1 commit f7a35a60cf45491871a5c28e9ad24db005487857
2 Author: Heiko Schocher <hs@denx.de>
3 Date: Fri Oct 17 18:24:06 2008 +0200
5 mgcoge: add redundant environment sector
7 Signed-off-by: Heiko Schocher <hs@denx.de>
8 Signed-off-by: Wolfgang Denk <wd@denx.de>
10 commit c2537ee85954af9d036b18b644f3e18d837bf4a5
11 Author: Heiko Schocher <hs@denx.de>
12 Date: Fri Oct 17 18:23:27 2008 +0200
14 mgsuvd: update size of environment
16 Signed-off-by: Heiko Schocher <hs@denx.de>
18 commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
19 Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
20 Date: Thu Oct 16 13:38:00 2008 -0500
22 83xx NAND boot: wait for LTESR[CC]
24 At least some revisions of the 8313, and possibly other chips, do not
25 wait for all pages of the initial 4K NAND region to be loaded before
26 beginning execution; thus, we wait for it before branching out of the
29 This fixes warm reset problems when booting from NAND on 8313erdb.
31 Signed-off-by: Scott Wood <scottwood@freescale.com>
32 Acked-by: Kim Phillips <kim.phillips@freescale.com>
34 commit bf29e0ea0af03d593c64614136acc723a7a022a2
35 Author: Yuri Tikhonov <yur@emcraft.com>
36 Date: Fri Oct 17 12:54:18 2008 +0200
38 ppc4xx: PPC44x MQ initialization
40 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
41 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
42 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
44 Previously the appropriate initialization had been made in Linux, by the
45 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
46 registers after normal operation has begun is not supported and could
47 have unpredictable results.
49 Comment from Stefan: This patch doesn't change the resulting value of the
50 MQ registers. It explicitly sets/clears all bits to the desired state which
51 better documents the resulting register value instead of relying on pre-set
54 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
55 Signed-off-by: Stefan Roese <sr@denx.de>
57 commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
58 Author: Kumar Gala <galak@kernel.crashing.org>
59 Date: Thu Oct 16 21:58:50 2008 -0500
61 85xx: Using proper I2C source clock divider for MPC8544
63 The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
64 bit 26, instead it should be bit 28. This caused in incorrect
65 interpretation of the i2c_clk which is the same as the SEC clk on
66 MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
69 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
71 commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
72 Author: Kumar Gala <galak@kernel.crashing.org>
73 Date: Thu Oct 16 21:58:49 2008 -0500
75 Revert "85xx: Using proper I2C source clock divider for MPC8544"
77 This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
79 The fix introduced by this patch is not correct. The problem is
80 that the documentation is not correct for the MPC8544 with regards
81 to which bit in PORDEVSR2 is for the SEC_CFG.
83 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
85 commit 2179c4766bffeece98e5e92040629a96c97e230c
86 Author: Kumar Gala <galak@kernel.crashing.org>
87 Date: Wed Oct 15 10:19:41 2008 -0500
89 85xx: Fix compile warning
91 mpc8536ds.c: In function 'is_sata_supported':
92 mpc8536ds.c:614: warning: unused variable 'devdisr'
94 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
96 commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
97 Author: Jason Jin <Jason.jin@freescale.com>
98 Date: Wed Oct 15 10:40:24 2008 +0800
100 Fix the function conflict in x86emu when DEBUG is on
102 The function parse_line() in common/main.c was exposed globally by commit
103 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
104 name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
105 This patch fix this by renaming the function in the debug.c file.
107 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
109 commit b4dbacf69a669a17487054552fc2761149dd6767
110 Author: Wolfgang Denk <wd@denx.de>
111 Date: Wed Oct 15 15:50:45 2008 +0200
113 Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
115 Signed-off-by: Wolfgang Denk <wd@denx.de>
117 commit 374b9038293d01d8744a46af9b7854a6fd99b228
118 Author: Heiko Schocher <hs@denx.de>
119 Date: Wed Oct 15 09:51:19 2008 +0200
121 Fix compiler warning in lib_ppc/board.c
123 Fix compiler warning introduced by commit 0f8cbc18
125 Signed-off-by: Heiko Schocher <hs@denx.de>
126 Signed-off-by: Wolfgang Denk <wd@denx.de>
128 commit 9724555755a6f1066636481b41f7094e0ce93a69
129 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
130 Date: Thu Oct 9 10:29:14 2008 +0530
132 mpc83xx: wait till UPM completes the write to array
134 Reference manual states that MxMR[MAD] increment is the indication
135 of write to UPM array is complete. Honour that. Also, make the dummy
138 also fix the comment.
140 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
141 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
143 commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
144 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
145 Date: Wed Oct 8 18:12:20 2008 -0500
147 Remove unwanted ';' at end of define.
149 Currently this is not creating any problem. But it will result
150 in compilation error when used as below.
152 printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
154 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
156 continuation of the theme based on git grep "^#define CFG_.*;$" include/
158 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
160 commit b2934a56650e9a6c54432f9ce6dc36757967385e
161 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
162 Date: Mon Oct 6 10:53:59 2008 -0400
164 ARM DaVinci: Add maintainer information for SFFSDR board.
166 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
168 commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
169 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
170 Date: Sat Oct 4 19:26:16 2008 +0200
172 api: fix type mismatch
174 This patch fixes a type mismatch and thus removes a compiler
175 warning when compiling with CONFIG_API on powerpc.
177 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
179 commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
180 Author: Peter Tyser <ptyser@xes-inc.com>
181 Date: Wed Oct 1 12:25:04 2008 -0500
183 cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
185 Original code displayed:
187 i2c i2c speed [speed] - show or set I2C bus speed
188 i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
191 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
193 commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
194 Author: Wolfgang Denk <wd@denx.de>
195 Date: Tue Oct 14 22:13:41 2008 +0200
199 Signed-off-by: Wolfgang Denk <wd@denx.de>
201 commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
202 Author: Jason Jin <Jason.jin@freescale.com>
203 Date: Fri Oct 10 11:41:01 2008 +0800
205 Do not init SATA when disabled on 8536DS.
207 SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
208 driver still try to access the SATA registers, the cpu will hangup.
209 This patch try to fix this by reading the serdes status before the SATA
212 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
213 Acked-by: Andy Fleming <afleming@freescale.com>
215 commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
216 Author: Nikita V. Youshchenko <yoush@cs.msu.su>
217 Date: Fri Oct 3 00:03:55 2008 +0400
219 fsl_diu: fix alignment error that caused malloc corruption
221 When aligning malloc()ed screen_base, invalid offset was added.
222 This not only caused misaligned result (which did not cause hardware
223 misbehaviour), but - worse - caused screen_base + smem_len to
224 be out of malloc()ed space, which in turn caused breakage of
225 futher malloc()/free() operation.
227 This patch fixes screen_base alignment.
229 Also this patch makes memset() that cleans framebuffer to be executed
230 on first initialization of diu, not only on re-initialization. It looks
231 correct to clean the framebuffer instead of displaying random garbage;
232 I believe that was disabled only because that memset caused breakage
233 of malloc/free described above - which no longer happens with the fix
236 Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
238 commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
239 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
240 Date: Wed Sep 24 10:29:37 2008 +0200
242 api: Fix building with CONFIG_API
244 This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
246 USB_MAX_STOR_DEV is defined in include/usb.h, but
247 needed in api/api_storage.c.
249 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
251 commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
252 Author: Peter Tyser <ptyser@xes-inc.com>
253 Date: Tue Sep 23 12:39:40 2008 -0500
255 Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
257 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
259 commit 81e612014c40c922ec35488d17c504d4e9286f06
260 Author: Peter Tyser <ptyser@xes-inc.com>
261 Date: Tue Sep 23 12:38:42 2008 -0500
263 Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
265 The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
266 CFG_EEPROM_PAGE_WRITE_BITS in various temperature
267 sensor drivers are not necessary
269 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
271 commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
272 Author: Mike Frysinger <vapier@gentoo.org>
273 Date: Tue Oct 14 07:04:38 2008 -0400
275 cmd_spi: remove broken signed casting for display
277 Since we're working with unsigned data, you can't apply a signed pointer
278 cast and then attempt to print the result. Otherwise you get wrong output
279 when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
281 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
283 commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
284 Author: Mike Frysinger <vapier@gentoo.org>
285 Date: Tue Oct 14 07:05:24 2008 -0400
287 strings cmd: drop old CONFIG_CFG_STRINGS define
289 We don't need CONFIG_CFG_STRINGS anymore now that we have the define
290 CONFIG_CMD_STRINGS and Makefile control.
292 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
294 commit fecb5ade3b37f62981f2b05b621005850173aaa9
295 Author: Jason Jin <Jason.jin@freescale.com>
296 Date: Fri Sep 19 17:32:49 2008 +0800
298 Fix the NAND size overflow issue.
300 When the total size of all NAND devices exceeds 4 GiB, the size will
301 overflow. This patch tries to fix this.
303 Note that we still have a problem when a single NAND device is bigger
304 than 4 GiB: then the overflow would actually happen earlier, i. e.
305 when storing the size in nand_info[].size, as nand_info[].size is an
308 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
309 Signed-off-by: Wolfgang Denk <wd@denx.de>
311 commit 30f574717277238b9014b8136c90eea77196490f
312 Author: Louis Su <louis@asix.com.tw>
313 Date: Wed Jul 9 11:01:37 2008 +0800
315 AX88180: new gigabit network driver
317 Signed-off-by: Louis Su <louis@asix.com.tw>
318 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
320 commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
321 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
322 Date: Tue Aug 19 16:07:03 2008 +0200
324 enable 10/100M at VSC8601 at tsec driver
326 Currently VSC8601 doesn't link with 10/100M partners if the
327 EEPROM/Strapping is not set up.
328 Setting the auto-neg register fixes this.
330 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
331 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
333 commit 702c85b0e876d587c11acdbb55738ee52acd54f4
334 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
335 Date: Tue Sep 30 15:02:53 2008 +0900
337 net: ne2000: Divided a function of NE2000 driver
339 get_prom function was used __attriute__ , but it is not enable.
340 ax88796.o does not do link besides ne2000.o. When ld is carried
341 out, get_prom function of ax88796.c is ignored.
342 This problem is a thing by specifications of ld.
343 I checked and test this patch on SuperH and MIPS.
345 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
346 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
348 commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
349 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
350 Date: Tue Oct 14 11:10:59 2008 +0900
352 sh: rsk7203: Add smc911x driver support to board config file
354 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
355 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
357 commit cae6f909baf86357b3c0bd01acfc414348c4d175
358 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
359 Date: Thu Oct 9 13:54:33 2008 +0900
361 sh: Fix cannot execute a stand-alone application
363 Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
365 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
366 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
368 commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
369 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
370 Date: Wed Oct 8 23:38:00 2008 -0500
372 fsl_pci_init do not scan bus when configured as an end-point
374 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
375 Acked-by: Andy Fleming <afleming@freescale.com>
377 commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
378 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
379 Date: Tue Sep 16 17:07:53 2008 -0400
381 ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
383 This is no longer necessary now that the GD_FLG_RELOC flag is set for
386 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
388 commit d977a57356657ba241256231efca32828a5822f9
389 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
390 Date: Sat Sep 13 10:04:32 2008 +0200
392 Fix lzma uncompress call (image_start wrongly used instead image_len)
394 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
396 commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
397 Author: Nick Spence <nick.spence@freescale.com>
398 Date: Thu Aug 28 14:09:15 2008 -0700
400 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
402 This is needed in unlock_ram_in_cache() because it is called from C and
403 will corrupt the small data area anchor that is kept in R2.
405 lock_ram_in_cache() is modified similarly as good coding practice, but
406 is not called from C.
408 Signed-off-by: Nick Spence <nick.spence@freescale.com>
410 commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
411 Author: Kumar Gala <galak@kernel.crashing.org>
412 Date: Tue Aug 19 15:05:34 2008 -0500
414 86xx: remove redudant code with lib_ppc/interrupts.c
416 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
417 Not know how that happened, but there is no good reason for it.
419 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
422 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
424 commit 0d01f66d235118515b5086b88f82498bc0695d6a
425 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
426 Date: Thu Oct 9 01:26:36 2008 -0500
428 CFI: cfi_flash write fix for AMD legacy
430 The flash_unlock_seq requires a sector for AMD_LEGACY.
431 Fix a retcode check typeo.
433 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
434 Signed-off-by: Stefan Roese <sr@denx.de>
436 commit 542b385a620a1783454a00424930e51895f45073
437 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
438 Date: Tue Oct 7 13:13:10 2008 +0200
440 ppc4xx: Fix USB 2.0 phy reset sequence
442 This patch fixes USB 2.0 communication issues on some DU440 boards.
444 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
445 Signed-off-by: Stefan Roese <sr@denx.de>
447 commit df8c1ce11114c2260dedb5547281945f7db8fa5c
448 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
449 Date: Tue Oct 7 13:13:09 2008 +0200
451 ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
453 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
454 Signed-off-by: Stefan Roese <sr@denx.de>
456 commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
457 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
458 Date: Tue Oct 7 13:13:08 2008 +0200
460 ppc4xx: Fix DU440 GPIO configuration
462 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
463 Signed-off-by: Stefan Roese <sr@denx.de>
465 commit 35dd025c70fcc4389317db2f2a9d14795172137d
466 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
467 Date: Tue Oct 7 13:13:07 2008 +0200
469 ppc4xx: Update DU440 config
471 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
472 Signed-off-by: Stefan Roese <sr@denx.de>
474 commit f3bf9273939ffe1a60a32a2eef909097f15df56b
475 Author: Kumar Gala <galak@kernel.crashing.org>
476 Date: Wed Oct 8 15:36:39 2008 -0500
478 MPC8572DS: Fix compile warnings
480 Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
483 cmd_i2c.c:112: warning: missing braces around initializer
484 cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
486 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
488 commit dffd2446fb041f38ef034b0fcf41e51e5e489159
489 Author: Wolfgang Grandegger <wg@grandegger.com>
490 Date: Tue Sep 30 10:55:57 2008 +0200
492 85xx: Using proper I2C source clock divider for MPC8544
494 Measurements with our MPC8544 board showed that the I2C bus frequency
495 is wrong by a factor of 1.5. Obviously, the interpretation of the
496 MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
497 correct. There seems to be an error in the 8544 RM.
499 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
501 commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
502 Author: Rafal Czubak <rcz@semihalf.com>
503 Date: Wed Oct 8 13:41:30 2008 +0200
505 FSL: Fix get_cpu_board_revision() return value.
507 get_cpu_board_revision() returned board revision based on information stored
508 in global static struct eeprom. It should instead use one from local struct
509 board_eeprom, to which the data is actually read from EEPROM. The bug led to
510 system hang after printing L1 cache information on U-Boot startup. The problem
511 was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
512 boards using CFG_I2C_EEPROM_CCID.
514 The change has been successfully tested on MPC8555CDS system.
516 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
518 commit 747f316cca484ed627a97dd3391febabce384186
519 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
520 Date: Tue Sep 30 20:08:49 2008 +0200
522 update uImage FIT multi documentation
524 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
526 commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
527 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
528 Date: Tue Sep 30 20:08:36 2008 +0200
530 move README.imx31 to doc/ and merge with README.mx31
532 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
534 commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
535 Author: Guennadi Liakhovetski <lg@denx.de>
536 Date: Thu Sep 25 20:54:37 2008 +0200
538 i.MX31: switch to CFG_HZ=1000
540 Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
541 cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
542 provides 2% or 0.4% precision depending on the
543 CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
546 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
548 commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
549 Author: gnusercn <gnusercn@gmail.com>
550 Date: Wed Oct 8 18:58:58 2008 +0200
552 Fix bug: in arch-arm, env_get_char dose not work fine
554 due to the arm implementation which supposed that U-Boot is in RAM
555 when we jump to start_armboot
557 Signed-off-by: gnusercn <gnusercn@gmail.com>
558 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
560 commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
561 Author: Adam Graham <agraham@amcc.com>
562 Date: Mon Oct 6 10:16:13 2008 -0700
564 ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
566 After changing SDRAM_CLKTR phase value rerun the memory preload
567 initialization sequence (INITPLR) to reset and relock the memory
568 DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
569 adjustment effects the phase relationship of the internal, to the
570 PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
572 Signed-off-by: Adam Graham <agraham@amcc.com>
573 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
574 Signed-off-by: Stefan Roese <sr@denx.de>
576 commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
577 Author: Haiying Wang <Haiying.Wang@freescale.com>
578 Date: Fri Oct 3 11:48:03 2008 -0400
580 Remove redundant #define for MPC8536DS
582 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
584 commit 445a7b38308eb05b41de74165b20855db58c7ee5
585 Author: Haiying Wang <Haiying.Wang@freescale.com>
586 Date: Fri Oct 3 11:47:30 2008 -0400
588 Add ID EEPROM support for MPC8572DS
590 The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
591 system information like mac addresses etc. This patch enables it.
593 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
595 commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
596 Author: Haiying Wang <Haiying.Wang@freescale.com>
597 Date: Fri Oct 3 11:46:59 2008 -0400
599 Minor fixes for I2C address on MPC8572DS
601 MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
602 according to the board spec, and adds the 2nd i2c bus offset.
604 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
606 commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
607 Author: Jason Jin <Jason.jin@freescale.com>
608 Date: Sat Sep 27 14:40:57 2008 +0800
610 Fix the incorrect DDR clk freq reporting on 8536DS
612 On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
613 The display is still sync mode DDR freq. This patch try to fix
614 this. The display DDR freq is now the actual freq in both
617 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
619 commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
620 Author: Kumar Gala <galak@kernel.crashing.org>
621 Date: Tue Oct 7 10:28:46 2008 -0500
623 85xx: Remove setting of *cache-line-size in device trees
625 ePAPR says if the *cache-block-size is the same as *cache-line-size
626 than we don't need the *cache-line-size property.
628 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
630 commit cd3cb0d9269d155276b00207e3816a9347fd1c92
631 Author: Gerald Van Baren <vanbaren@cideas.com>
632 Date: Sat Oct 4 07:56:06 2008 -0400
634 libfdt: Fix error in documentation for fdt_get_alias_namelen()
636 Oops, screwed up the function name in the documenting comment for this
637 function. Trivial correction in this patch.
639 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
640 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
642 commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
643 Author: David Gibson <david@gibson.dropbear.id.au>
644 Date: Wed Aug 20 16:55:14 2008 +1000
646 libfdt: Add function to explicitly expand aliases
648 Kumar has already added alias expansion to fdt_path_offset().
649 However, in some circumstances it may be convenient for the user of
650 libfdt to explicitly get the string expansion of an alias. This patch
651 adds a function to do this, fdt_get_alias(), and uses it to implement
654 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
656 commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
657 Author: Mike Frysinger <vapier@gentoo.org>
658 Date: Thu Oct 2 01:55:38 2008 -0400
660 cfi_flash: do not reset flash when probe fails
662 The CFI flash driver starts at flash_init() which calls down into
663 flash_get_size(). This starts by calling flash_detect_cfi(). If said
664 function fails, flash_get_size() finishes by attempting to reset the
665 flash. Unfortunately, it does this with an info->portwidth set to 0x10
666 which filters down into flash_make_cmd() and that happily smashes the
667 stack by sticking info->portwidth bytes into a cfiword_t variable that
668 lives on the stack. On a 64bit system you probably won't notice, but
669 killing the last 8 bytes on a 32bit system usually leads to a corrupt
670 return address. Which is what happens on a Blackfin system.
672 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
673 Signed-off-by: Stefan Roese <sr@denx.de>
675 commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
676 Author: Stefan Roese <sr@denx.de>
677 Date: Fri Sep 26 17:03:26 2008 +0200
679 fdt: Overwrite /chosen node in bootm if it already exists in the dtb
681 Set force parameter in fdt_chosen() call in do_bootm_linux() call.
682 Without this, the chosen node is not overwritten if it already
685 Signed-off-by: Stefan Roese <sr@denx.de>
687 commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
688 Author: Jon Loeliger <jdl@freescale.com>
689 Date: Thu Sep 25 11:02:17 2008 -0500
691 Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
693 Using Gcc 4.3 detected this problem:
695 ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
696 ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
697 occur when assuming that (X + c) < X is always false
699 To fix the problem, treat the offset as an unsigned int.
701 The problem report and proposed fix were provided
702 by Steve Papacharalambous <stevep@freescale.com>.
704 Signed-off-by: Jon Loeliger <jdl@freescale.com>
706 commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
707 Author: David Gibson <david@gibson.dropbear.id.au>
708 Date: Fri Aug 29 14:19:13 2008 +1000
710 libfdt: Fix bugs in fdt_get_path()
712 The current implementation of fdt_get_path() has a couple of bugs,
715 First, contrary to its documentation, on success it returns the length
716 of the node's path, rather than 0. The testcase is correspondingly
717 wrong, and the patch fixes this as well.
719 Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
720 instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
721 Specifically this happens when there is insufficient space even to
722 hold the path's second last component. This behaviour is corrected,
723 and the testcase updated to check it.
725 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
727 commit 33af3e6656e84660d397b5dd95abab2dccc36f83
728 Author: Wolfgang Denk <wd@denx.de>
729 Date: Wed Oct 1 12:34:58 2008 +0200
731 TQM5200: enable support for ATAPI devices
733 Signed-off-by: Wolfgang Denk <wd@denx.de>
735 commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
736 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
737 Date: Mon Sep 15 05:48:25 2008 +0200
739 Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
741 we need this due to the arm implementation which supposed that U-Boot
742 is in RAM when we jump to start_armboot
744 This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
745 in order to do it for all arm board
747 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
749 commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
750 Author: Kim Phillips <kim.phillips@freescale.com>
751 Date: Wed Sep 24 08:46:25 2008 -0500
753 mpc83xx: don't disable autoboot
755 bootdelay set to -1 'permanently' disables autobooting, even if
756 bootcmd is specified. Change to a positive value to allow
757 autobooting when a bootcmd is set.
759 Reported-by: Coray Tate <Coray.Tate@freescale.com>
760 Cc: Scott Wood <scottwood@freescale.com>
761 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
763 commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
764 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
765 Date: Wed Sep 24 10:42:15 2008 +0900
767 mpc83xx: Fix typo in include/mpc83xx.h
769 Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
771 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
772 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
774 commit 162c41c03179727a1d14262f703c9a8bc40231fa
775 Author: Kim Phillips <kim.phillips@freescale.com>
776 Date: Tue Sep 23 09:38:49 2008 -0500
778 mpc83xx: add h/w flash protection to board configs
780 the operating system may leave flash in a h/w locked state after writing.
781 This allows u-boot to continue to write flash by enabling h/w unlocking
784 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
786 commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
787 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
788 Date: Thu Sep 11 21:35:36 2008 +0400
790 mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
792 The spd_dram code shifts the base address, then masks 20 bits, but
793 forgets to shift the base address back. Fix this by just masking the
794 base address correctly.
796 Found this bug while trying to relocate a DDR memory at the base != 0.
798 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
799 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
801 commit 8fd4166c467a46773f80208bda1ec3b4757747bc
802 Author: Stefan Roese <sr@denx.de>
803 Date: Mon Sep 22 16:10:43 2008 +0200
805 ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
807 Depending on the configuration jumper "SATA SELECT", U-Boot disabled
808 either one PCIe node or the SATA node in the device tree blob. This
809 patch removes the unnecessary and even confusing warning, when the node
812 Signed-off-by: Stefan Roese <sr@denx.de>
814 commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
815 Author: Remy Bohmer <linux@bohmer.net>
816 Date: Fri Sep 19 13:30:06 2008 +0200
818 Add missing device types to dev_print() in part.c
820 Signed-off-by: Remy Bohmer <linux@bohmer.net>
822 commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
823 Author: Wolfgang Denk <wd@denx.de>
824 Date: Mon Sep 22 22:23:06 2008 +0200
826 Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
827 eventually leads to a machine check. This change assures that DPRAM
828 is allocated only once in that case.
830 Signed-off-by: Gary Jennejohn <garyj@denx.de>
831 Signed-off-by: Wolfgang Denk <wd@denx.de>
833 commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
834 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
835 Date: Wed Sep 17 17:57:34 2008 +0200
837 Fix Spartan-3 definitions.
839 A few Spartan-3 definitions erroneously use Spartan-3E size
840 constants. This patch fixes them.
842 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
844 commit 28113e1f0da4146b823ffce37680d31d5685a60b
845 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
846 Date: Wed Sep 17 17:41:58 2008 +0200
848 Remove duplicate Spartan-3E definition.
850 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
851 Signed-off-by: Wolfgang Denk <wd@denx.de>
853 commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
854 Author: Anatolij Gustschin <agust@denx.de>
855 Date: Wed Sep 17 13:46:17 2008 +0200
857 socrates: change default mtest address range
859 Running mtest command on socrates without specifying
860 an address range crashes the board. This patch changes
861 default mtest address range to prevent this behavior.
863 Signed-off-by: Anatolij Gustschin <agust@denx.de>
865 commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
866 Author: Anatolij Gustschin <agust@denx.de>
867 Date: Wed Sep 17 12:34:45 2008 +0200
869 socrates: fix crash after relocation
871 Currently U-Boot crashes after relocation to RAM.
872 Changing the CPO value of the DDR SDRAM TIMING_CFG_2
873 register to READ_LAT + 1 (to the value it was before
874 conversion of socrates to new DDR code) fixes the
877 Signed-off-by: Anatolij Gustschin <agust@denx.de>
879 commit 562788b0a303f3528b920d81f547f5ca77ba528e
880 Author: Anatolij Gustschin <agust@denx.de>
881 Date: Wed Sep 17 11:45:51 2008 +0200
883 socrates: fix SPD EEPROM address
885 Commit be0bd8234b9777ecd63c4c686f72af070d886517
886 changed SPD EEPROM address to 0x51 and DDR SDRAM
887 detection stopped working. Change this address
890 Signed-off-by: Anatolij Gustschin <agust@denx.de>
892 commit 023824549a370bd185d7129d9a6c86f9be7b86a8
893 Author: Stefan Roese <sr@denx.de>
894 Date: Mon Sep 22 11:06:50 2008 +0200
896 Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
898 This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
900 Signed-off-by: Stefan Roese <sr@denx.de>
902 commit b5d10a13525c07ec6374adf840d7c87553b5f189
903 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
904 Date: Thu Sep 18 19:34:36 2008 +0900
906 sh: Fix compile warning
908 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
910 commit 4a065abf926f128beb36d93449defa0d690e7fef
911 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
912 Date: Thu Sep 18 19:04:26 2008 +0900
914 sh: Add support watchdog for SH4A core
916 Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
917 And fix some compile warning.
919 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
921 commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
922 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
923 Date: Wed Sep 17 11:45:26 2008 +0900
925 sh: Fix typo in SH serial driver
927 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
928 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
930 commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
931 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
932 Date: Wed Sep 17 11:08:36 2008 +0900
934 sh: Add support any page size and empty_zero_page to SH Linux uImage
936 Old U-Boot supported 4KB page size only. If this version, Linux
937 kernel can not get command line from U-Boot.
938 SH Linux kernel can change page size and empty_zero_page.
939 This patch support this function and fix promlem.
941 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
942 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
944 commit ce9f99ddb59628f41dc534e892368a7d66dfc774
945 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
946 Date: Thu Aug 28 13:40:52 2008 +0900
948 sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
950 Add function of smc911x, pkt_data_pull and pkt_data_push.
952 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
953 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
955 commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
956 Author: Wolfgang Denk <wd@denx.de>
957 Date: Thu Sep 18 13:57:32 2008 +0200
959 ADS5121: fix typo in "rootpath" default setting
961 Signed-off-by: Wolfgang Denk <wd@denx.de>
963 commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
964 Author: Wolfgang Denk <wd@denx.de>
965 Date: Wed Sep 17 10:17:55 2008 +0200
967 Coding style cleanup; update CHANEGLOG
969 Signed-off-by: Wolfgang Denk <wd@denx.de>
971 commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
972 Author: Victor Gallardo <vgallardo@amcc.com>
973 Date: Tue Sep 16 06:59:13 2008 -0700
975 ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
977 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
978 Signed-off-by: Adam Graham <agraham@amcc.com>
979 Signed-off-by: Stefan Roese <sr@denx.de>
981 commit ce47eb402c5e29a025399dc282246414fc492940
982 Author: Peter Tyser <ptyser@xes-inc.com>
983 Date: Tue Sep 16 10:04:47 2008 -0500
985 Support for multiple SGMII/TBI interfaces for TSEC ethernet
987 Fix TBI PHY accesses to use the proper offset in CPU register space. The
988 previous code would incorrectly access the TBI PHY by reading/writing to CPU
989 register space at the same location as would be used to access external PHYs.
991 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
992 Acked-by: Andy Fleming <afleming@freescale.com>
994 commit 7c803be2eb3cae245dedda438776e08fb122250f
995 Author: Wolfgang Denk <wd@denx.de>
996 Date: Tue Sep 16 18:02:19 2008 +0200
998 TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
1000 After switching to using the CFI flash driver, the correct remapping
1001 of the flash banks was forgotten.
1003 Also, some boards were not adapted, and the old legacy flash driver
1004 was not removed yet.
1006 Signed-off-by: Wolfgang Denk <wd@denx.de>
1008 commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
1009 Author: Wolfgang Denk <wd@denx.de>
1010 Date: Sun Sep 14 00:59:35 2008 +0200
1012 Prepare v2008.10-rc2
1014 Signed-off-by: Wolfgang Denk <wd@denx.de>
1016 commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
1017 Author: Wolfgang Denk <wd@denx.de>
1018 Date: Sat Sep 13 02:23:05 2008 +0200
1020 Coding style cleanup, update CHANGELOG
1022 Signed-off-by: Wolfgang Denk <wd@denx.de>
1024 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
1025 Author: Peter Tyser <ptyser@xes-inc.com>
1026 Date: Wed Sep 10 09:18:34 2008 -0500
1028 Update mailing list email and archive addresses
1030 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1032 commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
1033 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
1034 Date: Thu Sep 11 15:40:01 2008 +0200
1036 85xx: socrates: autoprobe Lime chip
1038 This patch is an attempt to implement autoprobing for the Lime
1039 presence on the bus.
1040 Configure GPCM for Lime CS2 and try to access chip ID registers.
1041 Second read atempt delivers register values if the chip is present.
1043 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1045 commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
1046 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
1047 Date: Thu Sep 11 15:40:01 2008 +0200
1049 85xx: socrates: Add support for new image format.
1051 Signed-off-by: Detlev Zundel <dzu@denx.de>
1053 commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
1054 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
1055 Date: Thu Sep 11 17:28:18 2008 +0900
1057 sh: Fix compile error for r2dplus
1059 netdev.h was not include by r2dplus.
1061 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
1063 commit 56844a22b76c719e600047e23b80465a44d76abd
1064 Author: Heiko Schocher <hs@denx.de>
1065 Date: Thu Sep 11 08:11:23 2008 +0200
1067 powerpc: Fix bootm to boot up again with a Ramdisk
1069 Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
1070 and this stopped Linux from booting with a Ramdisk. This patch fixes
1071 this, by deleting the useless dummy mem reservation.
1073 When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
1074 added to of_size, so we dont need anymore a dummy mem reservation.
1076 I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
1077 system (=0x44 bytes) and rounded it up to 0x80).
1079 Signed-off-by: Heiko Schocher <hs@denx.de>
1080 Acked-by: Kumar Gala <galak@kernel.crashing.org>
1082 commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
1083 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
1084 Date: Mon Sep 8 02:46:13 2008 +0200
1086 Add support for LZMA uncompression algorithm.
1088 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
1089 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1091 commit 0008b6d968160abe2bfd936493f3a516a7c8da20
1092 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
1093 Date: Fri Jun 27 23:04:20 2008 +0400
1095 fsl_elbc_nand: ecclayout cleanups
1097 This patch deletes oobavail assignments, they're calculated by the nand
1098 core code in nand_scan_tail, plus current oobavail values are wrong for
1101 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
1102 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
1103 Signed-off-by: Scott Wood <scottwood@freescale.com>
1105 commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
1106 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
1107 Date: Fri Jun 27 23:04:13 2008 +0400
1109 fsl_elbc_nand: implement support for flash-based BBT
1111 This patch implements support for flash-based BBT for chips working
1112 through ELBC NAND controller, so that NAND core will not have to re-scan
1113 for bad blocks on every boot.
1115 Because ELBC controller may provide HW-generated ECCs we should adjust
1116 bbt pattern and bbt version positions in the OOB free area.
1118 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
1119 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
1120 Signed-off-by: Scott Wood <scottwood@freescale.com>
1122 commit 97ae023648e764f794ffb9c52da109d6caf09c47
1123 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
1124 Date: Fri Jun 27 23:04:04 2008 +0400
1126 fsl_elbc_nand: fix OOB workability for large page NAND chips
1128 For large page chips, nand_bbt is looking into OOB area, and checking
1129 for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
1130 reserved for bbt means.
1132 But ELBC driver is specifying ecclayout so that oobfree area starts at
1133 offset 1, so only one byte left for the bbt purposes.
1135 This causes problems with any OOB users, namely JFFS2: after first mount
1136 JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
1138 OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
1139 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
1140 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
1141 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
1143 And on the next boot, NAND core will rescan for bad blocks, then will
1144 see "0xff 0x19" pattern, and will mark all blocks as bad ones.
1146 To fix the issue we should implement our own bad block pattern: just one
1147 byte at OOB start. Though, this will work only for x8 chips. For x16
1148 chips two bytes must be checked. Since ELBC driver does not support x16
1149 NANDs (yet), we're safe for now.
1151 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
1152 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
1153 Signed-off-by: Scott Wood <scottwood@freescale.com>
1155 commit 7238ada313057a85409485b8ee21515dc10c07a5
1156 Author: Wolfgang Denk <wd@denx.de>
1157 Date: Fri Sep 12 13:52:21 2008 +0200
1159 MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
1161 Signed-off-by: Wolfgang Denk <wd@denx.de>
1163 commit b18410e508a12ba0a177dfc2a386857c806fa96d
1164 Author: Stefan Roese <sr@denx.de>
1165 Date: Thu Sep 11 13:05:56 2008 +0200
1167 ppc4xx: Enable device tree (FDT) support in zeus board port
1169 Signed-off-by: Stefan Roese <sr@denx.de>
1171 commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
1172 Author: Stefan Roese <sr@denx.de>
1173 Date: Wed Sep 10 16:53:47 2008 +0200
1175 ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
1177 This patch fixes a problem introdiced with patch
1178 bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
1181 The boards affected are:
1188 Signed-off-by: Stefan Roese <sr@denx.de>
1190 commit 61737c59a3285f6fadf96a5836879898c04ec28d
1191 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1192 Date: Thu Sep 11 19:41:26 2008 -0400
1194 ppc4xx: Add .gitignore file to xilinx-ppc440 boards
1196 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1197 Signed-off-by: Stefan Roese <sr@denx.de>
1199 commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
1200 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1201 Date: Thu Sep 11 19:41:25 2008 -0400
1203 ppc4xx: Fix compilation of v5fx30teval_flash
1205 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1206 Signed-off-by: Stefan Roese <sr@denx.de>
1208 commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
1209 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1210 Date: Wed Sep 10 17:44:30 2008 -0400
1212 ppc4xx: Fix in-tree build for ppc440-generic boards
1214 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1215 Signed-off-by: Stefan Roese <sr@denx.de>
1217 commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
1218 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1219 Date: Fri Sep 12 02:20:47 2008 +0200
1221 ARM: synchronize mach-types.h with linux 2.6.27-rc6
1223 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1225 commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
1226 Author: Jens Scharsig <esw@bus-elektronik.de>
1227 Date: Fri Sep 12 02:20:47 2008 +0200
1229 at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
1231 This patch prevents linker error on AT91RM9200 boards, if
1232 CONFIG_CMD_I2_TREE is set.
1233 It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
1235 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
1237 commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
1238 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1239 Date: Fri Sep 12 02:20:47 2008 +0200
1241 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
1243 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
1245 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1247 commit 03db53335c8eba656a7c44d1555b1a4514383e33
1248 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1249 Date: Fri Sep 12 02:20:46 2008 +0200
1251 make: Remove redundant __ARM__ addition when cross-compiling on *BSD
1253 __ARM__ is given by arm_config.mk automatically.
1255 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1257 commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
1258 Author: Claudio Scordino <claudio@evidence.eu.com>
1259 Date: Fri Sep 12 02:20:46 2008 +0200
1261 Fix MACH_TYPE for the AT91RM9200DK board.
1263 Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
1265 commit 274737e5eb25b2bcd3af3a96da923effd543284f
1266 Author: Andrew Dyer <adyer@righthandtech.com>
1267 Date: Fri Sep 12 02:20:46 2008 +0200
1269 i.mx change get_timer(base) to return time since base
1271 This patch changes get_timer() for i.MX to return the time since
1272 'base' instead of the time since the counter was at zero.
1274 Symptom seen is flash timeout errors when erasing or programming a
1275 sector using the common cfi flash code.
1277 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
1279 commit 48fed40575b3e8eae960eb0141509ddd9a73012a
1280 Author: Andrew Dyer <adyer@righthandtech.com>
1281 Date: Fri Sep 12 02:20:46 2008 +0200
1283 i.MX use u-boot baud rate and don't assume UART master clock
1285 1) Change the i.MX serial driver to use the baud rate set in the
1288 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
1290 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
1291 one to clear" like other status bits in the reg.)
1293 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
1295 commit 6e1551a870d360805b9d172dc56d935064abe71d
1296 Author: Andrew Dyer <adyer@righthandtech.com>
1297 Date: Fri Sep 12 02:20:46 2008 +0200
1299 arm920t fix constant error in start.S
1301 Code in cpu/arm920t/start.S will die with a compilation error if
1302 CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
1303 the ARM sub instruction. Change the code so that each is subtracted
1304 independently to avoid the error.
1306 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
1308 commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
1309 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
1310 Date: Fri Sep 12 02:20:40 2008 +0200
1312 ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
1314 - Correct Invalid #define of MPUTIM_PTV_MASK for
1315 omap1510 & omap730 register definition
1317 MPUTIM_PTV_MASK is defined as
1318 #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
1320 while it should have been
1321 #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
1323 - Below Patch corrects the same
1325 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
1327 commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
1328 Author: Adrian Filipi <adrian.filipi@eurotech.com>
1329 Date: Fri Jul 18 11:52:02 2008 -0400
1331 Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
1333 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
1335 commit eb16135df20535b0d19969f50fb5bd17f95e9c25
1336 Author: Guennadi Liakhovetski <lg@denx.de>
1337 Date: Thu Aug 28 12:25:11 2008 +0200
1339 i.MX31: document timer precision option
1341 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1343 commit 1a6337b01351b82a45b0defa76f08744511c580b
1344 Author: Magnus Lilja <lilja.magnus@gmail.com>
1345 Date: Fri Aug 29 10:36:18 2008 +0200
1347 i.MX31: Make the SPI bus and chip select configurable for MC13783
1349 The i.MX31 has three SPI buses and each bus has several chip selects
1350 and the MC13783 chip can be connected to any of these. The current
1351 RTC driver for MC13783 is hardcoded for CSPI2/SS2.
1353 This patch makes make MC13783 SPI bus and chip select configurable
1354 via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
1356 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
1358 commit 8c4ebec25b21e355b8488698ec1594da9701fff4
1359 Author: Magnus Lilja <lilja.magnus@gmail.com>
1360 Date: Fri Aug 29 10:36:17 2008 +0200
1362 i.MX31: Add reset_timer() and modify get_timer_masked().
1364 This patch adds the reset_timer() function (needed by nand_base.c) and
1365 modifies the get_timer_masked() to work in the same way as the omap24xx
1368 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
1370 commit deeec4991a55de243787002ede24d2331d234fc8
1371 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1372 Date: Wed Sep 10 22:48:09 2008 +0200
1374 ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
1376 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1378 commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
1379 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1380 Date: Wed Sep 10 22:48:09 2008 +0200
1382 bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
1384 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1386 commit 0e8d158664a913392cb01fb11a948d83f72e105e
1387 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1388 Date: Wed Sep 10 22:48:06 2008 +0200
1390 rename CFG_ENV macros to CONFIG_ENV
1392 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1394 commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
1395 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1396 Date: Wed Sep 10 22:48:05 2008 +0200
1398 nvedit: rename error comment to CONFIG_ENV_IS_IN_
1400 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1402 commit b64b775e7546ed138df360ceb3a71ee358cb9a01
1403 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1404 Date: Wed Sep 10 22:48:05 2008 +0200
1406 cmd_mem: Move conditional compilation to Makefile
1408 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1410 commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
1411 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1412 Date: Wed Sep 10 22:48:05 2008 +0200
1414 move cmd_get_data_size to command.c
1416 add CMD_DATA_SIZE macro to enable it
1418 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1420 commit 507641d2491980531932b9f25dab37fe5e6c3a1a
1421 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1422 Date: Wed Sep 10 22:48:04 2008 +0200
1424 env_flash: Move conditional compilation to Makefile
1426 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1428 commit 5a1aceb0689e2f731491838970884a673ef7e7d3
1429 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1430 Date: Wed Sep 10 22:48:04 2008 +0200
1432 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
1434 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1436 commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
1437 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1438 Date: Wed Sep 10 22:48:03 2008 +0200
1440 cleanup use of CFG_ENV_IS_IN_FLASH
1442 - #if CFG_ENV_IS_IN_FLASH
1443 - #if (CFG_ENV_IS_IN_FLASH == 1)
1444 - #define CFG_ENV_IS_IN_FLASH 0
1446 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1448 commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
1449 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1450 Date: Wed Sep 10 22:48:01 2008 +0200
1452 rename environment.c in env_embedded.c to reflect is functionality
1454 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1456 commit c0878af6e32f0fd8e13a6ca315b9add64441115a
1457 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1458 Date: Wed Sep 10 22:48:01 2008 +0200
1460 env_nowhere: Move conditional compilation to Makefile
1462 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1464 commit 93f6d72544da4510a146bc4c93d609b0116cde37
1465 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1466 Date: Wed Sep 10 22:48:00 2008 +0200
1468 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
1470 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1472 commit 2556ef78113b5f089dfcac5da90bf31dd568397b
1473 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1474 Date: Wed Sep 10 22:48:00 2008 +0200
1476 env_sf: Move conditional compilation to Makefile
1478 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1480 commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
1481 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1482 Date: Wed Sep 10 22:48:00 2008 +0200
1484 rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
1486 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1488 commit 55c5f49910ec8225347aa1d211352a84de6649b4
1489 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1490 Date: Wed Sep 10 22:48:00 2008 +0200
1492 env_onenand: Move conditional compilation to Makefile
1494 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1496 commit 9656138ff1a34d4c4768db6b490deffc40ee674b
1497 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1498 Date: Wed Sep 10 22:47:59 2008 +0200
1500 rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
1502 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1504 commit 957a0e69575683efd70ace147746bbb3d8e7c501
1505 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1506 Date: Wed Sep 10 22:47:59 2008 +0200
1508 env_nvram: Move conditional compilation to Makefile
1510 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1512 commit 9314cee6917444ab88bd4e758da7a30975120187
1513 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1514 Date: Wed Sep 10 22:47:59 2008 +0200
1516 rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
1518 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1520 commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
1521 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1522 Date: Wed Sep 10 22:47:59 2008 +0200
1524 env_nand: Move conditional compilation to Makefile
1526 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1528 commit 51bfee192099206a4397f15f3b93516e01f58ab0
1529 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1530 Date: Wed Sep 10 22:47:58 2008 +0200
1532 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
1534 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1536 commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
1537 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1538 Date: Wed Sep 10 22:47:58 2008 +0200
1540 env_dataflash: Move conditional compilation to Makefile
1542 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1544 commit 057c849c45b9ee19df8ff3acdeee66be52819962
1545 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1546 Date: Wed Sep 10 22:47:58 2008 +0200
1548 rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
1550 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1552 commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
1553 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1554 Date: Wed Sep 10 22:47:52 2008 +0200
1556 cmd_eeprom: Move conditional compilation to Makefile
1558 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1560 commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
1561 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1562 Date: Fri Sep 5 09:19:54 2008 +0200
1564 env_eeprom: Move conditional compilation to Makefile
1566 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1568 commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
1569 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1570 Date: Fri Sep 5 09:19:30 2008 +0200
1572 rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
1574 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1576 commit 32628c5008105a732212003d83b75f05e5243bb2
1577 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1578 Date: Sat Aug 30 23:54:58 2008 +0200
1580 cmd_mac: Move conditional compilation to Makefile
1582 finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
1583 start in commit ad8f8687b78c3e917b173f038926695383c55555
1585 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1587 commit e5648acab153f0f429bfc714902c5aaa7879f71b
1588 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1589 Date: Sat Aug 30 23:47:41 2008 +0200
1591 cmd_fdc: Move conditional compilation to Makefile
1593 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1595 commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
1596 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1597 Date: Sat Aug 30 23:47:38 2008 +0200
1599 common/Makefile: add core command section
1601 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1603 commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
1604 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1605 Date: Sat Aug 30 23:29:57 2008 +0200
1607 cmd_vfd: Move conditional compilation to Makefile
1609 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1611 commit 6644641d072aee3087da129d8443187196a4d8a9
1612 Author: Scott Wood <scottwood@freescale.com>
1613 Date: Wed Sep 10 11:48:49 2008 -0500
1615 delta, zylonite: Update nand_oobinfo to nand_ecclayout.
1617 This is part of the switch to newer upstream MTD code.
1619 Signed-off-by: Scott Wood <scottwood@freescale.com>
1621 commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
1622 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1623 Date: Sat Aug 30 17:06:55 2008 -0400
1625 ARM DaVinci: Fix broken HW ECC for large page NAND.
1627 Based on original patch by Bernard Blackham <bernard@largestprime.net>
1629 U-boot's HW ECC support for large page NAND on Davinci is completely
1630 broken. Some kernels, such as the 2.6.10 one supported by
1631 MontaVista for DaVinci, rely upon this broken behaviour as they
1632 share the same code for ECCs. In the existing scheme, error
1633 detection *might* work on large page, but error correction
1634 definitely does not. Small page ECC correction works, but the
1635 format is not compatible with the mainline git kernel.
1637 This patch adds ECC code that matches what is currently in the
1638 Davinci git repository (since NAND support was added in 2.6.24).
1639 This makes the ECC and OOB layout written by u-boot compatible with
1640 Linux for both small page and large page devices and fixes ECC
1641 correction for large page devices.
1643 The old behaviour can be restored by defining the macro
1644 CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
1646 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1647 Acked-by: Sergey Kubushyn <ksi@koi8.net>
1648 Signed-off-by: Scott Wood <scottwood@freescale.com>
1650 commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
1651 Author: Heiko Schocher <hs@denx.de>
1652 Date: Wed Sep 10 11:15:28 2008 +0200
1654 muas3001: update BR4 settings
1656 Also set up the port pins for using I2C.
1658 Signed-off-by: Heiko Schocher <hs@denx.de>
1660 commit 3591293509e0c0bcf244b0f974775bff2e25697e
1661 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
1662 Date: Wed Sep 10 09:43:49 2008 +0300
1664 autoscr: Fix one-character lines and non-newline terminated scripts
1666 When not using hush, the autoscr command now executes lines that are
1667 only one character long. It also runs the last line of scripts even if
1668 it does not end in a newline.
1670 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
1672 commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
1673 Author: Victor Gallardo <vgallardo@amcc.com>
1674 Date: Tue Sep 9 15:13:29 2008 -0700
1676 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
1678 On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
1681 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
1683 commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
1684 Author: Heiko Schocher <hs@denx.de>
1685 Date: Mon Sep 8 10:21:11 2008 +0200
1687 muas3001: added support for the LM75 sensor.
1689 Signed-off-by: Heiko Schocher <hs@denx.de>
1691 commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
1692 Author: Heiko Schocher <hs@denx.de>
1693 Date: Mon Sep 8 10:20:19 2008 +0200
1695 muas3001: activate WDT for the muas3001 board.
1697 Signed-off-by: Heiko Schocher <hs@denx.de>
1699 commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
1700 Author: Heiko Schocher <hs@denx.de>
1701 Date: Mon Sep 8 10:19:36 2008 +0200
1703 muas3001: added 64MB SDRAM autodetection.
1705 Signed-off-by: Heiko Schocher <hs@denx.de>
1707 commit 5251469943895de4bb9a04d5053352cc22acb7d5
1708 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
1709 Date: Thu Aug 21 07:12:26 2008 -0700
1711 Fix printf errors under -DDEBUG
1713 Fix printf format-string/arg mismatches under -DDEBUG.
1715 These warnings occur with DEBUG defined for a platform using
1716 cpu/mpc85xx. Users of other architectures can unearth similar
1717 problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
1718 after "CFLAGS += $(call cc-option,-fno-stack-protector)".
1720 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
1721 Signed-off-by: Andy Fleming <afleming@freescale.com>
1723 commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
1724 Author: Wolfgang Denk <wd@denx.de>
1725 Date: Tue Sep 9 23:55:18 2008 +0200
1727 Update CHANGELOG, prepare 2008-10-rc1 release
1729 Signed-off-by: Wolfgang Denk <wd@denx.de>
1731 commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
1732 Author: Kumar Gala <galak@kernel.crashing.org>
1733 Date: Mon Sep 8 08:51:29 2008 -0500
1735 85xx: Ensure timebase is zero on secondary cores
1737 The e500um says the timebase is volatile out of reset. To ensure
1738 TB sync works we need to make sure its zero.
1740 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1742 commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
1743 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1744 Date: Tue Sep 9 22:18:24 2008 +0200
1746 bootm_load_os: fix load_end debug message
1748 print load_end value not pointer
1750 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1752 commit 1d9af0be764960e6cc1c093e97176c3542796820
1753 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1754 Date: Tue Sep 9 22:18:23 2008 +0200
1756 bootm: enable fdt support only on ppc, m68k and sparc
1758 ...as done in image.c
1760 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1762 commit 748b5274e76f81df85cfcffaffedc323678d0623
1763 Author: Markus Heidelberg <markus.heidelberg@web.de>
1764 Date: Tue Sep 9 18:51:05 2008 +0200
1766 common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
1768 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
1770 commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
1771 Author: Markus Heidelberg <markus.heidelberg@web.de>
1772 Date: Tue Sep 9 17:31:46 2008 +0200
1774 gitignore: add tags files and Vim swap file
1776 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
1778 commit 1d9b67b23fca6a25154333733204339802510720
1779 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
1780 Date: Tue Sep 9 17:52:47 2008 +0900
1782 add board_eth_init() for sh7785lcr board
1784 Fix the problem that cannot work RTL8169 on sh7785lcr board.
1786 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
1788 commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
1789 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1790 Date: Wed Aug 6 16:08:41 2008 -0500
1792 mtd: SPI Flash: Support the STMicro Flash
1794 Add MTD SPI Flash support for M25P16, M25P20, M25P32,
1795 M25P40, M25P64, M25P80, M25P128.
1797 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
1798 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1800 commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
1801 Author: Wolfgang Denk <wd@denx.de>
1802 Date: Tue Sep 9 17:55:31 2008 +0200
1804 trab: fix build problem after change to use do_div()
1806 We must link with libgeneric now.
1808 Signed-off-by: Wolfgang Denk <wd@denx.de>
1810 commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
1811 Author: Ryan CHEN <ryan.chen@st.com>
1812 Date: Wed Aug 20 13:00:17 2008 -0400
1814 Correct drv_usb_kbd_init function
1816 The patch is that check if usb_get_dev_index() function return valid
1817 pointer. If valid, continue. Otherwise return -1.
1819 Signed-off-by: Ryan Chen <ryan.chen@st.com>
1820 Acked-by: Markus Klotzbuecher <mk@denx.de>
1822 commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
1823 Author: Remy Bohmer <linux@bohmer.net>
1824 Date: Wed Aug 20 11:22:02 2008 +0200
1826 Make usb-stop() safe to call multiple times in a row.
1828 A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
1829 enabled the usb_stop() command in common/cmd_bootm.c which was
1830 not enabled for some time, because no board did actually set the
1831 CFG_CMD_USB flag. So, now the usb_stop() is executed before
1832 loading the linux kernel.
1834 However, the usb_ohci driver hangs up (at least on AT91SAM) if the
1835 driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
1836 If some other piece of code calls usb_stop() before the bootm command,
1837 this command will hangup the system during boot.
1838 (usb start and stop is typically used while booting from usb memory stick)
1840 But, stopping the usb stack twice is useless anyway, and a flag already
1841 existed that kept track on the usb_init()/usb_stop() calls.
1842 So, we now check if the usb stack is really started before we stop it.
1844 This problem is now fixed in both the upper as low-level layer.
1846 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1847 Acked-by: Markus Klotzbuecher <mk@denx.de>
1849 commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
1850 Author: Wolfgang Denk <wd@denx.de>
1851 Date: Tue Sep 9 16:55:47 2008 +0200
1853 Makefile: fix bug introduced by commit 47ffd6c2
1855 commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
1856 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1857 Date: Tue Sep 9 10:00:33 2008 -0400
1859 ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
1861 This patch solves the problems compiling ml507, v5fx30teval and
1862 ppc440-generic out of tree.
1864 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1866 commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
1867 Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
1868 Date: Thu Sep 4 15:35:46 2008 -0300
1870 Fix dev_print when called from usb_stor_info (usb storage command)
1872 Fix output of the usb storage command. It was printing "Device 0: not
1873 available" because IF_TYPE_USB was not included into the switch
1876 Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
1878 commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
1879 Author: Bartlomiej Sieka <tur@semihalf.com>
1880 Date: Tue Sep 9 12:58:16 2008 +0200
1882 FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
1884 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1886 commit 919f550dc11a13abf01c6bc713c968de790b8d7c
1887 Author: Bartlomiej Sieka <tur@semihalf.com>
1888 Date: Tue Sep 9 12:58:15 2008 +0200
1890 FIT: add ability to check hashes of all images in FIT, improve output
1892 - add function fit_all_image_check_hashes() that verifies if all
1893 hashes of all images in the FIT are valid
1894 - improve output of fit_image_check_hashes() when the hash check fails
1896 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1898 commit 1de1fa408967cef6804bb046b904114519bb36f0
1899 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1900 Date: Mon Sep 8 20:54:39 2008 +0200
1902 qemu_mips: Update linux bootm to support dynamic cmdline
1904 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1906 commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
1907 Author: Peter Tyser <ptyser@xes-inc.com>
1908 Date: Mon Sep 8 14:56:49 2008 -0500
1910 Add support for booting of INTEGRITY operating system uImages
1912 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1914 commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
1915 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1916 Date: Mon Sep 8 21:01:29 2008 +0200
1918 mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
1920 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1922 commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
1923 Author: Kumar Gala <galak@kernel.crashing.org>
1924 Date: Mon Sep 8 13:57:12 2008 -0500
1926 Remove support for booting ARTOS images
1928 Pantelis Antoniou stated:
1929 AFAIK, it is still used but the products using PPC are long gone.
1930 Nuke it plz (from orbit).
1932 So remove it since it cleans up a usage of env_get_char outside of
1933 the environment code.
1935 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1937 commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
1938 Author: Wolfgang Denk <wd@denx.de>
1939 Date: Tue Sep 9 15:45:18 2008 +0200
1941 Makefile: compile and link each module just once
1943 Several source files need to be compiled and linked when one or more
1944 config options are selected. To allow for easy selection in the
1945 Makefiles yet to avoild multiple compilation (which costs build time)
1946 and especially multiple linking (which causes errors), we use
1947 "COBJS = $(sort COBJS-y)" which eliminates duplicates.
1949 By courtesy of Detlev Zundel who suggested this approach.
1951 Signed-off-by: Wolfgang Denk <wd@denx.de>
1953 commit 48d0192fe869948fef14b460b5f0c85bca933693
1954 Author: Andreas Engel <andreas.engel@ericsson.com>
1955 Date: Mon Sep 8 14:30:53 2008 +0200
1957 Moved conditional compile into Makefile
1959 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
1961 commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
1962 Author: Andreas Engel <andreas.engel@ericsson.com>
1963 Date: Mon Sep 8 10:17:31 2008 +0200
1965 Merged serial_pl010.c and serial_pl011.c.
1967 They only differ in the init function.
1968 This also adds the missing watchdog support for the PL011.
1970 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
1972 commit 0817d688f307ee2c0598e79175c94a40ce90337b
1973 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1974 Date: Sun Sep 7 17:10:27 2008 -0400
1976 Remove gap fill in srec object v2
1978 SREC files do not need gap fill: The load address is specified in the
1979 file. On the other hand, it can't be avoided in a .bin object. It has
1980 no information about memory location.
1982 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1984 commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
1985 Author: Markus Heidelberg <markus.heidelberg@web.de>
1986 Date: Sun Sep 7 20:18:27 2008 +0200
1988 README: fix missing subdirectory in the documentation
1990 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
1992 commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
1993 Author: Graeme Russ <graeme.russ@gmail.com>
1994 Date: Sun Sep 7 07:08:42 2008 +1000
1996 Update i386 code (sc520_cdp)
1998 Attempt to bring i386 / sc520 inline with master
2000 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2002 commit 5608692104efa8d56df803dc79ea41ac3607eee5
2003 Author: Guennadi Liakhovetski <lg@denx.de>
2004 Date: Thu Sep 4 13:01:49 2008 +0200
2006 fw_env: add NAND support
2008 Add support for environment in NAND with automatic NOR / NAND recognition,
2009 including unaligned environment, bad-block skipping, redundant environment
2012 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2014 commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
2015 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2016 Date: Tue Sep 9 09:50:24 2008 +0200
2018 ppc4xx: Fix out-of-tree building of CPCI405 variants
2020 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2021 Acked-by: Stefan Roese <sr@denx.de>
2023 commit 59f630588e3fdbd698a0a2798e52a8924e899563
2024 Author: Sergei Poselenov <sposelenov@emcraft.com>
2025 Date: Fri Aug 15 15:42:11 2008 +0200
2027 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
2029 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2031 commit e64987a892353f3d49eb242d997820ef8f538912
2032 Author: Anatolij Gustschin <agust@denx.de>
2033 Date: Fri Aug 15 15:42:13 2008 +0200
2035 85xx: socrates: Enable Lime support.
2037 This patch adds Lime GDC support together with support for the PWM
2038 backlight control through the w83782d chip. The reset pin of the
2039 latter is attached to GPIO, so we need to reset it in
2042 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2044 commit 3e79b588b5199f35016f178fc0d5d1266382097f
2045 Author: Detlev Zundel <dzu@denx.de>
2046 Date: Fri Aug 15 15:42:12 2008 +0200
2048 85xx: Socrates: Major code update.
2050 - Update the local bus ranges in the FDT for Linux for the various
2051 devices connected to the local bus via chip-select.
2053 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
2054 lower than 66 MHz and uses I/O accessor functions consequently.
2058 - Update of default environment and configuration. Use I2C multibus
2059 as we do have two I2C buses. Also enable sdram and ext2 commands.
2061 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2062 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2063 Signed-off-by: Detlev Zundel <dzu@denx.de>
2065 commit e8d18541c6ceab821f75faab031740b33fdbfa4b
2066 Author: Timur Tabi <timur@freescale.com>
2067 Date: Fri Jul 18 16:52:23 2008 +0200
2069 Update Freescale 85xx boards to sys_eeprom.c
2071 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
2072 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
2073 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
2074 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
2076 Signed-off-by: Timur Tabi <timur@freescale.com>
2078 commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
2079 Author: Wolfgang Denk <wd@denx.de>
2080 Date: Tue Sep 9 10:08:02 2008 +0200
2082 lib_ppc/interrupts.c: make board_show_activity() a weak function
2084 This allows to use show_activity() without having to
2085 define an empty board_show_activity() function.
2087 Signed-off-by: Wolfgang Denk <wd@denx.de>
2089 commit fe876787f8743883ce58fed61525eaa2f34da4c5
2090 Author: Wolfgang Denk <wd@denx.de>
2091 Date: Tue Sep 9 10:06:44 2008 +0200
2093 stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
2095 Signed-off-by: Wolfgang Denk <wd@denx.de>
2097 commit 965de106ba8900372c8b16dc60d5acab7f925e38
2098 Author: Wolfgang Denk <wd@denx.de>
2099 Date: Tue Sep 9 10:03:47 2008 +0200
2101 NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
2103 Signed-off-by: Wolfgang Denk <wd@denx.de>
2105 commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
2106 Author: Sergei Poselenov <sposelenov@emcraft.com>
2107 Date: Fri Aug 15 15:42:11 2008 +0200
2109 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
2111 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2113 commit 36241ca29d4804a1006fb3f26069effda5202581
2114 Author: Anatolij Gustschin <agust@denx.de>
2115 Date: Fri Aug 15 15:42:13 2008 +0200
2117 85xx: socrates: Enable Lime support.
2119 This patch adds Lime GDC support together with support for the PWM
2120 backlight control through the w83782d chip. The reset pin of the
2121 latter is attached to GPIO, so we need to reset it in
2124 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2126 commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
2127 Author: Detlev Zundel <dzu@denx.de>
2128 Date: Fri Aug 15 15:42:12 2008 +0200
2130 85xx: Socrates: Major code update.
2132 - Update the local bus ranges in the FDT for Linux for the various
2133 devices connected to the local bus via chip-select.
2135 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
2136 lower than 66 MHz and uses I/O accessor functions consequently.
2140 - Update of default environment and configuration. Use I2C multibus
2141 as we do have two I2C buses. Also enable sdram and ext2 commands.
2143 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2144 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2145 Signed-off-by: Detlev Zundel <dzu@denx.de>
2147 commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
2148 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2149 Date: Tue Sep 9 01:22:39 2008 +0200
2151 disk-on-chip: remove duplicate doc_probe declaration
2153 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2155 commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
2156 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2157 Date: Tue Sep 9 00:59:40 2008 +0200
2159 onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
2161 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2163 commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
2164 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2165 Date: Tue Sep 9 00:59:39 2008 +0200
2167 rs5c372: fix rtc_set prototype
2169 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2171 commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
2172 Author: Sergei Poselenov <sposelenov@emcraft.com>
2173 Date: Thu Aug 14 14:08:28 2008 +0200
2175 ARM: fix warning: target CPU does not support interworking
2177 This patch fixes warnings like this:
2179 start.S:0: warning: target CPU does not support interworking
2181 which come from some ARM cross compilers and are caused by hard-coded
2182 (with "--with-cpu=arm9" configuration option) ARM targets (which
2183 support ARM Thumb instructions), while the ARM target selected from
2184 the command line (with "-march=armv4") doesn't support Thumb
2187 This warning is issued by the compiler regardless of the real use of
2188 the Thumb instructions in code.
2190 To fix this problem, we use options according to compiler version
2193 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2194 Signed-off-by: Wolfgang Denk <wd@denx.de>
2196 commit 4265c35fbcb248e58179007621d61d32d0b3b82a
2197 Author: Sergei Poselenov <sposelenov@emcraft.com>
2198 Date: Thu Aug 14 14:08:28 2008 +0200
2200 ARM: Use do_div() instead of division for "long long".
2202 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2203 Signed-off-by: Wolfgang Denk <wd@denx.de>
2205 commit 8febd13c69cb68652577d1a9fcbde954bf784155
2206 Author: Timur Tabi <timur@freescale.com>
2207 Date: Fri Jul 18 16:52:23 2008 +0200
2209 Update Freescale 85xx boards to sys_eeprom.c
2211 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
2212 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
2213 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
2214 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
2216 Signed-off-by: Timur Tabi <timur@freescale.com>
2218 commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
2219 Author: Wolfgang Denk <wd@denx.de>
2220 Date: Mon Sep 8 23:26:22 2008 +0200
2222 lib_arm/bootm.c: fix compile warnings
2224 bootm.c:128: warning: label 'error' defined but not used
2225 bootm.c:65: warning: unused variable 'ret'
2227 Signed-off-by: Wolfgang Denk <wd@denx.de>
2229 commit 2e3c867d0a63c563a51e65b776973b008f16cec5
2230 Author: Wolfgang Denk <wd@denx.de>
2231 Date: Mon Sep 8 22:46:42 2008 +0200
2233 ml507: fix out of tree build problem
2235 Signed-off-by: Wolfgang Denk <wd@denx.de>
2237 commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
2238 Author: Wolfgang Denk <wd@denx.de>
2239 Date: Mon Sep 8 22:10:28 2008 +0200
2241 common/cmd_bootm.c: fix printf() format warnings
2243 Signed-off-by: Wolfgang Denk <wd@denx.de>
2245 commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
2246 Author: Wolfgang Denk <wd@denx.de>
2247 Date: Mon Sep 8 22:37:45 2008 +0200
2249 BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
2251 missing doc_probe() prototype.
2253 Signed-off-by: Wolfgang Denk <wd@denx.de>
2255 commit 2c5e3cc4994897d364b148942ff23e47783198f6
2256 Author: Wolfgang Denk <wd@denx.de>
2257 Date: Mon Sep 8 21:28:14 2008 +0200
2259 mk48t59: fix compile problem introduced by commit d1e23194
2261 Signed-off-by: Wolfgang Denk <wd@denx.de>
2263 commit 5ff889349d2ace13f10c9335e09365fcec8247cc
2264 Author: Stefan Roese <sr@denx.de>
2265 Date: Mon Sep 8 14:11:12 2008 +0200
2267 ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
2269 This patch moves some 4xx specific prototypes out of include common.h
2270 to a ppc4xx specific header.
2272 Signed-off-by: Stefan Roese <sr@denx.de>
2274 commit ac53ee8318678190bf3c68da477a84a657d86fb0
2275 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2276 Date: Fri Sep 5 15:34:04 2008 +0200
2278 ppc4xx: Update CPCI405(AB) configuration
2280 This patch add FDT support and command line editing capabilities
2281 for CPCI405 and CPCI405AB boards.
2283 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2284 Signed-off-by: Stefan Roese <sr@denx.de>
2286 commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
2287 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2288 Date: Fri Sep 5 15:34:03 2008 +0200
2290 ppc4xx: Cleanup CPCI405 linker script
2292 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2293 Signed-off-by: Stefan Roese <sr@denx.de>
2295 commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
2296 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2297 Date: Fri Sep 5 15:34:02 2008 +0200
2299 ppc4xx: Update CPCI405 variants handling
2301 This patch replaces the BOARD_REVISION variable in include/config.mk
2302 by a using a temporary include file in the platform directory.
2304 The former way does not work anymore and the latter is also used by
2307 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2308 Signed-off-by: Stefan Roese <sr@denx.de>
2310 commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
2311 Author: Stefan Roese <sr@denx.de>
2312 Date: Mon Sep 8 10:01:48 2008 +0200
2314 ppc4xx: Remove CONFIG_CS8952_PHY define
2316 Since this define is only used on one board that was never really in
2317 production, removing this compile time option doesn't hurt and makes
2318 the code more readable.
2320 Signed-off-by: Stefan Roese <sr@denx.de>
2322 commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
2323 Author: Stefan Roese <sr@denx.de>
2324 Date: Fri Sep 5 14:11:40 2008 +0200
2326 ppc4xx: Fix compilation warning for PIP405
2328 This patch fixes a compilation warning for the PIP405 board. It moves the
2329 #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
2330 occur anymore. I am a little unsure if this #ifdef is at the correct
2331 place now or if it could be removed completely. This needs to get
2332 tested on the PIP405 board.
2334 Signed-off-by: Stefan Roese <sr@denx.de>
2336 commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
2337 Author: Stefan Roese <sr@denx.de>
2338 Date: Fri Sep 5 14:09:09 2008 +0200
2340 ppc4xx: Fix compilation warning for canyonlands & glacier
2342 Signed-off-by: Stefan Roese <sr@denx.de>
2344 commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
2345 Author: Kumar Gala <galak@kernel.crashing.org>
2346 Date: Fri Sep 5 14:40:29 2008 -0500
2348 Fix compiler warning in mpc8xxx ddr code
2350 ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
2351 ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
2352 ctrl_regs.c:523: note: 'caslat' was declared here
2354 Add a warning in DDR1 case if cas_latency isn't a value we know about.
2356 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2357 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2359 commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
2360 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2361 Date: Mon Sep 1 23:06:23 2008 +0200
2363 rtc: allow rtc_set to return an error and use it in cmd_date
2365 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2367 commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
2368 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2369 Date: Mon Sep 1 01:16:33 2008 +0200
2371 ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
2373 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2375 commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
2376 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2377 Date: Sun Aug 31 05:37:04 2008 +0900
2379 config.mk: Move arch-specific condition to $(ARCH)_config.mk
2381 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2383 commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
2384 Author: Kumar Gala <galak@kernel.crashing.org>
2385 Date: Fri Aug 29 19:08:29 2008 -0500
2387 Prevent crash if random/invalid ramdisks are passed to bootm
2389 Adds returning an error from the ramdisk detection code if
2390 its not a real ramdisk (invalid). There is no reason we can't
2391 just return back to the console if we detect an invalid
2392 ramdisk or CRC error.
2394 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2396 commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
2397 Author: Anatolij Gustschin <agust@denx.de>
2398 Date: Fri Aug 29 21:04:45 2008 +0200
2400 Prevent crash if random DTB address is passed to bootm
2402 This patch adds bootm_start() return value check. If
2403 error status is returned, we do not proceed further to
2404 prevent board reset or crash as we still can recover
2407 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2409 commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
2410 Author: Andrew Dyer <adyer@righthandtech.com>
2411 Date: Fri Aug 29 12:30:39 2008 -0500
2413 clean up some #if !defined() in drivers/video/cfb_console.c
2415 rearrange some #if !defined() / #else / #endif statements to remove
2418 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
2420 commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
2421 Author: Kyungmin Park <kmpark@infradead.org>
2422 Date: Fri Aug 29 09:02:20 2008 +0900
2424 apollon: use the last memory area for u-boot
2426 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2428 commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
2429 Author: Heiko Schocher <hs@denx.de>
2430 Date: Thu Aug 28 13:50:42 2008 +0200
2432 TQM8272: move NAND part in seperate File
2434 I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
2435 because I have no longer access to the hardware.
2437 Signed-off-by: Heiko Schocher <hs@denx.de>
2439 commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
2440 Author: Heiko Schocher <hs@denx.de>
2441 Date: Thu Aug 28 13:48:36 2008 +0200
2443 TQM8272: Fix compiling error for the TQM8272 board.
2445 Fix compile problems caused by
2446 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
2448 Signed-off-by: Heiko Schocher <hs@denx.de>
2450 commit 1a7f8ccec981648ccd38fca2535490582eee08e6
2451 Author: Kyungmin Park <kmpark@infradead.org>
2452 Date: Wed Aug 27 14:45:20 2008 +0900
2454 Add JFFS2 command support on OneNAND
2456 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2458 commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
2459 Author: Mark Jackson <mpfj@mimc.co.uk>
2460 Date: Mon Aug 25 19:21:30 2008 +0100
2462 Allow console input to be disabled
2464 Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
2466 When CONFIG_DISABLE_CONSOLE is defined, setting
2467 GD_FLG_DISABLE_CONSOLE disables all console input and output.
2469 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
2471 commit 2b22d608f370565c87f55928b524207031419c11
2472 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2473 Date: Wed Jul 30 12:39:29 2008 +0200
2475 loads: allow negative offsets
2477 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2479 commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
2480 Author: Yuri Tikhonov <yur@emcraft.com>
2481 Date: Thu Sep 4 11:19:05 2008 +0200
2483 USB EHCI: reset root hub
2485 Some of multi-function USB controllers (e.g. ISP1562) allow root hub
2486 resetting only via EHCI registers. So, this patch adds the
2487 corresponding kind of reset to OHCI's hc_reset() if the newly
2488 introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
2491 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2492 Acked-by: Markus Klotzbuecher <mk@denx.de>
2494 commit 5875d358f025c1b042d8a0f08384b756de7256c9
2495 Author: Yuri Tikhonov <yur@emcraft.com>
2496 Date: Fri Aug 15 15:42:09 2008 +0200
2498 RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
2500 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2502 commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
2503 Author: Stefan Roese <sr@denx.de>
2504 Date: Fri Sep 5 10:47:46 2008 +0200
2506 devices: Use list_add_tail() instead of list_add() to register a device
2508 This patch fixes a problem spotted on Glacier/Canyonlands (and most
2509 likely lots of other board ports), that no serial output was seen
2510 after console initialization in console_init_r(). This is because the
2511 last added console device was used instead of the first added.
2513 This patch fixes this problem by using list_add_tail() instead of
2514 list_add() to register a device. This way the first added console
2517 Signed-off-by: Stefan Roese <sr@denx.de>
2519 commit 78d78236896d62bb8ca7302af38d8f1493eb2651
2520 Author: Victor Gallardo <vgallardo@amcc.com>
2521 Date: Thu Sep 4 23:49:36 2008 -0700
2523 ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
2525 This patch adds GPCS, SGMII and M88E1112 PHY support
2526 for the AMCC PPC460GT/EX processors.
2528 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
2529 Signed-off-by: Stefan Roese <sr@denx.de>
2531 commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
2532 Author: Adam Graham <agraham@amcc.com>
2533 Date: Wed Sep 3 12:26:59 2008 -0700
2535 ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
2537 Signed-off-by: Adam Graham <agraham@amcc.com>
2538 Signed-off-by: Stefan Roese <sr@denx.de>
2540 commit 075d0b81e896e8735ae26372cd384f87cbd24e41
2541 Author: Adam Graham <agraham@amcc.com>
2542 Date: Wed Sep 3 12:26:28 2008 -0700
2544 ppc4xx: IBM Memory Controller DDR autocalibration routines
2546 Alternate SDRAM DDR autocalibration routine that can be generically used
2547 for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
2548 support of more DIMM/memory chip vendors and gets the DDR autocalibration
2549 values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
2551 Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
2552 "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
2553 of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
2554 lot longer to run than Method_B. Method_B executes in the same amount of time
2555 as the currently existing DDR autocalibration routine, i.e. 1 second or so.
2556 Normally Method_B is used and it is set as the default method.
2558 The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
2559 Controller registers.[bit-field]:
2560 1) SDRAM0_RQDC.[RQFD]
2561 2) SDRAM0_RFDC.[RFFD]
2563 This alternate PPC4xx DDR autocalibration code calibrates the following
2564 IBM SDRAM Controller registers.[bit-field]:
2566 1) SDRAM0_WRDTR.[WDTR]
2567 2) SDRAM0_CLKTR.[CKTR]
2568 3) SDRAM0_RQDC.[RQFD]
2569 4) SDRAM0_RFDC.[RFFD]
2571 and will also use the calibrated settings of the above four registers that
2572 produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
2573 register.[bit-field].
2575 Signed-off-by: Adam Graham <agraham@amcc.com>
2576 Signed-off-by: Stefan Roese <sr@denx.de>
2578 commit e07f4a8033b6270b8103049adb6456f660ff4a89
2579 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2580 Date: Mon Sep 1 13:09:39 2008 -0400
2582 ppc44x: Unification of virtex5 pp440 boards
2584 This patch provides an unificated way of handling xilinx v5 ppc440 boards.
2586 It unificates 3 different things:
2589 A new board called ppc440-generic has been created. This board includes
2590 a generic tlb initialization (Maps the whole memory into virtual) and
2591 defines board_pre_init, checkboard, initdram and get_sys_info weakly,
2592 so, they can be replaced by specific functions.
2594 If a new board needs to redefine any of the previous functions
2595 (specific initialization) it can create a new directory with the
2596 specific initializations needed. (see the example ml507 board).
2598 2) Configuration file
2599 Common configurations are located under configs/xilinx-ppc440.h, this
2600 header file interpretes the xparameters file generated by EDK and
2601 configurates u-boot in correspondence. Example: if there is a Temac,
2602 allows CMD_CONFIG_NET
2603 Specific configuration are located under specific configuration file.
2604 (see the example ml507 board)
2607 Some work has been done in order to not duplicate work in the Main
2608 Makefile. Please see the attached code.
2610 In order to support new boards they can be implemented in the next way:
2612 a) Simple Generic Board (90% of the time)
2613 Using EDK generates a new xparameters.h file, replace
2614 ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
2617 b) Simple Boards with special u-boot parameters (9 % of the time)
2618 Create a new file under configs for it (use ml507.h as example) and
2619 change your paramaters. Create a new Makefile paragraph and compile
2621 c) Complex boards (1% of the time)
2622 Create a new folder for the board, like the ml507
2624 Finally, it adds support for the Avnet FX30T Evaluation board, following
2625 the new generic structure:
2627 Cheap board by Avnet for evaluating the Virtex5 FX technology.
2629 This patch adds support for:
2634 Prior using U-boot in this board, read carefully the ERRATA by Avnet
2635 to solve some memory initialization issues.
2637 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2638 Signed-off-by: Stefan Roese <sr@denx.de>
2640 commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
2641 Author: Nick Spence <nick.spence@freescale.com>
2642 Date: Tue Sep 2 15:21:16 2008 -0500
2644 mpc83xx: fix mpc8313 in-tree building with NAND
2646 and add mpc8313 NAND build to MAKEALL
2648 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2649 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2651 commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
2652 Author: Nick Spence <nick.spence@freescale.com>
2653 Date: Thu Aug 28 14:09:25 2008 -0700
2655 mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
2657 Cleans up some latent issues with the data cache control so that
2658 dcache_enable() and dcache_disable() will work reliably (after
2659 unlock_ram_in_cache() has been called)
2661 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2662 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2664 commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
2665 Author: Nick Spence <nick.spence@freescale.com>
2666 Date: Thu Aug 28 14:09:19 2008 -0700
2668 mpc83xx: Store and display Arbiter Event Register values
2670 Record the Arbiter Event Register values and optionally display them.
2672 The Arbiter Event Register can record the type and effective address of
2673 an arbiter error, even through an HRESET. This patch stores the values in
2674 the global data structure.
2676 Display of the Arbiter Event registers immediately after the RSR value
2677 can be enabled with defines. The Arbiter values will only be displayed
2678 if an arbiter event has occured since the last Power On Reset, and either
2679 of the following defines exist:
2680 #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
2681 and type register values
2682 #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
2683 event register values
2685 Address Only transactions are one of the trapped events that can register
2686 as an arbiter event. They occur with some cache manipulation instructions
2687 if the HID0_ABE (Address Broadcast Enable) is set and the memory region
2688 has the MEMORY_COHERENCE WIMG bit set. Setting:
2689 #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
2690 only events, so that it can still capture
2691 other real problems.
2693 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2694 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2696 commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
2697 Author: Nick Spence <nick.spence@freescale.com>
2698 Date: Thu Aug 28 14:09:11 2008 -0700
2700 mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
2702 This is needed in unlock_ram_in_cache() because it is called from C and
2703 will corrupt the small data area anchor that is kept in R2.
2705 lock_ram_in_cache() is modified similarly as good coding practice, but
2706 is not called from C.
2708 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2709 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2711 commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
2712 Author: Nick Spence <nick.spence@freescale.com>
2713 Date: Fri Aug 22 23:52:50 2008 -0700
2715 MPC83XX: Fix GPIO configuration - set gpio level before direction
2717 Set DAT value before DIR values to avoid creating glitches on the
2720 Set gpio level register before direction register to inhibit
2721 glitches on high level output pins.
2723 Dir and data gets cleared at powerup, so high level output lines see
2724 a short low pulse between setting the direction and level registers.
2726 Issue was seen on a new board with the nReset line of the NOR flash
2727 connected to a GPIO. Setting the direction register puts the NOR flash
2728 in reset so the next instruction to set the level cannot get executed.
2730 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2731 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2732 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2734 commit 7007c5975ee900ad70983b0681d3251e221f8321
2735 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2736 Date: Tue Sep 2 02:58:32 2008 +0200
2738 doc/qemu_mips: add doc howto debug u-boot with gdb
2740 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2742 commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
2743 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2744 Date: Wed Sep 3 17:15:45 2008 +0200
2746 ppx4xx: Fix broken DASA_SIM board
2748 This patch adds initdram() to DASA_SIM boards that has been
2749 removed accidentally by a previous commit.
2751 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2752 Signed-off-by: Stefan Roese <sr@denx.de>
2754 commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
2755 Author: Stefan Roese <sr@denx.de>
2756 Date: Mon Sep 1 08:35:37 2008 +0200
2758 ppc4xx: Remove reference to common/lists.o from some esd linker scripts
2760 This patch removes some direct references to common/lists.o from some
2761 esd linker scripts. This is necessary because the lists source was moved
2762 and is not in the "common" directory anymore.
2764 Signed-off-by: Stefan Roese <sr@denx.de>
2766 commit 97b0734d65f8a0b03df0a335a2addc759da56107
2767 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2768 Date: Tue Sep 2 16:33:05 2008 +0200
2770 ppc4xx: Remove obsolete or unused functions from some esd boards
2772 This patch removes initdram() and testdram() from most esd 405 platforms.
2773 Some boards also have an empty dummy implementation of
2774 misc_init_f(). This is also removed.
2776 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2777 Signed-off-by: Stefan Roese <sr@denx.de>
2779 commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
2780 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2781 Date: Tue Sep 2 15:07:54 2008 +0200
2783 ppc4xx: Update VOM405 board configuration
2786 - add command line editing
2789 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2790 Signed-off-by: Stefan Roese <sr@denx.de>
2792 commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
2793 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2794 Date: Tue Sep 2 15:07:53 2008 +0200
2796 ppc4xx: Remove obsolete initdram() function from VOM405 board
2798 This patch removed the obsolete initdram() function from
2799 VOM405 platform file.
2803 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2804 Signed-off-by: Stefan Roese <sr@denx.de>
2806 commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
2807 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2808 Date: Tue Sep 2 15:07:52 2008 +0200
2810 ppc4xx: Cleanup VOM405 linker script
2812 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2813 Signed-off-by: Stefan Roese <sr@denx.de>
2815 commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
2816 Author: Matthias Fuchs <mf@esd.eu>
2817 Date: Tue Sep 2 15:07:51 2008 +0200
2819 ppc4xx: Add fdt support for VOM405 boards
2821 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2822 Signed-off-by: Stefan Roese <sr@denx.de>
2824 commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
2825 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2826 Date: Tue Sep 2 11:36:14 2008 +0200
2828 ppc4xx: Coding style cleanup
2830 Wrap long lines etc.
2832 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2833 Signed-off-by: Stefan Roese <sr@denx.de>
2835 commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
2836 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2837 Date: Tue Sep 2 11:35:56 2008 +0200
2839 ppc4xx: Enable USB on PLU405 boards
2841 This patch enables the PCI-OHCI controller on PLU405 board.
2843 Also the default CPU frequency is updated to 266 MHz and
2844 command line editing is enabled.
2846 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2847 Signed-off-by: Stefan Roese <sr@denx.de>
2849 commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
2850 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2851 Date: Tue Sep 2 11:35:35 2008 +0200
2853 ppc4xx: Cleanup PLU405 platform file
2856 - wraps some long lines
2857 - removes unused/obsolete functions: misc_init_f() and initdram()
2859 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2860 Signed-off-by: Stefan Roese <sr@denx.de>
2862 commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
2863 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2864 Date: Tue Sep 2 11:35:04 2008 +0200
2866 ppc4xx: Cleanup PLU405 linker script
2868 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2869 Signed-off-by: Stefan Roese <sr@denx.de>
2871 commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
2872 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2873 Date: Tue Sep 2 11:34:36 2008 +0200
2875 ppc4xx: Add fdt support for PLU405 boards
2877 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2878 Signed-off-by: Stefan Roese <sr@denx.de>
2880 commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
2881 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2882 Date: Tue Sep 2 11:34:08 2008 +0200
2884 ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
2886 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2887 Signed-off-by: Stefan Roese <sr@denx.de>
2889 commit be1b0d2777e179191a57b138b660547a17e55aad
2890 Author: Jochen Friedrich <jochen@scram.de>
2891 Date: Tue Sep 2 11:24:59 2008 +0200
2893 Don't tftp to unknown flash
2895 If a board has a variable number of flash banks, there are empty entries
2896 in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
2897 "Outside available Flash". This patch skips flash banks with unknown
2900 Signed-off-by: Jochen Friedrich <jochen@scram.de>
2901 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2903 commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
2904 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2905 Date: Thu Aug 28 13:40:44 2008 +0900
2907 net: smc911x: Add pkt_data_pull and pkt_data_push function
2909 The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
2910 Byte-swapping is necessary, and so poor performance is inevitable.
2911 This problem cannot evade by the swap function of CHIP, this can
2912 evade by software Byte-swapping.
2913 And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
2914 functions necessary to solve this problem.
2916 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2917 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2919 commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
2920 Author: Ben Warren <biggerbadderben@gmail.com>
2921 Date: Sun Aug 31 20:37:00 2008 -0700
2923 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
2954 Removed initialization of the driver from net/eth.c
2955 Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
2957 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2959 commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
2960 Author: Ben Warren <biggerbadderben@gmail.com>
2961 Date: Sun Aug 31 10:45:44 2008 -0700
2963 Moved initialization of TULIP Ethernet controller to board_eth_init()
2978 Removed initialization of the driver from net/eth.c
2980 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2982 commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
2983 Author: Ben Warren <biggerbadderben@gmail.com>
2984 Date: Sun Aug 31 10:44:19 2008 -0700
2986 Moved initialization of E1000 Ethernet controller to board_eth_init()
2993 Removed initialization of the driver from net/eth.c
2995 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2997 commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
2998 Author: Ben Warren <biggerbadderben@gmail.com>
2999 Date: Sun Aug 31 10:40:51 2008 -0700
3001 Moved initialization of plb2800 Ethernet driver to board_eth_init
3006 Removed initialization of controller from net/eth.c
3008 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3010 commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
3011 Author: Ben Warren <biggerbadderben@gmail.com>
3012 Date: Sun Aug 31 10:39:12 2008 -0700
3014 Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
3016 Modified board_eth_init() functions of boards that have this FEC in addition
3017 to other Ethernet controllers.
3028 Removed initialization of controller from net/eth.c
3030 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3032 commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
3033 Author: Ben Warren <biggerbadderben@gmail.com>
3034 Date: Sun Aug 31 10:36:38 2008 -0700
3036 Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
3038 Added a cpu_eth_init() function to MPC512x CPU directory and
3039 removed code from net/eth.c
3041 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3043 commit 8218bd2aa68820b878a8413493ae17fd8d21f944
3044 Author: Ben Warren <biggerbadderben@gmail.com>
3045 Date: Sun Aug 31 10:16:59 2008 -0700
3047 Moved initialization of IncaIP Ethernet controller to board_eth_init
3052 Removed initialization of the driver from net/eth.c
3054 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3056 commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
3057 Author: Ben Warren <biggerbadderben@gmail.com>
3058 Date: Sun Aug 31 10:15:26 2008 -0700
3060 Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
3065 Removed initialization of the driver from net/eth.c
3067 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3069 commit 6aca145e067efe75398e9fac97822bd3700de0b2
3070 Author: Ben Warren <biggerbadderben@gmail.com>
3071 Date: Sun Aug 31 10:13:34 2008 -0700
3073 Moved initialization of GT6426x Ethernet controller to board_eth_init()
3080 Removed initialization of the driver from net/eth.c
3082 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3084 commit e3090534d62045dcb73f5392bacc64a4e8e443dc
3085 Author: Ben Warren <biggerbadderben@gmail.com>
3086 Date: Sun Aug 31 10:08:43 2008 -0700
3088 Moved initialization of PCNET Ethernet controller to board_eth_init()
3094 Removed initialization of the driver from net/eth.c
3096 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3098 commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
3099 Author: Ben Warren <biggerbadderben@gmail.com>
3100 Date: Sun Aug 31 10:07:16 2008 -0700
3102 Moved initialization of NATSEMI Ethernet controller to board_eth_init()
3107 Removed initialization of the driver from net/eth.c
3109 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3111 commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
3112 Author: Ben Warren <biggerbadderben@gmail.com>
3113 Date: Sun Aug 31 10:03:22 2008 -0700
3115 Moved initialization of NS8382X Ethernet controller to board_eth_init()
3129 Removed initialization of the driver from net/eth.c
3131 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3133 commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
3134 Author: Ben Warren <biggerbadderben@gmail.com>
3135 Date: Sun Aug 31 09:59:33 2008 -0700
3137 Moved initialization of TSI108 Ethernet controller to board_eth_init()
3142 Removed initialization of the driver from net/eth.c
3144 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3146 commit 0b252f50ae218ae15bfb63af44227972686ebc56
3147 Author: Ben Warren <biggerbadderben@gmail.com>
3148 Date: Sun Aug 31 21:41:08 2008 -0700
3150 Moved initialization of RTL8139 Ethernet controller to board_eth_init()
3159 Removed initialization of the driver from net/eth.c
3161 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3163 commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
3164 Author: Ben Warren <biggerbadderben@gmail.com>
3165 Date: Sun Aug 31 09:49:42 2008 -0700
3167 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
3173 Removed initialization of the driver from net/eth.c
3175 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3177 commit 3ae071e44256144d6c1e3febb65f6c56bd433769
3178 Author: Ben Warren <biggerbadderben@gmail.com>
3179 Date: Tue Aug 12 22:11:53 2008 -0700
3181 Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
3183 Removed at91sam9_eth_initialize() from net/eth.c
3185 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3187 commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
3188 Author: Ben Warren <biggerbadderben@gmail.com>
3189 Date: Sun Aug 31 22:22:04 2008 -0700
3191 Introduce netdev.h header file and remove externs
3193 This addresses all drivers whose initializers have already
3194 been moved to board_eth_init()/cpu_eth_init().
3196 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3198 commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
3199 Author: Andy Fleming <afleming@freescale.com>
3200 Date: Sun Aug 31 16:33:30 2008 -0500
3202 Add pixis_set_sgmii command
3204 The 8544DS and 8572DS platforms support an optional SGMII riser card to
3205 expose ethernet over an SGMII interface. Once the card is in, it is also
3206 necessary to configure the board such that it uses the card, rather than
3207 the on-board ethernet ports. This can either be done by flipping dip switches
3208 on the motherboard, or by modifying registers in the pixis. Either way
3211 This adds a command to allow users to choose which ports are routed through
3212 the SGMII card, and which through the onboard ports. It also allows users
3213 to revert to the current switch settings.
3215 This code does not work on the 8572, as the PIXIS is different.
3217 Signed-off-by: Andy Fleming <afleming@freescale.com>
3218 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3220 commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
3221 Author: Andy Fleming <afleming@freescale.com>
3222 Date: Sun Aug 31 16:33:29 2008 -0500
3224 Add SGMII support for the 8544 DS
3226 The 8544 DS has an optional SGMII Riser card, which uses different PHY
3227 addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
3230 Signed-off-by: Andy Fleming <afleming@freescale.com>
3231 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3233 commit 652f7c2eef76a1340928bd660845441e932d86a2
3234 Author: Andy Fleming <afleming@freescale.com>
3235 Date: Sun Aug 31 16:33:28 2008 -0500
3237 Add support for Freescale SGMII Riser Card
3239 The 8544DS and 8572DS systems have an optional SGMII riser card which
3240 exposes new ethernet ports which are connected to the eTSECs via an
3241 SGMII interface. The SGMII PHYs for this board are offset from the standard
3242 PHY addresses, so this code modifies the passed in tsec_info structure to
3243 use the SGMII PHYs on the card, instead.
3245 Signed-off-by: Andy Fleming <afleming@freescale.com>
3246 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3248 commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
3249 Author: Andy Fleming <afleming@freescale.com>
3250 Date: Sun Aug 31 16:33:27 2008 -0500
3252 Add SGMII support to the tsec
3254 Adds support for configuring the TBI to talk properly with the SerDes.
3256 Signed-off-by: Andy Fleming <afleming@freescale.com>
3257 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3259 commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
3260 Author: Andy Fleming <afleming@freescale.com>
3261 Date: Sun Aug 31 16:33:26 2008 -0500
3263 Pass in tsec_info struct through tsec_initialize
3265 The tsec driver contains a hard-coded array of configuration information
3266 for the tsec ethernet controllers. We create a default function that works
3267 for most tsecs, and allow that to be overridden by board code. It creates
3268 an array of tsec_info structures, which are then parsed by the corresponding
3269 driver instance to determine configuration. Also, add regs, miiregs, and
3270 devname fields to the tsec_info structure, so that we don't need the kludgy
3273 Signed-off-by: Andy Fleming <afleming@freescale.com>
3274 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3276 commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
3277 Author: Andy Fleming <afleming@freescale.com>
3278 Date: Sun Aug 31 16:33:25 2008 -0500
3280 tsec: Move tsec.h to include/
3282 This is to prepare the way for board code passing in the tsec_info structure
3284 Signed-off-by: Andy Fleming <afleming@freescale.com>
3285 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3287 commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
3288 Author: Sergei Poselenov <sposelenov@emcraft.com>
3289 Date: Fri Jun 6 15:52:44 2008 +0200
3291 PHY: Add support for the M88E1121R Marvell chip.
3293 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3294 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
3295 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3297 commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
3298 Author: Wolfgang Denk <wd@denx.de>
3299 Date: Tue Sep 2 21:17:36 2008 +0200
3301 fw_env.c: fix build problems with MTD_VERSION=old
3303 (as needed to support old 2.4 Linux kernel based releases)
3305 Signed-off-by: Wolfgang Denk <wd@denx.de>
3307 commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
3308 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3309 Date: Mon Sep 1 17:11:26 2008 +0200
3311 device: make device_register() clone the device
3313 This is expected by the callers, but this fact was hidden well within
3314 the old list implementation.
3316 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3318 commit c75e772a2f061a508bba28ded1b5bea91f0442b0
3319 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3320 Date: Sun Aug 31 23:28:15 2008 +0900
3322 sh: Remove CC line from board's Makefile
3324 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3326 commit 468eae0660de6fdfd9999944c536ecc4797bd944
3327 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3328 Date: Sun Aug 31 23:25:57 2008 +0900
3330 sh: Replaced "@./mkconfig" for @$(MKCONFIG)
3332 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3334 commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
3335 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3336 Date: Thu Aug 28 14:50:52 2008 +0900
3338 sh: Add support sh2 to MAKEALL
3340 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3341 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3343 commit 6f3d8bb5faa12dbf3031382286784c978df038ee
3344 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3345 Date: Thu Aug 28 14:52:23 2008 +0900
3347 sh: Fix compile error rsk7203 board
3349 This boards used old type preprocessor.
3350 This patch fix compile error.
3352 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3353 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3355 commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
3356 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3357 Date: Thu Aug 28 14:53:31 2008 +0900
3359 sh: Fix compile error sh7785lcr board
3361 This boards used old type preprocessor.
3362 This patch fix compile error.
3364 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3365 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3367 commit 6f0da4972e48f99d37bc522814940a6022cd3084
3368 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3369 Date: Fri Aug 22 17:39:09 2008 +0900
3371 sh: Renesas Solutions AP325RXA board support
3373 AP325RXA is SH7723's reference board.
3374 This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
3375 In this patch, support SCIF, NOR Flash, and Ethernet.
3377 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3378 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3380 commit ab09f433b50bb83b5e440c335bc3839ee069e534
3381 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3382 Date: Fri Aug 22 17:48:51 2008 +0900
3384 sh: add support Renesas SH7723
3386 Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
3387 This patch supports CPU register's header file and SCIF serial driver.
3389 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3390 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3392 commit c655fad06ba3fb042dbc667724a40e1a9a091248
3393 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3394 Date: Sun Aug 31 23:02:04 2008 +0900
3396 sh: Renesas RSK+ 7203 board support
3398 This adds initial support for the RTE RSK+ SH7203 board.
3400 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3401 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3403 commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
3404 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3405 Date: Thu Jul 3 23:11:02 2008 +0900
3407 sh: Add support Renesas SH7203 processor
3409 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3410 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3412 commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
3413 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3414 Date: Sun Aug 31 22:48:33 2008 +0900
3416 sh: Add support SH2/SH2A which is CPU of Renesas Technology
3418 Add support SH2/SH2A basic function.
3420 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3421 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3423 commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
3424 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3425 Date: Sun Aug 31 22:45:08 2008 +0900
3427 sh: Renesas R0P7785LC0011RL board support
3429 This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
3430 Graphic, Ethernet, USB, SD, RTC, and I2C controller.
3432 This patch supports the following functions:
3433 - 128MB DDR2-SDRAM (29-bit address mode only)
3438 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3439 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3441 commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
3442 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3443 Date: Thu Jul 10 19:32:53 2008 +0900
3445 sh: add support for SH7785
3447 Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
3448 This patch supports CPU register's header file.
3450 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3451 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3453 commit d6e04258be8f2408845468d3cf722a4cf0433445
3454 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3455 Date: Sun Aug 31 04:45:42 2008 +0200
3457 davinci: fix remaining dm644x_eth
3459 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3461 commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
3462 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3463 Date: Sun Aug 31 04:24:56 2008 +0200
3465 fs: Move conditional compilation to Makefile
3467 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3469 commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
3470 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3471 Date: Sun Aug 31 04:24:55 2008 +0200
3473 devices: merge to list_head
3475 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3477 commit ef0255fc75f28655f9681422079287d68a14dbaa
3478 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3479 Date: Sun Aug 31 04:24:51 2008 +0200
3483 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3485 commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
3486 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3487 Date: Sun Aug 31 00:39:48 2008 +0200
3489 smdk6400: add gitignore
3491 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3493 commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
3494 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3495 Date: Sun Aug 31 00:39:48 2008 +0200
3497 smdk6400: Use CONFIG_FLASH_CFI_DRIVER
3499 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3501 commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
3502 Author: Guennadi Liakhovetski <lg@denx.de>
3503 Date: Sun Aug 31 00:39:47 2008 +0200
3505 smdk6400: remove redundant bootargs definition
3507 Double bootargs setting leads to a duplicated environmant entry.
3509 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3511 commit 11edcfe260f20dcea79284a3e95270989d433854
3512 Author: Guennadi Liakhovetski <lg@denx.de>
3513 Date: Sun Aug 31 00:39:47 2008 +0200
3515 ARM: Add support for S3C6400 based SMDK6400 board
3517 SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
3518 driver for it too. The board can also boot from the NOR flash, but due to
3519 hardware limitations it can only address 64KiB on it, which is not enough
3520 for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
3522 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3524 commit e0056b341069796eaea11eae0fc8eb93a3dceaac
3525 Author: Guennadi Liakhovetski <lg@denx.de>
3526 Date: Sun Aug 31 00:39:47 2008 +0200
3528 NAND: add NAND driver for S3C64XX
3530 Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
3532 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3534 commit 3fe7b589f9c7463df39056f8872006a67f56a91c
3535 Author: Guennadi Liakhovetski <lg@denx.de>
3536 Date: Sun Aug 31 00:39:47 2008 +0200
3538 S3C64XX: remove broken HWFLOW support from the serial driver
3540 As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
3541 broken and currently unused. Remove it.
3543 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3545 commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
3546 Author: Guennadi Liakhovetski <lg@denx.de>
3547 Date: Sun Aug 31 00:39:47 2008 +0200
3549 serial: add S3C64XX serial driver
3551 Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
3553 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3555 commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
3556 Author: Guennadi Liakhovetski <lg@denx.de>
3557 Date: Sun Aug 31 00:39:46 2008 +0200
3559 USB: Add support for OHCI controller on S3C6400
3561 Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
3562 try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
3563 it should work too and we could still profit from instruction cache.
3565 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3567 commit 9b07773f8883665b002500c190507e9fd99b7181
3568 Author: Guennadi Liakhovetski <lg@denx.de>
3569 Date: Sun Aug 31 00:39:46 2008 +0200
3571 ARM: Add arm1176 core with S3C6400 SoC
3573 Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
3575 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3577 commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
3578 Author: Sandeep Paulraj <s-paulraj@ti.com>
3579 Date: Sun Aug 31 00:39:46 2008 +0200
3581 ARM DaVinci: Changing function names for EMAC driver
3583 DM644x is just one of a series of DaVinci chips that use the EMAC driver.
3584 By replacing all the function names that start with dm644x_* to davinci_*
3585 we make these function more portable. I have tested this change on my EVM.
3586 DM6467 is another DaVinci SOC which uses the EMAC driver and i will
3587 be sending patches that add DaVinci DM6467 support to the list soon.
3589 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
3591 commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
3592 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
3593 Date: Sat Aug 30 23:21:30 2008 +0200
3595 Integrator[AP/CP] - Remove unused file memsetup.S
3597 - memsetup.s is changed/merged to lowlevel_init.S
3598 memsetup.S has a global label memsetup that just returns back to caller
3599 - memsetup global label is changed/merged to lowlevel_init
3600 This label is not called from anywhere.
3602 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
3604 commit 89d51d022a63be1a851eda983c8cbce1a044f65f
3605 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3606 Date: Wed Aug 27 21:35:52 2008 +0200
3608 ARM DaVinci: Standardize names of directories/files
3610 ARM DaVinci: Standardize names of directories/files.
3612 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3613 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3615 commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
3616 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3617 Date: Fri Jul 11 15:10:13 2008 -0400
3619 ARM DaVinci: Move common functions to board/davinci/common
3621 ARM DaVinci: Move common functions to board/davinci/common.
3623 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3625 commit c2b4b2e4814f4ace9015fdb64132894327400bf0
3626 Author: Stefan Roese <sr@denx.de>
3627 Date: Fri Aug 29 11:56:49 2008 +0200
3629 ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
3631 This function is needed for the new NAND infrastructure. We only need
3632 a dummy implementation though for the NDFC.
3634 Signed-off-by: Stefan Roese <sr@denx.de>
3636 commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
3637 Author: Stefan Roese <sr@denx.de>
3638 Date: Fri Aug 29 12:06:27 2008 +0200
3640 ppc4xx: Increase image size for NAND boot target
3642 This is needed since now with HUSH enabled (amcc-common.h) the image
3643 read from NAND exceeds the previous limit.
3645 Signed-off-by: Stefan Roese <sr@denx.de>
3647 commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
3648 Author: Ben Warren <biggerbadderben@gmail.com>
3649 Date: Thu Aug 28 23:58:30 2008 -0700
3651 Move MPC512x_FEC driver to drivers/net
3653 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3655 commit 80b00af01b3c9154774de2936f05a051e92f6a03
3656 Author: Ben Warren <biggerbadderben@gmail.com>
3657 Date: Thu Aug 28 23:58:29 2008 -0700
3659 Move MPC5xxx_FEC driver to drivers/net
3661 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3663 commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
3664 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3665 Date: Fri Aug 29 21:53:57 2008 +0200
3667 cmd_terminal: remove no need ifdef
3669 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3671 commit 578118bdf122877ae769776be002255be447b4fa
3672 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3673 Date: Fri Aug 29 21:53:57 2008 +0200
3675 common/Makefile: order by functionality
3677 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3679 commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
3680 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3681 Date: Fri Aug 29 21:53:56 2008 +0200
3683 miiphyutil: Move conditional compilation to Makefile
3685 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3687 commit 81789c39db3f0f6b621df8c0ec66014d701f368e
3688 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3689 Date: Fri Aug 29 21:53:37 2008 +0200
3691 autoscript: Move conditional compilation to Makefile
3693 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3695 commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
3696 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3697 Date: Fri Aug 29 01:18:11 2008 +0200
3699 crc16: move to lib_generic
3701 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3703 commit 55195773eacefb22dd483a3c560ea30a14263ce1
3704 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3705 Date: Fri Aug 29 01:18:01 2008 +0200
3707 miiphybb: move to drivers/net/phy
3709 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3711 commit e8314035996a9118ac5948df2ff8a2f2161ed67a
3712 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3713 Date: Thu Aug 28 12:31:51 2008 +0200
3715 soft_spi: move to drivers/spi
3717 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3719 commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
3720 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3721 Date: Thu Aug 28 12:31:51 2008 +0200
3723 soft_i2c: move to drivers/i2c
3725 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3727 commit 717a222229fdb77703e9174d0eb08a4b41febf49
3728 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3729 Date: Thu Aug 28 12:31:48 2008 +0200
3731 gunzip: move to lib_generic
3733 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3735 commit 52aef8f9ba28b747973bf76741c23db658d5773c
3736 Author: Wolfgang Ocker <weo@reccoware.de>
3737 Date: Tue Aug 26 19:55:23 2008 +0200
3739 ppc4xx: NAND configuration
3741 Made NAND bank configuration setting a config variable.
3743 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
3744 Signed-off-by: Stefan Roese <sr@denx.de>
3746 commit 5bc542a593abc9e974fbd34704af85c37c366c60
3747 Author: Victor Gallardo <vgallardo@amcc.com>
3748 Date: Thu Aug 28 16:03:28 2008 -0700
3750 ppc4xx: fix UIC external_interrupt hang on UIC0
3752 This patch fixes a UIC external_interrupt hang if critical or non-critical
3753 interrupt is set at the same time as a normal interrupt is set on UIC0.
3755 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
3756 Signed-off-by: Stefan Roese <sr@denx.de>
3758 commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
3759 Author: Prodyut Hazarika <phazarika@amcc.com>
3760 Date: Wed Aug 27 16:39:00 2008 -0700
3762 ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
3764 Removed Magic numbers from Initialization preload registers
3765 Tested with Kilauea, Glacier, Canyonlands and Katmai boards
3766 About 5-7% improvement seen for LMBench memtests
3768 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
3769 Signed-off-by: Stefan Roese <sr@denx.de>
3771 commit 8a490422bed685c9491274ec997f62061d88620b
3772 Author: John Rigby <jrigby@freescale.com>
3773 Date: Thu Aug 28 13:17:07 2008 -0600
3775 ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
3777 MPC5121 rev 2 silicon has a new register for controlling how long
3778 CS is asserted after deassertion of ALE in multiplexed mode.
3780 The default is to assert CS together with ALE. The alternative
3781 is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
3783 The default is wrong for the NOR flash and CPLD on the ADS5121.
3785 This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
3786 it does so conditionally based on silicon rev 2.0 or greater.
3788 Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
3789 Signed-off-by: John Rigby <jrigby@freescale.com>
3791 commit 5d9a5efa4b332f442b54a755d49969123c3a8742
3792 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3793 Date: Tue Aug 19 00:56:46 2008 +0600
3795 Add I2C frequency dividers for ColdFire
3797 The existing I2C freqency dividers for FDR does not apply
3798 to ColdFire platforms; thus, a seperate table is added
3799 based on MCF5xxx Reference Manual
3801 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
3802 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3803 Acked-by: Tabi Timur <timur@freescale.com>
3805 commit eec567a67e00d1ed8d941e9098b7d421f4091abf
3806 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3807 Date: Tue Aug 19 03:01:19 2008 +0600
3809 ColdFire: I2C fix for multiple platforms
3811 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3813 commit d53cf6a9c7423cba668b867978648645f71c3090
3814 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3815 Date: Tue Aug 19 00:37:13 2008 +0600
3817 ColdFire: Add CONFIG_MII_INIT for M5272C3
3819 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3821 commit f78ced3028d4130b24a318943a70cf5584ab16f4
3822 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3823 Date: Tue Aug 19 00:26:25 2008 +0600
3825 ColdFire: Multiple fixes for MCF5445x platforms
3827 Add FEC pin set and mii reset in __mii_init(). Change
3828 legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
3829 change cfi_offset to 0, and change CFG_FLASH_CFI to
3830 CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
3831 M54455EVB env settings in configuration file.
3833 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3835 commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
3836 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3837 Date: Fri Aug 15 18:24:25 2008 +0000
3839 ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
3841 The user manuals recommend 7.
3843 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
3844 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3846 commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
3847 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3848 Date: Fri Aug 15 16:50:07 2008 +0000
3850 ColdFire: Raise uart baudrate to 115200 bps
3852 M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
3853 uart baudrate increase from 19200 to 115200 bps
3855 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3857 commit ab6ba842682552ccf071d0034da0a20633d1d1ac
3858 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3859 Date: Wed Aug 13 12:07:03 2008 +0000
3861 ColdFire: Fix board.c warning message
3863 Implicit declaration of nand_init() warning message
3865 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3867 commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
3868 Author: Kumar Gala <galak@kernel.crashing.org>
3869 Date: Wed Aug 27 01:10:34 2008 -0500
3871 FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
3873 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3875 commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
3876 Author: Heiko Schocher <hs@denx.de>
3877 Date: Thu Aug 21 20:44:49 2008 +0200
3879 mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
3881 Signed-off-by: Heiko Schocher <hs@denx.de>
3883 commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
3884 Author: Kumar Gala <galak@kernel.crashing.org>
3885 Date: Tue Aug 19 14:46:36 2008 -0500
3887 mpc85xx: remove redudant code with lib_ppc/interrupts.c
3889 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
3890 not show how that happened, but there is no good reason for it.
3892 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
3895 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3897 commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
3898 Author: Kumar Gala <galak@kernel.crashing.org>
3899 Date: Fri Jul 25 13:31:05 2008 -0500
3901 mpc85xx: Add support for the MPC8536DS reference board
3903 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3904 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
3905 Signed-off-by: Dejan Minic <minic@freescale.com>
3906 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3907 Signed-off-by: Dave Liu <daveliu@freescale.com>
3908 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3910 commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
3911 Author: Kumar Gala <galak@kernel.crashing.org>
3912 Date: Tue Aug 12 11:14:19 2008 -0500
3914 mpc85xx: Add support for the MPC8536
3916 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
3917 also have SERDES init code for the 8536.
3919 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3920 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
3921 Signed-off-by: Dejan Minic <minic@freescale.com>
3922 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3923 Signed-off-by: Dave Liu <daveliu@freescale.com>
3925 commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
3926 Author: Kumar Gala <galak@kernel.crashing.org>
3927 Date: Tue Aug 12 11:13:08 2008 -0500
3929 mpc85xx: Add support for the MPC8572DS reference board
3931 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3933 commit 457caecdbca3df21a93abff19eab12dbc61b7897
3934 Author: Kumar Gala <galak@kernel.crashing.org>
3935 Date: Wed Aug 27 01:05:35 2008 -0500
3937 FSL DDR: Remove old SPD support from cpu/mpc85xx
3939 All 85xx boards have been converted to the new code so we can
3940 remove the old SPD DDR setup code.
3942 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3944 commit 0e7927db138976469e7257e29c1338050a50fcd9
3945 Author: Kumar Gala <galak@kernel.crashing.org>
3946 Date: Wed Aug 27 01:04:07 2008 -0500
3948 FSL DDR: Convert STXSSA to new DDR code.
3950 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3952 commit c360d9b970fbb9c13744c355879671165bbb9b9e
3953 Author: Kumar Gala <galak@kernel.crashing.org>
3954 Date: Wed Aug 27 01:03:42 2008 -0500
3956 FSL DDR: Convert STXGP3 to new DDR code.
3958 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3960 commit 8e55313b7ae12352a343f9b9962e662dbd897187
3961 Author: Kumar Gala <galak@kernel.crashing.org>
3962 Date: Tue Aug 26 23:52:58 2008 -0500
3964 FSL DDR: Convert SBC8560 to new DDR code.
3966 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3968 commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
3969 Author: Kumar Gala <galak@kernel.crashing.org>
3970 Date: Tue Aug 26 23:52:32 2008 -0500
3972 FSL DDR: Convert MPC8540EVAL to new DDR code.
3974 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3976 commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
3977 Author: Kumar Gala <galak@kernel.crashing.org>
3978 Date: Tue Aug 26 23:52:07 2008 -0500
3980 FSL DDR: Convert PM856 to new DDR code.
3982 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3984 commit d53bd3e17bd4f460257c19255569ea6dcfaae817
3985 Author: Kumar Gala <galak@kernel.crashing.org>
3986 Date: Tue Aug 26 23:51:49 2008 -0500
3988 FSL DDR: Convert PM854 to new DDR code.
3990 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3992 commit 33b9079ba20926f14238fff863b68a98e938948e
3993 Author: Kumar Gala <galak@kernel.crashing.org>
3994 Date: Tue Aug 26 23:15:28 2008 -0500
3996 FSL DDR: Convert sbc8548 to new DDR code.
3998 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4000 commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
4001 Author: Kumar Gala <galak@kernel.crashing.org>
4002 Date: Tue Aug 26 23:14:14 2008 -0500
4004 FSL DDR: Convert atum8548 to new DDR code.
4006 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4008 commit be0bd8234b9777ecd63c4c686f72af070d886517
4009 Author: Kumar Gala <galak@kernel.crashing.org>
4010 Date: Tue Aug 26 22:56:56 2008 -0500
4012 FSL DDR: Convert socrates to new DDR code.
4014 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4016 commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
4017 Author: Kumar Gala <galak@kernel.crashing.org>
4018 Date: Tue Aug 26 08:02:30 2008 -0500
4020 FSL DDR: Convert MPC8544DS to new DDR code.
4022 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4024 commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
4025 Author: Jon Loeliger <jdl@freescale.com>
4026 Date: Tue Mar 18 13:51:05 2008 -0500
4028 FSL DDR: Convert MPC8568MDS to new DDR code.
4030 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4031 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4033 commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
4034 Author: Jon Loeliger <jdl@freescale.com>
4035 Date: Tue Mar 18 13:51:06 2008 -0500
4037 FSL DDR: Convert MPC8548CDS to new DDR code.
4039 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4040 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4042 commit aa11d85cf318b961e029fe50d68ca47d004bce93
4043 Author: Jon Loeliger <jdl@freescale.com>
4044 Date: Mon Mar 17 15:48:18 2008 -0500
4046 FSL DDR: Convert MPC8541CDS to new DDR code.
4048 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4049 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4051 commit 2b40edb10d81da7bba724edbccd7f53777112579
4052 Author: Jon Loeliger <jdl@freescale.com>
4053 Date: Tue Mar 18 11:12:42 2008 -0500
4055 FSL DDR: Convert MPC8555ADS to new DDR code.
4057 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4058 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4060 commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
4061 Author: Jon Loeliger <jdl@freescale.com>
4062 Date: Tue Mar 18 11:12:44 2008 -0500
4064 FSL DDR: Convert MPC8560ADS to new DDR code.
4066 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4067 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4069 commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
4070 Author: Kumar Gala <galak@kernel.crashing.org>
4071 Date: Fri Jun 6 13:12:18 2008 -0500
4073 FSL DDR: Convert MPC8540ADS to new DDR code.
4075 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4077 commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
4078 Author: Kumar Gala <galak@kernel.crashing.org>
4079 Date: Tue Aug 26 21:34:55 2008 -0500
4081 FSL DDR: Add 85xx specific register setting
4083 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4085 commit 6fb1b7346849ccd0c20306143e334f5b76143070
4086 Author: Kumar Gala <galak@kernel.crashing.org>
4087 Date: Mon Jun 9 11:07:46 2008 -0500
4089 FSL DDR: Add e500 TLB helper for DDR code
4091 Provide a helper function that board code can call to map TLBs when
4094 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4096 commit d26b739afe5a6760bd345743188759cd9d0f3b47
4097 Author: Andrew Dyer <adyer@righthandtech.com>
4098 Date: Tue Aug 26 17:03:38 2008 -0500
4100 dm9000 remove dead external phy support, gpio fix
4102 dm9000 has code to detect and initialize external phy parts, but later
4103 on in the code the part is forced to use the internal phy
4104 unconditionally. Remove the unused/untested code.
4106 change the GPIO initialization so that only the GPIO used as an
4107 internal phy reset (hardwired in the chip) is set as an output. The
4108 remaining GPIO need to be handled by board specific code to prevent
4109 possible drive conflicts. Set as inputs for safety.
4111 replace a few magic numbers with defines
4113 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
4114 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4116 commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
4117 Author: Peter Tyser <ptyser@xes-inc.com>
4118 Date: Tue Aug 26 11:17:48 2008 -0500
4120 Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
4122 cmd_net.c command descriptions were updated to describe the optional
4123 hostIPaddr argument. The dhcp command help message was also updated
4124 to more closely reflect the other commands in cmd_net.c
4126 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4127 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4129 commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
4130 Author: Remy Bohmer <linux@bohmer.net>
4131 Date: Wed Aug 20 11:30:28 2008 +0200
4133 Fix bogus error message in the DHCP handler
4135 The DHCP handler has 1 state that is not listed in this case, causing a
4136 failure message when there is actually no failure.
4138 Signed-off-by: Remy Bohmer <linux@bohmer.net>
4139 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4141 commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
4142 Author: Remy Bohmer <linux@bohmer.net>
4143 Date: Wed Aug 20 11:30:27 2008 +0200
4145 Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
4147 The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
4148 missing extern inside the net/bootp.h header
4150 Signed-off-by: Remy Bohmer <linux@bohmer.net>
4151 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4153 commit 1803f7f91ff35ca402259065df7557107dcf28a2
4154 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4155 Date: Tue Aug 19 21:26:32 2008 +0000
4157 ColdFire: Add FEC Buffer descriptors in SRAM
4159 Add FEC Buffer descriptors and data buffer in SRAM for
4160 faster execution and access.
4162 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4163 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4165 commit 429be27ce195210d4b9decf9e867b9ca6155a87d
4166 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4167 Date: Thu Aug 21 23:55:11 2008 +0000
4169 Fix ColdFire FEC warning messages
4171 Types mismatch and implicit declaration of icache_invalid()
4174 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4175 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4177 commit 6a002171098e968bd5b362347d2831224fab6048
4178 Author: Ben Warren <biggerbadderben@gmail.com>
4179 Date: Sat Jul 12 00:17:50 2008 -0700
4181 Moved initialization of SKGE Ethernet driver to board code.
4183 The only board using this driver is the SL8245 board.
4184 Removed initialization for the driver from net/eth.c
4186 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4188 commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
4189 Author: Ben Warren <biggerbadderben@gmail.com>
4190 Date: Sat Jul 12 00:08:45 2008 -0700
4192 Moved conditional compilation to Makefile for SK98 Ethernet driver
4194 Brute-force removal of #ifdefs. Didn't touch the code.
4195 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4197 commit 65d3d99c28dc363d15eaee78225ff643df499b97
4198 Author: Ben Warren <biggerbadderben@gmail.com>
4199 Date: Fri Jul 11 23:42:19 2008 -0700
4201 Moved initialization of ULI526X Ethernet driver to board code.
4203 The only board using this driver is the Freescale MPC8610HPCD board.
4204 Removed initialization for the driver from net/eth.c
4206 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4208 commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
4209 Author: Ben Warren <biggerbadderben@gmail.com>
4210 Date: Fri Jul 11 23:15:28 2008 -0700
4212 Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
4214 Added board_eth_init() function to bf537-stamp board.
4215 Removed initialization for the Blackin EMAC driver from net/eth.c
4217 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4219 commit fc363ce35408f348cacced68505f3747a53e3d7c
4220 Author: Ben Warren <biggerbadderben@gmail.com>
4221 Date: Wed Jul 9 01:04:19 2008 -0700
4223 Moved initialization of GRETH Ethernet driver to CPU directory
4225 Added a cpu_eth_init() function to leon2/leon3 CPU directories and
4226 removed code from net/eth.c
4228 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4230 commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
4231 Author: Ben Warren <biggerbadderben@gmail.com>
4232 Date: Tue Aug 26 22:16:25 2008 -0700
4234 Moved initialization of MCFFEC Ethernet driver to CPU directory
4236 Added a cpu_eth_init() function to coldfire CPU directories and
4237 removed code from net/eth.c
4239 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4241 commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
4242 Author: Ben Warren <biggerbadderben@gmail.com>
4243 Date: Tue Aug 26 22:12:36 2008 -0700
4245 Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
4247 Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
4248 removed code from net/eth.c
4250 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4252 commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
4253 Author: Kumar Gala <galak@kernel.crashing.org>
4254 Date: Tue Aug 26 15:01:38 2008 -0500
4256 FSL DDR: Remove old SPD support from cpu/mpc86xx
4258 All 86xx boards have been converted to the new code so we can
4259 remove the old SPD DDR setup code.
4261 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4263 commit 9bd4e5911b750837515466bc7449087698b88e0e
4264 Author: Kumar Gala <galak@kernel.crashing.org>
4265 Date: Tue Aug 26 15:01:37 2008 -0500
4267 FSL DDR: Convert SBC8641D to new DDR code.
4269 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4271 commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
4272 Author: Jon Loeliger <jdl@freescale.com>
4273 Date: Tue Aug 26 15:01:36 2008 -0500
4275 FSL DDR: Convert MPC8610HPCD to new DDR code.
4277 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4278 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4280 commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
4281 Author: Kumar Gala <galak@kernel.crashing.org>
4282 Date: Tue Aug 26 15:01:35 2008 -0500
4284 FSL DDR: Convert MPC8641HPCN to new DDR code.
4286 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4287 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4289 commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
4290 Author: Kumar Gala <galak@kernel.crashing.org>
4291 Date: Tue Aug 26 15:01:34 2008 -0500
4293 FSL DDR: Add 86xx specific register setting
4295 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4297 commit 233fdd502a6c227f476212b3097653ad48d7e254
4298 Author: Kumar Gala <galak@kernel.crashing.org>
4299 Date: Tue Aug 26 15:01:32 2008 -0500
4301 FSL DDR: Add DDR2 DIMM paramter support
4303 Compute DIMM parameters based upon the SPD information.
4305 Signed-off-by: James Yang <James.Yang@freescale.com>
4306 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4307 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4309 commit 05c05a2363a6ac11e0e405926034546ffad71fad
4310 Author: Kumar Gala <galak@kernel.crashing.org>
4311 Date: Tue Aug 26 15:01:30 2008 -0500
4313 FSL DDR: Add DDR1 DIMM paramter support
4315 Compute DIMM parameters based upon the SPD information in spd.
4317 Signed-off-by: James Yang <James.Yang@freescale.com>
4318 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4319 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4321 commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
4322 Author: Kumar Gala <galak@kernel.crashing.org>
4323 Date: Tue Aug 26 15:01:29 2008 -0500
4325 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
4327 The main purpose of this rewrite it to be able to share the same
4328 initialization code on all FSL PowerPC products that have DDR
4329 controllers. (83xx, 85xx, 86xx).
4331 The code is broken up into the following steps:
4334 COMPUTE_COMMON_PARMS
4340 This allows us to share more code an easily allow for board specific code
4343 Additionally this code base adds support for >4G of DDR and provides a
4344 foundation for supporting interleaving on processors with more than one
4347 Signed-off-by: James Yang <James.Yang@freescale.com>
4348 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4349 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
4350 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4351 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4353 commit f784e32b4bce0013983506b11af4b85b8ca3d36e
4354 Author: Kumar Gala <galak@kernel.crashing.org>
4355 Date: Tue Aug 26 15:01:28 2008 -0500
4357 FSL DDR: Provide a generic set_ddr_laws()
4359 Provide a helper function that will setup the last available
4360 LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
4362 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4364 commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
4365 Author: James Yang <James.Yang@freescale.com>
4366 Date: Tue Aug 26 15:01:27 2008 -0500
4368 Add proper SPD definitions for DDR1/2/3
4370 Also adds helper functions for DDR1/2 to verify the checksum.
4372 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4374 commit 285db74716c724ae8a0ff177878fd09a74428c7b
4375 Author: Wolfgang Denk <wd@denx.de>
4376 Date: Wed Aug 27 01:02:48 2008 +0200
4380 Signed-off-by: Wolfgang Denk <wd@denx.de>
4382 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
4383 Author: Heiko Schocher <hs@denx.de>
4384 Date: Tue Aug 19 10:08:49 2008 +0200
4386 Add support for muas3001 board (MPC8270)
4388 Signed-off-by: Heiko Schocher <hs@denx.de>
4390 commit 322098bff32410d2a00031649b47c4ec90a66d9a
4391 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4392 Date: Tue Aug 19 08:31:18 2008 +0530
4394 common/cmd_load.c cleanup - remove unused variables
4396 - Remove unused global variable os_data_count.
4397 - Remove unused variable z.
4399 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
4401 commit 306620b762a4f9fa6678568ad2e8772dec145208
4402 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
4403 Date: Mon Aug 18 13:35:27 2008 +0200
4407 MVS1 board has reached end-of-life and can be removed completely.
4409 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
4411 commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
4412 Author: Kumar Gala <galak@kernel.crashing.org>
4413 Date: Fri Aug 15 08:24:45 2008 -0500
4415 bootm: refactor do_reset and os boot function args
4417 There is no need for each OS specific function to call do_reset() we
4418 can just do it once in bootm. This means its feasible on an error for
4419 the OS boot function to return.
4421 Also, remove passing in cmd_tbl_t as its not needed by the OS boot
4422 functions. flag isn't currently used but might be in the future so
4425 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4427 commit 40afac22a9c602e55c501c800f1c064324711b56
4428 Author: Kumar Gala <galak@kernel.crashing.org>
4429 Date: Fri Aug 15 08:24:44 2008 -0500
4431 fdt: Added resize command
4433 Resize the fdt to size + padding to 4k boundary
4435 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4437 commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
4438 Author: Kumar Gala <galak@kernel.crashing.org>
4439 Date: Fri Aug 15 08:24:43 2008 -0500
4441 fdt: refactor initrd related code
4443 Created a new fdt_initrd() to deal with setting the initrd properties
4444 in the device tree and fixing up the mem reserve. We can use this
4445 both in the choosen node handling and lets us remove some duplicated
4446 code when we fixup the initrd info in bootm on PPC.
4448 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4450 commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
4451 Author: Kumar Gala <galak@kernel.crashing.org>
4452 Date: Fri Aug 15 08:24:42 2008 -0500
4454 fdt: refactor fdt resize code
4456 Move the fdt resizing code out of ppc specific boot code and into
4457 common fdt support code.
4459 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4461 commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
4462 Author: Kumar Gala <galak@kernel.crashing.org>
4463 Date: Fri Aug 15 08:24:41 2008 -0500
4465 bootm: refactor image detection and os load steps
4467 Created a bootm_start() that handles the parsing and detection of all
4468 the images that will be used by the bootm command (OS, ramdisk, fdt).
4469 As part of this we now tract all the relevant image offsets in the
4470 bootm_headers_t struct. This will allow us to have all the needed
4471 state for future sub-commands and lets us reduce a bit of arch
4472 specific code on SPARC.
4474 Created a bootm_load_os() that deals with decompression and loading
4477 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4479 commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
4480 Author: Kumar Gala <galak@kernel.crashing.org>
4481 Date: Fri Aug 15 08:24:40 2008 -0500
4483 bootm: move lmb into the bootm_headers_t structure
4485 To allow for persistent state between future bootm subcommands we
4486 need the lmb to exist in a global state.
4487 Moving it into the bootm_headers_t allows us to do that.
4489 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4491 commit 54f9c86691309b2f919f567f9255b8bcad2c7651
4492 Author: Kumar Gala <galak@kernel.crashing.org>
4493 Date: Fri Aug 15 08:24:39 2008 -0500
4495 bootm: Set working fdt address as part of the bootm flow
4497 Set the fdt working address so "fdt FOO" commands can be used as part
4498 of the bootm flow. Also set an the environment variable "fdtaddr"
4501 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4503 commit 06a09918f3903450313e2047a9cc258bf5872f46
4504 Author: Kumar Gala <galak@kernel.crashing.org>
4505 Date: Fri Aug 15 08:24:38 2008 -0500
4507 bootm: refactor fdt locating and relocation code
4509 Move the code that handles finding a device tree blob and relocating
4510 it (if needed) into common code so all arch's have access to it.
4512 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4514 commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
4515 Author: Kumar Gala <galak@kernel.crashing.org>
4516 Date: Fri Aug 15 08:24:37 2008 -0500
4518 bootm: refactor ramdisk locating code
4520 Move determing if we have a ramdisk and where its located into the
4521 common code. Keep track of the ramdisk start and end in the
4522 bootm_headers_t image struct.
4524 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4526 commit c160a9544743e80e8889edb2275538e7764ce334
4527 Author: Kumar Gala <galak@kernel.crashing.org>
4528 Date: Fri Aug 15 08:24:36 2008 -0500
4530 bootm: refactor entry point code
4532 Move entry point code out of each arch and into common code.
4533 Keep the entry point in the bootm_headers_t images struct.
4535 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4537 commit 20220d22b9f41446288588cd2e457e0077a18bed
4538 Author: Randy Vinson <rvinson@mvista.com>
4539 Date: Wed Aug 13 11:44:57 2008 -0700
4541 mpc7448hpc2: Fix PCI I/O space mapping.
4543 PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
4544 PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
4545 space such that 0xFA000000 in the processor's address space maps to 0
4548 Signed-off-by Randy Vinson <rvinson@mvista.com>
4549 Acked-by: Roy Zang <tie-fei.zang@freescale.com>
4551 commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
4552 Author: Guennadi Liakhovetski <lg@denx.de>
4553 Date: Wed Aug 13 18:10:26 2008 +0200
4555 i.MX31: Specify maintainers for i.MX31-based boards
4557 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4558 Signed-off-by: Wolfgang Denk <wd@denx.de>
4560 commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
4561 Author: Wolfgang Denk <wd@denx.de>
4562 Date: Tue Aug 26 15:01:28 2008 +0200
4564 ADS5121: adjust image addresses in RAM and flash
4566 Use the same mapping in flash as used by Linux
4568 Signed-off-by: Wolfgang Denk <wd@denx.de>
4570 commit 19f101412c16edee9fd55db4039e1d68a833b28b
4571 Author: Wolfgang Denk <wd@denx.de>
4572 Date: Tue Aug 26 13:14:34 2008 +0200
4574 cmd_mem.c: Fix help message alignment
4576 Bug was introced by "Big white-space cleanup" (53677ef1)
4578 Signed-off-by: Wolfgang Denk <wd@denx.de>
4580 commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
4581 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
4582 Date: Wed Aug 20 11:11:52 2008 +0200
4584 change mvBL-M7 default env and move to vendor subdir
4586 fix mvBL-M7 config and move to matrix_vision subdir
4588 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
4589 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4591 commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
4592 Author: Nick Spence <nick.spence@freescale.com>
4593 Date: Fri Aug 22 23:52:40 2008 -0700
4595 MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
4597 This patch adds elements to the 83xx sysconf structure and #define values that are used
4598 by mpc83xx family devices.
4600 Signed-off-by: Nick Spence <nick.spence@freescale.com>
4601 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4603 commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
4604 Author: Ira W. Snyder <iws@ovro.caltech.edu>
4605 Date: Fri Aug 22 11:00:15 2008 -0700
4607 MPC8349EMDS: Add PCI Agent (PCISLAVE) support
4609 Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
4610 PCI card rather than a host computer.
4612 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
4613 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4615 commit 4ff9aea9d6b5602683a920951ef896996438af62
4616 Author: Ira W. Snyder <iws@ovro.caltech.edu>
4617 Date: Fri Aug 22 11:00:14 2008 -0700
4619 mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
4621 This adds a helper function to unlock the PCI configuration bit, so that
4622 any extra PCI setup (such as outbound windows, etc.) can be done after
4623 using the 83XX_GENERIC_PCI code to set up the PCI bus.
4625 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
4626 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4628 commit 162338e1fcde231ca4d562e5ebd7859456731691
4629 Author: Ira W. Snyder <iws@ovro.caltech.edu>
4630 Date: Fri Aug 22 11:00:13 2008 -0700
4632 MPC8349EMDS: use 83XX_GENERIC_PCI setup code
4634 Change the MPC8349EMDS board to use the generic PCI initialization code
4635 for the mpc83xx cpu.
4637 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
4638 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4640 commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
4641 Author: Kim Phillips <kim.phillips@freescale.com>
4642 Date: Mon Aug 25 14:53:09 2008 -0500
4644 fix out of tree building
4646 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4648 commit a49d10cf027d059ee15c262010a05cdaec0961e1
4649 Author: Wolfgang Denk <wd@denx.de>
4650 Date: Mon Aug 25 23:45:41 2008 +0200
4652 Minor coding style cleanup, updte CHANGELOG
4654 Signed-off-by: Wolfgang Denk <wd@denx.de>
4656 commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
4657 Author: Stefan Roese <sr@denx.de>
4658 Date: Wed Aug 20 20:29:38 2008 +0200
4660 RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
4662 This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
4663 to combine both config options into one line. This even allows defining
4664 both options and not generating the target object twice.
4666 Signed-off-by: Stefan Roese <sr@denx.de>
4668 commit 079edb913dbae147b50a488cf02e03f473fc5f28
4669 Author: Jens Gehrlein <sew_s@tqs.de>
4670 Date: Fri Jul 4 16:50:05 2008 +0200
4672 MX31: fix bit masks in function mx31_decode_pll()
4674 Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
4676 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
4678 commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
4679 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4680 Date: Mon Aug 25 11:11:34 2008 +0200
4682 Correct ARM Versatile Timer Initialization
4684 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
4685 -- Timer Value Register @ TIMER Base + 4 is Read-only.
4686 -- Prescale Value (Bits 3-2 of TIMER Control register)
4687 can only be one of 00,01,10. 11 is undefined.
4688 -- CFG_HZ for Versatile board is set to
4689 #define CFG_HZ (1000000 / 256)
4690 So Prescale bits is set to indicate
4691 - 8 Stages of Prescale, Clock divided by 256
4692 - The Timer Control Register has one Undefined/Shouldn't Use Bit
4693 So we should do read/modify/write Operation
4695 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
4697 commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
4698 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4699 Date: Mon Aug 25 11:30:29 2008 +0200
4701 Add ARM AMBA PL031 RTC Support
4703 Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4705 commit e39411674669cc880e1ec4a8ca4794fb15c33a45
4706 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4707 Date: Tue Aug 19 16:21:03 2008 -0400
4709 ARM DaVinci: Removed redundant NAND initialization code.
4711 ARM DaVinci: Removed redundant NAND initialization code.
4713 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4715 commit b3fb663b20d995ca41327db877ddb168279b3f62
4716 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4717 Date: Tue Aug 19 16:21:00 2008 -0400
4719 ARM DaVinci: Fix compilation error with new MTD code.
4721 ARM DaVinci: Fix compilation error with new MTD code.
4723 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4725 commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
4726 Author: Gerald Van Baren <vanbaren@cideas.com>
4727 Date: Fri Aug 22 14:37:05 2008 -0400
4729 Add note on dereferencing /aliases pointers
4731 Replace the "must quote special characters" note with a hint on
4732 how to dereference /aliases pointers by omitting the leading "/".
4733 This feature was introduced by Kumar Gala as a libfdt enhancement
4734 in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
4738 => fdt print /aliases
4740 ethernet0 = "/qe@e0100000/ucc@2000";
4741 ethernet1 = "/qe@e0100000/ucc@3000";
4742 serial0 = "/soc8360@e0000000/serial@4500";
4743 serial1 = "/soc8360@e0000000/serial@4600";
4744 pci0 = "/pci@e0008500";
4746 => fdt print ethernet0
4748 device_type = "network";
4749 compatible = "ucc_geth";
4751 reg = <0x2000 0x200>;
4752 interrupts = <0x20>;
4753 interrupt-parent = <0x2>;
4754 local-mac-address = [00 00 00 00 00 00];
4755 rx-clock-name = "none";
4756 tx-clock-name = "clk9";
4758 phy-connection-type = "rgmii-id";
4762 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4764 commit feeca3f578b7f53c032ba203698751c982f8bf5a
4765 Author: Kumar Gala <galak@kernel.crashing.org>
4766 Date: Thu Aug 14 08:28:19 2008 -0500
4768 libfdt: Add support for using aliases in fdt_path_offset()
4770 If the path doesn't start with '/' check to see if it matches some alias
4771 under "/aliases" and substitute the matching alias value in the path
4772 and retry the lookup.
4774 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4775 Acked-by: David Gibson <david@gibson.dropbear.id.au>
4776 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
4778 commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
4779 Author: David Gibson <david@gibson.dropbear.id.au>
4780 Date: Wed Aug 6 14:50:49 2008 +1000
4782 libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
4784 As well as fdt_subnode_offset(), libfdt includes an
4785 fdt_subnode_offset_namelen() function that takes the subnode name to
4786 look up not as a NUL-terminated string, but as a string with an
4787 explicit length. This can be useful when the caller has the name as
4788 part of a longer string, such as a full path.
4790 However, we don't have corresponding 'namelen' versions for
4791 fdt_get_property() and fdt_getprop(). There are less obvious use
4792 cases for these variants on property names, but there are
4793 circumstances where they can be useful e.g. looking up property names
4794 which need to be parsed from a longer string buffer such as user input
4795 or a configuration file, or looking up an alias in a path with
4796 IEEE1275 style aliases.
4798 So, since it's very easy to implement such variants, this patch does
4799 so. The original NUL-terminated variants are, of course, implemented
4800 in terms of the namelen versions.
4802 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4804 commit f171746f701ea58bf6a53e835b53d2aaebee0d81
4805 Author: David Gibson <david@gibson.dropbear.id.au>
4806 Date: Tue Jul 29 14:51:22 2008 +1000
4808 libfdt: Forgot one function when cleaning the namespace
4810 In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
4811 libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
4812 chance of collisions with things from whatever package libfdt is
4813 embedded in, pulled into the libfdt build via that environment's
4816 Except... I missed one. This patch applies the same treatment to
4817 _stringlist_contains(). While we're at it, also make it static since
4818 it's only used in the same file.
4820 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4822 commit 46390da15411351fc3b498bd8c1615f78fe80df0
4823 Author: Wolfram Sang <w.sang@pengutronix.de>
4824 Date: Wed Jul 9 11:22:44 2008 +0200
4826 libfdt: Improve documentation in libfdt.h
4828 Fix a few typos and mistakes.
4830 Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
4831 Acked-by: David Gibson <david@gibson.dropbear.id.au>
4833 commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
4834 Author: David Gibson <david@gibson.dropbear.id.au>
4835 Date: Wed Jul 9 14:10:24 2008 +1000
4837 libfdt: Increase namespace-pollution paranoia
4839 libfdt is supposed to easy to embed in projects all and sundry.
4840 Often, it won't be practical to separate the embedded libfdt's
4841 namespace from that of the surrounding project. Which means there can
4842 be namespace conflicts between even libfdt's internal/static functions
4843 and functions or macros coming from the surrounding project's headers
4846 This patch, therefore, renames a bunch of libfdt internal functions
4847 and macros and makes a few other chances to reduce the chances of
4848 namespace collisions with embedding projects. Specifically:
4849 - Internal functions (even static ones) are now named _fdt_*()
4851 - The type and (static) global for the error table in
4852 fdt_strerror() gain an fdt_ prefix
4854 - The unused macro PALIGN is removed
4856 - The memeq and streq macros are removed and open-coded in the
4857 users (they were only used once each)
4859 - Other macros gain an FDT_ prefix
4861 - To save some of the bulk from the previous change, an
4862 FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
4863 FDT_ALIGN(x, FDT_TAGSIZE)
4865 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4867 commit c66830263af19831f2b7db307f79d1943febf7f9
4868 Author: David Gibson <david@gibson.dropbear.id.au>
4869 Date: Mon Jul 7 10:14:15 2008 +1000
4871 dtc: Enable and fix -Wcast-qual warnings
4873 Enabling -Wcast-qual warnings in dtc shows up a number of places where
4874 we are incorrectly discarding a const qualification. There are also
4875 some places where we are intentionally discarding the 'const', and we
4876 need an ugly cast through uintptr_t to suppress the warning. However,
4877 most of these are pretty well isolated with the *_w() functions. So
4878 in the interests of maximum safety with const qualifications, this
4879 patch enables the warnings and fixes the existing complaints.
4881 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4882 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
4884 commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
4885 Author: David Gibson <david@gibson.dropbear.id.au>
4886 Date: Mon Jul 7 10:10:48 2008 +1000
4888 dtc: Enable and fix -Wpointer-arith warnings
4890 This patch turns on the -Wpointer-arith option in the dtc Makefile,
4891 and fixes the resulting warnings due to using (void *) in pointer
4892 arithmetic. While convenient, pointer arithmetic on void * is not
4893 portable, so it's better that we avoid it, particularly in libfdt.
4895 Also add necessary definition of uintptr_t needed by David Gibson's
4896 changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
4897 comes from stdint.h, which u-boot doesn't have). -- gvb
4899 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4900 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4902 commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
4903 Author: Tirumala R Marri <tmarri@amcc.com>
4904 Date: Thu Aug 21 21:54:53 2008 -0700
4906 ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
4908 During recent PCI-E tests it has been found that current
4909 driverl level and de-emphasis values are not set correctly.
4910 After sweeping throgh all de-ephasis values, it was found that
4911 0x130 is a right value. Where 0x13 is driver level and 0 is
4914 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
4915 Signed-off-by: Stefan Roese <sr@denx.de>
4917 commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
4918 Author: Remy Bohmer <linux@bohmer.net>
4919 Date: Wed Aug 20 20:46:56 2008 +0200
4921 Make the YAFFS filesystem work
4923 Recently the YAFFS filesystem support has been added to U-boot.
4924 However, just enabling CONFIG_YAFFS2 is not enough to get it working.
4926 ymount will generate an exception (when dereferencing mtd->readoob()), because
4927 the genericDevice is a null pointer. Further, a lot of logging is produced
4928 while using YAFFS fs, so logging should also be disabled.
4929 Both issues are solved by this patch.
4931 With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
4932 in U-boot, as well as in Linux.
4934 Tested on a Atmel AT91SAM9261EK board.
4936 Signed-off-by: Remy Bohmer <linux@bohmer.net>
4937 Acked-by: William Juul <william.juul@tandberg.com>
4938 Signed-off-by: Scott Wood <scottwood@freescale.com>
4940 commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
4941 Author: Kyungmin Park <kmpark@infradead.org>
4942 Date: Tue Aug 19 08:42:53 2008 +0900
4944 Fix OneNAND read_oob/write_oob functions compatability
4946 Also sync with kernel OneNAND codes
4948 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
4949 Signed-off-by: Scott Wood <scottwood@freescale.com>
4951 commit 8d765456c1d33f2010d2717ee58de7647fdc6346
4952 Author: Scott Wood <scottwood@freescale.com>
4953 Date: Mon Aug 18 17:11:20 2008 -0500
4955 NAND: Remove delay from nand_boot_fsl_elbc.c.
4957 It was for debugging purposes, and shouldn't have been left in.
4959 Signed-off-by: Scott Wood <scottwood@freescale.com>
4961 commit f556483734126793522fb7a8cf36af90da78f084
4962 Author: Stefan Roese <sr@denx.de>
4963 Date: Thu Aug 21 11:05:03 2008 +0200
4965 ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
4967 This patch fixes some minor issues introduced with the patch:
4968 ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
4970 - Rework memory-queue and PLB arbiter optimization code, that the
4971 local variable is not needed anymore. This removes one #ifdef.
4972 - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
4973 of XXX+ 0x01). This was not introduced by Prodyut, just a
4976 Signed-off-by: Stefan Roese <sr@denx.de>
4978 commit 079589bcfb24ba11068460276a3cc9549ab5346f
4979 Author: Prodyut Hazarika <phazarika@amcc.com>
4980 Date: Wed Aug 20 09:38:51 2008 -0700
4982 ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
4983 PPC405EX and PPC460EX/GT/SX
4985 - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
4987 - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
4988 across processors (405 and 440/460)
4989 - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
4991 - Add register bit definitions for Memory Queue Configuration registers
4993 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
4994 Signed-off-by: Stefan Roese <sr@denx.de>
4996 commit ba37aa03287c5483c61c0a3e320c8888bee0143a
4997 Author: Kumar Gala <galak@kernel.crashing.org>
4998 Date: Tue Aug 19 15:41:18 2008 -0500
5000 fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
5002 Move to using the environment variables 'ethaddr', 'eth1addr', etc..
5003 instead of bd->bi_enetaddr, bi_enet1addr, etc.
5005 This makes the code a bit more flexible to the number of ethernet
5008 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5010 commit 4cacf7c64609839f809e2f9c45873f1d65861703
5011 Author: Stefan Roese <sr@denx.de>
5012 Date: Tue Aug 19 14:57:55 2008 +0200
5014 hush: Fix printf debug macro in hush.c so that it usable in U-Boot
5016 This patch changes the debug_printf() marco for U-Boot in hush.c and
5017 moves the definition of DEBUG_SHELL to a place that is actually compiled
5020 Signed-off-by: Stefan Roese <sr@denx.de>
5022 commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
5023 Author: Heiko Schocher <hs@denx.de>
5024 Date: Tue Aug 19 09:57:41 2008 +0200
5026 cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
5028 Commit 00b1883a4cac59d97cd297b1a3a398db85982865
5029 missed a few boards:
5030 include/configs/M5253DEMO.h
5031 include/configs/ml507.h
5032 include/configs/redwood.h
5034 This patch fixes this.
5036 Signed-off-by: Heiko Schocher <hs@denx.de>
5038 commit 0768b7a872964085eece8d5e9fec9175e9deb161
5039 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5040 Date: Mon Aug 18 13:41:27 2008 +0200
5042 Consolidate strmhz() implementation
5044 ARM, i386, m68k and ppc all have identical implementations of strmhz().
5045 Other architectures don't provide this function at all.
5047 This patch moves strmhz() into lib_generic, reducing code duplication
5048 and providing a more unified API across architectures.
5050 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5052 commit a928d0df211f1d829308d335d19be3ca42558dfc
5053 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
5054 Date: Mon Aug 18 12:02:51 2008 +0200
5056 fix mvbc_p board build warnings
5058 fix build warnings @ mvBC-P board by using correct types, i.e. change
5059 out_be32 to out_be16 and out_8 accordingly.
5061 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
5063 commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
5064 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5065 Date: Sat Aug 16 18:54:27 2008 +0200
5067 Makefile: fix posix support on find
5069 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5071 commit bef92e215d945cc574399c1a1b00a3a76d35aa03
5072 Author: Axel Beierlein <belatronix@web.de>
5073 Date: Sat Aug 16 00:30:48 2008 +0200
5075 Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
5077 Tested with TQM5200S on STK52XX.200 Board
5079 Signed-off-by: Axel Beierlein <belatronix@web.de>
5081 commit 0800707b6d5041a840a65d556032c15c584b55f8
5082 Author: Peter Tyser <ptyser@xes-inc.com>
5083 Date: Fri Aug 15 14:36:32 2008 -0500
5085 mod_i2c_mem() bugfix
5087 The last used chip, address, and address length were not being
5088 stored for the imm and imn commands.
5090 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5092 commit 4afbef967275b2f636abae86f91b81becee7ad03
5093 Author: Steven A. Falco <sfalco@harris.com>
5094 Date: Fri Aug 15 15:37:31 2008 -0400
5096 Fix typo in spelling of ATAPI.
5098 Correct a small spelling mistake.
5100 Signed-off-by: Steven A. Falco <sfalco@harris.com>
5102 commit 36c2d3062ecc6ab85f8e237180eb134464c48418
5103 Author: Steven A. Falco <sfalco@harris.com>
5104 Date: Fri Aug 15 15:34:10 2008 -0400
5106 Add a hook to allow board-specific PIO mode setting.
5108 This patch adds a hook whereby a board-specific routine can be called to
5109 configure hardware for a PIO mode. The prototype for the board-specific
5112 int inline ide_set_piomode(int pio_mode)
5114 ide_set_piomode should be prepared to configure hardware for a pio_mode
5115 between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
5117 Signed-off-by: Steven A. Falco <sfalco@harris.com>
5119 commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
5120 Author: Steven A. Falco <sfalco@harris.com>
5121 Date: Fri Aug 15 15:29:12 2008 -0400
5123 Replace enums in ata.h with an include of libata.h
5125 This patch removes some enums from ata.h and replaces them with an
5126 include of libata.h. This way, we eliminate duplicated code, and
5127 prevent errors whereby the different versions could be out of sync.
5129 Signed-off-by: Steven A. Falco <sfalco@harris.com>
5131 commit 0de0afbca865ecf482b4d2b635236746def8518f
5132 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5133 Date: Fri Aug 15 18:32:41 2008 +0200
5135 coldfire: fix CFI drivers activation with new macro
5137 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
5139 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5141 commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
5142 Author: Kumar Gala <galak@kernel.crashing.org>
5143 Date: Fri Aug 15 08:24:35 2008 -0500
5145 fdt: fdt addr w/o any args reports back the current working address
5147 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5149 commit f953d99fd528a496b400a706b511eaf8e3ea66af
5150 Author: Kumar Gala <galak@kernel.crashing.org>
5151 Date: Fri Aug 15 08:24:34 2008 -0500
5153 fdt: added the ability to set initrd start/end via chosen command
5155 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5157 commit ffa4bafacaef67058463b3d7d0099ced57569dd2
5158 Author: Kumar Gala <galak@kernel.crashing.org>
5159 Date: Fri Aug 15 08:24:33 2008 -0500
5161 Add command to enable/disable interrupts
5163 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5165 commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
5166 Author: Nick Spence <nick.spence@freescale.com>
5167 Date: Tue Aug 19 22:21:16 2008 -0700
5169 CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
5171 This patch fixes a missing vendor code in the flash_real_protect() function.
5173 Signed-off-by: Nick Spence <nick.spence@freescale.com>
5174 Signed-off-by: Stefan Roese <sr@denx.de>
5176 commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
5177 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5178 Date: Tue Aug 19 16:53:39 2008 +0000
5180 CFI: Fix AMD Legacy sector protect
5182 New implement sector lock and unlock or softlock commands
5183 do not exist in AMD legacy flash. Thus, causing issue
5184 when erasing AMD legacy flash (such as lv040)
5186 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5187 Signed-off-by: Stefan Roese <sr@denx.de>
5189 commit 492671404140f09d5b21b3d2ce4e362c0692c069
5190 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5191 Date: Wed Aug 20 09:40:16 2008 +0200
5193 hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
5195 CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
5197 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5199 commit 33eac2b3d946fc998a09245dfe54d017079b9056
5200 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5201 Date: Wed Aug 20 09:28:36 2008 +0200
5203 hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
5205 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5207 commit 25da0b84195fdda89a943b2d25757db5afeef5b8
5208 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5209 Date: Wed Aug 20 09:27:37 2008 +0200
5211 favr-32-ezkit: Fix printf format warnings
5213 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5215 commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
5216 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5217 Date: Fri Aug 15 12:04:25 2008 +0200
5219 MAINTAINERS: Sort avr32 section alphabetically
5221 The rest of the MAINTAINERS file appears to be sorted
5222 almost-alphabetically, but entries for the newly added AVR32 boards were
5223 added somewhat randomly. This patch sorts the list alphabetically again.
5225 Also update my e-mail address. The old one still works, but it may not
5228 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5230 commit 13b50fe3bc065c48911fa373231421280855a9d6
5231 Author: Mark Jackson <mpfj@mimc.co.uk>
5232 Date: Wed Jul 30 13:07:27 2008 +0100
5234 avr32: Add MIMC200 board
5236 The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
5237 8MByte FLASH and 128KByte FRAM.
5239 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
5240 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5242 commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
5243 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5244 Date: Wed Jul 9 21:07:34 2008 +0900
5246 rtl8169: add support for RTL8110SCL
5248 This patch fixes a problem that RTL8110SCL started transfer
5249 with an incorrect memory address.
5251 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5252 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5254 commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
5255 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5256 Date: Wed Jun 25 15:48:52 2008 -0500
5258 Fix dm9000 receive status and len little endian issue
5260 The received status and len was in little endian
5261 format and caused the ethernet unable to proceed
5262 further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
5264 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5265 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5267 commit fcd69a1a57fb2af4d26201422095a4be9f36963e
5268 Author: Kumar Gala <galak@kernel.crashing.org>
5269 Date: Fri Aug 15 08:24:32 2008 -0500
5271 Clean up usage of icache_disable/dcache_disable
5273 There is no point in disabling the icache on 7xx/74xx/86xx parts and not
5274 also flushing the icache. All callers of invalidate_l1_instruction_cache()
5275 call icache_disable() right after. Make it so icache_disable() calls
5276 invalidate_l1_instruction_cache() for us.
5278 Also, dcache_disable() already calls dcache_flush() so there is no point
5279 in the explicit calls of dcache_flush().
5281 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5283 commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
5284 Author: Kumar Gala <galak@kernel.crashing.org>
5285 Date: Fri Aug 15 08:24:31 2008 -0500
5287 Update linux bootm to support ePAPR client interface
5289 The ePAPR spec has some subtle differences from the current device
5290 tree based boot interface to the powerpc linux kernel. The powerpc
5291 linux kernel currently ignores the differences that ePAPR specifies.
5293 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5295 commit b734e5556a239b3be5f9693b2f4b4b739683ec16
5296 Author: Wolfgang Denk <wd@denx.de>
5297 Date: Mon Aug 18 23:50:20 2008 +0200
5299 Minor code cleanup: keep lists sorted.
5301 Signed-off-by: Wolfgang Denk <wd@denx.de>
5303 commit d0039d4ed275e6ca09fb417895024ad02be118c4
5304 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
5305 Date: Wed Jul 23 19:10:14 2008 +0200
5307 Add support for ADT7460 I2C monitor chip
5309 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
5311 commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
5312 Author: Michal Simek <monstr@monstr.eu>
5313 Date: Mon Jul 14 19:45:45 2008 +0200
5315 video: Clean drivers/video/Makefile
5317 Signed-off-by: Michal Simek <monstr@monstr.eu>
5319 commit 871c18dd301752270e1f74328c846c3104be1e2e
5320 Author: Michal Simek <monstr@monstr.eu>
5321 Date: Mon Jul 14 19:45:37 2008 +0200
5323 rtc: Clean drivers/rtc/Makefile
5325 Signed-off-by: Michal Simek <monstr@monstr.eu>
5327 commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
5328 Author: Michal Simek <monstr@monstr.eu>
5329 Date: Mon Jul 14 19:45:35 2008 +0200
5331 i2c: Clean drivers/i2c/ Makefile
5333 Signed-off-by: Michal Simek <monstr@monstr.eu>
5335 commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
5336 Author: Harald Welte <laforge@openmoko.org>
5337 Date: Wed Jul 9 22:30:30 2008 +0800
5339 Add 'license' command to U-Boot command line
5341 The 'license' command includes the U-Boot license (GPLv2) into the
5342 actual bootloader binary. The license text can be shown interactively
5343 at the U-Boot commandline.
5345 For products where the commandline can actually be accessed by the
5346 end user, this helps to prevent inadvertent GPL violations, since the
5347 GPLv2 license text can no longer be 'forgotten' to be included into
5350 The 'license' command can be enabled by CONFIG_CMD_LICENSE.
5352 Signed-off-by: Harald Welte <laforge@openmoko.org>
5354 commit fe2ce5500ebf43d79d227190bd2370232d5b113d
5355 Author: Harald Welte <laforge@gnumonks.org>
5356 Date: Sun Jul 6 15:56:38 2008 +0800
5358 add 'unzip' command to u-boot commandline
5360 [PATCH] add new 'unzip' command to u-boot commandline
5362 common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
5363 memory to memory, and option CONFIG_CMD_UNZIP to enable it
5365 Signed-off-by: Werner Almesberger <werner@openmoko.org>
5366 Signed-off-by: Harald Welte <laforge@openmoko.org>
5368 commit 07efc9e321619c3dec213310c32e011aa6f02783
5369 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5370 Date: Wed Aug 6 19:37:17 2008 -0500
5372 Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
5374 The CFG_ENV_SIZE is not suitable used for SPI flash erase
5375 sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
5376 Add condition check if CFG_ENV_SIZE is larger than
5377 CFG_ENV_SECT_SIZE, calculate the right number of sectors for
5380 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5382 commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
5383 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5384 Date: Mon Aug 11 15:54:25 2008 +0000
5386 ColdFire: Multiple fixes for M5282EVB
5388 Incorrect CFG_HZ value, change 1000000 to 1000.
5389 Rename #waring to #warning. RAMBAR1 uses twice
5390 in start.S, rename the later to FLASHBAR. Insert
5391 nop for DRAM setup. And, env_offset in linker file.
5393 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5395 commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
5396 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5397 Date: Mon Aug 11 15:26:43 2008 +0000
5399 ColdFire: Move m5282evb from board to board/freescale
5401 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5403 commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
5404 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5405 Date: Mon Aug 11 15:25:07 2008 +0000
5407 ColdFire: Move m5272c3 from board to board/freescale
5409 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5411 commit 659e9bad629a480f606b286d5703aef7159edf98
5412 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5413 Date: Mon Aug 11 15:23:16 2008 +0000
5415 ColdFire: Move m5271evb from board to board/freescale
5417 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5419 commit 05316f8ece8206339a208ec052f039cd0f7ca922
5420 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5421 Date: Mon Aug 11 13:41:49 2008 +0000
5423 ColdFire: Add M54451EVB platform support for MCF5445x
5425 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5427 commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
5428 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5429 Date: Wed Aug 6 19:14:08 2008 -0500
5431 ColdFire: Add Serial Flash support for M54455EVB
5433 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5435 commit 9f751551456828b2d0ff417f10959fb0c7110bd0
5436 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5437 Date: Wed Jul 23 20:38:53 2008 -0500
5439 ColdFire: Implement SBF feature for M5445EVB
5441 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5443 commit a7323bba229203aae2604afde131ab47bad4eadc
5444 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5445 Date: Wed Jul 23 17:53:36 2008 -0500
5447 ColdFire: Add SSPI feature for MCF5445x
5449 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5451 commit b2d022d1ac3f59bffa9cec249341e77aea168abc
5452 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5453 Date: Wed Jul 23 17:37:10 2008 -0500
5455 ColdFire: Use CFI Flash driver for M54455EVB
5457 Remove non-common flash driver in
5458 board/freescale/m54455evb/flash.c. The non-cfi flash will
5459 use CONFIG_FLASH_CFI_LEGACY to configure the flash
5462 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5464 commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
5465 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5466 Date: Wed Jul 23 17:11:47 2008 -0500
5468 ColdFire: Add M5253DEMO platform support for MCF5253
5470 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5472 commit 80ba61fd82569af40e04d4a089257b81881884f2
5473 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5474 Date: Wed Aug 6 14:17:09 2008 -0500
5476 ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
5478 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5480 commit d361307e73ce1f6fc68760123f37d4876f851f3e
5481 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5482 Date: Wed Aug 6 14:11:36 2008 -0500
5484 ColdFire: Fix M5253EVB dram bring up issue
5486 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5488 commit 4b0708093e15b412296328bf81325cf9b69fe512
5489 Author: Wolfgang Denk <wd@denx.de>
5490 Date: Thu Aug 14 14:41:06 2008 +0200
5492 Coding Style cleanup, update CHANGELOG
5494 Signed-off-by: Wolfgang Denk <wd@denx.de>
5496 commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
5497 Author: Scott Wood <scottwood@freescale.com>
5498 Date: Wed Aug 13 18:24:05 2008 -0500
5500 socrates: Update NAND driver to new API.
5502 Also, fix some minor formatting issues, and simplify the handling of
5505 Signed-off-by: Scott Wood <scottwood@freescale.com>
5507 commit ba22d10f39eaeedd035e8265616e31ff88e314d5
5508 Author: Scott Wood <scottwood@freescale.com>
5509 Date: Wed Aug 13 18:03:40 2008 -0500
5511 quad100hd: Update NAND driver to new API.
5513 Signed-off-by: Scott Wood <scottwood@freescale.com>
5515 commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
5516 Author: Scott Wood <scottwood@freescale.com>
5517 Date: Wed Aug 13 17:53:48 2008 -0500
5519 m5373evb: Update NAND driver to new API.
5521 Signed-off-by: Scott Wood <scottwood@freescale.com>
5523 commit 1a23a197c8722b805f40895544bbdb1a648c1c82
5524 Author: Scott Wood <scottwood@freescale.com>
5525 Date: Wed Aug 13 17:04:30 2008 -0500
5527 s3c24x0: Update NAND driver to new API.
5529 Signed-off-by: Scott Wood <scottwood@freescale.com>
5531 commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
5532 Author: Scott Wood <scottwood@freescale.com>
5533 Date: Wed Aug 13 15:56:00 2008 -0500
5535 at91: Update board NAND drivers to current API.
5537 Signed-off-by: Scott Wood <scottwood@freescale.com>
5539 commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
5540 Author: Kyungmin Park <kmpark@infradead.org>
5541 Date: Wed Aug 13 09:11:02 2008 +0900
5543 Fix OneNAND build break
5545 Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
5546 - fix bufferram management at erase operation
5547 This patch includes the NAND/OneNAND state filed too.
5549 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5550 Signed-off-by: Scott Wood <scottwood@freescale.com>
5552 commit 9483df6408c25f16060432de3868901e352e23bc
5553 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5554 Date: Wed Aug 13 01:40:43 2008 +0200
5556 drivers/mtd/nand_legacy: Move conditional compilation to Makefile
5558 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5560 commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
5561 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5562 Date: Wed Aug 13 01:40:43 2008 +0200
5564 drivers/mtd/nand: Move conditional compilation to Makefile
5566 rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
5568 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5570 commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
5571 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5572 Date: Wed Aug 13 01:40:42 2008 +0200
5574 drivers/mtd/onenand: Move conditional compilation to Makefile
5576 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5578 commit 00b1883a4cac59d97cd297b1a3a398db85982865
5579 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5580 Date: Wed Aug 13 01:40:42 2008 +0200
5582 drivers/mtd: Move conditional compilation to Makefile
5584 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
5586 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5588 commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
5589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5590 Date: Wed Aug 13 01:40:41 2008 +0200
5592 drivers/qe: Move conditional compilation to Makefile
5594 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5596 commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
5597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5598 Date: Wed Aug 13 01:40:40 2008 +0200
5600 drivers/pci: Move conditional compilation to Makefile
5602 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5604 commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
5605 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5606 Date: Wed Aug 13 01:40:40 2008 +0200
5608 drivers/misc: Move conditional compilation to Makefile
5610 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5612 commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
5613 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5614 Date: Wed Aug 13 01:40:40 2008 +0200
5616 drivers/input: Move conditional compilation to Makefile
5618 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5620 commit 88f57e093114a44aa9a858d52b099bcc52034a8c
5621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5622 Date: Wed Aug 13 01:40:39 2008 +0200
5624 drivers/dma: Move conditional compilation to Makefile
5626 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5628 commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
5629 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5630 Date: Wed Aug 13 01:40:39 2008 +0200
5632 drivers/block: Move conditional compilation to Makefile
5634 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5636 commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
5637 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5638 Date: Wed Aug 13 01:40:39 2008 +0200
5640 serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
5642 move also conditional compilation to Makefile
5644 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5646 commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
5647 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5648 Date: Wed Aug 13 01:40:38 2008 +0200
5650 serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
5652 move also conditional compilation to Makefile
5654 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5656 commit d6e9ee92e890f67594ab150689510df361133ead
5657 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5658 Date: Wed Aug 13 01:40:38 2008 +0200
5660 common: Move conditional compilation to Makefile
5662 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5664 commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
5665 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5666 Date: Wed Aug 13 01:40:09 2008 +0200
5668 mx31: move freescale's mx31 boards to vendor board dir
5670 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5672 commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
5673 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5674 Date: Sat Jul 5 23:11:11 2008 +0200
5676 at91: move arch-at91sam9 to arch-at91
5678 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5680 commit 195ccfc5991d48764b2519941e3507f693851d5d
5681 Author: Fathi BOUDRA <fabo@debian.org>
5682 Date: Wed Aug 6 10:06:20 2008 +0200
5684 OneNAND: Fill in MTD function pointers for OneNAND.
5686 onenand_print_device_info():
5687 - Now returns a string to be placed in mtd->name,
5688 rather than calling printf.
5689 - Remove verbose parameter as it becomes useless.
5691 Signed-off-by: Fathi Boudra <fabo@debian.org>
5692 Signed-off-by: Scott Wood <scottwood@freescale.com>
5694 commit aa646643b6bc250cb3a4966bf728876e0c10d329
5695 Author: Guennadi Liakhovetski <lg@denx.de>
5696 Date: Wed Aug 6 21:42:07 2008 +0200
5698 nand_spl: Support page-aligned read in nand_load, use chipselect
5700 Supporting page-aligned reads doesn't incure any sinificant overhead, just
5701 a small change in the algorithm. Also replace in_8 with readb, since there
5704 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5705 Signed-off-by: Scott Wood <scottwood@freescale.com>
5707 commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
5708 Author: Scott Wood <scottwood@freescale.com>
5709 Date: Tue Aug 5 11:15:59 2008 -0500
5711 NAND boot: Update large page support for current API.
5713 Also, remove the ctrl variable in favor of passing the constants
5714 directly, and remove redundant (u8) casts.
5716 Signed-off-by: Scott Wood <scottwood@freescale.com>
5718 commit e4c09508545d1c45617ba45391c03c03cbc360b9
5719 Author: Scott Wood <scottwood@freescale.com>
5720 Date: Mon Jun 30 14:13:28 2008 -0500
5722 NAND boot: MPC8313ERDB support
5724 Note that with older board revisions, NAND boot may only work after a
5725 power-on reset, and not after a warm reset. I don't have a newer board
5726 to test on; if you have a board with a 33MHz crystal, please let me know
5727 if it works after a warm reset.
5729 Signed-off-by: Scott Wood <scottwood@freescale.com>
5731 commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
5732 Author: Scott Wood <scottwood@freescale.com>
5733 Date: Thu Jun 26 14:06:52 2008 -0500
5735 mpc8313erdb: Enable NAND in config.
5737 Signed-off-by: Scott Wood <scottwood@freescale.com>
5739 commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
5740 Author: Guennadi Liakhovetski <lg@denx.de>
5741 Date: Thu Jul 31 12:38:26 2008 +0200
5743 NAND: Do not write or read a whole block if it is larger than the environment
5745 Environment can be smaller than NAND block size, do not need to read a whole
5746 block and minimum for writing is one page. Also remove an unused variable.
5748 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5749 Signed-off-by: Scott Wood <scottwood@freescale.com>
5751 commit eafcabd15f00c142156235c519fcc55b10993241
5752 Author: Marcel Ziswiler <marcel@ziswiler.com>
5753 Date: Sun Jun 22 16:30:06 2008 +0200
5755 NAND: chip->state does not always get set.
5757 Fixes an issue with chip->state not always being set causing troubles.
5759 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
5760 Signed-off-by: Scott Wood <scottwood@freescale.com>
5762 commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
5763 Author: Ilya Yanok <yanok@emcraft.com>
5764 Date: Mon Jun 30 15:34:40 2008 +0200
5766 NAND: Scan bad blocks lazily.
5768 Rather than scanning on boot, scan upon the first attempt to check the
5769 badness of a block. This speeds up boot when not using NAND, and reduces
5770 the likelihood of needing to reflash via JTAG if NAND becomes
5773 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
5774 Signed-off-by: Scott Wood <scottwood@freescale.com>
5776 commit dfbf617ff055e4216f78d358b0867c548916d14b
5777 Author: Scott Wood <scottwood@freescale.com>
5778 Date: Thu Jun 12 13:20:16 2008 -0500
5782 Implement block-skipping read/write, based on a patch from
5783 Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
5785 Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
5786 Signed-off-by: Scott Wood <scottwood@freescale.com>
5788 commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
5789 Author: Scott Wood <scottwood@freescale.com>
5790 Date: Thu Jun 12 13:13:23 2008 -0500
5792 NAND: Always skip blocks on read/write/boot.
5794 Use of the non-skipping versions was almost always (if not always)
5795 an error, and no valid use case has been identified.
5797 Signed-off-by: Scott Wood <scottwood@freescale.com>
5799 commit e1c3dbada349992875934575c97b328ab2cb33ca
5800 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5801 Date: Thu Jun 12 11:10:21 2008 -0500
5803 nand: fsl_upm: convert to updated MTD NAND infrastructure
5805 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5806 Signed-off-by: Scott Wood <scottwood@freescale.com>
5808 commit 300253306acc72b1b2e9faf0987f86551151d7cf
5809 Author: Scott Wood <scottwood@freescale.com>
5810 Date: Thu May 22 15:02:46 2008 -0500
5812 fsl_elbc_nand: Hard-code the FBAR/FPAR split.
5814 The hardware has separate registers for block and page-within-block,
5815 but the division between the two has no apparent relation to the
5816 actual erase block size of the NAND chip.
5818 Signed-off-by: Scott Wood <scottwood@freescale.com>
5820 commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
5821 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5822 Date: Fri Mar 28 22:10:54 2008 +0300
5824 fsl_elbc_nand: workaround for hangs during nand write
5826 Using current driver elbc sometimes hangs during nand write. Reading back
5827 last byte helps though (thanks to Scott Wood for the idea).
5829 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5830 Signed-off-by: Scott Wood <scottwood@freescale.com>
5832 commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
5833 Author: Scott Wood <scottwood@freescale.com>
5834 Date: Fri Mar 21 16:12:51 2008 -0500
5836 Freescale eLBC FCM NAND driver
5838 This is a driver for the Flash Control Machine of the enhanched Local Bus
5839 Controller found on some Freescale chips (such as the mpc8313 and the
5842 Signed-off-by: Scott Wood <scottwood@freescale.com>
5844 commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
5845 Author: Scott Wood <scottwood@freescale.com>
5846 Date: Tue Mar 18 15:29:14 2008 -0500
5848 Don't panic if a controller driver does ecc its own way.
5850 Some hardware, such as the enhanced local bus controller used on some
5851 mpc83xx chips, does ecc transparently when reading and writing data, rather
5852 than providing a generic calculate/correct mechanism that can be exported to
5855 The subsystem should not BUG() when calculate, correct, or hwctl are
5856 missing, if the methods that call them have been overridden.
5858 Signed-off-by: Scott Wood <scottwood@freescale.com>
5860 commit e52b34d40a8a646e3d11638ea8797e96398dba13
5861 Author: Stefan Roese <sr@denx.de>
5862 Date: Thu Jan 10 18:47:33 2008 +0100
5864 NAND: Make NAND driver less verbose per default
5866 This patch turns off printing of bad blocks per default upon bootup.
5867 This can always be shown via the "nand bad" command later.
5869 Signed-off-by: Stefan Roese <sr@denx.de>
5871 commit fe56a2772e5c59577df906163d0d4b29b056140e
5872 Author: Sergey Kubushyn <ksi@koi8.net>
5873 Date: Wed Jan 9 15:36:20 2008 +0100
5875 NAND: Davinci driver updates
5877 Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
5878 don't have hardware handy so I can not test it at the moment but changes are
5879 rather trivial so it should work. It would be nice if somebody with a
5880 hardware checked it anyways.
5882 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
5884 commit deac913effd8d80535c9ff4687b6fcdff540c554
5885 Author: Stefan Roese <sr@denx.de>
5886 Date: Sat Jan 5 16:50:32 2008 +0100
5888 NAND: Fix compilation warning and small coding style issue
5890 Signed-off-by: Stefan Roese <sr@denx.de>
5892 commit c568f77acdf896fc3dd6413ce53205b17ba809a3
5893 Author: Stefan Roese <sr@denx.de>
5894 Date: Sat Jan 5 16:49:37 2008 +0100
5896 NAND: Update nand_spl driver to match updated nand subsystem
5898 This patch changes the NAND booting driver nand_spl/nand_boot.c to match
5899 the new infrastructure from the updated NAND subsystem. This NAND
5900 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
5903 Signed-off-by: Stefan Roese <sr@denx.de>
5905 commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
5906 Author: Stefan Roese <sr@denx.de>
5907 Date: Sat Jan 5 16:47:58 2008 +0100
5909 NAND: Update 4xx NDFC driver to match updated nand subsystem
5911 This patch changes the 4xx NAND driver ndfc.c to match the new
5912 infrastructure from the updated NAND subsystem. This NAND
5913 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
5916 Tested successfully on AMCC Sequoia and Bamboo.
5918 Signed-off-by: Stefan Roese <sr@denx.de>
5920 commit 12072264528eba33737bc9674e19f0e925ffda23
5921 Author: Stefan Roese <sr@denx.de>
5922 Date: Sat Jan 5 16:43:25 2008 +0100
5924 NAND: Change nand_wait_ready() to not call nand_wait()
5926 This patch changes nand_wait_ready() to not just call nand_wait(),
5927 since this will send a new command to the NAND chip. We just want to
5928 wait for the chip to become ready here.
5930 Signed-off-by: Stefan Roese <sr@denx.de>
5932 commit 9ad754fef5053144daed3b007adaf1c9bec654c9
5933 Author: William Juul <william.juul@datarespons.no>
5934 Date: Fri Dec 14 16:33:45 2007 +0100
5936 make nand dump and nand dump.oob work
5938 Signed-off-by: William Juul <william.juul@tandberg.com>
5939 Signed-off-by: Scott Wood <scottwood@freescale.com>
5941 commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
5942 Author: William Juul <william.juul@datarespons.no>
5943 Date: Mon Nov 19 14:46:00 2007 +0100
5945 moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
5947 Signed-off-by: William Juul <william.juul@tandberg.com>
5949 commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
5950 Author: William Juul <william.juul@tandberg.com>
5951 Date: Tue Jun 10 16:18:13 2008 -0500
5953 Clean out unneeded files
5955 Signed-off-by: William Juul <william.juul@tandberg.com>
5957 commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
5958 Author: William Juul <william.juul@datarespons.no>
5959 Date: Fri Nov 16 08:44:27 2007 +0100
5961 Create symlinks from yaffs2/direct to yaffs2
5963 Signed-off-by: William Juul <william.juul@tandberg.com>
5965 commit 90ef117b68387d66763291af0117677644166611
5966 Author: William Juul <william.juul@datarespons.no>
5967 Date: Thu Nov 15 12:23:57 2007 +0100
5969 Incorporate yaffs2 into U-boot
5971 To use YAFFS2 define CONFIG_YAFFS2
5973 Signed-off-by: William Juul <william.juul@tandberg.com>
5974 Signed-off-by: Scott Wood <scottwood@freescale.com>
5976 commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
5977 Author: William Juul <william.juul@datarespons.no>
5978 Date: Thu Nov 15 11:13:05 2007 +0100
5982 Direct import of yaffs as a tarball as of 20071113 from their public
5983 CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
5985 The code can also be imported on the command line with:
5986 export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
5987 (Hit return when asked for a password)
5990 Signed-off-by: William Juul <william.juul@tandberg.com>
5991 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
5993 commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
5994 Author: William Juul <william.juul@datarespons.no>
5995 Date: Wed Nov 14 14:28:11 2007 +0100
5997 Whitespace cleanup and marking broken code.
5999 Changes requested by maintainer Stefan Roese after
6000 posting patch to U-boot mailing list.
6002 Signed-off-by: William Juul <william.juul@tandberg.com>
6003 Signed-off-by: Scott Wood <scottwood@freescale.com>
6005 commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
6006 Author: William Juul <william.juul@datarespons.no>
6007 Date: Fri Nov 9 13:32:30 2007 +0100
6009 Fixing coding style issues
6011 - Fixing leading white spaces
6012 - Fixing indentation where 4 spaces are used instead of tab
6013 - Removing C++ comments (//), wherever I introduced them
6015 Signed-off-by: William Juul <william.juul@tandberg.com>
6016 Signed-off-by: Scott Wood <scottwood@freescale.com>
6018 commit 4cbb651b29cb64d378a06729970e1e153bb605b1
6019 Author: William Juul <william.juul@datarespons.no>
6020 Date: Thu Nov 8 10:39:53 2007 +0100
6022 Remove white space at end.
6024 Signed-off-by: William Juul <william.juul@tandberg.com>
6025 Signed-off-by: Scott Wood <scottwood@freescale.com>
6027 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
6028 Author: William Juul <william.juul@datarespons.no>
6029 Date: Wed Oct 31 13:53:06 2007 +0100
6031 Update MTD to that of Linux 2.6.22.1
6033 A lot changed in the Linux MTD code, since it was last ported from
6034 Linux to U-Boot. This patch takes U-Boot NAND support to the level
6035 of Linux 2.6.22.1 and will enable support for very large NAND devices
6036 (4KB pages) and ease the compatibility between U-Boot and Linux
6039 This patch is tested on two custom boards with PPC and ARM
6040 processors running YAFFS in U-Boot and Linux using gcc-4.1.2
6043 MAKEALL ppc/arm has some issues:
6044 * DOC/OneNand/nand_spl is not building (I have not tried porting
6045 these parts, and since I do not have any HW and I am not familiar
6046 with this code/HW I think its best left to someone else.)
6048 Except for the issues mentioned above, I have ported all drivers
6049 necessary to run MAKEALL ppc/arm without errors and warnings. Many
6050 drivers were trivial to port, but some were not so trivial. The
6051 following drivers must be examined carefully and maybe rewritten to
6054 cpu/arm926ejs/davinci/nand.c
6056 board/zylonite/nand.c
6058 Signed-off-by: William Juul <william.juul@tandberg.com>
6059 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
6060 Signed-off-by: Scott Wood <scottwood@freescale.com>
6062 commit cd82919e6c8a73b363a26f34b734923844e52d1c
6063 Author: Wolfgang Denk <wd@denx.de>
6064 Date: Tue Aug 12 16:08:38 2008 +0200
6066 Coding style cleanup, update CHANGELOG, prepare release
6068 Signed-off-by: Wolfgang Denk <wd@denx.de>
6070 commit 17e900b8c0f38d922da47073246219dce2a847f2
6071 Author: Wolfgang Denk <wd@denx.de>
6072 Date: Tue Aug 12 14:54:04 2008 +0200
6074 MVBC_P: fix compile problem
6076 Signed-off-by: Wolfgang Denk <wd@denx.de>
6078 commit 52b047ae48219b59bebe37ba743ab103fd4f8316
6079 Author: Wolfgang Denk <wd@denx.de>
6080 Date: Tue Aug 12 12:10:11 2008 +0200
6082 MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
6084 Signed-off-by: Wolfgang Denk <wd@denx.de>
6086 commit c9c101c660b3d1995045c61c7c6041f52b6cf335
6087 Author: Wolfgang Denk <wd@denx.de>
6088 Date: Tue Aug 12 00:36:53 2008 +0200
6090 ads5121: fix compiler warnings (unused variables)
6092 Signed-off-by: Wolfgang Denk <wd@denx.de>
6094 commit 902ca09246039964d59bbcb519b1e1b5aed01308
6095 Author: Kumar Gala <galak@kernel.crashing.org>
6096 Date: Mon Aug 11 11:29:28 2008 -0500
6098 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
6100 Use CONFIG_NUM_CPUS to match existing define used by 86xx.
6102 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6103 Acked-by: Jon Loeliger <jdl@freescale.com>
6105 commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
6106 Author: Kumar Gala <galak@kernel.crashing.org>
6107 Date: Mon Aug 11 09:20:53 2008 -0500
6109 Fix fallout from autostart revert
6111 The autostart revert caused a bit of duplicated code as well as
6112 code that was using images->autostart that needs to get removed so
6115 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6117 commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
6118 Author: Kumar Gala <galak@kernel.crashing.org>
6119 Date: Mon Aug 11 09:16:25 2008 -0500
6121 Fix compile error related to r8a66597-hcd & usb
6123 When building the 8544DS board we get this error:
6125 In file included from r8a66597-hcd.c:22:
6126 u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
6127 make[1]: *** [r8a66597-hcd.o] Error 1
6129 The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
6132 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6134 commit 2d0daa03612338a813e3c9d22680e54eabfea378
6135 Author: Becky Bruce <becky.bruce@freescale.com>
6136 Date: Mon Aug 4 14:02:26 2008 -0500
6138 POWERPC 86xx: Move BAT setup code to C
6140 This is needed because we will be possibly be locating
6141 devices at physical addresses above 32bits, and the asm
6142 preprocessing does not appear to deal with ULL constants
6143 properly. We now call write_bat in lib_ppc/bat_rw.c.
6145 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6146 Acked-by: Jon Loeliger <jdl@freescale.com>
6148 commit 9de67149db576c91b9c2a0a182652331e7e44211
6149 Author: Becky Bruce <becky.bruce@freescale.com>
6150 Date: Mon Aug 4 14:01:53 2008 -0500
6152 POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
6154 Perform sync/isync as required by the architecture.
6156 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6157 Acked-by: Jon Loeliger <jdl@freescale.com>
6159 commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
6160 Author: Becky Bruce <becky.bruce@freescale.com>
6161 Date: Mon Aug 4 14:01:16 2008 -0500
6163 POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
6165 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6166 Acked-by: Jon Loeliger <jdl@freescale.com>
6168 commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
6169 Author: Magnus Lilja <lilja.magnus@gmail.com>
6170 Date: Sun Aug 3 21:44:10 2008 +0200
6172 i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
6174 Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
6175 contacts instead of only the first 256 ones as is the case prior to
6178 Add missing MUX_* macros and update board files to use the new macros.
6180 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
6182 commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
6183 Author: Magnus Lilja <lilja.magnus@gmail.com>
6184 Date: Sun Aug 3 21:43:37 2008 +0200
6186 i.MX31: Fix IOMUX related typos
6188 Correct the names of some IOMUX macros.
6190 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
6192 commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
6193 Author: Steve Sakoman <steve@sakoman.com>
6194 Date: Mon Aug 11 20:26:16 2008 +0200
6196 OneNAND: Remove unused parameters to onenand_verify_page
6198 The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
6200 Signed-off-by: Steve Sakoman <steve@sakoman.com>
6201 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
6203 commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
6204 Author: Anatolij Gustschin <agust@denx.de>
6205 Date: Fri Aug 8 18:00:40 2008 +0200
6207 video: fix bug in cfb_console code
6209 FILL_15BIT_555RGB macro extension for pixel swapping
6210 by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
6211 introduced a bug in cfb_console:
6213 Bitmaps with odd-numbered width won't be rendered
6214 correctly and even U-Boot crashes are observed on
6215 some platforms while repeated rendering of such
6216 bitmaps with "bmp display". Also if a bitmap is
6217 rendered to an odd-numbered x starting position,
6218 the same problem occurs. This patch is an attempt
6221 Signed-off-by: Anatolij Gustschin <agust@denx.de>
6223 commit d9015f6a50d7258125349ef5c2af836458a0029a
6224 Author: Anatolij Gustschin <agust@denx.de>
6225 Date: Fri Aug 8 18:00:39 2008 +0200
6227 video: fix bug in logo_plot
6229 If logo_plot() should ever be called with x starting
6230 position other than zero and for pixel depths greater
6231 than 8bpp, logo colors distortion will be observed.
6232 This patch fixes the issue.
6234 Signed-off-by: Anatolij Gustschin <agust@denx.de>
6236 commit 406819ae94f79f5b59e01d163380ca7d83709251
6237 Author: Wolfgang Denk <wd@denx.de>
6238 Date: Mon Aug 11 00:17:52 2008 +0200
6240 MAINTAINERS: sort entries
6242 Signed-off-by: Wolfgang Denk <wd@denx.de>
6244 commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
6245 Author: Roy Zang <tie-fei.zang@freescale.com>
6246 Date: Thu Aug 7 18:19:28 2008 +0800
6248 Add mpc7448hpc2 maintainer information
6250 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
6252 commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
6253 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
6254 Date: Thu Aug 7 13:13:27 2008 +0530
6256 common/cmd_load.c - Minor code & Coding Style cleanup
6258 - os_data_header Variable is a carry over feature
6259 & unused. So removed all instance of this variable
6260 - Minor Code Style Update
6262 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
6263 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6265 commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
6266 Author: Magnus Lilja <lilja.magnus@gmail.com>
6267 Date: Wed Aug 6 19:32:33 2008 +0200
6269 Update the U-Boot wiki URL.
6271 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
6273 commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
6274 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
6275 Date: Sun Aug 10 17:56:36 2008 +0200
6277 OneNAND: Remove base address offset usage
6279 While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
6280 using OneNAND and some using NAND, we found some differences in OneNAND and
6281 NAND command address handling.
6283 As this might confuse users (it already confused us), we like to align OneNAND
6284 and NAND address handling.
6286 The issue is that cmd_onenand.c subtracts the onenand base address from the
6287 addresses you type into the u-boot command line so, unlike nand, you can't
6288 use addresses relative to the start of the onenand part e.g. this won't work:
6290 onenand read 82000000 280000 400000
6294 onenand read 82000000 20280000 400000
6296 Looking at recent git, the only board currently using OneNAND is Apollon, and
6297 for this the OneNAND base address is 0 (apollon.h)
6299 #define CFG_ONENAND_BASE 0x00000000
6301 so patch below won't break any existing boards and will align OneNAND and NAND
6302 handling on boards where OneNAND base address is != 0.
6304 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
6305 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
6306 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
6308 commit c11528083ef6e55e76df742228c26e39d151813d
6309 Author: Kumar Gala <galak@kernel.crashing.org>
6310 Date: Thu Aug 7 09:28:20 2008 -0500
6312 mpc85xx: workaround old binutils bug
6314 The recent change to move the .bss outside of the image gives older
6315 binutils (ld from eldk4.1/binutils-2.16) some headache:
6317 ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
6318 ppc_85xx-ld: final link failed: Bad value
6320 We workaround it by being explicit about the program headers and not
6321 assigning the .bss to a program header.
6323 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6325 commit 0bf202ec586d4466c900e987720fa635c594d689
6326 Author: Wolfgang Denk <wd@denx.de>
6327 Date: Sun Aug 10 01:26:26 2008 +0200
6329 Revert "[new uImage] Add autostart flag to bootm_headers structure"
6331 This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
6333 The commit was based on a misunderstanding of the (documented)
6334 meaning of the 'autostart' environment variable. It might cause
6335 boards to hang if 'autostart' was used, with the potential to brick
6336 them. Go back to the documented behaviour.
6344 Signed-off-by: Wolfgang Denk <wd@denx.de>
6346 commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
6347 Author: Wolfgang Denk <wd@denx.de>
6348 Date: Sat Aug 9 23:17:32 2008 +0200
6350 TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
6352 - enable CFI driver where this was forgotten
6353 - enable mtdparts support
6354 - adjust default environment
6357 Signed-off-by: Wolfgang Denk <wd@denx.de>
6359 commit 41266c9b5a5f873df3ec891bb0907616958b5602
6360 Author: Peter Tyser <ptyser@xes-inc.com>
6361 Date: Tue Aug 5 10:51:57 2008 -0500
6363 FIT: Fix handling of images without ramdisks
6365 boot_get_ramdisk() should not treat the case when a FIT image does
6366 not contain a ramdisk as an error.
6368 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6369 Acked-by: Michal Simek <monstr@monstr.eu>
6371 commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
6372 Author: Sergey Lapin <slapin@ossfans.org>
6373 Date: Sat Aug 9 01:39:09 2008 +0400
6375 DataFlash: AT45DB021 fix and AT45DB081 support
6377 Fix for page size of AT45DB021. Also adding bigger AT45DB081
6378 which comes with some newer boards.
6380 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
6382 commit ba9324451b662dd393afa53e5cc36fc5d3d10966
6383 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6384 Date: Fri Aug 8 16:30:23 2008 +0900
6386 sh: Update sh7763rdp config
6388 Add sh_eth support to sh7763rdp.
6390 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6392 commit 21f971ec265f6042ec21636d55d06a6bc0751077
6393 Author: Wolfgang Denk <wd@denx.de>
6394 Date: Mon Jul 7 01:22:29 2008 +0200
6396 TQM823L: re-enable logo support; update LCD_INFO text
6398 Signed-off-by: Wolfgang Denk <wd@denx.de>
6400 commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
6401 Author: Wolfgang Denk <wd@denx.de>
6402 Date: Fri Aug 8 16:41:56 2008 +0200
6404 TQM8xxL: fix support for second flash bank
6406 When switching the TQM8xxL modules to use the CFI flash driver,
6407 support for the second flash bank was broken because the CFI driver
6408 did not support dynamically sized banks. This gets fixed now.
6410 Signed-off-by: Wolfgang Denk <wd@denx.de>
6412 commit 2a112b234d879f6390503a5f4e38246acce9d0b0
6413 Author: Wolfgang Denk <wd@denx.de>
6414 Date: Fri Aug 8 16:39:54 2008 +0200
6416 CFI: allow for dynamically determined flash sizes and addresses
6418 The CFI driver allowed only for static initializers in the
6419 CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
6420 several flash banks contiguously if the bank sizes were not known in
6421 advance, which kind of violates U-Boot's design philosophy.
6423 (will be used for example by the TQM8xxL boards)
6425 Signed-off-by: Wolfgang Denk <wd@denx.de>
6427 commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
6428 Author: Ben Warren <biggerbadderben@gmail.com>
6429 Date: Thu Aug 7 23:26:35 2008 -0700
6431 QE UEC: Fix compiler warnings
6433 Moved static functions earlier in file so forward declarations are not needed.
6435 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6437 commit d5d28fe4aad5f4535400647a5617c11039506467
6438 Author: David Saada <David.Saada@ecitele.com>
6439 Date: Mon Mar 31 02:37:38 2008 -0700
6441 QE UEC: Add MII Commands
6443 Add MII commands to the UEC driver. Note that once a UEC device is selected,
6444 any device on its MDIO bus can be addressed.
6446 Signed-off-by: David Saada <david.saada@ecitele.com>
6447 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6449 commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
6450 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6451 Date: Wed Jul 9 21:07:38 2008 +0900
6453 usb: add support for R8A66597 usb controller
6455 add support for Renesas R8A66597 usb controller.
6456 This patch supports USB Host mode.
6458 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6459 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
6461 commit 1d10dcd041aaeae9fd7c821005692898a0303382
6462 Author: Hunter, Jon <jon-hunter@ti.com>
6463 Date: Sat Jul 26 18:59:16 2008 -0500
6465 Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
6467 Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
6469 Signed-off-by: Jon Hunter <jon-hunter@ti.com>
6470 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
6472 commit eab1007334b93a6209f1ec33615e26ef5311ede7
6473 Author: Steven A. Falco <sfalco@harris.com>
6474 Date: Wed Aug 6 15:42:52 2008 -0400
6476 ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
6478 The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
6479 configuration to match the schematic, and also sets the SDR0_PFC1 register to
6480 select the corresponding mode for the UARTs.
6482 Signed-off-by: Steven A. Falco <sfalco@harris.com>
6483 Signed-off-by: Stefan Roese <sr@denx.de>
6485 commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
6486 Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
6487 Date: Wed Aug 6 14:42:13 2008 +0200
6489 avr32: add support for EarthLCD Favr-32 board
6491 This patch adds support for the Favr-32 board made by EarthLCD.
6493 This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
6494 has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
6495 Ethernet, audio out, USB device, SD-card slot, USART and various other
6496 connectors for cennecting stuff to SPI, I2C, GPIO, etc.
6498 Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
6499 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6501 commit bc9019e19758a19a388fb20ef18dc771cd39fdda
6502 Author: Rafael Campos <rafael.campos@hanscan.com>
6503 Date: Thu Jul 31 10:22:20 2008 +0200
6505 cfi-flash: Added support to flash_real_protect for Atmel flash devices
6507 Some of the flash memories produced by ATMEL start in read-only mode.
6508 We need to unprotect it. This patch allows the AT49BV6416 to work with
6509 cfi_flash memories. Tested in the at91rm9200ek board.
6511 Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
6512 Signed-off-by: Stefan Roese <sr@denx.de>
6514 commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
6515 Author: Guennadi Liakhovetski <lg@denx.de>
6516 Date: Tue Aug 5 15:36:39 2008 +0200
6518 cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
6520 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6521 Signed-off-by: Stefan Roese <sr@denx.de>
6523 commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
6524 Author: Stefan Roese <sr@denx.de>
6525 Date: Wed Aug 6 14:06:03 2008 +0200
6529 Signed-off-by: Stefan Roese <sr@denx.de>
6531 commit f2302d4430e7f3f48308d6a585320fe96af8afbd
6532 Author: Stefan Roese <sr@denx.de>
6533 Date: Wed Aug 6 14:05:38 2008 +0200
6537 Signed-off-by: Stefan Roese <sr@denx.de>
6539 commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
6540 Author: Kenneth Johansson <kenneth@southpole.se>
6541 Date: Tue Jul 15 12:13:38 2008 +0200
6543 mpc5121: Move iopin features from board specific to common files.
6545 And in the process eliminate some duplicate register defines.
6547 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
6549 commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
6550 Author: John Rigby <jrigby@freescale.com>
6551 Date: Tue Aug 5 17:38:57 2008 -0600
6553 mpc5121: squash some fdt fixup errors
6555 On ADS5121 when booting linux the following errors are seen:
6556 Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
6557 Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
6558 Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
6560 This is caused by ft_cpu_setup trying to deal with
6561 both old and new soc node naming. This patch
6562 fixes this by being smarter about what to
6565 Also do soc node fixups by compatible instead of by path.
6566 A new board config called OF_SOC_COMPAT defined
6567 to be "fsl,mpc5121-immr" replaces the old
6568 OF_SOC node path that was defined to be "soc@80000000".
6570 Old device trees still work, but the compatiblity
6571 is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
6572 which is on by default in include/configs/ads5121.h.
6574 Signed-off-by: John Rigby <jrigby@freescale.com>
6576 commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
6577 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6578 Date: Sat Aug 2 23:48:30 2008 +0200
6580 drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
6582 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6584 commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
6585 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6586 Date: Sat Aug 2 23:48:32 2008 +0200
6588 nios2/sysid: fix printf warning
6590 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6592 commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
6593 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6594 Date: Sat Aug 2 23:48:33 2008 +0200
6596 Fix remaining build issues with MPC8xx FADS boards.
6598 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6600 commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
6601 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6602 Date: Sat Aug 2 23:48:31 2008 +0200
6604 nios2: fix phys_addr_t and phys_size_t support
6606 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6608 commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
6609 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6610 Date: Sat Aug 2 23:48:34 2008 +0200
6612 mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
6614 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6616 commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
6617 Author: Mark Jackson <mpfj@mimc.co.uk>
6618 Date: Fri Aug 1 09:48:29 2008 +0100
6620 Fix bitmap display for atmel lcd controller
6622 The current lcd_display_bitmap() function does not work properly
6623 for the Atmel LCD controller.
6625 2 fixes need to be done:-
6627 (a) when setting the colour map, use the lcd_setcolreg() function
6628 as provided by the Atmel driver
6629 (b) the data is never actually written to the lcd framebuffer !!
6631 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
6633 commit 2a433c66b1e2770349fe4911be23c375f053ebd8
6634 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6635 Date: Fri Aug 1 08:40:34 2008 +0200
6637 qemu_mips: update README to follow qemu update about default machine
6639 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6641 commit ac169d645f5f0e0b9a232563099209e92a355d8e
6642 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6643 Date: Thu Jul 31 19:53:21 2008 -0500
6645 ColdFire: Fix compilation issue caused by a missing function
6647 Implement usec2ticks() which is used by fsl_i2c.c in
6650 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6652 commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
6653 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6654 Date: Thu Jul 31 19:53:06 2008 -0500
6656 Fix compilation error for TASREG
6658 TASREG is ColdFire platform, the include ppc4xx.h in
6659 board/esd/common/flash.c causes conflict.
6661 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6663 commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
6664 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6665 Date: Thu Jul 31 19:52:36 2008 -0500
6667 Fix compilation error for MCF5275
6669 Rename OBJ to COBJ in board/platform/Makefile
6671 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6673 commit 5c40548f01218360a1f1395198c50ff45f3035b5
6674 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6675 Date: Thu Jul 31 19:52:28 2008 -0500
6677 Fix compile error caused by incorrect function return type
6679 Rename int mii_init(void) to void mii_init(void) for idmr
6682 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6684 commit a58c78067c928976c082c758d3987e89ead5b191
6685 Author: Wolfgang Denk <wd@denx.de>
6686 Date: Fri Aug 1 12:06:22 2008 +0200
6688 Fix build issues with MPC8xx FADS boards.
6690 Signed-off-by: Wolfgang Denk <wd@denx.de>
6692 commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
6693 Author: Wolfgang Denk <wd@denx.de>
6694 Date: Thu Jul 31 17:54:03 2008 +0200
6696 Prepare v1.3.4-rc2: update CHANGELOG
6698 Signed-off-by: Wolfgang Denk <wd@denx.de>
6700 commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
6701 Author: Mark Jackson <mpfj@mimc.co.uk>
6702 Date: Thu Jul 31 16:09:00 2008 +0100
6704 Add gzipped logo support
6706 The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
6708 If this option is set, additionally to standard BMP
6709 images, gzipped BMP images can be displayed via the
6710 splashscreen support or the bmp command.
6712 However, the splashscreen function *only* supports standard BMP images.
6714 This patch adds the documented gzip support.
6716 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
6718 commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
6719 Author: Mark Jackson <mpfj@mimc.co.uk>
6720 Date: Thu Jul 31 15:56:48 2008 +0100
6722 Fix Atmel LCD controller endianess for AVR32 processors
6724 The Atmel lcd controller is used on Atmel's AT91 (little endian) and
6725 AVR32 (big endian) platforms.
6727 As such, the controller can handle both big and little endian memory.
6729 This patch fixes the driver for the AVR32 platform.
6731 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
6733 commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
6734 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6735 Date: Thu Jul 31 15:56:01 2008 +0200
6737 apollon: fix build out of tree
6739 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6741 commit 2e752be39d3e398d4ab89ffa6634c397df298297
6742 Author: Guennadi Liakhovetski <lg@denx.de>
6743 Date: Thu Jul 31 12:35:04 2008 +0200
6745 Uncompressed images loaded to their start address shall set load_end too
6747 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6748 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6750 commit c37207d7f51e19c17f859966f314e27cc1231801
6751 Author: Wolfgang Denk <wd@denx.de>
6752 Date: Wed Jul 16 16:38:59 2008 +0200
6754 Fix printf() format problems with configurable prompts
6756 U-Boot allows for configurable prompt strings using the
6757 CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
6758 the assumption was that any such user defined problts would contain
6759 exactly one "%d" format specifier. But some boards did not.
6761 To allow for flexible boot prompts without adding too complex code we
6762 now allow to specify the whole list of printf() arguments in the user
6763 definition. This is powerful, but requires a responsible user who
6764 really understands what he is doing, as he needs to know for exanple
6765 which variables are available in the respective context.
6767 Signed-off-by: Wolfgang Denk <wd@denx.de>
6769 commit 54754120637b6a7f4ff774fb199fc550bcfea1da
6770 Author: Wolfgang Denk <wd@denx.de>
6771 Date: Thu Jul 31 17:02:14 2008 +0200
6773 TQM85xx: fix typo introduce by commit ffbb5cb9
6775 Signed-off-by: Wolfgang Denk <wd@denx.de>
6777 commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
6778 Author: Wolfgang Denk <wd@denx.de>
6779 Date: Thu Jul 31 15:27:01 2008 +0200
6781 mvbc_p board: fix most build warnings.
6783 Signed-off-by: Wolfgang Denk <wd@denx.de>
6785 commit c4ec6db074051d2f6fc76a66411c60621b22bc02
6786 Author: Wolfgang Denk <wd@denx.de>
6787 Date: Thu Jul 31 13:57:20 2008 +0200
6789 E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
6791 Avoid "integer constant is too large for 'long' type" warnings.
6792 And simplify the code.
6794 Signed-off-by: Wolfgang Denk <wd@denx.de>
6796 commit 9196b44334c330cc13de2464c59181e4db71f549
6797 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
6798 Date: Wed Jul 30 23:21:19 2008 +0400
6800 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
6802 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
6804 commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
6805 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
6806 Date: Wed Jul 30 23:20:32 2008 +0400
6808 PPC: Add pci_clk in the global_data for CPM2 processors
6810 This patch adds pci_clk field to the global_data structure for the
6811 processors which have CPM2 module in case the CONFIG_PCI is defined.
6813 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
6815 commit f0ff885ca64655bee6540eb8a25eed90b1152686
6816 Author: Kumar Gala <galak@kernel.crashing.org>
6817 Date: Wed Jul 30 14:13:30 2008 -0500
6819 mpc85xx: Update linker scripts for Freescale boards
6821 * Move to using absolute addressing always. Makes the scripts a bit more
6823 * Moved .bss after the end of the image. These allows us to have more
6824 room in the resulting binary image for code and data.
6825 * Removed .text object files that aren't really needed
6826 * Make sure _end is 4-byte aligned as the .bss init code expects this.
6827 (Its possible that the end of .bss isn't 4-byte aligned)
6829 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6831 commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
6832 Author: Kumar Gala <galak@kernel.crashing.org>
6833 Date: Wed Jul 30 08:01:15 2008 -0500
6835 Fix compile warnings in dlmalloc
6837 The origional code was using on odd reference to get to the first
6838 real element in av_[]. The first two elements of the array are
6839 not used for actual bins, but for house keeping. If we are more
6840 explicit about how use the first few elements we can get rid of the
6843 dlmalloc.c: In function 'malloc_extend_top':
6844 dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
6845 dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
6846 dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
6849 The logic of how this code came to be is:
6850 bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
6852 SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
6853 bin_at(0) = &(av_[0])
6855 Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
6857 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6859 commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
6860 Author: Stefan Roese <sr@denx.de>
6861 Date: Wed Jul 30 10:21:01 2008 +0200
6863 ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
6865 Signed-off-by: Stefan Roese <sr@denx.de>
6867 commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
6868 Author: Stefan Roese <sr@denx.de>
6869 Date: Wed Jul 30 09:59:51 2008 +0200
6871 cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
6873 A recent patch used '#if (CONFIG_CMD_USB)' instead of
6874 '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
6875 common/bootm.c compile again.
6877 Signed-off-by: Stefan Roese <sr@denx.de>
6878 Acked-by: Markus Klotzbuecher <mk@denx.de>
6880 commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
6881 Author: Kyungmin Park <kmpark@infradead.org>
6882 Date: Tue Jul 22 08:01:43 2008 +0900
6884 Remove unused I2C at apollon board
6886 There are no I2C devices on this board.
6888 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
6890 commit 3c95960e526b3b026da20201db64526f46faf14b
6891 Author: Wolfgang Denk <wd@denx.de>
6892 Date: Thu Jul 31 10:12:09 2008 +0200
6894 at91rm9200dk, csb637: fix NAND related build problems
6896 Tried fixing NAND support for the at91rm9200dk board; untested.
6897 Disabled NAND support in the csb637 board config file.
6899 Signed-off-by: Wolfgang Denk <wd@denx.de>
6901 commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
6902 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6903 Date: Wed Jul 30 12:39:28 2008 +0200
6905 ppc4xx: ML507: Environment in flash and MTD Support
6907 - Relocate the location of U-Boot in the flash
6908 - Save the environment in one sector of the flash memory
6911 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6912 Signed-off-by: Stefan Roese <sr@denx.de>
6914 commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
6915 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6916 Date: Tue Jul 29 17:16:10 2008 +0200
6918 ppc4xx: ML507: Use of get_ram_size in board ml507
6920 - Change suggested by WD
6922 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6923 Signed-off-by: Stefan Roese <sr@denx.de>
6925 commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
6926 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6927 Date: Mon Jul 21 20:30:07 2008 +0200
6929 ppc4xx: ML507: U-Boot in flash and System ACE
6931 This patch allows booting from FLASH the ML507 board by Xilinx.
6932 Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
6934 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6935 Signed-off-by: Stefan Roese <sr@denx.de>
6937 commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
6938 Author: Julien May <mailinglist@miromico.ch>
6939 Date: Mon Jun 23 13:57:52 2008 +0200
6941 Add support for the hammerhead (AVR32) board
6943 The Hammerhead platform is built around a AVR32 32-bit microcontroller
6944 from Atmel. It offers versatile peripherals, such as ethernet, usb
6945 device, usb host etc.
6947 The board also incooperates a power supply and is a Power over Ethernet
6948 (PoE) Powered Device (PD).
6950 Additonally, a Cyclone III FPGA from Altera is integrated on the board.
6951 The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
6952 DDR2 SDRAM interfaces, which will cover even the most exceptional need
6953 of memory bandwidth. Together with the onboard video decoder the board
6954 is ready for video processing.
6956 For more information see: http:///www.miromico.com/hammerhead
6958 Signed-off-by: Julien May <mailinglist@miromico.ch>
6959 [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
6960 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6962 commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
6963 Author: Kumar Gala <galak@kernel.crashing.org>
6964 Date: Tue Jul 29 12:23:49 2008 -0500
6966 fsl_i2c: Use timebase timer functions instead of get_timer()
6968 The current implementation of get_timer() is only really useful after we
6969 have relocated u-boot to memory. The i2c code is used before that as part
6970 of the SPD DDR setup.
6972 We actually have a bug when using the get_timer() code before relocation
6973 because the .bss hasn't been setup and thus we could be reading/writing
6974 a random location (probably in flash).
6976 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6978 commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
6979 Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
6980 Date: Tue Jul 29 14:49:31 2008 +0200
6982 Adder8xx: Fix CFG_MONITOR_LEN
6984 Due to increased space usage, U-Boot can no longer be stored in three sectors.
6985 The current U-Boot use just over three flash sectors (197k), and U-Boot will
6986 become corrupt after saving environment variables. This patch adds another 64k
6989 Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
6991 commit a4c59ad4a21140550ada6f97690d2527c4146ce5
6992 Author: Kyungmin Park <kmpark@infradead.org>
6993 Date: Tue Jul 29 08:47:57 2008 +0900
6995 Add OneNAND IPL related files to gitignore
6997 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
6999 commit 8d87589e8e874df7120a3d9667f051bc33bac250
7000 Author: Rafal Jaworowski <raj@semihalf.com>
7001 Date: Mon Jul 28 20:38:25 2008 +0200
7003 API: Teach the storage layer about SATA and MMC options.
7005 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
7006 Acked-by: Rafal Jaworowski <raj@semihalf.com>
7008 commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
7009 Author: Rafal Jaworowski <raj@semihalf.com>
7010 Date: Mon Jul 28 20:37:48 2008 +0200
7012 API: Dump contents of sector 0 in the demo application.
7014 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
7015 Acked-by: Rafal Jaworowski <raj@semihalf.com>
7017 commit 13ca6305f2eba49c175f6370c35286141059c789
7018 Author: Rafal Jaworowski <raj@semihalf.com>
7019 Date: Mon Jul 28 20:37:10 2008 +0200
7021 API: Correct storage enumeration routine, other minor fixes in API storage area.
7023 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
7024 Acked-by: Rafal Jaworowski <raj@semihalf.com>
7026 commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
7027 Author: Rafal Jaworowski <raj@semihalf.com>
7028 Date: Mon Jul 28 20:36:19 2008 +0200
7030 API: Fix compilation warnings in api_examples/demo.c.
7032 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
7034 commit c14eefcc48212af2f3314809605698dd8393a90a
7035 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7036 Date: Sun Jul 27 17:09:43 2008 +0200
7038 Fix more printf() format warnings
7040 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7042 commit 936897d4d1365452bbbdf8430db5e7769ef08d38
7043 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7044 Date: Fri Jul 25 15:18:16 2008 +0200
7046 Fix remaining CFG_CMD_ define, ifdef and comments
7048 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7050 commit 5d1d00fb36005482e1803a00ddc46efa11d719af
7051 Author: Stefano Babic <sbabic@denx.de>
7052 Date: Fri Jul 25 08:57:40 2008 +0200
7054 Add include for config.h in command.h.
7056 Because the cmd_tbl_s structure depends on the configuration file, it
7057 must be assured that config.h is included before the structure is
7058 evaluated by the compiler. If this is not certain, it could happen
7059 that the compiler generates structures of different size, depending
7060 on the fact if the source file includes <config.h> before or after
7063 The effect is that u-boot crashes when tries to relocate the command
7064 table (for ppc) or try to access to the command table for other
7067 The problem can happen on board-depending commands. All general
7068 commands under /common are unaffected, because they include already
7069 config.h before command.h.
7071 Signed-off-by: Stefano Babic <sbabic@denx.de>
7073 commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
7074 Author: Scott Wood <scottwood@freescale.com>
7075 Date: Wed Jul 23 13:16:06 2008 -0500
7077 NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
7079 This fixes building out-of-tree.
7081 Signed-off-by: Scott Wood <scottwood@freescale.com>
7083 commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
7084 Author: Heiko Schocher <hs@denx.de>
7085 Date: Wed Jul 23 07:30:46 2008 +0200
7087 Fix warnings if compiling with IDE support.
7089 cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
7090 cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
7092 Signed-off-by: Heiko Schocher <hs@denx.de>
7094 commit 7610db17fd4d59c51d825488526d85ede2f06767
7095 Author: Adrian Filipi <adrian.filipi@eurotech.com>
7096 Date: Tue Jul 22 14:28:11 2008 -0400
7098 Removed support for the adsvix board.
7100 Support for the adsvix was originally provided by Applied Data
7101 Systems (ADS), inc., now EuroTech, Inc.
7102 The board never shipped aside from some sample boards.
7104 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
7106 commit f96b44cef897bd372beb86dde1b33637c119d84d
7107 Author: Remy Bohmer <linux@bohmer.net>
7108 Date: Tue Jul 22 16:22:11 2008 +0200
7110 ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
7112 If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
7113 never set, because relocation to RAM is actually never done by U-boot
7114 itself. However, several pieces of code check if this flag is set at
7117 So, to make sure this flag is set on boards skipping relocation, this
7118 is added to the initialisation of U-boot at a moment where it is safe
7121 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7123 commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
7124 Author: Timur Tabi <timur@freescale.com>
7125 Date: Mon Jul 21 14:26:23 2008 -0500
7127 fsl-i2c: fix writes to data segment before relocation
7129 Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
7130 relocation. Commit d8c82db4 added the ability for i2c_init() to program the
7131 I2C bus speed and save the value in i2c_bus_speed[], which is a global
7132 variable. It is an error to write to the data segment before relocation,
7133 which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
7135 Signed-off-by: Timur Tabi <timur@freescale.com>
7137 commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
7138 Author: Wolfgang Ocker <weo@reccoware.de>
7139 Date: Mon Jul 28 16:56:51 2008 +0200
7141 mips: Fix baudrate divisor computation on alchemy cpus
7143 Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
7146 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
7147 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7149 commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
7150 Author: Ben Warren <biggerbadderben@gmail.com>
7151 Date: Sat Jul 5 00:08:48 2008 -0700
7153 Moved initialization of AVR32 Ethernet controllers to board_eth_init()
7155 Renamed initialization functions for atngw100 and atstk1000.
7156 Removed initializations for these boards from net/eth.c
7158 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7159 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7161 commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
7162 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7163 Date: Wed Jul 23 10:55:46 2008 +0200
7165 spi flash: Fix printf() format warnings
7167 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7169 commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
7170 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7171 Date: Wed Jul 23 10:55:31 2008 +0200
7173 atmel_mci: Fix printf() format warnings
7175 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7177 commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
7178 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7179 Date: Wed Jul 23 10:55:15 2008 +0200
7181 avr32: Fix printf() format warnings
7183 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7185 commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
7186 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7187 Date: Wed Jul 23 10:52:19 2008 +0200
7189 avr32: asm/io.h needs asm/types.h
7191 map_physmem() takes a phys_addr_t as parameter. This type is defined in
7192 asm/types.h, so we need to include that file.
7194 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7196 commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
7197 Author: Michal Simek <monstr@monstr.eu>
7198 Date: Thu Jul 17 12:25:46 2008 +0200
7200 microblaze: Fix printf() format issues
7202 Signed-off-by: Michal Simek <monstr@monstr.eu>
7204 commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
7205 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
7206 Date: Thu Jul 17 07:27:51 2008 +0530
7208 Remove unused code from lib_arm/bootm.c
7210 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
7212 commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
7213 Author: Detlev Zundel <dzu@denx.de>
7214 Date: Wed Jul 16 18:56:45 2008 +0200
7216 tqm85xx: Demystify 'DK: !!!' comment
7218 Signed-off-by: Detlev Zundel <dzu@denx.de>
7220 commit b2f44ba570f3a01113bbb745daf46f3858d22f53
7221 Author: Detlev Zundel <dzu@denx.de>
7222 Date: Wed Jul 16 18:56:44 2008 +0200
7224 83xx/85xx/86xx: Add LTEDR local bus definitions
7226 Signed-off-by: Detlev Zundel <dzu@denx.de>
7228 commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
7229 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7230 Date: Wed Jul 16 16:22:32 2008 +0200
7232 serial_xuartlite.c: fix compiler warnings
7234 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7235 Acked-by: Grant Likely <grant.likely@secretlab.ca>
7237 commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
7238 Author: Stefan Roese <sr@denx.de>
7239 Date: Fri Jul 18 11:03:35 2008 +0200
7241 POST: Add disable interrupts in some of the missing CPU POST tests
7243 Some CPU POST tests did not disable the interrupts while running. This
7244 seems to be necessary to protect this self modifying code.
7246 Signed-off-by: Stefan Roese <sr@denx.de>
7248 commit 97a3bf268d096e0e97e54048448c35114edcf557
7249 Author: Stefan Roese <sr@denx.de>
7250 Date: Fri Jul 18 10:43:24 2008 +0200
7252 ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
7254 This is needed for boards that define CFG_64BIT_STRTOUL but don't define
7257 Signed-off-by: Stefan Roese <sr@denx.de>
7259 commit 0043ac55024963295fc79b39af85b6dc3b261e17
7260 Author: Niklaus Giger <niklaus.giger@netstal.com>
7261 Date: Fri Jul 18 11:22:23 2008 +0200
7263 POST PPC4xx/spr IVPR only if PPC440
7265 The SPR IVPR register is only present (as far as I know) for
7266 processors with a PPC440 core.
7268 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7269 Acked-by: Stefan Roese <sr@denx.de>
7271 commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
7272 Author: Stefan Roese <sr@denx.de>
7273 Date: Fri Jul 18 10:42:29 2008 +0200
7275 ppc4xx: Enable 64bit printf format on 440/460 platforms
7277 This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
7278 440/460 platforms. This may be needed since those platforms support
7279 36bit physical address space.
7281 Signed-off-by: Stefan Roese <sr@denx.de>
7283 commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
7284 Author: Stefan Roese <sr@denx.de>
7285 Date: Fri Jul 18 15:57:23 2008 +0200
7287 ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
7289 This patch fixes a problem with incorrect MODTx (On Die Termination)
7290 setup for a configuration with multiple DIMM's and multiple ranks.
7291 Without this change Katmai was unable to boot Linux with DDR2 frequency
7292 >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
7293 with DDR2 frequency = 640MHz and mem=4GB.
7295 Signed-off-by: Stefan Roese <sr@denx.de>
7297 commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
7298 Author: Stefan Roese <sr@denx.de>
7299 Date: Fri Jul 18 12:24:41 2008 +0200
7301 ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
7303 Signed-off-by: Stefan Roese <sr@denx.de>
7305 commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
7306 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7307 Date: Thu Jul 17 12:47:09 2008 +0200
7309 ppc4xx: ML507 Board Support
7311 The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
7313 -Virtex 5 FX FPGA (With a ppc440x5 in it)
7318 -Serial ATA connectors
7319 -RS232 Level Conversors
7320 -Ethernet Transceiver
7322 This patch gives support to a standard design produced by EDK for this
7323 board: ppc440, uartlite, xilinx_int and flash
7325 - Includes Changes propossed by Stefan Roese and Michal Simek
7327 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7328 Acked-by: Stefan Roese <sr@denx.de>
7330 commit d865fd09809a3a18669f35f970781820af40e4de
7331 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7332 Date: Thu Jul 17 11:44:12 2008 +0200
7334 ppc4xx: CPU PPC440x5 on Virtex5 FX
7336 -This patchs gives support for the embbedded ppc440
7337 on the Virtex5 FPGAs
7338 -interrupts.c divided in uic.c and interrupts.c
7339 -xilinx_irq.c for xilinx interrupt controller
7340 -Include modifications propossed by Stefan Roese
7342 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7343 Acked-by: Stefan Roese <sr@denx.de>
7345 commit 340ccb260f21516be360745d5c5e3bd0657698df
7346 Author: Sebastian Siewior <bigeasy@linutronix.de>
7347 Date: Wed Jul 16 20:04:49 2008 +0200
7349 cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
7351 This got broken by commits 93c56f212c
7352 [cfi_flash: support of long cmd in U-boot.]
7354 That command needs to be in little endian format on BE machines
7355 with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
7356 gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
7357 the cmdbuf in case portwidth = chipwidth = 8bit.
7359 Cc: Alexey Korolev <akorolev@infradead.org>
7360 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
7361 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
7363 commit 11188d55bc16dd907451c00282e00a038f73dd62
7364 Author: Stefan Roese <sr@denx.de>
7365 Date: Thu Jul 17 10:40:51 2008 +0200
7367 ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
7369 Signed-off-by: Stefan Roese <sr@denx.de>
7371 commit 021f6df6e96af5b387810cf96d24848da1faa55c
7372 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
7373 Date: Thu Jul 10 17:20:51 2008 +0400
7375 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
7377 The thinko was quite silly indeed, I messed with !ptr. Normally this
7378 would trigger some fault, but in U-Boot NULL pointer is equal to phys
7379 0, so the code was working still, just didn't actually test mpc8315erdb
7380 environment variable value. Heh.
7382 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
7383 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7385 commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
7386 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
7387 Date: Tue Jul 8 21:00:04 2008 +0400
7389 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
7391 Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
7392 support, or without TSEC1 but with USB ULPI PHY support in addition.
7393 With this patch user can specify desired USB PHY.
7395 Also, it seems that we can't distinguish the two boards in software, so
7396 user have to set `mpc8315erdb' environment variable to either 'tsec1'
7397 (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
7398 Linux will not probe for TSEC1.
7400 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
7401 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7403 commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
7404 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
7405 Date: Tue Jul 8 20:59:43 2008 +0400
7407 fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
7409 Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
7410 MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
7411 (connected to the four-ports hub, usb host only).
7413 This patch implements support for passing Dual-Role USB controller's
7414 device tree property phy_type through the usb_phy_type environment
7417 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
7418 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7419 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7421 commit 699f05125509249072a0b865c8d35520d97cd501
7422 Author: Wolfgang Denk <wd@denx.de>
7423 Date: Tue Jul 15 22:22:44 2008 +0200
7425 Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
7427 Signed-off-by: Wolfgang Denk <wd@denx.de>
7429 commit bcab74baa6b1b1c969038ab6f64a186239180405
7430 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7431 Date: Tue Jul 15 11:23:02 2008 -0400
7433 Round the serial port clock divisor value returned by calc_divisor()
7435 Round the serial port clock divisor value returned by
7438 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7439 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7441 commit 0328ef0edfe950f0b7b8b368dae482531506b74a
7442 Author: Robin Getz <rgetz@blackfin.uclinux.org>
7443 Date: Tue Jul 15 21:44:46 2008 +0200
7445 Fix DHCP protocol so U-Boot does not respond too early
7446 on the network with it's offered IP number; it should not reply until
7447 after it has received a DHCP ACK message. Also ensures that U-Boot
7448 does it's DHCPREQUEST as broadcast (per RFC 2131).
7450 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
7451 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7452 Signed-off-by: Wolfgang Denk <wd@denx.de>
7454 commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
7455 Author: Sebastian Siewior <bigeasy@linutronix.de>
7456 Date: Tue Jul 15 13:35:23 2008 +0200
7458 cfi_flash: make the command u32 only
7460 This got changed by commit 93c56f212c
7461 [cfi_flash: support of long cmd in U-boot.]
7463 Long is the wrong type because it will behave differently on 64bit
7464 machines in a way that is probably not expected. u32 should be
7467 Cc: Alexey Korolev <akorolev@infradead.org>
7468 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
7469 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
7471 commit 31cfe57491b183acae575d486729e158f016c27b
7472 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7473 Date: Mon Jul 14 23:48:41 2008 +0200
7475 tools/gitignore: update to all generated files
7477 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7479 commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
7480 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
7481 Date: Wed Jul 9 18:30:44 2008 +0200
7483 mpc5xxx: Add MVBC_P board support
7485 The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
7486 controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
7488 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
7489 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7491 commit e2d31fb3450653115452144363d5bde4e5e3e693
7492 Author: Timur Tabi <timur@freescale.com>
7493 Date: Thu Jun 19 17:56:11 2008 -0500
7495 Update Freescale sys_eeprom.c to handle CCID formats
7497 Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
7498 NXID format replaces the older CCID format, but it's important to support both
7499 since most boards out there still use the CCID format. This change is in
7500 preparation for using one file to handle both formats. This will also unify
7501 EEPROM support for all Freescale 85xx and 86xx boards.
7503 Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
7504 instead of ID_EEPROM_ADDR.
7506 Signed-off-by: Timur Tabi <timur@freescale.com>
7508 commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
7509 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
7510 Date: Fri Jul 11 17:22:43 2008 +0900
7512 pci: sh: Add pci_skip_dev and pci_print_dev function
7514 Add function of new PCI, pci_skip_dev and pci_print_dev.
7516 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
7517 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7519 commit 1107014e835ec9d46c0333f4211d104f77442db0
7520 Author: Andy Fleming <afleming@freescale.com>
7521 Date: Mon Jul 14 20:29:07 2008 -0500
7523 Clean up INIT_RAM options
7525 The L2_INIT_RAM option was unused, and recent changes to the TLB code
7526 meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
7527 the amount of mapped space attached to nothing, we change things so the TLBs
7530 Signed-off-by: Andy Fleming <afleming@freescale.com>
7532 commit 4524561820a9327e89107854b3a7187800ccf719
7533 Author: Andy Fleming <afleming@freescale.com>
7534 Date: Mon Jul 14 20:26:57 2008 -0500
7536 Remove fake flash bank from 8544 DS
7538 The fake flash bank was generating errors for anyone who didn't have a
7539 PromJET hooked up to the board. As that constitutes the vast majority of
7540 users, we remove it.
7542 Signed-off-by: Andy Fleming <afleming@freescale.com>
7544 commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
7545 Author: Kumar Gala <galak@kernel.crashing.org>
7546 Date: Mon Jul 14 14:07:03 2008 -0500
7548 MPC8544DS: Add ATI Video card support
7550 Add support for using a PCIe ATI Video card on PCIe2.
7552 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7554 commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
7555 Author: Kumar Gala <galak@kernel.crashing.org>
7556 Date: Mon Jul 14 14:07:02 2008 -0500
7558 85xx: Add some L1/L2 SPR register definitions
7560 Add new L1/L2 SPRs related to e500mc cache config and control.
7562 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7564 commit e5852787f0c3c442a276262f13d91ca450605ac0
7565 Author: Kumar Gala <galak@kernel.crashing.org>
7566 Date: Mon Jul 14 14:07:01 2008 -0500
7568 MPC8544DS: Report board id, board version and fpga version.
7570 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7572 commit 73f15a060f67a2462551c334215bd20fac6b81d1
7573 Author: Kumar Gala <galak@kernel.crashing.org>
7574 Date: Mon Jul 14 14:07:00 2008 -0500
7576 85xx: Cleanup L2 cache size detection
7578 The L2 size detection code was a bit confusing and we kept having to add
7579 code to it to handle new processors. Change the sense of detection so we
7580 look for the older processors that aren't changing.
7582 Also added support for 1M cache size on 8572.
7584 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7586 commit c3ca7e5e00a24451f20df3bded9a61ba541921df
7587 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7588 Date: Fri Jul 11 15:33:08 2008 -0400
7590 sbc8560: enable CONFIG_OF_LIBFDT by default
7592 Make the default build for the sbc8560 board be powerpc
7593 capable with libfdt support.
7595 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7597 commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
7598 Author: Andy Fleming <afleming@freescale.com>
7599 Date: Mon Jul 14 20:04:40 2008 -0500
7601 Fix indentation for default boot environment variables
7603 This was proposed by Paul Gortmaker in response to Wolfgang's comments on
7604 similar #defines in sbc8560.h.
7606 Signed-off-by: Andy Fleming <afleming@freescale.com>
7608 commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
7609 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7610 Date: Fri Jul 11 15:33:07 2008 -0400
7612 sbc8560: add default fdt values
7614 Add in the default fdt settings and the typical EXTRA_ENV
7615 settings as borrowed from the mpc8560ads. Fix a couple
7616 of stale references to the mpc8560ads dating back to the
7617 original clone/fork.
7619 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7620 Signed-off-by: Andy Fleming <afleming@freescale.com>
7622 commit d04e76edf92f7f89696989e8702b97e020455af3
7623 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7624 Date: Fri Jul 11 15:33:06 2008 -0400
7626 sbc8560: add in ft_board_setup()
7628 Add in for the sbc8560, the ft_board_setup() routine, based on what is
7629 in use for the Freescale MPC8560ADS board.
7631 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7633 commit c158bcaca3b31cbe38c4143812e6170e38a57393
7634 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7635 Date: Fri Jul 11 15:33:05 2008 -0400
7637 sbc8560: define eth0 and eth1 instead of eth1 and eth2
7639 The existing config doesn't define CONFIG_HAS_ETH0, and so the
7640 fdt support doesn't update the zeros in the dtb local-mac with
7641 real data from the u-boot env. Since the existing config is
7642 tailored to just two interfaces, get rid of the ETH2 definitions
7645 Also don't include any end user specific data into the environment
7646 by default -- things like MAC address, network parameters etc. need
7647 to come from the end user.
7649 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7650 Signed-off-by: Andy Fleming <afleming@freescale.com>
7652 commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
7653 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7654 Date: Fri Jul 11 15:33:04 2008 -0400
7656 sbc8560: properly set cs0_bnds for 512MB
7658 The sbc8560 board ships with 512MB of memory installed,
7659 but the current cs0_bnds is hard coded for 256MB. Set the
7660 value based on CFG_SDRAM_SIZE.
7662 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7664 commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
7665 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7666 Date: Fri Jul 11 15:33:03 2008 -0400
7668 sbc8560: proper definitions for TSEC.
7670 The definitions for the TSEC have become out of date. There is no
7671 longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
7672 Update to match those of other boards, like the MPC8560ADS.
7674 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7675 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7677 commit 71074abbe0c76429577aff58aeff0a24ad210b23
7678 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7679 Date: Wed Jul 9 13:23:05 2008 -0400
7681 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
7683 Some boards that have external 16550 UARTs don't have a direct
7684 tie between bi_busfreq and the clock used for the UARTs. Boards
7685 that do have such a tie should set CFG_NS16550_CLK to be
7686 get_bus_freq(0) -- which most of them do already.
7688 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7689 Acked-by: Kim Phillips <kim.phillips@freescale.com>
7691 commit 24ef76f320fbadf074105229826514db140f939f
7692 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
7693 Date: Wed Jul 2 07:03:53 2008 -0700
7695 Change the temp map to ROM to align addresses to page size.
7697 With a page size of BOOKE_PAGESZ_16M, both the real and effective
7698 addresses must be multiples of 16MB. The hardware silently truncates
7699 them so the code happens to work. This patch clarifies the situation
7700 by establishing addresses that the hardware doesn't need to truncate.
7702 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
7703 Signed-off-by: Andy Fleming <afleming@freescale.com>
7705 commit 06b4186c10204b6683edb047ac5f506fb0ce0937
7706 Author: Kim Phillips <kim.phillips@freescale.com>
7707 Date: Tue Jun 17 17:45:22 2008 -0500
7709 mpc85xx: use IS_E_PROCESSOR macro
7711 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7713 commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
7714 Author: Kim Phillips <kim.phillips@freescale.com>
7715 Date: Mon Jun 16 15:55:53 2008 -0500
7717 fdt: add crypto node handling for MPC8{3, 5}xxE processors
7719 Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
7720 check rev and up-rev crypto node (to SEC rev. 2.4 property values)
7721 if on an 'EA' processor, e.g. MPC8349EA.
7723 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7725 commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
7726 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7727 Date: Fri Jul 11 15:10:11 2008 -0400
7729 ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
7731 ARM DaVinci: Remove extern phy_t declaration by moving
7732 code to proper place.
7734 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7736 commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
7737 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7738 Date: Fri Jul 11 15:10:10 2008 -0400
7740 ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
7742 ARM DaVinci: Remove duplicate definitions of MACH_TYPE
7743 and prototype of i2c_init().
7745 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7747 commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
7748 Author: Kumar Gala <galak@kernel.crashing.org>
7749 Date: Mon Jul 14 14:03:02 2008 -0500
7751 Fix some more printf() format problems.
7753 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7755 commit 45b16d22c64674ccd8c4637456a987463609141c
7756 Author: Wolfgang Denk <wd@denx.de>
7757 Date: Mon Jul 14 22:38:42 2008 +0200
7759 Fix coding style; make code better parsable by external tools
7761 Signed-off-by: Wolfgang Denk <wd@denx.de>
7763 commit b880cbf207b1c109d3a661417a8feddcbd729a9d
7764 Author: Wolfgang Denk <wd@denx.de>
7765 Date: Mon Jul 14 21:19:08 2008 +0200
7767 cpu/i386/serial.c: Fix syntax errors
7769 Signed-off-by: Wolfgang Denk <wd@denx.de>
7771 commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
7772 Author: Wolfgang Denk <wd@denx.de>
7773 Date: Mon Jul 14 20:41:35 2008 +0200
7775 elppc board: Coding style cleanup.
7777 Signed-off-by: Wolfgang Denk <wd@denx.de>
7779 commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
7780 Author: Wolfgang Denk <wd@denx.de>
7781 Date: Mon Jul 14 20:40:22 2008 +0200
7783 elppc board: fix syntax error.
7785 Signed-off-by: Wolfgang Denk <wd@denx.de>
7787 commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
7788 Author: Wolfgang Denk <wd@denx.de>
7789 Date: Mon Jul 14 20:38:26 2008 +0200
7791 EB+MCF-EV123 board: fix coding style (alingment)
7793 Signed-off-by: Wolfgang Denk <wd@denx.de>
7795 commit 6841785a0bb0f38175456a923edd634fb7dd6947
7796 Author: Wolfgang Denk <wd@denx.de>
7797 Date: Mon Jul 14 20:36:44 2008 +0200
7799 EB+MCF-EV123 board: fix syntx error
7801 Signed-off-by: Wolfgang Denk <wd@denx.de>
7803 commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
7804 Author: Andy Fleming <afleming@freescale.com>
7805 Date: Mon Jul 7 18:02:08 2008 -0500
7807 Remove LBC_CACHE_BASE from 8544 DS
7809 The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
7810 space for some anyway, we were allowing speculative loads into unmapped space,
7811 which would cause an exception (annoying, even if ultimately harmless).
7812 Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
7815 Signed-off-by: Andy Fleming <afleming@freescale.com>
7817 commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
7818 Author: Wolfgang Denk <wd@denx.de>
7819 Date: Mon Jul 14 15:19:07 2008 +0200
7821 Code cleanup: fix old style assignment ambiguities like "=-" etc.
7823 Signed-off-by: Wolfgang Denk <wd@denx.de>
7825 commit d7854223c5c85b5849fbf422cc8ac0efef461c37
7826 Author: Wolfgang Denk <wd@denx.de>
7827 Date: Mon Jul 14 15:10:53 2008 +0200
7829 AmigaOneG3SE: remove dead and incomplete files
7831 Signed-off-by: Wolfgang Denk <wd@denx.de>
7833 commit b64f190b7a34224df09b559ca111eb1b733f00ad
7834 Author: Wolfgang Denk <wd@denx.de>
7835 Date: Mon Jul 14 15:06:35 2008 +0200
7837 Fix printf() format issues with sizeof_t types by using %zu
7839 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7840 Signed-off-by: Wolfgang Denk <wd@denx.de>
7842 commit f354b73e16a86f9e9085471a830605f74f84ea5d
7843 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7844 Date: Mon Jul 14 14:11:45 2008 +0200
7846 vsprintf: add z and t options
7848 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7850 commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
7851 Author: Wolfgang Denk <wd@denx.de>
7852 Date: Sun Jul 13 23:07:35 2008 +0200
7854 Fix some more printf() format issues.
7856 Signed-off-by: Wolfgang Denk <wd@denx.de>
7858 commit d5996dd555edf52721b7691a4c59de016251ed39
7859 Author: Wolfgang Denk <wd@denx.de>
7860 Date: Sun Jul 13 19:51:00 2008 +0200
7862 Fix some more printf() format problems.
7864 Signed-off-by: Wolfgang Denk <wd@denx.de>
7866 commit 0f9d5f6d6e814907794995c6a22af752040c35d9
7867 Author: Wolfgang Denk <wd@denx.de>
7868 Date: Sun Jul 13 19:48:26 2008 +0200
7870 ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
7872 Signed-off-by: Wolfgang Denk <wd@denx.de>
7874 commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
7875 Author: Anatolij Gustschin <agust@denx.de>
7876 Date: Sat Jul 12 17:31:36 2008 +0200
7878 Fix bug in Lime video driver
7880 We need to wait while drawing engine clears frame
7881 buffer before any further software accesses to frame
7882 buffer will be initiated. Otherwise software drawn
7883 parts could be partially destroyed by the drawing
7884 engine or even GDC chip freeze could occur (as
7885 observed on socrates board).
7887 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7889 commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
7890 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7891 Date: Sat Jul 12 14:36:34 2008 +0200
7893 Fix some more printf() format issues.
7895 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7897 commit 18c8a28aad49803780bd8d52432ded528e37e701
7898 Author: Michal Simek <monstr@monstr.eu>
7899 Date: Fri Jul 11 15:11:57 2008 +0200
7901 hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
7903 Signed-off-by: Michal Simek <monstr@monstr.eu>
7904 Acked-by: Stefan Roese <sr@denx.de>
7906 commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
7907 Author: Michal Simek <monstr@monstr.eu>
7908 Date: Fri Jul 11 11:50:53 2008 +0200
7910 hwmon: Cleaning hwmon devices
7913 Move device specific values to driver for better reading
7915 Signed-off-by: Michal Simek <monstr@monstr.eu>
7916 Acked-by: Stefan Roese <sr@denx.de>
7918 commit c78fce699c7ff467ecd841da6a79f065180bf578
7919 Author: Michal Simek <monstr@monstr.eu>
7920 Date: Fri Jul 11 10:43:13 2008 +0200
7922 FIS: repare incorrect return value with ramdisk handling
7924 Microblaze and PowerPC use boot_get_ramdisk for loading
7925 ramdisk to memory with checking return value.
7926 Return 0 means success. Return 1 means failed.
7927 Here is correspond part of code from bootm.c which check
7930 ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
7931 &rd_data_start, &rd_data_end);
7935 Signed-off-by: Michal Simek <monstr@monstr.eu>
7937 commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
7938 Author: Michal Simek <monstr@monstr.eu>
7939 Date: Fri Jul 11 10:10:32 2008 +0200
7941 microblaze: Remove useless ancient headers
7943 Signed-off-by: Michal Simek <monstr@monstr.eu>
7945 commit 53ea981c3124b13c137c2d10e975b7c6672266e0
7946 Author: Michal Simek <monstr@monstr.eu>
7947 Date: Fri Jul 11 10:10:31 2008 +0200
7949 microblaze: Clean uartlite driver
7951 Redesign uartlite driver to in_be32 and out_be32 macros
7952 Fix missing header in io.h
7954 Signed-off-by: Michal Simek <monstr@monstr.eu>
7955 Acked-by: Grant Likely <grant.likely@secretlab.ca>
7957 commit dbf3dfb386a2d5d2381814e39985ab2e21894550
7958 Author: Marcel Ziswiler <marcel@ziswiler.com>
7959 Date: Fri Jul 11 02:39:14 2008 +0200
7961 Enable passing of ATAGs required by latest Linux kernel.
7963 commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
7964 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7965 Date: Fri Jul 11 10:24:15 2008 -0400
7967 Fix integer overflow warning in calc_divisor()
7969 which happened when rounding the serial port clock divisor
7971 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7973 commit 6b760189d77f001684e3160b355c185ca3804961
7974 Author: Marcel Ziswiler <marcel@ziswiler.com>
7975 Date: Fri Jul 11 01:09:59 2008 +0200
7977 Fix build time warnings in function mmc_decode_csd()
7979 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
7981 commit c15947d6ce0d59925c97fdfac692476af6e262d0
7982 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7983 Date: Thu Jul 10 10:46:33 2008 -0400
7985 ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
7987 caused by missing dcache status/enable/disable functions.
7989 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7991 commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
7992 Author: Stefan Roese <sr@denx.de>
7993 Date: Thu Jul 10 13:53:31 2008 +0200
7995 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
7997 This patch removes some ft_board_setup() functions from some 4xx boards.
7998 This can be done since we now have a default weak implementation for this
7999 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
8000 implementation like canyonlands need their own version.
8002 Signed-off-by: Stefan Roese <sr@denx.de>
8004 commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
8005 Author: Wolfgang Denk <wd@denx.de>
8006 Date: Sun Jul 13 14:58:16 2008 +0200
8008 Add last known maintainer for orphaned boards; reformat.
8010 Signed-off-by: Wolfgang Denk <wd@denx.de>
8012 commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
8013 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8014 Date: Thu Jul 10 13:16:04 2008 +0200
8016 Remove kharris@nexus-tech.net from MAINTAINERS
8018 Mail to kharris@nexus-tech.net bounces because the user doesn't exist
8019 anymore. You can't be a maintainer without a valid e-mail address, so
8020 move all boards that used to be maintained by Kyle Harris to the
8023 Currently, only PowerPC has a list of orphaned boards, so this patch
8024 creates one for ARM as well.
8026 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8028 commit 17bd17071463b0cde391ac4a0863d600474b4ea1
8029 Author: Anatolij Gustschin <agust@denx.de>
8030 Date: Thu Jul 10 01:15:10 2008 +0200
8032 at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
8034 On the at91sam9260ep development board there is an EEPROM
8035 connected to the TWI interface (PA23, PA24 Peripheral A
8036 multiplexing), so we cannot use these pins as ETX2, ETX3.
8037 This patch configures PA10, PA11 pins for ETX2, ETX3
8038 instead of PA23, PA24 pins.
8040 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8041 Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
8043 commit f889265753ddf4465d9d580827bb9289bfac55d6
8044 Author: Kenneth Johansson <kenneth@southpole.se>
8045 Date: Sat Jul 12 13:18:34 2008 -0600
8047 fix DIU for small screens
8049 The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
8050 so it was not possible to set a slow pixel clock and thus prevented
8051 display on small screens.
8053 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
8054 Acked-by: John Rigby <jrigby@freescale.com>
8056 commit b60b8573875e650e4c69be667bfc88d3ed474a7c
8057 Author: John Rigby <jrigby@freescale.com>
8058 Date: Fri Jul 11 14:44:09 2008 -0600
8060 ADS5121 cleanup compile warnings
8062 board/ads5121/iopin.c
8063 Replace bit fields in struct iopin_t with a single
8064 field and intialize it via plain old macros.
8065 This fixes the type pun warnings and makes the code
8068 board/ads5121/ads5121.c
8069 Add include iopin.h to ads5121.c for the iopin_initialize
8072 Add an extern void ads5121_diu_init(void)
8074 Signed-off-by: John Rigby <jrigby@freescale.com>
8076 commit bde63587622c4b830a27d1ddf7265843de9e994f
8077 Author: Wolfgang Denk <wd@denx.de>
8078 Date: Fri Jul 11 22:56:11 2008 +0200
8080 Fix some more printf() format issues.
8082 Signed-off-by: Wolfgang Denk <wd@denx.de>
8084 commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
8085 Author: Wolfgang Denk <wd@denx.de>
8086 Date: Fri Jul 11 22:55:31 2008 +0200
8088 Fixed some out-of-tree build issues
8090 Signed-off-by: Wolfgang Denk <wd@denx.de>
8092 commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
8093 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8094 Date: Wed Jul 9 16:20:23 2008 -0500
8096 ColdFire: Fix FB CS not setup properly for Mcf5282
8098 Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
8099 CFG_CSn_RO is defined as 0, the chipselect will not
8102 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8104 commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
8105 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8106 Date: Wed Jul 9 15:47:27 2008 -0500
8108 ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
8110 Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
8111 clock module in cpu/<cf arch>/cpu_init.c
8113 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8115 commit f94945b517f10e01927101679c62361e03d4e837
8116 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8117 Date: Wed Jul 9 15:25:01 2008 -0500
8119 ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
8121 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8123 commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
8124 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8125 Date: Wed Jul 9 15:21:44 2008 -0500
8127 Fix compile error caused by missing timer function
8129 Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
8131 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8133 commit c37ea031175b807c54e6bad9b270e9bede6c0078
8134 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8135 Date: Wed Jul 9 15:14:25 2008 -0500
8137 Fix compile error caused by incorrect function return type
8139 Rename int mii_init(void) to void mii_init(void)
8141 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8143 commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
8144 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8145 Date: Wed Jun 18 19:27:23 2008 -0500
8147 ColdFire: Fix power up issue for MCF5235
8149 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8151 commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
8152 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8153 Date: Wed Jun 18 19:19:07 2008 -0500
8155 ColdFire: Fix compiling error for MCF5275
8157 The compiling error was caused by missing a closed parentheses
8160 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8162 commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
8163 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8164 Date: Wed Jun 18 19:14:01 2008 -0500
8166 ColdFire: Fix timer issue for MCF5272
8168 The timer was assigned to wrong timer memory mapped which
8169 caused udelay() and timer() not working properly.
8171 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8173 commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
8174 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8175 Date: Wed Jun 18 19:12:13 2008 -0500
8177 ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
8179 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
8181 commit 8371dc2066136be21e10b7b9293e469297d77298
8182 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8183 Date: Wed Jun 18 19:05:23 2008 -0500
8185 ColdFire: Add -got=single param for new linux v4e toolchains
8187 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
8189 commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
8190 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8191 Date: Wed Jun 18 13:21:19 2008 -0500
8193 ColdFire: Fix code flash configuration for M547x/M548x boards
8195 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
8197 commit 6e37091afc07fdcc15590093fd066b0cb7399f85
8198 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8199 Date: Tue Jun 24 12:12:16 2008 -0500
8201 ColdFire: Fix warning messages by passing correct data type in board.c
8203 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8205 commit 81cc32322acb1b3225ee45606ced48e2a14824dc
8206 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8207 Date: Thu May 29 12:21:54 2008 -0500
8209 ColdFire: Fix UART baudrate formula
8211 The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
8212 can generate the wrong divisor due to integer division truncation.
8213 Round the calculated divisor value by adding 1/2 the baudrate
8214 before dividing by the baudrate.
8216 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8217 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
8219 commit b578fb471444cbd7db1285701ba51343baaf73fb
8220 Author: Stefan Roese <sr@denx.de>
8221 Date: Thu Jul 10 11:38:26 2008 +0200
8223 ppc4xx: Fix include sequence in 4xx_pcie.c
8225 This patch now moves common.h to the top of the inlcude list. This
8226 is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
8227 the phys_size_t/phys_addr_t are defined to the correct size in this
8230 Signed-off-by: Stefan Roese <sr@denx.de>
8232 commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
8233 Author: Stefan Roese <sr@denx.de>
8234 Date: Fri Jul 11 13:10:56 2008 +0200
8236 ppc4xx: Fix compile warning in 44x_spd_ddr2.c
8238 Signed-off-by: Stefan Roese <sr@denx.de>
8240 commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
8241 Author: Stefan Roese <sr@denx.de>
8242 Date: Fri Jul 11 11:40:13 2008 +0200
8244 ppc4xx: Fix small korat merge problem
8246 Signed-off-by: Stefan Roese <sr@denx.de>
8248 commit 1d0554736a0a1dd59718acda660871ce56b69e18
8249 Author: Stefan Roese <sr@denx.de>
8250 Date: Fri Jul 11 11:34:52 2008 +0200
8252 ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
8254 Signed-off-by: Stefan Roese <sr@denx.de>
8256 commit 3a82113ed5934d498f25080441a8261fc9454b15
8257 Author: Stefan Roese <sr@denx.de>
8258 Date: Thu Jul 10 16:37:09 2008 +0200
8260 ppc4xx: Add 460SX UIC defines
8262 Only the really needed ones are added (cascading and EMAC/MAL).
8264 Signed-off-by: Stefan Roese <sr@denx.de>
8266 commit 26173fc6f60521c2a8072f652f863617fc11ba9a
8267 Author: Stefan Roese <sr@denx.de>
8268 Date: Mon Jun 30 14:11:07 2008 +0200
8270 ppc4xx: Continue cleanup of ppc440.h
8272 This patch continues the ppc440.h cleanup by removing some of the unused
8275 Signed-off-by: Stefan Roese <sr@denx.de>
8277 commit d9056b7913ed6a228d2f33671d916efedee541dd
8278 Author: Stefan Roese <sr@denx.de>
8279 Date: Mon Jun 30 14:05:05 2008 +0200
8281 ppc4xx: Cleanup Katmai & Yucca PCIe register usage
8283 This patch cleans up the 440SPe PCIe register usage. Now only defines
8284 from the include/asm-ppc/4xx_pcie.h are used.
8286 Signed-off-by: Stefan Roese <sr@denx.de>
8288 commit 5de851403b01489b493fa83137ad990b8ce60d1c
8289 Author: Stefan Roese <sr@denx.de>
8290 Date: Thu Jun 26 17:36:39 2008 +0200
8292 ppc4xx: Rework 440GX UIC handling
8294 This patch reworks the 440GX interrupt handling so that the common 4xx
8295 code can be used. The 440GX is an exception to all other 4xx variants
8296 by having the cascading interrupt vectors not on UIC0 but on a special
8297 UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
8298 the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
8299 handling is simpler without any 440GX special cases.
8301 Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
8303 Signed-off-by: Stefan Roese <sr@denx.de>
8305 commit d1631fe1a05b063ccaf62ea892a8887b829847d1
8306 Author: Stefan Roese <sr@denx.de>
8307 Date: Thu Jun 26 13:40:57 2008 +0200
8309 ppc4xx: Consolidate PPC4xx UIC defines
8311 This 2nd patch now removes all UIC mask bit definition. They should be
8312 generated from the vectors by using the UIC_MASK() macro from now on.
8313 This way only the vectors need to get defined for new PPC's.
8315 Also only the really used interrupt vectors are now defined. This makes
8316 definitions for new PPC versions easier and less error prone.
8318 Another part of this patch is that the 4xx emac driver got a little
8319 cleanup, since now the usage of the interrupts is clearer.
8321 Signed-off-by: Stefan Roese <sr@denx.de>
8323 commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
8324 Author: Stefan Roese <sr@denx.de>
8325 Date: Wed Jun 25 10:59:22 2008 +0200
8327 ppc4xx: Consolidate PPC4xx UIC defines
8329 This patch is the first step to consolidate the UIC related defines in the
8330 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
8331 asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
8334 Signed-off-by: Stefan Roese <sr@denx.de>
8336 commit 7ee2619c20ccecd57966d74d844e6329e141261c
8337 Author: Stefan Roese <sr@denx.de>
8338 Date: Tue Jun 24 17:18:50 2008 +0200
8340 ppc4xx: Consolidate PPC4xx EBC defines
8342 This patch removes all EBC related defines from the PPC4xx headers
8343 ppc405.h and ppc440.h and introduces a new header
8345 include/asm-ppc/ppc4xx-ebc.h
8347 with all those defines.
8349 Signed-off-by: Stefan Roese <sr@denx.de>
8351 commit e321801bed5a6d896d298c00fd20046f039d5d66
8352 Author: Stefan Roese <sr@denx.de>
8353 Date: Thu Jul 10 13:52:44 2008 +0200
8355 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
8357 This patch removes some ft_board_setup() functions from some 4xx boards.
8358 This can be done since we now have a default weak implementation for this
8359 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
8360 implementation like canyonlands need their own version.
8362 Signed-off-by: Stefan Roese <sr@denx.de>
8364 commit 08250eb2edbd96514d049602d9e134110ac3185f
8365 Author: Stefan Roese <sr@denx.de>
8366 Date: Thu Jul 10 15:32:32 2008 +0200
8368 ppc4xx: Fix merge problems in 44x_spd_ddr2.c
8370 Signed-off-by: Stefan Roese <sr@denx.de>
8372 commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
8373 Author: Grant Erickson <gerickson@nuovations.com>
8374 Date: Tue Jul 8 08:35:00 2008 -0700
8376 ppc4xx: Add MII mode support to the EMAC RGMII Bridge
8378 This patch adds support for placing the RGMII bridge on the
8379 PPC405EX(r) into MII/GMII mode and allows a board-specific
8380 configuration to specify the bridge mode at compile-time.
8382 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8383 Signed-off-by: Stefan Roese <sr@denx.de>
8385 commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
8386 Author: Grant Erickson <gerickson@nuovations.com>
8387 Date: Wed Jul 9 16:46:35 2008 -0700
8389 ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
8391 This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
8392 controller registers (MODT and INITPLR) used by the
8393 PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
8394 peer values used for the INITPLR MR and EMR registers,
8395 respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
8397 With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
8398 Kilauea are replaced by equivalent mnemonics to make it easier to
8399 compare and contrast other 405EX(r)-based boards (e.g. during board
8402 Finally, unified the SDRAM controller register dump routine such that
8403 it can be used across all processor variants that utilize the IBM DDR2
8404 SDRAM controller core. It produces output of the form:
8406 PPC4xx IBM DDR2 Register Dump:
8408 SDRAM_MB0CF[40] = 0x00006701
8411 which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
8412 since it is not uncommon that the DCR values in header files get mixed
8413 up and it helps to validate, at a glance, they match what is printed
8417 AMCC Kilauea/Haleakala:
8418 - NFS Linux Boot: PASSED
8419 - NAND Linux Boot: PASSED
8421 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8422 Signed-off-by: Stefan Roese <sr@denx.de>
8424 commit ad7382d828982e9c1bafc4313ef1b666f6145f58
8425 Author: Grant Erickson <gerickson@nuovations.com>
8426 Date: Wed Jul 9 16:31:59 2008 -0700
8428 ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
8430 Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
8431 revision ID DCR based on 405EX, and add field mnemonics for bus error
8432 status and ECC error status registers.
8434 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8435 Signed-off-by: Stefan Roese <sr@denx.de>
8437 commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
8438 Author: Grant Erickson <gerickson@nuovations.com>
8439 Date: Wed Jul 9 16:31:36 2008 -0700
8441 ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
8443 This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
8445 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8446 Signed-off-by: Stefan Roese <sr@denx.de>
8448 commit 5b457d00730d4aa0c6450d21a9104723e606fb98
8449 Author: Grant Erickson <gerickson@nuovations.com>
8450 Date: Wed Jul 9 11:55:46 2008 -0700
8452 PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
8454 While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
8455 controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
8456 the 405EX(r), SDRAM_MCSTAT has a different DCR value.
8458 Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
8459 which causes SDRAM initialization to periodically fail since it can
8460 prematurely indicate SDRAM ready status.
8462 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8463 Signed-off-by: Stefan Roese <sr@denx.de>
8465 commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
8466 Author: Feng Kan <fkan@amcc.com>
8467 Date: Tue Jul 8 22:48:42 2008 -0700
8469 ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
8471 Add AMCC Redwood reference board that uses the latest
8472 PPC 464 CPU processor combined with a rich mix of peripheral
8473 controllers. The board will support PCIe, mutiple Gig ethernet
8474 ports, advanced hardware RAID assistance and IEEE 1588.
8476 Signed-off-by: Feng Kan <fkan@amcc.com>
8477 Signed-off-by: Stefan Roese <sr@denx.de>
8479 commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
8480 Author: Feng Kan <fkan@amcc.com>
8481 Date: Tue Jul 8 22:48:07 2008 -0700
8483 ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
8485 Signed-off-by: Feng Kan <fkan@amcc.com>
8486 Signed-off-by: Stefan Roese <sr@denx.de>
8488 commit 7d30793685efcada183891c78fc892e6c9ba50c7
8489 Author: Feng Kan <fkan@amcc.com>
8490 Date: Tue Jul 8 22:47:31 2008 -0700
8492 ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
8494 Signed-off-by: Feng Kan <fkan@amcc.com>
8495 Signed-off-by: Stefan Roese <sr@denx.de>
8497 commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
8498 Author: Wolfgang Denk <wd@denx.de>
8499 Date: Fri Jul 11 01:16:00 2008 +0200
8501 Fix some more print() format errors.
8503 Signed-off-by: Wolfgang Denk <wd@denx.de>
8505 commit fdd70d1921b87287d9a99d1be99bc35226c2b412
8506 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8507 Date: Thu Jul 10 20:57:54 2008 +0200
8509 MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
8511 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8513 commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
8514 Author: Sergey Lapin <slapin@ossfans.org>
8515 Date: Thu Jun 5 11:06:29 2008 +0400
8517 DataFlash AT45DB021 support
8519 Some boards based on AT91SAM926X-EK use smaller DF chips to keep
8520 bootstrap, u-boot and its environment, using NAND or other external
8521 storage for kernel and rootfs. This patch adds support for
8522 small 1024x263 chip.
8524 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
8526 commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
8527 Author: Kim Phillips <kim.phillips@freescale.com>
8528 Date: Thu Jul 10 14:00:15 2008 -0500
8530 silence misc printf formatting compiler warnings
8532 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8534 commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
8535 Author: Markus Klotzbücher <mk@denx.de>
8536 Date: Thu Jul 10 14:47:09 2008 +0200
8538 USB: shutdown USB before booting
8540 This patch fixes a potentially serious issue related to USB which was
8541 discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
8542 ARM920T. Martin wrote:
8544 Turn off USB to prevent the host controller from writing to the
8545 SDRAM while Linux is booting. This could happen, because the HCCA
8546 (Host Controller Communication Area) lies within the SDRAM and the
8547 host controller writes continously to this area (as busmaster!), for
8548 example to increase the HccaFrameNumber variable, which happens
8551 This is a slightly modified version of the patch in order to shutdown
8552 USB when booting on all architectures.
8554 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8556 commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
8557 Author: Martha Marx <mmarx@silicontkx.com>
8558 Date: Thu May 29 14:23:25 2008 -0400
8560 Configuration changes for ADS5121 Rev 3
8562 ADS5121 Rev 3 board is now the default config
8564 config targets are now
8577 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
8578 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8579 Acked-by: John Rigby <jrigby@freescale.com>
8581 commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
8582 Author: Martha Marx <mmarx@silicontkx.com>
8583 Date: Thu May 29 15:37:21 2008 -0400
8585 Consolidate ADS5121 IO Pin configuration
8587 Consolidate ADS5121 IO Pin configuration to one file
8588 board/ads5121/iopin.c.
8590 Remove pin config from cpu/mpc512x/fec.c
8592 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
8593 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8594 Acked-by: John Rigby <jrigby@freescale.com>
8596 commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
8597 Author: Christian Eggers <christian@p2400.wgnetz.xx>
8598 Date: Fri Jun 27 19:46:51 2008 +0200
8600 Fix "usb part" command
8602 Only print partition for selected device if user supplied the <dev>
8603 arg with the "usb part [dev]" command.
8605 Signed-off-by: Christian Eggers <ceggers@gmx.de>
8606 Acked-by: Markus Klotzbuecher <mk@denx.de>
8608 commit cc83b27217f7380041fea386ddb6d6d9b261617d
8609 Author: Harald Welte <laforge@gnumonks.org>
8610 Date: Mon Jul 7 00:58:05 2008 +0800
8612 fix USB devices with multiple configurations
8614 This patch fixes bugs in usbdcore*.c related to the use of devices
8615 with multiple configurations.
8617 The original code made mistakes about the meaning of configuration value and
8618 configuration index, and the resulting off-by-one errors resulted in:
8620 * SET_CONFIGURATION always selected the first configuration, no matter what
8621 wValue is being passed.
8622 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
8623 configuration (index 0).
8625 Signed-off-by: Harald Welte <laforge@openmoko.org>
8626 Acked-by: Markus Klotzbuecher <mk@denx.de>
8628 commit 06c53beae1a726e707971c555613f09b270a2461
8629 Author: Wolfgang Denk <wd@denx.de>
8630 Date: Thu Jul 10 13:16:09 2008 +0200
8632 Fix some more print() format errors.
8634 Signed-off-by: Wolfgang Denk <wd@denx.de>
8636 commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
8637 Author: Christian Eggers <christian@p2400.wgnetz.xx>
8638 Date: Fri Jun 27 19:46:51 2008 +0200
8640 Fix "usb part" command
8642 Only print partition for selected device if user supplied the <dev>
8643 arg with the "usb part [dev]" command.
8645 Signed-off-by: Christian Eggers <ceggers@gmx.de>
8646 Acked-by: Markus Klotzbuecher <mk@denx.de>
8648 commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
8649 Author: Harald Welte <laforge@gnumonks.org>
8650 Date: Mon Jul 7 00:58:05 2008 +0800
8652 fix USB devices with multiple configurations
8654 This patch fixes bugs in usbdcore*.c related to the use of devices
8655 with multiple configurations.
8657 The original code made mistakes about the meaning of configuration value and
8658 configuration index, and the resulting off-by-one errors resulted in:
8660 * SET_CONFIGURATION always selected the first configuration, no matter what
8661 wValue is being passed.
8662 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
8663 configuration (index 0).
8665 Signed-off-by: Harald Welte <laforge@openmoko.org>
8666 Acked-by: Markus Klotzbuecher <mk@denx.de>
8668 commit e870690bdca154943ecadd5212d2d59c1b9d391b
8669 Author: Stefan Roese <sr@denx.de>
8670 Date: Thu Jul 10 10:10:54 2008 +0200
8672 MTD/NAND: Fix printf format warning in nand code
8674 This patch fixes NAND related printf format warning. Those warnings are
8675 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
8676 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
8679 Signed-off-by: Stefan Roese <sr@denx.de>
8681 commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
8682 Author: Stefan Roese <sr@denx.de>
8683 Date: Thu Jul 10 10:00:45 2008 +0200
8685 rtc: Fix printf format warning in m41t60.c
8687 Signed-off-by: Stefan Roese <sr@denx.de>
8689 commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
8690 Author: Stefan Roese <sr@denx.de>
8691 Date: Tue Jul 8 12:01:47 2008 +0200
8693 pci: Move PCI device configuration check into a separate weak function
8695 This patch moves the check, if a device should be skipped in PCI PNP
8696 configuration into the function pci_skip_dev(). This function is defined
8697 as weak so that it can be overwritten by a platform specific one if
8698 needed. The check if the device should get printed in the PCI summary upon
8699 bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
8700 pci_print_dev() which is also defined as weak too.
8702 Signed-off-by: Stefan Roese <sr@denx.de>
8704 commit b002144e1dc21374b1ef5281fe6b5d014af96650
8705 Author: Stefan Roese <sr@denx.de>
8706 Date: Thu Jul 10 09:58:06 2008 +0200
8708 ppc4xx: Fix printf format warnings now visible with the updated format check
8710 This patch fixes ppc4xx related printf format warning. Those warnings are
8711 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
8712 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
8715 Signed-off-by: Stefan Roese <sr@denx.de>
8717 commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
8718 Author: Stefan Roese <sr@denx.de>
8719 Date: Wed Jul 9 17:33:57 2008 +0200
8721 ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
8723 Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
8724 To support such configurations, we "only" map the first 2GB via the TLB's. We
8725 need some free virtual address space for the remaining peripherals like, SoC
8728 Note that ECC is currently not supported on configurations with more than 2GB
8729 SDRAM. This is because we only map the first 2GB on such systems, and therefore
8730 the ECC parity byte of the remaining area can't be written.
8732 Signed-off-by: Stefan Roese <sr@denx.de>
8734 commit cf1c2ed91df26903b956948f37f82de9e1158a89
8735 Author: Larry Johnson <lrj@acm.org>
8736 Date: Sat Jun 14 17:02:49 2008 -0400
8738 ppc4xx: Remove implementation of testdram() from Korat board support
8740 Signed-off-by: Larry Johnson <lrj@acm.org>
8741 Signed-off-by: Stefan Roese <sr@denx.de>
8743 commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
8744 Author: Larry Johnson <lrj@acm.org>
8745 Date: Sat Jun 14 16:53:02 2008 -0400
8747 ppc4xx: Update and add FDT to Korat board support
8749 Signed-off-by: Larry Johnson <lrj@acm.org>
8750 Signed-off-by: Stefan Roese <sr@denx.de>
8752 commit 4188f0491886b3b486164e819c0a83fdb97efd7d
8753 Author: Wolfgang Denk <wd@denx.de>
8754 Date: Thu Jul 10 01:13:30 2008 +0200
8756 Minor coding style cleanup; update CHANGELOG
8758 Signed-off-by: Wolfgang Denk <wd@denx.de>
8760 commit 8915f1189c1d29d8be7f4de325702d90a8988219
8761 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
8762 Date: Wed Jul 9 17:50:45 2008 -0400
8764 e1000: add support for 82545GM 64bit PCI-X copper variant
8766 This PCI-X e1000 variant works by just adding in the correct
8767 PCI IDs in the appropriate places.
8769 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
8771 commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
8772 Author: Daniel Hellstrom <daniel@gaisler.com>
8773 Date: Wed Jul 9 12:34:11 2008 +0000
8775 SPARC: Build error fix
8777 (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
8779 This patch makes SPARC targets build again. It is caused by
8780 phys_addr_t and phys_size_t being defined in the wrong header
8781 file. include/lmb.h need those typedefs to build.
8783 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
8785 commit 11ccc33fa21acce108f6b4a6936e3271af904c64
8786 Author: Marcel Ziswiler <marcel@ziswiler.com>
8787 Date: Wed Jul 9 08:17:15 2008 +0200
8789 Many spelling fixes in README.
8791 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8793 commit dbab0691d2533560f7e91b92ae844046a9ad1df3
8794 Author: Marcel Ziswiler <marcel@ziswiler.com>
8795 Date: Wed Jul 9 08:17:06 2008 +0200
8797 Minor spelling fix in comment.
8799 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8801 commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
8802 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8803 Date: Tue Jul 8 14:54:58 2008 -0400
8805 Round the serial port clock divisor value returned by calc_divisor()
8807 Round the serial port clock divisor value returned by
8810 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8811 Signed-off-by: John Roberts <john.roberts@pwav.com>
8813 commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
8814 Author: Scott Wood <scottwood@freescale.com>
8815 Date: Wed Jul 9 17:47:52 2008 -0500
8817 NAND: ifdef-protect most of nand.h when using legacy NAND.
8819 Some macros such as NAND_CTL_SETALE conflict between current and legacy
8820 NAND, being defined by the subsystem in the former case and the board
8821 config file in the latter.
8823 Signed-off-by: Scott Wood <scottwood@freescale.com>
8825 commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
8826 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8827 Date: Tue Jul 8 11:02:05 2008 -0400
8829 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
8831 ARM: Fix for incorrect version of patch applied when
8832 adding support for the Lyrtech SFF-SDR board.
8834 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8835 Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
8837 commit 47042b363ee5022b8180c65d3f4558e7972c79cd
8838 Author: Kyungmin Park <kmpark@infradead.org>
8839 Date: Tue Jul 8 09:08:40 2008 +0900
8841 Remove useless print message at apollon
8843 Remove useless print message at apollon
8845 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8847 commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
8848 Author: Andy Fleming <afleming@freescale.com>
8849 Date: Mon Jul 7 14:24:39 2008 -0500
8853 The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
8854 of casting problems in the bootm code that called the LMB functions.
8856 Signed-off-by: Andy Fleming <afleming@freescale.com>
8858 commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
8859 Author: Kumar Gala <galak@kernel.crashing.org>
8860 Date: Mon Jul 7 09:39:06 2008 -0500
8862 Fix compiler warnings
8864 gcc-4.3.x generates the following:
8866 bootm.c: In function 'do_bootm_linux':
8867 bootm.c:208: warning: cast from pointer to integer of different size
8868 bootm.c:215: warning: cast from pointer to integer of different size
8870 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8872 commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
8873 Author: Harald Welte <laforge@gnumonks.org>
8874 Date: Mon Jul 7 15:40:39 2008 +0800
8876 Remove code duplication for setting the default environment
8878 common/env_common.c (default_env): new function that resets the environment to
8880 common/env_common.c (env_relocate): use default_env instead of own copy
8881 common/env_nand.c (env_relocate_spec): use default_env instead of own copy
8882 include/environment.h: added default_env prototype
8884 Signed-off-by: Werner Almesberger <werner@openmoko.org>
8885 Signed-off-by: Harald Welte <laforge@openmoko.org>
8887 commit 99c2b434d37863df5dda5207a53760c6506fc2be
8888 Author: Marcel Ziswiler <marcel@ziswiler.com>
8889 Date: Sun Jun 22 16:13:46 2008 +0200
8891 NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
8893 The writeenv() and readenv() calls introduced by the recently added bad block
8894 management for environment variables were missing casts therefore producing
8895 compile time warnings.
8896 While at it fixing some typo in a comment and indentation.
8898 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8899 Signed-off-by: Scott Wood <scottwood@freescale.com>
8901 commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
8902 Author: Scott Wood <scottwood@freescale.com>
8903 Date: Fri Jun 20 12:38:57 2008 -0500
8905 NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
8907 This is particularly problematic now that non-NAND-specific code is
8908 including <nand.h>, and thus all debugging code is being compiled
8909 regardless of whether it was requested, as reported by Scott McNutt
8910 <smcnutt@psyent.com>.
8912 Signed-off-by: Scott Wood <scottwood@freescale.com>
8914 commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
8915 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8916 Date: Thu Jun 12 19:27:58 2008 +0200
8918 mmc: Move atmel_mci driver into drivers/mmc
8920 This makes it easier to use the driver on other platforms.
8922 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8923 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8925 commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
8926 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8927 Date: Thu Jun 12 19:27:57 2008 +0200
8929 avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
8931 After we move the atmel_mci driver into drivers/mmc, we can't select
8932 it with CONFIG_MMC anymore. Introduce a new symbol specifically for
8933 this driver so that there's no ambiguity.
8935 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8936 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8938 commit 5ce13051a48c62bda9723df3b4778c492fb47f36
8939 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8940 Date: Thu Jun 12 19:27:56 2008 +0200
8942 Create drivers/mmc subdirectory
8944 In order to consolidate more of the various MMC drivers around the
8945 tree, we must first have a common place to put them.
8947 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8948 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8950 commit b502611b51f02718c2d1117d4981dabceb5af6de
8951 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
8952 Date: Sun Jul 6 12:30:09 2008 +0200
8954 Change env_get_char from a global function ptr to a function
8956 This avoids an early global data reference.
8958 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
8960 commit 27269417ade432189b234d9fbac98b54e37b978c
8961 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
8962 Date: Sun Jul 6 13:57:58 2008 +0400
8964 Some copy-n-paste fixes in printf usage
8966 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
8968 commit 0e6989b9faf1588e8723535539e88a0df3c71356
8969 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
8970 Date: Sun Jul 6 13:57:00 2008 +0400
8972 FDT memory and pci node fixes for MPC8260ADS
8974 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
8976 commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
8977 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
8978 Date: Mon Jul 7 06:41:14 2008 -0700
8982 The compiler will help find mismatches between printf formats and
8983 arguments if you let it. This patch adds the necessary attributes to
8984 declarations in include/common.h, then begins to correct the resulting
8985 compiler warnings. Some of these were bugs, e.g., "$d" instead of
8986 "%d" and incorrect arguments. Others were just annoying, like
8987 int-long mismatches on a system where both are 32 bits. It's worth
8988 fixing the annoying errors to catch the real ones.
8990 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
8992 commit 417faf285b2527acb2de24c5cd3e2621d385408c
8993 Author: Becky Bruce <becky.bruce@freescale.com>
8994 Date: Wed Jul 9 11:09:41 2008 -0500
8996 Allow print_size to print in GB
8998 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9000 commit e7c374529c87525c9aa463e0557c287887ae4e9e
9001 Author: Jason McMullan <mcmullan@netapp.com>
9002 Date: Sun Jun 8 23:56:00 2008 -0400
9004 mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
9006 Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
9007 they are set in the U-Boot environment.
9009 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
9010 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
9012 commit 0192d7d56e9320819dea262f49789ae18fdd2c72
9013 Author: Stefan Roese <sr@denx.de>
9014 Date: Tue Jul 8 12:57:14 2008 +0200
9016 jedec_flash: Fix AM29DL800BB device ID
9018 As pointed out by Jerry Hicks, this patch corrects the device ID of
9019 the Spansion AM29DL800BB NOR device. Verified against latest Spansion
9020 datasheet (rev C4 from Dezember 2006).
9022 Signed-off-by: Stefan Roese <sr@denx.de>
9024 commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
9025 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9026 Date: Mon Jul 7 11:22:37 2008 +0900
9028 sh: Fix compile error sh7763rdp board
9030 Disable SH ether driver.
9032 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9034 commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
9035 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9036 Date: Tue Jul 8 12:03:24 2008 +0900
9038 sh: Fix SH-boards compile error
9040 By Cleanup out-or-tree building for some boards (.depend)
9041 (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
9042 because filse ware changed, some SH-boards have compile error.
9043 I revised this problem.
9045 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9047 commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
9048 Author: Jason Jin <Jason.jin@freescale.com>
9049 Date: Tue May 13 11:50:36 2008 +0800
9051 Feed the watchdog in u-boot for 8610 board.
9053 The watchdog on 8610 board is enabled by setting sw[6]
9054 to on. Once enabled, the watchdog can not be disabled
9055 by software. So feed the dog in u-boot is necessary for
9058 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9060 commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
9061 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9062 Date: Wed Jun 18 12:10:33 2008 -0400
9064 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
9066 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
9068 Remove duplicate code in a if/else block in
9069 cpu/arm926ejs/davinci/lxt972.c.
9072 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9073 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9075 commit fec61431a003f5778bafa2624073a571af8bec9f
9076 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9077 Date: Wed Jun 18 12:10:31 2008 -0400
9079 Remove duplicate definitions in include/lxt971a.h.
9081 Remove duplicate definitions in include/lxt971a.h.
9083 Remove duplicate registers and bits definitions in
9084 include/lxt971a.h for standard MII registers, and
9085 use values in include/miiphy.h instead.
9087 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9088 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9090 commit 9751ee0990f467941da0b095a4e995f863672d7a
9091 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9092 Date: Wed Jun 11 21:05:00 2008 +0900
9094 net: sh: Renesas SH7763 Ethernet device support
9096 Renesas SH7763 has 2 channel Ethernet device.
9097 This is 10/100/1000 Base support.
9098 But this patch check 10/100 Base only.
9100 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9101 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9103 commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
9104 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9105 Date: Tue Jun 17 16:28:05 2008 +0900
9107 sh: Update Renesas R2DPlus board
9109 New NOR Flash board support and remove old type flash board config.
9110 And Remove network setting from config file.
9112 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9113 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9115 commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
9116 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9117 Date: Tue Jun 17 16:28:01 2008 +0900
9119 sh: Update Renesas R7780MP board
9121 New NOR Flash board support and remove network setting from config file.
9123 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9124 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9126 commit c001cd604e9f133743effbddb1c215b48e761c5a
9127 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9128 Date: Tue Jun 17 16:27:56 2008 +0900
9130 sh: Update Renesas Migo-R board
9132 Remove network setting from config file.
9134 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9135 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9137 commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
9138 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9139 Date: Tue Jun 17 16:27:52 2008 +0900
9141 sh: Update Hitachi MS7722SE board
9143 Remove network setting from config file.
9145 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9146 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9148 commit 26209e48e8791670c93108029a5c31a30016c6df
9149 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9150 Date: Tue Jun 17 16:27:48 2008 +0900
9152 sh: Cleanup source code of SH7763RDP
9154 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9155 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9157 commit 5cd5b2c96ef0025762931349d350287aec03ab47
9158 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9159 Date: Tue Jun 17 16:27:44 2008 +0900
9161 sh: Cleanup source code of R2DPlus
9163 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9164 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9166 commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
9167 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9168 Date: Tue Jun 17 16:27:41 2008 +0900
9170 sh: Cleanup source code of R7780MP
9172 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9173 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9175 commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
9176 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9177 Date: Tue Jun 17 16:27:38 2008 +0900
9179 sh: Cleanup source code of MS7722SE
9181 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9182 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9184 commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
9185 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9186 Date: Tue Jun 17 16:27:34 2008 +0900
9188 sh: Cleanup source code of MS7720SE
9190 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9191 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9193 commit 3ab4827cbe409488ebea1a2ee5094783f2672214
9194 Author: Wolfgang Denk <wd@denx.de>
9195 Date: Mon Jul 7 00:45:03 2008 +0200
9197 SH: fix out of tree building
9199 Signed-off-by: Wolfgang Denk <wd@denx.de>
9201 commit 9047bfa1e737d787be460387dd6f45737eeceb10
9202 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9203 Date: Thu Jul 3 23:16:06 2008 +0900
9205 net: smc911x: Fix typo
9207 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9209 commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
9210 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9211 Date: Wed Jul 2 18:54:08 2008 +0200
9213 update mvBL-M7 board config
9215 update mvBL-M7 config file to use UBOOT_VERSION and define
9218 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9220 commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
9221 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9222 Date: Mon Jun 30 17:45:01 2008 +0900
9224 net: fix compile problem in smc911x driver.
9226 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9227 Acked-by: Ben Warren <biggerbadderben@gmail.com>
9229 commit 9fea65a6c469b1b474b27446feb58738baba2d31
9230 Author: Michal Simek <monstr@monstr.eu>
9231 Date: Tue Jun 24 09:54:09 2008 +0200
9233 ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
9235 This change helps with better handling with others
9236 Xilinx based platform.
9238 Signed-off-by: Michal Simek <monstr@monstr.eu>
9239 Acked-by: Stefan Roese <sr@denx.de>
9241 commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
9242 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9243 Date: Tue Jun 17 13:07:11 2008 +0900
9245 net: ne2000: Move dev_addr variable from grobal to local.
9247 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9248 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9250 commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
9251 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9252 Date: Tue Jun 17 13:07:15 2008 +0900
9254 net: ne2000: Fix compile error of NE2000
9256 If enable DEBUG, can not compile ne2000 driver.
9258 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9259 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9261 commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
9262 Author: Ben Warren <biggerbadderben@gmail.com>
9263 Date: Mon Jun 23 22:57:27 2008 -0700
9265 Add mechanisms for CPU and board-specific Ethernet initialization
9267 This patch is the first step in cleaning up net/eth.c, by moving Ethernet
9268 initialization to CPU or board-specific code. Initial implementation is
9269 only on the Freescale TSEC controller, but others will be added soon.
9271 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9273 commit 7754f2be5d1835d263aad21b5a629526f3e680b0
9274 Author: Wolfgang Denk <wd@denx.de>
9275 Date: Sun Jul 6 01:21:46 2008 +0200
9277 include/sha256.h: fix file permissions.
9279 Signed-off-by: Wolfgang Denk <wd@denx.de>
9281 commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
9282 Author: Patrice Vilchez <patrice.vilchez@atmel.com>
9283 Date: Tue May 27 11:15:29 2008 +0200
9285 [AT91SAM9] Fix NAND FLASH timings
9287 Fix NAND FLASH timings for at91sam9x evaluation kits.
9289 New timings are based on application note
9290 "NAND Flash Support on AT91SAM9 Microcontrollers" available at
9291 http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
9293 Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
9294 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9295 Acked-by: Stelian Pop <stelian@popies.net>
9297 commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
9298 Author: Stelian Pop <stelian@popies.net>
9299 Date: Thu May 22 00:15:40 2008 +0200
9301 Fix boot from NOR due to incorrect reset delay.
9303 AT91 RSTC registers are battery-backuped, so their values
9304 are not reset across power cycles. One of those registers,
9305 the AT91_RSTC_MR register, is being modified by U-Boot, in
9306 the ethernet initialisation routine, to generate a 500ms
9309 Unfortunately, this value is not being restored afterwards,
9310 causing subsequent resets to also last for 500ms.
9312 This long reset sequence causes problems (at least) in the
9313 boot sequence from NOR: by the time the CPU tries to load
9314 a program from the NOR flash, the latter is still in reset
9315 and not yet available.
9317 Additionaly, this patch fixes a bug in the original code which
9318 caused the reset delay to last for 2s instead of 500ms.
9320 Signed-off-by: Stelian Pop <stelian@popies.net>
9321 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9323 commit f492dd636fbbae529e17533995bc6e5813c007f6
9324 Author: Wolfgang Denk <wd@denx.de>
9325 Date: Fri Jul 4 20:11:49 2008 +0200
9329 Signed-off-by: Wolfgang Denk <wd@denx.de>
9331 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
9332 Author: Wolfgang Denk <wd@denx.de>
9333 Date: Fri Jul 4 20:07:35 2008 +0200
9335 CCM/SCM boards: fix out of tree building
9337 Signed-off-by: Wolfgang Denk <wd@denx.de>
9339 commit ab4c3a490df9a964711556d2a05b0c787db45fde
9340 Author: Wolfgang Denk <wd@denx.de>
9341 Date: Thu Jul 3 23:22:27 2008 +0200
9343 SCM board: fix build errors.
9345 Signed-off-by: Wolfgang Denk <wd@denx.de>
9347 commit a566466f17ba0e2d2b6c250e77da678fb932470d
9348 Author: Wolfgang Denk <wd@denx.de>
9349 Date: Thu Jul 3 23:06:36 2008 +0200
9351 IAD210 board: fix ``"ALIGN" redefined'' warning.
9353 Signed-off-by: Wolfgang Denk <wd@denx.de>
9355 commit ad756314797c16fa5dca23e115aab881011f164f
9356 Author: Wolfgang Denk <wd@denx.de>
9357 Date: Thu Jul 3 23:00:24 2008 +0200
9359 CCM board: fix build errors.
9361 Signed-off-by: Wolfgang Denk <wd@denx.de>
9363 commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
9364 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9365 Date: Wed Jul 2 18:54:08 2008 +0200
9367 update mvBL-M7 board config
9369 update mvBL-M7 config file to use UBOOT_VERSION.
9371 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9372 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9374 commit ced209c50e80c25f13c083099b05044048d21f4f
9375 Author: Wolfgang Denk <wd@denx.de>
9376 Date: Thu Jul 3 22:39:21 2008 +0200
9378 sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
9380 Signed-off-by: Wolfgang Denk <wd@denx.de>
9382 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
9383 Author: Wolfgang Denk <wd@denx.de>
9384 Date: Thu Jul 3 22:34:08 2008 +0200
9386 Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
9388 Signed-off-by: Wolfgang Denk <wd@denx.de>
9390 commit 730f298485984b011b6ee8f4acb511cb45a843dd
9391 Author: Wolfgang Denk <wd@denx.de>
9392 Date: Thu Jul 3 22:04:17 2008 +0200
9394 lmb: fix "implicit declaration of function 'lmb_free'" warning
9396 Signed-off-by: Wolfgang Denk <wd@denx.de>
9398 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
9399 Author: Wolfgang Denk <wd@denx.de>
9400 Date: Wed Jul 2 23:53:23 2008 +0200
9402 Cleanup: remove redundant deleting on *~ files
9404 Signed-off-by: Wolfgang Denk <wd@denx.de>
9406 commit c8a3b109f07f02342d097b30908965f7261d9f15
9407 Author: Wolfgang Denk <wd@denx.de>
9408 Date: Wed Jul 2 23:49:18 2008 +0200
9410 Cleanup out-or-tree building for some boards (.depend)
9412 Signed-off-by: Wolfgang Denk <wd@denx.de>
9414 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
9415 Author: Wolfgang Denk <wd@denx.de>
9416 Date: Wed Jul 2 23:38:50 2008 +0200
9418 Cleanup: fix out-of-tree building for some boards
9420 Signed-off-by: Wolfgang Denk <wd@denx.de>
9422 commit 461fa68d20861811487944d22291db5a13410e20
9423 Author: Wolfgang Denk <wd@denx.de>
9424 Date: Wed Jul 2 23:00:14 2008 +0200
9426 Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
9428 Signed-off-by: Wolfgang Denk <wd@denx.de>
9430 commit 5981ebd32017e062b08aa6747cf591276f2db779
9431 Author: Detlev Zundel <dzu@denx.de>
9432 Date: Fri Jun 20 22:26:24 2008 +0200
9434 fdt: Fix typo in variable name.
9436 Signed-off-by: Detlev Zundel <dzu@denx.de>
9438 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
9439 Author: Gary Jennejohn <garyj@denx.de>
9440 Date: Thu Jun 19 11:11:19 2008 +0200
9442 Add logos for RRvision board
9444 Signed-off-by: Gary Jennejohn <garyj@denx.de>
9446 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
9447 Author: Esben Haabendal <EsbenHaabendal@gmail.com>
9448 Date: Wed Jun 18 11:03:57 2008 +0200
9450 mpc8260: add fdt_fixup_ethernet support
9452 Add support for updating mac-address and local-mac-address in fdt for
9453 all MPC8260 targets.
9455 Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
9457 commit f6a69559d64498a04e1e0b087a9b920e5775f866
9458 Author: Steven A. Falco <sfalco@harris.com>
9459 Date: Thu Jun 12 13:24:42 2008 -0400
9461 cmd_nvedit.c: clean up syntax highlighting
9463 My text-editor (vim) has a bit of trouble syntax-highlighting the
9464 cmd_nvedit.c file, because it apparently does not parse C
9465 ifdef/else/endif. The following patch does not change the behavior of
9466 the code at all, but does allow the editor to properly
9467 syntax-highlight the file.
9469 Signed-off-by: Steve Falco <sfalco@harris.com>
9471 commit 75678c807a6272ecc5541eb32898c93887f08400
9472 Author: Steven A. Falco <sfalco@harris.com>
9473 Date: Thu Jun 12 13:22:12 2008 -0400
9475 Make setenv() return status
9477 Currently, the setenv function does not return an error code.
9478 This patch allows to test for errors.
9480 Signed-off-by: Steve Falco <sfalco@harris.com>
9482 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
9483 Author: Kumar Gala <galak@kernel.crashing.org>
9484 Date: Wed Jun 11 10:14:06 2008 -0500
9486 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
9488 fls64, __ilog2_u64, ffs64 are variants that work on an u64,
9489 and fls is used to implement them.
9491 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9493 commit 83002a77cbdf383015ca384eff5fa31722d8e571
9494 Author: Magnus Lilja <lilja.magnus@gmail.com>
9495 Date: Mon Jun 9 22:58:48 2008 +0200
9497 i.MX31: Cleanup comments in lowlevel_init.S.
9499 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
9501 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
9502 Author: Ben Warren <biggerbadderben@gmail.com>
9503 Date: Sun Jun 8 23:28:33 2008 -0700
9505 Move conditional compilation of MPC8XXX SPI driver to Makefile
9507 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9509 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
9510 Author: Juergen Kilb <J.Kilb@gmx.de>
9511 Date: Sun Jun 8 17:59:53 2008 +0200
9513 i.MX31: fixed CTRL-C detection
9515 The Register URXD contains status information in bits [15..8].
9516 With status bit 15 set, CTRL-C was reported as 0x8003 instead
9517 of 0x03. Therefore CTRL-C was not detected.
9518 To solve this, bits [15..8] were masked out now.
9520 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
9521 Acked-by: Felix Radensky <felix@embedded-sol.com>
9523 commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
9524 Author: Stefan Roese <sr@denx.de>
9525 Date: Tue Jul 1 17:03:19 2008 +0200
9527 ppc4xx: Fix 460EX/GT PCIe port initialization
9529 This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
9530 configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
9533 Signed-off-by: Stefan Roese <sr@denx.de>
9535 commit b571afde0295b007a45055ee49f8822c753a5651
9536 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9537 Date: Sat Jun 7 12:29:52 2008 +0200
9541 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9542 Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
9544 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
9545 Author: Marian Balakowicz <m8@semihalf.com>
9546 Date: Fri Jun 6 23:07:40 2008 +0200
9548 Delay FIT format check on sector based devices
9550 Global FIT image operations like format check cannot be performed on
9551 a first sector data, defer them to the point when whole FIT image was
9552 uploaded to a system RAM.
9554 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9555 Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
9556 NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
9558 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
9559 Author: Dave Liu <r63238@freescale.com>
9560 Date: Tue Jun 3 17:38:19 2008 +0800
9562 sata: wait for device updating signature to host
9564 The driver need wait for the device updating signature to host.
9565 If we don't wait for it, the driver can not detect the device(disk)
9566 when the system powers up.
9568 Signed-off-by: Dave Liu <daveliu@freescale.com>
9570 commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
9571 Author: Stefan Roese <sr@denx.de>
9572 Date: Sat Jun 28 14:56:17 2008 +0200
9574 ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
9576 This patch implements a fix provided by AMCC so that the lockup upon
9577 simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
9580 Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
9581 (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
9582 USB 2.0 host and SATA.
9584 This errata is not officially available yet. I'll update the comment
9585 to add the errata number later.
9587 Signed-off-by: Stefan Roese <sr@denx.de>
9589 commit 8b616edb118e37d05f6401389eaee1c636b22828
9590 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
9591 Date: Mon Jun 2 16:42:19 2008 -0400
9593 serial_pl010.c: add watchdog support
9595 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
9597 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
9598 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
9599 Date: Mon Jun 2 16:40:08 2008 -0400
9601 jffs2_1pass.c: add watchdog support
9603 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
9605 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
9606 Author: Sascha Laue <sascha.laue@liebherr.com>
9607 Date: Fri May 30 09:48:14 2008 +0200
9609 Configure DSP POST; add watchdog reset to diag command
9611 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
9613 commit f13526517859bf6b573e23ff47199e107d1009b5
9614 Author: Tor Krill <tor@excito.com>
9615 Date: Thu May 29 10:40:17 2008 +0200
9617 Add sata sil3114 support
9619 Signed-off-by: Tor Krill <tor@excito.com>
9621 commit e093a247628228100f405b6d7f6b1bfc16141938
9622 Author: Wolfgang Denk <wd@denx.de>
9623 Date: Sat Jun 28 23:34:37 2008 +0200
9625 Coding Style Cleanup
9627 Signed-off-by: Wolfgang Denk <wd@denx.de>
9629 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
9630 Author: Wolfgang Denk <wd@denx.de>
9631 Date: Sat Jun 28 23:16:01 2008 +0200
9635 Signed-off-by: Wolfgang Denk <wd@denx.de>
9637 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
9638 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9639 Date: Wed May 21 13:58:41 2008 -0400
9641 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
9643 This patch adds support for the Lyrtech SFF-SDR board,
9644 based on the TI DaVinci architecture (ARM926EJS).
9646 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9647 Signed-off-by: Philip Balister <philip@balister.org>
9648 Signed-off-by: Wolfgang Denk <wd@denx.de>
9650 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
9651 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9652 Date: Thu May 22 11:09:59 2008 +0200
9654 MMC: Consolidate MMC/SD command definitions
9656 This moves the MMC and SD Card command definitions from
9657 include/asm/arch/mmc.h into include/mmc.h. These definitions are
9658 given by the MMC and SD Card standards, not by any particular
9661 There's a lot more room for consolidation in the MMC drivers which
9662 I'm hoping to get done eventually, but this patch is a start.
9664 Compile-tested for all avr32 boards as well as lpc2292sodimm and
9665 lubbock. This should cover all three mmc drivers in the tree.
9667 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9669 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
9670 Author: Kyungmin Park <kmpark@infradead.org>
9671 Date: Wed May 21 14:38:08 2008 +0900
9673 Use better Ethernet timings for apollon board
9675 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9677 commit 41c5eaa7253ed82bbae1eda5667755872c615164
9678 Author: Andy Fleming <afleming@freescale.com>
9679 Date: Mon Jun 16 13:58:56 2008 -0500
9681 Resize device tree to allow space for board changes and the chosen node
9683 Current code requires that a compiled device tree have space added to the end to
9684 leave room for extra nodes added by board code (and the chosen node). This
9685 requires that device tree creators anticipate how much space U-Boot will add to
9686 the tree, which is absurd. Ideally, the code would resize and/or relocate the
9687 tree when it needed more space, but this would require a systemic change to the
9688 fdt code, which is non-trivial. Instead, we resize the tree inside
9689 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
9690 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
9692 Signed-off-by: Andy Fleming <afleming@freescale.com>
9694 commit 7570a9941fc565922078679a72d246fe208d696d
9695 Author: Andy Fleming <afleming@freescale.com>
9696 Date: Mon Jun 16 13:58:55 2008 -0500
9698 Fix an underflow bug in __lmb_alloc_base
9700 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
9701 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
9702 merely updates __lmb_alloc_base to resemble the current version in Linux.
9704 Signed-off-by: Andy Fleming <afleming@freescale.com>
9706 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
9707 Author: Andy Fleming <afleming@freescale.com>
9708 Date: Mon Jun 16 13:58:54 2008 -0500
9712 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
9713 lmb_reserve to temporarily reserve some memory.
9715 Signed-off-by: Andy Fleming <afleming@freescale.com>
9717 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
9718 Author: Andy Fleming <afleming@freescale.com>
9719 Date: Mon Jun 16 13:58:53 2008 -0500
9723 ALIGN() returns the smallest aligned value greater than the passed
9724 in address or size. Taken from Linux.
9726 Signed-off-by: Andy Fleming <afleming@freescale.com>
9728 commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
9729 Author: Stefan Roese <sr@denx.de>
9730 Date: Tue Jun 24 17:15:22 2008 +0200
9732 ppc4xx: Fix compilation problems with phys_size_t
9734 This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
9735 board specific files where it has been missing.
9737 Signed-off-by: Stefan Roese <sr@denx.de>
9739 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
9740 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
9741 Date: Mon May 19 12:26:38 2008 +0200
9743 Conditionally add -fno-stack-protector to CFLAGS
9745 When compile-testing on powerpc, I get errors like this:
9747 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
9749 This seems to be because -fstack-protector is on by default, so
9750 let's explicitly disable it on all architectures that support the
9753 The Ubuntu toolchain is affected by this problem, and according to
9754 Mike Frysinger, Gentoo has been running with SSP enabled for years.
9755 More and more distros are turning SSP on by default, so this problem
9756 is likely to get worse in the future.
9758 Also, powerpc just happens to be one of the arches I do
9759 compile-testing on. There may be other arches affected by this too.
9761 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9763 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
9764 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9765 Date: Sun May 18 19:09:52 2008 +0200
9767 pcmcia/ti_pci1410a: Move compile condition to the Makefile
9769 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9771 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
9772 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9773 Date: Sun May 18 19:09:51 2008 +0200
9775 pxa_pcmcia: Move compile condition to the Makefile
9777 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9779 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
9780 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9781 Date: Sun May 18 19:09:50 2008 +0200
9783 marabun_pcmcia: Move compile condition to the Makefile
9785 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9787 commit 6a19c46cae43c16c528eddefae3db97134f1915d
9788 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9789 Date: Mon Jun 23 13:25:34 2008 +0200
9791 fix non-working mvBL-M7
9793 Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
9795 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9796 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9798 commit 846f1574ddddeda2bc227655e687308695f41cdc
9799 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9800 Date: Mon Jun 23 11:40:56 2008 +0200
9802 fix system config overwrite @ MPC834x and MPC8313
9804 During 83xx setup the "System I/O configuration register high" gets
9805 overwritten with user defined value if CFG_SICRH is defined.
9807 Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
9808 must keep their reset value regardless of configuration.
9810 On my board (using RGMII) those bits are set after reset - yet it's
9811 unclear where they come from.
9813 The patch keeps both bits on MPC834x and MPC8313.
9815 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9816 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9818 commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
9819 Author: Kim Phillips <kim.phillips@freescale.com>
9820 Date: Tue Jun 17 17:45:27 2008 -0500
9822 mpc83xx: move CPU_TYPE_ENTRY over to processor.h
9826 cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
9827 In file included from cpu.c:33:
9828 /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
9830 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9832 commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
9833 Author: Stefan Roese <sr@denx.de>
9834 Date: Mon Jun 23 11:15:09 2008 +0200
9836 ppc4xx: Fix problem in gpio_config()
9838 As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
9839 left by one. So the additional shift is bogus.
9841 Signed-off-by: Stefan Roese <sr@denx.de>
9843 commit 40777812316fc252c941665c0f60c148fd79d50f
9844 Author: Detlev Zundel <dzu@denx.de>
9845 Date: Fri Jun 20 22:24:05 2008 +0200
9847 fdt: Fix typo in variable name.
9849 Signed-off-by: Detlev Zundel <dzu@denx.de>
9851 commit 5f723a3b98c630bde33de74351f2121691fdef14
9852 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9853 Date: Fri Jun 20 10:41:05 2008 +0200
9855 avr32: Enable SPI flash support on ATNGW100
9857 The ATNGW100 has 8MB DataFlash on board. Give users access to it through
9858 the new SPI flash framework.
9860 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9862 commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
9863 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9864 Date: Fri Jun 20 12:44:28 2008 +0200
9866 avr32: Fix SPI portmux initialization
9868 Use the new GPIO manipulation functions to set up the chip select lines,
9869 and make sure both busses use GPIO for chip select control.
9871 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9873 commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
9874 Author: Peter Ma <pma@mediamatech.com>
9875 Date: Sun Jun 1 22:59:24 2008 -0700
9877 avr32: Add GPIO manipulation functions
9879 Adds GPIO manipulation functions for AVR32 AP7 platform.
9881 Signed-off-by: Peter Ma <pma@mediamatech.com>
9882 [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
9883 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9885 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
9886 Author: Wolfgang Grandegger <wg@grandegger.com>
9887 Date: Thu Jun 5 13:02:30 2008 +0200
9889 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
9891 This patch is based on the following patch sent a few minutes ago:
9892 "NAND FSL UPM: driver re-write using the hwcontrol callback"
9893 It is untested, of course. Anton, could you please give it a try.
9895 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
9896 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9898 commit 96026d42fa4e646d28318c0a1438aac4b2017909
9899 Author: Anatolij Gustschin <agust@denx.de>
9900 Date: Thu Jun 12 12:40:11 2008 +0200
9904 Building for 4xx doesn't work since commit 4dbdb768:
9906 In file included from 4xx_pcie.c:28:
9907 include/asm/processor.h:971: error: expected ')' before 'ver'
9908 make[1]: *** [4xx_pcie.o] Error 1
9910 This patch fixes the problem.
9912 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9913 Acked-by: Stefan Roese <sr@denx.de>
9914 Acked-by: Kumar Gala <galak@kernel.crashing.org>
9916 commit a036b0443657fe0f4773786de9092251869f08ac
9917 Author: Kumar Gala <galak@kernel.crashing.org>
9918 Date: Thu Jun 19 01:45:50 2008 -0500
9920 MPC8610HPCD: Report board id, board version and fpga version.
9922 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9924 commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
9925 Author: Kumar Gala <galak@kernel.crashing.org>
9926 Date: Thu Jun 19 01:45:27 2008 -0500
9928 MPC8641HPCN: Report board id, board version and fpga version.
9930 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9932 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
9933 Author: Stefan Roese <sr@denx.de>
9934 Date: Mon Jun 16 10:40:02 2008 +0200
9936 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
9938 This patch simplifies flash_toggle() (AMD commandset), which is used to
9939 detect if a FLASH device is still busy with erase/program operations. On
9940 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
9941 did not detect the busy state reliably, resulting in non erased sectors
9942 etc. This patch now simplifies this function by "just" comparing the
9943 complete data-word instead of ANDing it with the command-word (0x40)
9944 before the compatison. It is done the same way in the Linux implementation
9945 chip_ready() in cfi_cmdset_0002.c.
9947 Signed-off-by: Stefan Roese <sr@denx.de>
9949 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
9950 Author: Philip Balister <philip@balister.org>
9951 Date: Mon Jun 16 08:58:07 2008 -0400
9953 NAND: Add missing declaration to non-redundant saveenv().
9955 Signed-off-by: Scott Wood <scottwood@freescale.com>
9957 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
9958 Author: Wolfgang Grandegger <wg@grandegger.com>
9959 Date: Mon Jun 2 15:09:55 2008 +0200
9961 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
9963 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
9964 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9965 Signed-off-by: Scott Wood <scottwood@freescale.com>
9967 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
9968 Author: Stefan Roese <sr@denx.de>
9969 Date: Tue Jun 10 15:34:11 2008 +0200
9971 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
9973 This patch disables the square wave output of the M41T62 RTC used on
9974 Canyonlands & Glacier. Here the explanation:
9976 The serial real-time clock part used in the design is an
9977 STMicro M41T62. This part has a full-time 32KHz square wave
9978 output that is connected to the TmrClk input to the
9979 processor. The default state for this square wave output is
9980 enabled so the output runs continuously when the board is
9981 powered normally and also from the battery. The TmrClk input
9982 to the processor goes to ground when the power is removed
9983 from the board/processor, and therefore the running square
9984 wave output is driving ground which drains the battery quickly.
9986 Signed-off-by: Stefan Roese <sr@denx.de>
9988 commit a94f22f08f280905926219e568568964cb9eeb9d
9989 Author: Andy Fleming <afleming@freescale.com>
9990 Date: Wed Jun 11 18:10:20 2008 -0500
9992 Fix build issue with string.h and linux/string.h
9995 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
9996 Author: Wolfgang Denk <wd@denx.de>
9997 Date: Fri Jun 6 14:28:14 2008 +0200
9999 tools/mkimage: fix compiler warnings on some systems.
10001 Broke building on some systems, because the host's string.h was interfering
10002 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
10003 we're building for the host, so now we only include when building inside
10006 Signed-off-by: Andy Fleming <afleming@freescale.com>
10008 commit 9973e3c614721bbf169882ffc3be266a6611cd60
10009 Author: Becky Bruce <becky.bruce@freescale.com>
10010 Date: Mon Jun 9 16:03:40 2008 -0500
10012 Change initdram() return type to phys_size_t
10014 This patch changes the return type of initdram() from long int to phys_size_t.
10015 This is required for a couple of reasons: long int limits the amount of dram
10016 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
10017 size of physical memory. phys_size_t is defined as an unsigned long on almost
10018 all current platforms.
10020 This patch *only* changes the return type of the initdram function (in
10021 include/common.h, as well as in each board's implementation of initdram). It
10022 does not actually modify the code inside the function on any of the platforms;
10023 platforms which wish to support more than 2GB of DRAM will need to modify
10024 their initdram() function code.
10026 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
10029 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10031 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
10032 Author: Becky Bruce <becky.bruce@freescale.com>
10033 Date: Mon Jun 9 20:37:18 2008 -0500
10035 Change lmb to use phys_size_t/phys_addr_t
10037 This updates the lmb code to use phys_size_t
10038 and phys_addr_t instead of unsigned long. Other code
10039 which interacts with this code, like getenv_bootm_size()
10042 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
10044 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10046 commit 61b09fc2952dc636017df4e7970e3de132276ba1
10047 Author: Becky Bruce <becky.bruce@freescale.com>
10048 Date: Mon Jun 9 20:37:17 2008 -0500
10050 Change print_size to take phys_size_t
10052 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10054 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
10055 Author: Becky Bruce <becky.bruce@freescale.com>
10056 Date: Mon Jun 9 20:37:16 2008 -0500
10058 Change bd/gd memsize/ram_size to be phys_size_t.
10060 Currently, both are defined as an unsigned long, but
10061 should be phys_size_t. This should result in no real change,
10062 since phys_size_t is currently an unsigned long for all the
10063 default configs. Also add print_lnum to cmd_bdinfo to deal
10064 with the potentially wider memsize.
10066 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10068 commit ba04f7010958e88a8910f2a123fee53fdc72e013
10069 Author: Kumar Gala <galak@kernel.crashing.org>
10070 Date: Tue Jun 10 16:16:02 2008 -0500
10072 FSL LAW: Add new interface to use the last free LAW
10074 LAWs have the concept of priority so its useful to be able to allocate
10075 the lowest (highest number) priority. We will end up using this with the
10078 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10080 commit 859a86a25c569d3665ff413d1d923394b8a961f3
10081 Author: Kumar Gala <galak@kernel.crashing.org>
10082 Date: Wed Jun 11 00:51:45 2008 -0500
10084 85xx/86xx: Move to dynamic mgmt of LAWs
10086 With the new LAW interface (set_next_law) we can move to letting the
10087 system allocate which LAWs are used for what purpose. This makes life
10088 a bit easier going forward with the new DDR code.
10090 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10091 Signed-off-by: Andy Fleming <afleming@freescale.com>
10092 Acked-by: Jon Loeliger <jdl@freescale.com>
10093 Acked-by: Becky Bruce <becky.bruce@freescale.com>
10095 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
10096 Author: Kumar Gala <galak@kernel.crashing.org>
10097 Date: Wed Jun 11 00:44:10 2008 -0500
10099 FSL LAW: Keep track of LAW allocations
10101 Make it so we keep track of which LAWs have allocated and provide
10102 a function (set_next_law) which can allocate a LAW for us if one is
10105 In the future we will move to doing more "dynamic" LAW allocation
10106 since the majority of users dont really care about what LAW number
10109 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
10111 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10112 Signed-off-by: Andy Fleming <afleming@freescale.com>
10114 commit ddde74a159caa6e18b481fec01d40b885aebb566
10115 Author: Kumar Gala <galak@kernel.crashing.org>
10116 Date: Mon Jun 9 22:31:57 2008 -0500
10118 85xx: remove dummy board_early_init_f
10120 A number of board ports have empty version of board_early_init_f
10121 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
10123 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10125 commit 81e56e9af0d43712db8efb843606a8d62eab454f
10126 Author: Kumar Gala <galak@kernel.crashing.org>
10127 Date: Mon Jun 9 18:55:38 2008 -0500
10129 MPC8544DS: Update config.h
10131 * Enable flash progress
10132 * remove CLEAR_LAW0 since we dont really use it
10134 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10136 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
10137 Author: Kumar Gala <galak@kernel.crashing.org>
10138 Date: Mon Jun 9 13:37:24 2008 -0500
10140 85xx: Remove unused and unconfigured memory test code.
10142 Remove unused and unconfigured DDR test code from FSL 85xx boards.
10143 Besides, other common code exists.
10145 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10147 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
10148 Author: Sergei Poselenov <sposelenov@emcraft.com>
10149 Date: Fri Jun 6 15:42:45 2008 +0200
10151 Socrates: Added FPGA base address update in FDT.
10153 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10155 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
10156 Author: Sergei Poselenov <sposelenov@emcraft.com>
10157 Date: Fri Jun 6 15:42:44 2008 +0200
10159 Socrates: NAND support added. Changed the U-Boot base address and
10161 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10163 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
10164 Author: Sergei Poselenov <sposelenov@emcraft.com>
10165 Date: Fri Jun 6 15:42:43 2008 +0200
10167 NAND: Added support for 128-bit OOB, adapted
10169 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10171 commit 31ca0208612f2eb57690110d7c2815953650e47b
10172 Author: Sergei Poselenov <sposelenov@emcraft.com>
10173 Date: Fri Jun 6 15:42:42 2008 +0200
10175 Socrates: added missed file with UPMA configuration data.
10177 Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
10179 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
10180 Author: Sergei Poselenov <sposelenov@emcraft.com>
10181 Date: Fri Jun 6 15:42:41 2008 +0200
10183 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
10185 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10187 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
10188 Author: Sergei Poselenov <sposelenov@emcraft.com>
10189 Date: Fri Jun 6 15:42:40 2008 +0200
10191 Added the upmconfig() function for 85xx.
10193 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10194 Signed-off-by: Andy Fleming <afleming@freescale.com>
10196 commit d39e68514ff943930ee692cff3fde03532eb7fec
10197 Author: Sergei Poselenov <sposelenov@emcraft.com>
10198 Date: Fri Jun 6 15:42:39 2008 +0200
10200 Socrates: config file cleanup.
10202 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10204 commit e8cc3f04b124f757af4528206e60d8eb715ae083
10205 Author: Wolfgang Grandegger <wg@grandegger.com>
10206 Date: Thu Jun 5 13:12:10 2008 +0200
10208 TQM85xx: Change memory map to support Flash memory > 128 MiB
10210 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
10211 memory. The current memory map only supports up to 128 MiB Flash.
10212 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
10213 set, up to 1 GiB flash is supported. To achieve this, the memory
10214 map has to be adjusted in great parts (for example the CCSRBAR is
10215 moved from 0xE0000000 to 0xA0000000).
10217 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
10218 memory map also has to be considered in the kernel (changed
10219 CCSRBAR address, changed PCI IO base address, ...). Please use
10220 an appropriate Flat Device Tree blob (tqm8548.dtb).
10222 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10223 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10225 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
10226 Author: Wolfgang Grandegger <wg@grandegger.com>
10227 Date: Thu Jun 5 13:12:09 2008 +0200
10229 TQM85xx: NAND support via local bus UPMB
10231 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
10232 default and can be enabled for the TQM8548 modules. It is now based on
10233 the re-written FSL NAND UPM driver. A patch has been posted earlier today
10236 "NAND FSL UPM: driver re-write using the hwcontrol callback"
10238 Note that the R/B pin is not supported by that module requiring to use
10239 the specified maximum delay time.
10241 Note: With NAND support enabled the size of the U-Boot image exceeds
10242 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
10243 doubling the image size :-(.
10245 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10246 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10248 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
10249 Author: Wolfgang Grandegger <wg@grandegger.com>
10250 Date: Thu Jun 5 13:12:08 2008 +0200
10252 TQM8548: PCI express support
10254 This patch adds support for PCI express cards. The board support
10255 now uses common FSL PCI init code, for both, PCI and PCIe on all
10258 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10259 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10261 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
10262 Author: Wolfgang Grandegger <wg@grandegger.com>
10263 Date: Thu Jun 5 13:12:07 2008 +0200
10265 TQM8548: Basic support for the TQM8548 modules
10267 This patch adds basic support for the TQM8548 module from TQ-Components
10268 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
10271 Furthermore Flash buffer write has been enabled to speed up output to
10272 the Flash by approx. a factor of 10.
10274 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10275 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10277 commit 25991353204c78b094c3c1fec90182dcd607ab8f
10278 Author: Wolfgang Grandegger <wg@grandegger.com>
10279 Date: Thu Jun 5 13:12:06 2008 +0200
10281 TQM85xx: Support for Flat Device Tree
10283 This patch adds support for Linux kernels using the Flat Device Tree.
10284 It also re-defines the default environment settings for booting Linux
10287 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10289 commit d9ee843d54c54776e1fdb86336ce554906a87331
10290 Author: Wolfgang Grandegger <wg@grandegger.com>
10291 Date: Thu Jun 5 13:12:05 2008 +0200
10293 TQM85xx: Support for Intel 82527 compatible CAN controller
10295 This patch adds initialization of the UPMC RAM to support up to two
10296 Intel 82527 compatible CAN controller on the TQM85xx modules.
10298 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10299 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10301 commit 518d5cfe72916323c746af1647764459914f555f
10302 Author: Wolfgang Grandegger <wg@grandegger.com>
10303 Date: Thu Jun 5 13:12:04 2008 +0200
10305 TQM85xx: Bugfix in the SDRAM initialisation
10307 The CS0_BNDS register is now set according to the detected
10310 Signed-off-by Martin Krause <martin.krause@tqs.de>
10312 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
10313 Author: Wolfgang Grandegger <wg@grandegger.com>
10314 Date: Thu Jun 5 13:12:03 2008 +0200
10316 TQM85xx: Fix chip select configuration for second FLASH bank
10318 This patch fixes the re-calculation of the automatic chip select
10319 configuration for boards with two populated FLASH banks.
10321 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10323 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
10324 Author: Wolfgang Grandegger <wg@grandegger.com>
10325 Date: Thu Jun 5 13:12:02 2008 +0200
10327 TQM85xx: Support for Spansion 'N' type flashes added
10329 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
10330 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
10331 needs to be changed -> new start address of the environment. The macro
10332 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
10333 defined for boards with 'N' type flashes.
10335 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10336 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10338 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
10339 Author: Wolfgang Grandegger <wg@grandegger.com>
10340 Date: Thu Jun 5 13:12:01 2008 +0200
10342 TQM85xx: Fix CPM port pin configuration
10344 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
10345 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
10346 as serial interface anyway. Worse, on some board variants configuring the
10347 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
10349 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10351 commit b99ba1679e8cd51b023e67098c89e606e47137d2
10352 Author: Wolfgang Grandegger <wg@grandegger.com>
10353 Date: Thu Jun 5 13:12:00 2008 +0200
10355 TQM85xx: Various coding style fixes
10357 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10359 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
10360 Author: Gerald Van Baren <vanbaren@cideas.com>
10361 Date: Tue Jun 10 22:15:58 2008 -0400
10363 libfdt: Move the working_fdt pointer to cmd_fdt.c
10365 The working_fdt pointer was declared in common/fdt_support.c but was
10366 not used there. Move it to common/cmd_fdt.c where it is used (it is
10367 also used in lib_ppc/bootm.c).
10369 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10371 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
10372 Author: Kim Phillips <kim.phillips@freescale.com>
10373 Date: Tue Jun 10 11:06:17 2008 -0500
10375 fdt: unshadow global working fdt variable
10377 differentiate with local variables of the same name by renaming the
10378 global 'fdt' variable 'working_fdt'.
10380 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10382 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
10383 Author: Andy Fleming <afleming@freescale.com>
10384 Date: Tue Jun 10 18:49:34 2008 -0500
10386 socrates: Fix PCI clk fix patch
10388 The submitted patch seems to have been more up-to-date, but an older patch was
10389 already in the repository. This patch encompasses the differences
10391 Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
10393 Signed-off-by: Andy Fleming <afleming@freescale.com>
10395 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
10396 Author: Wolfgang Grandegger <wg@grandegger.com>
10397 Date: Thu Jun 5 13:02:29 2008 +0200
10399 NAND FSL UPM: driver re-write using the hwcontrol callback
10401 This is a re-write of the NAND FSL UPM driver using the more universal
10402 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
10403 list of furher modifications:
10405 - For the time being, the UPM setup writing the UPM array has been
10406 removed from the driver and must now be done by the board specific
10409 - The bus width definition in "struct fsl_upm_nand" is now in bits to
10410 comply with the corresponding Linux driver and 8, 16 and 32 bit
10411 accesses are supported.
10413 - chip->dev_read is only set if fun->dev_ready != NULL, which is
10414 required for boards not connecting the R/B pin.
10416 - A few issue have been fixed with MxMR bit manipulation like in the
10417 corresponding Linux driver.
10419 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
10420 as well, because the address is already determined by
10421 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
10423 This patch has been tested on a TQM8548 modules with the NAND chip
10424 Micron MT29F8G08FABWP.
10426 This patch is based on the following patches posted to this list a few
10429 PPC: add accessor macros to clear and set bits in one shot
10430 83xx/85xx/86xx: add more MxMR local bus definitions
10432 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10433 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10435 commit 6beecfbb542992eede5831240cd58678274683a9
10436 Author: Wolfgang Grandegger <wg@grandegger.com>
10437 Date: Thu Jun 5 13:11:59 2008 +0200
10439 MPC85xx: Beautify boot output of L2 cache configuration
10441 The boot output is now aligned poperly with other boot output
10447 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10449 commit 398415114f0a705163a14543e9fef03f734b1ffa
10450 Author: Wolfgang Grandegger <wg@grandegger.com>
10451 Date: Wed Jun 4 12:45:22 2008 +0200
10453 PPC: add accessor macros to clear and set bits in one shot
10455 PPC: add accessor macros to clear and set bits in one shot
10457 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
10458 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
10459 They are very handy to manipulate bits it I/O registers.
10461 This patch is required for my forthcoming FSL NAND UPM driver re-write and
10462 the support for the TQM8548 module.
10464 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10466 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
10467 Author: Wolfgang Grandegger <wg@grandegger.com>
10468 Date: Wed Jun 4 13:52:17 2008 +0200
10470 TQM: move TQM boards to board/tqc
10472 Move all TQM board directories to the vendor specific directory "tqc"
10473 for modules from TQ-Components GmbH (http://www.tqc.de).
10475 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10477 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
10478 Author: Wolfgang Grandegger <wg@grandegger.com>
10479 Date: Mon Jun 2 12:09:30 2008 +0200
10481 83xx/85xx/86xx: add more MxMR local bus definitions
10483 83xx/85xx/86xx: add more MxMR local bus definitions
10485 This patch adds more macro definitions for the UPM Machine Mode Registers
10486 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
10487 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
10488 required for my forthcoming FSL NAND UPM driver re-write and the support
10489 for the TQM8548 module.
10491 This patch is based on the following two patches from Anton Vorontsov:
10493 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
10494 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
10496 I leave coding style violation fixes, code beautification and name
10497 corrections to somebody else ;-(.
10499 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10501 commit c8c5fc266e4499e283c293ccb972863156aa4134
10502 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10503 Date: Thu May 29 18:14:56 2008 +0400
10505 83xx/85xx: further localbus cleanups
10507 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
10508 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
10510 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10512 commit 42dbd667c88d496882d53e22656e89b654205492
10513 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10514 Date: Wed May 28 18:20:15 2008 +0400
10516 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
10518 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
10519 use it on MPC85xx and MPC86xx processors.
10521 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10523 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
10524 Author: Kumar Gala <galak@kernel.crashing.org>
10525 Date: Thu May 29 11:22:06 2008 -0500
10527 85xx: Add setting of cache props in the device tree.
10529 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10531 commit 4dbdb7681e243431530df0725627192a0c4aefda
10532 Author: Kumar Gala <galak@kernel.crashing.org>
10533 Date: Tue Jun 10 16:53:46 2008 -0500
10535 85xx: expose cpu identification
10537 The current cpu identification code is used just to return the name
10538 of the processor at boot. There are some other locations that the name
10539 is useful (device tree setup). Expose the functionality to other bits
10542 Also, drop the 'E' suffix and add it on by looking at the SVR version
10543 when we print this out. This is mainly to allow the most flexible use
10544 of the name. The device tree code tends to not care about the 'E' suffix.
10546 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10548 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
10549 Author: Kim Phillips <kim.phillips@freescale.com>
10550 Date: Tue Jun 10 13:25:24 2008 -0500
10552 mpc83xx: MVBLM7: minor build fixups
10554 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10556 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
10557 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
10558 Date: Tue Jun 10 09:14:05 2008 +0200
10560 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
10562 Add MPC8343 based board mvBlueLYNX-M7.
10563 It's a single board stereo camera system.
10564 Please read doc/README.mvblm7 for details.
10566 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
10567 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10569 commit c005b93925ba49f07da2aa748527996d927e172f
10570 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
10571 Date: Tue Jun 10 09:13:16 2008 +0200
10573 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
10575 Add MPC8343 based board mvBlueLYNX-M7.
10576 It's a single board stereo camera system.
10577 Please read doc/README.mvblm7 for details.
10579 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
10580 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10582 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
10583 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10584 Date: Thu May 29 18:14:56 2008 +0400
10586 83xx/85xx: further localbus cleanups
10588 move the BRx_* and ORx_* left behind in mpc85xx.h
10590 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
10591 the same, just few differences which needs some attention though).
10593 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
10594 of these defines. So this cleanup I'll leave for the "better times".
10596 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10597 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10599 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
10600 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10601 Date: Wed May 28 18:20:15 2008 +0400
10603 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
10605 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
10606 use it on MPC85xx and MPC86xx processors.
10608 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10609 Acked-by: Andy Fleming <afleming@freescale.com>
10610 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10612 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
10613 Author: Tor Krill <tor@excito.com>
10614 Date: Mon Jun 2 15:09:30 2008 +0200
10616 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
10618 Signed-off-by: Tor Krill <tor@excito.com>
10619 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10621 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
10622 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10623 Date: Mon Jun 9 23:37:44 2008 +0900
10625 net: Conditional COBJS inclusion of network drivers
10627 Replace COBJS-y with appropriate driver config names.
10629 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10630 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10632 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
10633 Author: Gerald Van Baren <vanbaren@cideas.com>
10634 Date: Mon Jun 9 21:02:17 2008 -0400
10636 Use strncmp() for the fdt command
10638 Cleaner than doing multiple conditionals on characters.
10640 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10642 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
10643 Author: Gerald Van Baren <vanbaren@cideas.com>
10644 Date: Sat Jun 7 12:25:05 2008 -0400
10646 The fdt boardsetup command criteria was not unique
10648 It was checking just for "b", which is not unique with respect to the
10649 "boot" command. Change to check for "boa"[rdsetup].
10651 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10653 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
10654 Author: David Gibson <david@gibson.dropbear.id.au>
10655 Date: Tue May 20 17:19:11 2008 +1000
10657 libfdt: Several cleanups to parameter checking
10659 This patch makes a couple of small cleanups to parameter checking of
10662 - In several functions which take a node offset, we use an
10663 idiom involving fdt_next_tag() first to check that we have indeed been
10664 given a node offset. This patch adds a helper function
10665 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
10667 - In fdt_rw.c in several places we have the expanded version
10668 of the RW_CHECK_HEADER() macro for no particular reason. This patch
10669 replaces those instances with an invocation of the macro; that's what
10672 - In fdt_sw.c we rename the check_header_sw() function to
10673 sw_check_header() to match the analgous function in fdt_rw.c, and we
10674 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
10675 functions in fdt_rw.c
10677 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
10679 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
10680 Author: Gerald Van Baren <vanbaren@cideas.com>
10681 Date: Tue Jun 3 20:34:45 2008 -0400
10683 Remove the deprecated CONFIG_OF_FLAT_TREE
10685 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
10686 cleaner, has better functionality, and is better supported.
10688 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10690 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
10691 Author: Gerald Van Baren <vanbaren@cideas.com>
10692 Date: Tue Jun 3 20:26:29 2008 -0400
10694 Change the stxxst to CONFIG_OF_LIBFDT
10696 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
10697 to CONFIG_OF_LIBFDT.
10699 WARNING: It appears that this board lost its ability to boot via a
10700 flattened device tree prior to this changeset.
10702 WARNING: This conversion was untested because I do not have a board to
10705 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10707 commit 589c04271d129729a8b01391453851ab9cc4069c
10708 Author: Gerald Van Baren <vanbaren@cideas.com>
10709 Date: Tue Jun 3 20:24:58 2008 -0400
10711 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
10713 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
10714 to CONFIG_OF_LIBFDT.
10716 WARNING: This conversion is untested because I do not have a board to
10719 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
10720 /aliases/ethernet1 property for the ethernet to work.
10722 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10724 commit ee1e35bede91debc8bff9b02f75574486033b652
10725 Author: Kumar Gala <galak@kernel.crashing.org>
10726 Date: Thu May 29 01:21:24 2008 -0500
10728 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
10730 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10732 commit 3b9519fc50802436e417c839e69df7b2016cade5
10733 Author: Becky Bruce <becky.bruce@freescale.com>
10734 Date: Wed May 14 13:10:04 2008 -0500
10736 MPC85xx: Change traps.c to not reference non-addressable memory
10738 Currently, END_OF_RAM is used by the trap code to determine if
10739 we should attempt to access the stack pointer or not. However,
10740 on systems with a lot of RAM, only a subset of the RAM is
10741 guaranteed to be mapped in and accessible. Change END_OF_RAM
10742 to use get_effective_memsize() instead of using the raw ram
10743 size out of the bd.
10745 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10747 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
10748 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10749 Date: Mon Jun 9 13:39:57 2008 +0900
10751 sh: Renesas Solutions SH7763RDP board support
10753 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
10754 In this patch, support SCIF, NOR Flash, and Ethernet.
10756 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10757 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10759 commit 60179098a95eaa972007d7ec58e4c1588029720f
10760 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10761 Date: Fri Jun 6 16:24:13 2008 +0900
10763 sh: Add support Renesas SH7763
10765 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
10766 This patch supprts CPU register's header file.
10768 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10769 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10771 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
10772 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10773 Date: Fri Jun 6 16:16:08 2008 +0900
10775 sh: SH7763 SCIF support
10777 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
10778 but only SCIF2 is different. This patch work all SCIF channel.
10780 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10781 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10783 commit 79b51ff8205f0354d5300570614c1d2db499679c
10784 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10785 Date: Sat Jun 7 20:51:59 2008 +0900
10787 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
10789 Also get rid of some #ifdefs in *.c files.
10791 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10793 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
10794 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10795 Date: Sat Jun 7 20:51:56 2008 +0900
10797 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
10801 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
10802 need to have this config as a system type specifier.
10804 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
10805 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
10807 Machine type specifiers. Each port should have one of aboves.
10809 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10811 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
10812 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
10813 Date: Fri May 30 16:05:28 2008 -0400
10815 env_nand.c: Added bad block management for environment variables
10817 Modified to check for bad blocks and to skipping over them when
10818 CFG_ENV_RANGE has been defined.
10819 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
10822 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
10823 Signed-off-by: Scott Wood <scottwood@freescale.com>
10825 commit 279726bd00558e80263d44581c44167625b7fb9a
10826 Author: Becky Bruce <becky.bruce@freescale.com>
10827 Date: Wed May 14 13:09:58 2008 -0500
10829 MPC86xx: Change traps.c to not reference non-addressable memory
10831 Currently, END_OF_RAM is used by the trap code to determine if
10832 we should attempt to access the stack pointer or not. However,
10833 on systems with a lot of RAM, only a subset of the RAM is
10834 guaranteed to be mapped in and accessible. Change END_OF_RAM
10835 to use get_effective_memsize() instead of using the raw ram
10836 size out of the bd to prevent us from trying to access
10839 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10841 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
10842 Author: Wolfgang Denk <wd@denx.de>
10843 Date: Fri Jun 6 14:28:14 2008 +0200
10845 tools/mkimage: fix compiler warnings on some systems.
10847 Signed-off-by: Wolfgang Denk <wd@denx.de>
10849 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
10850 Author: Stefan Roese <sr@denx.de>
10851 Date: Fri Jun 6 16:10:41 2008 +0200
10853 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
10855 We use upper case letters for the AMCC processor defines (like
10856 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
10857 not CONFIG_440SPe. This patch fixes the last misspelled config options.
10859 Signed-off-by: Stefan Roese <sr@denx.de>
10861 commit 72675dc6c06a48846d180106161d49dd714383cc
10862 Author: Stefan Roese <sr@denx.de>
10863 Date: Fri Jun 6 15:55:21 2008 +0200
10865 ppc4xx: Unify AMCC's board config files (part 3/3)
10867 This patch series unifies the AMCC eval board ports by introducing
10868 a common include header for all AMCC eval boards:
10870 include/configs/amcc-common.h
10872 This header now includes all common configuration options/defines which
10873 are removed from the board specific headers.
10875 The reason for this is ease of maintenance and unified look and feel
10876 of all AMCC boards.
10878 Signed-off-by: Stefan Roese <sr@denx.de>
10880 commit 490f204096d6e2c9940f67816f154a8125bab116
10881 Author: Stefan Roese <sr@denx.de>
10882 Date: Fri Jun 6 15:55:03 2008 +0200
10884 ppc4xx: Unify AMCC's board config files (part 2/3)
10886 This patch series unifies the AMCC eval board ports by introducing
10887 a common include header for all AMCC eval boards:
10889 include/configs/amcc-common.h
10891 This header now includes all common configuration options/defines which
10892 are removed from the board specific headers.
10894 The reason for this is ease of maintenance and unified look and feel
10895 of all AMCC boards.
10897 Signed-off-by: Stefan Roese <sr@denx.de>
10899 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
10900 Author: Stefan Roese <sr@denx.de>
10901 Date: Fri Jun 6 15:54:31 2008 +0200
10903 ppc4xx: Unify AMCC's board config files (part 1/3)
10905 This patch series unifies the AMCC eval board ports by introducing
10906 a common include header for all AMCC eval boards:
10908 include/configs/amcc-common.h
10910 This header now includes all common configuration options/defines which
10911 are removed from the board specific headers.
10913 The reason for this is ease of maintenance and unified look and feel
10914 of all AMCC boards.
10916 Signed-off-by: Stefan Roese <sr@denx.de>
10918 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
10919 Author: Remy Bohmer <linux@bohmer.net>
10920 Date: Thu Jun 5 13:03:36 2008 +0200
10922 DM9000 fix status check fail 0x6d error for trizeps board
10924 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
10925 the status byte need to be checked to identify a valid packet in the fifo
10927 But, The several different Application Notes do not all speak the same
10928 language on these bits. They do not disagree, but only 1 Application Note
10929 noted explicitly that only these 2 bits need to be checked.
10930 Even the datasheets do not mention anything about these 2 bits.
10932 Because the old code, and the kernel check the whole byte, I left this piece
10935 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
10938 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
10939 in the fifo) is much shorter now, compared to the older U-boot driver code,
10940 so that we can maybe run into a hardware condition now that was never seen
10941 before, or maybe was seen very unfrequently.
10943 Additionaly added a cleanup of a stack variable.
10945 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10946 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10948 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
10949 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10950 Date: Thu Jun 5 22:29:00 2008 +0900
10952 [MIPS] Update <asm/addrspace.h> header
10954 - Fix traditional KSEG names
10955 - Replace PHYSADDR with CPHYSADDR
10957 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10959 commit f0d5a6f060d00358b85c62a921a423ea8df71184
10960 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10961 Date: Thu Jun 5 22:29:00 2008 +0900
10963 [MIPS] mips_config.mk: Misc fixes
10965 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
10968 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10970 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
10971 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10972 Date: Thu Jun 5 22:29:00 2008 +0900
10974 [MIPS] Kill unused <version.h> inclusions
10976 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10978 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
10979 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10980 Date: Thu Jun 5 22:29:00 2008 +0900
10982 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
10984 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
10985 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
10986 in the U-Boot system.
10988 The other is we don't have a proper time management counter like timestamp
10989 other ARCHs have. We need the 32-bit millisecond clock counter.
10991 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
10992 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
10993 of calculated CP0 counter cycles in a CFG_HZ.
10997 * Fix improper CFG_HZ value to have 1000
10999 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
11001 * timer_init: initialize timestamp and set up the first timer expiration.
11002 Note that we don't need to initialize CP0 count/compare registers here
11003 as they have been already zeroed out on the system reset. Leave them as
11006 * get_timer: calculate how many timestamps have been passed, then return
11007 base-relative timestamp. Make sure we can easily count missed timestamps
11008 regardless of CP0 count/compare value.
11010 * get_ticks: return the current timestamp, that is get_timer(0).
11012 Most parts are from good old Linux v2.6.16 kernel.
11015 - Remove FIXME comments as they turned out to be trivial.
11016 - Use CP0 compare register as a global variable for expirelo.
11017 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
11020 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11022 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
11023 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11024 Date: Thu Jun 5 22:29:00 2008 +0900
11026 [MIPS] lib_mips/time.c: Fix udelay
11028 What we have to do is just to wait for given micro-seconds. No need to
11029 take into account current time, get_timer and CFG_HZ.
11031 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11033 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
11034 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11035 Date: Thu Jun 5 22:28:59 2008 +0900
11037 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
11039 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
11040 This patch replaces mips_{compare,count}_set and mips_count_get with
11043 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11045 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
11046 Author: Remy Bohmer <linux@bohmer.net>
11047 Date: Tue Jun 3 15:48:17 2008 +0200
11049 Get rid of annoying/superfluous bad-checksum warning message
11051 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
11052 It is annoying for ordinary users who start to doubt the network connection
11053 in general when they see messages like this.
11055 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
11056 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
11057 now before checking the checksum.
11059 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11060 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11062 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
11063 Author: Remy Bohmer <linux@bohmer.net>
11064 Date: Wed Jun 4 10:47:25 2008 +0200
11066 Fix order for reading rx-status registers in 32bit mode of DM9000
11068 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
11069 a bug in reading the rx-status registers in 32bit mode only.
11070 This patch repairs this.
11072 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11073 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11075 commit 98291e2e689096420465074cce926b226d2e71b4
11076 Author: Remy Bohmer <linux@bohmer.net>
11077 Date: Tue Jun 3 15:26:26 2008 +0200
11079 DM9000: Some minor code cleanups
11081 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
11082 need some other minor cleanup.
11084 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11085 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11087 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
11088 Author: Remy Bohmer <linux@bohmer.net>
11089 Date: Tue Jun 3 15:26:25 2008 +0200
11091 DM9000: Make driver work properly for DM9000A
11093 The DM9000A network controller does not work with the U-boot DM9000x driver.
11094 Analysis showed that many incoming packets are lost.
11096 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
11097 check for a valid rx packet be done on the interrupt status register, not
11098 directly by performing the dummy read and the rx status check as is currently
11099 the case in the u-boot driver.
11101 When the recommended poll is done as suggested the driver starts working
11102 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
11103 can be more than 1 package in the fifo at the same time.
11105 The driver must perform the rx-status check in a loop and read and handle all
11106 packages until there is no more left _after_ the interrupt RX flag is set.
11108 This change has been tested with DM9000A, DM9000E, DM9000EP.
11110 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11111 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11113 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
11114 Author: Remy Bohmer <linux@bohmer.net>
11115 Date: Tue Jun 3 15:26:24 2008 +0200
11117 DM9000: Improve eth_reset() routine
11119 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
11120 reset procedure must be done twice to properly reset the DM9000 by means of software.
11121 This errata is not needed anymore for the DM9000A, but it does not bother it.
11123 This change has been tested with DM9000A, DM9000E, DM9000EP.
11125 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11126 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11128 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
11129 Author: Remy Bohmer <linux@bohmer.net>
11130 Date: Tue Jun 3 15:26:23 2008 +0200
11132 DM9000: improve eth_send() routine
11134 The eth_send routine of the U-boot DM9000x driver does not match the
11135 DM9000 or DM9000A application notes/programming guides.
11137 This change improves the stability of the DM9000A network controller.
11139 This change has been tested with DM9000A, DM9000E, DM9000EP.
11141 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11142 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11144 commit 134e266253c02a7832560da59d394989c4f64453
11145 Author: Remy Bohmer <linux@bohmer.net>
11146 Date: Tue Jun 3 15:26:22 2008 +0200
11148 DM9000: repair debug logging
11150 It seems that the debugging code of the DM9000x driver in U-boot has not been
11151 compiled for a long time, because it cannot compile...
11153 Also rearranged some loglines to get more useful info while debugging.
11155 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11156 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11158 commit a101361bfe23c120321e45d114c0603b8e0763e9
11159 Author: Remy Bohmer <linux@bohmer.net>
11160 Date: Tue Jun 3 15:26:21 2008 +0200
11162 DM9000: Add data bus-width auto detection.
11164 The U-boot DM9000x driver contains a compile time bus-width definition for
11165 the databus connected to the network controller.
11167 This compile check makes the code unclear, inflexible and is unneccessary.
11168 It can be asked to the network controller what its bus-width is by reading bits
11169 6 and 7 of the interrupt status register.
11171 The linux kernel already uses a runtime mechanism to determine this bus-width,
11172 so the implementation below looks somewhat like that implementation.
11174 This change has been tested with DM9000A, DM9000E, DM9000EP.
11176 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11177 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11179 commit 63a0afa0c32e5f4ea98a9439542870072437404d
11180 Author: Stefan Roese <sr@denx.de>
11181 Date: Wed Jun 4 19:19:20 2008 +0200
11183 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
11185 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
11186 introduced by the commit:
11188 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
11190 With this patch SDRAM will get initialized again and booting from NAND
11193 Signed-off-by: Stefan Roese <sr@denx.de>
11194 Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
11196 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
11197 Author: Wolfgang Denk <wd@denx.de>
11198 Date: Tue May 27 14:19:30 2008 +0200
11200 Socrates: Fix PCI bus frequency report
11202 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
11204 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
11205 Author: Tor Krill <tor@excito.com>
11206 Date: Thu May 29 11:10:30 2008 +0200
11208 Fix incorrect switch for IF_TYPE in part.c
11210 Use correct field in block_dev_desc_t when writing interface type in
11211 dev_print. Error introduced in 574b3195.
11213 Also added fix from Martin Krause
11215 Signed-off-by: Tor Krill <tor@excito.com>
11217 commit b64b8a0bd310935b70af69ac970952f2b364ae56
11218 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
11219 Date: Tue May 27 10:25:39 2008 +0200
11221 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
11223 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
11225 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
11226 Author: Peter Tyser <ptyser@xes-inc.com>
11227 Date: Thu May 22 18:56:52 2008 -0500
11229 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
11231 Removed unneeded command line history initialization. Also, the original
11232 code would access the 'initted' variable before relocation to SDRAM
11233 which resulted in erratic behavior since the bss is not initialized when
11234 executing from flash.
11236 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11238 commit 22f371b63038a4ecab04068877c1089e51a01ba1
11239 Author: Grant Erickson <gerickson@nuovations.com>
11240 Date: Wed May 21 13:28:30 2008 -0700
11242 PPC4xx: Simplified post_word_{load, store}
11244 This patch simplifies post_word_{load,store} by using the preprocessor
11245 to eliminate redundant, copy-and-pasted code.
11247 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11249 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
11250 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
11251 Date: Wed May 7 21:25:33 2008 +0400
11253 cfi_flash: enable M18 flash chips family support.
11255 Added new command set ID. Buffered write command processing is changed
11256 in order to support M18 flash chips family.
11258 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
11259 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
11261 commit 93c56f212ccdadc182018f0769cb284426b88f1d
11262 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
11263 Date: Wed May 7 21:24:44 2008 +0400
11265 cfi_flash: support of long cmd in U-boot.
11267 Some NOR flash chips needs support of commands with length grether than max
11268 value size of uchar. For example all M18 family chips use 0x1ff command in
11269 buffered write mode as value of program loops count.
11271 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
11272 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
11274 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
11275 Author: Stefan Roese <sr@denx.de>
11276 Date: Fri May 16 11:06:06 2008 +0200
11278 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
11280 On AD7414 the first value upon bootup is not read correctly.
11281 This is most likely because of the 800ms update time of the
11282 temp register in normal update mode. To get current values
11283 each time we issue the "dtt" command including upon powerup
11284 we switch into one-short mode.
11286 This patch fixes the problem on AD7414 equipped boards (Sequoia,
11287 Canyonlands etc), that temp value printed in the bootup log was
11290 Signed-off-by: Stefan Roese <sr@denx.de>
11292 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
11293 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11294 Date: Fri May 30 16:55:06 2008 +0200
11296 ppc4xx: Cleanup CPCI405 variant's config file
11298 This patch removes some dead code from CPCI405 board's
11299 config files. JFFS2 support is also removed. It's not used and
11300 CPCI4052 does not build anymore without some size reduction.
11302 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11304 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
11305 Author: Kenneth Johansson <kenneth@southpole.se>
11306 Date: Thu May 29 16:32:33 2008 +0200
11308 Remove shell variable UNDEF_SYM.
11310 UNDEF_SYM is a shell variable in the main Makefile used to force the
11311 linker to add all u-boot commands to the final image. It has no use here.
11313 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
11315 commit 8c66497e06bf803489c589df58ee591d71033274
11316 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11317 Date: Fri May 16 11:10:35 2008 +0200
11319 Add support for environment in SPI flash
11321 This is pretty incomplete...it doesn't handle reading the environment
11322 before relocation, it doesn't support redundant environment, and it
11323 doesn't support embedded environment. But apart from that, it does
11326 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11328 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
11329 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11330 Date: Fri May 16 11:10:34 2008 +0200
11332 SPI Flash: Add "sf" command
11334 This adds a new command, "sf" which can be used to manipulate SPI
11335 flash. Currently, initialization, reading, writing and erasing is
11338 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11340 commit d25ce7d24cc0f93881559f4009175ea305af65e8
11341 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11342 Date: Fri May 16 11:10:33 2008 +0200
11344 SPI Flash subsystem
11346 This adds a new SPI flash subsystem.
11348 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
11349 but some preliminary support for other flash types is in place as
11352 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11354 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
11355 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
11356 Date: Fri May 16 11:10:32 2008 +0200
11358 atmel_spi: Driver for the Atmel SPI controller
11360 This adds a driver for the SPI controller found on most AT91 and AVR32
11361 chips, implementing the new SPI API.
11364 - Update to new API
11365 - Handle zero-length transfers appropriately. The user may send a
11366 zero-length SPI transfer with SPI_XFER_END set in order to
11367 deactivate the chip select after a series of transfers with chip
11368 select active. This is useful e.g. when polling the status
11369 register of DataFlash.
11371 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11373 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
11374 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11375 Date: Fri May 16 11:10:31 2008 +0200
11377 SPI API improvements
11379 This patch gets rid of the spi_chipsel table and adds a handful of new
11380 functions that makes the SPI layer cleaner and more flexible.
11382 Instead of the spi_chipsel table, each board that wants to use SPI
11383 gets to implement three hooks:
11384 * spi_cs_activate(): Activates the chipselect for a given slave
11385 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
11386 * spi_cs_is_valid(): Determines if the given bus/chipselect
11387 combination can be activated.
11389 Not all drivers may need those extra functions however. If that's the
11390 case, the board code may just leave them out (assuming they know what
11391 the driver needs) or rely on the linker to strip them out (assuming
11392 --gc-sections is being used.)
11394 To set up communication parameters for a given slave, the driver needs
11395 to call spi_setup_slave(). This returns a pointer to an opaque
11396 spi_slave struct which must be passed as a parameter to subsequent SPI
11397 calls. This struct can be freed by calling spi_free_slave(), but most
11398 driver probably don't want to do this.
11400 Before starting one or more SPI transfers, the driver must call
11401 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
11402 the hardware. When all transfers are done, the driver must call
11403 spi_release_bus() to make the bus available to others, and possibly
11404 shut down the SPI controller hardware.
11406 spi_xfer() behaves mostly the same as before, but it now takes a
11407 spi_slave parameter instead of a spi_chipsel function pointer. It also
11408 got a new parameter, flags, which is used to specify chip select
11409 behaviour. This may be extended with other flags in the future.
11411 This patch has been build-tested on all powerpc and arm boards
11412 involved. I have not tested NIOS since I don't have a toolchain for it
11413 installed, so I expect some breakage there even though I've tried
11414 fixing up everything I could find by visual inspection.
11416 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
11417 DataFlash drivers posted as a follow-up. I'd like some help testing
11418 other boards that use the existing SPI API.
11420 But most of all, I'd like some comments on the new API. Is this stuff
11421 usable for everyone? If not, why?
11424 - Build fixes for various boards, drivers and commands
11425 - Provide common struct spi_slave definition that can be extended by
11427 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
11428 - Make default bus and mode build-time configurable
11429 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
11432 - Add opaque struct spi_slave for controller-specific data associated
11434 - Add spi_claim_bus() and spi_release_bus()
11435 - Add spi_free_slave()
11436 - spi_setup() is now called spi_setup_slave() and returns a
11438 - soft_spi now supports four SPI modes (CPOL|CPHA)
11439 - Add bus parameter to spi_setup_slave()
11440 - Convert the new i.MX32 SPI driver
11441 - Convert the new MC13783 RTC driver
11444 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
11447 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11448 Tested-by: Guennadi Liakhovetski <lg@denx.de>
11450 commit 289011207d999b2e4085150d2aa30d547ad9b800
11451 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11452 Date: Fri May 16 11:10:30 2008 +0200
11454 Move definition of container_of() to common.h
11456 AVR32 and AT91SAM9 both have their own identical definitions of
11457 container_of() taken from the Linux kernel. Move it to common.h so
11458 that all architectures can use it.
11460 container_of() is already used by some drivers, and will be used
11461 extensively by the new and improved SPI API.
11463 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11465 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
11466 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11467 Date: Fri May 16 11:08:11 2008 +0200
11469 soft_i2c: Pull SDA high before reading
11471 Spotted by Dean Capindale.
11473 Systems that support open-drain GPIO properly are allowed provide an
11474 empty I2C_TRISTATE define. However, this means that we need to be
11475 careful not to drive SDA low when the slave is expected to respond.
11477 This patch adds a missing I2C_SDA(1) to read_byte() required to
11478 tristate the SDA line on systems that support open-drain GPIO.
11480 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11482 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
11483 Author: Stefan Roese <sr@denx.de>
11484 Date: Mon May 19 11:34:53 2008 +0200
11486 ppc4xx: Remove implementations of testdram()
11488 This patch removes the used testdram() implementations of the board
11489 that are maintained by myself.
11491 Signed-off-by: Stefan Roese <sr@denx.de>
11493 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
11494 Author: Stefan Roese <sr@denx.de>
11495 Date: Mon Jun 2 17:37:28 2008 +0200
11497 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
11499 Historically the 405 U-Boot port had a dram_init() call in early init
11500 stage. This function was still called from start.S and most of the time
11501 coded in assembler. This is not needed anymore (since a long time) and
11502 boards should implement the common initdram() function in C instead.
11504 This patch now removed the dram_init() call from start.S and removes the
11505 empty implementations that are scattered through most of the 405 board
11506 ports. Some older board ports really implement this dram_init() though.
11516 I changed those boards to call this assembler dram_init() function now
11517 from their board specific initdram() instead. This *should* work, but please
11518 test again on those platforms. And it is perhaps a good idea that those
11519 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
11520 some time. So further patches welcome here.
11522 Signed-off-by: Stefan Roese <sr@denx.de>
11524 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
11525 Author: Stefan Roese <sr@denx.de>
11526 Date: Mon Jun 2 17:22:11 2008 +0200
11528 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
11530 Signed-off-by: Stefan Roese <sr@denx.de>
11532 commit 39b32be18cd33b53a84065edcd4e465165cc5564
11533 Author: Stefan Roese <sr@denx.de>
11534 Date: Mon Jun 2 17:20:03 2008 +0200
11536 ppc4xx: Fix common ECC generation code for 440GP style platforms
11538 This patch makes the common 4xx ECC code really usable on 440GP style
11541 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
11542 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
11543 we need to make some processor dependant defines used later on by the
11546 Signed-off-by: Stefan Roese <sr@denx.de>
11548 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
11549 Author: Stefan Roese <sr@denx.de>
11550 Date: Mon Jun 2 17:13:55 2008 +0200
11552 ppc4xx: Change Kilauea to use the common DDR2 init function
11554 This patch changes the kilauea and kilauea_nand (for NAND booting)
11555 board port to not use a board specific DDR2 init routine anymore. Now
11556 the common code from cpu/ppc4xx is used.
11558 Thanks to Grant Erickson for all his basic work on this 405EX early
11561 Signed-off-by: Stefan Roese <sr@denx.de>
11563 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
11564 Author: Stefan Roese <sr@denx.de>
11565 Date: Mon Jun 2 14:59:21 2008 +0200
11567 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
11569 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
11570 ppc4xx related SDRAM/DDR/DDR2 controller defines.
11572 Signed-off-by: Stefan Roese <sr@denx.de>
11574 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
11575 Author: Stefan Roese <sr@denx.de>
11576 Date: Mon Jun 2 14:57:41 2008 +0200
11578 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
11580 This patch removes all SDRAM related defines from the PPC4xx headers
11581 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
11582 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
11584 It also introduces new defines for the equipped SDRAM controller based on
11585 which PPC variant is used. There new defines are:
11587 used on 405GR/CR/EP and some Xilinx Virtex boards.
11589 used on 440GP/GX/EP/GR.
11591 used on 440EPx/GRx.
11593 used on 405EX/r/440SP/SPe/460EX/GT.
11595 Signed-off-by: Stefan Roese <sr@denx.de>
11597 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
11598 Author: Stefan Roese <sr@denx.de>
11599 Date: Mon Jun 2 14:35:44 2008 +0200
11601 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
11603 This patch consolidates the 405 and 440 parts of the NAND booting code
11604 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
11605 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
11606 Only *after* running from this location, nand_boot() is called.
11608 Please note that the initsdram() call is now moved from nand_boot.c
11609 to start.S. I experienced problems with some boards like Kilauea
11610 (405EX), which don't have internal SRAM (OCM) and relocation needs to
11611 be done to SDRAM before the NAND controller can get accessed. When
11612 initdram() is called later on in nand_boot(), this can lead to problems
11613 with variables in the bss sections like nand_ecc_pos[].
11615 Signed-off-by: Stefan Roese <sr@denx.de>
11616 Acked-by: Scott Wood <scottwood@freescale.com>
11618 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
11619 Author: Grant Erickson <gerickson@nuovations.com>
11620 Date: Thu May 22 14:44:24 2008 -0700
11622 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
11624 This patch (Part 2 of 2):
11626 * Rolls up a suite of changes to enable correct primordial stack and
11627 global data handling when the data cache is used for such a purpose
11628 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
11630 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
11631 eliminating redundant ECC initialization implementations and moving
11632 redundant SDRAM initialization out of board code into shared 4xx
11635 * Enables MCSR visibility on the 405EX(r).
11637 * Enables the use of the data cache for initial RAM on
11638 both AMCC's Kilauea and Makalu and removes a redundant
11639 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
11641 - Removed, per Stefan Roese's request, defunct memory.c file for
11642 Makalu and rolled sdram_init from it into makalu.c.
11644 With respect to the 4xx DDR initialization and ECC unification, there
11645 is certainly more work that can and should be done (file renaming,
11646 etc.). However, that can be handled at a later date on a second or
11647 third pass. As it stands, this patch moves things forward in an
11648 incremental yet positive way for those platforms that utilize this
11649 code and the features associated with it.
11651 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11652 Signed-off-by: Stefan Roese <sr@denx.de>
11654 commit c821b5f120bedf73867513466412587c6912a8f8
11655 Author: Grant Erickson <gerickson@nuovations.com>
11656 Date: Thu May 22 14:44:14 2008 -0700
11658 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
11660 This patch (Part 1 of 2):
11662 * Rolls up a suite of changes to enable correct primordial stack and
11663 global data handling when the data cache is used for such a purpose
11664 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
11666 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
11667 eliminating redundant ECC initialization implementations and moving
11668 redundant SDRAM initialization out of board code into shared 4xx
11671 * Enables MCSR visibility on the 405EX(r).
11673 * Enables the use of the data cache for initial RAM on
11674 both AMCC's Kilauea and Makalu and removes a redundant
11675 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
11677 - Removed, per Stefan Roese's request, defunct memory.c file for
11678 Makalu and rolled sdram_init from it into makalu.c.
11680 With respect to the 4xx DDR initialization and ECC unification, there
11681 is certainly more work that can and should be done (file renaming,
11682 etc.). However, that can be handled at a later date on a second or
11683 third pass. As it stands, this patch moves things forward in an
11684 incremental yet positive way for those platforms that utilize this
11685 code and the features associated with it.
11687 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11688 Signed-off-by: Stefan Roese <sr@denx.de>
11690 commit a439680019e06171d4a5694b7992accce87f590e
11691 Author: Grant Erickson <gerickson@nuovations.com>
11692 Date: Wed May 21 13:28:30 2008 -0700
11694 PPC4xx: Simplified post_word_{load, store}
11696 This patch simplifies post_word_{load,store} by using the preprocessor
11697 to eliminate redundant, copy-and-pasted code.
11699 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11701 commit f979690ee337450b2030aba128f95b7a8d9881c0
11702 Author: Kumar Gala <galak@kernel.crashing.org>
11703 Date: Thu May 15 15:13:08 2008 -0500
11705 Fix warnings from gcc-4.3.0 build on a ppc host
11707 * The cfi_flash.c memset fix actual allows the board to boot so there is
11708 a bit more going on here than just resolving warnings associated with
11709 uninitialized variables.
11711 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
11712 inline function 'ext2_find_next_zero_bit' which is not static
11714 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11716 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
11717 Author: Becky Bruce <becky.bruce@freescale.com>
11718 Date: Wed May 14 13:09:51 2008 -0500
11720 MPC512x: Change traps.c to not reference non-addressable memory
11722 Currently, END_OF_RAM is used by the trap code to determine if
11723 we should attempt to access the stack pointer or not. However,
11724 on systems with a lot of RAM, only a subset of the RAM is
11725 guaranteed to be mapped in and accessible. Change END_OF_RAM
11726 to use get_effective_memsize() instead of using the raw ram
11727 size out of the bd.
11729 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11731 commit 81673e9ae14b771cd13faf19947192599cae3959
11732 Author: Kumar Gala <galak@kernel.crashing.org>
11733 Date: Tue May 13 19:01:54 2008 -0500
11735 Make sure common.h is the first include.
11737 If common.h isn't first we can get CONFIG_ options defined in the
11738 board config file ignored. This can cause an issue if any of those
11739 config options impact the size of types of data structures
11740 (eg CONFIG_PHYS_64BIT).
11742 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11744 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
11745 Author: Marian Balakowicz <m8@semihalf.com>
11746 Date: Tue May 13 15:53:29 2008 +0200
11748 Avoid initrd and logbuffer area overlaps
11750 Add logbuffer to reserved LMB areas to prevent initrd allocation
11751 from overlaping with it.
11753 Make sure to use correct logbuffer base address.
11755 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11757 commit 6956d53d9934862507f83f0e3255dfd4662e7482
11758 Author: Sascha Laue <sascha.laue@liebherr.com>
11759 Date: Tue May 13 13:29:54 2008 +0200
11761 lwmon5: add memory-pattern-test to FPGA POST.
11763 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
11764 Author: Becky Bruce <becky.bruce@freescale.com>
11765 Date: Thu May 8 19:02:51 2008 -0500
11767 PPC: 86xx Add bat registers to reginfo command
11769 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11771 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
11772 Author: Becky Bruce <becky.bruce@freescale.com>
11773 Date: Fri May 9 15:41:35 2008 -0500
11775 PPC: Add print_bats() to lib_ppc/bat_rw.c
11777 This function prints the values of all the BAT register
11778 pairs - I needed this for debug earlier this week; adding it to
11779 lib_ppc so others can use it (and add it to reginfo commands
11782 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11784 commit c148f24c15743a02e855636e6bed013bd121f7f2
11785 Author: Becky Bruce <becky.bruce@freescale.com>
11786 Date: Thu May 15 21:29:04 2008 -0500
11788 PPC: Change lib_ppc/bat_rw.c to use high bats
11790 Currently, this code only deals with BATs 0-3, which makes
11791 it useless on systems that support BATs 4-7. Add the
11792 support for these registers.
11794 Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
11796 commit 31d826722434931e1152a09d140187dcf72f8aac
11797 Author: Becky Bruce <becky.bruce@freescale.com>
11798 Date: Thu May 8 19:02:12 2008 -0500
11800 PPC: Create and use CONFIG_HIGH_BATS
11802 Change all code that conditionally operates on high bat
11803 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
11804 instead of the myriad ways this is done now. Define the option
11805 for every config for which high bats are supported (and
11806 enabled by early boot, on parts where they're not always
11809 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11811 commit aa3b8bf9c30065bb2ea852799d32db5020598495
11812 Author: Wolfgang Grandegger <wg@grandegger.com>
11813 Date: Wed May 28 19:55:19 2008 +0200
11815 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
11817 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
11818 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11820 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
11821 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11822 Date: Wed May 28 13:06:25 2008 -0500
11824 ColdFire: Add 10 base ethernet support for mcf5445x
11826 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11827 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11829 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
11830 Author: Jason McMullan <mcmullan@netapp.com>
11831 Date: Fri May 30 00:53:38 2008 +0900
11833 mips: Add an 'include/asm/errno.h', like all other architectures
11835 All other u-boot architectures have an include/asm/errno.h, so
11836 this change adds it to the mips include/asm-mips headers also.
11838 Stolen from Linux 2.6.25.
11840 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
11842 commit e2ad8426624bac457acc6925b6ff408e9bf20466
11843 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11844 Date: Fri May 30 00:53:38 2008 +0900
11846 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
11848 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11850 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
11851 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11852 Date: Fri May 30 00:53:38 2008 +0900
11854 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
11856 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11858 commit bf462ae450a7f2eeeddc699ed345b391e3263540
11859 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11860 Date: Fri May 30 00:53:37 2008 +0900
11862 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
11864 No functional changes.
11866 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11868 commit 89a1550ec6b74452274a7a23127936e2c7eec711
11869 Author: Jason McMullan <mcmullan@netapp.com>
11870 Date: Fri May 30 00:53:37 2008 +0900
11872 mips: If CONFIG_CMD_SPI is defined, call spi_init()
11874 The mips architecture currently does not call 'spi_init()' in the generic
11875 board initialization routine is CONFIG_CMD_SPI is defined.
11877 This patch rectifies that problem.
11879 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
11880 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11882 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
11883 Author: Jason McMullan <mcmullan@netapp.com>
11884 Date: Fri May 30 00:53:37 2008 +0900
11886 [MIPS] lib_mips/board.c: Add nand_init
11888 This patch adds the standard 'nand_init()' call to the mips generic
11889 'board_init_r()' call, bringing MIPS in line with the other architectures.
11891 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
11892 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11894 commit d6ac2ed893c2168738aee01579d6283af8d37045
11895 Author: Scott Wood <scottwood@freescale.com>
11896 Date: Thu May 22 10:49:46 2008 -0500
11898 Remove prototypes of nand_init() in favor of including nand.h.
11900 Likewise with onenand_init().
11902 Signed-off-by: Scott Wood <scottwood@freescale.com>
11904 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
11905 Author: Scott Wood <scottwood@freescale.com>
11906 Date: Thu May 22 10:49:00 2008 -0500
11908 Make onenand_uboot.h self-sufficient.
11910 Don't assume types are provided by previously included headers.
11912 Signed-off-by: Scott Wood <scottwood@freescale.com>
11914 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
11915 Author: Dirk Behme <dirk.behme@gmail.com>
11916 Date: Wed Jan 16 14:26:59 2008 +0100
11918 nand: Correct NAND erase percentage output
11920 For NAND erase sizes smaller than one NAND erase block, erase
11921 percentage output becomes grater than 100% e.g.
11925 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
11926 > nand erase 0x100000 0x2000
11927 NAND erase: device 0 offset 0x100000, size 0x2000
11928 Erasing at 0x100000 -- 200% complete.
11933 Correct this and give user a warning that more is erased than specified:
11936 > nand erase 0x100000 0x2000
11937 NAND erase: device 0 offset 0x100000, size 0x2000
11938 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
11939 Erasing 0x00004000 instead
11940 Erasing at 0x100000 -- 100% complete.
11945 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
11947 commit 5922db6c0948506be91e0de44e7a6863a18a417f
11948 Author: Stelian Pop <stelian@popies.net>
11949 Date: Tue May 13 17:31:24 2008 +0200
11951 Cleanup nand_info[] declaration.
11953 The nand_info array is declared as extern in several .c files.
11954 Those days, nand.h contains a reference to the array, so there is
11955 no need to declare it elsewhere.
11957 Signed-off-by: Stelian Pop <stelian@popies.net>
11958 Signed-off-by: Scott Wood <scottwood@freescale.com>
11960 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
11961 Author: Scott Wood <scottwood@freescale.com>
11962 Date: Mon May 19 09:30:43 2008 -0500
11964 NAND: Provide a sane default for NAND_MAX_CHIPS.
11966 This allows the header to be included regardless of whether a board's
11967 config file provides NAND-related defininitions.
11969 Signed-off-by: Scott Wood <scottwood@freescale.com>
11971 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
11972 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11973 Date: Mon May 26 12:19:10 2008 +0200
11975 avr32: Fix theoretical race in udelay()
11977 If the specified delay is very short, the cycle counter may go past the
11978 "end" time we are waiting for before we get around to reading it.
11980 Fix it by checking the different between the cycle count "now" and the
11981 cycle count at the beginning. This will work as long as the delay
11982 measured in number of cycles is below 2^31.
11984 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11986 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
11987 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11988 Date: Wed May 21 13:01:09 2008 +0200
11990 avr32: Compile atmel_mci.o conditionally
11992 Remove #ifdef CONFIG_MMC from the source file and use conditional
11993 compilation in the Makefile instead.
11995 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11997 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
11998 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11999 Date: Thu May 22 12:28:25 2008 +0200
12001 avr32: Fix wrong error flags in atmel_mci driver
12003 Make sure we check for CRC errors when sending commands that use CRC
12006 Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
12007 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12009 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
12010 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12011 Date: Wed May 21 11:10:59 2008 +0200
12013 avr32: Fix two warnings in atmel_mci.c
12015 The warnings are harmless but annoying. Let's fix them.
12017 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12019 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
12020 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12021 Date: Mon May 19 11:36:28 2008 +0200
12023 avr32: Rework SDRAM initialization code
12025 This cleans up the SDRAM initialization and related code a bit, and
12026 allows faster booting.
12028 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
12029 * Remove memory test from sdram_init() and make caller responsible
12030 for verifying the SDRAM and determining its size.
12031 * Remove base_address member from struct sdram_config (was sdram_info)
12032 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
12033 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
12035 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12037 commit 95107b7c028806919630bf02c653aa8f4f867c94
12038 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12039 Date: Mon May 19 11:27:37 2008 +0200
12041 avr32: Do stricter stack checking in the exception handler
12043 Don't do a stack dump if the stack pointer is outside the memory area
12044 reserved for stack.
12046 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12048 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
12049 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12050 Date: Fri May 2 15:32:57 2008 +0200
12052 avr32: Use the same entry point for reset and exception handling
12054 Since the reset vector is always aligned to a very large boundary, we
12055 can save a couple of KB worth of alignment padding by placing the
12056 exception vectors at the same address.
12058 Deciding which one it is is easy: If we're handling an exception, the
12059 CPU is in Exception mode. If we're starting up after reset, the CPU is
12060 in Supervisor mode. So this adds a very minimal overhead to the reset
12061 path (only executed once) and the exception handling path (normally
12062 never executed at all.)
12064 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12066 commit 0c16eed2189a190bd5655b33c029f809a9b31128
12067 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12068 Date: Fri May 2 15:24:22 2008 +0200
12070 avr32: Put memset in its own section
12072 All C code is compiled with -ffunction-sections -fdata-sections.
12073 Assembly functions should get their own sections as well so that
12074 everything looks consistent.
12076 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12078 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
12079 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12080 Date: Fri May 2 15:21:40 2008 +0200
12082 avr32: Rename pm_init() as clk_init() and make SoC-specific
12084 pm_init() was always more about clock initialization than anything
12085 else. Dealing with PLLs, clock gating and such is also inherently
12086 SoC-specific, so move it into a SoC-specific directory.
12088 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12090 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
12091 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12092 Date: Wed Apr 30 16:15:57 2008 +0200
12094 avr32: Use new-style Makefile for the at32ap platform
12096 This makes it easier to avoid compiling certain files later.
12098 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12100 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
12101 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12102 Date: Wed Apr 30 14:36:47 2008 +0200
12104 avr32: Remove unused file cpu/at32ap/pm.c
12106 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12108 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
12109 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12110 Date: Wed Apr 30 14:19:28 2008 +0200
12112 avr32: Clean up the HMATRIX code
12114 Rework the HMATRIX configuration interface so that it becomes easier
12115 to configure the HMATRIX for boards with special needs, and add new
12118 The HMATRIX header file has been split into a general,
12119 chip-independent part with register definitions, etc. and a
12120 chip-specific part with SFR bitfield definitions and master/slave
12123 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12125 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
12126 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12127 Date: Thu Nov 22 12:14:11 2007 +0100
12129 avr32: Add support for the ATSTK1006 board
12131 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
12132 board. It's currently in production and will be available soon.
12134 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12136 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
12137 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12138 Date: Tue Apr 29 12:53:05 2008 +0200
12140 avr32: Get rid of the .flashprog section
12142 The .flashprog section was only needed back when we were running
12143 directly from flash, and it's even more useless on NGW100 since it
12144 uses the CFI flash driver which never used this workaround in the
12147 Remove it on STK1000 as well, and get rid of all the associated code and
12150 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12152 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
12153 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12154 Date: Wed Apr 30 13:09:56 2008 +0200
12156 avr32: Use correct condition around macb clock accessors
12158 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
12159 the chip has a MACB controller, not when it has a USART.
12161 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12163 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
12164 Author: David Brownell <david-b@pacbell.net>
12165 Date: Wed Apr 16 22:57:58 2008 -0700
12167 avr32: Disable the AP7000 internal watchdog on startup
12169 This patch forces the watchdog off in all cases. That will at least
12170 get rid of the constant reboot cycle, though it won't let the watchdog
12171 actually run in the new kernels: its probe() comes up with a polite
12174 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12176 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
12177 Author: David Brownell <david-b@pacbell.net>
12178 Date: Fri Feb 22 12:54:39 2008 -0800
12180 avr32: stk1002 and ngw100 convergence
12182 Make STK1002 and NGW100 boards act more alike:
12183 - STK boards can use as many arguments as NGW
12184 - STK boards don't need to manage FPGAs either
12185 - NGW commands should match STK ones
12187 Also spell U-Boot right in prompts for STK1002 and NGW100.
12189 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
12190 [haavard.skinnemoen@atmel.com: update STK100[34] as well]
12191 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12193 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
12194 Author: Sergei Poselenov <sposelenov@emcraft.com>
12195 Date: Tue May 27 13:47:00 2008 +0200
12197 Socrates: Fix PCI bus frequency report
12199 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12201 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
12202 Author: Sergei Poselenov <sposelenov@emcraft.com>
12203 Date: Tue May 27 11:49:13 2008 +0200
12205 Socrates: Added USB support.
12207 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12209 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
12210 Author: Sergei Poselenov <sposelenov@emcraft.com>
12211 Date: Tue May 27 11:35:02 2008 +0200
12213 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
12215 In case of several PCI USB controllers on a board this variable
12216 specifys which controller to use.
12217 See doc/README.generic_usb_ohci for details.
12219 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12221 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
12222 Author: Sergei Poselenov <sposelenov@emcraft.com>
12223 Date: Tue May 27 10:36:07 2008 +0200
12225 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
12227 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12229 commit 83e9d7a2614d4006b92690afa3390c291734267e
12230 Author: Sergei Poselenov <sposelenov@emcraft.com>
12231 Date: Mon May 26 18:16:04 2008 +0200
12233 Socrates: Config file cleanup.
12235 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12237 commit 602cac1389b755b223272f2328a47e6f8c240848
12238 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12239 Date: Sat May 24 12:47:46 2008 +0200
12241 MAKEALL: add at91 list
12243 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12245 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
12246 Author: Ron Madrid <ron_madrid@sbcglobal.net>
12247 Date: Fri May 23 15:37:05 2008 -0700
12249 Add Marvell 88E1118 support for TSEC
12251 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
12252 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12254 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
12255 Author: Jens Gehrlein <sew_s@tqs.de>
12256 Date: Mon May 5 14:06:11 2008 +0200
12258 smc911x: add 16 bit support
12260 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
12261 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12263 commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
12264 Author: Christian Eggers <ceggers@gmx.de>
12265 Date: Wed May 21 21:29:10 2008 +0200
12267 Fix endianess conversion in usb_ohci.c
12269 Sorry, I forgot this line:
12271 Signed-off-by: Christian Eggers <ceggers@gmx.de>
12273 I think this must be swapped (result may be equal).
12275 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
12276 Author: Christian Eggers <ceggers@gmx.de>
12277 Date: Wed May 21 22:12:00 2008 +0200
12279 USB: replace old swap_ with proper endianess conversion macros
12281 Signed-off-by: Christian Eggers <ceggers@gmx.de>
12282 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12284 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
12285 Author: Christian Eggers <ceggers@gmx.de>
12286 Date: Wed May 21 21:29:10 2008 +0200
12288 Fix endianess conversion in usb_ohci.c
12290 Signed-off-by: Christian Eggers <ceggers@gmx.de>
12291 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12293 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
12294 Author: Sergei Poselenov <sposelenov@emcraft.com>
12295 Date: Thu May 22 01:15:53 2008 +0200
12297 USB: add support for multiple PCI OHCI controllers
12299 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
12300 In case of several PCI USB controllers on a board this variable
12301 specifys which controller to use.
12303 Also add USB support for sokrates board.
12305 See doc/README.generic_usb_ohci for details.
12307 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12308 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12310 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
12311 Author: Wolfgang Denk <wd@denx.de>
12312 Date: Wed May 21 16:56:08 2008 +0200
12314 Fix some whitespace issues
12316 introduced by 53677ef18 "Big white-space cleanup."
12318 Signed-off-by: Wolfgang Denk <wd@denx.de>
12320 commit 4416603aeb06861b468b06a981e52c3ff805db7b
12321 Author: York Sun <yorksun@freescale.com>
12322 Date: Mon May 12 14:36:39 2008 -0500
12324 Make ads5121 out-of-tree compiling safe
12326 Reuse the existing DIU driver in board/freescale/common.
12328 Signed-off-by: York Sun <yorksun@freescale.com>
12330 commit 0e1bad47cd345c76c91a64caf41011e431b62599
12331 Author: York Sun <yorksun@freescale.com>
12332 Date: Mon May 5 10:20:01 2008 -0500
12334 Adding DIU support for Freescale 5121ADS
12336 Add DIU and cfb console support to FSL 5121ADS board.
12338 Use #define CONFIG_VIDEO in config file to enable fb console.
12340 Signed-off-by: York Sun <yorksun@freescale.com>
12342 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
12343 Author: York Sun <yorksun@freescale.com>
12344 Date: Mon May 5 10:20:00 2008 -0500
12346 Replace DPRINTF with debug
12348 Remove DPRINTF macro and replace it with generic debug macro.
12350 Signed-off-by: York Sun <yorksun@freescale.com>
12352 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
12353 Author: York Sun <yorksun@freescale.com>
12354 Date: Mon May 5 10:19:59 2008 -0500
12356 Move pixel clock setting to board file
12358 The clock divider has different format in 5121 and 8610. This patch moves it to
12359 board specific code.
12361 Signed-off-by: York Sun <yorksun@freescale.com>
12363 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
12364 Author: Wolfgang Denk <wd@denx.de>
12365 Date: Tue May 20 16:00:29 2008 +0200
12367 Big white-space cleanup.
12369 This commit gets rid of a huge amount of silly white-space issues.
12370 Especially, all sequences of SPACEs followed by TAB characters get
12371 removed (unless they appear in print statements).
12373 Also remove all embedded "vim:" and "vi:" statements which hide
12374 indentation problems.
12376 Signed-off-by: Wolfgang Denk <wd@denx.de>
12378 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
12379 Author: Sergei Poselenov <sposelenov@emcraft.com>
12380 Date: Thu May 8 17:46:23 2008 +0200
12382 socrates: fix second TSEC configuration (it is actually TSEC3)
12384 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12386 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
12387 Author: Sergei Poselenov <sposelenov@emcraft.com>
12388 Date: Thu May 8 14:17:08 2008 +0200
12390 Fixed reset for socrates
12392 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12394 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
12395 Author: Sergei Poselenov <sposelenov@emcraft.com>
12396 Date: Wed May 7 15:10:49 2008 +0200
12398 socrates: changes to support FDT
12400 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12401 Signed-off-by: Wolfgang Denk <wd@denx.de>
12403 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
12404 Author: Sergei Poselenov <sposelenov@emcraft.com>
12405 Date: Wed Apr 30 11:42:50 2008 +0200
12407 Initial support for "Socrates" board
12409 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12411 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
12412 Author: Yuri Tikhonov <yur@emcraft.com>
12413 Date: Thu May 8 15:46:42 2008 +0200
12415 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
12417 This way we become able to utilize the full post_log_word for POST
12418 activities (overwise, POST ECC, which has 0x8000 ID, could be
12419 erroneously treated as started in post_output_backlog() even if there
12420 was actually no POST ECC run (because of OCM POST failure, for
12423 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12425 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
12426 Author: Yuri Tikhonov <yur@emcraft.com>
12427 Date: Thu May 8 15:46:02 2008 +0200
12429 POST: mark OCM test as POST_STOP
12431 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12433 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
12434 Author: Yuri Tikhonov <yur@emcraft.com>
12435 Date: Thu May 8 15:45:26 2008 +0200
12437 POST: add POST_STOP flag
12439 Don't run futher tests in case of a test fails that is marked as
12442 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12443 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12445 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
12446 Author: Yuri Tikhonov <yur@emcraft.com>
12447 Date: Thu May 8 15:44:16 2008 +0200
12449 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
12451 Switch the OCM testid with the codec one. The reason is that current
12452 implementation requires the POST_ROM testid to fit into lower 16
12453 bits, and the codec test will never run with POST_ROM hopefully.
12455 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12457 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
12458 Author: Yuri Tikhonov <yur@emcraft.com>
12459 Date: Thu May 8 15:43:28 2008 +0200
12461 lwmon5: enable OCM post test on lwmon5 board
12463 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12465 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
12466 Author: Yuri Tikhonov <yur@emcraft.com>
12467 Date: Thu May 8 15:42:47 2008 +0200
12469 POST: OCM test added.
12471 Added OCM test to POST layer. This version runs before all other tests
12472 but doesn't yet interrupt post sequence on failure.
12474 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12475 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12477 commit 6891260bdd935a382c95d9fa333922b0dfded68a
12478 Author: Yuri Tikhonov <yur@emcraft.com>
12479 Date: Thu May 8 15:40:39 2008 +0200
12483 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12485 commit 727f63334676e760877d43bfb8f0e9331ac8b101
12486 Author: Hebbar <gururajakr@sanyo.co.in>
12487 Date: Tue May 20 02:16:36 2008 -0700
12489 common/usb.c: fix incorrect escape sequence
12491 Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
12493 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
12494 Author: York Sun <yorksun@freescale.com>
12495 Date: Thu May 15 15:26:27 2008 -0500
12497 Fix 8313ERDB board configuration
12499 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
12500 Correct TSEC1 vs TSEC2 assignment.
12501 Define ETHADDR and ETH1ADDR always.
12503 Signed-off-by: York Sun <yorksun@freescale.com>
12504 Signed-off-by: Timur Tabi <timur@freescale.com>
12506 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
12507 Author: Jon Loeliger <jdl@freescale.com>
12508 Date: Mon May 19 09:47:25 2008 -0500
12510 mpc86xx: Removed unused and unconfigured memory test code.
12512 Besides, other common code exists.
12514 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12516 commit 180a90abdae72587c0f679edf8991455e559440d
12517 Author: Wolfgang Denk <wd@denx.de>
12518 Date: Mon May 19 12:47:11 2008 +0200
12522 Update CHANGELOG for release.
12524 Signed-off-by: Wolfgang Denk <wd@denx.de>
12526 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
12527 Author: Stefan Roese <sr@denx.de>
12528 Date: Mon May 19 07:14:38 2008 +0200
12530 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
12532 When SATA is selected (via jumper J6) we need to disable the first PCIe
12533 node in the device tree, so that Linux doesn't initialize it. Otherwise
12534 the Linux SATA driver will fail to detect the devices.
12536 The same goes the other way around too. So if PCIe is selected we need
12537 to disable the SATA node in the device tree.
12539 This is because PCIe port 0 and SATA on 460EX share the same pins
12540 (multiplexed) and we have to configure in U-Boot which peripheral is
12543 Signed-off-by: Stefan Roese <sr@denx.de>
12545 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
12546 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12547 Date: Sun May 18 19:09:58 2008 +0200
12549 i386: Fix multiple definitions of __show_boot_progress
12551 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12553 commit 311f3446930c1e64c12026c1cfd00500b05be52d
12554 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12555 Date: Sun May 18 19:09:57 2008 +0200
12557 sc530_spunk: add missing SOBJS entry
12559 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12561 commit a559317143b4f95927b08cd388707e6f077e95fa
12562 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12563 Date: Sun May 18 19:09:56 2008 +0200
12565 sc520_spunk: Fix flash
12567 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
12568 flash.c:398: error: label at end of compound statement
12570 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12572 commit 91f221317af64191ee8caf303ea9305943158691
12573 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12574 Date: Sun May 18 19:09:49 2008 +0200
12576 drivers/pcmcia: add missing i82365
12578 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12580 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
12581 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12582 Date: Sun May 18 19:09:47 2008 +0200
12584 i386/bootm: remove unused var
12586 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12588 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
12589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12590 Date: Sun May 18 19:09:45 2008 +0200
12592 example/gitignore: update with all generated examples
12594 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12596 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
12597 Author: Wolfgang Denk <wd@denx.de>
12598 Date: Thu May 15 00:42:45 2008 +0200
12600 TQM8272: fix out-of-tree building
12602 ...and add to MAKEALL script
12604 Signed-off-by: Wolfgang Denk <wd@denx.de>
12606 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
12607 Author: Wolfgang Denk <wd@denx.de>
12608 Date: Wed May 14 23:34:53 2008 +0200
12610 environment: fix bug introduced by commit a8409f4f1ac8
12612 env_get_char is not a function, but a pointer to one.
12614 Signed-off-by: Wolfgang Denk <wd@denx.de>
12616 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
12617 Author: Gary Jennejohn <garyj@denx.de>
12618 Date: Wed May 14 13:39:22 2008 +0200
12620 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
12622 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
12623 use a redundant environment.
12625 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12627 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
12628 Author: Wolfgang Denk <wd@denx.de>
12629 Date: Wed May 14 13:55:30 2008 +0200
12631 Fix config files for out-of-tree building
12633 Several board/<...>/config.mk files include dynamically built (by
12634 the Makefile) config files but used the wrong file name of
12635 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
12636 instead if the correct
12637 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
12639 The bug is nasty because the build result is correct for the (normal)
12640 in-tree builds, and because 'sinclude' is used no errors get raised
12641 even for out-of-tree build tests. But out-of-tree builds use an
12642 incomplete and thus usually incorrect configuration...
12644 Signed-off-by: Wolfgang Denk <wd@denx.de>
12646 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
12647 Author: Stefan Roese <sr@denx.de>
12648 Date: Wed May 14 13:40:03 2008 +0200
12650 ppc4xx: Fix bogus Canyonlands config.mk
12652 This patch fixes the canyonlands config.mk file to enable correct
12653 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
12655 Signed-off-by: Stefan Roese <sr@denx.de>
12657 commit fdd1247a66d788a3446244f6fde9955a93c26322
12658 Author: Stefan Roese <sr@denx.de>
12659 Date: Wed May 14 10:32:32 2008 +0200
12661 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
12663 Canyonlands has a file ddr2_fixed.c which needs special treatment when
12664 building in separate directory. It has to be linked to build directory
12665 otherwise it is not seen.
12667 Signed-off-by: Stefan Roese <sr@denx.de>
12669 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
12670 Author: Wolfgang Denk <wd@denx.de>
12671 Date: Wed May 14 12:22:49 2008 +0200
12673 environment: cleanup prototype declarations of env functions.
12675 Signed-off-by: Wolfgang Denk <wd@denx.de>
12677 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
12678 Author: Wolfgang Denk <wd@denx.de>
12679 Date: Wed May 14 12:21:48 2008 +0200
12681 linkstation_HGLAN: Fix out of tree building.
12683 Signed-off-by: Wolfgang Denk <wd@denx.de>
12685 commit 085551c05ca09e6c491ea11a1c6727a36776a545
12686 Author: Stefan Roese <sr@denx.de>
12687 Date: Wed May 14 10:32:32 2008 +0200
12689 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
12691 Canyonlands has a file ddr2_fixed.c which needs special treatment when
12692 building in separate directory. It has to be linked to build directory
12693 otherwise it is not seen.
12695 Signed-off-by: Stefan Roese <sr@denx.de>
12697 commit 1510b82d50615f344e89d42533e8224cce067dc0
12698 Author: Wolfgang Denk <wd@denx.de>
12699 Date: Tue May 13 23:15:52 2008 +0200
12701 Makefile: fix "error: version_autogenerated.h: No such file or directory"
12703 Signed-off-by: Wolfgang Denk <wd@denx.de>
12705 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
12706 Author: Stelian Pop <stelian@popies.net>
12707 Date: Tue May 13 17:31:24 2008 +0200
12709 Cleanup nand_info[] declaration.
12711 The nand_info array is declared as extern in several .c files.
12712 Those days, nand.h contains a reference to the array, so there is
12713 no need to declare it elsewhere.
12715 Signed-off-by: Stelian Pop <stelian@popies.net>
12716 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12718 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
12719 Author: Stefan Roese <sr@denx.de>
12720 Date: Tue May 13 20:22:01 2008 +0200
12722 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
12724 Signed-off-by: Stefan Roese <sr@denx.de>
12726 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
12727 Author: Wolfgang Denk <wd@denx.de>
12728 Date: Mon May 12 01:11:21 2008 +0200
12730 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
12732 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
12733 which broke many PowerPC boards.
12735 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
12736 Author: Wolfgang Denk <wd@denx.de>
12737 Date: Mon May 12 00:56:28 2008 +0200
12739 Revert "Avoid initrd and logbuffer area overlaps"
12741 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
12742 which breaks building on all PPC boards that don't use a log buffer.
12744 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
12745 Author: Nick Spence <nick.spence@freescale.com>
12746 Date: Sat May 10 14:02:04 2008 -0700
12748 Fix offset calculation for multi-type legacy images.
12750 Calculation of tail was incorrect when size % 4 == 0.
12752 New code removes the conditional and does the same thing but with arithmetic
12754 Signed-off-by: Nick Spence <nick.spence@freescale.com>
12756 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
12757 Author: Wolfgang Denk <wd@denx.de>
12758 Date: Mon May 12 00:40:58 2008 +0200
12760 Revert "Change env_get_char from a global function ptr to a function."
12762 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
12763 which is known to break booting from dataflash and NAND.
12765 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
12766 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12767 Date: Sun May 11 23:13:57 2008 +0200
12769 API: remove duplicate syscall check
12771 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12773 commit 67e3beb52c320b0a31cf030716c99392cde2d532
12774 Author: Stelian Pop <stelian@popies.net>
12775 Date: Fri May 9 21:46:51 2008 +0200
12777 AT91: Cleanup unused config header file definitions.
12779 CONFIG_ENV_OVERWRITE is commented out in the config header files,
12780 so let's cleanup the files by removing the whole definition.
12782 Signed-off-by: Stelian Pop <stelian@popies.net>
12783 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12785 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
12786 Author: Stelian Pop <stelian@popies.net>
12787 Date: Thu May 8 14:52:34 2008 +0200
12789 Support AT91CAP9 revC CPUs
12791 The AT91CAP9 revC CPU has a few differences over the previous,
12792 revB CPU which was distributed in small quantities only (revA was
12793 an internal Atmel product only).
12795 The revC silicon needs a special initialisation sequence to
12796 switch from the internal (imprecise) RC oscillator to the
12797 external 32k clock.
12799 Signed-off-by: Stelian Pop <stelian@popies.net>
12800 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12802 commit 098b7b4b441b12c2a64dd517930f43c793542759
12803 Author: Stelian Pop <stelian@popies.net>
12804 Date: Thu May 8 14:52:33 2008 +0200
12806 Use custom logo for Atmel boards
12808 This patch adds a custom vendor logo for the Atmel AT91 boards.
12810 Signed-off-by: Stelian Pop <stelian@popies.net>
12811 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12813 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
12814 Author: Stelian Pop <stelian@popies.net>
12815 Date: Thu May 8 14:52:32 2008 +0200
12817 AT91SAM9RLEK: hook up the ATMEL LCD driver
12819 This patch makes the necessary adaptations (PIO configurations and
12820 defines in config header file) to hook up the Atmel LCD driver to the
12821 AT91SAM9RLEK board.
12823 Signed-off-by: Stelian Pop <stelian@popies.net>
12824 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12826 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
12827 Author: Stelian Pop <stelian@popies.net>
12828 Date: Thu May 8 14:52:31 2008 +0200
12830 AT91SAM9263EK: hook up the ATMEL LCD driver
12832 This patch makes the necessary adaptations (PIO configurations and
12833 defines in config header file) to hook up the Atmel LCD driver to the
12834 AT91SAM9263EK board.
12836 Signed-off-by: Stelian Pop <stelian@popies.net>
12837 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12839 commit 820f2a958325061a446115f3035e48e4726b3390
12840 Author: Stelian Pop <stelian@popies.net>
12841 Date: Thu May 8 14:52:30 2008 +0200
12843 AT91SAM9261EK: hook up the ATMEL LCD driver
12845 This patch makes the necessary adaptations (PIO configurations and
12846 defines in config header file) to hook up the Atmel LCD driver to the
12847 AT91SAM9261EK board.
12849 Signed-off-by: Stelian Pop <stelian@popies.net>
12850 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12852 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
12853 Author: Stelian Pop <stelian@popies.net>
12854 Date: Thu May 8 14:52:29 2008 +0200
12856 AT91CAP9ADK: hook up the ATMEL LCD driver
12858 This patch makes the necessary adaptations (PIO configurations and
12859 defines in config header file) to hook up the Atmel LCD driver to the
12862 Signed-off-by: Stelian Pop <stelian@popies.net>
12863 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12865 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
12866 Author: Stelian Pop <stelian@popies.net>
12867 Date: Fri May 9 21:57:18 2008 +0200
12869 Add ATMEL LCD driver
12871 This patch adds support for the ATMEL LCDC driver which is used on some
12872 AT91 and AVR platforms.
12874 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
12875 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
12877 Signed-off-by: Stelian Pop <stelian@popies.net>
12878 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12880 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
12881 Author: Stelian Pop <stelian@popies.net>
12882 Date: Thu May 8 18:52:25 2008 +0200
12884 AT91SAM9RLEK support
12886 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
12889 Signed-off-by: Stelian Pop <stelian@popies.net>
12890 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12892 commit 8e429b3eee23927c1222679f6b6f53667b21595c
12893 Author: Stelian Pop <stelian@popies.net>
12894 Date: Thu May 8 18:52:23 2008 +0200
12896 AT91SAM9263EK support
12898 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
12901 Signed-off-by: Stelian Pop <stelian@popies.net>
12902 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12904 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
12905 Author: Stelian Pop <stelian@popies.net>
12906 Date: Thu May 8 20:52:22 2008 +0200
12908 AT91SAM9261EK support
12910 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
12913 Signed-off-by: Stelian Pop <stelian@popies.net>
12914 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12916 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
12917 Author: Stelian Pop <stelian@popies.net>
12918 Date: Thu May 8 20:52:21 2008 +0200
12920 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
12922 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
12923 in order to cope with the changes in DataFlash partitionning scheme
12926 Signed-off-by: Stelian Pop <stelian@popies.net>
12927 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12929 commit 96996ac25d5222611a8888968db6e53a6d3726da
12930 Author: Stelian Pop <stelian@popies.net>
12931 Date: Thu May 8 20:52:20 2008 +0200
12933 AT91SAM9260EK: Normalize BOOTARGS
12935 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
12936 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
12939 Signed-off-by: Stelian Pop <stelian@popies.net>
12940 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12942 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
12943 Author: Stelian Pop <stelian@popies.net>
12944 Date: Thu May 8 20:52:19 2008 +0200
12946 AT91SAM9260EK: Normalize SPI timings
12948 This patch changes the SPI timings to closely match the ones
12949 used by the Linux kernel and the Atmel's own bootstrap project.
12951 Signed-off-by: Stelian Pop <stelian@popies.net>
12952 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12954 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
12955 Author: Stelian Pop <stelian@popies.net>
12956 Date: Thu May 8 20:52:18 2008 +0200
12958 AT91SAM9260EK: Handle 8 or 16 bit NAND
12960 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
12961 makes the support configurable in the board config header file
12962 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
12964 Signed-off-by: Stelian Pop <stelian@popies.net>
12965 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12967 commit ab52640fc01624e208424e527af0b7b3a5a65a12
12968 Author: Stelian Pop <stelian@popies.net>
12969 Date: Thu May 8 20:52:17 2008 +0200
12971 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
12973 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
12974 in order to cope with the changes in DataFlash partitionning scheme
12977 Signed-off-by: Stelian Pop <stelian@popies.net>
12978 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12980 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
12981 Author: Stelian Pop <stelian@popies.net>
12982 Date: Thu May 8 20:52:16 2008 +0200
12984 AT91CAP9ADK: Normalize BOOTARGS
12986 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
12987 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
12990 Signed-off-by: Stelian Pop <stelian@popies.net>
12991 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12993 commit 93da48b910511911ce110656e17ed733c8ac4c45
12994 Author: Stelian Pop <stelian@popies.net>
12995 Date: Thu May 8 20:52:15 2008 +0200
12997 AT91CAP9ADK: Normalize SPI timings
12999 This patch changes the SPI timings to closely match the ones
13000 used by the Linux kernel and the Atmel's own bootstrap project.
13002 Signed-off-by: Stelian Pop <stelian@popies.net>
13003 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13005 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
13006 Author: Stelian Pop <stelian@popies.net>
13007 Date: Thu May 8 20:52:14 2008 +0200
13009 AT91CAP9ADK: Handle 8 or 16 bit NAND
13011 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
13012 makes the support configurable in the board config header file
13013 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
13015 Signed-off-by: Stelian Pop <stelian@popies.net>
13016 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13018 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
13019 Author: Stelian Pop <stelian@popies.net>
13020 Date: Thu May 8 20:52:13 2008 +0200
13022 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
13024 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
13025 below avoids the duplication of u-boot.lds by putting the file in the
13026 cpu directory instead of the board one.
13028 Signed-off-by: Stelian Pop <stelian@popies.net>
13029 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13031 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
13032 Author: Stelian Pop <stelian@popies.net>
13033 Date: Thu May 8 20:52:12 2008 +0200
13035 Add proper copyright notices in Atmel boards Makefiles
13037 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
13038 copyright notice. This patch adds the missing pieces.
13040 Signed-off-by: Stelian Pop <stelian@popies.net>
13041 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13043 commit e817a042cef6164bf26fee86f90326f2ec9e6745
13044 Author: Stelian Pop <stelian@popies.net>
13045 Date: Thu May 8 20:52:11 2008 +0200
13047 Add copyright information in Atmel boards partition.c
13049 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
13050 the new created files. This patch fixes the problem.
13052 Signed-off-by: Stelian Pop <stelian@popies.net>
13053 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13055 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
13056 Author: Stelian Pop <stelian@popies.net>
13057 Date: Thu May 8 20:52:10 2008 +0200
13059 Update origin and copyright information in arch-at91sam9 header files
13061 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
13062 copied from the Linux kernel sources. This patch explicitly specifies
13063 this origin for all the copied headers, and for those missing copyright
13064 information, adds it.
13066 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
13067 in the latest kernel sources by 'at91sam9_smc.h'.
13069 The copyright information has been confirmed by the AT91 Linux kernel
13070 maintainer, Andrew Victor <avictor.za@gmail.com>.
13072 Signed-off-by: Stelian Pop <stelian@popies.net>
13073 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13075 commit 79dd1712689d6a5031d7cbff54957049680751c7
13076 Author: Markus Klotzbücher <mk@denx.de>
13077 Date: Thu May 8 16:00:55 2008 +0200
13079 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
13081 When using dhcp/bootp the "netmask" environment variable is not set
13082 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
13083 desireable, so the following patch adds this this option to the board
13086 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13087 Signed-off-by: Stefan Roese <sr@denx.de>
13089 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
13090 Author: Stefan Roese <sr@denx.de>
13091 Date: Sat May 10 10:30:36 2008 +0200
13093 ppc4xx: Update Makalu defconfig to use device-tree booting as default
13095 This patch reworks the default environment on Makalu. Now "net_nfs" for
13096 example uses the device-tree style booting formerly know as "net_nfs_fdt".
13097 Also the addresses in RAM were changed because of the new image booting
13098 support, which check for image overwriting. So the addresses needed to
13101 Signed-off-by: Stefan Roese <sr@denx.de>
13103 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
13104 Author: Becky Bruce <bgill@freescale.com>
13105 Date: Wed May 7 13:28:16 2008 -0500
13107 PPC: fix map_physmem build warning
13109 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
13110 enabled. This quiets the warning.
13112 Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
13114 commit 36f32675f40292002ee1fed252c180a43022d2d4
13115 Author: Becky Bruce <bgill@freescale.com>
13116 Date: Wed May 7 13:24:57 2008 -0500
13118 Update pci code to use phys_addr_t
13120 Physical addrs need to be represented by phys_addr_t, not
13121 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
13122 are going to fail mightily.
13124 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13126 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
13127 Author: Nick Spence <nick.spence@freescale.com>
13128 Date: Thu May 8 22:32:22 2008 -0700
13130 Support legacy multi-type images without FDT section.
13132 This patch enables legacy multi-type images containing only a Linux kernel
13133 and root file system to be loaded, maintaining compatibility with previous
13134 versions of u-boot.
13136 This is required when using old image files such as a Linux 2.4 kernel /
13139 Signed-off-by: Nick Spence <nick.spence@freescale.com>
13140 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
13142 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
13143 Author: Wolfgang Denk <wd@denx.de>
13144 Date: Sat May 10 00:38:02 2008 +0200
13148 Signed-off-by: Wolfgang Denk <wd@denx.de>
13150 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
13151 Author: Wolfgang Denk <wd@denx.de>
13152 Date: Sat May 10 00:36:09 2008 +0200
13154 post/cpu/ppc4xx/Makefile: line length cleanup
13156 Signed-off-by: Wolfgang Denk <wd@denx.de>
13158 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
13159 Author: Stelian Pop <stelian@popies.net>
13160 Date: Thu May 8 22:52:09 2008 +0200
13162 Fix @ -> <at> substitution
13164 When applying the AT91CAP9 patches upstream, something transformed
13165 the '@' character into the ' <at> ' sequence.
13167 The patch below restores the original form in all the places where
13168 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
13169 were copied from AT91CAP9, and a couple of other files where the
13170 ' <at> ' sequence was present).
13172 Signed-off-by: Stelian Pop <stelian@popies.net>
13174 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
13175 Author: Stelian Pop <stelian@popies.net>
13176 Date: Thu May 8 22:52:10 2008 +0200
13178 Update origin and copyright information in arch-at91sam9 header files
13180 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
13181 copied from the Linux kernel sources. This patch explicitly specifies
13182 this origin for all the copied headers, and for those missing copyright
13183 information, adds it.
13185 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
13186 in the latest kernel sources by 'at91sam9_smc.h'.
13188 The copyright information has been confirmed by the AT91 Linux kernel
13189 maintainer, Andrew Victor <avictor.za@gmail.com>.
13191 Signed-off-by: Stelian Pop <stelian@popies.net>
13193 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
13194 Author: Stelian Pop <stelian@popies.net>
13195 Date: Thu May 8 22:52:11 2008 +0200
13197 Add copyright information in Atmel boards partition.c
13199 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
13200 the new created files. This patch fixes the problem.
13202 Signed-off-by: Stelian Pop <stelian@popies.net>
13204 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
13205 Author: Guennadi Liakhovetski <lg@denx.de>
13206 Date: Thu May 8 10:09:27 2008 +0200
13208 mx31ads: fix 32kHz clock handling
13210 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
13211 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
13212 Also fix a typo when verifying a jumper configuration. While at it, make
13213 two needlessly global functions static.
13215 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
13217 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
13218 Author: Marian Balakowicz <m8@semihalf.com>
13219 Date: Wed May 7 13:10:04 2008 +0200
13221 Avoid initrd and logbuffer area overlaps
13223 Add logbuffer to reserved LMB areas to prevent initrd allocation
13224 from overlaping with it.
13226 Make sure to use correct logbuffer base address.
13228 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13230 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
13231 Author: Marian Balakowicz <m8@semihalf.com>
13232 Date: Wed May 7 13:08:54 2008 +0200
13234 ppc: Cleanup get_effective_memsize() use
13236 Removed duplicated effective memory size calculation code.
13238 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13240 commit 273c37d843d5b581090378016cd12dd9c586907b
13241 Author: Marian Balakowicz <m8@semihalf.com>
13242 Date: Wed May 7 09:03:53 2008 +0200
13244 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
13246 Recent modifcations to LOGBUFFER handling code were incorrecly
13247 introduced to fit_check_kernel() routine during
13248 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
13249 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
13251 This patch cleans up this merge issue.
13253 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13255 commit bc11756daff89a3de09ca80adac962b88cf06e6e
13256 Author: Grant Erickson <gerickson@nuovations.com>
13257 Date: Tue May 6 20:16:15 2008 -0700
13259 Propagate Error Status to the Shell on fw_printenv Errors
13261 Changed implementation such that fw_printenv returns failure status
13262 when one or more specified variables do not exist or when incorrect
13263 command syntax is used.
13265 This aids scripting fw_printenv such that the script can key of the
13266 return status rather than relying on standard error "scraping".
13268 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13269 Signed-off-by: Wolfgang Denk <wd@denx.de>
13271 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
13272 Author: Grant Erickson <gerickson@nuovations.com>
13273 Date: Tue May 6 16:18:00 2008 -0700
13275 Fix Compilation Errors with 'tools/env/fw_printenv'
13277 In the current top-of-tree, 1.3.3.-rc2, the optional tool
13278 'tools/env/fw_printenv' fails to compile for two reasons:
13280 1) The header watchdog.h cannot be found.
13281 2) The header zlib.h is picked up from the tool chain rather than the
13282 project causing a prototype conflict for crc32.
13284 This patch addresses both of these issues.
13286 Platforms Tested On:
13289 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13291 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
13292 Author: James Yang <James.Yang@freescale.com>
13293 Date: Mon May 5 10:22:53 2008 -0500
13295 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
13297 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
13298 work before relocating to RAM because command history is written into
13299 a global array that is not writable before relocation. This patch
13300 defers to the no-editing and no-history code in readline_into_buffer()
13301 if it is called before relocation.
13303 Signed-off-by: James Yang <James.Yang@freescale.com>
13304 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13306 commit 726c0f1e5f108dccea052965123b95837d2bd402
13307 Author: Detlev Zundel <dzu@denx.de>
13308 Date: Mon May 5 16:11:22 2008 +0200
13310 cosmetic: Adjust coding style for switch statements to be consistent
13312 Signed-off-by: Detlev Zundel <dzu@denx.de>
13314 commit 574b319512b13e10800f0045e39b993f4ca25e42
13315 Author: Detlev Zundel <dzu@denx.de>
13316 Date: Mon May 5 16:11:21 2008 +0200
13318 Fix disk type output in disk/part.c
13320 Signed-off-by: Detlev Zundel <dzu@denx.de>
13322 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
13323 Author: Vlad Lungu <vlad.lungu@windriver.com>
13324 Date: Mon May 5 14:20:03 2008 +0300
13326 Mail address change, documentation modified
13328 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
13330 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
13331 Author: Michal Simek <monstr@monstr.eu>
13332 Date: Sun May 4 15:42:41 2008 +0200
13334 microblaze: Repare intc handling
13336 Signed-off-by: Michal Simek <monstr@monstr.eu>
13338 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
13339 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13340 Date: Sun May 4 15:17:52 2008 +0200
13342 include/gitignore: update to all architectures
13344 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13346 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
13347 Author: Marcel Ziswiler <marcel@ziswiler.com>
13348 Date: Mon May 5 02:12:06 2008 +0200
13350 ide: Remove spurious second include of io.h
13352 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
13354 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13356 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
13357 Author: Adrian Filipi <adrian.filipi@eurotech.com>
13358 Date: Tue May 6 16:46:37 2008 -0400
13362 This patch fixes three typos.
13363 The first is a repetition of CONFIG_CMD_BSP.
13364 The second makes the #endif comment match its #if.
13365 The third is a spelling error.
13367 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
13369 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
13370 Author: Grant Erickson <gerickson@nuovations.com>
13371 Date: Sun May 4 16:45:01 2008 -0700
13373 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
13375 Add support for the recognition of 'powerpc' as an alias for the PowerPC
13376 architecture type since Linux is already trending in that direction,
13377 preferring 'powerpc' to 'ppc'.
13379 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13381 commit f5a24259190c388c2527bdc49fee34577d862cc7
13382 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
13383 Date: Fri May 2 13:35:15 2008 -0700
13385 7450 and 86xx L2 cache invalidate bug corrections
13387 The 7610 and related parts have an L2IP bit in the L2CR that is
13388 monitored to signal when the L2 cache invalidate is complete whereas the
13389 7450 and related parts utilize L2I for this purpose. However, the
13390 current code does not account for this difference. Additionally the 86xx
13391 L2 cache invalidate code used an "andi" instruction where an "andis"
13392 instruction should have been used.
13394 This patch addresses both of these bugs.
13396 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
13397 Acked-By: Jon Loeliger <jdl@freescale.com>
13399 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
13400 Author: Wolfgang Denk <wd@denx.de>
13401 Date: Fri May 9 10:16:13 2008 +0200
13403 Avoid infinite loop "Generating include/autoconf.mk"
13405 Fix a bogus circular dependency that caused an infinite loop of
13406 "Generating include/autoconf.mk" again and again.
13408 Signed-off-by: Wolfgang Denk <wd@denx.de>
13410 commit 567fb852178dbf59529d7301620a3f3732a4b02d
13411 Author: Stelian Pop <stelian@popies.net>
13412 Date: Thu May 8 22:52:09 2008 +0200
13414 Fix @ -> <at> substitution
13416 When applying the AT91CAP9 patches upstream, something transformed
13417 the '@' character into the ' <at> ' sequence.
13419 The patch below restores the original form in all the places where
13420 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
13421 were copied from AT91CAP9, and a couple of other files where the
13422 ' <at> ' sequence was present).
13424 Signed-off-by: Stelian Pop <stelian@popies.net>
13425 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13427 commit 73ccb3410a0785593cda7aee455dfc51f790e281
13428 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
13429 Date: Mon Apr 28 14:04:32 2008 +0200
13431 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
13433 Signed-off-by: Gary Jennejohn <garyj@denx.de>
13434 Signed-off-by: Stefan Roese <sr@denx.de>
13436 commit ef2642625cbfb1c3695e3478d08ae515052a4950
13437 Author: Stefan Roese <sr@denx.de>
13438 Date: Thu May 8 11:10:46 2008 +0200
13440 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
13442 Signed-off-by: Stefan Roese <sr@denx.de>
13444 commit a00eccfebc954ad9485161efeca7d9aaf626d530
13445 Author: Stefan Roese <sr@denx.de>
13446 Date: Thu May 8 11:05:15 2008 +0200
13448 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
13450 This patch adds fdt (flattened device tree) support to all remaining AMCC
13451 eval boards. Most newer boards already support device tree. With this patch,
13452 all AMCC boards now enable device tree passing from U-Boot to Linux
13453 arch/powerpc kernels.
13455 Signed-off-by: Stefan Roese <sr@denx.de>
13457 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
13458 Author: Stefan Roese <sr@denx.de>
13459 Date: Thu May 8 11:01:09 2008 +0200
13461 ppc4xx: Add weak default ft_board_setup() routine
13463 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
13464 This routine is defined as weak and can be overwritten by a board specific
13467 Signed-off-by: Stefan Roese <sr@denx.de>
13469 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
13470 Author: Stefan Roese <sr@denx.de>
13471 Date: Thu May 8 10:48:58 2008 +0200
13473 ppc4xx: acadia: Add fdt support and fix section overlap problem
13475 This patch adds fdt (flattened device tree) support to the AMCC
13476 Acadia eval board. This increases the image size and it doesn't
13477 fit anymore into 256kByte. Since we didn't want to remove features
13478 from the configuration, we decided to increase the U-Boot image size
13479 (add one flash sector).
13481 Also changed the default environment definition to make it
13482 independent of such changes.
13484 Signed-off-by: Stefan Roese <sr@denx.de>
13486 commit 4adb3023de75bc150f088c8935db340930ad38c8
13487 Author: Ira Snyder <iws@ovro.caltech.edu>
13488 Date: Tue Apr 29 11:18:54 2008 -0700
13490 ppc4xx: Add device tree support to AMCC Yosemite
13492 Add support for booting with a device tree blob. This is needed to boot
13493 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
13494 via the ethaddr variable.
13496 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
13497 Signed-off-by: Stefan Roese <sr@denx.de>
13499 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
13500 Author: Dave Mitchell <dmitchell@amcc.com>
13501 Date: Wed May 7 09:00:23 2008 -0700
13503 ppc4xx: Fix typos in 460GT/EX FBDV array
13505 Corrected two typos in the 460GT/EX FBDV array.
13507 Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
13508 Signed-off-by: Stefan Roese <sr@denx.de>
13510 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
13511 Author: Andy Fleming <afleming@freescale.com>
13512 Date: Wed May 7 16:54:31 2008 -0500
13514 85xx: Limit CPU2 workaround to parts that have the errata
13516 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
13517 Signed-off-by: Andy Fleming <afleming@freescale.com>
13519 commit a5fe514e8ace564300d2c1d73846ddff49654243
13520 Author: Lee Nipper <lee.nipper@freescale.com>
13521 Date: Fri Apr 25 15:44:45 2008 -0500
13523 mpc83xx: system performance settings for MPC8349EMDS.
13525 These same settings are used on MPC8349ITX, and
13526 improve performance on MPC8349EMDS.
13528 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
13529 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13531 commit 49387dba910e485640b575e920ee463b7e611dc3
13532 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13533 Date: Tue May 6 13:22:52 2008 +0900
13535 [MIPS] cpu/mips/cache.S: Fix build warning
13537 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
13538 warns illegal global symbol references by bal (and jal also) instruction.
13539 This does not happen with the latest binutils v2.18.
13541 Here's an example on gth2_config:
13543 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
13544 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
13545 c -EB -c -o cache.o cache.S
13546 cache.S: Assembler messages:
13547 cache.S:243: Warning: Pretending global symbol used as branch target is local.
13548 cache.S:250: Warning: Pretending global symbol used as branch target is local.
13550 In principle, gas might be sensitive to global symbol references in PIC
13551 code because they should be processed through GOT (global offset table).
13552 But if `bal' instruction is used, it results in PC-based offset jump.
13553 This is the cause of this warning.
13555 In practice, we know it doesn't matter whether PC-based reference or GOT-
13556 based. As for this case, both will work before/after relocation. But let's
13559 This patch explicitly sets up a target address, then jump there.
13560 Here's an example of disassembled code with/without this patch.
13562 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
13563 9000066c: ac80fffc sw zero,-4(a0)
13564 90000670: 01402821 move a1,t2
13565 -90000674: 0411ffba bal 90000560 <mips_init_icache>
13566 -90000678: 01803021 move a2,t4
13567 -9000067c: 01602821 move a1,t3
13568 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
13569 -90000684: 01a03021 move a2,t5
13570 -90000688: 03000008 jr t8
13571 -9000068c: 00000000 nop
13572 +90000674: 01803021 move a2,t4
13573 +90000678: 8f8f83ec lw t7,-31764(gp)
13574 +9000067c: 01e0f809 jalr t7
13575 +90000680: 00000000 nop
13576 +90000684: 01602821 move a1,t3
13577 +90000688: 01a03021 move a2,t5
13578 +9000068c: 8f8f81e0 lw t7,-32288(gp)
13579 +90000690: 01e0f809 jalr t7
13580 +90000694: 00000000 nop
13581 +90000698: 03000008 jr t8
13582 +9000069c: 00000000 nop
13584 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13586 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
13587 Author: Vlad Lungu <vlad.lungu@windriver.com>
13588 Date: Mon May 5 14:04:00 2008 +0300
13590 Allow building mips versions with ELDK 3.1.1
13592 .gpword works only with local symbols on certain binutils versions
13594 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
13596 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
13597 Author: Wolfgang Denk <wd@denx.de>
13598 Date: Mon May 5 12:52:36 2008 +0200
13600 MAKEALL: add inka4x0 board
13602 Signed-off-by: Wolfgang Denk <wd@denx.de>
13604 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
13605 Author: Wolfgang Denk <wd@denx.de>
13606 Date: Sun May 4 21:34:23 2008 +0200
13608 kb9202 board: fix build problem.
13610 Signed-off-by: Wolfgang Denk <wd@denx.de>
13612 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
13613 Author: Wolfgang Denk <wd@denx.de>
13614 Date: Sun May 4 12:10:33 2008 +0200
13616 Prepare for v1.3.3-rc3
13618 Update ChNAGELOG, minor white space cleanup.
13620 Signed-off-by: Wolfgang Denk <wd@denx.de>
13622 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
13623 Author: Wolfgang Denk <wd@denx.de>
13624 Date: Sun May 4 00:35:15 2008 +0200
13626 drivers/net/tsec.c: Fix typo.
13628 Signed-off-by: Wolfgang Denk <wd@denx.de>
13630 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
13631 Author: Mike Frysinger <vapier@gentoo.org>
13632 Date: Fri May 2 21:45:12 2008 -0400
13634 version_autogenerated.h: use printf rather than echo -n
13636 Some systems are dumb and do not implement the -n flag to echo (like OS X).
13637 Convert the Makefile to use printf as this should work everywhere.
13639 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13640 Signed-off-by: Wolfgang Denk <wd@denx.de>
13642 commit 4acc2a108ad0a669165924704a6cb083f9138242
13643 Author: Mike Frysinger <vapier@gentoo.org>
13644 Date: Fri May 2 18:17:50 2008 -0400
13646 fix building when saveenv is disabled in some setups
13648 If you enable environment in the flash, but disable the embedded
13649 option, and you disable the saveenv command, then the #if nested
13650 logic will trigger a compile failure:
13651 env_flash.c: In function 'env_relocate_spec':
13652 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
13653 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
13655 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13657 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
13658 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
13659 Date: Fri May 2 16:10:04 2008 -0400
13661 SBC8548: fix address mask to allow 64M flash
13663 Fix incorrect mask to enable all 64MB of onboard flash.
13664 Previously U-Boot incorrectly mapped only 8MB of flash, this
13665 patch correctly maps all the available flash.
13667 Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
13669 commit 3648085c464c8c22ef76fab006ca4344d3796124
13670 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13671 Date: Fri May 2 19:48:56 2008 +0200
13673 qemu_mips: add README
13675 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13677 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
13678 Author: Marcel Ziswiler <marcel@ziswiler.com>
13679 Date: Fri May 2 02:35:59 2008 +0200
13681 Fix misspelled comment
13683 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13685 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
13686 Author: Mike Frysinger <vapier@gentoo.org>
13687 Date: Thu May 1 04:13:05 2008 -0400
13689 mkimage: make mmap() checks consistent
13691 The mmap() related code is full of inconsistent casts/constants when
13692 it comes to error checking, and may break when building on some
13693 systems (like ones that do not implicitly define the caddr_t type).
13694 Let's just avoid the whole mess by writing the code nice and clean in
13697 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13699 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
13700 Author: Marcel Ziswiler <marcel@ziswiler.com>
13701 Date: Thu May 1 09:05:34 2008 +0200
13703 Fix defined but not used build warning
13705 - warning: 'srom' defined but not used
13707 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13709 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
13710 Author: Marcel Ziswiler <marcel@ziswiler.com>
13711 Date: Thu May 1 09:05:26 2008 +0200
13713 Fix implicit declaration build warnings
13715 - warning: implicit declaration of function ‘serial_initialize’
13717 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13719 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
13720 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
13721 Date: Tue Apr 29 19:18:32 2008 +0200
13723 TSEC: add config options for VSC8601 RGMII PHY
13725 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
13726 and Tx clock lines. They are configured using 2 bits in extended
13728 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
13729 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
13731 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
13732 Acked-by: Andy Fleming <afleming@freescale.com>
13733 Acked-by: Ben Warren <biggerbadderben@gmail.com>
13736 drivers/net/tsec.c | 6 ++++++
13737 drivers/net/tsec.h | 3 +++
13738 2 files changed, 9 insertions(+), 0 deletions(-)
13740 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
13741 Author: Wolfgang Denk <wd@denx.de>
13742 Date: Sat May 3 23:07:15 2008 +0200
13744 Revert "ColdFire: Get information from the correct GCC"
13746 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
13747 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
13749 commit c4e5f52a58d278eebb87f476e353972c5dacea40
13750 Author: Wolfgang Denk <wd@denx.de>
13751 Date: Sat May 3 22:25:00 2008 +0200
13753 config.mk: use correct (cross) compiler
13755 Some config.mk files reference $(CC) to test for specific tool chain
13756 features, so make sure $(CC) gets set before including any such
13759 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
13762 Signed-off-by: Wolfgang Denk <wd@denx.de>
13764 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
13765 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13766 Date: Thu May 1 02:13:44 2008 +0200
13768 pxa: fix previous definition on cpu init
13770 start.S:183:1: warning: "ICMR" redefined
13771 In file included from start.S:33:
13772 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
13773 start.S:187:1: warning: "RCSR" redefined
13776 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13778 commit 6d12e697de794d700767f22f950e3026ccf4daf6
13779 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13780 Date: Thu May 1 02:13:43 2008 +0200
13782 pxa: fix pcmcia operation on 'i' may be undefined
13784 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13785 Signed-off-by: Wolfgang Denk <wd@denx.de>
13787 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
13788 Author: Kumar Gala <galak@kernel.crashing.org>
13789 Date: Wed Apr 30 16:24:35 2008 -0500
13791 MPC8610HPCD: Drop -O2 from the build flags
13793 Make the flags use -Os like all other boards
13795 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13797 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
13798 Author: Stefan Roese <sr@denx.de>
13799 Date: Wed Apr 30 15:50:39 2008 +0200
13801 RTC: Fix month offset by one problem in M41T62 RTC driver
13803 This patch fixes a problem with the month being read and written
13804 incorrectly (offset by one). This only gets visible by also using
13805 the Linux driver (rtc-m41t80).
13807 Tested on AMCC Canyonlands.
13809 Signed-off-by: Stefan Roese <sr@denx.de>
13811 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
13812 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13813 Date: Sat May 3 13:51:44 2008 +0900
13815 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
13817 Current trick to pick up GNU assembler minor version uses a dot(.) as a
13818 delimiter, and take the second field to obtain minor version number. But
13819 as can be expected, this doesn't work with a version string which has
13820 dots more than needs.
13824 $ mips-linux-gnu-as --version | grep 'GNU assembler'
13825 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
13826 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
13830 This patch restricts the version format to 2.XX.XX... This will work
13833 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
13835 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
13839 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13841 commit ea638951acead7f1086c908c0b9f086beab82a22
13842 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13843 Date: Sat May 3 13:51:28 2008 +0900
13845 [MIPS] cpu/mips/cache.S: Add dcache_enable
13847 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
13848 "allow ports to override bootelf behavior") requires ports to have this
13851 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13852 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13854 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
13855 Author: Wolfgang Denk <wd@denx.de>
13856 Date: Thu May 1 21:30:16 2008 +0200
13858 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
13860 Onenand needs a version of memcpy() which performs 16 bit accesses
13861 only; make sure the name does not conflict with the standard
13864 Signed-off-by: Wolfgang Denk <wd@denx.de>
13866 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
13867 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13868 Date: Wed Apr 30 22:38:17 2008 +0200
13870 cmd_nand: fix warning: str2long ncompatible pointer type
13872 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13874 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
13875 Author: Timur Tabi <timur@freescale.com>
13876 Date: Fri Apr 4 11:16:11 2008 -0500
13878 Fix calculation of I2C clock for some 86xx chips
13880 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
13881 There is no pattern that can be used to determine which chips use which
13882 frequency, so the only way to determine is to look up the actual SOC
13883 designation and use the right value for that SOC.
13885 Signed-off-by: Timur Tabi <timur@freescale.com>
13887 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
13888 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13889 Date: Wed Apr 30 12:11:19 2008 -0500
13891 ColdFire: Fix ethernet hang issue for mcf547x_8x
13893 The ethernet hang is caused by receiving buffer in DRAM is not
13894 yet ready due to access cycles require longer time in DRAM.
13895 Relocate DMA buffer descriptors from DRAM to internal SRAM.
13897 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13899 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
13900 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13901 Date: Wed Apr 30 12:10:47 2008 -0500
13903 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
13905 Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
13906 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13908 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
13909 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13910 Date: Wed Apr 30 12:10:23 2008 -0500
13912 ColdFire: Get information from the correct GCC
13914 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
13915 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13917 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
13918 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
13919 Date: Wed Apr 30 18:02:59 2008 +0200
13921 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
13925 nv_nand.c: In function 'saveenv':
13926 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
13927 env_nand.c: In function 'env_relocate_spec':
13928 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
13930 if compiled for davinci_schmoogie_config.
13932 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
13933 Ack by: Sergey Kubushyn <ksi@koi8.net>
13935 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
13936 Author: Anatolij Gustschin <agust@denx.de>
13937 Date: Wed Apr 30 13:34:40 2008 +0200
13939 Fix warnings while compiling net/net.c for MPC8610HPCD board
13941 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
13942 causing overriding default -Os option. New gcc (ver. 4.2.2)
13943 produces warnings while compiling net/net.c file with -O2
13944 option. The patch is an attempt to fix this.
13946 Signed-off-by: Anatolij Gustschin <agust@denx.de>
13948 commit 58b575e575c25fdf8c88141e145db201f3092149
13949 Author: Sascha Laue <Sascha.Laue@gmx.biz>
13950 Date: Wed Apr 30 15:23:38 2008 +0200
13952 lwmon5: fix offset error in sysmon0 POST
13954 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
13955 Signed-off-by: Wolfgang Denk <wd@denx.de>
13957 commit e7419b243a373de4ee042f7d4f45f66de787240d
13958 Author: Sascha Laue <Sascha.Laue@gmx.biz>
13959 Date: Wed Apr 30 15:16:35 2008 +0200
13961 lwmon5: fix manual merge error in POST
13963 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
13965 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
13966 Author: Wolfgang Denk <wd@denx.de>
13967 Date: Wed Apr 30 17:46:26 2008 +0200
13969 cmd_nand.c: fix another 'incompatible pointer type' warning.
13971 Signed-off-by: Wolfgang Denk <wd@denx.de>
13973 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
13974 Author: Wolfgang Denk <wd@denx.de>
13975 Date: Wed Apr 30 17:25:07 2008 +0200
13977 Makefile: fix parallel builds
13979 This problem shows up with parallel builds only; it results in
13980 somewhat cryptic error messages like
13982 $ JOBS=-j6 MAKEALL netstar
13983 Configuring for netstar board...
13984 arm-linux-ld: cannot find -lgeneric
13985 make[1]: *** [eeprom.srec] Error 1
13987 A few boards (like netstar and voiceblue) need some libraries for
13988 building; however, the board Makefile does not contain any such
13989 dependencies which may cause problems with parallel builds. Adding
13990 such dependencies is difficult as we would also have to provide build
13991 rules, which already exist in the respective library Makefiles.
13993 To solve this, we make sure that all libraries get built before the
13996 Signed-off-by: Wolfgang Denk <wd@denx.de>
13998 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
13999 Author: Stefan Roese <sr@denx.de>
14000 Date: Wed Apr 30 14:51:36 2008 +0200
14002 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
14004 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
14005 used for NAND booting to match the values needed for the new 512MB
14006 DIMM modules shipped with the productions boards:
14008 Crucial: CT6464AC667.8FB
14010 Signed-off-by: Stefan Roese <sr@denx.de>
14012 commit ea9202a659dc75996facf1475f1866a19a9d3129
14013 Author: Stefan Roese <sr@denx.de>
14014 Date: Wed Apr 30 10:49:43 2008 +0200
14016 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
14018 This patch fixes a problem with DIMMs that have 8 banks. Now the
14019 MCIF0_MBxCF register will be setup correctly for this setup too.
14021 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
14023 Signed-off-by: Stefan Roese <sr@denx.de>
14025 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
14026 Author: Wolfgang Denk <wd@denx.de>
14027 Date: Tue Apr 29 23:41:06 2008 +0200
14029 Prepare v1.3.3-rc2, again.
14031 Signed-off-by: Wolfgang Denk <wd@denx.de>
14033 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
14034 Author: Wolfgang Denk <wd@denx.de>
14035 Date: Tue Apr 29 23:35:24 2008 +0200
14039 Signed-off-by: Wolfgang Denk <wd@denx.de>
14041 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
14042 Author: Wolfgang Denk <wd@denx.de>
14043 Date: Tue Apr 29 23:32:20 2008 +0200
14045 common/env_nand.c: fix one more incompatible pointer type issue
14047 Signed-off-by: Wolfgang Denk <wd@denx.de>
14049 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
14050 Author: Wolfgang Denk <wd@denx.de>
14051 Date: Tue Apr 29 21:33:08 2008 +0200
14053 post/board/lwmon5/sysmon.c: fix manual merge error.
14055 Signed-off-by: Wolfgang Denk <wd@denx.de>
14057 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
14058 Author: Kumar Gala <galak@kernel.crashing.org>
14059 Date: Tue Apr 29 12:54:59 2008 -0500
14061 85xx: Add -mno-spe to e500/85xx builds
14063 Newer gcc's might be configured to enable autovectorization by default.
14064 If we happen to build with one of those compilers we will get SPE
14065 instructions in random code.
14067 -mno-spe disables the compiler for automatically generating SPE
14068 instructions without our knowledge.
14070 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14072 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
14073 Author: Kumar Gala <galak@kernel.crashing.org>
14074 Date: Tue Apr 29 10:18:34 2008 -0500
14076 Update .gitignore for zlib.h
14078 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14080 commit 45239cf4152109caa925145ccd433529902df887
14081 Author: Kumar Gala <galak@kernel.crashing.org>
14082 Date: Tue Apr 29 10:27:08 2008 -0500
14084 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
14086 All the 85xx and 86xx UM describe the register as timing_cfg_3
14089 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14091 commit ef7d30b14394e4c4a153118f5845760cadada02a
14092 Author: Kumar Gala <galak@kernel.crashing.org>
14093 Date: Tue Apr 29 10:28:34 2008 -0500
14095 85xx/86xx: Rename DDR init address and init extended address register
14097 Rename init_addr and init_ext_addr to match the docs between
14098 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
14100 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14102 commit cf6cc014270549684873a5972d2595052c468cb6
14103 Author: Kumar Gala <galak@kernel.crashing.org>
14104 Date: Mon Apr 28 02:24:04 2008 -0500
14106 85xx: Additional fixes and cleanup of MP code
14108 * adjust __spin_table alignment to match ePAPR v0.94 spec
14109 * loop over all cpus when determing who is up. This fixes an issue if
14110 the "boot cpu" isn't core0. The "boot cpu" will already be in the
14111 cpu_up_mask so there is no harm
14112 * Added some protection in the code to ensure proper behavior. These
14113 changes are explicitly needed but don't hurt:
14114 - Added eieio to ensure the "hot word" of the table is written after
14115 all other table updates have occurred.
14116 - Added isync to ensure we don't prefetch loading of table entries
14117 until we a released
14119 These issues we raised by Dave Liu.
14121 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14123 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
14124 Author: Yuri Tikhonov <yur@emcraft.com>
14125 Date: Tue Apr 29 15:06:41 2008 +0200
14127 lwmon5: minor clean-up to include/configs/lwmon5.h
14129 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
14130 the CFG_DSPIC_TEST_ADDR definition more readable.
14132 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14134 commit f4c4d21a885ccc222fd0acdf653b683249e85117
14135 Author: Stefan Roese <sr@denx.de>
14136 Date: Tue Apr 29 16:08:05 2008 +0200
14138 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
14140 Signed-off-by: Stefan Roese <sr@denx.de>
14142 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
14143 Author: Yuri Tikhonov <yur@emcraft.com>
14144 Date: Tue Apr 29 13:32:45 2008 +0200
14146 ppc flush_cache: add watch-dog triggering into the loops.
14148 Some boards (e.g. lwmon5) need rather a frequent watch-dog
14149 kicking. Since the time it takes for the flush_cache() function
14150 to complete its job depends on the size of data being flushed, one
14151 may encounter watch-dog resets on such boards when, for example,
14152 download big files over ethernet.
14154 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14156 commit cab99d6f3281ab6784feccf98b9b425daa58418a
14157 Author: Stefan Roese <sr@denx.de>
14158 Date: Tue Apr 29 14:44:54 2008 +0200
14160 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
14162 Signed-off-by: Stefan Roese <sr@denx.de>
14164 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
14165 Author: Stefan Roese <sr@denx.de>
14166 Date: Tue Apr 29 14:12:07 2008 +0200
14168 ppc4xx: Fix Katmai CFG_MONITOR_LEN
14170 Signed-off-by: Stefan Roese <sr@denx.de>
14172 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
14173 Author: Stefan Roese <sr@denx.de>
14174 Date: Tue Apr 29 13:57:07 2008 +0200
14176 ppc4xx: Complete remove bogus dflush()
14178 Since the current dflush() implementation is know to have some problems
14179 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
14180 it by using clean_dcache_range().
14182 Tested on Katmai with ECC DIMM.
14184 Signed-off-by: Stefan Roese <sr@denx.de>
14186 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
14187 Author: Stefan Roese <sr@denx.de>
14188 Date: Tue Apr 29 13:36:51 2008 +0200
14190 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
14192 As it seems the "old" ECC initialization routine by using dflush() didn't
14193 write all lines in the dcache back to memory on lwmon5. This could lead
14194 to ECC error upon Linux booting. This patch changes the program_ecc()
14195 routine to now use clean_dcache_range() instead of dflush().
14196 clean_dcache_range() uses dcbst which is exactly what we want in this
14199 Since dflush() is known is cause problems, this routine will be
14200 removed completely and replaced by clean_dcache_range() with an
14203 Signed-off-by: Stefan Roese <sr@denx.de>
14205 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
14206 Author: Yuri Tikhonov <yur@emcraft.com>
14207 Date: Mon Apr 28 18:19:34 2008 +0200
14209 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
14211 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14213 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
14214 Author: Markus Brunner <super.firetwister@googlemail.com>
14215 Date: Mon Apr 28 08:47:47 2008 +0200
14217 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
14219 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
14220 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
14223 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
14225 commit 2ef7503a593c77a80c2a054011970227c4b62774
14226 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14227 Date: Thu Apr 24 07:57:17 2008 +0200
14229 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
14231 Move non-inlied functions into specific drivers file
14232 Set get_prom as weak
14234 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14235 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14236 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14238 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
14239 Author: Guennadi Liakhovetski <lg@denx.de>
14240 Date: Thu Apr 3 17:04:19 2008 +0200
14242 net: make ARP timeout configurable
14244 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
14245 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
14246 to the boards get lost, which typically are ARP replies. By configuring
14247 the timeout to a lower value we significantly improve the first network
14248 transfer time on this board. The timeout is specified in milliseconds,
14249 later internally it is converted to deciseconds, because it has to be
14250 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
14253 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14254 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14256 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
14257 Author: Guennadi Liakhovetski <lg@denx.de>
14258 Date: Thu Apr 3 13:36:18 2008 +0200
14260 minor cs8900 driver clean up
14262 Remove a redundant register definition, clean up some coding style
14265 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14266 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14268 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
14269 Author: Wolfgang Denk <wd@denx.de>
14270 Date: Mon Apr 28 22:01:04 2008 +0200
14272 jffs2_1pass.c: fix incompatible pointer type warning
14274 Signed-off-by: Wolfgang Denk <wd@denx.de>
14276 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
14277 Author: Sascha Laue <Sascha.Laue@gmx.biz>
14278 Date: Tue Apr 1 10:10:18 2008 +0200
14280 lwmon5: update dsPIC POST spezification
14282 The specification for the lwmon5 board dsPIC POST got changed.
14283 Also add defines for the temperatures and voltages.
14285 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
14287 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
14288 Author: Sascha Laue <Sascha.Laue@gmx.biz>
14289 Date: Tue Apr 1 15:13:03 2008 +0200
14291 Fix watchdog POST for lwmon5
14293 If the hardware watchdog detects a voltage error, the watchdog sets
14294 GPIO62 to low. The watchdog POST has to detect this low level.
14296 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
14297 Signed-off-by: Wolfgang Denk <wd@denx.de>
14299 commit dd5748bcd669f46aeb6686c1b341323843738ccc
14300 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14301 Date: Mon Apr 28 14:37:14 2008 +0200
14303 rtl8169: fix compiler warnings
14305 Fix multiple compiler warnings related to argument type mismatch.
14307 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14309 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
14310 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14311 Date: Mon Apr 28 14:36:06 2008 +0200
14313 IDE: fix compiler warnings
14315 The IDE driver can use 32-bit addresses in LBA mode, in which case it
14316 spits multiple warnings during compilation. Fix them.
14318 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14320 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
14321 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14322 Date: Mon Apr 28 14:35:57 2008 +0200
14324 LinkStation: fix compiler warning, add a maintainer
14326 out_8 wants a pointer to an unsigned as the first argument. Add a
14327 maintainer for Linkstation boards.
14329 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14331 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
14332 Author: Wolfgang Denk <wd@denx.de>
14333 Date: Mon Apr 28 14:55:12 2008 +0200
14335 cmd_nand.c: fix "differ in signedness" problem
14337 Signed-off-by: Wolfgang Denk <wd@denx.de>
14339 commit f2c288a35341ad02ac03b1563d786763c9c8f159
14340 Author: Wolfgang Denk <wd@denx.de>
14341 Date: Mon Apr 28 12:48:47 2008 +0200
14343 pcnet.c: fix a merge issue
14345 Signed-off-by: Wolfgang Denk <wd@denx.de>
14347 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
14348 Author: Wolfgang Denk <wd@denx.de>
14349 Date: Mon Apr 28 12:08:18 2008 +0200
14351 NAND: fix some strict-aliasing compiler warnings
14353 Signed-off-by: Wolfgang Denk <wd@denx.de>
14355 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
14356 Author: Stefan Roese <sr@denx.de>
14357 Date: Mon Apr 28 11:37:14 2008 +0200
14359 ppc4xx: Fix compile warning of hcu4 board
14361 Signed-off-by: Stefan Roese <sr@denx.de>
14363 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
14364 Author: Wolfgang Denk <wd@denx.de>
14365 Date: Mon Apr 28 11:31:23 2008 +0200
14367 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
14369 Signed-off-by: Wolfgang Denk <wd@denx.de>
14371 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
14372 Author: Guennadi Liakhovetski <lg@denx.de>
14373 Date: Mon Apr 28 00:25:32 2008 +0200
14375 mx31ads: fix loadaddr environment variable define
14377 Arithmetic expressions do not get evaluated under stringification. Remove
14378 default network configuration, add DHCP command support. Thanks to Felix
14379 Radensky for reporting.
14381 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14383 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
14384 Author: Wolfgang Denk <wd@denx.de>
14385 Date: Mon Apr 28 10:55:24 2008 +0200
14387 katmai: fix section overlap problem
14389 Since we didn't want to remove features from the configuration, we
14390 decided to increase the U-Boot image size (add one flash sector).
14392 Also changed the default environment definition to make it
14393 independent of such changes.
14395 Signed-off-by: Wolfgang Denk <wd@denx.de>
14396 Acked-by: Stefan Roese <sr@denx.de>
14398 commit 941d696d25624e3cc65ebf924199541acf52d74e
14399 Author: Wolfgang Denk <wd@denx.de>
14400 Date: Mon Apr 28 10:55:24 2008 +0200
14402 katmai: fix section overlap problem
14404 Since we didn't want to remove features from the configuration, we
14405 decided to increase the U-Boot image size (add one flash sector).
14407 Also changed the default environment definition to make it
14408 independent of such changes.
14410 Signed-off-by: Wolfgang Denk <wd@denx.de>
14411 Acked-by: Stefan Roese <sr@denx.de>
14413 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
14414 Author: Kumar Gala <galak@kernel.crashing.org>
14415 Date: Sat Apr 26 11:44:44 2008 -0500
14417 post: Fix building with O=
14419 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14421 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
14422 Author: Wolfgang Denk <wd@denx.de>
14423 Date: Sat Apr 26 01:55:00 2008 +0200
14427 Signed-off-by: Wolfgang Denk <wd@denx.de>
14429 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
14430 Author: Wolfgang Denk <wd@denx.de>
14431 Date: Sat Apr 26 01:25:39 2008 +0200
14433 post/Makefile: make sure to use the correct flags
14435 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
14436 messages to be printed.
14438 Signed-off-by: Wolfgang Denk <wd@denx.de>
14440 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
14441 Author: Wolfgang Denk <wd@denx.de>
14442 Date: Sat Apr 26 00:34:42 2008 +0200
14444 Coding Style cleanup, update CHANGELOG
14446 Signed-off-by: Wolfgang Denk <wd@denx.de>
14448 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
14449 Author: Magnus Lilja <lilja.magnus@gmail.com>
14450 Date: Sun Apr 20 10:38:12 2008 +0200
14452 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
14454 This patch enables SPI and MC13783/RTC support for the Litekit board.
14456 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14458 commit f97abbfb47d9e407354e157cae3f6369e460cd37
14459 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
14460 Date: Fri Apr 25 01:08:32 2008 -0500
14462 MPC8544DS: decode pcie3 end-point configuration correctly.
14464 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14465 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14467 commit 292188e15523c165c4269403fdcd33c26d89176e
14468 Author: Roy Zang <tie-fei.zang@freescale.com>
14469 Date: Fri Apr 25 00:55:09 2008 -0500
14471 MPC8544DS: Removes the unknown flash message information
14473 This patch removes the unknown flash message information:
14474 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
14475 This unknown flash message is caused by PromJet.
14476 Some of the board user is unhappy with this information.
14478 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
14479 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14481 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
14482 Author: Kim Phillips <kim.phillips@freescale.com>
14483 Date: Thu Apr 24 14:07:38 2008 -0500
14485 mpc83xx: bump loadaddr over fdtaddr to 0x500000
14487 this seems as a good compromise between human memory, typing,
14488 and last but not least, to accommodate for current and future kernel bloat.
14490 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14491 Acked-by: Dave Liu <daveliu@freescale.com>
14493 commit be5a7190265a34d968578ff266549c60f6f57654
14494 Author: Dave Liu <r63238@freescale.com>
14495 Date: Tue Apr 15 13:12:23 2008 +0800
14497 mpc83xx: clean up the readme for 83xx boards
14499 1. correct the typo
14500 2. correct the memory map for 837xerdb board
14502 Signed-off-by: Dave Liu <daveliu@freescale.com>
14504 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
14505 Author: Dave Liu <r63238@freescale.com>
14506 Date: Tue Apr 15 13:11:11 2008 +0800
14508 mpc83xx: remove the unused CPM's stuff
14510 The MPC83xx family never have CPM block, so remove it from 83xx.
14512 Signed-off-by: Dave Liu <daveliu@freescale.com>
14514 commit c63ad6325a8ac0097a54b418a3288926b0484b18
14515 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14516 Date: Fri Apr 18 16:29:40 2008 +0200
14518 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
14520 This patch adds a configurable flash auto protection list that can be used
14521 to make U-Boot protect flash regions in flash_init().
14523 The idea has been discussed on the u-boot mailing list starting
14526 Even this patch brings a new feature it is used as a bugfix for 4xx
14527 platforms where flash_init() does not completely protect the
14528 monitor's flash range in all situations.
14530 U-Boot protects the flash range from CFG_MONITOR_BASE to
14531 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
14532 include the reset vector at 0xfffffffc.
14535 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
14537 This config option will auto protect the last 512k of flash that
14538 contains the bootloader on board like APC405 and PMC405.
14540 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14542 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
14543 Author: Stefan Roese <sr@denx.de>
14544 Date: Fri Apr 25 13:59:03 2008 +0200
14546 ppc4xx: Remove double defines in lwmon5.h
14548 introduced with latest lwmon5/POST merge
14550 Signed-off-by: Stefan Roese <sr@denx.de>
14552 commit 7590378fb9c686709492ceb142825cd058255956
14553 Author: Bartlomiej Sieka <tur@semihalf.com>
14554 Date: Fri Apr 25 13:54:02 2008 +0200
14556 Use watchdog-aware functions when calculating hashes of images - take two
14558 Some files didn't get updated properly with the "Use watchdog-aware
14559 functions when calculating hashes of images" commit, this commit
14562 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14563 Signed-off-by: Wolfgang Denk <wd@denx.de>
14565 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
14566 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14567 Date: Fri Apr 25 12:01:39 2008 +0200
14569 ppc4xx: Add bootcount limit handling for APC405 boards
14571 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14573 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
14574 Author: Bartlomiej Sieka <tur@semihalf.com>
14575 Date: Fri Apr 25 12:10:09 2008 +0200
14577 Use watchdog-aware functions when calculating hashes of images
14579 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14581 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
14582 Author: Wolfgang Denk <wd@denx.de>
14583 Date: Fri Apr 25 12:44:08 2008 +0200
14585 USB: fix more GCC 4.2.x aliasing warnings
14587 Signed-off-by: Wolfgang Denk <wd@denx.de>
14588 Acked-by: Markus Klotzbuecher <mk@denx.de>
14590 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
14591 Author: Wolfgang Denk <wd@denx.de>
14592 Date: Fri Apr 25 12:41:53 2008 +0200
14594 lib_generic/crc32.c: add missing #include <watchdog.h>
14596 Signed-off-by: Wolfgang Denk <wd@denx.de>
14598 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
14599 Author: Wolfgang Denk <wd@denx.de>
14600 Date: Fri Apr 25 11:52:21 2008 +0200
14602 lib_generic/crc32.c: fix compile problem
14604 Signed-off-by: Wolfgang Denk <wd@denx.de>
14606 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
14607 Author: Stefan Roese <sr@denx.de>
14608 Date: Tue Apr 22 12:20:32 2008 +0200
14610 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
14612 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
14613 environment variable will now get passed to the Linux kernel by setting
14614 the device_type property of the PCIe device tree node. For normal root-
14615 complex configuration it will keep its defaults value of "pci" and for
14616 endpoint configuration it will get changed to "pci-endpoint".
14618 Signed-off-by: Stefan Roese <sr@denx.de>
14620 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
14621 Author: Yuri Tikhonov <yur@emcraft.com>
14622 Date: Thu Apr 24 10:30:53 2008 +0200
14624 lwmon5: watchdog POST fix
14626 Use the GPT0_MASKx registers as the temporary storage for watch-dog
14627 timer POST test instead of GPT0_COMPx. The latter
14628 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
14630 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
14631 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14633 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
14634 Author: Kim Phillips <kim.phillips@freescale.com>
14635 Date: Mon Apr 21 18:10:14 2008 -0500
14637 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
14639 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
14640 proven problematic getting right from the start at least on 83xx and
14643 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14645 commit a99715b8ebfc500f3f40e01b36b64d473938443d
14646 Author: Detlev Zundel <dzu@denx.de>
14647 Date: Fri Apr 18 14:50:01 2008 +0200
14649 Realining some header definitions.
14651 Signed-off-by: Detlev Zundel <dzu@denx.de>
14653 commit 4acbc6c7f993cae409c424615415a3e76820f13d
14654 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14655 Date: Thu Apr 24 07:57:16 2008 +0200
14657 NE2000: coding style cleanup
14659 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14661 commit b4aff1ffaf7120032c653357c007faa14f74d29d
14662 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14663 Date: Wed Apr 23 00:11:47 2008 +0900
14665 qemu-mips.h: Add CFI support
14667 CONFIG_ENV_OVERWRITE is also added.
14669 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
14671 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14672 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14674 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
14675 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14676 Date: Tue Apr 22 22:47:27 2008 +0900
14678 doc/README.mips: Add MIPS notes
14680 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14682 commit 215b01bba8bc662d35f72b084700b192d367dfb4
14683 Author: Bartlomiej Sieka <tur@semihalf.com>
14684 Date: Tue Apr 22 12:27:56 2008 +0200
14686 Add support for calculating hashes with watchdog triggering
14688 Implement watchodg-aware variants of hash calculation functions:
14692 The above functions calculate the hash of the input buffer in chunks,
14693 triggering the watchdog after processing each chunk. The chunk size
14694 is given as a function call parameter.
14696 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14698 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
14699 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14700 Date: Wed Apr 23 11:02:12 2008 +0900
14702 qemu-mips: Cleanup whitespace, indentation, etc.
14704 No functional change.
14706 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
14707 Then I re-created from scratch, and changed more lines than the original.
14709 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14710 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14712 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
14713 Author: Vlad Lungu <vlad@comsys.ro>
14714 Date: Wed Oct 10 23:02:09 2007 +0300
14716 Fixed pcnet io_base
14718 Bus and phys address are not always the same
14720 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14722 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
14723 Author: Wolfgang Denk <wd@denx.de>
14724 Date: Thu Apr 24 23:44:26 2008 +0200
14726 drivers/net/pcnet.c: Coding Style cleanup.
14728 Signed-off-by: Wolfgang Denk <wd@denx.de>
14730 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
14731 Author: Vlad Lungu <vlad@comsys.ro>
14732 Date: Wed Oct 10 23:04:23 2007 +0300
14734 Added Am79C970A chip id to pcnet
14736 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14738 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
14739 Author: Magnus Lilja <lilja.magnus@gmail.com>
14740 Date: Sun Apr 20 10:35:03 2008 +0200
14742 i.MX31: Fix architecture numbers for ADS and Litekit boards
14744 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
14746 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14748 commit e7ae84d6c7288790e88639f57cb60daf89c11369
14749 Author: Magnus Lilja <lilja.magnus@gmail.com>
14750 Date: Sun Apr 20 10:36:36 2008 +0200
14752 i.MX31: Use symbolic names for Litekit membases.
14754 Use symbolic names instead of hard coded addresses for Litekit membases.
14756 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14758 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
14759 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14760 Date: Sat Apr 19 17:59:20 2008 +0200
14762 Fix show_boot_progress prototype
14764 in commit fad634071 "make show_boot_progress () weak."
14765 show_boot_progress is supposed to be declared as weak but declared as
14768 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14770 commit edbed247a14d70b94958010f736621212285de91
14771 Author: Bartlomiej Sieka <tur@semihalf.com>
14772 Date: Fri Apr 18 12:39:23 2008 +0200
14774 Memory footprint optimizations
14776 As suggested by Wolfgang Denk:
14777 - image printing functions:
14779 - remove indentation prefix from functions' signatures
14780 - merge getenv_verify and getenv_autostart into one parametrized function
14782 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14784 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
14785 Author: Guennadi Liakhovetski <lg@denx.de>
14786 Date: Tue Apr 15 13:33:11 2008 +0200
14788 MX31ADS environment variable update, spi and rtc support
14790 Update MX31ADS default environment to better match the flash layout and
14791 the memory map, support SPI and RTC.
14793 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14795 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
14796 Author: Kumar Gala <galak@kernel.crashing.org>
14797 Date: Mon Apr 21 09:28:36 2008 -0500
14799 85xx: Round up frequency calculations to get reasonable output
14801 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
14803 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
14805 Signed-off-by: Dejan Minic <minic@freescale.com>
14806 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
14807 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14808 Acked-by: Andy Fleming <afleming@freescale.com>
14810 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
14811 Author: Kumar Gala <galak@kernel.crashing.org>
14812 Date: Wed Apr 23 16:58:04 2008 -0500
14814 fsl_pci: Only modify registers if we have them
14816 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
14818 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14820 commit 83fe32334337def160b302aa9d152d808bfcc68e
14821 Author: Markus Klotzbücher <mk@denx.de>
14822 Date: Wed Apr 23 10:57:33 2008 +0200
14824 USB: remove a cpu bug workaround for an unsupported architecture.
14826 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
14828 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
14829 Author: Markus Klotzbücher <mk@denx.de>
14830 Date: Wed Apr 23 10:53:23 2008 +0200
14832 USB: fix those pesky aliasing warnings issued by gcc-4.2
14834 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
14835 Signed-off-by: Detlev Zundel <dzu@denx.de>
14837 commit 89cdab788f3716b335fefb60b836ebcf975aceab
14838 Author: Mike Frysinger <vapier@gentoo.org>
14839 Date: Mon Mar 31 11:02:01 2008 -0400
14841 crc32: use uint32_t rather than unsigned long
14843 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
14844 this is done with the build toolchain instead of the target tool
14845 chain, so if the build is a 64bit system but the target is 32bits,
14846 the size will obviously be wrong. This converts all unsigned long
14847 stuff related to crc32 to uint32_t types. Compile tested only: output
14848 of ./tools/envcrc when run on a 32bit build system matches that of a
14849 64bit build system.
14851 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14852 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14854 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
14855 Author: Dirk Behme <dirk.behme@googlemail.com>
14856 Date: Wed Mar 26 09:53:29 2008 +0100
14858 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
14860 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
14864 - Remove *_masked() functions as noted by Wolfgang
14866 - Adapt register naming to recent TI spec (sprue26, March 2007)
14868 - Fix reset_timer() handling
14870 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
14872 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
14874 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
14876 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
14878 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
14880 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
14881 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
14883 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
14884 Author: Sergei Poselenov <sposelenov@emcraft.com>
14885 Date: Wed Apr 9 16:09:41 2008 +0200
14887 Added watchdog triggering calls in the "mtest" test function.
14889 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
14891 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
14892 Author: Yuri Tikhonov <yur@emcraft.com>
14893 Date: Sun Apr 6 19:19:14 2008 +0200
14895 lwmon5 watchdog: limit trigger rate
14897 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
14898 the CONFIG_WD_MAX_RATE value.
14900 Note that an earlier version of this patch which used microseconds
14901 instead of ticks dis not work. The problem was that we used
14902 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
14903 get_tbclk(), which in turn calls get_sys_info(). It turns out that
14904 this function does a lot of prolonged operations (like divisions)
14905 which take too much time so we do not trigger the watchdog in time,
14906 and it resets the system.
14908 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14910 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
14911 Author: Yuri Tikhonov <yur@emcraft.com>
14912 Date: Mon Mar 31 10:51:37 2008 +0200
14914 POST: move CONFIG_POST to Makefiles
14916 Introduce the new logical option CONFIG_HAS_POST which is set when the
14917 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
14918 to determine should the POST libs be compiled for the selected target
14921 To avoid breaking u-boot linking process, the empty post/libpost.a file is
14922 created for platforms which do not have POSTs.
14924 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14925 Signed-off-by: Wolfgang Denk <wd@denx.de>
14927 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
14928 Author: Yuri Tikhonov <yur@emcraft.com>
14929 Date: Mon Mar 31 10:49:34 2008 +0200
14931 POST: preparations for moving CONFIG_POST to Makefiles
14933 Remove CONFIG_POST ifdefs from the post/ source files.
14935 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14936 Signed-off-by: Wolfgang Denk <wd@denx.de>
14938 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
14939 Author: Stefan Roese <sr@denx.de>
14940 Date: Tue Apr 22 14:14:20 2008 +0200
14942 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
14944 This patch fixes the Canyonlands and Glacier default environment to better
14945 fit to the arch/powerpc device-tree kernels. The variables dealing with
14946 arch/ppc booting are removed, since these boards are supported only in
14947 arch/powerpc. Glacier uses the same config file as Canyonlands.
14949 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
14951 Signed-off-by: Stefan Roese <sr@denx.de>
14953 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
14954 Author: Stefan Roese <sr@denx.de>
14955 Date: Tue Apr 22 14:06:42 2008 +0200
14957 ppc4xx: Small coding style cleanup for the latest esd patches
14959 Signed-off-by: Stefan Roese <sr@denx.de>
14961 commit 79941d63bc03aed8c48d7602f18217cc200ee931
14962 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14963 Date: Mon Apr 21 18:01:07 2008 +0200
14965 ppc4xx: Update CPU strapping for PMC440 boards
14967 This patch removes the temporary 'test' strapping option
14968 of the sbe command. The '667' strapping option now uses
14969 a PLB/PCI divider of 3.
14971 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14973 commit f00cf3193a6635355b121e90debb2f54e777e7da
14974 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14975 Date: Mon Apr 21 14:42:21 2008 +0200
14977 ppc4xx: Remove unused APC405 strataflash driver
14979 The APC405 board support has been migrated to use the common
14982 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14984 commit 1c686676a86473bbd92151f0544e109413f6ed06
14985 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14986 Date: Mon Apr 21 14:42:17 2008 +0200
14988 ppc4xx: Update APC405 configuration
14990 - enable esd's auto_update mechanism
14991 - support alternative flash layout on rev. 1.8 boards
14992 - update default environment
14993 - use common CFI flash driver
14994 - coding style cleanup
14996 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14998 commit 0b9872515a521bf7866dc24b85ddce708e60d702
14999 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15000 Date: Mon Apr 21 14:42:11 2008 +0200
15002 ppc4xx: Update APC405 board support
15004 - enable esd's auto_update mechanism
15005 - fix LCD support on latest hardware revision (uses other LCD controller)
15006 - support alternative flash layout on rev. 1.8 boards
15007 - coding style cleanup
15009 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15011 commit 83975d02e225e231960784972e7820a8b303756b
15012 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15013 Date: Mon Apr 21 14:42:06 2008 +0200
15015 ppc4xx: update esd's common auto_update code for 405 boards
15017 - Coding style cleanup (long lines)
15018 - improve handling of protected flash regions
15021 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15023 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
15024 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15025 Date: Mon Apr 21 14:41:59 2008 +0200
15027 ppc4xx: Update esd's common LCD code for 405 boards
15029 - Coding style cleanup (long lines)
15030 - Add s1d13505 support
15031 - Make some functions return a result code instead of void
15033 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15035 commit dea68189424c3f1242427a8146a3861bf093173c
15036 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15037 Date: Mon Apr 21 11:36:55 2008 +0200
15039 ppc4xx: Update FPGA image for APC405 boards
15041 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15043 commit 2a05b152924acfcec3b037693329e517e6d3578f
15044 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15045 Date: Mon Apr 21 11:36:08 2008 +0200
15047 ppc4xx: Update bootlogo for APC405 boards
15049 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15051 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
15052 Author: Stefan Roese <sr@denx.de>
15053 Date: Fri Apr 18 16:41:31 2008 +0200
15055 ppc4xx: Add dcache_enable() for 440
15057 dcache_enable() was missing for 440 and the patch
15058 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
15059 "] behavior uses this function.
15061 Note: Currently the cache handling functions like
15062 d/icache_disable/enable() are NOP's on 440. This may be changed in the
15065 Signed-off-by: Stefan Roese <sr@denx.de>
15067 commit a49e0d177a0749614b316ec847fb623f09c82c07
15068 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15069 Date: Mon Apr 21 11:19:04 2008 +0200
15071 video: Add missing free for logo memory
15073 This patch adds two missing free()s.
15075 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15077 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
15078 Author: Troy Kisky <troy.kisky@boundarydevices.com>
15079 Date: Mon Sep 24 16:41:43 2007 -0700
15081 PATCH - Fix oob data copied into supplied buffer
15083 This patch correctly sets the oobavail variable
15084 and fixes a bug where the oob data was not valid when
15085 there where multiple groups in oobfree.
15087 First segment fixes a typo
15088 Second segment fixes a bug where oob data may be copied incorrectly.
15089 Third segment adds an error message when exiting due to write protect.
15090 Forth segment fixes a bug where oobavail may be set incorrectly.
15092 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
15094 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
15095 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15096 Date: Fri Apr 18 17:24:32 2008 +0200
15098 ppc4xx: Fix sys_get_info() for 405GP(r)
15100 This patch assigns the correct EBC clock for 405GP(r) CPUs
15101 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
15102 uses an uninitialized EBC clock in its startup message.
15104 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15106 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
15107 Author: Wolfgang Denk <wd@denx.de>
15108 Date: Sun Apr 20 15:39:38 2008 -0700
15110 Makefile: remove nand_spl/System.map when cleaning up.
15112 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
15113 Author: Wolfgang Denk <wd@denx.de>
15114 Date: Sun Apr 20 15:35:52 2008 -0700
15116 MAKEALL: sort entries / lists.
15118 Signed-off-by: Wolfgang Denk <wd@denx.de>
15120 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
15121 Author: Kumar Gala <galak@kernel.crashing.org>
15122 Date: Fri Apr 18 11:29:01 2008 -0500
15124 85xx: Fix size of cpu-release-addr property
15126 The cpu-release-addr is defined as always being a 64-bit quanity regardless
15127 if we are running on a 32-bit or 64-bit machine.
15129 commit 88353a985109562a639b2f8a0c90d77011bfe374
15130 Author: Timur Tabi <timur@freescale.com>
15131 Date: Fri Apr 4 11:15:58 2008 -0500
15133 Fix calculation of I2C clock for some 85xx chips
15135 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
15136 some use CCB/3. There is no pattern that can be used to determine which
15137 chips use which frequency, so the only way to determine is to look up the
15138 actual SOC designation and use the right value for that SOC.
15140 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
15142 Signed-off-by: Timur Tabi <timur@freescale.com>
15144 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
15145 Author: Wolfgang Denk <wd@denx.de>
15146 Date: Fri Apr 18 11:44:27 2008 -0700
15148 Fix build breakage casued by commit c0559be371b2
15150 Change env_get_char from a global function ptr to a function.
15152 Signed-off-by: Wolfgang Denk <wd@denx.de>
15154 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
15155 Author: Wolfgang Denk <wd@denx.de>
15156 Date: Fri Apr 18 10:53:41 2008 -0700
15158 Coding Style cleanup, update CHANGELOG.
15160 Signed-off-by: Wolfgang Denk <wd@denx.de>
15162 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
15163 Author: Mike Frysinger <vapier@gentoo.org>
15164 Date: Tue Apr 8 14:00:57 2008 -0400
15166 Add support for u-boot in svn and localversion-* files
15168 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15170 commit d23ff6827decf121461fbc5622612fd7effe207e
15171 Author: Guennadi Liakhovetski <lg@denx.de>
15172 Date: Thu Apr 3 17:04:22 2008 +0200
15174 MX31ADS network and flash updates
15176 This patch allows U-Boot to use buffered writes to the Spansion NOR
15177 flash installed on this board, and eliminates long delays in network
15178 transfers after the board startup.
15180 Also modify flash layout to embed main and redundant environment
15181 blocks in the U-Boot image.
15183 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15185 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
15186 Author: Guennadi Liakhovetski <lg@denx.de>
15187 Date: Mon Apr 14 10:53:12 2008 +0200
15189 Support for the MX31ADS evaluation board from Freescale
15191 This patch adds support for the MX31ADS evaluation board from Freescale,
15192 initialization code is copied from RedBoot sources, also provided by
15195 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15197 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
15198 Author: Stefan Roese <sr@denx.de>
15199 Date: Tue Apr 8 10:33:29 2008 +0200
15201 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
15203 Signed-off-by: Stefan Roese <sr@denx.de>
15205 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
15206 Author: Stefan Roese <sr@denx.de>
15207 Date: Tue Apr 8 10:33:28 2008 +0200
15209 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
15211 Signed-off-by: Stefan Roese <sr@denx.de>
15213 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
15214 Author: Stefan Roese <sr@denx.de>
15215 Date: Tue Apr 8 10:33:27 2008 +0200
15217 ppc4xx: Add Glacier NAND booting target
15219 Signed-off-by: Stefan Roese <sr@denx.de>
15221 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
15222 Author: Stefan Roese <sr@denx.de>
15223 Date: Tue Apr 8 10:31:00 2008 +0200
15225 nand_spl: Update nand_spl to support 2k page size NAND devices
15227 This patch adds support for booting from 2k page sized NAND device
15228 (e.g. Micron 29F2G08AAC).
15230 Tested on AMCC Canyonlands.
15232 Signed-off-by: Stefan Roese <sr@denx.de>
15234 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
15235 Author: Anatolij Gustschin <agust@denx.de>
15236 Date: Thu Apr 17 18:18:00 2008 +0200
15238 Fix crash on sequoia in ppc_4xx_eth_init
15240 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
15241 with cache enabled (TLB Parity exeption). This patch
15244 Signed-off-by: Anatolij Gustschin <agust@denx.de>
15246 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
15247 Author: Anatolij Gustschin <agust@denx.de>
15248 Date: Thu Apr 17 18:15:27 2008 +0200
15250 ppc4xx: Fix crash on sequoia with cache enabled
15252 Currently U-Boot crashes on sequoia board in CPU POST if
15253 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
15254 won't be disabled by change_tlb before CPU POST because
15255 there is an insufficient adress range check since
15256 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
15259 Signed-off-by: Anatolij Gustschin <agust@denx.de>
15261 commit 43c509254fab375c49936498da944658117ed07c
15262 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15263 Date: Thu Apr 17 23:35:13 2008 +0900
15265 Use jr as register jump instruction
15267 Current assembler codes are inconsistent in the way of register jump
15268 instruction usage; some use jr, some use j. Of course GNU as allows both
15269 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
15270 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
15273 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15275 commit 7ce63709828d37b08866e537339a169bd0db2bd3
15276 Author: Guennadi Liakhovetski <lg@denx.de>
15277 Date: Tue Apr 15 14:15:30 2008 +0200
15279 RTC driver for MC13783
15281 MC13783 is a multifunction IS with an SPI interface to the host. This
15282 driver handles the RTC controller in this chip.
15284 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15286 commit 38254f45b0b412332726c90d3184ad47479fcffb
15287 Author: Guennadi Liakhovetski <lg@denx.de>
15288 Date: Tue Apr 15 14:14:25 2008 +0200
15290 New i.MX31 SPI driver
15292 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
15293 only implemented and tested on i.MX31, can with a modified register layout
15294 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
15297 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15299 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
15300 Author: Magnus Lilja <lilja.magnus@gmail.com>
15301 Date: Tue Apr 15 19:09:10 2008 +0200
15303 Fix name of i.MX31 boards in config file header
15305 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
15307 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
15309 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
15310 Author: Mike Frysinger <vapier@gentoo.org>
15311 Date: Sun Apr 13 19:42:19 2008 -0400
15313 allow ports to override go behavior
15315 Split the arch-specific logic out of the common go code and into a dedicated
15316 weak function called do_go_exec() that lives in cpu directories. This will
15317 need review from i386/nios people to make sure I didn't break them.
15319 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
15320 Author: Mike Frysinger <vapier@gentoo.org>
15321 Date: Sun Apr 13 19:42:18 2008 -0400
15323 allow ports to override bootelf behavior
15325 Change the bootelf setup function into a dedicated weak function called
15326 do_bootelf_exec. This way ports can control the behavior however they
15327 like before/after calling the ELF entry point.
15329 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
15330 Author: Ulf Samuelsson <ulf@atmel.com>
15331 Date: Sat Apr 12 20:56:03 2008 +0200
15333 Reorder ARM boards in Makefile
15335 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
15336 are no longer under ARM92xT header.
15338 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
15339 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15341 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
15342 Author: Ulf Samuelsson <ulf@atmel.com>
15343 Date: Sat Apr 12 20:29:44 2008 +0200
15345 Clean up dataflash partitioning
15347 This patch removes the board dependent parts from
15348 "drivers/mtd/dataflash.c".
15349 Each board relying on this, will have the appropriate
15350 code in a new file, "partition.c" in the board directory.
15351 board Makefiles updated to use the file.
15353 The dataflash partitions are aligned on sector/page boundaries.
15355 The CONFIG_NEW_DF_PARTITION was used to create named partitions
15356 This is now the default operation, and the CONFIG variable is removed.
15358 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
15360 commit 51ecde946fec511a16346e498204ca10ad71080d
15361 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15362 Date: Sat Apr 12 14:08:45 2008 +0200
15364 gitignore: udpate stgit generated and .patch file
15366 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15368 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
15369 Author: Wolfgang Denk <wd@denx.de>
15370 Date: Fri Apr 18 00:15:36 2008 -0700
15372 Get rid of redundant copy of renamed header file.
15374 Signed-off-by: Wolfgang Denk <wd@denx.de>
15376 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
15377 Author: Vlad Lungu <vlad@comsys.ro>
15378 Date: Fri Apr 11 21:20:14 2008 +0300
15380 Fix dependency generation for older gcc versions
15382 With gcc 3.3.3 at least, compilation fails with
15384 Generating include/autoconf.mk
15385 gcc: compilation of header file requested
15386 make: *** [include/autoconf.mk] Error 1
15388 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
15390 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
15392 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
15393 Author: Marian Balakowicz <m8@semihalf.com>
15394 Date: Fri Apr 11 11:07:49 2008 +0200
15396 Restore the ability to continue booting after legacy image overwrite
15398 Before new uImage code was merged, bootm code allowed for the kernel image to
15399 get overwritten during decompresion. new uImage introduced a check for image
15400 overwrites and refused to boot the image that got overwritten. This patch
15401 restores the old behavior. It also adds a warning when the image overwriten is
15402 a multi-image file, because in such case accessing componentes other than the
15403 first one will fail.
15405 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15407 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
15408 Author: Marian Balakowicz <m8@semihalf.com>
15409 Date: Fri Apr 11 11:07:43 2008 +0200
15411 ppc: Fix ftd_blob variable init when processing raw blob
15413 Set fdt_blob variable before its value is printed out.
15415 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15417 commit 3d36be030043cd841a2551d00a395135e363a64b
15418 Author: Jason Wessel <jason.wessel@windriver.com>
15419 Date: Thu Apr 10 14:30:16 2008 -0500
15421 Remove all the search paths from the .lds files.
15423 The cross compiler is responsible for providing the correct libraries
15424 and the logic to find the linking libraries.
15426 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
15428 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
15429 Author: Bartlomiej Sieka <tur@semihalf.com>
15430 Date: Mon Apr 14 15:44:16 2008 +0200
15432 Boot-related documentation update
15434 - document 'bootm_low' and 'bootm_size' environment variables
15435 - update inaccurate CFG_BOOTMAPSZ entry
15437 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15439 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
15440 Author: Guennadi Liakhovetski <lg@denx.de>
15441 Date: Wed Apr 9 17:34:08 2008 +0200
15443 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
15445 Restore logic reverted by commit
15447 commit 80767a6cead9990d9e77e62be947843c2c72f469
15448 Author: Peter Pearse <peter.pearse@arm.com>
15449 Date: Wed Sep 5 16:04:41 2007 +0100
15451 Changed API name to coloured_led.h
15452 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
15453 Tidied other cpu/arm920t/start.S code
15455 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15457 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
15458 Author: Mike Frysinger <vapier@gentoo.org>
15459 Date: Tue Apr 8 10:24:24 2008 -0400
15461 Remove conflicting NAND ID
15463 There are two NAND entries with ID 0xDC and this obviously causes problems.
15464 In the kernel, they punted the first entry, so we should do the same.
15466 See this upstream e-mail for more info:
15467 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
15469 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
15470 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15472 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
15473 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15474 Date: Tue Apr 8 16:20:35 2008 +0900
15476 cpu/mips/cpu.c: Fix flush_cache bug
15478 Cache operations have to take line address (addr), not start_addr.
15479 I noticed this bug when debugging ping failure.
15481 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15483 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
15484 Author: Martin Krause <martin.krause@tqs.de>
15485 Date: Thu Apr 3 14:29:01 2008 +0200
15487 TQM5200: fix default IDE reset level
15489 Before the first call of ide_reset(), the level of the IDE reset
15490 signal on the TQM5200 is low (reset asserted). This patch sets the
15491 default value to high (reset not asserted).
15493 Currently this patch fixes no real problem, but it is cleaner to
15494 assert the reset signal only on demand, and not permanently.
15496 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15498 commit c61e033d6e8abb7b4060ee36060961e1399f6079
15499 Author: Detlev Zundel <dzu@denx.de>
15500 Date: Thu Apr 3 14:18:48 2008 +0200
15502 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
15504 Signed-off-by: Detlev Zundel <dzu@denx.de>
15506 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
15507 Author: Detlev Zundel <dzu@denx.de>
15508 Date: Thu Apr 3 14:18:47 2008 +0200
15510 mgcoge, mgsuv: rename 'addcon' to 'addcons'
15512 The latter name with 13 users is already established, so we will use
15515 Signed-off-by: Detlev Zundel <dzu@denx.de>
15517 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
15518 Author: Martin Krause <martin.krause@tqs.de>
15519 Date: Thu Apr 3 13:37:56 2008 +0200
15521 IDE: fix bug in reset sequence
15523 According to the ata (ata5) specification the RESET- signal
15524 shall be asserted for at least 25 us. Without this patch,
15525 the RESET- signal is asserted on some boards for only < 1 us
15526 (e. g. on the TQM5200). This patch adds a general delay of
15527 25 us to the RESET- signal.
15529 Without this patch a Platinum 4 GiB CF card is not recognised
15530 properly on boards with a TQM5200 (STK52xx, TB5200).
15532 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15534 commit 813bea96a960916c72b4a3a7df840151529c26ce
15535 Author: Sascha Laue <Sascha.Laue@gmx.biz>
15536 Date: Thu Apr 3 14:43:11 2008 +0200
15538 lwmon5: disable CONFIG_ZERO_BOOTDELAY
15540 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
15542 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
15543 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15544 Date: Wed Apr 2 08:03:58 2008 +0200
15546 ds174x: Fix warning on return in rtc_get and rtc_set functions
15548 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15550 commit a253b38bf50c85227c33ca0febc870ee49d1588e
15551 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15552 Date: Wed Apr 2 08:03:57 2008 +0200
15554 cmd_log.c: Fix assignment differ in signedness
15556 In function 'logbuff_init_ptrs':
15557 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
15559 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15561 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
15562 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
15563 Date: Wed Apr 2 11:04:43 2008 +0530
15565 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
15567 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
15569 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
15570 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15571 Date: Tue Apr 1 14:07:10 2008 +0200
15573 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
15575 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15577 commit c08fb3ea36d19b1640b7906264581e9105534399
15578 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
15579 Date: Tue Apr 15 10:24:14 2008 +0200
15581 Additional PCI IDs for IDE and network controllers
15583 These PCI IDs are required by the Linkstation platforms.
15585 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
15587 commit c0559be371b2a64b1a817088c3308688e2182f93
15588 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
15589 Date: Mon Apr 14 23:01:50 2008 +0200
15591 Change env_get_char from a global function ptr to a function.
15593 This avoids an early global data reference.
15595 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
15597 commit 3e0f331c05d72f140715c1e9fca991927e44d422
15598 Author: Guennadi Liakhovetski <lg@denx.de>
15599 Date: Tue Apr 29 12:35:08 2008 +0000
15601 Clean up smsc911x driver
15603 Replace direct register address derefencing with accessor functions.
15604 Restrict explicitly 32-bit bus-width, extend affected configurations
15607 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15608 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15610 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
15611 Author: Sascha Hauer <s.hauer@pengutronix.de>
15612 Date: Tue Apr 15 00:08:20 2008 -0400
15614 This patch adds a driver for the following smsc network controllers:
15622 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15623 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
15624 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15626 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
15627 Author: Sascha Laue <Sascha.Laue@gmx.biz>
15628 Date: Tue Apr 1 15:13:03 2008 +0200
15630 Fix watchdog POST for lwmon5
15632 If the hardware watchdog detects a voltage error, the watchdog sets
15633 GPIO62 to low. The watchdog POST has to detect this low level.
15635 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
15637 commit 24b448448a917e52806f82660a5c9d47608894fb
15638 Author: Dave Liu <r63238@freescale.com>
15639 Date: Tue Apr 1 15:22:11 2008 +0800
15641 ata: update the libata.h from ata.h of linux kernel
15643 Current libata.h of u-boot is out of sync from linux kernel,
15644 this patch make it be consistent with linux kernel.
15646 Signed-off-by: Dave Liu <daveliu@freescale.com>
15647 Signed-off-by: Tor Krill <tor@excito.com>
15649 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
15650 Author: Kumar Gala <galak@kernel.crashing.org>
15651 Date: Mon Mar 31 11:59:27 2008 -0500
15653 Allow use of ARCH=powerpc when building
15655 The linux kernel is now mostly ARCH=powerpc, so to make life easier
15656 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
15658 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15660 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
15661 Author: Kyungmin Park <kmpark@infradead.org>
15662 Date: Mon Mar 31 10:40:54 2008 +0900
15664 Add apollon board MAINTAINERS entry
15666 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15668 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
15669 Author: Kyungmin Park <kmpark@infradead.org>
15670 Date: Mon Mar 31 10:40:36 2008 +0900
15674 It should access with 16-bit instead of 8-bit
15676 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
15678 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15680 commit a9da2b41079d230db3a5641625311983f85ce1fb
15681 Author: Kyungmin Park <kmpark@infradead.org>
15682 Date: Mon Mar 31 10:40:19 2008 +0900
15684 Fix OneNAND erase command
15686 It mis-calculates the block address.
15687 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
15689 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15691 commit 61525f2ffa156665a66908fda47dbf29d65ea579
15692 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
15693 Date: Mon Mar 31 01:32:15 2008 +0200
15695 Support for LinkStation / KuroBox HD and HG PPC models
15697 This patch is based on the port by Mihai Georgian (see linkstation.c for
15698 Copyright information) and implements support for LinkStation / KuroBox HD
15699 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
15700 the moment, pending network driver fixing.
15702 Notice to users: this is pretty much a barebone port. Support for network
15703 on HG models is already in the U-Boot mainline, but you might also want
15704 patches to switch fan / phy modes depending on the negotiated ethernet
15705 parameters. This patch also doesn't support console switching, booting EM
15706 mode, Buffalo specific ext2 magic number. So, if you want to use any of
15707 those, you need additional patches. Otherwise this patche provides a fully
15708 functional u-boot with a network console on your system.
15710 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15712 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
15713 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15714 Date: Sun Mar 30 01:22:13 2008 -0500
15716 Add CONFIG_MII_INIT support to related boards
15718 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
15719 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
15720 that use mii_init() in cmd_init.c.
15722 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15723 Acked-by: Ben Warren <biggerbadderben@gmail.com>
15725 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
15726 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15727 Date: Sun Mar 30 01:19:06 2008 -0500
15729 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
15731 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
15732 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
15734 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15736 commit e99ccb488181d012248c6be30b2093e950319fc5
15737 Author: Kumar Gala <galak@kernel.crashing.org>
15738 Date: Thu Mar 27 11:46:38 2008 -0500
15740 Introduce phys_size_t and move phys_addr_t into asm/types.h
15742 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
15743 that have larger physical addresses like 44x, 85xx, and 86xx.
15745 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15747 commit 20a14a42a25f72e379f38460b8a8484667536795
15748 Author: Andy Fleming <afleming@freescale.com>
15749 Date: Wed Apr 2 16:19:07 2008 -0500
15751 Rename include/md5.h to include/u-boot/md5.h
15753 Some systems have md5.h installed in /usr/include/. This isn't the
15754 desired file (we want the one in include/md5.h). This will avoid the
15755 conflict. This fixes the host tools building problem by creating a new
15756 directory for U-Boot specific header files.
15758 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
15761 Signed-off-by: Wolfgang Denk <wd@denx.de>
15762 Signed-off-by: Andy Fleming <afleming@freescale.com>
15763 Acked-by: Timur Tabi <timur@freescale.com>
15765 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
15766 Author: Dave Liu <r63238@freescale.com>
15767 Date: Thu Mar 27 18:51:17 2008 +0800
15769 drivers: code clean up
15771 Signed-off-by: Dave Liu <daveliu@freescale.com>
15773 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
15774 Author: Dave Liu <r63238@freescale.com>
15775 Date: Thu Mar 27 18:50:41 2008 +0800
15777 drivers: clean up the ata_piix.h
15779 Signed-off-by: Dave Liu <daveliu@freescale.com>
15781 commit e8f7ba404f1409606962815ecc955a06984b08b3
15782 Author: Dave Liu <r63238@freescale.com>
15783 Date: Thu Mar 27 18:49:56 2008 +0800
15785 doc: english polishing for README.sata
15787 according to gvb's suggestion, polishing for the doc.
15789 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
15790 Signed-off-by: Dave Liu <daveliu@freescale.com>
15792 commit 3e3f766a5274d204780460e1879723b565296d34
15793 Author: Kumar Gala <galak@kernel.crashing.org>
15794 Date: Wed Mar 26 18:53:28 2008 -0500
15796 Fix warnings introduced by I2C bus speed setting patch
15798 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15800 commit 3c735e7437150e8615f26930c7819db85634276d
15801 Author: eran liberty <eran.liberty@gmail.com>
15802 Date: Thu Mar 27 00:50:49 2008 +0100
15804 Altera Stratix II support
15806 Adds Support for Altera's Stratix II.
15808 Within your board specific init file you will have to call
15810 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
15811 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
15813 Altera_desc* contines (for example):
15815 Altera_StratixII, /* part type */
15816 passive_serial, /* interface type */
15817 1, /* bytes of data part can accept */
15818 (void *)(&funcs), /* interface function table */
15819 0L, /* base interface address */
15820 0 /* implementation specific cookie */
15823 funcs is the interface. It is of type altera_board_specific_func.
15824 It looks like this:
15825 altera_board_specific_func func = {
15836 you will have to implement these functions, which is usually bit
15839 Signed-off-by: Eran Liberty <liberty@extricom.com>
15841 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
15842 Author: Wolfgang Denk <wd@denx.de>
15843 Date: Sun Apr 13 14:32:54 2008 -0700
15847 Signed-off-by: Wolfgang Denk <wd@denx.de>
15849 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
15850 Author: Sascha Hauer <s.hauer@pengutronix.de>
15851 Date: Wed Mar 26 20:41:17 2008 +0100
15853 Phytec Phycore-i.MX31 support
15855 This patch adds support for the Phytec Phycore-i.MX31 board
15857 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15858 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15860 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
15861 Author: Sascha Hauer <s.hauer@pengutronix.de>
15862 Date: Wed Mar 26 20:41:09 2008 +0100
15864 mx31 litekit support
15866 This patch adds support for the mx31 litekit board
15868 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15869 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15871 commit cdace0661208754a53019ea0dc7b803a040e0939
15872 Author: Sascha Hauer <s.hauer@pengutronix.de>
15873 Date: Wed Mar 26 20:40:49 2008 +0100
15875 add an i2c driver for mx31
15877 This patch adds an i2c driver for Freescale i.MX processors
15879 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15880 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15882 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
15883 Author: Sascha Hauer <s.hauer@pengutronix.de>
15884 Date: Wed Mar 26 20:40:42 2008 +0100
15886 core support for Freescale mx31
15888 This patch adds the core support for Freescale mx31
15890 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15891 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15893 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
15894 Author: Wolfgang Denk <wd@denx.de>
15895 Date: Sun Apr 13 14:19:23 2008 -0700
15899 ...as suggested by Peter Pearse
15901 Signed-off-by: Wolfgang Denk <wd@denx.de>
15903 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
15904 Author: Sascha Hauer <s.hauer@pengutronix.de>
15905 Date: Wed Mar 26 20:40:36 2008 +0100
15907 Separate omap24xx specific code from arm1136
15909 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
15910 to cpu/arm1136/omap24xx.
15912 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15913 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15915 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
15916 Author: Mike Frysinger <vapier@gentoo.org>
15917 Date: Tue Jan 29 18:21:05 2008 -0500
15919 disable caches before booting an app for Blackfin apps
15921 It isn't generally save to execute applications outside of U-Boot with caches
15922 enabled due to the way the Blackfin processor handles caches (requires
15923 software assistance). This patch disables caches before booting an ELF or
15924 just booting raw code. The previous discussion on the patch was that we
15925 wanted to use weaks instead, but that proved to not be feasible when multiple
15926 symbols are involved, which puts us back at the ifdef solution. I've
15927 minimized the ugliness by moving the setup step outside of the main function.
15929 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15931 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
15932 Author: Wolfgang Denk <wd@denx.de>
15933 Date: Sun Apr 13 10:03:54 2008 -0700
15935 ppc: Get rid of unused machine type definitions
15937 Signed-off-by: Wolfgang Denk <wd@denx.de>
15939 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
15940 Author: Wolfgang Denk <wd@denx.de>
15941 Date: Sun Apr 13 09:59:26 2008 -0700
15943 Coding Style cleanup; update CHANGELOG
15945 Signed-off-by: Wolfgang Denk <wd@denx.de>
15947 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
15948 Author: Larry Johnson <lrj@acm.org>
15949 Date: Thu Feb 21 13:58:11 2008 -0500
15951 LM73 bug fix for negative temperatures and cleanup
15953 When the LM73 temperature sensor measures a temperature below 0 C, the
15954 current driver does not perform sign extension, so the result returned is
15955 512 C too high. This patch fixes the problem, and does general cleanup
15958 Signed-off-by: Larry Johnson <lrj@acm.org>
15960 commit 96ef831f713289afba19da0c8f905e99da2b23e0
15961 Author: Guennadi Liakhovetski <lg@denx.de>
15962 Date: Thu Apr 3 13:36:02 2008 +0200
15964 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
15966 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
15967 series require different addresses for buffered write commands. Define a
15968 configuration option to support buffered writes on those chips. A more
15969 elegant solution would be to automatically detect those chips by parsing
15970 their CFI records, but that would require introduction of a fixup table
15971 into the cfi_flash driver.
15973 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15975 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
15976 Author: Lee Nipper <lee.nipper@freescale.com>
15977 Date: Thu Apr 10 09:35:06 2008 -0500
15979 mpc83xx: Update DIMM data bus width test to support 40-bit width
15981 32-bit wide ECC memory modules report 40-bit width.
15982 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
15984 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
15985 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15987 commit 5fb5a689d822ca61e814bd523fc930af335242fa
15988 Author: Dave Liu <r63238@freescale.com>
15989 Date: Mon Mar 31 17:05:12 2008 +0800
15991 mpc83xx: Fix the bug of serdes initialization
15993 Currently the serdes will not be initializated due to the
15996 Signed-off-by: Dave Liu <daveliu@freescale.com>
15997 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15999 commit 2000784818f043db7ca60e2846a72d097766b894
16000 Author: Dave Liu <r63238@freescale.com>
16001 Date: Thu Apr 3 16:28:29 2008 +0800
16003 mpc83xx: Fix the SATA clock setting of 837x targets
16005 Currently the SATA controller clock is configured as CSB clock,
16006 usually the CSB clock is 400/333/266MHz.
16008 However, The SATA IP block is only guaranteed to operate up to
16009 200 MHz as stated in the HW spec.
16011 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
16013 This patch makes the SATA clock as half of CSB clock.
16015 Signed-off-by: Dave Liu <daveliu@freescale.com>
16016 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16018 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
16019 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16020 Date: Wed Apr 2 13:41:21 2008 +0200
16022 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
16024 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16025 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16027 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
16028 Author: Kumar Gala <galak@kernel.crashing.org>
16029 Date: Wed Apr 9 04:20:57 2008 -0500
16031 85xx: Fix detection of MP cpu spin up
16033 We were looking at the wrong memory offset to determine of a secondary
16034 cpu had been spun up or not. Also added a warning message if the
16035 all the secondary cpus we expect don't spin up.
16037 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16039 commit f3e04bdc3f360c66801a9048956e61e41a16edba
16040 Author: Kumar Gala <galak@kernel.crashing.org>
16041 Date: Tue Apr 8 10:45:50 2008 -0500
16043 85xx: Use SVR_SOC_VER instead of SVR_VER
16045 The recent change introduced by 'Update SVR numbers to expand support'
16046 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
16047 to compare against a particular processor id.
16049 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16051 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
16052 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
16053 Date: Fri Apr 11 10:00:35 2008 -0400
16055 ppc4xx: Fix power mgt definitions for PPC440
16057 Corrected DCR addresses of PPC440EP power management registers.
16059 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
16061 commit 950a392464e616b4590bc4501be46e2d7d162dea
16062 Author: Wolfgang Denk <wd@denx.de>
16063 Date: Fri Apr 11 15:11:26 2008 +0200
16065 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
16067 Reverting became necessary after it turned out that the patches in
16068 the u-boot-arm repo were modified, and in some cases corrupted.
16070 This reverts the following commits:
16072 066bebd6353e33af3adefc3404560871699e9961
16073 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
16074 c88ae20580b2b01487b4cdcc8b2a113f551aee36
16075 a147e56f03871bba4f05058d5e04ce7deb010b04
16076 d6674e0e2a6a1f033945f78838566210d3f28c95
16077 8c8463cce44d849e37744749b32d38e1dfb12e50
16078 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
16079 8bf69d81782619187933a605f1a95ee1d069478d
16080 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
16081 a574a73852a527779234e73e17e7597fd8128882
16082 1377b5583a48021d983e1fd565f7d40c89e84d63
16083 1704dc20917b4f71e373e2c888497ee666d40380
16085 Signed-off-by: Wolfgang Denk <wd@denx.de>
16087 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
16088 Author: Stefan Roese <sr@denx.de>
16089 Date: Fri Apr 11 07:02:29 2008 +0200
16091 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
16093 This patch reworks the default environment on Kilauea/Haleakala. Now
16094 "net_nfs" for exmaple uses the device-tree style booting formerly know
16095 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
16096 new image booting support, which check for image overwriting. So the
16097 addresses needed togeet adjusted.
16099 Signed-off-by: Stefan Roese <sr@denx.de>
16101 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
16102 Author: Stefan Roese <sr@denx.de>
16103 Date: Wed Apr 9 11:58:02 2008 +0200
16105 ppc4xx: Fix Canyonlands default environment to work with new image support
16107 Since the new image support checks for image overwriting, the default
16108 environment needs to get adjusted to use correct addresses.
16110 Signed-off-by: Stefan Roese <sr@denx.de>
16112 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
16113 Author: Stefan Roese <sr@denx.de>
16114 Date: Wed Apr 9 11:54:11 2008 +0200
16116 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
16118 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
16119 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
16120 on 4xx systems _start currently cannot be used for this calculation.
16121 So revert back to the original version for now.
16123 Signed-off-by: Stefan Roese <sr@denx.de>
16125 commit f91374f65eae8b42cac329e06ba1c54728278efb
16126 Author: Michal Simek <monstr@monstr.eu>
16127 Date: Fri Mar 28 12:49:52 2008 +0100
16129 microblaze: Sort microblaze boards in MAKEALL script
16131 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
16132 Author: Michal Simek <monstr@monstr.eu>
16133 Date: Fri Mar 28 11:58:45 2008 +0100
16135 microblaze: clean microblaze_config.mk
16137 FLAGS are generated by U-BOOT generator.
16138 Board specific FLAGS are in board directory
16140 Signed-off-by: Michal Simek <monstr@monstr.eu>
16142 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
16143 Author: Michal Simek <monstr@monstr.eu>
16144 Date: Fri Mar 28 12:47:19 2008 +0100
16146 microblaze: xupv2p fix config file for supporting FDT
16148 commit 188dc16b189143573b1ed90e584bf866d75cdd12
16149 Author: Michal Simek <monstr@monstr.eu>
16150 Date: Fri Mar 28 11:53:02 2008 +0100
16152 microblaze: ml401 fix config file for supporting FDT
16154 Signed-off-by: Michal Simek <monstr@monstr.eu>
16156 commit 4c6a6f02e239236261333759997eeaf86b30b54c
16157 Author: Michal Simek <monstr@monstr.eu>
16158 Date: Fri Mar 28 11:22:48 2008 +0100
16160 microblaze: ml401 - add ifdef for GPIO
16162 Signed-off-by: Michal Simek <monstr@monstr.eu>
16164 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
16165 Author: Michal Simek <monstr@monstr.eu>
16166 Date: Fri Mar 28 12:13:03 2008 +0100
16168 microblaze: clean uart16550 and uartlite handling
16170 Signed-off-by: Michal Simek <monstr@monstr.eu>
16172 commit 0b20f250877441460fb79d72192954abe8498834
16173 Author: Michal Simek <monstr@monstr.eu>
16174 Date: Fri Mar 28 11:08:31 2008 +0100
16176 microblaze: Add Emaclite driver to Makefile
16178 Signed-off-by: Michal Simek <monstr@monstr.eu>
16180 commit 868cde5310f88234b774878e4f06e79df10a88b3
16181 Author: Michal Simek <monstr@monstr.eu>
16182 Date: Fri Mar 28 11:08:01 2008 +0100
16184 microblaze: Add Emac driver to Makefile
16186 Signed-off-by: Michal Simek <monstr@monstr.eu>
16188 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
16189 Author: Michal Simek <monstr@monstr.eu>
16190 Date: Fri Mar 28 12:42:29 2008 +0100
16192 microblaze: add Emac ethernet driver
16194 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
16195 Author: Michal Simek <monstr@monstr.eu>
16196 Date: Fri Mar 28 12:41:56 2008 +0100
16198 microblaze: add Emaclite ethernet driver
16200 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
16201 Author: Michal Simek <monstr@monstr.eu>
16202 Date: Fri Mar 28 11:04:01 2008 +0100
16204 microblaze: ML401 and XUPV2P remove emac and emaclite reference
16206 Signed-off-by: Michal Simek <monstr@monstr.eu>
16208 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
16209 Author: Michal Simek <monstr@monstr.eu>
16210 Date: Fri Mar 28 10:59:32 2008 +0100
16212 microblaze: remove old setting for emac driver
16214 Signed-off-by: Michal Simek <monstr@monstr.eu>
16216 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
16217 Author: Michal Simek <monstr@monstr.eu>
16218 Date: Fri Mar 28 10:58:15 2008 +0100
16220 microblaze: Clean Makefile from ancient emac driver
16222 Signed-off-by: Michal Simek <monstr@monstr.eu>
16224 commit ab68f921d9c741830f721c3d879c13a0c5597183
16225 Author: Daniel Hellstrom <daniel@gaisler.com>
16226 Date: Fri Mar 28 10:20:43 2008 +0100
16228 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
16230 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16232 commit 6ed8a43a19bb0275501bc286007daafa923552cf
16233 Author: Daniel Hellstrom <daniel@gaisler.com>
16234 Date: Wed Mar 26 23:38:48 2008 +0100
16236 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
16238 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16240 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
16241 Author: Daniel Hellstrom <daniel@gaisler.com>
16242 Date: Wed Mar 26 23:34:47 2008 +0100
16244 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
16246 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16248 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
16249 Author: Daniel Hellstrom <daniel@gaisler.com>
16250 Date: Fri Mar 28 10:06:52 2008 +0100
16252 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
16254 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16256 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
16257 Author: Daniel Hellstrom <daniel@gaisler.com>
16258 Date: Wed Mar 26 23:26:48 2008 +0100
16260 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
16262 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16264 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
16265 Author: Daniel Hellstrom <daniel@gaisler.com>
16266 Date: Fri Mar 28 10:00:33 2008 +0100
16268 SPARC: Added support for SPARC LEON2 SOC Processor.
16270 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16272 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
16273 Author: Daniel Hellstrom <daniel@gaisler.com>
16274 Date: Wed Mar 26 23:00:38 2008 +0100
16276 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
16278 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16280 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
16281 Author: Daniel Hellstrom <daniel@gaisler.com>
16282 Date: Wed Mar 26 22:51:29 2008 +0100
16284 SPARC: Added support for SPARC LEON3 SOC processor.
16286 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16288 commit bf3d8b31169546fcddb4737391e1893fb12d033a
16289 Author: Daniel Hellstrom <daniel@gaisler.com>
16290 Date: Fri Mar 28 08:29:26 2008 +0100
16292 SPARC: added SPARC support for new uimage in common code.
16294 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16296 commit 00ab32c85405a4fe65fd4128243086210fc90a21
16297 Author: Daniel Hellstrom <daniel@gaisler.com>
16298 Date: Wed Mar 26 22:36:03 2008 +0100
16300 SPARC: added SPARC board information to the command bdinfo.
16302 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16304 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
16305 Author: Daniel Hellstrom <daniel@gaisler.com>
16306 Date: Fri Mar 28 09:47:00 2008 +0100
16308 SPARC: Added generic support for SPARC architecture.
16310 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16312 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
16313 Author: Stefan Roese <sr@denx.de>
16314 Date: Thu Apr 3 14:50:34 2008 +0200
16316 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
16318 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
16319 has 2 RGMII instances and we need to configure the 2nd RGMII instance
16320 for the EMAC2+3 channels.
16322 Signed-off-by: Stefan Roese <sr@denx.de>
16324 commit c2a545ce33b26d80337f80b533828839249fb1c9
16325 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16326 Date: Wed Apr 2 08:03:56 2008 +0200
16328 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
16330 fdt.c: In function 'ft_cpu_setup':
16331 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
16332 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
16333 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
16334 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
16336 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16338 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
16339 Author: Andy Fleming <afleming@freescale.com>
16340 Date: Mon Mar 31 20:45:56 2008 -0500
16342 Fix fdt set command to conform to dts spec
16344 The fdt set command was treating properties specified as <00> and <0011>
16345 as byte streams, rather than as an array of cells. As we already have
16346 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
16347 we should use the <> syntax to describe arrays of cells, which are always
16348 32-bits per element. If we imagine this likely (IMHO) scenario:
16350 > fdt set /ethernet-phy@1 reg <1>
16352 With the old code, this would create a bad fdt, since the reg cell would be
16353 made to be one byte in length. But the cell must be 4 bytes, so this would
16354 break mysteriously.
16356 Also, the dts spec calls for constants inside the angle brackets (<>)
16357 to conform to C constant standards as they pertain to base.
16358 Take this scenario:
16360 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
16362 The old fdt command would complain that it couldn't parse that. Or, if you
16363 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
16366 > fdt set /mydev clock <1f78a40>
16368 Whereas the new code will accept decimal numbers.
16370 While I was in there, I extended the fdt command parser to handle property
16371 strings which are split across multiple arguments:
16373 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
16374 > fdt p /ethernet@f00
16376 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
16379 Lastly, the fdt print code was rearranged slightly to print arrays of cells
16380 if the length of the property is a multiple of 4 bytes, and to not print
16383 Signed-off-by: Andy Fleming <afleming@freescale.com>
16385 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
16386 Author: Stefan Roese <sr@denx.de>
16387 Date: Wed Apr 2 08:39:33 2008 +0200
16389 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
16391 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
16392 interface. This usage can be configured with the jumper J6. This patch
16393 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
16396 Signed-off-by: Stefan Roese <sr@denx.de>
16398 commit 6fe2946f198481254a6ee9600d7456b8316a4083
16399 Author: Kim Phillips <kim.phillips@freescale.com>
16400 Date: Fri Mar 28 17:37:49 2008 -0500
16402 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
16404 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
16405 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
16408 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16410 commit b5873f1732b92a25690e1513b90dfb0d644f6697
16411 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16412 Date: Tue Apr 1 07:30:51 2008 +0200
16414 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
16416 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16418 commit 2d934ea51f276522b532f870a820e844ff480b5b
16419 Author: Tor Krill <tor@excito.com>
16420 Date: Fri Mar 28 15:29:45 2008 +0100
16422 Add Vitesse 8601 support to TSEC driver
16424 Add phy_info for Vitesse VSC8601.
16425 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
16427 Signed-off-by: Tor Krill <tor@excito.com>
16428 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
16429 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16431 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
16432 Author: Daniel Hellstrom <daniel@gaisler.com>
16433 Date: Mon Mar 31 14:25:00 2008 +0000
16435 SPARC: added SMC91111 driver in and out macros for LEON processors.
16437 This patch makes SPARC/LEON processors able to read and write
16438 to the SMC91111 chip using the chip external I/O bus of the memory
16439 controller. This patchs defines the standard in and out macros
16440 expected by the SMC9111 driver.
16442 To access that I/O bus one must set up the memory controller
16443 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
16444 up this correctly when the other MCTRL parameters are set up. It
16445 can be set up from the board configuration header file.
16447 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16448 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16450 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
16451 Author: Stelian Pop <stelian@popies.net>
16452 Date: Wed Mar 26 18:52:34 2008 +0100
16454 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
16456 Signed-off-by: Stelian Pop <stelian@popies.net>
16458 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
16459 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16460 Date: Mon Mar 31 21:31:04 2008 +0200
16462 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
16464 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16466 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
16467 Author: Stelian Pop <stelian@popies.net>
16468 Date: Wed Mar 26 18:52:33 2008 +0100
16470 Add support for AT91SAM9260EK
16472 Support for booting from internal DataFlash, external DataFlash card
16473 or NAND flash is available.
16475 Signed-off-by: Stelian Pop <stelian@popies.net>
16477 commit 1762f13b4aab88b685b1722f17dada247945624b
16478 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16479 Date: Mon Mar 31 21:20:49 2008 +0200
16481 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
16483 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16485 commit 761712188b353494defb2b644491ff73d0daaa6f
16486 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16487 Date: Mon Mar 31 21:12:17 2008 +0200
16489 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
16491 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16493 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
16494 Author: Stelian Pop <stelian@popies.net>
16495 Date: Wed Mar 26 20:52:32 2008 +0100
16497 Port AT91CAP9 to the new headers
16499 Adapt the existing AT91CAP9 code to the new headers and APIs.
16501 Signed-off-by: Stelian Pop <stelian@popies.net>
16503 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
16504 Author: Stelian Pop <stelian@popies.net>
16505 Date: Wed Mar 26 19:52:31 2008 +0100
16507 Finish header files reworking
16509 Replace AT91CAP9.h file with several splitted header files coming
16510 from the Linux kernel.
16512 This is part 2 of the replacement: more header imports and edits.
16514 Signed-off-by: Stelian Pop <stelian@popies.net>
16516 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
16517 Author: Stelian Pop <stelian@popies.net>
16518 Date: Wed Mar 26 19:52:30 2008 +0100
16520 Import several header files from Linux
16522 Replace AT91CAP9.h file with several splitted header files coming
16523 from the Linux kernel.
16525 This is part 1 of the replacement: pristine header files import.
16527 Signed-off-by: Stelian Pop <stelian@popies.net>
16529 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
16530 Author: Stelian Pop <stelian@popies.net>
16531 Date: Wed Mar 26 20:52:28 2008 +0100
16533 Move at91cap9 specific files to at91sam9 directory
16535 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
16536 common infrastructure can be used. Let this infrastructure be
16537 named after the AT91SAM9 family, and move the existing AT91CAP9
16538 files to the new place.
16540 Signed-off-by: Stelian Pop <stelian@popies.net>
16542 commit 61106a565870ff503f92b251b94bd7afef889a04
16543 Author: Stelian Pop <stelian@popies.net>
16544 Date: Wed Mar 26 21:52:27 2008 +0100
16546 Use timer_init() instead of board supplied interrupt_init()
16548 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
16549 the board, so use timer_init() instead of interrupt_init().
16551 Signed-off-by: Stelian Pop <stelian@popies.net>
16553 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
16554 Author: Stelian Pop <stelian@popies.net>
16555 Date: Wed Mar 26 21:52:36 2008 +0100
16557 Cleanup DataFlash partition handling
16559 DataFlash partition information has become a mess. This patch
16560 defines a single partition scheme for Atmel DataFlashes. This partition
16561 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
16563 Signed-off-by: Stelian Pop <stelian@popies.net>
16565 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
16566 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16567 Date: Fri Mar 28 08:47:45 2008 -0500
16569 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
16571 When the version_string function in start.S is not 4-byte align,
16572 it will cause the compiler generates "unaligned opcodes detected
16573 in executable segment". This issue affects all ColdFire CPUs.
16574 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
16577 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16578 Acked-by: John Rigby <jrigby@freescale.com>
16580 commit bae61eefe15b4d454060a7140e49ae58322be803
16581 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16582 Date: Tue Mar 25 15:41:15 2008 -0500
16584 ColdFire: Add dspi and serial flash support for MCF5445x
16586 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16587 Acked-by: John Rigby <jrigby@freescale.com>
16589 commit 48ead7a7a922fceaf494e352abfab8216a41b417
16590 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16591 Date: Tue Mar 18 17:37:01 2008 -0500
16593 ColdFire: Remove R5200 board
16595 This board never went into production
16597 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
16598 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16599 Acked-by: John Rigby <jrigby@freescale.com>
16601 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
16602 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
16603 Date: Thu Jan 24 14:02:32 2008 -0600
16605 ColdFire: Added M5275EVB support.
16607 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
16608 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16609 Acked-by: John Rigby <jrigby@freescale.com>
16611 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
16612 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
16613 Date: Mon Feb 4 15:38:20 2008 -0600
16615 ColdFire: Added MCF5275 cpu support.
16617 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
16618 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16619 Acked-by: John Rigby <jrigby@freescale.com>
16621 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
16622 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16623 Date: Mon Mar 17 12:14:11 2008 -0500
16625 ColdFire: Define bootdelay in configuration file for M52277EVB
16627 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
16628 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16629 Acked-by: John Rigby <jrigby@freescale.com>
16631 commit 77878f16cedee17161ff2336990970fffc6cea35
16632 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16633 Date: Mon Mar 17 12:09:07 2008 -0500
16635 ColdFire: Fix second memory Chipselect for M5475EVB
16637 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16638 Acked-by: John Rigby <jrigby@freescale.com>
16640 commit 43d60642395a550956cb21d287c8cfa563913d28
16641 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16642 Date: Thu Mar 13 14:26:32 2008 -0500
16644 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
16646 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16647 Acked-by: John Rigby <jrigby@freescale.com>
16649 commit eb14ebe813a0cb5d47905228da446a5ad692473b
16650 Author: Larry Johnson <lrj@acm.org>
16651 Date: Sun Mar 30 20:33:04 2008 -0500
16653 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
16655 Signed-off-by: Larry Johnson <lrj@acm.org>
16657 commit 02e3892021112f21067d9ed1d04ae4182725ba52
16658 Author: Stefan Roese <sr@denx.de>
16659 Date: Mon Mar 31 12:20:48 2008 +0200
16661 ppc4xx: Small whitespace fix of esd patches
16663 Signed-off-by: Stefan Roese <sr@denx.de>
16665 commit 034394abb524785047c815f00dde8cdbdc1593c5
16666 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16667 Date: Sun Mar 30 18:52:44 2008 +0200
16669 ppc4xx: Cleanup PMC440 board support
16671 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16673 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
16674 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16675 Date: Sun Mar 30 18:52:06 2008 +0200
16677 ppc4xx: Add ptm configuration variables for PMC440
16679 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
16680 environment variables.
16682 Cleanup pci_target_init.
16684 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16686 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
16687 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16688 Date: Sun Mar 30 18:01:15 2008 +0200
16690 ppc4xx: Minor updates for DU440 boards
16692 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16694 commit d5bffeb868d6b4d462f558dac43011027b6644b7
16695 Author: Mike Frysinger <vapier@gentoo.org>
16696 Date: Tue Feb 19 00:54:20 2008 -0500
16698 Blackfin: cleanup and overhaul common board init functions
16700 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16702 commit b86b3416f874358acaf07519e7620cdb2145f75b
16703 Author: Mike Frysinger <vapier@gentoo.org>
16704 Date: Tue Feb 19 00:50:58 2008 -0500
16706 Blackfin: cleanup lib_blackfin/cache.c
16708 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16710 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
16711 Author: Mike Frysinger <vapier@gentoo.org>
16712 Date: Sun Mar 30 15:46:13 2008 -0400
16714 Blackfin: unify cpu and boot modes
16716 All of the duplicated code for Blackfin processors and boot modes have been
16717 unified. After all, the core is the same for all processors, just the
16718 peripheral set differs (which gets handled in the drivers).
16720 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16722 commit 880cc4381ea8360248cddcdf87a64566745a5724
16723 Author: Stelian Pop <stelian@popies.net>
16724 Date: Wed Mar 26 22:52:35 2008 +0100
16726 Fix CFG_NO_FLASH compilation.
16728 Many Atmel boards have no "real" (NOR) flash on board, and rely only
16729 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
16730 be present in a board configuration file, while still enabling flash
16731 commands like 'flinfo', 'protect', etc.
16733 Signed-off-by: Stelian Pop <stelian@popies.net>
16735 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
16736 Author: Mike Frysinger <vapier@gentoo.org>
16737 Date: Tue Feb 19 00:58:13 2008 -0500
16739 Blackfin: BF537-stamp: cleanup spi flash driver
16741 This punts the old spi flash driver for a new/generalized one until the
16742 common one can be integrated.
16744 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16746 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
16747 Author: Ben Warren <biggerbadderben@gmail.com>
16748 Date: Sun Mar 30 11:34:34 2008 -0400
16750 Fix macro typo in common/cmd_mii.c
16752 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
16753 actually applied the wrong patch.
16755 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16757 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
16758 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16759 Date: Sun Mar 30 16:39:53 2008 +0200
16761 use correct at91rm9200 register name in m501sk board
16763 This fixes a naming bug for at91rm9200 lowlevel init code:
16764 NOR boot flash is on chipselect 0, not chipselect 2. This
16765 makes code use the register name from chip datasheets.
16767 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16769 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
16770 Author: David Brownell <david-b@pacbell.net>
16771 Date: Fri Jan 18 12:55:00 2008 -0800
16773 use correct at91rm9200 register name
16775 This fixes a naming bug for at91rm9200 lowlevel init code:
16776 NOR boot flash is on chipselect 0, not chipselect 2. This
16777 makes code use the register name from chip datasheets.
16779 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
16781 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
16782 Author: David Brownell <david-b@pacbell.net>
16783 Date: Fri Jan 18 12:45:45 2008 -0800
16785 add missing ARM boards to MAKEALL
16787 Add some missing ARM boards to MAKEALL. These build correctly,
16788 unlike several of the boards already listed.
16790 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
16792 commit 066bebd6353e33af3adefc3404560871699e9961
16793 Author: Peter Pearse <peter.pearse@arm.com>
16794 Date: Sun Mar 30 11:34:09 2008 +0100
16796 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
16797 to prevent compilation error.
16799 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
16801 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
16802 Author: Guennadi Liakhovetski <[lg@denx.de]>
16803 Date: Sun Mar 30 11:32:30 2008 +0100
16805 Support for the MX31ADS evaluation board from Freescale
16807 This patch adds support for the MX31ADS evaluation board from Freescale,
16808 initialization code is copied from RedBoot sources, also provided by Freescale.
16810 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16812 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
16813 Author: Sascha Hauer <s.hauer@pengutronix.de>
16814 Date: Sun Mar 30 11:32:27 2008 +0100
16816 Phytec Phycore-i.MX31 support
16818 This patch adds support for the Phytec Phycore-i.MX31 board
16820 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16821 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16823 commit a147e56f03871bba4f05058d5e04ce7deb010b04
16824 Author: Sascha Hauer <s.hauer@pengutronix.de>
16825 Date: Sun Mar 30 11:32:24 2008 +0100
16827 mx31 litekit support
16829 This patch adds support for the mx31 litekit board
16831 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16832 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16834 commit d6674e0e2a6a1f033945f78838566210d3f28c95
16835 Author: Sascha Hauer <s.hauer@pengutronix.de>
16836 Date: Sun Mar 30 11:32:21 2008 +0100
16838 add SMSC LAN9x1x Network driver
16840 This patch adds a driver for the following smsc network controllers:
16848 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16849 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16851 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
16852 Author: Sascha Hauer <s.hauer@pengutronix.de>
16853 Date: Sun Mar 30 11:32:16 2008 +0100
16855 add an i2c driver for mx31
16857 This patch adds an i2c driver for Freescale i.MX processors
16859 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16860 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16862 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
16863 Author: Sascha Hauer <s.hauer@pengutronix.de>
16864 Date: Sun Mar 30 11:30:43 2008 +0100
16866 core support for Freescale mx31
16868 This patch adds the core support for Freescale mx31
16870 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16871 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16873 commit 8bf69d81782619187933a605f1a95ee1d069478d
16874 Author: Sascha Hauer <s.hauer@pengutronix.de>
16875 Date: Sun Mar 30 11:28:46 2008 +0100
16877 Separate omap24xx specific code from arm1136
16879 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
16881 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16882 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16884 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
16885 Author: Peter Pearse <peter.pearse@arm.com>
16886 Date: Sun Mar 30 11:23:05 2008 +0100
16888 Add pmdra into MAKEALL
16890 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
16892 commit a574a73852a527779234e73e17e7597fd8128882
16893 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
16894 Date: Sun Mar 30 11:21:58 2008 +0100
16896 Adds support for the Prodrive PMDRA board, based on a DM6441
16898 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
16900 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
16901 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
16902 Date: Sun Mar 30 11:11:34 2008 +0100
16904 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
16906 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
16908 commit 1704dc20917b4f71e373e2c888497ee666d40380
16909 Author: Dirk Behme <dirk.behme@gmail.com>
16910 Date: Sun Mar 30 11:09:01 2008 +0100
16912 - Remove *_masked() functions as noted by Wolfgang
16913 - Adapt register naming to recent TI spec (sprue26, March 2007)
16914 - Fix reset_timer() handling
16915 - As reported by Pieter [1] the overflow fix introduced a
16916 delay of factor 16 (e.g 2 seconds became 32). While the
16917 overflow fix is basically okay, it missed to divide udelay by
16919 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
16920 - Remove software division of timer count value (DIV(x)
16921 macro) and do it in hardware (TIM_CLK_DIV).
16922 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
16923 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
16924 the hints & testing!
16926 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
16928 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
16930 commit ac3315c26e143c31680750c9c13f027efbcc887e
16931 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16932 Date: Thu Mar 6 16:45:44 2008 +0100
16934 new PHY @ e1000 - 2nd try
16936 Add 82541ER device with latest integrated IGP2 PHY.
16937 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
16939 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16940 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16942 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
16943 Author: Daniel Hellstrom <daniel@gaisler.com>
16944 Date: Fri Mar 28 20:22:53 2008 +0100
16946 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
16948 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
16949 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
16950 available at www.gaisler.com.
16952 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
16953 offloading etc.) can be determined by a bit in the control register.
16954 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
16956 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16957 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16959 commit 233a8bcd94997f3f345833a3b82e836222f2a206
16960 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
16961 Date: Mon Mar 17 17:08:22 2008 -0500
16963 Add CONFIG_MII_INIT in cmd_mii.c
16965 Provide common configuration in do_mii() to execute mii_init()
16966 for all cpu architectures
16968 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16969 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16971 commit f605479de2deb11e834f31dfdb0af107c86aced6
16972 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
16973 Date: Mon Mar 17 17:08:16 2008 -0500
16975 ColdFire: Fix FEC transmit issue for MCF5275
16977 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16978 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16980 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
16981 Author: Aras Vaichas <arasv@magtech.com.au>
16982 Date: Wed Mar 26 09:43:57 2008 +1100
16984 DHCP request fix for Windows Server 2003
16986 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
16987 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
16988 interoperability problems with Windows Server 200x DHCP server when U-Boot
16989 client responds too fast for server to handle.
16991 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
16992 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16994 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
16995 Author: Daniel Hellstrom <daniel@gaisler.com>
16996 Date: Fri Mar 28 20:40:19 2008 +0100
16998 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
17000 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
17001 SPARC CPUs implement flash_read64 which calls __raw_readq.
17003 For current SPARC architectures (LEON2 and LEON3) each read from the
17004 FLASH must lead to a cache miss. This is because FLASH can not be set
17005 non-cacheable since program code resides there, and alternatively disabling
17006 cache is poor from performance view, or doing a cache flush between each
17007 read is even poorer.
17009 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
17010 load alternative space, the alternative space number (ASI) is processor
17011 implementation spcific and can be found by including <asm/processor.h>.
17013 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
17015 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
17016 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
17017 Date: Fri Mar 28 15:41:25 2008 +0100
17019 Make MPC83xx one step closer to full relocation.
17021 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
17022 and use GOT relative reference.
17024 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
17025 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17027 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
17028 Author: Michael Barkowski <michael.barkowski@freescale.com>
17029 Date: Thu Mar 27 14:34:43 2008 -0400
17031 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
17033 This patch fixes eeprom page size so that you can now write more than
17034 64 bytes at a time.
17036 It also makes the board take MAC addresses, if found, from EEPROM.
17038 User should place up to 4 addresses at offset 0x7f00, for
17039 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
17040 four six-byte values should have it's CRC at the end. crc32 and
17041 eeprom commands can be used to accomplish this.
17043 If CRC fails, MAC addresses come from the environment. If CRC
17044 succeeds, the environment is overwritten at startup.
17046 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
17047 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17049 commit 8f325cff31f6e745e6540014b131b9a97f61944c
17050 Author: Michael Barkowski <michael.barkowski@freescale.com>
17051 Date: Fri Mar 28 15:15:38 2008 -0400
17053 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
17055 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
17056 controller on the PCI bus in Linux on the MPC8323ERDB.
17058 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
17061 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
17062 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17064 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
17065 Author: Kim Phillips <kim.phillips@freescale.com>
17066 Date: Fri Mar 28 10:19:07 2008 -0500
17068 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
17070 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
17071 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
17072 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
17073 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
17074 convenience macros.
17076 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17078 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
17079 Author: Kim Phillips <kim.phillips@freescale.com>
17080 Date: Fri Mar 28 10:18:53 2008 -0500
17082 mpc83xx: display ddr frequency in board_add_ram_info banner
17084 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17086 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
17087 Author: Kim Phillips <kim.phillips@freescale.com>
17088 Date: Fri Mar 28 10:18:40 2008 -0500
17090 mpc83xx: unreinvent mem_clk
17092 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
17093 mem_*_clk for consistency's sake.
17095 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17097 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
17098 Author: Kim Phillips <kim.phillips@freescale.com>
17099 Date: Fri Mar 28 14:31:23 2008 -0500
17101 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
17103 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17105 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
17106 Author: Dave Liu <r63238@freescale.com>
17107 Date: Wed Mar 26 22:57:19 2008 +0800
17109 mpc83xx: enable the SATA interface on mpc837xemds board
17111 Enable the first two SATA interfaces on MPC837xEMDS board,
17112 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
17114 Signed-off-by: Dave Liu <daveliu@freescale.com>
17115 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17117 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
17118 Author: Dave Liu <r63238@freescale.com>
17119 Date: Wed Mar 26 22:56:36 2008 +0800
17121 mpc83xx: initialize serdes for MPC837xEMDS boards
17123 This patch is stolen from Anton Vorontsov's patch
17124 for mpc837xerdb boards.
17126 The reference clk and xcorevdd voltage of serdes1/2
17127 is same between mpc837xemds and mpc837xerdb.
17129 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
17130 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
17131 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
17133 Signed-off-by: Dave Liu <daveliu@freescale.com>
17134 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17136 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
17137 Author: Stefan Roese <sr@denx.de>
17138 Date: Fri Mar 28 14:09:04 2008 +0100
17140 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
17142 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
17143 interface. This usage can be configured with the jumper J6. This patch
17144 displays the current configuration upon bootup and changes the PCIe
17145 init loop, to only initialize the availabel PCIe slots.
17147 Signed-off-by: Stefan Roese <sr@denx.de>
17149 commit 90447ecbbac8572457b6d8903073ac3f120995ba
17150 Author: Tor Krill <tor@excito.com>
17151 Date: Fri Mar 28 11:29:10 2008 +0100
17153 MTD/CFI: Add support for 16bit legacy AMD flash
17155 Add entry for 512Kx16 AMD flash to jedec_table.
17156 Read out 16bit device id if chipwidth is 16bit.
17157 Fixed coding style after Stefans feedback
17159 Signed-off-by: Tor Krill <tor@excito.com>
17161 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
17162 Author: Stefan Roese <sr@denx.de>
17163 Date: Fri Mar 28 11:02:53 2008 +0100
17165 ppc: Small change to CFG_MEM_TOP_HIDE description
17167 Signed-off-by: Stefan Roese <sr@denx.de>
17169 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
17170 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17171 Date: Thu Mar 27 15:44:12 2008 +0900
17173 sh: Add support stat structure and stat.h
17175 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17177 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
17178 Author: Mark Jonas <toertel@gmail.com>
17179 Date: Sat Mar 22 19:27:52 2008 +0100
17181 sh: Removed warning when compiling drivers/serial/serial_sh.c.
17183 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
17184 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17186 commit f309fa38929ffba71230c02330ffa42f4bba6333
17187 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17188 Date: Wed Mar 12 18:02:57 2008 +0900
17190 sh: Remove disable_ctrlc function from R7780MP
17192 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17194 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
17195 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17196 Date: Wed Mar 12 17:55:15 2008 +0900
17198 sh: Add maintainer of R7780MP to MAINTAINER file
17200 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
17202 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17204 commit f5e2466f7baa887a7df0c536333eea8231333497
17205 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17206 Date: Tue Mar 25 17:11:24 2008 +0900
17208 sh: Add support Renesas Solutions R2D plus board
17210 R2D plus is SH reference board used with SH7751R.
17211 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
17212 one PCI bus, VGA, and two Ethernet controller.
17214 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17216 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
17217 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17218 Date: Wed Mar 12 12:15:29 2008 +0900
17220 sh: Add support SH4 cache control
17222 Add support SH4 cache control and flash_cache function
17224 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17226 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
17227 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17228 Date: Mon Mar 24 01:53:01 2008 +0900
17230 sh: Add support PCI host driver for SH7751/SH7751R
17232 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17234 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
17235 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17236 Date: Mon Mar 24 02:11:26 2008 +0900
17238 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
17240 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17242 commit 566933278101c144d75361ea682678a326c1290d
17243 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17244 Date: Wed Mar 12 12:10:28 2008 +0900
17246 sh: Add support SuperH SH7751/SH7751R
17248 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17250 commit 3313e0e26224fc9a0c445124f3455058c696df84
17251 Author: Mark Jonas <toertel@gmail.com>
17252 Date: Mon Mar 10 11:37:10 2008 +0100
17254 sh: Added support for SH7720 based board MPR2.
17256 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
17257 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17259 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
17260 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17261 Date: Thu Mar 6 14:05:53 2008 +0900
17263 sh: Fix receive FIFO level register of SH4A
17265 Receive FIFO level register is different in SH4A.
17266 Because register is different, cannot occasionally receive data.
17268 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17270 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
17271 Author: Yusuke Goda <goda.yusuke@renesas.com>
17272 Date: Tue Mar 11 12:55:12 2008 +0900
17274 sh: Add support Renesas Solutions R7780MP
17276 Renesas Solutions R7780MP is a reference board on SH7780.
17277 This board has serial, 10/100 base Ethernet deivice, CF slot
17278 and VGA devices. This board can set extension board.
17279 Extension board has 10/100/1000 base Ethernet device, PCI slot,
17282 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17283 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17285 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
17286 Author: Yusuke Goda <goda.yusuke@renesas.com>
17287 Date: Wed Mar 5 14:30:02 2008 +0900
17289 sh: Add support PCI of SuperH and SH7780
17291 This patch add support PCI of SuperH base code and SH7780 specific code.
17293 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17294 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17296 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
17297 Author: Yusuke Goda <goda.yusuke@renesas.com>
17298 Date: Wed Mar 5 14:23:26 2008 +0900
17300 sh: Add support SH7780
17302 SH7780 is CPU of Renesas Technology.
17306 - DDR-SDRAM controller
17309 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17310 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17312 commit c2042f5952a686c414031309b8f244513bf578f0
17313 Author: goda.yusuke <goda.yusuke@renesas.com>
17314 Date: Fri Jan 25 20:46:36 2008 +0900
17316 sh: Add support Renesas Solutions Migo-R board
17318 Migo-R is a board based on SH7722 and has may devices.
17319 In this patch, supported SCIF, NOR flash and Ethernet.
17321 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17322 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17324 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
17325 Author: Bartlomiej Sieka <tur@semihalf.com>
17326 Date: Thu Mar 27 15:06:40 2008 +0100
17328 Fix host tool build breakage, take two
17330 Revert commit 87c8431f and fix build breakage so that the build continues
17331 to work on FC systems.
17333 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17335 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
17336 Author: Stefan Roese <sr@denx.de>
17337 Date: Wed Mar 19 09:36:47 2008 +0100
17339 ppc4xx: Enable ECC on LWMON5
17341 Since all ECC related problems seem to be resolved on LWMON5, this patch
17342 now enables ECC support.
17344 We have to write the ECC bytes by zeroing and flushing in smaller
17345 steps, since the whole 256MByte takes too long for the external
17348 Signed-off-by: Stefan Roese <sr@denx.de>
17350 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
17351 Author: Larry Johnson <lrj@acm.org>
17352 Date: Mon Mar 17 11:10:35 2008 -0500
17354 ppc4xx: Updates to Korat-specific code
17356 This patch contains updates for changes for the Korat PPC440EPx board.
17357 These changes include:
17359 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
17360 described in the new "doc/README.korat" file;
17362 (2) a new memory map for the registers in the board's CPLD;
17364 (3) a revised format for manufacturer's data in serial EEPROM; and
17366 (4) changes to track updates to U-Boot for the Sequoia board.
17368 Signed-off-by: Larry Johnson <lrj@acm.org>
17370 commit f766cdf89b3a2a7634b8c5869f606150e332036c
17371 Author: Markus Brunner <super.firetwister@gmail.com>
17372 Date: Thu Mar 27 10:46:25 2008 +0100
17374 ppc4xx: PPC405EP Set EMAC noise filter bits
17376 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
17377 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
17378 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
17380 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
17381 Signed-off-by: Stefan Roese <sr@denx.de>
17383 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
17384 Author: Mike Nuss <mike@terascala.com>
17385 Date: Wed Feb 20 11:54:20 2008 -0500
17387 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
17389 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
17390 after startup to change the speed of the clocks. This patch adds the
17391 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
17392 initialization code will reconfigure the PLL to run the system with a CPU
17393 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
17396 Signed-off-by: Mike Nuss <mike@terascala.com>
17397 Acked-by: Stefan Roese <sr@denx.de>
17399 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
17400 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17401 Date: Thu Mar 27 09:12:40 2008 +0100
17403 new-image: Fix host tool build breakage
17405 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17407 commit 6fb4b640562a10daff0dbe537638d511b5b48650
17408 Author: Stefan Roese <sr@denx.de>
17409 Date: Thu Mar 27 10:24:03 2008 +0100
17411 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
17413 Signed-off-by: Stefan Roese <sr@denx.de>
17415 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
17416 Author: Stefan Roese <sr@denx.de>
17417 Date: Wed Mar 19 10:23:43 2008 +0100
17419 ppc4xx: Add fdt support to Prodrive alpr
17421 Since this board will probably be ported to arch/powerpc in the
17422 near future, we add device tree support now. This way we are
17423 "ready" for arch/powerpc from now on.
17425 Signed-off-by: Stefan Roese <sr@denx.de>
17427 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
17428 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
17429 Date: Mon Mar 17 09:27:56 2008 +0100
17431 ppc4xx: Enable cache support on the ALPR board
17433 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
17435 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
17436 Author: Stefan Roese <sr@denx.de>
17437 Date: Wed Mar 26 10:14:11 2008 +0100
17439 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
17441 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
17442 memory area will get subtracted from the top (end) of ram and won't get
17443 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
17444 should gets passed the now "corrected" memory size and won't touch it
17445 either. This should work for arch/ppc and arch/powerpc. Only Linux board
17446 ports in arch/powerpc with bootwrapper support, which recalculate the
17447 memory size from the SDRAM controller setup, will have to get fixed
17448 in Linux additionally.
17450 This patch enables this config option on some PPC440EPx boards as a workaround
17451 for the CHIP 11 errata. Here the description from the AMCC documentation:
17453 CHIP_11: End of memory range area restricted access.
17457 The 440EPx DDR controller does not acknowledge any
17458 transaction which is determined to be crossing over the
17459 end-of-memory-range boundary, even if the starting address is
17460 within valid memory space. Any such transaction from any PLB4
17461 master will result in a PLB time-out on PLB4 bus.
17464 In case of such misaligned bursts, PLB4 masters will not
17465 retrieve any data at all, just the available data up to the
17466 end of memory, especially the 440 CPU. For example, if a CPU
17467 instruction required an operand located in memory within the
17468 last 7 words of memory, the DCU master would burst read 8
17469 words to update the data cache and cross over the
17470 end-of-memory-range boundary. Such a DCU read would not be
17471 answered by the DDR controller, resulting in a PLB4 time-out
17472 and ultimately in a Machine Check interrupt. The data would
17473 be inaccessible to the CPU.
17476 Forbid any application to access the last 256 bytes of DDR
17477 memory. For example, make your operating system believe that
17478 the last 256 bytes of DDR memory are absent. AMCC has a patch
17479 that does this, available for Linux.
17481 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
17482 lwmon5, korat, sequoia
17484 The other remaining 440EPx board were intentionally not included
17485 since it is not clear to me, if they use the end of ram for some
17486 other purpose. This is unclear, since these boards have CONFIG_PRAM
17487 defined and even comments like this:
17490 /* esd expects pram at end of physical memory.
17491 * So no logbuffer at the moment.
17494 It is strongly recommended to not use the last 256 bytes on those
17495 boards too. Patches from the board maintainers are welcome.
17497 Signed-off-by: Stefan Roese <sr@denx.de>
17499 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
17500 Author: Stefan Roese <sr@denx.de>
17501 Date: Thu Mar 27 10:09:05 2008 +0100
17503 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
17505 Signed-off-by: Stefan Roese <sr@denx.de>
17507 commit d56a3ce179688cde61073a3690e21703d68fafd7
17508 Author: Stefan Roese <sr@denx.de>
17509 Date: Tue Mar 25 17:51:13 2008 +0100
17511 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
17513 The routine ft_board_setup() configures the EBC NOR mappings for the
17514 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
17515 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
17516 problem, we need to pass the corrected address here too.
17518 Signed-off-by: Stefan Roese <sr@denx.de>
17520 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
17521 Author: Stefan Roese <sr@denx.de>
17522 Date: Wed Mar 19 16:35:12 2008 +0100
17524 ppc4xx: Fix compilation warning in 4xx_enet.c
17526 Signed-off-by: Stefan Roese <sr@denx.de>
17528 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
17529 Author: Stefan Roese <sr@denx.de>
17530 Date: Wed Mar 19 16:20:49 2008 +0100
17532 ppc4xx: Add AMCC Glacier 406GT eval board support
17534 This patch adds support for the AMCC Glacier 460GT eval board.
17535 The main difference to the Canyonlands board are listed here:
17537 - 4 ethernet ports instead of 2
17541 Currently EMAC2+3 are not working. This will be fixed in a later
17544 Signed-off-by: Stefan Roese <sr@denx.de>
17546 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
17547 Author: Stefan Roese <sr@denx.de>
17548 Date: Thu Mar 27 08:47:26 2008 +0100
17550 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
17552 Signed-off-by: Stefan Roese <sr@denx.de>
17554 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
17555 Author: Anatolij Gustschin <agust@denx.de>
17556 Date: Wed Mar 26 21:05:43 2008 +0100
17558 Fix out of tree building issue
17560 Currently U-Boot building in some external directory
17561 doesn't work. This patch tries to fix the problem.
17563 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17565 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
17566 Author: Anatolij Gustschin <agust@denx.de>
17567 Date: Wed Mar 26 18:13:33 2008 +0100
17569 README: update documentation (availability, links, etc.)
17573 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17575 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
17576 Author: Anatolij Gustschin <agust@denx.de>
17577 Date: Wed Mar 26 17:47:44 2008 +0100
17579 Fix compilation error in cmd_usb.c
17581 This patch fixes compilation error
17582 cmd_usb.c: In function 'do_usb':
17583 cmd_usb.c:552: error: void value not ignored as it ought to be
17585 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17587 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
17588 Author: Timur Tabi <timur@freescale.com>
17589 Date: Fri Mar 14 17:45:29 2008 -0500
17591 Add support for setting the I2C bus speed in fsl_i2c.c
17593 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
17594 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
17595 but fsl_i2c.c ignores it and uses conservative value when programming the
17598 Signed-off-by: Timur Tabi <timur@freescale.com>
17599 Acked-by: Andy Fleming <afleming@freescale.com>
17601 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
17602 Author: Wolfgang Denk <wd@denx.de>
17603 Date: Thu Mar 27 00:03:57 2008 +0100
17605 Coding style cleanup, update CHANGELOG
17607 Signed-off-by: Wolfgang Denk <wd@denx.de>
17609 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
17610 Author: Dave Liu <r63238@freescale.com>
17611 Date: Wed Mar 26 22:55:32 2008 +0800
17613 drivers: add the support for Freescale SATA controller
17615 Add the Freescale on-chip SATA controller driver to u-boot,
17616 The SATA controller is used on the 837x and 8315 targets,
17617 The driver can be used to load kernel, fs and dtb.
17620 - 1.5/3 Gbps link speed
17621 - LBA48, LBA28 support
17622 - DMA and FPDMA support
17623 - Two ports support
17625 Signed-off-by: Dave Liu <daveliu@freescale.com>
17627 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
17628 Author: Dave Liu <r63238@freescale.com>
17629 Date: Wed Mar 26 22:54:44 2008 +0800
17631 ata: add the readme for SATA command line
17633 Signed-off-by: Dave Liu <daveliu@freescale.com>
17635 commit cd54081cd479e542fc399b8a40651ff11a1ad849
17636 Author: Dave Liu <r63238@freescale.com>
17637 Date: Wed Mar 26 22:53:24 2008 +0800
17639 ata: enable the sata initialize on boot up
17641 Signed-off-by: Dave Liu <daveliu@freescale.com>
17643 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
17644 Author: Dave Liu <r63238@freescale.com>
17645 Date: Wed Mar 26 22:52:36 2008 +0800
17647 ata: add the fis struct for SATA
17649 Signed-off-by: Dave Liu <daveliu@freescale.com>
17651 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
17652 Author: Dave Liu <r63238@freescale.com>
17653 Date: Wed Mar 26 22:51:44 2008 +0800
17655 ata: add the libata support
17657 add simple libata support in u-boot
17659 Signed-off-by: Dave Liu <daveliu@freescale.com>
17661 commit 8e9bb43429e50df55fa41932cbe65841ff579220
17662 Author: Dave Liu <r63238@freescale.com>
17663 Date: Wed Mar 26 22:50:45 2008 +0800
17665 ata: make the ata_piix driver using new SATA framework
17667 original ata_piix driver is using IDE framework, not real
17668 SATA framework. For now, the ata_piix driver is only used
17669 by x86 sc520_cdp board. This patch makes the ata_piix driver
17670 use the new SATA framework, so
17672 - remove the duplicated command stuff
17673 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
17674 - add the CONFIG_CMD_SATA define to sc520_cdp.h
17676 Signed-off-by: Dave Liu <daveliu@freescale.com>
17678 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
17679 Author: Dave Liu <r63238@freescale.com>
17680 Date: Wed Mar 26 22:49:44 2008 +0800
17682 ata: add the support for SATA framework
17684 - add the SATA framework
17685 - add the SATA command line
17687 Signed-off-by: Dave Liu <daveliu@freescale.com>
17689 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
17690 Author: Dave Liu <r63238@freescale.com>
17691 Date: Wed Mar 26 22:48:18 2008 +0800
17693 ata: merge the header of ata_piix driver
17695 move the sata.h from include/ to drivers/block/ata_piix.h
17697 Signed-off-by: Dave Liu <daveliu@freescale.com>
17699 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
17700 Author: Dave Liu <r63238@freescale.com>
17701 Date: Wed Mar 26 22:47:06 2008 +0800
17703 ata: merge the ata_piix driver
17705 move the cmd_sata.c from common/ to drivers/ata_piix.c,
17706 the cmd_sata.c have some part of ata_piix controller drivers.
17707 consolidate the driver to have better framework.
17709 Signed-off-by: Dave Liu <daveliu@freescale.com>
17711 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
17712 Author: Markus Klotzbuecher <mk@denx.de>
17713 Date: Wed Mar 26 18:26:43 2008 +0100
17715 USB, Storage: fix a bug introduced in commit
17716 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
17717 to only print only information on one storage device, but not for
17720 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17722 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
17723 Author: Anatolij Gustschin <agust@denx.de>
17724 Date: Wed Mar 26 17:47:44 2008 +0100
17726 Fix compilation error in cmd_usb.c
17728 This patch fixes compilation error
17729 cmd_usb.c: In function 'do_usb':
17730 cmd_usb.c:552: error: void value not ignored as it ought to be
17732 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17733 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17735 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
17736 Author: Kumar Gala <galak@kernel.crashing.org>
17737 Date: Wed Mar 26 08:53:53 2008 -0500
17739 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
17741 Provide a board_lmb_reserve helper function to ensure we reserve
17742 the page of memory we are using for the boot page translation code.
17744 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17746 commit 79679d80021ab095e639e250ca472fe526da02e2
17747 Author: Kumar Gala <galak@kernel.crashing.org>
17748 Date: Wed Mar 26 08:34:25 2008 -0500
17750 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
17752 The following changes are needed to be inline with ePAPR v0.81:
17754 * r4, r5 and now always set to 0 on boot release
17755 * r7 is used to pass the size of the initial map area (IMA)
17756 * EPAPR_MAGIC value changed for book-e processors
17757 * changes in the spin table layout
17758 * spin table supports a 64-bit physical release address
17760 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17762 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
17763 Author: Jon Loeliger <jdl@freescale.com>
17764 Date: Wed Mar 19 15:02:07 2008 -0500
17766 FSL: Clean up board/freescale/common/Makefile
17768 Each file that can be built here now follows some
17769 CONFIG_ option so that they are appropriately built
17770 or not, as needed. And CONFIG_ defines were added
17771 to various board config files to make sure that happens.
17773 The other board/freescale/*/Makefiles no longer need
17774 to reach up and over into ../common to build their
17775 individually needed files any more.
17777 Boards that are CDS specific were renamed with cds_ prefix.
17779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17781 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
17782 Author: Kumar Gala <galak@kernel.crashing.org>
17783 Date: Wed Feb 27 22:00:27 2008 -0600
17785 85xx: Fix merge duplication
17787 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
17789 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17791 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
17792 Author: James Yang <James.Yang@freescale.com>
17793 Date: Tue Feb 12 16:35:07 2008 -0600
17795 85xx: Expand CCSR space with more DDR controller registers.
17797 Signed-off-by: James Yang <James.Yang@freescale.com>
17798 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17799 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17801 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
17802 Author: James Yang <James.Yang@freescale.com>
17803 Date: Fri Feb 8 18:05:08 2008 -0600
17805 85xx: Speed up get_ddr_freq() and get_bus_freq()
17807 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
17808 called. However, get_sys_info() recalculates extraneous information when
17809 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
17810 values from global_data instead.
17812 Signed-off-by: James Yang <James.Yang@freescale.com>
17813 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17815 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
17816 Author: James Yang <James.Yang@freescale.com>
17817 Date: Fri Feb 8 16:46:27 2008 -0600
17819 85xx: Show DDR memory data rate in addition to the memory clock frequency.
17821 Show the DDR memory data rate in addition to the memory clock
17822 frequency. For DDR/DDR2 memories the memory data rate is 2x the
17825 Signed-off-by: James Yang <James.Yang@freescale.com>
17826 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17828 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
17829 Author: James Yang <James.Yang@freescale.com>
17830 Date: Fri Feb 8 16:44:53 2008 -0600
17832 85xx: get_tbclk() speed up and rounding fix
17834 Speed up get_tbclk() by referencing pre-computed bus clock
17835 frequency value from global data instead of sys_info_t. Fix
17836 rounding of result to nearest; previously it was rounding
17839 Signed-off-by: James Yang <James.Yang@freescale.com>
17840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17842 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
17843 Author: Andy Fleming <afleming@freescale.com>
17844 Date: Wed Feb 6 01:19:40 2008 -0600
17846 Update SVR numbers to expand support
17848 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
17849 is used to distinguish certain variants within an SOC family. To
17850 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
17851 constants to reflect the larger value. We also add SVR numbers for all
17852 of the current variants. Finally, to make things neater, rather than
17853 use an enormous switch statement to print out the CPU type, we create
17854 and array of SVR/name pairs (using a macro), and print out the CPU name
17855 that matches the SVR SOC version.
17857 Signed-off-by: Andy Fleming <afleming@freescale.com>
17859 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
17860 Author: Andy Fleming <afleming@freescale.com>
17861 Date: Wed Feb 6 01:12:57 2008 -0600
17863 Add the Freescale PCI device IDs
17865 Signed-off-by: Andy Fleming <afleming@freescale.com>
17867 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
17868 Author: Kumar Gala <galak@kernel.crashing.org>
17869 Date: Thu Feb 14 11:04:23 2008 -0600
17871 85xx: Added support for multicore boot mechanism
17873 Added the cpu command that provides a generic mechanism to get status,
17874 reset, and release secondary cores in multicore processors.
17876 Added support for using the ePAPR defined spin-table mechanism on 85xx.
17878 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17879 Signed-off-by: Andy Fleming <afleming@freescale.com>
17881 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
17882 Author: Kumar Gala <galak@kernel.crashing.org>
17883 Date: Thu Jan 17 16:48:33 2008 -0600
17885 85xx: Added support for multicore boot mechanism
17887 Added the cpu command that provides a generic mechanism to get status,
17888 reset, and release secondary cores in multicore processors.
17890 Added support for using the ePAPR defined spin-table mechanism on 85xx.
17892 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17894 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
17895 Author: Kumar Gala <galak@kernel.crashing.org>
17896 Date: Wed Jan 30 14:55:14 2008 -0600
17898 85xx: Add the concept of CFG_CCSRBAR_PHYS
17900 When we go to 36-bit physical addresses we need to keep the concept of
17901 the physical CCSRBAR address seperate from the virtual one.
17903 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
17905 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17907 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
17908 Author: Wolfgang Denk <wd@denx.de>
17909 Date: Wed Mar 26 15:38:47 2008 +0100
17911 Coding style cleanup.
17913 Signed-off-by: Wolfgang Denk <wd@denx.de>
17915 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
17916 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
17917 Date: Wed Mar 26 13:02:13 2008 +0100
17919 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
17921 The default settings for RTC DS1337 keeps the OSC
17922 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
17925 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
17927 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
17928 Author: Wolfgang Denk <wd@denx.de>
17929 Date: Wed Mar 26 11:48:46 2008 +0100
17931 Cleanup coding style, update CHANGELOG
17933 Signed-off-by: Wolfgang Denk <wd@denx.de>
17935 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
17936 Author: Wolfgang Denk <wd@denx.de>
17937 Date: Wed Mar 26 10:40:12 2008 +0100
17939 README: update documentation (availability, links, etc.)
17941 Signed-off-by: Wolfgang Denk <wd@denx.de>
17943 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
17944 Author: Aras Vaichas <arasv@magtech.com.au>
17945 Date: Tue Mar 25 12:09:07 2008 +1100
17947 USB Storage, add meaningful return value
17949 This patch changes the "usb storage" command to return success if it
17950 finds a USB storage device, otherwise it returns error.
17952 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17954 commit 18e69a35efbb078403db0c0063986470dad7d082
17955 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17956 Date: Fri Mar 14 23:20:18 2008 +0300
17958 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
17960 Linux understands "host" (default), "peripheral" and "otg" (broken).
17961 Though, U-Boot doesn't restrict dr_mode variable to these values (think
17962 of renames in future).
17964 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17965 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17967 commit c7604783b236e368f225efb7b3efb418fe20b404
17968 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17969 Date: Fri Mar 14 23:20:30 2008 +0300
17971 tsec: fix link detection for the RTL8211B PHY
17973 RTL8211B sets link state register after autonegotiation complete,
17974 so with bootdelay=0 RTL8211B will report lack of the link.
17976 To fix this, we should wait for aneg to complete, even if the
17977 link is currently down.
17979 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17980 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17982 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
17983 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17984 Date: Mon Mar 24 20:47:09 2008 +0300
17986 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
17988 device_type = "soc" is being deprecated, newer device trees will use
17989 "fsl,soc" and/or "fsl,immr" for the soc nodes.
17991 This patch also adds clock-frequency property for soc nodes (the same
17992 value as bus-frequency).
17994 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17996 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
17997 Author: Joe D'Abbraccio <ljd015@freescale.com>
17998 Date: Mon Mar 24 13:00:59 2008 -0400
18000 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
18002 With the original value of 1/2 clock cycle delay, the system ran relatively
18003 stable except when we run benchmarks that are intensive users of memory.
18004 When I run samba connected disk with a HDBENCH test, the system locks-up
18005 or reboots sporadically.
18007 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
18009 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
18010 Author: Scott Wood <scottwood@freescale.com>
18011 Date: Mon Mar 24 12:44:13 2008 -0500
18013 mpc83xx: Set PCI I/O bus-address base to zero.
18015 The device trees for these boards describe PCI I/O as starting from
18016 address zero from the device's perspective.
18018 Placing I/O elsewhere may cause problems with certain PCI boards, and may
18019 cause problems with Linux.
18021 Signed-off-by: Scott Wood <scottwood@freescale.com>
18023 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
18024 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18025 Date: Mon Mar 24 20:47:05 2008 +0300
18027 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
18029 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
18030 This patch fixes "system time drifting" problem.
18032 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18034 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
18035 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18036 Date: Mon Mar 24 20:47:02 2008 +0300
18038 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
18040 This is needed to update /choosen/linux,stdout-path properly.
18042 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18044 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
18045 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18046 Date: Mon Mar 24 20:47:00 2008 +0300
18048 mpc83xx: MPC8360E-RDK: add dhcp command
18050 Plus modify environment to use it and remove bootfile env variable,
18051 it is internal and CONFIG_BOOTFILE is used for these purposes.
18053 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18055 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
18056 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18057 Date: Mon Mar 24 20:46:57 2008 +0300
18059 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
18061 Current DDR setup easily causes memory corruption, this patch fixes it.
18063 Also fix TIMING_CFG0_MRS_CYC definition.
18065 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18067 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
18068 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18069 Date: Mon Mar 24 20:46:53 2008 +0300
18071 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
18073 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
18074 controller and FHCI (QE USB).
18076 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18078 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
18079 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18080 Date: Mon Mar 24 20:46:51 2008 +0300
18082 mpc83xx: MPC8360E-RDK: add support for NAND
18084 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18086 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
18087 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18088 Date: Mon Mar 24 20:46:46 2008 +0300
18090 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
18092 This is needed for BCM PHYs to work on this board.
18094 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18096 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
18097 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18098 Date: Mon Mar 24 20:46:34 2008 +0300
18100 uec: add support for Broadcom BCM5481 Gigabit PHY
18102 This patch adds basic support for Broadcom BCM5481 PHY.
18104 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
18105 Peter Barada <peterb@logicpd.com>.
18107 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18109 commit 6a600c3a1876bc203445df4f0fd6b12648259666
18110 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18111 Date: Mon Mar 24 20:46:28 2008 +0300
18113 uec: add support for RGMII_RXID interface mode
18115 PHY drivers will use it to setup software delay between RXD and RXC
18118 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18120 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
18121 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18122 Date: Mon Mar 24 20:46:24 2008 +0300
18124 uec: add support for gbit mii status readings
18126 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18128 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
18129 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18130 Date: Mon Mar 24 17:40:47 2008 +0300
18132 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
18134 This is primarily for the early console support.
18136 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18138 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
18139 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18140 Date: Mon Mar 24 17:40:43 2008 +0300
18142 83xx: initialize serdes for MPC837XRDB boards
18144 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
18145 On the MPC8378ERDB: 2 PCI-E
18146 On the MPC8379ERDB: 4 SATA
18148 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18150 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
18151 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18152 Date: Mon Mar 24 17:40:32 2008 +0300
18154 83xx: serdes setup routines
18156 This patch adds few routines to configure serdes on 837x targets.
18158 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18160 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
18161 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18162 Date: Mon Mar 24 17:40:27 2008 +0300
18164 83xx: split COBJS onto separate lines
18166 ..plus get rid of some #ifdefs in the .c files.
18168 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18170 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
18171 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
18172 Date: Mon Mar 24 17:40:23 2008 +0300
18174 83xx: nand support for MPC837XRDB boards
18176 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
18178 commit 82e45a204190593e8613145a928f998fb8c909c4
18179 Author: Jerry Van Baren <gvb.uboot@gmail.com>
18180 Date: Tue Mar 18 21:44:41 2008 -0400
18182 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
18184 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18185 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18187 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
18188 Author: Michael Barkowski <michael.barkowski@freescale.com>
18189 Date: Thu Mar 20 13:15:39 2008 -0400
18191 mpc8323erdb: remove RTC and add EEPROM
18193 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
18195 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
18196 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18198 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
18199 Author: Michael Barkowski <michael.barkowski@freescale.com>
18200 Date: Thu Mar 20 13:15:34 2008 -0400
18202 mpc8323erdb: Improve the system performance
18204 The following changes are based on kernel UCC ethernet performance:
18206 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
18207 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
18208 switch to enable this setting.
18210 The following changes are based on the App Note AN3369 and
18211 verified to improve memory latency using LMbench:
18213 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
18214 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
18216 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
18217 Twr=15ns, and this was already the setting in DDR_MODE)
18218 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
18220 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
18222 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
18224 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
18226 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
18228 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
18231 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
18232 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18234 commit fc549c871f43933396a5b3e21d897023d4b31b8d
18235 Author: Michael Barkowski <michael.barkowski@freescale.com>
18236 Date: Thu Mar 20 13:15:28 2008 -0400
18238 mpc8323erdb: use readable DDR config macros
18240 Use available shift/mask macros to define DDR configuration.
18242 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
18243 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18245 commit 89c7784ed90ba50301eec521144f95111e472906
18246 Author: Timur Tabi <timur@freescale.com>
18247 Date: Fri Feb 8 13:15:55 2008 -0600
18249 83xx: Add Vitesse VSC7385 firmware uploading
18251 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
18252 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
18253 Cleaned up the board header files to make selecting the VSC7385 easier to
18256 Signed-off-by: Timur Tabi <timur@freescale.com>
18257 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18259 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
18260 Author: Timur Tabi <timur@freescale.com>
18261 Date: Fri Feb 8 13:15:54 2008 -0600
18263 NET: Add Vitesse VSC7385 firmware uploading
18265 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
18266 and other boards. A small firwmare must be uploaded to its on-board memory
18267 before it can be enabled. This patch adds the code which uploads firmware
18268 (but not the firmware itself).
18270 Previously, this feature was provided by a U-Boot application that was
18271 made available only on Freescale BSPs. The VSC7385 firmware must still
18272 be obtained separately, but at least there is no longer a need for a separate
18275 Signed-off-by: Timur Tabi <timur@freescale.com>
18276 Acked-by: Ben Warren <biggerbadderben@gmail.com>
18278 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
18279 Author: Wolfgang Denk <wd@denx.de>
18280 Date: Wed Mar 26 00:52:10 2008 +0100
18282 Coding Style cleanyp; update CHANGELOG
18284 Signed-off-by: Wolfgang Denk <wd@denx.de>
18286 commit 43ddd9c820fec44816188f53346b464e20b3142d
18287 Author: Jerry Van Baren <gvb.uboot@gmail.com>
18288 Date: Sat Mar 22 14:23:49 2008 -0400
18290 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
18292 These defines embedded the u-boot env variables and/or the bd_t structure
18293 in the fdt blob. The conclusion of discussion on the u-boot email list
18294 was that embedding these in the fdt blob is not useful: there are better
18295 ways of passing the data (in fact, the fdt blob itself replaces the
18298 The only board that enables these is the stxxtc and they don't appear
18299 to be used by linux.
18301 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18302 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18304 commit 22ed2285743359fd1fe73e411dff914b2256e68f
18305 Author: Stefan Roese <sr@denx.de>
18306 Date: Mon Mar 17 10:49:25 2008 +0100
18308 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
18310 Signed-off-by: Stefan Roese <sr@denx.de>
18312 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
18313 Author: Kyungmin Park <kmpark@infradead.org>
18314 Date: Mon Mar 17 08:54:06 2008 +0900
18316 Add Flex-OneNAND booting support
18318 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
18319 using a NOR Flash interface. This on-chip integration enables system designers
18320 to reduce external system logic and use high-density NAND Flash
18321 in applications that would otherwise have to use more NOR components.
18323 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
18324 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
18325 that require low reliability and high density, SLC area of Flex-OneNAND
18326 to store data that need high reliability and high performance. Flex-OneNAND
18327 can let users take advantage of storing these two different types of data
18328 into one chip, which is making Flex-OneNAND more cost- and space-effective.
18330 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
18332 commit c512389cc4a10253249271ff6c887c6dab1f0db2
18333 Author: André Schwarz <andre.schwarz@matrix-vision.de>
18334 Date: Thu Mar 13 13:50:52 2008 +0100
18336 MPC5200: support setup without FEC
18338 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
18339 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
18341 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
18342 Acked-by: Grant Likely <grant.likely@secretlab.ca>
18344 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
18345 Author: Jon Loeliger <jdl@freescale.com>
18346 Date: Wed Mar 5 18:05:46 2008 -0600
18348 FSL: Move board/mpc8266ads under board/freescale
18350 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18352 commit 7f1d846e5c5754449c286587d099d85246062772
18353 Author: Jon Loeliger <jdl@freescale.com>
18354 Date: Wed Mar 5 18:05:47 2008 -0600
18356 FSL: Move board/mpc7448hpc2 under board/freescale
18358 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18360 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
18361 Author: Jon Loeliger <jdl@freescale.com>
18362 Date: Wed Mar 5 18:05:45 2008 -0600
18364 FSL: Move board/mpc8260ads under board/freescale
18366 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18368 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
18369 Author: goda.yusuke <goda.yusuke@renesas.com>
18370 Date: Wed Mar 5 17:08:33 2008 +0900
18372 net: Add support AX88796L ethernet device
18374 AX88796L is device of NE2000 compatible.
18375 This patch support AX88796L ethernet device.
18377 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
18378 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18380 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
18381 Author: Wolfgang Denk <wd@denx.de>
18382 Date: Tue Mar 25 22:50:41 2008 +0100
18384 ne2000 driver: change #ifdef to Makefile conditional compilation
18386 Signed-off-by: Wolfgang Denk <wd@denx.de>
18388 commit e710185aae90c64d39c2d453e40e58ceefe4f250
18389 Author: goda.yusuke <goda.yusuke@renesas.com>
18390 Date: Wed Mar 5 17:08:20 2008 +0900
18392 net: Divided code of NE2000 ethernet driver
18394 There are more devices of the NE2000 base.
18395 A present code is difficult for us to support more devices.
18396 To support more NE2000 clone devices, separated the function.
18398 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
18399 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18401 commit 395bce4f59a507a60a475f7ee46bed47de9482df
18402 Author: Mike Frysinger <vapier@gentoo.org>
18403 Date: Sun Feb 24 23:58:13 2008 -0500
18405 net/Blackfin: move on-chip MAC driver into drivers/net/
18407 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
18408 directory, but it is not board specific, so relocate it to the drivers dir
18409 so that other Blackfin ports can utilize it.
18411 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18413 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
18414 Author: Mike Frysinger <vapier@gentoo.org>
18415 Date: Sun Feb 24 23:52:35 2008 -0500
18417 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
18419 Since the "ssync" instruction may have hardware anomalies associated with
18420 it, have the smc91111 driver use the SSYNC macro rather than invoking it
18421 directly. We workaround all the anomalies via this macro.
18423 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18425 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
18426 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18427 Date: Sun Feb 17 22:57:47 2008 +0000
18429 8xx: Update OF support on 8xx
18431 This patch does some shifting around of OF support on 8xx.
18433 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18435 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
18436 Author: Kumar Gala <galak@kernel.crashing.org>
18437 Date: Fri Feb 15 15:16:18 2008 -0600
18439 ppc: Allow boards to specify how much memory they can map
18441 For historical reasons we limited the stack to 256M because some boards
18442 could only map that much via BATS. However newer boards are capable of
18443 mapping more memory (for example 85xx is capble of doing up to 2G).
18445 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18447 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
18448 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18449 Date: Fri Feb 15 01:05:58 2008 +0000
18451 8xx : Add OF support to Adder875 board port - resubmit
18453 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18455 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
18456 Author: Kumar Gala <galak@kernel.crashing.org>
18457 Date: Thu Feb 14 20:44:42 2008 -0600
18459 Add setexpr command
18461 Add a simple expr style command that will set an env variable as the result
18462 of the command. This allows us to do simple math in shell. The following
18463 operations are supported: &, |, ^, +, -, *, /.
18465 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18467 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
18468 Author: Jon Loeliger <jdl@freescale.com>
18469 Date: Wed Mar 5 17:27:48 2008 -0600
18471 FSL: Move board/mpc7448hpc2 under board/freescale
18473 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18475 commit 449c703374a8868453425e15da7e2f76221b72e4
18476 Author: Jon Loeliger <jdl@freescale.com>
18477 Date: Wed Mar 5 17:21:43 2008 -0600
18479 FSL: Move board/mpc8266ads under board/freescale
18481 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18483 commit 5863577989ad689427bb750107e9a75f1c1645d2
18484 Author: Jon Loeliger <jdl@freescale.com>
18485 Date: Wed Mar 5 16:41:41 2008 -0600
18487 FSL: Move board/mpc8260ads under board/freescale
18489 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18491 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
18492 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18493 Date: Tue Mar 25 21:30:08 2008 +0900
18495 [MIPS] Move gth2_config from ARM section to MIPS
18497 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18499 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
18500 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18501 Date: Tue Mar 25 21:30:07 2008 +0900
18503 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
18505 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18507 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
18508 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18509 Date: Tue Mar 25 21:30:07 2008 +0900
18511 [MIPS] Fix dcache_status()
18513 You can't judge UNCACHED by Config.K0 LSB.
18515 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18517 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
18518 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18519 Date: Tue Mar 25 21:30:07 2008 +0900
18521 [MIPS] Introduce _machine_restart
18523 Handles machine specific functions by using weak functions.
18525 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18527 commit decaba6f5cf386d569ac3997bebb871b966c6b18
18528 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18529 Date: Tue Mar 25 21:30:07 2008 +0900
18531 [MIPS] Cleanup CP0 Status initialization
18533 Add setup_c0_status from Linux. For the moment we disable interrupts, set
18534 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
18535 reset-time configuration and will work well across most processors.
18537 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18539 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
18540 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18541 Date: Tue Mar 25 21:30:07 2008 +0900
18543 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
18545 Without this change, we'll be suffering from deffered WATCH exception
18546 once Status.EXL is cleared. Make sure Cause.WP is cleared.
18548 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18550 commit 26138623230ca2bad3c78e05a65527ea70c8b688
18551 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18552 Date: Tue Mar 25 21:30:07 2008 +0900
18554 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
18556 Move things to appropriate place.
18558 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18560 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
18561 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18562 Date: Tue Mar 25 21:30:06 2008 +0900
18564 [MIPS] Implement flush_cache()
18566 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
18567 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
18568 function is used not only in U-Boot specfic programs but also at loading
18571 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18573 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
18574 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18575 Date: Tue Mar 25 21:30:06 2008 +0900
18577 [MIPS] Fix I-/D-cache initialization loops
18579 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
18580 again per a loop for I-cache initialization. But according to 'See MIPS
18581 Run', we're encouraged to use three separate loops rather than combining
18582 them *for both I- and D-cache*. This patch tries to fix this.
18584 In accordance with fixing above, mips_init_[id]cache are separated from
18585 mips_cache_reset(), and rewrite cache loops are completely rewritten with
18588 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18590 commit 1898840797c7f50799377bd5b285a8a93a82c419
18591 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18592 Date: Tue Mar 25 21:30:06 2008 +0900
18594 [MIPS] Replace memory clearance code with f_fill64
18596 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
18598 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18600 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
18601 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18602 Date: Tue Mar 25 21:30:06 2008 +0900
18604 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
18606 This patch replaces the current function definitions with NESTED, LEAF
18607 and END macro. They specify some more additional information about the
18608 function; an alignment of symbol, type of symbol, stack frame usage, etc.
18609 These information explicitly tells the assembler and the debugger about
18610 the types of code we want to generate.
18612 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18614 commit 282223a607c611425fa33f5428f8eae6636972bb
18615 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18616 Date: Tue Mar 25 11:43:17 2008 +0900
18618 [MIPS] asm headers' updates
18620 Make some asm headers adjusted to the latest Linux kernel.
18622 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18624 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
18625 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18626 Date: Tue Mar 25 11:39:29 2008 +0900
18628 [MIPS] Request for the 'mips_cache_lock()' removal
18630 The initial intension of having mips_cache_lock() was to use the cache
18631 as memory for temporary stack use so that a C environment can be set up
18632 as early as possible.
18634 But now mips_cache_lock() follow lowlevel_init(). We've already have the
18635 real memory initilaized at this point, therefore we could/should use it.
18636 No reason to lock at all.
18640 Cache locking is not consistent across MIPS implementaions. Some imple-
18641 mentations don't support locking at all. The style of locking varies -
18642 some support per line locking, others per way, etc. Some parts use bits
18643 in status registers instead of cache ops. Current mips_cache_lock() is
18644 not necessarily general-purpose.
18646 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
18647 they are never get unlocked, so the code relies on whatever gets loaded
18648 after U-Boot to re-initialize the cache and clear the locks. We're sup-
18649 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
18650 but leave the situation as it is for a long time.
18652 For these reasons, I proposed the removal of mips_cache_lock() from the
18653 global start-up code.
18655 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
18656 *things have changed*. If he wants the same behavior as before, he needs
18657 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
18659 If we don't have any regression report through several releases, then
18660 we'll remove codes entirely.
18662 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18663 Acked-by: Andrew Dyer <amdyer@gmail.com>
18665 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
18666 Author: Yuri Tikhonov <yur@emcraft.com>
18667 Date: Mon Mar 24 11:30:54 2008 +0100
18669 lwmon5 SYSMON POST: fix backlight control
18671 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
18672 run on the board, then the SYSMON POST controls the display backlight
18673 (doesn't switch backlight ON if POST FAILED, and does switch the
18674 backlight ON if PASSED).
18676 If not, then the video driver controls the display backlight (just
18677 switch ON the backlight upon initialization).
18679 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18681 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
18682 Author: Yuri Tikhonov <yur@emcraft.com>
18683 Date: Mon Mar 24 11:29:14 2008 +0100
18685 lwmon5 SYSMON POST: fix handling of negative temperatures
18687 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
18689 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18691 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
18692 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18693 Date: Fri Mar 7 16:04:25 2008 +0900
18695 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
18697 In current source code, when the device number of PCI is 0, process PCI
18698 bridge without fail. However, when the device number is 0, it is not PCI
18699 always bridge. There are times when device of PCI allocates.
18701 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
18704 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18705 Acked-by: Stefan Roese <sr@denx.de>
18707 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
18708 Author: Yuri Tikhonov <yur@emcraft.com>
18709 Date: Fri Mar 21 09:18:40 2008 +0100
18711 LWMON5: fix dsPIC POST
18713 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
18715 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
18717 commit 388b82fddc7c05596f3f615f190da0448227dc82
18718 Author: Bartlomiej Sieka <tur@semihalf.com>
18719 Date: Thu Mar 20 23:23:13 2008 +0100
18721 [new uImage] Enable new uImage support for the pcs440ep board.
18723 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18725 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
18726 Author: Bartlomiej Sieka <tur@semihalf.com>
18727 Date: Thu Mar 20 23:23:13 2008 +0100
18729 [new uImage] Do not compile new uImage format support by default
18731 Disable default building of new uImage format support in preparation
18732 for merge with the master. Support for new format can be enabled on
18733 a per-board basis, by defining the following in the board's config file:
18735 #define CONFIG_FIT 1
18736 #define CONFIG_OF_LIBFDT 1
18738 This can be optionally defined to give more verbose output:
18740 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
18742 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18744 commit dafaede8a46c7159310239e036c93e31c6374487
18745 Author: Bartlomiej Sieka <tur@semihalf.com>
18746 Date: Thu Mar 20 23:20:31 2008 +0100
18748 [new uImage] Disable debuging output in preparation for merge with master
18750 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18752 commit fbe7a155027beacebaee9b32e1ada781fe924bca
18753 Author: Bartlomiej Sieka <tur@semihalf.com>
18754 Date: Thu Mar 20 19:38:45 2008 +0100
18756 [new uImage] Compilation and new uImage handling fixes for imxtract
18758 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
18759 include/config_cmd_default.h. Fix few warnings and handling of new format
18762 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18764 commit 36cc8cbb3379d5166f882641123521735c469f92
18765 Author: Bartlomiej Sieka <tur@semihalf.com>
18766 Date: Thu Mar 20 23:10:19 2008 +0100
18768 [new uImage] Fix autoscr command used with new uImage format
18770 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18772 commit 43142e817f0597be412e7cbe19413f5532eafa5d
18773 Author: Bartlomiej Sieka <tur@semihalf.com>
18774 Date: Thu Mar 20 23:10:19 2008 +0100
18776 [new uImage] Fix *.its files location in documentation
18778 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18780 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
18781 Author: Wolfgang Denk <wd@denx.de>
18782 Date: Thu Mar 20 22:01:38 2008 +0100
18784 lwmon5 POST: remove unreachable code
18786 plus some coding style cleanup
18788 Signed-off-by: Wolfgang Denk <wd@denx.de>
18790 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
18791 Author: Yuri Tikhonov <yur@emcraft.com>
18792 Date: Thu Mar 20 17:56:04 2008 +0300
18794 LWMON5: POST RTC fix
18796 Modify the RTC API to provide one a status for the time reported by
18797 the rtc_get() function:
18798 0 - a reliable time is guaranteed,
18799 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
18802 The RTC chip drivers are responsible for providing this info if the
18803 corresponding chip supports such functionality. If not - always
18804 report that the time is reliable.
18806 The POST RTC test was modified to detect the RTC faults utilizing
18807 this new rtc_get() feature.
18809 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18811 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
18812 Author: Martin Krause <martin.krause@tqs.de>
18813 Date: Wed Mar 19 14:25:14 2008 +0100
18815 TQM5200B: update MTD partition layout
18817 - insert partition for dtb blob to TQM5200B MTD layout
18818 - set env variables dependent on the configured board
18819 (TQM5200 or TQM5200B)
18821 Signed-off-by: Martin Krause <martin.krause@tqs.de>
18823 commit f0105727d132f56a21fa3ed8b162309cca6cac44
18824 Author: Stefan Roese <sr@denx.de>
18825 Date: Wed Mar 19 07:09:26 2008 +0100
18827 CFI: Small cleanup for FLASH_SHOW_PROGRESS
18829 With this patch we don't need that many #ifdef's in the code. It moves
18830 the subtraction into the macro and defines a NOP-macro when
18831 CONFIG_FLASH_SHOW_PROGRESS is not defined.
18833 Signed-off-by: Stefan Roese <sr@denx.de>
18834 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
18836 commit 9a042e9ca512beaaa2cb450274313fc477141241
18837 Author: Jerry Van Baren <gvb.uboot@gmail.com>
18838 Date: Sat Mar 8 13:48:01 2008 -0500
18840 Flash programming progress countdown.
18842 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18844 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
18845 Author: Bartlomiej Sieka <tur@semihalf.com>
18846 Date: Wed Mar 19 10:00:06 2008 +0100
18848 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
18850 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18852 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
18853 Author: David Gibson <david@gibson.dropbear.id.au>
18854 Date: Mon Feb 18 18:09:04 2008 +1100
18856 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
18858 Since fdt_node_offset_by_compatible() was converted to the new
18859 fdt_next_node() iterator, a chunk of initialization code became
18860 redundant, but was not removed by oversight. This patch cleans it up.
18862 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18864 commit d0ccb9b140b472039732de102fc14597eedb14df
18865 Author: David Gibson <david@gibson.dropbear.id.au>
18866 Date: Mon Feb 18 18:06:31 2008 +1100
18868 libfdt: Trivial cleanup for CHECK_HEADER)
18870 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
18871 However, there are a handful of functions (fdt_move, rw_check_header,
18872 fdt_open_into) from other files which could also use it (currently
18873 they open-code something more-or-less identical). Therefore, this
18874 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
18877 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18879 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
18880 Author: Kumar Gala <galak@kernel.crashing.org>
18881 Date: Wed Feb 20 14:32:36 2008 -0600
18883 Fix fdt boardsetup command parsing
18885 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
18887 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18889 commit 804887e6001e2f00bea11431bf34d6d472512cda
18890 Author: Kumar Gala <galak@kernel.crashing.org>
18891 Date: Fri Feb 15 03:34:36 2008 -0600
18893 Add sub-commands to fdt
18895 fdt header - Display header info
18896 fdt bootcpu <id> - Set boot cpuid
18897 fdt memory <addr> <size> - Add/Update memory node
18898 fdt rsvmem print - Show current mem reserves
18899 fdt rsvmem add <addr> <size> - Add a mem reserve
18900 fdt rsvmem delete <index> - Delete a mem reserves
18902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18904 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
18905 Author: David Gibson <david@gibson.dropbear.id.au>
18906 Date: Thu Feb 14 16:50:34 2008 +1100
18908 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
18910 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
18911 node which has NOP tags interspersed with its properties. In this
18912 case fdt_add_subnode_namelen() will put the new subnode before the
18913 first NOP tag, even if there are properties after it, which will
18914 result in an invalid blob.
18916 This patch fixes the bug, and adds a testcase for it.
18918 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18920 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
18921 Author: David Gibson <david@gibson.dropbear.id.au>
18922 Date: Tue Feb 12 11:58:31 2008 +1100
18924 libfdt: Add and use a node iteration helper function.
18926 This patch adds an fdt_next_node() function which can be used to
18927 iterate through nodes of the tree while keeping track of depth. This
18928 function is used to simplify the iteration code in a lot of other
18929 functions, and is also exported for use by library users.
18931 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18933 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
18934 Author: David Gibson <david@gibson.dropbear.id.au>
18935 Date: Fri Jan 11 14:55:05 2008 +1100
18937 libfdt: Add fdt_set_name() function
18939 This patch adds an fdt_set_name() function to libfdt, mirroring
18940 fdt_get_name(). This is a r/w function which alters the name of a
18941 given device tree node.
18943 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18945 commit 23e20aa6488e6c0622496549861bfdc74108debe
18946 Author: Yuri Tikhonov <yur@pollux.denx.de>
18947 Date: Tue Mar 18 13:33:30 2008 +0100
18949 lwmon5: Fix register test logic to match the specific GDC h/w.
18951 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18952 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18954 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
18955 Author: Yuri Tikhonov <yur@pollux.denx.de>
18956 Date: Tue Mar 18 13:27:57 2008 +0100
18958 Fix backlight in the lwmon5 POST.
18960 Backlight was switched on even when temperature was too low.
18962 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18963 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18965 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
18966 Author: Yuri Tikhonov <yur@pollux.denx.de>
18967 Date: Wed Feb 6 18:48:36 2008 +0100
18969 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
18971 To enable this, alternative, configuration the U-Boot board configuration
18972 file for lwmon5 includes the definitions of alternative addresses for header
18973 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
18975 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
18976 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
18977 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
18979 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18981 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
18982 Author: Yuri Tikhonov <yur@pollux.denx.de>
18983 Date: Mon Feb 4 17:11:53 2008 +0100
18985 Add support for the lwmon5 board reset via GPIO58.
18987 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18988 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18990 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
18991 Author: Yuri Tikhonov <yur@pollux.denx.de>
18992 Date: Mon Feb 4 17:09:55 2008 +0100
18994 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
18996 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18997 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18999 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
19000 Author: Yuri Tikhonov <yur@pollux.denx.de>
19001 Date: Mon Feb 4 14:11:03 2008 +0100
19003 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
19005 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19006 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19008 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
19009 Author: Yuri Tikhonov <yur@pollux.denx.de>
19010 Date: Mon Feb 4 14:10:42 2008 +0100
19012 The patch adds new POST tests for the Lwmon5 board. These are:
19014 * External Watchdog test;
19020 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19021 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19023 commit c2ed33efbfff5767bca236828e021c55fd547b6c
19024 Author: Yuri Tikhonov <yur@pollux.denx.de>
19025 Date: Mon Feb 4 14:10:01 2008 +0100
19027 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
19029 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19031 commit 3a5d1e7f1309998791702b2a559e3126781746b9
19032 Author: Yuri Tikhonov <yur@pollux.denx.de>
19033 Date: Tue Mar 18 13:33:30 2008 +0100
19035 lwmon5: Fix register test logic to match the specific GDC h/w.
19037 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19038 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19040 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
19041 Author: Yuri Tikhonov <yur@pollux.denx.de>
19042 Date: Tue Mar 18 13:27:57 2008 +0100
19044 Fix backlight in the lwmon5 POST.
19046 Backlight was switcehd on even when temperature was too low.
19048 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19049 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19051 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
19052 Author: Yuri Tikhonov <yur@pollux.denx.de>
19053 Date: Wed Feb 6 18:48:36 2008 +0100
19055 The patch introduces the alternative configuration of the log buffer for
19056 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
19057 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
19058 PPC440EPX_GPT0_COMP5).
19060 To enable this, alternative, configuration the U-Boot board configuration
19061 file for lwmon5 includes the definitions of alternative addresses for header
19062 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
19064 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
19065 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
19066 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
19068 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19070 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
19071 Author: Yuri Tikhonov <yur@pollux.denx.de>
19072 Date: Mon Feb 4 17:11:53 2008 +0100
19074 Add support for the lwmon5 board reset via GPIO58.
19076 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19077 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19079 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
19080 Author: Yuri Tikhonov <yur@pollux.denx.de>
19081 Date: Mon Feb 4 17:09:55 2008 +0100
19083 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
19084 Disable external watch-dog for now.
19086 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19087 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19089 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
19090 Author: Yuri Tikhonov <yur@pollux.denx.de>
19091 Date: Mon Feb 4 14:11:03 2008 +0100
19093 The patch introduces the CRITICAL feature of POST tests. If the test
19094 marked as POST_CRITICAL fails then the alternative, post_critical,
19095 boot-command is used. If this command is not defined then U-Boot
19096 enters into interactive mode.
19098 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19099 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19101 commit 65b20dcefc89618193fa51947968dada91e4c778
19102 Author: Yuri Tikhonov <yur@pollux.denx.de>
19103 Date: Mon Feb 4 14:10:42 2008 +0100
19105 The patch adds new POST tests for the Lwmon5 board.
19108 * External Watchdog test;
19114 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19115 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19117 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
19118 Author: Yuri Tikhonov <yur@pollux.denx.de>
19119 Date: Mon Feb 4 14:10:01 2008 +0100
19121 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
19123 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
19125 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
19126 Author: Wolfgang Denk <wd@denx.de>
19127 Date: Tue Mar 18 17:35:51 2008 +0100
19129 HMI1001: fix compile problem.
19131 Signed-off-by: Wolfgang Denk <wd@denx.de>
19133 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
19134 Author: Mike Frysinger <vapier@gentoo.org>
19135 Date: Mon Feb 18 05:32:30 2008 -0500
19137 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
19139 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
19140 for the board specific driver at all. Just use the common CFI driver.
19142 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19144 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
19145 Author: Mike Frysinger <vapier@gentoo.org>
19146 Date: Tue Feb 19 00:36:14 2008 -0500
19148 Blackfin: add proper ELF markings to some assembly functions
19150 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19152 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
19153 Author: Mike Frysinger <vapier@gentoo.org>
19154 Date: Tue Feb 19 00:35:17 2008 -0500
19156 Blackfin: new cplbinfo command for viewing cplb tables
19158 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19160 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
19161 Author: Mike Frysinger <vapier@gentoo.org>
19162 Date: Mon Feb 18 05:37:51 2008 -0500
19164 Blackfin: update MAINTAINERS list
19166 Add maintainer information for the Blackfin boards.
19168 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19170 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
19171 Author: Mike Frysinger <vapier@gentoo.org>
19172 Date: Mon Feb 18 05:26:48 2008 -0500
19174 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
19176 Stop tying things to the processor that should be tied to other defines and
19177 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
19178 system to select the -mcpu option.
19180 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19182 commit 86a20fb920bd198105acf7b1191117f566d637ed
19183 Author: Mike Frysinger <vapier@gentoo.org>
19184 Date: Sat Feb 16 07:40:36 2008 -0500
19186 Blackfin: move bootldr command to common code
19188 This moves the Blackfin-common bootldr command out of the BF537-STAMP
19189 specific board directory and into the common directory so that all Blackfin
19190 boards may utilize it.
19192 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19194 commit decbe029b2a9d3333d02c433389b1c821eea96d7
19195 Author: Heiko Schocher <hs@denx.de>
19196 Date: Fri Mar 14 11:05:20 2008 +0100
19198 mgcoge: update configuration
19200 Fix configuration for mgcoge board
19202 Signed-off-by: Heiko Schocher <hs@denx.de>
19204 commit c136724cda0219c49f1d4b346f00da29b14fdf14
19205 Author: Wolfgang Denk <wd@denx.de>
19206 Date: Sun Mar 16 01:22:59 2008 +0100
19208 drivers/rtc/Makefile: keep list sorted
19210 Signed-off-by: Wolfgang Denk <wd@denx.de>
19212 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
19213 Author: Tor Krill <tor@excito.com>
19214 Date: Sat Mar 15 15:40:26 2008 +0100
19216 Add support for Intersil isl1208 RTC
19218 Signed-off-by: Tor Krill <tor@excito.com>
19220 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
19221 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19222 Date: Sat Mar 15 17:36:41 2008 +0100
19226 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19228 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
19229 Author: Wolfgang Denk <wd@denx.de>
19230 Date: Sun Mar 16 01:12:58 2008 +0100
19232 Conding style cleanup
19234 Signed-off-by: Wolfgang Denk <wd@denx.de>
19236 commit 41712b4e8c95dff23354bcd620e1f9477160c190
19237 Author: Stefan Roese <sr@denx.de>
19238 Date: Wed Mar 5 12:31:53 2008 +0100
19240 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
19242 This patch adds USB OHCI support to the Canyonlands board port. It also
19243 enables EXT2 support.
19245 Signed-off-by: Stefan Roese <sr@denx.de>
19247 commit 2596f5b9d353ff3e4387a3325d05740f16958038
19248 Author: Stefan Roese <sr@denx.de>
19249 Date: Wed Mar 5 12:29:32 2008 +0100
19251 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
19253 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
19254 way a board just needs to define this new option to enable the "force
19255 NoPowerSwitching mode" instead of adding new CPU/architecture defines
19256 to the USB source itself.
19258 This new option will be used first with the new AMCC 460EX Canyonlands
19259 board port, which will be posted in a few days.
19261 This patch also fixes a small compilation problem when DEBUG is enabled.
19263 Signed-off-by: Stefan Roese <sr@denx.de>
19265 commit 71665ebf88408ff2acb762af47989fd4365b321a
19266 Author: Stefan Roese <sr@denx.de>
19267 Date: Mon Mar 3 17:27:02 2008 +0100
19269 ppc4xx: Add Canyonlands NAND booting support
19271 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
19272 NAND devices. The only bootstrap option for NAND booting is option F for
19273 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
19274 EEPROM needs to be programmed accordingly.
19276 This patch adds basic NAND booting support for the AMCC Canyonlands aval
19277 board and also adds support to the "bootstrap" command, to enable NAND
19278 booting I2C setting.
19280 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
19282 Signed-off-by: Stefan Roese <sr@denx.de>
19284 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
19285 Author: Stefan Roese <sr@denx.de>
19286 Date: Tue Mar 11 16:53:00 2008 +0100
19288 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
19290 This patch adds support for the AMCC Canyonlands 460EX evaluation
19293 Signed-off-by: Stefan Roese <sr@denx.de>
19295 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
19296 Author: Stefan Roese <sr@denx.de>
19297 Date: Tue Mar 11 16:52:24 2008 +0100
19299 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
19301 This patch adds support for the AMCC Canyonlands 460EX evaluation
19304 Signed-off-by: Stefan Roese <sr@denx.de>
19306 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
19307 Author: Stefan Roese <sr@denx.de>
19308 Date: Tue Mar 11 16:51:17 2008 +0100
19310 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
19312 This patch adds support for the AMCC Canyonlands 460EX evaluation
19315 Signed-off-by: Stefan Roese <sr@denx.de>
19317 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
19318 Author: Stefan Roese <sr@denx.de>
19319 Date: Tue Mar 11 15:11:43 2008 +0100
19321 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
19323 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19325 Signed-off-by: Stefan Roese <sr@denx.de>
19327 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
19328 Author: Stefan Roese <sr@denx.de>
19329 Date: Tue Mar 11 15:11:18 2008 +0100
19331 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
19333 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19335 Signed-off-by: Stefan Roese <sr@denx.de>
19337 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
19338 Author: Stefan Roese <sr@denx.de>
19339 Date: Tue Mar 11 15:07:10 2008 +0100
19341 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
19343 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19345 Signed-off-by: Stefan Roese <sr@denx.de>
19347 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
19348 Author: Stefan Roese <sr@denx.de>
19349 Date: Tue Mar 11 15:05:50 2008 +0100
19351 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
19353 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19355 Signed-off-by: Stefan Roese <sr@denx.de>
19357 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
19358 Author: Stefan Roese <sr@denx.de>
19359 Date: Tue Mar 11 15:05:26 2008 +0100
19361 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
19363 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19365 Signed-off-by: Stefan Roese <sr@denx.de>
19367 commit 56e410178375d9f20be25fb24e180974f0ae120b
19368 Author: Stefan Roese <sr@denx.de>
19369 Date: Tue Feb 19 22:07:57 2008 +0100
19371 ppc4xx: interrupt.c reworked
19373 This patch is a rework of the 4xx interrupt handling done while
19374 adding the 460EX/GT support. Interrupts are needed on 4xx for the
19377 Signed-off-by: Stefan Roese <sr@denx.de>
19379 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
19380 Author: Stefan Roese <sr@denx.de>
19381 Date: Tue Feb 19 22:01:57 2008 +0100
19383 ppc4xx: program_tlb now uses 64bit physical addess
19385 This patch changes the physical addess parameter from 32bit to 64bit.
19386 This is needed for 36bit 4xx platforms to access areas located
19387 beyond the 4GB border, like SoC peripherals (EBC etc.).
19389 Signed-off-by: Stefan Roese <sr@denx.de>
19391 commit c3307fa186af85771924c434997089b8104c0a46
19392 Author: Stefan Roese <sr@denx.de>
19393 Date: Tue Feb 19 21:58:25 2008 +0100
19395 ppc4xx: miiphy.c reworked
19397 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
19398 badly neede some cleanup.
19400 Signed-off-by: Stefan Roese <sr@denx.de>
19402 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
19403 Author: Stefan Roese <sr@denx.de>
19404 Date: Tue Feb 19 16:21:49 2008 +0100
19406 rtc: Add M41T62 support
19408 This patch add support for the STM M41T62 RTC. It is used and tested
19409 on the AMCC Canyonlands 406EX platform.
19411 Signed-off-by: Stefan Roese <sr@denx.de>
19413 commit 217d383e201adc7f2271145ae345ea5eae2b7170
19414 Author: Niklaus Giger <niklaus.giger@netstal.com>
19415 Date: Mon Feb 25 18:46:43 2008 +0100
19417 ppc4xx: Add 405GPr based MCU25 board specific files
19419 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19421 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
19422 Author: Niklaus Giger <niklaus.giger@netstal.com>
19423 Date: Mon Feb 25 18:46:42 2008 +0100
19425 ppc4xx: Add 405GPr based MCU25 board config file
19427 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19429 commit b05f35436b733a240559e77e46bed8439665ecc5
19430 Author: Niklaus Giger <niklaus.giger@netstal.com>
19431 Date: Mon Feb 25 18:46:41 2008 +0100
19433 ppc4xx: Add 405GPr based MCU25 board. Global files
19435 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19437 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
19438 Author: Niklaus Giger <niklaus.giger@netstal.com>
19439 Date: Mon Feb 25 18:37:02 2008 +0100
19441 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
19443 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19445 commit a079494853cc2bfeddb26673219db0b4b2b31566
19446 Author: Niklaus Giger <niklaus.giger@netstal.com>
19447 Date: Mon Feb 25 18:37:01 2008 +0100
19449 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
19451 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
19452 the FLASH_CFI_LEGACY et al. config options.
19454 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19456 commit e4170e5a50c8110f792bc37472833ae669d69951
19457 Author: Stefan Roese <sr@denx.de>
19458 Date: Tue Mar 11 13:52:25 2008 +0100
19460 ppc4xx: Fix comment in 405EX DDR2 init code
19462 Signed-off-by: Stefan Roese <sr@denx.de>
19464 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
19465 Author: Bartlomiej Sieka <tur@semihalf.com>
19466 Date: Fri Mar 14 16:22:34 2008 +0100
19468 Add MD5 support to the new uImage format
19470 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19472 commit 0ede0c383530a418cf98be9122371a86573cd0db
19473 Author: Bartlomiej Sieka <tur@semihalf.com>
19474 Date: Fri Mar 14 16:22:34 2008 +0100
19476 Add the MD5 algorithm
19478 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
19479 calculated using the md5() function -- see include/md5.h for details.
19481 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19483 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
19484 Author: Wolfgang Denk <wd@denx.de>
19485 Date: Fri Mar 14 16:04:54 2008 +0100
19487 tools/setlocalversion: use a git-describe-ish format
19489 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
19490 where 'nnnnn' is the number of commits since the last tag (i.e.,
19491 1.3.2-rc3). This makes it much easier to recognize "newer" versions
19492 and to see how much has been changed since the referenced tag.
19494 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
19496 Signed-off-by: Wolfgang Denk <wd@denx.de>
19498 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
19499 Author: Wolfgang Denk <wd@denx.de>
19500 Date: Thu Mar 13 14:32:03 2008 +0100
19502 HMI1001: add support for MPC5200 Rev. B processors.
19504 Signed-off-by: Wolfgang Denk <wd@denx.de>
19506 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
19507 Author: Wolfgang Denk <wd@denx.de>
19508 Date: Thu Mar 13 14:29:49 2008 +0100
19510 TQM5200: remove dead code
19512 This board never used a MGT5100 processor.
19514 Signed-off-by: Wolfgang Denk <wd@denx.de>
19516 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
19517 Author: Marian Balakowicz <m8@semihalf.com>
19518 Date: Wed Mar 12 12:14:15 2008 +0100
19520 [new uImage] Fix build issue on ARM
19522 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
19524 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19526 commit 3310c549a73a949430bfda90876df7552a1dab0c
19527 Author: Marian Balakowicz <m8@semihalf.com>
19528 Date: Wed Mar 12 12:13:13 2008 +0100
19530 [new uImage] Add new uImage format documentation and examples
19532 Create doc/uImage.FIT documentation directory with the following files:
19533 - command_syntax_extensions.txt : extended command syntax description
19534 - howto.txt : short usage howto
19535 - source_file_format.txt : internal new uImage format description
19537 Add example image source files:
19542 Update README appropriately.
19544 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19545 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19547 commit 1ec73761d2e247078f4520a265d463e8b73391a2
19548 Author: Marian Balakowicz <m8@semihalf.com>
19549 Date: Wed Mar 12 10:35:52 2008 +0100
19551 [new uImage] Fix definition of common bootm_headers_t fields
19553 verify, autostart and lmb fields are used regardless of CONFIG_FIT
19554 setting, move their definitions to common section.
19556 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19558 commit 1d1cb4270edc6a99276834064069717f9782c491
19559 Author: Marian Balakowicz <m8@semihalf.com>
19560 Date: Wed Mar 12 10:35:51 2008 +0100
19562 [new uImage] Fix build problems on trab board
19564 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19566 commit f773bea8e11f4a11c388dcee956b2444203e6b65
19567 Author: Marian Balakowicz <m8@semihalf.com>
19568 Date: Wed Mar 12 10:35:46 2008 +0100
19570 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
19572 Save FIT configuration provied in the first bootm argument and use it
19573 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
19574 arguments are not specified.
19576 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19578 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
19579 Author: Marian Balakowicz <m8@semihalf.com>
19580 Date: Wed Mar 12 10:33:01 2008 +0100
19582 [new uImage] More verbose kernel image uncompress error message
19584 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19586 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
19587 Author: Marian Balakowicz <m8@semihalf.com>
19588 Date: Wed Mar 12 10:33:01 2008 +0100
19590 [new uImage] Use show_boot_progress() for new uImage format
19592 This patch allocates a set of show_boot_progress() IDs for new uImage format
19593 and adds show_boot_progress() calls in new uImage format handling code.
19595 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19597 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
19598 Author: Marian Balakowicz <m8@semihalf.com>
19599 Date: Wed Mar 12 10:33:01 2008 +0100
19601 [new uImage] Add new uImage fromat support to fpga command
19603 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19605 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
19606 Author: Marian Balakowicz <m8@semihalf.com>
19607 Date: Wed Mar 12 10:33:01 2008 +0100
19609 [new uImage] Add new uImage format handling to other bootm related commands
19613 docboot - cmd_doc.c
19614 fdcboot - cmd_fdc.c
19615 diskboot - cmd_ide.c
19617 scsiboot - cmd_scsi.c
19618 usbboot - cmd_usb.c
19620 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19622 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
19623 Author: Marian Balakowicz <m8@semihalf.com>
19624 Date: Wed Mar 12 10:33:00 2008 +0100
19626 [new uImage] Add new uImage format support to imgextract command
19628 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19630 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
19631 Author: Marian Balakowicz <m8@semihalf.com>
19632 Date: Wed Mar 12 10:33:00 2008 +0100
19634 [new uImage] Add new uImage format support to autoscript routine
19636 autoscript() routine is updated to accept second argument, which
19637 is only used for FIT images and provides a FIT subimage unit name.
19639 autoscript() routine callers must now pass two arguments. For
19640 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
19641 variable 'autoscript_uname' is introduced and used as a FIT
19642 subimage unit name source.
19644 autoscript command accepts extended syntax of the addr argument:
19645 addr:<subimg_uname>
19647 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19649 commit cd7c596e9f561dbbc17b717277438aee78cde14f
19650 Author: Marian Balakowicz <m8@semihalf.com>
19651 Date: Wed Mar 12 10:33:00 2008 +0100
19653 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
19655 This patch updates architecture specific implementations of
19656 do_bootm_linux() adding new uImage format handling for
19657 operations like get kernel entry point address, get kernel
19658 image data start address.
19660 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19662 commit 3dfe110149311425919e6d6a14b561b4207498f1
19663 Author: Marian Balakowicz <m8@semihalf.com>
19664 Date: Wed Mar 12 10:32:59 2008 +0100
19666 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
19668 This patch adds new node offset fields to struct bootm_headers
19669 and updates bootm_headers processing code to make use of them.
19670 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
19672 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19674 commit bc8ed486b125452ba3bd8344f052f437329150c5
19675 Author: Marian Balakowicz <m8@semihalf.com>
19676 Date: Wed Mar 12 10:32:53 2008 +0100
19678 [new uImage] ppc: Add new uImage format support to FDT handling routines
19680 Support for new (FIT) format uImages is added to powerpc specific
19681 boot_get_fdt() routine which now recognizes, sanity checks FIT image
19682 and is able to access data sections of the requested component image.
19684 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19686 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
19687 Author: Marian Balakowicz <m8@semihalf.com>
19688 Date: Wed Mar 12 10:14:57 2008 +0100
19690 [new uImage] Re-enable interrupts for non automatic booting
19692 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
19693 environment variable is not set to 'yes'.
19695 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19697 commit d985c8498c4e47095820da97aa722381d39172c5
19698 Author: Marian Balakowicz <m8@semihalf.com>
19699 Date: Wed Mar 12 10:14:38 2008 +0100
19701 [new uImage] Remove unnecessary arguments passed to ramdisk routines
19703 boot_get_ramdisk() and image_get_ramdisk() do not need all
19704 cmdtp, flag, argc and argv arguments. Simplify routines definition.
19706 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19708 commit c87796483bc7c2900470dc747c367f602577608d
19709 Author: Marian Balakowicz <m8@semihalf.com>
19710 Date: Wed Mar 12 10:12:37 2008 +0100
19712 [new uImage] Add new uImage format support for ramdisk handling
19714 This patch updates boot_get_ramdisk() routine adding format
19715 verification and handling for new (FIT) uImages.
19717 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19719 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
19720 Author: Marian Balakowicz <m8@semihalf.com>
19721 Date: Wed Mar 12 10:01:05 2008 +0100
19723 [new uImage] Add new uImage format support for kernel booting
19725 New format uImages are recognized by the bootm command,
19726 validity of specified kernel component image is checked and
19727 its data section located and used for further processing
19728 (uncompress, load, etc.)
19730 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19732 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
19733 Author: Marian Balakowicz <m8@semihalf.com>
19734 Date: Tue Mar 11 12:35:20 2008 +0100
19736 [new uImage] Add new uImage format support for imls and iminfo commands
19738 imls and iminfo can now recognize nad print out contents of the new (FIT)
19741 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19743 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
19744 Author: Bartlomiej Sieka <tur@semihalf.com>
19745 Date: Tue Mar 11 12:34:47 2008 +0100
19747 [new uImage] Add support for new uImage format to mkimage tool
19749 Support for the new uImage format (FIT) is added to mkimage tool.
19750 Commandline syntax is appropriately extended:
19752 mkimage [-D dtc_options] -f fit-image.its fit-image
19754 mkimage (together with dtc) takes fit-image.its and referenced therein
19755 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
19756 final image that can be transferred to the target (e.g., via tftp) and then
19757 booted using the bootm command in U-Boot.
19759 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19761 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
19762 Author: Marian Balakowicz <m8@semihalf.com>
19763 Date: Mon Mar 10 17:53:49 2008 +0100
19765 [new uImage] Make node unit names const in struct bootm_headers
19767 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19769 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
19770 Author: Marian Balakowicz <m8@semihalf.com>
19771 Date: Fri Feb 29 21:24:06 2008 +0100
19773 [new uImage] New uImage low-level API
19775 Add FDT-based functions for handling new format component images,
19776 configurations, node operations, property get/set, etc.
19778 fit_ - routines handling global new format uImage operations
19779 like get/set top level property, process all nodes, etc.
19780 fit_image_ - routines handling component images subnodes
19781 fit_conf_ - routines handling configurations node
19783 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19784 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19786 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
19787 Author: Wolfgang Denk <wd@denx.de>
19788 Date: Sun Mar 9 16:20:02 2008 +0100
19792 Update CHANGELOG for release.
19794 Signed-off-by: Wolfgang Denk <wd@denx.de>
19796 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
19797 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19798 Date: Sun Mar 9 14:52:11 2008 +0100
19800 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
19802 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19803 Signed-off-by: Wolfgang Denk <wd@denx.de>
19805 commit db695b78515ddb88a2d4f3357c120345efbf59ec
19806 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19807 Date: Sun Mar 9 10:44:01 2008 +0100
19809 scb9328: Fix flash warning: type qualifiers ignored on function return type
19811 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19813 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
19814 Author: Wolfgang Denk <wd@denx.de>
19815 Date: Sun Mar 9 10:50:41 2008 +0100
19817 esd/common/fpga.c: fix indentation.
19819 Signed-off-by: Wolfgang Denk <wd@denx.de>
19821 commit cc3843e36453e2b8db65d7e56de938ba045016a0
19822 Author: Wolfgang Denk <wd@denx.de>
19823 Date: Sun Mar 9 10:33:31 2008 +0100
19825 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
19827 and get rid of a couple of unneeded casts.
19829 Signed-off-by: Wolfgang Denk <wd@denx.de>
19831 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
19832 Author: Wolfgang Denk <wd@denx.de>
19833 Date: Sun Mar 9 10:09:53 2008 +0100
19835 esd/common/fpga.c: fix 'assignment of read-only location' error
19837 Signed-off-by: Wolfgang Denk <wd@denx.de>
19839 commit c6fe4dabac066e8758345d249032768496983a3e
19840 Author: Wolfgang Denk <wd@denx.de>
19841 Date: Sun Mar 9 02:13:19 2008 +0100
19843 Makefile: make build silently again.
19845 Signed-off-by: Wolfgang Denk <wd@denx.de>
19847 commit 76babc86576f092573599334c85ec543fdbc6015
19848 Author: Wolfgang Denk <wd@denx.de>
19849 Date: Sun Mar 9 02:07:49 2008 +0100
19851 m501sk: Fix out of tree building
19853 Signed-off-by: Wolfgang Denk <wd@denx.de>
19855 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
19856 Author: Wolfgang Denk <wd@denx.de>
19857 Date: Sun Mar 9 00:06:09 2008 +0100
19859 ADS5121: fix out of tree build
19861 and simplify Makefile a bit.
19863 Signed-off-by: Wolfgang Denk <wd@denx.de>
19865 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
19866 Author: Wolfgang Denk <wd@denx.de>
19867 Date: Sat Mar 8 22:35:31 2008 +0100
19871 Signed-off-by: Wolfgang Denk <wd@denx.de>
19873 commit 78a90f827df74520e939c794fc7413dace21c4db
19874 Author: Wolfgang Denk <wd@denx.de>
19875 Date: Sat Mar 8 22:35:04 2008 +0100
19879 Signed-off-by: Wolfgang Denk <wd@denx.de>
19881 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
19882 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19883 Date: Sat Mar 8 21:30:04 2008 +0100
19885 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
19887 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19889 commit d75469d48c05795144f4b8ba76addbb4920a7bba
19890 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19891 Date: Sat Mar 8 09:25:49 2008 +0900
19893 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
19895 When rtl_recv() of rtl8169 is called, OWNbit of status register
19896 is not enable occasionally.
19897 rtl_recv() doesn't work normally when the driver doesn't do
19898 appropriate processing.
19899 This patch fix this problem.
19901 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19903 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
19904 Author: Heiko Schocher <hs@denx.de>
19905 Date: Fri Mar 7 08:15:28 2008 +0100
19907 mgsuvd: update board configuration
19909 initialize the UPIOx controller.
19911 Signed-off-by: Heiko Schocher <hs@denx.de>
19913 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
19914 Author: Heiko Schocher <hs@denx.de>
19915 Date: Fri Mar 7 08:13:41 2008 +0100
19917 mgcoge: update board configuration
19919 add support for the config Flash.
19920 initialize the UPIOx controller.
19922 Signed-off-by: Heiko Schocher <hs@denx.de>
19924 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
19925 Author: Kim Phillips <kim.phillips@freescale.com>
19926 Date: Fri Mar 7 12:27:31 2008 -0600
19928 mpc83xx: make dtb basename file references equal those of linux
19930 the dts file basenames were updated in linux - this helps avoid
19931 inadvertently loading any old dtbs laying around.
19933 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19935 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
19936 Author: Kim Phillips <kim.phillips@freescale.com>
19937 Date: Wed Feb 27 16:08:22 2008 -0600
19939 net: uec_phy: actually increment the timeout counter
19941 allow u-boot to recover (and, e.g., switch to another interface) in the
19942 case where a PHY does not report autonegotiation is complete within its
19943 two second timeout value.
19945 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19947 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
19948 Author: Markus Brunner <super.firetwister@googlemail.com>
19949 Date: Wed Mar 5 21:38:12 2008 +0100
19951 fix taihu soft spi_read
19953 The taihu board used gpio_read_out_bit which reads the output register and not
19956 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
19958 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
19959 Author: Stefan Roese <sr@denx.de>
19960 Date: Fri Mar 7 08:01:43 2008 +0100
19962 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
19964 Signed-off-by: Stefan Roese <sr@denx.de>
19966 commit bd4458cb47abecabd406b1210457be96c69fc49d
19967 Author: Dave Liu <r63238@freescale.com>
19968 Date: Tue Mar 4 16:59:22 2008 +0800
19970 837xEMDS: Improve the system performance
19972 1. Make the CSB bus pipeline depth as 4, and enable
19974 2. Raise the eTSEC emergency priority;
19975 3. Use the highest IP blocks clock.
19977 Signed-off-by: Dave Liu <daveliu@freescale.com>
19979 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
19980 Author: Detlev Zundel <dzu@denx.de>
19981 Date: Thu Mar 6 16:45:53 2008 +0100
19983 Replace "run load; run update" with conditionalized "run load update".
19985 The latter version stops when "run load" fails for whatever reasons
19986 rendering the combination *a lot* more secure.
19988 Signed-off-by: Detlev Zundel <dzu@denx.de>
19990 commit 6bc113886d7d316df1a4e459bec8baf027518551
19991 Author: Stefan Roese <sr@denx.de>
19992 Date: Tue Mar 4 17:40:41 2008 +0100
19994 net: Print error message upon net usage when no ethernet-interface is found
19996 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
19997 defined. Then no ethernet interface is available but a simple "tftp"
19998 command will return without any error message which is quite confusing.
20000 Signed-off-by: Stefan Roese <sr@denx.de>
20002 commit a30a549a3553032d809e0356306b62de0b125901
20003 Author: Jon Loeliger <jdl@freescale.com>
20004 Date: Tue Mar 4 10:03:03 2008 -0600
20006 Remove erroneous or extra spd.h #includers.
20008 Many of the spd.h #includers don't need it,
20009 and wanted to have spd_sdram() declared instead.
20010 Since they didn't get that, some also had open
20011 coded extern declarations of it instead or as well.
20012 Fix it all up by using spd_sdram.h where needed.
20014 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20016 commit a4475386cef14af3fd88f0518b688e755669486d
20017 Author: Wolfgang Denk <wd@denx.de>
20018 Date: Tue Mar 4 17:41:28 2008 +0100
20020 PCS440EP: fix build problems (redundant #define)
20022 Signed-off-by: Wolfgang Denk <wd@denx.de>
20024 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
20025 Author: Stefan Roese <sr@denx.de>
20026 Date: Tue Mar 4 17:39:25 2008 +0100
20028 net: Print error message upon net usage when no ethernet-interface is found
20030 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
20031 defined. Then no ethernet interface is available but a simple "tftp"
20032 command will return without any error message which is quite confusing.
20034 Signed-off-by: Stefan Roese <sr@denx.de>
20036 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
20037 Author: Wolfgang Denk <wd@denx.de>
20038 Date: Tue Mar 4 17:38:50 2008 +0100
20040 W7OLMC/W7OLMG: fix build problems (redundant #define)
20042 Signed-off-by: Wolfgang Denk <wd@denx.de>
20044 commit f9301e1cda296245ba052d7b08321199c3d0af9d
20045 Author: Wolfgang Denk <wd@denx.de>
20046 Date: Tue Mar 4 14:58:31 2008 +0100
20048 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
20050 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
20051 problem for out-of-tree builds which caused "make clean" to fail.
20053 Signed-off-by: Wolfgang Denk <wd@denx.de>
20055 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
20056 Author: Wolfgang Denk <wd@denx.de>
20057 Date: Tue Mar 4 11:58:26 2008 +0100
20059 examples/Makefile: build "hello_world" on 8xx, too.
20061 Signed-off-by: Wolfgang Denk <wd@denx.de>
20063 commit 74eb0222594fd23aafdf168e60e872814eea8b62
20064 Author: Mike Nuss <mike@terascala.com>
20065 Date: Mon Mar 3 15:27:05 2008 -0500
20067 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
20069 Every now and then a Sequoia board (or equivalent hardware) had
20070 problems connecting to a Gigabit capable network interface.
20072 There were differences in the PHY setup between Linux and U-Boot.
20074 This patch fixes the problem. Apparently "remote fault" is being set,
20075 which signals to some devices (on the other end of the cable) that a
20076 fault has occurred, while other devices ignore it. I believe the RF bit
20077 was causing the issue, but I removed T4 also, to match up with Linux.
20079 Signed-off-by: Mike Nuss <mike@terascala.com>
20081 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
20082 Author: Timur Tabi <timur@freescale.com>
20083 Date: Mon Mar 3 09:58:52 2008 -0600
20085 fix QE firmware uploading limit
20087 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
20088 systems with more than one RISC core.
20090 Signed-off-by: Timur Tabi <timur@freescale.com>
20092 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
20093 Author: Bernhard Nemec <bnemec@ganssloser.com>
20094 Date: Mon Mar 3 11:57:23 2008 +0000
20096 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
20098 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
20099 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
20101 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
20103 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
20104 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
20105 Date: Mon Mar 3 10:39:13 2008 +0200
20107 fix copy from ram to dataflash
20109 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
20110 routines instead of dataflash. This is because it checks "if source
20111 address is not dataflash" instead of target address.
20113 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
20115 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
20116 Author: Wolfgang Denk <wd@denx.de>
20117 Date: Mon Mar 3 12:16:44 2008 +0100
20119 Fix quoting problem (preboot setting) in many board config files.
20121 Signed-off-by: Wolfgang Denk <wd@denx.de>
20123 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
20124 Author: Wolfgang Denk <wd@denx.de>
20125 Date: Mon Mar 3 12:36:49 2008 +0100
20127 ADS5121: Fix default environment.
20129 Signed-off-by: Wolfgang Denk <wd@denx.de>
20131 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
20132 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20133 Date: Sun Mar 2 16:12:31 2008 +0100
20135 Makefile: Fix missing unconfig and mkconfig use
20137 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20139 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
20140 Author: michael <trimarchi@gandalf.sssup.it>
20141 Date: Sun Mar 2 23:33:46 2008 +0100
20143 Fix checking fat32 cluster size.
20145 This fixes the cluster size tests in the FAT32 file system.
20146 The current implementation of VFAT support doesn't work if the
20147 referred cluster has an offset > 16bit representation, causing
20148 "fatload" and "fatls" commands etc. to fail.
20150 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
20152 commit 661bad63a076a96c39c64f136915f146725af92b
20153 Author: Wolfgang Denk <wd@denx.de>
20154 Date: Sun Mar 2 22:57:23 2008 +0100
20156 Prepare v1.3.2-rc2 release candidate
20158 Signed-off-by: Wolfgang Denk <wd@denx.de>
20160 commit 76957cb3d621bf664311908e5962e151c633c285
20161 Author: Stefan Roese <sr@denx.de>
20162 Date: Sat Mar 1 12:11:40 2008 +0100
20164 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
20166 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
20167 currently 4k/2k is configured. This patch fixes this issue.
20169 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
20171 Signed-off-by: Stefan Roese <sr@denx.de>
20173 commit 118978c8eb43803e2794233922df4249fa278b83
20174 Author: Woodruff, Richard <r-woodruff2@ti.com>
20175 Date: Fri Feb 29 17:34:35 2008 -0600
20177 Fix alignment error on ARM for modules
20179 Fix alignment fault on ARM when running modules. With out an explicit
20180 linker file gcc4.2.1 will half word align __bss_start's value. The word
20181 dereference will crash hello_world.
20183 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
20185 commit ce1120dd703e6f12c59e4eba9962356a0300b832
20186 Author: Dave Liu <r63238@freescale.com>
20187 Date: Fri Feb 29 17:45:31 2008 +0800
20189 fs: Fix ext2 read issue
20191 The ext2 aligned process will corrupt the key
20192 data struct, the patch fix this.
20194 Signed-off-by: Dave Liu <daveliu@freescale.com>
20196 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
20197 Author: Wolfgang Denk <wd@denx.de>
20198 Date: Sun Mar 2 22:45:33 2008 +0100
20200 Makefile: cleanup "clean" target
20202 Make sure CDPATH settings cannot interfere.
20205 Signed-off-by: Wolfgang Denk <wd@denx.de>
20207 commit ffda586fc1373243c9794babde69500f6293a8d8
20208 Author: Li Yang <leoli@freescale.com>
20209 Date: Fri Feb 29 11:46:05 2008 +0800
20211 add cscope build target
20213 Add cscope build target to generate cscope database for code browsing.
20215 Signed-off-by: Li Yang <leoli@freescale.com>
20217 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
20218 Author: Kim Phillips <kim.phillips@freescale.com>
20219 Date: Wed Feb 27 15:06:39 2008 -0600
20221 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
20223 erratum 5.6 states the autoneg completion bit is functional only if the
20224 autoneg bit is asserted.
20226 This fixes any secondarily-issued networking commands on non-gigabit
20227 links on the mpc8360 mds board.
20229 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20231 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
20232 Author: John Rigby <jrigby@freescale.com>
20233 Date: Tue Feb 26 09:38:14 2008 -0700
20235 MPC5121e ADS PCI support take 3
20237 Adds PCI support for MPC5121
20239 Tested with drivers/net/rtl8139.c
20241 Support is conditional since PCI on old silicon does not work.
20243 ads5121_PCI_config turns on PCI
20245 In this version, condition compilation of PCI code has been moved
20246 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
20247 suggested by Jean-Christophe PLAGNIOL-VILLARD
20249 Signed-off-by: John Rigby <jrigby@freescale.com>
20251 commit 44b4dbed4133f657705b7c5193209da9978243a7
20252 Author: Anatolij Gustschin <agust@denx.de>
20253 Date: Mon Feb 25 23:53:07 2008 +0100
20255 Fix warnings while compilation of post/drivers/memory.c
20257 Fix warnings while compilation with new gcc in eldk-4.2
20259 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20261 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
20262 Author: Anatolij Gustschin <agust@denx.de>
20263 Date: Mon Feb 25 20:54:04 2008 +0100
20265 ppc4xx: Fix problem in 4xx_enet.c driver
20267 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
20268 enabled. To reproduce the problem ensure that 'ethrotate'
20269 environment variable isn't set to "no" and then run
20270 "tftp 200000 not_existent_file".
20271 This patch tries to fix the issue.
20273 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20275 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
20276 Author: Anatolij Gustschin <agust@denx.de>
20277 Date: Mon Feb 25 20:04:20 2008 +0100
20279 POST: Disable cache while SPR POST
20281 Currently (since commit b2e2142c) u-boot crashes on
20282 sequoia board while SPR test if CONFIG_4xx_DCACHE is
20283 enabled. This patch disables the cache while SPR test.
20285 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20287 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
20288 Author: Martin Krause <martin.krause@tqs.de>
20289 Date: Mon Feb 25 17:52:40 2008 +0100
20291 TQM5200: use automatic fdt memory fixup (part 2)
20293 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
20294 TB5200 and TB5200_B to fixup the /memory node with the memory values
20295 detected by U-Boot.
20297 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20299 commit 44ceec253ea941b301abf4b079d52324def69d92
20300 Author: Martin Krause <martin.krause@tqs.de>
20301 Date: Mon Feb 25 15:17:05 2008 +0100
20303 TQM5200: use automatic fdt memory fixup
20305 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
20306 TB5200 and TB5200_B to fixup the /memory node with the memory values
20307 detected by U-Boot.
20309 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20311 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
20312 Author: Martin Krause <martin.krause@tqs.de>
20313 Date: Mon Feb 25 13:27:52 2008 +0100
20315 TQM5200: fix bug in SDRAM initialization code
20317 This patch fixes a bug in the SDRAM initialization code for the
20318 TQM5200. The hi_addr bit is now set correctly. Without this patch
20319 the hi_addr bit is always set to 1, if the second SDRAM bank is
20322 For other MPC5200 boards a correspondig patch has already been applied
20323 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
20325 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20327 Forget the first patch please. I confused flash with SDRAM in
20330 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
20331 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20332 Date: Mon Feb 25 00:03:12 2008 +0100
20334 mx1fs2/flash: Fix multiple compiler warnings
20336 "pointer targets in assignment differ in signedness"
20338 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20340 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
20341 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20342 Date: Mon Feb 25 00:03:11 2008 +0100
20344 arm-imx: Fix register definitions
20346 Sync register definitions with linux
20348 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20350 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
20351 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20352 Date: Mon Feb 25 00:03:10 2008 +0100
20354 actua1/actua2/actua3: Fix multiple unused variable warnings
20357 actux1.c: In function 'checkboard':
20358 actux1.c:92: warning: unused variable 'revision'
20361 actux2.c: In function 'checkboard':
20362 actux2.c:100: warning: unused variable 's'
20363 actux2.c:99: warning: unused variable 'revision'
20364 actux2.c: In function 'reset_phy':
20365 actux2.c:130: warning: unused variable 'i'
20368 actux3.c: In function 'checkboard':
20369 actux3.c:114: warning: unused variable 'revision'
20371 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20373 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
20374 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20375 Date: Sun Feb 24 11:44:29 2008 +0900
20377 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
20379 The previous patch was lacking of i386, microblaze, nios and nios2. This
20380 patch tries to fix them.
20382 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20384 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
20385 Author: Marian Balakowicz <m8@semihalf.com>
20386 Date: Fri Feb 29 22:22:46 2008 +0100
20388 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
20390 Do not use global fdt blob pointer, calculate blob size from routine
20391 argument blob pointer.
20393 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20395 commit d1cc52879c8966507dad9fb575481e6d3985e64e
20396 Author: David Gibson <david@gibson.dropbear.id.au>
20397 Date: Tue Feb 12 00:58:31 2008 +1100
20399 libfdt: Add and use a node iteration helper function.
20401 This patch adds an fdt_next_node() function which can be used to
20402 iterate through nodes of the tree while keeping track of depth. This
20403 function is used to simplify the iteration code in a lot of other
20404 functions, and is also exported for use by library users.
20406 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20408 commit 8cf30809a82902a471866d2f07725ce3b8a22291
20409 Author: Bartlomiej Sieka <tur@semihalf.com>
20410 Date: Fri Feb 29 16:00:24 2008 +0100
20412 [new uImage] Add libfdt support to mkimage
20414 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20416 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
20417 Author: Bartlomiej Sieka <tur@semihalf.com>
20418 Date: Fri Feb 29 16:00:23 2008 +0100
20420 [new uImage] Add sha1.o object to mkimage binary build
20422 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20424 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
20425 Author: Marian Balakowicz <m8@semihalf.com>
20426 Date: Fri Feb 29 16:00:06 2008 +0100
20428 [new uImage] Fix component handling for legacy multi component images
20430 Use uint32_t when accessing size table in image_multi_count() and
20431 image_multi_getimg() for multi component images.
20433 Add missing uimage_to_cpu() endianness conversion.
20435 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20437 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
20438 Author: Marian Balakowicz <m8@semihalf.com>
20439 Date: Fri Feb 29 15:59:59 2008 +0100
20441 [new uImage] Share common uImage code between mkimage and U-boot
20443 This patch adds the following common routines:
20445 1) Dedicated mkimage print_header() is replaced with common
20446 image_print_contents()
20447 image_print_contents_noindent()
20449 2) Common os/arch/type/comp fields name <--> id translation routines
20450 genimg_get_os_name()
20451 genimg_get_arch_name()
20452 genimg_get_type_name()
20453 genimg_get_comp_name()
20455 genimg_get_arch_id()
20456 genimg_get_type_id()
20457 genimg_get_comp_id()
20459 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20461 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
20462 Author: Marian Balakowicz <m8@semihalf.com>
20463 Date: Fri Feb 29 14:58:34 2008 +0100
20465 [new uImage] Update naming convention for bootm/uImage related code
20467 This patch introduces the following prefix convention for the
20468 image format handling and bootm related code:
20470 genimg_ - dual format shared code
20471 image_ - legacy uImage format specific code
20472 fit_ - new uImage format specific code
20473 boot_ - booting process related code
20475 Related routines are renamed and a few pieces of code are moved around and
20478 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20480 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
20481 Author: Kumar Gala <galak@kernel.crashing.org>
20482 Date: Wed Feb 27 21:51:51 2008 -0600
20484 [new uImage] Respect autostart setting in linux bootm
20486 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20487 Acked-by: Marian Balakowicz <m8@semihalf.com>
20489 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
20490 Author: Kumar Gala <galak@kernel.crashing.org>
20491 Date: Wed Feb 27 21:51:50 2008 -0600
20493 [new uImage] Provide ability to restrict region used for boot images
20495 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
20496 to restrict what memory range is used for bootm.
20498 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20499 Acked-by: Marian Balakowicz <m8@semihalf.com>
20501 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
20502 Author: Kumar Gala <galak@kernel.crashing.org>
20503 Date: Wed Feb 27 21:51:49 2008 -0600
20505 [new uImage] Use lmb for bootm allocations
20507 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
20508 functions over to using lmb for allocation of the ramdisk, command line
20509 and kernel bd info.
20511 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
20514 Provided a weak function that board code can call to do additional
20515 lmb reserves if needed.
20517 Also introduce the concept of bootmap_base to specify the offset in
20518 physical memory that the bootmap is located at. This is used for
20519 allocations of the cmdline, kernel bd, and device tree as they should
20520 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
20522 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20524 commit f5614e7926863bf0225ec860d9b319741a9c4004
20525 Author: Kumar Gala <galak@kernel.crashing.org>
20526 Date: Wed Feb 27 21:51:48 2008 -0600
20528 [new uImage] Add autostart flag to bootm_headers structure
20530 The autostart env variable was dropped as part of the initial new uImage
20531 cleanup. Add it back here so the arch specific code can decide if it
20532 wants to really boot or not.
20534 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20535 Acked-by: Marian Balakowicz <m8@semihalf.com>
20537 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
20538 Author: Kumar Gala <galak@kernel.crashing.org>
20539 Date: Wed Feb 27 21:51:47 2008 -0600
20541 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
20543 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
20544 the memory spaces used by various boot images and structures. This code
20545 will allow us to simplify the code in bootm and its support functions.
20547 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20549 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
20550 Author: Kumar Gala <galak@kernel.crashing.org>
20551 Date: Tue Feb 19 22:03:47 2008 -0600
20553 [new uImage] ppc: Allow boards to specify effective amount of memory
20555 For historical reasons we limited the stack to 256M because some boards
20556 could only map that much via BATS. However newer boards are capable of
20557 mapping more memory (for example 85xx is capable of doing up to 2G).
20559 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20560 Acked-by: Marian Balakowicz <m8@semihalf.com>
20562 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
20563 Author: Kumar Gala <galak@kernel.crashing.org>
20564 Date: Wed Feb 27 21:51:46 2008 -0600
20566 [new uImage] rework error handling so common functions don't reset
20568 Changed image_get_ramdisk() to just return NULL on error and have
20569 get_ramdisk() propogate that error to the caller. It's left to the
20570 caller to call do_reset() if it wants to.
20572 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
20573 to a common location. In the future we will change get_fdt() and
20574 fdt_relocate() to return success/failure and not call do_reset() at all.
20576 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20577 Acked-by: Marian Balakowicz <m8@semihalf.com>
20579 commit d2bc095a639672def11d5d043b5688d0dbd692ec
20580 Author: Kumar Gala <galak@kernel.crashing.org>
20581 Date: Wed Feb 27 21:51:45 2008 -0600
20583 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
20585 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
20586 however it does mean we have to go in and fixup the initrd info since
20587 we don't know where it will be.
20589 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20591 commit 27953493ef025fb698d68c5dee39b36f01f4d530
20592 Author: Kumar Gala <galak@kernel.crashing.org>
20593 Date: Wed Feb 27 21:51:44 2008 -0600
20595 [new uImage] ppc: Determine if we are booting an OF style
20597 If we are bootin OF style than we can skip setting up some things
20598 that are used for the old boot method.
20600 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20601 Acked-by: Marian Balakowicz <m8@semihalf.com>
20603 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
20604 Author: Kumar Gala <galak@kernel.crashing.org>
20605 Date: Wed Feb 27 21:51:43 2008 -0600
20607 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
20609 We don't actually need the kdb param as we are just using it to get
20610 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
20611 boot via OF we might not actually fill out a kdb.
20613 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20614 Acked-by: Marian Balakowicz <m8@semihalf.com>
20616 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
20617 Author: Kumar Gala <galak@kernel.crashing.org>
20618 Date: Wed Feb 27 16:30:47 2008 -0600
20620 85xx: Don't icbi when unlocking the cache
20622 There is no reason to icbi when invalidating the temporary stack in
20623 the d-cache. Its impossible on e500 to have the i-cache contain
20624 any addresses in the temp stack and it can be problematic in generating
20625 transactions on the bus to non-valid addresses.
20627 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20629 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
20630 Author: Andy Fleming <afleming@freescale.com>
20631 Date: Wed Feb 27 15:50:50 2008 -0600
20633 Fix source for ECM error IVPR
20635 The source vector for the ECM was being set to 2,
20636 but that's what the source vector for DDR was being
20637 set to. Change it to 1.
20639 Signed-off-by: Andy Fleming <afleming@freescale.com>
20641 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
20642 Author: Andy Fleming <afleming@freescale.com>
20643 Date: Wed Feb 27 14:29:58 2008 -0600
20645 Invalidate INIT_RAM TLB mappings
20647 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
20648 mappings to be unguarded. This collided with an existing "bug"
20649 where the mappings for the INIT_RAM were being kept around.
20650 This meant that speculative loads to those addresses were
20651 succeeding in the TLB, and going out to the bus, where they
20652 were causing an exception (there's nothing at that address). The
20653 Flash code was coincidentally causing such a speculative load.
20654 Rather than go back to mapping the INIT RAM as guarded, we fix
20655 it so that the entries for the INIT_RAM are invalidated. Thus
20656 the speculative loads will fail in the TLB, and have no effect.
20658 Signed-off-by: Andy Fleming <afleming@freescale.com>
20660 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
20661 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20662 Date: Sun Feb 17 22:56:17 2008 +0100
20664 sbc8548: Fix Revision reading and unused variable 'path'
20666 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20668 commit 495d162374c472f46454453553382ad0735dc725
20669 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20670 Date: Sun Feb 17 22:56:16 2008 +0100
20672 sbc8548: Fix cfi flash bank declaration
20674 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20676 commit 4efbe9dbb129f857f27856936112c8c02f016be6
20677 Author: Marian Balakowicz <m8@semihalf.com>
20678 Date: Wed Feb 27 11:02:26 2008 +0100
20680 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
20682 Dual format image code must properly handle all three FDT passing methods:
20683 - raw FDT blob passed
20684 - FDT blob embedded in the legacy uImage
20685 - FDT blob embedded in the new uImage
20687 This patch enables proper raw FDT handling when no FIT imaeg support
20688 is compiled in. This is a bit tricky as we must dected FIT format even
20689 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
20690 blobs use tha same low level format (libfdt).
20692 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20694 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
20695 Author: Marian Balakowicz <m8@semihalf.com>
20696 Date: Wed Feb 27 11:02:26 2008 +0100
20698 [new uImage] POWERPC: Add image_get_fdt() routine
20700 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
20701 (3) or embedded in the new uImage. For the (2) case embedding image must be
20702 verified before we get FDT from it. This patch factors out legacy image
20703 specific verification routine to the separate helper routine.
20705 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20706 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20708 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
20709 Author: Marian Balakowicz <m8@semihalf.com>
20710 Date: Wed Feb 27 11:02:07 2008 +0100
20712 [new uImage] Add image_get_kernel() routine
20714 Legacy image specific verification is factored out to a separate helper
20715 routine to keep get_kernel() generic and simple.
20717 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20718 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20720 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
20721 Author: Marian Balakowicz <m8@semihalf.com>
20722 Date: Wed Feb 27 11:01:04 2008 +0100
20724 [new uImage] Move image verify flag to bootm_headers structure
20726 Do not pass image verification flag directly to related routines.
20727 Simplify argument passing and move it to the bootm_header structure which
20728 contains curently processed image specific data and is already being passed
20729 on the argument list.
20731 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20732 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20734 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
20735 Author: Marian Balakowicz <m8@semihalf.com>
20736 Date: Wed Feb 27 11:00:47 2008 +0100
20738 [Makefile] Sort COBJS in lib_<arch> Makefiles
20740 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20742 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
20743 Author: Marian Balakowicz <m8@semihalf.com>
20744 Date: Wed Feb 27 11:00:47 2008 +0100
20746 [new uImage] Optimize gen_get_image() flow control
20748 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
20749 to do, update its control flow to better reflect that simple case.
20751 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20752 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20754 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
20755 Author: Marian Balakowicz <m8@semihalf.com>
20756 Date: Mon Feb 4 08:28:17 2008 +0100
20758 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
20760 PPC specific FDT blob handling code is divided into two separate routines:
20762 get_fdt() - find and verify a FDT blob (either raw or image embedded)
20763 fdt_relocate() - move FDT blob to within BOOTMAP if needed
20765 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20766 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20768 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
20769 Author: Jon Loeliger <jdl@freescale.com>
20770 Date: Mon Feb 25 13:13:37 2008 -0600
20772 86xx: Fix renamed GUR symbols in sbc8641d board.
20774 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
20775 (86xx: Fix GUR PCI config registers properly), we should have
20776 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
20777 symbols in the sbc8641d board as well. Fix this oversight.
20779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20781 commit 64cd594e623c39f73964d18787763e4533f791f7
20782 Author: Stefan Roese <sr@denx.de>
20783 Date: Mon Feb 25 16:50:48 2008 +0100
20785 ppc4xx: Fix acadia_nand build problem
20787 Don't include testdram() on NAND-booting target acadia_nand. This saves
20788 a few bytes and makes the target build clean again.
20790 Signed-off-by: Stefan Roese <sr@denx.de>
20792 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
20793 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20794 Date: Sun Feb 24 23:03:12 2008 +0000
20796 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
20798 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20800 commit 724902c8464e610642b3a170278b99710325888e
20801 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20802 Date: Sun Feb 24 23:03:11 2008 +0000
20804 arm-imx: Fix registers definition
20806 Sync registers definition with linux
20808 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20810 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
20811 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20812 Date: Sun Feb 24 23:03:10 2008 +0000
20814 actua1/actua2/actua3: Fix multipleunused variable
20817 actux1.c: In function 'checkboard':
20818 actux1.c:92: warning: unused variable 'revision'
20821 actux2.c: In function 'checkboard':
20822 actux2.c:100: warning: unused variable 's'
20823 actux2.c:99: warning: unused variable 'revision'
20824 actux2.c: In function 'reset_phy':
20825 actux2.c:130: warning: unused variable 'i'
20828 actux3.c: In function 'checkboard':
20829 actux3.c:114: warning: unused variable 'revision'
20831 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20833 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
20834 Author: Marian Balakowicz <m8@semihalf.com>
20835 Date: Mon Feb 4 08:28:09 2008 +0100
20837 [new uImage] Add dual format uImage support framework
20839 This patch adds framework for dual format images. Format detection is added
20840 and the bootm controll flow is updated to include cases for new FIT format
20843 When the legacy (image_header based) format is detected appropriate
20844 legacy specific handling is invoked. For the new (FIT based) format uImages
20845 dual boot framework has a minial support, that will only print out a
20846 corresponding debug messages. Implementation of the FIT specific handling will
20847 be added in following patches.
20849 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20851 commit b29661fc1151077776454288051bc9a488351ce8
20852 Author: Wolfgang Denk <wd@denx.de>
20853 Date: Sun Feb 24 15:21:36 2008 +0100
20855 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
20857 Signed-off-by: Wolfgang Denk <wd@denx.de>
20859 commit 00b48a48424894daa589d166d73277830b1c6ac4
20860 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20861 Date: Sat Feb 23 12:15:56 2008 +0100
20863 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
20865 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20867 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
20868 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20869 Date: Sat Feb 23 17:24:16 2008 +0900
20871 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
20873 ----------------------------------------------------------------
20874 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
20876 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
20879 GCC can be made to warn about usage of long long types with ISO C90
20880 (-ansi), but only with -pedantic. You can write this in a way that even
20881 then it doesn't cause warnings, namely by:
20884 __extension__ typedef __signed__ long long __s64;
20885 __extension__ typedef unsigned long long __u64;
20888 The __extension__ keyword in front of this switches off any pedantic
20889 warnings for this expression.
20891 Signed-off-by: Olaf Hering <olh@suse.de>
20892 Cc: <linux-arch@vger.kernel.org>
20893 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
20894 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
20895 ----------------------------------------------------------------
20897 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20899 commit 208acd112e6517b21fc30c420396902b103563ac
20900 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20901 Date: Sat Feb 23 17:07:57 2008 +0900
20903 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
20905 This will reduce the build time.
20907 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20909 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
20910 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20911 Date: Sat Feb 23 17:05:00 2008 +0900
20913 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
20915 This will reduce the build time.
20917 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20919 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
20920 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20921 Date: Sat Feb 23 16:58:41 2008 +0900
20923 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
20925 This reduces the build time by ~10%. Here's the gth2_config example.
20928 real 0m31.441s 0m27.833s
20929 user 0m24.766s 0m23.045s
20930 sys 0m10.425s 0m7.468s
20932 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20934 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
20935 Author: Marcel Moolenaar <marcelm@juniper.net>
20936 Date: Fri Feb 22 10:48:07 2008 -0800
20938 make define2mk.sed work on FreeBSD
20940 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
20941 the define2mk.sed script was identified as the source of the link
20942 failure on FreeBSD. The problem is that sed(1) does not always support
20943 the '+' operator. It isn't on FreeBSD. The attach patch implements the
20944 equivalent, using the '*' operator instead and should work everywhere.
20946 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
20948 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
20949 Author: Detlev Zundel <dzu@denx.de>
20950 Date: Fri Feb 22 17:21:32 2008 +0100
20952 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
20954 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
20955 final traces of long-deprecated "ramdisk" kernel parm") makes these
20956 changes neccessary.
20958 Signed-off-by: Detlev Zundel <dzu@denx.de>
20960 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
20961 Author: Larry Johnson <lrj@acm.org>
20962 Date: Thu Feb 21 13:58:16 2008 -0500
20964 LM75 bug fix for negative temperatures
20966 When the LM75 temperature sensor measures a temperature below 0 C, the
20967 current driver does not perform sign extension, so the result returned is
20968 256 C too high. This patch fixes the problem.
20970 Signed-off-by: Larry Johnson <lrj@acm.org>
20972 commit 5a910c224b13e413bda41922379add6d75c32da3
20973 Author: Heiko Schocher <hs@denx.de>
20974 Date: Thu Feb 21 18:33:45 2008 +0100
20976 IDS8247: update MAINTAINER entry.
20978 Signed-off-by: Heiko Schocher <hs@denx.de>
20980 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
20981 Author: Heiko Schocher <hs@denx.de>
20982 Date: Thu Feb 21 18:31:15 2008 +0100
20984 Fix device tree for mgsuvd board.
20986 Rename the "scc" node in "ethernet" for the mgsuvd board.
20988 Signed-off-by: Heiko Schocher <hs@denx.de>
20990 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
20991 Author: Yuri Tikhonov <yur@emcraft.com>
20992 Date: Thu Feb 21 14:23:42 2008 +0100
20994 lwmon5: enable hardware watchdog
20996 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
20997 causing it to reboot the board if U-Boot does a long busy-wait with
20998 udelay(). Thus, for these boards we have to restart WD more
21001 This patch splits the busy-wait udelay() into smaller, predefined,
21002 intervals, so that the watchdog timer may be resetted with the
21003 configurable (CONFIG_WD_PERIOD) interval.
21005 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
21007 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
21008 Author: Anatolij Gustschin <agust@denx.de>
21009 Date: Thu Feb 21 12:52:29 2008 +0100
21011 ppc4xx: Support for ATI Radeon 9200 card on sequoia
21013 Adds configuration option for ATI Radeon 9200 card
21014 support to sequoia config file. If CONFIG_VIDEO
21015 is enabled, TEXT_BASE should be changed to 0xFFF80000.
21017 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21019 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
21020 Author: Kumar Gala <galak@kernel.crashing.org>
21021 Date: Mon Feb 18 08:18:07 2008 -0600
21023 Remove duplicate defines for ARRAY_SIZE
21025 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
21026 the define in common.h.
21028 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21030 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
21031 Author: Kumar Gala <galak@kernel.crashing.org>
21032 Date: Mon Feb 18 08:09:37 2008 -0600
21034 ppc: Allow boards to specify effective amount of memory
21036 For historical reasons we limited the stack to 256M because some boards
21037 could only map that much via BATS. However newer boards are capable of
21038 mapping more memory (for example 85xx is capable of doing up to 2G).
21040 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21042 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
21043 Author: Mike Frysinger <vapier@gentoo.org>
21044 Date: Mon Feb 18 05:24:13 2008 -0500
21046 include autoconf.mk before any other .mk files
21048 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
21049 those .mk files can have make if statements based on the current config.
21051 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21053 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
21054 Author: Mike Frysinger <vapier@gentoo.org>
21055 Date: Mon Feb 18 05:10:07 2008 -0500
21057 error check autoconf.mk generation
21059 If any of the steps for generating autoconf.mk fail currently, they go
21060 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
21061 This is simpler and more robust than placing '|| exit $$?' after every line.
21063 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21065 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
21066 Author: Stefano Babic <sbabic@denx.de>
21067 Date: Mon Feb 18 08:03:51 2008 +0100
21069 Fix bug in dependency checking
21071 By adding VERSION_FILE to the PHONY targets the script
21072 /tools/setlocalversion is always called and version_autogenerated.h
21073 is replaced only if the script find a modified source file.
21075 Signed-off-by: Stefano Babic <sbabic@denx.de>
21077 commit 98ba144ccc912eee90dd42699f023c497ce774c6
21078 Author: Kyungmin Park <kmpark@infradead.org>
21079 Date: Mon Feb 18 14:35:43 2008 +0900
21081 Fix GPMC CS2 memory setup at apollon
21083 It disables the current map first
21085 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21087 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
21088 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21089 Date: Sun Feb 17 23:52:46 2008 +0100
21091 uli526x: Fix multiple differ in signedness and parentheses around comparison
21093 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21095 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
21096 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21097 Date: Sun Feb 17 16:58:04 2008 +0100
21099 MIPS: Fix CFG_NO_FLASH support
21101 - Fix flash_init call when CFG_NO_FLASH is used
21102 - Remove no more needed flash.c for qemu-mips
21104 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21106 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
21107 Author: Mike Frysinger <vapier@gentoo.org>
21108 Date: Sat Feb 16 02:40:18 2008 -0500
21110 easylogo: clean up some more and add -r (rgb) support
21112 Michael Hennerich added support for outputting an image in RGB format rather
21113 than forcing YUYV all the time. This makes obvious sense if the display you
21114 have takes RGB input rather than YUYV.
21116 Rather than hack in support for options, I've converted it to use getopt and
21117 cleaned up the argument parsing in the process.
21119 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
21120 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21122 commit f65c98129ccada3f7caf97d80395a95b84e911de
21123 Author: Mike Frysinger <vapier@gentoo.org>
21124 Date: Sat Feb 16 02:12:37 2008 -0500
21126 Makefile: add target for $(LDSCRIPT)
21128 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
21129 then change into the board directory and try and create it. This allows you
21130 to generate the linker script on the fly based upon board defines (like the
21131 Blackfin boards do).
21133 There should be no regressions due to this change as the normal case is to
21134 already have a u-boot.lds file. If that's the case, then there's nothing to
21135 generate, and so make will always exit. The fix here is that if the linker
21136 script does not exist, the implicit rules take over and attempt to guess how
21137 to generate the file.
21139 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21141 commit 5583cbf736474ef754e128a54fb78632f57b48fd
21142 Author: Marian Balakowicz <m8@semihalf.com>
21143 Date: Thu Feb 21 17:27:49 2008 +0100
21145 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
21147 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21149 commit 2242f5369822bc7780db95c47985bb408ea9157b
21150 Author: Marian Balakowicz <m8@semihalf.com>
21151 Date: Thu Feb 21 17:27:41 2008 +0100
21153 [new uImage] Rename and move print_image_hdr() routine
21155 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21157 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
21158 Author: Marian Balakowicz <m8@semihalf.com>
21159 Date: Thu Feb 21 17:20:20 2008 +0100
21161 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
21163 Introducing routines for parsing new uImage format bootm arguments:
21164 [<addr>]#<conf> - configuration specification
21165 [<addr>]:<subimg> - subimage specification
21167 New format images can contain multiple subimages of the same type. For example
21168 a single new format image file can contain three kernels, two ramdisks and a
21169 couple of FDT blobs. Subimage and configuration specifications are extensions
21170 to bootm (and other image-related commands) arguments' syntax that allow to
21171 specify which particular subimage should be operated on.
21173 Subimage specification is used to denote a particular subimage. Configurations
21174 are a bit more complex -- they are used to define a particualr booting setup,
21175 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
21178 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21180 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
21181 Author: Marian Balakowicz <m8@semihalf.com>
21182 Date: Thu Feb 21 17:20:19 2008 +0100
21184 [new uImage] Add gen_get_image() routine
21186 This routine assures that image (whether legacy or FIT) is not
21187 in a special dataflash storage.
21189 If image address is a dataflash address image is moved to system RAM.
21191 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21193 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
21194 Author: Marian Balakowicz <m8@semihalf.com>
21195 Date: Thu Feb 21 17:20:18 2008 +0100
21197 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
21199 New uImage format (Flattened Image Tree) requires libfdt
21200 functionality, print out error message if CONFIG_OF_LIBFDT
21203 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
21204 This commit turns it on by default.
21206 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21208 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
21209 Author: Michael Schwingen <michael@schwingen.org>
21210 Date: Mon Feb 18 23:16:35 2008 +0100
21212 CFI: Do not use uninitialized cmd_reset
21214 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
21217 From a short test, it looks like AMD-style flash roms treat *any* unknown
21218 command write as a reset, at least when in CFI Query mode, so issuing the
21219 Intel reset command to AMD-style flashs seems safe (from the small sample I
21220 have), plus the 3-cycle magic sequence should kick the state machine into
21221 the right state even without a reset command. Since the AMD-style flashs
21222 require the unlock sequence for real operation, I chose to try the AMD reset
21223 command first, so that Intel flashs do no see an invalid command prior to
21226 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
21227 plus Intel StrataFlash.
21229 Signed-off-by: Michael Schwingen <michael@schwingen.org>
21230 Signed-off-by: Stefan Roese <sr@denx.de>
21232 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
21233 Author: Rafal Jaworowski <raj@semihalf.com>
21234 Date: Thu Feb 21 11:56:44 2008 +0100
21236 API: Add (c) and licensing notice to the public API header.
21238 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
21240 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
21241 Author: Yuri Tikhonov <yur@emcraft.com>
21242 Date: Thu Feb 21 11:06:07 2008 +0100
21244 Fix CPU POST test failure
21246 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
21247 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
21248 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
21249 This patch just saves the CR value before running the test code, so allowing
21250 it to do anything it wants with CR.
21252 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
21253 Acked-by: Yuri Tikhonov <yur@emcraft.com>
21256 commit d5908b093955415f3d340706378b991f911af671
21257 Author: Jon Loeliger <jdl@freescale.com>
21258 Date: Wed Feb 20 15:26:51 2008 -0600
21260 8610HPCD: Document the flashbank selection switches.
21262 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21264 commit a551cee99ad1d1da20fd23ad265de47448852f56
21265 Author: Jon Loeliger <jdl@freescale.com>
21266 Date: Wed Feb 20 14:22:26 2008 -0600
21268 86xx: Fix GUR PCI config registers properly.
21270 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
21271 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
21272 botched it due to not realizing that 8610 and 8641 had different
21273 Global Utility Register defintions, one of which was like 85xx,
21274 and the other wasn't. Correct this problem by introducing two
21275 symbols, one for each 86xx SoC, but neither of which is named
21276 anything like 85xx.
21278 My bad. Lovely Wednesday with git bisect. You know.
21280 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21282 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
21283 Author: Jon Loeliger <jdl@freescale.com>
21284 Date: Wed Feb 20 12:24:11 2008 -0600
21286 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
21288 Without an actual supported video card hooked up, enabling
21289 the CONFIG_VIDEO by default just makes it look broken by
21290 routing all console output to the video card. Don't.
21292 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21294 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
21295 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
21296 Date: Wed Jan 30 15:08:15 2008 -0600
21298 ColdFire: Fix missing code flash size for M5485EVB
21300 Signed-off-by: James Mahan <kmahan@freescale.com>
21301 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21303 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
21304 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
21305 Date: Wed Jan 30 15:04:42 2008 -0600
21307 ColdFire: Fix 5282 and 5271 interrupt mask bit
21309 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21311 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
21312 Author: Jon Loeliger <jdl@freescale.com>
21313 Date: Tue Feb 19 12:31:08 2008 -0600
21315 8610HPCD: Fix typos in two PCI setup registers.
21317 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
21318 were erroneously present as 85xx names and values, leftover from
21319 the clone wars. Fix this by removing the 85xx cruft from the
21322 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21324 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
21325 Author: Jon Loeliger <jdl@freescale.com>
21326 Date: Mon Feb 18 14:01:56 2008 -0600
21328 86xx: Convert sbc8641d to use libfdt.
21330 This is the proper fix for a missing closing brace in the function
21331 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
21332 The ft_cpu_setup() function in mpc8641hpcn.c should have been
21333 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
21334 but was missed. Only, the sbc8641d was nominally still using it.
21335 It all got ripped out, and the funcality that was in ft_board_setup()
21336 was refactored to remove the CPU portions into the new file
21337 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
21339 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
21341 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21343 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
21344 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21345 Date: Sun Feb 17 23:35:31 2008 +0100
21347 mpc86xx: Fix unused variable 'config' and 'immap'
21349 and remove useless CONFIG_DDR_INTERLEAVE
21351 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21353 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
21354 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21355 Date: Sun Feb 17 23:03:36 2008 +0100
21357 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
21359 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21361 commit b6f29c84c208a091f95a10cbc9852d729659ba20
21362 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21363 Date: Sun Feb 17 14:15:31 2008 +0100
21365 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
21367 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21369 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
21370 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21371 Date: Sun Feb 17 14:15:32 2008 +0100
21373 pxa: fix assignment from incompatible pointer type
21375 fix mmc_bread function prototype
21377 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21379 commit 64d792063fff90b8118179b092feee09fe5cae13
21380 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21381 Date: Sun Feb 17 14:15:30 2008 +0100
21383 at91cap9adk: fix implicit declaration of function 'eth_init'
21385 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21387 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
21388 Author: Wolfgang Denk <wd@denx.de>
21389 Date: Sun Feb 17 15:43:44 2008 +0100
21391 Remove files added by mistake, update CHANGELOG.
21393 Signed-off-by: Wolfgang Denk <wd@denx.de>
21395 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
21396 Author: Mike Nuss <mike@terascala.com>
21397 Date: Wed Feb 6 11:10:11 2008 -0500
21399 PPC440EPx: Optionally enable second I2C bus
21401 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
21402 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
21403 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
21405 Signed-off-by: Mike Nuss <mike@terascala.com>
21406 Cc: Stefan Roese <sr@denx.de>
21408 commit ef5b4f221c22d05770878513951745f236b5b43f
21409 Author: Niklaus Giger <niklaus.giger@netstal.com>
21410 Date: Tue Feb 5 10:26:44 2008 +0100
21412 ppc4xx: HCU4/5. Cleanup configs
21414 - hcu4.h: Removed define of CONFIG_PPC405GPr
21415 - Corrected phy addresses
21416 - Fix boot variables
21417 - Respect line length of 80 chars
21419 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21421 commit 74973126d1be63ac75bdc192f46234dca3a7c421
21422 Author: Niklaus Giger <niklaus.giger@netstal.com>
21423 Date: Tue Feb 5 11:31:28 2008 +0100
21425 ppc4xx: HCU4/5. Cleanups
21427 - Fix some coding style violations.
21428 - Use in/out_u16/32 where appropriate.
21429 - Use register names from ppc405.h.
21430 - Fix trace useage for Lauterbach.
21431 - Remove obsolete generation HCU2.
21432 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
21434 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21436 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
21437 Author: Niklaus Giger <niklaus.giger@netstal.com>
21438 Date: Tue Feb 5 10:26:41 2008 +0100
21440 ppc4xx: PPC405GPr fix missing register definitions
21442 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21444 commit 214398d9cb22268d9d4f7563359edca0f78297a2
21445 Author: Larry Johnson <lrj@acm.org>
21446 Date: Fri Jan 18 21:49:05 2008 -0500
21448 ppc4xx: Beautify configuration files for Sequoia and Korat boards
21450 Signed-off-by: Larry Johnson <lrj@acm.org>
21452 commit 30c6a241e88499f536e86d325759e29ba00ff67f
21453 Author: Anatolij Gustschin <agust@denx.de>
21454 Date: Fri Feb 15 20:09:01 2008 +0100
21456 Wipe out assembler warnings while compiling x86 biosemu
21458 This patch tries to get rid of some assembler warnings about
21459 changed .got2 section type while compiling x86 bios emulator
21462 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21464 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
21465 Author: Wolfgang Denk <wd@denx.de>
21466 Date: Fri Feb 15 00:57:09 2008 +0100
21468 Prepare v1.3.2-rc1 release candidate
21470 commit f33e9653c9c09868995d788511d573771c209fe5
21471 Author: Anatolij Gustschin <agust@denx.de>
21472 Date: Fri Feb 15 00:13:20 2008 +0100
21474 Fix compile warning on lib_ppc/board.c
21476 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21478 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
21479 Author: Anatolij Gustschin <agust@denx.de>
21480 Date: Thu Feb 14 18:22:04 2008 +0100
21482 Add Radeon Mobility 9200 pci device id to the radeon driver
21484 This patch extends PCI device id table of the
21485 radeon driver so that the driver will also support
21486 Radeon Mobility 9200 (M9+) based boards.
21488 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21490 commit 1b8607e1f7143548c6062c28371449ec69588c00
21491 Author: Anatolij Gustschin <agust@denx.de>
21492 Date: Thu Feb 14 18:19:50 2008 +0100
21494 Extend ATI Radeon driver to support more video modes
21496 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
21497 800x600, 640x480 at 24, 16 and 8 bpp.
21499 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21501 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
21502 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21503 Date: Sun Feb 10 17:05:20 2008 +0100
21505 xsengine: fix typo and few coding style
21507 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21509 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
21510 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21511 Date: Fri Feb 8 21:25:58 2008 +0100
21513 Fix wrong memory limit calculation in memory-test
21515 If the length of the memory address range passed to the "mtest" command is
21516 not of the form 2^x - 1, not all address lines are tested. This bug is
21517 inherited from the original software at
21518 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
21521 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21523 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
21524 Author: Wolfgang Denk <wd@denx.de>
21525 Date: Fri Feb 15 00:11:39 2008 +0100
21527 Coding STyle cleanup.
21529 Signed-off-by: Wolfgang Denk <wd@denx.de>
21531 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
21532 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21533 Date: Tue Feb 5 13:30:43 2008 +0900
21535 sh: Fix register address of SH7722
21537 The address of SH7722 is wrong by old document.
21538 This patch fixes this problem.
21540 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21542 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
21543 Author: Mike Frysinger <vapier@gentoo.org>
21544 Date: Mon Feb 4 17:44:23 2008 -0500
21546 only update version header as needed
21548 Constantly rebuilding the version header will force useless relinking, so we
21549 simply need to compare the new header with the existing one before updating
21552 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21554 commit 208447f8e953f347425eb92c8e28d59e6d911363
21555 Author: Mike Frysinger <vapier@gentoo.org>
21556 Date: Mon Jan 28 05:56:19 2008 -0500
21558 Do not specify a CROSS_COMPILE default when executing size
21560 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21562 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
21563 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21564 Date: Wed Feb 13 11:19:19 2008 +0100
21566 Fix return value of mtest when CFG_ALT_MEMTEST set
21568 Fix a missing return statement from a non-void function.
21570 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21572 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
21573 Author: Timur Tabi <timur@freescale.com>
21574 Date: Wed Jan 9 14:35:26 2008 -0600
21576 85xx, 86xx: Determine I2C clock frequencies and store in global_data
21578 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
21580 Update the get_clocks() function in 85xx and 86xx to determine the I2C
21581 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
21583 Signed-off-by: Timur Tabi <timur@freescale.com>
21585 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
21586 Author: Wolfgang Denk <wd@denx.de>
21587 Date: Thu Feb 14 23:18:01 2008 +0100
21589 TQM834x: clean up configuration
21591 Get board name consistent with Linux and elsewhere;
21592 get rid of local network definitions etc.
21594 Signed-off-by: Wolfgang Denk <wd@denx.de>
21596 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
21597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21598 Date: Thu Feb 14 08:02:12 2008 +0100
21600 TFTP: fix search of ':' in BootFile
21602 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21604 commit 0bc9efada170096c6b273f19165e32936d330d80
21605 Author: Wolfgang Denk <wd@denx.de>
21606 Date: Thu Feb 14 22:46:55 2008 +0100
21608 Coding style cleanup; update CHANGELOG.
21610 Signed-off-by: Wolfgang Denk <wd@denx.de>
21612 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
21613 Author: Wolfgang Denk <wd@denx.de>
21614 Date: Thu Feb 14 22:43:22 2008 +0100
21616 PPC: Use r2 instead of r29 as global data pointer
21618 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
21619 will refuse to use load/store multiple insns; instead, it issues a
21620 list of simple load/store instructions upon function entry and exit,
21621 resulting in bigger code size, which in turn makes the build for a
21626 Signed-off-by: Wolfgang Denk <wd@denx.de>
21628 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
21629 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
21630 Date: Wed Jan 30 09:08:49 2008 +0100
21632 ARM: make the machid configurable via the environment
21634 If the variable "machid" exists, let do_bootm_linux use that instead
21635 of bd->bi_arch_number.
21637 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
21639 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
21640 Author: Vlad Lungu <vlad@comsys.ro>
21641 Date: Wed Jan 23 16:34:46 2008 +0200
21643 Use #ifdef CONFIG_FSLDMAFEC
21645 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
21648 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
21650 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
21651 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
21652 Date: Sat Jan 19 10:25:59 2008 +0900
21654 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
21656 Current MII_DEBUG is confusing in two ways. One is useless define-then-
21657 undef at the top of the file. The other is there is only one debug() in
21658 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
21659 While there are many useful printf()/puts() debug codes, but they are for
21660 DEBUG, not for MII_DEBUG.
21662 This patch tries to put them all together into MII_DEBUG and debug().
21664 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
21666 commit 751b9b5189f3274b03c809172631316d6b002c82
21667 Author: Kyungmin Park <kmpark@infradead.org>
21668 Date: Thu Jan 17 16:43:25 2008 +0900
21670 OneNAND Initial Program Loader (IPL) support
21672 This patch enables the OneNAND boot within U-Boot.
21673 Before this work, we used another OneNAND IPL called X-Loader based
21674 on open source. With this work, we can build the oneboot.bin image
21675 without other program.
21677 The build sequence is simple.
21678 First, it compiles the u-boot.bin
21679 Second, it compiles OneNAND IPL
21680 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
21681 The mechanism is similar with NAND boot except it boots from itself.
21683 Another thing is that you can only use the OneNAND IPL only to work
21684 other bootloader such as RedBoot and so on.
21686 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21688 commit 21f6f9636f0e978397548751347425fbf8d42bb3
21689 Author: Andy Fleming <afleming@freescale.com>
21690 Date: Wed Jan 16 13:06:59 2008 -0600
21692 Fix CONFIG_MMC usage in fat code
21694 A #if statement in fat.c depended on CONFIG_MMC, instead of
21695 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
21696 as "1" rather than just defined. Now it's better.
21698 Signed-off-by: Andy Fleming <afleming@freescale.com>
21700 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
21701 Author: Rafal Jaworowski <raj@semihalf.com>
21702 Date: Tue Jan 15 12:52:31 2008 +0100
21704 ppc: Refactor cache routines, so there is only one common set.
21706 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
21708 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
21709 Author: Jon Loeliger <jdl@jdl.com>
21710 Date: Wed Jan 23 15:55:02 2008 -0600
21712 86xx: Fix compilation warning in sys_eprom.c
21714 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
21716 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21718 commit 65230107025733e89e28fd5e5cfd916d4953c28a
21719 Author: Haavard Skinnemoen <hskinnemoen at>
21720 Date: Fri Feb 22 11:40:50 2008 +0000
21722 Move AT91RM9200DK board support under board/atmel
21724 We already have a vendor subdir for Atmel, so we should use it.
21726 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
21728 commit 6d0943a6be99977d6d853d51749e9963d68eb192
21729 Author: Andreas Engel <andreas.engel@ericsson.com>
21730 Date: Mon Jan 14 09:06:52 2008 +0000
21732 ARM: cleanup duplicated exception handlingcode
21734 Move duplicated exception handling code into lib_arm.
21736 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
21738 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
21739 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
21740 Date: Fri Feb 1 10:09:03 2008 +0000
21742 Support for Artila M-501 starter kit
21744 Kimmo Leppala / Sysart and
21745 Timo Tuunainen / Sysart
21747 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
21748 Author: Stelian Pop <stelian@popies.net>
21749 Date: Mon Feb 11 10:50:19 2008 +0000
21753 ---------------------------------
21755 read_dataflash() takes a signed char pointer as a parameter. Silence a
21756 few warnings dues to incorrect parameter types in env_dataflash.c.
21758 Signed-off-by: Stelian Pop <stelian@popies.net>
21760 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
21761 Author: Stelian Pop <stelian@popies.net>
21762 Date: Thu Feb 7 09:42:57 2008 +0000
21764 AT91CAP9 support : move board files to Atmel vendor directory.
21766 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
21768 Signed-off-by: Stelian Pop <stelian@popies.net>
21770 commit 7263ef191b87da94768f762c7093bedeb70db98f
21771 Author: Stelian Pop <stelian at>
21772 Date: Thu Jan 3 21:15:56 2008 +0000
21774 AT91CAP9 support : MACB changes
21776 Signed-off-by: Stelian Pop <stelian <at> popies.net>
21777 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
21779 commit 6afcabf11d7321850f4feaadfee841488ace54c5
21780 Author: Stelian Pop <stelian@popies.net>
21781 Date: Thu Feb 7 16:37:54 2008 +0000
21783 AT91CAP9 support : board/ files
21785 Signed-off-by: Stelian Pop <stelian@popies.net>
21787 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
21788 Author: Stelian Pop <stelian at>
21789 Date: Wed Jan 30 21:15:54 2008 +0000
21791 AT91CAP9 support : cpu/ files
21793 Signed-off-by: Stelian Pop <stelian <at> popies.net>
21795 commit fa506a926cec348805143576c941f8e61b333cc0
21796 Author: Stelian Pop <stelian@popies.net>
21797 Date: Thu Jan 31 21:15:53 2008 +0000
21799 AT91CAP9 support : include/ files
21801 Signed-off-by: Stelian Pop <stelian@popies.net>
21803 commit 20b197c6f2799af399a68f96a1aff543a75621b8
21804 Author: Stelian Pop <stelian@popies.net>
21805 Date: Sun Jan 20 19:49:21 2008 +0000
21807 AT91CAP9 support : build integration
21809 Signed-off-by: Stelian Pop <stelian@popies.net>
21811 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
21812 Author: Stelian Pop <stelian@popies.net>
21813 Date: Sun Jan 20 21:07:00 2008 +0000
21815 Improve DataFlash CS definition.
21817 Use a structure instead of the error prone unnamed array to
21818 define the possible dataflash banks.
21820 Signed-off-by: Stelian Pop <stelian@popies.net>
21822 commit a6cdd21b56014208706238712a853a9e9a0a2290
21823 Author: Stelian Pop <stelian@popies.net>
21824 Date: Sat Jan 19 21:09:35 2008 +0000
21826 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
21828 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
21830 cpu/arm926ejs/start.o: In function `cpu_init_crit':
21831 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
21833 Signed-off-by: Stelian Pop <stelian@popies.net>
21835 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
21836 Author: Peter Pearse <peter.pearse@arm.com>
21837 Date: Fri Feb 1 16:50:24 2008 +0000
21839 Fix timer overflow in DaVinci
21840 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
21842 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
21843 Author: Peter Pearse <peter.pearse@arm.com>
21844 Date: Fri Feb 1 16:49:08 2008 +0000
21846 Update board NetStar
21847 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21849 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
21850 Author: Niklaus Giger <niklaus.giger@netstal.com>
21851 Date: Tue Feb 5 10:26:42 2008 +0100
21853 ppc4xx: HCU4/5. Fix make O=../xx
21855 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21857 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
21858 Author: Larry Johnson <lrj@acm.org>
21859 Date: Tue Jan 22 08:51:59 2008 -0500
21861 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
21863 Signed-off-by: Larry Johnson <lrj@acm.org>
21865 commit fe891ecf4d187e9d11dde869ed4623af52b54451
21866 Author: Hiroshi Ito <ito@mlb.co.jp>
21867 Date: Thu Jan 31 18:35:04 2008 +0900
21869 NFS Timeout with large files.
21871 Retry to send NFS packet before reaching timeout.
21873 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
21875 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
21876 Author: Johannes Stezenbach <js@sig21.net>
21877 Date: Tue Jan 29 00:11:25 2008 +0100
21879 Add dependencies to avoid race conditions with parallel make.
21881 Signed-off-by: Johannes Stezenbach <js@sig21.net>
21883 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
21884 Author: Mike Frysinger <vapier@gentoo.org>
21885 Date: Mon Jan 28 05:46:01 2008 -0500
21887 Mark board_init_[fr] as noreturn
21889 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21891 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
21892 Author: Mike Frysinger <vapier@gentoo.org>
21893 Date: Mon Jan 28 05:28:50 2008 -0500
21895 Only use TEXT_BASE if defined by the board
21897 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21899 commit 1b769881750030f10743808b9d6013e11f559350
21900 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21901 Date: Fri Jan 25 07:54:47 2008 +0100
21903 Fix remaining CONFIG_COMMANDS
21908 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21910 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
21911 Author: Niklaus Giger <niklaus.giger@netstal.com>
21912 Date: Mon Jan 21 16:46:00 2008 +0100
21914 Add *~ to .gitignore
21916 One should never add a backup file ending in with ~ to the git repository.
21918 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21920 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
21921 Author: Kumar Gala <galak@kernel.crashing.org>
21922 Date: Thu Jan 17 00:02:10 2008 -0600
21924 Remove duplicate defines for ARRAY_SIZE
21926 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21928 commit c77ce474b1c57b13e9d36d9830f147966c143694
21929 Author: Stelian Pop <stelian@popies.net>
21930 Date: Mon Jan 14 22:08:14 2008 +0100
21932 Fix incorrect address test in AT91F_DataflashSelect().
21934 Signed-off-by: Stelian Pop <stelian@popies.net>
21936 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
21937 Author: Kumar Gala <galak@kernel.crashing.org>
21938 Date: Wed Feb 13 15:09:58 2008 -0600
21940 Fix building of fdt_support.c if DEBUG set
21942 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21944 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
21945 Author: Jon Loeliger <jdl@freescale.com>
21946 Date: Tue Feb 12 14:53:28 2008 -0600
21948 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
21950 These replace direct structure references for IMMR sections.
21952 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21954 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
21955 Author: Wolfgang Denk <wd@denx.de>
21956 Date: Tue Feb 12 00:45:06 2008 +0100
21958 Get rid of "#undef DEBUG" from board config files.
21960 Signed-off-by: Wolfgang Denk <wd@denx.de>
21962 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
21963 Author: Timur Tabi <timur@freescale.com>
21964 Date: Tue Jan 15 17:09:41 2008 -0600
21966 Remove #undef DEBUG from MPC83xx board header files
21968 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
21969 The inclusion of this line makes it impossible to enable debug code in
21970 other source files, because "#define DEBUG" typically needs to be defined
21971 before any header files are included.
21973 Signed-off-by: Timur Tabi <timur@freescale.com>
21975 commit 69018ce2e086e9caf35b914d675b82bc4888f077
21976 Author: Kumar Gala <galak@kernel.crashing.org>
21977 Date: Thu Jan 17 08:25:45 2008 -0600
21979 QE: Move FDT support into a common file
21981 Move the flat device tree setup for QE related devices into
21982 a common file shared between 83xx & 85xx platforms that have QE's.
21984 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21986 commit 5cf746c303710329f8040d9c62ee354313e3e91f
21987 Author: Marian Balakowicz <m8@semihalf.com>
21988 Date: Thu Jan 31 13:59:09 2008 +0100
21990 [new uImage] Move kernel data find code to get_kernel() routine
21992 Verification of the kernel image (in old format) and finding kernel
21993 data is moved to a dedicated routine. The routine will also hold
21994 support for, to be added, new image format.
21996 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21998 commit 7b325454fd231d4273de3fe373850f777fb086bf
21999 Author: Marian Balakowicz <m8@semihalf.com>
22000 Date: Thu Jan 31 13:58:20 2008 +0100
22002 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
22004 Move FDT blob finding and relocation to a dedicated
22005 get_fdt() routine. It increases code readability and
22006 will make adding support for new uImage format easier.
22008 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22010 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
22011 Author: Marian Balakowicz <m8@semihalf.com>
22012 Date: Thu Jan 31 13:58:13 2008 +0100
22014 [new uImage] Cleanup do_botm_linux() boot allocations
22016 This patch moves common pre-boot allocation steps shared between PPC
22017 and M68K to a helper routines:
22020 - get_boot_sp_limit()
22021 - get_boot_cmline()
22025 - set_clocks_in_mhz()
22027 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22029 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
22030 Author: Marian Balakowicz <m8@semihalf.com>
22031 Date: Thu Jan 31 13:57:17 2008 +0100
22033 [new uImage] Move ramdisk loading to a common routine
22035 Ramdisk loading code, including initrd_high variable handling,
22036 was duplicated for PPC and M68K platforms. This patch creates
22037 common helper routine that is being called from both platform
22038 do_bootm_linux() routines.
22040 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22042 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
22043 Author: Marian Balakowicz <m8@semihalf.com>
22044 Date: Thu Jan 31 13:55:53 2008 +0100
22046 [new uImage] Removed dead ramdisk code on microblaze architectures
22048 Microblaze do_bootm_linux() includes ramdisk processing code but
22049 the ramdisk does not get used anywhere later on.
22051 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22053 commit 5ad03eb3854c162684222a718b44c0716ea0db03
22054 Author: Marian Balakowicz <m8@semihalf.com>
22055 Date: Thu Jan 31 13:55:39 2008 +0100
22057 [new uImage] Factor out common image_get_ramdisk() routine
22059 Architecture specific do_bootm_linux() routines share common
22060 ramdisk image processing code. Move this code to a common
22063 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22065 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
22066 Author: Marian Balakowicz <m8@semihalf.com>
22067 Date: Thu Jan 31 13:20:08 2008 +0100
22069 [new uImage] Move FDT error printing to common fdt_error() routine
22071 FDT error handling in PPC do_bootm_linux() shares the same message format.
22072 This patch moves error message printing to a helper fdt_error() routine.
22074 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22075 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
22077 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
22078 Author: Marian Balakowicz <m8@semihalf.com>
22079 Date: Thu Jan 31 13:20:07 2008 +0100
22081 [new uImage] Factor out common routines for getting os/arch/type/comp names
22083 Move numeric-id to name translation for image os/arch/type/comp header
22084 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
22085 image_get_type_name(), image_get_comp_name().
22087 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22089 commit e99c26694a384221d336f6448c06a57479c0baa4
22090 Author: Marian Balakowicz <m8@semihalf.com>
22091 Date: Thu Jan 31 13:20:07 2008 +0100
22093 [new uImage] Remove standalone applications handling from boootm
22095 Standalone applications are supposed to be run using the "go" command.
22096 This patch removes standalone images handling from the do_bootm().
22098 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22100 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
22101 Author: Marian Balakowicz <m8@semihalf.com>
22102 Date: Thu Jan 31 13:20:07 2008 +0100
22104 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
22106 Support for OF_FLAT_TREE is to be obsoleted in the near future,
22107 remove related code from the bootm routines.
22109 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22111 commit 82850f3d32a2661868ec6876bed7a22c55cef718
22112 Author: Marian Balakowicz <m8@semihalf.com>
22113 Date: Thu Jan 31 13:20:06 2008 +0100
22115 [new uImage] Use image API in SH do_bootm_linux() routine
22117 Introduce image handling API for lately added Hitachi SH architecture.
22119 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22121 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
22122 Author: Marian Balakowicz <m8@semihalf.com>
22123 Date: Thu Jan 31 13:20:06 2008 +0100
22125 [new uImage] Rename architecture specific bootm code files
22127 Implementation of the do_bootm_linux() and other bootm helper routines is
22128 architecture specific code. As such it resides in lib_<arch> directories
22129 in files named <arch>_linux.c
22131 This patch renames those files to a more clear and accurate
22132 lib_<arch>/bootm.c form.
22134 List of the renamed files:
22135 lib_arm/armlinux.c -> lib_arm/bootm.c
22136 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
22137 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
22138 lib_i386/i386_linux.c -> lib_i386/bootm.c
22139 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
22140 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
22141 lib_mips/mips_linux.c -> lib_mips/bootm.c
22142 lib_nios/nios_linux.c -> lib_nios/bootm.c
22143 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
22144 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
22145 lib_sh/sh_linux.c -> lib_sh/bootm.c
22147 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22149 commit 7582438c285bf0cef82909d0f232de64ec567a8a
22150 Author: Marian Balakowicz <m8@semihalf.com>
22151 Date: Thu Jan 31 13:20:06 2008 +0100
22153 [new uImage] Return error on image move/uncompress overwrites
22155 Check for overwrites during image move/uncompress, return with error
22156 when the original image gets corrupted. Report clear message to the user
22157 and prevent further troubles when pointer to the corrupted images is passed
22158 to do_bootm_linux routine.
22160 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22162 commit f13e7b2e993c61fed1f607962501e051940d6e80
22163 Author: Marian Balakowicz <m8@semihalf.com>
22164 Date: Tue Jan 8 18:12:17 2008 +0100
22166 [new uImage] Cleanup image header pointer use in bootm code
22168 - use single image header pointer instead of a set of auxilliary variables.
22169 - add multi component image helper routines: get component size/data address
22171 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22173 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
22174 Author: Marian Balakowicz <m8@semihalf.com>
22175 Date: Tue Jan 8 18:17:10 2008 +0100
22177 [new uImage] Cleanup cmd_bootm.c
22179 - sort and cleanup headers, declarations, etc.
22180 - group related routines
22181 - cleanup indentation, white spaces
22183 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22185 commit af13cdbc01eaf88880978bfb4f603e012818ba24
22186 Author: Marian Balakowicz <m8@semihalf.com>
22187 Date: Tue Jan 8 18:11:45 2008 +0100
22189 [new uImage] Add memmove_wd() common routine
22191 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
22193 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22195 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
22196 Author: Marian Balakowicz <m8@semihalf.com>
22197 Date: Tue Jan 8 18:11:44 2008 +0100
22199 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
22201 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22203 commit 15158971f49255ccef54f0979a942cfd3de2ae52
22204 Author: Marian Balakowicz <m8@semihalf.com>
22205 Date: Tue Jan 8 18:11:44 2008 +0100
22207 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
22209 Use image header copy instead of a (possibly corrupted) pointer to
22210 a initial image location.
22212 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22214 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
22215 Author: Marian Balakowicz <m8@semihalf.com>
22216 Date: Tue Jan 8 18:11:44 2008 +0100
22218 [new uImage] Remove I386 uImage fake_header() routine
22220 I386 targets are not using a uImage format, instead fake header
22221 is added to ram image before it is further processed by bootm.
22223 Remove this fixup and force proper uImage use for I386.
22225 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22227 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
22228 Author: Marian Balakowicz <m8@semihalf.com>
22229 Date: Tue Jan 8 18:11:44 2008 +0100
22231 [new uImage] Move CHUNKSZ definition to image.h
22233 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
22234 move this definition to a common header.
22236 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22238 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
22239 Author: Marian Balakowicz <m8@semihalf.com>
22240 Date: Tue Jan 8 18:11:43 2008 +0100
22242 [new uImage] Move gunzip() common code to common/gunzip.c
22244 Move gunzip(), zalloc() and zfree() to a separate file.
22245 Share zalloc() and zfree() with cramfs uncompress routine.
22247 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22249 commit d45d5a18b6b36688f2365623f9d550566c664b5b
22250 Author: Marian Balakowicz <m8@semihalf.com>
22251 Date: Tue Jan 8 18:11:43 2008 +0100
22253 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
22255 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
22256 readable in PPC variant of do_bootm_linux() routine.
22258 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22260 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
22261 Author: Marian Balakowicz <m8@semihalf.com>
22262 Date: Tue Jan 8 18:11:43 2008 +0100
22264 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
22266 PPC implementation of do_bootm_linux() routine is moved to
22267 a dedicated file lib_ppc/ppc_linux.c
22269 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22271 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
22272 Author: Marian Balakowicz <m8@semihalf.com>
22273 Date: Tue Jan 8 18:14:09 2008 +0100
22275 [new uImage] Define a API for image handling operations
22277 - Add inline helper macros for basic header processing
22278 - Move common non inline code common/image.c
22279 - Replace direct header access with the API routines
22280 - Rename IH_CPU_* to IH_ARCH_*
22282 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22284 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
22285 Author: Marian Balakowicz <m8@semihalf.com>
22286 Date: Thu Jan 31 13:19:58 2008 +0100
22288 Add missing cmd_ximg.o to common/Makefile
22290 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22292 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
22293 Author: Grzegorz Bernacki <gjb@semihalf.com>
22294 Date: Mon Jan 28 10:15:02 2008 +0100
22296 ADS5121e: DDR2 init/timing update.
22298 Signed-off-by: John Rigby <jrigby@freescale.com>
22299 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
22301 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
22302 Author: John Rigby <jrigby@freescale.com>
22303 Date: Wed Jan 30 13:36:57 2008 -0700
22305 Device tree updates
22307 Changes to match 5121 device tree going mainline in 2.6.25.
22309 Change OF_SOC from "soc5121" to plain "soc".
22310 Remove unneeded "ref-frequency" fixups.
22311 Remove "address" enetaddr fixup.
22313 Add bus-frequency fixup for old OF_SOC so old
22314 kernels with old device trees will work with new
22315 u-boot with 66MHz IPS clock
22317 Signed-off-by: John Rigby <jrigby@freescale.com>
22319 commit de55d18df3ff2ea614624e74793de7c43520e0e7
22320 Author: John Rigby <jrigby@freescale.com>
22321 Date: Wed Jan 30 13:36:56 2008 -0700
22323 Change IPS freq to 66MHz
22325 Recommended frequency is 66MHz
22326 Change divider from 4 to 3.
22328 Signed-off-by: John Rigby <jrigby@freescale.com>
22330 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
22331 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22332 Date: Mon Jan 14 22:38:55 2008 +0100
22334 xsengine: rename board_post_init to board_late_init
22336 missing migration from "Cleanup of some init functions"
22337 in c837dcb1a316745092567bfe4fb266d0941884ff
22339 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22341 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
22342 Author: Larry Johnson <lrj@acm.org>
22343 Date: Sat Jan 12 23:35:33 2008 -0500
22345 Add attribute POST_PREREL to ECC memory POST
22347 Signed-off-by: Larry Johnson <lrj@acm.org>
22349 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
22350 Author: Kumar Gala <galak@kernel.crashing.org>
22351 Date: Thu Jan 17 08:25:45 2008 -0600
22353 QE: Move FDT support into a common file
22355 Move the flat device tree setup for QE related devices into
22356 a common file shared between 83xx & 85xx platforms that have QE's.
22358 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22360 commit d38da537943cd36356b9d3d9d9b60533554b81d8
22361 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22362 Date: Wed Jan 23 17:20:14 2008 +0100
22364 AVR32: Make SDRAM refresh rate configurable
22366 The existing code assumes the SDRAM row refresh period should always
22367 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
22368 refresh rate should really be 7.81 us.
22370 Add a refresh_period member to struct sdram_info and initialize it
22371 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
22372 panic() until the refresh_period member is updated properly.
22374 Big thanks to Gerhard Berghofer for pointing out this issue.
22376 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22378 commit 61151cccb660cdb06a07fb283de6089913d7bde0
22379 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22380 Date: Thu Apr 19 10:10:11 2007 +0200
22382 ATSTK1000: Fix potential flash programming bug
22384 The (now obsolete) atngw100 flash programming code was having problems
22385 programming the onboard at49bv642 chip. The atstk1000 flash
22386 programming code may have the same bug, so import fix for this problem
22387 from the AVR32 Linux BSP.
22389 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22391 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
22392 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22393 Date: Thu Nov 22 17:04:13 2007 +0100
22395 ATSTK1004: Fix comment about default load address
22397 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
22398 wouldn't have worked anyway since the board can only access 4MB of
22401 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22403 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
22404 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22405 Date: Thu Nov 22 17:01:24 2007 +0100
22407 ATSTK1002: Use SDRAM + 4MB as default load address
22409 Many people run into problems when they compile a big kernel and load
22410 the uImage at the default SDRAM + 2MB address as the kernel will
22411 overwrite the uImage as it is being unpacked. Increase the default
22412 load address so that we can load a 4MB kernel image without any
22415 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22417 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
22418 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22419 Date: Thu Nov 22 16:51:39 2007 +0100
22421 ATNGW100: Fix default mtest range
22423 Let mtest cover the whole SDRAM except the last megabyte, which is
22424 where u-boot lives.
22426 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22428 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
22429 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22430 Date: Tue Jan 22 15:31:56 2008 +0900
22432 sh: Fix register address of SH7722.
22434 The address of SH7722 is wrong by old document.
22435 This patch fixes this problem.
22437 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22439 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
22440 Author: Mike Frysinger <vapier@gentoo.org>
22441 Date: Mon Feb 4 19:26:57 2008 -0500
22443 new command for displaying strings at specified memory locations
22445 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22447 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
22448 Author: Mike Frysinger <vapier@gentoo.org>
22449 Date: Mon Feb 4 19:26:57 2008 -0500
22451 rewrite/cleanup Blackfin RTC driver
22453 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22455 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
22456 Author: Mike Frysinger <vapier@gentoo.org>
22457 Date: Mon Feb 4 19:26:57 2008 -0500
22459 generate u-boot.ldr for Blackfin targets
22461 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22463 commit b779f7a59530436040f157f7841db7ab796542df
22464 Author: Mike Frysinger <vapier@gentoo.org>
22465 Date: Mon Feb 4 19:26:57 2008 -0500
22467 scrub unused symbols
22469 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22471 commit cc2977acc3bbbb7850f16645dd1081f95335868d
22472 Author: Mike Frysinger <vapier@gentoo.org>
22473 Date: Mon Feb 4 19:26:57 2008 -0500
22475 move Blackfin cpu object list to respective cpu directories
22477 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22479 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
22480 Author: Mike Frysinger <vapier@gentoo.org>
22481 Date: Mon Feb 4 19:26:57 2008 -0500
22483 interface to Blackfin on-chip One-Time-Programmable memory
22485 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22487 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
22488 Author: Mike Frysinger <vapier@gentoo.org>
22489 Date: Mon Feb 4 19:26:56 2008 -0500
22491 add support for memory commands with Blackfin L1 instruction memory
22493 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22495 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
22496 Author: Mike Frysinger <vapier@gentoo.org>
22497 Date: Mon Feb 4 19:26:56 2008 -0500
22499 use C code rather than inline assembly
22501 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22503 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
22504 Author: Mike Frysinger <vapier@gentoo.org>
22505 Date: Mon Feb 4 19:26:56 2008 -0500
22507 add Blackfin-specific reginfo command
22509 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22511 commit 0858b835e7ea501ea084d34cef75932f098342bb
22512 Author: Mike Frysinger <vapier@gentoo.org>
22513 Date: Mon Feb 4 19:26:55 2008 -0500
22515 add support for Blackfin symbol prefixes to examples
22517 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22519 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
22520 Author: Mike Frysinger <vapier@gentoo.org>
22521 Date: Mon Feb 4 19:26:55 2008 -0500
22523 add Blackfin-specific bdinfo command
22525 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22527 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
22528 Author: Mike Frysinger <vapier@gentoo.org>
22529 Date: Mon Feb 4 19:26:55 2008 -0500
22531 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
22533 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22535 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
22536 Author: Mike Frysinger <vapier@gentoo.org>
22537 Date: Mon Feb 4 19:26:55 2008 -0500
22539 unify the Blackfin board targets
22541 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22543 commit d4d7730853e5d675f76ec666807da3028c91d592
22544 Author: Mike Frysinger <vapier@gentoo.org>
22545 Date: Mon Feb 4 19:26:55 2008 -0500
22547 punt Blackfin VDSP headers and import sanitized/auto-generated ones
22549 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22551 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
22552 Author: Mike Frysinger <vapier@gentoo.org>
22553 Date: Mon Feb 4 19:26:54 2008 -0500
22555 always pull in asm/blackfin.h for Blackfin ports
22557 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22559 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
22560 Author: Mike Frysinger <vapier@gentoo.org>
22561 Date: Mon Feb 4 19:26:54 2008 -0500
22563 add missing __raw versions of Blackfin read/write io functions
22565 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22567 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
22568 Author: Mike Frysinger <vapier@gentoo.org>
22569 Date: Mon Feb 4 19:26:54 2008 -0500
22571 add the default Blackfin logo used by Blackfin boards with splash screens
22573 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22575 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
22576 Author: Mike Frysinger <vapier@gentoo.org>
22577 Date: Mon Feb 4 19:26:54 2008 -0500
22579 add some more Blackfin docs
22581 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22583 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
22584 Author: Mike Frysinger <vapier@gentoo.org>
22585 Date: Mon Feb 4 19:26:54 2008 -0500
22587 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
22589 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22591 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
22592 Author: Mike Frysinger <vapier@gentoo.org>
22593 Date: Mon Feb 4 19:26:54 2008 -0500
22595 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
22597 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22599 commit b45264ee85cbd92020640a32e02fb434fd557108
22600 Author: Mike Frysinger <vapier@gentoo.org>
22601 Date: Mon Feb 4 19:26:53 2008 -0500
22603 add gitignores for Blackfin pieces
22605 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22607 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
22608 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22609 Date: Fri Jan 18 01:14:03 2008 +0100
22611 TFTP: add host ip addr support
22613 allow to use a different server as set in serverip
22614 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
22615 if not defined the max length will be at 128
22617 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22619 commit e56b4b494cd92def577969f9678395aa22d34c9f
22620 Author: Timur Tabi <timur@freescale.com>
22621 Date: Wed Jan 9 14:35:26 2008 -0600
22623 85xx,86xx: Determine I2C clock frequencies and store in global_data
22625 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
22627 Update the get_clocks() function in 85xx and 86xx to determine the I2C
22628 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
22630 Signed-off-by: Timur Tabi <timur@freescale.com>
22632 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
22633 Author: Wolfgang Denk <wd@denx.de>
22634 Date: Thu Dec 27 10:56:54 2007 +0100
22636 OMAP5912: fix FIFO handling in UART driver
22638 According to the OMAP5912 Serial Interfaces Reference Guide (see
22639 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
22640 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
22641 changed when the baud clock is not running, i. e. when both DLL and
22644 Thus make sure that DLL and DLH are 0 when writing the FCR.
22646 Signed-off-by: Wolfgang Denk <wd@denx.de>
22648 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
22649 Author: Harald Welte <laforge@openmoko.org>
22650 Date: Wed Dec 19 15:10:52 2007 +0100
22652 ARM: S3C24x0 SoC NAND controller support
22654 This patch adds NAND support to the S3C24x0 SoC code in u-boot
22656 Signed-off-by: Harald Welte <laforge@openmoko.org>
22658 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
22659 Author: Harald Welte <laforge@openmoko.org>
22660 Date: Wed Dec 19 14:24:40 2007 +0100
22662 ARM: s3c24xx: Multiple serial port support
22664 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
22666 Signed-off-by: Harald Welte <laforge@openmoko.org>
22668 commit a25f72f1f73a11de68251fb88c89991e202e68fa
22669 Author: Harald Welte <laforge@openmoko.org>
22670 Date: Wed Dec 19 14:16:57 2007 +0100
22672 ARM: arm920t: Allow use of 'gd' pointer from IRQ
22674 This patch allows us to use the 'gd' pointer (and thus environment
22675 and everything else associated with it) from interrupt context on
22678 Signed-off-by: Harald Welte <laforge@openmoko.org>
22680 commit be19bd5cd0f454b63298844a0b5377e029b2caad
22681 Author: Harald Welte <laforge@openmoko.org>
22682 Date: Wed Dec 19 14:19:38 2007 +0100
22684 ARM: arm920/s3c24xx: IRQ demulitplexer callback
22686 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
22687 plus a stub implementation of it for the S3C2410.
22689 The purpose is to allow arm920t implementations such as the s3c24x0 to
22690 implement interrupt handlers in u-boot without having to touch core
22693 Signed-off-by: Harald Welte <laforge@openmoko.org>
22695 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
22696 Author: Hebbar <gururajakr@sanyo.co.in>
22697 Date: Tue Dec 18 16:03:07 2007 -0800
22699 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
22701 Add ifdef to bdinfo command to display ethernet information
22702 only if CONFIG_CMD_NET is defined for arm modules.
22704 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
22706 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
22707 Author: Hebbar <gururajakr@sanyo.co.in>
22708 Date: Tue Dec 18 16:00:54 2007 -0800
22710 ARM: add I2C init function call in lib_arm/board.c
22712 Adds I2C init func call to init sequence for ARM boards. This is
22713 present in ppc,blackfin and other processor init sequence.
22715 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
22717 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
22718 Author: Stefan Roese <sr@denx.de>
22719 Date: Fri Feb 1 09:38:29 2008 +0100
22721 ppc4xx: Fix ndfc HW ECC byte order
22723 The current ndfc HW ECC implementation swaps the first two ECC bytes.
22724 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
22725 so this swapping in the HW ECC driver is bogus. This patch fixes this
22726 problem and now really uses the SMC ECC byte order.
22728 Thanks to Sean MacLennan for pointing this out.
22730 Signed-off-by: Stefan Roese <sr@denx.de>
22732 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
22733 Author: Stefan Roese <sr@denx.de>
22734 Date: Wed Jan 30 15:35:50 2008 +0100
22736 ppc4xx: Fix GPIO configuration for pcs440ep
22738 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
22739 49-63 for GPIO. They have been configured as trace signals. This patch
22740 fixes this by clearing the corresponding bit.
22742 Signed-off-by: Stefan Roese <sr@denx.de>
22744 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
22745 Author: Stefan Roese <sr@denx.de>
22746 Date: Wed Jan 30 14:48:28 2008 +0100
22748 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
22750 Signed-off-by: Stefan Roese <sr@denx.de>
22752 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
22753 Author: Ladislav Michl <ladis@linux-mips.org>
22754 Date: Fri Dec 7 00:42:32 2007 +0100
22756 ARM: Board voiceblue update
22758 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22760 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
22761 Author: Ladislav Michl <ladis@linux-mips.org>
22762 Date: Thu Dec 6 23:24:57 2007 +0100
22764 ARM: AT91RM9200 based boards config cleanup
22766 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22768 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
22771 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
22772 Author: Ladislav Michl <ladis@linux-mips.org>
22773 Date: Thu Dec 6 22:59:16 2007 +0100
22775 ARM: Fix at91rm9200dk base address
22777 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
22778 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
22779 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
22780 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
22781 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
22782 I'm sending this patch 4th (!) time in hope it produces at least some
22785 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22787 Fix at91rm9200dk base and environment address.
22789 commit c95219fae2a7add7daa2f91aedca65b1698465c7
22790 Author: stefano babic <sbabic@denx.de>
22791 Date: Tue Nov 20 10:40:24 2007 +0100
22793 MMC for PXA 27X (resubmit)
22795 MMC support for X_Scale PXA is broken and does not work.
22796 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
22797 There were already some patches around the world but none of them was
22798 merged into the official u-boot tree.
22800 This patch makes order fixing this issue. Resubmit after code cleanup.
22802 Applied and tested on PXA 270 (TrizepsIV module).
22804 Signed-off-by: Stefano Babic <sbabic@denx.de>
22806 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
22807 Author: stefano babic <sbabic@denx.de>
22808 Date: Tue Nov 20 10:37:04 2007 +0100
22810 Fix gcc issues in pxa-regs.h
22812 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
22813 issues generates wrong code.
22814 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
22815 This patch fixes the problem and solves the gcc-4 issues as the linux
22818 Signed-off-by: Stefano Babic <sbabic@denx.de>
22819 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
22821 commit 7047b388876e7b905b2ec4edb8010543e3641b85
22822 Author: Jens Gehrlein <sew_s@tqs.de>
22823 Date: Tue Jan 29 08:45:03 2008 +0100
22825 TQM834x: enable DHCP
22827 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
22828 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22830 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
22831 Author: Jens Gehrlein <sew_s@tqs.de>
22832 Date: Tue Jan 29 08:45:02 2008 +0100
22834 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
22836 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
22837 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22839 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
22840 Author: Ben Warren <biggerbadderben@gmail.com>
22841 Date: Sat Jan 26 23:41:19 2008 -0500
22843 Fix conditional compilation of mpx8xxx_spi driver
22845 This driver should only compile if CONFIG_MPC8XXX_SPI is set
22847 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22848 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22850 commit 63f732d3d3880feb531f48af247c025bf01462b0
22851 Author: Rafal Jaworowski <raj@semihalf.com>
22852 Date: Tue Jan 29 17:00:34 2008 +0100
22854 API: Provide dummy halt() in the glue layer.
22856 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
22858 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
22860 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
22861 Author: Rafal Jaworowski <raj@semihalf.com>
22862 Date: Tue Jan 29 16:57:38 2008 +0100
22864 API: Convert conditional building to the new scheme.
22866 This fixes a build breakage with CONFIG_API enabled, which appeared after
22867 the recent changes in the U-Boot build system.
22869 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
22871 commit 98b742489c09780be6a832eeaa4e5eff824792bb
22872 Author: Wolfgang Denk <wd@denx.de>
22873 Date: Fri Jan 25 09:56:17 2008 +0100
22875 inka4x0: remove dead code
22877 Signed-off-by: Wolfgang Denk <wd@denx.de>
22879 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
22880 Author: Becky Bruce <becky.bruce@freescale.com>
22881 Date: Wed Jan 23 16:31:06 2008 -0600
22883 86xx: Add reginfo command
22885 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22887 commit ddcebcb638715a6278da93b553d5016f99823816
22888 Author: Becky Bruce <becky.bruce@freescale.com>
22889 Date: Wed Jan 23 16:31:05 2008 -0600
22891 86xx: Add print_laws function to fsl_law.c
22893 This can be used for debug, and will be used by board code
22894 to help implement reginfo.
22896 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22898 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
22899 Author: Becky Bruce <becky.bruce@freescale.com>
22900 Date: Wed Jan 23 16:31:04 2008 -0600
22902 86xx: Remove old-style law setup code
22904 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
22906 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22908 commit 713d8186649dae874613d495b0cecaa039a98b30
22909 Author: Becky Bruce <becky.bruce@freescale.com>
22910 Date: Wed Jan 23 16:31:03 2008 -0600
22912 86xx: Convert sbc8641d to use new law setup code.
22914 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22916 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
22917 Author: Becky Bruce <becky.bruce@freescale.com>
22918 Date: Wed Jan 23 16:31:02 2008 -0600
22920 86xx: Convert mpc8610hpcd to new law setup method.
22922 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22924 commit 4933b91f8a49e436681f163df3173beb91cac44a
22925 Author: Becky Bruce <becky.bruce@freescale.com>
22926 Date: Wed Jan 23 16:31:01 2008 -0600
22928 86xx: Support new law setup method and convert mpc8641
22930 Adds the support code in cpu/mpc86xx for the new law setup code
22931 recently created fsl_law.c, and changes the MPC8641HPCN config
22934 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22936 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
22937 Author: Becky Bruce <becky.bruce@freescale.com>
22938 Date: Wed Jan 23 16:31:00 2008 -0600
22940 86xx: Rearrange the sequence in start.S
22942 * split the BAT initialization so that only 2 BATs (for the boot page
22943 and stack) are programmed very early on. The rest are initialized later.
22944 * Move other BAT setup, ccsrbar setup, and law setup later in the code
22945 after translation has been enabled.
22947 These changes will facilitate the moving of law and BAT initialization
22948 to C code, and will aid with 36-bit physical addressing support.
22950 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22952 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
22953 Author: Wolfgang Denk <wd@denx.de>
22954 Date: Wed Jan 23 14:41:37 2008 +0100
22956 Coding Style Cleanup; update CHANGELOG
22958 Signed-off-by: Wolfgang Denk <wd@denx.de>
22960 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
22961 Author: Wolfgang Denk <wd@denx.de>
22962 Date: Wed Jan 23 14:31:17 2008 +0100
22964 Coding Style Cleanup; update CHANGELOG
22966 Signed-off-by: Wolfgang Denk <wd@denx.de>
22968 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
22969 Author: Dave Liu <r63238@freescale.com>
22970 Date: Fri Jan 18 10:07:04 2008 +0800
22972 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
22974 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
22975 cause the 83xx immap broken, so the DMA and PCI will
22978 The patch fix the struct spi8xxx and rm struct spi83xx.
22980 Signed-off-by: Dave Liu <daveliu@freescale.com>
22981 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22983 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
22984 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22985 Date: Sat Apr 14 17:11:49 2007 +0200
22987 AVR32: ATNGW100 board support
22989 Add support for the ATNGW100 Network Gateway reference design,
22990 including flash, ethernet and MMC support.
22992 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22994 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
22995 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22996 Date: Sat Nov 24 18:15:31 2007 +0100
22998 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
23000 I don't know why the relevant layers can't do this by itself, but this
23003 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23005 commit 799891ef7b1b3432032ec23466df6b665a797fa4
23006 Author: Michael Schwingen <michael@schwingen.org>
23007 Date: Fri Jan 18 00:04:28 2008 +0100
23009 Add AcTux board support
23013 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
23015 contain changes for multiple boards, the board-specific files follow as
23018 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23020 commit 66a4344a4d910a11125df7768899ad529719855e
23021 Author: Michael Schwingen <michael@schwingen.org>
23022 Date: Wed Jan 16 19:53:23 2008 +0100
23024 add AcTux-4 board support
23026 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23028 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
23029 Author: Michael Schwingen <michael@schwingen.org>
23030 Date: Wed Jan 16 19:51:55 2008 +0100
23032 add AcTux-3 board support
23034 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23036 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
23037 Author: Michael Schwingen <michael@schwingen.org>
23038 Date: Wed Jan 16 19:51:14 2008 +0100
23040 add AcTux-2 board support
23042 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23044 commit ea99e8f05b7240fd657739e286664664ae160abe
23045 Author: Michael Schwingen <michael@schwingen.org>
23046 Date: Wed Jan 16 19:50:37 2008 +0100
23048 add AcTux-1 board support
23050 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23052 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
23053 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23054 Date: Mon Jan 14 19:20:08 2008 +0100
23056 ARM: remove useless function board_post_init
23058 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23060 commit 96bd462942022e4569b582c072a0ed26de1cd19b
23061 Author: Michael Schwingen <michael@schwingen.org>
23062 Date: Thu Jan 10 14:59:46 2008 +0100
23066 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
23067 No handshaking is done, but the active RTS signal allows to
23068 connect to the target using a PC which is using RTS/CTS
23069 handshake, and does no harm if the PC is set to ignore RTS.
23071 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23073 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
23074 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23075 Date: Mon Jan 7 08:41:34 2008 +0100
23077 IXP: add dynamic microcode addr
23079 allow to load the microde from flash or ram by download it through
23080 the serial or other.
23082 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23083 Acked-by: Stefan Roese <sr@denx.de>
23085 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
23086 Author: Michael Schwingen <michael@schwingen.org>
23087 Date: Sat Nov 10 15:44:12 2007 +0100
23089 load ixp42x NPE firmware from separate flash block, remove dead code
23093 the following patch adds support to move the IXP42X NPE firmware to a
23094 separate flash block, whose start address is defined in
23095 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
23096 NPE-enabled u-boot without copyright problems due to the NPE firmware.
23098 I hope the patch applies, I get whitespace-related differences in the NPE
23099 files due to trailing whitespace in the original versions.
23101 Signed-off-by: Michael Schwingen <michael@schwingen.org>
23102 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23104 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
23105 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23106 Date: Tue Jan 15 14:15:46 2008 -0600
23108 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
23110 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23111 Signed-off by: John Rigby <jrigby@freescale.com>
23113 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
23114 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23115 Date: Tue Jan 15 14:02:49 2008 -0600
23117 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
23119 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23120 Signed-off by: John Rigby <jrigby@freescale.com>
23122 commit 777d1abd9796f1c2e148417cc10657e847d318ce
23123 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23124 Date: Tue Jan 15 14:00:25 2008 -0600
23126 ColdFire: Add MCF547x_8x FEC driver
23128 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23129 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23130 Signed-off by: John Rigby <jrigby@freescale.com>
23132 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
23133 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23134 Date: Tue Jan 15 13:54:09 2008 -0600
23136 ColdFire: Add MCF547x_8x dma code and header files
23138 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23139 Signed-off by: John Rigby <jrigby@freescale.com>
23141 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
23142 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23143 Date: Tue Jan 15 13:52:03 2008 -0600
23145 ColdFire: Add MCF547x_8x dma code - 2
23147 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23148 Signed-off by: John Rigby <jrigby@freescale.com>
23150 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
23151 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23152 Date: Tue Jan 15 13:48:52 2008 -0600
23154 ColdFire: Add MCF547x_8x dma code - 1
23156 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23157 Signed-off by: John Rigby <jrigby@freescale.com>
23159 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
23160 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23161 Date: Tue Jan 15 13:39:44 2008 -0600
23163 ColdFire: Add MCF547x_8x related header files
23165 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23166 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23167 Signed-off by: John Rigby <jrigby@freescale.com>
23169 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
23170 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23171 Date: Tue Jan 15 13:37:34 2008 -0600
23173 ColdFire: Add MCF547x_8x cpu arch
23175 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23176 Signed-off by: John Rigby <jrigby@freescale.com>
23178 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
23179 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23180 Date: Mon Jan 14 17:47:23 2008 -0600
23182 ColdFire: Add MCF5227x cpu and M52277EVB support-3
23184 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23185 Signed-off by: John Rigby <jrigby@freescale.com>
23187 commit c87581027994c148131b2f11aa75501f782ec19a
23188 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23189 Date: Mon Jan 14 17:46:19 2008 -0600
23191 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
23193 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23194 Signed-off by: John Rigby <jrigby@freescale.com>
23196 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
23197 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23198 Date: Mon Jan 14 17:43:33 2008 -0600
23200 ColdFire: Add MCF5227x cpu and M52277EVB support-1
23202 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23203 Signed-off by: John Rigby <jrigby@freescale.com>
23205 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
23206 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23207 Date: Mon Jan 14 17:35:44 2008 -0600
23209 ColdFire: Fix CFI Flash low level Read/Write macro
23211 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23212 Signed-off by: John Rigby <jrigby@freescale.com>
23214 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
23215 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23216 Date: Mon Jan 14 17:23:08 2008 -0600
23218 ColdFire: Add M5373EVB platform support - 2
23220 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23221 Signed-off by: John Rigby <jrigby@freescale.com>
23223 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
23224 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23225 Date: Mon Jan 14 17:19:54 2008 -0600
23227 ColdFire: Add M5373EVB platform support - 1
23229 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23230 Signed-off by: John Rigby <jrigby@freescale.com>
23232 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
23233 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23234 Date: Mon Jan 14 17:17:03 2008 -0600
23236 ColdFire: Update FlexBus CS for MCF532x
23238 Definition update and change from 16bit to 32bit
23240 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23241 Signed-off by: John Rigby <jrigby@freescale.com>
23243 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
23244 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23245 Date: Mon Jan 14 17:11:47 2008 -0600
23247 ColdFire: PCI and misc updates for MCF5445x
23249 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23250 Signed-off by: John Rigby <jrigby@freescale.com>
23252 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
23253 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23254 Date: Mon Jan 14 17:06:55 2008 -0600
23256 ColdFire: MCF5445x header files cleanup
23258 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23259 Signed-off by: John Rigby <jrigby@freescale.com>
23261 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
23262 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23263 Date: Mon Jan 14 16:59:42 2008 -0600
23265 ColdFire: MCF532x header files cleanup
23267 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23268 Signed-off by: John Rigby <jrigby@freescale.com>
23270 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
23271 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23272 Date: Mon Jan 14 15:30:15 2008 -0600
23274 ColdFire: Add modules header files
23276 Add CF specific modules header files
23278 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23279 Signed-off-by: John Rigby <jrigby@freescale.com>
23281 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
23282 Author: Kim Phillips <kim.phillips@freescale.com>
23283 Date: Thu Jan 17 12:48:00 2008 -0600
23285 codingstyle cleanup for spi driver
23287 ..and rm unused CONFIG_FSL_SPI define
23289 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23291 commit d59feffb42c9f174116db7a82a311df98983dfce
23292 Author: Haiying Wang <Haiying.Wang@freescale.com>
23293 Date: Wed Jan 16 17:12:12 2008 -0500
23295 FSL: Fix common EEPROM_data structure definition
23297 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
23298 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
23301 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
23303 commit 6bee764bd6da510a4aad614880300c968bc7318d
23304 Author: Timur Tabi <timur@freescale.com>
23305 Date: Wed Jan 16 15:48:12 2008 -0600
23307 86xx: enable command-line editing
23309 Enable command-line editing for all MPC86xx boards.
23311 Signed-off-by: Timur Tabi <timur@freescale.com>
23313 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
23314 Author: Ben Warren <biggerbadderben@gmail.com>
23315 Date: Wed Jan 16 22:37:42 2008 -0500
23317 Implement hard SPI driver on MPC8349EMDS
23319 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
23320 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
23322 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23323 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23325 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
23326 Author: Ben Warren <biggerbadderben@gmail.com>
23327 Date: Wed Jan 16 22:37:35 2008 -0500
23329 Add support for a Freescale non-CPM SPI controller
23331 This patch adds support for the SPI controller found on Freescale PowerPC
23332 processors such as the MCP834x family. Additionally, a new config option,
23333 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
23335 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23336 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23338 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
23339 Author: Dave Liu <r63238@freescale.com>
23340 Date: Thu Jan 17 18:23:19 2008 +0800
23342 mpc83xx: Fix the fatal conflict of merge
23344 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
23345 will cause the mpc8315erdb board can't boot up.
23347 The patch fix that bug, and remove the duplicated #ifdef
23348 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
23349 MPC8313E processor.
23351 Signed-off-by: Dave Liu <daveliu@freescale.com>
23352 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23354 commit 3259eeaa4148125a81417477f62c05bd67f60587
23355 Author: Larry Johnson <lrj@acm.org>
23356 Date: Thu Jan 17 08:50:09 2008 -0500
23358 Merge Sequoia beautification into Korat code
23360 Signed-off-by: Larry Johnson <lrj@acm.org>
23362 commit e16925773211291b562e77187061e9dd1d757217
23363 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23364 Date: Thu Jan 17 07:45:05 2008 +0100
23366 net: add 'ethrotate' environment variable
23368 [PATCH] net: add 'ethrotate' environment variable
23370 This patch replaces the buildtime configuration option
23371 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
23372 configuration veriable. See README.
23374 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23375 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23377 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
23378 Author: Stefan Roese <sr@denx.de>
23379 Date: Thu Jan 17 14:29:04 2008 +0100
23381 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
23383 Signed-off-by: Stefan Roese <sr@denx.de>
23385 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
23386 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23387 Date: Thu Jan 17 18:07:32 2008 +0900
23389 sh: Remove CONFIG_COMMANDS from MS7720SE config file
23391 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23393 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
23394 Author: Niklaus Giger <niklaus.giger@netstal.com>
23395 Date: Wed Jan 16 18:39:20 2008 +0100
23397 ppc4xx: Netstal HCU4 board: added various fixes and POST
23399 - Moved some common code to netstal/common/nm_bsp.c.
23400 - sdram initialisation goes go netstal/common/fixed_sdram.c.
23401 - Added support for POST.
23402 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
23404 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23406 commit 69b0634a4ee98c9791815600d43b99f626a952f3
23407 Author: Niklaus Giger <niklaus.giger@netstal.com>
23408 Date: Thu Jan 17 12:53:56 2008 +0100
23410 ppc4xx: netstal/common define routines used by all boards
23412 Added some routines used by all Netstal boards:
23413 - nm_bsp.c: - nm_show_print and
23414 - common_misc_init_r
23415 - set_params_for_sw_install. Very specific code to handle our SW
23416 installation procedure
23417 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
23418 to handle sdram initialization.
23419 - nm.h: Common header
23421 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23423 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
23424 Author: Niklaus Giger <niklaus.giger@netstal.com>
23425 Date: Wed Jan 16 18:39:18 2008 +0100
23427 ppc4xx: Netstal HCU5 board: added various fixes and POST
23429 - Moved some common code to nestal/common/nm_bsp.c.
23430 - Added support for the vxWorks EDR.
23431 - Enable trace for Lauterbach, if present.
23432 - Added support for POST.
23433 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
23435 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23437 commit 4371090e5da77edc7bf9f296364db4801639d9c4
23438 Author: Niklaus Giger <niklaus.giger@netstal.com>
23439 Date: Wed Jan 16 18:39:08 2008 +0100
23441 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
23444 - Reduced rom_size from 384 to 320 kB
23445 - Environment is now in flash
23449 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23451 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
23452 Author: Niklaus Giger <niklaus.giger@netstal.com>
23453 Date: Wed Jan 16 18:37:50 2008 +0100
23455 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
23458 - Reduced rom_size from 384 to 320 kB
23459 - Environment is now in flash
23463 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23465 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
23466 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23467 Date: Thu Jan 17 10:53:08 2008 +0100
23469 ppc4xx: Complete DU440 board support
23471 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23473 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
23474 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23475 Date: Thu Jan 17 10:52:30 2008 +0100
23477 ppc4xx: Add DU440 board support
23479 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23481 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
23482 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23483 Date: Thu Jan 17 15:53:52 2008 +0900
23485 sh: Update SuperH SCIF driver
23487 This patch fixed wrong SH7720 CPU macro and changed macro that
23488 calculated value of SCBRR register.
23490 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23492 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
23493 Author: Grzegorz Bernacki <gjb@semihalf.com>
23494 Date: Wed Jan 16 15:12:47 2008 +0100
23496 Set ips dividor to 1/4 of csb clock.
23498 Previous setting cause ips clock to be out of spec. This bug was found by John
23499 Rigby from Freescale.
23501 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
23503 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
23504 Author: Kumar Gala <galak@kernel.crashing.org>
23505 Date: Thu Jan 17 02:19:18 2008 -0600
23507 85xx: Get ride of old TLB setup code
23509 Now that all boards have been converted, remove old config code and the
23510 config option for the new style.
23512 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23514 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
23515 Author: Kumar Gala <galak@kernel.crashing.org>
23516 Date: Thu Jan 17 02:02:10 2008 -0600
23518 85xx: Convert TQM85xx to new TLB setup
23520 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23522 commit 74121b470c14f7eaf284ee838bffca6f9521069e
23523 Author: Kumar Gala <galak@kernel.crashing.org>
23524 Date: Thu Jan 17 01:56:32 2008 -0600
23526 85xx: Convert STXGP3 & STXSSA to new TLB setup
23528 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23530 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
23531 Author: Kumar Gala <galak@kernel.crashing.org>
23532 Date: Thu Jan 17 01:44:34 2008 -0600
23534 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
23536 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23538 commit 818218bac6a11591e2542c344d2330e0f4e1968b
23539 Author: Kumar Gala <galak@kernel.crashing.org>
23540 Date: Thu Jan 17 01:31:34 2008 -0600
23542 85xx: Convert PM854/PM856 to new TLB setup
23544 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23546 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
23547 Author: Kumar Gala <galak@kernel.crashing.org>
23548 Date: Thu Jan 17 01:25:33 2008 -0600
23550 85xx: Convert MPC8540EVAL to new TLB setup
23552 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23554 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
23555 Author: Kumar Gala <galak@kernel.crashing.org>
23556 Date: Thu Jan 17 01:12:22 2008 -0600
23558 85xx: Convert MPC8568 MDS to new TLB setup
23560 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23562 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
23563 Author: Kumar Gala <galak@kernel.crashing.org>
23564 Date: Thu Jan 17 01:01:09 2008 -0600
23566 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
23568 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23570 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
23571 Author: Kumar Gala <galak@kernel.crashing.org>
23572 Date: Thu Jan 17 00:52:29 2008 -0600
23574 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
23576 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23578 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
23579 Author: Kumar Gala <galak@kernel.crashing.org>
23580 Date: Thu Jan 17 00:32:17 2008 -0600
23582 85xx: Convert ATUM8548 to new TLB setup
23584 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23586 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
23587 Author: Kumar Gala <galak@kernel.crashing.org>
23588 Date: Wed Jan 16 23:11:57 2008 -0600
23590 85xx: Convert MPC8544 DS to new TLB setup
23592 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23594 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
23595 Author: Kumar Gala <galak@kernel.crashing.org>
23596 Date: Wed Jan 16 22:38:34 2008 -0600
23598 85xx: Reworked initial processor init
23600 Reworked the initial processor initialzation sequence:
23601 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
23602 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
23603 * Reworked initial asm code to do most of the core init before TLBs
23605 The main reasons for these changes are to allow handling of 36-bit phys
23606 addresses in the future and some of the issues that will exist when we
23609 There are a few caveats on what can be initialized via the LAW and TLB
23611 * TLB entry 14/15 can't be initialized via the TLB table
23612 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
23613 the code that is currently executing.
23615 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23617 commit 44a23cfd6360a68eaa41f945190618a55519eac3
23618 Author: Kumar Gala <galak@kernel.crashing.org>
23619 Date: Wed Jan 16 22:33:22 2008 -0600
23621 85xx: Introduce new tlb API
23623 Add a set of functions to manipulate TLB entries:
23624 * set_tlb() - write a tlb entry
23625 * invalidate_tlb() - invalidate a tlb array
23626 * disable_tlb() - disable a variable size tlb entry
23627 * init_tlbs() - setup initial tlbs based on static table
23629 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23631 commit be88b1699863c262818f3af7f60173b4d48df8fc
23632 Author: Stefan Roese <sr@denx.de>
23633 Date: Thu Jan 17 07:50:17 2008 +0100
23635 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
23637 Signed-off-by: Stefan Roese <sr@denx.de>
23639 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
23640 Author: Kumar Gala <galak@kernel.crashing.org>
23641 Date: Wed Jan 16 10:04:42 2008 -0600
23643 85xx: Use proper defines for PCI addresses
23645 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
23646 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
23647 be used for configuring the PCI ATMU.
23649 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23651 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
23652 Author: Kumar Gala <galak@kernel.crashing.org>
23653 Date: Wed Jan 16 09:22:29 2008 -0600
23655 85xx: Remove old style of LAW init
23657 All boards are now using the new fsl_law code so we can drop the old version.
23659 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23661 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
23662 Author: Kumar Gala <galak@kernel.crashing.org>
23663 Date: Wed Jan 16 09:15:29 2008 -0600
23665 85xx: convert remaining 85xx boards over to use new LAW init code
23667 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
23668 to use new LAW init code.
23670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23672 commit 572b13afc42710f2957c382a710360429c0e099b
23673 Author: Kumar Gala <galak@kernel.crashing.org>
23674 Date: Wed Jan 16 09:11:53 2008 -0600
23676 85xx: convert STXGP3/STXSSA over to use new LAW init code
23678 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23680 commit 45f2166ac0233a9263058378f39612bd11f61196
23681 Author: Kumar Gala <galak@kernel.crashing.org>
23682 Date: Wed Jan 16 09:06:48 2008 -0600
23684 85xx: convert PM854/PM856 over to use new LAW init code
23686 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23688 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
23689 Author: Kumar Gala <galak@kernel.crashing.org>
23690 Date: Wed Jan 16 09:05:27 2008 -0600
23692 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
23694 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23696 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
23697 Author: Kumar Gala <galak@kernel.crashing.org>
23698 Date: Wed Jan 16 01:45:10 2008 -0600
23700 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
23702 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23704 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
23705 Author: Kumar Gala <galak@kernel.crashing.org>
23706 Date: Wed Jan 16 01:32:06 2008 -0600
23708 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
23710 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23712 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
23713 Author: Kumar Gala <galak@kernel.crashing.org>
23714 Date: Wed Jan 16 01:16:16 2008 -0600
23716 85xx: convert MPC8544 DS over to use new LAW init code
23718 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23720 commit 83d40dfd79fe868796275802f60116d84b9e4395
23721 Author: Kumar Gala <galak@kernel.crashing.org>
23722 Date: Wed Jan 16 01:13:58 2008 -0600
23724 85xx: Move LAW init code into C
23726 Move the initialization of the LAWs into C code and provide an API
23727 to allow modification of LAWs after init.
23729 Board code is responsible to provide a law_table and num_law_entries.
23731 We should be able to use the same code on 86xx as well.
23733 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23735 commit bed8ce838a609aaab136d43b25e6df2a520bc854
23736 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23737 Date: Sat Dec 22 15:03:12 2007 +0100
23739 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
23741 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23743 commit 0764c164fed6277d359cf132d55187ea34290114
23744 Author: Vlad Lungu <vlad@comsys.ro>
23745 Date: Wed Jan 16 19:27:51 2008 +0200
23747 MIPS:Target support for qemu -M mips
23749 With serial, NE2000, IDE support. Tested in big-endian mode.
23750 Memory size hard-coded to 128M for now, so don't play with
23753 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
23755 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
23756 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23757 Date: Fri Jan 11 00:01:37 2008 +0100
23759 Fix nfs command help to reflect that the serverip is optional
23761 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23762 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23764 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
23765 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23766 Date: Mon Dec 10 22:32:14 2007 +0100
23768 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
23770 and move is_valid_ether_addr board file
23772 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23773 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23775 commit c2f896b8fc4722e36915903e1942e138e68ce804
23776 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23777 Date: Wed Jan 16 16:13:31 2008 +0900
23779 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
23781 rx_status on the memory is basically in LE, but needs to be handled in CPU
23782 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
23785 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23786 Cc: Masami Komiya <mkomiya@sonare.it>
23787 Cc: Lucas Jin <lucasjin@gmail.com>
23788 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23790 commit 96a236746fe6a7b84802afb4ed31536696d34812
23791 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23792 Date: Wed Jan 16 16:12:26 2008 +0900
23794 drivers/net/rtl8139.c: Fix cache coherency issues
23796 Current driver is meant for cache coherent systems. This patch adds
23797 flush_cache() routines to support cache non-coherent systems.
23799 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23800 Cc: Masami Komiya <mkomiya@sonare.it>
23801 Cc: Lucas Jin <lucasjin@gmail.com>
23802 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23804 commit d1276c76c1e2b5035296689280ba1acb2c425104
23805 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23806 Date: Wed Jan 16 16:11:14 2008 +0900
23808 drivers/net/rtl8139.c: Fix tx timeout
23810 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
23811 does, the condition "(currticks() < to)" becomes invalid and immediately
23812 leads to tx timeout error. This patch introduces the fine-graded udely(10)
23813 loops to ease the impact of wrapping around.
23815 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23816 Cc: Masami Komiya <mkomiya@sonare.it>
23817 Cc: Lucas Jin <lucasjin@gmail.com>
23818 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23820 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
23821 Author: Dave Liu <r63238@freescale.com>
23822 Date: Fri Jan 11 18:45:28 2008 +0800
23824 TSEC: Add the support for RealTek RTL8211B PHY
23826 Add the support of RealTek RTL8211B PHY, the RTL8211B
23827 PHY only supports RGMII and MII mode.
23829 Signed-off-by: Dave Liu <daveliu@freescale.com>
23830 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23832 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
23833 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23834 Date: Wed Jan 16 09:40:41 2008 +0100
23836 Remove annoying debug printout for PHY less boards.
23838 PHY less board prints out lots of "read wrong ...":
23839 read wrong value : mii_id 3,mii_reg 2, base e0102320
23840 read wrong value : mii_id 3,mii_reg 3, base e0102320
23841 UEC: PHY is Generic MII (ffffffff)
23842 read wrong value : mii_id 3,mii_reg 4, base e0102320
23843 read wrong value : mii_id 3,mii_reg 0, base e0102320
23844 read wrong value : mii_id 3,mii_reg 1, base e0102320
23845 read wrong value : mii_id 3,mii_reg 1, base e0102320
23846 read wrong value : mii_id 3,mii_reg 5, base e0102320
23847 read wrong value : mii_id 3,mii_reg 1, base e0102320
23848 read wrong value : mii_id 3,mii_reg 1, base e0102320
23849 read wrong value : mii_id 3,mii_reg 5, base e0102320
23850 FSL UEC0: Full Duplex
23851 FSL UEC0: Speed 100BT
23852 FSL UEC0: Link is up
23853 Using FSL UEC0 device
23855 Make this printout depend on UEC_VERBOSE_DEBUG and
23856 remove its definition in uec_phy.c
23858 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23859 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23861 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
23862 Author: Kim Phillips <kim.phillips@freescale.com>
23863 Date: Tue Jan 15 14:11:00 2008 -0600
23865 net: reduce boot latency on QE UEC based boards
23867 actually polling for PHY autonegotiation to finish enables us to remove the
23868 5 second boot prompt latency present on QE based boards.
23870 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
23871 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
23872 code shamelessly stolen from tsec driver.
23874 also rm unused CONFIG_RMII_MODE code.
23876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23877 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23878 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23880 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
23881 Author: michael.firth@bt.com <michael.firth@bt.com>
23882 Date: Wed Jan 16 11:40:51 2008 +0000
23884 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
23886 The current TSEC driver limits MDIO access to the devices that have been configured as attached
23887 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
23889 Signed-off-by: Michael Firth <michael.firth@bt.com>
23890 Acked-by: Andy Fleming <afleming@freescale.com>
23891 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23893 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
23894 Author: Kim Phillips <kim.phillips@freescale.com>
23895 Date: Wed Jan 16 00:38:05 2008 -0600
23897 Add support for the MPC837xERDB
23899 MPC837xERDB board support includes:
23900 * DDR2 330MHz hardcoded (soldered on the board)
23901 * Local Bus NOR Flash
23902 * I2C, UART and RTC
23903 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
23904 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
23907 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
23908 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
23909 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23911 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
23912 Author: Kim Phillips <kim.phillips@freescale.com>
23913 Date: Wed Jan 16 12:06:16 2008 -0600
23915 mpc83xx: add support for more system clock performance controls
23917 System registers that are modified are the Arbiter Configuration
23918 Register (ACR), the System Priority Control Register (SPCR), and the
23919 System Clock Configuration Register (SCCR).
23921 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
23922 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
23923 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23925 commit 16c3cde050e2d243e62b37486f1558570787beb8
23926 Author: James Yang <james.yang@freescale.com>
23927 Date: Wed Jan 16 11:58:08 2008 -0600
23929 FSL: Generalize PIXIS reset command parsing.
23931 Before, the order of arguments to the pixis_reset
23932 command needed to be supplied in a hard-coded order.
23933 Generalize the command parsing to allow any order.
23935 Signed-off-by: James Yang <james.yang@freescale.com>
23936 Acked-by: Jon Loeliger <jdl@freescale.com>
23938 commit ad8f8687b78c3e917b173f038926695383c55555
23939 Author: Jon Loeliger <jdl@freescale.com>
23940 Date: Tue Jan 15 13:42:41 2008 -0600
23942 FSL: Convert board/freescale/common/Makefile to use CONFIG_
23944 Convert the board/freescale/common/Makefile to use
23945 CONFIG_* options to select which files to conditionally
23946 compile into the board/freescale/common library rather
23947 than conditionally compiling entire files.
23954 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
23956 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23958 commit 7c2221eb230372a9e537c4f6636b147b0909325f
23959 Author: Roy Zang <tie-fei.zang@freescale.com>
23960 Date: Tue Jan 15 16:38:38 2008 +0800
23962 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
23964 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
23965 Remove unused ethernet CONFIG_ options.
23967 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23968 Acked-by: Jon Loeliger <jdl@freescale.com>
23970 commit 711a7946277d2e29af481011e8635e9975c54e45
23971 Author: Kim Phillips <kim.phillips@freescale.com>
23972 Date: Tue Jan 15 14:05:14 2008 -0600
23974 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
23976 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
23978 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23980 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
23981 Author: Kim Phillips <kim.phillips@freescale.com>
23982 Date: Tue Jan 15 09:51:12 2008 -0600
23984 mpc83xx: clean up mpc8360emds.c warnings
23986 mpc8360emds.c: In function 'ft_board_setup':
23987 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
23988 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
23989 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
23990 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
23991 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
23992 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
23994 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23996 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
23997 Author: Kim Phillips <kim.phillips@freescale.com>
23998 Date: Mon Jan 14 16:14:46 2008 -0600
24000 mpc83xx: fix phy-connection-type fixup code
24002 use tree passed to us in local blob, not global fdt.
24004 Also use fdt_path_offset to convert to relative offset, since absolute
24005 reference is needed to check for rgmii-id mode string value.
24007 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24009 commit 2b4c952be7c4357a13e839d48df80853820c33eb
24010 Author: Kumar Gala <galak@kernel.crashing.org>
24011 Date: Mon Jan 14 09:01:40 2008 -0600
24013 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
24015 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24016 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24018 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
24019 Author: Poonam Aggrwal <b10812@freescale.com>
24020 Date: Mon Jan 14 09:41:14 2008 +0530
24022 Changes in uboot DDR configuration for MPC8313eRDB
24024 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
24025 DDR configuration in u-boot code. Some are related to performance, some
24026 affect stability and some correct few basic errors in the current
24029 The changes have been tested and found to give better memory latency
24030 figures on MPC8313eRDB.LMBench figures prove it.
24034 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
24035 (this may improve performance for application with many read
24036 or write to open pages).
24037 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
24038 001 (activating all the CS when only one is used may cause
24039 unwanted noise on the system)
24041 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
24043 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
24045 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
24046 comply with the 3 ODT clk requirements)
24047 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
24048 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
24050 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
24051 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
24053 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
24054 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
24056 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
24057 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
24059 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
24060 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
24061 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
24062 Cc: Josep P J <PJ.Joseph@freescale.com>
24063 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24065 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
24066 Author: Jerry Van Baren <gvb.uboot@gmail.com>
24067 Date: Sat Jan 12 13:24:14 2008 -0500
24069 Enable the isdram command on the MPC8360EMDS board
24071 The isdram command prints out decoded information the "serial presence
24072 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
24073 debugging memory configuration problems.
24075 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
24076 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24078 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
24079 Author: Dave Liu <r63238@freescale.com>
24080 Date: Fri Jan 11 18:48:24 2008 +0800
24082 mpc83xx: Add the support for MPC8315ERDB board
24085 - Boot from NOR Flash
24086 - DDR2 266MHz hardcoded configuration
24087 - Local bus NOR Flash R/W operation
24088 - I2C, UART, MII and RTC
24092 Signed-off-by: Dave Liu <daveliu@freescale.com>
24093 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24095 commit b05884efa614e4d8a9413158fc228e0dc02ab704
24096 Author: Dave Liu <r63238@freescale.com>
24097 Date: Fri Jan 11 18:46:50 2008 +0800
24099 mpc83xx: Add config of eTSEC emergency priority in SPCR
24101 The TSEC emergency priority definition of 831x/837x
24102 is different than the definition of 834x in SPCR register.
24104 Add the other config of TSEC emergency priority into
24107 Signed-off-by: Dave Liu <daveliu@freescale.com>
24108 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24110 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
24111 Author: Dave Liu <r63238@freescale.com>
24112 Date: Fri Jan 11 18:42:19 2008 +0800
24114 mpc83xx: Remove cache config from MPC8360ERDK.h
24116 The MPC8360ERDK board support patch is added before
24117 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
24118 so, miss clean up it.
24120 The patch clean up the miss cache config.
24122 Signed-off-by: Dave Liu <daveliu@freescale.com>
24123 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24125 commit cd9d23053d435c08fc8695017b5cb9003fcda786
24126 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24127 Date: Mon Jan 14 23:09:32 2008 +0300
24129 nand: FSL UPM NAND driver
24131 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24133 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
24134 Author: Kyungmin Park <kmpark@infradead.org>
24135 Date: Tue Jan 15 08:59:44 2008 +0900
24137 OneNAND: Separate U-Boot dependent code from OneNAND
24139 OneNAND: Separate U-Boot dependent code from OneNAND
24141 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
24143 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
24144 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24145 Date: Wed Jan 16 10:33:46 2008 +0100
24147 ppc4xx: Sequoia coding style cleanup and beautification
24149 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24151 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
24152 Author: Larry Johnson <lrj@acm.org>
24153 Date: Tue Jan 15 14:35:58 2008 -0500
24155 ppc4xx: Refactor ECC POST for AMCC Denali core
24157 The ECC POST reported intermittent failures running after power-up on
24158 the Korat PPC440EPx board. Even when the test passed, the debugging
24159 output occasionally reported additional unexpected ECC errors.
24161 This refactoring has three main objectives: (1) minimize the code
24162 executed with ECC enabled during the tests, (2) add more checking of the
24163 results so any unexpected ECC errors would cause the test to fail, and
24164 (3) use synchronization (only) where required by the processor.
24166 Signed-off-by: Larry Johnson <lrj@acm.org>
24168 commit 2465665b73ac2f688af945b1ed510752afa816a4
24169 Author: David Saada <David.Saada@ecitele.com>
24170 Date: Tue Jan 15 10:40:24 2008 +0200
24172 QE UEC: Extend number of supported UECs to 4
24174 This patch extends the number of supported UECs to 4. Note that the
24175 problem of QE thread resources exhaustion is resolved by setting the
24176 correct number of QE threads according to Ethernet type (GBE or FE).
24178 Signed-off-by: David Saada <david.saada@ecitele.com>
24179 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
24181 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
24182 Author: Wolfgang Denk <wd@denx.de>
24183 Date: Wed Jan 16 00:01:01 2008 +0100
24185 LWMON5: enable hush shell as command line parser
24187 Signed-off-by: Wolfgang Denk <wd@denx.de>
24189 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
24190 Author: Wolfgang Denk <wd@denx.de>
24191 Date: Tue Jan 15 17:22:28 2008 +0100
24193 ADS5121: disable watchdog; enable image timestamps
24195 Signed-off-by: Wolfgang Denk <wd@denx.de>
24197 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
24198 Author: Wolfgang Denk <wd@denx.de>
24199 Date: Tue Jan 15 17:21:28 2008 +0100
24201 TK885D: fixes for bigger flash sector sizes on new modules;
24202 adjust default environment;
24203 disable SCC ethernet (not used on this board).
24205 Signed-off-by: Wolfgang Denk <wd@denx.de>
24207 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
24208 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24209 Date: Tue Jan 15 17:48:13 2008 +0900
24211 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
24213 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24215 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
24216 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24217 Date: Tue Jan 15 23:25:25 2008 +0900
24219 sh: Add support SH7710/SH7712
24221 SH7710/SH7712 of SH3 CPU are supported.
24222 SH771X is called SH-Ether, and has the Ether controller in CPU.
24223 The driver of Ether is not included in this patch.
24225 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24227 commit 63a11be68306870e04d3851ed9fa41955cdf4894
24228 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24229 Date: Tue Jan 15 23:06:17 2008 +0900
24231 sh: Add support of map_physmem() and unmap_physmem() to SuperH
24233 This patch add the support of map_physmem() and unmap_physmem()
24234 used with Common Flash Interface(CFI) driver.
24236 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24238 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
24239 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24240 Date: Wed Jan 9 14:42:27 2008 +0900
24242 sh: Add maintainer of MS7720SE to the MAINTAINER file
24244 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24246 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
24247 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24248 Date: Wed Jan 9 14:39:58 2008 +0900
24250 sh: Fix board name in MS7720SE's config.mk
24252 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24254 commit c0a04d93734d768b39dbb72fb501b65614c8615d
24255 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24256 Date: Wed Jan 9 14:37:36 2008 +0900
24258 sh: Add MS7720SE to MAKEALL
24260 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24262 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
24263 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24264 Date: Mon Dec 3 22:58:50 2007 +0900
24266 sh: Add support for MS7720RP02 board
24268 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24269 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24270 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24272 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
24273 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24274 Date: Wed Jan 9 14:30:02 2008 +0900
24276 sh: Add support for SH7720 in serial_sh driver.
24278 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24279 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24280 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24282 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
24283 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24284 Date: Mon Dec 3 22:58:45 2007 +0900
24286 sh: Add support SH3 and SH7720
24288 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24289 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24290 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24292 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
24293 Author: Stefan Roese <sr@denx.de>
24294 Date: Tue Jan 15 10:11:02 2008 +0100
24296 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
24298 Signed-off-by: Stefan Roese <sr@denx.de>
24300 commit 17bef68097ab3692500a36fb31115bff7910aa99
24301 Author: Niklaus Giger <niklausgiger@gmx.ch>
24302 Date: Mon Jan 14 14:04:42 2008 +0100
24304 ppc_4xx: Fix post spr.c for PPC405
24306 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
24307 for PPC440 and derivates processor.
24309 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24311 commit 06c428bcd4413014b43236e77765022071424fa6
24312 Author: Dave Liu <r63238@freescale.com>
24313 Date: Mon Jan 14 11:12:01 2008 +0800
24315 QE: fix compile warning
24317 qe.c: In function 'qe_upload_firmware':
24318 qe.c:390: warning: pointer targets in passing argument 2
24319 uec.c: In function 'uec_initialize':
24320 uec.c:1236: warning: 'uec_info' may be used uninitialized
24322 Signed-off-by: Dave Liu <daveliu@freescale.com>
24324 commit a0dd99d51efa55fe023e19c97ead92683725eb11
24325 Author: Stefan Roese <sr@denx.de>
24326 Date: Mon Jan 14 10:05:05 2008 +0100
24328 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
24330 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
24331 to remove the USB PHY reset after powerup. The CPLD will keep the
24332 USB PHY in reset (active low) until the bit is set to 1 in
24333 board_early_init_f().
24335 Signed-off-by: Stefan Roese <sr@denx.de>
24337 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
24338 Author: Wolfgang Denk <wd@denx.de>
24339 Date: Sun Jan 13 23:26:45 2008 +0100
24341 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
24343 Signed-off-by: Wolfgang Denk <wd@denx.de>
24345 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
24346 Author: Wolfgang Denk <wd@denx.de>
24347 Date: Sun Jan 13 23:37:50 2008 +0100
24349 ADS5121: Fix typo in ads5121.c, adjust default environment
24351 Signed-off-by: Wolfgang Denk <wd@denx.de>
24353 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
24354 Author: John Rigby <jrigby@freescale.com>
24355 Date: Fri Aug 24 18:18:43 2007 -0600
24357 ADS5121: MAX slew rate for PATA pins
24359 Signed-off-by: John Rigby <jrigby@freescale.com>
24361 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
24362 Author: Wolfgang Denk <wd@denx.de>
24363 Date: Sun Jan 13 21:05:52 2008 +0100
24365 Fix Makefile dependency problem with parallel builds.
24367 Signed-off-by: Wolfgang Denk <wd@denx.de>
24369 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
24370 Author: Wolfgang Denk <wd@denx.de>
24371 Date: Sun Jan 13 19:51:39 2008 +0100
24373 MPC8544DS: fix board Makefile for silent build (with -s)
24375 Signed-off-by: Wolfgang Denk <wd@denx.de>
24377 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
24378 Author: Wolfgang Denk <wd@denx.de>
24379 Date: Sun Jan 13 16:44:08 2008 +0100
24381 PMC440 board: fix board Makefile for out-of-tree building
24383 Signed-off-by: Wolfgang Denk <wd@denx.de>
24385 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
24386 Author: Wolfgang Denk <wd@denx.de>
24387 Date: Sun Jan 13 16:07:44 2008 +0100
24389 Makalu: fix compile warning
24391 Signed-off-by: Wolfgang Denk <wd@denx.de>
24393 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
24394 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24395 Date: Sun Jan 13 12:36:12 2008 +0100
24397 cmd_nand : fix compiler warning.
24399 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24401 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
24402 Author: Michael Schwingen <rincewind@discworld.dascon.de>
24403 Date: Sat Jan 12 20:29:47 2008 +0100
24405 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
24407 Signed-off-by: Michael Schwingen <michael@schwingen.org>
24408 Acked-by: Stefan Roese <sr@denx.de>
24410 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
24411 Author: Wolfgang Denk <wd@denx.de>
24412 Date: Sun Jan 13 02:19:44 2008 +0100
24414 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
24416 Signed-off-by: Wolfgang Denk <wd@denx.de>
24418 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
24419 Author: Wolfgang Denk <wd@denx.de>
24420 Date: Sun Jan 13 02:19:13 2008 +0100
24422 MPC8xx FEC driver: fix compiler warning.
24424 Signed-off-by: Wolfgang Denk <wd@denx.de>
24426 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
24427 Author: Wolfgang Denk <wd@denx.de>
24428 Date: Sun Jan 13 00:59:21 2008 +0100
24430 Fix Makefile dependencies issues; allow silent build
24432 - get rid of "version" target whichdidn't really work
24433 - make autoconf.mk depend on version_autogenerated.h to make sure
24434 to rebuild files as needed
24435 - add XECHO macro to allow for silent build using "make -s"
24437 Signed-off-by: Wolfgang Denk <wd@denx.de>
24439 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
24440 Author: Wolfgang Denk <wd@denx.de>
24441 Date: Sun Jan 13 00:55:47 2008 +0100
24443 ADS5121e: fix compile warning
24445 Signed-off-by: Wolfgang Denk <wd@denx.de>
24447 commit f2b6f4610627fe3d607620e25082916a01538875
24448 Author: Wolfgang Denk <wd@denx.de>
24449 Date: Sun Jan 13 00:55:18 2008 +0100
24451 MUNICes: fix board Makefile for remote build directory
24453 Signed-off-by: Wolfgang Denk <wd@denx.de>
24455 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
24456 Author: Oliver Weber <almoeli@gmx.de>
24457 Date: Wed Jan 9 17:04:38 2008 +0100
24459 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
24461 Signed-off-by: Oliver Weber <almoeli@gmx.de>
24463 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
24464 Author: Andreas Engel <andreas.engel@ericsson.com>
24465 Date: Wed Jan 9 17:10:56 2008 +0100
24467 Make bootretry work when command line editing is enabled
24469 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
24470 This patch fixes the problem.
24472 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
24474 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
24475 Author: Larry Johnson <lrj@acm.org>
24476 Date: Fri Jan 11 23:26:18 2008 -0500
24478 Refactor code for "i2c sdram" command
24480 Signed-off-by: Larry Johnson <lrj@acm.org>
24482 commit 0df6b8446c4721b91ce311548114891130371083
24483 Author: Larry Johnson <lrj@acm.org>
24484 Date: Thu Jan 10 22:23:39 2008 -0500
24486 Fix "i2c sdram" command for DDR2 DIMMs
24488 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
24489 "i2c sdram" command. This patch provides correct alternative
24490 interpretations when DDR2 memory is detected.
24492 Signed-off-by: Larry Johnson <lrj@acm.org>
24494 commit 64134f011254123618798ff77c42ba196b2ec485
24495 Author: Wolfgang Denk <wd@denx.de>
24496 Date: Sat Jan 12 20:31:39 2008 +0100
24498 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
24500 With recent toolchain versions, some boards would not build because
24501 or errors like this one (here for ocotea board when building with
24503 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
24505 For many boards, the .bss section is big enough that it wraps around
24506 at the end of the address space (0xFFFFFFFF), so the problem will not
24507 be visible unless you use a 64 bit tool chain for development. On
24508 some boards however, changes to the code size (due to different
24509 optimizations) we bail out with section overlaps like above.
24511 The fix is to add the NOLOAD attribute to the .bss and .sbss
24512 sections, telling the linker that .bss does not consume any space in
24515 Signed-off-by: Wolfgang Denk <wd@denx.de>
24517 commit 3afac79ec27b91df185f090b31dad9620779f440
24518 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24519 Date: Fri Jan 11 20:42:58 2008 -0600
24521 USB: Add Philips 1561 PCI-OHCI ids
24522 (needed for M5475EVB)
24524 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24526 commit 5e8def6731cd7bec74bff42a16b139de04010353
24527 Author: Wolfgang Denk <wd@denx.de>
24528 Date: Sat Jan 12 15:51:34 2008 +0100
24530 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
24533 Signed-off-by: Heiko Schocher <hs@denx.de>
24534 Signed-off-by: Wolfgang Denk <wd@denx.de>
24536 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
24537 Author: Grzegorz Bernacki <gjb@semihalf.com>
24538 Date: Fri Jan 11 12:03:43 2008 +0100
24540 MPC512X: Cleanup bus clock names.
24542 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24544 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
24545 Author: Grzegorz Bernacki <gjb@semihalf.com>
24546 Date: Tue Jan 8 17:16:59 2008 +0100
24548 MPC512X: Fixed typo in macro name.
24550 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24552 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
24553 Author: Grzegorz Bernacki <gjb@semihalf.com>
24554 Date: Tue Jan 8 17:16:15 2008 +0100
24556 ads5121: Added support for FDT.
24558 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24560 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
24561 Author: Wolfgang Denk <wd@denx.de>
24562 Date: Sat Jan 12 01:05:50 2008 +0100
24564 Coding Style cleanup; update CHANGELOG.
24566 Signed-off-by: Wolfgang Denk <wd@denx.de>
24568 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
24569 Author: Heiko Schocher <hs@denx.de>
24570 Date: Fri Jan 11 15:15:17 2008 +0100
24572 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
24574 Signed-off-by: Timur Tabi <timur@freescale.com>
24575 Signed-off-by: Heiko Schocher <hs@denx.de>
24577 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
24578 Author: Heiko Schocher <hs@denx.de>
24579 Date: Fri Jan 11 15:15:16 2008 +0100
24581 MUNICes: Set the right CFG_DEFAULT_MBAR value.
24583 Signed-off-by: Heiko Schocher <hs@denx.de>
24585 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
24586 Author: Heiko Schocher <hs@denx.de>
24587 Date: Fri Jan 11 15:15:15 2008 +0100
24589 added the config File for the MUNICes board.
24591 Signed-off-by: Heiko Schocher <hs@denx.de>
24593 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
24594 Author: Heiko Schocher <hs@denx.de>
24595 Date: Fri Jan 11 15:15:14 2008 +0100
24597 added basic support for the MUNICes board.
24599 Signed-off-by: Heiko Schocher <hs@denx.de>
24601 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
24602 Author: Wolfgang Denk <wd@denx.de>
24603 Date: Sat Jan 12 00:39:37 2008 +0100
24605 Update CHANGELOG and MAINTAINERS files.
24607 Signed-off-by: Wolfgang Denk <wd@denx.de>
24609 commit 5ba7390c3cb579172be66888a371707b47b5be4e
24610 Author: Anatolij Gustschin <agust@denx.de>
24611 Date: Fri Jan 11 02:15:02 2008 +0100
24613 Fix compilation problem in common/cmd_bmp.c
24615 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
24616 isn't defined. This patch fix this.
24618 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24620 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
24621 Author: Heiko Schocher <hs@denx.de>
24622 Date: Fri Jan 11 01:12:09 2008 +0100
24624 Fix defaultconfig for the mgcoge board.
24626 Signed-off-by: Heiko Schocher <hs@denx.de>
24628 commit ac9db066b26935f31bff15c98168b19faeb603f3
24629 Author: Heiko Schocher <hs@denx.de>
24630 Date: Fri Jan 11 01:12:08 2008 +0100
24632 Added support for the mgcoge board from keymile.
24634 Signed-off-by: Heiko Schocher <hs@denx.de>
24636 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
24637 Author: Heiko Schocher <hs@denx.de>
24638 Date: Fri Jan 11 01:12:07 2008 +0100
24640 Enable SMC microcode relocation patch for SMC1.
24642 Signed-off-by: Heiko Schocher <hs@denx.de>
24644 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
24645 Author: Heiko Schocher <hs@denx.de>
24646 Date: Fri Jan 11 01:12:06 2008 +0100
24648 Added support for the mgsuvd board from keymile.
24650 Signed-off-by: Heiko Schocher <hs@denx.de>
24652 commit bf05293973b348f6946c9df92cd3c65ece42d0be
24653 Author: James Yang <james.yang@freescale.com>
24654 Date: Thu Jan 10 16:02:07 2008 -0600
24656 Fix 64-bit vsprintf.
24658 There were some size and unsigned problems.
24659 Also add support for "ll" size modifier in format string like glibc
24661 Signed-off-by: James Yang <James.Yang@freescale.com>
24662 Acked-by: Jon Loeliger <jdl@freescale.com>
24664 commit 92fa37eac530860643afa26ae347af3d23d67309
24665 Author: Larry Johnson <lrj@acm.org>
24666 Date: Wed Jan 9 12:42:35 2008 -0500
24668 Remove superfluous preprocessor conditionals from LM73 driver
24670 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
24672 (2) Use conditional Makefile.o.
24674 Signed-off-by: Larry Johnson <lrj@acm.org>
24676 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
24677 Author: Guennadi Liakhovetski <lg@denx.de>
24678 Date: Thu Jan 10 17:59:07 2008 +0100
24680 Add support for the TK885D baseboard from TELE-DATA
24682 The TK885D board uses a TQM885D module from TQ, this port adds an
24683 own configuration file and adds a last_stage_init() method to
24684 configure the two PHYs, depending on the phy_auto_nego environment
24687 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
24689 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
24690 Author: Kumar Gala <galak@kernel.crashing.org>
24691 Date: Thu Jan 10 02:22:05 2008 -0600
24693 Fix compiler warning
24695 main.c: In function 'readline_into_buffer':
24696 main.c:927: warning: unused variable 'p_buf'
24698 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24700 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
24701 Author: Anatolij Gustschin <agust@denx.de>
24702 Date: Fri Jan 11 14:30:01 2008 +0100
24704 Add Fujitsu CoralP/Lime video driver
24706 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24707 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
24709 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
24710 Author: Anatolij Gustschin <agust@denx.de>
24711 Date: Fri Jan 11 02:39:47 2008 +0100
24713 Fix video console newline and carriage return handling
24715 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
24716 are not displayed correctly. This is an attempt to fix
24717 this issue. Also add carriage return handling.
24719 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24720 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
24722 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
24723 Author: Stefan Roese <sr@denx.de>
24724 Date: Fri Jan 11 15:53:58 2008 +0100
24726 ppc4xx: Fix sdram init on Sequoia boards
24728 Clear possible errors in MCSR resulting from data-eye-search.
24729 If not done, then we could get an interrupt later on when
24730 exceptions are enabled.
24732 Signed-off-by: Stefan Roese <sr@denx.de>
24734 commit d610a60730b7464f6f659db49d264d89a7c71061
24735 Author: Anatolij Gustschin <agust@denx.de>
24736 Date: Fri Jan 11 15:31:09 2008 +0100
24738 ppc4xx: Rework Lime support for lwmon5
24740 Rework Lime support for lwmon5 using new video driver
24742 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24744 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
24745 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24746 Date: Fri Jan 11 14:55:16 2008 +0100
24748 ppc4xx: Update PMC440 config file
24750 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24752 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
24753 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24754 Date: Fri Jan 11 14:55:08 2008 +0100
24756 ppx4xx: Fix sdram init on PMC440 boards
24758 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24760 commit 061aad4d320dddce26247699dcf2875ee2ea1366
24761 Author: Dave Liu <r63238@freescale.com>
24762 Date: Thu Jan 10 23:09:33 2008 +0800
24764 mpc83xx: Fix the bug of 266MHz data rate DDR
24766 The DDR doesn't work on the 266MHz data rate,
24767 the patch fix the bug.
24769 Signed-off-by: Dave Liu <daveliu@freescale.com>
24770 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24772 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
24773 Author: Dave Liu <r63238@freescale.com>
24774 Date: Thu Jan 10 23:08:26 2008 +0800
24776 mpc83xx: Make the code more readable
24778 Format the code, make it more readable
24780 Signed-off-by: Dave Liu <daveliu@freescale.com>
24781 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24783 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
24784 Author: Dave Liu <r63238@freescale.com>
24785 Date: Thu Jan 10 23:07:23 2008 +0800
24787 mpc83xx: Reduce the latency of DDR
24789 Reduce the AL from 2 to 1 clock to improve the performance.
24791 Signed-off-by: Dave Liu <daveliu@freescale.com>
24792 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24794 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
24795 Author: Dave Liu <r63238@freescale.com>
24796 Date: Thu Jan 10 23:06:05 2008 +0800
24798 mpc83xx: Fix the wrong definition of MPC8315E
24800 According to the latest user manual of MPC8315E,
24801 1) The SVCOD of HRCWL is different than 837x
24802 2) The SCCR has changes
24804 Signed-off-by: Dave Liu <daveliu@freescale.com>
24805 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24807 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
24808 Author: Dave Liu <r63238@freescale.com>
24809 Date: Thu Jan 10 23:05:00 2008 +0800
24811 mpc83xx: Fix the typo in mpc83xx.h
24813 The SPCR about TSEC priority is wrong.
24815 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
24816 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
24817 Signed-off-by: Dave Liu <daveliu@freescale.com>
24818 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24820 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
24821 Author: Dave Liu <r63238@freescale.com>
24822 Date: Thu Jan 10 23:04:13 2008 +0800
24824 mpc83xx: Fix the typo in global data struct
24826 Fix the typo in global_data.h
24828 Signed-off-by: Dave Liu <daveliu@freescale.com>
24829 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24831 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
24832 Author: Dave Liu <r63238@freescale.com>
24833 Date: Thu Jan 10 23:03:03 2008 +0800
24835 mpc83xx: Remove cache config from config.h
24837 clean up the cache config from configs.h of board
24839 Signed-off-by: Dave Liu <daveliu@freescale.com>
24840 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24842 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
24843 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24844 Date: Wed Jan 9 20:57:47 2008 +0300
24846 mpc83xx: add support for the MPC8360E-RDK
24848 This is MPC8360E based board with:
24849 - 256MB fixed SDRAM;
24850 - 8MB Intel Strata NOR flash;
24851 - StMICRO 64MiB NAND flash;
24852 - two 10/100/1000 ethernet ports connected via Broadcom
24854 - two 10/100 ethernet ports connected via National
24856 - one PCI and one miniPCI slots;
24857 - four serial ports (two NS16550-compatible, two UCCs);
24858 - four USB ports working through MPC8360E "FHCI" USB controller;
24859 - Fujitsu MB86277 graphics controller;
24860 - Analog to Digital Converter/Touchscreen controller, AD7843
24863 Features not supported in this patch are:
24864 - StMICRO 64MiB NAND flash (patch sent);
24865 - MINT framebuffer initialization (patch is pending);
24866 - Fetching production information from the EEPROM via I2C;
24868 - Two slow UCCs used as RS-485 UARTs.
24870 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24871 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24873 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
24874 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24875 Date: Wed Jan 9 20:57:40 2008 +0300
24877 mpc83xx: add "fsl, qe" compatible fixups
24879 New device trees will use "fsl,qe" compatible properties.
24881 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24882 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24884 commit 977b57583a7c34010e566a09a679ec3c1836f996
24885 Author: Kim Phillips <kim.phillips@freescale.com>
24886 Date: Wed Jan 9 15:24:06 2008 -0600
24888 mpc83xx: add missing CONFIG_HAS_ETH0 defines
24890 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
24891 is defined; add the define to the missing board configs.
24893 Thanks to Emilian Medve for finding this.
24895 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24897 commit b830b7f1635984ba607219fcbd78597c28eeb529
24898 Author: Becky Bruce <bgill@freescale.com>
24899 Date: Thu Jan 10 14:00:28 2008 -0600
24901 86xx: Support 2GB DIMMs
24903 Configure the number of bits used to address the banks inside the SDRAM
24904 device. The default register value of 0 means 2 bits to address 4 banks.
24905 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
24907 Signed-off-by: Becky Bruce <bgill@freescale.com>
24909 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
24910 Author: Niklaus Giger <niklausgiger@gmx.ch>
24911 Date: Thu Jan 10 18:50:33 2008 +0100
24913 ppc4xx: Make Sequoia boot vxWorks
24916 TLB 0 a entry for the Machine Check interrupt
24917 TLB 1 a entry for the RAM
24918 TLB 2 a entry for the EBC
24919 TLB 3 a entry for the boot flash
24921 After changing the baudrate to 9600 I had no problems to boot the
24922 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
24925 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24927 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
24928 Author: Larry Johnson <lrj@arlinx.com>
24929 Date: Wed Jan 9 23:10:27 2008 -0500
24931 ppc4xx: Fix dflush() to restore DVLIM register
24933 Signed-off-by: Larry Johnson <lrj@acm.org>
24935 commit 252f60b068d1f94190b5bcfda169db582387e15e
24936 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24937 Date: Thu Jan 10 03:52:44 2008 -0500
24939 Nios2: remove common/cmd_bdinfo.c unused variable.
24941 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24942 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
24944 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
24945 Author: Ben Warren <biggerbadderben@gmail.com>
24946 Date: Wed Jan 9 18:15:53 2008 -0500
24948 Fix Ethernet init() return codes
24950 Change return values of init() functions in all Ethernet drivers to conform
24956 All drivers going forward should return 0 on success. Current drivers that
24957 return 1 on success were left as-is to minimize changes.
24959 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
24960 Acked-by: Stefan Roese <sr@denx.de>
24961 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24962 Acked-by: Kim Phillips <kim.phillips@freescale.com>
24963 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24964 Acked-By: Timur Tabi <timur@freescale.com>
24966 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
24967 Author: Wolfgang Denk <wd@denx.de>
24968 Date: Thu Jan 10 00:55:14 2008 +0100
24970 Coding Style cleanup; update CHANGELOG
24972 Signed-off-by: Wolfgang Denk <wd@denx.de>
24974 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
24975 Author: Kim Phillips <kim.phillips@freescale.com>
24976 Date: Wed Jan 9 16:56:54 2008 -0600
24978 Add QE brg freq and correct qe bus freq fdt update code
24980 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24981 Signed-off-by: Andy Fleming <afleming@freescale.com>
24983 commit 890dfef06c2d169a3356359596890754dfb8ee1c
24984 Author: Andy Fleming <afleming@freescale.com>
24985 Date: Wed Jan 9 16:34:51 2008 -0600
24987 Remove cache config from ATUM8548 and sbc8548 configs
24989 These boards weren't updated by Kumar's config patch because they
24990 weren't in the tree, yet.
24992 Signed-off-by: Andy Fleming <afleming@freescale.com>
24994 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
24995 Author: Timur Tabi <timur@freescale.com>
24996 Date: Mon Jan 7 13:31:19 2008 -0600
24998 85xx: add ability to upload QE firmware
25000 Define the layout of a binary blob that contains a QE firmware and instructions
25001 on how to upload it. Add function qe_upload_firmware() to parse the blob and
25002 perform the actual upload. Add command-line command "qe fw" to take a firmware
25003 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
25004 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
25005 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
25007 Signed-off-by: Timur Tabi <timur@freescale.com>
25009 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
25010 Author: Kumar Gala <galak@kernel.crashing.org>
25011 Date: Tue Jan 8 01:22:21 2008 -0600
25013 85xx: Remove cache config from configs.h
25015 Either use the standard defines in asm/cache.h or grab the information
25016 at runtime from the L1CFG SPR.
25018 Also, minor cleanup in cache.h to make the code a bit more readable.
25020 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25022 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
25023 Author: robert lazarski <robertlazarski@gmail.com>
25024 Date: Fri Dec 21 10:39:27 2007 -0500
25026 mpc85xx: Add support for ATUM8548 (updated)
25028 Add support for Instituto Atlantico's ATUM8548 board
25030 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
25031 Signed-off-by: Andy Fleming <afleming@freescale.com>
25033 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
25034 Author: robert lazarski <robertlazarski@gmail.com>
25035 Date: Fri Dec 21 10:36:37 2007 -0500
25037 mpc85xx: Add support for ATUM8548 (updated)
25039 Add support for Instituto Atlantico's ATUM8548 board
25041 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
25043 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
25044 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
25045 Date: Thu Dec 13 06:45:14 2007 -0600
25047 mpc85xx: Add support for SBC8548 (updated)
25049 Add support for Wind River's SBC8548 reference board.
25051 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
25053 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
25054 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
25055 Date: Thu Dec 13 06:45:08 2007 -0600
25057 mpc85xx: Add support for SBC8548 (updated)
25059 Add support for Wind River's SBC8548 reference board.
25061 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
25062 Signed-off by: Andy Fleming <afleming@freescale.com>
25064 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
25065 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
25066 Date: Mon Oct 22 19:58:19 2007 +0400
25068 MPC8568E-MDS: set up QE pario for UART1
25070 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
25071 be set up appropriately.
25073 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
25075 commit ad162249cb371e9e38971676f09be791e5f3cf4a
25076 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
25077 Date: Mon Oct 22 18:12:46 2007 +0400
25079 MPC8568E-MDS: reset UCCs to use them reliably
25081 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
25084 p.s Similar code exists in the Linux kernel board file (for capability
25085 reasons with older U-Boots), but should be removed some day.
25087 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
25089 commit 2146cf56821c3364786ca94a7306008c5824b238
25090 Author: Kumar Gala <galak@kernel.crashing.org>
25091 Date: Wed Dec 19 01:18:15 2007 -0600
25093 Reworked FSL Book-E TLB macros to be more readable
25095 The old macros made it difficult to know what WIMGE and perm bits
25096 were set for a TLB entry. Actually use the bit masks for these items
25097 since they are only a single bit.
25099 Also moved the macros into mmu.h out of e500.h since they aren't specific
25102 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25104 commit 1d47273d46925929f8f2c1913cd96d7257aade88
25105 Author: Kumar Gala <galak@kernel.crashing.org>
25106 Date: Tue Dec 18 23:21:51 2007 -0600
25108 Use FSL Book-E MMU macros from Linux Kernel
25110 Grab the FSL Book-E MAS register macros from Linux. Also added
25111 defines for page sizes up to 4TB and removed SHAREN since it doesnt
25114 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25116 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
25117 Author: Andy Fleming <afleming@freescale.com>
25118 Date: Wed Jan 9 13:51:32 2008 -0600
25120 Fix my own merge stupidity
25122 Way back in August I merged Heiko's patch:
25123 566a494f592: [PCS440EP] upgrade the PCS440EP board
25125 with Jon's CONFIG_COMMANDS patches.
25127 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
25129 However, in the process, I left out some of Heiko's good changes.
25131 Now Heiko's and Jon's patches are properly merged in fat_register_device()
25133 Signed-off-by: Andy Fleming <afleming@freescale.com>
25135 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
25136 Author: James Yang <James.Yang@freescale.com>
25137 Date: Wed Jan 9 11:17:49 2008 -0600
25139 Expose parse_line() globally.
25141 Add new function readline_into_buffer() that allows the
25142 output of readline to be put into a pointer to char buffer.
25144 This refactoring allows other functions besides the
25145 main command loop to also use the same input mechanism.
25147 Signed-off-by: James Yang <James.Yang@freescale.com>
25148 Acked-by: Jon Loeliger <jdl@freescale.com>
25150 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
25151 Author: Guennadi Liakhovetski <lg@denx.de>
25152 Date: Wed Jan 9 01:15:25 2008 +0100
25154 trivial: fix consequences of a bad merge
25156 Fix what looks like a merge artifact.
25158 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25160 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
25161 Author: Zhang Wei <wei.zhang@freescale.com>
25162 Date: Thu Jan 3 10:51:15 2008 +0800
25164 Add Ctrl combo key support to usb keyboard driver.
25166 Ctrl combo key support is added, which is very useful to input Ctrl-C
25167 for interrupt current job.
25168 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
25169 key input when tstc() is called.
25171 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
25173 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
25174 Author: Marcel Ziswiler <marcel@ziswiler.com>
25175 Date: Sun Dec 30 03:30:56 2007 +0100
25177 fix various comments
25179 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25181 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
25182 Author: Marcel Ziswiler <marcel@ziswiler.com>
25183 Date: Sun Dec 30 03:30:46 2007 +0100
25185 fix comments with new drivers organization
25187 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25189 commit a9b410dc7d2a4721c408b13abfc037988150f145
25190 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25191 Date: Fri Dec 28 12:50:59 2007 +0900
25193 Remove the obsolete terse version of do_mii()
25195 We now have more useful version of do_mii() and everybody use it.
25196 Gerald Van Baren says:
25198 > When I originally wrote the mii command 6(!) years ago, I wrote a
25199 > verbose version that printed human readable decomposition of the flags,
25200 > etc., and a terse one that didn't print as much stuff and thus had a
25201 > smaller memory footprint.
25203 > It sounds like the terse version has withered and died, apparently
25204 > people are only using the verbose version (which is very understandable,
25207 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25208 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25210 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
25211 Author: Mike Frysinger <vapier@gentoo.org>
25212 Date: Thu Dec 27 13:42:56 2007 -0500
25214 Do not reference sha1.c when building mkimage.
25216 remove sha1.o from mkimage linking since it isn't actually used.
25218 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
25220 commit b9173af73e524d37c812f210173cf83385c5171a
25221 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25222 Date: Thu Dec 27 15:39:54 2007 +0900
25224 common/cmd_mii.c: Add sanity argc check
25226 If type mii command without arguments, we suffer from uninitialized argv[]
25227 entries; for example we MIPS get stuck by TLB error.
25229 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25231 commit 500856eb1707ed17d9204baa61dd59948d3b2899
25232 Author: Rafal Jaworowski <raj@semihalf.com>
25233 Date: Wed Jan 9 19:39:36 2008 +0100
25235 API for external applications.
25237 This is an API for external (standalone) applications running on top of
25238 U-Boot, and is meant to be more extensible and robust than the existing
25239 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
25242 Included is the demo application using this new framework (api_examples).
25244 Please note this is still an experimental feature, and is turned off by
25247 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
25249 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
25250 Author: Jon Loeliger <jdl@freescale.com>
25251 Date: Wed Jan 9 12:14:55 2008 -0600
25253 86xx: Remove cache config from configs.h
25255 Just use the standard defines in asm/cache.h.
25257 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25259 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
25260 Author: Rafal Jaworowski <raj@semihalf.com>
25261 Date: Wed Jan 9 18:05:27 2008 +0100
25263 Globalize envmatch()
25265 The newly introduced API (routines related to env vars) will need to call
25268 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
25270 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
25271 Author: Jon Loeliger <jdl@freescale.com>
25272 Date: Fri Jan 4 12:07:27 2008 -0600
25274 Convert MPC8610HPCD to use libfdt.
25276 Assumes the presence of the aliases node in the DTS to
25277 locate the pci and serial nodes for fixups.
25279 Use consistent fdtaddr and fdtfile in environment variables.
25281 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25283 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
25284 Author: Jon Loeliger <jdl@freescale.com>
25285 Date: Fri Jan 4 11:58:23 2008 -0600
25287 8610: Fix lingering compile warnings.
25291 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25293 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
25294 Author: Wolfgang Denk <wd@denx.de>
25295 Date: Wed Jan 9 15:14:46 2008 +0100
25297 Coding Style cleanup, update CHANGELOG
25299 Signed-off-by: Wolfgang Denk <wd@denx.de>
25301 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
25302 Author: Mike Frysinger <vapier@gentoo.org>
25303 Date: Tue Dec 18 04:29:55 2007 -0500
25305 fix easylogo on big endian dev systems
25307 didnt realize how out of shape easylogo actually was until i tried using it.
25308 this patch does byte swapping as need be on the input tga header since the tga
25309 is in little endian but the host could just as well be big endian. i didnt
25310 bother using bswap macros or such stuff from system headers as nothing in
25311 POSIX dictates byte swapping functionality.
25313 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
25315 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
25316 Author: Mike Frysinger <vapier@gentoo.org>
25317 Date: Tue Dec 18 03:23:25 2007 -0500
25321 - make the Makefile not suck
25322 - include proper headers for prototypes
25323 - fix obvious broken handling of strchr() when handling '.' in filenames
25325 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
25327 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
25328 Author: raptorbrino@aim.com <raptorbrino@aim.com>
25329 Date: Thu Dec 13 21:23:28 2007 -0500
25331 Fix build problems under Cygwin
25333 This patch allows u-boot to build without error in a cygwin
25334 environment. Cygwin does not define __u64 in it's
25335 include/asm/types.h file. The -idirafter flag in the u-boot
25336 build causes the inclusion of the cygwin types.h file as opposed
25337 to u-bot/include/asm/types.h file which does define __u64.
25338 Subsequently, sha1.c compile fails due to unknown symbol.
25340 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
25342 commit 43ef1c381f9195504a2488f5cb909227eb97d475
25343 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
25344 Date: Fri Nov 30 17:29:59 2007 +0100
25346 cmd_bmp: Add support for displaying gzip compressed bmps
25348 The existing code can show information about a gzip compressed BMP
25349 image, but can't actually display it.
25351 Therefore, move the decompression code out of bmp_info() and use it in
25352 bmp_display() as well in order to display a compressed BMP image.
25354 Also, clean things up a bit and fix a memory leak while we're at it.
25356 [hskinnemoen@atmel.com: a bit of refactoring]
25357 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
25359 commit d197ffd8172c6fdef38733424640a9a47295d6e9
25360 Author: Guennadi Liakhovetski <lg@denx.de>
25361 Date: Thu Nov 29 21:15:56 2007 +0100
25363 Fix and optimize MII operations on FEC (MPC8xx) controllers
25365 This patch fixes several issues at least on a MPC885 based system with two
25366 FEC interfaces used in MII mode.
25368 1. PHY discovery should first read PHY_PHYIDR2 register and only then
25369 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
25370 otherwise the values read are wrong. Also notice, that PHY discovery
25371 cannot work on MPC88x / MPC87x in setups with both FECs active at all
25372 in its present form, because for both interfaces the registers from FEC
25373 1 are used to communicate over MII.
25375 2. Remove code duplication for resetting the FEC by isolating it into a
25378 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
25380 4. Optimize mii_init() to only reset the FEC 1 controller once.
25382 5. Fix a typo in mii_init() using index i instead of j thus potentially
25383 leading to unpredictable results.
25385 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25387 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
25388 Author: Guennadi Liakhovetski <lg@denx.de>
25389 Date: Tue Nov 20 13:14:20 2007 +0100
25391 Fix endianness conversions in rtl8169 driver
25393 It is unclear on what platforms this driver has been tested, since
25394 noone up to now defines CONFIG_RTL8169 in the board configuration
25395 header. Now it has been fixed for a big-endian mpc8241 based
25396 linkstation platform. This patch presents the necessary endianness
25399 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25401 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
25402 Author: Zhang Wei <wei.zhang@freescale.com>
25403 Date: Thu Jan 3 10:51:15 2008 +0800
25405 Add Ctrl combo key support to usb keyboard driver.
25407 Ctrl combo key support is added, which is very useful to input Ctrl-C
25408 for interrupt current job.
25409 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
25410 key input when tstc() is called.
25412 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
25413 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25415 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
25416 Author: Wolfgang Denk <wd@denx.de>
25417 Date: Wed Jan 9 13:43:38 2008 +0100
25419 Coding Style clenaup; update CHANGELOG
25421 Signed-off-by: Wolfgang Denk <wd@denx.de>
25423 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
25424 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25425 Date: Thu Dec 27 17:13:11 2007 +0100
25427 Remove bit swapping in Xilinx Spartan bitfile loading
25429 This patch removes the unnecessary bit swapping when
25430 booting .bit files with the 'fpga loadb' command.
25432 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25434 commit 437fc7327f0611f82937858f2d80e4cd61b40984
25435 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25436 Date: Thu Dec 27 17:13:05 2007 +0100
25438 Fix MSB check in Xilinx Spartan slave serial mode
25440 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25442 commit 3bff4ffa33729a42645e328a21e8d16488872958
25443 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25444 Date: Thu Dec 27 17:12:56 2007 +0100
25446 Add new Xilinx Spartan FPGA types
25448 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25450 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
25451 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25452 Date: Thu Dec 27 17:12:43 2007 +0100
25454 Add pre and post configuration callbacks for Spartan FPGAs
25456 This patch adds a post configuration callback for Spartan2/3 FPGAs.
25457 pre and post configuration callback are now optional and
25458 not called when the function pointer is set to NULL.
25460 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25462 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
25463 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25464 Date: Thu Dec 27 17:12:34 2007 +0100
25466 Improve configuration of FPGA subsystem
25468 This patch removes the FPGA subsystem configuration through
25469 the CONFIG_FPGA bitmask configuration option.
25471 See README for the new options:
25474 CONFIG_FPGA_<vendor>,
25475 CONFIG_FPGA_<family>
25477 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25479 commit 95c6bc7d4a3588b452baca610f8c795a83630477
25480 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25481 Date: Thu Dec 27 16:55:17 2007 +0100
25483 Add Epson RX8025 RTC support
25485 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25487 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
25488 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25489 Date: Thu Dec 27 16:57:23 2007 +0100
25491 serial: Make default_serial_console() a weak function
25493 With this patch it is possible to reimplement default_serial_console()
25494 in board specific code. This will be done in the upcomming PMC440
25495 U-Boot port. This also allows the lwmon board maintainer to
25496 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
25498 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25500 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
25501 Author: Harald Welte <laforge@openmoko.org>
25502 Date: Wed Dec 19 14:14:47 2007 +0100
25504 add 'terminal program' functionality
25506 This patch adds a 'cu' like serial terminal command to u-boot
25507 using which you can access other serial ports from the system console.
25509 OpenMoko uses this in their Neo1973 phones to get access to the GSM
25510 Modem and GPS chip from the bootloader.
25512 Signed-off-by: Harald Welte <laforge@openmoko.org>
25514 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
25515 Author: Harald Welte <laforge@openmoko.org>
25516 Date: Wed Dec 19 14:12:53 2007 +0100
25518 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
25519 that used to exist with the legacy NAND code
25521 Signed-off-by: Harald Welte <laforge@openmoko.org>
25523 commit f540c42d9564854b19ce9bbb70affe172529fe70
25524 Author: Harald Welte <laforge@openmoko.org>
25525 Date: Wed Dec 19 14:09:58 2007 +0100
25527 Fix building with CRAMFS but not JFFS2 support
25529 Signed-off-by: Harald Welte <laforge@openmoko.org>
25531 commit 23d0baf967fecdaf1804f045f6339337c5607eec
25532 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25533 Date: Sat Dec 22 15:52:58 2007 +0100
25535 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
25537 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
25538 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25540 commit 23776ff292966a85d811126933830bed48211826
25541 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25542 Date: Tue Dec 11 10:53:12 2007 +0100
25544 ARM: support board-specific ethernet PHY init
25546 Add until the new phylib will be arrived
25548 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25550 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
25551 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25552 Date: Sat Dec 8 16:34:08 2007 +0100
25554 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
25556 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25558 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
25559 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25560 Date: Sun Dec 9 11:01:10 2007 +0100
25562 Add missing file in gitignore and comments
25564 based on Linux source tree's .gitignore files
25566 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25568 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
25569 Author: Wolfgang Denk <wd@denx.de>
25570 Date: Wed Jan 9 11:36:21 2008 +0100
25572 Coding Style cleanup, update CHANGELOG
25574 Signed-off-by: Wolfgang Denk <wd@denx.de>
25576 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
25577 Author: Stefan Roese <sr@denx.de>
25578 Date: Wed Jan 9 10:38:58 2008 +0100
25580 POST: Execute SPR test after relocation
25582 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
25583 self modifying code and this doesn't work with stack in d-cache, since
25584 I can't move the code from d-cache to i-cache. We move the SPR test to
25585 be executed a little later, after relocation. Then stack is located in
25586 SDRAM and this self-modifying code is no problem anymore.
25588 Signed-off-by: Stefan Roese <sr@denx.de>
25590 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
25591 Author: Stefan Roese <sr@denx.de>
25592 Date: Wed Jan 9 10:28:20 2008 +0100
25594 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
25596 This patch configures the LWMON5 port to use d-cache as init-ram and
25597 the unused GPT0_COMP6 as POST WORD storage.
25599 Signed-off-by: Stefan Roese <sr@denx.de>
25601 commit 1754f50b710194f886b6f2831803d8960171a14d
25602 Author: Stefan Roese <sr@denx.de>
25603 Date: Wed Jan 9 10:25:46 2008 +0100
25605 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
25607 The privious 4xx POST implementation only supported storing the POST
25608 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
25609 we need to store the POST WORD in some other non volatile location.
25610 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
25613 Signed-off-by: Stefan Roese <sr@denx.de>
25615 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
25616 Author: Stefan Roese <sr@denx.de>
25617 Date: Wed Jan 9 10:23:16 2008 +0100
25619 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
25621 This patch adds support for locking the init-ram/stack in d-cache,
25622 so that other regions may use d-cache as well
25624 Note, that this current implementation locks exactly 4k of d-cache,
25625 so please make sure that you don't define a bigger init-ram area. Take
25626 a look at the lwmon5 440EPx implementation as a reference.
25628 Signed-off-by: Stefan Roese <sr@denx.de>
25630 commit 0ddb89601a8d29e808db450366752ffdc6267c53
25631 Author: Wolfgang Denk <wd@denx.de>
25632 Date: Wed Jan 9 10:16:33 2008 +0100
25634 Fix memset bug in ext2fs_read_file()
25636 ext2fs_read_file() had the function arguments swapped.
25638 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
25640 Signed-off-by: Wolfgang Denk <wd@denx.de>
25642 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
25643 Author: Markus Klotzbücher <mk@denx.de>
25644 Date: Tue Jan 5 08:17:15 1988 +0100
25646 Fix problems with usb storage devices on MPC5200 /TQM5200
25648 The MPC5200 OHCI controller operates in big endian, so
25649 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
25651 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25653 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
25654 Author: Wolfgang Denk <wd@denx.de>
25655 Date: Tue Jan 8 22:58:27 2008 +0100
25657 Fix compile problem with new env code.
25659 Signed-off-by: Wolfgang Denk <wd@denx.de>
25661 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
25662 Author: Markus Klotzbücher <mk@denx.de>
25663 Date: Tue Nov 27 10:23:20 2007 +0100
25665 tools: fix fw_printenv tool to compile again
25667 This patch updates the fw_printenv/fw_setenv userspace tool to include
25668 the correct MTD header in order to compile against current kernel
25669 headers. Backward compatibility is preserved by introducing an option
25670 MTD_VERSION which can be set to "old" for compilation using the old MTD
25671 headers. Along with this a number of warnings are fixed.
25673 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25675 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
25676 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25677 Date: Tue Jan 8 15:40:09 2008 +0100
25679 ppc4xx: assign PCI interrupts on seuqoia boards
25681 Some operating systems rely on assigned PCI interrupts.
25683 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25685 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
25686 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25687 Date: Tue Jan 8 15:50:49 2008 +0100
25689 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
25691 This patch allows the use of 4xx interrupt vector number defines
25692 in board specific code outside cpu/ppc4xx.
25694 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25696 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
25697 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25698 Date: Tue Jan 8 15:39:01 2008 +0100
25700 ppc4xx: Fix UIC2 vector number base
25702 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25704 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
25705 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25706 Date: Tue Jan 8 12:49:58 2008 +0100
25708 ppc4xx: Update PLB/PCI divider for PMC440 board
25710 This patch updates the PLB/PCI divider when running at
25711 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
25713 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25715 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
25716 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25717 Date: Tue Jan 8 11:13:09 2008 +0100
25719 ppc4xx: Disable error message when no NAND chip is installed on PMC440
25721 Add CFG_NAND_QUIET_TEST option to disable error message when
25722 no NAND chip is installed on PMC440 boards.
25724 Disable a couple of config defines that are only used for NAND_U_BOOT.
25726 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25728 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
25729 Author: Wolfgang Denk <wd@denx.de>
25730 Date: Tue Jan 8 22:58:27 2008 +0100
25732 Fix compile problem with new env code.
25734 Signed-off-by: Wolfgang Denk <wd@denx.de>
25736 commit 6de66b35426312a21174a9bf0576a094e2904bea
25737 Author: Markus Klotzbücher <mk@denx.de>
25738 Date: Tue Nov 27 10:23:20 2007 +0100
25740 tools: fix fw_printenv tool to compile again
25742 This patch updates the fw_printenv/fw_setenv userspace tool to include
25743 the correct MTD header in order to compile against current kernel
25744 headers. Backward compatibility is preserved by introducing an option
25745 MTD_VERSION which can be set to "old" for compilation using the old MTD
25746 headers. Along with this a number of warnings are fixed.
25748 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25750 commit ad3006fe7e84667021753b74247b0bafd97ba35f
25751 Author: Gerald Van Baren <vanbaren@cideas.com>
25752 Date: Mon Jan 7 23:47:32 2008 -0500
25754 LIBFDT: use memmove() instead of memcpy()
25756 This is partial patch from the DTC/libfdt
25757 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
25758 Author: David Gibson <david@gibson.dropbear.id.au>
25759 Date: Wed Nov 21 11:56:14 2007 +1100
25761 The patch also fixes one genuine bug caught by valgrind -
25762 _packblocks() in fdt_rw.c was using memcpy() where it should have been
25765 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25767 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
25768 Author: David Gibson <david@gibson.dropbear.id.au>
25769 Date: Mon Dec 17 14:42:07 2007 +1100
25771 libfdt: Add more documentation (patch the seventh)
25773 This patch adds more documenting comments to libfdt.h. Specifically,
25774 these document the read/write functions (not including fdt_open_into()
25775 and fdt_pack(), for now).
25777 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
25779 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
25780 Author: David Gibson <david@gibson.dropbear.id.au>
25781 Date: Mon Dec 17 14:41:52 2007 +1100
25783 libfdt: Add more documentation (patch the sixth)
25785 This patch adds some more documenting comments to libfdt.h.
25786 Specifically this documents all the write-in-place functions.
25788 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
25790 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
25791 Author: Gerald Van Baren <vanbaren@cideas.com>
25792 Date: Sat Dec 29 22:45:27 2007 -0500
25794 Fine grained per property /chosen updating.
25796 Implement a suggestion by Scott Wood to make the /chosen handling fine
25797 grained. Don't overwrite pre-existing properties on a per-property basis,
25798 so if /chosen exists but a necessary /chosen/property doesn't, it gets
25799 created. If a /chosen property exists, it is NOT overwritten unless the
25800 "force" flag is true.
25802 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25804 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
25805 Author: Gerald Van Baren <vanbaren@cideas.com>
25806 Date: Sat Jan 5 15:33:29 2008 -0500
25808 Improve the FDT help message.
25810 Add a note that "fdt copy" makes the new address active.
25811 Remove most of the extra hints at the end of the fdt help.
25813 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25815 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
25816 Author: Gerald Van Baren <vanbaren@cideas.com>
25817 Date: Sat Jan 5 14:52:04 2008 -0500
25819 Support setting FDT properties with optional values.
25821 Fix a bug found and documented by Bartlomiej Sieka where the optional
25822 value on "fdt set <path> <prop> [<val>]" wasn't optional.
25824 => fdt mknode / testnode
25825 => fdt print /testnode
25828 => fdt set /testnode testprop
25829 => fdt print /testnode
25834 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25836 commit 22fb2246df91bfc840d87f0c5910818bad55577a
25837 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25838 Date: Fri Dec 28 11:56:30 2007 +0100
25840 Add fdt_find_and_setprop() to fdt_support.h
25842 fdt_find_and_setprop() is used by several 4xx boards and it's
25843 missing in the appropriate header. This patch eliminates a
25844 warning when building U-Boot for such boards.
25846 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25847 Acked-by: Stefan Roese <sr@denx.de>
25849 commit 802b769bac17b0560d3535a42c502469ee190cd1
25850 Author: Stefan Roese <sr@denx.de>
25851 Date: Tue Jan 8 18:39:30 2008 +0100
25853 ppc4xx: Return 0 on success in 4xx ethernet driver
25855 Signed-off-by: Stefan Roese <sr@denx.de>
25857 commit 6775c68683a53c7abc778774641aac6f833a2cbf
25858 Author: Kim Phillips <kim.phillips@freescale.com>
25859 Date: Tue Jan 8 09:59:49 2008 -0600
25861 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
25863 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25865 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
25866 Author: Kim Phillips <kim.phillips@freescale.com>
25867 Date: Thu Dec 20 16:28:34 2007 -0600
25869 mpc83xx: rm remaining FLAT_TREE code
25871 ..in board pci.c files
25873 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25875 commit b3458d2cd55d01732e30a76d898afd99e871cd67
25876 Author: Kim Phillips <kim.phillips@freescale.com>
25877 Date: Thu Dec 20 15:57:28 2007 -0600
25879 mpc83xx: remove FLAT_TREE code
25881 need to rm it from pci code, too!
25883 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25885 commit 5b8bc606c61456566af6912f818a153b6b06f242
25886 Author: Kim Phillips <kim.phillips@freescale.com>
25887 Date: Thu Dec 20 14:09:22 2007 -0600
25889 mpc83xx: convert to using do_fixup_*()
25891 convert to using simpler mpc85xx style fdt update code; streamline by
25892 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
25893 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
25894 converted over to using libfdt).
25896 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25898 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
25899 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25900 Date: Thu Dec 20 12:58:51 2007 -0500
25902 sbc8349: enable libfdt by default on WRS SBC8349 board.
25904 Make libfdt the default for the WRS SBC8349 board.
25905 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
25906 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
25908 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25910 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
25911 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25912 Date: Thu Dec 20 12:58:16 2007 -0500
25914 sbc8349: migrate board to libfdt
25916 This adds libfdt support code for the Wind River sbc8349 board.
25918 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
25919 the other Freescale 83xx boards.
25921 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25923 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
25924 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25925 Date: Thu Dec 20 12:56:19 2007 -0500
25927 sbc8349: Remove board specific ECC code
25929 ECC code is now shared for all 83xx boards, so remove board specific one.
25930 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
25932 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25934 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
25935 Author: Kim Phillips <kim.phillips@freescale.com>
25936 Date: Thu Dec 20 01:30:48 2007 -0600
25938 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
25940 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
25942 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25944 commit ccf21c311e68d48399eff1e72936052885f6e3f7
25945 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25946 Date: Thu Dec 6 16:43:40 2007 +0100
25948 Add support CONFIG_UEC_ETH3 in MPC83xx
25950 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25952 commit e6af9932d31171e35db880e7b2f29f903b1b7660
25953 Author: Kumar Gala <galak@kernel.crashing.org>
25954 Date: Mon Nov 26 11:00:54 2007 -0600
25956 Remove CONFIG options related to OF that we dont use
25958 The MPC8360E MDS config defined:
25960 CONFIG_OF_HAS_UBOOT_ENV
25962 Which we don't use or ever needed. This seems like copy-paste feature creep.
25964 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25966 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
25967 Author: Kim Phillips <kim.phillips@freescale.com>
25968 Date: Mon Dec 10 14:16:22 2007 -0600
25970 mpc83xx: supress compiler warning
25972 mpc8360emds.c: In function ‘ft_board_setup’:
25973 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
25974 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
25976 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25978 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
25979 Author: Kim Phillips <kim.phillips@freescale.com>
25980 Date: Tue Nov 27 14:17:29 2007 -0600
25982 mpc83xx: fix remaining fdt_find_node_by_path references
25984 rename to fdt_path_offset
25986 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25988 commit 921d4b19ad1be704df58725485d9292dc0414adf
25989 Author: Kim Phillips <kim.phillips@freescale.com>
25990 Date: Mon Nov 19 12:30:09 2007 -0600
25992 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
25994 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
25995 This change guarantees that the environment will be located on the
25996 first flash sector after the U-Boot image.
25998 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26000 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
26001 Author: Kim Phillips <kim.phillips@freescale.com>
26002 Date: Fri Nov 9 14:28:08 2007 -0600
26004 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
26006 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
26007 properties in the device tree so the PHY gets configured for internal delay on
26008 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
26010 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26012 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
26013 Author: Dave Liu <r63238@freescale.com>
26014 Date: Tue Sep 18 12:41:15 2007 +0800
26016 mpc83xx: update the CREDITS and MAINTAINERS
26018 update the CREDITS and MAINTAINERS.
26020 Signed-off-by: Dave Liu <daveliu@freescale.com>
26022 commit b21add4b42af7b767448251b599b91066a160e0d
26023 Author: Dave Liu <r63238@freescale.com>
26024 Date: Tue Sep 18 12:40:21 2007 +0800
26026 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
26028 Add the MAINTAINER and MAKEALL entries for mpc837xemds
26030 Signed-off-by: Dave Liu <daveliu@freescale.com>
26032 commit f8900ce9094c462355eb792eea264ff16ac8fd16
26033 Author: Dave Liu <r63238@freescale.com>
26034 Date: Tue Sep 18 12:38:53 2007 +0800
26036 mpc83xx: Add the MPC837xEMDS board readme
26038 Add the README.mpc837xemds to /doc
26040 Signed-off-by: Dave Liu <daveliu@freescale.com>
26042 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
26043 Author: Dave Liu <r63238@freescale.com>
26044 Date: Tue Sep 18 12:37:57 2007 +0800
26046 mpc83xx: Add the support of MPC837xEMDS board
26048 The MPC837xEMDS board support:
26049 * DDR2 400MHz hardcoded and SPD init
26050 * Local bus NOR Flash
26051 * I2C, UART, MII and RTC
26055 Signed-off-by: Dave Liu <daveliu@freescale.com>
26057 commit 555da61702771fe0f76f3de23b4e7590f3704161
26058 Author: Dave Liu <r63238@freescale.com>
26059 Date: Tue Sep 18 12:36:58 2007 +0800
26061 mpc83xx: Add the support of MPC8315E SoC
26063 The MPC8315E SoC including e300c3 core and new IP blocks,
26064 such as TDM, PCI Express and SATA controller.
26066 Signed-off-by: Dave Liu <daveliu@freescale.com>
26068 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
26069 Author: Dave Liu <r63238@freescale.com>
26070 Date: Tue Sep 18 12:36:11 2007 +0800
26072 mpc83xx: Add the support of MPC837x SoC
26074 The MPC837x SoC including e300c4 core and new IP blocks,
26075 such as SDHC, PCI Express and SATA controller.
26077 Signed-off-by: Dave Liu <daveliu@freescale.com>
26079 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
26080 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
26081 Date: Wed Nov 14 18:54:53 2007 +0300
26083 MPC8360E-MDS: configure and enable second UART
26085 Despite user manual, BCSR9.7 is negated (high) on HRST, so
26086 UART2 is disabled. Fix that and configure QE pins properly.
26088 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26090 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
26091 Author: Timur Tabi <timur@freescale.com>
26092 Date: Mon Nov 5 09:34:06 2007 -0600
26094 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
26096 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
26097 currently-defined 83xx boards. This change guarantees that the environment
26098 will be located on the first flash sector after the U-Boot image.
26100 Signed-off-by: Timur Tabi <timur@freescale.com>
26101 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26103 commit e05329516a13616b53240cd85b739217c2bf87f1
26104 Author: Larry Johnson <lrj@acm.org>
26105 Date: Fri Jan 4 13:27:02 2008 -0500
26107 ppc4xx: Remove weak binding from common Denali data-eye search code
26109 Now that there are no board-specific versions of
26110 "denali_core_search_data_eye()", the weak binding on the common version
26113 Signed-off-by: Larry Johnson <lrj@acm.org>
26115 commit 5ba576c01602fd328800a427964c36a0a05c5dce
26116 Author: Stefan Roese <sr@denx.de>
26117 Date: Sat Jan 5 09:13:46 2008 +0100
26119 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
26121 Signed-off-by: Stefan Roese <sr@denx.de>
26123 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
26124 Author: Stefan Roese <sr@denx.de>
26125 Date: Sat Jan 5 09:12:41 2008 +0100
26127 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
26129 On Katmai the complete auto-calibration somehow doesn't seem to
26130 produce the best results, meaning optimal values for RQFD/RFFD.
26131 This was discovered by GDA using a high bandwidth scope,
26132 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
26133 so now on Katmai "only" RFFD is auto-calibrated.
26135 This patch also adds RDCC calibration as mentioned on page 7 of
26136 the AMCC PowerPC440SP/SPe DDR2 application note:
26137 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
26139 Signed-off-by: Stefan Roese <sr@denx.de>
26141 commit 49db47b8ae6afff2b898be312948ff501357dc80
26142 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26143 Date: Wed Jan 2 16:48:42 2008 +0100
26145 ppc4xx: Remove sdram.h from PMC440 board
26147 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26149 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
26150 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26151 Date: Wed Jan 2 16:48:34 2008 +0100
26153 ppc4xx: use common denali core defines and data eye search code for PMC440
26155 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26157 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
26158 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26159 Date: Wed Jan 2 12:05:14 2008 +0100
26161 ppc4xx: More cleanup for esd's LCD code
26163 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26165 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
26166 Author: Stefan Roese <sr@denx.de>
26167 Date: Fri Jan 4 12:00:01 2008 +0100
26169 ppc4xx: Fix Sequoia NAND booting target
26171 The Sequoia NAND booting target now uses the recently extracted
26172 cpu/ppc4xx/denali_data_eye.c file too.
26174 Signed-off-by: Stefan Roese <sr@denx.de>
26176 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
26177 Author: Lawrence R. Johnson <lrj@acm.org>
26178 Date: Thu Jan 3 15:02:02 2008 -0500
26180 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
26182 Signed-off-by: Larry Johnson <lrj@acm.org>
26184 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
26185 Author: Lawrence R. Johnson <lrj@acm.org>
26186 Date: Fri Jan 4 02:11:56 2008 -0500
26188 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
26190 Note: this patch changes the configuration of some GPIO registers:
26192 Register Old Value New Value
26193 --------------- ---------- ----------
26194 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
26195 DCR GPIO0_TSRH 0x55005000 0x00000000
26196 DCR GPIO1_TCR 0xC2000000 0xE2000000
26197 DCR GPIO1_TSRL 0x0C000000 0x00200000
26198 DCR GPIO1_ISR2L 0x00050000 0x00110000
26200 Signed-off-by: Larry Johnson <lrj@acm.org>
26202 commit 5ab884b254ca2e707ab50545cd705f30108cf491
26203 Author: Lawrence R. Johnson <lrj@acm.org>
26204 Date: Thu Jan 3 18:54:00 2008 -0500
26206 ppc4xx: Add functionality to GPIO support
26208 This patch makes two additions to GPIO support:
26210 First, it adds function gpio_read_in_bit() to read the a bit from the
26211 GPIO Input Register (GPIOx_IR) in the same way that function
26212 gpio_read_out_bit() reads a bit from the GPIO Output Register
26215 Second, it modifies function gpio_set_chip_configuration() to provide
26216 an additional option for configuring the GPIO from the
26217 "CFG_4xx_GPIO_TABLE".
26219 According to the 440EPx User's Manual, when an alternate output is used,
26220 the three-state control is configured in one of two ways, depending on
26221 the particular output. The first option is to select the corresponding
26222 alternate three-state control in the GPIOx_TRSH/L registers. The second
26223 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
26224 the GPIOx_TRSH/L registers, and set the corresponding bit in the
26225 GPIOx_TCR register to enable the output. For example, the Manual
26226 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
26227 the alternate three-state control (first option), and specifies
26228 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
26229 enabled in the GPIOx_TCR register (second option).
26231 Currently, gpio_set_chip_configuration() configures all alternate signal
26232 outputs to use the first option. This patch allow the second option to
26233 be selected by setting the "out_val" element in the table entry to
26234 "GPIO_OUT_1". The first option is used when the "out_val" element is
26235 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
26236 alternate signal is selected, and because all current GPIO tables set
26237 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
26238 not change any existing configurations.
26240 Signed-off-by: Larry Johnson <lrj@acm.org>
26242 commit 196404cdc1de495d6182e84731c200fc5748df15
26243 Author: Larry Johnson <lrj@arlinx.com>
26244 Date: Sun Dec 30 01:01:54 2007 -0500
26246 PPC4xx: Remove sdram.h from board/lwmon5
26248 These definitions are now in "include/ppc440.h".
26250 Signed-off-by: Larry Johnson <lrj@acm.org>
26252 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
26253 Author: Larry Johnson <lrj@arlinx.com>
26254 Date: Sun Dec 30 01:01:32 2007 -0500
26256 PPC4xx: Use common code for LWMON5 board SDRAM support
26258 This patch also modifies the functionality of the code so that the data-eye
26259 search is now done with with the cache disabled.
26261 Signed-off-by: Larry Johnson <lrj@acm.org>
26263 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
26264 Author: Larry Johnson <lrj@arlinx.com>
26265 Date: Sun Dec 30 01:01:14 2007 -0500
26267 PPC4xx: Remove sdram.h from board/amcc/sequoia
26269 These definitions are now in "include/ppc440.h".
26271 Signed-off-by: Larry Johnson <lrj@acm.org>
26273 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
26274 Author: Larry Johnson <lrj@arlinx.com>
26275 Date: Sun Dec 30 01:00:50 2007 -0500
26277 PPC4xx: Use common code for Sequoia board SDRAM support
26279 Signed-off-by: Larry Johnson <lrj@acm.org>
26281 commit 8b0c5c127690335758100c25eaec2b84db97c101
26282 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26283 Date: Thu Dec 27 16:58:41 2007 +0100
26285 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
26287 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
26288 networking stack does not automatically switch to
26289 another interface. This patch does not touch the default
26292 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26293 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26295 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
26296 Author: Upakul Barkakaty <upakul@gmail.com>
26297 Date: Thu Nov 29 12:16:13 2007 +0530
26299 NET: Proper return code handling in eth_init() function in file eth.c
26301 This patch modifies the return code handling in the eth_init()
26302 function, to be compatible with the handling of the return codes in
26303 the other network stack files. It now returns a 0 on Success and -1 on
26306 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
26307 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26309 commit 5ca2d0953e4579a80810966cca2077e20d912c97
26310 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
26311 Date: Mon Nov 19 20:27:04 2007 +0900
26313 net/eth.c: Fix env_enetaddr signed overflow
26315 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
26318 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
26326 Warning: NEC-Candy MAC addresses don't match:
26327 Address in SROM is 00:00:4C:80:92:A2
26328 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
26330 This patch changes env_enetaddr type from `char' to `unsigned char'.
26332 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
26333 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
26334 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26336 commit f85b60710571b37293d2233933b76e2aa3db5635
26337 Author: Rafal Jaworowski <raj@semihalf.com>
26338 Date: Thu Dec 27 18:19:02 2007 +0100
26340 Introduce new eth_receive routine
26342 The purpose of this routine is receiving a single network frame, outside of
26343 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
26344 U-Boot will let them utilise networking facilities. For sending a raw frame
26345 the already existing eth_send() can be used.
26347 The direct consumer of this routine is the newly introduced API layer for
26348 external applications (enabled with CONFIG_API).
26350 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
26351 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
26352 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26354 commit 5c740711f0ea5b51414b341b71597c4a0751be74
26355 Author: Jon Loeliger <jdl@freescale.com>
26356 Date: Thu Jan 3 10:41:04 2008 -0600
26358 8610: Move include of config.h earlier.
26360 Include config.h earlier in the set of #includes
26361 so as to avoid a incidental and duplicate definition
26362 of CFG_CACHELINE_SIZE.
26364 Signed-off-by: Jon Loeliger
26366 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
26367 Author: Jon Loeliger <jdl@freescale.com>
26368 Date: Tue Dec 4 10:53:34 2007 -0600
26370 Don't slam #undef DEBUG in the 8641HPCN config file.
26372 Doing so prevents it from being individually set
26373 and useful in other files.
26375 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26377 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
26378 Author: Jon Loeliger <jdl@freescale.com>
26379 Date: Wed Nov 28 14:47:18 2007 -0600
26381 Convert MPC8641HPCN to use libfdt.
26383 Assumes the presence of the aliases node in the DTS to
26384 locate the ethernet, pci and serial nodes for fixups.
26386 Use consistent fdtaddr and fdtfile in environment variables.
26388 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26390 commit ce37422d0002e10490e268392e0c4e3028e52cec
26391 Author: Stefan Roese <sr@denx.de>
26392 Date: Wed Jan 2 14:06:26 2008 +0100
26394 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
26396 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
26397 flash chips connected to a 32bit wide port.
26399 Signed-off-by: Stefan Roese <sr@denx.de>
26401 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
26402 Author: Wolfgang Denk <wd@denx.de>
26403 Date: Wed Jan 2 15:58:44 2008 +0100
26405 Fix compile problem introduced by "cleanup" commit 3dfd708c
26407 Signed-off-by: Wolfgang Denk <wd@denx.de>
26409 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
26410 Author: Wolfgang Denk <wd@denx.de>
26411 Date: Wed Jan 2 15:54:45 2008 +0100
26413 Make scripts and Makefiles POSIX compliant
26415 The bash builtin versions of the "test" (resp. "[") command allow
26416 using "==" for string comparisons, but POSIX compatible implemen-
26417 tations (like /usr/bin/test) insist on using "=" only. On such systems
26420 $ /usr/bin/test a == a && echo OK
26421 /usr/bin/test: ==: binary operator expected
26423 This patch fixes Makefiles and scripts to use POSIX style.
26425 Signed-off-by: Wolfgang Denk <wd@denx.de>
26427 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
26428 Author: Stefan Roese <sr@denx.de>
26429 Date: Wed Jan 2 14:05:37 2008 +0100
26431 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
26433 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
26434 flash chips connected to a 32bit wide port.
26436 Signed-off-by: Stefan Roese <sr@denx.de>
26438 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
26439 Author: Wolfgang Denk <wd@denx.de>
26440 Date: Wed Jan 2 12:38:43 2008 +0100
26442 Minor coding style cleanup.
26444 Signed-off-by: Wolfgang Denk <wd@denx.de>
26446 commit e174ac34adf5d5653df12bc3cf19c52063a71269
26447 Author: Stefan Roese <sr@denx.de>
26448 Date: Fri Dec 28 17:29:56 2007 +0100
26450 ppc4xx: Coding style cleanup
26452 Signed-off-by: Stefan Roese <sr@denx.de>
26454 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
26455 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26456 Date: Fri Dec 28 17:07:24 2007 +0100
26458 ppc4xx: Complete PMC440 board support
26460 This patch brings the PMC440 board configuration file.
26461 Finally it enables the PMC440 board support.
26463 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26465 commit 407843a582560fc5231299561ab3c2b6b6cd3397
26466 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26467 Date: Fri Dec 28 17:07:18 2007 +0100
26469 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
26471 This patch adds some BSP commands and FPGA booting support
26472 for esd's PMC440 boards.
26474 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26476 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
26477 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26478 Date: Fri Dec 28 17:07:14 2007 +0100
26480 ppc4xx: Add initial esd PMC440 board files
26482 This patch adds the first files for the new esd PMC440 boards.
26483 The next two patches will complete the PMC440 board support.
26485 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26487 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
26488 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26489 Date: Fri Dec 28 17:10:36 2007 +0100
26491 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
26493 - add EEPROM write protection for esd PLU405 boards.
26494 - initialize NAND GPIOs
26495 - use correct io accessors
26498 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26500 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
26501 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26502 Date: Fri Dec 28 17:10:44 2007 +0100
26504 ppc4xx: use correct io accessors for esd's LCD code
26506 This patch fixes esd's LCD dectection code to work correctly with
26507 newer gcc versions.
26509 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26511 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
26512 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26513 Date: Fri Dec 28 17:10:42 2007 +0100
26515 ppc4xx: Maintenance patch for VOH405 boards
26517 - add EEPROM write protection
26518 - initialize NAND GPIOs
26519 - use correct io accessors
26520 - slow down I2C clock to 100kHz
26521 - enable ext. I2C bus
26524 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26526 commit c05569066dbcba3fdf36d4d1943df265dc316a86
26527 Author: Stefan Roese <sr@denx.de>
26528 Date: Fri Dec 28 16:08:08 2007 +0100
26530 ppc4xx: Enable 405EP PCI arbiter per default on all boards
26532 In an attmemt to clean up the 4xx start.S file, I removed the enabling
26533 of the internal 405EP PCI arbiter. This is needed for multiple other
26534 405EP platforms, like most of the esd 405EP. Now the internal PCI
26535 arbiter is enabled again per default as it has been before.
26537 Signed-off-by: Stefan Roese <sr@denx.de>
26538 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26540 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
26541 Author: Stefan Roese <sr@denx.de>
26542 Date: Fri Dec 28 15:53:46 2007 +0100
26544 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
26546 Signed-off-by: Stefan Roese <sr@denx.de>
26547 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26549 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
26550 Author: Stefan Roese <sr@denx.de>
26551 Date: Fri Dec 28 06:06:04 2007 +0100
26553 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
26555 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
26556 platforms mentioned above.
26558 Signed-off-by: Stefan Roese <sr@denx.de>
26560 commit b568fd25574181a3b12ae3d66b2913903442cb83
26561 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26562 Date: Thu Dec 27 17:03:46 2007 +0100
26564 Remove CPCI440 board
26566 This board never left prototyping state and it
26567 became a millstone round my neck. So remove it.
26569 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26571 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
26572 Author: Larry Johnson <lrj@arlinx.com>
26573 Date: Thu Dec 27 11:28:51 2007 -0500
26575 Add support for Korat PPC440EPx board
26577 These patches add support for the PPC440EPx-based "Korat" board to
26578 U-Boot. They are based primarily on support for the Sequoia board.
26580 Signed-off-by: Larry Johnson <lrj@acm.org>
26582 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
26583 Author: Larry Johnson <lrj@arlinx.com>
26584 Date: Sat Dec 22 15:16:25 2007 -0500
26586 Add configuration file for Korat board
26588 This patch supplies the configuration file for the Korat PPC440EPx-
26591 Signed-off-by: Larry Johnson <lrj@acm.org>
26593 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
26594 Author: Larry Johnson <lrj@arlinx.com>
26595 Date: Sat Dec 22 15:16:11 2007 -0500
26597 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
26599 Signed-off-by: Larry Johnson <lrj@acm.org>
26601 commit aba19604d848b2838cfb9ebe818909e6a216058e
26602 Author: Larry Johnson <lrj@arlinx.com>
26603 Date: Thu Dec 27 10:54:48 2007 -0500
26605 Add 440EPx DDR2 SPD DIMM support
26607 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
26608 controller. It should also work on the 440GRx. It is based on the DDR2
26609 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
26611 This code has been tested on prototype Korat boards with three Kingston
26612 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
26613 (two ranks). The Korat board has a single DIMM socket, but support has
26614 been provided (though not tested) for boards with two DIMM sockets.
26616 Signed-off-by: Larry Johnson <lrj@acm.org>
26618 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
26619 Author: Larry Johnson <lrj@arlinx.com>
26620 Date: Sat Dec 22 15:15:30 2007 -0500
26622 Copy 440EPx/GRx SDRAM data-eye search to common directory
26624 This patch creates a non-board-specific file for performing the SDRAM
26625 data-eye search. It also adds ECC error checking to the test of valid
26626 data on readback when ECC is enabled.
26628 Signed-off-by: Larry Johnson <lrj@acm.org>
26630 commit c46f53333b22b1f9098676bea8884fc7db820cf3
26631 Author: Larry Johnson <lrj@arlinx.com>
26632 Date: Sat Dec 22 15:15:13 2007 -0500
26634 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
26636 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
26637 It also fixes two typos in the definitions, so the board-specific
26638 "sdram.h" files containing these definitions are also fixed to avoid
26641 Signed-off-by: Larry Johnson <lrj@acm.org>
26643 commit c348578bf612d0c56d8d376d23cae16defbd86af
26644 Author: Larry Johnson <lrj@arlinx.com>
26645 Date: Thu Dec 27 10:50:55 2007 -0500
26647 Add Ethernet 1000BASE-X support for PPC4xx
26649 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
26650 is defined, the PHY will advertise it's capabilities for autonegotiation
26651 based on the capabilities shown in the PHY's status registers, including
26652 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
26653 advertise hard-coded capabilities, as before.
26655 Signed-off-by: Larry Johnson <lrj@acm.org>
26657 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
26658 Author: Larry Johnson <lrj@arlinx.com>
26659 Date: Thu Dec 27 09:52:17 2007 -0500
26661 Add driver for National Semiconductor LM73 temperature sensor
26663 This driver is based on the driver for the LM75.
26665 Signed-off-by: Larry Johnson <lrj@acm.org>
26667 commit 12618278688ea9b3d76536960a5ad2e3790fac40
26668 Author: Larry Johnson <lrj@arlinx.com>
26669 Date: Sat Dec 22 15:14:00 2007 -0500
26671 Add driver for STMicroelectronics M41T60 RTC
26673 This driver is based on the driver for the M41T11. In the intended
26674 application, the RTC will be powered by a large capacitor, rather than a
26675 battery. The driver therefore checks to see whether the RTC has lost
26676 power. The chip's OUT bit is normally reset from its power-up state. If
26677 the OUT bit is read as set, or if the date and time are not valid, then the
26678 RTC is assumed to have lost power, and its date and time are reset to
26679 1900-01-01 00:00:00.
26681 Support for adjusting the speed of the clock to improve accuracy is
26682 provided through an environment variable.
26684 Signed-off-by: Larry Johnson <lrj@acm.org>
26686 commit d3471173e14b7544bb60339eda8d3d3906694b0a
26687 Author: Larry Johnson <lrj@arlinx.com>
26688 Date: Sat Dec 22 15:34:39 2007 -0500
26690 Use out_be32() and friends to access memory-mapped registers in sequoia.c
26692 Signed-off-by: Larry Johnson <lrj@acm.org>
26694 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
26695 Author: Larry Johnson <lrj@arlinx.com>
26696 Date: Sat Dec 22 15:34:20 2007 -0500
26698 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
26700 Signed-off-by: Larry Johnson <lrj@acm.org>
26702 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
26703 Author: Larry Johnson <lrj@arlinx.com>
26704 Date: Sat Dec 22 15:23:50 2007 -0500
26706 Cosmetic changes to ECC POST for AMCC Denali core
26708 Signed-off-by: Larry Johnson <lrj@acm.org>
26710 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
26711 Author: Stefan Roese <sr@denx.de>
26712 Date: Wed Dec 26 20:20:19 2007 +0100
26714 ppc4xx: Fix compilation problem in 405 cache POST test
26716 Signed-off-by: Stefan Roese <sr@denx.de>
26718 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
26719 Author: Stefan Roese <sr@denx.de>
26720 Date: Sat Dec 22 12:20:09 2007 +0100
26722 ppc4xx: Move virtual address of POST cache test to bigger address
26724 On Sequoia & LWMON5 the virtual address of the POST cache test is now
26725 moved to a bigger address. This enables usage of more memory on those
26728 Signed-off-by: Stefan Roese <sr@denx.de>
26730 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
26731 Author: Stefan Roese <sr@denx.de>
26732 Date: Sat Dec 22 12:18:26 2007 +0100
26734 ppc4xx: Fix problem in 44x cache POST routine
26736 As repoted by Larry Johnson, running "diag run cache" caused a crash
26737 in U-Boot. This problem was introduced by a patch that removed the
26738 TLB entry for the cache test after the test has completed. Since this
26739 TLB was only setup once, a 2nd attempt to run this cache test
26740 failed with a crash. Now this TLB entry is created every time the
26743 Signed-off-by: Stefan Roese <sr@denx.de>
26745 commit b0265b576bb8fa9465f99e99c323768b562fadc2
26746 Author: Stefan Roese <sr@denx.de>
26747 Date: Fri Dec 21 07:51:29 2007 +0100
26749 ppc4xx: Update Makalu fdt support
26751 Signed-off-by: Stefan Roese <sr@denx.de>
26753 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
26754 Author: Stefan Roese <sr@denx.de>
26755 Date: Wed Dec 19 09:05:40 2007 +0100
26757 ppc4xx: Add fdt support to AMCC Katmai eval board
26759 Signed-off-by: Stefan Roese <sr@denx.de>
26761 commit 328a340392a5df9aaf00792be989df73e750859e
26762 Author: Stefan Roese <sr@denx.de>
26763 Date: Tue Dec 18 08:44:51 2007 +0100
26765 ppc4xx: fdt: Cleanup setup of cpu node setup
26767 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
26768 without using the absolute path to the cpu node. This makes it possible
26769 to use this U-Boot version with both versions of cpu-node naming
26770 "cpu@0" and the former "PowerPC,440EPx@0".
26772 Signed-off-by: Stefan Roese <sr@denx.de>
26774 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
26775 Author: Stefan Roese <sr@denx.de>
26776 Date: Mon Dec 17 17:26:21 2007 +0100
26778 ppc4xx: Fix lwmon5 compilation problem
26780 Now that the 440EPx ECC test is not board specific anymore
26781 remove this Makefile.
26783 Signed-off-by: Stefan Roese <sr@denx.de>
26785 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
26786 Author: Anatolij Gustschin <agustschin@t-online.de>
26787 Date: Wed Dec 5 17:43:20 2007 +0100
26789 Fix ppc4xx clear_bss() code
26791 ppc4xx clear_bss() fails if BSS segment size is not
26792 divisible by 4 without remainder. This patch provides
26793 fix for this problem.
26795 Signed-off-by: Anatolij Gustschin <agust@denx.de>
26797 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
26798 Author: Niklaus Giger <niklausgiger@gmx.ch>
26799 Date: Fri Nov 30 18:35:11 2007 +0100
26801 PPC4xx: Minimal changes to add vxWorks support
26803 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26805 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
26806 Author: Markus Klotzbücher <mk@denx.de>
26807 Date: Fri Nov 23 13:09:18 2007 +0100
26809 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
26811 When using dhcp/bootp the "netmask" environment variable is not
26812 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
26813 desireable, so the following patch adds this this option to the board
26816 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
26817 Signed-off-by: Stefan Roese <sr@denx.de>
26819 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
26820 Author: Larry Johnson <lrj@arlinx.com>
26821 Date: Sat Oct 27 12:48:15 2007 -0400
26823 Fix/enhance ECC POST for 440EPx/GRx
26825 This patch allows the ECC POST to be used for different boards with the
26826 PPC440 Denali SDRAM controller. Modifications include skipping the test
26827 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
26828 to prevent timing errors.
26830 Signed-off-by: Larry Johnson <lrj@acm.org>
26832 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
26833 Author: Larry Johnson <lrj@arlinx.com>
26834 Date: Sat Oct 27 12:48:05 2007 -0400
26836 PPC4xx: Move/rename ECC POST for 440EPx/GRx
26838 Signed-off-by: Larry Johnson <lrj@acm.org>
26840 commit c29d2d3680046d430022c55e50fcb27f5866517e
26841 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26842 Date: Fri Dec 14 11:20:33 2007 +0100
26844 ppc4xx: use correct io accessors for 4xx ethernet POST
26846 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26848 commit ba79fde58a48c0a6ff8e2a96caba951594142203
26849 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26850 Date: Fri Dec 14 11:19:56 2007 +0100
26852 ppc4xx: fix flush + invalidate_dcache_range arguments
26854 flush + invalidate_dcache_range() expect the start and stop+1 address.
26855 So the stop address is the first address behind (!) the range.
26857 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26859 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
26860 Author: Stefan Roese <sr@denx.de>
26861 Date: Fri Dec 14 08:41:29 2007 +0100
26863 ppc4xx: fdt: use fdt_fixup_ethernet()
26865 By using aliases in the dts file, the ethernet node fixup is
26866 much easier with the recently added functions.
26868 Please note that the dts file needs the aliases for this to work.
26870 Signed-off-by: Stefan Roese <sr@denx.de>
26872 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
26873 Author: Stefan Roese <sr@denx.de>
26874 Date: Thu Dec 13 14:52:53 2007 +0100
26876 ppc4xx: Bring 4xx fdt support up-to-date
26878 This patch update the 4xx fdt support. It enabled fdt booting
26879 on the AMCC Kilauea and Sequoia for now. More can follow later
26882 Signed-off-by: Stefan Roese <sr@denx.de>
26884 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
26885 Author: Stefan Roese <sr@denx.de>
26886 Date: Thu Dec 27 07:50:54 2007 +0100
26888 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
26890 The check for an sufficiently erased destination was missing in the
26891 buffered write function of the cfi flash driver (when
26892 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
26893 writing to such a region will fail with the currect error message.
26895 Signed-off-by: Stefan Roese <sr@denx.de>
26897 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
26898 Author: Martin Krause <martin.krause@tqs.de>
26899 Date: Mon Nov 12 10:56:17 2007 +0100
26901 Some configuration updates for the TQM5200 based TB5200 board:
26903 - enable command line history
26904 - increase malloc space (because of bigger flash sectors)
26906 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26908 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
26909 Author: Martin Krause <martin.krause@tqs.de>
26910 Date: Thu Sep 27 11:10:08 2007 +0200
26912 TQM8xx: use the CFI flash driver on all TQM8xx boards
26914 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26916 commit 11d9eec479b470eab9242ab937fca70a876d9376
26917 Author: Martin Krause <martin.krause@tqs.de>
26918 Date: Wed Sep 26 17:55:56 2007 +0200
26920 TQM885D: adjust for doubled flash sector size + some minor fixes
26922 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26924 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
26925 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
26926 Date: Wed Sep 26 17:55:54 2007 +0200
26928 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
26930 CAS-Latency=2, Write Recovery Time tWR=2
26931 The max. supported bus frequency is 66 MHz. Therefore, changed
26932 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
26934 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26936 commit b988b8cd443989be65161888eea0127ad03f846f
26937 Author: Martin Krause <martin.krause@tqs.de>
26938 Date: Wed Sep 26 17:55:56 2007 +0200
26940 TQM885D: use calculated cpuclk instead of measuring it
26942 On the TQM885D the measurement of cpuclk with the PIT reference
26943 timer ist not necessary. Since all module variants use the same
26944 external 10 MHz oscillator, the cpuclk only depends on the PLL
26945 configuration - which is readable by software.
26947 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26949 commit 492c7049869348d31168de8dad89651315e468e0
26950 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
26951 Date: Thu Sep 27 14:54:46 2007 +0200
26953 TQM885D: fix SDRAM refresh
26955 At 133 MHz the current SDRAM refresh rate is too fast
26956 (measured 4 * 1.17 us).
26957 CFG_MAMR_PTA changes from 39 to 128. This result
26958 in a refresh rate of 4 * 7.8 us at the default clock
26959 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
26960 This is a compromise until a new method is found to
26961 adjust the refresh rate.
26963 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26965 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
26966 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
26967 Date: Thu Sep 27 14:54:46 2007 +0200
26969 TQM860M: Support for 10col SDRAMs, max. 128 MiB
26971 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26973 commit 61fb15c516fef5631e305f1976d7b3a679725856
26974 Author: Wolfgang Denk <wd@denx.de>
26975 Date: Thu Dec 27 01:52:50 2007 +0100
26977 Fix coding style issues; update CHANGELOG.
26979 Signed-off-by: Wolfgang Denk <wd@denx.de>
26981 commit 467bcee11fe26ad422f2de971aa70866079870f2
26982 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26983 Date: Fri Dec 14 15:36:18 2007 +0100
26985 cfi_flash: Add manufacturer-specific fixups
26987 Run fixups based on the JEDEC manufacturer ID independent of the
26990 This changes current behaviour: Previously, geometry reversal for AMD
26991 chips were done based on the command set ID, while they are now done
26992 based on the JEDEC manufacturer and device ID.
26994 Also add fixup for top-boot Atmel chips. A fixup is needed for
26995 AT49BV6416(T) too, but since u-boot currently only reads the low byte
26996 of the device ID, there's no way to tell it apart from AT49BV642D,
26997 which should not have this fixup. Since AT49BV642D support is
26998 necessary to get ATNGW100 board support into mainline, I've commented
26999 out the fixup for now.
27001 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27003 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
27004 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27005 Date: Fri Dec 14 15:36:17 2007 +0100
27007 cfi_flash: Add cmdset-specific init functions
27009 Move things like reading JEDEC IDs and fixing up geometry reversal
27010 into separate functions. The geometry reversal fixup is now performed
27011 by altering the qry structure directly, which makes the sector init
27012 code slightly cleaner.
27014 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27016 commit e23741f4a6d8047520ef0d4971762749b3587d32
27017 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27018 Date: Fri Dec 14 15:36:16 2007 +0100
27020 cfi_flash: Read whole QRY structure in one go
27022 Read out the whole CFI Standard Query structure after successful cfi
27023 identification. This allows subsequent code to access this information
27024 directly without having to go through flash_read_uchar() and friends.
27026 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27028 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
27029 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27030 Date: Mon Dec 17 11:02:44 2007 +0100
27032 AVR32: Fix logic inversion in disable_interrupts()
27034 disable_interrupts() should return nonzero if interrupts were
27035 _enabled_ before, not disabled.
27037 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27039 commit acac475212cbedb17b321a363a1c878e2b47b37f
27040 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27041 Date: Fri Dec 14 16:51:22 2007 +0100
27043 AVR32: Enable interrupts at bootup
27045 The timer code depends on the timer interrupt to keep track of the
27046 upper 32 bits of the cycle counter. This obviously doesn't work when
27047 interrupts are disabled the whole time.
27049 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27051 commit 9570bcd87f4db255514f43b6701746c412f8fef0
27052 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27053 Date: Thu Nov 15 10:03:45 2007 +0100
27055 AVR32: Fix wrong pin setup for USART3
27057 As reported by Gerhard Berghofer:
27059 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
27060 instead of PB18 and PB19.
27062 which is obviously correct. There's currently no code that uses
27063 USART3, but custom boards may run into problems.
27065 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27067 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
27068 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27069 Date: Thu Nov 1 12:44:20 2007 +0100
27071 README: Remove ATSTK1000 daughterboard list
27073 As noted by Kim Phillips, these lists tend to become out of date.
27075 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27077 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
27078 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27079 Date: Tue Oct 30 14:56:36 2007 +0100
27081 Add ATSTK100[234] to MAINTAINERS
27083 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
27084 "mother". Also update the entry for ATSTK1000 to be not only about the
27085 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
27087 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27089 commit 64ff2357b1727213803591813dbc779c924bf772
27090 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27091 Date: Mon Oct 29 13:02:54 2007 +0100
27093 AVR32: Add support for the ATSTK1004 board
27095 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
27096 which is a derivative of AT32AP7000.
27098 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27100 commit 667568db157f374b85abd7e03596ddd1f0b25681
27101 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27102 Date: Mon Oct 29 13:02:54 2007 +0100
27104 AVR32: Add support for the ATSTK1003 board
27106 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
27107 which is a derivative of AT32AP7000.
27109 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27111 commit 5fee84a794a51ec830548cda485a770efb018b92
27112 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27113 Date: Mon Oct 29 13:23:33 2007 +0100
27115 AVR32: Make some AT32AP700x peripherals optional
27117 Add a chip-features file providing definitions of the form
27119 AT32AP700x_CHIP_HAS_<peripheral>
27121 to indicate the availability of the given peripheral on the currently
27124 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27126 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
27127 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27128 Date: Mon Oct 29 13:09:56 2007 +0100
27130 AVR32: Rename at32ap7000 -> at32ap700x
27132 The SoC-specific code for all the AT32AP700x CPUs is practically
27133 identical; the only difference is that some chips have less features
27134 than others. By doing this rename, we can add support for the AP7000
27135 derivatives simply by making some features conditional.
27137 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27139 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
27140 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27141 Date: Fri Jun 29 18:22:34 2007 +0200
27143 atmel_mci: Show SR when block read fails
27145 Show controller status as well as card status when an error occurs
27148 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27150 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
27151 Author: Stefan Roese <sr@denx.de>
27152 Date: Thu Dec 13 14:52:53 2007 +0100
27154 ppc4xx: Bring 4xx fdt support up-to-date
27156 This patch update the 4xx fdt support. It enabled fdt booting
27157 on the AMCC Kilauea and Sequoia for now. More can follow later
27160 Signed-off-by: Stefan Roese <sr@denx.de>
27162 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
27163 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27164 Date: Thu Dec 13 12:56:34 2007 +0100
27166 cfi_flash: Use map_physmem() and unmap_physmem()
27168 Use map_physmem() and unmap_physmem() to convert from physical to
27169 virtual addresses. This gives the arch a chance to provide an uncached
27170 mapping for flash accesses.
27172 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27174 commit 4d7d6936eb29af7cca330937808312aa5f61454d
27175 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27176 Date: Thu Dec 13 12:56:33 2007 +0100
27178 Introduce map_physmem() and unmap_physmem()
27180 map_physmem() returns a virtual address which can be used to access a
27181 given physical address without involving the cache. unmap_physmem()
27182 should be called when the virtual address returned by map_physmem() is
27185 This patch adds a stub implementation which simply returns the
27186 physical address cast to a uchar * for all architectures except AVR32,
27187 which converts the physical address to an uncached virtual mapping.
27188 unmap_physmem() is a no-op on all architectures, but if any
27189 architecture needs to do such mappings through the TLB, this is the
27190 hook where those TLB entries can be invalidated.
27192 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27194 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
27195 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27196 Date: Thu Dec 13 12:56:32 2007 +0100
27198 cfi_flash: Introduce read and write accessors
27200 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
27201 them to access the flash memory. This makes it clearer when the flash
27202 is actually being accessed; merely dereferencing a volatile pointer
27203 looks just like any other kind of access.
27205 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27207 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
27208 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27209 Date: Thu Dec 13 12:56:31 2007 +0100
27211 Implement __raw_{read,write}[bwl] on all architectures
27213 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
27214 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
27217 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27219 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
27220 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27221 Date: Sat Oct 6 18:55:36 2007 +0200
27223 cfi_flash: Reorder functions and eliminate extra prototypes
27225 Reorder the functions in cfi_flash.c so that each function only uses
27226 functions that have been defined before it. This allows the static
27227 prototype declarations near the top to be eliminated and might allow
27228 gcc to do a better job inlining functions.
27230 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27232 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
27233 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27234 Date: Thu Dec 13 12:56:29 2007 +0100
27236 cfi_flash: Make some needlessly global functions static
27238 Make functions not declared in any header file static.
27240 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27242 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
27243 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27244 Date: Thu Dec 13 12:56:28 2007 +0100
27246 cfi_flash: Break long lines
27248 This patch tries to keep all lines in the cfi_flash driver below 80
27249 columns. There are a few lines left which don't fit this requirement
27250 because I couldn't find any trivial way to break them (i.e. it would
27251 take some restructuring, which I intend to do in a later patch.)
27253 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27255 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
27256 Author: Bartlomiej Sieka <tur@semihalf.com>
27257 Date: Tue Dec 11 13:59:57 2007 +0100
27259 CFI: synchronize command offsets with Linux CFI driver
27261 Fixes non-working CFI Flash on the Inka4x0 board.
27263 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
27265 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
27266 Author: Kumar Gala <galak@kernel.crashing.org>
27267 Date: Fri Dec 7 12:17:34 2007 -0600
27269 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
27271 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
27272 (MPC8544DS, MPC8548CDS, MPC8568MDS).
27274 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27276 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
27277 Author: Kumar Gala <galak@kernel.crashing.org>
27278 Date: Fri Dec 7 12:04:30 2007 -0600
27280 Update Freescale MPC85xx ADS/CDS/MDS board config
27282 * Enabled CONFIG_CMD_ELF
27284 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27286 commit d435793229ce29a42797c1edc39f5b34f987f91a
27287 Author: Kumar Gala <galak@kernel.crashing.org>
27288 Date: Fri Dec 7 04:59:26 2007 -0600
27290 Handle Asynchronous DDR clock on 85xx
27292 The MPC8572 introduces the concept of an asynchronous DDR clock with
27293 regards to the platform clock.
27295 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
27298 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27300 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
27301 Author: Kumar Gala <galak@kernel.crashing.org>
27302 Date: Thu Nov 29 10:34:28 2007 -0600
27304 Update Freescale MPC85xx ADS/CDS/MDS board config
27306 * Removed some misc environment setup
27307 * Enabled CONFIG_CMDLINE_EDITING
27309 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27311 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
27312 Author: Kumar Gala <galak@kernel.crashing.org>
27313 Date: Thu Nov 29 10:47:44 2007 -0600
27315 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
27317 Minor path corrections needed to ensure buildability.
27319 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27321 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
27322 Author: Kumar Gala <galak@kernel.crashing.org>
27323 Date: Thu Nov 29 10:16:18 2007 -0600
27325 Move the MPC8540 ADS board under board/freescale.
27327 Minor path corrections needed to ensure buildability.
27329 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27331 commit 870ceac5b3a3486c109396e005af81ae762b5710
27332 Author: Kumar Gala <galak@kernel.crashing.org>
27333 Date: Thu Nov 29 10:14:50 2007 -0600
27335 Move the MPC8560 ADS board under board/freescale.
27337 Minor path corrections needed to ensure buildability.
27339 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27341 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
27342 Author: Kumar Gala <galak@kernel.crashing.org>
27343 Date: Thu Nov 29 10:13:47 2007 -0600
27345 Move the MPC8568 MDS board under board/freescale.
27347 Minor path corrections needed to ensure buildability.
27349 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27351 commit a853d56c59b33415304531443633808736acfc6e
27352 Author: Kumar Gala <galak@kernel.crashing.org>
27353 Date: Thu Nov 29 02:18:59 2007 -0600
27355 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
27357 We already had defines for LAWAR_TRGT_IF_* that we should use
27358 rather than creating new ones. Also, added some missing defines for
27361 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27363 commit 04db400892da37b76a585e332a0c137954ad2015
27364 Author: Kumar Gala <galak@kernel.crashing.org>
27365 Date: Thu Nov 29 02:10:09 2007 -0600
27367 Stop using immap_t on 85xx
27369 In the future the offsets to various blocks may not be in same location.
27370 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
27371 instead of getting it via &immap.
27373 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27375 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
27376 Author: Kumar Gala <galak@kernel.crashing.org>
27377 Date: Thu Nov 29 01:23:09 2007 -0600
27379 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
27381 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27383 commit c480861bf000156e6a3e932c258db59ff2212dd3
27384 Author: Kumar Gala <galak@kernel.crashing.org>
27385 Date: Thu Nov 29 01:06:19 2007 -0600
27387 Update MPC8568 MDS to use libfdt
27389 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
27390 ethernet, pci, and serial for the various fixups that are done.
27392 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27394 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
27395 Author: Haiying Wang <Haiying.Wang@freescale.com>
27396 Date: Wed Nov 14 15:52:06 2007 -0500
27398 Add PCI Express support on MPC8568MDS
27400 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
27401 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27403 commit b90d25497625b90ffa3f2911a0895ca237556ff5
27404 Author: Kumar Gala <galak@kernel.crashing.org>
27405 Date: Thu Nov 29 00:11:44 2007 -0600
27407 Update MPC85xx CDS to use libfdt
27409 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
27410 ethernet, pci, and serial for the various fixups that are done.
27412 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27414 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
27415 Author: Kumar Gala <galak@kernel.crashing.org>
27416 Date: Wed Nov 28 22:54:27 2007 -0600
27418 Update MPC8540 ADS to use libfdt
27420 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
27421 ethernet, pci, and serial for the various fixups that are done.
27423 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27425 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
27426 Author: Kumar Gala <galak@kernel.crashing.org>
27427 Date: Wed Nov 28 22:40:31 2007 -0600
27429 Update MPC8560 ADS to use libfdt
27431 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
27432 ethernet, pci, and serial for the various fixups that are done.
27434 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27436 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
27437 Author: Kumar Gala <galak@kernel.crashing.org>
27438 Date: Wed Nov 28 00:36:33 2007 -0600
27440 Stop using immap_t for cpm offset on 85xx
27442 In the future the offsets to various blocks may not be in same location.
27443 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
27444 instead of getting it via &immap->im_cpm.
27446 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27448 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
27449 Author: Kumar Gala <galak@kernel.crashing.org>
27450 Date: Tue Nov 27 23:25:02 2007 -0600
27452 Stop using immap_t for guts offset on 85xx
27454 In the future the offsets to various blocks may not be in same location.
27455 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
27456 instead of getting it via &immap->im_gur.
27458 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27460 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
27461 Author: Kumar Gala <galak@kernel.crashing.org>
27462 Date: Tue Nov 27 22:42:34 2007 -0600
27464 Update MPC8544 DS config
27466 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
27467 * Removed some misc environment setup
27468 * Moved to using fdtfile & fdtaddr as fdt env var names
27469 * Enabled CONFIG_CMDLINE_EDITING
27471 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27473 commit addce57e2e4c49e77ffb2020a84690713bb18b47
27474 Author: Kumar Gala <galak@kernel.crashing.org>
27475 Date: Mon Nov 26 17:12:24 2007 -0600
27477 Update MPC8544DS to use libfdt
27479 Updated the MPC8544DS config to use libfdt and assume use of aliases for
27480 ethernet, pci, and serial for the various fixups that are done.
27482 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27484 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
27485 Author: Kumar Gala <galak@kernel.crashing.org>
27486 Date: Thu Nov 29 00:15:30 2007 -0600
27488 Add libfdt based ft_cpu_setup for mpc85xx
27490 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27492 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
27493 Author: Stefan Roese <sr@denx.de>
27494 Date: Tue Dec 11 13:38:19 2007 +0100
27496 ppc4xx: Correct GPIO offset in gpio_config()
27498 Thanks to Gary Jennejohn for pointing this out.
27500 Signed-off-by: Stefan Roese <sr@denx.de>
27502 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
27503 Author: Stefan Roese <sr@denx.de>
27504 Date: Tue Dec 11 11:46:01 2007 +0100
27506 rtc: Fix merging problem
27508 Signed-off-by: Stefan Roese <sr@denx.de>
27510 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
27511 Author: Stefan Roese <sr@denx.de>
27512 Date: Sat Dec 8 14:47:34 2007 +0100
27514 ppc4xx: 405EX: Correctly enable USB pins
27516 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
27517 function control) registers. This is done for the AMCC Kilauea and
27518 Makalu eval boards.
27520 Signed-off-by: Stefan Roese <sr@denx.de>
27522 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
27523 Author: Stefan Roese <sr@denx.de>
27524 Date: Sat Dec 8 08:25:09 2007 +0100
27526 CFI: Coding style cleanup
27528 Signed-off-by: Stefan Roese <sr@denx.de>
27530 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
27531 Author: Michael Schwingen <michael@schwingen.org>
27532 Date: Fri Dec 7 23:35:02 2007 +0100
27534 CFI: support JEDEC flash roms in CFI-flash framework
27536 The following patch adds support for non-CFI flash ROMS, by hooking into the
27537 CFI flash code and using most of its code, as recently discussed here in the
27538 thread "Mixing CFI and non-CFI flashs".
27540 Signed-off-by: Michael Schwingen <michael@schwingen.org>
27541 Signed-off-by: Stefan Roese <sr@denx.de>
27543 commit c01b17dd856fa120b2970f50d9598546a4927ec3
27544 Author: Gerald Van Baren <vanbaren@cideas.com>
27545 Date: Wed Nov 28 21:24:50 2007 -0500
27547 Conditionally compile fdt_fixup_ethernet()
27549 Fix compiler warnings: On boards that don't have ethernets defined,
27550 don't compile fdt_fixup_ethernet().
27552 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
27553 Author: Kumar Gala <galak@kernel.crashing.org>
27554 Date: Tue Nov 27 21:59:46 2007 -0600
27556 Convert boards that set memory node to use fdt_fixup_memory()
27558 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27560 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
27561 Author: Kumar Gala <galak@kernel.crashing.org>
27562 Date: Mon Nov 26 17:06:15 2007 -0600
27564 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
27566 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
27567 determine which serial alias we should set linux,stdout-path to.
27569 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27571 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
27572 Author: Kumar Gala <galak@kernel.crashing.org>
27573 Date: Mon Nov 26 14:57:45 2007 -0600
27575 Add common memory fixup function
27577 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
27579 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27581 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
27582 Author: Kumar Gala <galak@kernel.crashing.org>
27583 Date: Mon Nov 26 11:19:12 2007 -0600
27585 Conditionally compile fdt_support.c
27587 Modify common/Makefile to conditionally compile fdt_support.c based
27588 on CONFIG_OF_LIBFDT.
27590 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27592 commit d88e7ba0980773479e1a64badb293116071b7ef0
27593 Author: Kumar Gala <galak@kernel.crashing.org>
27594 Date: Mon Nov 26 10:41:40 2007 -0600
27596 Fix build breakage due to libfdt import
27598 The IDS8247 got lost in the update and need an API update
27599 do to rename of functions in libfdt.
27601 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27603 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
27604 Author: Gerald Van Baren <vanbaren@cideas.com>
27605 Date: Fri Nov 23 19:43:20 2007 -0500
27607 Add spaces around the = in the fdt print format.
27609 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27611 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
27612 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27613 Date: Fri Dec 7 01:25:38 2007 +0900
27615 sh: Moved driver of the SuperH dependence
27617 The composition of the directory in the drivers/ changed.
27618 I moved SuperH serial driver and marubun PCMCIA driver.
27620 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27622 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
27623 Author: Wolfgang Denk <wd@denx.de>
27624 Date: Thu Dec 6 10:21:19 2007 +0100
27628 Signed-off-by: Wolfgang Denk <wd@denx.de>
27630 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
27631 Author: Wolfgang Denk <wd@denx.de>
27632 Date: Thu Dec 6 10:21:03 2007 +0100
27634 ADS5121 Board: fix compile problem.
27636 Signed-off-by: Wolfgang Denk <wd@denx.de>
27638 commit a27044b14a9e93678a82d7b35f202b93e7687abc
27639 Author: Stefan Roese <sr@denx.de>
27640 Date: Thu Dec 6 05:58:43 2007 +0100
27642 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
27644 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
27645 setting the FIXD bit in the SDR0_MFR register. Here a description of the
27648 Problem Description
27649 ------------------------------
27650 If a DMA is performed between memory and PCI with the DMA 1 Controller
27651 using prefetch, and as a result uses a special purpose buffer selected by
27652 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
27653 the first part of the transfer sequence is performed twice. The
27654 PPC440SPe PCI Controller requests more data than was needed such that in
27655 the case of enforce memory protection, a host CPU exception can occur.
27656 No data is corrupted, because data transfer is stopped in the PCI
27657 Controller. Prefetch enable is specified by setting DMA Configuration
27658 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
27660 Behavior that may be observed in a running system
27661 ---------------------------------------------------------------------------
27663 1. DMA performance is decreased because of the double access on the PCI bus
27665 2. If an illegal access to some address on the PCI bus is detected at the
27666 system level, a machine check or similar system error may occur.
27668 Workarounds Available
27669 ----------------------------------
27671 1. Do not program prefetch. Note that a prefetch command cannot be programmed
27672 without selecting a special purpose buffer.
27673 2. To avoid crossing a physical boundary of the PCI slave device, add 512
27674 bytes of address to the PCI address range.
27676 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
27677 from AMCC and slighly changed.
27679 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
27680 Signed-off-by: Stefan Roese <sr@denx.de>
27682 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
27683 Author: Stefan Roese <sr@denx.de>
27684 Date: Tue Dec 4 16:29:48 2007 +0100
27686 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
27688 Signed-off-by: Stefan Roese <sr@denx.de>
27690 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
27691 Author: Wolfgang Denk <wd@denx.de>
27692 Date: Mon Dec 3 00:15:28 2007 +0100
27694 Prepare for 1.3.1-rc1
27696 Signed-off-by: Wolfgang Denk <wd@denx.de>
27698 commit e15e33433e7c05111968dc9b434a52fd42cbd221
27699 Author: Stefan Roese <sr@denx.de>
27700 Date: Fri Nov 30 07:15:41 2007 +0100
27702 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
27704 This manual PCIe reset triggering solves the problem seen with the
27705 Intel EPRO/1000 card, which was not detected (link not established)
27706 upon power-up reset.
27708 Signed-off-by: Stefan Roese <sr@denx.de>
27710 commit 260eea5676ca46903a335686cc020b29c4ca46fe
27711 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27712 Date: Thu Nov 29 01:21:54 2007 +0900
27714 sh: Add SuperH boards maintainer to MAINTAINERS file
27716 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
27718 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27720 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
27721 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27722 Date: Thu Nov 29 00:13:04 2007 +0900
27724 sh: Add ms7750se support in MAKEALL
27726 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27728 commit c7144373427a178332bf9754131c8c34c52c200a
27729 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27730 Date: Tue Nov 27 09:44:53 2007 +0100
27732 sh: Add sh3 and sh4 support in MAKEALL
27734 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27735 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27737 commit 130080874a3d28450098481a262c5f7c855e908d
27738 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27739 Date: Sun Nov 25 02:51:17 2007 +0900
27741 sh: Add document for SuperH.
27743 This document is a summary of information concerning SuperH of U-Boot.
27745 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27747 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
27748 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27749 Date: Sun Nov 25 02:39:31 2007 +0900
27751 sh: Add marubun's pcmcia driver
27753 Marubun pcmcia is a chip for PCMCIA used with SuperH.
27754 Of course, this can be used even by other architectures.
27755 When use this driver, came to be able to use CompactFlash
27758 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27760 commit febd86b969b975289ed948f1ac0eb9722da41ced
27761 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27762 Date: Sun Nov 25 02:32:13 2007 +0900
27764 sh: Update SuperH SCIF driver
27766 - Changed volatile unsigned to vu_.
27767 - Changed Makefile for kconfig.
27769 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27771 commit 8be760903645af09871be50ad0a6f9ebb62b311d
27772 Author: Stefan Roese <sr@denx.de>
27773 Date: Tue Nov 27 11:57:35 2007 +0100
27775 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
27777 After an error in the AMCC 405EX users manual now correctly configure
27778 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
27781 Signed-off-by: Stefan Roese <sr@denx.de>
27783 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
27784 Author: Wolfgang Denk <wd@denx.de>
27785 Date: Mon Nov 26 19:18:21 2007 +0100
27787 Cleanup coding style; update CHANGELOG
27789 Signed-off-by: Wolfgang Denk <wd@denx.de>
27791 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
27792 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27793 Date: Sun Nov 25 22:39:25 2007 +0100
27795 MAKEALL: add missing 512x boards in ppc
27797 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27799 commit a340c325e668ca7386c2276387681720be9c3757
27800 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27801 Date: Sun Nov 25 18:45:47 2007 +0100
27803 Makefile : fix tags ctags etags with new drivers organization
27805 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27807 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
27808 Author: Stefan Roese <sr@denx.de>
27809 Date: Mon Nov 26 15:06:14 2007 +0100
27811 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
27813 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
27816 Signed-off-by: Stefan Roese <sr@denx.de>
27818 commit ca1ce226287270bb01e25b8e3674c701f12edf19
27819 Author: Stefan Roese <sr@denx.de>
27820 Date: Mon Nov 26 15:01:45 2007 +0100
27822 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
27824 Signed-off-by: Stefan Roese <sr@denx.de>
27826 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
27827 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27828 Date: Sun Nov 25 18:45:47 2007 +0100
27830 Makefile : fix tags ctags etags with new drivers organization
27832 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27834 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
27835 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27836 Date: Sat Nov 24 21:26:56 2007 +0100
27838 drivers/mtd : move mtd drivers to drivers/mtd
27840 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27842 commit 318c0b90431f2648552e5ade78833f42652ce859
27843 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27844 Date: Sat Nov 24 21:17:55 2007 +0100
27846 drivers/misc : move misc drivers to drivers/misc
27848 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27850 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
27851 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27852 Date: Sat Nov 24 21:13:59 2007 +0100
27854 drivers/block : move block drivers to drivers/block
27856 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27858 commit 0c698dcaa70275eb8814f665b545547cee013892
27859 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27860 Date: Sat Nov 24 20:59:50 2007 +0100
27862 drivers/rtc : move rtc drivers to drivers/rtc
27864 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27866 commit f868cc5a50757d94f36c312395481cb0f187d9e6
27867 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27868 Date: Sat Nov 24 20:14:44 2007 +0100
27870 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
27872 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27874 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
27875 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27876 Date: Sat Nov 24 19:46:45 2007 +0100
27878 drivers/input : move input drivers to drivers/input
27880 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27882 commit e4558666293364fc3af1c1d9381ca933fa0f1275
27883 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27884 Date: Sat Nov 24 19:40:11 2007 +0100
27886 drivers/usb : move usb drivers to drivers/usb
27888 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27890 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
27891 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27892 Date: Sat Nov 24 19:33:38 2007 +0100
27894 drivers/serial : move serial drivers to drivers/serial
27896 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27898 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
27899 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27900 Date: Wed Nov 21 21:19:24 2007 +0100
27902 drivers/net : move net drivers to drivers/net
27904 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27906 commit 352d259130b349fe9593b8dada641bd78a9659e5
27907 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27908 Date: Tue Nov 20 20:41:48 2007 +0100
27910 drivers/video : move video drivers to drivers/video
27912 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27914 commit 73646217186aa17afc8e305c5f06f06dd335eaad
27915 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27916 Date: Tue Nov 20 20:33:09 2007 +0100
27918 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
27920 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27922 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
27923 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27924 Date: Tue Nov 20 20:28:09 2007 +0100
27926 drivers/pci : move pci drivers to drivers/pci
27928 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27930 commit 9162352817579840d7802da6d85872b3ca003c97
27931 Author: Gerald Van Baren <vanbaren@cideas.com>
27932 Date: Thu Nov 22 17:23:23 2007 -0500
27934 Fix fdt printing for updated libfdt
27936 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
27938 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27940 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
27941 Author: Kumar Gala <galak@kernel.crashing.org>
27942 Date: Wed Nov 21 13:30:15 2007 -0600
27944 Add additional fdt fixup helper functions
27946 Added the following fdt fixup helpers:
27947 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
27948 * do_fixup_by_compat{_u32} - Find matching nodes by compat
27950 The _u32 variants work the same only the property they are setting
27951 is know to be a 32-bit integer instead of a byte buffer.
27953 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27955 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
27956 Author: Kumar Gala <galak@kernel.crashing.org>
27957 Date: Wed Nov 21 11:11:03 2007 -0600
27959 Add fdt_fixup_ethernet helper to set mac addresses
27961 Added a fixup helper that uses aliases to set mac addresses
27962 in the device tree based on the bd_t
27964 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27966 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
27967 Author: Kumar Gala <galak@kernel.crashing.org>
27968 Date: Wed Nov 21 14:07:46 2007 -0600
27970 Fix warnings from import of libfdt
27972 cmd_fdt.c: In function fdt_print:
27973 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
27974 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
27975 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
27976 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
27978 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27980 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
27981 Author: Kumar Gala <galak@kernel.crashing.org>
27982 Date: Wed Oct 24 11:04:22 2007 -0500
27984 Update libfdt from device tree compiler (dtc)
27986 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
27987 the device tree compiler (dtc) project.
27989 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27991 commit e93becf80d732b64aef81b23e8b6ece02c40533d
27992 Author: Kumar Gala <galak@kernel.crashing.org>
27993 Date: Sat Nov 3 19:46:28 2007 -0500
27995 Move do_fixup* for libfdt into common code
27997 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
27998 into common/fdt_support.c and renamed:
28000 do_fixup() -> do_fixup_by_path()
28001 do_fixup_u32() -> do_fixup_by_path_u32()
28003 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28005 commit f738b4a75998f42a7408defadc9baac7a31c92db
28006 Author: Kumar Gala <galak@kernel.crashing.org>
28007 Date: Thu Oct 25 16:15:07 2007 -0500
28009 Make no options to fdt print default to '/'
28011 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28013 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
28014 Author: Kumar Gala <galak@kernel.crashing.org>
28015 Date: Wed Oct 24 10:21:57 2007 -0500
28017 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
28020 fdt_node_is_compatible
28021 fdt_find_node_by_type
28022 fdt_find_compatible_node
28024 To ease merge of newer libfdt as we aren't using them anywhere at this time.
28026 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
28029 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28031 commit 98e2867cc85409b919f862e6c16026461ec955df
28032 Author: Grant Likely <grant.likely@secretlab.ca>
28033 Date: Wed Nov 21 09:19:37 2007 -0700
28035 [BUILD] Remove libraries when updating autoconf.mk
28037 Fix library problems caused by conditional compilation. Using
28038 autoconf.mk to decide which files to compile has caused a problem when
28039 changing configuration from one board to another without clearing out
28040 the library (*.a) files.
28042 It used to be that the linker was always passed the same list of .o
28043 files when building the .a files. However, that is not longer true
28044 with conditional compilation. Now, a different board config will have
28045 a different file list passed to the linker. The problem occurs when
28046 a library has already been built and the board config is changed.
28048 Since the linker will update instead of replace a preexisting library,
28049 then if the file list changes to remove some object files the old
28050 objects will still exist in the library.
28052 The solution is to remove all old library files when autoconf.mk is
28055 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28057 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
28058 Author: Kumar Gala <galak@kernel.crashing.org>
28059 Date: Wed Nov 21 08:49:50 2007 -0600
28061 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
28063 Modify libfdt/Makefile to conditionally compile the *.c files based
28064 on the board config.
28066 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28068 commit 4a43719a7738712811d822ca8125427b27a55cdc
28069 Author: Grant Likely <grant.likely@secretlab.ca>
28070 Date: Mon Sep 24 09:05:31 2007 -0600
28072 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
28074 Modify common/Makefile to conditionally compile the cmd_*.c files based
28075 on the board config.
28077 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28079 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
28080 Author: Grant Likely <grant.likely@secretlab.ca>
28081 Date: Mon Sep 24 09:05:31 2007 -0600
28083 [BUILD] Generate include/autoconf.mk from board config files
28085 Use cpp and sed to postprocess config.h and import the defined values
28086 into include/autoconf.mk. autoconf.mk is then included by config.mk to
28087 give 'make' access to the board configuration.
28089 Doing this enables conditional compilation at the Makefile level instead
28090 of by wrapping every .c file with #ifdef/#endif wrappers.
28092 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28094 commit 68b88999da87ab88e71e1306192905be3450198e
28095 Author: Jon Loeliger <jdl@freescale.com>
28096 Date: Tue Nov 20 15:02:26 2007 -0600
28098 8610HPCD: Enable the 8610 Display Interface Unit
28100 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28102 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
28103 Author: Jon Loeliger <jdl@freescale.com>
28104 Date: Tue Nov 20 15:00:53 2007 -0600
28106 Move 8610 DIU interface structure definitions to header file.
28108 These two structures are still needed during the
28109 initialization and setup of the DIU hardware.
28110 So move them to the fsl_diu_fb.h file for now.
28113 Noticed-by: York Sun <yorksun@freescale.com>
28114 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28116 commit 080c646dbf474a109c3f85718fb01ce042a38c45
28117 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28118 Date: Tue Nov 20 20:14:18 2007 +0100
28120 drivers/i2c : move i2c drivers to drivers/i2c
28122 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28124 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
28125 Author: Wolfgang Denk <wd@denx.de>
28126 Date: Mon Nov 19 22:20:24 2007 +0100
28128 Prepare for 1.3.0 release.
28130 Signed-off-by: Wolfgang Denk <wd@denx.de>
28132 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
28133 Author: Haiying Wang <Haiying.Wang@freescale.com>
28134 Date: Mon Nov 19 10:02:13 2007 -0500
28136 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
28138 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
28140 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
28142 commit f8c320609366176b31104d9bf5e295232e1c7f1d
28143 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28144 Date: Mon Nov 19 11:14:16 2007 +0900
28146 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
28148 lowlevel_init.S: Assembler messages:
28149 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
28151 Looking at codes, the `memtest' and `clearmem' are intentional mixed
28152 use of `global symbols' and `label' for debugging purpose. To make it
28153 build, just disable global-symbols-use for now. As a result `memtest'
28154 still remains as unused, but leave it be...
28156 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28158 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
28159 Author: Wolfgang Denk <wd@denx.de>
28160 Date: Mon Nov 19 12:59:14 2007 +0100
28162 Fix build problems with mp2usb board
28164 Signed-off-by: Wolfgang Denk <wd@denx.de>
28166 commit 6bf4c686afca1e86e1c384d59218f914605713bf
28167 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28168 Date: Sun Nov 18 18:36:11 2007 +0100
28170 s3c24x0: Fix usb_ohci.c missing in Makefile
28171 and usb_ohci.c warning differ in signedness
28173 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28175 commit 6073f61e078da5ddb521b56256bcc36508589883
28176 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28177 Date: Sun Nov 18 12:55:02 2007 +0100
28179 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
28181 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28183 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
28184 Author: Wolfgang Denk <wd@denx.de>
28185 Date: Sun Nov 18 17:11:09 2007 +0100
28187 Fix compiler warnings for ARM systems.
28189 Signed-off-by: Wolfgang Denk <wd@denx.de>
28191 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
28192 Author: Wolfgang Denk <wd@denx.de>
28193 Date: Sun Nov 18 16:36:27 2007 +0100
28195 Fix compiler warnings for PPC systems. Update CHANGELOG.
28197 Signed-off-by: Wolfgang Denk <wd@denx.de>
28199 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
28200 Author: Stefan Roese <sr@denx.de>
28201 Date: Sun Nov 18 14:44:44 2007 +0100
28203 ppc4xx: Correct 405EX PCIe UTL register mapping
28205 Map 4k mem space for UTL registers for each port.
28207 Signed-off-by: Stefan Roese <sr@denx.de>
28209 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
28210 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28211 Date: Sat Nov 17 11:31:10 2007 +0100
28213 Fix warning differ in signedness in net/net.c and net/nfs.c
28215 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
28216 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28217 Date: Sat Nov 17 20:42:45 2007 +0900
28219 gth2.c: Fix a warning on gth2 build.
28221 gth2.c: In function 'misc_init_r':
28222 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
28224 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28226 commit 2309c130aa4c84b91bd874a41269c923eb61b555
28227 Author: Stefan Roese <sr@denx.de>
28228 Date: Sat Nov 17 07:58:25 2007 +0100
28230 Fix warning differ in signedness in common/cmd_scsi.c
28232 Signed-off-by: Stefan Roese <sr@denx.de>
28234 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
28235 Author: Stefan Roese <sr@denx.de>
28236 Date: Sat Nov 17 14:52:29 2007 +0100
28238 ppc4xx: Update AMCC Kilauea config file
28240 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
28242 Signed-off-by: Stefan Roese <sr@denx.de>
28244 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
28245 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28246 Date: Sat Nov 17 20:05:26 2007 +0900
28248 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
28250 Current trick to pick up GNU assembler minor version does not work with the
28251 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
28254 $ sde-as --version |grep "GNU assembler"
28255 GNU assembler 2.15.94 mipssde-6.02.02-20050602
28256 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
28258 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
28262 $ mips-linux-as --version |grep "GNU assembler"
28263 GNU assembler (GNU Binutils) 2.18
28264 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
28266 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
28270 As a result of above, you'll see many noises with such binutils:
28273 /bin/sh: line 0: [: : integer expression expected
28274 /bin/sh: line 0: [: : integer expression expected
28275 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
28276 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
28277 /bin/sh: line 0: [: : integer expression expected
28278 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
28279 /bin/sh: line 0: [: : integer expression expected
28280 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
28281 /bin/sh: line 0: [: : integer expression expected
28283 This patch simplifies the trick and makes it work with both versions of gas.
28284 I also replace an expensive `awk (or gawk)' with `cut'.
28286 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28288 commit 16664f72850846e645616da1c0fa5afcd6d15f15
28289 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28290 Date: Sat Nov 17 20:05:26 2007 +0900
28292 [MIPS] Remove useless instructions for initializing $gp.
28294 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28296 commit 03c031d5660ea946c39af6e2e16267da857c609f
28297 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28298 Date: Sat Oct 27 15:27:06 2007 +0900
28300 [MIPS] MIPS 4K core: Coding style cleanups
28302 No logical changes.
28304 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28306 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
28307 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28308 Date: Sat Nov 17 20:05:20 2007 +0900
28310 [MIPS] gth2.c: Fix a warning on gth2 build.
28312 gth2.c: In function 'misc_init_r':
28313 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
28315 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28317 commit 4fbd0741b2b6441da10be93e10267122581b7079
28318 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28319 Date: Sat Oct 27 15:22:33 2007 +0900
28321 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
28323 au1x00_eth.c: In function 'au1x00_miiphy_write':
28324 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
28326 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28328 commit f01320459736f156707425cf8112f98606301aa4
28329 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28330 Date: Sat Oct 27 15:00:25 2007 +0900
28332 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
28334 au1x00_eth.c: In function 'au1x00_enet_initialize':
28335 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
28336 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
28337 au1x00_eth.c:246: error: for each function it appears in.)
28338 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
28339 au1x00_eth.c: In function 'au1x00_miiphy_write':
28340 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
28341 make[1]: *** [au1x00_eth.o] Error 1
28343 Fixed by moving these two functions forward.
28345 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28347 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
28348 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28349 Date: Sat Oct 27 15:00:25 2007 +0900
28351 MAKEALL: Added missing pb1000 board
28353 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28355 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
28356 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28357 Date: Sat Oct 27 15:00:24 2007 +0900
28359 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
28361 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28363 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
28364 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28365 Date: Sat Oct 27 15:00:24 2007 +0900
28367 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
28369 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28371 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
28372 Author: Wolfgang Denk <wd@denx.de>
28373 Date: Sat Nov 17 02:34:38 2007 +0100
28375 Update CHANGELOIG, prepare for -rc4
28377 Signed-off-by: Wolfgang Denk <wd@denx.de>
28379 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
28380 Author: Luotao Fu <l.fu@pengutronix.de>
28381 Date: Wed Nov 14 18:58:33 2007 +0100
28383 Fix the i2c frequency and default address in rsdproto board
28385 rsdproto board support has wrong I2C frequency and wrong return value
28388 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
28390 commit 429c180edad038f91c989cb14b478228092e7054
28391 Author: Wolfgang Denk <wd@denx.de>
28392 Date: Sat Nov 17 01:45:38 2007 +0100
28394 powerpc: Backout relocation changes for MPC5121, too.
28396 Apply Grant Likely's backout to MPC5121 code, too.
28398 Pointed out by Rafal Jaworowski <raj@semihalf.com>
28400 Signed-off-by: Wolfgang Denk <wd@denx.de>
28402 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
28403 Author: Grant Likely <grant.likely@secretlab.ca>
28404 Date: Tue Nov 13 22:18:33 2007 -0700
28406 powerpc: Backout relocation changes.
28408 Ugh. I *hate* to back this change out, but these compiler flags don't
28409 work for relocation on all versions of GCC. I've not been able to
28410 reproduce the environment in my setup (and hence, not been able to
28411 find a combination that *does* work), so I've got no choice but to go
28412 back to the old gcc flags and linker script.
28414 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28416 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
28417 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28418 Date: Tue Nov 13 09:11:05 2007 +0100
28420 Fixed mips_io_port_base build errors.
28422 This patch has been sent on:
28425 Although mips_io_port_base is currently a part of IDE command, it is quite
28426 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
28427 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
28429 This patch is triggered by multiple definition of `mips_io_port_base' build
28430 error on gth2 (and tb0229 also needs this fix.)
28432 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
28433 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
28434 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
28435 make: *** [u-boot] Error 1
28437 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28438 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28440 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
28441 Author: Wolfgang Denk <wd@denx.de>
28442 Date: Sat Nov 17 01:30:40 2007 +0100
28444 Fix a bug in the slave serial programming mode for the Xilinx
28445 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
28446 the most significant bit was set, which did not work on any
28447 architecture where "char" defaulted to be an unsigned type.
28449 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
28451 Signed-off-by: Wolfgang Denk <wd@denx.de>
28453 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
28454 Author: Jon Loeliger <jdl@freescale.com>
28455 Date: Thu Nov 1 12:23:29 2007 -0500
28457 86xx: Fix broken variable reference when #def DEBUGing.
28459 Sometimes you can't reference the DDR2 controller variables.
28461 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28463 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
28464 Author: Jason Jin <Jason.jin@freescale.com>
28465 Date: Fri Oct 26 18:32:00 2007 +0800
28467 make 8610 board use pixis reset
28469 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28471 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
28472 Author: Jason Jin <Jason.jin@freescale.com>
28473 Date: Mon Oct 29 19:26:21 2007 +0800
28475 Unify pixis_reset altbank across board families
28477 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
28478 into the separate board config files.
28480 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28481 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28483 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
28484 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28485 Date: Wed Nov 7 08:19:21 2007 +0100
28487 Fix warning: pointer targets in assignment differ in signedness
28489 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28491 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
28492 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28493 Date: Wed Nov 7 08:19:19 2007 +0100
28495 Fix warning differ in signedness in common/cmd_ide.c
28497 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28499 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
28500 Author: Stefan Roese <sr@denx.de>
28501 Date: Fri Nov 16 14:16:54 2007 +0100
28503 ppc4xx: Enable 405EX PCIe UTL register configuration
28505 Till now the UTL registers on 405EX were not initialized but left with
28506 their default values. This patch new initializes some of the UTL
28507 registers on 405EX.
28509 Signed-off-by: Stefan Roese <sr@denx.de>
28511 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
28512 Author: Stefan Roese <sr@denx.de>
28513 Date: Fri Nov 16 14:00:59 2007 +0100
28515 ppc4xx: Update AMCC Makalu for board rev 1.1
28517 This patch adds changes needed for Makalu rev 1.1:
28519 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
28520 - Enable 2nd ethernet port EMAC1
28521 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
28522 - Reset PCIe ports via GPIO upon bootup
28524 Signed-off-by: Stefan Roese <sr@denx.de>
28526 commit 4d4faae65e115e327425cd514c1a35146a85166b
28527 Author: Grant Likely <grant.likely@secretlab.ca>
28528 Date: Mon Sep 24 09:05:31 2007 -0600
28530 Group PCI and PCMCIA drivers in drivers/Makefile
28532 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28534 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
28535 Author: Grant Likely <grant.likely@secretlab.ca>
28536 Date: Mon Sep 24 09:05:31 2007 -0600
28538 Group block/flash drivers in drivers/Makefile
28540 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28542 commit df58c81551700f058b44cacf55a7997fa63bfe0a
28543 Author: Grant Likely <grant.likely@secretlab.ca>
28544 Date: Mon Sep 24 09:05:31 2007 -0600
28546 Group USB drivers in drivers/Makefile
28548 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28550 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
28551 Author: Grant Likely <grant.likely@secretlab.ca>
28552 Date: Mon Sep 24 09:05:30 2007 -0600
28554 Group i2c drivers in drivers/Makefile
28556 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28558 commit ec00c76de0e5971273905998d62d6bb119324218
28559 Author: Grant Likely <grant.likely@secretlab.ca>
28560 Date: Mon Sep 24 09:05:30 2007 -0600
28562 Group console drivers in drivers/Makefile
28564 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28566 commit 754f230aa01b8c789fc31f8013c2487954073300
28567 Author: Grant Likely <grant.likely@secretlab.ca>
28568 Date: Mon Sep 24 09:05:30 2007 -0600
28570 Group network drivers in drivers/Makefile
28572 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28574 commit f0037c56b0d12cd46215124667b9f83d60ef9391
28575 Author: Grant Likely <grant.likely@secretlab.ca>
28576 Date: Mon Sep 24 09:05:30 2007 -0600
28578 Build: split COBJS value into multiple lines
28580 This change is in preparation for condtitionial compile support in the
28581 build system. By spliting them all into seperate lines now, subsequent
28582 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
28583 be less invasive and easier to review
28585 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28587 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
28588 Author: Grant Likely <grant.likely@secretlab.ca>
28589 Date: Mon Sep 24 09:05:30 2007 -0600
28591 Add .gitignore files
28593 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28594 Acked-by: Kim Phillips <kim.phillips@freescale.com>
28596 commit 955413f35f054a82e40042f1dbcf501c6a05719b
28597 Author: Grant Likely <grant.likely@secretlab.ca>
28598 Date: Thu Nov 15 08:27:52 2007 -0700
28600 Revert "Correct relocation fixup for mpc5xx"
28602 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
28603 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28605 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
28606 Author: Grant Likely <grant.likely@secretlab.ca>
28607 Date: Thu Nov 15 08:24:32 2007 -0700
28609 Revert "Correct fixup relocation for MPC5xxx"
28611 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
28612 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28614 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
28615 Author: Grant Likely <grant.likely@secretlab.ca>
28616 Date: Thu Nov 15 08:21:04 2007 -0700
28618 Revert "Correct fixup relocation for mpc8220"
28620 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
28621 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28623 commit 70922342369e5e39b286fe21e768a239ca07a514
28624 Author: Grant Likely <grant.likely@secretlab.ca>
28625 Date: Thu Nov 15 08:20:57 2007 -0700
28627 Revert "Correct fixup relocation for mpc824x"
28629 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
28630 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28632 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
28633 Author: Grant Likely <grant.likely@secretlab.ca>
28634 Date: Thu Nov 15 08:20:50 2007 -0700
28636 Revert "Correct fixup relocation for mpc8260"
28638 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
28639 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28641 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
28642 Author: Grant Likely <grant.likely@secretlab.ca>
28643 Date: Thu Nov 15 08:20:43 2007 -0700
28645 Revert "Correct fixup relocation for mpc83xx"
28647 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
28648 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28650 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
28651 Author: Grant Likely <grant.likely@secretlab.ca>
28652 Date: Thu Nov 15 08:20:25 2007 -0700
28654 Revert "[MPC512x] Correct fixup relocation"
28656 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
28657 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28659 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
28660 Author: Stefan Roese <sr@denx.de>
28661 Date: Thu Nov 15 14:25:09 2007 +0100
28663 ppc4xx: Small AMCC Kilauea cleanup
28665 Remove not needed pci_target_init() function.
28667 Signed-off-by: Stefan Roese <sr@denx.de>
28669 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
28670 Author: Stefan Roese <sr@denx.de>
28671 Date: Thu Nov 15 14:23:55 2007 +0100
28673 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
28675 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
28676 - Cleanup of the 4xx GPIO functions
28677 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
28679 Signed-off-by: Stefan Roese <sr@denx.de>
28681 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
28682 Author: Stefan Roese <sr@denx.de>
28683 Date: Thu Nov 15 14:20:08 2007 +0100
28685 ppc4xx: AMCC Taihu board config file cleanup
28687 This patch makes the AMCC Taihu a little more compatible to the other
28690 Signed-off-by: Stefan Roese <sr@denx.de>
28692 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
28693 Author: Marian Balakowicz <m8@semihalf.com>
28694 Date: Thu Nov 15 13:37:28 2007 +0100
28696 [INKA4x0] NG hardware: flash support
28698 Disabled and remove inka4x0 custom flash driver, use CFI flash
28701 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28703 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
28704 Author: Marian Balakowicz <m8@semihalf.com>
28705 Date: Thu Nov 15 13:29:55 2007 +0100
28707 [INKA4x0] NG hardware: SDRAM support
28709 Add support for three new DDR chips that may be present on a NG
28710 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
28712 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
28714 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28716 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
28717 Author: Marian Balakowicz <m8@semihalf.com>
28718 Date: Thu Nov 15 13:24:43 2007 +0100
28720 [INKA4x0] NG hardware: platform code update
28722 - Cleanup compile warnings.
28723 - Add missing '\0' in default environment.
28724 - Increase CFG_MONITOR_LEN to 256 KiB.
28725 - Add required CFG_USE_PPCENV.
28727 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28729 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
28730 Author: Peter Pearse <peter.pearse@arm.com>
28731 Date: Thu Nov 15 08:58:00 2007 +0000
28733 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
28734 Remove warnings re onenand_read() & write()
28736 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
28737 Author: Peter Pearse <peter.pearse@arm.com>
28738 Date: Thu Nov 15 08:45:13 2007 +0000
28742 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
28743 Author: Roy Zang <tie-fei.zang@freescale.com>
28744 Date: Thu Sep 13 18:52:28 2007 +0800
28746 Enable ULi1575 Ethernet support in 8610HPCD config
28748 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28749 Acked-by: Jon Loeliger <jdl@freescale.com>
28751 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
28752 Author: Stefan Roese <sr@denx.de>
28753 Date: Tue Nov 13 08:18:20 2007 +0100
28755 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
28757 Signed-off-by: Stefan Roese <sr@denx.de>
28759 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
28760 Author: Stefan Roese <sr@denx.de>
28761 Date: Tue Nov 13 08:06:11 2007 +0100
28763 ppc4xx: Fix 405EX PCIe UTLSET register setup
28765 Signed-off-by: Stefan Roese <sr@denx.de>
28767 commit 1ce55151c85d068f70317a8d65c61058b891afb4
28768 Author: Heiko Schocher <hs@denx.de>
28769 Date: Tue Nov 13 07:50:29 2007 +0100
28771 [UC101] SRAM now with 2 MB working.
28773 Signed-off-by: Heiko Schocher <hs@denx.de>
28775 commit 2d14684341109a69616e4d6016cd61402d55086f
28776 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28777 Date: Fri Nov 9 15:37:53 2007 +0100
28779 ppc4xx: Use generic usb-ohci driver for sequoia board
28781 This patch makes the sequoia board use the generic usb-ohci driver
28782 instead of cpu/ppc4xx/usb_ohci.c.
28784 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28785 Signed-off-by: Stefan Roese <sr@denx.de>
28787 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
28788 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28789 Date: Fri Nov 9 15:37:23 2007 +0100
28791 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
28793 This patch disables the 44x d-cache on 'usb start' and
28794 reenables it on 'usb stop'. This should be seen as a
28795 temporary fix until the generic usb-ohci driver can
28796 life with d-cache enabled.
28798 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28799 Signed-off-by: Stefan Roese <sr@denx.de>
28801 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
28802 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28803 Date: Fri Nov 9 15:36:44 2007 +0100
28805 ppc4xx: Remove redundant code from 4xx network driver
28807 This patch removes some redundant code and decrements the end
28808 address of cache flush and invalidate by 1.
28810 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28811 Signed-off-by: Stefan Roese <sr@denx.de>
28813 commit 5ca9881aad8c413ac2a82868a5e3719178254502
28814 Author: Peter Pearse <peter.pearse@arm.com>
28815 Date: Fri Nov 9 15:24:26 2007 +0000
28817 Add apollon board support
28818 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
28820 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
28821 Author: Stefan Roese <sr@denx.de>
28822 Date: Fri Nov 9 12:19:58 2007 +0100
28824 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
28826 Signed-off-by: Stefan Roese <sr@denx.de>
28828 commit c7f69c340277935a6c19a956421852da944a365f
28829 Author: Stefan Roese <sr@denx.de>
28830 Date: Fri Nov 9 12:18:54 2007 +0100
28832 ppc4xx: Make output a little shorter on I2C bootrom detection
28834 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
28835 already print a line with the information which I2C bootrom is
28836 used for bootstrap configuration. So we don't need this extra line
28837 with "I2C boot EEPROM en-/dis-abled".
28839 This patch also has a little code cleanup integrated.
28841 Signed-off-by: Stefan Roese <sr@denx.de>
28843 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
28844 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28845 Date: Thu Nov 8 12:50:18 2007 -0600
28847 ColdFire: MCF5329 - Remove reset registers from CCM
28849 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28851 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
28852 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28853 Date: Thu Nov 8 12:31:11 2007 -0600
28855 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
28857 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28859 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
28860 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28861 Date: Thu Nov 8 12:19:01 2007 -0600
28863 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
28865 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28867 commit 225a24b5e062ad94627424508ae814f51dbe1a34
28868 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28869 Date: Wed Nov 7 18:00:54 2007 -0600
28871 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
28873 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28875 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
28876 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28877 Date: Wed Nov 7 17:56:15 2007 -0600
28879 ColdFire: MCF532x - Update do_reset() using core reset
28881 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28883 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
28884 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28885 Date: Wed Nov 7 17:51:00 2007 -0600
28887 ColdFire: Update cpu flag for 4.2-xx compiler
28889 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28891 commit 070ba56115b4da63b46e974287fa4550d4023386
28892 Author: York Sun <yorksun@freescale.com>
28893 Date: Wed Oct 31 14:59:04 2007 -0500
28895 8610: Add console frame buffer support to FSL 8610 DIU driver.
28897 Add cfb console support to FSL 8610 DIU driver.
28898 Inspect board version from PIXIS to obtain correct pixel format.
28900 Use #define CONFIG_VIDEO in config file to enable fb console.
28902 To switch monitor, set monitor variable to
28903 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
28904 followed by "diufb init".
28906 Preserve logo bitmap at the top of the fb console.
28908 Signed-off-by: York Sun <yorksun@freescale.com>
28909 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28911 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
28912 Author: York Sun <yorksun@freescale.com>
28913 Date: Mon Oct 29 13:58:39 2007 -0500
28915 8610: Add 8610 DIU display driver
28917 1280x1024 and 1024x768 @ 32 bpp are supported now.
28918 DVI, Single-link LVDS, Double-link LVDS are all supported.
28920 Environmental variable "monitor" is used to specify monitor port.
28922 A new command "diufb" is introduced to reinitialize monitor
28923 and display a BMP file in the memory. So far, 1-bit, 4-bit,
28924 8-bit and 24-bit BMP formats are supported.
28927 - initialize the diu driver
28928 Enable the port specified in the environmental variable "monitor"
28931 - display bmp file in memory.
28932 The bmp image should be no bigger than the resolution, 1280x1024
28933 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
28935 Note, this driver allocate memory but doesn't free it after use
28936 It is written on purpose -- to avoid a failure of reallocation
28937 due to memory fragement.
28939 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
28941 Signed-off-by: York Sun <yorksun@freescale.com>
28942 Signed-off-by: Jon loeliger <jdl@freescale.com>
28944 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
28945 Author: York Sun <yorksun@freescale.com>
28946 Date: Wed Oct 31 10:43:59 2007 -0500
28948 FSL: Add a freescale bitmap logo.
28950 This Freescale logo is a 340 x 128 x 4bpp BMP file
28951 that can be displayed by the DIU Framebuffer driver.
28953 Signed-off-by: York Sun <yorksun@freescale.com>
28954 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28956 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
28957 Author: York Sun <yorksun@freescale.com>
28958 Date: Mon Oct 29 13:57:53 2007 -0500
28960 8610: Make some extra debug environment variables conditional.
28962 One may #define ENV_DEBUG to get them back again.
28964 Signed-off-by: York Sun <yorksun@freescale.com>
28966 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
28967 Author: Jason Jin <Jason.jin@freescale.com>
28968 Date: Mon Oct 29 19:26:21 2007 +0800
28970 8610: Actually enable pixis_reset CONFIGs
28972 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28974 commit f3bceaab230b4748d0afc4109b6837308f018b40
28975 Author: Jason Jin <Jason.jin@freescale.com>
28976 Date: Fri Oct 26 18:31:59 2007 +0800
28978 Fix the BAT definition of PCI IO on 8610 board
28980 The address in the BAT register is aligned with the BAT size.
28981 The original definition actually did not define BAT for PCIE2 IO.
28982 This patch fix this.
28984 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28986 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
28987 Author: Jason Jin <Jason.jin@freescale.com>
28988 Date: Mon Oct 29 19:26:21 2007 +0800
28990 Unify pixis_reset altbank across board families
28992 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
28993 into the separate board config files.
28995 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28996 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28998 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
28999 Author: Jason Jin <Jason.jin@freescale.com>
29000 Date: Fri Oct 26 18:32:00 2007 +0800
29002 make 8610 board use pixis reset
29004 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
29006 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
29007 Author: Jon Loeliger <jdl@freescale.com>
29008 Date: Thu Nov 1 12:23:29 2007 -0500
29010 86xx: Fix broken variable reference when #def DEBUGing.
29012 Sometimes you can't reference the DDR2 controller variables.
29014 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29016 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
29017 Author: Roy Zang <tie-fei.zang@freescale.com>
29018 Date: Mon Nov 5 17:39:24 2007 +0800
29020 Implement general ULi 526x Ethernet driver support in U-boot
29022 This patch implements general ULi 526x Ethernet driver.
29023 Until now, it is the only native Ethernet port on
29024 MPC8610HPCD board, but it could be used on other boards
29025 with ULi 526x Ethernet port as well.
29027 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
29028 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
29029 Acked-by: Jon Loeliger <jdl@freescale.com>
29030 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29032 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
29033 Author: Larry Johnson <lrj@arlinx.com>
29034 Date: Thu Nov 1 08:46:50 2007 -0500
29036 NET: Add Ethernet 1000BASE-X support for PPC4xx
29038 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
29039 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
29040 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
29041 "mii info" command is modified to distinguish between 1000BASE-T and -X.
29043 Signed-off-by: Larry Johnson <lrj@acm.org>
29044 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29046 commit 298035df4948b113d29ac0e694717d34b95bc5dc
29047 Author: Larry Johnson <lrj@arlinx.com>
29048 Date: Wed Oct 31 11:21:29 2007 -0500
29050 NET: Cosmetic changes
29052 Signed-off-by: Larry Johnson <lrj@acm.org>
29053 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29055 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
29056 Author: Stefan Roese <sr@denx.de>
29057 Date: Mon Nov 5 07:43:05 2007 +0100
29059 ppc4xx: Make output a little shorter on PCIe detection
29061 Now not max 3 lines but 2 lines are printed per PCIe port.
29063 Signed-off-by: Stefan Roese <sr@denx.de>
29065 commit 992742a5b09d9040adbd156fb90756af66ade310
29066 Author: Wolfgang Denk <wd@denx.de>
29067 Date: Sat Nov 3 23:09:27 2007 +0100
29069 Cleanup coding style; update CHANGELOG
29071 Signed-off-by: Wolfgang Denk <wd@denx.de>
29073 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
29074 Author: Bruce Adler <bruce.adler@ccpu.com>
29075 Date: Fri Nov 2 13:15:42 2007 -0700
29077 fix wording in README
29079 Changed the wording to properly describe the shadowing
29080 of the environment from ROM to RAM
29082 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
29084 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
29085 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29086 Date: Wed Oct 31 02:18:15 2007 +0900
29088 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
29090 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29092 commit ec22755799466c8a103664bb3a5e647bf9c238f4
29093 Author: Vlad Lungu <vlad@comsys.ro>
29094 Date: Thu Oct 25 16:08:14 2007 +0300
29096 Trimmed some variables in ne2000.c
29098 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
29100 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
29101 Author: Zhang Wei <wei.zhang@freescale.com>
29102 Date: Thu Oct 25 17:51:27 2007 +0800
29104 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
29106 The scan code of the key 'z' is 0x1d, which should be handled.
29108 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
29111 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
29113 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
29114 Author: Zhang Wei <wei.zhang@freescale.com>
29115 Date: Thu Oct 25 17:30:04 2007 +0800
29117 Fix USB support issue for MPC8641HPCN board.
29119 The configuration file has already enabled USB, but it
29120 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
29121 on MPC8641HPCN can not work because of the wrong USB
29124 And add the USB command to U-Boot commands list.
29126 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
29128 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
29129 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29130 Date: Wed Oct 24 18:16:01 2007 +0200
29132 Use config_cmd_default.h instead of config_cmd_all.h
29134 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29136 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
29137 Author: Marian Balakowicz <m8@semihalf.com>
29138 Date: Wed Oct 24 01:37:36 2007 +0200
29140 TQM5200: Call usb_cpu_init() during board init
29142 usb_cpu_init() configures GPS USB pins, clocks, etc. and
29143 is required for proper operation of kernel USB subsystem.
29144 This setup was previously done in the kernel by the fixup
29145 code which is being removed, thus low level init must be
29146 done by U-boot now.
29148 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
29150 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
29151 Author: Guennadi Liakhovetski <lg@denx.de>
29152 Date: Tue Oct 23 16:25:50 2007 +0200
29156 An obvious typo. Originally fixed in linkstation u-boot port.
29158 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
29160 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
29161 Author: Guennadi Liakhovetski <lg@denx.de>
29162 Date: Tue Oct 23 14:35:05 2007 +0200
29164 Fix a typo in cpu/mpc824x/interrupts.c
29166 Since December 2003 the timer_interrupt_cpu() function in
29167 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
29168 parameter. Remove it.
29170 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
29172 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
29173 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
29174 Date: Wed Oct 17 11:13:51 2007 +0200
29176 add ft_cpu_setup(..) on mpc8260
29178 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
29179 based on code from mpc5xxx
29181 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
29184 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
29185 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
29186 Date: Wed Oct 17 11:18:42 2007 +0200
29188 changes for IDS8247 board support
29190 To get the IDS8247 board working following are done:
29191 - FCC2 is deactivated
29192 - FCC1 is activated
29194 - CFI driver is activated
29195 - Adapted for use with LIBFDT
29197 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
29200 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
29201 Author: Stefan Roese <sr@denx.de>
29202 Date: Sat Nov 3 12:08:28 2007 +0100
29204 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
29206 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
29207 Again, only one image supports both targets.
29209 Signed-off-by: Stefan Roese <sr@denx.de>
29211 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
29212 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29213 Date: Wed Oct 24 15:48:37 2007 +0200
29215 ATSTK1002: Remove default ethernet addresses
29217 Wolfgang is right: It's not a good idea to set up default initial
29218 ethernet addresses for a board, even though they belong to the local
29221 This will change the failure mode from "IT manager screams at you for
29222 using duplicate ethernet addresses" to a nice error message explaining
29223 that the ethernet address hasn't been set properly.
29225 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29227 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
29228 Author: Justin Flammia <jflammia@savantav.com>
29229 Date: Mon Oct 29 17:40:35 2007 -0400
29233 This is a multi-part message in MIME format.
29235 commit e6e505eae94ed721e123e177489291fc4544b7b8
29236 Author: Justin Flammia <jflammia@savantav.com>
29237 Date: Mon Oct 29 17:19:03 2007 -0400
29239 Found a bug in the way the DHCP Request packet is built, where the IP address
29240 that is offered by the server is bound to prematurely. This patch is a fix of
29241 that bug where the IP address offered by the DHCP server is not used until
29242 after the DHCP ACK from the server is received.
29244 Signed-off-by: Justin Flammia <jflammia@savantav.com>
29245 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29247 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
29248 Author: Stefan Roese <sr@denx.de>
29249 Date: Wed Oct 31 20:58:34 2007 +0100
29251 ppc4xx: Fix acadia_nand build problem
29253 Since the cache handling functions were moved from start.S into cache.S
29254 the acadia NAND booting Makfile needs to be adapted accordingly.
29256 Signed-off-by: Stefan Roese <sr@denx.de>
29258 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
29259 Author: Stefan Roese <sr@denx.de>
29260 Date: Wed Oct 31 20:57:11 2007 +0100
29262 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
29264 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
29265 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
29266 boards by defining CONFIG_4xx_DCACHE in the board config file. This
29267 option will disappear, when more boards use is successfully and no
29268 more known problems exist.
29270 This is tested successfully on Sequoia and Katmai. The only problem that
29271 needs to be fixed is, that USB is not working on Sequoia right now, since
29272 it will need some cache handling code too, similar to the 4xx EMAC driver.
29274 Signed-off-by: Stefan Roese <sr@denx.de>
29276 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
29277 Author: Stefan Roese <sr@denx.de>
29278 Date: Wed Oct 31 20:51:10 2007 +0100
29280 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
29282 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
29283 disable the cache for the CPU POST tests, since these tests consist
29284 of self modifying code. This is done via the new change_tlb() function.
29286 Signed-off-by: Stefan Roese <sr@denx.de>
29288 commit f71b2888b4b3c870909a0341427b2a914246f81f
29289 Author: Stefan Roese <sr@denx.de>
29290 Date: Wed Oct 31 20:47:26 2007 +0100
29292 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
29294 This patch enables the 4xx EMAC POST driver to work too, when dcache is
29297 Signed-off-by: Stefan Roese <sr@denx.de>
29299 commit a2685904061b35a17583d65fe47cdc2686a69eaa
29300 Author: Stefan Roese <sr@denx.de>
29301 Date: Wed Oct 31 20:45:53 2007 +0100
29303 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
29305 Signed-off-by: Stefan Roese <sr@denx.de>
29307 commit ff768cb168d8157c24a25016dbfbeb465e47f420
29308 Author: Stefan Roese <sr@denx.de>
29309 Date: Wed Oct 31 18:01:24 2007 +0100
29311 ppc4xx: Change 4xx ethernet driver to handle cached memory too
29313 This patch enables the 4xx EMAC driver to work too, when dcache is
29316 Signed-off-by: Stefan Roese <sr@denx.de>
29318 commit 483e09a223c666269ef81d3573a6591b1046b0ef
29319 Author: Stefan Roese <sr@denx.de>
29320 Date: Wed Oct 31 17:59:22 2007 +0100
29322 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
29324 This function is used to either turn cache on or off in a specific
29327 Signed-off-by: Stefan Roese <sr@denx.de>
29329 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
29330 Author: Stefan Roese <sr@denx.de>
29331 Date: Wed Oct 31 17:57:52 2007 +0100
29333 ppc4xx: Remove cache definition from 4xx board config files
29335 All 4xx board config files don't need the cache definitions anymore.
29336 These are now defined in common headers.
29338 Signed-off-by: Stefan Roese <sr@denx.de>
29340 commit 9b94ac61d2176185c30adf0793e079ec30e68687
29341 Author: Stefan Roese <sr@denx.de>
29342 Date: Wed Oct 31 17:55:58 2007 +0100
29344 ppc4xx: Rework 4xx cache support
29346 New cache handling functions added and all existing functions
29347 moved from start.S into seperate cache.S.
29349 Signed-off-by: Stefan Roese <sr@denx.de>
29351 commit 06713773da4ac3d390c63d82641eb553224b27c2
29352 Author: Stefan Roese <sr@denx.de>
29353 Date: Tue Oct 23 18:03:12 2007 +0200
29355 ppc4xx: Remove compiler warning from previous commit
29357 Signed-off-by: Stefan Roese <sr@denx.de>
29359 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
29360 Author: Stefan Roese <sr@denx.de>
29361 Date: Tue Oct 23 14:40:30 2007 +0200
29363 ppc4xx: Remove temporary TLB entry in POST cache test
29365 Signed-off-by: Stefan Roese <sr@denx.de>
29367 commit 1338e6a81834099ba19733b69aafd8ef5f098094
29368 Author: Stefan Roese <sr@denx.de>
29369 Date: Tue Oct 23 14:05:08 2007 +0200
29371 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
29373 I lately noticed, that newer 4xx board with GBit support sometimes don't
29374 finish link autonegotiation in 4 seconds. Changing this timeout to 5
29375 seconds seems fine here.
29377 Signed-off-by: Stefan Roese <sr@denx.de>
29379 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
29380 Author: Stefan Roese <sr@denx.de>
29381 Date: Tue Oct 23 14:03:17 2007 +0200
29383 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
29385 This patch changes all in32/out32 calls to use the recommended in_be32/
29386 out_be32 macros instead.
29388 Signed-off-by: Stefan Roese <sr@denx.de>
29390 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
29391 Author: Stefan Roese <sr@denx.de>
29392 Date: Thu Oct 25 12:24:59 2007 +0200
29394 ppc4xx: Fix POST ethernet test for Haleakala
29396 The POST ethernet test needed to be changed to dynamically determine
29397 the count of ethernet devices. This code is cloned from the 4xx
29400 Signed-off-by: Stefan Roese <sr@denx.de>
29402 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
29403 Author: Stefan Roese <sr@denx.de>
29404 Date: Tue Oct 23 11:31:05 2007 +0200
29406 ppc4xx: Correct UART input clock calculation and passing to fdt
29408 We now use a value in the gd (global data) structure for the UART input
29409 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
29412 Signed-off-by: Stefan Roese <sr@denx.de>
29414 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
29415 Author: Stefan Roese <sr@denx.de>
29416 Date: Tue Oct 23 10:10:08 2007 +0200
29418 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
29420 The Haleakala is nearly identical with the Kilauea eval board. The only
29421 difference is that the 405EXr only supports one EMAC and one PCIe
29422 interface. This patch adds support for the Haleakala board by using
29423 the identical image for Kilauea and Haleakala. The distinction is done
29424 by comparing the PVR.
29426 Signed-off-by: Stefan Roese <sr@denx.de>
29428 commit 9f798766aa85e62eb8fa8c721e148df609b78137
29429 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
29430 Date: Tue Oct 23 08:29:10 2007 +0200
29432 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
29434 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
29437 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
29438 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
29439 modules are still plugged in. So it is recommended to remove the DIMM
29440 modules while using the NAND booting code with the fixed SDRAM setup!
29442 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
29443 Signed-off-by: Stefan Roese <sr@denx.de>
29445 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
29446 Author: Stefan Roese <sr@denx.de>
29447 Date: Mon Oct 22 16:24:44 2007 +0200
29449 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
29451 Signed-off-by: Stefan Roese <sr@denx.de>
29453 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
29454 Author: Stefan Roese <sr@denx.de>
29455 Date: Mon Oct 22 16:22:40 2007 +0200
29457 ppc4xx: Rework of 4xx serial driver (4)
29461 - Use in_8/out_8 macros instead of in8/out8
29462 - No need for UART_BASE marco anymore, now really handled via function
29464 - serial_init_common() introduced
29465 - Further coding style cleanup
29467 Signed-off-by: Stefan Roese <sr@denx.de>
29469 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
29470 Author: Stefan Roese <sr@denx.de>
29471 Date: Mon Oct 22 15:45:49 2007 +0200
29473 ppc4xx: Rework of 4xx serial driver (3)
29475 Change all linker scripts to reference the changed driver name iop480_uart.o.
29477 Signed-off-by: Stefan Roese <sr@denx.de>
29479 commit 882ae41274921f9016131806bdeb27e19606f47a
29480 Author: Stefan Roese <sr@denx.de>
29481 Date: Mon Oct 22 15:44:39 2007 +0200
29483 ppc4xx: Rework of 4xx serial driver (2)
29485 Change all linker scripts to reference the changed driver name 4xx_uart.o.
29487 Note: In most cased all these explicit referencing of these object files
29488 in the linker scripts is not neccessary. Only for manually embedded
29489 environment into the U-Boot image, which is not done is most cases.
29491 Signed-off-by: Stefan Roese <sr@denx.de>
29493 commit ad31e40bed042cb670d0036fea96435007afb838
29494 Author: Stefan Roese <sr@denx.de>
29495 Date: Mon Oct 22 15:09:59 2007 +0200
29497 ppc4xx: Rework of 4xx serial driver (1)
29499 This patch starts the rework of the PPC4xx serial driver. First we split
29500 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
29501 handling code and the other one iop480_uart.c with the UART code for the
29502 PLX-Tech IOP480 PPC (PPC403 based).
29504 Signed-off-by: Stefan Roese <sr@denx.de>
29506 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
29507 Author: Stefan Roese <sr@denx.de>
29508 Date: Mon Oct 22 10:30:38 2007 +0200
29510 ppc4xx: Correct UART input clock calculation and passing to fdt
29512 Signed-off-by: Stefan Roese <sr@denx.de>
29514 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
29515 Author: Stefan Roese <sr@denx.de>
29516 Date: Mon Oct 22 07:34:34 2007 +0200
29518 ppc4xx: Add initial AMCC Makalu 405EX support
29520 Signed-off-by: Stefan Roese <sr@denx.de>
29522 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
29523 Author: Stefan Roese <sr@denx.de>
29524 Date: Mon Oct 22 07:33:52 2007 +0200
29526 ppc4xx: Add freqUART to CPU speed detection
29528 This value is needed later for the device tree configuration of
29531 Signed-off-by: Stefan Roese <sr@denx.de>
29533 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
29534 Author: Stefan Roese <sr@denx.de>
29535 Date: Sun Oct 21 14:26:29 2007 +0200
29537 ppc: Small Kilauea cleanup of config file
29539 Signed-off-by: Stefan Roese <sr@denx.de>
29541 commit 758c037aeead34b49631b8da3a90b1bba14c0410
29542 Author: Stefan Roese <sr@denx.de>
29543 Date: Sun Oct 21 08:16:12 2007 +0200
29545 rtc: Add Xicor/Intersil X1205 RTC support
29547 This patch adds support for the Xicor/Intersil X1205 RTC used on the
29548 AMCC Makalu eval board. This driver is basically cloned from the Linux
29549 driver version (2.6.23).
29551 This patch also introduces the Linux bcd.h header for the BCD2BIN/
29552 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
29553 should be converted to also use this header instead of implementing
29554 their own local copy of these functions/macros.
29556 Signed-off-by: Stefan Roese <sr@denx.de>
29558 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
29559 Author: Stefan Roese <sr@denx.de>
29560 Date: Sun Oct 21 08:12:41 2007 +0200
29562 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
29564 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
29565 PPC440_SYS_INFO structure into the common ppc4xx.h header.
29567 Lot's of other macros are good candidates to be consolidated this way
29570 Signed-off-by: Stefan Roese <sr@denx.de>
29572 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
29573 Author: Stefan Roese <sr@denx.de>
29574 Date: Sun Oct 21 08:05:18 2007 +0200
29576 ppc4xx: Fix size setup in Kilauea DDR2 init routine
29578 The size was initilized wrong. Instead of 256MB, the DDR2 controller
29579 was setup to 512MB. Now the correct values is used.
29581 This patch also does a little cleanup and adds a comment here.
29583 Signed-off-by: Stefan Roese <sr@denx.de>
29585 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
29586 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
29587 Date: Thu Oct 18 17:29:04 2007 +0200
29589 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
29591 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
29592 number is used to access system registers.
29594 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
29595 Signed-off-by: Stefan Roese <sr@denx.de>
29597 commit c36c68160333ac5fe41ec3db12a728b7075b3912
29598 Author: Stefan Roese <sr@denx.de>
29599 Date: Thu Oct 18 07:42:27 2007 +0200
29601 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
29603 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
29604 is the internal SRAM. Since I now ported and tested this endpoint mode
29605 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
29608 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
29611 Signed-off-by: Stefan Roese <sr@denx.de>
29613 commit 5cb4af4791f61843432155142b6cfac901f66c10
29614 Author: Stefan Roese <sr@denx.de>
29615 Date: Thu Oct 18 07:39:38 2007 +0200
29617 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
29619 This patch adds endpoint support for the AMCC Kilauea eval board. It can
29620 be tested by connecting a reworked PCIe cable (only 1x lane singles
29621 connected) to another root-complex.
29623 In this test setup, a 64MB inbound window is configured at BAR0 which maps
29624 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
29625 access the first 64MB of the SDRAM on the PPC side.
29627 Signed-off-by: Stefan Roese <sr@denx.de>
29629 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
29630 Author: Stefan Roese <sr@denx.de>
29631 Date: Sat Oct 13 16:43:23 2007 +0200
29633 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
29635 This patch adds support for dynamic configuration of PCIe ports for the
29636 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
29637 boards Yucca & Katmai and the 405EX board Kilauea.
29639 This dynamic configuration is done via the "pcie_mode" environement
29640 variable. This variable can be set to "EP" or "RP" for endpoint or
29641 rootpoint mode. Multiple values can be joined via the ":" delimiter.
29646 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
29649 Per default Yucca will be configured as:
29652 Per default Katmai will be configured as:
29653 pcie_mode=RP:RP:REP
29655 Per default Kilauea will be configured as:
29658 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
29659 Signed-off-by: Stefan Roese <sr@denx.de>
29661 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
29662 Author: Stefan Roese <sr@denx.de>
29663 Date: Thu Oct 11 11:15:59 2007 +0200
29665 ppc4xx: Enable device tree support (fdt) on Kilauea per default
29667 This patch enables the fdt support on the AMCC Kilauea eval board.
29668 Additionally now EBC ranges fdt fixup is included to support NOR
29669 FLASH mapping via the Linux physmap_of driver.
29671 This Kilauea port now support booting arch/ppc and arch/powerpc
29672 Linux kernels. The default environment "net_nfs" is for arch/ppc
29673 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
29674 support will be removed.
29676 Signed-off-by: Stefan Roese <sr@denx.de>
29678 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
29679 Author: Stefan Roese <sr@denx.de>
29680 Date: Thu Oct 11 11:11:45 2007 +0200
29682 ppc4xx: Add additional debug info to 4xx fdt support
29684 Signed-off-by: Stefan Roese <sr@denx.de>
29686 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
29687 Author: Stefan Roese <sr@denx.de>
29688 Date: Fri Oct 5 21:28:58 2007 +0200
29690 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
29692 Signed-off-by: Stefan Roese <sr@denx.de>
29694 commit 1941cce71b1ae975602854045061e82f94ecd012
29695 Author: Stefan Roese <sr@denx.de>
29696 Date: Fri Oct 5 17:35:10 2007 +0200
29698 ppc4xx: Fix small merge problem in 4xx_enet.c
29700 Signed-off-by: Stefan Roese <sr@denx.de>
29702 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
29703 Author: Stefan Roese <sr@denx.de>
29704 Date: Fri Oct 5 17:11:30 2007 +0200
29706 ppc4xx: Add initial AMCC Kilauea 405EX support
29708 Signed-off-by: Stefan Roese <sr@denx.de>
29710 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
29711 Author: Stefan Roese <sr@denx.de>
29712 Date: Fri Oct 5 17:10:59 2007 +0200
29714 ppc4xx: Add PPC405EX support
29716 Signed-off-by: Stefan Roese <sr@denx.de>
29718 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
29719 Author: Stefan Roese <sr@denx.de>
29720 Date: Fri Oct 5 17:09:36 2007 +0200
29722 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
29724 Signed-off-by: Stefan Roese <sr@denx.de>
29726 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
29727 Author: Stefan Roese <sr@denx.de>
29728 Date: Fri Oct 5 17:07:50 2007 +0200
29730 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
29732 Signed-off-by: Stefan Roese <sr@denx.de>
29734 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
29735 Author: Stefan Roese <sr@denx.de>
29736 Date: Fri Oct 5 17:04:57 2007 +0200
29738 POST: Add 405EX support to 4xx UART POST test
29740 Signed-off-by: Stefan Roese <sr@denx.de>
29742 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
29743 Author: Stefan Roese <sr@denx.de>
29744 Date: Fri Oct 5 15:10:02 2007 +0200
29746 DTT: Prepare DS1775 driver for use of different I2C addresses
29748 Signed-off-by: Stefan Roese <sr@denx.de>
29750 commit 19e93b1e16d267220440d827b920fbad8abfa70f
29751 Author: Stefan Roese <sr@denx.de>
29752 Date: Fri Oct 5 14:23:43 2007 +0200
29754 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
29756 Signed-off-by: Stefan Roese <sr@denx.de>
29758 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
29759 Author: Stefan Roese <sr@denx.de>
29760 Date: Fri Oct 5 09:22:33 2007 +0200
29762 ppc4xx: 4xx_pcie: Disable debug output as default
29764 Signed-off-by: Stefan Roese <sr@denx.de>
29766 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
29767 Author: Stefan Roese <sr@denx.de>
29768 Date: Fri Oct 5 09:18:23 2007 +0200
29770 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
29772 Signed-off-by: Stefan Roese <sr@denx.de>
29774 commit 4dbee8a90df613eb517aadbecebd70f168913d30
29775 Author: Stefan Roese <sr@denx.de>
29776 Date: Fri Oct 5 07:57:20 2007 +0200
29778 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
29780 128MB seems to be the smallest possible value for the memory size
29781 for on PCIe port. With this change now the BAR's of the PCIe cards
29782 are accessible under U-Boot.
29784 One big note: This only works for PCIe port 0 & 1. For port 2 this
29785 currently doesn't work, since the base address is now 0xc0000000
29786 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
29787 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
29788 to change the base addresses completely and this change would have
29789 too much impact right now.
29791 This patch adds debug output to the 4xx pcie driver too.
29793 Signed-off-by: Stefan Roese <sr@denx.de>
29795 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
29796 Author: Stefan Roese <sr@denx.de>
29797 Date: Wed Oct 3 21:16:32 2007 +0200
29799 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
29801 Signed-off-by: Stefan Roese <sr@denx.de>
29803 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
29804 Author: Stefan Roese <sr@denx.de>
29805 Date: Wed Oct 3 15:01:02 2007 +0200
29807 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
29809 These files were introduced with the IBM 405GP but are currently used on all
29810 4xx PPC platforms. So the name doesn't match the content anymore. This patch
29811 renames the files to 4xx_pci.c/h.
29813 Signed-off-by: Stefan Roese <sr@denx.de>
29815 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
29816 Author: Stefan Roese <sr@denx.de>
29817 Date: Wed Oct 3 14:14:58 2007 +0200
29819 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
29821 Signed-off-by: Stefan Roese <sr@denx.de>
29823 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
29824 Author: Stefan Roese <sr@denx.de>
29825 Date: Wed Oct 3 10:38:09 2007 +0200
29827 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
29829 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
29830 the SDR registers of the PCIe ports. This makes the overall design
29831 clearer, since it removed a lot of switch statements which are not
29834 Also, the functions ppc4xx_init_pcie_rootport() and
29835 ppc4xx_init_pcie_entport() are merged into a single function
29836 ppc4xx_init_pcie_port(), since most of the code was duplicated.
29837 This makes maintainance and porting to other 4xx platforms
29840 Signed-off-by: Stefan Roese <sr@denx.de>
29842 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
29843 Author: Stefan Roese <sr@denx.de>
29844 Date: Wed Oct 3 07:48:09 2007 +0200
29846 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
29848 This patch is the first patch of a series to make the 440SPe PCIe code
29849 usable on different 4xx PPC platforms. In preperation for the new 405EX
29850 which is also equipped with PCIe interfaces.
29852 (2) This patch renames the functions from 440spe_ to 4xx_ with a
29853 little additional cleanup
29855 Signed-off-by: Stefan Roese <sr@denx.de>
29857 commit c7c6da23028f146d912514b95aefa3da7cf37699
29858 Author: Stefan Roese <sr@denx.de>
29859 Date: Wed Oct 3 07:34:10 2007 +0200
29861 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
29863 This patch is the first patch of a series to make the 440SPe PCIe code
29864 usable on different 4xx PPC platforms. In preperation for the new 405EX
29865 which is also equipped with PCIe interfaces.
29867 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
29869 Signed-off-by: Stefan Roese <sr@denx.de>
29871 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
29872 Author: Marian Balakowicz <m8@semihalf.com>
29873 Date: Wed Oct 24 01:37:36 2007 +0200
29875 TQM5200: Call usb_cpu_init() during board init
29877 usb_cpu_init() configures GPS USB pins, clocks, etc. and
29878 is required for proper operation of kernel USB subsystem.
29879 This setup was previously done in the kernel by the fixup
29880 code which is being removed, thus low level init must be
29881 done by U-boot now.
29883 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
29884 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29886 commit b5af773f8d92677e06f3295b45557c9d0a487c24
29887 Author: Zhang Wei <wei.zhang@freescale.com>
29888 Date: Thu Oct 25 17:51:27 2007 +0800
29890 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
29892 The scan code of the key 'z' is 0x1d, which should be handled.
29894 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
29897 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
29898 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29900 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
29901 Author: Rodolfo Giometti <giometti@enneenne.com>
29902 Date: Mon Oct 15 11:59:17 2007 +0200
29904 PXA USB OHCI: "usb stop" implementation.
29906 Some USB keys need to be switched off before loading the kernel
29907 otherwise they can remain in an undefined status which prevents them
29908 to be correctly recognized by the kernel.
29910 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
29911 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29913 commit 31548249decf18a6b877a18436b6139dd483fe4a
29914 Author: Justin Flammia <jflammia@savantav.com>
29915 Date: Mon Oct 29 17:40:35 2007 -0400
29919 This is a multi-part message in MIME format.
29921 commit e6e505eae94ed721e123e177489291fc4544b7b8
29922 Author: Justin Flammia <jflammia@savantav.com>
29923 Date: Mon Oct 29 17:19:03 2007 -0400
29925 Found a bug in the way the DHCP Request packet is built, where the IP address
29926 that is offered by the server is bound to prematurely. This patch is a fix of
29927 that bug where the IP address offered by the DHCP server is not used until
29928 after the DHCP ACK from the server is received.
29930 Signed-off-by: Justin Flammia <jflammia@savantav.com>
29931 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29933 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
29934 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29935 Date: Thu Oct 25 17:16:22 2007 -0500
29937 ColdFire 54455: Fix correct boot location for atmel and intel
29939 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29941 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
29942 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29943 Date: Thu Oct 25 17:14:00 2007 -0500
29945 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
29947 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29949 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
29950 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29951 Date: Thu Oct 25 17:12:36 2007 -0500
29953 ColdFire 5329: Assign correct SDRAM size and fix cache
29955 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29957 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
29958 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29959 Date: Thu Oct 25 17:10:23 2007 -0500
29961 ColdFire 5253: Assign correct SDRAM size
29963 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29965 commit 2acefa72ee0026f862ab65597ca687428f63a973
29966 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29967 Date: Thu Oct 25 17:09:17 2007 -0500
29969 ColdFire 5282: Fix external flash boot and return dramsize
29971 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29973 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
29974 Author: Bartlomiej Sieka <tur@semihalf.com>
29975 Date: Thu Oct 25 17:20:01 2007 +0200
29977 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
29979 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
29981 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
29982 Author: Martin Krause <martin.krause@tqs.de>
29983 Date: Wed Oct 24 08:42:25 2007 +0200
29985 TQM5200: fix spurious characters on second serial interface
29987 With this patch PSC3 is configured as UART. This is done, because if
29988 the pins of PSC3 are not configured at all (-> all pins are GPI),
29989 due to crosstalk, spurious characters may be send over the RX232_2_TXD
29992 Signed-off-by: Martin Krause <martin.krause@tqs.de>
29993 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
29995 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
29996 Author: Martin Krause <martin.krause@tqs.de>
29997 Date: Wed Oct 24 08:41:27 2007 +0200
29999 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
30001 Some commands for the STK52xx base board try to access the SM501 grafic
30002 controller. But the TQM5200S has no grafic controller (only the TQM5200
30003 and the TQM5200B have). This patch deactivates the commands accessing
30004 the SM501 for the TQM5200S.
30006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30007 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30009 commit b31f64343ead9482cd439b1adbe4c34026a641b1
30010 Author: Martin Krause <martin.krause@tqs.de>
30011 Date: Mon Oct 22 16:45:53 2007 +0200
30013 TQM5200: fix spurious characters on second serial interface
30015 With this patch PSC3 is configured as UART. This is done, because if
30016 the pins of PSC3 are not configured at all (-> all pins are GPI),
30017 due to crosstalk, spurious characters may be send over the RX232_2_TXD
30020 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30022 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
30023 Author: Martin Krause <martin.krause@tqs.de>
30024 Date: Mon Oct 22 16:40:06 2007 +0200
30026 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
30028 Some commands for the STK52xx base board try to access the SM501 grafic
30029 controller. But the TQM5200S has no grafic controller (only the TQM5200
30030 and the TQM5200B have). This patch deactivates the commands accessing
30031 the SM501 for the TQM5200S.
30033 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30035 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
30036 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30037 Date: Sun Oct 21 09:14:28 2007 +0200
30039 Mips: Fix string functions differ prototype declaration
30041 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30043 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
30044 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
30045 Date: Fri Oct 19 17:51:40 2007 -0500
30047 fsl_pci_init enable COMMAND_MEMORY if inbound window
30049 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
30050 to pciauto_setup_device has the side effect of not getting
30051 COMMAND_MEMORY set.
30053 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30055 commit e9d0d527992566ebef9826962ff1745b2f082b92
30056 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30057 Date: Fri Oct 19 10:55:24 2007 +0200
30059 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
30061 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30063 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
30064 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30065 Date: Fri Oct 19 08:10:15 2007 +0200
30067 fix warning: no return statement in function returning non-void
30069 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30071 commit e78220f6e514206757acfe247297fc9a328a881f
30072 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30073 Date: Fri Oct 19 06:33:45 2007 +0200
30075 xsengine: Fix no partition type specified, use DOS as default
30077 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30079 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
30080 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30081 Date: Fri Oct 19 00:24:59 2007 +0200
30083 lubbock: Fix no partition type specified, use DOS as default
30085 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30087 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
30088 Author: Wolfgang Denk <wd@denx.de>
30089 Date: Tue Oct 23 16:50:03 2007 +0200
30091 Coding style: keep lists sorted; update CHANGELOG
30093 Signed-off-by: Wolfgang Denk <wd@denx.de>
30095 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
30096 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30097 Date: Fri Oct 19 00:09:05 2007 +0200
30099 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
30101 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30103 commit 96455bfebc9887837095c9051d216f53c61b5f10
30104 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30105 Date: Fri Oct 19 00:07:39 2007 +0200
30107 Fix warning differ in signedness in board/innokom/innokom.c
30109 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30111 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
30112 Author: Marcel Ziswiler <marcel@ziswiler.com>
30113 Date: Fri Oct 19 00:25:33 2007 +0200
30115 fix pxa255_idp board
30117 The pxa255_idp being an old unmaintained board showed several issues:
30118 1. CONFIG_INIT_CRITICAL was still defined.
30119 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
30120 3. Symbol flash_addr was undeclared.
30121 4. The boards lowlevel_init function was still called memsetup.
30122 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
30123 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
30124 'target CPU does not support interworking' warnings on recent compilers.
30125 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
30126 indexes rather than the register definitions from the pxa-regs header
30127 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
30128 avoid any ambiguities.
30129 8. There were several redefinition warnings concerning ICMR, OSMR3,
30130 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
30131 9. The board configuration file was rather outdated.
30132 10. The part header file defined the vendor, product and revision arrays
30133 as unsigned chars instead of just chars in the block_dev_desc_t
30136 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30138 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
30139 Author: Rune Torgersen <runet@innovsys.com>
30140 Date: Wed Oct 17 11:56:31 2007 -0500
30142 Make MPC8266ADS command selection more robust
30144 Fix MPC8266 command line definition so it won't break when new commands
30145 are added to u-boot.
30146 Signed-off-by Rune Torgersen <runet@innovsys.com>
30148 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
30149 Author: Bartlomiej Sieka <tur@semihalf.com>
30150 Date: Tue Oct 23 13:14:10 2007 +0200
30152 Motion-PRO: Update configuration to accomodate next generation board.
30154 New board has faster oscillator and a different Flash chip. This affects:
30155 - CFG_MPC5XXX_CLKIN
30157 - Flash CS configuration (timings)
30158 - Flash sector size, and thus MTD partition layout
30159 - malloc() arena size (due to bigger Flash sectors)
30160 - smaller memory test range (due to bigger malloc() arena)
30162 This patch also enables more extensive memory testing via "mtest".
30164 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30166 commit eff501904df2bf1724a750062628ba2c51dbb1f8
30167 Author: Bartlomiej Sieka <tur@semihalf.com>
30168 Date: Tue Oct 23 11:36:07 2007 +0200
30170 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
30172 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
30173 register must be written a value of 0x00000004 as the first step of the
30174 SDRAM contorller configuration.
30176 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30178 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
30179 Author: Peter Pearse <peter.pearse@arm.com>
30180 Date: Tue Oct 23 10:22:16 2007 +0100
30182 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
30184 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
30185 Author: Stefan Roese <sr@denx.de>
30186 Date: Tue Oct 23 10:17:42 2007 +0200
30188 ppc4xx: lwmon5: Some further GPIO config changes
30190 Signed-off-by: Stefan Roese <sr@denx.de>
30192 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
30193 Author: Vlad Lungu <vlad@comsys.ro>
30194 Date: Sun Oct 21 22:10:10 2007 +0900
30196 [MIPS] Fix UNCACHED_SDRAM
30198 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
30200 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30201 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30203 commit 00101dd7a32d12f698150123e47e4b3420279f86
30204 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30205 Date: Sun Oct 21 21:30:42 2007 +0900
30207 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
30209 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30211 commit eb700636db017d310edaeb559b13d82588560674
30212 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30213 Date: Sun Oct 21 10:55:37 2007 +0900
30215 [MIPS] u-boot.lds: Define _gp in a standard manner
30217 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30219 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
30220 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30221 Date: Sun Oct 21 10:55:36 2007 +0900
30223 [MIPS] Fix $gp usage
30225 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
30226 As a general principle, we should use _gp for $gp.
30228 Thanks to linker script's help we fortunately have _gp which equals to
30229 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
30230 be able to access to GOT entires, global variables and procedure entry
30231 points. The right thing to do is to use _gp.
30233 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
30234 which holds the offset from _gp. When updating GOT entries, we use this
30235 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
30237 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
30238 I made some change to leave over num_got_entries.
30240 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30241 Cc: Vlad Lungu <vlad@comsys.ro>
30243 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
30244 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30245 Date: Sun Oct 21 10:55:36 2007 +0900
30247 [MIPS] u-boot.lds: Fix __got_start and __got_end
30249 Ensure that __got_start points to top of the `.got', and __got_end points
30250 to bottom as well, so that we never fail to count num_got_entries.
30252 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30254 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
30255 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30256 Date: Sun Oct 21 10:55:36 2007 +0900
30258 [MIPS] u-boot.lds: Remove duplicated .sdata section
30260 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30262 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
30263 Author: Wolfgang Denk <wd@denx.de>
30264 Date: Sun Oct 21 01:01:17 2007 +0200
30266 Minor coding style cleanup; update CHANGELOG
30268 Signed-off-by: Wolfgang Denk <wd@denx.de>
30270 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
30271 Author: Vlad Lungu <vlad@comsys.ro>
30272 Date: Thu Oct 4 20:47:10 2007 +0300
30276 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
30277 to do anything in eth_stop() if eth_init() was not called.
30278 Simplified RX path in order to avoid timeouts on really really
30279 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
30280 clever enough to cope with 1 packet per eth_rx().
30282 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30284 commit df90968b48fb34fa9072fab150db2ac89678f537
30285 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
30286 Date: Mon Sep 24 13:32:13 2007 -0400
30288 Setting MSR[DE] in do_reset
30291 This patch ensures the soft reset of the board for the 85xx boards
30292 by setting the MSR[DE] in the do_reset function.
30294 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
30296 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
30297 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
30298 Date: Mon Sep 24 13:36:01 2007 -0400
30303 This patch fixes the MSR overwrite in the start.S when moving out of
30306 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
30308 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
30309 Author: Dan Wilson <dwilson@fulcrummicro.com>
30310 Date: Fri Oct 19 11:33:48 2007 -0500
30312 tsec driver should clear RHALT on startup
30314 This was causing problems for some people.
30316 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
30317 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
30318 Signed-off-by: Andy Fleming <afleming@freescale.com>
30320 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
30321 Author: Kumar Gala <galak@kernel.crashing.org>
30322 Date: Thu Oct 11 00:29:18 2007 -0500
30324 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
30326 On the MPC85xx CDS we have two issues:
30328 1. The device tree fixup code did not check to see if the property we are
30329 trying to update is actually found. Its possible that it would update
30330 random memory starting at 0.
30332 2. Newer Linux kernel's have moved the location of the PCI nodes to be
30333 sibilings of the soc node and not children. The explicit PATH to the PCI
30334 node would not be found for these device trees. Add the ability to handle
30335 both paths. In the future we shouldn't handle such fixups by explicit path.
30337 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30339 commit a3063eec775719b7e91023bbec3f64b3118791df
30340 Author: Kumar Gala <galak@kernel.crashing.org>
30341 Date: Thu Oct 11 00:18:48 2007 -0500
30343 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
30345 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
30346 console. Make it so we match that config what we tell Linux as the early
30349 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30351 commit e1ce3cb617bb06f91f82f98915391175addf3e82
30352 Author: Kumar Gala <galak@kernel.crashing.org>
30353 Date: Tue Oct 2 11:12:27 2007 -0500
30355 Remove magic numbers from cache related operations for mpc85xx
30357 The mpc85xx start code uses some magic numbers that we actually
30358 have #defines for in <config.h> so use those instead.
30360 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30362 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
30363 Author: Detlev Zundel <dzu@denx.de>
30364 Date: Fri Oct 19 16:47:26 2007 +0200
30368 Signed-off-by: Detlev Zundel <dzu@denx.de>
30370 commit 281df457c1aa50d2752165d0c5c3282d4027b974
30371 Author: Tony Li <tony.li@freescale.com>
30372 Date: Thu Oct 18 17:47:19 2007 +0800
30374 mpc83xx: Add configure entry for MPC83xx ATM support
30376 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
30377 Makfile and MAKEALL
30379 Signed-off-by: Tony Li <tony.li@freescale.com>
30380 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30382 commit d2646554f529a9577515eceb0ec5eceee18244ba
30383 Author: Tony Li <tony.li@freescale.com>
30384 Date: Thu Oct 18 17:44:38 2007 +0800
30386 mpc83xx: pq-mds-pib.c typo error
30388 Correct to val8 from val.
30390 Signed-off-by: Tony Li <tony.li@freescale.com>
30391 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30393 commit 3e11ae80fec1ee12194940955431186abf6009c2
30394 Author: Stefan Roese <sr@denx.de>
30395 Date: Wed Oct 17 15:40:19 2007 +0200
30397 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
30399 Signed-off-by: Stefan Roese <sr@denx.de>
30401 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
30402 Author: Jon Loeliger <jdl@freescale.com>
30403 Date: Tue Oct 16 15:27:43 2007 -0500
30405 Initial mpc8610hpcd Makefile files.
30407 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30408 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
30409 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
30410 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30412 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
30413 Author: Jon Loeliger <jdl@freescale.com>
30414 Date: Tue Oct 16 15:26:51 2007 -0500
30416 Initial mpc8610hpcd cpu/, README and include/ files.
30418 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30419 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
30420 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
30421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30423 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
30424 Author: Jon Loeliger <jdl@freescale.com>
30425 Date: Tue Oct 16 13:54:01 2007 -0500
30427 Initial mpc8610hpcd board files.
30429 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30430 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
30431 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
30432 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30434 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
30435 Author: runet@innovsys.com <runet@innovsys.com>
30436 Date: Tue Oct 16 14:50:40 2007 -0500
30438 Make MPC8266ADS board compile again.
30440 Signed-off-by: Runet Torgersen <runet@innovsys.com>
30442 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
30443 Author: Jon Loeliger <jdl@freescale.com>
30444 Date: Mon Aug 27 12:41:03 2007 -0500
30446 86xx: Allow for fewer DDR slots per memory controller.
30448 As a direct correlation exists between DDR DIMM slots
30449 and SPD EEPROM addresses used to configure them, use
30450 the individually defined SPD_EEPROM_ADDRESS* values to
30451 determine if a DDR DIMM slot should have its SPD
30452 configuration read or not.
30454 Effectively, this now allows for 1 or 2 DIMM slots
30455 per memory controller.
30457 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30459 commit 4d4a945e189a2f384c66432316da2788a0ac1607
30460 Author: Rodolfo Giometti <giometti@enneenne.com>
30461 Date: Mon Oct 15 11:59:17 2007 +0200
30463 PXA USB OHCI: "usb stop" implementation.
30465 Some USB keys need to be switched off before loading the kernel
30466 otherwise they can remain in an undefined status which prevents them
30467 to be correctly recognized by the kernel.
30469 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
30471 commit e2e93442e558cf1500e92861f99713b2f045ea22
30472 Author: Stefan Roese <sr@denx.de>
30473 Date: Mon Oct 15 11:39:00 2007 +0200
30475 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
30477 The I2C bootstrap values that can be setup via the "bootstrap" command,
30478 were setup incorrect regarding the generation of the internal sync PCI
30479 clock. The values for PLB clock == 133MHz were slighly incorrect and the
30480 values for PLB clock == 166MHz were totally incorrect. This could
30481 lead to a hangup upon booting while PCI configuration scan.
30483 This patch fixes this issue and configures valid PCI divisor values
30484 for the sync PCI clock, with respect to the provided external async
30487 Here the values of the formula in the chapter 14.2 "PCI clocking"
30488 from the 440EPx users manual:
30490 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
30492 33MHz async PCI frequency:
30494 => 32 <= 44.3 <= 65 (div = 3)
30497 => 32 <= 55.3 <= 65 (div = 3)
30499 66MHz async PCI frequency:
30501 => 65 <= 66.5 <= 132 (div = 2)
30504 => 65 <= 83 <= 132 (div = 2)
30506 Signed-off-by: Stefan Roese <sr@denx.de>
30508 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
30509 Author: Stefan Roese <sr@denx.de>
30510 Date: Mon Oct 15 11:29:33 2007 +0200
30512 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
30514 The BCSR status bit for the 66MHz PCI operation was correctly
30515 addressed (MSB/LSB problem). Now the correct currently setup
30516 PCI frequency is displayed upon bootup.
30518 This patch also fixes this problem on Rainier & Yellowstone, since these
30519 boards use the same souce code as Sequoia & Yosemite do.
30521 Signed-off-by: Stefan Roese <sr@denx.de>
30523 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
30524 Author: Martin Krause <martin.krause@tqs.de>
30525 Date: Wed Sep 26 17:55:56 2007 +0200
30527 TQM860M: adjust for doubled flash sector size.
30529 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
30530 doubled sector size.
30532 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30534 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
30535 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
30536 Date: Wed Sep 26 17:55:54 2007 +0200
30538 TQM8xx: Fix CAN timing.
30540 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30542 commit d43e489baf02afae49077791fb22332d240d8656
30543 Author: Martin Krause <martin.krause@tqs.de>
30544 Date: Thu Sep 27 14:54:36 2007 +0200
30546 TQM866M: fix SDRAM refresh
30548 At 133 MHz the current SDRAM refresh rate is too fast
30549 (measured 4 * 1.17 us).
30550 CFG_MAMR_PTA changes from 39 to 97. This result
30551 in a refresh rate of 4 * 7.8 us at the default clock
30552 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
30553 This is a compromise until a new method is found to
30554 adjust the refresh rate.
30556 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30558 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
30559 Author: Martin Krause <martin.krause@tqs.de>
30560 Date: Wed Sep 26 17:55:55 2007 +0200
30562 TQM866M: adjust for doubled flash sector size.
30564 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
30565 doubled sector size.
30567 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30569 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
30570 Author: Michal Simek <monstr@monstr.eu>
30571 Date: Sun Oct 14 16:12:29 2007 +0200
30573 [FIX] XUPV2P change command handling
30574 and remove code violation
30576 commit 636400198228d96983c06657b17f760f5989958e
30577 Author: Wolfgang Denk <wd@denx.de>
30578 Date: Sun Oct 14 00:13:19 2007 +0200
30580 Prepare for 1.3.0-rc3 release
30582 Signed-off-by: Wolfgang Denk <wd@denx.de>
30584 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
30585 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30586 Date: Sat Sep 29 13:41:37 2007 +0200
30588 Fix warning differ in signedness in cpu/pxa/mmc.c
30590 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30592 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
30593 Author: Wolfgang Denk <wd@denx.de>
30594 Date: Sat Oct 13 23:51:14 2007 +0200
30596 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
30598 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30599 Signed-off-by: Wolfgang Denk <wd@denx.de>
30601 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
30602 Author: Wolfgang Denk <wd@denx.de>
30603 Date: Sat Oct 13 21:15:39 2007 +0200
30605 Coding Style cleanup.
30607 Signed-off-by: Wolfgang Denk <wd@denx.de>
30609 commit e1893815b0999410d7a327589611c7b38e95299e
30610 Author: Wolfgang Denk <wd@denx.de>
30611 Date: Fri Oct 12 15:49:39 2007 +0200
30613 GP3 SSA: enable RTC
30615 Signed-off-by: Wolfgang Denk <wd@denx.de>
30617 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
30618 Author: Grzegorz Bernacki <gjb@semihalf.com>
30619 Date: Tue Oct 9 13:58:24 2007 +0200
30621 [ads5121] EEPROM support added.
30623 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
30625 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
30626 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
30627 Date: Sat Oct 6 18:55:35 2007 +0200
30629 AVR32: Initialize bi_flash* in board_init_r
30631 The ATSTK1000-specific flash driver intializes bi_flashstart,
30632 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
30635 Initialize these in board_init_r instead so that things will still be
30636 set up correctly when we switch to the CFI driver.
30638 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30640 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
30641 Author: Marian Balakowicz <m8@semihalf.com>
30642 Date: Fri Oct 5 10:40:54 2007 +0200
30644 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
30646 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
30648 commit 92869195ef8210758d2176230c0a36897afd50ed
30649 Author: Bartlomiej Sieka <tur@semihalf.com>
30650 Date: Fri Oct 5 09:46:06 2007 +0200
30652 CM5200: Fix missing null-termination in hostname manipulation code
30654 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30656 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
30657 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
30658 Date: Tue Oct 2 19:09:01 2007 +0200
30660 Fix memtest breakage
30662 CFG_MEMTEST_START uses weird magic involving gd, which fails to
30663 compile. Use hardcoded values instead (we actually know how much RAM
30666 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30668 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
30669 Author: Stefan Roese <sr@denx.de>
30670 Date: Tue Oct 2 11:44:46 2007 +0200
30672 ppc4xx: Coding style cleanup
30674 Signed-off-by: Stefan Roese <sr@denx.de>
30676 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
30677 Author: Stefan Roese <sr@denx.de>
30678 Date: Tue Oct 2 11:44:19 2007 +0200
30680 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
30682 Signed-off-by: Stefan Roese <sr@denx.de>
30684 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
30685 Author: Grzegorz Bernacki <gjb@semihalf.com>
30686 Date: Mon Oct 1 09:51:50 2007 +0200
30688 Program EPLD to force full duplex mode for PHY.
30690 EPLD forces modes of PHY operation. By default full duplex is turned off.
30691 This fix turns it on.
30693 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
30695 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
30696 Author: Timo Ketola <timo.ketola@exertus.fi>
30697 Date: Mon Sep 24 14:50:32 2007 +0300
30699 Bugfix: Use only one PTD for one endpoint
30701 Original isp116x-hcd code prepared multiple PTDs for longer than 16
30702 byte transfers for one endpoint. That is unnecessary because the
30703 ISP116x is able to split long data from one PTD into multiple
30704 transactions based on the buffer size of the endpoint. It also caused
30705 serious problems if the endpoint NAKed some of the transactions. In
30706 that case ISP116x wouldn't notice that the other PTDs were for the same
30707 endpoint and would try the other PTDs possibly out of order. That would
30708 break the whole transfer.
30710 This patch makes isp116x_submit_job to use one PTD for one transfer.
30712 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
30713 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30715 commit 86ec86c04326c3913178a7679aa910de071da75d
30716 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30717 Date: Thu Sep 27 23:27:47 2007 +0200
30719 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
30721 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30723 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
30724 Author: Stefan Roese <sr@denx.de>
30725 Date: Tue Sep 11 14:12:55 2007 +0200
30727 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
30729 Signed-off-by: Stefan Roese <sr@denx.de>
30731 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
30732 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
30733 Date: Wed Sep 26 16:35:54 2007 -0500
30735 85xx io out functions need sync after write.
30737 This fixes the mc146818 rtc_read/write functions for 85xx.
30739 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30741 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
30742 Author: Grant Likely <grant.likely@secretlab.ca>
30743 Date: Tue Sep 25 15:48:05 2007 -0600
30745 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
30747 CFG_FPGA_XILINX is a bit value used to test against the value in
30748 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
30749 think that is the intention in this code.
30751 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30753 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
30754 Author: Michal Simek <monstr@monstr.eu>
30755 Date: Mon Sep 24 00:41:30 2007 +0200
30757 [FIX] change command handling and removing code violation
30759 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
30760 Author: Michal Simek <monstr@monstr.eu>
30761 Date: Mon Sep 24 00:36:06 2007 +0200
30763 [FIX] change sets of commands
30764 because changing of command handling brings
30765 compilation problems
30767 commit cb1bc63b75a232571eb69aa2c8aa919321655845
30768 Author: Michal Simek <monstr@monstr.eu>
30769 Date: Mon Sep 24 00:30:42 2007 +0200
30771 [FIX] Email reparation & Copyright
30772 Both codes are written by myself without any
30775 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
30776 Author: Michal Simek <monstr@monstr.eu>
30777 Date: Mon Sep 24 00:25:11 2007 +0200
30779 [PATCH] Change macro name for UartLite
30780 because PowerPC 405 can use UartLite as console
30782 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
30783 Author: Michal Simek <monstr@monstr.eu>
30784 Date: Mon Sep 24 00:21:19 2007 +0200
30786 [PATCH] Add support for design without interrupt controller
30789 commit 0731933ec8ec45d02ba89b52df673d526873cdde
30790 Author: Michal Simek <monstr@monstr.eu>
30791 Date: Mon Sep 24 00:19:48 2007 +0200
30793 [FIX] resolve problem with cpu without barrel shifter
30795 commit db14d77995ce515b728b178b63f82babe60e3d56
30796 Author: Michal Simek <monstr@monstr.eu>
30797 Date: Mon Sep 24 00:18:46 2007 +0200
30799 [FIX] repair email address
30801 commit 481d4328618804add1f818a6c96296121cd0528e
30802 Author: Michal Simek <monstr@monstr.eu>
30803 Date: Mon Sep 24 00:17:42 2007 +0200
30805 [FIX] repair MFSL commands
30807 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
30808 Author: Michal Simek <monstr@monstr.eu>
30809 Date: Mon Sep 24 00:08:37 2007 +0200
30811 synchronizition with mainline
30813 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
30814 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30815 Date: Sun Sep 23 02:42:38 2007 +0900
30817 sh: Add support command of ide with sh
30819 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30821 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
30822 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30823 Date: Sun Sep 23 02:38:42 2007 +0900
30825 sh: Update Makefile
30827 Add support MS7722SE01 to Makefile.
30829 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30831 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
30832 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30833 Date: Sun Sep 23 02:31:13 2007 +0900
30835 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
30837 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30839 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
30840 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30841 Date: Sun Sep 23 02:19:24 2007 +0900
30843 sh: Update MS7750SE01 platform
30845 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30847 commit 516ad760db3553766267ada01b7d5d727faa4bbd
30848 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30849 Date: Sun Sep 23 02:17:08 2007 +0900
30851 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
30853 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30855 commit b02bad128669e567fce87d8df823b06a0144b8db
30856 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30857 Date: Sun Sep 23 02:12:30 2007 +0900
30859 sh: Update core code of SuperH.
30861 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30863 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
30864 Author: Wolfgang Denk <wd@denx.de>
30865 Date: Thu Sep 20 00:04:14 2007 +0200
30869 Signed-off-by: Wolfgang Denk <wd@denx.de>
30871 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
30872 Author: Wolfgang Denk <wd@denx.de>
30873 Date: Tue Sep 18 21:36:35 2007 +0200
30875 Avoid compiler warning.
30877 Signed-off-by: Wolfgang Denk <wd@denx.de>
30879 commit 8a783a65851bc7421ab69f442261215e21b8891a
30880 Author: Grant Likely <grant.likely@secretlab.ca>
30881 Date: Tue Sep 18 12:24:57 2007 -0600
30883 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
30885 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
30886 nulls in a string differently. For example, the following statement:
30887 echo "this is a string\0" > afile
30888 Will produce the following with /bin/bash:
30889 "this is a string\0"
30890 But with /bin/dash, will produce:
30893 Bug fixed by moving the embedded null out of the makefile and into the
30894 config header. Also renamed the macro to avoid usage colision with the same
30895 macro used by other board ports.
30897 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30899 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
30900 Author: Wolfgang Denk <wd@denx.de>
30901 Date: Tue Sep 18 17:40:27 2007 +0200
30903 MCC200: fix build warning
30905 The MCC200 board config file includes version.h for some customer-
30906 specific setting, which causes warnings with "make depend"; build
30907 version.h before depend.
30909 Signed-off-by: Wolfgang Denk <wd@denx.de>
30911 commit bd86220f58b99d6896198c385fda132f0c980915
30912 Author: Peter Pearse <peter.pearse@arm.com>
30913 Date: Tue Sep 18 13:07:54 2007 +0100
30915 Move coloured led API to status_led.h
30916 Improve indentation in drivers/at45.c
30918 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
30919 Author: Eirik Aanonsen <eaa@wprmedical.com>
30920 Date: Tue Sep 18 08:47:20 2007 +0200
30922 Update atstk1002 bootargs.
30924 Updates to atstk1002 U-Boot header file:
30925 - Changed bootargs:
30926 * Set the bootargs for at1002 to point to the SD-card partition instead
30927 * ... of the boot flash.
30928 * Removing the rootfstype since that argument are not needed.
30930 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
30931 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30933 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
30934 Author: Eirik Aanonsen <eaa@wprmedical.com>
30935 Date: Wed Sep 12 13:32:37 2007 +0200
30937 Add some comments to clocks in atstk1002.h
30939 This patch applies some clarifying comments to how the different
30940 clocks are setup according to atstk1002.h Some of the previous
30941 comments where stating wrongful information.
30943 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30945 commit 97213f32416ead885deafea86774e912ffd60ad0
30946 Author: David Saada <David.Saada@ecitele.com>
30947 Date: Mon Sep 17 17:04:47 2007 +0200
30949 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
30951 Signed-off-by: David Saada <david.saada@ecitele.com>
30953 commit 30363e98fa470fbecea5e8bc0f1443352754f303
30954 Author: Stefan Roese <sr@denx.de>
30955 Date: Mon Sep 17 08:20:47 2007 +0200
30957 Small whitespace cleanup of OneNAND patch
30959 Signed-off-by: Stefan Roese <sr@denx.de>
30961 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
30962 Author: Kyungmin Park <kmpark@infradead.org>
30963 Date: Mon Sep 10 17:15:14 2007 +0900
30965 OneNAND support (take #2)
30967 [PATCH 3/3] OneNAND support (take #2)
30969 OneNAND support at U-Boot
30971 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30973 commit 17aa2800457df0c06b41516f46f126712c196219
30974 Author: Kyungmin Park <kmpark@infradead.org>
30975 Date: Mon Sep 10 17:14:34 2007 +0900
30977 OneNAND support (take #2)
30979 [PATCH 2/3] OneNAND support (take #2)
30981 OneNAND support at U-Boot
30983 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30985 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
30986 Author: Kyungmin Park <kmpark@infradead.org>
30987 Date: Mon Sep 10 17:13:49 2007 +0900
30989 OneNAND support (take #2)
30991 [PATCH 1/3] OneNAND support (take #2)
30993 OneNAND support at U-Boot
30995 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30997 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
30998 Author: Michal Simek <monstr@monstr.eu>
30999 Date: Sun Sep 16 20:51:57 2007 +0200
31001 [FIX] remove files form repository
31003 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
31004 Author: Wolfgang Denk <wd@denx.de>
31005 Date: Sun Sep 16 17:10:04 2007 +0200
31007 TQM8xx[LM]: Fix broken environment alignment.
31009 With recent toolchains, the environment sectors were no longer aligned to
31010 sector boundaries. The reason was a combination of two bugs:
31012 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
31013 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
31014 this gets defined, is not included here (and cannot be included
31015 without causing lots of problems).
31017 Added a new #define CFG_USE_PPCENV for all boards which really
31018 want to put the environment is a ".ppcenv" section.
31020 2) The linker scripts just include environment.o, silently assuming
31021 that the objects in that file are really in the order in which
31022 they are coded in the C file, i. e. "environment" first, then
31023 "redundand_environment", and "env_size" last. However, current
31024 toolchains (GCC-4.x) reorder the objects, causing the environment
31025 data not to start on a flash sector boundary:
31027 Instead of: we got:
31029 40008000 T environment 40008000 T env_size
31030 4000c000 T redundand_environment 40008004 T redundand_environment
31031 40010000 T env_size 4000c004 T environment
31033 Note: this patch fixes just the first part, and cures the alignment
31034 problem by making sure that "env_size" gets placed correctly. However,
31035 we still have a potential issue because primary and redundant
31036 environment sectors are actually swapped, i. e. we have now:
31038 40008000 T redundand_environment
31039 4000c000 T environment
31040 40010000 T env_size
31042 This shall be fixed in the next version.
31044 Signed-off-by: Wolfgang Denk <wd@denx.de>
31046 commit eb6da8050797c204c9d010548424186c7ce32fc1
31047 Author: Wolfgang Denk <wd@denx.de>
31048 Date: Sun Sep 16 02:39:35 2007 +0200
31050 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
31052 Signed-off-by: Wolfgang Denk <wd@denx.de>
31054 commit cd2d1602c54cc6957bdef3872272a4b264893960
31055 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
31056 Date: Mon Sep 10 14:54:56 2007 -0400
31060 Fixup for the break statement in wrong place.
31062 [Patch by urwithsughosh@gmail.com]
31063 Acked-by: Andy Fleming <afleming@freescale.com>
31064 Signed-off-by: Wolfgang Denk <wd@denx.de>
31066 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
31067 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31068 Date: Tue Sep 11 17:04:00 2007 +0200
31070 Fix do_div() usage in nand process output
31072 Fix usage of do_div() in nand erase|read|write process output.
31074 The last patch to nand_util.c introduced do_div() instead of libgcc's
31075 implementation. But do_div() returns the quotient in its first
31076 macro parameter and not as result.
31078 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31080 commit c750d2e6692a000a82f29de7bf24e3dc21239161
31081 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31082 Date: Wed Sep 12 12:36:53 2007 +0200
31084 NAND: Add CFG_NAND_QUIET option
31086 This config option sets the default for the progress information
31087 output behavior that can also be configured through the 'quiet'
31088 environment variable.
31090 The legacy NAND code does not print the current progress info
31091 on the console. So this option is for backward compatibility for
31092 units that are in the field and where setting the quiet variable
31093 is not an option. With CFG_NAND_QUIET set to '1' the console
31094 progress info is turned off. This can still be overwritten
31095 through the environment variable.
31097 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31099 commit dcb88630290d2bcd803386dd4c2be73142994c4f
31100 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
31101 Date: Thu Sep 13 16:06:05 2007 -0700
31103 ColdFire: fix build error becasue of bad type of mii_init()
31105 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31107 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
31108 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
31109 Date: Thu Sep 13 16:04:05 2007 -0700
31111 ColdFire: Fix build error caused by pixis.c
31113 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
31115 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31117 commit e21659e30660a1377c42af135a6114efe39801d9
31118 Author: Sam Sparks <SSparks@twacs.com>
31119 Date: Fri Sep 14 11:14:42 2007 -0600
31121 Update MPC8349ITX*_config to place config.tmp in right place.
31123 MPC834ITX*_config does not store config.tmp at the correct locatation,
31124 causing MPC8349ITXGP to have the wrong TEXT_BASE.
31126 Signed-off-by: Sam Sparks <SSparks@twacs.com>
31127 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31129 commit 1218abf1b5817a39a82399b4b928b00750575bda
31130 Author: Wolfgang Denk <wd@denx.de>
31131 Date: Sat Sep 15 20:48:41 2007 +0200
31133 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
31135 Signed-off-by: Wolfgang Denk <wd@denx.de>
31137 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
31138 Author: Dirk Behme <dirk.behme@googlemail.com>
31139 Date: Sat Sep 15 11:55:42 2007 +0200
31141 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
31143 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
31146 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
31148 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
31150 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
31151 Author: Michal Simek <monstr@monstr.eu>
31152 Date: Sat Sep 15 00:03:35 2007 +0200
31154 Synchronize with U-BOOT mainline
31156 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
31157 Author: Sam Sparks <SSparks@twacs.com>
31158 Date: Fri Sep 14 11:14:42 2007 -0600
31160 Update MPC8349ITX*_config to place config.tmp in right place.
31162 MPC834ITX*_config does not store config.tmp at the correct locatation,
31163 causing MPC8349ITXGP to have the wrong TEXT_BASE.
31165 Signed-off-by: Sam Sparks <SSparks@twacs.com>
31166 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31167 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31169 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
31170 Author: Bartlomiej Sieka <tur@semihalf.com>
31171 Date: Thu Sep 13 18:21:48 2007 +0200
31173 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
31175 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31177 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
31178 Author: Bartlomiej Sieka <tur@semihalf.com>
31179 Date: Thu Sep 13 16:33:59 2007 +0200
31181 tqm5200: Restore customary env. variable boot commands for powerpc kernels
31183 - update default definitions of kernel_addr and fdt_addr env. variables
31184 - make arch/powerpc booting the default scenario
31185 - update MTD partition layout to match the above
31187 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31189 commit f34024d4a328e6edd906456da98d2c537155c4f7
31190 Author: Wolfgang Denk <wd@denx.de>
31191 Date: Wed Sep 12 00:48:57 2007 +0200
31193 Fix memory corruption problem on STX GP3 SSA Board.
31195 Signed-off-by: Wolfgang Denk <wd@denx.de>
31197 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
31198 Author: Peter Pearse <peter.pearse@arm.com>
31199 Date: Tue Sep 11 15:35:01 2007 +0100
31203 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
31204 Author: Grzegorz Bernacki <gjb@semihalf.com>
31205 Date: Tue Sep 11 15:42:11 2007 +0200
31207 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
31208 scan on second pci bus.
31210 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31212 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
31213 Author: Grzegorz Bernacki <gjb@semihalf.com>
31214 Date: Tue Sep 11 12:57:52 2007 +0200
31216 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
31218 Bamboo has a file sdram.c which needs special treatment when building in
31219 separate directory. It has to be linked to build directory otherwise it is
31222 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31224 commit d45963854eff39d575124d859419bb4953ce2c87
31225 Author: Michal Simek <monstr@monstr.eu>
31226 Date: Tue Sep 11 00:37:04 2007 +0200
31228 [FIX] Microblaze ML401 - repare FLASH handling
31230 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
31231 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
31232 Date: Mon Sep 10 16:55:59 2007 +0100
31234 Allocate CPU Architecture Code for STMicroelectronics' ST200.
31236 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
31237 ---------------------------------------------------
31239 commit 754bac48156f8958d8f6a53a51eda88ab5758929
31240 Author: Wolfgang Denk <wd@denx.de>
31241 Date: Mon Sep 10 20:42:31 2007 +0200
31243 Update version to match current state.
31245 Signed-off-by: Wolfgang Denk <wd@denx.de>
31247 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
31248 Author: Grzegorz Bernacki <gjb@semihalf.com>
31249 Date: Mon Sep 10 17:39:08 2007 +0200
31251 [MPC512x] Streamline frame handling in the FEC driver
31253 - convert frame size settings to be derived from a single base
31254 - set frame size to the recommended default value
31256 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31258 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
31259 Author: Kyungmin Park <kmpark@infradead.org>
31260 Date: Mon Sep 10 11:34:00 2007 +0900
31262 Remove compiler warning: target CPU does not support interworking
31264 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
31266 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
31267 Author: Wolfgang Denk <wd@denx.de>
31268 Date: Sun Sep 9 21:21:33 2007 +0200
31270 Fix compile error in spc1920 config.
31272 Signed-off-by: Markus Klotzbücher <mk@denx.de>
31273 Signed-off-by: Wolfgang Denk <wd@denx.de>
31275 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
31276 Author: Grant Likely <grant.likely@secretlab.ca>
31277 Date: Fri Sep 7 09:25:07 2007 -0600
31279 Bugfix: make bootm+libfdt compile on boards with no flash
31281 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31283 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
31284 Author: Grzegorz Bernacki <gjb@semihalf.com>
31285 Date: Fri Sep 7 18:35:37 2007 +0200
31287 [PPC440SPe] PCIe environment settings for Katmai and Yucca
31289 - 'pciconfighost' is set by default in order to be able to scan bridges
31290 behind the primary host/PCIe
31292 - 'pciscandelay' env variable is recognized to allow for user-controlled
31293 delay before the PCIe bus enumeration; some peripheral devices require a
31294 significant delay before they can be scanned (e.g. LSI8408E); without the
31295 delay they are not detected
31297 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31299 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
31300 Author: Grzegorz Bernacki <gjb@semihalf.com>
31301 Date: Fri Sep 7 18:20:23 2007 +0200
31303 [PPC440SPe] Improve PCIe configuration space access
31305 - correct configuration space mapping
31306 - correct bus numbering
31307 - better access to config space
31309 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
31310 first device on the first bus. We now allow to configure up to 16 buses;
31311 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
31312 peripheral devices farther in hierarchy can be identified.
31314 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31316 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
31317 Author: Grzegorz Bernacki <gjb@semihalf.com>
31318 Date: Fri Sep 7 17:46:18 2007 +0200
31320 [PPC440SPe] Convert machine check exceptions handling
31322 Convert using fixup mechanism to suppressing MCK for the duration of config
31323 read/write transaction: while fixups work fine with the case of a precise
31324 exception, we identified a major drawback with this approach when there's
31325 an imprecise case. In this scenario there is the following race condition:
31326 the fixup is (by design) set to catch the instruction following the one
31327 actually causing the exception; if an interrupt (e.g. decrementer) happens
31328 between those two instructions, the ISR code is executed before the fixup
31329 handler the machine check is no longer protected by the fixup handler as it
31330 appears as within the ISR code. In consequence the fixup approach is being
31331 phased out and replaced with explicit suppressing of MCK during a PCIe
31332 config read/write cycle.
31334 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31336 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
31337 Author: Wolfgang Denk <wd@denx.de>
31338 Date: Fri Sep 7 17:43:36 2007 +0200
31340 Fix typo in MAKEALL script.
31342 Signed-off-by: Wolfgang Denk <wd@denx.de>
31344 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
31345 Author: Grzegorz Bernacki <gjb@semihalf.com>
31346 Date: Fri Sep 7 17:09:21 2007 +0200
31348 [MPC512x] Proper handling of larger frames in the FEC driver
31350 When frame larger than local RX buffer is received, it is split and handled
31351 by two buffer descriptors. Prior to this patch the FEC driver discarded
31352 contents of a buffer descriptor without the 'LAST' bit set, so the first
31353 part of the frame was lost in case of larger frames. This fix allows to
31354 safely combine the two pieces into the whole frame.
31356 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31358 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
31359 Author: Rafal Jaworowski <raj@semihalf.com>
31360 Date: Fri Sep 7 17:05:36 2007 +0200
31362 [MPC512x] Correct fixup relocation
31364 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
31366 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
31367 Author: Wolfgang Denk <wd@denx.de>
31368 Date: Fri Sep 7 01:21:25 2007 +0200
31370 Update CHANGELOG, minor coding style cleanup.
31372 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
31373 Author: stefano babic <sbabic@denx.de>
31374 Date: Thu Aug 30 23:01:49 2007 +0200
31376 PXA270: Added support for TrizepsIV board.
31378 This patch add support for the Trizeps IV module (520Mhz).
31380 Signed-off-by: Stefano Babic <sbabic@denx.de>
31382 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
31383 Author: stefano babic <sbabic@denx.de>
31384 Date: Thu Aug 30 22:57:04 2007 +0200
31386 PXA270: Add support for multiple serial ports.
31388 This patch adds support for multiple serial ports to the PXA target.
31389 FFUART, BTUART and STUART are supported.
31391 Signed-off-by: Stefano Babic <sbabic@denx.de>
31393 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
31394 Author: stefano babic <sbabic@denx.de>
31395 Date: Thu Aug 30 22:48:47 2007 +0200
31397 PXA270: fix compile issue (invalid lvalue)
31399 Code is broken for PXA270 due to "invalid lvalue in assignment".
31401 This patch fix it in pxa-regs.h
31403 Signed-off-by: Stefano Babic <sbabic@denx.de>
31405 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
31406 Author: Jason Jin <Jason.jin@freescale.com>
31407 Date: Thu Aug 30 18:19:05 2007 +0800
31409 Add BUILD_DIR support for bios emulator.
31411 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
31413 commit b4d8a55145442f136982634862341a3e02002bda
31414 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31415 Date: Fri Aug 31 14:41:51 2007 +0900
31417 [MIPS] Remove inline asm string functions
31419 Stop using inline string functions on MIPS as other ARCHs do so,
31420 since the optimized inline asm versions are not small.
31422 This change is triggered by a following MIPS build error:
31423 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
31424 common/exports.c:32: undefined reference to `strcmp'
31425 make: *** [u-boot] Error 1
31427 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31429 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
31430 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31431 Date: Fri Aug 31 14:41:45 2007 +0900
31433 [MIPS] Update asm string header
31435 This patches contains several bugfixes and cleanups in the latest upstream:
31437 - Don't include linux/config.h
31438 - Remove buggy inline version of memscan.
31439 - Merge with Linux 2.6.11-rc3.
31440 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
31441 - Goodbye mips64. 31704 lines of code bite the dust.
31442 - Replace extern inline with static inline.
31443 - Fix return value of strncpy.
31444 - Remove a bunch more "$1" clobbers.
31446 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31448 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
31449 Author: Bartlomiej Sieka <tur@semihalf.com>
31450 Date: Tue Sep 4 17:31:22 2007 +0200
31452 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
31454 Fix incorrect blob address calculation in do_bootm_linux() that prevents
31455 booting the kernel from a multi-file image (kernel + initrd + blob).
31457 Also, make minor updates to the U-Boot's output and to the coding style.
31459 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31461 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
31462 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
31463 Date: Fri Aug 31 14:29:04 2007 +0200
31465 Add support for Sil680 IDE controller.
31467 o add drivers/sil680.c to support the Sil680 IDE-controller.
31468 o drivers/Makefile: add sil680.o.
31470 Signed-off-by: Gary Jennejohn <garyj@denx.de>
31472 commit e79021223bc339df655e360645a52c457a74b067
31473 Author: Grant Likely <grant.likely@secretlab.ca>
31474 Date: Thu Sep 6 09:47:40 2007 -0600
31476 bootm/fdt: Only process the fdt if an fdt address was provided
31478 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
31479 kernels using the board info structure (instead of passing a device tree)
31480 This change allows the old style booting to be used if the fdt argument
31481 was not passed to 'bootm'.
31483 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31484 Acked-by: Kim Phillips <kim.phillips@freescale.com>
31486 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
31487 Author: Grant Likely <grant.likely@secretlab.ca>
31488 Date: Thu Sep 6 09:46:23 2007 -0600
31490 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
31492 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
31494 Tested on: lite5200b
31496 Note: the fixup functions have not been moved to a common place. This
31497 patch is targeted for immediate merging as in solves a build issue, but
31498 the final name/location of the fixups is still subject to debate. I
31499 propose to merge this now, and move the fixups in the next merge window
31500 to be usable by all targets.
31502 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31504 commit 41bb76e941929f54a73206fb132f7a4c275543a3
31505 Author: Grant Likely <grant.likely@secretlab.ca>
31506 Date: Thu Sep 6 09:46:17 2007 -0600
31508 libfdt: add convenience function fdt_find_and_setprop()
31510 Given the path to a node, fdt_find_and_setprop() allows a property value
31511 to be set directly.
31513 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31515 commit 80767a6cead9990d9e77e62be947843c2c72f469
31516 Author: Peter Pearse <peter.pearse@arm.com>
31517 Date: Wed Sep 5 16:04:41 2007 +0100
31519 Changed API name to coloured_led.h
31520 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
31521 Tidied other cpu/arm920t/start.S code
31523 commit 56a9270521baaa00e12639a978302a67f61ef060
31524 Author: Kumar Gala <galak@kernel.crashing.org>
31525 Date: Thu Aug 30 16:18:18 2007 -0500
31527 Fix ULI RTC support on MPC8544 DS
31529 The RTC on the M1575 ULI chipset requires a dummy read before
31530 we are able to talk to the RTC. We accomplish this by adding a
31531 second memory region to the PHB the ULI is on and read from it.
31533 The second region is added to maintain compatiabilty with Linux's
31534 view of the PCI memory map.
31536 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31538 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
31539 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31540 Date: Thu Aug 30 01:58:48 2007 -0500
31542 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
31544 pcie is now differentiated from pci. Add 8641 bus-range updates.
31546 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31548 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
31549 Author: Peter Pearse <peter.pearse@arm.com>
31550 Date: Tue Sep 4 16:18:38 2007 +0100
31552 Add coloured led interface for ARM boards.
31553 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
31555 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
31556 Author: Peter Pearse <peter.pearse@arm.com>
31557 Date: Tue Sep 4 14:49:28 2007 +0100
31559 Move include/led.h to board/at91rm9200dk
31561 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
31562 Author: Peter Pearse <peter.pearse@arm.com>
31563 Date: Tue Sep 4 14:25:51 2007 +0100
31565 Ran Lindent on drivers/at45.c
31567 commit 557ab89d294f08dd532f21d19861b40093200a33
31568 Author: Peter Pearse <peter.pearse@arm.com>
31569 Date: Tue Sep 4 14:23:50 2007 +0100
31571 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
31573 commit 81b73dec16fd1227369a191e725e10044a9d56b8
31574 Author: Gary Jennejohn <garyj@denx.de>
31575 Date: Fri Aug 31 15:21:46 2007 +0200
31577 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
31579 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
31580 set to non-zero, because it doesn't support MRM (memory-read-
31581 multiple) correctly. We now added the possibility to configure
31582 this register in the board config file, so that the default value
31583 of 8 can be overridden.
31585 Here the details of this patch:
31587 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
31588 board-specific settings. As an example the sequoia board requires 0.
31589 Idea from Stefan Roese <sr@denx.de>.
31590 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
31591 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
31592 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
31593 CFG_PCI_CACHE_LINE_SIZE to 0.
31595 Signed-off-by: Gary Jennejohn <garyj@denx.de>
31596 Signed-off-by: Stefan Roese <sr@denx.de>
31598 commit 60174746c668b309378a91488dded898e9553eae
31599 Author: Wolfgang Denk <wd@denx.de>
31600 Date: Fri Aug 31 10:01:51 2007 +0200
31602 Fix TFTP OACK code for short packets.
31604 The old code had a loop limit overflow bug which caused a semi-
31605 infinite loop for small packets, because in "i<len-8", "i" was signed,
31606 but "len" was unsigned, and "len-8" became a huge number for small
31609 This is a workaround which replaces broken commit 8f1bc284.
31611 Signed-off-by: Wolfgang Denk <wd@denx.de>
31613 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
31614 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31615 Date: Thu Aug 30 15:03:05 2007 +0200
31617 Reduce BOOTDELAY variable to 1 second by default for STK1002
31619 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31620 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
31622 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
31623 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31624 Date: Thu Aug 30 15:03:04 2007 +0200
31626 Remove double quotation marks around MAC address for STK1002
31628 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31629 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
31631 commit ff13ac8c7bbebb238e339592de765c546dba1073
31632 Author: Wolfgang Denk <wd@denx.de>
31633 Date: Thu Aug 30 14:42:15 2007 +0200
31635 Backout commit 8f1bc284 as it causes TFTP to fail.
31637 Signed-off-by: Wolfgang Denk <wd@denx.de>
31639 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
31640 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31641 Date: Thu Aug 30 02:26:17 2007 -0500
31643 Revert "Fix MPC8544DS PCIe3 scsi."
31645 This reverts commit 9468e680.
31646 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
31648 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31650 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
31651 Author: Grant Likely <grant.likely@secretlab.ca>
31652 Date: Wed Aug 29 18:26:24 2007 -0600
31654 tftp: don't implicity trust the format of recevied packets
31656 The TFTP OACK code trusts that the incoming packet is formated as
31657 ASCII text and can be processed by string functions. It also has a
31658 loop limit overflow bug where if the packet length is less than 8, it
31659 ends up looping over *all* of memory to find the 'blksize' string.
31661 This patch solves the problem by forcing the packet to be null
31662 terminated and using strstr() to search for the sub string.
31664 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31666 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
31667 Author: Stefan Roese <sr@denx.de>
31668 Date: Wed Aug 29 16:31:18 2007 +0200
31670 ppc4xx: Change lwmon5 default environment to support Linux RTC
31672 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
31673 to supply the RTC I2C address as bootline parameter. This patch
31674 adds support for this rtc probing parameter to the bootargs:
31676 "rtc-pcf8563.probe=0,0x51"
31678 Signed-off-by: Stefan Roese <sr@denx.de>
31680 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
31681 Author: Kim Phillips <kim.phillips@freescale.com>
31682 Date: Wed Aug 29 09:06:05 2007 -0500
31684 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
31686 this had slipped through the cracks, since the sbc board was added
31687 after I wrote the original patch to remove all these symbols, and
31688 before it was merged.
31690 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31692 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
31693 Author: Wolfgang Denk <wd@denx.de>
31694 Date: Wed Aug 29 14:05:30 2007 +0200
31696 Add mii_init() prototype
31698 to get rid of a *lot* of compiler warnings.
31700 Signed-off-by: Wolfgang Denk <wd@denx.de>
31702 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
31703 Author: Wolfgang Denk <wd@denx.de>
31704 Date: Wed Aug 29 13:35:03 2007 +0200
31706 Disable network support on cmi_mpc5xx board
31708 ..because it caused compiler errors and there seems to be no
31709 board maintainer to take care of this.
31711 Signed-off-by: Wolfgang Denk <wd@denx.de>
31713 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
31714 Author: Kumar Gala <galak@kernel.crashing.org>
31715 Date: Mon Aug 20 09:44:00 2007 -0500
31717 Fix MPC8544DS PCIe3 scsi.
31719 <ed.swarthout@freescale.com>
31721 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
31722 is allocating memory space it doesn't need.
31724 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
31725 Signed-off-by: Andy Fleming <afleming@freescale.com>
31727 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
31728 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31729 Date: Tue Aug 21 09:38:59 2007 -0500
31733 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
31734 correct consoledev needed for linux boot.
31735 Standardize on fdt{file,addr} var to hold dtb file name.
31737 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
31739 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31741 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
31742 Author: Haiying Wang <Haiying.Wang@freescale.com>
31743 Date: Thu Aug 23 15:20:54 2007 -0400
31745 Enable L2 cache for MPC8568MDS board
31747 The L2 cache size is 512KB for 8568, print out the correct informaiton.
31749 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
31751 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
31752 Author: Jason Jin <Jason.jin@freescale.com>
31753 Date: Wed Aug 22 17:54:49 2007 +0800
31755 Remove the bios emulator binary files from MAI board
31757 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
31759 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
31760 Author: Kim Phillips <kim.phillips@freescale.com>
31761 Date: Tue Aug 21 17:00:17 2007 -0500
31763 support board vendor-common makefiles
31765 if a board/$(VENDOR)/common/Makefile exists, build it.
31767 also add the first such case, board/freescale/common/Makefile, to
31768 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
31769 dictated by board configuration.
31771 thusly get rid of alternate build dir errors such as:
31773 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
31775 by putting the common/ mkdir command in its proper place (the common
31776 Makefile). Common bits from existing individual board Makefiles have
31779 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31781 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
31782 Author: stefano babic <sbabic@denx.de>
31783 Date: Tue Aug 21 15:52:33 2007 +0200
31785 Fix: TFTP is not working on little endian systems
31787 TFTP does not work anymore after multicast tftp
31788 patch was applied on little endian systems.
31791 Signed-off-by: Stefano Babic <sbabic@denx.de>
31793 commit 5f470948570526e9186f053a3003da7719604e90
31794 Author: stefano babic <sbabic@denx.de>
31795 Date: Tue Aug 21 15:50:33 2007 +0200
31797 Fix MAC address setting in DM9000 driver.
31799 The logic to check if there is a correct MAC address in the DM9000
31800 EEPROM, added in the last patch, is wrong. Now the MAC address is
31801 always taken from the environment, even if a suitable MAC is present
31804 Signed-off-by: Stefano Babic <sbabic@denx.de>
31806 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
31807 Author: Martin Krause <martin.krause@tqs.de>
31808 Date: Tue Aug 21 12:40:34 2007 +0200
31810 MPC5xxx: fix some compiler warnings in USB code
31812 Fix the following warnings:
31813 - usb.c:xx: warning: function declaration isn't a prototype
31814 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
31815 from pointer wihtout a cast
31817 Signed-off-by: Martin Krause <martin.krase@tqs.de>
31819 commit 16e23c3f5dab6937f5109365416808c7f15c122b
31820 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31821 Date: Mon Aug 20 23:55:33 2007 -0500
31823 fsl_pci_init - Remove self PCSRBAR allocation
31825 CPU physical address space was being wasted by allocating a
31826 PCSRBAR PCI inbound region to it's memory space.
31828 As a rule, PCSRBAR should be left alone since it does not affect
31829 transactions from self and other masters may have changed it.
31831 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
31833 commit 0e700ce03a23bb1921149bc77008ace7103d5289
31834 Author: Martin Krause <martin.krause@tqs.de>
31835 Date: Mon Aug 20 13:56:47 2007 +0200
31837 Fix compiler warning in include/s3c2410.h
31839 This patch fixes the "type qualifiers ignored on fuction return tpye"
31840 warning for include/s3c2410.h
31842 Signed-off-by: Martin Krause <martin.krause@tqs.de>
31844 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
31845 Author: Dirk Behme <dirk.behme@googlemail.com>
31846 Date: Mon Aug 20 07:09:05 2007 +0200
31848 Fix compilation error for omap2420h4_config.
31850 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
31851 and flash_probe() calls in env_flash.c.
31853 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
31855 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
31856 Author: Kim Phillips <kim.phillips@freescale.com>
31857 Date: Fri Aug 10 14:34:14 2007 -0500
31859 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
31861 and make some minor corrections to the FDT part of the README.
31863 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31865 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
31866 Author: Wolfgang Denk <wd@denx.de>
31867 Date: Wed Aug 29 01:32:05 2007 +0200
31869 Minor coding style cleanup.
31871 Signed-off-by: Wolfgang Denk <wd@denx.de>
31873 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
31874 Author: Heiko Schocher <hs@pollux.denx.de>
31875 Date: Tue Aug 28 17:40:33 2007 +0200
31877 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
31879 Signed-off-by: Heiko Schocher <hs@denx.de>
31881 commit f98984cb194bb34dbe1db9429d3b51133af30d07
31882 Author: Heiko Schocher <hs@pollux.denx.de>
31883 Date: Tue Aug 28 17:39:14 2007 +0200
31885 IDE: - make ide_inb () and ide_outb () "weak", so boards can
31886 define there own I/O functions.
31887 (Needed for the pcs440ep board).
31888 - The default I/O Functions are again 8 Bit accesses.
31889 - Added CONFIG_CMD_IDE for the pcs440ep Board.
31891 Signed-off-by: Heiko Schocher <hs@denx.de>
31893 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
31894 Author: Semih Hazar <semih.hazar@indefia.com>
31895 Date: Mon Aug 20 19:00:01 2007 +0300
31897 AVR32: Change prototype of memset
31899 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
31900 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
31902 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
31903 Author: Yuri Tikhonov <yur@emcraft.com>
31904 Date: Sat Aug 25 05:07:16 2007 +0200
31906 POST: limit memory test area to not touch global data anymore
31908 As experienced on lwmon5, on some boards the POST memory test can
31909 corrupt the global data buffer (bd). This patch fixes this issue
31910 by checking and limiting this area.
31912 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31913 Signed-off-by: Stefan Roese <sr@denx.de>
31915 commit 75e1a84d483e36be10e206e539b028c4889e1158
31916 Author: Stefan Roese <sr@denx.de>
31917 Date: Fri Aug 24 15:41:42 2007 +0200
31919 ppc4xx: Add RTC POST test to lwmon5 board configuration
31921 Since this RTC POST test is taking quite a while to complete
31922 it's only initiated upon special keypress same as the complete
31925 Signed-off-by: Stefan Roese <sr@denx.de>
31927 commit d7bfa620037a6d2210159387571bdf93aa32c162
31928 Author: Stefan Roese <sr@denx.de>
31929 Date: Fri Aug 24 15:19:10 2007 +0200
31931 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
31933 Signed-off-by: Stefan Roese <sr@denx.de>
31935 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
31936 Author: Stefan Roese <sr@denx.de>
31937 Date: Thu Aug 23 11:02:37 2007 +0200
31939 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
31941 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
31942 board. Now the "eeprom" command can be used to read/write from/to this
31943 device. Additionally a new command was added "eepromwp" to en-/disable
31944 the write-protect of this 2nd EEPROM.
31946 The 1st EEPROM is not affected by this write-protect command.
31948 Signed-off-by: Stefan Roese <sr@denx.de>
31950 commit c64fb30e4c5976007d56fc1789c7a0666082b536
31951 Author: Stefan Roese <sr@denx.de>
31952 Date: Wed Aug 22 08:56:09 2007 +0200
31954 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
31956 Signed-off-by: Stefan Roese <sr@denx.de>
31958 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
31959 Author: Stefan Roese <sr@denx.de>
31960 Date: Tue Aug 21 16:27:57 2007 +0200
31962 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
31964 This patch adds support for the matrix keyboard on the lwmon5 board.
31965 Since the implementation in the dsPCI is kind of compatible with the
31966 "old" lwmon board, most of the code is copied from the lwmon
31969 Signed-off-by: Stefan Roese <sr@denx.de>
31971 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
31972 Author: Wolfgang Denk <wd@denx.de>
31973 Date: Sun Aug 19 10:27:34 2007 +0200
31975 Fix some build errors.
31977 Signed-off-by: Wolfgang Denk <wd@denx.de>
31979 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
31980 Author: Wolfgang Denk <wd@denx.de>
31981 Date: Sat Aug 18 22:00:38 2007 +0200
31985 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
31986 Author: Kim Phillips <kim.phillips@freescale.com>
31987 Date: Thu Aug 16 22:52:39 2007 -0500
31989 lib_ppc: make board_add_ram_info weak
31991 platforms wishing to display RAM diagnostics in addition to size,
31992 can do so, on one line, in their own board_add_ram_info()
31995 this consequently eliminates CONFIG_ADD_RAM_INFO.
31997 Thanks to Stefan for the hint.
31999 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32001 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
32002 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
32003 Date: Fri Aug 17 12:43:44 2007 +0900
32005 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
32007 This patch has been sent on:
32010 Many users of PCI config read routines tend to ignore the function
32011 ret value, and are only concerned about the contents of *val. Based
32012 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
32013 the *val on dword read error.
32015 Without this fix, for example, we'll go on scanning bus with vendor or
32016 header_type uninitialized. This brings many unnecessary config trials.
32018 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
32020 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
32021 Author: Stefan Roese <sr@denx.de>
32022 Date: Sat Aug 18 14:37:52 2007 +0200
32024 ColdFire: Fix some remaining problems with CFG_CMD_
32026 Signed-off-by: Stefan Roese <sr@denx.de>
32028 commit 8280f6a1c43247616b68224675188e5ccd124650
32029 Author: Stefan Roese <sr@denx.de>
32030 Date: Sat Aug 18 14:33:02 2007 +0200
32032 Coding style cleanup
32034 Signed-off-by: Stefan Roese <sr@denx.de>
32036 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
32037 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32038 Date: Thu Aug 16 19:23:50 2007 -0500
32040 ColdFire: Add M5235EVB Platform for MCF523x
32042 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32044 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
32045 Author: Kim Phillips <kim.phillips@freescale.com>
32046 Date: Fri Aug 17 09:30:00 2007 -0500
32048 mpc83xx: fix typo in DDR2 programming
32050 introduced in the implement board_add_ram_info patch as I was cleaning out the
32051 magic numbers. sorry.
32053 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32055 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
32056 Author: Kim Phillips <kim.phillips@freescale.com>
32057 Date: Thu Aug 16 22:53:09 2007 -0500
32059 mpc83xx: move freescale boards to boards/freescale
32061 includes build fixes.
32063 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32065 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
32066 Author: Kim Phillips <kim.phillips@freescale.com>
32067 Date: Thu Aug 16 22:52:59 2007 -0500
32069 mpc83xx: suppress unused variable 'val8' warning
32071 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32073 commit bbea46f76f767b919070b4829bf34c86bd223248
32074 Author: Kim Phillips <kim.phillips@freescale.com>
32075 Date: Thu Aug 16 22:52:48 2007 -0500
32077 mpc83xx: implement board_add_ram_info
32079 add board_add_ram_info, to make memory diagnostic output more
32080 consistent. u-boot banner output now looks like:
32082 DRAM: 256 MB (DDR1, 64-bit, ECC on)
32084 and for boards with SDRAM on the local bus, a line such as this is
32087 SDRAM: 64 MB (local bus)
32089 also replaced some magic numbers with their equivalent define names.
32091 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32093 commit 14778585d1389d86d5846efec29e5fce892680ce
32094 Author: Tony Li <tony.li@freescale.com>
32095 Date: Fri Aug 17 10:35:59 2007 +0800
32097 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
32099 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
32100 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
32102 Signed-off-by Tony Li <tony.li@freescale.com>
32104 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
32105 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32106 Date: Thu Aug 16 15:05:11 2007 -0500
32108 ColdFire: Add M54455EVB for MCF5445x
32110 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32112 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
32113 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32114 Date: Thu Aug 16 13:20:50 2007 -0500
32116 ColdFire: Add M5253EVBE platform for MCF52x2
32118 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32120 commit a605aacd8324094199402816cc6d9124aba57b8d
32121 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32122 Date: Thu Aug 16 05:04:31 2007 -0500
32124 ColdFire: Add M5249EVB platform for MCF52x2
32126 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32128 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
32129 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32130 Date: Wed Aug 15 20:32:06 2007 -0500
32132 ColdFire: Update Freescale MCF52x2 platforms
32134 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32136 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
32137 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32138 Date: Wed Aug 15 19:55:10 2007 -0500
32140 ColdFire: Update EB+MCF-EV123 platform
32142 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32144 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
32145 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32146 Date: Wed Aug 15 19:46:38 2007 -0500
32148 ColdFire: update TASREG platform for MCF52x2
32150 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32152 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
32153 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32154 Date: Wed Aug 15 19:45:51 2007 -0500
32156 ColdFire: update r5200 platform for MCF52x2
32158 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32160 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
32161 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32162 Date: Wed Aug 15 19:43:20 2007 -0500
32164 ColdFire: idmr platform MCF52x2 update
32166 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32168 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
32169 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32170 Date: Wed Aug 15 19:41:06 2007 -0500
32172 ColdFire: cobra5272 platform for MCF52x2 update
32174 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32176 commit 56115665b4a64c10c01440c57749b265e0908fa4
32177 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32178 Date: Wed Aug 15 19:38:15 2007 -0500
32180 ColdFire: MCF52x2 Header files update
32182 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32184 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
32185 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32186 Date: Wed Aug 15 19:21:21 2007 -0500
32188 ColdFire: MCF52x2 update
32190 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32192 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
32193 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32194 Date: Wed Aug 15 18:46:11 2007 -0500
32196 ColdFire: MCF5329 update cache
32198 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32200 commit 7171977fb8fd77cfb6676953fa9a05789c450513
32201 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32202 Date: Wed Aug 15 15:40:20 2007 -0500
32204 ColdFire: MCF5329 header file clean up
32206 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32208 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
32209 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32210 Date: Wed Aug 15 15:39:17 2007 -0500
32212 ColdFire: MCF5329 Update and cleanup
32214 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32216 commit 10327dc5541f947c0cf7e31fef86c4706169607a
32217 Author: Andy Fleming <afleming@freescale.com>
32218 Date: Thu Aug 16 16:35:02 2007 -0500
32220 Add CONFIG_HAS_ETH0 to all boards with TSEC
32222 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
32223 to update TSEC1's device-tree node, so we need to add it
32224 to all the boards with TSECs. Do this for 83xx and 86xx, too,
32225 since they will eventually do something similar.
32227 Signed-off-by: Andy Fleming <afleming@freescale.com>
32229 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
32230 Author: Kumar Gala <galak@kernel.crashing.org>
32231 Date: Thu Aug 16 15:05:04 2007 -0500
32233 Update MPC8544 DS PCI memory map
32235 The PCIe bus that the ULI M1575 is connected to has no possible way of
32236 needing more than the fixed amount of IO & Memory space needed by the ULI.
32238 So make it use far less IO & memory space and have it use the shared LAW. This
32239 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
32242 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32244 commit ea5877e31ed63ade948fd1293895ec23fe01472e
32245 Author: Kumar Gala <galak@kernel.crashing.org>
32246 Date: Thu Aug 16 11:01:21 2007 -0500
32248 Fix up some fdt issues on 8544DS
32250 It looks like we had a merge issue that duplicated a bit of code
32251 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
32252 the MAC address properly set in the device tree on boot for TSEC1
32254 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32256 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
32257 Author: Niklaus Giger <niklaus.giger@netstal.com>
32258 Date: Thu Aug 16 15:16:03 2007 +0200
32260 PPC4xx:HCU4/5 cleanup
32262 Minor cleanups to confirm to the u-boot coding style.
32263 Some german expressions -> english.
32264 HCU5 enforces a unique IP adress for a given slot in the rack.
32266 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
32268 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
32269 Author: Niklaus Giger <niklaus.giger@netstal.com>
32270 Date: Thu Aug 16 15:16:02 2007 +0200
32272 PPC4xx:HCU4/5 cleanup ecc/sdram init
32274 Make ecc initialisation robust, as DDR2-ECC errors may be generated
32275 while zeroing the RAM.
32277 Return 16 bytes (a cacheline) less than the available memory, as the
32278 board and/or PPC440EPx might have problems accessing the last bytes.
32280 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
32282 commit d35b508a55508535b6e8445b718585d27df733d3
32283 Author: Kim Phillips <kim.phillips@freescale.com>
32284 Date: Wed Aug 15 22:29:56 2007 -0500
32286 fdt: suppress unused variable 'bd' warning
32288 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32290 commit 82bd9ee77490588d4da785d75829ca63d0176baf
32291 Author: Andy Fleming <afleming@freescale.com>
32292 Date: Wed Aug 15 20:06:50 2007 -0500
32294 Fix warnings from of_data copy fix
32296 Forgot to cast of_flat_tree to ulong.
32298 Signed-off-by: Andy Fleming <afleming@freescale.com>
32300 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
32301 Author: Andy Fleming <afleming@freescale.com>
32302 Date: Wed Aug 15 20:03:44 2007 -0500
32304 Don't wait for disconnected TSECs
32306 The TSEC driver's PHY code waits a long time for autonegotiation to
32307 complete, even if the link is down. The PHY knows the link is
32308 down or up before autonegotiation completes, so we can short-circuit
32309 the process if the link is down.
32311 Signed-off-by: Andy Fleming <afleming@freescale.com>
32313 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
32314 Author: Andy Fleming <afleming@freescale.com>
32315 Date: Wed Aug 15 20:03:34 2007 -0500
32317 Fix numerous bugs in the 8568 UEC support
32319 Actually, fixed a large bug in the UEC for *all* platforms.
32320 How did this ever work?
32322 uec_init() did not follow the spec for eth_init(), and returned
32323 0 on success. Switch it to return the link like tsec_init()
32326 The immap for the 8568 was defined based on MPC8568, rather than
32331 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
32333 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
32336 Signed-off-by: Andy Fleming <afleming@freescale.com>
32338 commit 3a79013e2adda53332dfd0b511066a805e929a9d
32339 Author: Andy Fleming <afleming@freescale.com>
32340 Date: Wed Aug 15 20:03:25 2007 -0500
32342 Define tsec flag values in config files
32344 The tsec_info structure and array has a "flags" field for each
32345 ethernet controller. This field is the only reason there are
32346 settings. Switch to defining TSECn_FLAGS for each controller
32347 in the config header, and we can greatly simplify the array, and
32348 also simplify the addition of future boards.
32350 Signed-off-by: Andy Fleming <afleming@freescale.com>
32352 commit ec7238229507e7f47533a611ea8c53319d234cf3
32353 Author: Andy Fleming <afleming@freescale.com>
32354 Date: Wed Aug 15 20:03:13 2007 -0500
32356 Add support for building all boards with a TSEC
32358 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
32359 Now we can do a MAKEALL test on all of them!
32361 Signed-off-by: Andy Fleming <afleming@freescale.com>
32363 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
32364 Author: Andy Fleming <afleming@freescale.com>
32365 Date: Wed Aug 15 17:30:56 2007 -0500
32367 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
32369 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
32370 neglected to *also* put the code inside the similar #ifdef
32371 for CONFIG_OF_FLAT_TREE.
32373 Signed-off-by: Andy Fleming <afleming@freescale.com>
32375 commit 78f9fef7f406078c8bf7191e665a73f795157746
32376 Author: Scott Wood <scottwood@freescale.com>
32377 Date: Wed Aug 15 15:46:46 2007 -0500
32379 mpc885ads: Don't define CONFIG_BZIP2.
32381 bzip2 requires a significant chunk of malloc space, and there isn't
32382 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
32383 and a downloaded image at 0x400000.
32385 Signed-off-by: Scott Wood <scottwood@freescale.com>
32387 commit 002275a3ed8b114885f6702d6d544d0780dfe689
32388 Author: Michal Simek <Monstr@seznam.cz>
32389 Date: Thu Aug 16 08:54:10 2007 +0200
32391 Bios emulator - fix microblaze toolchain problem
32393 microblaze CPU have problem with bios_emulator code.
32394 Microblaze toolchain doesn't support PRAGMA PACK.
32396 Signed-off-by: Michal Simek <monstr@monstr.eu>
32398 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
32399 Author: Wolfgang Denk <wd@denx.de>
32400 Date: Thu Aug 16 11:51:04 2007 +0200
32402 Minor Coding Style fix; Update CHANGELOG file.
32404 Signed-off-by: Wolfgang Denk <wd@denx.de>
32406 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
32407 Author: Stefan Roese <sr@denx.de>
32408 Date: Thu Aug 16 11:21:49 2007 +0200
32410 ppc4xx: Remove #warning in esd auto_update.c
32412 Signed-off-by: Stefan Roese <sr@denx.de>
32414 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
32415 Author: Stefan Roese <sr@denx.de>
32416 Date: Fri Jun 22 17:32:28 2007 +0200
32418 ppc7xx: Update CPCI750 board
32420 This small CPCI750 update extends the board specific command
32421 "show_config" to display the Marvell strapping registers and
32422 extends the PCI IDE controller.
32424 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
32425 Signed-off-by: Stefan Roese <sr@denx.de>
32427 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
32428 Author: Michal Simek <monstr@monstr.eu>
32429 Date: Thu Aug 16 10:46:28 2007 +0200
32431 [FIX] Changes for bios_emulator code for others architecture
32433 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
32434 Author: Michal Simek <monstr@monstr.eu>
32435 Date: Thu Aug 16 10:45:09 2007 +0200
32437 [FIX] Remove unused include file
32439 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
32440 Author: Stefan Roese <sr@denx.de>
32441 Date: Thu Aug 16 10:18:33 2007 +0200
32443 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
32445 Signed-off-by: Stefan Roese <sr@denx.de>
32447 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
32448 Author: Stefan Roese <sr@denx.de>
32449 Date: Thu Aug 16 09:54:51 2007 +0200
32451 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
32453 Signed-off-by: Stefan Roese <sr@denx.de>
32455 commit 02ba7022f62bb75908296c58c63866e1d294b69a
32456 Author: Stefan Roese <sr@denx.de>
32457 Date: Thu Aug 16 09:52:29 2007 +0200
32459 ppc4xx: Update Sequoia/Rainier bootstrap command
32461 As suggested by David Mitchell, here an update for the Sequoia/Rainier
32464 Signed-off-by: Stefan Roese <sr@denx.de>
32466 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
32467 Author: Kim Phillips <kim.phillips@freescale.com>
32468 Date: Wed Aug 15 22:30:39 2007 -0500
32470 mpc83xx: enable libfdt by default on freescale boards
32472 this enables libfdt code by default for the
32473 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
32474 mpc8349itx and gp boards.
32476 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32478 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
32479 Author: Kim Phillips <kim.phillips@freescale.com>
32480 Date: Wed Aug 15 22:30:33 2007 -0500
32482 mpc83xx: migrate remaining freescale boards to libfdt
32484 this adds libfdt support code for the freescale
32485 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
32488 Boards remain compatible with OF_FLAT_TREE.
32490 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32492 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
32493 Author: Kim Phillips <kim.phillips@freescale.com>
32494 Date: Wed Aug 15 22:30:26 2007 -0500
32496 mpc83xx: move common /memory node update mechanism to cpu.c
32498 also adds common prototypes to include/common.h.
32500 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32502 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
32503 Author: Kim Phillips <kim.phillips@freescale.com>
32504 Date: Wed Aug 15 22:30:19 2007 -0500
32506 mpc83xx: remaining 8360 libfdt fixes
32508 PCI clocks and QE frequencies weren't being updated, and the core clock
32509 was being updated incorrectly. This patch also adds a /memory node if
32510 it doesn't already exist prior to update.
32512 plus some cosmetic trimming to single line comments.
32514 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32516 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
32517 Author: Kim Phillips <kim.phillips@freescale.com>
32518 Date: Wed Aug 15 22:30:12 2007 -0500
32520 mpc83xx: fix UEC2->1 typo in libfdt setup code
32522 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32524 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
32525 Author: Kim Phillips <kim.phillips@freescale.com>
32526 Date: Wed Aug 15 22:30:05 2007 -0500
32528 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
32530 and reorder the existing 83xx maintainers alpha.
32532 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32534 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
32535 Author: Michal Simek <monstr@monstr.eu>
32536 Date: Wed Aug 15 21:15:05 2007 +0200
32538 [FIX] Resolve problem with warnings
32539 microblaze toolchain don't support PRAGMA PACK.
32541 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
32542 Author: Michal Simek <monstr@monstr.eu>
32543 Date: Wed Aug 15 21:05:07 2007 +0200
32545 [FIX] Correction command setting for Microblaze boards
32547 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
32548 Author: Michal Simek <monstr@monstr.eu>
32549 Date: Wed Aug 15 21:03:41 2007 +0200
32551 [FIX] Correction command definition
32553 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
32554 Author: Jon Loeliger <jdl@freescale.com>
32555 Date: Wed Aug 15 11:55:35 2007 -0500
32557 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
32559 Remove a leftover in net/tftp.c while we're at it.
32561 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32563 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
32564 Author: Jon Loeliger <jdl@freescale.com>
32565 Date: Wed Aug 15 12:20:40 2007 -0500
32567 Move the MPC8641HPCN board under board/freescale.
32569 Minor path corrections needed to ensure buildability.
32571 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32573 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
32574 Author: Jon Loeliger <jdl@freescale.com>
32575 Date: Wed Aug 15 11:46:22 2007 -0500
32577 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
32579 Remove a leftover in net/tftp.c while we're at it.
32581 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32583 commit 210f463c71917b7a4495c2103c228b9c179ae64d
32584 Author: Jerry Van Baren <gvb.uboot@gmail.com>
32585 Date: Wed Aug 15 11:13:15 2007 -0400
32587 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
32589 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
32590 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
32591 when it should have gone inside of the conditional. As a result, it
32592 broke non-LIBFDT board builds.
32594 Also added a missing "not." to the comment.
32596 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
32598 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
32599 Author: Niklaus Giger <niklaus.giger@netstal.com>
32600 Date: Wed Aug 15 12:14:23 2007 +0200
32602 PPC4xx:HCU4/5-Board fix compile warning
32604 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
32606 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
32607 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32608 Date: Tue Aug 14 14:06:45 2007 -0500
32610 Fix malloc size error in ahci_init_one.
32612 Typically this causes scsi init to corrupt the
32613 devlist and break the coninfo command.
32614 Fix a compiler size warning.
32616 Signed-off-by: Jason Jin <jason.jin@freescale.com>
32617 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32618 Acked-by: Andy Fleming <afleming@freescale.com>
32620 commit b361acd64fd2525c081b9b288b0804efe209c0e9
32621 Author: ksi@koi8.net <ksi@koi8.net>
32622 Date: Tue Aug 14 10:02:16 2007 -0700
32624 TI DaVinci - fix unsupported %hhx format
32626 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
32628 commit f01dbb5424a81453c81190dd30e945891466f621
32629 Author: Wolfgang Denk <wd@denx.de>
32630 Date: Tue Aug 14 18:42:36 2007 +0200
32632 Coding style cleanup. Update CHANGELOG.
32634 Signed-off-by: Wolfgang Denk <wd@denx.de>
32636 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
32637 Author: Andy Fleming <afleming@freescale.com>
32638 Date: Tue Aug 14 10:32:59 2007 -0500
32640 Fix initrd/dtb interaction
32642 The original code would wrongly relocate the blob to be right before
32643 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
32644 if it is defined. So we make two changes:
32646 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
32648 2) If the blob is being relocated, relocate it before kbd, not initrd
32650 Signed-off-by: Andy Fleming <afleming@freescale.com>
32652 commit e54b970173769307a116bd34028b6d0c2eea2a4e
32653 Author: Peter Pearse <peter.pearse@arm.com>
32654 Date: Tue Aug 14 15:40:00 2007 +0100
32656 Supply spi interface in at45.c
32658 commit 4ce846ec59f36b85d6644a769690ad3feb667575
32659 Author: Stefan Roese <sr@denx.de>
32660 Date: Tue Aug 14 15:12:01 2007 +0200
32662 POST: Fix merge problem
32664 Signed-off-by: Stefan Roese <sr@denx.de>
32666 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
32667 Author: Stefan Roese <sr@denx.de>
32668 Date: Tue Aug 14 15:03:17 2007 +0200
32670 Coding style cleanup
32672 Signed-off-by: Stefan Roese <sr@denx.de>
32674 commit 779e975117a75e91fcebe226a63104dbfb924ab1
32675 Author: Stefan Roese <sr@denx.de>
32676 Date: Tue Aug 14 14:44:41 2007 +0200
32678 ppc4xx: Add initial Zeus (PPC405EP) board support
32680 Signed-off-by: Stefan Roese <sr@denx.de>
32682 commit c5a172a5fd636c12467429e3f7910e53773979c6
32683 Author: Stefan Roese <sr@denx.de>
32684 Date: Tue Aug 14 14:41:55 2007 +0200
32686 POST: Add option for external ethernet loopback test
32688 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
32689 is not done using an internal loopback connection, but by assuming
32690 that an external loopback connector is plugged into the board.
32692 Signed-off-by: Stefan Roese <sr@denx.de>
32694 commit eb2b4010ae426245172988804ee8d9193fb41038
32695 Author: Stefan Roese <sr@denx.de>
32696 Date: Tue Aug 14 14:39:44 2007 +0200
32698 POST: Add ppc405 support to cache and UART POST
32700 Signed-off-by: Stefan Roese <sr@denx.de>
32702 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
32703 Author: Peter Pearse <peter.pearse@arm.com>
32704 Date: Tue Aug 14 10:46:32 2007 +0100
32706 Replace lost end of at45.c.
32708 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
32709 Author: Peter Pearse <peter.pearse@arm.com>
32710 Date: Tue Aug 14 10:30:06 2007 +0100
32712 Update Makefiles for merged and split at45.c.
32714 commit 3454cece2db57cb9eb7087995f7e73066a163f71
32715 Author: Peter Pearse <peter.pearse@arm.com>
32716 Date: Tue Aug 14 10:21:06 2007 +0100
32718 Delete the merged files.
32720 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
32721 Author: Peter Pearse <peter.pearse@arm.com>
32722 Date: Tue Aug 14 10:14:05 2007 +0100
32726 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
32727 Author: Peter Pearse <peter.pearse@arm.com>
32728 Date: Tue Aug 14 10:10:52 2007 +0100
32730 Add MACH_TYPE records for several AT91 boards.
32731 Merge to two at45.c files into a common file, split to at45.c and spi.c
32732 Fix spelling error in DM9161 PHY Support.
32733 Initialize at91rm9200 board (and set LED).
32734 Add PIO control for at91rm9200dk LEDs and Mux.
32735 Change dataflash partition boundaries to be compatible with Linux 2.6.
32737 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
32738 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
32740 commit 4ef35e53c693556c54b0c22d6f873de87bade253
32741 Author: Wolfgang Denk <wd@denx.de>
32742 Date: Tue Aug 14 09:54:46 2007 +0200
32744 Coding style cleanup, update CHANGELOG
32746 Signed-off-by: Wolfgang Denk <wd@denx.de>
32748 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
32749 Author: Wolfgang Denk <wd@denx.de>
32750 Date: Tue Aug 14 09:47:27 2007 +0200
32752 Coding style cleanup; rebuild CHANGELOG
32754 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
32755 Author: Randy Vinson <rvinson@linuxbox.(none)>
32756 Date: Tue Feb 27 19:42:22 2007 -0700
32758 85xxCDS: Add make targets for legacy systems.
32760 The PCI ID select values on the Arcadia main board differ depending
32761 on the version of the hardware. The standard configuration supports
32762 Rev 3.1. The legacy target supports Rev 2.x.
32764 Signed-off-by Randy Vinson <rvinson@mvista.com>
32766 commit e41094c7e38177c755fbd9b182018069614f080d
32767 Author: Andy Fleming <afleming@freescale.com>
32768 Date: Tue Aug 14 01:50:09 2007 -0500
32770 85xxCDS: Enable the VIA PCI-to-ISA bridge.
32772 Author: Randy Vinson <rvinson@linuxbox.(none)>
32774 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
32775 Arcadia main board.
32777 Signed-off-by: Randy Vinson <rvinson@mvista.com>
32778 Signed-off-by: York Sun <yorksun@freescale.com>
32780 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
32781 Author: Andy Fleming <afleming@freescale.com>
32782 Date: Tue Aug 14 00:14:25 2007 -0500
32784 Add support for UEC to 8568
32786 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32787 Signed-off-by: Andy Fleming <afleming@freescale.com>
32789 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
32790 Author: Haiying Wang <Haiying.Wang@freescale.com>
32791 Date: Tue Jun 19 14:18:34 2007 -0400
32793 Add PCI support for MPC8568MDS board
32795 This patch is against u-boot-mpc85xx.git of www.denx.com
32797 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32798 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
32800 commit d111d6382c99fdea08c2312eeeae8786945e189a
32801 Author: Haiying Wang <Haiying.Wang@freescale.com>
32802 Date: Tue Jun 19 14:18:32 2007 -0400
32804 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
32806 This patch is against u-boot-mpc85xx.git of www.denx.com
32808 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
32809 both MPC8548CDS board and MPC8568MDS board, especially for supporting
32812 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
32813 DDR2 on all current board versions especially ver 1.92 or later to bring
32816 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32818 commit 3db0bef59eab1155801618cef5c481e97553b597
32819 Author: Kumar Gala <galak@kernel.crashing.org>
32820 Date: Tue Aug 7 18:07:27 2007 -0500
32822 Use an absolute address when jumping out of 4k boot page
32824 On e500 when we leave the 4k boot page we should use an absolute address since
32825 we don't know where the board code may want us to be really running at.
32827 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32829 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
32830 Author: Andy Fleming <afleming@freescale.com>
32831 Date: Mon Aug 13 14:49:59 2007 -0500
32833 MPC85xx BA bits not set for 3-bit bank address DIMM
32835 The current implementation does not set the number of bank address bits
32836 (BA) in the processor. The default assumes 2 logical bank bits. This
32837 works fine for a DIMM that uses devices with 4 internal banks (SPD
32838 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
32839 devices with 8 internal banks (SPD byte17 = 0x8).
32841 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
32843 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
32844 Author: Andy Fleming <afleming@freescale.com>
32845 Date: Mon Aug 13 14:38:06 2007 -0500
32847 Fix minor 85xx warnings
32849 Some patches had inserted warnings into the build:
32850 * mpc8560ads declared data without using it
32851 * cpu_init declared ecm and immap without using it in all CONFIGs
32852 * MPC8548CDS.h had its default filenames changed so that they contained
32853 "\m" in the paths. Made the defaults not Windows-specific (or
32856 Signed-off-by: Andy Fleming <afleming@freescale.com>
32858 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
32859 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32860 Date: Fri Jul 27 01:50:52 2007 -0500
32862 8548cds PCIE support.
32864 Make the early L1 cache stack region guarded to prevent speculative
32865 fetches outside the locked range.
32867 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
32868 init.S whitespace cleanup.
32870 Allow TEXT_BASE value to be specified on command line. This allows it
32871 to be set to 0xfffc0000 which cuts the uboot binary in half.
32873 Clear and enable lbc and ecm errors.
32875 Update last_busno in device-tree for pci and pcie.
32877 Remove load of obsolete cpu/mpc85xx/pci.0
32879 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32880 Acked-by: Andy Fleming <afleming@freescale.com>
32882 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
32883 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32884 Date: Fri Jul 27 01:50:51 2007 -0500
32886 8544ds PCIE support
32888 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
32890 Enable LBC and ECM errors and clear error registers.
32892 Add tftpflash env var to get uboot from tftp server and flash it.
32894 Add pci/pcie convenience env vars to display register space:
32895 "run pcie3regs" to see all pcie3 ccsr registers
32896 "run pcie3cfg" to see all cfg registers
32897 Whitespace cleanup and MPC8544DS.h
32899 Enable CONFIG_INTERRUPTS.
32901 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32902 Acked-by: Andy Fleming <afleming@freescale.com>
32904 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
32905 Author: Andy Fleming <afleming@freescale.com>
32906 Date: Tue Aug 14 01:34:21 2007 -0500
32908 85xx start.S cleanup and exception support
32910 From: Ed Swarthout <Ed.Swarthout@freescale.com>
32912 Support external interrupts from platform to eliminate system hangs.
32913 Define CONFIG_INTERRUPTS board configure option to enable.
32914 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
32916 Remove extra cpu initialization redundant with hardware initialization.
32917 Whitespace cleanup.
32919 Define and use _START_OFFSET consistent with other processors using
32922 Move additional code from .text to boot page to make room for
32923 exception vectors at start of image.
32925 Handle Machine Check, External and Critical exceptions.
32927 Fix e500 machine check error determination in traps.c
32929 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
32931 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32932 Acked-by: Andy Fleming <afleming@freescale.com>
32934 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
32935 Author: Andy Fleming <afleming@freescale.com>
32936 Date: Tue Aug 14 01:33:18 2007 -0500
32938 Add MPC8544DS README
32940 Signed-off-by: Andy Fleming <afleming@freescale.com>
32942 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
32943 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32944 Date: Fri Jul 27 01:50:48 2007 -0500
32946 85xx allow debugger to configure ddr.
32948 Only check for mpc8548 rev 1 when compiled for 8548.
32950 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32951 Acked-by: Andy Fleming <afleming@freescale.com>
32953 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
32954 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32955 Date: Fri Jul 27 01:50:47 2007 -0500
32957 mpc85xx L2 cache reporting and SRAM relocation option.
32959 Allow debugger to override flash cs0/cs1 settings to enable alternate
32962 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32963 Acked-by: Andy Fleming <afleming@freescale.com>
32965 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
32966 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32967 Date: Fri Jul 27 01:50:46 2007 -0500
32969 e500 needs ppc_asm.tmp MCK_EXCEPTION
32971 Always define MCK_EXCEPTION macro - so e500 can use it too.
32973 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32974 Acked-by: Andy Fleming <afleming@freescale.com>
32976 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
32977 Author: David Updegraff <dave@cray.com>
32978 Date: Mon Jun 11 10:41:07 2007 -0500
32980 multicast tftp: RFC2090
32982 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
32983 on Realtek RTL8139 and Freescale TSEC.
32985 Signed-off-by: David Updegraff <dave@cray.com>
32986 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32988 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
32989 Author: Wilson Callan <wcallan@savantav.com>
32990 Date: Sat Jul 28 10:56:13 2007 -0400
32992 New CONFIG_BOOTP_SERVERIP option
32994 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
32995 from the bootp server
32997 Signed-off-by: Wilson Callan <wcallan@savantav.com>
32998 Signed-off-by: Ben Warren <bwarren@qstreams.com>
33000 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
33001 Author: Mike Rapoport <mike@compulab.co.il>
33002 Date: Sun Aug 12 08:48:27 2007 +0300
33004 Add ability to take MAC address from the environment to DM9000 driver
33006 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
33007 Signed-off-by: Ben Warren <bwarren@qstreams.com>
33009 commit be5d72d10d47609326226225181e301fb9a33b58
33010 Author: Wolfgang Denk <wd@denx.de>
33011 Date: Mon Aug 13 21:57:53 2007 +0200
33013 Minor coding style cleanup. Update CHANGELOG.
33015 Signed-off-by: Wolfgang Denk <wd@denx.de>
33017 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
33018 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33019 Date: Sat Aug 11 06:54:58 2007 -0500
33021 Modify SBC8641D to use new Freescale PCI routines
33023 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
33026 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33027 Signde-off-by: Jon Loeliger <jdl@freescale.com>
33029 commit a08458303e7f9db67f296980036d3292c35cb45c
33030 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
33031 Date: Fri Jun 29 18:38:51 2007 +0200
33033 atmel_mci: Fix data timeout value
33035 Calculate the data timeout based on values from the CSD instead of
33036 just using a hardcoded DTOR value. This is a backport of a similar fix
33037 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
33040 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
33042 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
33043 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
33044 Date: Mon Aug 13 17:22:31 2007 +0200
33046 AVR32: Include <div64.h> instead of <asm/div64.h>
33048 include/asm-avr32/div64.h was recently moved to include/div64.h, but
33049 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
33050 the patch was merged perhaps?)
33052 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
33055 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
33057 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
33058 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
33059 Date: Wed Jun 27 13:34:26 2007 +0200
33061 atmel_mci: Use 512 byte blocksize if possible
33063 Instead of always using the largest blocksize the card supports, check
33064 if it can support smaller block sizes and use 512 bytes if possible.
33065 Most cards do support this, and other parts of u-boot seem to have
33066 trouble with block sizes different from 512 bytes.
33068 Also enable underrun/overrun protection.
33070 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
33071 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
33073 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
33074 Author: Stefan Roese <sr@denx.de>
33075 Date: Mon Aug 13 09:05:33 2007 +0200
33077 ppc4xx: Fix problem in PLL clock calculation
33079 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
33080 and fixes a bug in the PLL clock calculation.
33082 Signed-off-by: Stefan Roese <sr@denx.de>
33084 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
33085 Author: Wolfgang Denk <wd@denx.de>
33086 Date: Sun Aug 12 21:34:50 2007 +0200
33090 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
33091 Author: Wolfgang Denk <wd@denx.de>
33092 Date: Sun Aug 12 21:34:34 2007 +0200
33094 Minor alignment of output, 2nd try.
33095 Also update CHANGELOG
33097 Signed-off-by: Wolfgang Denk <wd@denx.de>
33099 commit 6b309f22a724fad8418e811751a0741b893419cf
33100 Author: Wolfgang Denk <wd@denx.de>
33101 Date: Sun Aug 12 20:35:49 2007 +0200
33103 Minor alignment of output
33105 Signed-off-by: Wolfgang Denk <wd@denx.de>
33107 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
33108 Author: Wolfgang Denk <wd@denx.de>
33109 Date: Sun Aug 12 18:28:18 2007 +0200
33111 Cleanup output on ADS5121 board
33113 Signed-off-by: Wolfgang Denk
33115 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
33116 Author: Wolfgang Denk <wd@denx.de>
33117 Date: Sun Aug 12 15:11:38 2007 +0200
33119 Adapt board configuration and fix kernel crash on MCC200 board.
33121 The update procedure was modified to turn off the USB subsystem
33122 before exit for MCC200 and TRAB. This is necessary as otherwise the
33123 USB controller continues to write periodically to system memory!
33125 MCC200-specific notes:
33126 - the patch disables the magic key check for MCC200
33127 - the patch contains the configuration changes made
33128 for the new revision of the board.
33130 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
33131 Signed-off-by: Wolfgang Denk <wd@denx.de>
33133 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
33134 Author: Wolfgang Denk <wd@denx.de>
33135 Date: Sun Aug 12 14:47:54 2007 +0200
33137 Adjust default configuration of ADS5121 board.
33139 Signed-off-by: Wolfgang Denk <wd@denx.de>
33141 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
33142 Author: Wolfgang Denk <wd@denx.de>
33143 Date: Sun Aug 12 14:27:39 2007 +0200
33145 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
33147 Signed-off-by: Wolfgang Denk <wd@denx.de>
33149 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
33150 Author: Gerald Van Baren <vanbaren@cideas.com>
33151 Date: Tue Aug 7 21:14:22 2007 -0400
33153 Improve error print messages.
33155 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33157 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
33158 Author: Kim Phillips <kim.phillips@freescale.com>
33159 Date: Tue Jul 17 13:57:04 2007 -0500
33161 fdt: allow for builds that don't want env and bd_t nodes
33163 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
33166 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33168 commit 91148bf7aeba142d6f348805db7625db7da64d6f
33169 Author: Kim Phillips <kim.phillips@freescale.com>
33170 Date: Tue Jul 17 13:56:53 2007 -0500
33172 fdt: do board setup based on fdt address specified on bootm line
33174 The last fdt patch to bootm did board setup based on the address
33175 specified by a prior fdt address command invocation. The bootm
33176 code, as its call to fdt_chosen does, should use the fdt specified
33177 by the user on the bootm command. Note this restores full
33178 functionality for the 8360's existing default boot environment
33179 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
33180 before booting a kernel).
33182 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33184 commit e125a2ffc209dd34794e326c7175658253beadf3
33185 Author: Gerald Van Baren <vanbaren@cideas.com>
33186 Date: Tue Jul 10 20:40:39 2007 -0400
33188 Call ft_board_setup() from the bootm command.
33190 In the patch titled "Create new fdt boardsetup command..." I removed the
33191 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
33192 to add a direct call back into cmd_bootm.c
33194 This fixes the oversight by adding the direct call to the bootm command.
33196 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33198 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
33199 Author: Gerald Van Baren <vanbaren@cideas.com>
33200 Date: Mon Jun 25 23:25:28 2007 -0400
33202 Create new fdt boardsetup command, fix bug parsing [] form of set values.
33204 Previously ft_board_setup() was called by fdt_chosen() which was not
33205 really correctly structured. This splits ft_board_setup() out by creating
33206 a new fdt boardsetup command.
33208 Fix a bug when parsing fdt set command values which have the square
33209 bracket form [00 11 22 33] - the length was updated incorrectly in when
33212 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33214 commit 6f35ded9e85493595e0eb66a82b502a95326d049
33215 Author: Gerald Van Baren <vanbaren@cideas.com>
33216 Date: Mon Jun 25 20:55:58 2007 -0400
33218 Tighten up the error messages.
33220 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33222 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
33223 Author: Gerald Van Baren <vanbaren@cideas.com>
33224 Date: Mon Jun 25 19:52:23 2007 -0400
33226 Asthetic improvements: error messages and line lengths.
33228 Tighten up the error messages, split overlength lines.
33230 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33232 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
33233 Author: Gerald Van Baren <vanbaren@cideas.com>
33234 Date: Fri May 25 22:08:57 2007 -0400
33236 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
33238 The fdt_chosen() function was adding/seting some properties ad-hoc
33239 improperly and duplicated (poorly) what was done in ft_board_setup()
33241 Clean up long lines (setting properties, printing errors).
33243 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33245 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
33246 Author: Gerald Van Baren <vanbaren@cideas.com>
33247 Date: Mon May 21 23:27:16 2007 -0400
33249 For fdt_find_node_by_path(), handle the root path properly.
33251 Also removes the special case root path detection in cmd_fdt.c since it
33252 is no longer necessary.
33254 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33256 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
33257 Author: Gerald Van Baren <vanbaren@cideas.com>
33258 Date: Thu May 17 23:54:36 2007 -0400
33260 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
33262 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
33263 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33265 commit 1a861169bc3758f9de3aead62b058736c6891246
33266 Author: Gerald Van Baren <vanbaren@cideas.com>
33267 Date: Wed Jun 6 22:47:58 2007 -0400
33269 Replace fdt_node_offset() with fdt_find_node_by_path().
33271 The new name matches more closely the kernel's name, which is also
33272 a much better description.
33274 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
33275 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33277 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
33278 Author: Gerald Van Baren <vanbaren@cideas.com>
33279 Date: Wed May 16 22:39:59 2007 -0400
33281 Fix cmd_fdt line lengths, refactor code.
33283 Break lines that were greater than 80 characters in length.
33284 Move the fdt print and property parsing code to separate static functions
33285 to reduce coding clutter in the fdt_cmd handling body.
33287 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33289 commit 25114033ab21788810c48ba4df103b649da1223b
33290 Author: Gerald Van Baren <vanbaren@cideas.com>
33291 Date: Sat May 12 09:47:25 2007 -0400
33293 FDT command improvements.
33295 Fix "fdt set" so that it will create a non-existing property.
33296 Add "fdt mknode" to create nodes.
33298 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33300 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
33301 Author: Gerald Van Baren <vanbaren@cideas.com>
33302 Date: Sat May 12 09:45:46 2007 -0400
33304 Reorganize and fix problems (returns) in the bootm command.
33306 Do *NOT* return after the "point of no return" has been passed.
33307 If something goes wrong, the board must be reset after that point.
33308 Move the "Transferring control to Linux" debug message back to where it
33309 belongs: just before transferring control to linux.
33311 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33313 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
33314 Author: Gerald Van Baren <vanbaren@cideas.com>
33315 Date: Tue May 8 21:27:35 2007 -0400
33317 Fix bugs in the CONFIG_OF_LIBFDT
33319 Stupid coding mistakes (identified by Timur Tabi, thanks).
33321 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33323 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
33324 Author: Gerald Van Baren <vanbaren@cideas.com>
33325 Date: Wed Apr 25 22:47:15 2007 -0400
33327 Improve fdt move length handling.
33329 Make the length parameter optional: if not specified, do the move using
33330 the current size unchanged.
33332 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33334 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
33335 Author: Gerald Van Baren <vanbaren@cideas.com>
33336 Date: Wed Apr 25 22:23:36 2007 -0400
33338 Minor code clean up.
33340 Declare the variable fdt properly as extern.
33341 Call the "set_fn" function pointer the "short way" without the full
33342 dereferencing syntax.
33344 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33346 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
33347 Author: Gerald Van Baren <vanbaren@cideas.com>
33348 Date: Wed Apr 25 21:24:27 2007 -0400
33350 Improve error messages, more informative.
33352 Print more than the raw libfdt error message strings. This is especially
33353 useful for cluing in the user when the bootm command aborts due to
33356 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33358 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
33359 Author: Gerald Van Baren <vanbaren@cideas.com>
33360 Date: Fri Apr 20 22:46:53 2007 -0400
33362 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
33364 This is the way u-boot reduces configured-out code. At Wolfgang
33365 Grandegger and Wolfgang Denk's request, make libfdt conform.
33367 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33369 commit 923efd286411ed052d9e074f59f8986d6081061c
33370 Author: Bruce Adler <bruce.adler@ccpu.com>
33371 Date: Fri Aug 10 14:54:47 2007 -0700
33373 add image size and descriptors for Spartan 3E FPGA chips
33375 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
33377 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
33379 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
33380 Author: Kim Phillips <kim.phillips@freescale.com>
33381 Date: Fri Aug 10 15:34:48 2007 -0500
33383 make MAKEALL more immune to merge conflicts
33385 ..by placing board entries one per line, as suggested by jdl.
33387 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33389 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
33390 Author: Kim Phillips <kim.phillips@freescale.com>
33391 Date: Fri Aug 10 13:28:25 2007 -0500
33393 README: Remove outdated cpu type, board type, and NAME_config lists
33395 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33397 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
33398 Author: Dave Liu <r63238@freescale.com>
33399 Date: Fri Aug 10 15:48:59 2007 +0800
33401 mpc83xx: Suppress the warning 'burstlen'
33403 suppress the warning 'burstlen' of spd_sdram.
33405 Signed-off-by: Dave Liu <daveliu@freescale.com>
33407 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
33408 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33409 Date: Thu Aug 9 15:11:03 2007 -0500
33411 Add support for SBC8641D. Config files.
33413 Add support for Wind River's SBC8641D reference board.
33415 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33416 Acked-by: Wolfgang Denk <wd@denx.de>
33417 Acked-by: Jon Loeliger <jdl@freescale.com>
33419 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
33420 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33421 Date: Thu Aug 9 15:10:53 2007 -0500
33423 Add support for SBC8641D. Board files.
33425 Add support for Wind River's SBC8641D reference board.
33427 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33428 Acked-by: Wolfgang Denk <wd@denx.de>
33429 Acked-by: Jon Loeliger <jdl@freescale.com>
33431 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
33432 Author: Stefan Roese <sr@denx.de>
33433 Date: Fri Aug 10 20:34:58 2007 +0200
33435 Conding style cleanup
33437 Signed-off-by: Stefan Roese <sr@denx.de>
33439 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
33440 Author: Sergey Kubushyn <ksi@koi8.net>
33441 Date: Fri Aug 10 20:26:18 2007 +0200
33443 [ARM] TI DaVinci support, hopefully final
33445 Add support for the following DaVinci boards:
33452 - Split into separate board directories
33453 - Removed changes to MTD_DEBUG (or whatever it's called)
33454 - New CONFIG_CMD party line followed
33455 - Some cosmetic fixes, cleanup etc.
33456 - Patches against the latest U-Boot tree as of now.
33457 - Fixed CONFIG_CMD_NET in net files.
33458 - Fixed CONFIG_CMD_EEPROM for schmoogie.
33459 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
33460 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
33461 but it at least compiles.
33463 Here is an excerpt from session log on SCHMOOGIE...
33465 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
33474 ETH PHY : DP83848 @ 0x01
33476 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
33477 U-Boot > ping 192.168.253.10
33478 host 192.168.253.10 is alive
33481 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
33482 Acked-by: Dirk Behme <dirk.behme@gmail.com>
33483 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
33484 Acked-by: Stefan Roese <sr@denx.de>
33486 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
33487 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
33488 Date: Fri Jul 27 01:50:45 2007 -0500
33490 fsl_pci_init cleanup.
33492 Do not enable normal errors created during probe (master abort, perr,
33493 and pcie Invalid Configuration access).
33495 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
33497 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33498 Acked-by: Andy Fleming <afleming@freescale.com>
33500 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
33501 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
33502 Date: Fri Jul 27 01:50:44 2007 -0500
33504 pciauto_setup_device bars_num fix
33506 Passing bars_num=0 to pciauto_setup_device should assign no bars.
33508 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33509 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
33510 Acked-by: Andy Fleming <afleming@freescale.com>
33512 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
33513 Author: Jon Loeliger <jdl@freescale.com>
33514 Date: Mon Aug 6 17:39:44 2007 -0500
33516 8641hpcn: Do correct sized pointer math.
33518 When I rebased Ed's patch and cleaned up a few compilation
33519 problems, I apparently rebased my brain on crack first.
33520 Fix that by doing (char *) sized pointer math as needed.
33522 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33524 commit cfc7a7f5bb3273c9951173c788001d45118f141f
33525 Author: Jon Loeliger <jdl@freescale.com>
33526 Date: Thu Aug 2 14:42:20 2007 -0500
33530 Remove rev 1 fixes.
33531 Always set PICGCR_MODE.
33532 Enable machine check and provide board config option
33533 to set and handle SoC error interrupts.
33535 Include MSSSR0 in error message.
33537 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
33539 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33540 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33542 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
33543 Author: Stefan Roese <sr@denx.de>
33544 Date: Fri Aug 10 10:42:25 2007 +0200
33546 Coding style cleanup
33548 Signed-off-by: Stefan Roese <sr@denx.de>
33550 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
33551 Author: Dirk Behme <dirk.behme@googlemail.com>
33552 Date: Thu Aug 2 17:42:08 2007 +0200
33554 Make use of generic 64bit division in nand_util.c
33556 Use generic 64bit division in nand_util.c. This makes nand_util.c
33557 independent of any toolchain 64bit division.
33559 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
33561 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
33562 Author: Dirk Behme <dirk.behme@googlemail.com>
33563 Date: Thu Aug 2 17:41:14 2007 +0200
33565 Move 64bit division from avr32 to generic lib
33567 Move the 64bit division from lib_avr32 to lib_generic. With this, all
33568 boards can do_div/__div64_32 if needed, not only avr one. Code is put
33569 to lib_generic, so no larger memory footprint if not used. No code
33570 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
33572 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
33574 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
33575 Author: Niklaus Giger <niklausgiger@gmx.ch>
33576 Date: Fri Jul 27 11:31:22 2007 +0200
33578 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
33580 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33582 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
33583 Author: Niklaus Giger <niklausgiger@gmx.ch>
33584 Date: Fri Jul 27 11:30:33 2007 +0200
33586 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
33588 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33590 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
33591 Author: Niklaus Giger <niklausgiger@gmx.ch>
33592 Date: Fri Jul 27 11:38:26 2007 +0200
33594 Add PPC4xx-HCU4 and HCU5 boards: common files
33596 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33598 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
33599 Author: Niklaus Giger <niklausgiger@gmx.ch>
33600 Date: Fri Jul 27 11:28:44 2007 +0200
33602 Add PPC4xx-HCU4 and HCU5 boards: make related
33604 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33606 commit 137fdd9f474ecb853efdace5200576308c67f18d
33607 Author: Niklaus Giger <niklausgiger@gmx.ch>
33608 Date: Fri Jul 27 11:28:03 2007 +0200
33610 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
33612 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33614 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
33615 Author: Niklaus Giger <niklausgiger@gmx.ch>
33616 Date: Fri Jul 27 11:27:15 2007 +0200
33618 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
33620 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33622 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
33623 Author: Niklaus Giger <niklausgiger@gmx.ch>
33624 Date: Fri Jul 27 11:25:31 2007 +0200
33626 Add PPC4xx-HCU4 and HCU5 boards: READMEs
33628 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33630 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
33631 Author: Niklaus Giger <niklausgiger@gmx.ch>
33632 Date: Fri Jul 27 11:37:40 2007 +0200
33634 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
33636 This series of patches adds support for 2 boards from Netstal Maschinen.
33638 The HCU4 has a PPC405Gpr and
33639 the HCU5 has a PPC440EPX.
33641 The HCU4 has a somehow complicated flash setup, as the booteprom is
33642 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
33645 The HCU5 has only a booteprom as the whole code will be downloaded from a
33646 different board which has HD, CD-ROM, etc and where all code is stored.
33648 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
33651 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33653 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
33654 Author: Stefan Roese <sr@denx.de>
33655 Date: Fri Aug 10 08:42:55 2007 +0200
33657 ppc4xx: Update lwmon5 POST configuration
33659 Signed-off-by: Stefan Roese <sr@denx.de>
33661 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
33662 Author: Yuri Tikhonov <yur@emcraft.com>
33663 Date: Fri Aug 10 08:25:22 2007 +0200
33665 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
33667 The patch adds support for UART POST on ppc44x-based boards with no
33668 external serial clocks installed.
33670 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
33671 Acked-by: Stefan Roese <sr@denx.de>
33673 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
33674 Author: Kim Phillips <kim.phillips@freescale.com>
33675 Date: Mon Aug 6 18:18:34 2007 -0500
33677 mpc83xx: fix ITX[GP] O=builddir builds
33679 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
33681 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
33682 "BUILD_DIR=<some dir> ./MAKEALL ..."
33684 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33686 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
33687 Author: Dave Liu <r63238@freescale.com>
33688 Date: Wed Aug 1 15:00:59 2007 +0800
33690 mpc83xx: Correct the README for DDR ECC
33692 Update the README for DDR ECC, change the name
33693 to README.mpc83xx.ddrecc.
33695 Signed-off-by: Dave Liu <daveliu@freescale.com>
33696 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33698 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
33699 Author: Dave Liu <r63238@freescale.com>
33700 Date: Wed Aug 1 15:00:15 2007 +0800
33702 mpc83xx: Consolidate the ECC support of 83xx
33704 Remove the duplicated source code of ecc command on the <board>.c,
33705 for reused, move these code to cpu/mpc83xx directory.
33707 Signed-off-by: Dave Liu <daveliu@freescale.com>
33708 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33710 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
33711 Author: Dave Liu <r63238@freescale.com>
33712 Date: Sat Aug 4 13:37:39 2007 +0800
33714 mpc83xx: Correct the burst length for DDR2 with 32 bits
33716 The burst length should be 4 for DDR2 with 32 bits bus
33718 Signed-off-by: Dave Liu <daveliu@freescale.com>
33720 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
33721 Author: Kim Phillips <kim.phillips@freescale.com>
33722 Date: Wed Jul 25 19:25:33 2007 -0500
33724 mpc83xx: add support for the MPC8323E RDB
33726 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
33727 five 10/100 ethernet ports connected via an ICPlus IP175C
33728 switch, one PCI slot, and serial. Features not supported
33729 in this patch are SD card interface, 2 USB ports, and the
33732 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
33733 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33735 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
33736 Author: Kim Phillips <kim.phillips@freescale.com>
33737 Date: Wed Jul 25 19:25:28 2007 -0500
33739 mpc83xx: fixup generic pci for libfdt
33741 add libfdt support to the generic 83xx pci code
33743 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33745 commit f57ac7a7b37109245b69db80839ebee26179966a
33746 Author: Kim Phillips <kim.phillips@freescale.com>
33747 Date: Wed Jul 25 19:25:22 2007 -0500
33749 mpc83xx: fix 8360 and cpu functions to update fdt being passed
33751 ..and not the global fdt. Rename local fdt vars to blob so as not to
33752 be confused with the global var with the same three-letter name.
33754 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33756 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
33757 Author: Jerry Van Baren <gvb.uboot@gmail.com>
33758 Date: Wed Jul 4 21:34:24 2007 -0400
33760 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
33762 Several node strings were not correct (trailing slashes and properties
33764 Added setting of the timebase-frequency.
33765 Improved error messages and use debug() instead of printf().
33767 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33768 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33770 commit 26d02c9bbac1751c5e19294f000100b48d43a920
33771 Author: Jerry Van Baren <gvb.uboot@gmail.com>
33772 Date: Wed Jul 4 21:27:30 2007 -0400
33774 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
33776 The new name matches more closely the kernel's name, which is also
33777 a much better description.
33779 These are the mpc83xx changes made necessary by the function name change.
33781 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
33782 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33783 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33785 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
33786 Author: Dave Liu <daveliu@freescale.com>
33787 Date: Mon Jun 25 10:41:56 2007 +0800
33789 mpc83xx: Add support for the display of reset status
33791 83xx processor family has many reset sources, such as
33792 power on reset, software hard reset, software soft reset,
33793 JTAG, bus monitor, software watchdog, check stop reset,
33794 external hard reset, external software reset.
33795 sometimes, to figure out the fault of system, we need to
33796 know the cause of reset early before the prompt of
33799 Signed-off-by: Dave Liu <daveliu@freescale.com>
33800 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33802 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
33803 Author: Dave Liu <daveliu@freescale.com>
33804 Date: Mon Jun 25 10:41:04 2007 +0800
33806 mpc83xx: Fix the align bug of SDMA buffer
33808 According to the latest user manual, the SDMA temporary
33809 buffer base address must be 4KB aligned.
33811 Signed-off-by: Dave Liu <daveliu@freescale.com>
33812 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33814 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
33815 Author: Dave Liu <daveliu@freescale.com>
33816 Date: Mon Jun 25 13:21:12 2007 +0800
33818 mpc83xx: Revise the MPC8360EMDS readme doc
33820 When the rev2.x silicon mount on the MPC8360EMDS baord,
33821 and if you are using the u-boot version after the commit
33822 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
33823 to make the ethernet interface usable, we have to setup
33824 the jumpers correctly.
33826 Signed-off-by: Dave Liu <daveliu@freescale.com>
33827 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33829 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
33830 Author: Timur Tabi <timur@freescale.com>
33831 Date: Tue Jul 3 13:46:32 2007 -0500
33833 FSL I2C driver programs the two I2C busses differently
33835 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
33836 The second I2C bus has its slave address programmed incorrectly and is
33837 missing a 5-us delay.
33839 Signed-off-by: Timur Tabi <timur@freescale.com>
33840 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33842 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
33843 Author: Timur Tabi <timur@freescale.com>
33844 Date: Tue Jul 3 13:04:34 2007 -0500
33846 Update SCCR programming in cpu_init_f() to support all 83xx processors
33848 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
33849 bitfields for all 83xx processors. The code to update some bitfields was
33850 compiled only on some processors. Now, the bitfields are programmed as long
33851 as the corresponding CFG_SCCR option is defined in the board header file.
33852 This means that the board header file should not define any CFG_SCCR macros
33853 for bitfields that don't exist on that processor, otherwise the SCCR will be
33854 programmed incorrectly.
33856 Signed-off-by: Timur Tabi <timur@freescale.com>
33857 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33859 commit 9546266999f0b9b51372636614211b88d90f0f25
33860 Author: Martin Krause <martin.krause@tqs.de>
33861 Date: Fri Jun 22 13:04:22 2007 +0200
33863 TQM834x: cleanup configuraton
33865 Remove irritating #undef DEBUG
33867 Signed-off-by: Martin Krause <martin.krause@tqs.de>
33868 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33870 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
33871 Author: david.saada <David.Saada@ecitele.com>
33872 Date: Mon Jun 18 09:09:53 2007 -0700
33874 MPC83xx: Fix makefile to generate config.h file in the build directory
33876 MPC83xx: Fix the Makefile config sections to generate the include/config.h
33877 file in the build directory instead of the source directory.
33879 Signed-off-by: David Saada <david.saada@ecitele.com>
33880 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33882 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
33883 Author: Lee Nipper <Lee.Nipper@freescale.com>
33884 Date: Thu Jun 14 20:07:33 2007 -0500
33886 mpc83xx: Add support for 8360 silicon revision 2.1
33888 This change adds 8360 silicon revision 2.1 support to u-boot.
33890 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
33891 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33893 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
33894 Author: Kumar Gala <galak@kernel.crashing.org>
33895 Date: Wed Aug 8 04:14:28 2007 -0500
33897 Treat ppc64 host as ppc
33899 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33901 commit 0dc4279b08ff82472bec2e2c90858602459febe8
33902 Author: Jason Jin <Jason.jin@freescale.com>
33903 Date: Wed Aug 8 09:01:46 2007 +0800
33905 Minor fix for bios emulator makefile
33907 Add $(obj) to LIB avoiding objects be built in the source dir
33909 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33911 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
33912 Author: Jason Jin <Jason.jin@freescale.com>
33913 Date: Wed Aug 8 08:33:11 2007 +0800
33915 Add CONFIG_BIOSEMU define to guard all the bios emulator code
33917 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33919 This patch fix the compile issue on the board that did not enable the bios emulator
33921 commit ed8106433522f2ea8933e9808346860d061d7731
33922 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
33923 Date: Tue Jul 31 12:27:25 2007 -0500
33925 tsec: fix multiple PHY support
33927 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
33928 broke multiple PHY support in tsec.c. This fixes it.
33930 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
33931 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33933 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
33934 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33935 Date: Thu Aug 9 09:08:18 2007 -0500
33937 tsec: Allow Ten Bit Interface address to be configurable
33939 Allow the address of the Ten Bit Interface (TBI) to be changed in the
33940 event of a conflict with another device.
33942 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33944 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
33945 Author: Stefan Roese <sr@denx.de>
33946 Date: Wed Aug 8 09:54:26 2007 +0200
33948 Coding style cleanup
33950 Signed-off-by: Stefan Roese <sr@denx.de>
33952 commit a41de1f0d373e09c782dea558385a06247111ba5
33953 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33954 Date: Sun Aug 5 05:15:18 2007 -0500
33956 Port enabled for I2C signals and chipselects port configuration.
33958 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33960 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
33961 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33962 Date: Sun Aug 5 04:31:18 2007 -0500
33966 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33968 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
33969 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33970 Date: Sun Aug 5 04:11:20 2007 -0500
33974 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33976 commit 99c03c175d2689093176facf17c58ce2cb320001
33977 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33978 Date: Sun Aug 5 03:58:52 2007 -0500
33980 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
33982 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33984 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
33985 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33986 Date: Sun Aug 5 03:55:21 2007 -0500
33988 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
33990 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33992 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
33993 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33994 Date: Sun Aug 5 03:43:30 2007 -0500
33996 Moved sync() from board file to include/asm-m68k/io.h
33998 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34000 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
34001 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34002 Date: Sun Aug 5 03:30:44 2007 -0500
34004 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
34006 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34008 commit 9998bd37ead85e93953559720710d3b0685c81e6
34009 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34010 Date: Sun Aug 5 03:19:10 2007 -0500
34012 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
34014 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34016 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
34017 Author: Jason Jin <Jason.jin@freescale.com>
34018 Date: Tue Aug 7 16:17:06 2007 +0800
34020 Add CONFIG_BIOSEMU define to guard all the bios emulator code
34022 This patch fix the compile issue on the board that did not enable the bios emulator
34024 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
34025 Author: Wolfgang Denk <wd@denx.de>
34026 Date: Tue Aug 7 16:02:13 2007 +0200
34028 Fix missing brace error in fs/fat/fat.c
34029 [pointed out by Roderik Wildenburg]
34031 Signed-off-by: Wolfgang Denk <wd@denx.de>
34033 commit 706714d97a0d08d59eda4de2268c39f504688329
34034 Author: Michal Simek <monstr@monstr.eu>
34035 Date: Mon Aug 6 23:41:53 2007 +0200
34037 [FIX] remove cute code
34039 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
34040 Author: Michal Simek <monstr@monstr.eu>
34041 Date: Mon Aug 6 23:35:26 2007 +0200
34043 [FIX] Fix romfs code
34045 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
34046 Author: Michal Simek <monstr@monstr.eu>
34047 Date: Mon Aug 6 23:31:49 2007 +0200
34049 [FIX] Coding style cleanup - Wolfgang's suggestions
34051 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
34052 Author: Wolfgang Denk <wd@denx.de>
34053 Date: Mon Aug 6 23:21:05 2007 +0200
34055 Fixed typo in README (pointed out by Martin Jost).
34057 Signed-off-by: Wolfgang Denk <wd@denx.de>
34059 commit 537223afa61f64480df31ce440a9cb386df4a814
34060 Author: Stefan Roese <sr@denx.de>
34061 Date: Mon Aug 6 21:10:17 2007 +0200
34063 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
34065 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
34066 here an updated Bamboo README.
34068 Signed-off-by: Stefan Roese <sr@denx.de>
34070 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
34071 Author: Wolfgang Denk <wd@denx.de>
34072 Date: Mon Aug 6 02:17:36 2007 +0200
34074 Coding style cleanup. Update CHANGELOG.
34076 Signed-off-by: Wolfgang Denk <wd@denx.de>
34078 commit 221838cc7eb178370ff62aa05920a582e12ac322
34079 Author: Jason Jin <Jason.jin@freescale.com>
34080 Date: Tue Jul 10 09:03:22 2007 +0800
34082 Remove the bios emulator from MAI board.
34084 The bios emulator in the MAI board can not pass compile
34085 and have a lot of crap in it. remove it and will have a
34086 clean and small bios emulator in the drivers directory
34087 which can be uesed for every board.
34089 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34091 commit 5618332409bb96f4448d1712899369fc80c0b489
34092 Author: Jason Jin <Jason.jin@freescale.com>
34093 Date: Fri Jul 13 12:14:59 2007 +0800
34095 Fix some compile issues for MAI board.
34097 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34099 commit 0f460a1ee148b648ee242c3157650287d4296260
34100 Author: Jason Jin <Jason.jin@freescale.com>
34101 Date: Fri Jul 13 12:14:58 2007 +0800
34103 Configurations for ATI video card BIOS emulator
34105 This patch add definition of the BIOS emulator and the ATI framebuffer
34106 driver for MPC8641HPCN board.
34108 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34109 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34111 commit ece92f85053b8df613edcf05b26a416cbc3d629c
34112 Author: Jason Jin <Jason.jin@freescale.com>
34113 Date: Fri Jul 6 08:34:56 2007 +0800
34115 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
34116 ATI video card BIOS. and can be used for x86 code emulation by some
34119 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34121 commit 5072188acabde3178fac7f5a597150e6e74fd40c
34122 Author: Jason Jin <Jason.jin@freescale.com>
34123 Date: Fri Jul 6 08:33:33 2007 +0800
34125 This is a framebuffer driver for ATI video card, can work for PCI9200,
34126 X300, X700, X800 ATI video cards.
34128 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34129 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34131 commit 5728be389e65fd47f34b33c2596271eb4db751ae
34132 Author: Wolfgang Denk <wd@denx.de>
34133 Date: Mon Aug 6 01:01:49 2007 +0200
34135 Coding style cleanup. Update CHANGELOG.
34137 Signed-off-by: Wolfgang Denk <wd@denx.de>
34139 commit 8092fef4c29b395958bb649647da7e3775731517
34140 Author: Martin Krause <Martin.Krause@tqs.de>
34141 Date: Tue Dec 12 14:26:01 2006 +0100
34143 Add functions to list of exported functions
34145 Additionally export the following fuctions (to make trab_config build again):
34149 Also bump the ABI version to reflect this change
34151 Signed-off-by: Martin Krause <martin.krause@tqs.de>
34153 commit 63cec5814fab5d2b1c86982327433807a5ac0249
34154 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34155 Date: Thu Aug 2 14:09:49 2007 -0500
34157 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
34159 All of the PCI/PCI-Express driver and initialization code that
34160 was in the MPC8641HPCN port has now been moved into the common
34161 drivers/fsl_pci_init.c. In a subsequent patch, this will be
34162 utilized by the 85xx ports as well.
34164 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
34166 Also enable the second PCI-Express controller on 8641
34167 by getting its BATS and CFG_ setup right.
34169 Fixed a u16 vendor compiler warning in AHCI driver too.
34171 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34172 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34173 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34175 commit a274ca4f6d68830e7c916f897561cff8c4101c38
34176 Author: Michal Simek <monstr@monstr.eu>
34177 Date: Sun Aug 5 22:33:05 2007 +0200
34179 [FIX] Coding style cleanup
34181 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
34182 Author: Michal Simek <monstr@monstr.eu>
34183 Date: Sun Aug 5 16:13:31 2007 +0200
34185 [FIX] Xilinx Uartlite driver
34186 Because PPC405 can use UARTLITE serial interface and
34187 Microblaze can use Uart16550 serial interface not only Uartlite.
34189 commit 98889edd50aadf862071eb5664747ad0d568a20e
34190 Author: Michal Simek <monstr@monstr.eu>
34191 Date: Sun Aug 5 15:54:53 2007 +0200
34193 [FIX] Change configuration for XUPV2P Microblaze board
34195 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
34196 Author: Michal Simek <monstr@monstr.eu>
34197 Date: Sun Aug 5 15:53:50 2007 +0200
34199 [PATCH] Added support for Xilinx Emac community driver
34201 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
34202 Author: Bartlomiej Sieka <tur@semihalf.com>
34203 Date: Fri Aug 3 12:08:16 2007 +0200
34205 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
34207 Add the ability for modules from the Schindler cm5200 family to use a
34208 single U-Boot image:
34209 - rename cm1_qp1 to cm5200
34210 - add run-time module detection
34211 - parametrize SDRAM configuration according to the module we are running on
34213 Few minor, board-specific fixes included in this patch:
34214 - better MAC address handling
34215 - updated default environment ('update' command uses +{filesize} now)
34216 - improved error messages in the auto-update code
34217 - allow booting U-Boot from RAM (CFG_RAMBOOT)
34219 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34220 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
34221 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34223 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
34224 Author: Andy Fleming <afleming@freescale.com>
34225 Date: Fri Aug 3 04:05:25 2007 -0500
34227 Add Marvell 1149 PHY support to the TSEC
34229 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
34230 Author: Wolfgang Denk <wd@denx.de>
34231 Date: Thu Aug 2 21:27:46 2007 +0200
34233 Coding style cleanup, update CHANGELOG
34235 Signed-off-by: Wolfgang Denk <wd@denx.de>
34237 commit 63e22764d2f8653f68888c667eb65b3996b52680
34238 Author: Wolfgang Denk <wd@denx.de>
34239 Date: Thu Aug 2 10:11:18 2007 +0200
34241 Minor cleanup of <board>_nand build rules.
34243 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
34244 Author: Stefan Roese <sr@denx.de>
34245 Date: Thu Aug 2 08:33:56 2007 +0200
34247 ppc4xx: Code cleanup
34249 Signed-off-by: Stefan Roese <sr@denx.de>
34251 commit c92409812206ac67a7fa7aae298539a9c3804a46
34252 Author: Grzegorz Bernacki <gjb@semihalf.com>
34253 Date: Tue Jul 31 18:51:48 2007 +0200
34255 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
34257 During config transactions on the PCIe bus an attempt to scan for a
34258 non-existent device can lead to a machine check exception with certain
34259 peripheral devices. In order to avoid crashing in such scenarios the
34260 instrumented versions of the config cycle read routines are introduced, so
34261 the exceptions fixups framework can gracefully recover.
34263 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34264 Acked-by: Rafal Jaworowski <raj@semihalf.com>
34266 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
34267 Author: Rafal Jaworowski <raj@semihalf.com>
34268 Date: Tue Jul 31 18:19:54 2007 +0200
34270 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
34272 This brings back separate settings for PCIe bus numbers depending on chip
34273 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
34274 commit. 440SPe rev. A does NOT work properly with the same settings as for
34275 the rev. B (no devices are seen on the bus during enumeration).
34277 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34279 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
34280 Author: Wolfgang Denk <wd@denx.de>
34281 Date: Thu Aug 2 00:48:45 2007 +0200
34283 Fix build errors and warnings / code cleanup.
34285 Signed-off-by: Wolfgang Denk <wd@denx.de>
34287 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
34288 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
34289 Date: Tue Jul 31 10:24:56 2007 +0200
34291 ppc4xx: Update AMCC Bamboo 440EP support
34293 Changed storage type of cfg_simulate_spd_eeprom to const
34294 Changed storage type of gpio_tab to stack storage
34295 (Cannot access global data declarations in .bss until afer code relocation)
34297 Improved SDRAM tests to catch problems where data is not uniquely addressable
34298 (e.g. incorrectly programmed SDRAM row or columns)
34300 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
34301 Fixed AM29LV320DT (OpCode Flash) sector map
34303 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
34304 Signed-off-by: Stefan Roese <sr@denx.de>
34306 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
34307 Author: Stefan Roese <sr@denx.de>
34308 Date: Tue Jul 31 08:37:01 2007 +0200
34310 ppc4xx: Update 440EPx lwmon5 board support
34312 - Clear ECC status regs after ECC POST test
34313 - Set dcbz for ECC generation with caches enabled as default
34316 Signed-off-by: Stefan Roese <sr@denx.de>
34318 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
34319 Author: Stefan Roese <sr@denx.de>
34320 Date: Mon Jul 30 11:04:57 2007 +0200
34322 ppc4xx: Only print ECC related info when the error bis are set
34324 Signed-off-by: Stefan Roese <sr@denx.de>
34326 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
34327 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
34328 Date: Fri Jul 27 16:44:31 2007 +0200
34330 new FPGA image for PLU405 board
34332 new FPGA image for PLU405 board with improved CompactFlash timing
34334 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
34336 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
34337 Author: Rafal Jaworowski <raj@semihalf.com>
34338 Date: Fri Jul 27 14:43:59 2007 +0200
34340 [ADS5121] Support for the ADS5121 board
34342 The following MPC5121e subsystems are supported:
34344 - low-level CPU init
34345 - NOR Boot Flash (common CFI driver)
34351 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34352 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34353 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
34355 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
34356 Author: Rafal Jaworowski <raj@semihalf.com>
34357 Date: Fri Jul 27 14:22:04 2007 +0200
34359 [PPC] Remove unused MSR_USER definition
34361 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34363 commit d4024bb72dd81695ec099b2199eda0d27c623e62
34364 Author: John Otken <john@softadvances.com>
34365 Date: Thu Jul 26 17:49:11 2007 +0200
34367 ppc4xx: Add support for AMCC 405EP Taihu board
34369 Signed-off-by: John Otken <john@softadvances.com>
34371 commit b66091de6c7390620312c2501db23d8391e7cabb
34372 Author: Anatolij Gustschin <agust@denx.de>
34373 Date: Thu Jul 26 15:08:01 2007 +0200
34375 ppc4xx: lwmon5: Update Lime initialization
34377 Change Lime SDRAM initialization to now support 100MHz and
34378 133MHz (if enabled). Also the framebuffer is initialized to
34379 display a blue rectangle with a white border.
34381 Signed-off-by: Anatolij Gustschin <agust@denx.de>
34382 Signed-off-by: Stefan Roese <sr@denx.de>
34384 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
34385 Author: Stefan Roese <sr@denx.de>
34386 Date: Tue Jul 24 09:52:52 2007 +0200
34388 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
34390 The used Intel NOR FLASH chips have internally two dies, and are now
34391 treated as two seperate chips.
34393 Signed-off-by: Stefan Roese <sr@denx.de>
34395 commit aedf5bde179ecfbd0a96130d18996a96518b785f
34396 Author: Stefan Roese <sr@denx.de>
34397 Date: Tue Jul 24 07:20:09 2007 +0200
34399 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
34401 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
34402 interrupt controller.
34404 Signed-off-by: Stefan Roese <sr@denx.de>
34406 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
34407 Author: Stefan Roese <sr@denx.de>
34408 Date: Fri Jul 20 15:03:44 2007 +0200
34410 ppc4xx: Fix bug with default GPIO output value
34412 As spotted by Matthias Fuchs, the default output values for all GPIO1
34413 outputs were not setup correctly. This patch fixes this issue.
34415 Signed-off-by: Stefan Roese <sr@denx.de>
34417 commit 531e3e8b831f357056448fa573137d5fb37000fd
34418 Author: Pavel Kolesnikov <concord@emcraft.com>
34419 Date: Fri Jul 20 15:03:03 2007 +0200
34421 POST: Add ECC POST for the lwmon5 board
34423 This patch adds ECC Post test for the Lwmon5 board based
34424 on PPC440EPx to U-Boot.
34426 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
34427 Acked-by: Yuri Tikhonov <yur@emcraft.com>
34428 Acked-by: Stefan Roese <sr@denx.de>
34430 commit cc3023b9f95d7ac959a764471a65001062aecf41
34431 Author: Rafal Jaworowski <raj@semihalf.com>
34432 Date: Thu Jul 19 17:12:28 2007 +0200
34434 Fix breakage of 8xx boards from recent commit.
34436 This patch fixes the negative consequences for 8xx of the recent
34437 "ppc4xx: Clean up 440 exceptions handling" commit.
34439 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34441 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
34442 Author: Stefan Roese <sr@denx.de>
34443 Date: Mon Jul 16 13:11:12 2007 +0200
34445 Coding style cleanup
34447 Signed-off-by: Stefan Roese <sr@denx.de>
34449 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
34450 Author: Stefan Roese <sr@denx.de>
34451 Date: Mon Jul 16 10:02:12 2007 +0200
34453 ppc4xx: Code cleanup
34455 Signed-off-by: Stefan Roese <sr@denx.de>
34457 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
34458 Author: Stefan Roese <sr@denx.de>
34459 Date: Mon Jul 16 10:01:38 2007 +0200
34461 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
34463 Signed-off-by: Stefan Roese <sr@denx.de>
34465 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
34466 Author: Stefan Roese <sr@denx.de>
34467 Date: Mon Jul 16 10:00:43 2007 +0200
34469 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
34471 The new boardspecific DDR2 controller configuration is used for the Yucca
34472 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
34474 Signed-off-by: Stefan Roese <sr@denx.de>
34476 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
34477 Author: Stefan Roese <sr@denx.de>
34478 Date: Mon Jul 16 09:57:00 2007 +0200
34480 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
34482 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
34483 support non default, boardspecific DDR(2) controller configuration.
34485 Signed-off-by: Stefan Roese <sr@denx.de>
34487 commit 5743a9207a370b90f09b20ebd61167c806b937f3
34488 Author: Stefan Roese <sr@denx.de>
34489 Date: Mon Jul 16 08:53:51 2007 +0200
34491 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
34493 The new function remove_tlb() can be used to remove the TLB's used to
34494 map a specific memory region. This is especially useful for the DDR(2)
34495 setup routines which configure the SDRAM area temporarily as a cached
34496 area (for speedup on auto-calibration and ECC generation) and later
34497 need this area uncached for normal usage.
34499 Signed-off-by: Stefan Roese <sr@denx.de>
34501 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
34502 Author: Michal Simek <monstr@monstr.eu>
34503 Date: Mon Jul 16 00:31:07 2007 +0200
34505 [PATCH] Support for Xilinx EmacLite controller
34507 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
34508 Author: Wolfgang Denk <wd@denx.de>
34509 Date: Sat Jul 14 22:51:02 2007 +0200
34513 Signed-off-by: Wolfgang Denk <wd@denx.de>
34515 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
34516 Author: Michal Simek <monstr@monstr.eu>
34517 Date: Sat Jul 14 13:11:28 2007 +0200
34519 [FIX] support for simply measuring time
34521 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
34522 Author: Michal Simek <monstr@monstr.eu>
34523 Date: Sat Jul 14 12:41:23 2007 +0200
34525 [FS] Added support for ROMFS
34527 commit 011595307731a7a67a7445d107c279d031e8ab97
34528 Author: Heiko Schocher <hs@pollux.denx.de>
34529 Date: Sat Jul 14 01:06:58 2007 +0200
34531 [PCS440EP] - fix compile error, if BUILD_DIR is used
34533 commit 5a2f1098d81ad58b309e5e558d0492643166a799
34534 Author: Michal Simek <monstr@monstr.eu>
34535 Date: Sat Jul 14 00:18:48 2007 +0200
34537 [PATCH] Support time without timer
34539 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
34540 Author: Michal Simek <monstr@monstr.eu>
34541 Date: Fri Jul 13 21:43:55 2007 +0200
34543 [PATCH] Remove problem with disabled BARREL SHIFTER
34545 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
34546 Author: Michal Simek <monstr@monstr.eu>
34547 Date: Fri Jul 13 21:41:44 2007 +0200
34549 [FIX] correct help for rspr
34551 commit fad63407154f46246ce80d53a9c669a44362ac67
34552 Author: Heiko Schocher <hs@pollux.denx.de>
34553 Date: Fri Jul 13 09:54:17 2007 +0200
34555 make show_boot_progress () weak.
34557 Signed-off-by: Heiko Schocher <hs@denx.de>
34559 commit 907902472391b6ca1876ec300687562ecaf459b1
34560 Author: Heiko Schocher <hs@pollux.denx.de>
34561 Date: Fri Jul 13 08:26:05 2007 +0200
34563 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
34564 - fix compile error, if BUILD_DIR is used
34566 Signed-off-by: Heiko Schocher <hs@denx.de>
34568 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
34569 Author: Stefan Roese <sr@denx.de>
34570 Date: Thu Jul 12 16:32:08 2007 +0200
34572 ppc4xx: Change receive buffer handling in the 4xx emac driver
34574 This change fixes a bug in the receive buffer handling, that
34575 could lead to problems upon high network traffic (broadcasts...).
34577 Signed-off-by: Stefan Roese <sr@denx.de>
34579 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
34580 Author: Wolfgang Denk <wd@denx.de>
34581 Date: Thu Jul 12 01:45:34 2007 +0200
34583 Update CHANGELOG, minor coding style cleanup.
34585 Signed-off-by: Wolfgang Denk <wd@denx.de>
34587 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
34588 Author: Andy Fleming <afleming@freescale.com>
34589 Date: Fri Jun 8 16:41:18 2007 -0500
34591 Remove erroneous errata code from Marvel 88E1111S driver
34593 The Marvel 88E1111S driver for the TSEC was copied from the
34594 88E1101 driver, and included a fix for an erratum which does not
34595 exist on that part. Now it is removed
34597 Signed-off-by: Andy Fleming <afleming@freescale.com>
34599 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
34600 Author: Andy Fleming <afleming@freescale.com>
34601 Date: Tue Jun 5 16:38:44 2007 -0500
34603 From: eran liberty <eran.liberty@gmail.com>
34605 adds the reset register to 85xx immap
34607 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
34608 Signed-off-by: Andy Fleming <afleming@freescale.com>
34610 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
34611 Author: Andy Fleming <afleming@freescale.com>
34612 Date: Thu May 10 17:50:01 2007 -0500
34614 Polished the 85xx ADS config files
34616 Made the boot commands use device trees by default.
34617 Also moved the ramdisk to 1000000 (I think the previous address
34618 was getting overridden during boot).
34620 Signed-off-by: Andy Fleming <afleming@freescale.com>
34622 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
34623 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34624 Date: Wed May 9 11:03:32 2007 -0500
34626 8544ds: Fix Makefile after moving pixis to board/freescale.
34628 The OBJTREE != SRCTREE build scenario was broken.
34631 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34632 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34634 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
34635 Author: Andy Fleming <afleming@freescale.com>
34636 Date: Wed May 9 00:54:20 2007 -0500
34638 tsec: Fix PHY code to match first driver
34640 Jarrold Wen noticed that the generic PHY code always matches
34641 under the current implementation. Change it so the first match
34642 wins, and *only* unknown PHYs trigger the generic driver
34644 Signed-off-by: Andy Fleming <afleming@freescale.com>
34646 commit ccc091aac61a38cd998d575d92f7232e256d6312
34647 Author: Andy Fleming <afleming@freescale.com>
34648 Date: Tue May 8 17:27:43 2007 -0500
34650 Add support for CPM device tree configuration to 8560 ADS
34652 * Adds code to modify CPM frequencies
34653 * Cleans up the config file to #define TSEC and (for now) #undef FCC
34654 * Adds the MII command for all 8560 ADS configurations
34655 * Updates config file to provide convenience commands for booting
34658 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
34659 Signed-off-by: Andy Fleming <afleming@freescale.com>
34661 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
34662 Author: Andy Fleming <afleming@freescale.com>
34663 Date: Tue May 8 17:23:02 2007 -0500
34665 Fix Marvell 88e1145 PHY init code
34667 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
34668 where the reset was being done after the errata code instead of
34671 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
34672 Signed-off-by: Andy Fleming <afleming@freescale.com>
34674 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
34675 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34676 Date: Wed Jul 11 14:52:16 2007 -0500
34678 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
34680 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34682 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
34683 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34684 Date: Wed Jul 11 14:52:08 2007 -0500
34686 pciauto setup bridge
34688 The P2P bridge bus numbers programmed into the device are relative to
34691 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34693 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
34694 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34695 Date: Wed Jul 11 14:52:01 2007 -0500
34697 Support PCIe extended config registers
34699 FSL PCIe block has extended cfg registers in the 100 and 400 range.
34700 For example, to read the LTSSM register: pci display <busn>.0 404 1
34702 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34704 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
34705 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34706 Date: Wed Jul 11 14:51:48 2007 -0500
34708 Minor improvements to drivers/pci_auto.c
34710 - Make pciauto_{pre,post}scan_setup_bridge non-static
34711 - Added physical address display in debug messages.
34713 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34715 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
34716 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34717 Date: Wed Jul 11 14:51:35 2007 -0500
34719 Start pci hose scan from hose->current_busno.
34721 Ensure hose->current_busno is not less than first_busno. This fixes
34722 broken board code which leaves current_busno=0 when first_busno is
34723 greater than 0 for the cases with multiple controllers.
34725 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34727 commit 3865b1fb7843a08ad49a6319a36415752276ff48
34728 Author: Stefan Roese <sr@denx.de>
34729 Date: Wed Jul 11 12:13:53 2007 +0200
34731 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
34733 Signed-off-by: Stefan Roese <sr@denx.de>
34735 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
34736 Author: Bartlomiej Sieka <tur@semihalf.com>
34737 Date: Wed Jul 11 20:11:07 2007 +0200
34739 CM1.QP1: Support for the Schindler CM1.QP1 board.
34741 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
34742 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34744 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
34745 Author: Heiko Schocher <hs@pollux.denx.de>
34746 Date: Wed Jul 11 18:39:11 2007 +0200
34748 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
34749 - now the Flash ST M29W040B is supported (not tested)
34750 - fix the "led" command
34751 - fix compile error, if BUILD_DIR is used
34753 Signed-off-by: Heiko Schocher <hs@denx.de>
34755 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
34756 Author: Stefan Roese <sr@denx.de>
34757 Date: Sun Jul 8 13:44:27 2007 +0200
34759 Fix malloc problem introduced with the relocation fixup for the PPC platform
34761 The relocation fixup didn't handle the malloc pointer initialization
34762 correctly. This patch fixes this problem. Tested successfully on 4xx.
34763 The relocation fixup patches for 4xx will follow soon.
34765 Signed-off-by: Stefan Roese <sr@denx.de>
34767 commit 0dca874db62718e41253659e60f3a1de7eb418ce
34768 Author: TsiChung <tcliew@Goku.(none)>
34769 Date: Tue Jul 10 15:45:43 2007 -0500
34771 Cache update and added CFG_UNIFY_CACHE
34773 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
34775 Signed-off-by: TsiChung <tcliew@Goku.(none)>
34777 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
34778 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34779 Date: Thu Jul 5 23:36:16 2007 -0500
34781 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
34783 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
34785 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34787 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
34788 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34789 Date: Thu Jul 5 23:31:25 2007 -0500
34791 Update header files
34793 Include immap.h and renamed mcfrtc.h to rtc.h
34795 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34797 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
34798 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34799 Date: Thu Jul 5 23:29:21 2007 -0500
34801 Add mcffec_initialize()
34803 Added mcffec_initialize() in eth_initialize()
34805 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34807 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
34808 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34809 Date: Thu Jul 5 23:27:40 2007 -0500
34811 Update header file and clean up
34815 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34817 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
34818 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34819 Date: Thu Jul 5 23:23:15 2007 -0500
34821 New uart structure and defines
34823 Seperated from mcfuart.h
34825 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34827 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
34828 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34829 Date: Thu Jul 5 23:22:31 2007 -0500
34831 New timer structure and defines
34833 Seperated from mcftimer.h
34835 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34837 commit e04acb2eba4782489417240eff76e20e176aec10
34838 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34839 Date: Thu Jul 5 23:21:09 2007 -0500
34841 Rename mcfrtc to rtc
34843 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
34845 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34847 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
34848 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34849 Date: Thu Jul 5 23:17:36 2007 -0500
34851 Rename mcfserial.c. Update include header
34853 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
34855 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34857 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
34858 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34859 Date: Thu Jul 5 23:13:58 2007 -0500
34861 Header file update, clean up and cache handling
34863 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
34865 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34867 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
34868 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34869 Date: Thu Jul 5 23:10:40 2007 -0500
34871 Create interrupts.c and modify Makefile
34873 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
34875 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34877 commit ddd104f1ed655eda50c06ba636237a83ed943f34
34878 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34879 Date: Thu Jul 5 23:06:55 2007 -0500
34883 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34885 commit b9bf3de377b2bae70c983c9b97feae914999e735
34886 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34887 Date: Thu Jul 5 23:05:31 2007 -0500
34889 Update header file and some clean up
34891 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
34893 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34895 commit 84a015b52ec820a5ae173717d78516de731c89c2
34896 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34897 Date: Thu Jul 5 23:03:28 2007 -0500
34899 Update header file and enable icache
34901 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
34903 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34905 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
34906 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34907 Date: Thu Jul 5 23:01:22 2007 -0500
34909 Update header file and removed interrupt_init()
34911 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
34913 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34915 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
34916 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34917 Date: Thu Jul 5 22:57:46 2007 -0500
34919 Update for flash.o and mii.o
34921 Removed flash.o and added mii.o
34923 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34925 commit c5ded275d839e4ff79f41718d50a835d989f57bc
34926 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34927 Date: Thu Jul 5 22:56:19 2007 -0500
34929 MII functions calls.
34931 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34933 commit 427c814104560e29bda14955c67703245aaaa5b4
34934 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34935 Date: Thu Jul 5 22:54:42 2007 -0500
34937 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
34939 The removed MII routines will be placed in mii.c.
34941 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34943 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
34944 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34945 Date: Thu Jul 5 22:51:05 2007 -0500
34949 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
34951 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34953 commit 2744354a8437b8f78db178e30660215688bff570
34954 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34955 Date: Thu Jul 5 22:46:38 2007 -0500
34957 Seperate old structure defines and new structure defines
34959 Removed new uart structure and defines to uart.h
34961 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34963 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
34964 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34965 Date: Thu Jul 5 22:45:01 2007 -0500
34967 Seperate old structure defines and new structure defines
34969 New timer structure and defines will move to new timer.h
34971 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34973 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
34974 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34975 Date: Thu Jul 5 22:42:23 2007 -0500
34981 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34983 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
34984 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34985 Date: Thu Jul 5 22:41:24 2007 -0500
34989 Replaced whitespace with tabs
34991 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34993 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
34994 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34995 Date: Thu Jul 5 22:39:07 2007 -0500
34997 Create new header file and move peripherals base address from configs file to new header file.
34999 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
35001 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
35003 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
35004 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
35005 Date: Thu Jul 5 22:24:58 2007 -0500
35009 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
35011 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
35013 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
35014 Author: Jon Loeliger <jdl@freescale.com>
35015 Date: Tue Jul 10 11:19:50 2007 -0500
35017 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
35019 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35020 Those always evaluated TRUE, and thus were always compiled
35021 even when IDE really wasn't defined/wanted.
35023 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35025 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
35026 Author: Jon Loeliger <jdl@freescale.com>
35027 Date: Tue Jul 10 11:13:21 2007 -0500
35029 drivers/: Remove lingering references to CFG_CMD_* symbols.
35031 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35032 Those always evaluated TRUE, and thus were always compiled
35033 even when IDE really wasn't defined/wanted.
35035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35037 commit f40a7f3e3888b42a43674b099e5470022c8c544c
35038 Author: Jon Loeliger <jdl@freescale.com>
35039 Date: Tue Jul 10 11:07:56 2007 -0500
35041 fs/: Remove lingering references to CFG_CMD_* symbols.
35043 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35044 Those always evaluated TRUE, and thus were always compiled
35045 even when IDE really wasn't defined/wanted.
35047 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35049 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
35050 Author: Jon Loeliger <jdl@freescale.com>
35051 Date: Tue Jul 10 11:05:02 2007 -0500
35053 net/: Remove lingering references to CFG_CMD_* symbols.
35055 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35056 Those always evaluated TRUE, and thus were always compiled
35057 even when IDE really wasn't defined/wanted.
35059 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35061 commit 902531788376046da212afd1661cffb62f3daa1c
35062 Author: Jon Loeliger <jdl@freescale.com>
35063 Date: Tue Jul 10 11:02:44 2007 -0500
35065 common/: Remove lingering references to CFG_CMD_* symbols.
35067 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35068 Those always evaluated TRUE, and thus were always compiled
35069 even when IDE really wasn't defined/wanted.
35071 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35073 commit d39b57415838c73fb0a37eca84de3c68ba990586
35074 Author: Jon Loeliger <jdl@freescale.com>
35075 Date: Tue Jul 10 10:48:22 2007 -0500
35077 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
35079 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35080 Those always evaluated TRUE, and thus were always compiled
35081 even when IDE really wasn't defined/wanted.
35083 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35085 commit 77a318545d57aefa844752465b94c7e09a3f26d0
35086 Author: Jon Loeliger <jdl@freescale.com>
35087 Date: Tue Jul 10 10:39:10 2007 -0500
35089 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
35091 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
35092 Those always evaluated TRUE, and thus were always compiled
35093 even when IDE really wasn't defined/wanted.
35095 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35097 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
35098 Author: Jon Loeliger <jdl@freescale.com>
35099 Date: Tue Jul 10 10:27:39 2007 -0500
35101 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
35103 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35105 commit 079a136c3588814784561d6e4856970ee82d6e2a
35106 Author: Jon Loeliger <jdl@freescale.com>
35107 Date: Tue Jul 10 10:12:10 2007 -0500
35109 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
35111 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
35112 used to be included but CONFIG_BOOTP_MASK was not defined.
35114 Remove lingering references to CFG_CMD_* symbols.
35116 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35118 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
35119 Author: Jon Loeliger <jdl@freescale.com>
35120 Date: Tue Jul 10 09:38:02 2007 -0500
35122 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
35124 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
35125 used to be included but CONFIG_BOOTP_MASK was not defined.
35127 Remove lingering references to CFG_CMD_* symbols.
35129 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35131 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
35132 Author: Jon Loeliger <jdl@freescale.com>
35133 Date: Tue Jul 10 09:29:01 2007 -0500
35135 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
35137 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
35138 used to be included but CONFIG_BOOTP_MASK was not defined.
35140 Remove lingering references to CFG_CMD_* symbols.
35142 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35144 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
35145 Author: Jon Loeliger <jdl@freescale.com>
35146 Date: Tue Jul 10 09:22:23 2007 -0500
35148 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
35150 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
35151 used to be included but CONFIG_BOOTP_MASK was not defined.
35153 Remove lingering references to CFG_CMD_* symbols.
35155 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35157 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
35158 Author: Jon Loeliger <jdl@freescale.com>
35159 Date: Tue Jul 10 09:10:49 2007 -0500
35161 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
35163 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
35164 used to be included but CONFIG_BOOTP_MASK was not defined.
35166 Remove lingering references to CFG_CMD_* symbols.
35168 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35170 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
35171 Author: Jon Loeliger <jdl@freescale.com>
35172 Date: Tue Jul 10 09:02:57 2007 -0500
35174 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
35176 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
35177 used to be included but CONFIG_BOOTP_MASK was not defined.
35179 Remove lingering references to CFG_CMD_* symbols.
35181 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35183 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
35184 Author: Jon Loeliger <jdl@freescale.com>
35185 Date: Mon Jul 9 22:08:34 2007 -0500
35187 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
35189 All of the choices for CONFIG_BOOTP_ are now documented in
35190 the README file. You must now individually select exactly
35191 the set that you want using a series of
35192 #define CONFIG_BOOTP_<x>
35193 statements in the board port config files now.
35195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35197 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
35198 Author: Jon Loeliger <jdl@freescale.com>
35199 Date: Mon Jul 9 21:57:31 2007 -0500
35201 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35203 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35205 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
35206 Author: Jon Loeliger <jdl@freescale.com>
35207 Date: Mon Jul 9 21:48:26 2007 -0500
35209 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35211 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35213 commit 37d4bb70586659dedef1658ce1bed071be098aec
35214 Author: Jon Loeliger <jdl@freescale.com>
35215 Date: Mon Jul 9 21:38:02 2007 -0500
35217 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35219 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35221 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
35222 Author: Jon Loeliger <jdl@freescale.com>
35223 Date: Mon Jul 9 21:31:24 2007 -0500
35225 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35227 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35229 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
35230 Author: Jon Loeliger <jdl@freescale.com>
35231 Date: Mon Jul 9 21:24:19 2007 -0500
35233 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35235 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35237 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
35238 Author: Jon Loeliger <jdl@freescale.com>
35239 Date: Mon Jul 9 21:16:53 2007 -0500
35241 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35243 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35245 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
35246 Author: Jon Loeliger <jdl@freescale.com>
35247 Date: Mon Jul 9 19:12:30 2007 -0500
35249 Retire CONFIG_COMMANDS finally.
35250 Strip old CFG_CMD_* symbols out.
35252 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35254 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
35255 Author: Jon Loeliger <jdl@freescale.com>
35256 Date: Mon Jul 9 19:10:03 2007 -0500
35258 Update README.* to reference new CONFIG_CMD_* names now.
35260 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35262 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
35263 Author: Jon Loeliger <jdl@freescale.com>
35264 Date: Mon Jul 9 19:06:00 2007 -0500
35266 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
35268 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35270 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
35271 Author: Jon Loeliger <jdl@freescale.com>
35272 Date: Mon Jul 9 18:57:22 2007 -0500
35274 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
35276 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35278 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
35279 Author: Jon Loeliger <jdl@freescale.com>
35280 Date: Mon Jul 9 18:45:16 2007 -0500
35282 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
35284 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35286 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
35287 Author: Jon Loeliger <jdl@freescale.com>
35288 Date: Mon Jul 9 18:38:39 2007 -0500
35290 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
35292 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35294 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
35295 Author: Jon Loeliger <jdl@freescale.com>
35296 Date: Mon Jul 9 18:31:28 2007 -0500
35298 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
35300 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35302 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
35303 Author: Jon Loeliger <jdl@freescale.com>
35304 Date: Mon Jul 9 18:24:55 2007 -0500
35306 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
35308 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35310 commit fcec2eb93e126400009729328e797f12bc94f1fd
35311 Author: Jon Loeliger <jdl@freescale.com>
35312 Date: Mon Jul 9 18:19:09 2007 -0500
35314 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
35316 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35318 commit a593814f2be0c9cdc3133cd550b167b8a988328f
35319 Author: Jon Loeliger <jdl@freescale.com>
35320 Date: Mon Jul 9 18:10:50 2007 -0500
35322 rtc/: Remove obsolete references to CONFIG_COMMANDS
35324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35326 commit 67350568f9d46e66c21829f3513b3db0caeb948b
35327 Author: Jon Loeliger <jdl@freescale.com>
35328 Date: Mon Jul 9 18:05:38 2007 -0500
35330 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
35332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35334 commit 7def6b34f910f08d7ef0a14646da067719237ca2
35335 Author: Jon Loeliger <jdl@freescale.com>
35336 Date: Mon Jul 9 18:02:11 2007 -0500
35338 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
35340 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35342 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
35343 Author: Jon Loeliger <jdl@freescale.com>
35344 Date: Mon Jul 9 17:56:50 2007 -0500
35346 fs/: Remove obsolete references to CONFIG_COMMANDS
35348 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35350 commit c91898bbc505aff3e12a807af88e76da18efb7ee
35351 Author: Jon Loeliger <jdl@freescale.com>
35352 Date: Mon Jul 9 17:46:09 2007 -0500
35354 tools/: Remove obsolete references to CONFIG_COMMANDS
35356 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35358 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
35359 Author: Jon Loeliger <jdl@freescale.com>
35360 Date: Mon Jul 9 17:45:14 2007 -0500
35362 net/: Remove obsolete references to CONFIG_COMMANDS
35364 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35366 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
35367 Author: Jon Loeliger <jdl@freescale.com>
35368 Date: Mon Jul 9 17:39:42 2007 -0500
35370 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
35372 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35374 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
35375 Author: Jon Loeliger <jdl@freescale.com>
35376 Date: Mon Jul 9 17:30:01 2007 -0500
35378 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
35380 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35382 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
35383 Author: Jon Loeliger <jdl@freescale.com>
35384 Date: Mon Jul 9 17:22:37 2007 -0500
35386 disk/: Remove obsolete references to CONFIG_COMMANDS
35388 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35390 commit 639221c76c88215bd55af83ad174fc30d1940f8f
35391 Author: Jon Loeliger <jdl@freescale.com>
35392 Date: Mon Jul 9 17:15:49 2007 -0500
35394 include/: Remove obsolete references to CONFIG_COMMANDS
35395 Mostly removed from comments here.
35397 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35399 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
35400 Author: Wolfgang Denk <wd@denx.de>
35401 Date: Tue Jul 10 00:01:28 2007 +0200
35403 Coding style cleanup; update CHANGELOG.
35405 Signed-off-by: Wolfgang Denk <wd@denx.de>
35407 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
35408 Author: Stefan Roese <sr@denx.de>
35409 Date: Mon Jul 9 11:00:24 2007 +0200
35411 Small coding style cleanup
35413 Signed-off-by: Stefan Roese <sr@denx.de>
35415 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
35416 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35417 Date: Mon Jul 9 10:10:08 2007 +0200
35419 Migrate esd 405EP boards to new NAND subsystem
35421 Remove unused CFG_NAND_LEGACY define
35423 These boards to not have NAND.
35425 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35427 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
35428 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35429 Date: Mon Jul 9 10:10:06 2007 +0200
35431 Migrate esd 405EP boards to new NAND subsystem
35433 Migrate esd 405EP boards to new NAND subsystem
35436 -use correct io accessors (in/out_be32())
35438 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35440 commit e09f7ab5749c345f924da272bea0521a73af5b11
35441 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35442 Date: Mon Jul 9 10:10:04 2007 +0200
35444 Migrate esd 405EP boards to new NAND subsystem
35446 This patch prepares the migration from the legacy NAND driver
35447 to U-Boot's new NAND subsystem for esd boards.
35449 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35451 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
35452 Author: Jon Loeliger <jdl@freescale.com>
35453 Date: Sun Jul 8 18:10:08 2007 -0500
35455 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
35457 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35459 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
35460 Author: Jon Loeliger <jdl@freescale.com>
35461 Date: Sun Jul 8 18:05:39 2007 -0500
35463 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
35465 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35467 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
35468 Author: Jon Loeliger <jdl@freescale.com>
35469 Date: Sun Jul 8 18:02:23 2007 -0500
35471 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
35473 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35475 commit baa26db4113679b80970ff447d91cc10217742a6
35476 Author: Jon Loeliger <jdl@freescale.com>
35477 Date: Sun Jul 8 17:51:39 2007 -0500
35479 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
35481 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35483 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
35484 Author: Jon Loeliger <jdl@freescale.com>
35485 Date: Sun Jul 8 17:02:01 2007 -0500
35487 Clear up confusion over the CMD_POST and POST_DIAG mess.
35489 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
35490 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
35491 Clear this mess up some.
35493 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35495 commit b3631487105a57ab7cbadfc26efbaf9676275018
35496 Author: Jon Loeliger <jdl@freescale.com>
35497 Date: Sun Jul 8 15:45:08 2007 -0500
35499 Remove references to the old cmd_confdefs.h include file.
35501 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35503 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
35504 Author: Jon Loeliger <jdl@freescale.com>
35505 Date: Sun Jul 8 15:42:59 2007 -0500
35507 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
35509 Use new CONFIG_CMD_* in lwmon5.h board config file.
35510 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
35512 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35514 commit a5562901661bd428f7e5feb333f796372cb81019
35515 Author: Jon Loeliger <jdl@freescale.com>
35516 Date: Sun Jul 8 15:31:57 2007 -0500
35518 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
35520 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35522 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
35523 Author: Jon Loeliger <jdl@freescale.com>
35524 Date: Sun Jul 8 15:02:44 2007 -0500
35526 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
35528 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35530 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
35531 Author: Jon Loeliger <jdl@freescale.com>
35532 Date: Sun Jul 8 15:12:40 2007 -0500
35534 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
35536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35538 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
35539 Author: Jon Loeliger <jdl@freescale.com>
35540 Date: Sun Jul 8 14:55:07 2007 -0500
35542 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
35544 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35546 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
35547 Author: Jon Loeliger <jdl@freescale.com>
35548 Date: Sun Jul 8 14:49:44 2007 -0500
35550 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
35552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35554 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
35555 Author: Jon Loeliger <jdl@freescale.com>
35556 Date: Sun Jul 8 14:21:43 2007 -0500
35558 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
35560 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35562 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
35563 Author: Jon Loeliger <jdl@freescale.com>
35564 Date: Sun Jul 8 14:14:17 2007 -0500
35566 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
35568 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35570 commit 348f258f24253433e4a2302a0bbceb6740a67246
35571 Author: Jon Loeliger <jdl@freescale.com>
35572 Date: Sun Jul 8 13:46:18 2007 -0500
35574 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
35576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35578 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
35579 Author: Jon Loeliger <jdl@freescale.com>
35580 Date: Sun Jul 8 10:09:35 2007 -0500
35582 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
35584 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35586 commit 60a0876b5106b34220e459c208bbf648073306c0
35587 Author: Jon Loeliger <jdl@freescale.com>
35588 Date: Sat Jul 7 21:04:26 2007 -0500
35590 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
35592 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35594 commit dcaa71562826a2466e894c868d132509dcda8444
35595 Author: Jon Loeliger <jdl@freescale.com>
35596 Date: Sat Jul 7 20:56:05 2007 -0500
35598 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
35600 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35602 commit 3c3227f3c737502311b25b72084573901cbbf17d
35603 Author: Jon Loeliger <jdl@freescale.com>
35604 Date: Sat Jul 7 20:40:43 2007 -0500
35606 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
35608 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35610 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
35611 Author: Jon Loeliger <jdl@freescale.com>
35612 Date: Thu Jul 5 19:52:35 2007 -0500
35614 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
35616 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35618 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
35619 Author: Jon Loeliger <jdl@freescale.com>
35620 Date: Thu Jul 5 19:32:07 2007 -0500
35622 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
35624 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35626 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
35627 Author: Jon Loeliger <jdl@freescale.com>
35628 Date: Thu Jul 5 19:13:52 2007 -0500
35630 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
35632 Since ADS860.h includes "board/fads/fads.h" with ramifications
35633 on the CONFIG_COMMAND treatment, it too has to be adjusted to
35634 exclude already configured commands in this same commit.
35636 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35638 commit 10e038932f22ee80ebd53de312531e70e6590a2f
35639 Author: Thomas Knobloch <knobloch@siemens.com>
35640 Date: Fri Jul 6 14:58:39 2007 +0200
35642 [NAND] Bad block skipping for command nboot
35644 The old implementation of command nboot does not support reading the image from
35645 NAND flash with skipping of bad blocks. The patch implements a new version of
35646 the nboot command: by calling nboot.jffs2 from the u-boot command line the
35647 command will load the image from NAND flash with respect to bad blocks (by using
35648 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
35651 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
35652 Signed-off-by: Stefan Roese <sr@denx.de>
35654 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
35655 Author: Stefan Roese <sr@denx.de>
35656 Date: Fri Jul 6 12:26:51 2007 +0200
35658 ppc4xx: Update lwmon5 default environment
35660 Signed-off-by: Stefan Roese <sr@denx.de>
35662 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
35663 Author: Stefan Roese <sr@denx.de>
35664 Date: Fri Jul 6 11:48:24 2007 +0200
35666 ppc4xx: Update lwmon5 board
35668 Add unlock=yes environment variable to default variables to unlock
35669 the CFI flash by default.
35671 Signed-off-by: Stefan Roese <sr@denx.de>
35673 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
35674 Author: Stefan Roese <sr@denx.de>
35675 Date: Fri Jul 6 09:45:47 2007 +0200
35677 Fix problem with get/setdcr commands introduced by cfg patches
35679 Signed-off-by: Stefan Roese <sr@denx.de>
35681 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
35682 Author: Wolfgang Denk <wd@denx.de>
35683 Date: Fri Jul 6 02:50:19 2007 +0200
35685 Code cleanup and default config update for STC GP3 SSA board.
35687 Signed-off-by: Wolfgang Denk <wd@denx.de>
35689 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
35690 Author: Wolfgang Denk <wd@denx.de>
35691 Date: Thu Jul 5 17:56:27 2007 +0200
35693 Fixing some typos etc. introduced mainly by cfg patches.
35695 Signed-off-by: Wolfgang Denk <wd@denx.de>
35697 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
35698 Author: Wolfgang Denk <wd@denx.de>
35699 Date: Thu Jul 5 11:12:16 2007 +0200
35701 Minor coding style cleanup. Update CHANGELOG.
35703 commit dca3b3d6d6396b67e5e84af53452164923c73443
35704 Author: Jon Loeliger <jdl@jdl.com>
35705 Date: Wed Jul 4 22:33:46 2007 -0500
35707 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
35709 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35711 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
35712 Author: Jon Loeliger <jdl@jdl.com>
35713 Date: Wed Jul 4 22:33:38 2007 -0500
35715 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
35717 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35719 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
35720 Author: Jon Loeliger <jdl@jdl.com>
35721 Date: Wed Jul 4 22:33:30 2007 -0500
35723 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
35725 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35727 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
35728 Author: Jon Loeliger <jdl@jdl.com>
35729 Date: Wed Jul 4 22:33:23 2007 -0500
35731 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
35733 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35735 commit 26a34560d56a9df5bc2ae23525d9229736134757
35736 Author: Jon Loeliger <jdl@jdl.com>
35737 Date: Wed Jul 4 22:33:17 2007 -0500
35739 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
35741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35743 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
35744 Author: Jon Loeliger <jdl@jdl.com>
35745 Date: Wed Jul 4 22:33:13 2007 -0500
35747 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
35749 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35751 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
35752 Author: Jon Loeliger <jdl@jdl.com>
35753 Date: Wed Jul 4 22:33:07 2007 -0500
35755 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
35757 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35759 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
35760 Author: Jon Loeliger <jdl@jdl.com>
35761 Date: Wed Jul 4 22:33:01 2007 -0500
35763 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
35765 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35767 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
35768 Author: Jon Loeliger <jdl@jdl.com>
35769 Date: Wed Jul 4 22:32:57 2007 -0500
35771 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
35773 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35775 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
35776 Author: Jon Loeliger <jdl@jdl.com>
35777 Date: Wed Jul 4 22:32:51 2007 -0500
35779 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
35781 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35783 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
35784 Author: Jon Loeliger <jdl@jdl.com>
35785 Date: Wed Jul 4 22:32:32 2007 -0500
35787 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
35789 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35791 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
35792 Author: Jon Loeliger <jdl@jdl.com>
35793 Date: Wed Jul 4 22:32:25 2007 -0500
35795 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
35797 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35799 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
35800 Author: Jon Loeliger <jdl@jdl.com>
35801 Date: Wed Jul 4 22:32:19 2007 -0500
35803 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
35805 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35807 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
35808 Author: Jon Loeliger <jdl@jdl.com>
35809 Date: Wed Jul 4 22:32:10 2007 -0500
35811 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
35813 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35815 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
35816 Author: Jon Loeliger <jdl@jdl.com>
35817 Date: Wed Jul 4 22:32:03 2007 -0500
35819 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
35821 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35823 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
35824 Author: Jon Loeliger <jdl@jdl.com>
35825 Date: Wed Jul 4 22:31:56 2007 -0500
35827 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
35829 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35831 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
35832 Author: Jon Loeliger <jdl@jdl.com>
35833 Date: Wed Jul 4 22:31:49 2007 -0500
35835 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
35837 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35839 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
35840 Author: Jon Loeliger <jdl@jdl.com>
35841 Date: Wed Jul 4 22:31:42 2007 -0500
35843 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
35845 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35847 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
35848 Author: Jon Loeliger <jdl@jdl.com>
35849 Date: Wed Jul 4 22:31:35 2007 -0500
35851 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
35853 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35855 commit d794cfefead5fc177cf4f41164e80382e9c9484a
35856 Author: Jon Loeliger <jdl@jdl.com>
35857 Date: Wed Jul 4 22:31:15 2007 -0500
35859 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
35861 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35863 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
35864 Author: Jon Loeliger <jdl@jdl.com>
35865 Date: Wed Jul 4 22:31:07 2007 -0500
35867 include/configs: Use new CONFIG_CMD_* in STx board config files.
35869 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35871 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
35872 Author: Jon Loeliger <jdl@jdl.com>
35873 Date: Wed Jul 4 22:30:58 2007 -0500
35875 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
35877 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35879 commit 2694690e285acaa34922f55f4b5ae030da60c55a
35880 Author: Jon Loeliger <jdl@jdl.com>
35881 Date: Wed Jul 4 22:30:50 2007 -0500
35883 include/configs: Use new CONFIG_CMD_* in TQM board config files.
35885 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35887 commit 1cc4c458329765b58e584a19821e796b3c10e976
35888 Author: Jon Loeliger <jdl@jdl.com>
35889 Date: Wed Jul 4 22:30:28 2007 -0500
35891 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
35893 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35895 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
35896 Author: Jon Loeliger <jdl@jdl.com>
35897 Date: Wed Jul 4 22:30:06 2007 -0500
35899 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
35901 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35903 commit b44896215a09c60fa40cae906f7ed207bbc2c492
35904 Author: Sergei Poselenov <sposelenov@emcraft.com>
35905 Date: Thu Jul 5 08:17:37 2007 +0200
35907 Merged POST framework with the current TOT.
35909 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
35911 commit b24629fa377214d63bb40d1360e354b6d3e4af56
35912 Author: Jon Loeliger <jdl@jdl.com>
35913 Date: Wed Jun 13 13:23:15 2007 -0500
35915 mpc86xx: Remove old CFG_CMD_* references.
35917 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35919 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
35920 Author: Jon Loeliger <jdl@jdl.com>
35921 Date: Wed Jun 13 13:22:54 2007 -0500
35923 Add MPC8568MDS to MAKEALL 85xx target.
35925 It was missing from the original port submission.
35927 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35929 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
35930 Author: Jon Loeliger <jdl@jdl.com>
35931 Date: Wed Jun 13 13:22:08 2007 -0500
35933 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
35935 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35937 commit 56b304ac2091689506088a9ae67f63fd6300cf16
35938 Author: Jon Loeliger <jdl@jdl.com>
35939 Date: Wed Jun 13 13:21:37 2007 -0500
35941 Fix #if typo in CONFIG_CMD_* changes.
35943 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35945 commit f780b83316d9af1f61d71cc88b1917b387b9b995
35946 Author: Niklaus Giger <niklausgiger@gmx.ch>
35947 Date: Wed Jun 27 18:11:38 2007 +0200
35949 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
35951 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
35953 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
35954 Author: Stefan Roese <sr@denx.de>
35955 Date: Wed Jul 4 10:06:30 2007 +0200
35957 ppc4xx: Update lwmon5 board
35959 - Add optional ECC generation routine to preserve existing
35960 RAM values. This is needed for the Linux log-buffer support
35961 - Add optional DDR2 setup with CL=4
35962 - GPIO50 not used anymore
35963 - Lime register setup added
35965 Signed-off-by: Stefan Roese <sr@denx.de>
35967 commit 6810a34677dbc446334f5e451f1682426dd33b49
35968 Author: Grant Likely <grant.likely@secretlab.ca>
35969 Date: Tue Jul 3 00:17:28 2007 -0600
35971 Fix Makefile to use $(MKCONFIG) macro for all board ports
35973 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35975 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
35976 Author: Grant Likely <grant.likely@secretlab.ca>
35977 Date: Tue Jul 3 00:17:28 2007 -0600
35979 Fix Makefile to use $(MKCONFIG) macro for all board ports
35981 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35983 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
35984 Author: Grant Likely <grant.likely@secretlab.ca>
35985 Date: Tue Jul 3 00:34:49 2007 -0600
35987 Correct fixup relocation for mpc83xx
35989 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35991 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
35992 Author: Grant Likely <grant.likely@secretlab.ca>
35993 Date: Tue Jul 3 00:34:44 2007 -0600
35995 Correct fixup relocation for mpc8260
35997 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35999 commit f3a52fe05923935db86985daf9438e2f70ac39aa
36000 Author: Grant Likely <grant.likely@secretlab.ca>
36001 Date: Tue Jul 3 00:34:39 2007 -0600
36003 Correct fixup relocation for mpc824x
36005 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36007 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
36008 Author: Grant Likely <grant.likely@secretlab.ca>
36009 Date: Tue Jul 3 00:34:34 2007 -0600
36011 Correct fixup relocation for mpc8220
36013 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36015 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
36016 Author: Grant Likely <grant.likely@secretlab.ca>
36017 Date: Tue Jul 3 00:34:29 2007 -0600
36019 Correct fixup relocation for MPC5xxx
36021 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36023 commit 3649cd99ba815b6601868735765602f00ef3692b
36024 Author: Grant Likely <grant.likely@secretlab.ca>
36025 Date: Tue Jul 3 00:34:24 2007 -0600
36027 Correct relocation fixup for mpc5xx
36029 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36031 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
36032 Author: Grant Likely <grant.likely@secretlab.ca>
36033 Date: Tue Jul 3 00:34:19 2007 -0600
36035 Don't set gd->reloc_off if relocation of .fixup works correctly
36037 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36039 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
36040 Author: Grant Likely <grant.likely@secretlab.ca>
36041 Date: Tue Jul 3 00:34:14 2007 -0600
36043 Remove obsolete mpc83xx linker scripts
36045 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36047 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
36048 Author: Grant Likely <grant.likely@secretlab.ca>
36049 Date: Tue Jul 3 00:34:09 2007 -0600
36051 Consolidate mpc8260 linker scripts
36053 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36055 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
36056 Author: Grant Likely <grant.likely@secretlab.ca>
36057 Date: Tue Jul 3 00:34:04 2007 -0600
36059 Remove obsolete mpc824x linker scripts
36061 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36063 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
36064 Author: Grant Likely <grant.likely@secretlab.ca>
36065 Date: Tue Jul 3 00:33:59 2007 -0600
36067 Remove obsolete mpc824x linker scripts (3 of 4)
36069 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36071 commit a71c084f3ac7fedf144537db2b2da47323068833
36072 Author: Grant Likely <grant.likely@secretlab.ca>
36073 Date: Tue Jul 3 00:33:53 2007 -0600
36075 Remove obsolete mpc824x linker scripts (2 of 4)
36077 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36079 commit f670a15468d1365241d40022b9408e1004181f5e
36080 Author: Grant Likely <grant.likely@secretlab.ca>
36081 Date: Tue Jul 3 00:33:48 2007 -0600
36083 Remove obsolete mpc824x linker scripts (1 of 4)
36085 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36087 commit 09555bd45a04c0e54f172528d21bc18896550d28
36088 Author: Grant Likely <grant.likely@secretlab.ca>
36089 Date: Tue Jul 3 00:33:43 2007 -0600
36091 Remove obsolete mpc8220 linker scripts
36093 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36095 commit 5efb992f046e51225c93d52f80fecbe433abd789
36096 Author: Grant Likely <grant.likely@secretlab.ca>
36097 Date: Tue Jul 3 00:33:38 2007 -0600
36099 Remove obsolete mpc5xxx linker scripts (3 of 3)
36101 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36103 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
36104 Author: Grant Likely <grant.likely@secretlab.ca>
36105 Date: Tue Jul 3 00:33:33 2007 -0600
36107 Remove obsolete mpc5xxx linker scripts (2 of 3)
36109 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36111 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
36112 Author: Grant Likely <grant.likely@secretlab.ca>
36113 Date: Tue Jul 3 00:33:28 2007 -0600
36115 Remove obsolete mpc5xxx linker scripts (1 of 3)
36117 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36119 commit b7d8e05f8675249b5f208aa73babeed384a4519d
36120 Author: Grant Likely <grant.likely@secretlab.ca>
36121 Date: Tue Jul 3 00:33:23 2007 -0600
36123 Remove obsolete mpc5xx linker scripts
36125 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36127 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
36128 Author: Grant Likely <grant.likely@secretlab.ca>
36129 Date: Tue Jul 3 00:33:18 2007 -0600
36131 Consolidate mpc83xx linker scripts
36133 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36135 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
36136 Author: Grant Likely <grant.likely@secretlab.ca>
36137 Date: Tue Jul 3 00:33:13 2007 -0600
36139 Consolidate mpc8260 linker scripts
36141 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36143 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
36144 Author: Grant Likely <grant.likely@secretlab.ca>
36145 Date: Tue Jul 3 00:33:08 2007 -0600
36147 Consolidate mpc824x linker scripts
36149 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36151 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
36152 Author: Grant Likely <grant.likely@secretlab.ca>
36153 Date: Tue Jul 3 00:33:03 2007 -0600
36155 Consolidate mpc8220 linker scripts
36157 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36159 commit d181c9a15cd41863fe24840d17848429f27d3c8c
36160 Author: Grant Likely <grant.likely@secretlab.ca>
36161 Date: Tue Jul 3 00:32:58 2007 -0600
36163 Consolidate mpc5xxx linker scripts
36165 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36167 commit 287ac924adb7291bebe5086652a362a30ab28b13
36168 Author: Grant Likely <grant.likely@secretlab.ca>
36169 Date: Tue Jul 3 00:32:53 2007 -0600
36171 Consolidate mpc5xx linker scripts
36173 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36175 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
36176 Author: Wolfgang Denk <wd@denx.de>
36177 Date: Wed Jul 4 00:43:53 2007 +0200
36179 Fix a few file permission problems.
36181 Signed-off-by: Wolfgang Denk <wd@denx.de>
36183 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
36184 Author: Wolfgang Denk <wd@denx.de>
36185 Date: Wed Jul 4 00:38:38 2007 +0200
36187 Minor coding style cleanup. Rebuild CHANGELOG file.
36189 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
36190 Author: Jon Loeliger <jdl@jdl.com>
36191 Date: Mon Jun 11 19:03:44 2007 -0500
36193 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
36195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36197 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
36198 Author: Jon Loeliger <jdl@jdl.com>
36199 Date: Mon Jun 11 19:03:39 2007 -0500
36201 README: Rewrite command line config to use CONFIG_CMD_* names.
36203 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36205 commit 72a074cec68e5bad60d63206c050974e08afd804
36206 Author: Jon Loeliger <jdl@jdl.com>
36207 Date: Mon Jun 11 19:03:34 2007 -0500
36209 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36211 This is a compatibility step that allows both the older form
36212 and the new form to co-exist for a while until the older can
36213 be removed entirely.
36215 All transformations are of the form:
36217 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36219 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36221 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36223 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
36224 Author: Jon Loeliger <jdl@jdl.com>
36225 Date: Mon Jun 11 19:03:28 2007 -0500
36227 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36229 This is a compatibility step that allows both the older form
36230 and the new form to co-exist for a while until the older can
36231 be removed entirely.
36233 All transformations are of the form:
36235 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36237 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36239 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36241 commit 9107ebe0d352420895ab69b715697bdebc8caf50
36242 Author: Jon Loeliger <jdl@jdl.com>
36243 Date: Mon Jun 11 19:03:23 2007 -0500
36245 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36247 This is a compatibility step that allows both the older form
36248 and the new form to co-exist for a while until the older can
36249 be removed entirely.
36251 All transformations are of the form:
36253 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36255 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36257 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36259 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
36260 Author: Jon Loeliger <jdl@jdl.com>
36261 Date: Mon Jun 11 19:03:19 2007 -0500
36263 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36265 This is a compatibility step that allows both the older form
36266 and the new form to co-exist for a while until the older can
36267 be removed entirely.
36269 All transformations are of the form:
36271 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36273 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36275 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36277 commit 737184114ec9c9e0ab94d6713536126073bd2472
36278 Author: Jon Loeliger <jdl@jdl.com>
36279 Date: Mon Jun 11 19:03:15 2007 -0500
36281 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36283 This is a compatibility step that allows both the older form
36284 and the new form to co-exist for a while until the older can
36285 be removed entirely.
36287 All transformations are of the form:
36289 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36291 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36293 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36295 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
36296 Author: Jon Loeliger <jdl@jdl.com>
36297 Date: Mon Jun 11 19:03:08 2007 -0500
36299 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36301 This is a compatibility step that allows both the older form
36302 and the new form to co-exist for a while until the older can
36303 be removed entirely.
36305 All transformations are of the form:
36307 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36309 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36311 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36313 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
36314 Author: Jon Loeliger <jdl@jdl.com>
36315 Date: Mon Jun 11 19:03:03 2007 -0500
36317 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36319 This is a compatibility step that allows both the older form
36320 and the new form to co-exist for a while until the older can
36321 be removed entirely.
36323 All transformations are of the form:
36325 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36327 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36329 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36331 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
36332 Author: Jon Loeliger <jdl@jdl.com>
36333 Date: Mon Jun 11 19:02:58 2007 -0500
36335 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36337 This is a compatibility step that allows both the older form
36338 and the new form to co-exist for a while until the older can
36339 be removed entirely.
36341 All transformations are of the form:
36343 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36345 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36347 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36349 commit 98b79003c21c2578206003256de4e781d6b36ca8
36350 Author: Jon Loeliger <jdl@jdl.com>
36351 Date: Mon Jun 11 19:02:53 2007 -0500
36353 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36355 This is a compatibility step that allows both the older form
36356 and the new form to co-exist for a while until the older can
36357 be removed entirely.
36359 All transformations are of the form:
36361 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36363 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36365 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36367 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
36368 Author: Jon Loeliger <jdl@jdl.com>
36369 Date: Mon Jun 11 19:02:49 2007 -0500
36371 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36373 This is a compatibility step that allows both the older form
36374 and the new form to co-exist for a while until the older can
36375 be removed entirely.
36377 All transformations are of the form:
36379 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36381 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36383 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36385 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
36386 Author: Jon Loeliger <jdl@jdl.com>
36387 Date: Mon Jun 11 19:02:34 2007 -0500
36389 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36391 This is a compatibility step that allows both the older form
36392 and the new form to co-exist for a while until the older can
36393 be removed entirely.
36395 All transformations are of the form:
36397 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36399 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36401 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36403 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
36404 Author: Jon Loeliger <jdl@jdl.com>
36405 Date: Mon Jun 11 19:02:20 2007 -0500
36407 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36409 This is a compatibility step that allows both the older form
36410 and the new form to co-exist for a while until the older can
36411 be removed entirely.
36413 All transformations are of the form:
36415 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36417 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36421 commit d5be43de93ff905c465e509d45a3164ef48d26e7
36422 Author: Jon Loeliger <jdl@jdl.com>
36423 Date: Mon Jun 11 19:02:10 2007 -0500
36425 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36427 This is a compatibility step that allows both the older form
36428 and the new form to co-exist for a while until the older can
36429 be removed entirely.
36431 All transformations are of the form:
36433 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36435 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36437 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36439 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
36440 Author: Jon Loeliger <jdl@jdl.com>
36441 Date: Mon Jun 11 19:02:05 2007 -0500
36443 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36445 This is a compatibility step that allows both the older form
36446 and the new form to co-exist for a while until the older can
36447 be removed entirely.
36449 All transformations are of the form:
36451 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36453 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36455 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36457 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
36458 Author: Jon Loeliger <jdl@jdl.com>
36459 Date: Mon Jun 11 19:01:54 2007 -0500
36461 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36463 This is a compatibility step that allows both the older form
36464 and the new form to co-exist for a while until the older can
36465 be removed entirely.
36467 All transformations are of the form:
36469 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36471 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36473 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36475 commit a76adc8142c1d956385a109e0b70f9319ede4d66
36476 Author: Jon Loeliger <jdl@jdl.com>
36477 Date: Mon Jun 11 19:01:43 2007 -0500
36479 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36481 This is a compatibility step that allows both the older form
36482 and the new form to co-exist for a while until the older can
36483 be removed entirely.
36485 All transformations are of the form:
36487 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36489 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36491 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36493 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
36494 Author: Jon Loeliger <jdl@jdl.com>
36495 Date: Mon Jun 11 19:01:34 2007 -0500
36497 Introduce initial versions of new Command Config files.
36499 Derive three new files from cmd_confdefs.h:
36500 config_bootp.h - Has BOOTP related config options, not commands
36501 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
36502 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
36504 For now, include "config_bootp.h" for compatability until all
36505 users of it directly include it properly.
36507 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36509 commit 1f2a05898658900dc5717761e27abf2052e67e13
36510 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
36511 Date: Sat Jun 30 18:50:48 2007 +0200
36515 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
36517 commit a5d71e290f3673269be8eefb4ec44f53412f9461
36518 Author: Heiko Schocher <hs@pollux.denx.de>
36519 Date: Mon Jun 25 19:11:37 2007 +0200
36521 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
36523 Signed-off-by: Heiko Schocher <hs@denx.de>
36525 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
36526 Author: Niklaus Giger <niklaus.giger@nestal.com>
36527 Date: Mon Jun 25 17:03:13 2007 +0200
36529 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
36531 This patch prints the DDR status registers upon machine check
36532 interrupt on the 440EPx/GRx. This can be useful especially when
36533 ECC support is enabled.
36535 I added some small changes to the original patch from Niklaus to
36536 make it compile clean.
36538 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
36539 Signed-off-by: Stefan Roese <sr@denx.de>
36541 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
36542 Author: Niklaus Giger <niklaus.giger@nestal.com>
36543 Date: Mon Jun 25 16:50:55 2007 +0200
36545 ppc4xx: Fix O=buildir builds
36547 This patch fixes the problem to assemble cpu/ppc4xx/start.S
36548 experienced last week where building failed having specified
36549 O=../build.sequoia.
36551 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
36553 commit 466fff1a7bb5fe764a06450626f6098219f446b8
36554 Author: Stefan Roese <sr@denx.de>
36555 Date: Mon Jun 25 15:57:39 2007 +0200
36557 ppc4xx: Add pci_pre_init() for 405 boards
36559 This patch removes the CFG_PCI_PRE_INIT option completely, since
36560 it's not needed anymore with the patch from Matthias Fuchs with
36561 the "weak" pci_pre_init() implementation.
36563 Signed-off-by: Stefan Roese <sr@denx.de>
36565 commit 6f35c53166213c24a5a0e2390ed861136ff73870
36566 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36567 Date: Sun Jun 24 17:41:21 2007 +0200
36569 ppc4xx: Maintenance patch for esd's CPCI405 derivats
36571 -add pci_pre_init() for pci interrupt fixup code
36572 -disable phy sleep mode via reset_phy() function
36573 -use correct io accessors
36576 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36578 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
36579 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36580 Date: Sun Jun 24 17:23:41 2007 +0200
36582 ppc4xx: Add pci_pre_init() for 405 boards
36584 This patch adds support for calling a plattform dependant
36585 pci_pre_init() function for 405 boards. This can be used to
36586 move the current pci_405gp_fixup_irq() function into the
36589 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
36590 A default function with 'weak' attribute is used when
36591 a board specific pci_pre_init() is not implemented.
36593 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36595 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
36596 Author: Wolfgang Denk <wd@denx.de>
36597 Date: Fri Jun 22 23:59:00 2007 +0200
36599 Coding stylke cleanup; rebuild CHANGELOG
36601 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
36602 Author: Igor Lisitsin <igor@emcraft.com>
36603 Date: Wed Apr 18 14:55:19 2007 +0400
36605 Adapt log buffer code to support Linux 2.6
36607 A new environment variable, "logversion", selects the log buffer
36608 behaviour. If it is not set or set to a value other than 2, then the
36609 old, Linux 2.4.4, behaviour is selected.
36611 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
36614 commit a11e06965ec91270c51853407ff1261d3c740386
36615 Author: Igor Lisitsin <igor@emcraft.com>
36616 Date: Wed Mar 28 19:06:19 2007 +0400
36618 Extend POST support for PPC440
36620 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
36622 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
36625 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
36626 Author: Heiko Schocher <hs@pollux.denx.de>
36627 Date: Fri Jun 22 19:11:54 2007 +0200
36629 [PCS440EP] upgrade the PCS440EP board:
36630 - Show on the Status LEDs, some States of the board.
36631 - Get the MAC addresses from the EEProm
36633 - use the CF on the board.
36634 - check the U-Boot image in the Flash with a SHA1
36636 - use dynamic TLB entries generation for the SDRAM
36638 Signed-off-by: Heiko Schocher <hs@denx.de>
36640 commit 3a1f5c81b0b9557817a789bece839905581c2205
36641 Author: Stefan Roese <sr@denx.de>
36642 Date: Fri Jun 22 16:58:40 2007 +0200
36644 ppc4xx: Fix problem with extended program_tlb() funtion
36646 The recently extended program_tlb() function had a problem when
36647 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
36648 virtual address was not incremented. This patch fixes this issue
36649 and is tested on Katmai with 512MB SDRAM.
36651 Signed-off-by: Stefan Roese <sr@denx.de>
36653 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
36654 Author: Rafal Jaworowski <raj@semihalf.com>
36655 Date: Fri Jun 22 14:58:04 2007 +0200
36657 [ppc] Fix build breakage for all non-4xx PowerPC variants.
36659 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
36660 - minor 4xx cleanup
36662 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
36663 Author: Mike Frysinger <vapier@gentoo.org>
36664 Date: Fri Jun 22 10:34:12 2007 +0200
36666 [patch] add nand_init() prototype to nand.h
36668 since nand_init() is expected to be called by other parts of u-boot, there
36669 should be a prototype for it in nand.h
36671 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36672 Signed-off-by: Stefan Roese <sr@denx.de>
36674 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
36675 Author: Wolfgang Denk <wd@denx.de>
36676 Date: Wed Jun 20 18:14:24 2007 +0200
36678 Coding style cleanup. Refresh CHANGELOG.
36680 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
36681 Author: Stefan Roese <sr@denx.de>
36682 Date: Tue Jun 19 17:22:44 2007 +0200
36684 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
36686 This patch adds a board command to configure the I2C bootstrap EEPROM
36687 values. Right now 533 and 667MHz are supported for booting either via NOR
36688 or NAND FLASH. Here the usage:
36690 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
36691 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
36693 Signed-off-by: Stefan Roese <sr@denx.de>
36695 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
36696 Author: Stefan Roese <sr@denx.de>
36697 Date: Tue Jun 19 16:42:31 2007 +0200
36699 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
36701 The latest changes showed a problem with the location of the NAND-SPL
36702 image in the OCM and the init-data area (incl. cache). This patch
36703 fixes this problem.
36705 Signed-off-by: Stefan Roese <sr@denx.de>
36707 commit 86ba99e34194394052d24c04dc40d1263d29a26f
36708 Author: Stefan Roese <sr@denx.de>
36709 Date: Tue Jun 19 16:40:58 2007 +0200
36711 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
36713 Signed-off-by: Stefan Roese <sr@denx.de>
36715 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
36716 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
36717 Date: Mon Jun 18 13:50:13 2007 -0500
36719 Added M5329AFEE and M5329BFEE Platforms
36721 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
36722 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
36723 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
36726 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
36727 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
36728 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
36729 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
36730 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
36731 lib_m68k/time.c, net/eth.c and rtc/Makefile
36733 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
36735 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
36736 Author: Michal Simek <monstr@monstr.eu>
36737 Date: Sun Jun 17 19:04:11 2007 +0200
36739 [fix] email reparation
36741 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
36742 Author: Michal Simek <monstr@monstr.eu>
36743 Date: Sun Jun 17 19:03:21 2007 +0200
36745 [FIX] fix microblaze file permitission
36747 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
36748 Author: Stefan Roese <sr@denx.de>
36749 Date: Fri Jun 15 11:33:41 2007 +0200
36751 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
36753 Now CONFIG_440 has to be defined in all PPC440 board config files.
36755 Signed-off-by: Stefan Roese <sr@denx.de>
36757 commit efa35cf12d914d4caba942acd5a6c45f217de302
36758 Author: Grzegorz Bernacki <gjb@semihalf.com>
36759 Date: Fri Jun 15 11:19:28 2007 +0200
36761 ppc4xx: Clean up 440 exceptions handling
36763 - Introduced dedicated switches for building 440 and 405 images required
36764 for 440-specific machine instructions like 'rfmci' etc.
36766 - Exception vectors moved to the proper location (_start moved away from
36767 the critical exception handler space, which it occupied)
36769 - CriticalInput now serviced (with default handler)
36771 - MachineCheck properly serviced (added a dedicated handler and return
36774 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
36775 unhandled and those not relevant for 4xx were eliminated)
36777 - Eliminated Linux leftovers, removed dead code
36779 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36780 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
36781 Signed-off-by: Stefan Roese <sr@denx.de>
36783 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
36784 Author: Stefan Roese <sr@denx.de>
36785 Date: Fri Jun 15 08:18:01 2007 +0200
36787 [ppc4xx] Add initial lwmon5 board support
36789 This patch adds initial support for the Liebherr lwmon5 board euqipped
36790 with an AMCC 440EPx PowerPC.
36792 Signed-off-by: Stefan Roese <sr@denx.de>
36794 commit 85f737376d5ff3d5f0d45a8b657686326d175307
36795 Author: Stefan Roese <sr@denx.de>
36796 Date: Fri Jun 15 07:39:43 2007 +0200
36798 [ppc4xx] Extend 44x GPIO setup with default output state
36800 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
36801 is extended with the default GPIO output state (level).
36803 Signed-off-by: Stefan Roese <sr@denx.de>
36805 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
36806 Author: Stefan Roese <sr@denx.de>
36807 Date: Thu Jun 14 11:14:32 2007 +0200
36809 [ppc4xx] Extend program_tlb() with virtual & physical addresses
36811 Now program_tlb() allows to program a TLB (or multiple) with
36812 different virtual and physical addresses. With this change, now one
36813 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
36814 diabled and once with caches enabled.
36816 Signed-off-by: Stefan Roese <sr@denx.de>
36818 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
36819 Author: Detlev Zundel <dzu@denx.de>
36820 Date: Wed May 23 19:02:41 2007 +0200
36822 Change 'repeatable' attribute of some commands to sensible values.
36824 Most prominently this changes 'erase' to be non-repeatable.
36826 Signed-off-by: Detlev Zundel <dzu@denx.de>
36828 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
36829 Author: Detlev Zundel <dzu@denx.de>
36830 Date: Wed May 23 18:47:48 2007 +0200
36832 Fix 'run' not to continue after interrupted command
36834 Signed-off-by: Detlev Zundel <dzu@denx.de>
36836 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
36837 Author: Jason Jin <Jason.jin@freescale.com>
36838 Date: Mon Jun 11 15:14:24 2007 +0200
36840 USB: This patch fix readl in ohci swap reg access.
36842 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
36844 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
36845 Author: Bartlomiej Sieka <tur@semihalf.com>
36846 Date: Fri Jun 8 14:52:22 2007 +0200
36848 TQM5200: Add Flat Device Tree support, update default env. accordingly.
36850 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
36851 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
36853 commit 9045f33c023f698660a2e45d1b2194c0711abebc
36854 Author: Wolfgang Denk <wd@denx.de>
36855 Date: Fri Jun 8 10:24:58 2007 +0200
36857 Fix config problems on SC3 board; make ide_reset_timeout work.
36859 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
36860 Author: Benoît Monin <bmonin@adeneo.eu>
36861 Date: Fri Jun 8 09:55:24 2007 +0200
36863 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
36865 Set the correct value in GPIOx_TCR when configuring the gpio
36866 with CFG_440_GPIO_TABLE.
36868 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
36869 Signed-off-by: Stefan Roese <sr@denx.de>
36871 commit f539edc076cfe52bff919dd512ba8d7af0e22092
36872 Author: Vadim Bendebury <vbendeb@google.com>
36873 Date: Thu May 24 15:52:25 2007 -0700
36875 cosmetic changes to bcm570x driver
36877 This is a cosmetic only changes submission.
36878 It affects files relevant to bcm570x driver.
36879 the commands used to generate this change was
36882 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
36884 The BMW target (the only one using this chip so far) builds cleanly, the
36885 `before and after' generated object files for drivers/bcm570x.c and
36886 drivers/tigon3.o are identical as reported by objdump -d
36888 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
36889 Signed-off-by: Ben Warren <bwarren@qstreams.com>
36891 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
36892 Author: Wolfgang Denk <wd@denx.de>
36893 Date: Wed Jun 6 16:26:56 2007 +0200
36895 Coding Style cleanup; generate new CHANGELOG file.
36897 Signed-off-by: Wolfgang Denk <wd@denx.de>
36899 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
36900 Author: Markus Klotzbuecher <mk@denx.de>
36901 Date: Wed Jun 6 11:49:44 2007 +0200
36903 TRAB, USB: update trab board configuration for use of generic ohci driver
36905 commit dace45acd1c1357daa9322099d07c9a9e08b0024
36906 Author: Markus Klotzbuecher <mk@denx.de>
36907 Date: Wed Jun 6 11:49:43 2007 +0200
36909 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
36911 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
36912 Author: Markus Klotzbuecher <mk@denx.de>
36913 Date: Wed Jun 6 11:49:43 2007 +0200
36915 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
36917 commit fc43be478f2aa37ce38acd85355038866e4162af
36918 Author: Markus Klotzbuecher <mk@denx.de>
36919 Date: Wed Jun 6 11:49:35 2007 +0200
36921 USB/OHCI: endianness cleanup in the generic ohci driver
36923 commit c440bfe6d6d92d66478a7e84402b31f48413617b
36924 Author: Stefan Roese <sr@denx.de>
36925 Date: Wed Jun 6 11:42:13 2007 +0200
36927 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
36929 This patch adds NAND booting support for the AMCC Acadia eval board.
36931 Please make sure to configure jumper J7 to position 2-3 when booting
36932 from NOR, and to position 1-2 when booting for NAND.
36934 I also added a board command to configure the I2C bootstrap EEPROM
36935 values. Right now only 267MHz is support for booting either via NOR
36936 or NAND FLASH. Here the usage:
36938 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
36939 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
36941 Signed-off-by: Stefan Roese <sr@denx.de>
36943 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
36944 Author: Rodolfo Giometti <giometti@linux.it>
36945 Date: Wed Jun 6 10:08:14 2007 +0200
36947 Files include/linux/byteorder/{big,little}_endian.h define
36948 __BIG_ENDIAN and __LITTLE_ENDIAN.
36950 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
36952 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
36953 Author: Zhang Wei <wei.zhang@freescale.com>
36954 Date: Wed Jun 6 10:08:14 2007 +0200
36956 Add USB PCI-OHCI, USB keyboard and event poll support to the
36957 MPC8641HPCN board config file.
36959 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
36961 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
36962 Author: Zhang Wei <wei.zhang@freescale.com>
36963 Date: Wed Jun 6 10:08:14 2007 +0200
36965 USB PCI-OHCI, interrupt pipe and usb event poll support
36967 This patch added USB PCI-OHCI chips support, interrupt pipe support
36968 and usb event poll support. For supporting the USB interrupt pipe, the
36969 globe urb_priv is moved to purb in ed struct. Now, we can process
36970 several urbs at one time. The interrupt pipe support codes are ported
36971 from Linux kernel 2.4.
36973 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
36975 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
36976 Author: Zhang Wei <wei.zhang@freescale.com>
36977 Date: Wed Jun 6 10:08:13 2007 +0200
36979 USB event poll support
36981 This patch adds USB event poll support, which could be used in usbkbd
36982 and other usb devices driver when the asynchronous interrupt
36983 processing is supported.
36985 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
36987 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
36988 Author: Rodolfo Giometti <giometti@linux.it>
36989 Date: Wed Jun 6 10:08:12 2007 +0200
36991 ISP116x: delay for crappy USB keys
36993 Using some (very) slow USB keys cause the USB host controller buffers
36994 are not ready to be read by the CPU so we need an extra delay before
36995 reading the USB storage data.
36997 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
36999 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
37000 Author: Markus Klotzbuecher <mk@denx.de>
37001 Date: Wed Jun 6 10:08:12 2007 +0200
37003 Change duplicate usb_cpu_init_fail to usb_board_init_fail
37005 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
37008 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
37010 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
37011 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37012 Date: Tue Jun 5 12:30:52 2007 -0500
37014 mpc8641 image size cleanup
37016 e600 does not have a bootpg restriction.
37017 Move the version string to beginning of image at fff00000.
37018 Resetvec.S is not needed.
37019 Update flash copy instructions.
37020 Add tftpflash env variable
37022 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37023 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37025 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
37026 Author: Benoît Monin <bmonin@adeneo.eu>
37027 Date: Mon Jun 4 08:36:05 2007 +0200
37029 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
37031 The attached patch is mainly cosmetic, allowing u-boot to
37032 display the correct bootstrap option letter according to the
37035 The original patch was extended with 405EZ support by Stefan
37038 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
37039 Signed-off-by: Stefan Roese <sr@denx.de>
37041 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
37042 Author: Nikita V. Youshchenko <yoush@debian.org>
37043 Date: Wed May 23 12:45:19 2007 +0400
37045 fix compilation problem for mpc8349itx CFG_RAMBOOT
37047 Current include/configs/MPC8349ITX.h does contain some support for building
37048 image that will be started from memory (without putting in into flash).
37049 It could be triggered by building with TEXT_BASE set to a low value.
37051 However, this support is incomplete: using of low TEXT_BASE causes
37052 defining configuration macros in inconsistent way, which later leads
37053 to compilation errors. In particular. flash support is being disabled,
37054 but then flash structures get referenced.
37056 This patch fixes this, making it possible to build with low TEXT_BASE.
37058 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
37060 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37062 commit 8a364f0970de49949d635e60accf463c6443ef8c
37063 Author: Nikita V. Youshchenko <yoush@debian.org>
37064 Date: Wed May 23 12:45:25 2007 +0400
37066 add missing 'console' var to default mpc8349itx config
37068 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37070 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
37071 Author: Stefan Roese <sr@denx.de>
37072 Date: Fri Jun 1 16:18:17 2007 +0200
37074 ppc4xx: Add missing file for Bamboo NAND booting support
37076 Signed-off-by: Stefan Roese <sr@denx.de>
37078 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
37079 Author: Stefan Roese <sr@denx.de>
37080 Date: Fri Jun 1 15:58:19 2007 +0200
37082 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
37084 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
37085 suggested by AMCC it is not recommended to dynamically change the EBC
37086 speed after bootup. So we undo this change to be on the safe side.
37088 Signed-off-by: Stefan Roese <sr@denx.de>
37090 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
37091 Author: Stefan Roese <sr@denx.de>
37092 Date: Fri Jun 1 15:29:04 2007 +0200
37094 ppc4xx: Update Sequoia NAND booting support with ECC
37096 Signed-off-by: Stefan Roese <sr@denx.de>
37098 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
37099 Author: Stefan Roese <sr@denx.de>
37100 Date: Fri Jun 1 15:27:11 2007 +0200
37102 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
37104 This patch adds NAND booting support for the AMCC Bamboo eval board.
37105 Since the NAND-SPL boot image is limited to 4kbytes, this version
37106 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
37107 supported, since the setup code for I2C DIMM autodetection and
37108 configuration is too big for this NAND bootloader.
37110 Signed-off-by: Stefan Roese <sr@denx.de>
37112 commit 42be56f53c8b107868e6125c8524ae84293e95a7
37113 Author: Stefan Roese <sr@denx.de>
37114 Date: Fri Jun 1 15:23:04 2007 +0200
37116 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
37118 The U-Boot NAND booting support is now extended to support ECC
37119 upon loading of the NAND U-Boot image.
37121 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
37123 Signed-off-by: Stefan Roese <sr@denx.de>
37125 commit a471db07fbb65a841ffc9f4f112562b945230f98
37126 Author: Stefan Roese <sr@denx.de>
37127 Date: Fri Jun 1 15:19:29 2007 +0200
37129 ppc4xx: Prepare Bamboo port for NAND booting support
37131 This patch updates the "normal" Bamboo NOR booting port, so
37132 that it is compatible with the coming soon NAND booting
37135 It also enables the 2nd NAND flash on the Bamboo.
37137 Signed-off-by: Stefan Roese <sr@denx.de>
37139 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
37140 Author: Stefan Roese <sr@denx.de>
37141 Date: Fri Jun 1 15:16:58 2007 +0200
37143 ppc4xx: Update in_be32() functions and friends to latest Linux version
37145 Signed-off-by: Stefan Roese <sr@denx.de>
37147 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
37148 Author: Stefan Roese <sr@denx.de>
37149 Date: Fri Jun 1 15:15:12 2007 +0200
37151 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
37153 This patch adds hardware ECC support to the NDFC driver. It also
37154 changes the register access from using the "simple" in32/out32
37155 functions to the in_be32/out_be32 functions, which make sure
37156 that the access is correctly synced. This is the only recommended
37157 access to SoC registers in the current Linux kernel.
37159 Signed-off-by: Stefan Roese <sr@denx.de>
37161 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
37162 Author: Stefan Roese <sr@denx.de>
37163 Date: Fri Jun 1 15:12:15 2007 +0200
37165 NAND: Update nand_ecc.c to latest Linux version
37167 This patch updates the nand_ecc code to the latest Linux version.
37168 The main reason for this is the more compact code. This makes
37169 it possible to include the ECC code into the NAND bootloader
37170 image (NAND_SPL) for PPC4xx.
37172 Signed-off-by: Stefan Roese <sr@denx.de>
37174 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
37175 Author: Stefan Roese <sr@denx.de>
37176 Date: Fri Jun 1 15:09:50 2007 +0200
37178 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
37180 Signed-off-by: Stefan Roese <sr@denx.de>
37182 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
37183 Author: Stefan Roese <sr@denx.de>
37184 Date: Fri Jun 1 13:45:24 2007 +0200
37186 ppc4xx: Change Luan config file to support ECC
37188 With the updated 44x DDR2 driver the Luan board now supports
37189 ECC generation and checking.
37191 Signed-off-by: Stefan Roese <sr@denx.de>
37193 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
37194 Author: Stefan Roese <sr@denx.de>
37195 Date: Fri Jun 1 13:45:00 2007 +0200
37197 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
37199 Add config option for 180 degree advance clock control as needed
37200 for the AMCC Luan eval board.
37202 Signed-off-by: Stefan Roese <sr@denx.de>
37204 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
37205 Author: Wolfgang Denk <wd@denx.de>
37206 Date: Thu May 31 17:20:09 2007 +0200
37208 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
37210 Signed-off-by: Wolfgang Denk <wd@denx.de>
37212 commit 7049288fb1f16f1b317140226cdebd07bd416395
37213 Author: Bartlomiej Sieka <tur@semihalf.com>
37214 Date: Sun May 27 17:26:46 2007 +0200
37216 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
37218 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37220 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
37221 Author: Bartlomiej Sieka <tur@semihalf.com>
37222 Date: Sun May 27 17:06:36 2007 +0200
37224 Motion-PRO: Add support for redundant environment.
37226 Enable redundant environment, add a MTD partition for it; also add env.
37227 variable command for passing MTD partitions to the kernel command line.
37229 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37230 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37232 commit a26eabeec31746f06d309103690892805696e344
37233 Author: Bartlomiej Sieka <tur@semihalf.com>
37234 Date: Sun May 27 17:05:11 2007 +0200
37236 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
37238 Allow passing longer command line to the kernel - useful especially
37239 for passing MTD partition layout.
37241 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37242 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37244 commit 9160b96f71483a116de81c68985e8ee306d36764
37245 Author: Bartlomiej Sieka <tur@semihalf.com>
37246 Date: Sun May 27 17:04:18 2007 +0200
37248 Fix: Add missing NULL termination in strings expanded by macros parser.
37250 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37251 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37253 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
37254 Author: Bartlomiej Sieka <tur@semihalf.com>
37255 Date: Sun May 27 17:03:37 2007 +0200
37257 Motion-PRO: Update EEPROM's page write bits and write delay.
37259 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
37260 have a page write capability of two bytes", and "This device offers fast (1ms)
37261 byte write". Add 3ms of extra delay.
37263 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37264 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37266 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
37267 Author: Bartlomiej Sieka <tur@semihalf.com>
37268 Date: Sun May 27 16:58:45 2007 +0200
37270 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
37272 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
37273 networking does not function. This commit switches PHY to TX mode by clearing
37274 the FX_SEL bit of Mode Control Register. It also reverses commit
37275 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
37277 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
37278 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37280 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
37281 Author: Bartlomiej Sieka <tur@semihalf.com>
37282 Date: Sun May 27 16:57:15 2007 +0200
37284 Motion-PRO: Add support for the temperature sensor.
37286 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37287 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37289 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
37290 Author: Bartlomiej Sieka <tur@semihalf.com>
37291 Date: Sun May 27 16:55:23 2007 +0200
37293 Motion-PRO: Add displaying of CPLD revision information during boot.
37295 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
37296 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37298 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
37299 Author: Bartlomiej Sieka <tur@semihalf.com>
37300 Date: Sun May 27 16:53:43 2007 +0200
37302 MPC5xxx: Change names of defines related to IPB and PCI clocks.
37304 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
37305 them does not cause PCI or IPB clocks to run at the specified speed.
37306 Instead, they configure divisors used to calculate said clocks. This
37307 patch renames the defines according to their real function.
37309 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
37310 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37312 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
37313 Author: Bartlomiej Sieka <tur@semihalf.com>
37314 Date: Sun May 27 16:51:48 2007 +0200
37316 Motion-PRO: Add LED support.
37318 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
37319 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37320 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37322 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
37323 Author: Ulf Samuelsson <ulf@atmel.com>
37324 Date: Thu May 24 12:12:47 2007 +0200
37326 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
37328 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
37329 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
37330 Signed-off-by: Stefan Roese <sr@denx.de>
37332 commit d756894722c888d09a9fa1df8323753772d3dcce
37333 Author: Stefan Roese <sr@denx.de>
37334 Date: Thu May 24 09:49:00 2007 +0200
37336 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
37338 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
37339 fixes a small bug in the 405EZ OCM initialization. Thanks for
37342 Signed-off-by: Stefan Roese <sr@denx.de>
37344 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
37345 Author: Stefan Roese <sr@denx.de>
37346 Date: Thu May 24 08:22:09 2007 +0200
37348 ppc4xx: Update AMCC Acadia support for board revision 1.1
37350 This patch updates the Acadia (405EZ) support for the new 1.1 board
37351 revision. It also adds support for NAND FLASH via the 4xx NDFC.
37353 Please note that the jumper J7 must be in position 2-3 for this
37354 NAND support. Position 1-2 is for NAND booting only. NAND booting
37355 support will follow later.
37357 Signed-off-by: Stefan Roese <sr@denx.de>
37359 commit 822d55365bb557e084d0e33625a6dedcc866110b
37360 Author: Jon Loeliger <jdl@freescale.com>
37361 Date: Wed May 23 14:09:46 2007 -0500
37363 Add LIST_86xx MAKEALL target for PowerPC builds.
37365 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37367 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
37368 Author: Stefan Roese <sr@denx.de>
37369 Date: Tue May 22 12:48:09 2007 +0200
37371 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
37373 Signed-off-by: Stefan Roese <sr@denx.de>
37375 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
37376 Author: Stefan Roese <sr@denx.de>
37377 Date: Tue May 22 12:46:10 2007 +0200
37379 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
37381 This patch adds support for 405 PPC's to the 4xx NAND driver
37382 ndfc.c. This is in preparation for the new AMCC 405EZ.
37384 Signed-off-by: Stefan Roese <sr@denx.de>
37386 commit 10603d76767426be803dadd4fb688b97eb69481c
37387 Author: Stefan Roese <sr@denx.de>
37388 Date: Mon May 21 07:41:22 2007 +0200
37390 ppc4xx: Fix problem in 405EZ OCM initialization
37392 As spotted by Bruce Adler this patch fixes an initialization problem
37395 Signed-off-by: Stefan Roese <sr@denx.de>
37397 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
37398 Author: Peter Pearse <peter.pearse@arm.com>
37399 Date: Fri May 18 16:47:03 2007 +0100
37401 Reduce line lengths to 80 characters max.
37403 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
37404 Author: Peter Pearse <peter.pearse@arm.com>
37405 Date: Fri May 18 14:34:07 2007 +0100
37407 Makefile permissions
37409 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
37410 Author: Peter Pearse <peter.pearse@arm.com>
37411 Date: Fri May 18 14:33:11 2007 +0100
37413 Makefile permissions
37415 commit 255a3577c848706441daee0174543efe205a77f8
37416 Author: Kim Phillips <kim.phillips@freescale.com>
37417 Date: Wed May 16 16:52:19 2007 -0500
37419 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
37421 For all practical u-boot purposes, TSECs don't differ throughout the
37422 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
37424 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37426 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
37427 Author: Stefano Babic <sbabic@denx.de>
37428 Date: Wed May 16 14:49:12 2007 +0200
37430 Fix compile problem cause my Microblaze merge
37432 Signed-off-by: Stefano Babic <sbabic@denx.de>
37434 commit ada4697d0230d6da552867777f98a67ec3ba2579
37435 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37436 Date: Wed May 16 13:23:10 2007 +0200
37438 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
37440 Because the Sequoia board does not boot with an EBC faster than 66MHz,
37441 the clock divider are changed after the initial boot process.
37443 This allows for maximum clocking speeds to be achieved on newer boards.
37444 Sequoia boards with 666.66 MHz processors require that the EBC divider
37445 be set to 3 in order to start the initial boot process at a slower EBC
37446 speed. After the initial boot process, the divider can be set back to 2,
37447 which will cause the boards to run at 83.333MHz. This is backward
37448 compatible with boards with 533.33 MHz processors, as these boards will
37449 already be set with an EBC divider of 2.
37451 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37453 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
37454 Author: Wolfgang Denk <wd@denx.de>
37455 Date: Wed May 16 01:16:53 2007 +0200
37457 Minor Coding Style cleanup, update CHANGELOG.
37459 Signed-off-by: Wolfgang Denk <wd@denx.de>
37461 commit d62f64cc23a940eafe712c776b3249e4160753d1
37462 Author: Wolfgang Denk <wd@denx.de>
37463 Date: Wed May 16 00:13:33 2007 +0200
37465 Coding Style Cleanup, new CHANGELOG
37467 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
37468 Author: Wolfgang Denk <wd@denx.de>
37469 Date: Tue May 15 23:38:05 2007 +0200
37471 Minor coding style cleanup.
37473 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
37474 Author: mushtaq khan <mushtaq_k@procsys.com>
37475 Date: Fri Apr 20 14:23:02 2007 +0530
37477 Add driver for S-ATA-controller on Intel processors with South
37478 Bridge, ICH-5, ICH-6 and ICH-7.
37482 1. Code is divided in to two files. All functions, which are
37483 controller specific are kept in "drivers/ata_piix.c" file and
37484 functions, which are not controller specific, are kept in
37485 "common/cmd_sata.c" file.
37487 2. Reading and Writing from the S-ATA drive is done using PIO method.
37489 3. Driver can be configured for 48-bit addressing by defining macro
37490 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
37493 4. S-ATA read function is hooked to the File system, commands like
37494 ext2ls and ext2load file can be used. This has been tested.
37496 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
37497 controller and identifies the S-ATA drives connected to it.
37499 6. U-Boot command "sata" is added, which is used to read/write, print
37500 partition table and get info about the drives present. This I have
37501 implemented in same way as "ide" command is implemented in U-Boot.
37503 7. This driver is for S-ATA in native mode.
37505 8. This driver does not support the Native command queuing and
37508 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
37510 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
37511 Author: mushtaq khan <mushtaq_k@procsys.com>
37512 Date: Mon Apr 30 15:57:22 2007 +0530
37514 Fixes bug clearing the bss section for i386
37517 There is a bug in the code of clearing the bss section for processor
37518 i386.(File: cpu/i386/start.S)
37519 In the code, bss_start addr (starting addr of bss section) is put into
37520 the register %eax, but the code which clears the bss section refers to
37521 the addr pointed by %edi.
37523 This patch fixes this bug by putting bss_start into %edi register.
37525 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
37527 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
37528 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
37529 Date: Mon Apr 30 16:47:28 2007 -0500
37531 Add support for BCM5464 Quad Phy
37533 Added support for Broadcom's BCM5464 Quad Phy
37535 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
37537 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
37538 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
37539 Date: Wed May 9 08:10:57 2007 +0800
37541 Search the exception table with linear algorithm
37543 Search the exception table with linear algorithm instead of
37544 bisecting algorithm.
37545 Because the exception table might be unsorted.
37547 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
37549 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
37550 Author: Aubrey.Li <aubrey.adi@gmail.com>
37551 Date: Mon May 14 11:47:35 2007 +0800
37553 Fix compilation issues on MACOSX
37555 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
37556 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
37558 commit 56fd7162985c412317bbf763a225fba23c64fd31
37559 Author: Stephen Williams <steve@icarus.com>
37560 Date: Tue May 15 07:55:42 2007 -0700
37562 Fix for compile of JSE target
37564 The attached patch fixes the compile of the JSE board in the
37565 denx git as of 14 may 2007. It is an extremely simple patch,
37566 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
37568 Fix to compile JSE against 20070514 git of u-boot
37570 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
37571 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
37572 Date: Sun May 13 21:01:03 2007 +0900
37574 sh: MS7750SE support.
37576 This adds support for the Hitachi MS7750SE.
37578 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
37580 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
37581 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
37582 Date: Sun May 13 20:58:00 2007 +0900
37584 sh: First support code of SuperH.
37586 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
37588 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
37589 Author: Stefan Roese <sr@denx.de>
37590 Date: Fri May 11 12:01:49 2007 +0200
37592 ppc4xx: Add mtcpr/mfcpr access macros
37594 Signed-off-by: Stefan Roese <sr@denx.de>
37596 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
37597 Author: Stefan Roese <sr@denx.de>
37598 Date: Fri May 11 12:01:06 2007 +0200
37600 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
37602 Signed-off-by: Stefan Roese <sr@denx.de>
37604 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
37605 Author: Piotr Kruszynski <ppk@semihalf.com>
37606 Date: Thu May 10 16:55:52 2007 +0200
37608 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
37611 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
37612 Author: Peter Pearse <peter.pearse@arm.com>
37613 Date: Wed May 9 11:42:44 2007 +0100
37615 Add the board directory for SMN42
37617 commit 160131bf965785419626df6c388729fe0b597992
37618 Author: Peter Pearse <peter.pearse@arm.com>
37619 Date: Wed May 9 11:41:58 2007 +0100
37621 Add the files for the SMN42 board
37623 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
37624 Author: Peter Pearse <peter.pearse@arm.com>
37625 Date: Wed May 9 11:40:34 2007 +0100
37627 Remove the deleted files for the SMN42 patch
37629 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
37630 Author: Peter Pearse <peter.pearse@arm.com>
37631 Date: Wed May 9 11:37:56 2007 +0100
37633 New board SMN42 branch
37635 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
37636 Author: Peter Pearse <peter.pearse@arm.com>
37637 Date: Wed May 9 10:24:38 2007 +0100
37639 Makefile permissions
37641 commit b84289b595731e8851df46e893845cc1322c9b9b
37642 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37643 Date: Tue May 8 14:17:07 2007 -0500
37645 8641hpcn: Fix Makefile after moving pixis to board/freescale.
37647 The OBJTREE != SRCTREE build scenario was broken.
37650 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37651 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37653 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
37654 Author: Michal Simek <monstr@monstr.eu>
37655 Date: Tue May 8 15:57:43 2007 +0200
37657 add: reading special purpose registers
37659 commit 1a50f164beb065f360fbddb76029607d6b099698
37660 Author: Michal Simek <monstr@monstr.eu>
37661 Date: Tue May 8 14:52:52 2007 +0200
37663 add: Microblaze V5 exception handling
37665 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
37666 Author: Michal Simek <monstr@monstr.eu>
37667 Date: Tue May 8 14:39:11 2007 +0200
37669 add: FSL control read and write
37671 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
37672 Author: Piotr Kruszynski <ppk@semihalf.com>
37673 Date: Tue May 8 13:05:44 2007 +0200
37675 [Motion-PRO] Add support for I2C, EEPROM and RTC.
37677 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
37678 Author: Bartlomiej Sieka <tur@semihalf.com>
37679 Date: Tue May 8 10:23:56 2007 +0200
37681 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
37684 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
37685 Author: Bartlomiej Sieka <tur@semihalf.com>
37686 Date: Tue May 8 09:39:12 2007 +0200
37688 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
37689 eliminates networking problems in Linux (timeouts).
37691 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
37692 Author: Bartlomiej Sieka <tur@semihalf.com>
37693 Date: Tue May 8 09:21:57 2007 +0200
37695 [Motion-PRO] Enable Flat Device Tree support and modify default environment
37696 to allow booting of FDT-expecting kernels.
37698 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
37699 Author: Michal Simek <monstr@monstr.eu>
37700 Date: Mon May 7 23:58:31 2007 +0200
37702 new: USE_MSR_INTR support
37704 commit 008861a2f3ef2c062744d733787c7e530a1b8761
37705 Author: Bartlomiej Sieka <tur@semihalf.com>
37706 Date: Mon May 7 22:36:15 2007 +0200
37708 [MPC5xxx] There are networking problems on the Motion-PRO board with
37709 current PHY initalization code (tftp timeouts all the time). This commit
37710 temporarily disables PHY initalization sequence to make the networking
37711 operational, until a fix is found.
37713 commit abca901869c3760b6c5fecb825db6c1d91a78a93
37714 Author: Wolfgang Denk <wd@denx.de>
37715 Date: Mon May 7 22:10:36 2007 +0200
37717 Get rid of duplicated file (see include/configs/sbc8560.h instead)
37719 Signed-off-by: Wolfgang Denk <wd@denx.de>
37721 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
37722 Author: Wolfgang Denk <wd@denx.de>
37723 Date: Mon May 7 22:07:08 2007 +0200
37725 Get rid of duplicated file (see doc/README.SBC8560 instead)
37727 Signed-off-by: Wolfgang Denk <wd@denx.de>
37729 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
37730 Author: Michal Simek <monstr@monstr.eu>
37731 Date: Mon May 7 19:43:10 2007 +0200
37733 fix: read and write MSR - repair number of parameters
37735 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
37736 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37737 Date: Mon May 7 19:42:49 2007 +0200
37739 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
37741 A '3' got cut off in the formatting of the last patch to automatically
37742 change the clock speed of the system clock on sequoia board.
37744 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37745 Signed-off-by: Stefan Roese <sr@denx.de>
37747 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
37748 Author: Michal Simek <monstr@monstr.eu>
37749 Date: Mon May 7 19:33:51 2007 +0200
37751 new: fsl interrupt support
37752 FSL_Has_data is connected to INTC.
37754 commit 792032baa7d625e34c981ab6df521911bd8dc861
37755 Author: Michal Simek <monstr@monstr.eu>
37756 Date: Mon May 7 19:30:12 2007 +0200
37758 fix: interrupt handler
37761 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
37762 Author: Michal Simek <monstr@monstr.eu>
37763 Date: Mon May 7 19:25:08 2007 +0200
37765 fix: remove asm code
37767 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
37768 Author: Michal Simek <monstr@monstr.eu>
37769 Date: Mon May 7 19:12:43 2007 +0200
37771 fix: clean interrupt
37773 commit 42efed6130c8fcf7da881385b5427065d2801757
37774 Author: Michal Simek <monstr@monstr.eu>
37775 Date: Mon May 7 17:22:25 2007 +0200
37777 fix: interrupt handler for multiple sources
37779 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
37780 Author: Michal Simek <monstr@monstr.eu>
37781 Date: Mon May 7 17:11:09 2007 +0200
37783 new: add writing to msr register
37785 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
37786 Author: Markus Klotzbuecher <mk@denx.de>
37787 Date: Mon May 7 16:43:56 2007 +0200
37789 Fix an ancient CHANGELOG conflict
37791 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
37792 Author: Timur Tabi <timur@freescale.com>
37793 Date: Sat May 5 08:12:30 2007 +0200
37795 5xxx: write MAC address to mac-address and local-mac-address
37797 Some device trees have a mac-address property, some have local-mac-address,
37798 and some have both. To support all of these device trees, ftp_cpu_setup()
37799 should write the MAC address to mac-address and local-mac-address, if they
37802 Signed-off-by: Timur Tabi <timur@freescale.com>
37803 Acked-by: Grant Likely <grant.likely@secretlab.ca>
37805 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
37806 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
37807 Date: Sun Apr 29 14:01:54 2007 +0200
37809 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
37811 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
37812 message. Use PVR to distinguish between the two variants, and print proper CPU
37815 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
37816 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37817 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
37819 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
37820 Author: Ladislav Michl <ladis@linux-mips.org>
37821 Date: Wed Apr 25 16:01:26 2007 +0200
37823 [PATCH] simplify silent console
37825 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
37826 Acked-by: Stefan Roese <sr@denx.de>
37828 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
37829 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
37830 Date: Mon Apr 23 15:30:39 2007 +0200
37832 [PATCH] Avoid assigning PCI resources from zero address
37834 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
37835 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
37836 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
37837 sentence about "0" being considered an invalid address) -- so, use a reasonable
37838 starting value of 0x1000 (that's what the most Linux archs are using).
37840 Alternatively, one might have fixed the calls to pci_set_region() individually
37841 (some code even seems to have taken care of this issue) but that would have
37842 been a lot more work. :-)
37844 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
37845 Acked-by: Stefan Roese <sr@denx.de>
37847 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
37848 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37849 Date: Mon Apr 23 14:00:11 2007 +0200
37851 [patch] setenv(...) can delete environmentalvariables
37853 update setenv() function so that entering a NULL value for the
37854 variable's value will delete the environmental variable
37856 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37857 Acked-by: Stefan Roese <sr@denx.de>
37859 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
37860 Author: Mike Frysinger <vapier@gentoo.org>
37861 Date: Mon Apr 23 13:54:24 2007 +0200
37863 [patch] use unsigned char in smc91111 driver for mac
37865 the v_mac variable in the smc91111 driver is declared as a signed char ...
37866 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
37867 because when it gets printed out, you get a display like:
37868 0xFFFFFFE0 and that's no good
37870 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37872 commit ffc50f9bb194343c6303517a517708457a5eb6b8
37873 Author: Michal Simek <monstr@monstr.eu>
37874 Date: Sat May 5 18:54:42 2007 +0200
37876 new: FSL and MSR support #2
37878 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
37879 Author: Michal Simek <monstr@monstr.eu>
37880 Date: Sat May 5 18:27:16 2007 +0200
37882 new: FSL and MSR support
37884 commit 2f15278c2eb911c668b4fe562130b78cf554d139
37885 Author: Wolfgang Denk <wd@denx.de>
37886 Date: Sat May 5 18:23:11 2007 +0200
37888 Coding stylke cleanup; update CHANGELOG.
37890 Signed-off-by: Wolfgang Denk <wd@denx.de>
37892 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
37893 Author: Wolfgang Denk <wd@denx.de>
37894 Date: Sat May 5 18:05:02 2007 +0200
37896 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
37898 Signed-off-by: Wolfgang Denk <wd@denx.de>
37900 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
37901 Author: Wolfgang Denk <wd@denx.de>
37902 Date: Sat May 5 17:15:50 2007 +0200
37904 Make "file" command happy with some config.mk files; update CHANGELOG
37906 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
37907 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37908 Date: Sat May 5 08:32:14 2007 +0200
37910 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
37912 The AMCC Secquoia board has been changed in a new revision from using a
37913 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
37914 indicates the difference. This patch reads that bit and uses the correct
37915 clock speed for the board. This code is backward compatable will all
37916 prior boards. All prior boards will be read as 33.000.
37918 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37919 Signed-off-by: Stefan Roese <sr@denx.de>
37921 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
37922 Author: Stefan Roese <sr@denx.de>
37923 Date: Sat May 5 08:29:01 2007 +0200
37925 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
37927 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
37928 for the 4k NAND boot image so define bus_frequency to 133MHz here
37929 which is save for the refresh counter setup.
37931 Signed-off-by: Stefan Roese <sr@denx.de>
37933 commit 2f550ab976405300f5b07bf2890800840d0aa05f
37934 Author: Timur Tabi <timur@freescale.com>
37935 Date: Sat May 5 08:12:30 2007 +0200
37937 5xxx: write MAC address to mac-address and local-mac-address
37939 Some device trees have a mac-address property, some have local-mac-address,
37940 and some have both. To support all of these device trees, ftp_cpu_setup()
37941 should write the MAC address to mac-address and local-mac-address, if they
37944 Signed-off-by: Timur Tabi <timur@freescale.com>
37945 Acked-by: Grant Likely <grant.likely@secretlab.ca>
37947 commit a79886590593ba1d667c840caa4940c61639f18f
37948 Author: Thomas Knobloch <knobloch@siemens.com>
37949 Date: Sat May 5 07:04:42 2007 +0200
37951 NAND: Wrong calculation of page number in nand_block_bad()
37953 In case that there is no memory based bad block table available the
37954 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
37955 nand_block_bad() directly. When parameter 'getchip' is set to zero,
37956 nand_block_bad() will not right shift the offset to calculate the
37957 correct page number.
37959 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
37960 Signed-off-by: Stefan Roese <sr@denx.de>
37962 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
37963 Author: Wolfgang Denk <wd@denx.de>
37964 Date: Fri May 4 10:02:33 2007 +0200
37966 Fix initrd length corruption in bootm command.
37968 When using FDT Images, the length of an inital ramdisk was
37969 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
37971 Patches by Timur Tabi & Johns Daniel.
37973 Signed-off-by: Wolfgang Denk <wd@denx.de>
37975 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
37976 Author: Kim Phillips <kim.phillips@freescale.com>
37977 Date: Thu May 3 19:43:52 2007 -0500
37979 mpc83xx: fix trivial error in MAKEALL
37981 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37983 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
37984 Author: Wolfgang Denk <wd@denx.de>
37985 Date: Thu May 3 16:34:41 2007 +0200
37987 Update board configuration for STX GP3SSA board:
37989 Enable hush shell, environment in flash rather in EEPROM,
37990 more user-friendly default environment, etc.
37991 The simple EEPROM environment can be selected easily in the board
37994 Signed-off-by: Wolfgang Denk <wd@denx.de>
37996 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
37997 Author: Wolfgang Denk <wd@denx.de>
37998 Date: Tue Apr 24 14:37:49 2007 +0200
38000 Cleanup STX GP3SSA code; fix build and compile problems.
38002 commit 35171dc04e028ecacc23ad916a66295472555dbf
38003 Author: Dan Malek <dan@embeddedalley.com>
38004 Date: Fri Jan 5 09:15:34 2007 +0100
38006 Add support for STX GP3SSA (stxssa) Board
38008 Signed-off-by Dan Malek, <dan@embeddedalley.com>
38010 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
38011 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38012 Date: Wed May 2 13:31:53 2007 +0200
38014 macb: Don't restart autonegotiation if we already have link
38016 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
38017 link is already up.
38019 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38021 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
38022 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38023 Date: Wed May 2 13:22:38 2007 +0200
38025 macb: Introduce a few barriers when dealing with DMA descriptors
38027 There were a few theoretical possibilities that the compiler might
38028 optimize away DMA descriptor reads and/or writes and thus cause
38029 synchronization problems with the hardware. Insert barriers where
38030 we depend on reads/writes actually hitting memory.
38032 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38034 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
38035 Author: Andy Fleming <afleming@freescale.com>
38036 Date: Sat Feb 24 01:08:13 2007 -0600
38038 Cleaned up some 85xx PCI bugs
38040 * Cleaned up the CDS PCI Config Tables and added NULL entries to
38042 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
38043 * Fixed 85xx PCI code to assign powar region sizes based on the
38044 config values (rather than hard-coding them)
38045 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
38047 Signed-off-by: Andy Fleming <afleming@freescale.com>
38049 commit 6743105988fc44d5b0d30388c790607835aae7a6
38050 Author: Andy Fleming <afleming@freescale.com>
38051 Date: Mon Apr 23 02:54:25 2007 -0500
38053 Add support for the 8568 MDS board
38055 This included some changes to common files:
38056 * Add 8568 processor SVR to various places
38057 * Add support for setting the qe bus-frequency value in the dts
38058 * Add the 8568MDS target to the Makefile
38060 Signed-off-by: Andy Fleming <afleming@freescale.com>
38062 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
38063 Author: David Updegraff <dave@cray.com>
38064 Date: Fri Apr 20 14:34:48 2007 -0500
38066 Add support for treating unknown PHYs as generic PHYs.
38068 When bringing up u-boot on new boards, PHY support sometimes gets
38069 neglected. Most PHYs don't really need any special support,
38070 though. By adding a generic entry that always matches if nothing
38071 else does, we can provide support for "unsupported" PHYs for the
38074 The generic PHY driver supports most PHYs, including gigabit.
38076 Signed-off-by: David Updegraff <dave@cray.com>
38077 Signed-off-by: Andy Fleming <afleming@freescale.com>
38079 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
38080 Author: James Yang <James.Yang@freescale.com>
38081 Date: Wed Feb 7 15:28:04 2007 -0600
38083 Conditionalize 8641 Rev1.0 MCM workarounds
38085 Signed-off-by: James Yang <James.Yang@freescale.com>
38086 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38088 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
38089 Author: Timur Tabi <timur@freescale.com>
38090 Date: Mon Apr 30 13:59:50 2007 -0500
38092 Fix memory initialization on MPC8349E-mITX
38094 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
38095 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
38096 on some ITX boards, notably those with a revision 3.1 CPU.
38098 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
38099 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
38101 Signed-off-by: Timur Tabi <timur@freescale.com>
38102 Acked-by: Michael Benedict <MBenedict@twacs.com>
38103 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38105 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
38106 Author: Kim Phillips <kim.phillips@freescale.com>
38107 Date: Mon Apr 30 15:26:21 2007 -0500
38109 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
38111 and fix CPU: to align with Board: display text.
38113 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38115 commit c1ab82669d9525998c34e802a12cad662723f22a
38116 Author: James Yang <James.Yang@freescale.com>
38117 Date: Fri Mar 16 13:02:53 2007 -0500
38119 Rewrote picos_to_clk() to avoid rounding errors.
38120 Clarified that conversion is to DRAM clocks rather than platform clocks.
38121 Made function static to spd_sdram.c.
38123 Signed-off-by: James Yang <James.Yang@freescale.com>
38124 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38126 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
38127 Author: Stefan Roese <sr@denx.de>
38128 Date: Sun Apr 29 14:13:01 2007 +0200
38130 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
38132 Signed-off-by: Stefan Roese <sr@denx.de>
38134 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
38135 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
38136 Date: Sun Apr 29 14:01:54 2007 +0200
38138 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
38140 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
38141 message. Use PVR to distinguish between the two variants, and print proper CPU
38144 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
38145 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
38146 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
38148 commit 5c5d3242935cf3543af01142627494434834cf98
38149 Author: Kim Phillips <kim.phillips@freescale.com>
38150 Date: Wed Apr 25 12:34:38 2007 -0500
38152 mpc83xx: minor fixups for 8313rdb introduction
38154 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
38155 Author: Ladislav Michl <ladis@linux-mips.org>
38156 Date: Wed Apr 25 16:01:26 2007 +0200
38158 [PATCH] simplify silent console
38160 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
38161 Acked-by: Stefan Roese <sr@denx.de>
38163 commit 144876a380f5756f57412caf74c1d6dc201dd796
38164 Author: Michal Simek <monstr@monstr.eu>
38165 Date: Tue Apr 24 23:01:02 2007 +0200
38167 [PATCH] MTD partition support, JFFS2 support
38169 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
38170 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38171 Date: Tue Apr 24 14:03:45 2007 +0200
38173 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
38175 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
38177 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
38178 Author: Andy Fleming <afleming@freescale.com>
38179 Date: Mon Apr 23 02:37:47 2007 -0500
38181 Reworked 85xx speed detection code
38183 Changed the code to read the registers and calculate the clock
38184 rates, rather than using a "switch" statement.
38186 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
38188 Signed-off-by: Andy Fleming <afleming@freescale.com>
38190 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
38191 Author: Andy Fleming <afleming@freescale.com>
38192 Date: Mon Apr 23 02:24:28 2007 -0500
38194 Enable 8544 support
38196 * Add support to the Makefile
38197 * Add 8544 configuration support to the tsec driver
38198 * Add 8544 SVR numbers to processor.h
38200 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38201 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38203 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
38204 Author: Andy Fleming <afleming@freescale.com>
38205 Date: Fri Feb 23 17:12:25 2007 -0600
38207 Support 1G size on 8548
38209 e500v2 and newer cores support 1G page sizes.
38211 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38212 Signed-off-by: Andy Fleming <afleming@freescale.com>
38214 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
38215 Author: Andy Fleming <afleming@freescale.com>
38216 Date: Fri Feb 23 17:11:16 2007 -0600
38218 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
38220 The other pagesz constants use one letter to specify order of
38221 magnitude. Also change the one reference to it in mpc8548cds/init.S
38223 Signed-off-by: Andy Fleming <afleming@freescale.com>
38225 commit 1f9a318cea14272edd10d63739e2d326c90f430e
38226 Author: Andy Fleming <afleming@freescale.com>
38227 Date: Fri Feb 23 16:28:46 2007 -0600
38229 Only set ddrioovcr for 8548 rev1.
38231 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38232 Signed-off-by: Andy Fleming <afleming@freescale.com>
38234 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
38235 Author: Andy Fleming <afleming@freescale.com>
38236 Date: Sat Feb 24 01:16:45 2007 -0600
38238 Tweak DDR ECC error counter
38240 Enable single-bit error counter when memory was cleared by ddr controller.
38242 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38243 Signed-off-by: Andy Fleming <afleming@freescale.com>
38245 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
38246 Author: Timur Tabi <timur@freescale.com>
38247 Date: Mon Feb 12 13:34:55 2007 -0600
38249 85xx: write MAC address to mac-address and local-mac-address
38251 Some device trees have a mac-address property, some have local-mac-address,
38252 and some have both. To support all of these device trees, ftp_cpu_setup()
38253 should write the MAC address to mac-address and local-mac-address, if they
38256 Signed-off-by: Timur Tabi <timur@freescale.com>
38258 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
38259 Author: Andy Fleming <afleming@freescale.com>
38260 Date: Mon Apr 23 01:44:44 2007 -0500
38262 Some 85xx cpu cleanups
38264 * Cleaned up the TSR[WIS] clearing
38265 * Cleaned up DMA initialization
38267 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38268 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38269 Acked-by: Andy Fleming <afleming@freescale.com>
38271 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
38272 Author: Andy Fleming <afleming@freescale.com>
38273 Date: Mon Apr 23 01:32:22 2007 -0500
38275 Add cpu support for the 8544
38277 Recognize new SVR values, and add a few register definitions
38279 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38280 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38281 Acked-by: Andy Fleming <afleming@freescale.com>
38283 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
38284 Author: Jon Loeliger <jdl@freescale.com>
38285 Date: Wed Apr 11 16:51:02 2007 -0500
38287 Add MPC8544DS basic port board files.
38289 Add board port under new board/freescale directory
38290 structure and reuse existing PIXIS FPGA support there.
38292 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38293 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38295 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
38296 Author: Jon Loeliger <jdl@freescale.com>
38297 Date: Wed Apr 11 16:50:57 2007 -0500
38299 Add MPC8544DS main configuration file.
38301 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38302 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38304 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
38305 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38306 Date: Wed Dec 27 22:07:15 2006 +0300
38308 Fix PCI I/O space mapping on Freescale MPC85x0ADS
38310 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
38311 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
38312 describing the local address window used for the PCI I/O space accesses -- fix
38313 this and carry over the necessary changes into the MPC8560ADS code since the
38314 PCI I/O space mapping was also broken for this board (by the earlier commit
38315 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
38316 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
38318 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38320 board/mpc8540ads/init.S | 4 ++--
38321 board/mpc8560ads/init.S | 4 ++--
38322 include/configs/MPC8540ADS.h | 5 ++---
38323 include/configs/MPC8541CDS.h | 2 +-
38324 include/configs/MPC8548CDS.h | 2 +-
38325 include/configs/MPC8560ADS.h | 8 ++++----
38326 6 files changed, 12 insertions(+), 13 deletions(-)
38328 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
38329 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38330 Date: Tue Dec 5 16:42:30 2006 +0800
38332 u-boot: Fix e500 v2 core reset bug
38334 The following patch fixes the e500 v2 core reset bug.
38335 For e500 v2 core, a new reset control register is added to reset the
38338 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38340 commit 63247a5acd58032e6cf33f525bc3923b467bac88
38341 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38342 Date: Wed Dec 20 11:01:00 2006 +0800
38344 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
38346 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
38347 entry number to control the loop. This can reduce the potential risk
38348 for the 85xx processor increasing its TLB adn LAW entry number.
38350 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
38351 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38353 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
38354 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38355 Date: Mon Dec 18 17:01:04 2006 +0800
38357 u-boot: Fix the 85xxcds tsec bug
38359 Fix the 85xxcds tsec bug.
38360 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
38362 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38364 commit 7337b237ffc4aaf1b9467024fe472a880d852598
38365 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38366 Date: Fri Dec 15 14:43:31 2006 +0800
38368 u-boot: Fix CPU2 errata on MPC8548CDS board
38370 This patch apply workaround of CPU2 errata on MPC8548CDS board.
38372 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
38374 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
38375 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
38376 Date: Mon Dec 18 16:25:15 2006 +0800
38378 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
38380 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
38382 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
38384 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
38385 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38386 Date: Thu Dec 14 14:14:55 2006 +0800
38388 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
38390 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
38392 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38394 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
38395 Author: Scott Wood <scottwood@freescale.com>
38396 Date: Mon Apr 16 14:54:15 2007 -0500
38398 mpc83xx: Add MPC8313ERDB support.
38400 Signed-off-by: Scott Wood <scottwood@freescale.com>
38402 commit 49ea3b6eafe606285ae4d5c378026153dde53200
38403 Author: Scott Wood <scottwood@freescale.com>
38404 Date: Mon Apr 16 14:34:21 2007 -0500
38406 mpc83xx: Add generic PCI setup code.
38408 Board code can now request the generic setup code rather than having to
38409 copy-and-paste it for themselves. Boards should be converted to use this
38410 once they're tested with it.
38412 Signed-off-by: Scott Wood <scottwood@freescale.com>
38414 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
38415 Author: Scott Wood <scottwood@freescale.com>
38416 Date: Mon Apr 16 14:34:19 2007 -0500
38418 mpc83xx: Add 831x support to speed.c.
38420 Signed-off-by: Scott Wood <scottwood@freescale.com>
38422 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
38423 Author: Scott Wood <scottwood@freescale.com>
38424 Date: Mon Apr 16 14:34:18 2007 -0500
38426 mpc83xx: Add 831x support to global_data.h
38428 Signed-off-by: Scott Wood <scottwood@freescale.com>
38430 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
38431 Author: Scott Wood <scottwood@freescale.com>
38432 Date: Mon Apr 16 14:34:16 2007 -0500
38434 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
38436 Rather than misleadingly define PVR_83xx as the specific type of 83xx
38437 being built for, the PVR of each core revision is defined. checkcpu() now
38438 prints the core that it detects, rather than aborting if it doesn't find
38439 what it thinks it wants.
38441 Signed-off-by: Scott Wood <scottwood@freescale.com>
38443 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
38444 Author: Scott Wood <scottwood@freescale.com>
38445 Date: Mon Apr 16 14:34:15 2007 -0500
38447 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
38449 Signed-off-by: Scott Wood <scottwood@freescale.com>
38451 commit d87c57b201b4572d16f1b642998faa00c9912b16
38452 Author: Scott Wood <scottwood@freescale.com>
38453 Date: Mon Apr 16 14:31:55 2007 -0500
38455 mpc83xx: Add register definitions for MPC831x.
38457 Signed-off-by: Scott Wood <scottwood@freescale.com>
38459 commit 7fc4c71a143be8666d70803fb25ae60379c95622
38460 Author: Stefan Roese <sr@denx.de>
38461 Date: Mon Apr 23 15:39:59 2007 +0200
38465 Signed-off-by: Stefan Roese <sr@denx.de>
38467 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
38468 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38469 Date: Mon Apr 23 15:30:39 2007 +0200
38471 [PATCH] Avoid assigning PCI resources from zero address
38473 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
38474 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
38475 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
38476 sentence about "0" being considered an invalid address) -- so, use a reasonable
38477 starting value of 0x1000 (that's what the most Linux archs are using).
38479 Alternatively, one might have fixed the calls to pci_set_region() individually
38480 (some code even seems to have taken care of this issue) but that would have
38481 been a lot more work. :-)
38483 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38484 Acked-by: Stefan Roese <sr@denx.de>
38486 commit afb903a2eb9436baa9270ccc0c27082d86497d89
38487 Author: Jeffrey Mann <mannj@embeddedplanet.com>
38488 Date: Mon Apr 23 14:00:11 2007 +0200
38490 [patch] setenv(...) can delete environmentalvariables
38492 update setenv() function so that entering a NULL value for the
38493 variable's value will delete the environmental variable
38495 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
38496 Acked-by: Stefan Roese <sr@denx.de>
38498 commit 36f104e5caa747d568eff26b369565af57c2ffa6
38499 Author: Mike Frysinger <vapier@gentoo.org>
38500 Date: Mon Apr 23 13:54:24 2007 +0200
38502 [patch] use unsigned char in smc91111 driver for mac
38504 the v_mac variable in the smc91111 driver is declared as a signed char ...
38505 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
38506 because when it gets printed out, you get a display like:
38507 0xFFFFFFE0 and that's no good
38509 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38511 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
38512 Author: Rodolfo Giometti <giometti@enneenne.com>
38513 Date: Mon Apr 23 13:10:52 2007 +0200
38515 USB: (Another) delay for crappy USB keys.
38517 Some USB keys are slow in giving back an answer when the Root HUB
38518 enables power lines.
38520 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
38522 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
38523 Author: Stefan Roese <sr@denx.de>
38524 Date: Mon Apr 23 12:00:22 2007 +0200
38526 Remove BOARDLIBS usage completely
38528 Signed-off-by: Stefan Roese <sr@denx.de>
38530 commit 32556443840f127170e4baa8bdd5b567039f6c36
38531 Author: Michal Simek <monstr@monstr.eu>
38532 Date: Sat Apr 21 21:07:22 2007 +0200
38534 [PATCH] SystemACE support for Microblaze
38536 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
38537 Author: Michal Simek <monstr@monstr.eu>
38538 Date: Sat Apr 21 21:02:40 2007 +0200
38540 16bit read/write little endian
38542 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
38543 Author: Michal Simek <monstr@monstr.eu>
38544 Date: Sat Apr 21 20:53:31 2007 +0200
38546 Change ML401 parameters - Xilinx BSP
38548 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
38549 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
38550 Date: Wed Feb 28 05:37:29 2007 -0600
38552 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
38554 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38556 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
38557 Author: Zhang Wei <wei.zhang@freescale.com>
38558 Date: Fri Jan 19 10:42:37 2007 +0800
38560 Enable LAWs for MPC8641 PCI-Ex2.
38562 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
38563 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38565 commit bd7851ce1e1f140665b520026abf1042968b1102
38566 Author: Jon Loeliger <jdl@freescale.com>
38567 Date: Fri Apr 20 14:12:26 2007 -0500
38569 mpc86xx; Write MAC address to mac-address and local-mac-address
38571 Some device trees have a mac-address property, some have local-mac-address,
38572 and some have both. To support all of these device trees, ftp_cpu_setup()
38573 should write the MAC address to mac-address and local-mac-address, if they
38576 Signed-off-by: Timur Tabi <timur@freescale.com>
38577 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38579 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
38580 Author: Jon Loeliger <jdl@freescale.com>
38581 Date: Fri Apr 20 14:11:38 2007 -0500
38583 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
38585 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38586 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38588 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
38589 Author: Wolfgang Denk <wd@denx.de>
38590 Date: Fri Apr 20 17:43:28 2007 +0200
38592 Cleanup compiler warnings, update CHANGELOG
38594 Signed-off-by: Wolfgang Denk <wd@denx.de>
38596 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
38597 Author: Detlev Zundel <dzu@denx.de>
38598 Date: Fri Apr 20 12:01:47 2007 +0200
38600 Fix breakage of NC650 board with respect to nand support.
38602 Signed-off-by: Detlev Zundel <dzu@denx.de>
38604 commit 39f23cd90947639ac278a18ff277ec786b5ac167
38605 Author: Domen Puncer <domen.puncer@telargo.com>
38606 Date: Fri Apr 20 11:13:16 2007 +0200
38608 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
38610 G2 core reference manual says decrementer and time base
38611 are decreasing/increasing once every 4 bus clock cycles.
38612 Lets fix it, so time in Linux won't run twice as fast
38614 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
38615 Acked-by: Grant Likely <grant.likely@secretlab.ca>
38617 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
38618 Author: Gerald Van Baren <vanbaren@cideas.com>
38619 Date: Thu Apr 19 23:14:39 2007 -0400
38621 Fix serious pointer bug with bootm and reserve map.
38623 What was suppose to be a stack variable was declared as a pointer,
38624 overwriting random memory.
38625 Also moved the libfdt.a requirement into the main Makefile. That is
38628 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
38629 Author: Stefan Roese <sr@denx.de>
38630 Date: Thu Apr 19 09:53:52 2007 +0200
38632 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
38634 Previous versions used full wait states for the chip select #1 which
38635 is connected to the Xilinix SystemACE controller on the AMCC Katmai
38636 evaluation board. This leads to really slow access and therefore low
38637 performance. This patch now sets up the chip select a lot faster
38638 resulting in much better read/write performance of the Linux driver.
38640 Signed-off-by: Stefan Roese <sr@denx.de>
38642 commit 37837828d89084879bee2f2b8c7c68d4695940df
38643 Author: Wolfgang Denk <wd@denx.de>
38644 Date: Wed Apr 18 17:49:29 2007 +0200
38646 Clenaup, update CHANGELOG
38648 Signed-off-by: Wolfgang Denk <wd@denx.de>
38650 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
38651 Author: Wolfgang Denk <wd@denx.de>
38652 Date: Wed Apr 18 17:20:58 2007 +0200
38656 Signed-off-by: Wolfgang Denk <wd@denx.de>
38658 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
38659 Author: Wolfgang Denk <wd@denx.de>
38660 Date: Wed Apr 18 17:07:26 2007 +0200
38662 Cleanup, update CHANGELOG
38664 Sigend-off-by: Wolfgang Denk <wd@denx.de>
38666 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
38667 Author: Wolfgang Denk <wd@denx.de>
38668 Date: Wed Apr 18 16:17:46 2007 +0200
38672 commit ad4eb555671d97f96dc56eab55103b1f86874b01
38673 Author: Wolfgang Denk <wd@denx.de>
38674 Date: Wed Apr 18 14:30:39 2007 +0200
38676 MCC200 board: remove warning which is obsolete after PSoC firmware changes
38678 Signed-off-by: Wolfgang Denk <wd@denx.de>
38680 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
38681 Author: Domen Puncer <domen.puncer@telargo.com>
38682 Date: Wed Apr 18 12:11:05 2007 +0200
38684 [PATCH] icecube/lite5200b: document wakeup from low-power support
38686 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
38688 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
38689 Author: Stefan Roese <sr@denx.de>
38690 Date: Wed Apr 18 12:07:47 2007 +0200
38692 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
38694 Signed-off-by: Stefan Roese <sr@denx.de>
38696 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
38697 Author: Stefan Roese <sr@denx.de>
38698 Date: Wed Apr 18 12:05:59 2007 +0200
38700 ppc4xx: Add output for bootrom location to 405EZ ports
38702 Now 405EZ ports also show upon bootup from which boot device
38703 they are configured to boot:
38705 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
38707 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
38708 Bootstrap Option E - Boot ROM Location EBC (32 bits)
38709 16 kB I-Cache 16 kB D-Cache
38710 Board: Acadia - AMCC PPC405EZ Evaluation Board
38712 Signed-off-by: Stefan Roese <sr@denx.de>
38714 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
38715 Author: Peter Pearse <peter.pearse@arm.com>
38716 Date: Tue Apr 17 13:30:33 2007 +0100
38718 Move ppearse to ARM board list
38719 Add Konstantin Kletschke for scb9328.
38720 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
38722 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
38723 Author: Domen Puncer <domen.puncer@telargo.com>
38724 Date: Mon Apr 16 14:00:13 2007 +0200
38726 [PATCH] icecube/lite5200b: wakeup from low-power support
38728 U-Boot part of Lite5200b low power mode support.
38729 Puts SDRAM out of self-refresh and transfers control to
38730 address saved at physical 0x0.
38732 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
38733 Acked-by: Grant Likely <grant.likely@secretlab.ca>
38735 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
38736 Author: Gerald Van Baren <vanbaren@cideas.com>
38737 Date: Sun Apr 15 13:54:26 2007 -0400
38739 Fix the ft_cpu_setup() property settings.
38741 Use "setter" functions instead of flags, cleaner and more flexible.
38742 It also fixes the problem noted by Timur Tabi that the ethernet MAC
38743 addresses were all being set incorrectly to the same MAC address.
38745 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
38746 Author: Gerald Van Baren <vanbaren@cideas.com>
38747 Date: Sat Apr 14 22:51:24 2007 -0400
38749 Improve the bootm command for CONFIG_OF_LIBFDT
38751 In bootm, create the "/chosen" node only if it doesn't already exist
38752 (better matches the previous behavior).
38753 Update for proper reserved memory map handling for initrd.
38755 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
38756 Author: Gerald Van Baren <vanbaren@cideas.com>
38757 Date: Sat Apr 14 22:46:41 2007 -0400
38759 Add some utilities to manipulate the reserved memory map.
38761 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
38762 Author: Wolfgang Denk <wd@denx.de>
38763 Date: Sat Apr 14 21:16:54 2007 +0200
38767 commit 8e6875183cdca91c134408d119d4abcd48ef6856
38768 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38769 Date: Sun Dec 17 18:56:46 2006 +0100
38771 AVR32: Enable MMC support
38773 Set up the portmux for the MMC interface and enable the MMC driver
38774 along with support for DOS partitions, ext2 and FAT filesystems.
38776 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38778 commit fc26c97bb6df41b4a95662c34054fe912387bf38
38779 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38780 Date: Fri Jan 20 10:03:53 2006 +0100
38784 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
38786 The AT91 ARM-based CPUs use basically the same hardware, so it should
38787 be possible to share this driver, but no effort has been made so far.
38789 Hardware documentation can be found in the AT32AP7000 data sheet,
38790 which can be downloaded from
38792 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
38794 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38796 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
38797 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38798 Date: Sun Dec 17 18:55:37 2006 +0100
38800 AVR32: Add clk and gpio infrastructure for mmci
38802 Implement functions for configuring the mmci pins, as well as
38803 functions for getting the clock rate of the mmci controller.
38805 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38807 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
38808 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38809 Date: Sun Dec 17 18:53:56 2006 +0100
38811 Enable partition support with MMC
38813 Include implementations of init_part() and get_partition_info() when
38816 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38818 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
38819 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38820 Date: Sun Dec 17 17:14:30 2006 +0100
38822 AVR32: Enable networking
38824 Implement MACB initialization for AVR32 and ATSTK1000, and turn
38825 everything on, including the MACB driver.
38827 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38829 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
38830 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38831 Date: Fri Jan 20 10:03:34 2006 +0100
38833 Atmel MACB ethernet driver
38835 Driver for the Atmel MACB on-chip ethernet controller.
38837 This driver has been tested on the ATSTK1000 board with a AT32AP7000
38838 CPU. It should probably work on AT91SAM926x as well with some minor
38841 Hardware documentation can be found in the AT32AP7000 data sheet,
38842 which can be downloaded from
38844 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
38846 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38848 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
38849 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38850 Date: Sun Dec 17 16:56:14 2006 +0100
38852 AVR32: Add clk and gpio infrastructure for macb0 and macb1
38854 Implement functions for configuring the macb0 and macb1 pins, as
38855 well as functions for getting the clock rate of the various
38856 busses the macb ethernet controllers are connected to.
38858 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38860 commit d5acb95b16a0a74c643524342c3437e765426d05
38861 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38862 Date: Sun Dec 17 15:39:15 2006 +0100
38864 AVR32: Implement simple DMA memory allocator
38866 Implement dma_alloc_coherent() which returns cache-aligned
38867 uncacheable memory.
38869 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38871 commit 91975b0fea773c9e681fea8cf3349669f27685ee
38872 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38873 Date: Sun Dec 17 15:46:02 2006 +0100
38875 Import <linux/mii.h> from the Linux kernel
38877 Instead of creating yet another set of MII register definitions
38878 in the macb driver, here's a complete set of definitions for everyone
38881 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38883 commit 1b804b229556a4d862da93c0ec94e79419364b2c
38884 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38885 Date: Wed Mar 21 19:47:36 2007 +0100
38887 AVR32: Include more commands for ATSTK1000
38889 Include the imi, imls and jffs commands sets by default on ATSTK1000.
38890 Also define CONFIG_BOOTARGS to something more useful, define
38891 CONFIG_BOOTCOMMAND and enable autoboot by default.
38893 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38895 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
38896 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38897 Date: Wed Mar 21 19:44:48 2007 +0100
38899 AVR32: Provide a definition of struct stat
38901 Copy the definition of struct stat from the Linux kernel.
38903 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38905 commit 12f099c08167a7a51aeee623bc16dafd0841271c
38906 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38907 Date: Sun Dec 17 14:46:06 2006 +0100
38909 AVR32: Use initdram() instead of board_init_memories()
38911 Conform to the "standard" interface and use initdram() instead of
38912 board_init_memories() on AVR32. This enables us to get rid of the
38913 sdram_size member of the global_data struct as well.
38915 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38917 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
38918 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38919 Date: Mon Nov 20 15:53:10 2006 +0100
38921 AVR32: Relocate u-boot to SDRAM
38923 Relocate the u-boot image into SDRAM like everyone else does. This
38924 means that we can handle much larger .data and .bss than we used to.
38926 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38928 commit df548d3c3e2bbc40258713167859ffc2ce99a900
38929 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38930 Date: Sun Nov 19 18:06:53 2006 +0100
38932 AVR32: Resource management rewrite
38934 Rewrite the resource management code (i.e. I/O memory, clock gating,
38935 gpio) so it doesn't depend on any global state. This is necessary
38936 because this code is heavily used before relocation to RAM, so we
38937 can't write to any global variables.
38939 As an added bonus, this makes u-boot's memory footprint a bit smaller,
38940 although some functionality has been left out; all clocks are enabled
38941 all the time, and there's no checking for gpio line conflicts.
38943 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38945 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
38946 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38947 Date: Sat Nov 18 18:01:13 2006 +0100
38949 AVR32: Clean up memory-map.h for at32ap7000
38951 Convert spaces to tabs (must have missed this one last time around),
38952 sort the entries by address and group them together by bus
38955 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38957 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
38958 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38959 Date: Sat Nov 18 17:32:31 2006 +0100
38961 AVR32: Build position-independent u-boot
38963 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
38964 position independent. This will make relocation a lot easier.
38966 -mno-init-got means that gcc shouldn't emit code to load the GOT
38967 address into r6 in every function prologue. We do it once and for
38968 all in the early startup assembly code, so enabling this option
38969 makes u-boot a bit faster and smaller.
38971 The assembly parts have always been position-independent, so no code
38972 changes should be necessary.
38974 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38976 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
38977 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38978 Date: Sat Nov 18 17:24:31 2006 +0100
38980 AVR32: Use avr32-linux- cross-compilation prefix by default
38982 It doesn't really matter which toolchain you use to compile u-boot,
38983 but the avr32-linux one is probably what most people have installed.
38985 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38987 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
38988 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38989 Date: Sat Nov 18 17:15:30 2006 +0100
38991 AVR32: Split start_u_boot into board_init_f and board_init_r
38993 Split the avr32 initialization code into a function to run before
38994 relocation, board_init_f and a function to run after relocation,
38995 board_init_r. For now, board_init_f simply calls board_init_r
38998 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39000 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
39001 Author: Heiko Schocher <hs@pollux.denx.de>
39002 Date: Sat Apr 14 05:26:48 2007 +0200
39004 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
39005 clear the Display after reset.
39007 Signed-off-by: Heiko Schocher <hs@denx.de>
39009 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
39010 Author: Denis Peter <d.peter@mpl.ch>
39011 Date: Fri Apr 13 09:13:33 2007 +0200
39013 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
39015 Fix bug introduced by "Fix get_partition_info() parameter error in all
39016 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
39017 to use diskboot or scsiboot form another device than 0.
39019 Signed-off-by: Denis Peter <d.peter@mpl.ch>
39021 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
39022 Author: Greg Lopp <lopp@pobox.com>
39023 Date: Fri Apr 13 08:02:24 2007 +0200
39025 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
39027 Signed-of-by: Greg Lopp <lopp@pobox.com>
39028 Acked-by: Grant Likely <grant.likely@secretlab.ca>
39030 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
39031 Author: Xie Xiaobo <r63061@freescale.com>
39032 Date: Fri Mar 9 19:08:25 2007 +0800
39034 Fix two bugs for MPC83xx DDR2 controller SPD Init
39036 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
39037 the first bug is that the picos_to_clk routine introduces a huge
39038 rounding error in 83xx.
39039 the second bug is that the mode register write recovery field is
39040 tWR-1, not tWR >> 1.
39042 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
39043 Author: Jeffrey Mann <mannj@embeddedplanet.com>
39044 Date: Thu Apr 12 14:15:59 2007 +0200
39046 ppc4xx: Fix i2c divisor calcularion for PPC4xx
39048 This patch fixes changes the i2c_init(...) function to use the function
39049 get_OPB_freq() rather than calculating the OPB speed by
39050 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
39051 specific per processor. The prior method was not and so was calculating
39052 the wrong speed for some PPC4xx processors.
39054 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
39055 Signed-off-by: Stefan Roese <sr@denx.de>
39057 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
39058 Author: Wolfgang Denk <wd@denx.de>
39059 Date: Wed Apr 11 17:25:01 2007 +0200
39063 Signed-off-by: Wolfgang Denk <wd@denx.de>
39065 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
39066 Author: Wolfgang Denk <wd@denx.de>
39067 Date: Wed Apr 11 17:22:55 2007 +0200
39069 Update for SC3 board
39071 * Make IDE timeout configurable through ide_reset_timeout variable.
39072 * Use Newline as "password" string
39073 * Use just a single partition in NAND flash
39075 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
39076 Author: Haiying Wang <haiying.wang@freescale.com>
39077 Date: Mon Jan 22 12:37:30 2007 -0600
39079 Add PIXIS FPGA support for MPC8641HPCN board.
39081 Move the 8641HPCN's PIXIS code to the new directory
39082 board/freescale/common/ as it will be shared by
39083 future boards not in the same processor family.
39085 Write a "pixis_reset" command that utilizes the FPGA
39086 reset sequencer to support alternate soft-reset options
39087 such as using the "alternate" flash bank, enabling
39088 the watch dog, or choosing different CPU frequencies.
39090 Add documentation for the pixis_reset to README.mpc8641hpcn.
39092 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
39093 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39095 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
39096 Author: Gerald Van Baren <vanbaren@cideas.com>
39097 Date: Fri Apr 6 14:19:43 2007 -0400
39099 Moved fdt command support code to fdt_support.c
39101 ...in preparation for improving the bootm command's handling of fdt blobs.
39102 Also cleaned up some coding sloppiness.
39104 commit 6679f9299534e488a171a9bb8f9bb891de247aab
39105 Author: Gerald Van Baren <vanbaren@cideas.com>
39106 Date: Fri Apr 6 14:17:14 2007 -0400
39108 libfdt: Make fdt_check_header() public
39110 Changed _fdt_check_header() to fdt_check_header() and made it part of
39111 the interface - it is a useful routine.
39113 Also did some asthetics cleanup to the include files (headers).
39115 commit c0707ce65677650b5ceab0500ee50ae5168afef2
39116 Author: Aubrey Li <aubrey.adi@gmail.com>
39117 Date: Thu Apr 5 18:34:06 2007 +0800
39119 [Blackfin][PATCH] Kill off a bunch of common local prototypes
39121 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
39122 Author: Aubrey Li <aubrey.adi@gmail.com>
39123 Date: Thu Apr 5 18:33:04 2007 +0800
39125 [Blackfin][PATCH] Fix dynamic CPLB generation issue
39127 commit 0445e3a264251d75b1be45ef713c70726a2952f0
39128 Author: Aubrey Li <aubrey.adi@gmail.com>
39129 Date: Thu Apr 5 18:31:47 2007 +0800
39131 [Blackfin][PATCH] minior cleanup
39133 commit 155fd766573981090e638b493d5857562151862e
39134 Author: Aubrey Li <aubrey.adi@gmail.com>
39135 Date: Thu Apr 5 18:31:18 2007 +0800
39137 [Blackfin][PATCH] Fix copyright and update license
39139 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
39140 Author: Aubrey Li <aubrey.adi@gmail.com>
39141 Date: Thu Apr 5 18:30:25 2007 +0800
39143 [Blackfin][PATCH] Add BF537 EMAC driver initialization
39145 commit 889256e8604e0c68db1d866d720894dffede9df6
39146 Author: Aubrey Li <aubrey.adi@gmail.com>
39147 Date: Thu Apr 5 18:29:55 2007 +0800
39149 [Blackfin][PATCH] call real the system synchronize instruction
39151 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
39152 Author: Aubrey Li <aubrey.adi@gmail.com>
39153 Date: Thu Apr 5 18:29:17 2007 +0800
39155 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
39157 commit dfeeab2cd680df047e68e723b246adf6f33bb556
39158 Author: Aubrey Li <aubrey.adi@gmail.com>
39159 Date: Thu Apr 5 18:28:34 2007 +0800
39161 [Blackfin][PATCH]: fix flash unaligned copy issue
39163 commit 443feb740584e406efa203af909fe2926608e8d5
39164 Author: Igor Marnat <marny@rambler.ru>
39165 Date: Wed Mar 21 09:55:01 2007 +0300
39167 Update usage of 'nc' in README.NetConsole
39169 Added information about usage of NetConsole on systems where the -l and -p
39170 switches are mutually exclusive.
39172 Signed-off-by: Igor Marnat <marny@rambler.ru>
39173 Signed-off-by: Ben Warren <bwarren@qstreams.com>
39175 commit 31c98a88228021b314c89ebb8104fb6473da4471
39176 Author: Wolfgang Denk <wd@denx.de>
39177 Date: Wed Apr 4 02:09:30 2007 +0200
39179 Minor coding style cleanup.
39181 commit 94abd7c0583ebe01e799b25f451201deeaab550d
39182 Author: Wolfgang Denk <wd@denx.de>
39183 Date: Wed Apr 4 01:49:15 2007 +0200
39187 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
39188 Author: Rodolfo Giometti <giometti@enneenne.com>
39189 Date: Tue Apr 3 14:27:18 2007 +0200
39191 Support for the Philips ISP116x HCD (Host Controller Driver)
39193 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
39195 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
39196 Author: Markus Klotzbuecher <mk@denx.de>
39197 Date: Tue Apr 3 14:27:08 2007 +0200
39199 USB: cleanup monahans usb support. Remove dead code.
39201 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
39203 commit a65c5768e5537530bd1780af3d3fddc3113a163c
39204 Author: Stefan Roese <sr@denx.de>
39205 Date: Mon Apr 2 10:09:30 2007 +0200
39207 ppc4xx: Change SysACE address on Katmai
39209 With this new base address of the Xilinx SystemACE controller
39210 the Linux driver will be easier to adapt, since it can now be
39211 mapped via the "normal" ioremap() call.
39213 Signed-off-by: Stefan Roese <sr@denx.de>
39215 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
39216 Author: Gerald Van Baren <vanbaren@cideas.com>
39217 Date: Sat Mar 31 14:30:53 2007 -0400
39219 Fix some minor whitespace violations.
39221 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
39222 Author: Gerald Van Baren <vanbaren@cideas.com>
39223 Date: Sat Mar 31 12:23:51 2007 -0400
39225 Add a flattened device tree (fdt) command (2 of 2)
39227 Modifications to the existing code to support the new fdt command.
39229 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
39230 Author: Gerald Van Baren <vanbaren@cideas.com>
39231 Date: Sat Mar 31 12:22:10 2007 -0400
39233 Add a flattened device tree (fdt) command (1 of 2)
39235 The fdt command uses David Gibson's libfdt library to manipulate as well
39236 as print the flattened device tree. This patch is the new command,
39237 the second part is the modifications to the existing code.
39239 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
39240 Author: Gerald Van Baren <vanbaren@cideas.com>
39241 Date: Sat Mar 31 12:13:43 2007 -0400
39243 libfdt: Enhanced and published fdt_next_tag()
39245 Enhanced the formerly private function _fdt_next_tag() to allow stepping
39246 through the tree, used to produce a human-readable dump, and made
39247 it part of the published interface.
39248 Also added some comments.
39250 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
39251 Author: Gerald Van Baren <vanbaren@cideas.com>
39252 Date: Sat Mar 31 12:05:39 2007 -0400
39254 libfdt: Customizations for use by u-boot.
39256 Changes to David Gibson's original source to fit into u-boot's
39257 environment. No functionality changes.
39259 commit 35748177c64a4a83a00057e93bb33e40278a2a96
39260 Author: Gerald Van Baren <vanbaren@cideas.com>
39261 Date: Sat Mar 31 12:00:56 2007 -0400
39263 libfdt: Import libfdt source (2 of 2)
39265 This adds the applicable libfdt source files (unmodified) and a README
39266 to explain where the source came from.
39268 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
39269 Author: Gerald Van Baren <vanbaren@cideas.com>
39270 Date: Sat Mar 31 11:59:59 2007 -0400
39272 libfdt: Import libfdt source (1 of 2)
39274 This adds the applicable libfdt source files (unmodified) and a README
39275 to explain where the source came from.
39277 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
39278 Author: Stefan Roese <sr@denx.de>
39279 Date: Sat Mar 31 13:16:23 2007 +0200
39281 ppc4xx: Update Katmai bootstrap command
39283 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
39286 Signed-off-by: Stefan Roese <sr@denx.de>
39288 commit cabee756a6532986729477c3cc1ea16ef8517ad2
39289 Author: Stefan Roese <sr@denx.de>
39290 Date: Sat Mar 31 13:15:06 2007 +0200
39292 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
39294 Additional RAM information is now printed upon powerup, like
39295 DDR2 frequency and CAS latency.
39297 Signed-off-by: Stefan Roese <sr@denx.de>
39299 commit 60723803431ac75cad085690789e433d5ab9174e
39300 Author: Stefan Roese <sr@denx.de>
39301 Date: Sat Mar 31 08:48:36 2007 +0200
39303 ppc4xx: Change Yucca config file to support ECC
39305 With the updated 44x DDR2 driver the Yucca board now supports
39306 ECC generation and checking.
39308 Signed-off-by: Stefan Roese <sr@denx.de>
39310 commit 490e5730c674b20d708b783a2c5ffd7208f83873
39311 Author: Stefan Roese <sr@denx.de>
39312 Date: Sat Mar 31 08:47:34 2007 +0200
39314 ppc4xx: Fix "bootstrap" command for Katmai board
39316 The board specific "bootstrap" command is now fixed and can
39317 be used for the AMCC Katmai board to configure different
39318 CPU/PLB/OPB frequencies.
39320 Signed-off-by: Stefan Roese <sr@denx.de>
39322 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
39323 Author: Stefan Roese <sr@denx.de>
39324 Date: Sat Mar 31 08:46:08 2007 +0200
39326 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
39328 Fix a bug in the auto calibration routine. This driver now runs
39329 more reliable with the tested modules. It's also tested with
39330 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
39332 Signed-off-by: Stefan Roese <sr@denx.de>
39334 commit 342cd097be1e7affe82f42ab3da220959a699e64
39335 Author: Michal Simek <monstr@monstr.eu>
39336 Date: Fri Mar 30 22:52:09 2007 +0200
39338 [PATCH] Clean include dependence
39340 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
39341 Author: Michal Simek <monstr@monstr.eu>
39342 Date: Fri Mar 30 22:42:45 2007 +0200
39344 [CLEAN] Remove inefficient Suzaku code
39346 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
39347 Author: Stefan Roese <sr@denx.de>
39348 Date: Wed Mar 28 15:03:16 2007 +0200
39350 Merge some AMCC make targets to keep the top-level Makefile smaller
39352 Signed-off-by: Stefan Roese <sr@denx.de>
39354 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
39355 Author: Stefan Roese <sr@denx.de>
39356 Date: Wed Mar 28 14:52:12 2007 +0200
39358 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
39360 The "old" i2c commands (iprobe, imd...) are now compiled in again,
39361 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
39364 Signed-off-by: Stefan Roese <sr@denx.de>
39366 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
39367 Author: Michal Simek <monstr@monstr.eu>
39368 Date: Tue Mar 27 00:32:16 2007 +0200
39370 PATCH: Resolve GPL license problem
39372 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
39373 Author: Rodolfo Giometti <giometti@enneenne.com>
39374 Date: Mon Mar 26 12:03:36 2007 +0200
39376 PXA: pxa27x USB OHCI support
39378 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
39380 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
39381 Author: Markus Klotzbuecher <mk@denx.de>
39382 Date: Mon Mar 26 11:21:05 2007 +0200
39384 USB: remove the S3C24X0_merge #define, which was introduced while
39385 merging OHCI drivers.
39387 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
39389 commit 1798049522f594013aea29457d46794298c6ae15
39390 Author: Michal Simek <root@monstr.eu>
39391 Date: Mon Mar 26 01:39:07 2007 +0200
39393 Support for XUPV2P board
39395 BSP autoconfig support
39397 commit 0d974d5297349504a2ddfa09314be573b5df320a
39398 Author: Stefan Roese <sr@denx.de>
39399 Date: Sat Mar 24 15:57:09 2007 +0100
39401 [PATCH] Add 4xx GPIO functions
39403 This patch adds some 4xx GPIO functions. It also moves some of the
39404 common code and defines into a common 4xx GPIO header file.
39406 Signed-off-by: Stefan Roese <sr@denx.de>
39408 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
39409 Author: Stefan Roese <sr@denx.de>
39410 Date: Sat Mar 24 15:55:58 2007 +0100
39412 [PATCH] Small Sequoia cleanup
39414 Signed-off-by: Stefan Roese <sr@denx.de>
39416 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
39417 Author: Stefan Roese <sr@denx.de>
39418 Date: Sat Mar 24 15:45:34 2007 +0100
39420 [PATCH] Clean up 40EZ/Acadia support
39422 This patch cleans up all the open issue of the preliminary
39425 Signed-off-by: Stefan Roese <sr@denx.de>
39427 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
39428 Author: Jon Loeliger <jdl@freescale.com>
39429 Date: Tue Dec 12 11:02:20 2006 -0600
39431 Fix 8641HPCN problem with ld version 2.16
39433 (Dot outside sections problem).
39435 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
39437 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39439 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
39440 Author: Haiying Wang <haiying.wang@freescale.com>
39441 Date: Thu Dec 7 10:35:55 2006 -0600
39443 Set Rev 2.x 86xx PIC in mixed mode.
39445 Prevent false interrupt from hanging Linux as MSR[EE] is set
39446 to enable interrupts by changing the PIC out of the default
39447 pass through mode into mixed mode.
39449 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
39450 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39452 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
39453 Author: Jason Jin <jason.jin@freescale.com>
39454 Date: Thu Dec 7 10:32:35 2006 -0600
39456 Add flash cmd function to 8641HPCN ramboot
39458 Also fixes some commmand for 8641 HPCN ramboot case.
39460 Signed-off-by: Jason Jin <jason.jin@freescale.com>
39461 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39463 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
39464 Author: Ed Swarthout <ed.swarthout@freescale.com>
39465 Date: Thu Dec 7 10:34:14 2006 -0600
39467 Add support for 8641 Rev 2 silicon.
39469 Without this patch, I am unable to get to the prompt on rev 2 silicon.
39470 Only set ddrioovcr for rev1.
39472 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
39473 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39475 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
39476 Author: Wolfgang Denk <wd@denx.de>
39477 Date: Thu Mar 22 00:13:12 2007 +0100
39479 Code cleanup / re-insert previous Copyright entries.
39481 Signed-off-by: Wolfgang Denk <wd@denx.de>
39483 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
39484 Author: Wolfgang Denk <wd@denx.de>
39485 Date: Wed Mar 21 23:26:15 2007 +0100
39487 Code cleanup. Update CHANGELOG
39489 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
39490 Author: Stefan Roese <sr@denx.de>
39491 Date: Wed Mar 21 14:54:29 2007 +0100
39493 ppc4xx: Fix file mode of include/configs/acadia.h
39495 Signed-off-by: Stefan Roese <sr@denx.de>
39497 commit d5f4614c9350d9333e575100fb250aab774d0258
39498 Author: Markus Klotzbuecher <mk@denx.de>
39499 Date: Wed Mar 21 14:41:46 2007 +0100
39501 SPC1920: fix small clock routing bug
39503 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
39505 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
39506 Author: Stefan Roese <sr@denx.de>
39507 Date: Wed Mar 21 13:39:57 2007 +0100
39509 [PATCH] Add AMCC Acadia (405EZ) eval board support
39511 This patch adds support for the new AMCC Acadia eval board.
39513 Please note that this Acadia/405EZ support is still in a beta stage.
39514 Still lot's of cleanup needed but we need a preliminary release now.
39516 Signed-off-by: Stefan Roese <sr@denx.de>
39518 commit e01bd218b00af73499331a1a701625a852cd286f
39519 Author: Stefan Roese <sr@denx.de>
39520 Date: Wed Mar 21 13:38:59 2007 +0100
39522 [PATCH] Add AMCC PPC405EZ support
39524 This patch adds support for the new AMCC 405EZ PPC. It is in
39525 preparation for the AMCC Acadia board support.
39527 Please note that this Acadia/405EZ support is still in a beta stage.
39528 Still lot's of cleanup needed but we need a preliminary release now.
39530 Signed-off-by: Stefan Roese <sr@denx.de>
39532 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
39533 Author: Heiko Schocher <hs@pollux.denx.de>
39534 Date: Wed Mar 21 08:45:17 2007 +0100
39536 [PATCH] TQM8272: dont change the bits given from the HRCW
39537 for the SIUMCR and BCR Register.
39538 Fix the calculation for the EEprom Size
39540 Signed-off-by: Heiko Schocher <hs@denx.de>
39542 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
39543 Author: Aubrey Li <aubrey.adi@gmail.com>
39544 Date: Tue Mar 20 18:16:24 2007 +0800
39546 [Blackfin][PATCH] Add BF561 EZKIT board support
39548 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
39549 Author: Aubrey Li <aubrey.adi@gmail.com>
39550 Date: Mon Mar 19 22:55:58 2007 +0800
39552 [Blackfin][PATCH] minor cleanup
39554 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
39555 Author: Wolfgang Denk <wd@denx.de>
39556 Date: Mon Mar 19 13:10:08 2007 +0100
39558 Remove obsoleted POST files.
39560 Signed-off-by: Wolfgang Denk <wd@denx.de>
39562 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
39563 Author: Aubrey Li <aubrey.adi@gmail.com>
39564 Date: Mon Mar 19 01:26:11 2007 +0800
39566 [PATCH] Add flash chip M29W320ET/B support
39568 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
39569 Author: Aubrey Li <aubrey.adi@gmail.com>
39570 Date: Mon Mar 19 01:24:52 2007 +0800
39572 [Blackfin][PATCH] Add BF537 stamp board support
39574 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
39575 Author: Stefan Roese <sr@denx.de>
39576 Date: Fri Mar 16 21:11:42 2007 +0100
39578 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
39580 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
39581 DDR memory are dynamically programmed matching the total size
39582 of the equipped memory (DIMM modules).
39584 Signed-off-by: Stefan Roese <sr@denx.de>
39586 commit 76d1466f918b881cda2d259254761e73885093c2
39587 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39588 Date: Tue Mar 13 13:38:05 2007 +0100
39590 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
39591 boards in terms of unification.
39593 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39595 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
39596 Author: Wolfgang Denk <wd@denx.de>
39597 Date: Tue Mar 13 16:05:55 2007 +0100
39599 Make SC3 board build with 'make O='; use 'addcons' consistently
39600 (SC3 and Jupiter used to use 'addcon' instead).
39602 Signed-off-by: Wolfgang Denk wd@denx.de
39604 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
39605 Author: Heiko Schocher <hs@pollux.denx.de>
39606 Date: Tue Mar 13 09:40:59 2007 +0100
39608 [PATCH] update board config for jupiter Board:
39610 CONFIG_CMDLINE_EDITING,
39611 CFG_ENV_ADDR_REDUND activated
39613 Signed-off-by: Heiko Schocher <hs@denx.de>
39615 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
39616 Author: Aubrey Li <aubrey.adi@gmail.com>
39617 Date: Mon Mar 12 12:11:55 2007 +0800
39619 [Blackfin][PATCH] minor cleanup
39621 commit bfa5754a58477ac917d21527cd0f079d87cf188e
39622 Author: Aubrey Li <aubrey.adi@gmail.com>
39623 Date: Mon Mar 12 01:42:06 2007 +0800
39625 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
39627 commit 8440bb14581a294375c34b91b42512f9753d1130
39628 Author: Aubrey Li <aubrey.adi@gmail.com>
39629 Date: Mon Mar 12 00:25:14 2007 +0800
39631 [Blackfin][PATCH] code cleanup
39633 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
39634 Author: Michal Simek <monstr@monstr.eu>
39635 Date: Sun Mar 11 13:48:24 2007 +0100
39637 [Microblaze][PATCH] part 2
39639 interrupt controller support
39643 board information support
39645 booting image support
39647 adding support for Xilinx ML401
39649 commit 76316a318de91f6184e7c22a10e02d275ade2441
39650 Author: Michal Simek <monstr@monstr.eu>
39651 Date: Sun Mar 11 13:42:58 2007 +0100
39653 [Microblaze][PATCH]
39655 interrupt controller support
39659 board information support
39661 booting image support
39663 adding support for Xilinx ML401
39665 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
39666 Author: Aubrey Li <aubrey.adi@gmail.com>
39667 Date: Sat Mar 10 23:49:29 2007 +0800
39669 [Blackfin][PATCH] code cleanup
39671 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
39672 Author: Aubrey.Li <aubrey.adi@gmail.com>
39673 Date: Fri Mar 9 13:40:56 2007 +0800
39675 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
39677 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
39678 Author: Aubrey.Li <aubrey.adi@gmail.com>
39679 Date: Fri Mar 9 13:38:44 2007 +0800
39681 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
39683 commit 992423ab43c2bcf6b704853bd00af77450915e20
39684 Author: Stefan Roese <sr@denx.de>
39685 Date: Thu Mar 8 23:00:08 2007 +0100
39687 ppc4xx: Fix file mode of sequoia.c
39689 Signed-off-by: Stefan Roese <sr@denx.de>
39691 commit eb92f613556800f7483666db09d9a237ad911d4a
39692 Author: Wolfgang Denk <wd@pollux.denx.de>
39693 Date: Thu Mar 8 22:52:51 2007 +0100
39697 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
39698 Author: John Otken john@softadvances.com <john@softadvances.com>
39699 Date: Thu Mar 8 09:39:48 2007 -0600
39701 ppc4xx: Clear Sequoia/Rainier security engine reset bits
39703 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
39705 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
39706 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39707 Date: Thu Mar 8 16:26:52 2007 +0100
39709 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
39711 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39713 commit d9fc703246840c4b268debf48c334ba55c597dc0
39714 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39715 Date: Thu Mar 8 16:25:47 2007 +0100
39717 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
39719 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39721 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
39722 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39723 Date: Thu Mar 8 16:23:11 2007 +0100
39725 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
39727 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39729 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
39730 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39731 Date: Thu Mar 8 16:20:32 2007 +0100
39733 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
39735 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39737 commit f9fc6a5852a6335840882fa2111925010eea1abe
39738 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39739 Date: Wed Mar 7 15:32:01 2007 +0100
39741 fixed ethernet phy configuration for plu405 board
39743 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39745 commit 769104c9356594deb2092e204a39c05b33202d6c
39746 Author: Wolfgang Denk <wd@pollux.denx.de>
39747 Date: Thu Mar 8 21:49:27 2007 +0100
39751 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
39752 Author: Stefan Roese <sr@denx.de>
39753 Date: Thu Mar 8 10:13:16 2007 +0100
39755 [PATCH] Update AMCC Luan 440SP eval board support
39757 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
39758 inititializition. This includes DDR auto calibration and support
39759 for different DIMM modules, instead of the fixed setup used in
39760 the earlier version.
39762 This patch also enables the cache in FLASH for the startup
39763 phase of U-Boot (while running from FLASH). After relocating to
39764 SDRAM the cache is disabled again. This will speed up the boot
39765 process, especially the SDRAM setup, since there are some loops
39766 for memory testing (auto calibration).
39768 Signed-off-by: Stefan Roese <sr@denx.de>
39770 commit 2f5df47351910a2936c7741cf111855829200943
39771 Author: Stefan Roese <sr@denx.de>
39772 Date: Thu Mar 8 10:10:18 2007 +0100
39774 [PATCH] Update AMCC Yucca 440SPe eval board support
39776 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
39777 inititializition. This includes DDR auto calibration and support
39778 for different DIMM modules, instead of the fixed setup used in
39779 the earlier version.
39781 Signed-off-by: Stefan Roese <sr@denx.de>
39783 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
39784 Author: Stefan Roese <sr@denx.de>
39785 Date: Thu Mar 8 10:07:18 2007 +0100
39787 ppc4xx: Small AMCC Katmai 440SPe update
39789 Signed-off-by: Stefan Roese <sr@denx.de>
39791 commit df294497479b1dca6dd86318b2a912f72fede0df
39792 Author: Stefan Roese <sr@denx.de>
39793 Date: Thu Mar 8 10:06:09 2007 +0100
39795 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
39797 Signed-off-by: Stefan Roese <sr@denx.de>
39799 commit 83853178bd36bca6f0f8f1331476620c84a587fc
39800 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39801 Date: Wed Mar 7 12:14:50 2007 -0600
39803 net - Support ping reply when processing net-loop
39805 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
39807 This permits the ping command to test the phy interface when the phy
39808 is put in loopback mode (typically by setting register 0 bit 14).
39810 It also allows the port to respond to an external ping when u-boot is
39811 processing some other net command (such as tftp). This is useful when
39812 tftp appears to hang.
39814 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39815 Signed-off-by: Ben Warren <bwarren@qstreams.com>
39817 commit fa1aef15bcd47736687be1af544506e90fba545d
39818 Author: Stefan Roese <sr@denx.de>
39819 Date: Wed Mar 7 16:43:00 2007 +0100
39821 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
39823 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
39824 DDR memory are dynamically programmed matching the total size
39825 of the equipped memory (DIMM modules).
39827 Signed-off-by: Stefan Roese <sr@denx.de>
39829 commit e2ebe696818939e2b974628be9c921ea3fe9de13
39830 Author: Stefan Roese <sr@denx.de>
39831 Date: Wed Mar 7 16:39:36 2007 +0100
39833 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
39835 This patch fixes a problem that occurs when 2 DIMM's are
39836 used. This problem was first spotted and fixed by Gerald Jackson
39837 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
39838 problem in a little more clever way.
39840 This patch also adds the nice functionality to dynamically
39841 create the TLB entries for the SDRAM (tlb.c). So we should
39842 never run into such problems with wrong (too short) TLB
39843 initialization again on these platforms.
39845 As this feature is new to the "old" 44x SPD DDR driver, it
39846 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
39848 Signed-off-by: Stefan Roese <sr@denx.de>
39850 commit 39218433983417b9df087976a79e3f80dd5e83d6
39851 Author: Wolfgang Denk <wd@denx.de>
39852 Date: Wed Mar 7 16:33:44 2007 +0100
39854 UC101: fix compiler warnings
39856 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
39857 Author: Wolfgang Denk <wd@pollux.denx.de>
39858 Date: Wed Mar 7 16:19:46 2007 +0100
39860 HMI1001: fix build error, cleanup compiler warnings.
39862 commit ad5bb451ade552c44bef9119d907929ebc2c126f
39863 Author: Wolfgang Denk <wd@pollux.denx.de>
39864 Date: Tue Mar 6 18:08:43 2007 +0100
39866 Restructure POST directory to support of other CPUs, boards, etc.
39868 commit a5284efd125967675b2e9c6ef7b95832268ad360
39869 Author: Wolfgang Denk <wd@pollux.denx.de>
39870 Date: Tue Mar 6 18:01:47 2007 +0100
39872 Fix HOSTARCH handling.
39873 Patch by Mike Frysinger, Mar 05 2007
39875 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
39876 Author: Stefan Roese <sr@denx.de>
39877 Date: Tue Mar 6 07:47:04 2007 +0100
39879 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
39881 As provided by the AMCC applications team, this patch optimizes the
39882 DDR2 setup for 166MHz bus speed. The values provided are also save
39883 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
39884 setup has to be adjusted as done in this patch.
39886 For this the NAND booting version had to include the "speed.c" file
39887 from the cpu/ppc4xx directory. With this addition the NAND SPL image
39888 will just fit into the 4kbytes of program space. gcc version 4.x as
39889 provided with ELDK 4.x is needed to generate this optimized code.
39891 Signed-off-by: Stefan Roese <sr@denx.de>
39893 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
39894 Author: Wolfgang Denk <wd@pollux.denx.de>
39895 Date: Sun Mar 4 01:36:05 2007 +0100
39899 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
39900 Author: Kim Phillips <kim.phillips@freescale.com>
39901 Date: Wed Feb 28 00:02:04 2007 -0600
39903 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
39905 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
39907 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
39908 Author: Kumar Gala <galak@kernel.crashing.org>
39909 Date: Tue Feb 27 23:51:42 2007 -0600
39911 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
39913 The config value for:
39921 Were not being used when setting the appropriate register
39924 * CFG_SCCR_USBMPHCM
39929 To allow full config of the SCCR.
39931 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
39932 that were just bogus.
39934 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39936 commit d51b3cf371cd441030460ef19d36b2924c361b1a
39937 Author: Kim Phillips <kim.phillips@freescale.com>
39938 Date: Thu Feb 22 20:06:57 2007 -0600
39940 mpc83xx: update [local-]mac-address properties on UEC based devices
39942 8360 and 832x weren't updating their [local-]mac-address
39943 properties. This patch fixes that.
39945 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39947 commit 61f4f912acbe60776c5e00df1ec94094ce672957
39948 Author: Timur Tabi <timur@freescale.com>
39949 Date: Tue Feb 13 10:41:42 2007 -0600
39951 mpc83xx: write MAC address to mac-address and local-mac-address
39953 Some device trees have a mac-address property, some have local-mac-address,
39954 and some have both. To support all of these device trees, this patch
39955 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
39956 This function already updates local-mac-address.
39958 Signed-off-by: Timur Tabi <timur@freescale.com>
39960 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
39961 Author: Kim Phillips <kim.phillips@freescale.com>
39962 Date: Tue Feb 27 18:41:08 2007 -0600
39964 mpc83xx: add command line editing by default
39966 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
39967 Author: Kim Phillips <kim.phillips@freescale.com>
39968 Date: Wed Feb 14 19:50:53 2007 -0600
39970 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
39972 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
39973 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
39975 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
39977 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39978 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
39980 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
39981 Author: Xie Xiaobo <r63061@freescale.com>
39982 Date: Wed Feb 14 18:27:17 2007 +0800
39984 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
39986 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
39987 it pass DDR/DDR2 compliance tests.
39989 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
39991 commit b110f40bd180c6b560276589beedf753e97c46ce
39992 Author: Xie Xiaobo <r63061@freescale.com>
39993 Date: Wed Feb 14 18:27:06 2007 +0800
39995 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
39997 MPC8360E rev2.0 have new spridr,and PVR value,
39998 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
40000 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
40002 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
40003 Author: Xie Xiaobo <r63061@freescale.com>
40004 Date: Wed Feb 14 18:26:44 2007 +0800
40006 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
40008 MPC8349E rev3.1 have new spridr,and PVR value,
40009 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
40011 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
40013 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
40014 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
40015 Date: Wed Jan 31 11:04:19 2007 +0100
40017 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
40019 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
40020 which is used to se if an slave will ACK after receiving its address.
40022 Correct i2c probing to use this method as the old method could upset
40023 a slave as it wrote a data byte to it.
40025 Add a small delay in i2c_init() to let the controller
40026 shutdown any ongoing I2C activity.
40028 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
40030 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
40031 Author: Timur Tabi <timur@freescale.com>
40032 Date: Wed Jan 31 15:54:29 2007 -0600
40034 mpc83xx: Add support for the MPC8349E-mITX-GP
40036 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
40037 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
40038 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
40040 Signed-off-by: Timur Tabi <timur@freescale.com>
40042 commit fab16807adad350f618024350c6950165c247c72
40043 Author: Timur Tabi <timur@freescale.com>
40044 Date: Wed Jan 31 15:54:20 2007 -0600
40046 mpc83xx: Delete sdram_init() for MPC8349E-mITX
40048 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
40049 never does anything. This patch deletes it.
40051 Signed-off-by: Timur Tabi <timur@freescale.com>
40053 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
40054 Author: Dave Liu <daveliu@freescale.com>
40055 Date: Fri Jan 19 10:43:26 2007 +0800
40057 mpc83xx: Fix the LAW1/3 bug
40059 The patch solves the alignment problem of the local bus access windows to
40060 render accessible the memory bank and PHY registers of UPC 1 (starting at
40061 0xf801 0000). What we actually did was to adjust the sizes of the bus
40062 access windows so that the base address alignment requirement would be met.
40064 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
40065 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
40066 Signed-off-by: Dave Liu <daveliu@freescale.com>
40068 commit 97c4b397dce236a7318b304667bf89e59d08b17c
40069 Author: Kim Phillips <kim.phillips@freescale.com>
40070 Date: Tue Jan 30 16:15:31 2007 -0600
40072 mpc83xx: don't hang if watchdog configured on 8360, 832x
40074 don't hang if watchdog configured on 8360, 832x
40076 The watchdog programming model is the same across all 83xx devices;
40077 make the code reflect that.
40079 commit b70047478570e371ce7223be342ce98afea0f7d6
40080 Author: Kim Phillips <kim.phillips@freescale.com>
40081 Date: Tue Jan 30 16:15:21 2007 -0600
40083 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
40085 protect memcpy to bad address if a local-mac-address is missing from dt
40087 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
40088 Author: Kim Phillips <kim.phillips@freescale.com>
40089 Date: Tue Jan 30 16:15:04 2007 -0600
40091 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
40093 make 8360 default environment fdt be 8360 (not 8349)
40095 commit a28899c910024a0226331df07207b1038c300c93
40096 Author: Emilian Medve <Emilian.Medve@freescale.com>
40097 Date: Tue Jan 30 16:14:50 2007 -0600
40099 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
40101 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
40102 be used for busy-waiting since it strips the 'volatile' property from
40103 the bd variable. gcc3 was working by pure luck.
40105 This is a follow on patch to "Fix the UEC driver bug of QE"
40107 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
40108 Author: Kumar Gala <galak@kernel.crashing.org>
40109 Date: Tue Jan 30 14:08:30 2007 -0600
40111 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
40113 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
40114 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
40115 CONFIG_MPC834X so they are more generic.
40117 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40119 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
40120 Author: Kim Phillips <kim.phillips@freescale.com>
40121 Date: Thu Jan 25 13:40:55 2007 -0600
40123 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
40125 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
40126 Author: Kim Phillips <kim.phillips@freescale.com>
40127 Date: Wed Jan 24 17:18:37 2007 -0600
40129 mpc83xx: sort Makefile targets
40131 reordered targets alphabetically
40133 commit 91e25769771c1164ed63ffca0add49f934ae3343
40134 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
40135 Date: Tue Jan 16 11:38:14 2007 -0500
40137 mpc83xx: U-Boot support for Wind River SBC8349
40139 I've redone the SBC8349 support to match git-current, which
40140 incorporates all the MPC834x updates from Freescale since the 1.1.6
40141 release, including the DDR changes.
40143 I've kept all the SBC8349 files as parallel as possible to the
40144 MPC8349EMDS ones for ease of maintenance and to allow for easy
40145 inspection of what was changed to support this board. Hence the SBC8349
40146 U-Boot has FDT support and everything else that the MPC8349EMDS has.
40148 Fortunately the Freescale updates added support for boards using CS0,
40149 but I had to change spd_sdram.c to allow for board specific settings for
40150 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
40151 default if the board doesn't specify a value.)
40153 Hopefully this should be mergeable as-is and require no whitespace
40154 cleanups or similar, but if something doesn't measure up then let me
40155 know and I'll fix it.
40160 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
40161 Author: Sam Song <samsongshu@yahoo.com.cn>
40162 Date: Thu Dec 14 19:03:21 2006 +0800
40164 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
40166 A redundant semicolon existed in mpc8349itx.c
40169 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
40171 commit f35f358241c549be3f75cfe2eaa642914275b7ba
40172 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
40173 Date: Wed Dec 6 21:23:55 2006 -0500
40175 mpc83xx: Put the version (and magic) after the HRCW.
40177 Put the version (and magic) after the HRCW. This puts it in a fixed
40178 location in flash, not at the start of flash but as close as we can get.
40180 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
40182 commit 48aecd969171a6e99a55fae04933857787f9a5bd
40183 Author: Dave Liu <r63238@freescale.com>
40184 Date: Thu Dec 7 21:14:51 2006 +0800
40186 mpc83xx: Add the MPC832XEMDS board readme
40188 Add the MPC832XEMDS board readme
40190 Signed-off-by: Dave Liu <daveliu@freescale.com>
40192 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
40193 Author: Dave Liu <r63238@freescale.com>
40194 Date: Thu Dec 7 21:13:15 2006 +0800
40196 mpc83xx: Add support for the MPC832XEMDS board
40198 This patch supports DUART, ETH3/4 and PCI etc.
40200 Signed-off-by: Dave Liu <daveliu@freescale.com>
40202 commit e080313c32322e15ab5a18eb896a252858c57284
40203 Author: Dave Liu <r63238@freescale.com>
40204 Date: Thu Dec 7 21:11:58 2006 +0800
40206 mpc83xx: streamline the 83xx immr head file
40208 For better format and style, I streamlined the 83xx head files,
40209 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
40210 duplicated macro definition appear in the both files; 2) the structure
40211 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
40212 macro definition put inside the each structure. So, I cleaned up the
40213 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
40214 moved the macro definition to mpc83xx.h, Just like MPC8260.
40218 *streamline the 83xx immr head file
40220 Signed-off-by: Dave Liu <daveliu@freescale.com>
40222 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
40223 Author: Dave Liu <r63238@freescale.com>
40224 Date: Wed Dec 6 11:38:17 2006 +0800
40226 mpc83xx: Fix the UEC driver bug of QE
40228 The patch prevents the GCC tool chain from striping useful code for
40229 optimization. It will make UEC ethernet driver workable, Otherwise the
40230 UEC will fail in tx when you are using gcc4.x. but the driver can work
40231 when using gcc3.4.3.
40235 *Prevent the GCC from striping code for optimization, Otherwise the UEC
40236 will tx failed when you are using gcc4.x.
40238 Signed-off-by: Dave Liu <daveliu@freescale.com>
40240 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
40241 Author: Stefan Roese <sr@denx.de>
40242 Date: Thu Mar 1 21:11:36 2007 +0100
40244 [PATCH] Update AMCC Katmai 440SPe eval board support
40246 This patch updates the recently added Katmai board support. The biggest
40247 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
40250 Please note, that still some problems are left with some memory
40251 configurations. See the driver for more details.
40253 Signed-off-by: Stefan Roese <sr@denx.de>
40255 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
40256 Author: Stefan Roese <sr@denx.de>
40257 Date: Thu Mar 1 07:03:25 2007 +0100
40259 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
40261 Signed-off-by: Stefan Roese <sr@denx.de>
40263 commit ccbc7036648e465697ca298ba51e0e76dda352a0
40264 Author: Wolfgang Denk <wd@pollux.denx.de>
40265 Date: Wed Feb 28 01:28:53 2007 +0100
40267 SC3: fix typo in default environment
40269 commit e344568b1b46af85ec32d815586f91bc115d6223
40270 Author: Sergei Poselenov <sposelenov@emcraft.com>
40271 Date: Tue Feb 27 20:15:30 2007 +0300
40273 MCC200: Fixes for update procedure
40275 - fix logic error in image type handling
40276 - make sure file system images (cramfs etc.) get stored in flash
40277 with image header stripped so they can be mounted through MTD
40279 commit 743571145b37182757d4e688a77860b36ee77573
40280 Author: Wolfgang Denk <wd@pollux.denx.de>
40281 Date: Tue Feb 27 14:26:04 2007 +0100
40283 Minor code cleanup.
40285 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
40286 Author: Sergei Poselenov <sposelenov@emcraft.com>
40287 Date: Tue Feb 27 12:40:16 2007 +0300
40289 MCC200 update - add LCD Progress Indicator
40291 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
40292 Author: Stefan Roese <sr@denx.de>
40293 Date: Thu Feb 22 07:43:34 2007 +0100
40295 [PATCH] get_dev() now unconditionally uses manual relocation
40297 Since the relocation fix is not included yet and we're not sure how
40298 it will be added, this patch removes code that required relocation
40299 to be fixed for now.
40301 Signed-off-by: Stefan Roese <sr@denx.de>
40303 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
40304 Author: Stefan Roese <sr@denx.de>
40305 Date: Thu Feb 22 07:40:23 2007 +0100
40307 [PATCH] Change systemace driver to select 8 & 16bit mode
40309 As suggested by Grant Likely this patch enables the Xilinx SystemACE
40310 driver to select 8 or 16bit mode upon startup.
40312 Signed-off-by: Stefan Roese <sr@denx.de>
40314 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
40315 Author: Haiying Wang <Haiying.Wang@freescale.com>
40316 Date: Wed Feb 21 16:52:31 2007 +0100
40318 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
40320 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
40321 is fully finished. The sync() is defined in each CPU's io.h file. For
40322 those CPUs which do not need sync for now, a dummy sync() is defined in
40323 their io.h as well.
40325 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
40327 commit da04995c7dc6772013a9a0dc5c767f190c402478
40328 Author: Stefan Roese <sr@denx.de>
40329 Date: Wed Feb 21 13:44:34 2007 +0100
40331 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
40333 Signed-off-by: Stefan Roese <sr@denx.de>
40335 commit 751bb57107d78978ae08e697c3deba816f5be091
40336 Author: Stefan Roese <sr@denx.de>
40337 Date: Tue Feb 20 13:21:57 2007 +0100
40339 [PATCH] Fix relocation problem with "new" get_dev() function
40341 This patch enables the "new" get_dev() function for block devices
40342 introduced by Grant Likely to be used on systems that still suffer
40343 from the relocation problems (manual relocation neede because of
40344 problems with linker script).
40346 Hopefully we can resolve this relocation issue soon for all platform
40347 so we don't need this additional code anymore.
40349 Signed-off-by: Stefan Roese <sr@denx.de>
40351 commit d93e2212f962668b3dce091ff5edc33f2347fe37
40352 Author: Stefan Roese <sr@denx.de>
40353 Date: Tue Feb 20 13:17:42 2007 +0100
40355 [PATCH] Update SystemACE driver for 16bit access
40357 This patch removes some problems when the Xilinx SystemACE driver
40358 is used with 16bit access on an big endian platform (like the
40361 Signed-off-by: Stefan Roese <sr@denx.de>
40363 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
40364 Author: Stefan Roese <sr@denx.de>
40365 Date: Tue Feb 20 13:15:40 2007 +0100
40367 [PATCH] Clean up Katmai (440SPe) linker script
40369 Signed-off-by: Stefan Roese <sr@denx.de>
40371 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
40372 Author: Stefan Roese <sr@denx.de>
40373 Date: Tue Feb 20 10:57:08 2007 +0100
40375 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
40377 Signed-off-by: Stefan Roese <sr@denx.de>
40379 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
40380 Author: Stefan Roese <sr@denx.de>
40381 Date: Tue Feb 20 10:51:26 2007 +0100
40383 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
40385 This patch switches to the desired I2C bus when the date/dtt
40386 commands are called. This can be configured using the
40387 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
40389 Signed-off-by: Stefan Roese <sr@denx.de>
40391 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
40392 Author: Stefan Roese <sr@denx.de>
40393 Date: Tue Feb 20 10:43:34 2007 +0100
40395 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
40397 This patch adds support for the DDR2 controller used on the
40398 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
40399 board and works fine with the following DIMM modules:
40401 - Corsair CM2X512-5400C4 (512MByte per DIMM)
40402 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
40403 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
40405 This patch also adds the nice functionality to dynamically
40406 create the TLB entries for the SDRAM (tlb.c). So we should
40407 never run into such problems with wrong (too short) TLB
40408 initialization again on these platforms.
40410 Signed-off-by: Stefan Roese <sr@denx.de>
40412 commit 36d830c9830379045f5daa9f542ac1c990c70068
40413 Author: Stefan Roese <sr@denx.de>
40414 Date: Tue Feb 20 10:35:42 2007 +0100
40416 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
40418 Since the existing 4xx SPD SDRAM initialization routines for the
40419 405 SDRAM controller and the 440 DDR controller don't have much in
40420 common this patch splits both drivers into different files.
40422 This is in preparation for the 440 DDR2 controller support (440SP/e).
40424 Signed-off-by: Stefan Roese <sr@denx.de>
40426 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
40427 Author: Stefan Roese <sr@denx.de>
40428 Date: Tue Feb 20 10:27:08 2007 +0100
40430 [PATCH] PPC4xx: Add support for multiple I2C busses
40432 This patch adds support for multiple I2C busses on the PPC4xx
40433 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
40434 to make use of this feature.
40436 It also merges the 405 and 440 i2c header files into one common
40439 Also the 4xx i2c reset procedure is reworked since I experienced
40440 some problems with the first access on the 440SPe Katmai board.
40442 Signed-off-by: Stefan Roese <sr@denx.de>
40444 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
40445 Author: Grant Likely <grant.likely@secretlab.ca>
40446 Date: Tue Feb 20 09:05:45 2007 +0100
40448 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
40450 Block device read/write is anonymous data; there is no need to use a
40451 typed pointer. void * is fine. Also add a hook for block_read functions
40453 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40455 commit 53758fa20e935cc87eeb0519ed365df753a6f289
40456 Author: Grant Likely <grant.likely@secretlab.ca>
40457 Date: Tue Feb 20 09:05:38 2007 +0100
40459 [PATCH 8_9] Add block_write hook to block_dev_desc_t
40461 Preparation for future patches which support block device writing
40463 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40465 commit f4852ebe6ca946a509667eb68be42026f837be76
40466 Author: Grant Likely <grant.likely@secretlab.ca>
40467 Date: Tue Feb 20 09:05:31 2007 +0100
40469 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
40471 Register read/write does not need to be wrapped in a full function. The
40472 patch replaces them with macros.
40474 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40476 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
40477 Author: Grant Likely <grant.likely@secretlab.ca>
40478 Date: Tue Feb 20 09:05:23 2007 +0100
40480 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
40482 The code in this file is not a command; it is a device driver. Put it in
40483 the correct place. There are zero functional changes in this patch, it
40484 only moves the file.
40486 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40488 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
40489 Author: Grant Likely <grant.likely@secretlab.ca>
40490 Date: Tue Feb 20 09:05:16 2007 +0100
40492 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
40494 This patch is in preparation of additional changes to the sysace driver.
40495 May as well take this opportunity to fixup the inconsistent whitespace since
40496 this file is about to undergo major changes anyway.
40498 There are zero functional changes in this patch. It only cleans up the
40501 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40503 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
40504 Author: Grant Likely <grant.likely@secretlab.ca>
40505 Date: Tue Feb 20 09:05:07 2007 +0100
40507 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
40509 isprint is already defined in ctype.c
40511 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40513 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
40514 Author: Grant Likely <grant.likely@secretlab.ca>
40515 Date: Tue Feb 20 09:05:00 2007 +0100
40517 [PATCH 3_9] Move buffer print code from md command to common function
40519 Printing a buffer is a darn useful thing. Move the buffer print code
40520 into print_buffer() in lib_generic/
40522 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40524 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
40525 Author: Grant Likely <grant.likely@secretlab.ca>
40526 Date: Tue Feb 20 09:04:52 2007 +0100
40528 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
40530 Change the xilinx device drivers and board code to include config.h
40531 instead of xparameters.h directly. config.h always includes the
40532 correct xparameters file. This change reduces the posibility of
40533 including the wrong file when adding a new xilinx board port
40535 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40537 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
40538 Author: Grant Likely <grant.likely@secretlab.ca>
40539 Date: Tue Feb 20 09:04:34 2007 +0100
40541 [PATCH 1_4] Merge common get_dev() routines for block devices
40543 Each of the filesystem drivers duplicate the get_dev routine. This change
40544 merges them into a single function in part.c
40546 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40548 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
40549 Author: Wolfgang Denk <wd@pollux.denx.de>
40550 Date: Mon Feb 19 23:09:51 2007 +0100
40552 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
40553 as root file system images.
40555 commit 489c696ae7211218961d159e43e722d74c36fcbc
40556 Author: Sergei Poselenov <sposelenov@emcraft.com>
40557 Date: Wed Feb 14 14:30:28 2007 +0300
40559 MCC200: Extensions to Software Update Mechanism
40561 Update / extend Software Update Mechanism for MCC200 board:
40563 - Add support for rootfs image added. The environment variables
40564 "rootfs_st" and "rootfs_nd" can be used to override the default
40565 values of the image start and end.
40566 - Remove excessive key check code.
40569 commit 4be23a12f23f1372634edc3215137b09768b7949
40570 Author: Stefan Roese <sr@denx.de>
40571 Date: Mon Feb 19 08:23:15 2007 +0100
40573 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
40575 As spotted by Matthias Fuchs, the READY input should not be
40576 enabled for the NOR FLASH on the Sequoia board.
40578 Signed-off-by: Stefan Roese <sr@denx.de>
40580 commit 2605e90bf676d48123afe5719a846d2b52b24aac
40581 Author: Heiko Schocher <hs@pollux.denx.de>
40582 Date: Fri Feb 16 07:57:42 2007 +0100
40584 [PATCH] Added support for the jupiter board.
40586 Signed-off-by: Heiko Schocher <hs@denx.de>
40588 commit 497d012e5be0194e1084073d0081eb1a844796b2
40589 Author: Gary Jennejohn <garyj@pollux.denx.de>
40590 Date: Mon Feb 12 13:11:50 2007 +0100
40592 LPC2292: patch from Siemens.
40594 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
40595 Author: Stefan Roese <sr@denx.de>
40596 Date: Sat Feb 10 08:49:31 2007 +0100
40598 [PATCH] Add missing p3mx.h file to repository (ups)
40600 Signed-off-by: Stefan Roese <sr@denx.de>
40602 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
40603 Author: Bartlomiej Sieka <tur@semihalf.com>
40604 Date: Fri Feb 9 10:45:42 2007 +0100
40606 [Motion-PRO] Preliminary support for the Motion-PRO board.
40608 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
40609 Author: Stefan Roese <sr@denx.de>
40610 Date: Wed Feb 7 16:51:08 2007 +0100
40612 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
40614 Some boards that can have more than 768MBytes of SDRAM need to
40615 set "initrd_high", so that the initrd can be accessed by the
40618 Signed-off-by: Stefan Roese <sr@denx.de>
40620 commit 7372ca68227930d03cffa548310524cad5b96733
40621 Author: Stefan Roese <sr@denx.de>
40622 Date: Fri Feb 2 12:44:22 2007 +0100
40624 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
40626 Previously the strapping DCR/SDR was read to determine if the internal PCI
40627 arbiter is enabled or not. This strapping bit can be overridden, so now
40628 the current status is read from the correct DCR/SDR register.
40630 Signed-off-by: Stefan Roese <sr@denx.de>
40632 commit 2aa54f651a42d198673318f07a20c89a43e4d197
40633 Author: Stefan Roese <sr@denx.de>
40634 Date: Fri Feb 2 12:42:08 2007 +0100
40636 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
40638 Signed-off-by: Stefan Roese <sr@denx.de>
40640 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
40641 Author: Stefan Roese <sr@denx.de>
40642 Date: Thu Feb 1 13:22:41 2007 +0100
40644 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
40646 When PCI PNP is enabled the pci pnp configuration routine is called
40647 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
40648 problems with some PCI cards. For now disable the PCI PNP configuration.
40650 Signed-off-by: Stefan Roese <sr@denx.de>
40652 commit 2902fadade3be7659467e8d074048c6b7068f5c0
40653 Author: Stefan Roese <sr@denx.de>
40654 Date: Wed Jan 31 16:56:10 2007 +0100
40656 [PATCH] Update 440EPx/440GRx cpu detection
40658 Signed-off-by: Stefan Roese <sr@denx.de>
40660 commit d5ea287b02a6945c3977410e364a879dd1a555c8
40661 Author: Stefan Roese <sr@denx.de>
40662 Date: Wed Jan 31 16:38:04 2007 +0100
40664 [PATCH] Update esd cpci5200 files
40666 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
40668 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
40669 Author: Stefan Roese <sr@denx.de>
40670 Date: Wed Jan 31 16:37:34 2007 +0100
40672 [PATCH] Add support for esd mecp5200 board
40674 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
40676 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
40677 Author: Stefan Roese <sr@denx.de>
40678 Date: Wed Jan 31 12:38:50 2007 +0100
40680 [PATCH] Remove unneccessary yellowstone board config file
40682 Signed-off-by: Stefan Roese <sr@denx.de>
40684 commit e802594b6fa1b166308820c276b96dc0d7cc731c
40685 Author: Stefan Roese <sr@denx.de>
40686 Date: Tue Jan 30 17:06:10 2007 +0100
40688 [PATCH] Update Sequoia (440EPx) config file
40690 The config file now handles the 2nd target, the Rainier (440GRx)
40691 evaluation board better. Additionally the PPC input clock was
40692 adjusted to match the correct value of 33.0 MHz.
40694 Signed-off-by: Stefan Roese <sr@denx.de>
40696 commit 700200c67e73b83751418abe7815840dca8fd6cb
40697 Author: Stefan Roese <sr@denx.de>
40698 Date: Tue Jan 30 17:04:19 2007 +0100
40700 [PATCH] Merge Yosemite & Yellowstone board ports
40702 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
40703 share one config file and all board specific files. This way we
40704 don't have to maintain two different sets of files for nearly
40707 Signed-off-by: Stefan Roese <sr@denx.de>
40709 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
40710 Author: Stefan Roese <sr@denx.de>
40711 Date: Tue Jan 30 15:01:49 2007 +0100
40713 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
40715 SCPU doesn't use redundant environment in flash.
40717 Signed-off-by: Stefan Roese <sr@denx.de>
40719 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
40720 Author: Stefan Roese <sr@denx.de>
40721 Date: Tue Jan 30 12:51:07 2007 +0100
40723 [PATCH] alpr: Update alpr board config file
40725 Signed-off-by: Stefan Roese <sr@denx.de>
40727 commit f8db84f132b1e335f20f96138a1f09ed97b08664
40728 Author: Wolfgang Denk <wd@pollux.denx.de>
40729 Date: Tue Jan 30 00:50:40 2007 +0100
40731 LPC2292 SODIMM port coding style cleanup.
40733 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
40734 Author: Gary Jennejohn <garyj@pollux.denx.de>
40735 Date: Wed Jan 24 12:16:56 2007 +0100
40737 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
40739 commit 2daf046ba627f85f44195815778140039636244e
40740 Author: Bartlomiej Sieka <tur@semihalf.com>
40741 Date: Tue Jan 23 17:22:06 2007 +0100
40743 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
40745 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
40746 Author: Bartlomiej Sieka <tur@semihalf.com>
40747 Date: Tue Jan 23 14:21:14 2007 +0100
40749 [iDMR] Flash driver on initialisation write-protects some sectors,
40750 currently sectors 0-3. Sector 3 does not need to be protected, though
40751 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
40752 fixes this, i.e., only sectors 0-2 are protected.
40754 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
40755 Author: Bartlomiej Sieka <tur@semihalf.com>
40756 Date: Tue Jan 23 14:11:22 2007 +0100
40758 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
40759 "mii device" results in "Unexpected exception"). Fixing this properly
40760 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
40761 this commit disables MII commads for now.
40763 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
40764 Author: Bartlomiej Sieka <tur@semihalf.com>
40765 Date: Tue Jan 23 13:25:22 2007 +0100
40767 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
40768 Identification Register (CIR).
40770 commit fdef388758506765d4d6a7155c8f1584c63ff581
40771 Author: roy zang <tie-fei.zang@freescale.com>
40772 Date: Mon Jan 22 13:19:21 2007 +0800
40774 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
40775 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
40776 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
40779 commit a4012396645533aef218354eeba754dff0deace8
40780 Author: Wolfgang Denk <wd@pollux.denx.de>
40781 Date: Fri Jan 19 23:08:39 2007 +0100
40783 Minor code cleanup.
40785 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
40786 Author: Heiko Schocher <hs@pollux.denx.de>
40787 Date: Fri Jan 19 19:57:10 2007 +0100
40789 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
40791 Signed-off-by: Heiko Schocher <hs@denx.de>
40793 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
40794 Author: Heiko Schocher <hs@pollux.denx.de>
40795 Date: Fri Jan 19 18:05:26 2007 +0100
40797 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
40798 if you must swap the bytes between reading/writing.
40799 (Needed for the SC3 board)
40801 Signed-off-by: Heiko Schocher <hs@denx.de>
40803 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
40804 Author: Stefan Roese <sr@denx.de>
40805 Date: Thu Jan 18 16:05:47 2007 +0100
40807 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
40809 Signed-off-by: Stefan Roese <sr@denx.de>
40811 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
40812 Author: Stefan Roese <sr@denx.de>
40813 Date: Thu Jan 18 11:54:52 2007 +0100
40815 [PATCH] Update Prodrive P3Mx support
40817 Signed-off-by: Stefan Roese <sr@denx.de>
40819 commit 34167a36c29ee946b727465db5c014746a08e978
40820 Author: Stefan Roese <sr@denx.de>
40821 Date: Thu Jan 18 11:48:10 2007 +0100
40823 [PATCH] Add missing Taishan config file
40825 Signed-off-by: Stefan Roese <sr@denx.de>
40827 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
40828 Author: Heiko Schocher <hs@pollux.denx.de>
40829 Date: Thu Jan 18 11:28:51 2007 +0100
40831 [PATCH] Fix: Compilerwarnings for SC3 board.
40832 The EBC Configuration Register is now by CFG_EBC_CFG definable
40833 Added JFFS2 support for the SC3 board.
40835 Signed-off-by: Heiko Schocher <hs@denx.de>
40837 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
40838 Author: Stefan Roese <sr@denx.de>
40839 Date: Thu Jan 18 10:25:34 2007 +0100
40841 [PATCH] Add support for AMCC Taishan PPC440GX eval board
40843 Signed-off-by: Stefan Roese <sr@denx.de>
40845 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
40846 Author: Wolfgang Denk <wd@pollux.denx.de>
40847 Date: Tue Jan 16 18:30:50 2007 +0100
40849 Raname solidcard3 into sc3; add redundant env for sc3
40851 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
40852 Author: Wolfgang Denk <wd@pollux.denx.de>
40853 Date: Tue Jan 16 12:46:35 2007 +0100
40855 Update default environment for Solidcard3
40857 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
40858 Author: Stefan Roese <sr@denx.de>
40859 Date: Mon Jan 15 09:46:29 2007 +0100
40861 [PATCH] Fix 440SPe rev B detection from previous patch
40863 Signed-off-by: Stefan Roese <sr@denx.de>
40865 commit a443d31410c571ee8f970da819a44d698fdd6b1f
40866 Author: Heiko Schocher <hs@pollux.denx.de>
40867 Date: Sun Jan 14 13:35:31 2007 +0100
40869 [FIX] correct I2C Writes for the LM81 Sensor.
40871 Signed-off-by: Heiko Schocher <hs@denx.de>
40873 commit 0bba5452835f19a61204edcda3a58112fd8e2208
40874 Author: Wolfgang Denk <wd@pollux.denx.de>
40875 Date: Sat Jan 13 11:17:10 2007 +0100
40877 Undo commit 3033ebb2: reset command does not take any arguments
40879 Haiying Wang's modification to the reset command was broken, undo it.
40881 Signed-off-by: Wolfgang Denk <wd@denx.de>
40883 commit 95981778cff0038fd9941044d6a3eda810e33258
40884 Author: Stefan Roese <sr@denx.de>
40885 Date: Sat Jan 13 08:01:03 2007 +0100
40887 [PATCH] Update 440SP(e) cpu revisions
40889 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
40891 Signed-off-by: Stefan Roese <sr@denx.de>
40893 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
40894 Author: Stefan Roese <sr@denx.de>
40895 Date: Sat Jan 13 07:59:56 2007 +0100
40897 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
40899 Now the board revision and the current PCI bus speed are printed after
40902 Also the EBC initialising is now done via defines in the board config
40905 Signed-off-by: Stefan Roese <sr@denx.de>
40907 commit 36adff362c2c0141ff8a810d42a7e478f779130f
40908 Author: Stefan Roese <sr@denx.de>
40909 Date: Sat Jan 13 07:59:19 2007 +0100
40911 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
40913 Now the board revision and the current PCI bus speed are printed after
40916 Also the EBC initialising is now done via defines in the board config
40919 Signed-off-by: Stefan Roese <sr@denx.de>
40921 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
40922 Author: Stefan Roese <sr@denx.de>
40923 Date: Sat Jan 13 07:57:51 2007 +0100
40925 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
40927 Now the board revision and the current PCI bus speed are printed after
40930 Signed-off-by: Stefan Roese <sr@denx.de>
40932 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
40933 Author: Heiko Schocher <hs@pollux.denx.de>
40934 Date: Thu Jan 11 15:44:44 2007 +0100
40936 Added support for the SOLIDCARD III board from Eurodesign
40938 Signed-off-by: Heiko Schocher <hs@denx.de>
40940 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
40941 Author: Reinhard Thies <Reinhard.Thies@web.de>
40942 Date: Wed Jan 10 14:41:14 2007 +0100
40944 Adjusted default environment for cam5200 board.
40946 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
40947 Author: Wolfgang Denk <wd@pollux.denx.de>
40948 Date: Wed Jan 10 15:35:52 2007 +0100
40952 commit 787fa15860a57833e50bd30555079a9cd4e519b8
40953 Author: Wolfgang Denk <wd@pollux.denx.de>
40954 Date: Wed Jan 10 01:28:39 2007 +0100
40956 Fix auto_update for MCC200 board.
40958 The invocation of do_auto_update() is moved to the end of the
40959 misc_init_r() function, after the flash mappings have been
40960 initialized. Please find attached a patch that implements that
40963 Also correct the decoding of the keypad status. With this update, the
40964 key that will trigger the update is Column 2, Row 2.
40966 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
40967 Author: Marian Balakowicz <m8@semihalf.com>
40968 Date: Wed Jan 10 00:26:15 2007 +0100
40970 CAM5200 flash driver modifications:
40971 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
40972 - add second build target 'cam5200_niosflash' which still uses custom driver
40974 commit 67fea022fa957f59653b5238c7496f80a6b70432
40975 Author: Markus Klotzbuecher <mk@denx.de>
40976 Date: Tue Jan 9 16:02:48 2007 +0100
40978 SPC1920: cleanup memory contoller setup
40980 commit 8fc2102faa23593c80381437c09f7745a14deb40
40981 Author: Markus Klotzbuecher <mk@denx.de>
40982 Date: Tue Jan 9 14:57:14 2007 +0100
40984 Fix the cpu speed setup to work with all boards.
40986 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
40987 Author: Markus Klotzbuecher <mk@denx.de>
40988 Date: Tue Jan 9 14:57:13 2007 +0100
40990 SPC1920: add support for the FM18L08 Ramtron FRAM
40992 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
40993 Author: Markus Klotzbuecher <mk@denx.de>
40994 Date: Tue Jan 9 14:57:13 2007 +0100
40996 SPC1920: update the HPI register addresses to work with the second
40997 generation of hardware
40999 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
41000 Author: Markus Klotzbuecher <mk@creamnet.de>
41001 Date: Tue Jan 9 14:57:13 2007 +0100
41003 Miscellanious spc1920 related cleanups
41005 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
41006 Author: Markus Klotzbuecher <mk@denx.de>
41007 Date: Tue Jan 9 14:57:12 2007 +0100
41009 SPC1920 GO/NOGO led should be set to color red in U-Boot
41011 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
41012 Author: Markus Klotzbuecher <mk@creamnet.de>
41013 Date: Tue Jan 9 14:57:12 2007 +0100
41015 Add support for the DS3231 RTC
41017 commit 8139567b60d678584b05f0718a681f2047c5e14f
41018 Author: Markus Klotzbuecher <mk@creamnet.de>
41019 Date: Tue Jan 9 14:57:11 2007 +0100
41021 SMC1 uses external CLK4 instead of BRG on spc1920
41023 commit d8d9de1a02fbd880b613d607143d1f57342affc7
41024 Author: Markus Klotzbuecher <mk@creamnet.de>
41025 Date: Tue Jan 9 14:57:10 2007 +0100
41027 Update the SPC1920 CMB PLD driver
41029 commit 3f34f869162750e5e999fd140f884f5de952bcfe
41030 Author: Markus Klotzbuecher <mk@creamnet.de>
41031 Date: Tue Jan 9 14:57:10 2007 +0100
41033 Add / enable I2C support on the spc1920 board
41035 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
41036 Author: Markus Klotzbuecher <mk@creamnet.de>
41037 Date: Tue Jan 9 14:57:10 2007 +0100
41039 Add support for the tms320671x host port interface (HPI)
41041 commit f4eb54529bb3664c3a562e488b460fe075f79d67
41042 Author: Wolfgang Denk <wd@pollux.denx.de>
41043 Date: Sun Jan 7 00:13:11 2007 +0100
41045 Prepare for release 1.2.0
41047 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
41048 Author: Stefan Roese <sr@denx.de>
41049 Date: Sat Jan 6 15:58:09 2007 +0100
41051 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
41053 This patch fixes a problem with an incorrect setup for the refresh
41054 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
41056 Signed-off-by: Stefan Roese <sr@denx.de>
41058 commit f16c1da9577f06c5fc08651a4065537407de4635
41059 Author: Stefan Roese <sr@denx.de>
41060 Date: Sat Jan 6 15:56:13 2007 +0100
41062 [PATCH] Update ALPR board files
41064 This update brings the ALPR board support to the newest version.
41065 It also fixes a problem with the NAND driver.
41067 Signed-off-by: Stefan Roese <sr@denx.de>
41069 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
41070 Author: Stefan Roese <sr@denx.de>
41071 Date: Fri Jan 5 11:46:05 2007 +0100
41073 [PATCH] nand: Fix problem with oobsize calculation
41075 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
41077 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
41078 returns a 0x15. In the code fragment below bits [1:0] determine the
41079 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
41080 next field is also ANDed with 0x3. However this is a one bit field
41081 as defined in the Hynix and Samsung parts in the 4th ID byte that
41082 determins the oobsize, not a two bit field. It works on Samsung as
41083 bits[3:2] are 01. However for the Hynix there is a 11 in these two
41084 bits, so the oob size gets messed up.
41086 I checked the correct linux code and the suggested fix from Brian is
41087 also available in the linux nand mtd driver.
41089 Signed-off-by: Stefan Roese <sr@denx.de>
41091 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
41092 Author: Stefan Roese <sr@denx.de>
41093 Date: Fri Jan 5 10:40:36 2007 +0100
41095 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
41097 This fix will make the MAL burst disabling patch for the Linux
41098 EMAC driver obsolete.
41100 Signed-off-by: Stefan Roese <sr@denx.de>
41102 commit 023889838282b6237b401664f22dd22dfba2c066
41103 Author: Stefan Roese <sr@denx.de>
41104 Date: Fri Jan 5 10:38:05 2007 +0100
41106 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
41108 This code will optimize the DDR2 controller setup on a board specific
41111 Note: This code doesn't work right now on the NAND booting image for the
41112 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
41114 Signed-off-by: Stefan Roese <sr@denx.de>
41116 commit cce4acbb68398634b8d011ed7bb0d12269c84230
41117 Author: Bartlomiej Sieka <tur@semihalf.com>
41118 Date: Thu Dec 28 19:08:21 2006 +0100
41121 - fix a typo in V38B config file
41122 - move watchdog initialisation earlier in the boot process
41123 - add "wdt=off" to default kernel command line (disables kernel watchdog)
41125 commit 92eb729bad876725aeea908d2addba0800620840
41126 Author: Wolfgang Denk <wd@pollux.denx.de>
41127 Date: Wed Dec 27 01:26:13 2006 +0100
41129 Fix bug in adaption of Stefano Babic's CFI driver patch.
41131 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
41132 Author: Wolfgang Denk <wd@pollux.denx.de>
41133 Date: Sun Dec 24 01:42:57 2006 +0100
41135 Minor code cleanup.
41137 commit d784fdb05900ada3686d5778783e1fb328e9fb66
41138 Author: Stefano Babic <sbabic@denx.de>
41139 Date: Tue Dec 12 00:22:42 2006 +0100
41141 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
41143 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
41144 Author: Stefan Roese <sr@denx.de>
41145 Date: Fri Dec 22 14:29:40 2006 +0100
41147 [PATCH] Fix sequoia flash autodetection (finally correct)
41149 Now 32MByte and 64MByte FLASH is know to work and other
41150 configurations should work too.
41152 Signed-off-by: Stefan Roese <sr@denx.de>
41154 commit 82e5236a8b719543643fd26d5827938ab2b94818
41155 Author: Wolfgang Denk <wd@pollux.denx.de>
41156 Date: Fri Dec 22 10:30:26 2006 +0100
41158 Minor code cleanup; update CHANGELOG.
41160 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
41161 Author: Heiko Schocher <hs@pollux.denx.de>
41162 Date: Thu Dec 21 17:17:02 2006 +0100
41164 Added support for the TQM8272 board from TQ
41166 Signed-off-by: Heiko Schocher <hs@denx.de>
41168 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
41169 Author: Heiko Schocher <hs@pollux.denx.de>
41170 Date: Thu Dec 21 16:14:48 2006 +0100
41172 [PATCH] Add support for the UC101 board from MAN.
41174 Signed-off-by: Heiko Schocher <hs@denx.de>
41176 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
41177 Author: Bartlomiej Sieka <tur@semihalf.com>
41178 Date: Wed Dec 20 00:29:43 2006 +0100
41180 Fix to make the baudrate changes immediate for the MCF52x2 family.
41182 commit daa6e418bcc0c717752e8de939c213c790286096
41183 Author: Bartlomiej Sieka <tur@semihalf.com>
41184 Date: Wed Dec 20 00:27:32 2006 +0100
41186 Preliminary support for the iDMR board (ColdFire).
41188 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
41189 Author: Andrei Safronov <safronov@pollux.denx.de>
41190 Date: Fri Dec 8 16:23:08 2006 +0100
41192 automatic update mechanism
41194 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
41195 Author: roy zang <tie-fei.zang@freescale.com>
41196 Date: Mon Dec 4 17:56:59 2006 +0800
41198 Slight code clean up.
41199 Add comments, delete duplicate define and remove spaces.
41200 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41202 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
41203 Author: roy zang <tie-fei.zang@freescale.com>
41204 Date: Mon Dec 4 17:54:21 2006 +0800
41206 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
41207 multiplier table can not refect the real PLL clock behavior of these
41208 processors. Please refer to the hardware specification for detailed
41209 information of the corresponding processors.
41210 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41212 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
41213 Author: roy zang <tie-fei.zang@freescale.com>
41214 Date: Mon Dec 4 14:46:23 2006 +0800
41216 Remove the static MAC address, ip address, server ip, netmask and
41217 gateway ip for network setting.
41218 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41220 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
41221 Author: roy zang <tie-fei.zang@freescale.com>
41222 Date: Mon Dec 4 14:33:08 2006 +0800
41224 Remove the duplicate memory test code for mpc744ihpc2 board.
41225 If a memory test is needed, please use the functions in
41226 post/memory.c or memtest command.
41227 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41229 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
41230 Author: roy zang <tie-fei.zang@freescale.com>
41231 Date: Fri Dec 1 19:01:25 2006 +0800
41233 Fix the exception occuring in RAM table search issue.
41234 The original search_one_table() function code can only processes the search
41235 for the exception occurring in FLASH/ROM, because the exception and fixup
41236 table usually locate in FLASH. If the exception address is also in
41237 FLASH, it will be OK.
41238 If the exception occurs in RAM, after the u-boot relocation, a
41239 relocation offset should be added.
41241 clean up the code in cpu/74xx_7xx/cpu.c
41243 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41245 commit ee311214e0d216f904feea269599d0934bf71f23
41246 Author: roy zang <tie-fei.zang@freescale.com>
41247 Date: Fri Dec 1 11:47:36 2006 +0800
41249 Clean up the code according to codestyle:
41250 (1) remove some C++ comments.
41251 (2) remove trailing white space.
41252 (3) remove trailing empty line.
41253 (4) Indentation by table.
41254 (5) remove {} in one line condition.
41255 (6) add space before '(' in function call.
41256 Remove some weird printf () output.
41257 Add necessary comments.
41258 Modified Makefile to support building in a separate directory.
41260 commit dd520bf314c7add4183c5191692180f576f96b60
41261 Author: Wolfgang Denk <wd@pollux.denx.de>
41262 Date: Thu Nov 30 18:02:20 2006 +0100
41266 commit 8d9a8610b8256331132227e9e6585c6bd5742787
41267 Author: Wolfgang Denk <wd@pollux.denx.de>
41268 Date: Thu Nov 30 01:54:07 2006 +0100
41270 Code cleanup. Update CHANGELOG.
41272 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
41273 Author: Grant Likely <grant.likely@secretlab.ca>
41274 Date: Wed Nov 29 16:23:42 2006 +0100
41276 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
41278 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
41279 not the XLB frequency.
41281 This patch depends on the previous patches for MPC52xx device tree support
41283 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41284 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
41286 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
41287 Author: Stefan Roese <sr@denx.de>
41288 Date: Wed Nov 29 15:42:37 2006 +0100
41290 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
41292 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
41293 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
41294 quite similar and share the same board directory "prodrive/p3mx"
41295 and the same config file "p3mx.h".
41297 Signed-off-by: Stefan Roese <sr@denx.de>
41299 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
41300 Author: Stefan Roese <sr@denx.de>
41301 Date: Wed Nov 29 12:53:15 2006 +0100
41303 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
41305 In the bootvx command the load address was only read from the env
41306 variable "loadaddr" and not optionally passed as paramter as described
41307 in the help. This is fixed with this patch. The behaviour is now the
41308 same as in the bootelf command.
41310 Signed-off-by: Stefan Roese <sr@denx.de>
41312 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
41313 Author: Stefan Roese <sr@denx.de>
41314 Date: Wed Nov 29 12:03:57 2006 +0100
41316 [PATCH] include/ppc440.h minor error affecting interrupts
41318 Fixed include/ppc440.c for UIC address Bug
41320 Corrects bug affecting the addresses for the universal interrupt
41321 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
41323 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
41324 Signed-off-by: Stefan Roese <sr@denx.de>
41326 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
41327 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
41328 Date: Tue Nov 28 16:17:27 2006 -0600
41330 Make fsl-i2c not conflict with SOFT I2C
41332 Signed-off-by: Timur Tabi <timur@freescale.com>
41334 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
41335 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
41336 Date: Tue Nov 28 16:17:18 2006 -0600
41338 Fix I2C master address initialization.
41340 Signed-off-by: Timur Tabi <timur@freescale.com>
41342 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
41343 Author: Kim Phillips <kim.phillips@freescale.com>
41344 Date: Tue Nov 28 23:31:19 2006 -0600
41346 Assign maintainers for mpc8349emds and mpc8360emds
41348 Dave for mpc8360emds, and me for mpc8349emds.
41350 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
41351 Author: Kim Phillips <kim.phillips@freescale.com>
41352 Date: Tue Nov 28 23:28:33 2006 -0600
41354 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
41356 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
41357 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
41359 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
41360 Author: Timur Tabi <timur@freescale.com>
41361 Date: Tue Nov 28 12:09:35 2006 -0600
41363 mpc83xx: Miscellaneous code style fixes
41365 Implement various code style fixes and similar changes.
41367 Signed-off-by: Timur Tabi <timur@freescale.com>
41369 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
41370 Author: Stefan Roese <sr@denx.de>
41371 Date: Tue Nov 28 17:55:49 2006 +0100
41373 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
41375 This patch adds the code and configuration necessary to boot with an
41376 arch/powerpc Linux kernel.
41378 Signed-off-by: Grant Likely <grant.likely@gmail.com>
41379 Acked-by: Jon Loeliger <jdl@freescale.com>
41381 commit e732faec95a83cb468b4850ae807c8301dde8f6a
41382 Author: Stefan Roese <sr@denx.de>
41383 Date: Tue Nov 28 16:09:24 2006 +0100
41385 [PATCH] PPC4xx: 440SP Rev. C detection added
41387 Signed-off-by: Stefan Roese <sr@denx.de>
41389 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
41390 Author: Stefan Roese <sr@denx.de>
41391 Date: Tue Nov 28 11:04:45 2006 +0100
41393 [PATCH] nand: Fix patch merge problem
41395 Signed-off-by: Stefan Roese <sr@denx.de>
41397 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
41398 Author: Stefan Roese <sr@denx.de>
41399 Date: Tue Nov 28 11:04:45 2006 +0100
41401 [PATCH] nand: Fix patch merge problem
41403 Signed-off-by: Stefan Roese <sr@denx.de>
41405 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
41406 Author: Wolfgang Denk <wd@pollux.denx.de>
41407 Date: Mon Nov 27 22:53:53 2006 +0100
41411 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
41412 Author: Stefan Roese <sr@denx.de>
41413 Date: Mon Nov 27 17:43:25 2006 +0100
41415 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
41417 Patch below corrects the setting of the zmiifer register, it was
41418 overwritting the register rather than ORing the settings.
41420 Signed-off-by: Neil Wilson <NWilson@airspan.com>
41421 Signed-off-by: Stefan Roese <sr@denx.de>
41423 commit d1a72545296800b7e219f93104ad5836f0003d66
41424 Author: Stefan Roese <sr@denx.de>
41425 Date: Mon Nov 27 17:34:10 2006 +0100
41427 [PATCH] Select NAND embedded environment from board configuration
41429 The current NAND Bootloader setup forces the environment
41430 variables to be in line with the bootloader. This change
41431 enables the configuration to be made in the board include
41432 file instead so that it can be individually enabled.
41434 Signed-off-by: Nick Spence <nick.spence@freescale.com>
41435 Signed-off-by: Stefan Roese <sr@denx.de>
41437 commit 15784862857c3c2214498defcfed84ff137fb81e
41438 Author: Stefan Roese <sr@denx.de>
41439 Date: Mon Nov 27 17:22:19 2006 +0100
41441 [PATCH] nand_wait() timeout fixes
41443 Two fixes for the nand_wait() function in
41444 drivers/nand/nand_base.c:
41446 1. Use correct timeouts. The original timeouts in Linux
41447 source are 400ms and 20ms not 40s and 20s
41449 2. Return correct error value in case of timeout. 0 is
41452 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
41453 Signed-off-by: Stefan Roese <sr@denx.de>
41455 commit da5553b095bf04f4f109ad7e565dae3aba47b230
41456 Author: Stefan Roese <sr@denx.de>
41457 Date: Mon Nov 27 17:04:06 2006 +0100
41459 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
41461 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
41462 arguments to bootm. It removes the getenv("disable_of") test that used
41463 to be used for this purpose.
41465 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41466 Acked-by: Jon Loeliger <jdl@freescale.com>
41468 commit a9398e018593782c5fa7d0741955fc1256b34c1e
41469 Author: Wolfgang Denk <wd@pollux.denx.de>
41470 Date: Mon Nov 27 15:32:42 2006 +0100
41472 Minor code cleanup. Update CHANGELOG.
41474 commit 1729b92cde575476684bffe819d0b7791b57bff2
41475 Author: Stefan Roese <sr@denx.de>
41476 Date: Mon Nov 27 14:52:04 2006 +0100
41478 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
41480 Signed-off-by: Stefan Roese <sr@denx.de>
41482 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
41483 Author: Stefan Roese <sr@denx.de>
41484 Date: Mon Nov 27 14:49:51 2006 +0100
41486 [PATCH] alpr: remove unused board specific flash driver
41488 Signed-off-by: Stefan Roese <sr@denx.de>
41490 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
41491 Author: Stefan Roese <sr@denx.de>
41492 Date: Mon Nov 27 14:48:41 2006 +0100
41494 [PATCH] 4xx: Fix problem with board specific reset code
41496 Signed-off-by: Stefan Roese <sr@denx.de>
41498 commit ec0c2ec725aec9524a177a77ce75559e644a931a
41499 Author: Stefan Roese <sr@denx.de>
41500 Date: Mon Nov 27 14:46:06 2006 +0100
41502 [PATCH] Remove testing 4xx enet PHY setup
41504 Signed-off-by: Stefan Roese <sr@denx.de>
41506 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
41507 Author: Stefan Roese <sr@denx.de>
41508 Date: Mon Nov 27 14:12:17 2006 +0100
41510 [PATCH] Update Prodrive ALPR board support (440GX)
41512 Signed-off-by: Stefan Roese <sr@denx.de>
41514 commit 58b485776698c3d71ec5a215e392123b4c15afa3
41515 Author: Markus Klotzbuecher <mk@denx.de>
41516 Date: Mon Nov 27 11:51:21 2006 +0100
41518 Add a small README with information on the generic ohci driver.
41520 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
41521 Author: Markus Klotzbuecher <mk@denx.de>
41522 Date: Mon Nov 27 11:46:46 2006 +0100
41524 Fix some endianness issues related to the generic ohci driver
41526 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
41527 Author: Markus Klotzbuecher <mk@denx.de>
41528 Date: Mon Nov 27 11:44:58 2006 +0100
41530 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
41531 to choose between the old and the generic OHCI drivers.
41533 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
41534 Author: Markus Klotzbuecher <mk@denx.de>
41535 Date: Mon Nov 27 11:43:09 2006 +0100
41537 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
41538 and adapted board configs TQM5200 and yosemite accordingly. This commit
41539 also makes the maximum number of root hub ports configurable
41540 (CFG_USB_OHCI_MAX_ROOT_PORTS).
41542 commit 78d620ebb5871d252270dedfad60c6568993b780
41543 Author: Wolfgang Denk <wd@atlas.denx.de>
41544 Date: Thu Nov 23 22:58:58 2006 +0100
41546 Updates for TQM5200 modules:
41547 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
41548 - simplify "udate" definitions
41550 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
41551 Author: Stefan Roese <sr@denx.de>
41552 Date: Wed Nov 22 13:20:50 2006 +0100
41554 [PATCH] PPC4xx start.S: Fix for processor errata
41556 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
41557 errata 1.12: 440_33 by moving patch up in code.
41559 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
41560 Signed-off-by: Stefan Roese <sr@denx.de>
41562 commit 4ef6251403f637841000e0fef9e832aa01339822
41563 Author: Stefan Roese <sr@denx.de>
41564 Date: Mon Nov 20 20:39:52 2006 +0100
41566 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
41568 Signed-off-by: Stefan Roese <sr@denx.de>
41570 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
41571 Author: Wolfgang Denk <wd@pollux.denx.de>
41572 Date: Mon Nov 20 10:28:30 2006 +0100
41576 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
41577 Author: Stefan Roese <sr@denx.de>
41578 Date: Mon Nov 13 13:55:24 2006 +0100
41580 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
41582 * Adds support for AMD command set Top Boot flash geometry reversal
41583 * Adds support for reading JEDEC Manufacturer ID and Device ID
41584 * Adds support for displaying command set, manufacturer id and
41585 device ids (flinfo)
41586 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
41587 * Removes outdated change history (refer to git log instead)
41589 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
41590 Signed-off-by: Stefan Roese <sr@denx.de>
41592 commit b21b511d4c50408f4853f46f06b601272196223f
41593 Author: Wolfgang Denk <wd@pollux.denx.de>
41594 Date: Sun Nov 12 21:13:23 2006 +0100
41598 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
41599 Author: Bartlomiej Sieka <tur@semihalf.com>
41600 Date: Sat Nov 11 22:48:22 2006 +0100
41602 Disable the watchdog in the default config for the V38B board.
41604 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
41605 Author: Bartlomiej Sieka <tur@semihalf.com>
41606 Date: Sat Nov 11 22:43:00 2006 +0100
41608 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
41609 group is enabled for USB earlier (in cpu_init_f() instead of
41610 usb_lowlevel_init()).
41612 commit 91650b3e4de688038d4f71279c44858e3e2c6870
41613 Author: Wolfgang Denk <wd@pollux.denx.de>
41614 Date: Mon Nov 6 17:06:36 2006 +0100
41616 Sequential accesses to non-existent memory must be synchronized,
41617 at least on G2 cores.
41619 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
41621 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
41622 Author: Timur Tabi <timur@freescale.com>
41623 Date: Fri Nov 3 19:15:00 2006 -0600
41625 mpc83xx: Update 83xx to use fsl_i2c.c
41627 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
41628 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
41629 Added multiple I2C bus support to fsl_i2c.c.
41631 Signed-off-by: Timur Tabi <timur@freescale.com>
41633 commit d239d74b1c937984bc519083a8e7de373a390f06
41634 Author: Timur Tabi <timur@freescale.com>
41635 Date: Fri Nov 3 12:00:28 2006 -0600
41637 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
41639 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
41640 tree matches the other 8xxx trees.
41642 Signed-off-by: Timur Tabi <timur@freescale.com>
41644 commit f7fb2e703ec9688541416962724adff70a7322cb
41645 Author: Kim Phillips <kim.phillips@freescale.com>
41646 Date: Thu Nov 2 19:47:11 2006 -0600
41648 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
41650 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
41651 Author: Dave Liu <daveliu@freescale.com>
41652 Date: Thu Nov 2 18:05:50 2006 -0600
41654 mpc83xx: Fix the incorrect dcbz operation
41656 The 834x rev1.x silicon has one CPU5 errata.
41658 The issue is when the data cache locked with
41659 HID0[DLOCK], the dcbz instruction looks like no-op inst.
41661 The right behavior of the data cache is when the data cache
41662 Locked with HID0[DLOCK], the dcbz instruction allocates
41665 The 834x rev3.0 and later and 8360 have not this bug inside.
41667 So, when 834x rev3.0/8360 are working with ECC, the dcbz
41668 instruction will corrupt the stack in cache, the processor will
41671 However, the 834x rev1.x can work with ECC with these code,
41672 because the sillicon has this cache bug. The dcbz will not
41673 corrupt the stack in cache.
41674 Really, it is the fault code running on fault sillicon.
41676 This patch fix the incorrect dcbz operation. Instead of
41677 CPU FP writing to initialise the ECC.
41680 * Fix the incorrect dcbz operation instead of CPU FP
41681 writing to initialise the ECC memory. Otherwise, it
41682 will corrupt the stack in cache, The processor will checkstop
41685 Signed-off-by: Dave Liu <daveliu@freescale.com>
41687 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
41688 Author: Kim Phillips <kim.phillips@freescale.com>
41689 Date: Wed Nov 1 00:10:40 2006 -0600
41691 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
41693 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
41694 STDOUT_PATH configuration bits to mpc8349emds,
41695 mpc8349itx, and mpc8360emds board code.
41697 redo environment to use bootm with the fdtaddr
41698 for booting ARCH=powerpc kernels by default,
41699 and provide default fdtaddr values.
41701 commit 48041365b3420589ad464ebc7752e0053538b729
41702 Author: Kim Phillips <kim.phillips@freescale.com>
41703 Date: Wed Nov 1 00:07:25 2006 -0600
41705 mpc83xx: change ft code to modify local-mac-address property
41707 Update 83xx OF code to update local-mac-address properties
41708 for ethernet instead of the obsolete 'address' property.
41710 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
41711 Author: Timur Tabi <timur@freescale.com>
41712 Date: Tue Oct 31 21:23:16 2006 -0600
41714 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
41716 This patch also adds an improved I2C set_speed(), which handles all clock
41719 Signed-off-by: Timur Tabi <timur@freescale.com>
41721 commit ac4b5622ce050b5ee1e154b98df630d778661632
41722 Author: Dave Liu <daveliu@freescale.com>
41723 Date: Tue Oct 31 19:54:59 2006 -0600
41725 mpc83xx: add the README.mpc8360emds
41727 add doc/README.mpc8360emds to accompany the new board support
41729 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
41730 Author: Dave Liu <daveliu@freescale.com>
41731 Date: Fri Nov 3 12:11:15 2006 -0600
41733 mpc83xx: add QE ethernet support
41735 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
41737 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
41738 Author: Dave Liu <daveliu@freescale.com>
41739 Date: Fri Nov 3 19:33:44 2006 -0600
41741 mpc83xx: Add MPC8360EMDS basic board support
41743 Add support for the Freescale MPC8360EMDS board.
41744 Includes DDR, DUART, Local Bus, PCI.
41746 commit 23892e49352de74f7fac36ff90bb1be143d195e3
41747 Author: Dave Liu <daveliu@freescale.com>
41748 Date: Tue Oct 31 19:30:40 2006 -0600
41750 mpc83xx: add the QUICC Engine (QE) immap file
41752 common QE immap file. Also required for 8360.
41754 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
41755 Author: Dave Liu <daveliu@freescale.com>
41756 Date: Tue Oct 31 19:25:38 2006 -0600
41758 mpc83xx: Add 8360 specifics to 83xx immap
41760 Mainly add QE device dependencies, with appropriate 8360 protection.
41763 commit 988833324a7fda482c8ac3ca23eb539f8232e404
41764 Author: Timur Tabi <timur@freescale.com>
41765 Date: Tue Oct 31 19:14:41 2006 -0600
41767 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
41769 PREREQUISITE PATCHES:
41771 * This patch can only be applied after the following patches have been applied:
41773 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
41774 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
41778 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
41779 the clock for the 2nd USB board (Linux kernel will hang otherwise),
41780 and fix the CONFIG_BOOTARGS macro.
41782 Signed-off-by: Timur Tabi <timur@freescale.com>
41784 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
41785 Author: Timur Tabi <timur@freescale.com>
41786 Date: Tue Oct 31 18:44:42 2006 -0600
41788 mpc83xx: Add support for the MPC8349E-mITX
41790 PREREQUISITE PATCHES:
41792 * This patch can only be applied after the following patches have been applied:
41794 1) DNX#2006090742000024 "Add support for multiple I2C buses"
41795 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
41796 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
41797 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
41798 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
41802 * Add support for the Freescale MPC8349E-mITX reference design platform.
41803 The second TSEC (Vitesse 7385 switch) is not supported at this time.
41805 Signed-off-by: Timur Tabi <timur@freescale.com>
41807 commit 183da6d9b446cc12123455844ad1187e2375626f
41808 Author: Ben Warren <bwarren@qstreams.com>
41809 Date: Tue Sep 12 10:15:53 2006 -0400
41811 Additional MPC8349 support for multibus i2c
41815 Here is a patch for a file that was accidentally left out of a previous
41818 It accompanies the patch with ticket DNX#2006090742000024
41821 Change PCI initialization to use new multi-bus I2C API.
41826 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
41827 Author: Ben Warren <bwarren@qstreams.com>
41828 Date: Thu Sep 7 16:51:04 2006 -0400
41830 Multi-bus I2C implementation of MPC834x
41834 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
41835 family and the MPC8349EMDS board in particular.
41836 This patch requires Patch 1 (Add support for multiple I2C buses).
41837 Testing was performed on a 533MHz board.
41839 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
41841 Signed-off-by: Ben Warren <bwarren@qstreams.com>
41844 Implemented driver-level code to support two I2C buses on the
41845 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
41846 are 50kHz, 100kHz and 400kHz on each bus.
41851 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
41852 Author: Ben Warren <bwarren@qstreams.com>
41853 Date: Thu Sep 7 16:50:54 2006 -0400
41855 Add support for multiple I2C buses
41859 Attached is a patch providing support for multiple I2C buses at the
41860 command level. The second part of the patch includes an implementation
41861 for the MPC834x CPU and MPC8349EMDS board.
41863 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
41865 Signed-off-by: Ben Warren <bwarren@qstreams.com>
41869 1. Include new 'i2c' command (based on USB implementation) using
41870 CONFIG_I2C_CMD_TREE.
41872 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
41873 the commands to change bus number and speed are only available under the
41874 new 'i2c' command mentioned in the first bullet.
41876 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
41877 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
41878 of an array of bus-device pairs. Otherwise, it is an array of uchar.
41881 Added new 'i2c' master command for all I2C interaction. This is
41882 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
41883 setting I2C bus speed as well as changing the active bus if the board
41884 has more than one (conditionally compiled with
41885 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
41891 commit bed85caf872714ebf53013967a695c9d63acfc68
41892 Author: Timur Tabi <timur@freescale.com>
41893 Date: Tue Oct 31 18:13:36 2006 -0600
41895 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
41899 * Errata DDR6, which affects all current MPC 834x processors, lists changes
41900 required to maintain compatibility with various types of DDR memory. This
41901 patch implements those changes.
41903 Signed-off-by: Timur Tabi <timur@freescale.com>
41905 commit afd6e470f639883002c7c59d562690a5cb0f4865
41906 Author: Timur Tabi <timur@freescale.com>
41907 Date: Wed Oct 25 18:45:23 2006 -0500
41909 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
41911 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
41912 Author: Timur Tabi <timur@freescale.com>
41913 Date: Tue Aug 22 17:07:00 2006 -0500
41915 mpc83xx: Add support for variable flash memory sizes on 83xx systems
41919 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
41920 window registers, instead of using a hard-coded value of 8MB.
41922 Signed-off-by: Timur Tabi <timur@freescale.com>
41924 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
41925 Author: Tanya Jiang <tanya.jiang@freescale.com>
41926 Date: Thu Aug 3 18:38:13 2006 +0800
41928 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
41930 Unified TQM834x variable names with 83xx and consolidated macro
41931 in preparation for the 8360 and other upcoming 83xx devices.
41933 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
41935 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
41936 Author: Dave Liu <daveliu@freescale.com>
41937 Date: Wed Oct 25 14:41:21 2006 -0500
41939 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
41941 Incorporated the common unified variable names and the changes in preparation
41942 for releasing mpc8360 patches.
41944 Signed-off-by: Dave Liu <daveliu@freescale.com>
41946 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
41947 Author: Tanya Jiang <tanya.jiang@freescale.com>
41948 Date: Thu Aug 3 18:36:02 2006 +0800
41950 mpc83xx: Fix missing build for mpc8349emds pci.c
41952 Make pci build for mpc8349emds
41954 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
41956 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
41957 Author: Tanya Jiang <tanya.jiang@freescale.com>
41958 Date: Thu Aug 3 18:39:49 2006 +0800
41960 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
41962 Removed unused file resetvec.S for mpc83xx cpu
41964 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
41966 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
41967 Author: Nick Spence <Nick.Spence@freescale.com>
41968 Date: Sat Sep 30 00:32:59 2006 -0700
41970 NAND Flash verify across block boundaries
41972 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
41974 and the write crosses a block boundary. The pointer to the verification
41975 buffer (bufstart) is not being updated to reflect the starting of the
41977 block so the verification of the second block fails.
41981 * Fix NAND FLASH page verification across block boundaries
41983 commit f484dc791a3932537213c43c654cc1295c64b84c
41984 Author: Nick Spence <nick.spence@freescale.com>
41985 Date: Thu Sep 7 07:39:46 2006 -0700
41987 Added RGMII support to the TSECs and Marvell 881111 Phy
41989 Added a phy initialization to adjust the RGMII RX and TX timing
41990 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
41992 Signed-off-by: Nick Spence <nick.spence@freescale.com>
41994 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
41995 Author: roy zang <tie-fei.zang@freescale.com>
41996 Date: Fri Nov 3 13:10:00 2006 +0800
41998 Remove some unused CFG define.
41999 undef CFG_DRAM_TEST
42001 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
42002 Author: roy zang <tie-fei.zang@freescale.com>
42003 Date: Fri Nov 3 13:07:36 2006 +0800
42005 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
42006 Both work. 0xFF000000 seems more reasonable.
42008 commit c59200443072353044aa4bf737a5a60f9a9af231
42009 Author: Wolfgang Denk <wd@pollux.denx.de>
42010 Date: Thu Nov 2 15:15:01 2006 +0100
42012 Release U-Boot 1.1.6
42014 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
42015 Author: roy zang <tie-fei.zang@freescale.com>
42016 Date: Thu Nov 2 19:14:48 2006 +0800
42018 This patch comes from Yuli's posted patch on 8/8/2006
42019 titled "CFI Driver Little-Endian write Issue".
42021 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
42023 If that patch applied, please discard this one.
42024 Until now , I do not see his patch is applied. So please apply this one.
42026 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
42027 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42029 commit b825f158e449e1e9cf74c08e572955e122394c96
42030 Author: roy zang <tie-fei.zang@freescale.com>
42031 Date: Thu Nov 2 19:12:31 2006 +0800
42033 Tsi108 on chip i2c support.
42035 The i2c Interface provides a master-only, serial interface that can be
42036 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
42039 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42040 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42042 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
42043 Author: roy zang <tie-fei.zang@freescale.com>
42044 Date: Thu Nov 2 19:11:06 2006 +0800
42046 Tsi108 on chip pci controller support.
42048 If there is no pci card, the tsi108/109 pci configure read will
42049 cause a machine check exception to the processor. PCI error should
42050 also be cleared after the read.
42052 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42053 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42055 commit d1927cee977126e547ceeba23e4f978f377cfb8f
42056 Author: roy zang <tie-fei.zang@freescale.com>
42057 Date: Thu Nov 2 19:08:55 2006 +0800
42059 Tundra tsi108 on chip Ethernet controller support.
42061 The following is a brief description of the Ethernet controller:
42062 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
42063 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
42064 to manage the two physical connection devices (PHYs). Each Ethernet port
42065 has its own statistics monitor that tracks and reports key interface
42066 statistics. Each port supports a 256-entry hash table for address
42067 filtering. In addition, each port is bridged to the Switch Fabric
42068 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
42070 Each Ethernet port also has a pair of internal Ethernet DMA channels to
42071 support the transmit and receive data flows. The Ethernet DMA channels
42072 use descriptors set up in memory, the memory map of the device, and
42073 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
42074 handles arbitration for the Switch Fabric. The Controller also
42075 has a register businterface for register accesses and status monitor
42078 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
42079 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
42080 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
42081 data flows to and from the Ethernet Controller through the Switch Fabric.
42083 Each Ethernet port uses its transmit and receive DMA channels to manage
42084 data flows through buffer descriptors that are predefined by the
42085 system (the descriptors can exist anywhere in the system memory map).
42086 These descriptors are data structures that point to buffers filled
42087 with data ready to transmit over Ethernet, or they point to empty
42088 buffers ready to receive data from Ethernet.
42090 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42091 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42093 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
42094 Author: roy zang <tie-fei.zang@freescale.com>
42095 Date: Thu Nov 2 19:01:33 2006 +0800
42097 Tundra tsi108 header file.
42099 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
42100 PowerPC processors that offers numerous system interconnect options for
42101 embedded application designers. The Tsi108 can interconnect 60x or
42102 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
42103 and Flash. Provided the macro define for tsi108 chip.
42105 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42106 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42108 commit 87c4db09699c6b89176b31004afcb83eb1585d47
42109 Author: roy zang <tie-fei.zang@freescale.com>
42110 Date: Thu Nov 2 18:59:15 2006 +0800
42112 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
42113 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
42115 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42116 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42118 commit 27801b8ab11c61b577e45742a515bb3b23b80241
42119 Author: roy zang <tie-fei.zang@freescale.com>
42120 Date: Thu Nov 2 18:57:21 2006 +0800
42122 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
42123 Make ,config.mk and link file for the mpc7448hpc2 board.
42125 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42126 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42128 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
42129 Author: roy zang <tie-fei.zang@freescale.com>
42130 Date: Thu Nov 2 18:55:04 2006 +0800
42132 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
42133 The mpc7448hpc2 board support header file.
42135 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42136 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42138 commit 625bb5ddb50b243f931262ca8c46956409471917
42139 Author: roy zang <tie-fei.zang@freescale.com>
42140 Date: Thu Nov 2 18:52:21 2006 +0800
42142 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
42143 The mpc7448hpc2 board support low level assemble language init code.
42145 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42146 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42148 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
42149 Author: roy zang <tie-fei.zang@freescale.com>
42150 Date: Thu Nov 2 18:49:51 2006 +0800
42152 General code modification for mpc7448hpc2 board support.
42153 1. Add 7447A and 7448 processor support.
42154 2. Add the following flags.
42156 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
42157 (such as by switch on board), this flag should be set.
42159 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
42160 relocates to RAM, this flag should be set.
42162 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
42163 system hang in exception, this flag should be set.
42165 There is a design issue for tsi108/109 pci configure read. When pci scan
42166 the slots, if there is no pci card, the tsi108/9 will cause a machine
42167 check exception for mpc7448 processor.
42169 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
42170 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42172 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
42173 Author: roy zang <tie-fei.zang@freescale.com>
42174 Date: Thu Nov 2 18:34:47 2006 +0800
42176 Add README file for mpc7448hpc2 board.
42177 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42179 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
42180 Author: Bartlomiej Sieka <tur@semihalf.com>
42181 Date: Wed Nov 1 02:04:38 2006 +0100
42183 Finish up support for MarelV38B board
42184 - add watchdog support
42185 - enable GPIO_WKUP_7 pin for input
42188 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
42189 Author: Bartlomiej Sieka <tur@semihalf.com>
42190 Date: Wed Nov 1 01:45:46 2006 +0100
42192 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
42193 * remove warnings when compiling ethaddr.c
42194 * adjust linker script (fixes a crash resulting from incorrect
42195 definition of __u_boot_cmd_start)
42196 - Some MarelV38B code cleanup.
42198 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
42199 Author: Bartlomiej Sieka <tur@semihalf.com>
42200 Date: Wed Nov 1 01:38:16 2006 +0100
42202 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
42203 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
42204 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
42205 MPC5XXX_WU_GPIO_DATA_O for affected boards.
42207 - Add defintions for some MPC5XXX GPIO pins.
42209 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
42210 Author: Bartlomiej Sieka <tur@semihalf.com>
42211 Date: Wed Nov 1 01:34:29 2006 +0100
42213 Changed MarelV38B board make target to lowercase. Config file cleanup.
42215 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
42216 Author: Wolfgang Denk <wd@pollux.denx.de>
42217 Date: Sun Oct 29 01:03:51 2006 +0200
42219 Automatically adjust ARFLAGS so "make -s" is really silent.
42221 commit fae684e89844856383bdf101440889557df3e6b1
42222 Author: Stefan Roese <sr@denx.de>
42223 Date: Sat Oct 28 16:45:00 2006 +0200
42225 [PATCH] omap925.c: Remove unused functions
42227 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42228 Signed-off-by: Stefan Roese <sr@denx.de>
42230 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
42231 Author: Stefan Roese <sr@denx.de>
42232 Date: Sat Oct 28 17:12:58 2006 +0200
42234 [PATCH] Add some missing machtypes for netstar & voiceblue boards
42236 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
42239 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42240 Signed-off-by: Stefan Roese <sr@denx.de>
42242 commit 856f054410cef52d868feb330168b2a4c4091328
42243 Author: Stefan Roese <sr@denx.de>
42244 Date: Sat Oct 28 15:55:52 2006 +0200
42246 [PATCH] NAND: Partition name support added to NAND subsystem
42248 chpart, nboot and NAND subsystem related commands now accept also partition
42249 name to specify offset.
42251 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42252 Signed-off-by: Stefan Roese <sr@denx.de>
42254 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
42255 Author: Wolfgang Denk <wd@pollux.denx.de>
42256 Date: Sat Oct 28 02:29:44 2006 +0200
42260 commit 2751a95abd1b96911081c357e96a12fa97b40dee
42261 Author: Wolfgang Denk <wd@pollux.denx.de>
42262 Date: Sat Oct 28 02:29:14 2006 +0200
42264 Enable commandline editing and hush shell on all TQM boards.
42266 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
42267 Author: Wolfgang Denk <wd@pollux.denx.de>
42268 Date: Sat Oct 28 02:28:02 2006 +0200
42270 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
42272 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
42273 Author: Wolfgang Denk <wd@denx.de>
42274 Date: Sat Oct 28 01:14:32 2006 +0200
42276 Check for illegal character '=' in environment variable names.
42278 Make sure the string passed as variable name does not contain a '='
42279 character. This not only prevents the common error or typing
42280 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
42281 also closes a backdoor which allowed to delete write-protected
42282 environment variables, for example by using "setenv ethaddr=".
42284 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
42285 Author: Wolfgang Denk <wd@pollux.denx.de>
42286 Date: Sat Oct 28 00:38:39 2006 +0200
42288 Minor code cleanup.
42290 commit e11887a77d81077416a2d1c5e0354916fee8c034
42291 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
42292 Date: Thu Oct 26 17:55:31 2006 +0200
42294 Don't pass any debug options directly to the assembler
42296 When passing the -g option to gcc, gcc automatically selects a
42297 suitable --g<format> option to pass on to the assembler.
42298 Thus, there's no point in forcing a specific debug option on the
42299 assembler using the -Wa mechanism.
42301 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42303 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
42304 Author: Jon Loeliger <jdl@freescale.com>
42305 Date: Fri Oct 27 07:47:22 2006 -0500
42307 MPC86xx: Cleaned up unused and conditionally used local variables.
42309 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42311 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
42312 Author: Wolfgang Denk <wd@pollux.denx.de>
42313 Date: Fri Oct 27 11:55:21 2006 +0200
42315 Fix "ar" flags in some Makefiles to allow for silent "make -s"
42317 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
42318 Author: Ben Warren <bwarren@qstreams.com>
42319 Date: Thu Oct 26 14:38:25 2006 -0400
42321 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
42322 to a TSEC (e.g. a switch is connected via RMII) or
42323 if the PHY is defective/incorrectly configured.
42325 Signed-off-by: Ben Warren <bwarren@qstreams.com>
42327 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
42328 Author: Ben Warren <bwarren@qstreams.com>
42329 Date: Thu Oct 26 14:38:25 2006 -0400
42331 Fix TSEC driver: avoid crashes if PHY is not attached
42332 to a TSEC (e.g. a switch is connected via RMII) or
42333 if the PHY is defective/incorrectly configured.
42335 Signed-off-by: Ben Warren <bwarren@qstreams.com>
42337 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
42338 Author: Wolfgang Denk <wd@pollux.denx.de>
42339 Date: Thu Oct 26 16:24:31 2006 +0200
42343 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
42344 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
42345 Date: Wed Oct 25 15:48:59 2006 +0200
42347 Finish up support for the ATSTK1000/ATSTK1002 boards
42349 Add atstk1002_config target to Makefile and move the AVR32 section
42350 down below Blackfin so that it doesn't end up in the middle of
42353 Drop the autogenerated linker script thing for now. Will have to
42354 revisit how to handle chips with different flash and RAM layout
42357 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42359 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
42360 Author: Kumar Gala <galak@kernel.crashing.org>
42361 Date: Tue Oct 24 23:47:37 2006 -0500
42363 Added support for Multi-Image files that contain a device tree
42365 If a Multi-Image file contains a third image we try to use it as a
42366 device tree. The device tree image is assumed to be uncompressed in the
42367 image file. We automatically allocate space for the device tree in memory
42368 and provide an 8k pad to allow more than a reasonable amount of growth.
42370 Additionally, a device tree that was contained in flash will now automatically
42371 get copied to system memory as part of boot. Previously an error was
42372 reported if one tried to boot a device tree that was in flash.
42374 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42376 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
42377 Author: Wolfgang Denk <wd@denx.de>
42378 Date: Tue Oct 24 21:35:55 2006 +0200
42380 Switch to automatically generated CHANGELOG file.
42381 (use "make CHANGELOG" to update it from time to time)
42383 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
42384 Author: Stefan Roese <sr@denx.de>
42385 Date: Tue Oct 24 18:06:48 2006 +0200
42387 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
42388 Patch by Stefan Roese, 24 Oct 2006
42390 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
42391 Author: Wolfgang Denk <wd@pollux.denx.de>
42392 Date: Tue Oct 24 17:24:55 2006 +0200
42394 Merge with /home/wd/git/u-boot/master
42396 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
42397 Author: Wolfgang Denk <wd@pollux.denx.de>
42398 Date: Tue Oct 24 15:32:57 2006 +0200
42402 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
42403 Author: Wolfgang Denk <wd@pollux.denx.de>
42404 Date: Tue Oct 24 14:51:36 2006 +0200
42406 Move atstk1000 files into vendor specific directory.
42407 Patch by Haavard Skinnemoen, 12 Sep 2006
42409 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
42410 Author: Wolfgang Denk <wd@pollux.denx.de>
42411 Date: Tue Oct 24 14:42:37 2006 +0200
42413 Add ATSTK1000 and ATSTK1002 board support
42414 Patch by Haavard Skinnemoen, 06 Sep 2006
42416 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
42419 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
42420 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
42421 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
42422 CompactFlash cards. For more information, please see this page:
42424 http://www.atmel.com/dyn/products/tools.asp?family_id=682
42426 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
42429 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42431 commit f93ae788c3640fcde5db383471d45548ff4060d0
42432 Author: Wolfgang Denk <wd@pollux.denx.de>
42433 Date: Tue Oct 24 14:31:24 2006 +0200
42435 Add common serial driver for Atmel AT32 and AT91 chips
42436 Patch by Haavard Skinnemoen, 06 Sep 2006
42438 This is a first attempt at creating a common serial driver for Atmel
42439 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
42440 be possible to support AT91RM9200 and other ARM-based chips with some
42441 minor modifications.
42443 There's nothing fundamentally AVR32-specific in this driver, but it
42444 does use some features which are currently only defined for the
42446 * pm_get_clock_freq: Obtain the clock frequency of a given domain
42447 * gd->console_uart: A "struct device" containing information about
42448 register mappings, gpio resources and clocks associated with the
42451 For more information about these features, please see the "AT32AP
42454 commit 72a087e04705c26cad982879ebd06b5281bf825a
42455 Author: Wolfgang Denk <wd@pollux.denx.de>
42456 Date: Tue Oct 24 14:27:35 2006 +0200
42458 Add AT32AP CPU and AT32AP7000 SoC support
42459 Patch by Haavard Skinnemoen, 06 Sep 2006
42461 This patch adds support for the AT32AP CPU family and the AT32AP7000
42462 chip, which is the first chip implementing the AVR32 architecture.
42464 The AT32AP CPU core is a high-performance implementation featuring a
42465 7-stage pipeline, separate instruction- and data caches, and a MMU.
42466 For more information, please see the "AVR32 AP Technical Reference":
42468 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
42470 In addition to this, the AT32AP7000 chip comes with a large set of
42471 integrated peripherals, many of which are shared with the AT91 series
42472 of ARM-based microcontrollers from Atmel. Full data sheet is
42475 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
42477 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42479 commit 7b64fef33c66be648826c0ff9758298ef13d0604
42480 Author: Wolfgang Denk <wd@pollux.denx.de>
42481 Date: Tue Oct 24 14:21:16 2006 +0200
42483 Add AVR32 architecture support
42484 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
42486 This patch adds common infrastructure code for the Atmel AVR32
42487 architecture. See doc/README.AVR32 for details.
42489 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42491 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
42492 Author: Wolfgang Denk <wd@pollux.denx.de>
42493 Date: Tue Oct 24 13:57:33 2006 +0200
42495 Use -g instead of -gstabs in AFLAGS_DEBUG
42496 Patch by Haavard Skinnemoen, 30 Aug 2006
42498 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
42499 matter what the target's preferred debugging format is. This patch
42500 simply replaces -gstabs with -g, so that the default debugging format
42501 for the architecture is used.
42503 commit 965829872169c2996023840d98e1d85ad148d629
42504 Author: Wolfgang Denk <wd@pollux.denx.de>
42505 Date: Tue Oct 24 13:55:18 2006 +0200
42507 Fix/workaround broken dependency handling with make 3.81
42508 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
42510 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
42511 Author: Marian Balakowicz <m8@semihalf.com>
42512 Date: Mon Oct 23 22:17:05 2006 +0200
42514 Fix sequoia separate object direcory building problems.
42516 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
42517 Author: Jon Loeliger <jdl@freescale.com>
42518 Date: Fri Oct 20 17:16:35 2006 -0500
42520 Use generic I2C register block on 85xx and 86xx.
42522 Replace private IMMAP I2C structures with generic reg block
42523 and allow 86xx to have multiple I2C device busses.
42525 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42527 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
42528 Author: Jon Loeliger <jdl@freescale.com>
42529 Date: Fri Oct 20 15:54:34 2006 -0500
42531 Fix compilation warnings on a few 85xx boards.
42533 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42535 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
42536 Author: Jon Loeliger <jdl@freescale.com>
42537 Date: Fri Oct 20 15:50:15 2006 -0500
42539 Converted all 85xx boards to use a common FSL I2C driver.
42540 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
42541 And removed hard i2c path from a few u-boot.lds scipts too.
42542 Minor whitespace cleanups along the way.
42544 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42546 commit 4d45f69e362b05892c9e92a7907e5820995612aa
42547 Author: Jon Loeliger <jdl@freescale.com>
42548 Date: Thu Oct 19 12:02:24 2006 -0500
42550 Rewrite a series of goto statements as a sequences of
42551 conditional expressions instead.
42553 Use consistent return code 0/-1 for good/bad indicators.
42555 Include one fewer file if the driver isn't used at all.
42557 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42559 commit 7237c033b02fe295880435f1eb80819a0c987532
42560 Author: Jon Loeliger <jdl@freescale.com>
42561 Date: Thu Oct 19 11:02:16 2006 -0500
42563 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
42565 in an effort to begin to unify the umpteen FSL I2C drivers that
42566 are all otherwise very similar.
42568 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42570 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
42571 Author: Jon Loeliger <jdl@freescale.com>
42572 Date: Thu Oct 19 11:33:52 2006 -0500
42574 * Fix a bunch of compiler warnings for gcc 4.0
42576 Signed-off-by: Matthew McClintock <msm@freescale.com>
42578 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
42579 Author: Stefan Roese <sr@denx.de>
42580 Date: Tue Oct 17 06:14:31 2006 +0200
42582 Add monitor functions for indirect access to PPC440 DCR's
42583 Patch by Leonid Baryudin, 12 Oct 2006
42585 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
42586 Author: Jon Loeliger <jdl@freescale.com>
42587 Date: Fri Oct 13 16:47:53 2006 -0500
42589 Fixed leading whitespace issues.
42590 Removed spurious LAWAR thing.
42592 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42594 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
42595 Author: Jon Loeliger <jdl@freescale.com>
42596 Date: Thu Oct 12 10:42:36 2006 -0500
42598 Remove unneeded include files and local variable.
42600 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42602 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
42603 Author: Grant Likely <grant.likely@secretlab.ca>
42604 Date: Tue Oct 10 00:23:32 2006 -0600
42606 Fix possible uninitialized variable compiler warning.
42608 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
42609 do_bootm_linux() may be uninitialized. There is no possibility in the
42610 current code that len will get used uninitialized, but this fix follows
42611 the existing convention of setting both len and data to zero at the same
42614 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42616 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
42617 Author: Matthew McClintock <msm@freescale.com>
42618 Date: Wed Oct 11 15:13:01 2006 -0500
42620 * Fix a bunch of compiler warnings for gcc 4.0
42622 Signed-off-by: Matthew McClintock <msm@freescale.com>
42624 commit bf651baa365e5447246aad6a633ccd667cf24a39
42625 Author: Jon Loeliger <jdl@freescale.com>
42626 Date: Wed Oct 11 10:10:43 2006 -0500
42628 Move "ar" flags to config.mk to allow for silent "make -s"
42630 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
42631 Author: Jon Loeliger <jdl@freescale.com>
42632 Date: Tue Oct 10 17:19:03 2006 -0500
42634 Coding style changes to remove local varible blocks
42635 and reformat a bit nicer.
42637 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
42638 Author: Jon Loeliger <jdl@freescale.com>
42639 Date: Tue Oct 10 17:16:04 2006 -0500
42641 Fix whitespace issues.
42643 commit 7b382b7125f2397cce63253df62f183e3dfa2770
42644 Author: Jon Loeliger <jdl@freescale.com>
42645 Date: Tue Oct 10 17:14:45 2006 -0500
42647 Fix whitespace issues.
42649 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
42650 Author: Jon Loeliger <jdl@freescale.com>
42651 Date: Tue Oct 10 17:06:53 2006 -0500
42653 Fix whitespace issues.
42655 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
42656 Author: Jon Loeliger <jdl@freescale.com>
42657 Date: Tue Oct 10 17:03:43 2006 -0500
42659 Ran lindent and cleaned up whitespace issues.
42660 Format for 80-columns too.
42662 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
42663 Author: Jon Loeliger <jdl@freescale.com>
42664 Date: Tue Oct 10 17:02:22 2006 -0500
42666 Fix whitespace and 80-col issues.
42668 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
42669 Author: Stefan Roese <sr@denx.de>
42670 Date: Sat Oct 7 11:36:51 2006 +0200
42672 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
42673 Patch by Stefan Roese, 07 Oct 2006
42675 commit 5bc528fa4da751d472397b308137238a6465afd2
42676 Author: Stefan Roese <sr@denx.de>
42677 Date: Sat Oct 7 11:35:25 2006 +0200
42679 Update ALPR code (NAND support working now)
42680 Patch by Stefan Roese, 07 Oct 2006
42682 commit 77d5034847d328753b80c46b83f960a14a26f40e
42683 Author: Stefan Roese <sr@denx.de>
42684 Date: Sat Oct 7 11:33:03 2006 +0200
42686 Remove compile warnings in fpga code
42687 Patch by Stefan Roese, 07 Oct 2006
42689 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
42690 Author: Stefan Roese <sr@denx.de>
42691 Date: Sat Oct 7 11:30:52 2006 +0200
42693 Add CONFIG_BOARD_RESET to configure board specific reset function
42694 Patch by Stefan Roese, 07 Oct 2006
42696 commit f55df18187e7a45cb73fec4370d12135e6691ae1
42697 Author: John Traill <john.traill@freescale.com>
42698 Date: Fri Sep 29 08:23:12 2006 +0100
42700 Fix missing tCycle/modfreq calculation.
42702 Signed-off-by: John Traill <john.traill@freescale.com>
42704 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
42705 Author: Andy Fleming <afleming@freescale.com>
42706 Date: Wed Sep 13 10:33:35 2006 -0500
42708 Updated config headers to add default FDT-based booting
42710 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
42711 Author: Andy Fleming <afleming@freescale.com>
42712 Date: Wed Sep 13 10:34:18 2006 -0500
42714 Add support for eTSEC 3 & 4 on 8548 CDS
42716 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
42717 This will only work on rev 1.3 boards (but doesn't break older boards)
42718 * Cleaned up some comments to reflect the expanded role of tsec
42721 commit 084d648b109c8984f83674043c1a7fa3885ef801
42722 Author: Andy Fleming <afleming@freescale.com>
42723 Date: Wed Sep 13 10:33:56 2006 -0500
42725 Added code to support 2.6.18 PCI changes in u-boot
42727 * Added code to swizzle the IRQ map for the PCI
42729 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
42730 Author: Jon Loeliger <jdl@freescale.com>
42731 Date: Tue Sep 19 09:34:10 2006 -0500
42733 Modified makefile for new build mechanism.
42735 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42737 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
42738 Author: Jon Loeliger <jdl@freescale.com>
42739 Date: Thu Sep 14 08:40:36 2006 -0500
42741 Handle 86xx SVR values according to the new Reference Manual.
42742 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
42743 by the byte in bits 16-23 instead.
42744 Thanks to Jason Jin for noticing.
42746 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42748 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
42749 Author: Zhang Wei <wei.zhang@freescale.com>
42750 Date: Mon Aug 28 14:25:31 2006 +0800
42752 Fixed an OF-tree off-by-one bug when adding a new property name.
42753 This bug will cause the kernel booting to pause a long time.
42755 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42756 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
42758 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
42759 Author: Jon Loeliger <jdl@freescale.com>
42760 Date: Tue Aug 29 11:05:09 2006 -0500
42762 Remove trailing empty lines.
42764 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
42765 Author: Jon Loeliger <jdl@freescale.com>
42766 Date: Tue Aug 29 09:48:49 2006 -0500
42768 Remove bogus msync and use volatile asm.
42770 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
42771 Author: Jon Loeliger <jdl@freescale.com>
42772 Date: Tue Aug 29 08:17:14 2006 -0500
42774 Add myself as maintainer for MPC8641HPCN.
42776 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
42777 Author: Zhang Wei <wei.zhang@freescale.com>
42778 Date: Mon Aug 28 14:25:31 2006 +0800
42780 Fixed an OF-tree off-by-one bug when adding a new property name.
42781 This bug will cause the kernel booting to pause a long time.
42783 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42785 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
42786 Author: Haiying Wang <haiying.wang@freescale.com>
42787 Date: Fri Aug 25 14:38:34 2006 -0400
42789 Change ramdiskaddr and dtbaddr
42790 Remove PEX fluff commands.
42792 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
42793 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42795 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
42796 Author: Matthew McClintock <msm@freescale.com>
42797 Date: Wed Aug 23 13:32:45 2006 -0500
42799 * Another small fix for booting with disable_of
42801 Signed-off-by: Matthew McClintock <msm@freescale.com>
42803 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
42804 Author: Jon Loeliger <jdl@freescale.com>
42805 Date: Wed Aug 23 11:04:43 2006 -0500
42807 Cleanup and lindent new AHCI driver.
42809 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
42810 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
42811 Date: Wed Aug 23 19:15:12 2006 +0800
42813 Add AHCI define and sata support for MPC8641HPCN board.
42815 Signed-off-by:Jason Jin<jason.jin@freescale.com>
42817 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
42818 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
42819 Date: Wed Aug 23 19:10:44 2006 +0800
42821 Add AHCI support to u-boot
42823 Add AHCI support in u-boot, enable the sata disk controllers which
42824 following the AHCI protocol.
42826 Signed-off-by:Jason Jin<jason.jin@freescale.com>
42828 commit d8ea2acf5f137cae99417df4f573d036ee384668
42829 Author: Zhang Wei <wei.zhang@freescale.com>
42830 Date: Wed Aug 23 17:54:32 2006 +0800
42832 Add dtb boot-up parameter to default boot commands.
42834 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42836 commit b93775c2036b99baa390ea425c4771895bbc63c4
42837 Author: Jon Loeliger <jdl@freescale.com>
42838 Date: Tue Aug 22 18:26:08 2006 -0500
42840 Cleanup even more poorly introduced whitespace.
42842 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
42843 Author: Jon Loeliger <jdl@freescale.com>
42844 Date: Tue Aug 22 18:07:00 2006 -0500
42846 Cleanup more poorly introduced whitespace.
42848 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
42849 Author: Jon Loeliger <jdl@freescale.com>
42850 Date: Tue Aug 22 17:54:05 2006 -0500
42852 Cleanup poorly introduced whitespace.
42854 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
42855 Author: Jon Loeliger <jdl@freescale.com>
42856 Date: Tue Aug 22 12:25:27 2006 -0500
42858 General indent and whitespace cleanups.
42860 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
42861 Author: Jon Loeliger <jdl@freescale.com>
42862 Date: Tue Aug 22 12:06:18 2006 -0500
42864 General indent and whitespace cleanups.
42866 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
42867 Author: Jon Loeliger <jdl@freescale.com>
42868 Date: Tue Aug 22 10:42:21 2006 -0500
42870 Cleanup compiler warnings.
42872 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
42873 Author: Matthew McClintock <msm@freescale.com>
42874 Date: Tue Aug 22 09:31:59 2006 -0500
42876 Fix disable_of booting
42878 Signed-off-by: Matthew McClintock <msm@freescale.com>
42880 commit 87a449c8ac396420cb24260f717ea9e6faa82047
42881 Author: Matthew McClintock <msm@freescale.com>
42882 Date: Tue Aug 22 09:23:55 2006 -0500
42884 Support for FDT in uImage format, error when using FDT from flash
42886 Signed-off-by: Matthew McClintock <msm@freescale.com>
42888 commit 75c299c38369d01addd5e054b8a16217b70f4a86
42889 Author: Haiying Wang <haiying.wang@freescale.com>
42890 Date: Tue Aug 15 15:12:55 2006 -0400
42892 Unlock cache before kernel starts up for MPC86xx
42894 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
42895 Author: Haiying Wang <haiying.wang@freescale.com>
42896 Date: Tue Aug 15 15:13:15 2006 -0400
42898 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
42900 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
42901 Author: Haiying Wang <haiying.wang@freescale.com>
42902 Date: Tue Aug 15 15:12:55 2006 -0400
42904 Unlock cache before kernel starts up for MPC86xx
42906 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
42907 Author: Haiying Wang <haiying.wang@freescale.com>
42908 Date: Tue Aug 15 15:13:15 2006 -0400
42910 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
42912 commit 86c8e17f25e972a7e272950a0735fad84e082b88
42913 Author: Matthew McClintock <msm@freescale.com>
42914 Date: Wed Aug 16 13:59:47 2006 -0500
42916 * Fix disable_of booting
42918 Signed-off-by: Matthew McClintock <msm@freescale.com>
42920 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
42921 Author: Matthew McClintock <msm@freescale.com>
42922 Date: Wed Aug 16 10:54:09 2006 -0500
42924 * Support for FDT in uImage format, error when using FDT from flash
42926 Signed-off-by: Matthew McClintock <msm@freescale.com>
42928 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
42929 Author: Stefan Roese <sr@denx.de>
42930 Date: Tue Aug 15 14:22:35 2006 +0200
42932 Add initial support for the ALPR board from Prodrive
42933 NAND needs some additional testing
42934 Patch by Heiko Schocher, 15 Aug 2006
42936 commit f0ff4692ff3372dec55074a8eb444943ab095abb
42937 Author: Stefan Roese <sr@denx.de>
42938 Date: Tue Aug 15 14:15:51 2006 +0200
42940 Add FPGA Altera Cyclone 2 support
42941 Patch by Heiko Schocher, 15 Aug 2006
42943 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
42944 Author: Jon Loeliger <jdl@freescale.com>
42945 Date: Mon Aug 14 15:33:38 2006 -0500
42947 Fix BAT0 to actually be cacheable, non-guarded as documented.
42949 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42951 commit 40bc83559db5745681909fd7382ae509567e116d
42952 Author: Jon Loeliger <jdl@freescale.com>
42953 Date: Wed Aug 9 15:32:16 2006 -0500
42955 Removed MPC8641HPCN DTS source file from build.
42956 It is no longer linked into U-Boot; its sources are
42957 now located in the kernel tree.
42959 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42961 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
42962 Author: Matthew McClintock <msm@freescale.com>
42963 Date: Wed Jun 28 10:47:03 2006 -0500
42965 * Switched default PCI speed for 8540 ADS back to 33MHz
42967 * Added comments and a printf to warn that PCI-X won't
42969 Patch by Andy Fleming 17-Mar-2006
42971 Signed-off-by: Andy Fleming <afleming@freescale.com>
42973 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
42974 Author: Matthew McClintock <msm@freescale.com>
42975 Date: Wed Jun 28 10:46:35 2006 -0500
42977 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
42979 Signed-off-by: Andy Fleming <afleming@freescale.com>
42981 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
42982 Author: Matthew McClintock <msm@freescale.com>
42983 Date: Wed Jun 28 10:46:13 2006 -0500
42985 * Added VIA configuration table
42987 * Added support for PCI2 on CDS
42988 Patch by Andy Fleming 17-Mar-2006
42990 Signed-off-by: Andy Fleming <afleming@freescale.com>
42992 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
42993 Author: Matthew McClintock <msm@freescale.com>
42994 Date: Wed Jun 28 10:45:41 2006 -0500
42996 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
42998 Signed-off-by: Andy Fleming <afleming@freescale.com>
43000 commit 97074ed9655309b64231bc2cee69fe85399f8055
43001 Author: Matthew McClintock <msm@freescale.com>
43002 Date: Wed Jun 28 10:45:17 2006 -0500
43004 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
43006 Signed-off-by: Andy Fleming <afleming@freescale.com>
43008 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
43009 Author: Matthew McClintock <msm@freescale.com>
43010 Date: Wed Jun 28 10:44:49 2006 -0500
43012 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
43014 Signed-off-by: Andy Fleming <afleming@freescale.com>
43016 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
43017 Author: Matthew McClintock <msm@freescale.com>
43018 Date: Wed Jun 28 10:44:23 2006 -0500
43020 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
43022 Signed-off-by: Andy Fleming <afleming@freescale.com>
43024 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
43025 Author: Matthew McClintock <msm@freescale.com>
43026 Date: Wed Jun 28 10:43:36 2006 -0500
43028 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
43030 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43032 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
43033 Author: Matthew McClintock <msm@freescale.com>
43034 Date: Wed Jun 28 10:43:00 2006 -0500
43036 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
43038 commit 5498d90312aad9f6bdbf047986027c35b03cd163
43039 Author: Matthew McClintock <msm@freescale.com>
43040 Date: Wed Jun 28 10:42:24 2006 -0500
43042 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
43044 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
43045 Author: Matthew McClintock <msm@freescale.com>
43046 Date: Wed Jun 28 10:41:37 2006 -0500
43048 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
43050 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
43051 Author: John Traill <john.traill@freescale.com>
43052 Date: Wed Aug 9 14:33:50 2006 +0100
43054 Add Rapidio support for the MPC8641HPCN
43056 Signed-off-by: John Traill <john.traill@freescale.com>
43058 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
43059 Author: John Traill <john.traill@freescale.com>
43060 Date: Tue Aug 8 11:32:43 2006 +0100
43062 Fix caslat calculation
43064 Signed-off-by: John Traill <john.traill@freescale.com>
43066 commit 709d3073e74153278e7904a70819bbef7df50e1a
43067 Author: Jon Loeliger <jdl@freescale.com>
43068 Date: Thu Aug 3 16:17:56 2006 -0500
43070 Convert to mac-address in ethernet nodes.
43072 commit 71748af833ca1017edf1415be376366ff2937d17
43073 Author: Haiying Wang <haiying.wang@freescale.com>
43074 Date: Fri Jul 28 12:41:35 2006 -0400
43076 Correct the irq value of DUART2
43078 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
43079 Author: Haiying Wang <haiying.wang@freescale.com>
43080 Date: Fri Jul 28 12:41:41 2006 -0400
43082 Change the space size of PEX IO in README
43084 commit 239db37c94f7a92941c4465feceb867c609241c5
43085 Author: Haiying Wang <haiying.wang@freescale.com>
43086 Date: Fri Jul 28 12:41:18 2006 -0400
43088 Move get_board_sys_clk to board directory
43090 commit 492900b985439fbce1a118afde1e35def870db03
43091 Author: John Traill <john.traill@freescale.com>
43092 Date: Fri Jul 28 09:03:54 2006 +0100
43094 Fix 8641HPCN pollution
43096 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
43097 Author: John Traill <john.traill@freescale.com>
43098 Date: Fri Jul 28 08:16:06 2006 +0100
43100 Fix 8641HPCN timebase
43102 commit c86360b830f1eecd7a72208575dde4f57879faea
43103 Author: Zhang Wei <wei.zhang@freescale.com>
43104 Date: Fri Jul 28 00:01:34 2006 +0800
43106 Fixed OF device tree of mpc86xxhpcn board.
43108 The changes works in with kernel irq mapping rework.
43110 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
43112 commit bea3f28d285942bf3f7ab339ce85178ded544225
43113 Author: Haiying Wang <haiying.wang@freescale.com>
43114 Date: Wed Jul 12 10:48:05 2006 -0400
43116 Add support for reading and writing mac addresses to or from ID EEPROM.
43118 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
43119 With attached patch, we can use command "mac/mac read/mac save/"
43120 to read and write EEPROM under u-boot prompt.
43122 U-boot will calculate the checksum of EEPROM while bootup,
43123 if it is right, then u-boot will check whether the mac address
43124 of eTSEC0/1/2/3 is availalbe (non-zero).
43126 If there is mac address availabe in EEPROM, u-boot will use it,
43127 otherewise, u-boot will use the mac address defined in
43128 MPC8641HPCN.h. This matches the requirement to set unique mac address
43129 for each TSEC port.
43131 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
43132 Signed-off-by: York Sun <yorksun@freescale.com>
43134 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
43135 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
43136 Date: Thu Jul 13 10:35:10 2006 -0500
43138 Fixed initrd issue by define big RAM
43140 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
43142 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
43143 Author: Jason Jin <Jason.jin@freescale.com>
43144 Date: Fri Jul 7 10:01:45 2006 -0500
43146 We made a u-boot patch to fix the hang up issue
43147 when booting filesystem from ramdisk.
43149 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
43151 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
43152 Author: Matthew McClintock <msm@freescale.com>
43153 Date: Wed Jun 28 10:47:03 2006 -0500
43155 * Switched default PCI speed for 8540 ADS back to 33MHz
43156 * Added comments and a printf to warn that PCI-X won't
43158 Patch by Andy Fleming 17-Mar-2006
43160 Signed-off-by: Andy Fleming <afleming@freescale.com>
43162 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
43163 Author: Matthew McClintock <msm@freescale.com>
43164 Date: Wed Jun 28 10:46:35 2006 -0500
43166 * Fixed a bug where 8555 PCI code used the old variable and
43168 Patch by Andy Fleming 17-Mar-2006
43170 Signed-off-by: Andy Fleming <afleming@freescale.com>
43172 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
43173 Author: Matthew McClintock <msm@freescale.com>
43174 Date: Wed Jun 28 10:46:13 2006 -0500
43176 * Added VIA configuration table
43177 * Added support for PCI2 on CDS
43178 Patch by Andy Fleming 17-Mar-2006
43180 Signed-off-by: Andy Fleming <afleming@freescale.com>
43182 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
43183 Author: Matthew McClintock <msm@freescale.com>
43184 Date: Wed Jun 28 10:45:41 2006 -0500
43186 * Fixed PCI memory definitions
43187 Patch by Andy Fleming 17-Mar-2006
43189 Signed-off-by: Andy Fleming <afleming@freescale.com>
43191 commit 087454609e47295443af793a282cddcd91a5f49c
43192 Author: Matthew McClintock <msm@freescale.com>
43193 Date: Wed Jun 28 10:45:17 2006 -0500
43195 * Added support for initializing second PCI bus on 85xx
43196 Patch by Andy Fleming 17-Mar-2006
43198 Signed-off-by: Andy Fleming <afleming@freescale.com>
43200 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
43201 Author: Matthew McClintock <msm@freescale.com>
43202 Date: Wed Jun 28 10:44:49 2006 -0500
43204 * Added PCI-X #defines for PCI-X initialization
43205 Patch by Andy Fleming on 17-Mar-2006
43207 Signed-off-by: Andy Fleming <afleming@freescale.com>
43209 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
43210 Author: Matthew McClintock <msm@freescale.com>
43211 Date: Wed Jun 28 10:44:23 2006 -0500
43213 * Made sure the code which disables prefetch for PCI devices
43214 sets the size of the prefetch region to 0
43215 Patch by Andy Fleming on 17-Mar-2006
43217 Signed-off-by: Andy Fleming <afleming@freescale.com>
43219 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
43220 Author: Matthew McClintock <msm@freescale.com>
43221 Date: Wed Jun 28 10:43:36 2006 -0500
43223 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
43224 Patch by Jon Loeliger 17-Jan-2006
43226 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43228 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
43229 Author: Matthew McClintock <msm@freescale.com>
43230 Date: Wed Jun 28 10:43:00 2006 -0500
43232 * Removed the oftree.dts for stxxtx in light of the changes
43233 to the flat device tree handling code
43234 Patch by Matthew McClintock 26-June-2006
43236 commit 1b380ec225665e73959677f3893dc658c5925e05
43237 Author: Matthew McClintock <msm@freescale.com>
43238 Date: Wed Jun 28 10:42:24 2006 -0500
43240 * Patch to modify ft_build.c to update flat device trees in place
43241 Patch by Matthew McClintock 26-June-2006
43243 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
43244 Author: Matthew McClintock <msm@freescale.com>
43245 Date: Wed Jun 28 10:41:37 2006 -0500
43247 * Modify bootm command to support booting with flat device trees
43248 Patch by Matthew McClintock 26-June-2006
43250 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
43251 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
43252 Date: Wed Jun 28 08:43:56 2006 -0500
43254 Change Id to symbolic name for RTL8139
43256 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
43258 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
43259 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43260 Date: Tue Jun 27 18:12:10 2006 +0800
43262 Fix RTL8139 in big endian
43264 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
43265 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
43267 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
43268 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43269 Date: Tue Jun 27 18:12:23 2006 +0800
43271 Fix Tsec bug when no link
43273 When tftp a non-exist file from the tftp server, u-boot will check
43274 the link of all eth port. The original file will return wrong link
43275 state on the no link ports.
43277 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
43279 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
43280 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43281 Date: Tue Jun 27 18:12:02 2006 +0800
43283 Fix bug for io_bar size during pci scan
43285 During the pci scan process, Some devices return bar_reponse with the
43286 highest bytes 0, such as the pci bridge in uli1575 return bar_response
43287 with 0xffffff, So the bar_size should be manually set under 64K.
43289 Signed-off-by: Jason Jin <jason.jin@freescale.com>
43291 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
43292 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43293 Date: Tue Jun 27 18:11:54 2006 +0800
43295 Enable PCIE1 for MPC8641HPCN board
43297 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
43299 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
43300 Author: Wolfgang Denk <wd@pollux.denx.de>
43301 Date: Mon Jun 26 11:06:00 2006 +0200
43305 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
43306 Author: Jon Loeliger <jdl@freescale.com>
43307 Date: Thu Jun 22 08:51:46 2006 -0500
43309 Fix bug in 8641hpcn reset command with no args.
43311 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
43312 Acked-by: Jon Loeliger <jdl@freescale.com>
43314 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
43315 Author: Zhang Wei <wei.zhang@freescale.com>
43316 Date: Tue Jun 20 17:47:15 2006 +0800
43318 Reworked IRQ mapping in OF-tree.
43320 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
43321 Author: Jon Loeliger <jdl@freescale.com>
43322 Date: Thu Jun 15 21:33:37 2006 -0500
43324 Do not enable address translation on secondary CPUs.
43325 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
43327 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43329 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
43330 Author: Wolfgang Denk <wd@pollux.denx.de>
43331 Date: Wed Jun 14 18:14:56 2006 +0200
43335 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
43336 Author: Wolfgang Denk <wd@pollux.denx.de>
43337 Date: Wed Jun 14 17:45:53 2006 +0200
43339 Various USB related patches
43340 - Add support for mpc8xx USB device.
43341 - Add support for Common Device Class - Abstract Control Model USB console.
43342 - Add support for flow control in USB slave devices.
43343 - Add support for switching between gserial and cdc_acm using environment.
43344 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
43345 - Update usbcore slightly to ease host enumeration.
43346 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
43347 - Add AdderUSB_config as a defconfig to enable usage of the USB console
43348 by default with the Adder87x U-Boot port.
43349 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
43351 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
43352 Author: Jon Loeliger <jdl@jdl.com>
43353 Date: Wed Jun 7 10:53:55 2006 -0500
43355 Fix a get_board_sys_clk() use-before-def warning.
43357 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43359 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
43360 Author: Jon Loeliger <jdl@jdl.com>
43361 Date: Wed Jun 7 10:52:49 2006 -0500
43363 Allow DTC path to be passed in.
43365 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43367 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
43368 Author: Haiying Wang <haiying.wang@freescale.com>
43369 Date: Tue Jun 6 16:54:29 2006 -0400
43371 Modify the IRQ of DUART2
43373 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
43374 Author: Jon Loeliger <jdl@jdl.com>
43375 Date: Wed May 31 13:55:35 2006 -0500
43379 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43381 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
43382 Author: Jon Loeliger <jdl@jdl.com>
43383 Date: Wed May 31 12:44:44 2006 -0500
43385 White space cleanup.
43386 Some 80-column cleanups.
43387 Convert printf() to puts() where possible.
43388 Use #include "spd_sdram.h" as needed.
43389 Enhanced reset command usage message a bit.
43391 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43393 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
43394 Author: Jon Loeliger <jdl@jdl.com>
43395 Date: Wed May 31 11:39:34 2006 -0500
43397 Removed unneeded local_bus_init() from 8641HPCN board.
43399 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43401 commit 4d3d729c16c392d2982d3266b659d333c927697d
43402 Author: Jon Loeliger <jdl@jdl.com>
43403 Date: Wed May 31 11:24:28 2006 -0500
43405 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
43407 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43409 commit b2a941de060350ad15878d8219825f4950e9bb8e
43410 Author: Jon Loeliger <jdl@jdl.com>
43411 Date: Wed May 31 10:07:28 2006 -0500
43413 Remove dead debug code.
43415 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43417 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
43418 Author: Jon Loeliger <jdl@freescale.com>
43419 Date: Tue May 30 17:47:00 2006 -0500
43421 Move mpc86xx PIXIS code to board directory
43423 First cut at moving the PIXIS platform code out of
43424 the 86xx cpu directory and into board/mpc8641hpcn
43427 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43429 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
43430 Author: Markus Klotzbuecher <mk@denx.de>
43431 Date: Tue May 30 16:56:14 2006 +0200
43433 Support generic OHCI support for the s3c24x0 cpu.
43435 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
43436 Author: Haiying Wang <Haiying.Wang@freescale.com>
43437 Date: Tue May 30 09:10:32 2006 -0500
43439 Improve "reset" command's interaction with watchdog.
43441 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
43442 "reset altbank wd" will reset another bank WITH watch dog enabled
43443 "diswd" will disable watch dog after u-boot boots up successfully
43445 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43447 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
43448 Author: Haiying Wang <Haiying.Wang@freescale.com>
43449 Date: Tue May 30 08:51:19 2006 -0500
43451 Fix two SDRAM setup bugs.
43454 Enable 1T/2T based on number of DIMMs present.
43456 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43458 commit d11fec5015334deb2010e36ce00bb118cc5429a5
43459 Author: Haiying Wang <Haiying.Wang@freescale.com>
43460 Date: Fri May 26 10:24:48 2006 -0500
43462 Add first draft of the MPC8641HPCN doc/README.
43464 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43466 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
43467 Author: Haiying Wang <Haiying.Wang@freescale.com>
43468 Date: Fri May 26 10:13:04 2006 -0500
43470 Added pci@8000 block.
43471 Updated ethernet interrupt mappings (moved up 48).
43472 Cleaned up a few comments.
43474 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43476 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
43477 Author: Haiying Wang <Haiying.Wang@freescale.com>
43478 Date: Fri May 26 10:01:16 2006 -0500
43480 Allow args on reset command.
43482 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43484 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
43485 Author: Markus Klotzbuecher <mk@denx.de>
43486 Date: Tue May 23 13:38:35 2006 +0200
43488 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
43489 fixes to the latter.
43491 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
43492 Author: Markus Klotzbuecher <mk@denx.de>
43493 Date: Tue May 23 10:33:11 2006 +0200
43495 More cleanup for the delta board and the generic usb_ohci driver. Added
43496 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
43497 initialization and cleanup hooks respectively.
43499 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
43500 Author: Markus Klotzbuecher <mk@denx.de>
43501 Date: Mon May 22 16:33:54 2006 +0200
43503 This patch adds USB storage support for the delta board. This is the first
43504 board to make use of a generic OHCI driver, that calls hooks for board
43505 dependant initialization.
43507 commit 14e37081ff3cac7ebe6e93836523429853b6b292
43508 Author: Jon Loeliger <jdl@jdl.com>
43509 Date: Fri May 19 13:28:39 2006 -0500
43511 Change arbitration to round-robin for SMP linux.
43513 commit 9a655876e5995be80f49054e2509500e871e4d3a
43514 Author: Jon Loeliger <jdl@jdl.com>
43515 Date: Fri May 19 13:26:34 2006 -0500
43517 Enable dual DDR controllers and interleaving.
43519 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
43520 Author: Jon Loeliger <jdl@jdl.com>
43521 Date: Fri May 19 13:22:44 2006 -0500
43523 Update 86xx address map and LAWBARs.
43525 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
43526 Author: Jon Loeliger <jdl@jdl.com>
43527 Date: Fri May 19 13:14:15 2006 -0500
43529 Remove L2 Cache invalidate polling.
43531 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
43532 Author: Jon Loeliger <jdl@jdl.com>
43533 Date: Fri May 19 12:33:09 2006 -0500
43535 Enable 2nd CPU and I2C.
43537 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
43538 Author: Jon Loeliger <jdl@freescale.com>
43539 Date: Mon May 15 07:26:56 2006 -0500
43541 Update interrupt mapping.
43543 commit 6cfea33477b04b63ed47386ed1629529484c33ba
43544 Author: Haiying Wang <Haiying.Wang@freescale.com>
43545 Date: Wed May 10 09:38:06 2006 -0500
43547 Remove unneeded INIT_RAM_LOCK cache twiddling.
43548 Correctly tracks r29 as global data pointer now.
43550 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43552 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
43553 Author: Jon Loeliger <jdl@freescale.com>
43554 Date: Wed May 10 09:33:07 2006 -0500
43556 Remove unnecessary flash.c file.
43558 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
43559 Author: Jon Loeliger <jdl@freescale.com>
43560 Date: Tue May 9 08:23:49 2006 -0500
43562 Get MPC8641HPCN flash images working.
43564 Enable the CFI driver.
43565 Remove bogus LAWBAR7 cruft.
43566 Use correct TEXT_BASE, Fixup load script.
43567 Enable SPD EEPROM during DDR setup.
43568 Use generic RFC 1918 IP addresses by default.
43570 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
43571 Author: Jon Loeliger <jdl@freescale.com>
43572 Date: Thu Apr 27 10:15:16 2006 -0500
43574 Cleanup whitespaces and style issues.
43575 Removed //-style comments.
43576 Use 80-column lines.
43577 Remove trailing whitespace.
43578 Remove dead code and debug cruft.
43580 commit a2320a6bf8113a09544c42d160d10ac69d049a03
43581 Author: Jon Loeliger <jdl@freescale.com>
43582 Date: Thu Apr 27 08:22:39 2006 -0500
43584 Revert bad PCI prefetch limit change.
43586 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
43587 Author: Jon Loeliger <jdl@freescale.com>
43588 Date: Wed Apr 26 17:58:56 2006 -0500
43590 Initial support for MPC8641 HPCN board.