swap logic
3914 The old swap function tended to clobber unrelated pins and screw up masks.
3915 Rewrite the thing from scratch so it only uses the resources it needs.
3917 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3919 commit 29d4ea0a9073c82469184331010136f52edf8db6
3920 Author: Mike Frysinger <vapier@gentoo.org>
3921 Date: Sat Oct 11 22:08:42 2008 -0400
3923 Blackfin: bootldr: implement BF53x/BF56x LDR loader
3925 The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
3926 arbitrary memory locations, so implement a basic one in software.
3928 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3930 commit 8b35e3aeff6c2d747c37697997b3f8a808432329
3931 Author: Mike Frysinger <vapier@gentoo.org>
3932 Date: Sat Oct 11 22:05:42 2008 -0400
3934 Blackfin: implement real write support for OTP
3936 Now that real documentation has been released for the OTP interface and
3937 the on-chip ROM wrt writing/timings, implement support for reading/writing
3938 as well as dumping/locking.
3940 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3942 commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
3943 Author: Mike Frysinger <vapier@gentoo.org>
3944 Date: Sat Oct 11 22:04:05 2008 -0400
3946 Blackfin: update on-chip ROM API
3948 This brings the API for the on-chip ROM in line with the toolchain and
3949 hardware documentation.
3951 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3953 commit 7633903bff432ec7b27905dce7396958553f2be6
3954 Author: Mike Frysinger <vapier@gentoo.org>
3955 Date: Sat Oct 11 21:52:17 2008 -0400
3957 Blackfin: allow serial console to be disabled
3959 Some devices have no UART device pulled out, so allow people to disable the
3960 driver completely in favor of other methods (like JTAG-console).
3962 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3964 commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
3965 Author: Mike Frysinger <vapier@gentoo.org>
3966 Date: Sat Oct 11 21:51:20 2008 -0400
3968 Blackfin: support console-over-JTAG
3970 The Blackfin JTAG has the ability to pass data via a back-channel without
3971 halting the processor. Utilize that channel to emulate a console.
3973 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3975 commit cf8f2efb5f39c5225da92391c14a07eecbeca881
3976 Author: Mike Frysinger <vapier@gentoo.org>
3977 Date: Sat Oct 11 21:49:06 2008 -0400
3979 Blackfin: handle new anomalies with reset
3981 Workaround fun new anomalies related to software reset of the processor.
3983 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3985 commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
3986 Author: Mike Frysinger <vapier@gentoo.org>
3987 Date: Sat Oct 11 21:44:00 2008 -0400
3989 Blackfin: pass RETX to Linux
3991 Make sure we save the value of RETX at power on and then pass it on to the
3992 kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
3994 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3996 commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
3997 Author: Mike Frysinger <vapier@gentoo.org>
3998 Date: Sat Oct 11 21:40:26 2008 -0400
4000 Blackfin: clarify relocation comment during init
4002 People often ask questions about the init process and when things go
4003 from flash to relocated base, so clarify the comments a bit.
4005 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4007 commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
4008 Author: Mike Frysinger <vapier@gentoo.org>
4009 Date: Sat Oct 11 21:23:41 2008 -0400
4011 Blackfin: just set SP register directly during init
4013 No need to set the SP register indirectly to the configured value when it
4014 can be set directly.
4016 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4018 commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
4019 Author: Mike Frysinger <vapier@gentoo.org>
4020 Date: Sat Oct 11 21:15:53 2008 -0400
4022 Blackfin: add portmuxing for UARTs on the BF51x
4024 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4026 commit 4f6a313240c531042f16909a3a170ab047b95779
4027 Author: Mike Frysinger <vapier@gentoo.org>
4028 Date: Sun Jun 1 01:26:29 2008 -0400
4030 Blackfin: respect CONFIG_CLKIN_HALF
4032 As pointed out by Ivan Koryakovskiy, the initialization code was not
4033 actually respecting the CONFIG_CLKIN_HALF option when configuring the
4036 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4038 commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
4039 Author: Mike Frysinger <vapier@gentoo.org>
4040 Date: Sun Jun 1 01:21:34 2008 -0400
4042 Blackfin: use common memcpy routine during init
4044 Rather than using a local custom memcpy function, just call the existing
4045 optimized Blackfin version.
4047 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4049 commit 362c943347364e9373af4c5530778491ab56ec2e
4050 Author: Mike Frysinger <vapier@gentoo.org>
4051 Date: Wed Apr 9 02:27:06 2008 -0400
4053 Blackfin: set default boot SPI CS for BF538/BF539
4055 The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
4058 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4060 commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
4061 Author: Mike Frysinger <vapier@gentoo.org>
4062 Date: Wed Apr 9 02:20:59 2008 -0400
4064 Blackfin: punt unused BF533-STAMP definitions
4066 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4068 commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
4069 Author: Mike Frysinger <vapier@gentoo.org>
4070 Date: Fri Apr 18 20:44:11 2008 -0400
4072 Blackfin: resurrect BF533-STAMP video splash driver
4074 This video driver used to live in the Blackfin cpu directory, but it was
4075 lost during the unification process. This brings it back.
4077 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4079 commit a750d038f2548d846ea1e046d873dc932d041319
4080 Author: Mike Frysinger <vapier@gentoo.org>
4081 Date: Wed Apr 9 02:31:29 2008 -0400
4083 Blackfin: tighten up post memory coding style
4085 No functional changes here; just cleanup code style a bit.
4087 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4089 commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
4090 Author: Mike Frysinger <vapier@gentoo.org>
4091 Date: Wed Apr 9 02:29:18 2008 -0400
4093 Blackfin: bf537-stamp nand: fix more style errors in previous commit
4095 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4097 commit 41f3325ae9add641036d7cb362e884b698e53f07
4098 Author: Mike Frysinger <vapier@gentoo.org>
4099 Date: Sat Oct 11 20:31:17 2008 -0400
4101 Blackfin: drop dead/wrong debug code in initdram()
4103 The DEBUG code in initdram() is quite old and was never really useful, so
4104 just drop it altogether. Common Blackfin debug code does a better job.
4106 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4108 commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
4109 Author: Mike Frysinger <vapier@gentoo.org>
4110 Date: Sat Oct 11 20:30:28 2008 -0400
4112 Blackfin: bf533-ezkit: shuffle flash defines a little
4114 Some of the flash defines weren't in the correct location and caused build
4115 problems in some configurations, so let's move types and defines to better
4118 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4120 commit be853bf86b41e91f4c422f0f56fdf87ea3191266
4121 Author: Mike Frysinger <vapier@gentoo.org>
4122 Date: Mon Oct 6 04:16:47 2008 -0400
4124 Blackfin: overhaul i2c driver
4126 The current Blackfin i2c driver does not work properly with certain devices
4127 due to it breaking up transfers incorrectly. This is a rewrite of the
4128 driver and relocates it to the newer place in the source tree.
4130 Also remove duplicated I2C speed defines in Blackfin board configs and
4131 disable I2C slave address usage since it isn't implemented.
4133 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4135 commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
4136 Author: Mike Frysinger <vapier@gentoo.org>
4137 Date: Mon Oct 6 04:00:07 2008 -0400
4139 Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
4141 Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
4142 128kB when setting up the default flash protection region for U-Boot
4145 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4147 commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
4148 Author: Mike Frysinger <vapier@gentoo.org>
4149 Date: Mon Oct 6 03:57:39 2008 -0400
4151 Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
4153 When setting up the global data, rather than relying on sizeof(), use the
4154 common CONFIG_SYS_GBL_DATA_SIZE define.
4156 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4158 commit 01815c2d06c5b838f2cd536703e47bd2c9148194
4159 Author: Mike Frysinger <vapier@gentoo.org>
4160 Date: Mon Oct 6 03:52:24 2008 -0400
4162 Blackfin: implement general support for CONFIG_STATUS_LED
4164 Here are the Blackfin-specific and board-independent pieces for status leds.
4166 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4168 commit 6882b5a79a3247494b62c05015fa672557f1bfaa
4169 Author: Mike Frysinger <vapier@gentoo.org>
4170 Date: Mon Oct 6 03:49:32 2008 -0400
4172 Blackfin: do not init i2c in Blackfin board init
4174 The common code takes care of calling i2c_init() when needed, so no point
4175 in us doing it as well.
4177 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4179 commit 1118ea73698eee6e72ef5cbfc00e41746040304f
4180 Author: Mike Frysinger <vapier@gentoo.org>
4181 Date: Mon Oct 6 03:42:20 2008 -0400
4183 Blackfin: bfin_mac: update port muxing
4185 Adds support more Blackfin parts and fixes broken muxing for older ones.
4187 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4189 commit 05b75e48832fc4afeecf8e76d704349557dffa35
4190 Author: Mike Frysinger <vapier@gentoo.org>
4191 Date: Mon Oct 6 03:35:44 2008 -0400
4193 Blackfin: fix dcache handling when doing dma memcpy's
4195 Our dcache invalidate function doesn't just invalidate, it also flushes.
4196 So rename the function accordingly and fix the dma_memcpy() function so it
4197 doesn't inadvertently corrupt the data destination.
4199 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4201 commit 68e5632494168095d75f120af70043b68afd2476
4202 Author: Mike Frysinger <vapier@gentoo.org>
4203 Date: Thu Aug 7 18:56:56 2008 -0400
4205 Blackfin: dont generate ldrs with --force
4207 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4209 commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
4210 Author: Mike Frysinger <vapier@gentoo.org>
4211 Date: Thu Aug 7 18:55:30 2008 -0400
4213 Blackfin: pass --bmode/--initcode when creating ldr
4215 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4217 commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
4218 Author: Mike Frysinger <vapier@gentoo.org>
4219 Date: Thu Aug 7 18:39:27 2008 -0400
4221 Blackfin: minimize time cache is turned off when replacing cplb entries
4223 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4225 commit 21d631360430cf0ae9099612273cd4de28911ba9
4226 Author: Mike Frysinger <vapier@gentoo.org>
4227 Date: Thu Aug 7 15:31:13 2008 -0400
4229 Blackfin: split cache handling out of dma_memcpy()
4231 Creating a new dma_memcpy() function that skips all cache checks allows us
4232 to use the function in very early init where the cache is not yet setup.
4234 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4236 commit d31eb38512bed377d5d4b3c696662e52120a2e4c
4237 Author: Mike Frysinger <vapier@gentoo.org>
4238 Date: Thu Aug 7 15:30:49 2008 -0400
4240 Blackfin: abort dma_memcpy() for L1 scratchpad
4242 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4244 commit 81b799add709177e838466461f7b9989488b0fd5
4245 Author: Mike Frysinger <vapier@gentoo.org>
4246 Date: Thu Aug 7 15:27:52 2008 -0400
4248 Blackfin: rename bootm.c to boot.c
4250 The boot file contains functions for more than just "bootm", so rename it
4253 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4255 commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
4256 Author: Mike Frysinger <vapier@gentoo.org>
4257 Date: Thu Aug 7 13:22:37 2008 -0400
4259 Blackfin: set more sane default board config values
4261 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4263 commit 36cd52a00794fb15ffab05d640acca92d7482993
4264 Author: Mike Frysinger <vapier@gentoo.org>
4265 Date: Thu Aug 7 15:24:59 2008 -0400
4267 Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
4269 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4271 commit c8054bc12e00669bd7588f2b30fef48aa94babac
4272 Author: Mike Frysinger <vapier@gentoo.org>
4273 Date: Thu Aug 7 13:21:27 2008 -0400
4275 Blackfin: add bit defines for DDR parts
4277 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4279 commit 154502fe0796f3b7a4698378c5d2080ae28a9782
4280 Author: Mike Frysinger <vapier@gentoo.org>
4281 Date: Thu Aug 7 13:21:11 2008 -0400
4283 Blackfin: add defines to describe active bootrom behavior
4285 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4287 commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
4288 Author: Kim Phillips <kim.phillips@freescale.com>
4289 Date: Tue Jan 27 16:03:53 2009 -0600
4291 mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
4293 extend commit c70564e6b1bd08f3230182392238907f3531a87e
4294 "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
4295 to the simpc8313 build and fix this:
4297 ...Large Page NAND...Configuring for SIMPC8313 board...
4298 nand_boot_fsl_elbc.o: In function `nand_boot':
4299 nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
4300 make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
4301 make: *** [nand_spl] Error 2
4303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4305 commit 54a7cc4912feefa45be961cc47cc159563725d2f
4306 Author: Wolfgang Denk <wd@denx.de>
4307 Date: Wed Jan 28 09:25:31 2009 +0100
4309 mpc8536ds.c: include sata.h to for needed function prototypes
4311 Signed-off-by: Wolfgang Denk <wd@denx.de>
4313 commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
4314 Author: Peter Tyser <ptyser@xes-inc.com>
4315 Date: Tue Jan 27 18:03:12 2009 -0600
4317 Command usage cleanup
4319 Remove command name from all command "usage" fields and update
4320 common/command.c to display "name - usage" instead of
4321 just "usage". Also remove newlines from command usage fields.
4323 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4325 commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
4326 Author: Peter Tyser <ptyser@xes-inc.com>
4327 Date: Tue Jan 27 18:03:11 2009 -0600
4329 amcc: Clean up command usage output
4331 Update taihu and taishan commands to use cmd_usage() function
4332 to display usage messages.
4334 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4336 commit 62c3ae7c6ef215b1afa614abdf61acf077752207
4337 Author: Peter Tyser <ptyser@xes-inc.com>
4338 Date: Tue Jan 27 18:03:10 2009 -0600
4340 Standardize command usage messages with cmd_usage()
4342 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4344 commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
4345 Author: Peter Tyser <ptyser@xes-inc.com>
4346 Date: Tue Jan 27 18:03:09 2009 -0600
4348 pcs440ep: Clean up led command definition
4350 The pcs440ep's led command usage formatting is non-standard. It
4351 was made standard in preparation for larger command usage updates.
4353 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4355 commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
4356 Author: Peter Tyser <ptyser@xes-inc.com>
4357 Date: Tue Jan 27 18:03:08 2009 -0600
4359 Clean up diufb command definitions
4361 The diufb command usage formatting is non-standard. It was
4362 made standard in preparation for larger command usage updates.
4364 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4366 commit 6450a8485836fc80615ae6de6a864c33369b44f5
4367 Author: Wolfgang Denk <wd@denx.de>
4368 Date: Wed Jan 28 00:29:26 2009 +0100
4370 Update CHANGELOG, tiny coding style cleanup.
4372 Signed-off-by: Wolfgang Denk <wd@denx.de>
4374 commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
4375 Author: Mike Frysinger <vapier@gentoo.org>
4376 Date: Tue Jan 27 16:12:21 2009 -0500
4378 SATA: do not auto-initialize during boot
4380 Rather than have the board code initialize SATA automatically during boot,
4381 make the user manually run "sata init". This brings the SATA subsystem in
4382 line with common U-Boot policy.
4384 Rather than having a dedicated weak function "is_sata_supported", people
4385 can override sata_initialize() to do their weird board stuff. Then they
4386 can call the actual __sata_initialize().
4388 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4390 commit 50970839712dda35399e2fa83fe818df9354d618
4391 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
4392 Date: Mon Jan 26 08:45:14 2009 -0500
4394 part_efi: Fix partition size calculation due to inclusive ending LBA.
4396 The ending LBA is inclusive. Hence, the partition size should be
4397 ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
4399 This is confirmed against the results from the parted tool.
4400 (e.g. use parted /dev/sda -s unit S print) and observe the size.
4402 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
4404 commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
4405 Author: Tomasz Figa <tomasz.figa@gmail.com>
4406 Date: Tue Dec 30 18:35:57 2008 +0100
4408 jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
4410 This patch fixes a bug (?) introduced after inclusion of the new
4413 When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
4414 fill in part->sector_size (keeping it as 0), but a correct value is
4415 needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
4416 to be in the same place of the memory, what obviously means
4417 impossibility to use the JFFS2 partition.
4419 This problem is fixed in this patch by including sector size
4420 calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.
4422 Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>
4424 commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
4425 Author: Mike Frysinger <vapier@gentoo.org>
4426 Date: Tue Dec 30 02:59:25 2008 -0500
4428 saveenv: standardize enablement
4430 Rather than special casing each environment type for enabling the saveenv
4431 command, have them all behave the same. This avoids bitrot as new env
4432 sources are added/removed.
4434 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4436 commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
4437 Author: Andrew Dyer <adyer@righthandtech.com>
4438 Date: Mon Dec 29 17:36:01 2008 -0600
4440 soft_i2c.c add option for repeated start in i2c_read()
4442 This patch adds a #define to optionally change the behaviour of
4443 i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
4444 stop-start between sending the device address pointer write and
4445 reading back the data. The current behaviour is retained as the
4448 While most devices will work either way, I have a smart battery(*)
4449 that requires repeated start, and someone at some point found a
4450 device that required a stop-start.
4452 (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf
4454 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
4456 commit 3429071700963ca2f944c51d695a7481af0cee33
4457 Author: Wolfgang Denk <wd@denx.de>
4458 Date: Tue Jan 27 22:07:14 2009 +0100
4460 {delta,zylonite}/lowlevel_init.S: fix typo
4462 Commit 9d803d8c mistakenly changed some constants
4463 from 0x300 into 300 - this patch fixes it.
4465 Pointed out by Tom Evans <tom@ceos.com.au>, see
4466 http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
4469 Signed-off-by: Wolfgang Denk <wd@denx.de>
4471 commit 1bc434373013af241835c14011ac3f291dccbf53
4472 Author: Stefan Althoefer <stefan.althoefer@web.de>
4473 Date: Sat Dec 20 19:40:41 2008 +0100
4475 drivers/net/e1000.c: missing terminator for supported devices
4477 Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
4479 commit 65f7d41031a70b1649b35020995c505edca91533
4480 Author: Wolfgang Denk <wd@denx.de>
4481 Date: Tue Jan 27 21:36:28 2009 +0100
4483 fat.c: fix warning: array subscript is above array bounds
4485 Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.
4487 Signed-off-by: Wolfgang Denk <wd@denx.de>
4489 commit 107b801cf3fe39612d69d70581ebc3bf5e215554
4490 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4491 Date: Fri Jan 2 15:11:41 2009 +0100
4493 Fix gunzip in case of insufficient output buffer
4495 U-Boot's gunzip() function does not handle the return code
4496 of zlib's inflate() function correctly. gunzip() is implemented
4497 to uncompress all input data in one run. So the correct return
4498 code for the good case is Z_STREAM_END. In case of insufficient
4499 output buffer memory inflate returns Z_OK. For gunzip() this
4502 It also makes sense to me to call inflateEnd() also in case
4505 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4507 commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
4508 Author: Stefan Roese <sr@denx.de>
4509 Date: Wed Jan 21 17:25:01 2009 +0100
4511 MIPS: Add VCT board series support (Part 3/3)
4513 Signed-off-by: Stefan Roese <sr@denx.de>
4515 commit ae691e5719c48f1d2826cb72722497d1d162765b
4516 Author: Stefan Roese <sr@denx.de>
4517 Date: Wed Jan 21 17:24:49 2009 +0100
4519 MIPS: Add VCT board series support (Part 2/3)
4521 Signed-off-by: Stefan Roese <sr@denx.de>
4523 commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
4524 Author: Stefan Roese <sr@denx.de>
4525 Date: Wed Jan 21 17:24:39 2009 +0100
4527 MIPS: Add VCT board series support (Part 1/3)
4529 Signed-off-by: Stefan Roese <sr@denx.de>
4531 commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
4532 Author: Stefan Roese <sr@denx.de>
4533 Date: Wed Jan 21 17:20:20 2009 +0100
4535 MIPS: Add flush_dcache_range() and invalidate_dcache_range()
4537 This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
4538 Those functions are needed for the upcoming dcache support for the USB
4539 EHCI driver. I chose this API because those cache handling functions are
4540 already present in the PPC architecture.
4542 Signed-off-by: Stefan Roese <sr@denx.de>
4543 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4545 commit de832a99414ff06a4b2cdc9f5280b387da039834
4546 Author: Stefan Roese <sr@denx.de>
4547 Date: Mon Jan 26 10:05:20 2009 +0100
4549 nand_spl: Fix compile problem with board_nand_init() prototype
4551 This patch removes the now obsolete and additionally wrongly defined
4552 board_nand_init() prototype from nand_spl/nand_boot.c.
4554 Signed-off-by: Stefan Roese <sr@denx.de>
4555 Signed-off-by: Scott Wood <scottwood@freescale.com>
4557 commit e8eac437189430d8e04a5d254ed92c58bc534a79
4558 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
4559 Date: Wed Jan 14 08:44:26 2009 -0500
4561 CFI: Add geometry reversal for STMicro M29W320ET
4563 Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
4565 Modeled after flash_fixup_amd, this patch handles the geometry reversal
4566 or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
4567 Since I cannot test all STM's chips, the detection is implemented as
4568 narrow as possible for now.
4570 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
4571 Signed-off-by: Stefan Roese <sr@denx.de>
4573 commit 0f8e851e897b535959a0781171910cd97f33c30c
4574 Author: Jens Gehrlein <sew_s@tqs.de>
4575 Date: Tue Dec 16 17:25:55 2008 +0100
4577 CFI: increase performance of function find_sector()
4579 Tested on TQM5200S-BD with Samsung K8P2815UQB
4581 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
4582 Signed-off-by: Stefan Roese <sr@denx.de>
4584 commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
4585 Author: Jens Gehrlein <sew_s@tqs.de>
4586 Date: Tue Dec 16 17:25:54 2008 +0100
4588 CFI: avoid redundant function call in single word programming mode
4590 The function find_sector() doesn't need to be called twice in
4591 the case of AMD command set.
4592 Tested on TQM5200S-BD with Samsung K8P2815UQB.
4594 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
4595 Signed-off-by: Stefan Roese <sr@denx.de>
4597 commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
4598 Author: Stefan Roese <sr@denx.de>
4599 Date: Mon Jan 26 10:15:23 2009 +0100
4601 ppc4xx: Remove compilation warning in gdppc440etc.c
4603 Signed-off-by: Stefan Roese <sr@denx.de>
4605 commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
4606 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4607 Date: Fri Jan 2 12:19:47 2009 +0100
4609 ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
4611 Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
4612 Either they define or undef it. Because it's not used in any source
4613 files this patch removes any references to it.
4615 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4616 Signed-off-by: Stefan Roese <sr@denx.de>
4618 commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
4619 Author: Dirk Eibach <eibach@gdsys.de>
4620 Date: Tue Dec 9 13:12:40 2008 +0100
4622 ppc4xx: Add GDsys PowerPC 440 ETX board support.
4624 Board support for the Guntermann & Drunck PowerPC 440 ETX module.
4625 Based on the AMCC Yosemite board support by Stefan Roese.
4627 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
4628 Signed-off-by: Stefan Roese <sr@denx.de>
4630 commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
4631 Author: Dirk Eibach <eibach@gdsys.de>
4632 Date: Tue Dec 9 11:00:07 2008 +0100
4634 ppc4xx: Improve DDR autodetect
4636 Added support for a second memory bank to DDR autodetection for 440
4638 Made hardcoded values configurable.
4640 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
4641 Signed-off-by: Stefan Roese <sr@denx.de>
4643 commit 71a040f4f556cca4d30f06805d82e717b3ef1020
4644 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4645 Date: Fri Nov 21 12:06:26 2008 +0900
4647 sh: sh7763rdp: Update sh7763rdp config
4649 Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
4651 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4652 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4654 commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
4655 Author: Gary Jennejohn <garyj@denx.de>
4656 Date: Thu Nov 20 12:28:38 2008 +0100
4658 mgcoge make ether_scc.c work with CONFIG_NET_MULTI
4660 This change is needed for mgcoge because it uses two ethernet drivers.
4662 Add a check for the presence of the PIGGY board on mgcoge. Without this
4663 board networking cannot work and the initialization must be aborted.
4665 Only allocate rtx once to prevent DPRAM exhaustion.
4667 Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
4670 Signed-off-by: Gary Jennejohn <garyj@denx.de>
4671 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4673 commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
4674 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4675 Date: Fri Nov 21 12:04:18 2008 +0900
4677 sh: sh_eth: Change new network API
4679 sh_eth used old network API. This patch changed new API.
4681 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4682 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4684 commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
4685 Author: Stefan Roese <sr@denx.de>
4686 Date: Wed Nov 12 13:31:02 2008 +0100
4688 net: smc911x: Make register read/write functions weak
4690 This patch changes the reg_read/_write to smc911x_reg_read/_write
4691 and defines then as weak so that they can be overridden by board
4694 This will be used by the upcoming VCTH board support.
4696 Signed-off-by: Stefan Roese <sr@denx.de>
4697 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4699 commit 8b69b563039989885969d24465c56f8ac4c07c4c
4700 Author: Heiko Schocher <hs@denx.de>
4701 Date: Thu Nov 20 09:57:14 2008 +0100
4703 powerpc: net: support for the SMSC LAN8700 PHY
4705 Signed-off-by: Heiko Schocher <hs@denx.de>
4706 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4708 commit d5254f149da9e6cd649d887b042ce577ef3ba78d
4709 Author: Alessandro Rubini <rubini@unipv.it>
4710 Date: Sat Jan 24 18:10:37 2009 +0100
4712 Initial support for Nomadik 8815 development board
4714 The NMDK8815 board is distributed by ST Microelectornics.
4715 Other (proprietary) code must be run to unlock the CPU before
4716 U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.
4718 This is the initial port, with basic infrastructure and
4719 a working serial port.
4721 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
4722 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
4723 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4725 commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
4726 Author: Dirk Behme <dirk.behme@googlemail.com>
4727 Date: Sun Dec 14 09:47:18 2008 +0100
4729 OMAP3: Add I2C support
4733 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4735 commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
4736 Author: Dirk Behme <dirk.behme@googlemail.com>
4737 Date: Sun Dec 14 09:47:17 2008 +0100
4739 OMAP3: Add MMC support
4743 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4745 commit 12201a13547ec22ddcdae278e74465e54a3be60c
4746 Author: Dirk Behme <dirk.behme@googlemail.com>
4747 Date: Sun Dec 14 09:47:16 2008 +0100
4749 OMAP3: Add NAND support
4753 Signed-off-by: Nishanth Menon <nm@ti.com>
4754 Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
4755 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4757 commit 91eee546737ae21d930af479530997174c342b13
4758 Author: Dirk Behme <dirk.behme@googlemail.com>
4759 Date: Sun Dec 14 09:47:15 2008 +0100
4761 OMAP3: Add common board, interrupt and system info
4763 Add common board, interrupt and system info code.
4765 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4767 commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
4768 Author: Dirk Behme <dirk.behme@googlemail.com>
4769 Date: Sun Dec 14 09:47:14 2008 +0100
4771 OMAP3: Add common clock, memory and low level code
4773 Add common clock, memory and low level code
4775 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4777 commit 0b02b184003e6a5023e05d5f31de54db279b1431
4778 Author: Dirk Behme <dirk.behme@googlemail.com>
4779 Date: Sun Dec 14 09:47:13 2008 +0100
4781 OMAP3: Add common cpu and start code
4783 Add common cpu and start code.
4785 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4787 commit a8b6450546cd507d331b8fde384791d84bde5651
4788 Author: Dirk Behme <dirk.behme@googlemail.com>
4789 Date: Sun Dec 14 09:47:12 2008 +0100
4791 OMAP3: Add OMAP3, memory and function prototype headers
4793 Add OMAP3, memory and function prototype header files for OMAP3.
4795 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4797 commit 2c803210a464abbac35752ca1c737514360b4c32
4798 Author: Dirk Behme <dirk.behme@googlemail.com>
4799 Date: Sun Dec 14 09:47:11 2008 +0100
4801 OMAP3: Add pin mux, clock and cpu headers
4803 Add pin mux, clock and cpu header files for OMAP3.
4805 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4807 commit 685533646f4ff17a84ec9265cabb60af325b6e1f
4808 Author: Maxim Artamonov <scn1874@yandex.ru>
4809 Date: Wed Dec 3 05:38:17 2008 +0300
4811 bugfix for i.mx31 CCM_UPCTL reg
4813 Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
4815 commit 24113a44ed5cd3257a0237c3961e121812fca6db
4816 Author: Mike Frysinger <vapier@gentoo.org>
4817 Date: Tue Dec 30 03:15:38 2008 -0500
4819 easylogo: add optional gzip support
4821 Some images can be quite large, so add an option to compress the
4822 image data with gzip in the U-Boot image. Then at runtime, the
4823 board can decompress it with the normal zlib functions.
4825 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4827 commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
4828 Author: Bryan Wu <bryan.wu@analog.com>
4829 Date: Fri Jan 2 20:47:45 2009 -0500
4831 fat: fix unaligned errors
4833 A couple of buffers in the fat code are declared as an array of bytes.
4834 But it is then cast up to a structure with 16bit and 32bit members.
4835 Since GCC assumes structure alignment here, we have to force the
4836 buffers to be aligned according to the structure usage.
4838 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
4839 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4841 commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
4842 Author: Brad Bozarth <bflinux@yumbrad.com>
4843 Date: Thu Jan 1 22:45:47 2009 -0500
4845 spi flash: fix crash due to spi flash miscommunication
4847 Higher spi flash layers expect to be given back a pointer that was
4848 malloced so that it can free the result, but the lower layers return
4849 a pointer that is in the middle of the malloced memory. Reorder the
4850 members of the lower spi structures so that things work out.
4852 Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
4853 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4854 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4856 commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
4857 Author: Yuri Tikhonov <yur@emcraft.com>
4858 Date: Sat Dec 20 14:54:21 2008 +0300
4860 FPU POST: fix warnings when building with 2.18 binutils
4862 When compile u-boot with the 2.18 binutils the following
4863 warning messages for each object file in post/lib_ppc/fpu/ is
4864 produced at the linking stage:
4866 post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
4869 This is because of the fact that, in general, the soft-float and
4870 hard-float ABIs are incompatible; the 2.18 binutils do checking
4871 of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
4872 produce the worning like above if these are not compatible.
4874 The incompatibility of ABIs is concerned only the float values:
4875 e.g. the soft-float ABI assumes the float argument passing in the
4876 pair of rX registers, and the hard-float ABI assumes passing of
4877 the float argument in the fX register. When we don't pass the float
4878 arguments between the functions compiled with different floatness,
4879 then such an application will work correctly.
4880 This is the case for the FPU POST: u-boot (compiled with soft-float)
4881 doesn't pass to (and doesn't get from) the FPU POST functions any
4882 floats; there are no functions exported from the post/lib_ppc/fpu/
4883 objects which would work with float parameters/returns too. So, we
4884 can reassure the linker not to worry about the difference in ABI
4885 attributes of linking files just by setting the 'soft-float'
4886 attribute for the objects in post/lib_ppc/fpu. And this patch does
4889 Also, to avoid passing both soft- and hard-float options in CFLAGS
4890 when compiling the files from post/lib_ppc/fpu (which is OK, but
4891 looks rather dirty) this patch removes the soft-float string from
4892 CFLAGS in post/lib_ppc/fpu/Makefile.
4894 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4896 commit a7c9310457e85b4598abe5b304108edf11332e2f
4897 Author: Peter Tyser <ptyser@xes-inc.com>
4898 Date: Wed Dec 17 16:36:22 2008 -0600
4900 Add support for Maxim's DS4510 I2C device
4902 Initial support for the DS4510, a CPU supervisor with
4903 integrated EEPROM, SRAM, and 4 programmable non-volatile
4904 GPIO pins. The CONFIG_DS4510 define enables support
4905 for the device while the CONFIG_CMD_DS4510 define
4906 enables the ds4510 command. The additional
4907 CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
4908 CONFIG_DS4510_RST defines add additional sub-commands
4909 to the ds4510 command when defined.
4911 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4913 commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
4914 Author: Dirk Eibach <eibach@gdsys.de>
4915 Date: Tue Dec 16 14:51:56 2008 +0100
4917 common: Iteration limit for memory test.
4919 The iteration limit is passed to mtest as a fourth parameter:
4920 [start [end [pattern [iterations]]]]
4921 If no fourth parameter is supplied, there is no iteration limit and the
4922 test will loop forever.
4924 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
4926 commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
4927 Author: Stefan Roese <sr@denx.de>
4928 Date: Mon Dec 15 15:40:12 2008 +0100
4930 serial: Rename driver vcth to vct to support other board variants
4932 Moved driver vcth.c to vct.c to better reflect the VCT board series.
4933 This driver is now used by the VCT platforms:
4939 Signed-off-by: Stefan Roese <sr@denx.de>
4941 commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
4942 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4943 Date: Fri Dec 12 00:45:27 2008 +0900
4945 nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
4947 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4949 commit c3284b030b1cd492b4f46c576aea01bef258599d
4950 Author: Peter Korsgaard <jacmet@sunsite.dk>
4951 Date: Wed Dec 10 16:24:16 2008 +0100
4953 common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
4955 Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
4956 similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
4957 !CONFIG_AUTOBOOT_KEYED case.
4959 Do this by reversing the loop so we do at least one iteration before
4960 checking for timeout.
4962 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
4964 commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
4965 Author: Niklaus Giger <niklaus.giger@netstal.com>
4966 Date: Mon Dec 8 17:24:08 2008 +0100
4968 Added legacy flash ST Micro M29W040B
4970 commit 626d07348e5f9f302f4ea182161a89f7362a0488
4971 Author: Graeme Russ <graeme.russ@gmail.com>
4972 Date: Mon Dec 8 20:04:51 2008 +1100
4974 Fixed off-by-one errors in lib_m68k/interrupts.c
4976 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
4978 commit a5989c42ae5e295f274a795c426c47819bbdbfda
4979 Author: Graeme Russ <graeme.russ@gmail.com>
4980 Date: Sun Dec 7 10:29:05 2008 +1100
4982 Removed all references to CONFIG_SYS_RESET_GENERIC
4984 Generic i386 reset - #define made redundant by weak function
4986 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
4988 commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
4989 Author: Graeme Russ <graeme.russ@gmail.com>
4990 Date: Sun Dec 7 10:29:04 2008 +1100
4992 Remove #ifdef CONFIG_SC520 in source code
4994 CONFIG_SC520 is now used for conditional compile
4996 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
4998 commit ead056bc206f6b7ee6dc98766678b64635ea20b8
4999 Author: Graeme Russ <graeme.russ@gmail.com>
5000 Date: Sun Dec 7 10:29:03 2008 +1100
5002 Added MMCR reset functionality
5004 Reset function specific to AMD SC520 microcontroller - Is more of a
5005 'hard reset' that the triple fault.
5007 Requires CONFIG_SYS_RESET_SC520 to be defined in config
5009 I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
5010 but ld requires that a object file in a library arhive MUST contain
5011 at least one function which does not override a weak function (and is
5012 called from outside the object file) in order for that object file to
5013 be extracted from the archive. This would be the only function on the
5014 new file, and hence, will never get linked in.
5016 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
5018 commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
5019 Author: Graeme Russ <graeme.russ@gmail.com>
5020 Date: Sun Dec 7 10:29:02 2008 +1100
5022 Moved generic (triple fault) reset code
5024 Moved from interrupts.c to cpu.c and made into a weak function to
5025 allow vendor specific override
5027 Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
5028 added to the vendor specific code without the need to remember to
5029 #undef usage of the generic method and if you forget to include your
5030 custom reset method, you will always get the default.
5032 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
5034 commit 9933d609020c297788f53f334c8465fa7a99b10c
5035 Author: Graeme Russ <graeme.russ@gmail.com>
5036 Date: Sun Dec 7 10:29:01 2008 +1100
5038 Moved definition of set_vector() to new header file
5040 This allows for future tidy ups and functionality that will require
5043 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
5045 commit 407976185e0dda2c90e89027121a1071b9c77bfb
5046 Author: Graeme Russ <graeme.russ@gmail.com>
5047 Date: Sun Dec 7 10:29:00 2008 +1100
5049 Moved sc520 specific code into new cpu/i386/sc520 folder
5051 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
5052 Signed-off-by: Wolfgang Denk <wd@denx.de>
5054 commit 85ffbbd51914925a542d8528be7f072e5ab02157
5055 Author: Graeme Russ <graeme.russ@gmail.com>
5056 Date: Sun Dec 7 10:28:58 2008 +1100
5058 Renamed cpu/i386/reset.S to resetvec.S
5060 Brings i386 in line with other CPUs with a reset vector and frees up reset.c
5061 for CPU reset functions
5063 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
5065 commit a3f4c123f569474e80ea012b8db0de46afdb6443
5066 Author: Wolfgang Denk <wd@denx.de>
5067 Date: Sat Jan 24 01:01:49 2009 +0100
5069 Makefile: keep lists sorted.
5071 Signed-off-by: Wolfgang Denk <wd@denx.de>
5073 commit c620c01e96814558470698ed5cab1bf2f504d1b5
5074 Author: Graeme Russ <graeme.russ@gmail.com>
5075 Date: Sun Dec 7 10:28:57 2008 +1100
5077 Added initial eNET board support
5079 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
5081 commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
5082 Author: Gary Jennejohn <garyj@denx.de>
5083 Date: Thu Nov 20 11:37:26 2008 +0100
5085 POWERPC 82xx: add the SCC as an HDLC controller
5087 Right now this is only used by keymile.
5089 Signed-off-by: Gary Jennejohn <garyj@denx.de>
5091 commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
5092 Author: Heiko Schocher <hs@denx.de>
5093 Date: Thu Nov 20 09:59:09 2008 +0100
5095 powerpc, keymile boards: extract identical config options
5097 This patch extracts the identical config options for the
5098 keymile boards mgcoge, mgsuvd and kmeter1 in a new
5099 common config file keymile-common.h.
5101 Signed-off-by: Heiko Schocher <hs@denx.de>
5103 commit 210c8c00aad3328145204adab434bb7d70b06b75
5104 Author: Heiko Schocher <hs@denx.de>
5105 Date: Fri Nov 21 08:29:40 2008 +0100
5107 powerpc: keymile: Add a check for the PIGGY debug board
5109 Check the presence of the PIGGY on the keymile boards mgcoge,
5110 mgsuvd and kmeter1. If the PIGGY is not present, dont register
5111 this Ethernet device.
5113 Signed-off-by: Heiko Schocher <hs@denx.de>
5114 Acked-by: Ben Warren <biggerbadderben@gmail.com>
5116 commit de0443614af4d16675ab436665aeb11ddc9f7214
5117 Author: Heiko Schocher <hs@denx.de>
5118 Date: Thu Nov 20 09:57:47 2008 +0100
5120 powerpc: 83xx: add support for the kmeter1 board
5122 This patch adds support for the kmeter1 board from Keymile,
5123 based on a Freescale MPC8360 CPU.
5125 - serial console on UART 1
5128 - Ethernet RMII Mode over UCC4
5131 Signed-off-by: Heiko Schocher <hs@denx.de>
5133 commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
5134 Author: Sergei Poselenov <sposelenov@emcraft.com>
5135 Date: Tue Nov 4 13:51:18 2008 +0100
5137 Add a do_div() wrapper macro, lldiv().
5139 Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
5140 the dividend and returns the result of division, so it is useful
5141 in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"
5143 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
5145 commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
5146 Author: Kumar Gala <galak@kernel.crashing.org>
5147 Date: Fri Jan 23 14:22:14 2009 -0600
5149 85xx: Add a 36-bit physical configuration for MPC8572DS
5151 We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
5152 to allow for larger memory sizes.
5154 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5156 commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
5157 Author: Kumar Gala <galak@kernel.crashing.org>
5158 Date: Fri Jan 23 14:22:13 2009 -0600
5160 85xx: Handle eLBC difference w/36-bit physical
5162 The eLBC only handles 32-bit physical address in systems with 36-bit
5163 physical. The previos generation of LBC handled 34-bit physical
5164 address in 36-bit systems. Added a new CONFIG option to convey
5165 the difference between the LBC and eLBC.
5167 Also added defines for XAM bits used in LBC for the extended 34-bit
5170 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5172 commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
5173 Author: Kumar Gala <galak@kernel.crashing.org>
5174 Date: Fri Jan 23 14:22:12 2009 -0600
5176 85xx: Use BR_ADDR macro for NAND chipselects
5178 Use the new BR_ADDR macro to properly setup the address field of the
5179 localbus chipselects used by NAND.
5181 This allows us to deal with 36-bit phys on these boards in the future.
5183 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5185 commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
5186 Author: Haiying Wang <Haiying.Wang@freescale.com>
5187 Date: Thu Jan 15 11:58:35 2009 -0500
5189 Add secondary CPUs processor frequency for e500 core
5191 This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
5192 and prints each CPU's frequency separately. It also fixes up each CPU's
5193 frequency in "clock-frequency" of fdt blob.
5195 Signed-off-by: James Yang <James.Yang@freescale.com>
5196 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5198 commit bf5b1f0c0d28ce062e1d368680632dfb099de692
5199 Author: Dave Liu <daveliu@freescale.com>
5200 Date: Fri Nov 21 16:31:53 2008 +0800
5202 85xx: enable the auto self refresh for wake up ARP
5204 The wake up ARP feature need use the memory to process
5205 wake up packet, we enable auto self refresh to support it.
5207 Signed-off-by: Dave Liu <daveliu@freescale.com>
5208 Acked-by: Andy Fleming <afleming@freescale.com>
5210 commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
5211 Author: Dave Liu <daveliu@freescale.com>
5212 Date: Fri Nov 21 16:31:43 2008 +0800
5214 fsl-ddr: use the 1T timing as default configuration
5216 For light loaded system, we use the 1T timing to gain better
5217 memory performance, but for some heavily loaded system,
5218 you have to add the 2T timing options to board files.
5220 Signed-off-by: Dave Liu <daveliu@freescale.com>
5221 Acked-by: Andy Fleming <afleming@freescale.com>
5223 commit 22cca7e1cd54590e967c73558b07ffbdccd39504
5224 Author: Dave Liu <daveliu@freescale.com>
5225 Date: Fri Nov 21 16:31:35 2008 +0800
5227 fsl-ddr: make the self refresh idle threshold configurable
5229 Some 85xx processors have the advanced power management feature,
5230 such as wake up ARP, that needs enable the automatic self refresh.
5232 If the DDR controller pass the SR_IT (self refresh idle threshold)
5233 idle cycles, it will automatically enter self refresh. However,
5234 anytime one transaction is issued to the DDR controller, it will
5235 reset the counter and exit self refresh state.
5237 Signed-off-by: Dave Liu <daveliu@freescale.com>
5238 Acked-by: Andy Fleming <afleming@freescale.com>
5240 commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
5241 Author: Dave Liu <daveliu@freescale.com>
5242 Date: Fri Nov 21 16:31:29 2008 +0800
5244 fsl-ddr: clean up the ddr code for DDR3 controller
5246 - The DDR3 controller is expanding the bits for timing config
5247 - Add the DDR3 32-bit bus mode support
5249 Signed-off-by: Dave Liu <daveliu@freescale.com>
5250 Acked-by: Andy Fleming <afleming@freescale.com>
5252 commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
5253 Author: Dave Liu <daveliu@freescale.com>
5254 Date: Fri Nov 21 16:31:22 2008 +0800
5256 fsl-ddr: update the bit mask for DDR3 controller
5258 According to the latest 8572 UM, the DDR3 controller
5259 is expanding the bit mask, and we use the extend ACTTOPRE
5260 mode when tRAS more than 19 MCLK.
5262 Signed-off-by: Dave Liu <daveliu@freescale.com>
5264 commit aca5f018a8386b85469482ed9867e3e29a2437d0
5265 Author: Kumar Gala <galak@kernel.crashing.org>
5266 Date: Tue Dec 2 16:08:40 2008 -0600
5268 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
5270 Introduce a new define to seperate out the virtual address that PCI
5271 IO space is at from the physical address. In most situations these are
5272 mapped 1:1. However any code accessing the bus should use VIRT.
5274 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5275 Acked-by: Andy Fleming <afleming@freescale.com>
5277 commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
5278 Author: Kumar Gala <galak@kernel.crashing.org>
5279 Date: Tue Dec 2 16:08:39 2008 -0600
5281 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
5283 Introduce a new define to seperate out the virtual address that PCI
5284 memory is at from the physical address. In most situations these are
5285 mapped 1:1. However any code accessing the bus should use VIRT.
5287 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5288 Acked-by: Andy Fleming <afleming@freescale.com>
5290 commit a6e04c344ad1eefd47a75484441b385da815b8df
5291 Author: Kumar Gala <galak@kernel.crashing.org>
5292 Date: Tue Dec 2 16:08:38 2008 -0600
5294 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
5296 Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
5297 of TLBs. This is what we should have always been using from the start.
5299 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5300 Acked-by: Andy Fleming <afleming@freescale.com>
5302 commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
5303 Author: Kumar Gala <galak@kernel.crashing.org>
5304 Date: Tue Dec 2 16:08:37 2008 -0600
5306 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
5308 Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
5309 of _IO_BASE so we are more explicit.
5311 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5313 commit 10795f42cb94e71bcb262b615084f69dd886399a
5314 Author: Kumar Gala <galak@kernel.crashing.org>
5315 Date: Tue Dec 2 16:08:36 2008 -0600
5317 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
5319 Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
5320 of _MEM_BASE so we are more explicit.
5322 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5323 Acked-by: Andy Fleming <afleming@freescale.com>
5325 commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
5326 Author: Kumar Gala <galak@kernel.crashing.org>
5327 Date: Tue Dec 2 14:19:34 2008 -0600
5329 85xx: separate FLASH BASE virtual from physical address
5331 Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
5332 maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.
5334 This allows us to deal with 36-bit phys on these boards in the future.
5336 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5337 Acked-by: Andy Fleming <afleming@freescale.com>
5339 commit 52b565f5ad23b682489055b187767d8bf1c2e444
5340 Author: Kumar Gala <galak@kernel.crashing.org>
5341 Date: Tue Dec 2 14:19:33 2008 -0600
5343 85xx: separate PIXIS virtual from physical address
5345 Added a PIXIS_BASE_PHYS for use as the physical address and maintain
5346 PIXIS_BASE as the virtual address of the PIXIS fpga registers.
5348 This allows us to deal with 36-bit phys on these boards in the future.
5350 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5351 Acked-by: Andy Fleming <afleming@freescale.com>
5353 commit 30837e5b21d5a742983581ab9ee3fac085311d19
5354 Author: Haiying Wang <Haiying.Wang@freescale.com>
5355 Date: Tue Nov 11 08:52:09 2008 -0500
5357 Add README file for MPC8572DS board
5359 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5360 Acked-by: Andy Fleming <afleming@freescale.com>
5362 commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
5363 Author: Mike Frysinger <vapier@gentoo.org>
5364 Date: Mon Oct 20 16:15:04 2008 -0400
5366 Blackfin: use common strmhz() in system output
5368 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5370 commit 5bb907a4925397789c90d074f4f7e92ce6b39402
5371 Author: Ron Madrid <ron_madrid@sbcglobal.net>
5372 Date: Thu Jan 22 15:05:24 2009 -0800
5374 mpc83xx: New board support for SIMPC8313
5376 This patch will create a new board, SIMPC8313, from Sheldon Instruments. This
5377 board boots from NAND devices and is configureable for either large or small
5378 page devices. The board supports non-soldered DDR2, one ethernet port, a
5379 Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected
5380 to the eLBC providing glue logic to a TMS320C67xx DSP.
5382 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
5383 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5385 commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
5386 Author: Mike Frysinger <vapier@gentoo.org>
5387 Date: Sun Jan 18 19:46:06 2009 -0500
5389 nand: fixup printf modifiers to match types used
5391 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5392 Signed-off-by: Scott Wood <scottwood@freescale.com>
5394 commit 389e6620e2271096df3316917528003627db4021
5395 Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
5396 Date: Tue Jan 20 16:57:55 2009 +0100
5398 nand read.jffs2 (nand_legacy) in common/cmd_nand.c
5400 Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
5401 With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
5402 "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
5403 tested before ".jffs2s" and only the first two characters are compared.
5406 Test for ".jffs2s" first and compare the first 7 characters.
5408 Signed-off-by: Scott Wood <scottwood@freescale.com>
5410 commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
5411 Author: Wolfgang Grandegger <wg@grandegger.com>
5412 Date: Fri Jan 16 18:55:54 2009 +0100
5414 NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
5416 This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
5417 changes the default from 8 to 1 for the legacy and the new MTD
5418 NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
5419 in the board config files because none of the boards use multi
5420 chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
5423 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
5425 but that's bogus and did not work anyhow.
5427 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5428 Signed-off-by: Scott Wood <scottwood@freescale.com>
5430 commit c70564e6b1bd08f3230182392238907f3531a87e
5431 Author: Dave Liu <daveliu@freescale.com>
5432 Date: Tue Dec 2 11:48:51 2008 +0800
5434 NAND: Fix cache and memory inconsistency issue
5436 We load the secondary stage u-boot image from NAND to
5437 system memory by nand_load, but we did not flush d-cache
5438 to memory, nor invalidate i-cache before we jump to RAM.
5439 When the system has cache enabled and the TLB/page attribute
5440 of system memory is cacheable, it will cause issues.
5442 - 83xx family is using the d-cache lock, so all of d-cache
5443 access is cache-inhibited. so you can't see the issue.
5444 - 85xx family is using d-cache, i-cache enable, partial
5445 cache lock. you will see the issue.
5447 This patch fixes the cache issue.
5449 Signed-off-by: Dave Liu <daveliu@freescale.com>
5450 Signed-off-by: Scott Wood <scottwood@freescale.com>
5452 commit 50657c273278f74378e1ac39b41d612b92fdffa0
5453 Author: Nishanth Menon <menon.nishanth@gmail.com>
5454 Date: Sat Dec 13 09:43:06 2008 -0600
5456 NAND: Enable nand lock, unlock feature
5458 Enable nand lock, unlock and status of lock feature.
5459 Not every device and platform requires this, hence,
5460 it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK
5462 Nand unlock and status operate on block boundary instead
5463 of page boundary. Details in:
5464 http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT
5466 Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
5467 Includes preliminary suggestions from Scott Wood
5469 Signed-off-by: Nishanth Menon <nm@ti.com>
5470 Signed-off-by: Scott Wood <scottwood@freescale.com>
5472 commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
5473 Author: Mike Frysinger <vapier@gentoo.org>
5474 Date: Sat Dec 6 02:40:55 2008 -0500
5476 NAND: move board_nand_init to nand.h
5478 Rather than putting the function prototype for board_nand_init() in the one
5479 place where it gets called, put it into nand.h so that every place that also
5480 defines it gets the prototype. Otherwise, errors can go silently unnoticed
5481 such as using the wrong return value (void rather than int) when defining
5484 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5485 Signed-off-by: Scott Wood <scottwood@freescale.com>
5487 commit 1ae39862044ebb1e682234b51f94421e3f871d6a
5488 Author: Stefan Roese <sr@denx.de>
5489 Date: Tue Dec 2 11:06:47 2008 +0100
5491 OneNAND: Additional sync with 2.6.27
5493 - Add subpage write support
5494 - Add onenand_oob_64/32 ecclayout
5496 This has been missing and without it UBI has some incompatibilies issues
5497 with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
5498 placed differently (2048 instead of 512) without this fix.
5500 Signed-off-by: Stefan Roese <sr@denx.de>
5501 Signed-off-by: Scott Wood <scottwood@freescale.com>
5503 commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
5504 Author: Kyungmin Park <kmpark@infradead.org>
5505 Date: Thu Nov 13 15:14:33 2008 +0900
5507 Add markbad function
5509 Add missing markbad function
5510 If not, it's hang when it entered the mtd->mark_bad().
5512 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5514 commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
5515 Author: Stefan Roese <sr@denx.de>
5516 Date: Wed Nov 12 13:47:24 2008 +0100
5518 OneNAND: Bad block aware read/write command support
5520 Update OneNAND command to support bad block awareness.
5521 Also change the OneNAND command style to better match the
5524 Signed-off-by: Stefan Roese <sr@denx.de>
5525 Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
5527 commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
5528 Author: Stefan Roese <sr@denx.de>
5529 Date: Tue Nov 11 10:29:09 2008 +0100
5531 OneNAND: Save version_id in onenand_chip struct
5533 The version (ver_id) was not stored in the onenand_chip structure and
5534 because of this the continuous locking scheme could be enabled on some
5537 Signed-off-by: Stefan Roese <sr@denx.de>
5539 commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
5540 Author: Stefan Roese <sr@denx.de>
5541 Date: Tue Nov 11 10:28:53 2008 +0100
5543 OneNAND: Fix compiler warnings
5545 Signed-off-by: Stefan Roese <sr@denx.de>
5547 commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
5548 Author: Dave Liu <daveliu@freescale.com>
5549 Date: Tue Nov 4 14:55:06 2008 +0800
5551 mpc83xx: enable eLBC NAND support for MPC8315ERDB board
5553 Signed-off-by: Dave Liu <daveliu@freescale.com>
5555 commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
5556 Author: Kyungmin Park <kmpark@infradead.org>
5557 Date: Tue Nov 4 09:24:07 2008 +0900
5561 Sync with OneNAND kernel codes
5563 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5565 commit e7f325be9edeb84bb457301776bbac1f7257dafc
5566 Author: Michal Simek <monstr@monstr.eu>
5567 Date: Mon Jan 5 13:35:31 2009 +0100
5569 microblaze: Use cache functions (especially cache status)
5570 in systems which are configured without flash
5572 commit e9b737deb2c30125362d20e24170617476026e94
5573 Author: Michal Simek <monstr@monstr.eu>
5574 Date: Mon Jan 5 13:29:32 2009 +0100
5576 microblaze: Add cache flush
5578 commit b4f8dda35bfad447b4106828232705b2e878d168
5579 Author: Michal Simek <monstr@monstr.eu>
5580 Date: Mon Jan 5 13:28:40 2009 +0100
5582 microblaze: Add bootup messages to board.c
5584 commit 330e55459bc9983341da6c1d5c7fe00a664436fe
5585 Author: Michal Simek <monstr@monstr.eu>
5586 Date: Fri Dec 19 13:25:55 2008 +0100
5588 microblaze: Change microblaze-generic config file
5590 Signed-off-by: Michal Simek <monstr@monstr.eu>
5592 commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
5593 Author: Michal Simek <monstr@monstr.eu>
5594 Date: Fri Dec 19 13:14:05 2008 +0100
5596 microblaze: Rename ml401 to microblaze-generic
5598 Signed-off-by: Michal Simek <monstr@monstr.eu>
5600 commit 6677876181cc8772bca8a372479a500d160f3993
5601 Author: Scott Wood <scottwood@freescale.com>
5602 Date: Tue Jan 20 11:56:11 2009 -0600
5604 83xx: Use the proper sequence for updating IMMR.
5606 This ensures that subsequent accesses properly hit the new window.
5608 The dcbi during the NAND loop was accidentally working around this;
5609 it's no longer necessary, as the cache is not enabled.
5611 Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
5612 Signed-off-by: Scott Wood <scottwood@freescale.com>
5613 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5615 commit 8b34557c546e5e9f34ebf83c93413dad973d93df
5616 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5617 Date: Thu Jan 8 04:26:19 2009 +0300
5619 mpc83xx: Add PCI-E support for MPC837XEMDS boards
5621 MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
5622 provides two PCI-E (x2) ports. Though, only one port can be used in x2
5623 mode. Two ports can function simultaneously in x1 mode.
5625 PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
5627 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5628 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5630 commit 8f11e34b31a7be124a3239653f33af9510502045
5631 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5632 Date: Thu Jan 8 04:26:17 2009 +0300
5634 mpc83xx: Add PCI-E support for MPC8315ERDB boards
5636 MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
5639 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5640 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5642 commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
5643 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5644 Date: Thu Jan 8 04:26:12 2009 +0300
5646 mpc83xx: Add support for MPC83xx PCI-E controllers
5648 This patch adds support for MPC83xx PCI-E controllers in Root Complex
5651 The patch is based on Tony Li and Dave Liu work[1].
5653 Though unlike the original patch, by default we don't register PCI-E
5654 buses for use in U-Boot, we only configure the controllers for future
5655 use in other OSes (Linux). This is done because we don't have enough
5656 of spare BATs to map all the PCI-E regions.
5658 To actually use PCI-E in U-Boot, users should explicitly define
5659 CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
5660 only then U-Boot will able to access PCI-E, but at the cost of disabled
5661 address translation.
5663 [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
5665 Signed-off-by: Tony Li <tony.li@freescale.com>
5666 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5667 Acked-by: Dave Liu <daveliu@freescale.com>
5668 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5670 commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
5671 Author: Ira Snyder <iws@ovro.caltech.edu>
5672 Date: Mon Jan 12 13:33:17 2009 -0800
5674 MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode
5676 When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
5677 not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
5678 "Clocking in PCI Agent Mode".
5680 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
5681 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5683 commit 75f35209f702bb26826855ed8c8e4d108ab5f412
5684 Author: Ira Snyder <iws@ovro.caltech.edu>
5685 Date: Mon Jan 12 13:32:26 2009 -0800
5687 83xx: PCI agent mode fixes for multi-board systems
5689 When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
5690 the boards will lock up the PCI bus by scanning against each other.
5692 The boards lock against each other by trying to access the PCI bus before
5693 clearing their configuration lock bit. Both boards end up in a loop,
5694 sending and receiving "Target Not Ready" messages forever.
5696 When running in PCI agent mode, the scanning now takes place after the
5697 boards have cleared their configuration lock bit.
5699 Also, add a missing declaration to the mpc83xx.h header file, fixing a
5702 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
5703 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5705 commit 455a46915b82896cc2070eb326d075555c2bc580
5706 Author: Ron Madrid <ron_madrid@sbcglobal.net>
5707 Date: Fri Dec 12 13:12:45 2008 -0800
5709 mpc83xx: Size optimization of start.S
5711 Currently there are in excess of 100 bytes located at the beginning of the image
5712 built by start.S that are not being utilized. This patch moves a few functions
5713 into this part of the image. This will create a greater number of *available*
5714 bytes that can be used by board specific code in NAND builds and will decrease
5715 the size of the assembled code in other builds.
5717 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
5718 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5720 commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
5721 Author: Wolfgang Denk <wd@denx.de>
5722 Date: Wed Jan 21 23:08:12 2009 +0100
5726 Signed-off-by: Wolfgang Denk <wd@denx.de>
5728 commit 635e5f8fc82365e6e9734b3132bc95135a6de679
5729 Author: Wolfgang Denk <wd@denx.de>
5730 Date: Sun Jan 18 21:37:48 2009 +0100
5736 Signed-off-by: Wolfgang Denk <wd@denx.de>
5738 commit 4cda437898f7873752f0201757cd33f12196ce87
5739 Author: Mike Frysinger <vapier@gentoo.org>
5740 Date: Sat Jan 17 13:32:42 2009 -0500
5742 build system: treat all Darwin's alike
5744 The x86 based version of Darwin behaves the same quirky way as the powerpc
5745 Darwin, so only check HOSTOS when setting up Darwin workarounds.
5747 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5749 commit c088a108c75db565e07292fd668dfa5491e85bc2
5750 Author: Peter Korsgaard <jacmet@sunsite.dk>
5751 Date: Wed Jan 14 13:52:24 2009 +0100
5753 fdt_resize(): fix actualsize calculations with unaligned blobs
5755 The code in fdt_resize() to extend the fdt size to end on a page boundary
5756 is wrong for fdt's not located at an address aligned on a page boundary.
5757 What's even worse, the code would make actualsize shrink rather than grow
5758 if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
5759 causing fdt_add_mem_rsv to fail.
5761 Fix it by aligning end address (blob + size) to a page boundary instead.
5762 For aligned fdt's this is equivalent to what we had before.
5764 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
5766 commit fadad1573fb16c90025f08a2861d6047d093cba7
5767 Author: Mike Frysinger <vapier@gentoo.org>
5768 Date: Fri Jan 9 04:38:17 2009 -0500
5772 The recvfrom() function takes a socklen_t, not an int.
5774 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5776 commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
5777 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5778 Date: Sun Jan 11 16:35:16 2009 +0100
5780 sh: serial: use readx/writex accessors
5782 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5783 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5785 commit 9e1fa628bdb64745811cdd26c4f953846c076180
5786 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5787 Date: Sun Jan 11 16:35:15 2009 +0100
5789 sh: serial: coding style cleanup
5791 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5792 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5794 commit c9935c992575922b7ef13eec0656ed8665d324e3
5795 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5796 Date: Sun Jan 11 17:48:56 2009 +0900
5798 sh: Fix compile error on lowlevel_init file
5800 lowlevel_init of SH was corrected to use the write/readXX macro.
5801 However, there was a problem that was not able to be compiled partially.
5802 This patch corrected this.
5804 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5806 commit a5b04d00bfeb940c62232972ce644d50b45797f9
5807 Author: Kieran Bingham <kieranbingham@gmail.com>
5808 Date: Tue Dec 30 01:16:03 2008 +0000
5810 sh: Fix up rsk7203 target for out of tree build
5812 Fix up rsk7203 target to build successfully using out-of-tree build.
5814 Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
5815 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5817 commit f7e78f3b74aae9caca2997bad865a72338326c0a
5818 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5819 Date: Sat Dec 20 19:29:49 2008 +0100
5821 sh: use write{8,16,32} in all lowlevel_init
5823 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5824 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5826 commit e4430779623af500de1cee7892c379f07ef59813
5827 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5828 Date: Sat Dec 20 19:29:48 2008 +0100
5830 sh: lowlevel_init coding style cleanup
5832 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5833 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5835 commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
5836 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5837 Date: Sat Dec 20 15:27:45 2008 +0100
5839 sh: update sh2/sh2a timer coding style
5841 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5842 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5844 commit 1e15ff999322e81af4c0c0c548908f38944ba39c
5845 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5846 Date: Sat Dec 20 15:25:22 2008 +0100
5848 sh: update sh timer coding style
5850 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5851 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5853 commit 0e3ece33801e377be67ffa29f083421ad820f28b
5854 Author: Wolfgang Denk <wd@denx.de>
5855 Date: Wed Jan 14 23:26:05 2009 +0100
5861 Signed-off-by: Wolfgang Denk <wd@denx.de>
5863 commit e92c9a860e44c14513c8909ce4299e253a775eeb
5864 Author: Wolfgang Denk <wd@denx.de>
5865 Date: Wed Jan 14 22:35:30 2009 +0100
5867 cpu/mpc824x/Makefile: fix warning with parallel builds
5869 Parallel builds would occasionally issue this build warning:
5871 ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
5873 Use "ln -sf" as quick work around for the issue.
5875 Signed-off-by: Wolfgang Denk <wd@denx.de>
5877 commit 3ba605d4beec649438539e7df97b5fedb26592fb
5878 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5879 Date: Fri Jan 2 12:18:49 2009 +0100
5881 ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
5883 This patch adds esd's loadpci BSP command to CPCI4052 and
5884 CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
5886 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5887 Signed-off-by: Stefan Roese <sr@denx.de>
5889 commit 600fe46fb3dab7f07604f9009904f31584415114
5890 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5891 Date: Fri Jan 2 12:18:12 2009 +0100
5893 ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
5895 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5896 Signed-off-by: Stefan Roese <sr@denx.de>
5898 commit f6a1f490d224c600a09137e58d1026d150b8e679
5899 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5900 Date: Fri Jan 2 12:17:36 2009 +0100
5902 ppc4xx: Cleanup CPCI405 board code
5904 This patch cleans up CPCI405 board support:
5906 - unification of spaces in function calls
5909 Use correct io accessors on peripherals.
5911 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5912 Signed-off-by: Stefan Roese <sr@denx.de>
5914 commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
5915 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5916 Date: Fri Jan 2 12:16:35 2009 +0100
5918 ppc4xx: Enable auto RS485 mode on PLU405 boards
5920 This patch turns on the auto RS485 mode in the 2nd external
5921 uart on PLU405 boards. This is a special mode of the used
5922 Exar XR16C2850 uart. Because these boards only have a 485 physical
5923 layer connected it's a good idea to turn it on by default.
5925 Signed-off-by: Matthias Fuchs <mf@esd.eu>
5926 Signed-off-by: Stefan Roese <sr@denx.de>
5928 commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
5929 Author: Haiying Wang <Haiying.Wang@freescale.com>
5930 Date: Tue Jan 13 16:29:28 2009 -0500
5932 Some changes of TLB entry setting for MPC8572DS
5934 - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
5935 all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
5936 can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
5938 - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
5940 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5942 commit 950264317eb9594b2b5ee2fb65206200a1c6007a
5943 Author: Haiying Wang <Haiying.Wang@freescale.com>
5944 Date: Tue Jan 13 16:29:22 2009 -0500
5946 Change DDR tlb start entry to CONFIG param for 85xx
5948 So that we can locate the DDR tlb start entry to the value other than 8. By
5949 default, it is still 8.
5951 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5953 commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
5954 Author: Roy Zang <tie-fei.zang@freescale.com>
5955 Date: Fri Jan 9 16:02:35 2009 +0800
5957 Change PCIE1&2 deciide logic on MPC8544DS board more readable
5959 The IO port selection for MPC8544DS board:
5961 PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
5962 PCIE2 0x4, 0x5, 0x6, 0x7
5964 This patch changes the PCIE12 and PCIE2 logic more readable.
5965 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5967 commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
5968 Author: Roy Zang <tie-fei.zang@freescale.com>
5969 Date: Fri Jan 9 16:01:52 2009 +0800
5971 PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
5973 PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
5975 On MPC8572DS board, PCIE refers to PCIE1.
5976 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5978 commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
5979 Author: Roy Zang <tie-fei.zang@freescale.com>
5980 Date: Fri Jan 9 16:00:55 2009 +0800
5982 Fix IO port selection issue on MPC8544DS and MPC8572DS boards
5984 The IO port selection is not correct on MPC8572DS and MPC8544DS board.
5985 This patch fixes this issue.
5988 PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf
5994 PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
5995 PCIE2 0x4, 0x5, 0x6, 0x7
5997 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5999 commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
6000 Author: Becky Bruce <beckyb@kernel.crashing.org>
6001 Date: Wed Dec 3 22:36:44 2008 -0600
6003 mpc8610hpcd: Fix PCI mapping concepts
6005 Rename _BASE to _BUS, as it's actually a PCI bus address,
6006 separate virtual and physical addresses into _VIRT and _PHYS,
6007 and use each appopriately. This makes the code easier to read
6008 and understand, and facilitates mapping changes going forward.
6010 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6012 commit 79e436cad3b4a7db88408c3f05175028f30d700d
6013 Author: Becky Bruce <beckyb@kernel.crashing.org>
6014 Date: Wed Dec 3 22:36:26 2008 -0600
6016 sbc8641d: Fix PCI mapping concepts
6018 Rename _BASE to _BUS, as it's actually a PCI bus address,
6019 separate virtual and physical addresses into _VIRT and _PHYS,
6020 and use each appopriately. This makes the code easier to read
6021 and understand, and facilitates mapping changes going forward.
6023 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6025 commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
6026 Author: Wolfgang Denk <wd@denx.de>
6027 Date: Mon Jan 12 14:50:35 2009 +0100
6029 MPC86xx: fix build warnings
6031 Signed-off-by: Wolfgang Denk <wd@denx.de>
6033 commit 032a1c934ef4dc003281f57302b6e693062c1868
6034 Author: Mike Frysinger <vapier@gentoo.org>
6035 Date: Mon Jan 5 16:09:44 2009 -0500
6037 bf537-stamp/nand: fix board_nand_init prototype
6039 The board_nand_init() function should return an int, not void.
6041 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6043 commit 687f952e4119594ab913be11c90f7f018c2a7a79
6044 Author: Mike Frysinger <vapier@gentoo.org>
6045 Date: Thu Dec 11 07:04:48 2008 -0500
6047 Blackfin: drop CONFIG_SPI handling in board init
6049 The eeprom SPI init functions are duplicated as the common code already
6050 executes these for us.
6052 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6054 commit e7e684b10d73a303902208594c7c3e7e0d753282
6055 Author: Mike Frysinger <vapier@gentoo.org>
6056 Date: Fri Oct 24 17:51:57 2008 -0400
6058 Blackfin: fix out-of-tree building with ldscripts
6060 Many of the Blackfin board linker scripts are preprocessed, so make sure we
6061 output the linker script into the build tree rather than the source tree.
6063 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6065 commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
6066 Author: Mike Frysinger <vapier@gentoo.org>
6067 Date: Fri Oct 24 17:48:54 2008 -0400
6069 Blackfin: fix linker scripts to work with --gc-sections
6071 Make sure all .text sections get pulled in and the entry point is properly
6072 referenced so they don't get discarded when linking with --gc-sections.
6074 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6076 commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
6077 Author: Mike Frysinger <vapier@gentoo.org>
6078 Date: Sat Oct 11 20:45:44 2008 -0400
6080 Blackfin: set proper LDRFLAGS for parallel booting LDRs
6082 In order to boot an LDR out of parallel flash, the ldr utility needs a few
6083 flags to tell it to generate the right header.
6085 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6087 commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
6088 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6089 Date: Tue Jan 6 21:41:59 2009 +0100
6091 at91rm9200: move define from lowlevel_init to header
6093 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6095 commit 8a48686fac2030287765f1970ea046bd5734b733
6096 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6097 Date: Sat Jan 3 17:22:26 2009 +0100
6099 m501sk: move to the common memory setup
6101 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6103 commit d481c80d78f954133c035dae6c7d22de3625795d
6104 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6105 Date: Sat Jan 3 17:22:25 2009 +0100
6107 at91rm9200: rename lowlevel init value to CONFIG_SYS_
6109 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6111 commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
6112 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
6113 Date: Tue Jan 6 21:13:14 2009 +0100
6115 at91: add at91sam9xeek board support
6117 At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
6118 it as another entry for at91sam9260 in the Makefile.
6120 Check documentation at :
6121 http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
6123 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
6124 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6126 commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
6127 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6128 Date: Tue Jan 6 21:15:57 2009 +0100
6130 fix bmp_logo.h make dependencies to allow parallel build
6132 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6134 commit e12d9a8fb48d24176efffccc072b445e60a3afe4
6135 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6136 Date: Sat Jan 3 17:22:24 2009 +0100
6138 at91: Fix Atmel's at91sam9 boards out of tree build
6140 introduced in commit 89a7a87f084c
6142 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6144 commit 0668236bafaa1c11c521652a2facebc74beecbf0
6145 Author: Wolfgang Denk <wd@denx.de>
6146 Date: Tue Dec 30 22:56:11 2008 +0100
6148 README: update mailing list name and hits to patch submission.
6150 Signed-off-by: Wolfgang Denk <wd@denx.de>
6152 commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
6153 Author: Peter Tyser <ptyser@xes-inc.com>
6154 Date: Tue Dec 23 16:32:01 2008 -0600
6156 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
6158 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6160 commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
6161 Author: Peter Tyser <ptyser@xes-inc.com>
6162 Date: Tue Dec 23 16:32:00 2008 -0600
6164 XPedite5200 board support cleanup
6166 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6168 commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
6169 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6170 Date: Tue Dec 2 21:58:04 2008 +0100
6172 usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
6174 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6175 Signed-off-by: Remy Böhmer <linux@bohmer.net>
6177 commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
6178 Author: Trent Piepho <tpiepho@freescale.com>
6179 Date: Wed Dec 3 15:16:37 2008 -0800
6181 mpc8[56]xx: Put localbus clock in sysinfo and gd
6183 Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
6184 and print it out, but don't save it.
6186 This changes where its calculated and stored to be more consistent with the
6187 CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
6189 The localbus frequency is added to sysinfo and calculated when sysinfo is
6190 set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
6192 get_clocks() copies the frequency into the global data, as the other
6193 frequencies are, into a new field that is only enabled for MPC85xx and
6196 checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
6197 from sysinfo, like the other frequencies, instead of calculating it on the
6200 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
6201 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6202 Acked-by: Jon Loeliger <jdl@freescale.com>
6204 commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
6205 Author: Trent Piepho <tpiepho@freescale.com>
6206 Date: Wed Dec 3 15:16:36 2008 -0800
6208 mpc86xx: Double local bus clock divider
6210 The local bus clock divider should be doubled for both 8610 and 8641.
6212 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
6213 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6214 Acked-by: Jon Loeliger <jdl@freescale.com>
6216 commit 446c381e3e16f19857b72ea0d06241267b8b9d58
6217 Author: Trent Piepho <tpiepho@freescale.com>
6218 Date: Wed Dec 3 15:16:35 2008 -0800
6220 mpc8568: Double local bus clock divider
6222 The clock divider for the MPC8568 local bus should be doubled, like the
6223 other newer MPC85xx chips.
6225 Since there are now more chips with a 2x divider than a 1x, and any new
6226 85xx chips will probably be 2x, invert the sense of the #if so that it
6227 lists the 1x chips instead of the 2x ones.
6229 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
6230 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6231 Acked-by: Jon Loeliger <jdl@freescale.com>
6233 commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
6234 Author: Dave Liu <daveliu@freescale.com>
6235 Date: Tue Dec 16 12:09:27 2008 +0800
6237 85xx: Fix the boot window issue
6239 If one custom board is using the 8MB flash, it is set
6240 as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
6241 The current start.S code will be broken at switch_as.
6243 It is because the TLB1[15] is set as 16MB page size,
6244 EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
6246 For the 8MB flash case, the EPN = 0xefxxxxxx,
6247 RPN = 0xffxxxxxx. Assume the virt address of switch_as
6248 is 0xef7ff18c, the real address of the instruction at
6249 switch_as should be 0xff7ff18c. the 0xff7ff18c is out
6250 of the range of the default 8MB boot LAW window
6251 0xff800000 - 0xffffffff.
6253 So when we switch to AS1 address space at switch_as,
6254 the core can't fetch the instruction at switch_as any
6255 more. It will cause broken issue.
6257 Signed-off-by: Dave Liu <daveliu@freescale.com>
6259 commit 58da8890d5fbd074746037722a423de9ac408616
6260 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
6261 Date: Thu Dec 11 15:47:50 2008 -0500
6263 sbc8548: use proper PHY address
6265 The values given for the PHY address were wrong, so the code
6266 read no valid PHY ID, and fell through to the generic PHY
6267 support, which would work on 1000M but would not auto negotiate
6268 down to 100M or 10M.
6270 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
6272 commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
6273 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
6274 Date: Thu Dec 11 15:47:51 2008 -0500
6276 sbc8548: enable command line editing by default.
6278 Lets make things a bit more user friendly. It isn't 1985 anymore.
6280 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
6282 commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
6283 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
6284 Date: Thu Dec 11 15:47:49 2008 -0500
6286 sbc8548: don't enable the 3rd and 4th eTSEC
6288 These interfaces don't have usable connectors on the board, so don't
6289 bother enumerating or configuring them.
6291 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
6293 commit 181a3650113883728927928b3ac81ad6dade4b2c
6294 Author: Haiying Wang <Haiying.Wang@freescale.com>
6295 Date: Wed Dec 3 10:08:19 2008 -0500
6297 Set IVPR to kenrel entry point in second core boot page
6299 Assuming the OSes exception vectors start from the base of kernel address, and
6300 the kernel physical starting address can be relocated to an non-zero address.
6301 This patch enables the second core to have a valid IVPR for debugger before
6302 kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
6303 value for second core which runs kernel at different physical address other
6306 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6308 commit a5d212a263c58cc746481bf1fc878510533ce7d6
6309 Author: Trent Piepho <tpiepho@freescale.com>
6310 Date: Wed Dec 3 15:16:34 2008 -0800
6312 mpc8xxx: LCRR[CLKDIV] is sometimes five bits
6314 On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
6317 In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It
6318 should be safe as the fifth bit was defined as reserved and set to 0.
6320 Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
6322 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
6323 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6324 Acked-by: Jon Loeliger <jdl@freescale.com>
6326 commit 58ec4866ed916c7e422f5107bb27b0822084728e
6327 Author: Trent Piepho <tpiepho@freescale.com>
6328 Date: Wed Dec 3 15:16:38 2008 -0800
6330 mpc8[56]xx: Put localbus clock in device tree
6332 Export the localbus frequency in the device tree, the same way the CPU, TB,
6333 CCB, and various other frequencies are exported in their respective device
6336 Some localbus devices need this information to be programed correctly, so
6337 it makes sense to export it along with the other frequencies.
6339 Unfortunately, when someone wrote the localbus dts bindings, they didn't
6340 bother to define what the "compatible" property should be. So it seems no
6341 one was quite sure what to put in their dts files.
6343 Based on current existing dts files in the kernel source, I've used
6344 "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
6345 of the 85xx devices, and are looked for by the Linux code. The eLBC is
6346 apparently not entirely backward compatible with the pq3 LBC and so eLBC
6347 equipped platforms like 8572 won't use pq3-localbus.
6349 For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
6350 and is also looked for by the Linux code. On MPC8641, I've also used
6351 "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
6352 which don't use "fsl,elbc" or any other acceptable name to match on.
6354 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
6355 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6356 Acked-by: Jon Loeliger <jdl@freescale.com>
6358 commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
6359 Author: Kumar Gala <galak@kernel.crashing.org>
6360 Date: Tue Dec 16 14:59:22 2008 -0600
6362 NAND FSL elbc: Use virt_to_phys to determine which bank is in use
6364 The current code that determines which bank/chipselect is used for a
6365 given NAND instance only worked for 32-bit addresses and assumed
6366 a 1:1 mapping. This breaks in 36-bit physical configs.
6368 The proper way to handle this is to use the virt_to_phys() and
6369 BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
6370 with the the virtual address the NAND code uses.
6372 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6373 Acked-by: Scott Wood <scottwood@freescale.com>
6375 commit 77c8115b1f1871811633eae77a5a700fac1f0e50
6376 Author: Kumar Gala <galak@kernel.crashing.org>
6377 Date: Tue Dec 16 14:59:21 2008 -0600
6379 ppc: Use addrmap in virt_to_phys and map_physmem.
6381 If we have addr map support enabled use the mapping functions to
6382 implement virt_to_phys() and map_physmem().
6384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6386 commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
6387 Author: Kumar Gala <galak@kernel.crashing.org>
6388 Date: Tue Dec 16 14:59:20 2008 -0600
6390 85xx: Add support to populate addr map based on TLB settings
6392 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6394 commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
6395 Author: Peter Tyser <ptyser@xes-inc.com>
6396 Date: Mon Dec 1 13:47:13 2008 -0600
6398 XPedite5200 board support
6400 Initial support for Extreme Engineering Solutions XPedite5200 -
6401 a MPC8548-based PMC single board computer.
6403 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6405 commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
6406 Author: Peter Tyser <ptyser@xes-inc.com>
6407 Date: Wed Oct 29 12:39:27 2008 -0500
6409 85xx: Enable inbound PCI config cycles for X-ES boards
6411 Update X-ES Freescale boards to allow inbound PCI configuration
6412 cycles when configured as agent/endpoint.
6414 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6416 commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
6417 Author: Peter Tyser <ptyser@xes-inc.com>
6418 Date: Wed Dec 17 16:36:23 2008 -0600
6420 XPedite5370 board support
6422 Initial support for Extreme Engineering Solutions XPedite5370 -
6423 a MPC8572-based 3U VPX single board computer with a PMC/XMC
6426 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6428 commit e92739d34e2d6b6aca93b2598248210710897ce8
6429 Author: Peter Tyser <ptyser@xes-inc.com>
6430 Date: Wed Dec 17 16:36:21 2008 -0600
6432 Add support for PCA953x I2C gpio devices
6434 Initial support for NXP's 4 and 8 bit I2C gpio expanders
6435 (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
6436 enables support for the devices while the CONFIG_CMD_PCA953X
6437 define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
6438 define enables an 'info' sub-command which provides summary
6439 information for the given pca953x device.
6441 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6443 commit 7a8979591171676417ab36852d8811a8c46accd8
6444 Author: Peter Tyser <ptyser@xes-inc.com>
6445 Date: Wed Oct 29 12:39:26 2008 -0500
6447 pci/fsl_pci_init: Enable inbound PCI config cycles
6449 Add fsl_pci_config_unlock() function to enable a
6450 PCI/PCIe interface configured in agent/endpoint mode to
6451 respond to inbound PCI configuration cycles.
6453 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6455 commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
6456 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6457 Date: Wed Dec 17 16:43:18 2008 +0100
6459 avr32: Remove second definition of virt_to_phys()
6461 The second definition introduced by 65e43a1063 conflicts with the
6464 Also, convert the existing definition to use phys_addr_t. The volatile
6465 qualifier is still needed due to brain damage elsewhere.
6467 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6469 commit b616f2b545f73757669b37386f0b37bb61fc6797
6470 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6471 Date: Mon Sep 8 22:27:18 2008 +0200
6473 MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
6475 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6476 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6478 commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
6479 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6480 Date: Tue Dec 16 22:10:31 2008 +0100
6482 MIPS: qemu_mips: update doc to use all disk and boot linux kernel
6484 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6485 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6487 commit 13095b2f07dacb1f863772266c1789d47a523a8a
6488 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6489 Date: Tue Dec 16 22:10:30 2008 +0100
6491 MIPS: qemu_mips: move env storage just after u-boot
6493 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6494 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6496 commit aced78d852d0b009e8aaa1445af8cb40861ee549
6497 Author: Wolfgang Denk <wd@denx.de>
6498 Date: Tue Dec 16 23:48:27 2008 +0100
6502 Signed-off-by: Wolfgang Denk <wd@denx.de>
6504 commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
6505 Author: Wolfgang Denk <wd@denx.de>
6506 Date: Tue Dec 16 23:13:46 2008 +0100
6508 include/configs/at91cap9adk.h: fix typo.
6510 Signed-off-by: Wolfgang Denk <wd@denx.de>
6512 commit 45ca04f2377361593151d2d4da51f8ba4832d233
6513 Author: Wolfgang Denk <wd@denx.de>
6514 Date: Tue Dec 16 22:32:25 2008 +0100
6516 board/trab/memory.c: Fix compile problems.
6518 Apply changes from commit 44b4dbed to board/trab/memory.c, too.
6520 Actually we'd need a major cleanup here - as it turns out,
6521 board/trab/memory.c is more or less a verbatim copy of
6522 post/drivers/memory.c ... but then, trab is EOL anyway,r
6523 so this is not worth the effort.
6525 Signed-off-by: Wolfgang Denk <wd@denx.de>
6527 commit ff49ea8977b56916edd5b1766d9939010e30b181
6528 Author: Scott Wood <scottwood@freescale.com>
6529 Date: Tue Dec 16 14:24:16 2008 -0600
6531 NAND: Mark the BBT as scanned prior to calling scan_bbt.
6533 Otherwise, recursion can occur if scan_bbt does not find a bad block
6534 table, and tries to write one, and the attempt to erase the BBT area
6535 causes a bad block check.
6537 Signed-off-by: Scott Wood <scottwood@freescale.com>
6539 commit 584eedab66d0828f2d571a24b10526c4e65f547b
6540 Author: Ilya Yanok <yanok@emcraft.com>
6541 Date: Thu Dec 11 05:51:57 2008 +0300
6543 jffs2: include <linux/mtd/compat.h> instead of defining own min_t
6545 Include <linux/mtd/compat.h> header for min_t definition instead of
6546 providing our own one. Removes warnings in case of OneNAND support
6549 Although I thinks it's a bit silly to include <linux/mtd/compat.h>
6552 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
6553 Acked-by: Stefan Roese <sr@denx.de>
6555 commit b1ffecec37b57a59c139042267faac458e5324e9
6556 Author: Becky Bruce <beckyb@kernel.crashing.org>
6557 Date: Wed Dec 3 23:04:37 2008 -0600
6559 powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
6561 Casting a pointer to a phys_addr_t when it's an unsigned long long
6562 on a 32-bit system without first casting to a non-pointer type
6563 generates a compiler warning. Fix this.
6565 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6567 commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
6568 Author: Wolfgang Denk <wd@denx.de>
6569 Date: Tue Dec 16 16:22:50 2008 +0100
6571 trab: make trab_fkt standalone code independent of libgcc
6573 Use our own local functions in lib_arm/ instead.
6575 Signed-off-by: Wolfgang Denk <wd@denx.de>
6577 commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
6578 Author: Wolfgang Denk <wd@denx.de>
6579 Date: Tue Dec 16 14:44:06 2008 +0100
6581 post/Makefile: fix dependency problem with parallel builds
6583 Parallel builds (using "make -jN") would occasionally fail with error
6585 ppc_4xxFP-objdump: string.o: File format not recognized
6587 post/libpost.a(cpu.o): In function `cpu_post_test':
6588 /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
6589 or similar. We now make sure to run the 'postdeps" step before
6590 attempting to build the specific POST libraries.
6592 Signed-off-by: Wolfgang Denk <wd@denx.de>
6594 commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
6595 Author: Wolfgang Denk <wd@denx.de>
6596 Date: Tue Dec 16 14:41:02 2008 +0100
6598 Makefile: fix dependency problem with parallel builds
6600 Parallel builds (using "make -jN") would occasionally fail with error
6602 include/autoconf.mk:212: *** missing separator. Stop.
6603 Line numbers and affected boards were changing. Obviously some
6604 Makefiles included autoconf.mk while it was still being written to.
6605 As a fix, we now write to a temporary file first and then rename it,
6606 so that it is really ready to use as soon as it appears.
6608 Signed-off-by: Wolfgang Denk <wd@denx.de>
6610 commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
6611 Author: Wolfgang Denk <wd@denx.de>
6612 Date: Tue Dec 16 01:02:17 2008 +0100
6614 Coding style cleanup, update CHANGELOG.
6616 Signed-off-by: Wolfgang Denk <wd@denx.de>
6618 commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
6619 Author: Mike Frysinger <vapier@gentoo.org>
6620 Date: Thu Dec 11 18:39:08 2008 -0500
6622 spi/stmicro: fix debug() display of cmd
6624 The stmicro_wait_ready() func tries to show the actual opcode that was sent
6625 to the device, but instead it displays the array pointer. Fix it to pull
6626 out the opcode from the start of the array.
6628 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6630 commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
6631 Author: Mike Frysinger <vapier@gentoo.org>
6632 Date: Thu Dec 11 06:23:37 2008 -0500
6634 env_sf: support embedded environments
6636 If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
6637 size is larger than the env size, then it means the env is embedded in a
6638 block. So we have to save/restore the part of the sector which is not the
6639 environment. Previously, saving the environment in SPI flash in this
6640 setup would probably brick the board as the rest of the sector tends to
6641 contain actual U-Boot data/code.
6643 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6644 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6646 commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
6647 Author: Timur Tabi <timur@freescale.com>
6648 Date: Wed Dec 3 11:28:30 2008 -0600
6650 i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
6652 All implementations of the functions i2c_reg_read() and
6653 i2c_reg_write() are identical. We can save space and simplify the
6654 code by converting these functions into inlines and putting them in
6657 Signed-off-by: Timur Tabi <timur@freescale.com>
6658 Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6660 commit e39cd81c44740d7355d277ed3d38536cbe1e003d
6661 Author: Dave Liu <daveliu@freescale.com>
6662 Date: Fri Dec 5 15:36:14 2008 +0800
6664 lib_ppc: rework the flush_cache
6666 - It is possible to miss flush/invalidate the last
6667 cache line, we fix it at here.
6668 - add the volatile and memory clobber.
6670 They are pointed by Scott Wood.
6672 Signed-off-by: Dave Liu <daveliu@freescale.com>
6674 commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
6675 Author: Kumar Gala <galak@kernel.crashing.org>
6676 Date: Sat Dec 13 17:20:28 2008 -0600
6678 Introduce addr_map library
6680 Add a library that helps in translating between virtual and physical
6681 addresses. This library can be useful as a simple means to implement
6682 map_physmem() and virt_to_phys() for platforms that need functionality
6683 beyond the simple 1:1 mapping.
6685 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6687 commit 65e43a10631537dcb92c302d36301a12308216c3
6688 Author: Kumar Gala <galak@kernel.crashing.org>
6689 Date: Sat Dec 13 17:20:27 2008 -0600
6691 Introduce virt_to_phys()
6693 virt_to_phys() returns the physical address given a virtual. In most
6694 cases this will be just the input value as the vast majority of
6695 systems run in a 1:1 mode.
6697 However in systems that are not running this way it should report the
6698 physical address or ~0 if no mapping exists for the given virtual
6701 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6703 commit 45845301af3de8675c1f7bbc815c6de35452605a
6704 Author: Yuri Tikhonov <yur@emcraft.com>
6705 Date: Sun Dec 7 22:12:50 2008 +0100
6707 POST Make: fix the sub-dir dependencies missing.
6709 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
6711 commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
6712 Author: Martin Michlmayr <tbm@cyrius.com>
6713 Date: Wed Aug 6 14:44:05 2008 +0300
6715 Fix a typo in fw_env.config
6717 Reported-by: Martin Michlmayr <tbm@cyrius.com>
6718 Signed-off-by: Wolfgang Denk <wd@denx.de>
6720 commit ba490b7761c62b549c222a9723e532dc801a3899
6721 Author: Peter Tyser <ptyser@xes-inc.com>
6722 Date: Mon Dec 1 16:22:45 2008 -0600
6724 Remove unused CONFIG_ADDR_STREAMING defines
6726 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6728 commit d16da93430520d3e46c1ab52eedacf36ab7a2311
6729 Author: Peter Tyser <ptyser@xes-inc.com>
6730 Date: Mon Nov 24 11:54:47 2008 -0600
6732 cmd_mem: Remove unused variable
6734 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6736 commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
6737 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6738 Date: Sun Dec 14 10:29:39 2008 +0100
6742 Also fix some minor typos.
6744 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6745 Signed-off-by: Wolfgang Denk <wd@denx.de>
6747 commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
6748 Author: Sergei Poselenov <sposelenov@emcraft.com>
6749 Date: Fri Sep 19 12:07:34 2008 +0200
6751 Remove compiler warning: target CPU does not support interworking
6753 This warning is issued by modern ARM-EABI GCC on non-thumb targets.
6755 Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
6756 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
6758 commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
6759 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6760 Date: Mon Nov 24 13:33:51 2008 +0100
6762 Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
6764 FDT support is used for both FIT style images and for architectures
6765 that can pass a fdt blob to an OS (ppc, m68k, sparc).
6767 For other architectures and boards which do not pass a fdt blob to an
6768 OS but want to use the new uImage format, we just need FIT support.
6770 Now we can have the 4 following configurations :
6772 1) FIT only CONFIG_FIT
6773 2) fdt blob only CONFIG_OF_LIBFDT
6774 3) both CONFIG_OF_LIBFDT & CONFIG_FIT
6777 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6779 commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
6780 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6781 Date: Wed Dec 10 15:13:32 2008 +0100
6783 ppc4xx: Disable EEPROM write access on PMC440 boards
6785 This patch disables EEPROM wrtie access by default on PMC440 board.
6787 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6789 commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
6790 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6791 Date: Wed Dec 10 15:12:56 2008 +0100
6793 ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
6795 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6797 commit 71fa0714fe5134bc8718c38d5261d267e88582ba
6798 Author: Stefan Roese <sr@denx.de>
6799 Date: Tue Nov 18 16:36:12 2008 +0100
6801 MIPS: Flush data cache upon relocation
6803 This patch now adds a flush to the data cache upon relocation. The
6804 current implementation is missing this. Only a comment states that it
6805 should be done. So let's really do it now.
6807 Signed-off-by: Stefan Roese <sr@denx.de>
6808 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6810 commit 44174343688dba32571a34550dba08971c65fef1
6811 Author: Stefan Roese <sr@denx.de>
6812 Date: Tue Nov 18 16:36:22 2008 +0100
6814 MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
6816 This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
6817 enables support for boards where the lowlevel initialization is
6818 already done when U-Boot runs (e.g. via OnChip ROM).
6820 This will be used in the upcoming VCTH board support.
6822 Signed-off-by: Stefan Roese <sr@denx.de>
6823 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6825 commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
6826 Author: Stefan Roese <sr@denx.de>
6827 Date: Wed Nov 12 13:18:02 2008 +0100
6829 MIPS: Add board_early_init_f() to init_sequence
6831 This patch adds the board_early_init_f() call to the MIPS init
6832 sequence. A weak dummy implementation is also added which can be
6833 overridden by a board specific version.
6835 This will be used by the upcoming VCTH board support.
6837 Signed-off-by: Stefan Roese <sr@denx.de>
6838 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6840 commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
6841 Author: Stefan Roese <sr@denx.de>
6842 Date: Wed Nov 12 13:18:19 2008 +0100
6844 MIPS: Add onenand_init() to board.c and move nand_init()
6846 This patch adds a call to onenand_init() for OneNAND support and moves
6847 the nand_init() call to an earlier place, so that the environment can
6848 be used from NAND and OneNAND.
6850 Signed-off-by: Stefan Roese <sr@denx.de>
6851 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6853 commit d8bbc51c7ba9b737a20984333d19fe28a3526431
6854 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6855 Date: Tue Dec 9 11:32:46 2008 +0900
6857 sh: Update sh2/sh2a timer
6859 Renesas SH2/SH2A timer broken.
6860 This patch fix timer function.
6862 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6863 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6865 commit a319f1496210117b73198e3d889ffffaf6825d00
6866 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6867 Date: Fri Dec 5 07:27:37 2008 +0100
6869 sh: r2dplus fix register access
6871 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6872 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6874 commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
6875 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6876 Date: Tue Dec 2 07:40:03 2008 +0100
6878 sh: r2dplus/lowlevel_init: coding style fix
6880 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6881 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6883 commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
6884 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6885 Date: Tue Nov 25 11:05:19 2008 +0900
6887 sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
6889 SH4 is different a value of CACHE_OC_NUM_ENTRIES and
6890 CACHE_OC_WAY_SHIFT every CPU.
6891 This patch corrects these values.
6893 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6894 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6896 commit e9d5f35497885b3c65d494d09a525d443dcccd3b
6897 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6898 Date: Thu Nov 20 16:44:42 2008 +0900
6900 sh: Update sh timer function
6902 Change to write/readX function and fix timer problem.
6904 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6905 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6907 commit b81786cff476c41e332eaeb679158f6527cd67d4
6908 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6909 Date: Tue Nov 4 11:58:58 2008 +0900
6911 sh: Migo-R: Update BSC value
6913 A value of BSC CS4 was wrong, Fixed it.
6915 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6916 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6918 commit 5783758fd260a02f44566ad8f29f899565cd0403
6919 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6920 Date: Mon Nov 17 16:52:09 2008 +0900
6922 sh: Update ms7722se board config
6924 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6925 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6927 commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
6928 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6929 Date: Mon Nov 17 16:53:09 2008 +0900
6931 sh: Update SuperH serial driver
6933 The address of SCFSR register is wrong at SH7720/SH7721.
6934 This patch fix this.
6936 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6937 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6939 commit 9a1d3557dcd47365c12eeab584b822e57d994352
6940 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6941 Date: Tue Nov 11 22:20:15 2008 +0100
6943 sh: fix rsk7203 and MigoR out of tree build
6945 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6946 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6948 commit 1951f847f0a851853871b613ad7cf21a5242226c
6949 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6950 Date: Wed Dec 10 14:41:25 2008 +0100
6952 ppc4xx: Update TEXT_BASE for CPCI405 boards
6954 This patch fixes building U-Boot for CPCI405 boards.
6956 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6957 Signed-off-by: Stefan Roese <sr@denx.de>
6959 commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
6960 Author: Stefan Roese <sr@denx.de>
6961 Date: Tue Dec 9 20:08:01 2008 +0100
6963 ppc4xx: Remove some features from ALPR to fit into 256k again
6965 Signed-off-by: Stefan Roese <sr@denx.de>
6967 commit 3b089e4f889a2902449d55e081c886ae607cae89
6968 Author: Stefan Roese <sr@denx.de>
6969 Date: Wed Dec 10 10:32:59 2008 +0100
6971 UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
6973 With this patch we set the type back to NONE upon failing UBI partition
6974 initialization. Otherwise further calls to the UBI subsystem would try
6975 to really access the non-existing UBI partition.
6977 Thanks to Michael Lawnick for pointing this out.
6979 Signed-off-by: Stefan Roese <sr@denx.de>
6981 commit 817329351639a8895cd9b87b33aeff043f3d5a44
6982 Author: Stefan Roese <sr@denx.de>
6983 Date: Wed Dec 10 10:28:33 2008 +0100
6985 UBI: Return -ENOMEM upon failing malloc
6987 Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
6990 Signed-off-by: Stefan Roese <sr@denx.de>
6992 commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
6993 Author: Ben Warren <biggerbadderben@gmail.com>
6994 Date: Tue Dec 9 23:34:15 2008 -0800
6996 Fix compile error in building MBX860T.
6998 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7000 commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
7001 Author: Michal Simek <monstr@monstr.eu>
7002 Date: Tue Nov 25 11:42:20 2008 +0100
7004 microblaze: Remove XUPV2P board
7008 Microblaze platforms use generic settings and to have
7009 many platforms is confusing that's why I decided to remove this
7010 platform from U-BOOT. ml401 tree is sufficient for covering
7011 all Microblaze platforms.
7013 This change will go through microblaze custodian tree.
7015 commit 99ba6f353582720defff6e6e6761dc455a207d31
7016 Author: Michal Simek <monstr@monstr.eu>
7017 Date: Mon Nov 24 18:25:41 2008 +0100
7019 microblaze: Remove CONFIG_LIBFDT due to error in common files
7021 commit e7d591e823a991513833af7030468409e25a3b13
7022 Author: Michal Simek <monstr@monstr.eu>
7023 Date: Mon Nov 24 11:43:00 2008 +0100
7025 microblaze: Fix ml401 uart16550 setting
7027 Signed-off-by: Michal Simek <monstr@monstr.eu>
7029 commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
7030 Author: Michal Simek <monstr@monstr.eu>
7031 Date: Mon Nov 24 11:38:22 2008 +0100
7033 microblaze: Set up relocation is done
7035 commit bcb6dd9187d4b23c748704767bd12d20c829e996
7036 Author: Mike Frysinger <vapier@gentoo.org>
7037 Date: Tue Dec 9 23:20:31 2008 -0500
7039 tools/netconsole: new script for working with netconsole over UDP
7041 While the doc/README.NetConsole does have a snippet for people to
7042 create their own netcat script, it's a lot easier to make a simple
7043 dedicated script and tell people to use it.
7045 Also spruce it up a bit to make it user friendly.
7047 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7049 commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
7050 Author: Sonic Zhang <Sonic.Zhang@analog.com>
7051 Date: Tue Dec 9 23:20:18 2008 -0500
7053 fs/fat: handle FAT on SATA
7055 The FAT file system driver should also handle FAT on SATA devices.
7057 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
7058 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7060 commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
7061 Author: Ben Warren <biggerbadderben@gmail.com>
7062 Date: Tue Dec 9 23:26:31 2008 -0800
7064 Fix compile error in building MBX860T.
7065 Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd
7067 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7069 commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
7070 Author: Jerry Van Baren <gvb.uboot@gmail.com>
7071 Date: Mon Nov 24 08:15:02 2008 -0500
7073 libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
7075 Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the
7076 following warnings from FDT:
7078 include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
7079 /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
7081 Fix: Protect the definition of uintptr_t when compiling on the host
7084 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7086 commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
7087 Author: Graeme Russ <graeme.russ@gmail.com>
7088 Date: Sat Nov 22 08:43:29 2008 +1100
7090 Moved sc520 PCI definitions to stand-alone file
7092 Signed Off By: Graeme Russ <graeme.russ@gmail.com>
7094 commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
7095 Author: Graeme Russ <graeme.russ@gmail.com>
7096 Date: Sat Nov 22 08:43:21 2008 +1100
7098 Fixed path to sc520 SSI include file
7100 Signed Off By: Graeme Russ <graeme.russ@gmail.com>
7102 commit d4f70da544c33db3e4fce6473dea4ecca4322545
7103 Author: Graeme Russ <graeme.russ@gmail.com>
7104 Date: Fri Nov 21 06:28:05 2008 +1100
7106 Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
7108 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
7110 commit c034075a713b60e654c64e88e87da29440f31bb4
7111 Author: Stefan Roese <sr@denx.de>
7112 Date: Wed Nov 12 13:30:10 2008 +0100
7114 serial: Add vcth UART driver
7116 This patch adds the UART driver for the upcoming VCTH board support.
7118 Signed-off-by: Stefan Roese <sr@denx.de>
7120 commit 142a80ffc3b537a9c45acd2444a42a77f147c602
7121 Author: Ilya Yanok <yanok@emcraft.com>
7122 Date: Thu Nov 13 19:49:36 2008 +0300
7124 jffs2: cache data_crc results
7126 As we moved data_crc() invocation from jffs2_1pass_build_lists() to
7127 jffs2_1pass_read_inode() data_crc is going to be calculated on each
7128 inode access. This patch adds caching of data_crc() results. There
7129 is no significant improvement in speed (because of flash access
7130 caching added in previous patch I think, crc in RAM is really fast)
7131 but this patch impacts memory usage -- every b_node structure uses
7132 12 bytes instead of 8.
7134 Signed-off-by: Alexey Neyman <avn@emcraft.com>
7135 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7137 commit 9b7076229ec6a958bd835ab70745f7676297ce82
7138 Author: Ilya Yanok <yanok@emcraft.com>
7139 Date: Thu Nov 13 19:49:35 2008 +0300
7141 jffs2: summary support
7143 This patch adds support for reading fs information from summary
7144 node instead of scanning full eraseblock.
7146 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7148 commit 70741004dc28946cd82c7af6789c4ddb3fc94526
7149 Author: Ilya Yanok <yanok@emcraft.com>
7150 Date: Thu Nov 13 19:49:34 2008 +0300
7152 jffs2: add buffer to cache flash accesses
7154 With this patch JFFS2 code allocates memory buffer of max_totlen size
7155 (size of the largest node, calculated during scan time) and uses it to
7156 store entire node. Speeds up loading. If malloc fails we use old ways
7159 Signed-off-by: Alexey Neyman <avn@emcraft.com>
7160 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7162 commit 8a36d31f72411144ac0412ee7e1880e801acd754
7163 Author: Ilya Yanok <yanok@emcraft.com>
7164 Date: Thu Nov 13 19:49:33 2008 +0300
7166 jffs2: rewrite jffs2 scanning code based on Linux one
7168 Rewrites jffs2_1pass_build_lists() function in style of Linux's
7169 jffs2_scan_medium() and jffs2_scan_eraseblock().
7171 - Caching flash acceses
7172 - Smart dealing with free space
7174 Signed-off-by: Alexey Neyman <avn@emcraft.com>
7175 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7177 commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
7178 Author: Ilya Yanok <yanok@emcraft.com>
7179 Date: Thu Nov 13 19:49:32 2008 +0300
7181 jffs2: add sector_size field to part_info structure
7183 This patch adds sector_size field to part_info structure (used
7186 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7188 commit f73846956778a7dfee83403ef9747aff77198848
7189 Author: Ilya Yanok <yanok@emcraft.com>
7190 Date: Thu Nov 13 19:49:31 2008 +0300
7192 jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
7194 We need to update i_version inside cycle to find really latest version
7195 inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
7196 dump_inode() instead of calling expensive jffs2_1pass_read_inode().
7198 Signed-off-by: Alexey Neyman <avn@emcraft.com>
7199 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7201 commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
7202 Author: Wolfgang Denk <wd@denx.de>
7203 Date: Tue Dec 9 23:13:51 2008 +0100
7205 evb64260: fix "cast to pointer from integer of different size" warnings
7207 Signed-off-by: Wolfgang Denk <wd@denx.de>
7209 commit d2776827315c3d469b8cb4cec14d58877798daa2
7210 Author: Stefan Althoefer <stefan.althoefer@web.de>
7211 Date: Sun Dec 7 19:39:11 2008 +0100
7213 USB: descriptor handling
7217 I found a bug when working with the u-boot USB subsystem on IXP425 processor
7218 (big endian Xscale aka ARMv5).
7219 I recognized that the second usb_endpoint_descriptor of the attached memory
7220 stick was corrupted.
7222 The reason for this are the packed structures below (either u-boot and
7226 /* Endpoint descriptor */
7227 struct usb_endpoint_descriptor {
7228 unsigned char bLength;
7229 unsigned char bDescriptorType;
7230 unsigned char bEndpointAddress;
7231 unsigned char bmAttributes;
7232 unsigned short wMaxPacketSize;
7233 unsigned char bInterval;
7234 unsigned char bRefresh;
7235 unsigned char bSynchAddress;
7237 } __attribute__ ((packed));
7238 /* Interface descriptor */
7239 struct usb_interface_descriptor {
7240 unsigned char bLength;
7241 unsigned char bDescriptorType;
7242 unsigned char bInterfaceNumber;
7243 unsigned char bAlternateSetting;
7244 unsigned char bNumEndpoints;
7245 unsigned char bInterfaceClass;
7246 unsigned char bInterfaceSubClass;
7247 unsigned char bInterfaceProtocol;
7248 unsigned char iInterface;
7250 unsigned char no_of_ep;
7251 unsigned char num_altsetting;
7252 unsigned char act_altsetting;
7253 struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
7254 } __attribute__ ((packed));
7257 As usb_endpoint_descriptor is only 7byte in length, the start of all
7258 odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
7259 of these structures also not word aligned.
7261 ARMv5 Architecture however does not support non-aligned multibyte
7262 data type (see A2.8 of ARM Architecture Reference Manual).
7264 Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
7265 Signed-off-by: Remy Böhmer <linux@bohmer.net>
7267 commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
7268 Author: Kumar Gala <galak@kernel.crashing.org>
7269 Date: Tue Dec 9 10:27:33 2008 -0600
7271 drivers/fsl_pci_init: Fix compile warning
7273 fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
7274 fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
7276 The check only makes sense if we are CONFIG_PHYS_64BIT
7278 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7280 commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
7281 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7282 Date: Sun Dec 7 09:45:35 2008 +0100
7284 usbtty/omap: update to current API
7286 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7287 Signed-off-by: Remy Böhmer <linux@bohmer.net>
7289 commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
7290 Author: Anatolij Gustschin <agust@denx.de>
7291 Date: Tue Dec 9 17:52:05 2008 +0100
7293 video: fix FADS823 and RRvision compiling issues
7295 Since commit 561858ee building for FADS823 and RRvision
7296 doesn't work. Let's include version.h and timestamp.h
7297 unconditionally to fix the problem.
7299 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7301 commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
7302 Author: Stefan Roese <sr@denx.de>
7303 Date: Tue Dec 2 10:53:47 2008 +0100
7305 UBI: Fix size parsing in "ubi create"
7307 Signed-off-by: Stefan Roese <sr@denx.de>
7309 commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
7310 Author: Stefan Roese <sr@denx.de>
7311 Date: Thu Nov 27 14:07:09 2008 +0100
7313 UBI: Enable re-initializing of the "ubi part" command
7315 With this patch now, the user can call "ubi part" multiple times to
7316 re-connect the UBI device to another MTD partition.
7318 Signed-off-by: Stefan Roese <sr@denx.de>
7320 commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
7321 Author: Stefan Roese <sr@denx.de>
7322 Date: Thu Nov 27 14:05:15 2008 +0100
7324 MTD: Fix problem based on non-working relocation (list head mtd_partitions)
7326 Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
7327 first call of add_mtd_partitions(). Otherwise this won't work on platforms
7328 where the relocation is broken (like MIPS or PPC).
7330 Signed-off-by: Stefan Roese <sr@denx.de>
7332 commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
7333 Author: Trent Piepho <tpiepho@freescale.com>
7334 Date: Wed Nov 12 17:29:48 2008 -0800
7336 Section name should be ".data", not "data"
7338 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
7339 Signed-off-by: Wolfgang Denk <wd@denx.de>
7341 commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
7342 Author: Wolfgang Denk <wd@denx.de>
7343 Date: Tue Dec 9 00:39:08 2008 +0100
7345 MAKEALL: Automatically use parallel builds
7347 Add logic to the MAKEALL script to determine the number of CPU cores
7348 on the system, and run a parallel build if there is more than one.
7349 Usually this significantrly accelerates builds.
7351 Allow to manually adjust the number of parallel make jobs by using
7352 the "BUILD_NCPUS" environment variable.
7354 Signed-off-by: Wolfgang Denk <wd@denx.de>
7356 commit 268405fa7c44156c5192a70779920c70906af8d6
7357 Author: Wolfgang Denk <wd@denx.de>
7358 Date: Tue Dec 9 00:24:30 2008 +0100
7360 vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
7362 Signed-off-by: Wolfgang Denk <wd@denx.de>
7364 commit 153176a9414120ca1736f3cc4951623d6e14e6af
7365 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7366 Date: Tue Nov 11 06:08:59 2008 +0100
7368 avr32/bootm: remove unused variable 'ret'
7370 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7371 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7373 commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
7374 Author: Peter Tyser <ptyser@xes-inc.com>
7375 Date: Wed Nov 12 13:06:48 2008 -0600
7377 Remove unneeded CONFIG_SHELL references
7379 Make should be using the bash shell by default which makes
7380 CONFIG_SHELL unnecessary
7382 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7384 commit cf7a7b99794bac936899819b95539be1dbd71708
7385 Author: Peter Tyser <ptyser@xes-inc.com>
7386 Date: Wed Nov 12 12:33:20 2008 -0600
7388 Use bash for default GNU Make shell application
7390 Some Make script commands rely on bash-specific features like brace
7391 expansion, so default to bash for the SHELL variable with a fallback
7392 to the standard sh shell
7394 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7396 commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
7397 Author: Heiko Schocher <hs@denx.de>
7398 Date: Wed Nov 12 09:50:45 2008 +0100
7400 jffs2: rename devices_init () in common/jffs2.c
7402 rename devices_init () in common/jffs2.c to
7403 jffs2_devices_init (), because there is also a
7404 devices_init () in common/devices.c.
7406 Signed-off-by: Heiko Schocher <hs@denx.de>
7408 commit af5eb847a10f1037590001355d88bab3fe7be48b
7409 Author: Daniel Hellstrom <daniel@gaisler.com>
7410 Date: Mon Nov 10 12:46:20 2008 +0000
7412 SPARC: Fixed compiler error introduced by commit c160a9544743
7414 This patch fixes a build error for the SPARC platform. It was
7415 introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
7417 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
7419 commit 4c60259899aa00f59db0d936b8807f9a26411c0f
7420 Author: Gary Jennejohn <garyj@denx.de>
7421 Date: Sun Nov 9 12:50:59 2008 +0100
7423 mgsuvd add the board-specific part of the HDLC driver
7425 Signed-off-by: Gary Jennejohn <garyj@denx.de>
7427 commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
7428 Author: Gary Jennejohn <garyj@denx.de>
7429 Date: Sun Nov 9 12:45:03 2008 +0100
7431 mgcoge add the board-specific part of the HDLC driver
7433 Signed-off-by: Gary Jennejohn <garyj@denx.de>
7435 commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
7436 Author: Gary Jennejohn <garyj@denx.de>
7437 Date: Sun Nov 9 12:36:15 2008 +0100
7439 keymile add the common parts of the HDLC driver
7441 This implements the ICN protocol used across the backplane and is
7442 needed by all the keymile boards.
7444 Signed-off-by: Gary Jennejohn <garyj@denx.de>
7446 commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
7447 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7448 Date: Fri Nov 7 22:46:22 2008 +0100
7450 drivers/bios_emulator: Move conditional compilation to Makefile
7452 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7454 commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
7455 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7456 Date: Thu Nov 6 14:01:51 2008 -0500
7458 common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
7460 Corrected endian order printing for compact flash serial number.
7462 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7464 commit 16a28ef219c27423a1ef502f19070c4d375079b8
7465 Author: Gary Jennejohn <garyj@denx.de>
7466 Date: Thu Nov 6 15:04:23 2008 +0100
7468 IOMUX: Add console multiplexing support.
7470 Modifications to support console multiplexing. This is controlled using
7471 CONFIG_SYS_CONSOLE_MUX in the board configuration file.
7473 This allows a user to specify multiple console devices in the environment
7474 with a command like this: setenv stdin serial,nc. As a result, the user can
7475 enter text on both the serial and netconsole interfaces.
7477 All devices - stdin, stdout and stderr - can be set in this manner.
7479 1) common/iomux.c and include/iomux.h contain the environment setting
7481 2) doc/README.iomux contains a somewhat more detailed description.
7482 3) The implementation in (1) is called from common/cmd_nvedit.c to
7483 handle setenv and from common/console.c to handle initialization of
7484 input/output devices at boot time.
7485 4) common/console.c also contains the code needed to poll multiple console
7486 devices for input and send output to all devices registered for output.
7487 5) include/common.h includes iomux.h and common/Makefile generates iomux.o
7488 when CONFIG_SYS_CONSOLE_MUX is set.
7490 Signed-off-by: Gary Jennejohn <garyj@denx.de>
7492 commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
7493 Author: Mike Frysinger <vapier@gentoo.org>
7494 Date: Tue Nov 4 16:03:46 2008 -0500
7496 strings: use puts() rather than printf()
7498 When running `strings` on really long strings, the stack tends to get
7499 smashed due to printf(). Switch to puts() instead since we're only passing
7502 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7504 commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
7505 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
7506 Date: Mon Nov 3 22:16:18 2008 +0100
7508 Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
7510 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
7512 commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
7513 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
7514 Date: Mon Nov 3 22:15:34 2008 +0100
7516 cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
7518 - fix size too small by one in sprintf
7519 - changed old (pre 2004) device name ibmEmac to emac
7520 - boot device may be overriden in board config
7521 - servername may be defined in board config
7522 - additional parameters may be defined in board config
7523 - fixed some line wrappings
7524 - replaced redundant MAX define by max
7526 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
7528 commit e9084b23d16102f44ace24379a1c0c352497ef80
7529 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
7530 Date: Mon Nov 3 22:14:36 2008 +0100
7532 Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
7534 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
7536 commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
7537 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
7538 Date: Mon Nov 3 22:13:47 2008 +0100
7540 README: Document CONFIG_SYS parameters for vxworks
7542 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
7544 commit ace514837cac656e29c37a19569cb8ea83071126
7545 Author: Peter Tyser <ptyser@xes-inc.com>
7546 Date: Fri Oct 31 11:12:38 2008 -0500
7548 lcd: Let the board code show board-specific info cleanup
7550 remove unneeded version.h from lcd.c
7552 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7553 Signed-off-by: Wolfgang Denk <wd@denx.de>
7555 commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
7556 Author: Peter Tyser <ptyser@xes-inc.com>
7557 Date: Mon Nov 3 09:30:59 2008 -0600
7559 Update U-Boot's build timestamp on every compile
7561 Use the GNU 'date' command to auto-generate a new U-Boot
7562 timestamp on every compile.
7564 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7566 commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
7567 Author: Remy Bohmer <linux@bohmer.net>
7568 Date: Thu Dec 4 22:25:57 2008 +0100
7570 Remove redundant armv4 flag from arm926ejs compile flags
7572 Currently the arm926ejs tree has the armv4 option set during compilation.
7573 This flag does not belong here because a arm926 CPU is always a armv5 CPU.
7575 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7577 commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
7578 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
7579 Date: Sat Dec 6 13:11:14 2008 +0100
7581 at91: Choose environment variables location within make config target
7583 This patch adds the possiblity to choose the media where the environment will
7584 be located. This allow to choose this fundamental configuration without editing
7587 Documentation file added.
7589 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
7590 Acked-by: Stelian Pop <stelian@popies.net>
7591 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7593 commit 1450c4a6682378567030414a9f1198c39b7730c7
7594 Author: Anatolij Gustschin <agust@denx.de>
7595 Date: Mon Nov 3 15:30:34 2008 +0100
7597 lwmon, tqm8xx: Fix build errors
7599 Commit 6b59e03e0237a40a2305ea385defdfd92000978b
7600 lcd: Let the board code show board-specific info
7602 introduced some bugs which prevent U-Boot building
7603 for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
7604 be defined in the board configuration.
7606 Also "LCD enabled" building for TQM823L doesn't work
7609 This patch fixes above-mentioned issues.
7611 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7613 commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
7614 Author: Mike Frysinger <vapier@gentoo.org>
7615 Date: Sun Nov 2 01:18:18 2008 -0400
7617 ignore .gdb_history files
7619 When using gdb, history files will often get generated. So ignore them.
7621 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7623 commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
7624 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7625 Date: Fri Oct 31 12:26:55 2008 +0100
7627 FPGA: move fpga drivers to drivers/fpga
7629 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7631 commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
7632 Author: Peter Tyser <ptyser@xes-inc.com>
7633 Date: Mon Dec 1 16:29:38 2008 -0600
7635 net: Fix TftpStart() ip:filename bug
7637 The TftpStart() function modifies the 'BootFile'
7638 string when 'BootFile' contains both an IP address
7639 and filename (eg 1.2.3.4:/path/file). This causes
7640 subsequent calls to TftpStart to incorrectly parse
7641 the TFTP filename and server IP address to use.
7644 => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
7645 Speed: 100, half duplex
7647 TFTP from server 10.52.0.62; our IP address is 10.52.253.79
7649 Filename '/home/ptyser/non_existant'.
7650 ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
7651 Load address: 0x100000
7653 TFTP error: 'File not found' (1)
7657 Speed: 100, half duplex
7659 TFTP from server 10.52.0.33; our IP address is 10.52.253.79
7661 Filename '10.52.0.62'.
7663 Load address: 0x100000
7665 TFTP error: 'File not found' (1)
7668 TftpStart() was modified to not modify the 'BootFile' string.
7670 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7671 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7673 commit d32c5be50bf0600bfdc54223ef341ee9c63db445
7674 Author: Peter Tyser <ptyser@xes-inc.com>
7675 Date: Mon Dec 1 16:26:21 2008 -0600
7677 net: Add additional IP fragmentation check
7679 Ignore IP packets which have the "more fragments" flag bit
7680 set. This flag indicates the IP packet is fragmented and
7681 must be ignored by U-Boot.
7683 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7684 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7686 commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
7687 Author: Peter Tyser <ptyser@xes-inc.com>
7688 Date: Mon Dec 1 16:26:20 2008 -0600
7690 net: Define IP flag field values
7692 These defines were pulled from the "Add simple
7693 IP/UDP fragmentation support" patch from Frank
7694 Haverkamp <haver@vnet.ibm.com>.
7696 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7697 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7699 commit 23afaba65ec5206757e589ef334a8b38168c045f
7700 Author: Anatolij Gustschin <agust@denx.de>
7701 Date: Tue Dec 2 10:31:04 2008 +0100
7703 net: tsec: Fix Marvell 88E1121R phy init
7705 This patch tries to ensure that phy interrupt pin
7706 won't be asserted after booting. We experienced
7707 following issues with current 88E1121R phy init:
7709 Marvell 88E1121R phy can be hardware-configured
7710 to share MDC/MDIO and interrupt pins for both ports
7711 P0 and P1 (e.g. as configured on socrates board).
7712 Port 0 interrupt pin will be shared by both ports
7713 in such configuration. After booting Linux and
7714 configuring eth0 interface, port 0 phy interrupts
7715 are enabled. After rebooting without proper eth0
7716 interface shutdown port 0 phy interrupts remain
7717 enabled so any change on port 0 (link status, etc.)
7718 cause assertion of the interrupt. Now booting Linux
7719 and configuring eth1 interface will cause permanent
7720 phy interrupt storm as the registered phy 1 interrupt
7721 handler doesn't acknowledge phy 0 interrupts. This
7722 of course should be fixed in Linux driver too.
7724 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7725 Acked-by: Andy Fleming <afleming@freescale.com>
7726 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7728 commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
7729 Author: Peter Tyser <ptyser@xes-inc.com>
7730 Date: Tue Dec 2 12:59:51 2008 -0600
7732 net: Fix download command parsing
7734 When CONFIG_SYS_HUSH_PARSER is defined network download
7735 commands with 1 argument in the format 'tftp "/path/file"'
7736 do not work as expected. The hush command parser strips
7737 the quotes from "/path/file" which causes the network
7738 commands to interpret "/path/file" as an address
7739 instead of the intended filename.
7741 The previous check for a leading quote in netboot_common()
7742 was replaced with a check which ensures only valid
7743 numbers are treated as addresses.
7745 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7746 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7748 commit 3c2c2f427905040c1513d0c51d637689cba48346
7749 Author: Remy Bohmer <linux@bohmer.net>
7750 Date: Thu Nov 27 22:30:27 2008 +0100
7752 Remove non-ascii characters from fat code
7754 This code contains some non-ascii characters in comment lines and code.
7755 Most editors do not display those characters properly and editing those
7756 files results always in diffs at these places which are usually not required
7757 to be changed at all. This is error prone.
7759 So, remove those weird characters and replace them by normal C-style
7760 equivalents for which the proper defines were already in the header.
7762 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7764 commit dc889e865356497d3e495570118c2245ebce2631
7765 Author: Dave Liu <daveliu@freescale.com>
7766 Date: Fri Nov 28 20:16:58 2008 +0800
7768 85xx: fix the wrong DDR settings for MPC8572DS
7770 The default DDR freq is 400MHz or 800M data rate,
7771 the old settings is pure wrong for the default case.
7773 Signed-off-by: Dave Liu <daveliu@freescale.com>
7774 Acked-by: Andy Fleming <afleming@freescale.com>
7776 commit 9df59533f77de2829b4b66e5b7620e04edaa391c
7777 Author: Kumar Gala <galak@kernel.crashing.org>
7778 Date: Mon Nov 24 10:29:26 2008 -0600
7780 85xx: init gd as early as possible
7782 Moved up the initialization of GD so C code like set_tlb() can use
7783 gd->flags to determine if we've relocated or not in the future.
7785 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7786 Acked-by: Andy Fleming <afleming@freescale.com>
7788 commit aed461af81012a398a205e9be67ab37667491838
7789 Author: Kumar Gala <galak@kernel.crashing.org>
7790 Date: Mon Nov 24 10:29:25 2008 -0600
7792 85xx: Fix relocation of CCSRBAR
7794 If the virtual address for CCSRBAR is the same after relocation but
7795 the physical address is changing we'd end up having two TLB entries with
7796 the same VA. Instead we new us the new CCSRBAR virt address + 4k as a
7797 temp virt address to access the old CCSRBAR to relocate it.
7799 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7800 Acked-by: Andy Fleming <afleming@freescale.com>
7802 commit ea154a1781135d822eedee7567cc156089eae93c
7803 Author: Kumar Gala <galak@kernel.crashing.org>
7804 Date: Mon Nov 24 10:25:14 2008 -0600
7806 FSL: Moved BR_PHYS_ADDR for localbus to common header
7808 The BR_PHYS_ADDR macro is useful on all machines that have local bus
7809 which is pretty much all 83xx/85xx/86xx chips.
7811 Additionally most 85xx & 86xx will need it if they want to support
7812 36-bit physical addresses.
7814 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7815 Acked-by: Andy Fleming <afleming@freescale.com>
7817 commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
7818 Author: Peter Tyser <ptyser@xes-inc.com>
7819 Date: Mon Dec 1 13:47:12 2008 -0600
7821 85xx: Add PORDEVSR_PCI1 define
7823 Add define used to determine if PCI1 interface is in PCI or PCIX mode.
7825 Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
7827 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7828 Signed-off-by: Andy Fleming <afleming@freescale.com>
7830 commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
7831 Author: Becky Bruce <becky.bruce@freescale.com>
7832 Date: Fri Nov 21 19:24:22 2008 -0600
7834 drivers/fsl_pci_init: Fix inbound window mapping bug
7836 The current code will cause the creation of a 4GB window
7837 starting at 0 if we have more than 4GB of RAM installed,
7838 which overlaps with PCI_MEM space and causes pci_bus_to_phys()
7839 to return erroneous information. Limit the size to 4GB - 1;
7840 which causes the code to create one 2GB and one 1GB window
7843 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7844 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7845 Acked-by: Andy Fleming <afleming@freescale.com>
7847 commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
7848 Author: Jon Loeliger <jdl@freescale.com>
7849 Date: Thu Nov 20 15:36:48 2008 -0600
7851 Removed unused CONFIG_L1_INIT_RAM symbol.
7853 Prevent further viral propogation of the unused
7854 symbol CONFIG_L1_INIT_RAM by just removing it.
7856 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7857 Acked-by: Andy Fleming <afleming@freescale.com>
7859 commit 7008d26a40a76f90cae5824c812cfed449fb97b8
7860 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
7861 Date: Wed Oct 29 09:21:44 2008 -0500
7863 fsl ddr skip interleaving if not supported.
7865 Removed while(1) hang if memctl_intlv_ctl is set wrong.
7866 Remove embedded tabs from strings.
7868 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
7869 Acked-by: Kumar Gala <galak@kernel.crashing.org>
7870 Acked-by: Andy Fleming <afleming@freescale.com>
7872 commit dd332e18d082de75eca3fc2c7c778f5d4571a096
7873 Author: Anatolij Gustschin <agust@denx.de>
7874 Date: Thu Nov 13 18:08:57 2008 +0100
7876 85xx: socrates: fix DDR SDRAM tlb entry configuration
7878 since commit be0bd8234b9777ecd63c4c686f72af070d886517
7879 tlb entry for socrates DDR SDRAM will be reconfigured
7880 by setup_ddr_tlbs() from initdram() causing an
7881 inconsistency with previously configured DDR SDRAM tlb
7882 entry from tlb_table:
7885 IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS
7886 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX
7887 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX
7888 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX
7890 This patch makes the presence of the DDR SDRAM tlb entry in
7891 the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
7894 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7895 Acked-by: Andy Fleming <afleming@freescale.com>
7897 commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
7898 Author: Peter Tyser <ptyser@xes-inc.com>
7899 Date: Tue Nov 11 10:17:10 2008 -0600
7901 85xx: Add CPU 2 errata workaround to all 8548 boards
7903 All mpc8548-based boards should implement the suggested workaround
7904 to CPU 2 errata. Without the workaround, its possible for the
7905 8548's core to hang while executing a msync or mbar 0 instruction
7906 and a snoopable transaction from an I/O master tagged to make
7907 quick forward progress is present.
7909 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7910 Acked-by: Andy Fleming <afleming@freescale.com>
7912 commit e57f0fa1333cdf3ca36110aac2900712a5f82976
7913 Author: Dave Liu <daveliu@freescale.com>
7914 Date: Tue Oct 28 17:53:45 2008 +0800
7916 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
7918 we need TLB entry for DDR at !SPD case.
7920 Signed-off-by: Dave Liu <daveliu@freescale.com>
7921 Acked-by: Andy Fleming <afleming@freescale.com>
7923 commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
7924 Author: Dave Liu <daveliu@freescale.com>
7925 Date: Tue Oct 28 17:53:38 2008 +0800
7927 85xx: remove the unused ddr_enable_ecc in the board file
7929 The DDR controller of 8548/8544/8568/8572/8536 processors
7930 have the ECC data init feature, and the new DDR code is
7931 using the feature, and we don't need the way with DMA to
7932 init memory any more.
7934 Signed-off-by: Dave Liu <daveliu@freescale.com>
7935 Acked-by: Andy Fleming <afleming@freescale.com>
7937 commit 4a129a57d923f7c15aa1f567028a80a32d66a100
7938 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7939 Date: Sun Nov 30 19:36:53 2008 +0100
7941 at91rm9200dk: Fix typo
7943 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7945 commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
7946 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7947 Date: Sun Nov 30 19:36:50 2008 +0100
7949 AT91: remove non supported board AT91RM9200DF macro
7951 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7953 commit bd876772ee04095e5dd943d97515a1f14bad4b1c
7954 Author: Ilko Iliev <iliev@ronetix.at>
7955 Date: Tue Dec 2 17:27:54 2008 +0100
7957 mtd/dataflash.c: fix a problem with the last partition
7959 This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
7960 partition can be defined to use the area to the end of dataflash size.
7961 Now it is possible to have only one dataflash partition from 0 to the end
7962 of of dataflash size.
7964 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
7966 commit 03f797793b124dccaae145b977d15d6cb9e74504
7967 Author: Ilko Iliev <iliev@ronetix.at>
7968 Date: Tue Dec 2 17:20:17 2008 +0100
7970 fix some coding style violations.
7972 This patch fix some coding style violations.
7974 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
7976 commit 5e46b1e54112f4b7fd5185665e571510132c12a7
7977 Author: Stefan Roese <sr@denx.de>
7978 Date: Thu Nov 27 14:11:37 2008 +0100
7980 OneNAND: Add missing mtd info struct before calling onenand_erase()
7982 Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
7983 for use in UBI) via CONFIG_MTD_PARTITIONS.
7985 Signed-off-by: Stefan Roese <sr@denx.de>
7986 Signed-off-by: Scott Wood <scottwood@freescale.com>
7988 commit 29382d4064fbaff5daacff4c3209370fa5713966
7989 Author: Becky Bruce <becky.bruce@freescale.com>
7990 Date: Thu Nov 20 16:43:52 2008 -0600
7992 mpc8641: Fix error in README
7994 I made some updates to the code that didn't make it into the
7997 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
7999 commit 801a194616d95e6fc426a176d9615ccbf9876c7f
8000 Author: Jon Loeliger <jdl@freescale.com>
8001 Date: Thu Nov 20 12:01:02 2008 -0600
8003 Removed unused CONFIG_L1_INIT_RAM symbol.
8005 Prevent further viral propogation of the unused
8006 symbol CONFIG_L1_INIT_RAM by just removing it.
8008 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8010 commit f698738e46cb461e28c2d58228bb34a2fcf5a475
8011 Author: Jon Loeliger <jdl@freescale.com>
8012 Date: Thu Nov 20 14:02:56 2008 -0600
8014 86xx: Fix non-64-bit compilation problems.
8016 Introducing 64-bit (36-bit) support for the MPC8641HPCN
8017 failed to accomodate the other two 86xx boards.
8018 Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
8019 CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
8020 with nominal 32-bit values.
8022 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8023 Acked-by: Becky Bruce <becky.bruce@freescale.com>
8025 commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
8026 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8027 Date: Wed Nov 26 17:40:37 2008 +0100
8029 Remove obsolete command (apply afte USB style patch, 80 chars strict)
8031 Remove USB obsolete commmand
8033 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8034 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8036 commit de39f8c19d7c12017248c49d432dcb81db68f724
8037 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8038 Date: Wed Nov 26 17:41:34 2008 +0100
8040 USB style patch, 80 chars strict
8042 USB Code style patch
8044 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8045 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8047 commit d10c5a87cb8affbb4d35a311370316d4383d598e
8048 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8049 Date: Fri Nov 7 22:46:21 2008 +0100
8051 drivers/usb: Move conditional compilation to Makefile
8053 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8054 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8056 commit 2077e348c2a84901022ad95311b47b70361e6daa
8057 Author: Scott Wood <scottwood@freescale.com>
8058 Date: Tue Nov 25 10:47:02 2008 -0600
8060 NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
8062 This caused the operation to be needlessly repeated if there were
8063 no bad blocks and no errors.
8065 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
8066 Signed-off-by: Scott Wood <scottwood@freescale.com>
8068 commit 89295028e7d8f7a524f485328279d72fdb102385
8069 Author: Michal Simek <monstr@monstr.eu>
8070 Date: Mon Nov 24 12:09:50 2008 +0100
8072 ppc4xx: ml300 remove Xilinx BSP from ml300 folder
8074 This BSP should be outside u-boot source tree.
8075 The second reason is that xilinx ppc405 was moved to generic platform.
8077 Signed-off-by: Michal Simek <monstr@monstr.eu>
8078 Signed-off-by: Stefan Roese <sr@denx.de>
8080 commit 24eea623d4974a169026a975ba12fb23d48154b1
8081 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8082 Date: Mon Nov 24 15:11:10 2008 +0100
8084 ppc4xx: Remove unused features
8086 This patch disables some unused features from the PCI405 configuration
8087 to keep U-Boot image size below 192k.
8089 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8090 Signed-off-by: Stefan Roese <sr@denx.de>
8092 commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
8093 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8094 Date: Mon Nov 24 15:11:09 2008 +0100
8096 ppc4xx: Use correct io accessors for PCI405
8098 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8099 Signed-off-by: Stefan Roese <sr@denx.de>
8101 commit 348c849d86a6f0785752b9bc497a34658713d1d1
8102 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8103 Date: Mon Nov 24 15:11:08 2008 +0100
8105 ppc4xx: Remove unused code from PCI405 code
8107 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8108 Signed-off-by: Stefan Roese <sr@denx.de>
8110 commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
8111 Author: Heiko Schocher <hs@denx.de>
8112 Date: Thu Nov 20 09:59:09 2008 +0100
8114 powerpc, keymile boards: extract identical config options
8116 This patch extracts the identical config options for the
8117 keymile boards mgcoge, mgsuvd and kmeter1 in a new
8118 common config file keymile-common.h.
8120 Signed-off-by: Heiko Schocher <hs@denx.de>
8121 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8123 commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
8124 Author: Heiko Schocher <hs@denx.de>
8125 Date: Fri Nov 21 08:29:40 2008 +0100
8127 powerpc: keymile: Add a check for the PIGGY debug board
8129 Check the presence of the PIGGY on the keymile boards mgcoge,
8130 mgsuvd and kmeter1. If the PIGGY is not present, dont register
8131 this Ethernet device.
8133 Signed-off-by: Heiko Schocher <hs@denx.de>
8134 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8136 commit 58c696eed839af894e0265064669c402dc28b371
8137 Author: Wolfgang Denk <wd@xpert.denx.de>
8138 Date: Mon Nov 24 21:50:59 2008 +0100
8140 AT91RM9200DK: fix broken boot from NOR flash
8142 Signed-off-by: Wolfgang Denk <wd@denx.de>
8144 commit 8052352f20b33bef8f9872fc983eac73d4693c38
8145 Author: Jens Scharsig <esw@bus-elektronik.de>
8146 Date: Tue Nov 18 10:48:46 2008 +0100
8148 at91rm9200: fix broken boot from nor flash
8150 This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
8151 CONFIG_AT91RM9200 is defined and nor preloader is used.
8153 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
8155 commit 25ea652e907516a283b38237e83712a918f125d7
8156 Author: Piotr Ziecik <kosmo@semihalf.com>
8157 Date: Mon Nov 17 15:58:00 2008 +0100
8159 UBI: Add proof-of-concept CFI flash support
8161 With this patch UBI can be used on CFI flash chips.
8163 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
8164 Signed-off-by: Stefan Roese <sr@denx.de>
8166 commit e6a7edbc1778d27431ac663b40a71dafa5d20578
8167 Author: Piotr Ziecik <kosmo@semihalf.com>
8168 Date: Mon Nov 17 15:57:59 2008 +0100
8170 mtd: Remove a printf() from add_mtd_device().
8172 Remove a printf() from add_mtd_device(), which produces spurious output.
8174 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
8175 Signed-off-by: Stefan Roese <sr@denx.de>
8177 commit 91809ed51d8327a8dbbf29aa98a091154c282171
8178 Author: Piotr Ziecik <kosmo@semihalf.com>
8179 Date: Mon Nov 17 15:57:58 2008 +0100
8181 cfi-mtd: Add cfi-mtd driver.
8183 Add cfi-mtd driver, which exports CFI flash to MTD layer.
8184 This allows CFI flash devices to be used from MTD layer.
8186 Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
8187 option. Initialization is done by calling cfi_mtd_init() from
8190 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
8191 Signed-off-by: Stefan Roese <sr@denx.de>
8193 commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
8194 Author: Piotr Ziecik <kosmo@semihalf.com>
8195 Date: Mon Nov 17 15:49:32 2008 +0100
8197 cfi_flash: Add interface for flash verbosity control
8199 Add interface for flash verbosity control. It allows
8200 to disable output from low-level flash API. It is useful
8201 when calling these low-level functions from context other
8202 than flash commands (for example the MTD/CFI interface
8205 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
8206 Signed-off-by: Stefan Roese <sr@denx.de>
8208 commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
8209 Author: Piotr Ziecik <kosmo@semihalf.com>
8210 Date: Thu Nov 20 15:17:38 2008 +0100
8212 cfi_flash: Export flash_sector_size() function.
8214 Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
8215 so that it can be used in the upcoming cfi-mtd driver.
8217 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
8218 Signed-off-by: Stefan Roese <sr@denx.de>
8220 commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
8221 Author: Stefan Roese <sr@denx.de>
8222 Date: Mon Nov 17 14:45:22 2008 +0100
8224 cfi_flash: Make all flash access functions weak
8226 This patch defines all flash access functions as weak so that
8227 they can be overridden by board specific versions.
8229 This will be used by the upcoming VCTH board support where the NOR
8230 FLASH unfortunately can't be accessed memory-mapped. Special
8231 accessor functions are needed here.
8233 To enable this weak functions you need to define
8234 CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
8235 Otherwise the "old" default functions will be used resulting
8238 Signed-off-by: Stefan Roese <sr@denx.de>
8239 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8241 commit a5c4067017631d903e1afa6ad615f0ce19fea517
8242 Author: Stefan Roese <sr@denx.de>
8243 Date: Mon Nov 24 08:31:16 2008 +0100
8245 UBI: Change parsing of size in commands to default to hex
8247 Currently the size parameters of the UBI commands (e.g. "ubi write") are
8248 decoded as decimal instead of hex as default. This patch now interprets
8249 all these values consistantly as hex, as all other standard U-Boot commands
8252 Signed-off-by: Stefan Roese <sr@denx.de>
8254 commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
8255 Author: Stefan Roese <sr@denx.de>
8256 Date: Fri Nov 21 13:06:06 2008 +0100
8258 ppc4xx: ML2 shouldn't include the 4xx EMAC driver
8260 Signed-off-by: Stefan Roese <sr@denx.de>
8262 commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
8263 Author: Yuri Tikhonov <yur@emcraft.com>
8264 Date: Fri Nov 14 16:19:19 2008 +0300
8266 ppc4xx: katmai: Change default config
8268 This patch enables support for EXT2, and increases the
8269 CONFIG_SYS_BOOTMAPSZ size for the default configuration
8270 of the katmai boards to use them as the RAID-reference
8273 EXT2 enabling allows one to boot kernels from the EXT2
8274 formatted Compact Flash cards.
8276 CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
8277 Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
8278 the memory area with DTB file (which is placed at the
8279 end of the bootmap area) will turn out to be overlapped
8280 with the BSS segment of the 256KB kernel, and zeroed
8281 in early_init() of Linux.
8283 Actually, increasing of the bootmap size could be done
8284 via setting of the bootm_size U-Boot variable, but it looks
8285 like the current U-Boot implementation have some bootm_size-
8286 related functionality lost. In many places through the U-Boot
8287 code the CONFIG_SYS_BOOTMAPSZ definition is used directly
8288 (instead of trying to read the corresponding value from the
8289 environment). The same is truth for the boot_jump_linux()
8290 function in lib_ppc/bootm.c, where U-Boot transfers control
8291 to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
8292 value to the booting kernel.
8294 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
8295 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
8296 Signed-off-by: Stefan Roese <sr@denx.de>
8298 commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
8299 Author: Dave Mitchell <dmitch71@gmail.com>
8300 Date: Thu Nov 20 14:09:50 2008 -0600
8302 ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
8304 Expanded OCM TLB to allow access to 64K OCM as well as 256K of
8307 Adjusted internal SRAM initialization to match updated user
8308 manual recommendation.
8310 OCM & ISRAM are now mapped as follows:
8311 physical virtual size
8312 ISRAM 0x4_0000_0000 0xE300_0000 256k
8313 OCM 0x4_0004_0000 0xE304_0000 64k
8315 A single TLB was used for this mapping.
8317 Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
8318 Signed-off-by: Stefan Roese <sr@denx.de>
8320 commit b14ca4b61a681f75f3125676e09d7ce6af66e927
8321 Author: Dave Mitchell <dmitch71@gmail.com>
8322 Date: Thu Nov 20 14:00:49 2008 -0600
8324 ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
8326 Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
8327 L2 cache DCRs from ppc440.h to this new header.
8329 Also converted these DCR defines from lowercase to uppercase and
8330 modified referencing modules to use them.
8332 Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
8333 Signed-off-by: Stefan Roese <sr@denx.de>
8335 commit 711e2b2af820d21d9931d4cf8057d3894600fd54
8336 Author: Steven A. Falco <sfalco@harris.com>
8337 Date: Thu Nov 20 14:37:57 2008 -0500
8339 ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
8341 The definitions of bits in SDR_CFG are incorrect, and not used within
8342 U-Boot. Therefore, they can be removed.
8344 The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
8345 and are unused, so they can be removed too.
8347 A definition for SDR0_DDRCFG is added.
8349 Signed-off-by: Steven A. Falco <sfalco@harris.com>
8350 Signed-off-by: Stefan Roese <sr@denx.de>
8352 commit e23c7c95a96eb0f068efe5c532215a10a1512a95
8353 Author: Dirk Behme <dirk.behme@gmail.com>
8354 Date: Mon Nov 10 20:15:25 2008 +0100
8356 ARM: OMAP: Convert IO macros
8358 Convert IO macros to readx/writex.
8360 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
8362 commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
8363 Author: Ilko Iliev <iliev@ronetix.at>
8364 Date: Sun Nov 9 15:53:14 2008 +0100
8366 lib_arm: do_bootm_linux() - correct a small mistake
8368 This patch corrects a small bug in the "if" condition:
8369 the parameter "flag" is 0 and the "if" condition is always true.
8370 The result is - the boom command doesn't start the kernel.
8371 Affected targets: all arm based.
8373 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
8375 commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
8376 Author: Stelian Pop <stelian@popies.net>
8377 Date: Sun Nov 9 00:14:46 2008 +0100
8379 AT91: Enable PLLB for USB
8381 At least some (old ?) versions of the AT91Bootstrap do not set up the
8382 PLLB correctly to 48 MHz in order to make USB host function correctly.
8384 This patch sets up the PLLB to the same values Linux uses, and makes USB
8385 work ok on the following CPUs:
8390 This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
8391 the relevant AT91CAP9/AT91SAM9 atmel boards.
8393 Signed-off-by: Stelian Pop <stelian@popies.net>
8394 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8396 commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
8397 Author: Stelian Pop <stelian@popies.net>
8398 Date: Fri Nov 7 13:55:14 2008 +0100
8400 AT91: Use AT91_CPU_CLOCK in displays
8402 Introduce AT91_CPU_CLOCK and use it for displaying the CPU
8403 speed in the LCD driver.
8405 Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
8406 corresponding board clocks.
8408 Signed-off-by: Stelian Pop <stelian@popies.net>
8410 commit fed36ac5ae613773b6cd90e61e292c45440e10c8
8411 Author: Heiko Schocher <hs@denx.de>
8412 Date: Thu Nov 20 09:57:47 2008 +0100
8414 powerpc: 83xx: add support for the kmeter1 board
8416 This patch adds support for the kmeter1 board from Keymile,
8417 based on a Freescale MPC8360 CPU.
8419 - serial console on UART 1
8422 - Ethernet RMII Mode over UCC4
8425 Signed-off-by: Heiko Schocher <hs@denx.de>
8426 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8428 commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
8429 Author: Stefan Roese <sr@denx.de>
8430 Date: Thu Nov 20 11:46:20 2008 +0100
8432 ppc4xx: Clear all potentially pending exceptions in MCSR
8434 This is needed on Canyonlands which still has an exception pending
8435 while running relocate_code(). This leads to a failure after trap_init()
8436 is moved to the top of board_init_r().
8438 Signed-off-by: Stefan Roese <sr@denx.de>
8440 commit facdad5f2602e899a01746916beddbf9e856b5ee
8441 Author: Heiko Schocher <hs@denx.de>
8442 Date: Wed Nov 19 10:10:30 2008 +0100
8444 powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
8446 Signed-off-by: Heiko Schocher <hs@denx.de>
8447 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8449 commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
8450 Author: Howard Gregory <Greg.Howard@freescale.com>
8451 Date: Tue Nov 4 14:55:33 2008 +0800
8453 mpc83xx: Improve the performance of DDR memory
8455 modify the CAS timings. my understanding is that these
8456 settings decrease various wait times in the DDR interface.
8457 Because these wait times are in clock cycles, and the DDR
8458 clock on the 8315 RDB runs slower than on some other 83xx
8459 platforms, we can dial down these values without a problem,
8460 thereby decreasing the latency of memory a little.
8462 Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
8463 Signed-off-by: Dave Liu <daveliu@freescale.com>
8464 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8466 commit 8000b086b33a5a81f3f390f37e178db7956dc08b
8467 Author: Kyungmin Park <kyungmin.park@samsung.com>
8468 Date: Fri Oct 24 14:55:33 2008 +0200
8470 ARM: Add Apollon UBI support
8472 To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
8475 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8476 Signed-off-by: Stefan Roese <sr@denx.de>
8478 commit 694a0b3f1c0accd0de94b89555155d69f8022824
8479 Author: Kyungmin Park <kyungmin.park@samsung.com>
8480 Date: Wed Nov 19 11:47:05 2008 +0100
8482 UBI: Add UBI command support
8484 This patch adds these UBI commands:
8486 ubi part [nand|onenand] [part] - Show or set current partition
8487 ubi info [l[ayout]] -Display volume and UBI layout information
8488 ubi create[vol] volume [size] [type] - Create volume name with size
8489 ubi write[vol] address volume size - Write volume from address with size
8490 ubi read[vol] address volume [size] - Read volume to address with size
8491 ubi remove[vol] volume - Remove volume
8493 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8494 Signed-off-by: Stefan Roese <sr@denx.de>
8496 commit 58be3a1056d88c6d05f3e914389282807e69923a
8497 Author: Kyungmin Park <kyungmin.park@samsung.com>
8498 Date: Wed Nov 19 16:38:24 2008 +0100
8500 UBI: Add basic UBI support to U-Boot (Part 8/8)
8502 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8503 It's based on the Linux UBI version and basically has a "OS"
8504 translation wrapper that defines most Linux specific calls
8505 (spin_lock() etc.) into no-ops. Some source code parts have been
8506 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8507 this version with the Linux version and simplifies future UBI
8508 ports/bug-fixes from the Linux version.
8510 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8511 Signed-off-by: Stefan Roese <sr@denx.de>
8513 commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
8514 Author: Kyungmin Park <kyungmin.park@samsung.com>
8515 Date: Wed Nov 19 16:36:36 2008 +0100
8517 UBI: Add basic UBI support to U-Boot (Part 7/8)
8519 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8520 It's based on the Linux UBI version and basically has a "OS"
8521 translation wrapper that defines most Linux specific calls
8522 (spin_lock() etc.) into no-ops. Some source code parts have been
8523 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8524 this version with the Linux version and simplifies future UBI
8525 ports/bug-fixes from the Linux version.
8527 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8528 Signed-off-by: Stefan Roese <sr@denx.de>
8530 commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
8531 Author: Kyungmin Park <kyungmin.park@samsung.com>
8532 Date: Wed Nov 19 16:32:36 2008 +0100
8534 UBI: Add basic UBI support to U-Boot (Part 6/8)
8536 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8537 It's based on the Linux UBI version and basically has a "OS"
8538 translation wrapper that defines most Linux specific calls
8539 (spin_lock() etc.) into no-ops. Some source code parts have been
8540 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8541 this version with the Linux version and simplifies future UBI
8542 ports/bug-fixes from the Linux version.
8544 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8545 Signed-off-by: Stefan Roese <sr@denx.de>
8547 commit c91a719daa331b5856109313371e4ece5ec06d96
8548 Author: Kyungmin Park <kyungmin.park@samsung.com>
8549 Date: Wed Nov 19 16:28:06 2008 +0100
8551 UBI: Add basic UBI support to U-Boot (Part 5/8)
8553 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8554 It's based on the Linux UBI version and basically has a "OS"
8555 translation wrapper that defines most Linux specific calls
8556 (spin_lock() etc.) into no-ops. Some source code parts have been
8557 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8558 this version with the Linux version and simplifies future UBI
8559 ports/bug-fixes from the Linux version.
8561 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8562 Signed-off-by: Stefan Roese <sr@denx.de>
8564 commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
8565 Author: Kyungmin Park <kyungmin.park@samsung.com>
8566 Date: Wed Nov 19 16:27:23 2008 +0100
8568 UBI: Add basic UBI support to U-Boot (Part 4/8)
8570 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8571 It's based on the Linux UBI version and basically has a "OS"
8572 translation wrapper that defines most Linux specific calls
8573 (spin_lock() etc.) into no-ops. Some source code parts have been
8574 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8575 this version with the Linux version and simplifies future UBI
8576 ports/bug-fixes from the Linux version.
8578 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8579 Signed-off-by: Stefan Roese <sr@denx.de>
8581 commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
8582 Author: Kyungmin Park <kyungmin.park@samsung.com>
8583 Date: Wed Nov 19 16:26:54 2008 +0100
8585 UBI: Add basic UBI support to U-Boot (Part 3/8)
8587 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8588 It's based on the Linux UBI version and basically has a "OS"
8589 translation wrapper that defines most Linux specific calls
8590 (spin_lock() etc.) into no-ops. Some source code parts have been
8591 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8592 this version with the Linux version and simplifies future UBI
8593 ports/bug-fixes from the Linux version.
8595 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8596 Signed-off-by: Stefan Roese <sr@denx.de>
8598 commit 961df83361aff9a14f226214224eb8a06e05ba24
8599 Author: Kyungmin Park <kyungmin.park@samsung.com>
8600 Date: Wed Nov 19 16:25:44 2008 +0100
8602 UBI: Add basic UBI support to U-Boot (Part 2/8)
8604 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8605 It's based on the Linux UBI version and basically has a "OS"
8606 translation wrapper that defines most Linux specific calls
8607 (spin_lock() etc.) into no-ops. Some source code parts have been
8608 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8609 this version with the Linux version and simplifies future UBI
8610 ports/bug-fixes from the Linux version.
8612 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8613 Signed-off-by: Stefan Roese <sr@denx.de>
8615 commit f399d4a281713d5ef2d764f05d545fe61e3bd569
8616 Author: Kyungmin Park <kyungmin.park@samsung.com>
8617 Date: Wed Nov 19 16:23:06 2008 +0100
8619 UBI: Add basic UBI support to U-Boot (Part 1/8)
8621 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
8622 It's based on the Linux UBI version and basically has a "OS"
8623 translation wrapper that defines most Linux specific calls
8624 (spin_lock() etc.) into no-ops. Some source code parts have been
8625 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
8626 this version with the Linux version and simplifies future UBI
8627 ports/bug-fixes from the Linux version.
8629 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8630 Signed-off-by: Stefan Roese <sr@denx.de>
8632 commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
8633 Author: Kyungmin Park <kyungmin.park@samsung.com>
8634 Date: Wed Nov 19 16:20:36 2008 +0100
8636 MTD: Add MTD paritioning infrastructure
8638 This MTD part infrastructure will be used by the upcoming
8641 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8642 Signed-off-by: Stefan Roese <sr@denx.de>
8644 commit 9b827cf1720acda2473afa516956eab6f7cca9a1
8645 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
8646 Date: Thu Oct 16 22:54:03 2008 +0530
8648 Align end of bss by 4 bytes
8650 Most of the bss initialization loop increments 4 bytes
8651 at a time. And the loop end is checked for an 'equal'
8652 condition. Make the bss end address aligned by 4, so
8653 that the loop will end as expected.
8655 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
8656 Signed-off-by: Wolfgang Denk <wd@denx.de>
8658 commit 3f510db522d160179dff3ddcce9b18f6241c2c24
8659 Author: Becky Bruce <becky.bruce@freescale.com>
8660 Date: Mon Nov 10 19:45:35 2008 -0600
8662 mpc8641: fix address-cells default in old .dts detection
8664 address-cells defaults to 2, not 1; so in the unlikely
8665 event that it isn't specified, this patch is required
8666 for correct operation.
8668 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8670 commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
8671 Author: Becky Bruce <becky.bruce@freescale.com>
8672 Date: Fri Oct 31 17:14:39 2008 -0500
8674 lib_ppc: Move trap_init to occur earlier
8676 Doing trap_init immediately once we're running from RAM
8677 means we're no longer dependent on the physical location of
8678 the flash on non-BookE platforms. Before trap_init, those
8679 platforms switch to real mode and go to 0xfff00100 on exception.
8680 After the switch, they go to 0x00000100 This makes it easier to
8681 move the flash location.
8683 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8685 commit d52082b12c6e545705a19433a2f4142526536189
8686 Author: Becky Bruce <becky.bruce@freescale.com>
8687 Date: Fri Nov 7 13:46:19 2008 -0600
8689 mpc8641: Try to detect old .dts files
8691 Since we've changed the memory map of the board, be nice and
8692 add some checking to try to catch out-of-date .dts files. We do
8693 this by checking the CCSRBAR location in the .dts and comparing
8694 it to the CCSRBAR location in u-boot. If they don't match, a
8695 warning msg is printed. This isn't foolproof, but it's simple and
8696 will catch most of the cases where an out-of-date .dts is present,
8697 including all of the cases where a new u-boot is used with an old
8698 standard MPC8641 .dts file as supplied with Linux.
8700 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8702 commit 8db0400a27839f91c047dcb83f4a0f09e054a180
8703 Author: Becky Bruce <becky.bruce@freescale.com>
8704 Date: Thu Nov 6 13:04:09 2008 -0600
8706 toplevel Makefile: Add MPC8641HPCN_36BIT target
8708 This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
8710 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8712 commit 3111d32c494e8251b90917447796a7206b757e1e
8713 Author: Becky Bruce <becky.bruce@freescale.com>
8714 Date: Thu Nov 6 17:37:35 2008 -0600
8716 mpc8641: Support 36-bit physical addressing
8718 This patch creates a memory map with all the devices
8719 in 36-bit physical space, in addition to the 32-bit map.
8720 The CCSR relocation is moved (again, sorry) to
8721 allow for the physical address to be 36 bits - this
8722 requires translation to be enabled. With 36-bit physical
8723 addressing enabled, we are no longer running with VA=PA
8724 translations. This means we have to distinguish between
8725 the two in the config file. The existing region name is
8726 used to indicate the virtual address, and a _PHYS variety
8727 is created to represent the physical address.
8729 Large physical addressing is not enabled by default.
8730 Set CONFIG_PHYS_64BIT in the config file to turn this on.
8732 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8734 commit c759a01a0022de9378a3a761f49786f87684c916
8735 Author: Becky Bruce <becky.bruce@freescale.com>
8736 Date: Thu Nov 6 17:36:04 2008 -0600
8738 mpc8641: Change 32-bit memory map
8740 The memory map on the 8641hpcn is modified to look more like
8741 the 85xx boards; this is a step towards a more standardized
8742 layout going forward. As part of this change, we now relocate
8745 The regions for some of the mappings were far larger than they
8746 needed to be. I have reduced the mappings to match the
8747 actual sizes supported by the hardware.
8749 In addition I have removed the comments at the head
8750 of the BAT blocks in the config file, rather than updating
8751 them. These get horribly out of date, and it's a simple
8752 matter to look at the defines to see what they are set to
8753 since everything is right here in the same file.
8755 Documentation has been changed to reflect the new map, as this
8756 change is user visible, and affects the OS which runs post-uboot.
8758 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8760 commit bf9a8c34309ed9276258295db9e9212aabb2531a
8761 Author: Becky Bruce <becky.bruce@freescale.com>
8762 Date: Wed Nov 5 14:55:35 2008 -0600
8764 mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
8766 We define CONFIG_MONITOR_BASE_EARLY to define the initial location
8767 of the bootpage in flash. Use this to create an early mapping
8768 definition for the FLASH, and change the early_bats code to use this.
8770 This change facilitates the relocation of the flash since the early
8771 mappings are no longer tied to the final location of the flash.
8773 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8775 commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
8776 Author: Becky Bruce <becky.bruce@freescale.com>
8777 Date: Wed Nov 5 14:55:34 2008 -0600
8779 mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
8781 Using a mtmsr/blr means that you have to be executing at the
8782 same virtual address once you enable translation. This is
8783 unnecessarily restrictive, and is not really how this is
8784 usually done. Change it to use the more common mtspr SRR0/SRR1
8787 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8789 commit 6bf98b1362f0cb237620355ed3e6762fff82388d
8790 Author: Becky Bruce <becky.bruce@freescale.com>
8791 Date: Wed Nov 5 14:55:33 2008 -0600
8793 mpc8641: make DIAG_ADDR == FLASH_BASE
8795 Currently, that's what it is, but it's hardcoded.
8797 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8799 commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
8800 Author: Becky Bruce <becky.bruce@freescale.com>
8801 Date: Wed Nov 5 14:55:32 2008 -0600
8803 mpc8641: Drop imaginary second flash bank, map 8MB
8805 There's a lot of setup and foo for the second flash
8806 bank. The problem is, this board doesn't actually have one.
8807 Clean this up. Also, the flash is 8M in size. Get rid
8808 of the confusing aliased overmapping, and just map 8M.
8810 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8812 commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
8813 Author: Becky Bruce <becky.bruce@freescale.com>
8814 Date: Wed Nov 5 14:55:31 2008 -0600
8816 mpc8641: only define CONFIG_ENV_SIZE once
8818 It's currently defined twice inside in an if/else block, but
8819 both halves set the same value. Move the define outside
8822 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8824 commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
8825 Author: Becky Bruce <becky.bruce@freescale.com>
8826 Date: Wed Nov 5 14:55:30 2008 -0600
8828 mpc86xx: Move setup_bats into cpu_init_f
8830 In order to later allow for a physical relocation of the
8831 flash, setup_bats, which sets up the final BAT mapping
8832 for the board, needs to happen *after* init_laws().
8833 Otherwise, there will be no window programmed for the flash
8834 at the new physical location at the point when we change
8835 the mmu translation.
8837 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8839 commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
8840 Author: Becky Bruce <becky.bruce@freescale.com>
8841 Date: Wed Nov 5 14:55:29 2008 -0600
8843 mpc8641: Remove extra "0" from BR2 define
8845 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8847 commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
8848 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
8849 Date: Thu Oct 23 09:08:18 2008 -0400
8851 drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
8853 Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
8854 This adds support for PHY-less MAC connections to the UEC.
8856 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
8857 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8859 commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
8860 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8861 Date: Thu Oct 23 16:27:24 2008 +0000
8863 ColdFire: Add mii driver in drivers/net
8865 All CF platforms' mii.c are consolidated into one
8867 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8868 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8870 commit 25a859066b3af1070eb69f12022113c0a91bd813
8871 Author: Ben Warren <biggerbadderben@gmail.com>
8872 Date: Mon Oct 27 23:53:17 2008 -0700
8874 Moved initialization of PPC4xx EMAC to cpu_eth_init()
8876 Removed initialization of the driver from net/eth.c
8878 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8879 Acked-by: Stefan Roese <sr@denx.de>
8881 commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
8882 Author: Ben Warren <biggerbadderben@gmail.com>
8883 Date: Sun Nov 9 21:29:23 2008 -0800
8885 Moved PPC4xx EMAC driver to drivers/net
8887 Also changed path in all linker scripts that reference this driver
8889 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8890 Acked-by: Stefan Roese <sr@denx.de>
8892 commit 96e21f86e8266ed40759e5495ee461265d7f6d28
8893 Author: Ben Warren <biggerbadderben@gmail.com>
8894 Date: Mon Oct 27 23:50:15 2008 -0700
8896 Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
8898 All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
8900 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8901 Acked-by: Stefan Roese <sr@denx.de>
8903 commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
8904 Author: Ben Warren <biggerbadderben@gmail.com>
8905 Date: Thu Oct 23 22:02:49 2008 -0700
8907 Moved initialization of MPC8XX SCC to cpu_eth_init()
8909 Removed initialization of the driver from net/eth.c
8911 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8913 commit a9bec96d6359ac9f90a852962bf3040cad9e0256
8914 Author: Ben Warren <biggerbadderben@gmail.com>
8915 Date: Wed Oct 22 23:47:51 2008 -0700
8917 Moved initialization of MPC8220 FEC to cpu_eth_init()
8919 Removed initialization of the driver from net/eth.c
8921 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8923 commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
8924 Author: Ben Warren <biggerbadderben@gmail.com>
8925 Date: Wed Oct 22 23:32:48 2008 -0700
8927 Moved initialization of QE Ethernet controller to cpu_eth_init()
8929 Removed initialization of the driver from net/eth.c
8931 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8933 commit 3456a148276d5494b53ee40242efb6462d163504
8934 Author: Ben Warren <biggerbadderben@gmail.com>
8935 Date: Wed Oct 22 23:20:29 2008 -0700
8937 Moved initialization of FCC Ethernet controller to cpu_eth_init
8940 Several MPC8xx boards
8941 Several MPC8260/MPC8272 boards
8942 Several MPC85xx boards
8944 Removed initialization of the driver from net/eth.c
8946 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8948 commit 62e15b497f5c6334c059512678c8db7940ae4c61
8949 Author: Ben Warren <biggerbadderben@gmail.com>
8950 Date: Thu Oct 30 22:15:35 2008 -0700
8952 Fix typo in cpu/mpc85xx/cpu.c
8954 CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
8956 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8958 commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
8959 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8960 Date: Sun Oct 19 12:08:50 2008 +0900
8962 net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
8964 This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
8965 as a part of ongoing eth_initialize cleanup work. The function ret value
8966 is also fixed as it should be negative on fail.
8968 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8969 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8971 commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
8972 Author: Ben Warren <biggerbadderben@gmail.com>
8973 Date: Fri Sep 5 01:55:22 2008 -0400
8975 Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
8977 Also, removed the driver initialization from net/eth.c
8979 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8981 commit f2a7806fc23e82d30c8548911369e0c530607354
8982 Author: Clive Stubbings <uboot@xentech.co.uk>
8983 Date: Mon Oct 27 15:05:00 2008 +0000
8985 xilinx_emaclite buffer overrun
8987 Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
8988 PKTSIZE_ALIGN bytes long.
8990 Acked-by: Michal Simek <monstr@monstr.eu>
8992 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8994 commit 0115b1953718a2969f6469d3d5da51ba11e12d42
8995 Author: richardretanubun <richardretanubun@ruggedcom.com>
8996 Date: Fri Sep 26 08:59:12 2008 -0400
8998 NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
9000 The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
9001 This patch makes these function use the devname argument that is passed in to
9002 allow access to the phy registers of other devices in devlist[].
9004 Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
9006 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9008 commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
9009 Author: richardretanubun <richardretanubun@ruggedcom.com>
9010 Date: Mon Oct 6 15:31:43 2008 -0400
9012 Adds two more ethernet interface to 83xx
9014 Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
9015 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
9016 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9018 commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
9019 Author: Stelian Pop <stelian@popies.net>
9020 Date: Fri Nov 7 13:54:31 2008 +0100
9022 AT91: Replace AT91_BASE_EMAC by the board specific values.
9024 AT91_BASE_EMAC is never used outside the board specific files,
9025 so replace its usage by the board specific AT91xxx_BASE_EMAC.
9027 Signed-off-by: Stelian Pop <stelian@popies.net>
9028 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9030 commit c91e17affa175ce06afa89b04752301eb4a61666
9031 Author: Stelian Pop <stelian@popies.net>
9032 Date: Fri Nov 7 12:09:21 2008 +0100
9034 AT91: Replace (undefined) AT91_ID_US* by the board specific values.
9036 AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
9037 Since they are never used outside the board specific files, they can
9038 be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
9041 Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
9043 Signed-off-by: Stelian Pop <stelian@popies.net>
9044 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9046 commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
9047 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9048 Date: Sat Nov 1 10:47:59 2008 +0100
9050 Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
9052 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9054 commit 1079432e04ccf71aa3684181186182cd63512f19
9055 Author: Sergey Lapin <slapin@ossfans.org>
9056 Date: Fri Oct 31 12:28:43 2008 +0100
9058 Custom AFEB9260 board support
9060 This patch provides support for AFEB9260 board, a product of
9061 OpenSource hardware and software. Some commertial projects
9062 are made with this design. A board is basically AT91SAM9260-EK
9063 with some modifications and different peripherals and different
9064 parts used. Main purpose of this project is to gain experience in
9066 More info: http://groups.google.com/group/arm9fpga-evolution-board
9067 (In Russian only, sorry).
9068 Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
9070 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
9072 commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
9073 Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
9074 Date: Tue Oct 21 13:17:16 2008 +0900
9076 Change to use "do_div" macro
9078 Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
9080 commit e352495318d8056a00faa21b633b3e4374bfbf52
9081 Author: Roman Mashak <romez777@gmail.com>
9082 Date: Wed Oct 22 16:00:26 2008 -0400
9084 ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
9086 OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
9087 It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
9089 Signed-off-by: Roman Mashak <romez777@gmail.com>
9091 commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
9092 Author: Roman Mashak <romez777@gmail.com>
9093 Date: Tue Oct 21 03:01:41 2008 -0700
9095 ARM/Versatile port: Removed unused functions
9097 Removal of never used functions.
9099 Signed-off-by: Roman Mashak <romez777@gmail.com>
9101 commit 1266df887781c779deaf6d05eea2ef90a470cb34
9102 Author: Becky Bruce <becky.bruce@freescale.com>
9103 Date: Mon Nov 3 15:44:01 2008 -0600
9105 powerpc: change 86xx SMP boot method
9107 We put the bootpg for the secondary cpus into memory and use
9108 BPTR to get to it. This is a step towards converting to the
9109 ePAPR boot methodology. Also, the code is written to
9110 deal properly with more than 4GB of RAM.
9112 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9114 commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
9115 Author: Becky Bruce <becky.bruce@freescale.com>
9116 Date: Fri Oct 31 17:13:49 2008 -0500
9118 8641HPCN: Config file cleanup
9120 There are several items in the config file that were hardcoded
9121 but that should really be based on other config options, since
9122 the regions are contiguous and depend on being so. This cleans
9123 that up a bit. Also, add BR_PHYS_ADDR() macro to convert
9124 addresses into the proper format for BR registers.
9126 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9128 commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
9129 Author: Becky Bruce <becky.bruce@freescale.com>
9130 Date: Fri Oct 31 17:13:32 2008 -0500
9132 86xx: Make dram_size a phys_size_t
9134 It's currently a long and should be phys_size_t.
9136 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9138 commit 104992fc541302a6bac74448e01e7fdad20abca0
9139 Author: Becky Bruce <becky.bruce@freescale.com>
9140 Date: Sun Nov 2 18:19:32 2008 -0600
9142 powerpc 86xx: Handle CCSR relocation earlier
9144 Currently, the CCSR gets relocated while translation is
9145 enabled, meaning we need 2 BAT translations to get to both the
9146 old location and the new location. Also, the DEFAULT
9147 CCSR location has a dependency on the BAT that maps the
9148 FLASH region. Moving the relocation removes this unnecessary
9149 dependency. This makes it easier and more intutive to
9150 modify the board's memory map.
9152 Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
9155 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9157 commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
9158 Author: Becky Bruce <becky.bruce@freescale.com>
9159 Date: Fri Oct 31 17:14:14 2008 -0500
9161 mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
9163 You can't actually have both, and with some coming changes to
9164 change the memory map for the board and support 36-bit physical,
9165 we need the extra BAT that is being consumed by having both.
9167 I also make non-PCI configs build cleanly, for the sake of sanity.
9169 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9171 commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
9172 Author: Becky Bruce <becky.bruce@freescale.com>
9173 Date: Fri Oct 31 17:14:00 2008 -0500
9175 mpc8641: Stop supporting non-PCI_PNP configs
9177 We don't actually ever do this, remove the code so we
9178 can stop maintaining it.
9180 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9182 commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
9183 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9184 Date: Fri Oct 24 12:59:12 2008 +0000
9186 ColdFire: Fix M5329EVB and M5373EVB nand issue
9188 Fix compilation issue caused by a few mismatches.
9189 Provide proper nand chip select enable/disable in
9190 nand_hwcontrol() rather than in board_nand_init()
9191 just enable once. Remove redundant local nand driver
9192 functions - nand_read_byte(), nand_write_byte() and
9193 nand_dev_ready() to use common nand driver.
9195 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9197 commit 1b2708442224a551a0b865b52710306333888932
9198 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9199 Date: Wed Oct 22 11:55:30 2008 +0000
9201 ColdFire: Fix compilation error
9203 The error was caused by the change for strmhz() in cpu.c.
9204 A few of them were one extra close parenthesis.
9206 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9208 commit 536e7dac16769954915a484e682a2efb28699133
9209 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9210 Date: Wed Oct 22 11:38:21 2008 +0000
9212 ColdFire: Add MCF5301x CPU and M53017EVB support
9214 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9216 commit a21d0c2cc9add8894d971ab791f4032f077db817
9217 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9218 Date: Tue Oct 21 15:37:02 2008 +0000
9220 ColdFire: Add SBF support for M52277EVB
9222 Add serial boot support
9224 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9226 commit b202816c61042c183fe67d097a5893b0f2dafba0
9227 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9228 Date: Tue Oct 21 14:19:26 2008 +0000
9230 ColdFire: Use CFI driver for M5272C3
9232 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9234 commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
9235 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9236 Date: Tue Oct 21 13:47:54 2008 +0000
9238 ColdFire: Relocate FEC's GPIO and mii functions protocols
9240 Place FEC pin assignments in cpu_init.c from platform's
9243 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9245 commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
9246 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9247 Date: Tue Oct 21 12:15:44 2008 +0000
9249 ColdFire: Remove platforms mii.c file
9251 Will use mcfmii.c driver in drivers/net rather than
9252 keep creating new mii.c for each future platform.
9253 Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
9254 M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
9255 M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
9258 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9260 commit 012522fef3b382469125beb46a315ab4dee02fb0
9261 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9262 Date: Tue Oct 21 10:03:07 2008 +0000
9264 ColdFire: Modules header files cleanup
9266 Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
9267 MDHA, SKHA, INTC, and FlexBus structures and
9268 definitions in immap_5xxx.h to more unify modules
9269 header files. Append DSPI support for m547x_8x.
9270 SSI cleanup. Remove USB Host structure from immap_539.h.
9271 Apply changes to use FlexBus structures in mcf52x2's
9272 cpu_init.c and platform configuration files.
9274 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9276 commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
9277 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9278 Date: Tue Oct 21 08:52:36 2008 +0000
9280 ColdFire: Remove linker file
9282 Each different build for M54455EVB and M5235EVB will
9283 create a u-boot.lds linker file. It is redundant to
9286 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9288 commit 0829323073c505556ed5f5073f91adb504584d45
9289 Author: Peter Tyser <ptyser@xes-inc.com>
9290 Date: Fri Oct 31 11:26:44 2008 -0500
9292 ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
9294 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9296 commit a80b21d5127583171d6e9bc7f722947641898012
9297 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9298 Date: Fri Oct 31 12:12:12 2008 +0100
9300 common/Makefile: create others group for non core, environment and command files
9302 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9304 commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
9305 Author: Wolfgang Denk <wd@denx.de>
9306 Date: Fri Oct 31 01:13:37 2008 +0100
9308 TQM8260: use CFI flash driver instead of custom driver.
9310 Signed-off-by: Wolfgang Denk <wd@denx.de>
9312 commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
9313 Author: Andy Fleming <afleming@freescale.com>
9314 Date: Thu Oct 30 17:35:30 2008 -0500
9316 Consolidate MAX/MIN definitions
9318 There were several, now there is one (two if you count the lower-case
9321 Signed-off-by: Andy Fleming <afleming@freescale.com>
9323 commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
9324 Author: Heiko Schocher <hs@denx.de>
9325 Date: Thu Oct 30 09:23:09 2008 +0100
9327 mgsuvd: remove unused defines in config file.
9329 Signed-off-by: Heiko Schocher <hs@denx.de>
9331 commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
9332 Author: Wolfgang Denk <wd@denx.de>
9333 Date: Sun Nov 2 16:14:22 2008 +0100
9335 Coding Style cleanup, update CHANGELOG
9337 Signed-off-by: Wolfgang Denk <wd@denx.de>
9339 commit a47f957ab523019992fdef857af01bd71c58a4da
9340 Author: Alessandro Rubini <rubini-list@gnudd.com>
9341 Date: Fri Oct 31 22:33:21 2008 +0100
9343 NAND: Allow NAND and OneNAND to coexist
9345 This removes in nand.h code that is verbatim duplicated from bbm.h,
9346 including directly bbm.h in nand.h. The previous state of affairs
9347 prevented compiling code for a board hosting both NAND and OneNAND chips.
9349 Reported-by: Scott Wood <scottwood@freescale.com>
9350 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
9351 Signed-off-by: Scott Wood <scottwood@freescale.com>
9353 commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
9354 Author: Scott Wood <scottwood@freescale.com>
9355 Date: Fri Oct 31 13:51:12 2008 -0500
9357 JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
9359 Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
9360 Signed-off-by: Scott Wood <scottwood@freescale.com>
9362 commit c57fc28947e248fb03c49a28b467686299895055
9363 Author: Jason Jin <Jason.Jin@freescale.com>
9364 Date: Fri Oct 31 05:07:04 2008 -0500
9366 NAND: Add NAND support for MPC8536DS board
9368 This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
9369 for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
9370 It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
9372 Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
9373 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9374 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9376 commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
9377 Author: Haiying Wang <Haiying.Wang@freescale.com>
9378 Date: Fri Oct 31 05:06:14 2008 -0500
9380 NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
9382 CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
9384 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9385 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9387 commit 51b572a801be57790fe26adaa530210e7fba59cc
9388 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9389 Date: Fri Oct 24 10:49:48 2008 +0900
9391 sh: rsk7203: Moved rsk7203 board to board/renesas
9393 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9395 commit 58453b00b3ebb26aaa901210023f99504a90bb00
9396 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9397 Date: Fri Oct 24 10:48:31 2008 +0900
9399 sh: MigoR: Moved MigoR board to board/renesas
9401 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9403 commit c1da2a22817ba85b437afa2f4e715e658b219fd1
9404 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9405 Date: Fri Oct 24 10:39:44 2008 +0900
9407 sh: r2dplus: Moved r2dplus board to board/renesas
9409 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9411 commit 78385bf2359d828184d0b3649f7ae6b933420000
9412 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9413 Date: Fri Oct 24 10:36:13 2008 +0900
9415 sh: sh7763rdp: Moved sh7763rdp board to board/renesas
9417 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9419 commit c6525d459c350bfc246ea7826456af77e1e314eb
9420 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9421 Date: Fri Oct 24 10:35:19 2008 +0900
9423 sh: sh7785lcr: Moved sh7785lcr board to board/renesas
9425 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9427 commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
9428 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9429 Date: Fri Oct 24 10:34:21 2008 +0900
9431 sh: r7780mp: Moved r7780mp board to board/renesas
9433 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9435 commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
9436 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9437 Date: Fri Oct 24 10:32:14 2008 +0900
9439 sh: ap325rxa: Moved ap325rxa board to board/renesas
9441 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9443 commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
9444 Author: Wolfgang Denk <wd@xpert.denx.de>
9445 Date: Fri Oct 31 01:12:28 2008 +0100
9447 CFI Driver: Fix "flash not ready" problem
9449 This patch fixes a problem on systems where the NOR flash is attached
9450 to a 64 bit bus. The toggle bit detection in flash_toggle() is based
9451 on the assumption that the same flash address is read twice without
9452 any other interjacent flash accesses. However, on 32 bit systems the
9453 function flash_read64() [as currently implemented] does not perform
9454 an atomic 64 bit read - instead, this is broken down into two 32 bit
9455 read accesses on addresses "addr" and "addr + 4". So instead of
9456 reading a 64 bit value twice from "addr", we see a sequence of 4 32
9457 bit reads from "addr", "addr + 4", "addr", and "addr + 4". The
9458 consequence is that flash_toggle() fails to work.
9460 This patch implements a simple, but somewhat ugly solution, as it
9461 avoids the use of flash_read64() in this critical place (by breaking
9462 it down manually into 32 bit read operations) instead of rewriting
9463 flash_read64() such to perform atomic 64 bit reads as one could
9464 expect. However, such a rewrite would require the use of floating
9465 point load operations, which becomes pretty complex:
9468 set Floating Point Enable bit in MSR;
9469 use "lfd" instruction to perform atomic 64 bit read;
9470 use "stfd" to store value to temporary variable on stack;
9471 load u64 value from temporary variable;
9475 The benefit-cost ratio of such an implementation was considered too
9476 bad to actually attempt this, especially as we can expect that such
9477 an implementation would not only have a bigger memory footprint but
9478 also cause a performance degradation.
9480 Signed-off-by: Wolfgang Denk <wd@denx.de>
9481 Signed-off-by: Stefan Roese <sr@denx.de>
9483 commit cdd4fe63b094d4b767f12ff241d72566b461ee61
9484 Author: Stefan Roese <sr@denx.de>
9485 Date: Fri Oct 31 10:48:08 2008 +0100
9487 ppc4xx: Fix spelling error in MAINTAINERS file
9489 Signed-off-by: Stefan Roese <sr@denx.de>
9491 commit be270798900b75ad9c47c7b79c72f70441196c56
9492 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9493 Date: Tue Oct 28 13:37:00 2008 +0100
9495 ppc4xx: Update PMC440 board support
9497 This patch brings PMC440 board support up to date:
9499 - fix GPIO configuration
9501 - use better values for usbact variable
9502 - fix USB 2.0 phy reset sequence
9503 - shrink BAR2 to save PCI address space
9506 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9507 Signed-off-by: Stefan Roese <sr@denx.de>
9509 commit 75183b1a7fc04206d9779d13f16e03853d7e965d
9510 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9511 Date: Tue Oct 28 13:36:59 2008 +0100
9513 ppc4xx: Fix PMC440 BSP commands
9515 This patch fixes the PMC440 BSP commands painit and selfreset
9517 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9518 Signed-off-by: Stefan Roese <sr@denx.de>
9520 commit 76b565b69f886d5ae748db65e44f464b0e70d41a
9521 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9522 Date: Tue Oct 28 13:36:58 2008 +0100
9524 ppc4xx: Update PMC440 board configuration
9526 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9527 Signed-off-by: Stefan Roese <sr@denx.de>
9529 commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
9530 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9531 Date: Tue Oct 28 13:36:57 2008 +0100
9533 ppc4xx: Fix esd loadpci command
9535 This patch fixes esd's loadpci command when not all
9536 memory on adapter boards is accessable via PCI.
9538 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9539 Signed-off-by: Stefan Roese <sr@denx.de>
9541 commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
9542 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9543 Date: Tue Oct 28 13:36:56 2008 +0100
9545 ppc4xx: Clean up PMC440 header
9547 -Codingstyle cleanup
9548 -Remove unused GPIO define
9550 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9551 Signed-off-by: Stefan Roese <sr@denx.de>
9553 commit 295133258a44f97a57fb2ec339aecfda11f4db95
9554 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9555 Date: Tue Oct 28 13:36:55 2008 +0100
9557 ppc4xx: Handle other board variant in PMC440 FPGA code
9559 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9560 Signed-off-by: Stefan Roese <sr@denx.de>
9562 commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
9563 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
9564 Date: Mon Oct 27 12:35:59 2008 +0100
9566 ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
9568 Xilinx ppc440 and ppc405 have many similarities. This patch merge the
9569 config files of both infrastuctures
9571 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
9572 Signed-off-by: Stefan Roese <sr@denx.de>
9574 commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
9575 Author: Stefan Roese <sr@denx.de>
9576 Date: Sat Oct 25 06:45:31 2008 +0200
9578 ppc4xx: Correctly configure the GPIO pin muxing on Arches
9580 Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
9581 pin multiplexing correctly
9583 Signed-off-by: Stefan Roese <sr@denx.de>
9585 commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
9586 Author: Bartlomiej Sieka <tur@semihalf.com>
9587 Date: Thu Oct 30 23:22:04 2008 +0100
9589 Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
9591 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9593 commit 4bc7deee9095f21e243b724ca3d634251c1d5432
9594 Author: David Gibson <david@gibson.dropbear.id.au>
9595 Date: Wed Oct 29 23:27:45 2008 -0500
9597 libfdt: Fix bug in fdt_subnode_offset_namelen()
9599 There's currently an off-by-one bug in fdt_subnode_offset_namelen()
9600 which causes it to keep searching after it's finished the subnodes of
9601 the given parent, and into the subnodes of siblings of the original
9602 node which come after it in the tree.
9604 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9605 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9607 commit f242a08871839eac081ba5b599af979f3a148a0d
9608 Author: Peter Korsgaard <jacmet@sunsite.dk>
9609 Date: Tue Oct 28 08:26:52 2008 +0100
9611 fdt_resize(): ensure minimum padding
9613 fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
9614 (16 bytes), so make sure that fdt_resize at least adds that much
9615 padding, no matter what the location or size of the fdt is.
9617 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
9618 Acked-by: Andy Fleming <afleming@freescale.com>
9620 commit d685b74c64a38849f1a129b3ab846fbf67dd937e
9621 Author: Dave Liu <daveliu@freescale.com>
9622 Date: Thu Oct 23 21:59:35 2008 +0800
9624 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
9626 The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
9628 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
9630 This is needed in unlock_ram_in_cache() because it is called from C and
9631 will corrupt the small data area anchor that is kept in R2.
9633 lock_ram_in_cache() is modified similarly as good coding practice, but
9634 is not called from C.
9636 Signed-off-by: Nick Spence <nick.spence@freescale.com>
9638 also, the r2 is used as global data pointer.
9640 Signed-off-by: Dave Liu <daveliu@freescale.com>
9642 commit e053ab1903ccae6048ef759025b9f675bba91450
9643 Author: Scott Wood <scottwood@freescale.com>
9644 Date: Tue Oct 28 11:45:04 2008 -0500
9646 mpc83xx pci: Round up memory size in inbound window.
9648 The current calculation will fail to cover all memory if
9649 its size is not a power of two.
9651 Signed-off-by: Scott Wood <scottwood@freescale.com>
9652 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9654 commit 1c671977dc81359628be27ac99c174e76e8069ba
9655 Author: Dave Liu <daveliu@freescale.com>
9656 Date: Thu Oct 23 21:19:13 2008 +0800
9658 86xx: remove the unused definition
9660 Signed-off-by: Dave Liu <daveliu@freescale.com>
9662 commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
9663 Author: Dave Liu <daveliu@freescale.com>
9664 Date: Tue Oct 28 17:47:49 2008 +0800
9666 86xx: remove the redundant r2 global data pointer save
9668 The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
9669 the another global data pointer save, but in fact the
9670 global data pointer will be initialized in the board_init_r,
9671 so remove it such as the 85xx/83xx family.
9673 Signed-off-by: Dave Liu <daveliu@freescale.com>
9674 Acked-by: Kumar Gala <kumar.gala@freescale.com>
9676 commit bd888e9544419665334a6f47f81f34011cea38f3
9677 Author: Dave Liu <daveliu@freescale.com>
9678 Date: Tue Oct 28 17:47:41 2008 +0800
9680 86xx: remove the unused code for 86xx family
9682 I believe these code was copied from 74xx family, but for
9685 Signed-off-by: Dave Liu <daveliu@freescale.com>
9686 Acked-by: Kumar Gala <kumar.gala@freescale.com>
9688 commit 5ba1ef507402bc5e344dc374203792a40f222e8a
9689 Author: Dave Liu <daveliu@freescale.com>
9690 Date: Tue Oct 28 17:46:35 2008 +0800
9692 86xx: remove the second DDR LAW setting for mpc8641hpcn
9694 The DDR1 LAW will precedence the DDR2 LAW, so remove
9697 Signed-off-by: Dave Liu <daveliu@freescale.com>
9698 Acked-by: Becky Bruce <becky.bruce@freescale.com>
9700 commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
9701 Author: Dave Liu <daveliu@freescale.com>
9702 Date: Tue Oct 28 17:46:23 2008 +0800
9704 86xx: remove the unused ddr_enable_ecc in the board file
9706 The DDR controller of 86xx processors have the ECC data init
9707 feature, and the new DDR code is using the feature, we don't
9708 need the way with DMA to init memory again.
9710 Signed-off-by: Dave Liu <daveliu@freescale.com>
9711 Acked-by: Kumar Gala <kumar.gala@freescale.com>
9713 commit dc2adad85bf580d65916c940683f6e9671e8a5dd
9714 Author: Dave Liu <daveliu@freescale.com>
9715 Date: Tue Oct 28 17:46:12 2008 +0800
9717 86xx: Move the clear_tlbs before MMU turn on
9719 We must invalidate TLBs before MMU turn on, but
9720 currently the code is not, if there are some stale
9721 TLB entry valid in the TLBs, it will cause strange
9724 Signed-off-by: Dave Liu <daveliu@freescale.com>
9725 Acked-by: Becky Bruce <becky.bruce@freescale.com>
9727 commit 5cdade07b118d07154cb882650f9778cecc8a87c
9728 Author: Scott Wood <scottwood@freescale.com>
9729 Date: Mon Oct 27 15:57:08 2008 -0500
9731 mpc8313erdb: Document NAND boot.
9733 Previously, the documentation claimed that NAND boot is not supported.
9734 This is no longer true.
9736 Signed-off-by: Scott Wood <scottwood@freescale.com>
9738 commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
9739 Author: Scott Wood <scottwood@freescale.com>
9740 Date: Wed Oct 29 14:20:26 2008 -0500
9742 NAND: Properly create JFFS2 cleanmarkers.
9744 As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
9745 command is currently broken, and among other things causes all blocks
9748 This implements it properly using MTD_OOB_AUTO, along with some
9751 Signed-off-by: Scott Wood <scottwood@freescale.com>
9753 commit f7fe57c09866b44692d18c8cf22828bd137ec58d
9754 Author: Scott Wood <scottwood@freescale.com>
9755 Date: Wed Oct 29 13:42:41 2008 -0500
9757 NAND fsl elbc: Set FMR[ECCM] based on page size.
9759 Hardware expects ECCM 0 for small page and ECCM 1 for large page
9760 when booting from NAND, so use those defaults.
9762 Signed-off-by: Scott Wood <scottwood@freescale.com>
9764 commit c013b74975dab0805ef6d369b013230c4e8a660d
9765 Author: Haiying Wang <Haiying.Wang@freescale.com>
9766 Date: Wed Oct 29 13:32:59 2008 -0400
9768 NAND: Add support for MPC8572DS board
9770 This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
9771 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
9774 It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
9775 make room for the increased code size with NAND enabled.
9777 Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
9778 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9779 Signed-off-by: Scott Wood <scottwood@freescale.com>
9781 commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
9782 Author: Haiying Wang <Haiying.Wang@freescale.com>
9783 Date: Wed Oct 29 11:05:55 2008 -0400
9785 Make Freescale local bus registers available for both 83xx and 85xx.
9787 - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
9788 can be shared by both 83xx and 85xx
9789 - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
9790 files which use lbus83xx_t.
9791 - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
9792 85xx can share them.
9794 Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
9795 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9796 Signed-off-by: Scott Wood <scottwood@freescale.com>
9798 commit 695c130e4bf75b444720ddfd83aca88f41c046cf
9799 Author: Scott Wood <scottwood@freescale.com>
9800 Date: Mon Oct 27 15:38:30 2008 -0500
9802 NAND: Align right column of the shorthelp with other commands.
9804 I accidentally broke this in when making consistent the partial
9805 alignment of the longhelp.
9807 Signed-off-by: Scott Wood <scottwood@freescale.com>
9809 commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
9810 Author: Karl Beldan <karl.beldan@gmail.com>
9811 Date: Mon Sep 15 16:08:03 2008 +0200
9813 NAND: Reset chip on power-up
9815 Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
9816 The first command sent is NAND_CMD_READID.
9817 Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
9818 Tested with an MT29F4G08AAC.
9820 Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
9821 Signed-off-by: Scott Wood <scottwood@freescale.com>
9823 commit c45912d8abc52de796b9059a58faf7c4166eab58
9824 Author: Scott Wood <scottwood@freescale.com>
9825 Date: Fri Oct 24 16:20:43 2008 -0500
9827 NAND: sync with 2.6.27
9829 This brings the core NAND code up to date with the Linux kernel.
9831 Since there were several drivers in Linux as of the last update that are
9832 not in u-boot, I'm not bringing over new drivers that have been added
9833 since in the absence of an interested party.
9835 I did not update OneNAND since it was recently synced by Kyungmin Park,
9836 and I'm not sure exactly what the common ancestor is.
9838 Signed-off-by: Scott Wood <scottwood@freescale.com>
9840 commit b1d0db1805c3395149777e507b6da53410abac4e
9841 Author: Kumar Gala <galak@kernel.crashing.org>
9842 Date: Tue Oct 21 17:25:47 2008 -0500
9844 bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
9846 Added the ability to config out bootm support for Linux, NetBSD, RTEMS
9848 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9850 commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
9851 Author: Kumar Gala <galak@kernel.crashing.org>
9852 Date: Tue Oct 21 17:25:46 2008 -0500
9854 bootm: support subcommands in linux ppc bootm
9856 Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
9858 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9860 commit 49c3a861d11735838f1f1b11999ce433006dc919
9861 Author: Kumar Gala <galak@kernel.crashing.org>
9862 Date: Tue Oct 21 17:25:45 2008 -0500
9864 bootm: Add subcommands
9866 Add the ability to break the steps of the bootm command into several
9867 subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
9869 This allows us to do things like manipulate device trees before
9870 they are passed to a booting kernel or setup memory for a secondary
9871 core in multicore situations.
9873 Not all OS types support all subcommands (currently only start, loados,
9874 ramdisk, fdt, and go are supported).
9876 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9878 commit be08315933537f061bc1ce61f33a29c56458bbad
9879 Author: Kumar Gala <galak@kernel.crashing.org>
9880 Date: Tue Oct 21 17:25:44 2008 -0500
9882 bootm: Move to using a function pointer table for the boot os function
9884 This removes a bit of code and makes it easier for the upcoming sub bootm
9885 command support to call into the proper OS specific handler.
9887 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9888 Signed-off-by: Wolfgang Denk <wd@denx.de>
9890 commit a369f4a492fa2805d87775d27380f0eeaca35aa6
9891 Author: Graeme Russ <graeme.russ@gmail.com>
9892 Date: Mon Sep 29 23:03:14 2008 +1000
9894 i386: Renamed show_boot_progress in assembler code
9896 Renamed show_boot_progress in assembler init phase to
9897 show_boot_progress_asm to avoid link conflicts with C version
9899 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9901 commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
9902 Author: Peter Tyser <ptyser@xes-inc.com>
9903 Date: Mon Oct 27 16:42:00 2008 -0500
9905 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
9907 The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
9908 processors have a 3-bit wide IO_SEL field but have the most
9909 significant bit is wired to 0 so this change should not affect
9912 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9914 commit cd4251624205cb97104f6e32679dc7754934f711
9915 Author: Becky Bruce <becky.bruce@freescale.com>
9916 Date: Mon Oct 27 16:09:42 2008 -0500
9918 powerpc: fix pci window initialization to work with > 4GB DRAM
9920 The existing code has a few errors that need to be fixed in
9921 order to support large RAM sizes. Fix those, and add a
9922 comment to make it clearer.
9924 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9925 Acked-by: Kumar Gala <galak@kernel.crashing.org>
9927 commit 219542a1a66ca017b12860920714a9859b18a5d7
9928 Author: Kumar Gala <galak@kernel.crashing.org>
9929 Date: Mon Oct 27 13:16:20 2008 -0500
9931 pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
9933 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9935 commit 6b59e03e0237a40a2305ea385defdfd92000978b
9936 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9937 Date: Mon Sep 1 16:21:22 2008 +0200
9939 lcd: Let the board code show board-specific info
9941 The information displayed when CONFIG_LCD_INFO is set is inherently
9942 board-specific, so it should be done by the board code. The current code
9943 dealing with this only handles two cases, and is already a horrible mess
9946 Yes, this duplicates some code, but it also allows boards to print more
9947 board-specific information; this used to be very difficult.
9949 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9950 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9952 commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
9953 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9954 Date: Mon Sep 1 16:21:21 2008 +0200
9956 lcd: Set lcd_is_enabled before clearing the screen
9958 This allows the logo/info rendering routines to use the regular
9959 lcd_putc/lcd_puts/lcd_printf calls.
9961 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9962 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9964 commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
9965 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9966 Date: Mon Sep 1 16:21:20 2008 +0200
9968 lcd: Implement lcd_printf()
9970 lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
9971 this by borrowing the lcd_printf() implementation from the cogent board
9972 code (which appears to use its own LCD framework.)
9974 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9975 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9977 commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
9978 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9979 Date: Mon Sep 1 16:21:19 2008 +0200
9981 atmel_lcdfb: Straighten out funky vl_sync logic
9983 If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
9984 otherwise we don't. WTF?
9986 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9987 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9989 commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
9990 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9991 Date: Mon Sep 1 16:21:18 2008 +0200
9993 atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
9995 atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
9996 includes a file that does, asm/arch/gpio.h, but this file doesn't
9997 include <asm/arch/hardware.h> like it's supposed to.
9999 Add the missing include to asm/arch/gpio.h and remove the workaround
10000 from the atmel_lcdfb driver. This makes the driver compile on avr32.
10002 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10003 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10005 commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
10006 Author: Kumar Gala <galak@kernel.crashing.org>
10007 Date: Wed Oct 22 14:38:55 2008 -0500
10009 86xx: Convert all fsl_pci_init users to new APIs
10011 Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
10012 fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
10014 With these changes the board code is a bit smaller and we get dma-ranges
10015 set in the device tree for these boards.
10017 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10018 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10019 Acked-by: Jon Loeliger <jdl@freescale.com>
10021 commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
10022 Author: Kumar Gala <galak@kernel.crashing.org>
10023 Date: Tue Oct 21 08:28:33 2008 -0500
10025 85xx: Convert all fsl_pci_init users to new APIs
10027 Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
10028 MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
10029 and ft_fsl_pci_setup().
10031 With these changes the board code is a bit smaller and we get dma-ranges
10032 set in the device tree for these boards.
10034 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10035 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10037 commit a2aab460727e5f674353a83a81000ef794bffcae
10038 Author: Kumar Gala <galak@kernel.crashing.org>
10039 Date: Thu Oct 23 00:01:06 2008 -0500
10041 pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
10043 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10044 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10046 commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
10047 Author: Kumar Gala <galak@kernel.crashing.org>
10048 Date: Wed Oct 22 14:06:24 2008 -0500
10050 pci/fsl_pci_init: Add a common PCI inbound setup function
10052 Add a common setup function that determines the pci_region(s) based
10053 on how much memory we have in the system.
10055 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10056 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10058 commit 612ea01018a459234d54ed57ec6a5a244ce75678
10059 Author: Kumar Gala <galak@kernel.crashing.org>
10060 Date: Tue Oct 21 10:13:14 2008 -0500
10062 pci/fsl_pci_init: Enable larger address and setting inbound windows properly
10064 * PCI Inbound window was setup incorrectly. The PCI address and system
10065 address were swapped. The PCI address should be setting piwar/piwbear
10066 and the system address should be setting pitar.
10068 * Removed masking of addresses to allow for system address to support
10069 system address & PCI address >32-bits
10071 * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
10073 * Respect the PCI_REGION_PREFETCH for inbound windows
10075 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10076 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10078 commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
10079 Author: Kumar Gala <galak@kernel.crashing.org>
10080 Date: Wed Oct 22 23:33:56 2008 -0500
10082 fdt: Added helper to set PCI dma-ranges property
10084 Added fdt_pci_dma_ranges() that parses the pci_region info from the
10085 struct pci_controller and populates the dma-ranges based on it.
10087 The max # of windws/dma-ranges we support is 3 since on embedded
10088 PowerPC based systems this is the max number of windows.
10090 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10091 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10093 commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
10094 Author: Kumar Gala <galak@kernel.crashing.org>
10095 Date: Thu Oct 23 00:05:47 2008 -0500
10097 fdt: Add fdt_getprop_u32_default helpers
10099 Add helper functions to return find a node and return it's property
10100 or a default value.
10102 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10103 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10104 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
10106 commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
10107 Author: Kumar Gala <galak@kernel.crashing.org>
10108 Date: Tue Oct 21 18:06:15 2008 -0500
10110 86xx: Enable 64-bit PCI resources on all Freescale boards
10112 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10113 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10115 commit 0151cbaccf4504821ecfde0217299bd740086bb6
10116 Author: Kumar Gala <galak@kernel.crashing.org>
10117 Date: Tue Oct 21 11:33:58 2008 -0500
10119 85xx: Enable 64-bit PCI resources on all Freescale boards
10121 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10122 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10124 commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
10125 Author: Kumar Gala <galak@kernel.crashing.org>
10126 Date: Tue Oct 21 08:36:08 2008 -0500
10128 pci: Allow for PCI addresses to be 64-bit
10130 PCI bus is inherently 64-bit. While not all system require access to
10131 the full 64-bit PCI address range some do. This allows those systems
10132 to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
10134 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10135 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
10136 Acked-by: Wolfgang Denk <wd@denx.de>
10138 commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
10139 Author: Dave Liu <daveliu@freescale.com>
10140 Date: Thu Oct 23 21:18:53 2008 +0800
10142 85xx: Fix the incorrect register used for DDR erratum1
10144 The 8572 DDR erratum1:
10145 DDR controller may enter an illegal state when operating
10146 in 32-bit bus mode with 4-beat bursts.
10149 When operating with a 32-bit bus, it is recommended that
10150 DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
10151 This forces the DDR controller to use 4-beat bursts when
10152 communicating to the DRAMs. However, an issue exists that
10153 could lead to data corruption when the DDR controller is
10154 in 32-bit bus mode while using 4-beat bursts.
10157 If the DDR controller is operating in 32-bit bus mode with
10158 4-beat bursts, then the controller may enter into a bad state.
10159 All subsequent reads from memory is corrupted.
10160 Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
10161 Therefore, this erratum does not affect DDR3 mode.
10164 To work around this issue, software must set DEBUG_1[31] in
10165 DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
10166 and CCSRBAR offset + 0x6f00 for DDR_2).
10168 Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
10169 as condition, but it should be DDR_SDRAM_CFG register.
10171 Signed-off-by: Dave Liu <daveliu@freescale.com>
10173 commit d5b693090ed08d24c18491df9d8fc7387b2906f3
10174 Author: Dave Liu <daveliu@freescale.com>
10175 Date: Thu Oct 23 21:17:19 2008 +0800
10177 85xx: remove unused config definition
10179 Signed-off-by: Dave Liu <daveliu@freescale.com>
10181 commit 0f060c3bf82832331a509f2e5d2442539e7aad09
10182 Author: Kumar Gala <galak@kernel.crashing.org>
10183 Date: Thu Oct 23 01:47:38 2008 -0500
10185 85xx: Add basic e500mc core support
10187 Introduce CONFIG_E500MC to deal with the minor differences between
10190 * Certain fields of HID0/1 don't exist anymore on e500mc
10191 * Cache line size is 64-bytes on e500mc
10192 * reset value of PIR is different
10194 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10196 commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
10197 Author: Kumar Gala <galak@kernel.crashing.org>
10198 Date: Thu Oct 23 01:47:37 2008 -0500
10200 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
10202 Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
10203 e500mc's 64-byte cacheline properly when it gets added.
10205 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10207 commit 5deb8022c3749faac30e9ad9694691e2442b5c93
10208 Author: Georg Schardt <schardt@team-ctech.de>
10209 Date: Fri Oct 24 13:51:52 2008 +0200
10211 ppc4xx: New board avnet fx12 minimodul
10213 This patch adds support for the avnet fx12 minimodul.
10214 It needs the "ppc4xx: Generic architecture for xilinx ppc405"
10215 patch from Ricardo.
10217 Signed-off-by: Georg Schardt <schardt@team-ctech.de>
10218 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
10219 Signed-off-by: Stefan Roese <sr@denx.de>
10221 commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
10222 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
10223 Date: Tue Oct 21 18:29:46 2008 +0200
10225 ppc4xx: Generic architecture for xilinx ppc405(v3)
10227 As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
10228 ppc440 boards, this patch presents a common architecture for all the
10229 xilinx ppc405 boards.
10231 Any custom xilinx ppc405 board can be added very easily with no code
10234 This patch also adds a simple generic board, that can be used on almost
10235 any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
10237 This patch is prepared to work with the latest version of EDK (10.1)
10239 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
10240 Signed-off-by: Stefan Roese <sr@denx.de>
10242 commit 485c00a57fab86f72a3769480c66bf1ca22e1459
10243 Author: Stefan Roese <sr@denx.de>
10244 Date: Fri Oct 24 08:56:09 2008 +0200
10246 ppc4xx: Disable DDR2 autocalibration on Kilauea for now
10248 Since the new autocalibration still has some problems on some Kilauea
10249 boards with 200MHz DDR2 frequency we disable the autocalibration and
10250 use the hardcoded values as done before. This seems to work reliably
10251 on all known DDR2 frequencies.
10253 After the autocalibration issue is fixed we will enable it again.
10255 Signed-off-by: Stefan Roese <sr@denx.de>
10257 commit f177f4250c729727b1629fa8d8d6556c999e9b8c
10258 Author: Mike Frysinger <vapier@gentoo.org>
10259 Date: Wed Apr 9 02:02:07 2008 -0400
10261 Blackfin: fix up UART status bit handling
10263 Some Blackfin UARTs are read-to-clear while others are write-to-clear.
10264 This can cause problems when we poll the LSR and then later try and handle
10265 any errors detected.
10267 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10269 commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
10270 Author: Mike Frysinger <vapier@gentoo.org>
10271 Date: Sat Oct 11 20:42:17 2008 -0400
10273 Blackfin: bf561-ezkit: drop redundant code
10275 Common Blackfin code already announces CPU information.
10277 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10279 commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
10280 Author: Mike Frysinger <vapier@gentoo.org>
10281 Date: Sat Oct 11 20:43:10 2008 -0400
10283 Blackfin: bf561-ezkit: drop pointless USB code
10285 The USB/LAN register settings are not actually used/needed in order to
10286 drive things from U-Boot, so drop the code.
10288 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10290 commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
10291 Author: Mike Frysinger <vapier@gentoo.org>
10292 Date: Sat Oct 11 20:47:58 2008 -0400
10294 Blackfin: linker scripts: force start.o and set initcode boundaries
10296 Make sure that the start.o object is always the first object in our linker
10297 script regardless of configuration settings, and add some linker symbols
10298 so the ldr utility can properly locate the initcode when generating a LDR.
10300 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10302 commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
10303 Author: Mike Frysinger <vapier@gentoo.org>
10304 Date: Sat Oct 11 21:19:39 2008 -0400
10306 Blackfin: small cpu init optimization while setting interrupt mask
10308 Use the sti instruction to set the initial interrupt mask rather than
10309 banging on the core IMASK MMR to save both space and time.
10311 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10313 commit 960922291c9594acb575cec7e47d7bed9b58182c
10314 Author: Mike Frysinger <vapier@gentoo.org>
10315 Date: Sat Oct 11 21:18:10 2008 -0400
10317 Blackfin: set initial stack correctly according to Blackfin ABI
10319 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10321 commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
10322 Author: Mike Frysinger <vapier@gentoo.org>
10323 Date: Sun Apr 20 03:11:53 2008 -0400
10325 Blackfin: make baud calculation more accurate
10327 We should use the algorithm in the Linux kernel so that the UART divisor
10328 calculation is more accurate. It also fixes problems on some picky UARTs
10329 that have sampling anomalies.
10331 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10333 commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
10334 Author: Mike Frysinger <vapier@gentoo.org>
10335 Date: Mon Oct 6 04:21:41 2008 -0400
10337 Blackfin: decode hwerrcause/excause when crashing
10339 Having to decode hwerrcause/excause values is a pain, so automate it.
10341 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10343 commit 2de95bb20c488f20298df6881b700a5a757ee780
10344 Author: Mike Frysinger <vapier@gentoo.org>
10345 Date: Mon Oct 6 04:20:54 2008 -0400
10347 Blackfin: fix register dump messages
10349 Make sure we report RETI/IPEND correctly.
10351 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10353 commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
10354 Author: Mike Frysinger <vapier@gentoo.org>
10355 Date: Mon Oct 6 04:19:34 2008 -0400
10357 Blackfin: don't bother displaying reboot msg when crashing
10359 The hang function already tells you to reboot, so no point in showing it
10362 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10364 commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
10365 Author: Mike Frysinger <vapier@gentoo.org>
10366 Date: Sun Jun 1 01:23:48 2008 -0400
10368 Blackfin: enable support for nested interrupts
10370 During cpu init, make sure we initialize the CEC properly so that
10371 interrupts can fire and be handled while U-Boot is running.
10373 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10375 commit 39782727e185860faa4884c2b04e84cb33d1c6cf
10376 Author: Mike Frysinger <vapier@gentoo.org>
10377 Date: Mon Oct 6 03:55:25 2008 -0400
10379 Blackfin: init NAND before relocating env
10381 If booting out of NAND, we need to make sure we initialize it properly
10382 before attempting to relocate the environment.
10384 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10386 commit 0f9a8819416ba40a53de50af148847a0e508f84d
10387 Author: Mike Frysinger <vapier@gentoo.org>
10388 Date: Thu Aug 7 18:40:13 2008 -0400
10390 Blackfin: check cache bits, not cplb bits
10392 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10394 commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
10395 Author: Mike Frysinger <vapier@gentoo.org>
10396 Date: Thu Aug 7 17:52:59 2008 -0400
10398 Blackfin: drop unused cache flush code
10400 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10402 commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
10403 Author: Mike Frysinger <vapier@gentoo.org>
10404 Date: Thu Aug 7 15:21:47 2008 -0400
10406 Blackfin: unify cache handling code
10408 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10410 commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
10411 Author: Mike Frysinger <vapier@gentoo.org>
10412 Date: Mon Oct 6 03:39:07 2008 -0400
10414 Blackfin: only initialize the RTC when actually used
10416 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10418 commit 621e579b812dd1a2e6777f7cbf6e55e736505823
10419 Author: Mike Frysinger <vapier@gentoo.org>
10420 Date: Mon Oct 6 03:44:33 2008 -0400
10422 Blackfin: fix SWRST register definition
10424 The SWRST register is a 16bit, not 32bit, register.
10426 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10428 commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
10429 Author: Mike Frysinger <vapier@gentoo.org>
10430 Date: Thu Aug 7 18:54:57 2008 -0400
10432 Blackfin: build with -fomit-frame-pointer
10434 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10436 commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
10437 Author: Mike Frysinger <vapier@gentoo.org>
10438 Date: Thu Aug 7 17:50:26 2008 -0400
10440 Blackfin: document some of the blackfin directories
10442 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10444 commit e4337968e43698a68ba608369f46d4a4114111ca
10445 Author: Mike Frysinger <vapier@gentoo.org>
10446 Date: Thu Aug 7 15:16:56 2008 -0400
10448 Blackfin: only enable hardware error irq by default
10450 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10452 commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
10453 Author: Mike Frysinger <vapier@gentoo.org>
10454 Date: Thu Aug 7 13:36:43 2008 -0400
10456 Blackfin: punt old unused mem_init.h header
10458 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10460 commit bcc121a01608042066a19ab5bff5bcfb805bf406
10461 Author: Mike Frysinger <vapier@gentoo.org>
10462 Date: Thu Aug 7 13:18:55 2008 -0400
10464 Blackfin: delete unused page_descriptor_table_size define
10466 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10468 commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
10469 Author: Mike Frysinger <vapier@gentoo.org>
10470 Date: Thu Aug 7 13:17:03 2008 -0400
10472 Blackfin: fix typo in boot mode comment and add NAND define
10474 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10476 commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
10477 Author: Ben Maan <moo@cow>
10478 Date: Thu Aug 7 13:14:21 2008 -0400
10480 Blackfin: fix port mux defines for BF54x
10482 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10484 commit 0656ef2ba274910d31364fe022f6c7db0051660d
10485 Author: Mike Frysinger <vapier@gentoo.org>
10486 Date: Thu Aug 7 13:09:50 2008 -0400
10488 Blackfin: update anomaly lists
10490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10492 commit 50ca95402876cf7bac4e2d4f7855f616a038763f
10493 Author: Mike Frysinger <vapier@gentoo.org>
10494 Date: Thu Aug 7 13:08:54 2008 -0400
10496 Blackfin: unify DSPID/DBGSTAT MMR definitions
10498 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10500 commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
10501 Author: Wolfgang Denk <wd@denx.de>
10502 Date: Tue Oct 21 15:53:51 2008 +0200
10504 Fix strmhz(): avoid printing negative fractions
10506 Signed-off-by: Wolfgang Denk <wd@denx.de>
10508 commit 4a7f6b750d8de543fdf8e58acd86745010054571
10509 Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
10510 Date: Fri Oct 17 08:55:51 2008 -0400
10512 mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
10514 This is done to allow other 83XX based platforms which also have UPM
10515 (e.g. 8360) to configure and use their UPM in u-boot.
10517 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
10518 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10520 commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
10521 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10522 Date: Tue Oct 14 22:58:53 2008 +0400
10524 mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
10526 With this patch u-boot can fixup the dr_mode and phy_type properties
10527 for the Dual-Role USB controller.
10529 While at it, also remove #ifdefs around includes, they are not needed.
10531 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10532 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10534 commit b3379f3fd13969934c00097c05754e7a8990fd39
10535 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10536 Date: Wed Oct 8 20:52:54 2008 +0400
10538 mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
10540 Though NAND chip is replaceable on the MPC837XE-MDS boards, the
10541 current settings don't work with the default chip on the board.
10542 Nevertheless Freescale's U-Boot sets the option register correctly,
10543 so I just dumped the register from the working u-boot. My guess is
10544 that the old settings were applicable for some pilot boards, not
10545 found in the production.
10547 This patch also enables FSL ELBC driver so that we could access
10548 the NAND storage in the u-boot.
10550 The NAND support costs about 45KB, so the u-boot no longer fits
10551 into two 128KB NOR flash sectors, thus we also have to adjust
10552 environment location: add another 128KB to the monitor length.
10554 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10556 It is due to hardware design and logic defect, that is the
10557 I/O[0:7] of NAND chip is connected to LAD[7:0], so when
10558 the NAND chip connected to nLCS3, you have to set up the
10559 OR3[BCTLD] = '1' for normal operation, otherwise it will have
10560 bus contention due to the pin 48/25 of U60 is enabled.
10562 Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
10563 asserted upon access to the NAND chip, keep the default state.
10565 Acked-by: Dave Liu <daveliu@freescale.com>
10566 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10568 commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
10569 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10570 Date: Thu Oct 2 19:17:33 2008 +0400
10572 mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
10574 The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
10575 standalone or acting as a PCI agent. User's Guide says:
10577 - When the CPLD recognizes its location on the PIB it automatically
10578 configures RCW to the PCI Host.
10579 - If the CPLD fails to recognize its location then it is automatically
10580 configured as an Agent and the PCI is configured to an external arbiter.
10582 This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
10583 flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
10584 PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
10585 any arbiter bad things will happen (here the board hangs during any config
10588 In this situation we must disable the PCI. And in case of anybody really
10589 want to use an external arbiter, we provide "pci_external_aribter"
10590 environment variable.
10592 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10593 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10595 commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
10596 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10597 Date: Thu Oct 2 18:32:25 2008 +0400
10599 mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
10601 This involves configuring the SerDes and fixing up the flags and
10602 PHY addresses for the TSECs.
10604 For Linux we also fix up the device tree.
10606 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10607 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10609 commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
10610 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10611 Date: Thu Oct 2 18:31:59 2008 +0400
10613 mpc83xx: add TSECs' HRCWH masks for MPC837x processors
10615 We'll use these masks to parse TSEC modes out of HRCWH.
10617 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10618 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10620 commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
10621 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10622 Date: Thu Oct 2 18:31:56 2008 +0400
10624 mpc83xx: serdes: add forgotten shifts for rfcks
10626 The rfcks should be shifted by 28 bits left. We didn't notice the bug
10627 because we were using only 100MHz clocks (for which rfcks == 0).
10629 Though, for SGMII we'll need 125MHz clocks.
10631 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10632 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10634 commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
10635 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10636 Date: Thu Oct 2 18:31:53 2008 +0400
10638 mpc83xx: fix serdes setup for the MPC8378E boards
10640 MPC837xE specs says that SerDes1 has:
10642 — Two lanes running x1 SGMII at 1.25 Gbps;
10643 — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
10647 — Two lanes running x1 PCI Express at 2.5 Gbps;
10648 — One lane running x2 PCI Express at 2.5 Gbps;
10649 — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
10651 The spec also explicitly states that PEX options are not valid for
10654 Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
10655 which is wrong to do.
10657 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10658 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10660 commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
10661 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10662 Date: Wed Sep 10 18:12:37 2008 +0400
10664 mpc83xx: mpc8360emds: rework LBC SDRAM setup
10666 Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
10667 it difficult to use (b/c then the memory is discontinuous and
10668 there is quite big memory hole between the DDR/SDRAM regions).
10670 This patch reworks LBC SDRAM setup so that now we dynamically
10671 place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
10674 With this patch we're able to:
10676 - Boot without external DDR memory;
10677 - Use most "DDR + SDRAM" setups without need to support for
10678 sparse/discontinuous memory model in the software.
10680 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10681 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10683 commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
10684 Author: Wolfgang Denk <wd@xpert.denx.de>
10685 Date: Tue Oct 21 11:23:56 2008 +0200
10687 FDT: don't use private kernel header files
10689 On some systems (for example Fedora Core 4) U-Boot builds with the
10690 following wanrings only:
10693 In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
10695 /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
10697 This patch fixes this problem.
10699 Signed-off-by: Wolfgang Denk <wd@denx.de>
10701 commit f4d14c55504ce40287321bd63ee269e3233ee4ae
10702 Author: Stefan Roese <sr@denx.de>
10703 Date: Mon Oct 13 15:15:31 2008 +0200
10705 ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
10707 Signed-off-by: Stefan Roese <sr@denx.de>
10709 commit 43cbce69d48d052574d71f50724be546d90a46a4
10710 Author: Stefan Roese <sr@denx.de>
10711 Date: Mon Oct 13 10:45:14 2008 +0200
10713 ppc4xx: Correctly setup ranges property in ebc node
10715 Previously only the NOR flash mapping was written into the ranges
10716 property of the ebc node. This patch now writes all enabled chip
10717 select areas into the ranges property.
10719 Signed-off-by: Stefan Roese <sr@denx.de>
10721 commit d7b26d58328f137471ea97de382bfa63f7239931
10722 Author: Dirk Eibach <eibach@gdsys.de>
10723 Date: Wed Oct 8 15:37:50 2008 +0200
10725 ppc4xx: Add GDSys neo 405EP board support
10727 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
10728 Signed-off-by: Stefan Roese <sr@denx.de>
10730 commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
10731 Author: Niklaus Giger <niklaus.giger@netstal.com>
10732 Date: Wed Oct 1 14:46:13 2008 +0200
10734 ppc4xx: Update configs for Netstal boards
10736 I reorganized my config files, putting the common stuff into netstal-common.h
10737 (got the idea by looking a amcc-common.h from Stefan).
10739 Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
10741 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10742 Signed-off-by: Stefan Roese <sr@denx.de>
10744 commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
10745 Author: Adam Graham <agraham@amcc.com>
10746 Date: Wed Oct 8 10:13:19 2008 -0700
10748 ppc4xx: Add routine to retrieve CPU number
10750 Provide a weak defined routine to retrieve the CPU number for
10751 reference boards that have multiple CPU's. Default behavior
10752 is the existing single CPU print output. Reference boards with
10753 multiple CPU's need to provide a board specific routine.
10754 See board/amcc/arches/arches.c for an example.
10756 Signed-off-by: Adam Graham <agraham@amcc.com>
10757 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
10758 Signed-off-by: Stefan Roese <sr@denx.de>
10760 commit 59217bae40e90982ab5400d849c08af683ace036
10761 Author: Adam Graham <agraham@amcc.com>
10762 Date: Wed Oct 8 10:13:14 2008 -0700
10764 ppc4xx: Add static support for 44x IBM SDRAM Controller
10766 This patch add the capability to configure a PPC440 based IBM SDRAM
10767 Controller with static, compiled-in, values. PPC440 memory subsystem
10768 includes a Memory Queue core.
10770 Signed-off-by: Adam Graham <agraham@amcc.com>
10771 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
10772 Signed-off-by: Stefan Roese <sr@denx.de>
10774 commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
10775 Author: Adam Graham <agraham@amcc.com>
10776 Date: Wed Oct 8 10:12:53 2008 -0700
10778 ppc4xx: Add AMCC Arches board support (dual 460GT)
10780 The Arches Evaluation board is based on the AMCC 460GT SoC chip.
10781 This board is a dual processor board with each processor providing
10782 independent resources for Rapid IO, Gigabit Ethernet, and serial
10783 communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
10784 FLASH, UART, EEPROM and temperature sensor, along with a shared debug
10785 port. The two 460GT's will communicate with each other via shared
10786 memory, Gigabit Ethernet and x1 PCI-Express.
10788 Signed-off-by: Adam Graham <agraham@amcc.com>
10789 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
10790 Signed-off-by: Stefan Roese <sr@denx.de>
10792 commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
10793 Author: Wolfgang Denk <wd@xpert.denx.de>
10794 Date: Sun Oct 19 21:54:30 2008 +0200
10796 TQM8260: environment in flash instead EEPROM, baudrate 115k
10798 Several customers have reported problems with the environment in
10799 EEPROM, including corrupted content after board reset. Probably the
10800 code to prevent I2C Enge Conditions is not working sufficiently.
10802 We move the environment to flash now, which allows to have a backup
10803 copy plus gives much faster boot times.
10805 Also, change the default console initialization to 115200 bps as used
10806 on most other boards.
10808 Signed-off-by: Wolfgang Denk <wd@denx.de>
10810 commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
10811 Author: Kumar Gala <galak@kernel.crashing.org>
10812 Date: Sun Oct 19 12:49:19 2008 -0500
10814 85xx: Fix compile warning in mpc8536ds.c
10816 mpc8536ds.c: In function 'is_sata_supported':
10817 mpc8536ds.c:615: warning: unused variable 'devdisr'
10819 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10821 commit 8ed44d91c8122d00368523b0b746691c895d3b3c
10822 Author: Wolfgang Denk <wd@denx.de>
10823 Date: Sun Oct 19 02:35:50 2008 +0200
10825 Cleanup: fix "MHz" spelling
10827 Signed-off-by: Wolfgang Denk <wd@denx.de>
10829 commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
10830 Author: Wolfgang Denk <wd@denx.de>
10831 Date: Sun Oct 19 02:35:49 2008 +0200
10833 Use strmhz() to format clock frequencies
10835 Signed-off-by: Wolfgang Denk <wd@denx.de>
10837 commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
10838 Author: Wolfgang Denk <wd@denx.de>
10839 Date: Sun Oct 19 02:35:48 2008 +0200
10841 strmhz(): Round numbers when printing clock frequencies
10843 Round clock frequencies for printing.
10845 Many boards printed off clock frequencies like 399 MHz instead of the
10846 exact 400 MHz because numberes were not rounded. This is fixed now.
10848 Signed-off-by: Wolfgang Denk <wd@denx.de>
10850 commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
10851 Author: Timur Tabi <timur@freescale.com>
10852 Date: Mon Oct 20 15:16:47 2008 -0500
10854 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
10856 Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
10857 to add a comment that the correct value disagrees with the 8544 reference
10858 manual. The changelog for that commit is also wrong, as it says "bit 28"
10859 when it should be "bit 24".
10861 Signed-off-by: Timur Tabi <timur@freescale.com>
10863 commit 360fe71e82b83e264c964c9447c537e9a1f643c8
10864 Author: Heiko Schocher <hs@denx.de>
10865 Date: Fri Oct 17 18:24:06 2008 +0200
10867 mgcoge: add redundant environment sector
10869 Signed-off-by: Heiko Schocher <hs@denx.de>
10871 commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
10872 Author: Heiko Schocher <hs@denx.de>
10873 Date: Fri Oct 17 18:23:27 2008 +0200
10875 mgsuvd: update size of environment
10877 Signed-off-by: Heiko Schocher <hs@denx.de>
10879 commit 2e26d837f11460c0e6dede7d65424a31e0183d09
10880 Author: Jason Jin <Jason.jin@freescale.com>
10881 Date: Fri Oct 10 11:41:00 2008 +0800
10883 Enabled the Freescale SGMII riser card on 8536DS
10885 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
10887 commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
10888 Author: Liu Yu <yu.liu@freescale.com>
10889 Date: Fri Oct 10 11:40:59 2008 +0800
10891 Enabled the Freescale SGMII riser card on 8572DS
10893 This patch based on Andy's work.
10894 Including command 'pixis_set_sgmii' support.
10896 Signed-off-by: Liu Yu <yu.liu@freescale.com>
10898 commit bff188baf9427c35745356439435acf3864d4c65
10899 Author: Liu Yu <yu.liu@freescale.com>
10900 Date: Fri Oct 10 11:40:58 2008 +0800
10902 Make pixis_set_sgmii more general to support MPC85xx boards.
10904 The pixis sgmii command depend on the FPGA support on the board, some 85xx
10905 boards support SGMII riser card but did not support this command, define
10906 CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
10908 Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
10909 are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
10910 PIXIS_VCFGEN1_MASK in header file for both boards.
10912 Signed-off-by: Liu Yu <yu.liu@freescale.com>
10914 commit 5e981d683d2363204c76773941c2e9c2044c808f
10915 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10916 Date: Wed Oct 8 23:38:02 2008 -0500
10918 Add cpu/8xxx to TAGS_SUBDIRS
10920 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10922 commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
10923 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10924 Date: Thu Oct 9 01:25:55 2008 -0500
10926 fsl_law clear enable before changing.
10928 Debug sessions may have left enabled laws.
10929 Changing lawbar with an unkown enabled tgtid could cause problems.
10931 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10933 commit 86be510f7b5443e7e937f696bfbe037fdc740b15
10934 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10935 Date: Thu Oct 9 00:29:27 2008 -0500
10937 mpc8572 additional end-point mode
10939 mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
10940 Include host_agent == 0 decode for end-point determination.
10942 This is not needed for the ds reference board since pcie3 will be a host
10943 in order to connect to the uli chip. Include it here as a reference for
10944 other mpc8572 boards.
10946 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10948 commit 6856b3d0221a838580e6bb06f61425fd7529ba93
10949 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10950 Date: Wed Oct 8 23:37:59 2008 -0500
10952 85xx if NUM_CPUS>1, print cpu number
10954 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10956 commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
10957 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10958 Date: Wed Oct 8 23:38:01 2008 -0500
10960 pixis do not print long help if not configured
10962 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10964 commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
10965 Author: Andy Fleming <afleming@freescale.com>
10966 Date: Tue Oct 7 08:09:50 2008 -0500
10968 Have u-boot pass stashing parameters into device tree
10970 Some cores don't support ethernet stashing at all, and some
10971 instances have errata. Adds 3 properties to gianfar nodes
10972 which support stashing. For now, just add this support to
10975 Signed-off-by: Andy Fleming <afleming@freescale.com>
10977 commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
10978 Author: Haiying Wang <Haiying.Wang@freescale.com>
10979 Date: Fri Oct 3 12:37:57 2008 -0400
10981 Add DDR options setting on MPC8641HPCN board
10983 * Add board specific parameter table to choose correct cpo, clk_adjust,
10984 write_data_delay based on board ddr frequency and n_ranks.
10986 * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
10988 Signed-off-by: James Yang <James.Yang@freescale.com>
10989 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10991 commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
10992 Author: Haiying Wang <Haiying.Wang@freescale.com>
10993 Date: Fri Oct 3 12:37:41 2008 -0400
10995 Add ddr interleaving suppport for MPC8572DS board
10997 * Add board specific parameter table to choose correct cpo, clk_adjust,
10998 write_data_delay, 2T based on board ddr frequency and n_ranks.
11000 * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
11002 * Set memory controller interleaving mode to bank interleaving, and disable
11003 bank(chip select) interleaving mode by default, because the default on-board
11004 DDR DIMMs are 2x512MB single-rank.
11006 * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
11008 Signed-off-by: James Yang <James.Yang@freescale.com>
11009 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11011 commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
11012 Author: Haiying Wang <Haiying.Wang@freescale.com>
11013 Date: Fri Oct 3 12:37:26 2008 -0400
11015 Add debug information for DDR controller registers
11017 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11019 commit c9ffd839b1ada502c86f88edaf1534426b6688ce
11020 Author: Haiying Wang <Haiying.Wang@freescale.com>
11021 Date: Fri Oct 3 12:37:10 2008 -0400
11023 Check DDR interleaving mode
11025 * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
11027 * Print DDR interleaving mode information
11028 * Add doc/README.fsl-ddr to describe the interleaving setting
11030 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11032 commit dfb49108e4f86c2224e1f30124328b0de66ef72e
11033 Author: Haiying Wang <Haiying.Wang@freescale.com>
11034 Date: Fri Oct 3 12:36:55 2008 -0400
11036 Pass dimm parameters to populate populate controller options
11038 Because some dimm parameters like n_ranks needs to be used with the board
11039 frequency to choose the board parameters like clk_adjust etc. in the
11040 board_specific_paramesters table of the board ddr file, we need to pass
11041 the dimm parameters to the board file.
11043 * move ddr dimm parameters header file from /cpu to /include directory.
11044 * add ddr dimm parameters to populate board specific options.
11045 * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
11047 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11049 commit dbbbb3abeff325855cae76e33d69d5665631443f
11050 Author: Haiying Wang <Haiying.Wang@freescale.com>
11051 Date: Fri Oct 3 12:36:39 2008 -0400
11053 Make DDR interleaving mode work correctly
11056 1. Correctly set intlv_ctl in cs_config.
11057 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
11058 3. Set base_address and total memory for each ddr controller in memory
11059 controller interleaving mode.
11061 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11063 commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
11064 Author: Kumar Gala <galak@kernel.crashing.org>
11065 Date: Mon Sep 22 23:40:42 2008 -0500
11067 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
11069 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11071 commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
11072 Author: Kumar Gala <galak@kernel.crashing.org>
11073 Date: Mon Sep 22 14:11:11 2008 -0500
11075 85xx: Improve flash remapping on MPC8572DS & MPC8536DS
11077 Changing the flash from cacheable to cache-inhibited was taking a significant
11078 amount of time due to the fact that we were iterating over the full 256M of
11079 flash. Instead we can just flush the L1 d-cache and invalidate the i-cache.
11081 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11083 commit 54e091d3b603a3332c619199ca83a07e95960da4
11084 Author: Kumar Gala <galak@kernel.crashing.org>
11085 Date: Mon Sep 22 14:11:10 2008 -0500
11087 85xx: Export invalidate_{i,d}cache and add flush_dcache
11089 Added the ability for C code to invalidate the i/d-cache's and
11090 to flush the d-cache. This allows us to more efficient change mappings
11091 from cache-able to cache-inhibited.
11093 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11095 commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
11096 Author: Heiko Schocher <hs@denx.de>
11097 Date: Fri Oct 17 16:11:52 2008 +0200
11099 mgcoge, mgsuvd: extract more common code
11101 in ft_blob_update () for both boards was an unneccessary
11102 repetition of code, which this patch moves in a common
11103 function for this boards.
11105 Signed-off-by: Heiko Schocher <hs@denx.de>
11107 commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
11108 Author: Heiko Schocher <hs@denx.de>
11109 Date: Fri Oct 17 12:15:55 2008 +0200
11111 mgcoge, mgsuvd: use in_*/out_* accesors
11113 Signed-off-by: Heiko Schocher <hs@denx.de>
11115 commit a21ca95f8b9dca22714952b348e4905ac157b5cd
11116 Author: Heiko Schocher <hs@denx.de>
11117 Date: Fri Oct 17 13:52:51 2008 +0200
11119 mgsuvd: fix compiler warning when using soft_i2c driver
11121 Signed-off-by: Heiko Schocher <hs@denx.de>
11123 commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
11124 Author: Heiko Schocher <hs@denx.de>
11125 Date: Fri Oct 17 12:15:05 2008 +0200
11127 mgsuvd: fix coding style
11129 Signed-off-by: Heiko Schocher <hs@denx.de>
11131 commit 5f4c3137f4f051787707c548133823f1656eb508
11132 Author: Heiko Schocher <hs@denx.de>
11133 Date: Fri Oct 17 12:13:30 2008 +0200
11135 mgcoge: Second Flash on CS5 not on CS1
11137 Signed-off-by: Heiko Schocher <hs@denx.de>
11139 commit 76da19df5b8e186d269f29190696bd31fb6c836b
11140 Author: Kumar Gala <galak@kernel.crashing.org>
11141 Date: Thu Oct 16 21:52:08 2008 -0500
11143 Added arch_lmb_reserve to allow arch specific memory regions protection
11145 Each architecture has different ways of determine what regions of memory
11146 might not be valid to get overwritten when we boot. This provides a
11147 hook to allow them to reserve any regions they care about. Currently
11148 only ppc, m68k and sparc need/use this.
11150 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11152 commit e02d4a9904c8f36395994c0c81469d552b82f5ea
11153 Author: Heiko Schocher <hs@denx.de>
11154 Date: Thu Oct 16 16:32:35 2008 +0200
11156 mgcoge: added CONFIG_FIT to support the new u-boot image format
11158 Signed-off-by: Heiko Schocher <hs@denx.de>
11160 commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
11161 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11162 Date: Thu Oct 16 15:01:15 2008 +0200
11164 rename CFG_ macros to CONFIG_SYS
11166 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11168 commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
11169 Author: Kumar Gala <galak@kernel.crashing.org>
11170 Date: Mon Oct 13 14:12:55 2008 -0500
11172 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
11174 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11176 commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
11177 Author: Kumar Gala <galak@kernel.crashing.org>
11178 Date: Tue Sep 23 10:05:02 2008 -0500
11180 Expose command table search for sub-commands
11182 Sub-command can benefit from using the same table and search functions
11183 that top level commands have. Expose this functionality by refactoring
11184 find_cmd() and introducing find_cmd_tbl() that sub-command processing
11187 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11189 commit f7e51b27508446f8cae3927975817137979ad5e8
11190 Author: Heiko Schocher <hs@denx.de>
11191 Date: Wed Oct 15 09:41:33 2008 +0200
11193 mgsuvd, mgcoge: added BOOTCOUNT feature.
11195 Signed-off-by: Heiko Schocher <hs@denx.de>
11197 commit 8f64da7f83b553889bc08400c97047998382e9d2
11198 Author: Heiko Schocher <hs@denx.de>
11199 Date: Wed Oct 15 09:41:00 2008 +0200
11201 mgcoge, mgsuvd: added support for the IVM EEprom.
11203 The EEprom contains some Manufacturerinformation,
11204 which are read from u-boot at boot time, and saved
11205 in same hush shell variables.
11207 Signed-off-by: Heiko Schocher <hs@denx.de>
11209 commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
11210 Author: Heiko Schocher <hs@denx.de>
11211 Date: Wed Oct 15 09:40:28 2008 +0200
11213 hush: add showvar command for hush shell.
11215 This new command shows the local variables defined in
11220 - print values of all hushshell variables
11222 - print value of hushshell variable 'name'
11224 Also make the set_local_var() and unset_local_var ()
11225 no longer static, so it is possible to define local
11226 hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
11227 is defined, u-boot calls hush_init_var (), where
11228 boardspecific code can define local hush shell
11229 variables at boottime.
11231 Signed-off-by: Heiko Schocher <hs@denx.de>
11233 commit 67b23a322848d828a5e45c0567b72762bfde7abf
11234 Author: Heiko Schocher <hs@denx.de>
11235 Date: Wed Oct 15 09:39:47 2008 +0200
11237 I2C: adding new "i2c bus" Command to the I2C Subsystem.
11239 With this Command it is possible to add new I2C Busses,
11240 which are behind 1 .. n I2C Muxes. Details see README.
11242 Signed-off-by: Heiko Schocher <hs@denx.de>
11244 commit c24853644ddd2dd2e4246b5854a93e6254a14092
11245 Author: Heiko Schocher <hs@denx.de>
11246 Date: Wed Oct 15 09:39:08 2008 +0200
11248 mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
11250 As documented in doc/I2C_Edge_Conditions, adding a
11251 board specific deblocking mechanism via CFG_I2C_INIT_BOARD
11252 for the mgcoge and mgsuvd board.
11254 This code was originally written by Keymile in association
11255 with Anatech and Atmel in 1998. The Code toggels the SCL
11256 until the SCA line goes to HIGH (max. 16 times).
11257 And after this, a start condition is sent.
11259 This is another approach to deblock the I2C Bus. The
11260 soft I2C driver actually sends 9 clocks with SDA High,
11261 and then a stop at the end, to deblock the I2C Bus.
11263 Maybe we should use the approach from Keymile as
11266 Signed-off-by: Heiko Schocher <hs@denx.de>
11268 commit 4ca107effebfbabac1057c39632105dacef95957
11269 Author: Heiko Schocher <hs@denx.de>
11270 Date: Wed Oct 15 09:38:38 2008 +0200
11272 soft_i2c: Add CFG_I2C_INIT_BOARD option
11274 This patch adds the option for a boardspecific
11275 I2C deblocking mechanism for the soft i2c driver.
11277 Signed-off-by: Heiko Schocher <hs@denx.de>
11279 commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
11280 Author: Heiko Schocher <hs@denx.de>
11281 Date: Wed Oct 15 09:38:07 2008 +0200
11283 mgcoge, mgsuvd: add DTT (LM75) support.
11285 Signed-off-by: Heiko Schocher <hs@denx.de>
11287 commit 8e442df438ab677057571e3ac01846bff7719bce
11288 Author: Heiko Schocher <hs@denx.de>
11289 Date: Wed Oct 15 09:37:34 2008 +0200
11291 lm75: Make the LM75 MULTI_BUS compatible.
11293 Signed-off-by: Heiko Schocher <hs@denx.de>
11295 commit 12f1678127c1df2b2878ba93c88948bedc060775
11296 Author: Heiko Schocher <hs@denx.de>
11297 Date: Wed Oct 15 09:37:04 2008 +0200
11299 lm75: fix Codingstyle issues.
11301 Signed-off-by: Heiko Schocher <hs@denx.de>
11303 commit f2202450c75ba6934b356024101500ddcde6e2a6
11304 Author: Heiko Schocher <hs@denx.de>
11305 Date: Wed Oct 15 09:36:33 2008 +0200
11307 mgcoge, mgsuvd: added EEprom support.
11309 Signed-off-by: Heiko Schocher <hs@denx.de>
11311 commit 9661bf9d120f760238b2a073b84f2baf05010057
11312 Author: Heiko Schocher <hs@denx.de>
11313 Date: Wed Oct 15 09:36:03 2008 +0200
11315 mgcoge, mgsuvd: add I2C support.
11317 Signed-off-by: Heiko Schocher <hs@denx.de>
11319 commit 98aed379586a155292efbf3209356836584b601c
11320 Author: Heiko Schocher <hs@denx.de>
11321 Date: Wed Oct 15 09:35:26 2008 +0200
11323 soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
11325 This patch fixes the following warnings, when using
11326 the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
11329 soft_i2c.c: In function 'send_reset':
11330 soft_i2c.c:93: warning: unused variable 'immr'
11331 soft_i2c.c: In function 'send_start':
11332 soft_i2c.c:124: warning: unused variable 'immr'
11333 soft_i2c.c: In function 'send_stop':
11334 soft_i2c.c:146: warning: unused variable 'immr'
11335 soft_i2c.c: In function 'send_ack':
11336 soft_i2c.c:171: warning: unused variable 'immr'
11337 soft_i2c.c: In function 'write_byte':
11338 soft_i2c.c:196: warning: unused variable 'immr'
11339 soft_i2c.c: In function 'read_byte':
11340 soft_i2c.c:244: warning: unused variable 'immr'
11342 Signed-off-by: Heiko Schocher <hs@denx.de>
11344 commit 799b784aa00cb03a352847ab9f9acdde79b72d21
11345 Author: Heiko Schocher <hs@denx.de>
11346 Date: Wed Oct 15 09:34:45 2008 +0200
11348 i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
11350 Signed-off-by: Heiko Schocher <hs@denx.de>
11352 commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
11353 Author: Heiko Schocher <hs@denx.de>
11354 Date: Wed Oct 15 09:34:05 2008 +0200
11356 mgcoge: fix Coding Style issues.
11358 Signed-off-by: Heiko Schocher <hs@denx.de>
11360 commit e43a27c49712203fe8848a17714330623edfb2eb
11361 Author: Heiko Schocher <hs@denx.de>
11362 Date: Wed Oct 15 09:33:30 2008 +0200
11364 I2C: add new command i2c reset.
11366 If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
11367 it is not possible to get out of this, until the
11368 complete Hardware gets a reset. This new commando
11369 calls again i2c_init (and that calls i2c_init_board
11370 if defined), which will deblock the I2C Bus.
11372 Signed-off-by: Heiko Schocher <hs@denx.de>
11373 Signed-off-by: Wolfgang Denk <wd@denx.de>
11375 commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
11376 Author: Heiko Schocher <hs@denx.de>
11377 Date: Wed Oct 15 09:32:25 2008 +0200
11379 mgsuvd, mgcoge: move this 2 boards in one dir.
11381 There are some more extensions, which are for both boards
11382 and some more boards from this manufacturer will follow soon.
11384 Signed-off-by: Heiko Schocher <hs@denx.de>
11385 Signed-off-by: Wolfgang Denk <wd@denx.de>
11387 commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
11388 Author: Dirk Eibach <eibach@gdsys.de>
11389 Date: Wed Oct 8 13:44:27 2008 +0200
11391 hwmon: Add LM63 support
11393 This patch adds support for the National LM63 temperature
11394 sensor with integrated fan control. It's used on the GDSys
11395 Neo board (405EP) which will be submitted later.
11397 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
11398 Acked-by: Stefan Roese <sr@denx.de>
11400 commit 7ba890bf2f2b92831420243c058951aa831119fd
11401 Author: Kyungmin Park <kmpark@infradead.org>
11402 Date: Wed Oct 8 11:01:17 2008 +0900
11404 Add Red Black Tree support
11406 Now it's used at UBI module. Of course other modules can use it.
11407 If you want to use it, please define CONFIG_RBTREE
11409 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
11411 commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
11412 Author: richardretanubun <richardretanubun@ruggedcom.com>
11413 Date: Mon Oct 6 16:10:53 2008 -0400
11415 CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
11417 Added support for CONFIG_EFI_PARTITION to ext2 commands.
11418 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
11420 commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
11421 Author: richardretanubun <richardretanubun@ruggedcom.com>
11422 Date: Fri Sep 26 11:13:22 2008 -0400
11424 Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
11426 The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
11427 of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
11429 Based on linux/fs/partitions/efi.[ch]
11431 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
11433 commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
11434 Author: Bartlomiej Sieka <tur@semihalf.com>
11435 Date: Wed Oct 1 15:26:32 2008 +0200
11437 FIT: output image load address for type 'firmware', fix message while there
11439 Now that the auto-update feature uses the 'firmware' type for updates, it is
11440 useful to inspect the load address of such images.
11442 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11444 commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
11445 Author: Bartlomiej Sieka <tur@semihalf.com>
11446 Date: Wed Oct 1 15:26:31 2008 +0200
11448 Automatic software update from TFTP server
11450 The auto-update feature allows to automatically download software updates
11451 from a TFTP server and store them in Flash memory during boot. Updates are
11452 contained in a FIT file and protected with SHA-1 checksum.
11454 More detailed description can be found in doc/README.update.
11456 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
11457 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11459 commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
11460 Author: Bartlomiej Sieka <tur@semihalf.com>
11461 Date: Wed Oct 1 15:26:27 2008 +0200
11463 flash: factor out adjusting of Flash address to the end of sector
11465 The upcoming automatic update feature needs the ability to adjust an
11466 address within Flash to the end of its respective sector. Factor out
11467 this functionality to a new function flash_sect_roundb().
11469 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
11470 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11471 Signed-off-by: Stefan Roese <sr@denx.de>
11473 commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
11474 Author: Bartlomiej Sieka <tur@semihalf.com>
11475 Date: Wed Oct 1 15:26:29 2008 +0200
11477 net: Make TFTP server timeout configurable
11479 There are two aspects of a TFTP transfer involving timeouts:
11480 1. timeout waiting for initial server reply after sending RRQ
11481 2. timeouts while transferring actual data from the server
11483 Since the upcoming auto-update feature attempts a TFTP download during each
11484 boot, it is undesirable to have a long delay when the TFTP server is not
11485 available. Thus, this commit makes the server timeout (1.) configurable by two
11488 TftpRRQTimeoutMSecs
11489 TftpRRQTimeoutCountMax
11491 TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
11492 server, TftpRRQTimeoutCountMax overrides default number of connection retries.
11493 The total delay when trying to download a file from a non-existing TFTP server
11494 is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
11496 Timeouts during file transfers (2.) are unaffected.
11498 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
11499 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11500 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11502 commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
11503 Author: Bartlomiej Sieka <tur@semihalf.com>
11504 Date: Wed Oct 1 15:26:28 2008 +0200
11506 net: express the first argument to NetSetTimeout() in milliseconds
11508 Enforce millisecond semantics of the first argument to NetSetTimeout() --
11509 the change is transparent for well-behaving boards (CFG_HZ == 1000 and
11510 get_timer() countiing in milliseconds).
11512 Rationale for this patch is to enable millisecond granularity for
11513 network-related timeouts, which is needed for the upcoming automatic
11514 software update feature.
11516 Summary of changes:
11517 - do not scale the first argument to NetSetTimeout() by CFG_HZ
11518 - change timeout values used in the networking code to milliseconds
11520 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
11521 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11522 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11524 commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
11525 Author: richardretanubun <richardretanubun@ruggedcom.com>
11526 Date: Mon Sep 29 18:28:23 2008 -0400
11528 Adds two more ethernet interface to 83xx
11530 Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
11531 Six eth interface is chosen because the platform I am using combines
11532 UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
11534 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
11535 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11537 commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
11538 Author: Haiying Wang <Haiying.Wang@freescale.com>
11539 Date: Wed Sep 24 11:42:12 2008 -0500
11541 Change UEC PHY interface to RGMII on MPC8568MDS
11543 Change UEC phy interface from GMII to RGMII on MPC8568MDS board
11545 Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
11546 but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
11548 Now both UEC1 and UEC2 can work properly under u-boot.
11550 It is also in consistent with the kernel setting for 8568 UEC phy interface.
11552 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11553 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11555 commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
11556 Author: Wolfgang Denk <wd@denx.de>
11557 Date: Sat Oct 18 21:30:31 2008 +0200
11559 Prepare v2008.10 release: update CHANGELOG & Makefile
11561 Signed-off-by: Wolfgang Denk <wd@denx.de>
11563 commit f7a35a60cf45491871a5c28e9ad24db005487857
11564 Author: Heiko Schocher <hs@denx.de>
11565 Date: Fri Oct 17 18:24:06 2008 +0200
11567 mgcoge: add redundant environment sector
11569 Signed-off-by: Heiko Schocher <hs@denx.de>
11570 Signed-off-by: Wolfgang Denk <wd@denx.de>
11572 commit c2537ee85954af9d036b18b644f3e18d837bf4a5
11573 Author: Heiko Schocher <hs@denx.de>
11574 Date: Fri Oct 17 18:23:27 2008 +0200
11576 mgsuvd: update size of environment
11578 Signed-off-by: Heiko Schocher <hs@denx.de>
11580 commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
11581 Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
11582 Date: Thu Oct 16 13:38:00 2008 -0500
11584 83xx NAND boot: wait for LTESR[CC]
11586 At least some revisions of the 8313, and possibly other chips, do not
11587 wait for all pages of the initial 4K NAND region to be loaded before
11588 beginning execution; thus, we wait for it before branching out of the
11591 This fixes warm reset problems when booting from NAND on 8313erdb.
11593 Signed-off-by: Scott Wood <scottwood@freescale.com>
11594 Acked-by: Kim Phillips <kim.phillips@freescale.com>
11596 commit bf29e0ea0af03d593c64614136acc723a7a022a2
11597 Author: Yuri Tikhonov <yur@emcraft.com>
11598 Date: Fri Oct 17 12:54:18 2008 +0200
11600 ppc4xx: PPC44x MQ initialization
11602 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
11603 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
11604 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
11606 Previously the appropriate initialization had been made in Linux, by the
11607 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
11608 registers after normal operation has begun is not supported and could
11609 have unpredictable results.
11611 Comment from Stefan: This patch doesn't change the resulting value of the
11612 MQ registers. It explicitly sets/clears all bits to the desired state which
11613 better documents the resulting register value instead of relying on pre-set
11616 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
11617 Signed-off-by: Stefan Roese <sr@denx.de>
11619 commit ec081c2c190148b374e86a795fb6b1c49caeb549
11620 Author: Stefan Roese <sr@denx.de>
11621 Date: Fri Oct 17 12:51:46 2008 +0200
11623 ppc4xx: PPC44x MQ initialization
11625 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
11626 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
11627 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
11629 Previously the appropriate initialization had been made in Linux, by the
11630 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
11631 registers after normal operation has begun is not supported and could
11632 have unpredictable results.
11634 Comment from Stefan: This patch doesn't change the resulting value of the
11635 MQ registers. It explicitly sets/clears all bits to the desired state which
11636 better documents the resulting register value instead of relying on pre-set
11639 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
11640 Signed-off-by: Stefan Roese <sr@denx.de>
11642 commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
11643 Author: Kumar Gala <galak@kernel.crashing.org>
11644 Date: Thu Oct 16 21:58:50 2008 -0500
11646 85xx: Using proper I2C source clock divider for MPC8544
11648 The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
11649 bit 26, instead it should be bit 28. This caused in incorrect
11650 interpretation of the i2c_clk which is the same as the SEC clk on
11651 MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
11654 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11656 commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
11657 Author: Kumar Gala <galak@kernel.crashing.org>
11658 Date: Thu Oct 16 21:58:49 2008 -0500
11660 Revert "85xx: Using proper I2C source clock divider for MPC8544"
11662 This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
11664 The fix introduced by this patch is not correct. The problem is
11665 that the documentation is not correct for the MPC8544 with regards
11666 to which bit in PORDEVSR2 is for the SEC_CFG.
11668 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11670 commit 2179c4766bffeece98e5e92040629a96c97e230c
11671 Author: Kumar Gala <galak@kernel.crashing.org>
11672 Date: Wed Oct 15 10:19:41 2008 -0500
11674 85xx: Fix compile warning
11676 mpc8536ds.c: In function 'is_sata_supported':
11677 mpc8536ds.c:614: warning: unused variable 'devdisr'
11679 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11681 commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
11682 Author: Jason Jin <Jason.jin@freescale.com>
11683 Date: Wed Oct 15 10:40:24 2008 +0800
11685 Fix the function conflict in x86emu when DEBUG is on
11687 The function parse_line() in common/main.c was exposed globally by commit
11688 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
11689 name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
11690 This patch fix this by renaming the function in the debug.c file.
11692 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
11694 commit b4dbacf69a669a17487054552fc2761149dd6767
11695 Author: Wolfgang Denk <wd@denx.de>
11696 Date: Wed Oct 15 15:50:45 2008 +0200
11698 Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
11700 Signed-off-by: Wolfgang Denk <wd@denx.de>
11702 commit 374b9038293d01d8744a46af9b7854a6fd99b228
11703 Author: Heiko Schocher <hs@denx.de>
11704 Date: Wed Oct 15 09:51:19 2008 +0200
11706 Fix compiler warning in lib_ppc/board.c
11708 Fix compiler warning introduced by commit 0f8cbc18
11710 Signed-off-by: Heiko Schocher <hs@denx.de>
11711 Signed-off-by: Wolfgang Denk <wd@denx.de>
11713 commit 9724555755a6f1066636481b41f7094e0ce93a69
11714 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
11715 Date: Thu Oct 9 10:29:14 2008 +0530
11717 mpc83xx: wait till UPM completes the write to array
11719 Reference manual states that MxMR[MAD] increment is the indication
11720 of write to UPM array is complete. Honour that. Also, make the dummy
11723 also fix the comment.
11725 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
11726 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11728 commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
11729 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
11730 Date: Wed Oct 8 18:12:20 2008 -0500
11732 Remove unwanted ';' at end of define.
11734 Currently this is not creating any problem. But it will result
11735 in compilation error when used as below.
11737 printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
11739 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
11741 continuation of the theme based on git grep "^#define CFG_.*;$" include/
11743 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11745 commit b2934a56650e9a6c54432f9ce6dc36757967385e
11746 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
11747 Date: Mon Oct 6 10:53:59 2008 -0400
11749 ARM DaVinci: Add maintainer information for SFFSDR board.
11751 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
11753 commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
11754 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11755 Date: Sat Oct 4 19:26:16 2008 +0200
11757 api: fix type mismatch
11759 This patch fixes a type mismatch and thus removes a compiler
11760 warning when compiling with CONFIG_API on powerpc.
11762 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11764 commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
11765 Author: Peter Tyser <ptyser@xes-inc.com>
11766 Date: Wed Oct 1 12:25:04 2008 -0500
11768 cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
11770 Original code displayed:
11772 i2c i2c speed [speed] - show or set I2C bus speed
11773 i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
11776 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11778 commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
11779 Author: Wolfgang Denk <wd@denx.de>
11780 Date: Tue Oct 14 22:13:41 2008 +0200
11784 Signed-off-by: Wolfgang Denk <wd@denx.de>
11786 commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
11787 Author: Jason Jin <Jason.jin@freescale.com>
11788 Date: Fri Oct 10 11:41:01 2008 +0800
11790 Do not init SATA when disabled on 8536DS.
11792 SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
11793 driver still try to access the SATA registers, the cpu will hangup.
11794 This patch try to fix this by reading the serdes status before the SATA
11797 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
11798 Acked-by: Andy Fleming <afleming@freescale.com>
11800 commit 9dbc366744960013965fce8851035b6141f3b3ae
11801 Author: Remy Bohmer <linux@bohmer.net>
11802 Date: Fri Oct 10 10:23:22 2008 +0200
11804 The PIPE_INTERRUPT flag is used wrong
11806 At a lot of places in the code the PIPE_INTERRUPT flags and friends
11807 are used wrong. The wrong bits are compared to this flag resulting
11808 in wrong conditions. Also there are macros that should be used for
11810 This patch tries to fix them all, however, I was not able to test the
11811 changes, because I do not have any of these boards.
11815 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11816 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11818 commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
11819 Author: Remy Bohmer <linux@bohmer.net>
11820 Date: Fri Oct 10 10:23:21 2008 +0200
11822 fix USB initialisation procedure
11824 The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
11825 At some places directly 8,16,32,64 was used instead of the encoded
11826 value. Made a enum for the options to make this more clear and to help
11827 preventing similar errors in the future.
11829 After fixing this bug it became clear that another bug existed where
11830 the 'pipe' is and-ed with PIPE_* flags, where it should have been
11831 'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
11833 Also removed the triple 'get_device_descriptor' sequence, it has no use,
11834 and Windows nor Linux behaves that way.
11835 There is also a poll going on with a timeout when usb_control_msg() fails.
11836 However, the poll is useless, because the flag will never be set on a error,
11837 because there is no code that runs in a parallel that can set this flag.
11838 Changed this to something more logical.
11840 Tested on AT91SAM9261ek and compared the flow on the USB bus to what
11841 Linux is doing. There is no difference anymore in the early initialisation
11844 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11845 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11847 commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
11848 Author: Nikita V. Youshchenko <yoush@cs.msu.su>
11849 Date: Fri Oct 3 00:03:55 2008 +0400
11851 fsl_diu: fix alignment error that caused malloc corruption
11853 When aligning malloc()ed screen_base, invalid offset was added.
11854 This not only caused misaligned result (which did not cause hardware
11855 misbehaviour), but - worse - caused screen_base + smem_len to
11856 be out of malloc()ed space, which in turn caused breakage of
11857 futher malloc()/free() operation.
11859 This patch fixes screen_base alignment.
11861 Also this patch makes memset() that cleans framebuffer to be executed
11862 on first initialization of diu, not only on re-initialization. It looks
11863 correct to clean the framebuffer instead of displaying random garbage;
11864 I believe that was disabled only because that memset caused breakage
11865 of malloc/free described above - which no longer happens with the fix
11868 Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
11870 commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
11871 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11872 Date: Wed Sep 24 10:29:37 2008 +0200
11874 api: Fix building with CONFIG_API
11876 This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
11878 USB_MAX_STOR_DEV is defined in include/usb.h, but
11879 needed in api/api_storage.c.
11881 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11883 commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
11884 Author: Peter Tyser <ptyser@xes-inc.com>
11885 Date: Tue Sep 23 12:39:40 2008 -0500
11887 Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
11889 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11891 commit 81e612014c40c922ec35488d17c504d4e9286f06
11892 Author: Peter Tyser <ptyser@xes-inc.com>
11893 Date: Tue Sep 23 12:38:42 2008 -0500
11895 Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
11897 The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
11898 CFG_EEPROM_PAGE_WRITE_BITS in various temperature
11899 sensor drivers are not necessary
11901 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11903 commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
11904 Author: Mike Frysinger <vapier@gentoo.org>
11905 Date: Tue Oct 14 07:04:38 2008 -0400
11907 cmd_spi: remove broken signed casting for display
11909 Since we're working with unsigned data, you can't apply a signed pointer
11910 cast and then attempt to print the result. Otherwise you get wrong output
11911 when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
11913 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11915 commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
11916 Author: Mike Frysinger <vapier@gentoo.org>
11917 Date: Tue Oct 14 07:05:24 2008 -0400
11919 strings cmd: drop old CONFIG_CFG_STRINGS define
11921 We don't need CONFIG_CFG_STRINGS anymore now that we have the define
11922 CONFIG_CMD_STRINGS and Makefile control.
11924 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11926 commit fecb5ade3b37f62981f2b05b621005850173aaa9
11927 Author: Jason Jin <Jason.jin@freescale.com>
11928 Date: Fri Sep 19 17:32:49 2008 +0800
11930 Fix the NAND size overflow issue.
11932 When the total size of all NAND devices exceeds 4 GiB, the size will
11933 overflow. This patch tries to fix this.
11935 Note that we still have a problem when a single NAND device is bigger
11936 than 4 GiB: then the overflow would actually happen earlier, i. e.
11937 when storing the size in nand_info[].size, as nand_info[].size is an
11940 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
11941 Signed-off-by: Wolfgang Denk <wd@denx.de>
11943 commit 30f574717277238b9014b8136c90eea77196490f
11944 Author: Louis Su <louis@asix.com.tw>
11945 Date: Wed Jul 9 11:01:37 2008 +0800
11947 AX88180: new gigabit network driver
11949 Signed-off-by: Louis Su <louis@asix.com.tw>
11950 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11952 commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
11953 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
11954 Date: Tue Aug 19 16:07:03 2008 +0200
11956 enable 10/100M at VSC8601 at tsec driver
11958 Currently VSC8601 doesn't link with 10/100M partners if the
11959 EEPROM/Strapping is not set up.
11960 Setting the auto-neg register fixes this.
11962 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
11963 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11965 commit 702c85b0e876d587c11acdbb55738ee52acd54f4
11966 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11967 Date: Tue Sep 30 15:02:53 2008 +0900
11969 net: ne2000: Divided a function of NE2000 driver
11971 get_prom function was used __attriute__ , but it is not enable.
11972 ax88796.o does not do link besides ne2000.o. When ld is carried
11973 out, get_prom function of ax88796.c is ignored.
11974 This problem is a thing by specifications of ld.
11975 I checked and test this patch on SuperH and MIPS.
11977 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11978 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11980 commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
11981 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11982 Date: Tue Oct 14 11:10:59 2008 +0900
11984 sh: rsk7203: Add smc911x driver support to board config file
11986 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11987 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11989 commit cae6f909baf86357b3c0bd01acfc414348c4d175
11990 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11991 Date: Thu Oct 9 13:54:33 2008 +0900
11993 sh: Fix cannot execute a stand-alone application
11995 Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
11997 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11998 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12000 commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
12001 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12002 Date: Wed Oct 8 23:38:00 2008 -0500
12004 fsl_pci_init do not scan bus when configured as an end-point
12006 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12007 Acked-by: Andy Fleming <afleming@freescale.com>
12009 commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
12010 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12011 Date: Tue Sep 16 17:07:53 2008 -0400
12013 ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
12015 This is no longer necessary now that the GD_FLG_RELOC flag is set for
12018 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12020 commit d977a57356657ba241256231efca32828a5822f9
12021 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
12022 Date: Sat Sep 13 10:04:32 2008 +0200
12024 Fix lzma uncompress call (image_start wrongly used instead image_len)
12026 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
12028 commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
12029 Author: Nick Spence <nick.spence@freescale.com>
12030 Date: Thu Aug 28 14:09:15 2008 -0700
12032 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
12034 This is needed in unlock_ram_in_cache() because it is called from C and
12035 will corrupt the small data area anchor that is kept in R2.
12037 lock_ram_in_cache() is modified similarly as good coding practice, but
12038 is not called from C.
12040 Signed-off-by: Nick Spence <nick.spence@freescale.com>
12042 commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
12043 Author: Kumar Gala <galak@kernel.crashing.org>
12044 Date: Tue Aug 19 15:05:34 2008 -0500
12046 86xx: remove redudant code with lib_ppc/interrupts.c
12048 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
12049 Not know how that happened, but there is no good reason for it.
12051 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
12054 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12056 commit 0d01f66d235118515b5086b88f82498bc0695d6a
12057 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12058 Date: Thu Oct 9 01:26:36 2008 -0500
12060 CFI: cfi_flash write fix for AMD legacy
12062 The flash_unlock_seq requires a sector for AMD_LEGACY.
12063 Fix a retcode check typeo.
12065 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12066 Signed-off-by: Stefan Roese <sr@denx.de>
12068 commit 542b385a620a1783454a00424930e51895f45073
12069 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12070 Date: Tue Oct 7 13:13:10 2008 +0200
12072 ppc4xx: Fix USB 2.0 phy reset sequence
12074 This patch fixes USB 2.0 communication issues on some DU440 boards.
12076 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12077 Signed-off-by: Stefan Roese <sr@denx.de>
12079 commit df8c1ce11114c2260dedb5547281945f7db8fa5c
12080 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12081 Date: Tue Oct 7 13:13:09 2008 +0200
12083 ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
12085 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12086 Signed-off-by: Stefan Roese <sr@denx.de>
12088 commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
12089 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12090 Date: Tue Oct 7 13:13:08 2008 +0200
12092 ppc4xx: Fix DU440 GPIO configuration
12094 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12095 Signed-off-by: Stefan Roese <sr@denx.de>
12097 commit 35dd025c70fcc4389317db2f2a9d14795172137d
12098 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12099 Date: Tue Oct 7 13:13:07 2008 +0200
12101 ppc4xx: Update DU440 config
12103 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12104 Signed-off-by: Stefan Roese <sr@denx.de>
12106 commit f3bf9273939ffe1a60a32a2eef909097f15df56b
12107 Author: Kumar Gala <galak@kernel.crashing.org>
12108 Date: Wed Oct 8 15:36:39 2008 -0500
12110 MPC8572DS: Fix compile warnings
12112 Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
12115 cmd_i2c.c:112: warning: missing braces around initializer
12116 cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
12118 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12120 commit dffd2446fb041f38ef034b0fcf41e51e5e489159
12121 Author: Wolfgang Grandegger <wg@grandegger.com>
12122 Date: Tue Sep 30 10:55:57 2008 +0200
12124 85xx: Using proper I2C source clock divider for MPC8544
12126 Measurements with our MPC8544 board showed that the I2C bus frequency
12127 is wrong by a factor of 1.5. Obviously, the interpretation of the
12128 MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
12129 correct. There seems to be an error in the 8544 RM.
12131 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12133 commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
12134 Author: Rafal Czubak <rcz@semihalf.com>
12135 Date: Wed Oct 8 13:41:30 2008 +0200
12137 FSL: Fix get_cpu_board_revision() return value.
12139 get_cpu_board_revision() returned board revision based on information stored
12140 in global static struct eeprom. It should instead use one from local struct
12141 board_eeprom, to which the data is actually read from EEPROM. The bug led to
12142 system hang after printing L1 cache information on U-Boot startup. The problem
12143 was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
12144 boards using CFG_I2C_EEPROM_CCID.
12146 The change has been successfully tested on MPC8555CDS system.
12148 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
12150 commit 747f316cca484ed627a97dd3391febabce384186
12151 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12152 Date: Tue Sep 30 20:08:49 2008 +0200
12154 update uImage FIT multi documentation
12156 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12158 commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
12159 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12160 Date: Tue Sep 30 20:08:36 2008 +0200
12162 move README.imx31 to doc/ and merge with README.mx31
12164 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12166 commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
12167 Author: Guennadi Liakhovetski <lg@denx.de>
12168 Date: Thu Sep 25 20:54:37 2008 +0200
12170 i.MX31: switch to CFG_HZ=1000
12172 Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
12173 cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
12174 provides 2% or 0.4% precision depending on the
12175 CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
12178 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
12180 commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
12181 Author: gnusercn <gnusercn@gmail.com>
12182 Date: Wed Oct 8 18:58:58 2008 +0200
12184 Fix bug: in arch-arm, env_get_char dose not work fine
12186 due to the arm implementation which supposed that U-Boot is in RAM
12187 when we jump to start_armboot
12189 Signed-off-by: gnusercn <gnusercn@gmail.com>
12190 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12192 commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
12193 Author: Adam Graham <agraham@amcc.com>
12194 Date: Mon Oct 6 10:16:13 2008 -0700
12196 ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
12198 After changing SDRAM_CLKTR phase value rerun the memory preload
12199 initialization sequence (INITPLR) to reset and relock the memory
12200 DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
12201 adjustment effects the phase relationship of the internal, to the
12202 PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
12204 Signed-off-by: Adam Graham <agraham@amcc.com>
12205 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
12206 Signed-off-by: Stefan Roese <sr@denx.de>
12208 commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
12209 Author: Haiying Wang <Haiying.Wang@freescale.com>
12210 Date: Fri Oct 3 11:48:03 2008 -0400
12212 Remove redundant #define for MPC8536DS
12214 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
12216 commit 445a7b38308eb05b41de74165b20855db58c7ee5
12217 Author: Haiying Wang <Haiying.Wang@freescale.com>
12218 Date: Fri Oct 3 11:47:30 2008 -0400
12220 Add ID EEPROM support for MPC8572DS
12222 The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
12223 system information like mac addresses etc. This patch enables it.
12225 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
12227 commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
12228 Author: Haiying Wang <Haiying.Wang@freescale.com>
12229 Date: Fri Oct 3 11:46:59 2008 -0400
12231 Minor fixes for I2C address on MPC8572DS
12233 MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
12234 according to the board spec, and adds the 2nd i2c bus offset.
12236 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
12238 commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
12239 Author: Jason Jin <Jason.jin@freescale.com>
12240 Date: Sat Sep 27 14:40:57 2008 +0800
12242 Fix the incorrect DDR clk freq reporting on 8536DS
12244 On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
12245 The display is still sync mode DDR freq. This patch try to fix
12246 this. The display DDR freq is now the actual freq in both
12247 sync and async mode.
12249 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12251 commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
12252 Author: Kumar Gala <galak@kernel.crashing.org>
12253 Date: Tue Oct 7 10:28:46 2008 -0500
12255 85xx: Remove setting of *cache-line-size in device trees
12257 ePAPR says if the *cache-block-size is the same as *cache-line-size
12258 than we don't need the *cache-line-size property.
12260 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12262 commit cd3cb0d9269d155276b00207e3816a9347fd1c92
12263 Author: Gerald Van Baren <vanbaren@cideas.com>
12264 Date: Sat Oct 4 07:56:06 2008 -0400
12266 libfdt: Fix error in documentation for fdt_get_alias_namelen()
12268 Oops, screwed up the function name in the documenting comment for this
12269 function. Trivial correction in this patch.
12271 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
12272 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12274 commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
12275 Author: David Gibson <david@gibson.dropbear.id.au>
12276 Date: Wed Aug 20 16:55:14 2008 +1000
12278 libfdt: Add function to explicitly expand aliases
12280 Kumar has already added alias expansion to fdt_path_offset().
12281 However, in some circumstances it may be convenient for the user of
12282 libfdt to explicitly get the string expansion of an alias. This patch
12283 adds a function to do this, fdt_get_alias(), and uses it to implement
12286 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
12288 commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
12289 Author: Mike Frysinger <vapier@gentoo.org>
12290 Date: Thu Oct 2 01:55:38 2008 -0400
12292 cfi_flash: do not reset flash when probe fails
12294 The CFI flash driver starts at flash_init() which calls down into
12295 flash_get_size(). This starts by calling flash_detect_cfi(). If said
12296 function fails, flash_get_size() finishes by attempting to reset the
12297 flash. Unfortunately, it does this with an info->portwidth set to 0x10
12298 which filters down into flash_make_cmd() and that happily smashes the
12299 stack by sticking info->portwidth bytes into a cfiword_t variable that
12300 lives on the stack. On a 64bit system you probably won't notice, but
12301 killing the last 8 bytes on a 32bit system usually leads to a corrupt
12302 return address. Which is what happens on a Blackfin system.
12304 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12305 Signed-off-by: Stefan Roese <sr@denx.de>
12307 commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
12308 Author: Stefan Roese <sr@denx.de>
12309 Date: Fri Sep 26 17:03:26 2008 +0200
12311 fdt: Overwrite /chosen node in bootm if it already exists in the dtb
12313 Set force parameter in fdt_chosen() call in do_bootm_linux() call.
12314 Without this, the chosen node is not overwritten if it already
12317 Signed-off-by: Stefan Roese <sr@denx.de>
12319 commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
12320 Author: Jon Loeliger <jdl@freescale.com>
12321 Date: Thu Sep 25 11:02:17 2008 -0500
12323 Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
12325 Using Gcc 4.3 detected this problem:
12327 ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
12328 ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
12329 occur when assuming that (X + c) < X is always false
12331 To fix the problem, treat the offset as an unsigned int.
12333 The problem report and proposed fix were provided
12334 by Steve Papacharalambous <stevep@freescale.com>.
12336 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12338 commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
12339 Author: David Gibson <david@gibson.dropbear.id.au>
12340 Date: Fri Aug 29 14:19:13 2008 +1000
12342 libfdt: Fix bugs in fdt_get_path()
12344 The current implementation of fdt_get_path() has a couple of bugs,
12345 fixed by this patch.
12347 First, contrary to its documentation, on success it returns the length
12348 of the node's path, rather than 0. The testcase is correspondingly
12349 wrong, and the patch fixes this as well.
12351 Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
12352 instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
12353 Specifically this happens when there is insufficient space even to
12354 hold the path's second last component. This behaviour is corrected,
12355 and the testcase updated to check it.
12357 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
12359 commit 33af3e6656e84660d397b5dd95abab2dccc36f83
12360 Author: Wolfgang Denk <wd@denx.de>
12361 Date: Wed Oct 1 12:34:58 2008 +0200
12363 TQM5200: enable support for ATAPI devices
12365 Signed-off-by: Wolfgang Denk <wd@denx.de>
12367 commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
12368 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12369 Date: Mon Sep 15 05:48:25 2008 +0200
12371 Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
12373 we need this due to the arm implementation which supposed that U-Boot
12374 is in RAM when we jump to start_armboot
12376 This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
12377 in order to do it for all arm board
12379 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12381 commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
12382 Author: Kim Phillips <kim.phillips@freescale.com>
12383 Date: Wed Sep 24 08:46:25 2008 -0500
12385 mpc83xx: don't disable autoboot
12387 bootdelay set to -1 'permanently' disables autobooting, even if
12388 bootcmd is specified. Change to a positive value to allow
12389 autobooting when a bootcmd is set.
12391 Reported-by: Coray Tate <Coray.Tate@freescale.com>
12392 Cc: Scott Wood <scottwood@freescale.com>
12393 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12395 commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
12396 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12397 Date: Wed Sep 24 10:42:15 2008 +0900
12399 mpc83xx: Fix typo in include/mpc83xx.h
12401 Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
12403 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12404 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12406 commit 162c41c03179727a1d14262f703c9a8bc40231fa
12407 Author: Kim Phillips <kim.phillips@freescale.com>
12408 Date: Tue Sep 23 09:38:49 2008 -0500
12410 mpc83xx: add h/w flash protection to board configs
12412 the operating system may leave flash in a h/w locked state after writing.
12413 This allows u-boot to continue to write flash by enabling h/w unlocking
12416 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12418 commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
12419 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12420 Date: Thu Sep 11 21:35:36 2008 +0400
12422 mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
12424 The spd_dram code shifts the base address, then masks 20 bits, but
12425 forgets to shift the base address back. Fix this by just masking the
12426 base address correctly.
12428 Found this bug while trying to relocate a DDR memory at the base != 0.
12430 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12431 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12433 commit 8fd4166c467a46773f80208bda1ec3b4757747bc
12434 Author: Stefan Roese <sr@denx.de>
12435 Date: Mon Sep 22 16:10:43 2008 +0200
12437 ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
12439 Depending on the configuration jumper "SATA SELECT", U-Boot disabled
12440 either one PCIe node or the SATA node in the device tree blob. This
12441 patch removes the unnecessary and even confusing warning, when the node
12442 is not found at all.
12444 Signed-off-by: Stefan Roese <sr@denx.de>
12446 commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
12447 Author: Remy Bohmer <linux@bohmer.net>
12448 Date: Fri Sep 19 13:30:06 2008 +0200
12450 Add missing device types to dev_print() in part.c
12452 Signed-off-by: Remy Bohmer <linux@bohmer.net>
12454 commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
12455 Author: Wolfgang Denk <wd@denx.de>
12456 Date: Mon Sep 22 22:23:06 2008 +0200
12458 Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
12459 eventually leads to a machine check. This change assures that DPRAM
12460 is allocated only once in that case.
12462 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12463 Signed-off-by: Wolfgang Denk <wd@denx.de>
12465 commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
12466 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
12467 Date: Wed Sep 17 17:57:34 2008 +0200
12469 Fix Spartan-3 definitions.
12471 A few Spartan-3 definitions erroneously use Spartan-3E size
12472 constants. This patch fixes them.
12474 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
12476 commit 28113e1f0da4146b823ffce37680d31d5685a60b
12477 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
12478 Date: Wed Sep 17 17:41:58 2008 +0200
12480 Remove duplicate Spartan-3E definition.
12482 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
12483 Signed-off-by: Wolfgang Denk <wd@denx.de>
12485 commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
12486 Author: Anatolij Gustschin <agust@denx.de>
12487 Date: Wed Sep 17 13:46:17 2008 +0200
12489 socrates: change default mtest address range
12491 Running mtest command on socrates without specifying
12492 an address range crashes the board. This patch changes
12493 default mtest address range to prevent this behavior.
12495 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12497 commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
12498 Author: Anatolij Gustschin <agust@denx.de>
12499 Date: Wed Sep 17 12:34:45 2008 +0200
12501 socrates: fix crash after relocation
12503 Currently U-Boot crashes after relocation to RAM.
12504 Changing the CPO value of the DDR SDRAM TIMING_CFG_2
12505 register to READ_LAT + 1 (to the value it was before
12506 conversion of socrates to new DDR code) fixes the
12509 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12511 commit 562788b0a303f3528b920d81f547f5ca77ba528e
12512 Author: Anatolij Gustschin <agust@denx.de>
12513 Date: Wed Sep 17 11:45:51 2008 +0200
12515 socrates: fix SPD EEPROM address
12517 Commit be0bd8234b9777ecd63c4c686f72af070d886517
12518 changed SPD EEPROM address to 0x51 and DDR SDRAM
12519 detection stopped working. Change this address
12522 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12524 commit 023824549a370bd185d7129d9a6c86f9be7b86a8
12525 Author: Stefan Roese <sr@denx.de>
12526 Date: Mon Sep 22 11:06:50 2008 +0200
12528 Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
12530 This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
12532 Signed-off-by: Stefan Roese <sr@denx.de>
12534 commit e58c41e26cf3c8accd60311be579f452e368e97e
12535 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12536 Date: Thu Sep 18 20:13:08 2008 +0900
12538 usb: Fix compile warning of r8a66597-hcd
12540 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12541 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12543 commit b5d10a13525c07ec6374adf840d7c87553b5f189
12544 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12545 Date: Thu Sep 18 19:34:36 2008 +0900
12547 sh: Fix compile warning
12549 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12551 commit 4a065abf926f128beb36d93449defa0d690e7fef
12552 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12553 Date: Thu Sep 18 19:04:26 2008 +0900
12555 sh: Add support watchdog for SH4A core
12557 Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
12558 And fix some compile warning.
12560 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12562 commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
12563 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12564 Date: Wed Sep 17 11:45:26 2008 +0900
12566 sh: Fix typo in SH serial driver
12568 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12569 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12571 commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
12572 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12573 Date: Wed Sep 17 11:08:36 2008 +0900
12575 sh: Add support any page size and empty_zero_page to SH Linux uImage
12577 Old U-Boot supported 4KB page size only. If this version, Linux
12578 kernel can not get command line from U-Boot.
12579 SH Linux kernel can change page size and empty_zero_page.
12580 This patch support this function and fix promlem.
12582 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12583 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12585 commit ce9f99ddb59628f41dc534e892368a7d66dfc774
12586 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12587 Date: Thu Aug 28 13:40:52 2008 +0900
12589 sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
12591 Add function of smc911x, pkt_data_pull and pkt_data_push.
12593 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12594 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12596 commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
12597 Author: Wolfgang Denk <wd@denx.de>
12598 Date: Thu Sep 18 13:57:32 2008 +0200
12600 ADS5121: fix typo in "rootpath" default setting
12602 Signed-off-by: Wolfgang Denk <wd@denx.de>
12604 commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
12605 Author: Remy Bohmer <linux@bohmer.net>
12606 Date: Tue Sep 16 14:55:44 2008 +0200
12608 USB layer of U-Boot causes USB protocol errors while using USB memory sticks
12610 There are several differences between Linux, Windows and U-boot for initialising the
12611 USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
12612 things really different, and some are wrong (compared to the USB standard).
12614 This patch fixes some errors:
12615 * The NEW_init procedure that was already in the code is good, while the old procedure
12616 is wrong. See code comments for more info.
12617 * On a Control request the data returned by the device can be more than 8 bytes, while
12618 the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
12619 This results in a lot of USB sticks not being recognised, and the transmission ended
12620 frequently with a CTL:TIMEOUT Error.
12621 * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
12623 Signed-off-by: Remy Bohmer <linux@bohmer.net>
12624 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12626 commit 6f5794a6f78b313231256958fd73673c6aacc116
12627 Author: Remy Bohmer <linux@bohmer.net>
12628 Date: Tue Sep 16 14:55:43 2008 +0200
12630 Refactoring parts of the common USB OHCI code
12632 This patch refactors some large routines of the USB OHCI code by
12633 making some routines smaller and more readable which helps
12634 debugging and understanding the code. (Makes the code looks
12635 somewhat more like the Linux implementation.)
12637 Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
12639 Signed-off-by: Remy Bohmer <linux@bohmer.net>
12640 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12642 commit be19d324edc1a1d7f393d24e10d164cd94c91a00
12643 Author: Remy Bohmer <linux@bohmer.net>
12644 Date: Tue Sep 16 14:55:42 2008 +0200
12646 Fix for USB sticks not working on ARM while using GCC 4.x compilers
12648 The GCC-compiler makes an optimisation error while optimising the routine
12649 usb_set_maxpacket(). This should be fixed in the compiler in the first place,
12650 but there lots of compilers out there that makes this error, that it is
12651 probably wiser to workaround it in U-boot itself.
12653 What happens is that the register r3 is used as loop-counter 'i', but gets
12654 overwritten later on. From there it starts using register r3 for several other
12655 things and the assembler code is becoming a big mess. This is clearly a compiler bug.
12657 This error occurs on at least several versions of Code Sourcery Lite compilers
12658 for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
12659 compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
12661 We work around it by splitting up this routine in 2 parts, and making sure that
12662 the split out part is NOT inlined any longer. This will make GCC spit out assembler
12663 that do not show this problem. Another possibility is to adapt the Makefile to stop
12664 optimisation for the complete file. I think this solution is nicer.
12666 Signed-off-by: Remy Bohmer <linux@bohmer.net>
12667 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12669 commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
12670 Author: Wolfgang Denk <wd@denx.de>
12671 Date: Wed Sep 17 10:17:55 2008 +0200
12673 Coding style cleanup; update CHANEGLOG
12675 Signed-off-by: Wolfgang Denk <wd@denx.de>
12677 commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
12678 Author: Victor Gallardo <vgallardo@amcc.com>
12679 Date: Tue Sep 16 06:59:13 2008 -0700
12681 ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
12683 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
12684 Signed-off-by: Adam Graham <agraham@amcc.com>
12685 Signed-off-by: Stefan Roese <sr@denx.de>
12687 commit ce47eb402c5e29a025399dc282246414fc492940
12688 Author: Peter Tyser <ptyser@xes-inc.com>
12689 Date: Tue Sep 16 10:04:47 2008 -0500
12691 Support for multiple SGMII/TBI interfaces for TSEC ethernet
12693 Fix TBI PHY accesses to use the proper offset in CPU register space. The
12694 previous code would incorrectly access the TBI PHY by reading/writing to CPU
12695 register space at the same location as would be used to access external PHYs.
12697 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12698 Acked-by: Andy Fleming <afleming@freescale.com>
12700 commit 7c803be2eb3cae245dedda438776e08fb122250f
12701 Author: Wolfgang Denk <wd@denx.de>
12702 Date: Tue Sep 16 18:02:19 2008 +0200
12704 TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
12706 After switching to using the CFI flash driver, the correct remapping
12707 of the flash banks was forgotten.
12709 Also, some boards were not adapted, and the old legacy flash driver
12710 was not removed yet.
12712 Signed-off-by: Wolfgang Denk <wd@denx.de>
12714 commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
12715 Author: Wolfgang Denk <wd@denx.de>
12716 Date: Sun Sep 14 00:59:35 2008 +0200
12718 Prepare v2008.10-rc2
12720 Signed-off-by: Wolfgang Denk <wd@denx.de>
12722 commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
12723 Author: Wolfgang Denk <wd@denx.de>
12724 Date: Sat Sep 13 02:23:05 2008 +0200
12726 Coding style cleanup, update CHANGELOG
12728 Signed-off-by: Wolfgang Denk <wd@denx.de>
12730 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
12731 Author: Peter Tyser <ptyser@xes-inc.com>
12732 Date: Wed Sep 10 09:18:34 2008 -0500
12734 Update mailing list email and archive addresses
12736 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12738 commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
12739 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
12740 Date: Thu Sep 11 15:40:01 2008 +0200
12742 85xx: socrates: autoprobe Lime chip
12744 This patch is an attempt to implement autoprobing for the Lime
12745 presence on the bus.
12746 Configure GPCM for Lime CS2 and try to access chip ID registers.
12747 Second read atempt delivers register values if the chip is present.
12749 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12751 commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
12752 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
12753 Date: Thu Sep 11 15:40:01 2008 +0200
12755 85xx: socrates: Add support for new image format.
12757 Signed-off-by: Detlev Zundel <dzu@denx.de>
12759 commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
12760 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12761 Date: Thu Sep 11 17:28:18 2008 +0900
12763 sh: Fix compile error for r2dplus
12765 netdev.h was not include by r2dplus.
12767 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12769 commit 56844a22b76c719e600047e23b80465a44d76abd
12770 Author: Heiko Schocher <hs@denx.de>
12771 Date: Thu Sep 11 08:11:23 2008 +0200
12773 powerpc: Fix bootm to boot up again with a Ramdisk
12775 Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
12776 and this stopped Linux from booting with a Ramdisk. This patch fixes
12777 this, by deleting the useless dummy mem reservation.
12779 When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
12780 added to of_size, so we dont need anymore a dummy mem reservation.
12782 I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
12783 system (=0x44 bytes) and rounded it up to 0x80).
12785 Signed-off-by: Heiko Schocher <hs@denx.de>
12786 Acked-by: Kumar Gala <galak@kernel.crashing.org>
12788 commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
12789 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
12790 Date: Mon Sep 8 02:46:13 2008 +0200
12792 Add support for LZMA uncompression algorithm.
12794 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
12795 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12797 commit 0008b6d968160abe2bfd936493f3a516a7c8da20
12798 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12799 Date: Fri Jun 27 23:04:20 2008 +0400
12801 fsl_elbc_nand: ecclayout cleanups
12803 This patch deletes oobavail assignments, they're calculated by the nand
12804 core code in nand_scan_tail, plus current oobavail values are wrong for
12807 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12808 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
12809 Signed-off-by: Scott Wood <scottwood@freescale.com>
12811 commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
12812 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12813 Date: Fri Jun 27 23:04:13 2008 +0400
12815 fsl_elbc_nand: implement support for flash-based BBT
12817 This patch implements support for flash-based BBT for chips working
12818 through ELBC NAND controller, so that NAND core will not have to re-scan
12819 for bad blocks on every boot.
12821 Because ELBC controller may provide HW-generated ECCs we should adjust
12822 bbt pattern and bbt version positions in the OOB free area.
12824 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12825 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
12826 Signed-off-by: Scott Wood <scottwood@freescale.com>
12828 commit 97ae023648e764f794ffb9c52da109d6caf09c47
12829 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12830 Date: Fri Jun 27 23:04:04 2008 +0400
12832 fsl_elbc_nand: fix OOB workability for large page NAND chips
12834 For large page chips, nand_bbt is looking into OOB area, and checking
12835 for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
12836 reserved for bbt means.
12838 But ELBC driver is specifying ecclayout so that oobfree area starts at
12839 offset 1, so only one byte left for the bbt purposes.
12841 This causes problems with any OOB users, namely JFFS2: after first mount
12842 JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
12844 OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
12845 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
12846 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
12847 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
12849 And on the next boot, NAND core will rescan for bad blocks, then will
12850 see "0xff 0x19" pattern, and will mark all blocks as bad ones.
12852 To fix the issue we should implement our own bad block pattern: just one
12853 byte at OOB start. Though, this will work only for x8 chips. For x16
12854 chips two bytes must be checked. Since ELBC driver does not support x16
12855 NANDs (yet), we're safe for now.
12857 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12858 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
12859 Signed-off-by: Scott Wood <scottwood@freescale.com>
12861 commit 7238ada313057a85409485b8ee21515dc10c07a5
12862 Author: Wolfgang Denk <wd@denx.de>
12863 Date: Fri Sep 12 13:52:21 2008 +0200
12865 MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
12867 Signed-off-by: Wolfgang Denk <wd@denx.de>
12869 commit b18410e508a12ba0a177dfc2a386857c806fa96d
12870 Author: Stefan Roese <sr@denx.de>
12871 Date: Thu Sep 11 13:05:56 2008 +0200
12873 ppc4xx: Enable device tree (FDT) support in zeus board port
12875 Signed-off-by: Stefan Roese <sr@denx.de>
12877 commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
12878 Author: Stefan Roese <sr@denx.de>
12879 Date: Wed Sep 10 16:53:47 2008 +0200
12881 ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
12883 This patch fixes a problem introdiced with patch
12884 bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
12887 The boards affected are:
12894 Signed-off-by: Stefan Roese <sr@denx.de>
12896 commit 61737c59a3285f6fadf96a5836879898c04ec28d
12897 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12898 Date: Thu Sep 11 19:41:26 2008 -0400
12900 ppc4xx: Add .gitignore file to xilinx-ppc440 boards
12902 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12903 Signed-off-by: Stefan Roese <sr@denx.de>
12905 commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
12906 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12907 Date: Thu Sep 11 19:41:25 2008 -0400
12909 ppc4xx: Fix compilation of v5fx30teval_flash
12911 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12912 Signed-off-by: Stefan Roese <sr@denx.de>
12914 commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
12915 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12916 Date: Wed Sep 10 17:44:30 2008 -0400
12918 ppc4xx: Fix in-tree build for ppc440-generic boards
12920 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12921 Signed-off-by: Stefan Roese <sr@denx.de>
12923 commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
12924 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12925 Date: Fri Sep 12 02:20:47 2008 +0200
12927 ARM: synchronize mach-types.h with linux 2.6.27-rc6
12929 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12931 commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
12932 Author: Jens Scharsig <esw@bus-elektronik.de>
12933 Date: Fri Sep 12 02:20:47 2008 +0200
12935 at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
12937 This patch prevents linker error on AT91RM9200 boards, if
12938 CONFIG_CMD_I2_TREE is set.
12939 It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
12941 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
12943 commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
12944 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12945 Date: Fri Sep 12 02:20:47 2008 +0200
12947 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
12949 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
12951 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12953 commit 03db53335c8eba656a7c44d1555b1a4514383e33
12954 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12955 Date: Fri Sep 12 02:20:46 2008 +0200
12957 make: Remove redundant __ARM__ addition when cross-compiling on *BSD
12959 __ARM__ is given by arm_config.mk automatically.
12961 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12963 commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
12964 Author: Claudio Scordino <claudio@evidence.eu.com>
12965 Date: Fri Sep 12 02:20:46 2008 +0200
12967 Fix MACH_TYPE for the AT91RM9200DK board.
12969 Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
12971 commit 274737e5eb25b2bcd3af3a96da923effd543284f
12972 Author: Andrew Dyer <adyer@righthandtech.com>
12973 Date: Fri Sep 12 02:20:46 2008 +0200
12975 i.mx change get_timer(base) to return time since base
12977 This patch changes get_timer() for i.MX to return the time since
12978 'base' instead of the time since the counter was at zero.
12980 Symptom seen is flash timeout errors when erasing or programming a
12981 sector using the common cfi flash code.
12983 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
12985 commit 48fed40575b3e8eae960eb0141509ddd9a73012a
12986 Author: Andrew Dyer <adyer@righthandtech.com>
12987 Date: Fri Sep 12 02:20:46 2008 +0200
12989 i.MX use u-boot baud rate and don't assume UART master clock
12991 1) Change the i.MX serial driver to use the baud rate set in the
12994 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
12996 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
12997 one to clear" like other status bits in the reg.)
12999 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
13001 commit 6e1551a870d360805b9d172dc56d935064abe71d
13002 Author: Andrew Dyer <adyer@righthandtech.com>
13003 Date: Fri Sep 12 02:20:46 2008 +0200
13005 arm920t fix constant error in start.S
13007 Code in cpu/arm920t/start.S will die with a compilation error if
13008 CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
13009 the ARM sub instruction. Change the code so that each is subtracted
13010 independently to avoid the error.
13012 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
13014 commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
13015 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
13016 Date: Fri Sep 12 02:20:40 2008 +0200
13018 ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
13020 - Correct Invalid #define of MPUTIM_PTV_MASK for
13021 omap1510 & omap730 register definition
13023 MPUTIM_PTV_MASK is defined as
13024 #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
13026 while it should have been
13027 #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
13029 - Below Patch corrects the same
13031 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
13033 commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
13034 Author: Adrian Filipi <adrian.filipi@eurotech.com>
13035 Date: Fri Jul 18 11:52:02 2008 -0400
13037 Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
13039 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
13041 commit eb16135df20535b0d19969f50fb5bd17f95e9c25
13042 Author: Guennadi Liakhovetski <lg@denx.de>
13043 Date: Thu Aug 28 12:25:11 2008 +0200
13045 i.MX31: document timer precision option
13047 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
13049 commit 1a6337b01351b82a45b0defa76f08744511c580b
13050 Author: Magnus Lilja <lilja.magnus@gmail.com>
13051 Date: Fri Aug 29 10:36:18 2008 +0200
13053 i.MX31: Make the SPI bus and chip select configurable for MC13783
13055 The i.MX31 has three SPI buses and each bus has several chip selects
13056 and the MC13783 chip can be connected to any of these. The current
13057 RTC driver for MC13783 is hardcoded for CSPI2/SS2.
13059 This patch makes make MC13783 SPI bus and chip select configurable
13060 via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
13062 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
13064 commit 8c4ebec25b21e355b8488698ec1594da9701fff4
13065 Author: Magnus Lilja <lilja.magnus@gmail.com>
13066 Date: Fri Aug 29 10:36:17 2008 +0200
13068 i.MX31: Add reset_timer() and modify get_timer_masked().
13070 This patch adds the reset_timer() function (needed by nand_base.c) and
13071 modifies the get_timer_masked() to work in the same way as the omap24xx
13074 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
13076 commit deeec4991a55de243787002ede24d2331d234fc8
13077 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13078 Date: Wed Sep 10 22:48:09 2008 +0200
13080 ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
13082 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13084 commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
13085 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13086 Date: Wed Sep 10 22:48:09 2008 +0200
13088 bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
13090 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13092 commit 0e8d158664a913392cb01fb11a948d83f72e105e
13093 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13094 Date: Wed Sep 10 22:48:06 2008 +0200
13096 rename CFG_ENV macros to CONFIG_ENV
13098 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13100 commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
13101 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13102 Date: Wed Sep 10 22:48:05 2008 +0200
13104 nvedit: rename error comment to CONFIG_ENV_IS_IN_
13106 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13108 commit b64b775e7546ed138df360ceb3a71ee358cb9a01
13109 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13110 Date: Wed Sep 10 22:48:05 2008 +0200
13112 cmd_mem: Move conditional compilation to Makefile
13114 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13116 commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
13117 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13118 Date: Wed Sep 10 22:48:05 2008 +0200
13120 move cmd_get_data_size to command.c
13122 add CMD_DATA_SIZE macro to enable it
13124 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13126 commit 507641d2491980531932b9f25dab37fe5e6c3a1a
13127 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13128 Date: Wed Sep 10 22:48:04 2008 +0200
13130 env_flash: Move conditional compilation to Makefile
13132 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13134 commit 5a1aceb0689e2f731491838970884a673ef7e7d3
13135 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13136 Date: Wed Sep 10 22:48:04 2008 +0200
13138 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
13140 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13142 commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
13143 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13144 Date: Wed Sep 10 22:48:03 2008 +0200
13146 cleanup use of CFG_ENV_IS_IN_FLASH
13148 - #if CFG_ENV_IS_IN_FLASH
13149 - #if (CFG_ENV_IS_IN_FLASH == 1)
13150 - #define CFG_ENV_IS_IN_FLASH 0
13152 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13154 commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
13155 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13156 Date: Wed Sep 10 22:48:01 2008 +0200
13158 rename environment.c in env_embedded.c to reflect is functionality
13160 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13162 commit c0878af6e32f0fd8e13a6ca315b9add64441115a
13163 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13164 Date: Wed Sep 10 22:48:01 2008 +0200
13166 env_nowhere: Move conditional compilation to Makefile
13168 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13170 commit 93f6d72544da4510a146bc4c93d609b0116cde37
13171 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13172 Date: Wed Sep 10 22:48:00 2008 +0200
13174 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
13176 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13178 commit 2556ef78113b5f089dfcac5da90bf31dd568397b
13179 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13180 Date: Wed Sep 10 22:48:00 2008 +0200
13182 env_sf: Move conditional compilation to Makefile
13184 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13186 commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
13187 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13188 Date: Wed Sep 10 22:48:00 2008 +0200
13190 rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
13192 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13194 commit 55c5f49910ec8225347aa1d211352a84de6649b4
13195 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13196 Date: Wed Sep 10 22:48:00 2008 +0200
13198 env_onenand: Move conditional compilation to Makefile
13200 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13202 commit 9656138ff1a34d4c4768db6b490deffc40ee674b
13203 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13204 Date: Wed Sep 10 22:47:59 2008 +0200
13206 rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
13208 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13210 commit 957a0e69575683efd70ace147746bbb3d8e7c501
13211 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13212 Date: Wed Sep 10 22:47:59 2008 +0200
13214 env_nvram: Move conditional compilation to Makefile
13216 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13218 commit 9314cee6917444ab88bd4e758da7a30975120187
13219 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13220 Date: Wed Sep 10 22:47:59 2008 +0200
13222 rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
13224 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13226 commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
13227 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13228 Date: Wed Sep 10 22:47:59 2008 +0200
13230 env_nand: Move conditional compilation to Makefile
13232 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13234 commit 51bfee192099206a4397f15f3b93516e01f58ab0
13235 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13236 Date: Wed Sep 10 22:47:58 2008 +0200
13238 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
13240 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13242 commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
13243 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13244 Date: Wed Sep 10 22:47:58 2008 +0200
13246 env_dataflash: Move conditional compilation to Makefile
13248 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13250 commit 057c849c45b9ee19df8ff3acdeee66be52819962
13251 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13252 Date: Wed Sep 10 22:47:58 2008 +0200
13254 rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
13256 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13258 commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
13259 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13260 Date: Wed Sep 10 22:47:52 2008 +0200
13262 cmd_eeprom: Move conditional compilation to Makefile
13264 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13266 commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
13267 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13268 Date: Fri Sep 5 09:19:54 2008 +0200
13270 env_eeprom: Move conditional compilation to Makefile
13272 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13274 commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
13275 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13276 Date: Fri Sep 5 09:19:30 2008 +0200
13278 rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
13280 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13282 commit 32628c5008105a732212003d83b75f05e5243bb2
13283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13284 Date: Sat Aug 30 23:54:58 2008 +0200
13286 cmd_mac: Move conditional compilation to Makefile
13288 finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
13289 start in commit ad8f8687b78c3e917b173f038926695383c55555
13291 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13293 commit e5648acab153f0f429bfc714902c5aaa7879f71b
13294 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13295 Date: Sat Aug 30 23:47:41 2008 +0200
13297 cmd_fdc: Move conditional compilation to Makefile
13299 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13301 commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
13302 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13303 Date: Sat Aug 30 23:47:38 2008 +0200
13305 common/Makefile: add core command section
13307 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13309 commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
13310 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13311 Date: Sat Aug 30 23:29:57 2008 +0200
13313 cmd_vfd: Move conditional compilation to Makefile
13315 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13317 commit 6644641d072aee3087da129d8443187196a4d8a9
13318 Author: Scott Wood <scottwood@freescale.com>
13319 Date: Wed Sep 10 11:48:49 2008 -0500
13321 delta, zylonite: Update nand_oobinfo to nand_ecclayout.
13323 This is part of the switch to newer upstream MTD code.
13325 Signed-off-by: Scott Wood <scottwood@freescale.com>
13327 commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
13328 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13329 Date: Sat Aug 30 17:06:55 2008 -0400
13331 ARM DaVinci: Fix broken HW ECC for large page NAND.
13333 Based on original patch by Bernard Blackham <bernard@largestprime.net>
13335 U-boot's HW ECC support for large page NAND on Davinci is completely
13336 broken. Some kernels, such as the 2.6.10 one supported by
13337 MontaVista for DaVinci, rely upon this broken behaviour as they
13338 share the same code for ECCs. In the existing scheme, error
13339 detection *might* work on large page, but error correction
13340 definitely does not. Small page ECC correction works, but the
13341 format is not compatible with the mainline git kernel.
13343 This patch adds ECC code that matches what is currently in the
13344 Davinci git repository (since NAND support was added in 2.6.24).
13345 This makes the ECC and OOB layout written by u-boot compatible with
13346 Linux for both small page and large page devices and fixes ECC
13347 correction for large page devices.
13349 The old behaviour can be restored by defining the macro
13350 CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
13352 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13353 Acked-by: Sergey Kubushyn <ksi@koi8.net>
13354 Signed-off-by: Scott Wood <scottwood@freescale.com>
13356 commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
13357 Author: Heiko Schocher <hs@denx.de>
13358 Date: Wed Sep 10 11:15:28 2008 +0200
13360 muas3001: update BR4 settings
13362 Also set up the port pins for using I2C.
13364 Signed-off-by: Heiko Schocher <hs@denx.de>
13366 commit 3591293509e0c0bcf244b0f974775bff2e25697e
13367 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
13368 Date: Wed Sep 10 09:43:49 2008 +0300
13370 autoscr: Fix one-character lines and non-newline terminated scripts
13372 When not using hush, the autoscr command now executes lines that are
13373 only one character long. It also runs the last line of scripts even if
13374 it does not end in a newline.
13376 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
13378 commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
13379 Author: Victor Gallardo <vgallardo@amcc.com>
13380 Date: Tue Sep 9 15:13:29 2008 -0700
13382 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
13384 On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
13387 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
13389 commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
13390 Author: Heiko Schocher <hs@denx.de>
13391 Date: Mon Sep 8 10:21:11 2008 +0200
13393 muas3001: added support for the LM75 sensor.
13395 Signed-off-by: Heiko Schocher <hs@denx.de>
13397 commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
13398 Author: Heiko Schocher <hs@denx.de>
13399 Date: Mon Sep 8 10:20:19 2008 +0200
13401 muas3001: activate WDT for the muas3001 board.
13403 Signed-off-by: Heiko Schocher <hs@denx.de>
13405 commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
13406 Author: Heiko Schocher <hs@denx.de>
13407 Date: Mon Sep 8 10:19:36 2008 +0200
13409 muas3001: added 64MB SDRAM autodetection.
13411 Signed-off-by: Heiko Schocher <hs@denx.de>
13413 commit 5251469943895de4bb9a04d5053352cc22acb7d5
13414 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
13415 Date: Thu Aug 21 07:12:26 2008 -0700
13417 Fix printf errors under -DDEBUG
13419 Fix printf format-string/arg mismatches under -DDEBUG.
13421 These warnings occur with DEBUG defined for a platform using
13422 cpu/mpc85xx. Users of other architectures can unearth similar
13423 problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
13424 after "CFLAGS += $(call cc-option,-fno-stack-protector)".
13426 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
13427 Signed-off-by: Andy Fleming <afleming@freescale.com>
13429 commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
13430 Author: Wolfgang Denk <wd@denx.de>
13431 Date: Tue Sep 9 23:55:18 2008 +0200
13433 Update CHANGELOG, prepare 2008-10-rc1 release
13435 Signed-off-by: Wolfgang Denk <wd@denx.de>
13437 commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
13438 Author: Kumar Gala <galak@kernel.crashing.org>
13439 Date: Mon Sep 8 08:51:29 2008 -0500
13441 85xx: Ensure timebase is zero on secondary cores
13443 The e500um says the timebase is volatile out of reset. To ensure
13444 TB sync works we need to make sure its zero.
13446 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13448 commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
13449 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13450 Date: Tue Sep 9 22:18:24 2008 +0200
13452 bootm_load_os: fix load_end debug message
13454 print load_end value not pointer
13456 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13458 commit 1d9af0be764960e6cc1c093e97176c3542796820
13459 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13460 Date: Tue Sep 9 22:18:23 2008 +0200
13462 bootm: enable fdt support only on ppc, m68k and sparc
13464 ...as done in image.c
13466 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13468 commit 748b5274e76f81df85cfcffaffedc323678d0623
13469 Author: Markus Heidelberg <markus.heidelberg@web.de>
13470 Date: Tue Sep 9 18:51:05 2008 +0200
13472 common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
13474 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
13476 commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
13477 Author: Markus Heidelberg <markus.heidelberg@web.de>
13478 Date: Tue Sep 9 17:31:46 2008 +0200
13480 gitignore: add tags files and Vim swap file
13482 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
13484 commit 1d9b67b23fca6a25154333733204339802510720
13485 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
13486 Date: Tue Sep 9 17:52:47 2008 +0900
13488 add board_eth_init() for sh7785lcr board
13490 Fix the problem that cannot work RTL8169 on sh7785lcr board.
13492 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
13494 commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
13495 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13496 Date: Wed Aug 6 16:08:41 2008 -0500
13498 mtd: SPI Flash: Support the STMicro Flash
13500 Add MTD SPI Flash support for M25P16, M25P20, M25P32,
13501 M25P40, M25P64, M25P80, M25P128.
13503 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
13504 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13506 commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
13507 Author: Wolfgang Denk <wd@denx.de>
13508 Date: Tue Sep 9 17:55:31 2008 +0200
13510 trab: fix build problem after change to use do_div()
13512 We must link with libgeneric now.
13514 Signed-off-by: Wolfgang Denk <wd@denx.de>
13516 commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
13517 Author: Ryan CHEN <ryan.chen@st.com>
13518 Date: Wed Aug 20 13:00:17 2008 -0400
13520 Correct drv_usb_kbd_init function
13522 The patch is that check if usb_get_dev_index() function return valid
13523 pointer. If valid, continue. Otherwise return -1.
13525 Signed-off-by: Ryan Chen <ryan.chen@st.com>
13526 Acked-by: Markus Klotzbuecher <mk@denx.de>
13528 commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
13529 Author: Remy Bohmer <linux@bohmer.net>
13530 Date: Wed Aug 20 11:22:02 2008 +0200
13532 Make usb-stop() safe to call multiple times in a row.
13534 A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
13535 enabled the usb_stop() command in common/cmd_bootm.c which was
13536 not enabled for some time, because no board did actually set the
13537 CFG_CMD_USB flag. So, now the usb_stop() is executed before
13538 loading the linux kernel.
13540 However, the usb_ohci driver hangs up (at least on AT91SAM) if the
13541 driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
13542 If some other piece of code calls usb_stop() before the bootm command,
13543 this command will hangup the system during boot.
13544 (usb start and stop is typically used while booting from usb memory stick)
13546 But, stopping the usb stack twice is useless anyway, and a flag already
13547 existed that kept track on the usb_init()/usb_stop() calls.
13548 So, we now check if the usb stack is really started before we stop it.
13550 This problem is now fixed in both the upper as low-level layer.
13552 Signed-off-by: Remy Bohmer <linux@bohmer.net>
13553 Acked-by: Markus Klotzbuecher <mk@denx.de>
13555 commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
13556 Author: Wolfgang Denk <wd@denx.de>
13557 Date: Tue Sep 9 16:55:47 2008 +0200
13559 Makefile: fix bug introduced by commit 47ffd6c2
13561 commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
13562 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
13563 Date: Tue Sep 9 10:00:33 2008 -0400
13565 ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
13567 This patch solves the problems compiling ml507, v5fx30teval and
13568 ppc440-generic out of tree.
13570 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
13572 commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
13573 Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
13574 Date: Thu Sep 4 15:35:46 2008 -0300
13576 Fix dev_print when called from usb_stor_info (usb storage command)
13578 Fix output of the usb storage command. It was printing "Device 0: not
13579 available" because IF_TYPE_USB was not included into the switch
13582 Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
13584 commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
13585 Author: Bartlomiej Sieka <tur@semihalf.com>
13586 Date: Tue Sep 9 12:58:16 2008 +0200
13588 FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
13590 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13592 commit 919f550dc11a13abf01c6bc713c968de790b8d7c
13593 Author: Bartlomiej Sieka <tur@semihalf.com>
13594 Date: Tue Sep 9 12:58:15 2008 +0200
13596 FIT: add ability to check hashes of all images in FIT, improve output
13598 - add function fit_all_image_check_hashes() that verifies if all
13599 hashes of all images in the FIT are valid
13600 - improve output of fit_image_check_hashes() when the hash check fails
13602 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13604 commit 1de1fa408967cef6804bb046b904114519bb36f0
13605 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13606 Date: Mon Sep 8 20:54:39 2008 +0200
13608 qemu_mips: Update linux bootm to support dynamic cmdline
13610 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13612 commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
13613 Author: Peter Tyser <ptyser@xes-inc.com>
13614 Date: Mon Sep 8 14:56:49 2008 -0500
13616 Add support for booting of INTEGRITY operating system uImages
13618 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
13620 commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
13621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13622 Date: Mon Sep 8 21:01:29 2008 +0200
13624 mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
13626 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13628 commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
13629 Author: Kumar Gala <galak@kernel.crashing.org>
13630 Date: Mon Sep 8 13:57:12 2008 -0500
13632 Remove support for booting ARTOS images
13634 Pantelis Antoniou stated:
13635 AFAIK, it is still used but the products using PPC are long gone.
13636 Nuke it plz (from orbit).
13638 So remove it since it cleans up a usage of env_get_char outside of
13639 the environment code.
13641 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13643 commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
13644 Author: Wolfgang Denk <wd@denx.de>
13645 Date: Tue Sep 9 15:45:18 2008 +0200
13647 Makefile: compile and link each module just once
13649 Several source files need to be compiled and linked when one or more
13650 config options are selected. To allow for easy selection in the
13651 Makefiles yet to avoild multiple compilation (which costs build time)
13652 and especially multiple linking (which causes errors), we use
13653 "COBJS = $(sort COBJS-y)" which eliminates duplicates.
13655 By courtesy of Detlev Zundel who suggested this approach.
13657 Signed-off-by: Wolfgang Denk <wd@denx.de>
13659 commit 48d0192fe869948fef14b460b5f0c85bca933693
13660 Author: Andreas Engel <andreas.engel@ericsson.com>
13661 Date: Mon Sep 8 14:30:53 2008 +0200
13663 Moved conditional compile into Makefile
13665 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
13667 commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
13668 Author: Andreas Engel <andreas.engel@ericsson.com>
13669 Date: Mon Sep 8 10:17:31 2008 +0200
13671 Merged serial_pl010.c and serial_pl011.c.
13673 They only differ in the init function.
13674 This also adds the missing watchdog support for the PL011.
13676 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
13678 commit 0817d688f307ee2c0598e79175c94a40ce90337b
13679 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
13680 Date: Sun Sep 7 17:10:27 2008 -0400
13682 Remove gap fill in srec object v2
13684 SREC files do not need gap fill: The load address is specified in the
13685 file. On the other hand, it can't be avoided in a .bin object. It has
13686 no information about memory location.
13688 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
13690 commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
13691 Author: Markus Heidelberg <markus.heidelberg@web.de>
13692 Date: Sun Sep 7 20:18:27 2008 +0200
13694 README: fix missing subdirectory in the documentation
13696 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
13698 commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
13699 Author: Graeme Russ <graeme.russ@gmail.com>
13700 Date: Sun Sep 7 07:08:42 2008 +1000
13702 Update i386 code (sc520_cdp)
13704 Attempt to bring i386 / sc520 inline with master
13706 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
13708 commit 5608692104efa8d56df803dc79ea41ac3607eee5
13709 Author: Guennadi Liakhovetski <lg@denx.de>
13710 Date: Thu Sep 4 13:01:49 2008 +0200
13712 fw_env: add NAND support
13714 Add support for environment in NAND with automatic NOR / NAND recognition,
13715 including unaligned environment, bad-block skipping, redundant environment
13718 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
13720 commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
13721 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13722 Date: Tue Sep 9 09:50:24 2008 +0200
13724 ppc4xx: Fix out-of-tree building of CPCI405 variants
13726 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13727 Acked-by: Stefan Roese <sr@denx.de>
13729 commit 59f630588e3fdbd698a0a2798e52a8924e899563
13730 Author: Sergei Poselenov <sposelenov@emcraft.com>
13731 Date: Fri Aug 15 15:42:11 2008 +0200
13733 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
13735 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
13737 commit e64987a892353f3d49eb242d997820ef8f538912
13738 Author: Anatolij Gustschin <agust@denx.de>
13739 Date: Fri Aug 15 15:42:13 2008 +0200
13741 85xx: socrates: Enable Lime support.
13743 This patch adds Lime GDC support together with support for the PWM
13744 backlight control through the w83782d chip. The reset pin of the
13745 latter is attached to GPIO, so we need to reset it in
13746 early_board_init_r.
13748 Signed-off-by: Anatolij Gustschin <agust@denx.de>
13750 commit 3e79b588b5199f35016f178fc0d5d1266382097f
13751 Author: Detlev Zundel <dzu@denx.de>
13752 Date: Fri Aug 15 15:42:12 2008 +0200
13754 85xx: Socrates: Major code update.
13756 - Update the local bus ranges in the FDT for Linux for the various
13757 devices connected to the local bus via chip-select.
13759 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
13760 lower than 66 MHz and uses I/O accessor functions consequently.
13764 - Update of default environment and configuration. Use I2C multibus
13765 as we do have two I2C buses. Also enable sdram and ext2 commands.
13767 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
13768 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
13769 Signed-off-by: Detlev Zundel <dzu@denx.de>
13771 commit e8d18541c6ceab821f75faab031740b33fdbfa4b
13772 Author: Timur Tabi <timur@freescale.com>
13773 Date: Fri Jul 18 16:52:23 2008 +0200
13775 Update Freescale 85xx boards to sys_eeprom.c
13777 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
13778 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
13779 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
13780 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
13782 Signed-off-by: Timur Tabi <timur@freescale.com>
13784 commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
13785 Author: Wolfgang Denk <wd@denx.de>
13786 Date: Tue Sep 9 10:08:02 2008 +0200
13788 lib_ppc/interrupts.c: make board_show_activity() a weak function
13790 This allows to use show_activity() without having to
13791 define an empty board_show_activity() function.
13793 Signed-off-by: Wolfgang Denk <wd@denx.de>
13795 commit fe876787f8743883ce58fed61525eaa2f34da4c5
13796 Author: Wolfgang Denk <wd@denx.de>
13797 Date: Tue Sep 9 10:06:44 2008 +0200
13799 stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
13801 Signed-off-by: Wolfgang Denk <wd@denx.de>
13803 commit 965de106ba8900372c8b16dc60d5acab7f925e38
13804 Author: Wolfgang Denk <wd@denx.de>
13805 Date: Tue Sep 9 10:03:47 2008 +0200
13807 NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
13809 Signed-off-by: Wolfgang Denk <wd@denx.de>
13811 commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
13812 Author: Sergei Poselenov <sposelenov@emcraft.com>
13813 Date: Fri Aug 15 15:42:11 2008 +0200
13815 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
13817 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
13819 commit 36241ca29d4804a1006fb3f26069effda5202581
13820 Author: Anatolij Gustschin <agust@denx.de>
13821 Date: Fri Aug 15 15:42:13 2008 +0200
13823 85xx: socrates: Enable Lime support.
13825 This patch adds Lime GDC support together with support for the PWM
13826 backlight control through the w83782d chip. The reset pin of the
13827 latter is attached to GPIO, so we need to reset it in
13828 early_board_init_r.
13830 Signed-off-by: Anatolij Gustschin <agust@denx.de>
13832 commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
13833 Author: Detlev Zundel <dzu@denx.de>
13834 Date: Fri Aug 15 15:42:12 2008 +0200
13836 85xx: Socrates: Major code update.
13838 - Update the local bus ranges in the FDT for Linux for the various
13839 devices connected to the local bus via chip-select.
13841 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
13842 lower than 66 MHz and uses I/O accessor functions consequently.
13846 - Update of default environment and configuration. Use I2C multibus
13847 as we do have two I2C buses. Also enable sdram and ext2 commands.
13849 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
13850 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
13851 Signed-off-by: Detlev Zundel <dzu@denx.de>
13853 commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
13854 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13855 Date: Tue Sep 9 01:22:39 2008 +0200
13857 disk-on-chip: remove duplicate doc_probe declaration
13859 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13861 commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
13862 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13863 Date: Tue Sep 9 00:59:40 2008 +0200
13865 onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
13867 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13869 commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
13870 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13871 Date: Tue Sep 9 00:59:39 2008 +0200
13873 rs5c372: fix rtc_set prototype
13875 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13877 commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
13878 Author: Sergei Poselenov <sposelenov@emcraft.com>
13879 Date: Thu Aug 14 14:08:28 2008 +0200
13881 ARM: fix warning: target CPU does not support interworking
13883 This patch fixes warnings like this:
13885 start.S:0: warning: target CPU does not support interworking
13887 which come from some ARM cross compilers and are caused by hard-coded
13888 (with "--with-cpu=arm9" configuration option) ARM targets (which
13889 support ARM Thumb instructions), while the ARM target selected from
13890 the command line (with "-march=armv4") doesn't support Thumb
13893 This warning is issued by the compiler regardless of the real use of
13894 the Thumb instructions in code.
13896 To fix this problem, we use options according to compiler version
13899 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
13900 Signed-off-by: Wolfgang Denk <wd@denx.de>
13902 commit 4265c35fbcb248e58179007621d61d32d0b3b82a
13903 Author: Sergei Poselenov <sposelenov@emcraft.com>
13904 Date: Thu Aug 14 14:08:28 2008 +0200
13906 ARM: Use do_div() instead of division for "long long".
13908 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
13909 Signed-off-by: Wolfgang Denk <wd@denx.de>
13911 commit 8febd13c69cb68652577d1a9fcbde954bf784155
13912 Author: Timur Tabi <timur@freescale.com>
13913 Date: Fri Jul 18 16:52:23 2008 +0200
13915 Update Freescale 85xx boards to sys_eeprom.c
13917 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
13918 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
13919 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
13920 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
13922 Signed-off-by: Timur Tabi <timur@freescale.com>
13924 commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
13925 Author: Wolfgang Denk <wd@denx.de>
13926 Date: Mon Sep 8 23:26:22 2008 +0200
13928 lib_arm/bootm.c: fix compile warnings
13930 bootm.c:128: warning: label 'error' defined but not used
13931 bootm.c:65: warning: unused variable 'ret'
13933 Signed-off-by: Wolfgang Denk <wd@denx.de>
13935 commit 2e3c867d0a63c563a51e65b776973b008f16cec5
13936 Author: Wolfgang Denk <wd@denx.de>
13937 Date: Mon Sep 8 22:46:42 2008 +0200
13939 ml507: fix out of tree build problem
13941 Signed-off-by: Wolfgang Denk <wd@denx.de>
13943 commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
13944 Author: Wolfgang Denk <wd@denx.de>
13945 Date: Mon Sep 8 22:10:28 2008 +0200
13947 common/cmd_bootm.c: fix printf() format warnings
13949 Signed-off-by: Wolfgang Denk <wd@denx.de>
13951 commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
13952 Author: Wolfgang Denk <wd@denx.de>
13953 Date: Mon Sep 8 22:37:45 2008 +0200
13955 BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
13957 missing doc_probe() prototype.
13959 Signed-off-by: Wolfgang Denk <wd@denx.de>
13961 commit 2c5e3cc4994897d364b148942ff23e47783198f6
13962 Author: Wolfgang Denk <wd@denx.de>
13963 Date: Mon Sep 8 21:28:14 2008 +0200
13965 mk48t59: fix compile problem introduced by commit d1e23194
13967 Signed-off-by: Wolfgang Denk <wd@denx.de>
13969 commit 5ff889349d2ace13f10c9335e09365fcec8247cc
13970 Author: Stefan Roese <sr@denx.de>
13971 Date: Mon Sep 8 14:11:12 2008 +0200
13973 ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
13975 This patch moves some 4xx specific prototypes out of include common.h
13976 to a ppc4xx specific header.
13978 Signed-off-by: Stefan Roese <sr@denx.de>
13980 commit ac53ee8318678190bf3c68da477a84a657d86fb0
13981 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13982 Date: Fri Sep 5 15:34:04 2008 +0200
13984 ppc4xx: Update CPCI405(AB) configuration
13986 This patch add FDT support and command line editing capabilities
13987 for CPCI405 and CPCI405AB boards.
13989 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13990 Signed-off-by: Stefan Roese <sr@denx.de>
13992 commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
13993 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13994 Date: Fri Sep 5 15:34:03 2008 +0200
13996 ppc4xx: Cleanup CPCI405 linker script
13998 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13999 Signed-off-by: Stefan Roese <sr@denx.de>
14001 commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
14002 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14003 Date: Fri Sep 5 15:34:02 2008 +0200
14005 ppc4xx: Update CPCI405 variants handling
14007 This patch replaces the BOARD_REVISION variable in include/config.mk
14008 by a using a temporary include file in the platform directory.
14010 The former way does not work anymore and the latter is also used by
14013 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14014 Signed-off-by: Stefan Roese <sr@denx.de>
14016 commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
14017 Author: Stefan Roese <sr@denx.de>
14018 Date: Mon Sep 8 10:01:48 2008 +0200
14020 ppc4xx: Remove CONFIG_CS8952_PHY define
14022 Since this define is only used on one board that was never really in
14023 production, removing this compile time option doesn't hurt and makes
14024 the code more readable.
14026 Signed-off-by: Stefan Roese <sr@denx.de>
14028 commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
14029 Author: Stefan Roese <sr@denx.de>
14030 Date: Fri Sep 5 14:11:40 2008 +0200
14032 ppc4xx: Fix compilation warning for PIP405
14034 This patch fixes a compilation warning for the PIP405 board. It moves the
14035 #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
14036 occur anymore. I am a little unsure if this #ifdef is at the correct
14037 place now or if it could be removed completely. This needs to get
14038 tested on the PIP405 board.
14040 Signed-off-by: Stefan Roese <sr@denx.de>
14042 commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
14043 Author: Stefan Roese <sr@denx.de>
14044 Date: Fri Sep 5 14:09:09 2008 +0200
14046 ppc4xx: Fix compilation warning for canyonlands & glacier
14048 Signed-off-by: Stefan Roese <sr@denx.de>
14050 commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
14051 Author: Kumar Gala <galak@kernel.crashing.org>
14052 Date: Fri Sep 5 14:40:29 2008 -0500
14054 Fix compiler warning in mpc8xxx ddr code
14056 ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
14057 ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
14058 ctrl_regs.c:523: note: 'caslat' was declared here
14060 Add a warning in DDR1 case if cas_latency isn't a value we know about.
14062 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14063 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14065 commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
14066 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14067 Date: Mon Sep 1 23:06:23 2008 +0200
14069 rtc: allow rtc_set to return an error and use it in cmd_date
14071 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14073 commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
14074 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14075 Date: Mon Sep 1 01:16:33 2008 +0200
14077 ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
14079 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14081 commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
14082 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14083 Date: Sun Aug 31 05:37:04 2008 +0900
14085 config.mk: Move arch-specific condition to $(ARCH)_config.mk
14087 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14089 commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
14090 Author: Kumar Gala <galak@kernel.crashing.org>
14091 Date: Fri Aug 29 19:08:29 2008 -0500
14093 Prevent crash if random/invalid ramdisks are passed to bootm
14095 Adds returning an error from the ramdisk detection code if
14096 its not a real ramdisk (invalid). There is no reason we can't
14097 just return back to the console if we detect an invalid
14098 ramdisk or CRC error.
14100 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14102 commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
14103 Author: Anatolij Gustschin <agust@denx.de>
14104 Date: Fri Aug 29 21:04:45 2008 +0200
14106 Prevent crash if random DTB address is passed to bootm
14108 This patch adds bootm_start() return value check. If
14109 error status is returned, we do not proceed further to
14110 prevent board reset or crash as we still can recover
14113 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14115 commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
14116 Author: Andrew Dyer <adyer@righthandtech.com>
14117 Date: Fri Aug 29 12:30:39 2008 -0500
14119 clean up some #if !defined() in drivers/video/cfb_console.c
14121 rearrange some #if !defined() / #else / #endif statements to remove
14122 the negative logic.
14124 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
14126 commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
14127 Author: Kyungmin Park <kmpark@infradead.org>
14128 Date: Fri Aug 29 09:02:20 2008 +0900
14130 apollon: use the last memory area for u-boot
14132 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14134 commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
14135 Author: Heiko Schocher <hs@denx.de>
14136 Date: Thu Aug 28 13:50:42 2008 +0200
14138 TQM8272: move NAND part in seperate File
14140 I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
14141 because I have no longer access to the hardware.
14143 Signed-off-by: Heiko Schocher <hs@denx.de>
14145 commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
14146 Author: Heiko Schocher <hs@denx.de>
14147 Date: Thu Aug 28 13:48:36 2008 +0200
14149 TQM8272: Fix compiling error for the TQM8272 board.
14151 Fix compile problems caused by
14152 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
14154 Signed-off-by: Heiko Schocher <hs@denx.de>
14156 commit 1a7f8ccec981648ccd38fca2535490582eee08e6
14157 Author: Kyungmin Park <kmpark@infradead.org>
14158 Date: Wed Aug 27 14:45:20 2008 +0900
14160 Add JFFS2 command support on OneNAND
14162 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14164 commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
14165 Author: Mark Jackson <mpfj@mimc.co.uk>
14166 Date: Mon Aug 25 19:21:30 2008 +0100
14168 Allow console input to be disabled
14170 Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
14172 When CONFIG_DISABLE_CONSOLE is defined, setting
14173 GD_FLG_DISABLE_CONSOLE disables all console input and output.
14175 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
14177 commit 2b22d608f370565c87f55928b524207031419c11
14178 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14179 Date: Wed Jul 30 12:39:29 2008 +0200
14181 loads: allow negative offsets
14183 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14185 commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
14186 Author: Yuri Tikhonov <yur@emcraft.com>
14187 Date: Thu Sep 4 11:19:05 2008 +0200
14189 USB EHCI: reset root hub
14191 Some of multi-function USB controllers (e.g. ISP1562) allow root hub
14192 resetting only via EHCI registers. So, this patch adds the
14193 corresponding kind of reset to OHCI's hc_reset() if the newly
14194 introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
14197 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14198 Acked-by: Markus Klotzbuecher <mk@denx.de>
14200 commit 5875d358f025c1b042d8a0f08384b756de7256c9
14201 Author: Yuri Tikhonov <yur@emcraft.com>
14202 Date: Fri Aug 15 15:42:09 2008 +0200
14204 RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
14206 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14208 commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
14209 Author: Stefan Roese <sr@denx.de>
14210 Date: Fri Sep 5 10:47:46 2008 +0200
14212 devices: Use list_add_tail() instead of list_add() to register a device
14214 This patch fixes a problem spotted on Glacier/Canyonlands (and most
14215 likely lots of other board ports), that no serial output was seen
14216 after console initialization in console_init_r(). This is because the
14217 last added console device was used instead of the first added.
14219 This patch fixes this problem by using list_add_tail() instead of
14220 list_add() to register a device. This way the first added console
14223 Signed-off-by: Stefan Roese <sr@denx.de>
14225 commit 78d78236896d62bb8ca7302af38d8f1493eb2651
14226 Author: Victor Gallardo <vgallardo@amcc.com>
14227 Date: Thu Sep 4 23:49:36 2008 -0700
14229 ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
14231 This patch adds GPCS, SGMII and M88E1112 PHY support
14232 for the AMCC PPC460GT/EX processors.
14234 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
14235 Signed-off-by: Stefan Roese <sr@denx.de>
14237 commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
14238 Author: Adam Graham <agraham@amcc.com>
14239 Date: Wed Sep 3 12:26:59 2008 -0700
14241 ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
14243 Signed-off-by: Adam Graham <agraham@amcc.com>
14244 Signed-off-by: Stefan Roese <sr@denx.de>
14246 commit 075d0b81e896e8735ae26372cd384f87cbd24e41
14247 Author: Adam Graham <agraham@amcc.com>
14248 Date: Wed Sep 3 12:26:28 2008 -0700
14250 ppc4xx: IBM Memory Controller DDR autocalibration routines
14252 Alternate SDRAM DDR autocalibration routine that can be generically used
14253 for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
14254 support of more DIMM/memory chip vendors and gets the DDR autocalibration
14255 values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
14257 Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
14258 "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
14259 of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
14260 lot longer to run than Method_B. Method_B executes in the same amount of time
14261 as the currently existing DDR autocalibration routine, i.e. 1 second or so.
14262 Normally Method_B is used and it is set as the default method.
14264 The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
14265 Controller registers.[bit-field]:
14266 1) SDRAM0_RQDC.[RQFD]
14267 2) SDRAM0_RFDC.[RFFD]
14269 This alternate PPC4xx DDR autocalibration code calibrates the following
14270 IBM SDRAM Controller registers.[bit-field]:
14272 1) SDRAM0_WRDTR.[WDTR]
14273 2) SDRAM0_CLKTR.[CKTR]
14274 3) SDRAM0_RQDC.[RQFD]
14275 4) SDRAM0_RFDC.[RFFD]
14277 and will also use the calibrated settings of the above four registers that
14278 produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
14279 register.[bit-field].
14281 Signed-off-by: Adam Graham <agraham@amcc.com>
14282 Signed-off-by: Stefan Roese <sr@denx.de>
14284 commit e07f4a8033b6270b8103049adb6456f660ff4a89
14285 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14286 Date: Mon Sep 1 13:09:39 2008 -0400
14288 ppc44x: Unification of virtex5 pp440 boards
14290 This patch provides an unificated way of handling xilinx v5 ppc440 boards.
14292 It unificates 3 different things:
14295 A new board called ppc440-generic has been created. This board includes
14296 a generic tlb initialization (Maps the whole memory into virtual) and
14297 defines board_pre_init, checkboard, initdram and get_sys_info weakly,
14298 so, they can be replaced by specific functions.
14300 If a new board needs to redefine any of the previous functions
14301 (specific initialization) it can create a new directory with the
14302 specific initializations needed. (see the example ml507 board).
14304 2) Configuration file
14305 Common configurations are located under configs/xilinx-ppc440.h, this
14306 header file interpretes the xparameters file generated by EDK and
14307 configurates u-boot in correspondence. Example: if there is a Temac,
14308 allows CMD_CONFIG_NET
14309 Specific configuration are located under specific configuration file.
14310 (see the example ml507 board)
14313 Some work has been done in order to not duplicate work in the Main
14314 Makefile. Please see the attached code.
14316 In order to support new boards they can be implemented in the next way:
14318 a) Simple Generic Board (90% of the time)
14319 Using EDK generates a new xparameters.h file, replace
14320 ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
14323 b) Simple Boards with special u-boot parameters (9 % of the time)
14324 Create a new file under configs for it (use ml507.h as example) and
14325 change your paramaters. Create a new Makefile paragraph and compile
14327 c) Complex boards (1% of the time)
14328 Create a new folder for the board, like the ml507
14330 Finally, it adds support for the Avnet FX30T Evaluation board, following
14331 the new generic structure:
14333 Cheap board by Avnet for evaluating the Virtex5 FX technology.
14335 This patch adds support for:
14340 Prior using U-boot in this board, read carefully the ERRATA by Avnet
14341 to solve some memory initialization issues.
14343 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14344 Signed-off-by: Stefan Roese <sr@denx.de>
14346 commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
14347 Author: Nick Spence <nick.spence@freescale.com>
14348 Date: Tue Sep 2 15:21:16 2008 -0500
14350 mpc83xx: fix mpc8313 in-tree building with NAND
14352 and add mpc8313 NAND build to MAKEALL
14354 Signed-off-by: Nick Spence <nick.spence@freescale.com>
14355 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14357 commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
14358 Author: Nick Spence <nick.spence@freescale.com>
14359 Date: Thu Aug 28 14:09:25 2008 -0700
14361 mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
14363 Cleans up some latent issues with the data cache control so that
14364 dcache_enable() and dcache_disable() will work reliably (after
14365 unlock_ram_in_cache() has been called)
14367 Signed-off-by: Nick Spence <nick.spence@freescale.com>
14368 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14370 commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
14371 Author: Nick Spence <nick.spence@freescale.com>
14372 Date: Thu Aug 28 14:09:19 2008 -0700
14374 mpc83xx: Store and display Arbiter Event Register values
14376 Record the Arbiter Event Register values and optionally display them.
14378 The Arbiter Event Register can record the type and effective address of
14379 an arbiter error, even through an HRESET. This patch stores the values in
14380 the global data structure.
14382 Display of the Arbiter Event registers immediately after the RSR value
14383 can be enabled with defines. The Arbiter values will only be displayed
14384 if an arbiter event has occured since the last Power On Reset, and either
14385 of the following defines exist:
14386 #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
14387 and type register values
14388 #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
14389 event register values
14391 Address Only transactions are one of the trapped events that can register
14392 as an arbiter event. They occur with some cache manipulation instructions
14393 if the HID0_ABE (Address Broadcast Enable) is set and the memory region
14394 has the MEMORY_COHERENCE WIMG bit set. Setting:
14395 #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
14396 only events, so that it can still capture
14397 other real problems.
14399 Signed-off-by: Nick Spence <nick.spence@freescale.com>
14400 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14402 commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
14403 Author: Nick Spence <nick.spence@freescale.com>
14404 Date: Thu Aug 28 14:09:11 2008 -0700
14406 mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
14408 This is needed in unlock_ram_in_cache() because it is called from C and
14409 will corrupt the small data area anchor that is kept in R2.
14411 lock_ram_in_cache() is modified similarly as good coding practice, but
14412 is not called from C.
14414 Signed-off-by: Nick Spence <nick.spence@freescale.com>
14415 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14417 commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
14418 Author: Nick Spence <nick.spence@freescale.com>
14419 Date: Fri Aug 22 23:52:50 2008 -0700
14421 MPC83XX: Fix GPIO configuration - set gpio level before direction
14423 Set DAT value before DIR values to avoid creating glitches on the
14426 Set gpio level register before direction register to inhibit
14427 glitches on high level output pins.
14429 Dir and data gets cleared at powerup, so high level output lines see
14430 a short low pulse between setting the direction and level registers.
14432 Issue was seen on a new board with the nReset line of the NOR flash
14433 connected to a GPIO. Setting the direction register puts the NOR flash
14434 in reset so the next instruction to set the level cannot get executed.
14436 Signed-off-by: Nick Spence <nick.spence@freescale.com>
14437 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
14438 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14440 commit 7007c5975ee900ad70983b0681d3251e221f8321
14441 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14442 Date: Tue Sep 2 02:58:32 2008 +0200
14444 doc/qemu_mips: add doc howto debug u-boot with gdb
14446 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14448 commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
14449 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14450 Date: Wed Sep 3 17:15:45 2008 +0200
14452 ppx4xx: Fix broken DASA_SIM board
14454 This patch adds initdram() to DASA_SIM boards that has been
14455 removed accidentally by a previous commit.
14457 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14458 Signed-off-by: Stefan Roese <sr@denx.de>
14460 commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
14461 Author: Stefan Roese <sr@denx.de>
14462 Date: Mon Sep 1 08:35:37 2008 +0200
14464 ppc4xx: Remove reference to common/lists.o from some esd linker scripts
14466 This patch removes some direct references to common/lists.o from some
14467 esd linker scripts. This is necessary because the lists source was moved
14468 and is not in the "common" directory anymore.
14470 Signed-off-by: Stefan Roese <sr@denx.de>
14472 commit 97b0734d65f8a0b03df0a335a2addc759da56107
14473 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14474 Date: Tue Sep 2 16:33:05 2008 +0200
14476 ppc4xx: Remove obsolete or unused functions from some esd boards
14478 This patch removes initdram() and testdram() from most esd 405 platforms.
14479 Some boards also have an empty dummy implementation of
14480 misc_init_f(). This is also removed.
14482 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14483 Signed-off-by: Stefan Roese <sr@denx.de>
14485 commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
14486 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14487 Date: Tue Sep 2 15:07:54 2008 +0200
14489 ppc4xx: Update VOM405 board configuration
14492 - add command line editing
14495 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14496 Signed-off-by: Stefan Roese <sr@denx.de>
14498 commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
14499 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14500 Date: Tue Sep 2 15:07:53 2008 +0200
14502 ppc4xx: Remove obsolete initdram() function from VOM405 board
14504 This patch removed the obsolete initdram() function from
14505 VOM405 platform file.
14507 Some minor cleanup.
14509 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14510 Signed-off-by: Stefan Roese <sr@denx.de>
14512 commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
14513 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14514 Date: Tue Sep 2 15:07:52 2008 +0200
14516 ppc4xx: Cleanup VOM405 linker script
14518 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14519 Signed-off-by: Stefan Roese <sr@denx.de>
14521 commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
14522 Author: Matthias Fuchs <mf@esd.eu>
14523 Date: Tue Sep 2 15:07:51 2008 +0200
14525 ppc4xx: Add fdt support for VOM405 boards
14527 Signed-off-by: Matthias Fuchs <mf@esd.eu>
14528 Signed-off-by: Stefan Roese <sr@denx.de>
14530 commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
14531 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14532 Date: Tue Sep 2 11:36:14 2008 +0200
14534 ppc4xx: Coding style cleanup
14536 Wrap long lines etc.
14538 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14539 Signed-off-by: Stefan Roese <sr@denx.de>
14541 commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
14542 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14543 Date: Tue Sep 2 11:35:56 2008 +0200
14545 ppc4xx: Enable USB on PLU405 boards
14547 This patch enables the PCI-OHCI controller on PLU405 board.
14549 Also the default CPU frequency is updated to 266 MHz and
14550 command line editing is enabled.
14552 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14553 Signed-off-by: Stefan Roese <sr@denx.de>
14555 commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
14556 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14557 Date: Tue Sep 2 11:35:35 2008 +0200
14559 ppc4xx: Cleanup PLU405 platform file
14562 - wraps some long lines
14563 - removes unused/obsolete functions: misc_init_f() and initdram()
14565 Signed-off-by: Matthias Fuchs <mf@esd.eu>
14566 Signed-off-by: Stefan Roese <sr@denx.de>
14568 commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
14569 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14570 Date: Tue Sep 2 11:35:04 2008 +0200
14572 ppc4xx: Cleanup PLU405 linker script
14574 Signed-off-by: Matthias Fuchs <mf@esd.eu>
14575 Signed-off-by: Stefan Roese <sr@denx.de>
14577 commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
14578 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14579 Date: Tue Sep 2 11:34:36 2008 +0200
14581 ppc4xx: Add fdt support for PLU405 boards
14583 Signed-off-by: Matthias Fuchs <mf@esd.eu>
14584 Signed-off-by: Stefan Roese <sr@denx.de>
14586 commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
14587 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14588 Date: Tue Sep 2 11:34:08 2008 +0200
14590 ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
14592 Signed-off-by: Matthias Fuchs <mf@esd.eu>
14593 Signed-off-by: Stefan Roese <sr@denx.de>
14595 commit be1b0d2777e179191a57b138b660547a17e55aad
14596 Author: Jochen Friedrich <jochen@scram.de>
14597 Date: Tue Sep 2 11:24:59 2008 +0200
14599 Don't tftp to unknown flash
14601 If a board has a variable number of flash banks, there are empty entries
14602 in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
14603 "Outside available Flash". This patch skips flash banks with unknown
14606 Signed-off-by: Jochen Friedrich <jochen@scram.de>
14607 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14609 commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
14610 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14611 Date: Thu Aug 28 13:40:44 2008 +0900
14613 net: smc911x: Add pkt_data_pull and pkt_data_push function
14615 The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
14616 Byte-swapping is necessary, and so poor performance is inevitable.
14617 This problem cannot evade by the swap function of CHIP, this can
14618 evade by software Byte-swapping.
14619 And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
14620 functions necessary to solve this problem.
14622 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14623 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14625 commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
14626 Author: Ben Warren <biggerbadderben@gmail.com>
14627 Date: Sun Aug 31 20:37:00 2008 -0700
14629 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
14660 Removed initialization of the driver from net/eth.c
14661 Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
14663 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14665 commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
14666 Author: Ben Warren <biggerbadderben@gmail.com>
14667 Date: Sun Aug 31 10:45:44 2008 -0700
14669 Moved initialization of TULIP Ethernet controller to board_eth_init()
14684 Removed initialization of the driver from net/eth.c
14686 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14688 commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
14689 Author: Ben Warren <biggerbadderben@gmail.com>
14690 Date: Sun Aug 31 10:44:19 2008 -0700
14692 Moved initialization of E1000 Ethernet controller to board_eth_init()
14699 Removed initialization of the driver from net/eth.c
14701 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14703 commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
14704 Author: Ben Warren <biggerbadderben@gmail.com>
14705 Date: Sun Aug 31 10:40:51 2008 -0700
14707 Moved initialization of plb2800 Ethernet driver to board_eth_init
14712 Removed initialization of controller from net/eth.c
14714 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14716 commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
14717 Author: Ben Warren <biggerbadderben@gmail.com>
14718 Date: Sun Aug 31 10:39:12 2008 -0700
14720 Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
14722 Modified board_eth_init() functions of boards that have this FEC in addition
14723 to other Ethernet controllers.
14734 Removed initialization of controller from net/eth.c
14736 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14738 commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
14739 Author: Ben Warren <biggerbadderben@gmail.com>
14740 Date: Sun Aug 31 10:36:38 2008 -0700
14742 Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
14744 Added a cpu_eth_init() function to MPC512x CPU directory and
14745 removed code from net/eth.c
14747 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14749 commit 8218bd2aa68820b878a8413493ae17fd8d21f944
14750 Author: Ben Warren <biggerbadderben@gmail.com>
14751 Date: Sun Aug 31 10:16:59 2008 -0700
14753 Moved initialization of IncaIP Ethernet controller to board_eth_init
14758 Removed initialization of the driver from net/eth.c
14760 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14762 commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
14763 Author: Ben Warren <biggerbadderben@gmail.com>
14764 Date: Sun Aug 31 10:15:26 2008 -0700
14766 Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
14771 Removed initialization of the driver from net/eth.c
14773 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14775 commit 6aca145e067efe75398e9fac97822bd3700de0b2
14776 Author: Ben Warren <biggerbadderben@gmail.com>
14777 Date: Sun Aug 31 10:13:34 2008 -0700
14779 Moved initialization of GT6426x Ethernet controller to board_eth_init()
14786 Removed initialization of the driver from net/eth.c
14788 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14790 commit e3090534d62045dcb73f5392bacc64a4e8e443dc
14791 Author: Ben Warren <biggerbadderben@gmail.com>
14792 Date: Sun Aug 31 10:08:43 2008 -0700
14794 Moved initialization of PCNET Ethernet controller to board_eth_init()
14800 Removed initialization of the driver from net/eth.c
14802 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14804 commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
14805 Author: Ben Warren <biggerbadderben@gmail.com>
14806 Date: Sun Aug 31 10:07:16 2008 -0700
14808 Moved initialization of NATSEMI Ethernet controller to board_eth_init()
14813 Removed initialization of the driver from net/eth.c
14815 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14817 commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
14818 Author: Ben Warren <biggerbadderben@gmail.com>
14819 Date: Sun Aug 31 10:03:22 2008 -0700
14821 Moved initialization of NS8382X Ethernet controller to board_eth_init()
14835 Removed initialization of the driver from net/eth.c
14837 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14839 commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
14840 Author: Ben Warren <biggerbadderben@gmail.com>
14841 Date: Sun Aug 31 09:59:33 2008 -0700
14843 Moved initialization of TSI108 Ethernet controller to board_eth_init()
14848 Removed initialization of the driver from net/eth.c
14850 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14852 commit 0b252f50ae218ae15bfb63af44227972686ebc56
14853 Author: Ben Warren <biggerbadderben@gmail.com>
14854 Date: Sun Aug 31 21:41:08 2008 -0700
14856 Moved initialization of RTL8139 Ethernet controller to board_eth_init()
14865 Removed initialization of the driver from net/eth.c
14867 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14869 commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
14870 Author: Ben Warren <biggerbadderben@gmail.com>
14871 Date: Sun Aug 31 09:49:42 2008 -0700
14873 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
14879 Removed initialization of the driver from net/eth.c
14881 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14883 commit 3ae071e44256144d6c1e3febb65f6c56bd433769
14884 Author: Ben Warren <biggerbadderben@gmail.com>
14885 Date: Tue Aug 12 22:11:53 2008 -0700
14887 Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
14889 Removed at91sam9_eth_initialize() from net/eth.c
14891 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14893 commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
14894 Author: Ben Warren <biggerbadderben@gmail.com>
14895 Date: Sun Aug 31 22:22:04 2008 -0700
14897 Introduce netdev.h header file and remove externs
14899 This addresses all drivers whose initializers have already
14900 been moved to board_eth_init()/cpu_eth_init().
14902 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14904 commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
14905 Author: Andy Fleming <afleming@freescale.com>
14906 Date: Sun Aug 31 16:33:30 2008 -0500
14908 Add pixis_set_sgmii command
14910 The 8544DS and 8572DS platforms support an optional SGMII riser card to
14911 expose ethernet over an SGMII interface. Once the card is in, it is also
14912 necessary to configure the board such that it uses the card, rather than
14913 the on-board ethernet ports. This can either be done by flipping dip switches
14914 on the motherboard, or by modifying registers in the pixis. Either way
14917 This adds a command to allow users to choose which ports are routed through
14918 the SGMII card, and which through the onboard ports. It also allows users
14919 to revert to the current switch settings.
14921 This code does not work on the 8572, as the PIXIS is different.
14923 Signed-off-by: Andy Fleming <afleming@freescale.com>
14924 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14926 commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
14927 Author: Andy Fleming <afleming@freescale.com>
14928 Date: Sun Aug 31 16:33:29 2008 -0500
14930 Add SGMII support for the 8544 DS
14932 The 8544 DS has an optional SGMII Riser card, which uses different PHY
14933 addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
14936 Signed-off-by: Andy Fleming <afleming@freescale.com>
14937 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14939 commit 652f7c2eef76a1340928bd660845441e932d86a2
14940 Author: Andy Fleming <afleming@freescale.com>
14941 Date: Sun Aug 31 16:33:28 2008 -0500
14943 Add support for Freescale SGMII Riser Card
14945 The 8544DS and 8572DS systems have an optional SGMII riser card which
14946 exposes new ethernet ports which are connected to the eTSECs via an
14947 SGMII interface. The SGMII PHYs for this board are offset from the standard
14948 PHY addresses, so this code modifies the passed in tsec_info structure to
14949 use the SGMII PHYs on the card, instead.
14951 Signed-off-by: Andy Fleming <afleming@freescale.com>
14952 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14954 commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
14955 Author: Andy Fleming <afleming@freescale.com>
14956 Date: Sun Aug 31 16:33:27 2008 -0500
14958 Add SGMII support to the tsec
14960 Adds support for configuring the TBI to talk properly with the SerDes.
14962 Signed-off-by: Andy Fleming <afleming@freescale.com>
14963 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14965 commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
14966 Author: Andy Fleming <afleming@freescale.com>
14967 Date: Sun Aug 31 16:33:26 2008 -0500
14969 Pass in tsec_info struct through tsec_initialize
14971 The tsec driver contains a hard-coded array of configuration information
14972 for the tsec ethernet controllers. We create a default function that works
14973 for most tsecs, and allow that to be overridden by board code. It creates
14974 an array of tsec_info structures, which are then parsed by the corresponding
14975 driver instance to determine configuration. Also, add regs, miiregs, and
14976 devname fields to the tsec_info structure, so that we don't need the kludgy
14979 Signed-off-by: Andy Fleming <afleming@freescale.com>
14980 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14982 commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
14983 Author: Andy Fleming <afleming@freescale.com>
14984 Date: Sun Aug 31 16:33:25 2008 -0500
14986 tsec: Move tsec.h to include/
14988 This is to prepare the way for board code passing in the tsec_info structure
14990 Signed-off-by: Andy Fleming <afleming@freescale.com>
14991 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14993 commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
14994 Author: Sergei Poselenov <sposelenov@emcraft.com>
14995 Date: Fri Jun 6 15:52:44 2008 +0200
14997 PHY: Add support for the M88E1121R Marvell chip.
14999 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
15000 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15001 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15003 commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
15004 Author: Wolfgang Denk <wd@denx.de>
15005 Date: Tue Sep 2 21:17:36 2008 +0200
15007 fw_env.c: fix build problems with MTD_VERSION=old
15009 (as needed to support old 2.4 Linux kernel based releases)
15011 Signed-off-by: Wolfgang Denk <wd@denx.de>
15013 commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
15014 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15015 Date: Mon Sep 1 17:11:26 2008 +0200
15017 device: make device_register() clone the device
15019 This is expected by the callers, but this fact was hidden well within
15020 the old list implementation.
15022 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15024 commit c75e772a2f061a508bba28ded1b5bea91f0442b0
15025 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15026 Date: Sun Aug 31 23:28:15 2008 +0900
15028 sh: Remove CC line from board's Makefile
15030 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15032 commit 468eae0660de6fdfd9999944c536ecc4797bd944
15033 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15034 Date: Sun Aug 31 23:25:57 2008 +0900
15036 sh: Replaced "@./mkconfig" for @$(MKCONFIG)
15038 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15040 commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
15041 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15042 Date: Thu Aug 28 14:50:52 2008 +0900
15044 sh: Add support sh2 to MAKEALL
15046 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15047 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15049 commit 6f3d8bb5faa12dbf3031382286784c978df038ee
15050 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15051 Date: Thu Aug 28 14:52:23 2008 +0900
15053 sh: Fix compile error rsk7203 board
15055 This boards used old type preprocessor.
15056 This patch fix compile error.
15058 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15059 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15061 commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
15062 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15063 Date: Thu Aug 28 14:53:31 2008 +0900
15065 sh: Fix compile error sh7785lcr board
15067 This boards used old type preprocessor.
15068 This patch fix compile error.
15070 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15071 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15073 commit 6f0da4972e48f99d37bc522814940a6022cd3084
15074 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15075 Date: Fri Aug 22 17:39:09 2008 +0900
15077 sh: Renesas Solutions AP325RXA board support
15079 AP325RXA is SH7723's reference board.
15080 This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
15081 In this patch, support SCIF, NOR Flash, and Ethernet.
15083 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15084 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15086 commit ab09f433b50bb83b5e440c335bc3839ee069e534
15087 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15088 Date: Fri Aug 22 17:48:51 2008 +0900
15090 sh: add support Renesas SH7723
15092 Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
15093 This patch supports CPU register's header file and SCIF serial driver.
15095 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15096 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15098 commit c655fad06ba3fb042dbc667724a40e1a9a091248
15099 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15100 Date: Sun Aug 31 23:02:04 2008 +0900
15102 sh: Renesas RSK+ 7203 board support
15104 This adds initial support for the RTE RSK+ SH7203 board.
15106 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15107 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15109 commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
15110 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15111 Date: Thu Jul 3 23:11:02 2008 +0900
15113 sh: Add support Renesas SH7203 processor
15115 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15116 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15118 commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
15119 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15120 Date: Sun Aug 31 22:48:33 2008 +0900
15122 sh: Add support SH2/SH2A which is CPU of Renesas Technology
15124 Add support SH2/SH2A basic function.
15126 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15127 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15129 commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
15130 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15131 Date: Sun Aug 31 22:45:08 2008 +0900
15133 sh: Renesas R0P7785LC0011RL board support
15135 This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
15136 Graphic, Ethernet, USB, SD, RTC, and I2C controller.
15138 This patch supports the following functions:
15139 - 128MB DDR2-SDRAM (29-bit address mode only)
15144 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
15145 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15147 commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
15148 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
15149 Date: Thu Jul 10 19:32:53 2008 +0900
15151 sh: add support for SH7785
15153 Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
15154 This patch supports CPU register's header file.
15156 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
15157 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15159 commit d6e04258be8f2408845468d3cf722a4cf0433445
15160 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15161 Date: Sun Aug 31 04:45:42 2008 +0200
15163 davinci: fix remaining dm644x_eth
15165 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15167 commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
15168 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15169 Date: Sun Aug 31 04:24:56 2008 +0200
15171 fs: Move conditional compilation to Makefile
15173 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15175 commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
15176 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15177 Date: Sun Aug 31 04:24:55 2008 +0200
15179 devices: merge to list_head
15181 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15183 commit ef0255fc75f28655f9681422079287d68a14dbaa
15184 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15185 Date: Sun Aug 31 04:24:51 2008 +0200
15189 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15191 commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
15192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15193 Date: Sun Aug 31 00:39:48 2008 +0200
15195 smdk6400: add gitignore
15197 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15199 commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
15200 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15201 Date: Sun Aug 31 00:39:48 2008 +0200
15203 smdk6400: Use CONFIG_FLASH_CFI_DRIVER
15205 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15207 commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
15208 Author: Guennadi Liakhovetski <lg@denx.de>
15209 Date: Sun Aug 31 00:39:47 2008 +0200
15211 smdk6400: remove redundant bootargs definition
15213 Double bootargs setting leads to a duplicated environmant entry.
15215 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15217 commit 11edcfe260f20dcea79284a3e95270989d433854
15218 Author: Guennadi Liakhovetski <lg@denx.de>
15219 Date: Sun Aug 31 00:39:47 2008 +0200
15221 ARM: Add support for S3C6400 based SMDK6400 board
15223 SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
15224 driver for it too. The board can also boot from the NOR flash, but due to
15225 hardware limitations it can only address 64KiB on it, which is not enough
15226 for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
15228 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15230 commit e0056b341069796eaea11eae0fc8eb93a3dceaac
15231 Author: Guennadi Liakhovetski <lg@denx.de>
15232 Date: Sun Aug 31 00:39:47 2008 +0200
15234 NAND: add NAND driver for S3C64XX
15236 Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
15238 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15240 commit 3fe7b589f9c7463df39056f8872006a67f56a91c
15241 Author: Guennadi Liakhovetski <lg@denx.de>
15242 Date: Sun Aug 31 00:39:47 2008 +0200
15244 S3C64XX: remove broken HWFLOW support from the serial driver
15246 As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
15247 broken and currently unused. Remove it.
15249 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15251 commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
15252 Author: Guennadi Liakhovetski <lg@denx.de>
15253 Date: Sun Aug 31 00:39:47 2008 +0200
15255 serial: add S3C64XX serial driver
15257 Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
15259 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15261 commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
15262 Author: Guennadi Liakhovetski <lg@denx.de>
15263 Date: Sun Aug 31 00:39:46 2008 +0200
15265 USB: Add support for OHCI controller on S3C6400
15267 Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
15268 try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
15269 it should work too and we could still profit from instruction cache.
15271 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15273 commit 9b07773f8883665b002500c190507e9fd99b7181
15274 Author: Guennadi Liakhovetski <lg@denx.de>
15275 Date: Sun Aug 31 00:39:46 2008 +0200
15277 ARM: Add arm1176 core with S3C6400 SoC
15279 Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
15281 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15283 commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
15284 Author: Sandeep Paulraj <s-paulraj@ti.com>
15285 Date: Sun Aug 31 00:39:46 2008 +0200
15287 ARM DaVinci: Changing function names for EMAC driver
15289 DM644x is just one of a series of DaVinci chips that use the EMAC driver.
15290 By replacing all the function names that start with dm644x_* to davinci_*
15291 we make these function more portable. I have tested this change on my EVM.
15292 DM6467 is another DaVinci SOC which uses the EMAC driver and i will
15293 be sending patches that add DaVinci DM6467 support to the list soon.
15295 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
15297 commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
15298 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
15299 Date: Sat Aug 30 23:21:30 2008 +0200
15301 Integrator[AP/CP] - Remove unused file memsetup.S
15303 - memsetup.s is changed/merged to lowlevel_init.S
15304 memsetup.S has a global label memsetup that just returns back to caller
15305 - memsetup global label is changed/merged to lowlevel_init
15306 This label is not called from anywhere.
15308 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
15310 commit 89d51d022a63be1a851eda983c8cbce1a044f65f
15311 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
15312 Date: Wed Aug 27 21:35:52 2008 +0200
15314 ARM DaVinci: Standardize names of directories/files
15316 ARM DaVinci: Standardize names of directories/files.
15318 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
15319 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15321 commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
15322 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
15323 Date: Fri Jul 11 15:10:13 2008 -0400
15325 ARM DaVinci: Move common functions to board/davinci/common
15327 ARM DaVinci: Move common functions to board/davinci/common.
15329 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
15331 commit c2b4b2e4814f4ace9015fdb64132894327400bf0
15332 Author: Stefan Roese <sr@denx.de>
15333 Date: Fri Aug 29 11:56:49 2008 +0200
15335 ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
15337 This function is needed for the new NAND infrastructure. We only need
15338 a dummy implementation though for the NDFC.
15340 Signed-off-by: Stefan Roese <sr@denx.de>
15342 commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
15343 Author: Stefan Roese <sr@denx.de>
15344 Date: Fri Aug 29 12:06:27 2008 +0200
15346 ppc4xx: Increase image size for NAND boot target
15348 This is needed since now with HUSH enabled (amcc-common.h) the image
15349 read from NAND exceeds the previous limit.
15351 Signed-off-by: Stefan Roese <sr@denx.de>
15353 commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
15354 Author: Ben Warren <biggerbadderben@gmail.com>
15355 Date: Thu Aug 28 23:58:30 2008 -0700
15357 Move MPC512x_FEC driver to drivers/net
15359 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15361 commit 80b00af01b3c9154774de2936f05a051e92f6a03
15362 Author: Ben Warren <biggerbadderben@gmail.com>
15363 Date: Thu Aug 28 23:58:29 2008 -0700
15365 Move MPC5xxx_FEC driver to drivers/net
15367 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15369 commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
15370 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15371 Date: Fri Aug 29 21:53:57 2008 +0200
15373 cmd_terminal: remove no need ifdef
15375 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15377 commit 578118bdf122877ae769776be002255be447b4fa
15378 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15379 Date: Fri Aug 29 21:53:57 2008 +0200
15381 common/Makefile: order by functionality
15383 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15385 commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
15386 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15387 Date: Fri Aug 29 21:53:56 2008 +0200
15389 miiphyutil: Move conditional compilation to Makefile
15391 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15393 commit 81789c39db3f0f6b621df8c0ec66014d701f368e
15394 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15395 Date: Fri Aug 29 21:53:37 2008 +0200
15397 autoscript: Move conditional compilation to Makefile
15399 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15401 commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
15402 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15403 Date: Fri Aug 29 01:18:11 2008 +0200
15405 crc16: move to lib_generic
15407 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15409 commit 55195773eacefb22dd483a3c560ea30a14263ce1
15410 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15411 Date: Fri Aug 29 01:18:01 2008 +0200
15413 miiphybb: move to drivers/net/phy
15415 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15417 commit e8314035996a9118ac5948df2ff8a2f2161ed67a
15418 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15419 Date: Thu Aug 28 12:31:51 2008 +0200
15421 soft_spi: move to drivers/spi
15423 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15425 commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
15426 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15427 Date: Thu Aug 28 12:31:51 2008 +0200
15429 soft_i2c: move to drivers/i2c
15431 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15433 commit 717a222229fdb77703e9174d0eb08a4b41febf49
15434 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15435 Date: Thu Aug 28 12:31:48 2008 +0200
15437 gunzip: move to lib_generic
15439 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15441 commit 52aef8f9ba28b747973bf76741c23db658d5773c
15442 Author: Wolfgang Ocker <weo@reccoware.de>
15443 Date: Tue Aug 26 19:55:23 2008 +0200
15445 ppc4xx: NAND configuration
15447 Made NAND bank configuration setting a config variable.
15449 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
15450 Signed-off-by: Stefan Roese <sr@denx.de>
15452 commit 5bc542a593abc9e974fbd34704af85c37c366c60
15453 Author: Victor Gallardo <vgallardo@amcc.com>
15454 Date: Thu Aug 28 16:03:28 2008 -0700
15456 ppc4xx: fix UIC external_interrupt hang on UIC0
15458 This patch fixes a UIC external_interrupt hang if critical or non-critical
15459 interrupt is set at the same time as a normal interrupt is set on UIC0.
15461 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
15462 Signed-off-by: Stefan Roese <sr@denx.de>
15464 commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
15465 Author: Prodyut Hazarika <phazarika@amcc.com>
15466 Date: Wed Aug 27 16:39:00 2008 -0700
15468 ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
15470 Removed Magic numbers from Initialization preload registers
15471 Tested with Kilauea, Glacier, Canyonlands and Katmai boards
15472 About 5-7% improvement seen for LMBench memtests
15474 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
15475 Signed-off-by: Stefan Roese <sr@denx.de>
15477 commit 8a490422bed685c9491274ec997f62061d88620b
15478 Author: John Rigby <jrigby@freescale.com>
15479 Date: Thu Aug 28 13:17:07 2008 -0600
15481 ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
15483 MPC5121 rev 2 silicon has a new register for controlling how long
15484 CS is asserted after deassertion of ALE in multiplexed mode.
15486 The default is to assert CS together with ALE. The alternative
15487 is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
15489 The default is wrong for the NOR flash and CPLD on the ADS5121.
15491 This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
15492 it does so conditionally based on silicon rev 2.0 or greater.
15494 Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
15495 Signed-off-by: John Rigby <jrigby@freescale.com>
15497 commit 5d9a5efa4b332f442b54a755d49969123c3a8742
15498 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15499 Date: Tue Aug 19 00:56:46 2008 +0600
15501 Add I2C frequency dividers for ColdFire
15503 The existing I2C freqency dividers for FDR does not apply
15504 to ColdFire platforms; thus, a seperate table is added
15505 based on MCF5xxx Reference Manual
15507 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
15508 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15509 Acked-by: Tabi Timur <timur@freescale.com>
15511 commit eec567a67e00d1ed8d941e9098b7d421f4091abf
15512 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15513 Date: Tue Aug 19 03:01:19 2008 +0600
15515 ColdFire: I2C fix for multiple platforms
15517 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15519 commit d53cf6a9c7423cba668b867978648645f71c3090
15520 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15521 Date: Tue Aug 19 00:37:13 2008 +0600
15523 ColdFire: Add CONFIG_MII_INIT for M5272C3
15525 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15527 commit f78ced3028d4130b24a318943a70cf5584ab16f4
15528 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15529 Date: Tue Aug 19 00:26:25 2008 +0600
15531 ColdFire: Multiple fixes for MCF5445x platforms
15533 Add FEC pin set and mii reset in __mii_init(). Change
15534 legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
15535 change cfi_offset to 0, and change CFG_FLASH_CFI to
15536 CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
15537 M54455EVB env settings in configuration file.
15539 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15541 commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
15542 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15543 Date: Fri Aug 15 18:24:25 2008 +0000
15545 ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
15547 The user manuals recommend 7.
15549 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
15550 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15552 commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
15553 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15554 Date: Fri Aug 15 16:50:07 2008 +0000
15556 ColdFire: Raise uart baudrate to 115200 bps
15558 M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
15559 uart baudrate increase from 19200 to 115200 bps
15561 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15563 commit ab6ba842682552ccf071d0034da0a20633d1d1ac
15564 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15565 Date: Wed Aug 13 12:07:03 2008 +0000
15567 ColdFire: Fix board.c warning message
15569 Implicit declaration of nand_init() warning message
15571 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15573 commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
15574 Author: Kumar Gala <galak@kernel.crashing.org>
15575 Date: Wed Aug 27 01:10:34 2008 -0500
15577 FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
15579 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15581 commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
15582 Author: Heiko Schocher <hs@denx.de>
15583 Date: Thu Aug 21 20:44:49 2008 +0200
15585 mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
15587 Signed-off-by: Heiko Schocher <hs@denx.de>
15589 commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
15590 Author: Kumar Gala <galak@kernel.crashing.org>
15591 Date: Tue Aug 19 14:46:36 2008 -0500
15593 mpc85xx: remove redudant code with lib_ppc/interrupts.c
15595 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
15596 not show how that happened, but there is no good reason for it.
15598 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
15601 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15603 commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
15604 Author: Kumar Gala <galak@kernel.crashing.org>
15605 Date: Fri Jul 25 13:31:05 2008 -0500
15607 mpc85xx: Add support for the MPC8536DS reference board
15609 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15610 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
15611 Signed-off-by: Dejan Minic <minic@freescale.com>
15612 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15613 Signed-off-by: Dave Liu <daveliu@freescale.com>
15614 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15616 commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
15617 Author: Kumar Gala <galak@kernel.crashing.org>
15618 Date: Tue Aug 12 11:14:19 2008 -0500
15620 mpc85xx: Add support for the MPC8536
15622 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
15623 also have SERDES init code for the 8536.
15625 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15626 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
15627 Signed-off-by: Dejan Minic <minic@freescale.com>
15628 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15629 Signed-off-by: Dave Liu <daveliu@freescale.com>
15631 commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
15632 Author: Kumar Gala <galak@kernel.crashing.org>
15633 Date: Tue Aug 12 11:13:08 2008 -0500
15635 mpc85xx: Add support for the MPC8572DS reference board
15637 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15639 commit 457caecdbca3df21a93abff19eab12dbc61b7897
15640 Author: Kumar Gala <galak@kernel.crashing.org>
15641 Date: Wed Aug 27 01:05:35 2008 -0500
15643 FSL DDR: Remove old SPD support from cpu/mpc85xx
15645 All 85xx boards have been converted to the new code so we can
15646 remove the old SPD DDR setup code.
15648 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15650 commit 0e7927db138976469e7257e29c1338050a50fcd9
15651 Author: Kumar Gala <galak@kernel.crashing.org>
15652 Date: Wed Aug 27 01:04:07 2008 -0500
15654 FSL DDR: Convert STXSSA to new DDR code.
15656 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15658 commit c360d9b970fbb9c13744c355879671165bbb9b9e
15659 Author: Kumar Gala <galak@kernel.crashing.org>
15660 Date: Wed Aug 27 01:03:42 2008 -0500
15662 FSL DDR: Convert STXGP3 to new DDR code.
15664 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15666 commit 8e55313b7ae12352a343f9b9962e662dbd897187
15667 Author: Kumar Gala <galak@kernel.crashing.org>
15668 Date: Tue Aug 26 23:52:58 2008 -0500
15670 FSL DDR: Convert SBC8560 to new DDR code.
15672 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15674 commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
15675 Author: Kumar Gala <galak@kernel.crashing.org>
15676 Date: Tue Aug 26 23:52:32 2008 -0500
15678 FSL DDR: Convert MPC8540EVAL to new DDR code.
15680 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15682 commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
15683 Author: Kumar Gala <galak@kernel.crashing.org>
15684 Date: Tue Aug 26 23:52:07 2008 -0500
15686 FSL DDR: Convert PM856 to new DDR code.
15688 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15690 commit d53bd3e17bd4f460257c19255569ea6dcfaae817
15691 Author: Kumar Gala <galak@kernel.crashing.org>
15692 Date: Tue Aug 26 23:51:49 2008 -0500
15694 FSL DDR: Convert PM854 to new DDR code.
15696 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15698 commit 33b9079ba20926f14238fff863b68a98e938948e
15699 Author: Kumar Gala <galak@kernel.crashing.org>
15700 Date: Tue Aug 26 23:15:28 2008 -0500
15702 FSL DDR: Convert sbc8548 to new DDR code.
15704 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15706 commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
15707 Author: Kumar Gala <galak@kernel.crashing.org>
15708 Date: Tue Aug 26 23:14:14 2008 -0500
15710 FSL DDR: Convert atum8548 to new DDR code.
15712 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15714 commit be0bd8234b9777ecd63c4c686f72af070d886517
15715 Author: Kumar Gala <galak@kernel.crashing.org>
15716 Date: Tue Aug 26 22:56:56 2008 -0500
15718 FSL DDR: Convert socrates to new DDR code.
15720 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15722 commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
15723 Author: Kumar Gala <galak@kernel.crashing.org>
15724 Date: Tue Aug 26 08:02:30 2008 -0500
15726 FSL DDR: Convert MPC8544DS to new DDR code.
15728 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15730 commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
15731 Author: Jon Loeliger <jdl@freescale.com>
15732 Date: Tue Mar 18 13:51:05 2008 -0500
15734 FSL DDR: Convert MPC8568MDS to new DDR code.
15736 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15737 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15739 commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
15740 Author: Jon Loeliger <jdl@freescale.com>
15741 Date: Tue Mar 18 13:51:06 2008 -0500
15743 FSL DDR: Convert MPC8548CDS to new DDR code.
15745 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15746 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15748 commit aa11d85cf318b961e029fe50d68ca47d004bce93
15749 Author: Jon Loeliger <jdl@freescale.com>
15750 Date: Mon Mar 17 15:48:18 2008 -0500
15752 FSL DDR: Convert MPC8541CDS to new DDR code.
15754 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15755 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15757 commit 2b40edb10d81da7bba724edbccd7f53777112579
15758 Author: Jon Loeliger <jdl@freescale.com>
15759 Date: Tue Mar 18 11:12:42 2008 -0500
15761 FSL DDR: Convert MPC8555ADS to new DDR code.
15763 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15764 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15766 commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
15767 Author: Jon Loeliger <jdl@freescale.com>
15768 Date: Tue Mar 18 11:12:44 2008 -0500
15770 FSL DDR: Convert MPC8560ADS to new DDR code.
15772 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15773 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15775 commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
15776 Author: Kumar Gala <galak@kernel.crashing.org>
15777 Date: Fri Jun 6 13:12:18 2008 -0500
15779 FSL DDR: Convert MPC8540ADS to new DDR code.
15781 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15783 commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
15784 Author: Kumar Gala <galak@kernel.crashing.org>
15785 Date: Tue Aug 26 21:34:55 2008 -0500
15787 FSL DDR: Add 85xx specific register setting
15789 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15791 commit 6fb1b7346849ccd0c20306143e334f5b76143070
15792 Author: Kumar Gala <galak@kernel.crashing.org>
15793 Date: Mon Jun 9 11:07:46 2008 -0500
15795 FSL DDR: Add e500 TLB helper for DDR code
15797 Provide a helper function that board code can call to map TLBs when
15800 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15802 commit d26b739afe5a6760bd345743188759cd9d0f3b47
15803 Author: Andrew Dyer <adyer@righthandtech.com>
15804 Date: Tue Aug 26 17:03:38 2008 -0500
15806 dm9000 remove dead external phy support, gpio fix
15808 dm9000 has code to detect and initialize external phy parts, but later
15809 on in the code the part is forced to use the internal phy
15810 unconditionally. Remove the unused/untested code.
15812 change the GPIO initialization so that only the GPIO used as an
15813 internal phy reset (hardwired in the chip) is set as an output. The
15814 remaining GPIO need to be handled by board specific code to prevent
15815 possible drive conflicts. Set as inputs for safety.
15817 replace a few magic numbers with defines
15819 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
15820 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15822 commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
15823 Author: Peter Tyser <ptyser@xes-inc.com>
15824 Date: Tue Aug 26 11:17:48 2008 -0500
15826 Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
15828 cmd_net.c command descriptions were updated to describe the optional
15829 hostIPaddr argument. The dhcp command help message was also updated
15830 to more closely reflect the other commands in cmd_net.c
15832 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
15833 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15835 commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
15836 Author: Remy Bohmer <linux@bohmer.net>
15837 Date: Wed Aug 20 11:30:28 2008 +0200
15839 Fix bogus error message in the DHCP handler
15841 The DHCP handler has 1 state that is not listed in this case, causing a
15842 failure message when there is actually no failure.
15844 Signed-off-by: Remy Bohmer <linux@bohmer.net>
15845 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15847 commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
15848 Author: Remy Bohmer <linux@bohmer.net>
15849 Date: Wed Aug 20 11:30:27 2008 +0200
15851 Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
15853 The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
15854 missing extern inside the net/bootp.h header
15856 Signed-off-by: Remy Bohmer <linux@bohmer.net>
15857 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15859 commit 1803f7f91ff35ca402259065df7557107dcf28a2
15860 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15861 Date: Tue Aug 19 21:26:32 2008 +0000
15863 ColdFire: Add FEC Buffer descriptors in SRAM
15865 Add FEC Buffer descriptors and data buffer in SRAM for
15866 faster execution and access.
15868 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15869 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15871 commit 429be27ce195210d4b9decf9e867b9ca6155a87d
15872 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15873 Date: Thu Aug 21 23:55:11 2008 +0000
15875 Fix ColdFire FEC warning messages
15877 Types mismatch and implicit declaration of icache_invalid()
15880 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15881 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15883 commit 6a002171098e968bd5b362347d2831224fab6048
15884 Author: Ben Warren <biggerbadderben@gmail.com>
15885 Date: Sat Jul 12 00:17:50 2008 -0700
15887 Moved initialization of SKGE Ethernet driver to board code.
15889 The only board using this driver is the SL8245 board.
15890 Removed initialization for the driver from net/eth.c
15892 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15894 commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
15895 Author: Ben Warren <biggerbadderben@gmail.com>
15896 Date: Sat Jul 12 00:08:45 2008 -0700
15898 Moved conditional compilation to Makefile for SK98 Ethernet driver
15900 Brute-force removal of #ifdefs. Didn't touch the code.
15901 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15903 commit 65d3d99c28dc363d15eaee78225ff643df499b97
15904 Author: Ben Warren <biggerbadderben@gmail.com>
15905 Date: Fri Jul 11 23:42:19 2008 -0700
15907 Moved initialization of ULI526X Ethernet driver to board code.
15909 The only board using this driver is the Freescale MPC8610HPCD board.
15910 Removed initialization for the driver from net/eth.c
15912 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15914 commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
15915 Author: Ben Warren <biggerbadderben@gmail.com>
15916 Date: Fri Jul 11 23:15:28 2008 -0700
15918 Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
15920 Added board_eth_init() function to bf537-stamp board.
15921 Removed initialization for the Blackin EMAC driver from net/eth.c
15923 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15925 commit fc363ce35408f348cacced68505f3747a53e3d7c
15926 Author: Ben Warren <biggerbadderben@gmail.com>
15927 Date: Wed Jul 9 01:04:19 2008 -0700
15929 Moved initialization of GRETH Ethernet driver to CPU directory
15931 Added a cpu_eth_init() function to leon2/leon3 CPU directories and
15932 removed code from net/eth.c
15934 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15936 commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
15937 Author: Ben Warren <biggerbadderben@gmail.com>
15938 Date: Tue Aug 26 22:16:25 2008 -0700
15940 Moved initialization of MCFFEC Ethernet driver to CPU directory
15942 Added a cpu_eth_init() function to coldfire CPU directories and
15943 removed code from net/eth.c
15945 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15947 commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
15948 Author: Ben Warren <biggerbadderben@gmail.com>
15949 Date: Tue Aug 26 22:12:36 2008 -0700
15951 Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
15953 Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
15954 removed code from net/eth.c
15956 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15958 commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
15959 Author: Kumar Gala <galak@kernel.crashing.org>
15960 Date: Tue Aug 26 15:01:38 2008 -0500
15962 FSL DDR: Remove old SPD support from cpu/mpc86xx
15964 All 86xx boards have been converted to the new code so we can
15965 remove the old SPD DDR setup code.
15967 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15969 commit 9bd4e5911b750837515466bc7449087698b88e0e
15970 Author: Kumar Gala <galak@kernel.crashing.org>
15971 Date: Tue Aug 26 15:01:37 2008 -0500
15973 FSL DDR: Convert SBC8641D to new DDR code.
15975 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15977 commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
15978 Author: Jon Loeliger <jdl@freescale.com>
15979 Date: Tue Aug 26 15:01:36 2008 -0500
15981 FSL DDR: Convert MPC8610HPCD to new DDR code.
15983 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15984 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15986 commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
15987 Author: Kumar Gala <galak@kernel.crashing.org>
15988 Date: Tue Aug 26 15:01:35 2008 -0500
15990 FSL DDR: Convert MPC8641HPCN to new DDR code.
15992 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15993 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15995 commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
15996 Author: Kumar Gala <galak@kernel.crashing.org>
15997 Date: Tue Aug 26 15:01:34 2008 -0500
15999 FSL DDR: Add 86xx specific register setting
16001 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16003 commit 233fdd502a6c227f476212b3097653ad48d7e254
16004 Author: Kumar Gala <galak@kernel.crashing.org>
16005 Date: Tue Aug 26 15:01:32 2008 -0500
16007 FSL DDR: Add DDR2 DIMM paramter support
16009 Compute DIMM parameters based upon the SPD information.
16011 Signed-off-by: James Yang <James.Yang@freescale.com>
16012 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16013 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16015 commit 05c05a2363a6ac11e0e405926034546ffad71fad
16016 Author: Kumar Gala <galak@kernel.crashing.org>
16017 Date: Tue Aug 26 15:01:30 2008 -0500
16019 FSL DDR: Add DDR1 DIMM paramter support
16021 Compute DIMM parameters based upon the SPD information in spd.
16023 Signed-off-by: James Yang <James.Yang@freescale.com>
16024 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16025 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16027 commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
16028 Author: Kumar Gala <galak@kernel.crashing.org>
16029 Date: Tue Aug 26 15:01:29 2008 -0500
16031 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
16033 The main purpose of this rewrite it to be able to share the same
16034 initialization code on all FSL PowerPC products that have DDR
16035 controllers. (83xx, 85xx, 86xx).
16037 The code is broken up into the following steps:
16040 COMPUTE_COMMON_PARMS
16046 This allows us to share more code an easily allow for board specific code
16049 Additionally this code base adds support for >4G of DDR and provides a
16050 foundation for supporting interleaving on processors with more than one
16053 Signed-off-by: James Yang <James.Yang@freescale.com>
16054 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16055 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
16056 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16057 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16059 commit f784e32b4bce0013983506b11af4b85b8ca3d36e
16060 Author: Kumar Gala <galak@kernel.crashing.org>
16061 Date: Tue Aug 26 15:01:28 2008 -0500
16063 FSL DDR: Provide a generic set_ddr_laws()
16065 Provide a helper function that will setup the last available
16066 LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
16068 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16070 commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
16071 Author: James Yang <James.Yang@freescale.com>
16072 Date: Tue Aug 26 15:01:27 2008 -0500
16074 Add proper SPD definitions for DDR1/2/3
16076 Also adds helper functions for DDR1/2 to verify the checksum.
16078 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16080 commit 285db74716c724ae8a0ff177878fd09a74428c7b
16081 Author: Wolfgang Denk <wd@denx.de>
16082 Date: Wed Aug 27 01:02:48 2008 +0200
16086 Signed-off-by: Wolfgang Denk <wd@denx.de>
16088 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
16089 Author: Heiko Schocher <hs@denx.de>
16090 Date: Tue Aug 19 10:08:49 2008 +0200
16092 Add support for muas3001 board (MPC8270)
16094 Signed-off-by: Heiko Schocher <hs@denx.de>
16096 commit 322098bff32410d2a00031649b47c4ec90a66d9a
16097 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
16098 Date: Tue Aug 19 08:31:18 2008 +0530
16100 common/cmd_load.c cleanup - remove unused variables
16102 - Remove unused global variable os_data_count.
16103 - Remove unused variable z.
16105 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
16107 commit 306620b762a4f9fa6678568ad2e8772dec145208
16108 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16109 Date: Mon Aug 18 13:35:27 2008 +0200
16113 MVS1 board has reached end-of-life and can be removed completely.
16115 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16117 commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
16118 Author: Kumar Gala <galak@kernel.crashing.org>
16119 Date: Fri Aug 15 08:24:45 2008 -0500
16121 bootm: refactor do_reset and os boot function args
16123 There is no need for each OS specific function to call do_reset() we
16124 can just do it once in bootm. This means its feasible on an error for
16125 the OS boot function to return.
16127 Also, remove passing in cmd_tbl_t as its not needed by the OS boot
16128 functions. flag isn't currently used but might be in the future so
16131 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16133 commit 40afac22a9c602e55c501c800f1c064324711b56
16134 Author: Kumar Gala <galak@kernel.crashing.org>
16135 Date: Fri Aug 15 08:24:44 2008 -0500
16137 fdt: Added resize command
16139 Resize the fdt to size + padding to 4k boundary
16141 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16143 commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
16144 Author: Kumar Gala <galak@kernel.crashing.org>
16145 Date: Fri Aug 15 08:24:43 2008 -0500
16147 fdt: refactor initrd related code
16149 Created a new fdt_initrd() to deal with setting the initrd properties
16150 in the device tree and fixing up the mem reserve. We can use this
16151 both in the choosen node handling and lets us remove some duplicated
16152 code when we fixup the initrd info in bootm on PPC.
16154 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16156 commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
16157 Author: Kumar Gala <galak@kernel.crashing.org>
16158 Date: Fri Aug 15 08:24:42 2008 -0500
16160 fdt: refactor fdt resize code
16162 Move the fdt resizing code out of ppc specific boot code and into
16163 common fdt support code.
16165 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16167 commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
16168 Author: Kumar Gala <galak@kernel.crashing.org>
16169 Date: Fri Aug 15 08:24:41 2008 -0500
16171 bootm: refactor image detection and os load steps
16173 Created a bootm_start() that handles the parsing and detection of all
16174 the images that will be used by the bootm command (OS, ramdisk, fdt).
16175 As part of this we now tract all the relevant image offsets in the
16176 bootm_headers_t struct. This will allow us to have all the needed
16177 state for future sub-commands and lets us reduce a bit of arch
16178 specific code on SPARC.
16180 Created a bootm_load_os() that deals with decompression and loading
16183 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16185 commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
16186 Author: Kumar Gala <galak@kernel.crashing.org>
16187 Date: Fri Aug 15 08:24:40 2008 -0500
16189 bootm: move lmb into the bootm_headers_t structure
16191 To allow for persistent state between future bootm subcommands we
16192 need the lmb to exist in a global state.
16193 Moving it into the bootm_headers_t allows us to do that.
16195 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16197 commit 54f9c86691309b2f919f567f9255b8bcad2c7651
16198 Author: Kumar Gala <galak@kernel.crashing.org>
16199 Date: Fri Aug 15 08:24:39 2008 -0500
16201 bootm: Set working fdt address as part of the bootm flow
16203 Set the fdt working address so "fdt FOO" commands can be used as part
16204 of the bootm flow. Also set an the environment variable "fdtaddr"
16207 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16209 commit 06a09918f3903450313e2047a9cc258bf5872f46
16210 Author: Kumar Gala <galak@kernel.crashing.org>
16211 Date: Fri Aug 15 08:24:38 2008 -0500
16213 bootm: refactor fdt locating and relocation code
16215 Move the code that handles finding a device tree blob and relocating
16216 it (if needed) into common code so all arch's have access to it.
16218 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16220 commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
16221 Author: Kumar Gala <galak@kernel.crashing.org>
16222 Date: Fri Aug 15 08:24:37 2008 -0500
16224 bootm: refactor ramdisk locating code
16226 Move determing if we have a ramdisk and where its located into the
16227 common code. Keep track of the ramdisk start and end in the
16228 bootm_headers_t image struct.
16230 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16232 commit c160a9544743e80e8889edb2275538e7764ce334
16233 Author: Kumar Gala <galak@kernel.crashing.org>
16234 Date: Fri Aug 15 08:24:36 2008 -0500
16236 bootm: refactor entry point code
16238 Move entry point code out of each arch and into common code.
16239 Keep the entry point in the bootm_headers_t images struct.
16241 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16243 commit 20220d22b9f41446288588cd2e457e0077a18bed
16244 Author: Randy Vinson <rvinson@mvista.com>
16245 Date: Wed Aug 13 11:44:57 2008 -0700
16247 mpc7448hpc2: Fix PCI I/O space mapping.
16249 PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
16250 PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
16251 space such that 0xFA000000 in the processor's address space maps to 0
16252 on the PCI I/O bus.
16254 Signed-off-by Randy Vinson <rvinson@mvista.com>
16255 Acked-by: Roy Zang <tie-fei.zang@freescale.com>
16257 commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
16258 Author: Guennadi Liakhovetski <lg@denx.de>
16259 Date: Wed Aug 13 18:10:26 2008 +0200
16261 i.MX31: Specify maintainers for i.MX31-based boards
16263 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16264 Signed-off-by: Wolfgang Denk <wd@denx.de>
16266 commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
16267 Author: Wolfgang Denk <wd@denx.de>
16268 Date: Tue Aug 26 15:01:28 2008 +0200
16270 ADS5121: adjust image addresses in RAM and flash
16272 Use the same mapping in flash as used by Linux
16274 Signed-off-by: Wolfgang Denk <wd@denx.de>
16276 commit 19f101412c16edee9fd55db4039e1d68a833b28b
16277 Author: Wolfgang Denk <wd@denx.de>
16278 Date: Tue Aug 26 13:14:34 2008 +0200
16280 cmd_mem.c: Fix help message alignment
16282 Bug was introced by "Big white-space cleanup" (53677ef1)
16284 Signed-off-by: Wolfgang Denk <wd@denx.de>
16286 commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
16287 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16288 Date: Wed Aug 20 11:11:52 2008 +0200
16290 change mvBL-M7 default env and move to vendor subdir
16292 fix mvBL-M7 config and move to matrix_vision subdir
16294 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16295 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16297 commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
16298 Author: Nick Spence <nick.spence@freescale.com>
16299 Date: Fri Aug 22 23:52:40 2008 -0700
16301 MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
16303 This patch adds elements to the 83xx sysconf structure and #define values that are used
16304 by mpc83xx family devices.
16306 Signed-off-by: Nick Spence <nick.spence@freescale.com>
16307 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16309 commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
16310 Author: Ira W. Snyder <iws@ovro.caltech.edu>
16311 Date: Fri Aug 22 11:00:15 2008 -0700
16313 MPC8349EMDS: Add PCI Agent (PCISLAVE) support
16315 Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
16316 PCI card rather than a host computer.
16318 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
16319 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16321 commit 4ff9aea9d6b5602683a920951ef896996438af62
16322 Author: Ira W. Snyder <iws@ovro.caltech.edu>
16323 Date: Fri Aug 22 11:00:14 2008 -0700
16325 mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
16327 This adds a helper function to unlock the PCI configuration bit, so that
16328 any extra PCI setup (such as outbound windows, etc.) can be done after
16329 using the 83XX_GENERIC_PCI code to set up the PCI bus.
16331 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
16332 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16334 commit 162338e1fcde231ca4d562e5ebd7859456731691
16335 Author: Ira W. Snyder <iws@ovro.caltech.edu>
16336 Date: Fri Aug 22 11:00:13 2008 -0700
16338 MPC8349EMDS: use 83XX_GENERIC_PCI setup code
16340 Change the MPC8349EMDS board to use the generic PCI initialization code
16341 for the mpc83xx cpu.
16343 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
16344 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16346 commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
16347 Author: Kim Phillips <kim.phillips@freescale.com>
16348 Date: Mon Aug 25 14:53:09 2008 -0500
16350 fix out of tree building
16352 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16354 commit a49d10cf027d059ee15c262010a05cdaec0961e1
16355 Author: Wolfgang Denk <wd@denx.de>
16356 Date: Mon Aug 25 23:45:41 2008 +0200
16358 Minor coding style cleanup, updte CHANGELOG
16360 Signed-off-by: Wolfgang Denk <wd@denx.de>
16362 commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
16363 Author: Stefan Roese <sr@denx.de>
16364 Date: Wed Aug 20 20:29:38 2008 +0200
16366 RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
16368 This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
16369 to combine both config options into one line. This even allows defining
16370 both options and not generating the target object twice.
16372 Signed-off-by: Stefan Roese <sr@denx.de>
16374 commit 079edb913dbae147b50a488cf02e03f473fc5f28
16375 Author: Jens Gehrlein <sew_s@tqs.de>
16376 Date: Fri Jul 4 16:50:05 2008 +0200
16378 MX31: fix bit masks in function mx31_decode_pll()
16380 Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
16382 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
16384 commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
16385 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
16386 Date: Mon Aug 25 11:11:34 2008 +0200
16388 Correct ARM Versatile Timer Initialization
16390 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
16391 -- Timer Value Register @ TIMER Base + 4 is Read-only.
16392 -- Prescale Value (Bits 3-2 of TIMER Control register)
16393 can only be one of 00,01,10. 11 is undefined.
16394 -- CFG_HZ for Versatile board is set to
16395 #define CFG_HZ (1000000 / 256)
16396 So Prescale bits is set to indicate
16397 - 8 Stages of Prescale, Clock divided by 256
16398 - The Timer Control Register has one Undefined/Shouldn't Use Bit
16399 So we should do read/modify/write Operation
16401 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
16403 commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
16404 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
16405 Date: Mon Aug 25 11:30:29 2008 +0200
16407 Add ARM AMBA PL031 RTC Support
16409 Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
16411 commit e39411674669cc880e1ec4a8ca4794fb15c33a45
16412 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16413 Date: Tue Aug 19 16:21:03 2008 -0400
16415 ARM DaVinci: Removed redundant NAND initialization code.
16417 ARM DaVinci: Removed redundant NAND initialization code.
16419 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16421 commit b3fb663b20d995ca41327db877ddb168279b3f62
16422 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16423 Date: Tue Aug 19 16:21:00 2008 -0400
16425 ARM DaVinci: Fix compilation error with new MTD code.
16427 ARM DaVinci: Fix compilation error with new MTD code.
16429 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16431 commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
16432 Author: Gerald Van Baren <vanbaren@cideas.com>
16433 Date: Fri Aug 22 14:37:05 2008 -0400
16435 Add note on dereferencing /aliases pointers
16437 Replace the "must quote special characters" note with a hint on
16438 how to dereference /aliases pointers by omitting the leading "/".
16439 This feature was introduced by Kumar Gala as a libfdt enhancement
16440 in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
16444 => fdt print /aliases
16446 ethernet0 = "/qe@e0100000/ucc@2000";
16447 ethernet1 = "/qe@e0100000/ucc@3000";
16448 serial0 = "/soc8360@e0000000/serial@4500";
16449 serial1 = "/soc8360@e0000000/serial@4600";
16450 pci0 = "/pci@e0008500";
16452 => fdt print ethernet0
16454 device_type = "network";
16455 compatible = "ucc_geth";
16456 cell-index = <0x1>;
16457 reg = <0x2000 0x200>;
16458 interrupts = <0x20>;
16459 interrupt-parent = <0x2>;
16460 local-mac-address = [00 00 00 00 00 00];
16461 rx-clock-name = "none";
16462 tx-clock-name = "clk9";
16463 phy-handle = <0x3>;
16464 phy-connection-type = "rgmii-id";
16465 pio-handle = <0x4>;
16468 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
16470 commit feeca3f578b7f53c032ba203698751c982f8bf5a
16471 Author: Kumar Gala <galak@kernel.crashing.org>
16472 Date: Thu Aug 14 08:28:19 2008 -0500
16474 libfdt: Add support for using aliases in fdt_path_offset()
16476 If the path doesn't start with '/' check to see if it matches some alias
16477 under "/aliases" and substitute the matching alias value in the path
16478 and retry the lookup.
16480 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16481 Acked-by: David Gibson <david@gibson.dropbear.id.au>
16482 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
16484 commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
16485 Author: David Gibson <david@gibson.dropbear.id.au>
16486 Date: Wed Aug 6 14:50:49 2008 +1000
16488 libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
16490 As well as fdt_subnode_offset(), libfdt includes an
16491 fdt_subnode_offset_namelen() function that takes the subnode name to
16492 look up not as a NUL-terminated string, but as a string with an
16493 explicit length. This can be useful when the caller has the name as
16494 part of a longer string, such as a full path.
16496 However, we don't have corresponding 'namelen' versions for
16497 fdt_get_property() and fdt_getprop(). There are less obvious use
16498 cases for these variants on property names, but there are
16499 circumstances where they can be useful e.g. looking up property names
16500 which need to be parsed from a longer string buffer such as user input
16501 or a configuration file, or looking up an alias in a path with
16502 IEEE1275 style aliases.
16504 So, since it's very easy to implement such variants, this patch does
16505 so. The original NUL-terminated variants are, of course, implemented
16506 in terms of the namelen versions.
16508 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16510 commit f171746f701ea58bf6a53e835b53d2aaebee0d81
16511 Author: David Gibson <david@gibson.dropbear.id.au>
16512 Date: Tue Jul 29 14:51:22 2008 +1000
16514 libfdt: Forgot one function when cleaning the namespace
16516 In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
16517 libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
16518 chance of collisions with things from whatever package libfdt is
16519 embedded in, pulled into the libfdt build via that environment's
16522 Except... I missed one. This patch applies the same treatment to
16523 _stringlist_contains(). While we're at it, also make it static since
16524 it's only used in the same file.
16526 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16528 commit 46390da15411351fc3b498bd8c1615f78fe80df0
16529 Author: Wolfram Sang <w.sang@pengutronix.de>
16530 Date: Wed Jul 9 11:22:44 2008 +0200
16532 libfdt: Improve documentation in libfdt.h
16534 Fix a few typos and mistakes.
16536 Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
16537 Acked-by: David Gibson <david@gibson.dropbear.id.au>
16539 commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
16540 Author: David Gibson <david@gibson.dropbear.id.au>
16541 Date: Wed Jul 9 14:10:24 2008 +1000
16543 libfdt: Increase namespace-pollution paranoia
16545 libfdt is supposed to easy to embed in projects all and sundry.
16546 Often, it won't be practical to separate the embedded libfdt's
16547 namespace from that of the surrounding project. Which means there can
16548 be namespace conflicts between even libfdt's internal/static functions
16549 and functions or macros coming from the surrounding project's headers
16552 This patch, therefore, renames a bunch of libfdt internal functions
16553 and macros and makes a few other chances to reduce the chances of
16554 namespace collisions with embedding projects. Specifically:
16555 - Internal functions (even static ones) are now named _fdt_*()
16557 - The type and (static) global for the error table in
16558 fdt_strerror() gain an fdt_ prefix
16560 - The unused macro PALIGN is removed
16562 - The memeq and streq macros are removed and open-coded in the
16563 users (they were only used once each)
16565 - Other macros gain an FDT_ prefix
16567 - To save some of the bulk from the previous change, an
16568 FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
16569 FDT_ALIGN(x, FDT_TAGSIZE)
16571 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16573 commit c66830263af19831f2b7db307f79d1943febf7f9
16574 Author: David Gibson <david@gibson.dropbear.id.au>
16575 Date: Mon Jul 7 10:14:15 2008 +1000
16577 dtc: Enable and fix -Wcast-qual warnings
16579 Enabling -Wcast-qual warnings in dtc shows up a number of places where
16580 we are incorrectly discarding a const qualification. There are also
16581 some places where we are intentionally discarding the 'const', and we
16582 need an ugly cast through uintptr_t to suppress the warning. However,
16583 most of these are pretty well isolated with the *_w() functions. So
16584 in the interests of maximum safety with const qualifications, this
16585 patch enables the warnings and fixes the existing complaints.
16587 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16588 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
16590 commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
16591 Author: David Gibson <david@gibson.dropbear.id.au>
16592 Date: Mon Jul 7 10:10:48 2008 +1000
16594 dtc: Enable and fix -Wpointer-arith warnings
16596 This patch turns on the -Wpointer-arith option in the dtc Makefile,
16597 and fixes the resulting warnings due to using (void *) in pointer
16598 arithmetic. While convenient, pointer arithmetic on void * is not
16599 portable, so it's better that we avoid it, particularly in libfdt.
16601 Also add necessary definition of uintptr_t needed by David Gibson's
16602 changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
16603 comes from stdint.h, which u-boot doesn't have). -- gvb
16605 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16606 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
16608 commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
16609 Author: Tirumala R Marri <tmarri@amcc.com>
16610 Date: Thu Aug 21 21:54:53 2008 -0700
16612 ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
16614 During recent PCI-E tests it has been found that current
16615 driverl level and de-emphasis values are not set correctly.
16616 After sweeping throgh all de-ephasis values, it was found that
16617 0x130 is a right value. Where 0x13 is driver level and 0 is
16620 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
16621 Signed-off-by: Stefan Roese <sr@denx.de>
16623 commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
16624 Author: Remy Bohmer <linux@bohmer.net>
16625 Date: Wed Aug 20 20:46:56 2008 +0200
16627 Make the YAFFS filesystem work
16629 Recently the YAFFS filesystem support has been added to U-boot.
16630 However, just enabling CONFIG_YAFFS2 is not enough to get it working.
16632 ymount will generate an exception (when dereferencing mtd->readoob()), because
16633 the genericDevice is a null pointer. Further, a lot of logging is produced
16634 while using YAFFS fs, so logging should also be disabled.
16635 Both issues are solved by this patch.
16637 With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
16638 in U-boot, as well as in Linux.
16640 Tested on a Atmel AT91SAM9261EK board.
16642 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16643 Acked-by: William Juul <william.juul@tandberg.com>
16644 Signed-off-by: Scott Wood <scottwood@freescale.com>
16646 commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
16647 Author: Kyungmin Park <kmpark@infradead.org>
16648 Date: Tue Aug 19 08:42:53 2008 +0900
16650 Fix OneNAND read_oob/write_oob functions compatability
16652 Also sync with kernel OneNAND codes
16654 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
16655 Signed-off-by: Scott Wood <scottwood@freescale.com>
16657 commit 8d765456c1d33f2010d2717ee58de7647fdc6346
16658 Author: Scott Wood <scottwood@freescale.com>
16659 Date: Mon Aug 18 17:11:20 2008 -0500
16661 NAND: Remove delay from nand_boot_fsl_elbc.c.
16663 It was for debugging purposes, and shouldn't have been left in.
16665 Signed-off-by: Scott Wood <scottwood@freescale.com>
16667 commit f556483734126793522fb7a8cf36af90da78f084
16668 Author: Stefan Roese <sr@denx.de>
16669 Date: Thu Aug 21 11:05:03 2008 +0200
16671 ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
16673 This patch fixes some minor issues introduced with the patch:
16674 ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
16676 - Rework memory-queue and PLB arbiter optimization code, that the
16677 local variable is not needed anymore. This removes one #ifdef.
16678 - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
16679 of XXX+ 0x01). This was not introduced by Prodyut, just a
16680 copy-paste problem.
16682 Signed-off-by: Stefan Roese <sr@denx.de>
16684 commit 079589bcfb24ba11068460276a3cc9549ab5346f
16685 Author: Prodyut Hazarika <phazarika@amcc.com>
16686 Date: Wed Aug 20 09:38:51 2008 -0700
16688 ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
16689 PPC405EX and PPC460EX/GT/SX
16691 - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
16693 - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
16694 across processors (405 and 440/460)
16695 - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
16697 - Add register bit definitions for Memory Queue Configuration registers
16699 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
16700 Signed-off-by: Stefan Roese <sr@denx.de>
16702 commit ba37aa03287c5483c61c0a3e320c8888bee0143a
16703 Author: Kumar Gala <galak@kernel.crashing.org>
16704 Date: Tue Aug 19 15:41:18 2008 -0500
16706 fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
16708 Move to using the environment variables 'ethaddr', 'eth1addr', etc..
16709 instead of bd->bi_enetaddr, bi_enet1addr, etc.
16711 This makes the code a bit more flexible to the number of ethernet
16714 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16716 commit 4cacf7c64609839f809e2f9c45873f1d65861703
16717 Author: Stefan Roese <sr@denx.de>
16718 Date: Tue Aug 19 14:57:55 2008 +0200
16720 hush: Fix printf debug macro in hush.c so that it usable in U-Boot
16722 This patch changes the debug_printf() marco for U-Boot in hush.c and
16723 moves the definition of DEBUG_SHELL to a place that is actually compiled
16726 Signed-off-by: Stefan Roese <sr@denx.de>
16728 commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
16729 Author: Heiko Schocher <hs@denx.de>
16730 Date: Tue Aug 19 09:57:41 2008 +0200
16732 cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
16734 Commit 00b1883a4cac59d97cd297b1a3a398db85982865
16735 missed a few boards:
16736 include/configs/M5253DEMO.h
16737 include/configs/ml507.h
16738 include/configs/redwood.h
16740 This patch fixes this.
16742 Signed-off-by: Heiko Schocher <hs@denx.de>
16744 commit 0768b7a872964085eece8d5e9fec9175e9deb161
16745 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16746 Date: Mon Aug 18 13:41:27 2008 +0200
16748 Consolidate strmhz() implementation
16750 ARM, i386, m68k and ppc all have identical implementations of strmhz().
16751 Other architectures don't provide this function at all.
16753 This patch moves strmhz() into lib_generic, reducing code duplication
16754 and providing a more unified API across architectures.
16756 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16758 commit a928d0df211f1d829308d335d19be3ca42558dfc
16759 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16760 Date: Mon Aug 18 12:02:51 2008 +0200
16762 fix mvbc_p board build warnings
16764 fix build warnings @ mvBC-P board by using correct types, i.e. change
16765 out_be32 to out_be16 and out_8 accordingly.
16767 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16769 commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
16770 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16771 Date: Sat Aug 16 18:54:27 2008 +0200
16773 Makefile: fix posix support on find
16775 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16777 commit bef92e215d945cc574399c1a1b00a3a76d35aa03
16778 Author: Axel Beierlein <belatronix@web.de>
16779 Date: Sat Aug 16 00:30:48 2008 +0200
16781 Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
16783 Tested with TQM5200S on STK52XX.200 Board
16785 Signed-off-by: Axel Beierlein <belatronix@web.de>
16787 commit 0800707b6d5041a840a65d556032c15c584b55f8
16788 Author: Peter Tyser <ptyser@xes-inc.com>
16789 Date: Fri Aug 15 14:36:32 2008 -0500
16791 mod_i2c_mem() bugfix
16793 The last used chip, address, and address length were not being
16794 stored for the imm and imn commands.
16796 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16798 commit 4afbef967275b2f636abae86f91b81becee7ad03
16799 Author: Steven A. Falco <sfalco@harris.com>
16800 Date: Fri Aug 15 15:37:31 2008 -0400
16802 Fix typo in spelling of ATAPI.
16804 Correct a small spelling mistake.
16806 Signed-off-by: Steven A. Falco <sfalco@harris.com>
16808 commit 36c2d3062ecc6ab85f8e237180eb134464c48418
16809 Author: Steven A. Falco <sfalco@harris.com>
16810 Date: Fri Aug 15 15:34:10 2008 -0400
16812 Add a hook to allow board-specific PIO mode setting.
16814 This patch adds a hook whereby a board-specific routine can be called to
16815 configure hardware for a PIO mode. The prototype for the board-specific
16818 int inline ide_set_piomode(int pio_mode)
16820 ide_set_piomode should be prepared to configure hardware for a pio_mode
16821 between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
16823 Signed-off-by: Steven A. Falco <sfalco@harris.com>
16825 commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
16826 Author: Steven A. Falco <sfalco@harris.com>
16827 Date: Fri Aug 15 15:29:12 2008 -0400
16829 Replace enums in ata.h with an include of libata.h
16831 This patch removes some enums from ata.h and replaces them with an
16832 include of libata.h. This way, we eliminate duplicated code, and
16833 prevent errors whereby the different versions could be out of sync.
16835 Signed-off-by: Steven A. Falco <sfalco@harris.com>
16837 commit 0de0afbca865ecf482b4d2b635236746def8518f
16838 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16839 Date: Fri Aug 15 18:32:41 2008 +0200
16841 coldfire: fix CFI drivers activation with new macro
16843 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
16845 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16847 commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
16848 Author: Kumar Gala <galak@kernel.crashing.org>
16849 Date: Fri Aug 15 08:24:35 2008 -0500
16851 fdt: fdt addr w/o any args reports back the current working address
16853 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16855 commit f953d99fd528a496b400a706b511eaf8e3ea66af
16856 Author: Kumar Gala <galak@kernel.crashing.org>
16857 Date: Fri Aug 15 08:24:34 2008 -0500
16859 fdt: added the ability to set initrd start/end via chosen command
16861 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16863 commit ffa4bafacaef67058463b3d7d0099ced57569dd2
16864 Author: Kumar Gala <galak@kernel.crashing.org>
16865 Date: Fri Aug 15 08:24:33 2008 -0500
16867 Add command to enable/disable interrupts
16869 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16871 commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
16872 Author: Nick Spence <nick.spence@freescale.com>
16873 Date: Tue Aug 19 22:21:16 2008 -0700
16875 CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
16877 This patch fixes a missing vendor code in the flash_real_protect() function.
16879 Signed-off-by: Nick Spence <nick.spence@freescale.com>
16880 Signed-off-by: Stefan Roese <sr@denx.de>
16882 commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
16883 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16884 Date: Tue Aug 19 16:53:39 2008 +0000
16886 CFI: Fix AMD Legacy sector protect
16888 New implement sector lock and unlock or softlock commands
16889 do not exist in AMD legacy flash. Thus, causing issue
16890 when erasing AMD legacy flash (such as lv040)
16892 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16893 Signed-off-by: Stefan Roese <sr@denx.de>
16895 commit 492671404140f09d5b21b3d2ce4e362c0692c069
16896 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16897 Date: Wed Aug 20 09:40:16 2008 +0200
16899 hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
16901 CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
16903 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16905 commit 33eac2b3d946fc998a09245dfe54d017079b9056
16906 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16907 Date: Wed Aug 20 09:28:36 2008 +0200
16909 hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
16911 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16913 commit 25da0b84195fdda89a943b2d25757db5afeef5b8
16914 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16915 Date: Wed Aug 20 09:27:37 2008 +0200
16917 favr-32-ezkit: Fix printf format warnings
16919 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16921 commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
16922 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16923 Date: Fri Aug 15 12:04:25 2008 +0200
16925 MAINTAINERS: Sort avr32 section alphabetically
16927 The rest of the MAINTAINERS file appears to be sorted
16928 almost-alphabetically, but entries for the newly added AVR32 boards were
16929 added somewhat randomly. This patch sorts the list alphabetically again.
16931 Also update my e-mail address. The old one still works, but it may not
16934 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16936 commit 13b50fe3bc065c48911fa373231421280855a9d6
16937 Author: Mark Jackson <mpfj@mimc.co.uk>
16938 Date: Wed Jul 30 13:07:27 2008 +0100
16940 avr32: Add MIMC200 board
16942 The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
16943 8MByte FLASH and 128KByte FRAM.
16945 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
16946 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16948 commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
16949 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
16950 Date: Wed Jul 9 21:07:34 2008 +0900
16952 rtl8169: add support for RTL8110SCL
16954 This patch fixes a problem that RTL8110SCL started transfer
16955 with an incorrect memory address.
16957 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
16958 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16960 commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
16961 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16962 Date: Wed Jun 25 15:48:52 2008 -0500
16964 Fix dm9000 receive status and len little endian issue
16966 The received status and len was in little endian
16967 format and caused the ethernet unable to proceed
16968 further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
16970 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16971 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16973 commit fcd69a1a57fb2af4d26201422095a4be9f36963e
16974 Author: Kumar Gala <galak@kernel.crashing.org>
16975 Date: Fri Aug 15 08:24:32 2008 -0500
16977 Clean up usage of icache_disable/dcache_disable
16979 There is no point in disabling the icache on 7xx/74xx/86xx parts and not
16980 also flushing the icache. All callers of invalidate_l1_instruction_cache()
16981 call icache_disable() right after. Make it so icache_disable() calls
16982 invalidate_l1_instruction_cache() for us.
16984 Also, dcache_disable() already calls dcache_flush() so there is no point
16985 in the explicit calls of dcache_flush().
16987 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16989 commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
16990 Author: Kumar Gala <galak@kernel.crashing.org>
16991 Date: Fri Aug 15 08:24:31 2008 -0500
16993 Update linux bootm to support ePAPR client interface
16995 The ePAPR spec has some subtle differences from the current device
16996 tree based boot interface to the powerpc linux kernel. The powerpc
16997 linux kernel currently ignores the differences that ePAPR specifies.
16999 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17001 commit b734e5556a239b3be5f9693b2f4b4b739683ec16
17002 Author: Wolfgang Denk <wd@denx.de>
17003 Date: Mon Aug 18 23:50:20 2008 +0200
17005 Minor code cleanup: keep lists sorted.
17007 Signed-off-by: Wolfgang Denk <wd@denx.de>
17009 commit d0039d4ed275e6ca09fb417895024ad02be118c4
17010 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17011 Date: Wed Jul 23 19:10:14 2008 +0200
17013 Add support for ADT7460 I2C monitor chip
17015 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17017 commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
17018 Author: Michal Simek <monstr@monstr.eu>
17019 Date: Mon Jul 14 19:45:45 2008 +0200
17021 video: Clean drivers/video/Makefile
17023 Signed-off-by: Michal Simek <monstr@monstr.eu>
17025 commit 871c18dd301752270e1f74328c846c3104be1e2e
17026 Author: Michal Simek <monstr@monstr.eu>
17027 Date: Mon Jul 14 19:45:37 2008 +0200
17029 rtc: Clean drivers/rtc/Makefile
17031 Signed-off-by: Michal Simek <monstr@monstr.eu>
17033 commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
17034 Author: Michal Simek <monstr@monstr.eu>
17035 Date: Mon Jul 14 19:45:35 2008 +0200
17037 i2c: Clean drivers/i2c/ Makefile
17039 Signed-off-by: Michal Simek <monstr@monstr.eu>
17041 commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
17042 Author: Harald Welte <laforge@openmoko.org>
17043 Date: Wed Jul 9 22:30:30 2008 +0800
17045 Add 'license' command to U-Boot command line
17047 The 'license' command includes the U-Boot license (GPLv2) into the
17048 actual bootloader binary. The license text can be shown interactively
17049 at the U-Boot commandline.
17051 For products where the commandline can actually be accessed by the
17052 end user, this helps to prevent inadvertent GPL violations, since the
17053 GPLv2 license text can no longer be 'forgotten' to be included into
17056 The 'license' command can be enabled by CONFIG_CMD_LICENSE.
17058 Signed-off-by: Harald Welte <laforge@openmoko.org>
17060 commit fe2ce5500ebf43d79d227190bd2370232d5b113d
17061 Author: Harald Welte <laforge@gnumonks.org>
17062 Date: Sun Jul 6 15:56:38 2008 +0800
17064 add 'unzip' command to u-boot commandline
17066 [PATCH] add new 'unzip' command to u-boot commandline
17068 common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
17069 memory to memory, and option CONFIG_CMD_UNZIP to enable it
17071 Signed-off-by: Werner Almesberger <werner@openmoko.org>
17072 Signed-off-by: Harald Welte <laforge@openmoko.org>
17074 commit 07efc9e321619c3dec213310c32e011aa6f02783
17075 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17076 Date: Wed Aug 6 19:37:17 2008 -0500
17078 Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
17080 The CFG_ENV_SIZE is not suitable used for SPI flash erase
17081 sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
17082 Add condition check if CFG_ENV_SIZE is larger than
17083 CFG_ENV_SECT_SIZE, calculate the right number of sectors for
17086 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17088 commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
17089 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17090 Date: Mon Aug 11 15:54:25 2008 +0000
17092 ColdFire: Multiple fixes for M5282EVB
17094 Incorrect CFG_HZ value, change 1000000 to 1000.
17095 Rename #waring to #warning. RAMBAR1 uses twice
17096 in start.S, rename the later to FLASHBAR. Insert
17097 nop for DRAM setup. And, env_offset in linker file.
17099 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17101 commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
17102 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17103 Date: Mon Aug 11 15:26:43 2008 +0000
17105 ColdFire: Move m5282evb from board to board/freescale
17107 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17109 commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
17110 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17111 Date: Mon Aug 11 15:25:07 2008 +0000
17113 ColdFire: Move m5272c3 from board to board/freescale
17115 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17117 commit 659e9bad629a480f606b286d5703aef7159edf98
17118 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17119 Date: Mon Aug 11 15:23:16 2008 +0000
17121 ColdFire: Move m5271evb from board to board/freescale
17123 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17125 commit 05316f8ece8206339a208ec052f039cd0f7ca922
17126 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17127 Date: Mon Aug 11 13:41:49 2008 +0000
17129 ColdFire: Add M54451EVB platform support for MCF5445x
17131 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17133 commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
17134 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17135 Date: Wed Aug 6 19:14:08 2008 -0500
17137 ColdFire: Add Serial Flash support for M54455EVB
17139 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17141 commit 9f751551456828b2d0ff417f10959fb0c7110bd0
17142 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17143 Date: Wed Jul 23 20:38:53 2008 -0500
17145 ColdFire: Implement SBF feature for M5445EVB
17147 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17149 commit a7323bba229203aae2604afde131ab47bad4eadc
17150 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17151 Date: Wed Jul 23 17:53:36 2008 -0500
17153 ColdFire: Add SSPI feature for MCF5445x
17155 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17157 commit b2d022d1ac3f59bffa9cec249341e77aea168abc
17158 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17159 Date: Wed Jul 23 17:37:10 2008 -0500
17161 ColdFire: Use CFI Flash driver for M54455EVB
17163 Remove non-common flash driver in
17164 board/freescale/m54455evb/flash.c. The non-cfi flash will
17165 use CONFIG_FLASH_CFI_LEGACY to configure the flash
17168 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17170 commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
17171 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17172 Date: Wed Jul 23 17:11:47 2008 -0500
17174 ColdFire: Add M5253DEMO platform support for MCF5253
17176 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17178 commit 80ba61fd82569af40e04d4a089257b81881884f2
17179 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17180 Date: Wed Aug 6 14:17:09 2008 -0500
17182 ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
17184 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17186 commit d361307e73ce1f6fc68760123f37d4876f851f3e
17187 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17188 Date: Wed Aug 6 14:11:36 2008 -0500
17190 ColdFire: Fix M5253EVB dram bring up issue
17192 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17194 commit 4b0708093e15b412296328bf81325cf9b69fe512
17195 Author: Wolfgang Denk <wd@denx.de>
17196 Date: Thu Aug 14 14:41:06 2008 +0200
17198 Coding Style cleanup, update CHANGELOG
17200 Signed-off-by: Wolfgang Denk <wd@denx.de>
17202 commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
17203 Author: Scott Wood <scottwood@freescale.com>
17204 Date: Wed Aug 13 18:24:05 2008 -0500
17206 socrates: Update NAND driver to new API.
17208 Also, fix some minor formatting issues, and simplify the handling of
17209 "state" for writes.
17211 Signed-off-by: Scott Wood <scottwood@freescale.com>
17213 commit ba22d10f39eaeedd035e8265616e31ff88e314d5
17214 Author: Scott Wood <scottwood@freescale.com>
17215 Date: Wed Aug 13 18:03:40 2008 -0500
17217 quad100hd: Update NAND driver to new API.
17219 Signed-off-by: Scott Wood <scottwood@freescale.com>
17221 commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
17222 Author: Scott Wood <scottwood@freescale.com>
17223 Date: Wed Aug 13 17:53:48 2008 -0500
17225 m5373evb: Update NAND driver to new API.
17227 Signed-off-by: Scott Wood <scottwood@freescale.com>
17229 commit 1a23a197c8722b805f40895544bbdb1a648c1c82
17230 Author: Scott Wood <scottwood@freescale.com>
17231 Date: Wed Aug 13 17:04:30 2008 -0500
17233 s3c24x0: Update NAND driver to new API.
17235 Signed-off-by: Scott Wood <scottwood@freescale.com>
17237 commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
17238 Author: Scott Wood <scottwood@freescale.com>
17239 Date: Wed Aug 13 15:56:00 2008 -0500
17241 at91: Update board NAND drivers to current API.
17243 Signed-off-by: Scott Wood <scottwood@freescale.com>
17245 commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
17246 Author: Kyungmin Park <kmpark@infradead.org>
17247 Date: Wed Aug 13 09:11:02 2008 +0900
17249 Fix OneNAND build break
17251 Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
17252 - fix bufferram management at erase operation
17253 This patch includes the NAND/OneNAND state filed too.
17255 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
17256 Signed-off-by: Scott Wood <scottwood@freescale.com>
17258 commit 9483df6408c25f16060432de3868901e352e23bc
17259 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17260 Date: Wed Aug 13 01:40:43 2008 +0200
17262 drivers/mtd/nand_legacy: Move conditional compilation to Makefile
17264 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17266 commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
17267 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17268 Date: Wed Aug 13 01:40:43 2008 +0200
17270 drivers/mtd/nand: Move conditional compilation to Makefile
17272 rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
17274 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17276 commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
17277 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17278 Date: Wed Aug 13 01:40:42 2008 +0200
17280 drivers/mtd/onenand: Move conditional compilation to Makefile
17282 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17284 commit 00b1883a4cac59d97cd297b1a3a398db85982865
17285 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17286 Date: Wed Aug 13 01:40:42 2008 +0200
17288 drivers/mtd: Move conditional compilation to Makefile
17290 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
17292 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17294 commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
17295 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17296 Date: Wed Aug 13 01:40:41 2008 +0200
17298 drivers/qe: Move conditional compilation to Makefile
17300 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17302 commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
17303 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17304 Date: Wed Aug 13 01:40:40 2008 +0200
17306 drivers/pci: Move conditional compilation to Makefile
17308 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17310 commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
17311 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17312 Date: Wed Aug 13 01:40:40 2008 +0200
17314 drivers/misc: Move conditional compilation to Makefile
17316 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17318 commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
17319 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17320 Date: Wed Aug 13 01:40:40 2008 +0200
17322 drivers/input: Move conditional compilation to Makefile
17324 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17326 commit 88f57e093114a44aa9a858d52b099bcc52034a8c
17327 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17328 Date: Wed Aug 13 01:40:39 2008 +0200
17330 drivers/dma: Move conditional compilation to Makefile
17332 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17334 commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
17335 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17336 Date: Wed Aug 13 01:40:39 2008 +0200
17338 drivers/block: Move conditional compilation to Makefile
17340 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17342 commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
17343 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17344 Date: Wed Aug 13 01:40:39 2008 +0200
17346 serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
17348 move also conditional compilation to Makefile
17350 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17352 commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
17353 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17354 Date: Wed Aug 13 01:40:38 2008 +0200
17356 serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
17358 move also conditional compilation to Makefile
17360 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17362 commit d6e9ee92e890f67594ab150689510df361133ead
17363 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17364 Date: Wed Aug 13 01:40:38 2008 +0200
17366 common: Move conditional compilation to Makefile
17368 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17370 commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
17371 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17372 Date: Wed Aug 13 01:40:09 2008 +0200
17374 mx31: move freescale's mx31 boards to vendor board dir
17376 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17378 commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
17379 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17380 Date: Sat Jul 5 23:11:11 2008 +0200
17382 at91: move arch-at91sam9 to arch-at91
17384 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17386 commit 195ccfc5991d48764b2519941e3507f693851d5d
17387 Author: Fathi BOUDRA <fabo@debian.org>
17388 Date: Wed Aug 6 10:06:20 2008 +0200
17390 OneNAND: Fill in MTD function pointers for OneNAND.
17392 onenand_print_device_info():
17393 - Now returns a string to be placed in mtd->name,
17394 rather than calling printf.
17395 - Remove verbose parameter as it becomes useless.
17397 Signed-off-by: Fathi Boudra <fabo@debian.org>
17398 Signed-off-by: Scott Wood <scottwood@freescale.com>
17400 commit aa646643b6bc250cb3a4966bf728876e0c10d329
17401 Author: Guennadi Liakhovetski <lg@denx.de>
17402 Date: Wed Aug 6 21:42:07 2008 +0200
17404 nand_spl: Support page-aligned read in nand_load, use chipselect
17406 Supporting page-aligned reads doesn't incure any sinificant overhead, just
17407 a small change in the algorithm. Also replace in_8 with readb, since there
17410 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
17411 Signed-off-by: Scott Wood <scottwood@freescale.com>
17413 commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
17414 Author: Scott Wood <scottwood@freescale.com>
17415 Date: Tue Aug 5 11:15:59 2008 -0500
17417 NAND boot: Update large page support for current API.
17419 Also, remove the ctrl variable in favor of passing the constants
17420 directly, and remove redundant (u8) casts.
17422 Signed-off-by: Scott Wood <scottwood@freescale.com>
17424 commit e4c09508545d1c45617ba45391c03c03cbc360b9
17425 Author: Scott Wood <scottwood@freescale.com>
17426 Date: Mon Jun 30 14:13:28 2008 -0500
17428 NAND boot: MPC8313ERDB support
17430 Note that with older board revisions, NAND boot may only work after a
17431 power-on reset, and not after a warm reset. I don't have a newer board
17432 to test on; if you have a board with a 33MHz crystal, please let me know
17433 if it works after a warm reset.
17435 Signed-off-by: Scott Wood <scottwood@freescale.com>
17437 commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
17438 Author: Scott Wood <scottwood@freescale.com>
17439 Date: Thu Jun 26 14:06:52 2008 -0500
17441 mpc8313erdb: Enable NAND in config.
17443 Signed-off-by: Scott Wood <scottwood@freescale.com>
17445 commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
17446 Author: Guennadi Liakhovetski <lg@denx.de>
17447 Date: Thu Jul 31 12:38:26 2008 +0200
17449 NAND: Do not write or read a whole block if it is larger than the environment
17451 Environment can be smaller than NAND block size, do not need to read a whole
17452 block and minimum for writing is one page. Also remove an unused variable.
17454 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
17455 Signed-off-by: Scott Wood <scottwood@freescale.com>
17457 commit eafcabd15f00c142156235c519fcc55b10993241
17458 Author: Marcel Ziswiler <marcel@ziswiler.com>
17459 Date: Sun Jun 22 16:30:06 2008 +0200
17461 NAND: chip->state does not always get set.
17463 Fixes an issue with chip->state not always being set causing troubles.
17465 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
17466 Signed-off-by: Scott Wood <scottwood@freescale.com>
17468 commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
17469 Author: Ilya Yanok <yanok@emcraft.com>
17470 Date: Mon Jun 30 15:34:40 2008 +0200
17472 NAND: Scan bad blocks lazily.
17474 Rather than scanning on boot, scan upon the first attempt to check the
17475 badness of a block. This speeds up boot when not using NAND, and reduces
17476 the likelihood of needing to reflash via JTAG if NAND becomes
17479 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17480 Signed-off-by: Scott Wood <scottwood@freescale.com>
17482 commit dfbf617ff055e4216f78d358b0867c548916d14b
17483 Author: Scott Wood <scottwood@freescale.com>
17484 Date: Thu Jun 12 13:20:16 2008 -0500
17486 NAND read/write fix
17488 Implement block-skipping read/write, based on a patch from
17489 Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
17491 Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
17492 Signed-off-by: Scott Wood <scottwood@freescale.com>
17494 commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
17495 Author: Scott Wood <scottwood@freescale.com>
17496 Date: Thu Jun 12 13:13:23 2008 -0500
17498 NAND: Always skip blocks on read/write/boot.
17500 Use of the non-skipping versions was almost always (if not always)
17501 an error, and no valid use case has been identified.
17503 Signed-off-by: Scott Wood <scottwood@freescale.com>
17505 commit e1c3dbada349992875934575c97b328ab2cb33ca
17506 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17507 Date: Thu Jun 12 11:10:21 2008 -0500
17509 nand: fsl_upm: convert to updated MTD NAND infrastructure
17511 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17512 Signed-off-by: Scott Wood <scottwood@freescale.com>
17514 commit 300253306acc72b1b2e9faf0987f86551151d7cf
17515 Author: Scott Wood <scottwood@freescale.com>
17516 Date: Thu May 22 15:02:46 2008 -0500
17518 fsl_elbc_nand: Hard-code the FBAR/FPAR split.
17520 The hardware has separate registers for block and page-within-block,
17521 but the division between the two has no apparent relation to the
17522 actual erase block size of the NAND chip.
17524 Signed-off-by: Scott Wood <scottwood@freescale.com>
17526 commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
17527 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17528 Date: Fri Mar 28 22:10:54 2008 +0300
17530 fsl_elbc_nand: workaround for hangs during nand write
17532 Using current driver elbc sometimes hangs during nand write. Reading back
17533 last byte helps though (thanks to Scott Wood for the idea).
17535 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17536 Signed-off-by: Scott Wood <scottwood@freescale.com>
17538 commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
17539 Author: Scott Wood <scottwood@freescale.com>
17540 Date: Fri Mar 21 16:12:51 2008 -0500
17542 Freescale eLBC FCM NAND driver
17544 This is a driver for the Flash Control Machine of the enhanched Local Bus
17545 Controller found on some Freescale chips (such as the mpc8313 and the
17548 Signed-off-by: Scott Wood <scottwood@freescale.com>
17550 commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
17551 Author: Scott Wood <scottwood@freescale.com>
17552 Date: Tue Mar 18 15:29:14 2008 -0500
17554 Don't panic if a controller driver does ecc its own way.
17556 Some hardware, such as the enhanced local bus controller used on some
17557 mpc83xx chips, does ecc transparently when reading and writing data, rather
17558 than providing a generic calculate/correct mechanism that can be exported to
17559 the nand subsystem.
17561 The subsystem should not BUG() when calculate, correct, or hwctl are
17562 missing, if the methods that call them have been overridden.
17564 Signed-off-by: Scott Wood <scottwood@freescale.com>
17566 commit e52b34d40a8a646e3d11638ea8797e96398dba13
17567 Author: Stefan Roese <sr@denx.de>
17568 Date: Thu Jan 10 18:47:33 2008 +0100
17570 NAND: Make NAND driver less verbose per default
17572 This patch turns off printing of bad blocks per default upon bootup.
17573 This can always be shown via the "nand bad" command later.
17575 Signed-off-by: Stefan Roese <sr@denx.de>
17577 commit fe56a2772e5c59577df906163d0d4b29b056140e
17578 Author: Sergey Kubushyn <ksi@koi8.net>
17579 Date: Wed Jan 9 15:36:20 2008 +0100
17581 NAND: Davinci driver updates
17583 Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
17584 don't have hardware handy so I can not test it at the moment but changes are
17585 rather trivial so it should work. It would be nice if somebody with a
17586 hardware checked it anyways.
17588 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
17590 commit deac913effd8d80535c9ff4687b6fcdff540c554
17591 Author: Stefan Roese <sr@denx.de>
17592 Date: Sat Jan 5 16:50:32 2008 +0100
17594 NAND: Fix compilation warning and small coding style issue
17596 Signed-off-by: Stefan Roese <sr@denx.de>
17598 commit c568f77acdf896fc3dd6413ce53205b17ba809a3
17599 Author: Stefan Roese <sr@denx.de>
17600 Date: Sat Jan 5 16:49:37 2008 +0100
17602 NAND: Update nand_spl driver to match updated nand subsystem
17604 This patch changes the NAND booting driver nand_spl/nand_boot.c to match
17605 the new infrastructure from the updated NAND subsystem. This NAND
17606 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
17609 Signed-off-by: Stefan Roese <sr@denx.de>
17611 commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
17612 Author: Stefan Roese <sr@denx.de>
17613 Date: Sat Jan 5 16:47:58 2008 +0100
17615 NAND: Update 4xx NDFC driver to match updated nand subsystem
17617 This patch changes the 4xx NAND driver ndfc.c to match the new
17618 infrastructure from the updated NAND subsystem. This NAND
17619 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
17622 Tested successfully on AMCC Sequoia and Bamboo.
17624 Signed-off-by: Stefan Roese <sr@denx.de>
17626 commit 12072264528eba33737bc9674e19f0e925ffda23
17627 Author: Stefan Roese <sr@denx.de>
17628 Date: Sat Jan 5 16:43:25 2008 +0100
17630 NAND: Change nand_wait_ready() to not call nand_wait()
17632 This patch changes nand_wait_ready() to not just call nand_wait(),
17633 since this will send a new command to the NAND chip. We just want to
17634 wait for the chip to become ready here.
17636 Signed-off-by: Stefan Roese <sr@denx.de>
17638 commit 9ad754fef5053144daed3b007adaf1c9bec654c9
17639 Author: William Juul <william.juul@datarespons.no>
17640 Date: Fri Dec 14 16:33:45 2007 +0100
17642 make nand dump and nand dump.oob work
17644 Signed-off-by: William Juul <william.juul@tandberg.com>
17645 Signed-off-by: Scott Wood <scottwood@freescale.com>
17647 commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
17648 Author: William Juul <william.juul@datarespons.no>
17649 Date: Mon Nov 19 14:46:00 2007 +0100
17651 moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
17653 Signed-off-by: William Juul <william.juul@tandberg.com>
17655 commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
17656 Author: William Juul <william.juul@tandberg.com>
17657 Date: Tue Jun 10 16:18:13 2008 -0500
17659 Clean out unneeded files
17661 Signed-off-by: William Juul <william.juul@tandberg.com>
17663 commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
17664 Author: William Juul <william.juul@datarespons.no>
17665 Date: Fri Nov 16 08:44:27 2007 +0100
17667 Create symlinks from yaffs2/direct to yaffs2
17669 Signed-off-by: William Juul <william.juul@tandberg.com>
17671 commit 90ef117b68387d66763291af0117677644166611
17672 Author: William Juul <william.juul@datarespons.no>
17673 Date: Thu Nov 15 12:23:57 2007 +0100
17675 Incorporate yaffs2 into U-boot
17677 To use YAFFS2 define CONFIG_YAFFS2
17679 Signed-off-by: William Juul <william.juul@tandberg.com>
17680 Signed-off-by: Scott Wood <scottwood@freescale.com>
17682 commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
17683 Author: William Juul <william.juul@datarespons.no>
17684 Date: Thu Nov 15 11:13:05 2007 +0100
17688 Direct import of yaffs as a tarball as of 20071113 from their public
17689 CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
17691 The code can also be imported on the command line with:
17692 export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
17693 (Hit return when asked for a password)
17694 cvs checkout yaffs2
17696 Signed-off-by: William Juul <william.juul@tandberg.com>
17697 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
17699 commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
17700 Author: William Juul <william.juul@datarespons.no>
17701 Date: Wed Nov 14 14:28:11 2007 +0100
17703 Whitespace cleanup and marking broken code.
17705 Changes requested by maintainer Stefan Roese after
17706 posting patch to U-boot mailing list.
17708 Signed-off-by: William Juul <william.juul@tandberg.com>
17709 Signed-off-by: Scott Wood <scottwood@freescale.com>
17711 commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
17712 Author: William Juul <william.juul@datarespons.no>
17713 Date: Fri Nov 9 13:32:30 2007 +0100
17715 Fixing coding style issues
17717 - Fixing leading white spaces
17718 - Fixing indentation where 4 spaces are used instead of tab
17719 - Removing C++ comments (//), wherever I introduced them
17721 Signed-off-by: William Juul <william.juul@tandberg.com>
17722 Signed-off-by: Scott Wood <scottwood@freescale.com>
17724 commit 4cbb651b29cb64d378a06729970e1e153bb605b1
17725 Author: William Juul <william.juul@datarespons.no>
17726 Date: Thu Nov 8 10:39:53 2007 +0100
17728 Remove white space at end.
17730 Signed-off-by: William Juul <william.juul@tandberg.com>
17731 Signed-off-by: Scott Wood <scottwood@freescale.com>
17733 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
17734 Author: William Juul <william.juul@datarespons.no>
17735 Date: Wed Oct 31 13:53:06 2007 +0100
17737 Update MTD to that of Linux 2.6.22.1
17739 A lot changed in the Linux MTD code, since it was last ported from
17740 Linux to U-Boot. This patch takes U-Boot NAND support to the level
17741 of Linux 2.6.22.1 and will enable support for very large NAND devices
17742 (4KB pages) and ease the compatibility between U-Boot and Linux
17745 This patch is tested on two custom boards with PPC and ARM
17746 processors running YAFFS in U-Boot and Linux using gcc-4.1.2
17749 MAKEALL ppc/arm has some issues:
17750 * DOC/OneNand/nand_spl is not building (I have not tried porting
17751 these parts, and since I do not have any HW and I am not familiar
17752 with this code/HW I think its best left to someone else.)
17754 Except for the issues mentioned above, I have ported all drivers
17755 necessary to run MAKEALL ppc/arm without errors and warnings. Many
17756 drivers were trivial to port, but some were not so trivial. The
17757 following drivers must be examined carefully and maybe rewritten to
17760 cpu/arm926ejs/davinci/nand.c
17762 board/zylonite/nand.c
17764 Signed-off-by: William Juul <william.juul@tandberg.com>
17765 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
17766 Signed-off-by: Scott Wood <scottwood@freescale.com>
17768 commit cd82919e6c8a73b363a26f34b734923844e52d1c
17769 Author: Wolfgang Denk <wd@denx.de>
17770 Date: Tue Aug 12 16:08:38 2008 +0200
17772 Coding style cleanup, update CHANGELOG, prepare release
17774 Signed-off-by: Wolfgang Denk <wd@denx.de>
17776 commit 17e900b8c0f38d922da47073246219dce2a847f2
17777 Author: Wolfgang Denk <wd@denx.de>
17778 Date: Tue Aug 12 14:54:04 2008 +0200
17780 MVBC_P: fix compile problem
17782 Signed-off-by: Wolfgang Denk <wd@denx.de>
17784 commit 52b047ae48219b59bebe37ba743ab103fd4f8316
17785 Author: Wolfgang Denk <wd@denx.de>
17786 Date: Tue Aug 12 12:10:11 2008 +0200
17788 MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
17790 Signed-off-by: Wolfgang Denk <wd@denx.de>
17792 commit c9c101c660b3d1995045c61c7c6041f52b6cf335
17793 Author: Wolfgang Denk <wd@denx.de>
17794 Date: Tue Aug 12 00:36:53 2008 +0200
17796 ads5121: fix compiler warnings (unused variables)
17798 Signed-off-by: Wolfgang Denk <wd@denx.de>
17800 commit 902ca09246039964d59bbcb519b1e1b5aed01308
17801 Author: Kumar Gala <galak@kernel.crashing.org>
17802 Date: Mon Aug 11 11:29:28 2008 -0500
17804 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
17806 Use CONFIG_NUM_CPUS to match existing define used by 86xx.
17808 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17809 Acked-by: Jon Loeliger <jdl@freescale.com>
17811 commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
17812 Author: Kumar Gala <galak@kernel.crashing.org>
17813 Date: Mon Aug 11 09:20:53 2008 -0500
17815 Fix fallout from autostart revert
17817 The autostart revert caused a bit of duplicated code as well as
17818 code that was using images->autostart that needs to get removed so
17819 we can build again.
17821 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17823 commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
17824 Author: Kumar Gala <galak@kernel.crashing.org>
17825 Date: Mon Aug 11 09:16:25 2008 -0500
17827 Fix compile error related to r8a66597-hcd & usb
17829 When building the 8544DS board we get this error:
17831 In file included from r8a66597-hcd.c:22:
17832 u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
17833 make[1]: *** [r8a66597-hcd.o] Error 1
17835 The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
17838 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17840 commit 2d0daa03612338a813e3c9d22680e54eabfea378
17841 Author: Becky Bruce <becky.bruce@freescale.com>
17842 Date: Mon Aug 4 14:02:26 2008 -0500
17844 POWERPC 86xx: Move BAT setup code to C
17846 This is needed because we will be possibly be locating
17847 devices at physical addresses above 32bits, and the asm
17848 preprocessing does not appear to deal with ULL constants
17849 properly. We now call write_bat in lib_ppc/bat_rw.c.
17851 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
17852 Acked-by: Jon Loeliger <jdl@freescale.com>
17854 commit 9de67149db576c91b9c2a0a182652331e7e44211
17855 Author: Becky Bruce <becky.bruce@freescale.com>
17856 Date: Mon Aug 4 14:01:53 2008 -0500
17858 POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
17860 Perform sync/isync as required by the architecture.
17862 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
17863 Acked-by: Jon Loeliger <jdl@freescale.com>
17865 commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
17866 Author: Becky Bruce <becky.bruce@freescale.com>
17867 Date: Mon Aug 4 14:01:16 2008 -0500
17869 POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
17871 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
17872 Acked-by: Jon Loeliger <jdl@freescale.com>
17874 commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
17875 Author: Magnus Lilja <lilja.magnus@gmail.com>
17876 Date: Sun Aug 3 21:44:10 2008 +0200
17878 i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
17880 Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
17881 contacts instead of only the first 256 ones as is the case prior to
17884 Add missing MUX_* macros and update board files to use the new macros.
17886 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
17888 commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
17889 Author: Magnus Lilja <lilja.magnus@gmail.com>
17890 Date: Sun Aug 3 21:43:37 2008 +0200
17892 i.MX31: Fix IOMUX related typos
17894 Correct the names of some IOMUX macros.
17896 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
17898 commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
17899 Author: Steve Sakoman <steve@sakoman.com>
17900 Date: Mon Aug 11 20:26:16 2008 +0200
17902 OneNAND: Remove unused parameters to onenand_verify_page
17904 The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
17906 Signed-off-by: Steve Sakoman <steve@sakoman.com>
17907 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
17909 commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
17910 Author: Anatolij Gustschin <agust@denx.de>
17911 Date: Fri Aug 8 18:00:40 2008 +0200
17913 video: fix bug in cfb_console code
17915 FILL_15BIT_555RGB macro extension for pixel swapping
17916 by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
17917 introduced a bug in cfb_console:
17919 Bitmaps with odd-numbered width won't be rendered
17920 correctly and even U-Boot crashes are observed on
17921 some platforms while repeated rendering of such
17922 bitmaps with "bmp display". Also if a bitmap is
17923 rendered to an odd-numbered x starting position,
17924 the same problem occurs. This patch is an attempt
17927 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17929 commit d9015f6a50d7258125349ef5c2af836458a0029a
17930 Author: Anatolij Gustschin <agust@denx.de>
17931 Date: Fri Aug 8 18:00:39 2008 +0200
17933 video: fix bug in logo_plot
17935 If logo_plot() should ever be called with x starting
17936 position other than zero and for pixel depths greater
17937 than 8bpp, logo colors distortion will be observed.
17938 This patch fixes the issue.
17940 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17942 commit 406819ae94f79f5b59e01d163380ca7d83709251
17943 Author: Wolfgang Denk <wd@denx.de>
17944 Date: Mon Aug 11 00:17:52 2008 +0200
17946 MAINTAINERS: sort entries
17948 Signed-off-by: Wolfgang Denk <wd@denx.de>
17950 commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
17951 Author: Roy Zang <tie-fei.zang@freescale.com>
17952 Date: Thu Aug 7 18:19:28 2008 +0800
17954 Add mpc7448hpc2 maintainer information
17956 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17958 commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
17959 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
17960 Date: Thu Aug 7 13:13:27 2008 +0530
17962 common/cmd_load.c - Minor code & Coding Style cleanup
17964 - os_data_header Variable is a carry over feature
17965 & unused. So removed all instance of this variable
17966 - Minor Code Style Update
17968 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
17969 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17971 commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
17972 Author: Magnus Lilja <lilja.magnus@gmail.com>
17973 Date: Wed Aug 6 19:32:33 2008 +0200
17975 Update the U-Boot wiki URL.
17977 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
17979 commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
17980 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
17981 Date: Sun Aug 10 17:56:36 2008 +0200
17983 OneNAND: Remove base address offset usage
17985 While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
17986 using OneNAND and some using NAND, we found some differences in OneNAND and
17987 NAND command address handling.
17989 As this might confuse users (it already confused us), we like to align OneNAND
17990 and NAND address handling.
17992 The issue is that cmd_onenand.c subtracts the onenand base address from the
17993 addresses you type into the u-boot command line so, unlike nand, you can't
17994 use addresses relative to the start of the onenand part e.g. this won't work:
17996 onenand read 82000000 280000 400000
18000 onenand read 82000000 20280000 400000
18002 Looking at recent git, the only board currently using OneNAND is Apollon, and
18003 for this the OneNAND base address is 0 (apollon.h)
18005 #define CFG_ONENAND_BASE 0x00000000
18007 so patch below won't break any existing boards and will align OneNAND and NAND
18008 handling on boards where OneNAND base address is != 0.
18010 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
18011 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
18012 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
18014 commit c11528083ef6e55e76df742228c26e39d151813d
18015 Author: Kumar Gala <galak@kernel.crashing.org>
18016 Date: Thu Aug 7 09:28:20 2008 -0500
18018 mpc85xx: workaround old binutils bug
18020 The recent change to move the .bss outside of the image gives older
18021 binutils (ld from eldk4.1/binutils-2.16) some headache:
18023 ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
18024 ppc_85xx-ld: final link failed: Bad value
18026 We workaround it by being explicit about the program headers and not
18027 assigning the .bss to a program header.
18029 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18031 commit 0bf202ec586d4466c900e987720fa635c594d689
18032 Author: Wolfgang Denk <wd@denx.de>
18033 Date: Sun Aug 10 01:26:26 2008 +0200
18035 Revert "[new uImage] Add autostart flag to bootm_headers structure"
18037 This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
18039 The commit was based on a misunderstanding of the (documented)
18040 meaning of the 'autostart' environment variable. It might cause
18041 boards to hang if 'autostart' was used, with the potential to brick
18042 them. Go back to the documented behaviour.
18050 Signed-off-by: Wolfgang Denk <wd@denx.de>
18052 commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
18053 Author: Wolfgang Denk <wd@denx.de>
18054 Date: Sat Aug 9 23:17:32 2008 +0200
18056 TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
18058 - enable CFI driver where this was forgotten
18059 - enable mtdparts support
18060 - adjust default environment
18063 Signed-off-by: Wolfgang Denk <wd@denx.de>
18065 commit 41266c9b5a5f873df3ec891bb0907616958b5602
18066 Author: Peter Tyser <ptyser@xes-inc.com>
18067 Date: Tue Aug 5 10:51:57 2008 -0500
18069 FIT: Fix handling of images without ramdisks
18071 boot_get_ramdisk() should not treat the case when a FIT image does
18072 not contain a ramdisk as an error.
18074 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
18075 Acked-by: Michal Simek <monstr@monstr.eu>
18077 commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
18078 Author: Sergey Lapin <slapin@ossfans.org>
18079 Date: Sat Aug 9 01:39:09 2008 +0400
18081 DataFlash: AT45DB021 fix and AT45DB081 support
18083 Fix for page size of AT45DB021. Also adding bigger AT45DB081
18084 which comes with some newer boards.
18086 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
18088 commit ba9324451b662dd393afa53e5cc36fc5d3d10966
18089 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
18090 Date: Fri Aug 8 16:30:23 2008 +0900
18092 sh: Update sh7763rdp config
18094 Add sh_eth support to sh7763rdp.
18096 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
18098 commit 21f971ec265f6042ec21636d55d06a6bc0751077
18099 Author: Wolfgang Denk <wd@denx.de>
18100 Date: Mon Jul 7 01:22:29 2008 +0200
18102 TQM823L: re-enable logo support; update LCD_INFO text
18104 Signed-off-by: Wolfgang Denk <wd@denx.de>
18106 commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
18107 Author: Wolfgang Denk <wd@denx.de>
18108 Date: Fri Aug 8 16:41:56 2008 +0200
18110 TQM8xxL: fix support for second flash bank
18112 When switching the TQM8xxL modules to use the CFI flash driver,
18113 support for the second flash bank was broken because the CFI driver
18114 did not support dynamically sized banks. This gets fixed now.
18116 Signed-off-by: Wolfgang Denk <wd@denx.de>
18118 commit 2a112b234d879f6390503a5f4e38246acce9d0b0
18119 Author: Wolfgang Denk <wd@denx.de>
18120 Date: Fri Aug 8 16:39:54 2008 +0200
18122 CFI: allow for dynamically determined flash sizes and addresses
18124 The CFI driver allowed only for static initializers in the
18125 CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
18126 several flash banks contiguously if the bank sizes were not known in
18127 advance, which kind of violates U-Boot's design philosophy.
18129 (will be used for example by the TQM8xxL boards)
18131 Signed-off-by: Wolfgang Denk <wd@denx.de>
18133 commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
18134 Author: Ben Warren <biggerbadderben@gmail.com>
18135 Date: Thu Aug 7 23:26:35 2008 -0700
18137 QE UEC: Fix compiler warnings
18139 Moved static functions earlier in file so forward declarations are not needed.
18141 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18143 commit d5d28fe4aad5f4535400647a5617c11039506467
18144 Author: David Saada <David.Saada@ecitele.com>
18145 Date: Mon Mar 31 02:37:38 2008 -0700
18147 QE UEC: Add MII Commands
18149 Add MII commands to the UEC driver. Note that once a UEC device is selected,
18150 any device on its MDIO bus can be addressed.
18152 Signed-off-by: David Saada <david.saada@ecitele.com>
18153 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18155 commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
18156 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
18157 Date: Wed Jul 9 21:07:38 2008 +0900
18159 usb: add support for R8A66597 usb controller
18161 add support for Renesas R8A66597 usb controller.
18162 This patch supports USB Host mode.
18164 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
18165 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18167 commit 1d10dcd041aaeae9fd7c821005692898a0303382
18168 Author: Hunter, Jon <jon-hunter@ti.com>
18169 Date: Sat Jul 26 18:59:16 2008 -0500
18171 Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
18173 Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
18175 Signed-off-by: Jon Hunter <jon-hunter@ti.com>
18176 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18178 commit eab1007334b93a6209f1ec33615e26ef5311ede7
18179 Author: Steven A. Falco <sfalco@harris.com>
18180 Date: Wed Aug 6 15:42:52 2008 -0400
18182 ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
18184 The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
18185 configuration to match the schematic, and also sets the SDR0_PFC1 register to
18186 select the corresponding mode for the UARTs.
18188 Signed-off-by: Steven A. Falco <sfalco@harris.com>
18189 Signed-off-by: Stefan Roese <sr@denx.de>
18191 commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
18192 Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
18193 Date: Wed Aug 6 14:42:13 2008 +0200
18195 avr32: add support for EarthLCD Favr-32 board
18197 This patch adds support for the Favr-32 board made by EarthLCD.
18199 This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
18200 has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
18201 Ethernet, audio out, USB device, SD-card slot, USART and various other
18202 connectors for cennecting stuff to SPI, I2C, GPIO, etc.
18204 Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
18205 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18207 commit bc9019e19758a19a388fb20ef18dc771cd39fdda
18208 Author: Rafael Campos <rafael.campos@hanscan.com>
18209 Date: Thu Jul 31 10:22:20 2008 +0200
18211 cfi-flash: Added support to flash_real_protect for Atmel flash devices
18213 Some of the flash memories produced by ATMEL start in read-only mode.
18214 We need to unprotect it. This patch allows the AT49BV6416 to work with
18215 cfi_flash memories. Tested in the at91rm9200ek board.
18217 Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
18218 Signed-off-by: Stefan Roese <sr@denx.de>
18220 commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
18221 Author: Guennadi Liakhovetski <lg@denx.de>
18222 Date: Tue Aug 5 15:36:39 2008 +0200
18224 cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
18226 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
18227 Signed-off-by: Stefan Roese <sr@denx.de>
18229 commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
18230 Author: Stefan Roese <sr@denx.de>
18231 Date: Wed Aug 6 14:06:03 2008 +0200
18235 Signed-off-by: Stefan Roese <sr@denx.de>
18237 commit f2302d4430e7f3f48308d6a585320fe96af8afbd
18238 Author: Stefan Roese <sr@denx.de>
18239 Date: Wed Aug 6 14:05:38 2008 +0200
18243 Signed-off-by: Stefan Roese <sr@denx.de>
18245 commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
18246 Author: Kenneth Johansson <kenneth@southpole.se>
18247 Date: Tue Jul 15 12:13:38 2008 +0200
18249 mpc5121: Move iopin features from board specific to common files.
18251 And in the process eliminate some duplicate register defines.
18253 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
18255 commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
18256 Author: John Rigby <jrigby@freescale.com>
18257 Date: Tue Aug 5 17:38:57 2008 -0600
18259 mpc5121: squash some fdt fixup errors
18261 On ADS5121 when booting linux the following errors are seen:
18262 Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
18263 Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
18264 Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
18266 This is caused by ft_cpu_setup trying to deal with
18267 both old and new soc node naming. This patch
18268 fixes this by being smarter about what to
18271 Also do soc node fixups by compatible instead of by path.
18272 A new board config called OF_SOC_COMPAT defined
18273 to be "fsl,mpc5121-immr" replaces the old
18274 OF_SOC node path that was defined to be "soc@80000000".
18276 Old device trees still work, but the compatiblity
18277 is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
18278 which is on by default in include/configs/ads5121.h.
18280 Signed-off-by: John Rigby <jrigby@freescale.com>
18282 commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
18283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18284 Date: Sat Aug 2 23:48:30 2008 +0200
18286 drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
18288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18290 commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
18291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18292 Date: Sat Aug 2 23:48:32 2008 +0200
18294 nios2/sysid: fix printf warning
18296 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18298 commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
18299 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18300 Date: Sat Aug 2 23:48:33 2008 +0200
18302 Fix remaining build issues with MPC8xx FADS boards.
18304 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18306 commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
18307 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18308 Date: Sat Aug 2 23:48:31 2008 +0200
18310 nios2: fix phys_addr_t and phys_size_t support
18312 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18314 commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
18315 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18316 Date: Sat Aug 2 23:48:34 2008 +0200
18318 mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
18320 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18322 commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
18323 Author: Mark Jackson <mpfj@mimc.co.uk>
18324 Date: Fri Aug 1 09:48:29 2008 +0100
18326 Fix bitmap display for atmel lcd controller
18328 The current lcd_display_bitmap() function does not work properly
18329 for the Atmel LCD controller.
18331 2 fixes need to be done:-
18333 (a) when setting the colour map, use the lcd_setcolreg() function
18334 as provided by the Atmel driver
18335 (b) the data is never actually written to the lcd framebuffer !!
18337 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
18339 commit 2a433c66b1e2770349fe4911be23c375f053ebd8
18340 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18341 Date: Fri Aug 1 08:40:34 2008 +0200
18343 qemu_mips: update README to follow qemu update about default machine
18345 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18347 commit ac169d645f5f0e0b9a232563099209e92a355d8e
18348 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18349 Date: Thu Jul 31 19:53:21 2008 -0500
18351 ColdFire: Fix compilation issue caused by a missing function
18353 Implement usec2ticks() which is used by fsl_i2c.c in
18356 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18358 commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
18359 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18360 Date: Thu Jul 31 19:53:06 2008 -0500
18362 Fix compilation error for TASREG
18364 TASREG is ColdFire platform, the include ppc4xx.h in
18365 board/esd/common/flash.c causes conflict.
18367 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18369 commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
18370 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18371 Date: Thu Jul 31 19:52:36 2008 -0500
18373 Fix compilation error for MCF5275
18375 Rename OBJ to COBJ in board/platform/Makefile
18377 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18379 commit 5c40548f01218360a1f1395198c50ff45f3035b5
18380 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18381 Date: Thu Jul 31 19:52:28 2008 -0500
18383 Fix compile error caused by incorrect function return type
18385 Rename int mii_init(void) to void mii_init(void) for idmr
18388 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18390 commit a58c78067c928976c082c758d3987e89ead5b191
18391 Author: Wolfgang Denk <wd@denx.de>
18392 Date: Fri Aug 1 12:06:22 2008 +0200
18394 Fix build issues with MPC8xx FADS boards.
18396 Signed-off-by: Wolfgang Denk <wd@denx.de>
18398 commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
18399 Author: Wolfgang Denk <wd@denx.de>
18400 Date: Thu Jul 31 17:54:03 2008 +0200
18402 Prepare v1.3.4-rc2: update CHANGELOG
18404 Signed-off-by: Wolfgang Denk <wd@denx.de>
18406 commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
18407 Author: Mark Jackson <mpfj@mimc.co.uk>
18408 Date: Thu Jul 31 16:09:00 2008 +0100
18410 Add gzipped logo support
18412 The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
18414 If this option is set, additionally to standard BMP
18415 images, gzipped BMP images can be displayed via the
18416 splashscreen support or the bmp command.
18418 However, the splashscreen function *only* supports standard BMP images.
18420 This patch adds the documented gzip support.
18422 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
18424 commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
18425 Author: Mark Jackson <mpfj@mimc.co.uk>
18426 Date: Thu Jul 31 15:56:48 2008 +0100
18428 Fix Atmel LCD controller endianess for AVR32 processors
18430 The Atmel lcd controller is used on Atmel's AT91 (little endian) and
18431 AVR32 (big endian) platforms.
18433 As such, the controller can handle both big and little endian memory.
18435 This patch fixes the driver for the AVR32 platform.
18437 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
18439 commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
18440 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18441 Date: Thu Jul 31 15:56:01 2008 +0200
18443 apollon: fix build out of tree
18445 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18447 commit 2e752be39d3e398d4ab89ffa6634c397df298297
18448 Author: Guennadi Liakhovetski <lg@denx.de>
18449 Date: Thu Jul 31 12:35:04 2008 +0200
18451 Uncompressed images loaded to their start address shall set load_end too
18453 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
18454 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
18456 commit c37207d7f51e19c17f859966f314e27cc1231801
18457 Author: Wolfgang Denk <wd@denx.de>
18458 Date: Wed Jul 16 16:38:59 2008 +0200
18460 Fix printf() format problems with configurable prompts
18462 U-Boot allows for configurable prompt strings using the
18463 CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
18464 the assumption was that any such user defined problts would contain
18465 exactly one "%d" format specifier. But some boards did not.
18467 To allow for flexible boot prompts without adding too complex code we
18468 now allow to specify the whole list of printf() arguments in the user
18469 definition. This is powerful, but requires a responsible user who
18470 really understands what he is doing, as he needs to know for exanple
18471 which variables are available in the respective context.
18473 Signed-off-by: Wolfgang Denk <wd@denx.de>
18475 commit 54754120637b6a7f4ff774fb199fc550bcfea1da
18476 Author: Wolfgang Denk <wd@denx.de>
18477 Date: Thu Jul 31 17:02:14 2008 +0200
18479 TQM85xx: fix typo introduce by commit ffbb5cb9
18481 Signed-off-by: Wolfgang Denk <wd@denx.de>
18483 commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
18484 Author: Wolfgang Denk <wd@denx.de>
18485 Date: Thu Jul 31 15:27:01 2008 +0200
18487 mvbc_p board: fix most build warnings.
18489 Signed-off-by: Wolfgang Denk <wd@denx.de>
18491 commit c4ec6db074051d2f6fc76a66411c60621b22bc02
18492 Author: Wolfgang Denk <wd@denx.de>
18493 Date: Thu Jul 31 13:57:20 2008 +0200
18495 E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
18497 Avoid "integer constant is too large for 'long' type" warnings.
18498 And simplify the code.
18500 Signed-off-by: Wolfgang Denk <wd@denx.de>
18502 commit 9196b44334c330cc13de2464c59181e4db71f549
18503 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
18504 Date: Wed Jul 30 23:21:19 2008 +0400
18506 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
18508 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
18510 commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
18511 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
18512 Date: Wed Jul 30 23:20:32 2008 +0400
18514 PPC: Add pci_clk in the global_data for CPM2 processors
18516 This patch adds pci_clk field to the global_data structure for the
18517 processors which have CPM2 module in case the CONFIG_PCI is defined.
18519 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
18521 commit f0ff885ca64655bee6540eb8a25eed90b1152686
18522 Author: Kumar Gala <galak@kernel.crashing.org>
18523 Date: Wed Jul 30 14:13:30 2008 -0500
18525 mpc85xx: Update linker scripts for Freescale boards
18527 * Move to using absolute addressing always. Makes the scripts a bit more
18528 portable and common
18529 * Moved .bss after the end of the image. These allows us to have more
18530 room in the resulting binary image for code and data.
18531 * Removed .text object files that aren't really needed
18532 * Make sure _end is 4-byte aligned as the .bss init code expects this.
18533 (Its possible that the end of .bss isn't 4-byte aligned)
18535 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18537 commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
18538 Author: Kumar Gala <galak@kernel.crashing.org>
18539 Date: Wed Jul 30 08:01:15 2008 -0500
18541 Fix compile warnings in dlmalloc
18543 The origional code was using on odd reference to get to the first
18544 real element in av_[]. The first two elements of the array are
18545 not used for actual bins, but for house keeping. If we are more
18546 explicit about how use the first few elements we can get rid of the
18549 dlmalloc.c: In function 'malloc_extend_top':
18550 dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
18551 dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
18552 dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
18555 The logic of how this code came to be is:
18556 bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
18558 SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
18559 bin_at(0) = &(av_[0])
18561 Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
18563 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18565 commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
18566 Author: Stefan Roese <sr@denx.de>
18567 Date: Wed Jul 30 10:21:01 2008 +0200
18569 ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
18571 Signed-off-by: Stefan Roese <sr@denx.de>
18573 commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
18574 Author: Stefan Roese <sr@denx.de>
18575 Date: Wed Jul 30 09:59:51 2008 +0200
18577 cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
18579 A recent patch used '#if (CONFIG_CMD_USB)' instead of
18580 '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
18581 common/bootm.c compile again.
18583 Signed-off-by: Stefan Roese <sr@denx.de>
18584 Acked-by: Markus Klotzbuecher <mk@denx.de>
18586 commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
18587 Author: Kyungmin Park <kmpark@infradead.org>
18588 Date: Tue Jul 22 08:01:43 2008 +0900
18590 Remove unused I2C at apollon board
18592 There are no I2C devices on this board.
18594 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
18596 commit 3c95960e526b3b026da20201db64526f46faf14b
18597 Author: Wolfgang Denk <wd@denx.de>
18598 Date: Thu Jul 31 10:12:09 2008 +0200
18600 at91rm9200dk, csb637: fix NAND related build problems
18602 Tried fixing NAND support for the at91rm9200dk board; untested.
18603 Disabled NAND support in the csb637 board config file.
18605 Signed-off-by: Wolfgang Denk <wd@denx.de>
18607 commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
18608 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18609 Date: Wed Jul 30 12:39:28 2008 +0200
18611 ppc4xx: ML507: Environment in flash and MTD Support
18613 - Relocate the location of U-Boot in the flash
18614 - Save the environment in one sector of the flash memory
18617 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18618 Signed-off-by: Stefan Roese <sr@denx.de>
18620 commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
18621 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18622 Date: Tue Jul 29 17:16:10 2008 +0200
18624 ppc4xx: ML507: Use of get_ram_size in board ml507
18626 - Change suggested by WD
18628 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18629 Signed-off-by: Stefan Roese <sr@denx.de>
18631 commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
18632 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18633 Date: Mon Jul 21 20:30:07 2008 +0200
18635 ppc4xx: ML507: U-Boot in flash and System ACE
18637 This patch allows booting from FLASH the ML507 board by Xilinx.
18638 Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
18640 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18641 Signed-off-by: Stefan Roese <sr@denx.de>
18643 commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
18644 Author: Julien May <mailinglist@miromico.ch>
18645 Date: Mon Jun 23 13:57:52 2008 +0200
18647 Add support for the hammerhead (AVR32) board
18649 The Hammerhead platform is built around a AVR32 32-bit microcontroller
18650 from Atmel. It offers versatile peripherals, such as ethernet, usb
18651 device, usb host etc.
18653 The board also incooperates a power supply and is a Power over Ethernet
18654 (PoE) Powered Device (PD).
18656 Additonally, a Cyclone III FPGA from Altera is integrated on the board.
18657 The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
18658 DDR2 SDRAM interfaces, which will cover even the most exceptional need
18659 of memory bandwidth. Together with the onboard video decoder the board
18660 is ready for video processing.
18662 For more information see: http:///www.miromico.com/hammerhead
18664 Signed-off-by: Julien May <mailinglist@miromico.ch>
18665 [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
18666 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18668 commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
18669 Author: Kumar Gala <galak@kernel.crashing.org>
18670 Date: Tue Jul 29 12:23:49 2008 -0500
18672 fsl_i2c: Use timebase timer functions instead of get_timer()
18674 The current implementation of get_timer() is only really useful after we
18675 have relocated u-boot to memory. The i2c code is used before that as part
18676 of the SPD DDR setup.
18678 We actually have a bug when using the get_timer() code before relocation
18679 because the .bss hasn't been setup and thus we could be reading/writing
18680 a random location (probably in flash).
18682 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18684 commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
18685 Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
18686 Date: Tue Jul 29 14:49:31 2008 +0200
18688 Adder8xx: Fix CFG_MONITOR_LEN
18690 Due to increased space usage, U-Boot can no longer be stored in three sectors.
18691 The current U-Boot use just over three flash sectors (197k), and U-Boot will
18692 become corrupt after saving environment variables. This patch adds another 64k
18693 to CFG_MONITOR_LEN.
18695 Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
18697 commit a4c59ad4a21140550ada6f97690d2527c4146ce5
18698 Author: Kyungmin Park <kmpark@infradead.org>
18699 Date: Tue Jul 29 08:47:57 2008 +0900
18701 Add OneNAND IPL related files to gitignore
18703 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
18705 commit 8d87589e8e874df7120a3d9667f051bc33bac250
18706 Author: Rafal Jaworowski <raj@semihalf.com>
18707 Date: Mon Jul 28 20:38:25 2008 +0200
18709 API: Teach the storage layer about SATA and MMC options.
18711 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
18712 Acked-by: Rafal Jaworowski <raj@semihalf.com>
18714 commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
18715 Author: Rafal Jaworowski <raj@semihalf.com>
18716 Date: Mon Jul 28 20:37:48 2008 +0200
18718 API: Dump contents of sector 0 in the demo application.
18720 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
18721 Acked-by: Rafal Jaworowski <raj@semihalf.com>
18723 commit 13ca6305f2eba49c175f6370c35286141059c789
18724 Author: Rafal Jaworowski <raj@semihalf.com>
18725 Date: Mon Jul 28 20:37:10 2008 +0200
18727 API: Correct storage enumeration routine, other minor fixes in API storage area.
18729 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
18730 Acked-by: Rafal Jaworowski <raj@semihalf.com>
18732 commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
18733 Author: Rafal Jaworowski <raj@semihalf.com>
18734 Date: Mon Jul 28 20:36:19 2008 +0200
18736 API: Fix compilation warnings in api_examples/demo.c.
18738 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
18740 commit c14eefcc48212af2f3314809605698dd8393a90a
18741 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18742 Date: Sun Jul 27 17:09:43 2008 +0200
18744 Fix more printf() format warnings
18746 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18748 commit 936897d4d1365452bbbdf8430db5e7769ef08d38
18749 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18750 Date: Fri Jul 25 15:18:16 2008 +0200
18752 Fix remaining CFG_CMD_ define, ifdef and comments
18754 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18756 commit 5d1d00fb36005482e1803a00ddc46efa11d719af
18757 Author: Stefano Babic <sbabic@denx.de>
18758 Date: Fri Jul 25 08:57:40 2008 +0200
18760 Add include for config.h in command.h.
18762 Because the cmd_tbl_s structure depends on the configuration file, it
18763 must be assured that config.h is included before the structure is
18764 evaluated by the compiler. If this is not certain, it could happen
18765 that the compiler generates structures of different size, depending
18766 on the fact if the source file includes <config.h> before or after
18769 The effect is that u-boot crashes when tries to relocate the command
18770 table (for ppc) or try to access to the command table for other
18773 The problem can happen on board-depending commands. All general
18774 commands under /common are unaffected, because they include already
18775 config.h before command.h.
18777 Signed-off-by: Stefano Babic <sbabic@denx.de>
18779 commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
18780 Author: Scott Wood <scottwood@freescale.com>
18781 Date: Wed Jul 23 13:16:06 2008 -0500
18783 NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
18785 This fixes building out-of-tree.
18787 Signed-off-by: Scott Wood <scottwood@freescale.com>
18789 commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
18790 Author: Heiko Schocher <hs@denx.de>
18791 Date: Wed Jul 23 07:30:46 2008 +0200
18793 Fix warnings if compiling with IDE support.
18795 cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
18796 cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
18798 Signed-off-by: Heiko Schocher <hs@denx.de>
18800 commit 7610db17fd4d59c51d825488526d85ede2f06767
18801 Author: Adrian Filipi <adrian.filipi@eurotech.com>
18802 Date: Tue Jul 22 14:28:11 2008 -0400
18804 Removed support for the adsvix board.
18806 Support for the adsvix was originally provided by Applied Data
18807 Systems (ADS), inc., now EuroTech, Inc.
18808 The board never shipped aside from some sample boards.
18810 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
18812 commit f96b44cef897bd372beb86dde1b33637c119d84d
18813 Author: Remy Bohmer <linux@bohmer.net>
18814 Date: Tue Jul 22 16:22:11 2008 +0200
18816 ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
18818 If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
18819 never set, because relocation to RAM is actually never done by U-boot
18820 itself. However, several pieces of code check if this flag is set at
18823 So, to make sure this flag is set on boards skipping relocation, this
18824 is added to the initialisation of U-boot at a moment where it is safe
18827 Signed-off-by: Remy Bohmer <linux@bohmer.net>
18829 commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
18830 Author: Timur Tabi <timur@freescale.com>
18831 Date: Mon Jul 21 14:26:23 2008 -0500
18833 fsl-i2c: fix writes to data segment before relocation
18835 Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
18836 relocation. Commit d8c82db4 added the ability for i2c_init() to program the
18837 I2C bus speed and save the value in i2c_bus_speed[], which is a global
18838 variable. It is an error to write to the data segment before relocation,
18839 which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
18841 Signed-off-by: Timur Tabi <timur@freescale.com>
18843 commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
18844 Author: Wolfgang Ocker <weo@reccoware.de>
18845 Date: Mon Jul 28 16:56:51 2008 +0200
18847 mips: Fix baudrate divisor computation on alchemy cpus
18849 Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
18852 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
18853 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18855 commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
18856 Author: Ben Warren <biggerbadderben@gmail.com>
18857 Date: Sat Jul 5 00:08:48 2008 -0700
18859 Moved initialization of AVR32 Ethernet controllers to board_eth_init()
18861 Renamed initialization functions for atngw100 and atstk1000.
18862 Removed initializations for these boards from net/eth.c
18864 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18865 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18867 commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
18868 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18869 Date: Wed Jul 23 10:55:46 2008 +0200
18871 spi flash: Fix printf() format warnings
18873 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18875 commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
18876 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18877 Date: Wed Jul 23 10:55:31 2008 +0200
18879 atmel_mci: Fix printf() format warnings
18881 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18883 commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
18884 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18885 Date: Wed Jul 23 10:55:15 2008 +0200
18887 avr32: Fix printf() format warnings
18889 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18891 commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
18892 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18893 Date: Wed Jul 23 10:52:19 2008 +0200
18895 avr32: asm/io.h needs asm/types.h
18897 map_physmem() takes a phys_addr_t as parameter. This type is defined in
18898 asm/types.h, so we need to include that file.
18900 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
18902 commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
18903 Author: Michal Simek <monstr@monstr.eu>
18904 Date: Thu Jul 17 12:25:46 2008 +0200
18906 microblaze: Fix printf() format issues
18908 Signed-off-by: Michal Simek <monstr@monstr.eu>
18910 commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
18911 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
18912 Date: Thu Jul 17 07:27:51 2008 +0530
18914 Remove unused code from lib_arm/bootm.c
18916 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
18918 commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
18919 Author: Detlev Zundel <dzu@denx.de>
18920 Date: Wed Jul 16 18:56:45 2008 +0200
18922 tqm85xx: Demystify 'DK: !!!' comment
18924 Signed-off-by: Detlev Zundel <dzu@denx.de>
18926 commit b2f44ba570f3a01113bbb745daf46f3858d22f53
18927 Author: Detlev Zundel <dzu@denx.de>
18928 Date: Wed Jul 16 18:56:44 2008 +0200
18930 83xx/85xx/86xx: Add LTEDR local bus definitions
18932 Signed-off-by: Detlev Zundel <dzu@denx.de>
18934 commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
18935 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18936 Date: Wed Jul 16 16:22:32 2008 +0200
18938 serial_xuartlite.c: fix compiler warnings
18940 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18941 Acked-by: Grant Likely <grant.likely@secretlab.ca>
18943 commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
18944 Author: Stefan Roese <sr@denx.de>
18945 Date: Fri Jul 18 11:03:35 2008 +0200
18947 POST: Add disable interrupts in some of the missing CPU POST tests
18949 Some CPU POST tests did not disable the interrupts while running. This
18950 seems to be necessary to protect this self modifying code.
18952 Signed-off-by: Stefan Roese <sr@denx.de>
18954 commit 97a3bf268d096e0e97e54048448c35114edcf557
18955 Author: Stefan Roese <sr@denx.de>
18956 Date: Fri Jul 18 10:43:24 2008 +0200
18958 ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
18960 This is needed for boards that define CFG_64BIT_STRTOUL but don't define
18963 Signed-off-by: Stefan Roese <sr@denx.de>
18965 commit 0043ac55024963295fc79b39af85b6dc3b261e17
18966 Author: Niklaus Giger <niklaus.giger@netstal.com>
18967 Date: Fri Jul 18 11:22:23 2008 +0200
18969 POST PPC4xx/spr IVPR only if PPC440
18971 The SPR IVPR register is only present (as far as I know) for
18972 processors with a PPC440 core.
18974 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
18975 Acked-by: Stefan Roese <sr@denx.de>
18977 commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
18978 Author: Stefan Roese <sr@denx.de>
18979 Date: Fri Jul 18 10:42:29 2008 +0200
18981 ppc4xx: Enable 64bit printf format on 440/460 platforms
18983 This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
18984 440/460 platforms. This may be needed since those platforms support
18985 36bit physical address space.
18987 Signed-off-by: Stefan Roese <sr@denx.de>
18989 commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
18990 Author: Stefan Roese <sr@denx.de>
18991 Date: Fri Jul 18 15:57:23 2008 +0200
18993 ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
18995 This patch fixes a problem with incorrect MODTx (On Die Termination)
18996 setup for a configuration with multiple DIMM's and multiple ranks.
18997 Without this change Katmai was unable to boot Linux with DDR2 frequency
18998 >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
18999 with DDR2 frequency = 640MHz and mem=4GB.
19001 Signed-off-by: Stefan Roese <sr@denx.de>
19003 commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
19004 Author: Stefan Roese <sr@denx.de>
19005 Date: Fri Jul 18 12:24:41 2008 +0200
19007 ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
19009 Signed-off-by: Stefan Roese <sr@denx.de>
19011 commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
19012 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19013 Date: Thu Jul 17 12:47:09 2008 +0200
19015 ppc4xx: ML507 Board Support
19017 The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
19019 -Virtex 5 FX FPGA (With a ppc440x5 in it)
19024 -Serial ATA connectors
19025 -RS232 Level Conversors
19026 -Ethernet Transceiver
19028 This patch gives support to a standard design produced by EDK for this
19029 board: ppc440, uartlite, xilinx_int and flash
19031 - Includes Changes propossed by Stefan Roese and Michal Simek
19033 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19034 Acked-by: Stefan Roese <sr@denx.de>
19036 commit d865fd09809a3a18669f35f970781820af40e4de
19037 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19038 Date: Thu Jul 17 11:44:12 2008 +0200
19040 ppc4xx: CPU PPC440x5 on Virtex5 FX
19042 -This patchs gives support for the embbedded ppc440
19043 on the Virtex5 FPGAs
19044 -interrupts.c divided in uic.c and interrupts.c
19045 -xilinx_irq.c for xilinx interrupt controller
19046 -Include modifications propossed by Stefan Roese
19048 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19049 Acked-by: Stefan Roese <sr@denx.de>
19051 commit 340ccb260f21516be360745d5c5e3bd0657698df
19052 Author: Sebastian Siewior <bigeasy@linutronix.de>
19053 Date: Wed Jul 16 20:04:49 2008 +0200
19055 cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
19057 This got broken by commits 93c56f212c
19058 [cfi_flash: support of long cmd in U-boot.]
19060 That command needs to be in little endian format on BE machines
19061 with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
19062 gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
19063 the cmdbuf in case portwidth = chipwidth = 8bit.
19065 Cc: Alexey Korolev <akorolev@infradead.org>
19066 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
19067 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
19069 commit 11188d55bc16dd907451c00282e00a038f73dd62
19070 Author: Stefan Roese <sr@denx.de>
19071 Date: Thu Jul 17 10:40:51 2008 +0200
19073 ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
19075 Signed-off-by: Stefan Roese <sr@denx.de>
19077 commit 021f6df6e96af5b387810cf96d24848da1faa55c
19078 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
19079 Date: Thu Jul 10 17:20:51 2008 +0400
19081 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
19083 The thinko was quite silly indeed, I messed with !ptr. Normally this
19084 would trigger some fault, but in U-Boot NULL pointer is equal to phys
19085 0, so the code was working still, just didn't actually test mpc8315erdb
19086 environment variable value. Heh.
19088 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
19089 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19091 commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
19092 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
19093 Date: Tue Jul 8 21:00:04 2008 +0400
19095 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
19097 Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
19098 support, or without TSEC1 but with USB ULPI PHY support in addition.
19099 With this patch user can specify desired USB PHY.
19101 Also, it seems that we can't distinguish the two boards in software, so
19102 user have to set `mpc8315erdb' environment variable to either 'tsec1'
19103 (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
19104 Linux will not probe for TSEC1.
19106 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
19107 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19109 commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
19110 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
19111 Date: Tue Jul 8 20:59:43 2008 +0400
19113 fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
19115 Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
19116 MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
19117 (connected to the four-ports hub, usb host only).
19119 This patch implements support for passing Dual-Role USB controller's
19120 device tree property phy_type through the usb_phy_type environment
19123 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
19124 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
19125 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19127 commit 699f05125509249072a0b865c8d35520d97cd501
19128 Author: Wolfgang Denk <wd@denx.de>
19129 Date: Tue Jul 15 22:22:44 2008 +0200
19131 Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
19133 Signed-off-by: Wolfgang Denk <wd@denx.de>
19135 commit bcab74baa6b1b1c969038ab6f64a186239180405
19136 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19137 Date: Tue Jul 15 11:23:02 2008 -0400
19139 Round the serial port clock divisor value returned by calc_divisor()
19141 Round the serial port clock divisor value returned by
19144 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19145 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
19147 commit 0328ef0edfe950f0b7b8b368dae482531506b74a
19148 Author: Robin Getz <rgetz@blackfin.uclinux.org>
19149 Date: Tue Jul 15 21:44:46 2008 +0200
19151 Fix DHCP protocol so U-Boot does not respond too early
19152 on the network with it's offered IP number; it should not reply until
19153 after it has received a DHCP ACK message. Also ensures that U-Boot
19154 does it's DHCPREQUEST as broadcast (per RFC 2131).
19156 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
19157 Acked-by: Ben Warren <biggerbadderben@gmail.com>
19158 Signed-off-by: Wolfgang Denk <wd@denx.de>
19160 commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
19161 Author: Sebastian Siewior <bigeasy@linutronix.de>
19162 Date: Tue Jul 15 13:35:23 2008 +0200
19164 cfi_flash: make the command u32 only
19166 This got changed by commit 93c56f212c
19167 [cfi_flash: support of long cmd in U-boot.]
19169 Long is the wrong type because it will behave differently on 64bit
19170 machines in a way that is probably not expected. u32 should be
19173 Cc: Alexey Korolev <akorolev@infradead.org>
19174 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
19175 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
19177 commit 31cfe57491b183acae575d486729e158f016c27b
19178 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19179 Date: Mon Jul 14 23:48:41 2008 +0200
19181 tools/gitignore: update to all generated files
19183 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19185 commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
19186 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
19187 Date: Wed Jul 9 18:30:44 2008 +0200
19189 mpc5xxx: Add MVBC_P board support
19191 The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
19192 controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
19194 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
19195 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19197 commit e2d31fb3450653115452144363d5bde4e5e3e693
19198 Author: Timur Tabi <timur@freescale.com>
19199 Date: Thu Jun 19 17:56:11 2008 -0500
19201 Update Freescale sys_eeprom.c to handle CCID formats
19203 Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
19204 NXID format replaces the older CCID format, but it's important to support both
19205 since most boards out there still use the CCID format. This change is in
19206 preparation for using one file to handle both formats. This will also unify
19207 EEPROM support for all Freescale 85xx and 86xx boards.
19209 Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
19210 instead of ID_EEPROM_ADDR.
19212 Signed-off-by: Timur Tabi <timur@freescale.com>
19214 commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
19215 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19216 Date: Fri Jul 11 17:22:43 2008 +0900
19218 pci: sh: Add pci_skip_dev and pci_print_dev function
19220 Add function of new PCI, pci_skip_dev and pci_print_dev.
19222 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19223 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19225 commit 1107014e835ec9d46c0333f4211d104f77442db0
19226 Author: Andy Fleming <afleming@freescale.com>
19227 Date: Mon Jul 14 20:29:07 2008 -0500
19229 Clean up INIT_RAM options
19231 The L2_INIT_RAM option was unused, and recent changes to the TLB code
19232 meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
19233 the amount of mapped space attached to nothing, we change things so the TLBs
19236 Signed-off-by: Andy Fleming <afleming@freescale.com>
19238 commit 4524561820a9327e89107854b3a7187800ccf719
19239 Author: Andy Fleming <afleming@freescale.com>
19240 Date: Mon Jul 14 20:26:57 2008 -0500
19242 Remove fake flash bank from 8544 DS
19244 The fake flash bank was generating errors for anyone who didn't have a
19245 PromJET hooked up to the board. As that constitutes the vast majority of
19246 users, we remove it.
19248 Signed-off-by: Andy Fleming <afleming@freescale.com>
19250 commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
19251 Author: Kumar Gala <galak@kernel.crashing.org>
19252 Date: Mon Jul 14 14:07:03 2008 -0500
19254 MPC8544DS: Add ATI Video card support
19256 Add support for using a PCIe ATI Video card on PCIe2.
19258 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19260 commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
19261 Author: Kumar Gala <galak@kernel.crashing.org>
19262 Date: Mon Jul 14 14:07:02 2008 -0500
19264 85xx: Add some L1/L2 SPR register definitions
19266 Add new L1/L2 SPRs related to e500mc cache config and control.
19268 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19270 commit e5852787f0c3c442a276262f13d91ca450605ac0
19271 Author: Kumar Gala <galak@kernel.crashing.org>
19272 Date: Mon Jul 14 14:07:01 2008 -0500
19274 MPC8544DS: Report board id, board version and fpga version.
19276 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19278 commit 73f15a060f67a2462551c334215bd20fac6b81d1
19279 Author: Kumar Gala <galak@kernel.crashing.org>
19280 Date: Mon Jul 14 14:07:00 2008 -0500
19282 85xx: Cleanup L2 cache size detection
19284 The L2 size detection code was a bit confusing and we kept having to add
19285 code to it to handle new processors. Change the sense of detection so we
19286 look for the older processors that aren't changing.
19288 Also added support for 1M cache size on 8572.
19290 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19292 commit c3ca7e5e00a24451f20df3bded9a61ba541921df
19293 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19294 Date: Fri Jul 11 15:33:08 2008 -0400
19296 sbc8560: enable CONFIG_OF_LIBFDT by default
19298 Make the default build for the sbc8560 board be powerpc
19299 capable with libfdt support.
19301 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19303 commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
19304 Author: Andy Fleming <afleming@freescale.com>
19305 Date: Mon Jul 14 20:04:40 2008 -0500
19307 Fix indentation for default boot environment variables
19309 This was proposed by Paul Gortmaker in response to Wolfgang's comments on
19310 similar #defines in sbc8560.h.
19312 Signed-off-by: Andy Fleming <afleming@freescale.com>
19314 commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
19315 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19316 Date: Fri Jul 11 15:33:07 2008 -0400
19318 sbc8560: add default fdt values
19320 Add in the default fdt settings and the typical EXTRA_ENV
19321 settings as borrowed from the mpc8560ads. Fix a couple
19322 of stale references to the mpc8560ads dating back to the
19323 original clone/fork.
19325 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19326 Signed-off-by: Andy Fleming <afleming@freescale.com>
19328 commit d04e76edf92f7f89696989e8702b97e020455af3
19329 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19330 Date: Fri Jul 11 15:33:06 2008 -0400
19332 sbc8560: add in ft_board_setup()
19334 Add in for the sbc8560, the ft_board_setup() routine, based on what is
19335 in use for the Freescale MPC8560ADS board.
19337 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19339 commit c158bcaca3b31cbe38c4143812e6170e38a57393
19340 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19341 Date: Fri Jul 11 15:33:05 2008 -0400
19343 sbc8560: define eth0 and eth1 instead of eth1 and eth2
19345 The existing config doesn't define CONFIG_HAS_ETH0, and so the
19346 fdt support doesn't update the zeros in the dtb local-mac with
19347 real data from the u-boot env. Since the existing config is
19348 tailored to just two interfaces, get rid of the ETH2 definitions
19351 Also don't include any end user specific data into the environment
19352 by default -- things like MAC address, network parameters etc. need
19353 to come from the end user.
19355 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19356 Signed-off-by: Andy Fleming <afleming@freescale.com>
19358 commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
19359 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19360 Date: Fri Jul 11 15:33:04 2008 -0400
19362 sbc8560: properly set cs0_bnds for 512MB
19364 The sbc8560 board ships with 512MB of memory installed,
19365 but the current cs0_bnds is hard coded for 256MB. Set the
19366 value based on CFG_SDRAM_SIZE.
19368 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19370 commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
19371 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19372 Date: Fri Jul 11 15:33:03 2008 -0400
19374 sbc8560: proper definitions for TSEC.
19376 The definitions for the TSEC have become out of date. There is no
19377 longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
19378 Update to match those of other boards, like the MPC8560ADS.
19380 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19381 Acked-by: Ben Warren <biggerbadderben@gmail.com>
19383 commit 71074abbe0c76429577aff58aeff0a24ad210b23
19384 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19385 Date: Wed Jul 9 13:23:05 2008 -0400
19387 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
19389 Some boards that have external 16550 UARTs don't have a direct
19390 tie between bi_busfreq and the clock used for the UARTs. Boards
19391 that do have such a tie should set CFG_NS16550_CLK to be
19392 get_bus_freq(0) -- which most of them do already.
19394 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
19395 Acked-by: Kim Phillips <kim.phillips@freescale.com>
19397 commit 24ef76f320fbadf074105229826514db140f939f
19398 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
19399 Date: Wed Jul 2 07:03:53 2008 -0700
19401 Change the temp map to ROM to align addresses to page size.
19403 With a page size of BOOKE_PAGESZ_16M, both the real and effective
19404 addresses must be multiples of 16MB. The hardware silently truncates
19405 them so the code happens to work. This patch clarifies the situation
19406 by establishing addresses that the hardware doesn't need to truncate.
19408 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
19409 Signed-off-by: Andy Fleming <afleming@freescale.com>
19411 commit 06b4186c10204b6683edb047ac5f506fb0ce0937
19412 Author: Kim Phillips <kim.phillips@freescale.com>
19413 Date: Tue Jun 17 17:45:22 2008 -0500
19415 mpc85xx: use IS_E_PROCESSOR macro
19417 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19419 commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
19420 Author: Kim Phillips <kim.phillips@freescale.com>
19421 Date: Mon Jun 16 15:55:53 2008 -0500
19423 fdt: add crypto node handling for MPC8{3, 5}xxE processors
19425 Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
19426 check rev and up-rev crypto node (to SEC rev. 2.4 property values)
19427 if on an 'EA' processor, e.g. MPC8349EA.
19429 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19431 commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
19432 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19433 Date: Fri Jul 11 15:10:11 2008 -0400
19435 ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
19437 ARM DaVinci: Remove extern phy_t declaration by moving
19438 code to proper place.
19440 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19442 commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
19443 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19444 Date: Fri Jul 11 15:10:10 2008 -0400
19446 ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
19448 ARM DaVinci: Remove duplicate definitions of MACH_TYPE
19449 and prototype of i2c_init().
19451 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19453 commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
19454 Author: Kumar Gala <galak@kernel.crashing.org>
19455 Date: Mon Jul 14 14:03:02 2008 -0500
19457 Fix some more printf() format problems.
19459 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19461 commit 45b16d22c64674ccd8c4637456a987463609141c
19462 Author: Wolfgang Denk <wd@denx.de>
19463 Date: Mon Jul 14 22:38:42 2008 +0200
19465 Fix coding style; make code better parsable by external tools
19467 Signed-off-by: Wolfgang Denk <wd@denx.de>
19469 commit b880cbf207b1c109d3a661417a8feddcbd729a9d
19470 Author: Wolfgang Denk <wd@denx.de>
19471 Date: Mon Jul 14 21:19:08 2008 +0200
19473 cpu/i386/serial.c: Fix syntax errors
19475 Signed-off-by: Wolfgang Denk <wd@denx.de>
19477 commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
19478 Author: Wolfgang Denk <wd@denx.de>
19479 Date: Mon Jul 14 20:41:35 2008 +0200
19481 elppc board: Coding style cleanup.
19483 Signed-off-by: Wolfgang Denk <wd@denx.de>
19485 commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
19486 Author: Wolfgang Denk <wd@denx.de>
19487 Date: Mon Jul 14 20:40:22 2008 +0200
19489 elppc board: fix syntax error.
19491 Signed-off-by: Wolfgang Denk <wd@denx.de>
19493 commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
19494 Author: Wolfgang Denk <wd@denx.de>
19495 Date: Mon Jul 14 20:38:26 2008 +0200
19497 EB+MCF-EV123 board: fix coding style (alingment)
19499 Signed-off-by: Wolfgang Denk <wd@denx.de>
19501 commit 6841785a0bb0f38175456a923edd634fb7dd6947
19502 Author: Wolfgang Denk <wd@denx.de>
19503 Date: Mon Jul 14 20:36:44 2008 +0200
19505 EB+MCF-EV123 board: fix syntx error
19507 Signed-off-by: Wolfgang Denk <wd@denx.de>
19509 commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
19510 Author: Andy Fleming <afleming@freescale.com>
19511 Date: Mon Jul 7 18:02:08 2008 -0500
19513 Remove LBC_CACHE_BASE from 8544 DS
19515 The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
19516 space for some anyway, we were allowing speculative loads into unmapped space,
19517 which would cause an exception (annoying, even if ultimately harmless).
19518 Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
19521 Signed-off-by: Andy Fleming <afleming@freescale.com>
19523 commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
19524 Author: Wolfgang Denk <wd@denx.de>
19525 Date: Mon Jul 14 15:19:07 2008 +0200
19527 Code cleanup: fix old style assignment ambiguities like "=-" etc.
19529 Signed-off-by: Wolfgang Denk <wd@denx.de>
19531 commit d7854223c5c85b5849fbf422cc8ac0efef461c37
19532 Author: Wolfgang Denk <wd@denx.de>
19533 Date: Mon Jul 14 15:10:53 2008 +0200
19535 AmigaOneG3SE: remove dead and incomplete files
19537 Signed-off-by: Wolfgang Denk <wd@denx.de>
19539 commit b64f190b7a34224df09b559ca111eb1b733f00ad
19540 Author: Wolfgang Denk <wd@denx.de>
19541 Date: Mon Jul 14 15:06:35 2008 +0200
19543 Fix printf() format issues with sizeof_t types by using %zu
19545 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19546 Signed-off-by: Wolfgang Denk <wd@denx.de>
19548 commit f354b73e16a86f9e9085471a830605f74f84ea5d
19549 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19550 Date: Mon Jul 14 14:11:45 2008 +0200
19552 vsprintf: add z and t options
19554 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19556 commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
19557 Author: Wolfgang Denk <wd@denx.de>
19558 Date: Sun Jul 13 23:07:35 2008 +0200
19560 Fix some more printf() format issues.
19562 Signed-off-by: Wolfgang Denk <wd@denx.de>
19564 commit d5996dd555edf52721b7691a4c59de016251ed39
19565 Author: Wolfgang Denk <wd@denx.de>
19566 Date: Sun Jul 13 19:51:00 2008 +0200
19568 Fix some more printf() format problems.
19570 Signed-off-by: Wolfgang Denk <wd@denx.de>
19572 commit 0f9d5f6d6e814907794995c6a22af752040c35d9
19573 Author: Wolfgang Denk <wd@denx.de>
19574 Date: Sun Jul 13 19:48:26 2008 +0200
19576 ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
19578 Signed-off-by: Wolfgang Denk <wd@denx.de>
19580 commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
19581 Author: Anatolij Gustschin <agust@denx.de>
19582 Date: Sat Jul 12 17:31:36 2008 +0200
19584 Fix bug in Lime video driver
19586 We need to wait while drawing engine clears frame
19587 buffer before any further software accesses to frame
19588 buffer will be initiated. Otherwise software drawn
19589 parts could be partially destroyed by the drawing
19590 engine or even GDC chip freeze could occur (as
19591 observed on socrates board).
19593 Signed-off-by: Anatolij Gustschin <agust@denx.de>
19595 commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
19596 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19597 Date: Sat Jul 12 14:36:34 2008 +0200
19599 Fix some more printf() format issues.
19601 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19603 commit 18c8a28aad49803780bd8d52432ded528e37e701
19604 Author: Michal Simek <monstr@monstr.eu>
19605 Date: Fri Jul 11 15:11:57 2008 +0200
19607 hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
19609 Signed-off-by: Michal Simek <monstr@monstr.eu>
19610 Acked-by: Stefan Roese <sr@denx.de>
19612 commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
19613 Author: Michal Simek <monstr@monstr.eu>
19614 Date: Fri Jul 11 11:50:53 2008 +0200
19616 hwmon: Cleaning hwmon devices
19619 Move device specific values to driver for better reading
19621 Signed-off-by: Michal Simek <monstr@monstr.eu>
19622 Acked-by: Stefan Roese <sr@denx.de>
19624 commit c78fce699c7ff467ecd841da6a79f065180bf578
19625 Author: Michal Simek <monstr@monstr.eu>
19626 Date: Fri Jul 11 10:43:13 2008 +0200
19628 FIS: repare incorrect return value with ramdisk handling
19630 Microblaze and PowerPC use boot_get_ramdisk for loading
19631 ramdisk to memory with checking return value.
19632 Return 0 means success. Return 1 means failed.
19633 Here is correspond part of code from bootm.c which check
19636 ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
19637 &rd_data_start, &rd_data_end);
19641 Signed-off-by: Michal Simek <monstr@monstr.eu>
19643 commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
19644 Author: Michal Simek <monstr@monstr.eu>
19645 Date: Fri Jul 11 10:10:32 2008 +0200
19647 microblaze: Remove useless ancient headers
19649 Signed-off-by: Michal Simek <monstr@monstr.eu>
19651 commit 53ea981c3124b13c137c2d10e975b7c6672266e0
19652 Author: Michal Simek <monstr@monstr.eu>
19653 Date: Fri Jul 11 10:10:31 2008 +0200
19655 microblaze: Clean uartlite driver
19657 Redesign uartlite driver to in_be32 and out_be32 macros
19658 Fix missing header in io.h
19660 Signed-off-by: Michal Simek <monstr@monstr.eu>
19661 Acked-by: Grant Likely <grant.likely@secretlab.ca>
19663 commit dbf3dfb386a2d5d2381814e39985ab2e21894550
19664 Author: Marcel Ziswiler <marcel@ziswiler.com>
19665 Date: Fri Jul 11 02:39:14 2008 +0200
19667 Enable passing of ATAGs required by latest Linux kernel.
19669 commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
19670 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19671 Date: Fri Jul 11 10:24:15 2008 -0400
19673 Fix integer overflow warning in calc_divisor()
19675 which happened when rounding the serial port clock divisor
19677 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19679 commit 6b760189d77f001684e3160b355c185ca3804961
19680 Author: Marcel Ziswiler <marcel@ziswiler.com>
19681 Date: Fri Jul 11 01:09:59 2008 +0200
19683 Fix build time warnings in function mmc_decode_csd()
19685 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
19687 commit c15947d6ce0d59925c97fdfac692476af6e262d0
19688 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19689 Date: Thu Jul 10 10:46:33 2008 -0400
19691 ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
19693 caused by missing dcache status/enable/disable functions.
19695 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19697 commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
19698 Author: Stefan Roese <sr@denx.de>
19699 Date: Thu Jul 10 13:53:31 2008 +0200
19701 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
19703 This patch removes some ft_board_setup() functions from some 4xx boards.
19704 This can be done since we now have a default weak implementation for this
19705 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
19706 implementation like canyonlands need their own version.
19708 Signed-off-by: Stefan Roese <sr@denx.de>
19710 commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
19711 Author: Wolfgang Denk <wd@denx.de>
19712 Date: Sun Jul 13 14:58:16 2008 +0200
19714 Add last known maintainer for orphaned boards; reformat.
19716 Signed-off-by: Wolfgang Denk <wd@denx.de>
19718 commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
19719 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19720 Date: Thu Jul 10 13:16:04 2008 +0200
19722 Remove kharris@nexus-tech.net from MAINTAINERS
19724 Mail to kharris@nexus-tech.net bounces because the user doesn't exist
19725 anymore. You can't be a maintainer without a valid e-mail address, so
19726 move all boards that used to be maintained by Kyle Harris to the
19729 Currently, only PowerPC has a list of orphaned boards, so this patch
19730 creates one for ARM as well.
19732 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19734 commit 17bd17071463b0cde391ac4a0863d600474b4ea1
19735 Author: Anatolij Gustschin <agust@denx.de>
19736 Date: Thu Jul 10 01:15:10 2008 +0200
19738 at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
19740 On the at91sam9260ep development board there is an EEPROM
19741 connected to the TWI interface (PA23, PA24 Peripheral A
19742 multiplexing), so we cannot use these pins as ETX2, ETX3.
19743 This patch configures PA10, PA11 pins for ETX2, ETX3
19744 instead of PA23, PA24 pins.
19746 Signed-off-by: Anatolij Gustschin <agust@denx.de>
19747 Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
19749 commit f889265753ddf4465d9d580827bb9289bfac55d6
19750 Author: Kenneth Johansson <kenneth@southpole.se>
19751 Date: Sat Jul 12 13:18:34 2008 -0600
19753 fix DIU for small screens
19755 The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
19756 so it was not possible to set a slow pixel clock and thus prevented
19757 display on small screens.
19759 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
19760 Acked-by: John Rigby <jrigby@freescale.com>
19762 commit b60b8573875e650e4c69be667bfc88d3ed474a7c
19763 Author: John Rigby <jrigby@freescale.com>
19764 Date: Fri Jul 11 14:44:09 2008 -0600
19766 ADS5121 cleanup compile warnings
19768 board/ads5121/iopin.c
19769 Replace bit fields in struct iopin_t with a single
19770 field and intialize it via plain old macros.
19771 This fixes the type pun warnings and makes the code
19774 board/ads5121/ads5121.c
19775 Add include iopin.h to ads5121.c for the iopin_initialize
19778 Add an extern void ads5121_diu_init(void)
19780 Signed-off-by: John Rigby <jrigby@freescale.com>
19782 commit bde63587622c4b830a27d1ddf7265843de9e994f
19783 Author: Wolfgang Denk <wd@denx.de>
19784 Date: Fri Jul 11 22:56:11 2008 +0200
19786 Fix some more printf() format issues.
19788 Signed-off-by: Wolfgang Denk <wd@denx.de>
19790 commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
19791 Author: Wolfgang Denk <wd@denx.de>
19792 Date: Fri Jul 11 22:55:31 2008 +0200
19794 Fixed some out-of-tree build issues
19796 Signed-off-by: Wolfgang Denk <wd@denx.de>
19798 commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
19799 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19800 Date: Wed Jul 9 16:20:23 2008 -0500
19802 ColdFire: Fix FB CS not setup properly for Mcf5282
19804 Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
19805 CFG_CSn_RO is defined as 0, the chipselect will not
19808 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19810 commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
19811 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19812 Date: Wed Jul 9 15:47:27 2008 -0500
19814 ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
19816 Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
19817 clock module in cpu/<cf arch>/cpu_init.c
19819 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19821 commit f94945b517f10e01927101679c62361e03d4e837
19822 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19823 Date: Wed Jul 9 15:25:01 2008 -0500
19825 ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
19827 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19829 commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
19830 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19831 Date: Wed Jul 9 15:21:44 2008 -0500
19833 Fix compile error caused by missing timer function
19835 Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
19837 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19839 commit c37ea031175b807c54e6bad9b270e9bede6c0078
19840 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19841 Date: Wed Jul 9 15:14:25 2008 -0500
19843 Fix compile error caused by incorrect function return type
19845 Rename int mii_init(void) to void mii_init(void)
19847 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19849 commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
19850 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19851 Date: Wed Jun 18 19:27:23 2008 -0500
19853 ColdFire: Fix power up issue for MCF5235
19855 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19857 commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
19858 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19859 Date: Wed Jun 18 19:19:07 2008 -0500
19861 ColdFire: Fix compiling error for MCF5275
19863 The compiling error was caused by missing a closed parentheses
19866 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19868 commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
19869 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19870 Date: Wed Jun 18 19:14:01 2008 -0500
19872 ColdFire: Fix timer issue for MCF5272
19874 The timer was assigned to wrong timer memory mapped which
19875 caused udelay() and timer() not working properly.
19877 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19879 commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
19880 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19881 Date: Wed Jun 18 19:12:13 2008 -0500
19883 ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
19885 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
19887 commit 8371dc2066136be21e10b7b9293e469297d77298
19888 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19889 Date: Wed Jun 18 19:05:23 2008 -0500
19891 ColdFire: Add -got=single param for new linux v4e toolchains
19893 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
19895 commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
19896 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19897 Date: Wed Jun 18 13:21:19 2008 -0500
19899 ColdFire: Fix code flash configuration for M547x/M548x boards
19901 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
19903 commit 6e37091afc07fdcc15590093fd066b0cb7399f85
19904 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19905 Date: Tue Jun 24 12:12:16 2008 -0500
19907 ColdFire: Fix warning messages by passing correct data type in board.c
19909 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19911 commit 81cc32322acb1b3225ee45606ced48e2a14824dc
19912 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19913 Date: Thu May 29 12:21:54 2008 -0500
19915 ColdFire: Fix UART baudrate formula
19917 The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
19918 can generate the wrong divisor due to integer division truncation.
19919 Round the calculated divisor value by adding 1/2 the baudrate
19920 before dividing by the baudrate.
19922 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19923 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
19925 commit b578fb471444cbd7db1285701ba51343baaf73fb
19926 Author: Stefan Roese <sr@denx.de>
19927 Date: Thu Jul 10 11:38:26 2008 +0200
19929 ppc4xx: Fix include sequence in 4xx_pcie.c
19931 This patch now moves common.h to the top of the inlcude list. This
19932 is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
19933 the phys_size_t/phys_addr_t are defined to the correct size in this
19936 Signed-off-by: Stefan Roese <sr@denx.de>
19938 commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
19939 Author: Stefan Roese <sr@denx.de>
19940 Date: Fri Jul 11 13:10:56 2008 +0200
19942 ppc4xx: Fix compile warning in 44x_spd_ddr2.c
19944 Signed-off-by: Stefan Roese <sr@denx.de>
19946 commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
19947 Author: Stefan Roese <sr@denx.de>
19948 Date: Fri Jul 11 11:40:13 2008 +0200
19950 ppc4xx: Fix small korat merge problem
19952 Signed-off-by: Stefan Roese <sr@denx.de>
19954 commit 1d0554736a0a1dd59718acda660871ce56b69e18
19955 Author: Stefan Roese <sr@denx.de>
19956 Date: Fri Jul 11 11:34:52 2008 +0200
19958 ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
19960 Signed-off-by: Stefan Roese <sr@denx.de>
19962 commit 3a82113ed5934d498f25080441a8261fc9454b15
19963 Author: Stefan Roese <sr@denx.de>
19964 Date: Thu Jul 10 16:37:09 2008 +0200
19966 ppc4xx: Add 460SX UIC defines
19968 Only the really needed ones are added (cascading and EMAC/MAL).
19970 Signed-off-by: Stefan Roese <sr@denx.de>
19972 commit 26173fc6f60521c2a8072f652f863617fc11ba9a
19973 Author: Stefan Roese <sr@denx.de>
19974 Date: Mon Jun 30 14:11:07 2008 +0200
19976 ppc4xx: Continue cleanup of ppc440.h
19978 This patch continues the ppc440.h cleanup by removing some of the unused
19981 Signed-off-by: Stefan Roese <sr@denx.de>
19983 commit d9056b7913ed6a228d2f33671d916efedee541dd
19984 Author: Stefan Roese <sr@denx.de>
19985 Date: Mon Jun 30 14:05:05 2008 +0200
19987 ppc4xx: Cleanup Katmai & Yucca PCIe register usage
19989 This patch cleans up the 440SPe PCIe register usage. Now only defines
19990 from the include/asm-ppc/4xx_pcie.h are used.
19992 Signed-off-by: Stefan Roese <sr@denx.de>
19994 commit 5de851403b01489b493fa83137ad990b8ce60d1c
19995 Author: Stefan Roese <sr@denx.de>
19996 Date: Thu Jun 26 17:36:39 2008 +0200
19998 ppc4xx: Rework 440GX UIC handling
20000 This patch reworks the 440GX interrupt handling so that the common 4xx
20001 code can be used. The 440GX is an exception to all other 4xx variants
20002 by having the cascading interrupt vectors not on UIC0 but on a special
20003 UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
20004 the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
20005 handling is simpler without any 440GX special cases.
20007 Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
20009 Signed-off-by: Stefan Roese <sr@denx.de>
20011 commit d1631fe1a05b063ccaf62ea892a8887b829847d1
20012 Author: Stefan Roese <sr@denx.de>
20013 Date: Thu Jun 26 13:40:57 2008 +0200
20015 ppc4xx: Consolidate PPC4xx UIC defines
20017 This 2nd patch now removes all UIC mask bit definition. They should be
20018 generated from the vectors by using the UIC_MASK() macro from now on.
20019 This way only the vectors need to get defined for new PPC's.
20021 Also only the really used interrupt vectors are now defined. This makes
20022 definitions for new PPC versions easier and less error prone.
20024 Another part of this patch is that the 4xx emac driver got a little
20025 cleanup, since now the usage of the interrupts is clearer.
20027 Signed-off-by: Stefan Roese <sr@denx.de>
20029 commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
20030 Author: Stefan Roese <sr@denx.de>
20031 Date: Wed Jun 25 10:59:22 2008 +0200
20033 ppc4xx: Consolidate PPC4xx UIC defines
20035 This patch is the first step to consolidate the UIC related defines in the
20036 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
20037 asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
20040 Signed-off-by: Stefan Roese <sr@denx.de>
20042 commit 7ee2619c20ccecd57966d74d844e6329e141261c
20043 Author: Stefan Roese <sr@denx.de>
20044 Date: Tue Jun 24 17:18:50 2008 +0200
20046 ppc4xx: Consolidate PPC4xx EBC defines
20048 This patch removes all EBC related defines from the PPC4xx headers
20049 ppc405.h and ppc440.h and introduces a new header
20051 include/asm-ppc/ppc4xx-ebc.h
20053 with all those defines.
20055 Signed-off-by: Stefan Roese <sr@denx.de>
20057 commit e321801bed5a6d896d298c00fd20046f039d5d66
20058 Author: Stefan Roese <sr@denx.de>
20059 Date: Thu Jul 10 13:52:44 2008 +0200
20061 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
20063 This patch removes some ft_board_setup() functions from some 4xx boards.
20064 This can be done since we now have a default weak implementation for this
20065 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
20066 implementation like canyonlands need their own version.
20068 Signed-off-by: Stefan Roese <sr@denx.de>
20070 commit 08250eb2edbd96514d049602d9e134110ac3185f
20071 Author: Stefan Roese <sr@denx.de>
20072 Date: Thu Jul 10 15:32:32 2008 +0200
20074 ppc4xx: Fix merge problems in 44x_spd_ddr2.c
20076 Signed-off-by: Stefan Roese <sr@denx.de>
20078 commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
20079 Author: Grant Erickson <gerickson@nuovations.com>
20080 Date: Tue Jul 8 08:35:00 2008 -0700
20082 ppc4xx: Add MII mode support to the EMAC RGMII Bridge
20084 This patch adds support for placing the RGMII bridge on the
20085 PPC405EX(r) into MII/GMII mode and allows a board-specific
20086 configuration to specify the bridge mode at compile-time.
20088 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
20089 Signed-off-by: Stefan Roese <sr@denx.de>
20091 commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
20092 Author: Grant Erickson <gerickson@nuovations.com>
20093 Date: Wed Jul 9 16:46:35 2008 -0700
20095 ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
20097 This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
20098 controller registers (MODT and INITPLR) used by the
20099 PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
20100 peer values used for the INITPLR MR and EMR registers,
20101 respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
20103 With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
20104 Kilauea are replaced by equivalent mnemonics to make it easier to
20105 compare and contrast other 405EX(r)-based boards (e.g. during board
20108 Finally, unified the SDRAM controller register dump routine such that
20109 it can be used across all processor variants that utilize the IBM DDR2
20110 SDRAM controller core. It produces output of the form:
20112 PPC4xx IBM DDR2 Register Dump:
20114 SDRAM_MB0CF[40] = 0x00006701
20117 which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
20118 since it is not uncommon that the DCR values in header files get mixed
20119 up and it helps to validate, at a glance, they match what is printed
20120 in the user manual.
20123 AMCC Kilauea/Haleakala:
20124 - NFS Linux Boot: PASSED
20125 - NAND Linux Boot: PASSED
20127 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
20128 Signed-off-by: Stefan Roese <sr@denx.de>
20130 commit ad7382d828982e9c1bafc4313ef1b666f6145f58
20131 Author: Grant Erickson <gerickson@nuovations.com>
20132 Date: Wed Jul 9 16:31:59 2008 -0700
20134 ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
20136 Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
20137 revision ID DCR based on 405EX, and add field mnemonics for bus error
20138 status and ECC error status registers.
20140 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
20141 Signed-off-by: Stefan Roese <sr@denx.de>
20143 commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
20144 Author: Grant Erickson <gerickson@nuovations.com>
20145 Date: Wed Jul 9 16:31:36 2008 -0700
20147 ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
20149 This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
20151 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
20152 Signed-off-by: Stefan Roese <sr@denx.de>
20154 commit 5b457d00730d4aa0c6450d21a9104723e606fb98
20155 Author: Grant Erickson <gerickson@nuovations.com>
20156 Date: Wed Jul 9 11:55:46 2008 -0700
20158 PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
20160 While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
20161 controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
20162 the 405EX(r), SDRAM_MCSTAT has a different DCR value.
20164 Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
20165 which causes SDRAM initialization to periodically fail since it can
20166 prematurely indicate SDRAM ready status.
20168 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
20169 Signed-off-by: Stefan Roese <sr@denx.de>
20171 commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
20172 Author: Feng Kan <fkan@amcc.com>
20173 Date: Tue Jul 8 22:48:42 2008 -0700
20175 ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
20177 Add AMCC Redwood reference board that uses the latest
20178 PPC 464 CPU processor combined with a rich mix of peripheral
20179 controllers. The board will support PCIe, mutiple Gig ethernet
20180 ports, advanced hardware RAID assistance and IEEE 1588.
20182 Signed-off-by: Feng Kan <fkan@amcc.com>
20183 Signed-off-by: Stefan Roese <sr@denx.de>
20185 commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
20186 Author: Feng Kan <fkan@amcc.com>
20187 Date: Tue Jul 8 22:48:07 2008 -0700
20189 ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
20191 Signed-off-by: Feng Kan <fkan@amcc.com>
20192 Signed-off-by: Stefan Roese <sr@denx.de>
20194 commit 7d30793685efcada183891c78fc892e6c9ba50c7
20195 Author: Feng Kan <fkan@amcc.com>
20196 Date: Tue Jul 8 22:47:31 2008 -0700
20198 ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
20200 Signed-off-by: Feng Kan <fkan@amcc.com>
20201 Signed-off-by: Stefan Roese <sr@denx.de>
20203 commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
20204 Author: Wolfgang Denk <wd@denx.de>
20205 Date: Fri Jul 11 01:16:00 2008 +0200
20207 Fix some more print() format errors.
20209 Signed-off-by: Wolfgang Denk <wd@denx.de>
20211 commit fdd70d1921b87287d9a99d1be99bc35226c2b412
20212 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20213 Date: Thu Jul 10 20:57:54 2008 +0200
20215 MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
20217 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20219 commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
20220 Author: Sergey Lapin <slapin@ossfans.org>
20221 Date: Thu Jun 5 11:06:29 2008 +0400
20223 DataFlash AT45DB021 support
20225 Some boards based on AT91SAM926X-EK use smaller DF chips to keep
20226 bootstrap, u-boot and its environment, using NAND or other external
20227 storage for kernel and rootfs. This patch adds support for
20228 small 1024x263 chip.
20230 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
20232 commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
20233 Author: Kim Phillips <kim.phillips@freescale.com>
20234 Date: Thu Jul 10 14:00:15 2008 -0500
20236 silence misc printf formatting compiler warnings
20238 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20240 commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
20241 Author: Markus Klotzbücher <mk@denx.de>
20242 Date: Thu Jul 10 14:47:09 2008 +0200
20244 USB: shutdown USB before booting
20246 This patch fixes a potentially serious issue related to USB which was
20247 discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
20248 ARM920T. Martin wrote:
20250 Turn off USB to prevent the host controller from writing to the
20251 SDRAM while Linux is booting. This could happen, because the HCCA
20252 (Host Controller Communication Area) lies within the SDRAM and the
20253 host controller writes continously to this area (as busmaster!), for
20254 example to increase the HccaFrameNumber variable, which happens
20257 This is a slightly modified version of the patch in order to shutdown
20258 USB when booting on all architectures.
20260 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
20262 commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
20263 Author: Martha Marx <mmarx@silicontkx.com>
20264 Date: Thu May 29 14:23:25 2008 -0400
20266 Configuration changes for ADS5121 Rev 3
20268 ADS5121 Rev 3 board is now the default config
20270 config targets are now
20275 M41T62 on board RTC
20278 ads5121_rev2_config
20283 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
20284 Acked-by: Grant Likely <grant.likely@secretlab.ca>
20285 Acked-by: John Rigby <jrigby@freescale.com>
20287 commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
20288 Author: Martha Marx <mmarx@silicontkx.com>
20289 Date: Thu May 29 15:37:21 2008 -0400
20291 Consolidate ADS5121 IO Pin configuration
20293 Consolidate ADS5121 IO Pin configuration to one file
20294 board/ads5121/iopin.c.
20296 Remove pin config from cpu/mpc512x/fec.c
20298 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
20299 Acked-by: Grant Likely <grant.likely@secretlab.ca>
20300 Acked-by: John Rigby <jrigby@freescale.com>
20302 commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
20303 Author: Christian Eggers <christian@p2400.wgnetz.xx>
20304 Date: Fri Jun 27 19:46:51 2008 +0200
20306 Fix "usb part" command
20308 Only print partition for selected device if user supplied the <dev>
20309 arg with the "usb part [dev]" command.
20311 Signed-off-by: Christian Eggers <ceggers@gmx.de>
20312 Acked-by: Markus Klotzbuecher <mk@denx.de>
20314 commit cc83b27217f7380041fea386ddb6d6d9b261617d
20315 Author: Harald Welte <laforge@gnumonks.org>
20316 Date: Mon Jul 7 00:58:05 2008 +0800
20318 fix USB devices with multiple configurations
20320 This patch fixes bugs in usbdcore*.c related to the use of devices
20321 with multiple configurations.
20323 The original code made mistakes about the meaning of configuration value and
20324 configuration index, and the resulting off-by-one errors resulted in:
20326 * SET_CONFIGURATION always selected the first configuration, no matter what
20327 wValue is being passed.
20328 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
20329 configuration (index 0).
20331 Signed-off-by: Harald Welte <laforge@openmoko.org>
20332 Acked-by: Markus Klotzbuecher <mk@denx.de>
20334 commit 06c53beae1a726e707971c555613f09b270a2461
20335 Author: Wolfgang Denk <wd@denx.de>
20336 Date: Thu Jul 10 13:16:09 2008 +0200
20338 Fix some more print() format errors.
20340 Signed-off-by: Wolfgang Denk <wd@denx.de>
20342 commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
20343 Author: Christian Eggers <christian@p2400.wgnetz.xx>
20344 Date: Fri Jun 27 19:46:51 2008 +0200
20346 Fix "usb part" command
20348 Only print partition for selected device if user supplied the <dev>
20349 arg with the "usb part [dev]" command.
20351 Signed-off-by: Christian Eggers <ceggers@gmx.de>
20352 Acked-by: Markus Klotzbuecher <mk@denx.de>
20354 commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
20355 Author: Harald Welte <laforge@gnumonks.org>
20356 Date: Mon Jul 7 00:58:05 2008 +0800
20358 fix USB devices with multiple configurations
20360 This patch fixes bugs in usbdcore*.c related to the use of devices
20361 with multiple configurations.
20363 The original code made mistakes about the meaning of configuration value and
20364 configuration index, and the resulting off-by-one errors resulted in:
20366 * SET_CONFIGURATION always selected the first configuration, no matter what
20367 wValue is being passed.
20368 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
20369 configuration (index 0).
20371 Signed-off-by: Harald Welte <laforge@openmoko.org>
20372 Acked-by: Markus Klotzbuecher <mk@denx.de>
20374 commit e870690bdca154943ecadd5212d2d59c1b9d391b
20375 Author: Stefan Roese <sr@denx.de>
20376 Date: Thu Jul 10 10:10:54 2008 +0200
20378 MTD/NAND: Fix printf format warning in nand code
20380 This patch fixes NAND related printf format warning. Those warnings are
20381 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
20382 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
20385 Signed-off-by: Stefan Roese <sr@denx.de>
20387 commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
20388 Author: Stefan Roese <sr@denx.de>
20389 Date: Thu Jul 10 10:00:45 2008 +0200
20391 rtc: Fix printf format warning in m41t60.c
20393 Signed-off-by: Stefan Roese <sr@denx.de>
20395 commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
20396 Author: Stefan Roese <sr@denx.de>
20397 Date: Tue Jul 8 12:01:47 2008 +0200
20399 pci: Move PCI device configuration check into a separate weak function
20401 This patch moves the check, if a device should be skipped in PCI PNP
20402 configuration into the function pci_skip_dev(). This function is defined
20403 as weak so that it can be overwritten by a platform specific one if
20404 needed. The check if the device should get printed in the PCI summary upon
20405 bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
20406 pci_print_dev() which is also defined as weak too.
20408 Signed-off-by: Stefan Roese <sr@denx.de>
20410 commit b002144e1dc21374b1ef5281fe6b5d014af96650
20411 Author: Stefan Roese <sr@denx.de>
20412 Date: Thu Jul 10 09:58:06 2008 +0200
20414 ppc4xx: Fix printf format warnings now visible with the updated format check
20416 This patch fixes ppc4xx related printf format warning. Those warnings are
20417 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
20418 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
20421 Signed-off-by: Stefan Roese <sr@denx.de>
20423 commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
20424 Author: Stefan Roese <sr@denx.de>
20425 Date: Wed Jul 9 17:33:57 2008 +0200
20427 ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
20429 Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
20430 To support such configurations, we "only" map the first 2GB via the TLB's. We
20431 need some free virtual address space for the remaining peripherals like, SoC
20432 devices, FLASH etc.
20434 Note that ECC is currently not supported on configurations with more than 2GB
20435 SDRAM. This is because we only map the first 2GB on such systems, and therefore
20436 the ECC parity byte of the remaining area can't be written.
20438 Signed-off-by: Stefan Roese <sr@denx.de>
20440 commit cf1c2ed91df26903b956948f37f82de9e1158a89
20441 Author: Larry Johnson <lrj@acm.org>
20442 Date: Sat Jun 14 17:02:49 2008 -0400
20444 ppc4xx: Remove implementation of testdram() from Korat board support
20446 Signed-off-by: Larry Johnson <lrj@acm.org>
20447 Signed-off-by: Stefan Roese <sr@denx.de>
20449 commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
20450 Author: Larry Johnson <lrj@acm.org>
20451 Date: Sat Jun 14 16:53:02 2008 -0400
20453 ppc4xx: Update and add FDT to Korat board support
20455 Signed-off-by: Larry Johnson <lrj@acm.org>
20456 Signed-off-by: Stefan Roese <sr@denx.de>
20458 commit 4188f0491886b3b486164e819c0a83fdb97efd7d
20459 Author: Wolfgang Denk <wd@denx.de>
20460 Date: Thu Jul 10 01:13:30 2008 +0200
20462 Minor coding style cleanup; update CHANGELOG
20464 Signed-off-by: Wolfgang Denk <wd@denx.de>
20466 commit 8915f1189c1d29d8be7f4de325702d90a8988219
20467 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
20468 Date: Wed Jul 9 17:50:45 2008 -0400
20470 e1000: add support for 82545GM 64bit PCI-X copper variant
20472 This PCI-X e1000 variant works by just adding in the correct
20473 PCI IDs in the appropriate places.
20475 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
20477 commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
20478 Author: Daniel Hellstrom <daniel@gaisler.com>
20479 Date: Wed Jul 9 12:34:11 2008 +0000
20481 SPARC: Build error fix
20483 (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
20485 This patch makes SPARC targets build again. It is caused by
20486 phys_addr_t and phys_size_t being defined in the wrong header
20487 file. include/lmb.h need those typedefs to build.
20489 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
20491 commit 11ccc33fa21acce108f6b4a6936e3271af904c64
20492 Author: Marcel Ziswiler <marcel@ziswiler.com>
20493 Date: Wed Jul 9 08:17:15 2008 +0200
20495 Many spelling fixes in README.
20497 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
20499 commit dbab0691d2533560f7e91b92ae844046a9ad1df3
20500 Author: Marcel Ziswiler <marcel@ziswiler.com>
20501 Date: Wed Jul 9 08:17:06 2008 +0200
20503 Minor spelling fix in comment.
20505 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
20507 commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
20508 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20509 Date: Tue Jul 8 14:54:58 2008 -0400
20511 Round the serial port clock divisor value returned by calc_divisor()
20513 Round the serial port clock divisor value returned by
20516 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20517 Signed-off-by: John Roberts <john.roberts@pwav.com>
20519 commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
20520 Author: Scott Wood <scottwood@freescale.com>
20521 Date: Wed Jul 9 17:47:52 2008 -0500
20523 NAND: ifdef-protect most of nand.h when using legacy NAND.
20525 Some macros such as NAND_CTL_SETALE conflict between current and legacy
20526 NAND, being defined by the subsystem in the former case and the board
20527 config file in the latter.
20529 Signed-off-by: Scott Wood <scottwood@freescale.com>
20531 commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
20532 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20533 Date: Tue Jul 8 11:02:05 2008 -0400
20535 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
20537 ARM: Fix for incorrect version of patch applied when
20538 adding support for the Lyrtech SFF-SDR board.
20540 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20541 Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
20543 commit 47042b363ee5022b8180c65d3f4558e7972c79cd
20544 Author: Kyungmin Park <kmpark@infradead.org>
20545 Date: Tue Jul 8 09:08:40 2008 +0900
20547 Remove useless print message at apollon
20549 Remove useless print message at apollon
20551 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
20553 commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
20554 Author: Andy Fleming <afleming@freescale.com>
20555 Date: Mon Jul 7 14:24:39 2008 -0500
20557 Fix LMB type issues
20559 The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
20560 of casting problems in the bootm code that called the LMB functions.
20562 Signed-off-by: Andy Fleming <afleming@freescale.com>
20564 commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
20565 Author: Kumar Gala <galak@kernel.crashing.org>
20566 Date: Mon Jul 7 09:39:06 2008 -0500
20568 Fix compiler warnings
20570 gcc-4.3.x generates the following:
20572 bootm.c: In function 'do_bootm_linux':
20573 bootm.c:208: warning: cast from pointer to integer of different size
20574 bootm.c:215: warning: cast from pointer to integer of different size
20576 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20578 commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
20579 Author: Harald Welte <laforge@gnumonks.org>
20580 Date: Mon Jul 7 15:40:39 2008 +0800
20582 Remove code duplication for setting the default environment
20584 common/env_common.c (default_env): new function that resets the environment to
20586 common/env_common.c (env_relocate): use default_env instead of own copy
20587 common/env_nand.c (env_relocate_spec): use default_env instead of own copy
20588 include/environment.h: added default_env prototype
20590 Signed-off-by: Werner Almesberger <werner@openmoko.org>
20591 Signed-off-by: Harald Welte <laforge@openmoko.org>
20593 commit 99c2b434d37863df5dda5207a53760c6506fc2be
20594 Author: Marcel Ziswiler <marcel@ziswiler.com>
20595 Date: Sun Jun 22 16:13:46 2008 +0200
20597 NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
20599 The writeenv() and readenv() calls introduced by the recently added bad block
20600 management for environment variables were missing casts therefore producing
20601 compile time warnings.
20602 While at it fixing some typo in a comment and indentation.
20604 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
20605 Signed-off-by: Scott Wood <scottwood@freescale.com>
20607 commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
20608 Author: Scott Wood <scottwood@freescale.com>
20609 Date: Fri Jun 20 12:38:57 2008 -0500
20611 NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
20613 This is particularly problematic now that non-NAND-specific code is
20614 including <nand.h>, and thus all debugging code is being compiled
20615 regardless of whether it was requested, as reported by Scott McNutt
20616 <smcnutt@psyent.com>.
20618 Signed-off-by: Scott Wood <scottwood@freescale.com>
20620 commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
20621 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20622 Date: Thu Jun 12 19:27:58 2008 +0200
20624 mmc: Move atmel_mci driver into drivers/mmc
20626 This makes it easier to use the driver on other platforms.
20628 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20629 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20631 commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
20632 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20633 Date: Thu Jun 12 19:27:57 2008 +0200
20635 avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
20637 After we move the atmel_mci driver into drivers/mmc, we can't select
20638 it with CONFIG_MMC anymore. Introduce a new symbol specifically for
20639 this driver so that there's no ambiguity.
20641 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20642 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20644 commit 5ce13051a48c62bda9723df3b4778c492fb47f36
20645 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20646 Date: Thu Jun 12 19:27:56 2008 +0200
20648 Create drivers/mmc subdirectory
20650 In order to consolidate more of the various MMC drivers around the
20651 tree, we must first have a common place to put them.
20653 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20654 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20656 commit b502611b51f02718c2d1117d4981dabceb5af6de
20657 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
20658 Date: Sun Jul 6 12:30:09 2008 +0200
20660 Change env_get_char from a global function ptr to a function
20662 This avoids an early global data reference.
20664 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
20666 commit 27269417ade432189b234d9fbac98b54e37b978c
20667 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
20668 Date: Sun Jul 6 13:57:58 2008 +0400
20670 Some copy-n-paste fixes in printf usage
20672 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
20674 commit 0e6989b9faf1588e8723535539e88a0df3c71356
20675 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
20676 Date: Sun Jul 6 13:57:00 2008 +0400
20678 FDT memory and pci node fixes for MPC8260ADS
20680 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
20682 commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
20683 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
20684 Date: Mon Jul 7 06:41:14 2008 -0700
20688 The compiler will help find mismatches between printf formats and
20689 arguments if you let it. This patch adds the necessary attributes to
20690 declarations in include/common.h, then begins to correct the resulting
20691 compiler warnings. Some of these were bugs, e.g., "$d" instead of
20692 "%d" and incorrect arguments. Others were just annoying, like
20693 int-long mismatches on a system where both are 32 bits. It's worth
20694 fixing the annoying errors to catch the real ones.
20696 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
20698 commit 417faf285b2527acb2de24c5cd3e2621d385408c
20699 Author: Becky Bruce <becky.bruce@freescale.com>
20700 Date: Wed Jul 9 11:09:41 2008 -0500
20702 Allow print_size to print in GB
20704 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
20706 commit e7c374529c87525c9aa463e0557c287887ae4e9e
20707 Author: Jason McMullan <mcmullan@netapp.com>
20708 Date: Sun Jun 8 23:56:00 2008 -0400
20710 mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
20712 Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
20713 they are set in the U-Boot environment.
20715 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
20716 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20718 commit 0192d7d56e9320819dea262f49789ae18fdd2c72
20719 Author: Stefan Roese <sr@denx.de>
20720 Date: Tue Jul 8 12:57:14 2008 +0200
20722 jedec_flash: Fix AM29DL800BB device ID
20724 As pointed out by Jerry Hicks, this patch corrects the device ID of
20725 the Spansion AM29DL800BB NOR device. Verified against latest Spansion
20726 datasheet (rev C4 from Dezember 2006).
20728 Signed-off-by: Stefan Roese <sr@denx.de>
20730 commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
20731 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20732 Date: Mon Jul 7 11:22:37 2008 +0900
20734 sh: Fix compile error sh7763rdp board
20736 Disable SH ether driver.
20738 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20740 commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
20741 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20742 Date: Tue Jul 8 12:03:24 2008 +0900
20744 sh: Fix SH-boards compile error
20746 By Cleanup out-or-tree building for some boards (.depend)
20747 (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
20748 because filse ware changed, some SH-boards have compile error.
20749 I revised this problem.
20751 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20753 commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
20754 Author: Jason Jin <Jason.jin@freescale.com>
20755 Date: Tue May 13 11:50:36 2008 +0800
20757 Feed the watchdog in u-boot for 8610 board.
20759 The watchdog on 8610 board is enabled by setting sw[6]
20760 to on. Once enabled, the watchdog can not be disabled
20761 by software. So feed the dog in u-boot is necessary for
20764 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20766 commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
20767 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20768 Date: Wed Jun 18 12:10:33 2008 -0400
20770 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
20772 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
20774 Remove duplicate code in a if/else block in
20775 cpu/arm926ejs/davinci/lxt972.c.
20776 Fixed style issues.
20778 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20779 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20781 commit fec61431a003f5778bafa2624073a571af8bec9f
20782 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20783 Date: Wed Jun 18 12:10:31 2008 -0400
20785 Remove duplicate definitions in include/lxt971a.h.
20787 Remove duplicate definitions in include/lxt971a.h.
20789 Remove duplicate registers and bits definitions in
20790 include/lxt971a.h for standard MII registers, and
20791 use values in include/miiphy.h instead.
20793 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20794 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20796 commit 9751ee0990f467941da0b095a4e995f863672d7a
20797 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20798 Date: Wed Jun 11 21:05:00 2008 +0900
20800 net: sh: Renesas SH7763 Ethernet device support
20802 Renesas SH7763 has 2 channel Ethernet device.
20803 This is 10/100/1000 Base support.
20804 But this patch check 10/100 Base only.
20806 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20807 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20809 commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
20810 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20811 Date: Tue Jun 17 16:28:05 2008 +0900
20813 sh: Update Renesas R2DPlus board
20815 New NOR Flash board support and remove old type flash board config.
20816 And Remove network setting from config file.
20818 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20819 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20821 commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
20822 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20823 Date: Tue Jun 17 16:28:01 2008 +0900
20825 sh: Update Renesas R7780MP board
20827 New NOR Flash board support and remove network setting from config file.
20829 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20830 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20832 commit c001cd604e9f133743effbddb1c215b48e761c5a
20833 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20834 Date: Tue Jun 17 16:27:56 2008 +0900
20836 sh: Update Renesas Migo-R board
20838 Remove network setting from config file.
20840 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20841 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20843 commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
20844 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20845 Date: Tue Jun 17 16:27:52 2008 +0900
20847 sh: Update Hitachi MS7722SE board
20849 Remove network setting from config file.
20851 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20852 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20854 commit 26209e48e8791670c93108029a5c31a30016c6df
20855 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20856 Date: Tue Jun 17 16:27:48 2008 +0900
20858 sh: Cleanup source code of SH7763RDP
20860 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20861 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20863 commit 5cd5b2c96ef0025762931349d350287aec03ab47
20864 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20865 Date: Tue Jun 17 16:27:44 2008 +0900
20867 sh: Cleanup source code of R2DPlus
20869 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20870 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20872 commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
20873 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20874 Date: Tue Jun 17 16:27:41 2008 +0900
20876 sh: Cleanup source code of R7780MP
20878 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20879 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20881 commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
20882 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20883 Date: Tue Jun 17 16:27:38 2008 +0900
20885 sh: Cleanup source code of MS7722SE
20887 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20888 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20890 commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
20891 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20892 Date: Tue Jun 17 16:27:34 2008 +0900
20894 sh: Cleanup source code of MS7720SE
20896 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20897 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20899 commit 3ab4827cbe409488ebea1a2ee5094783f2672214
20900 Author: Wolfgang Denk <wd@denx.de>
20901 Date: Mon Jul 7 00:45:03 2008 +0200
20903 SH: fix out of tree building
20905 Signed-off-by: Wolfgang Denk <wd@denx.de>
20907 commit 9047bfa1e737d787be460387dd6f45737eeceb10
20908 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20909 Date: Thu Jul 3 23:16:06 2008 +0900
20911 net: smc911x: Fix typo
20913 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20915 commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
20916 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
20917 Date: Wed Jul 2 18:54:08 2008 +0200
20919 update mvBL-M7 board config
20921 update mvBL-M7 config file to use UBOOT_VERSION and define
20924 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
20926 commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
20927 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20928 Date: Mon Jun 30 17:45:01 2008 +0900
20930 net: fix compile problem in smc911x driver.
20932 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20933 Acked-by: Ben Warren <biggerbadderben@gmail.com>
20935 commit 9fea65a6c469b1b474b27446feb58738baba2d31
20936 Author: Michal Simek <monstr@monstr.eu>
20937 Date: Tue Jun 24 09:54:09 2008 +0200
20939 ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
20941 This change helps with better handling with others
20942 Xilinx based platform.
20944 Signed-off-by: Michal Simek <monstr@monstr.eu>
20945 Acked-by: Stefan Roese <sr@denx.de>
20947 commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
20948 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20949 Date: Tue Jun 17 13:07:11 2008 +0900
20951 net: ne2000: Move dev_addr variable from grobal to local.
20953 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20954 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20956 commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
20957 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20958 Date: Tue Jun 17 13:07:15 2008 +0900
20960 net: ne2000: Fix compile error of NE2000
20962 If enable DEBUG, can not compile ne2000 driver.
20964 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20965 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20967 commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
20968 Author: Ben Warren <biggerbadderben@gmail.com>
20969 Date: Mon Jun 23 22:57:27 2008 -0700
20971 Add mechanisms for CPU and board-specific Ethernet initialization
20973 This patch is the first step in cleaning up net/eth.c, by moving Ethernet
20974 initialization to CPU or board-specific code. Initial implementation is
20975 only on the Freescale TSEC controller, but others will be added soon.
20977 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20979 commit 7754f2be5d1835d263aad21b5a629526f3e680b0
20980 Author: Wolfgang Denk <wd@denx.de>
20981 Date: Sun Jul 6 01:21:46 2008 +0200
20983 include/sha256.h: fix file permissions.
20985 Signed-off-by: Wolfgang Denk <wd@denx.de>
20987 commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
20988 Author: Patrice Vilchez <patrice.vilchez@atmel.com>
20989 Date: Tue May 27 11:15:29 2008 +0200
20991 [AT91SAM9] Fix NAND FLASH timings
20993 Fix NAND FLASH timings for at91sam9x evaluation kits.
20995 New timings are based on application note
20996 "NAND Flash Support on AT91SAM9 Microcontrollers" available at
20997 http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
20999 Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
21000 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21001 Acked-by: Stelian Pop <stelian@popies.net>
21003 commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
21004 Author: Stelian Pop <stelian@popies.net>
21005 Date: Thu May 22 00:15:40 2008 +0200
21007 Fix boot from NOR due to incorrect reset delay.
21009 AT91 RSTC registers are battery-backuped, so their values
21010 are not reset across power cycles. One of those registers,
21011 the AT91_RSTC_MR register, is being modified by U-Boot, in
21012 the ethernet initialisation routine, to generate a 500ms
21015 Unfortunately, this value is not being restored afterwards,
21016 causing subsequent resets to also last for 500ms.
21018 This long reset sequence causes problems (at least) in the
21019 boot sequence from NOR: by the time the CPU tries to load
21020 a program from the NOR flash, the latter is still in reset
21021 and not yet available.
21023 Additionaly, this patch fixes a bug in the original code which
21024 caused the reset delay to last for 2s instead of 500ms.
21026 Signed-off-by: Stelian Pop <stelian@popies.net>
21027 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21029 commit f492dd636fbbae529e17533995bc6e5813c007f6
21030 Author: Wolfgang Denk <wd@denx.de>
21031 Date: Fri Jul 4 20:11:49 2008 +0200
21035 Signed-off-by: Wolfgang Denk <wd@denx.de>
21037 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
21038 Author: Wolfgang Denk <wd@denx.de>
21039 Date: Fri Jul 4 20:07:35 2008 +0200
21041 CCM/SCM boards: fix out of tree building
21043 Signed-off-by: Wolfgang Denk <wd@denx.de>
21045 commit ab4c3a490df9a964711556d2a05b0c787db45fde
21046 Author: Wolfgang Denk <wd@denx.de>
21047 Date: Thu Jul 3 23:22:27 2008 +0200
21049 SCM board: fix build errors.
21051 Signed-off-by: Wolfgang Denk <wd@denx.de>
21053 commit a566466f17ba0e2d2b6c250e77da678fb932470d
21054 Author: Wolfgang Denk <wd@denx.de>
21055 Date: Thu Jul 3 23:06:36 2008 +0200
21057 IAD210 board: fix ``"ALIGN" redefined'' warning.
21059 Signed-off-by: Wolfgang Denk <wd@denx.de>
21061 commit ad756314797c16fa5dca23e115aab881011f164f
21062 Author: Wolfgang Denk <wd@denx.de>
21063 Date: Thu Jul 3 23:00:24 2008 +0200
21065 CCM board: fix build errors.
21067 Signed-off-by: Wolfgang Denk <wd@denx.de>
21069 commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
21070 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21071 Date: Wed Jul 2 18:54:08 2008 +0200
21073 update mvBL-M7 board config
21075 update mvBL-M7 config file to use UBOOT_VERSION.
21077 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21078 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21080 commit ced209c50e80c25f13c083099b05044048d21f4f
21081 Author: Wolfgang Denk <wd@denx.de>
21082 Date: Thu Jul 3 22:39:21 2008 +0200
21084 sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
21086 Signed-off-by: Wolfgang Denk <wd@denx.de>
21088 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
21089 Author: Wolfgang Denk <wd@denx.de>
21090 Date: Thu Jul 3 22:34:08 2008 +0200
21092 Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
21094 Signed-off-by: Wolfgang Denk <wd@denx.de>
21096 commit 730f298485984b011b6ee8f4acb511cb45a843dd
21097 Author: Wolfgang Denk <wd@denx.de>
21098 Date: Thu Jul 3 22:04:17 2008 +0200
21100 lmb: fix "implicit declaration of function 'lmb_free'" warning
21102 Signed-off-by: Wolfgang Denk <wd@denx.de>
21104 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
21105 Author: Wolfgang Denk <wd@denx.de>
21106 Date: Wed Jul 2 23:53:23 2008 +0200
21108 Cleanup: remove redundant deleting on *~ files
21110 Signed-off-by: Wolfgang Denk <wd@denx.de>
21112 commit c8a3b109f07f02342d097b30908965f7261d9f15
21113 Author: Wolfgang Denk <wd@denx.de>
21114 Date: Wed Jul 2 23:49:18 2008 +0200
21116 Cleanup out-or-tree building for some boards (.depend)
21118 Signed-off-by: Wolfgang Denk <wd@denx.de>
21120 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
21121 Author: Wolfgang Denk <wd@denx.de>
21122 Date: Wed Jul 2 23:38:50 2008 +0200
21124 Cleanup: fix out-of-tree building for some boards
21126 Signed-off-by: Wolfgang Denk <wd@denx.de>
21128 commit 461fa68d20861811487944d22291db5a13410e20
21129 Author: Wolfgang Denk <wd@denx.de>
21130 Date: Wed Jul 2 23:00:14 2008 +0200
21132 Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
21134 Signed-off-by: Wolfgang Denk <wd@denx.de>
21136 commit 5981ebd32017e062b08aa6747cf591276f2db779
21137 Author: Detlev Zundel <dzu@denx.de>
21138 Date: Fri Jun 20 22:26:24 2008 +0200
21140 fdt: Fix typo in variable name.
21142 Signed-off-by: Detlev Zundel <dzu@denx.de>
21144 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
21145 Author: Gary Jennejohn <garyj@denx.de>
21146 Date: Thu Jun 19 11:11:19 2008 +0200
21148 Add logos for RRvision board
21150 Signed-off-by: Gary Jennejohn <garyj@denx.de>
21152 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
21153 Author: Esben Haabendal <EsbenHaabendal@gmail.com>
21154 Date: Wed Jun 18 11:03:57 2008 +0200
21156 mpc8260: add fdt_fixup_ethernet support
21158 Add support for updating mac-address and local-mac-address in fdt for
21159 all MPC8260 targets.
21161 Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
21163 commit f6a69559d64498a04e1e0b087a9b920e5775f866
21164 Author: Steven A. Falco <sfalco@harris.com>
21165 Date: Thu Jun 12 13:24:42 2008 -0400
21167 cmd_nvedit.c: clean up syntax highlighting
21169 My text-editor (vim) has a bit of trouble syntax-highlighting the
21170 cmd_nvedit.c file, because it apparently does not parse C
21171 ifdef/else/endif. The following patch does not change the behavior of
21172 the code at all, but does allow the editor to properly
21173 syntax-highlight the file.
21175 Signed-off-by: Steve Falco <sfalco@harris.com>
21177 commit 75678c807a6272ecc5541eb32898c93887f08400
21178 Author: Steven A. Falco <sfalco@harris.com>
21179 Date: Thu Jun 12 13:22:12 2008 -0400
21181 Make setenv() return status
21183 Currently, the setenv function does not return an error code.
21184 This patch allows to test for errors.
21186 Signed-off-by: Steve Falco <sfalco@harris.com>
21188 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
21189 Author: Kumar Gala <galak@kernel.crashing.org>
21190 Date: Wed Jun 11 10:14:06 2008 -0500
21192 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
21194 fls64, __ilog2_u64, ffs64 are variants that work on an u64,
21195 and fls is used to implement them.
21197 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21199 commit 83002a77cbdf383015ca384eff5fa31722d8e571
21200 Author: Magnus Lilja <lilja.magnus@gmail.com>
21201 Date: Mon Jun 9 22:58:48 2008 +0200
21203 i.MX31: Cleanup comments in lowlevel_init.S.
21205 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
21207 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
21208 Author: Ben Warren <biggerbadderben@gmail.com>
21209 Date: Sun Jun 8 23:28:33 2008 -0700
21211 Move conditional compilation of MPC8XXX SPI driver to Makefile
21213 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21215 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
21216 Author: Juergen Kilb <J.Kilb@gmx.de>
21217 Date: Sun Jun 8 17:59:53 2008 +0200
21219 i.MX31: fixed CTRL-C detection
21221 The Register URXD contains status information in bits [15..8].
21222 With status bit 15 set, CTRL-C was reported as 0x8003 instead
21223 of 0x03. Therefore CTRL-C was not detected.
21224 To solve this, bits [15..8] were masked out now.
21226 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
21227 Acked-by: Felix Radensky <felix@embedded-sol.com>
21229 commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
21230 Author: Stefan Roese <sr@denx.de>
21231 Date: Tue Jul 1 17:03:19 2008 +0200
21233 ppc4xx: Fix 460EX/GT PCIe port initialization
21235 This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
21236 configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
21239 Signed-off-by: Stefan Roese <sr@denx.de>
21241 commit b571afde0295b007a45055ee49f8822c753a5651
21242 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21243 Date: Sat Jun 7 12:29:52 2008 +0200
21247 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21248 Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
21250 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
21251 Author: Marian Balakowicz <m8@semihalf.com>
21252 Date: Fri Jun 6 23:07:40 2008 +0200
21254 Delay FIT format check on sector based devices
21256 Global FIT image operations like format check cannot be performed on
21257 a first sector data, defer them to the point when whole FIT image was
21258 uploaded to a system RAM.
21260 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21261 Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
21262 NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
21264 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
21265 Author: Dave Liu <r63238@freescale.com>
21266 Date: Tue Jun 3 17:38:19 2008 +0800
21268 sata: wait for device updating signature to host
21270 The driver need wait for the device updating signature to host.
21271 If we don't wait for it, the driver can not detect the device(disk)
21272 when the system powers up.
21274 Signed-off-by: Dave Liu <daveliu@freescale.com>
21276 commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
21277 Author: Stefan Roese <sr@denx.de>
21278 Date: Sat Jun 28 14:56:17 2008 +0200
21280 ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
21282 This patch implements a fix provided by AMCC so that the lockup upon
21283 simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
21286 Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
21287 (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
21288 USB 2.0 host and SATA.
21290 This errata is not officially available yet. I'll update the comment
21291 to add the errata number later.
21293 Signed-off-by: Stefan Roese <sr@denx.de>
21295 commit 8b616edb118e37d05f6401389eaee1c636b22828
21296 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
21297 Date: Mon Jun 2 16:42:19 2008 -0400
21299 serial_pl010.c: add watchdog support
21301 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
21303 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
21304 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
21305 Date: Mon Jun 2 16:40:08 2008 -0400
21307 jffs2_1pass.c: add watchdog support
21309 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
21311 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
21312 Author: Sascha Laue <sascha.laue@liebherr.com>
21313 Date: Fri May 30 09:48:14 2008 +0200
21315 Configure DSP POST; add watchdog reset to diag command
21317 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
21319 commit f13526517859bf6b573e23ff47199e107d1009b5
21320 Author: Tor Krill <tor@excito.com>
21321 Date: Thu May 29 10:40:17 2008 +0200
21323 Add sata sil3114 support
21325 Signed-off-by: Tor Krill <tor@excito.com>
21327 commit e093a247628228100f405b6d7f6b1bfc16141938
21328 Author: Wolfgang Denk <wd@denx.de>
21329 Date: Sat Jun 28 23:34:37 2008 +0200
21331 Coding Style Cleanup
21333 Signed-off-by: Wolfgang Denk <wd@denx.de>
21335 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
21336 Author: Wolfgang Denk <wd@denx.de>
21337 Date: Sat Jun 28 23:16:01 2008 +0200
21341 Signed-off-by: Wolfgang Denk <wd@denx.de>
21343 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
21344 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
21345 Date: Wed May 21 13:58:41 2008 -0400
21347 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
21349 This patch adds support for the Lyrtech SFF-SDR board,
21350 based on the TI DaVinci architecture (ARM926EJS).
21352 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
21353 Signed-off-by: Philip Balister <philip@balister.org>
21354 Signed-off-by: Wolfgang Denk <wd@denx.de>
21356 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
21357 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21358 Date: Thu May 22 11:09:59 2008 +0200
21360 MMC: Consolidate MMC/SD command definitions
21362 This moves the MMC and SD Card command definitions from
21363 include/asm/arch/mmc.h into include/mmc.h. These definitions are
21364 given by the MMC and SD Card standards, not by any particular
21367 There's a lot more room for consolidation in the MMC drivers which
21368 I'm hoping to get done eventually, but this patch is a start.
21370 Compile-tested for all avr32 boards as well as lpc2292sodimm and
21371 lubbock. This should cover all three mmc drivers in the tree.
21373 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21375 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
21376 Author: Kyungmin Park <kmpark@infradead.org>
21377 Date: Wed May 21 14:38:08 2008 +0900
21379 Use better Ethernet timings for apollon board
21381 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21383 commit 41c5eaa7253ed82bbae1eda5667755872c615164
21384 Author: Andy Fleming <afleming@freescale.com>
21385 Date: Mon Jun 16 13:58:56 2008 -0500
21387 Resize device tree to allow space for board changes and the chosen node
21389 Current code requires that a compiled device tree have space added to the end to
21390 leave room for extra nodes added by board code (and the chosen node). This
21391 requires that device tree creators anticipate how much space U-Boot will add to
21392 the tree, which is absurd. Ideally, the code would resize and/or relocate the
21393 tree when it needed more space, but this would require a systemic change to the
21394 fdt code, which is non-trivial. Instead, we resize the tree inside
21395 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
21396 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
21398 Signed-off-by: Andy Fleming <afleming@freescale.com>
21400 commit 7570a9941fc565922078679a72d246fe208d696d
21401 Author: Andy Fleming <afleming@freescale.com>
21402 Date: Mon Jun 16 13:58:55 2008 -0500
21404 Fix an underflow bug in __lmb_alloc_base
21406 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
21407 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
21408 merely updates __lmb_alloc_base to resemble the current version in Linux.
21410 Signed-off-by: Andy Fleming <afleming@freescale.com>
21412 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
21413 Author: Andy Fleming <afleming@freescale.com>
21414 Date: Mon Jun 16 13:58:54 2008 -0500
21418 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
21419 lmb_reserve to temporarily reserve some memory.
21421 Signed-off-by: Andy Fleming <afleming@freescale.com>
21423 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
21424 Author: Andy Fleming <afleming@freescale.com>
21425 Date: Mon Jun 16 13:58:53 2008 -0500
21429 ALIGN() returns the smallest aligned value greater than the passed
21430 in address or size. Taken from Linux.
21432 Signed-off-by: Andy Fleming <afleming@freescale.com>
21434 commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
21435 Author: Stefan Roese <sr@denx.de>
21436 Date: Tue Jun 24 17:15:22 2008 +0200
21438 ppc4xx: Fix compilation problems with phys_size_t
21440 This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
21441 board specific files where it has been missing.
21443 Signed-off-by: Stefan Roese <sr@denx.de>
21445 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
21446 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21447 Date: Mon May 19 12:26:38 2008 +0200
21449 Conditionally add -fno-stack-protector to CFLAGS
21451 When compile-testing on powerpc, I get errors like this:
21453 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
21455 This seems to be because -fstack-protector is on by default, so
21456 let's explicitly disable it on all architectures that support the
21459 The Ubuntu toolchain is affected by this problem, and according to
21460 Mike Frysinger, Gentoo has been running with SSP enabled for years.
21461 More and more distros are turning SSP on by default, so this problem
21462 is likely to get worse in the future.
21464 Also, powerpc just happens to be one of the arches I do
21465 compile-testing on. There may be other arches affected by this too.
21467 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21469 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
21470 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21471 Date: Sun May 18 19:09:52 2008 +0200
21473 pcmcia/ti_pci1410a: Move compile condition to the Makefile
21475 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21477 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
21478 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21479 Date: Sun May 18 19:09:51 2008 +0200
21481 pxa_pcmcia: Move compile condition to the Makefile
21483 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21485 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
21486 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21487 Date: Sun May 18 19:09:50 2008 +0200
21489 marabun_pcmcia: Move compile condition to the Makefile
21491 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21493 commit 6a19c46cae43c16c528eddefae3db97134f1915d
21494 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21495 Date: Mon Jun 23 13:25:34 2008 +0200
21497 fix non-working mvBL-M7
21499 Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
21501 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21502 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21504 commit 846f1574ddddeda2bc227655e687308695f41cdc
21505 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21506 Date: Mon Jun 23 11:40:56 2008 +0200
21508 fix system config overwrite @ MPC834x and MPC8313
21510 During 83xx setup the "System I/O configuration register high" gets
21511 overwritten with user defined value if CFG_SICRH is defined.
21513 Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
21514 must keep their reset value regardless of configuration.
21516 On my board (using RGMII) those bits are set after reset - yet it's
21517 unclear where they come from.
21519 The patch keeps both bits on MPC834x and MPC8313.
21521 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21522 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21524 commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
21525 Author: Kim Phillips <kim.phillips@freescale.com>
21526 Date: Tue Jun 17 17:45:27 2008 -0500
21528 mpc83xx: move CPU_TYPE_ENTRY over to processor.h
21532 cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
21533 In file included from cpu.c:33:
21534 /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
21536 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21538 commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
21539 Author: Stefan Roese <sr@denx.de>
21540 Date: Mon Jun 23 11:15:09 2008 +0200
21542 ppc4xx: Fix problem in gpio_config()
21544 As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
21545 left by one. So the additional shift is bogus.
21547 Signed-off-by: Stefan Roese <sr@denx.de>
21549 commit 40777812316fc252c941665c0f60c148fd79d50f
21550 Author: Detlev Zundel <dzu@denx.de>
21551 Date: Fri Jun 20 22:24:05 2008 +0200
21553 fdt: Fix typo in variable name.
21555 Signed-off-by: Detlev Zundel <dzu@denx.de>
21557 commit 5f723a3b98c630bde33de74351f2121691fdef14
21558 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21559 Date: Fri Jun 20 10:41:05 2008 +0200
21561 avr32: Enable SPI flash support on ATNGW100
21563 The ATNGW100 has 8MB DataFlash on board. Give users access to it through
21564 the new SPI flash framework.
21566 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21568 commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
21569 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21570 Date: Fri Jun 20 12:44:28 2008 +0200
21572 avr32: Fix SPI portmux initialization
21574 Use the new GPIO manipulation functions to set up the chip select lines,
21575 and make sure both busses use GPIO for chip select control.
21577 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21579 commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
21580 Author: Peter Ma <pma@mediamatech.com>
21581 Date: Sun Jun 1 22:59:24 2008 -0700
21583 avr32: Add GPIO manipulation functions
21585 Adds GPIO manipulation functions for AVR32 AP7 platform.
21587 Signed-off-by: Peter Ma <pma@mediamatech.com>
21588 [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
21589 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21591 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
21592 Author: Wolfgang Grandegger <wg@grandegger.com>
21593 Date: Thu Jun 5 13:02:30 2008 +0200
21595 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
21597 This patch is based on the following patch sent a few minutes ago:
21598 "NAND FSL UPM: driver re-write using the hwcontrol callback"
21599 It is untested, of course. Anton, could you please give it a try.
21601 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21602 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
21604 commit 96026d42fa4e646d28318c0a1438aac4b2017909
21605 Author: Anatolij Gustschin <agust@denx.de>
21606 Date: Thu Jun 12 12:40:11 2008 +0200
21608 Fix 4xx build issue
21610 Building for 4xx doesn't work since commit 4dbdb768:
21612 In file included from 4xx_pcie.c:28:
21613 include/asm/processor.h:971: error: expected ')' before 'ver'
21614 make[1]: *** [4xx_pcie.o] Error 1
21616 This patch fixes the problem.
21618 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21619 Acked-by: Stefan Roese <sr@denx.de>
21620 Acked-by: Kumar Gala <galak@kernel.crashing.org>
21622 commit a036b0443657fe0f4773786de9092251869f08ac
21623 Author: Kumar Gala <galak@kernel.crashing.org>
21624 Date: Thu Jun 19 01:45:50 2008 -0500
21626 MPC8610HPCD: Report board id, board version and fpga version.
21628 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21630 commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
21631 Author: Kumar Gala <galak@kernel.crashing.org>
21632 Date: Thu Jun 19 01:45:27 2008 -0500
21634 MPC8641HPCN: Report board id, board version and fpga version.
21636 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21638 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
21639 Author: Stefan Roese <sr@denx.de>
21640 Date: Mon Jun 16 10:40:02 2008 +0200
21642 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
21644 This patch simplifies flash_toggle() (AMD commandset), which is used to
21645 detect if a FLASH device is still busy with erase/program operations. On
21646 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
21647 did not detect the busy state reliably, resulting in non erased sectors
21648 etc. This patch now simplifies this function by "just" comparing the
21649 complete data-word instead of ANDing it with the command-word (0x40)
21650 before the compatison. It is done the same way in the Linux implementation
21651 chip_ready() in cfi_cmdset_0002.c.
21653 Signed-off-by: Stefan Roese <sr@denx.de>
21655 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
21656 Author: Philip Balister <philip@balister.org>
21657 Date: Mon Jun 16 08:58:07 2008 -0400
21659 NAND: Add missing declaration to non-redundant saveenv().
21661 Signed-off-by: Scott Wood <scottwood@freescale.com>
21663 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
21664 Author: Wolfgang Grandegger <wg@grandegger.com>
21665 Date: Mon Jun 2 15:09:55 2008 +0200
21667 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
21669 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21670 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
21671 Signed-off-by: Scott Wood <scottwood@freescale.com>
21673 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
21674 Author: Stefan Roese <sr@denx.de>
21675 Date: Tue Jun 10 15:34:11 2008 +0200
21677 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
21679 This patch disables the square wave output of the M41T62 RTC used on
21680 Canyonlands & Glacier. Here the explanation:
21682 The serial real-time clock part used in the design is an
21683 STMicro M41T62. This part has a full-time 32KHz square wave
21684 output that is connected to the TmrClk input to the
21685 processor. The default state for this square wave output is
21686 enabled so the output runs continuously when the board is
21687 powered normally and also from the battery. The TmrClk input
21688 to the processor goes to ground when the power is removed
21689 from the board/processor, and therefore the running square
21690 wave output is driving ground which drains the battery quickly.
21692 Signed-off-by: Stefan Roese <sr@denx.de>
21694 commit a94f22f08f280905926219e568568964cb9eeb9d
21695 Author: Andy Fleming <afleming@freescale.com>
21696 Date: Wed Jun 11 18:10:20 2008 -0500
21698 Fix build issue with string.h and linux/string.h
21701 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
21702 Author: Wolfgang Denk <wd@denx.de>
21703 Date: Fri Jun 6 14:28:14 2008 +0200
21705 tools/mkimage: fix compiler warnings on some systems.
21707 Broke building on some systems, because the host's string.h was interfering
21708 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
21709 we're building for the host, so now we only include when building inside
21712 Signed-off-by: Andy Fleming <afleming@freescale.com>
21714 commit 9973e3c614721bbf169882ffc3be266a6611cd60
21715 Author: Becky Bruce <becky.bruce@freescale.com>
21716 Date: Mon Jun 9 16:03:40 2008 -0500
21718 Change initdram() return type to phys_size_t
21720 This patch changes the return type of initdram() from long int to phys_size_t.
21721 This is required for a couple of reasons: long int limits the amount of dram
21722 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
21723 size of physical memory. phys_size_t is defined as an unsigned long on almost
21724 all current platforms.
21726 This patch *only* changes the return type of the initdram function (in
21727 include/common.h, as well as in each board's implementation of initdram). It
21728 does not actually modify the code inside the function on any of the platforms;
21729 platforms which wish to support more than 2GB of DRAM will need to modify
21730 their initdram() function code.
21732 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
21735 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
21737 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
21738 Author: Becky Bruce <becky.bruce@freescale.com>
21739 Date: Mon Jun 9 20:37:18 2008 -0500
21741 Change lmb to use phys_size_t/phys_addr_t
21743 This updates the lmb code to use phys_size_t
21744 and phys_addr_t instead of unsigned long. Other code
21745 which interacts with this code, like getenv_bootm_size()
21748 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
21750 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
21752 commit 61b09fc2952dc636017df4e7970e3de132276ba1
21753 Author: Becky Bruce <becky.bruce@freescale.com>
21754 Date: Mon Jun 9 20:37:17 2008 -0500
21756 Change print_size to take phys_size_t
21758 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
21760 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
21761 Author: Becky Bruce <becky.bruce@freescale.com>
21762 Date: Mon Jun 9 20:37:16 2008 -0500
21764 Change bd/gd memsize/ram_size to be phys_size_t.
21766 Currently, both are defined as an unsigned long, but
21767 should be phys_size_t. This should result in no real change,
21768 since phys_size_t is currently an unsigned long for all the
21769 default configs. Also add print_lnum to cmd_bdinfo to deal
21770 with the potentially wider memsize.
21772 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
21774 commit ba04f7010958e88a8910f2a123fee53fdc72e013
21775 Author: Kumar Gala <galak@kernel.crashing.org>
21776 Date: Tue Jun 10 16:16:02 2008 -0500
21778 FSL LAW: Add new interface to use the last free LAW
21780 LAWs have the concept of priority so its useful to be able to allocate
21781 the lowest (highest number) priority. We will end up using this with the
21784 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21786 commit 859a86a25c569d3665ff413d1d923394b8a961f3
21787 Author: Kumar Gala <galak@kernel.crashing.org>
21788 Date: Wed Jun 11 00:51:45 2008 -0500
21790 85xx/86xx: Move to dynamic mgmt of LAWs
21792 With the new LAW interface (set_next_law) we can move to letting the
21793 system allocate which LAWs are used for what purpose. This makes life
21794 a bit easier going forward with the new DDR code.
21796 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21797 Signed-off-by: Andy Fleming <afleming@freescale.com>
21798 Acked-by: Jon Loeliger <jdl@freescale.com>
21799 Acked-by: Becky Bruce <becky.bruce@freescale.com>
21801 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
21802 Author: Kumar Gala <galak@kernel.crashing.org>
21803 Date: Wed Jun 11 00:44:10 2008 -0500
21805 FSL LAW: Keep track of LAW allocations
21807 Make it so we keep track of which LAWs have allocated and provide
21808 a function (set_next_law) which can allocate a LAW for us if one is
21811 In the future we will move to doing more "dynamic" LAW allocation
21812 since the majority of users dont really care about what LAW number
21815 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
21817 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21818 Signed-off-by: Andy Fleming <afleming@freescale.com>
21820 commit ddde74a159caa6e18b481fec01d40b885aebb566
21821 Author: Kumar Gala <galak@kernel.crashing.org>
21822 Date: Mon Jun 9 22:31:57 2008 -0500
21824 85xx: remove dummy board_early_init_f
21826 A number of board ports have empty version of board_early_init_f
21827 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
21829 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21831 commit 81e56e9af0d43712db8efb843606a8d62eab454f
21832 Author: Kumar Gala <galak@kernel.crashing.org>
21833 Date: Mon Jun 9 18:55:38 2008 -0500
21835 MPC8544DS: Update config.h
21837 * Enable flash progress
21838 * remove CLEAR_LAW0 since we dont really use it
21840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21842 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
21843 Author: Kumar Gala <galak@kernel.crashing.org>
21844 Date: Mon Jun 9 13:37:24 2008 -0500
21846 85xx: Remove unused and unconfigured memory test code.
21848 Remove unused and unconfigured DDR test code from FSL 85xx boards.
21849 Besides, other common code exists.
21851 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21853 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
21854 Author: Sergei Poselenov <sposelenov@emcraft.com>
21855 Date: Fri Jun 6 15:42:45 2008 +0200
21857 Socrates: Added FPGA base address update in FDT.
21859 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21861 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
21862 Author: Sergei Poselenov <sposelenov@emcraft.com>
21863 Date: Fri Jun 6 15:42:44 2008 +0200
21865 Socrates: NAND support added. Changed the U-Boot base address and
21867 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21869 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
21870 Author: Sergei Poselenov <sposelenov@emcraft.com>
21871 Date: Fri Jun 6 15:42:43 2008 +0200
21873 NAND: Added support for 128-bit OOB, adapted
21875 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21877 commit 31ca0208612f2eb57690110d7c2815953650e47b
21878 Author: Sergei Poselenov <sposelenov@emcraft.com>
21879 Date: Fri Jun 6 15:42:42 2008 +0200
21881 Socrates: added missed file with UPMA configuration data.
21883 Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
21885 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
21886 Author: Sergei Poselenov <sposelenov@emcraft.com>
21887 Date: Fri Jun 6 15:42:41 2008 +0200
21889 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
21891 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21893 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
21894 Author: Sergei Poselenov <sposelenov@emcraft.com>
21895 Date: Fri Jun 6 15:42:40 2008 +0200
21897 Added the upmconfig() function for 85xx.
21899 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21900 Signed-off-by: Andy Fleming <afleming@freescale.com>
21902 commit d39e68514ff943930ee692cff3fde03532eb7fec
21903 Author: Sergei Poselenov <sposelenov@emcraft.com>
21904 Date: Fri Jun 6 15:42:39 2008 +0200
21906 Socrates: config file cleanup.
21908 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21910 commit e8cc3f04b124f757af4528206e60d8eb715ae083
21911 Author: Wolfgang Grandegger <wg@grandegger.com>
21912 Date: Thu Jun 5 13:12:10 2008 +0200
21914 TQM85xx: Change memory map to support Flash memory > 128 MiB
21916 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
21917 memory. The current memory map only supports up to 128 MiB Flash.
21918 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
21919 set, up to 1 GiB flash is supported. To achieve this, the memory
21920 map has to be adjusted in great parts (for example the CCSRBAR is
21921 moved from 0xE0000000 to 0xA0000000).
21923 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
21924 memory map also has to be considered in the kernel (changed
21925 CCSRBAR address, changed PCI IO base address, ...). Please use
21926 an appropriate Flat Device Tree blob (tqm8548.dtb).
21928 Signed-off-by: Martin Krause <martin.krause@tqs.de>
21929 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21931 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
21932 Author: Wolfgang Grandegger <wg@grandegger.com>
21933 Date: Thu Jun 5 13:12:09 2008 +0200
21935 TQM85xx: NAND support via local bus UPMB
21937 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
21938 default and can be enabled for the TQM8548 modules. It is now based on
21939 the re-written FSL NAND UPM driver. A patch has been posted earlier today
21942 "NAND FSL UPM: driver re-write using the hwcontrol callback"
21944 Note that the R/B pin is not supported by that module requiring to use
21945 the specified maximum delay time.
21947 Note: With NAND support enabled the size of the U-Boot image exceeds
21948 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
21949 doubling the image size :-(.
21951 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
21952 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21954 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
21955 Author: Wolfgang Grandegger <wg@grandegger.com>
21956 Date: Thu Jun 5 13:12:08 2008 +0200
21958 TQM8548: PCI express support
21960 This patch adds support for PCI express cards. The board support
21961 now uses common FSL PCI init code, for both, PCI and PCIe on all
21964 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
21965 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21967 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
21968 Author: Wolfgang Grandegger <wg@grandegger.com>
21969 Date: Thu Jun 5 13:12:07 2008 +0200
21971 TQM8548: Basic support for the TQM8548 modules
21973 This patch adds basic support for the TQM8548 module from TQ-Components
21974 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
21977 Furthermore Flash buffer write has been enabled to speed up output to
21978 the Flash by approx. a factor of 10.
21980 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
21981 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21983 commit 25991353204c78b094c3c1fec90182dcd607ab8f
21984 Author: Wolfgang Grandegger <wg@grandegger.com>
21985 Date: Thu Jun 5 13:12:06 2008 +0200
21987 TQM85xx: Support for Flat Device Tree
21989 This patch adds support for Linux kernels using the Flat Device Tree.
21990 It also re-defines the default environment settings for booting Linux
21993 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
21995 commit d9ee843d54c54776e1fdb86336ce554906a87331
21996 Author: Wolfgang Grandegger <wg@grandegger.com>
21997 Date: Thu Jun 5 13:12:05 2008 +0200
21999 TQM85xx: Support for Intel 82527 compatible CAN controller
22001 This patch adds initialization of the UPMC RAM to support up to two
22002 Intel 82527 compatible CAN controller on the TQM85xx modules.
22004 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
22005 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22007 commit 518d5cfe72916323c746af1647764459914f555f
22008 Author: Wolfgang Grandegger <wg@grandegger.com>
22009 Date: Thu Jun 5 13:12:04 2008 +0200
22011 TQM85xx: Bugfix in the SDRAM initialisation
22013 The CS0_BNDS register is now set according to the detected
22016 Signed-off-by Martin Krause <martin.krause@tqs.de>
22018 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
22019 Author: Wolfgang Grandegger <wg@grandegger.com>
22020 Date: Thu Jun 5 13:12:03 2008 +0200
22022 TQM85xx: Fix chip select configuration for second FLASH bank
22024 This patch fixes the re-calculation of the automatic chip select
22025 configuration for boards with two populated FLASH banks.
22027 Signed-off-by: Martin Krause <martin.krause@tqs.de>
22029 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
22030 Author: Wolfgang Grandegger <wg@grandegger.com>
22031 Date: Thu Jun 5 13:12:02 2008 +0200
22033 TQM85xx: Support for Spansion 'N' type flashes added
22035 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
22036 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
22037 needs to be changed -> new start address of the environment. The macro
22038 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
22039 defined for boards with 'N' type flashes.
22041 Signed-off-by: Martin Krause <martin.krause@tqs.de>
22042 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22044 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
22045 Author: Wolfgang Grandegger <wg@grandegger.com>
22046 Date: Thu Jun 5 13:12:01 2008 +0200
22048 TQM85xx: Fix CPM port pin configuration
22050 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
22051 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
22052 as serial interface anyway. Worse, on some board variants configuring the
22053 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
22055 Signed-off-by: Martin Krause <martin.krause@tqs.de>
22057 commit b99ba1679e8cd51b023e67098c89e606e47137d2
22058 Author: Wolfgang Grandegger <wg@grandegger.com>
22059 Date: Thu Jun 5 13:12:00 2008 +0200
22061 TQM85xx: Various coding style fixes
22063 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22065 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
22066 Author: Gerald Van Baren <vanbaren@cideas.com>
22067 Date: Tue Jun 10 22:15:58 2008 -0400
22069 libfdt: Move the working_fdt pointer to cmd_fdt.c
22071 The working_fdt pointer was declared in common/fdt_support.c but was
22072 not used there. Move it to common/cmd_fdt.c where it is used (it is
22073 also used in lib_ppc/bootm.c).
22075 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22077 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
22078 Author: Kim Phillips <kim.phillips@freescale.com>
22079 Date: Tue Jun 10 11:06:17 2008 -0500
22081 fdt: unshadow global working fdt variable
22083 differentiate with local variables of the same name by renaming the
22084 global 'fdt' variable 'working_fdt'.
22086 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22088 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
22089 Author: Andy Fleming <afleming@freescale.com>
22090 Date: Tue Jun 10 18:49:34 2008 -0500
22092 socrates: Fix PCI clk fix patch
22094 The submitted patch seems to have been more up-to-date, but an older patch was
22095 already in the repository. This patch encompasses the differences
22097 Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
22099 Signed-off-by: Andy Fleming <afleming@freescale.com>
22101 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
22102 Author: Wolfgang Grandegger <wg@grandegger.com>
22103 Date: Thu Jun 5 13:02:29 2008 +0200
22105 NAND FSL UPM: driver re-write using the hwcontrol callback
22107 This is a re-write of the NAND FSL UPM driver using the more universal
22108 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
22109 list of furher modifications:
22111 - For the time being, the UPM setup writing the UPM array has been
22112 removed from the driver and must now be done by the board specific
22115 - The bus width definition in "struct fsl_upm_nand" is now in bits to
22116 comply with the corresponding Linux driver and 8, 16 and 32 bit
22117 accesses are supported.
22119 - chip->dev_read is only set if fun->dev_ready != NULL, which is
22120 required for boards not connecting the R/B pin.
22122 - A few issue have been fixed with MxMR bit manipulation like in the
22123 corresponding Linux driver.
22125 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
22126 as well, because the address is already determined by
22127 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
22129 This patch has been tested on a TQM8548 modules with the NAND chip
22130 Micron MT29F8G08FABWP.
22132 This patch is based on the following patches posted to this list a few
22135 PPC: add accessor macros to clear and set bits in one shot
22136 83xx/85xx/86xx: add more MxMR local bus definitions
22138 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22139 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22141 commit 6beecfbb542992eede5831240cd58678274683a9
22142 Author: Wolfgang Grandegger <wg@grandegger.com>
22143 Date: Thu Jun 5 13:11:59 2008 +0200
22145 MPC85xx: Beautify boot output of L2 cache configuration
22147 The boot output is now aligned poperly with other boot output
22153 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22155 commit 398415114f0a705163a14543e9fef03f734b1ffa
22156 Author: Wolfgang Grandegger <wg@grandegger.com>
22157 Date: Wed Jun 4 12:45:22 2008 +0200
22159 PPC: add accessor macros to clear and set bits in one shot
22161 PPC: add accessor macros to clear and set bits in one shot
22163 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
22164 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
22165 They are very handy to manipulate bits it I/O registers.
22167 This patch is required for my forthcoming FSL NAND UPM driver re-write and
22168 the support for the TQM8548 module.
22170 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22172 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
22173 Author: Wolfgang Grandegger <wg@grandegger.com>
22174 Date: Wed Jun 4 13:52:17 2008 +0200
22176 TQM: move TQM boards to board/tqc
22178 Move all TQM board directories to the vendor specific directory "tqc"
22179 for modules from TQ-Components GmbH (http://www.tqc.de).
22181 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22183 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
22184 Author: Wolfgang Grandegger <wg@grandegger.com>
22185 Date: Mon Jun 2 12:09:30 2008 +0200
22187 83xx/85xx/86xx: add more MxMR local bus definitions
22189 83xx/85xx/86xx: add more MxMR local bus definitions
22191 This patch adds more macro definitions for the UPM Machine Mode Registers
22192 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
22193 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
22194 required for my forthcoming FSL NAND UPM driver re-write and the support
22195 for the TQM8548 module.
22197 This patch is based on the following two patches from Anton Vorontsov:
22199 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
22200 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
22202 I leave coding style violation fixes, code beautification and name
22203 corrections to somebody else ;-(.
22205 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
22207 commit c8c5fc266e4499e283c293ccb972863156aa4134
22208 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22209 Date: Thu May 29 18:14:56 2008 +0400
22211 83xx/85xx: further localbus cleanups
22213 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
22214 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
22216 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22218 commit 42dbd667c88d496882d53e22656e89b654205492
22219 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22220 Date: Wed May 28 18:20:15 2008 +0400
22222 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
22224 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
22225 use it on MPC85xx and MPC86xx processors.
22227 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22229 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
22230 Author: Kumar Gala <galak@kernel.crashing.org>
22231 Date: Thu May 29 11:22:06 2008 -0500
22233 85xx: Add setting of cache props in the device tree.
22235 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22237 commit 4dbdb7681e243431530df0725627192a0c4aefda
22238 Author: Kumar Gala <galak@kernel.crashing.org>
22239 Date: Tue Jun 10 16:53:46 2008 -0500
22241 85xx: expose cpu identification
22243 The current cpu identification code is used just to return the name
22244 of the processor at boot. There are some other locations that the name
22245 is useful (device tree setup). Expose the functionality to other bits
22248 Also, drop the 'E' suffix and add it on by looking at the SVR version
22249 when we print this out. This is mainly to allow the most flexible use
22250 of the name. The device tree code tends to not care about the 'E' suffix.
22252 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22254 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
22255 Author: Kim Phillips <kim.phillips@freescale.com>
22256 Date: Tue Jun 10 13:25:24 2008 -0500
22258 mpc83xx: MVBLM7: minor build fixups
22260 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22262 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
22263 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
22264 Date: Tue Jun 10 09:14:05 2008 +0200
22266 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
22268 Add MPC8343 based board mvBlueLYNX-M7.
22269 It's a single board stereo camera system.
22270 Please read doc/README.mvblm7 for details.
22272 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
22273 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22275 commit c005b93925ba49f07da2aa748527996d927e172f
22276 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
22277 Date: Tue Jun 10 09:13:16 2008 +0200
22279 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
22281 Add MPC8343 based board mvBlueLYNX-M7.
22282 It's a single board stereo camera system.
22283 Please read doc/README.mvblm7 for details.
22285 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
22286 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22288 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
22289 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22290 Date: Thu May 29 18:14:56 2008 +0400
22292 83xx/85xx: further localbus cleanups
22294 move the BRx_* and ORx_* left behind in mpc85xx.h
22296 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
22297 the same, just few differences which needs some attention though).
22299 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
22300 of these defines. So this cleanup I'll leave for the "better times".
22302 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22305 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
22306 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22307 Date: Wed May 28 18:20:15 2008 +0400
22309 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
22311 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
22312 use it on MPC85xx and MPC86xx processors.
22314 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22315 Acked-by: Andy Fleming <afleming@freescale.com>
22316 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22318 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
22319 Author: Tor Krill <tor@excito.com>
22320 Date: Mon Jun 2 15:09:30 2008 +0200
22322 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
22324 Signed-off-by: Tor Krill <tor@excito.com>
22325 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22327 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
22328 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22329 Date: Mon Jun 9 23:37:44 2008 +0900
22331 net: Conditional COBJS inclusion of network drivers
22333 Replace COBJS-y with appropriate driver config names.
22335 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22336 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22338 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
22339 Author: Gerald Van Baren <vanbaren@cideas.com>
22340 Date: Mon Jun 9 21:02:17 2008 -0400
22342 Use strncmp() for the fdt command
22344 Cleaner than doing multiple conditionals on characters.
22346 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22348 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
22349 Author: Gerald Van Baren <vanbaren@cideas.com>
22350 Date: Sat Jun 7 12:25:05 2008 -0400
22352 The fdt boardsetup command criteria was not unique
22354 It was checking just for "b", which is not unique with respect to the
22355 "boot" command. Change to check for "boa"[rdsetup].
22357 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22359 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
22360 Author: David Gibson <david@gibson.dropbear.id.au>
22361 Date: Tue May 20 17:19:11 2008 +1000
22363 libfdt: Several cleanups to parameter checking
22365 This patch makes a couple of small cleanups to parameter checking of
22368 - In several functions which take a node offset, we use an
22369 idiom involving fdt_next_tag() first to check that we have indeed been
22370 given a node offset. This patch adds a helper function
22371 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
22373 - In fdt_rw.c in several places we have the expanded version
22374 of the RW_CHECK_HEADER() macro for no particular reason. This patch
22375 replaces those instances with an invocation of the macro; that's what
22378 - In fdt_sw.c we rename the check_header_sw() function to
22379 sw_check_header() to match the analgous function in fdt_rw.c, and we
22380 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
22381 functions in fdt_rw.c
22383 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
22385 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
22386 Author: Gerald Van Baren <vanbaren@cideas.com>
22387 Date: Tue Jun 3 20:34:45 2008 -0400
22389 Remove the deprecated CONFIG_OF_FLAT_TREE
22391 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
22392 cleaner, has better functionality, and is better supported.
22394 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22396 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
22397 Author: Gerald Van Baren <vanbaren@cideas.com>
22398 Date: Tue Jun 3 20:26:29 2008 -0400
22400 Change the stxxst to CONFIG_OF_LIBFDT
22402 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
22403 to CONFIG_OF_LIBFDT.
22405 WARNING: It appears that this board lost its ability to boot via a
22406 flattened device tree prior to this changeset.
22408 WARNING: This conversion was untested because I do not have a board to
22411 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22413 commit 589c04271d129729a8b01391453851ab9cc4069c
22414 Author: Gerald Van Baren <vanbaren@cideas.com>
22415 Date: Tue Jun 3 20:24:58 2008 -0400
22417 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
22419 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
22420 to CONFIG_OF_LIBFDT.
22422 WARNING: This conversion is untested because I do not have a board to
22425 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
22426 /aliases/ethernet1 property for the ethernet to work.
22428 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22430 commit ee1e35bede91debc8bff9b02f75574486033b652
22431 Author: Kumar Gala <galak@kernel.crashing.org>
22432 Date: Thu May 29 01:21:24 2008 -0500
22434 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
22436 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22438 commit 3b9519fc50802436e417c839e69df7b2016cade5
22439 Author: Becky Bruce <becky.bruce@freescale.com>
22440 Date: Wed May 14 13:10:04 2008 -0500
22442 MPC85xx: Change traps.c to not reference non-addressable memory
22444 Currently, END_OF_RAM is used by the trap code to determine if
22445 we should attempt to access the stack pointer or not. However,
22446 on systems with a lot of RAM, only a subset of the RAM is
22447 guaranteed to be mapped in and accessible. Change END_OF_RAM
22448 to use get_effective_memsize() instead of using the raw ram
22449 size out of the bd.
22451 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22453 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
22454 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22455 Date: Mon Jun 9 13:39:57 2008 +0900
22457 sh: Renesas Solutions SH7763RDP board support
22459 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
22460 In this patch, support SCIF, NOR Flash, and Ethernet.
22462 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22463 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22465 commit 60179098a95eaa972007d7ec58e4c1588029720f
22466 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22467 Date: Fri Jun 6 16:24:13 2008 +0900
22469 sh: Add support Renesas SH7763
22471 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
22472 This patch supprts CPU register's header file.
22474 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22475 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22477 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
22478 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22479 Date: Fri Jun 6 16:16:08 2008 +0900
22481 sh: SH7763 SCIF support
22483 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
22484 but only SCIF2 is different. This patch work all SCIF channel.
22486 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22487 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22489 commit 79b51ff8205f0354d5300570614c1d2db499679c
22490 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22491 Date: Sat Jun 7 20:51:59 2008 +0900
22493 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
22495 Also get rid of some #ifdefs in *.c files.
22497 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22499 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
22500 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22501 Date: Sat Jun 7 20:51:56 2008 +0900
22503 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
22507 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
22508 need to have this config as a system type specifier.
22510 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
22511 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
22513 Machine type specifiers. Each port should have one of aboves.
22515 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22517 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
22518 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
22519 Date: Fri May 30 16:05:28 2008 -0400
22521 env_nand.c: Added bad block management for environment variables
22523 Modified to check for bad blocks and to skipping over them when
22524 CFG_ENV_RANGE has been defined.
22525 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
22528 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
22529 Signed-off-by: Scott Wood <scottwood@freescale.com>
22531 commit 279726bd00558e80263d44581c44167625b7fb9a
22532 Author: Becky Bruce <becky.bruce@freescale.com>
22533 Date: Wed May 14 13:09:58 2008 -0500
22535 MPC86xx: Change traps.c to not reference non-addressable memory
22537 Currently, END_OF_RAM is used by the trap code to determine if
22538 we should attempt to access the stack pointer or not. However,
22539 on systems with a lot of RAM, only a subset of the RAM is
22540 guaranteed to be mapped in and accessible. Change END_OF_RAM
22541 to use get_effective_memsize() instead of using the raw ram
22542 size out of the bd to prevent us from trying to access
22545 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22547 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
22548 Author: Wolfgang Denk <wd@denx.de>
22549 Date: Fri Jun 6 14:28:14 2008 +0200
22551 tools/mkimage: fix compiler warnings on some systems.
22553 Signed-off-by: Wolfgang Denk <wd@denx.de>
22555 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
22556 Author: Stefan Roese <sr@denx.de>
22557 Date: Fri Jun 6 16:10:41 2008 +0200
22559 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
22561 We use upper case letters for the AMCC processor defines (like
22562 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
22563 not CONFIG_440SPe. This patch fixes the last misspelled config options.
22565 Signed-off-by: Stefan Roese <sr@denx.de>
22567 commit 72675dc6c06a48846d180106161d49dd714383cc
22568 Author: Stefan Roese <sr@denx.de>
22569 Date: Fri Jun 6 15:55:21 2008 +0200
22571 ppc4xx: Unify AMCC's board config files (part 3/3)
22573 This patch series unifies the AMCC eval board ports by introducing
22574 a common include header for all AMCC eval boards:
22576 include/configs/amcc-common.h
22578 This header now includes all common configuration options/defines which
22579 are removed from the board specific headers.
22581 The reason for this is ease of maintenance and unified look and feel
22582 of all AMCC boards.
22584 Signed-off-by: Stefan Roese <sr@denx.de>
22586 commit 490f204096d6e2c9940f67816f154a8125bab116
22587 Author: Stefan Roese <sr@denx.de>
22588 Date: Fri Jun 6 15:55:03 2008 +0200
22590 ppc4xx: Unify AMCC's board config files (part 2/3)
22592 This patch series unifies the AMCC eval board ports by introducing
22593 a common include header for all AMCC eval boards:
22595 include/configs/amcc-common.h
22597 This header now includes all common configuration options/defines which
22598 are removed from the board specific headers.
22600 The reason for this is ease of maintenance and unified look and feel
22601 of all AMCC boards.
22603 Signed-off-by: Stefan Roese <sr@denx.de>
22605 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
22606 Author: Stefan Roese <sr@denx.de>
22607 Date: Fri Jun 6 15:54:31 2008 +0200
22609 ppc4xx: Unify AMCC's board config files (part 1/3)
22611 This patch series unifies the AMCC eval board ports by introducing
22612 a common include header for all AMCC eval boards:
22614 include/configs/amcc-common.h
22616 This header now includes all common configuration options/defines which
22617 are removed from the board specific headers.
22619 The reason for this is ease of maintenance and unified look and feel
22620 of all AMCC boards.
22622 Signed-off-by: Stefan Roese <sr@denx.de>
22624 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
22625 Author: Remy Bohmer <linux@bohmer.net>
22626 Date: Thu Jun 5 13:03:36 2008 +0200
22628 DM9000 fix status check fail 0x6d error for trizeps board
22630 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
22631 the status byte need to be checked to identify a valid packet in the fifo
22633 But, The several different Application Notes do not all speak the same
22634 language on these bits. They do not disagree, but only 1 Application Note
22635 noted explicitly that only these 2 bits need to be checked.
22636 Even the datasheets do not mention anything about these 2 bits.
22638 Because the old code, and the kernel check the whole byte, I left this piece
22641 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
22644 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
22645 in the fifo) is much shorter now, compared to the older U-boot driver code,
22646 so that we can maybe run into a hardware condition now that was never seen
22647 before, or maybe was seen very unfrequently.
22649 Additionaly added a cleanup of a stack variable.
22651 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22652 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22654 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
22655 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22656 Date: Thu Jun 5 22:29:00 2008 +0900
22658 [MIPS] Update <asm/addrspace.h> header
22660 - Fix traditional KSEG names
22661 - Replace PHYSADDR with CPHYSADDR
22663 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22665 commit f0d5a6f060d00358b85c62a921a423ea8df71184
22666 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22667 Date: Thu Jun 5 22:29:00 2008 +0900
22669 [MIPS] mips_config.mk: Misc fixes
22671 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
22674 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22676 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
22677 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22678 Date: Thu Jun 5 22:29:00 2008 +0900
22680 [MIPS] Kill unused <version.h> inclusions
22682 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22684 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
22685 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22686 Date: Thu Jun 5 22:29:00 2008 +0900
22688 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
22690 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
22691 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
22692 in the U-Boot system.
22694 The other is we don't have a proper time management counter like timestamp
22695 other ARCHs have. We need the 32-bit millisecond clock counter.
22697 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
22698 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
22699 of calculated CP0 counter cycles in a CFG_HZ.
22703 * Fix improper CFG_HZ value to have 1000
22705 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
22707 * timer_init: initialize timestamp and set up the first timer expiration.
22708 Note that we don't need to initialize CP0 count/compare registers here
22709 as they have been already zeroed out on the system reset. Leave them as
22712 * get_timer: calculate how many timestamps have been passed, then return
22713 base-relative timestamp. Make sure we can easily count missed timestamps
22714 regardless of CP0 count/compare value.
22716 * get_ticks: return the current timestamp, that is get_timer(0).
22718 Most parts are from good old Linux v2.6.16 kernel.
22721 - Remove FIXME comments as they turned out to be trivial.
22722 - Use CP0 compare register as a global variable for expirelo.
22723 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
22726 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22728 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
22729 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22730 Date: Thu Jun 5 22:29:00 2008 +0900
22732 [MIPS] lib_mips/time.c: Fix udelay
22734 What we have to do is just to wait for given micro-seconds. No need to
22735 take into account current time, get_timer and CFG_HZ.
22737 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22739 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
22740 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22741 Date: Thu Jun 5 22:28:59 2008 +0900
22743 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
22745 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
22746 This patch replaces mips_{compare,count}_set and mips_count_get with
22749 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
22751 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
22752 Author: Remy Bohmer <linux@bohmer.net>
22753 Date: Tue Jun 3 15:48:17 2008 +0200
22755 Get rid of annoying/superfluous bad-checksum warning message
22757 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
22758 It is annoying for ordinary users who start to doubt the network connection
22759 in general when they see messages like this.
22761 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
22762 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
22763 now before checking the checksum.
22765 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22766 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22768 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
22769 Author: Remy Bohmer <linux@bohmer.net>
22770 Date: Wed Jun 4 10:47:25 2008 +0200
22772 Fix order for reading rx-status registers in 32bit mode of DM9000
22774 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
22775 a bug in reading the rx-status registers in 32bit mode only.
22776 This patch repairs this.
22778 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22779 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22781 commit 98291e2e689096420465074cce926b226d2e71b4
22782 Author: Remy Bohmer <linux@bohmer.net>
22783 Date: Tue Jun 3 15:26:26 2008 +0200
22785 DM9000: Some minor code cleanups
22787 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
22788 need some other minor cleanup.
22790 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22791 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22793 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
22794 Author: Remy Bohmer <linux@bohmer.net>
22795 Date: Tue Jun 3 15:26:25 2008 +0200
22797 DM9000: Make driver work properly for DM9000A
22799 The DM9000A network controller does not work with the U-boot DM9000x driver.
22800 Analysis showed that many incoming packets are lost.
22802 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
22803 check for a valid rx packet be done on the interrupt status register, not
22804 directly by performing the dummy read and the rx status check as is currently
22805 the case in the u-boot driver.
22807 When the recommended poll is done as suggested the driver starts working
22808 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
22809 can be more than 1 package in the fifo at the same time.
22811 The driver must perform the rx-status check in a loop and read and handle all
22812 packages until there is no more left _after_ the interrupt RX flag is set.
22814 This change has been tested with DM9000A, DM9000E, DM9000EP.
22816 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22817 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22819 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
22820 Author: Remy Bohmer <linux@bohmer.net>
22821 Date: Tue Jun 3 15:26:24 2008 +0200
22823 DM9000: Improve eth_reset() routine
22825 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
22826 reset procedure must be done twice to properly reset the DM9000 by means of software.
22827 This errata is not needed anymore for the DM9000A, but it does not bother it.
22829 This change has been tested with DM9000A, DM9000E, DM9000EP.
22831 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22832 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22834 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
22835 Author: Remy Bohmer <linux@bohmer.net>
22836 Date: Tue Jun 3 15:26:23 2008 +0200
22838 DM9000: improve eth_send() routine
22840 The eth_send routine of the U-boot DM9000x driver does not match the
22841 DM9000 or DM9000A application notes/programming guides.
22843 This change improves the stability of the DM9000A network controller.
22845 This change has been tested with DM9000A, DM9000E, DM9000EP.
22847 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22848 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22850 commit 134e266253c02a7832560da59d394989c4f64453
22851 Author: Remy Bohmer <linux@bohmer.net>
22852 Date: Tue Jun 3 15:26:22 2008 +0200
22854 DM9000: repair debug logging
22856 It seems that the debugging code of the DM9000x driver in U-boot has not been
22857 compiled for a long time, because it cannot compile...
22859 Also rearranged some loglines to get more useful info while debugging.
22861 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22862 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22864 commit a101361bfe23c120321e45d114c0603b8e0763e9
22865 Author: Remy Bohmer <linux@bohmer.net>
22866 Date: Tue Jun 3 15:26:21 2008 +0200
22868 DM9000: Add data bus-width auto detection.
22870 The U-boot DM9000x driver contains a compile time bus-width definition for
22871 the databus connected to the network controller.
22873 This compile check makes the code unclear, inflexible and is unneccessary.
22874 It can be asked to the network controller what its bus-width is by reading bits
22875 6 and 7 of the interrupt status register.
22877 The linux kernel already uses a runtime mechanism to determine this bus-width,
22878 so the implementation below looks somewhat like that implementation.
22880 This change has been tested with DM9000A, DM9000E, DM9000EP.
22882 Signed-off-by: Remy Bohmer <linux@bohmer.net>
22883 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22885 commit 63a0afa0c32e5f4ea98a9439542870072437404d
22886 Author: Stefan Roese <sr@denx.de>
22887 Date: Wed Jun 4 19:19:20 2008 +0200
22889 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
22891 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
22892 introduced by the commit:
22894 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
22896 With this patch SDRAM will get initialized again and booting from NAND
22899 Signed-off-by: Stefan Roese <sr@denx.de>
22900 Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
22902 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
22903 Author: Wolfgang Denk <wd@denx.de>
22904 Date: Tue May 27 14:19:30 2008 +0200
22906 Socrates: Fix PCI bus frequency report
22908 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
22910 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
22911 Author: Tor Krill <tor@excito.com>
22912 Date: Thu May 29 11:10:30 2008 +0200
22914 Fix incorrect switch for IF_TYPE in part.c
22916 Use correct field in block_dev_desc_t when writing interface type in
22917 dev_print. Error introduced in 574b3195.
22919 Also added fix from Martin Krause
22921 Signed-off-by: Tor Krill <tor@excito.com>
22923 commit b64b8a0bd310935b70af69ac970952f2b364ae56
22924 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
22925 Date: Tue May 27 10:25:39 2008 +0200
22927 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
22929 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
22931 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
22932 Author: Peter Tyser <ptyser@xes-inc.com>
22933 Date: Thu May 22 18:56:52 2008 -0500
22935 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
22937 Removed unneeded command line history initialization. Also, the original
22938 code would access the 'initted' variable before relocation to SDRAM
22939 which resulted in erratic behavior since the bss is not initialized when
22940 executing from flash.
22942 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
22944 commit 22f371b63038a4ecab04068877c1089e51a01ba1
22945 Author: Grant Erickson <gerickson@nuovations.com>
22946 Date: Wed May 21 13:28:30 2008 -0700
22948 PPC4xx: Simplified post_word_{load, store}
22950 This patch simplifies post_word_{load,store} by using the preprocessor
22951 to eliminate redundant, copy-and-pasted code.
22953 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
22955 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
22956 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
22957 Date: Wed May 7 21:25:33 2008 +0400
22959 cfi_flash: enable M18 flash chips family support.
22961 Added new command set ID. Buffered write command processing is changed
22962 in order to support M18 flash chips family.
22964 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
22965 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
22967 commit 93c56f212ccdadc182018f0769cb284426b88f1d
22968 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
22969 Date: Wed May 7 21:24:44 2008 +0400
22971 cfi_flash: support of long cmd in U-boot.
22973 Some NOR flash chips needs support of commands with length grether than max
22974 value size of uchar. For example all M18 family chips use 0x1ff command in
22975 buffered write mode as value of program loops count.
22977 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
22978 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
22980 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
22981 Author: Stefan Roese <sr@denx.de>
22982 Date: Fri May 16 11:06:06 2008 +0200
22984 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
22986 On AD7414 the first value upon bootup is not read correctly.
22987 This is most likely because of the 800ms update time of the
22988 temp register in normal update mode. To get current values
22989 each time we issue the "dtt" command including upon powerup
22990 we switch into one-short mode.
22992 This patch fixes the problem on AD7414 equipped boards (Sequoia,
22993 Canyonlands etc), that temp value printed in the bootup log was
22996 Signed-off-by: Stefan Roese <sr@denx.de>
22998 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
22999 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23000 Date: Fri May 30 16:55:06 2008 +0200
23002 ppc4xx: Cleanup CPCI405 variant's config file
23004 This patch removes some dead code from CPCI405 board's
23005 config files. JFFS2 support is also removed. It's not used and
23006 CPCI4052 does not build anymore without some size reduction.
23008 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23010 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
23011 Author: Kenneth Johansson <kenneth@southpole.se>
23012 Date: Thu May 29 16:32:33 2008 +0200
23014 Remove shell variable UNDEF_SYM.
23016 UNDEF_SYM is a shell variable in the main Makefile used to force the
23017 linker to add all u-boot commands to the final image. It has no use here.
23019 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
23021 commit 8c66497e06bf803489c589df58ee591d71033274
23022 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23023 Date: Fri May 16 11:10:35 2008 +0200
23025 Add support for environment in SPI flash
23027 This is pretty incomplete...it doesn't handle reading the environment
23028 before relocation, it doesn't support redundant environment, and it
23029 doesn't support embedded environment. But apart from that, it does
23032 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23034 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
23035 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23036 Date: Fri May 16 11:10:34 2008 +0200
23038 SPI Flash: Add "sf" command
23040 This adds a new command, "sf" which can be used to manipulate SPI
23041 flash. Currently, initialization, reading, writing and erasing is
23044 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23046 commit d25ce7d24cc0f93881559f4009175ea305af65e8
23047 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23048 Date: Fri May 16 11:10:33 2008 +0200
23050 SPI Flash subsystem
23052 This adds a new SPI flash subsystem.
23054 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
23055 but some preliminary support for other flash types is in place as
23058 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23060 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
23061 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
23062 Date: Fri May 16 11:10:32 2008 +0200
23064 atmel_spi: Driver for the Atmel SPI controller
23066 This adds a driver for the SPI controller found on most AT91 and AVR32
23067 chips, implementing the new SPI API.
23070 - Update to new API
23071 - Handle zero-length transfers appropriately. The user may send a
23072 zero-length SPI transfer with SPI_XFER_END set in order to
23073 deactivate the chip select after a series of transfers with chip
23074 select active. This is useful e.g. when polling the status
23075 register of DataFlash.
23077 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23079 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
23080 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
23081 Date: Fri May 16 11:10:31 2008 +0200
23083 SPI API improvements
23085 This patch gets rid of the spi_chipsel table and adds a handful of new
23086 functions that makes the SPI layer cleaner and more flexible.
23088 Instead of the spi_chipsel table, each board that wants to use SPI
23089 gets to implement three hooks:
23090 * spi_cs_activate(): Activates the chipselect for a given slave
23091 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
23092 * spi_cs_is_valid(): Determines if the given bus/chipselect
23093 combination can be activated.
23095 Not all drivers may need those extra functions however. If that's the
23096 case, the board code may just leave them out (assuming they know what
23097 the driver needs) or rely on the linker to strip them out (assuming
23098 --gc-sections is being used.)
23100 To set up communication parameters for a given slave, the driver needs
23101 to call spi_setup_slave(). This returns a pointer to an opaque
23102 spi_slave struct which must be passed as a parameter to subsequent SPI
23103 calls. This struct can be freed by calling spi_free_slave(), but most
23104 driver probably don't want to do this.
23106 Before starting one or more SPI transfers, the driver must call
23107 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
23108 the hardware. When all transfers are done, the driver must call
23109 spi_release_bus() to make the bus available to others, and possibly
23110 shut down the SPI controller hardware.
23112 spi_xfer() behaves mostly the same as before, but it now takes a
23113 spi_slave parameter instead of a spi_chipsel function pointer. It also
23114 got a new parameter, flags, which is used to specify chip select
23115 behaviour. This may be extended with other flags in the future.
23117 This patch has been build-tested on all powerpc and arm boards
23118 involved. I have not tested NIOS since I don't have a toolchain for it
23119 installed, so I expect some breakage there even though I've tried
23120 fixing up everything I could find by visual inspection.
23122 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
23123 DataFlash drivers posted as a follow-up. I'd like some help testing
23124 other boards that use the existing SPI API.
23126 But most of all, I'd like some comments on the new API. Is this stuff
23127 usable for everyone? If not, why?
23130 - Build fixes for various boards, drivers and commands
23131 - Provide common struct spi_slave definition that can be extended by
23133 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
23134 - Make default bus and mode build-time configurable
23135 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
23138 - Add opaque struct spi_slave for controller-specific data associated
23140 - Add spi_claim_bus() and spi_release_bus()
23141 - Add spi_free_slave()
23142 - spi_setup() is now called spi_setup_slave() and returns a
23144 - soft_spi now supports four SPI modes (CPOL|CPHA)
23145 - Add bus parameter to spi_setup_slave()
23146 - Convert the new i.MX32 SPI driver
23147 - Convert the new MC13783 RTC driver
23150 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
23153 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23154 Tested-by: Guennadi Liakhovetski <lg@denx.de>
23156 commit 289011207d999b2e4085150d2aa30d547ad9b800
23157 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23158 Date: Fri May 16 11:10:30 2008 +0200
23160 Move definition of container_of() to common.h
23162 AVR32 and AT91SAM9 both have their own identical definitions of
23163 container_of() taken from the Linux kernel. Move it to common.h so
23164 that all architectures can use it.
23166 container_of() is already used by some drivers, and will be used
23167 extensively by the new and improved SPI API.
23169 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23171 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
23172 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23173 Date: Fri May 16 11:08:11 2008 +0200
23175 soft_i2c: Pull SDA high before reading
23177 Spotted by Dean Capindale.
23179 Systems that support open-drain GPIO properly are allowed provide an
23180 empty I2C_TRISTATE define. However, this means that we need to be
23181 careful not to drive SDA low when the slave is expected to respond.
23183 This patch adds a missing I2C_SDA(1) to read_byte() required to
23184 tristate the SDA line on systems that support open-drain GPIO.
23186 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23188 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
23189 Author: Stefan Roese <sr@denx.de>
23190 Date: Mon May 19 11:34:53 2008 +0200
23192 ppc4xx: Remove implementations of testdram()
23194 This patch removes the used testdram() implementations of the board
23195 that are maintained by myself.
23197 Signed-off-by: Stefan Roese <sr@denx.de>
23199 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
23200 Author: Stefan Roese <sr@denx.de>
23201 Date: Mon Jun 2 17:37:28 2008 +0200
23203 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
23205 Historically the 405 U-Boot port had a dram_init() call in early init
23206 stage. This function was still called from start.S and most of the time
23207 coded in assembler. This is not needed anymore (since a long time) and
23208 boards should implement the common initdram() function in C instead.
23210 This patch now removed the dram_init() call from start.S and removes the
23211 empty implementations that are scattered through most of the 405 board
23212 ports. Some older board ports really implement this dram_init() though.
23222 I changed those boards to call this assembler dram_init() function now
23223 from their board specific initdram() instead. This *should* work, but please
23224 test again on those platforms. And it is perhaps a good idea that those
23225 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
23226 some time. So further patches welcome here.
23228 Signed-off-by: Stefan Roese <sr@denx.de>
23230 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
23231 Author: Stefan Roese <sr@denx.de>
23232 Date: Mon Jun 2 17:22:11 2008 +0200
23234 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
23236 Signed-off-by: Stefan Roese <sr@denx.de>
23238 commit 39b32be18cd33b53a84065edcd4e465165cc5564
23239 Author: Stefan Roese <sr@denx.de>
23240 Date: Mon Jun 2 17:20:03 2008 +0200
23242 ppc4xx: Fix common ECC generation code for 440GP style platforms
23244 This patch makes the common 4xx ECC code really usable on 440GP style
23247 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
23248 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
23249 we need to make some processor dependant defines used later on by the
23252 Signed-off-by: Stefan Roese <sr@denx.de>
23254 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
23255 Author: Stefan Roese <sr@denx.de>
23256 Date: Mon Jun 2 17:13:55 2008 +0200
23258 ppc4xx: Change Kilauea to use the common DDR2 init function
23260 This patch changes the kilauea and kilauea_nand (for NAND booting)
23261 board port to not use a board specific DDR2 init routine anymore. Now
23262 the common code from cpu/ppc4xx is used.
23264 Thanks to Grant Erickson for all his basic work on this 405EX early
23267 Signed-off-by: Stefan Roese <sr@denx.de>
23269 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
23270 Author: Stefan Roese <sr@denx.de>
23271 Date: Mon Jun 2 14:59:21 2008 +0200
23273 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
23275 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
23276 ppc4xx related SDRAM/DDR/DDR2 controller defines.
23278 Signed-off-by: Stefan Roese <sr@denx.de>
23280 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
23281 Author: Stefan Roese <sr@denx.de>
23282 Date: Mon Jun 2 14:57:41 2008 +0200
23284 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
23286 This patch removes all SDRAM related defines from the PPC4xx headers
23287 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
23288 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
23290 It also introduces new defines for the equipped SDRAM controller based on
23291 which PPC variant is used. There new defines are:
23293 used on 405GR/CR/EP and some Xilinx Virtex boards.
23295 used on 440GP/GX/EP/GR.
23297 used on 440EPx/GRx.
23299 used on 405EX/r/440SP/SPe/460EX/GT.
23301 Signed-off-by: Stefan Roese <sr@denx.de>
23303 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
23304 Author: Stefan Roese <sr@denx.de>
23305 Date: Mon Jun 2 14:35:44 2008 +0200
23307 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
23309 This patch consolidates the 405 and 440 parts of the NAND booting code
23310 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
23311 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
23312 Only *after* running from this location, nand_boot() is called.
23314 Please note that the initsdram() call is now moved from nand_boot.c
23315 to start.S. I experienced problems with some boards like Kilauea
23316 (405EX), which don't have internal SRAM (OCM) and relocation needs to
23317 be done to SDRAM before the NAND controller can get accessed. When
23318 initdram() is called later on in nand_boot(), this can lead to problems
23319 with variables in the bss sections like nand_ecc_pos[].
23321 Signed-off-by: Stefan Roese <sr@denx.de>
23322 Acked-by: Scott Wood <scottwood@freescale.com>
23324 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
23325 Author: Grant Erickson <gerickson@nuovations.com>
23326 Date: Thu May 22 14:44:24 2008 -0700
23328 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
23330 This patch (Part 2 of 2):
23332 * Rolls up a suite of changes to enable correct primordial stack and
23333 global data handling when the data cache is used for such a purpose
23334 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
23336 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
23337 eliminating redundant ECC initialization implementations and moving
23338 redundant SDRAM initialization out of board code into shared 4xx
23341 * Enables MCSR visibility on the 405EX(r).
23343 * Enables the use of the data cache for initial RAM on
23344 both AMCC's Kilauea and Makalu and removes a redundant
23345 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
23347 - Removed, per Stefan Roese's request, defunct memory.c file for
23348 Makalu and rolled sdram_init from it into makalu.c.
23350 With respect to the 4xx DDR initialization and ECC unification, there
23351 is certainly more work that can and should be done (file renaming,
23352 etc.). However, that can be handled at a later date on a second or
23353 third pass. As it stands, this patch moves things forward in an
23354 incremental yet positive way for those platforms that utilize this
23355 code and the features associated with it.
23357 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
23358 Signed-off-by: Stefan Roese <sr@denx.de>
23360 commit c821b5f120bedf73867513466412587c6912a8f8
23361 Author: Grant Erickson <gerickson@nuovations.com>
23362 Date: Thu May 22 14:44:14 2008 -0700
23364 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
23366 This patch (Part 1 of 2):
23368 * Rolls up a suite of changes to enable correct primordial stack and
23369 global data handling when the data cache is used for such a purpose
23370 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
23372 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
23373 eliminating redundant ECC initialization implementations and moving
23374 redundant SDRAM initialization out of board code into shared 4xx
23377 * Enables MCSR visibility on the 405EX(r).
23379 * Enables the use of the data cache for initial RAM on
23380 both AMCC's Kilauea and Makalu and removes a redundant
23381 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
23383 - Removed, per Stefan Roese's request, defunct memory.c file for
23384 Makalu and rolled sdram_init from it into makalu.c.
23386 With respect to the 4xx DDR initialization and ECC unification, there
23387 is certainly more work that can and should be done (file renaming,
23388 etc.). However, that can be handled at a later date on a second or
23389 third pass. As it stands, this patch moves things forward in an
23390 incremental yet positive way for those platforms that utilize this
23391 code and the features associated with it.
23393 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
23394 Signed-off-by: Stefan Roese <sr@denx.de>
23396 commit a439680019e06171d4a5694b7992accce87f590e
23397 Author: Grant Erickson <gerickson@nuovations.com>
23398 Date: Wed May 21 13:28:30 2008 -0700
23400 PPC4xx: Simplified post_word_{load, store}
23402 This patch simplifies post_word_{load,store} by using the preprocessor
23403 to eliminate redundant, copy-and-pasted code.
23405 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
23407 commit f979690ee337450b2030aba128f95b7a8d9881c0
23408 Author: Kumar Gala <galak@kernel.crashing.org>
23409 Date: Thu May 15 15:13:08 2008 -0500
23411 Fix warnings from gcc-4.3.0 build on a ppc host
23413 * The cfi_flash.c memset fix actual allows the board to boot so there is
23414 a bit more going on here than just resolving warnings associated with
23415 uninitialized variables.
23417 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
23418 inline function 'ext2_find_next_zero_bit' which is not static
23420 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23422 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
23423 Author: Becky Bruce <becky.bruce@freescale.com>
23424 Date: Wed May 14 13:09:51 2008 -0500
23426 MPC512x: Change traps.c to not reference non-addressable memory
23428 Currently, END_OF_RAM is used by the trap code to determine if
23429 we should attempt to access the stack pointer or not. However,
23430 on systems with a lot of RAM, only a subset of the RAM is
23431 guaranteed to be mapped in and accessible. Change END_OF_RAM
23432 to use get_effective_memsize() instead of using the raw ram
23433 size out of the bd.
23435 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
23437 commit 81673e9ae14b771cd13faf19947192599cae3959
23438 Author: Kumar Gala <galak@kernel.crashing.org>
23439 Date: Tue May 13 19:01:54 2008 -0500
23441 Make sure common.h is the first include.
23443 If common.h isn't first we can get CONFIG_ options defined in the
23444 board config file ignored. This can cause an issue if any of those
23445 config options impact the size of types of data structures
23446 (eg CONFIG_PHYS_64BIT).
23448 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23450 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
23451 Author: Marian Balakowicz <m8@semihalf.com>
23452 Date: Tue May 13 15:53:29 2008 +0200
23454 Avoid initrd and logbuffer area overlaps
23456 Add logbuffer to reserved LMB areas to prevent initrd allocation
23457 from overlaping with it.
23459 Make sure to use correct logbuffer base address.
23461 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
23463 commit 6956d53d9934862507f83f0e3255dfd4662e7482
23464 Author: Sascha Laue <sascha.laue@liebherr.com>
23465 Date: Tue May 13 13:29:54 2008 +0200
23467 lwmon5: add memory-pattern-test to FPGA POST.
23469 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
23470 Author: Becky Bruce <becky.bruce@freescale.com>
23471 Date: Thu May 8 19:02:51 2008 -0500
23473 PPC: 86xx Add bat registers to reginfo command
23475 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
23477 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
23478 Author: Becky Bruce <becky.bruce@freescale.com>
23479 Date: Fri May 9 15:41:35 2008 -0500
23481 PPC: Add print_bats() to lib_ppc/bat_rw.c
23483 This function prints the values of all the BAT register
23484 pairs - I needed this for debug earlier this week; adding it to
23485 lib_ppc so others can use it (and add it to reginfo commands
23488 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
23490 commit c148f24c15743a02e855636e6bed013bd121f7f2
23491 Author: Becky Bruce <becky.bruce@freescale.com>
23492 Date: Thu May 15 21:29:04 2008 -0500
23494 PPC: Change lib_ppc/bat_rw.c to use high bats
23496 Currently, this code only deals with BATs 0-3, which makes
23497 it useless on systems that support BATs 4-7. Add the
23498 support for these registers.
23500 Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
23502 commit 31d826722434931e1152a09d140187dcf72f8aac
23503 Author: Becky Bruce <becky.bruce@freescale.com>
23504 Date: Thu May 8 19:02:12 2008 -0500
23506 PPC: Create and use CONFIG_HIGH_BATS
23508 Change all code that conditionally operates on high bat
23509 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
23510 instead of the myriad ways this is done now. Define the option
23511 for every config for which high bats are supported (and
23512 enabled by early boot, on parts where they're not always
23515 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
23517 commit aa3b8bf9c30065bb2ea852799d32db5020598495
23518 Author: Wolfgang Grandegger <wg@grandegger.com>
23519 Date: Wed May 28 19:55:19 2008 +0200
23521 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
23523 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
23524 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23526 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
23527 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23528 Date: Wed May 28 13:06:25 2008 -0500
23530 ColdFire: Add 10 base ethernet support for mcf5445x
23532 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23533 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23535 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
23536 Author: Jason McMullan <mcmullan@netapp.com>
23537 Date: Fri May 30 00:53:38 2008 +0900
23539 mips: Add an 'include/asm/errno.h', like all other architectures
23541 All other u-boot architectures have an include/asm/errno.h, so
23542 this change adds it to the mips include/asm-mips headers also.
23544 Stolen from Linux 2.6.25.
23546 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
23548 commit e2ad8426624bac457acc6925b6ff408e9bf20466
23549 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23550 Date: Fri May 30 00:53:38 2008 +0900
23552 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
23554 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23556 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
23557 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23558 Date: Fri May 30 00:53:38 2008 +0900
23560 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
23562 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23564 commit bf462ae450a7f2eeeddc699ed345b391e3263540
23565 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23566 Date: Fri May 30 00:53:37 2008 +0900
23568 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
23570 No functional changes.
23572 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23574 commit 89a1550ec6b74452274a7a23127936e2c7eec711
23575 Author: Jason McMullan <mcmullan@netapp.com>
23576 Date: Fri May 30 00:53:37 2008 +0900
23578 mips: If CONFIG_CMD_SPI is defined, call spi_init()
23580 The mips architecture currently does not call 'spi_init()' in the generic
23581 board initialization routine is CONFIG_CMD_SPI is defined.
23583 This patch rectifies that problem.
23585 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
23586 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23588 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
23589 Author: Jason McMullan <mcmullan@netapp.com>
23590 Date: Fri May 30 00:53:37 2008 +0900
23592 [MIPS] lib_mips/board.c: Add nand_init
23594 This patch adds the standard 'nand_init()' call to the mips generic
23595 'board_init_r()' call, bringing MIPS in line with the other architectures.
23597 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
23598 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23600 commit d6ac2ed893c2168738aee01579d6283af8d37045
23601 Author: Scott Wood <scottwood@freescale.com>
23602 Date: Thu May 22 10:49:46 2008 -0500
23604 Remove prototypes of nand_init() in favor of including nand.h.
23606 Likewise with onenand_init().
23608 Signed-off-by: Scott Wood <scottwood@freescale.com>
23610 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
23611 Author: Scott Wood <scottwood@freescale.com>
23612 Date: Thu May 22 10:49:00 2008 -0500
23614 Make onenand_uboot.h self-sufficient.
23616 Don't assume types are provided by previously included headers.
23618 Signed-off-by: Scott Wood <scottwood@freescale.com>
23620 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
23621 Author: Dirk Behme <dirk.behme@gmail.com>
23622 Date: Wed Jan 16 14:26:59 2008 +0100
23624 nand: Correct NAND erase percentage output
23626 For NAND erase sizes smaller than one NAND erase block, erase
23627 percentage output becomes grater than 100% e.g.
23631 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
23632 > nand erase 0x100000 0x2000
23633 NAND erase: device 0 offset 0x100000, size 0x2000
23634 Erasing at 0x100000 -- 200% complete.
23639 Correct this and give user a warning that more is erased than specified:
23642 > nand erase 0x100000 0x2000
23643 NAND erase: device 0 offset 0x100000, size 0x2000
23644 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
23645 Erasing 0x00004000 instead
23646 Erasing at 0x100000 -- 100% complete.
23651 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
23653 commit 5922db6c0948506be91e0de44e7a6863a18a417f
23654 Author: Stelian Pop <stelian@popies.net>
23655 Date: Tue May 13 17:31:24 2008 +0200
23657 Cleanup nand_info[] declaration.
23659 The nand_info array is declared as extern in several .c files.
23660 Those days, nand.h contains a reference to the array, so there is
23661 no need to declare it elsewhere.
23663 Signed-off-by: Stelian Pop <stelian@popies.net>
23664 Signed-off-by: Scott Wood <scottwood@freescale.com>
23666 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
23667 Author: Scott Wood <scottwood@freescale.com>
23668 Date: Mon May 19 09:30:43 2008 -0500
23670 NAND: Provide a sane default for NAND_MAX_CHIPS.
23672 This allows the header to be included regardless of whether a board's
23673 config file provides NAND-related defininitions.
23675 Signed-off-by: Scott Wood <scottwood@freescale.com>
23677 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
23678 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23679 Date: Mon May 26 12:19:10 2008 +0200
23681 avr32: Fix theoretical race in udelay()
23683 If the specified delay is very short, the cycle counter may go past the
23684 "end" time we are waiting for before we get around to reading it.
23686 Fix it by checking the different between the cycle count "now" and the
23687 cycle count at the beginning. This will work as long as the delay
23688 measured in number of cycles is below 2^31.
23690 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23692 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
23693 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23694 Date: Wed May 21 13:01:09 2008 +0200
23696 avr32: Compile atmel_mci.o conditionally
23698 Remove #ifdef CONFIG_MMC from the source file and use conditional
23699 compilation in the Makefile instead.
23701 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23703 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
23704 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23705 Date: Thu May 22 12:28:25 2008 +0200
23707 avr32: Fix wrong error flags in atmel_mci driver
23709 Make sure we check for CRC errors when sending commands that use CRC
23712 Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
23713 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23715 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
23716 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23717 Date: Wed May 21 11:10:59 2008 +0200
23719 avr32: Fix two warnings in atmel_mci.c
23721 The warnings are harmless but annoying. Let's fix them.
23723 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23725 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
23726 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23727 Date: Mon May 19 11:36:28 2008 +0200
23729 avr32: Rework SDRAM initialization code
23731 This cleans up the SDRAM initialization and related code a bit, and
23732 allows faster booting.
23734 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
23735 * Remove memory test from sdram_init() and make caller responsible
23736 for verifying the SDRAM and determining its size.
23737 * Remove base_address member from struct sdram_config (was sdram_info)
23738 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
23739 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
23741 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23743 commit 95107b7c028806919630bf02c653aa8f4f867c94
23744 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23745 Date: Mon May 19 11:27:37 2008 +0200
23747 avr32: Do stricter stack checking in the exception handler
23749 Don't do a stack dump if the stack pointer is outside the memory area
23750 reserved for stack.
23752 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23754 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
23755 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23756 Date: Fri May 2 15:32:57 2008 +0200
23758 avr32: Use the same entry point for reset and exception handling
23760 Since the reset vector is always aligned to a very large boundary, we
23761 can save a couple of KB worth of alignment padding by placing the
23762 exception vectors at the same address.
23764 Deciding which one it is is easy: If we're handling an exception, the
23765 CPU is in Exception mode. If we're starting up after reset, the CPU is
23766 in Supervisor mode. So this adds a very minimal overhead to the reset
23767 path (only executed once) and the exception handling path (normally
23768 never executed at all.)
23770 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23772 commit 0c16eed2189a190bd5655b33c029f809a9b31128
23773 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23774 Date: Fri May 2 15:24:22 2008 +0200
23776 avr32: Put memset in its own section
23778 All C code is compiled with -ffunction-sections -fdata-sections.
23779 Assembly functions should get their own sections as well so that
23780 everything looks consistent.
23782 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23784 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
23785 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23786 Date: Fri May 2 15:21:40 2008 +0200
23788 avr32: Rename pm_init() as clk_init() and make SoC-specific
23790 pm_init() was always more about clock initialization than anything
23791 else. Dealing with PLLs, clock gating and such is also inherently
23792 SoC-specific, so move it into a SoC-specific directory.
23794 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23796 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
23797 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23798 Date: Wed Apr 30 16:15:57 2008 +0200
23800 avr32: Use new-style Makefile for the at32ap platform
23802 This makes it easier to avoid compiling certain files later.
23804 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23806 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
23807 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23808 Date: Wed Apr 30 14:36:47 2008 +0200
23810 avr32: Remove unused file cpu/at32ap/pm.c
23812 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23814 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
23815 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23816 Date: Wed Apr 30 14:19:28 2008 +0200
23818 avr32: Clean up the HMATRIX code
23820 Rework the HMATRIX configuration interface so that it becomes easier
23821 to configure the HMATRIX for boards with special needs, and add new
23824 The HMATRIX header file has been split into a general,
23825 chip-independent part with register definitions, etc. and a
23826 chip-specific part with SFR bitfield definitions and master/slave
23829 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23831 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
23832 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23833 Date: Thu Nov 22 12:14:11 2007 +0100
23835 avr32: Add support for the ATSTK1006 board
23837 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
23838 board. It's currently in production and will be available soon.
23840 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23842 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
23843 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23844 Date: Tue Apr 29 12:53:05 2008 +0200
23846 avr32: Get rid of the .flashprog section
23848 The .flashprog section was only needed back when we were running
23849 directly from flash, and it's even more useless on NGW100 since it
23850 uses the CFI flash driver which never used this workaround in the
23853 Remove it on STK1000 as well, and get rid of all the associated code and
23856 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23858 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
23859 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23860 Date: Wed Apr 30 13:09:56 2008 +0200
23862 avr32: Use correct condition around macb clock accessors
23864 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
23865 the chip has a MACB controller, not when it has a USART.
23867 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23869 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
23870 Author: David Brownell <david-b@pacbell.net>
23871 Date: Wed Apr 16 22:57:58 2008 -0700
23873 avr32: Disable the AP7000 internal watchdog on startup
23875 This patch forces the watchdog off in all cases. That will at least
23876 get rid of the constant reboot cycle, though it won't let the watchdog
23877 actually run in the new kernels: its probe() comes up with a polite
23880 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23882 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
23883 Author: David Brownell <david-b@pacbell.net>
23884 Date: Fri Feb 22 12:54:39 2008 -0800
23886 avr32: stk1002 and ngw100 convergence
23888 Make STK1002 and NGW100 boards act more alike:
23889 - STK boards can use as many arguments as NGW
23890 - STK boards don't need to manage FPGAs either
23891 - NGW commands should match STK ones
23893 Also spell U-Boot right in prompts for STK1002 and NGW100.
23895 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
23896 [haavard.skinnemoen@atmel.com: update STK100[34] as well]
23897 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23899 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
23900 Author: Sergei Poselenov <sposelenov@emcraft.com>
23901 Date: Tue May 27 13:47:00 2008 +0200
23903 Socrates: Fix PCI bus frequency report
23905 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
23907 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
23908 Author: Sergei Poselenov <sposelenov@emcraft.com>
23909 Date: Tue May 27 11:49:13 2008 +0200
23911 Socrates: Added USB support.
23913 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
23915 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
23916 Author: Sergei Poselenov <sposelenov@emcraft.com>
23917 Date: Tue May 27 11:35:02 2008 +0200
23919 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
23921 In case of several PCI USB controllers on a board this variable
23922 specifys which controller to use.
23923 See doc/README.generic_usb_ohci for details.
23925 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
23927 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
23928 Author: Sergei Poselenov <sposelenov@emcraft.com>
23929 Date: Tue May 27 10:36:07 2008 +0200
23931 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
23933 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
23935 commit 83e9d7a2614d4006b92690afa3390c291734267e
23936 Author: Sergei Poselenov <sposelenov@emcraft.com>
23937 Date: Mon May 26 18:16:04 2008 +0200
23939 Socrates: Config file cleanup.
23941 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
23943 commit 602cac1389b755b223272f2328a47e6f8c240848
23944 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23945 Date: Sat May 24 12:47:46 2008 +0200
23947 MAKEALL: add at91 list
23949 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23951 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
23952 Author: Ron Madrid <ron_madrid@sbcglobal.net>
23953 Date: Fri May 23 15:37:05 2008 -0700
23955 Add Marvell 88E1118 support for TSEC
23957 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
23958 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23960 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
23961 Author: Jens Gehrlein <sew_s@tqs.de>
23962 Date: Mon May 5 14:06:11 2008 +0200
23964 smc911x: add 16 bit support
23966 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
23967 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23969 commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
23970 Author: Christian Eggers <ceggers@gmx.de>
23971 Date: Wed May 21 21:29:10 2008 +0200
23973 Fix endianess conversion in usb_ohci.c
23975 Sorry, I forgot this line:
23977 Signed-off-by: Christian Eggers <ceggers@gmx.de>
23979 I think this must be swapped (result may be equal).
23981 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
23982 Author: Christian Eggers <ceggers@gmx.de>
23983 Date: Wed May 21 22:12:00 2008 +0200
23985 USB: replace old swap_ with proper endianess conversion macros
23987 Signed-off-by: Christian Eggers <ceggers@gmx.de>
23988 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23990 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
23991 Author: Christian Eggers <ceggers@gmx.de>
23992 Date: Wed May 21 21:29:10 2008 +0200
23994 Fix endianess conversion in usb_ohci.c
23996 Signed-off-by: Christian Eggers <ceggers@gmx.de>
23997 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23999 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
24000 Author: Sergei Poselenov <sposelenov@emcraft.com>
24001 Date: Thu May 22 01:15:53 2008 +0200
24003 USB: add support for multiple PCI OHCI controllers
24005 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
24006 In case of several PCI USB controllers on a board this variable
24007 specifys which controller to use.
24009 Also add USB support for sokrates board.
24011 See doc/README.generic_usb_ohci for details.
24013 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
24014 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
24016 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
24017 Author: Wolfgang Denk <wd@denx.de>
24018 Date: Wed May 21 16:56:08 2008 +0200
24020 Fix some whitespace issues
24022 introduced by 53677ef18 "Big white-space cleanup."
24024 Signed-off-by: Wolfgang Denk <wd@denx.de>
24026 commit 4416603aeb06861b468b06a981e52c3ff805db7b
24027 Author: York Sun <yorksun@freescale.com>
24028 Date: Mon May 12 14:36:39 2008 -0500
24030 Make ads5121 out-of-tree compiling safe
24032 Reuse the existing DIU driver in board/freescale/common.
24034 Signed-off-by: York Sun <yorksun@freescale.com>
24036 commit 0e1bad47cd345c76c91a64caf41011e431b62599
24037 Author: York Sun <yorksun@freescale.com>
24038 Date: Mon May 5 10:20:01 2008 -0500
24040 Adding DIU support for Freescale 5121ADS
24042 Add DIU and cfb console support to FSL 5121ADS board.
24044 Use #define CONFIG_VIDEO in config file to enable fb console.
24046 Signed-off-by: York Sun <yorksun@freescale.com>
24048 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
24049 Author: York Sun <yorksun@freescale.com>
24050 Date: Mon May 5 10:20:00 2008 -0500
24052 Replace DPRINTF with debug
24054 Remove DPRINTF macro and replace it with generic debug macro.
24056 Signed-off-by: York Sun <yorksun@freescale.com>
24058 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
24059 Author: York Sun <yorksun@freescale.com>
24060 Date: Mon May 5 10:19:59 2008 -0500
24062 Move pixel clock setting to board file
24064 The clock divider has different format in 5121 and 8610. This patch moves it to
24065 board specific code.
24067 Signed-off-by: York Sun <yorksun@freescale.com>
24069 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
24070 Author: Wolfgang Denk <wd@denx.de>
24071 Date: Tue May 20 16:00:29 2008 +0200
24073 Big white-space cleanup.
24075 This commit gets rid of a huge amount of silly white-space issues.
24076 Especially, all sequences of SPACEs followed by TAB characters get
24077 removed (unless they appear in print statements).
24079 Also remove all embedded "vim:" and "vi:" statements which hide
24080 indentation problems.
24082 Signed-off-by: Wolfgang Denk <wd@denx.de>
24084 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
24085 Author: Sergei Poselenov <sposelenov@emcraft.com>
24086 Date: Thu May 8 17:46:23 2008 +0200
24088 socrates: fix second TSEC configuration (it is actually TSEC3)
24090 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
24092 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
24093 Author: Sergei Poselenov <sposelenov@emcraft.com>
24094 Date: Thu May 8 14:17:08 2008 +0200
24096 Fixed reset for socrates
24098 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
24100 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
24101 Author: Sergei Poselenov <sposelenov@emcraft.com>
24102 Date: Wed May 7 15:10:49 2008 +0200
24104 socrates: changes to support FDT
24106 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
24107 Signed-off-by: Wolfgang Denk <wd@denx.de>
24109 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
24110 Author: Sergei Poselenov <sposelenov@emcraft.com>
24111 Date: Wed Apr 30 11:42:50 2008 +0200
24113 Initial support for "Socrates" board
24115 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
24117 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
24118 Author: Yuri Tikhonov <yur@emcraft.com>
24119 Date: Thu May 8 15:46:42 2008 +0200
24121 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
24123 This way we become able to utilize the full post_log_word for POST
24124 activities (overwise, POST ECC, which has 0x8000 ID, could be
24125 erroneously treated as started in post_output_backlog() even if there
24126 was actually no POST ECC run (because of OCM POST failure, for
24129 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24131 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
24132 Author: Yuri Tikhonov <yur@emcraft.com>
24133 Date: Thu May 8 15:46:02 2008 +0200
24135 POST: mark OCM test as POST_STOP
24137 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
24139 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
24140 Author: Yuri Tikhonov <yur@emcraft.com>
24141 Date: Thu May 8 15:45:26 2008 +0200
24143 POST: add POST_STOP flag
24145 Don't run futher tests in case of a test fails that is marked as
24148 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
24149 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24151 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
24152 Author: Yuri Tikhonov <yur@emcraft.com>
24153 Date: Thu May 8 15:44:16 2008 +0200
24155 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
24157 Switch the OCM testid with the codec one. The reason is that current
24158 implementation requires the POST_ROM testid to fit into lower 16
24159 bits, and the codec test will never run with POST_ROM hopefully.
24161 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
24163 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
24164 Author: Yuri Tikhonov <yur@emcraft.com>
24165 Date: Thu May 8 15:43:28 2008 +0200
24167 lwmon5: enable OCM post test on lwmon5 board
24169 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
24171 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
24172 Author: Yuri Tikhonov <yur@emcraft.com>
24173 Date: Thu May 8 15:42:47 2008 +0200
24175 POST: OCM test added.
24177 Added OCM test to POST layer. This version runs before all other tests
24178 but doesn't yet interrupt post sequence on failure.
24180 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
24181 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24183 commit 6891260bdd935a382c95d9fa333922b0dfded68a
24184 Author: Yuri Tikhonov <yur@emcraft.com>
24185 Date: Thu May 8 15:40:39 2008 +0200
24189 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
24191 commit 727f63334676e760877d43bfb8f0e9331ac8b101
24192 Author: Hebbar <gururajakr@sanyo.co.in>
24193 Date: Tue May 20 02:16:36 2008 -0700
24195 common/usb.c: fix incorrect escape sequence
24197 Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
24199 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
24200 Author: York Sun <yorksun@freescale.com>
24201 Date: Thu May 15 15:26:27 2008 -0500
24203 Fix 8313ERDB board configuration
24205 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
24206 Correct TSEC1 vs TSEC2 assignment.
24207 Define ETHADDR and ETH1ADDR always.
24209 Signed-off-by: York Sun <yorksun@freescale.com>
24210 Signed-off-by: Timur Tabi <timur@freescale.com>
24212 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
24213 Author: Jon Loeliger <jdl@freescale.com>
24214 Date: Mon May 19 09:47:25 2008 -0500
24216 mpc86xx: Removed unused and unconfigured memory test code.
24218 Besides, other common code exists.
24220 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24222 commit 180a90abdae72587c0f679edf8991455e559440d
24223 Author: Wolfgang Denk <wd@denx.de>
24224 Date: Mon May 19 12:47:11 2008 +0200
24228 Update CHANGELOG for release.
24230 Signed-off-by: Wolfgang Denk <wd@denx.de>
24232 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
24233 Author: Stefan Roese <sr@denx.de>
24234 Date: Mon May 19 07:14:38 2008 +0200
24236 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
24238 When SATA is selected (via jumper J6) we need to disable the first PCIe
24239 node in the device tree, so that Linux doesn't initialize it. Otherwise
24240 the Linux SATA driver will fail to detect the devices.
24242 The same goes the other way around too. So if PCIe is selected we need
24243 to disable the SATA node in the device tree.
24245 This is because PCIe port 0 and SATA on 460EX share the same pins
24246 (multiplexed) and we have to configure in U-Boot which peripheral is
24249 Signed-off-by: Stefan Roese <sr@denx.de>
24251 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
24252 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24253 Date: Sun May 18 19:09:58 2008 +0200
24255 i386: Fix multiple definitions of __show_boot_progress
24257 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24259 commit 311f3446930c1e64c12026c1cfd00500b05be52d
24260 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24261 Date: Sun May 18 19:09:57 2008 +0200
24263 sc530_spunk: add missing SOBJS entry
24265 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24267 commit a559317143b4f95927b08cd388707e6f077e95fa
24268 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24269 Date: Sun May 18 19:09:56 2008 +0200
24271 sc520_spunk: Fix flash
24273 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
24274 flash.c:398: error: label at end of compound statement
24276 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24278 commit 91f221317af64191ee8caf303ea9305943158691
24279 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24280 Date: Sun May 18 19:09:49 2008 +0200
24282 drivers/pcmcia: add missing i82365
24284 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24286 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
24287 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24288 Date: Sun May 18 19:09:47 2008 +0200
24290 i386/bootm: remove unused var
24292 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24294 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
24295 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24296 Date: Sun May 18 19:09:45 2008 +0200
24298 example/gitignore: update with all generated examples
24300 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24302 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
24303 Author: Wolfgang Denk <wd@denx.de>
24304 Date: Thu May 15 00:42:45 2008 +0200
24306 TQM8272: fix out-of-tree building
24308 ...and add to MAKEALL script
24310 Signed-off-by: Wolfgang Denk <wd@denx.de>
24312 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
24313 Author: Wolfgang Denk <wd@denx.de>
24314 Date: Wed May 14 23:34:53 2008 +0200
24316 environment: fix bug introduced by commit a8409f4f1ac8
24318 env_get_char is not a function, but a pointer to one.
24320 Signed-off-by: Wolfgang Denk <wd@denx.de>
24322 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
24323 Author: Gary Jennejohn <garyj@denx.de>
24324 Date: Wed May 14 13:39:22 2008 +0200
24326 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
24328 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
24329 use a redundant environment.
24331 Signed-off-by: Gary Jennejohn <garyj@denx.de>
24333 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
24334 Author: Wolfgang Denk <wd@denx.de>
24335 Date: Wed May 14 13:55:30 2008 +0200
24337 Fix config files for out-of-tree building
24339 Several board/<...>/config.mk files include dynamically built (by
24340 the Makefile) config files but used the wrong file name of
24341 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
24342 instead if the correct
24343 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
24345 The bug is nasty because the build result is correct for the (normal)
24346 in-tree builds, and because 'sinclude' is used no errors get raised
24347 even for out-of-tree build tests. But out-of-tree builds use an
24348 incomplete and thus usually incorrect configuration...
24350 Signed-off-by: Wolfgang Denk <wd@denx.de>
24352 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
24353 Author: Stefan Roese <sr@denx.de>
24354 Date: Wed May 14 13:40:03 2008 +0200
24356 ppc4xx: Fix bogus Canyonlands config.mk
24358 This patch fixes the canyonlands config.mk file to enable correct
24359 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
24361 Signed-off-by: Stefan Roese <sr@denx.de>
24363 commit fdd1247a66d788a3446244f6fde9955a93c26322
24364 Author: Stefan Roese <sr@denx.de>
24365 Date: Wed May 14 10:32:32 2008 +0200
24367 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
24369 Canyonlands has a file ddr2_fixed.c which needs special treatment when
24370 building in separate directory. It has to be linked to build directory
24371 otherwise it is not seen.
24373 Signed-off-by: Stefan Roese <sr@denx.de>
24375 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
24376 Author: Wolfgang Denk <wd@denx.de>
24377 Date: Wed May 14 12:22:49 2008 +0200
24379 environment: cleanup prototype declarations of env functions.
24381 Signed-off-by: Wolfgang Denk <wd@denx.de>
24383 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
24384 Author: Wolfgang Denk <wd@denx.de>
24385 Date: Wed May 14 12:21:48 2008 +0200
24387 linkstation_HGLAN: Fix out of tree building.
24389 Signed-off-by: Wolfgang Denk <wd@denx.de>
24391 commit 085551c05ca09e6c491ea11a1c6727a36776a545
24392 Author: Stefan Roese <sr@denx.de>
24393 Date: Wed May 14 10:32:32 2008 +0200
24395 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
24397 Canyonlands has a file ddr2_fixed.c which needs special treatment when
24398 building in separate directory. It has to be linked to build directory
24399 otherwise it is not seen.
24401 Signed-off-by: Stefan Roese <sr@denx.de>
24403 commit 1510b82d50615f344e89d42533e8224cce067dc0
24404 Author: Wolfgang Denk <wd@denx.de>
24405 Date: Tue May 13 23:15:52 2008 +0200
24407 Makefile: fix "error: version_autogenerated.h: No such file or directory"
24409 Signed-off-by: Wolfgang Denk <wd@denx.de>
24411 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
24412 Author: Stelian Pop <stelian@popies.net>
24413 Date: Tue May 13 17:31:24 2008 +0200
24415 Cleanup nand_info[] declaration.
24417 The nand_info array is declared as extern in several .c files.
24418 Those days, nand.h contains a reference to the array, so there is
24419 no need to declare it elsewhere.
24421 Signed-off-by: Stelian Pop <stelian@popies.net>
24422 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24424 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
24425 Author: Stefan Roese <sr@denx.de>
24426 Date: Tue May 13 20:22:01 2008 +0200
24428 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
24430 Signed-off-by: Stefan Roese <sr@denx.de>
24432 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
24433 Author: Wolfgang Denk <wd@denx.de>
24434 Date: Mon May 12 01:11:21 2008 +0200
24436 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
24438 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
24439 which broke many PowerPC boards.
24441 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
24442 Author: Wolfgang Denk <wd@denx.de>
24443 Date: Mon May 12 00:56:28 2008 +0200
24445 Revert "Avoid initrd and logbuffer area overlaps"
24447 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
24448 which breaks building on all PPC boards that don't use a log buffer.
24450 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
24451 Author: Nick Spence <nick.spence@freescale.com>
24452 Date: Sat May 10 14:02:04 2008 -0700
24454 Fix offset calculation for multi-type legacy images.
24456 Calculation of tail was incorrect when size % 4 == 0.
24458 New code removes the conditional and does the same thing but with arithmetic
24460 Signed-off-by: Nick Spence <nick.spence@freescale.com>
24462 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
24463 Author: Wolfgang Denk <wd@denx.de>
24464 Date: Mon May 12 00:40:58 2008 +0200
24466 Revert "Change env_get_char from a global function ptr to a function."
24468 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
24469 which is known to break booting from dataflash and NAND.
24471 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
24472 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24473 Date: Sun May 11 23:13:57 2008 +0200
24475 API: remove duplicate syscall check
24477 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24479 commit 67e3beb52c320b0a31cf030716c99392cde2d532
24480 Author: Stelian Pop <stelian@popies.net>
24481 Date: Fri May 9 21:46:51 2008 +0200
24483 AT91: Cleanup unused config header file definitions.
24485 CONFIG_ENV_OVERWRITE is commented out in the config header files,
24486 so let's cleanup the files by removing the whole definition.
24488 Signed-off-by: Stelian Pop <stelian@popies.net>
24489 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24491 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
24492 Author: Stelian Pop <stelian@popies.net>
24493 Date: Thu May 8 14:52:34 2008 +0200
24495 Support AT91CAP9 revC CPUs
24497 The AT91CAP9 revC CPU has a few differences over the previous,
24498 revB CPU which was distributed in small quantities only (revA was
24499 an internal Atmel product only).
24501 The revC silicon needs a special initialisation sequence to
24502 switch from the internal (imprecise) RC oscillator to the
24503 external 32k clock.
24505 Signed-off-by: Stelian Pop <stelian@popies.net>
24506 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24508 commit 098b7b4b441b12c2a64dd517930f43c793542759
24509 Author: Stelian Pop <stelian@popies.net>
24510 Date: Thu May 8 14:52:33 2008 +0200
24512 Use custom logo for Atmel boards
24514 This patch adds a custom vendor logo for the Atmel AT91 boards.
24516 Signed-off-by: Stelian Pop <stelian@popies.net>
24517 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24519 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
24520 Author: Stelian Pop <stelian@popies.net>
24521 Date: Thu May 8 14:52:32 2008 +0200
24523 AT91SAM9RLEK: hook up the ATMEL LCD driver
24525 This patch makes the necessary adaptations (PIO configurations and
24526 defines in config header file) to hook up the Atmel LCD driver to the
24527 AT91SAM9RLEK board.
24529 Signed-off-by: Stelian Pop <stelian@popies.net>
24530 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24532 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
24533 Author: Stelian Pop <stelian@popies.net>
24534 Date: Thu May 8 14:52:31 2008 +0200
24536 AT91SAM9263EK: hook up the ATMEL LCD driver
24538 This patch makes the necessary adaptations (PIO configurations and
24539 defines in config header file) to hook up the Atmel LCD driver to the
24540 AT91SAM9263EK board.
24542 Signed-off-by: Stelian Pop <stelian@popies.net>
24543 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24545 commit 820f2a958325061a446115f3035e48e4726b3390
24546 Author: Stelian Pop <stelian@popies.net>
24547 Date: Thu May 8 14:52:30 2008 +0200
24549 AT91SAM9261EK: hook up the ATMEL LCD driver
24551 This patch makes the necessary adaptations (PIO configurations and
24552 defines in config header file) to hook up the Atmel LCD driver to the
24553 AT91SAM9261EK board.
24555 Signed-off-by: Stelian Pop <stelian@popies.net>
24556 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24558 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
24559 Author: Stelian Pop <stelian@popies.net>
24560 Date: Thu May 8 14:52:29 2008 +0200
24562 AT91CAP9ADK: hook up the ATMEL LCD driver
24564 This patch makes the necessary adaptations (PIO configurations and
24565 defines in config header file) to hook up the Atmel LCD driver to the
24568 Signed-off-by: Stelian Pop <stelian@popies.net>
24569 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24571 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
24572 Author: Stelian Pop <stelian@popies.net>
24573 Date: Fri May 9 21:57:18 2008 +0200
24575 Add ATMEL LCD driver
24577 This patch adds support for the ATMEL LCDC driver which is used on some
24578 AT91 and AVR platforms.
24580 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
24581 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
24583 Signed-off-by: Stelian Pop <stelian@popies.net>
24584 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24586 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
24587 Author: Stelian Pop <stelian@popies.net>
24588 Date: Thu May 8 18:52:25 2008 +0200
24590 AT91SAM9RLEK support
24592 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
24595 Signed-off-by: Stelian Pop <stelian@popies.net>
24596 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24598 commit 8e429b3eee23927c1222679f6b6f53667b21595c
24599 Author: Stelian Pop <stelian@popies.net>
24600 Date: Thu May 8 18:52:23 2008 +0200
24602 AT91SAM9263EK support
24604 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
24607 Signed-off-by: Stelian Pop <stelian@popies.net>
24608 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24610 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
24611 Author: Stelian Pop <stelian@popies.net>
24612 Date: Thu May 8 20:52:22 2008 +0200
24614 AT91SAM9261EK support
24616 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
24619 Signed-off-by: Stelian Pop <stelian@popies.net>
24620 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24622 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
24623 Author: Stelian Pop <stelian@popies.net>
24624 Date: Thu May 8 20:52:21 2008 +0200
24626 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
24628 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
24629 in order to cope with the changes in DataFlash partitionning scheme
24632 Signed-off-by: Stelian Pop <stelian@popies.net>
24633 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24635 commit 96996ac25d5222611a8888968db6e53a6d3726da
24636 Author: Stelian Pop <stelian@popies.net>
24637 Date: Thu May 8 20:52:20 2008 +0200
24639 AT91SAM9260EK: Normalize BOOTARGS
24641 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
24642 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
24645 Signed-off-by: Stelian Pop <stelian@popies.net>
24646 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24648 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
24649 Author: Stelian Pop <stelian@popies.net>
24650 Date: Thu May 8 20:52:19 2008 +0200
24652 AT91SAM9260EK: Normalize SPI timings
24654 This patch changes the SPI timings to closely match the ones
24655 used by the Linux kernel and the Atmel's own bootstrap project.
24657 Signed-off-by: Stelian Pop <stelian@popies.net>
24658 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24660 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
24661 Author: Stelian Pop <stelian@popies.net>
24662 Date: Thu May 8 20:52:18 2008 +0200
24664 AT91SAM9260EK: Handle 8 or 16 bit NAND
24666 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
24667 makes the support configurable in the board config header file
24668 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
24670 Signed-off-by: Stelian Pop <stelian@popies.net>
24671 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24673 commit ab52640fc01624e208424e527af0b7b3a5a65a12
24674 Author: Stelian Pop <stelian@popies.net>
24675 Date: Thu May 8 20:52:17 2008 +0200
24677 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
24679 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
24680 in order to cope with the changes in DataFlash partitionning scheme
24683 Signed-off-by: Stelian Pop <stelian@popies.net>
24684 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24686 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
24687 Author: Stelian Pop <stelian@popies.net>
24688 Date: Thu May 8 20:52:16 2008 +0200
24690 AT91CAP9ADK: Normalize BOOTARGS
24692 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
24693 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
24696 Signed-off-by: Stelian Pop <stelian@popies.net>
24697 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24699 commit 93da48b910511911ce110656e17ed733c8ac4c45
24700 Author: Stelian Pop <stelian@popies.net>
24701 Date: Thu May 8 20:52:15 2008 +0200
24703 AT91CAP9ADK: Normalize SPI timings
24705 This patch changes the SPI timings to closely match the ones
24706 used by the Linux kernel and the Atmel's own bootstrap project.
24708 Signed-off-by: Stelian Pop <stelian@popies.net>
24709 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24711 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
24712 Author: Stelian Pop <stelian@popies.net>
24713 Date: Thu May 8 20:52:14 2008 +0200
24715 AT91CAP9ADK: Handle 8 or 16 bit NAND
24717 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
24718 makes the support configurable in the board config header file
24719 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
24721 Signed-off-by: Stelian Pop <stelian@popies.net>
24722 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24724 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
24725 Author: Stelian Pop <stelian@popies.net>
24726 Date: Thu May 8 20:52:13 2008 +0200
24728 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
24730 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
24731 below avoids the duplication of u-boot.lds by putting the file in the
24732 cpu directory instead of the board one.
24734 Signed-off-by: Stelian Pop <stelian@popies.net>
24735 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24737 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
24738 Author: Stelian Pop <stelian@popies.net>
24739 Date: Thu May 8 20:52:12 2008 +0200
24741 Add proper copyright notices in Atmel boards Makefiles
24743 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
24744 copyright notice. This patch adds the missing pieces.
24746 Signed-off-by: Stelian Pop <stelian@popies.net>
24747 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24749 commit e817a042cef6164bf26fee86f90326f2ec9e6745
24750 Author: Stelian Pop <stelian@popies.net>
24751 Date: Thu May 8 20:52:11 2008 +0200
24753 Add copyright information in Atmel boards partition.c
24755 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
24756 the new created files. This patch fixes the problem.
24758 Signed-off-by: Stelian Pop <stelian@popies.net>
24759 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24761 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
24762 Author: Stelian Pop <stelian@popies.net>
24763 Date: Thu May 8 20:52:10 2008 +0200
24765 Update origin and copyright information in arch-at91sam9 header files
24767 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
24768 copied from the Linux kernel sources. This patch explicitly specifies
24769 this origin for all the copied headers, and for those missing copyright
24770 information, adds it.
24772 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
24773 in the latest kernel sources by 'at91sam9_smc.h'.
24775 The copyright information has been confirmed by the AT91 Linux kernel
24776 maintainer, Andrew Victor <avictor.za@gmail.com>.
24778 Signed-off-by: Stelian Pop <stelian@popies.net>
24779 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24781 commit 79dd1712689d6a5031d7cbff54957049680751c7
24782 Author: Markus Klotzbücher <mk@denx.de>
24783 Date: Thu May 8 16:00:55 2008 +0200
24785 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
24787 When using dhcp/bootp the "netmask" environment variable is not set
24788 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
24789 desireable, so the following patch adds this this option to the board
24792 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
24793 Signed-off-by: Stefan Roese <sr@denx.de>
24795 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
24796 Author: Stefan Roese <sr@denx.de>
24797 Date: Sat May 10 10:30:36 2008 +0200
24799 ppc4xx: Update Makalu defconfig to use device-tree booting as default
24801 This patch reworks the default environment on Makalu. Now "net_nfs" for
24802 example uses the device-tree style booting formerly know as "net_nfs_fdt".
24803 Also the addresses in RAM were changed because of the new image booting
24804 support, which check for image overwriting. So the addresses needed to
24807 Signed-off-by: Stefan Roese <sr@denx.de>
24809 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
24810 Author: Becky Bruce <bgill@freescale.com>
24811 Date: Wed May 7 13:28:16 2008 -0500
24813 PPC: fix map_physmem build warning
24815 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
24816 enabled. This quiets the warning.
24818 Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
24820 commit 36f32675f40292002ee1fed252c180a43022d2d4
24821 Author: Becky Bruce <bgill@freescale.com>
24822 Date: Wed May 7 13:24:57 2008 -0500
24824 Update pci code to use phys_addr_t
24826 Physical addrs need to be represented by phys_addr_t, not
24827 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
24828 are going to fail mightily.
24830 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
24832 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
24833 Author: Nick Spence <nick.spence@freescale.com>
24834 Date: Thu May 8 22:32:22 2008 -0700
24836 Support legacy multi-type images without FDT section.
24838 This patch enables legacy multi-type images containing only a Linux kernel
24839 and root file system to be loaded, maintaining compatibility with previous
24840 versions of u-boot.
24842 This is required when using old image files such as a Linux 2.4 kernel /
24845 Signed-off-by: Nick Spence <nick.spence@freescale.com>
24846 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
24848 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
24849 Author: Wolfgang Denk <wd@denx.de>
24850 Date: Sat May 10 00:38:02 2008 +0200
24854 Signed-off-by: Wolfgang Denk <wd@denx.de>
24856 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
24857 Author: Wolfgang Denk <wd@denx.de>
24858 Date: Sat May 10 00:36:09 2008 +0200
24860 post/cpu/ppc4xx/Makefile: line length cleanup
24862 Signed-off-by: Wolfgang Denk <wd@denx.de>
24864 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
24865 Author: Stelian Pop <stelian@popies.net>
24866 Date: Thu May 8 22:52:09 2008 +0200
24868 Fix @ -> <at> substitution
24870 When applying the AT91CAP9 patches upstream, something transformed
24871 the '@' character into the ' <at> ' sequence.
24873 The patch below restores the original form in all the places where
24874 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
24875 were copied from AT91CAP9, and a couple of other files where the
24876 ' <at> ' sequence was present).
24878 Signed-off-by: Stelian Pop <stelian@popies.net>
24880 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
24881 Author: Stelian Pop <stelian@popies.net>
24882 Date: Thu May 8 22:52:10 2008 +0200
24884 Update origin and copyright information in arch-at91sam9 header files
24886 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
24887 copied from the Linux kernel sources. This patch explicitly specifies
24888 this origin for all the copied headers, and for those missing copyright
24889 information, adds it.
24891 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
24892 in the latest kernel sources by 'at91sam9_smc.h'.
24894 The copyright information has been confirmed by the AT91 Linux kernel
24895 maintainer, Andrew Victor <avictor.za@gmail.com>.
24897 Signed-off-by: Stelian Pop <stelian@popies.net>
24899 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
24900 Author: Stelian Pop <stelian@popies.net>
24901 Date: Thu May 8 22:52:11 2008 +0200
24903 Add copyright information in Atmel boards partition.c
24905 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
24906 the new created files. This patch fixes the problem.
24908 Signed-off-by: Stelian Pop <stelian@popies.net>
24910 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
24911 Author: Guennadi Liakhovetski <lg@denx.de>
24912 Date: Thu May 8 10:09:27 2008 +0200
24914 mx31ads: fix 32kHz clock handling
24916 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
24917 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
24918 Also fix a typo when verifying a jumper configuration. While at it, make
24919 two needlessly global functions static.
24921 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
24923 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
24924 Author: Marian Balakowicz <m8@semihalf.com>
24925 Date: Wed May 7 13:10:04 2008 +0200
24927 Avoid initrd and logbuffer area overlaps
24929 Add logbuffer to reserved LMB areas to prevent initrd allocation
24930 from overlaping with it.
24932 Make sure to use correct logbuffer base address.
24934 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24936 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
24937 Author: Marian Balakowicz <m8@semihalf.com>
24938 Date: Wed May 7 13:08:54 2008 +0200
24940 ppc: Cleanup get_effective_memsize() use
24942 Removed duplicated effective memory size calculation code.
24944 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24946 commit 273c37d843d5b581090378016cd12dd9c586907b
24947 Author: Marian Balakowicz <m8@semihalf.com>
24948 Date: Wed May 7 09:03:53 2008 +0200
24950 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
24952 Recent modifcations to LOGBUFFER handling code were incorrecly
24953 introduced to fit_check_kernel() routine during
24954 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
24955 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
24957 This patch cleans up this merge issue.
24959 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24961 commit bc11756daff89a3de09ca80adac962b88cf06e6e
24962 Author: Grant Erickson <gerickson@nuovations.com>
24963 Date: Tue May 6 20:16:15 2008 -0700
24965 Propagate Error Status to the Shell on fw_printenv Errors
24967 Changed implementation such that fw_printenv returns failure status
24968 when one or more specified variables do not exist or when incorrect
24969 command syntax is used.
24971 This aids scripting fw_printenv such that the script can key of the
24972 return status rather than relying on standard error "scraping".
24974 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24975 Signed-off-by: Wolfgang Denk <wd@denx.de>
24977 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
24978 Author: Grant Erickson <gerickson@nuovations.com>
24979 Date: Tue May 6 16:18:00 2008 -0700
24981 Fix Compilation Errors with 'tools/env/fw_printenv'
24983 In the current top-of-tree, 1.3.3.-rc2, the optional tool
24984 'tools/env/fw_printenv' fails to compile for two reasons:
24986 1) The header watchdog.h cannot be found.
24987 2) The header zlib.h is picked up from the tool chain rather than the
24988 project causing a prototype conflict for crc32.
24990 This patch addresses both of these issues.
24992 Platforms Tested On:
24995 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24997 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
24998 Author: James Yang <James.Yang@freescale.com>
24999 Date: Mon May 5 10:22:53 2008 -0500
25001 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
25003 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
25004 work before relocating to RAM because command history is written into
25005 a global array that is not writable before relocation. This patch
25006 defers to the no-editing and no-history code in readline_into_buffer()
25007 if it is called before relocation.
25009 Signed-off-by: James Yang <James.Yang@freescale.com>
25010 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25012 commit 726c0f1e5f108dccea052965123b95837d2bd402
25013 Author: Detlev Zundel <dzu@denx.de>
25014 Date: Mon May 5 16:11:22 2008 +0200
25016 cosmetic: Adjust coding style for switch statements to be consistent
25018 Signed-off-by: Detlev Zundel <dzu@denx.de>
25020 commit 574b319512b13e10800f0045e39b993f4ca25e42
25021 Author: Detlev Zundel <dzu@denx.de>
25022 Date: Mon May 5 16:11:21 2008 +0200
25024 Fix disk type output in disk/part.c
25026 Signed-off-by: Detlev Zundel <dzu@denx.de>
25028 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
25029 Author: Vlad Lungu <vlad.lungu@windriver.com>
25030 Date: Mon May 5 14:20:03 2008 +0300
25032 Mail address change, documentation modified
25034 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
25036 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
25037 Author: Michal Simek <monstr@monstr.eu>
25038 Date: Sun May 4 15:42:41 2008 +0200
25040 microblaze: Repare intc handling
25042 Signed-off-by: Michal Simek <monstr@monstr.eu>
25044 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
25045 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25046 Date: Sun May 4 15:17:52 2008 +0200
25048 include/gitignore: update to all architectures
25050 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25052 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
25053 Author: Marcel Ziswiler <marcel@ziswiler.com>
25054 Date: Mon May 5 02:12:06 2008 +0200
25056 ide: Remove spurious second include of io.h
25058 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
25060 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25062 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
25063 Author: Adrian Filipi <adrian.filipi@eurotech.com>
25064 Date: Tue May 6 16:46:37 2008 -0400
25068 This patch fixes three typos.
25069 The first is a repetition of CONFIG_CMD_BSP.
25070 The second makes the #endif comment match its #if.
25071 The third is a spelling error.
25073 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
25075 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
25076 Author: Grant Erickson <gerickson@nuovations.com>
25077 Date: Sun May 4 16:45:01 2008 -0700
25079 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
25081 Add support for the recognition of 'powerpc' as an alias for the PowerPC
25082 architecture type since Linux is already trending in that direction,
25083 preferring 'powerpc' to 'ppc'.
25085 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
25087 commit f5a24259190c388c2527bdc49fee34577d862cc7
25088 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
25089 Date: Fri May 2 13:35:15 2008 -0700
25091 7450 and 86xx L2 cache invalidate bug corrections
25093 The 7610 and related parts have an L2IP bit in the L2CR that is
25094 monitored to signal when the L2 cache invalidate is complete whereas the
25095 7450 and related parts utilize L2I for this purpose. However, the
25096 current code does not account for this difference. Additionally the 86xx
25097 L2 cache invalidate code used an "andi" instruction where an "andis"
25098 instruction should have been used.
25100 This patch addresses both of these bugs.
25102 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
25103 Acked-By: Jon Loeliger <jdl@freescale.com>
25105 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
25106 Author: Wolfgang Denk <wd@denx.de>
25107 Date: Fri May 9 10:16:13 2008 +0200
25109 Avoid infinite loop "Generating include/autoconf.mk"
25111 Fix a bogus circular dependency that caused an infinite loop of
25112 "Generating include/autoconf.mk" again and again.
25114 Signed-off-by: Wolfgang Denk <wd@denx.de>
25116 commit 567fb852178dbf59529d7301620a3f3732a4b02d
25117 Author: Stelian Pop <stelian@popies.net>
25118 Date: Thu May 8 22:52:09 2008 +0200
25120 Fix @ -> <at> substitution
25122 When applying the AT91CAP9 patches upstream, something transformed
25123 the '@' character into the ' <at> ' sequence.
25125 The patch below restores the original form in all the places where
25126 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
25127 were copied from AT91CAP9, and a couple of other files where the
25128 ' <at> ' sequence was present).
25130 Signed-off-by: Stelian Pop <stelian@popies.net>
25131 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25133 commit 73ccb3410a0785593cda7aee455dfc51f790e281
25134 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
25135 Date: Mon Apr 28 14:04:32 2008 +0200
25137 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
25139 Signed-off-by: Gary Jennejohn <garyj@denx.de>
25140 Signed-off-by: Stefan Roese <sr@denx.de>
25142 commit ef2642625cbfb1c3695e3478d08ae515052a4950
25143 Author: Stefan Roese <sr@denx.de>
25144 Date: Thu May 8 11:10:46 2008 +0200
25146 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
25148 Signed-off-by: Stefan Roese <sr@denx.de>
25150 commit a00eccfebc954ad9485161efeca7d9aaf626d530
25151 Author: Stefan Roese <sr@denx.de>
25152 Date: Thu May 8 11:05:15 2008 +0200
25154 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
25156 This patch adds fdt (flattened device tree) support to all remaining AMCC
25157 eval boards. Most newer boards already support device tree. With this patch,
25158 all AMCC boards now enable device tree passing from U-Boot to Linux
25159 arch/powerpc kernels.
25161 Signed-off-by: Stefan Roese <sr@denx.de>
25163 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
25164 Author: Stefan Roese <sr@denx.de>
25165 Date: Thu May 8 11:01:09 2008 +0200
25167 ppc4xx: Add weak default ft_board_setup() routine
25169 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
25170 This routine is defined as weak and can be overwritten by a board specific
25173 Signed-off-by: Stefan Roese <sr@denx.de>
25175 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
25176 Author: Stefan Roese <sr@denx.de>
25177 Date: Thu May 8 10:48:58 2008 +0200
25179 ppc4xx: acadia: Add fdt support and fix section overlap problem
25181 This patch adds fdt (flattened device tree) support to the AMCC
25182 Acadia eval board. This increases the image size and it doesn't
25183 fit anymore into 256kByte. Since we didn't want to remove features
25184 from the configuration, we decided to increase the U-Boot image size
25185 (add one flash sector).
25187 Also changed the default environment definition to make it
25188 independent of such changes.
25190 Signed-off-by: Stefan Roese <sr@denx.de>
25192 commit 4adb3023de75bc150f088c8935db340930ad38c8
25193 Author: Ira Snyder <iws@ovro.caltech.edu>
25194 Date: Tue Apr 29 11:18:54 2008 -0700
25196 ppc4xx: Add device tree support to AMCC Yosemite
25198 Add support for booting with a device tree blob. This is needed to boot
25199 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
25200 via the ethaddr variable.
25202 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
25203 Signed-off-by: Stefan Roese <sr@denx.de>
25205 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
25206 Author: Dave Mitchell <dmitchell@amcc.com>
25207 Date: Wed May 7 09:00:23 2008 -0700
25209 ppc4xx: Fix typos in 460GT/EX FBDV array
25211 Corrected two typos in the 460GT/EX FBDV array.
25213 Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
25214 Signed-off-by: Stefan Roese <sr@denx.de>
25216 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
25217 Author: Andy Fleming <afleming@freescale.com>
25218 Date: Wed May 7 16:54:31 2008 -0500
25220 85xx: Limit CPU2 workaround to parts that have the errata
25222 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
25223 Signed-off-by: Andy Fleming <afleming@freescale.com>
25225 commit a5fe514e8ace564300d2c1d73846ddff49654243
25226 Author: Lee Nipper <lee.nipper@freescale.com>
25227 Date: Fri Apr 25 15:44:45 2008 -0500
25229 mpc83xx: system performance settings for MPC8349EMDS.
25231 These same settings are used on MPC8349ITX, and
25232 improve performance on MPC8349EMDS.
25234 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
25235 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25237 commit 49387dba910e485640b575e920ee463b7e611dc3
25238 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25239 Date: Tue May 6 13:22:52 2008 +0900
25241 [MIPS] cpu/mips/cache.S: Fix build warning
25243 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
25244 warns illegal global symbol references by bal (and jal also) instruction.
25245 This does not happen with the latest binutils v2.18.
25247 Here's an example on gth2_config:
25249 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
25250 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
25251 c -EB -c -o cache.o cache.S
25252 cache.S: Assembler messages:
25253 cache.S:243: Warning: Pretending global symbol used as branch target is local.
25254 cache.S:250: Warning: Pretending global symbol used as branch target is local.
25256 In principle, gas might be sensitive to global symbol references in PIC
25257 code because they should be processed through GOT (global offset table).
25258 But if `bal' instruction is used, it results in PC-based offset jump.
25259 This is the cause of this warning.
25261 In practice, we know it doesn't matter whether PC-based reference or GOT-
25262 based. As for this case, both will work before/after relocation. But let's
25265 This patch explicitly sets up a target address, then jump there.
25266 Here's an example of disassembled code with/without this patch.
25268 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
25269 9000066c: ac80fffc sw zero,-4(a0)
25270 90000670: 01402821 move a1,t2
25271 -90000674: 0411ffba bal 90000560 <mips_init_icache>
25272 -90000678: 01803021 move a2,t4
25273 -9000067c: 01602821 move a1,t3
25274 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
25275 -90000684: 01a03021 move a2,t5
25276 -90000688: 03000008 jr t8
25277 -9000068c: 00000000 nop
25278 +90000674: 01803021 move a2,t4
25279 +90000678: 8f8f83ec lw t7,-31764(gp)
25280 +9000067c: 01e0f809 jalr t7
25281 +90000680: 00000000 nop
25282 +90000684: 01602821 move a1,t3
25283 +90000688: 01a03021 move a2,t5
25284 +9000068c: 8f8f81e0 lw t7,-32288(gp)
25285 +90000690: 01e0f809 jalr t7
25286 +90000694: 00000000 nop
25287 +90000698: 03000008 jr t8
25288 +9000069c: 00000000 nop
25290 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25292 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
25293 Author: Vlad Lungu <vlad.lungu@windriver.com>
25294 Date: Mon May 5 14:04:00 2008 +0300
25296 Allow building mips versions with ELDK 3.1.1
25298 .gpword works only with local symbols on certain binutils versions
25300 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
25302 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
25303 Author: Wolfgang Denk <wd@denx.de>
25304 Date: Mon May 5 12:52:36 2008 +0200
25306 MAKEALL: add inka4x0 board
25308 Signed-off-by: Wolfgang Denk <wd@denx.de>
25310 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
25311 Author: Wolfgang Denk <wd@denx.de>
25312 Date: Sun May 4 21:34:23 2008 +0200
25314 kb9202 board: fix build problem.
25316 Signed-off-by: Wolfgang Denk <wd@denx.de>
25318 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
25319 Author: Wolfgang Denk <wd@denx.de>
25320 Date: Sun May 4 12:10:33 2008 +0200
25322 Prepare for v1.3.3-rc3
25324 Update ChNAGELOG, minor white space cleanup.
25326 Signed-off-by: Wolfgang Denk <wd@denx.de>
25328 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
25329 Author: Wolfgang Denk <wd@denx.de>
25330 Date: Sun May 4 00:35:15 2008 +0200
25332 drivers/net/tsec.c: Fix typo.
25334 Signed-off-by: Wolfgang Denk <wd@denx.de>
25336 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
25337 Author: Mike Frysinger <vapier@gentoo.org>
25338 Date: Fri May 2 21:45:12 2008 -0400
25340 version_autogenerated.h: use printf rather than echo -n
25342 Some systems are dumb and do not implement the -n flag to echo (like OS X).
25343 Convert the Makefile to use printf as this should work everywhere.
25345 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
25346 Signed-off-by: Wolfgang Denk <wd@denx.de>
25348 commit 4acc2a108ad0a669165924704a6cb083f9138242
25349 Author: Mike Frysinger <vapier@gentoo.org>
25350 Date: Fri May 2 18:17:50 2008 -0400
25352 fix building when saveenv is disabled in some setups
25354 If you enable environment in the flash, but disable the embedded
25355 option, and you disable the saveenv command, then the #if nested
25356 logic will trigger a compile failure:
25357 env_flash.c: In function 'env_relocate_spec':
25358 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
25359 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
25361 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
25363 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
25364 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
25365 Date: Fri May 2 16:10:04 2008 -0400
25367 SBC8548: fix address mask to allow 64M flash
25369 Fix incorrect mask to enable all 64MB of onboard flash.
25370 Previously U-Boot incorrectly mapped only 8MB of flash, this
25371 patch correctly maps all the available flash.
25373 Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
25375 commit 3648085c464c8c22ef76fab006ca4344d3796124
25376 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25377 Date: Fri May 2 19:48:56 2008 +0200
25379 qemu_mips: add README
25381 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25383 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
25384 Author: Marcel Ziswiler <marcel@ziswiler.com>
25385 Date: Fri May 2 02:35:59 2008 +0200
25387 Fix misspelled comment
25389 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25391 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
25392 Author: Mike Frysinger <vapier@gentoo.org>
25393 Date: Thu May 1 04:13:05 2008 -0400
25395 mkimage: make mmap() checks consistent
25397 The mmap() related code is full of inconsistent casts/constants when
25398 it comes to error checking, and may break when building on some
25399 systems (like ones that do not implicitly define the caddr_t type).
25400 Let's just avoid the whole mess by writing the code nice and clean in
25403 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
25405 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
25406 Author: Marcel Ziswiler <marcel@ziswiler.com>
25407 Date: Thu May 1 09:05:34 2008 +0200
25409 Fix defined but not used build warning
25411 - warning: 'srom' defined but not used
25413 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25415 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
25416 Author: Marcel Ziswiler <marcel@ziswiler.com>
25417 Date: Thu May 1 09:05:26 2008 +0200
25419 Fix implicit declaration build warnings
25421 - warning: implicit declaration of function ‘serial_initialize’
25423 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25425 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
25426 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
25427 Date: Tue Apr 29 19:18:32 2008 +0200
25429 TSEC: add config options for VSC8601 RGMII PHY
25431 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
25432 and Tx clock lines. They are configured using 2 bits in extended
25434 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
25435 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
25437 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
25438 Acked-by: Andy Fleming <afleming@freescale.com>
25439 Acked-by: Ben Warren <biggerbadderben@gmail.com>
25442 drivers/net/tsec.c | 6 ++++++
25443 drivers/net/tsec.h | 3 +++
25444 2 files changed, 9 insertions(+), 0 deletions(-)
25446 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
25447 Author: Wolfgang Denk <wd@denx.de>
25448 Date: Sat May 3 23:07:15 2008 +0200
25450 Revert "ColdFire: Get information from the correct GCC"
25452 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
25453 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
25455 commit c4e5f52a58d278eebb87f476e353972c5dacea40
25456 Author: Wolfgang Denk <wd@denx.de>
25457 Date: Sat May 3 22:25:00 2008 +0200
25459 config.mk: use correct (cross) compiler
25461 Some config.mk files reference $(CC) to test for specific tool chain
25462 features, so make sure $(CC) gets set before including any such
25465 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
25468 Signed-off-by: Wolfgang Denk <wd@denx.de>
25470 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
25471 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25472 Date: Thu May 1 02:13:44 2008 +0200
25474 pxa: fix previous definition on cpu init
25476 start.S:183:1: warning: "ICMR" redefined
25477 In file included from start.S:33:
25478 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
25479 start.S:187:1: warning: "RCSR" redefined
25482 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25484 commit 6d12e697de794d700767f22f950e3026ccf4daf6
25485 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25486 Date: Thu May 1 02:13:43 2008 +0200
25488 pxa: fix pcmcia operation on 'i' may be undefined
25490 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25491 Signed-off-by: Wolfgang Denk <wd@denx.de>
25493 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
25494 Author: Kumar Gala <galak@kernel.crashing.org>
25495 Date: Wed Apr 30 16:24:35 2008 -0500
25497 MPC8610HPCD: Drop -O2 from the build flags
25499 Make the flags use -Os like all other boards
25501 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25503 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
25504 Author: Stefan Roese <sr@denx.de>
25505 Date: Wed Apr 30 15:50:39 2008 +0200
25507 RTC: Fix month offset by one problem in M41T62 RTC driver
25509 This patch fixes a problem with the month being read and written
25510 incorrectly (offset by one). This only gets visible by also using
25511 the Linux driver (rtc-m41t80).
25513 Tested on AMCC Canyonlands.
25515 Signed-off-by: Stefan Roese <sr@denx.de>
25517 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
25518 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25519 Date: Sat May 3 13:51:44 2008 +0900
25521 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
25523 Current trick to pick up GNU assembler minor version uses a dot(.) as a
25524 delimiter, and take the second field to obtain minor version number. But
25525 as can be expected, this doesn't work with a version string which has
25526 dots more than needs.
25530 $ mips-linux-gnu-as --version | grep 'GNU assembler'
25531 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
25532 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
25536 This patch restricts the version format to 2.XX.XX... This will work
25539 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
25541 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
25545 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25547 commit ea638951acead7f1086c908c0b9f086beab82a22
25548 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25549 Date: Sat May 3 13:51:28 2008 +0900
25551 [MIPS] cpu/mips/cache.S: Add dcache_enable
25553 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
25554 "allow ports to override bootelf behavior") requires ports to have this
25557 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25558 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25560 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
25561 Author: Wolfgang Denk <wd@denx.de>
25562 Date: Thu May 1 21:30:16 2008 +0200
25564 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
25566 Onenand needs a version of memcpy() which performs 16 bit accesses
25567 only; make sure the name does not conflict with the standard
25570 Signed-off-by: Wolfgang Denk <wd@denx.de>
25572 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
25573 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25574 Date: Wed Apr 30 22:38:17 2008 +0200
25576 cmd_nand: fix warning: str2long ncompatible pointer type
25578 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25580 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
25581 Author: Timur Tabi <timur@freescale.com>
25582 Date: Fri Apr 4 11:16:11 2008 -0500
25584 Fix calculation of I2C clock for some 86xx chips
25586 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
25587 There is no pattern that can be used to determine which chips use which
25588 frequency, so the only way to determine is to look up the actual SOC
25589 designation and use the right value for that SOC.
25591 Signed-off-by: Timur Tabi <timur@freescale.com>
25593 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
25594 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25595 Date: Wed Apr 30 12:11:19 2008 -0500
25597 ColdFire: Fix ethernet hang issue for mcf547x_8x
25599 The ethernet hang is caused by receiving buffer in DRAM is not
25600 yet ready due to access cycles require longer time in DRAM.
25601 Relocate DMA buffer descriptors from DRAM to internal SRAM.
25603 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25605 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
25606 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25607 Date: Wed Apr 30 12:10:47 2008 -0500
25609 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
25611 Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
25612 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25614 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
25615 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25616 Date: Wed Apr 30 12:10:23 2008 -0500
25618 ColdFire: Get information from the correct GCC
25620 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
25621 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25623 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
25624 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
25625 Date: Wed Apr 30 18:02:59 2008 +0200
25627 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
25631 nv_nand.c: In function 'saveenv':
25632 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
25633 env_nand.c: In function 'env_relocate_spec':
25634 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
25636 if compiled for davinci_schmoogie_config.
25638 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
25639 Ack by: Sergey Kubushyn <ksi@koi8.net>
25641 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
25642 Author: Anatolij Gustschin <agust@denx.de>
25643 Date: Wed Apr 30 13:34:40 2008 +0200
25645 Fix warnings while compiling net/net.c for MPC8610HPCD board
25647 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
25648 causing overriding default -Os option. New gcc (ver. 4.2.2)
25649 produces warnings while compiling net/net.c file with -O2
25650 option. The patch is an attempt to fix this.
25652 Signed-off-by: Anatolij Gustschin <agust@denx.de>
25654 commit 58b575e575c25fdf8c88141e145db201f3092149
25655 Author: Sascha Laue <Sascha.Laue@gmx.biz>
25656 Date: Wed Apr 30 15:23:38 2008 +0200
25658 lwmon5: fix offset error in sysmon0 POST
25660 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
25661 Signed-off-by: Wolfgang Denk <wd@denx.de>
25663 commit e7419b243a373de4ee042f7d4f45f66de787240d
25664 Author: Sascha Laue <Sascha.Laue@gmx.biz>
25665 Date: Wed Apr 30 15:16:35 2008 +0200
25667 lwmon5: fix manual merge error in POST
25669 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
25671 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
25672 Author: Wolfgang Denk <wd@denx.de>
25673 Date: Wed Apr 30 17:46:26 2008 +0200
25675 cmd_nand.c: fix another 'incompatible pointer type' warning.
25677 Signed-off-by: Wolfgang Denk <wd@denx.de>
25679 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
25680 Author: Wolfgang Denk <wd@denx.de>
25681 Date: Wed Apr 30 17:25:07 2008 +0200
25683 Makefile: fix parallel builds
25685 This problem shows up with parallel builds only; it results in
25686 somewhat cryptic error messages like
25688 $ JOBS=-j6 MAKEALL netstar
25689 Configuring for netstar board...
25690 arm-linux-ld: cannot find -lgeneric
25691 make[1]: *** [eeprom.srec] Error 1
25693 A few boards (like netstar and voiceblue) need some libraries for
25694 building; however, the board Makefile does not contain any such
25695 dependencies which may cause problems with parallel builds. Adding
25696 such dependencies is difficult as we would also have to provide build
25697 rules, which already exist in the respective library Makefiles.
25699 To solve this, we make sure that all libraries get built before the
25702 Signed-off-by: Wolfgang Denk <wd@denx.de>
25704 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
25705 Author: Stefan Roese <sr@denx.de>
25706 Date: Wed Apr 30 14:51:36 2008 +0200
25708 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
25710 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
25711 used for NAND booting to match the values needed for the new 512MB
25712 DIMM modules shipped with the productions boards:
25714 Crucial: CT6464AC667.8FB
25716 Signed-off-by: Stefan Roese <sr@denx.de>
25718 commit ea9202a659dc75996facf1475f1866a19a9d3129
25719 Author: Stefan Roese <sr@denx.de>
25720 Date: Wed Apr 30 10:49:43 2008 +0200
25722 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
25724 This patch fixes a problem with DIMMs that have 8 banks. Now the
25725 MCIF0_MBxCF register will be setup correctly for this setup too.
25727 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
25729 Signed-off-by: Stefan Roese <sr@denx.de>
25731 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
25732 Author: Wolfgang Denk <wd@denx.de>
25733 Date: Tue Apr 29 23:41:06 2008 +0200
25735 Prepare v1.3.3-rc2, again.
25737 Signed-off-by: Wolfgang Denk <wd@denx.de>
25739 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
25740 Author: Wolfgang Denk <wd@denx.de>
25741 Date: Tue Apr 29 23:35:24 2008 +0200
25745 Signed-off-by: Wolfgang Denk <wd@denx.de>
25747 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
25748 Author: Wolfgang Denk <wd@denx.de>
25749 Date: Tue Apr 29 23:32:20 2008 +0200
25751 common/env_nand.c: fix one more incompatible pointer type issue
25753 Signed-off-by: Wolfgang Denk <wd@denx.de>
25755 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
25756 Author: Wolfgang Denk <wd@denx.de>
25757 Date: Tue Apr 29 21:33:08 2008 +0200
25759 post/board/lwmon5/sysmon.c: fix manual merge error.
25761 Signed-off-by: Wolfgang Denk <wd@denx.de>
25763 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
25764 Author: Kumar Gala <galak@kernel.crashing.org>
25765 Date: Tue Apr 29 12:54:59 2008 -0500
25767 85xx: Add -mno-spe to e500/85xx builds
25769 Newer gcc's might be configured to enable autovectorization by default.
25770 If we happen to build with one of those compilers we will get SPE
25771 instructions in random code.
25773 -mno-spe disables the compiler for automatically generating SPE
25774 instructions without our knowledge.
25776 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25778 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
25779 Author: Kumar Gala <galak@kernel.crashing.org>
25780 Date: Tue Apr 29 10:18:34 2008 -0500
25782 Update .gitignore for zlib.h
25784 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25786 commit 45239cf4152109caa925145ccd433529902df887
25787 Author: Kumar Gala <galak@kernel.crashing.org>
25788 Date: Tue Apr 29 10:27:08 2008 -0500
25790 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
25792 All the 85xx and 86xx UM describe the register as timing_cfg_3
25795 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25797 commit ef7d30b14394e4c4a153118f5845760cadada02a
25798 Author: Kumar Gala <galak@kernel.crashing.org>
25799 Date: Tue Apr 29 10:28:34 2008 -0500
25801 85xx/86xx: Rename DDR init address and init extended address register
25803 Rename init_addr and init_ext_addr to match the docs between
25804 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
25806 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25808 commit cf6cc014270549684873a5972d2595052c468cb6
25809 Author: Kumar Gala <galak@kernel.crashing.org>
25810 Date: Mon Apr 28 02:24:04 2008 -0500
25812 85xx: Additional fixes and cleanup of MP code
25814 * adjust __spin_table alignment to match ePAPR v0.94 spec
25815 * loop over all cpus when determing who is up. This fixes an issue if
25816 the "boot cpu" isn't core0. The "boot cpu" will already be in the
25817 cpu_up_mask so there is no harm
25818 * Added some protection in the code to ensure proper behavior. These
25819 changes are explicitly needed but don't hurt:
25820 - Added eieio to ensure the "hot word" of the table is written after
25821 all other table updates have occurred.
25822 - Added isync to ensure we don't prefetch loading of table entries
25823 until we a released
25825 These issues we raised by Dave Liu.
25827 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25829 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
25830 Author: Yuri Tikhonov <yur@emcraft.com>
25831 Date: Tue Apr 29 15:06:41 2008 +0200
25833 lwmon5: minor clean-up to include/configs/lwmon5.h
25835 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
25836 the CFG_DSPIC_TEST_ADDR definition more readable.
25838 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
25840 commit f4c4d21a885ccc222fd0acdf653b683249e85117
25841 Author: Stefan Roese <sr@denx.de>
25842 Date: Tue Apr 29 16:08:05 2008 +0200
25844 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
25846 Signed-off-by: Stefan Roese <sr@denx.de>
25848 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
25849 Author: Yuri Tikhonov <yur@emcraft.com>
25850 Date: Tue Apr 29 13:32:45 2008 +0200
25852 ppc flush_cache: add watch-dog triggering into the loops.
25854 Some boards (e.g. lwmon5) need rather a frequent watch-dog
25855 kicking. Since the time it takes for the flush_cache() function
25856 to complete its job depends on the size of data being flushed, one
25857 may encounter watch-dog resets on such boards when, for example,
25858 download big files over ethernet.
25860 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
25862 commit cab99d6f3281ab6784feccf98b9b425daa58418a
25863 Author: Stefan Roese <sr@denx.de>
25864 Date: Tue Apr 29 14:44:54 2008 +0200
25866 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
25868 Signed-off-by: Stefan Roese <sr@denx.de>
25870 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
25871 Author: Stefan Roese <sr@denx.de>
25872 Date: Tue Apr 29 14:12:07 2008 +0200
25874 ppc4xx: Fix Katmai CFG_MONITOR_LEN
25876 Signed-off-by: Stefan Roese <sr@denx.de>
25878 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
25879 Author: Stefan Roese <sr@denx.de>
25880 Date: Tue Apr 29 13:57:07 2008 +0200
25882 ppc4xx: Complete remove bogus dflush()
25884 Since the current dflush() implementation is know to have some problems
25885 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
25886 it by using clean_dcache_range().
25888 Tested on Katmai with ECC DIMM.
25890 Signed-off-by: Stefan Roese <sr@denx.de>
25892 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
25893 Author: Stefan Roese <sr@denx.de>
25894 Date: Tue Apr 29 13:36:51 2008 +0200
25896 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
25898 As it seems the "old" ECC initialization routine by using dflush() didn't
25899 write all lines in the dcache back to memory on lwmon5. This could lead
25900 to ECC error upon Linux booting. This patch changes the program_ecc()
25901 routine to now use clean_dcache_range() instead of dflush().
25902 clean_dcache_range() uses dcbst which is exactly what we want in this
25905 Since dflush() is known is cause problems, this routine will be
25906 removed completely and replaced by clean_dcache_range() with an
25909 Signed-off-by: Stefan Roese <sr@denx.de>
25911 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
25912 Author: Yuri Tikhonov <yur@emcraft.com>
25913 Date: Mon Apr 28 18:19:34 2008 +0200
25915 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
25917 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
25919 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
25920 Author: Markus Brunner <super.firetwister@googlemail.com>
25921 Date: Mon Apr 28 08:47:47 2008 +0200
25923 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
25925 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
25926 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
25929 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
25931 commit 2ef7503a593c77a80c2a054011970227c4b62774
25932 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25933 Date: Thu Apr 24 07:57:17 2008 +0200
25935 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
25937 Move non-inlied functions into specific drivers file
25938 Set get_prom as weak
25940 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25941 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
25942 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25944 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
25945 Author: Guennadi Liakhovetski <lg@denx.de>
25946 Date: Thu Apr 3 17:04:19 2008 +0200
25948 net: make ARP timeout configurable
25950 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
25951 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
25952 to the boards get lost, which typically are ARP replies. By configuring
25953 the timeout to a lower value we significantly improve the first network
25954 transfer time on this board. The timeout is specified in milliseconds,
25955 later internally it is converted to deciseconds, because it has to be
25956 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
25959 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25960 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25962 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
25963 Author: Guennadi Liakhovetski <lg@denx.de>
25964 Date: Thu Apr 3 13:36:18 2008 +0200
25966 minor cs8900 driver clean up
25968 Remove a redundant register definition, clean up some coding style
25971 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25972 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25974 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
25975 Author: Wolfgang Denk <wd@denx.de>
25976 Date: Mon Apr 28 22:01:04 2008 +0200
25978 jffs2_1pass.c: fix incompatible pointer type warning
25980 Signed-off-by: Wolfgang Denk <wd@denx.de>
25982 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
25983 Author: Sascha Laue <Sascha.Laue@gmx.biz>
25984 Date: Tue Apr 1 10:10:18 2008 +0200
25986 lwmon5: update dsPIC POST spezification
25988 The specification for the lwmon5 board dsPIC POST got changed.
25989 Also add defines for the temperatures and voltages.
25991 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
25993 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
25994 Author: Sascha Laue <Sascha.Laue@gmx.biz>
25995 Date: Tue Apr 1 15:13:03 2008 +0200
25997 Fix watchdog POST for lwmon5
25999 If the hardware watchdog detects a voltage error, the watchdog sets
26000 GPIO62 to low. The watchdog POST has to detect this low level.
26002 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
26003 Signed-off-by: Wolfgang Denk <wd@denx.de>
26005 commit dd5748bcd669f46aeb6686c1b341323843738ccc
26006 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26007 Date: Mon Apr 28 14:37:14 2008 +0200
26009 rtl8169: fix compiler warnings
26011 Fix multiple compiler warnings related to argument type mismatch.
26013 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26015 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
26016 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26017 Date: Mon Apr 28 14:36:06 2008 +0200
26019 IDE: fix compiler warnings
26021 The IDE driver can use 32-bit addresses in LBA mode, in which case it
26022 spits multiple warnings during compilation. Fix them.
26024 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26026 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
26027 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26028 Date: Mon Apr 28 14:35:57 2008 +0200
26030 LinkStation: fix compiler warning, add a maintainer
26032 out_8 wants a pointer to an unsigned as the first argument. Add a
26033 maintainer for Linkstation boards.
26035 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26037 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
26038 Author: Wolfgang Denk <wd@denx.de>
26039 Date: Mon Apr 28 14:55:12 2008 +0200
26041 cmd_nand.c: fix "differ in signedness" problem
26043 Signed-off-by: Wolfgang Denk <wd@denx.de>
26045 commit f2c288a35341ad02ac03b1563d786763c9c8f159
26046 Author: Wolfgang Denk <wd@denx.de>
26047 Date: Mon Apr 28 12:48:47 2008 +0200
26049 pcnet.c: fix a merge issue
26051 Signed-off-by: Wolfgang Denk <wd@denx.de>
26053 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
26054 Author: Wolfgang Denk <wd@denx.de>
26055 Date: Mon Apr 28 12:08:18 2008 +0200
26057 NAND: fix some strict-aliasing compiler warnings
26059 Signed-off-by: Wolfgang Denk <wd@denx.de>
26061 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
26062 Author: Stefan Roese <sr@denx.de>
26063 Date: Mon Apr 28 11:37:14 2008 +0200
26065 ppc4xx: Fix compile warning of hcu4 board
26067 Signed-off-by: Stefan Roese <sr@denx.de>
26069 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
26070 Author: Wolfgang Denk <wd@denx.de>
26071 Date: Mon Apr 28 11:31:23 2008 +0200
26073 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
26075 Signed-off-by: Wolfgang Denk <wd@denx.de>
26077 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
26078 Author: Guennadi Liakhovetski <lg@denx.de>
26079 Date: Mon Apr 28 00:25:32 2008 +0200
26081 mx31ads: fix loadaddr environment variable define
26083 Arithmetic expressions do not get evaluated under stringification. Remove
26084 default network configuration, add DHCP command support. Thanks to Felix
26085 Radensky for reporting.
26087 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
26089 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
26090 Author: Wolfgang Denk <wd@denx.de>
26091 Date: Mon Apr 28 10:55:24 2008 +0200
26093 katmai: fix section overlap problem
26095 Since we didn't want to remove features from the configuration, we
26096 decided to increase the U-Boot image size (add one flash sector).
26098 Also changed the default environment definition to make it
26099 independent of such changes.
26101 Signed-off-by: Wolfgang Denk <wd@denx.de>
26102 Acked-by: Stefan Roese <sr@denx.de>
26104 commit 941d696d25624e3cc65ebf924199541acf52d74e
26105 Author: Wolfgang Denk <wd@denx.de>
26106 Date: Mon Apr 28 10:55:24 2008 +0200
26108 katmai: fix section overlap problem
26110 Since we didn't want to remove features from the configuration, we
26111 decided to increase the U-Boot image size (add one flash sector).
26113 Also changed the default environment definition to make it
26114 independent of such changes.
26116 Signed-off-by: Wolfgang Denk <wd@denx.de>
26117 Acked-by: Stefan Roese <sr@denx.de>
26119 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
26120 Author: Kumar Gala <galak@kernel.crashing.org>
26121 Date: Sat Apr 26 11:44:44 2008 -0500
26123 post: Fix building with O=
26125 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26127 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
26128 Author: Wolfgang Denk <wd@denx.de>
26129 Date: Sat Apr 26 01:55:00 2008 +0200
26133 Signed-off-by: Wolfgang Denk <wd@denx.de>
26135 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
26136 Author: Wolfgang Denk <wd@denx.de>
26137 Date: Sat Apr 26 01:25:39 2008 +0200
26139 post/Makefile: make sure to use the correct flags
26141 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
26142 messages to be printed.
26144 Signed-off-by: Wolfgang Denk <wd@denx.de>
26146 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
26147 Author: Wolfgang Denk <wd@denx.de>
26148 Date: Sat Apr 26 00:34:42 2008 +0200
26150 Coding Style cleanup, update CHANGELOG
26152 Signed-off-by: Wolfgang Denk <wd@denx.de>
26154 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
26155 Author: Magnus Lilja <lilja.magnus@gmail.com>
26156 Date: Sun Apr 20 10:38:12 2008 +0200
26158 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
26160 This patch enables SPI and MC13783/RTC support for the Litekit board.
26162 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
26164 commit f97abbfb47d9e407354e157cae3f6369e460cd37
26165 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
26166 Date: Fri Apr 25 01:08:32 2008 -0500
26168 MPC8544DS: decode pcie3 end-point configuration correctly.
26170 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
26171 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26173 commit 292188e15523c165c4269403fdcd33c26d89176e
26174 Author: Roy Zang <tie-fei.zang@freescale.com>
26175 Date: Fri Apr 25 00:55:09 2008 -0500
26177 MPC8544DS: Removes the unknown flash message information
26179 This patch removes the unknown flash message information:
26180 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
26181 This unknown flash message is caused by PromJet.
26182 Some of the board user is unhappy with this information.
26184 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26185 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26187 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
26188 Author: Kim Phillips <kim.phillips@freescale.com>
26189 Date: Thu Apr 24 14:07:38 2008 -0500
26191 mpc83xx: bump loadaddr over fdtaddr to 0x500000
26193 this seems as a good compromise between human memory, typing,
26194 and last but not least, to accommodate for current and future kernel bloat.
26196 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26197 Acked-by: Dave Liu <daveliu@freescale.com>
26199 commit be5a7190265a34d968578ff266549c60f6f57654
26200 Author: Dave Liu <r63238@freescale.com>
26201 Date: Tue Apr 15 13:12:23 2008 +0800
26203 mpc83xx: clean up the readme for 83xx boards
26205 1. correct the typo
26206 2. correct the memory map for 837xerdb board
26208 Signed-off-by: Dave Liu <daveliu@freescale.com>
26210 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
26211 Author: Dave Liu <r63238@freescale.com>
26212 Date: Tue Apr 15 13:11:11 2008 +0800
26214 mpc83xx: remove the unused CPM's stuff
26216 The MPC83xx family never have CPM block, so remove it from 83xx.
26218 Signed-off-by: Dave Liu <daveliu@freescale.com>
26220 commit c63ad6325a8ac0097a54b418a3288926b0484b18
26221 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26222 Date: Fri Apr 18 16:29:40 2008 +0200
26224 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
26226 This patch adds a configurable flash auto protection list that can be used
26227 to make U-Boot protect flash regions in flash_init().
26229 The idea has been discussed on the u-boot mailing list starting
26232 Even this patch brings a new feature it is used as a bugfix for 4xx
26233 platforms where flash_init() does not completely protect the
26234 monitor's flash range in all situations.
26236 U-Boot protects the flash range from CFG_MONITOR_BASE to
26237 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
26238 include the reset vector at 0xfffffffc.
26241 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
26243 This config option will auto protect the last 512k of flash that
26244 contains the bootloader on board like APC405 and PMC405.
26246 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26248 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
26249 Author: Stefan Roese <sr@denx.de>
26250 Date: Fri Apr 25 13:59:03 2008 +0200
26252 ppc4xx: Remove double defines in lwmon5.h
26254 introduced with latest lwmon5/POST merge
26256 Signed-off-by: Stefan Roese <sr@denx.de>
26258 commit 7590378fb9c686709492ceb142825cd058255956
26259 Author: Bartlomiej Sieka <tur@semihalf.com>
26260 Date: Fri Apr 25 13:54:02 2008 +0200
26262 Use watchdog-aware functions when calculating hashes of images - take two
26264 Some files didn't get updated properly with the "Use watchdog-aware
26265 functions when calculating hashes of images" commit, this commit
26268 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
26269 Signed-off-by: Wolfgang Denk <wd@denx.de>
26271 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
26272 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26273 Date: Fri Apr 25 12:01:39 2008 +0200
26275 ppc4xx: Add bootcount limit handling for APC405 boards
26277 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26279 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
26280 Author: Bartlomiej Sieka <tur@semihalf.com>
26281 Date: Fri Apr 25 12:10:09 2008 +0200
26283 Use watchdog-aware functions when calculating hashes of images
26285 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
26287 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
26288 Author: Wolfgang Denk <wd@denx.de>
26289 Date: Fri Apr 25 12:44:08 2008 +0200
26291 USB: fix more GCC 4.2.x aliasing warnings
26293 Signed-off-by: Wolfgang Denk <wd@denx.de>
26294 Acked-by: Markus Klotzbuecher <mk@denx.de>
26296 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
26297 Author: Wolfgang Denk <wd@denx.de>
26298 Date: Fri Apr 25 12:41:53 2008 +0200
26300 lib_generic/crc32.c: add missing #include <watchdog.h>
26302 Signed-off-by: Wolfgang Denk <wd@denx.de>
26304 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
26305 Author: Wolfgang Denk <wd@denx.de>
26306 Date: Fri Apr 25 11:52:21 2008 +0200
26308 lib_generic/crc32.c: fix compile problem
26310 Signed-off-by: Wolfgang Denk <wd@denx.de>
26312 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
26313 Author: Stefan Roese <sr@denx.de>
26314 Date: Tue Apr 22 12:20:32 2008 +0200
26316 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
26318 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
26319 environment variable will now get passed to the Linux kernel by setting
26320 the device_type property of the PCIe device tree node. For normal root-
26321 complex configuration it will keep its defaults value of "pci" and for
26322 endpoint configuration it will get changed to "pci-endpoint".
26324 Signed-off-by: Stefan Roese <sr@denx.de>
26326 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
26327 Author: Yuri Tikhonov <yur@emcraft.com>
26328 Date: Thu Apr 24 10:30:53 2008 +0200
26330 lwmon5: watchdog POST fix
26332 Use the GPT0_MASKx registers as the temporary storage for watch-dog
26333 timer POST test instead of GPT0_COMPx. The latter
26334 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
26336 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26337 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
26339 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
26340 Author: Kim Phillips <kim.phillips@freescale.com>
26341 Date: Mon Apr 21 18:10:14 2008 -0500
26343 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
26345 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
26346 proven problematic getting right from the start at least on 83xx and
26349 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26351 commit a99715b8ebfc500f3f40e01b36b64d473938443d
26352 Author: Detlev Zundel <dzu@denx.de>
26353 Date: Fri Apr 18 14:50:01 2008 +0200
26355 Realining some header definitions.
26357 Signed-off-by: Detlev Zundel <dzu@denx.de>
26359 commit 4acbc6c7f993cae409c424615415a3e76820f13d
26360 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26361 Date: Thu Apr 24 07:57:16 2008 +0200
26363 NE2000: coding style cleanup
26365 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26367 commit b4aff1ffaf7120032c653357c007faa14f74d29d
26368 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26369 Date: Wed Apr 23 00:11:47 2008 +0900
26371 qemu-mips.h: Add CFI support
26373 CONFIG_ENV_OVERWRITE is also added.
26375 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
26377 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26378 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26380 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
26381 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26382 Date: Tue Apr 22 22:47:27 2008 +0900
26384 doc/README.mips: Add MIPS notes
26386 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26388 commit 215b01bba8bc662d35f72b084700b192d367dfb4
26389 Author: Bartlomiej Sieka <tur@semihalf.com>
26390 Date: Tue Apr 22 12:27:56 2008 +0200
26392 Add support for calculating hashes with watchdog triggering
26394 Implement watchodg-aware variants of hash calculation functions:
26398 The above functions calculate the hash of the input buffer in chunks,
26399 triggering the watchdog after processing each chunk. The chunk size
26400 is given as a function call parameter.
26402 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
26404 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
26405 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
26406 Date: Wed Apr 23 11:02:12 2008 +0900
26408 qemu-mips: Cleanup whitespace, indentation, etc.
26410 No functional change.
26412 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
26413 Then I re-created from scratch, and changed more lines than the original.
26415 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26416 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26418 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
26419 Author: Vlad Lungu <vlad@comsys.ro>
26420 Date: Wed Oct 10 23:02:09 2007 +0300
26422 Fixed pcnet io_base
26424 Bus and phys address are not always the same
26426 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
26428 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
26429 Author: Wolfgang Denk <wd@denx.de>
26430 Date: Thu Apr 24 23:44:26 2008 +0200
26432 drivers/net/pcnet.c: Coding Style cleanup.
26434 Signed-off-by: Wolfgang Denk <wd@denx.de>
26436 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
26437 Author: Vlad Lungu <vlad@comsys.ro>
26438 Date: Wed Oct 10 23:04:23 2007 +0300
26440 Added Am79C970A chip id to pcnet
26442 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
26444 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
26445 Author: Magnus Lilja <lilja.magnus@gmail.com>
26446 Date: Sun Apr 20 10:35:03 2008 +0200
26448 i.MX31: Fix architecture numbers for ADS and Litekit boards
26450 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
26452 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
26454 commit e7ae84d6c7288790e88639f57cb60daf89c11369
26455 Author: Magnus Lilja <lilja.magnus@gmail.com>
26456 Date: Sun Apr 20 10:36:36 2008 +0200
26458 i.MX31: Use symbolic names for Litekit membases.
26460 Use symbolic names instead of hard coded addresses for Litekit membases.
26462 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
26464 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
26465 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26466 Date: Sat Apr 19 17:59:20 2008 +0200
26468 Fix show_boot_progress prototype
26470 in commit fad634071 "make show_boot_progress () weak."
26471 show_boot_progress is supposed to be declared as weak but declared as
26474 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26476 commit edbed247a14d70b94958010f736621212285de91
26477 Author: Bartlomiej Sieka <tur@semihalf.com>
26478 Date: Fri Apr 18 12:39:23 2008 +0200
26480 Memory footprint optimizations
26482 As suggested by Wolfgang Denk:
26483 - image printing functions:
26485 - remove indentation prefix from functions' signatures
26486 - merge getenv_verify and getenv_autostart into one parametrized function
26488 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
26490 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
26491 Author: Guennadi Liakhovetski <lg@denx.de>
26492 Date: Tue Apr 15 13:33:11 2008 +0200
26494 MX31ADS environment variable update, spi and rtc support
26496 Update MX31ADS default environment to better match the flash layout and
26497 the memory map, support SPI and RTC.
26499 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
26501 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
26502 Author: Kumar Gala <galak@kernel.crashing.org>
26503 Date: Mon Apr 21 09:28:36 2008 -0500
26505 85xx: Round up frequency calculations to get reasonable output
26507 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
26509 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
26511 Signed-off-by: Dejan Minic <minic@freescale.com>
26512 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
26513 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26514 Acked-by: Andy Fleming <afleming@freescale.com>
26516 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
26517 Author: Kumar Gala <galak@kernel.crashing.org>
26518 Date: Wed Apr 23 16:58:04 2008 -0500
26520 fsl_pci: Only modify registers if we have them
26522 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
26524 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26526 commit 83fe32334337def160b302aa9d152d808bfcc68e
26527 Author: Markus Klotzbücher <mk@denx.de>
26528 Date: Wed Apr 23 10:57:33 2008 +0200
26530 USB: remove a cpu bug workaround for an unsupported architecture.
26532 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
26534 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
26535 Author: Markus Klotzbücher <mk@denx.de>
26536 Date: Wed Apr 23 10:53:23 2008 +0200
26538 USB: fix those pesky aliasing warnings issued by gcc-4.2
26540 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
26541 Signed-off-by: Detlev Zundel <dzu@denx.de>
26543 commit 89cdab788f3716b335fefb60b836ebcf975aceab
26544 Author: Mike Frysinger <vapier@gentoo.org>
26545 Date: Mon Mar 31 11:02:01 2008 -0400
26547 crc32: use uint32_t rather than unsigned long
26549 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
26550 this is done with the build toolchain instead of the target tool
26551 chain, so if the build is a 64bit system but the target is 32bits,
26552 the size will obviously be wrong. This converts all unsigned long
26553 stuff related to crc32 to uint32_t types. Compile tested only: output
26554 of ./tools/envcrc when run on a 32bit build system matches that of a
26555 64bit build system.
26557 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26558 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26560 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
26561 Author: Dirk Behme <dirk.behme@googlemail.com>
26562 Date: Wed Mar 26 09:53:29 2008 +0100
26564 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
26566 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
26570 - Remove *_masked() functions as noted by Wolfgang
26572 - Adapt register naming to recent TI spec (sprue26, March 2007)
26574 - Fix reset_timer() handling
26576 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
26578 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
26580 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
26582 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
26584 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
26586 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
26587 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
26589 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
26590 Author: Sergei Poselenov <sposelenov@emcraft.com>
26591 Date: Wed Apr 9 16:09:41 2008 +0200
26593 Added watchdog triggering calls in the "mtest" test function.
26595 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26597 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
26598 Author: Yuri Tikhonov <yur@emcraft.com>
26599 Date: Sun Apr 6 19:19:14 2008 +0200
26601 lwmon5 watchdog: limit trigger rate
26603 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
26604 the CONFIG_WD_MAX_RATE value.
26606 Note that an earlier version of this patch which used microseconds
26607 instead of ticks dis not work. The problem was that we used
26608 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
26609 get_tbclk(), which in turn calls get_sys_info(). It turns out that
26610 this function does a lot of prolonged operations (like divisions)
26611 which take too much time so we do not trigger the watchdog in time,
26612 and it resets the system.
26614 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
26616 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
26617 Author: Yuri Tikhonov <yur@emcraft.com>
26618 Date: Mon Mar 31 10:51:37 2008 +0200
26620 POST: move CONFIG_POST to Makefiles
26622 Introduce the new logical option CONFIG_HAS_POST which is set when the
26623 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
26624 to determine should the POST libs be compiled for the selected target
26627 To avoid breaking u-boot linking process, the empty post/libpost.a file is
26628 created for platforms which do not have POSTs.
26630 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
26631 Signed-off-by: Wolfgang Denk <wd@denx.de>
26633 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
26634 Author: Yuri Tikhonov <yur@emcraft.com>
26635 Date: Mon Mar 31 10:49:34 2008 +0200
26637 POST: preparations for moving CONFIG_POST to Makefiles
26639 Remove CONFIG_POST ifdefs from the post/ source files.
26641 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
26642 Signed-off-by: Wolfgang Denk <wd@denx.de>
26644 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
26645 Author: Stefan Roese <sr@denx.de>
26646 Date: Tue Apr 22 14:14:20 2008 +0200
26648 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
26650 This patch fixes the Canyonlands and Glacier default environment to better
26651 fit to the arch/powerpc device-tree kernels. The variables dealing with
26652 arch/ppc booting are removed, since these boards are supported only in
26653 arch/powerpc. Glacier uses the same config file as Canyonlands.
26655 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
26657 Signed-off-by: Stefan Roese <sr@denx.de>
26659 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
26660 Author: Stefan Roese <sr@denx.de>
26661 Date: Tue Apr 22 14:06:42 2008 +0200
26663 ppc4xx: Small coding style cleanup for the latest esd patches
26665 Signed-off-by: Stefan Roese <sr@denx.de>
26667 commit 79941d63bc03aed8c48d7602f18217cc200ee931
26668 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26669 Date: Mon Apr 21 18:01:07 2008 +0200
26671 ppc4xx: Update CPU strapping for PMC440 boards
26673 This patch removes the temporary 'test' strapping option
26674 of the sbe command. The '667' strapping option now uses
26675 a PLB/PCI divider of 3.
26677 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26679 commit f00cf3193a6635355b121e90debb2f54e777e7da
26680 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26681 Date: Mon Apr 21 14:42:21 2008 +0200
26683 ppc4xx: Remove unused APC405 strataflash driver
26685 The APC405 board support has been migrated to use the common
26688 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26690 commit 1c686676a86473bbd92151f0544e109413f6ed06
26691 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26692 Date: Mon Apr 21 14:42:17 2008 +0200
26694 ppc4xx: Update APC405 configuration
26696 - enable esd's auto_update mechanism
26697 - support alternative flash layout on rev. 1.8 boards
26698 - update default environment
26699 - use common CFI flash driver
26700 - coding style cleanup
26702 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26704 commit 0b9872515a521bf7866dc24b85ddce708e60d702
26705 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26706 Date: Mon Apr 21 14:42:11 2008 +0200
26708 ppc4xx: Update APC405 board support
26710 - enable esd's auto_update mechanism
26711 - fix LCD support on latest hardware revision (uses other LCD controller)
26712 - support alternative flash layout on rev. 1.8 boards
26713 - coding style cleanup
26715 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26717 commit 83975d02e225e231960784972e7820a8b303756b
26718 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26719 Date: Mon Apr 21 14:42:06 2008 +0200
26721 ppc4xx: update esd's common auto_update code for 405 boards
26723 - Coding style cleanup (long lines)
26724 - improve handling of protected flash regions
26727 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26729 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
26730 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26731 Date: Mon Apr 21 14:41:59 2008 +0200
26733 ppc4xx: Update esd's common LCD code for 405 boards
26735 - Coding style cleanup (long lines)
26736 - Add s1d13505 support
26737 - Make some functions return a result code instead of void
26739 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26741 commit dea68189424c3f1242427a8146a3861bf093173c
26742 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26743 Date: Mon Apr 21 11:36:55 2008 +0200
26745 ppc4xx: Update FPGA image for APC405 boards
26747 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26749 commit 2a05b152924acfcec3b037693329e517e6d3578f
26750 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26751 Date: Mon Apr 21 11:36:08 2008 +0200
26753 ppc4xx: Update bootlogo for APC405 boards
26755 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26757 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
26758 Author: Stefan Roese <sr@denx.de>
26759 Date: Fri Apr 18 16:41:31 2008 +0200
26761 ppc4xx: Add dcache_enable() for 440
26763 dcache_enable() was missing for 440 and the patch
26764 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
26765 "] behavior uses this function.
26767 Note: Currently the cache handling functions like
26768 d/icache_disable/enable() are NOP's on 440. This may be changed in the
26771 Signed-off-by: Stefan Roese <sr@denx.de>
26773 commit a49e0d177a0749614b316ec847fb623f09c82c07
26774 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26775 Date: Mon Apr 21 11:19:04 2008 +0200
26777 video: Add missing free for logo memory
26779 This patch adds two missing free()s.
26781 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26783 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
26784 Author: Troy Kisky <troy.kisky@boundarydevices.com>
26785 Date: Mon Sep 24 16:41:43 2007 -0700
26787 PATCH - Fix oob data copied into supplied buffer
26789 This patch correctly sets the oobavail variable
26790 and fixes a bug where the oob data was not valid when
26791 there where multiple groups in oobfree.
26793 First segment fixes a typo
26794 Second segment fixes a bug where oob data may be copied incorrectly.
26795 Third segment adds an error message when exiting due to write protect.
26796 Forth segment fixes a bug where oobavail may be set incorrectly.
26798 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
26800 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
26801 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26802 Date: Fri Apr 18 17:24:32 2008 +0200
26804 ppc4xx: Fix sys_get_info() for 405GP(r)
26806 This patch assigns the correct EBC clock for 405GP(r) CPUs
26807 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
26808 uses an uninitialized EBC clock in its startup message.
26810 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26812 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
26813 Author: Wolfgang Denk <wd@denx.de>
26814 Date: Sun Apr 20 15:39:38 2008 -0700
26816 Makefile: remove nand_spl/System.map when cleaning up.
26818 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
26819 Author: Wolfgang Denk <wd@denx.de>
26820 Date: Sun Apr 20 15:35:52 2008 -0700
26822 MAKEALL: sort entries / lists.
26824 Signed-off-by: Wolfgang Denk <wd@denx.de>
26826 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
26827 Author: Kumar Gala <galak@kernel.crashing.org>
26828 Date: Fri Apr 18 11:29:01 2008 -0500
26830 85xx: Fix size of cpu-release-addr property
26832 The cpu-release-addr is defined as always being a 64-bit quanity regardless
26833 if we are running on a 32-bit or 64-bit machine.
26835 commit 88353a985109562a639b2f8a0c90d77011bfe374
26836 Author: Timur Tabi <timur@freescale.com>
26837 Date: Fri Apr 4 11:15:58 2008 -0500
26839 Fix calculation of I2C clock for some 85xx chips
26841 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
26842 some use CCB/3. There is no pattern that can be used to determine which
26843 chips use which frequency, so the only way to determine is to look up the
26844 actual SOC designation and use the right value for that SOC.
26846 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
26848 Signed-off-by: Timur Tabi <timur@freescale.com>
26850 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
26851 Author: Wolfgang Denk <wd@denx.de>
26852 Date: Fri Apr 18 11:44:27 2008 -0700
26854 Fix build breakage casued by commit c0559be371b2
26856 Change env_get_char from a global function ptr to a function.
26858 Signed-off-by: Wolfgang Denk <wd@denx.de>
26860 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
26861 Author: Wolfgang Denk <wd@denx.de>
26862 Date: Fri Apr 18 10:53:41 2008 -0700
26864 Coding Style cleanup, update CHANGELOG.
26866 Signed-off-by: Wolfgang Denk <wd@denx.de>
26868 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
26869 Author: Mike Frysinger <vapier@gentoo.org>
26870 Date: Tue Apr 8 14:00:57 2008 -0400
26872 Add support for u-boot in svn and localversion-* files
26874 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26876 commit d23ff6827decf121461fbc5622612fd7effe207e
26877 Author: Guennadi Liakhovetski <lg@denx.de>
26878 Date: Thu Apr 3 17:04:22 2008 +0200
26880 MX31ADS network and flash updates
26882 This patch allows U-Boot to use buffered writes to the Spansion NOR
26883 flash installed on this board, and eliminates long delays in network
26884 transfers after the board startup.
26886 Also modify flash layout to embed main and redundant environment
26887 blocks in the U-Boot image.
26889 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
26891 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
26892 Author: Guennadi Liakhovetski <lg@denx.de>
26893 Date: Mon Apr 14 10:53:12 2008 +0200
26895 Support for the MX31ADS evaluation board from Freescale
26897 This patch adds support for the MX31ADS evaluation board from Freescale,
26898 initialization code is copied from RedBoot sources, also provided by
26901 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
26903 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
26904 Author: Stefan Roese <sr@denx.de>
26905 Date: Tue Apr 8 10:33:29 2008 +0200
26907 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
26909 Signed-off-by: Stefan Roese <sr@denx.de>
26911 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
26912 Author: Stefan Roese <sr@denx.de>
26913 Date: Tue Apr 8 10:33:28 2008 +0200
26915 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
26917 Signed-off-by: Stefan Roese <sr@denx.de>
26919 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
26920 Author: Stefan Roese <sr@denx.de>
26921 Date: Tue Apr 8 10:33:27 2008 +0200
26923 ppc4xx: Add Glacier NAND booting target
26925 Signed-off-by: Stefan Roese <sr@denx.de>
26927 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
26928 Author: Stefan Roese <sr@denx.de>
26929 Date: Tue Apr 8 10:31:00 2008 +0200
26931 nand_spl: Update nand_spl to support 2k page size NAND devices
26933 This patch adds support for booting from 2k page sized NAND device
26934 (e.g. Micron 29F2G08AAC).
26936 Tested on AMCC Canyonlands.
26938 Signed-off-by: Stefan Roese <sr@denx.de>
26940 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
26941 Author: Anatolij Gustschin <agust@denx.de>
26942 Date: Thu Apr 17 18:18:00 2008 +0200
26944 Fix crash on sequoia in ppc_4xx_eth_init
26946 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
26947 with cache enabled (TLB Parity exeption). This patch
26950 Signed-off-by: Anatolij Gustschin <agust@denx.de>
26952 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
26953 Author: Anatolij Gustschin <agust@denx.de>
26954 Date: Thu Apr 17 18:15:27 2008 +0200
26956 ppc4xx: Fix crash on sequoia with cache enabled
26958 Currently U-Boot crashes on sequoia board in CPU POST if
26959 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
26960 won't be disabled by change_tlb before CPU POST because
26961 there is an insufficient adress range check since
26962 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
26965 Signed-off-by: Anatolij Gustschin <agust@denx.de>
26967 commit 43c509254fab375c49936498da944658117ed07c
26968 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26969 Date: Thu Apr 17 23:35:13 2008 +0900
26971 Use jr as register jump instruction
26973 Current assembler codes are inconsistent in the way of register jump
26974 instruction usage; some use jr, some use j. Of course GNU as allows both
26975 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
26976 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
26979 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26981 commit 7ce63709828d37b08866e537339a169bd0db2bd3
26982 Author: Guennadi Liakhovetski <lg@denx.de>
26983 Date: Tue Apr 15 14:15:30 2008 +0200
26985 RTC driver for MC13783
26987 MC13783 is a multifunction IS with an SPI interface to the host. This
26988 driver handles the RTC controller in this chip.
26990 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
26992 commit 38254f45b0b412332726c90d3184ad47479fcffb
26993 Author: Guennadi Liakhovetski <lg@denx.de>
26994 Date: Tue Apr 15 14:14:25 2008 +0200
26996 New i.MX31 SPI driver
26998 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
26999 only implemented and tested on i.MX31, can with a modified register layout
27000 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
27003 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27005 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
27006 Author: Magnus Lilja <lilja.magnus@gmail.com>
27007 Date: Tue Apr 15 19:09:10 2008 +0200
27009 Fix name of i.MX31 boards in config file header
27011 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
27013 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
27015 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
27016 Author: Mike Frysinger <vapier@gentoo.org>
27017 Date: Sun Apr 13 19:42:19 2008 -0400
27019 allow ports to override go behavior
27021 Split the arch-specific logic out of the common go code and into a dedicated
27022 weak function called do_go_exec() that lives in cpu directories. This will
27023 need review from i386/nios people to make sure I didn't break them.
27025 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
27026 Author: Mike Frysinger <vapier@gentoo.org>
27027 Date: Sun Apr 13 19:42:18 2008 -0400
27029 allow ports to override bootelf behavior
27031 Change the bootelf setup function into a dedicated weak function called
27032 do_bootelf_exec. This way ports can control the behavior however they
27033 like before/after calling the ELF entry point.
27035 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
27036 Author: Ulf Samuelsson <ulf@atmel.com>
27037 Date: Sat Apr 12 20:56:03 2008 +0200
27039 Reorder ARM boards in Makefile
27041 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
27042 are no longer under ARM92xT header.
27044 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
27045 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27047 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
27048 Author: Ulf Samuelsson <ulf@atmel.com>
27049 Date: Sat Apr 12 20:29:44 2008 +0200
27051 Clean up dataflash partitioning
27053 This patch removes the board dependent parts from
27054 "drivers/mtd/dataflash.c".
27055 Each board relying on this, will have the appropriate
27056 code in a new file, "partition.c" in the board directory.
27057 board Makefiles updated to use the file.
27059 The dataflash partitions are aligned on sector/page boundaries.
27061 The CONFIG_NEW_DF_PARTITION was used to create named partitions
27062 This is now the default operation, and the CONFIG variable is removed.
27064 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
27066 commit 51ecde946fec511a16346e498204ca10ad71080d
27067 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27068 Date: Sat Apr 12 14:08:45 2008 +0200
27070 gitignore: udpate stgit generated and .patch file
27072 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27074 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
27075 Author: Wolfgang Denk <wd@denx.de>
27076 Date: Fri Apr 18 00:15:36 2008 -0700
27078 Get rid of redundant copy of renamed header file.
27080 Signed-off-by: Wolfgang Denk <wd@denx.de>
27082 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
27083 Author: Vlad Lungu <vlad@comsys.ro>
27084 Date: Fri Apr 11 21:20:14 2008 +0300
27086 Fix dependency generation for older gcc versions
27088 With gcc 3.3.3 at least, compilation fails with
27090 Generating include/autoconf.mk
27091 gcc: compilation of header file requested
27092 make: *** [include/autoconf.mk] Error 1
27094 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
27096 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
27098 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
27099 Author: Marian Balakowicz <m8@semihalf.com>
27100 Date: Fri Apr 11 11:07:49 2008 +0200
27102 Restore the ability to continue booting after legacy image overwrite
27104 Before new uImage code was merged, bootm code allowed for the kernel image to
27105 get overwritten during decompresion. new uImage introduced a check for image
27106 overwrites and refused to boot the image that got overwritten. This patch
27107 restores the old behavior. It also adds a warning when the image overwriten is
27108 a multi-image file, because in such case accessing componentes other than the
27109 first one will fail.
27111 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27113 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
27114 Author: Marian Balakowicz <m8@semihalf.com>
27115 Date: Fri Apr 11 11:07:43 2008 +0200
27117 ppc: Fix ftd_blob variable init when processing raw blob
27119 Set fdt_blob variable before its value is printed out.
27121 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27123 commit 3d36be030043cd841a2551d00a395135e363a64b
27124 Author: Jason Wessel <jason.wessel@windriver.com>
27125 Date: Thu Apr 10 14:30:16 2008 -0500
27127 Remove all the search paths from the .lds files.
27129 The cross compiler is responsible for providing the correct libraries
27130 and the logic to find the linking libraries.
27132 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
27134 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
27135 Author: Bartlomiej Sieka <tur@semihalf.com>
27136 Date: Mon Apr 14 15:44:16 2008 +0200
27138 Boot-related documentation update
27140 - document 'bootm_low' and 'bootm_size' environment variables
27141 - update inaccurate CFG_BOOTMAPSZ entry
27143 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
27145 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
27146 Author: Guennadi Liakhovetski <lg@denx.de>
27147 Date: Wed Apr 9 17:34:08 2008 +0200
27149 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
27151 Restore logic reverted by commit
27153 commit 80767a6cead9990d9e77e62be947843c2c72f469
27154 Author: Peter Pearse <peter.pearse@arm.com>
27155 Date: Wed Sep 5 16:04:41 2007 +0100
27157 Changed API name to coloured_led.h
27158 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
27159 Tidied other cpu/arm920t/start.S code
27161 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27163 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
27164 Author: Mike Frysinger <vapier@gentoo.org>
27165 Date: Tue Apr 8 10:24:24 2008 -0400
27167 Remove conflicting NAND ID
27169 There are two NAND entries with ID 0xDC and this obviously causes problems.
27170 In the kernel, they punted the first entry, so we should do the same.
27172 See this upstream e-mail for more info:
27173 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
27175 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
27176 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27178 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
27179 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
27180 Date: Tue Apr 8 16:20:35 2008 +0900
27182 cpu/mips/cpu.c: Fix flush_cache bug
27184 Cache operations have to take line address (addr), not start_addr.
27185 I noticed this bug when debugging ping failure.
27187 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
27189 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
27190 Author: Martin Krause <martin.krause@tqs.de>
27191 Date: Thu Apr 3 14:29:01 2008 +0200
27193 TQM5200: fix default IDE reset level
27195 Before the first call of ide_reset(), the level of the IDE reset
27196 signal on the TQM5200 is low (reset asserted). This patch sets the
27197 default value to high (reset not asserted).
27199 Currently this patch fixes no real problem, but it is cleaner to
27200 assert the reset signal only on demand, and not permanently.
27202 Signed-off-by: Martin Krause <martin.krause@tqs.de>
27204 commit c61e033d6e8abb7b4060ee36060961e1399f6079
27205 Author: Detlev Zundel <dzu@denx.de>
27206 Date: Thu Apr 3 14:18:48 2008 +0200
27208 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
27210 Signed-off-by: Detlev Zundel <dzu@denx.de>
27212 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
27213 Author: Detlev Zundel <dzu@denx.de>
27214 Date: Thu Apr 3 14:18:47 2008 +0200
27216 mgcoge, mgsuv: rename 'addcon' to 'addcons'
27218 The latter name with 13 users is already established, so we will use
27221 Signed-off-by: Detlev Zundel <dzu@denx.de>
27223 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
27224 Author: Martin Krause <martin.krause@tqs.de>
27225 Date: Thu Apr 3 13:37:56 2008 +0200
27227 IDE: fix bug in reset sequence
27229 According to the ata (ata5) specification the RESET- signal
27230 shall be asserted for at least 25 us. Without this patch,
27231 the RESET- signal is asserted on some boards for only < 1 us
27232 (e. g. on the TQM5200). This patch adds a general delay of
27233 25 us to the RESET- signal.
27235 Without this patch a Platinum 4 GiB CF card is not recognised
27236 properly on boards with a TQM5200 (STK52xx, TB5200).
27238 Signed-off-by: Martin Krause <martin.krause@tqs.de>
27240 commit 813bea96a960916c72b4a3a7df840151529c26ce
27241 Author: Sascha Laue <Sascha.Laue@gmx.biz>
27242 Date: Thu Apr 3 14:43:11 2008 +0200
27244 lwmon5: disable CONFIG_ZERO_BOOTDELAY
27246 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
27248 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
27249 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27250 Date: Wed Apr 2 08:03:58 2008 +0200
27252 ds174x: Fix warning on return in rtc_get and rtc_set functions
27254 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27256 commit a253b38bf50c85227c33ca0febc870ee49d1588e
27257 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27258 Date: Wed Apr 2 08:03:57 2008 +0200
27260 cmd_log.c: Fix assignment differ in signedness
27262 In function 'logbuff_init_ptrs':
27263 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
27265 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27267 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
27268 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
27269 Date: Wed Apr 2 11:04:43 2008 +0530
27271 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
27273 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
27275 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
27276 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27277 Date: Tue Apr 1 14:07:10 2008 +0200
27279 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
27281 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27283 commit c08fb3ea36d19b1640b7906264581e9105534399
27284 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
27285 Date: Tue Apr 15 10:24:14 2008 +0200
27287 Additional PCI IDs for IDE and network controllers
27289 These PCI IDs are required by the Linkstation platforms.
27291 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
27293 commit c0559be371b2a64b1a817088c3308688e2182f93
27294 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
27295 Date: Mon Apr 14 23:01:50 2008 +0200
27297 Change env_get_char from a global function ptr to a function.
27299 This avoids an early global data reference.
27301 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
27303 commit 3e0f331c05d72f140715c1e9fca991927e44d422
27304 Author: Guennadi Liakhovetski <lg@denx.de>
27305 Date: Tue Apr 29 12:35:08 2008 +0000
27307 Clean up smsc911x driver
27309 Replace direct register address derefencing with accessor functions.
27310 Restrict explicitly 32-bit bus-width, extend affected configurations
27313 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27314 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27316 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
27317 Author: Sascha Hauer <s.hauer@pengutronix.de>
27318 Date: Tue Apr 15 00:08:20 2008 -0400
27320 This patch adds a driver for the following smsc network controllers:
27328 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
27329 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
27330 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27332 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
27333 Author: Sascha Laue <Sascha.Laue@gmx.biz>
27334 Date: Tue Apr 1 15:13:03 2008 +0200
27336 Fix watchdog POST for lwmon5
27338 If the hardware watchdog detects a voltage error, the watchdog sets
27339 GPIO62 to low. The watchdog POST has to detect this low level.
27341 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
27343 commit 24b448448a917e52806f82660a5c9d47608894fb
27344 Author: Dave Liu <r63238@freescale.com>
27345 Date: Tue Apr 1 15:22:11 2008 +0800
27347 ata: update the libata.h from ata.h of linux kernel
27349 Current libata.h of u-boot is out of sync from linux kernel,
27350 this patch make it be consistent with linux kernel.
27352 Signed-off-by: Dave Liu <daveliu@freescale.com>
27353 Signed-off-by: Tor Krill <tor@excito.com>
27355 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
27356 Author: Kumar Gala <galak@kernel.crashing.org>
27357 Date: Mon Mar 31 11:59:27 2008 -0500
27359 Allow use of ARCH=powerpc when building
27361 The linux kernel is now mostly ARCH=powerpc, so to make life easier
27362 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
27364 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27366 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
27367 Author: Kyungmin Park <kmpark@infradead.org>
27368 Date: Mon Mar 31 10:40:54 2008 +0900
27370 Add apollon board MAINTAINERS entry
27372 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
27374 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
27375 Author: Kyungmin Park <kmpark@infradead.org>
27376 Date: Mon Mar 31 10:40:36 2008 +0900
27380 It should access with 16-bit instead of 8-bit
27382 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
27384 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
27386 commit a9da2b41079d230db3a5641625311983f85ce1fb
27387 Author: Kyungmin Park <kmpark@infradead.org>
27388 Date: Mon Mar 31 10:40:19 2008 +0900
27390 Fix OneNAND erase command
27392 It mis-calculates the block address.
27393 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
27395 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
27397 commit 61525f2ffa156665a66908fda47dbf29d65ea579
27398 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
27399 Date: Mon Mar 31 01:32:15 2008 +0200
27401 Support for LinkStation / KuroBox HD and HG PPC models
27403 This patch is based on the port by Mihai Georgian (see linkstation.c for
27404 Copyright information) and implements support for LinkStation / KuroBox HD
27405 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
27406 the moment, pending network driver fixing.
27408 Notice to users: this is pretty much a barebone port. Support for network
27409 on HG models is already in the U-Boot mainline, but you might also want
27410 patches to switch fan / phy modes depending on the negotiated ethernet
27411 parameters. This patch also doesn't support console switching, booting EM
27412 mode, Buffalo specific ext2 magic number. So, if you want to use any of
27413 those, you need additional patches. Otherwise this patche provides a fully
27414 functional u-boot with a network console on your system.
27416 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27418 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
27419 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
27420 Date: Sun Mar 30 01:22:13 2008 -0500
27422 Add CONFIG_MII_INIT support to related boards
27424 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
27425 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
27426 that use mii_init() in cmd_init.c.
27428 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
27429 Acked-by: Ben Warren <biggerbadderben@gmail.com>
27431 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
27432 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
27433 Date: Sun Mar 30 01:19:06 2008 -0500
27435 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
27437 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
27438 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
27440 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
27442 commit e99ccb488181d012248c6be30b2093e950319fc5
27443 Author: Kumar Gala <galak@kernel.crashing.org>
27444 Date: Thu Mar 27 11:46:38 2008 -0500
27446 Introduce phys_size_t and move phys_addr_t into asm/types.h
27448 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
27449 that have larger physical addresses like 44x, 85xx, and 86xx.
27451 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27453 commit 20a14a42a25f72e379f38460b8a8484667536795
27454 Author: Andy Fleming <afleming@freescale.com>
27455 Date: Wed Apr 2 16:19:07 2008 -0500
27457 Rename include/md5.h to include/u-boot/md5.h
27459 Some systems have md5.h installed in /usr/include/. This isn't the
27460 desired file (we want the one in include/md5.h). This will avoid the
27461 conflict. This fixes the host tools building problem by creating a new
27462 directory for U-Boot specific header files.
27464 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
27467 Signed-off-by: Wolfgang Denk <wd@denx.de>
27468 Signed-off-by: Andy Fleming <afleming@freescale.com>
27469 Acked-by: Timur Tabi <timur@freescale.com>
27471 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
27472 Author: Dave Liu <r63238@freescale.com>
27473 Date: Thu Mar 27 18:51:17 2008 +0800
27475 drivers: code clean up
27477 Signed-off-by: Dave Liu <daveliu@freescale.com>
27479 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
27480 Author: Dave Liu <r63238@freescale.com>
27481 Date: Thu Mar 27 18:50:41 2008 +0800
27483 drivers: clean up the ata_piix.h
27485 Signed-off-by: Dave Liu <daveliu@freescale.com>
27487 commit e8f7ba404f1409606962815ecc955a06984b08b3
27488 Author: Dave Liu <r63238@freescale.com>
27489 Date: Thu Mar 27 18:49:56 2008 +0800
27491 doc: english polishing for README.sata
27493 according to gvb's suggestion, polishing for the doc.
27495 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
27496 Signed-off-by: Dave Liu <daveliu@freescale.com>
27498 commit 3e3f766a5274d204780460e1879723b565296d34
27499 Author: Kumar Gala <galak@kernel.crashing.org>
27500 Date: Wed Mar 26 18:53:28 2008 -0500
27502 Fix warnings introduced by I2C bus speed setting patch
27504 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27506 commit 3c735e7437150e8615f26930c7819db85634276d
27507 Author: eran liberty <eran.liberty@gmail.com>
27508 Date: Thu Mar 27 00:50:49 2008 +0100
27510 Altera Stratix II support
27512 Adds Support for Altera's Stratix II.
27514 Within your board specific init file you will have to call
27516 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
27517 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
27519 Altera_desc* contines (for example):
27521 Altera_StratixII, /* part type */
27522 passive_serial, /* interface type */
27523 1, /* bytes of data part can accept */
27524 (void *)(&funcs), /* interface function table */
27525 0L, /* base interface address */
27526 0 /* implementation specific cookie */
27529 funcs is the interface. It is of type altera_board_specific_func.
27530 It looks like this:
27531 altera_board_specific_func func = {
27542 you will have to implement these functions, which is usually bit
27545 Signed-off-by: Eran Liberty <liberty@extricom.com>
27547 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
27548 Author: Wolfgang Denk <wd@denx.de>
27549 Date: Sun Apr 13 14:32:54 2008 -0700
27553 Signed-off-by: Wolfgang Denk <wd@denx.de>
27555 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
27556 Author: Sascha Hauer <s.hauer@pengutronix.de>
27557 Date: Wed Mar 26 20:41:17 2008 +0100
27559 Phytec Phycore-i.MX31 support
27561 This patch adds support for the Phytec Phycore-i.MX31 board
27563 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
27564 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27566 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
27567 Author: Sascha Hauer <s.hauer@pengutronix.de>
27568 Date: Wed Mar 26 20:41:09 2008 +0100
27570 mx31 litekit support
27572 This patch adds support for the mx31 litekit board
27574 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
27575 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27577 commit cdace0661208754a53019ea0dc7b803a040e0939
27578 Author: Sascha Hauer <s.hauer@pengutronix.de>
27579 Date: Wed Mar 26 20:40:49 2008 +0100
27581 add an i2c driver for mx31
27583 This patch adds an i2c driver for Freescale i.MX processors
27585 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
27586 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27588 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
27589 Author: Sascha Hauer <s.hauer@pengutronix.de>
27590 Date: Wed Mar 26 20:40:42 2008 +0100
27592 core support for Freescale mx31
27594 This patch adds the core support for Freescale mx31
27596 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
27597 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27599 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
27600 Author: Wolfgang Denk <wd@denx.de>
27601 Date: Sun Apr 13 14:19:23 2008 -0700
27605 ...as suggested by Peter Pearse
27607 Signed-off-by: Wolfgang Denk <wd@denx.de>
27609 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
27610 Author: Sascha Hauer <s.hauer@pengutronix.de>
27611 Date: Wed Mar 26 20:40:36 2008 +0100
27613 Separate omap24xx specific code from arm1136
27615 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
27616 to cpu/arm1136/omap24xx.
27618 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
27619 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27621 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
27622 Author: Mike Frysinger <vapier@gentoo.org>
27623 Date: Tue Jan 29 18:21:05 2008 -0500
27625 disable caches before booting an app for Blackfin apps
27627 It isn't generally save to execute applications outside of U-Boot with caches
27628 enabled due to the way the Blackfin processor handles caches (requires
27629 software assistance). This patch disables caches before booting an ELF or
27630 just booting raw code. The previous discussion on the patch was that we
27631 wanted to use weaks instead, but that proved to not be feasible when multiple
27632 symbols are involved, which puts us back at the ifdef solution. I've
27633 minimized the ugliness by moving the setup step outside of the main function.
27635 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27637 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
27638 Author: Wolfgang Denk <wd@denx.de>
27639 Date: Sun Apr 13 10:03:54 2008 -0700
27641 ppc: Get rid of unused machine type definitions
27643 Signed-off-by: Wolfgang Denk <wd@denx.de>
27645 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
27646 Author: Wolfgang Denk <wd@denx.de>
27647 Date: Sun Apr 13 09:59:26 2008 -0700
27649 Coding Style cleanup; update CHANGELOG
27651 Signed-off-by: Wolfgang Denk <wd@denx.de>
27653 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
27654 Author: Larry Johnson <lrj@acm.org>
27655 Date: Thu Feb 21 13:58:11 2008 -0500
27657 LM73 bug fix for negative temperatures and cleanup
27659 When the LM73 temperature sensor measures a temperature below 0 C, the
27660 current driver does not perform sign extension, so the result returned is
27661 512 C too high. This patch fixes the problem, and does general cleanup
27664 Signed-off-by: Larry Johnson <lrj@acm.org>
27666 commit 96ef831f713289afba19da0c8f905e99da2b23e0
27667 Author: Guennadi Liakhovetski <lg@denx.de>
27668 Date: Thu Apr 3 13:36:02 2008 +0200
27670 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
27672 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
27673 series require different addresses for buffered write commands. Define a
27674 configuration option to support buffered writes on those chips. A more
27675 elegant solution would be to automatically detect those chips by parsing
27676 their CFI records, but that would require introduction of a fixup table
27677 into the cfi_flash driver.
27679 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
27681 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
27682 Author: Lee Nipper <lee.nipper@freescale.com>
27683 Date: Thu Apr 10 09:35:06 2008 -0500
27685 mpc83xx: Update DIMM data bus width test to support 40-bit width
27687 32-bit wide ECC memory modules report 40-bit width.
27688 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
27690 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
27691 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27693 commit 5fb5a689d822ca61e814bd523fc930af335242fa
27694 Author: Dave Liu <r63238@freescale.com>
27695 Date: Mon Mar 31 17:05:12 2008 +0800
27697 mpc83xx: Fix the bug of serdes initialization
27699 Currently the serdes will not be initializated due to the
27702 Signed-off-by: Dave Liu <daveliu@freescale.com>
27703 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27705 commit 2000784818f043db7ca60e2846a72d097766b894
27706 Author: Dave Liu <r63238@freescale.com>
27707 Date: Thu Apr 3 16:28:29 2008 +0800
27709 mpc83xx: Fix the SATA clock setting of 837x targets
27711 Currently the SATA controller clock is configured as CSB clock,
27712 usually the CSB clock is 400/333/266MHz.
27714 However, The SATA IP block is only guaranteed to operate up to
27715 200 MHz as stated in the HW spec.
27717 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
27719 This patch makes the SATA clock as half of CSB clock.
27721 Signed-off-by: Dave Liu <daveliu@freescale.com>
27722 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27724 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
27725 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27726 Date: Wed Apr 2 13:41:21 2008 +0200
27728 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
27730 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27731 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27733 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
27734 Author: Kumar Gala <galak@kernel.crashing.org>
27735 Date: Wed Apr 9 04:20:57 2008 -0500
27737 85xx: Fix detection of MP cpu spin up
27739 We were looking at the wrong memory offset to determine of a secondary
27740 cpu had been spun up or not. Also added a warning message if the
27741 all the secondary cpus we expect don't spin up.
27743 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27745 commit f3e04bdc3f360c66801a9048956e61e41a16edba
27746 Author: Kumar Gala <galak@kernel.crashing.org>
27747 Date: Tue Apr 8 10:45:50 2008 -0500
27749 85xx: Use SVR_SOC_VER instead of SVR_VER
27751 The recent change introduced by 'Update SVR numbers to expand support'
27752 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
27753 to compare against a particular processor id.
27755 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27757 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
27758 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
27759 Date: Fri Apr 11 10:00:35 2008 -0400
27761 ppc4xx: Fix power mgt definitions for PPC440
27763 Corrected DCR addresses of PPC440EP power management registers.
27765 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
27767 commit 950a392464e616b4590bc4501be46e2d7d162dea
27768 Author: Wolfgang Denk <wd@denx.de>
27769 Date: Fri Apr 11 15:11:26 2008 +0200
27771 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
27773 Reverting became necessary after it turned out that the patches in
27774 the u-boot-arm repo were modified, and in some cases corrupted.
27776 This reverts the following commits:
27778 066bebd6353e33af3adefc3404560871699e9961
27779 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
27780 c88ae20580b2b01487b4cdcc8b2a113f551aee36
27781 a147e56f03871bba4f05058d5e04ce7deb010b04
27782 d6674e0e2a6a1f033945f78838566210d3f28c95
27783 8c8463cce44d849e37744749b32d38e1dfb12e50
27784 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
27785 8bf69d81782619187933a605f1a95ee1d069478d
27786 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
27787 a574a73852a527779234e73e17e7597fd8128882
27788 1377b5583a48021d983e1fd565f7d40c89e84d63
27789 1704dc20917b4f71e373e2c888497ee666d40380
27791 Signed-off-by: Wolfgang Denk <wd@denx.de>
27793 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
27794 Author: Stefan Roese <sr@denx.de>
27795 Date: Fri Apr 11 07:02:29 2008 +0200
27797 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
27799 This patch reworks the default environment on Kilauea/Haleakala. Now
27800 "net_nfs" for exmaple uses the device-tree style booting formerly know
27801 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
27802 new image booting support, which check for image overwriting. So the
27803 addresses needed togeet adjusted.
27805 Signed-off-by: Stefan Roese <sr@denx.de>
27807 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
27808 Author: Stefan Roese <sr@denx.de>
27809 Date: Wed Apr 9 11:58:02 2008 +0200
27811 ppc4xx: Fix Canyonlands default environment to work with new image support
27813 Since the new image support checks for image overwriting, the default
27814 environment needs to get adjusted to use correct addresses.
27816 Signed-off-by: Stefan Roese <sr@denx.de>
27818 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
27819 Author: Stefan Roese <sr@denx.de>
27820 Date: Wed Apr 9 11:54:11 2008 +0200
27822 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
27824 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
27825 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
27826 on 4xx systems _start currently cannot be used for this calculation.
27827 So revert back to the original version for now.
27829 Signed-off-by: Stefan Roese <sr@denx.de>
27831 commit f91374f65eae8b42cac329e06ba1c54728278efb
27832 Author: Michal Simek <monstr@monstr.eu>
27833 Date: Fri Mar 28 12:49:52 2008 +0100
27835 microblaze: Sort microblaze boards in MAKEALL script
27837 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
27838 Author: Michal Simek <monstr@monstr.eu>
27839 Date: Fri Mar 28 11:58:45 2008 +0100
27841 microblaze: clean microblaze_config.mk
27843 FLAGS are generated by U-BOOT generator.
27844 Board specific FLAGS are in board directory
27846 Signed-off-by: Michal Simek <monstr@monstr.eu>
27848 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
27849 Author: Michal Simek <monstr@monstr.eu>
27850 Date: Fri Mar 28 12:47:19 2008 +0100
27852 microblaze: xupv2p fix config file for supporting FDT
27854 commit 188dc16b189143573b1ed90e584bf866d75cdd12
27855 Author: Michal Simek <monstr@monstr.eu>
27856 Date: Fri Mar 28 11:53:02 2008 +0100
27858 microblaze: ml401 fix config file for supporting FDT
27860 Signed-off-by: Michal Simek <monstr@monstr.eu>
27862 commit 4c6a6f02e239236261333759997eeaf86b30b54c
27863 Author: Michal Simek <monstr@monstr.eu>
27864 Date: Fri Mar 28 11:22:48 2008 +0100
27866 microblaze: ml401 - add ifdef for GPIO
27868 Signed-off-by: Michal Simek <monstr@monstr.eu>
27870 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
27871 Author: Michal Simek <monstr@monstr.eu>
27872 Date: Fri Mar 28 12:13:03 2008 +0100
27874 microblaze: clean uart16550 and uartlite handling
27876 Signed-off-by: Michal Simek <monstr@monstr.eu>
27878 commit 0b20f250877441460fb79d72192954abe8498834
27879 Author: Michal Simek <monstr@monstr.eu>
27880 Date: Fri Mar 28 11:08:31 2008 +0100
27882 microblaze: Add Emaclite driver to Makefile
27884 Signed-off-by: Michal Simek <monstr@monstr.eu>
27886 commit 868cde5310f88234b774878e4f06e79df10a88b3
27887 Author: Michal Simek <monstr@monstr.eu>
27888 Date: Fri Mar 28 11:08:01 2008 +0100
27890 microblaze: Add Emac driver to Makefile
27892 Signed-off-by: Michal Simek <monstr@monstr.eu>
27894 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
27895 Author: Michal Simek <monstr@monstr.eu>
27896 Date: Fri Mar 28 12:42:29 2008 +0100
27898 microblaze: add Emac ethernet driver
27900 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
27901 Author: Michal Simek <monstr@monstr.eu>
27902 Date: Fri Mar 28 12:41:56 2008 +0100
27904 microblaze: add Emaclite ethernet driver
27906 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
27907 Author: Michal Simek <monstr@monstr.eu>
27908 Date: Fri Mar 28 11:04:01 2008 +0100
27910 microblaze: ML401 and XUPV2P remove emac and emaclite reference
27912 Signed-off-by: Michal Simek <monstr@monstr.eu>
27914 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
27915 Author: Michal Simek <monstr@monstr.eu>
27916 Date: Fri Mar 28 10:59:32 2008 +0100
27918 microblaze: remove old setting for emac driver
27920 Signed-off-by: Michal Simek <monstr@monstr.eu>
27922 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
27923 Author: Michal Simek <monstr@monstr.eu>
27924 Date: Fri Mar 28 10:58:15 2008 +0100
27926 microblaze: Clean Makefile from ancient emac driver
27928 Signed-off-by: Michal Simek <monstr@monstr.eu>
27930 commit ab68f921d9c741830f721c3d879c13a0c5597183
27931 Author: Daniel Hellstrom <daniel@gaisler.com>
27932 Date: Fri Mar 28 10:20:43 2008 +0100
27934 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
27936 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27938 commit 6ed8a43a19bb0275501bc286007daafa923552cf
27939 Author: Daniel Hellstrom <daniel@gaisler.com>
27940 Date: Wed Mar 26 23:38:48 2008 +0100
27942 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
27944 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27946 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
27947 Author: Daniel Hellstrom <daniel@gaisler.com>
27948 Date: Wed Mar 26 23:34:47 2008 +0100
27950 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
27952 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27954 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
27955 Author: Daniel Hellstrom <daniel@gaisler.com>
27956 Date: Fri Mar 28 10:06:52 2008 +0100
27958 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
27960 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27962 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
27963 Author: Daniel Hellstrom <daniel@gaisler.com>
27964 Date: Wed Mar 26 23:26:48 2008 +0100
27966 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
27968 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27970 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
27971 Author: Daniel Hellstrom <daniel@gaisler.com>
27972 Date: Fri Mar 28 10:00:33 2008 +0100
27974 SPARC: Added support for SPARC LEON2 SOC Processor.
27976 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27978 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
27979 Author: Daniel Hellstrom <daniel@gaisler.com>
27980 Date: Wed Mar 26 23:00:38 2008 +0100
27982 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
27984 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27986 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
27987 Author: Daniel Hellstrom <daniel@gaisler.com>
27988 Date: Wed Mar 26 22:51:29 2008 +0100
27990 SPARC: Added support for SPARC LEON3 SOC processor.
27992 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
27994 commit bf3d8b31169546fcddb4737391e1893fb12d033a
27995 Author: Daniel Hellstrom <daniel@gaisler.com>
27996 Date: Fri Mar 28 08:29:26 2008 +0100
27998 SPARC: added SPARC support for new uimage in common code.
28000 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
28002 commit 00ab32c85405a4fe65fd4128243086210fc90a21
28003 Author: Daniel Hellstrom <daniel@gaisler.com>
28004 Date: Wed Mar 26 22:36:03 2008 +0100
28006 SPARC: added SPARC board information to the command bdinfo.
28008 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
28010 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
28011 Author: Daniel Hellstrom <daniel@gaisler.com>
28012 Date: Fri Mar 28 09:47:00 2008 +0100
28014 SPARC: Added generic support for SPARC architecture.
28016 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
28018 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
28019 Author: Stefan Roese <sr@denx.de>
28020 Date: Thu Apr 3 14:50:34 2008 +0200
28022 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
28024 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
28025 has 2 RGMII instances and we need to configure the 2nd RGMII instance
28026 for the EMAC2+3 channels.
28028 Signed-off-by: Stefan Roese <sr@denx.de>
28030 commit c2a545ce33b26d80337f80b533828839249fb1c9
28031 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28032 Date: Wed Apr 2 08:03:56 2008 +0200
28034 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
28036 fdt.c: In function 'ft_cpu_setup':
28037 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
28038 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
28039 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
28040 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
28042 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28044 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
28045 Author: Andy Fleming <afleming@freescale.com>
28046 Date: Mon Mar 31 20:45:56 2008 -0500
28048 Fix fdt set command to conform to dts spec
28050 The fdt set command was treating properties specified as <00> and <0011>
28051 as byte streams, rather than as an array of cells. As we already have
28052 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
28053 we should use the <> syntax to describe arrays of cells, which are always
28054 32-bits per element. If we imagine this likely (IMHO) scenario:
28056 > fdt set /ethernet-phy@1 reg <1>
28058 With the old code, this would create a bad fdt, since the reg cell would be
28059 made to be one byte in length. But the cell must be 4 bytes, so this would
28060 break mysteriously.
28062 Also, the dts spec calls for constants inside the angle brackets (<>)
28063 to conform to C constant standards as they pertain to base.
28064 Take this scenario:
28066 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
28068 The old fdt command would complain that it couldn't parse that. Or, if you
28069 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
28072 > fdt set /mydev clock <1f78a40>
28074 Whereas the new code will accept decimal numbers.
28076 While I was in there, I extended the fdt command parser to handle property
28077 strings which are split across multiple arguments:
28079 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
28080 > fdt p /ethernet@f00
28082 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
28085 Lastly, the fdt print code was rearranged slightly to print arrays of cells
28086 if the length of the property is a multiple of 4 bytes, and to not print
28089 Signed-off-by: Andy Fleming <afleming@freescale.com>
28091 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
28092 Author: Stefan Roese <sr@denx.de>
28093 Date: Wed Apr 2 08:39:33 2008 +0200
28095 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
28097 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
28098 interface. This usage can be configured with the jumper J6. This patch
28099 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
28102 Signed-off-by: Stefan Roese <sr@denx.de>
28104 commit 6fe2946f198481254a6ee9600d7456b8316a4083
28105 Author: Kim Phillips <kim.phillips@freescale.com>
28106 Date: Fri Mar 28 17:37:49 2008 -0500
28108 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
28110 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
28111 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
28114 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28116 commit b5873f1732b92a25690e1513b90dfb0d644f6697
28117 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28118 Date: Tue Apr 1 07:30:51 2008 +0200
28120 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
28122 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28124 commit 2d934ea51f276522b532f870a820e844ff480b5b
28125 Author: Tor Krill <tor@excito.com>
28126 Date: Fri Mar 28 15:29:45 2008 +0100
28128 Add Vitesse 8601 support to TSEC driver
28130 Add phy_info for Vitesse VSC8601.
28131 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
28133 Signed-off-by: Tor Krill <tor@excito.com>
28134 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
28135 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28137 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
28138 Author: Daniel Hellstrom <daniel@gaisler.com>
28139 Date: Mon Mar 31 14:25:00 2008 +0000
28141 SPARC: added SMC91111 driver in and out macros for LEON processors.
28143 This patch makes SPARC/LEON processors able to read and write
28144 to the SMC91111 chip using the chip external I/O bus of the memory
28145 controller. This patchs defines the standard in and out macros
28146 expected by the SMC9111 driver.
28148 To access that I/O bus one must set up the memory controller
28149 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
28150 up this correctly when the other MCTRL parameters are set up. It
28151 can be set up from the board configuration header file.
28153 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
28154 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28156 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
28157 Author: Stelian Pop <stelian@popies.net>
28158 Date: Wed Mar 26 18:52:34 2008 +0100
28160 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
28162 Signed-off-by: Stelian Pop <stelian@popies.net>
28164 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
28165 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28166 Date: Mon Mar 31 21:31:04 2008 +0200
28168 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
28170 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28172 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
28173 Author: Stelian Pop <stelian@popies.net>
28174 Date: Wed Mar 26 18:52:33 2008 +0100
28176 Add support for AT91SAM9260EK
28178 Support for booting from internal DataFlash, external DataFlash card
28179 or NAND flash is available.
28181 Signed-off-by: Stelian Pop <stelian@popies.net>
28183 commit 1762f13b4aab88b685b1722f17dada247945624b
28184 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28185 Date: Mon Mar 31 21:20:49 2008 +0200
28187 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
28189 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28191 commit 761712188b353494defb2b644491ff73d0daaa6f
28192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28193 Date: Mon Mar 31 21:12:17 2008 +0200
28195 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
28197 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28199 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
28200 Author: Stelian Pop <stelian@popies.net>
28201 Date: Wed Mar 26 20:52:32 2008 +0100
28203 Port AT91CAP9 to the new headers
28205 Adapt the existing AT91CAP9 code to the new headers and APIs.
28207 Signed-off-by: Stelian Pop <stelian@popies.net>
28209 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
28210 Author: Stelian Pop <stelian@popies.net>
28211 Date: Wed Mar 26 19:52:31 2008 +0100
28213 Finish header files reworking
28215 Replace AT91CAP9.h file with several splitted header files coming
28216 from the Linux kernel.
28218 This is part 2 of the replacement: more header imports and edits.
28220 Signed-off-by: Stelian Pop <stelian@popies.net>
28222 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
28223 Author: Stelian Pop <stelian@popies.net>
28224 Date: Wed Mar 26 19:52:30 2008 +0100
28226 Import several header files from Linux
28228 Replace AT91CAP9.h file with several splitted header files coming
28229 from the Linux kernel.
28231 This is part 1 of the replacement: pristine header files import.
28233 Signed-off-by: Stelian Pop <stelian@popies.net>
28235 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
28236 Author: Stelian Pop <stelian@popies.net>
28237 Date: Wed Mar 26 20:52:28 2008 +0100
28239 Move at91cap9 specific files to at91sam9 directory
28241 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
28242 common infrastructure can be used. Let this infrastructure be
28243 named after the AT91SAM9 family, and move the existing AT91CAP9
28244 files to the new place.
28246 Signed-off-by: Stelian Pop <stelian@popies.net>
28248 commit 61106a565870ff503f92b251b94bd7afef889a04
28249 Author: Stelian Pop <stelian@popies.net>
28250 Date: Wed Mar 26 21:52:27 2008 +0100
28252 Use timer_init() instead of board supplied interrupt_init()
28254 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
28255 the board, so use timer_init() instead of interrupt_init().
28257 Signed-off-by: Stelian Pop <stelian@popies.net>
28259 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
28260 Author: Stelian Pop <stelian@popies.net>
28261 Date: Wed Mar 26 21:52:36 2008 +0100
28263 Cleanup DataFlash partition handling
28265 DataFlash partition information has become a mess. This patch
28266 defines a single partition scheme for Atmel DataFlashes. This partition
28267 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
28269 Signed-off-by: Stelian Pop <stelian@popies.net>
28271 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
28272 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28273 Date: Fri Mar 28 08:47:45 2008 -0500
28275 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
28277 When the version_string function in start.S is not 4-byte align,
28278 it will cause the compiler generates "unaligned opcodes detected
28279 in executable segment". This issue affects all ColdFire CPUs.
28280 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
28283 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28284 Acked-by: John Rigby <jrigby@freescale.com>
28286 commit bae61eefe15b4d454060a7140e49ae58322be803
28287 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28288 Date: Tue Mar 25 15:41:15 2008 -0500
28290 ColdFire: Add dspi and serial flash support for MCF5445x
28292 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28293 Acked-by: John Rigby <jrigby@freescale.com>
28295 commit 48ead7a7a922fceaf494e352abfab8216a41b417
28296 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28297 Date: Tue Mar 18 17:37:01 2008 -0500
28299 ColdFire: Remove R5200 board
28301 This board never went into production
28303 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
28304 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28305 Acked-by: John Rigby <jrigby@freescale.com>
28307 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
28308 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
28309 Date: Thu Jan 24 14:02:32 2008 -0600
28311 ColdFire: Added M5275EVB support.
28313 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
28314 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28315 Acked-by: John Rigby <jrigby@freescale.com>
28317 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
28318 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
28319 Date: Mon Feb 4 15:38:20 2008 -0600
28321 ColdFire: Added MCF5275 cpu support.
28323 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
28324 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28325 Acked-by: John Rigby <jrigby@freescale.com>
28327 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
28328 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28329 Date: Mon Mar 17 12:14:11 2008 -0500
28331 ColdFire: Define bootdelay in configuration file for M52277EVB
28333 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
28334 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28335 Acked-by: John Rigby <jrigby@freescale.com>
28337 commit 77878f16cedee17161ff2336990970fffc6cea35
28338 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28339 Date: Mon Mar 17 12:09:07 2008 -0500
28341 ColdFire: Fix second memory Chipselect for M5475EVB
28343 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28344 Acked-by: John Rigby <jrigby@freescale.com>
28346 commit 43d60642395a550956cb21d287c8cfa563913d28
28347 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28348 Date: Thu Mar 13 14:26:32 2008 -0500
28350 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
28352 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28353 Acked-by: John Rigby <jrigby@freescale.com>
28355 commit eb14ebe813a0cb5d47905228da446a5ad692473b
28356 Author: Larry Johnson <lrj@acm.org>
28357 Date: Sun Mar 30 20:33:04 2008 -0500
28359 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
28361 Signed-off-by: Larry Johnson <lrj@acm.org>
28363 commit 02e3892021112f21067d9ed1d04ae4182725ba52
28364 Author: Stefan Roese <sr@denx.de>
28365 Date: Mon Mar 31 12:20:48 2008 +0200
28367 ppc4xx: Small whitespace fix of esd patches
28369 Signed-off-by: Stefan Roese <sr@denx.de>
28371 commit 034394abb524785047c815f00dde8cdbdc1593c5
28372 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28373 Date: Sun Mar 30 18:52:44 2008 +0200
28375 ppc4xx: Cleanup PMC440 board support
28377 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28379 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
28380 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28381 Date: Sun Mar 30 18:52:06 2008 +0200
28383 ppc4xx: Add ptm configuration variables for PMC440
28385 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
28386 environment variables.
28388 Cleanup pci_target_init.
28390 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28392 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
28393 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28394 Date: Sun Mar 30 18:01:15 2008 +0200
28396 ppc4xx: Minor updates for DU440 boards
28398 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28400 commit d5bffeb868d6b4d462f558dac43011027b6644b7
28401 Author: Mike Frysinger <vapier@gentoo.org>
28402 Date: Tue Feb 19 00:54:20 2008 -0500
28404 Blackfin: cleanup and overhaul common board init functions
28406 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
28408 commit b86b3416f874358acaf07519e7620cdb2145f75b
28409 Author: Mike Frysinger <vapier@gentoo.org>
28410 Date: Tue Feb 19 00:50:58 2008 -0500
28412 Blackfin: cleanup lib_blackfin/cache.c
28414 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
28416 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
28417 Author: Mike Frysinger <vapier@gentoo.org>
28418 Date: Sun Mar 30 15:46:13 2008 -0400
28420 Blackfin: unify cpu and boot modes
28422 All of the duplicated code for Blackfin processors and boot modes have been
28423 unified. After all, the core is the same for all processors, just the
28424 peripheral set differs (which gets handled in the drivers).
28426 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
28428 commit 880cc4381ea8360248cddcdf87a64566745a5724
28429 Author: Stelian Pop <stelian@popies.net>
28430 Date: Wed Mar 26 22:52:35 2008 +0100
28432 Fix CFG_NO_FLASH compilation.
28434 Many Atmel boards have no "real" (NOR) flash on board, and rely only
28435 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
28436 be present in a board configuration file, while still enabling flash
28437 commands like 'flinfo', 'protect', etc.
28439 Signed-off-by: Stelian Pop <stelian@popies.net>
28441 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
28442 Author: Mike Frysinger <vapier@gentoo.org>
28443 Date: Tue Feb 19 00:58:13 2008 -0500
28445 Blackfin: BF537-stamp: cleanup spi flash driver
28447 This punts the old spi flash driver for a new/generalized one until the
28448 common one can be integrated.
28450 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
28452 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
28453 Author: Ben Warren <biggerbadderben@gmail.com>
28454 Date: Sun Mar 30 11:34:34 2008 -0400
28456 Fix macro typo in common/cmd_mii.c
28458 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
28459 actually applied the wrong patch.
28461 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28463 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
28464 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28465 Date: Sun Mar 30 16:39:53 2008 +0200
28467 use correct at91rm9200 register name in m501sk board
28469 This fixes a naming bug for at91rm9200 lowlevel init code:
28470 NOR boot flash is on chipselect 0, not chipselect 2. This
28471 makes code use the register name from chip datasheets.
28473 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28475 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
28476 Author: David Brownell <david-b@pacbell.net>
28477 Date: Fri Jan 18 12:55:00 2008 -0800
28479 use correct at91rm9200 register name
28481 This fixes a naming bug for at91rm9200 lowlevel init code:
28482 NOR boot flash is on chipselect 0, not chipselect 2. This
28483 makes code use the register name from chip datasheets.
28485 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
28487 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
28488 Author: David Brownell <david-b@pacbell.net>
28489 Date: Fri Jan 18 12:45:45 2008 -0800
28491 add missing ARM boards to MAKEALL
28493 Add some missing ARM boards to MAKEALL. These build correctly,
28494 unlike several of the boards already listed.
28496 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
28498 commit 066bebd6353e33af3adefc3404560871699e9961
28499 Author: Peter Pearse <peter.pearse@arm.com>
28500 Date: Sun Mar 30 11:34:09 2008 +0100
28502 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
28503 to prevent compilation error.
28505 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
28507 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
28508 Author: Guennadi Liakhovetski <[lg@denx.de]>
28509 Date: Sun Mar 30 11:32:30 2008 +0100
28511 Support for the MX31ADS evaluation board from Freescale
28513 This patch adds support for the MX31ADS evaluation board from Freescale,
28514 initialization code is copied from RedBoot sources, also provided by Freescale.
28516 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28518 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
28519 Author: Sascha Hauer <s.hauer@pengutronix.de>
28520 Date: Sun Mar 30 11:32:27 2008 +0100
28522 Phytec Phycore-i.MX31 support
28524 This patch adds support for the Phytec Phycore-i.MX31 board
28526 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
28527 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28529 commit a147e56f03871bba4f05058d5e04ce7deb010b04
28530 Author: Sascha Hauer <s.hauer@pengutronix.de>
28531 Date: Sun Mar 30 11:32:24 2008 +0100
28533 mx31 litekit support
28535 This patch adds support for the mx31 litekit board
28537 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
28538 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28540 commit d6674e0e2a6a1f033945f78838566210d3f28c95
28541 Author: Sascha Hauer <s.hauer@pengutronix.de>
28542 Date: Sun Mar 30 11:32:21 2008 +0100
28544 add SMSC LAN9x1x Network driver
28546 This patch adds a driver for the following smsc network controllers:
28554 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
28555 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28557 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
28558 Author: Sascha Hauer <s.hauer@pengutronix.de>
28559 Date: Sun Mar 30 11:32:16 2008 +0100
28561 add an i2c driver for mx31
28563 This patch adds an i2c driver for Freescale i.MX processors
28565 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
28566 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28568 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
28569 Author: Sascha Hauer <s.hauer@pengutronix.de>
28570 Date: Sun Mar 30 11:30:43 2008 +0100
28572 core support for Freescale mx31
28574 This patch adds the core support for Freescale mx31
28576 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
28577 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28579 commit 8bf69d81782619187933a605f1a95ee1d069478d
28580 Author: Sascha Hauer <s.hauer@pengutronix.de>
28581 Date: Sun Mar 30 11:28:46 2008 +0100
28583 Separate omap24xx specific code from arm1136
28585 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
28587 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
28588 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28590 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
28591 Author: Peter Pearse <peter.pearse@arm.com>
28592 Date: Sun Mar 30 11:23:05 2008 +0100
28594 Add pmdra into MAKEALL
28596 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
28598 commit a574a73852a527779234e73e17e7597fd8128882
28599 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
28600 Date: Sun Mar 30 11:21:58 2008 +0100
28602 Adds support for the Prodrive PMDRA board, based on a DM6441
28604 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
28606 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
28607 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
28608 Date: Sun Mar 30 11:11:34 2008 +0100
28610 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
28612 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
28614 commit 1704dc20917b4f71e373e2c888497ee666d40380
28615 Author: Dirk Behme <dirk.behme@gmail.com>
28616 Date: Sun Mar 30 11:09:01 2008 +0100
28618 - Remove *_masked() functions as noted by Wolfgang
28619 - Adapt register naming to recent TI spec (sprue26, March 2007)
28620 - Fix reset_timer() handling
28621 - As reported by Pieter [1] the overflow fix introduced a
28622 delay of factor 16 (e.g 2 seconds became 32). While the
28623 overflow fix is basically okay, it missed to divide udelay by
28625 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
28626 - Remove software division of timer count value (DIV(x)
28627 macro) and do it in hardware (TIM_CLK_DIV).
28628 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
28629 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
28630 the hints & testing!
28632 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
28634 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
28636 commit ac3315c26e143c31680750c9c13f027efbcc887e
28637 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
28638 Date: Thu Mar 6 16:45:44 2008 +0100
28640 new PHY @ e1000 - 2nd try
28642 Add 82541ER device with latest integrated IGP2 PHY.
28643 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
28645 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
28646 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28648 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
28649 Author: Daniel Hellstrom <daniel@gaisler.com>
28650 Date: Fri Mar 28 20:22:53 2008 +0100
28652 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
28654 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
28655 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
28656 available at www.gaisler.com.
28658 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
28659 offloading etc.) can be determined by a bit in the control register.
28660 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
28662 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
28663 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28665 commit 233a8bcd94997f3f345833a3b82e836222f2a206
28666 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
28667 Date: Mon Mar 17 17:08:22 2008 -0500
28669 Add CONFIG_MII_INIT in cmd_mii.c
28671 Provide common configuration in do_mii() to execute mii_init()
28672 for all cpu architectures
28674 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28675 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28677 commit f605479de2deb11e834f31dfdb0af107c86aced6
28678 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
28679 Date: Mon Mar 17 17:08:16 2008 -0500
28681 ColdFire: Fix FEC transmit issue for MCF5275
28683 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28684 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28686 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
28687 Author: Aras Vaichas <arasv@magtech.com.au>
28688 Date: Wed Mar 26 09:43:57 2008 +1100
28690 DHCP request fix for Windows Server 2003
28692 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
28693 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
28694 interoperability problems with Windows Server 200x DHCP server when U-Boot
28695 client responds too fast for server to handle.
28697 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
28698 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28700 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
28701 Author: Daniel Hellstrom <daniel@gaisler.com>
28702 Date: Fri Mar 28 20:40:19 2008 +0100
28704 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
28706 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
28707 SPARC CPUs implement flash_read64 which calls __raw_readq.
28709 For current SPARC architectures (LEON2 and LEON3) each read from the
28710 FLASH must lead to a cache miss. This is because FLASH can not be set
28711 non-cacheable since program code resides there, and alternatively disabling
28712 cache is poor from performance view, or doing a cache flush between each
28713 read is even poorer.
28715 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
28716 load alternative space, the alternative space number (ASI) is processor
28717 implementation spcific and can be found by including <asm/processor.h>.
28719 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
28721 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
28722 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
28723 Date: Fri Mar 28 15:41:25 2008 +0100
28725 Make MPC83xx one step closer to full relocation.
28727 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
28728 and use GOT relative reference.
28730 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
28731 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28733 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
28734 Author: Michael Barkowski <michael.barkowski@freescale.com>
28735 Date: Thu Mar 27 14:34:43 2008 -0400
28737 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
28739 This patch fixes eeprom page size so that you can now write more than
28740 64 bytes at a time.
28742 It also makes the board take MAC addresses, if found, from EEPROM.
28744 User should place up to 4 addresses at offset 0x7f00, for
28745 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
28746 four six-byte values should have it's CRC at the end. crc32 and
28747 eeprom commands can be used to accomplish this.
28749 If CRC fails, MAC addresses come from the environment. If CRC
28750 succeeds, the environment is overwritten at startup.
28752 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
28753 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28755 commit 8f325cff31f6e745e6540014b131b9a97f61944c
28756 Author: Michael Barkowski <michael.barkowski@freescale.com>
28757 Date: Fri Mar 28 15:15:38 2008 -0400
28759 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
28761 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
28762 controller on the PCI bus in Linux on the MPC8323ERDB.
28764 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
28767 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
28768 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28770 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
28771 Author: Kim Phillips <kim.phillips@freescale.com>
28772 Date: Fri Mar 28 10:19:07 2008 -0500
28774 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
28776 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
28777 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
28778 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
28779 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
28780 convenience macros.
28782 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28784 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
28785 Author: Kim Phillips <kim.phillips@freescale.com>
28786 Date: Fri Mar 28 10:18:53 2008 -0500
28788 mpc83xx: display ddr frequency in board_add_ram_info banner
28790 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28792 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
28793 Author: Kim Phillips <kim.phillips@freescale.com>
28794 Date: Fri Mar 28 10:18:40 2008 -0500
28796 mpc83xx: unreinvent mem_clk
28798 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
28799 mem_*_clk for consistency's sake.
28801 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28803 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
28804 Author: Kim Phillips <kim.phillips@freescale.com>
28805 Date: Fri Mar 28 14:31:23 2008 -0500
28807 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
28809 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28811 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
28812 Author: Dave Liu <r63238@freescale.com>
28813 Date: Wed Mar 26 22:57:19 2008 +0800
28815 mpc83xx: enable the SATA interface on mpc837xemds board
28817 Enable the first two SATA interfaces on MPC837xEMDS board,
28818 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
28820 Signed-off-by: Dave Liu <daveliu@freescale.com>
28821 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28823 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
28824 Author: Dave Liu <r63238@freescale.com>
28825 Date: Wed Mar 26 22:56:36 2008 +0800
28827 mpc83xx: initialize serdes for MPC837xEMDS boards
28829 This patch is stolen from Anton Vorontsov's patch
28830 for mpc837xerdb boards.
28832 The reference clk and xcorevdd voltage of serdes1/2
28833 is same between mpc837xemds and mpc837xerdb.
28835 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
28836 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
28837 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
28839 Signed-off-by: Dave Liu <daveliu@freescale.com>
28840 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28842 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
28843 Author: Stefan Roese <sr@denx.de>
28844 Date: Fri Mar 28 14:09:04 2008 +0100
28846 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
28848 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
28849 interface. This usage can be configured with the jumper J6. This patch
28850 displays the current configuration upon bootup and changes the PCIe
28851 init loop, to only initialize the availabel PCIe slots.
28853 Signed-off-by: Stefan Roese <sr@denx.de>
28855 commit 90447ecbbac8572457b6d8903073ac3f120995ba
28856 Author: Tor Krill <tor@excito.com>
28857 Date: Fri Mar 28 11:29:10 2008 +0100
28859 MTD/CFI: Add support for 16bit legacy AMD flash
28861 Add entry for 512Kx16 AMD flash to jedec_table.
28862 Read out 16bit device id if chipwidth is 16bit.
28863 Fixed coding style after Stefans feedback
28865 Signed-off-by: Tor Krill <tor@excito.com>
28867 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
28868 Author: Stefan Roese <sr@denx.de>
28869 Date: Fri Mar 28 11:02:53 2008 +0100
28871 ppc: Small change to CFG_MEM_TOP_HIDE description
28873 Signed-off-by: Stefan Roese <sr@denx.de>
28875 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
28876 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28877 Date: Thu Mar 27 15:44:12 2008 +0900
28879 sh: Add support stat structure and stat.h
28881 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28883 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
28884 Author: Mark Jonas <toertel@gmail.com>
28885 Date: Sat Mar 22 19:27:52 2008 +0100
28887 sh: Removed warning when compiling drivers/serial/serial_sh.c.
28889 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
28890 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28892 commit f309fa38929ffba71230c02330ffa42f4bba6333
28893 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28894 Date: Wed Mar 12 18:02:57 2008 +0900
28896 sh: Remove disable_ctrlc function from R7780MP
28898 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28900 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
28901 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28902 Date: Wed Mar 12 17:55:15 2008 +0900
28904 sh: Add maintainer of R7780MP to MAINTAINER file
28906 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
28908 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28910 commit f5e2466f7baa887a7df0c536333eea8231333497
28911 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28912 Date: Tue Mar 25 17:11:24 2008 +0900
28914 sh: Add support Renesas Solutions R2D plus board
28916 R2D plus is SH reference board used with SH7751R.
28917 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
28918 one PCI bus, VGA, and two Ethernet controller.
28920 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28922 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
28923 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28924 Date: Wed Mar 12 12:15:29 2008 +0900
28926 sh: Add support SH4 cache control
28928 Add support SH4 cache control and flash_cache function
28930 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28932 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
28933 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28934 Date: Mon Mar 24 01:53:01 2008 +0900
28936 sh: Add support PCI host driver for SH7751/SH7751R
28938 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28940 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
28941 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28942 Date: Mon Mar 24 02:11:26 2008 +0900
28944 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
28946 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28948 commit 566933278101c144d75361ea682678a326c1290d
28949 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28950 Date: Wed Mar 12 12:10:28 2008 +0900
28952 sh: Add support SuperH SH7751/SH7751R
28954 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28956 commit 3313e0e26224fc9a0c445124f3455058c696df84
28957 Author: Mark Jonas <toertel@gmail.com>
28958 Date: Mon Mar 10 11:37:10 2008 +0100
28960 sh: Added support for SH7720 based board MPR2.
28962 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
28963 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28965 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
28966 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28967 Date: Thu Mar 6 14:05:53 2008 +0900
28969 sh: Fix receive FIFO level register of SH4A
28971 Receive FIFO level register is different in SH4A.
28972 Because register is different, cannot occasionally receive data.
28974 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28976 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
28977 Author: Yusuke Goda <goda.yusuke@renesas.com>
28978 Date: Tue Mar 11 12:55:12 2008 +0900
28980 sh: Add support Renesas Solutions R7780MP
28982 Renesas Solutions R7780MP is a reference board on SH7780.
28983 This board has serial, 10/100 base Ethernet deivice, CF slot
28984 and VGA devices. This board can set extension board.
28985 Extension board has 10/100/1000 base Ethernet device, PCI slot,
28988 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
28989 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28991 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
28992 Author: Yusuke Goda <goda.yusuke@renesas.com>
28993 Date: Wed Mar 5 14:30:02 2008 +0900
28995 sh: Add support PCI of SuperH and SH7780
28997 This patch add support PCI of SuperH base code and SH7780 specific code.
28999 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
29000 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29002 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
29003 Author: Yusuke Goda <goda.yusuke@renesas.com>
29004 Date: Wed Mar 5 14:23:26 2008 +0900
29006 sh: Add support SH7780
29008 SH7780 is CPU of Renesas Technology.
29012 - DDR-SDRAM controller
29015 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
29016 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29018 commit c2042f5952a686c414031309b8f244513bf578f0
29019 Author: goda.yusuke <goda.yusuke@renesas.com>
29020 Date: Fri Jan 25 20:46:36 2008 +0900
29022 sh: Add support Renesas Solutions Migo-R board
29024 Migo-R is a board based on SH7722 and has may devices.
29025 In this patch, supported SCIF, NOR flash and Ethernet.
29027 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
29028 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29030 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
29031 Author: Bartlomiej Sieka <tur@semihalf.com>
29032 Date: Thu Mar 27 15:06:40 2008 +0100
29034 Fix host tool build breakage, take two
29036 Revert commit 87c8431f and fix build breakage so that the build continues
29037 to work on FC systems.
29039 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
29041 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
29042 Author: Stefan Roese <sr@denx.de>
29043 Date: Wed Mar 19 09:36:47 2008 +0100
29045 ppc4xx: Enable ECC on LWMON5
29047 Since all ECC related problems seem to be resolved on LWMON5, this patch
29048 now enables ECC support.
29050 We have to write the ECC bytes by zeroing and flushing in smaller
29051 steps, since the whole 256MByte takes too long for the external
29054 Signed-off-by: Stefan Roese <sr@denx.de>
29056 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
29057 Author: Larry Johnson <lrj@acm.org>
29058 Date: Mon Mar 17 11:10:35 2008 -0500
29060 ppc4xx: Updates to Korat-specific code
29062 This patch contains updates for changes for the Korat PPC440EPx board.
29063 These changes include:
29065 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
29066 described in the new "doc/README.korat" file;
29068 (2) a new memory map for the registers in the board's CPLD;
29070 (3) a revised format for manufacturer's data in serial EEPROM; and
29072 (4) changes to track updates to U-Boot for the Sequoia board.
29074 Signed-off-by: Larry Johnson <lrj@acm.org>
29076 commit f766cdf89b3a2a7634b8c5869f606150e332036c
29077 Author: Markus Brunner <super.firetwister@gmail.com>
29078 Date: Thu Mar 27 10:46:25 2008 +0100
29080 ppc4xx: PPC405EP Set EMAC noise filter bits
29082 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
29083 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
29084 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
29086 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
29087 Signed-off-by: Stefan Roese <sr@denx.de>
29089 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
29090 Author: Mike Nuss <mike@terascala.com>
29091 Date: Wed Feb 20 11:54:20 2008 -0500
29093 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
29095 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
29096 after startup to change the speed of the clocks. This patch adds the
29097 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
29098 initialization code will reconfigure the PLL to run the system with a CPU
29099 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
29102 Signed-off-by: Mike Nuss <mike@terascala.com>
29103 Acked-by: Stefan Roese <sr@denx.de>
29105 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
29106 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29107 Date: Thu Mar 27 09:12:40 2008 +0100
29109 new-image: Fix host tool build breakage
29111 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29113 commit 6fb4b640562a10daff0dbe537638d511b5b48650
29114 Author: Stefan Roese <sr@denx.de>
29115 Date: Thu Mar 27 10:24:03 2008 +0100
29117 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
29119 Signed-off-by: Stefan Roese <sr@denx.de>
29121 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
29122 Author: Stefan Roese <sr@denx.de>
29123 Date: Wed Mar 19 10:23:43 2008 +0100
29125 ppc4xx: Add fdt support to Prodrive alpr
29127 Since this board will probably be ported to arch/powerpc in the
29128 near future, we add device tree support now. This way we are
29129 "ready" for arch/powerpc from now on.
29131 Signed-off-by: Stefan Roese <sr@denx.de>
29133 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
29134 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
29135 Date: Mon Mar 17 09:27:56 2008 +0100
29137 ppc4xx: Enable cache support on the ALPR board
29139 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
29141 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
29142 Author: Stefan Roese <sr@denx.de>
29143 Date: Wed Mar 26 10:14:11 2008 +0100
29145 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
29147 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
29148 memory area will get subtracted from the top (end) of ram and won't get
29149 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
29150 should gets passed the now "corrected" memory size and won't touch it
29151 either. This should work for arch/ppc and arch/powerpc. Only Linux board
29152 ports in arch/powerpc with bootwrapper support, which recalculate the
29153 memory size from the SDRAM controller setup, will have to get fixed
29154 in Linux additionally.
29156 This patch enables this config option on some PPC440EPx boards as a workaround
29157 for the CHIP 11 errata. Here the description from the AMCC documentation:
29159 CHIP_11: End of memory range area restricted access.
29163 The 440EPx DDR controller does not acknowledge any
29164 transaction which is determined to be crossing over the
29165 end-of-memory-range boundary, even if the starting address is
29166 within valid memory space. Any such transaction from any PLB4
29167 master will result in a PLB time-out on PLB4 bus.
29170 In case of such misaligned bursts, PLB4 masters will not
29171 retrieve any data at all, just the available data up to the
29172 end of memory, especially the 440 CPU. For example, if a CPU
29173 instruction required an operand located in memory within the
29174 last 7 words of memory, the DCU master would burst read 8
29175 words to update the data cache and cross over the
29176 end-of-memory-range boundary. Such a DCU read would not be
29177 answered by the DDR controller, resulting in a PLB4 time-out
29178 and ultimately in a Machine Check interrupt. The data would
29179 be inaccessible to the CPU.
29182 Forbid any application to access the last 256 bytes of DDR
29183 memory. For example, make your operating system believe that
29184 the last 256 bytes of DDR memory are absent. AMCC has a patch
29185 that does this, available for Linux.
29187 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
29188 lwmon5, korat, sequoia
29190 The other remaining 440EPx board were intentionally not included
29191 since it is not clear to me, if they use the end of ram for some
29192 other purpose. This is unclear, since these boards have CONFIG_PRAM
29193 defined and even comments like this:
29196 /* esd expects pram at end of physical memory.
29197 * So no logbuffer at the moment.
29200 It is strongly recommended to not use the last 256 bytes on those
29201 boards too. Patches from the board maintainers are welcome.
29203 Signed-off-by: Stefan Roese <sr@denx.de>
29205 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
29206 Author: Stefan Roese <sr@denx.de>
29207 Date: Thu Mar 27 10:09:05 2008 +0100
29209 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
29211 Signed-off-by: Stefan Roese <sr@denx.de>
29213 commit d56a3ce179688cde61073a3690e21703d68fafd7
29214 Author: Stefan Roese <sr@denx.de>
29215 Date: Tue Mar 25 17:51:13 2008 +0100
29217 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
29219 The routine ft_board_setup() configures the EBC NOR mappings for the
29220 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
29221 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
29222 problem, we need to pass the corrected address here too.
29224 Signed-off-by: Stefan Roese <sr@denx.de>
29226 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
29227 Author: Stefan Roese <sr@denx.de>
29228 Date: Wed Mar 19 16:35:12 2008 +0100
29230 ppc4xx: Fix compilation warning in 4xx_enet.c
29232 Signed-off-by: Stefan Roese <sr@denx.de>
29234 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
29235 Author: Stefan Roese <sr@denx.de>
29236 Date: Wed Mar 19 16:20:49 2008 +0100
29238 ppc4xx: Add AMCC Glacier 406GT eval board support
29240 This patch adds support for the AMCC Glacier 460GT eval board.
29241 The main difference to the Canyonlands board are listed here:
29243 - 4 ethernet ports instead of 2
29247 Currently EMAC2+3 are not working. This will be fixed in a later
29250 Signed-off-by: Stefan Roese <sr@denx.de>
29252 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
29253 Author: Stefan Roese <sr@denx.de>
29254 Date: Thu Mar 27 08:47:26 2008 +0100
29256 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
29258 Signed-off-by: Stefan Roese <sr@denx.de>
29260 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
29261 Author: Anatolij Gustschin <agust@denx.de>
29262 Date: Wed Mar 26 21:05:43 2008 +0100
29264 Fix out of tree building issue
29266 Currently U-Boot building in some external directory
29267 doesn't work. This patch tries to fix the problem.
29269 Signed-off-by: Anatolij Gustschin <agust@denx.de>
29271 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
29272 Author: Anatolij Gustschin <agust@denx.de>
29273 Date: Wed Mar 26 18:13:33 2008 +0100
29275 README: update documentation (availability, links, etc.)
29279 Signed-off-by: Anatolij Gustschin <agust@denx.de>
29281 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
29282 Author: Anatolij Gustschin <agust@denx.de>
29283 Date: Wed Mar 26 17:47:44 2008 +0100
29285 Fix compilation error in cmd_usb.c
29287 This patch fixes compilation error
29288 cmd_usb.c: In function 'do_usb':
29289 cmd_usb.c:552: error: void value not ignored as it ought to be
29291 Signed-off-by: Anatolij Gustschin <agust@denx.de>
29293 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
29294 Author: Timur Tabi <timur@freescale.com>
29295 Date: Fri Mar 14 17:45:29 2008 -0500
29297 Add support for setting the I2C bus speed in fsl_i2c.c
29299 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
29300 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
29301 but fsl_i2c.c ignores it and uses conservative value when programming the
29304 Signed-off-by: Timur Tabi <timur@freescale.com>
29305 Acked-by: Andy Fleming <afleming@freescale.com>
29307 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
29308 Author: Wolfgang Denk <wd@denx.de>
29309 Date: Thu Mar 27 00:03:57 2008 +0100
29311 Coding style cleanup, update CHANGELOG
29313 Signed-off-by: Wolfgang Denk <wd@denx.de>
29315 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
29316 Author: Dave Liu <r63238@freescale.com>
29317 Date: Wed Mar 26 22:55:32 2008 +0800
29319 drivers: add the support for Freescale SATA controller
29321 Add the Freescale on-chip SATA controller driver to u-boot,
29322 The SATA controller is used on the 837x and 8315 targets,
29323 The driver can be used to load kernel, fs and dtb.
29326 - 1.5/3 Gbps link speed
29327 - LBA48, LBA28 support
29328 - DMA and FPDMA support
29329 - Two ports support
29331 Signed-off-by: Dave Liu <daveliu@freescale.com>
29333 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
29334 Author: Dave Liu <r63238@freescale.com>
29335 Date: Wed Mar 26 22:54:44 2008 +0800
29337 ata: add the readme for SATA command line
29339 Signed-off-by: Dave Liu <daveliu@freescale.com>
29341 commit cd54081cd479e542fc399b8a40651ff11a1ad849
29342 Author: Dave Liu <r63238@freescale.com>
29343 Date: Wed Mar 26 22:53:24 2008 +0800
29345 ata: enable the sata initialize on boot up
29347 Signed-off-by: Dave Liu <daveliu@freescale.com>
29349 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
29350 Author: Dave Liu <r63238@freescale.com>
29351 Date: Wed Mar 26 22:52:36 2008 +0800
29353 ata: add the fis struct for SATA
29355 Signed-off-by: Dave Liu <daveliu@freescale.com>
29357 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
29358 Author: Dave Liu <r63238@freescale.com>
29359 Date: Wed Mar 26 22:51:44 2008 +0800
29361 ata: add the libata support
29363 add simple libata support in u-boot
29365 Signed-off-by: Dave Liu <daveliu@freescale.com>
29367 commit 8e9bb43429e50df55fa41932cbe65841ff579220
29368 Author: Dave Liu <r63238@freescale.com>
29369 Date: Wed Mar 26 22:50:45 2008 +0800
29371 ata: make the ata_piix driver using new SATA framework
29373 original ata_piix driver is using IDE framework, not real
29374 SATA framework. For now, the ata_piix driver is only used
29375 by x86 sc520_cdp board. This patch makes the ata_piix driver
29376 use the new SATA framework, so
29378 - remove the duplicated command stuff
29379 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
29380 - add the CONFIG_CMD_SATA define to sc520_cdp.h
29382 Signed-off-by: Dave Liu <daveliu@freescale.com>
29384 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
29385 Author: Dave Liu <r63238@freescale.com>
29386 Date: Wed Mar 26 22:49:44 2008 +0800
29388 ata: add the support for SATA framework
29390 - add the SATA framework
29391 - add the SATA command line
29393 Signed-off-by: Dave Liu <daveliu@freescale.com>
29395 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
29396 Author: Dave Liu <r63238@freescale.com>
29397 Date: Wed Mar 26 22:48:18 2008 +0800
29399 ata: merge the header of ata_piix driver
29401 move the sata.h from include/ to drivers/block/ata_piix.h
29403 Signed-off-by: Dave Liu <daveliu@freescale.com>
29405 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
29406 Author: Dave Liu <r63238@freescale.com>
29407 Date: Wed Mar 26 22:47:06 2008 +0800
29409 ata: merge the ata_piix driver
29411 move the cmd_sata.c from common/ to drivers/ata_piix.c,
29412 the cmd_sata.c have some part of ata_piix controller drivers.
29413 consolidate the driver to have better framework.
29415 Signed-off-by: Dave Liu <daveliu@freescale.com>
29417 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
29418 Author: Markus Klotzbuecher <mk@denx.de>
29419 Date: Wed Mar 26 18:26:43 2008 +0100
29421 USB, Storage: fix a bug introduced in commit
29422 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
29423 to only print only information on one storage device, but not for
29426 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29428 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
29429 Author: Anatolij Gustschin <agust@denx.de>
29430 Date: Wed Mar 26 17:47:44 2008 +0100
29432 Fix compilation error in cmd_usb.c
29434 This patch fixes compilation error
29435 cmd_usb.c: In function 'do_usb':
29436 cmd_usb.c:552: error: void value not ignored as it ought to be
29438 Signed-off-by: Anatolij Gustschin <agust@denx.de>
29439 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29441 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
29442 Author: Kumar Gala <galak@kernel.crashing.org>
29443 Date: Wed Mar 26 08:53:53 2008 -0500
29445 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
29447 Provide a board_lmb_reserve helper function to ensure we reserve
29448 the page of memory we are using for the boot page translation code.
29450 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29452 commit 79679d80021ab095e639e250ca472fe526da02e2
29453 Author: Kumar Gala <galak@kernel.crashing.org>
29454 Date: Wed Mar 26 08:34:25 2008 -0500
29456 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
29458 The following changes are needed to be inline with ePAPR v0.81:
29460 * r4, r5 and now always set to 0 on boot release
29461 * r7 is used to pass the size of the initial map area (IMA)
29462 * EPAPR_MAGIC value changed for book-e processors
29463 * changes in the spin table layout
29464 * spin table supports a 64-bit physical release address
29466 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29468 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
29469 Author: Jon Loeliger <jdl@freescale.com>
29470 Date: Wed Mar 19 15:02:07 2008 -0500
29472 FSL: Clean up board/freescale/common/Makefile
29474 Each file that can be built here now follows some
29475 CONFIG_ option so that they are appropriately built
29476 or not, as needed. And CONFIG_ defines were added
29477 to various board config files to make sure that happens.
29479 The other board/freescale/*/Makefiles no longer need
29480 to reach up and over into ../common to build their
29481 individually needed files any more.
29483 Boards that are CDS specific were renamed with cds_ prefix.
29485 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29487 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
29488 Author: Kumar Gala <galak@kernel.crashing.org>
29489 Date: Wed Feb 27 22:00:27 2008 -0600
29491 85xx: Fix merge duplication
29493 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
29495 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29497 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
29498 Author: James Yang <James.Yang@freescale.com>
29499 Date: Tue Feb 12 16:35:07 2008 -0600
29501 85xx: Expand CCSR space with more DDR controller registers.
29503 Signed-off-by: James Yang <James.Yang@freescale.com>
29504 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29505 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29507 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
29508 Author: James Yang <James.Yang@freescale.com>
29509 Date: Fri Feb 8 18:05:08 2008 -0600
29511 85xx: Speed up get_ddr_freq() and get_bus_freq()
29513 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
29514 called. However, get_sys_info() recalculates extraneous information when
29515 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
29516 values from global_data instead.
29518 Signed-off-by: James Yang <James.Yang@freescale.com>
29519 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29521 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
29522 Author: James Yang <James.Yang@freescale.com>
29523 Date: Fri Feb 8 16:46:27 2008 -0600
29525 85xx: Show DDR memory data rate in addition to the memory clock frequency.
29527 Show the DDR memory data rate in addition to the memory clock
29528 frequency. For DDR/DDR2 memories the memory data rate is 2x the
29531 Signed-off-by: James Yang <James.Yang@freescale.com>
29532 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29534 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
29535 Author: James Yang <James.Yang@freescale.com>
29536 Date: Fri Feb 8 16:44:53 2008 -0600
29538 85xx: get_tbclk() speed up and rounding fix
29540 Speed up get_tbclk() by referencing pre-computed bus clock
29541 frequency value from global data instead of sys_info_t. Fix
29542 rounding of result to nearest; previously it was rounding
29545 Signed-off-by: James Yang <James.Yang@freescale.com>
29546 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29548 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
29549 Author: Andy Fleming <afleming@freescale.com>
29550 Date: Wed Feb 6 01:19:40 2008 -0600
29552 Update SVR numbers to expand support
29554 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
29555 is used to distinguish certain variants within an SOC family. To
29556 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
29557 constants to reflect the larger value. We also add SVR numbers for all
29558 of the current variants. Finally, to make things neater, rather than
29559 use an enormous switch statement to print out the CPU type, we create
29560 and array of SVR/name pairs (using a macro), and print out the CPU name
29561 that matches the SVR SOC version.
29563 Signed-off-by: Andy Fleming <afleming@freescale.com>
29565 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
29566 Author: Andy Fleming <afleming@freescale.com>
29567 Date: Wed Feb 6 01:12:57 2008 -0600
29569 Add the Freescale PCI device IDs
29571 Signed-off-by: Andy Fleming <afleming@freescale.com>
29573 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
29574 Author: Kumar Gala <galak@kernel.crashing.org>
29575 Date: Thu Feb 14 11:04:23 2008 -0600
29577 85xx: Added support for multicore boot mechanism
29579 Added the cpu command that provides a generic mechanism to get status,
29580 reset, and release secondary cores in multicore processors.
29582 Added support for using the ePAPR defined spin-table mechanism on 85xx.
29584 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29585 Signed-off-by: Andy Fleming <afleming@freescale.com>
29587 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
29588 Author: Kumar Gala <galak@kernel.crashing.org>
29589 Date: Thu Jan 17 16:48:33 2008 -0600
29591 85xx: Added support for multicore boot mechanism
29593 Added the cpu command that provides a generic mechanism to get status,
29594 reset, and release secondary cores in multicore processors.
29596 Added support for using the ePAPR defined spin-table mechanism on 85xx.
29598 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29600 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
29601 Author: Kumar Gala <galak@kernel.crashing.org>
29602 Date: Wed Jan 30 14:55:14 2008 -0600
29604 85xx: Add the concept of CFG_CCSRBAR_PHYS
29606 When we go to 36-bit physical addresses we need to keep the concept of
29607 the physical CCSRBAR address seperate from the virtual one.
29609 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
29611 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29613 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
29614 Author: Wolfgang Denk <wd@denx.de>
29615 Date: Wed Mar 26 15:38:47 2008 +0100
29617 Coding style cleanup.
29619 Signed-off-by: Wolfgang Denk <wd@denx.de>
29621 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
29622 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
29623 Date: Wed Mar 26 13:02:13 2008 +0100
29625 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
29627 The default settings for RTC DS1337 keeps the OSC
29628 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
29631 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
29633 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
29634 Author: Wolfgang Denk <wd@denx.de>
29635 Date: Wed Mar 26 11:48:46 2008 +0100
29637 Cleanup coding style, update CHANGELOG
29639 Signed-off-by: Wolfgang Denk <wd@denx.de>
29641 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
29642 Author: Wolfgang Denk <wd@denx.de>
29643 Date: Wed Mar 26 10:40:12 2008 +0100
29645 README: update documentation (availability, links, etc.)
29647 Signed-off-by: Wolfgang Denk <wd@denx.de>
29649 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
29650 Author: Aras Vaichas <arasv@magtech.com.au>
29651 Date: Tue Mar 25 12:09:07 2008 +1100
29653 USB Storage, add meaningful return value
29655 This patch changes the "usb storage" command to return success if it
29656 finds a USB storage device, otherwise it returns error.
29658 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29660 commit 18e69a35efbb078403db0c0063986470dad7d082
29661 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29662 Date: Fri Mar 14 23:20:18 2008 +0300
29664 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
29666 Linux understands "host" (default), "peripheral" and "otg" (broken).
29667 Though, U-Boot doesn't restrict dr_mode variable to these values (think
29668 of renames in future).
29670 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29671 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29673 commit c7604783b236e368f225efb7b3efb418fe20b404
29674 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29675 Date: Fri Mar 14 23:20:30 2008 +0300
29677 tsec: fix link detection for the RTL8211B PHY
29679 RTL8211B sets link state register after autonegotiation complete,
29680 so with bootdelay=0 RTL8211B will report lack of the link.
29682 To fix this, we should wait for aneg to complete, even if the
29683 link is currently down.
29685 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29686 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29688 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
29689 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29690 Date: Mon Mar 24 20:47:09 2008 +0300
29692 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
29694 device_type = "soc" is being deprecated, newer device trees will use
29695 "fsl,soc" and/or "fsl,immr" for the soc nodes.
29697 This patch also adds clock-frequency property for soc nodes (the same
29698 value as bus-frequency).
29700 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29702 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
29703 Author: Joe D'Abbraccio <ljd015@freescale.com>
29704 Date: Mon Mar 24 13:00:59 2008 -0400
29706 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
29708 With the original value of 1/2 clock cycle delay, the system ran relatively
29709 stable except when we run benchmarks that are intensive users of memory.
29710 When I run samba connected disk with a HDBENCH test, the system locks-up
29711 or reboots sporadically.
29713 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
29715 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
29716 Author: Scott Wood <scottwood@freescale.com>
29717 Date: Mon Mar 24 12:44:13 2008 -0500
29719 mpc83xx: Set PCI I/O bus-address base to zero.
29721 The device trees for these boards describe PCI I/O as starting from
29722 address zero from the device's perspective.
29724 Placing I/O elsewhere may cause problems with certain PCI boards, and may
29725 cause problems with Linux.
29727 Signed-off-by: Scott Wood <scottwood@freescale.com>
29729 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
29730 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29731 Date: Mon Mar 24 20:47:05 2008 +0300
29733 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
29735 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
29736 This patch fixes "system time drifting" problem.
29738 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29740 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
29741 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29742 Date: Mon Mar 24 20:47:02 2008 +0300
29744 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
29746 This is needed to update /choosen/linux,stdout-path properly.
29748 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29750 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
29751 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29752 Date: Mon Mar 24 20:47:00 2008 +0300
29754 mpc83xx: MPC8360E-RDK: add dhcp command
29756 Plus modify environment to use it and remove bootfile env variable,
29757 it is internal and CONFIG_BOOTFILE is used for these purposes.
29759 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29761 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
29762 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29763 Date: Mon Mar 24 20:46:57 2008 +0300
29765 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
29767 Current DDR setup easily causes memory corruption, this patch fixes it.
29769 Also fix TIMING_CFG0_MRS_CYC definition.
29771 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29773 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
29774 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29775 Date: Mon Mar 24 20:46:53 2008 +0300
29777 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
29779 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
29780 controller and FHCI (QE USB).
29782 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29784 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
29785 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29786 Date: Mon Mar 24 20:46:51 2008 +0300
29788 mpc83xx: MPC8360E-RDK: add support for NAND
29790 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29792 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
29793 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29794 Date: Mon Mar 24 20:46:46 2008 +0300
29796 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
29798 This is needed for BCM PHYs to work on this board.
29800 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29802 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
29803 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29804 Date: Mon Mar 24 20:46:34 2008 +0300
29806 uec: add support for Broadcom BCM5481 Gigabit PHY
29808 This patch adds basic support for Broadcom BCM5481 PHY.
29810 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
29811 Peter Barada <peterb@logicpd.com>.
29813 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29815 commit 6a600c3a1876bc203445df4f0fd6b12648259666
29816 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29817 Date: Mon Mar 24 20:46:28 2008 +0300
29819 uec: add support for RGMII_RXID interface mode
29821 PHY drivers will use it to setup software delay between RXD and RXC
29824 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29826 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
29827 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29828 Date: Mon Mar 24 20:46:24 2008 +0300
29830 uec: add support for gbit mii status readings
29832 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29834 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
29835 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29836 Date: Mon Mar 24 17:40:47 2008 +0300
29838 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
29840 This is primarily for the early console support.
29842 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29844 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
29845 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29846 Date: Mon Mar 24 17:40:43 2008 +0300
29848 83xx: initialize serdes for MPC837XRDB boards
29850 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
29851 On the MPC8378ERDB: 2 PCI-E
29852 On the MPC8379ERDB: 4 SATA
29854 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29856 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
29857 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29858 Date: Mon Mar 24 17:40:32 2008 +0300
29860 83xx: serdes setup routines
29862 This patch adds few routines to configure serdes on 837x targets.
29864 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29866 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
29867 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29868 Date: Mon Mar 24 17:40:27 2008 +0300
29870 83xx: split COBJS onto separate lines
29872 ..plus get rid of some #ifdefs in the .c files.
29874 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29876 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
29877 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29878 Date: Mon Mar 24 17:40:23 2008 +0300
29880 83xx: nand support for MPC837XRDB boards
29882 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29884 commit 82e45a204190593e8613145a928f998fb8c909c4
29885 Author: Jerry Van Baren <gvb.uboot@gmail.com>
29886 Date: Tue Mar 18 21:44:41 2008 -0400
29888 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
29890 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
29891 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29893 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
29894 Author: Michael Barkowski <michael.barkowski@freescale.com>
29895 Date: Thu Mar 20 13:15:39 2008 -0400
29897 mpc8323erdb: remove RTC and add EEPROM
29899 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
29901 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
29902 Acked-by: Kim Phillips <kim.phillips@freescale.com>
29904 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
29905 Author: Michael Barkowski <michael.barkowski@freescale.com>
29906 Date: Thu Mar 20 13:15:34 2008 -0400
29908 mpc8323erdb: Improve the system performance
29910 The following changes are based on kernel UCC ethernet performance:
29912 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
29913 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
29914 switch to enable this setting.
29916 The following changes are based on the App Note AN3369 and
29917 verified to improve memory latency using LMbench:
29919 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
29920 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
29922 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
29923 Twr=15ns, and this was already the setting in DDR_MODE)
29924 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
29926 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
29928 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
29930 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
29932 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
29934 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
29937 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
29938 Acked-by: Kim Phillips <kim.phillips@freescale.com>
29940 commit fc549c871f43933396a5b3e21d897023d4b31b8d
29941 Author: Michael Barkowski <michael.barkowski@freescale.com>
29942 Date: Thu Mar 20 13:15:28 2008 -0400
29944 mpc8323erdb: use readable DDR config macros
29946 Use available shift/mask macros to define DDR configuration.
29948 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
29949 Acked-by: Kim Phillips <kim.phillips@freescale.com>
29951 commit 89c7784ed90ba50301eec521144f95111e472906
29952 Author: Timur Tabi <timur@freescale.com>
29953 Date: Fri Feb 8 13:15:55 2008 -0600
29955 83xx: Add Vitesse VSC7385 firmware uploading
29957 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
29958 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
29959 Cleaned up the board header files to make selecting the VSC7385 easier to
29962 Signed-off-by: Timur Tabi <timur@freescale.com>
29963 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29965 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
29966 Author: Timur Tabi <timur@freescale.com>
29967 Date: Fri Feb 8 13:15:54 2008 -0600
29969 NET: Add Vitesse VSC7385 firmware uploading
29971 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
29972 and other boards. A small firwmare must be uploaded to its on-board memory
29973 before it can be enabled. This patch adds the code which uploads firmware
29974 (but not the firmware itself).
29976 Previously, this feature was provided by a U-Boot application that was
29977 made available only on Freescale BSPs. The VSC7385 firmware must still
29978 be obtained separately, but at least there is no longer a need for a separate
29981 Signed-off-by: Timur Tabi <timur@freescale.com>
29982 Acked-by: Ben Warren <biggerbadderben@gmail.com>
29984 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
29985 Author: Wolfgang Denk <wd@denx.de>
29986 Date: Wed Mar 26 00:52:10 2008 +0100
29988 Coding Style cleanyp; update CHANGELOG
29990 Signed-off-by: Wolfgang Denk <wd@denx.de>
29992 commit 43ddd9c820fec44816188f53346b464e20b3142d
29993 Author: Jerry Van Baren <gvb.uboot@gmail.com>
29994 Date: Sat Mar 22 14:23:49 2008 -0400
29996 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
29998 These defines embedded the u-boot env variables and/or the bd_t structure
29999 in the fdt blob. The conclusion of discussion on the u-boot email list
30000 was that embedding these in the fdt blob is not useful: there are better
30001 ways of passing the data (in fact, the fdt blob itself replaces the
30004 The only board that enables these is the stxxtc and they don't appear
30005 to be used by linux.
30007 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30008 Acked-by: Kim Phillips <kim.phillips@freescale.com>
30010 commit 22ed2285743359fd1fe73e411dff914b2256e68f
30011 Author: Stefan Roese <sr@denx.de>
30012 Date: Mon Mar 17 10:49:25 2008 +0100
30014 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
30016 Signed-off-by: Stefan Roese <sr@denx.de>
30018 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
30019 Author: Kyungmin Park <kmpark@infradead.org>
30020 Date: Mon Mar 17 08:54:06 2008 +0900
30022 Add Flex-OneNAND booting support
30024 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
30025 using a NOR Flash interface. This on-chip integration enables system designers
30026 to reduce external system logic and use high-density NAND Flash
30027 in applications that would otherwise have to use more NOR components.
30029 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
30030 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
30031 that require low reliability and high density, SLC area of Flex-OneNAND
30032 to store data that need high reliability and high performance. Flex-OneNAND
30033 can let users take advantage of storing these two different types of data
30034 into one chip, which is making Flex-OneNAND more cost- and space-effective.
30036 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30038 commit c512389cc4a10253249271ff6c887c6dab1f0db2
30039 Author: André Schwarz <andre.schwarz@matrix-vision.de>
30040 Date: Thu Mar 13 13:50:52 2008 +0100
30042 MPC5200: support setup without FEC
30044 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
30045 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
30047 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
30048 Acked-by: Grant Likely <grant.likely@secretlab.ca>
30050 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
30051 Author: Jon Loeliger <jdl@freescale.com>
30052 Date: Wed Mar 5 18:05:46 2008 -0600
30054 FSL: Move board/mpc8266ads under board/freescale
30056 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30058 commit 7f1d846e5c5754449c286587d099d85246062772
30059 Author: Jon Loeliger <jdl@freescale.com>
30060 Date: Wed Mar 5 18:05:47 2008 -0600
30062 FSL: Move board/mpc7448hpc2 under board/freescale
30064 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30066 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
30067 Author: Jon Loeliger <jdl@freescale.com>
30068 Date: Wed Mar 5 18:05:45 2008 -0600
30070 FSL: Move board/mpc8260ads under board/freescale
30072 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30074 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
30075 Author: goda.yusuke <goda.yusuke@renesas.com>
30076 Date: Wed Mar 5 17:08:33 2008 +0900
30078 net: Add support AX88796L ethernet device
30080 AX88796L is device of NE2000 compatible.
30081 This patch support AX88796L ethernet device.
30083 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
30084 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30086 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
30087 Author: Wolfgang Denk <wd@denx.de>
30088 Date: Tue Mar 25 22:50:41 2008 +0100
30090 ne2000 driver: change #ifdef to Makefile conditional compilation
30092 Signed-off-by: Wolfgang Denk <wd@denx.de>
30094 commit e710185aae90c64d39c2d453e40e58ceefe4f250
30095 Author: goda.yusuke <goda.yusuke@renesas.com>
30096 Date: Wed Mar 5 17:08:20 2008 +0900
30098 net: Divided code of NE2000 ethernet driver
30100 There are more devices of the NE2000 base.
30101 A present code is difficult for us to support more devices.
30102 To support more NE2000 clone devices, separated the function.
30104 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
30105 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30107 commit 395bce4f59a507a60a475f7ee46bed47de9482df
30108 Author: Mike Frysinger <vapier@gentoo.org>
30109 Date: Sun Feb 24 23:58:13 2008 -0500
30111 net/Blackfin: move on-chip MAC driver into drivers/net/
30113 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
30114 directory, but it is not board specific, so relocate it to the drivers dir
30115 so that other Blackfin ports can utilize it.
30117 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30119 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
30120 Author: Mike Frysinger <vapier@gentoo.org>
30121 Date: Sun Feb 24 23:52:35 2008 -0500
30123 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
30125 Since the "ssync" instruction may have hardware anomalies associated with
30126 it, have the smc91111 driver use the SSYNC macro rather than invoking it
30127 directly. We workaround all the anomalies via this macro.
30129 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30131 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
30132 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
30133 Date: Sun Feb 17 22:57:47 2008 +0000
30135 8xx: Update OF support on 8xx
30137 This patch does some shifting around of OF support on 8xx.
30139 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
30141 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
30142 Author: Kumar Gala <galak@kernel.crashing.org>
30143 Date: Fri Feb 15 15:16:18 2008 -0600
30145 ppc: Allow boards to specify how much memory they can map
30147 For historical reasons we limited the stack to 256M because some boards
30148 could only map that much via BATS. However newer boards are capable of
30149 mapping more memory (for example 85xx is capble of doing up to 2G).
30151 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30153 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
30154 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
30155 Date: Fri Feb 15 01:05:58 2008 +0000
30157 8xx : Add OF support to Adder875 board port - resubmit
30159 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
30161 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
30162 Author: Kumar Gala <galak@kernel.crashing.org>
30163 Date: Thu Feb 14 20:44:42 2008 -0600
30165 Add setexpr command
30167 Add a simple expr style command that will set an env variable as the result
30168 of the command. This allows us to do simple math in shell. The following
30169 operations are supported: &, |, ^, +, -, *, /.
30171 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30173 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
30174 Author: Jon Loeliger <jdl@freescale.com>
30175 Date: Wed Mar 5 17:27:48 2008 -0600
30177 FSL: Move board/mpc7448hpc2 under board/freescale
30179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30181 commit 449c703374a8868453425e15da7e2f76221b72e4
30182 Author: Jon Loeliger <jdl@freescale.com>
30183 Date: Wed Mar 5 17:21:43 2008 -0600
30185 FSL: Move board/mpc8266ads under board/freescale
30187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30189 commit 5863577989ad689427bb750107e9a75f1c1645d2
30190 Author: Jon Loeliger <jdl@freescale.com>
30191 Date: Wed Mar 5 16:41:41 2008 -0600
30193 FSL: Move board/mpc8260ads under board/freescale
30195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30197 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
30198 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30199 Date: Tue Mar 25 21:30:08 2008 +0900
30201 [MIPS] Move gth2_config from ARM section to MIPS
30203 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30205 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
30206 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30207 Date: Tue Mar 25 21:30:07 2008 +0900
30209 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
30211 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30213 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
30214 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30215 Date: Tue Mar 25 21:30:07 2008 +0900
30217 [MIPS] Fix dcache_status()
30219 You can't judge UNCACHED by Config.K0 LSB.
30221 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30223 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
30224 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30225 Date: Tue Mar 25 21:30:07 2008 +0900
30227 [MIPS] Introduce _machine_restart
30229 Handles machine specific functions by using weak functions.
30231 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30233 commit decaba6f5cf386d569ac3997bebb871b966c6b18
30234 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30235 Date: Tue Mar 25 21:30:07 2008 +0900
30237 [MIPS] Cleanup CP0 Status initialization
30239 Add setup_c0_status from Linux. For the moment we disable interrupts, set
30240 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
30241 reset-time configuration and will work well across most processors.
30243 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30245 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
30246 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30247 Date: Tue Mar 25 21:30:07 2008 +0900
30249 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
30251 Without this change, we'll be suffering from deffered WATCH exception
30252 once Status.EXL is cleared. Make sure Cause.WP is cleared.
30254 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30256 commit 26138623230ca2bad3c78e05a65527ea70c8b688
30257 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30258 Date: Tue Mar 25 21:30:07 2008 +0900
30260 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
30262 Move things to appropriate place.
30264 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30266 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
30267 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30268 Date: Tue Mar 25 21:30:06 2008 +0900
30270 [MIPS] Implement flush_cache()
30272 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
30273 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
30274 function is used not only in U-Boot specfic programs but also at loading
30277 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30279 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
30280 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30281 Date: Tue Mar 25 21:30:06 2008 +0900
30283 [MIPS] Fix I-/D-cache initialization loops
30285 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
30286 again per a loop for I-cache initialization. But according to 'See MIPS
30287 Run', we're encouraged to use three separate loops rather than combining
30288 them *for both I- and D-cache*. This patch tries to fix this.
30290 In accordance with fixing above, mips_init_[id]cache are separated from
30291 mips_cache_reset(), and rewrite cache loops are completely rewritten with
30294 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30296 commit 1898840797c7f50799377bd5b285a8a93a82c419
30297 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30298 Date: Tue Mar 25 21:30:06 2008 +0900
30300 [MIPS] Replace memory clearance code with f_fill64
30302 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
30304 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30306 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
30307 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30308 Date: Tue Mar 25 21:30:06 2008 +0900
30310 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
30312 This patch replaces the current function definitions with NESTED, LEAF
30313 and END macro. They specify some more additional information about the
30314 function; an alignment of symbol, type of symbol, stack frame usage, etc.
30315 These information explicitly tells the assembler and the debugger about
30316 the types of code we want to generate.
30318 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30320 commit 282223a607c611425fa33f5428f8eae6636972bb
30321 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30322 Date: Tue Mar 25 11:43:17 2008 +0900
30324 [MIPS] asm headers' updates
30326 Make some asm headers adjusted to the latest Linux kernel.
30328 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30330 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
30331 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30332 Date: Tue Mar 25 11:39:29 2008 +0900
30334 [MIPS] Request for the 'mips_cache_lock()' removal
30336 The initial intension of having mips_cache_lock() was to use the cache
30337 as memory for temporary stack use so that a C environment can be set up
30338 as early as possible.
30340 But now mips_cache_lock() follow lowlevel_init(). We've already have the
30341 real memory initilaized at this point, therefore we could/should use it.
30342 No reason to lock at all.
30346 Cache locking is not consistent across MIPS implementaions. Some imple-
30347 mentations don't support locking at all. The style of locking varies -
30348 some support per line locking, others per way, etc. Some parts use bits
30349 in status registers instead of cache ops. Current mips_cache_lock() is
30350 not necessarily general-purpose.
30352 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
30353 they are never get unlocked, so the code relies on whatever gets loaded
30354 after U-Boot to re-initialize the cache and clear the locks. We're sup-
30355 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
30356 but leave the situation as it is for a long time.
30358 For these reasons, I proposed the removal of mips_cache_lock() from the
30359 global start-up code.
30361 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
30362 *things have changed*. If he wants the same behavior as before, he needs
30363 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
30365 If we don't have any regression report through several releases, then
30366 we'll remove codes entirely.
30368 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30369 Acked-by: Andrew Dyer <amdyer@gmail.com>
30371 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
30372 Author: Yuri Tikhonov <yur@emcraft.com>
30373 Date: Mon Mar 24 11:30:54 2008 +0100
30375 lwmon5 SYSMON POST: fix backlight control
30377 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
30378 run on the board, then the SYSMON POST controls the display backlight
30379 (doesn't switch backlight ON if POST FAILED, and does switch the
30380 backlight ON if PASSED).
30382 If not, then the video driver controls the display backlight (just
30383 switch ON the backlight upon initialization).
30385 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30387 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
30388 Author: Yuri Tikhonov <yur@emcraft.com>
30389 Date: Mon Mar 24 11:29:14 2008 +0100
30391 lwmon5 SYSMON POST: fix handling of negative temperatures
30393 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
30395 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30397 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
30398 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30399 Date: Fri Mar 7 16:04:25 2008 +0900
30401 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
30403 In current source code, when the device number of PCI is 0, process PCI
30404 bridge without fail. However, when the device number is 0, it is not PCI
30405 always bridge. There are times when device of PCI allocates.
30407 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
30410 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30411 Acked-by: Stefan Roese <sr@denx.de>
30413 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
30414 Author: Yuri Tikhonov <yur@emcraft.com>
30415 Date: Fri Mar 21 09:18:40 2008 +0100
30417 LWMON5: fix dsPIC POST
30419 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
30421 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
30423 commit 388b82fddc7c05596f3f615f190da0448227dc82
30424 Author: Bartlomiej Sieka <tur@semihalf.com>
30425 Date: Thu Mar 20 23:23:13 2008 +0100
30427 [new uImage] Enable new uImage support for the pcs440ep board.
30429 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30431 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
30432 Author: Bartlomiej Sieka <tur@semihalf.com>
30433 Date: Thu Mar 20 23:23:13 2008 +0100
30435 [new uImage] Do not compile new uImage format support by default
30437 Disable default building of new uImage format support in preparation
30438 for merge with the master. Support for new format can be enabled on
30439 a per-board basis, by defining the following in the board's config file:
30441 #define CONFIG_FIT 1
30442 #define CONFIG_OF_LIBFDT 1
30444 This can be optionally defined to give more verbose output:
30446 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
30448 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30450 commit dafaede8a46c7159310239e036c93e31c6374487
30451 Author: Bartlomiej Sieka <tur@semihalf.com>
30452 Date: Thu Mar 20 23:20:31 2008 +0100
30454 [new uImage] Disable debuging output in preparation for merge with master
30456 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30458 commit fbe7a155027beacebaee9b32e1ada781fe924bca
30459 Author: Bartlomiej Sieka <tur@semihalf.com>
30460 Date: Thu Mar 20 19:38:45 2008 +0100
30462 [new uImage] Compilation and new uImage handling fixes for imxtract
30464 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
30465 include/config_cmd_default.h. Fix few warnings and handling of new format
30468 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30470 commit 36cc8cbb3379d5166f882641123521735c469f92
30471 Author: Bartlomiej Sieka <tur@semihalf.com>
30472 Date: Thu Mar 20 23:10:19 2008 +0100
30474 [new uImage] Fix autoscr command used with new uImage format
30476 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30478 commit 43142e817f0597be412e7cbe19413f5532eafa5d
30479 Author: Bartlomiej Sieka <tur@semihalf.com>
30480 Date: Thu Mar 20 23:10:19 2008 +0100
30482 [new uImage] Fix *.its files location in documentation
30484 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30486 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
30487 Author: Wolfgang Denk <wd@denx.de>
30488 Date: Thu Mar 20 22:01:38 2008 +0100
30490 lwmon5 POST: remove unreachable code
30492 plus some coding style cleanup
30494 Signed-off-by: Wolfgang Denk <wd@denx.de>
30496 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
30497 Author: Yuri Tikhonov <yur@emcraft.com>
30498 Date: Thu Mar 20 17:56:04 2008 +0300
30500 LWMON5: POST RTC fix
30502 Modify the RTC API to provide one a status for the time reported by
30503 the rtc_get() function:
30504 0 - a reliable time is guaranteed,
30505 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
30508 The RTC chip drivers are responsible for providing this info if the
30509 corresponding chip supports such functionality. If not - always
30510 report that the time is reliable.
30512 The POST RTC test was modified to detect the RTC faults utilizing
30513 this new rtc_get() feature.
30515 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30517 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
30518 Author: Martin Krause <martin.krause@tqs.de>
30519 Date: Wed Mar 19 14:25:14 2008 +0100
30521 TQM5200B: update MTD partition layout
30523 - insert partition for dtb blob to TQM5200B MTD layout
30524 - set env variables dependent on the configured board
30525 (TQM5200 or TQM5200B)
30527 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30529 commit f0105727d132f56a21fa3ed8b162309cca6cac44
30530 Author: Stefan Roese <sr@denx.de>
30531 Date: Wed Mar 19 07:09:26 2008 +0100
30533 CFI: Small cleanup for FLASH_SHOW_PROGRESS
30535 With this patch we don't need that many #ifdef's in the code. It moves
30536 the subtraction into the macro and defines a NOP-macro when
30537 CONFIG_FLASH_SHOW_PROGRESS is not defined.
30539 Signed-off-by: Stefan Roese <sr@denx.de>
30540 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
30542 commit 9a042e9ca512beaaa2cb450274313fc477141241
30543 Author: Jerry Van Baren <gvb.uboot@gmail.com>
30544 Date: Sat Mar 8 13:48:01 2008 -0500
30546 Flash programming progress countdown.
30548 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30550 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
30551 Author: Bartlomiej Sieka <tur@semihalf.com>
30552 Date: Wed Mar 19 10:00:06 2008 +0100
30554 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
30556 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30558 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
30559 Author: David Gibson <david@gibson.dropbear.id.au>
30560 Date: Mon Feb 18 18:09:04 2008 +1100
30562 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
30564 Since fdt_node_offset_by_compatible() was converted to the new
30565 fdt_next_node() iterator, a chunk of initialization code became
30566 redundant, but was not removed by oversight. This patch cleans it up.
30568 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30570 commit d0ccb9b140b472039732de102fc14597eedb14df
30571 Author: David Gibson <david@gibson.dropbear.id.au>
30572 Date: Mon Feb 18 18:06:31 2008 +1100
30574 libfdt: Trivial cleanup for CHECK_HEADER)
30576 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
30577 However, there are a handful of functions (fdt_move, rw_check_header,
30578 fdt_open_into) from other files which could also use it (currently
30579 they open-code something more-or-less identical). Therefore, this
30580 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
30583 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30585 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
30586 Author: Kumar Gala <galak@kernel.crashing.org>
30587 Date: Wed Feb 20 14:32:36 2008 -0600
30589 Fix fdt boardsetup command parsing
30591 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
30593 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30595 commit 804887e6001e2f00bea11431bf34d6d472512cda
30596 Author: Kumar Gala <galak@kernel.crashing.org>
30597 Date: Fri Feb 15 03:34:36 2008 -0600
30599 Add sub-commands to fdt
30601 fdt header - Display header info
30602 fdt bootcpu <id> - Set boot cpuid
30603 fdt memory <addr> <size> - Add/Update memory node
30604 fdt rsvmem print - Show current mem reserves
30605 fdt rsvmem add <addr> <size> - Add a mem reserve
30606 fdt rsvmem delete <index> - Delete a mem reserves
30608 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30610 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
30611 Author: David Gibson <david@gibson.dropbear.id.au>
30612 Date: Thu Feb 14 16:50:34 2008 +1100
30614 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
30616 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
30617 node which has NOP tags interspersed with its properties. In this
30618 case fdt_add_subnode_namelen() will put the new subnode before the
30619 first NOP tag, even if there are properties after it, which will
30620 result in an invalid blob.
30622 This patch fixes the bug, and adds a testcase for it.
30624 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30626 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
30627 Author: David Gibson <david@gibson.dropbear.id.au>
30628 Date: Tue Feb 12 11:58:31 2008 +1100
30630 libfdt: Add and use a node iteration helper function.
30632 This patch adds an fdt_next_node() function which can be used to
30633 iterate through nodes of the tree while keeping track of depth. This
30634 function is used to simplify the iteration code in a lot of other
30635 functions, and is also exported for use by library users.
30637 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30639 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
30640 Author: David Gibson <david@gibson.dropbear.id.au>
30641 Date: Fri Jan 11 14:55:05 2008 +1100
30643 libfdt: Add fdt_set_name() function
30645 This patch adds an fdt_set_name() function to libfdt, mirroring
30646 fdt_get_name(). This is a r/w function which alters the name of a
30647 given device tree node.
30649 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30651 commit 23e20aa6488e6c0622496549861bfdc74108debe
30652 Author: Yuri Tikhonov <yur@pollux.denx.de>
30653 Date: Tue Mar 18 13:33:30 2008 +0100
30655 lwmon5: Fix register test logic to match the specific GDC h/w.
30657 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30658 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30660 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
30661 Author: Yuri Tikhonov <yur@pollux.denx.de>
30662 Date: Tue Mar 18 13:27:57 2008 +0100
30664 Fix backlight in the lwmon5 POST.
30666 Backlight was switched on even when temperature was too low.
30668 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30669 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30671 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
30672 Author: Yuri Tikhonov <yur@pollux.denx.de>
30673 Date: Wed Feb 6 18:48:36 2008 +0100
30675 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
30677 To enable this, alternative, configuration the U-Boot board configuration
30678 file for lwmon5 includes the definitions of alternative addresses for header
30679 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
30681 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
30682 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
30683 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
30685 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30687 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
30688 Author: Yuri Tikhonov <yur@pollux.denx.de>
30689 Date: Mon Feb 4 17:11:53 2008 +0100
30691 Add support for the lwmon5 board reset via GPIO58.
30693 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30694 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30696 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
30697 Author: Yuri Tikhonov <yur@pollux.denx.de>
30698 Date: Mon Feb 4 17:09:55 2008 +0100
30700 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
30702 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30703 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30705 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
30706 Author: Yuri Tikhonov <yur@pollux.denx.de>
30707 Date: Mon Feb 4 14:11:03 2008 +0100
30709 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
30711 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30712 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30714 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
30715 Author: Yuri Tikhonov <yur@pollux.denx.de>
30716 Date: Mon Feb 4 14:10:42 2008 +0100
30718 The patch adds new POST tests for the Lwmon5 board. These are:
30720 * External Watchdog test;
30726 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30727 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30729 commit c2ed33efbfff5767bca236828e021c55fd547b6c
30730 Author: Yuri Tikhonov <yur@pollux.denx.de>
30731 Date: Mon Feb 4 14:10:01 2008 +0100
30733 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
30735 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30737 commit 3a5d1e7f1309998791702b2a559e3126781746b9
30738 Author: Yuri Tikhonov <yur@pollux.denx.de>
30739 Date: Tue Mar 18 13:33:30 2008 +0100
30741 lwmon5: Fix register test logic to match the specific GDC h/w.
30743 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30744 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30746 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
30747 Author: Yuri Tikhonov <yur@pollux.denx.de>
30748 Date: Tue Mar 18 13:27:57 2008 +0100
30750 Fix backlight in the lwmon5 POST.
30752 Backlight was switcehd on even when temperature was too low.
30754 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30755 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30757 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
30758 Author: Yuri Tikhonov <yur@pollux.denx.de>
30759 Date: Wed Feb 6 18:48:36 2008 +0100
30761 The patch introduces the alternative configuration of the log buffer for
30762 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
30763 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
30764 PPC440EPX_GPT0_COMP5).
30766 To enable this, alternative, configuration the U-Boot board configuration
30767 file for lwmon5 includes the definitions of alternative addresses for header
30768 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
30770 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
30771 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
30772 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
30774 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30776 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
30777 Author: Yuri Tikhonov <yur@pollux.denx.de>
30778 Date: Mon Feb 4 17:11:53 2008 +0100
30780 Add support for the lwmon5 board reset via GPIO58.
30782 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30783 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30785 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
30786 Author: Yuri Tikhonov <yur@pollux.denx.de>
30787 Date: Mon Feb 4 17:09:55 2008 +0100
30789 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
30790 Disable external watch-dog for now.
30792 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30793 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30795 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
30796 Author: Yuri Tikhonov <yur@pollux.denx.de>
30797 Date: Mon Feb 4 14:11:03 2008 +0100
30799 The patch introduces the CRITICAL feature of POST tests. If the test
30800 marked as POST_CRITICAL fails then the alternative, post_critical,
30801 boot-command is used. If this command is not defined then U-Boot
30802 enters into interactive mode.
30804 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30805 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30807 commit 65b20dcefc89618193fa51947968dada91e4c778
30808 Author: Yuri Tikhonov <yur@pollux.denx.de>
30809 Date: Mon Feb 4 14:10:42 2008 +0100
30811 The patch adds new POST tests for the Lwmon5 board.
30814 * External Watchdog test;
30820 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30821 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30823 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
30824 Author: Yuri Tikhonov <yur@pollux.denx.de>
30825 Date: Mon Feb 4 14:10:01 2008 +0100
30827 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
30829 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
30831 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
30832 Author: Wolfgang Denk <wd@denx.de>
30833 Date: Tue Mar 18 17:35:51 2008 +0100
30835 HMI1001: fix compile problem.
30837 Signed-off-by: Wolfgang Denk <wd@denx.de>
30839 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
30840 Author: Mike Frysinger <vapier@gentoo.org>
30841 Date: Mon Feb 18 05:32:30 2008 -0500
30843 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
30845 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
30846 for the board specific driver at all. Just use the common CFI driver.
30848 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30850 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
30851 Author: Mike Frysinger <vapier@gentoo.org>
30852 Date: Tue Feb 19 00:36:14 2008 -0500
30854 Blackfin: add proper ELF markings to some assembly functions
30856 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30858 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
30859 Author: Mike Frysinger <vapier@gentoo.org>
30860 Date: Tue Feb 19 00:35:17 2008 -0500
30862 Blackfin: new cplbinfo command for viewing cplb tables
30864 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30866 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
30867 Author: Mike Frysinger <vapier@gentoo.org>
30868 Date: Mon Feb 18 05:37:51 2008 -0500
30870 Blackfin: update MAINTAINERS list
30872 Add maintainer information for the Blackfin boards.
30874 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30876 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
30877 Author: Mike Frysinger <vapier@gentoo.org>
30878 Date: Mon Feb 18 05:26:48 2008 -0500
30880 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
30882 Stop tying things to the processor that should be tied to other defines and
30883 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
30884 system to select the -mcpu option.
30886 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30888 commit 86a20fb920bd198105acf7b1191117f566d637ed
30889 Author: Mike Frysinger <vapier@gentoo.org>
30890 Date: Sat Feb 16 07:40:36 2008 -0500
30892 Blackfin: move bootldr command to common code
30894 This moves the Blackfin-common bootldr command out of the BF537-STAMP
30895 specific board directory and into the common directory so that all Blackfin
30896 boards may utilize it.
30898 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30900 commit decbe029b2a9d3333d02c433389b1c821eea96d7
30901 Author: Heiko Schocher <hs@denx.de>
30902 Date: Fri Mar 14 11:05:20 2008 +0100
30904 mgcoge: update configuration
30906 Fix configuration for mgcoge board
30908 Signed-off-by: Heiko Schocher <hs@denx.de>
30910 commit c136724cda0219c49f1d4b346f00da29b14fdf14
30911 Author: Wolfgang Denk <wd@denx.de>
30912 Date: Sun Mar 16 01:22:59 2008 +0100
30914 drivers/rtc/Makefile: keep list sorted
30916 Signed-off-by: Wolfgang Denk <wd@denx.de>
30918 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
30919 Author: Tor Krill <tor@excito.com>
30920 Date: Sat Mar 15 15:40:26 2008 +0100
30922 Add support for Intersil isl1208 RTC
30924 Signed-off-by: Tor Krill <tor@excito.com>
30926 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
30927 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30928 Date: Sat Mar 15 17:36:41 2008 +0100
30932 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30934 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
30935 Author: Wolfgang Denk <wd@denx.de>
30936 Date: Sun Mar 16 01:12:58 2008 +0100
30938 Conding style cleanup
30940 Signed-off-by: Wolfgang Denk <wd@denx.de>
30942 commit 41712b4e8c95dff23354bcd620e1f9477160c190
30943 Author: Stefan Roese <sr@denx.de>
30944 Date: Wed Mar 5 12:31:53 2008 +0100
30946 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
30948 This patch adds USB OHCI support to the Canyonlands board port. It also
30949 enables EXT2 support.
30951 Signed-off-by: Stefan Roese <sr@denx.de>
30953 commit 2596f5b9d353ff3e4387a3325d05740f16958038
30954 Author: Stefan Roese <sr@denx.de>
30955 Date: Wed Mar 5 12:29:32 2008 +0100
30957 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
30959 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
30960 way a board just needs to define this new option to enable the "force
30961 NoPowerSwitching mode" instead of adding new CPU/architecture defines
30962 to the USB source itself.
30964 This new option will be used first with the new AMCC 460EX Canyonlands
30965 board port, which will be posted in a few days.
30967 This patch also fixes a small compilation problem when DEBUG is enabled.
30969 Signed-off-by: Stefan Roese <sr@denx.de>
30971 commit 71665ebf88408ff2acb762af47989fd4365b321a
30972 Author: Stefan Roese <sr@denx.de>
30973 Date: Mon Mar 3 17:27:02 2008 +0100
30975 ppc4xx: Add Canyonlands NAND booting support
30977 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
30978 NAND devices. The only bootstrap option for NAND booting is option F for
30979 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
30980 EEPROM needs to be programmed accordingly.
30982 This patch adds basic NAND booting support for the AMCC Canyonlands aval
30983 board and also adds support to the "bootstrap" command, to enable NAND
30984 booting I2C setting.
30986 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
30988 Signed-off-by: Stefan Roese <sr@denx.de>
30990 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
30991 Author: Stefan Roese <sr@denx.de>
30992 Date: Tue Mar 11 16:53:00 2008 +0100
30994 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
30996 This patch adds support for the AMCC Canyonlands 460EX evaluation
30999 Signed-off-by: Stefan Roese <sr@denx.de>
31001 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
31002 Author: Stefan Roese <sr@denx.de>
31003 Date: Tue Mar 11 16:52:24 2008 +0100
31005 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
31007 This patch adds support for the AMCC Canyonlands 460EX evaluation
31010 Signed-off-by: Stefan Roese <sr@denx.de>
31012 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
31013 Author: Stefan Roese <sr@denx.de>
31014 Date: Tue Mar 11 16:51:17 2008 +0100
31016 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
31018 This patch adds support for the AMCC Canyonlands 460EX evaluation
31021 Signed-off-by: Stefan Roese <sr@denx.de>
31023 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
31024 Author: Stefan Roese <sr@denx.de>
31025 Date: Tue Mar 11 15:11:43 2008 +0100
31027 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
31029 This patch adds basic support for the AMCC 460EX/460GT PPC's.
31031 Signed-off-by: Stefan Roese <sr@denx.de>
31033 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
31034 Author: Stefan Roese <sr@denx.de>
31035 Date: Tue Mar 11 15:11:18 2008 +0100
31037 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
31039 This patch adds basic support for the AMCC 460EX/460GT PPC's.
31041 Signed-off-by: Stefan Roese <sr@denx.de>
31043 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
31044 Author: Stefan Roese <sr@denx.de>
31045 Date: Tue Mar 11 15:07:10 2008 +0100
31047 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
31049 This patch adds basic support for the AMCC 460EX/460GT PPC's.
31051 Signed-off-by: Stefan Roese <sr@denx.de>
31053 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
31054 Author: Stefan Roese <sr@denx.de>
31055 Date: Tue Mar 11 15:05:50 2008 +0100
31057 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
31059 This patch adds basic support for the AMCC 460EX/460GT PPC's.
31061 Signed-off-by: Stefan Roese <sr@denx.de>
31063 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
31064 Author: Stefan Roese <sr@denx.de>
31065 Date: Tue Mar 11 15:05:26 2008 +0100
31067 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
31069 This patch adds basic support for the AMCC 460EX/460GT PPC's.
31071 Signed-off-by: Stefan Roese <sr@denx.de>
31073 commit 56e410178375d9f20be25fb24e180974f0ae120b
31074 Author: Stefan Roese <sr@denx.de>
31075 Date: Tue Feb 19 22:07:57 2008 +0100
31077 ppc4xx: interrupt.c reworked
31079 This patch is a rework of the 4xx interrupt handling done while
31080 adding the 460EX/GT support. Interrupts are needed on 4xx for the
31083 Signed-off-by: Stefan Roese <sr@denx.de>
31085 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
31086 Author: Stefan Roese <sr@denx.de>
31087 Date: Tue Feb 19 22:01:57 2008 +0100
31089 ppc4xx: program_tlb now uses 64bit physical addess
31091 This patch changes the physical addess parameter from 32bit to 64bit.
31092 This is needed for 36bit 4xx platforms to access areas located
31093 beyond the 4GB border, like SoC peripherals (EBC etc.).
31095 Signed-off-by: Stefan Roese <sr@denx.de>
31097 commit c3307fa186af85771924c434997089b8104c0a46
31098 Author: Stefan Roese <sr@denx.de>
31099 Date: Tue Feb 19 21:58:25 2008 +0100
31101 ppc4xx: miiphy.c reworked
31103 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
31104 badly neede some cleanup.
31106 Signed-off-by: Stefan Roese <sr@denx.de>
31108 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
31109 Author: Stefan Roese <sr@denx.de>
31110 Date: Tue Feb 19 16:21:49 2008 +0100
31112 rtc: Add M41T62 support
31114 This patch add support for the STM M41T62 RTC. It is used and tested
31115 on the AMCC Canyonlands 406EX platform.
31117 Signed-off-by: Stefan Roese <sr@denx.de>
31119 commit 217d383e201adc7f2271145ae345ea5eae2b7170
31120 Author: Niklaus Giger <niklaus.giger@netstal.com>
31121 Date: Mon Feb 25 18:46:43 2008 +0100
31123 ppc4xx: Add 405GPr based MCU25 board specific files
31125 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
31127 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
31128 Author: Niklaus Giger <niklaus.giger@netstal.com>
31129 Date: Mon Feb 25 18:46:42 2008 +0100
31131 ppc4xx: Add 405GPr based MCU25 board config file
31133 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
31135 commit b05f35436b733a240559e77e46bed8439665ecc5
31136 Author: Niklaus Giger <niklaus.giger@netstal.com>
31137 Date: Mon Feb 25 18:46:41 2008 +0100
31139 ppc4xx: Add 405GPr based MCU25 board. Global files
31141 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
31143 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
31144 Author: Niklaus Giger <niklaus.giger@netstal.com>
31145 Date: Mon Feb 25 18:37:02 2008 +0100
31147 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
31149 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
31151 commit a079494853cc2bfeddb26673219db0b4b2b31566
31152 Author: Niklaus Giger <niklaus.giger@netstal.com>
31153 Date: Mon Feb 25 18:37:01 2008 +0100
31155 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
31157 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
31158 the FLASH_CFI_LEGACY et al. config options.
31160 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
31162 commit e4170e5a50c8110f792bc37472833ae669d69951
31163 Author: Stefan Roese <sr@denx.de>
31164 Date: Tue Mar 11 13:52:25 2008 +0100
31166 ppc4xx: Fix comment in 405EX DDR2 init code
31168 Signed-off-by: Stefan Roese <sr@denx.de>
31170 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
31171 Author: Bartlomiej Sieka <tur@semihalf.com>
31172 Date: Fri Mar 14 16:22:34 2008 +0100
31174 Add MD5 support to the new uImage format
31176 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31178 commit 0ede0c383530a418cf98be9122371a86573cd0db
31179 Author: Bartlomiej Sieka <tur@semihalf.com>
31180 Date: Fri Mar 14 16:22:34 2008 +0100
31182 Add the MD5 algorithm
31184 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
31185 calculated using the md5() function -- see include/md5.h for details.
31187 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31189 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
31190 Author: Wolfgang Denk <wd@denx.de>
31191 Date: Fri Mar 14 16:04:54 2008 +0100
31193 tools/setlocalversion: use a git-describe-ish format
31195 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
31196 where 'nnnnn' is the number of commits since the last tag (i.e.,
31197 1.3.2-rc3). This makes it much easier to recognize "newer" versions
31198 and to see how much has been changed since the referenced tag.
31200 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
31202 Signed-off-by: Wolfgang Denk <wd@denx.de>
31204 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
31205 Author: Wolfgang Denk <wd@denx.de>
31206 Date: Thu Mar 13 14:32:03 2008 +0100
31208 HMI1001: add support for MPC5200 Rev. B processors.
31210 Signed-off-by: Wolfgang Denk <wd@denx.de>
31212 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
31213 Author: Wolfgang Denk <wd@denx.de>
31214 Date: Thu Mar 13 14:29:49 2008 +0100
31216 TQM5200: remove dead code
31218 This board never used a MGT5100 processor.
31220 Signed-off-by: Wolfgang Denk <wd@denx.de>
31222 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
31223 Author: Marian Balakowicz <m8@semihalf.com>
31224 Date: Wed Mar 12 12:14:15 2008 +0100
31226 [new uImage] Fix build issue on ARM
31228 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
31230 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31232 commit 3310c549a73a949430bfda90876df7552a1dab0c
31233 Author: Marian Balakowicz <m8@semihalf.com>
31234 Date: Wed Mar 12 12:13:13 2008 +0100
31236 [new uImage] Add new uImage format documentation and examples
31238 Create doc/uImage.FIT documentation directory with the following files:
31239 - command_syntax_extensions.txt : extended command syntax description
31240 - howto.txt : short usage howto
31241 - source_file_format.txt : internal new uImage format description
31243 Add example image source files:
31248 Update README appropriately.
31250 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31251 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31253 commit 1ec73761d2e247078f4520a265d463e8b73391a2
31254 Author: Marian Balakowicz <m8@semihalf.com>
31255 Date: Wed Mar 12 10:35:52 2008 +0100
31257 [new uImage] Fix definition of common bootm_headers_t fields
31259 verify, autostart and lmb fields are used regardless of CONFIG_FIT
31260 setting, move their definitions to common section.
31262 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31264 commit 1d1cb4270edc6a99276834064069717f9782c491
31265 Author: Marian Balakowicz <m8@semihalf.com>
31266 Date: Wed Mar 12 10:35:51 2008 +0100
31268 [new uImage] Fix build problems on trab board
31270 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31272 commit f773bea8e11f4a11c388dcee956b2444203e6b65
31273 Author: Marian Balakowicz <m8@semihalf.com>
31274 Date: Wed Mar 12 10:35:46 2008 +0100
31276 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
31278 Save FIT configuration provied in the first bootm argument and use it
31279 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
31280 arguments are not specified.
31282 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31284 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
31285 Author: Marian Balakowicz <m8@semihalf.com>
31286 Date: Wed Mar 12 10:33:01 2008 +0100
31288 [new uImage] More verbose kernel image uncompress error message
31290 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31292 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
31293 Author: Marian Balakowicz <m8@semihalf.com>
31294 Date: Wed Mar 12 10:33:01 2008 +0100
31296 [new uImage] Use show_boot_progress() for new uImage format
31298 This patch allocates a set of show_boot_progress() IDs for new uImage format
31299 and adds show_boot_progress() calls in new uImage format handling code.
31301 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31303 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
31304 Author: Marian Balakowicz <m8@semihalf.com>
31305 Date: Wed Mar 12 10:33:01 2008 +0100
31307 [new uImage] Add new uImage fromat support to fpga command
31309 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31311 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
31312 Author: Marian Balakowicz <m8@semihalf.com>
31313 Date: Wed Mar 12 10:33:01 2008 +0100
31315 [new uImage] Add new uImage format handling to other bootm related commands
31319 docboot - cmd_doc.c
31320 fdcboot - cmd_fdc.c
31321 diskboot - cmd_ide.c
31323 scsiboot - cmd_scsi.c
31324 usbboot - cmd_usb.c
31326 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31328 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
31329 Author: Marian Balakowicz <m8@semihalf.com>
31330 Date: Wed Mar 12 10:33:00 2008 +0100
31332 [new uImage] Add new uImage format support to imgextract command
31334 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31336 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
31337 Author: Marian Balakowicz <m8@semihalf.com>
31338 Date: Wed Mar 12 10:33:00 2008 +0100
31340 [new uImage] Add new uImage format support to autoscript routine
31342 autoscript() routine is updated to accept second argument, which
31343 is only used for FIT images and provides a FIT subimage unit name.
31345 autoscript() routine callers must now pass two arguments. For
31346 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
31347 variable 'autoscript_uname' is introduced and used as a FIT
31348 subimage unit name source.
31350 autoscript command accepts extended syntax of the addr argument:
31351 addr:<subimg_uname>
31353 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31355 commit cd7c596e9f561dbbc17b717277438aee78cde14f
31356 Author: Marian Balakowicz <m8@semihalf.com>
31357 Date: Wed Mar 12 10:33:00 2008 +0100
31359 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
31361 This patch updates architecture specific implementations of
31362 do_bootm_linux() adding new uImage format handling for
31363 operations like get kernel entry point address, get kernel
31364 image data start address.
31366 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31368 commit 3dfe110149311425919e6d6a14b561b4207498f1
31369 Author: Marian Balakowicz <m8@semihalf.com>
31370 Date: Wed Mar 12 10:32:59 2008 +0100
31372 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
31374 This patch adds new node offset fields to struct bootm_headers
31375 and updates bootm_headers processing code to make use of them.
31376 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
31378 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31380 commit bc8ed486b125452ba3bd8344f052f437329150c5
31381 Author: Marian Balakowicz <m8@semihalf.com>
31382 Date: Wed Mar 12 10:32:53 2008 +0100
31384 [new uImage] ppc: Add new uImage format support to FDT handling routines
31386 Support for new (FIT) format uImages is added to powerpc specific
31387 boot_get_fdt() routine which now recognizes, sanity checks FIT image
31388 and is able to access data sections of the requested component image.
31390 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31392 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
31393 Author: Marian Balakowicz <m8@semihalf.com>
31394 Date: Wed Mar 12 10:14:57 2008 +0100
31396 [new uImage] Re-enable interrupts for non automatic booting
31398 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
31399 environment variable is not set to 'yes'.
31401 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31403 commit d985c8498c4e47095820da97aa722381d39172c5
31404 Author: Marian Balakowicz <m8@semihalf.com>
31405 Date: Wed Mar 12 10:14:38 2008 +0100
31407 [new uImage] Remove unnecessary arguments passed to ramdisk routines
31409 boot_get_ramdisk() and image_get_ramdisk() do not need all
31410 cmdtp, flag, argc and argv arguments. Simplify routines definition.
31412 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31414 commit c87796483bc7c2900470dc747c367f602577608d
31415 Author: Marian Balakowicz <m8@semihalf.com>
31416 Date: Wed Mar 12 10:12:37 2008 +0100
31418 [new uImage] Add new uImage format support for ramdisk handling
31420 This patch updates boot_get_ramdisk() routine adding format
31421 verification and handling for new (FIT) uImages.
31423 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31425 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
31426 Author: Marian Balakowicz <m8@semihalf.com>
31427 Date: Wed Mar 12 10:01:05 2008 +0100
31429 [new uImage] Add new uImage format support for kernel booting
31431 New format uImages are recognized by the bootm command,
31432 validity of specified kernel component image is checked and
31433 its data section located and used for further processing
31434 (uncompress, load, etc.)
31436 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31438 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
31439 Author: Marian Balakowicz <m8@semihalf.com>
31440 Date: Tue Mar 11 12:35:20 2008 +0100
31442 [new uImage] Add new uImage format support for imls and iminfo commands
31444 imls and iminfo can now recognize nad print out contents of the new (FIT)
31447 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31449 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
31450 Author: Bartlomiej Sieka <tur@semihalf.com>
31451 Date: Tue Mar 11 12:34:47 2008 +0100
31453 [new uImage] Add support for new uImage format to mkimage tool
31455 Support for the new uImage format (FIT) is added to mkimage tool.
31456 Commandline syntax is appropriately extended:
31458 mkimage [-D dtc_options] -f fit-image.its fit-image
31460 mkimage (together with dtc) takes fit-image.its and referenced therein
31461 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
31462 final image that can be transferred to the target (e.g., via tftp) and then
31463 booted using the bootm command in U-Boot.
31465 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31467 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
31468 Author: Marian Balakowicz <m8@semihalf.com>
31469 Date: Mon Mar 10 17:53:49 2008 +0100
31471 [new uImage] Make node unit names const in struct bootm_headers
31473 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31475 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
31476 Author: Marian Balakowicz <m8@semihalf.com>
31477 Date: Fri Feb 29 21:24:06 2008 +0100
31479 [new uImage] New uImage low-level API
31481 Add FDT-based functions for handling new format component images,
31482 configurations, node operations, property get/set, etc.
31484 fit_ - routines handling global new format uImage operations
31485 like get/set top level property, process all nodes, etc.
31486 fit_image_ - routines handling component images subnodes
31487 fit_conf_ - routines handling configurations node
31489 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31490 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31492 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
31493 Author: Wolfgang Denk <wd@denx.de>
31494 Date: Sun Mar 9 16:20:02 2008 +0100
31498 Update CHANGELOG for release.
31500 Signed-off-by: Wolfgang Denk <wd@denx.de>
31502 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
31503 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31504 Date: Sun Mar 9 14:52:11 2008 +0100
31506 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
31508 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31509 Signed-off-by: Wolfgang Denk <wd@denx.de>
31511 commit db695b78515ddb88a2d4f3357c120345efbf59ec
31512 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31513 Date: Sun Mar 9 10:44:01 2008 +0100
31515 scb9328: Fix flash warning: type qualifiers ignored on function return type
31517 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31519 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
31520 Author: Wolfgang Denk <wd@denx.de>
31521 Date: Sun Mar 9 10:50:41 2008 +0100
31523 esd/common/fpga.c: fix indentation.
31525 Signed-off-by: Wolfgang Denk <wd@denx.de>
31527 commit cc3843e36453e2b8db65d7e56de938ba045016a0
31528 Author: Wolfgang Denk <wd@denx.de>
31529 Date: Sun Mar 9 10:33:31 2008 +0100
31531 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
31533 and get rid of a couple of unneeded casts.
31535 Signed-off-by: Wolfgang Denk <wd@denx.de>
31537 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
31538 Author: Wolfgang Denk <wd@denx.de>
31539 Date: Sun Mar 9 10:09:53 2008 +0100
31541 esd/common/fpga.c: fix 'assignment of read-only location' error
31543 Signed-off-by: Wolfgang Denk <wd@denx.de>
31545 commit c6fe4dabac066e8758345d249032768496983a3e
31546 Author: Wolfgang Denk <wd@denx.de>
31547 Date: Sun Mar 9 02:13:19 2008 +0100
31549 Makefile: make build silently again.
31551 Signed-off-by: Wolfgang Denk <wd@denx.de>
31553 commit 76babc86576f092573599334c85ec543fdbc6015
31554 Author: Wolfgang Denk <wd@denx.de>
31555 Date: Sun Mar 9 02:07:49 2008 +0100
31557 m501sk: Fix out of tree building
31559 Signed-off-by: Wolfgang Denk <wd@denx.de>
31561 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
31562 Author: Wolfgang Denk <wd@denx.de>
31563 Date: Sun Mar 9 00:06:09 2008 +0100
31565 ADS5121: fix out of tree build
31567 and simplify Makefile a bit.
31569 Signed-off-by: Wolfgang Denk <wd@denx.de>
31571 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
31572 Author: Wolfgang Denk <wd@denx.de>
31573 Date: Sat Mar 8 22:35:31 2008 +0100
31577 Signed-off-by: Wolfgang Denk <wd@denx.de>
31579 commit 78a90f827df74520e939c794fc7413dace21c4db
31580 Author: Wolfgang Denk <wd@denx.de>
31581 Date: Sat Mar 8 22:35:04 2008 +0100
31585 Signed-off-by: Wolfgang Denk <wd@denx.de>
31587 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
31588 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31589 Date: Sat Mar 8 21:30:04 2008 +0100
31591 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
31593 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31595 commit d75469d48c05795144f4b8ba76addbb4920a7bba
31596 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
31597 Date: Sat Mar 8 09:25:49 2008 +0900
31599 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
31601 When rtl_recv() of rtl8169 is called, OWNbit of status register
31602 is not enable occasionally.
31603 rtl_recv() doesn't work normally when the driver doesn't do
31604 appropriate processing.
31605 This patch fix this problem.
31607 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
31609 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
31610 Author: Heiko Schocher <hs@denx.de>
31611 Date: Fri Mar 7 08:15:28 2008 +0100
31613 mgsuvd: update board configuration
31615 initialize the UPIOx controller.
31617 Signed-off-by: Heiko Schocher <hs@denx.de>
31619 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
31620 Author: Heiko Schocher <hs@denx.de>
31621 Date: Fri Mar 7 08:13:41 2008 +0100
31623 mgcoge: update board configuration
31625 add support for the config Flash.
31626 initialize the UPIOx controller.
31628 Signed-off-by: Heiko Schocher <hs@denx.de>
31630 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
31631 Author: Kim Phillips <kim.phillips@freescale.com>
31632 Date: Fri Mar 7 12:27:31 2008 -0600
31634 mpc83xx: make dtb basename file references equal those of linux
31636 the dts file basenames were updated in linux - this helps avoid
31637 inadvertently loading any old dtbs laying around.
31639 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31641 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
31642 Author: Kim Phillips <kim.phillips@freescale.com>
31643 Date: Wed Feb 27 16:08:22 2008 -0600
31645 net: uec_phy: actually increment the timeout counter
31647 allow u-boot to recover (and, e.g., switch to another interface) in the
31648 case where a PHY does not report autonegotiation is complete within its
31649 two second timeout value.
31651 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31653 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
31654 Author: Markus Brunner <super.firetwister@googlemail.com>
31655 Date: Wed Mar 5 21:38:12 2008 +0100
31657 fix taihu soft spi_read
31659 The taihu board used gpio_read_out_bit which reads the output register and not
31662 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
31664 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
31665 Author: Stefan Roese <sr@denx.de>
31666 Date: Fri Mar 7 08:01:43 2008 +0100
31668 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
31670 Signed-off-by: Stefan Roese <sr@denx.de>
31672 commit bd4458cb47abecabd406b1210457be96c69fc49d
31673 Author: Dave Liu <r63238@freescale.com>
31674 Date: Tue Mar 4 16:59:22 2008 +0800
31676 837xEMDS: Improve the system performance
31678 1. Make the CSB bus pipeline depth as 4, and enable
31680 2. Raise the eTSEC emergency priority;
31681 3. Use the highest IP blocks clock.
31683 Signed-off-by: Dave Liu <daveliu@freescale.com>
31685 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
31686 Author: Detlev Zundel <dzu@denx.de>
31687 Date: Thu Mar 6 16:45:53 2008 +0100
31689 Replace "run load; run update" with conditionalized "run load update".
31691 The latter version stops when "run load" fails for whatever reasons
31692 rendering the combination *a lot* more secure.
31694 Signed-off-by: Detlev Zundel <dzu@denx.de>
31696 commit 6bc113886d7d316df1a4e459bec8baf027518551
31697 Author: Stefan Roese <sr@denx.de>
31698 Date: Tue Mar 4 17:40:41 2008 +0100
31700 net: Print error message upon net usage when no ethernet-interface is found
31702 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
31703 defined. Then no ethernet interface is available but a simple "tftp"
31704 command will return without any error message which is quite confusing.
31706 Signed-off-by: Stefan Roese <sr@denx.de>
31708 commit a30a549a3553032d809e0356306b62de0b125901
31709 Author: Jon Loeliger <jdl@freescale.com>
31710 Date: Tue Mar 4 10:03:03 2008 -0600
31712 Remove erroneous or extra spd.h #includers.
31714 Many of the spd.h #includers don't need it,
31715 and wanted to have spd_sdram() declared instead.
31716 Since they didn't get that, some also had open
31717 coded extern declarations of it instead or as well.
31718 Fix it all up by using spd_sdram.h where needed.
31720 Signed-off-by: Jon Loeliger <jdl@freescale.com>
31722 commit a4475386cef14af3fd88f0518b688e755669486d
31723 Author: Wolfgang Denk <wd@denx.de>
31724 Date: Tue Mar 4 17:41:28 2008 +0100
31726 PCS440EP: fix build problems (redundant #define)
31728 Signed-off-by: Wolfgang Denk <wd@denx.de>
31730 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
31731 Author: Stefan Roese <sr@denx.de>
31732 Date: Tue Mar 4 17:39:25 2008 +0100
31734 net: Print error message upon net usage when no ethernet-interface is found
31736 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
31737 defined. Then no ethernet interface is available but a simple "tftp"
31738 command will return without any error message which is quite confusing.
31740 Signed-off-by: Stefan Roese <sr@denx.de>
31742 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
31743 Author: Wolfgang Denk <wd@denx.de>
31744 Date: Tue Mar 4 17:38:50 2008 +0100
31746 W7OLMC/W7OLMG: fix build problems (redundant #define)
31748 Signed-off-by: Wolfgang Denk <wd@denx.de>
31750 commit f9301e1cda296245ba052d7b08321199c3d0af9d
31751 Author: Wolfgang Denk <wd@denx.de>
31752 Date: Tue Mar 4 14:58:31 2008 +0100
31754 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
31756 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
31757 problem for out-of-tree builds which caused "make clean" to fail.
31759 Signed-off-by: Wolfgang Denk <wd@denx.de>
31761 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
31762 Author: Wolfgang Denk <wd@denx.de>
31763 Date: Tue Mar 4 11:58:26 2008 +0100
31765 examples/Makefile: build "hello_world" on 8xx, too.
31767 Signed-off-by: Wolfgang Denk <wd@denx.de>
31769 commit 74eb0222594fd23aafdf168e60e872814eea8b62
31770 Author: Mike Nuss <mike@terascala.com>
31771 Date: Mon Mar 3 15:27:05 2008 -0500
31773 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
31775 Every now and then a Sequoia board (or equivalent hardware) had
31776 problems connecting to a Gigabit capable network interface.
31778 There were differences in the PHY setup between Linux and U-Boot.
31780 This patch fixes the problem. Apparently "remote fault" is being set,
31781 which signals to some devices (on the other end of the cable) that a
31782 fault has occurred, while other devices ignore it. I believe the RF bit
31783 was causing the issue, but I removed T4 also, to match up with Linux.
31785 Signed-off-by: Mike Nuss <mike@terascala.com>
31787 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
31788 Author: Timur Tabi <timur@freescale.com>
31789 Date: Mon Mar 3 09:58:52 2008 -0600
31791 fix QE firmware uploading limit
31793 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
31794 systems with more than one RISC core.
31796 Signed-off-by: Timur Tabi <timur@freescale.com>
31798 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
31799 Author: Bernhard Nemec <bnemec@ganssloser.com>
31800 Date: Mon Mar 3 11:57:23 2008 +0000
31802 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
31804 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
31805 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
31807 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
31809 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
31810 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
31811 Date: Mon Mar 3 10:39:13 2008 +0200
31813 fix copy from ram to dataflash
31815 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
31816 routines instead of dataflash. This is because it checks "if source
31817 address is not dataflash" instead of target address.
31819 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
31821 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
31822 Author: Wolfgang Denk <wd@denx.de>
31823 Date: Mon Mar 3 12:16:44 2008 +0100
31825 Fix quoting problem (preboot setting) in many board config files.
31827 Signed-off-by: Wolfgang Denk <wd@denx.de>
31829 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
31830 Author: Wolfgang Denk <wd@denx.de>
31831 Date: Mon Mar 3 12:36:49 2008 +0100
31833 ADS5121: Fix default environment.
31835 Signed-off-by: Wolfgang Denk <wd@denx.de>
31837 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
31838 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31839 Date: Sun Mar 2 16:12:31 2008 +0100
31841 Makefile: Fix missing unconfig and mkconfig use
31843 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31845 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
31846 Author: michael <trimarchi@gandalf.sssup.it>
31847 Date: Sun Mar 2 23:33:46 2008 +0100
31849 Fix checking fat32 cluster size.
31851 This fixes the cluster size tests in the FAT32 file system.
31852 The current implementation of VFAT support doesn't work if the
31853 referred cluster has an offset > 16bit representation, causing
31854 "fatload" and "fatls" commands etc. to fail.
31856 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
31858 commit 661bad63a076a96c39c64f136915f146725af92b
31859 Author: Wolfgang Denk <wd@denx.de>
31860 Date: Sun Mar 2 22:57:23 2008 +0100
31862 Prepare v1.3.2-rc2 release candidate
31864 Signed-off-by: Wolfgang Denk <wd@denx.de>
31866 commit 76957cb3d621bf664311908e5962e151c633c285
31867 Author: Stefan Roese <sr@denx.de>
31868 Date: Sat Mar 1 12:11:40 2008 +0100
31870 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
31872 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
31873 currently 4k/2k is configured. This patch fixes this issue.
31875 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
31877 Signed-off-by: Stefan Roese <sr@denx.de>
31879 commit 118978c8eb43803e2794233922df4249fa278b83
31880 Author: Woodruff, Richard <r-woodruff2@ti.com>
31881 Date: Fri Feb 29 17:34:35 2008 -0600
31883 Fix alignment error on ARM for modules
31885 Fix alignment fault on ARM when running modules. With out an explicit
31886 linker file gcc4.2.1 will half word align __bss_start's value. The word
31887 dereference will crash hello_world.
31889 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
31891 commit ce1120dd703e6f12c59e4eba9962356a0300b832
31892 Author: Dave Liu <r63238@freescale.com>
31893 Date: Fri Feb 29 17:45:31 2008 +0800
31895 fs: Fix ext2 read issue
31897 The ext2 aligned process will corrupt the key
31898 data struct, the patch fix this.
31900 Signed-off-by: Dave Liu <daveliu@freescale.com>
31902 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
31903 Author: Wolfgang Denk <wd@denx.de>
31904 Date: Sun Mar 2 22:45:33 2008 +0100
31906 Makefile: cleanup "clean" target
31908 Make sure CDPATH settings cannot interfere.
31911 Signed-off-by: Wolfgang Denk <wd@denx.de>
31913 commit ffda586fc1373243c9794babde69500f6293a8d8
31914 Author: Li Yang <leoli@freescale.com>
31915 Date: Fri Feb 29 11:46:05 2008 +0800
31917 add cscope build target
31919 Add cscope build target to generate cscope database for code browsing.
31921 Signed-off-by: Li Yang <leoli@freescale.com>
31923 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
31924 Author: Kim Phillips <kim.phillips@freescale.com>
31925 Date: Wed Feb 27 15:06:39 2008 -0600
31927 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
31929 erratum 5.6 states the autoneg completion bit is functional only if the
31930 autoneg bit is asserted.
31932 This fixes any secondarily-issued networking commands on non-gigabit
31933 links on the mpc8360 mds board.
31935 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31937 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
31938 Author: John Rigby <jrigby@freescale.com>
31939 Date: Tue Feb 26 09:38:14 2008 -0700
31941 MPC5121e ADS PCI support take 3
31943 Adds PCI support for MPC5121
31945 Tested with drivers/net/rtl8139.c
31947 Support is conditional since PCI on old silicon does not work.
31949 ads5121_PCI_config turns on PCI
31951 In this version, condition compilation of PCI code has been moved
31952 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
31953 suggested by Jean-Christophe PLAGNIOL-VILLARD
31955 Signed-off-by: John Rigby <jrigby@freescale.com>
31957 commit 44b4dbed4133f657705b7c5193209da9978243a7
31958 Author: Anatolij Gustschin <agust@denx.de>
31959 Date: Mon Feb 25 23:53:07 2008 +0100
31961 Fix warnings while compilation of post/drivers/memory.c
31963 Fix warnings while compilation with new gcc in eldk-4.2
31965 Signed-off-by: Anatolij Gustschin <agust@denx.de>
31967 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
31968 Author: Anatolij Gustschin <agust@denx.de>
31969 Date: Mon Feb 25 20:54:04 2008 +0100
31971 ppc4xx: Fix problem in 4xx_enet.c driver
31973 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
31974 enabled. To reproduce the problem ensure that 'ethrotate'
31975 environment variable isn't set to "no" and then run
31976 "tftp 200000 not_existent_file".
31977 This patch tries to fix the issue.
31979 Signed-off-by: Anatolij Gustschin <agust@denx.de>
31981 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
31982 Author: Anatolij Gustschin <agust@denx.de>
31983 Date: Mon Feb 25 20:04:20 2008 +0100
31985 POST: Disable cache while SPR POST
31987 Currently (since commit b2e2142c) u-boot crashes on
31988 sequoia board while SPR test if CONFIG_4xx_DCACHE is
31989 enabled. This patch disables the cache while SPR test.
31991 Signed-off-by: Anatolij Gustschin <agust@denx.de>
31993 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
31994 Author: Martin Krause <martin.krause@tqs.de>
31995 Date: Mon Feb 25 17:52:40 2008 +0100
31997 TQM5200: use automatic fdt memory fixup (part 2)
31999 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
32000 TB5200 and TB5200_B to fixup the /memory node with the memory values
32001 detected by U-Boot.
32003 Signed-off-by: Martin Krause <martin.krause@tqs.de>
32005 commit 44ceec253ea941b301abf4b079d52324def69d92
32006 Author: Martin Krause <martin.krause@tqs.de>
32007 Date: Mon Feb 25 15:17:05 2008 +0100
32009 TQM5200: use automatic fdt memory fixup
32011 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
32012 TB5200 and TB5200_B to fixup the /memory node with the memory values
32013 detected by U-Boot.
32015 Signed-off-by: Martin Krause <martin.krause@tqs.de>
32017 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
32018 Author: Martin Krause <martin.krause@tqs.de>
32019 Date: Mon Feb 25 13:27:52 2008 +0100
32021 TQM5200: fix bug in SDRAM initialization code
32023 This patch fixes a bug in the SDRAM initialization code for the
32024 TQM5200. The hi_addr bit is now set correctly. Without this patch
32025 the hi_addr bit is always set to 1, if the second SDRAM bank is
32028 For other MPC5200 boards a correspondig patch has already been applied
32029 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
32031 Signed-off-by: Martin Krause <martin.krause@tqs.de>
32033 Forget the first patch please. I confused flash with SDRAM in
32036 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
32037 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32038 Date: Mon Feb 25 00:03:12 2008 +0100
32040 mx1fs2/flash: Fix multiple compiler warnings
32042 "pointer targets in assignment differ in signedness"
32044 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32046 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
32047 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32048 Date: Mon Feb 25 00:03:11 2008 +0100
32050 arm-imx: Fix register definitions
32052 Sync register definitions with linux
32054 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32056 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
32057 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32058 Date: Mon Feb 25 00:03:10 2008 +0100
32060 actua1/actua2/actua3: Fix multiple unused variable warnings
32063 actux1.c: In function 'checkboard':
32064 actux1.c:92: warning: unused variable 'revision'
32067 actux2.c: In function 'checkboard':
32068 actux2.c:100: warning: unused variable 's'
32069 actux2.c:99: warning: unused variable 'revision'
32070 actux2.c: In function 'reset_phy':
32071 actux2.c:130: warning: unused variable 'i'
32074 actux3.c: In function 'checkboard':
32075 actux3.c:114: warning: unused variable 'revision'
32077 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32079 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
32080 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32081 Date: Sun Feb 24 11:44:29 2008 +0900
32083 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
32085 The previous patch was lacking of i386, microblaze, nios and nios2. This
32086 patch tries to fix them.
32088 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32090 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
32091 Author: Marian Balakowicz <m8@semihalf.com>
32092 Date: Fri Feb 29 22:22:46 2008 +0100
32094 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
32096 Do not use global fdt blob pointer, calculate blob size from routine
32097 argument blob pointer.
32099 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32101 commit d1cc52879c8966507dad9fb575481e6d3985e64e
32102 Author: David Gibson <david@gibson.dropbear.id.au>
32103 Date: Tue Feb 12 00:58:31 2008 +1100
32105 libfdt: Add and use a node iteration helper function.
32107 This patch adds an fdt_next_node() function which can be used to
32108 iterate through nodes of the tree while keeping track of depth. This
32109 function is used to simplify the iteration code in a lot of other
32110 functions, and is also exported for use by library users.
32112 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
32114 commit 8cf30809a82902a471866d2f07725ce3b8a22291
32115 Author: Bartlomiej Sieka <tur@semihalf.com>
32116 Date: Fri Feb 29 16:00:24 2008 +0100
32118 [new uImage] Add libfdt support to mkimage
32120 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
32122 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
32123 Author: Bartlomiej Sieka <tur@semihalf.com>
32124 Date: Fri Feb 29 16:00:23 2008 +0100
32126 [new uImage] Add sha1.o object to mkimage binary build
32128 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
32130 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
32131 Author: Marian Balakowicz <m8@semihalf.com>
32132 Date: Fri Feb 29 16:00:06 2008 +0100
32134 [new uImage] Fix component handling for legacy multi component images
32136 Use uint32_t when accessing size table in image_multi_count() and
32137 image_multi_getimg() for multi component images.
32139 Add missing uimage_to_cpu() endianness conversion.
32141 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32143 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
32144 Author: Marian Balakowicz <m8@semihalf.com>
32145 Date: Fri Feb 29 15:59:59 2008 +0100
32147 [new uImage] Share common uImage code between mkimage and U-boot
32149 This patch adds the following common routines:
32151 1) Dedicated mkimage print_header() is replaced with common
32152 image_print_contents()
32153 image_print_contents_noindent()
32155 2) Common os/arch/type/comp fields name <--> id translation routines
32156 genimg_get_os_name()
32157 genimg_get_arch_name()
32158 genimg_get_type_name()
32159 genimg_get_comp_name()
32161 genimg_get_arch_id()
32162 genimg_get_type_id()
32163 genimg_get_comp_id()
32165 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32167 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
32168 Author: Marian Balakowicz <m8@semihalf.com>
32169 Date: Fri Feb 29 14:58:34 2008 +0100
32171 [new uImage] Update naming convention for bootm/uImage related code
32173 This patch introduces the following prefix convention for the
32174 image format handling and bootm related code:
32176 genimg_ - dual format shared code
32177 image_ - legacy uImage format specific code
32178 fit_ - new uImage format specific code
32179 boot_ - booting process related code
32181 Related routines are renamed and a few pieces of code are moved around and
32184 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32186 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
32187 Author: Kumar Gala <galak@kernel.crashing.org>
32188 Date: Wed Feb 27 21:51:51 2008 -0600
32190 [new uImage] Respect autostart setting in linux bootm
32192 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32193 Acked-by: Marian Balakowicz <m8@semihalf.com>
32195 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
32196 Author: Kumar Gala <galak@kernel.crashing.org>
32197 Date: Wed Feb 27 21:51:50 2008 -0600
32199 [new uImage] Provide ability to restrict region used for boot images
32201 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
32202 to restrict what memory range is used for bootm.
32204 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32205 Acked-by: Marian Balakowicz <m8@semihalf.com>
32207 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
32208 Author: Kumar Gala <galak@kernel.crashing.org>
32209 Date: Wed Feb 27 21:51:49 2008 -0600
32211 [new uImage] Use lmb for bootm allocations
32213 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
32214 functions over to using lmb for allocation of the ramdisk, command line
32215 and kernel bd info.
32217 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
32220 Provided a weak function that board code can call to do additional
32221 lmb reserves if needed.
32223 Also introduce the concept of bootmap_base to specify the offset in
32224 physical memory that the bootmap is located at. This is used for
32225 allocations of the cmdline, kernel bd, and device tree as they should
32226 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
32228 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32230 commit f5614e7926863bf0225ec860d9b319741a9c4004
32231 Author: Kumar Gala <galak@kernel.crashing.org>
32232 Date: Wed Feb 27 21:51:48 2008 -0600
32234 [new uImage] Add autostart flag to bootm_headers structure
32236 The autostart env variable was dropped as part of the initial new uImage
32237 cleanup. Add it back here so the arch specific code can decide if it
32238 wants to really boot or not.
32240 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32241 Acked-by: Marian Balakowicz <m8@semihalf.com>
32243 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
32244 Author: Kumar Gala <galak@kernel.crashing.org>
32245 Date: Wed Feb 27 21:51:47 2008 -0600
32247 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
32249 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
32250 the memory spaces used by various boot images and structures. This code
32251 will allow us to simplify the code in bootm and its support functions.
32253 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32255 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
32256 Author: Kumar Gala <galak@kernel.crashing.org>
32257 Date: Tue Feb 19 22:03:47 2008 -0600
32259 [new uImage] ppc: Allow boards to specify effective amount of memory
32261 For historical reasons we limited the stack to 256M because some boards
32262 could only map that much via BATS. However newer boards are capable of
32263 mapping more memory (for example 85xx is capable of doing up to 2G).
32265 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32266 Acked-by: Marian Balakowicz <m8@semihalf.com>
32268 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
32269 Author: Kumar Gala <galak@kernel.crashing.org>
32270 Date: Wed Feb 27 21:51:46 2008 -0600
32272 [new uImage] rework error handling so common functions don't reset
32274 Changed image_get_ramdisk() to just return NULL on error and have
32275 get_ramdisk() propogate that error to the caller. It's left to the
32276 caller to call do_reset() if it wants to.
32278 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
32279 to a common location. In the future we will change get_fdt() and
32280 fdt_relocate() to return success/failure and not call do_reset() at all.
32282 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32283 Acked-by: Marian Balakowicz <m8@semihalf.com>
32285 commit d2bc095a639672def11d5d043b5688d0dbd692ec
32286 Author: Kumar Gala <galak@kernel.crashing.org>
32287 Date: Wed Feb 27 21:51:45 2008 -0600
32289 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
32291 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
32292 however it does mean we have to go in and fixup the initrd info since
32293 we don't know where it will be.
32295 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32297 commit 27953493ef025fb698d68c5dee39b36f01f4d530
32298 Author: Kumar Gala <galak@kernel.crashing.org>
32299 Date: Wed Feb 27 21:51:44 2008 -0600
32301 [new uImage] ppc: Determine if we are booting an OF style
32303 If we are bootin OF style than we can skip setting up some things
32304 that are used for the old boot method.
32306 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32307 Acked-by: Marian Balakowicz <m8@semihalf.com>
32309 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
32310 Author: Kumar Gala <galak@kernel.crashing.org>
32311 Date: Wed Feb 27 21:51:43 2008 -0600
32313 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
32315 We don't actually need the kdb param as we are just using it to get
32316 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
32317 boot via OF we might not actually fill out a kdb.
32319 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32320 Acked-by: Marian Balakowicz <m8@semihalf.com>
32322 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
32323 Author: Kumar Gala <galak@kernel.crashing.org>
32324 Date: Wed Feb 27 16:30:47 2008 -0600
32326 85xx: Don't icbi when unlocking the cache
32328 There is no reason to icbi when invalidating the temporary stack in
32329 the d-cache. Its impossible on e500 to have the i-cache contain
32330 any addresses in the temp stack and it can be problematic in generating
32331 transactions on the bus to non-valid addresses.
32333 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32335 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
32336 Author: Andy Fleming <afleming@freescale.com>
32337 Date: Wed Feb 27 15:50:50 2008 -0600
32339 Fix source for ECM error IVPR
32341 The source vector for the ECM was being set to 2,
32342 but that's what the source vector for DDR was being
32343 set to. Change it to 1.
32345 Signed-off-by: Andy Fleming <afleming@freescale.com>
32347 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
32348 Author: Andy Fleming <afleming@freescale.com>
32349 Date: Wed Feb 27 14:29:58 2008 -0600
32351 Invalidate INIT_RAM TLB mappings
32353 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
32354 mappings to be unguarded. This collided with an existing "bug"
32355 where the mappings for the INIT_RAM were being kept around.
32356 This meant that speculative loads to those addresses were
32357 succeeding in the TLB, and going out to the bus, where they
32358 were causing an exception (there's nothing at that address). The
32359 Flash code was coincidentally causing such a speculative load.
32360 Rather than go back to mapping the INIT RAM as guarded, we fix
32361 it so that the entries for the INIT_RAM are invalidated. Thus
32362 the speculative loads will fail in the TLB, and have no effect.
32364 Signed-off-by: Andy Fleming <afleming@freescale.com>
32366 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
32367 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32368 Date: Sun Feb 17 22:56:17 2008 +0100
32370 sbc8548: Fix Revision reading and unused variable 'path'
32372 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32374 commit 495d162374c472f46454453553382ad0735dc725
32375 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32376 Date: Sun Feb 17 22:56:16 2008 +0100
32378 sbc8548: Fix cfi flash bank declaration
32380 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32382 commit 4efbe9dbb129f857f27856936112c8c02f016be6
32383 Author: Marian Balakowicz <m8@semihalf.com>
32384 Date: Wed Feb 27 11:02:26 2008 +0100
32386 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
32388 Dual format image code must properly handle all three FDT passing methods:
32389 - raw FDT blob passed
32390 - FDT blob embedded in the legacy uImage
32391 - FDT blob embedded in the new uImage
32393 This patch enables proper raw FDT handling when no FIT imaeg support
32394 is compiled in. This is a bit tricky as we must dected FIT format even
32395 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
32396 blobs use tha same low level format (libfdt).
32398 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32400 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
32401 Author: Marian Balakowicz <m8@semihalf.com>
32402 Date: Wed Feb 27 11:02:26 2008 +0100
32404 [new uImage] POWERPC: Add image_get_fdt() routine
32406 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
32407 (3) or embedded in the new uImage. For the (2) case embedding image must be
32408 verified before we get FDT from it. This patch factors out legacy image
32409 specific verification routine to the separate helper routine.
32411 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32412 Acked-by: Kumar Gala <galak@kernel.crashing.org>
32414 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
32415 Author: Marian Balakowicz <m8@semihalf.com>
32416 Date: Wed Feb 27 11:02:07 2008 +0100
32418 [new uImage] Add image_get_kernel() routine
32420 Legacy image specific verification is factored out to a separate helper
32421 routine to keep get_kernel() generic and simple.
32423 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32424 Acked-by: Kumar Gala <galak@kernel.crashing.org>
32426 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
32427 Author: Marian Balakowicz <m8@semihalf.com>
32428 Date: Wed Feb 27 11:01:04 2008 +0100
32430 [new uImage] Move image verify flag to bootm_headers structure
32432 Do not pass image verification flag directly to related routines.
32433 Simplify argument passing and move it to the bootm_header structure which
32434 contains curently processed image specific data and is already being passed
32435 on the argument list.
32437 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32438 Acked-by: Kumar Gala <galak@kernel.crashing.org>
32440 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
32441 Author: Marian Balakowicz <m8@semihalf.com>
32442 Date: Wed Feb 27 11:00:47 2008 +0100
32444 [Makefile] Sort COBJS in lib_<arch> Makefiles
32446 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32448 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
32449 Author: Marian Balakowicz <m8@semihalf.com>
32450 Date: Wed Feb 27 11:00:47 2008 +0100
32452 [new uImage] Optimize gen_get_image() flow control
32454 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
32455 to do, update its control flow to better reflect that simple case.
32457 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32458 Acked-by: Kumar Gala <galak@kernel.crashing.org>
32460 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
32461 Author: Marian Balakowicz <m8@semihalf.com>
32462 Date: Mon Feb 4 08:28:17 2008 +0100
32464 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
32466 PPC specific FDT blob handling code is divided into two separate routines:
32468 get_fdt() - find and verify a FDT blob (either raw or image embedded)
32469 fdt_relocate() - move FDT blob to within BOOTMAP if needed
32471 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32472 Acked-by: Kumar Gala <galak@kernel.crashing.org>
32474 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
32475 Author: Jon Loeliger <jdl@freescale.com>
32476 Date: Mon Feb 25 13:13:37 2008 -0600
32478 86xx: Fix renamed GUR symbols in sbc8641d board.
32480 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
32481 (86xx: Fix GUR PCI config registers properly), we should have
32482 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
32483 symbols in the sbc8641d board as well. Fix this oversight.
32485 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32487 commit 64cd594e623c39f73964d18787763e4533f791f7
32488 Author: Stefan Roese <sr@denx.de>
32489 Date: Mon Feb 25 16:50:48 2008 +0100
32491 ppc4xx: Fix acadia_nand build problem
32493 Don't include testdram() on NAND-booting target acadia_nand. This saves
32494 a few bytes and makes the target build clean again.
32496 Signed-off-by: Stefan Roese <sr@denx.de>
32498 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
32499 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32500 Date: Sun Feb 24 23:03:12 2008 +0000
32502 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
32504 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32506 commit 724902c8464e610642b3a170278b99710325888e
32507 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32508 Date: Sun Feb 24 23:03:11 2008 +0000
32510 arm-imx: Fix registers definition
32512 Sync registers definition with linux
32514 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32516 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
32517 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32518 Date: Sun Feb 24 23:03:10 2008 +0000
32520 actua1/actua2/actua3: Fix multipleunused variable
32523 actux1.c: In function 'checkboard':
32524 actux1.c:92: warning: unused variable 'revision'
32527 actux2.c: In function 'checkboard':
32528 actux2.c:100: warning: unused variable 's'
32529 actux2.c:99: warning: unused variable 'revision'
32530 actux2.c: In function 'reset_phy':
32531 actux2.c:130: warning: unused variable 'i'
32534 actux3.c: In function 'checkboard':
32535 actux3.c:114: warning: unused variable 'revision'
32537 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32539 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
32540 Author: Marian Balakowicz <m8@semihalf.com>
32541 Date: Mon Feb 4 08:28:09 2008 +0100
32543 [new uImage] Add dual format uImage support framework
32545 This patch adds framework for dual format images. Format detection is added
32546 and the bootm controll flow is updated to include cases for new FIT format
32549 When the legacy (image_header based) format is detected appropriate
32550 legacy specific handling is invoked. For the new (FIT based) format uImages
32551 dual boot framework has a minial support, that will only print out a
32552 corresponding debug messages. Implementation of the FIT specific handling will
32553 be added in following patches.
32555 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32557 commit b29661fc1151077776454288051bc9a488351ce8
32558 Author: Wolfgang Denk <wd@denx.de>
32559 Date: Sun Feb 24 15:21:36 2008 +0100
32561 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
32563 Signed-off-by: Wolfgang Denk <wd@denx.de>
32565 commit 00b48a48424894daa589d166d73277830b1c6ac4
32566 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32567 Date: Sat Feb 23 12:15:56 2008 +0100
32569 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
32571 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32573 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
32574 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32575 Date: Sat Feb 23 17:24:16 2008 +0900
32577 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
32579 ----------------------------------------------------------------
32580 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
32582 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
32585 GCC can be made to warn about usage of long long types with ISO C90
32586 (-ansi), but only with -pedantic. You can write this in a way that even
32587 then it doesn't cause warnings, namely by:
32590 __extension__ typedef __signed__ long long __s64;
32591 __extension__ typedef unsigned long long __u64;
32594 The __extension__ keyword in front of this switches off any pedantic
32595 warnings for this expression.
32597 Signed-off-by: Olaf Hering <olh@suse.de>
32598 Cc: <linux-arch@vger.kernel.org>
32599 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
32600 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
32601 ----------------------------------------------------------------
32603 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32605 commit 208acd112e6517b21fc30c420396902b103563ac
32606 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32607 Date: Sat Feb 23 17:07:57 2008 +0900
32609 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
32611 This will reduce the build time.
32613 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32615 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
32616 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32617 Date: Sat Feb 23 17:05:00 2008 +0900
32619 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
32621 This will reduce the build time.
32623 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32625 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
32626 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32627 Date: Sat Feb 23 16:58:41 2008 +0900
32629 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
32631 This reduces the build time by ~10%. Here's the gth2_config example.
32634 real 0m31.441s 0m27.833s
32635 user 0m24.766s 0m23.045s
32636 sys 0m10.425s 0m7.468s
32638 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32640 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
32641 Author: Marcel Moolenaar <marcelm@juniper.net>
32642 Date: Fri Feb 22 10:48:07 2008 -0800
32644 make define2mk.sed work on FreeBSD
32646 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
32647 the define2mk.sed script was identified as the source of the link
32648 failure on FreeBSD. The problem is that sed(1) does not always support
32649 the '+' operator. It isn't on FreeBSD. The attach patch implements the
32650 equivalent, using the '*' operator instead and should work everywhere.
32652 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
32654 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
32655 Author: Detlev Zundel <dzu@denx.de>
32656 Date: Fri Feb 22 17:21:32 2008 +0100
32658 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
32660 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
32661 final traces of long-deprecated "ramdisk" kernel parm") makes these
32662 changes neccessary.
32664 Signed-off-by: Detlev Zundel <dzu@denx.de>
32666 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
32667 Author: Larry Johnson <lrj@acm.org>
32668 Date: Thu Feb 21 13:58:16 2008 -0500
32670 LM75 bug fix for negative temperatures
32672 When the LM75 temperature sensor measures a temperature below 0 C, the
32673 current driver does not perform sign extension, so the result returned is
32674 256 C too high. This patch fixes the problem.
32676 Signed-off-by: Larry Johnson <lrj@acm.org>
32678 commit 5a910c224b13e413bda41922379add6d75c32da3
32679 Author: Heiko Schocher <hs@denx.de>
32680 Date: Thu Feb 21 18:33:45 2008 +0100
32682 IDS8247: update MAINTAINER entry.
32684 Signed-off-by: Heiko Schocher <hs@denx.de>
32686 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
32687 Author: Heiko Schocher <hs@denx.de>
32688 Date: Thu Feb 21 18:31:15 2008 +0100
32690 Fix device tree for mgsuvd board.
32692 Rename the "scc" node in "ethernet" for the mgsuvd board.
32694 Signed-off-by: Heiko Schocher <hs@denx.de>
32696 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
32697 Author: Yuri Tikhonov <yur@emcraft.com>
32698 Date: Thu Feb 21 14:23:42 2008 +0100
32700 lwmon5: enable hardware watchdog
32702 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
32703 causing it to reboot the board if U-Boot does a long busy-wait with
32704 udelay(). Thus, for these boards we have to restart WD more
32707 This patch splits the busy-wait udelay() into smaller, predefined,
32708 intervals, so that the watchdog timer may be resetted with the
32709 configurable (CONFIG_WD_PERIOD) interval.
32711 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
32713 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
32714 Author: Anatolij Gustschin <agust@denx.de>
32715 Date: Thu Feb 21 12:52:29 2008 +0100
32717 ppc4xx: Support for ATI Radeon 9200 card on sequoia
32719 Adds configuration option for ATI Radeon 9200 card
32720 support to sequoia config file. If CONFIG_VIDEO
32721 is enabled, TEXT_BASE should be changed to 0xFFF80000.
32723 Signed-off-by: Anatolij Gustschin <agust@denx.de>
32725 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
32726 Author: Kumar Gala <galak@kernel.crashing.org>
32727 Date: Mon Feb 18 08:18:07 2008 -0600
32729 Remove duplicate defines for ARRAY_SIZE
32731 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
32732 the define in common.h.
32734 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32736 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
32737 Author: Kumar Gala <galak@kernel.crashing.org>
32738 Date: Mon Feb 18 08:09:37 2008 -0600
32740 ppc: Allow boards to specify effective amount of memory
32742 For historical reasons we limited the stack to 256M because some boards
32743 could only map that much via BATS. However newer boards are capable of
32744 mapping more memory (for example 85xx is capable of doing up to 2G).
32746 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32748 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
32749 Author: Mike Frysinger <vapier@gentoo.org>
32750 Date: Mon Feb 18 05:24:13 2008 -0500
32752 include autoconf.mk before any other .mk files
32754 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
32755 those .mk files can have make if statements based on the current config.
32757 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32759 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
32760 Author: Mike Frysinger <vapier@gentoo.org>
32761 Date: Mon Feb 18 05:10:07 2008 -0500
32763 error check autoconf.mk generation
32765 If any of the steps for generating autoconf.mk fail currently, they go
32766 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
32767 This is simpler and more robust than placing '|| exit $$?' after every line.
32769 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32771 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
32772 Author: Stefano Babic <sbabic@denx.de>
32773 Date: Mon Feb 18 08:03:51 2008 +0100
32775 Fix bug in dependency checking
32777 By adding VERSION_FILE to the PHONY targets the script
32778 /tools/setlocalversion is always called and version_autogenerated.h
32779 is replaced only if the script find a modified source file.
32781 Signed-off-by: Stefano Babic <sbabic@denx.de>
32783 commit 98ba144ccc912eee90dd42699f023c497ce774c6
32784 Author: Kyungmin Park <kmpark@infradead.org>
32785 Date: Mon Feb 18 14:35:43 2008 +0900
32787 Fix GPMC CS2 memory setup at apollon
32789 It disables the current map first
32791 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
32793 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
32794 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32795 Date: Sun Feb 17 23:52:46 2008 +0100
32797 uli526x: Fix multiple differ in signedness and parentheses around comparison
32799 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32801 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
32802 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32803 Date: Sun Feb 17 16:58:04 2008 +0100
32805 MIPS: Fix CFG_NO_FLASH support
32807 - Fix flash_init call when CFG_NO_FLASH is used
32808 - Remove no more needed flash.c for qemu-mips
32810 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32812 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
32813 Author: Mike Frysinger <vapier@gentoo.org>
32814 Date: Sat Feb 16 02:40:18 2008 -0500
32816 easylogo: clean up some more and add -r (rgb) support
32818 Michael Hennerich added support for outputting an image in RGB format rather
32819 than forcing YUYV all the time. This makes obvious sense if the display you
32820 have takes RGB input rather than YUYV.
32822 Rather than hack in support for options, I've converted it to use getopt and
32823 cleaned up the argument parsing in the process.
32825 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
32826 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32828 commit f65c98129ccada3f7caf97d80395a95b84e911de
32829 Author: Mike Frysinger <vapier@gentoo.org>
32830 Date: Sat Feb 16 02:12:37 2008 -0500
32832 Makefile: add target for $(LDSCRIPT)
32834 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
32835 then change into the board directory and try and create it. This allows you
32836 to generate the linker script on the fly based upon board defines (like the
32837 Blackfin boards do).
32839 There should be no regressions due to this change as the normal case is to
32840 already have a u-boot.lds file. If that's the case, then there's nothing to
32841 generate, and so make will always exit. The fix here is that if the linker
32842 script does not exist, the implicit rules take over and attempt to guess how
32843 to generate the file.
32845 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32847 commit 5583cbf736474ef754e128a54fb78632f57b48fd
32848 Author: Marian Balakowicz <m8@semihalf.com>
32849 Date: Thu Feb 21 17:27:49 2008 +0100
32851 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
32853 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32855 commit 2242f5369822bc7780db95c47985bb408ea9157b
32856 Author: Marian Balakowicz <m8@semihalf.com>
32857 Date: Thu Feb 21 17:27:41 2008 +0100
32859 [new uImage] Rename and move print_image_hdr() routine
32861 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32863 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
32864 Author: Marian Balakowicz <m8@semihalf.com>
32865 Date: Thu Feb 21 17:20:20 2008 +0100
32867 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
32869 Introducing routines for parsing new uImage format bootm arguments:
32870 [<addr>]#<conf> - configuration specification
32871 [<addr>]:<subimg> - subimage specification
32873 New format images can contain multiple subimages of the same type. For example
32874 a single new format image file can contain three kernels, two ramdisks and a
32875 couple of FDT blobs. Subimage and configuration specifications are extensions
32876 to bootm (and other image-related commands) arguments' syntax that allow to
32877 specify which particular subimage should be operated on.
32879 Subimage specification is used to denote a particular subimage. Configurations
32880 are a bit more complex -- they are used to define a particualr booting setup,
32881 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
32884 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32886 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
32887 Author: Marian Balakowicz <m8@semihalf.com>
32888 Date: Thu Feb 21 17:20:19 2008 +0100
32890 [new uImage] Add gen_get_image() routine
32892 This routine assures that image (whether legacy or FIT) is not
32893 in a special dataflash storage.
32895 If image address is a dataflash address image is moved to system RAM.
32897 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32899 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
32900 Author: Marian Balakowicz <m8@semihalf.com>
32901 Date: Thu Feb 21 17:20:18 2008 +0100
32903 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
32905 New uImage format (Flattened Image Tree) requires libfdt
32906 functionality, print out error message if CONFIG_OF_LIBFDT
32909 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
32910 This commit turns it on by default.
32912 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32914 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
32915 Author: Michael Schwingen <michael@schwingen.org>
32916 Date: Mon Feb 18 23:16:35 2008 +0100
32918 CFI: Do not use uninitialized cmd_reset
32920 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
32923 From a short test, it looks like AMD-style flash roms treat *any* unknown
32924 command write as a reset, at least when in CFI Query mode, so issuing the
32925 Intel reset command to AMD-style flashs seems safe (from the small sample I
32926 have), plus the 3-cycle magic sequence should kick the state machine into
32927 the right state even without a reset command. Since the AMD-style flashs
32928 require the unlock sequence for real operation, I chose to try the AMD reset
32929 command first, so that Intel flashs do no see an invalid command prior to
32932 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
32933 plus Intel StrataFlash.
32935 Signed-off-by: Michael Schwingen <michael@schwingen.org>
32936 Signed-off-by: Stefan Roese <sr@denx.de>
32938 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
32939 Author: Rafal Jaworowski <raj@semihalf.com>
32940 Date: Thu Feb 21 11:56:44 2008 +0100
32942 API: Add (c) and licensing notice to the public API header.
32944 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
32946 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
32947 Author: Yuri Tikhonov <yur@emcraft.com>
32948 Date: Thu Feb 21 11:06:07 2008 +0100
32950 Fix CPU POST test failure
32952 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
32953 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
32954 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
32955 This patch just saves the CR value before running the test code, so allowing
32956 it to do anything it wants with CR.
32958 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
32959 Acked-by: Yuri Tikhonov <yur@emcraft.com>
32962 commit d5908b093955415f3d340706378b991f911af671
32963 Author: Jon Loeliger <jdl@freescale.com>
32964 Date: Wed Feb 20 15:26:51 2008 -0600
32966 8610HPCD: Document the flashbank selection switches.
32968 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32970 commit a551cee99ad1d1da20fd23ad265de47448852f56
32971 Author: Jon Loeliger <jdl@freescale.com>
32972 Date: Wed Feb 20 14:22:26 2008 -0600
32974 86xx: Fix GUR PCI config registers properly.
32976 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
32977 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
32978 botched it due to not realizing that 8610 and 8641 had different
32979 Global Utility Register defintions, one of which was like 85xx,
32980 and the other wasn't. Correct this problem by introducing two
32981 symbols, one for each 86xx SoC, but neither of which is named
32982 anything like 85xx.
32984 My bad. Lovely Wednesday with git bisect. You know.
32986 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32988 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
32989 Author: Jon Loeliger <jdl@freescale.com>
32990 Date: Wed Feb 20 12:24:11 2008 -0600
32992 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
32994 Without an actual supported video card hooked up, enabling
32995 the CONFIG_VIDEO by default just makes it look broken by
32996 routing all console output to the video card. Don't.
32998 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33000 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
33001 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33002 Date: Wed Jan 30 15:08:15 2008 -0600
33004 ColdFire: Fix missing code flash size for M5485EVB
33006 Signed-off-by: James Mahan <kmahan@freescale.com>
33007 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33009 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
33010 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33011 Date: Wed Jan 30 15:04:42 2008 -0600
33013 ColdFire: Fix 5282 and 5271 interrupt mask bit
33015 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33017 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
33018 Author: Jon Loeliger <jdl@freescale.com>
33019 Date: Tue Feb 19 12:31:08 2008 -0600
33021 8610HPCD: Fix typos in two PCI setup registers.
33023 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
33024 were erroneously present as 85xx names and values, leftover from
33025 the clone wars. Fix this by removing the 85xx cruft from the
33028 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33030 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
33031 Author: Jon Loeliger <jdl@freescale.com>
33032 Date: Mon Feb 18 14:01:56 2008 -0600
33034 86xx: Convert sbc8641d to use libfdt.
33036 This is the proper fix for a missing closing brace in the function
33037 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
33038 The ft_cpu_setup() function in mpc8641hpcn.c should have been
33039 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
33040 but was missed. Only, the sbc8641d was nominally still using it.
33041 It all got ripped out, and the funcality that was in ft_board_setup()
33042 was refactored to remove the CPU portions into the new file
33043 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
33045 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
33047 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33049 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
33050 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33051 Date: Sun Feb 17 23:35:31 2008 +0100
33053 mpc86xx: Fix unused variable 'config' and 'immap'
33055 and remove useless CONFIG_DDR_INTERLEAVE
33057 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33059 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
33060 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33061 Date: Sun Feb 17 23:03:36 2008 +0100
33063 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
33065 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33067 commit b6f29c84c208a091f95a10cbc9852d729659ba20
33068 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33069 Date: Sun Feb 17 14:15:31 2008 +0100
33071 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
33073 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33075 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
33076 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33077 Date: Sun Feb 17 14:15:32 2008 +0100
33079 pxa: fix assignment from incompatible pointer type
33081 fix mmc_bread function prototype
33083 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33085 commit 64d792063fff90b8118179b092feee09fe5cae13
33086 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33087 Date: Sun Feb 17 14:15:30 2008 +0100
33089 at91cap9adk: fix implicit declaration of function 'eth_init'
33091 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33093 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
33094 Author: Wolfgang Denk <wd@denx.de>
33095 Date: Sun Feb 17 15:43:44 2008 +0100
33097 Remove files added by mistake, update CHANGELOG.
33099 Signed-off-by: Wolfgang Denk <wd@denx.de>
33101 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
33102 Author: Mike Nuss <mike@terascala.com>
33103 Date: Wed Feb 6 11:10:11 2008 -0500
33105 PPC440EPx: Optionally enable second I2C bus
33107 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
33108 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
33109 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
33111 Signed-off-by: Mike Nuss <mike@terascala.com>
33112 Cc: Stefan Roese <sr@denx.de>
33114 commit ef5b4f221c22d05770878513951745f236b5b43f
33115 Author: Niklaus Giger <niklaus.giger@netstal.com>
33116 Date: Tue Feb 5 10:26:44 2008 +0100
33118 ppc4xx: HCU4/5. Cleanup configs
33120 - hcu4.h: Removed define of CONFIG_PPC405GPr
33121 - Corrected phy addresses
33122 - Fix boot variables
33123 - Respect line length of 80 chars
33125 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33127 commit 74973126d1be63ac75bdc192f46234dca3a7c421
33128 Author: Niklaus Giger <niklaus.giger@netstal.com>
33129 Date: Tue Feb 5 11:31:28 2008 +0100
33131 ppc4xx: HCU4/5. Cleanups
33133 - Fix some coding style violations.
33134 - Use in/out_u16/32 where appropriate.
33135 - Use register names from ppc405.h.
33136 - Fix trace useage for Lauterbach.
33137 - Remove obsolete generation HCU2.
33138 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
33140 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33142 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
33143 Author: Niklaus Giger <niklaus.giger@netstal.com>
33144 Date: Tue Feb 5 10:26:41 2008 +0100
33146 ppc4xx: PPC405GPr fix missing register definitions
33148 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33150 commit 214398d9cb22268d9d4f7563359edca0f78297a2
33151 Author: Larry Johnson <lrj@acm.org>
33152 Date: Fri Jan 18 21:49:05 2008 -0500
33154 ppc4xx: Beautify configuration files for Sequoia and Korat boards
33156 Signed-off-by: Larry Johnson <lrj@acm.org>
33158 commit 30c6a241e88499f536e86d325759e29ba00ff67f
33159 Author: Anatolij Gustschin <agust@denx.de>
33160 Date: Fri Feb 15 20:09:01 2008 +0100
33162 Wipe out assembler warnings while compiling x86 biosemu
33164 This patch tries to get rid of some assembler warnings about
33165 changed .got2 section type while compiling x86 bios emulator
33168 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33170 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
33171 Author: Wolfgang Denk <wd@denx.de>
33172 Date: Fri Feb 15 00:57:09 2008 +0100
33174 Prepare v1.3.2-rc1 release candidate
33176 commit f33e9653c9c09868995d788511d573771c209fe5
33177 Author: Anatolij Gustschin <agust@denx.de>
33178 Date: Fri Feb 15 00:13:20 2008 +0100
33180 Fix compile warning on lib_ppc/board.c
33182 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33184 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
33185 Author: Anatolij Gustschin <agust@denx.de>
33186 Date: Thu Feb 14 18:22:04 2008 +0100
33188 Add Radeon Mobility 9200 pci device id to the radeon driver
33190 This patch extends PCI device id table of the
33191 radeon driver so that the driver will also support
33192 Radeon Mobility 9200 (M9+) based boards.
33194 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33196 commit 1b8607e1f7143548c6062c28371449ec69588c00
33197 Author: Anatolij Gustschin <agust@denx.de>
33198 Date: Thu Feb 14 18:19:50 2008 +0100
33200 Extend ATI Radeon driver to support more video modes
33202 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
33203 800x600, 640x480 at 24, 16 and 8 bpp.
33205 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33207 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
33208 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33209 Date: Sun Feb 10 17:05:20 2008 +0100
33211 xsengine: fix typo and few coding style
33213 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33215 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
33216 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
33217 Date: Fri Feb 8 21:25:58 2008 +0100
33219 Fix wrong memory limit calculation in memory-test
33221 If the length of the memory address range passed to the "mtest" command is
33222 not of the form 2^x - 1, not all address lines are tested. This bug is
33223 inherited from the original software at
33224 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
33227 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
33229 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
33230 Author: Wolfgang Denk <wd@denx.de>
33231 Date: Fri Feb 15 00:11:39 2008 +0100
33233 Coding STyle cleanup.
33235 Signed-off-by: Wolfgang Denk <wd@denx.de>
33237 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
33238 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33239 Date: Tue Feb 5 13:30:43 2008 +0900
33241 sh: Fix register address of SH7722
33243 The address of SH7722 is wrong by old document.
33244 This patch fixes this problem.
33246 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33248 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
33249 Author: Mike Frysinger <vapier@gentoo.org>
33250 Date: Mon Feb 4 17:44:23 2008 -0500
33252 only update version header as needed
33254 Constantly rebuilding the version header will force useless relinking, so we
33255 simply need to compare the new header with the existing one before updating
33258 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33260 commit 208447f8e953f347425eb92c8e28d59e6d911363
33261 Author: Mike Frysinger <vapier@gentoo.org>
33262 Date: Mon Jan 28 05:56:19 2008 -0500
33264 Do not specify a CROSS_COMPILE default when executing size
33266 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33268 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
33269 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
33270 Date: Wed Feb 13 11:19:19 2008 +0100
33272 Fix return value of mtest when CFG_ALT_MEMTEST set
33274 Fix a missing return statement from a non-void function.
33276 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
33278 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
33279 Author: Timur Tabi <timur@freescale.com>
33280 Date: Wed Jan 9 14:35:26 2008 -0600
33282 85xx, 86xx: Determine I2C clock frequencies and store in global_data
33284 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
33286 Update the get_clocks() function in 85xx and 86xx to determine the I2C
33287 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
33289 Signed-off-by: Timur Tabi <timur@freescale.com>
33291 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
33292 Author: Wolfgang Denk <wd@denx.de>
33293 Date: Thu Feb 14 23:18:01 2008 +0100
33295 TQM834x: clean up configuration
33297 Get board name consistent with Linux and elsewhere;
33298 get rid of local network definitions etc.
33300 Signed-off-by: Wolfgang Denk <wd@denx.de>
33302 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
33303 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33304 Date: Thu Feb 14 08:02:12 2008 +0100
33306 TFTP: fix search of ':' in BootFile
33308 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33310 commit 0bc9efada170096c6b273f19165e32936d330d80
33311 Author: Wolfgang Denk <wd@denx.de>
33312 Date: Thu Feb 14 22:46:55 2008 +0100
33314 Coding style cleanup; update CHANGELOG.
33316 Signed-off-by: Wolfgang Denk <wd@denx.de>
33318 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
33319 Author: Wolfgang Denk <wd@denx.de>
33320 Date: Thu Feb 14 22:43:22 2008 +0100
33322 PPC: Use r2 instead of r29 as global data pointer
33324 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
33325 will refuse to use load/store multiple insns; instead, it issues a
33326 list of simple load/store instructions upon function entry and exit,
33327 resulting in bigger code size, which in turn makes the build for a
33332 Signed-off-by: Wolfgang Denk <wd@denx.de>
33334 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
33335 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
33336 Date: Wed Jan 30 09:08:49 2008 +0100
33338 ARM: make the machid configurable via the environment
33340 If the variable "machid" exists, let do_bootm_linux use that instead
33341 of bd->bi_arch_number.
33343 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
33345 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
33346 Author: Vlad Lungu <vlad@comsys.ro>
33347 Date: Wed Jan 23 16:34:46 2008 +0200
33349 Use #ifdef CONFIG_FSLDMAFEC
33351 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
33354 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
33356 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
33357 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33358 Date: Sat Jan 19 10:25:59 2008 +0900
33360 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
33362 Current MII_DEBUG is confusing in two ways. One is useless define-then-
33363 undef at the top of the file. The other is there is only one debug() in
33364 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
33365 While there are many useful printf()/puts() debug codes, but they are for
33366 DEBUG, not for MII_DEBUG.
33368 This patch tries to put them all together into MII_DEBUG and debug().
33370 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33372 commit 751b9b5189f3274b03c809172631316d6b002c82
33373 Author: Kyungmin Park <kmpark@infradead.org>
33374 Date: Thu Jan 17 16:43:25 2008 +0900
33376 OneNAND Initial Program Loader (IPL) support
33378 This patch enables the OneNAND boot within U-Boot.
33379 Before this work, we used another OneNAND IPL called X-Loader based
33380 on open source. With this work, we can build the oneboot.bin image
33381 without other program.
33383 The build sequence is simple.
33384 First, it compiles the u-boot.bin
33385 Second, it compiles OneNAND IPL
33386 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
33387 The mechanism is similar with NAND boot except it boots from itself.
33389 Another thing is that you can only use the OneNAND IPL only to work
33390 other bootloader such as RedBoot and so on.
33392 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
33394 commit 21f6f9636f0e978397548751347425fbf8d42bb3
33395 Author: Andy Fleming <afleming@freescale.com>
33396 Date: Wed Jan 16 13:06:59 2008 -0600
33398 Fix CONFIG_MMC usage in fat code
33400 A #if statement in fat.c depended on CONFIG_MMC, instead of
33401 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
33402 as "1" rather than just defined. Now it's better.
33404 Signed-off-by: Andy Fleming <afleming@freescale.com>
33406 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
33407 Author: Rafal Jaworowski <raj@semihalf.com>
33408 Date: Tue Jan 15 12:52:31 2008 +0100
33410 ppc: Refactor cache routines, so there is only one common set.
33412 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
33414 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
33415 Author: Jon Loeliger <jdl@jdl.com>
33416 Date: Wed Jan 23 15:55:02 2008 -0600
33418 86xx: Fix compilation warning in sys_eprom.c
33420 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
33422 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33424 commit 65230107025733e89e28fd5e5cfd916d4953c28a
33425 Author: Haavard Skinnemoen <hskinnemoen at>
33426 Date: Fri Feb 22 11:40:50 2008 +0000
33428 Move AT91RM9200DK board support under board/atmel
33430 We already have a vendor subdir for Atmel, so we should use it.
33432 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
33434 commit 6d0943a6be99977d6d853d51749e9963d68eb192
33435 Author: Andreas Engel <andreas.engel@ericsson.com>
33436 Date: Mon Jan 14 09:06:52 2008 +0000
33438 ARM: cleanup duplicated exception handlingcode
33440 Move duplicated exception handling code into lib_arm.
33442 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
33444 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
33445 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
33446 Date: Fri Feb 1 10:09:03 2008 +0000
33448 Support for Artila M-501 starter kit
33450 Kimmo Leppala / Sysart and
33451 Timo Tuunainen / Sysart
33453 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
33454 Author: Stelian Pop <stelian@popies.net>
33455 Date: Mon Feb 11 10:50:19 2008 +0000
33459 ---------------------------------
33461 read_dataflash() takes a signed char pointer as a parameter. Silence a
33462 few warnings dues to incorrect parameter types in env_dataflash.c.
33464 Signed-off-by: Stelian Pop <stelian@popies.net>
33466 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
33467 Author: Stelian Pop <stelian@popies.net>
33468 Date: Thu Feb 7 09:42:57 2008 +0000
33470 AT91CAP9 support : move board files to Atmel vendor directory.
33472 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
33474 Signed-off-by: Stelian Pop <stelian@popies.net>
33476 commit 7263ef191b87da94768f762c7093bedeb70db98f
33477 Author: Stelian Pop <stelian at>
33478 Date: Thu Jan 3 21:15:56 2008 +0000
33480 AT91CAP9 support : MACB changes
33482 Signed-off-by: Stelian Pop <stelian <at> popies.net>
33483 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
33485 commit 6afcabf11d7321850f4feaadfee841488ace54c5
33486 Author: Stelian Pop <stelian@popies.net>
33487 Date: Thu Feb 7 16:37:54 2008 +0000
33489 AT91CAP9 support : board/ files
33491 Signed-off-by: Stelian Pop <stelian@popies.net>
33493 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
33494 Author: Stelian Pop <stelian at>
33495 Date: Wed Jan 30 21:15:54 2008 +0000
33497 AT91CAP9 support : cpu/ files
33499 Signed-off-by: Stelian Pop <stelian <at> popies.net>
33501 commit fa506a926cec348805143576c941f8e61b333cc0
33502 Author: Stelian Pop <stelian@popies.net>
33503 Date: Thu Jan 31 21:15:53 2008 +0000
33505 AT91CAP9 support : include/ files
33507 Signed-off-by: Stelian Pop <stelian@popies.net>
33509 commit 20b197c6f2799af399a68f96a1aff543a75621b8
33510 Author: Stelian Pop <stelian@popies.net>
33511 Date: Sun Jan 20 19:49:21 2008 +0000
33513 AT91CAP9 support : build integration
33515 Signed-off-by: Stelian Pop <stelian@popies.net>
33517 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
33518 Author: Stelian Pop <stelian@popies.net>
33519 Date: Sun Jan 20 21:07:00 2008 +0000
33521 Improve DataFlash CS definition.
33523 Use a structure instead of the error prone unnamed array to
33524 define the possible dataflash banks.
33526 Signed-off-by: Stelian Pop <stelian@popies.net>
33528 commit a6cdd21b56014208706238712a853a9e9a0a2290
33529 Author: Stelian Pop <stelian@popies.net>
33530 Date: Sat Jan 19 21:09:35 2008 +0000
33532 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
33534 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
33536 cpu/arm926ejs/start.o: In function `cpu_init_crit':
33537 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
33539 Signed-off-by: Stelian Pop <stelian@popies.net>
33541 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
33542 Author: Peter Pearse <peter.pearse@arm.com>
33543 Date: Fri Feb 1 16:50:24 2008 +0000
33545 Fix timer overflow in DaVinci
33546 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
33548 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
33549 Author: Peter Pearse <peter.pearse@arm.com>
33550 Date: Fri Feb 1 16:49:08 2008 +0000
33552 Update board NetStar
33553 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
33555 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
33556 Author: Niklaus Giger <niklaus.giger@netstal.com>
33557 Date: Tue Feb 5 10:26:42 2008 +0100
33559 ppc4xx: HCU4/5. Fix make O=../xx
33561 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33563 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
33564 Author: Larry Johnson <lrj@acm.org>
33565 Date: Tue Jan 22 08:51:59 2008 -0500
33567 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
33569 Signed-off-by: Larry Johnson <lrj@acm.org>
33571 commit fe891ecf4d187e9d11dde869ed4623af52b54451
33572 Author: Hiroshi Ito <ito@mlb.co.jp>
33573 Date: Thu Jan 31 18:35:04 2008 +0900
33575 NFS Timeout with large files.
33577 Retry to send NFS packet before reaching timeout.
33579 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
33581 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
33582 Author: Johannes Stezenbach <js@sig21.net>
33583 Date: Tue Jan 29 00:11:25 2008 +0100
33585 Add dependencies to avoid race conditions with parallel make.
33587 Signed-off-by: Johannes Stezenbach <js@sig21.net>
33589 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
33590 Author: Mike Frysinger <vapier@gentoo.org>
33591 Date: Mon Jan 28 05:46:01 2008 -0500
33593 Mark board_init_[fr] as noreturn
33595 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33597 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
33598 Author: Mike Frysinger <vapier@gentoo.org>
33599 Date: Mon Jan 28 05:28:50 2008 -0500
33601 Only use TEXT_BASE if defined by the board
33603 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33605 commit 1b769881750030f10743808b9d6013e11f559350
33606 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33607 Date: Fri Jan 25 07:54:47 2008 +0100
33609 Fix remaining CONFIG_COMMANDS
33614 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33616 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
33617 Author: Niklaus Giger <niklaus.giger@netstal.com>
33618 Date: Mon Jan 21 16:46:00 2008 +0100
33620 Add *~ to .gitignore
33622 One should never add a backup file ending in with ~ to the git repository.
33624 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33626 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
33627 Author: Kumar Gala <galak@kernel.crashing.org>
33628 Date: Thu Jan 17 00:02:10 2008 -0600
33630 Remove duplicate defines for ARRAY_SIZE
33632 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33634 commit c77ce474b1c57b13e9d36d9830f147966c143694
33635 Author: Stelian Pop <stelian@popies.net>
33636 Date: Mon Jan 14 22:08:14 2008 +0100
33638 Fix incorrect address test in AT91F_DataflashSelect().
33640 Signed-off-by: Stelian Pop <stelian@popies.net>
33642 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
33643 Author: Kumar Gala <galak@kernel.crashing.org>
33644 Date: Wed Feb 13 15:09:58 2008 -0600
33646 Fix building of fdt_support.c if DEBUG set
33648 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33650 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
33651 Author: Jon Loeliger <jdl@freescale.com>
33652 Date: Tue Feb 12 14:53:28 2008 -0600
33654 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
33656 These replace direct structure references for IMMR sections.
33658 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33660 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
33661 Author: Wolfgang Denk <wd@denx.de>
33662 Date: Tue Feb 12 00:45:06 2008 +0100
33664 Get rid of "#undef DEBUG" from board config files.
33666 Signed-off-by: Wolfgang Denk <wd@denx.de>
33668 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
33669 Author: Timur Tabi <timur@freescale.com>
33670 Date: Tue Jan 15 17:09:41 2008 -0600
33672 Remove #undef DEBUG from MPC83xx board header files
33674 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
33675 The inclusion of this line makes it impossible to enable debug code in
33676 other source files, because "#define DEBUG" typically needs to be defined
33677 before any header files are included.
33679 Signed-off-by: Timur Tabi <timur@freescale.com>
33681 commit 69018ce2e086e9caf35b914d675b82bc4888f077
33682 Author: Kumar Gala <galak@kernel.crashing.org>
33683 Date: Thu Jan 17 08:25:45 2008 -0600
33685 QE: Move FDT support into a common file
33687 Move the flat device tree setup for QE related devices into
33688 a common file shared between 83xx & 85xx platforms that have QE's.
33690 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33692 commit 5cf746c303710329f8040d9c62ee354313e3e91f
33693 Author: Marian Balakowicz <m8@semihalf.com>
33694 Date: Thu Jan 31 13:59:09 2008 +0100
33696 [new uImage] Move kernel data find code to get_kernel() routine
33698 Verification of the kernel image (in old format) and finding kernel
33699 data is moved to a dedicated routine. The routine will also hold
33700 support for, to be added, new image format.
33702 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33704 commit 7b325454fd231d4273de3fe373850f777fb086bf
33705 Author: Marian Balakowicz <m8@semihalf.com>
33706 Date: Thu Jan 31 13:58:20 2008 +0100
33708 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
33710 Move FDT blob finding and relocation to a dedicated
33711 get_fdt() routine. It increases code readability and
33712 will make adding support for new uImage format easier.
33714 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33716 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
33717 Author: Marian Balakowicz <m8@semihalf.com>
33718 Date: Thu Jan 31 13:58:13 2008 +0100
33720 [new uImage] Cleanup do_botm_linux() boot allocations
33722 This patch moves common pre-boot allocation steps shared between PPC
33723 and M68K to a helper routines:
33726 - get_boot_sp_limit()
33727 - get_boot_cmline()
33731 - set_clocks_in_mhz()
33733 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33735 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
33736 Author: Marian Balakowicz <m8@semihalf.com>
33737 Date: Thu Jan 31 13:57:17 2008 +0100
33739 [new uImage] Move ramdisk loading to a common routine
33741 Ramdisk loading code, including initrd_high variable handling,
33742 was duplicated for PPC and M68K platforms. This patch creates
33743 common helper routine that is being called from both platform
33744 do_bootm_linux() routines.
33746 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33748 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
33749 Author: Marian Balakowicz <m8@semihalf.com>
33750 Date: Thu Jan 31 13:55:53 2008 +0100
33752 [new uImage] Removed dead ramdisk code on microblaze architectures
33754 Microblaze do_bootm_linux() includes ramdisk processing code but
33755 the ramdisk does not get used anywhere later on.
33757 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33759 commit 5ad03eb3854c162684222a718b44c0716ea0db03
33760 Author: Marian Balakowicz <m8@semihalf.com>
33761 Date: Thu Jan 31 13:55:39 2008 +0100
33763 [new uImage] Factor out common image_get_ramdisk() routine
33765 Architecture specific do_bootm_linux() routines share common
33766 ramdisk image processing code. Move this code to a common
33769 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33771 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
33772 Author: Marian Balakowicz <m8@semihalf.com>
33773 Date: Thu Jan 31 13:20:08 2008 +0100
33775 [new uImage] Move FDT error printing to common fdt_error() routine
33777 FDT error handling in PPC do_bootm_linux() shares the same message format.
33778 This patch moves error message printing to a helper fdt_error() routine.
33780 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33781 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33783 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
33784 Author: Marian Balakowicz <m8@semihalf.com>
33785 Date: Thu Jan 31 13:20:07 2008 +0100
33787 [new uImage] Factor out common routines for getting os/arch/type/comp names
33789 Move numeric-id to name translation for image os/arch/type/comp header
33790 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
33791 image_get_type_name(), image_get_comp_name().
33793 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33795 commit e99c26694a384221d336f6448c06a57479c0baa4
33796 Author: Marian Balakowicz <m8@semihalf.com>
33797 Date: Thu Jan 31 13:20:07 2008 +0100
33799 [new uImage] Remove standalone applications handling from boootm
33801 Standalone applications are supposed to be run using the "go" command.
33802 This patch removes standalone images handling from the do_bootm().
33804 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33806 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
33807 Author: Marian Balakowicz <m8@semihalf.com>
33808 Date: Thu Jan 31 13:20:07 2008 +0100
33810 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
33812 Support for OF_FLAT_TREE is to be obsoleted in the near future,
33813 remove related code from the bootm routines.
33815 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33817 commit 82850f3d32a2661868ec6876bed7a22c55cef718
33818 Author: Marian Balakowicz <m8@semihalf.com>
33819 Date: Thu Jan 31 13:20:06 2008 +0100
33821 [new uImage] Use image API in SH do_bootm_linux() routine
33823 Introduce image handling API for lately added Hitachi SH architecture.
33825 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33827 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
33828 Author: Marian Balakowicz <m8@semihalf.com>
33829 Date: Thu Jan 31 13:20:06 2008 +0100
33831 [new uImage] Rename architecture specific bootm code files
33833 Implementation of the do_bootm_linux() and other bootm helper routines is
33834 architecture specific code. As such it resides in lib_<arch> directories
33835 in files named <arch>_linux.c
33837 This patch renames those files to a more clear and accurate
33838 lib_<arch>/bootm.c form.
33840 List of the renamed files:
33841 lib_arm/armlinux.c -> lib_arm/bootm.c
33842 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
33843 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
33844 lib_i386/i386_linux.c -> lib_i386/bootm.c
33845 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
33846 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
33847 lib_mips/mips_linux.c -> lib_mips/bootm.c
33848 lib_nios/nios_linux.c -> lib_nios/bootm.c
33849 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
33850 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
33851 lib_sh/sh_linux.c -> lib_sh/bootm.c
33853 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33855 commit 7582438c285bf0cef82909d0f232de64ec567a8a
33856 Author: Marian Balakowicz <m8@semihalf.com>
33857 Date: Thu Jan 31 13:20:06 2008 +0100
33859 [new uImage] Return error on image move/uncompress overwrites
33861 Check for overwrites during image move/uncompress, return with error
33862 when the original image gets corrupted. Report clear message to the user
33863 and prevent further troubles when pointer to the corrupted images is passed
33864 to do_bootm_linux routine.
33866 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33868 commit f13e7b2e993c61fed1f607962501e051940d6e80
33869 Author: Marian Balakowicz <m8@semihalf.com>
33870 Date: Tue Jan 8 18:12:17 2008 +0100
33872 [new uImage] Cleanup image header pointer use in bootm code
33874 - use single image header pointer instead of a set of auxilliary variables.
33875 - add multi component image helper routines: get component size/data address
33877 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33879 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
33880 Author: Marian Balakowicz <m8@semihalf.com>
33881 Date: Tue Jan 8 18:17:10 2008 +0100
33883 [new uImage] Cleanup cmd_bootm.c
33885 - sort and cleanup headers, declarations, etc.
33886 - group related routines
33887 - cleanup indentation, white spaces
33889 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33891 commit af13cdbc01eaf88880978bfb4f603e012818ba24
33892 Author: Marian Balakowicz <m8@semihalf.com>
33893 Date: Tue Jan 8 18:11:45 2008 +0100
33895 [new uImage] Add memmove_wd() common routine
33897 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
33899 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33901 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
33902 Author: Marian Balakowicz <m8@semihalf.com>
33903 Date: Tue Jan 8 18:11:44 2008 +0100
33905 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
33907 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33909 commit 15158971f49255ccef54f0979a942cfd3de2ae52
33910 Author: Marian Balakowicz <m8@semihalf.com>
33911 Date: Tue Jan 8 18:11:44 2008 +0100
33913 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
33915 Use image header copy instead of a (possibly corrupted) pointer to
33916 a initial image location.
33918 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33920 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
33921 Author: Marian Balakowicz <m8@semihalf.com>
33922 Date: Tue Jan 8 18:11:44 2008 +0100
33924 [new uImage] Remove I386 uImage fake_header() routine
33926 I386 targets are not using a uImage format, instead fake header
33927 is added to ram image before it is further processed by bootm.
33929 Remove this fixup and force proper uImage use for I386.
33931 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33933 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
33934 Author: Marian Balakowicz <m8@semihalf.com>
33935 Date: Tue Jan 8 18:11:44 2008 +0100
33937 [new uImage] Move CHUNKSZ definition to image.h
33939 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
33940 move this definition to a common header.
33942 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33944 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
33945 Author: Marian Balakowicz <m8@semihalf.com>
33946 Date: Tue Jan 8 18:11:43 2008 +0100
33948 [new uImage] Move gunzip() common code to common/gunzip.c
33950 Move gunzip(), zalloc() and zfree() to a separate file.
33951 Share zalloc() and zfree() with cramfs uncompress routine.
33953 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33955 commit d45d5a18b6b36688f2365623f9d550566c664b5b
33956 Author: Marian Balakowicz <m8@semihalf.com>
33957 Date: Tue Jan 8 18:11:43 2008 +0100
33959 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
33961 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
33962 readable in PPC variant of do_bootm_linux() routine.
33964 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33966 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
33967 Author: Marian Balakowicz <m8@semihalf.com>
33968 Date: Tue Jan 8 18:11:43 2008 +0100
33970 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
33972 PPC implementation of do_bootm_linux() routine is moved to
33973 a dedicated file lib_ppc/ppc_linux.c
33975 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33977 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
33978 Author: Marian Balakowicz <m8@semihalf.com>
33979 Date: Tue Jan 8 18:14:09 2008 +0100
33981 [new uImage] Define a API for image handling operations
33983 - Add inline helper macros for basic header processing
33984 - Move common non inline code common/image.c
33985 - Replace direct header access with the API routines
33986 - Rename IH_CPU_* to IH_ARCH_*
33988 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33990 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
33991 Author: Marian Balakowicz <m8@semihalf.com>
33992 Date: Thu Jan 31 13:19:58 2008 +0100
33994 Add missing cmd_ximg.o to common/Makefile
33996 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33998 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
33999 Author: Grzegorz Bernacki <gjb@semihalf.com>
34000 Date: Mon Jan 28 10:15:02 2008 +0100
34002 ADS5121e: DDR2 init/timing update.
34004 Signed-off-by: John Rigby <jrigby@freescale.com>
34005 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34007 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
34008 Author: John Rigby <jrigby@freescale.com>
34009 Date: Wed Jan 30 13:36:57 2008 -0700
34011 Device tree updates
34013 Changes to match 5121 device tree going mainline in 2.6.25.
34015 Change OF_SOC from "soc5121" to plain "soc".
34016 Remove unneeded "ref-frequency" fixups.
34017 Remove "address" enetaddr fixup.
34019 Add bus-frequency fixup for old OF_SOC so old
34020 kernels with old device trees will work with new
34021 u-boot with 66MHz IPS clock
34023 Signed-off-by: John Rigby <jrigby@freescale.com>
34025 commit de55d18df3ff2ea614624e74793de7c43520e0e7
34026 Author: John Rigby <jrigby@freescale.com>
34027 Date: Wed Jan 30 13:36:56 2008 -0700
34029 Change IPS freq to 66MHz
34031 Recommended frequency is 66MHz
34032 Change divider from 4 to 3.
34034 Signed-off-by: John Rigby <jrigby@freescale.com>
34036 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
34037 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34038 Date: Mon Jan 14 22:38:55 2008 +0100
34040 xsengine: rename board_post_init to board_late_init
34042 missing migration from "Cleanup of some init functions"
34043 in c837dcb1a316745092567bfe4fb266d0941884ff
34045 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34047 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
34048 Author: Larry Johnson <lrj@acm.org>
34049 Date: Sat Jan 12 23:35:33 2008 -0500
34051 Add attribute POST_PREREL to ECC memory POST
34053 Signed-off-by: Larry Johnson <lrj@acm.org>
34055 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
34056 Author: Kumar Gala <galak@kernel.crashing.org>
34057 Date: Thu Jan 17 08:25:45 2008 -0600
34059 QE: Move FDT support into a common file
34061 Move the flat device tree setup for QE related devices into
34062 a common file shared between 83xx & 85xx platforms that have QE's.
34064 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34066 commit d38da537943cd36356b9d3d9d9b60533554b81d8
34067 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34068 Date: Wed Jan 23 17:20:14 2008 +0100
34070 AVR32: Make SDRAM refresh rate configurable
34072 The existing code assumes the SDRAM row refresh period should always
34073 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
34074 refresh rate should really be 7.81 us.
34076 Add a refresh_period member to struct sdram_info and initialize it
34077 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
34078 panic() until the refresh_period member is updated properly.
34080 Big thanks to Gerhard Berghofer for pointing out this issue.
34082 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34084 commit 61151cccb660cdb06a07fb283de6089913d7bde0
34085 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34086 Date: Thu Apr 19 10:10:11 2007 +0200
34088 ATSTK1000: Fix potential flash programming bug
34090 The (now obsolete) atngw100 flash programming code was having problems
34091 programming the onboard at49bv642 chip. The atstk1000 flash
34092 programming code may have the same bug, so import fix for this problem
34093 from the AVR32 Linux BSP.
34095 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34097 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
34098 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34099 Date: Thu Nov 22 17:04:13 2007 +0100
34101 ATSTK1004: Fix comment about default load address
34103 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
34104 wouldn't have worked anyway since the board can only access 4MB of
34107 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34109 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
34110 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34111 Date: Thu Nov 22 17:01:24 2007 +0100
34113 ATSTK1002: Use SDRAM + 4MB as default load address
34115 Many people run into problems when they compile a big kernel and load
34116 the uImage at the default SDRAM + 2MB address as the kernel will
34117 overwrite the uImage as it is being unpacked. Increase the default
34118 load address so that we can load a 4MB kernel image without any
34121 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34123 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
34124 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34125 Date: Thu Nov 22 16:51:39 2007 +0100
34127 ATNGW100: Fix default mtest range
34129 Let mtest cover the whole SDRAM except the last megabyte, which is
34130 where u-boot lives.
34132 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34134 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
34135 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34136 Date: Tue Jan 22 15:31:56 2008 +0900
34138 sh: Fix register address of SH7722.
34140 The address of SH7722 is wrong by old document.
34141 This patch fixes this problem.
34143 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34145 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
34146 Author: Mike Frysinger <vapier@gentoo.org>
34147 Date: Mon Feb 4 19:26:57 2008 -0500
34149 new command for displaying strings at specified memory locations
34151 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34153 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
34154 Author: Mike Frysinger <vapier@gentoo.org>
34155 Date: Mon Feb 4 19:26:57 2008 -0500
34157 rewrite/cleanup Blackfin RTC driver
34159 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34161 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
34162 Author: Mike Frysinger <vapier@gentoo.org>
34163 Date: Mon Feb 4 19:26:57 2008 -0500
34165 generate u-boot.ldr for Blackfin targets
34167 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34169 commit b779f7a59530436040f157f7841db7ab796542df
34170 Author: Mike Frysinger <vapier@gentoo.org>
34171 Date: Mon Feb 4 19:26:57 2008 -0500
34173 scrub unused symbols
34175 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34177 commit cc2977acc3bbbb7850f16645dd1081f95335868d
34178 Author: Mike Frysinger <vapier@gentoo.org>
34179 Date: Mon Feb 4 19:26:57 2008 -0500
34181 move Blackfin cpu object list to respective cpu directories
34183 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34185 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
34186 Author: Mike Frysinger <vapier@gentoo.org>
34187 Date: Mon Feb 4 19:26:57 2008 -0500
34189 interface to Blackfin on-chip One-Time-Programmable memory
34191 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34193 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
34194 Author: Mike Frysinger <vapier@gentoo.org>
34195 Date: Mon Feb 4 19:26:56 2008 -0500
34197 add support for memory commands with Blackfin L1 instruction memory
34199 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34201 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
34202 Author: Mike Frysinger <vapier@gentoo.org>
34203 Date: Mon Feb 4 19:26:56 2008 -0500
34205 use C code rather than inline assembly
34207 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34209 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
34210 Author: Mike Frysinger <vapier@gentoo.org>
34211 Date: Mon Feb 4 19:26:56 2008 -0500
34213 add Blackfin-specific reginfo command
34215 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34217 commit 0858b835e7ea501ea084d34cef75932f098342bb
34218 Author: Mike Frysinger <vapier@gentoo.org>
34219 Date: Mon Feb 4 19:26:55 2008 -0500
34221 add support for Blackfin symbol prefixes to examples
34223 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34225 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
34226 Author: Mike Frysinger <vapier@gentoo.org>
34227 Date: Mon Feb 4 19:26:55 2008 -0500
34229 add Blackfin-specific bdinfo command
34231 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34233 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
34234 Author: Mike Frysinger <vapier@gentoo.org>
34235 Date: Mon Feb 4 19:26:55 2008 -0500
34237 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
34239 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34241 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
34242 Author: Mike Frysinger <vapier@gentoo.org>
34243 Date: Mon Feb 4 19:26:55 2008 -0500
34245 unify the Blackfin board targets
34247 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34249 commit d4d7730853e5d675f76ec666807da3028c91d592
34250 Author: Mike Frysinger <vapier@gentoo.org>
34251 Date: Mon Feb 4 19:26:55 2008 -0500
34253 punt Blackfin VDSP headers and import sanitized/auto-generated ones
34255 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34257 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
34258 Author: Mike Frysinger <vapier@gentoo.org>
34259 Date: Mon Feb 4 19:26:54 2008 -0500
34261 always pull in asm/blackfin.h for Blackfin ports
34263 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34265 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
34266 Author: Mike Frysinger <vapier@gentoo.org>
34267 Date: Mon Feb 4 19:26:54 2008 -0500
34269 add missing __raw versions of Blackfin read/write io functions
34271 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34273 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
34274 Author: Mike Frysinger <vapier@gentoo.org>
34275 Date: Mon Feb 4 19:26:54 2008 -0500
34277 add the default Blackfin logo used by Blackfin boards with splash screens
34279 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34281 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
34282 Author: Mike Frysinger <vapier@gentoo.org>
34283 Date: Mon Feb 4 19:26:54 2008 -0500
34285 add some more Blackfin docs
34287 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34289 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
34290 Author: Mike Frysinger <vapier@gentoo.org>
34291 Date: Mon Feb 4 19:26:54 2008 -0500
34293 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
34295 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34297 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
34298 Author: Mike Frysinger <vapier@gentoo.org>
34299 Date: Mon Feb 4 19:26:54 2008 -0500
34301 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
34303 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34305 commit b45264ee85cbd92020640a32e02fb434fd557108
34306 Author: Mike Frysinger <vapier@gentoo.org>
34307 Date: Mon Feb 4 19:26:53 2008 -0500
34309 add gitignores for Blackfin pieces
34311 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34313 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
34314 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34315 Date: Fri Jan 18 01:14:03 2008 +0100
34317 TFTP: add host ip addr support
34319 allow to use a different server as set in serverip
34320 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
34321 if not defined the max length will be at 128
34323 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34325 commit e56b4b494cd92def577969f9678395aa22d34c9f
34326 Author: Timur Tabi <timur@freescale.com>
34327 Date: Wed Jan 9 14:35:26 2008 -0600
34329 85xx,86xx: Determine I2C clock frequencies and store in global_data
34331 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
34333 Update the get_clocks() function in 85xx and 86xx to determine the I2C
34334 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
34336 Signed-off-by: Timur Tabi <timur@freescale.com>
34338 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
34339 Author: Wolfgang Denk <wd@denx.de>
34340 Date: Thu Dec 27 10:56:54 2007 +0100
34342 OMAP5912: fix FIFO handling in UART driver
34344 According to the OMAP5912 Serial Interfaces Reference Guide (see
34345 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
34346 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
34347 changed when the baud clock is not running, i. e. when both DLL and
34350 Thus make sure that DLL and DLH are 0 when writing the FCR.
34352 Signed-off-by: Wolfgang Denk <wd@denx.de>
34354 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
34355 Author: Harald Welte <laforge@openmoko.org>
34356 Date: Wed Dec 19 15:10:52 2007 +0100
34358 ARM: S3C24x0 SoC NAND controller support
34360 This patch adds NAND support to the S3C24x0 SoC code in u-boot
34362 Signed-off-by: Harald Welte <laforge@openmoko.org>
34364 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
34365 Author: Harald Welte <laforge@openmoko.org>
34366 Date: Wed Dec 19 14:24:40 2007 +0100
34368 ARM: s3c24xx: Multiple serial port support
34370 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
34372 Signed-off-by: Harald Welte <laforge@openmoko.org>
34374 commit a25f72f1f73a11de68251fb88c89991e202e68fa
34375 Author: Harald Welte <laforge@openmoko.org>
34376 Date: Wed Dec 19 14:16:57 2007 +0100
34378 ARM: arm920t: Allow use of 'gd' pointer from IRQ
34380 This patch allows us to use the 'gd' pointer (and thus environment
34381 and everything else associated with it) from interrupt context on
34384 Signed-off-by: Harald Welte <laforge@openmoko.org>
34386 commit be19bd5cd0f454b63298844a0b5377e029b2caad
34387 Author: Harald Welte <laforge@openmoko.org>
34388 Date: Wed Dec 19 14:19:38 2007 +0100
34390 ARM: arm920/s3c24xx: IRQ demulitplexer callback
34392 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
34393 plus a stub implementation of it for the S3C2410.
34395 The purpose is to allow arm920t implementations such as the s3c24x0 to
34396 implement interrupt handlers in u-boot without having to touch core
34399 Signed-off-by: Harald Welte <laforge@openmoko.org>
34401 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
34402 Author: Hebbar <gururajakr@sanyo.co.in>
34403 Date: Tue Dec 18 16:03:07 2007 -0800
34405 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
34407 Add ifdef to bdinfo command to display ethernet information
34408 only if CONFIG_CMD_NET is defined for arm modules.
34410 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
34412 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
34413 Author: Hebbar <gururajakr@sanyo.co.in>
34414 Date: Tue Dec 18 16:00:54 2007 -0800
34416 ARM: add I2C init function call in lib_arm/board.c
34418 Adds I2C init func call to init sequence for ARM boards. This is
34419 present in ppc,blackfin and other processor init sequence.
34421 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
34423 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
34424 Author: Stefan Roese <sr@denx.de>
34425 Date: Fri Feb 1 09:38:29 2008 +0100
34427 ppc4xx: Fix ndfc HW ECC byte order
34429 The current ndfc HW ECC implementation swaps the first two ECC bytes.
34430 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
34431 so this swapping in the HW ECC driver is bogus. This patch fixes this
34432 problem and now really uses the SMC ECC byte order.
34434 Thanks to Sean MacLennan for pointing this out.
34436 Signed-off-by: Stefan Roese <sr@denx.de>
34438 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
34439 Author: Stefan Roese <sr@denx.de>
34440 Date: Wed Jan 30 15:35:50 2008 +0100
34442 ppc4xx: Fix GPIO configuration for pcs440ep
34444 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
34445 49-63 for GPIO. They have been configured as trace signals. This patch
34446 fixes this by clearing the corresponding bit.
34448 Signed-off-by: Stefan Roese <sr@denx.de>
34450 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
34451 Author: Stefan Roese <sr@denx.de>
34452 Date: Wed Jan 30 14:48:28 2008 +0100
34454 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
34456 Signed-off-by: Stefan Roese <sr@denx.de>
34458 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
34459 Author: Ladislav Michl <ladis@linux-mips.org>
34460 Date: Fri Dec 7 00:42:32 2007 +0100
34462 ARM: Board voiceblue update
34464 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
34466 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
34467 Author: Ladislav Michl <ladis@linux-mips.org>
34468 Date: Thu Dec 6 23:24:57 2007 +0100
34470 ARM: AT91RM9200 based boards config cleanup
34472 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
34474 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
34477 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
34478 Author: Ladislav Michl <ladis@linux-mips.org>
34479 Date: Thu Dec 6 22:59:16 2007 +0100
34481 ARM: Fix at91rm9200dk base address
34483 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
34484 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
34485 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
34486 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
34487 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
34488 I'm sending this patch 4th (!) time in hope it produces at least some
34491 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
34493 Fix at91rm9200dk base and environment address.
34495 commit c95219fae2a7add7daa2f91aedca65b1698465c7
34496 Author: stefano babic <sbabic@denx.de>
34497 Date: Tue Nov 20 10:40:24 2007 +0100
34499 MMC for PXA 27X (resubmit)
34501 MMC support for X_Scale PXA is broken and does not work.
34502 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
34503 There were already some patches around the world but none of them was
34504 merged into the official u-boot tree.
34506 This patch makes order fixing this issue. Resubmit after code cleanup.
34508 Applied and tested on PXA 270 (TrizepsIV module).
34510 Signed-off-by: Stefano Babic <sbabic@denx.de>
34512 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
34513 Author: stefano babic <sbabic@denx.de>
34514 Date: Tue Nov 20 10:37:04 2007 +0100
34516 Fix gcc issues in pxa-regs.h
34518 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
34519 issues generates wrong code.
34520 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
34521 This patch fixes the problem and solves the gcc-4 issues as the linux
34524 Signed-off-by: Stefano Babic <sbabic@denx.de>
34525 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
34527 commit 7047b388876e7b905b2ec4edb8010543e3641b85
34528 Author: Jens Gehrlein <sew_s@tqs.de>
34529 Date: Tue Jan 29 08:45:03 2008 +0100
34531 TQM834x: enable DHCP
34533 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
34534 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34536 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
34537 Author: Jens Gehrlein <sew_s@tqs.de>
34538 Date: Tue Jan 29 08:45:02 2008 +0100
34540 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
34542 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
34543 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34545 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
34546 Author: Ben Warren <biggerbadderben@gmail.com>
34547 Date: Sat Jan 26 23:41:19 2008 -0500
34549 Fix conditional compilation of mpx8xxx_spi driver
34551 This driver should only compile if CONFIG_MPC8XXX_SPI is set
34553 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
34554 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34556 commit 63f732d3d3880feb531f48af247c025bf01462b0
34557 Author: Rafal Jaworowski <raj@semihalf.com>
34558 Date: Tue Jan 29 17:00:34 2008 +0100
34560 API: Provide dummy halt() in the glue layer.
34562 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
34564 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34566 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
34567 Author: Rafal Jaworowski <raj@semihalf.com>
34568 Date: Tue Jan 29 16:57:38 2008 +0100
34570 API: Convert conditional building to the new scheme.
34572 This fixes a build breakage with CONFIG_API enabled, which appeared after
34573 the recent changes in the U-Boot build system.
34575 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34577 commit 98b742489c09780be6a832eeaa4e5eff824792bb
34578 Author: Wolfgang Denk <wd@denx.de>
34579 Date: Fri Jan 25 09:56:17 2008 +0100
34581 inka4x0: remove dead code
34583 Signed-off-by: Wolfgang Denk <wd@denx.de>
34585 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
34586 Author: Becky Bruce <becky.bruce@freescale.com>
34587 Date: Wed Jan 23 16:31:06 2008 -0600
34589 86xx: Add reginfo command
34591 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34593 commit ddcebcb638715a6278da93b553d5016f99823816
34594 Author: Becky Bruce <becky.bruce@freescale.com>
34595 Date: Wed Jan 23 16:31:05 2008 -0600
34597 86xx: Add print_laws function to fsl_law.c
34599 This can be used for debug, and will be used by board code
34600 to help implement reginfo.
34602 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34604 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
34605 Author: Becky Bruce <becky.bruce@freescale.com>
34606 Date: Wed Jan 23 16:31:04 2008 -0600
34608 86xx: Remove old-style law setup code
34610 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
34612 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34614 commit 713d8186649dae874613d495b0cecaa039a98b30
34615 Author: Becky Bruce <becky.bruce@freescale.com>
34616 Date: Wed Jan 23 16:31:03 2008 -0600
34618 86xx: Convert sbc8641d to use new law setup code.
34620 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34622 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
34623 Author: Becky Bruce <becky.bruce@freescale.com>
34624 Date: Wed Jan 23 16:31:02 2008 -0600
34626 86xx: Convert mpc8610hpcd to new law setup method.
34628 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34630 commit 4933b91f8a49e436681f163df3173beb91cac44a
34631 Author: Becky Bruce <becky.bruce@freescale.com>
34632 Date: Wed Jan 23 16:31:01 2008 -0600
34634 86xx: Support new law setup method and convert mpc8641
34636 Adds the support code in cpu/mpc86xx for the new law setup code
34637 recently created fsl_law.c, and changes the MPC8641HPCN config
34640 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34642 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
34643 Author: Becky Bruce <becky.bruce@freescale.com>
34644 Date: Wed Jan 23 16:31:00 2008 -0600
34646 86xx: Rearrange the sequence in start.S
34648 * split the BAT initialization so that only 2 BATs (for the boot page
34649 and stack) are programmed very early on. The rest are initialized later.
34650 * Move other BAT setup, ccsrbar setup, and law setup later in the code
34651 after translation has been enabled.
34653 These changes will facilitate the moving of law and BAT initialization
34654 to C code, and will aid with 36-bit physical addressing support.
34656 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
34658 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
34659 Author: Wolfgang Denk <wd@denx.de>
34660 Date: Wed Jan 23 14:41:37 2008 +0100
34662 Coding Style Cleanup; update CHANGELOG
34664 Signed-off-by: Wolfgang Denk <wd@denx.de>
34666 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
34667 Author: Wolfgang Denk <wd@denx.de>
34668 Date: Wed Jan 23 14:31:17 2008 +0100
34670 Coding Style Cleanup; update CHANGELOG
34672 Signed-off-by: Wolfgang Denk <wd@denx.de>
34674 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
34675 Author: Dave Liu <r63238@freescale.com>
34676 Date: Fri Jan 18 10:07:04 2008 +0800
34678 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
34680 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
34681 cause the 83xx immap broken, so the DMA and PCI will
34684 The patch fix the struct spi8xxx and rm struct spi83xx.
34686 Signed-off-by: Dave Liu <daveliu@freescale.com>
34687 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34689 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
34690 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34691 Date: Sat Apr 14 17:11:49 2007 +0200
34693 AVR32: ATNGW100 board support
34695 Add support for the ATNGW100 Network Gateway reference design,
34696 including flash, ethernet and MMC support.
34698 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34700 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
34701 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34702 Date: Sat Nov 24 18:15:31 2007 +0100
34704 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
34706 I don't know why the relevant layers can't do this by itself, but this
34709 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34711 commit 799891ef7b1b3432032ec23466df6b665a797fa4
34712 Author: Michael Schwingen <michael@schwingen.org>
34713 Date: Fri Jan 18 00:04:28 2008 +0100
34715 Add AcTux board support
34719 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
34721 contain changes for multiple boards, the board-specific files follow as
34724 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34726 commit 66a4344a4d910a11125df7768899ad529719855e
34727 Author: Michael Schwingen <michael@schwingen.org>
34728 Date: Wed Jan 16 19:53:23 2008 +0100
34730 add AcTux-4 board support
34732 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34734 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
34735 Author: Michael Schwingen <michael@schwingen.org>
34736 Date: Wed Jan 16 19:51:55 2008 +0100
34738 add AcTux-3 board support
34740 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34742 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
34743 Author: Michael Schwingen <michael@schwingen.org>
34744 Date: Wed Jan 16 19:51:14 2008 +0100
34746 add AcTux-2 board support
34748 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34750 commit ea99e8f05b7240fd657739e286664664ae160abe
34751 Author: Michael Schwingen <michael@schwingen.org>
34752 Date: Wed Jan 16 19:50:37 2008 +0100
34754 add AcTux-1 board support
34756 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34758 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
34759 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34760 Date: Mon Jan 14 19:20:08 2008 +0100
34762 ARM: remove useless function board_post_init
34764 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34766 commit 96bd462942022e4569b582c072a0ed26de1cd19b
34767 Author: Michael Schwingen <michael@schwingen.org>
34768 Date: Thu Jan 10 14:59:46 2008 +0100
34772 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
34773 No handshaking is done, but the active RTS signal allows to
34774 connect to the target using a PC which is using RTS/CTS
34775 handshake, and does no harm if the PC is set to ignore RTS.
34777 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34779 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
34780 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34781 Date: Mon Jan 7 08:41:34 2008 +0100
34783 IXP: add dynamic microcode addr
34785 allow to load the microde from flash or ram by download it through
34786 the serial or other.
34788 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34789 Acked-by: Stefan Roese <sr@denx.de>
34791 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
34792 Author: Michael Schwingen <michael@schwingen.org>
34793 Date: Sat Nov 10 15:44:12 2007 +0100
34795 load ixp42x NPE firmware from separate flash block, remove dead code
34799 the following patch adds support to move the IXP42X NPE firmware to a
34800 separate flash block, whose start address is defined in
34801 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
34802 NPE-enabled u-boot without copyright problems due to the NPE firmware.
34804 I hope the patch applies, I get whitespace-related differences in the NPE
34805 files due to trailing whitespace in the original versions.
34807 Signed-off-by: Michael Schwingen <michael@schwingen.org>
34808 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34810 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
34811 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34812 Date: Tue Jan 15 14:15:46 2008 -0600
34814 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
34816 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34817 Signed-off by: John Rigby <jrigby@freescale.com>
34819 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
34820 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34821 Date: Tue Jan 15 14:02:49 2008 -0600
34823 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
34825 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34826 Signed-off by: John Rigby <jrigby@freescale.com>
34828 commit 777d1abd9796f1c2e148417cc10657e847d318ce
34829 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34830 Date: Tue Jan 15 14:00:25 2008 -0600
34832 ColdFire: Add MCF547x_8x FEC driver
34834 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34835 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
34836 Signed-off by: John Rigby <jrigby@freescale.com>
34838 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
34839 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34840 Date: Tue Jan 15 13:54:09 2008 -0600
34842 ColdFire: Add MCF547x_8x dma code and header files
34844 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34845 Signed-off by: John Rigby <jrigby@freescale.com>
34847 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
34848 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34849 Date: Tue Jan 15 13:52:03 2008 -0600
34851 ColdFire: Add MCF547x_8x dma code - 2
34853 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34854 Signed-off by: John Rigby <jrigby@freescale.com>
34856 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
34857 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34858 Date: Tue Jan 15 13:48:52 2008 -0600
34860 ColdFire: Add MCF547x_8x dma code - 1
34862 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34863 Signed-off by: John Rigby <jrigby@freescale.com>
34865 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
34866 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34867 Date: Tue Jan 15 13:39:44 2008 -0600
34869 ColdFire: Add MCF547x_8x related header files
34871 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34872 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
34873 Signed-off by: John Rigby <jrigby@freescale.com>
34875 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
34876 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34877 Date: Tue Jan 15 13:37:34 2008 -0600
34879 ColdFire: Add MCF547x_8x cpu arch
34881 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34882 Signed-off by: John Rigby <jrigby@freescale.com>
34884 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
34885 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34886 Date: Mon Jan 14 17:47:23 2008 -0600
34888 ColdFire: Add MCF5227x cpu and M52277EVB support-3
34890 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34891 Signed-off by: John Rigby <jrigby@freescale.com>
34893 commit c87581027994c148131b2f11aa75501f782ec19a
34894 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34895 Date: Mon Jan 14 17:46:19 2008 -0600
34897 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
34899 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34900 Signed-off by: John Rigby <jrigby@freescale.com>
34902 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
34903 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34904 Date: Mon Jan 14 17:43:33 2008 -0600
34906 ColdFire: Add MCF5227x cpu and M52277EVB support-1
34908 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34909 Signed-off by: John Rigby <jrigby@freescale.com>
34911 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
34912 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34913 Date: Mon Jan 14 17:35:44 2008 -0600
34915 ColdFire: Fix CFI Flash low level Read/Write macro
34917 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34918 Signed-off by: John Rigby <jrigby@freescale.com>
34920 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
34921 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34922 Date: Mon Jan 14 17:23:08 2008 -0600
34924 ColdFire: Add M5373EVB platform support - 2
34926 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34927 Signed-off by: John Rigby <jrigby@freescale.com>
34929 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
34930 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34931 Date: Mon Jan 14 17:19:54 2008 -0600
34933 ColdFire: Add M5373EVB platform support - 1
34935 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34936 Signed-off by: John Rigby <jrigby@freescale.com>
34938 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
34939 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34940 Date: Mon Jan 14 17:17:03 2008 -0600
34942 ColdFire: Update FlexBus CS for MCF532x
34944 Definition update and change from 16bit to 32bit
34946 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34947 Signed-off by: John Rigby <jrigby@freescale.com>
34949 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
34950 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34951 Date: Mon Jan 14 17:11:47 2008 -0600
34953 ColdFire: PCI and misc updates for MCF5445x
34955 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34956 Signed-off by: John Rigby <jrigby@freescale.com>
34958 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
34959 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34960 Date: Mon Jan 14 17:06:55 2008 -0600
34962 ColdFire: MCF5445x header files cleanup
34964 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34965 Signed-off by: John Rigby <jrigby@freescale.com>
34967 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
34968 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34969 Date: Mon Jan 14 16:59:42 2008 -0600
34971 ColdFire: MCF532x header files cleanup
34973 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34974 Signed-off by: John Rigby <jrigby@freescale.com>
34976 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
34977 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34978 Date: Mon Jan 14 15:30:15 2008 -0600
34980 ColdFire: Add modules header files
34982 Add CF specific modules header files
34984 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
34985 Signed-off-by: John Rigby <jrigby@freescale.com>
34987 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
34988 Author: Kim Phillips <kim.phillips@freescale.com>
34989 Date: Thu Jan 17 12:48:00 2008 -0600
34991 codingstyle cleanup for spi driver
34993 ..and rm unused CONFIG_FSL_SPI define
34995 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34997 commit d59feffb42c9f174116db7a82a311df98983dfce
34998 Author: Haiying Wang <Haiying.Wang@freescale.com>
34999 Date: Wed Jan 16 17:12:12 2008 -0500
35001 FSL: Fix common EEPROM_data structure definition
35003 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
35004 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
35007 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
35009 commit 6bee764bd6da510a4aad614880300c968bc7318d
35010 Author: Timur Tabi <timur@freescale.com>
35011 Date: Wed Jan 16 15:48:12 2008 -0600
35013 86xx: enable command-line editing
35015 Enable command-line editing for all MPC86xx boards.
35017 Signed-off-by: Timur Tabi <timur@freescale.com>
35019 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
35020 Author: Ben Warren <biggerbadderben@gmail.com>
35021 Date: Wed Jan 16 22:37:42 2008 -0500
35023 Implement hard SPI driver on MPC8349EMDS
35025 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
35026 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
35028 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35029 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35031 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
35032 Author: Ben Warren <biggerbadderben@gmail.com>
35033 Date: Wed Jan 16 22:37:35 2008 -0500
35035 Add support for a Freescale non-CPM SPI controller
35037 This patch adds support for the SPI controller found on Freescale PowerPC
35038 processors such as the MCP834x family. Additionally, a new config option,
35039 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
35041 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35042 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35044 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
35045 Author: Dave Liu <r63238@freescale.com>
35046 Date: Thu Jan 17 18:23:19 2008 +0800
35048 mpc83xx: Fix the fatal conflict of merge
35050 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
35051 will cause the mpc8315erdb board can't boot up.
35053 The patch fix that bug, and remove the duplicated #ifdef
35054 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
35055 MPC8313E processor.
35057 Signed-off-by: Dave Liu <daveliu@freescale.com>
35058 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35060 commit 3259eeaa4148125a81417477f62c05bd67f60587
35061 Author: Larry Johnson <lrj@acm.org>
35062 Date: Thu Jan 17 08:50:09 2008 -0500
35064 Merge Sequoia beautification into Korat code
35066 Signed-off-by: Larry Johnson <lrj@acm.org>
35068 commit e16925773211291b562e77187061e9dd1d757217
35069 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35070 Date: Thu Jan 17 07:45:05 2008 +0100
35072 net: add 'ethrotate' environment variable
35074 [PATCH] net: add 'ethrotate' environment variable
35076 This patch replaces the buildtime configuration option
35077 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
35078 configuration veriable. See README.
35080 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35081 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35083 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
35084 Author: Stefan Roese <sr@denx.de>
35085 Date: Thu Jan 17 14:29:04 2008 +0100
35087 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
35089 Signed-off-by: Stefan Roese <sr@denx.de>
35091 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
35092 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35093 Date: Thu Jan 17 18:07:32 2008 +0900
35095 sh: Remove CONFIG_COMMANDS from MS7720SE config file
35097 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35099 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
35100 Author: Niklaus Giger <niklaus.giger@netstal.com>
35101 Date: Wed Jan 16 18:39:20 2008 +0100
35103 ppc4xx: Netstal HCU4 board: added various fixes and POST
35105 - Moved some common code to netstal/common/nm_bsp.c.
35106 - sdram initialisation goes go netstal/common/fixed_sdram.c.
35107 - Added support for POST.
35108 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
35110 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35112 commit 69b0634a4ee98c9791815600d43b99f626a952f3
35113 Author: Niklaus Giger <niklaus.giger@netstal.com>
35114 Date: Thu Jan 17 12:53:56 2008 +0100
35116 ppc4xx: netstal/common define routines used by all boards
35118 Added some routines used by all Netstal boards:
35119 - nm_bsp.c: - nm_show_print and
35120 - common_misc_init_r
35121 - set_params_for_sw_install. Very specific code to handle our SW
35122 installation procedure
35123 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
35124 to handle sdram initialization.
35125 - nm.h: Common header
35127 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35129 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
35130 Author: Niklaus Giger <niklaus.giger@netstal.com>
35131 Date: Wed Jan 16 18:39:18 2008 +0100
35133 ppc4xx: Netstal HCU5 board: added various fixes and POST
35135 - Moved some common code to nestal/common/nm_bsp.c.
35136 - Added support for the vxWorks EDR.
35137 - Enable trace for Lauterbach, if present.
35138 - Added support for POST.
35139 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
35141 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35143 commit 4371090e5da77edc7bf9f296364db4801639d9c4
35144 Author: Niklaus Giger <niklaus.giger@netstal.com>
35145 Date: Wed Jan 16 18:39:08 2008 +0100
35147 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
35150 - Reduced rom_size from 384 to 320 kB
35151 - Environment is now in flash
35155 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35157 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
35158 Author: Niklaus Giger <niklaus.giger@netstal.com>
35159 Date: Wed Jan 16 18:37:50 2008 +0100
35161 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
35164 - Reduced rom_size from 384 to 320 kB
35165 - Environment is now in flash
35169 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35171 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
35172 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35173 Date: Thu Jan 17 10:53:08 2008 +0100
35175 ppc4xx: Complete DU440 board support
35177 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35179 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
35180 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35181 Date: Thu Jan 17 10:52:30 2008 +0100
35183 ppc4xx: Add DU440 board support
35185 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35187 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
35188 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35189 Date: Thu Jan 17 15:53:52 2008 +0900
35191 sh: Update SuperH SCIF driver
35193 This patch fixed wrong SH7720 CPU macro and changed macro that
35194 calculated value of SCBRR register.
35196 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35198 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
35199 Author: Grzegorz Bernacki <gjb@semihalf.com>
35200 Date: Wed Jan 16 15:12:47 2008 +0100
35202 Set ips dividor to 1/4 of csb clock.
35204 Previous setting cause ips clock to be out of spec. This bug was found by John
35205 Rigby from Freescale.
35207 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
35209 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
35210 Author: Kumar Gala <galak@kernel.crashing.org>
35211 Date: Thu Jan 17 02:19:18 2008 -0600
35213 85xx: Get ride of old TLB setup code
35215 Now that all boards have been converted, remove old config code and the
35216 config option for the new style.
35218 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35220 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
35221 Author: Kumar Gala <galak@kernel.crashing.org>
35222 Date: Thu Jan 17 02:02:10 2008 -0600
35224 85xx: Convert TQM85xx to new TLB setup
35226 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35228 commit 74121b470c14f7eaf284ee838bffca6f9521069e
35229 Author: Kumar Gala <galak@kernel.crashing.org>
35230 Date: Thu Jan 17 01:56:32 2008 -0600
35232 85xx: Convert STXGP3 & STXSSA to new TLB setup
35234 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35236 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
35237 Author: Kumar Gala <galak@kernel.crashing.org>
35238 Date: Thu Jan 17 01:44:34 2008 -0600
35240 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
35242 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35244 commit 818218bac6a11591e2542c344d2330e0f4e1968b
35245 Author: Kumar Gala <galak@kernel.crashing.org>
35246 Date: Thu Jan 17 01:31:34 2008 -0600
35248 85xx: Convert PM854/PM856 to new TLB setup
35250 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35252 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
35253 Author: Kumar Gala <galak@kernel.crashing.org>
35254 Date: Thu Jan 17 01:25:33 2008 -0600
35256 85xx: Convert MPC8540EVAL to new TLB setup
35258 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35260 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
35261 Author: Kumar Gala <galak@kernel.crashing.org>
35262 Date: Thu Jan 17 01:12:22 2008 -0600
35264 85xx: Convert MPC8568 MDS to new TLB setup
35266 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35268 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
35269 Author: Kumar Gala <galak@kernel.crashing.org>
35270 Date: Thu Jan 17 01:01:09 2008 -0600
35272 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
35274 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35276 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
35277 Author: Kumar Gala <galak@kernel.crashing.org>
35278 Date: Thu Jan 17 00:52:29 2008 -0600
35280 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
35282 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35284 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
35285 Author: Kumar Gala <galak@kernel.crashing.org>
35286 Date: Thu Jan 17 00:32:17 2008 -0600
35288 85xx: Convert ATUM8548 to new TLB setup
35290 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35292 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
35293 Author: Kumar Gala <galak@kernel.crashing.org>
35294 Date: Wed Jan 16 23:11:57 2008 -0600
35296 85xx: Convert MPC8544 DS to new TLB setup
35298 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35300 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
35301 Author: Kumar Gala <galak@kernel.crashing.org>
35302 Date: Wed Jan 16 22:38:34 2008 -0600
35304 85xx: Reworked initial processor init
35306 Reworked the initial processor initialzation sequence:
35307 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
35308 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
35309 * Reworked initial asm code to do most of the core init before TLBs
35311 The main reasons for these changes are to allow handling of 36-bit phys
35312 addresses in the future and some of the issues that will exist when we
35315 There are a few caveats on what can be initialized via the LAW and TLB
35317 * TLB entry 14/15 can't be initialized via the TLB table
35318 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
35319 the code that is currently executing.
35321 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35323 commit 44a23cfd6360a68eaa41f945190618a55519eac3
35324 Author: Kumar Gala <galak@kernel.crashing.org>
35325 Date: Wed Jan 16 22:33:22 2008 -0600
35327 85xx: Introduce new tlb API
35329 Add a set of functions to manipulate TLB entries:
35330 * set_tlb() - write a tlb entry
35331 * invalidate_tlb() - invalidate a tlb array
35332 * disable_tlb() - disable a variable size tlb entry
35333 * init_tlbs() - setup initial tlbs based on static table
35335 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35337 commit be88b1699863c262818f3af7f60173b4d48df8fc
35338 Author: Stefan Roese <sr@denx.de>
35339 Date: Thu Jan 17 07:50:17 2008 +0100
35341 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
35343 Signed-off-by: Stefan Roese <sr@denx.de>
35345 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
35346 Author: Kumar Gala <galak@kernel.crashing.org>
35347 Date: Wed Jan 16 10:04:42 2008 -0600
35349 85xx: Use proper defines for PCI addresses
35351 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
35352 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
35353 be used for configuring the PCI ATMU.
35355 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35357 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
35358 Author: Kumar Gala <galak@kernel.crashing.org>
35359 Date: Wed Jan 16 09:22:29 2008 -0600
35361 85xx: Remove old style of LAW init
35363 All boards are now using the new fsl_law code so we can drop the old version.
35365 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35367 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
35368 Author: Kumar Gala <galak@kernel.crashing.org>
35369 Date: Wed Jan 16 09:15:29 2008 -0600
35371 85xx: convert remaining 85xx boards over to use new LAW init code
35373 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
35374 to use new LAW init code.
35376 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35378 commit 572b13afc42710f2957c382a710360429c0e099b
35379 Author: Kumar Gala <galak@kernel.crashing.org>
35380 Date: Wed Jan 16 09:11:53 2008 -0600
35382 85xx: convert STXGP3/STXSSA over to use new LAW init code
35384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35386 commit 45f2166ac0233a9263058378f39612bd11f61196
35387 Author: Kumar Gala <galak@kernel.crashing.org>
35388 Date: Wed Jan 16 09:06:48 2008 -0600
35390 85xx: convert PM854/PM856 over to use new LAW init code
35392 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35394 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
35395 Author: Kumar Gala <galak@kernel.crashing.org>
35396 Date: Wed Jan 16 09:05:27 2008 -0600
35398 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
35400 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35402 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
35403 Author: Kumar Gala <galak@kernel.crashing.org>
35404 Date: Wed Jan 16 01:45:10 2008 -0600
35406 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
35408 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35410 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
35411 Author: Kumar Gala <galak@kernel.crashing.org>
35412 Date: Wed Jan 16 01:32:06 2008 -0600
35414 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
35416 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35418 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
35419 Author: Kumar Gala <galak@kernel.crashing.org>
35420 Date: Wed Jan 16 01:16:16 2008 -0600
35422 85xx: convert MPC8544 DS over to use new LAW init code
35424 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35426 commit 83d40dfd79fe868796275802f60116d84b9e4395
35427 Author: Kumar Gala <galak@kernel.crashing.org>
35428 Date: Wed Jan 16 01:13:58 2008 -0600
35430 85xx: Move LAW init code into C
35432 Move the initialization of the LAWs into C code and provide an API
35433 to allow modification of LAWs after init.
35435 Board code is responsible to provide a law_table and num_law_entries.
35437 We should be able to use the same code on 86xx as well.
35439 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35441 commit bed8ce838a609aaab136d43b25e6df2a520bc854
35442 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35443 Date: Sat Dec 22 15:03:12 2007 +0100
35445 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
35447 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35449 commit 0764c164fed6277d359cf132d55187ea34290114
35450 Author: Vlad Lungu <vlad@comsys.ro>
35451 Date: Wed Jan 16 19:27:51 2008 +0200
35453 MIPS:Target support for qemu -M mips
35455 With serial, NE2000, IDE support. Tested in big-endian mode.
35456 Memory size hard-coded to 128M for now, so don't play with
35459 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
35461 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
35462 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35463 Date: Fri Jan 11 00:01:37 2008 +0100
35465 Fix nfs command help to reflect that the serverip is optional
35467 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35468 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35470 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
35471 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35472 Date: Mon Dec 10 22:32:14 2007 +0100
35474 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
35476 and move is_valid_ether_addr board file
35478 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35479 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35481 commit c2f896b8fc4722e36915903e1942e138e68ce804
35482 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35483 Date: Wed Jan 16 16:13:31 2008 +0900
35485 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
35487 rx_status on the memory is basically in LE, but needs to be handled in CPU
35488 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
35491 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35492 Cc: Masami Komiya <mkomiya@sonare.it>
35493 Cc: Lucas Jin <lucasjin@gmail.com>
35494 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35496 commit 96a236746fe6a7b84802afb4ed31536696d34812
35497 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35498 Date: Wed Jan 16 16:12:26 2008 +0900
35500 drivers/net/rtl8139.c: Fix cache coherency issues
35502 Current driver is meant for cache coherent systems. This patch adds
35503 flush_cache() routines to support cache non-coherent systems.
35505 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35506 Cc: Masami Komiya <mkomiya@sonare.it>
35507 Cc: Lucas Jin <lucasjin@gmail.com>
35508 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35510 commit d1276c76c1e2b5035296689280ba1acb2c425104
35511 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35512 Date: Wed Jan 16 16:11:14 2008 +0900
35514 drivers/net/rtl8139.c: Fix tx timeout
35516 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
35517 does, the condition "(currticks() < to)" becomes invalid and immediately
35518 leads to tx timeout error. This patch introduces the fine-graded udely(10)
35519 loops to ease the impact of wrapping around.
35521 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35522 Cc: Masami Komiya <mkomiya@sonare.it>
35523 Cc: Lucas Jin <lucasjin@gmail.com>
35524 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35526 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
35527 Author: Dave Liu <r63238@freescale.com>
35528 Date: Fri Jan 11 18:45:28 2008 +0800
35530 TSEC: Add the support for RealTek RTL8211B PHY
35532 Add the support of RealTek RTL8211B PHY, the RTL8211B
35533 PHY only supports RGMII and MII mode.
35535 Signed-off-by: Dave Liu <daveliu@freescale.com>
35536 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35538 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
35539 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
35540 Date: Wed Jan 16 09:40:41 2008 +0100
35542 Remove annoying debug printout for PHY less boards.
35544 PHY less board prints out lots of "read wrong ...":
35545 read wrong value : mii_id 3,mii_reg 2, base e0102320
35546 read wrong value : mii_id 3,mii_reg 3, base e0102320
35547 UEC: PHY is Generic MII (ffffffff)
35548 read wrong value : mii_id 3,mii_reg 4, base e0102320
35549 read wrong value : mii_id 3,mii_reg 0, base e0102320
35550 read wrong value : mii_id 3,mii_reg 1, base e0102320
35551 read wrong value : mii_id 3,mii_reg 1, base e0102320
35552 read wrong value : mii_id 3,mii_reg 5, base e0102320
35553 read wrong value : mii_id 3,mii_reg 1, base e0102320
35554 read wrong value : mii_id 3,mii_reg 1, base e0102320
35555 read wrong value : mii_id 3,mii_reg 5, base e0102320
35556 FSL UEC0: Full Duplex
35557 FSL UEC0: Speed 100BT
35558 FSL UEC0: Link is up
35559 Using FSL UEC0 device
35561 Make this printout depend on UEC_VERBOSE_DEBUG and
35562 remove its definition in uec_phy.c
35564 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
35565 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35567 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
35568 Author: Kim Phillips <kim.phillips@freescale.com>
35569 Date: Tue Jan 15 14:11:00 2008 -0600
35571 net: reduce boot latency on QE UEC based boards
35573 actually polling for PHY autonegotiation to finish enables us to remove the
35574 5 second boot prompt latency present on QE based boards.
35576 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
35577 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
35578 code shamelessly stolen from tsec driver.
35580 also rm unused CONFIG_RMII_MODE code.
35582 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35583 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
35584 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35586 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
35587 Author: michael.firth@bt.com <michael.firth@bt.com>
35588 Date: Wed Jan 16 11:40:51 2008 +0000
35590 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
35592 The current TSEC driver limits MDIO access to the devices that have been configured as attached
35593 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
35595 Signed-off-by: Michael Firth <michael.firth@bt.com>
35596 Acked-by: Andy Fleming <afleming@freescale.com>
35597 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35599 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
35600 Author: Kim Phillips <kim.phillips@freescale.com>
35601 Date: Wed Jan 16 00:38:05 2008 -0600
35603 Add support for the MPC837xERDB
35605 MPC837xERDB board support includes:
35606 * DDR2 330MHz hardcoded (soldered on the board)
35607 * Local Bus NOR Flash
35608 * I2C, UART and RTC
35609 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
35610 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
35613 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
35614 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
35615 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35617 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
35618 Author: Kim Phillips <kim.phillips@freescale.com>
35619 Date: Wed Jan 16 12:06:16 2008 -0600
35621 mpc83xx: add support for more system clock performance controls
35623 System registers that are modified are the Arbiter Configuration
35624 Register (ACR), the System Priority Control Register (SPCR), and the
35625 System Clock Configuration Register (SCCR).
35627 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
35628 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
35629 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35631 commit 16c3cde050e2d243e62b37486f1558570787beb8
35632 Author: James Yang <james.yang@freescale.com>
35633 Date: Wed Jan 16 11:58:08 2008 -0600
35635 FSL: Generalize PIXIS reset command parsing.
35637 Before, the order of arguments to the pixis_reset
35638 command needed to be supplied in a hard-coded order.
35639 Generalize the command parsing to allow any order.
35641 Signed-off-by: James Yang <james.yang@freescale.com>
35642 Acked-by: Jon Loeliger <jdl@freescale.com>
35644 commit ad8f8687b78c3e917b173f038926695383c55555
35645 Author: Jon Loeliger <jdl@freescale.com>
35646 Date: Tue Jan 15 13:42:41 2008 -0600
35648 FSL: Convert board/freescale/common/Makefile to use CONFIG_
35650 Convert the board/freescale/common/Makefile to use
35651 CONFIG_* options to select which files to conditionally
35652 compile into the board/freescale/common library rather
35653 than conditionally compiling entire files.
35660 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
35662 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35664 commit 7c2221eb230372a9e537c4f6636b147b0909325f
35665 Author: Roy Zang <tie-fei.zang@freescale.com>
35666 Date: Tue Jan 15 16:38:38 2008 +0800
35668 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
35670 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
35671 Remove unused ethernet CONFIG_ options.
35673 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
35674 Acked-by: Jon Loeliger <jdl@freescale.com>
35676 commit 711a7946277d2e29af481011e8635e9975c54e45
35677 Author: Kim Phillips <kim.phillips@freescale.com>
35678 Date: Tue Jan 15 14:05:14 2008 -0600
35680 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
35682 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
35684 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35686 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
35687 Author: Kim Phillips <kim.phillips@freescale.com>
35688 Date: Tue Jan 15 09:51:12 2008 -0600
35690 mpc83xx: clean up mpc8360emds.c warnings
35692 mpc8360emds.c: In function 'ft_board_setup':
35693 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
35694 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
35695 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
35696 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
35697 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
35698 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
35700 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35702 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
35703 Author: Kim Phillips <kim.phillips@freescale.com>
35704 Date: Mon Jan 14 16:14:46 2008 -0600
35706 mpc83xx: fix phy-connection-type fixup code
35708 use tree passed to us in local blob, not global fdt.
35710 Also use fdt_path_offset to convert to relative offset, since absolute
35711 reference is needed to check for rgmii-id mode string value.
35713 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35715 commit 2b4c952be7c4357a13e839d48df80853820c33eb
35716 Author: Kumar Gala <galak@kernel.crashing.org>
35717 Date: Mon Jan 14 09:01:40 2008 -0600
35719 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
35721 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35722 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35724 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
35725 Author: Poonam Aggrwal <b10812@freescale.com>
35726 Date: Mon Jan 14 09:41:14 2008 +0530
35728 Changes in uboot DDR configuration for MPC8313eRDB
35730 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
35731 DDR configuration in u-boot code. Some are related to performance, some
35732 affect stability and some correct few basic errors in the current
35735 The changes have been tested and found to give better memory latency
35736 figures on MPC8313eRDB.LMBench figures prove it.
35740 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
35741 (this may improve performance for application with many read
35742 or write to open pages).
35743 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
35744 001 (activating all the CS when only one is used may cause
35745 unwanted noise on the system)
35747 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
35749 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
35751 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
35752 comply with the 3 ODT clk requirements)
35753 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
35754 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
35756 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
35757 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
35759 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
35760 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
35762 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
35763 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
35765 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
35766 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
35767 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
35768 Cc: Josep P J <PJ.Joseph@freescale.com>
35769 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35771 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
35772 Author: Jerry Van Baren <gvb.uboot@gmail.com>
35773 Date: Sat Jan 12 13:24:14 2008 -0500
35775 Enable the isdram command on the MPC8360EMDS board
35777 The isdram command prints out decoded information the "serial presence
35778 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
35779 debugging memory configuration problems.
35781 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
35782 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35784 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
35785 Author: Dave Liu <r63238@freescale.com>
35786 Date: Fri Jan 11 18:48:24 2008 +0800
35788 mpc83xx: Add the support for MPC8315ERDB board
35791 - Boot from NOR Flash
35792 - DDR2 266MHz hardcoded configuration
35793 - Local bus NOR Flash R/W operation
35794 - I2C, UART, MII and RTC
35798 Signed-off-by: Dave Liu <daveliu@freescale.com>
35799 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35801 commit b05884efa614e4d8a9413158fc228e0dc02ab704
35802 Author: Dave Liu <r63238@freescale.com>
35803 Date: Fri Jan 11 18:46:50 2008 +0800
35805 mpc83xx: Add config of eTSEC emergency priority in SPCR
35807 The TSEC emergency priority definition of 831x/837x
35808 is different than the definition of 834x in SPCR register.
35810 Add the other config of TSEC emergency priority into
35813 Signed-off-by: Dave Liu <daveliu@freescale.com>
35814 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35816 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
35817 Author: Dave Liu <r63238@freescale.com>
35818 Date: Fri Jan 11 18:42:19 2008 +0800
35820 mpc83xx: Remove cache config from MPC8360ERDK.h
35822 The MPC8360ERDK board support patch is added before
35823 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
35824 so, miss clean up it.
35826 The patch clean up the miss cache config.
35828 Signed-off-by: Dave Liu <daveliu@freescale.com>
35829 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35831 commit cd9d23053d435c08fc8695017b5cb9003fcda786
35832 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
35833 Date: Mon Jan 14 23:09:32 2008 +0300
35835 nand: FSL UPM NAND driver
35837 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
35839 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
35840 Author: Kyungmin Park <kmpark@infradead.org>
35841 Date: Tue Jan 15 08:59:44 2008 +0900
35843 OneNAND: Separate U-Boot dependent code from OneNAND
35845 OneNAND: Separate U-Boot dependent code from OneNAND
35847 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
35849 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
35850 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35851 Date: Wed Jan 16 10:33:46 2008 +0100
35853 ppc4xx: Sequoia coding style cleanup and beautification
35855 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35857 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
35858 Author: Larry Johnson <lrj@acm.org>
35859 Date: Tue Jan 15 14:35:58 2008 -0500
35861 ppc4xx: Refactor ECC POST for AMCC Denali core
35863 The ECC POST reported intermittent failures running after power-up on
35864 the Korat PPC440EPx board. Even when the test passed, the debugging
35865 output occasionally reported additional unexpected ECC errors.
35867 This refactoring has three main objectives: (1) minimize the code
35868 executed with ECC enabled during the tests, (2) add more checking of the
35869 results so any unexpected ECC errors would cause the test to fail, and
35870 (3) use synchronization (only) where required by the processor.
35872 Signed-off-by: Larry Johnson <lrj@acm.org>
35874 commit 2465665b73ac2f688af945b1ed510752afa816a4
35875 Author: David Saada <David.Saada@ecitele.com>
35876 Date: Tue Jan 15 10:40:24 2008 +0200
35878 QE UEC: Extend number of supported UECs to 4
35880 This patch extends the number of supported UECs to 4. Note that the
35881 problem of QE thread resources exhaustion is resolved by setting the
35882 correct number of QE threads according to Ethernet type (GBE or FE).
35884 Signed-off-by: David Saada <david.saada@ecitele.com>
35885 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
35887 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
35888 Author: Wolfgang Denk <wd@denx.de>
35889 Date: Wed Jan 16 00:01:01 2008 +0100
35891 LWMON5: enable hush shell as command line parser
35893 Signed-off-by: Wolfgang Denk <wd@denx.de>
35895 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
35896 Author: Wolfgang Denk <wd@denx.de>
35897 Date: Tue Jan 15 17:22:28 2008 +0100
35899 ADS5121: disable watchdog; enable image timestamps
35901 Signed-off-by: Wolfgang Denk <wd@denx.de>
35903 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
35904 Author: Wolfgang Denk <wd@denx.de>
35905 Date: Tue Jan 15 17:21:28 2008 +0100
35907 TK885D: fixes for bigger flash sector sizes on new modules;
35908 adjust default environment;
35909 disable SCC ethernet (not used on this board).
35911 Signed-off-by: Wolfgang Denk <wd@denx.de>
35913 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
35914 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35915 Date: Tue Jan 15 17:48:13 2008 +0900
35917 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
35919 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35921 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
35922 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35923 Date: Tue Jan 15 23:25:25 2008 +0900
35925 sh: Add support SH7710/SH7712
35927 SH7710/SH7712 of SH3 CPU are supported.
35928 SH771X is called SH-Ether, and has the Ether controller in CPU.
35929 The driver of Ether is not included in this patch.
35931 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35933 commit 63a11be68306870e04d3851ed9fa41955cdf4894
35934 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35935 Date: Tue Jan 15 23:06:17 2008 +0900
35937 sh: Add support of map_physmem() and unmap_physmem() to SuperH
35939 This patch add the support of map_physmem() and unmap_physmem()
35940 used with Common Flash Interface(CFI) driver.
35942 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35944 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
35945 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35946 Date: Wed Jan 9 14:42:27 2008 +0900
35948 sh: Add maintainer of MS7720SE to the MAINTAINER file
35950 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35952 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
35953 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35954 Date: Wed Jan 9 14:39:58 2008 +0900
35956 sh: Fix board name in MS7720SE's config.mk
35958 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35960 commit c0a04d93734d768b39dbb72fb501b65614c8615d
35961 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35962 Date: Wed Jan 9 14:37:36 2008 +0900
35964 sh: Add MS7720SE to MAKEALL
35966 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35968 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
35969 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
35970 Date: Mon Dec 3 22:58:50 2007 +0900
35972 sh: Add support for MS7720RP02 board
35974 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
35975 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35976 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35978 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
35979 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
35980 Date: Wed Jan 9 14:30:02 2008 +0900
35982 sh: Add support for SH7720 in serial_sh driver.
35984 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
35985 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35986 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35988 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
35989 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
35990 Date: Mon Dec 3 22:58:45 2007 +0900
35992 sh: Add support SH3 and SH7720
35994 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
35995 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35996 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35998 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
35999 Author: Stefan Roese <sr@denx.de>
36000 Date: Tue Jan 15 10:11:02 2008 +0100
36002 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
36004 Signed-off-by: Stefan Roese <sr@denx.de>
36006 commit 17bef68097ab3692500a36fb31115bff7910aa99
36007 Author: Niklaus Giger <niklausgiger@gmx.ch>
36008 Date: Mon Jan 14 14:04:42 2008 +0100
36010 ppc_4xx: Fix post spr.c for PPC405
36012 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
36013 for PPC440 and derivates processor.
36015 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36017 commit 06c428bcd4413014b43236e77765022071424fa6
36018 Author: Dave Liu <r63238@freescale.com>
36019 Date: Mon Jan 14 11:12:01 2008 +0800
36021 QE: fix compile warning
36023 qe.c: In function 'qe_upload_firmware':
36024 qe.c:390: warning: pointer targets in passing argument 2
36025 uec.c: In function 'uec_initialize':
36026 uec.c:1236: warning: 'uec_info' may be used uninitialized
36028 Signed-off-by: Dave Liu <daveliu@freescale.com>
36030 commit a0dd99d51efa55fe023e19c97ead92683725eb11
36031 Author: Stefan Roese <sr@denx.de>
36032 Date: Mon Jan 14 10:05:05 2008 +0100
36034 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
36036 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
36037 to remove the USB PHY reset after powerup. The CPLD will keep the
36038 USB PHY in reset (active low) until the bit is set to 1 in
36039 board_early_init_f().
36041 Signed-off-by: Stefan Roese <sr@denx.de>
36043 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
36044 Author: Wolfgang Denk <wd@denx.de>
36045 Date: Sun Jan 13 23:26:45 2008 +0100
36047 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
36049 Signed-off-by: Wolfgang Denk <wd@denx.de>
36051 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
36052 Author: Wolfgang Denk <wd@denx.de>
36053 Date: Sun Jan 13 23:37:50 2008 +0100
36055 ADS5121: Fix typo in ads5121.c, adjust default environment
36057 Signed-off-by: Wolfgang Denk <wd@denx.de>
36059 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
36060 Author: John Rigby <jrigby@freescale.com>
36061 Date: Fri Aug 24 18:18:43 2007 -0600
36063 ADS5121: MAX slew rate for PATA pins
36065 Signed-off-by: John Rigby <jrigby@freescale.com>
36067 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
36068 Author: Wolfgang Denk <wd@denx.de>
36069 Date: Sun Jan 13 21:05:52 2008 +0100
36071 Fix Makefile dependency problem with parallel builds.
36073 Signed-off-by: Wolfgang Denk <wd@denx.de>
36075 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
36076 Author: Wolfgang Denk <wd@denx.de>
36077 Date: Sun Jan 13 19:51:39 2008 +0100
36079 MPC8544DS: fix board Makefile for silent build (with -s)
36081 Signed-off-by: Wolfgang Denk <wd@denx.de>
36083 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
36084 Author: Wolfgang Denk <wd@denx.de>
36085 Date: Sun Jan 13 16:44:08 2008 +0100
36087 PMC440 board: fix board Makefile for out-of-tree building
36089 Signed-off-by: Wolfgang Denk <wd@denx.de>
36091 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
36092 Author: Wolfgang Denk <wd@denx.de>
36093 Date: Sun Jan 13 16:07:44 2008 +0100
36095 Makalu: fix compile warning
36097 Signed-off-by: Wolfgang Denk <wd@denx.de>
36099 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
36100 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36101 Date: Sun Jan 13 12:36:12 2008 +0100
36103 cmd_nand : fix compiler warning.
36105 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36107 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
36108 Author: Michael Schwingen <rincewind@discworld.dascon.de>
36109 Date: Sat Jan 12 20:29:47 2008 +0100
36111 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
36113 Signed-off-by: Michael Schwingen <michael@schwingen.org>
36114 Acked-by: Stefan Roese <sr@denx.de>
36116 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
36117 Author: Wolfgang Denk <wd@denx.de>
36118 Date: Sun Jan 13 02:19:44 2008 +0100
36120 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
36122 Signed-off-by: Wolfgang Denk <wd@denx.de>
36124 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
36125 Author: Wolfgang Denk <wd@denx.de>
36126 Date: Sun Jan 13 02:19:13 2008 +0100
36128 MPC8xx FEC driver: fix compiler warning.
36130 Signed-off-by: Wolfgang Denk <wd@denx.de>
36132 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
36133 Author: Wolfgang Denk <wd@denx.de>
36134 Date: Sun Jan 13 00:59:21 2008 +0100
36136 Fix Makefile dependencies issues; allow silent build
36138 - get rid of "version" target whichdidn't really work
36139 - make autoconf.mk depend on version_autogenerated.h to make sure
36140 to rebuild files as needed
36141 - add XECHO macro to allow for silent build using "make -s"
36143 Signed-off-by: Wolfgang Denk <wd@denx.de>
36145 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
36146 Author: Wolfgang Denk <wd@denx.de>
36147 Date: Sun Jan 13 00:55:47 2008 +0100
36149 ADS5121e: fix compile warning
36151 Signed-off-by: Wolfgang Denk <wd@denx.de>
36153 commit f2b6f4610627fe3d607620e25082916a01538875
36154 Author: Wolfgang Denk <wd@denx.de>
36155 Date: Sun Jan 13 00:55:18 2008 +0100
36157 MUNICes: fix board Makefile for remote build directory
36159 Signed-off-by: Wolfgang Denk <wd@denx.de>
36161 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
36162 Author: Oliver Weber <almoeli@gmx.de>
36163 Date: Wed Jan 9 17:04:38 2008 +0100
36165 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
36167 Signed-off-by: Oliver Weber <almoeli@gmx.de>
36169 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
36170 Author: Andreas Engel <andreas.engel@ericsson.com>
36171 Date: Wed Jan 9 17:10:56 2008 +0100
36173 Make bootretry work when command line editing is enabled
36175 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
36176 This patch fixes the problem.
36178 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
36180 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
36181 Author: Larry Johnson <lrj@acm.org>
36182 Date: Fri Jan 11 23:26:18 2008 -0500
36184 Refactor code for "i2c sdram" command
36186 Signed-off-by: Larry Johnson <lrj@acm.org>
36188 commit 0df6b8446c4721b91ce311548114891130371083
36189 Author: Larry Johnson <lrj@acm.org>
36190 Date: Thu Jan 10 22:23:39 2008 -0500
36192 Fix "i2c sdram" command for DDR2 DIMMs
36194 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
36195 "i2c sdram" command. This patch provides correct alternative
36196 interpretations when DDR2 memory is detected.
36198 Signed-off-by: Larry Johnson <lrj@acm.org>
36200 commit 64134f011254123618798ff77c42ba196b2ec485
36201 Author: Wolfgang Denk <wd@denx.de>
36202 Date: Sat Jan 12 20:31:39 2008 +0100
36204 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
36206 With recent toolchain versions, some boards would not build because
36207 or errors like this one (here for ocotea board when building with
36209 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
36211 For many boards, the .bss section is big enough that it wraps around
36212 at the end of the address space (0xFFFFFFFF), so the problem will not
36213 be visible unless you use a 64 bit tool chain for development. On
36214 some boards however, changes to the code size (due to different
36215 optimizations) we bail out with section overlaps like above.
36217 The fix is to add the NOLOAD attribute to the .bss and .sbss
36218 sections, telling the linker that .bss does not consume any space in
36221 Signed-off-by: Wolfgang Denk <wd@denx.de>
36223 commit 3afac79ec27b91df185f090b31dad9620779f440
36224 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
36225 Date: Fri Jan 11 20:42:58 2008 -0600
36227 USB: Add Philips 1561 PCI-OHCI ids
36228 (needed for M5475EVB)
36230 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
36232 commit 5e8def6731cd7bec74bff42a16b139de04010353
36233 Author: Wolfgang Denk <wd@denx.de>
36234 Date: Sat Jan 12 15:51:34 2008 +0100
36236 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
36239 Signed-off-by: Heiko Schocher <hs@denx.de>
36240 Signed-off-by: Wolfgang Denk <wd@denx.de>
36242 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
36243 Author: Grzegorz Bernacki <gjb@semihalf.com>
36244 Date: Fri Jan 11 12:03:43 2008 +0100
36246 MPC512X: Cleanup bus clock names.
36248 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36250 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
36251 Author: Grzegorz Bernacki <gjb@semihalf.com>
36252 Date: Tue Jan 8 17:16:59 2008 +0100
36254 MPC512X: Fixed typo in macro name.
36256 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36258 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
36259 Author: Grzegorz Bernacki <gjb@semihalf.com>
36260 Date: Tue Jan 8 17:16:15 2008 +0100
36262 ads5121: Added support for FDT.
36264 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36266 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
36267 Author: Wolfgang Denk <wd@denx.de>
36268 Date: Sat Jan 12 01:05:50 2008 +0100
36270 Coding Style cleanup; update CHANGELOG.
36272 Signed-off-by: Wolfgang Denk <wd@denx.de>
36274 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
36275 Author: Heiko Schocher <hs@denx.de>
36276 Date: Fri Jan 11 15:15:17 2008 +0100
36278 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
36280 Signed-off-by: Timur Tabi <timur@freescale.com>
36281 Signed-off-by: Heiko Schocher <hs@denx.de>
36283 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
36284 Author: Heiko Schocher <hs@denx.de>
36285 Date: Fri Jan 11 15:15:16 2008 +0100
36287 MUNICes: Set the right CFG_DEFAULT_MBAR value.
36289 Signed-off-by: Heiko Schocher <hs@denx.de>
36291 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
36292 Author: Heiko Schocher <hs@denx.de>
36293 Date: Fri Jan 11 15:15:15 2008 +0100
36295 added the config File for the MUNICes board.
36297 Signed-off-by: Heiko Schocher <hs@denx.de>
36299 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
36300 Author: Heiko Schocher <hs@denx.de>
36301 Date: Fri Jan 11 15:15:14 2008 +0100
36303 added basic support for the MUNICes board.
36305 Signed-off-by: Heiko Schocher <hs@denx.de>
36307 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
36308 Author: Wolfgang Denk <wd@denx.de>
36309 Date: Sat Jan 12 00:39:37 2008 +0100
36311 Update CHANGELOG and MAINTAINERS files.
36313 Signed-off-by: Wolfgang Denk <wd@denx.de>
36315 commit 5ba7390c3cb579172be66888a371707b47b5be4e
36316 Author: Anatolij Gustschin <agust@denx.de>
36317 Date: Fri Jan 11 02:15:02 2008 +0100
36319 Fix compilation problem in common/cmd_bmp.c
36321 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
36322 isn't defined. This patch fix this.
36324 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36326 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
36327 Author: Heiko Schocher <hs@denx.de>
36328 Date: Fri Jan 11 01:12:09 2008 +0100
36330 Fix defaultconfig for the mgcoge board.
36332 Signed-off-by: Heiko Schocher <hs@denx.de>
36334 commit ac9db066b26935f31bff15c98168b19faeb603f3
36335 Author: Heiko Schocher <hs@denx.de>
36336 Date: Fri Jan 11 01:12:08 2008 +0100
36338 Added support for the mgcoge board from keymile.
36340 Signed-off-by: Heiko Schocher <hs@denx.de>
36342 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
36343 Author: Heiko Schocher <hs@denx.de>
36344 Date: Fri Jan 11 01:12:07 2008 +0100
36346 Enable SMC microcode relocation patch for SMC1.
36348 Signed-off-by: Heiko Schocher <hs@denx.de>
36350 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
36351 Author: Heiko Schocher <hs@denx.de>
36352 Date: Fri Jan 11 01:12:06 2008 +0100
36354 Added support for the mgsuvd board from keymile.
36356 Signed-off-by: Heiko Schocher <hs@denx.de>
36358 commit bf05293973b348f6946c9df92cd3c65ece42d0be
36359 Author: James Yang <james.yang@freescale.com>
36360 Date: Thu Jan 10 16:02:07 2008 -0600
36362 Fix 64-bit vsprintf.
36364 There were some size and unsigned problems.
36365 Also add support for "ll" size modifier in format string like glibc
36367 Signed-off-by: James Yang <James.Yang@freescale.com>
36368 Acked-by: Jon Loeliger <jdl@freescale.com>
36370 commit 92fa37eac530860643afa26ae347af3d23d67309
36371 Author: Larry Johnson <lrj@acm.org>
36372 Date: Wed Jan 9 12:42:35 2008 -0500
36374 Remove superfluous preprocessor conditionals from LM73 driver
36376 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
36378 (2) Use conditional Makefile.o.
36380 Signed-off-by: Larry Johnson <lrj@acm.org>
36382 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
36383 Author: Guennadi Liakhovetski <lg@denx.de>
36384 Date: Thu Jan 10 17:59:07 2008 +0100
36386 Add support for the TK885D baseboard from TELE-DATA
36388 The TK885D board uses a TQM885D module from TQ, this port adds an
36389 own configuration file and adds a last_stage_init() method to
36390 configure the two PHYs, depending on the phy_auto_nego environment
36393 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
36395 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
36396 Author: Kumar Gala <galak@kernel.crashing.org>
36397 Date: Thu Jan 10 02:22:05 2008 -0600
36399 Fix compiler warning
36401 main.c: In function 'readline_into_buffer':
36402 main.c:927: warning: unused variable 'p_buf'
36404 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36406 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
36407 Author: Anatolij Gustschin <agust@denx.de>
36408 Date: Fri Jan 11 14:30:01 2008 +0100
36410 Add Fujitsu CoralP/Lime video driver
36412 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36413 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
36415 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
36416 Author: Anatolij Gustschin <agust@denx.de>
36417 Date: Fri Jan 11 02:39:47 2008 +0100
36419 Fix video console newline and carriage return handling
36421 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
36422 are not displayed correctly. This is an attempt to fix
36423 this issue. Also add carriage return handling.
36425 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36426 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
36428 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
36429 Author: Stefan Roese <sr@denx.de>
36430 Date: Fri Jan 11 15:53:58 2008 +0100
36432 ppc4xx: Fix sdram init on Sequoia boards
36434 Clear possible errors in MCSR resulting from data-eye-search.
36435 If not done, then we could get an interrupt later on when
36436 exceptions are enabled.
36438 Signed-off-by: Stefan Roese <sr@denx.de>
36440 commit d610a60730b7464f6f659db49d264d89a7c71061
36441 Author: Anatolij Gustschin <agust@denx.de>
36442 Date: Fri Jan 11 15:31:09 2008 +0100
36444 ppc4xx: Rework Lime support for lwmon5
36446 Rework Lime support for lwmon5 using new video driver
36448 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36450 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
36451 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36452 Date: Fri Jan 11 14:55:16 2008 +0100
36454 ppc4xx: Update PMC440 config file
36456 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36458 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
36459 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36460 Date: Fri Jan 11 14:55:08 2008 +0100
36462 ppx4xx: Fix sdram init on PMC440 boards
36464 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36466 commit 061aad4d320dddce26247699dcf2875ee2ea1366
36467 Author: Dave Liu <r63238@freescale.com>
36468 Date: Thu Jan 10 23:09:33 2008 +0800
36470 mpc83xx: Fix the bug of 266MHz data rate DDR
36472 The DDR doesn't work on the 266MHz data rate,
36473 the patch fix the bug.
36475 Signed-off-by: Dave Liu <daveliu@freescale.com>
36476 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36478 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
36479 Author: Dave Liu <r63238@freescale.com>
36480 Date: Thu Jan 10 23:08:26 2008 +0800
36482 mpc83xx: Make the code more readable
36484 Format the code, make it more readable
36486 Signed-off-by: Dave Liu <daveliu@freescale.com>
36487 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36489 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
36490 Author: Dave Liu <r63238@freescale.com>
36491 Date: Thu Jan 10 23:07:23 2008 +0800
36493 mpc83xx: Reduce the latency of DDR
36495 Reduce the AL from 2 to 1 clock to improve the performance.
36497 Signed-off-by: Dave Liu <daveliu@freescale.com>
36498 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36500 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
36501 Author: Dave Liu <r63238@freescale.com>
36502 Date: Thu Jan 10 23:06:05 2008 +0800
36504 mpc83xx: Fix the wrong definition of MPC8315E
36506 According to the latest user manual of MPC8315E,
36507 1) The SVCOD of HRCWL is different than 837x
36508 2) The SCCR has changes
36510 Signed-off-by: Dave Liu <daveliu@freescale.com>
36511 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36513 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
36514 Author: Dave Liu <r63238@freescale.com>
36515 Date: Thu Jan 10 23:05:00 2008 +0800
36517 mpc83xx: Fix the typo in mpc83xx.h
36519 The SPCR about TSEC priority is wrong.
36521 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
36522 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
36523 Signed-off-by: Dave Liu <daveliu@freescale.com>
36524 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36526 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
36527 Author: Dave Liu <r63238@freescale.com>
36528 Date: Thu Jan 10 23:04:13 2008 +0800
36530 mpc83xx: Fix the typo in global data struct
36532 Fix the typo in global_data.h
36534 Signed-off-by: Dave Liu <daveliu@freescale.com>
36535 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36537 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
36538 Author: Dave Liu <r63238@freescale.com>
36539 Date: Thu Jan 10 23:03:03 2008 +0800
36541 mpc83xx: Remove cache config from config.h
36543 clean up the cache config from configs.h of board
36545 Signed-off-by: Dave Liu <daveliu@freescale.com>
36546 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36548 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
36549 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
36550 Date: Wed Jan 9 20:57:47 2008 +0300
36552 mpc83xx: add support for the MPC8360E-RDK
36554 This is MPC8360E based board with:
36555 - 256MB fixed SDRAM;
36556 - 8MB Intel Strata NOR flash;
36557 - StMICRO 64MiB NAND flash;
36558 - two 10/100/1000 ethernet ports connected via Broadcom
36560 - two 10/100 ethernet ports connected via National
36562 - one PCI and one miniPCI slots;
36563 - four serial ports (two NS16550-compatible, two UCCs);
36564 - four USB ports working through MPC8360E "FHCI" USB controller;
36565 - Fujitsu MB86277 graphics controller;
36566 - Analog to Digital Converter/Touchscreen controller, AD7843
36569 Features not supported in this patch are:
36570 - StMICRO 64MiB NAND flash (patch sent);
36571 - MINT framebuffer initialization (patch is pending);
36572 - Fetching production information from the EEPROM via I2C;
36574 - Two slow UCCs used as RS-485 UARTs.
36576 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
36577 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36579 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
36580 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
36581 Date: Wed Jan 9 20:57:40 2008 +0300
36583 mpc83xx: add "fsl, qe" compatible fixups
36585 New device trees will use "fsl,qe" compatible properties.
36587 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
36588 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36590 commit 977b57583a7c34010e566a09a679ec3c1836f996
36591 Author: Kim Phillips <kim.phillips@freescale.com>
36592 Date: Wed Jan 9 15:24:06 2008 -0600
36594 mpc83xx: add missing CONFIG_HAS_ETH0 defines
36596 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
36597 is defined; add the define to the missing board configs.
36599 Thanks to Emilian Medve for finding this.
36601 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36603 commit b830b7f1635984ba607219fcbd78597c28eeb529
36604 Author: Becky Bruce <bgill@freescale.com>
36605 Date: Thu Jan 10 14:00:28 2008 -0600
36607 86xx: Support 2GB DIMMs
36609 Configure the number of bits used to address the banks inside the SDRAM
36610 device. The default register value of 0 means 2 bits to address 4 banks.
36611 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
36613 Signed-off-by: Becky Bruce <bgill@freescale.com>
36615 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
36616 Author: Niklaus Giger <niklausgiger@gmx.ch>
36617 Date: Thu Jan 10 18:50:33 2008 +0100
36619 ppc4xx: Make Sequoia boot vxWorks
36622 TLB 0 a entry for the Machine Check interrupt
36623 TLB 1 a entry for the RAM
36624 TLB 2 a entry for the EBC
36625 TLB 3 a entry for the boot flash
36627 After changing the baudrate to 9600 I had no problems to boot the
36628 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
36631 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36633 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
36634 Author: Larry Johnson <lrj@arlinx.com>
36635 Date: Wed Jan 9 23:10:27 2008 -0500
36637 ppc4xx: Fix dflush() to restore DVLIM register
36639 Signed-off-by: Larry Johnson <lrj@acm.org>
36641 commit 252f60b068d1f94190b5bcfda169db582387e15e
36642 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36643 Date: Thu Jan 10 03:52:44 2008 -0500
36645 Nios2: remove common/cmd_bdinfo.c unused variable.
36647 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36648 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
36650 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
36651 Author: Ben Warren <biggerbadderben@gmail.com>
36652 Date: Wed Jan 9 18:15:53 2008 -0500
36654 Fix Ethernet init() return codes
36656 Change return values of init() functions in all Ethernet drivers to conform
36662 All drivers going forward should return 0 on success. Current drivers that
36663 return 1 on success were left as-is to minimize changes.
36665 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
36666 Acked-by: Stefan Roese <sr@denx.de>
36667 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36668 Acked-by: Kim Phillips <kim.phillips@freescale.com>
36669 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
36670 Acked-By: Timur Tabi <timur@freescale.com>
36672 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
36673 Author: Wolfgang Denk <wd@denx.de>
36674 Date: Thu Jan 10 00:55:14 2008 +0100
36676 Coding Style cleanup; update CHANGELOG
36678 Signed-off-by: Wolfgang Denk <wd@denx.de>
36680 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
36681 Author: Kim Phillips <kim.phillips@freescale.com>
36682 Date: Wed Jan 9 16:56:54 2008 -0600
36684 Add QE brg freq and correct qe bus freq fdt update code
36686 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36687 Signed-off-by: Andy Fleming <afleming@freescale.com>
36689 commit 890dfef06c2d169a3356359596890754dfb8ee1c
36690 Author: Andy Fleming <afleming@freescale.com>
36691 Date: Wed Jan 9 16:34:51 2008 -0600
36693 Remove cache config from ATUM8548 and sbc8548 configs
36695 These boards weren't updated by Kumar's config patch because they
36696 weren't in the tree, yet.
36698 Signed-off-by: Andy Fleming <afleming@freescale.com>
36700 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
36701 Author: Timur Tabi <timur@freescale.com>
36702 Date: Mon Jan 7 13:31:19 2008 -0600
36704 85xx: add ability to upload QE firmware
36706 Define the layout of a binary blob that contains a QE firmware and instructions
36707 on how to upload it. Add function qe_upload_firmware() to parse the blob and
36708 perform the actual upload. Add command-line command "qe fw" to take a firmware
36709 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
36710 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
36711 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
36713 Signed-off-by: Timur Tabi <timur@freescale.com>
36715 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
36716 Author: Kumar Gala <galak@kernel.crashing.org>
36717 Date: Tue Jan 8 01:22:21 2008 -0600
36719 85xx: Remove cache config from configs.h
36721 Either use the standard defines in asm/cache.h or grab the information
36722 at runtime from the L1CFG SPR.
36724 Also, minor cleanup in cache.h to make the code a bit more readable.
36726 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36728 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
36729 Author: robert lazarski <robertlazarski@gmail.com>
36730 Date: Fri Dec 21 10:39:27 2007 -0500
36732 mpc85xx: Add support for ATUM8548 (updated)
36734 Add support for Instituto Atlantico's ATUM8548 board
36736 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
36737 Signed-off-by: Andy Fleming <afleming@freescale.com>
36739 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
36740 Author: robert lazarski <robertlazarski@gmail.com>
36741 Date: Fri Dec 21 10:36:37 2007 -0500
36743 mpc85xx: Add support for ATUM8548 (updated)
36745 Add support for Instituto Atlantico's ATUM8548 board
36747 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
36749 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
36750 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
36751 Date: Thu Dec 13 06:45:14 2007 -0600
36753 mpc85xx: Add support for SBC8548 (updated)
36755 Add support for Wind River's SBC8548 reference board.
36757 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
36759 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
36760 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
36761 Date: Thu Dec 13 06:45:08 2007 -0600
36763 mpc85xx: Add support for SBC8548 (updated)
36765 Add support for Wind River's SBC8548 reference board.
36767 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
36768 Signed-off by: Andy Fleming <afleming@freescale.com>
36770 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
36771 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
36772 Date: Mon Oct 22 19:58:19 2007 +0400
36774 MPC8568E-MDS: set up QE pario for UART1
36776 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
36777 be set up appropriately.
36779 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
36781 commit ad162249cb371e9e38971676f09be791e5f3cf4a
36782 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
36783 Date: Mon Oct 22 18:12:46 2007 +0400
36785 MPC8568E-MDS: reset UCCs to use them reliably
36787 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
36790 p.s Similar code exists in the Linux kernel board file (for capability
36791 reasons with older U-Boots), but should be removed some day.
36793 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
36795 commit 2146cf56821c3364786ca94a7306008c5824b238
36796 Author: Kumar Gala <galak@kernel.crashing.org>
36797 Date: Wed Dec 19 01:18:15 2007 -0600
36799 Reworked FSL Book-E TLB macros to be more readable
36801 The old macros made it difficult to know what WIMGE and perm bits
36802 were set for a TLB entry. Actually use the bit masks for these items
36803 since they are only a single bit.
36805 Also moved the macros into mmu.h out of e500.h since they aren't specific
36808 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36810 commit 1d47273d46925929f8f2c1913cd96d7257aade88
36811 Author: Kumar Gala <galak@kernel.crashing.org>
36812 Date: Tue Dec 18 23:21:51 2007 -0600
36814 Use FSL Book-E MMU macros from Linux Kernel
36816 Grab the FSL Book-E MAS register macros from Linux. Also added
36817 defines for page sizes up to 4TB and removed SHAREN since it doesnt
36820 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36822 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
36823 Author: Andy Fleming <afleming@freescale.com>
36824 Date: Wed Jan 9 13:51:32 2008 -0600
36826 Fix my own merge stupidity
36828 Way back in August I merged Heiko's patch:
36829 566a494f592: [PCS440EP] upgrade the PCS440EP board
36831 with Jon's CONFIG_COMMANDS patches.
36833 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
36835 However, in the process, I left out some of Heiko's good changes.
36837 Now Heiko's and Jon's patches are properly merged in fat_register_device()
36839 Signed-off-by: Andy Fleming <afleming@freescale.com>
36841 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
36842 Author: James Yang <James.Yang@freescale.com>
36843 Date: Wed Jan 9 11:17:49 2008 -0600
36845 Expose parse_line() globally.
36847 Add new function readline_into_buffer() that allows the
36848 output of readline to be put into a pointer to char buffer.
36850 This refactoring allows other functions besides the
36851 main command loop to also use the same input mechanism.
36853 Signed-off-by: James Yang <James.Yang@freescale.com>
36854 Acked-by: Jon Loeliger <jdl@freescale.com>
36856 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
36857 Author: Guennadi Liakhovetski <lg@denx.de>
36858 Date: Wed Jan 9 01:15:25 2008 +0100
36860 trivial: fix consequences of a bad merge
36862 Fix what looks like a merge artifact.
36864 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
36866 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
36867 Author: Zhang Wei <wei.zhang@freescale.com>
36868 Date: Thu Jan 3 10:51:15 2008 +0800
36870 Add Ctrl combo key support to usb keyboard driver.
36872 Ctrl combo key support is added, which is very useful to input Ctrl-C
36873 for interrupt current job.
36874 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
36875 key input when tstc() is called.
36877 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
36879 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
36880 Author: Marcel Ziswiler <marcel@ziswiler.com>
36881 Date: Sun Dec 30 03:30:56 2007 +0100
36883 fix various comments
36885 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
36887 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
36888 Author: Marcel Ziswiler <marcel@ziswiler.com>
36889 Date: Sun Dec 30 03:30:46 2007 +0100
36891 fix comments with new drivers organization
36893 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
36895 commit a9b410dc7d2a4721c408b13abfc037988150f145
36896 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36897 Date: Fri Dec 28 12:50:59 2007 +0900
36899 Remove the obsolete terse version of do_mii()
36901 We now have more useful version of do_mii() and everybody use it.
36902 Gerald Van Baren says:
36904 > When I originally wrote the mii command 6(!) years ago, I wrote a
36905 > verbose version that printed human readable decomposition of the flags,
36906 > etc., and a terse one that didn't print as much stuff and thus had a
36907 > smaller memory footprint.
36909 > It sounds like the terse version has withered and died, apparently
36910 > people are only using the verbose version (which is very understandable,
36913 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36914 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
36916 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
36917 Author: Mike Frysinger <vapier@gentoo.org>
36918 Date: Thu Dec 27 13:42:56 2007 -0500
36920 Do not reference sha1.c when building mkimage.
36922 remove sha1.o from mkimage linking since it isn't actually used.
36924 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
36926 commit b9173af73e524d37c812f210173cf83385c5171a
36927 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36928 Date: Thu Dec 27 15:39:54 2007 +0900
36930 common/cmd_mii.c: Add sanity argc check
36932 If type mii command without arguments, we suffer from uninitialized argv[]
36933 entries; for example we MIPS get stuck by TLB error.
36935 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36937 commit 500856eb1707ed17d9204baa61dd59948d3b2899
36938 Author: Rafal Jaworowski <raj@semihalf.com>
36939 Date: Wed Jan 9 19:39:36 2008 +0100
36941 API for external applications.
36943 This is an API for external (standalone) applications running on top of
36944 U-Boot, and is meant to be more extensible and robust than the existing
36945 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
36948 Included is the demo application using this new framework (api_examples).
36950 Please note this is still an experimental feature, and is turned off by
36953 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
36955 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
36956 Author: Jon Loeliger <jdl@freescale.com>
36957 Date: Wed Jan 9 12:14:55 2008 -0600
36959 86xx: Remove cache config from configs.h
36961 Just use the standard defines in asm/cache.h.
36963 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36965 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
36966 Author: Rafal Jaworowski <raj@semihalf.com>
36967 Date: Wed Jan 9 18:05:27 2008 +0100
36969 Globalize envmatch()
36971 The newly introduced API (routines related to env vars) will need to call
36974 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
36976 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
36977 Author: Jon Loeliger <jdl@freescale.com>
36978 Date: Fri Jan 4 12:07:27 2008 -0600
36980 Convert MPC8610HPCD to use libfdt.
36982 Assumes the presence of the aliases node in the DTS to
36983 locate the pci and serial nodes for fixups.
36985 Use consistent fdtaddr and fdtfile in environment variables.
36987 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36989 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
36990 Author: Jon Loeliger <jdl@freescale.com>
36991 Date: Fri Jan 4 11:58:23 2008 -0600
36993 8610: Fix lingering compile warnings.
36997 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36999 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
37000 Author: Wolfgang Denk <wd@denx.de>
37001 Date: Wed Jan 9 15:14:46 2008 +0100
37003 Coding Style cleanup, update CHANGELOG
37005 Signed-off-by: Wolfgang Denk <wd@denx.de>
37007 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
37008 Author: Mike Frysinger <vapier@gentoo.org>
37009 Date: Tue Dec 18 04:29:55 2007 -0500
37011 fix easylogo on big endian dev systems
37013 didnt realize how out of shape easylogo actually was until i tried using it.
37014 this patch does byte swapping as need be on the input tga header since the tga
37015 is in little endian but the host could just as well be big endian. i didnt
37016 bother using bswap macros or such stuff from system headers as nothing in
37017 POSIX dictates byte swapping functionality.
37019 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
37021 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
37022 Author: Mike Frysinger <vapier@gentoo.org>
37023 Date: Tue Dec 18 03:23:25 2007 -0500
37027 - make the Makefile not suck
37028 - include proper headers for prototypes
37029 - fix obvious broken handling of strchr() when handling '.' in filenames
37031 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
37033 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
37034 Author: raptorbrino@aim.com <raptorbrino@aim.com>
37035 Date: Thu Dec 13 21:23:28 2007 -0500
37037 Fix build problems under Cygwin
37039 This patch allows u-boot to build without error in a cygwin
37040 environment. Cygwin does not define __u64 in it's
37041 include/asm/types.h file. The -idirafter flag in the u-boot
37042 build causes the inclusion of the cygwin types.h file as opposed
37043 to u-bot/include/asm/types.h file which does define __u64.
37044 Subsequently, sha1.c compile fails due to unknown symbol.
37046 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
37048 commit 43ef1c381f9195504a2488f5cb909227eb97d475
37049 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
37050 Date: Fri Nov 30 17:29:59 2007 +0100
37052 cmd_bmp: Add support for displaying gzip compressed bmps
37054 The existing code can show information about a gzip compressed BMP
37055 image, but can't actually display it.
37057 Therefore, move the decompression code out of bmp_info() and use it in
37058 bmp_display() as well in order to display a compressed BMP image.
37060 Also, clean things up a bit and fix a memory leak while we're at it.
37062 [hskinnemoen@atmel.com: a bit of refactoring]
37063 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
37065 commit d197ffd8172c6fdef38733424640a9a47295d6e9
37066 Author: Guennadi Liakhovetski <lg@denx.de>
37067 Date: Thu Nov 29 21:15:56 2007 +0100
37069 Fix and optimize MII operations on FEC (MPC8xx) controllers
37071 This patch fixes several issues at least on a MPC885 based system with two
37072 FEC interfaces used in MII mode.
37074 1. PHY discovery should first read PHY_PHYIDR2 register and only then
37075 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
37076 otherwise the values read are wrong. Also notice, that PHY discovery
37077 cannot work on MPC88x / MPC87x in setups with both FECs active at all
37078 in its present form, because for both interfaces the registers from FEC
37079 1 are used to communicate over MII.
37081 2. Remove code duplication for resetting the FEC by isolating it into a
37084 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
37086 4. Optimize mii_init() to only reset the FEC 1 controller once.
37088 5. Fix a typo in mii_init() using index i instead of j thus potentially
37089 leading to unpredictable results.
37091 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
37093 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
37094 Author: Guennadi Liakhovetski <lg@denx.de>
37095 Date: Tue Nov 20 13:14:20 2007 +0100
37097 Fix endianness conversions in rtl8169 driver
37099 It is unclear on what platforms this driver has been tested, since
37100 noone up to now defines CONFIG_RTL8169 in the board configuration
37101 header. Now it has been fixed for a big-endian mpc8241 based
37102 linkstation platform. This patch presents the necessary endianness
37105 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
37107 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
37108 Author: Zhang Wei <wei.zhang@freescale.com>
37109 Date: Thu Jan 3 10:51:15 2008 +0800
37111 Add Ctrl combo key support to usb keyboard driver.
37113 Ctrl combo key support is added, which is very useful to input Ctrl-C
37114 for interrupt current job.
37115 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
37116 key input when tstc() is called.
37118 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
37119 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
37121 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
37122 Author: Wolfgang Denk <wd@denx.de>
37123 Date: Wed Jan 9 13:43:38 2008 +0100
37125 Coding Style clenaup; update CHANGELOG
37127 Signed-off-by: Wolfgang Denk <wd@denx.de>
37129 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
37130 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37131 Date: Thu Dec 27 17:13:11 2007 +0100
37133 Remove bit swapping in Xilinx Spartan bitfile loading
37135 This patch removes the unnecessary bit swapping when
37136 booting .bit files with the 'fpga loadb' command.
37138 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37140 commit 437fc7327f0611f82937858f2d80e4cd61b40984
37141 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37142 Date: Thu Dec 27 17:13:05 2007 +0100
37144 Fix MSB check in Xilinx Spartan slave serial mode
37146 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37148 commit 3bff4ffa33729a42645e328a21e8d16488872958
37149 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37150 Date: Thu Dec 27 17:12:56 2007 +0100
37152 Add new Xilinx Spartan FPGA types
37154 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37156 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
37157 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37158 Date: Thu Dec 27 17:12:43 2007 +0100
37160 Add pre and post configuration callbacks for Spartan FPGAs
37162 This patch adds a post configuration callback for Spartan2/3 FPGAs.
37163 pre and post configuration callback are now optional and
37164 not called when the function pointer is set to NULL.
37166 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37168 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
37169 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37170 Date: Thu Dec 27 17:12:34 2007 +0100
37172 Improve configuration of FPGA subsystem
37174 This patch removes the FPGA subsystem configuration through
37175 the CONFIG_FPGA bitmask configuration option.
37177 See README for the new options:
37180 CONFIG_FPGA_<vendor>,
37181 CONFIG_FPGA_<family>
37183 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37185 commit 95c6bc7d4a3588b452baca610f8c795a83630477
37186 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37187 Date: Thu Dec 27 16:55:17 2007 +0100
37189 Add Epson RX8025 RTC support
37191 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37193 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
37194 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37195 Date: Thu Dec 27 16:57:23 2007 +0100
37197 serial: Make default_serial_console() a weak function
37199 With this patch it is possible to reimplement default_serial_console()
37200 in board specific code. This will be done in the upcomming PMC440
37201 U-Boot port. This also allows the lwmon board maintainer to
37202 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
37204 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37206 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
37207 Author: Harald Welte <laforge@openmoko.org>
37208 Date: Wed Dec 19 14:14:47 2007 +0100
37210 add 'terminal program' functionality
37212 This patch adds a 'cu' like serial terminal command to u-boot
37213 using which you can access other serial ports from the system console.
37215 OpenMoko uses this in their Neo1973 phones to get access to the GSM
37216 Modem and GPS chip from the bootloader.
37218 Signed-off-by: Harald Welte <laforge@openmoko.org>
37220 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
37221 Author: Harald Welte <laforge@openmoko.org>
37222 Date: Wed Dec 19 14:12:53 2007 +0100
37224 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
37225 that used to exist with the legacy NAND code
37227 Signed-off-by: Harald Welte <laforge@openmoko.org>
37229 commit f540c42d9564854b19ce9bbb70affe172529fe70
37230 Author: Harald Welte <laforge@openmoko.org>
37231 Date: Wed Dec 19 14:09:58 2007 +0100
37233 Fix building with CRAMFS but not JFFS2 support
37235 Signed-off-by: Harald Welte <laforge@openmoko.org>
37237 commit 23d0baf967fecdaf1804f045f6339337c5607eec
37238 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37239 Date: Sat Dec 22 15:52:58 2007 +0100
37241 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
37243 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37244 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37246 commit 23776ff292966a85d811126933830bed48211826
37247 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37248 Date: Tue Dec 11 10:53:12 2007 +0100
37250 ARM: support board-specific ethernet PHY init
37252 Add until the new phylib will be arrived
37254 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37256 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
37257 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37258 Date: Sat Dec 8 16:34:08 2007 +0100
37260 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
37262 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37264 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
37265 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37266 Date: Sun Dec 9 11:01:10 2007 +0100
37268 Add missing file in gitignore and comments
37270 based on Linux source tree's .gitignore files
37272 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37274 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
37275 Author: Wolfgang Denk <wd@denx.de>
37276 Date: Wed Jan 9 11:36:21 2008 +0100
37278 Coding Style cleanup, update CHANGELOG
37280 Signed-off-by: Wolfgang Denk <wd@denx.de>
37282 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
37283 Author: Stefan Roese <sr@denx.de>
37284 Date: Wed Jan 9 10:38:58 2008 +0100
37286 POST: Execute SPR test after relocation
37288 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
37289 self modifying code and this doesn't work with stack in d-cache, since
37290 I can't move the code from d-cache to i-cache. We move the SPR test to
37291 be executed a little later, after relocation. Then stack is located in
37292 SDRAM and this self-modifying code is no problem anymore.
37294 Signed-off-by: Stefan Roese <sr@denx.de>
37296 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
37297 Author: Stefan Roese <sr@denx.de>
37298 Date: Wed Jan 9 10:28:20 2008 +0100
37300 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
37302 This patch configures the LWMON5 port to use d-cache as init-ram and
37303 the unused GPT0_COMP6 as POST WORD storage.
37305 Signed-off-by: Stefan Roese <sr@denx.de>
37307 commit 1754f50b710194f886b6f2831803d8960171a14d
37308 Author: Stefan Roese <sr@denx.de>
37309 Date: Wed Jan 9 10:25:46 2008 +0100
37311 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
37313 The privious 4xx POST implementation only supported storing the POST
37314 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
37315 we need to store the POST WORD in some other non volatile location.
37316 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
37319 Signed-off-by: Stefan Roese <sr@denx.de>
37321 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
37322 Author: Stefan Roese <sr@denx.de>
37323 Date: Wed Jan 9 10:23:16 2008 +0100
37325 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
37327 This patch adds support for locking the init-ram/stack in d-cache,
37328 so that other regions may use d-cache as well
37330 Note, that this current implementation locks exactly 4k of d-cache,
37331 so please make sure that you don't define a bigger init-ram area. Take
37332 a look at the lwmon5 440EPx implementation as a reference.
37334 Signed-off-by: Stefan Roese <sr@denx.de>
37336 commit 0ddb89601a8d29e808db450366752ffdc6267c53
37337 Author: Wolfgang Denk <wd@denx.de>
37338 Date: Wed Jan 9 10:16:33 2008 +0100
37340 Fix memset bug in ext2fs_read_file()
37342 ext2fs_read_file() had the function arguments swapped.
37344 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
37346 Signed-off-by: Wolfgang Denk <wd@denx.de>
37348 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
37349 Author: Markus Klotzbücher <mk@denx.de>
37350 Date: Tue Jan 5 08:17:15 1988 +0100
37352 Fix problems with usb storage devices on MPC5200 /TQM5200
37354 The MPC5200 OHCI controller operates in big endian, so
37355 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
37357 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
37359 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
37360 Author: Wolfgang Denk <wd@denx.de>
37361 Date: Tue Jan 8 22:58:27 2008 +0100
37363 Fix compile problem with new env code.
37365 Signed-off-by: Wolfgang Denk <wd@denx.de>
37367 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
37368 Author: Markus Klotzbücher <mk@denx.de>
37369 Date: Tue Nov 27 10:23:20 2007 +0100
37371 tools: fix fw_printenv tool to compile again
37373 This patch updates the fw_printenv/fw_setenv userspace tool to include
37374 the correct MTD header in order to compile against current kernel
37375 headers. Backward compatibility is preserved by introducing an option
37376 MTD_VERSION which can be set to "old" for compilation using the old MTD
37377 headers. Along with this a number of warnings are fixed.
37379 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
37381 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
37382 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37383 Date: Tue Jan 8 15:40:09 2008 +0100
37385 ppc4xx: assign PCI interrupts on seuqoia boards
37387 Some operating systems rely on assigned PCI interrupts.
37389 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37391 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
37392 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37393 Date: Tue Jan 8 15:50:49 2008 +0100
37395 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
37397 This patch allows the use of 4xx interrupt vector number defines
37398 in board specific code outside cpu/ppc4xx.
37400 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37402 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
37403 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37404 Date: Tue Jan 8 15:39:01 2008 +0100
37406 ppc4xx: Fix UIC2 vector number base
37408 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37410 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
37411 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37412 Date: Tue Jan 8 12:49:58 2008 +0100
37414 ppc4xx: Update PLB/PCI divider for PMC440 board
37416 This patch updates the PLB/PCI divider when running at
37417 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
37419 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37421 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
37422 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37423 Date: Tue Jan 8 11:13:09 2008 +0100
37425 ppc4xx: Disable error message when no NAND chip is installed on PMC440
37427 Add CFG_NAND_QUIET_TEST option to disable error message when
37428 no NAND chip is installed on PMC440 boards.
37430 Disable a couple of config defines that are only used for NAND_U_BOOT.
37432 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37434 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
37435 Author: Wolfgang Denk <wd@denx.de>
37436 Date: Tue Jan 8 22:58:27 2008 +0100
37438 Fix compile problem with new env code.
37440 Signed-off-by: Wolfgang Denk <wd@denx.de>
37442 commit 6de66b35426312a21174a9bf0576a094e2904bea
37443 Author: Markus Klotzbücher <mk@denx.de>
37444 Date: Tue Nov 27 10:23:20 2007 +0100
37446 tools: fix fw_printenv tool to compile again
37448 This patch updates the fw_printenv/fw_setenv userspace tool to include
37449 the correct MTD header in order to compile against current kernel
37450 headers. Backward compatibility is preserved by introducing an option
37451 MTD_VERSION which can be set to "old" for compilation using the old MTD
37452 headers. Along with this a number of warnings are fixed.
37454 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
37456 commit ad3006fe7e84667021753b74247b0bafd97ba35f
37457 Author: Gerald Van Baren <vanbaren@cideas.com>
37458 Date: Mon Jan 7 23:47:32 2008 -0500
37460 LIBFDT: use memmove() instead of memcpy()
37462 This is partial patch from the DTC/libfdt
37463 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
37464 Author: David Gibson <david@gibson.dropbear.id.au>
37465 Date: Wed Nov 21 11:56:14 2007 +1100
37467 The patch also fixes one genuine bug caught by valgrind -
37468 _packblocks() in fdt_rw.c was using memcpy() where it should have been
37471 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
37473 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
37474 Author: David Gibson <david@gibson.dropbear.id.au>
37475 Date: Mon Dec 17 14:42:07 2007 +1100
37477 libfdt: Add more documentation (patch the seventh)
37479 This patch adds more documenting comments to libfdt.h. Specifically,
37480 these document the read/write functions (not including fdt_open_into()
37481 and fdt_pack(), for now).
37483 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
37485 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
37486 Author: David Gibson <david@gibson.dropbear.id.au>
37487 Date: Mon Dec 17 14:41:52 2007 +1100
37489 libfdt: Add more documentation (patch the sixth)
37491 This patch adds some more documenting comments to libfdt.h.
37492 Specifically this documents all the write-in-place functions.
37494 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
37496 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
37497 Author: Gerald Van Baren <vanbaren@cideas.com>
37498 Date: Sat Dec 29 22:45:27 2007 -0500
37500 Fine grained per property /chosen updating.
37502 Implement a suggestion by Scott Wood to make the /chosen handling fine
37503 grained. Don't overwrite pre-existing properties on a per-property basis,
37504 so if /chosen exists but a necessary /chosen/property doesn't, it gets
37505 created. If a /chosen property exists, it is NOT overwritten unless the
37506 "force" flag is true.
37508 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
37510 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
37511 Author: Gerald Van Baren <vanbaren@cideas.com>
37512 Date: Sat Jan 5 15:33:29 2008 -0500
37514 Improve the FDT help message.
37516 Add a note that "fdt copy" makes the new address active.
37517 Remove most of the extra hints at the end of the fdt help.
37519 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
37521 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
37522 Author: Gerald Van Baren <vanbaren@cideas.com>
37523 Date: Sat Jan 5 14:52:04 2008 -0500
37525 Support setting FDT properties with optional values.
37527 Fix a bug found and documented by Bartlomiej Sieka where the optional
37528 value on "fdt set <path> <prop> [<val>]" wasn't optional.
37530 => fdt mknode / testnode
37531 => fdt print /testnode
37534 => fdt set /testnode testprop
37535 => fdt print /testnode
37540 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
37542 commit 22fb2246df91bfc840d87f0c5910818bad55577a
37543 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37544 Date: Fri Dec 28 11:56:30 2007 +0100
37546 Add fdt_find_and_setprop() to fdt_support.h
37548 fdt_find_and_setprop() is used by several 4xx boards and it's
37549 missing in the appropriate header. This patch eliminates a
37550 warning when building U-Boot for such boards.
37552 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37553 Acked-by: Stefan Roese <sr@denx.de>
37555 commit 802b769bac17b0560d3535a42c502469ee190cd1
37556 Author: Stefan Roese <sr@denx.de>
37557 Date: Tue Jan 8 18:39:30 2008 +0100
37559 ppc4xx: Return 0 on success in 4xx ethernet driver
37561 Signed-off-by: Stefan Roese <sr@denx.de>
37563 commit 6775c68683a53c7abc778774641aac6f833a2cbf
37564 Author: Kim Phillips <kim.phillips@freescale.com>
37565 Date: Tue Jan 8 09:59:49 2008 -0600
37567 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
37569 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37571 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
37572 Author: Kim Phillips <kim.phillips@freescale.com>
37573 Date: Thu Dec 20 16:28:34 2007 -0600
37575 mpc83xx: rm remaining FLAT_TREE code
37577 ..in board pci.c files
37579 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37581 commit b3458d2cd55d01732e30a76d898afd99e871cd67
37582 Author: Kim Phillips <kim.phillips@freescale.com>
37583 Date: Thu Dec 20 15:57:28 2007 -0600
37585 mpc83xx: remove FLAT_TREE code
37587 need to rm it from pci code, too!
37589 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37591 commit 5b8bc606c61456566af6912f818a153b6b06f242
37592 Author: Kim Phillips <kim.phillips@freescale.com>
37593 Date: Thu Dec 20 14:09:22 2007 -0600
37595 mpc83xx: convert to using do_fixup_*()
37597 convert to using simpler mpc85xx style fdt update code; streamline by
37598 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
37599 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
37600 converted over to using libfdt).
37602 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37604 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
37605 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
37606 Date: Thu Dec 20 12:58:51 2007 -0500
37608 sbc8349: enable libfdt by default on WRS SBC8349 board.
37610 Make libfdt the default for the WRS SBC8349 board.
37611 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
37612 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
37614 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
37616 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
37617 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
37618 Date: Thu Dec 20 12:58:16 2007 -0500
37620 sbc8349: migrate board to libfdt
37622 This adds libfdt support code for the Wind River sbc8349 board.
37624 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
37625 the other Freescale 83xx boards.
37627 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
37629 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
37630 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
37631 Date: Thu Dec 20 12:56:19 2007 -0500
37633 sbc8349: Remove board specific ECC code
37635 ECC code is now shared for all 83xx boards, so remove board specific one.
37636 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
37638 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
37640 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
37641 Author: Kim Phillips <kim.phillips@freescale.com>
37642 Date: Thu Dec 20 01:30:48 2007 -0600
37644 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
37646 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
37648 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37650 commit ccf21c311e68d48399eff1e72936052885f6e3f7
37651 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
37652 Date: Thu Dec 6 16:43:40 2007 +0100
37654 Add support CONFIG_UEC_ETH3 in MPC83xx
37656 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
37658 commit e6af9932d31171e35db880e7b2f29f903b1b7660
37659 Author: Kumar Gala <galak@kernel.crashing.org>
37660 Date: Mon Nov 26 11:00:54 2007 -0600
37662 Remove CONFIG options related to OF that we dont use
37664 The MPC8360E MDS config defined:
37666 CONFIG_OF_HAS_UBOOT_ENV
37668 Which we don't use or ever needed. This seems like copy-paste feature creep.
37670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37672 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
37673 Author: Kim Phillips <kim.phillips@freescale.com>
37674 Date: Mon Dec 10 14:16:22 2007 -0600
37676 mpc83xx: supress compiler warning
37678 mpc8360emds.c: In function ‘ft_board_setup’:
37679 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
37680 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
37682 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37684 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
37685 Author: Kim Phillips <kim.phillips@freescale.com>
37686 Date: Tue Nov 27 14:17:29 2007 -0600
37688 mpc83xx: fix remaining fdt_find_node_by_path references
37690 rename to fdt_path_offset
37692 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37694 commit 921d4b19ad1be704df58725485d9292dc0414adf
37695 Author: Kim Phillips <kim.phillips@freescale.com>
37696 Date: Mon Nov 19 12:30:09 2007 -0600
37698 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
37700 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
37701 This change guarantees that the environment will be located on the
37702 first flash sector after the U-Boot image.
37704 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37706 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
37707 Author: Kim Phillips <kim.phillips@freescale.com>
37708 Date: Fri Nov 9 14:28:08 2007 -0600
37710 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
37712 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
37713 properties in the device tree so the PHY gets configured for internal delay on
37714 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
37716 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37718 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
37719 Author: Dave Liu <r63238@freescale.com>
37720 Date: Tue Sep 18 12:41:15 2007 +0800
37722 mpc83xx: update the CREDITS and MAINTAINERS
37724 update the CREDITS and MAINTAINERS.
37726 Signed-off-by: Dave Liu <daveliu@freescale.com>
37728 commit b21add4b42af7b767448251b599b91066a160e0d
37729 Author: Dave Liu <r63238@freescale.com>
37730 Date: Tue Sep 18 12:40:21 2007 +0800
37732 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
37734 Add the MAINTAINER and MAKEALL entries for mpc837xemds
37736 Signed-off-by: Dave Liu <daveliu@freescale.com>
37738 commit f8900ce9094c462355eb792eea264ff16ac8fd16
37739 Author: Dave Liu <r63238@freescale.com>
37740 Date: Tue Sep 18 12:38:53 2007 +0800
37742 mpc83xx: Add the MPC837xEMDS board readme
37744 Add the README.mpc837xemds to /doc
37746 Signed-off-by: Dave Liu <daveliu@freescale.com>
37748 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
37749 Author: Dave Liu <r63238@freescale.com>
37750 Date: Tue Sep 18 12:37:57 2007 +0800
37752 mpc83xx: Add the support of MPC837xEMDS board
37754 The MPC837xEMDS board support:
37755 * DDR2 400MHz hardcoded and SPD init
37756 * Local bus NOR Flash
37757 * I2C, UART, MII and RTC
37761 Signed-off-by: Dave Liu <daveliu@freescale.com>
37763 commit 555da61702771fe0f76f3de23b4e7590f3704161
37764 Author: Dave Liu <r63238@freescale.com>
37765 Date: Tue Sep 18 12:36:58 2007 +0800
37767 mpc83xx: Add the support of MPC8315E SoC
37769 The MPC8315E SoC including e300c3 core and new IP blocks,
37770 such as TDM, PCI Express and SATA controller.
37772 Signed-off-by: Dave Liu <daveliu@freescale.com>
37774 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
37775 Author: Dave Liu <r63238@freescale.com>
37776 Date: Tue Sep 18 12:36:11 2007 +0800
37778 mpc83xx: Add the support of MPC837x SoC
37780 The MPC837x SoC including e300c4 core and new IP blocks,
37781 such as SDHC, PCI Express and SATA controller.
37783 Signed-off-by: Dave Liu <daveliu@freescale.com>
37785 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
37786 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
37787 Date: Wed Nov 14 18:54:53 2007 +0300
37789 MPC8360E-MDS: configure and enable second UART
37791 Despite user manual, BCSR9.7 is negated (high) on HRST, so
37792 UART2 is disabled. Fix that and configure QE pins properly.
37794 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
37796 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
37797 Author: Timur Tabi <timur@freescale.com>
37798 Date: Mon Nov 5 09:34:06 2007 -0600
37800 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
37802 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
37803 currently-defined 83xx boards. This change guarantees that the environment
37804 will be located on the first flash sector after the U-Boot image.
37806 Signed-off-by: Timur Tabi <timur@freescale.com>
37807 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37809 commit e05329516a13616b53240cd85b739217c2bf87f1
37810 Author: Larry Johnson <lrj@acm.org>
37811 Date: Fri Jan 4 13:27:02 2008 -0500
37813 ppc4xx: Remove weak binding from common Denali data-eye search code
37815 Now that there are no board-specific versions of
37816 "denali_core_search_data_eye()", the weak binding on the common version
37819 Signed-off-by: Larry Johnson <lrj@acm.org>
37821 commit 5ba576c01602fd328800a427964c36a0a05c5dce
37822 Author: Stefan Roese <sr@denx.de>
37823 Date: Sat Jan 5 09:13:46 2008 +0100
37825 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
37827 Signed-off-by: Stefan Roese <sr@denx.de>
37829 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
37830 Author: Stefan Roese <sr@denx.de>
37831 Date: Sat Jan 5 09:12:41 2008 +0100
37833 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
37835 On Katmai the complete auto-calibration somehow doesn't seem to
37836 produce the best results, meaning optimal values for RQFD/RFFD.
37837 This was discovered by GDA using a high bandwidth scope,
37838 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
37839 so now on Katmai "only" RFFD is auto-calibrated.
37841 This patch also adds RDCC calibration as mentioned on page 7 of
37842 the AMCC PowerPC440SP/SPe DDR2 application note:
37843 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
37845 Signed-off-by: Stefan Roese <sr@denx.de>
37847 commit 49db47b8ae6afff2b898be312948ff501357dc80
37848 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37849 Date: Wed Jan 2 16:48:42 2008 +0100
37851 ppc4xx: Remove sdram.h from PMC440 board
37853 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37855 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
37856 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37857 Date: Wed Jan 2 16:48:34 2008 +0100
37859 ppc4xx: use common denali core defines and data eye search code for PMC440
37861 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37863 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
37864 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37865 Date: Wed Jan 2 12:05:14 2008 +0100
37867 ppc4xx: More cleanup for esd's LCD code
37869 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37871 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
37872 Author: Stefan Roese <sr@denx.de>
37873 Date: Fri Jan 4 12:00:01 2008 +0100
37875 ppc4xx: Fix Sequoia NAND booting target
37877 The Sequoia NAND booting target now uses the recently extracted
37878 cpu/ppc4xx/denali_data_eye.c file too.
37880 Signed-off-by: Stefan Roese <sr@denx.de>
37882 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
37883 Author: Lawrence R. Johnson <lrj@acm.org>
37884 Date: Thu Jan 3 15:02:02 2008 -0500
37886 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
37888 Signed-off-by: Larry Johnson <lrj@acm.org>
37890 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
37891 Author: Lawrence R. Johnson <lrj@acm.org>
37892 Date: Fri Jan 4 02:11:56 2008 -0500
37894 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
37896 Note: this patch changes the configuration of some GPIO registers:
37898 Register Old Value New Value
37899 --------------- ---------- ----------
37900 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
37901 DCR GPIO0_TSRH 0x55005000 0x00000000
37902 DCR GPIO1_TCR 0xC2000000 0xE2000000
37903 DCR GPIO1_TSRL 0x0C000000 0x00200000
37904 DCR GPIO1_ISR2L 0x00050000 0x00110000
37906 Signed-off-by: Larry Johnson <lrj@acm.org>
37908 commit 5ab884b254ca2e707ab50545cd705f30108cf491
37909 Author: Lawrence R. Johnson <lrj@acm.org>
37910 Date: Thu Jan 3 18:54:00 2008 -0500
37912 ppc4xx: Add functionality to GPIO support
37914 This patch makes two additions to GPIO support:
37916 First, it adds function gpio_read_in_bit() to read the a bit from the
37917 GPIO Input Register (GPIOx_IR) in the same way that function
37918 gpio_read_out_bit() reads a bit from the GPIO Output Register
37921 Second, it modifies function gpio_set_chip_configuration() to provide
37922 an additional option for configuring the GPIO from the
37923 "CFG_4xx_GPIO_TABLE".
37925 According to the 440EPx User's Manual, when an alternate output is used,
37926 the three-state control is configured in one of two ways, depending on
37927 the particular output. The first option is to select the corresponding
37928 alternate three-state control in the GPIOx_TRSH/L registers. The second
37929 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
37930 the GPIOx_TRSH/L registers, and set the corresponding bit in the
37931 GPIOx_TCR register to enable the output. For example, the Manual
37932 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
37933 the alternate three-state control (first option), and specifies
37934 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
37935 enabled in the GPIOx_TCR register (second option).
37937 Currently, gpio_set_chip_configuration() configures all alternate signal
37938 outputs to use the first option. This patch allow the second option to
37939 be selected by setting the "out_val" element in the table entry to
37940 "GPIO_OUT_1". The first option is used when the "out_val" element is
37941 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
37942 alternate signal is selected, and because all current GPIO tables set
37943 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
37944 not change any existing configurations.
37946 Signed-off-by: Larry Johnson <lrj@acm.org>
37948 commit 196404cdc1de495d6182e84731c200fc5748df15
37949 Author: Larry Johnson <lrj@arlinx.com>
37950 Date: Sun Dec 30 01:01:54 2007 -0500
37952 PPC4xx: Remove sdram.h from board/lwmon5
37954 These definitions are now in "include/ppc440.h".
37956 Signed-off-by: Larry Johnson <lrj@acm.org>
37958 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
37959 Author: Larry Johnson <lrj@arlinx.com>
37960 Date: Sun Dec 30 01:01:32 2007 -0500
37962 PPC4xx: Use common code for LWMON5 board SDRAM support
37964 This patch also modifies the functionality of the code so that the data-eye
37965 search is now done with with the cache disabled.
37967 Signed-off-by: Larry Johnson <lrj@acm.org>
37969 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
37970 Author: Larry Johnson <lrj@arlinx.com>
37971 Date: Sun Dec 30 01:01:14 2007 -0500
37973 PPC4xx: Remove sdram.h from board/amcc/sequoia
37975 These definitions are now in "include/ppc440.h".
37977 Signed-off-by: Larry Johnson <lrj@acm.org>
37979 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
37980 Author: Larry Johnson <lrj@arlinx.com>
37981 Date: Sun Dec 30 01:00:50 2007 -0500
37983 PPC4xx: Use common code for Sequoia board SDRAM support
37985 Signed-off-by: Larry Johnson <lrj@acm.org>
37987 commit 8b0c5c127690335758100c25eaec2b84db97c101
37988 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37989 Date: Thu Dec 27 16:58:41 2007 +0100
37991 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
37993 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
37994 networking stack does not automatically switch to
37995 another interface. This patch does not touch the default
37998 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37999 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
38001 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
38002 Author: Upakul Barkakaty <upakul@gmail.com>
38003 Date: Thu Nov 29 12:16:13 2007 +0530
38005 NET: Proper return code handling in eth_init() function in file eth.c
38007 This patch modifies the return code handling in the eth_init()
38008 function, to be compatible with the handling of the return codes in
38009 the other network stack files. It now returns a 0 on Success and -1 on
38012 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
38013 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
38015 commit 5ca2d0953e4579a80810966cca2077e20d912c97
38016 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
38017 Date: Mon Nov 19 20:27:04 2007 +0900
38019 net/eth.c: Fix env_enetaddr signed overflow
38021 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
38024 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
38032 Warning: NEC-Candy MAC addresses don't match:
38033 Address in SROM is 00:00:4C:80:92:A2
38034 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
38036 This patch changes env_enetaddr type from `char' to `unsigned char'.
38038 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
38039 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
38040 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
38042 commit f85b60710571b37293d2233933b76e2aa3db5635
38043 Author: Rafal Jaworowski <raj@semihalf.com>
38044 Date: Thu Dec 27 18:19:02 2007 +0100
38046 Introduce new eth_receive routine
38048 The purpose of this routine is receiving a single network frame, outside of
38049 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
38050 U-Boot will let them utilise networking facilities. For sending a raw frame
38051 the already existing eth_send() can be used.
38053 The direct consumer of this routine is the newly introduced API layer for
38054 external applications (enabled with CONFIG_API).
38056 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
38057 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
38058 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
38060 commit 5c740711f0ea5b51414b341b71597c4a0751be74
38061 Author: Jon Loeliger <jdl@freescale.com>
38062 Date: Thu Jan 3 10:41:04 2008 -0600
38064 8610: Move include of config.h earlier.
38066 Include config.h earlier in the set of #includes
38067 so as to avoid a incidental and duplicate definition
38068 of CFG_CACHELINE_SIZE.
38070 Signed-off-by: Jon Loeliger
38072 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
38073 Author: Jon Loeliger <jdl@freescale.com>
38074 Date: Tue Dec 4 10:53:34 2007 -0600
38076 Don't slam #undef DEBUG in the 8641HPCN config file.
38078 Doing so prevents it from being individually set
38079 and useful in other files.
38081 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38083 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
38084 Author: Jon Loeliger <jdl@freescale.com>
38085 Date: Wed Nov 28 14:47:18 2007 -0600
38087 Convert MPC8641HPCN to use libfdt.
38089 Assumes the presence of the aliases node in the DTS to
38090 locate the ethernet, pci and serial nodes for fixups.
38092 Use consistent fdtaddr and fdtfile in environment variables.
38094 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38096 commit ce37422d0002e10490e268392e0c4e3028e52cec
38097 Author: Stefan Roese <sr@denx.de>
38098 Date: Wed Jan 2 14:06:26 2008 +0100
38100 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
38102 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
38103 flash chips connected to a 32bit wide port.
38105 Signed-off-by: Stefan Roese <sr@denx.de>
38107 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
38108 Author: Wolfgang Denk <wd@denx.de>
38109 Date: Wed Jan 2 15:58:44 2008 +0100
38111 Fix compile problem introduced by "cleanup" commit 3dfd708c
38113 Signed-off-by: Wolfgang Denk <wd@denx.de>
38115 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
38116 Author: Wolfgang Denk <wd@denx.de>
38117 Date: Wed Jan 2 15:54:45 2008 +0100
38119 Make scripts and Makefiles POSIX compliant
38121 The bash builtin versions of the "test" (resp. "[") command allow
38122 using "==" for string comparisons, but POSIX compatible implemen-
38123 tations (like /usr/bin/test) insist on using "=" only. On such systems
38126 $ /usr/bin/test a == a && echo OK
38127 /usr/bin/test: ==: binary operator expected
38129 This patch fixes Makefiles and scripts to use POSIX style.
38131 Signed-off-by: Wolfgang Denk <wd@denx.de>
38133 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
38134 Author: Stefan Roese <sr@denx.de>
38135 Date: Wed Jan 2 14:05:37 2008 +0100
38137 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
38139 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
38140 flash chips connected to a 32bit wide port.
38142 Signed-off-by: Stefan Roese <sr@denx.de>
38144 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
38145 Author: Wolfgang Denk <wd@denx.de>
38146 Date: Wed Jan 2 12:38:43 2008 +0100
38148 Minor coding style cleanup.
38150 Signed-off-by: Wolfgang Denk <wd@denx.de>
38152 commit e174ac34adf5d5653df12bc3cf19c52063a71269
38153 Author: Stefan Roese <sr@denx.de>
38154 Date: Fri Dec 28 17:29:56 2007 +0100
38156 ppc4xx: Coding style cleanup
38158 Signed-off-by: Stefan Roese <sr@denx.de>
38160 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
38161 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38162 Date: Fri Dec 28 17:07:24 2007 +0100
38164 ppc4xx: Complete PMC440 board support
38166 This patch brings the PMC440 board configuration file.
38167 Finally it enables the PMC440 board support.
38169 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38171 commit 407843a582560fc5231299561ab3c2b6b6cd3397
38172 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38173 Date: Fri Dec 28 17:07:18 2007 +0100
38175 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
38177 This patch adds some BSP commands and FPGA booting support
38178 for esd's PMC440 boards.
38180 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38182 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
38183 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38184 Date: Fri Dec 28 17:07:14 2007 +0100
38186 ppc4xx: Add initial esd PMC440 board files
38188 This patch adds the first files for the new esd PMC440 boards.
38189 The next two patches will complete the PMC440 board support.
38191 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38193 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
38194 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38195 Date: Fri Dec 28 17:10:36 2007 +0100
38197 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
38199 - add EEPROM write protection for esd PLU405 boards.
38200 - initialize NAND GPIOs
38201 - use correct io accessors
38204 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38206 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
38207 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38208 Date: Fri Dec 28 17:10:44 2007 +0100
38210 ppc4xx: use correct io accessors for esd's LCD code
38212 This patch fixes esd's LCD dectection code to work correctly with
38213 newer gcc versions.
38215 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38217 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
38218 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38219 Date: Fri Dec 28 17:10:42 2007 +0100
38221 ppc4xx: Maintenance patch for VOH405 boards
38223 - add EEPROM write protection
38224 - initialize NAND GPIOs
38225 - use correct io accessors
38226 - slow down I2C clock to 100kHz
38227 - enable ext. I2C bus
38230 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38232 commit c05569066dbcba3fdf36d4d1943df265dc316a86
38233 Author: Stefan Roese <sr@denx.de>
38234 Date: Fri Dec 28 16:08:08 2007 +0100
38236 ppc4xx: Enable 405EP PCI arbiter per default on all boards
38238 In an attmemt to clean up the 4xx start.S file, I removed the enabling
38239 of the internal 405EP PCI arbiter. This is needed for multiple other
38240 405EP platforms, like most of the esd 405EP. Now the internal PCI
38241 arbiter is enabled again per default as it has been before.
38243 Signed-off-by: Stefan Roese <sr@denx.de>
38244 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38246 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
38247 Author: Stefan Roese <sr@denx.de>
38248 Date: Fri Dec 28 15:53:46 2007 +0100
38250 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
38252 Signed-off-by: Stefan Roese <sr@denx.de>
38253 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38255 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
38256 Author: Stefan Roese <sr@denx.de>
38257 Date: Fri Dec 28 06:06:04 2007 +0100
38259 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
38261 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
38262 platforms mentioned above.
38264 Signed-off-by: Stefan Roese <sr@denx.de>
38266 commit b568fd25574181a3b12ae3d66b2913903442cb83
38267 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38268 Date: Thu Dec 27 17:03:46 2007 +0100
38270 Remove CPCI440 board
38272 This board never left prototyping state and it
38273 became a millstone round my neck. So remove it.
38275 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38277 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
38278 Author: Larry Johnson <lrj@arlinx.com>
38279 Date: Thu Dec 27 11:28:51 2007 -0500
38281 Add support for Korat PPC440EPx board
38283 These patches add support for the PPC440EPx-based "Korat" board to
38284 U-Boot. They are based primarily on support for the Sequoia board.
38286 Signed-off-by: Larry Johnson <lrj@acm.org>
38288 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
38289 Author: Larry Johnson <lrj@arlinx.com>
38290 Date: Sat Dec 22 15:16:25 2007 -0500
38292 Add configuration file for Korat board
38294 This patch supplies the configuration file for the Korat PPC440EPx-
38297 Signed-off-by: Larry Johnson <lrj@acm.org>
38299 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
38300 Author: Larry Johnson <lrj@arlinx.com>
38301 Date: Sat Dec 22 15:16:11 2007 -0500
38303 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
38305 Signed-off-by: Larry Johnson <lrj@acm.org>
38307 commit aba19604d848b2838cfb9ebe818909e6a216058e
38308 Author: Larry Johnson <lrj@arlinx.com>
38309 Date: Thu Dec 27 10:54:48 2007 -0500
38311 Add 440EPx DDR2 SPD DIMM support
38313 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
38314 controller. It should also work on the 440GRx. It is based on the DDR2
38315 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
38317 This code has been tested on prototype Korat boards with three Kingston
38318 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
38319 (two ranks). The Korat board has a single DIMM socket, but support has
38320 been provided (though not tested) for boards with two DIMM sockets.
38322 Signed-off-by: Larry Johnson <lrj@acm.org>
38324 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
38325 Author: Larry Johnson <lrj@arlinx.com>
38326 Date: Sat Dec 22 15:15:30 2007 -0500
38328 Copy 440EPx/GRx SDRAM data-eye search to common directory
38330 This patch creates a non-board-specific file for performing the SDRAM
38331 data-eye search. It also adds ECC error checking to the test of valid
38332 data on readback when ECC is enabled.
38334 Signed-off-by: Larry Johnson <lrj@acm.org>
38336 commit c46f53333b22b1f9098676bea8884fc7db820cf3
38337 Author: Larry Johnson <lrj@arlinx.com>
38338 Date: Sat Dec 22 15:15:13 2007 -0500
38340 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
38342 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
38343 It also fixes two typos in the definitions, so the board-specific
38344 "sdram.h" files containing these definitions are also fixed to avoid
38347 Signed-off-by: Larry Johnson <lrj@acm.org>
38349 commit c348578bf612d0c56d8d376d23cae16defbd86af
38350 Author: Larry Johnson <lrj@arlinx.com>
38351 Date: Thu Dec 27 10:50:55 2007 -0500
38353 Add Ethernet 1000BASE-X support for PPC4xx
38355 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
38356 is defined, the PHY will advertise it's capabilities for autonegotiation
38357 based on the capabilities shown in the PHY's status registers, including
38358 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
38359 advertise hard-coded capabilities, as before.
38361 Signed-off-by: Larry Johnson <lrj@acm.org>
38363 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
38364 Author: Larry Johnson <lrj@arlinx.com>
38365 Date: Thu Dec 27 09:52:17 2007 -0500
38367 Add driver for National Semiconductor LM73 temperature sensor
38369 This driver is based on the driver for the LM75.
38371 Signed-off-by: Larry Johnson <lrj@acm.org>
38373 commit 12618278688ea9b3d76536960a5ad2e3790fac40
38374 Author: Larry Johnson <lrj@arlinx.com>
38375 Date: Sat Dec 22 15:14:00 2007 -0500
38377 Add driver for STMicroelectronics M41T60 RTC
38379 This driver is based on the driver for the M41T11. In the intended
38380 application, the RTC will be powered by a large capacitor, rather than a
38381 battery. The driver therefore checks to see whether the RTC has lost
38382 power. The chip's OUT bit is normally reset from its power-up state. If
38383 the OUT bit is read as set, or if the date and time are not valid, then the
38384 RTC is assumed to have lost power, and its date and time are reset to
38385 1900-01-01 00:00:00.
38387 Support for adjusting the speed of the clock to improve accuracy is
38388 provided through an environment variable.
38390 Signed-off-by: Larry Johnson <lrj@acm.org>
38392 commit d3471173e14b7544bb60339eda8d3d3906694b0a
38393 Author: Larry Johnson <lrj@arlinx.com>
38394 Date: Sat Dec 22 15:34:39 2007 -0500
38396 Use out_be32() and friends to access memory-mapped registers in sequoia.c
38398 Signed-off-by: Larry Johnson <lrj@acm.org>
38400 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
38401 Author: Larry Johnson <lrj@arlinx.com>
38402 Date: Sat Dec 22 15:34:20 2007 -0500
38404 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
38406 Signed-off-by: Larry Johnson <lrj@acm.org>
38408 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
38409 Author: Larry Johnson <lrj@arlinx.com>
38410 Date: Sat Dec 22 15:23:50 2007 -0500
38412 Cosmetic changes to ECC POST for AMCC Denali core
38414 Signed-off-by: Larry Johnson <lrj@acm.org>
38416 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
38417 Author: Stefan Roese <sr@denx.de>
38418 Date: Wed Dec 26 20:20:19 2007 +0100
38420 ppc4xx: Fix compilation problem in 405 cache POST test
38422 Signed-off-by: Stefan Roese <sr@denx.de>
38424 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
38425 Author: Stefan Roese <sr@denx.de>
38426 Date: Sat Dec 22 12:20:09 2007 +0100
38428 ppc4xx: Move virtual address of POST cache test to bigger address
38430 On Sequoia & LWMON5 the virtual address of the POST cache test is now
38431 moved to a bigger address. This enables usage of more memory on those
38434 Signed-off-by: Stefan Roese <sr@denx.de>
38436 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
38437 Author: Stefan Roese <sr@denx.de>
38438 Date: Sat Dec 22 12:18:26 2007 +0100
38440 ppc4xx: Fix problem in 44x cache POST routine
38442 As repoted by Larry Johnson, running "diag run cache" caused a crash
38443 in U-Boot. This problem was introduced by a patch that removed the
38444 TLB entry for the cache test after the test has completed. Since this
38445 TLB was only setup once, a 2nd attempt to run this cache test
38446 failed with a crash. Now this TLB entry is created every time the
38449 Signed-off-by: Stefan Roese <sr@denx.de>
38451 commit b0265b576bb8fa9465f99e99c323768b562fadc2
38452 Author: Stefan Roese <sr@denx.de>
38453 Date: Fri Dec 21 07:51:29 2007 +0100
38455 ppc4xx: Update Makalu fdt support
38457 Signed-off-by: Stefan Roese <sr@denx.de>
38459 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
38460 Author: Stefan Roese <sr@denx.de>
38461 Date: Wed Dec 19 09:05:40 2007 +0100
38463 ppc4xx: Add fdt support to AMCC Katmai eval board
38465 Signed-off-by: Stefan Roese <sr@denx.de>
38467 commit 328a340392a5df9aaf00792be989df73e750859e
38468 Author: Stefan Roese <sr@denx.de>
38469 Date: Tue Dec 18 08:44:51 2007 +0100
38471 ppc4xx: fdt: Cleanup setup of cpu node setup
38473 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
38474 without using the absolute path to the cpu node. This makes it possible
38475 to use this U-Boot version with both versions of cpu-node naming
38476 "cpu@0" and the former "PowerPC,440EPx@0".
38478 Signed-off-by: Stefan Roese <sr@denx.de>
38480 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
38481 Author: Stefan Roese <sr@denx.de>
38482 Date: Mon Dec 17 17:26:21 2007 +0100
38484 ppc4xx: Fix lwmon5 compilation problem
38486 Now that the 440EPx ECC test is not board specific anymore
38487 remove this Makefile.
38489 Signed-off-by: Stefan Roese <sr@denx.de>
38491 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
38492 Author: Anatolij Gustschin <agustschin@t-online.de>
38493 Date: Wed Dec 5 17:43:20 2007 +0100
38495 Fix ppc4xx clear_bss() code
38497 ppc4xx clear_bss() fails if BSS segment size is not
38498 divisible by 4 without remainder. This patch provides
38499 fix for this problem.
38501 Signed-off-by: Anatolij Gustschin <agust@denx.de>
38503 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
38504 Author: Niklaus Giger <niklausgiger@gmx.ch>
38505 Date: Fri Nov 30 18:35:11 2007 +0100
38507 PPC4xx: Minimal changes to add vxWorks support
38509 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38511 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
38512 Author: Markus Klotzbücher <mk@denx.de>
38513 Date: Fri Nov 23 13:09:18 2007 +0100
38515 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
38517 When using dhcp/bootp the "netmask" environment variable is not
38518 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
38519 desireable, so the following patch adds this this option to the board
38522 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
38523 Signed-off-by: Stefan Roese <sr@denx.de>
38525 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
38526 Author: Larry Johnson <lrj@arlinx.com>
38527 Date: Sat Oct 27 12:48:15 2007 -0400
38529 Fix/enhance ECC POST for 440EPx/GRx
38531 This patch allows the ECC POST to be used for different boards with the
38532 PPC440 Denali SDRAM controller. Modifications include skipping the test
38533 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
38534 to prevent timing errors.
38536 Signed-off-by: Larry Johnson <lrj@acm.org>
38538 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
38539 Author: Larry Johnson <lrj@arlinx.com>
38540 Date: Sat Oct 27 12:48:05 2007 -0400
38542 PPC4xx: Move/rename ECC POST for 440EPx/GRx
38544 Signed-off-by: Larry Johnson <lrj@acm.org>
38546 commit c29d2d3680046d430022c55e50fcb27f5866517e
38547 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38548 Date: Fri Dec 14 11:20:33 2007 +0100
38550 ppc4xx: use correct io accessors for 4xx ethernet POST
38552 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38554 commit ba79fde58a48c0a6ff8e2a96caba951594142203
38555 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38556 Date: Fri Dec 14 11:19:56 2007 +0100
38558 ppc4xx: fix flush + invalidate_dcache_range arguments
38560 flush + invalidate_dcache_range() expect the start and stop+1 address.
38561 So the stop address is the first address behind (!) the range.
38563 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38565 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
38566 Author: Stefan Roese <sr@denx.de>
38567 Date: Fri Dec 14 08:41:29 2007 +0100
38569 ppc4xx: fdt: use fdt_fixup_ethernet()
38571 By using aliases in the dts file, the ethernet node fixup is
38572 much easier with the recently added functions.
38574 Please note that the dts file needs the aliases for this to work.
38576 Signed-off-by: Stefan Roese <sr@denx.de>
38578 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
38579 Author: Stefan Roese <sr@denx.de>
38580 Date: Thu Dec 13 14:52:53 2007 +0100
38582 ppc4xx: Bring 4xx fdt support up-to-date
38584 This patch update the 4xx fdt support. It enabled fdt booting
38585 on the AMCC Kilauea and Sequoia for now. More can follow later
38588 Signed-off-by: Stefan Roese <sr@denx.de>
38590 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
38591 Author: Stefan Roese <sr@denx.de>
38592 Date: Thu Dec 27 07:50:54 2007 +0100
38594 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
38596 The check for an sufficiently erased destination was missing in the
38597 buffered write function of the cfi flash driver (when
38598 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
38599 writing to such a region will fail with the currect error message.
38601 Signed-off-by: Stefan Roese <sr@denx.de>
38603 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
38604 Author: Martin Krause <martin.krause@tqs.de>
38605 Date: Mon Nov 12 10:56:17 2007 +0100
38607 Some configuration updates for the TQM5200 based TB5200 board:
38609 - enable command line history
38610 - increase malloc space (because of bigger flash sectors)
38612 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38614 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
38615 Author: Martin Krause <martin.krause@tqs.de>
38616 Date: Thu Sep 27 11:10:08 2007 +0200
38618 TQM8xx: use the CFI flash driver on all TQM8xx boards
38620 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38622 commit 11d9eec479b470eab9242ab937fca70a876d9376
38623 Author: Martin Krause <martin.krause@tqs.de>
38624 Date: Wed Sep 26 17:55:56 2007 +0200
38626 TQM885D: adjust for doubled flash sector size + some minor fixes
38628 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38630 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
38631 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
38632 Date: Wed Sep 26 17:55:54 2007 +0200
38634 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
38636 CAS-Latency=2, Write Recovery Time tWR=2
38637 The max. supported bus frequency is 66 MHz. Therefore, changed
38638 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
38640 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38642 commit b988b8cd443989be65161888eea0127ad03f846f
38643 Author: Martin Krause <martin.krause@tqs.de>
38644 Date: Wed Sep 26 17:55:56 2007 +0200
38646 TQM885D: use calculated cpuclk instead of measuring it
38648 On the TQM885D the measurement of cpuclk with the PIT reference
38649 timer ist not necessary. Since all module variants use the same
38650 external 10 MHz oscillator, the cpuclk only depends on the PLL
38651 configuration - which is readable by software.
38653 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38655 commit 492c7049869348d31168de8dad89651315e468e0
38656 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
38657 Date: Thu Sep 27 14:54:46 2007 +0200
38659 TQM885D: fix SDRAM refresh
38661 At 133 MHz the current SDRAM refresh rate is too fast
38662 (measured 4 * 1.17 us).
38663 CFG_MAMR_PTA changes from 39 to 128. This result
38664 in a refresh rate of 4 * 7.8 us at the default clock
38665 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
38666 This is a compromise until a new method is found to
38667 adjust the refresh rate.
38669 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38671 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
38672 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
38673 Date: Thu Sep 27 14:54:46 2007 +0200
38675 TQM860M: Support for 10col SDRAMs, max. 128 MiB
38677 Signed-off-by: Martin Krause <martin.krause@tqs.de>
38679 commit 61fb15c516fef5631e305f1976d7b3a679725856
38680 Author: Wolfgang Denk <wd@denx.de>
38681 Date: Thu Dec 27 01:52:50 2007 +0100
38683 Fix coding style issues; update CHANGELOG.
38685 Signed-off-by: Wolfgang Denk <wd@denx.de>
38687 commit 467bcee11fe26ad422f2de971aa70866079870f2
38688 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38689 Date: Fri Dec 14 15:36:18 2007 +0100
38691 cfi_flash: Add manufacturer-specific fixups
38693 Run fixups based on the JEDEC manufacturer ID independent of the
38696 This changes current behaviour: Previously, geometry reversal for AMD
38697 chips were done based on the command set ID, while they are now done
38698 based on the JEDEC manufacturer and device ID.
38700 Also add fixup for top-boot Atmel chips. A fixup is needed for
38701 AT49BV6416(T) too, but since u-boot currently only reads the low byte
38702 of the device ID, there's no way to tell it apart from AT49BV642D,
38703 which should not have this fixup. Since AT49BV642D support is
38704 necessary to get ATNGW100 board support into mainline, I've commented
38705 out the fixup for now.
38707 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38709 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
38710 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38711 Date: Fri Dec 14 15:36:17 2007 +0100
38713 cfi_flash: Add cmdset-specific init functions
38715 Move things like reading JEDEC IDs and fixing up geometry reversal
38716 into separate functions. The geometry reversal fixup is now performed
38717 by altering the qry structure directly, which makes the sector init
38718 code slightly cleaner.
38720 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38722 commit e23741f4a6d8047520ef0d4971762749b3587d32
38723 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38724 Date: Fri Dec 14 15:36:16 2007 +0100
38726 cfi_flash: Read whole QRY structure in one go
38728 Read out the whole CFI Standard Query structure after successful cfi
38729 identification. This allows subsequent code to access this information
38730 directly without having to go through flash_read_uchar() and friends.
38732 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38734 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
38735 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38736 Date: Mon Dec 17 11:02:44 2007 +0100
38738 AVR32: Fix logic inversion in disable_interrupts()
38740 disable_interrupts() should return nonzero if interrupts were
38741 _enabled_ before, not disabled.
38743 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38745 commit acac475212cbedb17b321a363a1c878e2b47b37f
38746 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38747 Date: Fri Dec 14 16:51:22 2007 +0100
38749 AVR32: Enable interrupts at bootup
38751 The timer code depends on the timer interrupt to keep track of the
38752 upper 32 bits of the cycle counter. This obviously doesn't work when
38753 interrupts are disabled the whole time.
38755 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38757 commit 9570bcd87f4db255514f43b6701746c412f8fef0
38758 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38759 Date: Thu Nov 15 10:03:45 2007 +0100
38761 AVR32: Fix wrong pin setup for USART3
38763 As reported by Gerhard Berghofer:
38765 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
38766 instead of PB18 and PB19.
38768 which is obviously correct. There's currently no code that uses
38769 USART3, but custom boards may run into problems.
38771 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38773 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
38774 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38775 Date: Thu Nov 1 12:44:20 2007 +0100
38777 README: Remove ATSTK1000 daughterboard list
38779 As noted by Kim Phillips, these lists tend to become out of date.
38781 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38783 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
38784 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38785 Date: Tue Oct 30 14:56:36 2007 +0100
38787 Add ATSTK100[234] to MAINTAINERS
38789 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
38790 "mother". Also update the entry for ATSTK1000 to be not only about the
38791 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
38793 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38795 commit 64ff2357b1727213803591813dbc779c924bf772
38796 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38797 Date: Mon Oct 29 13:02:54 2007 +0100
38799 AVR32: Add support for the ATSTK1004 board
38801 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
38802 which is a derivative of AT32AP7000.
38804 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38806 commit 667568db157f374b85abd7e03596ddd1f0b25681
38807 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38808 Date: Mon Oct 29 13:02:54 2007 +0100
38810 AVR32: Add support for the ATSTK1003 board
38812 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
38813 which is a derivative of AT32AP7000.
38815 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38817 commit 5fee84a794a51ec830548cda485a770efb018b92
38818 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38819 Date: Mon Oct 29 13:23:33 2007 +0100
38821 AVR32: Make some AT32AP700x peripherals optional
38823 Add a chip-features file providing definitions of the form
38825 AT32AP700x_CHIP_HAS_<peripheral>
38827 to indicate the availability of the given peripheral on the currently
38830 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38832 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
38833 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38834 Date: Mon Oct 29 13:09:56 2007 +0100
38836 AVR32: Rename at32ap7000 -> at32ap700x
38838 The SoC-specific code for all the AT32AP700x CPUs is practically
38839 identical; the only difference is that some chips have less features
38840 than others. By doing this rename, we can add support for the AP7000
38841 derivatives simply by making some features conditional.
38843 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38845 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
38846 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38847 Date: Fri Jun 29 18:22:34 2007 +0200
38849 atmel_mci: Show SR when block read fails
38851 Show controller status as well as card status when an error occurs
38854 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38856 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
38857 Author: Stefan Roese <sr@denx.de>
38858 Date: Thu Dec 13 14:52:53 2007 +0100
38860 ppc4xx: Bring 4xx fdt support up-to-date
38862 This patch update the 4xx fdt support. It enabled fdt booting
38863 on the AMCC Kilauea and Sequoia for now. More can follow later
38866 Signed-off-by: Stefan Roese <sr@denx.de>
38868 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
38869 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38870 Date: Thu Dec 13 12:56:34 2007 +0100
38872 cfi_flash: Use map_physmem() and unmap_physmem()
38874 Use map_physmem() and unmap_physmem() to convert from physical to
38875 virtual addresses. This gives the arch a chance to provide an uncached
38876 mapping for flash accesses.
38878 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38880 commit 4d7d6936eb29af7cca330937808312aa5f61454d
38881 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38882 Date: Thu Dec 13 12:56:33 2007 +0100
38884 Introduce map_physmem() and unmap_physmem()
38886 map_physmem() returns a virtual address which can be used to access a
38887 given physical address without involving the cache. unmap_physmem()
38888 should be called when the virtual address returned by map_physmem() is
38891 This patch adds a stub implementation which simply returns the
38892 physical address cast to a uchar * for all architectures except AVR32,
38893 which converts the physical address to an uncached virtual mapping.
38894 unmap_physmem() is a no-op on all architectures, but if any
38895 architecture needs to do such mappings through the TLB, this is the
38896 hook where those TLB entries can be invalidated.
38898 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38900 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
38901 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38902 Date: Thu Dec 13 12:56:32 2007 +0100
38904 cfi_flash: Introduce read and write accessors
38906 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
38907 them to access the flash memory. This makes it clearer when the flash
38908 is actually being accessed; merely dereferencing a volatile pointer
38909 looks just like any other kind of access.
38911 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38913 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
38914 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38915 Date: Thu Dec 13 12:56:31 2007 +0100
38917 Implement __raw_{read,write}[bwl] on all architectures
38919 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
38920 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
38923 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38925 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
38926 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38927 Date: Sat Oct 6 18:55:36 2007 +0200
38929 cfi_flash: Reorder functions and eliminate extra prototypes
38931 Reorder the functions in cfi_flash.c so that each function only uses
38932 functions that have been defined before it. This allows the static
38933 prototype declarations near the top to be eliminated and might allow
38934 gcc to do a better job inlining functions.
38936 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38938 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
38939 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38940 Date: Thu Dec 13 12:56:29 2007 +0100
38942 cfi_flash: Make some needlessly global functions static
38944 Make functions not declared in any header file static.
38946 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38948 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
38949 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38950 Date: Thu Dec 13 12:56:28 2007 +0100
38952 cfi_flash: Break long lines
38954 This patch tries to keep all lines in the cfi_flash driver below 80
38955 columns. There are a few lines left which don't fit this requirement
38956 because I couldn't find any trivial way to break them (i.e. it would
38957 take some restructuring, which I intend to do in a later patch.)
38959 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38961 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
38962 Author: Bartlomiej Sieka <tur@semihalf.com>
38963 Date: Tue Dec 11 13:59:57 2007 +0100
38965 CFI: synchronize command offsets with Linux CFI driver
38967 Fixes non-working CFI Flash on the Inka4x0 board.
38969 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
38971 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
38972 Author: Kumar Gala <galak@kernel.crashing.org>
38973 Date: Fri Dec 7 12:17:34 2007 -0600
38975 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
38977 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
38978 (MPC8544DS, MPC8548CDS, MPC8568MDS).
38980 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38982 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
38983 Author: Kumar Gala <galak@kernel.crashing.org>
38984 Date: Fri Dec 7 12:04:30 2007 -0600
38986 Update Freescale MPC85xx ADS/CDS/MDS board config
38988 * Enabled CONFIG_CMD_ELF
38990 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38992 commit d435793229ce29a42797c1edc39f5b34f987f91a
38993 Author: Kumar Gala <galak@kernel.crashing.org>
38994 Date: Fri Dec 7 04:59:26 2007 -0600
38996 Handle Asynchronous DDR clock on 85xx
38998 The MPC8572 introduces the concept of an asynchronous DDR clock with
38999 regards to the platform clock.
39001 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
39004 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39006 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
39007 Author: Kumar Gala <galak@kernel.crashing.org>
39008 Date: Thu Nov 29 10:34:28 2007 -0600
39010 Update Freescale MPC85xx ADS/CDS/MDS board config
39012 * Removed some misc environment setup
39013 * Enabled CONFIG_CMDLINE_EDITING
39015 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39017 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
39018 Author: Kumar Gala <galak@kernel.crashing.org>
39019 Date: Thu Nov 29 10:47:44 2007 -0600
39021 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
39023 Minor path corrections needed to ensure buildability.
39025 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39027 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
39028 Author: Kumar Gala <galak@kernel.crashing.org>
39029 Date: Thu Nov 29 10:16:18 2007 -0600
39031 Move the MPC8540 ADS board under board/freescale.
39033 Minor path corrections needed to ensure buildability.
39035 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39037 commit 870ceac5b3a3486c109396e005af81ae762b5710
39038 Author: Kumar Gala <galak@kernel.crashing.org>
39039 Date: Thu Nov 29 10:14:50 2007 -0600
39041 Move the MPC8560 ADS board under board/freescale.
39043 Minor path corrections needed to ensure buildability.
39045 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39047 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
39048 Author: Kumar Gala <galak@kernel.crashing.org>
39049 Date: Thu Nov 29 10:13:47 2007 -0600
39051 Move the MPC8568 MDS board under board/freescale.
39053 Minor path corrections needed to ensure buildability.
39055 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39057 commit a853d56c59b33415304531443633808736acfc6e
39058 Author: Kumar Gala <galak@kernel.crashing.org>
39059 Date: Thu Nov 29 02:18:59 2007 -0600
39061 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
39063 We already had defines for LAWAR_TRGT_IF_* that we should use
39064 rather than creating new ones. Also, added some missing defines for
39067 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39069 commit 04db400892da37b76a585e332a0c137954ad2015
39070 Author: Kumar Gala <galak@kernel.crashing.org>
39071 Date: Thu Nov 29 02:10:09 2007 -0600
39073 Stop using immap_t on 85xx
39075 In the future the offsets to various blocks may not be in same location.
39076 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
39077 instead of getting it via &immap.
39079 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39081 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
39082 Author: Kumar Gala <galak@kernel.crashing.org>
39083 Date: Thu Nov 29 01:23:09 2007 -0600
39085 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
39087 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39089 commit c480861bf000156e6a3e932c258db59ff2212dd3
39090 Author: Kumar Gala <galak@kernel.crashing.org>
39091 Date: Thu Nov 29 01:06:19 2007 -0600
39093 Update MPC8568 MDS to use libfdt
39095 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
39096 ethernet, pci, and serial for the various fixups that are done.
39098 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39100 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
39101 Author: Haiying Wang <Haiying.Wang@freescale.com>
39102 Date: Wed Nov 14 15:52:06 2007 -0500
39104 Add PCI Express support on MPC8568MDS
39106 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
39107 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39109 commit b90d25497625b90ffa3f2911a0895ca237556ff5
39110 Author: Kumar Gala <galak@kernel.crashing.org>
39111 Date: Thu Nov 29 00:11:44 2007 -0600
39113 Update MPC85xx CDS to use libfdt
39115 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
39116 ethernet, pci, and serial for the various fixups that are done.
39118 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39120 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
39121 Author: Kumar Gala <galak@kernel.crashing.org>
39122 Date: Wed Nov 28 22:54:27 2007 -0600
39124 Update MPC8540 ADS to use libfdt
39126 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
39127 ethernet, pci, and serial for the various fixups that are done.
39129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39131 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
39132 Author: Kumar Gala <galak@kernel.crashing.org>
39133 Date: Wed Nov 28 22:40:31 2007 -0600
39135 Update MPC8560 ADS to use libfdt
39137 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
39138 ethernet, pci, and serial for the various fixups that are done.
39140 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39142 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
39143 Author: Kumar Gala <galak@kernel.crashing.org>
39144 Date: Wed Nov 28 00:36:33 2007 -0600
39146 Stop using immap_t for cpm offset on 85xx
39148 In the future the offsets to various blocks may not be in same location.
39149 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
39150 instead of getting it via &immap->im_cpm.
39152 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39154 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
39155 Author: Kumar Gala <galak@kernel.crashing.org>
39156 Date: Tue Nov 27 23:25:02 2007 -0600
39158 Stop using immap_t for guts offset on 85xx
39160 In the future the offsets to various blocks may not be in same location.
39161 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
39162 instead of getting it via &immap->im_gur.
39164 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39166 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
39167 Author: Kumar Gala <galak@kernel.crashing.org>
39168 Date: Tue Nov 27 22:42:34 2007 -0600
39170 Update MPC8544 DS config
39172 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
39173 * Removed some misc environment setup
39174 * Moved to using fdtfile & fdtaddr as fdt env var names
39175 * Enabled CONFIG_CMDLINE_EDITING
39177 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39179 commit addce57e2e4c49e77ffb2020a84690713bb18b47
39180 Author: Kumar Gala <galak@kernel.crashing.org>
39181 Date: Mon Nov 26 17:12:24 2007 -0600
39183 Update MPC8544DS to use libfdt
39185 Updated the MPC8544DS config to use libfdt and assume use of aliases for
39186 ethernet, pci, and serial for the various fixups that are done.
39188 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39190 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
39191 Author: Kumar Gala <galak@kernel.crashing.org>
39192 Date: Thu Nov 29 00:15:30 2007 -0600
39194 Add libfdt based ft_cpu_setup for mpc85xx
39196 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39198 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
39199 Author: Stefan Roese <sr@denx.de>
39200 Date: Tue Dec 11 13:38:19 2007 +0100
39202 ppc4xx: Correct GPIO offset in gpio_config()
39204 Thanks to Gary Jennejohn for pointing this out.
39206 Signed-off-by: Stefan Roese <sr@denx.de>
39208 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
39209 Author: Stefan Roese <sr@denx.de>
39210 Date: Tue Dec 11 11:46:01 2007 +0100
39212 rtc: Fix merging problem
39214 Signed-off-by: Stefan Roese <sr@denx.de>
39216 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
39217 Author: Stefan Roese <sr@denx.de>
39218 Date: Sat Dec 8 14:47:34 2007 +0100
39220 ppc4xx: 405EX: Correctly enable USB pins
39222 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
39223 function control) registers. This is done for the AMCC Kilauea and
39224 Makalu eval boards.
39226 Signed-off-by: Stefan Roese <sr@denx.de>
39228 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
39229 Author: Stefan Roese <sr@denx.de>
39230 Date: Sat Dec 8 08:25:09 2007 +0100
39232 CFI: Coding style cleanup
39234 Signed-off-by: Stefan Roese <sr@denx.de>
39236 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
39237 Author: Michael Schwingen <michael@schwingen.org>
39238 Date: Fri Dec 7 23:35:02 2007 +0100
39240 CFI: support JEDEC flash roms in CFI-flash framework
39242 The following patch adds support for non-CFI flash ROMS, by hooking into the
39243 CFI flash code and using most of its code, as recently discussed here in the
39244 thread "Mixing CFI and non-CFI flashs".
39246 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39247 Signed-off-by: Stefan Roese <sr@denx.de>
39249 commit c01b17dd856fa120b2970f50d9598546a4927ec3
39250 Author: Gerald Van Baren <vanbaren@cideas.com>
39251 Date: Wed Nov 28 21:24:50 2007 -0500
39253 Conditionally compile fdt_fixup_ethernet()
39255 Fix compiler warnings: On boards that don't have ethernets defined,
39256 don't compile fdt_fixup_ethernet().
39258 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
39259 Author: Kumar Gala <galak@kernel.crashing.org>
39260 Date: Tue Nov 27 21:59:46 2007 -0600
39262 Convert boards that set memory node to use fdt_fixup_memory()
39264 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39266 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
39267 Author: Kumar Gala <galak@kernel.crashing.org>
39268 Date: Mon Nov 26 17:06:15 2007 -0600
39270 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
39272 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
39273 determine which serial alias we should set linux,stdout-path to.
39275 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39277 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
39278 Author: Kumar Gala <galak@kernel.crashing.org>
39279 Date: Mon Nov 26 14:57:45 2007 -0600
39281 Add common memory fixup function
39283 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
39285 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39287 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
39288 Author: Kumar Gala <galak@kernel.crashing.org>
39289 Date: Mon Nov 26 11:19:12 2007 -0600
39291 Conditionally compile fdt_support.c
39293 Modify common/Makefile to conditionally compile fdt_support.c based
39294 on CONFIG_OF_LIBFDT.
39296 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39298 commit d88e7ba0980773479e1a64badb293116071b7ef0
39299 Author: Kumar Gala <galak@kernel.crashing.org>
39300 Date: Mon Nov 26 10:41:40 2007 -0600
39302 Fix build breakage due to libfdt import
39304 The IDS8247 got lost in the update and need an API update
39305 do to rename of functions in libfdt.
39307 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39309 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
39310 Author: Gerald Van Baren <vanbaren@cideas.com>
39311 Date: Fri Nov 23 19:43:20 2007 -0500
39313 Add spaces around the = in the fdt print format.
39315 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
39317 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
39318 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39319 Date: Fri Dec 7 01:25:38 2007 +0900
39321 sh: Moved driver of the SuperH dependence
39323 The composition of the directory in the drivers/ changed.
39324 I moved SuperH serial driver and marubun PCMCIA driver.
39326 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39328 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
39329 Author: Wolfgang Denk <wd@denx.de>
39330 Date: Thu Dec 6 10:21:19 2007 +0100
39334 Signed-off-by: Wolfgang Denk <wd@denx.de>
39336 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
39337 Author: Wolfgang Denk <wd@denx.de>
39338 Date: Thu Dec 6 10:21:03 2007 +0100
39340 ADS5121 Board: fix compile problem.
39342 Signed-off-by: Wolfgang Denk <wd@denx.de>
39344 commit a27044b14a9e93678a82d7b35f202b93e7687abc
39345 Author: Stefan Roese <sr@denx.de>
39346 Date: Thu Dec 6 05:58:43 2007 +0100
39348 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
39350 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
39351 setting the FIXD bit in the SDR0_MFR register. Here a description of the
39354 Problem Description
39355 ------------------------------
39356 If a DMA is performed between memory and PCI with the DMA 1 Controller
39357 using prefetch, and as a result uses a special purpose buffer selected by
39358 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
39359 the first part of the transfer sequence is performed twice. The
39360 PPC440SPe PCI Controller requests more data than was needed such that in
39361 the case of enforce memory protection, a host CPU exception can occur.
39362 No data is corrupted, because data transfer is stopped in the PCI
39363 Controller. Prefetch enable is specified by setting DMA Configuration
39364 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
39366 Behavior that may be observed in a running system
39367 ---------------------------------------------------------------------------
39369 1. DMA performance is decreased because of the double access on the PCI bus
39371 2. If an illegal access to some address on the PCI bus is detected at the
39372 system level, a machine check or similar system error may occur.
39374 Workarounds Available
39375 ----------------------------------
39377 1. Do not program prefetch. Note that a prefetch command cannot be programmed
39378 without selecting a special purpose buffer.
39379 2. To avoid crossing a physical boundary of the PCI slave device, add 512
39380 bytes of address to the PCI address range.
39382 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
39383 from AMCC and slighly changed.
39385 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
39386 Signed-off-by: Stefan Roese <sr@denx.de>
39388 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
39389 Author: Stefan Roese <sr@denx.de>
39390 Date: Tue Dec 4 16:29:48 2007 +0100
39392 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
39394 Signed-off-by: Stefan Roese <sr@denx.de>
39396 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
39397 Author: Wolfgang Denk <wd@denx.de>
39398 Date: Mon Dec 3 00:15:28 2007 +0100
39400 Prepare for 1.3.1-rc1
39402 Signed-off-by: Wolfgang Denk <wd@denx.de>
39404 commit e15e33433e7c05111968dc9b434a52fd42cbd221
39405 Author: Stefan Roese <sr@denx.de>
39406 Date: Fri Nov 30 07:15:41 2007 +0100
39408 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
39410 This manual PCIe reset triggering solves the problem seen with the
39411 Intel EPRO/1000 card, which was not detected (link not established)
39412 upon power-up reset.
39414 Signed-off-by: Stefan Roese <sr@denx.de>
39416 commit 260eea5676ca46903a335686cc020b29c4ca46fe
39417 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39418 Date: Thu Nov 29 01:21:54 2007 +0900
39420 sh: Add SuperH boards maintainer to MAINTAINERS file
39422 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
39424 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39426 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
39427 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39428 Date: Thu Nov 29 00:13:04 2007 +0900
39430 sh: Add ms7750se support in MAKEALL
39432 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39434 commit c7144373427a178332bf9754131c8c34c52c200a
39435 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39436 Date: Tue Nov 27 09:44:53 2007 +0100
39438 sh: Add sh3 and sh4 support in MAKEALL
39440 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39441 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39443 commit 130080874a3d28450098481a262c5f7c855e908d
39444 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39445 Date: Sun Nov 25 02:51:17 2007 +0900
39447 sh: Add document for SuperH.
39449 This document is a summary of information concerning SuperH of U-Boot.
39451 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39453 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
39454 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39455 Date: Sun Nov 25 02:39:31 2007 +0900
39457 sh: Add marubun's pcmcia driver
39459 Marubun pcmcia is a chip for PCMCIA used with SuperH.
39460 Of course, this can be used even by other architectures.
39461 When use this driver, came to be able to use CompactFlash
39464 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39466 commit febd86b969b975289ed948f1ac0eb9722da41ced
39467 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39468 Date: Sun Nov 25 02:32:13 2007 +0900
39470 sh: Update SuperH SCIF driver
39472 - Changed volatile unsigned to vu_.
39473 - Changed Makefile for kconfig.
39475 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39477 commit 8be760903645af09871be50ad0a6f9ebb62b311d
39478 Author: Stefan Roese <sr@denx.de>
39479 Date: Tue Nov 27 11:57:35 2007 +0100
39481 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
39483 After an error in the AMCC 405EX users manual now correctly configure
39484 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
39487 Signed-off-by: Stefan Roese <sr@denx.de>
39489 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
39490 Author: Wolfgang Denk <wd@denx.de>
39491 Date: Mon Nov 26 19:18:21 2007 +0100
39493 Cleanup coding style; update CHANGELOG
39495 Signed-off-by: Wolfgang Denk <wd@denx.de>
39497 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
39498 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39499 Date: Sun Nov 25 22:39:25 2007 +0100
39501 MAKEALL: add missing 512x boards in ppc
39503 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39505 commit a340c325e668ca7386c2276387681720be9c3757
39506 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39507 Date: Sun Nov 25 18:45:47 2007 +0100
39509 Makefile : fix tags ctags etags with new drivers organization
39511 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39513 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
39514 Author: Stefan Roese <sr@denx.de>
39515 Date: Mon Nov 26 15:06:14 2007 +0100
39517 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
39519 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
39522 Signed-off-by: Stefan Roese <sr@denx.de>
39524 commit ca1ce226287270bb01e25b8e3674c701f12edf19
39525 Author: Stefan Roese <sr@denx.de>
39526 Date: Mon Nov 26 15:01:45 2007 +0100
39528 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
39530 Signed-off-by: Stefan Roese <sr@denx.de>
39532 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
39533 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39534 Date: Sun Nov 25 18:45:47 2007 +0100
39536 Makefile : fix tags ctags etags with new drivers organization
39538 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39540 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
39541 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39542 Date: Sat Nov 24 21:26:56 2007 +0100
39544 drivers/mtd : move mtd drivers to drivers/mtd
39546 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39548 commit 318c0b90431f2648552e5ade78833f42652ce859
39549 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39550 Date: Sat Nov 24 21:17:55 2007 +0100
39552 drivers/misc : move misc drivers to drivers/misc
39554 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39556 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
39557 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39558 Date: Sat Nov 24 21:13:59 2007 +0100
39560 drivers/block : move block drivers to drivers/block
39562 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39564 commit 0c698dcaa70275eb8814f665b545547cee013892
39565 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39566 Date: Sat Nov 24 20:59:50 2007 +0100
39568 drivers/rtc : move rtc drivers to drivers/rtc
39570 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39572 commit f868cc5a50757d94f36c312395481cb0f187d9e6
39573 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39574 Date: Sat Nov 24 20:14:44 2007 +0100
39576 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
39578 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39580 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
39581 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39582 Date: Sat Nov 24 19:46:45 2007 +0100
39584 drivers/input : move input drivers to drivers/input
39586 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39588 commit e4558666293364fc3af1c1d9381ca933fa0f1275
39589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39590 Date: Sat Nov 24 19:40:11 2007 +0100
39592 drivers/usb : move usb drivers to drivers/usb
39594 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39596 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
39597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39598 Date: Sat Nov 24 19:33:38 2007 +0100
39600 drivers/serial : move serial drivers to drivers/serial
39602 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39604 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
39605 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39606 Date: Wed Nov 21 21:19:24 2007 +0100
39608 drivers/net : move net drivers to drivers/net
39610 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39612 commit 352d259130b349fe9593b8dada641bd78a9659e5
39613 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39614 Date: Tue Nov 20 20:41:48 2007 +0100
39616 drivers/video : move video drivers to drivers/video
39618 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39620 commit 73646217186aa17afc8e305c5f06f06dd335eaad
39621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39622 Date: Tue Nov 20 20:33:09 2007 +0100
39624 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
39626 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39628 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
39629 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39630 Date: Tue Nov 20 20:28:09 2007 +0100
39632 drivers/pci : move pci drivers to drivers/pci
39634 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39636 commit 9162352817579840d7802da6d85872b3ca003c97
39637 Author: Gerald Van Baren <vanbaren@cideas.com>
39638 Date: Thu Nov 22 17:23:23 2007 -0500
39640 Fix fdt printing for updated libfdt
39642 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
39644 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
39646 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
39647 Author: Kumar Gala <galak@kernel.crashing.org>
39648 Date: Wed Nov 21 13:30:15 2007 -0600
39650 Add additional fdt fixup helper functions
39652 Added the following fdt fixup helpers:
39653 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
39654 * do_fixup_by_compat{_u32} - Find matching nodes by compat
39656 The _u32 variants work the same only the property they are setting
39657 is know to be a 32-bit integer instead of a byte buffer.
39659 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39661 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
39662 Author: Kumar Gala <galak@kernel.crashing.org>
39663 Date: Wed Nov 21 11:11:03 2007 -0600
39665 Add fdt_fixup_ethernet helper to set mac addresses
39667 Added a fixup helper that uses aliases to set mac addresses
39668 in the device tree based on the bd_t
39670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39672 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
39673 Author: Kumar Gala <galak@kernel.crashing.org>
39674 Date: Wed Nov 21 14:07:46 2007 -0600
39676 Fix warnings from import of libfdt
39678 cmd_fdt.c: In function fdt_print:
39679 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
39680 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
39681 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
39682 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
39684 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39686 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
39687 Author: Kumar Gala <galak@kernel.crashing.org>
39688 Date: Wed Oct 24 11:04:22 2007 -0500
39690 Update libfdt from device tree compiler (dtc)
39692 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
39693 the device tree compiler (dtc) project.
39695 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39697 commit e93becf80d732b64aef81b23e8b6ece02c40533d
39698 Author: Kumar Gala <galak@kernel.crashing.org>
39699 Date: Sat Nov 3 19:46:28 2007 -0500
39701 Move do_fixup* for libfdt into common code
39703 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
39704 into common/fdt_support.c and renamed:
39706 do_fixup() -> do_fixup_by_path()
39707 do_fixup_u32() -> do_fixup_by_path_u32()
39709 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39711 commit f738b4a75998f42a7408defadc9baac7a31c92db
39712 Author: Kumar Gala <galak@kernel.crashing.org>
39713 Date: Thu Oct 25 16:15:07 2007 -0500
39715 Make no options to fdt print default to '/'
39717 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39719 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
39720 Author: Kumar Gala <galak@kernel.crashing.org>
39721 Date: Wed Oct 24 10:21:57 2007 -0500
39723 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
39726 fdt_node_is_compatible
39727 fdt_find_node_by_type
39728 fdt_find_compatible_node
39730 To ease merge of newer libfdt as we aren't using them anywhere at this time.
39732 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
39735 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39737 commit 98e2867cc85409b919f862e6c16026461ec955df
39738 Author: Grant Likely <grant.likely@secretlab.ca>
39739 Date: Wed Nov 21 09:19:37 2007 -0700
39741 [BUILD] Remove libraries when updating autoconf.mk
39743 Fix library problems caused by conditional compilation. Using
39744 autoconf.mk to decide which files to compile has caused a problem when
39745 changing configuration from one board to another without clearing out
39746 the library (*.a) files.
39748 It used to be that the linker was always passed the same list of .o
39749 files when building the .a files. However, that is not longer true
39750 with conditional compilation. Now, a different board config will have
39751 a different file list passed to the linker. The problem occurs when
39752 a library has already been built and the board config is changed.
39754 Since the linker will update instead of replace a preexisting library,
39755 then if the file list changes to remove some object files the old
39756 objects will still exist in the library.
39758 The solution is to remove all old library files when autoconf.mk is
39761 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
39763 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
39764 Author: Kumar Gala <galak@kernel.crashing.org>
39765 Date: Wed Nov 21 08:49:50 2007 -0600
39767 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
39769 Modify libfdt/Makefile to conditionally compile the *.c files based
39770 on the board config.
39772 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39774 commit 4a43719a7738712811d822ca8125427b27a55cdc
39775 Author: Grant Likely <grant.likely@secretlab.ca>
39776 Date: Mon Sep 24 09:05:31 2007 -0600
39778 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
39780 Modify common/Makefile to conditionally compile the cmd_*.c files based
39781 on the board config.
39783 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
39785 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
39786 Author: Grant Likely <grant.likely@secretlab.ca>
39787 Date: Mon Sep 24 09:05:31 2007 -0600
39789 [BUILD] Generate include/autoconf.mk from board config files
39791 Use cpp and sed to postprocess config.h and import the defined values
39792 into include/autoconf.mk. autoconf.mk is then included by config.mk to
39793 give 'make' access to the board configuration.
39795 Doing this enables conditional compilation at the Makefile level instead
39796 of by wrapping every .c file with #ifdef/#endif wrappers.
39798 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
39800 commit 68b88999da87ab88e71e1306192905be3450198e
39801 Author: Jon Loeliger <jdl@freescale.com>
39802 Date: Tue Nov 20 15:02:26 2007 -0600
39804 8610HPCD: Enable the 8610 Display Interface Unit
39806 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39808 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
39809 Author: Jon Loeliger <jdl@freescale.com>
39810 Date: Tue Nov 20 15:00:53 2007 -0600
39812 Move 8610 DIU interface structure definitions to header file.
39814 These two structures are still needed during the
39815 initialization and setup of the DIU hardware.
39816 So move them to the fsl_diu_fb.h file for now.
39819 Noticed-by: York Sun <yorksun@freescale.com>
39820 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39822 commit 080c646dbf474a109c3f85718fb01ce042a38c45
39823 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39824 Date: Tue Nov 20 20:14:18 2007 +0100
39826 drivers/i2c : move i2c drivers to drivers/i2c
39828 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39830 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
39831 Author: Wolfgang Denk <wd@denx.de>
39832 Date: Mon Nov 19 22:20:24 2007 +0100
39834 Prepare for 1.3.0 release.
39836 Signed-off-by: Wolfgang Denk <wd@denx.de>
39838 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
39839 Author: Haiying Wang <Haiying.Wang@freescale.com>
39840 Date: Mon Nov 19 10:02:13 2007 -0500
39842 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
39844 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
39846 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
39848 commit f8c320609366176b31104d9bf5e295232e1c7f1d
39849 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39850 Date: Mon Nov 19 11:14:16 2007 +0900
39852 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
39854 lowlevel_init.S: Assembler messages:
39855 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
39857 Looking at codes, the `memtest' and `clearmem' are intentional mixed
39858 use of `global symbols' and `label' for debugging purpose. To make it
39859 build, just disable global-symbols-use for now. As a result `memtest'
39860 still remains as unused, but leave it be...
39862 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39864 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
39865 Author: Wolfgang Denk <wd@denx.de>
39866 Date: Mon Nov 19 12:59:14 2007 +0100
39868 Fix build problems with mp2usb board
39870 Signed-off-by: Wolfgang Denk <wd@denx.de>
39872 commit 6bf4c686afca1e86e1c384d59218f914605713bf
39873 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39874 Date: Sun Nov 18 18:36:11 2007 +0100
39876 s3c24x0: Fix usb_ohci.c missing in Makefile
39877 and usb_ohci.c warning differ in signedness
39879 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39881 commit 6073f61e078da5ddb521b56256bcc36508589883
39882 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39883 Date: Sun Nov 18 12:55:02 2007 +0100
39885 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
39887 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39889 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
39890 Author: Wolfgang Denk <wd@denx.de>
39891 Date: Sun Nov 18 17:11:09 2007 +0100
39893 Fix compiler warnings for ARM systems.
39895 Signed-off-by: Wolfgang Denk <wd@denx.de>
39897 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
39898 Author: Wolfgang Denk <wd@denx.de>
39899 Date: Sun Nov 18 16:36:27 2007 +0100
39901 Fix compiler warnings for PPC systems. Update CHANGELOG.
39903 Signed-off-by: Wolfgang Denk <wd@denx.de>
39905 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
39906 Author: Stefan Roese <sr@denx.de>
39907 Date: Sun Nov 18 14:44:44 2007 +0100
39909 ppc4xx: Correct 405EX PCIe UTL register mapping
39911 Map 4k mem space for UTL registers for each port.
39913 Signed-off-by: Stefan Roese <sr@denx.de>
39915 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
39916 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39917 Date: Sat Nov 17 11:31:10 2007 +0100
39919 Fix warning differ in signedness in net/net.c and net/nfs.c
39921 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
39922 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
39923 Date: Sat Nov 17 20:42:45 2007 +0900
39925 gth2.c: Fix a warning on gth2 build.
39927 gth2.c: In function 'misc_init_r':
39928 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
39930 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
39932 commit 2309c130aa4c84b91bd874a41269c923eb61b555
39933 Author: Stefan Roese <sr@denx.de>
39934 Date: Sat Nov 17 07:58:25 2007 +0100
39936 Fix warning differ in signedness in common/cmd_scsi.c
39938 Signed-off-by: Stefan Roese <sr@denx.de>
39940 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
39941 Author: Stefan Roese <sr@denx.de>
39942 Date: Sat Nov 17 14:52:29 2007 +0100
39944 ppc4xx: Update AMCC Kilauea config file
39946 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
39948 Signed-off-by: Stefan Roese <sr@denx.de>
39950 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
39951 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
39952 Date: Sat Nov 17 20:05:26 2007 +0900
39954 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
39956 Current trick to pick up GNU assembler minor version does not work with the
39957 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
39960 $ sde-as --version |grep "GNU assembler"
39961 GNU assembler 2.15.94 mipssde-6.02.02-20050602
39962 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
39964 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
39968 $ mips-linux-as --version |grep "GNU assembler"
39969 GNU assembler (GNU Binutils) 2.18
39970 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
39972 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
39976 As a result of above, you'll see many noises with such binutils:
39979 /bin/sh: line 0: [: : integer expression expected
39980 /bin/sh: line 0: [: : integer expression expected
39981 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
39982 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
39983 /bin/sh: line 0: [: : integer expression expected
39984 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
39985 /bin/sh: line 0: [: : integer expression expected
39986 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
39987 /bin/sh: line 0: [: : integer expression expected
39989 This patch simplifies the trick and makes it work with both versions of gas.
39990 I also replace an expensive `awk (or gawk)' with `cut'.
39992 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
39994 commit 16664f72850846e645616da1c0fa5afcd6d15f15
39995 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
39996 Date: Sat Nov 17 20:05:26 2007 +0900
39998 [MIPS] Remove useless instructions for initializing $gp.
40000 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40002 commit 03c031d5660ea946c39af6e2e16267da857c609f
40003 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40004 Date: Sat Oct 27 15:27:06 2007 +0900
40006 [MIPS] MIPS 4K core: Coding style cleanups
40008 No logical changes.
40010 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40012 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
40013 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40014 Date: Sat Nov 17 20:05:20 2007 +0900
40016 [MIPS] gth2.c: Fix a warning on gth2 build.
40018 gth2.c: In function 'misc_init_r':
40019 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
40021 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40023 commit 4fbd0741b2b6441da10be93e10267122581b7079
40024 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40025 Date: Sat Oct 27 15:22:33 2007 +0900
40027 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
40029 au1x00_eth.c: In function 'au1x00_miiphy_write':
40030 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
40032 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40034 commit f01320459736f156707425cf8112f98606301aa4
40035 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40036 Date: Sat Oct 27 15:00:25 2007 +0900
40038 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
40040 au1x00_eth.c: In function 'au1x00_enet_initialize':
40041 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
40042 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
40043 au1x00_eth.c:246: error: for each function it appears in.)
40044 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
40045 au1x00_eth.c: In function 'au1x00_miiphy_write':
40046 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
40047 make[1]: *** [au1x00_eth.o] Error 1
40049 Fixed by moving these two functions forward.
40051 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40053 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
40054 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40055 Date: Sat Oct 27 15:00:25 2007 +0900
40057 MAKEALL: Added missing pb1000 board
40059 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40061 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
40062 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40063 Date: Sat Oct 27 15:00:24 2007 +0900
40065 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
40067 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40069 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
40070 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40071 Date: Sat Oct 27 15:00:24 2007 +0900
40073 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
40075 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40077 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
40078 Author: Wolfgang Denk <wd@denx.de>
40079 Date: Sat Nov 17 02:34:38 2007 +0100
40081 Update CHANGELOIG, prepare for -rc4
40083 Signed-off-by: Wolfgang Denk <wd@denx.de>
40085 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
40086 Author: Luotao Fu <l.fu@pengutronix.de>
40087 Date: Wed Nov 14 18:58:33 2007 +0100
40089 Fix the i2c frequency and default address in rsdproto board
40091 rsdproto board support has wrong I2C frequency and wrong return value
40094 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
40096 commit 429c180edad038f91c989cb14b478228092e7054
40097 Author: Wolfgang Denk <wd@denx.de>
40098 Date: Sat Nov 17 01:45:38 2007 +0100
40100 powerpc: Backout relocation changes for MPC5121, too.
40102 Apply Grant Likely's backout to MPC5121 code, too.
40104 Pointed out by Rafal Jaworowski <raj@semihalf.com>
40106 Signed-off-by: Wolfgang Denk <wd@denx.de>
40108 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
40109 Author: Grant Likely <grant.likely@secretlab.ca>
40110 Date: Tue Nov 13 22:18:33 2007 -0700
40112 powerpc: Backout relocation changes.
40114 Ugh. I *hate* to back this change out, but these compiler flags don't
40115 work for relocation on all versions of GCC. I've not been able to
40116 reproduce the environment in my setup (and hence, not been able to
40117 find a combination that *does* work), so I've got no choice but to go
40118 back to the old gcc flags and linker script.
40120 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40122 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
40123 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40124 Date: Tue Nov 13 09:11:05 2007 +0100
40126 Fixed mips_io_port_base build errors.
40128 This patch has been sent on:
40131 Although mips_io_port_base is currently a part of IDE command, it is quite
40132 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
40133 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
40135 This patch is triggered by multiple definition of `mips_io_port_base' build
40136 error on gth2 (and tb0229 also needs this fix.)
40138 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
40139 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
40140 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
40141 make: *** [u-boot] Error 1
40143 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40144 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40146 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
40147 Author: Wolfgang Denk <wd@denx.de>
40148 Date: Sat Nov 17 01:30:40 2007 +0100
40150 Fix a bug in the slave serial programming mode for the Xilinx
40151 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
40152 the most significant bit was set, which did not work on any
40153 architecture where "char" defaulted to be an unsigned type.
40155 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
40157 Signed-off-by: Wolfgang Denk <wd@denx.de>
40159 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
40160 Author: Jon Loeliger <jdl@freescale.com>
40161 Date: Thu Nov 1 12:23:29 2007 -0500
40163 86xx: Fix broken variable reference when #def DEBUGing.
40165 Sometimes you can't reference the DDR2 controller variables.
40167 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40169 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
40170 Author: Jason Jin <Jason.jin@freescale.com>
40171 Date: Fri Oct 26 18:32:00 2007 +0800
40173 make 8610 board use pixis reset
40175 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
40177 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
40178 Author: Jason Jin <Jason.jin@freescale.com>
40179 Date: Mon Oct 29 19:26:21 2007 +0800
40181 Unify pixis_reset altbank across board families
40183 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
40184 into the separate board config files.
40186 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
40187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40189 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
40190 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40191 Date: Wed Nov 7 08:19:21 2007 +0100
40193 Fix warning: pointer targets in assignment differ in signedness
40195 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40197 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
40198 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40199 Date: Wed Nov 7 08:19:19 2007 +0100
40201 Fix warning differ in signedness in common/cmd_ide.c
40203 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40205 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
40206 Author: Stefan Roese <sr@denx.de>
40207 Date: Fri Nov 16 14:16:54 2007 +0100
40209 ppc4xx: Enable 405EX PCIe UTL register configuration
40211 Till now the UTL registers on 405EX were not initialized but left with
40212 their default values. This patch new initializes some of the UTL
40213 registers on 405EX.
40215 Signed-off-by: Stefan Roese <sr@denx.de>
40217 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
40218 Author: Stefan Roese <sr@denx.de>
40219 Date: Fri Nov 16 14:00:59 2007 +0100
40221 ppc4xx: Update AMCC Makalu for board rev 1.1
40223 This patch adds changes needed for Makalu rev 1.1:
40225 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
40226 - Enable 2nd ethernet port EMAC1
40227 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
40228 - Reset PCIe ports via GPIO upon bootup
40230 Signed-off-by: Stefan Roese <sr@denx.de>
40232 commit 4d4faae65e115e327425cd514c1a35146a85166b
40233 Author: Grant Likely <grant.likely@secretlab.ca>
40234 Date: Mon Sep 24 09:05:31 2007 -0600
40236 Group PCI and PCMCIA drivers in drivers/Makefile
40238 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40240 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
40241 Author: Grant Likely <grant.likely@secretlab.ca>
40242 Date: Mon Sep 24 09:05:31 2007 -0600
40244 Group block/flash drivers in drivers/Makefile
40246 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40248 commit df58c81551700f058b44cacf55a7997fa63bfe0a
40249 Author: Grant Likely <grant.likely@secretlab.ca>
40250 Date: Mon Sep 24 09:05:31 2007 -0600
40252 Group USB drivers in drivers/Makefile
40254 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40256 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
40257 Author: Grant Likely <grant.likely@secretlab.ca>
40258 Date: Mon Sep 24 09:05:30 2007 -0600
40260 Group i2c drivers in drivers/Makefile
40262 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40264 commit ec00c76de0e5971273905998d62d6bb119324218
40265 Author: Grant Likely <grant.likely@secretlab.ca>
40266 Date: Mon Sep 24 09:05:30 2007 -0600
40268 Group console drivers in drivers/Makefile
40270 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40272 commit 754f230aa01b8c789fc31f8013c2487954073300
40273 Author: Grant Likely <grant.likely@secretlab.ca>
40274 Date: Mon Sep 24 09:05:30 2007 -0600
40276 Group network drivers in drivers/Makefile
40278 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40280 commit f0037c56b0d12cd46215124667b9f83d60ef9391
40281 Author: Grant Likely <grant.likely@secretlab.ca>
40282 Date: Mon Sep 24 09:05:30 2007 -0600
40284 Build: split COBJS value into multiple lines
40286 This change is in preparation for condtitionial compile support in the
40287 build system. By spliting them all into seperate lines now, subsequent
40288 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
40289 be less invasive and easier to review
40291 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40293 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
40294 Author: Grant Likely <grant.likely@secretlab.ca>
40295 Date: Mon Sep 24 09:05:30 2007 -0600
40297 Add .gitignore files
40299 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40300 Acked-by: Kim Phillips <kim.phillips@freescale.com>
40302 commit 955413f35f054a82e40042f1dbcf501c6a05719b
40303 Author: Grant Likely <grant.likely@secretlab.ca>
40304 Date: Thu Nov 15 08:27:52 2007 -0700
40306 Revert "Correct relocation fixup for mpc5xx"
40308 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
40309 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40311 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
40312 Author: Grant Likely <grant.likely@secretlab.ca>
40313 Date: Thu Nov 15 08:24:32 2007 -0700
40315 Revert "Correct fixup relocation for MPC5xxx"
40317 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
40318 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40320 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
40321 Author: Grant Likely <grant.likely@secretlab.ca>
40322 Date: Thu Nov 15 08:21:04 2007 -0700
40324 Revert "Correct fixup relocation for mpc8220"
40326 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
40327 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40329 commit 70922342369e5e39b286fe21e768a239ca07a514
40330 Author: Grant Likely <grant.likely@secretlab.ca>
40331 Date: Thu Nov 15 08:20:57 2007 -0700
40333 Revert "Correct fixup relocation for mpc824x"
40335 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
40336 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40338 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
40339 Author: Grant Likely <grant.likely@secretlab.ca>
40340 Date: Thu Nov 15 08:20:50 2007 -0700
40342 Revert "Correct fixup relocation for mpc8260"
40344 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
40345 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40347 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
40348 Author: Grant Likely <grant.likely@secretlab.ca>
40349 Date: Thu Nov 15 08:20:43 2007 -0700
40351 Revert "Correct fixup relocation for mpc83xx"
40353 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
40354 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40356 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
40357 Author: Grant Likely <grant.likely@secretlab.ca>
40358 Date: Thu Nov 15 08:20:25 2007 -0700
40360 Revert "[MPC512x] Correct fixup relocation"
40362 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
40363 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40365 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
40366 Author: Stefan Roese <sr@denx.de>
40367 Date: Thu Nov 15 14:25:09 2007 +0100
40369 ppc4xx: Small AMCC Kilauea cleanup
40371 Remove not needed pci_target_init() function.
40373 Signed-off-by: Stefan Roese <sr@denx.de>
40375 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
40376 Author: Stefan Roese <sr@denx.de>
40377 Date: Thu Nov 15 14:23:55 2007 +0100
40379 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
40381 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
40382 - Cleanup of the 4xx GPIO functions
40383 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
40385 Signed-off-by: Stefan Roese <sr@denx.de>
40387 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
40388 Author: Stefan Roese <sr@denx.de>
40389 Date: Thu Nov 15 14:20:08 2007 +0100
40391 ppc4xx: AMCC Taihu board config file cleanup
40393 This patch makes the AMCC Taihu a little more compatible to the other
40396 Signed-off-by: Stefan Roese <sr@denx.de>
40398 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
40399 Author: Marian Balakowicz <m8@semihalf.com>
40400 Date: Thu Nov 15 13:37:28 2007 +0100
40402 [INKA4x0] NG hardware: flash support
40404 Disabled and remove inka4x0 custom flash driver, use CFI flash
40407 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
40409 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
40410 Author: Marian Balakowicz <m8@semihalf.com>
40411 Date: Thu Nov 15 13:29:55 2007 +0100
40413 [INKA4x0] NG hardware: SDRAM support
40415 Add support for three new DDR chips that may be present on a NG
40416 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
40418 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
40420 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
40422 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
40423 Author: Marian Balakowicz <m8@semihalf.com>
40424 Date: Thu Nov 15 13:24:43 2007 +0100
40426 [INKA4x0] NG hardware: platform code update
40428 - Cleanup compile warnings.
40429 - Add missing '\0' in default environment.
40430 - Increase CFG_MONITOR_LEN to 256 KiB.
40431 - Add required CFG_USE_PPCENV.
40433 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
40435 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
40436 Author: Peter Pearse <peter.pearse@arm.com>
40437 Date: Thu Nov 15 08:58:00 2007 +0000
40439 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
40440 Remove warnings re onenand_read() & write()
40442 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
40443 Author: Peter Pearse <peter.pearse@arm.com>
40444 Date: Thu Nov 15 08:45:13 2007 +0000
40448 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
40449 Author: Roy Zang <tie-fei.zang@freescale.com>
40450 Date: Thu Sep 13 18:52:28 2007 +0800
40452 Enable ULi1575 Ethernet support in 8610HPCD config
40454 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
40455 Acked-by: Jon Loeliger <jdl@freescale.com>
40457 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
40458 Author: Stefan Roese <sr@denx.de>
40459 Date: Tue Nov 13 08:18:20 2007 +0100
40461 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
40463 Signed-off-by: Stefan Roese <sr@denx.de>
40465 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
40466 Author: Stefan Roese <sr@denx.de>
40467 Date: Tue Nov 13 08:06:11 2007 +0100
40469 ppc4xx: Fix 405EX PCIe UTLSET register setup
40471 Signed-off-by: Stefan Roese <sr@denx.de>
40473 commit 1ce55151c85d068f70317a8d65c61058b891afb4
40474 Author: Heiko Schocher <hs@denx.de>
40475 Date: Tue Nov 13 07:50:29 2007 +0100
40477 [UC101] SRAM now with 2 MB working.
40479 Signed-off-by: Heiko Schocher <hs@denx.de>
40481 commit 2d14684341109a69616e4d6016cd61402d55086f
40482 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40483 Date: Fri Nov 9 15:37:53 2007 +0100
40485 ppc4xx: Use generic usb-ohci driver for sequoia board
40487 This patch makes the sequoia board use the generic usb-ohci driver
40488 instead of cpu/ppc4xx/usb_ohci.c.
40490 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40491 Signed-off-by: Stefan Roese <sr@denx.de>
40493 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
40494 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40495 Date: Fri Nov 9 15:37:23 2007 +0100
40497 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
40499 This patch disables the 44x d-cache on 'usb start' and
40500 reenables it on 'usb stop'. This should be seen as a
40501 temporary fix until the generic usb-ohci driver can
40502 life with d-cache enabled.
40504 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40505 Signed-off-by: Stefan Roese <sr@denx.de>
40507 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
40508 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40509 Date: Fri Nov 9 15:36:44 2007 +0100
40511 ppc4xx: Remove redundant code from 4xx network driver
40513 This patch removes some redundant code and decrements the end
40514 address of cache flush and invalidate by 1.
40516 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40517 Signed-off-by: Stefan Roese <sr@denx.de>
40519 commit 5ca9881aad8c413ac2a82868a5e3719178254502
40520 Author: Peter Pearse <peter.pearse@arm.com>
40521 Date: Fri Nov 9 15:24:26 2007 +0000
40523 Add apollon board support
40524 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
40526 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
40527 Author: Stefan Roese <sr@denx.de>
40528 Date: Fri Nov 9 12:19:58 2007 +0100
40530 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
40532 Signed-off-by: Stefan Roese <sr@denx.de>
40534 commit c7f69c340277935a6c19a956421852da944a365f
40535 Author: Stefan Roese <sr@denx.de>
40536 Date: Fri Nov 9 12:18:54 2007 +0100
40538 ppc4xx: Make output a little shorter on I2C bootrom detection
40540 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
40541 already print a line with the information which I2C bootrom is
40542 used for bootstrap configuration. So we don't need this extra line
40543 with "I2C boot EEPROM en-/dis-abled".
40545 This patch also has a little code cleanup integrated.
40547 Signed-off-by: Stefan Roese <sr@denx.de>
40549 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
40550 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40551 Date: Thu Nov 8 12:50:18 2007 -0600
40553 ColdFire: MCF5329 - Remove reset registers from CCM
40555 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40557 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
40558 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40559 Date: Thu Nov 8 12:31:11 2007 -0600
40561 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
40563 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40565 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
40566 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40567 Date: Thu Nov 8 12:19:01 2007 -0600
40569 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
40571 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40573 commit 225a24b5e062ad94627424508ae814f51dbe1a34
40574 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40575 Date: Wed Nov 7 18:00:54 2007 -0600
40577 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
40579 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40581 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
40582 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40583 Date: Wed Nov 7 17:56:15 2007 -0600
40585 ColdFire: MCF532x - Update do_reset() using core reset
40587 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40589 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
40590 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40591 Date: Wed Nov 7 17:51:00 2007 -0600
40593 ColdFire: Update cpu flag for 4.2-xx compiler
40595 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40597 commit 070ba56115b4da63b46e974287fa4550d4023386
40598 Author: York Sun <yorksun@freescale.com>
40599 Date: Wed Oct 31 14:59:04 2007 -0500
40601 8610: Add console frame buffer support to FSL 8610 DIU driver.
40603 Add cfb console support to FSL 8610 DIU driver.
40604 Inspect board version from PIXIS to obtain correct pixel format.
40606 Use #define CONFIG_VIDEO in config file to enable fb console.
40608 To switch monitor, set monitor variable to
40609 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
40610 followed by "diufb init".
40612 Preserve logo bitmap at the top of the fb console.
40614 Signed-off-by: York Sun <yorksun@freescale.com>
40615 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40617 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
40618 Author: York Sun <yorksun@freescale.com>
40619 Date: Mon Oct 29 13:58:39 2007 -0500
40621 8610: Add 8610 DIU display driver
40623 1280x1024 and 1024x768 @ 32 bpp are supported now.
40624 DVI, Single-link LVDS, Double-link LVDS are all supported.
40626 Environmental variable "monitor" is used to specify monitor port.
40628 A new command "diufb" is introduced to reinitialize monitor
40629 and display a BMP file in the memory. So far, 1-bit, 4-bit,
40630 8-bit and 24-bit BMP formats are supported.
40633 - initialize the diu driver
40634 Enable the port specified in the environmental variable "monitor"
40637 - display bmp file in memory.
40638 The bmp image should be no bigger than the resolution, 1280x1024
40639 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
40641 Note, this driver allocate memory but doesn't free it after use
40642 It is written on purpose -- to avoid a failure of reallocation
40643 due to memory fragement.
40645 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
40647 Signed-off-by: York Sun <yorksun@freescale.com>
40648 Signed-off-by: Jon loeliger <jdl@freescale.com>
40650 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
40651 Author: York Sun <yorksun@freescale.com>
40652 Date: Wed Oct 31 10:43:59 2007 -0500
40654 FSL: Add a freescale bitmap logo.
40656 This Freescale logo is a 340 x 128 x 4bpp BMP file
40657 that can be displayed by the DIU Framebuffer driver.
40659 Signed-off-by: York Sun <yorksun@freescale.com>
40660 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40662 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
40663 Author: York Sun <yorksun@freescale.com>
40664 Date: Mon Oct 29 13:57:53 2007 -0500
40666 8610: Make some extra debug environment variables conditional.
40668 One may #define ENV_DEBUG to get them back again.
40670 Signed-off-by: York Sun <yorksun@freescale.com>
40672 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
40673 Author: Jason Jin <Jason.jin@freescale.com>
40674 Date: Mon Oct 29 19:26:21 2007 +0800
40676 8610: Actually enable pixis_reset CONFIGs
40678 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
40680 commit f3bceaab230b4748d0afc4109b6837308f018b40
40681 Author: Jason Jin <Jason.jin@freescale.com>
40682 Date: Fri Oct 26 18:31:59 2007 +0800
40684 Fix the BAT definition of PCI IO on 8610 board
40686 The address in the BAT register is aligned with the BAT size.
40687 The original definition actually did not define BAT for PCIE2 IO.
40688 This patch fix this.
40690 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
40692 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
40693 Author: Jason Jin <Jason.jin@freescale.com>
40694 Date: Mon Oct 29 19:26:21 2007 +0800
40696 Unify pixis_reset altbank across board families
40698 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
40699 into the separate board config files.
40701 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
40702 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40704 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
40705 Author: Jason Jin <Jason.jin@freescale.com>
40706 Date: Fri Oct 26 18:32:00 2007 +0800
40708 make 8610 board use pixis reset
40710 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
40712 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
40713 Author: Jon Loeliger <jdl@freescale.com>
40714 Date: Thu Nov 1 12:23:29 2007 -0500
40716 86xx: Fix broken variable reference when #def DEBUGing.
40718 Sometimes you can't reference the DDR2 controller variables.
40720 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40722 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
40723 Author: Roy Zang <tie-fei.zang@freescale.com>
40724 Date: Mon Nov 5 17:39:24 2007 +0800
40726 Implement general ULi 526x Ethernet driver support in U-boot
40728 This patch implements general ULi 526x Ethernet driver.
40729 Until now, it is the only native Ethernet port on
40730 MPC8610HPCD board, but it could be used on other boards
40731 with ULi 526x Ethernet port as well.
40733 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
40734 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
40735 Acked-by: Jon Loeliger <jdl@freescale.com>
40736 Signed-off-by: Ben Warren <bwarren@qstreams.com>
40738 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
40739 Author: Larry Johnson <lrj@arlinx.com>
40740 Date: Thu Nov 1 08:46:50 2007 -0500
40742 NET: Add Ethernet 1000BASE-X support for PPC4xx
40744 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
40745 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
40746 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
40747 "mii info" command is modified to distinguish between 1000BASE-T and -X.
40749 Signed-off-by: Larry Johnson <lrj@acm.org>
40750 Signed-off-by: Ben Warren <bwarren@qstreams.com>
40752 commit 298035df4948b113d29ac0e694717d34b95bc5dc
40753 Author: Larry Johnson <lrj@arlinx.com>
40754 Date: Wed Oct 31 11:21:29 2007 -0500
40756 NET: Cosmetic changes
40758 Signed-off-by: Larry Johnson <lrj@acm.org>
40759 Signed-off-by: Ben Warren <bwarren@qstreams.com>
40761 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
40762 Author: Stefan Roese <sr@denx.de>
40763 Date: Mon Nov 5 07:43:05 2007 +0100
40765 ppc4xx: Make output a little shorter on PCIe detection
40767 Now not max 3 lines but 2 lines are printed per PCIe port.
40769 Signed-off-by: Stefan Roese <sr@denx.de>
40771 commit 992742a5b09d9040adbd156fb90756af66ade310
40772 Author: Wolfgang Denk <wd@denx.de>
40773 Date: Sat Nov 3 23:09:27 2007 +0100
40775 Cleanup coding style; update CHANGELOG
40777 Signed-off-by: Wolfgang Denk <wd@denx.de>
40779 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
40780 Author: Bruce Adler <bruce.adler@ccpu.com>
40781 Date: Fri Nov 2 13:15:42 2007 -0700
40783 fix wording in README
40785 Changed the wording to properly describe the shadowing
40786 of the environment from ROM to RAM
40788 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
40790 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
40791 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40792 Date: Wed Oct 31 02:18:15 2007 +0900
40794 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
40796 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
40798 commit ec22755799466c8a103664bb3a5e647bf9c238f4
40799 Author: Vlad Lungu <vlad@comsys.ro>
40800 Date: Thu Oct 25 16:08:14 2007 +0300
40802 Trimmed some variables in ne2000.c
40804 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
40806 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
40807 Author: Zhang Wei <wei.zhang@freescale.com>
40808 Date: Thu Oct 25 17:51:27 2007 +0800
40810 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
40812 The scan code of the key 'z' is 0x1d, which should be handled.
40814 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
40817 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
40819 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
40820 Author: Zhang Wei <wei.zhang@freescale.com>
40821 Date: Thu Oct 25 17:30:04 2007 +0800
40823 Fix USB support issue for MPC8641HPCN board.
40825 The configuration file has already enabled USB, but it
40826 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
40827 on MPC8641HPCN can not work because of the wrong USB
40830 And add the USB command to U-Boot commands list.
40832 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
40834 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
40835 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40836 Date: Wed Oct 24 18:16:01 2007 +0200
40838 Use config_cmd_default.h instead of config_cmd_all.h
40840 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40842 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
40843 Author: Marian Balakowicz <m8@semihalf.com>
40844 Date: Wed Oct 24 01:37:36 2007 +0200
40846 TQM5200: Call usb_cpu_init() during board init
40848 usb_cpu_init() configures GPS USB pins, clocks, etc. and
40849 is required for proper operation of kernel USB subsystem.
40850 This setup was previously done in the kernel by the fixup
40851 code which is being removed, thus low level init must be
40852 done by U-boot now.
40854 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
40856 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
40857 Author: Guennadi Liakhovetski <lg@denx.de>
40858 Date: Tue Oct 23 16:25:50 2007 +0200
40862 An obvious typo. Originally fixed in linkstation u-boot port.
40864 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
40866 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
40867 Author: Guennadi Liakhovetski <lg@denx.de>
40868 Date: Tue Oct 23 14:35:05 2007 +0200
40870 Fix a typo in cpu/mpc824x/interrupts.c
40872 Since December 2003 the timer_interrupt_cpu() function in
40873 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
40874 parameter. Remove it.
40876 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
40878 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
40879 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
40880 Date: Wed Oct 17 11:13:51 2007 +0200
40882 add ft_cpu_setup(..) on mpc8260
40884 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
40885 based on code from mpc5xxx
40887 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
40890 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
40891 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
40892 Date: Wed Oct 17 11:18:42 2007 +0200
40894 changes for IDS8247 board support
40896 To get the IDS8247 board working following are done:
40897 - FCC2 is deactivated
40898 - FCC1 is activated
40900 - CFI driver is activated
40901 - Adapted for use with LIBFDT
40903 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
40906 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
40907 Author: Stefan Roese <sr@denx.de>
40908 Date: Sat Nov 3 12:08:28 2007 +0100
40910 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
40912 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
40913 Again, only one image supports both targets.
40915 Signed-off-by: Stefan Roese <sr@denx.de>
40917 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
40918 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
40919 Date: Wed Oct 24 15:48:37 2007 +0200
40921 ATSTK1002: Remove default ethernet addresses
40923 Wolfgang is right: It's not a good idea to set up default initial
40924 ethernet addresses for a board, even though they belong to the local
40927 This will change the failure mode from "IT manager screams at you for
40928 using duplicate ethernet addresses" to a nice error message explaining
40929 that the ethernet address hasn't been set properly.
40931 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
40933 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
40934 Author: Justin Flammia <jflammia@savantav.com>
40935 Date: Mon Oct 29 17:40:35 2007 -0400
40939 This is a multi-part message in MIME format.
40941 commit e6e505eae94ed721e123e177489291fc4544b7b8
40942 Author: Justin Flammia <jflammia@savantav.com>
40943 Date: Mon Oct 29 17:19:03 2007 -0400
40945 Found a bug in the way the DHCP Request packet is built, where the IP address
40946 that is offered by the server is bound to prematurely. This patch is a fix of
40947 that bug where the IP address offered by the DHCP server is not used until
40948 after the DHCP ACK from the server is received.
40950 Signed-off-by: Justin Flammia <jflammia@savantav.com>
40951 Signed-off-by: Ben Warren <bwarren@qstreams.com>
40953 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
40954 Author: Stefan Roese <sr@denx.de>
40955 Date: Wed Oct 31 20:58:34 2007 +0100
40957 ppc4xx: Fix acadia_nand build problem
40959 Since the cache handling functions were moved from start.S into cache.S
40960 the acadia NAND booting Makfile needs to be adapted accordingly.
40962 Signed-off-by: Stefan Roese <sr@denx.de>
40964 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
40965 Author: Stefan Roese <sr@denx.de>
40966 Date: Wed Oct 31 20:57:11 2007 +0100
40968 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
40970 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
40971 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
40972 boards by defining CONFIG_4xx_DCACHE in the board config file. This
40973 option will disappear, when more boards use is successfully and no
40974 more known problems exist.
40976 This is tested successfully on Sequoia and Katmai. The only problem that
40977 needs to be fixed is, that USB is not working on Sequoia right now, since
40978 it will need some cache handling code too, similar to the 4xx EMAC driver.
40980 Signed-off-by: Stefan Roese <sr@denx.de>
40982 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
40983 Author: Stefan Roese <sr@denx.de>
40984 Date: Wed Oct 31 20:51:10 2007 +0100
40986 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
40988 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
40989 disable the cache for the CPU POST tests, since these tests consist
40990 of self modifying code. This is done via the new change_tlb() function.
40992 Signed-off-by: Stefan Roese <sr@denx.de>
40994 commit f71b2888b4b3c870909a0341427b2a914246f81f
40995 Author: Stefan Roese <sr@denx.de>
40996 Date: Wed Oct 31 20:47:26 2007 +0100
40998 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
41000 This patch enables the 4xx EMAC POST driver to work too, when dcache is
41003 Signed-off-by: Stefan Roese <sr@denx.de>
41005 commit a2685904061b35a17583d65fe47cdc2686a69eaa
41006 Author: Stefan Roese <sr@denx.de>
41007 Date: Wed Oct 31 20:45:53 2007 +0100
41009 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
41011 Signed-off-by: Stefan Roese <sr@denx.de>
41013 commit ff768cb168d8157c24a25016dbfbeb465e47f420
41014 Author: Stefan Roese <sr@denx.de>
41015 Date: Wed Oct 31 18:01:24 2007 +0100
41017 ppc4xx: Change 4xx ethernet driver to handle cached memory too
41019 This patch enables the 4xx EMAC driver to work too, when dcache is
41022 Signed-off-by: Stefan Roese <sr@denx.de>
41024 commit 483e09a223c666269ef81d3573a6591b1046b0ef
41025 Author: Stefan Roese <sr@denx.de>
41026 Date: Wed Oct 31 17:59:22 2007 +0100
41028 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
41030 This function is used to either turn cache on or off in a specific
41033 Signed-off-by: Stefan Roese <sr@denx.de>
41035 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
41036 Author: Stefan Roese <sr@denx.de>
41037 Date: Wed Oct 31 17:57:52 2007 +0100
41039 ppc4xx: Remove cache definition from 4xx board config files
41041 All 4xx board config files don't need the cache definitions anymore.
41042 These are now defined in common headers.
41044 Signed-off-by: Stefan Roese <sr@denx.de>
41046 commit 9b94ac61d2176185c30adf0793e079ec30e68687
41047 Author: Stefan Roese <sr@denx.de>
41048 Date: Wed Oct 31 17:55:58 2007 +0100
41050 ppc4xx: Rework 4xx cache support
41052 New cache handling functions added and all existing functions
41053 moved from start.S into seperate cache.S.
41055 Signed-off-by: Stefan Roese <sr@denx.de>
41057 commit 06713773da4ac3d390c63d82641eb553224b27c2
41058 Author: Stefan Roese <sr@denx.de>
41059 Date: Tue Oct 23 18:03:12 2007 +0200
41061 ppc4xx: Remove compiler warning from previous commit
41063 Signed-off-by: Stefan Roese <sr@denx.de>
41065 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
41066 Author: Stefan Roese <sr@denx.de>
41067 Date: Tue Oct 23 14:40:30 2007 +0200
41069 ppc4xx: Remove temporary TLB entry in POST cache test
41071 Signed-off-by: Stefan Roese <sr@denx.de>
41073 commit 1338e6a81834099ba19733b69aafd8ef5f098094
41074 Author: Stefan Roese <sr@denx.de>
41075 Date: Tue Oct 23 14:05:08 2007 +0200
41077 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
41079 I lately noticed, that newer 4xx board with GBit support sometimes don't
41080 finish link autonegotiation in 4 seconds. Changing this timeout to 5
41081 seconds seems fine here.
41083 Signed-off-by: Stefan Roese <sr@denx.de>
41085 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
41086 Author: Stefan Roese <sr@denx.de>
41087 Date: Tue Oct 23 14:03:17 2007 +0200
41089 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
41091 This patch changes all in32/out32 calls to use the recommended in_be32/
41092 out_be32 macros instead.
41094 Signed-off-by: Stefan Roese <sr@denx.de>
41096 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
41097 Author: Stefan Roese <sr@denx.de>
41098 Date: Thu Oct 25 12:24:59 2007 +0200
41100 ppc4xx: Fix POST ethernet test for Haleakala
41102 The POST ethernet test needed to be changed to dynamically determine
41103 the count of ethernet devices. This code is cloned from the 4xx
41106 Signed-off-by: Stefan Roese <sr@denx.de>
41108 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
41109 Author: Stefan Roese <sr@denx.de>
41110 Date: Tue Oct 23 11:31:05 2007 +0200
41112 ppc4xx: Correct UART input clock calculation and passing to fdt
41114 We now use a value in the gd (global data) structure for the UART input
41115 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
41118 Signed-off-by: Stefan Roese <sr@denx.de>
41120 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
41121 Author: Stefan Roese <sr@denx.de>
41122 Date: Tue Oct 23 10:10:08 2007 +0200
41124 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
41126 The Haleakala is nearly identical with the Kilauea eval board. The only
41127 difference is that the 405EXr only supports one EMAC and one PCIe
41128 interface. This patch adds support for the Haleakala board by using
41129 the identical image for Kilauea and Haleakala. The distinction is done
41130 by comparing the PVR.
41132 Signed-off-by: Stefan Roese <sr@denx.de>
41134 commit 9f798766aa85e62eb8fa8c721e148df609b78137
41135 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
41136 Date: Tue Oct 23 08:29:10 2007 +0200
41138 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
41140 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
41143 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
41144 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
41145 modules are still plugged in. So it is recommended to remove the DIMM
41146 modules while using the NAND booting code with the fixed SDRAM setup!
41148 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
41149 Signed-off-by: Stefan Roese <sr@denx.de>
41151 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
41152 Author: Stefan Roese <sr@denx.de>
41153 Date: Mon Oct 22 16:24:44 2007 +0200
41155 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
41157 Signed-off-by: Stefan Roese <sr@denx.de>
41159 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
41160 Author: Stefan Roese <sr@denx.de>
41161 Date: Mon Oct 22 16:22:40 2007 +0200
41163 ppc4xx: Rework of 4xx serial driver (4)
41167 - Use in_8/out_8 macros instead of in8/out8
41168 - No need for UART_BASE marco anymore, now really handled via function
41170 - serial_init_common() introduced
41171 - Further coding style cleanup
41173 Signed-off-by: Stefan Roese <sr@denx.de>
41175 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
41176 Author: Stefan Roese <sr@denx.de>
41177 Date: Mon Oct 22 15:45:49 2007 +0200
41179 ppc4xx: Rework of 4xx serial driver (3)
41181 Change all linker scripts to reference the changed driver name iop480_uart.o.
41183 Signed-off-by: Stefan Roese <sr@denx.de>
41185 commit 882ae41274921f9016131806bdeb27e19606f47a
41186 Author: Stefan Roese <sr@denx.de>
41187 Date: Mon Oct 22 15:44:39 2007 +0200
41189 ppc4xx: Rework of 4xx serial driver (2)
41191 Change all linker scripts to reference the changed driver name 4xx_uart.o.
41193 Note: In most cased all these explicit referencing of these object files
41194 in the linker scripts is not neccessary. Only for manually embedded
41195 environment into the U-Boot image, which is not done is most cases.
41197 Signed-off-by: Stefan Roese <sr@denx.de>
41199 commit ad31e40bed042cb670d0036fea96435007afb838
41200 Author: Stefan Roese <sr@denx.de>
41201 Date: Mon Oct 22 15:09:59 2007 +0200
41203 ppc4xx: Rework of 4xx serial driver (1)
41205 This patch starts the rework of the PPC4xx serial driver. First we split
41206 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
41207 handling code and the other one iop480_uart.c with the UART code for the
41208 PLX-Tech IOP480 PPC (PPC403 based).
41210 Signed-off-by: Stefan Roese <sr@denx.de>
41212 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
41213 Author: Stefan Roese <sr@denx.de>
41214 Date: Mon Oct 22 10:30:38 2007 +0200
41216 ppc4xx: Correct UART input clock calculation and passing to fdt
41218 Signed-off-by: Stefan Roese <sr@denx.de>
41220 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
41221 Author: Stefan Roese <sr@denx.de>
41222 Date: Mon Oct 22 07:34:34 2007 +0200
41224 ppc4xx: Add initial AMCC Makalu 405EX support
41226 Signed-off-by: Stefan Roese <sr@denx.de>
41228 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
41229 Author: Stefan Roese <sr@denx.de>
41230 Date: Mon Oct 22 07:33:52 2007 +0200
41232 ppc4xx: Add freqUART to CPU speed detection
41234 This value is needed later for the device tree configuration of
41237 Signed-off-by: Stefan Roese <sr@denx.de>
41239 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
41240 Author: Stefan Roese <sr@denx.de>
41241 Date: Sun Oct 21 14:26:29 2007 +0200
41243 ppc: Small Kilauea cleanup of config file
41245 Signed-off-by: Stefan Roese <sr@denx.de>
41247 commit 758c037aeead34b49631b8da3a90b1bba14c0410
41248 Author: Stefan Roese <sr@denx.de>
41249 Date: Sun Oct 21 08:16:12 2007 +0200
41251 rtc: Add Xicor/Intersil X1205 RTC support
41253 This patch adds support for the Xicor/Intersil X1205 RTC used on the
41254 AMCC Makalu eval board. This driver is basically cloned from the Linux
41255 driver version (2.6.23).
41257 This patch also introduces the Linux bcd.h header for the BCD2BIN/
41258 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
41259 should be converted to also use this header instead of implementing
41260 their own local copy of these functions/macros.
41262 Signed-off-by: Stefan Roese <sr@denx.de>
41264 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
41265 Author: Stefan Roese <sr@denx.de>
41266 Date: Sun Oct 21 08:12:41 2007 +0200
41268 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
41270 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
41271 PPC440_SYS_INFO structure into the common ppc4xx.h header.
41273 Lot's of other macros are good candidates to be consolidated this way
41276 Signed-off-by: Stefan Roese <sr@denx.de>
41278 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
41279 Author: Stefan Roese <sr@denx.de>
41280 Date: Sun Oct 21 08:05:18 2007 +0200
41282 ppc4xx: Fix size setup in Kilauea DDR2 init routine
41284 The size was initilized wrong. Instead of 256MB, the DDR2 controller
41285 was setup to 512MB. Now the correct values is used.
41287 This patch also does a little cleanup and adds a comment here.
41289 Signed-off-by: Stefan Roese <sr@denx.de>
41291 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
41292 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
41293 Date: Thu Oct 18 17:29:04 2007 +0200
41295 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
41297 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
41298 number is used to access system registers.
41300 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
41301 Signed-off-by: Stefan Roese <sr@denx.de>
41303 commit c36c68160333ac5fe41ec3db12a728b7075b3912
41304 Author: Stefan Roese <sr@denx.de>
41305 Date: Thu Oct 18 07:42:27 2007 +0200
41307 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
41309 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
41310 is the internal SRAM. Since I now ported and tested this endpoint mode
41311 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
41314 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
41317 Signed-off-by: Stefan Roese <sr@denx.de>
41319 commit 5cb4af4791f61843432155142b6cfac901f66c10
41320 Author: Stefan Roese <sr@denx.de>
41321 Date: Thu Oct 18 07:39:38 2007 +0200
41323 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
41325 This patch adds endpoint support for the AMCC Kilauea eval board. It can
41326 be tested by connecting a reworked PCIe cable (only 1x lane singles
41327 connected) to another root-complex.
41329 In this test setup, a 64MB inbound window is configured at BAR0 which maps
41330 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
41331 access the first 64MB of the SDRAM on the PPC side.
41333 Signed-off-by: Stefan Roese <sr@denx.de>
41335 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
41336 Author: Stefan Roese <sr@denx.de>
41337 Date: Sat Oct 13 16:43:23 2007 +0200
41339 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
41341 This patch adds support for dynamic configuration of PCIe ports for the
41342 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
41343 boards Yucca & Katmai and the 405EX board Kilauea.
41345 This dynamic configuration is done via the "pcie_mode" environement
41346 variable. This variable can be set to "EP" or "RP" for endpoint or
41347 rootpoint mode. Multiple values can be joined via the ":" delimiter.
41352 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
41355 Per default Yucca will be configured as:
41358 Per default Katmai will be configured as:
41359 pcie_mode=RP:RP:REP
41361 Per default Kilauea will be configured as:
41364 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
41365 Signed-off-by: Stefan Roese <sr@denx.de>
41367 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
41368 Author: Stefan Roese <sr@denx.de>
41369 Date: Thu Oct 11 11:15:59 2007 +0200
41371 ppc4xx: Enable device tree support (fdt) on Kilauea per default
41373 This patch enables the fdt support on the AMCC Kilauea eval board.
41374 Additionally now EBC ranges fdt fixup is included to support NOR
41375 FLASH mapping via the Linux physmap_of driver.
41377 This Kilauea port now support booting arch/ppc and arch/powerpc
41378 Linux kernels. The default environment "net_nfs" is for arch/ppc
41379 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
41380 support will be removed.
41382 Signed-off-by: Stefan Roese <sr@denx.de>
41384 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
41385 Author: Stefan Roese <sr@denx.de>
41386 Date: Thu Oct 11 11:11:45 2007 +0200
41388 ppc4xx: Add additional debug info to 4xx fdt support
41390 Signed-off-by: Stefan Roese <sr@denx.de>
41392 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
41393 Author: Stefan Roese <sr@denx.de>
41394 Date: Fri Oct 5 21:28:58 2007 +0200
41396 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
41398 Signed-off-by: Stefan Roese <sr@denx.de>
41400 commit 1941cce71b1ae975602854045061e82f94ecd012
41401 Author: Stefan Roese <sr@denx.de>
41402 Date: Fri Oct 5 17:35:10 2007 +0200
41404 ppc4xx: Fix small merge problem in 4xx_enet.c
41406 Signed-off-by: Stefan Roese <sr@denx.de>
41408 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
41409 Author: Stefan Roese <sr@denx.de>
41410 Date: Fri Oct 5 17:11:30 2007 +0200
41412 ppc4xx: Add initial AMCC Kilauea 405EX support
41414 Signed-off-by: Stefan Roese <sr@denx.de>
41416 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
41417 Author: Stefan Roese <sr@denx.de>
41418 Date: Fri Oct 5 17:10:59 2007 +0200
41420 ppc4xx: Add PPC405EX support
41422 Signed-off-by: Stefan Roese <sr@denx.de>
41424 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
41425 Author: Stefan Roese <sr@denx.de>
41426 Date: Fri Oct 5 17:09:36 2007 +0200
41428 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
41430 Signed-off-by: Stefan Roese <sr@denx.de>
41432 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
41433 Author: Stefan Roese <sr@denx.de>
41434 Date: Fri Oct 5 17:07:50 2007 +0200
41436 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
41438 Signed-off-by: Stefan Roese <sr@denx.de>
41440 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
41441 Author: Stefan Roese <sr@denx.de>
41442 Date: Fri Oct 5 17:04:57 2007 +0200
41444 POST: Add 405EX support to 4xx UART POST test
41446 Signed-off-by: Stefan Roese <sr@denx.de>
41448 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
41449 Author: Stefan Roese <sr@denx.de>
41450 Date: Fri Oct 5 15:10:02 2007 +0200
41452 DTT: Prepare DS1775 driver for use of different I2C addresses
41454 Signed-off-by: Stefan Roese <sr@denx.de>
41456 commit 19e93b1e16d267220440d827b920fbad8abfa70f
41457 Author: Stefan Roese <sr@denx.de>
41458 Date: Fri Oct 5 14:23:43 2007 +0200
41460 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
41462 Signed-off-by: Stefan Roese <sr@denx.de>
41464 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
41465 Author: Stefan Roese <sr@denx.de>
41466 Date: Fri Oct 5 09:22:33 2007 +0200
41468 ppc4xx: 4xx_pcie: Disable debug output as default
41470 Signed-off-by: Stefan Roese <sr@denx.de>
41472 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
41473 Author: Stefan Roese <sr@denx.de>
41474 Date: Fri Oct 5 09:18:23 2007 +0200
41476 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
41478 Signed-off-by: Stefan Roese <sr@denx.de>
41480 commit 4dbee8a90df613eb517aadbecebd70f168913d30
41481 Author: Stefan Roese <sr@denx.de>
41482 Date: Fri Oct 5 07:57:20 2007 +0200
41484 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
41486 128MB seems to be the smallest possible value for the memory size
41487 for on PCIe port. With this change now the BAR's of the PCIe cards
41488 are accessible under U-Boot.
41490 One big note: This only works for PCIe port 0 & 1. For port 2 this
41491 currently doesn't work, since the base address is now 0xc0000000
41492 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
41493 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
41494 to change the base addresses completely and this change would have
41495 too much impact right now.
41497 This patch adds debug output to the 4xx pcie driver too.
41499 Signed-off-by: Stefan Roese <sr@denx.de>
41501 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
41502 Author: Stefan Roese <sr@denx.de>
41503 Date: Wed Oct 3 21:16:32 2007 +0200
41505 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
41507 Signed-off-by: Stefan Roese <sr@denx.de>
41509 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
41510 Author: Stefan Roese <sr@denx.de>
41511 Date: Wed Oct 3 15:01:02 2007 +0200
41513 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
41515 These files were introduced with the IBM 405GP but are currently used on all
41516 4xx PPC platforms. So the name doesn't match the content anymore. This patch
41517 renames the files to 4xx_pci.c/h.
41519 Signed-off-by: Stefan Roese <sr@denx.de>
41521 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
41522 Author: Stefan Roese <sr@denx.de>
41523 Date: Wed Oct 3 14:14:58 2007 +0200
41525 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
41527 Signed-off-by: Stefan Roese <sr@denx.de>
41529 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
41530 Author: Stefan Roese <sr@denx.de>
41531 Date: Wed Oct 3 10:38:09 2007 +0200
41533 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
41535 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
41536 the SDR registers of the PCIe ports. This makes the overall design
41537 clearer, since it removed a lot of switch statements which are not
41540 Also, the functions ppc4xx_init_pcie_rootport() and
41541 ppc4xx_init_pcie_entport() are merged into a single function
41542 ppc4xx_init_pcie_port(), since most of the code was duplicated.
41543 This makes maintainance and porting to other 4xx platforms
41546 Signed-off-by: Stefan Roese <sr@denx.de>
41548 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
41549 Author: Stefan Roese <sr@denx.de>
41550 Date: Wed Oct 3 07:48:09 2007 +0200
41552 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
41554 This patch is the first patch of a series to make the 440SPe PCIe code
41555 usable on different 4xx PPC platforms. In preperation for the new 405EX
41556 which is also equipped with PCIe interfaces.
41558 (2) This patch renames the functions from 440spe_ to 4xx_ with a
41559 little additional cleanup
41561 Signed-off-by: Stefan Roese <sr@denx.de>
41563 commit c7c6da23028f146d912514b95aefa3da7cf37699
41564 Author: Stefan Roese <sr@denx.de>
41565 Date: Wed Oct 3 07:34:10 2007 +0200
41567 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
41569 This patch is the first patch of a series to make the 440SPe PCIe code
41570 usable on different 4xx PPC platforms. In preperation for the new 405EX
41571 which is also equipped with PCIe interfaces.
41573 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
41575 Signed-off-by: Stefan Roese <sr@denx.de>
41577 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
41578 Author: Marian Balakowicz <m8@semihalf.com>
41579 Date: Wed Oct 24 01:37:36 2007 +0200
41581 TQM5200: Call usb_cpu_init() during board init
41583 usb_cpu_init() configures GPS USB pins, clocks, etc. and
41584 is required for proper operation of kernel USB subsystem.
41585 This setup was previously done in the kernel by the fixup
41586 code which is being removed, thus low level init must be
41587 done by U-boot now.
41589 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
41590 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41592 commit b5af773f8d92677e06f3295b45557c9d0a487c24
41593 Author: Zhang Wei <wei.zhang@freescale.com>
41594 Date: Thu Oct 25 17:51:27 2007 +0800
41596 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
41598 The scan code of the key 'z' is 0x1d, which should be handled.
41600 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
41603 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
41604 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41606 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
41607 Author: Rodolfo Giometti <giometti@enneenne.com>
41608 Date: Mon Oct 15 11:59:17 2007 +0200
41610 PXA USB OHCI: "usb stop" implementation.
41612 Some USB keys need to be switched off before loading the kernel
41613 otherwise they can remain in an undefined status which prevents them
41614 to be correctly recognized by the kernel.
41616 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
41617 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41619 commit 31548249decf18a6b877a18436b6139dd483fe4a
41620 Author: Justin Flammia <jflammia@savantav.com>
41621 Date: Mon Oct 29 17:40:35 2007 -0400
41625 This is a multi-part message in MIME format.
41627 commit e6e505eae94ed721e123e177489291fc4544b7b8
41628 Author: Justin Flammia <jflammia@savantav.com>
41629 Date: Mon Oct 29 17:19:03 2007 -0400
41631 Found a bug in the way the DHCP Request packet is built, where the IP address
41632 that is offered by the server is bound to prematurely. This patch is a fix of
41633 that bug where the IP address offered by the DHCP server is not used until
41634 after the DHCP ACK from the server is received.
41636 Signed-off-by: Justin Flammia <jflammia@savantav.com>
41637 Signed-off-by: Ben Warren <bwarren@qstreams.com>
41639 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
41640 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41641 Date: Thu Oct 25 17:16:22 2007 -0500
41643 ColdFire 54455: Fix correct boot location for atmel and intel
41645 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41647 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
41648 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41649 Date: Thu Oct 25 17:14:00 2007 -0500
41651 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
41653 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41655 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
41656 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41657 Date: Thu Oct 25 17:12:36 2007 -0500
41659 ColdFire 5329: Assign correct SDRAM size and fix cache
41661 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41663 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
41664 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41665 Date: Thu Oct 25 17:10:23 2007 -0500
41667 ColdFire 5253: Assign correct SDRAM size
41669 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41671 commit 2acefa72ee0026f862ab65597ca687428f63a973
41672 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41673 Date: Thu Oct 25 17:09:17 2007 -0500
41675 ColdFire 5282: Fix external flash boot and return dramsize
41677 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41679 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
41680 Author: Bartlomiej Sieka <tur@semihalf.com>
41681 Date: Thu Oct 25 17:20:01 2007 +0200
41683 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
41685 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
41687 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
41688 Author: Martin Krause <martin.krause@tqs.de>
41689 Date: Wed Oct 24 08:42:25 2007 +0200
41691 TQM5200: fix spurious characters on second serial interface
41693 With this patch PSC3 is configured as UART. This is done, because if
41694 the pins of PSC3 are not configured at all (-> all pins are GPI),
41695 due to crosstalk, spurious characters may be send over the RX232_2_TXD
41698 Signed-off-by: Martin Krause <martin.krause@tqs.de>
41699 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41701 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
41702 Author: Martin Krause <martin.krause@tqs.de>
41703 Date: Wed Oct 24 08:41:27 2007 +0200
41705 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
41707 Some commands for the STK52xx base board try to access the SM501 grafic
41708 controller. But the TQM5200S has no grafic controller (only the TQM5200
41709 and the TQM5200B have). This patch deactivates the commands accessing
41710 the SM501 for the TQM5200S.
41712 Signed-off-by: Martin Krause <martin.krause@tqs.de>
41713 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41715 commit b31f64343ead9482cd439b1adbe4c34026a641b1
41716 Author: Martin Krause <martin.krause@tqs.de>
41717 Date: Mon Oct 22 16:45:53 2007 +0200
41719 TQM5200: fix spurious characters on second serial interface
41721 With this patch PSC3 is configured as UART. This is done, because if
41722 the pins of PSC3 are not configured at all (-> all pins are GPI),
41723 due to crosstalk, spurious characters may be send over the RX232_2_TXD
41726 Signed-off-by: Martin Krause <martin.krause@tqs.de>
41728 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
41729 Author: Martin Krause <martin.krause@tqs.de>
41730 Date: Mon Oct 22 16:40:06 2007 +0200
41732 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
41734 Some commands for the STK52xx base board try to access the SM501 grafic
41735 controller. But the TQM5200S has no grafic controller (only the TQM5200
41736 and the TQM5200B have). This patch deactivates the commands accessing
41737 the SM501 for the TQM5200S.
41739 Signed-off-by: Martin Krause <martin.krause@tqs.de>
41741 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
41742 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41743 Date: Sun Oct 21 09:14:28 2007 +0200
41745 Mips: Fix string functions differ prototype declaration
41747 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41749 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
41750 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
41751 Date: Fri Oct 19 17:51:40 2007 -0500
41753 fsl_pci_init enable COMMAND_MEMORY if inbound window
41755 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
41756 to pciauto_setup_device has the side effect of not getting
41757 COMMAND_MEMORY set.
41759 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
41761 commit e9d0d527992566ebef9826962ff1745b2f082b92
41762 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41763 Date: Fri Oct 19 10:55:24 2007 +0200
41765 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
41767 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41769 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
41770 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41771 Date: Fri Oct 19 08:10:15 2007 +0200
41773 fix warning: no return statement in function returning non-void
41775 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41777 commit e78220f6e514206757acfe247297fc9a328a881f
41778 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41779 Date: Fri Oct 19 06:33:45 2007 +0200
41781 xsengine: Fix no partition type specified, use DOS as default
41783 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41785 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
41786 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41787 Date: Fri Oct 19 00:24:59 2007 +0200
41789 lubbock: Fix no partition type specified, use DOS as default
41791 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41793 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
41794 Author: Wolfgang Denk <wd@denx.de>
41795 Date: Tue Oct 23 16:50:03 2007 +0200
41797 Coding style: keep lists sorted; update CHANGELOG
41799 Signed-off-by: Wolfgang Denk <wd@denx.de>
41801 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
41802 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41803 Date: Fri Oct 19 00:09:05 2007 +0200
41805 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
41807 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41809 commit 96455bfebc9887837095c9051d216f53c61b5f10
41810 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41811 Date: Fri Oct 19 00:07:39 2007 +0200
41813 Fix warning differ in signedness in board/innokom/innokom.c
41815 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41817 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
41818 Author: Marcel Ziswiler <marcel@ziswiler.com>
41819 Date: Fri Oct 19 00:25:33 2007 +0200
41821 fix pxa255_idp board
41823 The pxa255_idp being an old unmaintained board showed several issues:
41824 1. CONFIG_INIT_CRITICAL was still defined.
41825 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
41826 3. Symbol flash_addr was undeclared.
41827 4. The boards lowlevel_init function was still called memsetup.
41828 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
41829 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
41830 'target CPU does not support interworking' warnings on recent compilers.
41831 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
41832 indexes rather than the register definitions from the pxa-regs header
41833 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
41834 avoid any ambiguities.
41835 8. There were several redefinition warnings concerning ICMR, OSMR3,
41836 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
41837 9. The board configuration file was rather outdated.
41838 10. The part header file defined the vendor, product and revision arrays
41839 as unsigned chars instead of just chars in the block_dev_desc_t
41842 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
41844 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
41845 Author: Rune Torgersen <runet@innovsys.com>
41846 Date: Wed Oct 17 11:56:31 2007 -0500
41848 Make MPC8266ADS command selection more robust
41850 Fix MPC8266 command line definition so it won't break when new commands
41851 are added to u-boot.
41852 Signed-off-by Rune Torgersen <runet@innovsys.com>
41854 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
41855 Author: Bartlomiej Sieka <tur@semihalf.com>
41856 Date: Tue Oct 23 13:14:10 2007 +0200
41858 Motion-PRO: Update configuration to accomodate next generation board.
41860 New board has faster oscillator and a different Flash chip. This affects:
41861 - CFG_MPC5XXX_CLKIN
41863 - Flash CS configuration (timings)
41864 - Flash sector size, and thus MTD partition layout
41865 - malloc() arena size (due to bigger Flash sectors)
41866 - smaller memory test range (due to bigger malloc() arena)
41868 This patch also enables more extensive memory testing via "mtest".
41870 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
41872 commit eff501904df2bf1724a750062628ba2c51dbb1f8
41873 Author: Bartlomiej Sieka <tur@semihalf.com>
41874 Date: Tue Oct 23 11:36:07 2007 +0200
41876 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
41878 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
41879 register must be written a value of 0x00000004 as the first step of the
41880 SDRAM contorller configuration.
41882 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
41884 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
41885 Author: Peter Pearse <peter.pearse@arm.com>
41886 Date: Tue Oct 23 10:22:16 2007 +0100
41888 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
41890 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
41891 Author: Stefan Roese <sr@denx.de>
41892 Date: Tue Oct 23 10:17:42 2007 +0200
41894 ppc4xx: lwmon5: Some further GPIO config changes
41896 Signed-off-by: Stefan Roese <sr@denx.de>
41898 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
41899 Author: Vlad Lungu <vlad@comsys.ro>
41900 Date: Sun Oct 21 22:10:10 2007 +0900
41902 [MIPS] Fix UNCACHED_SDRAM
41904 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
41906 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
41907 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41909 commit 00101dd7a32d12f698150123e47e4b3420279f86
41910 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41911 Date: Sun Oct 21 21:30:42 2007 +0900
41913 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
41915 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41917 commit eb700636db017d310edaeb559b13d82588560674
41918 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41919 Date: Sun Oct 21 10:55:37 2007 +0900
41921 [MIPS] u-boot.lds: Define _gp in a standard manner
41923 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41925 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
41926 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41927 Date: Sun Oct 21 10:55:36 2007 +0900
41929 [MIPS] Fix $gp usage
41931 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
41932 As a general principle, we should use _gp for $gp.
41934 Thanks to linker script's help we fortunately have _gp which equals to
41935 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
41936 be able to access to GOT entires, global variables and procedure entry
41937 points. The right thing to do is to use _gp.
41939 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
41940 which holds the offset from _gp. When updating GOT entries, we use this
41941 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
41943 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
41944 I made some change to leave over num_got_entries.
41946 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41947 Cc: Vlad Lungu <vlad@comsys.ro>
41949 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
41950 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41951 Date: Sun Oct 21 10:55:36 2007 +0900
41953 [MIPS] u-boot.lds: Fix __got_start and __got_end
41955 Ensure that __got_start points to top of the `.got', and __got_end points
41956 to bottom as well, so that we never fail to count num_got_entries.
41958 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41960 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
41961 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41962 Date: Sun Oct 21 10:55:36 2007 +0900
41964 [MIPS] u-boot.lds: Remove duplicated .sdata section
41966 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41968 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
41969 Author: Wolfgang Denk <wd@denx.de>
41970 Date: Sun Oct 21 01:01:17 2007 +0200
41972 Minor coding style cleanup; update CHANGELOG
41974 Signed-off-by: Wolfgang Denk <wd@denx.de>
41976 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
41977 Author: Vlad Lungu <vlad@comsys.ro>
41978 Date: Thu Oct 4 20:47:10 2007 +0300
41982 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
41983 to do anything in eth_stop() if eth_init() was not called.
41984 Simplified RX path in order to avoid timeouts on really really
41985 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
41986 clever enough to cope with 1 packet per eth_rx().
41988 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
41990 commit df90968b48fb34fa9072fab150db2ac89678f537
41991 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
41992 Date: Mon Sep 24 13:32:13 2007 -0400
41994 Setting MSR[DE] in do_reset
41997 This patch ensures the soft reset of the board for the 85xx boards
41998 by setting the MSR[DE] in the do_reset function.
42000 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
42002 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
42003 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
42004 Date: Mon Sep 24 13:36:01 2007 -0400
42009 This patch fixes the MSR overwrite in the start.S when moving out of
42012 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
42014 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
42015 Author: Dan Wilson <dwilson@fulcrummicro.com>
42016 Date: Fri Oct 19 11:33:48 2007 -0500
42018 tsec driver should clear RHALT on startup
42020 This was causing problems for some people.
42022 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
42023 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
42024 Signed-off-by: Andy Fleming <afleming@freescale.com>
42026 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
42027 Author: Kumar Gala <galak@kernel.crashing.org>
42028 Date: Thu Oct 11 00:29:18 2007 -0500
42030 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
42032 On the MPC85xx CDS we have two issues:
42034 1. The device tree fixup code did not check to see if the property we are
42035 trying to update is actually found. Its possible that it would update
42036 random memory starting at 0.
42038 2. Newer Linux kernel's have moved the location of the PCI nodes to be
42039 sibilings of the soc node and not children. The explicit PATH to the PCI
42040 node would not be found for these device trees. Add the ability to handle
42041 both paths. In the future we shouldn't handle such fixups by explicit path.
42043 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42045 commit a3063eec775719b7e91023bbec3f64b3118791df
42046 Author: Kumar Gala <galak@kernel.crashing.org>
42047 Date: Thu Oct 11 00:18:48 2007 -0500
42049 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
42051 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
42052 console. Make it so we match that config what we tell Linux as the early
42055 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42057 commit e1ce3cb617bb06f91f82f98915391175addf3e82
42058 Author: Kumar Gala <galak@kernel.crashing.org>
42059 Date: Tue Oct 2 11:12:27 2007 -0500
42061 Remove magic numbers from cache related operations for mpc85xx
42063 The mpc85xx start code uses some magic numbers that we actually
42064 have #defines for in <config.h> so use those instead.
42066 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42068 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
42069 Author: Detlev Zundel <dzu@denx.de>
42070 Date: Fri Oct 19 16:47:26 2007 +0200
42074 Signed-off-by: Detlev Zundel <dzu@denx.de>
42076 commit 281df457c1aa50d2752165d0c5c3282d4027b974
42077 Author: Tony Li <tony.li@freescale.com>
42078 Date: Thu Oct 18 17:47:19 2007 +0800
42080 mpc83xx: Add configure entry for MPC83xx ATM support
42082 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
42083 Makfile and MAKEALL
42085 Signed-off-by: Tony Li <tony.li@freescale.com>
42086 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42088 commit d2646554f529a9577515eceb0ec5eceee18244ba
42089 Author: Tony Li <tony.li@freescale.com>
42090 Date: Thu Oct 18 17:44:38 2007 +0800
42092 mpc83xx: pq-mds-pib.c typo error
42094 Correct to val8 from val.
42096 Signed-off-by: Tony Li <tony.li@freescale.com>
42097 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42099 commit 3e11ae80fec1ee12194940955431186abf6009c2
42100 Author: Stefan Roese <sr@denx.de>
42101 Date: Wed Oct 17 15:40:19 2007 +0200
42103 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
42105 Signed-off-by: Stefan Roese <sr@denx.de>
42107 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
42108 Author: Jon Loeliger <jdl@freescale.com>
42109 Date: Tue Oct 16 15:27:43 2007 -0500
42111 Initial mpc8610hpcd Makefile files.
42113 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
42114 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
42115 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
42116 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42118 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
42119 Author: Jon Loeliger <jdl@freescale.com>
42120 Date: Tue Oct 16 15:26:51 2007 -0500
42122 Initial mpc8610hpcd cpu/, README and include/ files.
42124 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
42125 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
42126 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
42127 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42129 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
42130 Author: Jon Loeliger <jdl@freescale.com>
42131 Date: Tue Oct 16 13:54:01 2007 -0500
42133 Initial mpc8610hpcd board files.
42135 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
42136 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
42137 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
42138 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42140 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
42141 Author: runet@innovsys.com <runet@innovsys.com>
42142 Date: Tue Oct 16 14:50:40 2007 -0500
42144 Make MPC8266ADS board compile again.
42146 Signed-off-by: Runet Torgersen <runet@innovsys.com>
42148 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
42149 Author: Jon Loeliger <jdl@freescale.com>
42150 Date: Mon Aug 27 12:41:03 2007 -0500
42152 86xx: Allow for fewer DDR slots per memory controller.
42154 As a direct correlation exists between DDR DIMM slots
42155 and SPD EEPROM addresses used to configure them, use
42156 the individually defined SPD_EEPROM_ADDRESS* values to
42157 determine if a DDR DIMM slot should have its SPD
42158 configuration read or not.
42160 Effectively, this now allows for 1 or 2 DIMM slots
42161 per memory controller.
42163 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42165 commit 4d4a945e189a2f384c66432316da2788a0ac1607
42166 Author: Rodolfo Giometti <giometti@enneenne.com>
42167 Date: Mon Oct 15 11:59:17 2007 +0200
42169 PXA USB OHCI: "usb stop" implementation.
42171 Some USB keys need to be switched off before loading the kernel
42172 otherwise they can remain in an undefined status which prevents them
42173 to be correctly recognized by the kernel.
42175 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
42177 commit e2e93442e558cf1500e92861f99713b2f045ea22
42178 Author: Stefan Roese <sr@denx.de>
42179 Date: Mon Oct 15 11:39:00 2007 +0200
42181 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
42183 The I2C bootstrap values that can be setup via the "bootstrap" command,
42184 were setup incorrect regarding the generation of the internal sync PCI
42185 clock. The values for PLB clock == 133MHz were slighly incorrect and the
42186 values for PLB clock == 166MHz were totally incorrect. This could
42187 lead to a hangup upon booting while PCI configuration scan.
42189 This patch fixes this issue and configures valid PCI divisor values
42190 for the sync PCI clock, with respect to the provided external async
42193 Here the values of the formula in the chapter 14.2 "PCI clocking"
42194 from the 440EPx users manual:
42196 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
42198 33MHz async PCI frequency:
42200 => 32 <= 44.3 <= 65 (div = 3)
42203 => 32 <= 55.3 <= 65 (div = 3)
42205 66MHz async PCI frequency:
42207 => 65 <= 66.5 <= 132 (div = 2)
42210 => 65 <= 83 <= 132 (div = 2)
42212 Signed-off-by: Stefan Roese <sr@denx.de>
42214 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
42215 Author: Stefan Roese <sr@denx.de>
42216 Date: Mon Oct 15 11:29:33 2007 +0200
42218 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
42220 The BCSR status bit for the 66MHz PCI operation was correctly
42221 addressed (MSB/LSB problem). Now the correct currently setup
42222 PCI frequency is displayed upon bootup.
42224 This patch also fixes this problem on Rainier & Yellowstone, since these
42225 boards use the same souce code as Sequoia & Yosemite do.
42227 Signed-off-by: Stefan Roese <sr@denx.de>
42229 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
42230 Author: Martin Krause <martin.krause@tqs.de>
42231 Date: Wed Sep 26 17:55:56 2007 +0200
42233 TQM860M: adjust for doubled flash sector size.
42235 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
42236 doubled sector size.
42238 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42240 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
42241 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
42242 Date: Wed Sep 26 17:55:54 2007 +0200
42244 TQM8xx: Fix CAN timing.
42246 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42248 commit d43e489baf02afae49077791fb22332d240d8656
42249 Author: Martin Krause <martin.krause@tqs.de>
42250 Date: Thu Sep 27 14:54:36 2007 +0200
42252 TQM866M: fix SDRAM refresh
42254 At 133 MHz the current SDRAM refresh rate is too fast
42255 (measured 4 * 1.17 us).
42256 CFG_MAMR_PTA changes from 39 to 97. This result
42257 in a refresh rate of 4 * 7.8 us at the default clock
42258 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
42259 This is a compromise until a new method is found to
42260 adjust the refresh rate.
42262 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42264 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
42265 Author: Martin Krause <martin.krause@tqs.de>
42266 Date: Wed Sep 26 17:55:55 2007 +0200
42268 TQM866M: adjust for doubled flash sector size.
42270 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
42271 doubled sector size.
42273 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42275 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
42276 Author: Michal Simek <monstr@monstr.eu>
42277 Date: Sun Oct 14 16:12:29 2007 +0200
42279 [FIX] XUPV2P change command handling
42280 and remove code violation
42282 commit 636400198228d96983c06657b17f760f5989958e
42283 Author: Wolfgang Denk <wd@denx.de>
42284 Date: Sun Oct 14 00:13:19 2007 +0200
42286 Prepare for 1.3.0-rc3 release
42288 Signed-off-by: Wolfgang Denk <wd@denx.de>
42290 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
42291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42292 Date: Sat Sep 29 13:41:37 2007 +0200
42294 Fix warning differ in signedness in cpu/pxa/mmc.c
42296 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42298 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
42299 Author: Wolfgang Denk <wd@denx.de>
42300 Date: Sat Oct 13 23:51:14 2007 +0200
42302 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
42304 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42305 Signed-off-by: Wolfgang Denk <wd@denx.de>
42307 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
42308 Author: Wolfgang Denk <wd@denx.de>
42309 Date: Sat Oct 13 21:15:39 2007 +0200
42311 Coding Style cleanup.
42313 Signed-off-by: Wolfgang Denk <wd@denx.de>
42315 commit e1893815b0999410d7a327589611c7b38e95299e
42316 Author: Wolfgang Denk <wd@denx.de>
42317 Date: Fri Oct 12 15:49:39 2007 +0200
42319 GP3 SSA: enable RTC
42321 Signed-off-by: Wolfgang Denk <wd@denx.de>
42323 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
42324 Author: Grzegorz Bernacki <gjb@semihalf.com>
42325 Date: Tue Oct 9 13:58:24 2007 +0200
42327 [ads5121] EEPROM support added.
42329 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42331 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
42332 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
42333 Date: Sat Oct 6 18:55:35 2007 +0200
42335 AVR32: Initialize bi_flash* in board_init_r
42337 The ATSTK1000-specific flash driver intializes bi_flashstart,
42338 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
42341 Initialize these in board_init_r instead so that things will still be
42342 set up correctly when we switch to the CFI driver.
42344 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42346 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
42347 Author: Marian Balakowicz <m8@semihalf.com>
42348 Date: Fri Oct 5 10:40:54 2007 +0200
42350 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
42352 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
42354 commit 92869195ef8210758d2176230c0a36897afd50ed
42355 Author: Bartlomiej Sieka <tur@semihalf.com>
42356 Date: Fri Oct 5 09:46:06 2007 +0200
42358 CM5200: Fix missing null-termination in hostname manipulation code
42360 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
42362 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
42363 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
42364 Date: Tue Oct 2 19:09:01 2007 +0200
42366 Fix memtest breakage
42368 CFG_MEMTEST_START uses weird magic involving gd, which fails to
42369 compile. Use hardcoded values instead (we actually know how much RAM
42372 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42374 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
42375 Author: Stefan Roese <sr@denx.de>
42376 Date: Tue Oct 2 11:44:46 2007 +0200
42378 ppc4xx: Coding style cleanup
42380 Signed-off-by: Stefan Roese <sr@denx.de>
42382 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
42383 Author: Stefan Roese <sr@denx.de>
42384 Date: Tue Oct 2 11:44:19 2007 +0200
42386 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
42388 Signed-off-by: Stefan Roese <sr@denx.de>
42390 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
42391 Author: Grzegorz Bernacki <gjb@semihalf.com>
42392 Date: Mon Oct 1 09:51:50 2007 +0200
42394 Program EPLD to force full duplex mode for PHY.
42396 EPLD forces modes of PHY operation. By default full duplex is turned off.
42397 This fix turns it on.
42399 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42401 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
42402 Author: Timo Ketola <timo.ketola@exertus.fi>
42403 Date: Mon Sep 24 14:50:32 2007 +0300
42405 Bugfix: Use only one PTD for one endpoint
42407 Original isp116x-hcd code prepared multiple PTDs for longer than 16
42408 byte transfers for one endpoint. That is unnecessary because the
42409 ISP116x is able to split long data from one PTD into multiple
42410 transactions based on the buffer size of the endpoint. It also caused
42411 serious problems if the endpoint NAKed some of the transactions. In
42412 that case ISP116x wouldn't notice that the other PTDs were for the same
42413 endpoint and would try the other PTDs possibly out of order. That would
42414 break the whole transfer.
42416 This patch makes isp116x_submit_job to use one PTD for one transfer.
42418 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
42419 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42421 commit 86ec86c04326c3913178a7679aa910de071da75d
42422 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42423 Date: Thu Sep 27 23:27:47 2007 +0200
42425 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
42427 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42429 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
42430 Author: Stefan Roese <sr@denx.de>
42431 Date: Tue Sep 11 14:12:55 2007 +0200
42433 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
42435 Signed-off-by: Stefan Roese <sr@denx.de>
42437 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
42438 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
42439 Date: Wed Sep 26 16:35:54 2007 -0500
42441 85xx io out functions need sync after write.
42443 This fixes the mc146818 rtc_read/write functions for 85xx.
42445 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
42447 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
42448 Author: Grant Likely <grant.likely@secretlab.ca>
42449 Date: Tue Sep 25 15:48:05 2007 -0600
42451 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
42453 CFG_FPGA_XILINX is a bit value used to test against the value in
42454 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
42455 think that is the intention in this code.
42457 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42459 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
42460 Author: Michal Simek <monstr@monstr.eu>
42461 Date: Mon Sep 24 00:41:30 2007 +0200
42463 [FIX] change command handling and removing code violation
42465 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
42466 Author: Michal Simek <monstr@monstr.eu>
42467 Date: Mon Sep 24 00:36:06 2007 +0200
42469 [FIX] change sets of commands
42470 because changing of command handling brings
42471 compilation problems
42473 commit cb1bc63b75a232571eb69aa2c8aa919321655845
42474 Author: Michal Simek <monstr@monstr.eu>
42475 Date: Mon Sep 24 00:30:42 2007 +0200
42477 [FIX] Email reparation & Copyright
42478 Both codes are written by myself without any
42481 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
42482 Author: Michal Simek <monstr@monstr.eu>
42483 Date: Mon Sep 24 00:25:11 2007 +0200
42485 [PATCH] Change macro name for UartLite
42486 because PowerPC 405 can use UartLite as console
42488 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
42489 Author: Michal Simek <monstr@monstr.eu>
42490 Date: Mon Sep 24 00:21:19 2007 +0200
42492 [PATCH] Add support for design without interrupt controller
42495 commit 0731933ec8ec45d02ba89b52df673d526873cdde
42496 Author: Michal Simek <monstr@monstr.eu>
42497 Date: Mon Sep 24 00:19:48 2007 +0200
42499 [FIX] resolve problem with cpu without barrel shifter
42501 commit db14d77995ce515b728b178b63f82babe60e3d56
42502 Author: Michal Simek <monstr@monstr.eu>
42503 Date: Mon Sep 24 00:18:46 2007 +0200
42505 [FIX] repair email address
42507 commit 481d4328618804add1f818a6c96296121cd0528e
42508 Author: Michal Simek <monstr@monstr.eu>
42509 Date: Mon Sep 24 00:17:42 2007 +0200
42511 [FIX] repair MFSL commands
42513 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
42514 Author: Michal Simek <monstr@monstr.eu>
42515 Date: Mon Sep 24 00:08:37 2007 +0200
42517 synchronizition with mainline
42519 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
42520 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42521 Date: Sun Sep 23 02:42:38 2007 +0900
42523 sh: Add support command of ide with sh
42525 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42527 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
42528 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42529 Date: Sun Sep 23 02:38:42 2007 +0900
42531 sh: Update Makefile
42533 Add support MS7722SE01 to Makefile.
42535 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42537 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
42538 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42539 Date: Sun Sep 23 02:31:13 2007 +0900
42541 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
42543 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42545 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
42546 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42547 Date: Sun Sep 23 02:19:24 2007 +0900
42549 sh: Update MS7750SE01 platform
42551 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42553 commit 516ad760db3553766267ada01b7d5d727faa4bbd
42554 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42555 Date: Sun Sep 23 02:17:08 2007 +0900
42557 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
42559 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42561 commit b02bad128669e567fce87d8df823b06a0144b8db
42562 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42563 Date: Sun Sep 23 02:12:30 2007 +0900
42565 sh: Update core code of SuperH.
42567 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42569 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
42570 Author: Wolfgang Denk <wd@denx.de>
42571 Date: Thu Sep 20 00:04:14 2007 +0200
42575 Signed-off-by: Wolfgang Denk <wd@denx.de>
42577 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
42578 Author: Wolfgang Denk <wd@denx.de>
42579 Date: Tue Sep 18 21:36:35 2007 +0200
42581 Avoid compiler warning.
42583 Signed-off-by: Wolfgang Denk <wd@denx.de>
42585 commit 8a783a65851bc7421ab69f442261215e21b8891a
42586 Author: Grant Likely <grant.likely@secretlab.ca>
42587 Date: Tue Sep 18 12:24:57 2007 -0600
42589 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
42591 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
42592 nulls in a string differently. For example, the following statement:
42593 echo "this is a string\0" > afile
42594 Will produce the following with /bin/bash:
42595 "this is a string\0"
42596 But with /bin/dash, will produce:
42599 Bug fixed by moving the embedded null out of the makefile and into the
42600 config header. Also renamed the macro to avoid usage colision with the same
42601 macro used by other board ports.
42603 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42605 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
42606 Author: Wolfgang Denk <wd@denx.de>
42607 Date: Tue Sep 18 17:40:27 2007 +0200
42609 MCC200: fix build warning
42611 The MCC200 board config file includes version.h for some customer-
42612 specific setting, which causes warnings with "make depend"; build
42613 version.h before depend.
42615 Signed-off-by: Wolfgang Denk <wd@denx.de>
42617 commit bd86220f58b99d6896198c385fda132f0c980915
42618 Author: Peter Pearse <peter.pearse@arm.com>
42619 Date: Tue Sep 18 13:07:54 2007 +0100
42621 Move coloured led API to status_led.h
42622 Improve indentation in drivers/at45.c
42624 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
42625 Author: Eirik Aanonsen <eaa@wprmedical.com>
42626 Date: Tue Sep 18 08:47:20 2007 +0200
42628 Update atstk1002 bootargs.
42630 Updates to atstk1002 U-Boot header file:
42631 - Changed bootargs:
42632 * Set the bootargs for at1002 to point to the SD-card partition instead
42633 * ... of the boot flash.
42634 * Removing the rootfstype since that argument are not needed.
42636 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
42637 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42639 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
42640 Author: Eirik Aanonsen <eaa@wprmedical.com>
42641 Date: Wed Sep 12 13:32:37 2007 +0200
42643 Add some comments to clocks in atstk1002.h
42645 This patch applies some clarifying comments to how the different
42646 clocks are setup according to atstk1002.h Some of the previous
42647 comments where stating wrongful information.
42649 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42651 commit 97213f32416ead885deafea86774e912ffd60ad0
42652 Author: David Saada <David.Saada@ecitele.com>
42653 Date: Mon Sep 17 17:04:47 2007 +0200
42655 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
42657 Signed-off-by: David Saada <david.saada@ecitele.com>
42659 commit 30363e98fa470fbecea5e8bc0f1443352754f303
42660 Author: Stefan Roese <sr@denx.de>
42661 Date: Mon Sep 17 08:20:47 2007 +0200
42663 Small whitespace cleanup of OneNAND patch
42665 Signed-off-by: Stefan Roese <sr@denx.de>
42667 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
42668 Author: Kyungmin Park <kmpark@infradead.org>
42669 Date: Mon Sep 10 17:15:14 2007 +0900
42671 OneNAND support (take #2)
42673 [PATCH 3/3] OneNAND support (take #2)
42675 OneNAND support at U-Boot
42677 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
42679 commit 17aa2800457df0c06b41516f46f126712c196219
42680 Author: Kyungmin Park <kmpark@infradead.org>
42681 Date: Mon Sep 10 17:14:34 2007 +0900
42683 OneNAND support (take #2)
42685 [PATCH 2/3] OneNAND support (take #2)
42687 OneNAND support at U-Boot
42689 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
42691 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
42692 Author: Kyungmin Park <kmpark@infradead.org>
42693 Date: Mon Sep 10 17:13:49 2007 +0900
42695 OneNAND support (take #2)
42697 [PATCH 1/3] OneNAND support (take #2)
42699 OneNAND support at U-Boot
42701 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
42703 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
42704 Author: Michal Simek <monstr@monstr.eu>
42705 Date: Sun Sep 16 20:51:57 2007 +0200
42707 [FIX] remove files form repository
42709 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
42710 Author: Wolfgang Denk <wd@denx.de>
42711 Date: Sun Sep 16 17:10:04 2007 +0200
42713 TQM8xx[LM]: Fix broken environment alignment.
42715 With recent toolchains, the environment sectors were no longer aligned to
42716 sector boundaries. The reason was a combination of two bugs:
42718 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
42719 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
42720 this gets defined, is not included here (and cannot be included
42721 without causing lots of problems).
42723 Added a new #define CFG_USE_PPCENV for all boards which really
42724 want to put the environment is a ".ppcenv" section.
42726 2) The linker scripts just include environment.o, silently assuming
42727 that the objects in that file are really in the order in which
42728 they are coded in the C file, i. e. "environment" first, then
42729 "redundand_environment", and "env_size" last. However, current
42730 toolchains (GCC-4.x) reorder the objects, causing the environment
42731 data not to start on a flash sector boundary:
42733 Instead of: we got:
42735 40008000 T environment 40008000 T env_size
42736 4000c000 T redundand_environment 40008004 T redundand_environment
42737 40010000 T env_size 4000c004 T environment
42739 Note: this patch fixes just the first part, and cures the alignment
42740 problem by making sure that "env_size" gets placed correctly. However,
42741 we still have a potential issue because primary and redundant
42742 environment sectors are actually swapped, i. e. we have now:
42744 40008000 T redundand_environment
42745 4000c000 T environment
42746 40010000 T env_size
42748 This shall be fixed in the next version.
42750 Signed-off-by: Wolfgang Denk <wd@denx.de>
42752 commit eb6da8050797c204c9d010548424186c7ce32fc1
42753 Author: Wolfgang Denk <wd@denx.de>
42754 Date: Sun Sep 16 02:39:35 2007 +0200
42756 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
42758 Signed-off-by: Wolfgang Denk <wd@denx.de>
42760 commit cd2d1602c54cc6957bdef3872272a4b264893960
42761 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
42762 Date: Mon Sep 10 14:54:56 2007 -0400
42766 Fixup for the break statement in wrong place.
42768 [Patch by urwithsughosh@gmail.com]
42769 Acked-by: Andy Fleming <afleming@freescale.com>
42770 Signed-off-by: Wolfgang Denk <wd@denx.de>
42772 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
42773 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42774 Date: Tue Sep 11 17:04:00 2007 +0200
42776 Fix do_div() usage in nand process output
42778 Fix usage of do_div() in nand erase|read|write process output.
42780 The last patch to nand_util.c introduced do_div() instead of libgcc's
42781 implementation. But do_div() returns the quotient in its first
42782 macro parameter and not as result.
42784 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42786 commit c750d2e6692a000a82f29de7bf24e3dc21239161
42787 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42788 Date: Wed Sep 12 12:36:53 2007 +0200
42790 NAND: Add CFG_NAND_QUIET option
42792 This config option sets the default for the progress information
42793 output behavior that can also be configured through the 'quiet'
42794 environment variable.
42796 The legacy NAND code does not print the current progress info
42797 on the console. So this option is for backward compatibility for
42798 units that are in the field and where setting the quiet variable
42799 is not an option. With CFG_NAND_QUIET set to '1' the console
42800 progress info is turned off. This can still be overwritten
42801 through the environment variable.
42803 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42805 commit dcb88630290d2bcd803386dd4c2be73142994c4f
42806 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
42807 Date: Thu Sep 13 16:06:05 2007 -0700
42809 ColdFire: fix build error becasue of bad type of mii_init()
42811 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
42813 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
42814 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
42815 Date: Thu Sep 13 16:04:05 2007 -0700
42817 ColdFire: Fix build error caused by pixis.c
42819 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
42821 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
42823 commit e21659e30660a1377c42af135a6114efe39801d9
42824 Author: Sam Sparks <SSparks@twacs.com>
42825 Date: Fri Sep 14 11:14:42 2007 -0600
42827 Update MPC8349ITX*_config to place config.tmp in right place.
42829 MPC834ITX*_config does not store config.tmp at the correct locatation,
42830 causing MPC8349ITXGP to have the wrong TEXT_BASE.
42832 Signed-off-by: Sam Sparks <SSparks@twacs.com>
42833 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42835 commit 1218abf1b5817a39a82399b4b928b00750575bda
42836 Author: Wolfgang Denk <wd@denx.de>
42837 Date: Sat Sep 15 20:48:41 2007 +0200
42839 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
42841 Signed-off-by: Wolfgang Denk <wd@denx.de>
42843 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
42844 Author: Dirk Behme <dirk.behme@googlemail.com>
42845 Date: Sat Sep 15 11:55:42 2007 +0200
42847 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
42849 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
42852 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
42854 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
42856 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
42857 Author: Michal Simek <monstr@monstr.eu>
42858 Date: Sat Sep 15 00:03:35 2007 +0200
42860 Synchronize with U-BOOT mainline
42862 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
42863 Author: Sam Sparks <SSparks@twacs.com>
42864 Date: Fri Sep 14 11:14:42 2007 -0600
42866 Update MPC8349ITX*_config to place config.tmp in right place.
42868 MPC834ITX*_config does not store config.tmp at the correct locatation,
42869 causing MPC8349ITXGP to have the wrong TEXT_BASE.
42871 Signed-off-by: Sam Sparks <SSparks@twacs.com>
42872 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42873 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42875 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
42876 Author: Bartlomiej Sieka <tur@semihalf.com>
42877 Date: Thu Sep 13 18:21:48 2007 +0200
42879 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
42881 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
42883 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
42884 Author: Bartlomiej Sieka <tur@semihalf.com>
42885 Date: Thu Sep 13 16:33:59 2007 +0200
42887 tqm5200: Restore customary env. variable boot commands for powerpc kernels
42889 - update default definitions of kernel_addr and fdt_addr env. variables
42890 - make arch/powerpc booting the default scenario
42891 - update MTD partition layout to match the above
42893 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
42895 commit f34024d4a328e6edd906456da98d2c537155c4f7
42896 Author: Wolfgang Denk <wd@denx.de>
42897 Date: Wed Sep 12 00:48:57 2007 +0200
42899 Fix memory corruption problem on STX GP3 SSA Board.
42901 Signed-off-by: Wolfgang Denk <wd@denx.de>
42903 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
42904 Author: Peter Pearse <peter.pearse@arm.com>
42905 Date: Tue Sep 11 15:35:01 2007 +0100
42909 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
42910 Author: Grzegorz Bernacki <gjb@semihalf.com>
42911 Date: Tue Sep 11 15:42:11 2007 +0200
42913 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
42914 scan on second pci bus.
42916 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42918 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
42919 Author: Grzegorz Bernacki <gjb@semihalf.com>
42920 Date: Tue Sep 11 12:57:52 2007 +0200
42922 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
42924 Bamboo has a file sdram.c which needs special treatment when building in
42925 separate directory. It has to be linked to build directory otherwise it is
42928 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42930 commit d45963854eff39d575124d859419bb4953ce2c87
42931 Author: Michal Simek <monstr@monstr.eu>
42932 Date: Tue Sep 11 00:37:04 2007 +0200
42934 [FIX] Microblaze ML401 - repare FLASH handling
42936 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
42937 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
42938 Date: Mon Sep 10 16:55:59 2007 +0100
42940 Allocate CPU Architecture Code for STMicroelectronics' ST200.
42942 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
42943 ---------------------------------------------------
42945 commit 754bac48156f8958d8f6a53a51eda88ab5758929
42946 Author: Wolfgang Denk <wd@denx.de>
42947 Date: Mon Sep 10 20:42:31 2007 +0200
42949 Update version to match current state.
42951 Signed-off-by: Wolfgang Denk <wd@denx.de>
42953 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
42954 Author: Grzegorz Bernacki <gjb@semihalf.com>
42955 Date: Mon Sep 10 17:39:08 2007 +0200
42957 [MPC512x] Streamline frame handling in the FEC driver
42959 - convert frame size settings to be derived from a single base
42960 - set frame size to the recommended default value
42962 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42964 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
42965 Author: Kyungmin Park <kmpark@infradead.org>
42966 Date: Mon Sep 10 11:34:00 2007 +0900
42968 Remove compiler warning: target CPU does not support interworking
42970 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
42972 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
42973 Author: Wolfgang Denk <wd@denx.de>
42974 Date: Sun Sep 9 21:21:33 2007 +0200
42976 Fix compile error in spc1920 config.
42978 Signed-off-by: Markus Klotzbücher <mk@denx.de>
42979 Signed-off-by: Wolfgang Denk <wd@denx.de>
42981 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
42982 Author: Grant Likely <grant.likely@secretlab.ca>
42983 Date: Fri Sep 7 09:25:07 2007 -0600
42985 Bugfix: make bootm+libfdt compile on boards with no flash
42987 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42989 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
42990 Author: Grzegorz Bernacki <gjb@semihalf.com>
42991 Date: Fri Sep 7 18:35:37 2007 +0200
42993 [PPC440SPe] PCIe environment settings for Katmai and Yucca
42995 - 'pciconfighost' is set by default in order to be able to scan bridges
42996 behind the primary host/PCIe
42998 - 'pciscandelay' env variable is recognized to allow for user-controlled
42999 delay before the PCIe bus enumeration; some peripheral devices require a
43000 significant delay before they can be scanned (e.g. LSI8408E); without the
43001 delay they are not detected
43003 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
43005 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
43006 Author: Grzegorz Bernacki <gjb@semihalf.com>
43007 Date: Fri Sep 7 18:20:23 2007 +0200
43009 [PPC440SPe] Improve PCIe configuration space access
43011 - correct configuration space mapping
43012 - correct bus numbering
43013 - better access to config space
43015 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
43016 first device on the first bus. We now allow to configure up to 16 buses;
43017 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
43018 peripheral devices farther in hierarchy can be identified.
43020 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
43022 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
43023 Author: Grzegorz Bernacki <gjb@semihalf.com>
43024 Date: Fri Sep 7 17:46:18 2007 +0200
43026 [PPC440SPe] Convert machine check exceptions handling
43028 Convert using fixup mechanism to suppressing MCK for the duration of config
43029 read/write transaction: while fixups work fine with the case of a precise
43030 exception, we identified a major drawback with this approach when there's
43031 an imprecise case. In this scenario there is the following race condition:
43032 the fixup is (by design) set to catch the instruction following the one
43033 actually causing the exception; if an interrupt (e.g. decrementer) happens
43034 between those two instructions, the ISR code is executed before the fixup
43035 handler the machine check is no longer protected by the fixup handler as it
43036 appears as within the ISR code. In consequence the fixup approach is being
43037 phased out and replaced with explicit suppressing of MCK during a PCIe
43038 config read/write cycle.
43040 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
43042 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
43043 Author: Wolfgang Denk <wd@denx.de>
43044 Date: Fri Sep 7 17:43:36 2007 +0200
43046 Fix typo in MAKEALL script.
43048 Signed-off-by: Wolfgang Denk <wd@denx.de>
43050 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
43051 Author: Grzegorz Bernacki <gjb@semihalf.com>
43052 Date: Fri Sep 7 17:09:21 2007 +0200
43054 [MPC512x] Proper handling of larger frames in the FEC driver
43056 When frame larger than local RX buffer is received, it is split and handled
43057 by two buffer descriptors. Prior to this patch the FEC driver discarded
43058 contents of a buffer descriptor without the 'LAST' bit set, so the first
43059 part of the frame was lost in case of larger frames. This fix allows to
43060 safely combine the two pieces into the whole frame.
43062 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
43064 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
43065 Author: Rafal Jaworowski <raj@semihalf.com>
43066 Date: Fri Sep 7 17:05:36 2007 +0200
43068 [MPC512x] Correct fixup relocation
43070 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
43072 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
43073 Author: Wolfgang Denk <wd@denx.de>
43074 Date: Fri Sep 7 01:21:25 2007 +0200
43076 Update CHANGELOG, minor coding style cleanup.
43078 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
43079 Author: stefano babic <sbabic@denx.de>
43080 Date: Thu Aug 30 23:01:49 2007 +0200
43082 PXA270: Added support for TrizepsIV board.
43084 This patch add support for the Trizeps IV module (520Mhz).
43086 Signed-off-by: Stefano Babic <sbabic@denx.de>
43088 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
43089 Author: stefano babic <sbabic@denx.de>
43090 Date: Thu Aug 30 22:57:04 2007 +0200
43092 PXA270: Add support for multiple serial ports.
43094 This patch adds support for multiple serial ports to the PXA target.
43095 FFUART, BTUART and STUART are supported.
43097 Signed-off-by: Stefano Babic <sbabic@denx.de>
43099 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
43100 Author: stefano babic <sbabic@denx.de>
43101 Date: Thu Aug 30 22:48:47 2007 +0200
43103 PXA270: fix compile issue (invalid lvalue)
43105 Code is broken for PXA270 due to "invalid lvalue in assignment".
43107 This patch fix it in pxa-regs.h
43109 Signed-off-by: Stefano Babic <sbabic@denx.de>
43111 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
43112 Author: Jason Jin <Jason.jin@freescale.com>
43113 Date: Thu Aug 30 18:19:05 2007 +0800
43115 Add BUILD_DIR support for bios emulator.
43117 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
43119 commit b4d8a55145442f136982634862341a3e02002bda
43120 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43121 Date: Fri Aug 31 14:41:51 2007 +0900
43123 [MIPS] Remove inline asm string functions
43125 Stop using inline string functions on MIPS as other ARCHs do so,
43126 since the optimized inline asm versions are not small.
43128 This change is triggered by a following MIPS build error:
43129 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
43130 common/exports.c:32: undefined reference to `strcmp'
43131 make: *** [u-boot] Error 1
43133 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43135 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
43136 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43137 Date: Fri Aug 31 14:41:45 2007 +0900
43139 [MIPS] Update asm string header
43141 This patches contains several bugfixes and cleanups in the latest upstream:
43143 - Don't include linux/config.h
43144 - Remove buggy inline version of memscan.
43145 - Merge with Linux 2.6.11-rc3.
43146 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
43147 - Goodbye mips64. 31704 lines of code bite the dust.
43148 - Replace extern inline with static inline.
43149 - Fix return value of strncpy.
43150 - Remove a bunch more "$1" clobbers.
43152 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43154 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
43155 Author: Bartlomiej Sieka <tur@semihalf.com>
43156 Date: Tue Sep 4 17:31:22 2007 +0200
43158 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
43160 Fix incorrect blob address calculation in do_bootm_linux() that prevents
43161 booting the kernel from a multi-file image (kernel + initrd + blob).
43163 Also, make minor updates to the U-Boot's output and to the coding style.
43165 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
43167 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
43168 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
43169 Date: Fri Aug 31 14:29:04 2007 +0200
43171 Add support for Sil680 IDE controller.
43173 o add drivers/sil680.c to support the Sil680 IDE-controller.
43174 o drivers/Makefile: add sil680.o.
43176 Signed-off-by: Gary Jennejohn <garyj@denx.de>
43178 commit e79021223bc339df655e360645a52c457a74b067
43179 Author: Grant Likely <grant.likely@secretlab.ca>
43180 Date: Thu Sep 6 09:47:40 2007 -0600
43182 bootm/fdt: Only process the fdt if an fdt address was provided
43184 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
43185 kernels using the board info structure (instead of passing a device tree)
43186 This change allows the old style booting to be used if the fdt argument
43187 was not passed to 'bootm'.
43189 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
43190 Acked-by: Kim Phillips <kim.phillips@freescale.com>
43192 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
43193 Author: Grant Likely <grant.likely@secretlab.ca>
43194 Date: Thu Sep 6 09:46:23 2007 -0600
43196 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
43198 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
43200 Tested on: lite5200b
43202 Note: the fixup functions have not been moved to a common place. This
43203 patch is targeted for immediate merging as in solves a build issue, but
43204 the final name/location of the fixups is still subject to debate. I
43205 propose to merge this now, and move the fixups in the next merge window
43206 to be usable by all targets.
43208 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
43210 commit 41bb76e941929f54a73206fb132f7a4c275543a3
43211 Author: Grant Likely <grant.likely@secretlab.ca>
43212 Date: Thu Sep 6 09:46:17 2007 -0600
43214 libfdt: add convenience function fdt_find_and_setprop()
43216 Given the path to a node, fdt_find_and_setprop() allows a property value
43217 to be set directly.
43219 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
43221 commit 80767a6cead9990d9e77e62be947843c2c72f469
43222 Author: Peter Pearse <peter.pearse@arm.com>
43223 Date: Wed Sep 5 16:04:41 2007 +0100
43225 Changed API name to coloured_led.h
43226 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
43227 Tidied other cpu/arm920t/start.S code
43229 commit 56a9270521baaa00e12639a978302a67f61ef060
43230 Author: Kumar Gala <galak@kernel.crashing.org>
43231 Date: Thu Aug 30 16:18:18 2007 -0500
43233 Fix ULI RTC support on MPC8544 DS
43235 The RTC on the M1575 ULI chipset requires a dummy read before
43236 we are able to talk to the RTC. We accomplish this by adding a
43237 second memory region to the PHB the ULI is on and read from it.
43239 The second region is added to maintain compatiabilty with Linux's
43240 view of the PCI memory map.
43242 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43244 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
43245 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
43246 Date: Thu Aug 30 01:58:48 2007 -0500
43248 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
43250 pcie is now differentiated from pci. Add 8641 bus-range updates.
43252 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43254 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
43255 Author: Peter Pearse <peter.pearse@arm.com>
43256 Date: Tue Sep 4 16:18:38 2007 +0100
43258 Add coloured led interface for ARM boards.
43259 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
43261 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
43262 Author: Peter Pearse <peter.pearse@arm.com>
43263 Date: Tue Sep 4 14:49:28 2007 +0100
43265 Move include/led.h to board/at91rm9200dk
43267 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
43268 Author: Peter Pearse <peter.pearse@arm.com>
43269 Date: Tue Sep 4 14:25:51 2007 +0100
43271 Ran Lindent on drivers/at45.c
43273 commit 557ab89d294f08dd532f21d19861b40093200a33
43274 Author: Peter Pearse <peter.pearse@arm.com>
43275 Date: Tue Sep 4 14:23:50 2007 +0100
43277 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
43279 commit 81b73dec16fd1227369a191e725e10044a9d56b8
43280 Author: Gary Jennejohn <garyj@denx.de>
43281 Date: Fri Aug 31 15:21:46 2007 +0200
43283 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
43285 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
43286 set to non-zero, because it doesn't support MRM (memory-read-
43287 multiple) correctly. We now added the possibility to configure
43288 this register in the board config file, so that the default value
43289 of 8 can be overridden.
43291 Here the details of this patch:
43293 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
43294 board-specific settings. As an example the sequoia board requires 0.
43295 Idea from Stefan Roese <sr@denx.de>.
43296 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
43297 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
43298 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
43299 CFG_PCI_CACHE_LINE_SIZE to 0.
43301 Signed-off-by: Gary Jennejohn <garyj@denx.de>
43302 Signed-off-by: Stefan Roese <sr@denx.de>
43304 commit 60174746c668b309378a91488dded898e9553eae
43305 Author: Wolfgang Denk <wd@denx.de>
43306 Date: Fri Aug 31 10:01:51 2007 +0200
43308 Fix TFTP OACK code for short packets.
43310 The old code had a loop limit overflow bug which caused a semi-
43311 infinite loop for small packets, because in "i<len-8", "i" was signed,
43312 but "len" was unsigned, and "len-8" became a huge number for small
43315 This is a workaround which replaces broken commit 8f1bc284.
43317 Signed-off-by: Wolfgang Denk <wd@denx.de>
43319 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
43320 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
43321 Date: Thu Aug 30 15:03:05 2007 +0200
43323 Reduce BOOTDELAY variable to 1 second by default for STK1002
43325 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
43326 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43328 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
43329 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
43330 Date: Thu Aug 30 15:03:04 2007 +0200
43332 Remove double quotation marks around MAC address for STK1002
43334 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
43335 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43337 commit ff13ac8c7bbebb238e339592de765c546dba1073
43338 Author: Wolfgang Denk <wd@denx.de>
43339 Date: Thu Aug 30 14:42:15 2007 +0200
43341 Backout commit 8f1bc284 as it causes TFTP to fail.
43343 Signed-off-by: Wolfgang Denk <wd@denx.de>
43345 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
43346 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
43347 Date: Thu Aug 30 02:26:17 2007 -0500
43349 Revert "Fix MPC8544DS PCIe3 scsi."
43351 This reverts commit 9468e680.
43352 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
43354 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43356 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
43357 Author: Grant Likely <grant.likely@secretlab.ca>
43358 Date: Wed Aug 29 18:26:24 2007 -0600
43360 tftp: don't implicity trust the format of recevied packets
43362 The TFTP OACK code trusts that the incoming packet is formated as
43363 ASCII text and can be processed by string functions. It also has a
43364 loop limit overflow bug where if the packet length is less than 8, it
43365 ends up looping over *all* of memory to find the 'blksize' string.
43367 This patch solves the problem by forcing the packet to be null
43368 terminated and using strstr() to search for the sub string.
43370 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
43372 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
43373 Author: Stefan Roese <sr@denx.de>
43374 Date: Wed Aug 29 16:31:18 2007 +0200
43376 ppc4xx: Change lwmon5 default environment to support Linux RTC
43378 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
43379 to supply the RTC I2C address as bootline parameter. This patch
43380 adds support for this rtc probing parameter to the bootargs:
43382 "rtc-pcf8563.probe=0,0x51"
43384 Signed-off-by: Stefan Roese <sr@denx.de>
43386 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
43387 Author: Kim Phillips <kim.phillips@freescale.com>
43388 Date: Wed Aug 29 09:06:05 2007 -0500
43390 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
43392 this had slipped through the cracks, since the sbc board was added
43393 after I wrote the original patch to remove all these symbols, and
43394 before it was merged.
43396 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43398 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
43399 Author: Wolfgang Denk <wd@denx.de>
43400 Date: Wed Aug 29 14:05:30 2007 +0200
43402 Add mii_init() prototype
43404 to get rid of a *lot* of compiler warnings.
43406 Signed-off-by: Wolfgang Denk <wd@denx.de>
43408 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
43409 Author: Wolfgang Denk <wd@denx.de>
43410 Date: Wed Aug 29 13:35:03 2007 +0200
43412 Disable network support on cmi_mpc5xx board
43414 ..because it caused compiler errors and there seems to be no
43415 board maintainer to take care of this.
43417 Signed-off-by: Wolfgang Denk <wd@denx.de>
43419 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
43420 Author: Kumar Gala <galak@kernel.crashing.org>
43421 Date: Mon Aug 20 09:44:00 2007 -0500
43423 Fix MPC8544DS PCIe3 scsi.
43425 <ed.swarthout@freescale.com>
43427 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
43428 is allocating memory space it doesn't need.
43430 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
43431 Signed-off-by: Andy Fleming <afleming@freescale.com>
43433 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
43434 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
43435 Date: Tue Aug 21 09:38:59 2007 -0500
43439 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
43440 correct consoledev needed for linux boot.
43441 Standardize on fdt{file,addr} var to hold dtb file name.
43443 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
43445 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43447 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
43448 Author: Haiying Wang <Haiying.Wang@freescale.com>
43449 Date: Thu Aug 23 15:20:54 2007 -0400
43451 Enable L2 cache for MPC8568MDS board
43453 The L2 cache size is 512KB for 8568, print out the correct informaiton.
43455 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43457 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
43458 Author: Jason Jin <Jason.jin@freescale.com>
43459 Date: Wed Aug 22 17:54:49 2007 +0800
43461 Remove the bios emulator binary files from MAI board
43463 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
43465 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
43466 Author: Kim Phillips <kim.phillips@freescale.com>
43467 Date: Tue Aug 21 17:00:17 2007 -0500
43469 support board vendor-common makefiles
43471 if a board/$(VENDOR)/common/Makefile exists, build it.
43473 also add the first such case, board/freescale/common/Makefile, to
43474 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
43475 dictated by board configuration.
43477 thusly get rid of alternate build dir errors such as:
43479 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
43481 by putting the common/ mkdir command in its proper place (the common
43482 Makefile). Common bits from existing individual board Makefiles have
43485 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43487 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
43488 Author: stefano babic <sbabic@denx.de>
43489 Date: Tue Aug 21 15:52:33 2007 +0200
43491 Fix: TFTP is not working on little endian systems
43493 TFTP does not work anymore after multicast tftp
43494 patch was applied on little endian systems.
43497 Signed-off-by: Stefano Babic <sbabic@denx.de>
43499 commit 5f470948570526e9186f053a3003da7719604e90
43500 Author: stefano babic <sbabic@denx.de>
43501 Date: Tue Aug 21 15:50:33 2007 +0200
43503 Fix MAC address setting in DM9000 driver.
43505 The logic to check if there is a correct MAC address in the DM9000
43506 EEPROM, added in the last patch, is wrong. Now the MAC address is
43507 always taken from the environment, even if a suitable MAC is present
43510 Signed-off-by: Stefano Babic <sbabic@denx.de>
43512 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
43513 Author: Martin Krause <martin.krause@tqs.de>
43514 Date: Tue Aug 21 12:40:34 2007 +0200
43516 MPC5xxx: fix some compiler warnings in USB code
43518 Fix the following warnings:
43519 - usb.c:xx: warning: function declaration isn't a prototype
43520 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
43521 from pointer wihtout a cast
43523 Signed-off-by: Martin Krause <martin.krase@tqs.de>
43525 commit 16e23c3f5dab6937f5109365416808c7f15c122b
43526 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
43527 Date: Mon Aug 20 23:55:33 2007 -0500
43529 fsl_pci_init - Remove self PCSRBAR allocation
43531 CPU physical address space was being wasted by allocating a
43532 PCSRBAR PCI inbound region to it's memory space.
43534 As a rule, PCSRBAR should be left alone since it does not affect
43535 transactions from self and other masters may have changed it.
43537 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
43539 commit 0e700ce03a23bb1921149bc77008ace7103d5289
43540 Author: Martin Krause <martin.krause@tqs.de>
43541 Date: Mon Aug 20 13:56:47 2007 +0200
43543 Fix compiler warning in include/s3c2410.h
43545 This patch fixes the "type qualifiers ignored on fuction return tpye"
43546 warning for include/s3c2410.h
43548 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43550 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
43551 Author: Dirk Behme <dirk.behme@googlemail.com>
43552 Date: Mon Aug 20 07:09:05 2007 +0200
43554 Fix compilation error for omap2420h4_config.
43556 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
43557 and flash_probe() calls in env_flash.c.
43559 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
43561 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
43562 Author: Kim Phillips <kim.phillips@freescale.com>
43563 Date: Fri Aug 10 14:34:14 2007 -0500
43565 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
43567 and make some minor corrections to the FDT part of the README.
43569 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43571 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
43572 Author: Wolfgang Denk <wd@denx.de>
43573 Date: Wed Aug 29 01:32:05 2007 +0200
43575 Minor coding style cleanup.
43577 Signed-off-by: Wolfgang Denk <wd@denx.de>
43579 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
43580 Author: Heiko Schocher <hs@pollux.denx.de>
43581 Date: Tue Aug 28 17:40:33 2007 +0200
43583 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
43585 Signed-off-by: Heiko Schocher <hs@denx.de>
43587 commit f98984cb194bb34dbe1db9429d3b51133af30d07
43588 Author: Heiko Schocher <hs@pollux.denx.de>
43589 Date: Tue Aug 28 17:39:14 2007 +0200
43591 IDE: - make ide_inb () and ide_outb () "weak", so boards can
43592 define there own I/O functions.
43593 (Needed for the pcs440ep board).
43594 - The default I/O Functions are again 8 Bit accesses.
43595 - Added CONFIG_CMD_IDE for the pcs440ep Board.
43597 Signed-off-by: Heiko Schocher <hs@denx.de>
43599 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
43600 Author: Semih Hazar <semih.hazar@indefia.com>
43601 Date: Mon Aug 20 19:00:01 2007 +0300
43603 AVR32: Change prototype of memset
43605 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
43606 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43608 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
43609 Author: Yuri Tikhonov <yur@emcraft.com>
43610 Date: Sat Aug 25 05:07:16 2007 +0200
43612 POST: limit memory test area to not touch global data anymore
43614 As experienced on lwmon5, on some boards the POST memory test can
43615 corrupt the global data buffer (bd). This patch fixes this issue
43616 by checking and limiting this area.
43618 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
43619 Signed-off-by: Stefan Roese <sr@denx.de>
43621 commit 75e1a84d483e36be10e206e539b028c4889e1158
43622 Author: Stefan Roese <sr@denx.de>
43623 Date: Fri Aug 24 15:41:42 2007 +0200
43625 ppc4xx: Add RTC POST test to lwmon5 board configuration
43627 Since this RTC POST test is taking quite a while to complete
43628 it's only initiated upon special keypress same as the complete
43631 Signed-off-by: Stefan Roese <sr@denx.de>
43633 commit d7bfa620037a6d2210159387571bdf93aa32c162
43634 Author: Stefan Roese <sr@denx.de>
43635 Date: Fri Aug 24 15:19:10 2007 +0200
43637 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
43639 Signed-off-by: Stefan Roese <sr@denx.de>
43641 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
43642 Author: Stefan Roese <sr@denx.de>
43643 Date: Thu Aug 23 11:02:37 2007 +0200
43645 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
43647 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
43648 board. Now the "eeprom" command can be used to read/write from/to this
43649 device. Additionally a new command was added "eepromwp" to en-/disable
43650 the write-protect of this 2nd EEPROM.
43652 The 1st EEPROM is not affected by this write-protect command.
43654 Signed-off-by: Stefan Roese <sr@denx.de>
43656 commit c64fb30e4c5976007d56fc1789c7a0666082b536
43657 Author: Stefan Roese <sr@denx.de>
43658 Date: Wed Aug 22 08:56:09 2007 +0200
43660 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
43662 Signed-off-by: Stefan Roese <sr@denx.de>
43664 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
43665 Author: Stefan Roese <sr@denx.de>
43666 Date: Tue Aug 21 16:27:57 2007 +0200
43668 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
43670 This patch adds support for the matrix keyboard on the lwmon5 board.
43671 Since the implementation in the dsPCI is kind of compatible with the
43672 "old" lwmon board, most of the code is copied from the lwmon
43675 Signed-off-by: Stefan Roese <sr@denx.de>
43677 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
43678 Author: Wolfgang Denk <wd@denx.de>
43679 Date: Sun Aug 19 10:27:34 2007 +0200
43681 Fix some build errors.
43683 Signed-off-by: Wolfgang Denk <wd@denx.de>
43685 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
43686 Author: Wolfgang Denk <wd@denx.de>
43687 Date: Sat Aug 18 22:00:38 2007 +0200
43691 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
43692 Author: Kim Phillips <kim.phillips@freescale.com>
43693 Date: Thu Aug 16 22:52:39 2007 -0500
43695 lib_ppc: make board_add_ram_info weak
43697 platforms wishing to display RAM diagnostics in addition to size,
43698 can do so, on one line, in their own board_add_ram_info()
43701 this consequently eliminates CONFIG_ADD_RAM_INFO.
43703 Thanks to Stefan for the hint.
43705 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43707 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
43708 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43709 Date: Fri Aug 17 12:43:44 2007 +0900
43711 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
43713 This patch has been sent on:
43716 Many users of PCI config read routines tend to ignore the function
43717 ret value, and are only concerned about the contents of *val. Based
43718 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
43719 the *val on dword read error.
43721 Without this fix, for example, we'll go on scanning bus with vendor or
43722 header_type uninitialized. This brings many unnecessary config trials.
43724 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43726 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
43727 Author: Stefan Roese <sr@denx.de>
43728 Date: Sat Aug 18 14:37:52 2007 +0200
43730 ColdFire: Fix some remaining problems with CFG_CMD_
43732 Signed-off-by: Stefan Roese <sr@denx.de>
43734 commit 8280f6a1c43247616b68224675188e5ccd124650
43735 Author: Stefan Roese <sr@denx.de>
43736 Date: Sat Aug 18 14:33:02 2007 +0200
43738 Coding style cleanup
43740 Signed-off-by: Stefan Roese <sr@denx.de>
43742 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
43743 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43744 Date: Thu Aug 16 19:23:50 2007 -0500
43746 ColdFire: Add M5235EVB Platform for MCF523x
43748 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43750 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
43751 Author: Kim Phillips <kim.phillips@freescale.com>
43752 Date: Fri Aug 17 09:30:00 2007 -0500
43754 mpc83xx: fix typo in DDR2 programming
43756 introduced in the implement board_add_ram_info patch as I was cleaning out the
43757 magic numbers. sorry.
43759 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43761 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
43762 Author: Kim Phillips <kim.phillips@freescale.com>
43763 Date: Thu Aug 16 22:53:09 2007 -0500
43765 mpc83xx: move freescale boards to boards/freescale
43767 includes build fixes.
43769 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43771 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
43772 Author: Kim Phillips <kim.phillips@freescale.com>
43773 Date: Thu Aug 16 22:52:59 2007 -0500
43775 mpc83xx: suppress unused variable 'val8' warning
43777 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43779 commit bbea46f76f767b919070b4829bf34c86bd223248
43780 Author: Kim Phillips <kim.phillips@freescale.com>
43781 Date: Thu Aug 16 22:52:48 2007 -0500
43783 mpc83xx: implement board_add_ram_info
43785 add board_add_ram_info, to make memory diagnostic output more
43786 consistent. u-boot banner output now looks like:
43788 DRAM: 256 MB (DDR1, 64-bit, ECC on)
43790 and for boards with SDRAM on the local bus, a line such as this is
43793 SDRAM: 64 MB (local bus)
43795 also replaced some magic numbers with their equivalent define names.
43797 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43799 commit 14778585d1389d86d5846efec29e5fce892680ce
43800 Author: Tony Li <tony.li@freescale.com>
43801 Date: Fri Aug 17 10:35:59 2007 +0800
43803 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
43805 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
43806 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
43808 Signed-off-by Tony Li <tony.li@freescale.com>
43810 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
43811 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43812 Date: Thu Aug 16 15:05:11 2007 -0500
43814 ColdFire: Add M54455EVB for MCF5445x
43816 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43818 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
43819 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43820 Date: Thu Aug 16 13:20:50 2007 -0500
43822 ColdFire: Add M5253EVBE platform for MCF52x2
43824 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43826 commit a605aacd8324094199402816cc6d9124aba57b8d
43827 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43828 Date: Thu Aug 16 05:04:31 2007 -0500
43830 ColdFire: Add M5249EVB platform for MCF52x2
43832 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43834 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
43835 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43836 Date: Wed Aug 15 20:32:06 2007 -0500
43838 ColdFire: Update Freescale MCF52x2 platforms
43840 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43842 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
43843 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43844 Date: Wed Aug 15 19:55:10 2007 -0500
43846 ColdFire: Update EB+MCF-EV123 platform
43848 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43850 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
43851 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43852 Date: Wed Aug 15 19:46:38 2007 -0500
43854 ColdFire: update TASREG platform for MCF52x2
43856 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43858 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
43859 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43860 Date: Wed Aug 15 19:45:51 2007 -0500
43862 ColdFire: update r5200 platform for MCF52x2
43864 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43866 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
43867 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43868 Date: Wed Aug 15 19:43:20 2007 -0500
43870 ColdFire: idmr platform MCF52x2 update
43872 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43874 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
43875 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43876 Date: Wed Aug 15 19:41:06 2007 -0500
43878 ColdFire: cobra5272 platform for MCF52x2 update
43880 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43882 commit 56115665b4a64c10c01440c57749b265e0908fa4
43883 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43884 Date: Wed Aug 15 19:38:15 2007 -0500
43886 ColdFire: MCF52x2 Header files update
43888 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43890 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
43891 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43892 Date: Wed Aug 15 19:21:21 2007 -0500
43894 ColdFire: MCF52x2 update
43896 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43898 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
43899 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43900 Date: Wed Aug 15 18:46:11 2007 -0500
43902 ColdFire: MCF5329 update cache
43904 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43906 commit 7171977fb8fd77cfb6676953fa9a05789c450513
43907 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43908 Date: Wed Aug 15 15:40:20 2007 -0500
43910 ColdFire: MCF5329 header file clean up
43912 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43914 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
43915 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43916 Date: Wed Aug 15 15:39:17 2007 -0500
43918 ColdFire: MCF5329 Update and cleanup
43920 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
43922 commit 10327dc5541f947c0cf7e31fef86c4706169607a
43923 Author: Andy Fleming <afleming@freescale.com>
43924 Date: Thu Aug 16 16:35:02 2007 -0500
43926 Add CONFIG_HAS_ETH0 to all boards with TSEC
43928 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
43929 to update TSEC1's device-tree node, so we need to add it
43930 to all the boards with TSECs. Do this for 83xx and 86xx, too,
43931 since they will eventually do something similar.
43933 Signed-off-by: Andy Fleming <afleming@freescale.com>
43935 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
43936 Author: Kumar Gala <galak@kernel.crashing.org>
43937 Date: Thu Aug 16 15:05:04 2007 -0500
43939 Update MPC8544 DS PCI memory map
43941 The PCIe bus that the ULI M1575 is connected to has no possible way of
43942 needing more than the fixed amount of IO & Memory space needed by the ULI.
43944 So make it use far less IO & memory space and have it use the shared LAW. This
43945 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
43948 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43950 commit ea5877e31ed63ade948fd1293895ec23fe01472e
43951 Author: Kumar Gala <galak@kernel.crashing.org>
43952 Date: Thu Aug 16 11:01:21 2007 -0500
43954 Fix up some fdt issues on 8544DS
43956 It looks like we had a merge issue that duplicated a bit of code
43957 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
43958 the MAC address properly set in the device tree on boot for TSEC1
43960 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43962 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
43963 Author: Niklaus Giger <niklaus.giger@netstal.com>
43964 Date: Thu Aug 16 15:16:03 2007 +0200
43966 PPC4xx:HCU4/5 cleanup
43968 Minor cleanups to confirm to the u-boot coding style.
43969 Some german expressions -> english.
43970 HCU5 enforces a unique IP adress for a given slot in the rack.
43972 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
43974 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
43975 Author: Niklaus Giger <niklaus.giger@netstal.com>
43976 Date: Thu Aug 16 15:16:02 2007 +0200
43978 PPC4xx:HCU4/5 cleanup ecc/sdram init
43980 Make ecc initialisation robust, as DDR2-ECC errors may be generated
43981 while zeroing the RAM.
43983 Return 16 bytes (a cacheline) less than the available memory, as the
43984 board and/or PPC440EPx might have problems accessing the last bytes.
43986 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
43988 commit d35b508a55508535b6e8445b718585d27df733d3
43989 Author: Kim Phillips <kim.phillips@freescale.com>
43990 Date: Wed Aug 15 22:29:56 2007 -0500
43992 fdt: suppress unused variable 'bd' warning
43994 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43996 commit 82bd9ee77490588d4da785d75829ca63d0176baf
43997 Author: Andy Fleming <afleming@freescale.com>
43998 Date: Wed Aug 15 20:06:50 2007 -0500
44000 Fix warnings from of_data copy fix
44002 Forgot to cast of_flat_tree to ulong.
44004 Signed-off-by: Andy Fleming <afleming@freescale.com>
44006 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
44007 Author: Andy Fleming <afleming@freescale.com>
44008 Date: Wed Aug 15 20:03:44 2007 -0500
44010 Don't wait for disconnected TSECs
44012 The TSEC driver's PHY code waits a long time for autonegotiation to
44013 complete, even if the link is down. The PHY knows the link is
44014 down or up before autonegotiation completes, so we can short-circuit
44015 the process if the link is down.
44017 Signed-off-by: Andy Fleming <afleming@freescale.com>
44019 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
44020 Author: Andy Fleming <afleming@freescale.com>
44021 Date: Wed Aug 15 20:03:34 2007 -0500
44023 Fix numerous bugs in the 8568 UEC support
44025 Actually, fixed a large bug in the UEC for *all* platforms.
44026 How did this ever work?
44028 uec_init() did not follow the spec for eth_init(), and returned
44029 0 on success. Switch it to return the link like tsec_init()
44032 The immap for the 8568 was defined based on MPC8568, rather than
44037 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
44039 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
44042 Signed-off-by: Andy Fleming <afleming@freescale.com>
44044 commit 3a79013e2adda53332dfd0b511066a805e929a9d
44045 Author: Andy Fleming <afleming@freescale.com>
44046 Date: Wed Aug 15 20:03:25 2007 -0500
44048 Define tsec flag values in config files
44050 The tsec_info structure and array has a "flags" field for each
44051 ethernet controller. This field is the only reason there are
44052 settings. Switch to defining TSECn_FLAGS for each controller
44053 in the config header, and we can greatly simplify the array, and
44054 also simplify the addition of future boards.
44056 Signed-off-by: Andy Fleming <afleming@freescale.com>
44058 commit ec7238229507e7f47533a611ea8c53319d234cf3
44059 Author: Andy Fleming <afleming@freescale.com>
44060 Date: Wed Aug 15 20:03:13 2007 -0500
44062 Add support for building all boards with a TSEC
44064 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
44065 Now we can do a MAKEALL test on all of them!
44067 Signed-off-by: Andy Fleming <afleming@freescale.com>
44069 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
44070 Author: Andy Fleming <afleming@freescale.com>
44071 Date: Wed Aug 15 17:30:56 2007 -0500
44073 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
44075 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
44076 neglected to *also* put the code inside the similar #ifdef
44077 for CONFIG_OF_FLAT_TREE.
44079 Signed-off-by: Andy Fleming <afleming@freescale.com>
44081 commit 78f9fef7f406078c8bf7191e665a73f795157746
44082 Author: Scott Wood <scottwood@freescale.com>
44083 Date: Wed Aug 15 15:46:46 2007 -0500
44085 mpc885ads: Don't define CONFIG_BZIP2.
44087 bzip2 requires a significant chunk of malloc space, and there isn't
44088 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
44089 and a downloaded image at 0x400000.
44091 Signed-off-by: Scott Wood <scottwood@freescale.com>
44093 commit 002275a3ed8b114885f6702d6d544d0780dfe689
44094 Author: Michal Simek <Monstr@seznam.cz>
44095 Date: Thu Aug 16 08:54:10 2007 +0200
44097 Bios emulator - fix microblaze toolchain problem
44099 microblaze CPU have problem with bios_emulator code.
44100 Microblaze toolchain doesn't support PRAGMA PACK.
44102 Signed-off-by: Michal Simek <monstr@monstr.eu>
44104 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
44105 Author: Wolfgang Denk <wd@denx.de>
44106 Date: Thu Aug 16 11:51:04 2007 +0200
44108 Minor Coding Style fix; Update CHANGELOG file.
44110 Signed-off-by: Wolfgang Denk <wd@denx.de>
44112 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
44113 Author: Stefan Roese <sr@denx.de>
44114 Date: Thu Aug 16 11:21:49 2007 +0200
44116 ppc4xx: Remove #warning in esd auto_update.c
44118 Signed-off-by: Stefan Roese <sr@denx.de>
44120 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
44121 Author: Stefan Roese <sr@denx.de>
44122 Date: Fri Jun 22 17:32:28 2007 +0200
44124 ppc7xx: Update CPCI750 board
44126 This small CPCI750 update extends the board specific command
44127 "show_config" to display the Marvell strapping registers and
44128 extends the PCI IDE controller.
44130 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
44131 Signed-off-by: Stefan Roese <sr@denx.de>
44133 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
44134 Author: Michal Simek <monstr@monstr.eu>
44135 Date: Thu Aug 16 10:46:28 2007 +0200
44137 [FIX] Changes for bios_emulator code for others architecture
44139 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
44140 Author: Michal Simek <monstr@monstr.eu>
44141 Date: Thu Aug 16 10:45:09 2007 +0200
44143 [FIX] Remove unused include file
44145 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
44146 Author: Stefan Roese <sr@denx.de>
44147 Date: Thu Aug 16 10:18:33 2007 +0200
44149 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
44151 Signed-off-by: Stefan Roese <sr@denx.de>
44153 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
44154 Author: Stefan Roese <sr@denx.de>
44155 Date: Thu Aug 16 09:54:51 2007 +0200
44157 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
44159 Signed-off-by: Stefan Roese <sr@denx.de>
44161 commit 02ba7022f62bb75908296c58c63866e1d294b69a
44162 Author: Stefan Roese <sr@denx.de>
44163 Date: Thu Aug 16 09:52:29 2007 +0200
44165 ppc4xx: Update Sequoia/Rainier bootstrap command
44167 As suggested by David Mitchell, here an update for the Sequoia/Rainier
44170 Signed-off-by: Stefan Roese <sr@denx.de>
44172 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
44173 Author: Kim Phillips <kim.phillips@freescale.com>
44174 Date: Wed Aug 15 22:30:39 2007 -0500
44176 mpc83xx: enable libfdt by default on freescale boards
44178 this enables libfdt code by default for the
44179 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
44180 mpc8349itx and gp boards.
44182 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44184 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
44185 Author: Kim Phillips <kim.phillips@freescale.com>
44186 Date: Wed Aug 15 22:30:33 2007 -0500
44188 mpc83xx: migrate remaining freescale boards to libfdt
44190 this adds libfdt support code for the freescale
44191 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
44194 Boards remain compatible with OF_FLAT_TREE.
44196 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44198 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
44199 Author: Kim Phillips <kim.phillips@freescale.com>
44200 Date: Wed Aug 15 22:30:26 2007 -0500
44202 mpc83xx: move common /memory node update mechanism to cpu.c
44204 also adds common prototypes to include/common.h.
44206 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44208 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
44209 Author: Kim Phillips <kim.phillips@freescale.com>
44210 Date: Wed Aug 15 22:30:19 2007 -0500
44212 mpc83xx: remaining 8360 libfdt fixes
44214 PCI clocks and QE frequencies weren't being updated, and the core clock
44215 was being updated incorrectly. This patch also adds a /memory node if
44216 it doesn't already exist prior to update.
44218 plus some cosmetic trimming to single line comments.
44220 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44222 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
44223 Author: Kim Phillips <kim.phillips@freescale.com>
44224 Date: Wed Aug 15 22:30:12 2007 -0500
44226 mpc83xx: fix UEC2->1 typo in libfdt setup code
44228 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44230 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
44231 Author: Kim Phillips <kim.phillips@freescale.com>
44232 Date: Wed Aug 15 22:30:05 2007 -0500
44234 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
44236 and reorder the existing 83xx maintainers alpha.
44238 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44240 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
44241 Author: Michal Simek <monstr@monstr.eu>
44242 Date: Wed Aug 15 21:15:05 2007 +0200
44244 [FIX] Resolve problem with warnings
44245 microblaze toolchain don't support PRAGMA PACK.
44247 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
44248 Author: Michal Simek <monstr@monstr.eu>
44249 Date: Wed Aug 15 21:05:07 2007 +0200
44251 [FIX] Correction command setting for Microblaze boards
44253 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
44254 Author: Michal Simek <monstr@monstr.eu>
44255 Date: Wed Aug 15 21:03:41 2007 +0200
44257 [FIX] Correction command definition
44259 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
44260 Author: Jon Loeliger <jdl@freescale.com>
44261 Date: Wed Aug 15 11:55:35 2007 -0500
44263 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
44265 Remove a leftover in net/tftp.c while we're at it.
44267 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44269 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
44270 Author: Jon Loeliger <jdl@freescale.com>
44271 Date: Wed Aug 15 12:20:40 2007 -0500
44273 Move the MPC8641HPCN board under board/freescale.
44275 Minor path corrections needed to ensure buildability.
44277 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44279 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
44280 Author: Jon Loeliger <jdl@freescale.com>
44281 Date: Wed Aug 15 11:46:22 2007 -0500
44283 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
44285 Remove a leftover in net/tftp.c while we're at it.
44287 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44289 commit 210f463c71917b7a4495c2103c228b9c179ae64d
44290 Author: Jerry Van Baren <gvb.uboot@gmail.com>
44291 Date: Wed Aug 15 11:13:15 2007 -0400
44293 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
44295 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
44296 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
44297 when it should have gone inside of the conditional. As a result, it
44298 broke non-LIBFDT board builds.
44300 Also added a missing "not." to the comment.
44302 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44304 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
44305 Author: Niklaus Giger <niklaus.giger@netstal.com>
44306 Date: Wed Aug 15 12:14:23 2007 +0200
44308 PPC4xx:HCU4/5-Board fix compile warning
44310 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
44312 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
44313 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44314 Date: Tue Aug 14 14:06:45 2007 -0500
44316 Fix malloc size error in ahci_init_one.
44318 Typically this causes scsi init to corrupt the
44319 devlist and break the coninfo command.
44320 Fix a compiler size warning.
44322 Signed-off-by: Jason Jin <jason.jin@freescale.com>
44323 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44324 Acked-by: Andy Fleming <afleming@freescale.com>
44326 commit b361acd64fd2525c081b9b288b0804efe209c0e9
44327 Author: ksi@koi8.net <ksi@koi8.net>
44328 Date: Tue Aug 14 10:02:16 2007 -0700
44330 TI DaVinci - fix unsupported %hhx format
44332 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
44334 commit f01dbb5424a81453c81190dd30e945891466f621
44335 Author: Wolfgang Denk <wd@denx.de>
44336 Date: Tue Aug 14 18:42:36 2007 +0200
44338 Coding style cleanup. Update CHANGELOG.
44340 Signed-off-by: Wolfgang Denk <wd@denx.de>
44342 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
44343 Author: Andy Fleming <afleming@freescale.com>
44344 Date: Tue Aug 14 10:32:59 2007 -0500
44346 Fix initrd/dtb interaction
44348 The original code would wrongly relocate the blob to be right before
44349 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
44350 if it is defined. So we make two changes:
44352 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
44354 2) If the blob is being relocated, relocate it before kbd, not initrd
44356 Signed-off-by: Andy Fleming <afleming@freescale.com>
44358 commit e54b970173769307a116bd34028b6d0c2eea2a4e
44359 Author: Peter Pearse <peter.pearse@arm.com>
44360 Date: Tue Aug 14 15:40:00 2007 +0100
44362 Supply spi interface in at45.c
44364 commit 4ce846ec59f36b85d6644a769690ad3feb667575
44365 Author: Stefan Roese <sr@denx.de>
44366 Date: Tue Aug 14 15:12:01 2007 +0200
44368 POST: Fix merge problem
44370 Signed-off-by: Stefan Roese <sr@denx.de>
44372 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
44373 Author: Stefan Roese <sr@denx.de>
44374 Date: Tue Aug 14 15:03:17 2007 +0200
44376 Coding style cleanup
44378 Signed-off-by: Stefan Roese <sr@denx.de>
44380 commit 779e975117a75e91fcebe226a63104dbfb924ab1
44381 Author: Stefan Roese <sr@denx.de>
44382 Date: Tue Aug 14 14:44:41 2007 +0200
44384 ppc4xx: Add initial Zeus (PPC405EP) board support
44386 Signed-off-by: Stefan Roese <sr@denx.de>
44388 commit c5a172a5fd636c12467429e3f7910e53773979c6
44389 Author: Stefan Roese <sr@denx.de>
44390 Date: Tue Aug 14 14:41:55 2007 +0200
44392 POST: Add option for external ethernet loopback test
44394 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
44395 is not done using an internal loopback connection, but by assuming
44396 that an external loopback connector is plugged into the board.
44398 Signed-off-by: Stefan Roese <sr@denx.de>
44400 commit eb2b4010ae426245172988804ee8d9193fb41038
44401 Author: Stefan Roese <sr@denx.de>
44402 Date: Tue Aug 14 14:39:44 2007 +0200
44404 POST: Add ppc405 support to cache and UART POST
44406 Signed-off-by: Stefan Roese <sr@denx.de>
44408 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
44409 Author: Peter Pearse <peter.pearse@arm.com>
44410 Date: Tue Aug 14 10:46:32 2007 +0100
44412 Replace lost end of at45.c.
44414 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
44415 Author: Peter Pearse <peter.pearse@arm.com>
44416 Date: Tue Aug 14 10:30:06 2007 +0100
44418 Update Makefiles for merged and split at45.c.
44420 commit 3454cece2db57cb9eb7087995f7e73066a163f71
44421 Author: Peter Pearse <peter.pearse@arm.com>
44422 Date: Tue Aug 14 10:21:06 2007 +0100
44424 Delete the merged files.
44426 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
44427 Author: Peter Pearse <peter.pearse@arm.com>
44428 Date: Tue Aug 14 10:14:05 2007 +0100
44432 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
44433 Author: Peter Pearse <peter.pearse@arm.com>
44434 Date: Tue Aug 14 10:10:52 2007 +0100
44436 Add MACH_TYPE records for several AT91 boards.
44437 Merge to two at45.c files into a common file, split to at45.c and spi.c
44438 Fix spelling error in DM9161 PHY Support.
44439 Initialize at91rm9200 board (and set LED).
44440 Add PIO control for at91rm9200dk LEDs and Mux.
44441 Change dataflash partition boundaries to be compatible with Linux 2.6.
44443 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
44444 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
44446 commit 4ef35e53c693556c54b0c22d6f873de87bade253
44447 Author: Wolfgang Denk <wd@denx.de>
44448 Date: Tue Aug 14 09:54:46 2007 +0200
44450 Coding style cleanup, update CHANGELOG
44452 Signed-off-by: Wolfgang Denk <wd@denx.de>
44454 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
44455 Author: Wolfgang Denk <wd@denx.de>
44456 Date: Tue Aug 14 09:47:27 2007 +0200
44458 Coding style cleanup; rebuild CHANGELOG
44460 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
44461 Author: Randy Vinson <rvinson@linuxbox.(none)>
44462 Date: Tue Feb 27 19:42:22 2007 -0700
44464 85xxCDS: Add make targets for legacy systems.
44466 The PCI ID select values on the Arcadia main board differ depending
44467 on the version of the hardware. The standard configuration supports
44468 Rev 3.1. The legacy target supports Rev 2.x.
44470 Signed-off-by Randy Vinson <rvinson@mvista.com>
44472 commit e41094c7e38177c755fbd9b182018069614f080d
44473 Author: Andy Fleming <afleming@freescale.com>
44474 Date: Tue Aug 14 01:50:09 2007 -0500
44476 85xxCDS: Enable the VIA PCI-to-ISA bridge.
44478 Author: Randy Vinson <rvinson@linuxbox.(none)>
44480 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
44481 Arcadia main board.
44483 Signed-off-by: Randy Vinson <rvinson@mvista.com>
44484 Signed-off-by: York Sun <yorksun@freescale.com>
44486 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
44487 Author: Andy Fleming <afleming@freescale.com>
44488 Date: Tue Aug 14 00:14:25 2007 -0500
44490 Add support for UEC to 8568
44492 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
44493 Signed-off-by: Andy Fleming <afleming@freescale.com>
44495 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
44496 Author: Haiying Wang <Haiying.Wang@freescale.com>
44497 Date: Tue Jun 19 14:18:34 2007 -0400
44499 Add PCI support for MPC8568MDS board
44501 This patch is against u-boot-mpc85xx.git of www.denx.com
44503 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
44504 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
44506 commit d111d6382c99fdea08c2312eeeae8786945e189a
44507 Author: Haiying Wang <Haiying.Wang@freescale.com>
44508 Date: Tue Jun 19 14:18:32 2007 -0400
44510 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
44512 This patch is against u-boot-mpc85xx.git of www.denx.com
44514 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
44515 both MPC8548CDS board and MPC8568MDS board, especially for supporting
44518 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
44519 DDR2 on all current board versions especially ver 1.92 or later to bring
44522 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
44524 commit 3db0bef59eab1155801618cef5c481e97553b597
44525 Author: Kumar Gala <galak@kernel.crashing.org>
44526 Date: Tue Aug 7 18:07:27 2007 -0500
44528 Use an absolute address when jumping out of 4k boot page
44530 On e500 when we leave the 4k boot page we should use an absolute address since
44531 we don't know where the board code may want us to be really running at.
44533 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44535 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
44536 Author: Andy Fleming <afleming@freescale.com>
44537 Date: Mon Aug 13 14:49:59 2007 -0500
44539 MPC85xx BA bits not set for 3-bit bank address DIMM
44541 The current implementation does not set the number of bank address bits
44542 (BA) in the processor. The default assumes 2 logical bank bits. This
44543 works fine for a DIMM that uses devices with 4 internal banks (SPD
44544 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
44545 devices with 8 internal banks (SPD byte17 = 0x8).
44547 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
44549 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
44550 Author: Andy Fleming <afleming@freescale.com>
44551 Date: Mon Aug 13 14:38:06 2007 -0500
44553 Fix minor 85xx warnings
44555 Some patches had inserted warnings into the build:
44556 * mpc8560ads declared data without using it
44557 * cpu_init declared ecm and immap without using it in all CONFIGs
44558 * MPC8548CDS.h had its default filenames changed so that they contained
44559 "\m" in the paths. Made the defaults not Windows-specific (or
44562 Signed-off-by: Andy Fleming <afleming@freescale.com>
44564 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
44565 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44566 Date: Fri Jul 27 01:50:52 2007 -0500
44568 8548cds PCIE support.
44570 Make the early L1 cache stack region guarded to prevent speculative
44571 fetches outside the locked range.
44573 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
44574 init.S whitespace cleanup.
44576 Allow TEXT_BASE value to be specified on command line. This allows it
44577 to be set to 0xfffc0000 which cuts the uboot binary in half.
44579 Clear and enable lbc and ecm errors.
44581 Update last_busno in device-tree for pci and pcie.
44583 Remove load of obsolete cpu/mpc85xx/pci.0
44585 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44586 Acked-by: Andy Fleming <afleming@freescale.com>
44588 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
44589 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44590 Date: Fri Jul 27 01:50:51 2007 -0500
44592 8544ds PCIE support
44594 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
44596 Enable LBC and ECM errors and clear error registers.
44598 Add tftpflash env var to get uboot from tftp server and flash it.
44600 Add pci/pcie convenience env vars to display register space:
44601 "run pcie3regs" to see all pcie3 ccsr registers
44602 "run pcie3cfg" to see all cfg registers
44603 Whitespace cleanup and MPC8544DS.h
44605 Enable CONFIG_INTERRUPTS.
44607 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44608 Acked-by: Andy Fleming <afleming@freescale.com>
44610 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
44611 Author: Andy Fleming <afleming@freescale.com>
44612 Date: Tue Aug 14 01:34:21 2007 -0500
44614 85xx start.S cleanup and exception support
44616 From: Ed Swarthout <Ed.Swarthout@freescale.com>
44618 Support external interrupts from platform to eliminate system hangs.
44619 Define CONFIG_INTERRUPTS board configure option to enable.
44620 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
44622 Remove extra cpu initialization redundant with hardware initialization.
44623 Whitespace cleanup.
44625 Define and use _START_OFFSET consistent with other processors using
44628 Move additional code from .text to boot page to make room for
44629 exception vectors at start of image.
44631 Handle Machine Check, External and Critical exceptions.
44633 Fix e500 machine check error determination in traps.c
44635 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
44637 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44638 Acked-by: Andy Fleming <afleming@freescale.com>
44640 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
44641 Author: Andy Fleming <afleming@freescale.com>
44642 Date: Tue Aug 14 01:33:18 2007 -0500
44644 Add MPC8544DS README
44646 Signed-off-by: Andy Fleming <afleming@freescale.com>
44648 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
44649 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44650 Date: Fri Jul 27 01:50:48 2007 -0500
44652 85xx allow debugger to configure ddr.
44654 Only check for mpc8548 rev 1 when compiled for 8548.
44656 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44657 Acked-by: Andy Fleming <afleming@freescale.com>
44659 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
44660 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44661 Date: Fri Jul 27 01:50:47 2007 -0500
44663 mpc85xx L2 cache reporting and SRAM relocation option.
44665 Allow debugger to override flash cs0/cs1 settings to enable alternate
44668 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44669 Acked-by: Andy Fleming <afleming@freescale.com>
44671 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
44672 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44673 Date: Fri Jul 27 01:50:46 2007 -0500
44675 e500 needs ppc_asm.tmp MCK_EXCEPTION
44677 Always define MCK_EXCEPTION macro - so e500 can use it too.
44679 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44680 Acked-by: Andy Fleming <afleming@freescale.com>
44682 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
44683 Author: David Updegraff <dave@cray.com>
44684 Date: Mon Jun 11 10:41:07 2007 -0500
44686 multicast tftp: RFC2090
44688 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
44689 on Realtek RTL8139 and Freescale TSEC.
44691 Signed-off-by: David Updegraff <dave@cray.com>
44692 Signed-off-by: Ben Warren <bwarren@qstreams.com>
44694 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
44695 Author: Wilson Callan <wcallan@savantav.com>
44696 Date: Sat Jul 28 10:56:13 2007 -0400
44698 New CONFIG_BOOTP_SERVERIP option
44700 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
44701 from the bootp server
44703 Signed-off-by: Wilson Callan <wcallan@savantav.com>
44704 Signed-off-by: Ben Warren <bwarren@qstreams.com>
44706 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
44707 Author: Mike Rapoport <mike@compulab.co.il>
44708 Date: Sun Aug 12 08:48:27 2007 +0300
44710 Add ability to take MAC address from the environment to DM9000 driver
44712 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
44713 Signed-off-by: Ben Warren <bwarren@qstreams.com>
44715 commit be5d72d10d47609326226225181e301fb9a33b58
44716 Author: Wolfgang Denk <wd@denx.de>
44717 Date: Mon Aug 13 21:57:53 2007 +0200
44719 Minor coding style cleanup. Update CHANGELOG.
44721 Signed-off-by: Wolfgang Denk <wd@denx.de>
44723 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
44724 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
44725 Date: Sat Aug 11 06:54:58 2007 -0500
44727 Modify SBC8641D to use new Freescale PCI routines
44729 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
44732 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
44733 Signde-off-by: Jon Loeliger <jdl@freescale.com>
44735 commit a08458303e7f9db67f296980036d3292c35cb45c
44736 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44737 Date: Fri Jun 29 18:38:51 2007 +0200
44739 atmel_mci: Fix data timeout value
44741 Calculate the data timeout based on values from the CSD instead of
44742 just using a hardcoded DTOR value. This is a backport of a similar fix
44743 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
44746 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44748 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
44749 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44750 Date: Mon Aug 13 17:22:31 2007 +0200
44752 AVR32: Include <div64.h> instead of <asm/div64.h>
44754 include/asm-avr32/div64.h was recently moved to include/div64.h, but
44755 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
44756 the patch was merged perhaps?)
44758 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
44761 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44763 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
44764 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44765 Date: Wed Jun 27 13:34:26 2007 +0200
44767 atmel_mci: Use 512 byte blocksize if possible
44769 Instead of always using the largest blocksize the card supports, check
44770 if it can support smaller block sizes and use 512 bytes if possible.
44771 Most cards do support this, and other parts of u-boot seem to have
44772 trouble with block sizes different from 512 bytes.
44774 Also enable underrun/overrun protection.
44776 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44777 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
44779 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
44780 Author: Stefan Roese <sr@denx.de>
44781 Date: Mon Aug 13 09:05:33 2007 +0200
44783 ppc4xx: Fix problem in PLL clock calculation
44785 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
44786 and fixes a bug in the PLL clock calculation.
44788 Signed-off-by: Stefan Roese <sr@denx.de>
44790 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
44791 Author: Wolfgang Denk <wd@denx.de>
44792 Date: Sun Aug 12 21:34:50 2007 +0200
44796 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
44797 Author: Wolfgang Denk <wd@denx.de>
44798 Date: Sun Aug 12 21:34:34 2007 +0200
44800 Minor alignment of output, 2nd try.
44801 Also update CHANGELOG
44803 Signed-off-by: Wolfgang Denk <wd@denx.de>
44805 commit 6b309f22a724fad8418e811751a0741b893419cf
44806 Author: Wolfgang Denk <wd@denx.de>
44807 Date: Sun Aug 12 20:35:49 2007 +0200
44809 Minor alignment of output
44811 Signed-off-by: Wolfgang Denk <wd@denx.de>
44813 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
44814 Author: Wolfgang Denk <wd@denx.de>
44815 Date: Sun Aug 12 18:28:18 2007 +0200
44817 Cleanup output on ADS5121 board
44819 Signed-off-by: Wolfgang Denk
44821 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
44822 Author: Wolfgang Denk <wd@denx.de>
44823 Date: Sun Aug 12 15:11:38 2007 +0200
44825 Adapt board configuration and fix kernel crash on MCC200 board.
44827 The update procedure was modified to turn off the USB subsystem
44828 before exit for MCC200 and TRAB. This is necessary as otherwise the
44829 USB controller continues to write periodically to system memory!
44831 MCC200-specific notes:
44832 - the patch disables the magic key check for MCC200
44833 - the patch contains the configuration changes made
44834 for the new revision of the board.
44836 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
44837 Signed-off-by: Wolfgang Denk <wd@denx.de>
44839 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
44840 Author: Wolfgang Denk <wd@denx.de>
44841 Date: Sun Aug 12 14:47:54 2007 +0200
44843 Adjust default configuration of ADS5121 board.
44845 Signed-off-by: Wolfgang Denk <wd@denx.de>
44847 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
44848 Author: Wolfgang Denk <wd@denx.de>
44849 Date: Sun Aug 12 14:27:39 2007 +0200
44851 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
44853 Signed-off-by: Wolfgang Denk <wd@denx.de>
44855 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
44856 Author: Gerald Van Baren <vanbaren@cideas.com>
44857 Date: Tue Aug 7 21:14:22 2007 -0400
44859 Improve error print messages.
44861 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44863 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
44864 Author: Kim Phillips <kim.phillips@freescale.com>
44865 Date: Tue Jul 17 13:57:04 2007 -0500
44867 fdt: allow for builds that don't want env and bd_t nodes
44869 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
44872 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44874 commit 91148bf7aeba142d6f348805db7625db7da64d6f
44875 Author: Kim Phillips <kim.phillips@freescale.com>
44876 Date: Tue Jul 17 13:56:53 2007 -0500
44878 fdt: do board setup based on fdt address specified on bootm line
44880 The last fdt patch to bootm did board setup based on the address
44881 specified by a prior fdt address command invocation. The bootm
44882 code, as its call to fdt_chosen does, should use the fdt specified
44883 by the user on the bootm command. Note this restores full
44884 functionality for the 8360's existing default boot environment
44885 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
44886 before booting a kernel).
44888 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44890 commit e125a2ffc209dd34794e326c7175658253beadf3
44891 Author: Gerald Van Baren <vanbaren@cideas.com>
44892 Date: Tue Jul 10 20:40:39 2007 -0400
44894 Call ft_board_setup() from the bootm command.
44896 In the patch titled "Create new fdt boardsetup command..." I removed the
44897 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
44898 to add a direct call back into cmd_bootm.c
44900 This fixes the oversight by adding the direct call to the bootm command.
44902 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44904 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
44905 Author: Gerald Van Baren <vanbaren@cideas.com>
44906 Date: Mon Jun 25 23:25:28 2007 -0400
44908 Create new fdt boardsetup command, fix bug parsing [] form of set values.
44910 Previously ft_board_setup() was called by fdt_chosen() which was not
44911 really correctly structured. This splits ft_board_setup() out by creating
44912 a new fdt boardsetup command.
44914 Fix a bug when parsing fdt set command values which have the square
44915 bracket form [00 11 22 33] - the length was updated incorrectly in when
44918 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44920 commit 6f35ded9e85493595e0eb66a82b502a95326d049
44921 Author: Gerald Van Baren <vanbaren@cideas.com>
44922 Date: Mon Jun 25 20:55:58 2007 -0400
44924 Tighten up the error messages.
44926 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44928 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
44929 Author: Gerald Van Baren <vanbaren@cideas.com>
44930 Date: Mon Jun 25 19:52:23 2007 -0400
44932 Asthetic improvements: error messages and line lengths.
44934 Tighten up the error messages, split overlength lines.
44936 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44938 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
44939 Author: Gerald Van Baren <vanbaren@cideas.com>
44940 Date: Fri May 25 22:08:57 2007 -0400
44942 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
44944 The fdt_chosen() function was adding/seting some properties ad-hoc
44945 improperly and duplicated (poorly) what was done in ft_board_setup()
44947 Clean up long lines (setting properties, printing errors).
44949 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44951 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
44952 Author: Gerald Van Baren <vanbaren@cideas.com>
44953 Date: Mon May 21 23:27:16 2007 -0400
44955 For fdt_find_node_by_path(), handle the root path properly.
44957 Also removes the special case root path detection in cmd_fdt.c since it
44958 is no longer necessary.
44960 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44962 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
44963 Author: Gerald Van Baren <vanbaren@cideas.com>
44964 Date: Thu May 17 23:54:36 2007 -0400
44966 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
44968 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
44969 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
44971 commit 1a861169bc3758f9de3aead62b058736c6891246
44972 Author: Gerald Van Baren <vanbaren@cideas.com>
44973 Date: Wed Jun 6 22:47:58 2007 -0400
44975 Replace fdt_node_offset() with fdt_find_node_by_path().
44977 The new name matches more closely the kernel's name, which is also
44978 a much better description.
44980 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
44981 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
44983 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
44984 Author: Gerald Van Baren <vanbaren@cideas.com>
44985 Date: Wed May 16 22:39:59 2007 -0400
44987 Fix cmd_fdt line lengths, refactor code.
44989 Break lines that were greater than 80 characters in length.
44990 Move the fdt print and property parsing code to separate static functions
44991 to reduce coding clutter in the fdt_cmd handling body.
44993 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44995 commit 25114033ab21788810c48ba4df103b649da1223b
44996 Author: Gerald Van Baren <vanbaren@cideas.com>
44997 Date: Sat May 12 09:47:25 2007 -0400
44999 FDT command improvements.
45001 Fix "fdt set" so that it will create a non-existing property.
45002 Add "fdt mknode" to create nodes.
45004 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45006 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
45007 Author: Gerald Van Baren <vanbaren@cideas.com>
45008 Date: Sat May 12 09:45:46 2007 -0400
45010 Reorganize and fix problems (returns) in the bootm command.
45012 Do *NOT* return after the "point of no return" has been passed.
45013 If something goes wrong, the board must be reset after that point.
45014 Move the "Transferring control to Linux" debug message back to where it
45015 belongs: just before transferring control to linux.
45017 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45019 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
45020 Author: Gerald Van Baren <vanbaren@cideas.com>
45021 Date: Tue May 8 21:27:35 2007 -0400
45023 Fix bugs in the CONFIG_OF_LIBFDT
45025 Stupid coding mistakes (identified by Timur Tabi, thanks).
45027 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45029 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
45030 Author: Gerald Van Baren <vanbaren@cideas.com>
45031 Date: Wed Apr 25 22:47:15 2007 -0400
45033 Improve fdt move length handling.
45035 Make the length parameter optional: if not specified, do the move using
45036 the current size unchanged.
45038 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45040 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
45041 Author: Gerald Van Baren <vanbaren@cideas.com>
45042 Date: Wed Apr 25 22:23:36 2007 -0400
45044 Minor code clean up.
45046 Declare the variable fdt properly as extern.
45047 Call the "set_fn" function pointer the "short way" without the full
45048 dereferencing syntax.
45050 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45052 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
45053 Author: Gerald Van Baren <vanbaren@cideas.com>
45054 Date: Wed Apr 25 21:24:27 2007 -0400
45056 Improve error messages, more informative.
45058 Print more than the raw libfdt error message strings. This is especially
45059 useful for cluing in the user when the bootm command aborts due to
45062 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45064 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
45065 Author: Gerald Van Baren <vanbaren@cideas.com>
45066 Date: Fri Apr 20 22:46:53 2007 -0400
45068 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
45070 This is the way u-boot reduces configured-out code. At Wolfgang
45071 Grandegger and Wolfgang Denk's request, make libfdt conform.
45073 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45075 commit 923efd286411ed052d9e074f59f8986d6081061c
45076 Author: Bruce Adler <bruce.adler@ccpu.com>
45077 Date: Fri Aug 10 14:54:47 2007 -0700
45079 add image size and descriptors for Spartan 3E FPGA chips
45081 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
45083 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
45085 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
45086 Author: Kim Phillips <kim.phillips@freescale.com>
45087 Date: Fri Aug 10 15:34:48 2007 -0500
45089 make MAKEALL more immune to merge conflicts
45091 ..by placing board entries one per line, as suggested by jdl.
45093 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45095 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
45096 Author: Kim Phillips <kim.phillips@freescale.com>
45097 Date: Fri Aug 10 13:28:25 2007 -0500
45099 README: Remove outdated cpu type, board type, and NAME_config lists
45101 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45103 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
45104 Author: Dave Liu <r63238@freescale.com>
45105 Date: Fri Aug 10 15:48:59 2007 +0800
45107 mpc83xx: Suppress the warning 'burstlen'
45109 suppress the warning 'burstlen' of spd_sdram.
45111 Signed-off-by: Dave Liu <daveliu@freescale.com>
45113 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
45114 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
45115 Date: Thu Aug 9 15:11:03 2007 -0500
45117 Add support for SBC8641D. Config files.
45119 Add support for Wind River's SBC8641D reference board.
45121 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
45122 Acked-by: Wolfgang Denk <wd@denx.de>
45123 Acked-by: Jon Loeliger <jdl@freescale.com>
45125 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
45126 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
45127 Date: Thu Aug 9 15:10:53 2007 -0500
45129 Add support for SBC8641D. Board files.
45131 Add support for Wind River's SBC8641D reference board.
45133 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
45134 Acked-by: Wolfgang Denk <wd@denx.de>
45135 Acked-by: Jon Loeliger <jdl@freescale.com>
45137 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
45138 Author: Stefan Roese <sr@denx.de>
45139 Date: Fri Aug 10 20:34:58 2007 +0200
45141 Conding style cleanup
45143 Signed-off-by: Stefan Roese <sr@denx.de>
45145 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
45146 Author: Sergey Kubushyn <ksi@koi8.net>
45147 Date: Fri Aug 10 20:26:18 2007 +0200
45149 [ARM] TI DaVinci support, hopefully final
45151 Add support for the following DaVinci boards:
45158 - Split into separate board directories
45159 - Removed changes to MTD_DEBUG (or whatever it's called)
45160 - New CONFIG_CMD party line followed
45161 - Some cosmetic fixes, cleanup etc.
45162 - Patches against the latest U-Boot tree as of now.
45163 - Fixed CONFIG_CMD_NET in net files.
45164 - Fixed CONFIG_CMD_EEPROM for schmoogie.
45165 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
45166 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
45167 but it at least compiles.
45169 Here is an excerpt from session log on SCHMOOGIE...
45171 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
45180 ETH PHY : DP83848 @ 0x01
45182 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
45183 U-Boot > ping 192.168.253.10
45184 host 192.168.253.10 is alive
45187 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
45188 Acked-by: Dirk Behme <dirk.behme@gmail.com>
45189 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
45190 Acked-by: Stefan Roese <sr@denx.de>
45192 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
45193 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
45194 Date: Fri Jul 27 01:50:45 2007 -0500
45196 fsl_pci_init cleanup.
45198 Do not enable normal errors created during probe (master abort, perr,
45199 and pcie Invalid Configuration access).
45201 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
45203 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
45204 Acked-by: Andy Fleming <afleming@freescale.com>
45206 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
45207 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
45208 Date: Fri Jul 27 01:50:44 2007 -0500
45210 pciauto_setup_device bars_num fix
45212 Passing bars_num=0 to pciauto_setup_device should assign no bars.
45214 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
45215 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
45216 Acked-by: Andy Fleming <afleming@freescale.com>
45218 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
45219 Author: Jon Loeliger <jdl@freescale.com>
45220 Date: Mon Aug 6 17:39:44 2007 -0500
45222 8641hpcn: Do correct sized pointer math.
45224 When I rebased Ed's patch and cleaned up a few compilation
45225 problems, I apparently rebased my brain on crack first.
45226 Fix that by doing (char *) sized pointer math as needed.
45228 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45230 commit cfc7a7f5bb3273c9951173c788001d45118f141f
45231 Author: Jon Loeliger <jdl@freescale.com>
45232 Date: Thu Aug 2 14:42:20 2007 -0500
45236 Remove rev 1 fixes.
45237 Always set PICGCR_MODE.
45238 Enable machine check and provide board config option
45239 to set and handle SoC error interrupts.
45241 Include MSSSR0 in error message.
45243 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
45245 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
45246 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45248 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
45249 Author: Stefan Roese <sr@denx.de>
45250 Date: Fri Aug 10 10:42:25 2007 +0200
45252 Coding style cleanup
45254 Signed-off-by: Stefan Roese <sr@denx.de>
45256 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
45257 Author: Dirk Behme <dirk.behme@googlemail.com>
45258 Date: Thu Aug 2 17:42:08 2007 +0200
45260 Make use of generic 64bit division in nand_util.c
45262 Use generic 64bit division in nand_util.c. This makes nand_util.c
45263 independent of any toolchain 64bit division.
45265 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
45267 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
45268 Author: Dirk Behme <dirk.behme@googlemail.com>
45269 Date: Thu Aug 2 17:41:14 2007 +0200
45271 Move 64bit division from avr32 to generic lib
45273 Move the 64bit division from lib_avr32 to lib_generic. With this, all
45274 boards can do_div/__div64_32 if needed, not only avr one. Code is put
45275 to lib_generic, so no larger memory footprint if not used. No code
45276 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
45278 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
45280 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
45281 Author: Niklaus Giger <niklausgiger@gmx.ch>
45282 Date: Fri Jul 27 11:31:22 2007 +0200
45284 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
45286 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45288 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
45289 Author: Niklaus Giger <niklausgiger@gmx.ch>
45290 Date: Fri Jul 27 11:30:33 2007 +0200
45292 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
45294 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45296 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
45297 Author: Niklaus Giger <niklausgiger@gmx.ch>
45298 Date: Fri Jul 27 11:38:26 2007 +0200
45300 Add PPC4xx-HCU4 and HCU5 boards: common files
45302 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45304 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
45305 Author: Niklaus Giger <niklausgiger@gmx.ch>
45306 Date: Fri Jul 27 11:28:44 2007 +0200
45308 Add PPC4xx-HCU4 and HCU5 boards: make related
45310 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45312 commit 137fdd9f474ecb853efdace5200576308c67f18d
45313 Author: Niklaus Giger <niklausgiger@gmx.ch>
45314 Date: Fri Jul 27 11:28:03 2007 +0200
45316 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
45318 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45320 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
45321 Author: Niklaus Giger <niklausgiger@gmx.ch>
45322 Date: Fri Jul 27 11:27:15 2007 +0200
45324 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
45326 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45328 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
45329 Author: Niklaus Giger <niklausgiger@gmx.ch>
45330 Date: Fri Jul 27 11:25:31 2007 +0200
45332 Add PPC4xx-HCU4 and HCU5 boards: READMEs
45334 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45336 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
45337 Author: Niklaus Giger <niklausgiger@gmx.ch>
45338 Date: Fri Jul 27 11:37:40 2007 +0200
45340 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
45342 This series of patches adds support for 2 boards from Netstal Maschinen.
45344 The HCU4 has a PPC405Gpr and
45345 the HCU5 has a PPC440EPX.
45347 The HCU4 has a somehow complicated flash setup, as the booteprom is
45348 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
45351 The HCU5 has only a booteprom as the whole code will be downloaded from a
45352 different board which has HD, CD-ROM, etc and where all code is stored.
45354 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
45357 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
45359 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
45360 Author: Stefan Roese <sr@denx.de>
45361 Date: Fri Aug 10 08:42:55 2007 +0200
45363 ppc4xx: Update lwmon5 POST configuration
45365 Signed-off-by: Stefan Roese <sr@denx.de>
45367 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
45368 Author: Yuri Tikhonov <yur@emcraft.com>
45369 Date: Fri Aug 10 08:25:22 2007 +0200
45371 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
45373 The patch adds support for UART POST on ppc44x-based boards with no
45374 external serial clocks installed.
45376 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
45377 Acked-by: Stefan Roese <sr@denx.de>
45379 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
45380 Author: Kim Phillips <kim.phillips@freescale.com>
45381 Date: Mon Aug 6 18:18:34 2007 -0500
45383 mpc83xx: fix ITX[GP] O=builddir builds
45385 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
45387 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
45388 "BUILD_DIR=<some dir> ./MAKEALL ..."
45390 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45392 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
45393 Author: Dave Liu <r63238@freescale.com>
45394 Date: Wed Aug 1 15:00:59 2007 +0800
45396 mpc83xx: Correct the README for DDR ECC
45398 Update the README for DDR ECC, change the name
45399 to README.mpc83xx.ddrecc.
45401 Signed-off-by: Dave Liu <daveliu@freescale.com>
45402 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45404 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
45405 Author: Dave Liu <r63238@freescale.com>
45406 Date: Wed Aug 1 15:00:15 2007 +0800
45408 mpc83xx: Consolidate the ECC support of 83xx
45410 Remove the duplicated source code of ecc command on the <board>.c,
45411 for reused, move these code to cpu/mpc83xx directory.
45413 Signed-off-by: Dave Liu <daveliu@freescale.com>
45414 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45416 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
45417 Author: Dave Liu <r63238@freescale.com>
45418 Date: Sat Aug 4 13:37:39 2007 +0800
45420 mpc83xx: Correct the burst length for DDR2 with 32 bits
45422 The burst length should be 4 for DDR2 with 32 bits bus
45424 Signed-off-by: Dave Liu <daveliu@freescale.com>
45426 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
45427 Author: Kim Phillips <kim.phillips@freescale.com>
45428 Date: Wed Jul 25 19:25:33 2007 -0500
45430 mpc83xx: add support for the MPC8323E RDB
45432 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
45433 five 10/100 ethernet ports connected via an ICPlus IP175C
45434 switch, one PCI slot, and serial. Features not supported
45435 in this patch are SD card interface, 2 USB ports, and the
45438 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
45439 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45441 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
45442 Author: Kim Phillips <kim.phillips@freescale.com>
45443 Date: Wed Jul 25 19:25:28 2007 -0500
45445 mpc83xx: fixup generic pci for libfdt
45447 add libfdt support to the generic 83xx pci code
45449 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45451 commit f57ac7a7b37109245b69db80839ebee26179966a
45452 Author: Kim Phillips <kim.phillips@freescale.com>
45453 Date: Wed Jul 25 19:25:22 2007 -0500
45455 mpc83xx: fix 8360 and cpu functions to update fdt being passed
45457 ..and not the global fdt. Rename local fdt vars to blob so as not to
45458 be confused with the global var with the same three-letter name.
45460 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45462 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
45463 Author: Jerry Van Baren <gvb.uboot@gmail.com>
45464 Date: Wed Jul 4 21:34:24 2007 -0400
45466 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
45468 Several node strings were not correct (trailing slashes and properties
45470 Added setting of the timebase-frequency.
45471 Improved error messages and use debug() instead of printf().
45473 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
45474 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45476 commit 26d02c9bbac1751c5e19294f000100b48d43a920
45477 Author: Jerry Van Baren <gvb.uboot@gmail.com>
45478 Date: Wed Jul 4 21:27:30 2007 -0400
45480 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
45482 The new name matches more closely the kernel's name, which is also
45483 a much better description.
45485 These are the mpc83xx changes made necessary by the function name change.
45487 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
45488 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
45489 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45491 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
45492 Author: Dave Liu <daveliu@freescale.com>
45493 Date: Mon Jun 25 10:41:56 2007 +0800
45495 mpc83xx: Add support for the display of reset status
45497 83xx processor family has many reset sources, such as
45498 power on reset, software hard reset, software soft reset,
45499 JTAG, bus monitor, software watchdog, check stop reset,
45500 external hard reset, external software reset.
45501 sometimes, to figure out the fault of system, we need to
45502 know the cause of reset early before the prompt of
45505 Signed-off-by: Dave Liu <daveliu@freescale.com>
45506 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45508 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
45509 Author: Dave Liu <daveliu@freescale.com>
45510 Date: Mon Jun 25 10:41:04 2007 +0800
45512 mpc83xx: Fix the align bug of SDMA buffer
45514 According to the latest user manual, the SDMA temporary
45515 buffer base address must be 4KB aligned.
45517 Signed-off-by: Dave Liu <daveliu@freescale.com>
45518 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45520 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
45521 Author: Dave Liu <daveliu@freescale.com>
45522 Date: Mon Jun 25 13:21:12 2007 +0800
45524 mpc83xx: Revise the MPC8360EMDS readme doc
45526 When the rev2.x silicon mount on the MPC8360EMDS baord,
45527 and if you are using the u-boot version after the commit
45528 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
45529 to make the ethernet interface usable, we have to setup
45530 the jumpers correctly.
45532 Signed-off-by: Dave Liu <daveliu@freescale.com>
45533 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45535 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
45536 Author: Timur Tabi <timur@freescale.com>
45537 Date: Tue Jul 3 13:46:32 2007 -0500
45539 FSL I2C driver programs the two I2C busses differently
45541 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
45542 The second I2C bus has its slave address programmed incorrectly and is
45543 missing a 5-us delay.
45545 Signed-off-by: Timur Tabi <timur@freescale.com>
45546 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45548 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
45549 Author: Timur Tabi <timur@freescale.com>
45550 Date: Tue Jul 3 13:04:34 2007 -0500
45552 Update SCCR programming in cpu_init_f() to support all 83xx processors
45554 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
45555 bitfields for all 83xx processors. The code to update some bitfields was
45556 compiled only on some processors. Now, the bitfields are programmed as long
45557 as the corresponding CFG_SCCR option is defined in the board header file.
45558 This means that the board header file should not define any CFG_SCCR macros
45559 for bitfields that don't exist on that processor, otherwise the SCCR will be
45560 programmed incorrectly.
45562 Signed-off-by: Timur Tabi <timur@freescale.com>
45563 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45565 commit 9546266999f0b9b51372636614211b88d90f0f25
45566 Author: Martin Krause <martin.krause@tqs.de>
45567 Date: Fri Jun 22 13:04:22 2007 +0200
45569 TQM834x: cleanup configuraton
45571 Remove irritating #undef DEBUG
45573 Signed-off-by: Martin Krause <martin.krause@tqs.de>
45574 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45576 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
45577 Author: david.saada <David.Saada@ecitele.com>
45578 Date: Mon Jun 18 09:09:53 2007 -0700
45580 MPC83xx: Fix makefile to generate config.h file in the build directory
45582 MPC83xx: Fix the Makefile config sections to generate the include/config.h
45583 file in the build directory instead of the source directory.
45585 Signed-off-by: David Saada <david.saada@ecitele.com>
45586 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45588 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
45589 Author: Lee Nipper <Lee.Nipper@freescale.com>
45590 Date: Thu Jun 14 20:07:33 2007 -0500
45592 mpc83xx: Add support for 8360 silicon revision 2.1
45594 This change adds 8360 silicon revision 2.1 support to u-boot.
45596 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
45597 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45599 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
45600 Author: Kumar Gala <galak@kernel.crashing.org>
45601 Date: Wed Aug 8 04:14:28 2007 -0500
45603 Treat ppc64 host as ppc
45605 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
45607 commit 0dc4279b08ff82472bec2e2c90858602459febe8
45608 Author: Jason Jin <Jason.jin@freescale.com>
45609 Date: Wed Aug 8 09:01:46 2007 +0800
45611 Minor fix for bios emulator makefile
45613 Add $(obj) to LIB avoiding objects be built in the source dir
45615 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45617 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
45618 Author: Jason Jin <Jason.jin@freescale.com>
45619 Date: Wed Aug 8 08:33:11 2007 +0800
45621 Add CONFIG_BIOSEMU define to guard all the bios emulator code
45623 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45625 This patch fix the compile issue on the board that did not enable the bios emulator
45627 commit ed8106433522f2ea8933e9808346860d061d7731
45628 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
45629 Date: Tue Jul 31 12:27:25 2007 -0500
45631 tsec: fix multiple PHY support
45633 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
45634 broke multiple PHY support in tsec.c. This fixes it.
45636 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
45637 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45639 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
45640 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
45641 Date: Thu Aug 9 09:08:18 2007 -0500
45643 tsec: Allow Ten Bit Interface address to be configurable
45645 Allow the address of the Ten Bit Interface (TBI) to be changed in the
45646 event of a conflict with another device.
45648 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
45650 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
45651 Author: Stefan Roese <sr@denx.de>
45652 Date: Wed Aug 8 09:54:26 2007 +0200
45654 Coding style cleanup
45656 Signed-off-by: Stefan Roese <sr@denx.de>
45658 commit a41de1f0d373e09c782dea558385a06247111ba5
45659 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45660 Date: Sun Aug 5 05:15:18 2007 -0500
45662 Port enabled for I2C signals and chipselects port configuration.
45664 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45666 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
45667 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45668 Date: Sun Aug 5 04:31:18 2007 -0500
45672 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45674 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
45675 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45676 Date: Sun Aug 5 04:11:20 2007 -0500
45680 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45682 commit 99c03c175d2689093176facf17c58ce2cb320001
45683 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45684 Date: Sun Aug 5 03:58:52 2007 -0500
45686 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
45688 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45690 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
45691 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45692 Date: Sun Aug 5 03:55:21 2007 -0500
45694 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
45696 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45698 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
45699 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45700 Date: Sun Aug 5 03:43:30 2007 -0500
45702 Moved sync() from board file to include/asm-m68k/io.h
45704 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45706 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
45707 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45708 Date: Sun Aug 5 03:30:44 2007 -0500
45710 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
45712 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45714 commit 9998bd37ead85e93953559720710d3b0685c81e6
45715 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45716 Date: Sun Aug 5 03:19:10 2007 -0500
45718 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
45720 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45722 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
45723 Author: Jason Jin <Jason.jin@freescale.com>
45724 Date: Tue Aug 7 16:17:06 2007 +0800
45726 Add CONFIG_BIOSEMU define to guard all the bios emulator code
45728 This patch fix the compile issue on the board that did not enable the bios emulator
45730 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
45731 Author: Wolfgang Denk <wd@denx.de>
45732 Date: Tue Aug 7 16:02:13 2007 +0200
45734 Fix missing brace error in fs/fat/fat.c
45735 [pointed out by Roderik Wildenburg]
45737 Signed-off-by: Wolfgang Denk <wd@denx.de>
45739 commit 706714d97a0d08d59eda4de2268c39f504688329
45740 Author: Michal Simek <monstr@monstr.eu>
45741 Date: Mon Aug 6 23:41:53 2007 +0200
45743 [FIX] remove cute code
45745 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
45746 Author: Michal Simek <monstr@monstr.eu>
45747 Date: Mon Aug 6 23:35:26 2007 +0200
45749 [FIX] Fix romfs code
45751 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
45752 Author: Michal Simek <monstr@monstr.eu>
45753 Date: Mon Aug 6 23:31:49 2007 +0200
45755 [FIX] Coding style cleanup - Wolfgang's suggestions
45757 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
45758 Author: Wolfgang Denk <wd@denx.de>
45759 Date: Mon Aug 6 23:21:05 2007 +0200
45761 Fixed typo in README (pointed out by Martin Jost).
45763 Signed-off-by: Wolfgang Denk <wd@denx.de>
45765 commit 537223afa61f64480df31ce440a9cb386df4a814
45766 Author: Stefan Roese <sr@denx.de>
45767 Date: Mon Aug 6 21:10:17 2007 +0200
45769 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
45771 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
45772 here an updated Bamboo README.
45774 Signed-off-by: Stefan Roese <sr@denx.de>
45776 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
45777 Author: Wolfgang Denk <wd@denx.de>
45778 Date: Mon Aug 6 02:17:36 2007 +0200
45780 Coding style cleanup. Update CHANGELOG.
45782 Signed-off-by: Wolfgang Denk <wd@denx.de>
45784 commit 221838cc7eb178370ff62aa05920a582e12ac322
45785 Author: Jason Jin <Jason.jin@freescale.com>
45786 Date: Tue Jul 10 09:03:22 2007 +0800
45788 Remove the bios emulator from MAI board.
45790 The bios emulator in the MAI board can not pass compile
45791 and have a lot of crap in it. remove it and will have a
45792 clean and small bios emulator in the drivers directory
45793 which can be uesed for every board.
45795 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45797 commit 5618332409bb96f4448d1712899369fc80c0b489
45798 Author: Jason Jin <Jason.jin@freescale.com>
45799 Date: Fri Jul 13 12:14:59 2007 +0800
45801 Fix some compile issues for MAI board.
45803 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45805 commit 0f460a1ee148b648ee242c3157650287d4296260
45806 Author: Jason Jin <Jason.jin@freescale.com>
45807 Date: Fri Jul 13 12:14:58 2007 +0800
45809 Configurations for ATI video card BIOS emulator
45811 This patch add definition of the BIOS emulator and the ATI framebuffer
45812 driver for MPC8641HPCN board.
45814 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45815 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45817 commit ece92f85053b8df613edcf05b26a416cbc3d629c
45818 Author: Jason Jin <Jason.jin@freescale.com>
45819 Date: Fri Jul 6 08:34:56 2007 +0800
45821 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
45822 ATI video card BIOS. and can be used for x86 code emulation by some
45825 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45827 commit 5072188acabde3178fac7f5a597150e6e74fd40c
45828 Author: Jason Jin <Jason.jin@freescale.com>
45829 Date: Fri Jul 6 08:33:33 2007 +0800
45831 This is a framebuffer driver for ATI video card, can work for PCI9200,
45832 X300, X700, X800 ATI video cards.
45834 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45835 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45837 commit 5728be389e65fd47f34b33c2596271eb4db751ae
45838 Author: Wolfgang Denk <wd@denx.de>
45839 Date: Mon Aug 6 01:01:49 2007 +0200
45841 Coding style cleanup. Update CHANGELOG.
45843 Signed-off-by: Wolfgang Denk <wd@denx.de>
45845 commit 8092fef4c29b395958bb649647da7e3775731517
45846 Author: Martin Krause <Martin.Krause@tqs.de>
45847 Date: Tue Dec 12 14:26:01 2006 +0100
45849 Add functions to list of exported functions
45851 Additionally export the following fuctions (to make trab_config build again):
45855 Also bump the ABI version to reflect this change
45857 Signed-off-by: Martin Krause <martin.krause@tqs.de>
45859 commit 63cec5814fab5d2b1c86982327433807a5ac0249
45860 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
45861 Date: Thu Aug 2 14:09:49 2007 -0500
45863 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
45865 All of the PCI/PCI-Express driver and initialization code that
45866 was in the MPC8641HPCN port has now been moved into the common
45867 drivers/fsl_pci_init.c. In a subsequent patch, this will be
45868 utilized by the 85xx ports as well.
45870 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
45872 Also enable the second PCI-Express controller on 8641
45873 by getting its BATS and CFG_ setup right.
45875 Fixed a u16 vendor compiler warning in AHCI driver too.
45877 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
45878 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45879 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45881 commit a274ca4f6d68830e7c916f897561cff8c4101c38
45882 Author: Michal Simek <monstr@monstr.eu>
45883 Date: Sun Aug 5 22:33:05 2007 +0200
45885 [FIX] Coding style cleanup
45887 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
45888 Author: Michal Simek <monstr@monstr.eu>
45889 Date: Sun Aug 5 16:13:31 2007 +0200
45891 [FIX] Xilinx Uartlite driver
45892 Because PPC405 can use UARTLITE serial interface and
45893 Microblaze can use Uart16550 serial interface not only Uartlite.
45895 commit 98889edd50aadf862071eb5664747ad0d568a20e
45896 Author: Michal Simek <monstr@monstr.eu>
45897 Date: Sun Aug 5 15:54:53 2007 +0200
45899 [FIX] Change configuration for XUPV2P Microblaze board
45901 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
45902 Author: Michal Simek <monstr@monstr.eu>
45903 Date: Sun Aug 5 15:53:50 2007 +0200
45905 [PATCH] Added support for Xilinx Emac community driver
45907 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
45908 Author: Bartlomiej Sieka <tur@semihalf.com>
45909 Date: Fri Aug 3 12:08:16 2007 +0200
45911 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
45913 Add the ability for modules from the Schindler cm5200 family to use a
45914 single U-Boot image:
45915 - rename cm1_qp1 to cm5200
45916 - add run-time module detection
45917 - parametrize SDRAM configuration according to the module we are running on
45919 Few minor, board-specific fixes included in this patch:
45920 - better MAC address handling
45921 - updated default environment ('update' command uses +{filesize} now)
45922 - improved error messages in the auto-update code
45923 - allow booting U-Boot from RAM (CFG_RAMBOOT)
45925 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
45926 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
45927 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
45929 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
45930 Author: Andy Fleming <afleming@freescale.com>
45931 Date: Fri Aug 3 04:05:25 2007 -0500
45933 Add Marvell 1149 PHY support to the TSEC
45935 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
45936 Author: Wolfgang Denk <wd@denx.de>
45937 Date: Thu Aug 2 21:27:46 2007 +0200
45939 Coding style cleanup, update CHANGELOG
45941 Signed-off-by: Wolfgang Denk <wd@denx.de>
45943 commit 63e22764d2f8653f68888c667eb65b3996b52680
45944 Author: Wolfgang Denk <wd@denx.de>
45945 Date: Thu Aug 2 10:11:18 2007 +0200
45947 Minor cleanup of <board>_nand build rules.
45949 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
45950 Author: Stefan Roese <sr@denx.de>
45951 Date: Thu Aug 2 08:33:56 2007 +0200
45953 ppc4xx: Code cleanup
45955 Signed-off-by: Stefan Roese <sr@denx.de>
45957 commit c92409812206ac67a7fa7aae298539a9c3804a46
45958 Author: Grzegorz Bernacki <gjb@semihalf.com>
45959 Date: Tue Jul 31 18:51:48 2007 +0200
45961 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
45963 During config transactions on the PCIe bus an attempt to scan for a
45964 non-existent device can lead to a machine check exception with certain
45965 peripheral devices. In order to avoid crashing in such scenarios the
45966 instrumented versions of the config cycle read routines are introduced, so
45967 the exceptions fixups framework can gracefully recover.
45969 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
45970 Acked-by: Rafal Jaworowski <raj@semihalf.com>
45972 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
45973 Author: Rafal Jaworowski <raj@semihalf.com>
45974 Date: Tue Jul 31 18:19:54 2007 +0200
45976 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
45978 This brings back separate settings for PCIe bus numbers depending on chip
45979 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
45980 commit. 440SPe rev. A does NOT work properly with the same settings as for
45981 the rev. B (no devices are seen on the bus during enumeration).
45983 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
45985 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
45986 Author: Wolfgang Denk <wd@denx.de>
45987 Date: Thu Aug 2 00:48:45 2007 +0200
45989 Fix build errors and warnings / code cleanup.
45991 Signed-off-by: Wolfgang Denk <wd@denx.de>
45993 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
45994 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
45995 Date: Tue Jul 31 10:24:56 2007 +0200
45997 ppc4xx: Update AMCC Bamboo 440EP support
45999 Changed storage type of cfg_simulate_spd_eeprom to const
46000 Changed storage type of gpio_tab to stack storage
46001 (Cannot access global data declarations in .bss until afer code relocation)
46003 Improved SDRAM tests to catch problems where data is not uniquely addressable
46004 (e.g. incorrectly programmed SDRAM row or columns)
46006 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
46007 Fixed AM29LV320DT (OpCode Flash) sector map
46009 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
46010 Signed-off-by: Stefan Roese <sr@denx.de>
46012 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
46013 Author: Stefan Roese <sr@denx.de>
46014 Date: Tue Jul 31 08:37:01 2007 +0200
46016 ppc4xx: Update 440EPx lwmon5 board support
46018 - Clear ECC status regs after ECC POST test
46019 - Set dcbz for ECC generation with caches enabled as default
46022 Signed-off-by: Stefan Roese <sr@denx.de>
46024 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
46025 Author: Stefan Roese <sr@denx.de>
46026 Date: Mon Jul 30 11:04:57 2007 +0200
46028 ppc4xx: Only print ECC related info when the error bis are set
46030 Signed-off-by: Stefan Roese <sr@denx.de>
46032 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
46033 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
46034 Date: Fri Jul 27 16:44:31 2007 +0200
46036 new FPGA image for PLU405 board
46038 new FPGA image for PLU405 board with improved CompactFlash timing
46040 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
46042 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
46043 Author: Rafal Jaworowski <raj@semihalf.com>
46044 Date: Fri Jul 27 14:43:59 2007 +0200
46046 [ADS5121] Support for the ADS5121 board
46048 The following MPC5121e subsystems are supported:
46050 - low-level CPU init
46051 - NOR Boot Flash (common CFI driver)
46057 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
46058 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
46059 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
46061 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
46062 Author: Rafal Jaworowski <raj@semihalf.com>
46063 Date: Fri Jul 27 14:22:04 2007 +0200
46065 [PPC] Remove unused MSR_USER definition
46067 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
46069 commit d4024bb72dd81695ec099b2199eda0d27c623e62
46070 Author: John Otken <john@softadvances.com>
46071 Date: Thu Jul 26 17:49:11 2007 +0200
46073 ppc4xx: Add support for AMCC 405EP Taihu board
46075 Signed-off-by: John Otken <john@softadvances.com>
46077 commit b66091de6c7390620312c2501db23d8391e7cabb
46078 Author: Anatolij Gustschin <agust@denx.de>
46079 Date: Thu Jul 26 15:08:01 2007 +0200
46081 ppc4xx: lwmon5: Update Lime initialization
46083 Change Lime SDRAM initialization to now support 100MHz and
46084 133MHz (if enabled). Also the framebuffer is initialized to
46085 display a blue rectangle with a white border.
46087 Signed-off-by: Anatolij Gustschin <agust@denx.de>
46088 Signed-off-by: Stefan Roese <sr@denx.de>
46090 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
46091 Author: Stefan Roese <sr@denx.de>
46092 Date: Tue Jul 24 09:52:52 2007 +0200
46094 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
46096 The used Intel NOR FLASH chips have internally two dies, and are now
46097 treated as two seperate chips.
46099 Signed-off-by: Stefan Roese <sr@denx.de>
46101 commit aedf5bde179ecfbd0a96130d18996a96518b785f
46102 Author: Stefan Roese <sr@denx.de>
46103 Date: Tue Jul 24 07:20:09 2007 +0200
46105 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
46107 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
46108 interrupt controller.
46110 Signed-off-by: Stefan Roese <sr@denx.de>
46112 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
46113 Author: Stefan Roese <sr@denx.de>
46114 Date: Fri Jul 20 15:03:44 2007 +0200
46116 ppc4xx: Fix bug with default GPIO output value
46118 As spotted by Matthias Fuchs, the default output values for all GPIO1
46119 outputs were not setup correctly. This patch fixes this issue.
46121 Signed-off-by: Stefan Roese <sr@denx.de>
46123 commit 531e3e8b831f357056448fa573137d5fb37000fd
46124 Author: Pavel Kolesnikov <concord@emcraft.com>
46125 Date: Fri Jul 20 15:03:03 2007 +0200
46127 POST: Add ECC POST for the lwmon5 board
46129 This patch adds ECC Post test for the Lwmon5 board based
46130 on PPC440EPx to U-Boot.
46132 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
46133 Acked-by: Yuri Tikhonov <yur@emcraft.com>
46134 Acked-by: Stefan Roese <sr@denx.de>
46136 commit cc3023b9f95d7ac959a764471a65001062aecf41
46137 Author: Rafal Jaworowski <raj@semihalf.com>
46138 Date: Thu Jul 19 17:12:28 2007 +0200
46140 Fix breakage of 8xx boards from recent commit.
46142 This patch fixes the negative consequences for 8xx of the recent
46143 "ppc4xx: Clean up 440 exceptions handling" commit.
46145 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
46147 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
46148 Author: Stefan Roese <sr@denx.de>
46149 Date: Mon Jul 16 13:11:12 2007 +0200
46151 Coding style cleanup
46153 Signed-off-by: Stefan Roese <sr@denx.de>
46155 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
46156 Author: Stefan Roese <sr@denx.de>
46157 Date: Mon Jul 16 10:02:12 2007 +0200
46159 ppc4xx: Code cleanup
46161 Signed-off-by: Stefan Roese <sr@denx.de>
46163 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
46164 Author: Stefan Roese <sr@denx.de>
46165 Date: Mon Jul 16 10:01:38 2007 +0200
46167 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
46169 Signed-off-by: Stefan Roese <sr@denx.de>
46171 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
46172 Author: Stefan Roese <sr@denx.de>
46173 Date: Mon Jul 16 10:00:43 2007 +0200
46175 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
46177 The new boardspecific DDR2 controller configuration is used for the Yucca
46178 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
46180 Signed-off-by: Stefan Roese <sr@denx.de>
46182 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
46183 Author: Stefan Roese <sr@denx.de>
46184 Date: Mon Jul 16 09:57:00 2007 +0200
46186 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
46188 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
46189 support non default, boardspecific DDR(2) controller configuration.
46191 Signed-off-by: Stefan Roese <sr@denx.de>
46193 commit 5743a9207a370b90f09b20ebd61167c806b937f3
46194 Author: Stefan Roese <sr@denx.de>
46195 Date: Mon Jul 16 08:53:51 2007 +0200
46197 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
46199 The new function remove_tlb() can be used to remove the TLB's used to
46200 map a specific memory region. This is especially useful for the DDR(2)
46201 setup routines which configure the SDRAM area temporarily as a cached
46202 area (for speedup on auto-calibration and ECC generation) and later
46203 need this area uncached for normal usage.
46205 Signed-off-by: Stefan Roese <sr@denx.de>
46207 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
46208 Author: Michal Simek <monstr@monstr.eu>
46209 Date: Mon Jul 16 00:31:07 2007 +0200
46211 [PATCH] Support for Xilinx EmacLite controller
46213 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
46214 Author: Wolfgang Denk <wd@denx.de>
46215 Date: Sat Jul 14 22:51:02 2007 +0200
46219 Signed-off-by: Wolfgang Denk <wd@denx.de>
46221 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
46222 Author: Michal Simek <monstr@monstr.eu>
46223 Date: Sat Jul 14 13:11:28 2007 +0200
46225 [FIX] support for simply measuring time
46227 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
46228 Author: Michal Simek <monstr@monstr.eu>
46229 Date: Sat Jul 14 12:41:23 2007 +0200
46231 [FS] Added support for ROMFS
46233 commit 011595307731a7a67a7445d107c279d031e8ab97
46234 Author: Heiko Schocher <hs@pollux.denx.de>
46235 Date: Sat Jul 14 01:06:58 2007 +0200
46237 [PCS440EP] - fix compile error, if BUILD_DIR is used
46239 commit 5a2f1098d81ad58b309e5e558d0492643166a799
46240 Author: Michal Simek <monstr@monstr.eu>
46241 Date: Sat Jul 14 00:18:48 2007 +0200
46243 [PATCH] Support time without timer
46245 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
46246 Author: Michal Simek <monstr@monstr.eu>
46247 Date: Fri Jul 13 21:43:55 2007 +0200
46249 [PATCH] Remove problem with disabled BARREL SHIFTER
46251 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
46252 Author: Michal Simek <monstr@monstr.eu>
46253 Date: Fri Jul 13 21:41:44 2007 +0200
46255 [FIX] correct help for rspr
46257 commit fad63407154f46246ce80d53a9c669a44362ac67
46258 Author: Heiko Schocher <hs@pollux.denx.de>
46259 Date: Fri Jul 13 09:54:17 2007 +0200
46261 make show_boot_progress () weak.
46263 Signed-off-by: Heiko Schocher <hs@denx.de>
46265 commit 907902472391b6ca1876ec300687562ecaf459b1
46266 Author: Heiko Schocher <hs@pollux.denx.de>
46267 Date: Fri Jul 13 08:26:05 2007 +0200
46269 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
46270 - fix compile error, if BUILD_DIR is used
46272 Signed-off-by: Heiko Schocher <hs@denx.de>
46274 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
46275 Author: Stefan Roese <sr@denx.de>
46276 Date: Thu Jul 12 16:32:08 2007 +0200
46278 ppc4xx: Change receive buffer handling in the 4xx emac driver
46280 This change fixes a bug in the receive buffer handling, that
46281 could lead to problems upon high network traffic (broadcasts...).
46283 Signed-off-by: Stefan Roese <sr@denx.de>
46285 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
46286 Author: Wolfgang Denk <wd@denx.de>
46287 Date: Thu Jul 12 01:45:34 2007 +0200
46289 Update CHANGELOG, minor coding style cleanup.
46291 Signed-off-by: Wolfgang Denk <wd@denx.de>
46293 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
46294 Author: Andy Fleming <afleming@freescale.com>
46295 Date: Fri Jun 8 16:41:18 2007 -0500
46297 Remove erroneous errata code from Marvel 88E1111S driver
46299 The Marvel 88E1111S driver for the TSEC was copied from the
46300 88E1101 driver, and included a fix for an erratum which does not
46301 exist on that part. Now it is removed
46303 Signed-off-by: Andy Fleming <afleming@freescale.com>
46305 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
46306 Author: Andy Fleming <afleming@freescale.com>
46307 Date: Tue Jun 5 16:38:44 2007 -0500
46309 From: eran liberty <eran.liberty@gmail.com>
46311 adds the reset register to 85xx immap
46313 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
46314 Signed-off-by: Andy Fleming <afleming@freescale.com>
46316 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
46317 Author: Andy Fleming <afleming@freescale.com>
46318 Date: Thu May 10 17:50:01 2007 -0500
46320 Polished the 85xx ADS config files
46322 Made the boot commands use device trees by default.
46323 Also moved the ramdisk to 1000000 (I think the previous address
46324 was getting overridden during boot).
46326 Signed-off-by: Andy Fleming <afleming@freescale.com>
46328 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
46329 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46330 Date: Wed May 9 11:03:32 2007 -0500
46332 8544ds: Fix Makefile after moving pixis to board/freescale.
46334 The OBJTREE != SRCTREE build scenario was broken.
46337 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46338 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46340 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
46341 Author: Andy Fleming <afleming@freescale.com>
46342 Date: Wed May 9 00:54:20 2007 -0500
46344 tsec: Fix PHY code to match first driver
46346 Jarrold Wen noticed that the generic PHY code always matches
46347 under the current implementation. Change it so the first match
46348 wins, and *only* unknown PHYs trigger the generic driver
46350 Signed-off-by: Andy Fleming <afleming@freescale.com>
46352 commit ccc091aac61a38cd998d575d92f7232e256d6312
46353 Author: Andy Fleming <afleming@freescale.com>
46354 Date: Tue May 8 17:27:43 2007 -0500
46356 Add support for CPM device tree configuration to 8560 ADS
46358 * Adds code to modify CPM frequencies
46359 * Cleans up the config file to #define TSEC and (for now) #undef FCC
46360 * Adds the MII command for all 8560 ADS configurations
46361 * Updates config file to provide convenience commands for booting
46364 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
46365 Signed-off-by: Andy Fleming <afleming@freescale.com>
46367 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
46368 Author: Andy Fleming <afleming@freescale.com>
46369 Date: Tue May 8 17:23:02 2007 -0500
46371 Fix Marvell 88e1145 PHY init code
46373 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
46374 where the reset was being done after the errata code instead of
46377 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
46378 Signed-off-by: Andy Fleming <afleming@freescale.com>
46380 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
46381 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46382 Date: Wed Jul 11 14:52:16 2007 -0500
46384 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
46386 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46388 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
46389 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46390 Date: Wed Jul 11 14:52:08 2007 -0500
46392 pciauto setup bridge
46394 The P2P bridge bus numbers programmed into the device are relative to
46397 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46399 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
46400 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46401 Date: Wed Jul 11 14:52:01 2007 -0500
46403 Support PCIe extended config registers
46405 FSL PCIe block has extended cfg registers in the 100 and 400 range.
46406 For example, to read the LTSSM register: pci display <busn>.0 404 1
46408 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46410 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
46411 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46412 Date: Wed Jul 11 14:51:48 2007 -0500
46414 Minor improvements to drivers/pci_auto.c
46416 - Make pciauto_{pre,post}scan_setup_bridge non-static
46417 - Added physical address display in debug messages.
46419 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46421 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
46422 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46423 Date: Wed Jul 11 14:51:35 2007 -0500
46425 Start pci hose scan from hose->current_busno.
46427 Ensure hose->current_busno is not less than first_busno. This fixes
46428 broken board code which leaves current_busno=0 when first_busno is
46429 greater than 0 for the cases with multiple controllers.
46431 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46433 commit 3865b1fb7843a08ad49a6319a36415752276ff48
46434 Author: Stefan Roese <sr@denx.de>
46435 Date: Wed Jul 11 12:13:53 2007 +0200
46437 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
46439 Signed-off-by: Stefan Roese <sr@denx.de>
46441 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
46442 Author: Bartlomiej Sieka <tur@semihalf.com>
46443 Date: Wed Jul 11 20:11:07 2007 +0200
46445 CM1.QP1: Support for the Schindler CM1.QP1 board.
46447 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
46448 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
46450 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
46451 Author: Heiko Schocher <hs@pollux.denx.de>
46452 Date: Wed Jul 11 18:39:11 2007 +0200
46454 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
46455 - now the Flash ST M29W040B is supported (not tested)
46456 - fix the "led" command
46457 - fix compile error, if BUILD_DIR is used
46459 Signed-off-by: Heiko Schocher <hs@denx.de>
46461 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
46462 Author: Stefan Roese <sr@denx.de>
46463 Date: Sun Jul 8 13:44:27 2007 +0200
46465 Fix malloc problem introduced with the relocation fixup for the PPC platform
46467 The relocation fixup didn't handle the malloc pointer initialization
46468 correctly. This patch fixes this problem. Tested successfully on 4xx.
46469 The relocation fixup patches for 4xx will follow soon.
46471 Signed-off-by: Stefan Roese <sr@denx.de>
46473 commit 0dca874db62718e41253659e60f3a1de7eb418ce
46474 Author: TsiChung <tcliew@Goku.(none)>
46475 Date: Tue Jul 10 15:45:43 2007 -0500
46477 Cache update and added CFG_UNIFY_CACHE
46479 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
46481 Signed-off-by: TsiChung <tcliew@Goku.(none)>
46483 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
46484 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46485 Date: Thu Jul 5 23:36:16 2007 -0500
46487 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
46489 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
46491 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46493 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
46494 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46495 Date: Thu Jul 5 23:31:25 2007 -0500
46497 Update header files
46499 Include immap.h and renamed mcfrtc.h to rtc.h
46501 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46503 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
46504 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46505 Date: Thu Jul 5 23:29:21 2007 -0500
46507 Add mcffec_initialize()
46509 Added mcffec_initialize() in eth_initialize()
46511 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46513 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
46514 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46515 Date: Thu Jul 5 23:27:40 2007 -0500
46517 Update header file and clean up
46521 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46523 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
46524 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46525 Date: Thu Jul 5 23:23:15 2007 -0500
46527 New uart structure and defines
46529 Seperated from mcfuart.h
46531 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46533 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
46534 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46535 Date: Thu Jul 5 23:22:31 2007 -0500
46537 New timer structure and defines
46539 Seperated from mcftimer.h
46541 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46543 commit e04acb2eba4782489417240eff76e20e176aec10
46544 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46545 Date: Thu Jul 5 23:21:09 2007 -0500
46547 Rename mcfrtc to rtc
46549 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
46551 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46553 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
46554 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46555 Date: Thu Jul 5 23:17:36 2007 -0500
46557 Rename mcfserial.c. Update include header
46559 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
46561 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46563 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
46564 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46565 Date: Thu Jul 5 23:13:58 2007 -0500
46567 Header file update, clean up and cache handling
46569 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
46571 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46573 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
46574 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46575 Date: Thu Jul 5 23:10:40 2007 -0500
46577 Create interrupts.c and modify Makefile
46579 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
46581 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46583 commit ddd104f1ed655eda50c06ba636237a83ed943f34
46584 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46585 Date: Thu Jul 5 23:06:55 2007 -0500
46589 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46591 commit b9bf3de377b2bae70c983c9b97feae914999e735
46592 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46593 Date: Thu Jul 5 23:05:31 2007 -0500
46595 Update header file and some clean up
46597 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
46599 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46601 commit 84a015b52ec820a5ae173717d78516de731c89c2
46602 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46603 Date: Thu Jul 5 23:03:28 2007 -0500
46605 Update header file and enable icache
46607 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
46609 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46611 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
46612 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46613 Date: Thu Jul 5 23:01:22 2007 -0500
46615 Update header file and removed interrupt_init()
46617 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
46619 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46621 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
46622 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46623 Date: Thu Jul 5 22:57:46 2007 -0500
46625 Update for flash.o and mii.o
46627 Removed flash.o and added mii.o
46629 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46631 commit c5ded275d839e4ff79f41718d50a835d989f57bc
46632 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46633 Date: Thu Jul 5 22:56:19 2007 -0500
46635 MII functions calls.
46637 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46639 commit 427c814104560e29bda14955c67703245aaaa5b4
46640 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46641 Date: Thu Jul 5 22:54:42 2007 -0500
46643 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
46645 The removed MII routines will be placed in mii.c.
46647 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46649 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
46650 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46651 Date: Thu Jul 5 22:51:05 2007 -0500
46655 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
46657 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46659 commit 2744354a8437b8f78db178e30660215688bff570
46660 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46661 Date: Thu Jul 5 22:46:38 2007 -0500
46663 Seperate old structure defines and new structure defines
46665 Removed new uart structure and defines to uart.h
46667 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46669 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
46670 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46671 Date: Thu Jul 5 22:45:01 2007 -0500
46673 Seperate old structure defines and new structure defines
46675 New timer structure and defines will move to new timer.h
46677 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46679 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
46680 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46681 Date: Thu Jul 5 22:42:23 2007 -0500
46687 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46689 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
46690 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46691 Date: Thu Jul 5 22:41:24 2007 -0500
46695 Replaced whitespace with tabs
46697 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46699 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
46700 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46701 Date: Thu Jul 5 22:39:07 2007 -0500
46703 Create new header file and move peripherals base address from configs file to new header file.
46705 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
46707 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46709 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
46710 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46711 Date: Thu Jul 5 22:24:58 2007 -0500
46715 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
46717 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46719 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
46720 Author: Jon Loeliger <jdl@freescale.com>
46721 Date: Tue Jul 10 11:19:50 2007 -0500
46723 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
46725 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46726 Those always evaluated TRUE, and thus were always compiled
46727 even when IDE really wasn't defined/wanted.
46729 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46731 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
46732 Author: Jon Loeliger <jdl@freescale.com>
46733 Date: Tue Jul 10 11:13:21 2007 -0500
46735 drivers/: Remove lingering references to CFG_CMD_* symbols.
46737 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46738 Those always evaluated TRUE, and thus were always compiled
46739 even when IDE really wasn't defined/wanted.
46741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46743 commit f40a7f3e3888b42a43674b099e5470022c8c544c
46744 Author: Jon Loeliger <jdl@freescale.com>
46745 Date: Tue Jul 10 11:07:56 2007 -0500
46747 fs/: Remove lingering references to CFG_CMD_* symbols.
46749 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46750 Those always evaluated TRUE, and thus were always compiled
46751 even when IDE really wasn't defined/wanted.
46753 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46755 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
46756 Author: Jon Loeliger <jdl@freescale.com>
46757 Date: Tue Jul 10 11:05:02 2007 -0500
46759 net/: Remove lingering references to CFG_CMD_* symbols.
46761 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46762 Those always evaluated TRUE, and thus were always compiled
46763 even when IDE really wasn't defined/wanted.
46765 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46767 commit 902531788376046da212afd1661cffb62f3daa1c
46768 Author: Jon Loeliger <jdl@freescale.com>
46769 Date: Tue Jul 10 11:02:44 2007 -0500
46771 common/: Remove lingering references to CFG_CMD_* symbols.
46773 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46774 Those always evaluated TRUE, and thus were always compiled
46775 even when IDE really wasn't defined/wanted.
46777 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46779 commit d39b57415838c73fb0a37eca84de3c68ba990586
46780 Author: Jon Loeliger <jdl@freescale.com>
46781 Date: Tue Jul 10 10:48:22 2007 -0500
46783 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
46785 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46786 Those always evaluated TRUE, and thus were always compiled
46787 even when IDE really wasn't defined/wanted.
46789 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46791 commit 77a318545d57aefa844752465b94c7e09a3f26d0
46792 Author: Jon Loeliger <jdl@freescale.com>
46793 Date: Tue Jul 10 10:39:10 2007 -0500
46795 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
46797 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
46798 Those always evaluated TRUE, and thus were always compiled
46799 even when IDE really wasn't defined/wanted.
46801 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46803 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
46804 Author: Jon Loeliger <jdl@freescale.com>
46805 Date: Tue Jul 10 10:27:39 2007 -0500
46807 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
46809 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46811 commit 079a136c3588814784561d6e4856970ee82d6e2a
46812 Author: Jon Loeliger <jdl@freescale.com>
46813 Date: Tue Jul 10 10:12:10 2007 -0500
46815 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
46817 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
46818 used to be included but CONFIG_BOOTP_MASK was not defined.
46820 Remove lingering references to CFG_CMD_* symbols.
46822 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46824 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
46825 Author: Jon Loeliger <jdl@freescale.com>
46826 Date: Tue Jul 10 09:38:02 2007 -0500
46828 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
46830 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
46831 used to be included but CONFIG_BOOTP_MASK was not defined.
46833 Remove lingering references to CFG_CMD_* symbols.
46835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46837 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
46838 Author: Jon Loeliger <jdl@freescale.com>
46839 Date: Tue Jul 10 09:29:01 2007 -0500
46841 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
46843 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
46844 used to be included but CONFIG_BOOTP_MASK was not defined.
46846 Remove lingering references to CFG_CMD_* symbols.
46848 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46850 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
46851 Author: Jon Loeliger <jdl@freescale.com>
46852 Date: Tue Jul 10 09:22:23 2007 -0500
46854 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
46856 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
46857 used to be included but CONFIG_BOOTP_MASK was not defined.
46859 Remove lingering references to CFG_CMD_* symbols.
46861 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46863 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
46864 Author: Jon Loeliger <jdl@freescale.com>
46865 Date: Tue Jul 10 09:10:49 2007 -0500
46867 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
46869 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
46870 used to be included but CONFIG_BOOTP_MASK was not defined.
46872 Remove lingering references to CFG_CMD_* symbols.
46874 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46876 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
46877 Author: Jon Loeliger <jdl@freescale.com>
46878 Date: Tue Jul 10 09:02:57 2007 -0500
46880 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
46882 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
46883 used to be included but CONFIG_BOOTP_MASK was not defined.
46885 Remove lingering references to CFG_CMD_* symbols.
46887 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46889 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
46890 Author: Jon Loeliger <jdl@freescale.com>
46891 Date: Mon Jul 9 22:08:34 2007 -0500
46893 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
46895 All of the choices for CONFIG_BOOTP_ are now documented in
46896 the README file. You must now individually select exactly
46897 the set that you want using a series of
46898 #define CONFIG_BOOTP_<x>
46899 statements in the board port config files now.
46901 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46903 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
46904 Author: Jon Loeliger <jdl@freescale.com>
46905 Date: Mon Jul 9 21:57:31 2007 -0500
46907 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
46909 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46911 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
46912 Author: Jon Loeliger <jdl@freescale.com>
46913 Date: Mon Jul 9 21:48:26 2007 -0500
46915 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
46917 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46919 commit 37d4bb70586659dedef1658ce1bed071be098aec
46920 Author: Jon Loeliger <jdl@freescale.com>
46921 Date: Mon Jul 9 21:38:02 2007 -0500
46923 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
46925 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46927 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
46928 Author: Jon Loeliger <jdl@freescale.com>
46929 Date: Mon Jul 9 21:31:24 2007 -0500
46931 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
46933 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46935 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
46936 Author: Jon Loeliger <jdl@freescale.com>
46937 Date: Mon Jul 9 21:24:19 2007 -0500
46939 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
46941 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46943 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
46944 Author: Jon Loeliger <jdl@freescale.com>
46945 Date: Mon Jul 9 21:16:53 2007 -0500
46947 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
46949 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46951 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
46952 Author: Jon Loeliger <jdl@freescale.com>
46953 Date: Mon Jul 9 19:12:30 2007 -0500
46955 Retire CONFIG_COMMANDS finally.
46956 Strip old CFG_CMD_* symbols out.
46958 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46960 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
46961 Author: Jon Loeliger <jdl@freescale.com>
46962 Date: Mon Jul 9 19:10:03 2007 -0500
46964 Update README.* to reference new CONFIG_CMD_* names now.
46966 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46968 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
46969 Author: Jon Loeliger <jdl@freescale.com>
46970 Date: Mon Jul 9 19:06:00 2007 -0500
46972 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
46974 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46976 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
46977 Author: Jon Loeliger <jdl@freescale.com>
46978 Date: Mon Jul 9 18:57:22 2007 -0500
46980 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
46982 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46984 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
46985 Author: Jon Loeliger <jdl@freescale.com>
46986 Date: Mon Jul 9 18:45:16 2007 -0500
46988 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
46990 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46992 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
46993 Author: Jon Loeliger <jdl@freescale.com>
46994 Date: Mon Jul 9 18:38:39 2007 -0500
46996 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
46998 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47000 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
47001 Author: Jon Loeliger <jdl@freescale.com>
47002 Date: Mon Jul 9 18:31:28 2007 -0500
47004 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
47006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47008 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
47009 Author: Jon Loeliger <jdl@freescale.com>
47010 Date: Mon Jul 9 18:24:55 2007 -0500
47012 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
47014 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47016 commit fcec2eb93e126400009729328e797f12bc94f1fd
47017 Author: Jon Loeliger <jdl@freescale.com>
47018 Date: Mon Jul 9 18:19:09 2007 -0500
47020 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
47022 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47024 commit a593814f2be0c9cdc3133cd550b167b8a988328f
47025 Author: Jon Loeliger <jdl@freescale.com>
47026 Date: Mon Jul 9 18:10:50 2007 -0500
47028 rtc/: Remove obsolete references to CONFIG_COMMANDS
47030 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47032 commit 67350568f9d46e66c21829f3513b3db0caeb948b
47033 Author: Jon Loeliger <jdl@freescale.com>
47034 Date: Mon Jul 9 18:05:38 2007 -0500
47036 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
47038 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47040 commit 7def6b34f910f08d7ef0a14646da067719237ca2
47041 Author: Jon Loeliger <jdl@freescale.com>
47042 Date: Mon Jul 9 18:02:11 2007 -0500
47044 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
47046 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47048 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
47049 Author: Jon Loeliger <jdl@freescale.com>
47050 Date: Mon Jul 9 17:56:50 2007 -0500
47052 fs/: Remove obsolete references to CONFIG_COMMANDS
47054 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47056 commit c91898bbc505aff3e12a807af88e76da18efb7ee
47057 Author: Jon Loeliger <jdl@freescale.com>
47058 Date: Mon Jul 9 17:46:09 2007 -0500
47060 tools/: Remove obsolete references to CONFIG_COMMANDS
47062 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47064 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
47065 Author: Jon Loeliger <jdl@freescale.com>
47066 Date: Mon Jul 9 17:45:14 2007 -0500
47068 net/: Remove obsolete references to CONFIG_COMMANDS
47070 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47072 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
47073 Author: Jon Loeliger <jdl@freescale.com>
47074 Date: Mon Jul 9 17:39:42 2007 -0500
47076 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
47078 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47080 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
47081 Author: Jon Loeliger <jdl@freescale.com>
47082 Date: Mon Jul 9 17:30:01 2007 -0500
47084 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
47086 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47088 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
47089 Author: Jon Loeliger <jdl@freescale.com>
47090 Date: Mon Jul 9 17:22:37 2007 -0500
47092 disk/: Remove obsolete references to CONFIG_COMMANDS
47094 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47096 commit 639221c76c88215bd55af83ad174fc30d1940f8f
47097 Author: Jon Loeliger <jdl@freescale.com>
47098 Date: Mon Jul 9 17:15:49 2007 -0500
47100 include/: Remove obsolete references to CONFIG_COMMANDS
47101 Mostly removed from comments here.
47103 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47105 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
47106 Author: Wolfgang Denk <wd@denx.de>
47107 Date: Tue Jul 10 00:01:28 2007 +0200
47109 Coding style cleanup; update CHANGELOG.
47111 Signed-off-by: Wolfgang Denk <wd@denx.de>
47113 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
47114 Author: Stefan Roese <sr@denx.de>
47115 Date: Mon Jul 9 11:00:24 2007 +0200
47117 Small coding style cleanup
47119 Signed-off-by: Stefan Roese <sr@denx.de>
47121 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
47122 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47123 Date: Mon Jul 9 10:10:08 2007 +0200
47125 Migrate esd 405EP boards to new NAND subsystem
47127 Remove unused CFG_NAND_LEGACY define
47129 These boards to not have NAND.
47131 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47133 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
47134 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47135 Date: Mon Jul 9 10:10:06 2007 +0200
47137 Migrate esd 405EP boards to new NAND subsystem
47139 Migrate esd 405EP boards to new NAND subsystem
47142 -use correct io accessors (in/out_be32())
47144 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47146 commit e09f7ab5749c345f924da272bea0521a73af5b11
47147 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47148 Date: Mon Jul 9 10:10:04 2007 +0200
47150 Migrate esd 405EP boards to new NAND subsystem
47152 This patch prepares the migration from the legacy NAND driver
47153 to U-Boot's new NAND subsystem for esd boards.
47155 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47157 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
47158 Author: Jon Loeliger <jdl@freescale.com>
47159 Date: Sun Jul 8 18:10:08 2007 -0500
47161 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
47163 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47165 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
47166 Author: Jon Loeliger <jdl@freescale.com>
47167 Date: Sun Jul 8 18:05:39 2007 -0500
47169 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
47171 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47173 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
47174 Author: Jon Loeliger <jdl@freescale.com>
47175 Date: Sun Jul 8 18:02:23 2007 -0500
47177 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
47179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47181 commit baa26db4113679b80970ff447d91cc10217742a6
47182 Author: Jon Loeliger <jdl@freescale.com>
47183 Date: Sun Jul 8 17:51:39 2007 -0500
47185 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
47187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47189 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
47190 Author: Jon Loeliger <jdl@freescale.com>
47191 Date: Sun Jul 8 17:02:01 2007 -0500
47193 Clear up confusion over the CMD_POST and POST_DIAG mess.
47195 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
47196 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
47197 Clear this mess up some.
47199 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47201 commit b3631487105a57ab7cbadfc26efbaf9676275018
47202 Author: Jon Loeliger <jdl@freescale.com>
47203 Date: Sun Jul 8 15:45:08 2007 -0500
47205 Remove references to the old cmd_confdefs.h include file.
47207 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47209 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
47210 Author: Jon Loeliger <jdl@freescale.com>
47211 Date: Sun Jul 8 15:42:59 2007 -0500
47213 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
47215 Use new CONFIG_CMD_* in lwmon5.h board config file.
47216 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
47218 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47220 commit a5562901661bd428f7e5feb333f796372cb81019
47221 Author: Jon Loeliger <jdl@freescale.com>
47222 Date: Sun Jul 8 15:31:57 2007 -0500
47224 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
47226 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47228 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
47229 Author: Jon Loeliger <jdl@freescale.com>
47230 Date: Sun Jul 8 15:02:44 2007 -0500
47232 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
47234 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47236 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
47237 Author: Jon Loeliger <jdl@freescale.com>
47238 Date: Sun Jul 8 15:12:40 2007 -0500
47240 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
47242 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47244 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
47245 Author: Jon Loeliger <jdl@freescale.com>
47246 Date: Sun Jul 8 14:55:07 2007 -0500
47248 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
47250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47252 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
47253 Author: Jon Loeliger <jdl@freescale.com>
47254 Date: Sun Jul 8 14:49:44 2007 -0500
47256 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
47258 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47260 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
47261 Author: Jon Loeliger <jdl@freescale.com>
47262 Date: Sun Jul 8 14:21:43 2007 -0500
47264 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
47266 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47268 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
47269 Author: Jon Loeliger <jdl@freescale.com>
47270 Date: Sun Jul 8 14:14:17 2007 -0500
47272 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
47274 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47276 commit 348f258f24253433e4a2302a0bbceb6740a67246
47277 Author: Jon Loeliger <jdl@freescale.com>
47278 Date: Sun Jul 8 13:46:18 2007 -0500
47280 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
47282 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47284 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
47285 Author: Jon Loeliger <jdl@freescale.com>
47286 Date: Sun Jul 8 10:09:35 2007 -0500
47288 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
47290 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47292 commit 60a0876b5106b34220e459c208bbf648073306c0
47293 Author: Jon Loeliger <jdl@freescale.com>
47294 Date: Sat Jul 7 21:04:26 2007 -0500
47296 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
47298 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47300 commit dcaa71562826a2466e894c868d132509dcda8444
47301 Author: Jon Loeliger <jdl@freescale.com>
47302 Date: Sat Jul 7 20:56:05 2007 -0500
47304 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
47306 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47308 commit 3c3227f3c737502311b25b72084573901cbbf17d
47309 Author: Jon Loeliger <jdl@freescale.com>
47310 Date: Sat Jul 7 20:40:43 2007 -0500
47312 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
47314 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47316 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
47317 Author: Jon Loeliger <jdl@freescale.com>
47318 Date: Thu Jul 5 19:52:35 2007 -0500
47320 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
47322 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47324 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
47325 Author: Jon Loeliger <jdl@freescale.com>
47326 Date: Thu Jul 5 19:32:07 2007 -0500
47328 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
47330 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47332 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
47333 Author: Jon Loeliger <jdl@freescale.com>
47334 Date: Thu Jul 5 19:13:52 2007 -0500
47336 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
47338 Since ADS860.h includes "board/fads/fads.h" with ramifications
47339 on the CONFIG_COMMAND treatment, it too has to be adjusted to
47340 exclude already configured commands in this same commit.
47342 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47344 commit 10e038932f22ee80ebd53de312531e70e6590a2f
47345 Author: Thomas Knobloch <knobloch@siemens.com>
47346 Date: Fri Jul 6 14:58:39 2007 +0200
47348 [NAND] Bad block skipping for command nboot
47350 The old implementation of command nboot does not support reading the image from
47351 NAND flash with skipping of bad blocks. The patch implements a new version of
47352 the nboot command: by calling nboot.jffs2 from the u-boot command line the
47353 command will load the image from NAND flash with respect to bad blocks (by using
47354 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
47357 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
47358 Signed-off-by: Stefan Roese <sr@denx.de>
47360 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
47361 Author: Stefan Roese <sr@denx.de>
47362 Date: Fri Jul 6 12:26:51 2007 +0200
47364 ppc4xx: Update lwmon5 default environment
47366 Signed-off-by: Stefan Roese <sr@denx.de>
47368 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
47369 Author: Stefan Roese <sr@denx.de>
47370 Date: Fri Jul 6 11:48:24 2007 +0200
47372 ppc4xx: Update lwmon5 board
47374 Add unlock=yes environment variable to default variables to unlock
47375 the CFI flash by default.
47377 Signed-off-by: Stefan Roese <sr@denx.de>
47379 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
47380 Author: Stefan Roese <sr@denx.de>
47381 Date: Fri Jul 6 09:45:47 2007 +0200
47383 Fix problem with get/setdcr commands introduced by cfg patches
47385 Signed-off-by: Stefan Roese <sr@denx.de>
47387 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
47388 Author: Wolfgang Denk <wd@denx.de>
47389 Date: Fri Jul 6 02:50:19 2007 +0200
47391 Code cleanup and default config update for STC GP3 SSA board.
47393 Signed-off-by: Wolfgang Denk <wd@denx.de>
47395 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
47396 Author: Wolfgang Denk <wd@denx.de>
47397 Date: Thu Jul 5 17:56:27 2007 +0200
47399 Fixing some typos etc. introduced mainly by cfg patches.
47401 Signed-off-by: Wolfgang Denk <wd@denx.de>
47403 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
47404 Author: Wolfgang Denk <wd@denx.de>
47405 Date: Thu Jul 5 11:12:16 2007 +0200
47407 Minor coding style cleanup. Update CHANGELOG.
47409 commit dca3b3d6d6396b67e5e84af53452164923c73443
47410 Author: Jon Loeliger <jdl@jdl.com>
47411 Date: Wed Jul 4 22:33:46 2007 -0500
47413 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
47415 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47417 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
47418 Author: Jon Loeliger <jdl@jdl.com>
47419 Date: Wed Jul 4 22:33:38 2007 -0500
47421 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
47423 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47425 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
47426 Author: Jon Loeliger <jdl@jdl.com>
47427 Date: Wed Jul 4 22:33:30 2007 -0500
47429 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
47431 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47433 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
47434 Author: Jon Loeliger <jdl@jdl.com>
47435 Date: Wed Jul 4 22:33:23 2007 -0500
47437 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
47439 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47441 commit 26a34560d56a9df5bc2ae23525d9229736134757
47442 Author: Jon Loeliger <jdl@jdl.com>
47443 Date: Wed Jul 4 22:33:17 2007 -0500
47445 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
47447 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47449 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
47450 Author: Jon Loeliger <jdl@jdl.com>
47451 Date: Wed Jul 4 22:33:13 2007 -0500
47453 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
47455 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47457 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
47458 Author: Jon Loeliger <jdl@jdl.com>
47459 Date: Wed Jul 4 22:33:07 2007 -0500
47461 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
47463 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47465 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
47466 Author: Jon Loeliger <jdl@jdl.com>
47467 Date: Wed Jul 4 22:33:01 2007 -0500
47469 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
47471 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47473 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
47474 Author: Jon Loeliger <jdl@jdl.com>
47475 Date: Wed Jul 4 22:32:57 2007 -0500
47477 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
47479 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47481 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
47482 Author: Jon Loeliger <jdl@jdl.com>
47483 Date: Wed Jul 4 22:32:51 2007 -0500
47485 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
47487 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47489 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
47490 Author: Jon Loeliger <jdl@jdl.com>
47491 Date: Wed Jul 4 22:32:32 2007 -0500
47493 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
47495 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47497 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
47498 Author: Jon Loeliger <jdl@jdl.com>
47499 Date: Wed Jul 4 22:32:25 2007 -0500
47501 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
47503 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47505 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
47506 Author: Jon Loeliger <jdl@jdl.com>
47507 Date: Wed Jul 4 22:32:19 2007 -0500
47509 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
47511 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47513 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
47514 Author: Jon Loeliger <jdl@jdl.com>
47515 Date: Wed Jul 4 22:32:10 2007 -0500
47517 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
47519 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47521 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
47522 Author: Jon Loeliger <jdl@jdl.com>
47523 Date: Wed Jul 4 22:32:03 2007 -0500
47525 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
47527 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47529 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
47530 Author: Jon Loeliger <jdl@jdl.com>
47531 Date: Wed Jul 4 22:31:56 2007 -0500
47533 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
47535 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47537 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
47538 Author: Jon Loeliger <jdl@jdl.com>
47539 Date: Wed Jul 4 22:31:49 2007 -0500
47541 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
47543 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47545 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
47546 Author: Jon Loeliger <jdl@jdl.com>
47547 Date: Wed Jul 4 22:31:42 2007 -0500
47549 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
47551 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47553 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
47554 Author: Jon Loeliger <jdl@jdl.com>
47555 Date: Wed Jul 4 22:31:35 2007 -0500
47557 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
47559 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47561 commit d794cfefead5fc177cf4f41164e80382e9c9484a
47562 Author: Jon Loeliger <jdl@jdl.com>
47563 Date: Wed Jul 4 22:31:15 2007 -0500
47565 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
47567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47569 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
47570 Author: Jon Loeliger <jdl@jdl.com>
47571 Date: Wed Jul 4 22:31:07 2007 -0500
47573 include/configs: Use new CONFIG_CMD_* in STx board config files.
47575 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47577 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
47578 Author: Jon Loeliger <jdl@jdl.com>
47579 Date: Wed Jul 4 22:30:58 2007 -0500
47581 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
47583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47585 commit 2694690e285acaa34922f55f4b5ae030da60c55a
47586 Author: Jon Loeliger <jdl@jdl.com>
47587 Date: Wed Jul 4 22:30:50 2007 -0500
47589 include/configs: Use new CONFIG_CMD_* in TQM board config files.
47591 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47593 commit 1cc4c458329765b58e584a19821e796b3c10e976
47594 Author: Jon Loeliger <jdl@jdl.com>
47595 Date: Wed Jul 4 22:30:28 2007 -0500
47597 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
47599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47601 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
47602 Author: Jon Loeliger <jdl@jdl.com>
47603 Date: Wed Jul 4 22:30:06 2007 -0500
47605 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
47607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47609 commit b44896215a09c60fa40cae906f7ed207bbc2c492
47610 Author: Sergei Poselenov <sposelenov@emcraft.com>
47611 Date: Thu Jul 5 08:17:37 2007 +0200
47613 Merged POST framework with the current TOT.
47615 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
47617 commit b24629fa377214d63bb40d1360e354b6d3e4af56
47618 Author: Jon Loeliger <jdl@jdl.com>
47619 Date: Wed Jun 13 13:23:15 2007 -0500
47621 mpc86xx: Remove old CFG_CMD_* references.
47623 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47625 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
47626 Author: Jon Loeliger <jdl@jdl.com>
47627 Date: Wed Jun 13 13:22:54 2007 -0500
47629 Add MPC8568MDS to MAKEALL 85xx target.
47631 It was missing from the original port submission.
47633 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47635 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
47636 Author: Jon Loeliger <jdl@jdl.com>
47637 Date: Wed Jun 13 13:22:08 2007 -0500
47639 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
47641 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47643 commit 56b304ac2091689506088a9ae67f63fd6300cf16
47644 Author: Jon Loeliger <jdl@jdl.com>
47645 Date: Wed Jun 13 13:21:37 2007 -0500
47647 Fix #if typo in CONFIG_CMD_* changes.
47649 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47651 commit f780b83316d9af1f61d71cc88b1917b387b9b995
47652 Author: Niklaus Giger <niklausgiger@gmx.ch>
47653 Date: Wed Jun 27 18:11:38 2007 +0200
47655 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
47657 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
47659 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
47660 Author: Stefan Roese <sr@denx.de>
47661 Date: Wed Jul 4 10:06:30 2007 +0200
47663 ppc4xx: Update lwmon5 board
47665 - Add optional ECC generation routine to preserve existing
47666 RAM values. This is needed for the Linux log-buffer support
47667 - Add optional DDR2 setup with CL=4
47668 - GPIO50 not used anymore
47669 - Lime register setup added
47671 Signed-off-by: Stefan Roese <sr@denx.de>
47673 commit 6810a34677dbc446334f5e451f1682426dd33b49
47674 Author: Grant Likely <grant.likely@secretlab.ca>
47675 Date: Tue Jul 3 00:17:28 2007 -0600
47677 Fix Makefile to use $(MKCONFIG) macro for all board ports
47679 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47681 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
47682 Author: Grant Likely <grant.likely@secretlab.ca>
47683 Date: Tue Jul 3 00:17:28 2007 -0600
47685 Fix Makefile to use $(MKCONFIG) macro for all board ports
47687 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47689 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
47690 Author: Grant Likely <grant.likely@secretlab.ca>
47691 Date: Tue Jul 3 00:34:49 2007 -0600
47693 Correct fixup relocation for mpc83xx
47695 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47697 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
47698 Author: Grant Likely <grant.likely@secretlab.ca>
47699 Date: Tue Jul 3 00:34:44 2007 -0600
47701 Correct fixup relocation for mpc8260
47703 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47705 commit f3a52fe05923935db86985daf9438e2f70ac39aa
47706 Author: Grant Likely <grant.likely@secretlab.ca>
47707 Date: Tue Jul 3 00:34:39 2007 -0600
47709 Correct fixup relocation for mpc824x
47711 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47713 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
47714 Author: Grant Likely <grant.likely@secretlab.ca>
47715 Date: Tue Jul 3 00:34:34 2007 -0600
47717 Correct fixup relocation for mpc8220
47719 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47721 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
47722 Author: Grant Likely <grant.likely@secretlab.ca>
47723 Date: Tue Jul 3 00:34:29 2007 -0600
47725 Correct fixup relocation for MPC5xxx
47727 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47729 commit 3649cd99ba815b6601868735765602f00ef3692b
47730 Author: Grant Likely <grant.likely@secretlab.ca>
47731 Date: Tue Jul 3 00:34:24 2007 -0600
47733 Correct relocation fixup for mpc5xx
47735 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47737 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
47738 Author: Grant Likely <grant.likely@secretlab.ca>
47739 Date: Tue Jul 3 00:34:19 2007 -0600
47741 Don't set gd->reloc_off if relocation of .fixup works correctly
47743 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47745 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
47746 Author: Grant Likely <grant.likely@secretlab.ca>
47747 Date: Tue Jul 3 00:34:14 2007 -0600
47749 Remove obsolete mpc83xx linker scripts
47751 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47753 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
47754 Author: Grant Likely <grant.likely@secretlab.ca>
47755 Date: Tue Jul 3 00:34:09 2007 -0600
47757 Consolidate mpc8260 linker scripts
47759 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47761 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
47762 Author: Grant Likely <grant.likely@secretlab.ca>
47763 Date: Tue Jul 3 00:34:04 2007 -0600
47765 Remove obsolete mpc824x linker scripts
47767 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47769 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
47770 Author: Grant Likely <grant.likely@secretlab.ca>
47771 Date: Tue Jul 3 00:33:59 2007 -0600
47773 Remove obsolete mpc824x linker scripts (3 of 4)
47775 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47777 commit a71c084f3ac7fedf144537db2b2da47323068833
47778 Author: Grant Likely <grant.likely@secretlab.ca>
47779 Date: Tue Jul 3 00:33:53 2007 -0600
47781 Remove obsolete mpc824x linker scripts (2 of 4)
47783 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47785 commit f670a15468d1365241d40022b9408e1004181f5e
47786 Author: Grant Likely <grant.likely@secretlab.ca>
47787 Date: Tue Jul 3 00:33:48 2007 -0600
47789 Remove obsolete mpc824x linker scripts (1 of 4)
47791 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47793 commit 09555bd45a04c0e54f172528d21bc18896550d28
47794 Author: Grant Likely <grant.likely@secretlab.ca>
47795 Date: Tue Jul 3 00:33:43 2007 -0600
47797 Remove obsolete mpc8220 linker scripts
47799 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47801 commit 5efb992f046e51225c93d52f80fecbe433abd789
47802 Author: Grant Likely <grant.likely@secretlab.ca>
47803 Date: Tue Jul 3 00:33:38 2007 -0600
47805 Remove obsolete mpc5xxx linker scripts (3 of 3)
47807 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47809 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
47810 Author: Grant Likely <grant.likely@secretlab.ca>
47811 Date: Tue Jul 3 00:33:33 2007 -0600
47813 Remove obsolete mpc5xxx linker scripts (2 of 3)
47815 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47817 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
47818 Author: Grant Likely <grant.likely@secretlab.ca>
47819 Date: Tue Jul 3 00:33:28 2007 -0600
47821 Remove obsolete mpc5xxx linker scripts (1 of 3)
47823 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47825 commit b7d8e05f8675249b5f208aa73babeed384a4519d
47826 Author: Grant Likely <grant.likely@secretlab.ca>
47827 Date: Tue Jul 3 00:33:23 2007 -0600
47829 Remove obsolete mpc5xx linker scripts
47831 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47833 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
47834 Author: Grant Likely <grant.likely@secretlab.ca>
47835 Date: Tue Jul 3 00:33:18 2007 -0600
47837 Consolidate mpc83xx linker scripts
47839 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47841 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
47842 Author: Grant Likely <grant.likely@secretlab.ca>
47843 Date: Tue Jul 3 00:33:13 2007 -0600
47845 Consolidate mpc8260 linker scripts
47847 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47849 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
47850 Author: Grant Likely <grant.likely@secretlab.ca>
47851 Date: Tue Jul 3 00:33:08 2007 -0600
47853 Consolidate mpc824x linker scripts
47855 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47857 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
47858 Author: Grant Likely <grant.likely@secretlab.ca>
47859 Date: Tue Jul 3 00:33:03 2007 -0600
47861 Consolidate mpc8220 linker scripts
47863 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47865 commit d181c9a15cd41863fe24840d17848429f27d3c8c
47866 Author: Grant Likely <grant.likely@secretlab.ca>
47867 Date: Tue Jul 3 00:32:58 2007 -0600
47869 Consolidate mpc5xxx linker scripts
47871 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47873 commit 287ac924adb7291bebe5086652a362a30ab28b13
47874 Author: Grant Likely <grant.likely@secretlab.ca>
47875 Date: Tue Jul 3 00:32:53 2007 -0600
47877 Consolidate mpc5xx linker scripts
47879 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47881 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
47882 Author: Wolfgang Denk <wd@denx.de>
47883 Date: Wed Jul 4 00:43:53 2007 +0200
47885 Fix a few file permission problems.
47887 Signed-off-by: Wolfgang Denk <wd@denx.de>
47889 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
47890 Author: Wolfgang Denk <wd@denx.de>
47891 Date: Wed Jul 4 00:38:38 2007 +0200
47893 Minor coding style cleanup. Rebuild CHANGELOG file.
47895 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
47896 Author: Jon Loeliger <jdl@jdl.com>
47897 Date: Mon Jun 11 19:03:44 2007 -0500
47899 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
47901 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47903 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
47904 Author: Jon Loeliger <jdl@jdl.com>
47905 Date: Mon Jun 11 19:03:39 2007 -0500
47907 README: Rewrite command line config to use CONFIG_CMD_* names.
47909 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47911 commit 72a074cec68e5bad60d63206c050974e08afd804
47912 Author: Jon Loeliger <jdl@jdl.com>
47913 Date: Mon Jun 11 19:03:34 2007 -0500
47915 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
47917 This is a compatibility step that allows both the older form
47918 and the new form to co-exist for a while until the older can
47919 be removed entirely.
47921 All transformations are of the form:
47923 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
47925 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
47927 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47929 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
47930 Author: Jon Loeliger <jdl@jdl.com>
47931 Date: Mon Jun 11 19:03:28 2007 -0500
47933 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
47935 This is a compatibility step that allows both the older form
47936 and the new form to co-exist for a while until the older can
47937 be removed entirely.
47939 All transformations are of the form:
47941 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
47943 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
47945 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47947 commit 9107ebe0d352420895ab69b715697bdebc8caf50
47948 Author: Jon Loeliger <jdl@jdl.com>
47949 Date: Mon Jun 11 19:03:23 2007 -0500
47951 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
47953 This is a compatibility step that allows both the older form
47954 and the new form to co-exist for a while until the older can
47955 be removed entirely.
47957 All transformations are of the form:
47959 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
47961 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
47963 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47965 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
47966 Author: Jon Loeliger <jdl@jdl.com>
47967 Date: Mon Jun 11 19:03:19 2007 -0500
47969 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
47971 This is a compatibility step that allows both the older form
47972 and the new form to co-exist for a while until the older can
47973 be removed entirely.
47975 All transformations are of the form:
47977 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
47979 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
47981 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47983 commit 737184114ec9c9e0ab94d6713536126073bd2472
47984 Author: Jon Loeliger <jdl@jdl.com>
47985 Date: Mon Jun 11 19:03:15 2007 -0500
47987 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
47989 This is a compatibility step that allows both the older form
47990 and the new form to co-exist for a while until the older can
47991 be removed entirely.
47993 All transformations are of the form:
47995 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
47997 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
47999 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48001 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
48002 Author: Jon Loeliger <jdl@jdl.com>
48003 Date: Mon Jun 11 19:03:08 2007 -0500
48005 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48007 This is a compatibility step that allows both the older form
48008 and the new form to co-exist for a while until the older can
48009 be removed entirely.
48011 All transformations are of the form:
48013 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48015 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48017 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48019 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
48020 Author: Jon Loeliger <jdl@jdl.com>
48021 Date: Mon Jun 11 19:03:03 2007 -0500
48023 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48025 This is a compatibility step that allows both the older form
48026 and the new form to co-exist for a while until the older can
48027 be removed entirely.
48029 All transformations are of the form:
48031 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48033 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48037 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
48038 Author: Jon Loeliger <jdl@jdl.com>
48039 Date: Mon Jun 11 19:02:58 2007 -0500
48041 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48043 This is a compatibility step that allows both the older form
48044 and the new form to co-exist for a while until the older can
48045 be removed entirely.
48047 All transformations are of the form:
48049 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48051 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48053 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48055 commit 98b79003c21c2578206003256de4e781d6b36ca8
48056 Author: Jon Loeliger <jdl@jdl.com>
48057 Date: Mon Jun 11 19:02:53 2007 -0500
48059 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48061 This is a compatibility step that allows both the older form
48062 and the new form to co-exist for a while until the older can
48063 be removed entirely.
48065 All transformations are of the form:
48067 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48069 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48071 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48073 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
48074 Author: Jon Loeliger <jdl@jdl.com>
48075 Date: Mon Jun 11 19:02:49 2007 -0500
48077 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48079 This is a compatibility step that allows both the older form
48080 and the new form to co-exist for a while until the older can
48081 be removed entirely.
48083 All transformations are of the form:
48085 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48087 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48089 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48091 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
48092 Author: Jon Loeliger <jdl@jdl.com>
48093 Date: Mon Jun 11 19:02:34 2007 -0500
48095 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48097 This is a compatibility step that allows both the older form
48098 and the new form to co-exist for a while until the older can
48099 be removed entirely.
48101 All transformations are of the form:
48103 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48105 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48107 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48109 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
48110 Author: Jon Loeliger <jdl@jdl.com>
48111 Date: Mon Jun 11 19:02:20 2007 -0500
48113 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48115 This is a compatibility step that allows both the older form
48116 and the new form to co-exist for a while until the older can
48117 be removed entirely.
48119 All transformations are of the form:
48121 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48123 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48125 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48127 commit d5be43de93ff905c465e509d45a3164ef48d26e7
48128 Author: Jon Loeliger <jdl@jdl.com>
48129 Date: Mon Jun 11 19:02:10 2007 -0500
48131 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48133 This is a compatibility step that allows both the older form
48134 and the new form to co-exist for a while until the older can
48135 be removed entirely.
48137 All transformations are of the form:
48139 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48141 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48143 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48145 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
48146 Author: Jon Loeliger <jdl@jdl.com>
48147 Date: Mon Jun 11 19:02:05 2007 -0500
48149 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48151 This is a compatibility step that allows both the older form
48152 and the new form to co-exist for a while until the older can
48153 be removed entirely.
48155 All transformations are of the form:
48157 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48159 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48161 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48163 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
48164 Author: Jon Loeliger <jdl@jdl.com>
48165 Date: Mon Jun 11 19:01:54 2007 -0500
48167 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48169 This is a compatibility step that allows both the older form
48170 and the new form to co-exist for a while until the older can
48171 be removed entirely.
48173 All transformations are of the form:
48175 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48177 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48181 commit a76adc8142c1d956385a109e0b70f9319ede4d66
48182 Author: Jon Loeliger <jdl@jdl.com>
48183 Date: Mon Jun 11 19:01:43 2007 -0500
48185 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
48187 This is a compatibility step that allows both the older form
48188 and the new form to co-exist for a while until the older can
48189 be removed entirely.
48191 All transformations are of the form:
48193 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
48195 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
48197 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48199 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
48200 Author: Jon Loeliger <jdl@jdl.com>
48201 Date: Mon Jun 11 19:01:34 2007 -0500
48203 Introduce initial versions of new Command Config files.
48205 Derive three new files from cmd_confdefs.h:
48206 config_bootp.h - Has BOOTP related config options, not commands
48207 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
48208 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
48210 For now, include "config_bootp.h" for compatability until all
48211 users of it directly include it properly.
48213 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48215 commit 1f2a05898658900dc5717761e27abf2052e67e13
48216 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
48217 Date: Sat Jun 30 18:50:48 2007 +0200
48221 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
48223 commit a5d71e290f3673269be8eefb4ec44f53412f9461
48224 Author: Heiko Schocher <hs@pollux.denx.de>
48225 Date: Mon Jun 25 19:11:37 2007 +0200
48227 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
48229 Signed-off-by: Heiko Schocher <hs@denx.de>
48231 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
48232 Author: Niklaus Giger <niklaus.giger@nestal.com>
48233 Date: Mon Jun 25 17:03:13 2007 +0200
48235 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
48237 This patch prints the DDR status registers upon machine check
48238 interrupt on the 440EPx/GRx. This can be useful especially when
48239 ECC support is enabled.
48241 I added some small changes to the original patch from Niklaus to
48242 make it compile clean.
48244 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
48245 Signed-off-by: Stefan Roese <sr@denx.de>
48247 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
48248 Author: Niklaus Giger <niklaus.giger@nestal.com>
48249 Date: Mon Jun 25 16:50:55 2007 +0200
48251 ppc4xx: Fix O=buildir builds
48253 This patch fixes the problem to assemble cpu/ppc4xx/start.S
48254 experienced last week where building failed having specified
48255 O=../build.sequoia.
48257 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
48259 commit 466fff1a7bb5fe764a06450626f6098219f446b8
48260 Author: Stefan Roese <sr@denx.de>
48261 Date: Mon Jun 25 15:57:39 2007 +0200
48263 ppc4xx: Add pci_pre_init() for 405 boards
48265 This patch removes the CFG_PCI_PRE_INIT option completely, since
48266 it's not needed anymore with the patch from Matthias Fuchs with
48267 the "weak" pci_pre_init() implementation.
48269 Signed-off-by: Stefan Roese <sr@denx.de>
48271 commit 6f35c53166213c24a5a0e2390ed861136ff73870
48272 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
48273 Date: Sun Jun 24 17:41:21 2007 +0200
48275 ppc4xx: Maintenance patch for esd's CPCI405 derivats
48277 -add pci_pre_init() for pci interrupt fixup code
48278 -disable phy sleep mode via reset_phy() function
48279 -use correct io accessors
48282 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
48284 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
48285 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
48286 Date: Sun Jun 24 17:23:41 2007 +0200
48288 ppc4xx: Add pci_pre_init() for 405 boards
48290 This patch adds support for calling a plattform dependant
48291 pci_pre_init() function for 405 boards. This can be used to
48292 move the current pci_405gp_fixup_irq() function into the
48295 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
48296 A default function with 'weak' attribute is used when
48297 a board specific pci_pre_init() is not implemented.
48299 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
48301 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
48302 Author: Wolfgang Denk <wd@denx.de>
48303 Date: Fri Jun 22 23:59:00 2007 +0200
48305 Coding stylke cleanup; rebuild CHANGELOG
48307 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
48308 Author: Igor Lisitsin <igor@emcraft.com>
48309 Date: Wed Apr 18 14:55:19 2007 +0400
48311 Adapt log buffer code to support Linux 2.6
48313 A new environment variable, "logversion", selects the log buffer
48314 behaviour. If it is not set or set to a value other than 2, then the
48315 old, Linux 2.4.4, behaviour is selected.
48317 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
48320 commit a11e06965ec91270c51853407ff1261d3c740386
48321 Author: Igor Lisitsin <igor@emcraft.com>
48322 Date: Wed Mar 28 19:06:19 2007 +0400
48324 Extend POST support for PPC440
48326 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
48328 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
48331 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
48332 Author: Heiko Schocher <hs@pollux.denx.de>
48333 Date: Fri Jun 22 19:11:54 2007 +0200
48335 [PCS440EP] upgrade the PCS440EP board:
48336 - Show on the Status LEDs, some States of the board.
48337 - Get the MAC addresses from the EEProm
48339 - use the CF on the board.
48340 - check the U-Boot image in the Flash with a SHA1
48342 - use dynamic TLB entries generation for the SDRAM
48344 Signed-off-by: Heiko Schocher <hs@denx.de>
48346 commit 3a1f5c81b0b9557817a789bece839905581c2205
48347 Author: Stefan Roese <sr@denx.de>
48348 Date: Fri Jun 22 16:58:40 2007 +0200
48350 ppc4xx: Fix problem with extended program_tlb() funtion
48352 The recently extended program_tlb() function had a problem when
48353 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
48354 virtual address was not incremented. This patch fixes this issue
48355 and is tested on Katmai with 512MB SDRAM.
48357 Signed-off-by: Stefan Roese <sr@denx.de>
48359 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
48360 Author: Rafal Jaworowski <raj@semihalf.com>
48361 Date: Fri Jun 22 14:58:04 2007 +0200
48363 [ppc] Fix build breakage for all non-4xx PowerPC variants.
48365 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
48366 - minor 4xx cleanup
48368 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
48369 Author: Mike Frysinger <vapier@gentoo.org>
48370 Date: Fri Jun 22 10:34:12 2007 +0200
48372 [patch] add nand_init() prototype to nand.h
48374 since nand_init() is expected to be called by other parts of u-boot, there
48375 should be a prototype for it in nand.h
48377 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
48378 Signed-off-by: Stefan Roese <sr@denx.de>
48380 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
48381 Author: Wolfgang Denk <wd@denx.de>
48382 Date: Wed Jun 20 18:14:24 2007 +0200
48384 Coding style cleanup. Refresh CHANGELOG.
48386 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
48387 Author: Stefan Roese <sr@denx.de>
48388 Date: Tue Jun 19 17:22:44 2007 +0200
48390 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
48392 This patch adds a board command to configure the I2C bootstrap EEPROM
48393 values. Right now 533 and 667MHz are supported for booting either via NOR
48394 or NAND FLASH. Here the usage:
48396 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
48397 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
48399 Signed-off-by: Stefan Roese <sr@denx.de>
48401 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
48402 Author: Stefan Roese <sr@denx.de>
48403 Date: Tue Jun 19 16:42:31 2007 +0200
48405 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
48407 The latest changes showed a problem with the location of the NAND-SPL
48408 image in the OCM and the init-data area (incl. cache). This patch
48409 fixes this problem.
48411 Signed-off-by: Stefan Roese <sr@denx.de>
48413 commit 86ba99e34194394052d24c04dc40d1263d29a26f
48414 Author: Stefan Roese <sr@denx.de>
48415 Date: Tue Jun 19 16:40:58 2007 +0200
48417 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
48419 Signed-off-by: Stefan Roese <sr@denx.de>
48421 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
48422 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
48423 Date: Mon Jun 18 13:50:13 2007 -0500
48425 Added M5329AFEE and M5329BFEE Platforms
48427 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
48428 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
48429 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
48432 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
48433 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
48434 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
48435 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
48436 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
48437 lib_m68k/time.c, net/eth.c and rtc/Makefile
48439 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
48441 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
48442 Author: Michal Simek <monstr@monstr.eu>
48443 Date: Sun Jun 17 19:04:11 2007 +0200
48445 [fix] email reparation
48447 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
48448 Author: Michal Simek <monstr@monstr.eu>
48449 Date: Sun Jun 17 19:03:21 2007 +0200
48451 [FIX] fix microblaze file permitission
48453 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
48454 Author: Stefan Roese <sr@denx.de>
48455 Date: Fri Jun 15 11:33:41 2007 +0200
48457 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
48459 Now CONFIG_440 has to be defined in all PPC440 board config files.
48461 Signed-off-by: Stefan Roese <sr@denx.de>
48463 commit efa35cf12d914d4caba942acd5a6c45f217de302
48464 Author: Grzegorz Bernacki <gjb@semihalf.com>
48465 Date: Fri Jun 15 11:19:28 2007 +0200
48467 ppc4xx: Clean up 440 exceptions handling
48469 - Introduced dedicated switches for building 440 and 405 images required
48470 for 440-specific machine instructions like 'rfmci' etc.
48472 - Exception vectors moved to the proper location (_start moved away from
48473 the critical exception handler space, which it occupied)
48475 - CriticalInput now serviced (with default handler)
48477 - MachineCheck properly serviced (added a dedicated handler and return
48480 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
48481 unhandled and those not relevant for 4xx were eliminated)
48483 - Eliminated Linux leftovers, removed dead code
48485 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48486 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
48487 Signed-off-by: Stefan Roese <sr@denx.de>
48489 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
48490 Author: Stefan Roese <sr@denx.de>
48491 Date: Fri Jun 15 08:18:01 2007 +0200
48493 [ppc4xx] Add initial lwmon5 board support
48495 This patch adds initial support for the Liebherr lwmon5 board euqipped
48496 with an AMCC 440EPx PowerPC.
48498 Signed-off-by: Stefan Roese <sr@denx.de>
48500 commit 85f737376d5ff3d5f0d45a8b657686326d175307
48501 Author: Stefan Roese <sr@denx.de>
48502 Date: Fri Jun 15 07:39:43 2007 +0200
48504 [ppc4xx] Extend 44x GPIO setup with default output state
48506 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
48507 is extended with the default GPIO output state (level).
48509 Signed-off-by: Stefan Roese <sr@denx.de>
48511 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
48512 Author: Stefan Roese <sr@denx.de>
48513 Date: Thu Jun 14 11:14:32 2007 +0200
48515 [ppc4xx] Extend program_tlb() with virtual & physical addresses
48517 Now program_tlb() allows to program a TLB (or multiple) with
48518 different virtual and physical addresses. With this change, now one
48519 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
48520 diabled and once with caches enabled.
48522 Signed-off-by: Stefan Roese <sr@denx.de>
48524 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
48525 Author: Detlev Zundel <dzu@denx.de>
48526 Date: Wed May 23 19:02:41 2007 +0200
48528 Change 'repeatable' attribute of some commands to sensible values.
48530 Most prominently this changes 'erase' to be non-repeatable.
48532 Signed-off-by: Detlev Zundel <dzu@denx.de>
48534 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
48535 Author: Detlev Zundel <dzu@denx.de>
48536 Date: Wed May 23 18:47:48 2007 +0200
48538 Fix 'run' not to continue after interrupted command
48540 Signed-off-by: Detlev Zundel <dzu@denx.de>
48542 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
48543 Author: Jason Jin <Jason.jin@freescale.com>
48544 Date: Mon Jun 11 15:14:24 2007 +0200
48546 USB: This patch fix readl in ohci swap reg access.
48548 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
48550 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
48551 Author: Bartlomiej Sieka <tur@semihalf.com>
48552 Date: Fri Jun 8 14:52:22 2007 +0200
48554 TQM5200: Add Flat Device Tree support, update default env. accordingly.
48556 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
48557 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48559 commit 9045f33c023f698660a2e45d1b2194c0711abebc
48560 Author: Wolfgang Denk <wd@denx.de>
48561 Date: Fri Jun 8 10:24:58 2007 +0200
48563 Fix config problems on SC3 board; make ide_reset_timeout work.
48565 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
48566 Author: Benoît Monin <bmonin@adeneo.eu>
48567 Date: Fri Jun 8 09:55:24 2007 +0200
48569 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
48571 Set the correct value in GPIOx_TCR when configuring the gpio
48572 with CFG_440_GPIO_TABLE.
48574 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
48575 Signed-off-by: Stefan Roese <sr@denx.de>
48577 commit f539edc076cfe52bff919dd512ba8d7af0e22092
48578 Author: Vadim Bendebury <vbendeb@google.com>
48579 Date: Thu May 24 15:52:25 2007 -0700
48581 cosmetic changes to bcm570x driver
48583 This is a cosmetic only changes submission.
48584 It affects files relevant to bcm570x driver.
48585 the commands used to generate this change was
48588 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
48590 The BMW target (the only one using this chip so far) builds cleanly, the
48591 `before and after' generated object files for drivers/bcm570x.c and
48592 drivers/tigon3.o are identical as reported by objdump -d
48594 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
48595 Signed-off-by: Ben Warren <bwarren@qstreams.com>
48597 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
48598 Author: Wolfgang Denk <wd@denx.de>
48599 Date: Wed Jun 6 16:26:56 2007 +0200
48601 Coding Style cleanup; generate new CHANGELOG file.
48603 Signed-off-by: Wolfgang Denk <wd@denx.de>
48605 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
48606 Author: Markus Klotzbuecher <mk@denx.de>
48607 Date: Wed Jun 6 11:49:44 2007 +0200
48609 TRAB, USB: update trab board configuration for use of generic ohci driver
48611 commit dace45acd1c1357daa9322099d07c9a9e08b0024
48612 Author: Markus Klotzbuecher <mk@denx.de>
48613 Date: Wed Jun 6 11:49:43 2007 +0200
48615 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
48617 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
48618 Author: Markus Klotzbuecher <mk@denx.de>
48619 Date: Wed Jun 6 11:49:43 2007 +0200
48621 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
48623 commit fc43be478f2aa37ce38acd85355038866e4162af
48624 Author: Markus Klotzbuecher <mk@denx.de>
48625 Date: Wed Jun 6 11:49:35 2007 +0200
48627 USB/OHCI: endianness cleanup in the generic ohci driver
48629 commit c440bfe6d6d92d66478a7e84402b31f48413617b
48630 Author: Stefan Roese <sr@denx.de>
48631 Date: Wed Jun 6 11:42:13 2007 +0200
48633 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
48635 This patch adds NAND booting support for the AMCC Acadia eval board.
48637 Please make sure to configure jumper J7 to position 2-3 when booting
48638 from NOR, and to position 1-2 when booting for NAND.
48640 I also added a board command to configure the I2C bootstrap EEPROM
48641 values. Right now only 267MHz is support for booting either via NOR
48642 or NAND FLASH. Here the usage:
48644 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
48645 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
48647 Signed-off-by: Stefan Roese <sr@denx.de>
48649 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
48650 Author: Rodolfo Giometti <giometti@linux.it>
48651 Date: Wed Jun 6 10:08:14 2007 +0200
48653 Files include/linux/byteorder/{big,little}_endian.h define
48654 __BIG_ENDIAN and __LITTLE_ENDIAN.
48656 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
48658 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
48659 Author: Zhang Wei <wei.zhang@freescale.com>
48660 Date: Wed Jun 6 10:08:14 2007 +0200
48662 Add USB PCI-OHCI, USB keyboard and event poll support to the
48663 MPC8641HPCN board config file.
48665 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
48667 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
48668 Author: Zhang Wei <wei.zhang@freescale.com>
48669 Date: Wed Jun 6 10:08:14 2007 +0200
48671 USB PCI-OHCI, interrupt pipe and usb event poll support
48673 This patch added USB PCI-OHCI chips support, interrupt pipe support
48674 and usb event poll support. For supporting the USB interrupt pipe, the
48675 globe urb_priv is moved to purb in ed struct. Now, we can process
48676 several urbs at one time. The interrupt pipe support codes are ported
48677 from Linux kernel 2.4.
48679 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
48681 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
48682 Author: Zhang Wei <wei.zhang@freescale.com>
48683 Date: Wed Jun 6 10:08:13 2007 +0200
48685 USB event poll support
48687 This patch adds USB event poll support, which could be used in usbkbd
48688 and other usb devices driver when the asynchronous interrupt
48689 processing is supported.
48691 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
48693 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
48694 Author: Rodolfo Giometti <giometti@linux.it>
48695 Date: Wed Jun 6 10:08:12 2007 +0200
48697 ISP116x: delay for crappy USB keys
48699 Using some (very) slow USB keys cause the USB host controller buffers
48700 are not ready to be read by the CPU so we need an extra delay before
48701 reading the USB storage data.
48703 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
48705 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
48706 Author: Markus Klotzbuecher <mk@denx.de>
48707 Date: Wed Jun 6 10:08:12 2007 +0200
48709 Change duplicate usb_cpu_init_fail to usb_board_init_fail
48711 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
48714 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
48716 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
48717 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48718 Date: Tue Jun 5 12:30:52 2007 -0500
48720 mpc8641 image size cleanup
48722 e600 does not have a bootpg restriction.
48723 Move the version string to beginning of image at fff00000.
48724 Resetvec.S is not needed.
48725 Update flash copy instructions.
48726 Add tftpflash env variable
48728 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48729 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48731 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
48732 Author: Benoît Monin <bmonin@adeneo.eu>
48733 Date: Mon Jun 4 08:36:05 2007 +0200
48735 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
48737 The attached patch is mainly cosmetic, allowing u-boot to
48738 display the correct bootstrap option letter according to the
48741 The original patch was extended with 405EZ support by Stefan
48744 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
48745 Signed-off-by: Stefan Roese <sr@denx.de>
48747 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
48748 Author: Nikita V. Youshchenko <yoush@debian.org>
48749 Date: Wed May 23 12:45:19 2007 +0400
48751 fix compilation problem for mpc8349itx CFG_RAMBOOT
48753 Current include/configs/MPC8349ITX.h does contain some support for building
48754 image that will be started from memory (without putting in into flash).
48755 It could be triggered by building with TEXT_BASE set to a low value.
48757 However, this support is incomplete: using of low TEXT_BASE causes
48758 defining configuration macros in inconsistent way, which later leads
48759 to compilation errors. In particular. flash support is being disabled,
48760 but then flash structures get referenced.
48762 This patch fixes this, making it possible to build with low TEXT_BASE.
48764 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
48766 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48768 commit 8a364f0970de49949d635e60accf463c6443ef8c
48769 Author: Nikita V. Youshchenko <yoush@debian.org>
48770 Date: Wed May 23 12:45:25 2007 +0400
48772 add missing 'console' var to default mpc8349itx config
48774 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48776 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
48777 Author: Stefan Roese <sr@denx.de>
48778 Date: Fri Jun 1 16:18:17 2007 +0200
48780 ppc4xx: Add missing file for Bamboo NAND booting support
48782 Signed-off-by: Stefan Roese <sr@denx.de>
48784 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
48785 Author: Stefan Roese <sr@denx.de>
48786 Date: Fri Jun 1 15:58:19 2007 +0200
48788 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
48790 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
48791 suggested by AMCC it is not recommended to dynamically change the EBC
48792 speed after bootup. So we undo this change to be on the safe side.
48794 Signed-off-by: Stefan Roese <sr@denx.de>
48796 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
48797 Author: Stefan Roese <sr@denx.de>
48798 Date: Fri Jun 1 15:29:04 2007 +0200
48800 ppc4xx: Update Sequoia NAND booting support with ECC
48802 Signed-off-by: Stefan Roese <sr@denx.de>
48804 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
48805 Author: Stefan Roese <sr@denx.de>
48806 Date: Fri Jun 1 15:27:11 2007 +0200
48808 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
48810 This patch adds NAND booting support for the AMCC Bamboo eval board.
48811 Since the NAND-SPL boot image is limited to 4kbytes, this version
48812 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
48813 supported, since the setup code for I2C DIMM autodetection and
48814 configuration is too big for this NAND bootloader.
48816 Signed-off-by: Stefan Roese <sr@denx.de>
48818 commit 42be56f53c8b107868e6125c8524ae84293e95a7
48819 Author: Stefan Roese <sr@denx.de>
48820 Date: Fri Jun 1 15:23:04 2007 +0200
48822 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
48824 The U-Boot NAND booting support is now extended to support ECC
48825 upon loading of the NAND U-Boot image.
48827 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
48829 Signed-off-by: Stefan Roese <sr@denx.de>
48831 commit a471db07fbb65a841ffc9f4f112562b945230f98
48832 Author: Stefan Roese <sr@denx.de>
48833 Date: Fri Jun 1 15:19:29 2007 +0200
48835 ppc4xx: Prepare Bamboo port for NAND booting support
48837 This patch updates the "normal" Bamboo NOR booting port, so
48838 that it is compatible with the coming soon NAND booting
48841 It also enables the 2nd NAND flash on the Bamboo.
48843 Signed-off-by: Stefan Roese <sr@denx.de>
48845 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
48846 Author: Stefan Roese <sr@denx.de>
48847 Date: Fri Jun 1 15:16:58 2007 +0200
48849 ppc4xx: Update in_be32() functions and friends to latest Linux version
48851 Signed-off-by: Stefan Roese <sr@denx.de>
48853 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
48854 Author: Stefan Roese <sr@denx.de>
48855 Date: Fri Jun 1 15:15:12 2007 +0200
48857 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
48859 This patch adds hardware ECC support to the NDFC driver. It also
48860 changes the register access from using the "simple" in32/out32
48861 functions to the in_be32/out_be32 functions, which make sure
48862 that the access is correctly synced. This is the only recommended
48863 access to SoC registers in the current Linux kernel.
48865 Signed-off-by: Stefan Roese <sr@denx.de>
48867 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
48868 Author: Stefan Roese <sr@denx.de>
48869 Date: Fri Jun 1 15:12:15 2007 +0200
48871 NAND: Update nand_ecc.c to latest Linux version
48873 This patch updates the nand_ecc code to the latest Linux version.
48874 The main reason for this is the more compact code. This makes
48875 it possible to include the ECC code into the NAND bootloader
48876 image (NAND_SPL) for PPC4xx.
48878 Signed-off-by: Stefan Roese <sr@denx.de>
48880 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
48881 Author: Stefan Roese <sr@denx.de>
48882 Date: Fri Jun 1 15:09:50 2007 +0200
48884 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
48886 Signed-off-by: Stefan Roese <sr@denx.de>
48888 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
48889 Author: Stefan Roese <sr@denx.de>
48890 Date: Fri Jun 1 13:45:24 2007 +0200
48892 ppc4xx: Change Luan config file to support ECC
48894 With the updated 44x DDR2 driver the Luan board now supports
48895 ECC generation and checking.
48897 Signed-off-by: Stefan Roese <sr@denx.de>
48899 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
48900 Author: Stefan Roese <sr@denx.de>
48901 Date: Fri Jun 1 13:45:00 2007 +0200
48903 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
48905 Add config option for 180 degree advance clock control as needed
48906 for the AMCC Luan eval board.
48908 Signed-off-by: Stefan Roese <sr@denx.de>
48910 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
48911 Author: Wolfgang Denk <wd@denx.de>
48912 Date: Thu May 31 17:20:09 2007 +0200
48914 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
48916 Signed-off-by: Wolfgang Denk <wd@denx.de>
48918 commit 7049288fb1f16f1b317140226cdebd07bd416395
48919 Author: Bartlomiej Sieka <tur@semihalf.com>
48920 Date: Sun May 27 17:26:46 2007 +0200
48922 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
48924 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
48926 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
48927 Author: Bartlomiej Sieka <tur@semihalf.com>
48928 Date: Sun May 27 17:06:36 2007 +0200
48930 Motion-PRO: Add support for redundant environment.
48932 Enable redundant environment, add a MTD partition for it; also add env.
48933 variable command for passing MTD partitions to the kernel command line.
48935 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
48936 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48938 commit a26eabeec31746f06d309103690892805696e344
48939 Author: Bartlomiej Sieka <tur@semihalf.com>
48940 Date: Sun May 27 17:05:11 2007 +0200
48942 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
48944 Allow passing longer command line to the kernel - useful especially
48945 for passing MTD partition layout.
48947 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
48948 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48950 commit 9160b96f71483a116de81c68985e8ee306d36764
48951 Author: Bartlomiej Sieka <tur@semihalf.com>
48952 Date: Sun May 27 17:04:18 2007 +0200
48954 Fix: Add missing NULL termination in strings expanded by macros parser.
48956 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
48957 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48959 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
48960 Author: Bartlomiej Sieka <tur@semihalf.com>
48961 Date: Sun May 27 17:03:37 2007 +0200
48963 Motion-PRO: Update EEPROM's page write bits and write delay.
48965 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
48966 have a page write capability of two bytes", and "This device offers fast (1ms)
48967 byte write". Add 3ms of extra delay.
48969 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
48970 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48972 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
48973 Author: Bartlomiej Sieka <tur@semihalf.com>
48974 Date: Sun May 27 16:58:45 2007 +0200
48976 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
48978 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
48979 networking does not function. This commit switches PHY to TX mode by clearing
48980 the FX_SEL bit of Mode Control Register. It also reverses commit
48981 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
48983 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48984 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48986 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
48987 Author: Bartlomiej Sieka <tur@semihalf.com>
48988 Date: Sun May 27 16:57:15 2007 +0200
48990 Motion-PRO: Add support for the temperature sensor.
48992 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
48993 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
48995 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
48996 Author: Bartlomiej Sieka <tur@semihalf.com>
48997 Date: Sun May 27 16:55:23 2007 +0200
48999 Motion-PRO: Add displaying of CPLD revision information during boot.
49001 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
49002 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
49004 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
49005 Author: Bartlomiej Sieka <tur@semihalf.com>
49006 Date: Sun May 27 16:53:43 2007 +0200
49008 MPC5xxx: Change names of defines related to IPB and PCI clocks.
49010 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
49011 them does not cause PCI or IPB clocks to run at the specified speed.
49012 Instead, they configure divisors used to calculate said clocks. This
49013 patch renames the defines according to their real function.
49015 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
49016 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
49018 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
49019 Author: Bartlomiej Sieka <tur@semihalf.com>
49020 Date: Sun May 27 16:51:48 2007 +0200
49022 Motion-PRO: Add LED support.
49024 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
49025 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
49026 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
49028 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
49029 Author: Ulf Samuelsson <ulf@atmel.com>
49030 Date: Thu May 24 12:12:47 2007 +0200
49032 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
49034 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
49035 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
49036 Signed-off-by: Stefan Roese <sr@denx.de>
49038 commit d756894722c888d09a9fa1df8323753772d3dcce
49039 Author: Stefan Roese <sr@denx.de>
49040 Date: Thu May 24 09:49:00 2007 +0200
49042 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
49044 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
49045 fixes a small bug in the 405EZ OCM initialization. Thanks for
49048 Signed-off-by: Stefan Roese <sr@denx.de>
49050 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
49051 Author: Stefan Roese <sr@denx.de>
49052 Date: Thu May 24 08:22:09 2007 +0200
49054 ppc4xx: Update AMCC Acadia support for board revision 1.1
49056 This patch updates the Acadia (405EZ) support for the new 1.1 board
49057 revision. It also adds support for NAND FLASH via the 4xx NDFC.
49059 Please note that the jumper J7 must be in position 2-3 for this
49060 NAND support. Position 1-2 is for NAND booting only. NAND booting
49061 support will follow later.
49063 Signed-off-by: Stefan Roese <sr@denx.de>
49065 commit 822d55365bb557e084d0e33625a6dedcc866110b
49066 Author: Jon Loeliger <jdl@freescale.com>
49067 Date: Wed May 23 14:09:46 2007 -0500
49069 Add LIST_86xx MAKEALL target for PowerPC builds.
49071 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49073 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
49074 Author: Stefan Roese <sr@denx.de>
49075 Date: Tue May 22 12:48:09 2007 +0200
49077 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
49079 Signed-off-by: Stefan Roese <sr@denx.de>
49081 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
49082 Author: Stefan Roese <sr@denx.de>
49083 Date: Tue May 22 12:46:10 2007 +0200
49085 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
49087 This patch adds support for 405 PPC's to the 4xx NAND driver
49088 ndfc.c. This is in preparation for the new AMCC 405EZ.
49090 Signed-off-by: Stefan Roese <sr@denx.de>
49092 commit 10603d76767426be803dadd4fb688b97eb69481c
49093 Author: Stefan Roese <sr@denx.de>
49094 Date: Mon May 21 07:41:22 2007 +0200
49096 ppc4xx: Fix problem in 405EZ OCM initialization
49098 As spotted by Bruce Adler this patch fixes an initialization problem
49101 Signed-off-by: Stefan Roese <sr@denx.de>
49103 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
49104 Author: Peter Pearse <peter.pearse@arm.com>
49105 Date: Fri May 18 16:47:03 2007 +0100
49107 Reduce line lengths to 80 characters max.
49109 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
49110 Author: Peter Pearse <peter.pearse@arm.com>
49111 Date: Fri May 18 14:34:07 2007 +0100
49113 Makefile permissions
49115 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
49116 Author: Peter Pearse <peter.pearse@arm.com>
49117 Date: Fri May 18 14:33:11 2007 +0100
49119 Makefile permissions
49121 commit 255a3577c848706441daee0174543efe205a77f8
49122 Author: Kim Phillips <kim.phillips@freescale.com>
49123 Date: Wed May 16 16:52:19 2007 -0500
49125 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
49127 For all practical u-boot purposes, TSECs don't differ throughout the
49128 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
49130 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49132 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
49133 Author: Stefano Babic <sbabic@denx.de>
49134 Date: Wed May 16 14:49:12 2007 +0200
49136 Fix compile problem cause my Microblaze merge
49138 Signed-off-by: Stefano Babic <sbabic@denx.de>
49140 commit ada4697d0230d6da552867777f98a67ec3ba2579
49141 Author: Jeffrey Mann <mannj@embeddedplanet.com>
49142 Date: Wed May 16 13:23:10 2007 +0200
49144 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
49146 Because the Sequoia board does not boot with an EBC faster than 66MHz,
49147 the clock divider are changed after the initial boot process.
49149 This allows for maximum clocking speeds to be achieved on newer boards.
49150 Sequoia boards with 666.66 MHz processors require that the EBC divider
49151 be set to 3 in order to start the initial boot process at a slower EBC
49152 speed. After the initial boot process, the divider can be set back to 2,
49153 which will cause the boards to run at 83.333MHz. This is backward
49154 compatible with boards with 533.33 MHz processors, as these boards will
49155 already be set with an EBC divider of 2.
49157 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
49159 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
49160 Author: Wolfgang Denk <wd@denx.de>
49161 Date: Wed May 16 01:16:53 2007 +0200
49163 Minor Coding Style cleanup, update CHANGELOG.
49165 Signed-off-by: Wolfgang Denk <wd@denx.de>
49167 commit d62f64cc23a940eafe712c776b3249e4160753d1
49168 Author: Wolfgang Denk <wd@denx.de>
49169 Date: Wed May 16 00:13:33 2007 +0200
49171 Coding Style Cleanup, new CHANGELOG
49173 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
49174 Author: Wolfgang Denk <wd@denx.de>
49175 Date: Tue May 15 23:38:05 2007 +0200
49177 Minor coding style cleanup.
49179 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
49180 Author: mushtaq khan <mushtaq_k@procsys.com>
49181 Date: Fri Apr 20 14:23:02 2007 +0530
49183 Add driver for S-ATA-controller on Intel processors with South
49184 Bridge, ICH-5, ICH-6 and ICH-7.
49188 1. Code is divided in to two files. All functions, which are
49189 controller specific are kept in "drivers/ata_piix.c" file and
49190 functions, which are not controller specific, are kept in
49191 "common/cmd_sata.c" file.
49193 2. Reading and Writing from the S-ATA drive is done using PIO method.
49195 3. Driver can be configured for 48-bit addressing by defining macro
49196 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
49199 4. S-ATA read function is hooked to the File system, commands like
49200 ext2ls and ext2load file can be used. This has been tested.
49202 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
49203 controller and identifies the S-ATA drives connected to it.
49205 6. U-Boot command "sata" is added, which is used to read/write, print
49206 partition table and get info about the drives present. This I have
49207 implemented in same way as "ide" command is implemented in U-Boot.
49209 7. This driver is for S-ATA in native mode.
49211 8. This driver does not support the Native command queuing and
49214 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
49216 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
49217 Author: mushtaq khan <mushtaq_k@procsys.com>
49218 Date: Mon Apr 30 15:57:22 2007 +0530
49220 Fixes bug clearing the bss section for i386
49223 There is a bug in the code of clearing the bss section for processor
49224 i386.(File: cpu/i386/start.S)
49225 In the code, bss_start addr (starting addr of bss section) is put into
49226 the register %eax, but the code which clears the bss section refers to
49227 the addr pointed by %edi.
49229 This patch fixes this bug by putting bss_start into %edi register.
49231 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
49233 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
49234 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
49235 Date: Mon Apr 30 16:47:28 2007 -0500
49237 Add support for BCM5464 Quad Phy
49239 Added support for Broadcom's BCM5464 Quad Phy
49241 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
49243 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
49244 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
49245 Date: Wed May 9 08:10:57 2007 +0800
49247 Search the exception table with linear algorithm
49249 Search the exception table with linear algorithm instead of
49250 bisecting algorithm.
49251 Because the exception table might be unsorted.
49253 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
49255 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
49256 Author: Aubrey.Li <aubrey.adi@gmail.com>
49257 Date: Mon May 14 11:47:35 2007 +0800
49259 Fix compilation issues on MACOSX
49261 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
49262 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
49264 commit 56fd7162985c412317bbf763a225fba23c64fd31
49265 Author: Stephen Williams <steve@icarus.com>
49266 Date: Tue May 15 07:55:42 2007 -0700
49268 Fix for compile of JSE target
49270 The attached patch fixes the compile of the JSE board in the
49271 denx git as of 14 may 2007. It is an extremely simple patch,
49272 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
49274 Fix to compile JSE against 20070514 git of u-boot
49276 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
49277 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
49278 Date: Sun May 13 21:01:03 2007 +0900
49280 sh: MS7750SE support.
49282 This adds support for the Hitachi MS7750SE.
49284 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
49286 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
49287 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
49288 Date: Sun May 13 20:58:00 2007 +0900
49290 sh: First support code of SuperH.
49292 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
49294 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
49295 Author: Stefan Roese <sr@denx.de>
49296 Date: Fri May 11 12:01:49 2007 +0200
49298 ppc4xx: Add mtcpr/mfcpr access macros
49300 Signed-off-by: Stefan Roese <sr@denx.de>
49302 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
49303 Author: Stefan Roese <sr@denx.de>
49304 Date: Fri May 11 12:01:06 2007 +0200
49306 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
49308 Signed-off-by: Stefan Roese <sr@denx.de>
49310 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
49311 Author: Piotr Kruszynski <ppk@semihalf.com>
49312 Date: Thu May 10 16:55:52 2007 +0200
49314 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
49317 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
49318 Author: Peter Pearse <peter.pearse@arm.com>
49319 Date: Wed May 9 11:42:44 2007 +0100
49321 Add the board directory for SMN42
49323 commit 160131bf965785419626df6c388729fe0b597992
49324 Author: Peter Pearse <peter.pearse@arm.com>
49325 Date: Wed May 9 11:41:58 2007 +0100
49327 Add the files for the SMN42 board
49329 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
49330 Author: Peter Pearse <peter.pearse@arm.com>
49331 Date: Wed May 9 11:40:34 2007 +0100
49333 Remove the deleted files for the SMN42 patch
49335 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
49336 Author: Peter Pearse <peter.pearse@arm.com>
49337 Date: Wed May 9 11:37:56 2007 +0100
49339 New board SMN42 branch
49341 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
49342 Author: Peter Pearse <peter.pearse@arm.com>
49343 Date: Wed May 9 10:24:38 2007 +0100
49345 Makefile permissions
49347 commit b84289b595731e8851df46e893845cc1322c9b9b
49348 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49349 Date: Tue May 8 14:17:07 2007 -0500
49351 8641hpcn: Fix Makefile after moving pixis to board/freescale.
49353 The OBJTREE != SRCTREE build scenario was broken.
49356 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49357 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49359 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
49360 Author: Michal Simek <monstr@monstr.eu>
49361 Date: Tue May 8 15:57:43 2007 +0200
49363 add: reading special purpose registers
49365 commit 1a50f164beb065f360fbddb76029607d6b099698
49366 Author: Michal Simek <monstr@monstr.eu>
49367 Date: Tue May 8 14:52:52 2007 +0200
49369 add: Microblaze V5 exception handling
49371 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
49372 Author: Michal Simek <monstr@monstr.eu>
49373 Date: Tue May 8 14:39:11 2007 +0200
49375 add: FSL control read and write
49377 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
49378 Author: Piotr Kruszynski <ppk@semihalf.com>
49379 Date: Tue May 8 13:05:44 2007 +0200
49381 [Motion-PRO] Add support for I2C, EEPROM and RTC.
49383 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
49384 Author: Bartlomiej Sieka <tur@semihalf.com>
49385 Date: Tue May 8 10:23:56 2007 +0200
49387 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
49390 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
49391 Author: Bartlomiej Sieka <tur@semihalf.com>
49392 Date: Tue May 8 09:39:12 2007 +0200
49394 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
49395 eliminates networking problems in Linux (timeouts).
49397 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
49398 Author: Bartlomiej Sieka <tur@semihalf.com>
49399 Date: Tue May 8 09:21:57 2007 +0200
49401 [Motion-PRO] Enable Flat Device Tree support and modify default environment
49402 to allow booting of FDT-expecting kernels.
49404 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
49405 Author: Michal Simek <monstr@monstr.eu>
49406 Date: Mon May 7 23:58:31 2007 +0200
49408 new: USE_MSR_INTR support
49410 commit 008861a2f3ef2c062744d733787c7e530a1b8761
49411 Author: Bartlomiej Sieka <tur@semihalf.com>
49412 Date: Mon May 7 22:36:15 2007 +0200
49414 [MPC5xxx] There are networking problems on the Motion-PRO board with
49415 current PHY initalization code (tftp timeouts all the time). This commit
49416 temporarily disables PHY initalization sequence to make the networking
49417 operational, until a fix is found.
49419 commit abca901869c3760b6c5fecb825db6c1d91a78a93
49420 Author: Wolfgang Denk <wd@denx.de>
49421 Date: Mon May 7 22:10:36 2007 +0200
49423 Get rid of duplicated file (see include/configs/sbc8560.h instead)
49425 Signed-off-by: Wolfgang Denk <wd@denx.de>
49427 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
49428 Author: Wolfgang Denk <wd@denx.de>
49429 Date: Mon May 7 22:07:08 2007 +0200
49431 Get rid of duplicated file (see doc/README.SBC8560 instead)
49433 Signed-off-by: Wolfgang Denk <wd@denx.de>
49435 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
49436 Author: Michal Simek <monstr@monstr.eu>
49437 Date: Mon May 7 19:43:10 2007 +0200
49439 fix: read and write MSR - repair number of parameters
49441 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
49442 Author: Jeffrey Mann <mannj@embeddedplanet.com>
49443 Date: Mon May 7 19:42:49 2007 +0200
49445 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
49447 A '3' got cut off in the formatting of the last patch to automatically
49448 change the clock speed of the system clock on sequoia board.
49450 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
49451 Signed-off-by: Stefan Roese <sr@denx.de>
49453 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
49454 Author: Michal Simek <monstr@monstr.eu>
49455 Date: Mon May 7 19:33:51 2007 +0200
49457 new: fsl interrupt support
49458 FSL_Has_data is connected to INTC.
49460 commit 792032baa7d625e34c981ab6df521911bd8dc861
49461 Author: Michal Simek <monstr@monstr.eu>
49462 Date: Mon May 7 19:30:12 2007 +0200
49464 fix: interrupt handler
49467 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
49468 Author: Michal Simek <monstr@monstr.eu>
49469 Date: Mon May 7 19:25:08 2007 +0200
49471 fix: remove asm code
49473 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
49474 Author: Michal Simek <monstr@monstr.eu>
49475 Date: Mon May 7 19:12:43 2007 +0200
49477 fix: clean interrupt
49479 commit 42efed6130c8fcf7da881385b5427065d2801757
49480 Author: Michal Simek <monstr@monstr.eu>
49481 Date: Mon May 7 17:22:25 2007 +0200
49483 fix: interrupt handler for multiple sources
49485 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
49486 Author: Michal Simek <monstr@monstr.eu>
49487 Date: Mon May 7 17:11:09 2007 +0200
49489 new: add writing to msr register
49491 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
49492 Author: Markus Klotzbuecher <mk@denx.de>
49493 Date: Mon May 7 16:43:56 2007 +0200
49495 Fix an ancient CHANGELOG conflict
49497 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
49498 Author: Timur Tabi <timur@freescale.com>
49499 Date: Sat May 5 08:12:30 2007 +0200
49501 5xxx: write MAC address to mac-address and local-mac-address
49503 Some device trees have a mac-address property, some have local-mac-address,
49504 and some have both. To support all of these device trees, ftp_cpu_setup()
49505 should write the MAC address to mac-address and local-mac-address, if they
49508 Signed-off-by: Timur Tabi <timur@freescale.com>
49509 Acked-by: Grant Likely <grant.likely@secretlab.ca>
49511 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
49512 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
49513 Date: Sun Apr 29 14:01:54 2007 +0200
49515 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
49517 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
49518 message. Use PVR to distinguish between the two variants, and print proper CPU
49521 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
49522 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
49523 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
49525 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
49526 Author: Ladislav Michl <ladis@linux-mips.org>
49527 Date: Wed Apr 25 16:01:26 2007 +0200
49529 [PATCH] simplify silent console
49531 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
49532 Acked-by: Stefan Roese <sr@denx.de>
49534 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
49535 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
49536 Date: Mon Apr 23 15:30:39 2007 +0200
49538 [PATCH] Avoid assigning PCI resources from zero address
49540 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
49541 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
49542 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
49543 sentence about "0" being considered an invalid address) -- so, use a reasonable
49544 starting value of 0x1000 (that's what the most Linux archs are using).
49546 Alternatively, one might have fixed the calls to pci_set_region() individually
49547 (some code even seems to have taken care of this issue) but that would have
49548 been a lot more work. :-)
49550 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
49551 Acked-by: Stefan Roese <sr@denx.de>
49553 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
49554 Author: Jeffrey Mann <mannj@embeddedplanet.com>
49555 Date: Mon Apr 23 14:00:11 2007 +0200
49557 [patch] setenv(...) can delete environmentalvariables
49559 update setenv() function so that entering a NULL value for the
49560 variable's value will delete the environmental variable
49562 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
49563 Acked-by: Stefan Roese <sr@denx.de>
49565 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
49566 Author: Mike Frysinger <vapier@gentoo.org>
49567 Date: Mon Apr 23 13:54:24 2007 +0200
49569 [patch] use unsigned char in smc91111 driver for mac
49571 the v_mac variable in the smc91111 driver is declared as a signed char ...
49572 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
49573 because when it gets printed out, you get a display like:
49574 0xFFFFFFE0 and that's no good
49576 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
49578 commit ffc50f9bb194343c6303517a517708457a5eb6b8
49579 Author: Michal Simek <monstr@monstr.eu>
49580 Date: Sat May 5 18:54:42 2007 +0200
49582 new: FSL and MSR support #2
49584 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
49585 Author: Michal Simek <monstr@monstr.eu>
49586 Date: Sat May 5 18:27:16 2007 +0200
49588 new: FSL and MSR support
49590 commit 2f15278c2eb911c668b4fe562130b78cf554d139
49591 Author: Wolfgang Denk <wd@denx.de>
49592 Date: Sat May 5 18:23:11 2007 +0200
49594 Coding stylke cleanup; update CHANGELOG.
49596 Signed-off-by: Wolfgang Denk <wd@denx.de>
49598 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
49599 Author: Wolfgang Denk <wd@denx.de>
49600 Date: Sat May 5 18:05:02 2007 +0200
49602 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
49604 Signed-off-by: Wolfgang Denk <wd@denx.de>
49606 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
49607 Author: Wolfgang Denk <wd@denx.de>
49608 Date: Sat May 5 17:15:50 2007 +0200
49610 Make "file" command happy with some config.mk files; update CHANGELOG
49612 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
49613 Author: Jeffrey Mann <mannj@embeddedplanet.com>
49614 Date: Sat May 5 08:32:14 2007 +0200
49616 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
49618 The AMCC Secquoia board has been changed in a new revision from using a
49619 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
49620 indicates the difference. This patch reads that bit and uses the correct
49621 clock speed for the board. This code is backward compatable will all
49622 prior boards. All prior boards will be read as 33.000.
49624 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
49625 Signed-off-by: Stefan Roese <sr@denx.de>
49627 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
49628 Author: Stefan Roese <sr@denx.de>
49629 Date: Sat May 5 08:29:01 2007 +0200
49631 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
49633 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
49634 for the 4k NAND boot image so define bus_frequency to 133MHz here
49635 which is save for the refresh counter setup.
49637 Signed-off-by: Stefan Roese <sr@denx.de>
49639 commit 2f550ab976405300f5b07bf2890800840d0aa05f
49640 Author: Timur Tabi <timur@freescale.com>
49641 Date: Sat May 5 08:12:30 2007 +0200
49643 5xxx: write MAC address to mac-address and local-mac-address
49645 Some device trees have a mac-address property, some have local-mac-address,
49646 and some have both. To support all of these device trees, ftp_cpu_setup()
49647 should write the MAC address to mac-address and local-mac-address, if they
49650 Signed-off-by: Timur Tabi <timur@freescale.com>
49651 Acked-by: Grant Likely <grant.likely@secretlab.ca>
49653 commit a79886590593ba1d667c840caa4940c61639f18f
49654 Author: Thomas Knobloch <knobloch@siemens.com>
49655 Date: Sat May 5 07:04:42 2007 +0200
49657 NAND: Wrong calculation of page number in nand_block_bad()
49659 In case that there is no memory based bad block table available the
49660 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
49661 nand_block_bad() directly. When parameter 'getchip' is set to zero,
49662 nand_block_bad() will not right shift the offset to calculate the
49663 correct page number.
49665 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
49666 Signed-off-by: Stefan Roese <sr@denx.de>
49668 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
49669 Author: Wolfgang Denk <wd@denx.de>
49670 Date: Fri May 4 10:02:33 2007 +0200
49672 Fix initrd length corruption in bootm command.
49674 When using FDT Images, the length of an inital ramdisk was
49675 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
49677 Patches by Timur Tabi & Johns Daniel.
49679 Signed-off-by: Wolfgang Denk <wd@denx.de>
49681 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
49682 Author: Kim Phillips <kim.phillips@freescale.com>
49683 Date: Thu May 3 19:43:52 2007 -0500
49685 mpc83xx: fix trivial error in MAKEALL
49687 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49689 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
49690 Author: Wolfgang Denk <wd@denx.de>
49691 Date: Thu May 3 16:34:41 2007 +0200
49693 Update board configuration for STX GP3SSA board:
49695 Enable hush shell, environment in flash rather in EEPROM,
49696 more user-friendly default environment, etc.
49697 The simple EEPROM environment can be selected easily in the board
49700 Signed-off-by: Wolfgang Denk <wd@denx.de>
49702 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
49703 Author: Wolfgang Denk <wd@denx.de>
49704 Date: Tue Apr 24 14:37:49 2007 +0200
49706 Cleanup STX GP3SSA code; fix build and compile problems.
49708 commit 35171dc04e028ecacc23ad916a66295472555dbf
49709 Author: Dan Malek <dan@embeddedalley.com>
49710 Date: Fri Jan 5 09:15:34 2007 +0100
49712 Add support for STX GP3SSA (stxssa) Board
49714 Signed-off-by Dan Malek, <dan@embeddedalley.com>
49716 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
49717 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49718 Date: Wed May 2 13:31:53 2007 +0200
49720 macb: Don't restart autonegotiation if we already have link
49722 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
49723 link is already up.
49725 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49727 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
49728 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49729 Date: Wed May 2 13:22:38 2007 +0200
49731 macb: Introduce a few barriers when dealing with DMA descriptors
49733 There were a few theoretical possibilities that the compiler might
49734 optimize away DMA descriptor reads and/or writes and thus cause
49735 synchronization problems with the hardware. Insert barriers where
49736 we depend on reads/writes actually hitting memory.
49738 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49740 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
49741 Author: Andy Fleming <afleming@freescale.com>
49742 Date: Sat Feb 24 01:08:13 2007 -0600
49744 Cleaned up some 85xx PCI bugs
49746 * Cleaned up the CDS PCI Config Tables and added NULL entries to
49748 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
49749 * Fixed 85xx PCI code to assign powar region sizes based on the
49750 config values (rather than hard-coding them)
49751 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
49753 Signed-off-by: Andy Fleming <afleming@freescale.com>
49755 commit 6743105988fc44d5b0d30388c790607835aae7a6
49756 Author: Andy Fleming <afleming@freescale.com>
49757 Date: Mon Apr 23 02:54:25 2007 -0500
49759 Add support for the 8568 MDS board
49761 This included some changes to common files:
49762 * Add 8568 processor SVR to various places
49763 * Add support for setting the qe bus-frequency value in the dts
49764 * Add the 8568MDS target to the Makefile
49766 Signed-off-by: Andy Fleming <afleming@freescale.com>
49768 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
49769 Author: David Updegraff <dave@cray.com>
49770 Date: Fri Apr 20 14:34:48 2007 -0500
49772 Add support for treating unknown PHYs as generic PHYs.
49774 When bringing up u-boot on new boards, PHY support sometimes gets
49775 neglected. Most PHYs don't really need any special support,
49776 though. By adding a generic entry that always matches if nothing
49777 else does, we can provide support for "unsupported" PHYs for the
49780 The generic PHY driver supports most PHYs, including gigabit.
49782 Signed-off-by: David Updegraff <dave@cray.com>
49783 Signed-off-by: Andy Fleming <afleming@freescale.com>
49785 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
49786 Author: James Yang <James.Yang@freescale.com>
49787 Date: Wed Feb 7 15:28:04 2007 -0600
49789 Conditionalize 8641 Rev1.0 MCM workarounds
49791 Signed-off-by: James Yang <James.Yang@freescale.com>
49792 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49794 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
49795 Author: Timur Tabi <timur@freescale.com>
49796 Date: Mon Apr 30 13:59:50 2007 -0500
49798 Fix memory initialization on MPC8349E-mITX
49800 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
49801 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
49802 on some ITX boards, notably those with a revision 3.1 CPU.
49804 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
49805 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
49807 Signed-off-by: Timur Tabi <timur@freescale.com>
49808 Acked-by: Michael Benedict <MBenedict@twacs.com>
49809 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49811 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
49812 Author: Kim Phillips <kim.phillips@freescale.com>
49813 Date: Mon Apr 30 15:26:21 2007 -0500
49815 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
49817 and fix CPU: to align with Board: display text.
49819 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49821 commit c1ab82669d9525998c34e802a12cad662723f22a
49822 Author: James Yang <James.Yang@freescale.com>
49823 Date: Fri Mar 16 13:02:53 2007 -0500
49825 Rewrote picos_to_clk() to avoid rounding errors.
49826 Clarified that conversion is to DRAM clocks rather than platform clocks.
49827 Made function static to spd_sdram.c.
49829 Signed-off-by: James Yang <James.Yang@freescale.com>
49830 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49832 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
49833 Author: Stefan Roese <sr@denx.de>
49834 Date: Sun Apr 29 14:13:01 2007 +0200
49836 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
49838 Signed-off-by: Stefan Roese <sr@denx.de>
49840 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
49841 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
49842 Date: Sun Apr 29 14:01:54 2007 +0200
49844 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
49846 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
49847 message. Use PVR to distinguish between the two variants, and print proper CPU
49850 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
49851 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
49852 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
49854 commit 5c5d3242935cf3543af01142627494434834cf98
49855 Author: Kim Phillips <kim.phillips@freescale.com>
49856 Date: Wed Apr 25 12:34:38 2007 -0500
49858 mpc83xx: minor fixups for 8313rdb introduction
49860 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
49861 Author: Ladislav Michl <ladis@linux-mips.org>
49862 Date: Wed Apr 25 16:01:26 2007 +0200
49864 [PATCH] simplify silent console
49866 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
49867 Acked-by: Stefan Roese <sr@denx.de>
49869 commit 144876a380f5756f57412caf74c1d6dc201dd796
49870 Author: Michal Simek <monstr@monstr.eu>
49871 Date: Tue Apr 24 23:01:02 2007 +0200
49873 [PATCH] MTD partition support, JFFS2 support
49875 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
49876 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
49877 Date: Tue Apr 24 14:03:45 2007 +0200
49879 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
49881 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
49883 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
49884 Author: Andy Fleming <afleming@freescale.com>
49885 Date: Mon Apr 23 02:37:47 2007 -0500
49887 Reworked 85xx speed detection code
49889 Changed the code to read the registers and calculate the clock
49890 rates, rather than using a "switch" statement.
49892 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
49894 Signed-off-by: Andy Fleming <afleming@freescale.com>
49896 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
49897 Author: Andy Fleming <afleming@freescale.com>
49898 Date: Mon Apr 23 02:24:28 2007 -0500
49900 Enable 8544 support
49902 * Add support to the Makefile
49903 * Add 8544 configuration support to the tsec driver
49904 * Add 8544 SVR numbers to processor.h
49906 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49907 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49909 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
49910 Author: Andy Fleming <afleming@freescale.com>
49911 Date: Fri Feb 23 17:12:25 2007 -0600
49913 Support 1G size on 8548
49915 e500v2 and newer cores support 1G page sizes.
49917 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49918 Signed-off-by: Andy Fleming <afleming@freescale.com>
49920 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
49921 Author: Andy Fleming <afleming@freescale.com>
49922 Date: Fri Feb 23 17:11:16 2007 -0600
49924 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
49926 The other pagesz constants use one letter to specify order of
49927 magnitude. Also change the one reference to it in mpc8548cds/init.S
49929 Signed-off-by: Andy Fleming <afleming@freescale.com>
49931 commit 1f9a318cea14272edd10d63739e2d326c90f430e
49932 Author: Andy Fleming <afleming@freescale.com>
49933 Date: Fri Feb 23 16:28:46 2007 -0600
49935 Only set ddrioovcr for 8548 rev1.
49937 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49938 Signed-off-by: Andy Fleming <afleming@freescale.com>
49940 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
49941 Author: Andy Fleming <afleming@freescale.com>
49942 Date: Sat Feb 24 01:16:45 2007 -0600
49944 Tweak DDR ECC error counter
49946 Enable single-bit error counter when memory was cleared by ddr controller.
49948 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49949 Signed-off-by: Andy Fleming <afleming@freescale.com>
49951 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
49952 Author: Timur Tabi <timur@freescale.com>
49953 Date: Mon Feb 12 13:34:55 2007 -0600
49955 85xx: write MAC address to mac-address and local-mac-address
49957 Some device trees have a mac-address property, some have local-mac-address,
49958 and some have both. To support all of these device trees, ftp_cpu_setup()
49959 should write the MAC address to mac-address and local-mac-address, if they
49962 Signed-off-by: Timur Tabi <timur@freescale.com>
49964 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
49965 Author: Andy Fleming <afleming@freescale.com>
49966 Date: Mon Apr 23 01:44:44 2007 -0500
49968 Some 85xx cpu cleanups
49970 * Cleaned up the TSR[WIS] clearing
49971 * Cleaned up DMA initialization
49973 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49974 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49975 Acked-by: Andy Fleming <afleming@freescale.com>
49977 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
49978 Author: Andy Fleming <afleming@freescale.com>
49979 Date: Mon Apr 23 01:32:22 2007 -0500
49981 Add cpu support for the 8544
49983 Recognize new SVR values, and add a few register definitions
49985 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49986 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49987 Acked-by: Andy Fleming <afleming@freescale.com>
49989 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
49990 Author: Jon Loeliger <jdl@freescale.com>
49991 Date: Wed Apr 11 16:51:02 2007 -0500
49993 Add MPC8544DS basic port board files.
49995 Add board port under new board/freescale directory
49996 structure and reuse existing PIXIS FPGA support there.
49998 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49999 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50001 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
50002 Author: Jon Loeliger <jdl@freescale.com>
50003 Date: Wed Apr 11 16:50:57 2007 -0500
50005 Add MPC8544DS main configuration file.
50007 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50008 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50010 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
50011 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
50012 Date: Wed Dec 27 22:07:15 2006 +0300
50014 Fix PCI I/O space mapping on Freescale MPC85x0ADS
50016 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
50017 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
50018 describing the local address window used for the PCI I/O space accesses -- fix
50019 this and carry over the necessary changes into the MPC8560ADS code since the
50020 PCI I/O space mapping was also broken for this board (by the earlier commit
50021 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
50022 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
50024 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
50026 board/mpc8540ads/init.S | 4 ++--
50027 board/mpc8560ads/init.S | 4 ++--
50028 include/configs/MPC8540ADS.h | 5 ++---
50029 include/configs/MPC8541CDS.h | 2 +-
50030 include/configs/MPC8548CDS.h | 2 +-
50031 include/configs/MPC8560ADS.h | 8 ++++----
50032 6 files changed, 12 insertions(+), 13 deletions(-)
50034 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
50035 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
50036 Date: Tue Dec 5 16:42:30 2006 +0800
50038 u-boot: Fix e500 v2 core reset bug
50040 The following patch fixes the e500 v2 core reset bug.
50041 For e500 v2 core, a new reset control register is added to reset the
50044 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
50046 commit 63247a5acd58032e6cf33f525bc3923b467bac88
50047 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
50048 Date: Wed Dec 20 11:01:00 2006 +0800
50050 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
50052 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
50053 entry number to control the loop. This can reduce the potential risk
50054 for the 85xx processor increasing its TLB adn LAW entry number.
50056 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
50057 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
50059 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
50060 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
50061 Date: Mon Dec 18 17:01:04 2006 +0800
50063 u-boot: Fix the 85xxcds tsec bug
50065 Fix the 85xxcds tsec bug.
50066 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
50068 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
50070 commit 7337b237ffc4aaf1b9467024fe472a880d852598
50071 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
50072 Date: Fri Dec 15 14:43:31 2006 +0800
50074 u-boot: Fix CPU2 errata on MPC8548CDS board
50076 This patch apply workaround of CPU2 errata on MPC8548CDS board.
50078 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
50080 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
50081 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
50082 Date: Mon Dec 18 16:25:15 2006 +0800
50084 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
50086 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
50088 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
50090 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
50091 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
50092 Date: Thu Dec 14 14:14:55 2006 +0800
50094 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
50096 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
50098 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
50100 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
50101 Author: Scott Wood <scottwood@freescale.com>
50102 Date: Mon Apr 16 14:54:15 2007 -0500
50104 mpc83xx: Add MPC8313ERDB support.
50106 Signed-off-by: Scott Wood <scottwood@freescale.com>
50108 commit 49ea3b6eafe606285ae4d5c378026153dde53200
50109 Author: Scott Wood <scottwood@freescale.com>
50110 Date: Mon Apr 16 14:34:21 2007 -0500
50112 mpc83xx: Add generic PCI setup code.
50114 Board code can now request the generic setup code rather than having to
50115 copy-and-paste it for themselves. Boards should be converted to use this
50116 once they're tested with it.
50118 Signed-off-by: Scott Wood <scottwood@freescale.com>
50120 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
50121 Author: Scott Wood <scottwood@freescale.com>
50122 Date: Mon Apr 16 14:34:19 2007 -0500
50124 mpc83xx: Add 831x support to speed.c.
50126 Signed-off-by: Scott Wood <scottwood@freescale.com>
50128 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
50129 Author: Scott Wood <scottwood@freescale.com>
50130 Date: Mon Apr 16 14:34:18 2007 -0500
50132 mpc83xx: Add 831x support to global_data.h
50134 Signed-off-by: Scott Wood <scottwood@freescale.com>
50136 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
50137 Author: Scott Wood <scottwood@freescale.com>
50138 Date: Mon Apr 16 14:34:16 2007 -0500
50140 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
50142 Rather than misleadingly define PVR_83xx as the specific type of 83xx
50143 being built for, the PVR of each core revision is defined. checkcpu() now
50144 prints the core that it detects, rather than aborting if it doesn't find
50145 what it thinks it wants.
50147 Signed-off-by: Scott Wood <scottwood@freescale.com>
50149 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
50150 Author: Scott Wood <scottwood@freescale.com>
50151 Date: Mon Apr 16 14:34:15 2007 -0500
50153 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
50155 Signed-off-by: Scott Wood <scottwood@freescale.com>
50157 commit d87c57b201b4572d16f1b642998faa00c9912b16
50158 Author: Scott Wood <scottwood@freescale.com>
50159 Date: Mon Apr 16 14:31:55 2007 -0500
50161 mpc83xx: Add register definitions for MPC831x.
50163 Signed-off-by: Scott Wood <scottwood@freescale.com>
50165 commit 7fc4c71a143be8666d70803fb25ae60379c95622
50166 Author: Stefan Roese <sr@denx.de>
50167 Date: Mon Apr 23 15:39:59 2007 +0200
50171 Signed-off-by: Stefan Roese <sr@denx.de>
50173 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
50174 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
50175 Date: Mon Apr 23 15:30:39 2007 +0200
50177 [PATCH] Avoid assigning PCI resources from zero address
50179 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
50180 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
50181 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
50182 sentence about "0" being considered an invalid address) -- so, use a reasonable
50183 starting value of 0x1000 (that's what the most Linux archs are using).
50185 Alternatively, one might have fixed the calls to pci_set_region() individually
50186 (some code even seems to have taken care of this issue) but that would have
50187 been a lot more work. :-)
50189 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
50190 Acked-by: Stefan Roese <sr@denx.de>
50192 commit afb903a2eb9436baa9270ccc0c27082d86497d89
50193 Author: Jeffrey Mann <mannj@embeddedplanet.com>
50194 Date: Mon Apr 23 14:00:11 2007 +0200
50196 [patch] setenv(...) can delete environmentalvariables
50198 update setenv() function so that entering a NULL value for the
50199 variable's value will delete the environmental variable
50201 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
50202 Acked-by: Stefan Roese <sr@denx.de>
50204 commit 36f104e5caa747d568eff26b369565af57c2ffa6
50205 Author: Mike Frysinger <vapier@gentoo.org>
50206 Date: Mon Apr 23 13:54:24 2007 +0200
50208 [patch] use unsigned char in smc91111 driver for mac
50210 the v_mac variable in the smc91111 driver is declared as a signed char ...
50211 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
50212 because when it gets printed out, you get a display like:
50213 0xFFFFFFE0 and that's no good
50215 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
50217 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
50218 Author: Rodolfo Giometti <giometti@enneenne.com>
50219 Date: Mon Apr 23 13:10:52 2007 +0200
50221 USB: (Another) delay for crappy USB keys.
50223 Some USB keys are slow in giving back an answer when the Root HUB
50224 enables power lines.
50226 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
50228 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
50229 Author: Stefan Roese <sr@denx.de>
50230 Date: Mon Apr 23 12:00:22 2007 +0200
50232 Remove BOARDLIBS usage completely
50234 Signed-off-by: Stefan Roese <sr@denx.de>
50236 commit 32556443840f127170e4baa8bdd5b567039f6c36
50237 Author: Michal Simek <monstr@monstr.eu>
50238 Date: Sat Apr 21 21:07:22 2007 +0200
50240 [PATCH] SystemACE support for Microblaze
50242 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
50243 Author: Michal Simek <monstr@monstr.eu>
50244 Date: Sat Apr 21 21:02:40 2007 +0200
50246 16bit read/write little endian
50248 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
50249 Author: Michal Simek <monstr@monstr.eu>
50250 Date: Sat Apr 21 20:53:31 2007 +0200
50252 Change ML401 parameters - Xilinx BSP
50254 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
50255 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50256 Date: Wed Feb 28 05:37:29 2007 -0600
50258 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
50260 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50262 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
50263 Author: Zhang Wei <wei.zhang@freescale.com>
50264 Date: Fri Jan 19 10:42:37 2007 +0800
50266 Enable LAWs for MPC8641 PCI-Ex2.
50268 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
50269 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50271 commit bd7851ce1e1f140665b520026abf1042968b1102
50272 Author: Jon Loeliger <jdl@freescale.com>
50273 Date: Fri Apr 20 14:12:26 2007 -0500
50275 mpc86xx; Write MAC address to mac-address and local-mac-address
50277 Some device trees have a mac-address property, some have local-mac-address,
50278 and some have both. To support all of these device trees, ftp_cpu_setup()
50279 should write the MAC address to mac-address and local-mac-address, if they
50282 Signed-off-by: Timur Tabi <timur@freescale.com>
50283 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50285 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
50286 Author: Jon Loeliger <jdl@freescale.com>
50287 Date: Fri Apr 20 14:11:38 2007 -0500
50289 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
50291 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50292 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50294 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
50295 Author: Wolfgang Denk <wd@denx.de>
50296 Date: Fri Apr 20 17:43:28 2007 +0200
50298 Cleanup compiler warnings, update CHANGELOG
50300 Signed-off-by: Wolfgang Denk <wd@denx.de>
50302 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
50303 Author: Detlev Zundel <dzu@denx.de>
50304 Date: Fri Apr 20 12:01:47 2007 +0200
50306 Fix breakage of NC650 board with respect to nand support.
50308 Signed-off-by: Detlev Zundel <dzu@denx.de>
50310 commit 39f23cd90947639ac278a18ff277ec786b5ac167
50311 Author: Domen Puncer <domen.puncer@telargo.com>
50312 Date: Fri Apr 20 11:13:16 2007 +0200
50314 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
50316 G2 core reference manual says decrementer and time base
50317 are decreasing/increasing once every 4 bus clock cycles.
50318 Lets fix it, so time in Linux won't run twice as fast
50320 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
50321 Acked-by: Grant Likely <grant.likely@secretlab.ca>
50323 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
50324 Author: Gerald Van Baren <vanbaren@cideas.com>
50325 Date: Thu Apr 19 23:14:39 2007 -0400
50327 Fix serious pointer bug with bootm and reserve map.
50329 What was suppose to be a stack variable was declared as a pointer,
50330 overwriting random memory.
50331 Also moved the libfdt.a requirement into the main Makefile. That is
50334 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
50335 Author: Stefan Roese <sr@denx.de>
50336 Date: Thu Apr 19 09:53:52 2007 +0200
50338 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
50340 Previous versions used full wait states for the chip select #1 which
50341 is connected to the Xilinix SystemACE controller on the AMCC Katmai
50342 evaluation board. This leads to really slow access and therefore low
50343 performance. This patch now sets up the chip select a lot faster
50344 resulting in much better read/write performance of the Linux driver.
50346 Signed-off-by: Stefan Roese <sr@denx.de>
50348 commit 37837828d89084879bee2f2b8c7c68d4695940df
50349 Author: Wolfgang Denk <wd@denx.de>
50350 Date: Wed Apr 18 17:49:29 2007 +0200
50352 Clenaup, update CHANGELOG
50354 Signed-off-by: Wolfgang Denk <wd@denx.de>
50356 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
50357 Author: Wolfgang Denk <wd@denx.de>
50358 Date: Wed Apr 18 17:20:58 2007 +0200
50362 Signed-off-by: Wolfgang Denk <wd@denx.de>
50364 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
50365 Author: Wolfgang Denk <wd@denx.de>
50366 Date: Wed Apr 18 17:07:26 2007 +0200
50368 Cleanup, update CHANGELOG
50370 Sigend-off-by: Wolfgang Denk <wd@denx.de>
50372 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
50373 Author: Wolfgang Denk <wd@denx.de>
50374 Date: Wed Apr 18 16:17:46 2007 +0200
50378 commit ad4eb555671d97f96dc56eab55103b1f86874b01
50379 Author: Wolfgang Denk <wd@denx.de>
50380 Date: Wed Apr 18 14:30:39 2007 +0200
50382 MCC200 board: remove warning which is obsolete after PSoC firmware changes
50384 Signed-off-by: Wolfgang Denk <wd@denx.de>
50386 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
50387 Author: Domen Puncer <domen.puncer@telargo.com>
50388 Date: Wed Apr 18 12:11:05 2007 +0200
50390 [PATCH] icecube/lite5200b: document wakeup from low-power support
50392 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
50394 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
50395 Author: Stefan Roese <sr@denx.de>
50396 Date: Wed Apr 18 12:07:47 2007 +0200
50398 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
50400 Signed-off-by: Stefan Roese <sr@denx.de>
50402 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
50403 Author: Stefan Roese <sr@denx.de>
50404 Date: Wed Apr 18 12:05:59 2007 +0200
50406 ppc4xx: Add output for bootrom location to 405EZ ports
50408 Now 405EZ ports also show upon bootup from which boot device
50409 they are configured to boot:
50411 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
50413 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
50414 Bootstrap Option E - Boot ROM Location EBC (32 bits)
50415 16 kB I-Cache 16 kB D-Cache
50416 Board: Acadia - AMCC PPC405EZ Evaluation Board
50418 Signed-off-by: Stefan Roese <sr@denx.de>
50420 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
50421 Author: Peter Pearse <peter.pearse@arm.com>
50422 Date: Tue Apr 17 13:30:33 2007 +0100
50424 Move ppearse to ARM board list
50425 Add Konstantin Kletschke for scb9328.
50426 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
50428 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
50429 Author: Domen Puncer <domen.puncer@telargo.com>
50430 Date: Mon Apr 16 14:00:13 2007 +0200
50432 [PATCH] icecube/lite5200b: wakeup from low-power support
50434 U-Boot part of Lite5200b low power mode support.
50435 Puts SDRAM out of self-refresh and transfers control to
50436 address saved at physical 0x0.
50438 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
50439 Acked-by: Grant Likely <grant.likely@secretlab.ca>
50441 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
50442 Author: Gerald Van Baren <vanbaren@cideas.com>
50443 Date: Sun Apr 15 13:54:26 2007 -0400
50445 Fix the ft_cpu_setup() property settings.
50447 Use "setter" functions instead of flags, cleaner and more flexible.
50448 It also fixes the problem noted by Timur Tabi that the ethernet MAC
50449 addresses were all being set incorrectly to the same MAC address.
50451 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
50452 Author: Gerald Van Baren <vanbaren@cideas.com>
50453 Date: Sat Apr 14 22:51:24 2007 -0400
50455 Improve the bootm command for CONFIG_OF_LIBFDT
50457 In bootm, create the "/chosen" node only if it doesn't already exist
50458 (better matches the previous behavior).
50459 Update for proper reserved memory map handling for initrd.
50461 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
50462 Author: Gerald Van Baren <vanbaren@cideas.com>
50463 Date: Sat Apr 14 22:46:41 2007 -0400
50465 Add some utilities to manipulate the reserved memory map.
50467 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
50468 Author: Wolfgang Denk <wd@denx.de>
50469 Date: Sat Apr 14 21:16:54 2007 +0200
50473 commit 8e6875183cdca91c134408d119d4abcd48ef6856
50474 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50475 Date: Sun Dec 17 18:56:46 2006 +0100
50477 AVR32: Enable MMC support
50479 Set up the portmux for the MMC interface and enable the MMC driver
50480 along with support for DOS partitions, ext2 and FAT filesystems.
50482 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50484 commit fc26c97bb6df41b4a95662c34054fe912387bf38
50485 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50486 Date: Fri Jan 20 10:03:53 2006 +0100
50490 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
50492 The AT91 ARM-based CPUs use basically the same hardware, so it should
50493 be possible to share this driver, but no effort has been made so far.
50495 Hardware documentation can be found in the AT32AP7000 data sheet,
50496 which can be downloaded from
50498 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
50500 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50502 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
50503 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50504 Date: Sun Dec 17 18:55:37 2006 +0100
50506 AVR32: Add clk and gpio infrastructure for mmci
50508 Implement functions for configuring the mmci pins, as well as
50509 functions for getting the clock rate of the mmci controller.
50511 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50513 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
50514 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50515 Date: Sun Dec 17 18:53:56 2006 +0100
50517 Enable partition support with MMC
50519 Include implementations of init_part() and get_partition_info() when
50522 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50524 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
50525 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50526 Date: Sun Dec 17 17:14:30 2006 +0100
50528 AVR32: Enable networking
50530 Implement MACB initialization for AVR32 and ATSTK1000, and turn
50531 everything on, including the MACB driver.
50533 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50535 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
50536 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50537 Date: Fri Jan 20 10:03:34 2006 +0100
50539 Atmel MACB ethernet driver
50541 Driver for the Atmel MACB on-chip ethernet controller.
50543 This driver has been tested on the ATSTK1000 board with a AT32AP7000
50544 CPU. It should probably work on AT91SAM926x as well with some minor
50547 Hardware documentation can be found in the AT32AP7000 data sheet,
50548 which can be downloaded from
50550 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
50552 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50554 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
50555 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50556 Date: Sun Dec 17 16:56:14 2006 +0100
50558 AVR32: Add clk and gpio infrastructure for macb0 and macb1
50560 Implement functions for configuring the macb0 and macb1 pins, as
50561 well as functions for getting the clock rate of the various
50562 busses the macb ethernet controllers are connected to.
50564 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50566 commit d5acb95b16a0a74c643524342c3437e765426d05
50567 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50568 Date: Sun Dec 17 15:39:15 2006 +0100
50570 AVR32: Implement simple DMA memory allocator
50572 Implement dma_alloc_coherent() which returns cache-aligned
50573 uncacheable memory.
50575 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50577 commit 91975b0fea773c9e681fea8cf3349669f27685ee
50578 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50579 Date: Sun Dec 17 15:46:02 2006 +0100
50581 Import <linux/mii.h> from the Linux kernel
50583 Instead of creating yet another set of MII register definitions
50584 in the macb driver, here's a complete set of definitions for everyone
50587 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50589 commit 1b804b229556a4d862da93c0ec94e79419364b2c
50590 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50591 Date: Wed Mar 21 19:47:36 2007 +0100
50593 AVR32: Include more commands for ATSTK1000
50595 Include the imi, imls and jffs commands sets by default on ATSTK1000.
50596 Also define CONFIG_BOOTARGS to something more useful, define
50597 CONFIG_BOOTCOMMAND and enable autoboot by default.
50599 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50601 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
50602 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50603 Date: Wed Mar 21 19:44:48 2007 +0100
50605 AVR32: Provide a definition of struct stat
50607 Copy the definition of struct stat from the Linux kernel.
50609 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50611 commit 12f099c08167a7a51aeee623bc16dafd0841271c
50612 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50613 Date: Sun Dec 17 14:46:06 2006 +0100
50615 AVR32: Use initdram() instead of board_init_memories()
50617 Conform to the "standard" interface and use initdram() instead of
50618 board_init_memories() on AVR32. This enables us to get rid of the
50619 sdram_size member of the global_data struct as well.
50621 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50623 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
50624 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50625 Date: Mon Nov 20 15:53:10 2006 +0100
50627 AVR32: Relocate u-boot to SDRAM
50629 Relocate the u-boot image into SDRAM like everyone else does. This
50630 means that we can handle much larger .data and .bss than we used to.
50632 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50634 commit df548d3c3e2bbc40258713167859ffc2ce99a900
50635 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50636 Date: Sun Nov 19 18:06:53 2006 +0100
50638 AVR32: Resource management rewrite
50640 Rewrite the resource management code (i.e. I/O memory, clock gating,
50641 gpio) so it doesn't depend on any global state. This is necessary
50642 because this code is heavily used before relocation to RAM, so we
50643 can't write to any global variables.
50645 As an added bonus, this makes u-boot's memory footprint a bit smaller,
50646 although some functionality has been left out; all clocks are enabled
50647 all the time, and there's no checking for gpio line conflicts.
50649 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50651 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
50652 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50653 Date: Sat Nov 18 18:01:13 2006 +0100
50655 AVR32: Clean up memory-map.h for at32ap7000
50657 Convert spaces to tabs (must have missed this one last time around),
50658 sort the entries by address and group them together by bus
50661 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50663 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
50664 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50665 Date: Sat Nov 18 17:32:31 2006 +0100
50667 AVR32: Build position-independent u-boot
50669 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
50670 position independent. This will make relocation a lot easier.
50672 -mno-init-got means that gcc shouldn't emit code to load the GOT
50673 address into r6 in every function prologue. We do it once and for
50674 all in the early startup assembly code, so enabling this option
50675 makes u-boot a bit faster and smaller.
50677 The assembly parts have always been position-independent, so no code
50678 changes should be necessary.
50680 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50682 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
50683 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50684 Date: Sat Nov 18 17:24:31 2006 +0100
50686 AVR32: Use avr32-linux- cross-compilation prefix by default
50688 It doesn't really matter which toolchain you use to compile u-boot,
50689 but the avr32-linux one is probably what most people have installed.
50691 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50693 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
50694 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
50695 Date: Sat Nov 18 17:15:30 2006 +0100
50697 AVR32: Split start_u_boot into board_init_f and board_init_r
50699 Split the avr32 initialization code into a function to run before
50700 relocation, board_init_f and a function to run after relocation,
50701 board_init_r. For now, board_init_f simply calls board_init_r
50704 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
50706 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
50707 Author: Heiko Schocher <hs@pollux.denx.de>
50708 Date: Sat Apr 14 05:26:48 2007 +0200
50710 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
50711 clear the Display after reset.
50713 Signed-off-by: Heiko Schocher <hs@denx.de>
50715 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
50716 Author: Denis Peter <d.peter@mpl.ch>
50717 Date: Fri Apr 13 09:13:33 2007 +0200
50719 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
50721 Fix bug introduced by "Fix get_partition_info() parameter error in all
50722 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
50723 to use diskboot or scsiboot form another device than 0.
50725 Signed-off-by: Denis Peter <d.peter@mpl.ch>
50727 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
50728 Author: Greg Lopp <lopp@pobox.com>
50729 Date: Fri Apr 13 08:02:24 2007 +0200
50731 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
50733 Signed-of-by: Greg Lopp <lopp@pobox.com>
50734 Acked-by: Grant Likely <grant.likely@secretlab.ca>
50736 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
50737 Author: Xie Xiaobo <r63061@freescale.com>
50738 Date: Fri Mar 9 19:08:25 2007 +0800
50740 Fix two bugs for MPC83xx DDR2 controller SPD Init
50742 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
50743 the first bug is that the picos_to_clk routine introduces a huge
50744 rounding error in 83xx.
50745 the second bug is that the mode register write recovery field is
50746 tWR-1, not tWR >> 1.
50748 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
50749 Author: Jeffrey Mann <mannj@embeddedplanet.com>
50750 Date: Thu Apr 12 14:15:59 2007 +0200
50752 ppc4xx: Fix i2c divisor calcularion for PPC4xx
50754 This patch fixes changes the i2c_init(...) function to use the function
50755 get_OPB_freq() rather than calculating the OPB speed by
50756 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
50757 specific per processor. The prior method was not and so was calculating
50758 the wrong speed for some PPC4xx processors.
50760 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
50761 Signed-off-by: Stefan Roese <sr@denx.de>
50763 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
50764 Author: Wolfgang Denk <wd@denx.de>
50765 Date: Wed Apr 11 17:25:01 2007 +0200
50769 Signed-off-by: Wolfgang Denk <wd@denx.de>
50771 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
50772 Author: Wolfgang Denk <wd@denx.de>
50773 Date: Wed Apr 11 17:22:55 2007 +0200
50775 Update for SC3 board
50777 * Make IDE timeout configurable through ide_reset_timeout variable.
50778 * Use Newline as "password" string
50779 * Use just a single partition in NAND flash
50781 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
50782 Author: Haiying Wang <haiying.wang@freescale.com>
50783 Date: Mon Jan 22 12:37:30 2007 -0600
50785 Add PIXIS FPGA support for MPC8641HPCN board.
50787 Move the 8641HPCN's PIXIS code to the new directory
50788 board/freescale/common/ as it will be shared by
50789 future boards not in the same processor family.
50791 Write a "pixis_reset" command that utilizes the FPGA
50792 reset sequencer to support alternate soft-reset options
50793 such as using the "alternate" flash bank, enabling
50794 the watch dog, or choosing different CPU frequencies.
50796 Add documentation for the pixis_reset to README.mpc8641hpcn.
50798 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
50799 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50801 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
50802 Author: Gerald Van Baren <vanbaren@cideas.com>
50803 Date: Fri Apr 6 14:19:43 2007 -0400
50805 Moved fdt command support code to fdt_support.c
50807 ...in preparation for improving the bootm command's handling of fdt blobs.
50808 Also cleaned up some coding sloppiness.
50810 commit 6679f9299534e488a171a9bb8f9bb891de247aab
50811 Author: Gerald Van Baren <vanbaren@cideas.com>
50812 Date: Fri Apr 6 14:17:14 2007 -0400
50814 libfdt: Make fdt_check_header() public
50816 Changed _fdt_check_header() to fdt_check_header() and made it part of
50817 the interface - it is a useful routine.
50819 Also did some asthetics cleanup to the include files (headers).
50821 commit c0707ce65677650b5ceab0500ee50ae5168afef2
50822 Author: Aubrey Li <aubrey.adi@gmail.com>
50823 Date: Thu Apr 5 18:34:06 2007 +0800
50825 [Blackfin][PATCH] Kill off a bunch of common local prototypes
50827 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
50828 Author: Aubrey Li <aubrey.adi@gmail.com>
50829 Date: Thu Apr 5 18:33:04 2007 +0800
50831 [Blackfin][PATCH] Fix dynamic CPLB generation issue
50833 commit 0445e3a264251d75b1be45ef713c70726a2952f0
50834 Author: Aubrey Li <aubrey.adi@gmail.com>
50835 Date: Thu Apr 5 18:31:47 2007 +0800
50837 [Blackfin][PATCH] minior cleanup
50839 commit 155fd766573981090e638b493d5857562151862e
50840 Author: Aubrey Li <aubrey.adi@gmail.com>
50841 Date: Thu Apr 5 18:31:18 2007 +0800
50843 [Blackfin][PATCH] Fix copyright and update license
50845 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
50846 Author: Aubrey Li <aubrey.adi@gmail.com>
50847 Date: Thu Apr 5 18:30:25 2007 +0800
50849 [Blackfin][PATCH] Add BF537 EMAC driver initialization
50851 commit 889256e8604e0c68db1d866d720894dffede9df6
50852 Author: Aubrey Li <aubrey.adi@gmail.com>
50853 Date: Thu Apr 5 18:29:55 2007 +0800
50855 [Blackfin][PATCH] call real the system synchronize instruction
50857 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
50858 Author: Aubrey Li <aubrey.adi@gmail.com>
50859 Date: Thu Apr 5 18:29:17 2007 +0800
50861 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
50863 commit dfeeab2cd680df047e68e723b246adf6f33bb556
50864 Author: Aubrey Li <aubrey.adi@gmail.com>
50865 Date: Thu Apr 5 18:28:34 2007 +0800
50867 [Blackfin][PATCH]: fix flash unaligned copy issue
50869 commit 443feb740584e406efa203af909fe2926608e8d5
50870 Author: Igor Marnat <marny@rambler.ru>
50871 Date: Wed Mar 21 09:55:01 2007 +0300
50873 Update usage of 'nc' in README.NetConsole
50875 Added information about usage of NetConsole on systems where the -l and -p
50876 switches are mutually exclusive.
50878 Signed-off-by: Igor Marnat <marny@rambler.ru>
50879 Signed-off-by: Ben Warren <bwarren@qstreams.com>
50881 commit 31c98a88228021b314c89ebb8104fb6473da4471
50882 Author: Wolfgang Denk <wd@denx.de>
50883 Date: Wed Apr 4 02:09:30 2007 +0200
50885 Minor coding style cleanup.
50887 commit 94abd7c0583ebe01e799b25f451201deeaab550d
50888 Author: Wolfgang Denk <wd@denx.de>
50889 Date: Wed Apr 4 01:49:15 2007 +0200
50893 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
50894 Author: Rodolfo Giometti <giometti@enneenne.com>
50895 Date: Tue Apr 3 14:27:18 2007 +0200
50897 Support for the Philips ISP116x HCD (Host Controller Driver)
50899 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
50901 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
50902 Author: Markus Klotzbuecher <mk@denx.de>
50903 Date: Tue Apr 3 14:27:08 2007 +0200
50905 USB: cleanup monahans usb support. Remove dead code.
50907 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
50909 commit a65c5768e5537530bd1780af3d3fddc3113a163c
50910 Author: Stefan Roese <sr@denx.de>
50911 Date: Mon Apr 2 10:09:30 2007 +0200
50913 ppc4xx: Change SysACE address on Katmai
50915 With this new base address of the Xilinx SystemACE controller
50916 the Linux driver will be easier to adapt, since it can now be
50917 mapped via the "normal" ioremap() call.
50919 Signed-off-by: Stefan Roese <sr@denx.de>
50921 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
50922 Author: Gerald Van Baren <vanbaren@cideas.com>
50923 Date: Sat Mar 31 14:30:53 2007 -0400
50925 Fix some minor whitespace violations.
50927 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
50928 Author: Gerald Van Baren <vanbaren@cideas.com>
50929 Date: Sat Mar 31 12:23:51 2007 -0400
50931 Add a flattened device tree (fdt) command (2 of 2)
50933 Modifications to the existing code to support the new fdt command.
50935 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
50936 Author: Gerald Van Baren <vanbaren@cideas.com>
50937 Date: Sat Mar 31 12:22:10 2007 -0400
50939 Add a flattened device tree (fdt) command (1 of 2)
50941 The fdt command uses David Gibson's libfdt library to manipulate as well
50942 as print the flattened device tree. This patch is the new command,
50943 the second part is the modifications to the existing code.
50945 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
50946 Author: Gerald Van Baren <vanbaren@cideas.com>
50947 Date: Sat Mar 31 12:13:43 2007 -0400
50949 libfdt: Enhanced and published fdt_next_tag()
50951 Enhanced the formerly private function _fdt_next_tag() to allow stepping
50952 through the tree, used to produce a human-readable dump, and made
50953 it part of the published interface.
50954 Also added some comments.
50956 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
50957 Author: Gerald Van Baren <vanbaren@cideas.com>
50958 Date: Sat Mar 31 12:05:39 2007 -0400
50960 libfdt: Customizations for use by u-boot.
50962 Changes to David Gibson's original source to fit into u-boot's
50963 environment. No functionality changes.
50965 commit 35748177c64a4a83a00057e93bb33e40278a2a96
50966 Author: Gerald Van Baren <vanbaren@cideas.com>
50967 Date: Sat Mar 31 12:00:56 2007 -0400
50969 libfdt: Import libfdt source (2 of 2)
50971 This adds the applicable libfdt source files (unmodified) and a README
50972 to explain where the source came from.
50974 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
50975 Author: Gerald Van Baren <vanbaren@cideas.com>
50976 Date: Sat Mar 31 11:59:59 2007 -0400
50978 libfdt: Import libfdt source (1 of 2)
50980 This adds the applicable libfdt source files (unmodified) and a README
50981 to explain where the source came from.
50983 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
50984 Author: Stefan Roese <sr@denx.de>
50985 Date: Sat Mar 31 13:16:23 2007 +0200
50987 ppc4xx: Update Katmai bootstrap command
50989 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
50992 Signed-off-by: Stefan Roese <sr@denx.de>
50994 commit cabee756a6532986729477c3cc1ea16ef8517ad2
50995 Author: Stefan Roese <sr@denx.de>
50996 Date: Sat Mar 31 13:15:06 2007 +0200
50998 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
51000 Additional RAM information is now printed upon powerup, like
51001 DDR2 frequency and CAS latency.
51003 Signed-off-by: Stefan Roese <sr@denx.de>
51005 commit 60723803431ac75cad085690789e433d5ab9174e
51006 Author: Stefan Roese <sr@denx.de>
51007 Date: Sat Mar 31 08:48:36 2007 +0200
51009 ppc4xx: Change Yucca config file to support ECC
51011 With the updated 44x DDR2 driver the Yucca board now supports
51012 ECC generation and checking.
51014 Signed-off-by: Stefan Roese <sr@denx.de>
51016 commit 490e5730c674b20d708b783a2c5ffd7208f83873
51017 Author: Stefan Roese <sr@denx.de>
51018 Date: Sat Mar 31 08:47:34 2007 +0200
51020 ppc4xx: Fix "bootstrap" command for Katmai board
51022 The board specific "bootstrap" command is now fixed and can
51023 be used for the AMCC Katmai board to configure different
51024 CPU/PLB/OPB frequencies.
51026 Signed-off-by: Stefan Roese <sr@denx.de>
51028 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
51029 Author: Stefan Roese <sr@denx.de>
51030 Date: Sat Mar 31 08:46:08 2007 +0200
51032 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
51034 Fix a bug in the auto calibration routine. This driver now runs
51035 more reliable with the tested modules. It's also tested with
51036 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
51038 Signed-off-by: Stefan Roese <sr@denx.de>
51040 commit 342cd097be1e7affe82f42ab3da220959a699e64
51041 Author: Michal Simek <monstr@monstr.eu>
51042 Date: Fri Mar 30 22:52:09 2007 +0200
51044 [PATCH] Clean include dependence
51046 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
51047 Author: Michal Simek <monstr@monstr.eu>
51048 Date: Fri Mar 30 22:42:45 2007 +0200
51050 [CLEAN] Remove inefficient Suzaku code
51052 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
51053 Author: Stefan Roese <sr@denx.de>
51054 Date: Wed Mar 28 15:03:16 2007 +0200
51056 Merge some AMCC make targets to keep the top-level Makefile smaller
51058 Signed-off-by: Stefan Roese <sr@denx.de>
51060 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
51061 Author: Stefan Roese <sr@denx.de>
51062 Date: Wed Mar 28 14:52:12 2007 +0200
51064 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
51066 The "old" i2c commands (iprobe, imd...) are now compiled in again,
51067 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
51070 Signed-off-by: Stefan Roese <sr@denx.de>
51072 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
51073 Author: Michal Simek <monstr@monstr.eu>
51074 Date: Tue Mar 27 00:32:16 2007 +0200
51076 PATCH: Resolve GPL license problem
51078 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
51079 Author: Rodolfo Giometti <giometti@enneenne.com>
51080 Date: Mon Mar 26 12:03:36 2007 +0200
51082 PXA: pxa27x USB OHCI support
51084 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
51086 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
51087 Author: Markus Klotzbuecher <mk@denx.de>
51088 Date: Mon Mar 26 11:21:05 2007 +0200
51090 USB: remove the S3C24X0_merge #define, which was introduced while
51091 merging OHCI drivers.
51093 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
51095 commit 1798049522f594013aea29457d46794298c6ae15
51096 Author: Michal Simek <root@monstr.eu>
51097 Date: Mon Mar 26 01:39:07 2007 +0200
51099 Support for XUPV2P board
51101 BSP autoconfig support
51103 commit 0d974d5297349504a2ddfa09314be573b5df320a
51104 Author: Stefan Roese <sr@denx.de>
51105 Date: Sat Mar 24 15:57:09 2007 +0100
51107 [PATCH] Add 4xx GPIO functions
51109 This patch adds some 4xx GPIO functions. It also moves some of the
51110 common code and defines into a common 4xx GPIO header file.
51112 Signed-off-by: Stefan Roese <sr@denx.de>
51114 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
51115 Author: Stefan Roese <sr@denx.de>
51116 Date: Sat Mar 24 15:55:58 2007 +0100
51118 [PATCH] Small Sequoia cleanup
51120 Signed-off-by: Stefan Roese <sr@denx.de>
51122 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
51123 Author: Stefan Roese <sr@denx.de>
51124 Date: Sat Mar 24 15:45:34 2007 +0100
51126 [PATCH] Clean up 40EZ/Acadia support
51128 This patch cleans up all the open issue of the preliminary
51131 Signed-off-by: Stefan Roese <sr@denx.de>
51133 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
51134 Author: Jon Loeliger <jdl@freescale.com>
51135 Date: Tue Dec 12 11:02:20 2006 -0600
51137 Fix 8641HPCN problem with ld version 2.16
51139 (Dot outside sections problem).
51141 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
51143 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51145 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
51146 Author: Haiying Wang <haiying.wang@freescale.com>
51147 Date: Thu Dec 7 10:35:55 2006 -0600
51149 Set Rev 2.x 86xx PIC in mixed mode.
51151 Prevent false interrupt from hanging Linux as MSR[EE] is set
51152 to enable interrupts by changing the PIC out of the default
51153 pass through mode into mixed mode.
51155 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
51156 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51158 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
51159 Author: Jason Jin <jason.jin@freescale.com>
51160 Date: Thu Dec 7 10:32:35 2006 -0600
51162 Add flash cmd function to 8641HPCN ramboot
51164 Also fixes some commmand for 8641 HPCN ramboot case.
51166 Signed-off-by: Jason Jin <jason.jin@freescale.com>
51167 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51169 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
51170 Author: Ed Swarthout <ed.swarthout@freescale.com>
51171 Date: Thu Dec 7 10:34:14 2006 -0600
51173 Add support for 8641 Rev 2 silicon.
51175 Without this patch, I am unable to get to the prompt on rev 2 silicon.
51176 Only set ddrioovcr for rev1.
51178 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
51179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51181 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
51182 Author: Wolfgang Denk <wd@denx.de>
51183 Date: Thu Mar 22 00:13:12 2007 +0100
51185 Code cleanup / re-insert previous Copyright entries.
51187 Signed-off-by: Wolfgang Denk <wd@denx.de>
51189 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
51190 Author: Wolfgang Denk <wd@denx.de>
51191 Date: Wed Mar 21 23:26:15 2007 +0100
51193 Code cleanup. Update CHANGELOG
51195 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
51196 Author: Stefan Roese <sr@denx.de>
51197 Date: Wed Mar 21 14:54:29 2007 +0100
51199 ppc4xx: Fix file mode of include/configs/acadia.h
51201 Signed-off-by: Stefan Roese <sr@denx.de>
51203 commit d5f4614c9350d9333e575100fb250aab774d0258
51204 Author: Markus Klotzbuecher <mk@denx.de>
51205 Date: Wed Mar 21 14:41:46 2007 +0100
51207 SPC1920: fix small clock routing bug
51209 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
51211 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
51212 Author: Stefan Roese <sr@denx.de>
51213 Date: Wed Mar 21 13:39:57 2007 +0100
51215 [PATCH] Add AMCC Acadia (405EZ) eval board support
51217 This patch adds support for the new AMCC Acadia eval board.
51219 Please note that this Acadia/405EZ support is still in a beta stage.
51220 Still lot's of cleanup needed but we need a preliminary release now.
51222 Signed-off-by: Stefan Roese <sr@denx.de>
51224 commit e01bd218b00af73499331a1a701625a852cd286f
51225 Author: Stefan Roese <sr@denx.de>
51226 Date: Wed Mar 21 13:38:59 2007 +0100
51228 [PATCH] Add AMCC PPC405EZ support
51230 This patch adds support for the new AMCC 405EZ PPC. It is in
51231 preparation for the AMCC Acadia board support.
51233 Please note that this Acadia/405EZ support is still in a beta stage.
51234 Still lot's of cleanup needed but we need a preliminary release now.
51236 Signed-off-by: Stefan Roese <sr@denx.de>
51238 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
51239 Author: Heiko Schocher <hs@pollux.denx.de>
51240 Date: Wed Mar 21 08:45:17 2007 +0100
51242 [PATCH] TQM8272: dont change the bits given from the HRCW
51243 for the SIUMCR and BCR Register.
51244 Fix the calculation for the EEprom Size
51246 Signed-off-by: Heiko Schocher <hs@denx.de>
51248 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
51249 Author: Aubrey Li <aubrey.adi@gmail.com>
51250 Date: Tue Mar 20 18:16:24 2007 +0800
51252 [Blackfin][PATCH] Add BF561 EZKIT board support
51254 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
51255 Author: Aubrey Li <aubrey.adi@gmail.com>
51256 Date: Mon Mar 19 22:55:58 2007 +0800
51258 [Blackfin][PATCH] minor cleanup
51260 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
51261 Author: Wolfgang Denk <wd@denx.de>
51262 Date: Mon Mar 19 13:10:08 2007 +0100
51264 Remove obsoleted POST files.
51266 Signed-off-by: Wolfgang Denk <wd@denx.de>
51268 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
51269 Author: Aubrey Li <aubrey.adi@gmail.com>
51270 Date: Mon Mar 19 01:26:11 2007 +0800
51272 [PATCH] Add flash chip M29W320ET/B support
51274 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
51275 Author: Aubrey Li <aubrey.adi@gmail.com>
51276 Date: Mon Mar 19 01:24:52 2007 +0800
51278 [Blackfin][PATCH] Add BF537 stamp board support
51280 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
51281 Author: Stefan Roese <sr@denx.de>
51282 Date: Fri Mar 16 21:11:42 2007 +0100
51284 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
51286 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
51287 DDR memory are dynamically programmed matching the total size
51288 of the equipped memory (DIMM modules).
51290 Signed-off-by: Stefan Roese <sr@denx.de>
51292 commit 76d1466f918b881cda2d259254761e73885093c2
51293 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51294 Date: Tue Mar 13 13:38:05 2007 +0100
51296 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
51297 boards in terms of unification.
51299 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51301 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
51302 Author: Wolfgang Denk <wd@denx.de>
51303 Date: Tue Mar 13 16:05:55 2007 +0100
51305 Make SC3 board build with 'make O='; use 'addcons' consistently
51306 (SC3 and Jupiter used to use 'addcon' instead).
51308 Signed-off-by: Wolfgang Denk wd@denx.de
51310 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
51311 Author: Heiko Schocher <hs@pollux.denx.de>
51312 Date: Tue Mar 13 09:40:59 2007 +0100
51314 [PATCH] update board config for jupiter Board:
51316 CONFIG_CMDLINE_EDITING,
51317 CFG_ENV_ADDR_REDUND activated
51319 Signed-off-by: Heiko Schocher <hs@denx.de>
51321 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
51322 Author: Aubrey Li <aubrey.adi@gmail.com>
51323 Date: Mon Mar 12 12:11:55 2007 +0800
51325 [Blackfin][PATCH] minor cleanup
51327 commit bfa5754a58477ac917d21527cd0f079d87cf188e
51328 Author: Aubrey Li <aubrey.adi@gmail.com>
51329 Date: Mon Mar 12 01:42:06 2007 +0800
51331 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
51333 commit 8440bb14581a294375c34b91b42512f9753d1130
51334 Author: Aubrey Li <aubrey.adi@gmail.com>
51335 Date: Mon Mar 12 00:25:14 2007 +0800
51337 [Blackfin][PATCH] code cleanup
51339 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
51340 Author: Michal Simek <monstr@monstr.eu>
51341 Date: Sun Mar 11 13:48:24 2007 +0100
51343 [Microblaze][PATCH] part 2
51345 interrupt controller support
51349 board information support
51351 booting image support
51353 adding support for Xilinx ML401
51355 commit 76316a318de91f6184e7c22a10e02d275ade2441
51356 Author: Michal Simek <monstr@monstr.eu>
51357 Date: Sun Mar 11 13:42:58 2007 +0100
51359 [Microblaze][PATCH]
51361 interrupt controller support
51365 board information support
51367 booting image support
51369 adding support for Xilinx ML401
51371 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
51372 Author: Aubrey Li <aubrey.adi@gmail.com>
51373 Date: Sat Mar 10 23:49:29 2007 +0800
51375 [Blackfin][PATCH] code cleanup
51377 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
51378 Author: Aubrey.Li <aubrey.adi@gmail.com>
51379 Date: Fri Mar 9 13:40:56 2007 +0800
51381 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
51383 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
51384 Author: Aubrey.Li <aubrey.adi@gmail.com>
51385 Date: Fri Mar 9 13:38:44 2007 +0800
51387 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
51389 commit 992423ab43c2bcf6b704853bd00af77450915e20
51390 Author: Stefan Roese <sr@denx.de>
51391 Date: Thu Mar 8 23:00:08 2007 +0100
51393 ppc4xx: Fix file mode of sequoia.c
51395 Signed-off-by: Stefan Roese <sr@denx.de>
51397 commit eb92f613556800f7483666db09d9a237ad911d4a
51398 Author: Wolfgang Denk <wd@pollux.denx.de>
51399 Date: Thu Mar 8 22:52:51 2007 +0100
51403 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
51404 Author: John Otken john@softadvances.com <john@softadvances.com>
51405 Date: Thu Mar 8 09:39:48 2007 -0600
51407 ppc4xx: Clear Sequoia/Rainier security engine reset bits
51409 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
51411 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
51412 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51413 Date: Thu Mar 8 16:26:52 2007 +0100
51415 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
51417 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51419 commit d9fc703246840c4b268debf48c334ba55c597dc0
51420 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51421 Date: Thu Mar 8 16:25:47 2007 +0100
51423 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
51425 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51427 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
51428 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51429 Date: Thu Mar 8 16:23:11 2007 +0100
51431 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
51433 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51435 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
51436 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51437 Date: Thu Mar 8 16:20:32 2007 +0100
51439 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
51441 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51443 commit f9fc6a5852a6335840882fa2111925010eea1abe
51444 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51445 Date: Wed Mar 7 15:32:01 2007 +0100
51447 fixed ethernet phy configuration for plu405 board
51449 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51451 commit 769104c9356594deb2092e204a39c05b33202d6c
51452 Author: Wolfgang Denk <wd@pollux.denx.de>
51453 Date: Thu Mar 8 21:49:27 2007 +0100
51457 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
51458 Author: Stefan Roese <sr@denx.de>
51459 Date: Thu Mar 8 10:13:16 2007 +0100
51461 [PATCH] Update AMCC Luan 440SP eval board support
51463 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
51464 inititializition. This includes DDR auto calibration and support
51465 for different DIMM modules, instead of the fixed setup used in
51466 the earlier version.
51468 This patch also enables the cache in FLASH for the startup
51469 phase of U-Boot (while running from FLASH). After relocating to
51470 SDRAM the cache is disabled again. This will speed up the boot
51471 process, especially the SDRAM setup, since there are some loops
51472 for memory testing (auto calibration).
51474 Signed-off-by: Stefan Roese <sr@denx.de>
51476 commit 2f5df47351910a2936c7741cf111855829200943
51477 Author: Stefan Roese <sr@denx.de>
51478 Date: Thu Mar 8 10:10:18 2007 +0100
51480 [PATCH] Update AMCC Yucca 440SPe eval board support
51482 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
51483 inititializition. This includes DDR auto calibration and support
51484 for different DIMM modules, instead of the fixed setup used in
51485 the earlier version.
51487 Signed-off-by: Stefan Roese <sr@denx.de>
51489 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
51490 Author: Stefan Roese <sr@denx.de>
51491 Date: Thu Mar 8 10:07:18 2007 +0100
51493 ppc4xx: Small AMCC Katmai 440SPe update
51495 Signed-off-by: Stefan Roese <sr@denx.de>
51497 commit df294497479b1dca6dd86318b2a912f72fede0df
51498 Author: Stefan Roese <sr@denx.de>
51499 Date: Thu Mar 8 10:06:09 2007 +0100
51501 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
51503 Signed-off-by: Stefan Roese <sr@denx.de>
51505 commit 83853178bd36bca6f0f8f1331476620c84a587fc
51506 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51507 Date: Wed Mar 7 12:14:50 2007 -0600
51509 net - Support ping reply when processing net-loop
51511 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
51513 This permits the ping command to test the phy interface when the phy
51514 is put in loopback mode (typically by setting register 0 bit 14).
51516 It also allows the port to respond to an external ping when u-boot is
51517 processing some other net command (such as tftp). This is useful when
51518 tftp appears to hang.
51520 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51521 Signed-off-by: Ben Warren <bwarren@qstreams.com>
51523 commit fa1aef15bcd47736687be1af544506e90fba545d
51524 Author: Stefan Roese <sr@denx.de>
51525 Date: Wed Mar 7 16:43:00 2007 +0100
51527 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
51529 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
51530 DDR memory are dynamically programmed matching the total size
51531 of the equipped memory (DIMM modules).
51533 Signed-off-by: Stefan Roese <sr@denx.de>
51535 commit e2ebe696818939e2b974628be9c921ea3fe9de13
51536 Author: Stefan Roese <sr@denx.de>
51537 Date: Wed Mar 7 16:39:36 2007 +0100
51539 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
51541 This patch fixes a problem that occurs when 2 DIMM's are
51542 used. This problem was first spotted and fixed by Gerald Jackson
51543 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
51544 problem in a little more clever way.
51546 This patch also adds the nice functionality to dynamically
51547 create the TLB entries for the SDRAM (tlb.c). So we should
51548 never run into such problems with wrong (too short) TLB
51549 initialization again on these platforms.
51551 As this feature is new to the "old" 44x SPD DDR driver, it
51552 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
51554 Signed-off-by: Stefan Roese <sr@denx.de>
51556 commit 39218433983417b9df087976a79e3f80dd5e83d6
51557 Author: Wolfgang Denk <wd@denx.de>
51558 Date: Wed Mar 7 16:33:44 2007 +0100
51560 UC101: fix compiler warnings
51562 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
51563 Author: Wolfgang Denk <wd@pollux.denx.de>
51564 Date: Wed Mar 7 16:19:46 2007 +0100
51566 HMI1001: fix build error, cleanup compiler warnings.
51568 commit ad5bb451ade552c44bef9119d907929ebc2c126f
51569 Author: Wolfgang Denk <wd@pollux.denx.de>
51570 Date: Tue Mar 6 18:08:43 2007 +0100
51572 Restructure POST directory to support of other CPUs, boards, etc.
51574 commit a5284efd125967675b2e9c6ef7b95832268ad360
51575 Author: Wolfgang Denk <wd@pollux.denx.de>
51576 Date: Tue Mar 6 18:01:47 2007 +0100
51578 Fix HOSTARCH handling.
51579 Patch by Mike Frysinger, Mar 05 2007
51581 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
51582 Author: Stefan Roese <sr@denx.de>
51583 Date: Tue Mar 6 07:47:04 2007 +0100
51585 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
51587 As provided by the AMCC applications team, this patch optimizes the
51588 DDR2 setup for 166MHz bus speed. The values provided are also save
51589 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
51590 setup has to be adjusted as done in this patch.
51592 For this the NAND booting version had to include the "speed.c" file
51593 from the cpu/ppc4xx directory. With this addition the NAND SPL image
51594 will just fit into the 4kbytes of program space. gcc version 4.x as
51595 provided with ELDK 4.x is needed to generate this optimized code.
51597 Signed-off-by: Stefan Roese <sr@denx.de>
51599 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
51600 Author: Wolfgang Denk <wd@pollux.denx.de>
51601 Date: Sun Mar 4 01:36:05 2007 +0100
51605 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
51606 Author: Kim Phillips <kim.phillips@freescale.com>
51607 Date: Wed Feb 28 00:02:04 2007 -0600
51609 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
51611 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
51613 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
51614 Author: Kumar Gala <galak@kernel.crashing.org>
51615 Date: Tue Feb 27 23:51:42 2007 -0600
51617 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
51619 The config value for:
51627 Were not being used when setting the appropriate register
51630 * CFG_SCCR_USBMPHCM
51635 To allow full config of the SCCR.
51637 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
51638 that were just bogus.
51640 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
51642 commit d51b3cf371cd441030460ef19d36b2924c361b1a
51643 Author: Kim Phillips <kim.phillips@freescale.com>
51644 Date: Thu Feb 22 20:06:57 2007 -0600
51646 mpc83xx: update [local-]mac-address properties on UEC based devices
51648 8360 and 832x weren't updating their [local-]mac-address
51649 properties. This patch fixes that.
51651 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
51653 commit 61f4f912acbe60776c5e00df1ec94094ce672957
51654 Author: Timur Tabi <timur@freescale.com>
51655 Date: Tue Feb 13 10:41:42 2007 -0600
51657 mpc83xx: write MAC address to mac-address and local-mac-address
51659 Some device trees have a mac-address property, some have local-mac-address,
51660 and some have both. To support all of these device trees, this patch
51661 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
51662 This function already updates local-mac-address.
51664 Signed-off-by: Timur Tabi <timur@freescale.com>
51666 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
51667 Author: Kim Phillips <kim.phillips@freescale.com>
51668 Date: Tue Feb 27 18:41:08 2007 -0600
51670 mpc83xx: add command line editing by default
51672 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
51673 Author: Kim Phillips <kim.phillips@freescale.com>
51674 Date: Wed Feb 14 19:50:53 2007 -0600
51676 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
51678 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
51679 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
51681 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
51683 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
51684 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
51686 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
51687 Author: Xie Xiaobo <r63061@freescale.com>
51688 Date: Wed Feb 14 18:27:17 2007 +0800
51690 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
51692 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
51693 it pass DDR/DDR2 compliance tests.
51695 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
51697 commit b110f40bd180c6b560276589beedf753e97c46ce
51698 Author: Xie Xiaobo <r63061@freescale.com>
51699 Date: Wed Feb 14 18:27:06 2007 +0800
51701 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
51703 MPC8360E rev2.0 have new spridr,and PVR value,
51704 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
51706 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
51708 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
51709 Author: Xie Xiaobo <r63061@freescale.com>
51710 Date: Wed Feb 14 18:26:44 2007 +0800
51712 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
51714 MPC8349E rev3.1 have new spridr,and PVR value,
51715 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
51717 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
51719 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
51720 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
51721 Date: Wed Jan 31 11:04:19 2007 +0100
51723 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
51725 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
51726 which is used to se if an slave will ACK after receiving its address.
51728 Correct i2c probing to use this method as the old method could upset
51729 a slave as it wrote a data byte to it.
51731 Add a small delay in i2c_init() to let the controller
51732 shutdown any ongoing I2C activity.
51734 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
51736 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
51737 Author: Timur Tabi <timur@freescale.com>
51738 Date: Wed Jan 31 15:54:29 2007 -0600
51740 mpc83xx: Add support for the MPC8349E-mITX-GP
51742 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
51743 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
51744 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
51746 Signed-off-by: Timur Tabi <timur@freescale.com>
51748 commit fab16807adad350f618024350c6950165c247c72
51749 Author: Timur Tabi <timur@freescale.com>
51750 Date: Wed Jan 31 15:54:20 2007 -0600
51752 mpc83xx: Delete sdram_init() for MPC8349E-mITX
51754 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
51755 never does anything. This patch deletes it.
51757 Signed-off-by: Timur Tabi <timur@freescale.com>
51759 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
51760 Author: Dave Liu <daveliu@freescale.com>
51761 Date: Fri Jan 19 10:43:26 2007 +0800
51763 mpc83xx: Fix the LAW1/3 bug
51765 The patch solves the alignment problem of the local bus access windows to
51766 render accessible the memory bank and PHY registers of UPC 1 (starting at
51767 0xf801 0000). What we actually did was to adjust the sizes of the bus
51768 access windows so that the base address alignment requirement would be met.
51770 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
51771 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
51772 Signed-off-by: Dave Liu <daveliu@freescale.com>
51774 commit 97c4b397dce236a7318b304667bf89e59d08b17c
51775 Author: Kim Phillips <kim.phillips@freescale.com>
51776 Date: Tue Jan 30 16:15:31 2007 -0600
51778 mpc83xx: don't hang if watchdog configured on 8360, 832x
51780 don't hang if watchdog configured on 8360, 832x
51782 The watchdog programming model is the same across all 83xx devices;
51783 make the code reflect that.
51785 commit b70047478570e371ce7223be342ce98afea0f7d6
51786 Author: Kim Phillips <kim.phillips@freescale.com>
51787 Date: Tue Jan 30 16:15:21 2007 -0600
51789 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
51791 protect memcpy to bad address if a local-mac-address is missing from dt
51793 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
51794 Author: Kim Phillips <kim.phillips@freescale.com>
51795 Date: Tue Jan 30 16:15:04 2007 -0600
51797 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
51799 make 8360 default environment fdt be 8360 (not 8349)
51801 commit a28899c910024a0226331df07207b1038c300c93
51802 Author: Emilian Medve <Emilian.Medve@freescale.com>
51803 Date: Tue Jan 30 16:14:50 2007 -0600
51805 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
51807 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
51808 be used for busy-waiting since it strips the 'volatile' property from
51809 the bd variable. gcc3 was working by pure luck.
51811 This is a follow on patch to "Fix the UEC driver bug of QE"
51813 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
51814 Author: Kumar Gala <galak@kernel.crashing.org>
51815 Date: Tue Jan 30 14:08:30 2007 -0600
51817 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
51819 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
51820 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
51821 CONFIG_MPC834X so they are more generic.
51823 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
51825 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
51826 Author: Kim Phillips <kim.phillips@freescale.com>
51827 Date: Thu Jan 25 13:40:55 2007 -0600
51829 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
51831 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
51832 Author: Kim Phillips <kim.phillips@freescale.com>
51833 Date: Wed Jan 24 17:18:37 2007 -0600
51835 mpc83xx: sort Makefile targets
51837 reordered targets alphabetically
51839 commit 91e25769771c1164ed63ffca0add49f934ae3343
51840 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
51841 Date: Tue Jan 16 11:38:14 2007 -0500
51843 mpc83xx: U-Boot support for Wind River SBC8349
51845 I've redone the SBC8349 support to match git-current, which
51846 incorporates all the MPC834x updates from Freescale since the 1.1.6
51847 release, including the DDR changes.
51849 I've kept all the SBC8349 files as parallel as possible to the
51850 MPC8349EMDS ones for ease of maintenance and to allow for easy
51851 inspection of what was changed to support this board. Hence the SBC8349
51852 U-Boot has FDT support and everything else that the MPC8349EMDS has.
51854 Fortunately the Freescale updates added support for boards using CS0,
51855 but I had to change spd_sdram.c to allow for board specific settings for
51856 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
51857 default if the board doesn't specify a value.)
51859 Hopefully this should be mergeable as-is and require no whitespace
51860 cleanups or similar, but if something doesn't measure up then let me
51861 know and I'll fix it.
51866 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
51867 Author: Sam Song <samsongshu@yahoo.com.cn>
51868 Date: Thu Dec 14 19:03:21 2006 +0800
51870 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
51872 A redundant semicolon existed in mpc8349itx.c
51875 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
51877 commit f35f358241c549be3f75cfe2eaa642914275b7ba
51878 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
51879 Date: Wed Dec 6 21:23:55 2006 -0500
51881 mpc83xx: Put the version (and magic) after the HRCW.
51883 Put the version (and magic) after the HRCW. This puts it in a fixed
51884 location in flash, not at the start of flash but as close as we can get.
51886 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
51888 commit 48aecd969171a6e99a55fae04933857787f9a5bd
51889 Author: Dave Liu <r63238@freescale.com>
51890 Date: Thu Dec 7 21:14:51 2006 +0800
51892 mpc83xx: Add the MPC832XEMDS board readme
51894 Add the MPC832XEMDS board readme
51896 Signed-off-by: Dave Liu <daveliu@freescale.com>
51898 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
51899 Author: Dave Liu <r63238@freescale.com>
51900 Date: Thu Dec 7 21:13:15 2006 +0800
51902 mpc83xx: Add support for the MPC832XEMDS board
51904 This patch supports DUART, ETH3/4 and PCI etc.
51906 Signed-off-by: Dave Liu <daveliu@freescale.com>
51908 commit e080313c32322e15ab5a18eb896a252858c57284
51909 Author: Dave Liu <r63238@freescale.com>
51910 Date: Thu Dec 7 21:11:58 2006 +0800
51912 mpc83xx: streamline the 83xx immr head file
51914 For better format and style, I streamlined the 83xx head files,
51915 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
51916 duplicated macro definition appear in the both files; 2) the structure
51917 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
51918 macro definition put inside the each structure. So, I cleaned up the
51919 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
51920 moved the macro definition to mpc83xx.h, Just like MPC8260.
51924 *streamline the 83xx immr head file
51926 Signed-off-by: Dave Liu <daveliu@freescale.com>
51928 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
51929 Author: Dave Liu <r63238@freescale.com>
51930 Date: Wed Dec 6 11:38:17 2006 +0800
51932 mpc83xx: Fix the UEC driver bug of QE
51934 The patch prevents the GCC tool chain from striping useful code for
51935 optimization. It will make UEC ethernet driver workable, Otherwise the
51936 UEC will fail in tx when you are using gcc4.x. but the driver can work
51937 when using gcc3.4.3.
51941 *Prevent the GCC from striping code for optimization, Otherwise the UEC
51942 will tx failed when you are using gcc4.x.
51944 Signed-off-by: Dave Liu <daveliu@freescale.com>
51946 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
51947 Author: Stefan Roese <sr@denx.de>
51948 Date: Thu Mar 1 21:11:36 2007 +0100
51950 [PATCH] Update AMCC Katmai 440SPe eval board support
51952 This patch updates the recently added Katmai board support. The biggest
51953 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
51956 Please note, that still some problems are left with some memory
51957 configurations. See the driver for more details.
51959 Signed-off-by: Stefan Roese <sr@denx.de>
51961 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
51962 Author: Stefan Roese <sr@denx.de>
51963 Date: Thu Mar 1 07:03:25 2007 +0100
51965 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
51967 Signed-off-by: Stefan Roese <sr@denx.de>
51969 commit ccbc7036648e465697ca298ba51e0e76dda352a0
51970 Author: Wolfgang Denk <wd@pollux.denx.de>
51971 Date: Wed Feb 28 01:28:53 2007 +0100
51973 SC3: fix typo in default environment
51975 commit e344568b1b46af85ec32d815586f91bc115d6223
51976 Author: Sergei Poselenov <sposelenov@emcraft.com>
51977 Date: Tue Feb 27 20:15:30 2007 +0300
51979 MCC200: Fixes for update procedure
51981 - fix logic error in image type handling
51982 - make sure file system images (cramfs etc.) get stored in flash
51983 with image header stripped so they can be mounted through MTD
51985 commit 743571145b37182757d4e688a77860b36ee77573
51986 Author: Wolfgang Denk <wd@pollux.denx.de>
51987 Date: Tue Feb 27 14:26:04 2007 +0100
51989 Minor code cleanup.
51991 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
51992 Author: Sergei Poselenov <sposelenov@emcraft.com>
51993 Date: Tue Feb 27 12:40:16 2007 +0300
51995 MCC200 update - add LCD Progress Indicator
51997 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
51998 Author: Stefan Roese <sr@denx.de>
51999 Date: Thu Feb 22 07:43:34 2007 +0100
52001 [PATCH] get_dev() now unconditionally uses manual relocation
52003 Since the relocation fix is not included yet and we're not sure how
52004 it will be added, this patch removes code that required relocation
52005 to be fixed for now.
52007 Signed-off-by: Stefan Roese <sr@denx.de>
52009 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
52010 Author: Stefan Roese <sr@denx.de>
52011 Date: Thu Feb 22 07:40:23 2007 +0100
52013 [PATCH] Change systemace driver to select 8 & 16bit mode
52015 As suggested by Grant Likely this patch enables the Xilinx SystemACE
52016 driver to select 8 or 16bit mode upon startup.
52018 Signed-off-by: Stefan Roese <sr@denx.de>
52020 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
52021 Author: Haiying Wang <Haiying.Wang@freescale.com>
52022 Date: Wed Feb 21 16:52:31 2007 +0100
52024 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
52026 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
52027 is fully finished. The sync() is defined in each CPU's io.h file. For
52028 those CPUs which do not need sync for now, a dummy sync() is defined in
52029 their io.h as well.
52031 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
52033 commit da04995c7dc6772013a9a0dc5c767f190c402478
52034 Author: Stefan Roese <sr@denx.de>
52035 Date: Wed Feb 21 13:44:34 2007 +0100
52037 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
52039 Signed-off-by: Stefan Roese <sr@denx.de>
52041 commit 751bb57107d78978ae08e697c3deba816f5be091
52042 Author: Stefan Roese <sr@denx.de>
52043 Date: Tue Feb 20 13:21:57 2007 +0100
52045 [PATCH] Fix relocation problem with "new" get_dev() function
52047 This patch enables the "new" get_dev() function for block devices
52048 introduced by Grant Likely to be used on systems that still suffer
52049 from the relocation problems (manual relocation neede because of
52050 problems with linker script).
52052 Hopefully we can resolve this relocation issue soon for all platform
52053 so we don't need this additional code anymore.
52055 Signed-off-by: Stefan Roese <sr@denx.de>
52057 commit d93e2212f962668b3dce091ff5edc33f2347fe37
52058 Author: Stefan Roese <sr@denx.de>
52059 Date: Tue Feb 20 13:17:42 2007 +0100
52061 [PATCH] Update SystemACE driver for 16bit access
52063 This patch removes some problems when the Xilinx SystemACE driver
52064 is used with 16bit access on an big endian platform (like the
52067 Signed-off-by: Stefan Roese <sr@denx.de>
52069 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
52070 Author: Stefan Roese <sr@denx.de>
52071 Date: Tue Feb 20 13:15:40 2007 +0100
52073 [PATCH] Clean up Katmai (440SPe) linker script
52075 Signed-off-by: Stefan Roese <sr@denx.de>
52077 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
52078 Author: Stefan Roese <sr@denx.de>
52079 Date: Tue Feb 20 10:57:08 2007 +0100
52081 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
52083 Signed-off-by: Stefan Roese <sr@denx.de>
52085 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
52086 Author: Stefan Roese <sr@denx.de>
52087 Date: Tue Feb 20 10:51:26 2007 +0100
52089 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
52091 This patch switches to the desired I2C bus when the date/dtt
52092 commands are called. This can be configured using the
52093 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
52095 Signed-off-by: Stefan Roese <sr@denx.de>
52097 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
52098 Author: Stefan Roese <sr@denx.de>
52099 Date: Tue Feb 20 10:43:34 2007 +0100
52101 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
52103 This patch adds support for the DDR2 controller used on the
52104 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
52105 board and works fine with the following DIMM modules:
52107 - Corsair CM2X512-5400C4 (512MByte per DIMM)
52108 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
52109 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
52111 This patch also adds the nice functionality to dynamically
52112 create the TLB entries for the SDRAM (tlb.c). So we should
52113 never run into such problems with wrong (too short) TLB
52114 initialization again on these platforms.
52116 Signed-off-by: Stefan Roese <sr@denx.de>
52118 commit 36d830c9830379045f5daa9f542ac1c990c70068
52119 Author: Stefan Roese <sr@denx.de>
52120 Date: Tue Feb 20 10:35:42 2007 +0100
52122 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
52124 Since the existing 4xx SPD SDRAM initialization routines for the
52125 405 SDRAM controller and the 440 DDR controller don't have much in
52126 common this patch splits both drivers into different files.
52128 This is in preparation for the 440 DDR2 controller support (440SP/e).
52130 Signed-off-by: Stefan Roese <sr@denx.de>
52132 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
52133 Author: Stefan Roese <sr@denx.de>
52134 Date: Tue Feb 20 10:27:08 2007 +0100
52136 [PATCH] PPC4xx: Add support for multiple I2C busses
52138 This patch adds support for multiple I2C busses on the PPC4xx
52139 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
52140 to make use of this feature.
52142 It also merges the 405 and 440 i2c header files into one common
52145 Also the 4xx i2c reset procedure is reworked since I experienced
52146 some problems with the first access on the 440SPe Katmai board.
52148 Signed-off-by: Stefan Roese <sr@denx.de>
52150 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
52151 Author: Grant Likely <grant.likely@secretlab.ca>
52152 Date: Tue Feb 20 09:05:45 2007 +0100
52154 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
52156 Block device read/write is anonymous data; there is no need to use a
52157 typed pointer. void * is fine. Also add a hook for block_read functions
52159 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52161 commit 53758fa20e935cc87eeb0519ed365df753a6f289
52162 Author: Grant Likely <grant.likely@secretlab.ca>
52163 Date: Tue Feb 20 09:05:38 2007 +0100
52165 [PATCH 8_9] Add block_write hook to block_dev_desc_t
52167 Preparation for future patches which support block device writing
52169 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52171 commit f4852ebe6ca946a509667eb68be42026f837be76
52172 Author: Grant Likely <grant.likely@secretlab.ca>
52173 Date: Tue Feb 20 09:05:31 2007 +0100
52175 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
52177 Register read/write does not need to be wrapped in a full function. The
52178 patch replaces them with macros.
52180 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52182 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
52183 Author: Grant Likely <grant.likely@secretlab.ca>
52184 Date: Tue Feb 20 09:05:23 2007 +0100
52186 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
52188 The code in this file is not a command; it is a device driver. Put it in
52189 the correct place. There are zero functional changes in this patch, it
52190 only moves the file.
52192 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52194 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
52195 Author: Grant Likely <grant.likely@secretlab.ca>
52196 Date: Tue Feb 20 09:05:16 2007 +0100
52198 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
52200 This patch is in preparation of additional changes to the sysace driver.
52201 May as well take this opportunity to fixup the inconsistent whitespace since
52202 this file is about to undergo major changes anyway.
52204 There are zero functional changes in this patch. It only cleans up the
52207 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52209 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
52210 Author: Grant Likely <grant.likely@secretlab.ca>
52211 Date: Tue Feb 20 09:05:07 2007 +0100
52213 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
52215 isprint is already defined in ctype.c
52217 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52219 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
52220 Author: Grant Likely <grant.likely@secretlab.ca>
52221 Date: Tue Feb 20 09:05:00 2007 +0100
52223 [PATCH 3_9] Move buffer print code from md command to common function
52225 Printing a buffer is a darn useful thing. Move the buffer print code
52226 into print_buffer() in lib_generic/
52228 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52230 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
52231 Author: Grant Likely <grant.likely@secretlab.ca>
52232 Date: Tue Feb 20 09:04:52 2007 +0100
52234 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
52236 Change the xilinx device drivers and board code to include config.h
52237 instead of xparameters.h directly. config.h always includes the
52238 correct xparameters file. This change reduces the posibility of
52239 including the wrong file when adding a new xilinx board port
52241 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52243 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
52244 Author: Grant Likely <grant.likely@secretlab.ca>
52245 Date: Tue Feb 20 09:04:34 2007 +0100
52247 [PATCH 1_4] Merge common get_dev() routines for block devices
52249 Each of the filesystem drivers duplicate the get_dev routine. This change
52250 merges them into a single function in part.c
52252 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52254 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
52255 Author: Wolfgang Denk <wd@pollux.denx.de>
52256 Date: Mon Feb 19 23:09:51 2007 +0100
52258 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
52259 as root file system images.
52261 commit 489c696ae7211218961d159e43e722d74c36fcbc
52262 Author: Sergei Poselenov <sposelenov@emcraft.com>
52263 Date: Wed Feb 14 14:30:28 2007 +0300
52265 MCC200: Extensions to Software Update Mechanism
52267 Update / extend Software Update Mechanism for MCC200 board:
52269 - Add support for rootfs image added. The environment variables
52270 "rootfs_st" and "rootfs_nd" can be used to override the default
52271 values of the image start and end.
52272 - Remove excessive key check code.
52275 commit 4be23a12f23f1372634edc3215137b09768b7949
52276 Author: Stefan Roese <sr@denx.de>
52277 Date: Mon Feb 19 08:23:15 2007 +0100
52279 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
52281 As spotted by Matthias Fuchs, the READY input should not be
52282 enabled for the NOR FLASH on the Sequoia board.
52284 Signed-off-by: Stefan Roese <sr@denx.de>
52286 commit 2605e90bf676d48123afe5719a846d2b52b24aac
52287 Author: Heiko Schocher <hs@pollux.denx.de>
52288 Date: Fri Feb 16 07:57:42 2007 +0100
52290 [PATCH] Added support for the jupiter board.
52292 Signed-off-by: Heiko Schocher <hs@denx.de>
52294 commit 497d012e5be0194e1084073d0081eb1a844796b2
52295 Author: Gary Jennejohn <garyj@pollux.denx.de>
52296 Date: Mon Feb 12 13:11:50 2007 +0100
52298 LPC2292: patch from Siemens.
52300 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
52301 Author: Stefan Roese <sr@denx.de>
52302 Date: Sat Feb 10 08:49:31 2007 +0100
52304 [PATCH] Add missing p3mx.h file to repository (ups)
52306 Signed-off-by: Stefan Roese <sr@denx.de>
52308 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
52309 Author: Bartlomiej Sieka <tur@semihalf.com>
52310 Date: Fri Feb 9 10:45:42 2007 +0100
52312 [Motion-PRO] Preliminary support for the Motion-PRO board.
52314 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
52315 Author: Stefan Roese <sr@denx.de>
52316 Date: Wed Feb 7 16:51:08 2007 +0100
52318 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
52320 Some boards that can have more than 768MBytes of SDRAM need to
52321 set "initrd_high", so that the initrd can be accessed by the
52324 Signed-off-by: Stefan Roese <sr@denx.de>
52326 commit 7372ca68227930d03cffa548310524cad5b96733
52327 Author: Stefan Roese <sr@denx.de>
52328 Date: Fri Feb 2 12:44:22 2007 +0100
52330 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
52332 Previously the strapping DCR/SDR was read to determine if the internal PCI
52333 arbiter is enabled or not. This strapping bit can be overridden, so now
52334 the current status is read from the correct DCR/SDR register.
52336 Signed-off-by: Stefan Roese <sr@denx.de>
52338 commit 2aa54f651a42d198673318f07a20c89a43e4d197
52339 Author: Stefan Roese <sr@denx.de>
52340 Date: Fri Feb 2 12:42:08 2007 +0100
52342 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
52344 Signed-off-by: Stefan Roese <sr@denx.de>
52346 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
52347 Author: Stefan Roese <sr@denx.de>
52348 Date: Thu Feb 1 13:22:41 2007 +0100
52350 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
52352 When PCI PNP is enabled the pci pnp configuration routine is called
52353 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
52354 problems with some PCI cards. For now disable the PCI PNP configuration.
52356 Signed-off-by: Stefan Roese <sr@denx.de>
52358 commit 2902fadade3be7659467e8d074048c6b7068f5c0
52359 Author: Stefan Roese <sr@denx.de>
52360 Date: Wed Jan 31 16:56:10 2007 +0100
52362 [PATCH] Update 440EPx/440GRx cpu detection
52364 Signed-off-by: Stefan Roese <sr@denx.de>
52366 commit d5ea287b02a6945c3977410e364a879dd1a555c8
52367 Author: Stefan Roese <sr@denx.de>
52368 Date: Wed Jan 31 16:38:04 2007 +0100
52370 [PATCH] Update esd cpci5200 files
52372 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
52374 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
52375 Author: Stefan Roese <sr@denx.de>
52376 Date: Wed Jan 31 16:37:34 2007 +0100
52378 [PATCH] Add support for esd mecp5200 board
52380 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
52382 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
52383 Author: Stefan Roese <sr@denx.de>
52384 Date: Wed Jan 31 12:38:50 2007 +0100
52386 [PATCH] Remove unneccessary yellowstone board config file
52388 Signed-off-by: Stefan Roese <sr@denx.de>
52390 commit e802594b6fa1b166308820c276b96dc0d7cc731c
52391 Author: Stefan Roese <sr@denx.de>
52392 Date: Tue Jan 30 17:06:10 2007 +0100
52394 [PATCH] Update Sequoia (440EPx) config file
52396 The config file now handles the 2nd target, the Rainier (440GRx)
52397 evaluation board better. Additionally the PPC input clock was
52398 adjusted to match the correct value of 33.0 MHz.
52400 Signed-off-by: Stefan Roese <sr@denx.de>
52402 commit 700200c67e73b83751418abe7815840dca8fd6cb
52403 Author: Stefan Roese <sr@denx.de>
52404 Date: Tue Jan 30 17:04:19 2007 +0100
52406 [PATCH] Merge Yosemite & Yellowstone board ports
52408 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
52409 share one config file and all board specific files. This way we
52410 don't have to maintain two different sets of files for nearly
52413 Signed-off-by: Stefan Roese <sr@denx.de>
52415 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
52416 Author: Stefan Roese <sr@denx.de>
52417 Date: Tue Jan 30 15:01:49 2007 +0100
52419 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
52421 SCPU doesn't use redundant environment in flash.
52423 Signed-off-by: Stefan Roese <sr@denx.de>
52425 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
52426 Author: Stefan Roese <sr@denx.de>
52427 Date: Tue Jan 30 12:51:07 2007 +0100
52429 [PATCH] alpr: Update alpr board config file
52431 Signed-off-by: Stefan Roese <sr@denx.de>
52433 commit f8db84f132b1e335f20f96138a1f09ed97b08664
52434 Author: Wolfgang Denk <wd@pollux.denx.de>
52435 Date: Tue Jan 30 00:50:40 2007 +0100
52437 LPC2292 SODIMM port coding style cleanup.
52439 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
52440 Author: Gary Jennejohn <garyj@pollux.denx.de>
52441 Date: Wed Jan 24 12:16:56 2007 +0100
52443 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
52445 commit 2daf046ba627f85f44195815778140039636244e
52446 Author: Bartlomiej Sieka <tur@semihalf.com>
52447 Date: Tue Jan 23 17:22:06 2007 +0100
52449 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
52451 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
52452 Author: Bartlomiej Sieka <tur@semihalf.com>
52453 Date: Tue Jan 23 14:21:14 2007 +0100
52455 [iDMR] Flash driver on initialisation write-protects some sectors,
52456 currently sectors 0-3. Sector 3 does not need to be protected, though
52457 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
52458 fixes this, i.e., only sectors 0-2 are protected.
52460 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
52461 Author: Bartlomiej Sieka <tur@semihalf.com>
52462 Date: Tue Jan 23 14:11:22 2007 +0100
52464 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
52465 "mii device" results in "Unexpected exception"). Fixing this properly
52466 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
52467 this commit disables MII commads for now.
52469 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
52470 Author: Bartlomiej Sieka <tur@semihalf.com>
52471 Date: Tue Jan 23 13:25:22 2007 +0100
52473 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
52474 Identification Register (CIR).
52476 commit fdef388758506765d4d6a7155c8f1584c63ff581
52477 Author: roy zang <tie-fei.zang@freescale.com>
52478 Date: Mon Jan 22 13:19:21 2007 +0800
52480 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
52481 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
52482 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
52485 commit a4012396645533aef218354eeba754dff0deace8
52486 Author: Wolfgang Denk <wd@pollux.denx.de>
52487 Date: Fri Jan 19 23:08:39 2007 +0100
52489 Minor code cleanup.
52491 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
52492 Author: Heiko Schocher <hs@pollux.denx.de>
52493 Date: Fri Jan 19 19:57:10 2007 +0100
52495 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
52497 Signed-off-by: Heiko Schocher <hs@denx.de>
52499 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
52500 Author: Heiko Schocher <hs@pollux.denx.de>
52501 Date: Fri Jan 19 18:05:26 2007 +0100
52503 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
52504 if you must swap the bytes between reading/writing.
52505 (Needed for the SC3 board)
52507 Signed-off-by: Heiko Schocher <hs@denx.de>
52509 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
52510 Author: Stefan Roese <sr@denx.de>
52511 Date: Thu Jan 18 16:05:47 2007 +0100
52513 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
52515 Signed-off-by: Stefan Roese <sr@denx.de>
52517 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
52518 Author: Stefan Roese <sr@denx.de>
52519 Date: Thu Jan 18 11:54:52 2007 +0100
52521 [PATCH] Update Prodrive P3Mx support
52523 Signed-off-by: Stefan Roese <sr@denx.de>
52525 commit 34167a36c29ee946b727465db5c014746a08e978
52526 Author: Stefan Roese <sr@denx.de>
52527 Date: Thu Jan 18 11:48:10 2007 +0100
52529 [PATCH] Add missing Taishan config file
52531 Signed-off-by: Stefan Roese <sr@denx.de>
52533 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
52534 Author: Heiko Schocher <hs@pollux.denx.de>
52535 Date: Thu Jan 18 11:28:51 2007 +0100
52537 [PATCH] Fix: Compilerwarnings for SC3 board.
52538 The EBC Configuration Register is now by CFG_EBC_CFG definable
52539 Added JFFS2 support for the SC3 board.
52541 Signed-off-by: Heiko Schocher <hs@denx.de>
52543 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
52544 Author: Stefan Roese <sr@denx.de>
52545 Date: Thu Jan 18 10:25:34 2007 +0100
52547 [PATCH] Add support for AMCC Taishan PPC440GX eval board
52549 Signed-off-by: Stefan Roese <sr@denx.de>
52551 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
52552 Author: Wolfgang Denk <wd@pollux.denx.de>
52553 Date: Tue Jan 16 18:30:50 2007 +0100
52555 Raname solidcard3 into sc3; add redundant env for sc3
52557 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
52558 Author: Wolfgang Denk <wd@pollux.denx.de>
52559 Date: Tue Jan 16 12:46:35 2007 +0100
52561 Update default environment for Solidcard3
52563 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
52564 Author: Stefan Roese <sr@denx.de>
52565 Date: Mon Jan 15 09:46:29 2007 +0100
52567 [PATCH] Fix 440SPe rev B detection from previous patch
52569 Signed-off-by: Stefan Roese <sr@denx.de>
52571 commit a443d31410c571ee8f970da819a44d698fdd6b1f
52572 Author: Heiko Schocher <hs@pollux.denx.de>
52573 Date: Sun Jan 14 13:35:31 2007 +0100
52575 [FIX] correct I2C Writes for the LM81 Sensor.
52577 Signed-off-by: Heiko Schocher <hs@denx.de>
52579 commit 0bba5452835f19a61204edcda3a58112fd8e2208
52580 Author: Wolfgang Denk <wd@pollux.denx.de>
52581 Date: Sat Jan 13 11:17:10 2007 +0100
52583 Undo commit 3033ebb2: reset command does not take any arguments
52585 Haiying Wang's modification to the reset command was broken, undo it.
52587 Signed-off-by: Wolfgang Denk <wd@denx.de>
52589 commit 95981778cff0038fd9941044d6a3eda810e33258
52590 Author: Stefan Roese <sr@denx.de>
52591 Date: Sat Jan 13 08:01:03 2007 +0100
52593 [PATCH] Update 440SP(e) cpu revisions
52595 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
52597 Signed-off-by: Stefan Roese <sr@denx.de>
52599 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
52600 Author: Stefan Roese <sr@denx.de>
52601 Date: Sat Jan 13 07:59:56 2007 +0100
52603 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
52605 Now the board revision and the current PCI bus speed are printed after
52608 Also the EBC initialising is now done via defines in the board config
52611 Signed-off-by: Stefan Roese <sr@denx.de>
52613 commit 36adff362c2c0141ff8a810d42a7e478f779130f
52614 Author: Stefan Roese <sr@denx.de>
52615 Date: Sat Jan 13 07:59:19 2007 +0100
52617 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
52619 Now the board revision and the current PCI bus speed are printed after
52622 Also the EBC initialising is now done via defines in the board config
52625 Signed-off-by: Stefan Roese <sr@denx.de>
52627 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
52628 Author: Stefan Roese <sr@denx.de>
52629 Date: Sat Jan 13 07:57:51 2007 +0100
52631 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
52633 Now the board revision and the current PCI bus speed are printed after
52636 Signed-off-by: Stefan Roese <sr@denx.de>
52638 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
52639 Author: Heiko Schocher <hs@pollux.denx.de>
52640 Date: Thu Jan 11 15:44:44 2007 +0100
52642 Added support for the SOLIDCARD III board from Eurodesign
52644 Signed-off-by: Heiko Schocher <hs@denx.de>
52646 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
52647 Author: Reinhard Thies <Reinhard.Thies@web.de>
52648 Date: Wed Jan 10 14:41:14 2007 +0100
52650 Adjusted default environment for cam5200 board.
52652 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
52653 Author: Wolfgang Denk <wd@pollux.denx.de>
52654 Date: Wed Jan 10 15:35:52 2007 +0100
52658 commit 787fa15860a57833e50bd30555079a9cd4e519b8
52659 Author: Wolfgang Denk <wd@pollux.denx.de>
52660 Date: Wed Jan 10 01:28:39 2007 +0100
52662 Fix auto_update for MCC200 board.
52664 The invocation of do_auto_update() is moved to the end of the
52665 misc_init_r() function, after the flash mappings have been
52666 initialized. Please find attached a patch that implements that
52669 Also correct the decoding of the keypad status. With this update, the
52670 key that will trigger the update is Column 2, Row 2.
52672 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
52673 Author: Marian Balakowicz <m8@semihalf.com>
52674 Date: Wed Jan 10 00:26:15 2007 +0100
52676 CAM5200 flash driver modifications:
52677 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
52678 - add second build target 'cam5200_niosflash' which still uses custom driver
52680 commit 67fea022fa957f59653b5238c7496f80a6b70432
52681 Author: Markus Klotzbuecher <mk@denx.de>
52682 Date: Tue Jan 9 16:02:48 2007 +0100
52684 SPC1920: cleanup memory contoller setup
52686 commit 8fc2102faa23593c80381437c09f7745a14deb40
52687 Author: Markus Klotzbuecher <mk@denx.de>
52688 Date: Tue Jan 9 14:57:14 2007 +0100
52690 Fix the cpu speed setup to work with all boards.
52692 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
52693 Author: Markus Klotzbuecher <mk@denx.de>
52694 Date: Tue Jan 9 14:57:13 2007 +0100
52696 SPC1920: add support for the FM18L08 Ramtron FRAM
52698 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
52699 Author: Markus Klotzbuecher <mk@denx.de>
52700 Date: Tue Jan 9 14:57:13 2007 +0100
52702 SPC1920: update the HPI register addresses to work with the second
52703 generation of hardware
52705 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
52706 Author: Markus Klotzbuecher <mk@creamnet.de>
52707 Date: Tue Jan 9 14:57:13 2007 +0100
52709 Miscellanious spc1920 related cleanups
52711 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
52712 Author: Markus Klotzbuecher <mk@denx.de>
52713 Date: Tue Jan 9 14:57:12 2007 +0100
52715 SPC1920 GO/NOGO led should be set to color red in U-Boot
52717 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
52718 Author: Markus Klotzbuecher <mk@creamnet.de>
52719 Date: Tue Jan 9 14:57:12 2007 +0100
52721 Add support for the DS3231 RTC
52723 commit 8139567b60d678584b05f0718a681f2047c5e14f
52724 Author: Markus Klotzbuecher <mk@creamnet.de>
52725 Date: Tue Jan 9 14:57:11 2007 +0100
52727 SMC1 uses external CLK4 instead of BRG on spc1920
52729 commit d8d9de1a02fbd880b613d607143d1f57342affc7
52730 Author: Markus Klotzbuecher <mk@creamnet.de>
52731 Date: Tue Jan 9 14:57:10 2007 +0100
52733 Update the SPC1920 CMB PLD driver
52735 commit 3f34f869162750e5e999fd140f884f5de952bcfe
52736 Author: Markus Klotzbuecher <mk@creamnet.de>
52737 Date: Tue Jan 9 14:57:10 2007 +0100
52739 Add / enable I2C support on the spc1920 board
52741 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
52742 Author: Markus Klotzbuecher <mk@creamnet.de>
52743 Date: Tue Jan 9 14:57:10 2007 +0100
52745 Add support for the tms320671x host port interface (HPI)
52747 commit f4eb54529bb3664c3a562e488b460fe075f79d67
52748 Author: Wolfgang Denk <wd@pollux.denx.de>
52749 Date: Sun Jan 7 00:13:11 2007 +0100
52751 Prepare for release 1.2.0
52753 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
52754 Author: Stefan Roese <sr@denx.de>
52755 Date: Sat Jan 6 15:58:09 2007 +0100
52757 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
52759 This patch fixes a problem with an incorrect setup for the refresh
52760 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
52762 Signed-off-by: Stefan Roese <sr@denx.de>
52764 commit f16c1da9577f06c5fc08651a4065537407de4635
52765 Author: Stefan Roese <sr@denx.de>
52766 Date: Sat Jan 6 15:56:13 2007 +0100
52768 [PATCH] Update ALPR board files
52770 This update brings the ALPR board support to the newest version.
52771 It also fixes a problem with the NAND driver.
52773 Signed-off-by: Stefan Roese <sr@denx.de>
52775 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
52776 Author: Stefan Roese <sr@denx.de>
52777 Date: Fri Jan 5 11:46:05 2007 +0100
52779 [PATCH] nand: Fix problem with oobsize calculation
52781 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
52783 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
52784 returns a 0x15. In the code fragment below bits [1:0] determine the
52785 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
52786 next field is also ANDed with 0x3. However this is a one bit field
52787 as defined in the Hynix and Samsung parts in the 4th ID byte that
52788 determins the oobsize, not a two bit field. It works on Samsung as
52789 bits[3:2] are 01. However for the Hynix there is a 11 in these two
52790 bits, so the oob size gets messed up.
52792 I checked the correct linux code and the suggested fix from Brian is
52793 also available in the linux nand mtd driver.
52795 Signed-off-by: Stefan Roese <sr@denx.de>
52797 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
52798 Author: Stefan Roese <sr@denx.de>
52799 Date: Fri Jan 5 10:40:36 2007 +0100
52801 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
52803 This fix will make the MAL burst disabling patch for the Linux
52804 EMAC driver obsolete.
52806 Signed-off-by: Stefan Roese <sr@denx.de>
52808 commit 023889838282b6237b401664f22dd22dfba2c066
52809 Author: Stefan Roese <sr@denx.de>
52810 Date: Fri Jan 5 10:38:05 2007 +0100
52812 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
52814 This code will optimize the DDR2 controller setup on a board specific
52817 Note: This code doesn't work right now on the NAND booting image for the
52818 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
52820 Signed-off-by: Stefan Roese <sr@denx.de>
52822 commit cce4acbb68398634b8d011ed7bb0d12269c84230
52823 Author: Bartlomiej Sieka <tur@semihalf.com>
52824 Date: Thu Dec 28 19:08:21 2006 +0100
52827 - fix a typo in V38B config file
52828 - move watchdog initialisation earlier in the boot process
52829 - add "wdt=off" to default kernel command line (disables kernel watchdog)
52831 commit 92eb729bad876725aeea908d2addba0800620840
52832 Author: Wolfgang Denk <wd@pollux.denx.de>
52833 Date: Wed Dec 27 01:26:13 2006 +0100
52835 Fix bug in adaption of Stefano Babic's CFI driver patch.
52837 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
52838 Author: Wolfgang Denk <wd@pollux.denx.de>
52839 Date: Sun Dec 24 01:42:57 2006 +0100
52841 Minor code cleanup.
52843 commit d784fdb05900ada3686d5778783e1fb328e9fb66
52844 Author: Stefano Babic <sbabic@denx.de>
52845 Date: Tue Dec 12 00:22:42 2006 +0100
52847 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
52849 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
52850 Author: Stefan Roese <sr@denx.de>
52851 Date: Fri Dec 22 14:29:40 2006 +0100
52853 [PATCH] Fix sequoia flash autodetection (finally correct)
52855 Now 32MByte and 64MByte FLASH is know to work and other
52856 configurations should work too.
52858 Signed-off-by: Stefan Roese <sr@denx.de>
52860 commit 82e5236a8b719543643fd26d5827938ab2b94818
52861 Author: Wolfgang Denk <wd@pollux.denx.de>
52862 Date: Fri Dec 22 10:30:26 2006 +0100
52864 Minor code cleanup; update CHANGELOG.
52866 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
52867 Author: Heiko Schocher <hs@pollux.denx.de>
52868 Date: Thu Dec 21 17:17:02 2006 +0100
52870 Added support for the TQM8272 board from TQ
52872 Signed-off-by: Heiko Schocher <hs@denx.de>
52874 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
52875 Author: Heiko Schocher <hs@pollux.denx.de>
52876 Date: Thu Dec 21 16:14:48 2006 +0100
52878 [PATCH] Add support for the UC101 board from MAN.
52880 Signed-off-by: Heiko Schocher <hs@denx.de>
52882 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
52883 Author: Bartlomiej Sieka <tur@semihalf.com>
52884 Date: Wed Dec 20 00:29:43 2006 +0100
52886 Fix to make the baudrate changes immediate for the MCF52x2 family.
52888 commit daa6e418bcc0c717752e8de939c213c790286096
52889 Author: Bartlomiej Sieka <tur@semihalf.com>
52890 Date: Wed Dec 20 00:27:32 2006 +0100
52892 Preliminary support for the iDMR board (ColdFire).
52894 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
52895 Author: Andrei Safronov <safronov@pollux.denx.de>
52896 Date: Fri Dec 8 16:23:08 2006 +0100
52898 automatic update mechanism
52900 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
52901 Author: roy zang <tie-fei.zang@freescale.com>
52902 Date: Mon Dec 4 17:56:59 2006 +0800
52904 Slight code clean up.
52905 Add comments, delete duplicate define and remove spaces.
52906 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
52908 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
52909 Author: roy zang <tie-fei.zang@freescale.com>
52910 Date: Mon Dec 4 17:54:21 2006 +0800
52912 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
52913 multiplier table can not refect the real PLL clock behavior of these
52914 processors. Please refer to the hardware specification for detailed
52915 information of the corresponding processors.
52916 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
52918 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
52919 Author: roy zang <tie-fei.zang@freescale.com>
52920 Date: Mon Dec 4 14:46:23 2006 +0800
52922 Remove the static MAC address, ip address, server ip, netmask and
52923 gateway ip for network setting.
52924 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
52926 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
52927 Author: roy zang <tie-fei.zang@freescale.com>
52928 Date: Mon Dec 4 14:33:08 2006 +0800
52930 Remove the duplicate memory test code for mpc744ihpc2 board.
52931 If a memory test is needed, please use the functions in
52932 post/memory.c or memtest command.
52933 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
52935 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
52936 Author: roy zang <tie-fei.zang@freescale.com>
52937 Date: Fri Dec 1 19:01:25 2006 +0800
52939 Fix the exception occuring in RAM table search issue.
52940 The original search_one_table() function code can only processes the search
52941 for the exception occurring in FLASH/ROM, because the exception and fixup
52942 table usually locate in FLASH. If the exception address is also in
52943 FLASH, it will be OK.
52944 If the exception occurs in RAM, after the u-boot relocation, a
52945 relocation offset should be added.
52947 clean up the code in cpu/74xx_7xx/cpu.c
52949 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
52951 commit ee311214e0d216f904feea269599d0934bf71f23
52952 Author: roy zang <tie-fei.zang@freescale.com>
52953 Date: Fri Dec 1 11:47:36 2006 +0800
52955 Clean up the code according to codestyle:
52956 (1) remove some C++ comments.
52957 (2) remove trailing white space.
52958 (3) remove trailing empty line.
52959 (4) Indentation by table.
52960 (5) remove {} in one line condition.
52961 (6) add space before '(' in function call.
52962 Remove some weird printf () output.
52963 Add necessary comments.
52964 Modified Makefile to support building in a separate directory.
52966 commit dd520bf314c7add4183c5191692180f576f96b60
52967 Author: Wolfgang Denk <wd@pollux.denx.de>
52968 Date: Thu Nov 30 18:02:20 2006 +0100
52972 commit 8d9a8610b8256331132227e9e6585c6bd5742787
52973 Author: Wolfgang Denk <wd@pollux.denx.de>
52974 Date: Thu Nov 30 01:54:07 2006 +0100
52976 Code cleanup. Update CHANGELOG.
52978 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
52979 Author: Grant Likely <grant.likely@secretlab.ca>
52980 Date: Wed Nov 29 16:23:42 2006 +0100
52982 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
52984 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
52985 not the XLB frequency.
52987 This patch depends on the previous patches for MPC52xx device tree support
52989 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52990 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
52992 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
52993 Author: Stefan Roese <sr@denx.de>
52994 Date: Wed Nov 29 15:42:37 2006 +0100
52996 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
52998 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
52999 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
53000 quite similar and share the same board directory "prodrive/p3mx"
53001 and the same config file "p3mx.h".
53003 Signed-off-by: Stefan Roese <sr@denx.de>
53005 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
53006 Author: Stefan Roese <sr@denx.de>
53007 Date: Wed Nov 29 12:53:15 2006 +0100
53009 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
53011 In the bootvx command the load address was only read from the env
53012 variable "loadaddr" and not optionally passed as paramter as described
53013 in the help. This is fixed with this patch. The behaviour is now the
53014 same as in the bootelf command.
53016 Signed-off-by: Stefan Roese <sr@denx.de>
53018 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
53019 Author: Stefan Roese <sr@denx.de>
53020 Date: Wed Nov 29 12:03:57 2006 +0100
53022 [PATCH] include/ppc440.h minor error affecting interrupts
53024 Fixed include/ppc440.c for UIC address Bug
53026 Corrects bug affecting the addresses for the universal interrupt
53027 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
53029 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
53030 Signed-off-by: Stefan Roese <sr@denx.de>
53032 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
53033 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
53034 Date: Tue Nov 28 16:17:27 2006 -0600
53036 Make fsl-i2c not conflict with SOFT I2C
53038 Signed-off-by: Timur Tabi <timur@freescale.com>
53040 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
53041 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
53042 Date: Tue Nov 28 16:17:18 2006 -0600
53044 Fix I2C master address initialization.
53046 Signed-off-by: Timur Tabi <timur@freescale.com>
53048 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
53049 Author: Kim Phillips <kim.phillips@freescale.com>
53050 Date: Tue Nov 28 23:31:19 2006 -0600
53052 Assign maintainers for mpc8349emds and mpc8360emds
53054 Dave for mpc8360emds, and me for mpc8349emds.
53056 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
53057 Author: Kim Phillips <kim.phillips@freescale.com>
53058 Date: Tue Nov 28 23:28:33 2006 -0600
53060 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
53062 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
53063 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
53065 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
53066 Author: Timur Tabi <timur@freescale.com>
53067 Date: Tue Nov 28 12:09:35 2006 -0600
53069 mpc83xx: Miscellaneous code style fixes
53071 Implement various code style fixes and similar changes.
53073 Signed-off-by: Timur Tabi <timur@freescale.com>
53075 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
53076 Author: Stefan Roese <sr@denx.de>
53077 Date: Tue Nov 28 17:55:49 2006 +0100
53079 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
53081 This patch adds the code and configuration necessary to boot with an
53082 arch/powerpc Linux kernel.
53084 Signed-off-by: Grant Likely <grant.likely@gmail.com>
53085 Acked-by: Jon Loeliger <jdl@freescale.com>
53087 commit e732faec95a83cb468b4850ae807c8301dde8f6a
53088 Author: Stefan Roese <sr@denx.de>
53089 Date: Tue Nov 28 16:09:24 2006 +0100
53091 [PATCH] PPC4xx: 440SP Rev. C detection added
53093 Signed-off-by: Stefan Roese <sr@denx.de>
53095 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
53096 Author: Stefan Roese <sr@denx.de>
53097 Date: Tue Nov 28 11:04:45 2006 +0100
53099 [PATCH] nand: Fix patch merge problem
53101 Signed-off-by: Stefan Roese <sr@denx.de>
53103 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
53104 Author: Stefan Roese <sr@denx.de>
53105 Date: Tue Nov 28 11:04:45 2006 +0100
53107 [PATCH] nand: Fix patch merge problem
53109 Signed-off-by: Stefan Roese <sr@denx.de>
53111 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
53112 Author: Wolfgang Denk <wd@pollux.denx.de>
53113 Date: Mon Nov 27 22:53:53 2006 +0100
53117 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
53118 Author: Stefan Roese <sr@denx.de>
53119 Date: Mon Nov 27 17:43:25 2006 +0100
53121 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
53123 Patch below corrects the setting of the zmiifer register, it was
53124 overwritting the register rather than ORing the settings.
53126 Signed-off-by: Neil Wilson <NWilson@airspan.com>
53127 Signed-off-by: Stefan Roese <sr@denx.de>
53129 commit d1a72545296800b7e219f93104ad5836f0003d66
53130 Author: Stefan Roese <sr@denx.de>
53131 Date: Mon Nov 27 17:34:10 2006 +0100
53133 [PATCH] Select NAND embedded environment from board configuration
53135 The current NAND Bootloader setup forces the environment
53136 variables to be in line with the bootloader. This change
53137 enables the configuration to be made in the board include
53138 file instead so that it can be individually enabled.
53140 Signed-off-by: Nick Spence <nick.spence@freescale.com>
53141 Signed-off-by: Stefan Roese <sr@denx.de>
53143 commit 15784862857c3c2214498defcfed84ff137fb81e
53144 Author: Stefan Roese <sr@denx.de>
53145 Date: Mon Nov 27 17:22:19 2006 +0100
53147 [PATCH] nand_wait() timeout fixes
53149 Two fixes for the nand_wait() function in
53150 drivers/nand/nand_base.c:
53152 1. Use correct timeouts. The original timeouts in Linux
53153 source are 400ms and 20ms not 40s and 20s
53155 2. Return correct error value in case of timeout. 0 is
53158 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
53159 Signed-off-by: Stefan Roese <sr@denx.de>
53161 commit da5553b095bf04f4f109ad7e565dae3aba47b230
53162 Author: Stefan Roese <sr@denx.de>
53163 Date: Mon Nov 27 17:04:06 2006 +0100
53165 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
53167 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
53168 arguments to bootm. It removes the getenv("disable_of") test that used
53169 to be used for this purpose.
53171 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
53172 Acked-by: Jon Loeliger <jdl@freescale.com>
53174 commit a9398e018593782c5fa7d0741955fc1256b34c1e
53175 Author: Wolfgang Denk <wd@pollux.denx.de>
53176 Date: Mon Nov 27 15:32:42 2006 +0100
53178 Minor code cleanup. Update CHANGELOG.
53180 commit 1729b92cde575476684bffe819d0b7791b57bff2
53181 Author: Stefan Roese <sr@denx.de>
53182 Date: Mon Nov 27 14:52:04 2006 +0100
53184 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
53186 Signed-off-by: Stefan Roese <sr@denx.de>
53188 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
53189 Author: Stefan Roese <sr@denx.de>
53190 Date: Mon Nov 27 14:49:51 2006 +0100
53192 [PATCH] alpr: remove unused board specific flash driver
53194 Signed-off-by: Stefan Roese <sr@denx.de>
53196 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
53197 Author: Stefan Roese <sr@denx.de>
53198 Date: Mon Nov 27 14:48:41 2006 +0100
53200 [PATCH] 4xx: Fix problem with board specific reset code
53202 Signed-off-by: Stefan Roese <sr@denx.de>
53204 commit ec0c2ec725aec9524a177a77ce75559e644a931a
53205 Author: Stefan Roese <sr@denx.de>
53206 Date: Mon Nov 27 14:46:06 2006 +0100
53208 [PATCH] Remove testing 4xx enet PHY setup
53210 Signed-off-by: Stefan Roese <sr@denx.de>
53212 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
53213 Author: Stefan Roese <sr@denx.de>
53214 Date: Mon Nov 27 14:12:17 2006 +0100
53216 [PATCH] Update Prodrive ALPR board support (440GX)
53218 Signed-off-by: Stefan Roese <sr@denx.de>
53220 commit 58b485776698c3d71ec5a215e392123b4c15afa3
53221 Author: Markus Klotzbuecher <mk@denx.de>
53222 Date: Mon Nov 27 11:51:21 2006 +0100
53224 Add a small README with information on the generic ohci driver.
53226 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
53227 Author: Markus Klotzbuecher <mk@denx.de>
53228 Date: Mon Nov 27 11:46:46 2006 +0100
53230 Fix some endianness issues related to the generic ohci driver
53232 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
53233 Author: Markus Klotzbuecher <mk@denx.de>
53234 Date: Mon Nov 27 11:44:58 2006 +0100
53236 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
53237 to choose between the old and the generic OHCI drivers.
53239 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
53240 Author: Markus Klotzbuecher <mk@denx.de>
53241 Date: Mon Nov 27 11:43:09 2006 +0100
53243 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
53244 and adapted board configs TQM5200 and yosemite accordingly. This commit
53245 also makes the maximum number of root hub ports configurable
53246 (CFG_USB_OHCI_MAX_ROOT_PORTS).
53248 commit 78d620ebb5871d252270dedfad60c6568993b780
53249 Author: Wolfgang Denk <wd@atlas.denx.de>
53250 Date: Thu Nov 23 22:58:58 2006 +0100
53252 Updates for TQM5200 modules:
53253 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
53254 - simplify "udate" definitions
53256 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
53257 Author: Stefan Roese <sr@denx.de>
53258 Date: Wed Nov 22 13:20:50 2006 +0100
53260 [PATCH] PPC4xx start.S: Fix for processor errata
53262 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
53263 errata 1.12: 440_33 by moving patch up in code.
53265 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
53266 Signed-off-by: Stefan Roese <sr@denx.de>
53268 commit 4ef6251403f637841000e0fef9e832aa01339822
53269 Author: Stefan Roese <sr@denx.de>
53270 Date: Mon Nov 20 20:39:52 2006 +0100
53272 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
53274 Signed-off-by: Stefan Roese <sr@denx.de>
53276 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
53277 Author: Wolfgang Denk <wd@pollux.denx.de>
53278 Date: Mon Nov 20 10:28:30 2006 +0100
53282 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
53283 Author: Stefan Roese <sr@denx.de>
53284 Date: Mon Nov 13 13:55:24 2006 +0100
53286 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
53288 * Adds support for AMD command set Top Boot flash geometry reversal
53289 * Adds support for reading JEDEC Manufacturer ID and Device ID
53290 * Adds support for displaying command set, manufacturer id and
53291 device ids (flinfo)
53292 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
53293 * Removes outdated change history (refer to git log instead)
53295 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
53296 Signed-off-by: Stefan Roese <sr@denx.de>
53298 commit b21b511d4c50408f4853f46f06b601272196223f
53299 Author: Wolfgang Denk <wd@pollux.denx.de>
53300 Date: Sun Nov 12 21:13:23 2006 +0100
53304 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
53305 Author: Bartlomiej Sieka <tur@semihalf.com>
53306 Date: Sat Nov 11 22:48:22 2006 +0100
53308 Disable the watchdog in the default config for the V38B board.
53310 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
53311 Author: Bartlomiej Sieka <tur@semihalf.com>
53312 Date: Sat Nov 11 22:43:00 2006 +0100
53314 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
53315 group is enabled for USB earlier (in cpu_init_f() instead of
53316 usb_lowlevel_init()).
53318 commit 91650b3e4de688038d4f71279c44858e3e2c6870
53319 Author: Wolfgang Denk <wd@pollux.denx.de>
53320 Date: Mon Nov 6 17:06:36 2006 +0100
53322 Sequential accesses to non-existent memory must be synchronized,
53323 at least on G2 cores.
53325 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
53327 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
53328 Author: Timur Tabi <timur@freescale.com>
53329 Date: Fri Nov 3 19:15:00 2006 -0600
53331 mpc83xx: Update 83xx to use fsl_i2c.c
53333 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
53334 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
53335 Added multiple I2C bus support to fsl_i2c.c.
53337 Signed-off-by: Timur Tabi <timur@freescale.com>
53339 commit d239d74b1c937984bc519083a8e7de373a390f06
53340 Author: Timur Tabi <timur@freescale.com>
53341 Date: Fri Nov 3 12:00:28 2006 -0600
53343 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
53345 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
53346 tree matches the other 8xxx trees.
53348 Signed-off-by: Timur Tabi <timur@freescale.com>
53350 commit f7fb2e703ec9688541416962724adff70a7322cb
53351 Author: Kim Phillips <kim.phillips@freescale.com>
53352 Date: Thu Nov 2 19:47:11 2006 -0600
53354 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
53356 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
53357 Author: Dave Liu <daveliu@freescale.com>
53358 Date: Thu Nov 2 18:05:50 2006 -0600
53360 mpc83xx: Fix the incorrect dcbz operation
53362 The 834x rev1.x silicon has one CPU5 errata.
53364 The issue is when the data cache locked with
53365 HID0[DLOCK], the dcbz instruction looks like no-op inst.
53367 The right behavior of the data cache is when the data cache
53368 Locked with HID0[DLOCK], the dcbz instruction allocates
53371 The 834x rev3.0 and later and 8360 have not this bug inside.
53373 So, when 834x rev3.0/8360 are working with ECC, the dcbz
53374 instruction will corrupt the stack in cache, the processor will
53377 However, the 834x rev1.x can work with ECC with these code,
53378 because the sillicon has this cache bug. The dcbz will not
53379 corrupt the stack in cache.
53380 Really, it is the fault code running on fault sillicon.
53382 This patch fix the incorrect dcbz operation. Instead of
53383 CPU FP writing to initialise the ECC.
53386 * Fix the incorrect dcbz operation instead of CPU FP
53387 writing to initialise the ECC memory. Otherwise, it
53388 will corrupt the stack in cache, The processor will checkstop
53391 Signed-off-by: Dave Liu <daveliu@freescale.com>
53393 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
53394 Author: Kim Phillips <kim.phillips@freescale.com>
53395 Date: Wed Nov 1 00:10:40 2006 -0600
53397 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
53399 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
53400 STDOUT_PATH configuration bits to mpc8349emds,
53401 mpc8349itx, and mpc8360emds board code.
53403 redo environment to use bootm with the fdtaddr
53404 for booting ARCH=powerpc kernels by default,
53405 and provide default fdtaddr values.
53407 commit 48041365b3420589ad464ebc7752e0053538b729
53408 Author: Kim Phillips <kim.phillips@freescale.com>
53409 Date: Wed Nov 1 00:07:25 2006 -0600
53411 mpc83xx: change ft code to modify local-mac-address property
53413 Update 83xx OF code to update local-mac-address properties
53414 for ethernet instead of the obsolete 'address' property.
53416 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
53417 Author: Timur Tabi <timur@freescale.com>
53418 Date: Tue Oct 31 21:23:16 2006 -0600
53420 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
53422 This patch also adds an improved I2C set_speed(), which handles all clock
53425 Signed-off-by: Timur Tabi <timur@freescale.com>
53427 commit ac4b5622ce050b5ee1e154b98df630d778661632
53428 Author: Dave Liu <daveliu@freescale.com>
53429 Date: Tue Oct 31 19:54:59 2006 -0600
53431 mpc83xx: add the README.mpc8360emds
53433 add doc/README.mpc8360emds to accompany the new board support
53435 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
53436 Author: Dave Liu <daveliu@freescale.com>
53437 Date: Fri Nov 3 12:11:15 2006 -0600
53439 mpc83xx: add QE ethernet support
53441 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
53443 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
53444 Author: Dave Liu <daveliu@freescale.com>
53445 Date: Fri Nov 3 19:33:44 2006 -0600
53447 mpc83xx: Add MPC8360EMDS basic board support
53449 Add support for the Freescale MPC8360EMDS board.
53450 Includes DDR, DUART, Local Bus, PCI.
53452 commit 23892e49352de74f7fac36ff90bb1be143d195e3
53453 Author: Dave Liu <daveliu@freescale.com>
53454 Date: Tue Oct 31 19:30:40 2006 -0600
53456 mpc83xx: add the QUICC Engine (QE) immap file
53458 common QE immap file. Also required for 8360.
53460 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
53461 Author: Dave Liu <daveliu@freescale.com>
53462 Date: Tue Oct 31 19:25:38 2006 -0600
53464 mpc83xx: Add 8360 specifics to 83xx immap
53466 Mainly add QE device dependencies, with appropriate 8360 protection.
53469 commit 988833324a7fda482c8ac3ca23eb539f8232e404
53470 Author: Timur Tabi <timur@freescale.com>
53471 Date: Tue Oct 31 19:14:41 2006 -0600
53473 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
53475 PREREQUISITE PATCHES:
53477 * This patch can only be applied after the following patches have been applied:
53479 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
53480 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
53484 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
53485 the clock for the 2nd USB board (Linux kernel will hang otherwise),
53486 and fix the CONFIG_BOOTARGS macro.
53488 Signed-off-by: Timur Tabi <timur@freescale.com>
53490 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
53491 Author: Timur Tabi <timur@freescale.com>
53492 Date: Tue Oct 31 18:44:42 2006 -0600
53494 mpc83xx: Add support for the MPC8349E-mITX
53496 PREREQUISITE PATCHES:
53498 * This patch can only be applied after the following patches have been applied:
53500 1) DNX#2006090742000024 "Add support for multiple I2C buses"
53501 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
53502 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
53503 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
53504 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
53508 * Add support for the Freescale MPC8349E-mITX reference design platform.
53509 The second TSEC (Vitesse 7385 switch) is not supported at this time.
53511 Signed-off-by: Timur Tabi <timur@freescale.com>
53513 commit 183da6d9b446cc12123455844ad1187e2375626f
53514 Author: Ben Warren <bwarren@qstreams.com>
53515 Date: Tue Sep 12 10:15:53 2006 -0400
53517 Additional MPC8349 support for multibus i2c
53521 Here is a patch for a file that was accidentally left out of a previous
53524 It accompanies the patch with ticket DNX#2006090742000024
53527 Change PCI initialization to use new multi-bus I2C API.
53532 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
53533 Author: Ben Warren <bwarren@qstreams.com>
53534 Date: Thu Sep 7 16:51:04 2006 -0400
53536 Multi-bus I2C implementation of MPC834x
53540 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
53541 family and the MPC8349EMDS board in particular.
53542 This patch requires Patch 1 (Add support for multiple I2C buses).
53543 Testing was performed on a 533MHz board.
53545 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
53547 Signed-off-by: Ben Warren <bwarren@qstreams.com>
53550 Implemented driver-level code to support two I2C buses on the
53551 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
53552 are 50kHz, 100kHz and 400kHz on each bus.
53557 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
53558 Author: Ben Warren <bwarren@qstreams.com>
53559 Date: Thu Sep 7 16:50:54 2006 -0400
53561 Add support for multiple I2C buses
53565 Attached is a patch providing support for multiple I2C buses at the
53566 command level. The second part of the patch includes an implementation
53567 for the MPC834x CPU and MPC8349EMDS board.
53569 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
53571 Signed-off-by: Ben Warren <bwarren@qstreams.com>
53575 1. Include new 'i2c' command (based on USB implementation) using
53576 CONFIG_I2C_CMD_TREE.
53578 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
53579 the commands to change bus number and speed are only available under the
53580 new 'i2c' command mentioned in the first bullet.
53582 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
53583 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
53584 of an array of bus-device pairs. Otherwise, it is an array of uchar.
53587 Added new 'i2c' master command for all I2C interaction. This is
53588 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
53589 setting I2C bus speed as well as changing the active bus if the board
53590 has more than one (conditionally compiled with
53591 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
53597 commit bed85caf872714ebf53013967a695c9d63acfc68
53598 Author: Timur Tabi <timur@freescale.com>
53599 Date: Tue Oct 31 18:13:36 2006 -0600
53601 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
53605 * Errata DDR6, which affects all current MPC 834x processors, lists changes
53606 required to maintain compatibility with various types of DDR memory. This
53607 patch implements those changes.
53609 Signed-off-by: Timur Tabi <timur@freescale.com>
53611 commit afd6e470f639883002c7c59d562690a5cb0f4865
53612 Author: Timur Tabi <timur@freescale.com>
53613 Date: Wed Oct 25 18:45:23 2006 -0500
53615 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
53617 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
53618 Author: Timur Tabi <timur@freescale.com>
53619 Date: Tue Aug 22 17:07:00 2006 -0500
53621 mpc83xx: Add support for variable flash memory sizes on 83xx systems
53625 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
53626 window registers, instead of using a hard-coded value of 8MB.
53628 Signed-off-by: Timur Tabi <timur@freescale.com>
53630 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
53631 Author: Tanya Jiang <tanya.jiang@freescale.com>
53632 Date: Thu Aug 3 18:38:13 2006 +0800
53634 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
53636 Unified TQM834x variable names with 83xx and consolidated macro
53637 in preparation for the 8360 and other upcoming 83xx devices.
53639 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
53641 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
53642 Author: Dave Liu <daveliu@freescale.com>
53643 Date: Wed Oct 25 14:41:21 2006 -0500
53645 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
53647 Incorporated the common unified variable names and the changes in preparation
53648 for releasing mpc8360 patches.
53650 Signed-off-by: Dave Liu <daveliu@freescale.com>
53652 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
53653 Author: Tanya Jiang <tanya.jiang@freescale.com>
53654 Date: Thu Aug 3 18:36:02 2006 +0800
53656 mpc83xx: Fix missing build for mpc8349emds pci.c
53658 Make pci build for mpc8349emds
53660 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
53662 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
53663 Author: Tanya Jiang <tanya.jiang@freescale.com>
53664 Date: Thu Aug 3 18:39:49 2006 +0800
53666 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
53668 Removed unused file resetvec.S for mpc83xx cpu
53670 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
53672 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
53673 Author: Nick Spence <Nick.Spence@freescale.com>
53674 Date: Sat Sep 30 00:32:59 2006 -0700
53676 NAND Flash verify across block boundaries
53678 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
53680 and the write crosses a block boundary. The pointer to the verification
53681 buffer (bufstart) is not being updated to reflect the starting of the
53683 block so the verification of the second block fails.
53687 * Fix NAND FLASH page verification across block boundaries
53689 commit f484dc791a3932537213c43c654cc1295c64b84c
53690 Author: Nick Spence <nick.spence@freescale.com>
53691 Date: Thu Sep 7 07:39:46 2006 -0700
53693 Added RGMII support to the TSECs and Marvell 881111 Phy
53695 Added a phy initialization to adjust the RGMII RX and TX timing
53696 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
53698 Signed-off-by: Nick Spence <nick.spence@freescale.com>
53700 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
53701 Author: roy zang <tie-fei.zang@freescale.com>
53702 Date: Fri Nov 3 13:10:00 2006 +0800
53704 Remove some unused CFG define.
53705 undef CFG_DRAM_TEST
53707 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
53708 Author: roy zang <tie-fei.zang@freescale.com>
53709 Date: Fri Nov 3 13:07:36 2006 +0800
53711 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
53712 Both work. 0xFF000000 seems more reasonable.
53714 commit c59200443072353044aa4bf737a5a60f9a9af231
53715 Author: Wolfgang Denk <wd@pollux.denx.de>
53716 Date: Thu Nov 2 15:15:01 2006 +0100
53718 Release U-Boot 1.1.6
53720 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
53721 Author: roy zang <tie-fei.zang@freescale.com>
53722 Date: Thu Nov 2 19:14:48 2006 +0800
53724 This patch comes from Yuli's posted patch on 8/8/2006
53725 titled "CFI Driver Little-Endian write Issue".
53727 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
53729 If that patch applied, please discard this one.
53730 Until now , I do not see his patch is applied. So please apply this one.
53732 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
53733 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53735 commit b825f158e449e1e9cf74c08e572955e122394c96
53736 Author: roy zang <tie-fei.zang@freescale.com>
53737 Date: Thu Nov 2 19:12:31 2006 +0800
53739 Tsi108 on chip i2c support.
53741 The i2c Interface provides a master-only, serial interface that can be
53742 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
53745 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53746 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53748 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
53749 Author: roy zang <tie-fei.zang@freescale.com>
53750 Date: Thu Nov 2 19:11:06 2006 +0800
53752 Tsi108 on chip pci controller support.
53754 If there is no pci card, the tsi108/109 pci configure read will
53755 cause a machine check exception to the processor. PCI error should
53756 also be cleared after the read.
53758 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53759 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53761 commit d1927cee977126e547ceeba23e4f978f377cfb8f
53762 Author: roy zang <tie-fei.zang@freescale.com>
53763 Date: Thu Nov 2 19:08:55 2006 +0800
53765 Tundra tsi108 on chip Ethernet controller support.
53767 The following is a brief description of the Ethernet controller:
53768 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
53769 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
53770 to manage the two physical connection devices (PHYs). Each Ethernet port
53771 has its own statistics monitor that tracks and reports key interface
53772 statistics. Each port supports a 256-entry hash table for address
53773 filtering. In addition, each port is bridged to the Switch Fabric
53774 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
53776 Each Ethernet port also has a pair of internal Ethernet DMA channels to
53777 support the transmit and receive data flows. The Ethernet DMA channels
53778 use descriptors set up in memory, the memory map of the device, and
53779 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
53780 handles arbitration for the Switch Fabric. The Controller also
53781 has a register businterface for register accesses and status monitor
53784 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
53785 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
53786 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
53787 data flows to and from the Ethernet Controller through the Switch Fabric.
53789 Each Ethernet port uses its transmit and receive DMA channels to manage
53790 data flows through buffer descriptors that are predefined by the
53791 system (the descriptors can exist anywhere in the system memory map).
53792 These descriptors are data structures that point to buffers filled
53793 with data ready to transmit over Ethernet, or they point to empty
53794 buffers ready to receive data from Ethernet.
53796 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53797 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53799 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
53800 Author: roy zang <tie-fei.zang@freescale.com>
53801 Date: Thu Nov 2 19:01:33 2006 +0800
53803 Tundra tsi108 header file.
53805 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
53806 PowerPC processors that offers numerous system interconnect options for
53807 embedded application designers. The Tsi108 can interconnect 60x or
53808 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
53809 and Flash. Provided the macro define for tsi108 chip.
53811 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53812 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53814 commit 87c4db09699c6b89176b31004afcb83eb1585d47
53815 Author: roy zang <tie-fei.zang@freescale.com>
53816 Date: Thu Nov 2 18:59:15 2006 +0800
53818 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
53819 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
53821 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53822 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53824 commit 27801b8ab11c61b577e45742a515bb3b23b80241
53825 Author: roy zang <tie-fei.zang@freescale.com>
53826 Date: Thu Nov 2 18:57:21 2006 +0800
53828 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
53829 Make ,config.mk and link file for the mpc7448hpc2 board.
53831 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53832 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53834 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
53835 Author: roy zang <tie-fei.zang@freescale.com>
53836 Date: Thu Nov 2 18:55:04 2006 +0800
53838 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
53839 The mpc7448hpc2 board support header file.
53841 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53842 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53844 commit 625bb5ddb50b243f931262ca8c46956409471917
53845 Author: roy zang <tie-fei.zang@freescale.com>
53846 Date: Thu Nov 2 18:52:21 2006 +0800
53848 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
53849 The mpc7448hpc2 board support low level assemble language init code.
53851 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53852 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53854 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
53855 Author: roy zang <tie-fei.zang@freescale.com>
53856 Date: Thu Nov 2 18:49:51 2006 +0800
53858 General code modification for mpc7448hpc2 board support.
53859 1. Add 7447A and 7448 processor support.
53860 2. Add the following flags.
53862 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
53863 (such as by switch on board), this flag should be set.
53865 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
53866 relocates to RAM, this flag should be set.
53868 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
53869 system hang in exception, this flag should be set.
53871 There is a design issue for tsi108/109 pci configure read. When pci scan
53872 the slots, if there is no pci card, the tsi108/9 will cause a machine
53873 check exception for mpc7448 processor.
53875 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
53876 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53878 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
53879 Author: roy zang <tie-fei.zang@freescale.com>
53880 Date: Thu Nov 2 18:34:47 2006 +0800
53882 Add README file for mpc7448hpc2 board.
53883 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53885 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
53886 Author: Bartlomiej Sieka <tur@semihalf.com>
53887 Date: Wed Nov 1 02:04:38 2006 +0100
53889 Finish up support for MarelV38B board
53890 - add watchdog support
53891 - enable GPIO_WKUP_7 pin for input
53894 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
53895 Author: Bartlomiej Sieka <tur@semihalf.com>
53896 Date: Wed Nov 1 01:45:46 2006 +0100
53898 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
53899 * remove warnings when compiling ethaddr.c
53900 * adjust linker script (fixes a crash resulting from incorrect
53901 definition of __u_boot_cmd_start)
53902 - Some MarelV38B code cleanup.
53904 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
53905 Author: Bartlomiej Sieka <tur@semihalf.com>
53906 Date: Wed Nov 1 01:38:16 2006 +0100
53908 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
53909 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
53910 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
53911 MPC5XXX_WU_GPIO_DATA_O for affected boards.
53913 - Add defintions for some MPC5XXX GPIO pins.
53915 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
53916 Author: Bartlomiej Sieka <tur@semihalf.com>
53917 Date: Wed Nov 1 01:34:29 2006 +0100
53919 Changed MarelV38B board make target to lowercase. Config file cleanup.
53921 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
53922 Author: Wolfgang Denk <wd@pollux.denx.de>
53923 Date: Sun Oct 29 01:03:51 2006 +0200
53925 Automatically adjust ARFLAGS so "make -s" is really silent.
53927 commit fae684e89844856383bdf101440889557df3e6b1
53928 Author: Stefan Roese <sr@denx.de>
53929 Date: Sat Oct 28 16:45:00 2006 +0200
53931 [PATCH] omap925.c: Remove unused functions
53933 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
53934 Signed-off-by: Stefan Roese <sr@denx.de>
53936 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
53937 Author: Stefan Roese <sr@denx.de>
53938 Date: Sat Oct 28 17:12:58 2006 +0200
53940 [PATCH] Add some missing machtypes for netstar & voiceblue boards
53942 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
53945 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
53946 Signed-off-by: Stefan Roese <sr@denx.de>
53948 commit 856f054410cef52d868feb330168b2a4c4091328
53949 Author: Stefan Roese <sr@denx.de>
53950 Date: Sat Oct 28 15:55:52 2006 +0200
53952 [PATCH] NAND: Partition name support added to NAND subsystem
53954 chpart, nboot and NAND subsystem related commands now accept also partition
53955 name to specify offset.
53957 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
53958 Signed-off-by: Stefan Roese <sr@denx.de>
53960 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
53961 Author: Wolfgang Denk <wd@pollux.denx.de>
53962 Date: Sat Oct 28 02:29:44 2006 +0200
53966 commit 2751a95abd1b96911081c357e96a12fa97b40dee
53967 Author: Wolfgang Denk <wd@pollux.denx.de>
53968 Date: Sat Oct 28 02:29:14 2006 +0200
53970 Enable commandline editing and hush shell on all TQM boards.
53972 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
53973 Author: Wolfgang Denk <wd@pollux.denx.de>
53974 Date: Sat Oct 28 02:28:02 2006 +0200
53976 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
53978 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
53979 Author: Wolfgang Denk <wd@denx.de>
53980 Date: Sat Oct 28 01:14:32 2006 +0200
53982 Check for illegal character '=' in environment variable names.
53984 Make sure the string passed as variable name does not contain a '='
53985 character. This not only prevents the common error or typing
53986 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
53987 also closes a backdoor which allowed to delete write-protected
53988 environment variables, for example by using "setenv ethaddr=".
53990 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
53991 Author: Wolfgang Denk <wd@pollux.denx.de>
53992 Date: Sat Oct 28 00:38:39 2006 +0200
53994 Minor code cleanup.
53996 commit e11887a77d81077416a2d1c5e0354916fee8c034
53997 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
53998 Date: Thu Oct 26 17:55:31 2006 +0200
54000 Don't pass any debug options directly to the assembler
54002 When passing the -g option to gcc, gcc automatically selects a
54003 suitable --g<format> option to pass on to the assembler.
54004 Thus, there's no point in forcing a specific debug option on the
54005 assembler using the -Wa mechanism.
54007 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54009 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
54010 Author: Jon Loeliger <jdl@freescale.com>
54011 Date: Fri Oct 27 07:47:22 2006 -0500
54013 MPC86xx: Cleaned up unused and conditionally used local variables.
54015 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54017 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
54018 Author: Wolfgang Denk <wd@pollux.denx.de>
54019 Date: Fri Oct 27 11:55:21 2006 +0200
54021 Fix "ar" flags in some Makefiles to allow for silent "make -s"
54023 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
54024 Author: Ben Warren <bwarren@qstreams.com>
54025 Date: Thu Oct 26 14:38:25 2006 -0400
54027 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
54028 to a TSEC (e.g. a switch is connected via RMII) or
54029 if the PHY is defective/incorrectly configured.
54031 Signed-off-by: Ben Warren <bwarren@qstreams.com>
54033 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
54034 Author: Ben Warren <bwarren@qstreams.com>
54035 Date: Thu Oct 26 14:38:25 2006 -0400
54037 Fix TSEC driver: avoid crashes if PHY is not attached
54038 to a TSEC (e.g. a switch is connected via RMII) or
54039 if the PHY is defective/incorrectly configured.
54041 Signed-off-by: Ben Warren <bwarren@qstreams.com>
54043 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
54044 Author: Wolfgang Denk <wd@pollux.denx.de>
54045 Date: Thu Oct 26 16:24:31 2006 +0200
54049 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
54050 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54051 Date: Wed Oct 25 15:48:59 2006 +0200
54053 Finish up support for the ATSTK1000/ATSTK1002 boards
54055 Add atstk1002_config target to Makefile and move the AVR32 section
54056 down below Blackfin so that it doesn't end up in the middle of
54059 Drop the autogenerated linker script thing for now. Will have to
54060 revisit how to handle chips with different flash and RAM layout
54063 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54065 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
54066 Author: Kumar Gala <galak@kernel.crashing.org>
54067 Date: Tue Oct 24 23:47:37 2006 -0500
54069 Added support for Multi-Image files that contain a device tree
54071 If a Multi-Image file contains a third image we try to use it as a
54072 device tree. The device tree image is assumed to be uncompressed in the
54073 image file. We automatically allocate space for the device tree in memory
54074 and provide an 8k pad to allow more than a reasonable amount of growth.
54076 Additionally, a device tree that was contained in flash will now automatically
54077 get copied to system memory as part of boot. Previously an error was
54078 reported if one tried to boot a device tree that was in flash.
54080 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
54082 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
54083 Author: Wolfgang Denk <wd@denx.de>
54084 Date: Tue Oct 24 21:35:55 2006 +0200
54086 Switch to automatically generated CHANGELOG file.
54087 (use "make CHANGELOG" to update it from time to time)
54089 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
54090 Author: Stefan Roese <sr@denx.de>
54091 Date: Tue Oct 24 18:06:48 2006 +0200
54093 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
54094 Patch by Stefan Roese, 24 Oct 2006
54096 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
54097 Author: Wolfgang Denk <wd@pollux.denx.de>
54098 Date: Tue Oct 24 17:24:55 2006 +0200
54100 Merge with /home/wd/git/u-boot/master
54102 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
54103 Author: Wolfgang Denk <wd@pollux.denx.de>
54104 Date: Tue Oct 24 15:32:57 2006 +0200
54108 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
54109 Author: Wolfgang Denk <wd@pollux.denx.de>
54110 Date: Tue Oct 24 14:51:36 2006 +0200
54112 Move atstk1000 files into vendor specific directory.
54113 Patch by Haavard Skinnemoen, 12 Sep 2006
54115 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
54116 Author: Wolfgang Denk <wd@pollux.denx.de>
54117 Date: Tue Oct 24 14:42:37 2006 +0200
54119 Add ATSTK1000 and ATSTK1002 board support
54120 Patch by Haavard Skinnemoen, 06 Sep 2006
54122 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
54125 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
54126 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
54127 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
54128 CompactFlash cards. For more information, please see this page:
54130 http://www.atmel.com/dyn/products/tools.asp?family_id=682
54132 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
54135 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54137 commit f93ae788c3640fcde5db383471d45548ff4060d0
54138 Author: Wolfgang Denk <wd@pollux.denx.de>
54139 Date: Tue Oct 24 14:31:24 2006 +0200
54141 Add common serial driver for Atmel AT32 and AT91 chips
54142 Patch by Haavard Skinnemoen, 06 Sep 2006
54144 This is a first attempt at creating a common serial driver for Atmel
54145 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
54146 be possible to support AT91RM9200 and other ARM-based chips with some
54147 minor modifications.
54149 There's nothing fundamentally AVR32-specific in this driver, but it
54150 does use some features which are currently only defined for the
54152 * pm_get_clock_freq: Obtain the clock frequency of a given domain
54153 * gd->console_uart: A "struct device" containing information about
54154 register mappings, gpio resources and clocks associated with the
54157 For more information about these features, please see the "AT32AP
54160 commit 72a087e04705c26cad982879ebd06b5281bf825a
54161 Author: Wolfgang Denk <wd@pollux.denx.de>
54162 Date: Tue Oct 24 14:27:35 2006 +0200
54164 Add AT32AP CPU and AT32AP7000 SoC support
54165 Patch by Haavard Skinnemoen, 06 Sep 2006
54167 This patch adds support for the AT32AP CPU family and the AT32AP7000
54168 chip, which is the first chip implementing the AVR32 architecture.
54170 The AT32AP CPU core is a high-performance implementation featuring a
54171 7-stage pipeline, separate instruction- and data caches, and a MMU.
54172 For more information, please see the "AVR32 AP Technical Reference":
54174 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
54176 In addition to this, the AT32AP7000 chip comes with a large set of
54177 integrated peripherals, many of which are shared with the AT91 series
54178 of ARM-based microcontrollers from Atmel. Full data sheet is
54181 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
54183 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54185 commit 7b64fef33c66be648826c0ff9758298ef13d0604
54186 Author: Wolfgang Denk <wd@pollux.denx.de>
54187 Date: Tue Oct 24 14:21:16 2006 +0200
54189 Add AVR32 architecture support
54190 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
54192 This patch adds common infrastructure code for the Atmel AVR32
54193 architecture. See doc/README.AVR32 for details.
54195 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54197 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
54198 Author: Wolfgang Denk <wd@pollux.denx.de>
54199 Date: Tue Oct 24 13:57:33 2006 +0200
54201 Use -g instead of -gstabs in AFLAGS_DEBUG
54202 Patch by Haavard Skinnemoen, 30 Aug 2006
54204 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
54205 matter what the target's preferred debugging format is. This patch
54206 simply replaces -gstabs with -g, so that the default debugging format
54207 for the architecture is used.
54209 commit 965829872169c2996023840d98e1d85ad148d629
54210 Author: Wolfgang Denk <wd@pollux.denx.de>
54211 Date: Tue Oct 24 13:55:18 2006 +0200
54213 Fix/workaround broken dependency handling with make 3.81
54214 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
54216 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
54217 Author: Marian Balakowicz <m8@semihalf.com>
54218 Date: Mon Oct 23 22:17:05 2006 +0200
54220 Fix sequoia separate object direcory building problems.
54222 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
54223 Author: Jon Loeliger <jdl@freescale.com>
54224 Date: Fri Oct 20 17:16:35 2006 -0500
54226 Use generic I2C register block on 85xx and 86xx.
54228 Replace private IMMAP I2C structures with generic reg block
54229 and allow 86xx to have multiple I2C device busses.
54231 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54233 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
54234 Author: Jon Loeliger <jdl@freescale.com>
54235 Date: Fri Oct 20 15:54:34 2006 -0500
54237 Fix compilation warnings on a few 85xx boards.
54239 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54241 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
54242 Author: Jon Loeliger <jdl@freescale.com>
54243 Date: Fri Oct 20 15:50:15 2006 -0500
54245 Converted all 85xx boards to use a common FSL I2C driver.
54246 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
54247 And removed hard i2c path from a few u-boot.lds scipts too.
54248 Minor whitespace cleanups along the way.
54250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54252 commit 4d45f69e362b05892c9e92a7907e5820995612aa
54253 Author: Jon Loeliger <jdl@freescale.com>
54254 Date: Thu Oct 19 12:02:24 2006 -0500
54256 Rewrite a series of goto statements as a sequences of
54257 conditional expressions instead.
54259 Use consistent return code 0/-1 for good/bad indicators.
54261 Include one fewer file if the driver isn't used at all.
54263 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54265 commit 7237c033b02fe295880435f1eb80819a0c987532
54266 Author: Jon Loeliger <jdl@freescale.com>
54267 Date: Thu Oct 19 11:02:16 2006 -0500
54269 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
54271 in an effort to begin to unify the umpteen FSL I2C drivers that
54272 are all otherwise very similar.
54274 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54276 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
54277 Author: Jon Loeliger <jdl@freescale.com>
54278 Date: Thu Oct 19 11:33:52 2006 -0500
54280 * Fix a bunch of compiler warnings for gcc 4.0
54282 Signed-off-by: Matthew McClintock <msm@freescale.com>
54284 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
54285 Author: Stefan Roese <sr@denx.de>
54286 Date: Tue Oct 17 06:14:31 2006 +0200
54288 Add monitor functions for indirect access to PPC440 DCR's
54289 Patch by Leonid Baryudin, 12 Oct 2006
54291 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
54292 Author: Jon Loeliger <jdl@freescale.com>
54293 Date: Fri Oct 13 16:47:53 2006 -0500
54295 Fixed leading whitespace issues.
54296 Removed spurious LAWAR thing.
54298 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54300 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
54301 Author: Jon Loeliger <jdl@freescale.com>
54302 Date: Thu Oct 12 10:42:36 2006 -0500
54304 Remove unneeded include files and local variable.
54306 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54308 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
54309 Author: Grant Likely <grant.likely@secretlab.ca>
54310 Date: Tue Oct 10 00:23:32 2006 -0600
54312 Fix possible uninitialized variable compiler warning.
54314 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
54315 do_bootm_linux() may be uninitialized. There is no possibility in the
54316 current code that len will get used uninitialized, but this fix follows
54317 the existing convention of setting both len and data to zero at the same
54320 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
54322 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
54323 Author: Matthew McClintock <msm@freescale.com>
54324 Date: Wed Oct 11 15:13:01 2006 -0500
54326 * Fix a bunch of compiler warnings for gcc 4.0
54328 Signed-off-by: Matthew McClintock <msm@freescale.com>
54330 commit bf651baa365e5447246aad6a633ccd667cf24a39
54331 Author: Jon Loeliger <jdl@freescale.com>
54332 Date: Wed Oct 11 10:10:43 2006 -0500
54334 Move "ar" flags to config.mk to allow for silent "make -s"
54336 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
54337 Author: Jon Loeliger <jdl@freescale.com>
54338 Date: Tue Oct 10 17:19:03 2006 -0500
54340 Coding style changes to remove local varible blocks
54341 and reformat a bit nicer.
54343 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
54344 Author: Jon Loeliger <jdl@freescale.com>
54345 Date: Tue Oct 10 17:16:04 2006 -0500
54347 Fix whitespace issues.
54349 commit 7b382b7125f2397cce63253df62f183e3dfa2770
54350 Author: Jon Loeliger <jdl@freescale.com>
54351 Date: Tue Oct 10 17:14:45 2006 -0500
54353 Fix whitespace issues.
54355 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
54356 Author: Jon Loeliger <jdl@freescale.com>
54357 Date: Tue Oct 10 17:06:53 2006 -0500
54359 Fix whitespace issues.
54361 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
54362 Author: Jon Loeliger <jdl@freescale.com>
54363 Date: Tue Oct 10 17:03:43 2006 -0500
54365 Ran lindent and cleaned up whitespace issues.
54366 Format for 80-columns too.
54368 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
54369 Author: Jon Loeliger <jdl@freescale.com>
54370 Date: Tue Oct 10 17:02:22 2006 -0500
54372 Fix whitespace and 80-col issues.
54374 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
54375 Author: Stefan Roese <sr@denx.de>
54376 Date: Sat Oct 7 11:36:51 2006 +0200
54378 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
54379 Patch by Stefan Roese, 07 Oct 2006
54381 commit 5bc528fa4da751d472397b308137238a6465afd2
54382 Author: Stefan Roese <sr@denx.de>
54383 Date: Sat Oct 7 11:35:25 2006 +0200
54385 Update ALPR code (NAND support working now)
54386 Patch by Stefan Roese, 07 Oct 2006
54388 commit 77d5034847d328753b80c46b83f960a14a26f40e
54389 Author: Stefan Roese <sr@denx.de>
54390 Date: Sat Oct 7 11:33:03 2006 +0200
54392 Remove compile warnings in fpga code
54393 Patch by Stefan Roese, 07 Oct 2006
54395 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
54396 Author: Stefan Roese <sr@denx.de>
54397 Date: Sat Oct 7 11:30:52 2006 +0200
54399 Add CONFIG_BOARD_RESET to configure board specific reset function
54400 Patch by Stefan Roese, 07 Oct 2006
54402 commit f55df18187e7a45cb73fec4370d12135e6691ae1
54403 Author: John Traill <john.traill@freescale.com>
54404 Date: Fri Sep 29 08:23:12 2006 +0100
54406 Fix missing tCycle/modfreq calculation.
54408 Signed-off-by: John Traill <john.traill@freescale.com>
54410 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
54411 Author: Andy Fleming <afleming@freescale.com>
54412 Date: Wed Sep 13 10:33:35 2006 -0500
54414 Updated config headers to add default FDT-based booting
54416 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
54417 Author: Andy Fleming <afleming@freescale.com>
54418 Date: Wed Sep 13 10:34:18 2006 -0500
54420 Add support for eTSEC 3 & 4 on 8548 CDS
54422 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
54423 This will only work on rev 1.3 boards (but doesn't break older boards)
54424 * Cleaned up some comments to reflect the expanded role of tsec
54427 commit 084d648b109c8984f83674043c1a7fa3885ef801
54428 Author: Andy Fleming <afleming@freescale.com>
54429 Date: Wed Sep 13 10:33:56 2006 -0500
54431 Added code to support 2.6.18 PCI changes in u-boot
54433 * Added code to swizzle the IRQ map for the PCI
54435 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
54436 Author: Jon Loeliger <jdl@freescale.com>
54437 Date: Tue Sep 19 09:34:10 2006 -0500
54439 Modified makefile for new build mechanism.
54441 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54443 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
54444 Author: Jon Loeliger <jdl@freescale.com>
54445 Date: Thu Sep 14 08:40:36 2006 -0500
54447 Handle 86xx SVR values according to the new Reference Manual.
54448 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
54449 by the byte in bits 16-23 instead.
54450 Thanks to Jason Jin for noticing.
54452 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54454 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
54455 Author: Zhang Wei <wei.zhang@freescale.com>
54456 Date: Mon Aug 28 14:25:31 2006 +0800
54458 Fixed an OF-tree off-by-one bug when adding a new property name.
54459 This bug will cause the kernel booting to pause a long time.
54461 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
54462 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
54464 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
54465 Author: Jon Loeliger <jdl@freescale.com>
54466 Date: Tue Aug 29 11:05:09 2006 -0500
54468 Remove trailing empty lines.
54470 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
54471 Author: Jon Loeliger <jdl@freescale.com>
54472 Date: Tue Aug 29 09:48:49 2006 -0500
54474 Remove bogus msync and use volatile asm.
54476 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
54477 Author: Jon Loeliger <jdl@freescale.com>
54478 Date: Tue Aug 29 08:17:14 2006 -0500
54480 Add myself as maintainer for MPC8641HPCN.
54482 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
54483 Author: Zhang Wei <wei.zhang@freescale.com>
54484 Date: Mon Aug 28 14:25:31 2006 +0800
54486 Fixed an OF-tree off-by-one bug when adding a new property name.
54487 This bug will cause the kernel booting to pause a long time.
54489 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
54491 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
54492 Author: Haiying Wang <haiying.wang@freescale.com>
54493 Date: Fri Aug 25 14:38:34 2006 -0400
54495 Change ramdiskaddr and dtbaddr
54496 Remove PEX fluff commands.
54498 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
54499 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54501 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
54502 Author: Matthew McClintock <msm@freescale.com>
54503 Date: Wed Aug 23 13:32:45 2006 -0500
54505 * Another small fix for booting with disable_of
54507 Signed-off-by: Matthew McClintock <msm@freescale.com>
54509 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
54510 Author: Jon Loeliger <jdl@freescale.com>
54511 Date: Wed Aug 23 11:04:43 2006 -0500
54513 Cleanup and lindent new AHCI driver.
54515 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
54516 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
54517 Date: Wed Aug 23 19:15:12 2006 +0800
54519 Add AHCI define and sata support for MPC8641HPCN board.
54521 Signed-off-by:Jason Jin<jason.jin@freescale.com>
54523 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
54524 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
54525 Date: Wed Aug 23 19:10:44 2006 +0800
54527 Add AHCI support to u-boot
54529 Add AHCI support in u-boot, enable the sata disk controllers which
54530 following the AHCI protocol.
54532 Signed-off-by:Jason Jin<jason.jin@freescale.com>
54534 commit d8ea2acf5f137cae99417df4f573d036ee384668
54535 Author: Zhang Wei <wei.zhang@freescale.com>
54536 Date: Wed Aug 23 17:54:32 2006 +0800
54538 Add dtb boot-up parameter to default boot commands.
54540 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
54542 commit b93775c2036b99baa390ea425c4771895bbc63c4
54543 Author: Jon Loeliger <jdl@freescale.com>
54544 Date: Tue Aug 22 18:26:08 2006 -0500
54546 Cleanup even more poorly introduced whitespace.
54548 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
54549 Author: Jon Loeliger <jdl@freescale.com>
54550 Date: Tue Aug 22 18:07:00 2006 -0500
54552 Cleanup more poorly introduced whitespace.
54554 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
54555 Author: Jon Loeliger <jdl@freescale.com>
54556 Date: Tue Aug 22 17:54:05 2006 -0500
54558 Cleanup poorly introduced whitespace.
54560 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
54561 Author: Jon Loeliger <jdl@freescale.com>
54562 Date: Tue Aug 22 12:25:27 2006 -0500
54564 General indent and whitespace cleanups.
54566 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
54567 Author: Jon Loeliger <jdl@freescale.com>
54568 Date: Tue Aug 22 12:06:18 2006 -0500
54570 General indent and whitespace cleanups.
54572 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
54573 Author: Jon Loeliger <jdl@freescale.com>
54574 Date: Tue Aug 22 10:42:21 2006 -0500
54576 Cleanup compiler warnings.
54578 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
54579 Author: Matthew McClintock <msm@freescale.com>
54580 Date: Tue Aug 22 09:31:59 2006 -0500
54582 Fix disable_of booting
54584 Signed-off-by: Matthew McClintock <msm@freescale.com>
54586 commit 87a449c8ac396420cb24260f717ea9e6faa82047
54587 Author: Matthew McClintock <msm@freescale.com>
54588 Date: Tue Aug 22 09:23:55 2006 -0500
54590 Support for FDT in uImage format, error when using FDT from flash
54592 Signed-off-by: Matthew McClintock <msm@freescale.com>
54594 commit 75c299c38369d01addd5e054b8a16217b70f4a86
54595 Author: Haiying Wang <haiying.wang@freescale.com>
54596 Date: Tue Aug 15 15:12:55 2006 -0400
54598 Unlock cache before kernel starts up for MPC86xx
54600 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
54601 Author: Haiying Wang <haiying.wang@freescale.com>
54602 Date: Tue Aug 15 15:13:15 2006 -0400
54604 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
54606 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
54607 Author: Haiying Wang <haiying.wang@freescale.com>
54608 Date: Tue Aug 15 15:12:55 2006 -0400
54610 Unlock cache before kernel starts up for MPC86xx
54612 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
54613 Author: Haiying Wang <haiying.wang@freescale.com>
54614 Date: Tue Aug 15 15:13:15 2006 -0400
54616 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
54618 commit 86c8e17f25e972a7e272950a0735fad84e082b88
54619 Author: Matthew McClintock <msm@freescale.com>
54620 Date: Wed Aug 16 13:59:47 2006 -0500
54622 * Fix disable_of booting
54624 Signed-off-by: Matthew McClintock <msm@freescale.com>
54626 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
54627 Author: Matthew McClintock <msm@freescale.com>
54628 Date: Wed Aug 16 10:54:09 2006 -0500
54630 * Support for FDT in uImage format, error when using FDT from flash
54632 Signed-off-by: Matthew McClintock <msm@freescale.com>
54634 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
54635 Author: Stefan Roese <sr@denx.de>
54636 Date: Tue Aug 15 14:22:35 2006 +0200
54638 Add initial support for the ALPR board from Prodrive
54639 NAND needs some additional testing
54640 Patch by Heiko Schocher, 15 Aug 2006
54642 commit f0ff4692ff3372dec55074a8eb444943ab095abb
54643 Author: Stefan Roese <sr@denx.de>
54644 Date: Tue Aug 15 14:15:51 2006 +0200
54646 Add FPGA Altera Cyclone 2 support
54647 Patch by Heiko Schocher, 15 Aug 2006
54649 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
54650 Author: Jon Loeliger <jdl@freescale.com>
54651 Date: Mon Aug 14 15:33:38 2006 -0500
54653 Fix BAT0 to actually be cacheable, non-guarded as documented.
54655 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54657 commit 40bc83559db5745681909fd7382ae509567e116d
54658 Author: Jon Loeliger <jdl@freescale.com>
54659 Date: Wed Aug 9 15:32:16 2006 -0500
54661 Removed MPC8641HPCN DTS source file from build.
54662 It is no longer linked into U-Boot; its sources are
54663 now located in the kernel tree.
54665 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54667 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
54668 Author: Matthew McClintock <msm@freescale.com>
54669 Date: Wed Jun 28 10:47:03 2006 -0500
54671 * Switched default PCI speed for 8540 ADS back to 33MHz
54673 * Added comments and a printf to warn that PCI-X won't
54675 Patch by Andy Fleming 17-Mar-2006
54677 Signed-off-by: Andy Fleming <afleming@freescale.com>
54679 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
54680 Author: Matthew McClintock <msm@freescale.com>
54681 Date: Wed Jun 28 10:46:35 2006 -0500
54683 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
54685 Signed-off-by: Andy Fleming <afleming@freescale.com>
54687 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
54688 Author: Matthew McClintock <msm@freescale.com>
54689 Date: Wed Jun 28 10:46:13 2006 -0500
54691 * Added VIA configuration table
54693 * Added support for PCI2 on CDS
54694 Patch by Andy Fleming 17-Mar-2006
54696 Signed-off-by: Andy Fleming <afleming@freescale.com>
54698 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
54699 Author: Matthew McClintock <msm@freescale.com>
54700 Date: Wed Jun 28 10:45:41 2006 -0500
54702 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
54704 Signed-off-by: Andy Fleming <afleming@freescale.com>
54706 commit 97074ed9655309b64231bc2cee69fe85399f8055
54707 Author: Matthew McClintock <msm@freescale.com>
54708 Date: Wed Jun 28 10:45:17 2006 -0500
54710 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
54712 Signed-off-by: Andy Fleming <afleming@freescale.com>
54714 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
54715 Author: Matthew McClintock <msm@freescale.com>
54716 Date: Wed Jun 28 10:44:49 2006 -0500
54718 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
54720 Signed-off-by: Andy Fleming <afleming@freescale.com>
54722 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
54723 Author: Matthew McClintock <msm@freescale.com>
54724 Date: Wed Jun 28 10:44:23 2006 -0500
54726 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
54728 Signed-off-by: Andy Fleming <afleming@freescale.com>
54730 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
54731 Author: Matthew McClintock <msm@freescale.com>
54732 Date: Wed Jun 28 10:43:36 2006 -0500
54734 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
54736 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54738 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
54739 Author: Matthew McClintock <msm@freescale.com>
54740 Date: Wed Jun 28 10:43:00 2006 -0500
54742 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
54744 commit 5498d90312aad9f6bdbf047986027c35b03cd163
54745 Author: Matthew McClintock <msm@freescale.com>
54746 Date: Wed Jun 28 10:42:24 2006 -0500
54748 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
54750 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
54751 Author: Matthew McClintock <msm@freescale.com>
54752 Date: Wed Jun 28 10:41:37 2006 -0500
54754 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
54756 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
54757 Author: John Traill <john.traill@freescale.com>
54758 Date: Wed Aug 9 14:33:50 2006 +0100
54760 Add Rapidio support for the MPC8641HPCN
54762 Signed-off-by: John Traill <john.traill@freescale.com>
54764 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
54765 Author: John Traill <john.traill@freescale.com>
54766 Date: Tue Aug 8 11:32:43 2006 +0100
54768 Fix caslat calculation
54770 Signed-off-by: John Traill <john.traill@freescale.com>
54772 commit 709d3073e74153278e7904a70819bbef7df50e1a
54773 Author: Jon Loeliger <jdl@freescale.com>
54774 Date: Thu Aug 3 16:17:56 2006 -0500
54776 Convert to mac-address in ethernet nodes.
54778 commit 71748af833ca1017edf1415be376366ff2937d17
54779 Author: Haiying Wang <haiying.wang@freescale.com>
54780 Date: Fri Jul 28 12:41:35 2006 -0400
54782 Correct the irq value of DUART2
54784 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
54785 Author: Haiying Wang <haiying.wang@freescale.com>
54786 Date: Fri Jul 28 12:41:41 2006 -0400
54788 Change the space size of PEX IO in README
54790 commit 239db37c94f7a92941c4465feceb867c609241c5
54791 Author: Haiying Wang <haiying.wang@freescale.com>
54792 Date: Fri Jul 28 12:41:18 2006 -0400
54794 Move get_board_sys_clk to board directory
54796 commit 492900b985439fbce1a118afde1e35def870db03
54797 Author: John Traill <john.traill@freescale.com>
54798 Date: Fri Jul 28 09:03:54 2006 +0100
54800 Fix 8641HPCN pollution
54802 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
54803 Author: John Traill <john.traill@freescale.com>
54804 Date: Fri Jul 28 08:16:06 2006 +0100
54806 Fix 8641HPCN timebase
54808 commit c86360b830f1eecd7a72208575dde4f57879faea
54809 Author: Zhang Wei <wei.zhang@freescale.com>
54810 Date: Fri Jul 28 00:01:34 2006 +0800
54812 Fixed OF device tree of mpc86xxhpcn board.
54814 The changes works in with kernel irq mapping rework.
54816 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
54818 commit bea3f28d285942bf3f7ab339ce85178ded544225
54819 Author: Haiying Wang <haiying.wang@freescale.com>
54820 Date: Wed Jul 12 10:48:05 2006 -0400
54822 Add support for reading and writing mac addresses to or from ID EEPROM.
54824 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
54825 With attached patch, we can use command "mac/mac read/mac save/"
54826 to read and write EEPROM under u-boot prompt.
54828 U-boot will calculate the checksum of EEPROM while bootup,
54829 if it is right, then u-boot will check whether the mac address
54830 of eTSEC0/1/2/3 is availalbe (non-zero).
54832 If there is mac address availabe in EEPROM, u-boot will use it,
54833 otherewise, u-boot will use the mac address defined in
54834 MPC8641HPCN.h. This matches the requirement to set unique mac address
54835 for each TSEC port.
54837 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
54838 Signed-off-by: York Sun <yorksun@freescale.com>
54840 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
54841 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
54842 Date: Thu Jul 13 10:35:10 2006 -0500
54844 Fixed initrd issue by define big RAM
54846 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
54848 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
54849 Author: Jason Jin <Jason.jin@freescale.com>
54850 Date: Fri Jul 7 10:01:45 2006 -0500
54852 We made a u-boot patch to fix the hang up issue
54853 when booting filesystem from ramdisk.
54855 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
54857 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
54858 Author: Matthew McClintock <msm@freescale.com>
54859 Date: Wed Jun 28 10:47:03 2006 -0500
54861 * Switched default PCI speed for 8540 ADS back to 33MHz
54862 * Added comments and a printf to warn that PCI-X won't
54864 Patch by Andy Fleming 17-Mar-2006
54866 Signed-off-by: Andy Fleming <afleming@freescale.com>
54868 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
54869 Author: Matthew McClintock <msm@freescale.com>
54870 Date: Wed Jun 28 10:46:35 2006 -0500
54872 * Fixed a bug where 8555 PCI code used the old variable and
54874 Patch by Andy Fleming 17-Mar-2006
54876 Signed-off-by: Andy Fleming <afleming@freescale.com>
54878 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
54879 Author: Matthew McClintock <msm@freescale.com>
54880 Date: Wed Jun 28 10:46:13 2006 -0500
54882 * Added VIA configuration table
54883 * Added support for PCI2 on CDS
54884 Patch by Andy Fleming 17-Mar-2006
54886 Signed-off-by: Andy Fleming <afleming@freescale.com>
54888 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
54889 Author: Matthew McClintock <msm@freescale.com>
54890 Date: Wed Jun 28 10:45:41 2006 -0500
54892 * Fixed PCI memory definitions
54893 Patch by Andy Fleming 17-Mar-2006
54895 Signed-off-by: Andy Fleming <afleming@freescale.com>
54897 commit 087454609e47295443af793a282cddcd91a5f49c
54898 Author: Matthew McClintock <msm@freescale.com>
54899 Date: Wed Jun 28 10:45:17 2006 -0500
54901 * Added support for initializing second PCI bus on 85xx
54902 Patch by Andy Fleming 17-Mar-2006
54904 Signed-off-by: Andy Fleming <afleming@freescale.com>
54906 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
54907 Author: Matthew McClintock <msm@freescale.com>
54908 Date: Wed Jun 28 10:44:49 2006 -0500
54910 * Added PCI-X #defines for PCI-X initialization
54911 Patch by Andy Fleming on 17-Mar-2006
54913 Signed-off-by: Andy Fleming <afleming@freescale.com>
54915 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
54916 Author: Matthew McClintock <msm@freescale.com>
54917 Date: Wed Jun 28 10:44:23 2006 -0500
54919 * Made sure the code which disables prefetch for PCI devices
54920 sets the size of the prefetch region to 0
54921 Patch by Andy Fleming on 17-Mar-2006
54923 Signed-off-by: Andy Fleming <afleming@freescale.com>
54925 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
54926 Author: Matthew McClintock <msm@freescale.com>
54927 Date: Wed Jun 28 10:43:36 2006 -0500
54929 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
54930 Patch by Jon Loeliger 17-Jan-2006
54932 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54934 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
54935 Author: Matthew McClintock <msm@freescale.com>
54936 Date: Wed Jun 28 10:43:00 2006 -0500
54938 * Removed the oftree.dts for stxxtx in light of the changes
54939 to the flat device tree handling code
54940 Patch by Matthew McClintock 26-June-2006
54942 commit 1b380ec225665e73959677f3893dc658c5925e05
54943 Author: Matthew McClintock <msm@freescale.com>
54944 Date: Wed Jun 28 10:42:24 2006 -0500
54946 * Patch to modify ft_build.c to update flat device trees in place
54947 Patch by Matthew McClintock 26-June-2006
54949 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
54950 Author: Matthew McClintock <msm@freescale.com>
54951 Date: Wed Jun 28 10:41:37 2006 -0500
54953 * Modify bootm command to support booting with flat device trees
54954 Patch by Matthew McClintock 26-June-2006
54956 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
54957 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
54958 Date: Wed Jun 28 08:43:56 2006 -0500
54960 Change Id to symbolic name for RTL8139
54962 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
54964 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
54965 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
54966 Date: Tue Jun 27 18:12:10 2006 +0800
54968 Fix RTL8139 in big endian
54970 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
54971 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
54973 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
54974 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
54975 Date: Tue Jun 27 18:12:23 2006 +0800
54977 Fix Tsec bug when no link
54979 When tftp a non-exist file from the tftp server, u-boot will check
54980 the link of all eth port. The original file will return wrong link
54981 state on the no link ports.
54983 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
54985 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
54986 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
54987 Date: Tue Jun 27 18:12:02 2006 +0800
54989 Fix bug for io_bar size during pci scan
54991 During the pci scan process, Some devices return bar_reponse with the
54992 highest bytes 0, such as the pci bridge in uli1575 return bar_response
54993 with 0xffffff, So the bar_size should be manually set under 64K.
54995 Signed-off-by: Jason Jin <jason.jin@freescale.com>
54997 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
54998 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
54999 Date: Tue Jun 27 18:11:54 2006 +0800
55001 Enable PCIE1 for MPC8641HPCN board
55003 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
55005 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
55006 Author: Wolfgang Denk <wd@pollux.denx.de>
55007 Date: Mon Jun 26 11:06:00 2006 +0200
55011 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
55012 Author: Jon Loeliger <jdl@freescale.com>
55013 Date: Thu Jun 22 08:51:46 2006 -0500
55015 Fix bug in 8641hpcn reset command with no args.
55017 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
55018 Acked-by: Jon Loeliger <jdl@freescale.com>
55020 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
55021 Author: Zhang Wei <wei.zhang@freescale.com>
55022 Date: Tue Jun 20 17:47:15 2006 +0800
55024 Reworked IRQ mapping in OF-tree.
55026 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
55027 Author: Jon Loeliger <jdl@freescale.com>
55028 Date: Thu Jun 15 21:33:37 2006 -0500
55030 Do not enable address translation on secondary CPUs.
55031 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
55033 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55035 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
55036 Author: Wolfgang Denk <wd@pollux.denx.de>
55037 Date: Wed Jun 14 18:14:56 2006 +0200
55041 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
55042 Author: Wolfgang Denk <wd@pollux.denx.de>
55043 Date: Wed Jun 14 17:45:53 2006 +0200
55045 Various USB related patches
55046 - Add support for mpc8xx USB device.
55047 - Add support for Common Device Class - Abstract Control Model USB console.
55048 - Add support for flow control in USB slave devices.
55049 - Add support for switching between gserial and cdc_acm using environment.
55050 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
55051 - Update usbcore slightly to ease host enumeration.
55052 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
55053 - Add AdderUSB_config as a defconfig to enable usage of the USB console
55054 by default with the Adder87x U-Boot port.
55055 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
55057 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
55058 Author: Jon Loeliger <jdl@jdl.com>
55059 Date: Wed Jun 7 10:53:55 2006 -0500
55061 Fix a get_board_sys_clk() use-before-def warning.
55063 Signed-off-by: Jon Loeliger <jdl@jdl.com>
55065 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
55066 Author: Jon Loeliger <jdl@jdl.com>
55067 Date: Wed Jun 7 10:52:49 2006 -0500
55069 Allow DTC path to be passed in.
55071 Signed-off-by: Jon Loeliger <jdl@jdl.com>
55073 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
55074 Author: Haiying Wang <haiying.wang@freescale.com>
55075 Date: Tue Jun 6 16:54:29 2006 -0400
55077 Modify the IRQ of DUART2
55079 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
55080 Author: Jon Loeliger <jdl@jdl.com>
55081 Date: Wed May 31 13:55:35 2006 -0500
55085 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55087 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
55088 Author: Jon Loeliger <jdl@jdl.com>
55089 Date: Wed May 31 12:44:44 2006 -0500
55091 White space cleanup.
55092 Some 80-column cleanups.
55093 Convert printf() to puts() where possible.
55094 Use #include "spd_sdram.h" as needed.
55095 Enhanced reset command usage message a bit.
55097 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55099 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
55100 Author: Jon Loeliger <jdl@jdl.com>
55101 Date: Wed May 31 11:39:34 2006 -0500
55103 Removed unneeded local_bus_init() from 8641HPCN board.
55105 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55107 commit 4d3d729c16c392d2982d3266b659d333c927697d
55108 Author: Jon Loeliger <jdl@jdl.com>
55109 Date: Wed May 31 11:24:28 2006 -0500
55111 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
55113 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55115 commit b2a941de060350ad15878d8219825f4950e9bb8e
55116 Author: Jon Loeliger <jdl@jdl.com>
55117 Date: Wed May 31 10:07:28 2006 -0500
55119 Remove dead debug code.
55121 Signed-off-by: Jon Loeliger <jdl@jdl.com>
55123 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
55124 Author: Jon Loeliger <jdl@freescale.com>
55125 Date: Tue May 30 17:47:00 2006 -0500
55127 Move mpc86xx PIXIS code to board directory
55129 First cut at moving the PIXIS platform code out of
55130 the 86xx cpu directory and into board/mpc8641hpcn
55133 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55135 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
55136 Author: Markus Klotzbuecher <mk@denx.de>
55137 Date: Tue May 30 16:56:14 2006 +0200
55139 Support generic OHCI support for the s3c24x0 cpu.
55141 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
55142 Author: Haiying Wang <Haiying.Wang@freescale.com>
55143 Date: Tue May 30 09:10:32 2006 -0500
55145 Improve "reset" command's interaction with watchdog.
55147 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
55148 "reset altbank wd" will reset another bank WITH watch dog enabled
55149 "diswd" will disable watch dog after u-boot boots up successfully
55151 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
55153 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
55154 Author: Haiying Wang <Haiying.Wang@freescale.com>
55155 Date: Tue May 30 08:51:19 2006 -0500
55157 Fix two SDRAM setup bugs.
55160 Enable 1T/2T based on number of DIMMs present.
55162 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
55164 commit d11fec5015334deb2010e36ce00bb118cc5429a5
55165 Author: Haiying Wang <Haiying.Wang@freescale.com>
55166 Date: Fri May 26 10:24:48 2006 -0500
55168 Add first draft of the MPC8641HPCN doc/README.
55170 Signed-off-by: Jon Loeliger <jdl@jdl.com>
55172 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
55173 Author: Haiying Wang <Haiying.Wang@freescale.com>
55174 Date: Fri May 26 10:13:04 2006 -0500
55176 Added pci@8000 block.
55177 Updated ethernet interrupt mappings (moved up 48).
55178 Cleaned up a few comments.
55180 Signed-off-by: Jon Loeliger <jdl@jdl.com>
55182 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
55183 Author: Haiying Wang <Haiying.Wang@freescale.com>
55184 Date: Fri May 26 10:01:16 2006 -0500
55186 Allow args on reset command.
55188 Signed-off-by: Jon Loeliger <jdl@jdl.com>
55190 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
55191 Author: Markus Klotzbuecher <mk@denx.de>
55192 Date: Tue May 23 13:38:35 2006 +0200
55194 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
55195 fixes to the latter.
55197 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
55198 Author: Markus Klotzbuecher <mk@denx.de>
55199 Date: Tue May 23 10:33:11 2006 +0200
55201 More cleanup for the delta board and the generic usb_ohci driver. Added
55202 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
55203 initialization and cleanup hooks respectively.
55205 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
55206 Author: Markus Klotzbuecher <mk@denx.de>
55207 Date: Mon May 22 16:33:54 2006 +0200
55209 This patch adds USB storage support for the delta board. This is the first
55210 board to make use of a generic OHCI driver, that calls hooks for board
55211 dependant initialization.
55213 commit 14e37081ff3cac7ebe6e93836523429853b6b292
55214 Author: Jon Loeliger <jdl@jdl.com>
55215 Date: Fri May 19 13:28:39 2006 -0500
55217 Change arbitration to round-robin for SMP linux.
55219 commit 9a655876e5995be80f49054e2509500e871e4d3a
55220 Author: Jon Loeliger <jdl@jdl.com>
55221 Date: Fri May 19 13:26:34 2006 -0500
55223 Enable dual DDR controllers and interleaving.
55225 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
55226 Author: Jon Loeliger <jdl@jdl.com>
55227 Date: Fri May 19 13:22:44 2006 -0500
55229 Update 86xx address map and LAWBARs.
55231 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
55232 Author: Jon Loeliger <jdl@jdl.com>
55233 Date: Fri May 19 13:14:15 2006 -0500
55235 Remove L2 Cache invalidate polling.
55237 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
55238 Author: Jon Loeliger <jdl@jdl.com>
55239 Date: Fri May 19 12:33:09 2006 -0500
55241 Enable 2nd CPU and I2C.
55243 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
55244 Author: Jon Loeliger <jdl@freescale.com>
55245 Date: Mon May 15 07:26:56 2006 -0500
55247 Update interrupt mapping.
55249 commit 6cfea33477b04b63ed47386ed1629529484c33ba
55250 Author: Haiying Wang <Haiying.Wang@freescale.com>
55251 Date: Wed May 10 09:38:06 2006 -0500
55253 Remove unneeded INIT_RAM_LOCK cache twiddling.
55254 Correctly tracks r29 as global data pointer now.
55256 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
55258 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
55259 Author: Jon Loeliger <jdl@freescale.com>
55260 Date: Wed May 10 09:33:07 2006 -0500
55262 Remove unnecessary flash.c file.
55264 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
55265 Author: Jon Loeliger <jdl@freescale.com>
55266 Date: Tue May 9 08:23:49 2006 -0500
55268 Get MPC8641HPCN flash images working.
55270 Enable the CFI driver.
55271 Remove bogus LAWBAR7 cruft.
55272 Use correct TEXT_BASE, Fixup load script.
55273 Enable SPD EEPROM during DDR setup.
55274 Use generic RFC 1918 IP addresses by default.
55276 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
55277 Author: Jon Loeliger <jdl@freescale.com>
55278 Date: Thu Apr 27 10:15:16 2006 -0500
55280 Cleanup whitespaces and style issues.
55281 Removed //-style comments.
55282 Use 80-column lines.
55283 Remove trailing whitespace.
55284 Remove dead code and debug cruft.
55286 commit a2320a6bf8113a09544c42d160d10ac69d049a03
55287 Author: Jon Loeliger <jdl@freescale.com>
55288 Date: Thu Apr 27 08:22:39 2006 -0500
55290 Revert bad PCI prefetch limit change.
55292 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
55293 Author: Jon Loeliger <jdl@freescale.com>
55294 Date: Wed Apr 26 17:58:56 2006 -0500
55296 Initial support for MPC8641 HPCN board.