1 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
2 Author: Wolfgang Denk <wd@denx.de>
3 Date: Wed Apr 18 17:07:26 2007 +0200
5 Cleanup, update CHANGELOG
7 Sigend-off-by: Wolfgang Denk <wd@denx.de>
9 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
10 Author: Wolfgang Denk <wd@denx.de>
11 Date: Wed Apr 18 16:17:46 2007 +0200
15 commit ad4eb555671d97f96dc56eab55103b1f86874b01
16 Author: Wolfgang Denk <wd@denx.de>
17 Date: Wed Apr 18 14:30:39 2007 +0200
19 MCC200 board: remove warning which is obsolete after PSoC firmware changes
21 Signed-off-by: Wolfgang Denk <wd@denx.de>
23 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
24 Author: Domen Puncer <domen.puncer@telargo.com>
25 Date: Wed Apr 18 12:11:05 2007 +0200
27 [PATCH] icecube/lite5200b: document wakeup from low-power support
29 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
31 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
32 Author: Stefan Roese <sr@denx.de>
33 Date: Wed Apr 18 12:07:47 2007 +0200
35 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
37 Signed-off-by: Stefan Roese <sr@denx.de>
39 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
40 Author: Stefan Roese <sr@denx.de>
41 Date: Wed Apr 18 12:05:59 2007 +0200
43 ppc4xx: Add output for bootrom location to 405EZ ports
45 Now 405EZ ports also show upon bootup from which boot device
46 they are configured to boot:
48 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
50 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
51 Bootstrap Option E - Boot ROM Location EBC (32 bits)
52 16 kB I-Cache 16 kB D-Cache
53 Board: Acadia - AMCC PPC405EZ Evaluation Board
55 Signed-off-by: Stefan Roese <sr@denx.de>
57 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
58 Author: Domen Puncer <domen.puncer@telargo.com>
59 Date: Mon Apr 16 14:00:13 2007 +0200
61 [PATCH] icecube/lite5200b: wakeup from low-power support
63 U-Boot part of Lite5200b low power mode support.
64 Puts SDRAM out of self-refresh and transfers control to
65 address saved at physical 0x0.
67 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
68 Acked-by: Grant Likely <grant.likely@secretlab.ca>
70 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
71 Author: Wolfgang Denk <wd@denx.de>
72 Date: Sat Apr 14 21:16:54 2007 +0200
76 commit 8e6875183cdca91c134408d119d4abcd48ef6856
77 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
78 Date: Sun Dec 17 18:56:46 2006 +0100
80 AVR32: Enable MMC support
82 Set up the portmux for the MMC interface and enable the MMC driver
83 along with support for DOS partitions, ext2 and FAT filesystems.
85 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
87 commit fc26c97bb6df41b4a95662c34054fe912387bf38
88 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
89 Date: Fri Jan 20 10:03:53 2006 +0100
93 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
95 The AT91 ARM-based CPUs use basically the same hardware, so it should
96 be possible to share this driver, but no effort has been made so far.
98 Hardware documentation can be found in the AT32AP7000 data sheet,
99 which can be downloaded from
101 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
103 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
105 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
106 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
107 Date: Sun Dec 17 18:55:37 2006 +0100
109 AVR32: Add clk and gpio infrastructure for mmci
111 Implement functions for configuring the mmci pins, as well as
112 functions for getting the clock rate of the mmci controller.
114 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
116 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
117 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
118 Date: Sun Dec 17 18:53:56 2006 +0100
120 Enable partition support with MMC
122 Include implementations of init_part() and get_partition_info() when
125 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
127 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
128 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
129 Date: Sun Dec 17 17:14:30 2006 +0100
131 AVR32: Enable networking
133 Implement MACB initialization for AVR32 and ATSTK1000, and turn
134 everything on, including the MACB driver.
136 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
138 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
139 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
140 Date: Fri Jan 20 10:03:34 2006 +0100
142 Atmel MACB ethernet driver
144 Driver for the Atmel MACB on-chip ethernet controller.
146 This driver has been tested on the ATSTK1000 board with a AT32AP7000
147 CPU. It should probably work on AT91SAM926x as well with some minor
150 Hardware documentation can be found in the AT32AP7000 data sheet,
151 which can be downloaded from
153 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
155 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
157 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
158 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
159 Date: Sun Dec 17 16:56:14 2006 +0100
161 AVR32: Add clk and gpio infrastructure for macb0 and macb1
163 Implement functions for configuring the macb0 and macb1 pins, as
164 well as functions for getting the clock rate of the various
165 busses the macb ethernet controllers are connected to.
167 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
169 commit d5acb95b16a0a74c643524342c3437e765426d05
170 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
171 Date: Sun Dec 17 15:39:15 2006 +0100
173 AVR32: Implement simple DMA memory allocator
175 Implement dma_alloc_coherent() which returns cache-aligned
178 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
180 commit 91975b0fea773c9e681fea8cf3349669f27685ee
181 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
182 Date: Sun Dec 17 15:46:02 2006 +0100
184 Import <linux/mii.h> from the Linux kernel
186 Instead of creating yet another set of MII register definitions
187 in the macb driver, here's a complete set of definitions for everyone
190 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
192 commit 1b804b229556a4d862da93c0ec94e79419364b2c
193 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
194 Date: Wed Mar 21 19:47:36 2007 +0100
196 AVR32: Include more commands for ATSTK1000
198 Include the imi, imls and jffs commands sets by default on ATSTK1000.
199 Also define CONFIG_BOOTARGS to something more useful, define
200 CONFIG_BOOTCOMMAND and enable autoboot by default.
202 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
204 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
205 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
206 Date: Wed Mar 21 19:44:48 2007 +0100
208 AVR32: Provide a definition of struct stat
210 Copy the definition of struct stat from the Linux kernel.
212 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
214 commit 12f099c08167a7a51aeee623bc16dafd0841271c
215 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
216 Date: Sun Dec 17 14:46:06 2006 +0100
218 AVR32: Use initdram() instead of board_init_memories()
220 Conform to the "standard" interface and use initdram() instead of
221 board_init_memories() on AVR32. This enables us to get rid of the
222 sdram_size member of the global_data struct as well.
224 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
226 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
227 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
228 Date: Mon Nov 20 15:53:10 2006 +0100
230 AVR32: Relocate u-boot to SDRAM
232 Relocate the u-boot image into SDRAM like everyone else does. This
233 means that we can handle much larger .data and .bss than we used to.
235 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
237 commit df548d3c3e2bbc40258713167859ffc2ce99a900
238 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
239 Date: Sun Nov 19 18:06:53 2006 +0100
241 AVR32: Resource management rewrite
243 Rewrite the resource management code (i.e. I/O memory, clock gating,
244 gpio) so it doesn't depend on any global state. This is necessary
245 because this code is heavily used before relocation to RAM, so we
246 can't write to any global variables.
248 As an added bonus, this makes u-boot's memory footprint a bit smaller,
249 although some functionality has been left out; all clocks are enabled
250 all the time, and there's no checking for gpio line conflicts.
252 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
254 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
255 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
256 Date: Sat Nov 18 18:01:13 2006 +0100
258 AVR32: Clean up memory-map.h for at32ap7000
260 Convert spaces to tabs (must have missed this one last time around),
261 sort the entries by address and group them together by bus
264 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
266 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
267 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
268 Date: Sat Nov 18 17:32:31 2006 +0100
270 AVR32: Build position-independent u-boot
272 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
273 position independent. This will make relocation a lot easier.
275 -mno-init-got means that gcc shouldn't emit code to load the GOT
276 address into r6 in every function prologue. We do it once and for
277 all in the early startup assembly code, so enabling this option
278 makes u-boot a bit faster and smaller.
280 The assembly parts have always been position-independent, so no code
281 changes should be necessary.
283 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
285 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
286 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
287 Date: Sat Nov 18 17:24:31 2006 +0100
289 AVR32: Use avr32-linux- cross-compilation prefix by default
291 It doesn't really matter which toolchain you use to compile u-boot,
292 but the avr32-linux one is probably what most people have installed.
294 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
296 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
297 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
298 Date: Sat Nov 18 17:15:30 2006 +0100
300 AVR32: Split start_u_boot into board_init_f and board_init_r
302 Split the avr32 initialization code into a function to run before
303 relocation, board_init_f and a function to run after relocation,
304 board_init_r. For now, board_init_f simply calls board_init_r
307 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
309 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
310 Author: Heiko Schocher <hs@pollux.denx.de>
311 Date: Sat Apr 14 05:26:48 2007 +0200
313 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
314 clear the Display after reset.
316 Signed-off-by: Heiko Schocher <hs@denx.de>
318 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
319 Author: Denis Peter <d.peter@mpl.ch>
320 Date: Fri Apr 13 09:13:33 2007 +0200
322 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
324 Fix bug introduced by "Fix get_partition_info() parameter error in all
325 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
326 to use diskboot or scsiboot form another device than 0.
328 Signed-off-by: Denis Peter <d.peter@mpl.ch>
330 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
331 Author: Greg Lopp <lopp@pobox.com>
332 Date: Fri Apr 13 08:02:24 2007 +0200
334 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
336 Signed-of-by: Greg Lopp <lopp@pobox.com>
337 Acked-by: Grant Likely <grant.likely@secretlab.ca>
339 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
340 Author: Jeffrey Mann <mannj@embeddedplanet.com>
341 Date: Thu Apr 12 14:15:59 2007 +0200
343 ppc4xx: Fix i2c divisor calcularion for PPC4xx
345 This patch fixes changes the i2c_init(...) function to use the function
346 get_OPB_freq() rather than calculating the OPB speed by
347 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
348 specific per processor. The prior method was not and so was calculating
349 the wrong speed for some PPC4xx processors.
351 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
352 Signed-off-by: Stefan Roese <sr@denx.de>
354 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
355 Author: Wolfgang Denk <wd@denx.de>
356 Date: Wed Apr 11 17:25:01 2007 +0200
360 Signed-off-by: Wolfgang Denk <wd@denx.de>
362 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
363 Author: Wolfgang Denk <wd@denx.de>
364 Date: Wed Apr 11 17:22:55 2007 +0200
368 * Make IDE timeout configurable through ide_reset_timeout variable.
369 * Use Newline as "password" string
370 * Use just a single partition in NAND flash
372 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
373 Author: Haiying Wang <haiying.wang@freescale.com>
374 Date: Mon Jan 22 12:37:30 2007 -0600
376 Add PIXIS FPGA support for MPC8641HPCN board.
378 Move the 8641HPCN's PIXIS code to the new directory
379 board/freescale/common/ as it will be shared by
380 future boards not in the same processor family.
382 Write a "pixis_reset" command that utilizes the FPGA
383 reset sequencer to support alternate soft-reset options
384 such as using the "alternate" flash bank, enabling
385 the watch dog, or choosing different CPU frequencies.
387 Add documentation for the pixis_reset to README.mpc8641hpcn.
389 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
390 Signed-off-by: Jon Loeliger <jdl@freescale.com>
392 commit c0707ce65677650b5ceab0500ee50ae5168afef2
393 Author: Aubrey Li <aubrey.adi@gmail.com>
394 Date: Thu Apr 5 18:34:06 2007 +0800
396 [Blackfin][PATCH] Kill off a bunch of common local prototypes
398 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
399 Author: Aubrey Li <aubrey.adi@gmail.com>
400 Date: Thu Apr 5 18:33:04 2007 +0800
402 [Blackfin][PATCH] Fix dynamic CPLB generation issue
404 commit 0445e3a264251d75b1be45ef713c70726a2952f0
405 Author: Aubrey Li <aubrey.adi@gmail.com>
406 Date: Thu Apr 5 18:31:47 2007 +0800
408 [Blackfin][PATCH] minior cleanup
410 commit 155fd766573981090e638b493d5857562151862e
411 Author: Aubrey Li <aubrey.adi@gmail.com>
412 Date: Thu Apr 5 18:31:18 2007 +0800
414 [Blackfin][PATCH] Fix copyright and update license
416 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
417 Author: Aubrey Li <aubrey.adi@gmail.com>
418 Date: Thu Apr 5 18:30:25 2007 +0800
420 [Blackfin][PATCH] Add BF537 EMAC driver initialization
422 commit 889256e8604e0c68db1d866d720894dffede9df6
423 Author: Aubrey Li <aubrey.adi@gmail.com>
424 Date: Thu Apr 5 18:29:55 2007 +0800
426 [Blackfin][PATCH] call real the system synchronize instruction
428 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
429 Author: Aubrey Li <aubrey.adi@gmail.com>
430 Date: Thu Apr 5 18:29:17 2007 +0800
432 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
434 commit dfeeab2cd680df047e68e723b246adf6f33bb556
435 Author: Aubrey Li <aubrey.adi@gmail.com>
436 Date: Thu Apr 5 18:28:34 2007 +0800
438 [Blackfin][PATCH]: fix flash unaligned copy issue
440 commit 443feb740584e406efa203af909fe2926608e8d5
441 Author: Igor Marnat <marny@rambler.ru>
442 Date: Wed Mar 21 09:55:01 2007 +0300
444 Update usage of 'nc' in README.NetConsole
446 Added information about usage of NetConsole on systems where the -l and -p
447 switches are mutually exclusive.
449 Signed-off-by: Igor Marnat <marny@rambler.ru>
450 Signed-off-by: Ben Warren <bwarren@qstreams.com>
452 commit 31c98a88228021b314c89ebb8104fb6473da4471
453 Author: Wolfgang Denk <wd@denx.de>
454 Date: Wed Apr 4 02:09:30 2007 +0200
456 Minor coding style cleanup.
458 commit 94abd7c0583ebe01e799b25f451201deeaab550d
459 Author: Wolfgang Denk <wd@denx.de>
460 Date: Wed Apr 4 01:49:15 2007 +0200
464 commit a65c5768e5537530bd1780af3d3fddc3113a163c
465 Author: Stefan Roese <sr@denx.de>
466 Date: Mon Apr 2 10:09:30 2007 +0200
468 ppc4xx: Change SysACE address on Katmai
470 With this new base address of the Xilinx SystemACE controller
471 the Linux driver will be easier to adapt, since it can now be
472 mapped via the "normal" ioremap() call.
474 Signed-off-by: Stefan Roese <sr@denx.de>
476 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
477 Author: Gerald Van Baren <vanbaren@cideas.com>
478 Date: Sat Mar 31 14:30:53 2007 -0400
480 Fix some minor whitespace violations.
482 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
483 Author: Gerald Van Baren <vanbaren@cideas.com>
484 Date: Sat Mar 31 12:23:51 2007 -0400
486 Add a flattened device tree (fdt) command (2 of 2)
488 Modifications to the existing code to support the new fdt command.
490 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
491 Author: Gerald Van Baren <vanbaren@cideas.com>
492 Date: Sat Mar 31 12:22:10 2007 -0400
494 Add a flattened device tree (fdt) command (1 of 2)
496 The fdt command uses David Gibson's libfdt library to manipulate as well
497 as print the flattened device tree. This patch is the new command,
498 the second part is the modifications to the existing code.
500 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
501 Author: Gerald Van Baren <vanbaren@cideas.com>
502 Date: Sat Mar 31 12:13:43 2007 -0400
504 libfdt: Enhanced and published fdt_next_tag()
506 Enhanced the formerly private function _fdt_next_tag() to allow stepping
507 through the tree, used to produce a human-readable dump, and made
508 it part of the published interface.
509 Also added some comments.
511 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
512 Author: Gerald Van Baren <vanbaren@cideas.com>
513 Date: Sat Mar 31 12:05:39 2007 -0400
515 libfdt: Customizations for use by u-boot.
517 Changes to David Gibson's original source to fit into u-boot's
518 environment. No functionality changes.
520 commit 35748177c64a4a83a00057e93bb33e40278a2a96
521 Author: Gerald Van Baren <vanbaren@cideas.com>
522 Date: Sat Mar 31 12:00:56 2007 -0400
524 libfdt: Import libfdt source (2 of 2)
526 This adds the applicable libfdt source files (unmodified) and a README
527 to explain where the source came from.
529 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
530 Author: Gerald Van Baren <vanbaren@cideas.com>
531 Date: Sat Mar 31 11:59:59 2007 -0400
533 libfdt: Import libfdt source (1 of 2)
535 This adds the applicable libfdt source files (unmodified) and a README
536 to explain where the source came from.
538 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
539 Author: Stefan Roese <sr@denx.de>
540 Date: Sat Mar 31 13:16:23 2007 +0200
542 ppc4xx: Update Katmai bootstrap command
544 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
547 Signed-off-by: Stefan Roese <sr@denx.de>
549 commit cabee756a6532986729477c3cc1ea16ef8517ad2
550 Author: Stefan Roese <sr@denx.de>
551 Date: Sat Mar 31 13:15:06 2007 +0200
553 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
555 Additional RAM information is now printed upon powerup, like
556 DDR2 frequency and CAS latency.
558 Signed-off-by: Stefan Roese <sr@denx.de>
560 commit 60723803431ac75cad085690789e433d5ab9174e
561 Author: Stefan Roese <sr@denx.de>
562 Date: Sat Mar 31 08:48:36 2007 +0200
564 ppc4xx: Change Yucca config file to support ECC
566 With the updated 44x DDR2 driver the Yucca board now supports
567 ECC generation and checking.
569 Signed-off-by: Stefan Roese <sr@denx.de>
571 commit 490e5730c674b20d708b783a2c5ffd7208f83873
572 Author: Stefan Roese <sr@denx.de>
573 Date: Sat Mar 31 08:47:34 2007 +0200
575 ppc4xx: Fix "bootstrap" command for Katmai board
577 The board specific "bootstrap" command is now fixed and can
578 be used for the AMCC Katmai board to configure different
579 CPU/PLB/OPB frequencies.
581 Signed-off-by: Stefan Roese <sr@denx.de>
583 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
584 Author: Stefan Roese <sr@denx.de>
585 Date: Sat Mar 31 08:46:08 2007 +0200
587 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
589 Fix a bug in the auto calibration routine. This driver now runs
590 more reliable with the tested modules. It's also tested with
591 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
593 Signed-off-by: Stefan Roese <sr@denx.de>
595 commit 342cd097be1e7affe82f42ab3da220959a699e64
596 Author: Michal Simek <monstr@monstr.eu>
597 Date: Fri Mar 30 22:52:09 2007 +0200
599 [PATCH] Clean include dependence
601 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
602 Author: Michal Simek <monstr@monstr.eu>
603 Date: Fri Mar 30 22:42:45 2007 +0200
605 [CLEAN] Remove inefficient Suzaku code
607 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
608 Author: Stefan Roese <sr@denx.de>
609 Date: Wed Mar 28 15:03:16 2007 +0200
611 Merge some AMCC make targets to keep the top-level Makefile smaller
613 Signed-off-by: Stefan Roese <sr@denx.de>
615 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
616 Author: Stefan Roese <sr@denx.de>
617 Date: Wed Mar 28 14:52:12 2007 +0200
619 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
621 The "old" i2c commands (iprobe, imd...) are now compiled in again,
622 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
625 Signed-off-by: Stefan Roese <sr@denx.de>
627 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
628 Author: Michal Simek <monstr@monstr.eu>
629 Date: Tue Mar 27 00:32:16 2007 +0200
631 PATCH: Resolve GPL license problem
633 commit 1798049522f594013aea29457d46794298c6ae15
634 Author: Michal Simek <root@monstr.eu>
635 Date: Mon Mar 26 01:39:07 2007 +0200
637 Support for XUPV2P board
639 BSP autoconfig support
641 commit 0d974d5297349504a2ddfa09314be573b5df320a
642 Author: Stefan Roese <sr@denx.de>
643 Date: Sat Mar 24 15:57:09 2007 +0100
645 [PATCH] Add 4xx GPIO functions
647 This patch adds some 4xx GPIO functions. It also moves some of the
648 common code and defines into a common 4xx GPIO header file.
650 Signed-off-by: Stefan Roese <sr@denx.de>
652 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
653 Author: Stefan Roese <sr@denx.de>
654 Date: Sat Mar 24 15:55:58 2007 +0100
656 [PATCH] Small Sequoia cleanup
658 Signed-off-by: Stefan Roese <sr@denx.de>
660 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
661 Author: Stefan Roese <sr@denx.de>
662 Date: Sat Mar 24 15:45:34 2007 +0100
664 [PATCH] Clean up 40EZ/Acadia support
666 This patch cleans up all the open issue of the preliminary
669 Signed-off-by: Stefan Roese <sr@denx.de>
671 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
672 Author: Jon Loeliger <jdl@freescale.com>
673 Date: Tue Dec 12 11:02:20 2006 -0600
675 Fix 8641HPCN problem with ld version 2.16
677 (Dot outside sections problem).
679 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
681 Signed-off-by: Jon Loeliger <jdl@freescale.com>
683 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
684 Author: Haiying Wang <haiying.wang@freescale.com>
685 Date: Thu Dec 7 10:35:55 2006 -0600
687 Set Rev 2.x 86xx PIC in mixed mode.
689 Prevent false interrupt from hanging Linux as MSR[EE] is set
690 to enable interrupts by changing the PIC out of the default
691 pass through mode into mixed mode.
693 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
694 Signed-off-by: Jon Loeliger <jdl@freescale.com>
696 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
697 Author: Jason Jin <jason.jin@freescale.com>
698 Date: Thu Dec 7 10:32:35 2006 -0600
700 Add flash cmd function to 8641HPCN ramboot
702 Also fixes some commmand for 8641 HPCN ramboot case.
704 Signed-off-by: Jason Jin <jason.jin@freescale.com>
705 Signed-off-by: Jon Loeliger <jdl@freescale.com>
707 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
708 Author: Ed Swarthout <ed.swarthout@freescale.com>
709 Date: Thu Dec 7 10:34:14 2006 -0600
711 Add support for 8641 Rev 2 silicon.
713 Without this patch, I am unable to get to the prompt on rev 2 silicon.
714 Only set ddrioovcr for rev1.
716 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
717 Signed-off-by: Jon Loeliger <jdl@freescale.com>
719 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
720 Author: Wolfgang Denk <wd@denx.de>
721 Date: Thu Mar 22 00:13:12 2007 +0100
723 Code cleanup / re-insert previous Copyright entries.
725 Signed-off-by: Wolfgang Denk <wd@denx.de>
727 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
728 Author: Wolfgang Denk <wd@denx.de>
729 Date: Wed Mar 21 23:26:15 2007 +0100
731 Code cleanup. Update CHANGELOG
733 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
734 Author: Stefan Roese <sr@denx.de>
735 Date: Wed Mar 21 14:54:29 2007 +0100
737 ppc4xx: Fix file mode of include/configs/acadia.h
739 Signed-off-by: Stefan Roese <sr@denx.de>
741 commit d5f4614c9350d9333e575100fb250aab774d0258
742 Author: Markus Klotzbuecher <mk@denx.de>
743 Date: Wed Mar 21 14:41:46 2007 +0100
745 SPC1920: fix small clock routing bug
747 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
749 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
750 Author: Stefan Roese <sr@denx.de>
751 Date: Wed Mar 21 13:39:57 2007 +0100
753 [PATCH] Add AMCC Acadia (405EZ) eval board support
755 This patch adds support for the new AMCC Acadia eval board.
757 Please note that this Acadia/405EZ support is still in a beta stage.
758 Still lot's of cleanup needed but we need a preliminary release now.
760 Signed-off-by: Stefan Roese <sr@denx.de>
762 commit e01bd218b00af73499331a1a701625a852cd286f
763 Author: Stefan Roese <sr@denx.de>
764 Date: Wed Mar 21 13:38:59 2007 +0100
766 [PATCH] Add AMCC PPC405EZ support
768 This patch adds support for the new AMCC 405EZ PPC. It is in
769 preparation for the AMCC Acadia board support.
771 Please note that this Acadia/405EZ support is still in a beta stage.
772 Still lot's of cleanup needed but we need a preliminary release now.
774 Signed-off-by: Stefan Roese <sr@denx.de>
776 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
777 Author: Heiko Schocher <hs@pollux.denx.de>
778 Date: Wed Mar 21 08:45:17 2007 +0100
780 [PATCH] TQM8272: dont change the bits given from the HRCW
781 for the SIUMCR and BCR Register.
782 Fix the calculation for the EEprom Size
784 Signed-off-by: Heiko Schocher <hs@denx.de>
786 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
787 Author: Aubrey Li <aubrey.adi@gmail.com>
788 Date: Tue Mar 20 18:16:24 2007 +0800
790 [Blackfin][PATCH] Add BF561 EZKIT board support
792 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
793 Author: Aubrey Li <aubrey.adi@gmail.com>
794 Date: Mon Mar 19 22:55:58 2007 +0800
796 [Blackfin][PATCH] minor cleanup
798 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
799 Author: Wolfgang Denk <wd@denx.de>
800 Date: Mon Mar 19 13:10:08 2007 +0100
802 Remove obsoleted POST files.
804 Signed-off-by: Wolfgang Denk <wd@denx.de>
806 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
807 Author: Aubrey Li <aubrey.adi@gmail.com>
808 Date: Mon Mar 19 01:26:11 2007 +0800
810 [PATCH] Add flash chip M29W320ET/B support
812 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
813 Author: Aubrey Li <aubrey.adi@gmail.com>
814 Date: Mon Mar 19 01:24:52 2007 +0800
816 [Blackfin][PATCH] Add BF537 stamp board support
818 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
819 Author: Stefan Roese <sr@denx.de>
820 Date: Fri Mar 16 21:11:42 2007 +0100
822 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
824 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
825 DDR memory are dynamically programmed matching the total size
826 of the equipped memory (DIMM modules).
828 Signed-off-by: Stefan Roese <sr@denx.de>
830 commit 76d1466f918b881cda2d259254761e73885093c2
831 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
832 Date: Tue Mar 13 13:38:05 2007 +0100
834 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
835 boards in terms of unification.
837 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
839 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
840 Author: Wolfgang Denk <wd@denx.de>
841 Date: Tue Mar 13 16:05:55 2007 +0100
843 Make SC3 board build with 'make O='; use 'addcons' consistently
844 (SC3 and Jupiter used to use 'addcon' instead).
846 Signed-off-by: Wolfgang Denk wd@denx.de
848 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
849 Author: Heiko Schocher <hs@pollux.denx.de>
850 Date: Tue Mar 13 09:40:59 2007 +0100
852 [PATCH] update board config for jupiter Board:
854 CONFIG_CMDLINE_EDITING,
855 CFG_ENV_ADDR_REDUND activated
857 Signed-off-by: Heiko Schocher <hs@denx.de>
859 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
860 Author: Aubrey Li <aubrey.adi@gmail.com>
861 Date: Mon Mar 12 12:11:55 2007 +0800
863 [Blackfin][PATCH] minor cleanup
865 commit bfa5754a58477ac917d21527cd0f079d87cf188e
866 Author: Aubrey Li <aubrey.adi@gmail.com>
867 Date: Mon Mar 12 01:42:06 2007 +0800
869 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
871 commit 8440bb14581a294375c34b91b42512f9753d1130
872 Author: Aubrey Li <aubrey.adi@gmail.com>
873 Date: Mon Mar 12 00:25:14 2007 +0800
875 [Blackfin][PATCH] code cleanup
877 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
878 Author: Michal Simek <monstr@monstr.eu>
879 Date: Sun Mar 11 13:48:24 2007 +0100
881 [Microblaze][PATCH] part 2
883 interrupt controller support
887 board information support
889 booting image support
891 adding support for Xilinx ML401
893 commit 76316a318de91f6184e7c22a10e02d275ade2441
894 Author: Michal Simek <monstr@monstr.eu>
895 Date: Sun Mar 11 13:42:58 2007 +0100
899 interrupt controller support
903 board information support
905 booting image support
907 adding support for Xilinx ML401
909 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
910 Author: Aubrey Li <aubrey.adi@gmail.com>
911 Date: Sat Mar 10 23:49:29 2007 +0800
913 [Blackfin][PATCH] code cleanup
915 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
916 Author: Aubrey.Li <aubrey.adi@gmail.com>
917 Date: Fri Mar 9 13:40:56 2007 +0800
919 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
921 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
922 Author: Aubrey.Li <aubrey.adi@gmail.com>
923 Date: Fri Mar 9 13:38:44 2007 +0800
925 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
927 commit 992423ab43c2bcf6b704853bd00af77450915e20
928 Author: Stefan Roese <sr@denx.de>
929 Date: Thu Mar 8 23:00:08 2007 +0100
931 ppc4xx: Fix file mode of sequoia.c
933 Signed-off-by: Stefan Roese <sr@denx.de>
935 commit eb92f613556800f7483666db09d9a237ad911d4a
936 Author: Wolfgang Denk <wd@pollux.denx.de>
937 Date: Thu Mar 8 22:52:51 2007 +0100
941 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
942 Author: John Otken john@softadvances.com <john@softadvances.com>
943 Date: Thu Mar 8 09:39:48 2007 -0600
945 ppc4xx: Clear Sequoia/Rainier security engine reset bits
947 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
949 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
950 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
951 Date: Thu Mar 8 16:26:52 2007 +0100
953 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
955 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
957 commit d9fc703246840c4b268debf48c334ba55c597dc0
958 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
959 Date: Thu Mar 8 16:25:47 2007 +0100
961 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
963 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
965 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
966 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
967 Date: Thu Mar 8 16:23:11 2007 +0100
969 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
971 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
973 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
974 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
975 Date: Thu Mar 8 16:20:32 2007 +0100
977 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
979 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
981 commit f9fc6a5852a6335840882fa2111925010eea1abe
982 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
983 Date: Wed Mar 7 15:32:01 2007 +0100
985 fixed ethernet phy configuration for plu405 board
987 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
989 commit 769104c9356594deb2092e204a39c05b33202d6c
990 Author: Wolfgang Denk <wd@pollux.denx.de>
991 Date: Thu Mar 8 21:49:27 2007 +0100
995 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
996 Author: Stefan Roese <sr@denx.de>
997 Date: Thu Mar 8 10:13:16 2007 +0100
999 [PATCH] Update AMCC Luan 440SP eval board support
1001 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
1002 inititializition. This includes DDR auto calibration and support
1003 for different DIMM modules, instead of the fixed setup used in
1004 the earlier version.
1006 This patch also enables the cache in FLASH for the startup
1007 phase of U-Boot (while running from FLASH). After relocating to
1008 SDRAM the cache is disabled again. This will speed up the boot
1009 process, especially the SDRAM setup, since there are some loops
1010 for memory testing (auto calibration).
1012 Signed-off-by: Stefan Roese <sr@denx.de>
1014 commit 2f5df47351910a2936c7741cf111855829200943
1015 Author: Stefan Roese <sr@denx.de>
1016 Date: Thu Mar 8 10:10:18 2007 +0100
1018 [PATCH] Update AMCC Yucca 440SPe eval board support
1020 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
1021 inititializition. This includes DDR auto calibration and support
1022 for different DIMM modules, instead of the fixed setup used in
1023 the earlier version.
1025 Signed-off-by: Stefan Roese <sr@denx.de>
1027 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
1028 Author: Stefan Roese <sr@denx.de>
1029 Date: Thu Mar 8 10:07:18 2007 +0100
1031 ppc4xx: Small AMCC Katmai 440SPe update
1033 Signed-off-by: Stefan Roese <sr@denx.de>
1035 commit df294497479b1dca6dd86318b2a912f72fede0df
1036 Author: Stefan Roese <sr@denx.de>
1037 Date: Thu Mar 8 10:06:09 2007 +0100
1039 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
1041 Signed-off-by: Stefan Roese <sr@denx.de>
1043 commit 83853178bd36bca6f0f8f1331476620c84a587fc
1044 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1045 Date: Wed Mar 7 12:14:50 2007 -0600
1047 net - Support ping reply when processing net-loop
1049 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
1051 This permits the ping command to test the phy interface when the phy
1052 is put in loopback mode (typically by setting register 0 bit 14).
1054 It also allows the port to respond to an external ping when u-boot is
1055 processing some other net command (such as tftp). This is useful when
1056 tftp appears to hang.
1058 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1059 Signed-off-by: Ben Warren <bwarren@qstreams.com>
1061 commit fa1aef15bcd47736687be1af544506e90fba545d
1062 Author: Stefan Roese <sr@denx.de>
1063 Date: Wed Mar 7 16:43:00 2007 +0100
1065 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
1067 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
1068 DDR memory are dynamically programmed matching the total size
1069 of the equipped memory (DIMM modules).
1071 Signed-off-by: Stefan Roese <sr@denx.de>
1073 commit e2ebe696818939e2b974628be9c921ea3fe9de13
1074 Author: Stefan Roese <sr@denx.de>
1075 Date: Wed Mar 7 16:39:36 2007 +0100
1077 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
1079 This patch fixes a problem that occurs when 2 DIMM's are
1080 used. This problem was first spotted and fixed by Gerald Jackson
1081 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
1082 problem in a little more clever way.
1084 This patch also adds the nice functionality to dynamically
1085 create the TLB entries for the SDRAM (tlb.c). So we should
1086 never run into such problems with wrong (too short) TLB
1087 initialization again on these platforms.
1089 As this feature is new to the "old" 44x SPD DDR driver, it
1090 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
1092 Signed-off-by: Stefan Roese <sr@denx.de>
1094 commit 39218433983417b9df087976a79e3f80dd5e83d6
1095 Author: Wolfgang Denk <wd@denx.de>
1096 Date: Wed Mar 7 16:33:44 2007 +0100
1098 UC101: fix compiler warnings
1100 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
1101 Author: Wolfgang Denk <wd@pollux.denx.de>
1102 Date: Wed Mar 7 16:19:46 2007 +0100
1104 HMI1001: fix build error, cleanup compiler warnings.
1106 commit ad5bb451ade552c44bef9119d907929ebc2c126f
1107 Author: Wolfgang Denk <wd@pollux.denx.de>
1108 Date: Tue Mar 6 18:08:43 2007 +0100
1110 Restructure POST directory to support of other CPUs, boards, etc.
1112 commit a5284efd125967675b2e9c6ef7b95832268ad360
1113 Author: Wolfgang Denk <wd@pollux.denx.de>
1114 Date: Tue Mar 6 18:01:47 2007 +0100
1116 Fix HOSTARCH handling.
1117 Patch by Mike Frysinger, Mar 05 2007
1119 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
1120 Author: Stefan Roese <sr@denx.de>
1121 Date: Tue Mar 6 07:47:04 2007 +0100
1123 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
1125 As provided by the AMCC applications team, this patch optimizes the
1126 DDR2 setup for 166MHz bus speed. The values provided are also save
1127 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
1128 setup has to be adjusted as done in this patch.
1130 For this the NAND booting version had to include the "speed.c" file
1131 from the cpu/ppc4xx directory. With this addition the NAND SPL image
1132 will just fit into the 4kbytes of program space. gcc version 4.x as
1133 provided with ELDK 4.x is needed to generate this optimized code.
1135 Signed-off-by: Stefan Roese <sr@denx.de>
1137 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
1138 Author: Wolfgang Denk <wd@pollux.denx.de>
1139 Date: Sun Mar 4 01:36:05 2007 +0100
1143 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
1144 Author: Kim Phillips <kim.phillips@freescale.com>
1145 Date: Wed Feb 28 00:02:04 2007 -0600
1147 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
1149 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
1151 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
1152 Author: Kumar Gala <galak@kernel.crashing.org>
1153 Date: Tue Feb 27 23:51:42 2007 -0600
1155 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
1157 The config value for:
1165 Were not being used when setting the appropriate register
1173 To allow full config of the SCCR.
1175 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
1176 that were just bogus.
1178 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1180 commit d51b3cf371cd441030460ef19d36b2924c361b1a
1181 Author: Kim Phillips <kim.phillips@freescale.com>
1182 Date: Thu Feb 22 20:06:57 2007 -0600
1184 mpc83xx: update [local-]mac-address properties on UEC based devices
1186 8360 and 832x weren't updating their [local-]mac-address
1187 properties. This patch fixes that.
1189 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1191 commit 61f4f912acbe60776c5e00df1ec94094ce672957
1192 Author: Timur Tabi <timur@freescale.com>
1193 Date: Tue Feb 13 10:41:42 2007 -0600
1195 mpc83xx: write MAC address to mac-address and local-mac-address
1197 Some device trees have a mac-address property, some have local-mac-address,
1198 and some have both. To support all of these device trees, this patch
1199 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
1200 This function already updates local-mac-address.
1202 Signed-off-by: Timur Tabi <timur@freescale.com>
1204 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
1205 Author: Kim Phillips <kim.phillips@freescale.com>
1206 Date: Tue Feb 27 18:41:08 2007 -0600
1208 mpc83xx: add command line editing by default
1210 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
1211 Author: Kim Phillips <kim.phillips@freescale.com>
1212 Date: Wed Feb 14 19:50:53 2007 -0600
1214 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
1216 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
1217 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
1219 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
1221 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1222 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
1224 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
1225 Author: Xie Xiaobo <r63061@freescale.com>
1226 Date: Wed Feb 14 18:27:17 2007 +0800
1228 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
1230 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
1231 it pass DDR/DDR2 compliance tests.
1233 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
1235 commit b110f40bd180c6b560276589beedf753e97c46ce
1236 Author: Xie Xiaobo <r63061@freescale.com>
1237 Date: Wed Feb 14 18:27:06 2007 +0800
1239 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
1241 MPC8360E rev2.0 have new spridr,and PVR value,
1242 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
1244 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
1246 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
1247 Author: Xie Xiaobo <r63061@freescale.com>
1248 Date: Wed Feb 14 18:26:44 2007 +0800
1250 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
1252 MPC8349E rev3.1 have new spridr,and PVR value,
1253 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
1255 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
1257 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
1258 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
1259 Date: Wed Jan 31 11:04:19 2007 +0100
1261 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
1263 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
1264 which is used to se if an slave will ACK after receiving its address.
1266 Correct i2c probing to use this method as the old method could upset
1267 a slave as it wrote a data byte to it.
1269 Add a small delay in i2c_init() to let the controller
1270 shutdown any ongoing I2C activity.
1272 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1274 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
1275 Author: Timur Tabi <timur@freescale.com>
1276 Date: Wed Jan 31 15:54:29 2007 -0600
1278 mpc83xx: Add support for the MPC8349E-mITX-GP
1280 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
1281 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
1282 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
1284 Signed-off-by: Timur Tabi <timur@freescale.com>
1286 commit fab16807adad350f618024350c6950165c247c72
1287 Author: Timur Tabi <timur@freescale.com>
1288 Date: Wed Jan 31 15:54:20 2007 -0600
1290 mpc83xx: Delete sdram_init() for MPC8349E-mITX
1292 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
1293 never does anything. This patch deletes it.
1295 Signed-off-by: Timur Tabi <timur@freescale.com>
1297 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
1298 Author: Dave Liu <daveliu@freescale.com>
1299 Date: Fri Jan 19 10:43:26 2007 +0800
1301 mpc83xx: Fix the LAW1/3 bug
1303 The patch solves the alignment problem of the local bus access windows to
1304 render accessible the memory bank and PHY registers of UPC 1 (starting at
1305 0xf801 0000). What we actually did was to adjust the sizes of the bus
1306 access windows so that the base address alignment requirement would be met.
1308 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
1309 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
1310 Signed-off-by: Dave Liu <daveliu@freescale.com>
1312 commit 97c4b397dce236a7318b304667bf89e59d08b17c
1313 Author: Kim Phillips <kim.phillips@freescale.com>
1314 Date: Tue Jan 30 16:15:31 2007 -0600
1316 mpc83xx: don't hang if watchdog configured on 8360, 832x
1318 don't hang if watchdog configured on 8360, 832x
1320 The watchdog programming model is the same across all 83xx devices;
1321 make the code reflect that.
1323 commit b70047478570e371ce7223be342ce98afea0f7d6
1324 Author: Kim Phillips <kim.phillips@freescale.com>
1325 Date: Tue Jan 30 16:15:21 2007 -0600
1327 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
1329 protect memcpy to bad address if a local-mac-address is missing from dt
1331 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
1332 Author: Kim Phillips <kim.phillips@freescale.com>
1333 Date: Tue Jan 30 16:15:04 2007 -0600
1335 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
1337 make 8360 default environment fdt be 8360 (not 8349)
1339 commit a28899c910024a0226331df07207b1038c300c93
1340 Author: Emilian Medve <Emilian.Medve@freescale.com>
1341 Date: Tue Jan 30 16:14:50 2007 -0600
1343 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
1345 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
1346 be used for busy-waiting since it strips the 'volatile' property from
1347 the bd variable. gcc3 was working by pure luck.
1349 This is a follow on patch to "Fix the UEC driver bug of QE"
1351 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
1352 Author: Kumar Gala <galak@kernel.crashing.org>
1353 Date: Tue Jan 30 14:08:30 2007 -0600
1355 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
1357 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
1358 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
1359 CONFIG_MPC834X so they are more generic.
1361 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1363 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
1364 Author: Kim Phillips <kim.phillips@freescale.com>
1365 Date: Thu Jan 25 13:40:55 2007 -0600
1367 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
1369 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
1370 Author: Kim Phillips <kim.phillips@freescale.com>
1371 Date: Wed Jan 24 17:18:37 2007 -0600
1373 mpc83xx: sort Makefile targets
1375 reordered targets alphabetically
1377 commit 91e25769771c1164ed63ffca0add49f934ae3343
1378 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
1379 Date: Tue Jan 16 11:38:14 2007 -0500
1381 mpc83xx: U-Boot support for Wind River SBC8349
1383 I've redone the SBC8349 support to match git-current, which
1384 incorporates all the MPC834x updates from Freescale since the 1.1.6
1385 release, including the DDR changes.
1387 I've kept all the SBC8349 files as parallel as possible to the
1388 MPC8349EMDS ones for ease of maintenance and to allow for easy
1389 inspection of what was changed to support this board. Hence the SBC8349
1390 U-Boot has FDT support and everything else that the MPC8349EMDS has.
1392 Fortunately the Freescale updates added support for boards using CS0,
1393 but I had to change spd_sdram.c to allow for board specific settings for
1394 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
1395 default if the board doesn't specify a value.)
1397 Hopefully this should be mergeable as-is and require no whitespace
1398 cleanups or similar, but if something doesn't measure up then let me
1399 know and I'll fix it.
1404 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
1405 Author: Sam Song <samsongshu@yahoo.com.cn>
1406 Date: Thu Dec 14 19:03:21 2006 +0800
1408 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
1410 A redundant semicolon existed in mpc8349itx.c
1413 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
1415 commit f35f358241c549be3f75cfe2eaa642914275b7ba
1416 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
1417 Date: Wed Dec 6 21:23:55 2006 -0500
1419 mpc83xx: Put the version (and magic) after the HRCW.
1421 Put the version (and magic) after the HRCW. This puts it in a fixed
1422 location in flash, not at the start of flash but as close as we can get.
1424 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
1426 commit 48aecd969171a6e99a55fae04933857787f9a5bd
1427 Author: Dave Liu <r63238@freescale.com>
1428 Date: Thu Dec 7 21:14:51 2006 +0800
1430 mpc83xx: Add the MPC832XEMDS board readme
1432 Add the MPC832XEMDS board readme
1434 Signed-off-by: Dave Liu <daveliu@freescale.com>
1436 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
1437 Author: Dave Liu <r63238@freescale.com>
1438 Date: Thu Dec 7 21:13:15 2006 +0800
1440 mpc83xx: Add support for the MPC832XEMDS board
1442 This patch supports DUART, ETH3/4 and PCI etc.
1444 Signed-off-by: Dave Liu <daveliu@freescale.com>
1446 commit e080313c32322e15ab5a18eb896a252858c57284
1447 Author: Dave Liu <r63238@freescale.com>
1448 Date: Thu Dec 7 21:11:58 2006 +0800
1450 mpc83xx: streamline the 83xx immr head file
1452 For better format and style, I streamlined the 83xx head files,
1453 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
1454 duplicated macro definition appear in the both files; 2) the structure
1455 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
1456 macro definition put inside the each structure. So, I cleaned up the
1457 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
1458 moved the macro definition to mpc83xx.h, Just like MPC8260.
1462 *streamline the 83xx immr head file
1464 Signed-off-by: Dave Liu <daveliu@freescale.com>
1466 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
1467 Author: Dave Liu <r63238@freescale.com>
1468 Date: Wed Dec 6 11:38:17 2006 +0800
1470 mpc83xx: Fix the UEC driver bug of QE
1472 The patch prevents the GCC tool chain from striping useful code for
1473 optimization. It will make UEC ethernet driver workable, Otherwise the
1474 UEC will fail in tx when you are using gcc4.x. but the driver can work
1475 when using gcc3.4.3.
1479 *Prevent the GCC from striping code for optimization, Otherwise the UEC
1480 will tx failed when you are using gcc4.x.
1482 Signed-off-by: Dave Liu <daveliu@freescale.com>
1484 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
1485 Author: Stefan Roese <sr@denx.de>
1486 Date: Thu Mar 1 21:11:36 2007 +0100
1488 [PATCH] Update AMCC Katmai 440SPe eval board support
1490 This patch updates the recently added Katmai board support. The biggest
1491 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
1494 Please note, that still some problems are left with some memory
1495 configurations. See the driver for more details.
1497 Signed-off-by: Stefan Roese <sr@denx.de>
1499 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
1500 Author: Stefan Roese <sr@denx.de>
1501 Date: Thu Mar 1 07:03:25 2007 +0100
1503 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
1505 Signed-off-by: Stefan Roese <sr@denx.de>
1507 commit ccbc7036648e465697ca298ba51e0e76dda352a0
1508 Author: Wolfgang Denk <wd@pollux.denx.de>
1509 Date: Wed Feb 28 01:28:53 2007 +0100
1511 SC3: fix typo in default environment
1513 commit e344568b1b46af85ec32d815586f91bc115d6223
1514 Author: Sergei Poselenov <sposelenov@emcraft.com>
1515 Date: Tue Feb 27 20:15:30 2007 +0300
1517 MCC200: Fixes for update procedure
1519 - fix logic error in image type handling
1520 - make sure file system images (cramfs etc.) get stored in flash
1521 with image header stripped so they can be mounted through MTD
1523 commit 743571145b37182757d4e688a77860b36ee77573
1524 Author: Wolfgang Denk <wd@pollux.denx.de>
1525 Date: Tue Feb 27 14:26:04 2007 +0100
1529 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
1530 Author: Sergei Poselenov <sposelenov@emcraft.com>
1531 Date: Tue Feb 27 12:40:16 2007 +0300
1533 MCC200 update - add LCD Progress Indicator
1535 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
1536 Author: Stefan Roese <sr@denx.de>
1537 Date: Thu Feb 22 07:43:34 2007 +0100
1539 [PATCH] get_dev() now unconditionally uses manual relocation
1541 Since the relocation fix is not included yet and we're not sure how
1542 it will be added, this patch removes code that required relocation
1543 to be fixed for now.
1545 Signed-off-by: Stefan Roese <sr@denx.de>
1547 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
1548 Author: Stefan Roese <sr@denx.de>
1549 Date: Thu Feb 22 07:40:23 2007 +0100
1551 [PATCH] Change systemace driver to select 8 & 16bit mode
1553 As suggested by Grant Likely this patch enables the Xilinx SystemACE
1554 driver to select 8 or 16bit mode upon startup.
1556 Signed-off-by: Stefan Roese <sr@denx.de>
1558 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
1559 Author: Haiying Wang <Haiying.Wang@freescale.com>
1560 Date: Wed Feb 21 16:52:31 2007 +0100
1562 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
1564 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
1565 is fully finished. The sync() is defined in each CPU's io.h file. For
1566 those CPUs which do not need sync for now, a dummy sync() is defined in
1569 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1571 commit da04995c7dc6772013a9a0dc5c767f190c402478
1572 Author: Stefan Roese <sr@denx.de>
1573 Date: Wed Feb 21 13:44:34 2007 +0100
1575 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
1577 Signed-off-by: Stefan Roese <sr@denx.de>
1579 commit 751bb57107d78978ae08e697c3deba816f5be091
1580 Author: Stefan Roese <sr@denx.de>
1581 Date: Tue Feb 20 13:21:57 2007 +0100
1583 [PATCH] Fix relocation problem with "new" get_dev() function
1585 This patch enables the "new" get_dev() function for block devices
1586 introduced by Grant Likely to be used on systems that still suffer
1587 from the relocation problems (manual relocation neede because of
1588 problems with linker script).
1590 Hopefully we can resolve this relocation issue soon for all platform
1591 so we don't need this additional code anymore.
1593 Signed-off-by: Stefan Roese <sr@denx.de>
1595 commit d93e2212f962668b3dce091ff5edc33f2347fe37
1596 Author: Stefan Roese <sr@denx.de>
1597 Date: Tue Feb 20 13:17:42 2007 +0100
1599 [PATCH] Update SystemACE driver for 16bit access
1601 This patch removes some problems when the Xilinx SystemACE driver
1602 is used with 16bit access on an big endian platform (like the
1605 Signed-off-by: Stefan Roese <sr@denx.de>
1607 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
1608 Author: Stefan Roese <sr@denx.de>
1609 Date: Tue Feb 20 13:15:40 2007 +0100
1611 [PATCH] Clean up Katmai (440SPe) linker script
1613 Signed-off-by: Stefan Roese <sr@denx.de>
1615 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
1616 Author: Stefan Roese <sr@denx.de>
1617 Date: Tue Feb 20 10:57:08 2007 +0100
1619 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
1621 Signed-off-by: Stefan Roese <sr@denx.de>
1623 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
1624 Author: Stefan Roese <sr@denx.de>
1625 Date: Tue Feb 20 10:51:26 2007 +0100
1627 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
1629 This patch switches to the desired I2C bus when the date/dtt
1630 commands are called. This can be configured using the
1631 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
1633 Signed-off-by: Stefan Roese <sr@denx.de>
1635 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
1636 Author: Stefan Roese <sr@denx.de>
1637 Date: Tue Feb 20 10:43:34 2007 +0100
1639 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
1641 This patch adds support for the DDR2 controller used on the
1642 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
1643 board and works fine with the following DIMM modules:
1645 - Corsair CM2X512-5400C4 (512MByte per DIMM)
1646 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
1647 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
1649 This patch also adds the nice functionality to dynamically
1650 create the TLB entries for the SDRAM (tlb.c). So we should
1651 never run into such problems with wrong (too short) TLB
1652 initialization again on these platforms.
1654 Signed-off-by: Stefan Roese <sr@denx.de>
1656 commit 36d830c9830379045f5daa9f542ac1c990c70068
1657 Author: Stefan Roese <sr@denx.de>
1658 Date: Tue Feb 20 10:35:42 2007 +0100
1660 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
1662 Since the existing 4xx SPD SDRAM initialization routines for the
1663 405 SDRAM controller and the 440 DDR controller don't have much in
1664 common this patch splits both drivers into different files.
1666 This is in preparation for the 440 DDR2 controller support (440SP/e).
1668 Signed-off-by: Stefan Roese <sr@denx.de>
1670 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
1671 Author: Stefan Roese <sr@denx.de>
1672 Date: Tue Feb 20 10:27:08 2007 +0100
1674 [PATCH] PPC4xx: Add support for multiple I2C busses
1676 This patch adds support for multiple I2C busses on the PPC4xx
1677 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
1678 to make use of this feature.
1680 It also merges the 405 and 440 i2c header files into one common
1683 Also the 4xx i2c reset procedure is reworked since I experienced
1684 some problems with the first access on the 440SPe Katmai board.
1686 Signed-off-by: Stefan Roese <sr@denx.de>
1688 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
1689 Author: Grant Likely <grant.likely@secretlab.ca>
1690 Date: Tue Feb 20 09:05:45 2007 +0100
1692 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
1694 Block device read/write is anonymous data; there is no need to use a
1695 typed pointer. void * is fine. Also add a hook for block_read functions
1697 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1699 commit 53758fa20e935cc87eeb0519ed365df753a6f289
1700 Author: Grant Likely <grant.likely@secretlab.ca>
1701 Date: Tue Feb 20 09:05:38 2007 +0100
1703 [PATCH 8_9] Add block_write hook to block_dev_desc_t
1705 Preparation for future patches which support block device writing
1707 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1709 commit f4852ebe6ca946a509667eb68be42026f837be76
1710 Author: Grant Likely <grant.likely@secretlab.ca>
1711 Date: Tue Feb 20 09:05:31 2007 +0100
1713 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
1715 Register read/write does not need to be wrapped in a full function. The
1716 patch replaces them with macros.
1718 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1720 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
1721 Author: Grant Likely <grant.likely@secretlab.ca>
1722 Date: Tue Feb 20 09:05:23 2007 +0100
1724 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
1726 The code in this file is not a command; it is a device driver. Put it in
1727 the correct place. There are zero functional changes in this patch, it
1728 only moves the file.
1730 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1732 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
1733 Author: Grant Likely <grant.likely@secretlab.ca>
1734 Date: Tue Feb 20 09:05:16 2007 +0100
1736 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
1738 This patch is in preparation of additional changes to the sysace driver.
1739 May as well take this opportunity to fixup the inconsistent whitespace since
1740 this file is about to undergo major changes anyway.
1742 There are zero functional changes in this patch. It only cleans up the
1745 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1747 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
1748 Author: Grant Likely <grant.likely@secretlab.ca>
1749 Date: Tue Feb 20 09:05:07 2007 +0100
1751 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
1753 isprint is already defined in ctype.c
1755 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1757 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
1758 Author: Grant Likely <grant.likely@secretlab.ca>
1759 Date: Tue Feb 20 09:05:00 2007 +0100
1761 [PATCH 3_9] Move buffer print code from md command to common function
1763 Printing a buffer is a darn useful thing. Move the buffer print code
1764 into print_buffer() in lib_generic/
1766 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1768 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
1769 Author: Grant Likely <grant.likely@secretlab.ca>
1770 Date: Tue Feb 20 09:04:52 2007 +0100
1772 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
1774 Change the xilinx device drivers and board code to include config.h
1775 instead of xparameters.h directly. config.h always includes the
1776 correct xparameters file. This change reduces the posibility of
1777 including the wrong file when adding a new xilinx board port
1779 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1781 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
1782 Author: Grant Likely <grant.likely@secretlab.ca>
1783 Date: Tue Feb 20 09:04:34 2007 +0100
1785 [PATCH 1_4] Merge common get_dev() routines for block devices
1787 Each of the filesystem drivers duplicate the get_dev routine. This change
1788 merges them into a single function in part.c
1790 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1792 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
1793 Author: Wolfgang Denk <wd@pollux.denx.de>
1794 Date: Mon Feb 19 23:09:51 2007 +0100
1796 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
1797 as root file system images.
1799 commit 489c696ae7211218961d159e43e722d74c36fcbc
1800 Author: Sergei Poselenov <sposelenov@emcraft.com>
1801 Date: Wed Feb 14 14:30:28 2007 +0300
1803 MCC200: Extensions to Software Update Mechanism
1805 Update / extend Software Update Mechanism for MCC200 board:
1807 - Add support for rootfs image added. The environment variables
1808 "rootfs_st" and "rootfs_nd" can be used to override the default
1809 values of the image start and end.
1810 - Remove excessive key check code.
1813 commit 4be23a12f23f1372634edc3215137b09768b7949
1814 Author: Stefan Roese <sr@denx.de>
1815 Date: Mon Feb 19 08:23:15 2007 +0100
1817 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
1819 As spotted by Matthias Fuchs, the READY input should not be
1820 enabled for the NOR FLASH on the Sequoia board.
1822 Signed-off-by: Stefan Roese <sr@denx.de>
1824 commit 2605e90bf676d48123afe5719a846d2b52b24aac
1825 Author: Heiko Schocher <hs@pollux.denx.de>
1826 Date: Fri Feb 16 07:57:42 2007 +0100
1828 [PATCH] Added support for the jupiter board.
1830 Signed-off-by: Heiko Schocher <hs@denx.de>
1832 commit 497d012e5be0194e1084073d0081eb1a844796b2
1833 Author: Gary Jennejohn <garyj@pollux.denx.de>
1834 Date: Mon Feb 12 13:11:50 2007 +0100
1836 LPC2292: patch from Siemens.
1838 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
1839 Author: Stefan Roese <sr@denx.de>
1840 Date: Sat Feb 10 08:49:31 2007 +0100
1842 [PATCH] Add missing p3mx.h file to repository (ups)
1844 Signed-off-by: Stefan Roese <sr@denx.de>
1846 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
1847 Author: Bartlomiej Sieka <tur@semihalf.com>
1848 Date: Fri Feb 9 10:45:42 2007 +0100
1850 [Motion-PRO] Preliminary support for the Motion-PRO board.
1852 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
1853 Author: Stefan Roese <sr@denx.de>
1854 Date: Wed Feb 7 16:51:08 2007 +0100
1856 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
1858 Some boards that can have more than 768MBytes of SDRAM need to
1859 set "initrd_high", so that the initrd can be accessed by the
1862 Signed-off-by: Stefan Roese <sr@denx.de>
1864 commit 7372ca68227930d03cffa548310524cad5b96733
1865 Author: Stefan Roese <sr@denx.de>
1866 Date: Fri Feb 2 12:44:22 2007 +0100
1868 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
1870 Previously the strapping DCR/SDR was read to determine if the internal PCI
1871 arbiter is enabled or not. This strapping bit can be overridden, so now
1872 the current status is read from the correct DCR/SDR register.
1874 Signed-off-by: Stefan Roese <sr@denx.de>
1876 commit 2aa54f651a42d198673318f07a20c89a43e4d197
1877 Author: Stefan Roese <sr@denx.de>
1878 Date: Fri Feb 2 12:42:08 2007 +0100
1880 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
1882 Signed-off-by: Stefan Roese <sr@denx.de>
1884 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
1885 Author: Stefan Roese <sr@denx.de>
1886 Date: Thu Feb 1 13:22:41 2007 +0100
1888 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
1890 When PCI PNP is enabled the pci pnp configuration routine is called
1891 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
1892 problems with some PCI cards. For now disable the PCI PNP configuration.
1894 Signed-off-by: Stefan Roese <sr@denx.de>
1896 commit 2902fadade3be7659467e8d074048c6b7068f5c0
1897 Author: Stefan Roese <sr@denx.de>
1898 Date: Wed Jan 31 16:56:10 2007 +0100
1900 [PATCH] Update 440EPx/440GRx cpu detection
1902 Signed-off-by: Stefan Roese <sr@denx.de>
1904 commit d5ea287b02a6945c3977410e364a879dd1a555c8
1905 Author: Stefan Roese <sr@denx.de>
1906 Date: Wed Jan 31 16:38:04 2007 +0100
1908 [PATCH] Update esd cpci5200 files
1910 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
1912 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
1913 Author: Stefan Roese <sr@denx.de>
1914 Date: Wed Jan 31 16:37:34 2007 +0100
1916 [PATCH] Add support for esd mecp5200 board
1918 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
1920 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
1921 Author: Stefan Roese <sr@denx.de>
1922 Date: Wed Jan 31 12:38:50 2007 +0100
1924 [PATCH] Remove unneccessary yellowstone board config file
1926 Signed-off-by: Stefan Roese <sr@denx.de>
1928 commit e802594b6fa1b166308820c276b96dc0d7cc731c
1929 Author: Stefan Roese <sr@denx.de>
1930 Date: Tue Jan 30 17:06:10 2007 +0100
1932 [PATCH] Update Sequoia (440EPx) config file
1934 The config file now handles the 2nd target, the Rainier (440GRx)
1935 evaluation board better. Additionally the PPC input clock was
1936 adjusted to match the correct value of 33.0 MHz.
1938 Signed-off-by: Stefan Roese <sr@denx.de>
1940 commit 700200c67e73b83751418abe7815840dca8fd6cb
1941 Author: Stefan Roese <sr@denx.de>
1942 Date: Tue Jan 30 17:04:19 2007 +0100
1944 [PATCH] Merge Yosemite & Yellowstone board ports
1946 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
1947 share one config file and all board specific files. This way we
1948 don't have to maintain two different sets of files for nearly
1951 Signed-off-by: Stefan Roese <sr@denx.de>
1953 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
1954 Author: Stefan Roese <sr@denx.de>
1955 Date: Tue Jan 30 15:01:49 2007 +0100
1957 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
1959 SCPU doesn't use redundant environment in flash.
1961 Signed-off-by: Stefan Roese <sr@denx.de>
1963 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
1964 Author: Stefan Roese <sr@denx.de>
1965 Date: Tue Jan 30 12:51:07 2007 +0100
1967 [PATCH] alpr: Update alpr board config file
1969 Signed-off-by: Stefan Roese <sr@denx.de>
1971 commit f8db84f132b1e335f20f96138a1f09ed97b08664
1972 Author: Wolfgang Denk <wd@pollux.denx.de>
1973 Date: Tue Jan 30 00:50:40 2007 +0100
1975 LPC2292 SODIMM port coding style cleanup.
1977 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
1978 Author: Gary Jennejohn <garyj@pollux.denx.de>
1979 Date: Wed Jan 24 12:16:56 2007 +0100
1981 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
1983 commit 2daf046ba627f85f44195815778140039636244e
1984 Author: Bartlomiej Sieka <tur@semihalf.com>
1985 Date: Tue Jan 23 17:22:06 2007 +0100
1987 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
1989 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
1990 Author: Bartlomiej Sieka <tur@semihalf.com>
1991 Date: Tue Jan 23 14:21:14 2007 +0100
1993 [iDMR] Flash driver on initialisation write-protects some sectors,
1994 currently sectors 0-3. Sector 3 does not need to be protected, though
1995 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
1996 fixes this, i.e., only sectors 0-2 are protected.
1998 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
1999 Author: Bartlomiej Sieka <tur@semihalf.com>
2000 Date: Tue Jan 23 14:11:22 2007 +0100
2002 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
2003 "mii device" results in "Unexpected exception"). Fixing this properly
2004 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
2005 this commit disables MII commads for now.
2007 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
2008 Author: Bartlomiej Sieka <tur@semihalf.com>
2009 Date: Tue Jan 23 13:25:22 2007 +0100
2011 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
2012 Identification Register (CIR).
2014 commit fdef388758506765d4d6a7155c8f1584c63ff581
2015 Author: roy zang <tie-fei.zang@freescale.com>
2016 Date: Mon Jan 22 13:19:21 2007 +0800
2018 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
2019 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
2020 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
2023 commit a4012396645533aef218354eeba754dff0deace8
2024 Author: Wolfgang Denk <wd@pollux.denx.de>
2025 Date: Fri Jan 19 23:08:39 2007 +0100
2029 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
2030 Author: Heiko Schocher <hs@pollux.denx.de>
2031 Date: Fri Jan 19 19:57:10 2007 +0100
2033 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
2035 Signed-off-by: Heiko Schocher <hs@denx.de>
2037 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
2038 Author: Heiko Schocher <hs@pollux.denx.de>
2039 Date: Fri Jan 19 18:05:26 2007 +0100
2041 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
2042 if you must swap the bytes between reading/writing.
2043 (Needed for the SC3 board)
2045 Signed-off-by: Heiko Schocher <hs@denx.de>
2047 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
2048 Author: Stefan Roese <sr@denx.de>
2049 Date: Thu Jan 18 16:05:47 2007 +0100
2051 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
2053 Signed-off-by: Stefan Roese <sr@denx.de>
2055 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
2056 Author: Stefan Roese <sr@denx.de>
2057 Date: Thu Jan 18 11:54:52 2007 +0100
2059 [PATCH] Update Prodrive P3Mx support
2061 Signed-off-by: Stefan Roese <sr@denx.de>
2063 commit 34167a36c29ee946b727465db5c014746a08e978
2064 Author: Stefan Roese <sr@denx.de>
2065 Date: Thu Jan 18 11:48:10 2007 +0100
2067 [PATCH] Add missing Taishan config file
2069 Signed-off-by: Stefan Roese <sr@denx.de>
2071 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
2072 Author: Heiko Schocher <hs@pollux.denx.de>
2073 Date: Thu Jan 18 11:28:51 2007 +0100
2075 [PATCH] Fix: Compilerwarnings for SC3 board.
2076 The EBC Configuration Register is now by CFG_EBC_CFG definable
2077 Added JFFS2 support for the SC3 board.
2079 Signed-off-by: Heiko Schocher <hs@denx.de>
2081 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
2082 Author: Stefan Roese <sr@denx.de>
2083 Date: Thu Jan 18 10:25:34 2007 +0100
2085 [PATCH] Add support for AMCC Taishan PPC440GX eval board
2087 Signed-off-by: Stefan Roese <sr@denx.de>
2089 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
2090 Author: Wolfgang Denk <wd@pollux.denx.de>
2091 Date: Tue Jan 16 18:30:50 2007 +0100
2093 Raname solidcard3 into sc3; add redundant env for sc3
2095 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
2096 Author: Wolfgang Denk <wd@pollux.denx.de>
2097 Date: Tue Jan 16 12:46:35 2007 +0100
2099 Update default environment for Solidcard3
2101 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
2102 Author: Stefan Roese <sr@denx.de>
2103 Date: Mon Jan 15 09:46:29 2007 +0100
2105 [PATCH] Fix 440SPe rev B detection from previous patch
2107 Signed-off-by: Stefan Roese <sr@denx.de>
2109 commit a443d31410c571ee8f970da819a44d698fdd6b1f
2110 Author: Heiko Schocher <hs@pollux.denx.de>
2111 Date: Sun Jan 14 13:35:31 2007 +0100
2113 [FIX] correct I2C Writes for the LM81 Sensor.
2115 Signed-off-by: Heiko Schocher <hs@denx.de>
2117 commit 0bba5452835f19a61204edcda3a58112fd8e2208
2118 Author: Wolfgang Denk <wd@pollux.denx.de>
2119 Date: Sat Jan 13 11:17:10 2007 +0100
2121 Undo commit 3033ebb2: reset command does not take any arguments
2123 Haiying Wang's modification to the reset command was broken, undo it.
2125 Signed-off-by: Wolfgang Denk <wd@denx.de>
2127 commit 95981778cff0038fd9941044d6a3eda810e33258
2128 Author: Stefan Roese <sr@denx.de>
2129 Date: Sat Jan 13 08:01:03 2007 +0100
2131 [PATCH] Update 440SP(e) cpu revisions
2133 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
2135 Signed-off-by: Stefan Roese <sr@denx.de>
2137 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
2138 Author: Stefan Roese <sr@denx.de>
2139 Date: Sat Jan 13 07:59:56 2007 +0100
2141 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
2143 Now the board revision and the current PCI bus speed are printed after
2146 Also the EBC initialising is now done via defines in the board config
2149 Signed-off-by: Stefan Roese <sr@denx.de>
2151 commit 36adff362c2c0141ff8a810d42a7e478f779130f
2152 Author: Stefan Roese <sr@denx.de>
2153 Date: Sat Jan 13 07:59:19 2007 +0100
2155 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
2157 Now the board revision and the current PCI bus speed are printed after
2160 Also the EBC initialising is now done via defines in the board config
2163 Signed-off-by: Stefan Roese <sr@denx.de>
2165 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
2166 Author: Stefan Roese <sr@denx.de>
2167 Date: Sat Jan 13 07:57:51 2007 +0100
2169 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
2171 Now the board revision and the current PCI bus speed are printed after
2174 Signed-off-by: Stefan Roese <sr@denx.de>
2176 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
2177 Author: Heiko Schocher <hs@pollux.denx.de>
2178 Date: Thu Jan 11 15:44:44 2007 +0100
2180 Added support for the SOLIDCARD III board from Eurodesign
2182 Signed-off-by: Heiko Schocher <hs@denx.de>
2184 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
2185 Author: Reinhard Thies <Reinhard.Thies@web.de>
2186 Date: Wed Jan 10 14:41:14 2007 +0100
2188 Adjusted default environment for cam5200 board.
2190 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
2191 Author: Wolfgang Denk <wd@pollux.denx.de>
2192 Date: Wed Jan 10 15:35:52 2007 +0100
2196 commit 787fa15860a57833e50bd30555079a9cd4e519b8
2197 Author: Wolfgang Denk <wd@pollux.denx.de>
2198 Date: Wed Jan 10 01:28:39 2007 +0100
2200 Fix auto_update for MCC200 board.
2202 The invocation of do_auto_update() is moved to the end of the
2203 misc_init_r() function, after the flash mappings have been
2204 initialized. Please find attached a patch that implements that
2207 Also correct the decoding of the keypad status. With this update, the
2208 key that will trigger the update is Column 2, Row 2.
2210 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
2211 Author: Marian Balakowicz <m8@semihalf.com>
2212 Date: Wed Jan 10 00:26:15 2007 +0100
2214 CAM5200 flash driver modifications:
2215 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
2216 - add second build target 'cam5200_niosflash' which still uses custom driver
2218 commit 67fea022fa957f59653b5238c7496f80a6b70432
2219 Author: Markus Klotzbuecher <mk@denx.de>
2220 Date: Tue Jan 9 16:02:48 2007 +0100
2222 SPC1920: cleanup memory contoller setup
2224 commit 8fc2102faa23593c80381437c09f7745a14deb40
2225 Author: Markus Klotzbuecher <mk@denx.de>
2226 Date: Tue Jan 9 14:57:14 2007 +0100
2228 Fix the cpu speed setup to work with all boards.
2230 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
2231 Author: Markus Klotzbuecher <mk@denx.de>
2232 Date: Tue Jan 9 14:57:13 2007 +0100
2234 SPC1920: add support for the FM18L08 Ramtron FRAM
2236 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
2237 Author: Markus Klotzbuecher <mk@denx.de>
2238 Date: Tue Jan 9 14:57:13 2007 +0100
2240 SPC1920: update the HPI register addresses to work with the second
2241 generation of hardware
2243 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
2244 Author: Markus Klotzbuecher <mk@creamnet.de>
2245 Date: Tue Jan 9 14:57:13 2007 +0100
2247 Miscellanious spc1920 related cleanups
2249 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
2250 Author: Markus Klotzbuecher <mk@denx.de>
2251 Date: Tue Jan 9 14:57:12 2007 +0100
2253 SPC1920 GO/NOGO led should be set to color red in U-Boot
2255 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
2256 Author: Markus Klotzbuecher <mk@creamnet.de>
2257 Date: Tue Jan 9 14:57:12 2007 +0100
2259 Add support for the DS3231 RTC
2261 commit 8139567b60d678584b05f0718a681f2047c5e14f
2262 Author: Markus Klotzbuecher <mk@creamnet.de>
2263 Date: Tue Jan 9 14:57:11 2007 +0100
2265 SMC1 uses external CLK4 instead of BRG on spc1920
2267 commit d8d9de1a02fbd880b613d607143d1f57342affc7
2268 Author: Markus Klotzbuecher <mk@creamnet.de>
2269 Date: Tue Jan 9 14:57:10 2007 +0100
2271 Update the SPC1920 CMB PLD driver
2273 commit 3f34f869162750e5e999fd140f884f5de952bcfe
2274 Author: Markus Klotzbuecher <mk@creamnet.de>
2275 Date: Tue Jan 9 14:57:10 2007 +0100
2277 Add / enable I2C support on the spc1920 board
2279 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
2280 Author: Markus Klotzbuecher <mk@creamnet.de>
2281 Date: Tue Jan 9 14:57:10 2007 +0100
2283 Add support for the tms320671x host port interface (HPI)
2285 commit f4eb54529bb3664c3a562e488b460fe075f79d67
2286 Author: Wolfgang Denk <wd@pollux.denx.de>
2287 Date: Sun Jan 7 00:13:11 2007 +0100
2289 Prepare for release 1.2.0
2291 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
2292 Author: Stefan Roese <sr@denx.de>
2293 Date: Sat Jan 6 15:58:09 2007 +0100
2295 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
2297 This patch fixes a problem with an incorrect setup for the refresh
2298 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
2300 Signed-off-by: Stefan Roese <sr@denx.de>
2302 commit f16c1da9577f06c5fc08651a4065537407de4635
2303 Author: Stefan Roese <sr@denx.de>
2304 Date: Sat Jan 6 15:56:13 2007 +0100
2306 [PATCH] Update ALPR board files
2308 This update brings the ALPR board support to the newest version.
2309 It also fixes a problem with the NAND driver.
2311 Signed-off-by: Stefan Roese <sr@denx.de>
2313 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
2314 Author: Stefan Roese <sr@denx.de>
2315 Date: Fri Jan 5 11:46:05 2007 +0100
2317 [PATCH] nand: Fix problem with oobsize calculation
2319 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
2321 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
2322 returns a 0x15. In the code fragment below bits [1:0] determine the
2323 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
2324 next field is also ANDed with 0x3. However this is a one bit field
2325 as defined in the Hynix and Samsung parts in the 4th ID byte that
2326 determins the oobsize, not a two bit field. It works on Samsung as
2327 bits[3:2] are 01. However for the Hynix there is a 11 in these two
2328 bits, so the oob size gets messed up.
2330 I checked the correct linux code and the suggested fix from Brian is
2331 also available in the linux nand mtd driver.
2333 Signed-off-by: Stefan Roese <sr@denx.de>
2335 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
2336 Author: Stefan Roese <sr@denx.de>
2337 Date: Fri Jan 5 10:40:36 2007 +0100
2339 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
2341 This fix will make the MAL burst disabling patch for the Linux
2342 EMAC driver obsolete.
2344 Signed-off-by: Stefan Roese <sr@denx.de>
2346 commit 023889838282b6237b401664f22dd22dfba2c066
2347 Author: Stefan Roese <sr@denx.de>
2348 Date: Fri Jan 5 10:38:05 2007 +0100
2350 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
2352 This code will optimize the DDR2 controller setup on a board specific
2355 Note: This code doesn't work right now on the NAND booting image for the
2356 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
2358 Signed-off-by: Stefan Roese <sr@denx.de>
2360 commit cce4acbb68398634b8d011ed7bb0d12269c84230
2361 Author: Bartlomiej Sieka <tur@semihalf.com>
2362 Date: Thu Dec 28 19:08:21 2006 +0100
2365 - fix a typo in V38B config file
2366 - move watchdog initialisation earlier in the boot process
2367 - add "wdt=off" to default kernel command line (disables kernel watchdog)
2369 commit 92eb729bad876725aeea908d2addba0800620840
2370 Author: Wolfgang Denk <wd@pollux.denx.de>
2371 Date: Wed Dec 27 01:26:13 2006 +0100
2373 Fix bug in adaption of Stefano Babic's CFI driver patch.
2375 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
2376 Author: Wolfgang Denk <wd@pollux.denx.de>
2377 Date: Sun Dec 24 01:42:57 2006 +0100
2381 commit d784fdb05900ada3686d5778783e1fb328e9fb66
2382 Author: Stefano Babic <sbabic@denx.de>
2383 Date: Tue Dec 12 00:22:42 2006 +0100
2385 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
2387 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
2388 Author: Stefan Roese <sr@denx.de>
2389 Date: Fri Dec 22 14:29:40 2006 +0100
2391 [PATCH] Fix sequoia flash autodetection (finally correct)
2393 Now 32MByte and 64MByte FLASH is know to work and other
2394 configurations should work too.
2396 Signed-off-by: Stefan Roese <sr@denx.de>
2398 commit 82e5236a8b719543643fd26d5827938ab2b94818
2399 Author: Wolfgang Denk <wd@pollux.denx.de>
2400 Date: Fri Dec 22 10:30:26 2006 +0100
2402 Minor code cleanup; update CHANGELOG.
2404 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
2405 Author: Heiko Schocher <hs@pollux.denx.de>
2406 Date: Thu Dec 21 17:17:02 2006 +0100
2408 Added support for the TQM8272 board from TQ
2410 Signed-off-by: Heiko Schocher <hs@denx.de>
2412 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
2413 Author: Heiko Schocher <hs@pollux.denx.de>
2414 Date: Thu Dec 21 16:14:48 2006 +0100
2416 [PATCH] Add support for the UC101 board from MAN.
2418 Signed-off-by: Heiko Schocher <hs@denx.de>
2420 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
2421 Author: Bartlomiej Sieka <tur@semihalf.com>
2422 Date: Wed Dec 20 00:29:43 2006 +0100
2424 Fix to make the baudrate changes immediate for the MCF52x2 family.
2426 commit daa6e418bcc0c717752e8de939c213c790286096
2427 Author: Bartlomiej Sieka <tur@semihalf.com>
2428 Date: Wed Dec 20 00:27:32 2006 +0100
2430 Preliminary support for the iDMR board (ColdFire).
2432 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
2433 Author: Andrei Safronov <safronov@pollux.denx.de>
2434 Date: Fri Dec 8 16:23:08 2006 +0100
2436 automatic update mechanism
2438 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
2439 Author: roy zang <tie-fei.zang@freescale.com>
2440 Date: Mon Dec 4 17:56:59 2006 +0800
2442 Slight code clean up.
2443 Add comments, delete duplicate define and remove spaces.
2444 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2446 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
2447 Author: roy zang <tie-fei.zang@freescale.com>
2448 Date: Mon Dec 4 17:54:21 2006 +0800
2450 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
2451 multiplier table can not refect the real PLL clock behavior of these
2452 processors. Please refer to the hardware specification for detailed
2453 information of the corresponding processors.
2454 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2456 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
2457 Author: roy zang <tie-fei.zang@freescale.com>
2458 Date: Mon Dec 4 14:46:23 2006 +0800
2460 Remove the static MAC address, ip address, server ip, netmask and
2461 gateway ip for network setting.
2462 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2464 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
2465 Author: roy zang <tie-fei.zang@freescale.com>
2466 Date: Mon Dec 4 14:33:08 2006 +0800
2468 Remove the duplicate memory test code for mpc744ihpc2 board.
2469 If a memory test is needed, please use the functions in
2470 post/memory.c or memtest command.
2471 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2473 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
2474 Author: roy zang <tie-fei.zang@freescale.com>
2475 Date: Fri Dec 1 19:01:25 2006 +0800
2477 Fix the exception occuring in RAM table search issue.
2478 The original search_one_table() function code can only processes the search
2479 for the exception occurring in FLASH/ROM, because the exception and fixup
2480 table usually locate in FLASH. If the exception address is also in
2481 FLASH, it will be OK.
2482 If the exception occurs in RAM, after the u-boot relocation, a
2483 relocation offset should be added.
2485 clean up the code in cpu/74xx_7xx/cpu.c
2487 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2489 commit ee311214e0d216f904feea269599d0934bf71f23
2490 Author: roy zang <tie-fei.zang@freescale.com>
2491 Date: Fri Dec 1 11:47:36 2006 +0800
2493 Clean up the code according to codestyle:
2494 (1) remove some C++ comments.
2495 (2) remove trailing white space.
2496 (3) remove trailing empty line.
2497 (4) Indentation by table.
2498 (5) remove {} in one line condition.
2499 (6) add space before '(' in function call.
2500 Remove some weird printf () output.
2501 Add necessary comments.
2502 Modified Makefile to support building in a separate directory.
2504 commit dd520bf314c7add4183c5191692180f576f96b60
2505 Author: Wolfgang Denk <wd@pollux.denx.de>
2506 Date: Thu Nov 30 18:02:20 2006 +0100
2510 commit 8d9a8610b8256331132227e9e6585c6bd5742787
2511 Author: Wolfgang Denk <wd@pollux.denx.de>
2512 Date: Thu Nov 30 01:54:07 2006 +0100
2514 Code cleanup. Update CHANGELOG.
2516 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
2517 Author: Grant Likely <grant.likely@secretlab.ca>
2518 Date: Wed Nov 29 16:23:42 2006 +0100
2520 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
2522 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
2523 not the XLB frequency.
2525 This patch depends on the previous patches for MPC52xx device tree support
2527 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2528 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2530 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
2531 Author: Stefan Roese <sr@denx.de>
2532 Date: Wed Nov 29 15:42:37 2006 +0100
2534 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
2536 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
2537 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
2538 quite similar and share the same board directory "prodrive/p3mx"
2539 and the same config file "p3mx.h".
2541 Signed-off-by: Stefan Roese <sr@denx.de>
2543 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
2544 Author: Stefan Roese <sr@denx.de>
2545 Date: Wed Nov 29 12:53:15 2006 +0100
2547 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
2549 In the bootvx command the load address was only read from the env
2550 variable "loadaddr" and not optionally passed as paramter as described
2551 in the help. This is fixed with this patch. The behaviour is now the
2552 same as in the bootelf command.
2554 Signed-off-by: Stefan Roese <sr@denx.de>
2556 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
2557 Author: Stefan Roese <sr@denx.de>
2558 Date: Wed Nov 29 12:03:57 2006 +0100
2560 [PATCH] include/ppc440.h minor error affecting interrupts
2562 Fixed include/ppc440.c for UIC address Bug
2564 Corrects bug affecting the addresses for the universal interrupt
2565 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
2567 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
2568 Signed-off-by: Stefan Roese <sr@denx.de>
2570 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
2571 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2572 Date: Tue Nov 28 16:17:27 2006 -0600
2574 Make fsl-i2c not conflict with SOFT I2C
2576 Signed-off-by: Timur Tabi <timur@freescale.com>
2578 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
2579 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2580 Date: Tue Nov 28 16:17:18 2006 -0600
2582 Fix I2C master address initialization.
2584 Signed-off-by: Timur Tabi <timur@freescale.com>
2586 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
2587 Author: Kim Phillips <kim.phillips@freescale.com>
2588 Date: Tue Nov 28 23:31:19 2006 -0600
2590 Assign maintainers for mpc8349emds and mpc8360emds
2592 Dave for mpc8360emds, and me for mpc8349emds.
2594 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
2595 Author: Kim Phillips <kim.phillips@freescale.com>
2596 Date: Tue Nov 28 23:28:33 2006 -0600
2598 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
2600 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
2601 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
2603 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
2604 Author: Timur Tabi <timur@freescale.com>
2605 Date: Tue Nov 28 12:09:35 2006 -0600
2607 mpc83xx: Miscellaneous code style fixes
2609 Implement various code style fixes and similar changes.
2611 Signed-off-by: Timur Tabi <timur@freescale.com>
2613 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
2614 Author: Stefan Roese <sr@denx.de>
2615 Date: Tue Nov 28 17:55:49 2006 +0100
2617 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
2619 This patch adds the code and configuration necessary to boot with an
2620 arch/powerpc Linux kernel.
2622 Signed-off-by: Grant Likely <grant.likely@gmail.com>
2623 Acked-by: Jon Loeliger <jdl@freescale.com>
2625 commit e732faec95a83cb468b4850ae807c8301dde8f6a
2626 Author: Stefan Roese <sr@denx.de>
2627 Date: Tue Nov 28 16:09:24 2006 +0100
2629 [PATCH] PPC4xx: 440SP Rev. C detection added
2631 Signed-off-by: Stefan Roese <sr@denx.de>
2633 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
2634 Author: Stefan Roese <sr@denx.de>
2635 Date: Tue Nov 28 11:04:45 2006 +0100
2637 [PATCH] nand: Fix patch merge problem
2639 Signed-off-by: Stefan Roese <sr@denx.de>
2641 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
2642 Author: Stefan Roese <sr@denx.de>
2643 Date: Tue Nov 28 11:04:45 2006 +0100
2645 [PATCH] nand: Fix patch merge problem
2647 Signed-off-by: Stefan Roese <sr@denx.de>
2649 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
2650 Author: Wolfgang Denk <wd@pollux.denx.de>
2651 Date: Mon Nov 27 22:53:53 2006 +0100
2655 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
2656 Author: Stefan Roese <sr@denx.de>
2657 Date: Mon Nov 27 17:43:25 2006 +0100
2659 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
2661 Patch below corrects the setting of the zmiifer register, it was
2662 overwritting the register rather than ORing the settings.
2664 Signed-off-by: Neil Wilson <NWilson@airspan.com>
2665 Signed-off-by: Stefan Roese <sr@denx.de>
2667 commit d1a72545296800b7e219f93104ad5836f0003d66
2668 Author: Stefan Roese <sr@denx.de>
2669 Date: Mon Nov 27 17:34:10 2006 +0100
2671 [PATCH] Select NAND embedded environment from board configuration
2673 The current NAND Bootloader setup forces the environment
2674 variables to be in line with the bootloader. This change
2675 enables the configuration to be made in the board include
2676 file instead so that it can be individually enabled.
2678 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2679 Signed-off-by: Stefan Roese <sr@denx.de>
2681 commit 15784862857c3c2214498defcfed84ff137fb81e
2682 Author: Stefan Roese <sr@denx.de>
2683 Date: Mon Nov 27 17:22:19 2006 +0100
2685 [PATCH] nand_wait() timeout fixes
2687 Two fixes for the nand_wait() function in
2688 drivers/nand/nand_base.c:
2690 1. Use correct timeouts. The original timeouts in Linux
2691 source are 400ms and 20ms not 40s and 20s
2693 2. Return correct error value in case of timeout. 0 is
2696 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
2697 Signed-off-by: Stefan Roese <sr@denx.de>
2699 commit da5553b095bf04f4f109ad7e565dae3aba47b230
2700 Author: Stefan Roese <sr@denx.de>
2701 Date: Mon Nov 27 17:04:06 2006 +0100
2703 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
2705 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
2706 arguments to bootm. It removes the getenv("disable_of") test that used
2707 to be used for this purpose.
2709 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2710 Acked-by: Jon Loeliger <jdl@freescale.com>
2712 commit a9398e018593782c5fa7d0741955fc1256b34c1e
2713 Author: Wolfgang Denk <wd@pollux.denx.de>
2714 Date: Mon Nov 27 15:32:42 2006 +0100
2716 Minor code cleanup. Update CHANGELOG.
2718 commit 1729b92cde575476684bffe819d0b7791b57bff2
2719 Author: Stefan Roese <sr@denx.de>
2720 Date: Mon Nov 27 14:52:04 2006 +0100
2722 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
2724 Signed-off-by: Stefan Roese <sr@denx.de>
2726 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
2727 Author: Stefan Roese <sr@denx.de>
2728 Date: Mon Nov 27 14:49:51 2006 +0100
2730 [PATCH] alpr: remove unused board specific flash driver
2732 Signed-off-by: Stefan Roese <sr@denx.de>
2734 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
2735 Author: Stefan Roese <sr@denx.de>
2736 Date: Mon Nov 27 14:48:41 2006 +0100
2738 [PATCH] 4xx: Fix problem with board specific reset code
2740 Signed-off-by: Stefan Roese <sr@denx.de>
2742 commit ec0c2ec725aec9524a177a77ce75559e644a931a
2743 Author: Stefan Roese <sr@denx.de>
2744 Date: Mon Nov 27 14:46:06 2006 +0100
2746 [PATCH] Remove testing 4xx enet PHY setup
2748 Signed-off-by: Stefan Roese <sr@denx.de>
2750 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
2751 Author: Stefan Roese <sr@denx.de>
2752 Date: Mon Nov 27 14:12:17 2006 +0100
2754 [PATCH] Update Prodrive ALPR board support (440GX)
2756 Signed-off-by: Stefan Roese <sr@denx.de>
2758 commit 78d620ebb5871d252270dedfad60c6568993b780
2759 Author: Wolfgang Denk <wd@atlas.denx.de>
2760 Date: Thu Nov 23 22:58:58 2006 +0100
2762 Updates for TQM5200 modules:
2763 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
2764 - simplify "udate" definitions
2766 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
2767 Author: Stefan Roese <sr@denx.de>
2768 Date: Wed Nov 22 13:20:50 2006 +0100
2770 [PATCH] PPC4xx start.S: Fix for processor errata
2772 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
2773 errata 1.12: 440_33 by moving patch up in code.
2775 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
2776 Signed-off-by: Stefan Roese <sr@denx.de>
2778 commit 4ef6251403f637841000e0fef9e832aa01339822
2779 Author: Stefan Roese <sr@denx.de>
2780 Date: Mon Nov 20 20:39:52 2006 +0100
2782 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
2784 Signed-off-by: Stefan Roese <sr@denx.de>
2786 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
2787 Author: Wolfgang Denk <wd@pollux.denx.de>
2788 Date: Mon Nov 20 10:28:30 2006 +0100
2792 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
2793 Author: Stefan Roese <sr@denx.de>
2794 Date: Mon Nov 13 13:55:24 2006 +0100
2796 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
2798 * Adds support for AMD command set Top Boot flash geometry reversal
2799 * Adds support for reading JEDEC Manufacturer ID and Device ID
2800 * Adds support for displaying command set, manufacturer id and
2802 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
2803 * Removes outdated change history (refer to git log instead)
2805 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
2806 Signed-off-by: Stefan Roese <sr@denx.de>
2808 commit b21b511d4c50408f4853f46f06b601272196223f
2809 Author: Wolfgang Denk <wd@pollux.denx.de>
2810 Date: Sun Nov 12 21:13:23 2006 +0100
2814 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
2815 Author: Bartlomiej Sieka <tur@semihalf.com>
2816 Date: Sat Nov 11 22:48:22 2006 +0100
2818 Disable the watchdog in the default config for the V38B board.
2820 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
2821 Author: Bartlomiej Sieka <tur@semihalf.com>
2822 Date: Sat Nov 11 22:43:00 2006 +0100
2824 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
2825 group is enabled for USB earlier (in cpu_init_f() instead of
2826 usb_lowlevel_init()).
2828 commit 91650b3e4de688038d4f71279c44858e3e2c6870
2829 Author: Wolfgang Denk <wd@pollux.denx.de>
2830 Date: Mon Nov 6 17:06:36 2006 +0100
2832 Sequential accesses to non-existent memory must be synchronized,
2833 at least on G2 cores.
2835 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
2837 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
2838 Author: Timur Tabi <timur@freescale.com>
2839 Date: Fri Nov 3 19:15:00 2006 -0600
2841 mpc83xx: Update 83xx to use fsl_i2c.c
2843 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
2844 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
2845 Added multiple I2C bus support to fsl_i2c.c.
2847 Signed-off-by: Timur Tabi <timur@freescale.com>
2849 commit d239d74b1c937984bc519083a8e7de373a390f06
2850 Author: Timur Tabi <timur@freescale.com>
2851 Date: Fri Nov 3 12:00:28 2006 -0600
2853 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
2855 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
2856 tree matches the other 8xxx trees.
2858 Signed-off-by: Timur Tabi <timur@freescale.com>
2860 commit f7fb2e703ec9688541416962724adff70a7322cb
2861 Author: Kim Phillips <kim.phillips@freescale.com>
2862 Date: Thu Nov 2 19:47:11 2006 -0600
2864 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
2866 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
2867 Author: Dave Liu <daveliu@freescale.com>
2868 Date: Thu Nov 2 18:05:50 2006 -0600
2870 mpc83xx: Fix the incorrect dcbz operation
2872 The 834x rev1.x silicon has one CPU5 errata.
2874 The issue is when the data cache locked with
2875 HID0[DLOCK], the dcbz instruction looks like no-op inst.
2877 The right behavior of the data cache is when the data cache
2878 Locked with HID0[DLOCK], the dcbz instruction allocates
2881 The 834x rev3.0 and later and 8360 have not this bug inside.
2883 So, when 834x rev3.0/8360 are working with ECC, the dcbz
2884 instruction will corrupt the stack in cache, the processor will
2887 However, the 834x rev1.x can work with ECC with these code,
2888 because the sillicon has this cache bug. The dcbz will not
2889 corrupt the stack in cache.
2890 Really, it is the fault code running on fault sillicon.
2892 This patch fix the incorrect dcbz operation. Instead of
2893 CPU FP writing to initialise the ECC.
2896 * Fix the incorrect dcbz operation instead of CPU FP
2897 writing to initialise the ECC memory. Otherwise, it
2898 will corrupt the stack in cache, The processor will checkstop
2901 Signed-off-by: Dave Liu <daveliu@freescale.com>
2903 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
2904 Author: Kim Phillips <kim.phillips@freescale.com>
2905 Date: Wed Nov 1 00:10:40 2006 -0600
2907 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
2909 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
2910 STDOUT_PATH configuration bits to mpc8349emds,
2911 mpc8349itx, and mpc8360emds board code.
2913 redo environment to use bootm with the fdtaddr
2914 for booting ARCH=powerpc kernels by default,
2915 and provide default fdtaddr values.
2917 commit 48041365b3420589ad464ebc7752e0053538b729
2918 Author: Kim Phillips <kim.phillips@freescale.com>
2919 Date: Wed Nov 1 00:07:25 2006 -0600
2921 mpc83xx: change ft code to modify local-mac-address property
2923 Update 83xx OF code to update local-mac-address properties
2924 for ethernet instead of the obsolete 'address' property.
2926 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
2927 Author: Timur Tabi <timur@freescale.com>
2928 Date: Tue Oct 31 21:23:16 2006 -0600
2930 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
2932 This patch also adds an improved I2C set_speed(), which handles all clock
2935 Signed-off-by: Timur Tabi <timur@freescale.com>
2937 commit ac4b5622ce050b5ee1e154b98df630d778661632
2938 Author: Dave Liu <daveliu@freescale.com>
2939 Date: Tue Oct 31 19:54:59 2006 -0600
2941 mpc83xx: add the README.mpc8360emds
2943 add doc/README.mpc8360emds to accompany the new board support
2945 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
2946 Author: Dave Liu <daveliu@freescale.com>
2947 Date: Fri Nov 3 12:11:15 2006 -0600
2949 mpc83xx: add QE ethernet support
2951 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
2953 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
2954 Author: Dave Liu <daveliu@freescale.com>
2955 Date: Fri Nov 3 19:33:44 2006 -0600
2957 mpc83xx: Add MPC8360EMDS basic board support
2959 Add support for the Freescale MPC8360EMDS board.
2960 Includes DDR, DUART, Local Bus, PCI.
2962 commit 23892e49352de74f7fac36ff90bb1be143d195e3
2963 Author: Dave Liu <daveliu@freescale.com>
2964 Date: Tue Oct 31 19:30:40 2006 -0600
2966 mpc83xx: add the QUICC Engine (QE) immap file
2968 common QE immap file. Also required for 8360.
2970 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
2971 Author: Dave Liu <daveliu@freescale.com>
2972 Date: Tue Oct 31 19:25:38 2006 -0600
2974 mpc83xx: Add 8360 specifics to 83xx immap
2976 Mainly add QE device dependencies, with appropriate 8360 protection.
2979 commit 988833324a7fda482c8ac3ca23eb539f8232e404
2980 Author: Timur Tabi <timur@freescale.com>
2981 Date: Tue Oct 31 19:14:41 2006 -0600
2983 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
2985 PREREQUISITE PATCHES:
2987 * This patch can only be applied after the following patches have been applied:
2989 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
2990 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
2994 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
2995 the clock for the 2nd USB board (Linux kernel will hang otherwise),
2996 and fix the CONFIG_BOOTARGS macro.
2998 Signed-off-by: Timur Tabi <timur@freescale.com>
3000 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
3001 Author: Timur Tabi <timur@freescale.com>
3002 Date: Tue Oct 31 18:44:42 2006 -0600
3004 mpc83xx: Add support for the MPC8349E-mITX
3006 PREREQUISITE PATCHES:
3008 * This patch can only be applied after the following patches have been applied:
3010 1) DNX#2006090742000024 "Add support for multiple I2C buses"
3011 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
3012 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
3013 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
3014 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
3018 * Add support for the Freescale MPC8349E-mITX reference design platform.
3019 The second TSEC (Vitesse 7385 switch) is not supported at this time.
3021 Signed-off-by: Timur Tabi <timur@freescale.com>
3023 commit 183da6d9b446cc12123455844ad1187e2375626f
3024 Author: Ben Warren <bwarren@qstreams.com>
3025 Date: Tue Sep 12 10:15:53 2006 -0400
3027 Additional MPC8349 support for multibus i2c
3031 Here is a patch for a file that was accidentally left out of a previous
3034 It accompanies the patch with ticket DNX#2006090742000024
3037 Change PCI initialization to use new multi-bus I2C API.
3042 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
3043 Author: Ben Warren <bwarren@qstreams.com>
3044 Date: Thu Sep 7 16:51:04 2006 -0400
3046 Multi-bus I2C implementation of MPC834x
3050 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
3051 family and the MPC8349EMDS board in particular.
3052 This patch requires Patch 1 (Add support for multiple I2C buses).
3053 Testing was performed on a 533MHz board.
3055 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
3057 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3060 Implemented driver-level code to support two I2C buses on the
3061 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
3062 are 50kHz, 100kHz and 400kHz on each bus.
3067 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
3068 Author: Ben Warren <bwarren@qstreams.com>
3069 Date: Thu Sep 7 16:50:54 2006 -0400
3071 Add support for multiple I2C buses
3075 Attached is a patch providing support for multiple I2C buses at the
3076 command level. The second part of the patch includes an implementation
3077 for the MPC834x CPU and MPC8349EMDS board.
3079 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
3081 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3085 1. Include new 'i2c' command (based on USB implementation) using
3086 CONFIG_I2C_CMD_TREE.
3088 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
3089 the commands to change bus number and speed are only available under the
3090 new 'i2c' command mentioned in the first bullet.
3092 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
3093 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
3094 of an array of bus-device pairs. Otherwise, it is an array of uchar.
3097 Added new 'i2c' master command for all I2C interaction. This is
3098 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
3099 setting I2C bus speed as well as changing the active bus if the board
3100 has more than one (conditionally compiled with
3101 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
3107 commit bed85caf872714ebf53013967a695c9d63acfc68
3108 Author: Timur Tabi <timur@freescale.com>
3109 Date: Tue Oct 31 18:13:36 2006 -0600
3111 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
3115 * Errata DDR6, which affects all current MPC 834x processors, lists changes
3116 required to maintain compatibility with various types of DDR memory. This
3117 patch implements those changes.
3119 Signed-off-by: Timur Tabi <timur@freescale.com>
3121 commit afd6e470f639883002c7c59d562690a5cb0f4865
3122 Author: Timur Tabi <timur@freescale.com>
3123 Date: Wed Oct 25 18:45:23 2006 -0500
3125 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
3127 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
3128 Author: Timur Tabi <timur@freescale.com>
3129 Date: Tue Aug 22 17:07:00 2006 -0500
3131 mpc83xx: Add support for variable flash memory sizes on 83xx systems
3135 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
3136 window registers, instead of using a hard-coded value of 8MB.
3138 Signed-off-by: Timur Tabi <timur@freescale.com>
3140 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
3141 Author: Tanya Jiang <tanya.jiang@freescale.com>
3142 Date: Thu Aug 3 18:38:13 2006 +0800
3144 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
3146 Unified TQM834x variable names with 83xx and consolidated macro
3147 in preparation for the 8360 and other upcoming 83xx devices.
3149 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
3151 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
3152 Author: Dave Liu <daveliu@freescale.com>
3153 Date: Wed Oct 25 14:41:21 2006 -0500
3155 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
3157 Incorporated the common unified variable names and the changes in preparation
3158 for releasing mpc8360 patches.
3160 Signed-off-by: Dave Liu <daveliu@freescale.com>
3162 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
3163 Author: Tanya Jiang <tanya.jiang@freescale.com>
3164 Date: Thu Aug 3 18:36:02 2006 +0800
3166 mpc83xx: Fix missing build for mpc8349emds pci.c
3168 Make pci build for mpc8349emds
3170 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
3172 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
3173 Author: Tanya Jiang <tanya.jiang@freescale.com>
3174 Date: Thu Aug 3 18:39:49 2006 +0800
3176 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
3178 Removed unused file resetvec.S for mpc83xx cpu
3180 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
3182 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
3183 Author: Nick Spence <Nick.Spence@freescale.com>
3184 Date: Sat Sep 30 00:32:59 2006 -0700
3186 NAND Flash verify across block boundaries
3188 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
3190 and the write crosses a block boundary. The pointer to the verification
3191 buffer (bufstart) is not being updated to reflect the starting of the
3193 block so the verification of the second block fails.
3197 * Fix NAND FLASH page verification across block boundaries
3199 commit f484dc791a3932537213c43c654cc1295c64b84c
3200 Author: Nick Spence <nick.spence@freescale.com>
3201 Date: Thu Sep 7 07:39:46 2006 -0700
3203 Added RGMII support to the TSECs and Marvell 881111 Phy
3205 Added a phy initialization to adjust the RGMII RX and TX timing
3206 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
3208 Signed-off-by: Nick Spence <nick.spence@freescale.com>
3210 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
3211 Author: roy zang <tie-fei.zang@freescale.com>
3212 Date: Fri Nov 3 13:10:00 2006 +0800
3214 Remove some unused CFG define.
3217 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
3218 Author: roy zang <tie-fei.zang@freescale.com>
3219 Date: Fri Nov 3 13:07:36 2006 +0800
3221 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
3222 Both work. 0xFF000000 seems more reasonable.
3224 commit c59200443072353044aa4bf737a5a60f9a9af231
3225 Author: Wolfgang Denk <wd@pollux.denx.de>
3226 Date: Thu Nov 2 15:15:01 2006 +0100
3228 Release U-Boot 1.1.6
3230 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
3231 Author: roy zang <tie-fei.zang@freescale.com>
3232 Date: Thu Nov 2 19:14:48 2006 +0800
3234 This patch comes from Yuli's posted patch on 8/8/2006
3235 titled "CFI Driver Little-Endian write Issue".
3237 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
3239 If that patch applied, please discard this one.
3240 Until now , I do not see his patch is applied. So please apply this one.
3242 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
3243 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3245 commit b825f158e449e1e9cf74c08e572955e122394c96
3246 Author: roy zang <tie-fei.zang@freescale.com>
3247 Date: Thu Nov 2 19:12:31 2006 +0800
3249 Tsi108 on chip i2c support.
3251 The i2c Interface provides a master-only, serial interface that can be
3252 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
3255 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3256 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3258 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
3259 Author: roy zang <tie-fei.zang@freescale.com>
3260 Date: Thu Nov 2 19:11:06 2006 +0800
3262 Tsi108 on chip pci controller support.
3264 If there is no pci card, the tsi108/109 pci configure read will
3265 cause a machine check exception to the processor. PCI error should
3266 also be cleared after the read.
3268 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3269 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3271 commit d1927cee977126e547ceeba23e4f978f377cfb8f
3272 Author: roy zang <tie-fei.zang@freescale.com>
3273 Date: Thu Nov 2 19:08:55 2006 +0800
3275 Tundra tsi108 on chip Ethernet controller support.
3277 The following is a brief description of the Ethernet controller:
3278 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
3279 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
3280 to manage the two physical connection devices (PHYs). Each Ethernet port
3281 has its own statistics monitor that tracks and reports key interface
3282 statistics. Each port supports a 256-entry hash table for address
3283 filtering. In addition, each port is bridged to the Switch Fabric
3284 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
3286 Each Ethernet port also has a pair of internal Ethernet DMA channels to
3287 support the transmit and receive data flows. The Ethernet DMA channels
3288 use descriptors set up in memory, the memory map of the device, and
3289 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
3290 handles arbitration for the Switch Fabric. The Controller also
3291 has a register businterface for register accesses and status monitor
3294 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
3295 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
3296 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
3297 data flows to and from the Ethernet Controller through the Switch Fabric.
3299 Each Ethernet port uses its transmit and receive DMA channels to manage
3300 data flows through buffer descriptors that are predefined by the
3301 system (the descriptors can exist anywhere in the system memory map).
3302 These descriptors are data structures that point to buffers filled
3303 with data ready to transmit over Ethernet, or they point to empty
3304 buffers ready to receive data from Ethernet.
3306 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3307 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3309 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
3310 Author: roy zang <tie-fei.zang@freescale.com>
3311 Date: Thu Nov 2 19:01:33 2006 +0800
3313 Tundra tsi108 header file.
3315 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
3316 PowerPC processors that offers numerous system interconnect options for
3317 embedded application designers. The Tsi108 can interconnect 60x or
3318 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
3319 and Flash. Provided the macro define for tsi108 chip.
3321 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3322 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3324 commit 87c4db09699c6b89176b31004afcb83eb1585d47
3325 Author: roy zang <tie-fei.zang@freescale.com>
3326 Date: Thu Nov 2 18:59:15 2006 +0800
3328 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
3329 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
3331 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3332 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3334 commit 27801b8ab11c61b577e45742a515bb3b23b80241
3335 Author: roy zang <tie-fei.zang@freescale.com>
3336 Date: Thu Nov 2 18:57:21 2006 +0800
3338 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
3339 Make ,config.mk and link file for the mpc7448hpc2 board.
3341 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3342 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3344 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
3345 Author: roy zang <tie-fei.zang@freescale.com>
3346 Date: Thu Nov 2 18:55:04 2006 +0800
3348 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
3349 The mpc7448hpc2 board support header file.
3351 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3352 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3354 commit 625bb5ddb50b243f931262ca8c46956409471917
3355 Author: roy zang <tie-fei.zang@freescale.com>
3356 Date: Thu Nov 2 18:52:21 2006 +0800
3358 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
3359 The mpc7448hpc2 board support low level assemble language init code.
3361 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3362 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3364 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
3365 Author: roy zang <tie-fei.zang@freescale.com>
3366 Date: Thu Nov 2 18:49:51 2006 +0800
3368 General code modification for mpc7448hpc2 board support.
3369 1. Add 7447A and 7448 processor support.
3370 2. Add the following flags.
3372 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
3373 (such as by switch on board), this flag should be set.
3375 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
3376 relocates to RAM, this flag should be set.
3378 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
3379 system hang in exception, this flag should be set.
3381 There is a design issue for tsi108/109 pci configure read. When pci scan
3382 the slots, if there is no pci card, the tsi108/9 will cause a machine
3383 check exception for mpc7448 processor.
3385 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
3386 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3388 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
3389 Author: roy zang <tie-fei.zang@freescale.com>
3390 Date: Thu Nov 2 18:34:47 2006 +0800
3392 Add README file for mpc7448hpc2 board.
3393 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3395 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
3396 Author: Bartlomiej Sieka <tur@semihalf.com>
3397 Date: Wed Nov 1 02:04:38 2006 +0100
3399 Finish up support for MarelV38B board
3400 - add watchdog support
3401 - enable GPIO_WKUP_7 pin for input
3404 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
3405 Author: Bartlomiej Sieka <tur@semihalf.com>
3406 Date: Wed Nov 1 01:45:46 2006 +0100
3408 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
3409 * remove warnings when compiling ethaddr.c
3410 * adjust linker script (fixes a crash resulting from incorrect
3411 definition of __u_boot_cmd_start)
3412 - Some MarelV38B code cleanup.
3414 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
3415 Author: Bartlomiej Sieka <tur@semihalf.com>
3416 Date: Wed Nov 1 01:38:16 2006 +0100
3418 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
3419 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
3420 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
3421 MPC5XXX_WU_GPIO_DATA_O for affected boards.
3423 - Add defintions for some MPC5XXX GPIO pins.
3425 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
3426 Author: Bartlomiej Sieka <tur@semihalf.com>
3427 Date: Wed Nov 1 01:34:29 2006 +0100
3429 Changed MarelV38B board make target to lowercase. Config file cleanup.
3431 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
3432 Author: Wolfgang Denk <wd@pollux.denx.de>
3433 Date: Sun Oct 29 01:03:51 2006 +0200
3435 Automatically adjust ARFLAGS so "make -s" is really silent.
3437 commit fae684e89844856383bdf101440889557df3e6b1
3438 Author: Stefan Roese <sr@denx.de>
3439 Date: Sat Oct 28 16:45:00 2006 +0200
3441 [PATCH] omap925.c: Remove unused functions
3443 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3444 Signed-off-by: Stefan Roese <sr@denx.de>
3446 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
3447 Author: Stefan Roese <sr@denx.de>
3448 Date: Sat Oct 28 17:12:58 2006 +0200
3450 [PATCH] Add some missing machtypes for netstar & voiceblue boards
3452 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
3455 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3456 Signed-off-by: Stefan Roese <sr@denx.de>
3458 commit 856f054410cef52d868feb330168b2a4c4091328
3459 Author: Stefan Roese <sr@denx.de>
3460 Date: Sat Oct 28 15:55:52 2006 +0200
3462 [PATCH] NAND: Partition name support added to NAND subsystem
3464 chpart, nboot and NAND subsystem related commands now accept also partition
3465 name to specify offset.
3467 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3468 Signed-off-by: Stefan Roese <sr@denx.de>
3470 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
3471 Author: Wolfgang Denk <wd@pollux.denx.de>
3472 Date: Sat Oct 28 02:29:44 2006 +0200
3476 commit 2751a95abd1b96911081c357e96a12fa97b40dee
3477 Author: Wolfgang Denk <wd@pollux.denx.de>
3478 Date: Sat Oct 28 02:29:14 2006 +0200
3480 Enable commandline editing and hush shell on all TQM boards.
3482 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
3483 Author: Wolfgang Denk <wd@pollux.denx.de>
3484 Date: Sat Oct 28 02:28:02 2006 +0200
3486 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
3488 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
3489 Author: Wolfgang Denk <wd@denx.de>
3490 Date: Sat Oct 28 01:14:32 2006 +0200
3492 Check for illegal character '=' in environment variable names.
3494 Make sure the string passed as variable name does not contain a '='
3495 character. This not only prevents the common error or typing
3496 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
3497 also closes a backdoor which allowed to delete write-protected
3498 environment variables, for example by using "setenv ethaddr=".
3500 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
3501 Author: Wolfgang Denk <wd@pollux.denx.de>
3502 Date: Sat Oct 28 00:38:39 2006 +0200
3506 commit e11887a77d81077416a2d1c5e0354916fee8c034
3507 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
3508 Date: Thu Oct 26 17:55:31 2006 +0200
3510 Don't pass any debug options directly to the assembler
3512 When passing the -g option to gcc, gcc automatically selects a
3513 suitable --g<format> option to pass on to the assembler.
3514 Thus, there's no point in forcing a specific debug option on the
3515 assembler using the -Wa mechanism.
3517 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3519 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
3520 Author: Jon Loeliger <jdl@freescale.com>
3521 Date: Fri Oct 27 07:47:22 2006 -0500
3523 MPC86xx: Cleaned up unused and conditionally used local variables.
3525 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3527 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
3528 Author: Wolfgang Denk <wd@pollux.denx.de>
3529 Date: Fri Oct 27 11:55:21 2006 +0200
3531 Fix "ar" flags in some Makefiles to allow for silent "make -s"
3533 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
3534 Author: Ben Warren <bwarren@qstreams.com>
3535 Date: Thu Oct 26 14:38:25 2006 -0400
3537 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
3538 to a TSEC (e.g. a switch is connected via RMII) or
3539 if the PHY is defective/incorrectly configured.
3541 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3543 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
3544 Author: Ben Warren <bwarren@qstreams.com>
3545 Date: Thu Oct 26 14:38:25 2006 -0400
3547 Fix TSEC driver: avoid crashes if PHY is not attached
3548 to a TSEC (e.g. a switch is connected via RMII) or
3549 if the PHY is defective/incorrectly configured.
3551 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3553 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
3554 Author: Wolfgang Denk <wd@pollux.denx.de>
3555 Date: Thu Oct 26 16:24:31 2006 +0200
3559 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
3560 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
3561 Date: Wed Oct 25 15:48:59 2006 +0200
3563 Finish up support for the ATSTK1000/ATSTK1002 boards
3565 Add atstk1002_config target to Makefile and move the AVR32 section
3566 down below Blackfin so that it doesn't end up in the middle of
3569 Drop the autogenerated linker script thing for now. Will have to
3570 revisit how to handle chips with different flash and RAM layout
3573 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3575 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
3576 Author: Kumar Gala <galak@kernel.crashing.org>
3577 Date: Tue Oct 24 23:47:37 2006 -0500
3579 Added support for Multi-Image files that contain a device tree
3581 If a Multi-Image file contains a third image we try to use it as a
3582 device tree. The device tree image is assumed to be uncompressed in the
3583 image file. We automatically allocate space for the device tree in memory
3584 and provide an 8k pad to allow more than a reasonable amount of growth.
3586 Additionally, a device tree that was contained in flash will now automatically
3587 get copied to system memory as part of boot. Previously an error was
3588 reported if one tried to boot a device tree that was in flash.
3590 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3592 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
3593 Author: Wolfgang Denk <wd@denx.de>
3594 Date: Tue Oct 24 21:35:55 2006 +0200
3596 Switch to automatically generated CHANGELOG file.
3597 (use "make CHANGELOG" to update it from time to time)
3599 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
3600 Author: Stefan Roese <sr@denx.de>
3601 Date: Tue Oct 24 18:06:48 2006 +0200
3603 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
3604 Patch by Stefan Roese, 24 Oct 2006
3606 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
3607 Author: Wolfgang Denk <wd@pollux.denx.de>
3608 Date: Tue Oct 24 17:24:55 2006 +0200
3610 Merge with /home/wd/git/u-boot/master
3612 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
3613 Author: Wolfgang Denk <wd@pollux.denx.de>
3614 Date: Tue Oct 24 15:32:57 2006 +0200
3618 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
3619 Author: Wolfgang Denk <wd@pollux.denx.de>
3620 Date: Tue Oct 24 14:51:36 2006 +0200
3622 Move atstk1000 files into vendor specific directory.
3623 Patch by Haavard Skinnemoen, 12 Sep 2006
3625 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
3626 Author: Wolfgang Denk <wd@pollux.denx.de>
3627 Date: Tue Oct 24 14:42:37 2006 +0200
3629 Add ATSTK1000 and ATSTK1002 board support
3630 Patch by Haavard Skinnemoen, 06 Sep 2006
3632 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
3635 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
3636 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
3637 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
3638 CompactFlash cards. For more information, please see this page:
3640 http://www.atmel.com/dyn/products/tools.asp?family_id=682
3642 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
3645 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3647 commit f93ae788c3640fcde5db383471d45548ff4060d0
3648 Author: Wolfgang Denk <wd@pollux.denx.de>
3649 Date: Tue Oct 24 14:31:24 2006 +0200
3651 Add common serial driver for Atmel AT32 and AT91 chips
3652 Patch by Haavard Skinnemoen, 06 Sep 2006
3654 This is a first attempt at creating a common serial driver for Atmel
3655 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
3656 be possible to support AT91RM9200 and other ARM-based chips with some
3657 minor modifications.
3659 There's nothing fundamentally AVR32-specific in this driver, but it
3660 does use some features which are currently only defined for the
3662 * pm_get_clock_freq: Obtain the clock frequency of a given domain
3663 * gd->console_uart: A "struct device" containing information about
3664 register mappings, gpio resources and clocks associated with the
3667 For more information about these features, please see the "AT32AP
3670 commit 72a087e04705c26cad982879ebd06b5281bf825a
3671 Author: Wolfgang Denk <wd@pollux.denx.de>
3672 Date: Tue Oct 24 14:27:35 2006 +0200
3674 Add AT32AP CPU and AT32AP7000 SoC support
3675 Patch by Haavard Skinnemoen, 06 Sep 2006
3677 This patch adds support for the AT32AP CPU family and the AT32AP7000
3678 chip, which is the first chip implementing the AVR32 architecture.
3680 The AT32AP CPU core is a high-performance implementation featuring a
3681 7-stage pipeline, separate instruction- and data caches, and a MMU.
3682 For more information, please see the "AVR32 AP Technical Reference":
3684 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
3686 In addition to this, the AT32AP7000 chip comes with a large set of
3687 integrated peripherals, many of which are shared with the AT91 series
3688 of ARM-based microcontrollers from Atmel. Full data sheet is
3691 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
3693 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3695 commit 7b64fef33c66be648826c0ff9758298ef13d0604
3696 Author: Wolfgang Denk <wd@pollux.denx.de>
3697 Date: Tue Oct 24 14:21:16 2006 +0200
3699 Add AVR32 architecture support
3700 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
3702 This patch adds common infrastructure code for the Atmel AVR32
3703 architecture. See doc/README.AVR32 for details.
3705 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3707 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
3708 Author: Wolfgang Denk <wd@pollux.denx.de>
3709 Date: Tue Oct 24 13:57:33 2006 +0200
3711 Use -g instead of -gstabs in AFLAGS_DEBUG
3712 Patch by Haavard Skinnemoen, 30 Aug 2006
3714 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
3715 matter what the target's preferred debugging format is. This patch
3716 simply replaces -gstabs with -g, so that the default debugging format
3717 for the architecture is used.
3719 commit 965829872169c2996023840d98e1d85ad148d629
3720 Author: Wolfgang Denk <wd@pollux.denx.de>
3721 Date: Tue Oct 24 13:55:18 2006 +0200
3723 Fix/workaround broken dependency handling with make 3.81
3724 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
3726 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
3727 Author: Marian Balakowicz <m8@semihalf.com>
3728 Date: Mon Oct 23 22:17:05 2006 +0200
3730 Fix sequoia separate object direcory building problems.
3732 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
3733 Author: Jon Loeliger <jdl@freescale.com>
3734 Date: Fri Oct 20 17:16:35 2006 -0500
3736 Use generic I2C register block on 85xx and 86xx.
3738 Replace private IMMAP I2C structures with generic reg block
3739 and allow 86xx to have multiple I2C device busses.
3741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3743 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
3744 Author: Jon Loeliger <jdl@freescale.com>
3745 Date: Fri Oct 20 15:54:34 2006 -0500
3747 Fix compilation warnings on a few 85xx boards.
3749 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3751 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
3752 Author: Jon Loeliger <jdl@freescale.com>
3753 Date: Fri Oct 20 15:50:15 2006 -0500
3755 Converted all 85xx boards to use a common FSL I2C driver.
3756 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
3757 And removed hard i2c path from a few u-boot.lds scipts too.
3758 Minor whitespace cleanups along the way.
3760 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3762 commit 4d45f69e362b05892c9e92a7907e5820995612aa
3763 Author: Jon Loeliger <jdl@freescale.com>
3764 Date: Thu Oct 19 12:02:24 2006 -0500
3766 Rewrite a series of goto statements as a sequences of
3767 conditional expressions instead.
3769 Use consistent return code 0/-1 for good/bad indicators.
3771 Include one fewer file if the driver isn't used at all.
3773 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3775 commit 7237c033b02fe295880435f1eb80819a0c987532
3776 Author: Jon Loeliger <jdl@freescale.com>
3777 Date: Thu Oct 19 11:02:16 2006 -0500
3779 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
3781 in an effort to begin to unify the umpteen FSL I2C drivers that
3782 are all otherwise very similar.
3784 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3786 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
3787 Author: Jon Loeliger <jdl@freescale.com>
3788 Date: Thu Oct 19 11:33:52 2006 -0500
3790 * Fix a bunch of compiler warnings for gcc 4.0
3792 Signed-off-by: Matthew McClintock <msm@freescale.com>
3794 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
3795 Author: Stefan Roese <sr@denx.de>
3796 Date: Tue Oct 17 06:14:31 2006 +0200
3798 Add monitor functions for indirect access to PPC440 DCR's
3799 Patch by Leonid Baryudin, 12 Oct 2006
3801 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
3802 Author: Jon Loeliger <jdl@freescale.com>
3803 Date: Fri Oct 13 16:47:53 2006 -0500
3805 Fixed leading whitespace issues.
3806 Removed spurious LAWAR thing.
3808 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3810 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
3811 Author: Jon Loeliger <jdl@freescale.com>
3812 Date: Thu Oct 12 10:42:36 2006 -0500
3814 Remove unneeded include files and local variable.
3816 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3818 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
3819 Author: Grant Likely <grant.likely@secretlab.ca>
3820 Date: Tue Oct 10 00:23:32 2006 -0600
3822 Fix possible uninitialized variable compiler warning.
3824 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
3825 do_bootm_linux() may be uninitialized. There is no possibility in the
3826 current code that len will get used uninitialized, but this fix follows
3827 the existing convention of setting both len and data to zero at the same
3830 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3832 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
3833 Author: Matthew McClintock <msm@freescale.com>
3834 Date: Wed Oct 11 15:13:01 2006 -0500
3836 * Fix a bunch of compiler warnings for gcc 4.0
3838 Signed-off-by: Matthew McClintock <msm@freescale.com>
3840 commit bf651baa365e5447246aad6a633ccd667cf24a39
3841 Author: Jon Loeliger <jdl@freescale.com>
3842 Date: Wed Oct 11 10:10:43 2006 -0500
3844 Move "ar" flags to config.mk to allow for silent "make -s"
3846 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
3847 Author: Jon Loeliger <jdl@freescale.com>
3848 Date: Tue Oct 10 17:19:03 2006 -0500
3850 Coding style changes to remove local varible blocks
3851 and reformat a bit nicer.
3853 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
3854 Author: Jon Loeliger <jdl@freescale.com>
3855 Date: Tue Oct 10 17:16:04 2006 -0500
3857 Fix whitespace issues.
3859 commit 7b382b7125f2397cce63253df62f183e3dfa2770
3860 Author: Jon Loeliger <jdl@freescale.com>
3861 Date: Tue Oct 10 17:14:45 2006 -0500
3863 Fix whitespace issues.
3865 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
3866 Author: Jon Loeliger <jdl@freescale.com>
3867 Date: Tue Oct 10 17:06:53 2006 -0500
3869 Fix whitespace issues.
3871 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
3872 Author: Jon Loeliger <jdl@freescale.com>
3873 Date: Tue Oct 10 17:03:43 2006 -0500
3875 Ran lindent and cleaned up whitespace issues.
3876 Format for 80-columns too.
3878 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
3879 Author: Jon Loeliger <jdl@freescale.com>
3880 Date: Tue Oct 10 17:02:22 2006 -0500
3882 Fix whitespace and 80-col issues.
3884 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
3885 Author: Stefan Roese <sr@denx.de>
3886 Date: Sat Oct 7 11:36:51 2006 +0200
3888 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
3889 Patch by Stefan Roese, 07 Oct 2006
3891 commit 5bc528fa4da751d472397b308137238a6465afd2
3892 Author: Stefan Roese <sr@denx.de>
3893 Date: Sat Oct 7 11:35:25 2006 +0200
3895 Update ALPR code (NAND support working now)
3896 Patch by Stefan Roese, 07 Oct 2006
3898 commit 77d5034847d328753b80c46b83f960a14a26f40e
3899 Author: Stefan Roese <sr@denx.de>
3900 Date: Sat Oct 7 11:33:03 2006 +0200
3902 Remove compile warnings in fpga code
3903 Patch by Stefan Roese, 07 Oct 2006
3905 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
3906 Author: Stefan Roese <sr@denx.de>
3907 Date: Sat Oct 7 11:30:52 2006 +0200
3909 Add CONFIG_BOARD_RESET to configure board specific reset function
3910 Patch by Stefan Roese, 07 Oct 2006
3912 commit f55df18187e7a45cb73fec4370d12135e6691ae1
3913 Author: John Traill <john.traill@freescale.com>
3914 Date: Fri Sep 29 08:23:12 2006 +0100
3916 Fix missing tCycle/modfreq calculation.
3918 Signed-off-by: John Traill <john.traill@freescale.com>
3920 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
3921 Author: Andy Fleming <afleming@freescale.com>
3922 Date: Wed Sep 13 10:33:35 2006 -0500
3924 Updated config headers to add default FDT-based booting
3926 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
3927 Author: Andy Fleming <afleming@freescale.com>
3928 Date: Wed Sep 13 10:34:18 2006 -0500
3930 Add support for eTSEC 3 & 4 on 8548 CDS
3932 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
3933 This will only work on rev 1.3 boards (but doesn't break older boards)
3934 * Cleaned up some comments to reflect the expanded role of tsec
3937 commit 084d648b109c8984f83674043c1a7fa3885ef801
3938 Author: Andy Fleming <afleming@freescale.com>
3939 Date: Wed Sep 13 10:33:56 2006 -0500
3941 Added code to support 2.6.18 PCI changes in u-boot
3943 * Added code to swizzle the IRQ map for the PCI
3945 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
3946 Author: Jon Loeliger <jdl@freescale.com>
3947 Date: Tue Sep 19 09:34:10 2006 -0500
3949 Modified makefile for new build mechanism.
3951 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3953 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
3954 Author: Jon Loeliger <jdl@freescale.com>
3955 Date: Thu Sep 14 08:40:36 2006 -0500
3957 Handle 86xx SVR values according to the new Reference Manual.
3958 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
3959 by the byte in bits 16-23 instead.
3960 Thanks to Jason Jin for noticing.
3962 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3964 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
3965 Author: Zhang Wei <wei.zhang@freescale.com>
3966 Date: Mon Aug 28 14:25:31 2006 +0800
3968 Fixed an OF-tree off-by-one bug when adding a new property name.
3969 This bug will cause the kernel booting to pause a long time.
3971 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3972 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
3974 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
3975 Author: Jon Loeliger <jdl@freescale.com>
3976 Date: Tue Aug 29 11:05:09 2006 -0500
3978 Remove trailing empty lines.
3980 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
3981 Author: Jon Loeliger <jdl@freescale.com>
3982 Date: Tue Aug 29 09:48:49 2006 -0500
3984 Remove bogus msync and use volatile asm.
3986 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
3987 Author: Jon Loeliger <jdl@freescale.com>
3988 Date: Tue Aug 29 08:17:14 2006 -0500
3990 Add myself as maintainer for MPC8641HPCN.
3992 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
3993 Author: Zhang Wei <wei.zhang@freescale.com>
3994 Date: Mon Aug 28 14:25:31 2006 +0800
3996 Fixed an OF-tree off-by-one bug when adding a new property name.
3997 This bug will cause the kernel booting to pause a long time.
3999 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4001 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
4002 Author: Haiying Wang <haiying.wang@freescale.com>
4003 Date: Fri Aug 25 14:38:34 2006 -0400
4005 Change ramdiskaddr and dtbaddr
4006 Remove PEX fluff commands.
4008 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
4009 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4011 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
4012 Author: Matthew McClintock <msm@freescale.com>
4013 Date: Wed Aug 23 13:32:45 2006 -0500
4015 * Another small fix for booting with disable_of
4017 Signed-off-by: Matthew McClintock <msm@freescale.com>
4019 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
4020 Author: Jon Loeliger <jdl@freescale.com>
4021 Date: Wed Aug 23 11:04:43 2006 -0500
4023 Cleanup and lindent new AHCI driver.
4025 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
4026 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
4027 Date: Wed Aug 23 19:15:12 2006 +0800
4029 Add AHCI define and sata support for MPC8641HPCN board.
4031 Signed-off-by:Jason Jin<jason.jin@freescale.com>
4033 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
4034 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
4035 Date: Wed Aug 23 19:10:44 2006 +0800
4037 Add AHCI support to u-boot
4039 Add AHCI support in u-boot, enable the sata disk controllers which
4040 following the AHCI protocol.
4042 Signed-off-by:Jason Jin<jason.jin@freescale.com>
4044 commit d8ea2acf5f137cae99417df4f573d036ee384668
4045 Author: Zhang Wei <wei.zhang@freescale.com>
4046 Date: Wed Aug 23 17:54:32 2006 +0800
4048 Add dtb boot-up parameter to default boot commands.
4050 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4052 commit b93775c2036b99baa390ea425c4771895bbc63c4
4053 Author: Jon Loeliger <jdl@freescale.com>
4054 Date: Tue Aug 22 18:26:08 2006 -0500
4056 Cleanup even more poorly introduced whitespace.
4058 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
4059 Author: Jon Loeliger <jdl@freescale.com>
4060 Date: Tue Aug 22 18:07:00 2006 -0500
4062 Cleanup more poorly introduced whitespace.
4064 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
4065 Author: Jon Loeliger <jdl@freescale.com>
4066 Date: Tue Aug 22 17:54:05 2006 -0500
4068 Cleanup poorly introduced whitespace.
4070 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
4071 Author: Jon Loeliger <jdl@freescale.com>
4072 Date: Tue Aug 22 12:25:27 2006 -0500
4074 General indent and whitespace cleanups.
4076 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
4077 Author: Jon Loeliger <jdl@freescale.com>
4078 Date: Tue Aug 22 12:06:18 2006 -0500
4080 General indent and whitespace cleanups.
4082 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
4083 Author: Jon Loeliger <jdl@freescale.com>
4084 Date: Tue Aug 22 10:42:21 2006 -0500
4086 Cleanup compiler warnings.
4088 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
4089 Author: Matthew McClintock <msm@freescale.com>
4090 Date: Tue Aug 22 09:31:59 2006 -0500
4092 Fix disable_of booting
4094 Signed-off-by: Matthew McClintock <msm@freescale.com>
4096 commit 87a449c8ac396420cb24260f717ea9e6faa82047
4097 Author: Matthew McClintock <msm@freescale.com>
4098 Date: Tue Aug 22 09:23:55 2006 -0500
4100 Support for FDT in uImage format, error when using FDT from flash
4102 Signed-off-by: Matthew McClintock <msm@freescale.com>
4104 commit 75c299c38369d01addd5e054b8a16217b70f4a86
4105 Author: Haiying Wang <haiying.wang@freescale.com>
4106 Date: Tue Aug 15 15:12:55 2006 -0400
4108 Unlock cache before kernel starts up for MPC86xx
4110 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
4111 Author: Haiying Wang <haiying.wang@freescale.com>
4112 Date: Tue Aug 15 15:13:15 2006 -0400
4114 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
4116 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
4117 Author: Haiying Wang <haiying.wang@freescale.com>
4118 Date: Tue Aug 15 15:12:55 2006 -0400
4120 Unlock cache before kernel starts up for MPC86xx
4122 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
4123 Author: Haiying Wang <haiying.wang@freescale.com>
4124 Date: Tue Aug 15 15:13:15 2006 -0400
4126 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
4128 commit 86c8e17f25e972a7e272950a0735fad84e082b88
4129 Author: Matthew McClintock <msm@freescale.com>
4130 Date: Wed Aug 16 13:59:47 2006 -0500
4132 * Fix disable_of booting
4134 Signed-off-by: Matthew McClintock <msm@freescale.com>
4136 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
4137 Author: Matthew McClintock <msm@freescale.com>
4138 Date: Wed Aug 16 10:54:09 2006 -0500
4140 * Support for FDT in uImage format, error when using FDT from flash
4142 Signed-off-by: Matthew McClintock <msm@freescale.com>
4144 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
4145 Author: Stefan Roese <sr@denx.de>
4146 Date: Tue Aug 15 14:22:35 2006 +0200
4148 Add initial support for the ALPR board from Prodrive
4149 NAND needs some additional testing
4150 Patch by Heiko Schocher, 15 Aug 2006
4152 commit f0ff4692ff3372dec55074a8eb444943ab095abb
4153 Author: Stefan Roese <sr@denx.de>
4154 Date: Tue Aug 15 14:15:51 2006 +0200
4156 Add FPGA Altera Cyclone 2 support
4157 Patch by Heiko Schocher, 15 Aug 2006
4159 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
4160 Author: Jon Loeliger <jdl@freescale.com>
4161 Date: Mon Aug 14 15:33:38 2006 -0500
4163 Fix BAT0 to actually be cacheable, non-guarded as documented.
4165 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4167 commit 40bc83559db5745681909fd7382ae509567e116d
4168 Author: Jon Loeliger <jdl@freescale.com>
4169 Date: Wed Aug 9 15:32:16 2006 -0500
4171 Removed MPC8641HPCN DTS source file from build.
4172 It is no longer linked into U-Boot; its sources are
4173 now located in the kernel tree.
4175 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4177 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
4178 Author: Matthew McClintock <msm@freescale.com>
4179 Date: Wed Jun 28 10:47:03 2006 -0500
4181 * Switched default PCI speed for 8540 ADS back to 33MHz
4183 * Added comments and a printf to warn that PCI-X won't
4185 Patch by Andy Fleming 17-Mar-2006
4187 Signed-off-by: Andy Fleming <afleming@freescale.com>
4189 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
4190 Author: Matthew McClintock <msm@freescale.com>
4191 Date: Wed Jun 28 10:46:35 2006 -0500
4193 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
4195 Signed-off-by: Andy Fleming <afleming@freescale.com>
4197 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
4198 Author: Matthew McClintock <msm@freescale.com>
4199 Date: Wed Jun 28 10:46:13 2006 -0500
4201 * Added VIA configuration table
4203 * Added support for PCI2 on CDS
4204 Patch by Andy Fleming 17-Mar-2006
4206 Signed-off-by: Andy Fleming <afleming@freescale.com>
4208 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
4209 Author: Matthew McClintock <msm@freescale.com>
4210 Date: Wed Jun 28 10:45:41 2006 -0500
4212 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
4214 Signed-off-by: Andy Fleming <afleming@freescale.com>
4216 commit 97074ed9655309b64231bc2cee69fe85399f8055
4217 Author: Matthew McClintock <msm@freescale.com>
4218 Date: Wed Jun 28 10:45:17 2006 -0500
4220 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
4222 Signed-off-by: Andy Fleming <afleming@freescale.com>
4224 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
4225 Author: Matthew McClintock <msm@freescale.com>
4226 Date: Wed Jun 28 10:44:49 2006 -0500
4228 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
4230 Signed-off-by: Andy Fleming <afleming@freescale.com>
4232 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
4233 Author: Matthew McClintock <msm@freescale.com>
4234 Date: Wed Jun 28 10:44:23 2006 -0500
4236 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
4238 Signed-off-by: Andy Fleming <afleming@freescale.com>
4240 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
4241 Author: Matthew McClintock <msm@freescale.com>
4242 Date: Wed Jun 28 10:43:36 2006 -0500
4244 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
4246 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4248 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
4249 Author: Matthew McClintock <msm@freescale.com>
4250 Date: Wed Jun 28 10:43:00 2006 -0500
4252 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
4254 commit 5498d90312aad9f6bdbf047986027c35b03cd163
4255 Author: Matthew McClintock <msm@freescale.com>
4256 Date: Wed Jun 28 10:42:24 2006 -0500
4258 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
4260 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
4261 Author: Matthew McClintock <msm@freescale.com>
4262 Date: Wed Jun 28 10:41:37 2006 -0500
4264 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
4266 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
4267 Author: John Traill <john.traill@freescale.com>
4268 Date: Wed Aug 9 14:33:50 2006 +0100
4270 Add Rapidio support for the MPC8641HPCN
4272 Signed-off-by: John Traill <john.traill@freescale.com>
4274 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
4275 Author: John Traill <john.traill@freescale.com>
4276 Date: Tue Aug 8 11:32:43 2006 +0100
4278 Fix caslat calculation
4280 Signed-off-by: John Traill <john.traill@freescale.com>
4282 commit 709d3073e74153278e7904a70819bbef7df50e1a
4283 Author: Jon Loeliger <jdl@freescale.com>
4284 Date: Thu Aug 3 16:17:56 2006 -0500
4286 Convert to mac-address in ethernet nodes.
4288 commit 71748af833ca1017edf1415be376366ff2937d17
4289 Author: Haiying Wang <haiying.wang@freescale.com>
4290 Date: Fri Jul 28 12:41:35 2006 -0400
4292 Correct the irq value of DUART2
4294 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
4295 Author: Haiying Wang <haiying.wang@freescale.com>
4296 Date: Fri Jul 28 12:41:41 2006 -0400
4298 Change the space size of PEX IO in README
4300 commit 239db37c94f7a92941c4465feceb867c609241c5
4301 Author: Haiying Wang <haiying.wang@freescale.com>
4302 Date: Fri Jul 28 12:41:18 2006 -0400
4304 Move get_board_sys_clk to board directory
4306 commit 492900b985439fbce1a118afde1e35def870db03
4307 Author: John Traill <john.traill@freescale.com>
4308 Date: Fri Jul 28 09:03:54 2006 +0100
4310 Fix 8641HPCN pollution
4312 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
4313 Author: John Traill <john.traill@freescale.com>
4314 Date: Fri Jul 28 08:16:06 2006 +0100
4316 Fix 8641HPCN timebase
4318 commit c86360b830f1eecd7a72208575dde4f57879faea
4319 Author: Zhang Wei <wei.zhang@freescale.com>
4320 Date: Fri Jul 28 00:01:34 2006 +0800
4322 Fixed OF device tree of mpc86xxhpcn board.
4324 The changes works in with kernel irq mapping rework.
4326 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4328 commit bea3f28d285942bf3f7ab339ce85178ded544225
4329 Author: Haiying Wang <haiying.wang@freescale.com>
4330 Date: Wed Jul 12 10:48:05 2006 -0400
4332 Add support for reading and writing mac addresses to or from ID EEPROM.
4334 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
4335 With attached patch, we can use command "mac/mac read/mac save/"
4336 to read and write EEPROM under u-boot prompt.
4338 U-boot will calculate the checksum of EEPROM while bootup,
4339 if it is right, then u-boot will check whether the mac address
4340 of eTSEC0/1/2/3 is availalbe (non-zero).
4342 If there is mac address availabe in EEPROM, u-boot will use it,
4343 otherewise, u-boot will use the mac address defined in
4344 MPC8641HPCN.h. This matches the requirement to set unique mac address
4347 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
4348 Signed-off-by: York Sun <yorksun@freescale.com>
4350 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
4351 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
4352 Date: Thu Jul 13 10:35:10 2006 -0500
4354 Fixed initrd issue by define big RAM
4356 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
4358 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
4359 Author: Jason Jin <Jason.jin@freescale.com>
4360 Date: Fri Jul 7 10:01:45 2006 -0500
4362 We made a u-boot patch to fix the hang up issue
4363 when booting filesystem from ramdisk.
4365 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
4367 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
4368 Author: Matthew McClintock <msm@freescale.com>
4369 Date: Wed Jun 28 10:47:03 2006 -0500
4371 * Switched default PCI speed for 8540 ADS back to 33MHz
4372 * Added comments and a printf to warn that PCI-X won't
4374 Patch by Andy Fleming 17-Mar-2006
4376 Signed-off-by: Andy Fleming <afleming@freescale.com>
4378 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
4379 Author: Matthew McClintock <msm@freescale.com>
4380 Date: Wed Jun 28 10:46:35 2006 -0500
4382 * Fixed a bug where 8555 PCI code used the old variable and
4384 Patch by Andy Fleming 17-Mar-2006
4386 Signed-off-by: Andy Fleming <afleming@freescale.com>
4388 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
4389 Author: Matthew McClintock <msm@freescale.com>
4390 Date: Wed Jun 28 10:46:13 2006 -0500
4392 * Added VIA configuration table
4393 * Added support for PCI2 on CDS
4394 Patch by Andy Fleming 17-Mar-2006
4396 Signed-off-by: Andy Fleming <afleming@freescale.com>
4398 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
4399 Author: Matthew McClintock <msm@freescale.com>
4400 Date: Wed Jun 28 10:45:41 2006 -0500
4402 * Fixed PCI memory definitions
4403 Patch by Andy Fleming 17-Mar-2006
4405 Signed-off-by: Andy Fleming <afleming@freescale.com>
4407 commit 087454609e47295443af793a282cddcd91a5f49c
4408 Author: Matthew McClintock <msm@freescale.com>
4409 Date: Wed Jun 28 10:45:17 2006 -0500
4411 * Added support for initializing second PCI bus on 85xx
4412 Patch by Andy Fleming 17-Mar-2006
4414 Signed-off-by: Andy Fleming <afleming@freescale.com>
4416 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
4417 Author: Matthew McClintock <msm@freescale.com>
4418 Date: Wed Jun 28 10:44:49 2006 -0500
4420 * Added PCI-X #defines for PCI-X initialization
4421 Patch by Andy Fleming on 17-Mar-2006
4423 Signed-off-by: Andy Fleming <afleming@freescale.com>
4425 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
4426 Author: Matthew McClintock <msm@freescale.com>
4427 Date: Wed Jun 28 10:44:23 2006 -0500
4429 * Made sure the code which disables prefetch for PCI devices
4430 sets the size of the prefetch region to 0
4431 Patch by Andy Fleming on 17-Mar-2006
4433 Signed-off-by: Andy Fleming <afleming@freescale.com>
4435 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
4436 Author: Matthew McClintock <msm@freescale.com>
4437 Date: Wed Jun 28 10:43:36 2006 -0500
4439 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
4440 Patch by Jon Loeliger 17-Jan-2006
4442 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4444 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
4445 Author: Matthew McClintock <msm@freescale.com>
4446 Date: Wed Jun 28 10:43:00 2006 -0500
4448 * Removed the oftree.dts for stxxtx in light of the changes
4449 to the flat device tree handling code
4450 Patch by Matthew McClintock 26-June-2006
4452 commit 1b380ec225665e73959677f3893dc658c5925e05
4453 Author: Matthew McClintock <msm@freescale.com>
4454 Date: Wed Jun 28 10:42:24 2006 -0500
4456 * Patch to modify ft_build.c to update flat device trees in place
4457 Patch by Matthew McClintock 26-June-2006
4459 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
4460 Author: Matthew McClintock <msm@freescale.com>
4461 Date: Wed Jun 28 10:41:37 2006 -0500
4463 * Modify bootm command to support booting with flat device trees
4464 Patch by Matthew McClintock 26-June-2006
4466 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
4467 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
4468 Date: Wed Jun 28 08:43:56 2006 -0500
4470 Change Id to symbolic name for RTL8139
4472 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4474 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
4475 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
4476 Date: Tue Jun 27 18:12:10 2006 +0800
4478 Fix RTL8139 in big endian
4480 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
4481 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
4483 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
4484 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
4485 Date: Tue Jun 27 18:12:23 2006 +0800
4487 Fix Tsec bug when no link
4489 When tftp a non-exist file from the tftp server, u-boot will check
4490 the link of all eth port. The original file will return wrong link
4491 state on the no link ports.
4493 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
4495 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
4496 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
4497 Date: Tue Jun 27 18:12:02 2006 +0800
4499 Fix bug for io_bar size during pci scan
4501 During the pci scan process, Some devices return bar_reponse with the
4502 highest bytes 0, such as the pci bridge in uli1575 return bar_response
4503 with 0xffffff, So the bar_size should be manually set under 64K.
4505 Signed-off-by: Jason Jin <jason.jin@freescale.com>
4507 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
4508 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
4509 Date: Tue Jun 27 18:11:54 2006 +0800
4511 Enable PCIE1 for MPC8641HPCN board
4513 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4515 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
4516 Author: Jon Loeliger <jdl@freescale.com>
4517 Date: Thu Jun 22 08:51:46 2006 -0500
4519 Fix bug in 8641hpcn reset command with no args.
4521 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
4522 Acked-by: Jon Loeliger <jdl@freescale.com>
4524 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
4525 Author: Zhang Wei <wei.zhang@freescale.com>
4526 Date: Tue Jun 20 17:47:15 2006 +0800
4528 Reworked IRQ mapping in OF-tree.
4530 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
4531 Author: Jon Loeliger <jdl@freescale.com>
4532 Date: Thu Jun 15 21:33:37 2006 -0500
4534 Do not enable address translation on secondary CPUs.
4535 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
4537 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4539 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
4540 Author: Jon Loeliger <jdl@jdl.com>
4541 Date: Wed Jun 7 10:53:55 2006 -0500
4543 Fix a get_board_sys_clk() use-before-def warning.
4545 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4547 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
4548 Author: Jon Loeliger <jdl@jdl.com>
4549 Date: Wed Jun 7 10:52:49 2006 -0500
4551 Allow DTC path to be passed in.
4553 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4555 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
4556 Author: Haiying Wang <haiying.wang@freescale.com>
4557 Date: Tue Jun 6 16:54:29 2006 -0400
4559 Modify the IRQ of DUART2
4561 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
4562 Author: Jon Loeliger <jdl@jdl.com>
4563 Date: Wed May 31 13:55:35 2006 -0500
4567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4569 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
4570 Author: Jon Loeliger <jdl@jdl.com>
4571 Date: Wed May 31 12:44:44 2006 -0500
4573 White space cleanup.
4574 Some 80-column cleanups.
4575 Convert printf() to puts() where possible.
4576 Use #include "spd_sdram.h" as needed.
4577 Enhanced reset command usage message a bit.
4579 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4581 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
4582 Author: Jon Loeliger <jdl@jdl.com>
4583 Date: Wed May 31 11:39:34 2006 -0500
4585 Removed unneeded local_bus_init() from 8641HPCN board.
4587 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4589 commit 4d3d729c16c392d2982d3266b659d333c927697d
4590 Author: Jon Loeliger <jdl@jdl.com>
4591 Date: Wed May 31 11:24:28 2006 -0500
4593 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
4595 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4597 commit b2a941de060350ad15878d8219825f4950e9bb8e
4598 Author: Jon Loeliger <jdl@jdl.com>
4599 Date: Wed May 31 10:07:28 2006 -0500
4601 Remove dead debug code.
4603 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4605 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
4606 Author: Jon Loeliger <jdl@freescale.com>
4607 Date: Tue May 30 17:47:00 2006 -0500
4609 Move mpc86xx PIXIS code to board directory
4611 First cut at moving the PIXIS platform code out of
4612 the 86xx cpu directory and into board/mpc8641hpcn
4615 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4617 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
4618 Author: Haiying Wang <Haiying.Wang@freescale.com>
4619 Date: Tue May 30 09:10:32 2006 -0500
4621 Improve "reset" command's interaction with watchdog.
4623 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
4624 "reset altbank wd" will reset another bank WITH watch dog enabled
4625 "diswd" will disable watch dog after u-boot boots up successfully
4627 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4629 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
4630 Author: Haiying Wang <Haiying.Wang@freescale.com>
4631 Date: Tue May 30 08:51:19 2006 -0500
4633 Fix two SDRAM setup bugs.
4636 Enable 1T/2T based on number of DIMMs present.
4638 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4640 commit d11fec5015334deb2010e36ce00bb118cc5429a5
4641 Author: Haiying Wang <Haiying.Wang@freescale.com>
4642 Date: Fri May 26 10:24:48 2006 -0500
4644 Add first draft of the MPC8641HPCN doc/README.
4646 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4648 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
4649 Author: Haiying Wang <Haiying.Wang@freescale.com>
4650 Date: Fri May 26 10:13:04 2006 -0500
4652 Added pci@8000 block.
4653 Updated ethernet interrupt mappings (moved up 48).
4654 Cleaned up a few comments.
4656 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4658 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
4659 Author: Haiying Wang <Haiying.Wang@freescale.com>
4660 Date: Fri May 26 10:01:16 2006 -0500
4662 Allow args on reset command.
4664 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4666 commit 14e37081ff3cac7ebe6e93836523429853b6b292
4667 Author: Jon Loeliger <jdl@jdl.com>
4668 Date: Fri May 19 13:28:39 2006 -0500
4670 Change arbitration to round-robin for SMP linux.
4672 commit 9a655876e5995be80f49054e2509500e871e4d3a
4673 Author: Jon Loeliger <jdl@jdl.com>
4674 Date: Fri May 19 13:26:34 2006 -0500
4676 Enable dual DDR controllers and interleaving.
4678 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
4679 Author: Jon Loeliger <jdl@jdl.com>
4680 Date: Fri May 19 13:22:44 2006 -0500
4682 Update 86xx address map and LAWBARs.
4684 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
4685 Author: Jon Loeliger <jdl@jdl.com>
4686 Date: Fri May 19 13:14:15 2006 -0500
4688 Remove L2 Cache invalidate polling.
4690 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
4691 Author: Jon Loeliger <jdl@jdl.com>
4692 Date: Fri May 19 12:33:09 2006 -0500
4694 Enable 2nd CPU and I2C.
4696 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
4697 Author: Jon Loeliger <jdl@freescale.com>
4698 Date: Mon May 15 07:26:56 2006 -0500
4700 Update interrupt mapping.
4702 commit 6cfea33477b04b63ed47386ed1629529484c33ba
4703 Author: Haiying Wang <Haiying.Wang@freescale.com>
4704 Date: Wed May 10 09:38:06 2006 -0500
4706 Remove unneeded INIT_RAM_LOCK cache twiddling.
4707 Correctly tracks r29 as global data pointer now.
4709 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4711 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
4712 Author: Jon Loeliger <jdl@freescale.com>
4713 Date: Wed May 10 09:33:07 2006 -0500
4715 Remove unnecessary flash.c file.
4717 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
4718 Author: Jon Loeliger <jdl@freescale.com>
4719 Date: Tue May 9 08:23:49 2006 -0500
4721 Get MPC8641HPCN flash images working.
4723 Enable the CFI driver.
4724 Remove bogus LAWBAR7 cruft.
4725 Use correct TEXT_BASE, Fixup load script.
4726 Enable SPD EEPROM during DDR setup.
4727 Use generic RFC 1918 IP addresses by default.
4729 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
4730 Author: Jon Loeliger <jdl@freescale.com>
4731 Date: Thu Apr 27 10:15:16 2006 -0500
4733 Cleanup whitespaces and style issues.
4734 Removed //-style comments.
4735 Use 80-column lines.
4736 Remove trailing whitespace.
4737 Remove dead code and debug cruft.
4739 commit a2320a6bf8113a09544c42d160d10ac69d049a03
4740 Author: Jon Loeliger <jdl@freescale.com>
4741 Date: Thu Apr 27 08:22:39 2006 -0500
4743 Revert bad PCI prefetch limit change.
4745 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
4746 Author: Jon Loeliger <jdl@freescale.com>
4747 Date: Wed Apr 26 17:58:56 2006 -0500
4749 Initial support for MPC8641 HPCN board.