1 commit f4317ea91942f44cc1c433277927b61618e9b0a5
2 Author: Daniel Mack <daniel@caiaq.de>
3 Date: Tue May 5 12:48:29 2009 +0200
5 ARM: fix PXA build by defining UP2OCR
7 U-Boot does not currently build for PXA platforms with USB support
10 usb.c:46: error: 'UP2OCR' undeclared (first use in this function)
12 Signed-off-by: Daniel Mack <daniel@caiaq.de>
13 Cc: Markus Klotzbuecher <mk@denx.de>
15 Edited commit message.
16 Signed-off-by: Wolfgang Denk <wd@denx.de>
18 commit e26ad0eabd10a8cda51920fbcfe4da5b4ccf0c98
19 Author: Wolfgang Denk <wd@denx.de>
20 Date: Fri May 15 22:32:57 2009 +0200
22 Minor Coding Style fix; update CHANGELOG.
24 Signed-off-by: Wolfgang Denk <wd@denx.de>
26 commit af75a45d23b72a59ac5cc0427696c7f634fdc94b
27 Author: Wolfgang Denk <wd@denx.de>
28 Date: Fri May 15 09:27:58 2009 +0200
30 IDE: bail out of dev_print() for unknown device types
32 Commit 574b319512 introduced a subtle bug by mixing a list of tests
33 for "dev_desc->type" and "dev_desc->if_type" into one switch(), which
34 then mostly did not work because "dev_desc->type" cannot take any
35 "IF_*" type values. A later fix in commit 8ec6e332ea changed the
36 switch() into testing "dev_desc->if_type", but at this point the
37 initial test for unknown device types was completely lost, which
38 resulted in output like that for IDE ports without device attached:
40 Device 1: Model: Firm: Ser#:
42 Capacity: not available
44 This patch re-introduces the missing test for unknown device types.
46 Signed-off-by: Wolfgang Denk <wd@denx.de>
47 Cc: Stefan Roese <sr@denx.de>
48 Cc: Detlev Zundel <dzu@denx.de>
49 Tested-by: Stefan Roese <sr@denx.de>
51 commit c21f62d8483fbab44cd98d93ff2e9355a330d225
52 Author: Stefan Roese <sr@denx.de>
53 Date: Thu May 14 07:25:13 2009 +0200
55 74xx_7xx: Fix rounding problem in CPU frequency calculation
57 This patch fixes a problem in the CPU frequency calculation. Without it
58 a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz.
60 Signed-off-by: Stefan Roese <sr@denx.de>
62 commit 3ad8a0517b724782ab36f2b554a94de4c00c1adb
63 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
64 Date: Wed May 13 22:24:12 2009 +0200
66 console.h: remove unused prototype 'console_realloc'
68 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
70 commit 84bf7ca522e94ec402a1264b01971b924b7e268f
71 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
72 Date: Wed May 13 22:16:31 2009 +0200
74 api: remove un-needed ifdef CONFIG_API already handle by the Makefile
76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
78 commit 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80
79 Author: Detlev Zundel <dzu@denx.de>
80 Date: Wed May 13 10:54:10 2009 +0200
82 Fix e-mail address of Gary Jennejohn.
84 Signed-off-by: Detlev Zundel <dzu@denx.de>
86 commit 5e2c08c3ac90808e9be64856916bfd6df984823c
87 Author: Emil Medve <Emilian.Medve@Freescale.com>
88 Date: Tue May 12 13:48:32 2009 -0500
90 Remove inline qualifier from show_boot_progress()
92 The 'inline' is conflicting with the semantic of 'weak' attribute and with the
93 way the show_boot_progress() function is used.
95 Also gcc 4.4 is complaining about it:
97 main.c:51: error: inline function 'show_boot_progress' cannot be declared weak
99 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
101 commit fe6da4837308aa33d537ac3e7f36c2d66e3d9a36
102 Author: Wolfgang Denk <wd@denx.de>
103 Date: Tue May 12 15:17:35 2009 +0200
105 MPC8260: fixup device tree by property instead of path
107 cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
108 clock frequencies in the device tree, using a CPU path
109 "/cpus/OF_CPU", with OF_CPU beind defined in the board config file.
111 However, this does not work when one board config file (here:
112 MPC8260ADS.h) is intended to be used for several diffrent CPUs and
113 therefor contains a generic definition like "cpu@0", as the device
114 trees that will then be loaded will contain specific names like
117 We switch to using do_fixup_by_prop_u32() instead, so we can search
118 for device_type="cpu", as it is done in other architectures, too.
120 Signed-off-by: Wolfgang Denk <wd@denx.de>
121 Cc: Heiko Schocher <hs@denx.de>
122 Acked-by: Heiko Schocher <hs@denx.de>
123 Tested-by: Heiko Schocher <hs@denx.de>
125 commit 12a6753155716e5c3c181a8f40e8b2d3d669aefd
126 Author: Rohit Hagargundgi <h.rohit@samsung.com>
127 Date: Mon Mar 9 19:45:46 2009 +0530
129 Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
131 Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
132 CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
133 and is used by OneNAND ipl when reading U-Boot image.
135 Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
136 Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
138 commit c404cc5884b0c82fd82d751dbd8e8b3f8919a23a
139 Author: Ben Warren <biggerbadderben@gmail.com>
140 Date: Tue Apr 28 17:04:51 2009 -0700
142 Schedule removal of non-CONFIG_NET_MULTI net driver API
144 This will make CONFIG_NET_MULTI the only net driver configuration and
145 we'll be able to remove this option.
147 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
149 commit 60bbcf0cc6e55095dd186e59a557d584b9b56eb1
150 Author: Detlev Zundel <dzu@denx.de>
151 Date: Tue May 5 16:04:06 2009 +0200
153 powerpc/inka4x0: Remove left-over ide reset code.
155 The pin which was used in preliminary versions of the board for ide
156 reset is really connected to the rtc clock.
158 Signed-off-by: Detlev Zundel <dzu@denx.de>
160 commit f578a2da6770951239ad91ee9a1875fdc71dbe48
161 Author: Marco Stornelli <marco.stornelli@gmail.com>
162 Date: Tue Apr 28 19:04:02 2009 +0200
164 Add imls utility command
166 This patch adds, under tools folder, a new command called imls. Its
167 goal is the same of UBoot's imls but it can be used as Linux shell
168 command. It reads from raw mtd partition and prints the list of the
171 Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
173 commit da95427ce431908714ae5e9f663ee6e2bc3bcc33
174 Author: Heiko Schocher <hs@denx.de>
175 Date: Tue Apr 28 08:36:11 2009 +0200
177 netloop: updates for NetLoop
179 Fix some issues introduced from commit:
180 2f70c49e5b9813635ad73666aa30f304c7fdeda9
181 suggested by Mike Frysinger.
183 - added some comment for the env_id variable in common_cmd_nvedit.c
184 - moved some variables in fn scope instead of file scope
185 - NetInitLoop now static void
187 Signed-off-by: Heiko Schocher <hs@denx.de>
188 Acked-by: Ben Warren <biggerbadderben@gmail.com>
190 commit 3c1d89545de11822f8b5afb5646a57757620bd95
191 Author: Heiko Schocher <hs@denx.de>
192 Date: Tue Apr 28 07:48:39 2009 +0200
194 82xx, ids8247: added ids8247 board to MAKEALL script
196 Signed-off-by: Heiko Schocher <hs@denx.de>
198 commit 890a017a8a995c921d1e889d360e8d6538ceecfe
199 Author: Detlev Zundel <dzu@denx.de>
200 Date: Thu May 7 13:08:55 2009 +0200
202 arm/imx31_phycore: Fix bi_arch_number
204 Signed-off-by: Detlev Zundel <dzu@denx.de>
205 Cc: Sascha Hauer <s.hauer@pengutronix.de>
207 commit ee47bfabefeb25bdfc83f49ef3bae0f325d3e69e
208 Author: Sascha Hauer <s.hauer@pengutronix.de>
209 Date: Fri May 15 10:21:33 2009 +0200
211 remove myself as phycore/litekit Maintainer
213 I never acked a patch that adds me as phycore i.MX31 maintainer nor was
214 it me who pushed the patches, so remove myself from the maintainer list
215 so that other people do not longer wait for my ack.
217 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
219 commit c63254ef5628efe1c77cb2fdba20753f9666f55d
220 Author: Sergey Lapin <slapin@ossfans.org>
221 Date: Tue May 12 12:25:14 2009 +0400
225 AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
226 Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
229 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
231 commit f8ddcd58221cab63dd25c2324dd2032487f748b1
232 Author: Graf Yang <graf.yang@analog.com>
233 Date: Tue May 5 02:26:27 2009 -0400
235 Blackfin: bf518f-ezbrd: reset ethernet PHY during init
237 We don't know what state the ethernet PHY is in when starting up, so make
238 sure we set it to a sane state. This fixes troubles seen when Linux boots
239 up, configures the PHY is a non-default state, and then the system reboots
240 into U-Boot which previously expected a reset state only.
242 Signed-off-by: Graf Yang <graf.yang@analog.com>
243 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
245 commit 53310b88eaa27fb5cb83144d0b22389190ad87a1
246 Author: Mike Frysinger <vapier@gentoo.org>
247 Date: Tue May 5 01:35:41 2009 -0400
249 Blackfin: bf527-ezkit: fix SPI flash env params
251 The BF527-EZKIT settings for storing the environment in SPI flash wasn't
252 using the correct sector settings for the SPI flash part that is actually
255 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
257 commit f58bf804a14324c6c9186a7a664fa23281780e8b
258 Author: Mike Frysinger <vapier@gentoo.org>
259 Date: Fri Apr 24 23:54:19 2009 -0400
261 Blackfin: avoid get_sclk() with early serial debug
263 When the clock functions were changed to use cached values (and thereby
264 avoiding expensive math functions), early serial debug broke because the
265 baud programming is called before external memory is available.
267 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
269 commit 02778f2f1b4b1a28b492367477db27c58d45ae35
270 Author: Mike Frysinger <vapier@gentoo.org>
271 Date: Fri Apr 24 23:39:41 2009 -0400
273 Blackfin: fix booting with older bootroms (no EVT1)
275 When dropping jump block support, the assumption was that all bootroms
276 supported entry point redirection via the EVT1 register. Unfortunately,
277 this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
278 and older and BF561). No one really noticed earlier because these parts
279 usually are booted by bypassing the bootrom entirely, and older BF533
280 parts are not supported at all (too many anomalies).
282 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
284 commit af2c37378f203857d5e6c957e77a14c2da5b59d2
285 Author: Mike Frysinger <vapier@gentoo.org>
286 Date: Fri Apr 24 23:22:48 2009 -0400
288 Blackfin: recurse with early serial initcode
290 Make sure we recurse through serial_putc() rather than bang on the UART
291 transmit register directly to avoid hardware overflows when using \n.
293 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
295 commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78
296 Author: Wolfgang Denk <wd@denx.de>
297 Date: Fri May 1 21:59:12 2009 +0200
303 Signed-off-by: Wolfgang Denk <wd@denx.de>
305 commit 6b2beb5626a143ca5347e7d2c6005be9936c1fbb
306 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
307 Date: Fri May 1 15:38:06 2009 +0200
309 at91: remove lowlevel_init.S
311 lowlevel_init.S is not used any more so remove it.
312 As consequence, we also don't have to generate u-boot.lds
313 but can use a static version as before.
315 This also fixes the out-of-tree build problem introduced
316 with commit f0a2c7b4 "at91: add support for the PM9263 board"
318 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
319 Signed-off-by: Wolfgang Denk <wd@denx.de>
321 commit 0ee7a310479640ef17ce2fc0f6c13cf7961d2330
322 Author: Wolfgang Denk <wd@denx.de>
323 Date: Fri May 1 00:16:11 2009 +0200
325 Update CHANGELOG; minor coding style cleanup.
327 Signed-off-by: Wolfgang Denk <wd@denx.de>
329 commit d3a513c23ba4100d6983161cdc1f747dfd087bbd
330 Author: Manikandan Pillai <mani.pillai@ti.com>
331 Date: Tue Apr 21 17:29:05 2009 +0200
333 OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
335 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
336 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
338 commit ac9140037a84629c5583066ff1a177396c47d89d
339 Author: Dirk Behme <dirk.behme@googlemail.com>
340 Date: Fri Apr 17 14:27:56 2009 +0200
342 OMAP3: Beagle: Set pinmux conditionally for Rev C boards
344 The Beagle Rev C boards pull UART2 from an alternate set of balls.
346 Signed-off-by: Steve Sakoman <steve@sakoman.com>
347 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
349 commit c1a0fd5f2864e9d381f4a3dc948942cac974e89a
350 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
351 Date: Mon Apr 27 18:33:33 2009 +0200
353 ubifs: BUG: Blocks commpressed with zlib
355 Blocks compressed with zlib dont have the full gzip header.
357 Without this patch, block compressed with zlib cannot be readed!
359 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
361 commit 35f6a943f7d92145d607c1d55f5c2e2eae5be630
362 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
363 Date: Mon Apr 27 18:33:32 2009 +0200
365 lib_generic: gunzip: New function zunzip
369 gunzip: Find the end of the header and call zunzip.
370 zunzip: Inflate gunzip block without header.
372 UBI fs blocks can be compresed in lzo, zlib or no-compression. The
373 current implementation of u-boot supported all the compressions but
374 there was a bug in the implementation of the zlib blocks.
376 UBIFS's Zlib blocks do not have header but they were compressed using
377 gunzip, a function used to decompress gunzip files/sectors with a
380 This patch adds a new function zunzip that uncompress a zlib block with
383 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
385 commit a1e5f93185d0d85a4b3fad3b6c743cddcd373b0c
386 Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
387 Date: Thu Apr 23 15:37:16 2009 +0200
389 at91: fixed plla calc when no USB support is active
391 Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
392 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
394 commit 3791a1187c1401c33c9512595e6e89dbb46230c5
395 Author: Ladislav Michl <ladis@linux-mips.org>
396 Date: Wed Apr 22 01:12:04 2009 +0200
398 arm925t: Fix CONFIG_SYS_HZ to 1000
400 Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
403 Changes since original version:
404 * Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
405 improve timer resolution.
407 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
409 commit 42bf4b2248146abdc592bde0009c6ea42067f437
410 Author: Dirk Behme <dirk.behme@googlemail.com>
411 Date: Tue Apr 14 20:15:17 2009 +0200
413 OMAP3: Remove legacy NAND defines
415 Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
417 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
419 commit cba0b778dd5f1ea32959b6825c7f0a31501a99d5
420 Author: Sanjeev Premi <premi@ti.com>
421 Date: Mon Apr 27 21:27:54 2009 +0530
423 OMAP3: Print correct silicon revision
425 The function display_board_info() displays incorrect
426 silicon revision - based on the return value from
427 function get_cpu_rev().
429 This patch fixes the problem.
431 Signed-off-by: Sanjeev Premi <premi@ti.com>
433 commit 90006e9b33bcdbf241b0295d186e3634137907a9
434 Author: Sanjeev Premi <premi@ti.com>
435 Date: Mon Apr 27 21:27:44 2009 +0530
437 OMAP3: Remove unused board-types
439 The board-types defined in struct omap3_sysinfo seem to be
440 unused. The function display_board_info() is passed
441 board type as an argument; which is ignored.
443 This patch removes all uses of board-type, related definitions
446 Signed-off-by: Sanjeev Premi <premi@ti.com>
448 commit 6a6b62e3aa4b340c4f8fc67b1487ddb5436c684d
449 Author: Sanjeev Premi <premi@ti.com>
450 Date: Mon Apr 27 21:27:27 2009 +0530
452 OMAP3: Use functions print_cpuinfo() and checkboard()
454 Use the functions print_cpuinfo() and checkboard() to
455 display the cpu and board specific information.
457 These functions reuse content from the existing function
458 display_board_info() - which has been removed.
460 Also, updated the existig OMAP3 configurations to
462 - CONFIG_DISPLAY_CPUINFO
463 - CONFIG_DISPLAY_BOARDINFO
465 Signed-off-by: Sanjeev Premi <premi@ti.com>
467 commit f8e2b3107ee00f2782f8ebf47e3f09cda4e2353a
468 Author: Stefan Roese <sr@denx.de>
469 Date: Wed Mar 18 11:17:37 2009 +0100
471 MTD: Change cfi-mtd to accept non-uniform sector sizes
473 With this patch non-uniform NOR FLASH chips (chips with multiple erase
474 regions) can be exported via the cfi-mtd layer and therefor used by UBI.
475 We select the largest sector size as erasesize. The cfi driver will make
476 sure that the smaller sectors are handled correctly.
478 Signed-off-by: Stefan Roese <sr@denx.de>
480 commit 3dcbe628d66b648e954bc8147d4faff2983206d9
481 Author: Anatolij Gustschin <agust@denx.de>
482 Date: Thu Apr 23 12:35:22 2009 +0200
484 video: fix bug in cfb_console.c code
486 Fix bug in drawing long version/info strings:
487 U-Boot version string like
488 "U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
489 is long and doesn't wrap around correctly while drawing
490 beside the logo. Such long strings partially overwrite
491 the logo. This patch is an attempt to fix it.
493 Signed-off-by: Anatolij Gustschin <agust@denx.de>
495 commit 4d9eab89b3b2c2ed432b14d355a56f274d8aac75
496 Author: Wolfgang Denk <wd@denx.de>
497 Date: Tue Apr 28 08:50:31 2009 +0200
499 cmd_ext2.c: fix compile warnings
501 Get rid of these warnings:
503 cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
504 cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'
506 Signed-off-by: Wolfgang Denk <wd@denx.de>
508 commit 28afe0160f87ff74574150d703055a965f91422a
509 Author: Heiko Schocher <hs@denx.de>
510 Date: Mon Apr 27 10:48:20 2009 +0200
512 ids8247: Remove legacy NAND defines
514 because legacy NAND support is deprecated converting to current
515 NAND interface. !This just compile, because I have no more the
518 Signed-off-by: Heiko Schocher <hs@denx.de>
520 commit dbd33614404b65aa441c5620c3dbd560c4460c09
521 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
522 Date: Mon Apr 27 09:13:31 2009 +0200
524 ubifs: BUG realpath string must be ended with NULL
526 If the memory used to copy the link_make is "dirty" the string wont
527 be ended with NULL, throwing out multiple memory bugs.
529 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
530 Acked-by: Stefan Roese <sr@denx.de>
532 commit 65351a8793c51f3787efbbcf3aa1df0ad543c127
533 Author: Peter Tyser <ptyser@xes-inc.com>
534 Date: Fri Apr 24 15:59:56 2009 -0500
536 bmp_logo: Check return value of fread()
538 Add basic error handling to fread() function calls. This prevents
539 compililation warnings such as:
541 bmp_logo.c: In function ‘main’:
542 bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
543 attribute warn_unused_result
546 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
548 commit eea8be86d1c2b570660d1f6c553845e13164231a
549 Author: Peter Tyser <ptyser@xes-inc.com>
550 Date: Fri Apr 24 15:59:46 2009 -0500
552 ncb: Check return value of write()
554 This prevents the compilation warning:
556 ncb.c: In function 'main':
557 ncb.c:32: warning: ignoring return value of ‘write’, declared with
558 attribute warn_unused_result
560 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
562 commit dbe29e36a4c2775b69b5a63b0ce2bac89c08e691
563 Author: Stefan Roese <sr@denx.de>
564 Date: Fri Apr 24 15:59:35 2009 +0200
566 mtd: nand/onenand: Register mtd device upon device scanning
568 With this patch the NAND and OneNAND devices are registered in the MTD
569 subsystem and can then be referenced by the mtdcore code (e.g.
570 get_mtd_device_nm()). This is needed for the new "ubi part" command
571 syntax without the flash type parameter (nor|nand|onenand).
573 Signed-off-by: Stefan Roese <sr@denx.de>
575 commit 10bb62d85a0850dbad1fdd34123378686373f166
576 Author: Stefan Roese <sr@denx.de>
577 Date: Fri Apr 24 15:58:33 2009 +0200
579 mtd: nand: Include linux/mtd/partitions.h in nand_base.h
581 This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
584 nand_base.c: In function 'nand_release':
585 nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'
587 Signed-off-by: Stefan Roese <sr@denx.de>
589 commit 2d579e5060413af5a740cb396dc87e1ff31bf5a9
590 Author: Stefan Roese <sr@denx.de>
591 Date: Fri Apr 24 20:24:19 2009 +0200
593 ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part"
595 This patch removes the now unnecessary flash type parameter from the
596 "ubi part" command. Currently the user has to define the type of flash
597 he will be using UBI on. Example:
599 => ubi part nor partition1
601 With this patch this type parameter is not needed anymore. The user can
602 now select the partition directly without the flash type paramter.
605 => ubi part partition1
607 This breaks backward compatibility right now because of the change in the
608 command syntax. But UBI support is still quite fresh and the advantage of
609 this new command is syntax big enough for this change. Additionally the
610 code is much cleaner now.
612 Signed-off-by: Stefan Roese <sr@denx.de>
613 CC: Kyungmin Park <kyungmin.park@samsung.com>
615 commit 294f10ca9ea82a15e135dcb0fc658382ab206940
616 Author: Detlev Zundel <dzu@denx.de>
617 Date: Thu Apr 23 13:14:20 2009 +0200
619 mips/vcth: Use generic 16550 uart driver
621 As the common code also handles baudrate switching, which the board
622 specific vct.c driver did not support, this is one of the rare
623 occassions where deleting code actually adds a feature :)
625 Signed-off-by: Detlev Zundel <dzu@denx.de>
626 Acked-by: Stefan Roese <sr@denx.de>
627 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
629 commit 0c8a84916c5dacccdc5b27b63fc463e9f3b04f07
630 Author: Ladislav Michl <ladis@linux-mips.org>
631 Date: Tue Apr 21 02:26:31 2009 +0200
633 Separate mtdparts command from jffs2
635 On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
636 > Currently the mtdparts commands are included in the jffs2 command support.
637 > This doesn't make sense anymore since other commands (e.g. UBI) use this
638 > infrastructure as well now. This patch separates the mtdparts commands from
639 > the jffs2 commands making it possible to only select mtdparts when no JFFS2
642 One more leftover... Let nboot command know about partitions even if JFFS2
643 support is not enabled.
645 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
646 Acked-by: Stefan Roese <sr@denx.de>
648 commit 67c2e57c0875139dbfcd6f41c43e6ad0cb2e40c9
649 Author: Peter Tyser <ptyser@xes-inc.com>
650 Date: Mon Apr 20 11:22:13 2009 -0500
652 cmd_ide: Remove unused AmigaOneG3SE code
654 The output_data_short() and input_data_short() functions for the
655 AmigaOneG3SE are unused and result in compiler warnings.
657 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
659 commit c93c102ace00764a56dbdf78bac134a23906721e
660 Author: Peter Tyser <ptyser@xes-inc.com>
661 Date: Mon Apr 20 11:21:40 2009 -0500
663 AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition
665 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
667 commit 54e822f9590cc6c70411bd8cabd42236e07a2aa7
668 Author: Peter Tyser <ptyser@xes-inc.com>
669 Date: Mon Apr 20 11:09:05 2009 -0500
671 Replace __asm references with __asm__
673 __asm__ follows gcc's documented syntax and is generally more common
674 than __asm. This change is only asthetic and should not affect
677 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
679 commit f9a109b3adc5e8647535357500e2a38f0558b5c2
680 Author: Peter Tyser <ptyser@xes-inc.com>
681 Date: Mon Apr 20 11:08:46 2009 -0500
683 Replace __attribute references with __attribute__
685 __attribute__ follows gcc's documented syntax and is generally more
686 common than __attribute. This change is only asthetic and should not
687 affect functionality.
689 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
691 commit 08f077da9298ff65cc6f85f90d2770000a1beee9
692 Author: David Brownell <dbrownell@users.sourceforge.net>
693 Date: Thu Apr 16 19:55:48 2009 -0700
695 mtdpart command: align output columns
697 Make the headers in the "mtdparts" command output line up
698 with their columns ... strike the extra TAB character.
700 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
702 commit 06f41f825c23344d889d5419bb5eaeceb3ed2a02
703 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
704 Date: Thu Apr 16 10:51:03 2009 +0900
708 sa1100.h is not used anywhere, then remove it.
710 $ find . -name '*.h' -empty -print
712 $ git grep 'sa1100.h' .
715 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
716 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
718 commit 7d3d30b1b3fbd0a07db254ead99fa6fff4f4d992
719 Author: Stefan Roese <sr@denx.de>
720 Date: Tue Apr 14 17:51:21 2009 +0200
722 UBIFS: Remove tnc_commit.c which is not used in the read-only version
724 I missed removing this file while implementing the UBIFS support. It's
725 not referenced at all, so let's remove it. Thanks to Artem Bityutskiy
728 Signed-off-by: Stefan Roese <sr@denx.de>
730 commit 6356daff70867822bdb23cea49f98e65421a25b8
731 Author: Adrian Hunter <adrian.hunter@nokia.com>
732 Date: Tue Apr 14 17:50:38 2009 +0200
734 UBIFS: fix recovery bug
736 UBIFS did not recovery in a situation in which it could
737 have. The relevant function assumed there could not be
738 more nodes in an eraseblock after a corrupted node, but
739 in fact the last (NAND) page written might contain anything.
740 The correct approach is to check for empty space (0xFF bytes)
743 Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
744 Signed-off-by: Stefan Roese <sr@denx.de>
746 commit 351f40caf2f7806b2cefb93e077ea619b9f684e8
747 Author: Gao Guanhua <B22826@freescale.com>
748 Date: Tue Apr 14 14:37:35 2009 +0800
750 fs: Fix the wrong type of var
752 The filelen should be signed type, not unsigned type.
753 otherwise, The condition as below never take.
756 Signed-off-by: Gao Guanhua <B22826@freescale.com>
757 Signed-off-by: Dave Liu <daveliu@freescale.com>
759 commit 05f474c4d0469bebc0bb05df60a39dc7fdf28e62
760 Author: Wolfgang Denk <wd@denx.de>
761 Date: Tue Apr 28 00:29:34 2009 +0200
765 Signed-off-by: Wolfgang Denk <wd@denx.de>
767 commit ad74cae9ff8790727bc81ee91c6bca7d50dca446
768 Author: David Brownell <dbrownell@users.sourceforge.net>
769 Date: Thu Apr 16 23:15:15 2009 -0700
771 dm9000 EEPROM reading bugfix
773 Make the U-Boot dm9000 driver read addresses from EEPROM just
774 like Linux does ... read six bytes, instead of reading twelve
775 bytes and then discarding every other one.
777 Using the right Ethernet address is a big win.
779 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
780 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
781 Acked-by: Ben Warren <biggerbadderben@gmail.com>
783 commit d4c02e6f5d49880123e7f584b88f857ffd874381
784 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
785 Date: Wed Feb 25 14:27:24 2009 +0900
787 rtl8169: fix cache coherency problem
789 Fix the problem that cannot access actual data when CPU data cache enabled.
791 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
792 Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
793 Acked-by: Ben Warren <biggerbadderben@gmail.com>
795 commit a85693b3bd4431b05b7df608b6f7733c0f80c53e
796 Author: Dirk Behme <dirk.behme@googlemail.com>
797 Date: Tue Apr 21 17:30:51 2009 +0200
799 OMAP3: Fix changed mmc init command
801 In recent U-Boot mmcinit changed to mmc init.
803 Signed-off-by: Steve Sakoman <steve@sakoman.com>
804 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
806 commit 34b76a14f676bc6501c27a96564e4dfb4793f033
807 Author: Wolfgang Denk <wd@denx.de>
808 Date: Sun Apr 26 20:39:26 2009 +0200
810 lib_arm/board.c: remove misleading "test-only" comment.
812 For a long time, the print_cpuinfo() declaration in lib_arm/board.c
813 had been marked as "test-only", which is plain wrong considering
814 current usage. Delete this misleading comment.
816 Signed-off-by: Wolfgang Denk <wd@denx.de>
818 commit 7239c5da5e9197accb3dfe395be4502c3b9bca8e
819 Author: David Brownell <dbrownell@users.sourceforge.net>
820 Date: Sun Apr 12 15:40:16 2009 -0700
822 minor DaVinci clock cleanup
824 Minor cleanup to clock-related defines for DaVinci DM6446 boards:
826 - CONFIG_SYS_CLK_FREQ is unused; remove it.
828 - CONFIG_SYS_NS16550_CLK must be the same as CONFIG_SYS_HZ_CLOCK
830 On DM6446 both of those peripheral clocks actually come from the
831 same source, the primary oscillator. Having them use the same
832 symbol avoids bugs in the clone'n'modify development cycle.
834 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
836 commit ffd8c7170d55c34bbfcfd2c84093dcaff796cbf3
837 Author: Minkyu Kang <mk7.kang@samsung.com>
838 Date: Mon Apr 6 19:59:29 2009 +0900
840 s3c64xx: remove unnecessary definition
842 CONFIG_S3C6400 is must defined at config header file
843 That definition is unnecessary at this file
845 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
847 commit 14b9308d511b53042ef478936e367a67282df66a
848 Author: Heiko Schocher <hs@denx.de>
849 Date: Fri Apr 24 06:50:45 2009 +0200
851 83xx: searching "muram-data" by compatible property
853 if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU
854 in the muram-data node, the reg entry needs to be updated.
855 This is done in fdt_fixup_muram(), but we should use
856 the compatible "fsl,qe-muram-data" for searching the
857 node instead of searching the muram-data node with
860 Signed-off-by: Heiko Schocher <hs@denx.de>
861 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
863 commit 8e15088794807944b221c11609d36789efc7f767
864 Author: Anatolij Gustschin <agust@denx.de>
865 Date: Thu Apr 23 21:29:34 2009 +0200
867 mpc83xx: MPC8360ERDK: fix environment offset configuration bug
869 The size of U-Boot binary for MPC8360ERDK increased
870 (> 2 flash sectors now), so 'saveenv' will partially
871 overwrite U-Boot in flash and will brick the board.
872 This patch moves environment offset to fourth flash
873 sector and also fixes CONFIG_SYS_MONITOR_LEN.
875 Signed-off-by: Anatolij Gustschin <agust@denx.de>
876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
878 commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc
879 Author: Michael Zaidman <michael.zaidman@gmail.com>
880 Date: Sat Apr 4 01:43:00 2009 +0300
882 NetLoop initialization bug
884 The patch fixes the bug of partial initialization of global network
887 Upon u-boot's start up the first ping command causes a failure of the
888 consequent TFTP command. It happens in the recently added mechanism of
889 the NetLoop initialization where initialization of global network
890 parameters is separated in the NetInitLoop routine which is called per
891 env_id change. Thus, ping request will initialize the network parameters
892 necessary for ping operation only, afterwards the env_changed_id will be
893 set to the env_id that will prevent all following initialization requests
894 from other protocols.
895 The problem is that the initialized by ping subset of network parameters
896 is not sufficient for other protocols and particularly for TFTP which
897 requires the NetServerIp also.
899 Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
900 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
902 commit b11f664f52c2855990107c18f242223377183575
903 Author: Timur Tabi <timur@freescale.com>
904 Date: Thu Apr 9 10:27:05 2009 -0500
906 net: fix ULI 526x macro usage in netdev.h
908 Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X
909 is used everywhere else, so that's the correct macro name. Without this fix,
910 Ethernet will not work on the Freescale MPC8610 HPCD.
912 Signed-off-by: Timur Tabi <timur@freescale.com>
913 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
915 commit 7ee38c044ca5041d3378d6507580ea4ec344af96
916 Author: David Brownell <dbrownell@users.sourceforge.net>
917 Date: Sun Apr 12 15:38:06 2009 -0700
919 fix DaVinci NS16550_REG_SIZE regression
921 Update the DaVinci DM6446 boards to use the new convention
922 for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed
923 from the original 4 bytes, but these chips are little-endian.
925 (Resolves a regression added recently by the include/ns16550.h
926 patch to "Unify structure declaration for registers". The code
927 previously worked just fine because the registers were accessed
928 as host-endian words, not as bytes.)
930 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
932 commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9
933 Author: Mike Frysinger <vapier@gentoo.org>
934 Date: Sun Apr 12 22:29:20 2009 -0400
936 cmd_nand: drop duplicate NULL ptr check
938 The first if statement checks for NULL ptrs, so there is no need to check
939 it again in later else cases (such as .oob).
941 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
942 CC: Scott Wood <scottwood@freescale.com>
944 commit 7732cef2eeb4e339cfcd8553fab773af73a20805
945 Author: David Brownell <dbrownell@users.sourceforge.net>
946 Date: Mon Apr 13 08:03:38 2009 -0700
948 CMD_UBI != MTD_PARTITIONS
950 Fix dependency goofage: it should certainly be possible to have the
951 partition support without bringing in UBI commands.
953 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
954 Acked-by: Stefan Roese <sr@denx.de>
956 commit 6ebff365eb63093ca35b687316002535c6a18820
957 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
958 Date: Thu Apr 16 21:30:48 2009 +0200
960 at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
962 The timer has been rewrote with a precision at ~0,18%
964 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
965 Tested-by: Sergey Lapin <slapin@ossfans.org>
966 Tested-by: Eric BENARD <ebenard@free.fr>
968 commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a
969 Author: Ilko Iliev <iliev@ronetix.at>
970 Date: Thu Apr 16 21:30:48 2009 +0200
972 at91: add support for the PM9263 board of Ronetix GmbH
974 The PM9263 board is based on the AT91SAM9263-EK board.
976 Here is the page on Ronetix website:
977 http://www.ronetix.at/starter_kit_9263.html
979 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
980 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
982 commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb
983 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
984 Date: Thu Apr 16 21:30:44 2009 +0200
986 at91sam9/at91cap: improve clock framework
988 calculate dynamically the clock rate and pllb setting for usb
990 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
992 commit dd7c302099ef5590069bdbf292aaa8230cd59de7
993 Author: Stefan Roese <sr@denx.de>
994 Date: Wed Apr 15 14:08:48 2009 +0200
996 ppc4xx: Disable POST memory test on NAND-booting Kilauea
998 Don't run the memory POST on the NAND-booting version. It will
999 overwrite part of the U-Boot image which is already loaded from NAND
1000 to SDRAM. We were just lucky that it booted at all with this SDRAM
1003 Signed-off-by: Stefan Roese <sr@denx.de>
1005 commit 9a929170be89b27bce677504da27e88600c06c49
1006 Author: Stefan Roese <sr@denx.de>
1007 Date: Wed Apr 15 14:06:26 2009 +0200
1009 ppc4xx: Disable POST memory test on NAND-booting Sequoia
1011 Don't run the memory POST on the NAND-booting version. It will
1012 overwrite part of the U-Boot image which is already loaded from NAND
1013 to SDRAM. We were just lucky that it booted at all with this SDRAM
1016 Signed-off-by: Stefan Roese <sr@denx.de>
1018 commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3
1019 Author: Stefan Roese <sr@denx.de>
1020 Date: Wed Apr 15 11:32:53 2009 +0200
1022 ppc4xx: Remove unused code for Sequoia NAND booting version
1024 The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not
1025 used at all. This patch changes it's define to the currently used value of
1026 133333333 and removes the unnecessary code.
1028 Signed-off-by: Stefan Roese <sr@denx.de>
1030 commit cf9409885cbe01405bad76790e99f8adf3351f4d
1031 Author: Stefan Roese <sr@denx.de>
1032 Date: Wed Apr 15 10:50:48 2009 +0200
1034 ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets
1036 This additional text in the bootup log helps to see if the board is
1037 configured for NAND-booting. Especially helpful for boards that can
1038 boot from NOR and NAND (e.g. most of the AMCC eval boards).
1040 Signed-off-by: Stefan Roese <sr@denx.de>
1042 commit 5132106a27b8fb302677852b26ffd319b40d17e2
1043 Author: Stefan Roese <sr@denx.de>
1044 Date: Wed Apr 8 10:36:22 2009 +0200
1046 ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
1048 Currently the NOR & NAND support in Linux only works for the "standard"
1049 Sequoia, the version booting for NOR flash. The NAND-booting version
1050 has the chip-selects swapped. Here the chip-select mappings:
1052 "Standard" NOR-booting version:
1056 NAND-booting version:
1060 With this path the dtb gets fixed-up, so that the correct chip-select
1061 numbers are patched in the dtb enabling correct NOR & NAND support
1062 in Linux on the NAND-booting Sequoia version.
1064 Signed-off-by: Stefan Roese <sr@denx.de>
1066 commit aad4eca4ba8d597747199d8af723426681557dda
1067 Author: Mike Frysinger <vapier@gentoo.org>
1068 Date: Sat Apr 4 09:10:27 2009 -0400
1070 Blackfin: audit UART for all known anomalies
1072 There is no code change here, just new comments, but this keeps me from
1073 having to do another audit from scratch in the future.
1075 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1077 commit 8ef929afa43c77c9573caa57c6e17a97a33775c0
1078 Author: Mike Frysinger <vapier@gentoo.org>
1079 Date: Sat Apr 4 08:40:13 2009 -0400
1081 Blackfin: add check for anomaly 05000362
1084 The column address width settings for banks 2 and 3 are misconnected in
1085 the SDRAM controller. Accesses to bank 2 will result in an error if the
1086 Column Address Width for bank 3 (EB3CAW ) is not set to be the same as
1090 If using bank 2, make sure that banks 2 and 3 have the same column address
1091 width settings in the EBIU_SDBCTL register. This must be the case
1092 regardless of whether or not bank 3 is enabled.
1094 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1096 commit c2e07449f546fb375289cdac1a608fdc20357873
1097 Author: Mike Frysinger <vapier@gentoo.org>
1098 Date: Sat Apr 4 08:29:55 2009 -0400
1100 Blackfin: add comment about anomaly 05000430 avoidance
1102 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1104 commit 48ab1509254a4c175e4f65c478a978928ffe09ec
1105 Author: Mike Frysinger <vapier@gentoo.org>
1106 Date: Sat Apr 4 08:10:22 2009 -0400
1108 Blackfin: add workaround for anomaly 05000242
1111 If the DF bit is set prior to a hardware reset, the PLL will continue to
1112 divide CLKIN by 2 after the hardware reset, but the DF bit itself will be
1113 cleared in the PLL_CTL register.
1116 Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by
1119 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1121 commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916
1122 Author: Mike Frysinger <vapier@gentoo.org>
1123 Date: Sat Apr 4 08:09:24 2009 -0400
1125 Blackfin: add workaround for anomaly 05000171
1128 The Boot ROM is executed at power up/reset and changes the value of the
1129 SICA_IWR registers from their default reset value of 0xFFFF, but does not
1133 User code should not rely on the default value of these registers. Set
1134 the desired values explicitly.
1136 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1138 commit 51ee6e057f7a920e2a125cd9f985d10f625e355f
1139 Author: Mike Frysinger <vapier@gentoo.org>
1140 Date: Sat Apr 4 08:22:36 2009 -0400
1142 Blackfin: update anomaly sheets
1144 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1146 commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df
1147 Author: Graf Yang <graf.yang@analog.com>
1148 Date: Sat Apr 4 07:45:57 2009 -0400
1150 Blackfin: nand: flush peripheral before polling it
1152 We need to make sure the data written to the nand flash controller makes
1153 it there before we start polling its status register. Otherwise, we may
1154 get stale data and return before the controller is actually ready.
1156 Signed-off-by: Graf Yang <graf.yang@analog.com>
1157 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1158 Acked-by: Scott Wood <scottwood@freescale.com>
1160 commit 3ccbfb25f48af78e7092ac75f3115e924e76c748
1161 Author: Remy Bohmer <linux@bohmer.net>
1162 Date: Sun Apr 5 11:43:28 2009 +0200
1164 Support for PXA27X UDC.
1166 This Patch adds Support for PXA27X UDC.
1167 (Rebased to drivers/usb reorganisation)
1169 Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
1170 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1172 commit 2731b9a86685190d26b1883f27afda5ac8e1a313
1173 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1174 Date: Fri Apr 3 12:46:58 2009 +0200
1176 drivers/usb: regorganisation
1178 move to linux usb driver organisation
1186 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1187 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1189 commit d04371a116d102e587ba7aa4c329b441cdbea3f4
1190 Author: Todor I Mollov <tmollov@ucsd.edu>
1191 Date: Sat Apr 4 06:53:06 2009 -0400
1193 Blackfin: spi: make cs deassert function deterministic
1195 Blackfin SPI driver was not driving the SPI chip-select high before
1196 putting the chip-select signals into tri-state mode. This is probably
1197 something that slipped by unnoticed in most designs. If the signals are
1198 put directly into a tri-state mode, then the board is relying on the
1199 pull-up resistors to pull up the chip-select before the next transaction.
1200 Most of the time this is fine, except when you have two transactions that
1201 follow each other very closely, such as the flash erase and read status
1202 register commands. In this case I was seeing a 500ns separation between
1203 the transactions. In my setup, with a 10kOhm pull-up, it would meet
1204 timing spec about half the time and resulted in intermittent errors. (A
1205 stronger pull up would fix this, but our design is targeted for low power
1206 consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
1207 I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
1208 chip-selects high before putting them into tri-state. For me, this
1209 resulted in a rise time of 5ns instead of the previous rise time of about
1210 1us, and fully satisfied the timing spec of the chip.
1212 Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
1213 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1215 commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d
1216 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1217 Date: Sat Dec 13 21:08:05 2008 +0100
1219 integratorap: fix PCI support
1221 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1223 commit 1c397508c836dfcb01fb2471c71de0727051f117
1224 Author: Dirk Behme <dirk.behme@googlemail.com>
1225 Date: Mon Mar 30 21:15:23 2009 +0200
1227 OMAP3: Update Overo pin mux for new expansion board
1229 A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and
1230 switches. This patch changes the pinmux configuration for those pins.
1231 They were previously set up for unused MMC3_DAT4-7.
1233 Signed-off-by: Steve Sakoman <steve@sakoman.com>
1234 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
1236 commit ab298231518675b3784aea88ee9b978438f99e63
1237 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1238 Date: Sun Apr 5 13:08:03 2009 +0200
1240 arm: unify reset command
1242 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1244 commit b3acb6cd4059dfb29a5e99095d802717f53ff784
1245 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1246 Date: Sun Apr 5 13:06:31 2009 +0200
1248 arm: clean cache management
1250 unify arm cache management except for non standard cache as ARM7TDMI
1252 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1254 commit 677e62f43235de9a1701204d7bcea0fb3d233fa1
1255 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1256 Date: Sun Apr 5 13:02:43 2009 +0200
1258 arm: update co-processor 15 access
1260 import system.h from linux
1262 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1264 commit 23e4af49e066a53cd3e3659b68ef90572d88de84
1265 Author: Guennadi Liakhovetski <lg@denx.de>
1266 Date: Sun Apr 5 00:42:02 2009 +0200
1268 ARM: add the imx31_phycore_eet target to MAINTAINERS
1270 imx31_phycore_eet is a variant of the imx31_phycore board with a few
1271 extensions, which justifies a separate entry in the MAINTAINERS list,
1272 whereas normally all entries sharing a single configuration file and a
1273 board/ directory have only one entry in MAINTAINERS.
1275 Reported-by: Wolfgang Denk <wd@denx.de>
1276 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1278 commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5
1279 Author: Guennadi Liakhovetski <lg@denx.de>
1280 Date: Sun Apr 5 00:37:07 2009 +0200
1282 ARM: fix out-of-tree build of imx31_phycore_eet
1284 Fix out-of-tree build of the imx31_phycore_eet target.
1286 Reported-by: Wolfgang Denk <wd@denx.de>
1287 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1289 commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237
1290 Author: Jon Smirl <jonsmirl@gmail.com>
1291 Date: Sat Apr 4 17:44:51 2009 -0400
1293 mpc5200: reduce delays in i2c
1295 The previous code waited 1000us before checking i2c
1296 status. Measurement shows i2c is usually ready in
1297 under 50us. Change the polling interval to 15us,
1298 loop 6,667 times to keep the polling timeout constant
1301 commit 36003268968949110ef145d9f2eaf8439c96d25b
1302 Author: Sanjeev Premi <premi@ti.com>
1303 Date: Fri Apr 3 14:00:07 2009 +0530
1305 OMAP: Fix compile issue
1307 Fixes this compile error:
1308 board.c: In function 'do_switch_ecc':
1309 board.c:339: error: 'cmd_tbl_t' has no member named 'help'
1310 make[1]: *** [board.o] Error 1
1311 make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3'
1312 make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2
1314 This is due to the fact that current command uses long
1315 help for the usage print even if the CONFIG_SYS_LONGHELP
1316 is not enabled. (Thanks Jean-Christophe for explanation).
1318 Signed-off-by: Sanjeev Premi <premi@ti.com>
1320 commit 342c1a5d9ab74febf3226a86216dc5aa05295d46
1321 Author: Minkyu Kang <mk7.kang@samsung.com>
1322 Date: Fri Apr 3 09:56:16 2009 +0900
1324 s3c64xx: fix the wrong gpio offset
1326 This patch fix the wrong gpio offset
1328 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
1330 commit ab0689c316c9b2ee33f4de1c50263b64e539f12a
1331 Author: Kyungmin Park <kmpark@infradead.org>
1332 Date: Wed Nov 26 10:18:13 2008 +0900
1334 Move machine specific code to board at s3c64xx (v2)
1336 Move machine specific code to smdk6400.
1337 Some board use OneNAND instead of NAND.
1339 Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
1340 So it's better to use macro instead of hard-coded value.
1342 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1344 commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8
1345 Author: Tom Rix <Tom.Rix@windriver.com>
1346 Date: Wed Apr 1 22:02:19 2009 -0500
1348 ZOOM1 Remove legacy NAND defines
1350 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
1352 commit 5891151707ee5902fe62d554c247f42865815757
1353 Author: Tom Rix <Tom.Rix@windriver.com>
1354 Date: Wed Apr 1 22:02:20 2009 -0500
1356 OMAP3 Fix multiline formatting in board init files.
1358 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
1360 commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d
1361 Author: Wolfgang Denk <wd@denx.de>
1362 Date: Sun Apr 5 00:27:57 2009 +0200
1364 Update CHANGELOG, coding style cleanup.
1366 commit f63728c804ab7413a67d70f6774cd30c3f7b40fb
1367 Author: Wolfgang Denk <wd@denx.de>
1368 Date: Sun Apr 5 00:18:44 2009 +0200
1370 One more fix for building env_embedded.o
1372 In addition to the changes for CONFIG_ENV_IS_IN_FLASH as done in
1373 commit afcbce07, we also need to do the same for
1374 CONFIG_ENV_IS_IN_EEPROM and CONFIG_ENV_IS_IN_NVRAM.
1376 Signed-off-by: Wolfgang Denk <wd@denx.de>
1378 commit e3d1ac7bb1955d36980d267cb4cec40b0f7d30b5
1379 Author: Scott Wood <scottwood@freescale.com>
1380 Date: Thu Apr 2 16:15:10 2009 -0500
1382 common/image.c: Relocate strings in tables.
1384 Without this, u-boot can crash or print garbage if the original link
1385 address no longer points to a valid string.
1387 Signed-off-by: Scott Wood <scottwood@freescale.com>
1389 commit 3a671fc06ae1d9e8eba76600372317c75ae0eb3e
1390 Author: Scott Wood <scottwood@freescale.com>
1391 Date: Thu Apr 2 16:10:36 2009 -0500
1393 mpc8260: Fill in brg's clock-frequency in device tree.
1395 Signed-off-by: Scott Wood <scottwood@freescale.com>
1397 commit c73ed274a211699739d83c2cef92853dc6716e15
1398 Author: Scott Wood <scottwood@freescale.com>
1399 Date: Thu Apr 2 18:20:43 2009 -0500
1401 MPC8260ADS: Add nfsboot/ramboot to default environment.
1403 This brings it in line with other Freescale boards.
1405 Signed-off-by: Scott Wood <scottwood@freescale.com>
1407 commit c203ef5db0476a8c4f6dd86b2e9e9db0ea973f84
1408 Author: Andreas Huber <andreas.huber@keymile.com>
1409 Date: Thu Apr 2 17:15:34 2009 +0200
1411 UBI/cfi-mtd: Fix mtd name for multiple chips
1413 On platforms with multiple NOR chips, currently only the first one
1414 can be selected using the "ubi part" command. This patch fixes this
1415 problem by using different names for the NOR "mtd devices".
1417 It also changes the name of the NOR MTD device from "cfi-mtd" to
1418 "norX" (X indexing the device numer) to better match the mtdparts
1421 Signed-off-by: Stefan Roese <sr@denx.de>
1422 Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
1424 commit 6b6bb02f27fcabfb37ea717fb7e243248e1e2acf
1425 Author: Peter Korsgaard <jacmet@sunsite.dk>
1426 Date: Tue Mar 31 17:52:16 2009 +0200
1428 tools/setlocalversion: use git svn instead of git-svn
1430 Use the new "git <subcmd>" syntax instead of the deprecated
1433 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
1435 commit 7fa96a9a54eb0d87d73888ec2565cda790ba0dff
1436 Author: Mingkai Hu <Mingkai.hu@freescale.com>
1437 Date: Tue Mar 31 14:09:40 2009 +0800
1439 eSPI: add the eSPI register support
1441 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
1443 commit 869f6bf4def5a053fbd1aecd8b2fc36f05196c0b
1444 Author: Minkyu Kang <mk7.kang@samsung.com>
1445 Date: Mon Mar 30 14:55:51 2009 +0900
1447 cmd_mmc: add support for device command for selecting mmc device
1449 This patch improves device command for selecting mmc device
1451 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
1453 commit 9abc9ef8fbe079bf75a634ce64b7dcdb7b0d8bdc
1454 Author: Alan Carvalho de Assis <acassis@gmail.com>
1455 Date: Sat Mar 28 19:50:16 2009 -0300
1457 Small fix to m5282evb
1459 This is just a small fix to get u-boot on m5282evb.
1461 Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
1463 commit febd7e4174e54579c9aa165c85c519fe5288f9d2
1464 Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
1465 Date: Fri Mar 27 10:21:14 2009 +0100
1467 UBIFS: add R/O compatibility
1469 Now UBIFS is supported by u-boot. If we ever decide to change the
1470 media format, then people will have to upgrade their u-boots to
1471 mount new format images. However, very often it is possible to
1472 preserve R/O forward-compatibility, even though the write
1473 forward-compatibility is not preserved.
1475 This patch introduces a new super-block field which stores the
1476 R/O compatibility version.
1478 Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
1479 Acked-by: Adrian Hunter <Adrian.Hunter@nokia.com>
1480 Signed-off-by: Stefan Roese <sr@denx.de>
1482 commit 852dbfdd56f68eb67d138b306a64e4de58dabb91
1483 Author: Mike Frysinger <vapier@gentoo.org>
1484 Date: Mon Mar 23 22:27:34 2009 -0400
1486 more command usage cleanup
1488 Fix up a few dangling commands like in "Command usage cleanup" commit.
1490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1492 commit b93b24bf76f8a8220b236df3a5f30b2204eb4edc
1493 Author: Ladislav Michl <ladis@linux-mips.org>
1494 Date: Mon Mar 23 12:06:07 2009 +0100
1496 Separate mtdparts command from jffs2
1498 On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
1499 > Currently the mtdparts commands are included in the jffs2 command support.
1500 > This doesn't make sense anymore since other commands (e.g. UBI) use this
1501 > infrastructure as well now. This patch separates the mtdparts commands from
1502 > the jffs2 commands making it possible to only select mtdparts when no JFFS2
1503 > support is needed.
1505 ... and to make it useful for NAND chips as well, we should also remove now
1506 unrelated CONFIG_JFFS2_NAND. Note that struct part_info etc is in
1507 jffs2/load_kernel.h which is a bit misleading filename for that purpose,
1508 but that can be fixed later (tm).
1510 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1512 commit b196ca75503ce307c535b87bf47d51f05e7530df
1513 Author: Mike Frysinger <vapier@gentoo.org>
1514 Date: Sun Mar 22 22:18:01 2009 -0400
1516 smc91111_eeprom: move board-specific init into SMC91111_EEPROM_INIT()
1518 Rather than sticking Blackfin-specific stuff into the eeprom example, use
1519 an indirect macro so that any board can override it with their own magic
1520 sauce in their board config file.
1522 Also fix some spurious semi-colons in defines while I'm at it ...
1524 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1525 CC: Ben Warren <biggerbadderben@gmail.com>
1527 commit f5cf2ef2ad2a8bf321712ab460ed846120163d74
1528 Author: Sascha Hauer <s.hauer@pengutronix.de>
1529 Date: Sat Mar 21 09:38:46 2009 -0400
1531 mpc52xx phy: initialize only when needed
1533 Do not initialize phy on startup, instead initialize it
1534 when we actually need it.
1536 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1538 commit 03bab0091948196b9558248684c04f60943ca4b5
1539 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1540 Date: Mon Mar 30 16:51:40 2009 +0200
1542 at91sam9263ek: enable hush and auto complete support
1544 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1545 Acked-by: Stelian Pop <stelian@popies.net>
1547 commit 4758ebdd53571d4d183be5c2db8f0ee4ef368915
1548 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1549 Date: Fri Mar 27 23:26:44 2009 +0100
1551 at91: move dataflash spi driver to drivers/spi
1553 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1555 commit 2b7178afce59f71e95da657273f4132012098c1f
1556 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1557 Date: Fri Mar 27 23:26:44 2009 +0100
1559 at91: move usb driver to drivers/usb
1561 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1563 commit f82518d7f443ebac5f8821103a3c521c963aa6ee
1564 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1565 Date: Fri Mar 27 23:26:43 2009 +0100
1567 at91rm9200: Reset update
1569 Update the rm9200 reset sequence to try executing a board-specific reset
1570 function and move specific board reset to board.
1572 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1574 commit 3524049cd053746298e4cfab2449882e75c146fc
1575 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1576 Date: Fri Mar 27 23:26:43 2009 +0100
1578 at91rm9200: move serial shutdown code to serial drivers
1580 introduce serial_exit for this purpose. Use it only when the rm9200
1581 serial driver is active
1583 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1585 commit beebd851cdbc9dd070bcdfec1fd8f17e3cc91bc0
1586 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1587 Date: Fri Mar 27 23:26:43 2009 +0100
1589 at91rm9200: move serial driver to drivers/serial
1591 add CONFIG_AT91RM9200_USART to activate the driver
1593 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1595 commit cb82a532669f6b02225ec3429ea4d49ff2b97d0a
1596 Author: Ulf Samuelsson <ulf@atmel.com>
1597 Date: Fri Mar 27 23:26:43 2009 +0100
1599 Add support for the AT91RM9200EK Board.
1601 The AT91RM9200-EK Evaluation Board supports the AT91RM9200
1602 ARM9-based 32-bit RISC microcontroller and enables real-time code development
1605 Here is the chip page on Atmel website:
1606 http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507
1615 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
1616 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1618 commit b9c0e4c29e3ec12668ac50e954e7c9ba8f7aa10a
1619 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1620 Date: Fri Mar 27 23:26:42 2009 +0100
1622 add dataflash mmc mux missing support
1624 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1626 commit 2a325ce3c705ab2d82760afc541c511328472df8
1627 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1628 Date: Fri Mar 27 23:26:42 2009 +0100
1630 at91rm9200dk: Move conditional compilation to Makefile
1632 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1634 commit 90a92a708d5180a20d600ba0fc2352ec76dc3829
1635 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1636 Date: Fri Mar 27 23:26:42 2009 +0100
1638 at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT
1640 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1642 commit 843a2654bce74192de2b5a43474fdc27a572ab40
1643 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1644 Date: Fri Mar 27 23:26:42 2009 +0100
1646 at91sam9: add watchdog support
1648 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
1649 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1651 commit a47492ac60657dd9d59c713aa049319ea6eabd52
1652 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1653 Date: Fri Mar 27 13:14:52 2009 +0100
1655 at91sam9/at91cap: spi init add hardware chip select support
1657 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1659 commit 66932ac3929c7a145a6ef6574a96fd7535154951
1660 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1661 Date: Sat Apr 4 19:15:40 2009 +0200
1663 netstar: fix crc32.c dependancy location
1665 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1667 commit 42f9ebff2f758bef524780a00c712eb63a72d99b
1668 Author: Scott Wood <scottwood@freescale.com>
1669 Date: Fri Apr 3 15:24:40 2009 -0500
1671 MPC8260ADS: Define CONFIG_HAS_ETH0.
1673 This is required so that the MAC address will be updated in the device tree.
1675 Signed-off-by: Scott Wood <scottwood@freescale.com>
1677 commit 8701eceffdf77e2908d0b58add0dabc16edf6087
1678 Author: Scott Wood <scottwood@freescale.com>
1679 Date: Fri Apr 3 15:26:45 2009 -0500
1681 PQ2FADS: Enable PCI.
1683 PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
1685 Signed-off-by: Scott Wood <scottwood@freescale.com>
1687 commit 83863df04bd30bfe2430b0c43ca9f78596d3f0bc
1688 Author: Wolfgang Denk <wd@denx.de>
1689 Date: Sat Apr 4 16:57:50 2009 +0200
1691 Fix quoting bug introduced by commit 74de7aef
1693 Signed-off-by: Wolfgang Denk <wd@denx.de>
1695 commit ecf3fb223a56e3c6aa696d94d694eeaca0f44d33
1696 Author: Wolfgang Denk <wd@denx.de>
1697 Date: Sat Apr 4 16:14:51 2009 +0200
1699 Fix implicit declaration of function 'htons'
1701 Include <netinet/in.h> instead of <linux/in.h> to get htons()
1704 Signed-off-by: Wolfgang Denk <wd@denx.de>
1706 commit e6a6789f41f0560ce280089fbd3f1bd0f0f64306
1707 Author: Kumar Gala <galak@kernel.crashing.org>
1708 Date: Sat Apr 4 10:21:02 2009 -0500
1710 fsl_law: Fix bug in calculation of LAW sizing
1712 In set_ddr_laws() when we determined how much of the size requested
1713 to be mapped was covered by the the first LAW we needed to recalculate
1714 the size based on what was actually mapped.
1716 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1718 commit 32049b4048ff8e59bd5ba6160d6d5206d283b2a2
1719 Author: Kumar Gala <galak@kernel.crashing.org>
1720 Date: Thu Apr 2 13:57:05 2009 -0500
1722 fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs
1724 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1726 commit c8514622e2713d9c47919acfe23fce386782afe7
1727 Author: Kumar Gala <galak@kernel.crashing.org>
1728 Date: Thu Apr 2 13:22:48 2009 -0500
1730 fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
1732 Rename the pci header for FSL HW so we can move some prototypes
1733 in there and stop doing explicit externs
1735 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1737 commit afcbce07e9323c0e8aeb783ba7ce6104860fd7a7
1738 Author: Wolfgang Denk <wd@denx.de>
1739 Date: Sat Apr 4 16:10:40 2009 +0200
1741 Fix building of env_embedded.o
1743 Since commit a706bfc7 common/env_embedded.o and tools/envcrc were
1744 only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks
1745 building for many boards.
1747 We always have to build these files when CONFIG_ENV_IS_IN_FLASH is
1750 Signed-off-by: Wolfgang Denk <wd@denx.de>
1752 commit a31e091ad70915278fb15b79d6ae53ea2d44b251
1753 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1754 Date: Sat Apr 4 12:49:11 2009 +0200
1756 rename include/zlib.h to include/u-boot/zlib.h
1758 Some systems have zlib.h installed in /usr/include/. This isn't the
1759 desired file for u-boot code - we want the one in include/zlib.h.
1760 This rename will avoid the conflict.
1762 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1763 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1765 commit ae644c178f097874a92a6d934f364985fc7e075a
1766 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1767 Date: Sat Apr 4 12:46:31 2009 +0200
1769 tools/Makefile: fix image.c dependancy location
1771 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1772 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1774 commit b074a7081124d7f05fd1651a3bc0b5579fdfa473
1775 Author: Mike Frysinger <vapier@gentoo.org>
1776 Date: Sat Apr 4 07:42:25 2009 -0400
1778 tools: add ncb to gitignore
1780 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1782 commit 453c0d7558215cbc8636d94af172886d84e0dbba
1783 Author: Detlev Zundel <dzu@denx.de>
1784 Date: Fri Apr 3 16:45:46 2009 +0200
1786 include/ns16550.h: Unify structure declaration for registers
1788 Instead of special casing the different access patterns, use common
1789 code with light macros sprinkled in to accomodate for the different
1790 layouts of the register structure.
1792 Note that this also changes the types of the registers for the
1793 "positively packed (>1)" cases. As the registers truly are unsigned
1794 chars, this is surely the Right Thing, but it is a semantic change.
1795 Note that for this case depending on the endianness on the bus, we may
1796 see a change of behaviour.
1798 Signed-off-by: Detlev Zundel <dzu@denx.de>
1800 commit 0a145ce6e7075aa0f4869d6f6149a5ff205d95df
1801 Author: Peter Tyser <ptyser@xes-inc.com>
1802 Date: Fri Mar 13 18:54:52 2009 -0500
1804 Delete now unused tools/Makefile.win32
1806 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1808 commit 2f8d396b9302eddcd8d552648e101a46b7a80acd
1809 Author: Peter Tyser <ptyser@xes-inc.com>
1810 Date: Fri Mar 13 18:54:51 2009 -0500
1812 Add support for building native win32 tools
1814 Add support for compiling the host tools in the tools directory using
1815 the MinGW toolchain. This produces executables which can be used on
1816 standard Windows computers without requiring cygwin.
1818 One must specify the MinGW compiler and strip utilities as if they
1819 were the host toolchain in order to build win32 executables, eg:
1821 make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
1823 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1825 commit e50abf662efbf4ce0e731062c8d3c8ec54763ae2
1826 Author: Peter Tyser <ptyser@xes-inc.com>
1827 Date: Fri Mar 13 18:54:50 2009 -0500
1829 tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation
1831 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1833 commit b0d4d7219a4806e46affc96bd1f65397194a6e72
1834 Author: Peter Tyser <ptyser@xes-inc.com>
1835 Date: Fri Mar 13 18:54:49 2009 -0500
1837 tools/Makefile: Create generic build rules
1839 Create a few generic build rules to replace the current method which has
1840 1 build target for each file
1842 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1844 commit 273174ddbcce215c42f6c307470cd5580a3f72bf
1845 Author: Peter Tyser <ptyser@xes-inc.com>
1846 Date: Fri Mar 13 18:54:48 2009 -0500
1848 tools/Makefile: Use auto-generated object file dependencies
1850 Files in the SRCS variable have their dependencies automatically
1851 generated so remove duplicate explicit dependencies
1853 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1855 commit fb8b33c1e6d621ea3347a75ad3a42a386b44e589
1856 Author: Peter Tyser <ptyser@xes-inc.com>
1857 Date: Fri Mar 13 18:54:47 2009 -0500
1859 tools/Makefile: Remove symlinks for remaining source files
1861 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1863 commit eed073315b6447eceadf7468a4c2b757442c7c6f
1864 Author: Peter Tyser <ptyser@xes-inc.com>
1865 Date: Fri Mar 13 18:54:46 2009 -0500
1867 tools/Makefile: Dynamically generate libfdt object dependencies
1869 Add the libfdt files to the SRCS variable so that they have their
1870 dependencies automatically generated
1872 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1874 commit c0170175393b94560fa7a5da6dd31377df5f4a72
1875 Author: Peter Tyser <ptyser@xes-inc.com>
1876 Date: Fri Mar 13 18:54:45 2009 -0500
1878 tools/Makefile: Remove symlinks for fdt targets
1880 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1882 commit 45d6bdff68877ea214ff33cc1c89a29c76e96f51
1883 Author: Peter Tyser <ptyser@xes-inc.com>
1884 Date: Fri Mar 13 18:54:44 2009 -0500
1886 tools/Makefile: Add libfdt/ to the include search path
1888 This change makes the process of symlinking libfdt_internal.h
1891 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1893 commit fba0e3a0814f9bf48c32a4c8a7987c36ae96651b
1894 Author: Peter Tyser <ptyser@xes-inc.com>
1895 Date: Fri Mar 13 18:54:43 2009 -0500
1897 tools: Remove unecessary symlinking of zlib.h
1899 crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink
1900 was previously necessary to give U-Boot's version of zlib.h precedence
1901 over the host computer's version of zlib.h.
1903 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1905 commit 40b8d909ace06f6f494dee08ffa64a82493e72e9
1906 Author: Peter Tyser <ptyser@xes-inc.com>
1907 Date: Fri Mar 13 18:54:42 2009 -0500
1909 tools/Makefile: Add tools/ to the include search path
1911 This change makes the process of symlinking mkimage.h and fdt_host.h
1914 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1916 commit 1cd300de5e19c9e8383ee2eb2b6bd3b8b9378c78
1917 Author: Peter Tyser <ptyser@xes-inc.com>
1918 Date: Fri Mar 13 18:54:41 2009 -0500
1920 tools/Makefile: Compile ncb when CONFIG_NETCONSOLE
1922 Also conditionally add ncb.o to OBJ_FILES list
1924 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1926 commit 123c48a21ce08b4a33f36e96cc75f92324e761d7
1927 Author: Peter Tyser <ptyser@xes-inc.com>
1928 Date: Fri Mar 13 18:54:40 2009 -0500
1930 tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET
1932 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1934 commit 4d93a0a807b8ca0289ba5da00c646cd2d54af120
1935 Author: Peter Tyser <ptyser@xes-inc.com>
1936 Date: Fri Mar 13 18:54:39 2009 -0500
1938 tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED
1940 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1942 commit cd26a31a23f9a58ba52870f8ffb57d77d1baee20
1943 Author: Peter Tyser <ptyser@xes-inc.com>
1944 Date: Fri Mar 13 18:54:38 2009 -0500
1946 tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP
1948 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1950 commit 7cd5cbc34699ccc15d0277f48375cad928d04faf
1951 Author: Peter Tyser <ptyser@xes-inc.com>
1952 Date: Fri Mar 13 18:54:37 2009 -0500
1954 tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG
1956 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1958 commit eeba8617908e33f7e7db3b1588c04ca65b856793
1959 Author: Peter Tyser <ptyser@xes-inc.com>
1960 Date: Fri Mar 13 18:54:36 2009 -0500
1962 tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS
1964 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1966 commit 335ffe7e0e0a30e90ce409c3279016a582157d8e
1967 Author: Peter Tyser <ptyser@xes-inc.com>
1968 Date: Fri Mar 13 18:54:35 2009 -0500
1970 tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled
1972 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1974 commit ee3584a5970230ee96aae19505ad3226734ee4ff
1975 Author: Peter Tyser <ptyser@xes-inc.com>
1976 Date: Fri Mar 13 18:54:34 2009 -0500
1978 tools/Makefile: Split variable declarations into multiple lines
1980 Split variable declarations into multiple lines and use the standard
1981 VAR-y convention. Also move object and binary variable declarations to
1982 after config.mk has been included to allow for these lists to utilize
1983 the CONFIG_XXX variables.
1985 These changes lay the groundwork for conditional compilation of files
1986 in the tools directory.
1988 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1990 commit 21d28e95ed874ab1ed9787f939d8a53e99d30ddb
1991 Author: Peter Tyser <ptyser@xes-inc.com>
1992 Date: Fri Mar 13 18:54:33 2009 -0500
1994 tools/Makefile: Remove inappropriate double-tabs
1996 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1998 commit 652f4ba076689fd0acd447561a777b1c440a4b57
1999 Author: Peter Tyser <ptyser@xes-inc.com>
2000 Date: Fri Mar 13 18:54:32 2009 -0500
2002 tools/Makefile: Remove HOSTARCH HOSTOS defines
2004 The values of HOSTARCH and HOSTOS which are exported from the top-level
2005 Makefile should be used
2007 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009 commit 2eeb4e95fbfafe54645fae7ec0b2594101f0573b
2010 Author: Peter Tyser <ptyser@xes-inc.com>
2011 Date: Fri Mar 13 18:54:31 2009 -0500
2013 gen_eth_addr: Use POSIX rand() and srand()
2015 Replace random()/srandom() use with rand()/srand() to support
2016 compilation with the mingw toolchain. The rand()/srand() functions are
2017 generally more common and are functionally equivalent to the original
2018 random()/srandom() calls.
2020 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2022 commit 24d2ae5e9debe4b75151a55251031a14477fa875
2023 Author: Peter Tyser <ptyser@xes-inc.com>
2024 Date: Fri Mar 13 18:54:28 2009 -0500
2026 elf.h: Use stdint.h to provide standard typedefs for WIN32
2028 The original code provided an incomplete set of typedefs for WIN32
2029 compiles and replicated the standard typedefs that are already
2030 provided by stdint.h
2032 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2034 commit a706bfc7d0e2d1935c5670045288e6cd1ffdfabc
2035 Author: Peter Tyser <ptyser@xes-inc.com>
2036 Date: Fri Mar 13 18:54:27 2009 -0500
2038 common/Makefile: Conditionally compile env_embedded.o
2040 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2042 commit 2b48f7d5f62835f87278efb498397b6ae9e2d117
2043 Author: Peter Tyser <ptyser@xes-inc.com>
2044 Date: Fri Mar 13 18:54:26 2009 -0500
2046 Makefile: Add removal of *.exe files to clean target
2048 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2050 commit d0d6144e0e4a03a68311b781f3dde38dc9316b82
2051 Author: Peter Tyser <ptyser@xes-inc.com>
2052 Date: Fri Mar 13 18:54:25 2009 -0500
2054 Makefile: Make autoconf.mk a dependency of the depend target
2056 The original code did not generate autoconf.mk until after some targets
2057 dependencies had already been calculated, for example the directories in
2058 the SUBDIRS variable
2060 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2062 commit 75eb82ec7cacb18d059d701b35677b93d2bb7596
2063 Author: unsik Kim <donari75@gmail.com>
2064 Date: Wed Feb 25 11:31:24 2009 +0900
2066 mflash: Initial mflash support
2068 Mflash is fusion memory device mainly targeted consumer eletronic and
2070 Internally, it have nand flash and other hardware logics and supports
2071 some different operation (ATA, IO, XIP) modes.
2073 IO mode is custom mode for the host that doesn't have IDE interface.
2074 (Many mobile targeted SoC doesn't have IDE bus)
2076 This driver support mflash IO mode.
2078 Followings are brief descriptions about IO mode.
2080 1. IO mode based on ATA protocol and uses some custom command. (read
2081 confirm, write confirm)
2082 2. IO mode uses SRAM bus interface.
2084 Signed-off-by: unsik Kim <donari75@gmail.com>
2086 commit 200779e3e2a9aeda7030b171a8c39d7797019917
2087 Author: Detlev Zundel <dzu@denx.de>
2088 Date: Fri Apr 3 11:53:01 2009 +0200
2090 Rename common ns16550 constants with UART_ prefix to prevent conflicts
2092 Fix problems introduced in commit
2093 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
2094 diagnosis functions for inka4x0] which redefined MSR_RI which is
2095 already used on PowerPC systems.
2097 Also eliminate redundant definitions in ps2mult.h. More cleanup will
2098 be needed for other redundant occurrences though.
2100 Signed-off-by: Detlev Zundel <dzu@denx.de>
2102 commit 99067b08f4a0ce20ff337a35211239f334d8f451
2103 Author: Scott Wood <scottwood@freescale.com>
2104 Date: Wed Apr 1 15:33:24 2009 -0500
2106 Noisily disable the legacy NAND subsystem.
2108 Legacy NAND is marked for feature removal after April 2009 (i.e. this
2109 upcoming release). There are still several boards that reference it
2110 (though many do so only for disk-on-chip support which has been silently
2111 disabled for a while now). These boards will now fail to build
2112 with #error, though the code is still there if the user removes #error.
2114 The plan is to remove the code outright in the next release, along with
2115 any board code that refers to it (such as board/esd/common/auto_update.c).
2117 Also, remove the legacy NAND API description from README.nand.
2119 Signed-off-by: Scott Wood <scottwood@freescale.com>
2121 commit 69bcabb51686fdd133cb1848c0d3b0a4fc6ca5cf
2122 Author: apgmoorthy <moorthy.apg@samsung.com>
2123 Date: Fri Mar 27 14:45:23 2009 +0530
2125 Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
2127 Currently OneNAND initial program loader (ipl) reads only block 0 ie 128KB.
2128 However, u-boot image for apollon board is 195KB making the board
2129 unbootable with OneNAND.
2131 Fix ipl to read CONFIG_SYS_MONITOR_LEN.
2132 CONFIG_SYS_MONITOR_LEN macro holds the U-Boot image size.
2134 Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
2135 Signed-off-by: Gangheyamoorthy <moorthy.apg@samsung.com>
2136 Signed-off-by: Scott Wood <scottwood@freescale.com>
2138 commit 74de7aefd79690bae8cf5a5120f5962d444be089
2139 Author: Wolfgang Denk <wd@denx.de>
2140 Date: Wed Apr 1 23:34:12 2009 +0200
2142 Add "source" command; prepare removal of "autoscr" command
2144 According to the doc/feature-removal-schedule.txt, the "autoscr"
2145 command will be replaced by the "source" command in approximately 6
2148 This patch prepares this change and starts a 6 month transition
2151 - The new "source" command has been added, which implements exactly
2152 the same functionlaity as the old "autoscr" command before
2153 - The old "autoscr" command name is kept as an alias for compatibility
2154 - Command sequences, script files atc. have been adapted to use the
2155 new "source" command
2156 - Related environment variables ("autoscript", "autoscript_uname")
2157 have *not* been adapted yet; these will be renamed resp. removed in
2158 a separate patch when the support for the "autoscr" command get's
2161 Signed-off-by: Wolfgang Denk <wd@denx.de>
2163 commit 78237df55248034a2d7c2daea992b9dbe7ca8e96
2164 Author: Wolfgang Denk <wd@denx.de>
2165 Date: Thu Apr 2 17:31:09 2009 +0200
2167 Add "GPL cleanup" task to feature-removal-schedule.txt
2169 Announce removal of all non-GPL or GPL-incompatible files
2172 Signed-off-by: Wolfgang Denk <wd@denx.de>
2174 commit d9596ffbdc79cea285010b67dd20a4618303f624
2175 Author: Mike Frysinger <vapier@gentoo.org>
2176 Date: Thu Apr 2 12:51:28 2009 -0400
2178 sf: stmicro: dont send 4 bytes when reading status register
2180 I can't find anywhere in the datasheet that says the status register needs
2181 3 dummy bytes sent to it before being able to read back the first real
2182 result. Tests on a Blackfin board show that after writing the opcode, the
2183 status register starts coming back immediately. So only write out the
2184 read status register opcode before polling the result.
2186 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2187 CC: Jason McMullan <mcmullan@netapp.com>
2188 CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2190 commit 1abe365ffcfc29c061e8fd8b45551be5ad1428dd
2191 Author: Mike Frysinger <vapier@gentoo.org>
2192 Date: Thu Apr 2 08:11:31 2009 -0400
2194 sf: set common timeouts in seconds, not milliseconds
2196 Since timeouts are only hit when there is a problem in the system, we
2197 don't want to prematurely timeout on a functioning setup. Thus having
2198 low timeouts (in milliseconds) doesn't gain us anything in the production
2199 case, but rather increases likely hood of causing problems where none
2202 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2203 CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2205 commit 2a6ce1115b3cbe746965cfa0058ce645b6c1ada1
2206 Author: Mike Frysinger <vapier@gentoo.org>
2207 Date: Thu Apr 2 06:51:49 2009 -0400
2209 sf: stmicro: use common page timeout define
2211 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2212 CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2214 commit 0dcdbb172c2fdf60c5c578980308b312fd56496f
2215 Author: Mike Frysinger <vapier@gentoo.org>
2216 Date: Sat Mar 28 06:41:09 2009 -0400
2218 sf: always read 5 bytes for the idcode
2220 Some SPI flash drivers like to have extended id information available
2221 (like the spansion flash), so rather than making it re-issue the ID cmd
2222 to get at the last 2 bytes, have the common code read 5 bytes rather than
2223 just 3. This also matches the Linux behavior where it always reads 5 id
2224 bytes from all flashes.
2226 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2227 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2228 CC: Mingkai Hu <Mingkai.hu@freescale.com>
2230 commit 9726ba4abaa16cd6c385ad350d403f98a8eacf52
2231 Author: Mike Frysinger <vapier@gentoo.org>
2232 Date: Fri Mar 27 16:34:21 2009 -0400
2234 sf: stmicro: drop redundant id read
2236 The common SPI flash code reads the idcode and passes it down to the SPI
2237 flash driver, so there is no need to read it again ourselves.
2239 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2240 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2241 CC: Jason McMullan <mcmullan@netapp.com>
2242 CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2244 commit 1c5874374e091b4bb62917c519861f7682fe066e
2245 Author: Mike Frysinger <vapier@gentoo.org>
2246 Date: Fri Mar 27 19:27:58 2009 -0400
2248 sf: add driver for SST flashes
2250 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2251 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2253 commit f773a1bbdb8f3bf1ddab2874f36f043c4f8f044d
2254 Author: Mike Frysinger <vapier@gentoo.org>
2255 Date: Mon Mar 23 23:03:58 2009 -0400
2257 sf: drop DEBUG defines
2259 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2260 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2262 commit 6b850a9fa8a216f3692da2511cb1a6c16409b1af
2263 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2264 Date: Sun Jan 4 07:44:07 2009 +0100
2266 mtd: add some at45 spi flash support
2275 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2276 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2278 commit 6805e4bf83e6f444f7411101228766c8a7aec5f7
2279 Author: Mingkai Hu <Mingkai.hu@freescale.com>
2280 Date: Tue Mar 31 14:09:41 2009 +0800
2282 mtd: SPI Flash: Support the Spansion Flash
2284 Add MTD SPI Flash support for S25FL008A, S25FL016A,
2285 S25FL032A, S25FL064A, S25FL128P.
2287 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
2288 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2290 commit 40587701924aa0afc86b3840421b4cc6de42c748
2291 Author: Mike Frysinger <vapier@gentoo.org>
2292 Date: Mon Mar 30 20:56:45 2009 -0400
2294 Blackfin: force all boards to HZ of 1000
2296 Since the Blackfin timer code requires HZ to be 1000, barf on any board
2297 that tries to use a different value.
2299 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2301 commit f4032d2eec9d71a59c6c724671e577f67a76839b
2302 Author: Mike Frysinger <vapier@gentoo.org>
2303 Date: Fri Mar 27 21:07:45 2009 -0400
2305 Blackfin: bf533-stamp: drop old spi flash driver
2307 Now that the common SPI flash code supports all the flashes, we can stop
2308 using the old driver.
2310 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2312 commit bc72f50a659d0d1b551817e1910b9b2be1c7e496
2313 Author: Mike Frysinger <vapier@gentoo.org>
2314 Date: Thu Mar 26 15:42:12 2009 -0400
2316 Blackfin: add BF538/BF539 SPI portmux handling
2318 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2320 commit 46ac352f0f9406a5f9aa157ac62867fb4650dfd3
2321 Author: Mike Frysinger <vapier@gentoo.org>
2322 Date: Mon Mar 23 22:36:10 2009 -0400
2324 Blackfin: do not delay on output bytes
2326 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2328 commit dbc6ab9f75bd0c13d3f42692e9463f8ab65fc382
2329 Author: Mike Frysinger <vapier@gentoo.org>
2330 Date: Mon Mar 23 22:17:27 2009 -0400
2332 Blackfin: drop newline from OTP help
2334 Looks like I accidentally added a newline to the OTP help when merging and
2337 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2339 commit d3c38d96b991d641a33f7748130dae008563cdc9
2340 Author: Mike Frysinger <vapier@gentoo.org>
2341 Date: Sun Mar 22 23:43:31 2009 -0400
2343 Blackfin: convert bfin_sdh to legacy mmc
2345 The Blackfin SDH controller is still using the legacy framework, so update
2346 the driver to use the renamed functions.
2348 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2350 commit d248cfb2d940b742f6bfdba9b832a3df96da3101
2351 Author: Mike Frysinger <vapier@gentoo.org>
2352 Date: Sun Feb 22 16:30:38 2009 -0500
2354 Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c
2356 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2358 commit ad9073211ca9e62162a39851e082b8d07a662fb6
2359 Author: Mike Frysinger <vapier@gentoo.org>
2360 Date: Fri Feb 13 17:10:58 2009 -0500
2362 Blackfin: fix crash when booting from external memory
2364 When testing a u-boot binary that hasn't been booted from the bootrom, we
2365 have to make sure the bootstruct structure has sane storage space. If we
2366 don't, the initcode will crash when it tries to dereference an invalid
2369 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2371 commit 84a9dda324c3faa56be14449d7519b993d9397a9
2372 Author: Mike Frysinger <vapier@gentoo.org>
2373 Date: Sun Oct 12 21:32:52 2008 -0400
2375 Blackfin: bf518f-ezbrd: new board port
2377 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2379 commit 0c31ddf7b70f77dede42dc82ecab7753a819acaa
2380 Author: Mike Frysinger <vapier@gentoo.org>
2381 Date: Sun Oct 12 21:30:48 2008 -0400
2383 Blackfin: bf526-ezbrd: new board port
2385 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2387 commit 5c45f7cac2f74e2c14aa6b028cd969651cc9ac8e
2388 Author: Mike Frysinger <vapier@gentoo.org>
2389 Date: Sun Oct 12 21:25:33 2008 -0400
2391 Blackfin: bf538f-ezkit: new board port
2393 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2395 commit d9a5d113b93583c984711127ab8503e136ed1e4a
2396 Author: Mike Frysinger <vapier@gentoo.org>
2397 Date: Sun Oct 12 20:59:12 2008 -0400
2399 Blackfin: bf527-ezkit: new board port
2401 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2403 commit 76d21803ddd7dc4bcb81739ea2d3cd679e052f46
2404 Author: Mike Frysinger <vapier@gentoo.org>
2405 Date: Sun Oct 12 05:05:42 2008 -0400
2407 Blackfin: bf548-ezkit: new board port
2409 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2411 commit 67b89c79e72fe86b0ea0199425d880630beb95d8
2412 Author: Laurent Gregoire <laurent.gregoire@tomtom.com>
2413 Date: Tue Mar 3 14:23:59 2009 +0100
2415 libfdt: Fix C++ compile-time cast error on gnu 4.2.1
2417 Allow the inclusion of libfdt.h in C++ source.
2419 Signed-off-by: Laurent Gregoire <laurent.gregoire@tomtom.com>
2420 Acked-by: David Gibson <david@gibson.dropbear.id.au>
2422 commit 13d93f38e86818739317b0206d597265cf9e675e
2423 Author: Emil Medve <Emilian.Medve@Freescale.com>
2424 Date: Mon Feb 23 10:43:36 2009 -0600
2426 Fix a possible overflow case detected by gcc 4.3.2
2428 .../dtc/libfdt/fdt_sw.c: In function 'fdt_end_node':
2429 .../dtc/libfdt/fdt_sw.c:81: error: assuming signed overflow does not occur when assuming that (X + c) < X is always false
2431 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
2433 commit a22d9cfbb5bcfb3dc6ffd64d391b568e8a0ce383
2434 Author: David Gibson <david@gibson.dropbear.id.au>
2435 Date: Fri Feb 6 14:03:24 2009 +1100
2437 libfdt: Rework/cleanup fdt_next_tag()
2439 Currently, callers of fdt_next_tag() must usually follow the call with
2440 some sort of call to fdt_offset_ptr() to verify that the blob isn't
2441 truncated in the middle of the tag data they're going to process.
2442 This is a bit silly, since fdt_next_tag() generally has to call
2443 fdt_offset_ptr() on at least some of the data following the tag for
2446 This patch alters fdt_next_tag() to always use fdt_offset_ptr() to
2447 verify the data between its starting offset and the offset it returns
2448 in nextoffset. This simplifies fdt_get_property() which no longer has
2449 to verify itself that the property data is all present.
2451 At the same time, I neaten and clarify the error handling for
2452 fdt_next_tag(). Previously, fdt_next_tag() could return -1 instead of
2453 a tag value in some circumstances - which almost none of the callers
2454 checked for. Also, fdt_next_tag() could return FDT_END either because
2455 it encountered an FDT_END tag, or because it reached the end of the
2456 structure block - no way was provided to tell between these cases.
2458 With this patch, fdt_next_tag() always returns FDT_END with a negative
2459 value in nextoffset for an error. This means the several places which
2460 loop looking for FDT_END will still work correctly - they only need to
2461 check for errors at the end. The errors which fdt_next_tag() can
2463 - -FDT_ERR_TRUNCATED if it reached the end of the structure
2464 block instead of finding a tag.
2466 - -FDT_BADSTRUCTURE if a bad tag was encountered, or if the
2467 tag data couldn't be verified with fdt_offset_ptr().
2469 This patch also updates the callers of fdt_next_tag(), where
2470 appropriate, to make use of the new error reporting.
2472 Finally, the prototype for the long gone _fdt_next_tag() is removed
2473 from libfdt_internal.h.
2475 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2477 commit 2c0b843e710aa1e2da25c2592e6dbe5d0b0ab7da
2478 Author: David Gibson <david@gibson.dropbear.id.au>
2479 Date: Fri Feb 6 14:01:56 2009 +1100
2481 libfdt: Rework fdt_next_node()
2483 Currently fdt_next_node() will find the next node in the blob
2484 regardless of whether it is above, below or at the same level in the
2485 tree as the starting node - the depth parameter is updated to indicate
2486 which is the case. When a depth parameter is supplied, this patch
2487 makes it instead terminate immediately when it finds the END_NODE tag
2488 for a node at depth 0. In this case it returns the offset immediately
2489 past the END_NODE tag.
2491 This has a couple of advantages. First, this slightly simplifies
2492 fdt_subnode_offset(), which no longer needs to explicitly check that
2493 fdt_next_node()'s iteration hasn't left the starting node. Second,
2494 this allows fdt_next_node() to be used to implement
2495 _fdt_node_end_offset() considerably simplifying the latter function.
2497 The other users of fdt_next_node() either don't need to iterate out of
2498 the starting node, or don't pass a depth parameter at all. Any
2499 callers that really need to iterate out of the starting node, but keep
2500 tracking depth can do so by biasing the initial depth value.
2502 This is a semantic change, but I think it's very unlikely to break any
2503 existing library users.
2505 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2507 commit c123098035be8bae3859bbfbd06861f197c07631
2508 Author: Scott Wood <scottwood@freescale.com>
2509 Date: Tue Mar 31 17:49:36 2009 -0500
2511 mpc83xx: Set guarded bit on BAT that covers the end of the address space
2513 The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of
2514 address space; however, not all of this space is covered by a device. In
2515 particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped
2516 at the far end of the address space.
2518 In zlib, there is a loop that references p[-1] if p is non-NULL. Under
2519 some circumstances, this leads to the CPU speculatively loading from
2520 0xfffffff8 if p is NULL. This leads to a machine check.
2522 Signed-off-by: Scott Wood <scottwood@freescale.com>
2524 continuation to the remaining mpc83xx boards that suffer from the same problem.
2526 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2528 commit c2eb8be7f760a2efe30a495bfb10857838dcf3fa
2529 Author: Kim Phillips <kim.phillips@freescale.com>
2530 Date: Mon Mar 30 14:28:05 2009 -0500
2532 rtc: remove broken rtc_read and rtc_write declarations
2534 commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g.
2535 EPSON)" introduces the following build error on boards configuring e.g,
2538 Configuring for MPC837XEMDS board...
2539 ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration
2540 /home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here
2541 ds1374.c:104: error: conflicting types for 'rtc_write'
2542 /home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here
2544 this reverts the erroneous chunk.
2546 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2547 Acked-by: Detlev Zundel <dzu@denx.de>
2548 CC: Detlev Zundel <dzu@denx.de>
2549 CC: Andreas Pfefferle <ap@denx.de>
2551 commit fc39c2fd51e64707de4d61ed49479ebea2847e1b
2552 Author: Kumar Gala <galak@kernel.crashing.org>
2553 Date: Tue Mar 31 17:58:13 2009 -0500
2555 85xx/86xx: Ensure MP boot page is not used
2557 We had a bug on 86xx in which the boot page used to bring up secondary
2558 cores was being overwritten and used for the malloc region in u-boot.
2560 We need to reserve the region of memory that the boot page is going to
2561 be put at so nothing uses it.
2563 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2564 Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
2566 commit c840d26c752141b94bbc24ac748ddd45752a955a
2567 Author: Kumar Gala <galak@kernel.crashing.org>
2568 Date: Tue Mar 31 23:11:05 2009 -0500
2570 85xx: Introduce determine_mp_bootpg() helper.
2572 Match determine_mp_bootpg() that was added for 86xx. We need this to
2573 address a bug introduced in v2009.03 with 86xx MP booting. We have to
2574 make sure to reserve the region of memory used for the MP bootpg() so
2575 other u-boot code doesn't use it.
2577 Also added a comment about how cpu_reset() is dealing w/an errata on
2580 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2582 commit 7649a590b53ee548f41428bf20780f74ce9fc099
2583 Author: Kumar Gala <galak@kernel.crashing.org>
2584 Date: Tue Mar 31 23:02:38 2009 -0500
2586 86xx: Cleanup MP support
2588 * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
2589 * Introduce determine_mp_bootpg() helper. We'll need this to address a
2590 bug introduced in v2009.03 with 86xx MP booting. We have to make sure
2591 to reserve the region of memory used for the MP bootpg() so other
2592 u-boot code doesn't use it.
2593 * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
2594 allow cmd_mp.c to build and work. In the future we should look at
2595 implementing all these functions. This could be common w/85xx if we
2596 use spin tables on 86xx.
2598 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2600 commit f6ef8b7a43ed7f68a4bb524faad5e4f75ea3e3e2
2601 Author: Becky Bruce <beckyb@kernel.crashing.org>
2602 Date: Tue Mar 31 18:38:37 2009 -0500
2604 mpc8641hpcn/sbc8641d: Add missing board_lmb_reserves
2606 We're missing the board_lmb_reserve definitions that allow
2607 cpu_mp_lmb_reserve to be called; this means that Linux
2608 is free to reallocate reserved pages. Linux currently boots
2609 because we're getting lucky - the page we've reserved is
2610 high enough in memory that it isn't allocated by Linux
2611 while we still need it to be in existence.
2613 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2614 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2616 commit 0fc4f64c59873a47d555dd66bad25797d4ecb0ed
2617 Author: Ladislav Michl <ladis@linux-mips.org>
2618 Date: Tue Mar 31 13:43:10 2009 +0200
2622 Fix NAND support broken during new NAND code merge. Move those few lines of
2623 code to board/netstar/netstar.c
2625 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2627 commit d144f94d590b5190a9963bd0f2026b2a7ce67eda
2628 Author: Jens Scharsig <esw@bus-elektronik.de>
2629 Date: Tue Mar 31 08:18:29 2009 +0200
2631 soft_i2c.c compiler/linker error
2633 This patch fix the compiler/linker errors
2635 common/cmd_i2c.c:1252: undefined reference to `i2c_get_bus_speed'
2636 common/cmd_i2c.c:1256: undefined reference to `i2c_set_bus_speed'
2638 if board use CONFIG_I2C_CMD_TREE and CONFIG_I2C_MULTI_BUS is not
2639 uesd/undef (wrong define order)
2643 removes additional empty lines
2645 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
2647 commit 765547dc5e0e8cbe6b8f4ea8a5d6ff237935c352
2648 Author: Haiying Wang <Haiying.Wang@freescale.com>
2649 Date: Fri Mar 27 17:02:45 2009 -0400
2651 MPC85xx: Add MPC8569MDS board support
2653 This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
2654 EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.
2656 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2657 Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
2658 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2660 commit 22b6dbc1696d927d938dd4e16f65d83c0d4fb3f4
2661 Author: Haiying Wang <Haiying.Wang@freescale.com>
2662 Date: Fri Mar 27 17:02:44 2009 -0400
2664 MPC85xx: Add MPC8569 CPU support
2666 There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
2667 LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
2668 then invalidate it after LBCR bit 13 is set.
2670 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2671 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2673 commit 2d4de6ae5be54b367a72a7ef4e0cf36a9cd4881f
2674 Author: Haiying Wang <Haiying.Wang@freescale.com>
2675 Date: Thu Mar 26 17:01:49 2009 -0400
2677 MPC85xx: Load and enable QE microcode patch in IRAM
2679 For the silicon which doesn't have ROM support in QE, it always needs to load
2680 a pre-built ucode binary to IRAM so that QE can work.
2682 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2683 Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
2685 commit 1b3e4044a28a3d95b0aad41bdc52482bb2cc9b2b
2686 Author: Kumar Gala <galak@kernel.crashing.org>
2687 Date: Thu Mar 19 09:16:10 2009 -0500
2689 85xx: Add support for additional e500mc features
2691 * Enable backside L2
2692 * e500mc no longer has timebase enable in HID (moved to CCSR register)
2694 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2696 commit c360ceac0286159f94d9d1a9496fc9858c8d9bec
2697 Author: Dave Liu <daveliu@freescale.com>
2698 Date: Sat Mar 14 12:48:30 2009 +0800
2700 fsl-ddr: add the DDR3 SPD infrastructure
2702 - support mirrored DIMMs, not support register DIMMs
2703 - test passed on P2020DS board with MT9JSF12872AY-1G1D1
2704 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1
2706 Signed-off-by: Dave Liu <daveliu@freescale.com>
2707 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
2709 commit 6a8197836702991468cead5ead073f589e2623ad
2710 Author: Dave Liu <daveliu@freescale.com>
2711 Date: Sat Mar 14 12:48:19 2009 +0800
2713 fsl-ddr: Fix two bugs in the ddr infrastructure
2716 UM said the total write latency for DDR2 is equal to
2717 WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1.
2718 so, the WR_LAT = CL - 1;
2720 we missed to add the ADD_LAT for DDR2 case.
2722 Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2723 Signed-off-by: Dave Liu <daveliu@freescale.com>
2725 commit 540dcf1cb86961e11aa92c47671f27762c581d8c
2726 Author: Kumar Gala <galak@kernel.crashing.org>
2727 Date: Thu Mar 26 01:34:39 2009 -0500
2729 83xx: Use common LSDMR defines from asm/fsl_lbc.h
2731 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2732 Acked-by: Kim Phillips <kim.phillips@freescale.com>
2734 commit b0fe93eda69721aef1fdef576164b668fad83bbd
2735 Author: Kumar Gala <galak@kernel.crashing.org>
2736 Date: Thu Mar 26 01:34:38 2009 -0500
2738 85xx: Use common LSDMR defines from asm/fsl_lbc.h
2740 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2742 commit 0088c298f0eeb90ec001f744e9959dea83dd563a
2743 Author: Kumar Gala <galak@kernel.crashing.org>
2744 Date: Thu Mar 26 01:34:37 2009 -0500
2746 Add LSDMR (SDRAM Mode Register) definition on localbus
2748 The masks for various bit defines of LSDMR are common and thus we can
2749 define them in one place rather than replicating them in each config.h
2751 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2753 commit 89c00fb15859213788f0ad089934c376fb356099
2754 Author: Ladislav Michl <ladis@linux-mips.org>
2755 Date: Mon Mar 30 18:58:41 2009 +0200
2757 OMAP: use {read,write}l to access timer registers
2759 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2761 commit 81472d893fa565c9d300928a40e504a689bde131
2762 Author: Ladislav Michl <ladis@linux-mips.org>
2763 Date: Mon Mar 30 18:58:41 2009 +0200
2765 OMAP: rename timer divisor
2767 Divisor field is called PTV not PVT.
2769 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2770 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2772 commit fe672d60b2a8c9e803596ba4533fa1776015551d
2773 Author: Ladislav Michl <ladis@linux-mips.org>
2774 Date: Mon Mar 30 18:58:40 2009 +0200
2776 OMAP: reindent timer code
2778 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2780 commit b3f66b0ba09949e0796ce7fad6367f75f15ed890
2781 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2782 Date: Mon Mar 30 18:58:40 2009 +0200
2784 s3c2410: move nand driver to drivers/mtd/nand
2786 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2788 commit d3b635774194404bcd424f6b376419bce22076ad
2789 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2790 Date: Mon Mar 30 18:58:40 2009 +0200
2792 s3c24x0: move i2c driver to drivers/i2c
2794 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2796 commit 300f99f4539dd5caf7e19af5e4ea5eb259445913
2797 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2798 Date: Mon Mar 30 18:58:39 2009 +0200
2800 s3c24x0: move serial driver to drivers/serial
2802 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2804 commit 942ba9969b9efa25f816c238861ecb339c54ed73
2805 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2806 Date: Mon Mar 30 18:58:39 2009 +0200
2808 davinci: move i2c driver to drivers/i2c
2810 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2812 commit ee4f3e2765a1c65c9861c5d2cf2e6feb84b90bd8
2813 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2814 Date: Mon Mar 30 18:58:39 2009 +0200
2816 davinci: move nand driver to drivers/mtd/nand
2818 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2820 commit d3e55d0774a180c1837bd7ddec464015e883bd86
2821 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2822 Date: Mon Mar 30 18:58:38 2009 +0200
2824 imx: move serial driver to drivers/serial
2826 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2828 commit 2344bb8de2354101a8264c2123303c9d8d2aed3c
2829 Author: Detlev Zundel <dzu@denx.de>
2830 Date: Mon Mar 30 00:31:36 2009 +0200
2832 inka4x0: Use proper accessor macros for memory mapped registers.
2834 Signed-off-by: Detlev Zundel <dzu@denx.de>
2836 commit e979e85fd39b06436922bb4d6bb5fafcbc775182
2837 Author: Detlev Zundel <dzu@denx.de>
2838 Date: Mon Mar 30 00:31:35 2009 +0200
2840 inka4x0: Add hardware diagnosis and RTC in configuration.
2842 This patch adds the board specific communication routines needed by
2843 the external 4543 RTC.
2845 Signed-off-by: Detlev Zundel <dzu@denx.de>
2846 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2848 commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124
2849 Author: Detlev Zundel <dzu@denx.de>
2850 Date: Mon Mar 30 00:31:34 2009 +0200
2852 inka4x0: Add hardware diagnosis functions for inka4x0
2854 This patch adds advanced diagnosis functions for the inka4x0 board.
2856 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2857 Signed-off-by: Detlev Zundel <dzu@denx.de>
2859 commit 04e11cf383ff6231535fd981023bb1306b2133d4
2860 Author: Detlev Zundel <dzu@denx.de>
2861 Date: Mon Mar 30 00:31:33 2009 +0200
2863 rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
2865 Signed-off-by: Detlev Zundel <dzu@denx.de>
2866 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2868 commit 572e6179adb5447ff42ec2aa5cf3a26decf97583
2869 Author: Detlev Zundel <dzu@denx.de>
2870 Date: Mon Mar 30 00:31:32 2009 +0200
2872 drivers/twserial: Add protocol driver for "three wire serial" interface.
2874 This pretty unintelligent interface is used on some RTC chips.
2876 Signed-off-by: Detlev Zundel <dzu@denx.de>
2878 commit a6ef3ddeafbe8007af3662cc4509b897c53ab395
2879 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2880 Date: Sun Mar 29 23:01:42 2009 +0200
2882 arm720t/clps7111: move serial driver to drivers/serial
2884 add CONFIG_CLPS7111_SERIAL to activate the driver
2886 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2888 commit 6790c55704531eb98f76b51d50e0f73d19fa2988
2889 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2890 Date: Sun Mar 29 23:01:42 2009 +0200
2892 lpc2292: move serial driver to drivers/serial
2894 add CONFIG_LPC2292_SERIAL to activate the driver
2896 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2898 commit 176a600d0ecdaccbac483d2ba992d0119f853119
2899 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2900 Date: Sun Mar 29 23:01:42 2009 +0200
2902 ks8695: move serial driver to drivers/serial
2904 add CONFIG_KS8695_SERIAL to activate the driver
2906 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2908 commit 6d27bca15d445fcf07d6e7e30ced95c945c875ea
2909 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2910 Date: Sun Mar 29 23:01:42 2009 +0200
2912 s3c64xx: move usb driver to drivers/usb
2914 add CONFIG_USB_S3C64XX to activate the driver
2916 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2918 commit ecfa8dda2f55e1fbe12dee0b5cc16e7d484674c9
2919 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2920 Date: Sun Mar 29 23:01:41 2009 +0200
2922 imx31: move serial driver to drivers/serial
2924 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2926 commit 9ea91c9fefb3920d735533a7798c1a44a3ed3ffc
2927 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2928 Date: Sun Mar 29 23:01:41 2009 +0200
2930 netarm: move serial driver to drivers/serial
2932 add CONFIG_NETARM_SERIAL to activate the driver
2934 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2936 commit 412ab705888742add435dd6ffc2e8bda14962235
2937 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2938 Date: Sun Mar 29 23:01:41 2009 +0200
2940 sa1100: move serial driver to drivers/serial
2942 add CONFIG_SA1100_SERIAL to activate the driver
2944 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2946 commit b2368754a9202225fd072e159fb78da7d2cdb623
2947 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2948 Date: Sun Mar 29 23:01:41 2009 +0200
2950 s3c44b0: extract cache from cpu.c
2952 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2954 commit 40fd626223eae5363719bcb9a6896f08ceeee90a
2955 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2956 Date: Sun Mar 29 23:01:41 2009 +0200
2958 s3c44b0: move serial driver to drivers/serial
2960 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2962 commit 5fe1377cc46199fe71c47be4b1aa81440ae96f9f
2963 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2964 Date: Sun Mar 29 23:01:40 2009 +0200
2966 s3c44b0: move rtc driver to drivers/rtc
2968 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2970 commit 50f601cca8985615f9e3de4c34887448ade8a64b
2971 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2972 Date: Sun Mar 29 23:01:40 2009 +0200
2974 s3c44b0: move i2c driver to drivers/i2c
2976 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2978 commit 281dfb0c0c531194f99e60d6285cca4e2a9fb1b6
2979 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2980 Date: Sun Mar 29 23:01:36 2009 +0200
2982 s3c4510b: move specific code to soc directory
2984 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2986 commit 04531f3c11c693dc54924f82c41979d960309c9d
2987 Author: Ladislav Michl <ladis@linux-mips.org>
2988 Date: Wed Mar 25 23:43:58 2009 +0100
2990 NetStar: add RTC support
2994 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2996 commit 71f7bd305d9768bcb7ddbe4b5823cbf3b3597b11
2997 Author: Ladislav Michl <ladis@linux-mips.org>
2998 Date: Wed Mar 25 23:43:50 2009 +0100
3000 NetStar: use generic flash driver
3002 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3004 commit 3f464b0fc009d41d2734c08e472eb6d445f73a5c
3005 Author: Ladislav Michl <ladis@linux-mips.org>
3006 Date: Mon Mar 16 23:31:20 2009 +0100
3008 NetStar: update crcit utility
3010 Make crc32 function to match its prototype. Use more meaningful identifiers.
3012 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3014 commit 488f5d8790c451fc527fe5d2ef218f2a5e40ea17
3015 Author: Ladislav Michl <ladis@linux-mips.org>
3016 Date: Mon Mar 23 17:46:27 2009 +0100
3018 Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
3020 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3022 commit 88685b5f62274167ad2ba8a58e108d89ff71955b
3023 Author: Wolfgang Denk <wd@denx.de>
3024 Date: Sun Mar 29 00:58:16 2009 +0100
3026 VCMA9: fix compile errors
3029 cmd_vcma9.c:82: warning: implicit declaration of function 'eth_getenv_enetaddr'
3030 cmd_vcma9.c:89: error: 'enetaddr' undeclared (first use in this function)
3032 Signed-off-by: Wolfgang Denk <wd@denx.de>
3034 commit 26e42cbd786241fec370a0b92ad591f4e9cc423b
3035 Author: Wolfgang Denk <wd@denx.de>
3036 Date: Sun Mar 29 00:54:21 2009 +0100
3038 ARM: fix warning: 'print_eth' defined but not used
3040 This warning got issued for all ARM systems that don't have
3041 CONFIG_CMD_NET enabled.
3043 Signed-off-by: Wolfgang Denk <wd@denx.de>
3045 commit fd88d91a639ce41b825c8d50dc2182050e98fe53
3046 Author: Ladislav Michl <ladis@linux-mips.org>
3047 Date: Mon Mar 23 18:16:34 2009 +0100
3051 cs8900.c: In function 'eth_init':
3052 cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type
3053 cs8900.c:165: error: invalid operands to binary <<
3054 cs8900.c:166: error: invalid operands to binary <<
3055 cs8900.c:167: error: invalid operands to binary <<
3057 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3058 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3060 commit d2567be915036720693f3ddd00c39b5b4d86fb8d
3061 Author: Wolfgang Denk <wd@denx.de>
3062 Date: Sat Mar 28 20:16:16 2009 +0100
3064 Fix implicit declaration of function 'eth_[gs]etenv_enetaddr'
3066 ...and some other compile warnings.
3068 Signed-off-by: Wolfgang Denk <wd@denx.de>
3070 commit 97b05d7d524a6b4f195f07b8f90e98561a85596c
3071 Author: Wolfgang Denk <wd@denx.de>
3072 Date: Sat Mar 28 16:17:29 2009 +0100
3074 mpc8xx/ether.c: fix warning: unused variable 'bd'
3076 Also minor coding style cleanup.
3078 Signed-off-by: Wolfgang Denk <wd@denx.de>
3080 commit 2dce551e10728f9e5655279f761f1d3cc0a8fe90
3081 Author: Detlev Zundel <dzu@denx.de>
3082 Date: Wed Mar 25 17:27:52 2009 +0100
3084 command.c: Expose the core of do_help as _do_help to the rest of u-boot.
3086 Other commands implementing subcommands can reuse this code nicely.
3088 Signed-off-by: Detlev Zundel <dzu@denx.de>
3089 Signed-off-by: Andreas Pfefferle <ap@denx.de>
3091 commit 4e325fbfa4dea04eceb6392e00807c40d214dc6f
3092 Author: Detlev Zundel <dzu@denx.de>
3093 Date: Tue Mar 24 18:02:33 2009 +0100
3095 mpc5xxx: Add structure definition for several more register blocks.
3097 Signed-off-by: Detlev Zundel <dzu@denx.de>
3099 commit 739b0e594677a0676577bc95db4495a5563fc7f8
3100 Author: Detlev Zundel <dzu@denx.de>
3101 Date: Fri Mar 27 15:03:55 2009 +0100
3103 MAINTAINERS: Add entry for 'inka4x0' board.
3105 Signed-off-by: Detlev Zundel <dzu@denx.de>
3107 commit e55ecec45340755ef47cbbb13fb35ceed60eb115
3108 Author: Detlev Zundel <dzu@denx.de>
3109 Date: Fri Mar 27 15:03:54 2009 +0100
3111 MAINTAINERS: Keep list sorted.
3113 Signed-off-by: Detlev Zundel <dzu@denx.de>
3115 commit 0baeca4b09b703728f8e66b52418039fd8f8ce35
3116 Author: Mike Frysinger <vapier@gentoo.org>
3117 Date: Thu Mar 26 11:17:41 2009 -0400
3119 karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos
3121 The function is called "eth_setenv_enetaddr", not "eth_putenv_enetaddr".
3123 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3124 CC: Ben Warren <biggerbadderben@gmail.com>
3126 commit 76756e41cde0a617e781a604cc47dfaef63697cd
3127 Author: Heiko Schocher <hs@denx.de>
3128 Date: Thu Mar 26 07:33:59 2009 +0100
3130 ppc: cleanup compiler errors/warnings
3132 Current u-boot top of tree builds with warnings/errors for
3133 the following boards:
3135 ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823
3136 RPXClassic debris PN62
3138 following patch solves this.
3140 Signed-off-by: Heiko Schocher <hs@denx.de>
3141 Acked-by: Mike Frysinger <vapier@gentoo.org>
3143 commit 3edf68c47fdd52f19c1e840771c19ba90cf5ced1
3144 Author: Stefan Roese <sr@denx.de>
3145 Date: Thu Mar 26 16:14:13 2009 +0100
3147 ppc4xx: Sequoia: Fix TLB reassignment in NAND booting code
3149 This patch fixes a bug in the Sequoia TLB init code to reconfigure
3150 the correct TLB (boot space) after running from RAM. This bug was
3151 introduced with patch 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
3152 [ppc4xx: Make Sequoia boot vxWorks] which changed the order of the
3153 TLB in the Sequoia init.S file.
3155 Signed-off-by: Stefan Roese <sr@denx.de>
3157 commit e2b66fe453a3679f807b37fc5923d89214302764
3158 Author: Wolfgang Denk <wd@denx.de>
3159 Date: Thu Mar 26 10:00:57 2009 +0100
3161 ads5121: enable instruction cache
3163 Enabling the instruction cache significantly accelerates U-Boot
3164 operations like CRC checking, image uncompression, etc.
3166 Kudos to Andrea Scian for pointing out.
3168 Signed-off-by: Wolfgang Denk <wd@denx.de>
3170 commit 33e88c557b29c84c52039ba05993fa70fe62afe3
3171 Author: Jon Smirl <jonsmirl@gmail.com>
3172 Date: Sun Mar 22 22:55:45 2009 -0400
3174 mpc5200: suppress printf until console initialized
3176 On boards which have the environment in eeprom, i2c_init() is called
3177 before the console and RAM are initialized.
3178 Suppress printfs until the console is initialized.
3180 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
3181 Acked-by: Heiko Schocher <hs@denx.de>
3183 commit 0c6926736effbb9a19047949b7e9b3e8feab7c46
3184 Author: Guennadi Liakhovetski <lg@denx.de>
3185 Date: Wed Mar 25 11:36:50 2009 +0100
3187 ARM: Add the imx31_phycore_eet board to MAKEALL
3189 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3191 commit 917cfc70c18b74fa8a80189bdce8395199fa8360
3192 Author: Nishanth Menon <nm@ti.com>
3193 Date: Wed Mar 25 22:13:56 2009 +0100
3195 OMAP3:Beagle: Enable mtdparts
3197 http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
3198 provides a flexible way to create and maintain u-boot mtd
3199 partitions. This allows commands such as "nand erase fs"
3200 to work and the user no longer needs to decode the absolute
3201 nand offsets. This patch enables this function for beagleboard
3203 Signed-off-by: Nishanth Menon <nm@ti.com>
3204 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3206 commit 4de1a5daab079ddc8ce1274144700203d692105c
3207 Author: Mike Frysinger <vapier@gentoo.org>
3208 Date: Sun Feb 22 16:26:35 2009 -0500
3210 Blackfin: bf537-stamp: split post code out into dedicated post.c
3212 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3214 commit 5e8f245743ed14c89e495ba2c027703db9813160
3215 Author: Mike Frysinger <vapier@gentoo.org>
3216 Date: Sat Oct 11 22:51:56 2008 -0400
3218 Blackfin: add support for S25FL128 parts
3220 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3222 commit bf1e028bf3eab1d702fa0627cade4460688f3913
3223 Author: Mike Frysinger <vapier@gentoo.org>
3224 Date: Sat Oct 11 22:51:23 2008 -0400
3226 Blackfin: overhaul SPI flash handling to speed things up
3228 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3230 commit efcc08cededa2168b96f12a22a5872340880d334
3231 Author: Mike Frysinger <vapier@gentoo.org>
3232 Date: Sat Oct 11 22:51:05 2008 -0400
3234 Blackfin: add support for SST SPI flashes
3236 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3238 commit 5b8cfbe63f7242ebb1008f30bbbc85a9d54b38cf
3239 Author: Mike Frysinger <vapier@gentoo.org>
3240 Date: Sat Oct 11 22:50:10 2008 -0400
3242 Blackfin: add hack for crappy m25p80
3244 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3246 commit 6f5fd56f0832ea5c254e2e4be84ea21fc8ecd5c5
3247 Author: Mike Frysinger <vapier@gentoo.org>
3248 Date: Wed Jan 21 20:47:12 2009 -0500
3250 Blackfin: bf537-stamp: increase monitor size
3252 The new jffs2 code pushed the code size just over the limit, so increase
3253 the limit a bit more.
3255 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3257 commit f82caaccc87e1f76448ff42a6b930e59797e4f65
3258 Author: Mike Frysinger <vapier@gentoo.org>
3259 Date: Mon Dec 8 16:16:11 2008 -0500
3261 Blackfin: bf537-stamp: bump default SCLK up to 125MHz
3263 Since all of the bf537-stamp and bf537-ezkit boards out there can handle it,
3264 increase the speed of SCLK to 125MHz rather than 100MHz.
3266 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3268 commit 751e54c3b77311b720b794813cce20546f288ada
3269 Author: Mike Frysinger <vapier@gentoo.org>
3270 Date: Sat Oct 11 22:44:14 2008 -0400
3272 Blackfin: bf537-stamp: rewrite MAC-in-flash handling
3274 Use the common net eth functions to setup the env/global data with the MAC
3275 address, and properly handle the case where CONFIG_SYS_NO_FLASH is defined.
3277 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3279 commit 88f9faffb383bbc6f23b8cc8519c5ffecfa2c8ad
3280 Author: Mike Frysinger <vapier@gentoo.org>
3281 Date: Tue Dec 9 13:47:39 2008 -0500
3283 Blackfin: add clkin_hz= to default kernel command line for ADI boards
3285 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3287 commit 9f64ba2412d3cede9eb1f290987e5c3a28df3232
3288 Author: Mike Frysinger <vapier@gentoo.org>
3289 Date: Sun Oct 12 23:49:13 2008 -0400
3291 Blackfin: bf533-stamp: bump up default clocks
3293 Since the hardware can handle it, bump the default clocks from 80mhz SCLK
3294 and 398mhz CCLK to 100mhz SCLK and 498mhz CCLK.
3296 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3298 commit 23fd959eeaaa0434ac7f9c1191de66c76d97d699
3299 Author: Mike Frysinger <vapier@gentoo.org>
3300 Date: Sat Oct 11 22:40:22 2008 -0400
3302 Blackfin: bf533-stamp: rewrite startup LED notifications
3304 Again, don't clobber pins that we aren't actually using, and use the common
3305 LED framework rather than our own hob-job-but-not-really-working.
3307 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3309 commit cf6f469e2730fc8ab3523808b828be000d6eee77
3310 Author: Mike Frysinger <vapier@gentoo.org>
3311 Date: Sun Jun 1 09:09:48 2008 -0400
3313 Blackfin: unify common ADI board settings
3315 Rather than duplicate the same ADI settings in every ADI board, create a
3316 common ADI config header and have all ADI boards start using that. This
3317 will also make merging the ~10 boards I have to forward port a lot easier.
3319 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3321 commit 196c74311f394c6eb08bd9ab07a35671299b9851
3322 Author: Kyungmin Park <kmpark@infradead.org>
3323 Date: Tue Mar 3 09:05:53 2009 +0900
3325 Reduce OneNAND IPL common code
3327 OneNAND IPL has common codes for RAM init, load data, and jump to 2nd
3328 bootloader, but it's common code used about 300~400 bytes. So board
3329 specific codes, such as lowlevel_init, can't has enough code. It make
3330 a difficult to implement OneNAND IPL.
3332 his patch make this common code as small as possible. and give
3333 lowlevel_init can have more codes.
3335 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3336 Signed-off-by: Scott Wood <scottwood@freescale.com>
3338 commit 16f2f5a351004129e79e79816697a367fd9e5446
3339 Author: Wolfgang Grandegger <wg@grandegger.com>
3340 Date: Wed Feb 11 18:38:24 2009 +0100
3342 Add multi-chip NAND support for the TQM8548 modules
3344 This patches configures the NAND UPM-FSL driver with multi-chip
3345 support for the Micron MT29F8G08FAB NAND flash memory on the
3348 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
3349 Signed-off-by: Scott Wood <scottwood@freescale.com>
3351 commit 33846df28fa1f4cf96a96c18142d48d813caa892
3352 Author: Wolfgang Grandegger <wg@grandegger.com>
3353 Date: Wed Feb 11 18:38:23 2009 +0100
3355 Add wait flags to support board/chip specific delays
3357 The NAND flash on the TQM8548_BE modules requires a short delay after
3358 running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE
3359 requires a further short delay after writing out a buffer. Normally the
3360 R/B pin should be checked, but it's not connected on the TQM8548_BE.
3361 The corresponding Linux FSL UPM driver uses similar delay points at the
3362 same locations. To manage these extra delays in a more general way, I
3363 introduced the "wait_flags" field allowing the board-specific driver to
3364 specify various types of extra delay.
3366 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
3367 Signed-off-by: Scott Wood <scottwood@freescale.com>
3369 commit 06e9f7df054d26d7f49c56bf9a6844b193ad6313
3370 Author: Wolfgang Grandegger <wg@grandegger.com>
3371 Date: Wed Feb 11 18:38:22 2009 +0100
3373 Add support for TQM-specific chip select logic to FSL-UPM
3375 For the NAND chips on the TQM8548 modules, a special chip-select logic is
3376 used. It uses dedicated address lines to be set via UPM machine address
3377 register (mar). This patch adds such support to the FSL-UPM driver.
3379 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
3380 Signed-off-by: Scott Wood <scottwood@freescale.com>
3382 commit e93c1c169d49eda7babad9c781f541e2e34f0ff0
3383 Author: Wolfgang Grandegger <wg@grandegger.com>
3384 Date: Wed Feb 11 18:38:21 2009 +0100
3386 Add multi chip support to the FSL-UPM driver
3388 This patch adds support for multi-chip NAND devices to the FSL-UPM
3389 driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
3390 called with the argument "chip_nr" to allow testing the proper chip
3391 select line. The NAND support of the MPC8360ERDK is updated as well.
3392 No other boards are currently using the FSL UPM driver.
3394 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
3395 Signed-off-by: Scott Wood <scottwood@freescale.com>
3397 commit 672ed2aee91b4856f6671fc72cd34168d8f1b624
3398 Author: Wolfgang Grandegger <wg@grandegger.com>
3399 Date: Wed Feb 11 18:38:20 2009 +0100
3401 Enable multi chip support in the NAND layer
3403 This patch adds support for NAND_MAX_CHIPS to the MTD NAND layer.
3404 Multi-chips devices are displayed as shown:
3406 Device 0: 2x NAND 512MiB 3,3V 8-bit, sector size 128 KiB
3408 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
3409 Signed-off-by: Scott Wood <scottwood@freescale.com>
3411 commit 74398b23f9c2ffdc137fd92910a46e3333fb93f9
3412 Author: Mike Frysinger <vapier@gentoo.org>
3413 Date: Sat Oct 11 21:58:33 2008 -0400
3415 Blackfin: put memory into self-refresh before/after programming clocks
3417 When initializing the core clocks, stick external memory into self-refresh.
3418 This gains us a few cool things:
3419 - support suspend-to-RAM with Linux
3420 - reprogram clocks automatically when doing "go" on u-boot.bin in RAM
3421 - make sure settings are stable before flashing new version
3422 - finally fully unify initialize startup code path between LDR/non-LDR
3424 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3426 commit d347d572ab1f2d47bf257c9f7ca2e602038a136b
3427 Author: Mike Frysinger <vapier@gentoo.org>
3428 Date: Sat Oct 11 21:56:08 2008 -0400
3430 Blackfin: do not program voltage regulator on parts that do not have one
3432 Some newer Blackfins (like the BF51x) do not have an on-chip voltage
3433 regulator, so do not attempt to program the memory as if it does.
3435 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3437 commit 0d4f24b70f7a979f58174f3eb271874950b551b6
3438 Author: Mike Frysinger <vapier@gentoo.org>
3439 Date: Sun Jun 1 01:28:24 2008 -0400
3441 Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers
3443 If the board config does not specify an explicit EBIU_SDBCTL value, set it
3444 up with sane values based on other configuration options.
3446 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3448 commit 3986e981f565c08f10c7e526af8cb518d741c349
3449 Author: Mike Frysinger <vapier@gentoo.org>
3450 Date: Sat Dec 6 18:06:58 2008 -0500
3452 Blackfin: handle reboot anomaly 432
3454 Workaround anomaly 432:
3455 The bfrom_SysControl() firmware function does not clear the SIC_IWR1
3456 register before executing the PLL programming sequence. Therefore, any
3457 interrupt enabled in the SIC_IWR1 register prior to the call to
3458 bfrom_SysControl() can prematurely terminate the idle sequence required
3459 for the PLL to relock properly. SIC_IWR0 is properly handled.
3461 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3463 commit 7e1d212b6da492c6ea32c62af92e185284f41291
3464 Author: Mike Frysinger <vapier@gentoo.org>
3465 Date: Sat Oct 18 04:04:49 2008 -0400
3467 Blackfin: kill off LDR jump block
3469 The Boot ROM uses EVT1 as the entry point so set that rather than having
3470 to use a tiny jump block in the default EVT1 location.
3472 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3474 commit a75fa148d60b1975403441e45565621bba50d2d9
3475 Author: Mike Frysinger <vapier@gentoo.org>
3476 Date: Tue Jan 6 10:00:48 2009 -0500
3478 Blackfin: simplify symbol_lookup() a bit
3480 No need to skip a byte as the symbol table handles this.
3482 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3484 commit 59f0978a7e78d20277ddbde7caf0ea877f3cfd98
3485 Author: Mike Frysinger <vapier@gentoo.org>
3486 Date: Sat Feb 7 05:43:21 2009 -0500
3488 Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits
3490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3492 commit 58130f8920151d9e8942bbdf3388f2defb47e415
3493 Author: Mike Frysinger <vapier@gentoo.org>
3494 Date: Sat Feb 7 05:41:17 2009 -0500
3496 Blackfin: drop SPORT_TX read helper macros
3498 The SPORT_TX registers cannot be read (the hardware will trigger an error),
3499 so drop the read helper macros.
3501 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3503 commit 820b076c449688bcd4af6db5a33ae424d1a60d0e
3504 Author: Mike Frysinger <vapier@gentoo.org>
3505 Date: Sat Feb 7 05:25:35 2009 -0500
3507 Blackfin: unify duplicate CPU port definitions
3509 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3511 commit 744fd240d181b0b05b1436e1b655c9a62526c752
3512 Author: Mike Frysinger <vapier@gentoo.org>
3513 Date: Fri Feb 6 00:59:50 2009 -0500
3515 Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX
3517 With the new CONFIG_XXX system and CONFIG_CMD_XXX handling, these defines
3518 are no longer used/needed.
3520 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3522 commit 45c48953e8a4038bd49c46813fcff5a207867ae4
3523 Author: Mike Frysinger <vapier@gentoo.org>
3524 Date: Mon Oct 6 04:01:26 2008 -0400
3526 Blackfin: print out Flash: before checking it
3528 If there is some problem in the flash init/checking code, it's nicer to see
3529 the message "Flash:" before crashing. This way the source of the problem
3530 is a bit more straightforward.
3532 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3534 commit 1c7a79a04eb916f685f7275520b5eea6968a1559
3535 Author: Mike Frysinger <vapier@gentoo.org>
3536 Date: Thu Aug 7 15:33:09 2008 -0400
3538 Blackfin: safely flush data caches when in writeback mode
3540 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3542 commit c06f2b13022703611bc3e512bd34f9014a46f448
3543 Author: Mike Frysinger <vapier@gentoo.org>
3544 Date: Thu Aug 7 13:21:48 2008 -0400
3546 Blackfin: update lockbox api according to latest documentation
3548 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3550 commit 2decc2a8d17a5397cb5956e46c8466c736e305a2
3551 Author: Mike Frysinger <vapier@gentoo.org>
3552 Date: Sat Oct 11 21:49:06 2008 -0400
3554 Blackfin: mark bfin_reset static
3556 The function is only used locally, so mark it static.
3558 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3560 commit 974473caa732f63312687ef2bd2d22dad8e99b9a
3561 Author: Sonic Zhang <Sonic.Zhang@analog.com>
3562 Date: Fri Mar 20 19:28:20 2009 -0400
3564 Blackfin: spi: there is no PORTJ_FER MMR on BF537
3566 Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality),
3567 then there is no PORTJ_FER register for us to worry about.
3569 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
3570 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3572 commit e82b762f293debc53c5afa90f37264f6b07520f9
3573 Author: Mike Frysinger <vapier@gentoo.org>
3574 Date: Tue Mar 17 13:58:23 2009 -0400
3576 Blackfin: fix jtag console tstc
3578 The jtag tstc operation was checking the hardware to see if data is
3579 available from it (which is fine for the jtag getc operation), but the
3580 higher layers need to know whether any data is available. Since we have
3581 to read up to 4 bytes at a time from the hardware, the higher layers need
3582 to know they can consume the cached bytes as well.
3584 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3586 commit bc683f58b1f1d8d20546fe019483967a51a49df1
3587 Author: Mike Frysinger <vapier@gentoo.org>
3588 Date: Sun Feb 22 16:23:41 2009 -0500
3590 Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...)
3592 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3594 commit 8996d1608acb8f59fcb186dc7ed7d87f8fee1297
3595 Author: Mike Frysinger <vapier@gentoo.org>
3596 Date: Sun Feb 22 16:02:27 2009 -0500
3598 Blackfin: unify net-related init code
3600 Unify all of the net-related init code in the common Blackfin board init
3601 code to clean up the ifdef mess a bit.
3603 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3605 commit c6ea30e52ea82af4858d2b6f99e0fd2ea276d657
3606 Author: Mike Frysinger <vapier@gentoo.org>
3607 Date: Wed Feb 18 12:51:48 2009 -0500
3609 Blackfin: fix SWRST/SYSCR register sizes
3611 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3613 commit a9d6777d39154978b9ef9c682b2627a3480b194c
3614 Author: Mike Frysinger <vapier@gentoo.org>
3615 Date: Wed Feb 18 12:51:31 2009 -0500
3617 Blackfin: update anomaly lists
3619 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3621 commit 4d7c32dad2e787f890ebcd51bfb723a126913c90
3622 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3623 Date: Thu Mar 19 18:31:38 2009 +0100
3625 avr32: fix cacheflush.h location introducted by d8f2aa3298610b
3627 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3628 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3630 commit 3a3baf3ee61e6b28af3b49ebabc9ab4f6015aa48
3631 Author: Eric Schumann <E.Schumann@phytec.de>
3632 Date: Sat Mar 21 09:59:34 2009 -0400
3634 Make flash protection work, when the environment is in EEPROM
3636 On the pcm030 the environment is located in the onboard EEPROM. But we want
3637 to handle flash sector protection in a safe manner. So we must read the
3638 unlock environment variable from EEPROM instead from flash.
3640 This patch is required as long the evironment is saved into the EEPROM.
3642 Stefan: Additional change as suggested by Wolfgang, use bigger char array
3645 Signed-off-by: Eric Schumann <E.Schumann@phytec.de>
3646 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
3647 Acked-by: Wolfgang Denk <wd@denx.de>
3648 Signed-off-by: Stefan Roese <sr@denx.de>
3650 commit de3ce8c59f48f99779d7d7379a5432ded12ec06c
3651 Author: Jon Smirl <jonsmirl@gmail.com>
3652 Date: Sat Mar 21 11:17:56 2009 -0400
3654 Add define for mpc5200 CDM_CLK_ENA
3656 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
3658 commit df486b1fa3f750b153eac7daa0b3bf1f594e5098
3659 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
3660 Date: Sun Mar 22 14:48:16 2009 +0100
3662 at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
3664 AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed.
3666 The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board.
3667 It is essentially the same, with a few minor differences.
3669 Here is the chip page on Atmel website:
3670 http://www.atmel.com/dyn/products/product_card.asp?part_id=4337
3672 Signed-off-by: Justin Waters <justin.waters@timesys.com>
3673 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
3674 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3676 commit 118d168035cc93f586da4812c89cb153eb9f4243
3677 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3678 Date: Sun Mar 22 14:28:14 2009 +0100
3680 cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr'
3682 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3684 commit 176c4a982c6531f96426afaa1126cf9a5e2d5e03
3685 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3686 Date: Sun Mar 22 14:28:13 2009 +0100
3688 cmc_pu2: fix misc_init_r prototype
3690 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3692 commit 53158aea995221706b42c7bad9f717b31ae20414
3693 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3694 Date: Sun Jan 11 03:32:01 2009 +0100
3696 at91sam9xeek: fix soc name
3698 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3700 commit 74c076d6c33d6d42ab065541a38383587879e7b7
3701 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3702 Date: Sun Mar 22 10:22:34 2009 +0100
3704 at91sam9/at91cap: move nand drivers to drivers/mtd/nand
3706 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3708 commit 163966087d62680547f188a93c61d01c8155254e
3709 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3710 Date: Sat Mar 21 21:08:01 2009 +0100
3712 atmel/at91/boards: compile dataflash partition only when dataflash is
3714 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3716 commit e2c0476f958f8e0b269a1118f4ba4a5cd475aa56
3717 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3718 Date: Sat Mar 21 21:08:00 2009 +0100
3720 at91sam9/at91cap: move common macb initialisation to cpu
3722 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3724 commit f3f91f886bc8927fd692ac411b7423a87ffec532
3725 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3726 Date: Sat Mar 21 21:08:00 2009 +0100
3728 at91sam9/at91cap: move common usb host initialisation to cpu
3730 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3732 commit a484b00b86e72ac6da6ee4fce13dbc6b256672fe
3733 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3734 Date: Sat Mar 21 21:08:00 2009 +0100
3736 at91sam9/at91cap: move common led management to cpu
3738 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3740 commit 7ebafb7ec1a0285af8380623c009576f92583b98
3741 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3742 Date: Sat Mar 21 21:07:59 2009 +0100
3744 at91sam9/at91cap: move common spi initialisation to cpu
3746 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3748 commit 1332a2a0694c8e10a5bade397cf83645b2c3fd7e
3749 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3750 Date: Sat Mar 21 21:07:59 2009 +0100
3752 at91sam9/at91cap: move common serial initialisation to cpu
3754 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3756 commit e60beb13cf0135dc71c541021487b5ccc4d269cb
3757 Author: Wolfgang Denk <wd@denx.de>
3758 Date: Sat Mar 21 22:04:41 2009 +0100
3764 Signed-off-by: Wolfgang Denk <wd@denx.de>
3766 commit 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5
3767 Author: Vivek Kutal <vivek.kutal@azingo.com>
3768 Date: Mon Feb 23 21:35:11 2009 +0530
3770 Replaced endpoint numbers with appropriate macros in usbtty.c.
3772 Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
3773 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3775 commit faac4fd852e39cb1d7a740801b060e41aeacef1f
3776 Author: Michael Lawnick <ml.lawnick@gmx.de>
3777 Date: Thu Mar 19 10:06:41 2009 +0100
3779 UBIFS: Missing offset relocation for compressor 'none'
3781 On systems where U-Boot is linked to another address than it really lays
3782 (e.g. backup image), calls via function pointers must be fixed with a
3784 This was not done for none_compr in ubifs_compressors_init() what leads
3785 to system crash on ubifsmount command.
3787 Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
3788 Acked-by: Stefan Roese <sr@denx.de>
3790 commit ce6d0c8de031f345bde745f3b855082adf1c4e45
3791 Author: Stefan Roese <sr@denx.de>
3792 Date: Thu Mar 19 15:35:50 2009 +0100
3794 UBIFS: Add UBIFS commands
3796 This patchset adds these UBIFS related commands:
3799 Mount an UBIFS volume
3802 List a directory of the mounted UBIFS volume
3805 Load a file from the mounted UBIFS volume to memory
3807 Signed-off-by: Stefan Roese <sr@denx.de>
3809 commit 9eefe2a2b37a838558e3d213a9f5519503d0c180
3810 Author: Stefan Roese <sr@denx.de>
3811 Date: Thu Mar 19 15:35:05 2009 +0100
3813 UBIFS: Implement read-only UBIFS support in U-Boot
3815 The U-Boot UBIFS implementation is largely a direct copy from the current
3816 Linux version (2.6.29-rc6). As already done in the UBI version we have an
3817 "abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
3818 ...). This makes it possible to use the original Linux code with very
3819 little changes. And by this we can better update to later Linux versions.
3821 I removed some of the Linux features that are not used in the U-Boot
3822 version (e.g. garbage-collection, write support).
3824 Signed-off-by: Stefan Roese <sr@denx.de>
3825 CC: Artem Bityutskiy <dedekind@infradead.org>
3826 CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>
3828 commit b1b4e89a0f3b75854c39a62cae41bad56d210adf
3829 Author: Stefan Roese <sr@denx.de>
3830 Date: Thu Mar 19 15:34:56 2009 +0100
3832 Add LZO decompressor support
3834 This patch adds LZO decompression support to U-Boot. It is needed for
3835 the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
3836 decompressor. Since we only support read-only in UBIFS, only the
3837 decompressor is needed.
3839 All this is copied with minor changes from the current Linux kernel
3840 version (2.6.28-rc8).
3842 This patch only implements this LZO decompressor support for PPC.
3843 Other platforms using UBIFS will have to add the required
3844 "include/asm/unaligned.h" as well. It should be fairly easy to copy this
3845 from the Linux source tree as I have done it for PPC in this patch.
3847 Signed-off-by: Stefan Roese <sr@denx.de>
3849 commit 68d7d65100e84df00bca971c114092731b441090
3850 Author: Stefan Roese <sr@denx.de>
3851 Date: Thu Mar 19 13:30:36 2009 +0100
3853 Separate mtdparts command from jffs2
3855 Currently the mtdparts commands are included in the jffs2 command support.
3856 This doesn't make sense anymore since other commands (e.g. UBI) use this
3857 infrastructure as well now. This patch separates the mtdparts commands from
3858 the jffs2 commands making it possible to only select mtdparts when no JFFS2
3861 Signed-off-by: Stefan Roese <sr@denx.de>
3862 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3864 commit 02a301cd5087eaffdf456e0a5cec1100c4d9a398
3865 Author: Stefan Roese <sr@denx.de>
3866 Date: Wed Feb 25 12:11:15 2009 +0100
3868 powerpc: Only use eth_getenv_enetaddr() if networking is enabled
3870 Signed-off-by: Stefan Roese <sr@denx.de>
3872 commit 5c4fa9b474af95d60f019ec6369cbe77b9dab4b5
3873 Author: Grzegorz Bernacki <gjb@semihalf.com>
3874 Date: Tue Mar 17 10:06:40 2009 +0100
3876 Add support for the digsy MTC board.
3878 This is the InterControl custom device based on the MPC5200B chip.
3880 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3882 commit ff7dc067369e30066744f096995aef7d97574d15
3883 Author: Stefan Roese <sr@denx.de>
3884 Date: Mon Feb 23 16:52:36 2009 +0100
3886 powerpc: Fix compilation warning in board.c
3890 board.c: In function 'board_init_r':
3891 board.c:653: warning: unused variable 'i'
3892 board.c:651: warning: unused variable 'e'
3894 Signed-off-by: Stefan Roese <sr@denx.de>
3896 commit 9cd690160d3ce1a7fb4ceeee6c99cedb1ac1d49c
3897 Author: Stefan Roese <sr@denx.de>
3898 Date: Mon Feb 23 16:42:51 2009 +0100
3900 ppc4xx: Don't write the MAC address into the internal SoC registers
3902 Remove this code. It's not needed. The 4xx EMAC driver stores the MAC
3903 addresses into the SoC registers instead.
3905 Signed-off-by: Stefan Roese <sr@denx.de>
3907 commit bb57ad4be76d0e2e7f9ec56678235cc9872ff40f
3908 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3909 Date: Fri Feb 20 10:19:19 2009 +0100
3911 ppc4xx: Use correct io accessors for esd 405/440 boards
3913 This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
3914 macros. Also volatile pointer references are replaced by the
3917 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3918 Signed-off-by: Stefan Roese <sr@denx.de>
3920 commit 049216f045fd8e0f45bcef121c2bb1c7d3de6988
3921 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3922 Date: Fri Feb 20 10:19:18 2009 +0100
3924 ppc4xx: Use correct io accessors for esd 405 boards
3926 This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
3927 macros. Also volatile pointer references are replaced by the
3930 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3931 Signed-off-by: Stefan Roese <sr@denx.de>
3933 commit a59205d1519375d027f97a545ad642ab20fce6f8
3934 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3935 Date: Fri Feb 20 10:19:17 2009 +0100
3937 ppc4xx: Cleanup linker scripts of esd 4xx boards
3939 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3940 Signed-off-by: Stefan Roese <sr@denx.de>
3942 commit 2f103ee284e68934a648732db5e0b6ceb4a1ed8f
3943 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3944 Date: Fri Feb 20 10:19:16 2009 +0100
3946 ppc4xx: Update TEXT_BASE for DASA_SIM boards
3948 Fix building DASA_SIM boards by increasing U-Boot's size in flash.
3950 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3951 Signed-off-by: Stefan Roese <sr@denx.de>
3953 commit 09db8f4de6805f1dde510c167f20e56a5405d29e
3954 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3955 Date: Fri Feb 20 10:19:15 2009 +0100
3957 ppc4xx: DU405 maintenance fix
3959 -strip unused features
3962 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3963 Signed-off-by: Stefan Roese <sr@denx.de>
3965 commit 75511b47ac2647be48218dbb93af05b21f404f67
3966 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3967 Date: Fri Feb 20 10:19:14 2009 +0100
3969 ppc4xx: Abort autoboot only by space key on CPCI405 boards
3971 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3972 Signed-off-by: Stefan Roese <sr@denx.de>
3974 commit e17ee157ca9ff0d4cc5841d06c4b70c1603df29c
3975 Author: Graeme Russ <graeme.russ@gmail.com>
3976 Date: Tue Feb 24 21:14:56 2009 +1100
3978 Add basic relocation to i386 port
3980 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
3982 commit 8c63d47651f77d9fb887cad433370b866eb0a193
3983 Author: Graeme Russ <graeme.russ@gmail.com>
3984 Date: Tue Feb 24 21:14:45 2009 +1100
3986 Implement SC520 timers
3988 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
3990 commit 6d7f610b09f813b1239eedcbfe921cfd439aea25
3991 Author: Graeme Russ <graeme.russ@gmail.com>
3992 Date: Tue Feb 24 21:14:32 2009 +1100
3994 Factor out SC520 sub-features
3996 Moved sub-features of the SC520 code which is currently selectively compiled
3997 using #ifdef out of sc520.c into individual files selectively compiled via
4000 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
4002 commit abf0cd3dff227cfb6e82ad13be62e28e6e89d5df
4003 Author: Graeme Russ <graeme.russ@gmail.com>
4004 Date: Tue Feb 24 21:13:40 2009 +1100
4006 Rewrite i386 interrupt handling
4008 Rewrite interrupt handling functionality for the i386 port. Separated
4009 functionality into separate CPU and Architecture components.
4011 It appears as if the i386 interrupt handler functionality was intended
4012 to allow multiple handlers to be installed for a given interrupt.
4013 Unfortunately, this functionality was not fully implemented and also
4014 had the problem that irq_free_handler() does not allow the passing
4015 of the handler function pointer and therefore could never be used to
4016 free specific handlers that had been installed for a given IRQ.
4018 There were also various issues with array bounds not being fully
4021 I had two objectives in mind for the new implementation:
4023 1) Keep the implementation as similar as possible to existing
4024 implementations. To that end, I have used the leon2/3
4025 implementations as the reference
4027 2) Seperate CPU and Architecture specific elements. All specific i386
4028 interrupt functionality is now in cpu/i386/ with the high level
4029 API and architecture specific code in lib_i386. Functionality
4030 specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
4031 been further split out into an individual file to allow for the
4032 implementation of the PIC architecture of the SC520 CPU (supports
4035 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
4037 commit ece444b42b71eb5bce34a24ec584573b3c8c4a98
4038 Author: Graeme Russ <graeme.russ@gmail.com>
4039 Date: Tue Feb 24 21:12:35 2009 +1100
4043 Moved ali512x.h from include/asm-i386/ic/ to /include
4045 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
4047 commit 6d83e3ac61dcdbcb7f04664309a9689fe01c5704
4048 Author: Graeme Russ <graeme.russ@gmail.com>
4049 Date: Tue Feb 24 21:12:20 2009 +1100
4051 Rename SC520 Configuration Options
4053 Options are now all uniformly CONFIG_SYS_SC520_<option>
4055 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
4057 commit f62fb99941c625605aa16a0097b396a5c16d2c88
4058 Author: Trent Piepho <xyzzy@speakeasy.org>
4059 Date: Wed Feb 18 15:22:05 2009 -0800
4061 Fix all linker script to handle all rodata sections
4063 A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
4064 which needs to be added the the linker script. Instead of just adding this
4065 one section, we use a wildcard ".rodata*" to get all rodata linker section
4066 gcc has now and might add in the future.
4068 However, '*(.rodata*)' by itself will result in sub-optimal section
4069 ordering. The sections will be sorted by object file, which causes extra
4070 padding between the unaligned rodata.str.1.1 of one object file and the
4071 aligned rodata of the next object file. This is easy to fix by using the
4072 SORT_BY_ALIGNMENT command.
4074 This patch has not be tested one most of the boards modified. Some boards
4075 have a linker script that looks something like this:
4088 *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
4090 This means the start of rodata will no longer be 16 bytes aligned.
4091 However, the boundary between text and rodata/eh_frame is still aligned to
4092 16 bytes, which is what I think the real purpose of the ALIGN call is.
4094 Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
4096 commit 566b652c7cdb0e5e0529bb3d1eaffbd2bf45a032
4097 Author: Mike Frysinger <vapier@gentoo.org>
4098 Date: Wed Feb 11 18:26:08 2009 -0500
4100 remove bi_enet*addr from global data for all arches
4102 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4103 CC: Ben Warren <biggerbadderben@gmail.com>
4104 CC: Daniel Hellstrom <daniel@gaisler.com>
4105 CC: Michal Simek <monstr@seznam.cz>
4106 CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4107 CC: Scott McNutt <smcnutt@psyent.com>
4108 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4110 commit eb85aa594c1b57a1e3be9689b65171a137a36432
4111 Author: Mike Frysinger <vapier@gentoo.org>
4112 Date: Wed Feb 11 20:07:19 2009 -0500
4114 ppc: mark global bi_enet*addr as legacy
4116 The environment is the canonical storage location of the mac address, so
4117 we're killing off the global data location and moving everything to
4118 querying the env directly.
4120 In the ppc case, these things are part of the legacy ABI, so keep them
4121 around but mark them as legacy so no new code will touch them.
4123 Also stop calling load_sernum_ethaddr() since all boards now implement
4126 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4127 CC: Ben Warren <biggerbadderben@gmail.com>
4129 commit 9c150102bc1de375d36d97a1cc2dd0e9639b15df
4130 Author: Mike Frysinger <vapier@gentoo.org>
4131 Date: Wed Feb 11 20:09:52 2009 -0500
4133 boards: get mac address from env and move load_sernum_ethaddr() to board init
4135 The environment is the canonical storage location of the mac address, so
4136 we're killing off the global data location and moving everything to
4137 querying the env directly.
4139 Rather than have common ppc code call a board-specific function like
4140 load_sernum_ethaddr(), have each board call it in its own board-specific
4141 misc_init_r() function.
4143 The boards that get converted here are:
4148 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4149 CC: Ben Warren <biggerbadderben@gmail.com>
4150 CC: Stefan Roese <sr@denx.de>
4152 commit 92b50ffef978f05858a0ff4cbe88430bc51a28a2
4153 Author: Mike Frysinger <vapier@gentoo.org>
4154 Date: Wed Feb 11 19:55:01 2009 -0500
4156 cmc_pu2: get mac address from environment
4158 The environment is the canonical storage location of the mac address, so
4159 we're killing off the global data location and moving everything to
4160 querying the env directly.
4162 Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to
4163 handle this board specially in common ARM code.
4165 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4166 CC: Ben Warren <biggerbadderben@gmail.com>
4168 commit d8d21e699d7fcfb6ab11635110266dd09b7edc62
4169 Author: Mike Frysinger <vapier@gentoo.org>
4170 Date: Mon Feb 16 18:03:14 2009 -0500
4172 boards: move board_get_enetaddr() into board-specific init
4174 The environment is the canonical storage location of the mac address, so
4175 we're killing off the global data location and moving everything to
4176 querying the env directly.
4178 Rather than have the common ppc code have board-specific hooks, move the
4179 board_get_enetaddr() function into the board-specific init functions.
4181 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4182 CC: Ben Warren <biggerbadderben@gmail.com>
4184 commit f11e6ff5b1859d9213f0d501b3309e065f487543
4185 Author: Mike Frysinger <vapier@gentoo.org>
4186 Date: Wed Feb 11 19:39:55 2009 -0500
4188 arm: get mac address from environment
4190 The environment is the canonical storage location of the mac address, so
4191 we're killing off the global data location and moving everything to
4192 querying the env directly.
4194 Some warts are remaining and should be killed off (by moving the func to
4195 the appropriate board init code):
4196 - davinci_eth_set_mac_addr
4197 - cs8900_get_enetaddr
4200 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4201 CC: Ben Warren <biggerbadderben@gmail.com>
4203 commit 0107cf66f7346e8c7d6cf0fe99d2f265134afd59
4204 Author: Mike Frysinger <vapier@gentoo.org>
4205 Date: Wed Feb 11 19:36:20 2009 -0500
4207 nx823: get mac address from environment
4209 The environment is the canonical storage location of the mac address, so
4210 we're killing off the global data location and moving everything to
4211 querying the env directly.
4213 For the nx823, the serial number is moved out of load_sernum_ethaddr() and
4214 into misc_init_r() as is the env setup. This lets us kill off the former
4215 function in the process.
4217 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4218 CC: Ben Warren <biggerbadderben@gmail.com>
4220 commit 19b5b533ccd522abeb501d510750693c35e20456
4221 Author: Mike Frysinger <vapier@gentoo.org>
4222 Date: Wed Feb 11 18:27:18 2009 -0500
4224 lib_*/board.c: do not initialize bi_enet*addr in global data
4226 Since everyone is using the environment for mac address storage, there is
4227 no point in seeding the global data.
4229 The arches that are converted here:
4239 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4240 CC: Ben Warren <biggerbadderben@gmail.com>
4241 CC: Daniel Hellstrom <daniel@gaisler.com>
4242 CC: Michal Simek <monstr@seznam.cz>
4243 CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4244 CC: Scott McNutt <smcnutt@psyent.com>
4245 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4247 commit 740e8ba7d475c49c1b76058e1bf354e376b5c4e0
4248 Author: Mike Frysinger <vapier@gentoo.org>
4249 Date: Wed Feb 11 19:19:54 2009 -0500
4251 npe: get mac address from environment
4253 The environment is the canonical storage location of the mac address, so
4254 we're killing off the global data location and moving everything to
4255 querying the env directly.
4257 The resulting code can also be simplified even further.
4259 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4260 CC: Stefan Roese <sr@denx.de>
4261 CC: Ben Warren <biggerbadderben@gmail.com>
4263 commit 6bacfa6a8e9b264d37c1262fc1f3e948d1feab81
4264 Author: Mike Frysinger <vapier@gentoo.org>
4265 Date: Wed Feb 11 19:18:41 2009 -0500
4267 cpu/: get mac address from environment
4269 The environment is the canonical storage location of the mac address, so
4270 we're killing off the global data location and moving everything to
4271 querying the env directly.
4273 The cpus that get converted here:
4281 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4282 CC: Ben Warren <biggerbadderben@gmail.com>
4283 CC: John Rigby <jrigby@freescale.com>
4284 CC: Stefan Roese <sr@denx.de>
4286 commit 03f3d8d3b39cf85c0ce7ca903b436701e8aa610b
4287 Author: Mike Frysinger <vapier@gentoo.org>
4288 Date: Wed Feb 11 19:09:54 2009 -0500
4290 lan91c96/smc91111/smc911x: get mac address from environment
4292 The environment is the canonical storage location of the mac address, so
4293 we're killing off the global data location and moving everything to
4294 querying the env directly.
4296 Also, do not bother checking the EEPROM if the env is setup. This
4297 simplifies the code greatly.
4299 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4300 Signed-off-by: Wolfgang Dnek <wd@denx.de>
4301 CC: Ben Warren <biggerbadderben@gmail.com>
4302 CC: Rolf Offermanns <rof@sysgo.de>
4303 CC: Erik Stahlman <erik@vt.edu>
4304 CC: Daris A Nevil <dnevil@snmc.com>
4305 CC: Sascha Hauer <s.hauer@pengutronix.de>
4307 commit c527ce92511cbf723c2ca77bee1cf9ecf83dac81
4308 Author: Mike Frysinger <vapier@gentoo.org>
4309 Date: Wed Feb 11 19:14:09 2009 -0500
4311 sh_eth: get mac address from environment
4313 The environment is the canonical storage location of the mac address, so
4314 we're killing off the global data location and moving everything to
4315 querying the env directly.
4317 The sh_eth driver can also be simplified a bit by using enetaddr member of
4318 the eth_device structure.
4320 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4321 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4322 CC: Carlos Munoz <carlos@kenati.com>
4323 CC: Ben Warren <biggerbadderben@gmail.com>
4325 commit 0a5238cea90665c230297a8fd77bb0b3b61ca177
4326 Author: Mike Frysinger <vapier@gentoo.org>
4327 Date: Wed Feb 11 19:06:09 2009 -0500
4329 cs8900: get mac address from environment
4331 The environment is the canonical storage location of the mac address, so
4332 we're killing off the global data location and moving everything to
4333 querying the env directly.
4335 The cs8900 driver also changes slightly in that the hardware is not
4336 consulted if the mac address in the env is sane.
4338 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4339 CC: Marius Groeger <mgroeger@sysgo.de>
4340 CC: Ben Warren <biggerbadderben@gmail.com>
4342 commit c4b8762f11d337e6a9d90c227b2871d65d372469
4343 Author: Mike Frysinger <vapier@gentoo.org>
4344 Date: Wed Feb 11 19:04:25 2009 -0500
4346 bcm570x: get mac address from environment
4348 The environment is the canonical storage location of the mac address, so
4349 we're killing off the global data location and moving everything to
4350 querying the env directly.
4352 Since the address is in the PLM_DEVICE_BLOCK structure already, there is
4353 no need to pass the NodeAddress as a second parameter. So drop the second
4354 argument to the LM_SetMacAddress() function (and update the tigon3 driver
4357 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4358 CC: Ben Warren <biggerbadderben@gmail.com>
4360 commit d3f871482f06f6a4eaf4a3fafde84846bad87b4f
4361 Author: Mike Frysinger <vapier@gentoo.org>
4362 Date: Wed Feb 11 19:01:26 2009 -0500
4364 drivers/net/: get mac address from environment
4366 The environment is the canonical storage location of the mac address, so
4367 we're killing off the global data location and moving everything to
4368 querying the env directly.
4370 The drivers that get converted here:
4385 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4386 CC: Ben Warren <biggerbadderben@gmail.com>
4387 CC: Rolf Offermanns <rof@sysgo.de>
4388 CC: Stefan Roese <sr@denx.de>
4389 CC: Sascha Hauer <saschahauer@web.de>
4390 CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4391 CC: Greg Ungerer <greg.ungerer@opengear.com>
4392 CC: Xue Ligong <lgxue@hotmail.com>
4393 CC: Masami Komiya <mkomiya@sonare.it>
4394 CC: Curt Brune <curt@cucy.com>
4395 CC: Michal SIMEK <monstr@monstr.eu>
4397 commit b6b4625d175019e387e5b0f65a17322a78f6bb90
4398 Author: Mike Frysinger <vapier@gentoo.org>
4399 Date: Wed Feb 11 18:38:38 2009 -0500
4401 boards: get mac address from environment
4403 The boards that get converted here to use the environment for the mac
4404 address rather than global data:
4413 xilinx (the ones that use xilinx_enet)
4415 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4416 CC: Ben Warren <biggerbadderben@gmail.com>
4417 CC: Sangmoon Kim <dogoil@etinsys.com>
4418 CC: Heiko Schocher <hs@denx.de>
4419 CC: David Mueller <d.mueller@elsoft.ch>
4420 CC: Niklaus Giger <niklaus.giger@netstal.com>
4421 CC: Wolfgang Grandegger <wg@denx.de>
4422 CC: Dave Ellis <DGE@sixnetio.com>
4423 CC: Ricardo Ribalda <ricardo.ribalda@uam.es>
4425 commit 06a0c4381a65ed500c816a05b9ae7b207c3b1d4b
4426 Author: Mike Frysinger <vapier@gentoo.org>
4427 Date: Wed Feb 11 18:36:45 2009 -0500
4429 AmigaOneG3SE/enet: get mac address from environment
4431 Always use the MAC address that is stored in the environment first before
4432 falling back to the ROM. This also cuts out any comparison steps: if the
4433 mac in the env is sane, the ROM is never consulted.
4435 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4436 CC: Thomas Frieden <ThomasF@hyperion-entertainment.com>
4437 CC: Ben Warren <biggerbadderben@gmail.com>
4439 commit 56b555a644f3cbb1b3929cb52b61d3ce483885f5
4440 Author: Mike Frysinger <vapier@gentoo.org>
4441 Date: Wed Feb 11 18:52:38 2009 -0500
4443 nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()
4445 Since the ethernet layer handles updating of device addresses itself from
4446 the environment, there is no point in calling eth_set_enetaddr().
4448 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4449 CC: Ben Warren <biggerbadderben@gmail.com>
4451 commit 5013533467c1de731c2f0c9beb4b41ce3f07cbeb
4452 Author: Mike Frysinger <vapier@gentoo.org>
4453 Date: Wed Feb 11 18:54:07 2009 -0500
4455 lynxkdi: get mac address from environment
4457 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4458 CC: Ben Warren <biggerbadderben@gmail.com>
4460 commit 62c93d92f1b6266b2f33c5f403931b51cbd2a246
4461 Author: Mike Frysinger <vapier@gentoo.org>
4462 Date: Wed Feb 11 18:51:43 2009 -0500
4464 bootvx: get mac address from environment
4466 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4467 CC: Niklaus Giger <niklaus.giger@member.fsf.org>
4468 CC: Ben Warren <biggerbadderben@gmail.com>
4470 commit de2dff6ff89f98c6062f4d224fd434a3ede035d1
4471 Author: Mike Frysinger <vapier@gentoo.org>
4472 Date: Wed Feb 11 18:50:10 2009 -0500
4474 bdinfo: get mac address from environment
4476 Add a new print_eth() function to automate the eth*addr env var acquisition
4477 and display. Affects all arches.
4479 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4480 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4481 CC: Scott McNutt <smcnutt@psyent.com>
4482 CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4483 CC: Michal Simek <monstr@seznam.cz>
4484 CC: Daniel Hellstrom <daniel@gaisler.com>
4485 CC: Ben Warren <biggerbadderben@gmail.com>
4487 commit 95823ca0773356860e622ee3304a4b7cafcbf19a
4488 Author: Mike Frysinger <vapier@gentoo.org>
4489 Date: Wed Feb 11 18:23:48 2009 -0500
4491 net: get mac address from environment and use eth util funcs
4493 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4494 CC: Ben Warren <biggerbadderben@gmail.com>
4496 commit 500b6c51e4c41f4562cb48344af98deb7e342731
4497 Author: Mike Frysinger <vapier@gentoo.org>
4498 Date: Mon Oct 13 15:06:25 2008 -0400
4500 Blackfin: bfin_mac: force boards to setup the MAC themselves
4502 Since the on-chip MAC does not have an eeprom or similar interface, force
4503 all Blackfin boards that use this driver to setup the board data with a
4506 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4507 CC: Ben Warren <biggerbadderben@gmail.com>
4509 commit 6ff4137f2ad640e4fc8ea1b0455161ddff1f6730
4510 Author: Mike Frysinger <vapier@gentoo.org>
4511 Date: Wed Feb 11 14:12:34 2009 -0500
4513 doc/README.enetaddr: document proper MAC usage
4515 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4516 CC: Ben Warren <biggerbadderben@gmail.com>
4518 commit 3f6e6993e92fd0658da1746d1c84644612ee520b
4519 Author: Mike Frysinger <vapier@gentoo.org>
4520 Date: Thu Jan 29 19:43:44 2009 -0500
4522 net: new utility functions for working with enetaddr's
4524 Declare new utility functions for converting between the environment
4525 variables (eth*addr) and the binary MAC address representation. This way
4526 we can unify all the random places that already do this kind of thing.
4528 The functions in question:
4529 eth_parse_enetaddr - "..." -> {...}
4530 eth_getenv_enetaddr - env -> {...}
4531 eth_setenv_enetaddr - {...} -> env
4533 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4534 CC: Ben Warren <biggerbadderben@gmail.com>
4536 commit b6446b67758ea1e41223f0782924bb73fd0a89d0
4537 Author: Mike Frysinger <vapier@gentoo.org>
4538 Date: Tue Feb 17 00:00:53 2009 -0500
4540 convert print_IPaddr() to %pI4
4542 Now that our printf functions support the %pI4 modifier like the kernel,
4543 let's drop the inflexible print_IPaddr() function and covert over to the
4546 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4547 CC: Ben Warren <biggerbadderben@gmail.com>
4549 commit 6c6166f52983dac775e3852f9d0f49d033f27108
4550 Author: Mike Frysinger <vapier@gentoo.org>
4551 Date: Mon Feb 16 23:21:36 2009 -0500
4553 vsprintf: pull updates from Linux kernel
4555 This brings in support for the %p modifier which allows us to easily print
4556 out things like ip addresses, mac addresses, and pointers.
4558 It also converts the rarely used 'q' length modifier to the common 'L'
4559 modifier when dealing with quad types.
4561 While this new code is a bit larger (~1k .text), most of it should be made
4562 up by converting the existing ip/mac address code to use format modifiers.
4564 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4566 commit a43ea5cc6d612471fbc74f0a26b2bea5864aa1d6
4567 Author: Jon Smirl <jonsmirl@gmail.com>
4568 Date: Thu Mar 19 23:04:18 2009 -0400
4570 .gitignore for generated files in api_examples directory
4572 Add .gitignore for generated files in api_examples directory
4574 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
4575 Signed-off-by: Wolfgang Denk <wd@denx.de>
4577 commit 40281a9ca21a6b6d7b996b4d4eeaa19026337231
4578 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4579 Date: Wed Mar 18 12:27:04 2009 +0900
4581 net: sh_eth: Remove sh_eth_reset() from halt function
4583 sh_eth_reset is function to reset Ether IP.
4584 The MAC address is stored in IP, but it is initialized by this function.
4585 OS (e.g. Linux Kernel) can not use this device when initialized.
4586 This revises this problem.
4588 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4590 commit f8853d105da7d69bc92a5b4578f9b85234e558ec
4591 Author: Anatolij Gustschin <agust@denx.de>
4592 Date: Fri Mar 20 12:45:50 2009 +0100
4594 ppc4xx: Fix bug in PCI outbound map configuration for canyonlands
4596 PCI outbound address map configuration doesn't match the
4597 PCI memory address range covered by appropriate TLB entry
4598 configuration for canyonlands causing machine check
4599 exceptions while accessing PCI memory regions. This patch
4600 provides a fix for this issue.
4602 Kazuaki Ichinohe observed and reported this issue while
4603 testing display output with PCI ATI video card on canyonlands.
4605 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4606 Signed-off-by: Stefan Roese <sr@denx.de>
4608 commit 7a88601a34132548c3c591ea87ab3468b51121b0
4609 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
4610 Date: Fri Mar 6 10:09:37 2009 -0500
4612 CFI: geometry reversal for STMicro M29W320DT
4614 Follow up to the flash_fixup_stm to fix geometry reversal
4615 on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.
4617 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
4618 Signed-off-by: Stefan Roese <sr@denx.de>
4620 commit 069f4364d807d7fdea3de7385ad2f8d83c587aec
4621 Author: Mike Frysinger <vapier@gentoo.org>
4622 Date: Wed Feb 25 17:29:40 2009 -0500
4624 smc911x_eeprom: update register API
4626 The smc911x driver changed the naming convention for its register funcs,
4627 so update the eeprom code accordingly.
4629 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4630 CC: Ben Warren <biggerbadderben@gmail.com>
4632 commit 6a397ef0e6c58caab8bf427d447714bc9b3bb9d4
4633 Author: Grzegorz Bernacki <gjb@semihalf.com>
4634 Date: Tue Mar 17 10:06:39 2009 +0100
4636 mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
4638 Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select.
4639 To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new
4640 define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by
4641 Total5200 and will be used by digsy MTC and other boards with
4644 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
4646 commit 1b6275dfb173bd2edb8f208dd050d6f47ae39654
4647 Author: Heiko Schocher <hs@denx.de>
4648 Date: Thu Mar 12 07:37:34 2009 +0100
4650 8xx: add support for new keymile kmsupx4 board.
4652 This patch adds support for the kmsupx4 board from Keymile,
4653 based on a Freescale MPC852T CPU
4655 - serial console on SMC1
4658 - Ethernet over SCC3
4661 Signed-off-by: Heiko Schocher <hs@denx.de>
4663 commit d044954fe2a7e7a3dd104eb9c9d2104e38da2911
4664 Author: Heiko Schocher <hs@denx.de>
4665 Date: Thu Mar 12 07:37:28 2009 +0100
4667 8xx, mgsuvd: rename board to a more generic name
4669 renaming the "mgsuvd" board port into "km8xx", because
4670 there come more similar boards from keymile.
4671 Compiling the mgsuvd board with "make mgsuvd_config"
4674 Signed-off-by: Heiko Schocher <hs@denx.de>
4676 commit 18b2f35bde1672e074a3d5048383cb56fda745cb
4677 Author: Heiko Schocher <hs@denx.de>
4678 Date: Thu Mar 12 07:37:23 2009 +0100
4680 8xx, mgsuvd: Coding Style cleanup config file
4682 Signed-off-by: Heiko Schocher <hs@denx.de>
4684 commit 364123db6730d32330f818b65360d2cd27396667
4685 Author: Heiko Schocher <hs@denx.de>
4686 Date: Thu Mar 12 07:37:18 2009 +0100
4688 powerpc: common updates for keymile boards
4690 - added to keymile-common.h:
4693 - CONFIG_AUTO_COMPLETE
4694 - CONFIG_SYS_FLASH_PROTECTION
4696 - CONFIG_VERSION_VARIABLE
4697 - extracted common I2C settings for all boards
4698 - common default environment settings summarized
4700 Signed-off-by: Heiko Schocher <hs@denx.de>
4702 commit 506f391888b82d1b83bdd749c3cea9eb2fd64df8
4703 Author: Heiko Schocher <hs@denx.de>
4704 Date: Thu Mar 12 07:37:15 2009 +0100
4706 8xx, icache: enabling ICache not before running from RAM
4708 with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache
4709 is not enabled before code runs from RAM.
4711 Signed-off-by: Heiko Schocher <hs@denx.de>
4713 commit cabf7b9c83bd780a5805ddbb4c0ce431d5b9f9f3
4714 Author: Heiko Schocher <hs@denx.de>
4715 Date: Thu Mar 12 07:37:11 2009 +0100
4717 82xx, mgcoge: fix environment sector size
4719 Size of one environment sector is 0x20000.
4721 Signed-off-by: Heiko Schocher <hs@denx.de>
4723 commit 27057d416c7cc9eb1860953da8836352c07f13e9
4724 Author: Ladislav Michl <ladis@linux-mips.org>
4725 Date: Mon Mar 16 23:27:31 2009 +0100
4727 NetStar: config reindentation
4729 Fix indentation broken by symbol renames. "Sort" driver related definitons.
4731 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
4733 commit 8d8235f84d3ef3f29b7d14e741369b5824b5bb4a
4734 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4735 Date: Tue Mar 17 11:21:43 2009 +0000
4737 ColdFire: Fix incorrect definition
4739 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4741 commit 9017d9325a5067b2ab0d70a2d3c907620c9ab7f8
4742 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4743 Date: Mon Mar 2 19:16:45 2009 +0000
4745 ColdFire: Fix M5329EVB and M5373EVB nand issue
4747 The Nand flash was unable to read and write properly
4748 due to Nand Chip Select (nCE) setup was in reverse
4749 order. Also, increase the Nand time out value to 60.
4751 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4753 commit 42b68af1062f75bb4a91cf47e329a7e8100cd815
4754 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4755 Date: Tue Jan 27 15:19:35 2009 +0000
4757 ColdFire: PLATFORM_CPPFLAGS updates for new compiler
4759 Update PLATFORM_CPPFLAGS to accept 4.3.x version of
4762 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4764 commit d6e4baf49987fc6f75e8574c0c27301a828b3132
4765 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4766 Date: Tue Jan 27 12:57:47 2009 +0000
4768 ColdFire: Provide gzip image size V2 & V3 platforms
4770 Default gzip bootm size is 8MB. Some platforms require
4773 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4775 commit c3a9e6374210679a81f611c1bcf968988bc20e41
4776 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4777 Date: Wed Feb 18 11:49:31 2009 +0000
4779 ColdFire: Fix M54451 serial boot dram setup
4781 The serial boot dram extended/standard mode register was not
4782 setup and was using default DRAM setup causing the U-boot was
4783 unstable to boot up in serial mode.
4785 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4787 commit 32d11d58159a575f08a982cad8a5a941ffe5cc3d
4788 Author: arun c <arun.edarath@gmail.com>
4789 Date: Thu Dec 4 15:57:15 2008 +0530
4791 Coldfire: XL Bus minor fixes
4793 According to coldfire manual data timeout > address time out
4794 also use correct macro to program XARB_CFG
4796 Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
4798 commit 65d8bc94d8214812ccdf3372d3fef845cf4ec2e5
4799 Author: Scott Wood <scottwood@freescale.com>
4800 Date: Tue Mar 17 12:06:04 2009 -0500
4802 NAND: Have nboot accept .e and .i as legacy no-ops.
4804 This was intended to happen before, but a trivial bug prevented it.
4806 Signed-off-by: Scott Wood <scottwood@freescale.com>
4808 commit 0987505540918b2464b73069af3a5b766dbd3ceb
4809 Author: Ladislav Michl <ladis@linux-mips.org>
4810 Date: Fri Mar 13 14:38:19 2009 +0100
4812 NAND: Make nboot skip bad blocks
4814 nboot command currently does not skip bad blocks and gives read error when
4815 loading image stored over bad block. With patch applied, nboot works as
4818 Device 0 bad blocks:
4825 Loading from NAND 128MiB 3,3V 8-bit, offset 0x2c00000
4826 Image Name: Linux-2.6.22-omap1
4827 Created: 2008-11-20 23:44:32 UTC
4828 Image Type: ARM Linux Kernel Image (uncompressed)
4829 Data Size: 1052520 Bytes = 1 MB
4830 Load Address: 10008000
4831 Entry Point: 10008000
4832 Skipping bad block 0x02cc0000
4833 Automatic boot of image at addr 0x10400000 ...
4836 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
4837 Signed-off-by: Scott Wood <scottwood@freescale.com>
4839 commit 0b2f38fe3c4555dd2b81c69880403c13ad723153
4840 Author: Stefan Roese <sr@denx.de>
4841 Date: Thu Mar 12 07:27:25 2009 +0100
4843 ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration
4845 This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
4846 the DDR2 configuration to only use one CS (rank). As this code is most
4847 likely copied from the original Sequoia version, this error was copied
4850 This patch also removes some dead code.
4852 Signed-off-by: Stefan Roese <sr@denx.de>
4854 commit 9199b9cc8f56aca26504b48cf702176208f46e54
4855 Author: Stefan Roese <sr@denx.de>
4856 Date: Thu Mar 12 07:24:40 2009 +0100
4858 ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration
4860 This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
4861 the DDR2 configuration to only use one CS (rank). As this code is most
4862 likely copied from the original Sequoia version, this error was copied
4865 Signed-off-by: Stefan Roese <sr@denx.de>
4867 commit ee86fd15e1ccda4be41f1dba82b8c9efea9a3145
4868 Author: Mikhail Zolotaryov <lebon@lebon.org.ua>
4869 Date: Wed Mar 11 10:54:46 2009 +0200
4871 Fix AMCC Sequoia board DDR memory configuration
4873 Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D)
4874 specifies that BankSel#1 is not connected, while bootloader memory
4875 configuration is (board/amcc/sequoia/sdram.c):
4876 mtsdram(DDR0_10, 0x00000300);
4877 i.e. both Chip Selects used - not correct.
4879 If we change to correct value here:
4880 mtsdram(DDR0_10, 0x00000100);
4881 memory is accessible OK also.
4883 Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
4884 Signed-off-by: Stefan Roese <sr@denx.de>
4886 commit b3dd629e78870ba2dc9f8032978721c0fa02a856
4887 Author: Wolfgang Denk <wd@denx.de>
4888 Date: Sun Mar 15 22:40:09 2009 +0100
4892 Update CHANEGLOG, fix minor coding style issue.
4894 Signed-off-by: Wolfgang Denk <wd@denx.de>
4896 commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31
4897 Author: Jerry Van Baren <gvb.uboot@gmail.com>
4898 Date: Fri Mar 13 11:40:10 2009 -0400
4900 mpc83xx: Add bank configuration to FSL spd_sdram.c
4902 The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
4905 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4906 Acked-by: Dave Liu <daveliu@freescale.com>
4907 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4909 commit b581626c1e2474a3dadf69d4f0e0582eccbc4235
4910 Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
4911 Date: Fri Mar 13 08:58:14 2009 +0100
4913 mpc83xx: correctly set encryption and I2C bus 0 clock
4915 This patch makes sure the correct mask is applied when setting
4916 the encryption and I2C bus 0 clock in SCCR.
4917 Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
4920 Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
4921 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4923 commit e6a6a704151c2d7e4a7b485545b48a6020ccca17
4924 Author: Dirk Behme <dirk.behme@googlemail.com>
4925 Date: Thu Mar 12 19:30:50 2009 +0100
4927 OMAP3: Add support for OMAP3 die ID
4929 Read and store OMAP3 die ID in U-Boot environment.
4931 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4933 commit f949bd8d089ec3059c460ac829c0d919e1d7af0e
4934 Author: Jon Smirl <jonsmirl@gmail.com>
4935 Date: Wed Mar 11 15:08:56 2009 -0400
4937 MPC5200 FEC MII speed register
4939 Set a non-zero speed in the MII register so that MII commands will work.
4941 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
4943 commit 94a353611b93ac4cb4434a5f7e98aa0902da919e
4944 Author: Yusuke.Goda <goda.yusuke@renesas.com>
4945 Date: Fri Mar 13 16:08:18 2009 +0900
4947 sh: ap325rxa: Change the wait cycle in the area 5
4949 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
4950 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4952 commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac
4953 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4954 Date: Wed Feb 25 16:04:26 2009 +0900
4956 sh: Fix cannot work rtl8139 on r2dplus
4958 The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
4961 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4962 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4964 commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f
4965 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4966 Date: Fri Feb 27 18:35:41 2009 +0900
4968 sh: Add netdev header fixing of warning/build
4970 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4971 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4973 commit ada9318252f51c2626e9837c623f9812b0308dea
4974 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4975 Date: Tue Mar 3 15:11:17 2009 +0900
4977 sh: Add support 32-Bit Extended Address Mode to sh7785lcr
4979 We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
4980 for this mode. This command changes PMB for using 512MB system memory.
4982 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4983 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4985 commit 06b18163b57e6b0349b0c299222d50e7b1e41e50
4986 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4987 Date: Wed Feb 25 14:26:42 2009 +0900
4989 sh: Add some register value configurable to PCI of SH7780
4991 Some register value was hardcoded for System memory size 128MB and
4992 memory offset 0x08000000. This patch fixed the problem.
4994 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4995 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4997 commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c
4998 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4999 Date: Wed Feb 25 14:26:52 2009 +0900
5001 sh: Add system memory registration to PCI for SH4
5003 It is necessary for some pci device driver.
5005 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5006 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5008 commit b3061b40db691245a7bb9a55354b4edacbf3902d
5009 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5010 Date: Wed Feb 25 14:26:55 2009 +0900
5012 sh: Add value for PCI system memory registration of sh7785lcr
5014 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5015 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5017 commit 6d84ae3956a6cd7aebd86f661130752594e60124
5018 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5019 Date: Tue Mar 3 15:11:08 2009 +0900
5021 sh: Add macros for SH-4A 32-Bit Address Extended Mode
5023 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5024 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5026 commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1
5027 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5028 Date: Tue Feb 3 13:35:05 2009 +0900
5030 sh: use write{8,16,32} in ms7720se lowlevel_init
5032 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5033 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5035 commit 0452352df118bc9dd684a056aaaa5fb4aed1178a
5036 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
5037 Date: Mon Mar 9 18:07:53 2009 -0500
5039 tsec: report when there is no vendor specific PHY support
5041 Commit af1c2b84 added a generic phy support, with an ID of zero
5042 and a 32 bit mask; meaning that it will match on any PHY ID.
5044 The problem is that there is a test that checked if a matching
5045 PHY was found, and if not, it printed the non-matching ID.
5046 But since there will always be a match (on the generic PHY,
5047 worst case), this test will never trip.
5049 In the case of a misconfigured PHY address, or of a PHY that
5050 isn't explicitly supported outside of the generic support,
5051 you will never see the ID of 0xffffffff, or the ID of the
5052 real (but unsupported) chip. It will silently fall through
5053 onto the generic support.
5055 This change makes that test useful again, and ensures that
5056 the selection of generic PHY support doesn't happen without
5057 some sort of notice. It also makes it explicitly clear that
5058 the generic PHY must be last in the PHY table.
5060 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5061 Acked-by: Andy Fleming <afleming@freescale.com>
5063 commit c279dfc10186ceba78d3862036f158750e86599a
5064 Author: Wolfgang Denk <wd@denx.de>
5065 Date: Mon Mar 9 10:53:05 2009 +0100
5067 SIMPC8313 board: fix out of tree building.
5069 Fix typo in makefile which broke out of tree builds.
5071 Also use expolicit "rm" instead of "ln -sf" which is known to be
5074 Signed-off-by: Wolfgang Denk <wd@denx.de>
5075 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5077 commit 49b5aff491bd574935ecaf8545152066a25eff3d
5078 Author: ksi@koi8.net <ksi@koi8.net>
5079 Date: Mon Feb 23 10:53:13 2009 -0800
5081 Add eTSEC 1/2 IO override control (corrected)
5083 This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)
5085 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
5087 commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc
5088 Author: Andy Fleming <afleming@freescale.com>
5089 Date: Fri Mar 6 19:05:52 2009 -0600
5091 fsl: Remove unnecessary debug printfs
5093 These were left in accidentally, and are not really useful unless the
5094 code is as broken as it was when it was being developed.
5096 Signed-off-by: Andy Fleming <afleming@freescale.com>
5098 commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0
5099 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5100 Date: Tue Feb 24 02:37:59 2009 -0600
5102 Fix mpc85xx ddr-gen3 ddr_sdram_cfg.
5104 Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
5105 sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.
5107 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
5109 commit a922fdb87af25c25c032424908dcf60fbf3250ea
5110 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5111 Date: Tue Feb 24 06:13:10 2009 +0100
5113 PXA: timer use do_div and simplify it
5115 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5117 commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3
5118 Author: Wolfgang Denk <wd@denx.de>
5119 Date: Mon Mar 9 10:51:39 2009 +0100
5121 SIMPC8313 board: fix out of tree building.
5123 Fix typo in makefile which broke out of tree builds.
5125 Also use expolicit "rm" instead of "ln -sf" which is known to be
5128 Signed-off-by: Wolfgang Denk <wd@denx.de>
5130 commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a
5131 Author: Heiko Schocher <hs@denx.de>
5132 Date: Tue Feb 24 11:30:51 2009 +0100
5134 8360, kmeter1: added bootcount feature.
5136 add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.
5138 The bootcounter uses 8 bytes from the muram,
5139 because no other memory was found on this
5140 CPU for the bootcount feature. So we must
5141 correct the muram size in DTS before booting
5144 This feature is actual only implemented for
5145 MPC8360, because not all 83xx CPU have qe,
5146 and therefore no muram, which this feature
5149 Signed-off-by: Heiko Schocher <hs@denx.de>
5150 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5152 commit 1e7ed2565031e01abc18c713030a0a9829c07684
5153 Author: Heiko Schocher <hs@denx.de>
5154 Date: Tue Feb 24 11:30:48 2009 +0100
5156 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
5158 old code implemented the QE_ENET10 errata only for Silicon
5159 Revision 2.0. New code reads now the Silicon Revision
5160 register and sets dependend on the Silicon Revision the
5161 values as advised in the QE_ENET10 errata.
5163 Signed-off-by: Heiko Schocher <hs@denx.de>
5164 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5166 commit 605f78e34a3f0103693b891f2573edd352e7d495
5167 Author: Heiko Schocher <hs@denx.de>
5168 Date: Tue Feb 24 11:30:44 2009 +0100
5170 83xx, kmeter1: updates for 2009.03
5173 HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
5174 HRCWH_LALE_EARLY added
5175 - DDR-SDRAM settings modified. This solves sporadically
5176 problems with this memory.
5177 - CS1 now 128 MB window size
5178 - CS3 now 512 MB window size
5180 - MTDPARTS_DEFAULT defined
5181 - CONFIG_HOSTNAME added
5182 - MONITOR_LEN now 384 KB
5184 Signed-off-by: Heiko Schocher <hs@denx.de>
5185 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5187 commit 118cbe3c35c898f8d020b29d6dc180307cacf147
5188 Author: Heiko Schocher <hs@denx.de>
5189 Date: Tue Feb 24 11:30:40 2009 +0100
5191 83xx, kmeter1: autodetect size of DDR II RAM
5193 it is possible that some board variants have different DDR II
5194 RAM sizes. So we autodetect the size of the assembled RAM.
5196 Signed-off-by: Heiko Schocher <hs@denx.de>
5197 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5199 commit c1bce4fff750d734b1fa7467eb08f93902c97ca6
5200 Author: Heiko Schocher <hs@denx.de>
5201 Date: Tue Feb 24 11:30:37 2009 +0100
5203 83xx, i2c: add mux support for fsl_i2c
5205 This patch adds I2C mux support for the fsl_i2c driver. This
5206 allows you to add "new" i2c busses, which are reached over
5207 i2c muxes. For more infos, please look in the README and
5208 search for CONFIG_I2C_MUX.
5210 Signed-off-by: Heiko Schocher <hs@denx.de>
5211 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5213 commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803
5214 Author: Heiko Schocher <hs@denx.de>
5215 Date: Tue Feb 24 11:30:34 2009 +0100
5217 83xx, kmeter1: add I2C, dtt, eeprom support
5219 This patch adds I2C support for the Keymile kmeter1 board.
5220 It uses the First I2C Controller from the CPU, for
5221 accessing 4 temperature sensors, an eeprom with IVM data
5222 and the booteeprom over a pca9547 mux.
5224 Signed-off-by: Heiko Schocher <hs@denx.de>
5225 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5227 commit db1d72afd77287bc8577210f3f71ab249dcf146f
5228 Author: Heiko Schocher <hs@denx.de>
5229 Date: Tue Feb 24 11:30:30 2009 +0100
5231 i2c, dtt: move dtt_init () to board_init_r ()
5233 In case where a board not uses CONFIG_POST, it is not
5234 necessary to init the DTTs when running from flash.
5236 Signed-off-by: Heiko Schocher <hs@denx.de>
5237 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5239 commit 5b0055547f0246908b79cc300170d87380b69e18
5240 Author: Dave Liu <daveliu@freescale.com>
5241 Date: Wed Feb 25 12:31:32 2009 +0800
5243 83xx: Fix some bugs in spd sdram code
5245 1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
5246 tRTP according to DDR2 JEDEC spec.
5247 2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
5248 3. add the support of DDR2-533,667,800 DIMMs
5250 5. make the AL to min to gain better performance.
5252 The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
5253 MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.
5256 Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5258 Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5259 Signed-off-by: Dave Liu <daveliu@freescale.com>
5260 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5262 commit b7be63abec45858c044f0fbd6aeef524c4663f9b
5263 Author: Valeriy Glushkov <gvv@lstec.com>
5264 Date: Wed Feb 4 18:27:49 2009 +0200
5266 MPC8349ITX: several config issues fixed
5268 The previous version rebooted forever with DDR bigger than 256MB.
5269 Access the DS1339 RTC chip is on I2C1 bus.
5272 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
5273 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5275 commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
5276 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5277 Date: Thu Feb 19 18:20:39 2009 +0300
5279 mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
5281 The SerDes initialization should be finished before negating the reset
5282 signal according to the reference manual. This isn't an issue on real
5283 hardware, but we'd better stick to the specifications anyway.
5285 Suggested-by: Liu Dave <DaveLiu@freescale.com>
5286 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5287 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5289 commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f
5290 Author: Heiko Schocher <hs@denx.de>
5291 Date: Wed Feb 25 12:28:32 2009 +0100
5293 i2c, dtt: move dtt_init () to board_init_r ()
5295 it is not necessary to init the DTTs so early,
5296 so move this init to board_init_r ().
5298 Signed-off-by: Heiko Schocher <hs@denx.de>
5300 commit 00cc5595a7caac8066b408774383a956c2e26797
5301 Author: Anatolij Gustschin <agust@denx.de>
5302 Date: Wed Feb 25 20:28:13 2009 +0100
5304 lcd: Fix compilation warning in common/lcd.c
5306 Fix following warning while compilation for mcc200 board:
5308 lcd.c: In function 'lcd_display_bitmap':
5309 lcd.c:625: warning: unused variable 'cmap'
5311 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5313 commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674
5314 Author: Graeme Russ <graeme.russ@gmail.com>
5315 Date: Tue Feb 24 21:11:24 2009 +1100
5317 Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb)
5319 Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb
5321 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
5323 commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215
5324 Author: Mike Frysinger <vapier@gentoo.org>
5325 Date: Mon Feb 23 10:29:47 2009 -0500
5327 smc911x: split out useful defines/functions into local header
5329 The smc911x driver has a lot of useful defines/functions which can be used
5330 by pieces of code (such as example eeprom programmers). Rather than
5331 forcing each place to duplicate these defines/functions, split them out
5332 of the smdc911x driver into a local header.
5334 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5335 Acked-by: Ben Warren <biggerbadderben@gmail.com>
5336 CC: Sascha Hauer <s.hauer@pengutronix.de>
5337 CC: Guennadi Liakhovetski <lg@denx.de>
5338 CC: Magnus Lilja <lilja.magnus@gmail.com>
5339 CC: Ben Warren <biggerbadderben@gmail.com>
5341 commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1
5342 Author: Guennadi Liakhovetski <lg@denx.de>
5343 Date: Tue Feb 24 10:44:02 2009 +0100
5345 ARM: add an "eet" variant of the imx31_phycore board
5347 The "eet" variant of the imx31_phycore board has an OLED display, using a
5348 s6e63d6 display controller on the first SPI interface, using GPIO57 as a
5349 chip-select for it. With this configuration you can display 256 colour BMP
5350 images in 16-bit RGB (RGB565) LCD mode.
5352 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5353 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5355 commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f
5356 Author: Guennadi Liakhovetski <lg@denx.de>
5357 Date: Fri Feb 6 10:37:57 2009 +0100
5359 video: add an i.MX31 framebuffer driver
5361 Add a driver for the Synchronous Display Controller and the Display
5362 Interface on i.MX31, using IPU for DMA channel setup. So far only
5363 displaying of bitmaps is supported, no text output.
5365 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5366 Acked-by: Anatolij Gustschin <agust@denx.de>
5368 commit b245e65ee3c4cce3ccf008a21f4528239655876c
5369 Author: Guennadi Liakhovetski <lg@denx.de>
5370 Date: Fri Feb 6 10:37:53 2009 +0100
5372 LCD: support 8bpp BMPs on 16bpp displays
5374 This patch also simplifies some ifdefs in lcd.c, introduces a generic
5375 vidinfo_t, which new drivers are encouraged to use and old drivers to switch
5378 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5379 Acked-by: Anatolij Gustschin <agust@denx.de>
5381 commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1
5382 Author: Mark Jackson <mpfj@mimc.co.uk>
5383 Date: Fri Feb 6 10:37:49 2009 +0100
5385 Add 16bpp BMP support
5387 This patch adds 16bpp BMP support to the common lcd code.
5389 Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.
5391 At the moment it's only been tested on the MIMC200 AVR32 board, but extending
5392 this to other platforms should be a simple task !!
5394 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
5395 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5396 Acked-by: Anatolij Gustschin <agust@denx.de>
5398 commit 689551c5ff1b394b88412f3df22144e79468d3a9
5399 Author: Guennadi Liakhovetski <lg@denx.de>
5400 Date: Fri Feb 6 10:37:41 2009 +0100
5402 A driver for the S6E63D6 SPI display controller from Samsung
5404 This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
5405 It only provides access to controller's registers so the client can freely
5408 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5409 Acked-by: Anatolij Gustschin <agust@denx.de>
5411 commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d
5412 Author: Guennadi Liakhovetski <lg@denx.de>
5413 Date: Fri Feb 13 09:26:40 2009 +0100
5415 i.MX31: support GPIO as a chip-select in the mxc_spi driver
5417 Some SPI devices have special requirements on chip-select handling.
5418 With this patch we can use a GPIO as a chip-select and strictly follow
5419 the SPI_XFER_BEGIN and SPI_XFER_END flags.
5421 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5422 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5424 commit b30de3cccf8867566cd314e7c7033904afa5dc9d
5425 Author: Guennadi Liakhovetski <lg@denx.de>
5426 Date: Sat Feb 7 01:18:07 2009 +0100
5428 i.MX31: add a simple gpio driver
5430 This is a minimal driver, so far only managing output. It will
5431 be used by the mxc_spi.c driver.
5433 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5434 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5436 commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f
5437 Author: Guennadi Liakhovetski <lg@denx.de>
5438 Date: Sat Feb 7 00:09:12 2009 +0100
5440 i.MX31: fix SPI driver for shorter than 32 bit
5442 Fix setting the SPI Control register, 8 and 16-bit transfers
5443 and a wrong pointer in the free routine in the mxc_spi driver.
5445 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5446 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5448 commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496
5449 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5450 Date: Thu Feb 19 18:20:52 2009 +0300
5452 mpc83xx: MPC837XERDB: Add PCIe support
5454 On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
5455 slots. Let's support them.
5457 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5458 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5460 commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b
5461 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5462 Date: Thu Feb 19 18:20:50 2009 +0300
5464 mpc83xx: PCI: Fix hard-coded first_busno value
5466 We should use pci_last_busno() in pci_init_bus(), otherwise we'll
5467 erroneously re-use PCI0's first_busno for PCI1 hoses.
5469 NOTE: The patch is untested. All MPC83xx FSL boards I have have
5470 PCI1 in miniPCI form, for which I don't have any cards handy.
5472 But looking in cpu/mpc85xx/pci.c:
5474 #ifdef CONFIG_MPC85XX_PCI2
5475 hose = &pci_hose[1];
5477 hose->first_busno = pci_hose[0].last_busno + 1;
5479 And considering that we do the same for MPC83xx PCI-E support,
5480 I think this patch is correct.
5482 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5483 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5485 commit a5878d427128c1a9226045ebe05fbadaa02eb9dd
5486 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5487 Date: Thu Feb 19 18:20:46 2009 +0300
5489 mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
5491 This patch fixes copy-paste issue: pci_hose[0]'s first and last
5492 busnos were used to fixup pci1's nodes.
5494 We don't see this bug triggering only because Linux reenumerate
5497 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5498 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5500 commit b24a99f6666ac278ec9f9c1334518af828833d19
5501 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5502 Date: Thu Feb 19 18:20:44 2009 +0300
5504 mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
5506 This patch fixes an issue in config space read accessors: we should
5507 fill-in the value even if we fail (e.g. skipping devices), otherwise
5508 CONFIG_PCI_SCAN_SHOW reports bogus values during boot up.
5510 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5511 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5513 commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022
5514 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5515 Date: Thu Feb 19 18:20:42 2009 +0300
5517 mpc83xx: PCIe: Don't start bus enumeration at 0
5519 Currently we assign first_busno = 0 for the first PCIe hose, but this
5520 scheme won't work if we have ordinary PCI hose already registered (its
5521 first_busno value is 0 too).
5523 The old code worked fine only because we have PCI disabled on
5524 MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3
5525 "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
5526 But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
5529 So, to fix the issue, we should use pci_last_busno() + 1 for the
5530 first_busno (i.e. last available busno).
5532 Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
5533 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5534 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5536 commit cc2a8c7751ddbae3116660064f446888538b93e9
5537 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5538 Date: Thu Feb 19 18:20:41 2009 +0300
5540 PCI: Add pci_last_busno() helper
5542 This is just a handy routine that reports last PCI busno: we walk
5543 down all the hoses and return last hose's last_busno.
5545 Will be used by PCI/PCIe initialization code.
5547 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5548 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5550 commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
5551 Author: Becky Bruce <beckyb@kernel.crashing.org>
5552 Date: Mon Feb 23 13:56:51 2009 -0600
5554 MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
5556 Currently, we get 256MB as the default, but since all the 86xx
5557 board configs define a 2G BAT mapping for RAM, raise default
5560 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
5561 Acked-by: Jon Loeliger <jdl@freescale.com>
5563 commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa
5564 Author: Becky Bruce <beckyb@kernel.crashing.org>
5565 Date: Thu Feb 12 10:43:32 2009 -0600
5567 mpc8641hpcn: Indicate 36-bit addr map in boot messages
5569 If 36-bit addressing is enabled, print a message on the console
5572 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
5574 commit 58a518c3d8a2c7de11d414e8b903495daee7dc7e
5575 Author: Mark Jackson <mpfj-list@mimc.co.uk>
5576 Date: Fri Feb 13 15:48:18 2009 +0000
5578 Setup extra MIMC200 chip selects
5580 Added code to setup the extra Flash and FRAM chip selects as used on the
5583 V2 moves the init code from the common "cpu.c" file into the board specific
5586 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
5587 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5589 commit 80534886a72a0088eef9e781a8e0b7d04ea41f36
5590 Author: Mark Jackson <mpfj@mimc.co.uk>
5591 Date: Mon Nov 24 12:10:56 2008 +0000
5593 MIMC200: tidy GCLK init code
5595 Change the MIMC200 startup code to use the built-in (rather than
5596 hard-coded) funtions for setting up gclk outputs.
5598 We'll also move the code to the new, more-appropriate
5599 board_postclk_init() routine.
5601 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
5602 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5604 commit b423f94063bf04e92047ff85c7e53441eb3b712b
5605 Author: Olav Morken <olavmrk@gmail.com>
5606 Date: Fri Jan 23 12:56:32 2009 +0100
5608 AVR32: Must add NOPs after disabling interrupts for AT32UC3A0512ES
5610 The AT32UC3A0512ES chip has a bug when disabling interrupts. As a
5611 workaround, two NOPs can be inserted.
5613 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
5614 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
5615 Signed-off-by: Olav Morken <olavmrk@gmail.com>
5616 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5618 commit f5f652fa91aa69db8117d211af1b4fe09f2edd3b
5619 Author: Gunnar Rangoy <gunnar@rangoy.com>
5620 Date: Fri Jan 23 12:56:29 2009 +0100
5622 AVR32: Make GPIO implmentation cpu dependent
5624 There are some differences in the implementation of GPIO in the
5625 at32uc chip compared to the ap700x series.
5627 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
5628 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
5629 Signed-off-by: Olav Morken <olavmrk@gmail.com>
5630 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5632 commit a38de083d2979db3680f0d0978c509a172c8fa00
5633 Author: Olav Morken <olavmrk@gmail.com>
5634 Date: Fri Jan 23 12:56:28 2009 +0100
5636 AVR32: Move addrspace.h to arch-directory, and move some functions from io.h to addrspace.h
5638 The AVR32A architecture (which AT32UC3A-series is based on) has a
5639 different memory layout than the AVR32B-architecture. This patch moves
5640 addrspace.h to an arch-dependent directory in preparation for
5641 AT32UC3A-support. It also moves some address-space manipulation
5642 functions from io.h to addrspace.h.
5644 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
5645 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
5646 Signed-off-by: Olav Morken <olavmrk@gmail.com>
5647 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5649 commit d8f2aa3298610b44127dbc4796d8038aa5847e0b
5650 Author: Olav Morken <olavmrk@gmail.com>
5651 Date: Fri Jan 23 12:56:27 2009 +0100
5653 AVR32: Make cacheflush cpu-dependent
5655 The AT32UC3A series of processors doesn't contain any cache, and issuing
5656 cache control instructions on those will cause an exception. This commit
5657 makes cacheflush.h arch-dependent in preparation for the AT32UC3A-support.
5659 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
5660 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
5661 Signed-off-by: Olav Morken <olavmrk@gmail.com>
5662 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5664 commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
5665 Author: Heiko Schocher <hs@denx.de>
5666 Date: Tue Feb 10 09:38:52 2009 +0100
5668 netloop: speed up NetLoop
5670 NetLoop polls every cycle with getenv some environment variables.
5671 This is horribly slow, especially when the environment is big.
5673 This patch reads only the environment variables in NetLoop,
5674 when they were changed.
5676 Also moved the init part of the NetLoop function in a seperate
5679 Signed-off-by: Heiko Schocher <hs@denx.de>
5680 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5682 commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87
5683 Author: Mike Frysinger <vapier@gentoo.org>
5684 Date: Mon Dec 22 02:56:07 2008 -0500
5686 smc911x_eeprom: new example app for managing newer SMC parts
5688 A forward port of the last version to work with the newer smc911x driver.
5689 I only have a board with a LAN9218 part on it, so that is the only one
5690 I've tested. But there isn't anything in this that would make it terribly
5691 chip specific afaik.
5693 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5694 CC: Sascha Hauer <s.hauer@pengutronix.de>
5695 CC: Guennadi Liakhovetski <lg@denx.de>
5696 CC: Magnus Lilja <lilja.magnus@gmail.com>
5697 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5699 commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6
5700 Author: Pieter Henning <phenning@vastech.co.za>
5701 Date: Sun Feb 22 23:17:15 2009 -0800
5703 Added Vitesse VSC8211 definitions to TSEC driver
5705 Added the struct containing PHY settings for the Vitesse VSC8211 phy to
5706 the phy_info list in tsec.c
5708 Signed-off-by: Pieter Henning <phenning@vastech.co.za>
5709 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5711 commit 32688e572ff96715b41420e9a7f280db6c399b65
5712 Author: Wolfgang Denk <wd@denx.de>
5713 Date: Mon Feb 23 00:22:21 2009 +0100
5715 Update CHANGELOG; Prepare 2009.03-rc1
5717 Signed-off-by: Wolfgang Denk <wd@denx.de>
5719 commit 80b827c2b78329c6503b271e43d9eb693d644710
5720 Author: Wolfgang Denk <wd@denx.de>
5721 Date: Sun Feb 22 23:45:40 2009 +0100
5723 ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5
5725 The file was generated from building versatile_defconfig.
5727 Signed-off-by: Wolfgang Denk <wd@denx.de>
5729 commit 14209ac13ff631e36c9a9dd426c59c2e2f5dab00
5730 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5731 Date: Sun Feb 22 14:24:11 2009 +0900
5733 MIPS: Fix GCC-4.2 'discards qualifiers from pointer target type' warnings
5735 Compiling dbau1x00 and gth2 boards with GCC-4.2, you would see new warnings
5738 skuribay@ubuntu:u-boot.git$ ./MAKEALL dbau1000
5739 Configuring for dbau1x00 board...
5740 au1x00_eth.c: In function 'au1x00_send':
5741 au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
5742 au1x00_eth.c: In function 'au1x00_recv':
5743 au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
5744 au1x00_eth.c: In function 'au1x00_init':
5745 au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
5746 au1x00_eth.c: In function 'au1x00_recv':
5747 au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
5748 au1x00_eth.c: In function 'au1x00_init':
5749 au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
5750 au1x00_eth.c: In function 'au1x00_send':
5751 au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
5753 We're passing a volatile pointer to a function which is expecting a non-
5754 volatile pointer. That's potentially dangerous, so gcc warns about it.
5755 Confirmed with ELDK 4.2 (GCC 4.2.2) and Sourcey G++ 4.2 (GCC 4.2.3).
5757 To fix this, we add a volatile attribute to the argument in question.
5758 The virt_to_phys function in Linux kernel also does the same thing.
5760 Signed-off-by: Stefan Roese <sr@denx.de>
5761 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5763 commit aba45c85b22f8c57fc2fedba8e948e06c2e2f5b3
5764 Author: Dirk Behme <dirk.behme@googlemail.com>
5765 Date: Fri Feb 20 17:51:28 2009 +0100
5767 OMAP3: Clean up MMC code
5769 Clean up OMAP3 MMC code:
5771 * Convert register access to struct & readx/writex style
5772 * Replace hardcode values by macros
5773 * Remove macro defined twice
5775 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5777 commit cfcdf4a9b361d015c0debac73fbf7c511df4a934
5778 Author: Dirk Behme <dirk.behme@googlemail.com>
5779 Date: Thu Feb 12 18:55:43 2009 +0100
5781 OMAP3: Pandora: Update pin mux
5783 Clock pin must have input enabled for MMC3 to work.
5784 Also enable pull-ups for cmd/data lines to be consistent
5785 with remaining MMC host pin setup.
5787 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
5789 commit 6530a8bf8a0274b9419141e4c2c5a235cce5380f
5790 Author: Dirk Behme <dirk.behme@googlemail.com>
5791 Date: Thu Feb 12 18:55:42 2009 +0100
5793 OMAP3: Add OMAP3 auto detection
5795 This patch adds OMAP3 cpu type auto detection based on OMAP3 register
5796 and removes hardcoded values.
5798 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
5799 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5801 commit f956fd0338f4990793a10f767929ba4963665261
5802 Author: Dirk Behme <dirk.behme@googlemail.com>
5803 Date: Thu Feb 12 18:55:41 2009 +0100
5805 OMAP3: Beagle: Add board revision detection
5807 With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
5808 which might need different software handling. For this, GPIO pin 171 (GPIO
5809 module 6, offset 11) can be used to check for board revision. If this pin
5810 is low, we have a rev C board. Else it must be a revision Ax or Bx board.
5812 To handle board differences you can call function beagle_get_revision().
5815 if (beagle_get_revision()) {
5817 /* do special revision C stuff here */
5821 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5823 commit 288f3cd912918b97919d13b6f7fb13fbddf74d68
5824 Author: Dirk Behme <dirk.behme@googlemail.com>
5825 Date: Thu Feb 12 18:55:40 2009 +0100
5827 OMAP3: Overo: Clean up pin mux and GPIO configuration
5829 * Make Overo GPIO114 an input for touchscreen PENDOWN
5830 * Make Overo GPIO144-147 readable
5831 * Make Overo EHCI pinmux match beagle rev c setup
5832 * Adjust pinmux for SMSC911X network chip support
5833 * Remove unnecessary GPIO setup
5834 * Fix merge error in Makefile
5836 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
5837 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5839 commit 2579019b8248e5f166e60e37065766efc8a49dbc
5840 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5841 Date: Sun Feb 22 17:08:41 2009 +0100
5843 nmdk8815: fix onenand support
5845 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5847 commit 0176c03a2469676df5bf19cf93a1a6f582f6a120
5848 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5849 Date: Sun Feb 22 17:56:50 2009 +0100
5851 nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
5853 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5855 commit 9751a456f702ba2fcdfd1bdbc0138927ef007858
5856 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5857 Date: Sun Feb 22 17:49:43 2009 +0100
5859 davinci: fix implicit declaration of function 'davinci_errata_workarounds'
5861 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5863 commit 4f5728987f4f9f7845688482aa2b7f2127768165
5864 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5865 Date: Sun Feb 22 15:49:28 2009 +0100
5867 arm: add uart dcc support
5869 Serial driver via the EmbeddedICE macrocell's DCC channel using
5872 It does include a timeout to ensure that the system does not
5873 totally freeze when there is nothing connected to read.
5875 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5877 commit 0cd18fa982f9a8c1a90ce971379a7d6408976d48
5878 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5879 Date: Fri Nov 21 14:35:56 2008 -0500
5881 ARM DaVinci: Add common peripherals and modules enable functions.
5883 Taken all the duplicated code for enabling common modules and apply
5884 software workarounds from the board specific code into common
5885 functions. Also added comments explaining the workarounds
5886 (from TI errata documents) and replaced some numerical bit numbers
5887 with more meaningful defines.
5889 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5891 commit d3be1bcae7a8207e0a79ffd035d0e90f80378295
5892 Author: Alessandro Rubini <rubini@unipv.it>
5893 Date: Mon Feb 9 15:53:33 2009 +0100
5895 Enable Ethernet for Nomadik 8815 Evaluation Kit
5897 This trivially enables Ethernet support in the debug board
5898 by setting up the proper chip select.
5900 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
5901 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
5903 commit 0d8c6eab2481046e9446264bfe9402bb98ddf433
5904 Author: Alessandro Rubini <rubini@unipv.it>
5905 Date: Mon Feb 9 15:53:31 2009 +0100
5907 Nand driver for Nomadik SoC
5909 This driver implements the ECC algorithm described in
5910 the CPU data sheet and uses the OOB layout chosen in
5911 already-released development systems (shipped with a custom-made
5914 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
5915 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
5917 commit ef339cc2b68e4cbef3f9376a45315e1b974bbd8d
5918 Author: Alessandro Rubini <rubini@unipv.it>
5919 Date: Mon Feb 9 15:53:31 2009 +0100
5921 Added nomadik.h header
5923 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
5924 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
5926 commit 60ece6d8043d1dd80f5dd32c541213716d624b19
5927 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5928 Date: Wed Oct 29 20:05:18 2008 +0900
5930 r8a66597-hcd: fix cannot use external hub
5932 Fix the problem that cannot use external hub, because this driver
5933 did not control correctly a DEVADDx register.
5935 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5936 Signed-off-by: Remy Bohmer <linux@bohmer.net>
5938 commit e1ffaee728190e76a4596a3579d94e730143585f
5939 Author: Mike Frysinger <vapier@gentoo.org>
5940 Date: Thu Feb 19 01:20:27 2009 -0500
5942 Blackfin: disable syscontrol code for now
5944 Looks like the initcode updates fell out of order during my merges. The
5945 patch that really fixes up this code is part of power-on overhaul and so
5946 is too large for merging at this point. Instead, we can disable the code
5947 as no currently in-tree board depends on it. The next merge window will
5948 fix things up properly.
5950 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5952 commit 1b228d68f54832edd867ef98520f760f68192ab7
5953 Author: Mike Frysinger <vapier@gentoo.org>
5954 Date: Thu Feb 19 01:19:49 2009 -0500
5956 Blackfin: bf537-stamp: fix I2C board defines
5958 The previous merge for cleaning up the I2C driver incorrectly reverted the
5959 CFG_xxx rename for some of the I2C defines.
5961 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5962 Signed-off-by: Heiko Schocher <hs@denx.de>
5964 commit 09fee8e8677a6265e89144ccc163bf00e321769e
5965 Author: Wolfgang Denk <wd@denx.de>
5966 Date: Sun Feb 22 01:19:52 2009 +0100
5968 Coding Style cleanup; update CHANGELOG
5970 Signed-off-by: Wolfgang Denk <wd@denx.de>
5972 commit 1dcb50afbb63a439320a985380a0af2dca079d1e
5973 Author: Wolfgang Denk <wd@denx.de>
5974 Date: Sun Feb 22 01:17:47 2009 +0100
5976 Makefile: fix cleanup
5978 Commit e4943ec5 moved the ARM boards to a vendor directory but forgot
5979 to adapt the cleanup rules in the Makefile
5981 Signed-off-by: Wolfgang Denk <wd@denx.de>
5983 commit edff7bcc4d5540df8b416274652ff02e94c38b9e
5984 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
5985 Date: Fri Feb 20 13:01:56 2009 -0500
5987 Cleanup the comment for m68k linux boot argument passing.
5989 This patch clarifies the way m68k passes linux boot argument.
5990 The one gotcha here is that the assembly instruction that
5991 the compiler uses to jump to the kernel is 'jsr' which pushes the
5992 program counter for the instruction after the jsr into the stack pointer.
5994 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
5995 Signed-off-by: Wolfgang Denk <wd@denx.de>
5997 commit 4d41650eec959668280a612467bd95c7b8398513
5998 Author: Peter Griffin <pgriffin@mpc-data.co.uk>
5999 Date: Tue Feb 10 16:44:45 2009 +0000
6001 sh: Fix rsk7203 in tree build
6003 Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
6005 commit fca0cecff73db99d99ad094cca7980472b8a11b5
6006 Author: Minkyu Kang <mk7.kang@samsung.com>
6007 Date: Wed Feb 18 09:05:52 2009 +0900
6009 bootm: Reduce the unnecessary memmove
6011 Although load address and image start address are same address,
6012 bootm command always does memmove.
6013 That is unnecessary memmove and can be taken few milliseconds
6014 (about 500 msec to 1000 msec).
6015 If skip this memmove, we can reduce the boot time.
6017 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
6019 commit 670cbde8da83690fed1064c3358f54ae1d693ed2
6020 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
6021 Date: Sun Feb 15 22:29:15 2009 +0100
6023 fpga: Fix Spartan III FPGA booting
6025 This patch does some minor fixing of the Xilinx Spartan III
6028 - Fixed call order of post configuration callback and
6029 success message printing (result of copy-paste?)
6030 - remove obsolete comment
6031 - minor coding style cleanup
6033 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6035 commit 3818b677641038d27b2663fbd6771ad38c932f86
6036 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
6037 Date: Sun Feb 15 22:28:36 2009 +0100
6039 fpga: Fix Spartan II FPGA booting
6041 This patch does some minor fixing of the Xilinx Spartan II
6044 - Fixed call order of post configuration callback and
6045 success message printing (result of copy-paste?)
6046 - relocate post configuration callback only when it
6048 - remove obsolete comment
6049 - minor coding style cleanup
6051 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6053 commit b4746d8bf9f4ed6dc8a76c5d52db669604aff84b
6054 Author: Mike Frysinger <vapier@gentoo.org>
6055 Date: Wed Feb 11 20:26:52 2009 -0500
6057 drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)
6059 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6061 commit 6bcb4b806cef8a5dd08fac9a4a672b96d9ee804e
6062 Author: Derek Ou <dou@siconix.com>
6063 Date: Tue Feb 3 16:00:07 2009 -0700
6065 lcd_putc bug fix for tab.
6067 Signed-off-by: Derek Ou <dou@siconix.com>
6069 commit 35c9e14d8096e519fe76c953a43d52a09617345c
6070 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6071 Date: Mon Feb 2 09:46:21 2009 +0900
6073 MIPS: cpu/mips/Makefile: Add a missing START line
6075 In the commit 79b51ff8205f0354d5300570614c1d2db499679c ([MIPS] cpu/mips/
6076 Makefile: Split [CS]OBJS onto separate lines), I wrongly deleted a START
6077 line. This patch puts it back.
6079 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6081 commit 9a63b7f4f8f3c99cf017e0d3d4a152dfcd913b5a
6082 Author: Wolfgang Denk <wd@denx.de>
6083 Date: Sat Feb 21 21:51:21 2009 +0100
6085 Enable ext2 support for TQM8xxL/M based boards
6087 Signed-off-by: Wolfgang Denk <wd@denx.de>
6089 commit e3ba7f137c7c454ad626cd0bd2e84d73c7a8644f
6090 Author: Tom Rix <Tom.Rix@windriver.com>
6091 Date: Fri Feb 20 03:47:50 2009 +0100
6093 ARM:PXA Use new definitions in mmc.h
6095 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
6096 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6098 commit 682beeac34dc9ab18fab58b26973d2e29d113717
6099 Author: Andy Fleming <afleming@freescale.com>
6100 Date: Fri Feb 20 03:47:50 2009 +0100
6102 Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions
6104 These names are being taken over by the new MMC framework. Hopefuly
6105 the PXA can be easily ported, and these functions will go away entirely.
6107 Signed-off-by: Andy Fleming <afleming@freescale.com>
6108 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6110 commit b03d92e5584935886ff91d5aa0755dc8888b7187
6111 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6112 Date: Fri Feb 20 03:47:50 2009 +0100
6114 pxa: move mmc drivers to drivers/mmc
6116 introduce new macro CONFIG_PXA_MMC to activate it
6118 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6120 commit 9490f465642c80c054854689a2ef1a77d65cf1f3
6121 Author: Tom Rix <Tom.Rix@windriver.com>
6122 Date: Thu Feb 19 19:27:22 2009 -0600
6124 ARM:PXA Remove redefinition of mmc_cid and mmc_csd.
6126 These structures are defined in the common mmc.h
6128 This was compile checked on cerf250.
6130 commit 94a3312920b6f9b5da27309549fb73650718c10a
6131 Author: Micha Kalfon <smichak.uv@gmail.com>
6132 Date: Wed Feb 11 19:50:11 2009 +0200
6134 pxa: fixing get_timer to return time in miliseconds.
6136 Fixing the get_timer function to return time in miliseconds instead of
6137 ticks. Also fixed PXA boards to use the conventional value of 1000 for
6140 Signed-off-by: Micha Kalfon <smichak.uv@gmail.com>
6142 commit e5e88c3614b79b54719905f66aefb51f9494bc1f
6143 Author: Tom Rix <Tom.Rix@windriver.com>
6144 Date: Thu Feb 19 16:45:43 2009 -0600
6146 ARM:OMAP3 Change mmc_init to mmc_legacy_init
6148 omap3_mmc.c was changed to define mmc_legacy_init.
6149 Remove unused functions.
6151 Compile tested on all arm
6152 Runtime tested on Zoom1.
6154 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
6156 commit 9e80bb21629988063574f88ca0d28baadff4d963
6157 Author: Heiko Schocher <hs@denx.de>
6158 Date: Thu Feb 19 17:23:58 2009 +0100
6160 82xx, mgcoge: updates for 2009.03
6162 - activate CS4 for accessing the FPGA
6163 - activate Rx buf len > 1 on SMC
6165 - MTDPARTS_DEFAULT defined
6166 - update the size of the flashes in the DTS
6167 before booting Linux
6168 - MONITOR_LEN updated to 384k
6169 - added CONFIG_HOSTNAME
6170 - added CONFIG_ENV_BUFFER_PRINT
6171 - Environment size reduced to 16k
6173 Signed-off-by: Heiko Schocher <hs@denx.de>
6175 commit df909554e2401f307925e1bd45d576e4176d9de9
6176 Author: Heiko Schocher <hs@denx.de>
6177 Date: Thu Feb 19 17:24:01 2009 +0100
6179 8xx, mgsuvd: updates for 2009.03
6181 - activate Rx buf len > 1 on SMC
6183 - MTDPARTS_DEFAULT defined
6184 - update the size of the flash in the DTS
6185 before booting Linux
6186 - MONITOR_LEN updated to 384k
6187 - added CONFIG_HOSTNAME
6188 - added CONFIG_ENV_BUFFER_PRINT
6189 - Environment size reduced to 16k
6191 Signed-off-by: Heiko Schocher <hs@denx.de>
6193 commit 3511b4e208e12be85b532866f1c660aa2e021557
6194 Author: Dirk Behme <dirk.behme@googlemail.com>
6195 Date: Wed Feb 18 19:59:39 2009 +0100
6197 MMC: Don't use new framework code if not enabled
6199 Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
6202 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
6204 commit 32482be67775e00b4cbc49fba62347c1ecc6229c
6205 Author: Wolfgang Denk <wd@denx.de>
6206 Date: Thu Feb 19 13:53:29 2009 +0100
6208 TQM8xxL: make some room in low memory for future needs
6210 THe TQM8xxL use a ahnd-optimized linker script to efficiently use the
6211 small boot sectors in the flash. This patch makes some room in the
6212 first sector to prepare for a size increase of lib_generic/vsprintf.o
6215 Signed-off-by: Wolfgang Denk <wd@denx.de>
6217 commit c157cec3c3f6dfc194532b3a3ca87f85b642962a
6218 Author: Kim Phillips <kim.phillips@freescale.com>
6219 Date: Wed Feb 18 18:06:18 2009 -0600
6221 README: remove duplicate entry
6223 it's been around since the original commit (2ad6b513) that added two
6226 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6228 commit 1bba30efe1717bea13026e15c7c7d906419fac69
6229 Author: Wolfgang Denk <wd@denx.de>
6230 Date: Thu Feb 19 00:41:08 2009 +0100
6232 Coding style cleanup, update CHANGELOG
6234 Signed-off-by: Wolfgang Denk <wd@denx.de>
6236 commit 369d0aa9674b65c83f8553b9bcf9d207dc369223
6237 Author: Kim Phillips <kim.phillips@freescale.com>
6238 Date: Wed Feb 18 17:43:59 2009 -0600
6240 sata_sil3114: fix compiler warning
6242 judging from other printfs in the same file, it seems ata should be
6243 postpended with the interface number, not the address of the global
6244 port variable. Fixes this for current u-boot-mpc83xx tree:
6246 Configuring for MPC8349ITX board...
6247 sata_sil3114.c: In function 'sata_bus_softreset':
6248 sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
6249 sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
6251 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6253 commit f5675aa5ceeef30740970ab8ca0c8cbc324945cd
6254 Author: Ron Madrid <ron_madrid@sbcglobal.net>
6255 Date: Wed Feb 18 14:30:44 2009 -0800
6257 Create configuration option for restricted ns16550 functions
6259 This patch will create a configuration option for a minimum configuration for
6260 the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
6261 configuration option to the SIMPC8313.h config file in order to fix the NAND
6262 bootstrap build error. This option will exclude all functions with exception of
6263 NS16550_putc and NS16550_init. This will be used primarily to save space and
6264 remove unused code from builds in which space is limited.
6266 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
6268 commit 7b0bc0219db8981613259473cf19699ac259b4fb
6269 Author: Kim Phillips <kim.phillips@freescale.com>
6270 Date: Wed Feb 18 16:14:29 2009 -0600
6272 mkconfig: include board config.h before asm/config.h
6274 swapping the include order suppresses warnings for board configs
6275 that define their own CONFIG_MAX_MEM_MAPPED:
6277 In file included from /home/r1aaha/git/u-boot/include/config.h:5,
6278 from /home/r1aaha/git/u-boot/include/common.h:35,
6279 from simpc8313.c:26:
6280 /home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
6281 "CONFIG_MAX_MEM_MAPPED" redefined
6282 In file included from /home/r1aaha/git/u-boot/include/config.h:4,
6283 from /home/r1aaha/git/u-boot/include/common.h:35,
6284 from simpc8313.c:26:
6285 /home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
6286 the location of the previous definition
6288 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6290 commit b8845abdc0dcf20d0944e965153f5ae7a9c3077c
6291 Author: Wolfgang Denk <wd@denx.de>
6292 Date: Wed Feb 18 21:35:38 2009 +0100
6294 Fix build errors after making flash_get_info() non-static
6296 Fix for these build problems:
6297 error: static declaration of 'flash_get_info' follows non-static declaration
6299 Signed-off-by: Wolfgang Denk <wd@denx.de>
6301 commit b4996d6b2140e5da7f1c346f37a67b19907b307a
6302 Author: Stefan Roese <sr@denx.de>
6303 Date: Wed Feb 18 13:18:00 2009 +0100
6305 ppc4xx: PCIe: Change 16GB inbound memory to 4GB
6307 This patch fixes a problem recently seen on some 4xx platforms. For
6308 example on Kilauea PCIe slot #0.
6310 Signed-off-by: Stefan Roese <sr@denx.de>
6312 commit f50fe4bd613c6d35a2c34055f02e9501dd6a9ad5
6313 Author: Stefan Roese <sr@denx.de>
6314 Date: Wed Feb 18 14:05:37 2009 +0100
6316 ppc4xx: Some more PMC405 coding-style cleanup
6318 Signed-off-by: Stefan Roese <sr@denx.de>
6320 commit 2f6eb9170bf91b72ea51dcea2a8b9c11b0e20bc5
6321 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
6322 Date: Sun Feb 15 22:27:47 2009 +0100
6324 ppc4xx: Update PMC405 board support
6326 This patch prepares the good old PMC405 board support for
6327 upcoming PMC405V2 patches.
6329 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6330 Signed-off-by: Stefan Roese <sr@denx.de>
6332 commit c553b5f4a0c77fc76e1d25e71c8aaa47657e2d6f
6333 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
6334 Date: Sun Feb 15 22:26:54 2009 +0100
6336 ppc4xx: Cleanup PMC405 board support
6338 This patch fixes coding style for PMC405 board support.
6339 Also some unneeded features/code is removed.
6341 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6342 Signed-off-by: Stefan Roese <sr@denx.de>
6344 commit b4e85d0f37b5b924fbf834867ad6d0b31b86f667
6345 Author: Ilya Yanok <yanok@emcraft.com>
6346 Date: Thu Feb 5 04:08:20 2009 +0100
6348 qong: changes to Dave/DENX Qong configuration
6350 1. Changes to the default environment:
6351 - "bootcmd" defined as "run flash_self"
6352 - "saveenv" command removed from "update"
6353 - "uboot" changed to "u-boot" (also in "load")
6354 - "addmtd" variable defined (and added to all boot commands)
6355 2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
6356 3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
6357 4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
6358 with truncated "bootargs" environment variable.
6360 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
6362 commit 5f0320108870e5d62983d1d5c13a2a087dddf686
6363 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6364 Date: Sun Feb 1 17:07:52 2009 +0100
6366 common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible
6368 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6370 commit ec6f14994602276660f7264c6ab3b91ef1f7614d
6371 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6372 Date: Sun Feb 1 17:07:51 2009 +0100
6374 common/console: coding style cleanup
6376 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6378 commit daaf74f176b548dfd34a9990231f4189201d57ba
6379 Author: Mike Frysinger <vapier@gentoo.org>
6380 Date: Thu Jan 29 20:02:23 2009 -0500
6382 mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile
6384 Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
6385 into the Makefile so we avoid pointless compiling of the file.
6387 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6389 commit 7bd2722e890bc877a3c057d7ccddc80451c99939
6390 Author: Mike Frysinger <vapier@gentoo.org>
6391 Date: Thu Jan 29 20:02:07 2009 -0500
6393 disk: convert part_* files to COBJ-$(CONFIG_XXX) style
6395 Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
6396 avoid pointless compiles.
6398 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6400 commit f05fa9205e04986176dc7ab8b710bcb5fbe9f338
6401 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
6402 Date: Thu Jan 29 10:35:40 2009 +0200
6404 include/image.h: Ease grepping of image_* functions
6406 Because the functions have been defined using macros, grepping for
6407 their definitions is not possible. This patch adds the real function
6410 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
6411 Acked-by: Mike Frysinger <vapier@gentoo.org>
6413 commit bdab39d358e63aa47f400a8a76b8d5f283842df3
6414 Author: Mike Frysinger <vapier@gentoo.org>
6415 Date: Wed Jan 28 19:08:14 2009 -0500
6417 rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
6419 The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
6420 rather than a generic "env" command, or anything else related to the
6421 environment. So, let's make sure the define is named accordingly.
6423 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6425 commit 8b0592b89e0f9f81c9e150c81d96f8a43e4d6101
6426 Author: Valeriy Glushkov <gvv@lstec.com>
6427 Date: Fri Jan 23 20:02:17 2009 +0200
6429 disable imls command if no flash is defined
6431 Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined
6433 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
6435 commit 923aa48126259c13de95131203f1d28bfa5cb889
6436 Author: Rafal Jaworowski <raj@semihalf.com>
6437 Date: Fri Jan 23 13:27:18 2009 +0100
6439 API: Improve glue mid-layer of the API demo application.
6441 - Extend ub_dev_read() and ub_dev_recv() so they return the length actually
6442 read, which allows for better control and error handling (this introduces
6443 additional error code API_ESYSC returned by the glue mid-layer).
6445 - Clean up definitions naming and usage.
6447 - Other minor cosmetics.
6449 Note these changes do not touch the API proper, so the interface between
6450 U-Boot and standalone applications remains unchanged.
6452 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
6454 commit 44a94e596ba0f6d0951b165403c520bf55b1c56f
6455 Author: Rafal Jaworowski <raj@semihalf.com>
6456 Date: Fri Jan 23 13:27:17 2009 +0100
6458 API: Only output test data when reading was successful.
6460 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6462 commit 7fb6c4f9b06c5539043c8bfc6565710b8090841d
6463 Author: Rafal Jaworowski <raj@semihalf.com>
6464 Date: Fri Jan 23 13:27:16 2009 +0100
6466 API: Provide syscall entry point for the ARM architecture.
6468 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6469 Acked-by: Rafal Jaworowski <raj@semihalf.com>
6471 commit b84d7d8f1e1066f810866304a16a3583f88e7c98
6472 Author: Rafal Jaworowski <raj@semihalf.com>
6473 Date: Fri Jan 23 13:27:15 2009 +0100
6475 API: Use stack pointer as API signature search hint in the glue layer.
6477 De-hardcode range in RAM we search for the API signature. Instead use the stack
6478 pointer as a hint to narrow down the range in which the signature could reside
6479 (it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
6480 from stack area). Adjust PowerPC code in API demo to the new scheme.
6482 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6483 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
6485 commit 86b4bafdfaf669ede8fd99044abc7e27ea29b4f5
6486 Author: Wolfgang Denk <wd@denx.de>
6487 Date: Tue Feb 17 10:26:38 2009 +0100
6489 TQM8260: fix locations of kernel and ramdisk images in flash
6491 After introducing redundant environment the kernel images was
6492 overlapping with environment.
6494 Signed-off-by: Wolfgang Denk <wd@denx.de>
6496 commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb
6497 Author: Heiko Schocher <hs@denx.de>
6498 Date: Wed Feb 11 19:26:15 2009 +0100
6500 83xx: add missing TIMING_CFG1_CASLAT_* defines
6502 Signed-off-by: Heiko Schocher <hs@denx.de>
6503 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6505 commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5
6506 Author: Valeriy Glushkov <gvv@lstec.com>
6507 Date: Thu Feb 5 14:35:21 2009 +0200
6509 mpc8349itx: allow SATA boot from the onboard SIL1334
6511 This patch allows using of SATA devices connected
6512 to the onboard PCI SIL1334 SATA controller.
6514 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
6515 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6517 commit e1ac387f4645499746856adc1aeaa9787da2eca6
6518 Author: Andy Fleming <afleming@freescale.com>
6519 Date: Thu Oct 30 16:50:14 2008 -0500
6521 83xx: Add eSDHC support on 8379 EMDS board
6523 Signed-off-by: Andy Fleming <afleming@freescale.com>
6525 commit 80522dc8369a89938369fbcee572e662373bc9a3
6526 Author: Andy Fleming <afleming@freescale.com>
6527 Date: Thu Oct 30 16:51:33 2008 -0500
6529 85xx: Add eSDHC support for 8536 DS
6531 Signed-off-by: Andy Fleming <afleming@freescale.com>
6533 commit 50586ef24ed5caf6ce5591df76f355009da2cd79
6534 Author: Andy Fleming <afleming@freescale.com>
6535 Date: Thu Oct 30 16:47:16 2008 -0500
6537 Add support for the Freescale eSDHC found on 8379 and 8536 SoCs
6539 This uses the new MMC framework
6541 Some contributions by Dave Liu <daveliu@freescale.com>
6543 Signed-off-by: Andy Fleming <afleming@freescale.com>
6545 commit 272cc70b211e945e4413122aa73868f6ada732a5
6546 Author: Andy Fleming <afleming@freescale.com>
6547 Date: Thu Oct 30 16:41:01 2008 -0500
6551 Here's a new framework (based roughly off the linux one) for managing
6552 MMC controllers. It handles all of the standard SD/MMC transactions,
6553 leaving the host drivers to implement only what is necessary to
6554 deal with their specific hardware.
6556 This also hooks the infrastructure into the PowerPC board code
6557 (similar to how the ethernet infrastructure now hooks in)
6559 Some of this code was contributed by Dave Liu <daveliu@freescale.com>
6561 Signed-off-by: Andy Fleming <afleming@freescale.com>
6563 commit 1de97f9856f697380cc504126ab92561ed238803
6564 Author: Andy Fleming <afleming@freescale.com>
6565 Date: Thu Oct 30 16:31:39 2008 -0500
6567 Eliminated arch-specific mmc header requirement
6569 The current MMC infrastructure relies on the existence of an
6570 arch-specific header file. This isn't necessary, and a couple
6571 drivers were forced to implement dummy files to meet this requirement.
6572 Instead, we move the stuff in those header files into a more appropriate
6573 place, and eliminate the stubs and the #include of asm/arch/mmc.h
6575 Signed-off-by: Andy Fleming <afleming@freescale.com>
6577 commit abb5466ccf4ce50f412d459586f4f4b81cb73ac3
6578 Author: Andy Fleming <afleming@freescale.com>
6579 Date: Thu Oct 30 16:21:00 2008 -0500
6581 Convert mmc_init to mmc_legacy_init
6583 This is to get it out of the way of incoming MMC framework
6585 Signed-off-by: Andy Fleming <afleming@freescale.com>
6587 commit b2e2ed0233a5ef299361abec4fbdaefb63456eff
6588 Author: Andy Fleming <afleming@freescale.com>
6589 Date: Thu Oct 30 16:19:25 2008 -0500
6591 Eliminate support for using MMC as memory
6593 MMC cards are not memory, so we stop treating them that way.
6595 Signed-off-by: Andy Fleming <afleming@freescale.com>
6597 commit e1be0d25ecf494ae81245ca438738ba839d6329b
6598 Author: Poonam_Aggrwal-b10812 <b10812@freescale.com>
6599 Date: Sun Jan 4 08:46:38 2009 +0530
6601 32bit BUg fix for DDR2 on 8572
6603 This errata fix is required for 32 bit DDR2 controller on 8572.
6604 May also be required for P10XX20XX platforms
6606 Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
6608 commit e0c4fac79d4d74572ddd43f75e7189cecca8d0ad
6609 Author: Andy Fleming <afleming@freescale.com>
6610 Date: Mon Feb 16 09:40:20 2009 -0600
6612 TQM85xx: Fix a couple warnings in TQM8548 build
6614 The ecm variable in sdram.c was being declared for all 8548, but only
6615 used by specific 8548 boards, so we make that variable require those
6616 specific boards, too
6618 The nand code was using an index "i" into a table, and then re-using "i"
6619 to set addresses for each upm. However, then it relied on the old value
6620 of i still being there to enable things. Changed the second "i" to "j"
6622 Signed-off-by: Andy Fleming <afleming@freescale.com>
6624 commit cf07a5baece0ecfc5284cfda8a4e68eaf92782f8
6625 Author: Wolfgang Grandegger <wg@grandegger.com>
6626 Date: Wed Feb 11 18:38:26 2009 +0100
6628 MPC85xx: TQM8548: workaround for erratum DDR 19 and 20
6630 This patch adds the workaround for erratum DDR20 according to MPC8548
6631 Device Errata document, Rev. 1: "CKE signal may not function correctly
6632 after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
6633 processor version 2.1 and the work-around must be removed.
6635 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6637 commit 080408fdc71706adcb883d22125637c54f6010b1
6638 Author: Wolfgang Grandegger <wg@grandegger.com>
6639 Date: Wed Feb 11 18:38:25 2009 +0100
6641 MPC85xx: TQM8548: use cache for AG and BE variants
6643 This patch makes accesses to the system memory cachable by removing the
6644 caching-inhibited and guarded flags from the relevant TLB entries for
6645 the TQM8548_BE and TQM8548_AG modules. FYI, the Freescale MPC85* boards
6646 are configured similarly.
6648 This results in a big averall performace improvement. TFTP downloads,
6649 NAND Flash accesses, kernel boots, etc. are much faster.
6651 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6653 commit dc5f55d636d7bf21ba17758fac4b929ec4c059f2
6654 Author: Wolfgang Grandegger <wg@grandegger.com>
6655 Date: Wed Feb 11 18:38:24 2009 +0100
6657 MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration
6659 This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
6662 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
6663 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6665 commit 88b0e88d186479349e5a2b771e82775109e10fb4
6666 Author: Wolfgang Grandegger <wg@grandegger.com>
6667 Date: Wed Feb 11 18:38:23 2009 +0100
6669 MPC85xx: TQM8548: fix SDRAM timing for 533 MHz
6671 According to new TQM8548 timing specification:
6672 Refresh Recovery: 34 -> 53 clocks
6673 CKE pulse width: 1 -> 3 cycles
6674 Window for four activities: 13 -> 14 cycles
6676 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
6677 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6679 commit a865bcdac89278cac4dfc07dec8299403110499d
6680 Author: Wolfgang Grandegger <wg@grandegger.com>
6681 Date: Wed Feb 11 18:38:22 2009 +0100
6683 MPC85xx: TQM8548: add support for the TQM8548_AG module
6685 The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
6686 CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
6687 with "$ make TQM8548_AG_config".
6689 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6691 commit ad7ee5d43b0db94079d56521dabca25674f28747
6692 Author: Wolfgang Grandegger <wg@grandegger.com>
6693 Date: Wed Feb 11 18:38:21 2009 +0100
6695 MPC85xx: TQM8548: add support for the TQM8548_BE module
6697 The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
6698 interface. With NAND support, the image is significantly larger and
6699 TEXT_BASE is adjusted accordingly. U-Boot can be built for this
6700 module with "$ make TQM8548_BE_config".
6702 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6704 commit a318234878c346e673b2ef8dc4b14b338fe7fc2b
6705 Author: Wolfgang Grandegger <wg@grandegger.com>
6706 Date: Wed Feb 11 18:38:20 2009 +0100
6708 MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
6710 The TQM8548_AG module does not have the standard PCI/PCI-X interface
6711 connected but just the PCI Express interface . So far it was not
6712 possible to disable it without disabling the complete PCI interface
6713 (CONFIG_PCI) including PCI Express.
6715 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6717 commit 31ca9119c3186cec579b54d2a7a2b361b4d2b7bf
6718 Author: Wolfgang Grandegger <wg@grandegger.com>
6719 Date: Wed Feb 11 18:38:19 2009 +0100
6721 MPC85xx: TQM85xx: fix flash protection for boot loader
6723 As the reset vector is located at 0xfffffffc, all flash sectors from the
6724 beginning of the U-Boot binary to 0xffffffff must be protected. On the
6725 TQM8548-AG having small sectors at the end of the flash it happened that
6726 the last two sector were not protected and an "erase all" left an
6727 un-bootable system behind:
6729 Bank # 2: CFI conformant FLASH (32 x 16) Size: 32 MB in 270 Sectors
6730 AMD Standard command set, Manufacturer ID: 0xEC, Device ID: 0x257E
6731 Erase timeout: 8192 ms, write timeout: 1 ms
6733 FFFA0000 E RO FFFC0000 RO FFFE0000 RO FFFE4000 RO FFFE8000 RO
6734 FFFEC000 RO FFFF0000 RO FFFF4000 RO FFFF8000 E FFFFC000
6736 The same bug seems to be in drivers/mtd/cfi_flash.c:flash_init() and many
6739 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
6741 commit a1c8a719262151f97119e76166043ee3da3f97b2
6742 Author: Peter Tyser <ptyser@xes-inc.com>
6743 Date: Fri Feb 6 14:30:40 2009 -0600
6745 86xx: Update CPU info output on bootup
6747 - Update style of 86xx CPU information on boot to more closely
6749 - Fix detection of 8641/8641D
6750 - Use strmhz() to display frequencies
6751 - Display L1 information
6752 - Display L2 cache size
6753 - Fixed CPU/SVR version output
6758 Core: E600 Core 0, Version: 0.2, (0x80040202)
6759 System: Unknown, Version: 2.1, (0x80900121)
6760 Clocks: CPU:1066 MHz, MPX: 533 MHz, DDR: 266 MHz, LBC: 133 MHz
6762 Board: X-ES XPedite5170 3U VPX SBC
6765 CPU: 8641D, Version: 2.1, (0x80900121)
6766 Core: E600 Core 0, Version: 2.2, (0x80040202)
6767 Clock Configuration:
6768 CPU:1066.667 MHz, MPX:533.333 MHz
6769 DDR:266.667 MHz (533.333 MT/s data rate), LBC:133.333 MHz
6770 L1: D-cache 32 KB enabled
6771 I-cache 32 KB enabled
6773 Board: X-ES XPedite5170 3U VPX SBC
6775 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6777 commit 22c00f8d7d454d77e759df58415d2d3f3d7e154c
6778 Author: Peter Tyser <ptyser@xes-inc.com>
6779 Date: Thu Feb 5 11:25:24 2009 -0600
6781 86xx: Update Global Utilities structure
6783 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6785 commit 4ef630df773e45806d701bf5d25c328778bb4cde
6786 Author: Peter Tyser <ptyser@xes-inc.com>
6787 Date: Thu Feb 5 11:25:25 2009 -0600
6791 Update the 86xx reset sequence to try executing a board-specific reset
6792 function. If the board-specific reset is not implemented or does not
6793 succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard
6794 reset procedure than the previous method and allows all board
6795 peripherals to be reset if needed.
6797 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6799 commit edf0e2524a8c6a3e91c009c496a0aa0ae89cd8ab
6800 Author: Kumar Gala <galak@kernel.crashing.org>
6801 Date: Tue Feb 10 23:53:40 2009 -0600
6803 fsl-ddr: Allow system to boot if we have more than 4G of memory
6805 Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report
6806 an error and hang. Instead of doing that since DDR is mapped in the
6807 lowest priority LAWs we setup the DDR controller and the max amount
6808 of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED)
6810 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6811 Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
6813 commit 8d949aff38cfb4388cbd73876e77bcd06d601f20
6814 Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
6815 Date: Wed Jan 21 17:17:33 2009 -0600
6817 mpc85xx: Add support for the P2020
6819 Added various p2020 processor specific details:
6820 * SVR for p2020, p2020E
6821 * immap updates for LAWs and DDR on p2020
6822 * LAW defines related to p2020
6824 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
6825 Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
6826 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6828 commit cb69e4de8702e108324e1c40363f30ef6f2e2918
6829 Author: Kumar Gala <galak@kernel.crashing.org>
6830 Date: Tue Feb 10 17:36:15 2009 -0600
6832 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS
6834 Added some info that is printed out when we boot to distiquish if we
6835 built MPC8572DS_config vs MPC8572DS_36BIT_config since they have
6836 different address maps.
6838 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6840 commit feede8b07013b33fca8dd2a916b3ac86bf4d4c0a
6841 Author: Andy Fleming <afleming@freescale.com>
6842 Date: Fri Dec 5 20:10:22 2008 -0600
6844 Fixup SGMII PHY ids in the device tree
6846 The device tree's PHY addresses need to be fixed up if we're using the
6849 The 8572, 8536, and 8544 DS boards were modified to call this function.
6851 Code idea taken from Liu Yu <yu.liu@freescale.com>
6853 Signed-off-by: Andy Fleming <afleming@freescale.com>
6855 commit 5dc0cf68f8f101042997d75188081d8526d705ea
6856 Author: Andy Fleming <afleming@freescale.com>
6857 Date: Wed Feb 11 15:10:31 2009 -0600
6859 Make some minor whitespace changes to eliminate line-wrapping
6861 Signed-off-by: Andy Fleming <afleming@freescale.com>
6863 commit 9e56986a2b74d197f51eca70fad7b836b1900c4d
6864 Author: Andy Fleming <afleming@freescale.com>
6865 Date: Wed Feb 11 15:07:24 2009 -0600
6867 Add eth_get_dev_by_index
6869 This allows code to iterate through the ethernet devices
6871 Signed-off-by: Andy Fleming <afleming@freescale.com>
6873 commit b67305120aaf268a6140125346678166d14f1f47
6874 Author: Kumar Gala <galak@kernel.crashing.org>
6875 Date: Mon Feb 9 22:03:04 2009 -0600
6877 85xx: Fix bug in device tree setup in 36-bit physical confg
6879 In the 36-bit physical config for MPC8572DS when need the start address
6880 of memory and it size to be kept in phys_*_t instead of a ulong since
6881 we support >4G of memory in the config and ulong cant represent that.
6882 Otherwise we end up seeing the memory node in the device tree reporting
6883 back we have memory starting @ 0 and of size 0.
6885 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6887 commit ad97dce18445ff05bf326094e691a01aa95aa8dc
6888 Author: Kumar Gala <galak@kernel.crashing.org>
6889 Date: Mon Feb 9 22:03:05 2009 -0600
6891 85xx: Fix address map for 36-bit config of MPC8572DS
6893 When we introduced the 36-bit config of the MPC8572DS board we had the
6894 wrong PCI MEM bus address map. Additionally, the change to the address
6895 map exposes a small issue in our dummy read on the ULI bus. We need
6896 to use the new mapping functions to handle that read properly in the
6899 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6901 commit f8523cb0815b2d3d2d780b7d49ca614105555f58
6902 Author: Kumar Gala <galak@kernel.crashing.org>
6903 Date: Fri Feb 6 09:56:35 2009 -0600
6905 85xx: Fix how we map DDR memory
6907 Previously we only allowed power-of-two memory sizes and didnt
6908 handle >2G of memory. Now we will map up to CONFIG_MAX_MEM_MAPPED
6909 and should properly handle any size that we can make in the TLBs
6910 we have available to us
6912 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6914 commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
6915 Author: Kumar Gala <galak@kernel.crashing.org>
6916 Date: Fri Feb 6 09:56:34 2009 -0600
6918 fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller
6920 If we only have one controller we can completely ignore how
6921 memctl_intlv_ctl is set. Otherwise other levels of code get confused
6922 and think we have twice as much memory.
6924 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6926 commit b29dee3c906e9daaf6baf7772d2e15e26b8636b8
6927 Author: Kumar Gala <galak@kernel.crashing.org>
6928 Date: Wed Feb 4 09:35:57 2009 -0600
6930 85xx: Format cpu freq printing to handle 8 cores
6932 Only print 4 cpu freq per line. This way when we have 8 cores its a
6935 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6937 commit 9704f9caf53f5cae547d8c5e1ae94aa4e57b160f
6938 Author: Abraham, Thomas <t-abraham@ti.com>
6939 Date: Tue Oct 28 16:51:31 2008 +0530
6941 USB: Remove LUN number from CDB
6943 The LUN number is not part of the Command Descriptor Block (CDB) for scsi inquiry, request sense, test unit ready, read capacity and read10 commands. This patch removes the LUN number information from the CDB.
6945 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
6946 Signed-off-by: Remy Bohmer <linux@bohmer.net>
6948 commit f3c0de636252f3a18654c8f9c6370a9574a7e755
6949 Author: Atin Malaviya <atin.malaviya@gmail.com>
6950 Date: Tue Feb 3 15:17:10 2009 -0500
6952 Added usbtty_configured() check. Fixed attribute(packed) warnings.
6954 V3: Fixed line-wrap problem due to user error in mail!
6956 Added usb_configured() checks in usbtty_puts() and usbtty_putc() to get around a hang
6957 when usb is not connected and the user has set up multi-io (setenv stdout serial,usbtty etc).
6958 Got rid of redundant __attribute__((packed)) directives that were causing warnings from gcc.
6960 Signed-off-by: Atin Malaviya <atin.malaviya@gmail.com>
6961 Signed-off-by: Remy Bohmer <linux@bohmer.net>
6963 commit e7de18afe8ecf96a51ef981d06066eeb6b1254e7
6964 Author: Guennadi Liakhovetski <lg@denx.de>
6965 Date: Fri Feb 13 09:23:36 2009 +0100
6967 i.MX31: Start the I2C clock on driver initialisation
6969 i.MX31 powers on with most clocks running, so, after a power on this explicit
6970 clock start up is not required. However, as Linux boots it disables most clocks
6971 to save power. This includes the I2C clock. If we then soft reboot from Linux
6972 the I2C clock stays off. This breaks the phycore, which has its environment in
6973 I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver
6974 initialisation routine.
6976 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6977 Ack-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6979 commit 15208ac9eae1c340c4bc11f70cbf5c9da78a57ba
6980 Author: Mike Frysinger <vapier@gentoo.org>
6981 Date: Wed Feb 11 20:36:14 2009 -0500
6983 i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts
6985 The Blackfin i2c driver has been rewritten thus the special ifdefs in the
6986 common code are no longer needed.
6988 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6990 commit c2d9befa0b4695b89476fb5d259742c09afe243f
6991 Author: Heiko Schocher <hs@denx.de>
6992 Date: Thu Feb 12 08:08:54 2009 +0100
6994 82xx, mgcoge: fix compile error
6996 With actual u-boot compiling the mgcoge port fails, because
6997 since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is
6998 necessary to define CONFIG_NET_MULTI.
7000 Seems to me the mgcoge port is the only actual existing 8260
7001 port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed
7004 Signed-off-by: Heiko Schocher <hs@denx.de>
7006 commit 9cacf4fc4035eabe9d9ae2a9a188c51a8027c91e
7007 Author: Dirk Eibach <eibach@gdsys.de>
7008 Date: Mon Feb 9 08:18:34 2009 +0100
7010 ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE
7012 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
7013 Signed-off-by: Stefan Roese <sr@denx.de>
7015 commit 7369f0e384e2a831be13a7773a58242c9173fa9c
7016 Author: Carolyn Smith <carolyn.smith@tektronix.com>
7017 Date: Thu Feb 12 06:13:44 2009 +0100
7019 ppc4xx: Fix initialization of the SDRAM_CODT register
7021 This fixes the initialization of the SDRAM_CODT register in the ppc4xx DDR2
7022 initialization code. It also removes use of the SDRAM_CODT_FEEDBACK_RCV_SINGLE_END
7023 and SDRAM_CODT_FEEDBACK_DRV_SINGLE_END #define's since they are reserved bits.
7025 Signed-off-by: Carolyn Smith <carolyn.smith@tektronix.com>
7026 Signed-off-by: Stefan Roese <sr@denx.de>
7028 commit cef0efaf2fa55d1f25066cfb02bd984c27f9ca31
7029 Author: Stefan Roese <sr@denx.de>
7030 Date: Wed Feb 11 09:29:33 2009 +0100
7032 ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards
7034 Some AMCC eval boards do have a board_eth_init() function calling
7035 pci_eth_init(). These boards need to call cpu_eth_init() explicitly now
7036 with the new eth_init rework.
7038 Signed-off-by: Stefan Roese <sr@denx.de>
7040 commit c645012aefebb301e6907d148c6c8efacac049d4
7041 Author: Adam Graham <agraham@amcc.com>
7042 Date: Mon Feb 9 13:18:12 2009 -0800
7044 ppc4xx: Autocalibration can set RDCC to over aggressive value.
7046 The criteria of the AMCC SDRAM Controller DDR autocalibration
7047 U-Boot code is to pick the largest passing write/read/compare
7048 window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
7051 On some Kilauea boards the DDR autocalibration algorithm can
7052 find a large passing write/read/compare window with a small
7053 SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
7056 This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
7057 "T1 Sample" proves to be to aggressive when later on U-Boot
7058 relocates into DDR memory and executes.
7060 The memory traces on the Kilauea board are short so on some
7061 Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
7062 value of "T1 Sample" shows up as a potentially valid value for
7063 the DDR autocalibratiion algorithm.
7065 The fix is to define a weak default function which provides
7066 the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
7067 to accept for DDR autocalibration. The default will be the
7068 "T2 Sample" value. A board developer who has a well defined
7069 board and chooses to be more aggressive can always provide
7070 their own board specific string function with the more
7071 aggressive "T1 Sample" value or stick with the default
7072 minimum SDRAM_RDCC.[RDSS] value of "T2".
7074 Also put in a autocalibration loop fix for case where current
7075 write/read/compare passing window size is the same as a prior
7076 window size, then in this case choose the write/read/compare
7077 result that has the associated smallest RDCC T-Sample value.
7079 Signed-off-by: Adam Graham <agraham@amcc.com>
7080 Signed-off-by: Stefan Roese <sr@denx.de>
7082 commit 2ede879fcb67470524847bb4fc8972651bb46184
7083 Author: Stefan Roese <sr@denx.de>
7084 Date: Wed Feb 11 09:37:12 2009 +0100
7086 ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h
7088 CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
7089 included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.
7091 It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
7094 Signed-off-by: Stefan Roese <sr@denx.de>
7096 commit f15c6515fc23f83c51f3de272ca23d86b80e81b1
7097 Author: Wolfgang Denk <wd@denx.de>
7098 Date: Thu Feb 12 00:08:39 2009 +0100
7100 Coding style cleanup; update CHANGELOG
7102 Signed-off-by: Wolfgang Denk <wd@denx.de>
7104 commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
7105 Author: Peter Tyser <ptyser@xes-inc.com>
7106 Date: Fri Jan 30 16:36:40 2009 -0600
7108 Add feature-removal-schedule.txt
7110 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7112 commit 255d28e1642e8fc32a6753226be1a96b481ce111
7113 Author: Heiko Schocher <hs@denx.de>
7114 Date: Tue Feb 10 09:32:38 2009 +0100
7116 8xx serial, smc: Coding-Style cleanup serial SMC driver
7118 Signed-off-by: Heiko Schocher <hs@denx.de>
7120 commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
7121 Author: Heiko Schocher <hs@denx.de>
7122 Date: Tue Feb 10 09:31:47 2009 +0100
7124 8xx serial, smc: add configurable SMC Rx buffer len
7126 This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
7127 With this option it is possible to allow the receive
7128 buffer for the SMC on 8xx to be greater then 1. In case
7129 CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
7132 When defining CONFIG_SYS_SMC_RXBUFLEN also
7133 CONFIG_SYS_MAXIDLE must be defined to setup the maximum
7134 idle timeout for the SMC.
7136 Signed-off-by: Heiko Schocher <hs@denx.de>
7138 commit e915f8bb73d74178bc21d3a457959883b1afd1c0
7139 Author: Mike Frysinger <vapier@gentoo.org>
7140 Date: Thu Feb 5 21:04:36 2009 -0500
7142 common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile
7144 Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
7145 the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb
7146 code in the process.
7148 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7150 commit ab76e9848a1f4db64d14233741d739a3b3360c93
7151 Author: Mike Frysinger <vapier@gentoo.org>
7152 Date: Thu Feb 5 21:04:50 2009 -0500
7154 bzip2: move ifdef handling to Makefile COBJS-$(...)
7156 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7158 commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
7159 Author: Jerry Van Baren <gvb.uboot@gmail.com>
7160 Date: Thu Feb 5 22:18:02 2009 -0500
7162 Fix whitespace damage: double space changed to a tab
7164 At some point an intentional double space at the end of the sentence
7165 got changed into a tab in the GPL header line:
7166 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
7168 This patch fixes the damage.
7170 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7172 commit 4f975678de995b55749d5e84590c268972a7c835
7173 Author: Heiko Schocher <hs@denx.de>
7174 Date: Tue Feb 10 09:53:29 2009 +0100
7176 cfi: make flash_get_info() non static
7178 If on your board is more than one flash, you must know
7179 the size of every single flash, for example, for updating
7180 the DTS before booting Linux. So make this function
7181 flash_get_info() extern, and you can have all info
7184 Signed-off-by: Heiko Schocher <hs@denx.de>
7185 Signed-off-by: Stefan Roese <sr@denx.de>
7187 commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
7188 Author: Ben Warren <biggerbadderben@gmail.com>
7189 Date: Thu Feb 5 23:58:25 2009 -0800
7191 net: removed board-specific CONFIGs from MPC5xxx FEC driver
7193 Added new CONFIG options for the three type of MAC-PHY interconnect and
7194 applied them all relevant board config files
7196 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7198 commit 638ed3e296e70fab286d157b7adedaaa4a09a474
7199 Author: Mike Frysinger <vapier@gentoo.org>
7200 Date: Thu Feb 5 21:04:47 2009 -0500
7202 net/sntp.c: move ifdef into Makefile COBJS-$(...)
7204 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7205 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7207 commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
7208 Author: Andy Fleming <afleming@freescale.com>
7209 Date: Tue Feb 3 18:26:41 2009 -0600
7211 tsec: Fix a bug in soft-resetting
7213 SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30
7214 clock cycles, so it's been mostly working. But we had no guarantee, and at
7215 slower bitrates, it's just over a microsecond (over 1000 clock cycles). This
7216 enforces a 2 microsecond gap between assertion and deassertion.
7218 Signed-off-by: Andy Fleming <afleming@freescale.com>
7219 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7221 commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
7222 Author: Simon Munton <simon@nidoran.m5data.com>
7223 Date: Mon Feb 2 09:44:08 2009 +0000
7225 Fix 100Mbs ethernet operation on sh7763 based boards
7227 100Mbs ethernet does not work on sh7763 chips due to the wrong value being
7228 used in the GECMR register. Following diff fixes the problem
7230 Signed-off-by: Simon Munton <simon@nidoran.m5data.com>
7231 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7233 commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
7234 Author: ksi@koi8.net <ksi@koi8.net>
7235 Date: Fri Feb 6 16:27:55 2009 -0800
7237 Fix MPC8260 with ethernet on SCC
7239 This fixes MPC8260 compilation with ethernet on SCC. Probably was a
7240 typo or something...
7242 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
7243 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7245 commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
7246 Author: Heiko Schocher <hs@denx.de>
7247 Date: Fri Jan 30 12:56:15 2009 +0100
7249 82xx serial, smc: Coding-Style cleanup serial SMC driver
7251 Signed-off-by: Heiko Schocher <hs@denx.de>
7253 commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
7254 Author: Heiko Schocher <hs@denx.de>
7255 Date: Fri Jan 30 12:55:38 2009 +0100
7257 82xx serial, smc: add configurable SMC Rx buffer len
7259 This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
7260 With this option it is possible to allow the receive
7261 buffer for the SMC on 82xx to be greater then 1. In case
7262 CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
7265 When defining CONFIG_SYS_SMC_RXBUFLEN also
7266 CONFIG_SYS_MAXIDLE must be defined to setup the maximum
7267 idle timeout for the SMC.
7269 Signed-off-by: Heiko Schocher <hs@denx.de>
7271 commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
7272 Author: Kumar Gala <galak@kernel.crashing.org>
7273 Date: Fri Feb 6 08:08:06 2009 -0600
7275 ppc: Fix roll over bug in flush_cache()
7277 If we call flush_cache(0xfffff000, 0x1000) it would never
7278 terminate the loop since end = 0xffffffff and we'd roll over
7279 our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)
7281 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7283 commit 87c9063963561d3d01064be34d0c30855a56587b
7284 Author: Kumar Gala <galak@kernel.crashing.org>
7285 Date: Thu Feb 5 20:40:58 2009 -0600
7287 ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
7289 Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
7290 between the two current users (lib_ppc/board.c, 44x SPD DDR2).
7292 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7293 Acked-by: Stefan Roese <sr@denx.de>
7295 commit 47d41cc3a11a03c6d56146d056145df73f47eb50
7296 Author: Kumar Gala <galak@kernel.crashing.org>
7297 Date: Thu Feb 5 20:40:57 2009 -0600
7299 Add an architecture specific config.h for common defines
7301 We have common defines that we duplicate in various ways. Having an
7302 arch specific config.h gives us a common location for those defines.
7304 Eventually we should be able to replace this when we have proper
7307 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7309 commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
7310 Author: Becky Bruce <beckyb@kernel.crashing.org>
7311 Date: Tue Feb 3 18:10:56 2009 -0600
7313 mpc8641hpcn: Change PCI MEM pci bus address
7315 Now that the rest of u-boot can support it, change the PCI bus
7316 address of the PCI MEM regions from 0x80000000 to 0xc0000000,
7317 and use the same bus address for both PCI1 and PCI2. This will
7318 maximize the amount of PCI address space left over to map RAM
7319 on systems with large amounts of memory.
7321 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7323 commit 1785dbeed43599eed1d8875673c96912cd770141
7324 Author: Becky Bruce <beckyb@kernel.crashing.org>
7325 Date: Tue Feb 3 18:10:55 2009 -0600
7327 drivers/block/ahci: Fix pci mapping bug
7329 The code assumes that the pci bus address and the virtual
7330 address used to access a region are the same, but they might
7331 not be. Fix this assumption.
7333 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7335 commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
7336 Author: Becky Bruce <beckyb@kernel.crashing.org>
7337 Date: Tue Feb 3 18:10:54 2009 -0600
7339 MPC8641HPCN: Enable CONFIG_ADDR_MAP
7341 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7343 commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
7344 Author: Becky Bruce <beckyb@kernel.crashing.org>
7345 Date: Tue Feb 3 18:10:53 2009 -0600
7347 mpc8641hpcn: Clean up PCI mapping concepts
7349 Clean up PCI mapping concepts in the 8641 config - rename _BASE
7350 to _BUS, as it's actually a PCI bus address, separate virtual
7351 and physical addresses into _VIRT and _PHYS, and use each
7354 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7356 commit c9315e6b4f244981de0b2eaaa29a7838a165b494
7357 Author: Becky Bruce <beckyb@kernel.crashing.org>
7358 Date: Tue Feb 3 18:10:52 2009 -0600
7360 mpc86xx: Add support to populate addr map based on BATs
7362 If CONFIG_ADDR_MAP is enabled, update the address map
7363 whenever we write a bat.
7365 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7367 commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
7368 Author: Becky Bruce <beckyb@kernel.crashing.org>
7369 Date: Tue Feb 3 18:10:51 2009 -0600
7371 powerpc: Move duplicated BAT defines to mmu.h
7373 The BAT fields are architected; there's no need for these to be in
7374 cpu-specific files. Drop the duplication and move these to
7375 include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only
7376 used by the alaska board, and switch to using the BATU_BL_xxx defines
7377 used by all the other boards. The BL_ defines previously in use
7378 had to be shifted into the proper position for use, which was inefficient.
7380 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7382 commit 6e61fae4d360a1380b63e7d007b31477e366bcce
7383 Author: Becky Bruce <beckyb@kernel.crashing.org>
7384 Date: Tue Feb 3 18:10:50 2009 -0600
7386 drivers/pci: Create pci_map_bar function
7388 It is no longer always true that the pci bus address can be
7389 used as the virtual address for pci accesses. pci_map_bar()
7390 is created to return the virtual address for a pci region.
7392 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7394 commit 2ecca3401775b125c3b9ff65766befb23989414b
7395 Author: Becky Bruce <beckyb@kernel.crashing.org>
7396 Date: Tue Feb 3 18:10:49 2009 -0600
7398 mpc8641hpcn: Set up outbound pci windows before inbound
7400 Because the inbound pci windows are mapped generously, set up
7401 the more specific outbound windows first. This way, when we
7402 search the pci regions for something, we will hit on the more
7403 specific region. This can actually be a problem on systems
7404 with large amounts of RAM.
7406 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7408 commit b81b773ead0687114dc8a800f99ea6e504447739
7409 Author: Becky Bruce <beckyb@kernel.crashing.org>
7410 Date: Mon Feb 2 16:34:52 2009 -0600
7412 mpc8641hpcn: Use physical address in flash banks defintion
7414 If the VA and PA of the flash aren't the same, the banks list
7415 should be initialized to hold the physical address. Correct this.
7417 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7419 commit 0d19f6c8cbe71b9e6d8c6bd6742ed2551e918870
7420 Author: Ilya Yanok <yanok@emcraft.com>
7421 Date: Tue Feb 10 00:22:31 2009 +0100
7423 qong: support for Dave/DENX QongEVB-LITE board
7425 This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.
7427 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7428 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7430 commit 62cbc408f52fc9a5eb849e0b882c504780c9d183
7431 Author: Ilya Yanok <yanok@emcraft.com>
7432 Date: Mon Feb 9 18:45:28 2009 +0100
7434 dnet: driver for Dave DNET ethernet controller
7436 Driver for Dave DNET ethernet controller (used on Dave/DENX
7437 QongEVB-LITE board).
7439 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7440 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7442 commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
7443 Author: Kumar Gala <galak@kernel.crashing.org>
7444 Date: Fri Feb 6 09:49:32 2009 -0600
7446 pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching
7448 When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
7449 we should give preference to memory regions that aren't system memory.
7451 Its possible that we have over mapped system memory in the regions and
7452 we want to avoid depending on the order of the regions.
7454 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7456 commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
7457 Author: Kumar Gala <galak@kernel.crashing.org>
7458 Date: Fri Feb 6 09:49:31 2009 -0600
7460 pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
7462 The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
7463 can be confusing when reading the code.
7465 Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
7466 for system memory mapping purposes.
7468 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7470 commit 54dc517328709c204a9cbf7a253d9f8e6c4b26ec
7471 Author: Ilya Yanok <yanok@emcraft.com>
7472 Date: Sun Feb 8 00:59:43 2009 +0300
7474 mx31: add GPIO registers definitions
7476 Added definitions for i.MX31 processor GPIO registers.
7478 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
7480 commit 8da601280a8acbc3385784780ed35130e53812f1
7481 Author: Peter Tyser <ptyser@xes-inc.com>
7482 Date: Wed Feb 4 13:47:22 2009 -0600
7484 NAND: Add timeout for reset command
7486 Without the timeout present an infinite loop can occur if the
7487 NAND device is broken or not present.
7489 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7490 Signed-off-by: Scott Wood <scottwood@freescale.com>
7492 commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
7493 Author: Peter Tyser <ptyser@xes-inc.com>
7494 Date: Wed Feb 4 13:39:40 2009 -0600
7496 NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
7498 Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
7499 for disabling the "No NAND device found!!!" warning when
7500 CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support
7501 for silencing the warning.
7503 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
7504 Signed-off-by: Scott Wood <scottwood@freescale.com>
7506 commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
7507 Author: Valeriy Glushkov <gvv@lstec.com>
7508 Date: Mon Jan 19 16:32:59 2009 +0200
7510 NAND: Fixed invalid pointers to static relocated chip names
7514 You are right, the patch was ugly.
7515 The new one seems to be better.
7517 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
7518 Signed-off-by: Scott Wood <scottwood@freescale.com>
7520 commit e7deec1bf6fa3b3a21cd8d14fe2a909a42efc9d8
7521 Author: Nishanth Menon <nm@ti.com>
7522 Date: Mon Feb 2 18:20:12 2009 -0600
7524 ARM:OMAP3:Zoom1: Add nand unlock option
7526 Enable NAND_UNLOCK option for unlocking nand for
7527 erase/write operations
7529 Signed-off-by: Nishanth Menon <nm@ti.com>
7531 commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
7532 Author: derek@siconix.com <derek@siconix.com>
7533 Date: Mon Jan 26 14:08:17 2009 -0700
7535 env_nand: fix env memory release
7537 This fixes a bug that tmp environment memory not being released.
7539 Signed-off-by: Derek Ou <dou@siconix.com>
7540 Signed-off-by: Scott Wood <scottwood@freescale.com>
7542 commit 05fd88776419df59e7f37bac063a209409dd801d
7543 Author: Guennadi Liakhovetski <lg@denx.de>
7544 Date: Fri Feb 6 10:37:45 2009 +0100
7546 ARM: remove unused variable
7548 The "size" variable in start_armboot() in lib_arm/board.c is only really
7549 used in "#ifndef CONFIG_SYS_NO_FLASH" case, and even there it can be
7550 eliminated (thanks to Jean-Christophe PLAGNIOL-VILLARD for a suggestion.)
7552 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7554 commit 6989e4f546d960a407dd5425f800dff9751c8132
7555 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7556 Date: Thu Feb 5 09:33:50 2009 -0500
7558 Coldfire: M527x: Add missing GPIO register address defines
7560 Add missing GPIO registers address definition for Coldfire M5271.
7562 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7564 commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
7565 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7566 Date: Fri Jan 23 14:42:58 2009 -0500
7568 Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
7570 Modified mii_init to support boards with PHYs that are not set to
7571 autonegotiate, but still want to use u-boot's mii commands to probe
7572 the smi bus. Such PHYs will not set the Autonegotiate-done bit.
7574 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7576 commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
7577 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7578 Date: Fri Jan 23 11:44:30 2009 -0500
7580 Coldfire: Applied baudrate formula of serial_init to serial_setbrg
7582 Applied the patch for baudrate divider value truncation for
7583 serial_init to serial_setbrg as well.
7585 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7587 commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
7588 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7589 Date: Fri Jan 23 14:07:05 2009 -0500
7591 Coldfire: M5271EVB: Board header update (dependencies)
7593 Cleanup for M5271EVB:
7594 Added clarification on the use of CONFIG_SYS_CLOCK.
7595 Modified to use u-boot's HUSH parser.
7596 Cleanup on environment settings.
7597 Removed compiler warning by defining CONFIG_SYS_CS0_*
7600 Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
7601 This depends on a patch to include/asm-m68k/m5271.h
7602 that defines the multiplier and divider ratios.
7604 Removed the definition of CONFIG_SYS_FECI2C.
7605 This depends on a patch that removes the use of it in
7606 cpu/mcf52x2/cpu_init.c
7608 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7610 commit e0db344fabfeb4f9649846f94838f51172f6a1f6
7611 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7612 Date: Thu Jan 29 14:36:06 2009 -0500
7614 Coldfire: M5271: Allow board header file to specify clock multiplier
7616 M5271 dynamic clock multiplier. It is currently fixed at 100MHz.
7618 Allow the board header file to set their own multiplier and divider.
7619 Added the #define for the multiplier and divider to the cpu header file.
7621 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7623 commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
7624 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7625 Date: Fri Jan 23 10:47:13 2009 -0500
7627 Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
7629 Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
7630 Use read-modify-write to activate the FEC pins without disabling I2C.
7632 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7634 commit ee73cc59ab904976af3c33b454fc84f78618b2d1
7635 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7636 Date: Fri Jan 23 09:45:34 2009 -0500
7638 Coldfire: cmd_bdinfo cleanup
7640 CONFIG_M68K bdinfo cleanup:
7642 Fixed compiler warning about baudrate printing.
7643 format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
7645 Added printing of "cpufreq"
7647 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7649 commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
7650 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7651 Date: Fri Jan 23 09:27:00 2009 -0500
7653 Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
7655 Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
7656 was causing the bus clock (not CPU clock) to be declared twice as
7657 fast as it actually is. This causes UARTS to operate at half the
7660 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
7662 commit 59d1bda7f92c8a28c3aba94e48063749d425949f
7663 Author: Dirk Eibach <eibach@gdsys.de>
7664 Date: Tue Feb 3 15:15:21 2009 +0100
7666 ppc4xx: Make PCIE support selectable
7668 On some platforms PCIE support is not required, but would be included
7669 because the cpu supports it. To reduce fooprint it is now configurable
7670 via CONFIG_PCI_DISABLE_PCIE.
7672 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
7673 Signed-off-by: Stefan Roese <sr@denx.de>
7675 commit b129eff5ede394cc1faeb6dbf6a987e91abce552
7676 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7677 Date: Tue Feb 3 22:13:16 2009 +0100
7679 ppc4xx: Only fixup opb attached UARTs
7681 This patch updates the fdt UART clock fixup code to
7682 only touch CPU internal UARTs on 4xx systems.
7683 Only these UARTs are definitely clocked by gd->uart_clk.
7685 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7686 Signed-off-by: Stefan Roese <sr@denx.de>
7688 commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
7689 Author: Mike Frysinger <vapier@gentoo.org>
7690 Date: Tue Jan 13 11:00:29 2009 -0500
7692 Blackfin: move default boot SPI CS to common code
7694 Move the default SPI CS that we boot from into common code so that it can
7695 be used in other SPI drivers and environment settings.
7697 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7699 commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
7700 Author: Mike Frysinger <vapier@gentoo.org>
7701 Date: Wed Dec 10 12:33:54 2008 -0500
7703 Blackfin: dynamically update UART speed when initializing
7705 Previously, booting over the UART required the baud rate to be known ahead
7706 of time. Using a bit of tricky simple math, we can calculate the new board
7707 rate based on the old divisors.
7709 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7710 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
7712 commit 97f265f14f23050f3cb997f617f3a6917b843ea2
7713 Author: Mike Frysinger <vapier@gentoo.org>
7714 Date: Tue Dec 9 17:21:08 2008 -0500
7716 Blackfin: add support for fast SPI reads with Boot ROM
7718 Newer Blackfin boot roms support using the fast SPI read command rather than
7719 just the slow one. If the functionality is available, then use it.
7721 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7723 commit 67619982bfc5cd62710a48e3cbffc304cb78c341
7724 Author: Mike Frysinger <vapier@gentoo.org>
7725 Date: Sat Oct 11 21:46:52 2008 -0400
7727 Blackfin: check for reserved settings in DDR MMRs
7729 Some bits of the DDR MMRs should not be set. If they do, bad things may
7730 happen (like random failures or hardware destruction).
7732 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7734 commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
7735 Author: Mike Frysinger <vapier@gentoo.org>
7736 Date: Sat Oct 11 21:54:00 2008 -0400
7738 Blackfin: set default voltage levels for BF538/BF539 parts
7740 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7742 commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
7743 Author: Mike Frysinger <vapier@gentoo.org>
7744 Date: Sun Jun 1 01:29:57 2008 -0400
7746 Blackfin: use on-chip syscontrol() rom function when available
7748 Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
7749 to be used to properly program the memory and voltage settings as it will
7750 include (possibly critical) factory tested bias values.
7752 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7754 commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
7755 Author: Stefan Roese <sr@denx.de>
7756 Date: Thu Feb 5 11:44:52 2009 +0100
7758 cfi_flash: Fix typo in cfi_flash.c
7760 Patch "flash/cfi_flash: Use virtual sector start address, not phys"
7761 introduced a small typo and compilation warning for systems with CFI
7762 legacy support (e.g. hcu4). This patch fixes it.
7764 Signed-off-by: Stefan Roese <sr@denx.de>
7766 commit 28745db969b72693754991c838f68a7fb4a8b1ab
7767 Author: Stefan Roese <sr@denx.de>
7768 Date: Thu Jan 29 11:21:38 2009 +0100
7770 jedec_flash: Only use manufacturer defines from common flash.h
7772 This patch removes the double defined manufacturer defines from
7773 jedec_flash.c. Since the common defines in flash.h are 32bit
7774 we now need the (16) cast. This patch also removes the compilation
7775 warning (e.g. seen on hcu5):
7778 Configuring for hcu5 board...
7779 jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type
7781 Signed-off-by: Stefan Roese <sr@denx.de>
7783 commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
7784 Author: Stefan Roese <sr@denx.de>
7785 Date: Thu Feb 5 11:25:57 2009 +0100
7787 cfi_flash: Silence compilation warning
7789 Patch "flash/cfi_flash: Use virtual sector start address, not phys"
7790 introduced a small compilation warning. This patch fixes it.
7792 Signed-off-by: Stefan Roese <sr@denx.de>
7794 commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
7795 Author: Becky Bruce <beckyb@kernel.crashing.org>
7796 Date: Mon Feb 2 16:34:51 2009 -0600
7798 flash/cfi_flash: Use virtual sector start address, not phys
7800 include/flash.h was commented to say that the address in
7801 flash_info->start was a physical address. However, from u-boot's
7802 point of view, and looking at most flash code, it makes more
7803 sense for this to be a virtual address. So I corrected the
7804 comment to indicate that this was a virtual address.
7806 The only flash driver that was actually treating the address
7807 as physical was the mtd/cfi_flash driver. However, this code
7808 was using it inconsistently as it actually directly dereferenced
7809 the "start" element, while it used map_physmem to get a
7810 virtual address in other places. I changed this driver so
7811 that the code which initializes the info->start field calls
7812 map_physmem to get a virtual address, eliminating the need for
7813 further map_physmem calls. The code is now consistent.
7815 The *only* place a physical address should be used is when defining the
7816 flash banks list that is used to initialize the flash_info struct,
7817 usually found in the board config file.
7819 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7820 Signed-off-by: Stefan Roese <sr@denx.de>
7822 commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
7823 Author: Wolfgang Denk <wd@denx.de>
7824 Date: Wed Feb 4 09:42:20 2009 +0100
7826 Fix compiler warning
7828 (shows up only when DEBUG is enabled)
7830 Signed-off-by: Wolfgang Denk <wd@denx.de>
7832 commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
7833 Author: Mike Frysinger <vapier@gentoo.org>
7834 Date: Mon Oct 6 03:45:55 2008 -0400
7836 Blackfin: update anomaly lists
7838 Update the anomaly lists to match latest anomaly sheets.
7840 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7842 commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
7843 Author: Ralph Kondziella <rk@argos-messtechnik.de>
7844 Date: Mon Jan 26 12:34:36 2009 -0700
7846 ADS5121 Add PATA support
7848 Original patch from Ralph Kondziella
7849 plus clean up by Wolfgang Denk
7850 plus changes by John Rigby
7851 use ips clock not lpc
7852 port forward to current u-boot release
7854 Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
7855 Signed-off-by: Wolfgang Denk <wd@denx.de>
7856 Signed-off-by: John Rigby <jrigby@freescale.com>
7858 commit abfbd0ae4967df18102345db4f4b529a13da107b
7859 Author: Martha Marx <mmarx@silicontkx.com>
7860 Date: Mon Jan 26 10:45:07 2009 -0700
7862 ADS5121 Add IC Ident Module (IIM) support
7864 IIM (IC Identification Module) is the fusebox for the mpc5121.
7865 Use #define CONFIG_IIM to turn on the clock for this module
7866 use #define CONFIG_CMD_FUSE to add fusebox commands.
7867 Fusebox commands include the ability to read
7868 the status, read the register cache, override the register cache,
7869 program the fuses and sense them.
7871 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
7872 Signed-off-by: John Rigby <jrigby@freescale.com>
7874 commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
7875 Author: John Rigby <jrigby@freescale.com>
7876 Date: Fri Jan 23 10:33:15 2009 -0700
7878 ADS5121 Fix rev2 silicon pci iopad config
7880 Reset config is not correct
7882 Signed-off-by: John Rigby <jrigby@freescale.com>
7884 commit 4c154252c480b13f69ce1b71a9530b0515da76a6
7885 Author: John Rigby <jrigby@freescale.com>
7886 Date: Wed Nov 19 13:57:34 2008 -0700
7888 ADS5121 DIU Add diu_bmp_addr env
7890 Add support for using a bmp other than
7891 FSL_Logo_BMP for the DIU splash screen.
7893 Can now set the env var "diu_bmp_addr" to
7894 the address of a BMP in flash to use instead
7895 of the default FSL_Logo_BMP.
7897 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
7898 Signed-off-by: John Rigby <jrigby@freescale.com>
7900 commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
7901 Author: John Rigby <jrigby@freescale.com>
7902 Date: Thu Oct 30 16:39:35 2008 -0600
7904 ADS5121 DIU Make inclusion of FSL logo optional
7906 Make inclusion of FSL logo optional and
7907 turn it off by default.
7909 Signed-off-by: John Rigby <jrigby@freescale.com>
7911 commit bd99ec149abe94e7f6b2bda4766d701b4005053f
7912 Author: Remy Bohmer <linux@bohmer.net>
7913 Date: Sun Feb 1 12:27:53 2009 +0100
7915 Compile warning fix in onenand_uboot.h
7917 Regression since merge window after 2009.01
7919 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7921 commit a270d1e7295c3d829f42c0480117941dfc1c6477
7922 Author: Stefan Roese <sr@denx.de>
7923 Date: Thu Jan 29 06:33:55 2009 +0100
7925 USB: Add EHCI support for VCT EHCI controller (really with driver now)
7927 Somehow I missed the real driver part in my last patch version. This patch
7928 now adds the driver.
7930 Signed-off-by: Stefan Roese <sr@denx.de>
7931 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7933 commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
7934 Author: Cliff Cai <cliff.cai@analog.com>
7935 Date: Sat Nov 29 18:22:38 2008 -0500
7937 Blackfin: add driver for on-chip MMC/SD controller
7939 This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
7941 Signed-off-by: Cliff Cai <cliff.cai@analog.com>
7942 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7944 commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
7945 Author: Mike Frysinger <vapier@gentoo.org>
7946 Date: Sat Oct 11 22:47:34 2008 -0400
7948 Blackfin: add port muxing for BF51x SPI
7950 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7952 commit fc68f9f85959664d528daea2aef5ef54974331ce
7953 Author: Mike Frysinger <vapier@gentoo.org>
7954 Date: Tue Jan 6 06:16:19 2009 -0500
7956 Blackfin: output booting source when booting
7958 Knowing the booting source of the part is useful, especially when the part
7959 can switch dynamically between sources.
7961 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7963 commit 8df3ce0f49c37947800ac7c84e751499882619fc
7964 Author: Mike Frysinger <vapier@gentoo.org>
7965 Date: Thu Dec 11 06:30:46 2008 -0500
7967 Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
7969 Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
7970 the Blackfin on-chip bootrom to boot out of SPI flash.
7972 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7974 commit 2b4a486e6fac502d8b883e344cc4012283945b3d
7975 Author: Mike Frysinger <vapier@gentoo.org>
7976 Date: Thu Dec 11 04:06:26 2008 -0500
7978 Blackfin: update asm-blackfin/posix_types.h to latest Linux version
7980 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7982 commit e5eb93e77391bcc308697116c544ea1340aaae8a
7983 Author: Mike Frysinger <vapier@gentoo.org>
7984 Date: Sat Dec 6 02:54:52 2008 -0500
7986 Blackfin: add port I bits
7988 Some people need to access port I, so make sure the pins are defined.
7990 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7992 commit 8a6b272596d43de0db4943eac7af58c3534c4026
7993 Author: Sonic Zhang <Sonic.Zhang@analog.com>
7994 Date: Wed Nov 26 22:16:45 2008 -0500
7996 Blackfin: add driver for on-chip ATAPI controller
7998 This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
8000 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
8001 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8003 commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
8004 Author: Mike Frysinger <vapier@gentoo.org>
8005 Date: Wed Nov 26 21:43:06 2008 -0500
8007 Blackfin: add driver for on-chip NAND controller
8009 This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
8011 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8013 commit 4148e02abae9a099f4444b5e168ebc2b911d2295
8014 Author: Mike Frysinger <vapier@gentoo.org>
8015 Date: Wed Nov 12 07:18:15 2008 -0500
8017 Blackfin: build with -mno-fdpic
8019 Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
8020 up u-boot, including ones that output FDPIC ELF by default.
8022 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8024 commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
8025 Author: Mike Frysinger <vapier@gentoo.org>
8026 Date: Tue Nov 11 05:43:57 2008 -0500
8028 Blackfin: fix up EBIU defines
8030 The EBIU defines for EBSZ 256/512 were incorrect.
8032 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8034 commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
8035 Author: Mike Frysinger <vapier@gentoo.org>
8036 Date: Wed Nov 5 12:45:24 2008 -0500
8038 Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
8040 Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
8041 as usable with the source/destination addresses and the count size.
8043 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8045 commit b93c68648426f906d63b98117496b6415f505f39
8046 Author: Mike Frysinger <vapier@gentoo.org>
8047 Date: Wed Nov 5 08:50:23 2008 -0500
8049 Blackfin: only flag L1 instruction for DMA memcpy
8051 The performance difference from doing an 8 bit DMA memcpy vs an optimized
8052 core memcpy can be pretty big when you add in the overhead of setting up the
8053 MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
8054 actually require it.
8056 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8058 commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
8059 Author: Mike Frysinger <vapier@gentoo.org>
8060 Date: Wed Nov 5 07:20:37 2008 -0500
8062 Blackfin: dma_memcpy(): fix random failures
8064 We have to make sure the DMA channel is actually disabled in hardware before
8065 attempting to reprogram it. Otherwise the new settings are ignored and we
8066 end up with random hangs/failures.
8068 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8070 commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
8071 Author: Mike Frysinger <vapier@gentoo.org>
8072 Date: Tue Nov 4 00:04:03 2008 -0500
8074 Blackfin: rewrite cache handling functions
8076 Take the cache flush functions from the kernel as they use hardware loops in
8077 order to get optimal performance.
8079 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8081 commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
8082 Author: Mike Frysinger <vapier@gentoo.org>
8083 Date: Mon Nov 3 22:30:05 2008 -0500
8085 Blackfin: setup bi_enetaddr for single nets
8087 For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
8088 based on $ethaddr, so set it up.
8090 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8092 commit 40599239e7875b39e2a5c12e6545992041c72c52
8093 Author: Mike Frysinger <vapier@gentoo.org>
8094 Date: Fri Oct 24 22:48:47 2008 -0400
8096 Blackfin: cache core/system clock values
8098 Calculating the clocks requires a bit of calls to gcc math functions, so
8099 cache the values after the first run since they'll most likely never
8100 change once U-Boot is up and running.
8102 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8104 commit 6957a6209b02f6b69607fc47425f13731cc477f1
8105 Author: Mike Frysinger <vapier@gentoo.org>
8106 Date: Fri Oct 24 18:18:16 2008 -0400
8108 Blackfin: enable --gc-sections
8110 Start building all Blackfin boards with -ffunction-sections/-fdata-sections
8111 and linking with --gc-sections.
8113 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8115 commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
8116 Author: Mike Frysinger <vapier@gentoo.org>
8117 Date: Mon Oct 20 21:08:54 2008 -0400
8119 Blackfin: dont check baud if it wont actually get used
8121 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8123 commit 400f5778f375bc99c73c8488c555def261ccfab7
8124 Author: Mike Frysinger <vapier@gentoo.org>
8125 Date: Tue Oct 14 07:54:09 2008 -0400
8127 Blackfin: add driver for on-chip SPI controller
8129 This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
8131 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8133 commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
8134 Author: Mike Frysinger <vapier@gentoo.org>
8135 Date: Sat Oct 18 05:33:51 2008 -0400
8137 Blackfin: only build post code when CONFIG_POST
8139 Save some time by using CONFIG_POST in the Makefile rather than C files.
8141 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8143 commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
8144 Author: Mike Frysinger <vapier@gentoo.org>
8145 Date: Thu Jan 8 11:57:57 2009 -0500
8147 Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
8149 Redo how pointers are managed to get rid of ugly casts and strict pointer
8150 aliasing issues that are highlighted by gcc 4.3.
8152 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8153 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8155 commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
8156 Author: Mike Frysinger <vapier@gentoo.org>
8157 Date: Tue Dec 9 17:46:21 2008 -0500
8159 Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
8161 No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
8162 does exactly the same thing as common "CONFIG_RMII".
8164 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8165 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8167 commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
8168 Author: Mike Frysinger <vapier@gentoo.org>
8169 Date: Wed Nov 5 06:36:15 2008 -0500
8171 Blackfin: bfin_mac: use common debug()
8173 Rather then defining our own DEBUGF(), just use the common debug().
8175 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8176 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8178 commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
8179 Author: Mike Frysinger <vapier@gentoo.org>
8180 Date: Mon Oct 20 13:59:51 2008 -0400
8182 Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
8184 Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
8185 of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
8187 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8188 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8190 commit ac45af4e63ea925f4accc98453aab1a1166c196d
8191 Author: Mike Frysinger <vapier@gentoo.org>
8192 Date: Tue Oct 14 04:52:00 2008 -0400
8194 Blackfin: bfin_mac: cleanup MII/PHY functions
8196 Cleanup and rewrite the MII/PHY related functions so that we can reuse the
8197 existing common linux/miiphy.h code and hook into the `mii` command.
8199 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8200 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8202 commit 6b310a05f0d10c751f22468040932139f71c71d3
8203 Author: Mike Frysinger <vapier@gentoo.org>
8204 Date: Tue Oct 14 00:31:30 2008 -0400
8206 Blackfin: bfin_mac: set MDCDIV based on SCLK
8208 Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
8209 use the real algorithm so it gets set correctly regardless of SCLK.
8211 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8212 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8214 commit 930590f3e49c8f32256edf2e5861e1535a329c6c
8215 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8216 Date: Sat Jan 31 09:10:48 2009 +0100
8218 ixp: move serial to drivers/serial
8220 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8222 commit f90c8022f448bc5e93090e4b714368e52e912f0f
8223 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8224 Date: Sat Jan 31 09:04:58 2009 +0100
8226 ixp: move pci init in arm/board instead of cpu
8228 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8230 commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
8231 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8232 Date: Sat Jan 31 08:56:49 2009 +0100
8234 ixp: move pci drivers to drivers/pci
8236 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8238 commit 012d5bab09a534e4800b02f50cf508e6837202ea
8239 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8240 Date: Sat Jan 31 08:53:44 2009 +0100
8242 ixp: Move conditional compilation to Makefile
8244 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8246 commit f693f501d67434df1f815fd1824a71973ae08207
8247 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8248 Date: Sat Jan 31 08:53:44 2009 +0100
8250 ixp: add missing os define
8252 need by arm-elf toolchains and no impact on the arm-linux one
8254 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8256 commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
8257 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8258 Date: Sat Jan 31 09:53:39 2009 +0100
8260 ixp: remove the option to include the Microcode
8262 instead the board will have to load it from flash or ram
8263 which will be specified by npe_ucode env var
8265 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8267 commit 1b017baf2071d8daf643bce87250db898c606c66
8268 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8269 Date: Fri Jan 30 09:45:23 2009 +0100
8271 ixp/npe: Move conditional compilation to Makefile
8273 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8275 commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
8276 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8277 Date: Wed Jan 28 21:58:04 2009 +0100
8279 SX1: add hardware V2 support
8281 In the V2 the 2 flash has been replace by one 32MB flash
8283 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8285 commit f877f2233dbcd7417c2f0babe6a849099b167f3c
8286 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8287 Date: Wed Jan 28 21:58:03 2009 +0100
8289 SX1: Fix second flash mapping
8291 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8293 commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
8294 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8295 Date: Wed Jan 28 21:58:03 2009 +0100
8297 SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
8299 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8301 commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
8302 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8303 Date: Wed Jan 28 21:57:59 2009 +0100
8305 move Samsung's board to board/samsung
8307 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8309 commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
8310 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8311 Date: Thu Jan 29 12:07:21 2009 +0100
8313 move ARM Ltd. to vendor dir
8315 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8317 commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
8318 Author: Larry Johnson <lrj@acm.org>
8319 Date: Wed Jan 28 15:30:37 2009 -0500
8321 ppc4xx: Clean up configuration file for Korat board
8323 This patch updates the default environmental variables for the
8324 Korat PPC 440EPx board, and makes additional minor fixes.
8326 Signed-off-by: Larry Johnson <lrj@acm.org>
8327 Signed-off-by: Stefan Roese <sr@denx.de>
8329 commit f20405e31680efc36293c59b4963db57c9d93df4
8330 Author: Larry Johnson <lrj@acm.org>
8331 Date: Wed Jan 28 15:30:02 2009 -0500
8333 ppc4xx: Add variable "korat_usbcf" for Korat board
8335 The new environment variable "korat_usbcf" selects the USB
8336 port used by the Korat board's CompactFlash controller.
8338 Signed-off-by: Larry Johnson <lrj@acm.org>
8339 Signed-off-by: Stefan Roese <sr@denx.de>
8341 commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
8342 Author: Gunnar Rangoy <gunnar@rangoy.com>
8343 Date: Fri Jan 23 12:56:31 2009 +0100
8345 AVR32: macb - Search for PHY id
8347 This patch adds support for searching through available PHY-addresses in
8348 the macb-driver. This is needed for the ATEVK1100 evaluation board,
8349 where the PHY-address will be initialized to either 1 or 7.
8351 This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
8352 enabled tells the driver to search for the PHY address.
8354 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
8355 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
8356 Signed-off-by: Olav Morken <olavmrk@gmail.com>
8357 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8359 commit af8626e0c08a780d9ded1d9c4883a89355f60e75
8360 Author: Olav Morken <olavmrk@gmail.com>
8361 Date: Fri Jan 23 12:56:26 2009 +0100
8363 Fix IP alignment problem
8365 This patch removes volatile from:
8366 volatile IP_t *ip = (IP_t *)xip;
8368 Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
8369 using volatile, which causes an exception since xip isn't aligned on a word
8372 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
8373 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
8374 Signed-off-by: Olav Morken <olavmrk@gmail.com>
8375 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8377 commit 12a8b9db12f82a189ff143a58731007f5469da61
8378 Author: Ron Madrid <ron_madrid@sbcglobal.net>
8379 Date: Wed Jan 28 16:17:21 2009 -0800
8381 Marvell 88E1118 interrupt fix
8383 This patch adjusts the LED control so that interrupt lines are not reading LEDs
8384 and effectively causing indefinite interrupts to the controller.
8386 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
8387 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8389 commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
8390 Author: Stefan Roese <sr@denx.de>
8391 Date: Wed Jan 21 17:14:26 2009 +0100
8393 net: smc911x.c: Add LAN9211 to chip_ids[] array
8395 Signed-off-by: Stefan Roese <sr@denx.de>
8396 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8398 commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
8399 Author: Mike Frysinger <vapier@gentoo.org>
8400 Date: Tue Jan 27 16:53:39 2009 -0500
8402 Move is_valid_ether_addr() to include/net.h
8404 Import the is_valid_ether_addr() function from the Linux kernel.
8406 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8407 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8409 commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
8410 Author: Michal Simek <monstr@monstr.eu>
8411 Date: Mon Jan 5 12:25:13 2009 +0100
8413 net: Sort Makefile labels
8415 Signed-off-by: Michal Simek <monstr@monstr.eu>
8416 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8418 commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
8419 Author: Wolfgang Denk <wd@denx.de>
8420 Date: Wed Jan 28 23:06:42 2009 +0100
8422 85xx: Fix compile breakage with sbc8540 and sbc8560
8424 This fixes an error which raises just a warning:
8425 sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
8427 Signed-off-by: Wolfgang Denk <wd@denx.de>
8429 commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
8430 Author: Mike Frysinger <vapier@gentoo.org>
8431 Date: Wed Jan 28 13:48:55 2009 -0500
8433 SPD823TS: do not define CONFIG_CMD_ENV
8435 Since the SPD823TS board does not actually have any writable flash to save
8436 its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
8439 This fixes the build error:
8440 common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
8441 common/cmd_nvedit.c:557: undefined reference to `saveenv'
8442 make: *** [u-boot] Error 1
8444 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8446 commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
8447 Author: Dirk Behme <dirk.behme@googlemail.com>
8448 Date: Wed Jan 28 21:40:16 2009 +0100
8450 OMAP3: Add Zoom1 board support
8452 Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
8453 http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
8455 Signed-off-by: Nishanth Menon <nm@ti.com>
8456 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
8458 commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
8459 Author: Dirk Behme <dirk.behme@googlemail.com>
8460 Date: Wed Jan 28 21:39:58 2009 +0100
8462 OMAP3: Add Pandora support
8464 Add Pandora support.
8466 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
8467 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8468 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
8470 commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
8471 Author: Dirk Behme <dirk.behme@googlemail.com>
8472 Date: Wed Jan 28 21:39:58 2009 +0100
8474 OMAP3: Add EVM board
8476 Add EVM board support.
8478 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
8479 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8480 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
8482 commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
8483 Author: Dirk Behme <dirk.behme@googlemail.com>
8484 Date: Wed Jan 28 21:39:57 2009 +0100
8486 OMAP3: Add Overo board
8488 Add Overo board support.
8490 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
8491 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8492 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
8494 commit f904cdbb68167c647887f19929ad295dbaac8862
8495 Author: Dirk Behme <dirk.behme@googlemail.com>
8496 Date: Tue Jan 27 18:19:12 2009 +0100
8498 OMAP3: Add common power code, README, and BeagleBoard
8500 Add BeagleBoard support, common power code and README.
8502 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
8503 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8505 commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
8506 Author: Kumar Gala <galak@kernel.crashing.org>
8507 Date: Wed Jan 28 08:31:10 2009 -0600
8509 85xx: Fix compile breakage with MPC8540EVAL
8511 Configuring for MPC8540EVAL board...
8512 mpc8540eval.c: In function 'checkboard':
8513 mpc8540eval.c:53: error: invalid operands to binary /
8514 make[1]: *** [mpc8540eval.o] Error 1
8516 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8518 commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
8519 Author: Bryan Wu <bryan.wu@analog.com>
8520 Date: Sun Jan 18 23:04:27 2009 -0500
8522 usb_scan_devices: fix output with no devices
8524 We should check the return of usb_new_device() so that if no USB device is
8525 found, we print out the right message rather than always saying "new usb
8528 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
8529 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8530 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8532 commit f1c1f540243438246aefb703fdcf16957e3a72e1
8533 Author: Stefan Roese <sr@denx.de>
8534 Date: Thu Jan 22 10:11:21 2009 +0100
8536 USB: Add high-speed (480Mb/s) to all USB related outputs
8538 With this patch the USB related connection speed output ("usb tree" command and
8539 debug output) is now high-speed enabled.
8541 This patch also fixes a compilation warning when debugging is enabled.
8543 Signed-off-by: Stefan Roese <sr@denx.de>
8544 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8546 commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
8547 Author: Stefan Roese <sr@denx.de>
8548 Date: Wed Jan 21 17:12:19 2009 +0100
8550 USB: Add dcache support to the EHCI driver
8552 This patch adds routines to handle (flush/invalidate) the dcache for the
8553 QH and qTD structures and data buffers. This is needed on platforms using
8554 this EHCI support with dcache enabled (like the MIPS VCT board port).
8556 Signed-off-by: Stefan Roese <sr@denx.de>
8557 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8559 commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
8560 Author: Stefan Roese <sr@denx.de>
8561 Date: Wed Jan 21 17:12:28 2009 +0100
8563 USB: Add EHCI support for VCT EHCI controller
8565 Signed-off-by: Stefan Roese <sr@denx.de>
8566 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8568 commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
8569 Author: Stefan Roese <sr@denx.de>
8570 Date: Wed Jan 21 17:12:10 2009 +0100
8572 USB: Add config option to call ehci_hcd_init() again after EHCI reset
8574 This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
8575 to call ehci_hcd_init() again after ehci_reset() is executed. This
8576 is needed for the upcoming VCT EHCI support which needs to re-init
8577 the hcd part again after the EHCI CMD_RESET is executed.
8579 Signed-off-by: Stefan Roese <sr@denx.de>
8580 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8582 commit 597eb28bd9691266b7b804364cda577cdb51d106
8583 Author: Stefan Roese <sr@denx.de>
8584 Date: Wed Jan 21 17:12:01 2009 +0100
8586 USB: Fix speed detection on EHCI cntr with root hub transaction translators
8588 This patch fixes an issue that the speed of USB devices was not detected
8589 correctly on some EHCI controllers. This will be used on the upcoming VCT
8592 Signed-off-by: Stefan Roese <sr@denx.de>
8593 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8595 commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
8596 Author: Thomas Abraham <t-abraham@ti.com>
8597 Date: Sun Jan 4 09:41:20 2009 +0530
8599 usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
8601 Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
8604 Signed-off-by: Ravi Babu <ravibabu@ti.com>
8605 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
8606 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
8607 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
8608 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8610 commit 538ef967715322f64ee08efa2296d9682111b014
8611 Author: Thomas Abraham <t-abraham@ti.com>
8612 Date: Sun Jan 4 09:41:16 2009 +0530
8614 usb : musb : Enabling DM6446 (TI DaVinci) USB module power
8616 Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
8617 controller hook up to USB core layer.
8619 Signed-off-by: Ravi Babu <ravibabu@ti.com>
8620 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
8621 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
8622 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
8623 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8625 commit e142e9f35f8ec61e74bf8019428b003f5070c33b
8626 Author: Thomas Abraham <t-abraham@ti.com>
8627 Date: Sun Jan 4 09:41:13 2009 +0530
8629 usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
8631 Adding DM6446 (TI DaVinci) platform specific USB functionality for
8632 USB Phy and VBUS initialization.
8634 Signed-off-by: Ravi Babu <ravibabu@ti.com>
8635 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
8636 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
8637 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
8638 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8640 commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
8641 Author: Thomas Abraham <t-abraham@ti.com>
8642 Date: Sun Jan 4 09:41:09 2009 +0530
8644 usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
8646 Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
8649 Signed-off-by: Ravi Babu <ravibabu@ti.com>
8650 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
8651 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
8652 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
8653 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8655 commit a142896934c755e679ba87e227a8e449f39b0012
8656 Author: Thomas Abraham <t-abraham@ti.com>
8657 Date: Sun Jan 4 09:41:03 2009 +0530
8659 usb : musb : Adding host controller driver for Mentor USB controller
8661 Adding Mentor USB core functionality and Mentor USB Host controller
8662 functionality for Mentor USB OTG controller (musbhdrc).
8664 Signed-off-by: Ravi Babu <ravibabu@ti.com>
8665 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
8666 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
8667 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
8668 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8670 commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
8671 Author: Mike Frysinger <vapier@gentoo.org>
8672 Date: Thu Jan 1 18:27:27 2009 -0500
8674 usb.h: use standard __LITTLE_ENDIAN from Linux headers
8676 Rather than forcing people to define a custom "LITTLEENDIAN", just use the
8677 __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
8680 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8681 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8683 commit 7b6e31eb17e3ff76238a60803fc531517d516223
8684 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8685 Date: Wed Dec 31 10:33:56 2008 +0100
8687 USB ehci ixp4xx support
8689 Add USB ehci ixp4xx host controller. Test on ixdp465 board.
8691 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8692 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8694 commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
8695 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8696 Date: Wed Dec 31 10:33:22 2008 +0100
8698 USB ehci remove infinite loop and use handshake function
8700 USB ehci code cleanup. Use handshake instead of infinite while loop
8701 to check the STD_ASS status
8703 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8704 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8706 commit 8fea2914ac974029b65926ef8247d908f84d202d
8707 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8708 Date: Wed Dec 31 10:32:41 2008 +0100
8710 Add initial support for USB ehci pci
8712 Add USB ehci pci support. This patch doesn't include any
8713 pci_ids and it is not tested on real hardware.
8715 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8716 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8718 commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
8719 Author: Bryan Wu <Bryan.Wu@analog.com>
8720 Date: Thu Jan 1 19:48:07 2009 -0500
8722 usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
8724 The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
8725 does not like to be reset, so check for it.
8727 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
8728 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8729 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8731 commit 1eb734fed3b79a5e6106dad16e88041894fdab30
8732 Author: Thomas Abraham <t-abraham@ti.com>
8733 Date: Sun Jan 4 12:15:35 2009 +0530
8735 usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
8737 This patch populates the 'priv' field of the USB keyboard device_t
8738 structure. The 'priv' field is populated with the address of the
8739 'struct usb_device' structure that represents the USB device.
8741 The 'priv' field can then be used in the 'usb_event_poll' function to
8742 determine the USB device that requires to be polled. An
8743 example of its usage in 'usb_event_poll' function is as below.
8746 struct usb_device *usb_kbd_dev;
8750 dev = device_get_by_name("usbkbd");
8751 usb_kbd_dev = (struct usb_device *)dev->priv;
8752 iface = &usb_kbd_dev->config.if_desc[0];
8754 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
8755 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8757 commit 366523c26b6320af171459b19e6e0e9e3baa83ca
8758 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8759 Date: Thu Dec 18 10:05:37 2008 +0100
8763 USB changes the speed according to the port status
8765 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8766 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8768 commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
8769 Author: Remy Böhmer <linux@bohmer.net>
8770 Date: Sat Dec 13 22:51:58 2008 +0100
8772 EHCI fix code and ixp4xx test.
8773 USB ehci configuration parameter:
8775 #define CONFIG_CMD_USB 1
8776 #define CONFIG_USB_STORAGE 1
8777 #define CONFIG_USB_EHCI
8778 #define CONFIG_USB_EHCI_IXP4XX 1
8779 #define CONFIG_EHCI_IS_TDI 1
8780 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1
8781 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
8782 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
8783 #define CONFIG_LEGACY_USB_INIT_SEQ 1
8785 2 USB Device(s) found
8786 scanning bus for storage devices... 0 Storage Device(s) found
8790 1 Hub (1.5MBit/s, 0mA)
8791 | u-boot EHCI Host Controller
8793 |+-2 Mass Storage (12MBit/s, 100mA)
8794 Sony Storage Media 0C07040930296
8798 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8799 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8801 commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
8802 Author: michael <michael@panicking.retis>
8803 Date: Thu Dec 11 13:43:55 2008 +0100
8805 [PATCH] This patch add varius fix to the ehci.
8806 - fix ehci_readl, ehci_writel
8807 - introduce new define in ehci.h
8808 - introduce the handshake function for waiting on a register
8809 - fix usb_ehci_fsl with the new HC_LENGTH macro
8811 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8812 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8814 commit db63299b1dd2894ade542278210bccd046de6435
8815 Author: michael <michael@panicking.retis>
8816 Date: Wed Dec 10 17:55:19 2008 +0100
8818 [PATCH] Fix EHCI usb. I start to test on a
8819 IXP465 board and I find some errors in the code. This
8821 - descriptor initizialization (config, interface and endpoint
8822 must be one next-to the other when the USB_DT_CONFIG message
8824 - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
8825 and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
8826 - Introduce the linux version of the usb_config_descriptor and
8827 usb_interface descriptor. This descriptor does't contains
8830 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8831 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8833 commit 6b92487dcf9afe83a3570153d66940fdb293be76
8834 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8835 Date: Fri Nov 28 13:22:09 2008 +0100
8837 USB ehci freescale support
8839 Add USB ehci freescale support
8841 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8842 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8844 commit aaf098cfeed04595d4c5100ffd39095d79edbf90
8845 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8846 Date: Fri Nov 28 13:20:46 2008 +0100
8848 USB ehci core support
8850 Add USB ehci core support
8852 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8853 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8855 commit 3e126484df7868e341545cce740b24b62b0cd3b7
8856 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8857 Date: Fri Nov 28 13:19:19 2008 +0100
8859 Prepare USB layer for ehci
8861 Prepare USB layer for ehci support
8863 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8864 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8866 commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
8867 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8868 Date: Wed Dec 10 15:52:06 2008 +0100
8870 USB storage cleanup patch
8874 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8875 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8877 commit fe033ad6d0883063fe857237abb9436fab03208c
8878 Author: Mike Frysinger <vapier@gentoo.org>
8879 Date: Sun Oct 12 06:02:55 2008 -0400
8881 Blackfin: fixup misc warnings such as printf's and missing casts
8883 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8885 commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
8886 Author: Mike Frysinger <vapier@gentoo.org>
8887 Date: Sun Oct 12 22:09:26 2008 -0400
8889 Blackfin: convert old boards to use COBJS-y Makefile style
8891 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8893 commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
8894 Author: Mike Frysinger <vapier@gentoo.org>
8895 Date: Sat Oct 11 22:38:37 2008 -0400
8897 Blackfin: bf533-stamp: rewrite resource swap logic
8899 The old swap function tended to clobber unrelated pins and screw up masks.
8900 Rewrite the thing from scratch so it only uses the resources it needs.
8902 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8904 commit 29d4ea0a9073c82469184331010136f52edf8db6
8905 Author: Mike Frysinger <vapier@gentoo.org>
8906 Date: Sat Oct 11 22:08:42 2008 -0400
8908 Blackfin: bootldr: implement BF53x/BF56x LDR loader
8910 The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
8911 arbitrary memory locations, so implement a basic one in software.
8913 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8915 commit 8b35e3aeff6c2d747c37697997b3f8a808432329
8916 Author: Mike Frysinger <vapier@gentoo.org>
8917 Date: Sat Oct 11 22:05:42 2008 -0400
8919 Blackfin: implement real write support for OTP
8921 Now that real documentation has been released for the OTP interface and
8922 the on-chip ROM wrt writing/timings, implement support for reading/writing
8923 as well as dumping/locking.
8925 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8927 commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
8928 Author: Mike Frysinger <vapier@gentoo.org>
8929 Date: Sat Oct 11 22:04:05 2008 -0400
8931 Blackfin: update on-chip ROM API
8933 This brings the API for the on-chip ROM in line with the toolchain and
8934 hardware documentation.
8936 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8938 commit 7633903bff432ec7b27905dce7396958553f2be6
8939 Author: Mike Frysinger <vapier@gentoo.org>
8940 Date: Sat Oct 11 21:52:17 2008 -0400
8942 Blackfin: allow serial console to be disabled
8944 Some devices have no UART device pulled out, so allow people to disable the
8945 driver completely in favor of other methods (like JTAG-console).
8947 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8949 commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
8950 Author: Mike Frysinger <vapier@gentoo.org>
8951 Date: Sat Oct 11 21:51:20 2008 -0400
8953 Blackfin: support console-over-JTAG
8955 The Blackfin JTAG has the ability to pass data via a back-channel without
8956 halting the processor. Utilize that channel to emulate a console.
8958 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8960 commit cf8f2efb5f39c5225da92391c14a07eecbeca881
8961 Author: Mike Frysinger <vapier@gentoo.org>
8962 Date: Sat Oct 11 21:49:06 2008 -0400
8964 Blackfin: handle new anomalies with reset
8966 Workaround fun new anomalies related to software reset of the processor.
8968 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8970 commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
8971 Author: Mike Frysinger <vapier@gentoo.org>
8972 Date: Sat Oct 11 21:44:00 2008 -0400
8974 Blackfin: pass RETX to Linux
8976 Make sure we save the value of RETX at power on and then pass it on to the
8977 kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
8979 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8981 commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
8982 Author: Mike Frysinger <vapier@gentoo.org>
8983 Date: Sat Oct 11 21:40:26 2008 -0400
8985 Blackfin: clarify relocation comment during init
8987 People often ask questions about the init process and when things go
8988 from flash to relocated base, so clarify the comments a bit.
8990 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8992 commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
8993 Author: Mike Frysinger <vapier@gentoo.org>
8994 Date: Sat Oct 11 21:23:41 2008 -0400
8996 Blackfin: just set SP register directly during init
8998 No need to set the SP register indirectly to the configured value when it
8999 can be set directly.
9001 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9003 commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
9004 Author: Mike Frysinger <vapier@gentoo.org>
9005 Date: Sat Oct 11 21:15:53 2008 -0400
9007 Blackfin: add portmuxing for UARTs on the BF51x
9009 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9011 commit 4f6a313240c531042f16909a3a170ab047b95779
9012 Author: Mike Frysinger <vapier@gentoo.org>
9013 Date: Sun Jun 1 01:26:29 2008 -0400
9015 Blackfin: respect CONFIG_CLKIN_HALF
9017 As pointed out by Ivan Koryakovskiy, the initialization code was not
9018 actually respecting the CONFIG_CLKIN_HALF option when configuring the
9021 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9023 commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
9024 Author: Mike Frysinger <vapier@gentoo.org>
9025 Date: Sun Jun 1 01:21:34 2008 -0400
9027 Blackfin: use common memcpy routine during init
9029 Rather than using a local custom memcpy function, just call the existing
9030 optimized Blackfin version.
9032 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9034 commit 362c943347364e9373af4c5530778491ab56ec2e
9035 Author: Mike Frysinger <vapier@gentoo.org>
9036 Date: Wed Apr 9 02:27:06 2008 -0400
9038 Blackfin: set default boot SPI CS for BF538/BF539
9040 The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
9043 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9045 commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
9046 Author: Mike Frysinger <vapier@gentoo.org>
9047 Date: Wed Apr 9 02:20:59 2008 -0400
9049 Blackfin: punt unused BF533-STAMP definitions
9051 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9053 commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
9054 Author: Mike Frysinger <vapier@gentoo.org>
9055 Date: Fri Apr 18 20:44:11 2008 -0400
9057 Blackfin: resurrect BF533-STAMP video splash driver
9059 This video driver used to live in the Blackfin cpu directory, but it was
9060 lost during the unification process. This brings it back.
9062 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9064 commit a750d038f2548d846ea1e046d873dc932d041319
9065 Author: Mike Frysinger <vapier@gentoo.org>
9066 Date: Wed Apr 9 02:31:29 2008 -0400
9068 Blackfin: tighten up post memory coding style
9070 No functional changes here; just cleanup code style a bit.
9072 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9074 commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
9075 Author: Mike Frysinger <vapier@gentoo.org>
9076 Date: Wed Apr 9 02:29:18 2008 -0400
9078 Blackfin: bf537-stamp nand: fix more style errors in previous commit
9080 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9082 commit 41f3325ae9add641036d7cb362e884b698e53f07
9083 Author: Mike Frysinger <vapier@gentoo.org>
9084 Date: Sat Oct 11 20:31:17 2008 -0400
9086 Blackfin: drop dead/wrong debug code in initdram()
9088 The DEBUG code in initdram() is quite old and was never really useful, so
9089 just drop it altogether. Common Blackfin debug code does a better job.
9091 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9093 commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
9094 Author: Mike Frysinger <vapier@gentoo.org>
9095 Date: Sat Oct 11 20:30:28 2008 -0400
9097 Blackfin: bf533-ezkit: shuffle flash defines a little
9099 Some of the flash defines weren't in the correct location and caused build
9100 problems in some configurations, so let's move types and defines to better
9103 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9105 commit be853bf86b41e91f4c422f0f56fdf87ea3191266
9106 Author: Mike Frysinger <vapier@gentoo.org>
9107 Date: Mon Oct 6 04:16:47 2008 -0400
9109 Blackfin: overhaul i2c driver
9111 The current Blackfin i2c driver does not work properly with certain devices
9112 due to it breaking up transfers incorrectly. This is a rewrite of the
9113 driver and relocates it to the newer place in the source tree.
9115 Also remove duplicated I2C speed defines in Blackfin board configs and
9116 disable I2C slave address usage since it isn't implemented.
9118 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9120 commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
9121 Author: Mike Frysinger <vapier@gentoo.org>
9122 Date: Mon Oct 6 04:00:07 2008 -0400
9124 Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
9126 Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
9127 128kB when setting up the default flash protection region for U-Boot
9130 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9132 commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
9133 Author: Mike Frysinger <vapier@gentoo.org>
9134 Date: Mon Oct 6 03:57:39 2008 -0400
9136 Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
9138 When setting up the global data, rather than relying on sizeof(), use the
9139 common CONFIG_SYS_GBL_DATA_SIZE define.
9141 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9143 commit 01815c2d06c5b838f2cd536703e47bd2c9148194
9144 Author: Mike Frysinger <vapier@gentoo.org>
9145 Date: Mon Oct 6 03:52:24 2008 -0400
9147 Blackfin: implement general support for CONFIG_STATUS_LED
9149 Here are the Blackfin-specific and board-independent pieces for status leds.
9151 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9153 commit 6882b5a79a3247494b62c05015fa672557f1bfaa
9154 Author: Mike Frysinger <vapier@gentoo.org>
9155 Date: Mon Oct 6 03:49:32 2008 -0400
9157 Blackfin: do not init i2c in Blackfin board init
9159 The common code takes care of calling i2c_init() when needed, so no point
9160 in us doing it as well.
9162 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9164 commit 1118ea73698eee6e72ef5cbfc00e41746040304f
9165 Author: Mike Frysinger <vapier@gentoo.org>
9166 Date: Mon Oct 6 03:42:20 2008 -0400
9168 Blackfin: bfin_mac: update port muxing
9170 Adds support more Blackfin parts and fixes broken muxing for older ones.
9172 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9174 commit 05b75e48832fc4afeecf8e76d704349557dffa35
9175 Author: Mike Frysinger <vapier@gentoo.org>
9176 Date: Mon Oct 6 03:35:44 2008 -0400
9178 Blackfin: fix dcache handling when doing dma memcpy's
9180 Our dcache invalidate function doesn't just invalidate, it also flushes.
9181 So rename the function accordingly and fix the dma_memcpy() function so it
9182 doesn't inadvertently corrupt the data destination.
9184 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9186 commit 68e5632494168095d75f120af70043b68afd2476
9187 Author: Mike Frysinger <vapier@gentoo.org>
9188 Date: Thu Aug 7 18:56:56 2008 -0400
9190 Blackfin: dont generate ldrs with --force
9192 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9194 commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
9195 Author: Mike Frysinger <vapier@gentoo.org>
9196 Date: Thu Aug 7 18:55:30 2008 -0400
9198 Blackfin: pass --bmode/--initcode when creating ldr
9200 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9202 commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
9203 Author: Mike Frysinger <vapier@gentoo.org>
9204 Date: Thu Aug 7 18:39:27 2008 -0400
9206 Blackfin: minimize time cache is turned off when replacing cplb entries
9208 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9210 commit 21d631360430cf0ae9099612273cd4de28911ba9
9211 Author: Mike Frysinger <vapier@gentoo.org>
9212 Date: Thu Aug 7 15:31:13 2008 -0400
9214 Blackfin: split cache handling out of dma_memcpy()
9216 Creating a new dma_memcpy() function that skips all cache checks allows us
9217 to use the function in very early init where the cache is not yet setup.
9219 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9221 commit d31eb38512bed377d5d4b3c696662e52120a2e4c
9222 Author: Mike Frysinger <vapier@gentoo.org>
9223 Date: Thu Aug 7 15:30:49 2008 -0400
9225 Blackfin: abort dma_memcpy() for L1 scratchpad
9227 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9229 commit 81b799add709177e838466461f7b9989488b0fd5
9230 Author: Mike Frysinger <vapier@gentoo.org>
9231 Date: Thu Aug 7 15:27:52 2008 -0400
9233 Blackfin: rename bootm.c to boot.c
9235 The boot file contains functions for more than just "bootm", so rename it
9238 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9240 commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
9241 Author: Mike Frysinger <vapier@gentoo.org>
9242 Date: Thu Aug 7 13:22:37 2008 -0400
9244 Blackfin: set more sane default board config values
9246 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9248 commit 36cd52a00794fb15ffab05d640acca92d7482993
9249 Author: Mike Frysinger <vapier@gentoo.org>
9250 Date: Thu Aug 7 15:24:59 2008 -0400
9252 Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
9254 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9256 commit c8054bc12e00669bd7588f2b30fef48aa94babac
9257 Author: Mike Frysinger <vapier@gentoo.org>
9258 Date: Thu Aug 7 13:21:27 2008 -0400
9260 Blackfin: add bit defines for DDR parts
9262 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9264 commit 154502fe0796f3b7a4698378c5d2080ae28a9782
9265 Author: Mike Frysinger <vapier@gentoo.org>
9266 Date: Thu Aug 7 13:21:11 2008 -0400
9268 Blackfin: add defines to describe active bootrom behavior
9270 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9272 commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
9273 Author: Kim Phillips <kim.phillips@freescale.com>
9274 Date: Tue Jan 27 16:03:53 2009 -0600
9276 mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
9278 extend commit c70564e6b1bd08f3230182392238907f3531a87e
9279 "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
9280 to the simpc8313 build and fix this:
9282 ...Large Page NAND...Configuring for SIMPC8313 board...
9283 nand_boot_fsl_elbc.o: In function `nand_boot':
9284 nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
9285 make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
9286 make: *** [nand_spl] Error 2
9288 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9290 commit 54a7cc4912feefa45be961cc47cc159563725d2f
9291 Author: Wolfgang Denk <wd@denx.de>
9292 Date: Wed Jan 28 09:25:31 2009 +0100
9294 mpc8536ds.c: include sata.h to for needed function prototypes
9296 Signed-off-by: Wolfgang Denk <wd@denx.de>
9298 commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
9299 Author: Peter Tyser <ptyser@xes-inc.com>
9300 Date: Tue Jan 27 18:03:12 2009 -0600
9302 Command usage cleanup
9304 Remove command name from all command "usage" fields and update
9305 common/command.c to display "name - usage" instead of
9306 just "usage". Also remove newlines from command usage fields.
9308 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9310 commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
9311 Author: Peter Tyser <ptyser@xes-inc.com>
9312 Date: Tue Jan 27 18:03:11 2009 -0600
9314 amcc: Clean up command usage output
9316 Update taihu and taishan commands to use cmd_usage() function
9317 to display usage messages.
9319 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9321 commit 62c3ae7c6ef215b1afa614abdf61acf077752207
9322 Author: Peter Tyser <ptyser@xes-inc.com>
9323 Date: Tue Jan 27 18:03:10 2009 -0600
9325 Standardize command usage messages with cmd_usage()
9327 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9329 commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
9330 Author: Peter Tyser <ptyser@xes-inc.com>
9331 Date: Tue Jan 27 18:03:09 2009 -0600
9333 pcs440ep: Clean up led command definition
9335 The pcs440ep's led command usage formatting is non-standard. It
9336 was made standard in preparation for larger command usage updates.
9338 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9340 commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
9341 Author: Peter Tyser <ptyser@xes-inc.com>
9342 Date: Tue Jan 27 18:03:08 2009 -0600
9344 Clean up diufb command definitions
9346 The diufb command usage formatting is non-standard. It was
9347 made standard in preparation for larger command usage updates.
9349 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9351 commit 6450a8485836fc80615ae6de6a864c33369b44f5
9352 Author: Wolfgang Denk <wd@denx.de>
9353 Date: Wed Jan 28 00:29:26 2009 +0100
9355 Update CHANGELOG, tiny coding style cleanup.
9357 Signed-off-by: Wolfgang Denk <wd@denx.de>
9359 commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
9360 Author: Mike Frysinger <vapier@gentoo.org>
9361 Date: Tue Jan 27 16:12:21 2009 -0500
9363 SATA: do not auto-initialize during boot
9365 Rather than have the board code initialize SATA automatically during boot,
9366 make the user manually run "sata init". This brings the SATA subsystem in
9367 line with common U-Boot policy.
9369 Rather than having a dedicated weak function "is_sata_supported", people
9370 can override sata_initialize() to do their weird board stuff. Then they
9371 can call the actual __sata_initialize().
9373 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9375 commit 50970839712dda35399e2fa83fe818df9354d618
9376 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
9377 Date: Mon Jan 26 08:45:14 2009 -0500
9379 part_efi: Fix partition size calculation due to inclusive ending LBA.
9381 The ending LBA is inclusive. Hence, the partition size should be
9382 ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
9384 This is confirmed against the results from the parted tool.
9385 (e.g. use parted /dev/sda -s unit S print) and observe the size.
9387 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
9389 commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
9390 Author: Tomasz Figa <tomasz.figa@gmail.com>
9391 Date: Tue Dec 30 18:35:57 2008 +0100
9393 jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
9395 This patch fixes a bug (?) introduced after inclusion of the new
9398 When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
9399 fill in part->sector_size (keeping it as 0), but a correct value is
9400 needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
9401 to be in the same place of the memory, what obviously means
9402 impossibility to use the JFFS2 partition.
9404 This problem is fixed in this patch by including sector size
9405 calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.
9407 Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>
9409 commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
9410 Author: Mike Frysinger <vapier@gentoo.org>
9411 Date: Tue Dec 30 02:59:25 2008 -0500
9413 saveenv: standardize enablement
9415 Rather than special casing each environment type for enabling the saveenv
9416 command, have them all behave the same. This avoids bitrot as new env
9417 sources are added/removed.
9419 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9421 commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
9422 Author: Andrew Dyer <adyer@righthandtech.com>
9423 Date: Mon Dec 29 17:36:01 2008 -0600
9425 soft_i2c.c add option for repeated start in i2c_read()
9427 This patch adds a #define to optionally change the behaviour of
9428 i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
9429 stop-start between sending the device address pointer write and
9430 reading back the data. The current behaviour is retained as the
9433 While most devices will work either way, I have a smart battery(*)
9434 that requires repeated start, and someone at some point found a
9435 device that required a stop-start.
9437 (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf
9439 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
9441 commit 3429071700963ca2f944c51d695a7481af0cee33
9442 Author: Wolfgang Denk <wd@denx.de>
9443 Date: Tue Jan 27 22:07:14 2009 +0100
9445 {delta,zylonite}/lowlevel_init.S: fix typo
9447 Commit 9d803d8c mistakenly changed some constants
9448 from 0x300 into 300 - this patch fixes it.
9450 Pointed out by Tom Evans <tom@ceos.com.au>, see
9451 http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
9454 Signed-off-by: Wolfgang Denk <wd@denx.de>
9456 commit 1bc434373013af241835c14011ac3f291dccbf53
9457 Author: Stefan Althoefer <stefan.althoefer@web.de>
9458 Date: Sat Dec 20 19:40:41 2008 +0100
9460 drivers/net/e1000.c: missing terminator for supported devices
9462 Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
9464 commit 65f7d41031a70b1649b35020995c505edca91533
9465 Author: Wolfgang Denk <wd@denx.de>
9466 Date: Tue Jan 27 21:36:28 2009 +0100
9468 fat.c: fix warning: array subscript is above array bounds
9470 Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.
9472 Signed-off-by: Wolfgang Denk <wd@denx.de>
9474 commit 107b801cf3fe39612d69d70581ebc3bf5e215554
9475 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9476 Date: Fri Jan 2 15:11:41 2009 +0100
9478 Fix gunzip in case of insufficient output buffer
9480 U-Boot's gunzip() function does not handle the return code
9481 of zlib's inflate() function correctly. gunzip() is implemented
9482 to uncompress all input data in one run. So the correct return
9483 code for the good case is Z_STREAM_END. In case of insufficient
9484 output buffer memory inflate returns Z_OK. For gunzip() this
9487 It also makes sense to me to call inflateEnd() also in case
9490 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9492 commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
9493 Author: Stefan Roese <sr@denx.de>
9494 Date: Wed Jan 21 17:25:01 2009 +0100
9496 MIPS: Add VCT board series support (Part 3/3)
9498 Signed-off-by: Stefan Roese <sr@denx.de>
9500 commit ae691e5719c48f1d2826cb72722497d1d162765b
9501 Author: Stefan Roese <sr@denx.de>
9502 Date: Wed Jan 21 17:24:49 2009 +0100
9504 MIPS: Add VCT board series support (Part 2/3)
9506 Signed-off-by: Stefan Roese <sr@denx.de>
9508 commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
9509 Author: Stefan Roese <sr@denx.de>
9510 Date: Wed Jan 21 17:24:39 2009 +0100
9512 MIPS: Add VCT board series support (Part 1/3)
9514 Signed-off-by: Stefan Roese <sr@denx.de>
9516 commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
9517 Author: Stefan Roese <sr@denx.de>
9518 Date: Wed Jan 21 17:20:20 2009 +0100
9520 MIPS: Add flush_dcache_range() and invalidate_dcache_range()
9522 This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
9523 Those functions are needed for the upcoming dcache support for the USB
9524 EHCI driver. I chose this API because those cache handling functions are
9525 already present in the PPC architecture.
9527 Signed-off-by: Stefan Roese <sr@denx.de>
9528 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
9530 commit de832a99414ff06a4b2cdc9f5280b387da039834
9531 Author: Stefan Roese <sr@denx.de>
9532 Date: Mon Jan 26 10:05:20 2009 +0100
9534 nand_spl: Fix compile problem with board_nand_init() prototype
9536 This patch removes the now obsolete and additionally wrongly defined
9537 board_nand_init() prototype from nand_spl/nand_boot.c.
9539 Signed-off-by: Stefan Roese <sr@denx.de>
9540 Signed-off-by: Scott Wood <scottwood@freescale.com>
9542 commit e8eac437189430d8e04a5d254ed92c58bc534a79
9543 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
9544 Date: Wed Jan 14 08:44:26 2009 -0500
9546 CFI: Add geometry reversal for STMicro M29W320ET
9548 Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
9550 Modeled after flash_fixup_amd, this patch handles the geometry reversal
9551 or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
9552 Since I cannot test all STM's chips, the detection is implemented as
9553 narrow as possible for now.
9555 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
9556 Signed-off-by: Stefan Roese <sr@denx.de>
9558 commit 0f8e851e897b535959a0781171910cd97f33c30c
9559 Author: Jens Gehrlein <sew_s@tqs.de>
9560 Date: Tue Dec 16 17:25:55 2008 +0100
9562 CFI: increase performance of function find_sector()
9564 Tested on TQM5200S-BD with Samsung K8P2815UQB
9566 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
9567 Signed-off-by: Stefan Roese <sr@denx.de>
9569 commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
9570 Author: Jens Gehrlein <sew_s@tqs.de>
9571 Date: Tue Dec 16 17:25:54 2008 +0100
9573 CFI: avoid redundant function call in single word programming mode
9575 The function find_sector() doesn't need to be called twice in
9576 the case of AMD command set.
9577 Tested on TQM5200S-BD with Samsung K8P2815UQB.
9579 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
9580 Signed-off-by: Stefan Roese <sr@denx.de>
9582 commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
9583 Author: Stefan Roese <sr@denx.de>
9584 Date: Mon Jan 26 10:15:23 2009 +0100
9586 ppc4xx: Remove compilation warning in gdppc440etc.c
9588 Signed-off-by: Stefan Roese <sr@denx.de>
9590 commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
9591 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9592 Date: Fri Jan 2 12:19:47 2009 +0100
9594 ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
9596 Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
9597 Either they define or undef it. Because it's not used in any source
9598 files this patch removes any references to it.
9600 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9601 Signed-off-by: Stefan Roese <sr@denx.de>
9603 commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
9604 Author: Dirk Eibach <eibach@gdsys.de>
9605 Date: Tue Dec 9 13:12:40 2008 +0100
9607 ppc4xx: Add GDsys PowerPC 440 ETX board support.
9609 Board support for the Guntermann & Drunck PowerPC 440 ETX module.
9610 Based on the AMCC Yosemite board support by Stefan Roese.
9612 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
9613 Signed-off-by: Stefan Roese <sr@denx.de>
9615 commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
9616 Author: Dirk Eibach <eibach@gdsys.de>
9617 Date: Tue Dec 9 11:00:07 2008 +0100
9619 ppc4xx: Improve DDR autodetect
9621 Added support for a second memory bank to DDR autodetection for 440
9623 Made hardcoded values configurable.
9625 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
9626 Signed-off-by: Stefan Roese <sr@denx.de>
9628 commit 71a040f4f556cca4d30f06805d82e717b3ef1020
9629 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9630 Date: Fri Nov 21 12:06:26 2008 +0900
9632 sh: sh7763rdp: Update sh7763rdp config
9634 Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
9636 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9637 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9639 commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
9640 Author: Gary Jennejohn <garyj@denx.de>
9641 Date: Thu Nov 20 12:28:38 2008 +0100
9643 mgcoge make ether_scc.c work with CONFIG_NET_MULTI
9645 This change is needed for mgcoge because it uses two ethernet drivers.
9647 Add a check for the presence of the PIGGY board on mgcoge. Without this
9648 board networking cannot work and the initialization must be aborted.
9650 Only allocate rtx once to prevent DPRAM exhaustion.
9652 Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
9655 Signed-off-by: Gary Jennejohn <garyj@denx.de>
9656 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9658 commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
9659 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9660 Date: Fri Nov 21 12:04:18 2008 +0900
9662 sh: sh_eth: Change new network API
9664 sh_eth used old network API. This patch changed new API.
9666 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9667 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9669 commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
9670 Author: Stefan Roese <sr@denx.de>
9671 Date: Wed Nov 12 13:31:02 2008 +0100
9673 net: smc911x: Make register read/write functions weak
9675 This patch changes the reg_read/_write to smc911x_reg_read/_write
9676 and defines then as weak so that they can be overridden by board
9679 This will be used by the upcoming VCTH board support.
9681 Signed-off-by: Stefan Roese <sr@denx.de>
9682 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9684 commit 8b69b563039989885969d24465c56f8ac4c07c4c
9685 Author: Heiko Schocher <hs@denx.de>
9686 Date: Thu Nov 20 09:57:14 2008 +0100
9688 powerpc: net: support for the SMSC LAN8700 PHY
9690 Signed-off-by: Heiko Schocher <hs@denx.de>
9691 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9693 commit d5254f149da9e6cd649d887b042ce577ef3ba78d
9694 Author: Alessandro Rubini <rubini@unipv.it>
9695 Date: Sat Jan 24 18:10:37 2009 +0100
9697 Initial support for Nomadik 8815 development board
9699 The NMDK8815 board is distributed by ST Microelectornics.
9700 Other (proprietary) code must be run to unlock the CPU before
9701 U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.
9703 This is the initial port, with basic infrastructure and
9704 a working serial port.
9706 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
9707 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
9708 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9710 commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
9711 Author: Dirk Behme <dirk.behme@googlemail.com>
9712 Date: Sun Dec 14 09:47:18 2008 +0100
9714 OMAP3: Add I2C support
9718 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9720 commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
9721 Author: Dirk Behme <dirk.behme@googlemail.com>
9722 Date: Sun Dec 14 09:47:17 2008 +0100
9724 OMAP3: Add MMC support
9728 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9730 commit 12201a13547ec22ddcdae278e74465e54a3be60c
9731 Author: Dirk Behme <dirk.behme@googlemail.com>
9732 Date: Sun Dec 14 09:47:16 2008 +0100
9734 OMAP3: Add NAND support
9738 Signed-off-by: Nishanth Menon <nm@ti.com>
9739 Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
9740 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9742 commit 91eee546737ae21d930af479530997174c342b13
9743 Author: Dirk Behme <dirk.behme@googlemail.com>
9744 Date: Sun Dec 14 09:47:15 2008 +0100
9746 OMAP3: Add common board, interrupt and system info
9748 Add common board, interrupt and system info code.
9750 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9752 commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
9753 Author: Dirk Behme <dirk.behme@googlemail.com>
9754 Date: Sun Dec 14 09:47:14 2008 +0100
9756 OMAP3: Add common clock, memory and low level code
9758 Add common clock, memory and low level code
9760 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9762 commit 0b02b184003e6a5023e05d5f31de54db279b1431
9763 Author: Dirk Behme <dirk.behme@googlemail.com>
9764 Date: Sun Dec 14 09:47:13 2008 +0100
9766 OMAP3: Add common cpu and start code
9768 Add common cpu and start code.
9770 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9772 commit a8b6450546cd507d331b8fde384791d84bde5651
9773 Author: Dirk Behme <dirk.behme@googlemail.com>
9774 Date: Sun Dec 14 09:47:12 2008 +0100
9776 OMAP3: Add OMAP3, memory and function prototype headers
9778 Add OMAP3, memory and function prototype header files for OMAP3.
9780 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9782 commit 2c803210a464abbac35752ca1c737514360b4c32
9783 Author: Dirk Behme <dirk.behme@googlemail.com>
9784 Date: Sun Dec 14 09:47:11 2008 +0100
9786 OMAP3: Add pin mux, clock and cpu headers
9788 Add pin mux, clock and cpu header files for OMAP3.
9790 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
9792 commit 685533646f4ff17a84ec9265cabb60af325b6e1f
9793 Author: Maxim Artamonov <scn1874@yandex.ru>
9794 Date: Wed Dec 3 05:38:17 2008 +0300
9796 bugfix for i.mx31 CCM_UPCTL reg
9798 Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
9800 commit 24113a44ed5cd3257a0237c3961e121812fca6db
9801 Author: Mike Frysinger <vapier@gentoo.org>
9802 Date: Tue Dec 30 03:15:38 2008 -0500
9804 easylogo: add optional gzip support
9806 Some images can be quite large, so add an option to compress the
9807 image data with gzip in the U-Boot image. Then at runtime, the
9808 board can decompress it with the normal zlib functions.
9810 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9812 commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
9813 Author: Bryan Wu <bryan.wu@analog.com>
9814 Date: Fri Jan 2 20:47:45 2009 -0500
9816 fat: fix unaligned errors
9818 A couple of buffers in the fat code are declared as an array of bytes.
9819 But it is then cast up to a structure with 16bit and 32bit members.
9820 Since GCC assumes structure alignment here, we have to force the
9821 buffers to be aligned according to the structure usage.
9823 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
9824 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9826 commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
9827 Author: Brad Bozarth <bflinux@yumbrad.com>
9828 Date: Thu Jan 1 22:45:47 2009 -0500
9830 spi flash: fix crash due to spi flash miscommunication
9832 Higher spi flash layers expect to be given back a pointer that was
9833 malloced so that it can free the result, but the lower layers return
9834 a pointer that is in the middle of the malloced memory. Reorder the
9835 members of the lower spi structures so that things work out.
9837 Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
9838 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9839 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9841 commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
9842 Author: Yuri Tikhonov <yur@emcraft.com>
9843 Date: Sat Dec 20 14:54:21 2008 +0300
9845 FPU POST: fix warnings when building with 2.18 binutils
9847 When compile u-boot with the 2.18 binutils the following
9848 warning messages for each object file in post/lib_ppc/fpu/ is
9849 produced at the linking stage:
9851 post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
9854 This is because of the fact that, in general, the soft-float and
9855 hard-float ABIs are incompatible; the 2.18 binutils do checking
9856 of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
9857 produce the worning like above if these are not compatible.
9859 The incompatibility of ABIs is concerned only the float values:
9860 e.g. the soft-float ABI assumes the float argument passing in the
9861 pair of rX registers, and the hard-float ABI assumes passing of
9862 the float argument in the fX register. When we don't pass the float
9863 arguments between the functions compiled with different floatness,
9864 then such an application will work correctly.
9865 This is the case for the FPU POST: u-boot (compiled with soft-float)
9866 doesn't pass to (and doesn't get from) the FPU POST functions any
9867 floats; there are no functions exported from the post/lib_ppc/fpu/
9868 objects which would work with float parameters/returns too. So, we
9869 can reassure the linker not to worry about the difference in ABI
9870 attributes of linking files just by setting the 'soft-float'
9871 attribute for the objects in post/lib_ppc/fpu. And this patch does
9874 Also, to avoid passing both soft- and hard-float options in CFLAGS
9875 when compiling the files from post/lib_ppc/fpu (which is OK, but
9876 looks rather dirty) this patch removes the soft-float string from
9877 CFLAGS in post/lib_ppc/fpu/Makefile.
9879 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9881 commit a7c9310457e85b4598abe5b304108edf11332e2f
9882 Author: Peter Tyser <ptyser@xes-inc.com>
9883 Date: Wed Dec 17 16:36:22 2008 -0600
9885 Add support for Maxim's DS4510 I2C device
9887 Initial support for the DS4510, a CPU supervisor with
9888 integrated EEPROM, SRAM, and 4 programmable non-volatile
9889 GPIO pins. The CONFIG_DS4510 define enables support
9890 for the device while the CONFIG_CMD_DS4510 define
9891 enables the ds4510 command. The additional
9892 CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
9893 CONFIG_DS4510_RST defines add additional sub-commands
9894 to the ds4510 command when defined.
9896 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9898 commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
9899 Author: Dirk Eibach <eibach@gdsys.de>
9900 Date: Tue Dec 16 14:51:56 2008 +0100
9902 common: Iteration limit for memory test.
9904 The iteration limit is passed to mtest as a fourth parameter:
9905 [start [end [pattern [iterations]]]]
9906 If no fourth parameter is supplied, there is no iteration limit and the
9907 test will loop forever.
9909 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
9911 commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
9912 Author: Stefan Roese <sr@denx.de>
9913 Date: Mon Dec 15 15:40:12 2008 +0100
9915 serial: Rename driver vcth to vct to support other board variants
9917 Moved driver vcth.c to vct.c to better reflect the VCT board series.
9918 This driver is now used by the VCT platforms:
9924 Signed-off-by: Stefan Roese <sr@denx.de>
9926 commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
9927 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
9928 Date: Fri Dec 12 00:45:27 2008 +0900
9930 nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
9932 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
9934 commit c3284b030b1cd492b4f46c576aea01bef258599d
9935 Author: Peter Korsgaard <jacmet@sunsite.dk>
9936 Date: Wed Dec 10 16:24:16 2008 +0100
9938 common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
9940 Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
9941 similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
9942 !CONFIG_AUTOBOOT_KEYED case.
9944 Do this by reversing the loop so we do at least one iteration before
9945 checking for timeout.
9947 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
9949 commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
9950 Author: Niklaus Giger <niklaus.giger@netstal.com>
9951 Date: Mon Dec 8 17:24:08 2008 +0100
9953 Added legacy flash ST Micro M29W040B
9955 commit 626d07348e5f9f302f4ea182161a89f7362a0488
9956 Author: Graeme Russ <graeme.russ@gmail.com>
9957 Date: Mon Dec 8 20:04:51 2008 +1100
9959 Fixed off-by-one errors in lib_m68k/interrupts.c
9961 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9963 commit a5989c42ae5e295f274a795c426c47819bbdbfda
9964 Author: Graeme Russ <graeme.russ@gmail.com>
9965 Date: Sun Dec 7 10:29:05 2008 +1100
9967 Removed all references to CONFIG_SYS_RESET_GENERIC
9969 Generic i386 reset - #define made redundant by weak function
9971 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9973 commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
9974 Author: Graeme Russ <graeme.russ@gmail.com>
9975 Date: Sun Dec 7 10:29:04 2008 +1100
9977 Remove #ifdef CONFIG_SC520 in source code
9979 CONFIG_SC520 is now used for conditional compile
9981 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9983 commit ead056bc206f6b7ee6dc98766678b64635ea20b8
9984 Author: Graeme Russ <graeme.russ@gmail.com>
9985 Date: Sun Dec 7 10:29:03 2008 +1100
9987 Added MMCR reset functionality
9989 Reset function specific to AMD SC520 microcontroller - Is more of a
9990 'hard reset' that the triple fault.
9992 Requires CONFIG_SYS_RESET_SC520 to be defined in config
9994 I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
9995 but ld requires that a object file in a library arhive MUST contain
9996 at least one function which does not override a weak function (and is
9997 called from outside the object file) in order for that object file to
9998 be extracted from the archive. This would be the only function on the
9999 new file, and hence, will never get linked in.
10001 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
10003 commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
10004 Author: Graeme Russ <graeme.russ@gmail.com>
10005 Date: Sun Dec 7 10:29:02 2008 +1100
10007 Moved generic (triple fault) reset code
10009 Moved from interrupts.c to cpu.c and made into a weak function to
10010 allow vendor specific override
10012 Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
10013 added to the vendor specific code without the need to remember to
10014 #undef usage of the generic method and if you forget to include your
10015 custom reset method, you will always get the default.
10017 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
10019 commit 9933d609020c297788f53f334c8465fa7a99b10c
10020 Author: Graeme Russ <graeme.russ@gmail.com>
10021 Date: Sun Dec 7 10:29:01 2008 +1100
10023 Moved definition of set_vector() to new header file
10025 This allows for future tidy ups and functionality that will require
10028 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
10030 commit 407976185e0dda2c90e89027121a1071b9c77bfb
10031 Author: Graeme Russ <graeme.russ@gmail.com>
10032 Date: Sun Dec 7 10:29:00 2008 +1100
10034 Moved sc520 specific code into new cpu/i386/sc520 folder
10036 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
10037 Signed-off-by: Wolfgang Denk <wd@denx.de>
10039 commit 85ffbbd51914925a542d8528be7f072e5ab02157
10040 Author: Graeme Russ <graeme.russ@gmail.com>
10041 Date: Sun Dec 7 10:28:58 2008 +1100
10043 Renamed cpu/i386/reset.S to resetvec.S
10045 Brings i386 in line with other CPUs with a reset vector and frees up reset.c
10046 for CPU reset functions
10048 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
10050 commit a3f4c123f569474e80ea012b8db0de46afdb6443
10051 Author: Wolfgang Denk <wd@denx.de>
10052 Date: Sat Jan 24 01:01:49 2009 +0100
10054 Makefile: keep lists sorted.
10056 Signed-off-by: Wolfgang Denk <wd@denx.de>
10058 commit c620c01e96814558470698ed5cab1bf2f504d1b5
10059 Author: Graeme Russ <graeme.russ@gmail.com>
10060 Date: Sun Dec 7 10:28:57 2008 +1100
10062 Added initial eNET board support
10064 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
10066 commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
10067 Author: Gary Jennejohn <garyj@denx.de>
10068 Date: Thu Nov 20 11:37:26 2008 +0100
10070 POWERPC 82xx: add the SCC as an HDLC controller
10072 Right now this is only used by keymile.
10074 Signed-off-by: Gary Jennejohn <garyj@denx.de>
10076 commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
10077 Author: Heiko Schocher <hs@denx.de>
10078 Date: Thu Nov 20 09:59:09 2008 +0100
10080 powerpc, keymile boards: extract identical config options
10082 This patch extracts the identical config options for the
10083 keymile boards mgcoge, mgsuvd and kmeter1 in a new
10084 common config file keymile-common.h.
10086 Signed-off-by: Heiko Schocher <hs@denx.de>
10088 commit 210c8c00aad3328145204adab434bb7d70b06b75
10089 Author: Heiko Schocher <hs@denx.de>
10090 Date: Fri Nov 21 08:29:40 2008 +0100
10092 powerpc: keymile: Add a check for the PIGGY debug board
10094 Check the presence of the PIGGY on the keymile boards mgcoge,
10095 mgsuvd and kmeter1. If the PIGGY is not present, dont register
10096 this Ethernet device.
10098 Signed-off-by: Heiko Schocher <hs@denx.de>
10099 Acked-by: Ben Warren <biggerbadderben@gmail.com>
10101 commit de0443614af4d16675ab436665aeb11ddc9f7214
10102 Author: Heiko Schocher <hs@denx.de>
10103 Date: Thu Nov 20 09:57:47 2008 +0100
10105 powerpc: 83xx: add support for the kmeter1 board
10107 This patch adds support for the kmeter1 board from Keymile,
10108 based on a Freescale MPC8360 CPU.
10110 - serial console on UART 1
10113 - Ethernet RMII Mode over UCC4
10116 Signed-off-by: Heiko Schocher <hs@denx.de>
10118 commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
10119 Author: Sergei Poselenov <sposelenov@emcraft.com>
10120 Date: Tue Nov 4 13:51:18 2008 +0100
10122 Add a do_div() wrapper macro, lldiv().
10124 Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
10125 the dividend and returns the result of division, so it is useful
10126 in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"
10128 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10130 commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
10131 Author: Kumar Gala <galak@kernel.crashing.org>
10132 Date: Fri Jan 23 14:22:14 2009 -0600
10134 85xx: Add a 36-bit physical configuration for MPC8572DS
10136 We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
10137 to allow for larger memory sizes.
10139 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10141 commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
10142 Author: Kumar Gala <galak@kernel.crashing.org>
10143 Date: Fri Jan 23 14:22:13 2009 -0600
10145 85xx: Handle eLBC difference w/36-bit physical
10147 The eLBC only handles 32-bit physical address in systems with 36-bit
10148 physical. The previos generation of LBC handled 34-bit physical
10149 address in 36-bit systems. Added a new CONFIG option to convey
10150 the difference between the LBC and eLBC.
10152 Also added defines for XAM bits used in LBC for the extended 34-bit
10155 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10157 commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
10158 Author: Kumar Gala <galak@kernel.crashing.org>
10159 Date: Fri Jan 23 14:22:12 2009 -0600
10161 85xx: Use BR_ADDR macro for NAND chipselects
10163 Use the new BR_ADDR macro to properly setup the address field of the
10164 localbus chipselects used by NAND.
10166 This allows us to deal with 36-bit phys on these boards in the future.
10168 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10170 commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
10171 Author: Haiying Wang <Haiying.Wang@freescale.com>
10172 Date: Thu Jan 15 11:58:35 2009 -0500
10174 Add secondary CPUs processor frequency for e500 core
10176 This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
10177 and prints each CPU's frequency separately. It also fixes up each CPU's
10178 frequency in "clock-frequency" of fdt blob.
10180 Signed-off-by: James Yang <James.Yang@freescale.com>
10181 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10183 commit bf5b1f0c0d28ce062e1d368680632dfb099de692
10184 Author: Dave Liu <daveliu@freescale.com>
10185 Date: Fri Nov 21 16:31:53 2008 +0800
10187 85xx: enable the auto self refresh for wake up ARP
10189 The wake up ARP feature need use the memory to process
10190 wake up packet, we enable auto self refresh to support it.
10192 Signed-off-by: Dave Liu <daveliu@freescale.com>
10193 Acked-by: Andy Fleming <afleming@freescale.com>
10195 commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
10196 Author: Dave Liu <daveliu@freescale.com>
10197 Date: Fri Nov 21 16:31:43 2008 +0800
10199 fsl-ddr: use the 1T timing as default configuration
10201 For light loaded system, we use the 1T timing to gain better
10202 memory performance, but for some heavily loaded system,
10203 you have to add the 2T timing options to board files.
10205 Signed-off-by: Dave Liu <daveliu@freescale.com>
10206 Acked-by: Andy Fleming <afleming@freescale.com>
10208 commit 22cca7e1cd54590e967c73558b07ffbdccd39504
10209 Author: Dave Liu <daveliu@freescale.com>
10210 Date: Fri Nov 21 16:31:35 2008 +0800
10212 fsl-ddr: make the self refresh idle threshold configurable
10214 Some 85xx processors have the advanced power management feature,
10215 such as wake up ARP, that needs enable the automatic self refresh.
10217 If the DDR controller pass the SR_IT (self refresh idle threshold)
10218 idle cycles, it will automatically enter self refresh. However,
10219 anytime one transaction is issued to the DDR controller, it will
10220 reset the counter and exit self refresh state.
10222 Signed-off-by: Dave Liu <daveliu@freescale.com>
10223 Acked-by: Andy Fleming <afleming@freescale.com>
10225 commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
10226 Author: Dave Liu <daveliu@freescale.com>
10227 Date: Fri Nov 21 16:31:29 2008 +0800
10229 fsl-ddr: clean up the ddr code for DDR3 controller
10231 - The DDR3 controller is expanding the bits for timing config
10232 - Add the DDR3 32-bit bus mode support
10234 Signed-off-by: Dave Liu <daveliu@freescale.com>
10235 Acked-by: Andy Fleming <afleming@freescale.com>
10237 commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
10238 Author: Dave Liu <daveliu@freescale.com>
10239 Date: Fri Nov 21 16:31:22 2008 +0800
10241 fsl-ddr: update the bit mask for DDR3 controller
10243 According to the latest 8572 UM, the DDR3 controller
10244 is expanding the bit mask, and we use the extend ACTTOPRE
10245 mode when tRAS more than 19 MCLK.
10247 Signed-off-by: Dave Liu <daveliu@freescale.com>
10249 commit aca5f018a8386b85469482ed9867e3e29a2437d0
10250 Author: Kumar Gala <galak@kernel.crashing.org>
10251 Date: Tue Dec 2 16:08:40 2008 -0600
10253 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
10255 Introduce a new define to seperate out the virtual address that PCI
10256 IO space is at from the physical address. In most situations these are
10257 mapped 1:1. However any code accessing the bus should use VIRT.
10259 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10260 Acked-by: Andy Fleming <afleming@freescale.com>
10262 commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
10263 Author: Kumar Gala <galak@kernel.crashing.org>
10264 Date: Tue Dec 2 16:08:39 2008 -0600
10266 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
10268 Introduce a new define to seperate out the virtual address that PCI
10269 memory is at from the physical address. In most situations these are
10270 mapped 1:1. However any code accessing the bus should use VIRT.
10272 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10273 Acked-by: Andy Fleming <afleming@freescale.com>
10275 commit a6e04c344ad1eefd47a75484441b385da815b8df
10276 Author: Kumar Gala <galak@kernel.crashing.org>
10277 Date: Tue Dec 2 16:08:38 2008 -0600
10279 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
10281 Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
10282 of TLBs. This is what we should have always been using from the start.
10284 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10285 Acked-by: Andy Fleming <afleming@freescale.com>
10287 commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
10288 Author: Kumar Gala <galak@kernel.crashing.org>
10289 Date: Tue Dec 2 16:08:37 2008 -0600
10291 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
10293 Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
10294 of _IO_BASE so we are more explicit.
10296 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10298 commit 10795f42cb94e71bcb262b615084f69dd886399a
10299 Author: Kumar Gala <galak@kernel.crashing.org>
10300 Date: Tue Dec 2 16:08:36 2008 -0600
10302 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
10304 Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
10305 of _MEM_BASE so we are more explicit.
10307 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10308 Acked-by: Andy Fleming <afleming@freescale.com>
10310 commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
10311 Author: Kumar Gala <galak@kernel.crashing.org>
10312 Date: Tue Dec 2 14:19:34 2008 -0600
10314 85xx: separate FLASH BASE virtual from physical address
10316 Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
10317 maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.
10319 This allows us to deal with 36-bit phys on these boards in the future.
10321 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10322 Acked-by: Andy Fleming <afleming@freescale.com>
10324 commit 52b565f5ad23b682489055b187767d8bf1c2e444
10325 Author: Kumar Gala <galak@kernel.crashing.org>
10326 Date: Tue Dec 2 14:19:33 2008 -0600
10328 85xx: separate PIXIS virtual from physical address
10330 Added a PIXIS_BASE_PHYS for use as the physical address and maintain
10331 PIXIS_BASE as the virtual address of the PIXIS fpga registers.
10333 This allows us to deal with 36-bit phys on these boards in the future.
10335 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10336 Acked-by: Andy Fleming <afleming@freescale.com>
10338 commit 30837e5b21d5a742983581ab9ee3fac085311d19
10339 Author: Haiying Wang <Haiying.Wang@freescale.com>
10340 Date: Tue Nov 11 08:52:09 2008 -0500
10342 Add README file for MPC8572DS board
10344 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10345 Acked-by: Andy Fleming <afleming@freescale.com>
10347 commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
10348 Author: Mike Frysinger <vapier@gentoo.org>
10349 Date: Mon Oct 20 16:15:04 2008 -0400
10351 Blackfin: use common strmhz() in system output
10353 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10355 commit 5bb907a4925397789c90d074f4f7e92ce6b39402
10356 Author: Ron Madrid <ron_madrid@sbcglobal.net>
10357 Date: Thu Jan 22 15:05:24 2009 -0800
10359 mpc83xx: New board support for SIMPC8313
10361 This patch will create a new board, SIMPC8313, from Sheldon Instruments. This
10362 board boots from NAND devices and is configureable for either large or small
10363 page devices. The board supports non-soldered DDR2, one ethernet port, a
10364 Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected
10365 to the eLBC providing glue logic to a TMS320C67xx DSP.
10367 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
10368 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10370 commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
10371 Author: Mike Frysinger <vapier@gentoo.org>
10372 Date: Sun Jan 18 19:46:06 2009 -0500
10374 nand: fixup printf modifiers to match types used
10376 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10377 Signed-off-by: Scott Wood <scottwood@freescale.com>
10379 commit 389e6620e2271096df3316917528003627db4021
10380 Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
10381 Date: Tue Jan 20 16:57:55 2009 +0100
10383 nand read.jffs2 (nand_legacy) in common/cmd_nand.c
10385 Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
10386 With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
10387 "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
10388 tested before ".jffs2s" and only the first two characters are compared.
10391 Test for ".jffs2s" first and compare the first 7 characters.
10393 Signed-off-by: Scott Wood <scottwood@freescale.com>
10395 commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
10396 Author: Wolfgang Grandegger <wg@grandegger.com>
10397 Date: Fri Jan 16 18:55:54 2009 +0100
10399 NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
10401 This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
10402 changes the default from 8 to 1 for the legacy and the new MTD
10403 NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
10404 in the board config files because none of the boards use multi
10405 chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
10408 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
10410 but that's bogus and did not work anyhow.
10412 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10413 Signed-off-by: Scott Wood <scottwood@freescale.com>
10415 commit c70564e6b1bd08f3230182392238907f3531a87e
10416 Author: Dave Liu <daveliu@freescale.com>
10417 Date: Tue Dec 2 11:48:51 2008 +0800
10419 NAND: Fix cache and memory inconsistency issue
10421 We load the secondary stage u-boot image from NAND to
10422 system memory by nand_load, but we did not flush d-cache
10423 to memory, nor invalidate i-cache before we jump to RAM.
10424 When the system has cache enabled and the TLB/page attribute
10425 of system memory is cacheable, it will cause issues.
10427 - 83xx family is using the d-cache lock, so all of d-cache
10428 access is cache-inhibited. so you can't see the issue.
10429 - 85xx family is using d-cache, i-cache enable, partial
10430 cache lock. you will see the issue.
10432 This patch fixes the cache issue.
10434 Signed-off-by: Dave Liu <daveliu@freescale.com>
10435 Signed-off-by: Scott Wood <scottwood@freescale.com>
10437 commit 50657c273278f74378e1ac39b41d612b92fdffa0
10438 Author: Nishanth Menon <menon.nishanth@gmail.com>
10439 Date: Sat Dec 13 09:43:06 2008 -0600
10441 NAND: Enable nand lock, unlock feature
10443 Enable nand lock, unlock and status of lock feature.
10444 Not every device and platform requires this, hence,
10445 it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK
10447 Nand unlock and status operate on block boundary instead
10448 of page boundary. Details in:
10449 http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT
10451 Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
10452 Includes preliminary suggestions from Scott Wood
10454 Signed-off-by: Nishanth Menon <nm@ti.com>
10455 Signed-off-by: Scott Wood <scottwood@freescale.com>
10457 commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
10458 Author: Mike Frysinger <vapier@gentoo.org>
10459 Date: Sat Dec 6 02:40:55 2008 -0500
10461 NAND: move board_nand_init to nand.h
10463 Rather than putting the function prototype for board_nand_init() in the one
10464 place where it gets called, put it into nand.h so that every place that also
10465 defines it gets the prototype. Otherwise, errors can go silently unnoticed
10466 such as using the wrong return value (void rather than int) when defining
10469 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10470 Signed-off-by: Scott Wood <scottwood@freescale.com>
10472 commit 1ae39862044ebb1e682234b51f94421e3f871d6a
10473 Author: Stefan Roese <sr@denx.de>
10474 Date: Tue Dec 2 11:06:47 2008 +0100
10476 OneNAND: Additional sync with 2.6.27
10478 - Add subpage write support
10479 - Add onenand_oob_64/32 ecclayout
10481 This has been missing and without it UBI has some incompatibilies issues
10482 with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
10483 placed differently (2048 instead of 512) without this fix.
10485 Signed-off-by: Stefan Roese <sr@denx.de>
10486 Signed-off-by: Scott Wood <scottwood@freescale.com>
10488 commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
10489 Author: Kyungmin Park <kmpark@infradead.org>
10490 Date: Thu Nov 13 15:14:33 2008 +0900
10492 Add markbad function
10494 Add missing markbad function
10495 If not, it's hang when it entered the mtd->mark_bad().
10497 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10499 commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
10500 Author: Stefan Roese <sr@denx.de>
10501 Date: Wed Nov 12 13:47:24 2008 +0100
10503 OneNAND: Bad block aware read/write command support
10505 Update OneNAND command to support bad block awareness.
10506 Also change the OneNAND command style to better match the
10509 Signed-off-by: Stefan Roese <sr@denx.de>
10510 Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
10512 commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
10513 Author: Stefan Roese <sr@denx.de>
10514 Date: Tue Nov 11 10:29:09 2008 +0100
10516 OneNAND: Save version_id in onenand_chip struct
10518 The version (ver_id) was not stored in the onenand_chip structure and
10519 because of this the continuous locking scheme could be enabled on some
10522 Signed-off-by: Stefan Roese <sr@denx.de>
10524 commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
10525 Author: Stefan Roese <sr@denx.de>
10526 Date: Tue Nov 11 10:28:53 2008 +0100
10528 OneNAND: Fix compiler warnings
10530 Signed-off-by: Stefan Roese <sr@denx.de>
10532 commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
10533 Author: Dave Liu <daveliu@freescale.com>
10534 Date: Tue Nov 4 14:55:06 2008 +0800
10536 mpc83xx: enable eLBC NAND support for MPC8315ERDB board
10538 Signed-off-by: Dave Liu <daveliu@freescale.com>
10540 commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
10541 Author: Kyungmin Park <kmpark@infradead.org>
10542 Date: Tue Nov 4 09:24:07 2008 +0900
10546 Sync with OneNAND kernel codes
10548 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10550 commit e7f325be9edeb84bb457301776bbac1f7257dafc
10551 Author: Michal Simek <monstr@monstr.eu>
10552 Date: Mon Jan 5 13:35:31 2009 +0100
10554 microblaze: Use cache functions (especially cache status)
10555 in systems which are configured without flash
10557 commit e9b737deb2c30125362d20e24170617476026e94
10558 Author: Michal Simek <monstr@monstr.eu>
10559 Date: Mon Jan 5 13:29:32 2009 +0100
10561 microblaze: Add cache flush
10563 commit b4f8dda35bfad447b4106828232705b2e878d168
10564 Author: Michal Simek <monstr@monstr.eu>
10565 Date: Mon Jan 5 13:28:40 2009 +0100
10567 microblaze: Add bootup messages to board.c
10569 commit 330e55459bc9983341da6c1d5c7fe00a664436fe
10570 Author: Michal Simek <monstr@monstr.eu>
10571 Date: Fri Dec 19 13:25:55 2008 +0100
10573 microblaze: Change microblaze-generic config file
10575 Signed-off-by: Michal Simek <monstr@monstr.eu>
10577 commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
10578 Author: Michal Simek <monstr@monstr.eu>
10579 Date: Fri Dec 19 13:14:05 2008 +0100
10581 microblaze: Rename ml401 to microblaze-generic
10583 Signed-off-by: Michal Simek <monstr@monstr.eu>
10585 commit 6677876181cc8772bca8a372479a500d160f3993
10586 Author: Scott Wood <scottwood@freescale.com>
10587 Date: Tue Jan 20 11:56:11 2009 -0600
10589 83xx: Use the proper sequence for updating IMMR.
10591 This ensures that subsequent accesses properly hit the new window.
10593 The dcbi during the NAND loop was accidentally working around this;
10594 it's no longer necessary, as the cache is not enabled.
10596 Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
10597 Signed-off-by: Scott Wood <scottwood@freescale.com>
10598 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10600 commit 8b34557c546e5e9f34ebf83c93413dad973d93df
10601 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10602 Date: Thu Jan 8 04:26:19 2009 +0300
10604 mpc83xx: Add PCI-E support for MPC837XEMDS boards
10606 MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
10607 provides two PCI-E (x2) ports. Though, only one port can be used in x2
10608 mode. Two ports can function simultaneously in x1 mode.
10610 PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
10612 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10613 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10615 commit 8f11e34b31a7be124a3239653f33af9510502045
10616 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10617 Date: Thu Jan 8 04:26:17 2009 +0300
10619 mpc83xx: Add PCI-E support for MPC8315ERDB boards
10621 MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
10624 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10625 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10627 commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
10628 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10629 Date: Thu Jan 8 04:26:12 2009 +0300
10631 mpc83xx: Add support for MPC83xx PCI-E controllers
10633 This patch adds support for MPC83xx PCI-E controllers in Root Complex
10636 The patch is based on Tony Li and Dave Liu work[1].
10638 Though unlike the original patch, by default we don't register PCI-E
10639 buses for use in U-Boot, we only configure the controllers for future
10640 use in other OSes (Linux). This is done because we don't have enough
10641 of spare BATs to map all the PCI-E regions.
10643 To actually use PCI-E in U-Boot, users should explicitly define
10644 CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
10645 only then U-Boot will able to access PCI-E, but at the cost of disabled
10646 address translation.
10648 [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
10650 Signed-off-by: Tony Li <tony.li@freescale.com>
10651 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10652 Acked-by: Dave Liu <daveliu@freescale.com>
10653 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10655 commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
10656 Author: Ira Snyder <iws@ovro.caltech.edu>
10657 Date: Mon Jan 12 13:33:17 2009 -0800
10659 MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode
10661 When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
10662 not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
10663 "Clocking in PCI Agent Mode".
10665 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
10666 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10668 commit 75f35209f702bb26826855ed8c8e4d108ab5f412
10669 Author: Ira Snyder <iws@ovro.caltech.edu>
10670 Date: Mon Jan 12 13:32:26 2009 -0800
10672 83xx: PCI agent mode fixes for multi-board systems
10674 When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
10675 the boards will lock up the PCI bus by scanning against each other.
10677 The boards lock against each other by trying to access the PCI bus before
10678 clearing their configuration lock bit. Both boards end up in a loop,
10679 sending and receiving "Target Not Ready" messages forever.
10681 When running in PCI agent mode, the scanning now takes place after the
10682 boards have cleared their configuration lock bit.
10684 Also, add a missing declaration to the mpc83xx.h header file, fixing a
10687 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
10688 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10690 commit 455a46915b82896cc2070eb326d075555c2bc580
10691 Author: Ron Madrid <ron_madrid@sbcglobal.net>
10692 Date: Fri Dec 12 13:12:45 2008 -0800
10694 mpc83xx: Size optimization of start.S
10696 Currently there are in excess of 100 bytes located at the beginning of the image
10697 built by start.S that are not being utilized. This patch moves a few functions
10698 into this part of the image. This will create a greater number of *available*
10699 bytes that can be used by board specific code in NAND builds and will decrease
10700 the size of the assembled code in other builds.
10702 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
10703 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10705 commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
10706 Author: Wolfgang Denk <wd@denx.de>
10707 Date: Wed Jan 21 23:08:12 2009 +0100
10711 Signed-off-by: Wolfgang Denk <wd@denx.de>
10713 commit 635e5f8fc82365e6e9734b3132bc95135a6de679
10714 Author: Wolfgang Denk <wd@denx.de>
10715 Date: Sun Jan 18 21:37:48 2009 +0100
10717 Prepare 2009.01-rc3
10721 Signed-off-by: Wolfgang Denk <wd@denx.de>
10723 commit 4cda437898f7873752f0201757cd33f12196ce87
10724 Author: Mike Frysinger <vapier@gentoo.org>
10725 Date: Sat Jan 17 13:32:42 2009 -0500
10727 build system: treat all Darwin's alike
10729 The x86 based version of Darwin behaves the same quirky way as the powerpc
10730 Darwin, so only check HOSTOS when setting up Darwin workarounds.
10732 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10734 commit c088a108c75db565e07292fd668dfa5491e85bc2
10735 Author: Peter Korsgaard <jacmet@sunsite.dk>
10736 Date: Wed Jan 14 13:52:24 2009 +0100
10738 fdt_resize(): fix actualsize calculations with unaligned blobs
10740 The code in fdt_resize() to extend the fdt size to end on a page boundary
10741 is wrong for fdt's not located at an address aligned on a page boundary.
10742 What's even worse, the code would make actualsize shrink rather than grow
10743 if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
10744 causing fdt_add_mem_rsv to fail.
10746 Fix it by aligning end address (blob + size) to a page boundary instead.
10747 For aligned fdt's this is equivalent to what we had before.
10749 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
10751 commit fadad1573fb16c90025f08a2861d6047d093cba7
10752 Author: Mike Frysinger <vapier@gentoo.org>
10753 Date: Fri Jan 9 04:38:17 2009 -0500
10757 The recvfrom() function takes a socklen_t, not an int.
10759 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10761 commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
10762 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10763 Date: Sun Jan 11 16:35:16 2009 +0100
10765 sh: serial: use readx/writex accessors
10767 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10768 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10770 commit 9e1fa628bdb64745811cdd26c4f953846c076180
10771 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10772 Date: Sun Jan 11 16:35:15 2009 +0100
10774 sh: serial: coding style cleanup
10776 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10777 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10779 commit c9935c992575922b7ef13eec0656ed8665d324e3
10780 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10781 Date: Sun Jan 11 17:48:56 2009 +0900
10783 sh: Fix compile error on lowlevel_init file
10785 lowlevel_init of SH was corrected to use the write/readXX macro.
10786 However, there was a problem that was not able to be compiled partially.
10787 This patch corrected this.
10789 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10791 commit a5b04d00bfeb940c62232972ce644d50b45797f9
10792 Author: Kieran Bingham <kieranbingham@gmail.com>
10793 Date: Tue Dec 30 01:16:03 2008 +0000
10795 sh: Fix up rsk7203 target for out of tree build
10797 Fix up rsk7203 target to build successfully using out-of-tree build.
10799 Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
10800 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10802 commit f7e78f3b74aae9caca2997bad865a72338326c0a
10803 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10804 Date: Sat Dec 20 19:29:49 2008 +0100
10806 sh: use write{8,16,32} in all lowlevel_init
10808 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10809 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10811 commit e4430779623af500de1cee7892c379f07ef59813
10812 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10813 Date: Sat Dec 20 19:29:48 2008 +0100
10815 sh: lowlevel_init coding style cleanup
10817 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10818 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10820 commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
10821 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10822 Date: Sat Dec 20 15:27:45 2008 +0100
10824 sh: update sh2/sh2a timer coding style
10826 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10827 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10829 commit 1e15ff999322e81af4c0c0c548908f38944ba39c
10830 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10831 Date: Sat Dec 20 15:25:22 2008 +0100
10833 sh: update sh timer coding style
10835 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10836 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10838 commit 0e3ece33801e377be67ffa29f083421ad820f28b
10839 Author: Wolfgang Denk <wd@denx.de>
10840 Date: Wed Jan 14 23:26:05 2009 +0100
10842 Prepare 2009.01-rc2
10846 Signed-off-by: Wolfgang Denk <wd@denx.de>
10848 commit e92c9a860e44c14513c8909ce4299e253a775eeb
10849 Author: Wolfgang Denk <wd@denx.de>
10850 Date: Wed Jan 14 22:35:30 2009 +0100
10852 cpu/mpc824x/Makefile: fix warning with parallel builds
10854 Parallel builds would occasionally issue this build warning:
10856 ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
10858 Use "ln -sf" as quick work around for the issue.
10860 Signed-off-by: Wolfgang Denk <wd@denx.de>
10862 commit 3ba605d4beec649438539e7df97b5fedb26592fb
10863 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10864 Date: Fri Jan 2 12:18:49 2009 +0100
10866 ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
10868 This patch adds esd's loadpci BSP command to CPCI4052 and
10869 CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
10871 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10872 Signed-off-by: Stefan Roese <sr@denx.de>
10874 commit 600fe46fb3dab7f07604f9009904f31584415114
10875 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10876 Date: Fri Jan 2 12:18:12 2009 +0100
10878 ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
10880 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10881 Signed-off-by: Stefan Roese <sr@denx.de>
10883 commit f6a1f490d224c600a09137e58d1026d150b8e679
10884 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10885 Date: Fri Jan 2 12:17:36 2009 +0100
10887 ppc4xx: Cleanup CPCI405 board code
10889 This patch cleans up CPCI405 board support:
10891 - unification of spaces in function calls
10894 Use correct io accessors on peripherals.
10896 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10897 Signed-off-by: Stefan Roese <sr@denx.de>
10899 commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
10900 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10901 Date: Fri Jan 2 12:16:35 2009 +0100
10903 ppc4xx: Enable auto RS485 mode on PLU405 boards
10905 This patch turns on the auto RS485 mode in the 2nd external
10906 uart on PLU405 boards. This is a special mode of the used
10907 Exar XR16C2850 uart. Because these boards only have a 485 physical
10908 layer connected it's a good idea to turn it on by default.
10910 Signed-off-by: Matthias Fuchs <mf@esd.eu>
10911 Signed-off-by: Stefan Roese <sr@denx.de>
10913 commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
10914 Author: Haiying Wang <Haiying.Wang@freescale.com>
10915 Date: Tue Jan 13 16:29:28 2009 -0500
10917 Some changes of TLB entry setting for MPC8572DS
10919 - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
10920 all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
10921 can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
10923 - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
10925 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10927 commit 950264317eb9594b2b5ee2fb65206200a1c6007a
10928 Author: Haiying Wang <Haiying.Wang@freescale.com>
10929 Date: Tue Jan 13 16:29:22 2009 -0500
10931 Change DDR tlb start entry to CONFIG param for 85xx
10933 So that we can locate the DDR tlb start entry to the value other than 8. By
10934 default, it is still 8.
10936 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10938 commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
10939 Author: Roy Zang <tie-fei.zang@freescale.com>
10940 Date: Fri Jan 9 16:02:35 2009 +0800
10942 Change PCIE1&2 deciide logic on MPC8544DS board more readable
10944 The IO port selection for MPC8544DS board:
10946 PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
10947 PCIE2 0x4, 0x5, 0x6, 0x7
10949 This patch changes the PCIE12 and PCIE2 logic more readable.
10950 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10952 commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
10953 Author: Roy Zang <tie-fei.zang@freescale.com>
10954 Date: Fri Jan 9 16:01:52 2009 +0800
10956 PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
10958 PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
10960 On MPC8572DS board, PCIE refers to PCIE1.
10961 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10963 commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
10964 Author: Roy Zang <tie-fei.zang@freescale.com>
10965 Date: Fri Jan 9 16:00:55 2009 +0800
10967 Fix IO port selection issue on MPC8544DS and MPC8572DS boards
10969 The IO port selection is not correct on MPC8572DS and MPC8544DS board.
10970 This patch fixes this issue.
10973 PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf
10979 PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
10980 PCIE2 0x4, 0x5, 0x6, 0x7
10982 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10984 commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
10985 Author: Becky Bruce <beckyb@kernel.crashing.org>
10986 Date: Wed Dec 3 22:36:44 2008 -0600
10988 mpc8610hpcd: Fix PCI mapping concepts
10990 Rename _BASE to _BUS, as it's actually a PCI bus address,
10991 separate virtual and physical addresses into _VIRT and _PHYS,
10992 and use each appopriately. This makes the code easier to read
10993 and understand, and facilitates mapping changes going forward.
10995 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
10997 commit 79e436cad3b4a7db88408c3f05175028f30d700d
10998 Author: Becky Bruce <beckyb@kernel.crashing.org>
10999 Date: Wed Dec 3 22:36:26 2008 -0600
11001 sbc8641d: Fix PCI mapping concepts
11003 Rename _BASE to _BUS, as it's actually a PCI bus address,
11004 separate virtual and physical addresses into _VIRT and _PHYS,
11005 and use each appopriately. This makes the code easier to read
11006 and understand, and facilitates mapping changes going forward.
11008 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
11010 commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
11011 Author: Wolfgang Denk <wd@denx.de>
11012 Date: Mon Jan 12 14:50:35 2009 +0100
11014 MPC86xx: fix build warnings
11016 Signed-off-by: Wolfgang Denk <wd@denx.de>
11018 commit 032a1c934ef4dc003281f57302b6e693062c1868
11019 Author: Mike Frysinger <vapier@gentoo.org>
11020 Date: Mon Jan 5 16:09:44 2009 -0500
11022 bf537-stamp/nand: fix board_nand_init prototype
11024 The board_nand_init() function should return an int, not void.
11026 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11028 commit 687f952e4119594ab913be11c90f7f018c2a7a79
11029 Author: Mike Frysinger <vapier@gentoo.org>
11030 Date: Thu Dec 11 07:04:48 2008 -0500
11032 Blackfin: drop CONFIG_SPI handling in board init
11034 The eeprom SPI init functions are duplicated as the common code already
11035 executes these for us.
11037 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11039 commit e7e684b10d73a303902208594c7c3e7e0d753282
11040 Author: Mike Frysinger <vapier@gentoo.org>
11041 Date: Fri Oct 24 17:51:57 2008 -0400
11043 Blackfin: fix out-of-tree building with ldscripts
11045 Many of the Blackfin board linker scripts are preprocessed, so make sure we
11046 output the linker script into the build tree rather than the source tree.
11048 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11050 commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
11051 Author: Mike Frysinger <vapier@gentoo.org>
11052 Date: Fri Oct 24 17:48:54 2008 -0400
11054 Blackfin: fix linker scripts to work with --gc-sections
11056 Make sure all .text sections get pulled in and the entry point is properly
11057 referenced so they don't get discarded when linking with --gc-sections.
11059 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11061 commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
11062 Author: Mike Frysinger <vapier@gentoo.org>
11063 Date: Sat Oct 11 20:45:44 2008 -0400
11065 Blackfin: set proper LDRFLAGS for parallel booting LDRs
11067 In order to boot an LDR out of parallel flash, the ldr utility needs a few
11068 flags to tell it to generate the right header.
11070 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11072 commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
11073 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11074 Date: Tue Jan 6 21:41:59 2009 +0100
11076 at91rm9200: move define from lowlevel_init to header
11078 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11080 commit 8a48686fac2030287765f1970ea046bd5734b733
11081 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11082 Date: Sat Jan 3 17:22:26 2009 +0100
11084 m501sk: move to the common memory setup
11086 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11088 commit d481c80d78f954133c035dae6c7d22de3625795d
11089 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11090 Date: Sat Jan 3 17:22:25 2009 +0100
11092 at91rm9200: rename lowlevel init value to CONFIG_SYS_
11094 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11096 commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
11097 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
11098 Date: Tue Jan 6 21:13:14 2009 +0100
11100 at91: add at91sam9xeek board support
11102 At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
11103 it as another entry for at91sam9260 in the Makefile.
11105 Check documentation at :
11106 http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
11108 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
11109 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11111 commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
11112 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11113 Date: Tue Jan 6 21:15:57 2009 +0100
11115 fix bmp_logo.h make dependencies to allow parallel build
11117 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11119 commit e12d9a8fb48d24176efffccc072b445e60a3afe4
11120 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11121 Date: Sat Jan 3 17:22:24 2009 +0100
11123 at91: Fix Atmel's at91sam9 boards out of tree build
11125 introduced in commit 89a7a87f084c
11127 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11129 commit 0668236bafaa1c11c521652a2facebc74beecbf0
11130 Author: Wolfgang Denk <wd@denx.de>
11131 Date: Tue Dec 30 22:56:11 2008 +0100
11133 README: update mailing list name and hits to patch submission.
11135 Signed-off-by: Wolfgang Denk <wd@denx.de>
11137 commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
11138 Author: Peter Tyser <ptyser@xes-inc.com>
11139 Date: Tue Dec 23 16:32:01 2008 -0600
11141 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
11143 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11145 commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
11146 Author: Peter Tyser <ptyser@xes-inc.com>
11147 Date: Tue Dec 23 16:32:00 2008 -0600
11149 XPedite5200 board support cleanup
11151 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11153 commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
11154 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11155 Date: Tue Dec 2 21:58:04 2008 +0100
11157 usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
11159 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11160 Signed-off-by: Remy Böhmer <linux@bohmer.net>
11162 commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
11163 Author: Trent Piepho <tpiepho@freescale.com>
11164 Date: Wed Dec 3 15:16:37 2008 -0800
11166 mpc8[56]xx: Put localbus clock in sysinfo and gd
11168 Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
11169 and print it out, but don't save it.
11171 This changes where its calculated and stored to be more consistent with the
11172 CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
11174 The localbus frequency is added to sysinfo and calculated when sysinfo is
11175 set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
11177 get_clocks() copies the frequency into the global data, as the other
11178 frequencies are, into a new field that is only enabled for MPC85xx and
11181 checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
11182 from sysinfo, like the other frequencies, instead of calculating it on the
11185 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
11186 Acked-by: Kumar Gala <galak@kernel.crashing.org>
11187 Acked-by: Jon Loeliger <jdl@freescale.com>
11189 commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
11190 Author: Trent Piepho <tpiepho@freescale.com>
11191 Date: Wed Dec 3 15:16:36 2008 -0800
11193 mpc86xx: Double local bus clock divider
11195 The local bus clock divider should be doubled for both 8610 and 8641.
11197 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
11198 Acked-by: Kumar Gala <galak@kernel.crashing.org>
11199 Acked-by: Jon Loeliger <jdl@freescale.com>
11201 commit 446c381e3e16f19857b72ea0d06241267b8b9d58
11202 Author: Trent Piepho <tpiepho@freescale.com>
11203 Date: Wed Dec 3 15:16:35 2008 -0800
11205 mpc8568: Double local bus clock divider
11207 The clock divider for the MPC8568 local bus should be doubled, like the
11208 other newer MPC85xx chips.
11210 Since there are now more chips with a 2x divider than a 1x, and any new
11211 85xx chips will probably be 2x, invert the sense of the #if so that it
11212 lists the 1x chips instead of the 2x ones.
11214 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
11215 Acked-by: Kumar Gala <galak@kernel.crashing.org>
11216 Acked-by: Jon Loeliger <jdl@freescale.com>
11218 commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
11219 Author: Dave Liu <daveliu@freescale.com>
11220 Date: Tue Dec 16 12:09:27 2008 +0800
11222 85xx: Fix the boot window issue
11224 If one custom board is using the 8MB flash, it is set
11225 as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
11226 The current start.S code will be broken at switch_as.
11228 It is because the TLB1[15] is set as 16MB page size,
11229 EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
11231 For the 8MB flash case, the EPN = 0xefxxxxxx,
11232 RPN = 0xffxxxxxx. Assume the virt address of switch_as
11233 is 0xef7ff18c, the real address of the instruction at
11234 switch_as should be 0xff7ff18c. the 0xff7ff18c is out
11235 of the range of the default 8MB boot LAW window
11236 0xff800000 - 0xffffffff.
11238 So when we switch to AS1 address space at switch_as,
11239 the core can't fetch the instruction at switch_as any
11240 more. It will cause broken issue.
11242 Signed-off-by: Dave Liu <daveliu@freescale.com>
11244 commit 58da8890d5fbd074746037722a423de9ac408616
11245 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
11246 Date: Thu Dec 11 15:47:50 2008 -0500
11248 sbc8548: use proper PHY address
11250 The values given for the PHY address were wrong, so the code
11251 read no valid PHY ID, and fell through to the generic PHY
11252 support, which would work on 1000M but would not auto negotiate
11253 down to 100M or 10M.
11255 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
11257 commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
11258 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
11259 Date: Thu Dec 11 15:47:51 2008 -0500
11261 sbc8548: enable command line editing by default.
11263 Lets make things a bit more user friendly. It isn't 1985 anymore.
11265 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
11267 commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
11268 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
11269 Date: Thu Dec 11 15:47:49 2008 -0500
11271 sbc8548: don't enable the 3rd and 4th eTSEC
11273 These interfaces don't have usable connectors on the board, so don't
11274 bother enumerating or configuring them.
11276 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
11278 commit 181a3650113883728927928b3ac81ad6dade4b2c
11279 Author: Haiying Wang <Haiying.Wang@freescale.com>
11280 Date: Wed Dec 3 10:08:19 2008 -0500
11282 Set IVPR to kenrel entry point in second core boot page
11284 Assuming the OSes exception vectors start from the base of kernel address, and
11285 the kernel physical starting address can be relocated to an non-zero address.
11286 This patch enables the second core to have a valid IVPR for debugger before
11287 kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
11288 value for second core which runs kernel at different physical address other
11291 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11293 commit a5d212a263c58cc746481bf1fc878510533ce7d6
11294 Author: Trent Piepho <tpiepho@freescale.com>
11295 Date: Wed Dec 3 15:16:34 2008 -0800
11297 mpc8xxx: LCRR[CLKDIV] is sometimes five bits
11299 On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
11302 In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It
11303 should be safe as the fifth bit was defined as reserved and set to 0.
11305 Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
11307 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
11308 Acked-by: Kumar Gala <galak@kernel.crashing.org>
11309 Acked-by: Jon Loeliger <jdl@freescale.com>
11311 commit 58ec4866ed916c7e422f5107bb27b0822084728e
11312 Author: Trent Piepho <tpiepho@freescale.com>
11313 Date: Wed Dec 3 15:16:38 2008 -0800
11315 mpc8[56]xx: Put localbus clock in device tree
11317 Export the localbus frequency in the device tree, the same way the CPU, TB,
11318 CCB, and various other frequencies are exported in their respective device
11321 Some localbus devices need this information to be programed correctly, so
11322 it makes sense to export it along with the other frequencies.
11324 Unfortunately, when someone wrote the localbus dts bindings, they didn't
11325 bother to define what the "compatible" property should be. So it seems no
11326 one was quite sure what to put in their dts files.
11328 Based on current existing dts files in the kernel source, I've used
11329 "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
11330 of the 85xx devices, and are looked for by the Linux code. The eLBC is
11331 apparently not entirely backward compatible with the pq3 LBC and so eLBC
11332 equipped platforms like 8572 won't use pq3-localbus.
11334 For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
11335 and is also looked for by the Linux code. On MPC8641, I've also used
11336 "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
11337 which don't use "fsl,elbc" or any other acceptable name to match on.
11339 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
11340 Acked-by: Kumar Gala <galak@kernel.crashing.org>
11341 Acked-by: Jon Loeliger <jdl@freescale.com>
11343 commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
11344 Author: Kumar Gala <galak@kernel.crashing.org>
11345 Date: Tue Dec 16 14:59:22 2008 -0600
11347 NAND FSL elbc: Use virt_to_phys to determine which bank is in use
11349 The current code that determines which bank/chipselect is used for a
11350 given NAND instance only worked for 32-bit addresses and assumed
11351 a 1:1 mapping. This breaks in 36-bit physical configs.
11353 The proper way to handle this is to use the virt_to_phys() and
11354 BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
11355 with the the virtual address the NAND code uses.
11357 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11358 Acked-by: Scott Wood <scottwood@freescale.com>
11360 commit 77c8115b1f1871811633eae77a5a700fac1f0e50
11361 Author: Kumar Gala <galak@kernel.crashing.org>
11362 Date: Tue Dec 16 14:59:21 2008 -0600
11364 ppc: Use addrmap in virt_to_phys and map_physmem.
11366 If we have addr map support enabled use the mapping functions to
11367 implement virt_to_phys() and map_physmem().
11369 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11371 commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
11372 Author: Kumar Gala <galak@kernel.crashing.org>
11373 Date: Tue Dec 16 14:59:20 2008 -0600
11375 85xx: Add support to populate addr map based on TLB settings
11377 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11379 commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
11380 Author: Peter Tyser <ptyser@xes-inc.com>
11381 Date: Mon Dec 1 13:47:13 2008 -0600
11383 XPedite5200 board support
11385 Initial support for Extreme Engineering Solutions XPedite5200 -
11386 a MPC8548-based PMC single board computer.
11388 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11390 commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
11391 Author: Peter Tyser <ptyser@xes-inc.com>
11392 Date: Wed Oct 29 12:39:27 2008 -0500
11394 85xx: Enable inbound PCI config cycles for X-ES boards
11396 Update X-ES Freescale boards to allow inbound PCI configuration
11397 cycles when configured as agent/endpoint.
11399 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11401 commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
11402 Author: Peter Tyser <ptyser@xes-inc.com>
11403 Date: Wed Dec 17 16:36:23 2008 -0600
11405 XPedite5370 board support
11407 Initial support for Extreme Engineering Solutions XPedite5370 -
11408 a MPC8572-based 3U VPX single board computer with a PMC/XMC
11411 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11413 commit e92739d34e2d6b6aca93b2598248210710897ce8
11414 Author: Peter Tyser <ptyser@xes-inc.com>
11415 Date: Wed Dec 17 16:36:21 2008 -0600
11417 Add support for PCA953x I2C gpio devices
11419 Initial support for NXP's 4 and 8 bit I2C gpio expanders
11420 (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
11421 enables support for the devices while the CONFIG_CMD_PCA953X
11422 define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
11423 define enables an 'info' sub-command which provides summary
11424 information for the given pca953x device.
11426 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11428 commit 7a8979591171676417ab36852d8811a8c46accd8
11429 Author: Peter Tyser <ptyser@xes-inc.com>
11430 Date: Wed Oct 29 12:39:26 2008 -0500
11432 pci/fsl_pci_init: Enable inbound PCI config cycles
11434 Add fsl_pci_config_unlock() function to enable a
11435 PCI/PCIe interface configured in agent/endpoint mode to
11436 respond to inbound PCI configuration cycles.
11438 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11440 commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
11441 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11442 Date: Wed Dec 17 16:43:18 2008 +0100
11444 avr32: Remove second definition of virt_to_phys()
11446 The second definition introduced by 65e43a1063 conflicts with the
11449 Also, convert the existing definition to use phys_addr_t. The volatile
11450 qualifier is still needed due to brain damage elsewhere.
11452 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11454 commit b616f2b545f73757669b37386f0b37bb61fc6797
11455 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11456 Date: Mon Sep 8 22:27:18 2008 +0200
11458 MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
11460 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11461 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11463 commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
11464 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11465 Date: Tue Dec 16 22:10:31 2008 +0100
11467 MIPS: qemu_mips: update doc to use all disk and boot linux kernel
11469 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11470 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11472 commit 13095b2f07dacb1f863772266c1789d47a523a8a
11473 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11474 Date: Tue Dec 16 22:10:30 2008 +0100
11476 MIPS: qemu_mips: move env storage just after u-boot
11478 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11479 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11481 commit aced78d852d0b009e8aaa1445af8cb40861ee549
11482 Author: Wolfgang Denk <wd@denx.de>
11483 Date: Tue Dec 16 23:48:27 2008 +0100
11485 Prepare 2009.01-rc1
11487 Signed-off-by: Wolfgang Denk <wd@denx.de>
11489 commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
11490 Author: Wolfgang Denk <wd@denx.de>
11491 Date: Tue Dec 16 23:13:46 2008 +0100
11493 include/configs/at91cap9adk.h: fix typo.
11495 Signed-off-by: Wolfgang Denk <wd@denx.de>
11497 commit 45ca04f2377361593151d2d4da51f8ba4832d233
11498 Author: Wolfgang Denk <wd@denx.de>
11499 Date: Tue Dec 16 22:32:25 2008 +0100
11501 board/trab/memory.c: Fix compile problems.
11503 Apply changes from commit 44b4dbed to board/trab/memory.c, too.
11505 Actually we'd need a major cleanup here - as it turns out,
11506 board/trab/memory.c is more or less a verbatim copy of
11507 post/drivers/memory.c ... but then, trab is EOL anyway,r
11508 so this is not worth the effort.
11510 Signed-off-by: Wolfgang Denk <wd@denx.de>
11512 commit ff49ea8977b56916edd5b1766d9939010e30b181
11513 Author: Scott Wood <scottwood@freescale.com>
11514 Date: Tue Dec 16 14:24:16 2008 -0600
11516 NAND: Mark the BBT as scanned prior to calling scan_bbt.
11518 Otherwise, recursion can occur if scan_bbt does not find a bad block
11519 table, and tries to write one, and the attempt to erase the BBT area
11520 causes a bad block check.
11522 Signed-off-by: Scott Wood <scottwood@freescale.com>
11524 commit 584eedab66d0828f2d571a24b10526c4e65f547b
11525 Author: Ilya Yanok <yanok@emcraft.com>
11526 Date: Thu Dec 11 05:51:57 2008 +0300
11528 jffs2: include <linux/mtd/compat.h> instead of defining own min_t
11530 Include <linux/mtd/compat.h> header for min_t definition instead of
11531 providing our own one. Removes warnings in case of OneNAND support
11534 Although I thinks it's a bit silly to include <linux/mtd/compat.h>
11537 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11538 Acked-by: Stefan Roese <sr@denx.de>
11540 commit b1ffecec37b57a59c139042267faac458e5324e9
11541 Author: Becky Bruce <beckyb@kernel.crashing.org>
11542 Date: Wed Dec 3 23:04:37 2008 -0600
11544 powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
11546 Casting a pointer to a phys_addr_t when it's an unsigned long long
11547 on a 32-bit system without first casting to a non-pointer type
11548 generates a compiler warning. Fix this.
11550 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
11552 commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
11553 Author: Wolfgang Denk <wd@denx.de>
11554 Date: Tue Dec 16 16:22:50 2008 +0100
11556 trab: make trab_fkt standalone code independent of libgcc
11558 Use our own local functions in lib_arm/ instead.
11560 Signed-off-by: Wolfgang Denk <wd@denx.de>
11562 commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
11563 Author: Wolfgang Denk <wd@denx.de>
11564 Date: Tue Dec 16 14:44:06 2008 +0100
11566 post/Makefile: fix dependency problem with parallel builds
11568 Parallel builds (using "make -jN") would occasionally fail with error
11570 ppc_4xxFP-objdump: string.o: File format not recognized
11572 post/libpost.a(cpu.o): In function `cpu_post_test':
11573 /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
11574 or similar. We now make sure to run the 'postdeps" step before
11575 attempting to build the specific POST libraries.
11577 Signed-off-by: Wolfgang Denk <wd@denx.de>
11579 commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
11580 Author: Wolfgang Denk <wd@denx.de>
11581 Date: Tue Dec 16 14:41:02 2008 +0100
11583 Makefile: fix dependency problem with parallel builds
11585 Parallel builds (using "make -jN") would occasionally fail with error
11587 include/autoconf.mk:212: *** missing separator. Stop.
11588 Line numbers and affected boards were changing. Obviously some
11589 Makefiles included autoconf.mk while it was still being written to.
11590 As a fix, we now write to a temporary file first and then rename it,
11591 so that it is really ready to use as soon as it appears.
11593 Signed-off-by: Wolfgang Denk <wd@denx.de>
11595 commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
11596 Author: Wolfgang Denk <wd@denx.de>
11597 Date: Tue Dec 16 01:02:17 2008 +0100
11599 Coding style cleanup, update CHANGELOG.
11601 Signed-off-by: Wolfgang Denk <wd@denx.de>
11603 commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
11604 Author: Mike Frysinger <vapier@gentoo.org>
11605 Date: Thu Dec 11 18:39:08 2008 -0500
11607 spi/stmicro: fix debug() display of cmd
11609 The stmicro_wait_ready() func tries to show the actual opcode that was sent
11610 to the device, but instead it displays the array pointer. Fix it to pull
11611 out the opcode from the start of the array.
11613 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11615 commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
11616 Author: Mike Frysinger <vapier@gentoo.org>
11617 Date: Thu Dec 11 06:23:37 2008 -0500
11619 env_sf: support embedded environments
11621 If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
11622 size is larger than the env size, then it means the env is embedded in a
11623 block. So we have to save/restore the part of the sector which is not the
11624 environment. Previously, saving the environment in SPI flash in this
11625 setup would probably brick the board as the rest of the sector tends to
11626 contain actual U-Boot data/code.
11628 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11629 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11631 commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
11632 Author: Timur Tabi <timur@freescale.com>
11633 Date: Wed Dec 3 11:28:30 2008 -0600
11635 i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
11637 All implementations of the functions i2c_reg_read() and
11638 i2c_reg_write() are identical. We can save space and simplify the
11639 code by converting these functions into inlines and putting them in
11642 Signed-off-by: Timur Tabi <timur@freescale.com>
11643 Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11645 commit e39cd81c44740d7355d277ed3d38536cbe1e003d
11646 Author: Dave Liu <daveliu@freescale.com>
11647 Date: Fri Dec 5 15:36:14 2008 +0800
11649 lib_ppc: rework the flush_cache
11651 - It is possible to miss flush/invalidate the last
11652 cache line, we fix it at here.
11653 - add the volatile and memory clobber.
11655 They are pointed by Scott Wood.
11657 Signed-off-by: Dave Liu <daveliu@freescale.com>
11659 commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
11660 Author: Kumar Gala <galak@kernel.crashing.org>
11661 Date: Sat Dec 13 17:20:28 2008 -0600
11663 Introduce addr_map library
11665 Add a library that helps in translating between virtual and physical
11666 addresses. This library can be useful as a simple means to implement
11667 map_physmem() and virt_to_phys() for platforms that need functionality
11668 beyond the simple 1:1 mapping.
11670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11672 commit 65e43a10631537dcb92c302d36301a12308216c3
11673 Author: Kumar Gala <galak@kernel.crashing.org>
11674 Date: Sat Dec 13 17:20:27 2008 -0600
11676 Introduce virt_to_phys()
11678 virt_to_phys() returns the physical address given a virtual. In most
11679 cases this will be just the input value as the vast majority of
11680 systems run in a 1:1 mode.
11682 However in systems that are not running this way it should report the
11683 physical address or ~0 if no mapping exists for the given virtual
11686 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11688 commit 45845301af3de8675c1f7bbc815c6de35452605a
11689 Author: Yuri Tikhonov <yur@emcraft.com>
11690 Date: Sun Dec 7 22:12:50 2008 +0100
11692 POST Make: fix the sub-dir dependencies missing.
11694 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
11696 commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
11697 Author: Martin Michlmayr <tbm@cyrius.com>
11698 Date: Wed Aug 6 14:44:05 2008 +0300
11700 Fix a typo in fw_env.config
11702 Reported-by: Martin Michlmayr <tbm@cyrius.com>
11703 Signed-off-by: Wolfgang Denk <wd@denx.de>
11705 commit ba490b7761c62b549c222a9723e532dc801a3899
11706 Author: Peter Tyser <ptyser@xes-inc.com>
11707 Date: Mon Dec 1 16:22:45 2008 -0600
11709 Remove unused CONFIG_ADDR_STREAMING defines
11711 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11713 commit d16da93430520d3e46c1ab52eedacf36ab7a2311
11714 Author: Peter Tyser <ptyser@xes-inc.com>
11715 Date: Mon Nov 24 11:54:47 2008 -0600
11717 cmd_mem: Remove unused variable
11719 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11721 commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
11722 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11723 Date: Sun Dec 14 10:29:39 2008 +0100
11727 Also fix some minor typos.
11729 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11730 Signed-off-by: Wolfgang Denk <wd@denx.de>
11732 commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
11733 Author: Sergei Poselenov <sposelenov@emcraft.com>
11734 Date: Fri Sep 19 12:07:34 2008 +0200
11736 Remove compiler warning: target CPU does not support interworking
11738 This warning is issued by modern ARM-EABI GCC on non-thumb targets.
11740 Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
11741 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
11743 commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
11744 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11745 Date: Mon Nov 24 13:33:51 2008 +0100
11747 Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
11749 FDT support is used for both FIT style images and for architectures
11750 that can pass a fdt blob to an OS (ppc, m68k, sparc).
11752 For other architectures and boards which do not pass a fdt blob to an
11753 OS but want to use the new uImage format, we just need FIT support.
11755 Now we can have the 4 following configurations :
11757 1) FIT only CONFIG_FIT
11758 2) fdt blob only CONFIG_OF_LIBFDT
11759 3) both CONFIG_OF_LIBFDT & CONFIG_FIT
11762 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11764 commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
11765 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11766 Date: Wed Dec 10 15:13:32 2008 +0100
11768 ppc4xx: Disable EEPROM write access on PMC440 boards
11770 This patch disables EEPROM wrtie access by default on PMC440 board.
11772 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11774 commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
11775 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11776 Date: Wed Dec 10 15:12:56 2008 +0100
11778 ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
11780 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11782 commit 71fa0714fe5134bc8718c38d5261d267e88582ba
11783 Author: Stefan Roese <sr@denx.de>
11784 Date: Tue Nov 18 16:36:12 2008 +0100
11786 MIPS: Flush data cache upon relocation
11788 This patch now adds a flush to the data cache upon relocation. The
11789 current implementation is missing this. Only a comment states that it
11790 should be done. So let's really do it now.
11792 Signed-off-by: Stefan Roese <sr@denx.de>
11793 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11795 commit 44174343688dba32571a34550dba08971c65fef1
11796 Author: Stefan Roese <sr@denx.de>
11797 Date: Tue Nov 18 16:36:22 2008 +0100
11799 MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
11801 This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
11802 enables support for boards where the lowlevel initialization is
11803 already done when U-Boot runs (e.g. via OnChip ROM).
11805 This will be used in the upcoming VCTH board support.
11807 Signed-off-by: Stefan Roese <sr@denx.de>
11808 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11810 commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
11811 Author: Stefan Roese <sr@denx.de>
11812 Date: Wed Nov 12 13:18:02 2008 +0100
11814 MIPS: Add board_early_init_f() to init_sequence
11816 This patch adds the board_early_init_f() call to the MIPS init
11817 sequence. A weak dummy implementation is also added which can be
11818 overridden by a board specific version.
11820 This will be used by the upcoming VCTH board support.
11822 Signed-off-by: Stefan Roese <sr@denx.de>
11823 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11825 commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
11826 Author: Stefan Roese <sr@denx.de>
11827 Date: Wed Nov 12 13:18:19 2008 +0100
11829 MIPS: Add onenand_init() to board.c and move nand_init()
11831 This patch adds a call to onenand_init() for OneNAND support and moves
11832 the nand_init() call to an earlier place, so that the environment can
11833 be used from NAND and OneNAND.
11835 Signed-off-by: Stefan Roese <sr@denx.de>
11836 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11838 commit d8bbc51c7ba9b737a20984333d19fe28a3526431
11839 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11840 Date: Tue Dec 9 11:32:46 2008 +0900
11842 sh: Update sh2/sh2a timer
11844 Renesas SH2/SH2A timer broken.
11845 This patch fix timer function.
11847 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11848 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11850 commit a319f1496210117b73198e3d889ffffaf6825d00
11851 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11852 Date: Fri Dec 5 07:27:37 2008 +0100
11854 sh: r2dplus fix register access
11856 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11857 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11859 commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
11860 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11861 Date: Tue Dec 2 07:40:03 2008 +0100
11863 sh: r2dplus/lowlevel_init: coding style fix
11865 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11866 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11868 commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
11869 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11870 Date: Tue Nov 25 11:05:19 2008 +0900
11872 sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
11874 SH4 is different a value of CACHE_OC_NUM_ENTRIES and
11875 CACHE_OC_WAY_SHIFT every CPU.
11876 This patch corrects these values.
11878 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11879 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11881 commit e9d5f35497885b3c65d494d09a525d443dcccd3b
11882 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11883 Date: Thu Nov 20 16:44:42 2008 +0900
11885 sh: Update sh timer function
11887 Change to write/readX function and fix timer problem.
11889 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11890 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11892 commit b81786cff476c41e332eaeb679158f6527cd67d4
11893 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11894 Date: Tue Nov 4 11:58:58 2008 +0900
11896 sh: Migo-R: Update BSC value
11898 A value of BSC CS4 was wrong, Fixed it.
11900 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11901 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11903 commit 5783758fd260a02f44566ad8f29f899565cd0403
11904 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11905 Date: Mon Nov 17 16:52:09 2008 +0900
11907 sh: Update ms7722se board config
11909 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11910 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11912 commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
11913 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11914 Date: Mon Nov 17 16:53:09 2008 +0900
11916 sh: Update SuperH serial driver
11918 The address of SCFSR register is wrong at SH7720/SH7721.
11919 This patch fix this.
11921 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11922 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11924 commit 9a1d3557dcd47365c12eeab584b822e57d994352
11925 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11926 Date: Tue Nov 11 22:20:15 2008 +0100
11928 sh: fix rsk7203 and MigoR out of tree build
11930 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11931 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11933 commit 1951f847f0a851853871b613ad7cf21a5242226c
11934 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11935 Date: Wed Dec 10 14:41:25 2008 +0100
11937 ppc4xx: Update TEXT_BASE for CPCI405 boards
11939 This patch fixes building U-Boot for CPCI405 boards.
11941 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11942 Signed-off-by: Stefan Roese <sr@denx.de>
11944 commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
11945 Author: Stefan Roese <sr@denx.de>
11946 Date: Tue Dec 9 20:08:01 2008 +0100
11948 ppc4xx: Remove some features from ALPR to fit into 256k again
11950 Signed-off-by: Stefan Roese <sr@denx.de>
11952 commit 3b089e4f889a2902449d55e081c886ae607cae89
11953 Author: Stefan Roese <sr@denx.de>
11954 Date: Wed Dec 10 10:32:59 2008 +0100
11956 UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
11958 With this patch we set the type back to NONE upon failing UBI partition
11959 initialization. Otherwise further calls to the UBI subsystem would try
11960 to really access the non-existing UBI partition.
11962 Thanks to Michael Lawnick for pointing this out.
11964 Signed-off-by: Stefan Roese <sr@denx.de>
11966 commit 817329351639a8895cd9b87b33aeff043f3d5a44
11967 Author: Stefan Roese <sr@denx.de>
11968 Date: Wed Dec 10 10:28:33 2008 +0100
11970 UBI: Return -ENOMEM upon failing malloc
11972 Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
11975 Signed-off-by: Stefan Roese <sr@denx.de>
11977 commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
11978 Author: Ben Warren <biggerbadderben@gmail.com>
11979 Date: Tue Dec 9 23:34:15 2008 -0800
11981 Fix compile error in building MBX860T.
11983 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11985 commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
11986 Author: Michal Simek <monstr@monstr.eu>
11987 Date: Tue Nov 25 11:42:20 2008 +0100
11989 microblaze: Remove XUPV2P board
11993 Microblaze platforms use generic settings and to have
11994 many platforms is confusing that's why I decided to remove this
11995 platform from U-BOOT. ml401 tree is sufficient for covering
11996 all Microblaze platforms.
11998 This change will go through microblaze custodian tree.
12000 commit 99ba6f353582720defff6e6e6761dc455a207d31
12001 Author: Michal Simek <monstr@monstr.eu>
12002 Date: Mon Nov 24 18:25:41 2008 +0100
12004 microblaze: Remove CONFIG_LIBFDT due to error in common files
12006 commit e7d591e823a991513833af7030468409e25a3b13
12007 Author: Michal Simek <monstr@monstr.eu>
12008 Date: Mon Nov 24 11:43:00 2008 +0100
12010 microblaze: Fix ml401 uart16550 setting
12012 Signed-off-by: Michal Simek <monstr@monstr.eu>
12014 commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
12015 Author: Michal Simek <monstr@monstr.eu>
12016 Date: Mon Nov 24 11:38:22 2008 +0100
12018 microblaze: Set up relocation is done
12020 commit bcb6dd9187d4b23c748704767bd12d20c829e996
12021 Author: Mike Frysinger <vapier@gentoo.org>
12022 Date: Tue Dec 9 23:20:31 2008 -0500
12024 tools/netconsole: new script for working with netconsole over UDP
12026 While the doc/README.NetConsole does have a snippet for people to
12027 create their own netcat script, it's a lot easier to make a simple
12028 dedicated script and tell people to use it.
12030 Also spruce it up a bit to make it user friendly.
12032 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12034 commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
12035 Author: Sonic Zhang <Sonic.Zhang@analog.com>
12036 Date: Tue Dec 9 23:20:18 2008 -0500
12038 fs/fat: handle FAT on SATA
12040 The FAT file system driver should also handle FAT on SATA devices.
12042 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
12043 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12045 commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
12046 Author: Ben Warren <biggerbadderben@gmail.com>
12047 Date: Tue Dec 9 23:26:31 2008 -0800
12049 Fix compile error in building MBX860T.
12050 Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd
12052 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12054 commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
12055 Author: Jerry Van Baren <gvb.uboot@gmail.com>
12056 Date: Mon Nov 24 08:15:02 2008 -0500
12058 libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
12060 Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the
12061 following warnings from FDT:
12063 include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
12064 /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
12066 Fix: Protect the definition of uintptr_t when compiling on the host
12069 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12071 commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
12072 Author: Graeme Russ <graeme.russ@gmail.com>
12073 Date: Sat Nov 22 08:43:29 2008 +1100
12075 Moved sc520 PCI definitions to stand-alone file
12077 Signed Off By: Graeme Russ <graeme.russ@gmail.com>
12079 commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
12080 Author: Graeme Russ <graeme.russ@gmail.com>
12081 Date: Sat Nov 22 08:43:21 2008 +1100
12083 Fixed path to sc520 SSI include file
12085 Signed Off By: Graeme Russ <graeme.russ@gmail.com>
12087 commit d4f70da544c33db3e4fce6473dea4ecca4322545
12088 Author: Graeme Russ <graeme.russ@gmail.com>
12089 Date: Fri Nov 21 06:28:05 2008 +1100
12091 Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
12093 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
12095 commit c034075a713b60e654c64e88e87da29440f31bb4
12096 Author: Stefan Roese <sr@denx.de>
12097 Date: Wed Nov 12 13:30:10 2008 +0100
12099 serial: Add vcth UART driver
12101 This patch adds the UART driver for the upcoming VCTH board support.
12103 Signed-off-by: Stefan Roese <sr@denx.de>
12105 commit 142a80ffc3b537a9c45acd2444a42a77f147c602
12106 Author: Ilya Yanok <yanok@emcraft.com>
12107 Date: Thu Nov 13 19:49:36 2008 +0300
12109 jffs2: cache data_crc results
12111 As we moved data_crc() invocation from jffs2_1pass_build_lists() to
12112 jffs2_1pass_read_inode() data_crc is going to be calculated on each
12113 inode access. This patch adds caching of data_crc() results. There
12114 is no significant improvement in speed (because of flash access
12115 caching added in previous patch I think, crc in RAM is really fast)
12116 but this patch impacts memory usage -- every b_node structure uses
12117 12 bytes instead of 8.
12119 Signed-off-by: Alexey Neyman <avn@emcraft.com>
12120 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12122 commit 9b7076229ec6a958bd835ab70745f7676297ce82
12123 Author: Ilya Yanok <yanok@emcraft.com>
12124 Date: Thu Nov 13 19:49:35 2008 +0300
12126 jffs2: summary support
12128 This patch adds support for reading fs information from summary
12129 node instead of scanning full eraseblock.
12131 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12133 commit 70741004dc28946cd82c7af6789c4ddb3fc94526
12134 Author: Ilya Yanok <yanok@emcraft.com>
12135 Date: Thu Nov 13 19:49:34 2008 +0300
12137 jffs2: add buffer to cache flash accesses
12139 With this patch JFFS2 code allocates memory buffer of max_totlen size
12140 (size of the largest node, calculated during scan time) and uses it to
12141 store entire node. Speeds up loading. If malloc fails we use old ways
12144 Signed-off-by: Alexey Neyman <avn@emcraft.com>
12145 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12147 commit 8a36d31f72411144ac0412ee7e1880e801acd754
12148 Author: Ilya Yanok <yanok@emcraft.com>
12149 Date: Thu Nov 13 19:49:33 2008 +0300
12151 jffs2: rewrite jffs2 scanning code based on Linux one
12153 Rewrites jffs2_1pass_build_lists() function in style of Linux's
12154 jffs2_scan_medium() and jffs2_scan_eraseblock().
12156 - Caching flash acceses
12157 - Smart dealing with free space
12159 Signed-off-by: Alexey Neyman <avn@emcraft.com>
12160 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12162 commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
12163 Author: Ilya Yanok <yanok@emcraft.com>
12164 Date: Thu Nov 13 19:49:32 2008 +0300
12166 jffs2: add sector_size field to part_info structure
12168 This patch adds sector_size field to part_info structure (used
12169 by new JFFS2 code).
12171 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12173 commit f73846956778a7dfee83403ef9747aff77198848
12174 Author: Ilya Yanok <yanok@emcraft.com>
12175 Date: Thu Nov 13 19:49:31 2008 +0300
12177 jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
12179 We need to update i_version inside cycle to find really latest version
12180 inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
12181 dump_inode() instead of calling expensive jffs2_1pass_read_inode().
12183 Signed-off-by: Alexey Neyman <avn@emcraft.com>
12184 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12186 commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
12187 Author: Wolfgang Denk <wd@denx.de>
12188 Date: Tue Dec 9 23:13:51 2008 +0100
12190 evb64260: fix "cast to pointer from integer of different size" warnings
12192 Signed-off-by: Wolfgang Denk <wd@denx.de>
12194 commit d2776827315c3d469b8cb4cec14d58877798daa2
12195 Author: Stefan Althoefer <stefan.althoefer@web.de>
12196 Date: Sun Dec 7 19:39:11 2008 +0100
12198 USB: descriptor handling
12202 I found a bug when working with the u-boot USB subsystem on IXP425 processor
12203 (big endian Xscale aka ARMv5).
12204 I recognized that the second usb_endpoint_descriptor of the attached memory
12205 stick was corrupted.
12207 The reason for this are the packed structures below (either u-boot and
12211 /* Endpoint descriptor */
12212 struct usb_endpoint_descriptor {
12213 unsigned char bLength;
12214 unsigned char bDescriptorType;
12215 unsigned char bEndpointAddress;
12216 unsigned char bmAttributes;
12217 unsigned short wMaxPacketSize;
12218 unsigned char bInterval;
12219 unsigned char bRefresh;
12220 unsigned char bSynchAddress;
12222 } __attribute__ ((packed));
12223 /* Interface descriptor */
12224 struct usb_interface_descriptor {
12225 unsigned char bLength;
12226 unsigned char bDescriptorType;
12227 unsigned char bInterfaceNumber;
12228 unsigned char bAlternateSetting;
12229 unsigned char bNumEndpoints;
12230 unsigned char bInterfaceClass;
12231 unsigned char bInterfaceSubClass;
12232 unsigned char bInterfaceProtocol;
12233 unsigned char iInterface;
12235 unsigned char no_of_ep;
12236 unsigned char num_altsetting;
12237 unsigned char act_altsetting;
12238 struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
12239 } __attribute__ ((packed));
12242 As usb_endpoint_descriptor is only 7byte in length, the start of all
12243 odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
12244 of these structures also not word aligned.
12246 ARMv5 Architecture however does not support non-aligned multibyte
12247 data type (see A2.8 of ARM Architecture Reference Manual).
12249 Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
12250 Signed-off-by: Remy Böhmer <linux@bohmer.net>
12252 commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
12253 Author: Kumar Gala <galak@kernel.crashing.org>
12254 Date: Tue Dec 9 10:27:33 2008 -0600
12256 drivers/fsl_pci_init: Fix compile warning
12258 fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
12259 fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
12261 The check only makes sense if we are CONFIG_PHYS_64BIT
12263 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12265 commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
12266 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12267 Date: Sun Dec 7 09:45:35 2008 +0100
12269 usbtty/omap: update to current API
12271 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12272 Signed-off-by: Remy Böhmer <linux@bohmer.net>
12274 commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
12275 Author: Anatolij Gustschin <agust@denx.de>
12276 Date: Tue Dec 9 17:52:05 2008 +0100
12278 video: fix FADS823 and RRvision compiling issues
12280 Since commit 561858ee building for FADS823 and RRvision
12281 doesn't work. Let's include version.h and timestamp.h
12282 unconditionally to fix the problem.
12284 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12286 commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
12287 Author: Stefan Roese <sr@denx.de>
12288 Date: Tue Dec 2 10:53:47 2008 +0100
12290 UBI: Fix size parsing in "ubi create"
12292 Signed-off-by: Stefan Roese <sr@denx.de>
12294 commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
12295 Author: Stefan Roese <sr@denx.de>
12296 Date: Thu Nov 27 14:07:09 2008 +0100
12298 UBI: Enable re-initializing of the "ubi part" command
12300 With this patch now, the user can call "ubi part" multiple times to
12301 re-connect the UBI device to another MTD partition.
12303 Signed-off-by: Stefan Roese <sr@denx.de>
12305 commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
12306 Author: Stefan Roese <sr@denx.de>
12307 Date: Thu Nov 27 14:05:15 2008 +0100
12309 MTD: Fix problem based on non-working relocation (list head mtd_partitions)
12311 Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
12312 first call of add_mtd_partitions(). Otherwise this won't work on platforms
12313 where the relocation is broken (like MIPS or PPC).
12315 Signed-off-by: Stefan Roese <sr@denx.de>
12317 commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
12318 Author: Trent Piepho <tpiepho@freescale.com>
12319 Date: Wed Nov 12 17:29:48 2008 -0800
12321 Section name should be ".data", not "data"
12323 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
12324 Signed-off-by: Wolfgang Denk <wd@denx.de>
12326 commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
12327 Author: Wolfgang Denk <wd@denx.de>
12328 Date: Tue Dec 9 00:39:08 2008 +0100
12330 MAKEALL: Automatically use parallel builds
12332 Add logic to the MAKEALL script to determine the number of CPU cores
12333 on the system, and run a parallel build if there is more than one.
12334 Usually this significantrly accelerates builds.
12336 Allow to manually adjust the number of parallel make jobs by using
12337 the "BUILD_NCPUS" environment variable.
12339 Signed-off-by: Wolfgang Denk <wd@denx.de>
12341 commit 268405fa7c44156c5192a70779920c70906af8d6
12342 Author: Wolfgang Denk <wd@denx.de>
12343 Date: Tue Dec 9 00:24:30 2008 +0100
12345 vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
12347 Signed-off-by: Wolfgang Denk <wd@denx.de>
12349 commit 153176a9414120ca1736f3cc4951623d6e14e6af
12350 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12351 Date: Tue Nov 11 06:08:59 2008 +0100
12353 avr32/bootm: remove unused variable 'ret'
12355 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12356 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12358 commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
12359 Author: Peter Tyser <ptyser@xes-inc.com>
12360 Date: Wed Nov 12 13:06:48 2008 -0600
12362 Remove unneeded CONFIG_SHELL references
12364 Make should be using the bash shell by default which makes
12365 CONFIG_SHELL unnecessary
12367 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12369 commit cf7a7b99794bac936899819b95539be1dbd71708
12370 Author: Peter Tyser <ptyser@xes-inc.com>
12371 Date: Wed Nov 12 12:33:20 2008 -0600
12373 Use bash for default GNU Make shell application
12375 Some Make script commands rely on bash-specific features like brace
12376 expansion, so default to bash for the SHELL variable with a fallback
12377 to the standard sh shell
12379 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12381 commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
12382 Author: Heiko Schocher <hs@denx.de>
12383 Date: Wed Nov 12 09:50:45 2008 +0100
12385 jffs2: rename devices_init () in common/jffs2.c
12387 rename devices_init () in common/jffs2.c to
12388 jffs2_devices_init (), because there is also a
12389 devices_init () in common/devices.c.
12391 Signed-off-by: Heiko Schocher <hs@denx.de>
12393 commit af5eb847a10f1037590001355d88bab3fe7be48b
12394 Author: Daniel Hellstrom <daniel@gaisler.com>
12395 Date: Mon Nov 10 12:46:20 2008 +0000
12397 SPARC: Fixed compiler error introduced by commit c160a9544743
12399 This patch fixes a build error for the SPARC platform. It was
12400 introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
12402 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
12404 commit 4c60259899aa00f59db0d936b8807f9a26411c0f
12405 Author: Gary Jennejohn <garyj@denx.de>
12406 Date: Sun Nov 9 12:50:59 2008 +0100
12408 mgsuvd add the board-specific part of the HDLC driver
12410 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12412 commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
12413 Author: Gary Jennejohn <garyj@denx.de>
12414 Date: Sun Nov 9 12:45:03 2008 +0100
12416 mgcoge add the board-specific part of the HDLC driver
12418 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12420 commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
12421 Author: Gary Jennejohn <garyj@denx.de>
12422 Date: Sun Nov 9 12:36:15 2008 +0100
12424 keymile add the common parts of the HDLC driver
12426 This implements the ICN protocol used across the backplane and is
12427 needed by all the keymile boards.
12429 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12431 commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
12432 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12433 Date: Fri Nov 7 22:46:22 2008 +0100
12435 drivers/bios_emulator: Move conditional compilation to Makefile
12437 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12439 commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
12440 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
12441 Date: Thu Nov 6 14:01:51 2008 -0500
12443 common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
12445 Corrected endian order printing for compact flash serial number.
12447 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
12449 commit 16a28ef219c27423a1ef502f19070c4d375079b8
12450 Author: Gary Jennejohn <garyj@denx.de>
12451 Date: Thu Nov 6 15:04:23 2008 +0100
12453 IOMUX: Add console multiplexing support.
12455 Modifications to support console multiplexing. This is controlled using
12456 CONFIG_SYS_CONSOLE_MUX in the board configuration file.
12458 This allows a user to specify multiple console devices in the environment
12459 with a command like this: setenv stdin serial,nc. As a result, the user can
12460 enter text on both the serial and netconsole interfaces.
12462 All devices - stdin, stdout and stderr - can be set in this manner.
12464 1) common/iomux.c and include/iomux.h contain the environment setting
12466 2) doc/README.iomux contains a somewhat more detailed description.
12467 3) The implementation in (1) is called from common/cmd_nvedit.c to
12468 handle setenv and from common/console.c to handle initialization of
12469 input/output devices at boot time.
12470 4) common/console.c also contains the code needed to poll multiple console
12471 devices for input and send output to all devices registered for output.
12472 5) include/common.h includes iomux.h and common/Makefile generates iomux.o
12473 when CONFIG_SYS_CONSOLE_MUX is set.
12475 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12477 commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
12478 Author: Mike Frysinger <vapier@gentoo.org>
12479 Date: Tue Nov 4 16:03:46 2008 -0500
12481 strings: use puts() rather than printf()
12483 When running `strings` on really long strings, the stack tends to get
12484 smashed due to printf(). Switch to puts() instead since we're only passing
12487 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12489 commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
12490 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
12491 Date: Mon Nov 3 22:16:18 2008 +0100
12493 Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
12495 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
12497 commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
12498 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
12499 Date: Mon Nov 3 22:15:34 2008 +0100
12501 cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
12503 - fix size too small by one in sprintf
12504 - changed old (pre 2004) device name ibmEmac to emac
12505 - boot device may be overriden in board config
12506 - servername may be defined in board config
12507 - additional parameters may be defined in board config
12508 - fixed some line wrappings
12509 - replaced redundant MAX define by max
12511 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
12513 commit e9084b23d16102f44ace24379a1c0c352497ef80
12514 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
12515 Date: Mon Nov 3 22:14:36 2008 +0100
12517 Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
12519 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
12521 commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
12522 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
12523 Date: Mon Nov 3 22:13:47 2008 +0100
12525 README: Document CONFIG_SYS parameters for vxworks
12527 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
12529 commit ace514837cac656e29c37a19569cb8ea83071126
12530 Author: Peter Tyser <ptyser@xes-inc.com>
12531 Date: Fri Oct 31 11:12:38 2008 -0500
12533 lcd: Let the board code show board-specific info cleanup
12535 remove unneeded version.h from lcd.c
12537 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12538 Signed-off-by: Wolfgang Denk <wd@denx.de>
12540 commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
12541 Author: Peter Tyser <ptyser@xes-inc.com>
12542 Date: Mon Nov 3 09:30:59 2008 -0600
12544 Update U-Boot's build timestamp on every compile
12546 Use the GNU 'date' command to auto-generate a new U-Boot
12547 timestamp on every compile.
12549 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12551 commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
12552 Author: Remy Bohmer <linux@bohmer.net>
12553 Date: Thu Dec 4 22:25:57 2008 +0100
12555 Remove redundant armv4 flag from arm926ejs compile flags
12557 Currently the arm926ejs tree has the armv4 option set during compilation.
12558 This flag does not belong here because a arm926 CPU is always a armv5 CPU.
12560 Signed-off-by: Remy Bohmer <linux@bohmer.net>
12562 commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
12563 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
12564 Date: Sat Dec 6 13:11:14 2008 +0100
12566 at91: Choose environment variables location within make config target
12568 This patch adds the possiblity to choose the media where the environment will
12569 be located. This allow to choose this fundamental configuration without editing
12572 Documentation file added.
12574 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
12575 Acked-by: Stelian Pop <stelian@popies.net>
12576 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12578 commit 1450c4a6682378567030414a9f1198c39b7730c7
12579 Author: Anatolij Gustschin <agust@denx.de>
12580 Date: Mon Nov 3 15:30:34 2008 +0100
12582 lwmon, tqm8xx: Fix build errors
12584 Commit 6b59e03e0237a40a2305ea385defdfd92000978b
12585 lcd: Let the board code show board-specific info
12587 introduced some bugs which prevent U-Boot building
12588 for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
12589 be defined in the board configuration.
12591 Also "LCD enabled" building for TQM823L doesn't work
12594 This patch fixes above-mentioned issues.
12596 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12598 commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
12599 Author: Mike Frysinger <vapier@gentoo.org>
12600 Date: Sun Nov 2 01:18:18 2008 -0400
12602 ignore .gdb_history files
12604 When using gdb, history files will often get generated. So ignore them.
12606 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12608 commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
12609 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12610 Date: Fri Oct 31 12:26:55 2008 +0100
12612 FPGA: move fpga drivers to drivers/fpga
12614 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12616 commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
12617 Author: Peter Tyser <ptyser@xes-inc.com>
12618 Date: Mon Dec 1 16:29:38 2008 -0600
12620 net: Fix TftpStart() ip:filename bug
12622 The TftpStart() function modifies the 'BootFile'
12623 string when 'BootFile' contains both an IP address
12624 and filename (eg 1.2.3.4:/path/file). This causes
12625 subsequent calls to TftpStart to incorrectly parse
12626 the TFTP filename and server IP address to use.
12629 => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
12630 Speed: 100, half duplex
12631 Using eTSEC1 device
12632 TFTP from server 10.52.0.62; our IP address is 10.52.253.79
12634 Filename '/home/ptyser/non_existant'.
12635 ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
12636 Load address: 0x100000
12638 TFTP error: 'File not found' (1)
12642 Speed: 100, half duplex
12643 Using eTSEC1 device
12644 TFTP from server 10.52.0.33; our IP address is 10.52.253.79
12646 Filename '10.52.0.62'.
12648 Load address: 0x100000
12650 TFTP error: 'File not found' (1)
12653 TftpStart() was modified to not modify the 'BootFile' string.
12655 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12656 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12658 commit d32c5be50bf0600bfdc54223ef341ee9c63db445
12659 Author: Peter Tyser <ptyser@xes-inc.com>
12660 Date: Mon Dec 1 16:26:21 2008 -0600
12662 net: Add additional IP fragmentation check
12664 Ignore IP packets which have the "more fragments" flag bit
12665 set. This flag indicates the IP packet is fragmented and
12666 must be ignored by U-Boot.
12668 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12669 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12671 commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
12672 Author: Peter Tyser <ptyser@xes-inc.com>
12673 Date: Mon Dec 1 16:26:20 2008 -0600
12675 net: Define IP flag field values
12677 These defines were pulled from the "Add simple
12678 IP/UDP fragmentation support" patch from Frank
12679 Haverkamp <haver@vnet.ibm.com>.
12681 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12682 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12684 commit 23afaba65ec5206757e589ef334a8b38168c045f
12685 Author: Anatolij Gustschin <agust@denx.de>
12686 Date: Tue Dec 2 10:31:04 2008 +0100
12688 net: tsec: Fix Marvell 88E1121R phy init
12690 This patch tries to ensure that phy interrupt pin
12691 won't be asserted after booting. We experienced
12692 following issues with current 88E1121R phy init:
12694 Marvell 88E1121R phy can be hardware-configured
12695 to share MDC/MDIO and interrupt pins for both ports
12696 P0 and P1 (e.g. as configured on socrates board).
12697 Port 0 interrupt pin will be shared by both ports
12698 in such configuration. After booting Linux and
12699 configuring eth0 interface, port 0 phy interrupts
12700 are enabled. After rebooting without proper eth0
12701 interface shutdown port 0 phy interrupts remain
12702 enabled so any change on port 0 (link status, etc.)
12703 cause assertion of the interrupt. Now booting Linux
12704 and configuring eth1 interface will cause permanent
12705 phy interrupt storm as the registered phy 1 interrupt
12706 handler doesn't acknowledge phy 0 interrupts. This
12707 of course should be fixed in Linux driver too.
12709 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12710 Acked-by: Andy Fleming <afleming@freescale.com>
12711 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12713 commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
12714 Author: Peter Tyser <ptyser@xes-inc.com>
12715 Date: Tue Dec 2 12:59:51 2008 -0600
12717 net: Fix download command parsing
12719 When CONFIG_SYS_HUSH_PARSER is defined network download
12720 commands with 1 argument in the format 'tftp "/path/file"'
12721 do not work as expected. The hush command parser strips
12722 the quotes from "/path/file" which causes the network
12723 commands to interpret "/path/file" as an address
12724 instead of the intended filename.
12726 The previous check for a leading quote in netboot_common()
12727 was replaced with a check which ensures only valid
12728 numbers are treated as addresses.
12730 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12731 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12733 commit 3c2c2f427905040c1513d0c51d637689cba48346
12734 Author: Remy Bohmer <linux@bohmer.net>
12735 Date: Thu Nov 27 22:30:27 2008 +0100
12737 Remove non-ascii characters from fat code
12739 This code contains some non-ascii characters in comment lines and code.
12740 Most editors do not display those characters properly and editing those
12741 files results always in diffs at these places which are usually not required
12742 to be changed at all. This is error prone.
12744 So, remove those weird characters and replace them by normal C-style
12745 equivalents for which the proper defines were already in the header.
12747 Signed-off-by: Remy Bohmer <linux@bohmer.net>
12749 commit dc889e865356497d3e495570118c2245ebce2631
12750 Author: Dave Liu <daveliu@freescale.com>
12751 Date: Fri Nov 28 20:16:58 2008 +0800
12753 85xx: fix the wrong DDR settings for MPC8572DS
12755 The default DDR freq is 400MHz or 800M data rate,
12756 the old settings is pure wrong for the default case.
12758 Signed-off-by: Dave Liu <daveliu@freescale.com>
12759 Acked-by: Andy Fleming <afleming@freescale.com>
12761 commit 9df59533f77de2829b4b66e5b7620e04edaa391c
12762 Author: Kumar Gala <galak@kernel.crashing.org>
12763 Date: Mon Nov 24 10:29:26 2008 -0600
12765 85xx: init gd as early as possible
12767 Moved up the initialization of GD so C code like set_tlb() can use
12768 gd->flags to determine if we've relocated or not in the future.
12770 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12771 Acked-by: Andy Fleming <afleming@freescale.com>
12773 commit aed461af81012a398a205e9be67ab37667491838
12774 Author: Kumar Gala <galak@kernel.crashing.org>
12775 Date: Mon Nov 24 10:29:25 2008 -0600
12777 85xx: Fix relocation of CCSRBAR
12779 If the virtual address for CCSRBAR is the same after relocation but
12780 the physical address is changing we'd end up having two TLB entries with
12781 the same VA. Instead we new us the new CCSRBAR virt address + 4k as a
12782 temp virt address to access the old CCSRBAR to relocate it.
12784 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12785 Acked-by: Andy Fleming <afleming@freescale.com>
12787 commit ea154a1781135d822eedee7567cc156089eae93c
12788 Author: Kumar Gala <galak@kernel.crashing.org>
12789 Date: Mon Nov 24 10:25:14 2008 -0600
12791 FSL: Moved BR_PHYS_ADDR for localbus to common header
12793 The BR_PHYS_ADDR macro is useful on all machines that have local bus
12794 which is pretty much all 83xx/85xx/86xx chips.
12796 Additionally most 85xx & 86xx will need it if they want to support
12797 36-bit physical addresses.
12799 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12800 Acked-by: Andy Fleming <afleming@freescale.com>
12802 commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
12803 Author: Peter Tyser <ptyser@xes-inc.com>
12804 Date: Mon Dec 1 13:47:12 2008 -0600
12806 85xx: Add PORDEVSR_PCI1 define
12808 Add define used to determine if PCI1 interface is in PCI or PCIX mode.
12810 Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
12812 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12813 Signed-off-by: Andy Fleming <afleming@freescale.com>
12815 commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
12816 Author: Becky Bruce <becky.bruce@freescale.com>
12817 Date: Fri Nov 21 19:24:22 2008 -0600
12819 drivers/fsl_pci_init: Fix inbound window mapping bug
12821 The current code will cause the creation of a 4GB window
12822 starting at 0 if we have more than 4GB of RAM installed,
12823 which overlaps with PCI_MEM space and causes pci_bus_to_phys()
12824 to return erroneous information. Limit the size to 4GB - 1;
12825 which causes the code to create one 2GB and one 1GB window
12828 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
12829 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12830 Acked-by: Andy Fleming <afleming@freescale.com>
12832 commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
12833 Author: Jon Loeliger <jdl@freescale.com>
12834 Date: Thu Nov 20 15:36:48 2008 -0600
12836 Removed unused CONFIG_L1_INIT_RAM symbol.
12838 Prevent further viral propogation of the unused
12839 symbol CONFIG_L1_INIT_RAM by just removing it.
12841 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12842 Acked-by: Andy Fleming <afleming@freescale.com>
12844 commit 7008d26a40a76f90cae5824c812cfed449fb97b8
12845 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12846 Date: Wed Oct 29 09:21:44 2008 -0500
12848 fsl ddr skip interleaving if not supported.
12850 Removed while(1) hang if memctl_intlv_ctl is set wrong.
12851 Remove embedded tabs from strings.
12853 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12854 Acked-by: Kumar Gala <galak@kernel.crashing.org>
12855 Acked-by: Andy Fleming <afleming@freescale.com>
12857 commit dd332e18d082de75eca3fc2c7c778f5d4571a096
12858 Author: Anatolij Gustschin <agust@denx.de>
12859 Date: Thu Nov 13 18:08:57 2008 +0100
12861 85xx: socrates: fix DDR SDRAM tlb entry configuration
12863 since commit be0bd8234b9777ecd63c4c686f72af070d886517
12864 tlb entry for socrates DDR SDRAM will be reconfigured
12865 by setup_ddr_tlbs() from initdram() causing an
12866 inconsistency with previously configured DDR SDRAM tlb
12867 entry from tlb_table:
12870 IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS
12871 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX
12872 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX
12873 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX
12875 This patch makes the presence of the DDR SDRAM tlb entry in
12876 the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
12879 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12880 Acked-by: Andy Fleming <afleming@freescale.com>
12882 commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
12883 Author: Peter Tyser <ptyser@xes-inc.com>
12884 Date: Tue Nov 11 10:17:10 2008 -0600
12886 85xx: Add CPU 2 errata workaround to all 8548 boards
12888 All mpc8548-based boards should implement the suggested workaround
12889 to CPU 2 errata. Without the workaround, its possible for the
12890 8548's core to hang while executing a msync or mbar 0 instruction
12891 and a snoopable transaction from an I/O master tagged to make
12892 quick forward progress is present.
12894 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12895 Acked-by: Andy Fleming <afleming@freescale.com>
12897 commit e57f0fa1333cdf3ca36110aac2900712a5f82976
12898 Author: Dave Liu <daveliu@freescale.com>
12899 Date: Tue Oct 28 17:53:45 2008 +0800
12901 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
12903 we need TLB entry for DDR at !SPD case.
12905 Signed-off-by: Dave Liu <daveliu@freescale.com>
12906 Acked-by: Andy Fleming <afleming@freescale.com>
12908 commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
12909 Author: Dave Liu <daveliu@freescale.com>
12910 Date: Tue Oct 28 17:53:38 2008 +0800
12912 85xx: remove the unused ddr_enable_ecc in the board file
12914 The DDR controller of 8548/8544/8568/8572/8536 processors
12915 have the ECC data init feature, and the new DDR code is
12916 using the feature, and we don't need the way with DMA to
12917 init memory any more.
12919 Signed-off-by: Dave Liu <daveliu@freescale.com>
12920 Acked-by: Andy Fleming <afleming@freescale.com>
12922 commit 4a129a57d923f7c15aa1f567028a80a32d66a100
12923 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12924 Date: Sun Nov 30 19:36:53 2008 +0100
12926 at91rm9200dk: Fix typo
12928 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12930 commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
12931 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12932 Date: Sun Nov 30 19:36:50 2008 +0100
12934 AT91: remove non supported board AT91RM9200DF macro
12936 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12938 commit bd876772ee04095e5dd943d97515a1f14bad4b1c
12939 Author: Ilko Iliev <iliev@ronetix.at>
12940 Date: Tue Dec 2 17:27:54 2008 +0100
12942 mtd/dataflash.c: fix a problem with the last partition
12944 This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
12945 partition can be defined to use the area to the end of dataflash size.
12946 Now it is possible to have only one dataflash partition from 0 to the end
12947 of of dataflash size.
12949 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
12951 commit 03f797793b124dccaae145b977d15d6cb9e74504
12952 Author: Ilko Iliev <iliev@ronetix.at>
12953 Date: Tue Dec 2 17:20:17 2008 +0100
12955 fix some coding style violations.
12957 This patch fix some coding style violations.
12959 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
12961 commit 5e46b1e54112f4b7fd5185665e571510132c12a7
12962 Author: Stefan Roese <sr@denx.de>
12963 Date: Thu Nov 27 14:11:37 2008 +0100
12965 OneNAND: Add missing mtd info struct before calling onenand_erase()
12967 Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
12968 for use in UBI) via CONFIG_MTD_PARTITIONS.
12970 Signed-off-by: Stefan Roese <sr@denx.de>
12971 Signed-off-by: Scott Wood <scottwood@freescale.com>
12973 commit 29382d4064fbaff5daacff4c3209370fa5713966
12974 Author: Becky Bruce <becky.bruce@freescale.com>
12975 Date: Thu Nov 20 16:43:52 2008 -0600
12977 mpc8641: Fix error in README
12979 I made some updates to the code that didn't make it into the
12982 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12984 commit 801a194616d95e6fc426a176d9615ccbf9876c7f
12985 Author: Jon Loeliger <jdl@freescale.com>
12986 Date: Thu Nov 20 12:01:02 2008 -0600
12988 Removed unused CONFIG_L1_INIT_RAM symbol.
12990 Prevent further viral propogation of the unused
12991 symbol CONFIG_L1_INIT_RAM by just removing it.
12993 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12995 commit f698738e46cb461e28c2d58228bb34a2fcf5a475
12996 Author: Jon Loeliger <jdl@freescale.com>
12997 Date: Thu Nov 20 14:02:56 2008 -0600
12999 86xx: Fix non-64-bit compilation problems.
13001 Introducing 64-bit (36-bit) support for the MPC8641HPCN
13002 failed to accomodate the other two 86xx boards.
13003 Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
13004 CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
13005 with nominal 32-bit values.
13007 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13008 Acked-by: Becky Bruce <becky.bruce@freescale.com>
13010 commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
13011 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
13012 Date: Wed Nov 26 17:40:37 2008 +0100
13014 Remove obsolete command (apply afte USB style patch, 80 chars strict)
13016 Remove USB obsolete commmand
13018 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
13019 Signed-off-by: Remy Böhmer <linux@bohmer.net>
13021 commit de39f8c19d7c12017248c49d432dcb81db68f724
13022 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
13023 Date: Wed Nov 26 17:41:34 2008 +0100
13025 USB style patch, 80 chars strict
13027 USB Code style patch
13029 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
13030 Signed-off-by: Remy Böhmer <linux@bohmer.net>
13032 commit d10c5a87cb8affbb4d35a311370316d4383d598e
13033 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13034 Date: Fri Nov 7 22:46:21 2008 +0100
13036 drivers/usb: Move conditional compilation to Makefile
13038 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13039 Signed-off-by: Remy Böhmer <linux@bohmer.net>
13041 commit 2077e348c2a84901022ad95311b47b70361e6daa
13042 Author: Scott Wood <scottwood@freescale.com>
13043 Date: Tue Nov 25 10:47:02 2008 -0600
13045 NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
13047 This caused the operation to be needlessly repeated if there were
13048 no bad blocks and no errors.
13050 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
13051 Signed-off-by: Scott Wood <scottwood@freescale.com>
13053 commit 89295028e7d8f7a524f485328279d72fdb102385
13054 Author: Michal Simek <monstr@monstr.eu>
13055 Date: Mon Nov 24 12:09:50 2008 +0100
13057 ppc4xx: ml300 remove Xilinx BSP from ml300 folder
13059 This BSP should be outside u-boot source tree.
13060 The second reason is that xilinx ppc405 was moved to generic platform.
13062 Signed-off-by: Michal Simek <monstr@monstr.eu>
13063 Signed-off-by: Stefan Roese <sr@denx.de>
13065 commit 24eea623d4974a169026a975ba12fb23d48154b1
13066 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13067 Date: Mon Nov 24 15:11:10 2008 +0100
13069 ppc4xx: Remove unused features
13071 This patch disables some unused features from the PCI405 configuration
13072 to keep U-Boot image size below 192k.
13074 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13075 Signed-off-by: Stefan Roese <sr@denx.de>
13077 commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
13078 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13079 Date: Mon Nov 24 15:11:09 2008 +0100
13081 ppc4xx: Use correct io accessors for PCI405
13083 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13084 Signed-off-by: Stefan Roese <sr@denx.de>
13086 commit 348c849d86a6f0785752b9bc497a34658713d1d1
13087 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13088 Date: Mon Nov 24 15:11:08 2008 +0100
13090 ppc4xx: Remove unused code from PCI405 code
13092 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13093 Signed-off-by: Stefan Roese <sr@denx.de>
13095 commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
13096 Author: Heiko Schocher <hs@denx.de>
13097 Date: Thu Nov 20 09:59:09 2008 +0100
13099 powerpc, keymile boards: extract identical config options
13101 This patch extracts the identical config options for the
13102 keymile boards mgcoge, mgsuvd and kmeter1 in a new
13103 common config file keymile-common.h.
13105 Signed-off-by: Heiko Schocher <hs@denx.de>
13106 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13108 commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
13109 Author: Heiko Schocher <hs@denx.de>
13110 Date: Fri Nov 21 08:29:40 2008 +0100
13112 powerpc: keymile: Add a check for the PIGGY debug board
13114 Check the presence of the PIGGY on the keymile boards mgcoge,
13115 mgsuvd and kmeter1. If the PIGGY is not present, dont register
13116 this Ethernet device.
13118 Signed-off-by: Heiko Schocher <hs@denx.de>
13119 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13121 commit 58c696eed839af894e0265064669c402dc28b371
13122 Author: Wolfgang Denk <wd@xpert.denx.de>
13123 Date: Mon Nov 24 21:50:59 2008 +0100
13125 AT91RM9200DK: fix broken boot from NOR flash
13127 Signed-off-by: Wolfgang Denk <wd@denx.de>
13129 commit 8052352f20b33bef8f9872fc983eac73d4693c38
13130 Author: Jens Scharsig <esw@bus-elektronik.de>
13131 Date: Tue Nov 18 10:48:46 2008 +0100
13133 at91rm9200: fix broken boot from nor flash
13135 This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
13136 CONFIG_AT91RM9200 is defined and nor preloader is used.
13138 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
13140 commit 25ea652e907516a283b38237e83712a918f125d7
13141 Author: Piotr Ziecik <kosmo@semihalf.com>
13142 Date: Mon Nov 17 15:58:00 2008 +0100
13144 UBI: Add proof-of-concept CFI flash support
13146 With this patch UBI can be used on CFI flash chips.
13148 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
13149 Signed-off-by: Stefan Roese <sr@denx.de>
13151 commit e6a7edbc1778d27431ac663b40a71dafa5d20578
13152 Author: Piotr Ziecik <kosmo@semihalf.com>
13153 Date: Mon Nov 17 15:57:59 2008 +0100
13155 mtd: Remove a printf() from add_mtd_device().
13157 Remove a printf() from add_mtd_device(), which produces spurious output.
13159 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
13160 Signed-off-by: Stefan Roese <sr@denx.de>
13162 commit 91809ed51d8327a8dbbf29aa98a091154c282171
13163 Author: Piotr Ziecik <kosmo@semihalf.com>
13164 Date: Mon Nov 17 15:57:58 2008 +0100
13166 cfi-mtd: Add cfi-mtd driver.
13168 Add cfi-mtd driver, which exports CFI flash to MTD layer.
13169 This allows CFI flash devices to be used from MTD layer.
13171 Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
13172 option. Initialization is done by calling cfi_mtd_init() from
13175 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
13176 Signed-off-by: Stefan Roese <sr@denx.de>
13178 commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
13179 Author: Piotr Ziecik <kosmo@semihalf.com>
13180 Date: Mon Nov 17 15:49:32 2008 +0100
13182 cfi_flash: Add interface for flash verbosity control
13184 Add interface for flash verbosity control. It allows
13185 to disable output from low-level flash API. It is useful
13186 when calling these low-level functions from context other
13187 than flash commands (for example the MTD/CFI interface
13190 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
13191 Signed-off-by: Stefan Roese <sr@denx.de>
13193 commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
13194 Author: Piotr Ziecik <kosmo@semihalf.com>
13195 Date: Thu Nov 20 15:17:38 2008 +0100
13197 cfi_flash: Export flash_sector_size() function.
13199 Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
13200 so that it can be used in the upcoming cfi-mtd driver.
13202 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
13203 Signed-off-by: Stefan Roese <sr@denx.de>
13205 commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
13206 Author: Stefan Roese <sr@denx.de>
13207 Date: Mon Nov 17 14:45:22 2008 +0100
13209 cfi_flash: Make all flash access functions weak
13211 This patch defines all flash access functions as weak so that
13212 they can be overridden by board specific versions.
13214 This will be used by the upcoming VCTH board support where the NOR
13215 FLASH unfortunately can't be accessed memory-mapped. Special
13216 accessor functions are needed here.
13218 To enable this weak functions you need to define
13219 CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
13220 Otherwise the "old" default functions will be used resulting
13223 Signed-off-by: Stefan Roese <sr@denx.de>
13224 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13226 commit a5c4067017631d903e1afa6ad615f0ce19fea517
13227 Author: Stefan Roese <sr@denx.de>
13228 Date: Mon Nov 24 08:31:16 2008 +0100
13230 UBI: Change parsing of size in commands to default to hex
13232 Currently the size parameters of the UBI commands (e.g. "ubi write") are
13233 decoded as decimal instead of hex as default. This patch now interprets
13234 all these values consistantly as hex, as all other standard U-Boot commands
13237 Signed-off-by: Stefan Roese <sr@denx.de>
13239 commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
13240 Author: Stefan Roese <sr@denx.de>
13241 Date: Fri Nov 21 13:06:06 2008 +0100
13243 ppc4xx: ML2 shouldn't include the 4xx EMAC driver
13245 Signed-off-by: Stefan Roese <sr@denx.de>
13247 commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
13248 Author: Yuri Tikhonov <yur@emcraft.com>
13249 Date: Fri Nov 14 16:19:19 2008 +0300
13251 ppc4xx: katmai: Change default config
13253 This patch enables support for EXT2, and increases the
13254 CONFIG_SYS_BOOTMAPSZ size for the default configuration
13255 of the katmai boards to use them as the RAID-reference
13258 EXT2 enabling allows one to boot kernels from the EXT2
13259 formatted Compact Flash cards.
13261 CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
13262 Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
13263 the memory area with DTB file (which is placed at the
13264 end of the bootmap area) will turn out to be overlapped
13265 with the BSS segment of the 256KB kernel, and zeroed
13266 in early_init() of Linux.
13268 Actually, increasing of the bootmap size could be done
13269 via setting of the bootm_size U-Boot variable, but it looks
13270 like the current U-Boot implementation have some bootm_size-
13271 related functionality lost. In many places through the U-Boot
13272 code the CONFIG_SYS_BOOTMAPSZ definition is used directly
13273 (instead of trying to read the corresponding value from the
13274 environment). The same is truth for the boot_jump_linux()
13275 function in lib_ppc/bootm.c, where U-Boot transfers control
13276 to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
13277 value to the booting kernel.
13279 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
13280 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
13281 Signed-off-by: Stefan Roese <sr@denx.de>
13283 commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
13284 Author: Dave Mitchell <dmitch71@gmail.com>
13285 Date: Thu Nov 20 14:09:50 2008 -0600
13287 ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
13289 Expanded OCM TLB to allow access to 64K OCM as well as 256K of
13292 Adjusted internal SRAM initialization to match updated user
13293 manual recommendation.
13295 OCM & ISRAM are now mapped as follows:
13296 physical virtual size
13297 ISRAM 0x4_0000_0000 0xE300_0000 256k
13298 OCM 0x4_0004_0000 0xE304_0000 64k
13300 A single TLB was used for this mapping.
13302 Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
13303 Signed-off-by: Stefan Roese <sr@denx.de>
13305 commit b14ca4b61a681f75f3125676e09d7ce6af66e927
13306 Author: Dave Mitchell <dmitch71@gmail.com>
13307 Date: Thu Nov 20 14:00:49 2008 -0600
13309 ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
13311 Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
13312 L2 cache DCRs from ppc440.h to this new header.
13314 Also converted these DCR defines from lowercase to uppercase and
13315 modified referencing modules to use them.
13317 Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
13318 Signed-off-by: Stefan Roese <sr@denx.de>
13320 commit 711e2b2af820d21d9931d4cf8057d3894600fd54
13321 Author: Steven A. Falco <sfalco@harris.com>
13322 Date: Thu Nov 20 14:37:57 2008 -0500
13324 ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
13326 The definitions of bits in SDR_CFG are incorrect, and not used within
13327 U-Boot. Therefore, they can be removed.
13329 The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
13330 and are unused, so they can be removed too.
13332 A definition for SDR0_DDRCFG is added.
13334 Signed-off-by: Steven A. Falco <sfalco@harris.com>
13335 Signed-off-by: Stefan Roese <sr@denx.de>
13337 commit e23c7c95a96eb0f068efe5c532215a10a1512a95
13338 Author: Dirk Behme <dirk.behme@gmail.com>
13339 Date: Mon Nov 10 20:15:25 2008 +0100
13341 ARM: OMAP: Convert IO macros
13343 Convert IO macros to readx/writex.
13345 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
13347 commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
13348 Author: Ilko Iliev <iliev@ronetix.at>
13349 Date: Sun Nov 9 15:53:14 2008 +0100
13351 lib_arm: do_bootm_linux() - correct a small mistake
13353 This patch corrects a small bug in the "if" condition:
13354 the parameter "flag" is 0 and the "if" condition is always true.
13355 The result is - the boom command doesn't start the kernel.
13356 Affected targets: all arm based.
13358 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
13360 commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
13361 Author: Stelian Pop <stelian@popies.net>
13362 Date: Sun Nov 9 00:14:46 2008 +0100
13364 AT91: Enable PLLB for USB
13366 At least some (old ?) versions of the AT91Bootstrap do not set up the
13367 PLLB correctly to 48 MHz in order to make USB host function correctly.
13369 This patch sets up the PLLB to the same values Linux uses, and makes USB
13370 work ok on the following CPUs:
13375 This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
13376 the relevant AT91CAP9/AT91SAM9 atmel boards.
13378 Signed-off-by: Stelian Pop <stelian@popies.net>
13379 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13381 commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
13382 Author: Stelian Pop <stelian@popies.net>
13383 Date: Fri Nov 7 13:55:14 2008 +0100
13385 AT91: Use AT91_CPU_CLOCK in displays
13387 Introduce AT91_CPU_CLOCK and use it for displaying the CPU
13388 speed in the LCD driver.
13390 Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
13391 corresponding board clocks.
13393 Signed-off-by: Stelian Pop <stelian@popies.net>
13395 commit fed36ac5ae613773b6cd90e61e292c45440e10c8
13396 Author: Heiko Schocher <hs@denx.de>
13397 Date: Thu Nov 20 09:57:47 2008 +0100
13399 powerpc: 83xx: add support for the kmeter1 board
13401 This patch adds support for the kmeter1 board from Keymile,
13402 based on a Freescale MPC8360 CPU.
13404 - serial console on UART 1
13407 - Ethernet RMII Mode over UCC4
13410 Signed-off-by: Heiko Schocher <hs@denx.de>
13411 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13413 commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
13414 Author: Stefan Roese <sr@denx.de>
13415 Date: Thu Nov 20 11:46:20 2008 +0100
13417 ppc4xx: Clear all potentially pending exceptions in MCSR
13419 This is needed on Canyonlands which still has an exception pending
13420 while running relocate_code(). This leads to a failure after trap_init()
13421 is moved to the top of board_init_r().
13423 Signed-off-by: Stefan Roese <sr@denx.de>
13425 commit facdad5f2602e899a01746916beddbf9e856b5ee
13426 Author: Heiko Schocher <hs@denx.de>
13427 Date: Wed Nov 19 10:10:30 2008 +0100
13429 powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
13431 Signed-off-by: Heiko Schocher <hs@denx.de>
13432 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13434 commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
13435 Author: Howard Gregory <Greg.Howard@freescale.com>
13436 Date: Tue Nov 4 14:55:33 2008 +0800
13438 mpc83xx: Improve the performance of DDR memory
13440 modify the CAS timings. my understanding is that these
13441 settings decrease various wait times in the DDR interface.
13442 Because these wait times are in clock cycles, and the DDR
13443 clock on the 8315 RDB runs slower than on some other 83xx
13444 platforms, we can dial down these values without a problem,
13445 thereby decreasing the latency of memory a little.
13447 Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
13448 Signed-off-by: Dave Liu <daveliu@freescale.com>
13449 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13451 commit 8000b086b33a5a81f3f390f37e178db7956dc08b
13452 Author: Kyungmin Park <kyungmin.park@samsung.com>
13453 Date: Fri Oct 24 14:55:33 2008 +0200
13455 ARM: Add Apollon UBI support
13457 To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
13460 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13461 Signed-off-by: Stefan Roese <sr@denx.de>
13463 commit 694a0b3f1c0accd0de94b89555155d69f8022824
13464 Author: Kyungmin Park <kyungmin.park@samsung.com>
13465 Date: Wed Nov 19 11:47:05 2008 +0100
13467 UBI: Add UBI command support
13469 This patch adds these UBI commands:
13471 ubi part [nand|onenand] [part] - Show or set current partition
13472 ubi info [l[ayout]] -Display volume and UBI layout information
13473 ubi create[vol] volume [size] [type] - Create volume name with size
13474 ubi write[vol] address volume size - Write volume from address with size
13475 ubi read[vol] address volume [size] - Read volume to address with size
13476 ubi remove[vol] volume - Remove volume
13478 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13479 Signed-off-by: Stefan Roese <sr@denx.de>
13481 commit 58be3a1056d88c6d05f3e914389282807e69923a
13482 Author: Kyungmin Park <kyungmin.park@samsung.com>
13483 Date: Wed Nov 19 16:38:24 2008 +0100
13485 UBI: Add basic UBI support to U-Boot (Part 8/8)
13487 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13488 It's based on the Linux UBI version and basically has a "OS"
13489 translation wrapper that defines most Linux specific calls
13490 (spin_lock() etc.) into no-ops. Some source code parts have been
13491 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13492 this version with the Linux version and simplifies future UBI
13493 ports/bug-fixes from the Linux version.
13495 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13496 Signed-off-by: Stefan Roese <sr@denx.de>
13498 commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
13499 Author: Kyungmin Park <kyungmin.park@samsung.com>
13500 Date: Wed Nov 19 16:36:36 2008 +0100
13502 UBI: Add basic UBI support to U-Boot (Part 7/8)
13504 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13505 It's based on the Linux UBI version and basically has a "OS"
13506 translation wrapper that defines most Linux specific calls
13507 (spin_lock() etc.) into no-ops. Some source code parts have been
13508 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13509 this version with the Linux version and simplifies future UBI
13510 ports/bug-fixes from the Linux version.
13512 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13513 Signed-off-by: Stefan Roese <sr@denx.de>
13515 commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
13516 Author: Kyungmin Park <kyungmin.park@samsung.com>
13517 Date: Wed Nov 19 16:32:36 2008 +0100
13519 UBI: Add basic UBI support to U-Boot (Part 6/8)
13521 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13522 It's based on the Linux UBI version and basically has a "OS"
13523 translation wrapper that defines most Linux specific calls
13524 (spin_lock() etc.) into no-ops. Some source code parts have been
13525 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13526 this version with the Linux version and simplifies future UBI
13527 ports/bug-fixes from the Linux version.
13529 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13530 Signed-off-by: Stefan Roese <sr@denx.de>
13532 commit c91a719daa331b5856109313371e4ece5ec06d96
13533 Author: Kyungmin Park <kyungmin.park@samsung.com>
13534 Date: Wed Nov 19 16:28:06 2008 +0100
13536 UBI: Add basic UBI support to U-Boot (Part 5/8)
13538 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13539 It's based on the Linux UBI version and basically has a "OS"
13540 translation wrapper that defines most Linux specific calls
13541 (spin_lock() etc.) into no-ops. Some source code parts have been
13542 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13543 this version with the Linux version and simplifies future UBI
13544 ports/bug-fixes from the Linux version.
13546 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13547 Signed-off-by: Stefan Roese <sr@denx.de>
13549 commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
13550 Author: Kyungmin Park <kyungmin.park@samsung.com>
13551 Date: Wed Nov 19 16:27:23 2008 +0100
13553 UBI: Add basic UBI support to U-Boot (Part 4/8)
13555 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13556 It's based on the Linux UBI version and basically has a "OS"
13557 translation wrapper that defines most Linux specific calls
13558 (spin_lock() etc.) into no-ops. Some source code parts have been
13559 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13560 this version with the Linux version and simplifies future UBI
13561 ports/bug-fixes from the Linux version.
13563 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13564 Signed-off-by: Stefan Roese <sr@denx.de>
13566 commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
13567 Author: Kyungmin Park <kyungmin.park@samsung.com>
13568 Date: Wed Nov 19 16:26:54 2008 +0100
13570 UBI: Add basic UBI support to U-Boot (Part 3/8)
13572 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13573 It's based on the Linux UBI version and basically has a "OS"
13574 translation wrapper that defines most Linux specific calls
13575 (spin_lock() etc.) into no-ops. Some source code parts have been
13576 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13577 this version with the Linux version and simplifies future UBI
13578 ports/bug-fixes from the Linux version.
13580 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13581 Signed-off-by: Stefan Roese <sr@denx.de>
13583 commit 961df83361aff9a14f226214224eb8a06e05ba24
13584 Author: Kyungmin Park <kyungmin.park@samsung.com>
13585 Date: Wed Nov 19 16:25:44 2008 +0100
13587 UBI: Add basic UBI support to U-Boot (Part 2/8)
13589 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13590 It's based on the Linux UBI version and basically has a "OS"
13591 translation wrapper that defines most Linux specific calls
13592 (spin_lock() etc.) into no-ops. Some source code parts have been
13593 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13594 this version with the Linux version and simplifies future UBI
13595 ports/bug-fixes from the Linux version.
13597 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13598 Signed-off-by: Stefan Roese <sr@denx.de>
13600 commit f399d4a281713d5ef2d764f05d545fe61e3bd569
13601 Author: Kyungmin Park <kyungmin.park@samsung.com>
13602 Date: Wed Nov 19 16:23:06 2008 +0100
13604 UBI: Add basic UBI support to U-Boot (Part 1/8)
13606 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
13607 It's based on the Linux UBI version and basically has a "OS"
13608 translation wrapper that defines most Linux specific calls
13609 (spin_lock() etc.) into no-ops. Some source code parts have been
13610 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
13611 this version with the Linux version and simplifies future UBI
13612 ports/bug-fixes from the Linux version.
13614 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13615 Signed-off-by: Stefan Roese <sr@denx.de>
13617 commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
13618 Author: Kyungmin Park <kyungmin.park@samsung.com>
13619 Date: Wed Nov 19 16:20:36 2008 +0100
13621 MTD: Add MTD paritioning infrastructure
13623 This MTD part infrastructure will be used by the upcoming
13626 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13627 Signed-off-by: Stefan Roese <sr@denx.de>
13629 commit 9b827cf1720acda2473afa516956eab6f7cca9a1
13630 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
13631 Date: Thu Oct 16 22:54:03 2008 +0530
13633 Align end of bss by 4 bytes
13635 Most of the bss initialization loop increments 4 bytes
13636 at a time. And the loop end is checked for an 'equal'
13637 condition. Make the bss end address aligned by 4, so
13638 that the loop will end as expected.
13640 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
13641 Signed-off-by: Wolfgang Denk <wd@denx.de>
13643 commit 3f510db522d160179dff3ddcce9b18f6241c2c24
13644 Author: Becky Bruce <becky.bruce@freescale.com>
13645 Date: Mon Nov 10 19:45:35 2008 -0600
13647 mpc8641: fix address-cells default in old .dts detection
13649 address-cells defaults to 2, not 1; so in the unlikely
13650 event that it isn't specified, this patch is required
13651 for correct operation.
13653 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13655 commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
13656 Author: Becky Bruce <becky.bruce@freescale.com>
13657 Date: Fri Oct 31 17:14:39 2008 -0500
13659 lib_ppc: Move trap_init to occur earlier
13661 Doing trap_init immediately once we're running from RAM
13662 means we're no longer dependent on the physical location of
13663 the flash on non-BookE platforms. Before trap_init, those
13664 platforms switch to real mode and go to 0xfff00100 on exception.
13665 After the switch, they go to 0x00000100 This makes it easier to
13666 move the flash location.
13668 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13670 commit d52082b12c6e545705a19433a2f4142526536189
13671 Author: Becky Bruce <becky.bruce@freescale.com>
13672 Date: Fri Nov 7 13:46:19 2008 -0600
13674 mpc8641: Try to detect old .dts files
13676 Since we've changed the memory map of the board, be nice and
13677 add some checking to try to catch out-of-date .dts files. We do
13678 this by checking the CCSRBAR location in the .dts and comparing
13679 it to the CCSRBAR location in u-boot. If they don't match, a
13680 warning msg is printed. This isn't foolproof, but it's simple and
13681 will catch most of the cases where an out-of-date .dts is present,
13682 including all of the cases where a new u-boot is used with an old
13683 standard MPC8641 .dts file as supplied with Linux.
13685 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13687 commit 8db0400a27839f91c047dcb83f4a0f09e054a180
13688 Author: Becky Bruce <becky.bruce@freescale.com>
13689 Date: Thu Nov 6 13:04:09 2008 -0600
13691 toplevel Makefile: Add MPC8641HPCN_36BIT target
13693 This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
13695 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13697 commit 3111d32c494e8251b90917447796a7206b757e1e
13698 Author: Becky Bruce <becky.bruce@freescale.com>
13699 Date: Thu Nov 6 17:37:35 2008 -0600
13701 mpc8641: Support 36-bit physical addressing
13703 This patch creates a memory map with all the devices
13704 in 36-bit physical space, in addition to the 32-bit map.
13705 The CCSR relocation is moved (again, sorry) to
13706 allow for the physical address to be 36 bits - this
13707 requires translation to be enabled. With 36-bit physical
13708 addressing enabled, we are no longer running with VA=PA
13709 translations. This means we have to distinguish between
13710 the two in the config file. The existing region name is
13711 used to indicate the virtual address, and a _PHYS variety
13712 is created to represent the physical address.
13714 Large physical addressing is not enabled by default.
13715 Set CONFIG_PHYS_64BIT in the config file to turn this on.
13717 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13719 commit c759a01a0022de9378a3a761f49786f87684c916
13720 Author: Becky Bruce <becky.bruce@freescale.com>
13721 Date: Thu Nov 6 17:36:04 2008 -0600
13723 mpc8641: Change 32-bit memory map
13725 The memory map on the 8641hpcn is modified to look more like
13726 the 85xx boards; this is a step towards a more standardized
13727 layout going forward. As part of this change, we now relocate
13730 The regions for some of the mappings were far larger than they
13731 needed to be. I have reduced the mappings to match the
13732 actual sizes supported by the hardware.
13734 In addition I have removed the comments at the head
13735 of the BAT blocks in the config file, rather than updating
13736 them. These get horribly out of date, and it's a simple
13737 matter to look at the defines to see what they are set to
13738 since everything is right here in the same file.
13740 Documentation has been changed to reflect the new map, as this
13741 change is user visible, and affects the OS which runs post-uboot.
13743 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13745 commit bf9a8c34309ed9276258295db9e9212aabb2531a
13746 Author: Becky Bruce <becky.bruce@freescale.com>
13747 Date: Wed Nov 5 14:55:35 2008 -0600
13749 mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
13751 We define CONFIG_MONITOR_BASE_EARLY to define the initial location
13752 of the bootpage in flash. Use this to create an early mapping
13753 definition for the FLASH, and change the early_bats code to use this.
13755 This change facilitates the relocation of the flash since the early
13756 mappings are no longer tied to the final location of the flash.
13758 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13760 commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
13761 Author: Becky Bruce <becky.bruce@freescale.com>
13762 Date: Wed Nov 5 14:55:34 2008 -0600
13764 mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
13766 Using a mtmsr/blr means that you have to be executing at the
13767 same virtual address once you enable translation. This is
13768 unnecessarily restrictive, and is not really how this is
13769 usually done. Change it to use the more common mtspr SRR0/SRR1
13772 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13774 commit 6bf98b1362f0cb237620355ed3e6762fff82388d
13775 Author: Becky Bruce <becky.bruce@freescale.com>
13776 Date: Wed Nov 5 14:55:33 2008 -0600
13778 mpc8641: make DIAG_ADDR == FLASH_BASE
13780 Currently, that's what it is, but it's hardcoded.
13782 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13784 commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
13785 Author: Becky Bruce <becky.bruce@freescale.com>
13786 Date: Wed Nov 5 14:55:32 2008 -0600
13788 mpc8641: Drop imaginary second flash bank, map 8MB
13790 There's a lot of setup and foo for the second flash
13791 bank. The problem is, this board doesn't actually have one.
13792 Clean this up. Also, the flash is 8M in size. Get rid
13793 of the confusing aliased overmapping, and just map 8M.
13795 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13797 commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
13798 Author: Becky Bruce <becky.bruce@freescale.com>
13799 Date: Wed Nov 5 14:55:31 2008 -0600
13801 mpc8641: only define CONFIG_ENV_SIZE once
13803 It's currently defined twice inside in an if/else block, but
13804 both halves set the same value. Move the define outside
13807 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13809 commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
13810 Author: Becky Bruce <becky.bruce@freescale.com>
13811 Date: Wed Nov 5 14:55:30 2008 -0600
13813 mpc86xx: Move setup_bats into cpu_init_f
13815 In order to later allow for a physical relocation of the
13816 flash, setup_bats, which sets up the final BAT mapping
13817 for the board, needs to happen *after* init_laws().
13818 Otherwise, there will be no window programmed for the flash
13819 at the new physical location at the point when we change
13820 the mmu translation.
13822 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13824 commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
13825 Author: Becky Bruce <becky.bruce@freescale.com>
13826 Date: Wed Nov 5 14:55:29 2008 -0600
13828 mpc8641: Remove extra "0" from BR2 define
13830 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13832 commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
13833 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
13834 Date: Thu Oct 23 09:08:18 2008 -0400
13836 drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
13838 Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
13839 This adds support for PHY-less MAC connections to the UEC.
13841 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
13842 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13844 commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
13845 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13846 Date: Thu Oct 23 16:27:24 2008 +0000
13848 ColdFire: Add mii driver in drivers/net
13850 All CF platforms' mii.c are consolidated into one
13852 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13853 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13855 commit 25a859066b3af1070eb69f12022113c0a91bd813
13856 Author: Ben Warren <biggerbadderben@gmail.com>
13857 Date: Mon Oct 27 23:53:17 2008 -0700
13859 Moved initialization of PPC4xx EMAC to cpu_eth_init()
13861 Removed initialization of the driver from net/eth.c
13863 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13864 Acked-by: Stefan Roese <sr@denx.de>
13866 commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
13867 Author: Ben Warren <biggerbadderben@gmail.com>
13868 Date: Sun Nov 9 21:29:23 2008 -0800
13870 Moved PPC4xx EMAC driver to drivers/net
13872 Also changed path in all linker scripts that reference this driver
13874 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13875 Acked-by: Stefan Roese <sr@denx.de>
13877 commit 96e21f86e8266ed40759e5495ee461265d7f6d28
13878 Author: Ben Warren <biggerbadderben@gmail.com>
13879 Date: Mon Oct 27 23:50:15 2008 -0700
13881 Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
13883 All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
13885 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13886 Acked-by: Stefan Roese <sr@denx.de>
13888 commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
13889 Author: Ben Warren <biggerbadderben@gmail.com>
13890 Date: Thu Oct 23 22:02:49 2008 -0700
13892 Moved initialization of MPC8XX SCC to cpu_eth_init()
13894 Removed initialization of the driver from net/eth.c
13896 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13898 commit a9bec96d6359ac9f90a852962bf3040cad9e0256
13899 Author: Ben Warren <biggerbadderben@gmail.com>
13900 Date: Wed Oct 22 23:47:51 2008 -0700
13902 Moved initialization of MPC8220 FEC to cpu_eth_init()
13904 Removed initialization of the driver from net/eth.c
13906 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13908 commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
13909 Author: Ben Warren <biggerbadderben@gmail.com>
13910 Date: Wed Oct 22 23:32:48 2008 -0700
13912 Moved initialization of QE Ethernet controller to cpu_eth_init()
13914 Removed initialization of the driver from net/eth.c
13916 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13918 commit 3456a148276d5494b53ee40242efb6462d163504
13919 Author: Ben Warren <biggerbadderben@gmail.com>
13920 Date: Wed Oct 22 23:20:29 2008 -0700
13922 Moved initialization of FCC Ethernet controller to cpu_eth_init
13925 Several MPC8xx boards
13926 Several MPC8260/MPC8272 boards
13927 Several MPC85xx boards
13929 Removed initialization of the driver from net/eth.c
13931 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13933 commit 62e15b497f5c6334c059512678c8db7940ae4c61
13934 Author: Ben Warren <biggerbadderben@gmail.com>
13935 Date: Thu Oct 30 22:15:35 2008 -0700
13937 Fix typo in cpu/mpc85xx/cpu.c
13939 CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
13941 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13943 commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
13944 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13945 Date: Sun Oct 19 12:08:50 2008 +0900
13947 net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
13949 This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
13950 as a part of ongoing eth_initialize cleanup work. The function ret value
13951 is also fixed as it should be negative on fail.
13953 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13954 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13956 commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
13957 Author: Ben Warren <biggerbadderben@gmail.com>
13958 Date: Fri Sep 5 01:55:22 2008 -0400
13960 Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
13962 Also, removed the driver initialization from net/eth.c
13964 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13966 commit f2a7806fc23e82d30c8548911369e0c530607354
13967 Author: Clive Stubbings <uboot@xentech.co.uk>
13968 Date: Mon Oct 27 15:05:00 2008 +0000
13970 xilinx_emaclite buffer overrun
13972 Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
13973 PKTSIZE_ALIGN bytes long.
13975 Acked-by: Michal Simek <monstr@monstr.eu>
13977 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13979 commit 0115b1953718a2969f6469d3d5da51ba11e12d42
13980 Author: richardretanubun <richardretanubun@ruggedcom.com>
13981 Date: Fri Sep 26 08:59:12 2008 -0400
13983 NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
13985 The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
13986 This patch makes these function use the devname argument that is passed in to
13987 allow access to the phy registers of other devices in devlist[].
13989 Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
13991 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13993 commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
13994 Author: richardretanubun <richardretanubun@ruggedcom.com>
13995 Date: Mon Oct 6 15:31:43 2008 -0400
13997 Adds two more ethernet interface to 83xx
13999 Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
14000 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
14001 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14003 commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
14004 Author: Stelian Pop <stelian@popies.net>
14005 Date: Fri Nov 7 13:54:31 2008 +0100
14007 AT91: Replace AT91_BASE_EMAC by the board specific values.
14009 AT91_BASE_EMAC is never used outside the board specific files,
14010 so replace its usage by the board specific AT91xxx_BASE_EMAC.
14012 Signed-off-by: Stelian Pop <stelian@popies.net>
14013 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14015 commit c91e17affa175ce06afa89b04752301eb4a61666
14016 Author: Stelian Pop <stelian@popies.net>
14017 Date: Fri Nov 7 12:09:21 2008 +0100
14019 AT91: Replace (undefined) AT91_ID_US* by the board specific values.
14021 AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
14022 Since they are never used outside the board specific files, they can
14023 be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
14026 Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
14028 Signed-off-by: Stelian Pop <stelian@popies.net>
14029 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14031 commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
14032 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14033 Date: Sat Nov 1 10:47:59 2008 +0100
14035 Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
14037 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14039 commit 1079432e04ccf71aa3684181186182cd63512f19
14040 Author: Sergey Lapin <slapin@ossfans.org>
14041 Date: Fri Oct 31 12:28:43 2008 +0100
14043 Custom AFEB9260 board support
14045 This patch provides support for AFEB9260 board, a product of
14046 OpenSource hardware and software. Some commertial projects
14047 are made with this design. A board is basically AT91SAM9260-EK
14048 with some modifications and different peripherals and different
14049 parts used. Main purpose of this project is to gain experience in
14051 More info: http://groups.google.com/group/arm9fpga-evolution-board
14052 (In Russian only, sorry).
14053 Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
14055 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
14057 commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
14058 Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
14059 Date: Tue Oct 21 13:17:16 2008 +0900
14061 Change to use "do_div" macro
14063 Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
14065 commit e352495318d8056a00faa21b633b3e4374bfbf52
14066 Author: Roman Mashak <romez777@gmail.com>
14067 Date: Wed Oct 22 16:00:26 2008 -0400
14069 ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
14071 OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
14072 It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
14074 Signed-off-by: Roman Mashak <romez777@gmail.com>
14076 commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
14077 Author: Roman Mashak <romez777@gmail.com>
14078 Date: Tue Oct 21 03:01:41 2008 -0700
14080 ARM/Versatile port: Removed unused functions
14082 Removal of never used functions.
14084 Signed-off-by: Roman Mashak <romez777@gmail.com>
14086 commit 1266df887781c779deaf6d05eea2ef90a470cb34
14087 Author: Becky Bruce <becky.bruce@freescale.com>
14088 Date: Mon Nov 3 15:44:01 2008 -0600
14090 powerpc: change 86xx SMP boot method
14092 We put the bootpg for the secondary cpus into memory and use
14093 BPTR to get to it. This is a step towards converting to the
14094 ePAPR boot methodology. Also, the code is written to
14095 deal properly with more than 4GB of RAM.
14097 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14099 commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
14100 Author: Becky Bruce <becky.bruce@freescale.com>
14101 Date: Fri Oct 31 17:13:49 2008 -0500
14103 8641HPCN: Config file cleanup
14105 There are several items in the config file that were hardcoded
14106 but that should really be based on other config options, since
14107 the regions are contiguous and depend on being so. This cleans
14108 that up a bit. Also, add BR_PHYS_ADDR() macro to convert
14109 addresses into the proper format for BR registers.
14111 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14113 commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
14114 Author: Becky Bruce <becky.bruce@freescale.com>
14115 Date: Fri Oct 31 17:13:32 2008 -0500
14117 86xx: Make dram_size a phys_size_t
14119 It's currently a long and should be phys_size_t.
14121 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14123 commit 104992fc541302a6bac74448e01e7fdad20abca0
14124 Author: Becky Bruce <becky.bruce@freescale.com>
14125 Date: Sun Nov 2 18:19:32 2008 -0600
14127 powerpc 86xx: Handle CCSR relocation earlier
14129 Currently, the CCSR gets relocated while translation is
14130 enabled, meaning we need 2 BAT translations to get to both the
14131 old location and the new location. Also, the DEFAULT
14132 CCSR location has a dependency on the BAT that maps the
14133 FLASH region. Moving the relocation removes this unnecessary
14134 dependency. This makes it easier and more intutive to
14135 modify the board's memory map.
14137 Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
14138 BAT for CCSR space.
14140 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14142 commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
14143 Author: Becky Bruce <becky.bruce@freescale.com>
14144 Date: Fri Oct 31 17:14:14 2008 -0500
14146 mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
14148 You can't actually have both, and with some coming changes to
14149 change the memory map for the board and support 36-bit physical,
14150 we need the extra BAT that is being consumed by having both.
14152 I also make non-PCI configs build cleanly, for the sake of sanity.
14154 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14156 commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
14157 Author: Becky Bruce <becky.bruce@freescale.com>
14158 Date: Fri Oct 31 17:14:00 2008 -0500
14160 mpc8641: Stop supporting non-PCI_PNP configs
14162 We don't actually ever do this, remove the code so we
14163 can stop maintaining it.
14165 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14167 commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
14168 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14169 Date: Fri Oct 24 12:59:12 2008 +0000
14171 ColdFire: Fix M5329EVB and M5373EVB nand issue
14173 Fix compilation issue caused by a few mismatches.
14174 Provide proper nand chip select enable/disable in
14175 nand_hwcontrol() rather than in board_nand_init()
14176 just enable once. Remove redundant local nand driver
14177 functions - nand_read_byte(), nand_write_byte() and
14178 nand_dev_ready() to use common nand driver.
14180 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14182 commit 1b2708442224a551a0b865b52710306333888932
14183 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14184 Date: Wed Oct 22 11:55:30 2008 +0000
14186 ColdFire: Fix compilation error
14188 The error was caused by the change for strmhz() in cpu.c.
14189 A few of them were one extra close parenthesis.
14191 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14193 commit 536e7dac16769954915a484e682a2efb28699133
14194 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14195 Date: Wed Oct 22 11:38:21 2008 +0000
14197 ColdFire: Add MCF5301x CPU and M53017EVB support
14199 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14201 commit a21d0c2cc9add8894d971ab791f4032f077db817
14202 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14203 Date: Tue Oct 21 15:37:02 2008 +0000
14205 ColdFire: Add SBF support for M52277EVB
14207 Add serial boot support
14209 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14211 commit b202816c61042c183fe67d097a5893b0f2dafba0
14212 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14213 Date: Tue Oct 21 14:19:26 2008 +0000
14215 ColdFire: Use CFI driver for M5272C3
14217 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14219 commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
14220 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14221 Date: Tue Oct 21 13:47:54 2008 +0000
14223 ColdFire: Relocate FEC's GPIO and mii functions protocols
14225 Place FEC pin assignments in cpu_init.c from platform's
14228 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14230 commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
14231 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14232 Date: Tue Oct 21 12:15:44 2008 +0000
14234 ColdFire: Remove platforms mii.c file
14236 Will use mcfmii.c driver in drivers/net rather than
14237 keep creating new mii.c for each future platform.
14238 Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
14239 M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
14240 M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
14243 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14245 commit 012522fef3b382469125beb46a315ab4dee02fb0
14246 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14247 Date: Tue Oct 21 10:03:07 2008 +0000
14249 ColdFire: Modules header files cleanup
14251 Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
14252 MDHA, SKHA, INTC, and FlexBus structures and
14253 definitions in immap_5xxx.h to more unify modules
14254 header files. Append DSPI support for m547x_8x.
14255 SSI cleanup. Remove USB Host structure from immap_539.h.
14256 Apply changes to use FlexBus structures in mcf52x2's
14257 cpu_init.c and platform configuration files.
14259 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14261 commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
14262 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14263 Date: Tue Oct 21 08:52:36 2008 +0000
14265 ColdFire: Remove linker file
14267 Each different build for M54455EVB and M5235EVB will
14268 create a u-boot.lds linker file. It is redundant to
14269 keep the u-boot.lds
14271 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14273 commit 0829323073c505556ed5f5073f91adb504584d45
14274 Author: Peter Tyser <ptyser@xes-inc.com>
14275 Date: Fri Oct 31 11:26:44 2008 -0500
14277 ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
14279 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
14281 commit a80b21d5127583171d6e9bc7f722947641898012
14282 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14283 Date: Fri Oct 31 12:12:12 2008 +0100
14285 common/Makefile: create others group for non core, environment and command files
14287 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14289 commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
14290 Author: Wolfgang Denk <wd@denx.de>
14291 Date: Fri Oct 31 01:13:37 2008 +0100
14293 TQM8260: use CFI flash driver instead of custom driver.
14295 Signed-off-by: Wolfgang Denk <wd@denx.de>
14297 commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
14298 Author: Andy Fleming <afleming@freescale.com>
14299 Date: Thu Oct 30 17:35:30 2008 -0500
14301 Consolidate MAX/MIN definitions
14303 There were several, now there is one (two if you count the lower-case
14306 Signed-off-by: Andy Fleming <afleming@freescale.com>
14308 commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
14309 Author: Heiko Schocher <hs@denx.de>
14310 Date: Thu Oct 30 09:23:09 2008 +0100
14312 mgsuvd: remove unused defines in config file.
14314 Signed-off-by: Heiko Schocher <hs@denx.de>
14316 commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
14317 Author: Wolfgang Denk <wd@denx.de>
14318 Date: Sun Nov 2 16:14:22 2008 +0100
14320 Coding Style cleanup, update CHANGELOG
14322 Signed-off-by: Wolfgang Denk <wd@denx.de>
14324 commit a47f957ab523019992fdef857af01bd71c58a4da
14325 Author: Alessandro Rubini <rubini-list@gnudd.com>
14326 Date: Fri Oct 31 22:33:21 2008 +0100
14328 NAND: Allow NAND and OneNAND to coexist
14330 This removes in nand.h code that is verbatim duplicated from bbm.h,
14331 including directly bbm.h in nand.h. The previous state of affairs
14332 prevented compiling code for a board hosting both NAND and OneNAND chips.
14334 Reported-by: Scott Wood <scottwood@freescale.com>
14335 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
14336 Signed-off-by: Scott Wood <scottwood@freescale.com>
14338 commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
14339 Author: Scott Wood <scottwood@freescale.com>
14340 Date: Fri Oct 31 13:51:12 2008 -0500
14342 JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
14344 Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
14345 Signed-off-by: Scott Wood <scottwood@freescale.com>
14347 commit c57fc28947e248fb03c49a28b467686299895055
14348 Author: Jason Jin <Jason.Jin@freescale.com>
14349 Date: Fri Oct 31 05:07:04 2008 -0500
14351 NAND: Add NAND support for MPC8536DS board
14353 This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
14354 for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
14355 It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
14357 Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
14358 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
14359 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14361 commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
14362 Author: Haiying Wang <Haiying.Wang@freescale.com>
14363 Date: Fri Oct 31 05:06:14 2008 -0500
14365 NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
14367 CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
14369 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
14370 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14372 commit 51b572a801be57790fe26adaa530210e7fba59cc
14373 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14374 Date: Fri Oct 24 10:49:48 2008 +0900
14376 sh: rsk7203: Moved rsk7203 board to board/renesas
14378 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14380 commit 58453b00b3ebb26aaa901210023f99504a90bb00
14381 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14382 Date: Fri Oct 24 10:48:31 2008 +0900
14384 sh: MigoR: Moved MigoR board to board/renesas
14386 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14388 commit c1da2a22817ba85b437afa2f4e715e658b219fd1
14389 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14390 Date: Fri Oct 24 10:39:44 2008 +0900
14392 sh: r2dplus: Moved r2dplus board to board/renesas
14394 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14396 commit 78385bf2359d828184d0b3649f7ae6b933420000
14397 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14398 Date: Fri Oct 24 10:36:13 2008 +0900
14400 sh: sh7763rdp: Moved sh7763rdp board to board/renesas
14402 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14404 commit c6525d459c350bfc246ea7826456af77e1e314eb
14405 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14406 Date: Fri Oct 24 10:35:19 2008 +0900
14408 sh: sh7785lcr: Moved sh7785lcr board to board/renesas
14410 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14412 commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
14413 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14414 Date: Fri Oct 24 10:34:21 2008 +0900
14416 sh: r7780mp: Moved r7780mp board to board/renesas
14418 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14420 commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
14421 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14422 Date: Fri Oct 24 10:32:14 2008 +0900
14424 sh: ap325rxa: Moved ap325rxa board to board/renesas
14426 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14428 commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
14429 Author: Wolfgang Denk <wd@xpert.denx.de>
14430 Date: Fri Oct 31 01:12:28 2008 +0100
14432 CFI Driver: Fix "flash not ready" problem
14434 This patch fixes a problem on systems where the NOR flash is attached
14435 to a 64 bit bus. The toggle bit detection in flash_toggle() is based
14436 on the assumption that the same flash address is read twice without
14437 any other interjacent flash accesses. However, on 32 bit systems the
14438 function flash_read64() [as currently implemented] does not perform
14439 an atomic 64 bit read - instead, this is broken down into two 32 bit
14440 read accesses on addresses "addr" and "addr + 4". So instead of
14441 reading a 64 bit value twice from "addr", we see a sequence of 4 32
14442 bit reads from "addr", "addr + 4", "addr", and "addr + 4". The
14443 consequence is that flash_toggle() fails to work.
14445 This patch implements a simple, but somewhat ugly solution, as it
14446 avoids the use of flash_read64() in this critical place (by breaking
14447 it down manually into 32 bit read operations) instead of rewriting
14448 flash_read64() such to perform atomic 64 bit reads as one could
14449 expect. However, such a rewrite would require the use of floating
14450 point load operations, which becomes pretty complex:
14453 set Floating Point Enable bit in MSR;
14454 use "lfd" instruction to perform atomic 64 bit read;
14455 use "stfd" to store value to temporary variable on stack;
14456 load u64 value from temporary variable;
14460 The benefit-cost ratio of such an implementation was considered too
14461 bad to actually attempt this, especially as we can expect that such
14462 an implementation would not only have a bigger memory footprint but
14463 also cause a performance degradation.
14465 Signed-off-by: Wolfgang Denk <wd@denx.de>
14466 Signed-off-by: Stefan Roese <sr@denx.de>
14468 commit cdd4fe63b094d4b767f12ff241d72566b461ee61
14469 Author: Stefan Roese <sr@denx.de>
14470 Date: Fri Oct 31 10:48:08 2008 +0100
14472 ppc4xx: Fix spelling error in MAINTAINERS file
14474 Signed-off-by: Stefan Roese <sr@denx.de>
14476 commit be270798900b75ad9c47c7b79c72f70441196c56
14477 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14478 Date: Tue Oct 28 13:37:00 2008 +0100
14480 ppc4xx: Update PMC440 board support
14482 This patch brings PMC440 board support up to date:
14484 - fix GPIO configuration
14485 - add misc_init_f()
14486 - use better values for usbact variable
14487 - fix USB 2.0 phy reset sequence
14488 - shrink BAR2 to save PCI address space
14491 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14492 Signed-off-by: Stefan Roese <sr@denx.de>
14494 commit 75183b1a7fc04206d9779d13f16e03853d7e965d
14495 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14496 Date: Tue Oct 28 13:36:59 2008 +0100
14498 ppc4xx: Fix PMC440 BSP commands
14500 This patch fixes the PMC440 BSP commands painit and selfreset
14502 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14503 Signed-off-by: Stefan Roese <sr@denx.de>
14505 commit 76b565b69f886d5ae748db65e44f464b0e70d41a
14506 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14507 Date: Tue Oct 28 13:36:58 2008 +0100
14509 ppc4xx: Update PMC440 board configuration
14511 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14512 Signed-off-by: Stefan Roese <sr@denx.de>
14514 commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
14515 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14516 Date: Tue Oct 28 13:36:57 2008 +0100
14518 ppc4xx: Fix esd loadpci command
14520 This patch fixes esd's loadpci command when not all
14521 memory on adapter boards is accessable via PCI.
14523 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14524 Signed-off-by: Stefan Roese <sr@denx.de>
14526 commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
14527 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14528 Date: Tue Oct 28 13:36:56 2008 +0100
14530 ppc4xx: Clean up PMC440 header
14532 -Codingstyle cleanup
14533 -Remove unused GPIO define
14535 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14536 Signed-off-by: Stefan Roese <sr@denx.de>
14538 commit 295133258a44f97a57fb2ec339aecfda11f4db95
14539 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14540 Date: Tue Oct 28 13:36:55 2008 +0100
14542 ppc4xx: Handle other board variant in PMC440 FPGA code
14544 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14545 Signed-off-by: Stefan Roese <sr@denx.de>
14547 commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
14548 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14549 Date: Mon Oct 27 12:35:59 2008 +0100
14551 ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
14553 Xilinx ppc440 and ppc405 have many similarities. This patch merge the
14554 config files of both infrastuctures
14556 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14557 Signed-off-by: Stefan Roese <sr@denx.de>
14559 commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
14560 Author: Stefan Roese <sr@denx.de>
14561 Date: Sat Oct 25 06:45:31 2008 +0200
14563 ppc4xx: Correctly configure the GPIO pin muxing on Arches
14565 Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
14566 pin multiplexing correctly
14568 Signed-off-by: Stefan Roese <sr@denx.de>
14570 commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
14571 Author: Bartlomiej Sieka <tur@semihalf.com>
14572 Date: Thu Oct 30 23:22:04 2008 +0100
14574 Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
14576 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14578 commit 4bc7deee9095f21e243b724ca3d634251c1d5432
14579 Author: David Gibson <david@gibson.dropbear.id.au>
14580 Date: Wed Oct 29 23:27:45 2008 -0500
14582 libfdt: Fix bug in fdt_subnode_offset_namelen()
14584 There's currently an off-by-one bug in fdt_subnode_offset_namelen()
14585 which causes it to keep searching after it's finished the subnodes of
14586 the given parent, and into the subnodes of siblings of the original
14587 node which come after it in the tree.
14589 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
14590 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14592 commit f242a08871839eac081ba5b599af979f3a148a0d
14593 Author: Peter Korsgaard <jacmet@sunsite.dk>
14594 Date: Tue Oct 28 08:26:52 2008 +0100
14596 fdt_resize(): ensure minimum padding
14598 fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
14599 (16 bytes), so make sure that fdt_resize at least adds that much
14600 padding, no matter what the location or size of the fdt is.
14602 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
14603 Acked-by: Andy Fleming <afleming@freescale.com>
14605 commit d685b74c64a38849f1a129b3ab846fbf67dd937e
14606 Author: Dave Liu <daveliu@freescale.com>
14607 Date: Thu Oct 23 21:59:35 2008 +0800
14609 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
14611 The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
14613 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
14615 This is needed in unlock_ram_in_cache() because it is called from C and
14616 will corrupt the small data area anchor that is kept in R2.
14618 lock_ram_in_cache() is modified similarly as good coding practice, but
14619 is not called from C.
14621 Signed-off-by: Nick Spence <nick.spence@freescale.com>
14623 also, the r2 is used as global data pointer.
14625 Signed-off-by: Dave Liu <daveliu@freescale.com>
14627 commit e053ab1903ccae6048ef759025b9f675bba91450
14628 Author: Scott Wood <scottwood@freescale.com>
14629 Date: Tue Oct 28 11:45:04 2008 -0500
14631 mpc83xx pci: Round up memory size in inbound window.
14633 The current calculation will fail to cover all memory if
14634 its size is not a power of two.
14636 Signed-off-by: Scott Wood <scottwood@freescale.com>
14637 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14639 commit 1c671977dc81359628be27ac99c174e76e8069ba
14640 Author: Dave Liu <daveliu@freescale.com>
14641 Date: Thu Oct 23 21:19:13 2008 +0800
14643 86xx: remove the unused definition
14645 Signed-off-by: Dave Liu <daveliu@freescale.com>
14647 commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
14648 Author: Dave Liu <daveliu@freescale.com>
14649 Date: Tue Oct 28 17:47:49 2008 +0800
14651 86xx: remove the redundant r2 global data pointer save
14653 The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
14654 the another global data pointer save, but in fact the
14655 global data pointer will be initialized in the board_init_r,
14656 so remove it such as the 85xx/83xx family.
14658 Signed-off-by: Dave Liu <daveliu@freescale.com>
14659 Acked-by: Kumar Gala <kumar.gala@freescale.com>
14661 commit bd888e9544419665334a6f47f81f34011cea38f3
14662 Author: Dave Liu <daveliu@freescale.com>
14663 Date: Tue Oct 28 17:47:41 2008 +0800
14665 86xx: remove the unused code for 86xx family
14667 I believe these code was copied from 74xx family, but for
14668 86xx, it is unused.
14670 Signed-off-by: Dave Liu <daveliu@freescale.com>
14671 Acked-by: Kumar Gala <kumar.gala@freescale.com>
14673 commit 5ba1ef507402bc5e344dc374203792a40f222e8a
14674 Author: Dave Liu <daveliu@freescale.com>
14675 Date: Tue Oct 28 17:46:35 2008 +0800
14677 86xx: remove the second DDR LAW setting for mpc8641hpcn
14679 The DDR1 LAW will precedence the DDR2 LAW, so remove
14680 the second DDR LAW.
14682 Signed-off-by: Dave Liu <daveliu@freescale.com>
14683 Acked-by: Becky Bruce <becky.bruce@freescale.com>
14685 commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
14686 Author: Dave Liu <daveliu@freescale.com>
14687 Date: Tue Oct 28 17:46:23 2008 +0800
14689 86xx: remove the unused ddr_enable_ecc in the board file
14691 The DDR controller of 86xx processors have the ECC data init
14692 feature, and the new DDR code is using the feature, we don't
14693 need the way with DMA to init memory again.
14695 Signed-off-by: Dave Liu <daveliu@freescale.com>
14696 Acked-by: Kumar Gala <kumar.gala@freescale.com>
14698 commit dc2adad85bf580d65916c940683f6e9671e8a5dd
14699 Author: Dave Liu <daveliu@freescale.com>
14700 Date: Tue Oct 28 17:46:12 2008 +0800
14702 86xx: Move the clear_tlbs before MMU turn on
14704 We must invalidate TLBs before MMU turn on, but
14705 currently the code is not, if there are some stale
14706 TLB entry valid in the TLBs, it will cause strange
14709 Signed-off-by: Dave Liu <daveliu@freescale.com>
14710 Acked-by: Becky Bruce <becky.bruce@freescale.com>
14712 commit 5cdade07b118d07154cb882650f9778cecc8a87c
14713 Author: Scott Wood <scottwood@freescale.com>
14714 Date: Mon Oct 27 15:57:08 2008 -0500
14716 mpc8313erdb: Document NAND boot.
14718 Previously, the documentation claimed that NAND boot is not supported.
14719 This is no longer true.
14721 Signed-off-by: Scott Wood <scottwood@freescale.com>
14723 commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
14724 Author: Scott Wood <scottwood@freescale.com>
14725 Date: Wed Oct 29 14:20:26 2008 -0500
14727 NAND: Properly create JFFS2 cleanmarkers.
14729 As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
14730 command is currently broken, and among other things causes all blocks
14733 This implements it properly using MTD_OOB_AUTO, along with some
14736 Signed-off-by: Scott Wood <scottwood@freescale.com>
14738 commit f7fe57c09866b44692d18c8cf22828bd137ec58d
14739 Author: Scott Wood <scottwood@freescale.com>
14740 Date: Wed Oct 29 13:42:41 2008 -0500
14742 NAND fsl elbc: Set FMR[ECCM] based on page size.
14744 Hardware expects ECCM 0 for small page and ECCM 1 for large page
14745 when booting from NAND, so use those defaults.
14747 Signed-off-by: Scott Wood <scottwood@freescale.com>
14749 commit c013b74975dab0805ef6d369b013230c4e8a660d
14750 Author: Haiying Wang <Haiying.Wang@freescale.com>
14751 Date: Wed Oct 29 13:32:59 2008 -0400
14753 NAND: Add support for MPC8572DS board
14755 This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
14756 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
14759 It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
14760 make room for the increased code size with NAND enabled.
14762 Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
14763 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
14764 Signed-off-by: Scott Wood <scottwood@freescale.com>
14766 commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
14767 Author: Haiying Wang <Haiying.Wang@freescale.com>
14768 Date: Wed Oct 29 11:05:55 2008 -0400
14770 Make Freescale local bus registers available for both 83xx and 85xx.
14772 - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
14773 can be shared by both 83xx and 85xx
14774 - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
14775 files which use lbus83xx_t.
14776 - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
14777 85xx can share them.
14779 Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
14780 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
14781 Signed-off-by: Scott Wood <scottwood@freescale.com>
14783 commit 695c130e4bf75b444720ddfd83aca88f41c046cf
14784 Author: Scott Wood <scottwood@freescale.com>
14785 Date: Mon Oct 27 15:38:30 2008 -0500
14787 NAND: Align right column of the shorthelp with other commands.
14789 I accidentally broke this in when making consistent the partial
14790 alignment of the longhelp.
14792 Signed-off-by: Scott Wood <scottwood@freescale.com>
14794 commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
14795 Author: Karl Beldan <karl.beldan@gmail.com>
14796 Date: Mon Sep 15 16:08:03 2008 +0200
14798 NAND: Reset chip on power-up
14800 Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
14801 The first command sent is NAND_CMD_READID.
14802 Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
14803 Tested with an MT29F4G08AAC.
14805 Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
14806 Signed-off-by: Scott Wood <scottwood@freescale.com>
14808 commit c45912d8abc52de796b9059a58faf7c4166eab58
14809 Author: Scott Wood <scottwood@freescale.com>
14810 Date: Fri Oct 24 16:20:43 2008 -0500
14812 NAND: sync with 2.6.27
14814 This brings the core NAND code up to date with the Linux kernel.
14816 Since there were several drivers in Linux as of the last update that are
14817 not in u-boot, I'm not bringing over new drivers that have been added
14818 since in the absence of an interested party.
14820 I did not update OneNAND since it was recently synced by Kyungmin Park,
14821 and I'm not sure exactly what the common ancestor is.
14823 Signed-off-by: Scott Wood <scottwood@freescale.com>
14825 commit b1d0db1805c3395149777e507b6da53410abac4e
14826 Author: Kumar Gala <galak@kernel.crashing.org>
14827 Date: Tue Oct 21 17:25:47 2008 -0500
14829 bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
14831 Added the ability to config out bootm support for Linux, NetBSD, RTEMS
14833 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14835 commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
14836 Author: Kumar Gala <galak@kernel.crashing.org>
14837 Date: Tue Oct 21 17:25:46 2008 -0500
14839 bootm: support subcommands in linux ppc bootm
14841 Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
14843 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14845 commit 49c3a861d11735838f1f1b11999ce433006dc919
14846 Author: Kumar Gala <galak@kernel.crashing.org>
14847 Date: Tue Oct 21 17:25:45 2008 -0500
14849 bootm: Add subcommands
14851 Add the ability to break the steps of the bootm command into several
14852 subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
14854 This allows us to do things like manipulate device trees before
14855 they are passed to a booting kernel or setup memory for a secondary
14856 core in multicore situations.
14858 Not all OS types support all subcommands (currently only start, loados,
14859 ramdisk, fdt, and go are supported).
14861 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14863 commit be08315933537f061bc1ce61f33a29c56458bbad
14864 Author: Kumar Gala <galak@kernel.crashing.org>
14865 Date: Tue Oct 21 17:25:44 2008 -0500
14867 bootm: Move to using a function pointer table for the boot os function
14869 This removes a bit of code and makes it easier for the upcoming sub bootm
14870 command support to call into the proper OS specific handler.
14872 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14873 Signed-off-by: Wolfgang Denk <wd@denx.de>
14875 commit a369f4a492fa2805d87775d27380f0eeaca35aa6
14876 Author: Graeme Russ <graeme.russ@gmail.com>
14877 Date: Mon Sep 29 23:03:14 2008 +1000
14879 i386: Renamed show_boot_progress in assembler code
14881 Renamed show_boot_progress in assembler init phase to
14882 show_boot_progress_asm to avoid link conflicts with C version
14884 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
14886 commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
14887 Author: Peter Tyser <ptyser@xes-inc.com>
14888 Date: Mon Oct 27 16:42:00 2008 -0500
14890 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
14892 The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
14893 processors have a 3-bit wide IO_SEL field but have the most
14894 significant bit is wired to 0 so this change should not affect
14897 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
14899 commit cd4251624205cb97104f6e32679dc7754934f711
14900 Author: Becky Bruce <becky.bruce@freescale.com>
14901 Date: Mon Oct 27 16:09:42 2008 -0500
14903 powerpc: fix pci window initialization to work with > 4GB DRAM
14905 The existing code has a few errors that need to be fixed in
14906 order to support large RAM sizes. Fix those, and add a
14907 comment to make it clearer.
14909 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14910 Acked-by: Kumar Gala <galak@kernel.crashing.org>
14912 commit 219542a1a66ca017b12860920714a9859b18a5d7
14913 Author: Kumar Gala <galak@kernel.crashing.org>
14914 Date: Mon Oct 27 13:16:20 2008 -0500
14916 pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
14918 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14920 commit 6b59e03e0237a40a2305ea385defdfd92000978b
14921 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14922 Date: Mon Sep 1 16:21:22 2008 +0200
14924 lcd: Let the board code show board-specific info
14926 The information displayed when CONFIG_LCD_INFO is set is inherently
14927 board-specific, so it should be done by the board code. The current code
14928 dealing with this only handles two cases, and is already a horrible mess
14931 Yes, this duplicates some code, but it also allows boards to print more
14932 board-specific information; this used to be very difficult.
14934 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14935 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14937 commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
14938 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14939 Date: Mon Sep 1 16:21:21 2008 +0200
14941 lcd: Set lcd_is_enabled before clearing the screen
14943 This allows the logo/info rendering routines to use the regular
14944 lcd_putc/lcd_puts/lcd_printf calls.
14946 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14947 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14949 commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
14950 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14951 Date: Mon Sep 1 16:21:20 2008 +0200
14953 lcd: Implement lcd_printf()
14955 lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
14956 this by borrowing the lcd_printf() implementation from the cogent board
14957 code (which appears to use its own LCD framework.)
14959 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14960 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14962 commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
14963 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14964 Date: Mon Sep 1 16:21:19 2008 +0200
14966 atmel_lcdfb: Straighten out funky vl_sync logic
14968 If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
14969 otherwise we don't. WTF?
14971 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14972 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14974 commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
14975 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14976 Date: Mon Sep 1 16:21:18 2008 +0200
14978 atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
14980 atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
14981 includes a file that does, asm/arch/gpio.h, but this file doesn't
14982 include <asm/arch/hardware.h> like it's supposed to.
14984 Add the missing include to asm/arch/gpio.h and remove the workaround
14985 from the atmel_lcdfb driver. This makes the driver compile on avr32.
14987 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14988 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14990 commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
14991 Author: Kumar Gala <galak@kernel.crashing.org>
14992 Date: Wed Oct 22 14:38:55 2008 -0500
14994 86xx: Convert all fsl_pci_init users to new APIs
14996 Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
14997 fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
14999 With these changes the board code is a bit smaller and we get dma-ranges
15000 set in the device tree for these boards.
15002 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15003 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15004 Acked-by: Jon Loeliger <jdl@freescale.com>
15006 commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
15007 Author: Kumar Gala <galak@kernel.crashing.org>
15008 Date: Tue Oct 21 08:28:33 2008 -0500
15010 85xx: Convert all fsl_pci_init users to new APIs
15012 Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
15013 MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
15014 and ft_fsl_pci_setup().
15016 With these changes the board code is a bit smaller and we get dma-ranges
15017 set in the device tree for these boards.
15019 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15020 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15022 commit a2aab460727e5f674353a83a81000ef794bffcae
15023 Author: Kumar Gala <galak@kernel.crashing.org>
15024 Date: Thu Oct 23 00:01:06 2008 -0500
15026 pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
15028 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15029 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15031 commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
15032 Author: Kumar Gala <galak@kernel.crashing.org>
15033 Date: Wed Oct 22 14:06:24 2008 -0500
15035 pci/fsl_pci_init: Add a common PCI inbound setup function
15037 Add a common setup function that determines the pci_region(s) based
15038 on how much memory we have in the system.
15040 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15041 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15043 commit 612ea01018a459234d54ed57ec6a5a244ce75678
15044 Author: Kumar Gala <galak@kernel.crashing.org>
15045 Date: Tue Oct 21 10:13:14 2008 -0500
15047 pci/fsl_pci_init: Enable larger address and setting inbound windows properly
15049 * PCI Inbound window was setup incorrectly. The PCI address and system
15050 address were swapped. The PCI address should be setting piwar/piwbear
15051 and the system address should be setting pitar.
15053 * Removed masking of addresses to allow for system address to support
15054 system address & PCI address >32-bits
15056 * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
15058 * Respect the PCI_REGION_PREFETCH for inbound windows
15060 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15061 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15063 commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
15064 Author: Kumar Gala <galak@kernel.crashing.org>
15065 Date: Wed Oct 22 23:33:56 2008 -0500
15067 fdt: Added helper to set PCI dma-ranges property
15069 Added fdt_pci_dma_ranges() that parses the pci_region info from the
15070 struct pci_controller and populates the dma-ranges based on it.
15072 The max # of windws/dma-ranges we support is 3 since on embedded
15073 PowerPC based systems this is the max number of windows.
15075 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15076 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15078 commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
15079 Author: Kumar Gala <galak@kernel.crashing.org>
15080 Date: Thu Oct 23 00:05:47 2008 -0500
15082 fdt: Add fdt_getprop_u32_default helpers
15084 Add helper functions to return find a node and return it's property
15085 or a default value.
15087 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15088 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15089 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
15091 commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
15092 Author: Kumar Gala <galak@kernel.crashing.org>
15093 Date: Tue Oct 21 18:06:15 2008 -0500
15095 86xx: Enable 64-bit PCI resources on all Freescale boards
15097 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15098 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15100 commit 0151cbaccf4504821ecfde0217299bd740086bb6
15101 Author: Kumar Gala <galak@kernel.crashing.org>
15102 Date: Tue Oct 21 11:33:58 2008 -0500
15104 85xx: Enable 64-bit PCI resources on all Freescale boards
15106 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15107 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15109 commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
15110 Author: Kumar Gala <galak@kernel.crashing.org>
15111 Date: Tue Oct 21 08:36:08 2008 -0500
15113 pci: Allow for PCI addresses to be 64-bit
15115 PCI bus is inherently 64-bit. While not all system require access to
15116 the full 64-bit PCI address range some do. This allows those systems
15117 to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
15119 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15120 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
15121 Acked-by: Wolfgang Denk <wd@denx.de>
15123 commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
15124 Author: Dave Liu <daveliu@freescale.com>
15125 Date: Thu Oct 23 21:18:53 2008 +0800
15127 85xx: Fix the incorrect register used for DDR erratum1
15129 The 8572 DDR erratum1:
15130 DDR controller may enter an illegal state when operating
15131 in 32-bit bus mode with 4-beat bursts.
15134 When operating with a 32-bit bus, it is recommended that
15135 DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
15136 This forces the DDR controller to use 4-beat bursts when
15137 communicating to the DRAMs. However, an issue exists that
15138 could lead to data corruption when the DDR controller is
15139 in 32-bit bus mode while using 4-beat bursts.
15142 If the DDR controller is operating in 32-bit bus mode with
15143 4-beat bursts, then the controller may enter into a bad state.
15144 All subsequent reads from memory is corrupted.
15145 Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
15146 Therefore, this erratum does not affect DDR3 mode.
15149 To work around this issue, software must set DEBUG_1[31] in
15150 DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
15151 and CCSRBAR offset + 0x6f00 for DDR_2).
15153 Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
15154 as condition, but it should be DDR_SDRAM_CFG register.
15156 Signed-off-by: Dave Liu <daveliu@freescale.com>
15158 commit d5b693090ed08d24c18491df9d8fc7387b2906f3
15159 Author: Dave Liu <daveliu@freescale.com>
15160 Date: Thu Oct 23 21:17:19 2008 +0800
15162 85xx: remove unused config definition
15164 Signed-off-by: Dave Liu <daveliu@freescale.com>
15166 commit 0f060c3bf82832331a509f2e5d2442539e7aad09
15167 Author: Kumar Gala <galak@kernel.crashing.org>
15168 Date: Thu Oct 23 01:47:38 2008 -0500
15170 85xx: Add basic e500mc core support
15172 Introduce CONFIG_E500MC to deal with the minor differences between
15175 * Certain fields of HID0/1 don't exist anymore on e500mc
15176 * Cache line size is 64-bytes on e500mc
15177 * reset value of PIR is different
15179 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15181 commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
15182 Author: Kumar Gala <galak@kernel.crashing.org>
15183 Date: Thu Oct 23 01:47:37 2008 -0500
15185 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
15187 Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
15188 e500mc's 64-byte cacheline properly when it gets added.
15190 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15192 commit 5deb8022c3749faac30e9ad9694691e2442b5c93
15193 Author: Georg Schardt <schardt@team-ctech.de>
15194 Date: Fri Oct 24 13:51:52 2008 +0200
15196 ppc4xx: New board avnet fx12 minimodul
15198 This patch adds support for the avnet fx12 minimodul.
15199 It needs the "ppc4xx: Generic architecture for xilinx ppc405"
15200 patch from Ricardo.
15202 Signed-off-by: Georg Schardt <schardt@team-ctech.de>
15203 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
15204 Signed-off-by: Stefan Roese <sr@denx.de>
15206 commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
15207 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
15208 Date: Tue Oct 21 18:29:46 2008 +0200
15210 ppc4xx: Generic architecture for xilinx ppc405(v3)
15212 As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
15213 ppc440 boards, this patch presents a common architecture for all the
15214 xilinx ppc405 boards.
15216 Any custom xilinx ppc405 board can be added very easily with no code
15219 This patch also adds a simple generic board, that can be used on almost
15220 any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
15222 This patch is prepared to work with the latest version of EDK (10.1)
15224 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
15225 Signed-off-by: Stefan Roese <sr@denx.de>
15227 commit 485c00a57fab86f72a3769480c66bf1ca22e1459
15228 Author: Stefan Roese <sr@denx.de>
15229 Date: Fri Oct 24 08:56:09 2008 +0200
15231 ppc4xx: Disable DDR2 autocalibration on Kilauea for now
15233 Since the new autocalibration still has some problems on some Kilauea
15234 boards with 200MHz DDR2 frequency we disable the autocalibration and
15235 use the hardcoded values as done before. This seems to work reliably
15236 on all known DDR2 frequencies.
15238 After the autocalibration issue is fixed we will enable it again.
15240 Signed-off-by: Stefan Roese <sr@denx.de>
15242 commit f177f4250c729727b1629fa8d8d6556c999e9b8c
15243 Author: Mike Frysinger <vapier@gentoo.org>
15244 Date: Wed Apr 9 02:02:07 2008 -0400
15246 Blackfin: fix up UART status bit handling
15248 Some Blackfin UARTs are read-to-clear while others are write-to-clear.
15249 This can cause problems when we poll the LSR and then later try and handle
15250 any errors detected.
15252 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15254 commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
15255 Author: Mike Frysinger <vapier@gentoo.org>
15256 Date: Sat Oct 11 20:42:17 2008 -0400
15258 Blackfin: bf561-ezkit: drop redundant code
15260 Common Blackfin code already announces CPU information.
15262 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15264 commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
15265 Author: Mike Frysinger <vapier@gentoo.org>
15266 Date: Sat Oct 11 20:43:10 2008 -0400
15268 Blackfin: bf561-ezkit: drop pointless USB code
15270 The USB/LAN register settings are not actually used/needed in order to
15271 drive things from U-Boot, so drop the code.
15273 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15275 commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
15276 Author: Mike Frysinger <vapier@gentoo.org>
15277 Date: Sat Oct 11 20:47:58 2008 -0400
15279 Blackfin: linker scripts: force start.o and set initcode boundaries
15281 Make sure that the start.o object is always the first object in our linker
15282 script regardless of configuration settings, and add some linker symbols
15283 so the ldr utility can properly locate the initcode when generating a LDR.
15285 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15287 commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
15288 Author: Mike Frysinger <vapier@gentoo.org>
15289 Date: Sat Oct 11 21:19:39 2008 -0400
15291 Blackfin: small cpu init optimization while setting interrupt mask
15293 Use the sti instruction to set the initial interrupt mask rather than
15294 banging on the core IMASK MMR to save both space and time.
15296 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15298 commit 960922291c9594acb575cec7e47d7bed9b58182c
15299 Author: Mike Frysinger <vapier@gentoo.org>
15300 Date: Sat Oct 11 21:18:10 2008 -0400
15302 Blackfin: set initial stack correctly according to Blackfin ABI
15304 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15306 commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
15307 Author: Mike Frysinger <vapier@gentoo.org>
15308 Date: Sun Apr 20 03:11:53 2008 -0400
15310 Blackfin: make baud calculation more accurate
15312 We should use the algorithm in the Linux kernel so that the UART divisor
15313 calculation is more accurate. It also fixes problems on some picky UARTs
15314 that have sampling anomalies.
15316 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15318 commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
15319 Author: Mike Frysinger <vapier@gentoo.org>
15320 Date: Mon Oct 6 04:21:41 2008 -0400
15322 Blackfin: decode hwerrcause/excause when crashing
15324 Having to decode hwerrcause/excause values is a pain, so automate it.
15326 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15328 commit 2de95bb20c488f20298df6881b700a5a757ee780
15329 Author: Mike Frysinger <vapier@gentoo.org>
15330 Date: Mon Oct 6 04:20:54 2008 -0400
15332 Blackfin: fix register dump messages
15334 Make sure we report RETI/IPEND correctly.
15336 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15338 commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
15339 Author: Mike Frysinger <vapier@gentoo.org>
15340 Date: Mon Oct 6 04:19:34 2008 -0400
15342 Blackfin: don't bother displaying reboot msg when crashing
15344 The hang function already tells you to reboot, so no point in showing it
15347 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15349 commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
15350 Author: Mike Frysinger <vapier@gentoo.org>
15351 Date: Sun Jun 1 01:23:48 2008 -0400
15353 Blackfin: enable support for nested interrupts
15355 During cpu init, make sure we initialize the CEC properly so that
15356 interrupts can fire and be handled while U-Boot is running.
15358 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15360 commit 39782727e185860faa4884c2b04e84cb33d1c6cf
15361 Author: Mike Frysinger <vapier@gentoo.org>
15362 Date: Mon Oct 6 03:55:25 2008 -0400
15364 Blackfin: init NAND before relocating env
15366 If booting out of NAND, we need to make sure we initialize it properly
15367 before attempting to relocate the environment.
15369 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15371 commit 0f9a8819416ba40a53de50af148847a0e508f84d
15372 Author: Mike Frysinger <vapier@gentoo.org>
15373 Date: Thu Aug 7 18:40:13 2008 -0400
15375 Blackfin: check cache bits, not cplb bits
15377 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15379 commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
15380 Author: Mike Frysinger <vapier@gentoo.org>
15381 Date: Thu Aug 7 17:52:59 2008 -0400
15383 Blackfin: drop unused cache flush code
15385 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15387 commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
15388 Author: Mike Frysinger <vapier@gentoo.org>
15389 Date: Thu Aug 7 15:21:47 2008 -0400
15391 Blackfin: unify cache handling code
15393 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15395 commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
15396 Author: Mike Frysinger <vapier@gentoo.org>
15397 Date: Mon Oct 6 03:39:07 2008 -0400
15399 Blackfin: only initialize the RTC when actually used
15401 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15403 commit 621e579b812dd1a2e6777f7cbf6e55e736505823
15404 Author: Mike Frysinger <vapier@gentoo.org>
15405 Date: Mon Oct 6 03:44:33 2008 -0400
15407 Blackfin: fix SWRST register definition
15409 The SWRST register is a 16bit, not 32bit, register.
15411 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15413 commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
15414 Author: Mike Frysinger <vapier@gentoo.org>
15415 Date: Thu Aug 7 18:54:57 2008 -0400
15417 Blackfin: build with -fomit-frame-pointer
15419 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15421 commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
15422 Author: Mike Frysinger <vapier@gentoo.org>
15423 Date: Thu Aug 7 17:50:26 2008 -0400
15425 Blackfin: document some of the blackfin directories
15427 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15429 commit e4337968e43698a68ba608369f46d4a4114111ca
15430 Author: Mike Frysinger <vapier@gentoo.org>
15431 Date: Thu Aug 7 15:16:56 2008 -0400
15433 Blackfin: only enable hardware error irq by default
15435 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15437 commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
15438 Author: Mike Frysinger <vapier@gentoo.org>
15439 Date: Thu Aug 7 13:36:43 2008 -0400
15441 Blackfin: punt old unused mem_init.h header
15443 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15445 commit bcc121a01608042066a19ab5bff5bcfb805bf406
15446 Author: Mike Frysinger <vapier@gentoo.org>
15447 Date: Thu Aug 7 13:18:55 2008 -0400
15449 Blackfin: delete unused page_descriptor_table_size define
15451 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15453 commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
15454 Author: Mike Frysinger <vapier@gentoo.org>
15455 Date: Thu Aug 7 13:17:03 2008 -0400
15457 Blackfin: fix typo in boot mode comment and add NAND define
15459 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15461 commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
15462 Author: Ben Maan <moo@cow>
15463 Date: Thu Aug 7 13:14:21 2008 -0400
15465 Blackfin: fix port mux defines for BF54x
15467 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15469 commit 0656ef2ba274910d31364fe022f6c7db0051660d
15470 Author: Mike Frysinger <vapier@gentoo.org>
15471 Date: Thu Aug 7 13:09:50 2008 -0400
15473 Blackfin: update anomaly lists
15475 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15477 commit 50ca95402876cf7bac4e2d4f7855f616a038763f
15478 Author: Mike Frysinger <vapier@gentoo.org>
15479 Date: Thu Aug 7 13:08:54 2008 -0400
15481 Blackfin: unify DSPID/DBGSTAT MMR definitions
15483 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15485 commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
15486 Author: Wolfgang Denk <wd@denx.de>
15487 Date: Tue Oct 21 15:53:51 2008 +0200
15489 Fix strmhz(): avoid printing negative fractions
15491 Signed-off-by: Wolfgang Denk <wd@denx.de>
15493 commit 4a7f6b750d8de543fdf8e58acd86745010054571
15494 Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
15495 Date: Fri Oct 17 08:55:51 2008 -0400
15497 mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
15499 This is done to allow other 83XX based platforms which also have UPM
15500 (e.g. 8360) to configure and use their UPM in u-boot.
15502 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
15503 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15505 commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
15506 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15507 Date: Tue Oct 14 22:58:53 2008 +0400
15509 mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
15511 With this patch u-boot can fixup the dr_mode and phy_type properties
15512 for the Dual-Role USB controller.
15514 While at it, also remove #ifdefs around includes, they are not needed.
15516 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15517 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15519 commit b3379f3fd13969934c00097c05754e7a8990fd39
15520 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15521 Date: Wed Oct 8 20:52:54 2008 +0400
15523 mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
15525 Though NAND chip is replaceable on the MPC837XE-MDS boards, the
15526 current settings don't work with the default chip on the board.
15527 Nevertheless Freescale's U-Boot sets the option register correctly,
15528 so I just dumped the register from the working u-boot. My guess is
15529 that the old settings were applicable for some pilot boards, not
15530 found in the production.
15532 This patch also enables FSL ELBC driver so that we could access
15533 the NAND storage in the u-boot.
15535 The NAND support costs about 45KB, so the u-boot no longer fits
15536 into two 128KB NOR flash sectors, thus we also have to adjust
15537 environment location: add another 128KB to the monitor length.
15539 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15541 It is due to hardware design and logic defect, that is the
15542 I/O[0:7] of NAND chip is connected to LAD[7:0], so when
15543 the NAND chip connected to nLCS3, you have to set up the
15544 OR3[BCTLD] = '1' for normal operation, otherwise it will have
15545 bus contention due to the pin 48/25 of U60 is enabled.
15547 Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
15548 asserted upon access to the NAND chip, keep the default state.
15550 Acked-by: Dave Liu <daveliu@freescale.com>
15551 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15553 commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
15554 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15555 Date: Thu Oct 2 19:17:33 2008 +0400
15557 mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
15559 The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
15560 standalone or acting as a PCI agent. User's Guide says:
15562 - When the CPLD recognizes its location on the PIB it automatically
15563 configures RCW to the PCI Host.
15564 - If the CPLD fails to recognize its location then it is automatically
15565 configured as an Agent and the PCI is configured to an external arbiter.
15567 This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
15568 flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
15569 PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
15570 any arbiter bad things will happen (here the board hangs during any config
15573 In this situation we must disable the PCI. And in case of anybody really
15574 want to use an external arbiter, we provide "pci_external_aribter"
15575 environment variable.
15577 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15578 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15580 commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
15581 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15582 Date: Thu Oct 2 18:32:25 2008 +0400
15584 mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
15586 This involves configuring the SerDes and fixing up the flags and
15587 PHY addresses for the TSECs.
15589 For Linux we also fix up the device tree.
15591 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15592 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15594 commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
15595 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15596 Date: Thu Oct 2 18:31:59 2008 +0400
15598 mpc83xx: add TSECs' HRCWH masks for MPC837x processors
15600 We'll use these masks to parse TSEC modes out of HRCWH.
15602 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15603 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15605 commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
15606 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15607 Date: Thu Oct 2 18:31:56 2008 +0400
15609 mpc83xx: serdes: add forgotten shifts for rfcks
15611 The rfcks should be shifted by 28 bits left. We didn't notice the bug
15612 because we were using only 100MHz clocks (for which rfcks == 0).
15614 Though, for SGMII we'll need 125MHz clocks.
15616 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15617 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15619 commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
15620 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15621 Date: Thu Oct 2 18:31:53 2008 +0400
15623 mpc83xx: fix serdes setup for the MPC8378E boards
15625 MPC837xE specs says that SerDes1 has:
15627 — Two lanes running x1 SGMII at 1.25 Gbps;
15628 — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
15632 — Two lanes running x1 PCI Express at 2.5 Gbps;
15633 — One lane running x2 PCI Express at 2.5 Gbps;
15634 — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
15636 The spec also explicitly states that PEX options are not valid for
15639 Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
15640 which is wrong to do.
15642 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15643 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15645 commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
15646 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15647 Date: Wed Sep 10 18:12:37 2008 +0400
15649 mpc83xx: mpc8360emds: rework LBC SDRAM setup
15651 Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
15652 it difficult to use (b/c then the memory is discontinuous and
15653 there is quite big memory hole between the DDR/SDRAM regions).
15655 This patch reworks LBC SDRAM setup so that now we dynamically
15656 place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
15659 With this patch we're able to:
15661 - Boot without external DDR memory;
15662 - Use most "DDR + SDRAM" setups without need to support for
15663 sparse/discontinuous memory model in the software.
15665 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15666 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15668 commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
15669 Author: Wolfgang Denk <wd@xpert.denx.de>
15670 Date: Tue Oct 21 11:23:56 2008 +0200
15672 FDT: don't use private kernel header files
15674 On some systems (for example Fedora Core 4) U-Boot builds with the
15675 following wanrings only:
15678 In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
15680 /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
15682 This patch fixes this problem.
15684 Signed-off-by: Wolfgang Denk <wd@denx.de>
15686 commit f4d14c55504ce40287321bd63ee269e3233ee4ae
15687 Author: Stefan Roese <sr@denx.de>
15688 Date: Mon Oct 13 15:15:31 2008 +0200
15690 ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
15692 Signed-off-by: Stefan Roese <sr@denx.de>
15694 commit 43cbce69d48d052574d71f50724be546d90a46a4
15695 Author: Stefan Roese <sr@denx.de>
15696 Date: Mon Oct 13 10:45:14 2008 +0200
15698 ppc4xx: Correctly setup ranges property in ebc node
15700 Previously only the NOR flash mapping was written into the ranges
15701 property of the ebc node. This patch now writes all enabled chip
15702 select areas into the ranges property.
15704 Signed-off-by: Stefan Roese <sr@denx.de>
15706 commit d7b26d58328f137471ea97de382bfa63f7239931
15707 Author: Dirk Eibach <eibach@gdsys.de>
15708 Date: Wed Oct 8 15:37:50 2008 +0200
15710 ppc4xx: Add GDSys neo 405EP board support
15712 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
15713 Signed-off-by: Stefan Roese <sr@denx.de>
15715 commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
15716 Author: Niklaus Giger <niklaus.giger@netstal.com>
15717 Date: Wed Oct 1 14:46:13 2008 +0200
15719 ppc4xx: Update configs for Netstal boards
15721 I reorganized my config files, putting the common stuff into netstal-common.h
15722 (got the idea by looking a amcc-common.h from Stefan).
15724 Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
15726 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
15727 Signed-off-by: Stefan Roese <sr@denx.de>
15729 commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
15730 Author: Adam Graham <agraham@amcc.com>
15731 Date: Wed Oct 8 10:13:19 2008 -0700
15733 ppc4xx: Add routine to retrieve CPU number
15735 Provide a weak defined routine to retrieve the CPU number for
15736 reference boards that have multiple CPU's. Default behavior
15737 is the existing single CPU print output. Reference boards with
15738 multiple CPU's need to provide a board specific routine.
15739 See board/amcc/arches/arches.c for an example.
15741 Signed-off-by: Adam Graham <agraham@amcc.com>
15742 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
15743 Signed-off-by: Stefan Roese <sr@denx.de>
15745 commit 59217bae40e90982ab5400d849c08af683ace036
15746 Author: Adam Graham <agraham@amcc.com>
15747 Date: Wed Oct 8 10:13:14 2008 -0700
15749 ppc4xx: Add static support for 44x IBM SDRAM Controller
15751 This patch add the capability to configure a PPC440 based IBM SDRAM
15752 Controller with static, compiled-in, values. PPC440 memory subsystem
15753 includes a Memory Queue core.
15755 Signed-off-by: Adam Graham <agraham@amcc.com>
15756 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
15757 Signed-off-by: Stefan Roese <sr@denx.de>
15759 commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
15760 Author: Adam Graham <agraham@amcc.com>
15761 Date: Wed Oct 8 10:12:53 2008 -0700
15763 ppc4xx: Add AMCC Arches board support (dual 460GT)
15765 The Arches Evaluation board is based on the AMCC 460GT SoC chip.
15766 This board is a dual processor board with each processor providing
15767 independent resources for Rapid IO, Gigabit Ethernet, and serial
15768 communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
15769 FLASH, UART, EEPROM and temperature sensor, along with a shared debug
15770 port. The two 460GT's will communicate with each other via shared
15771 memory, Gigabit Ethernet and x1 PCI-Express.
15773 Signed-off-by: Adam Graham <agraham@amcc.com>
15774 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
15775 Signed-off-by: Stefan Roese <sr@denx.de>
15777 commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
15778 Author: Wolfgang Denk <wd@xpert.denx.de>
15779 Date: Sun Oct 19 21:54:30 2008 +0200
15781 TQM8260: environment in flash instead EEPROM, baudrate 115k
15783 Several customers have reported problems with the environment in
15784 EEPROM, including corrupted content after board reset. Probably the
15785 code to prevent I2C Enge Conditions is not working sufficiently.
15787 We move the environment to flash now, which allows to have a backup
15788 copy plus gives much faster boot times.
15790 Also, change the default console initialization to 115200 bps as used
15791 on most other boards.
15793 Signed-off-by: Wolfgang Denk <wd@denx.de>
15795 commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
15796 Author: Kumar Gala <galak@kernel.crashing.org>
15797 Date: Sun Oct 19 12:49:19 2008 -0500
15799 85xx: Fix compile warning in mpc8536ds.c
15801 mpc8536ds.c: In function 'is_sata_supported':
15802 mpc8536ds.c:615: warning: unused variable 'devdisr'
15804 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15806 commit 8ed44d91c8122d00368523b0b746691c895d3b3c
15807 Author: Wolfgang Denk <wd@denx.de>
15808 Date: Sun Oct 19 02:35:50 2008 +0200
15810 Cleanup: fix "MHz" spelling
15812 Signed-off-by: Wolfgang Denk <wd@denx.de>
15814 commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
15815 Author: Wolfgang Denk <wd@denx.de>
15816 Date: Sun Oct 19 02:35:49 2008 +0200
15818 Use strmhz() to format clock frequencies
15820 Signed-off-by: Wolfgang Denk <wd@denx.de>
15822 commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
15823 Author: Wolfgang Denk <wd@denx.de>
15824 Date: Sun Oct 19 02:35:48 2008 +0200
15826 strmhz(): Round numbers when printing clock frequencies
15828 Round clock frequencies for printing.
15830 Many boards printed off clock frequencies like 399 MHz instead of the
15831 exact 400 MHz because numberes were not rounded. This is fixed now.
15833 Signed-off-by: Wolfgang Denk <wd@denx.de>
15835 commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
15836 Author: Timur Tabi <timur@freescale.com>
15837 Date: Mon Oct 20 15:16:47 2008 -0500
15839 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
15841 Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
15842 to add a comment that the correct value disagrees with the 8544 reference
15843 manual. The changelog for that commit is also wrong, as it says "bit 28"
15844 when it should be "bit 24".
15846 Signed-off-by: Timur Tabi <timur@freescale.com>
15848 commit 360fe71e82b83e264c964c9447c537e9a1f643c8
15849 Author: Heiko Schocher <hs@denx.de>
15850 Date: Fri Oct 17 18:24:06 2008 +0200
15852 mgcoge: add redundant environment sector
15854 Signed-off-by: Heiko Schocher <hs@denx.de>
15856 commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
15857 Author: Heiko Schocher <hs@denx.de>
15858 Date: Fri Oct 17 18:23:27 2008 +0200
15860 mgsuvd: update size of environment
15862 Signed-off-by: Heiko Schocher <hs@denx.de>
15864 commit 2e26d837f11460c0e6dede7d65424a31e0183d09
15865 Author: Jason Jin <Jason.jin@freescale.com>
15866 Date: Fri Oct 10 11:41:00 2008 +0800
15868 Enabled the Freescale SGMII riser card on 8536DS
15870 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15872 commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
15873 Author: Liu Yu <yu.liu@freescale.com>
15874 Date: Fri Oct 10 11:40:59 2008 +0800
15876 Enabled the Freescale SGMII riser card on 8572DS
15878 This patch based on Andy's work.
15879 Including command 'pixis_set_sgmii' support.
15881 Signed-off-by: Liu Yu <yu.liu@freescale.com>
15883 commit bff188baf9427c35745356439435acf3864d4c65
15884 Author: Liu Yu <yu.liu@freescale.com>
15885 Date: Fri Oct 10 11:40:58 2008 +0800
15887 Make pixis_set_sgmii more general to support MPC85xx boards.
15889 The pixis sgmii command depend on the FPGA support on the board, some 85xx
15890 boards support SGMII riser card but did not support this command, define
15891 CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
15893 Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
15894 are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
15895 PIXIS_VCFGEN1_MASK in header file for both boards.
15897 Signed-off-by: Liu Yu <yu.liu@freescale.com>
15899 commit 5e981d683d2363204c76773941c2e9c2044c808f
15900 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15901 Date: Wed Oct 8 23:38:02 2008 -0500
15903 Add cpu/8xxx to TAGS_SUBDIRS
15905 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15907 commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
15908 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15909 Date: Thu Oct 9 01:25:55 2008 -0500
15911 fsl_law clear enable before changing.
15913 Debug sessions may have left enabled laws.
15914 Changing lawbar with an unkown enabled tgtid could cause problems.
15916 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15918 commit 86be510f7b5443e7e937f696bfbe037fdc740b15
15919 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15920 Date: Thu Oct 9 00:29:27 2008 -0500
15922 mpc8572 additional end-point mode
15924 mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
15925 Include host_agent == 0 decode for end-point determination.
15927 This is not needed for the ds reference board since pcie3 will be a host
15928 in order to connect to the uli chip. Include it here as a reference for
15929 other mpc8572 boards.
15931 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15933 commit 6856b3d0221a838580e6bb06f61425fd7529ba93
15934 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15935 Date: Wed Oct 8 23:37:59 2008 -0500
15937 85xx if NUM_CPUS>1, print cpu number
15939 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15941 commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
15942 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15943 Date: Wed Oct 8 23:38:01 2008 -0500
15945 pixis do not print long help if not configured
15947 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15949 commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
15950 Author: Andy Fleming <afleming@freescale.com>
15951 Date: Tue Oct 7 08:09:50 2008 -0500
15953 Have u-boot pass stashing parameters into device tree
15955 Some cores don't support ethernet stashing at all, and some
15956 instances have errata. Adds 3 properties to gianfar nodes
15957 which support stashing. For now, just add this support to
15960 Signed-off-by: Andy Fleming <afleming@freescale.com>
15962 commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
15963 Author: Haiying Wang <Haiying.Wang@freescale.com>
15964 Date: Fri Oct 3 12:37:57 2008 -0400
15966 Add DDR options setting on MPC8641HPCN board
15968 * Add board specific parameter table to choose correct cpo, clk_adjust,
15969 write_data_delay based on board ddr frequency and n_ranks.
15971 * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
15973 Signed-off-by: James Yang <James.Yang@freescale.com>
15974 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15976 commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
15977 Author: Haiying Wang <Haiying.Wang@freescale.com>
15978 Date: Fri Oct 3 12:37:41 2008 -0400
15980 Add ddr interleaving suppport for MPC8572DS board
15982 * Add board specific parameter table to choose correct cpo, clk_adjust,
15983 write_data_delay, 2T based on board ddr frequency and n_ranks.
15985 * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
15987 * Set memory controller interleaving mode to bank interleaving, and disable
15988 bank(chip select) interleaving mode by default, because the default on-board
15989 DDR DIMMs are 2x512MB single-rank.
15991 * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
15993 Signed-off-by: James Yang <James.Yang@freescale.com>
15994 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15996 commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
15997 Author: Haiying Wang <Haiying.Wang@freescale.com>
15998 Date: Fri Oct 3 12:37:26 2008 -0400
16000 Add debug information for DDR controller registers
16002 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16004 commit c9ffd839b1ada502c86f88edaf1534426b6688ce
16005 Author: Haiying Wang <Haiying.Wang@freescale.com>
16006 Date: Fri Oct 3 12:37:10 2008 -0400
16008 Check DDR interleaving mode
16010 * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
16012 * Print DDR interleaving mode information
16013 * Add doc/README.fsl-ddr to describe the interleaving setting
16015 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16017 commit dfb49108e4f86c2224e1f30124328b0de66ef72e
16018 Author: Haiying Wang <Haiying.Wang@freescale.com>
16019 Date: Fri Oct 3 12:36:55 2008 -0400
16021 Pass dimm parameters to populate populate controller options
16023 Because some dimm parameters like n_ranks needs to be used with the board
16024 frequency to choose the board parameters like clk_adjust etc. in the
16025 board_specific_paramesters table of the board ddr file, we need to pass
16026 the dimm parameters to the board file.
16028 * move ddr dimm parameters header file from /cpu to /include directory.
16029 * add ddr dimm parameters to populate board specific options.
16030 * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
16032 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16034 commit dbbbb3abeff325855cae76e33d69d5665631443f
16035 Author: Haiying Wang <Haiying.Wang@freescale.com>
16036 Date: Fri Oct 3 12:36:39 2008 -0400
16038 Make DDR interleaving mode work correctly
16041 1. Correctly set intlv_ctl in cs_config.
16042 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
16043 3. Set base_address and total memory for each ddr controller in memory
16044 controller interleaving mode.
16046 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16048 commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
16049 Author: Kumar Gala <galak@kernel.crashing.org>
16050 Date: Mon Sep 22 23:40:42 2008 -0500
16052 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
16054 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16056 commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
16057 Author: Kumar Gala <galak@kernel.crashing.org>
16058 Date: Mon Sep 22 14:11:11 2008 -0500
16060 85xx: Improve flash remapping on MPC8572DS & MPC8536DS
16062 Changing the flash from cacheable to cache-inhibited was taking a significant
16063 amount of time due to the fact that we were iterating over the full 256M of
16064 flash. Instead we can just flush the L1 d-cache and invalidate the i-cache.
16066 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16068 commit 54e091d3b603a3332c619199ca83a07e95960da4
16069 Author: Kumar Gala <galak@kernel.crashing.org>
16070 Date: Mon Sep 22 14:11:10 2008 -0500
16072 85xx: Export invalidate_{i,d}cache and add flush_dcache
16074 Added the ability for C code to invalidate the i/d-cache's and
16075 to flush the d-cache. This allows us to more efficient change mappings
16076 from cache-able to cache-inhibited.
16078 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16080 commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
16081 Author: Heiko Schocher <hs@denx.de>
16082 Date: Fri Oct 17 16:11:52 2008 +0200
16084 mgcoge, mgsuvd: extract more common code
16086 in ft_blob_update () for both boards was an unneccessary
16087 repetition of code, which this patch moves in a common
16088 function for this boards.
16090 Signed-off-by: Heiko Schocher <hs@denx.de>
16092 commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
16093 Author: Heiko Schocher <hs@denx.de>
16094 Date: Fri Oct 17 12:15:55 2008 +0200
16096 mgcoge, mgsuvd: use in_*/out_* accesors
16098 Signed-off-by: Heiko Schocher <hs@denx.de>
16100 commit a21ca95f8b9dca22714952b348e4905ac157b5cd
16101 Author: Heiko Schocher <hs@denx.de>
16102 Date: Fri Oct 17 13:52:51 2008 +0200
16104 mgsuvd: fix compiler warning when using soft_i2c driver
16106 Signed-off-by: Heiko Schocher <hs@denx.de>
16108 commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
16109 Author: Heiko Schocher <hs@denx.de>
16110 Date: Fri Oct 17 12:15:05 2008 +0200
16112 mgsuvd: fix coding style
16114 Signed-off-by: Heiko Schocher <hs@denx.de>
16116 commit 5f4c3137f4f051787707c548133823f1656eb508
16117 Author: Heiko Schocher <hs@denx.de>
16118 Date: Fri Oct 17 12:13:30 2008 +0200
16120 mgcoge: Second Flash on CS5 not on CS1
16122 Signed-off-by: Heiko Schocher <hs@denx.de>
16124 commit 76da19df5b8e186d269f29190696bd31fb6c836b
16125 Author: Kumar Gala <galak@kernel.crashing.org>
16126 Date: Thu Oct 16 21:52:08 2008 -0500
16128 Added arch_lmb_reserve to allow arch specific memory regions protection
16130 Each architecture has different ways of determine what regions of memory
16131 might not be valid to get overwritten when we boot. This provides a
16132 hook to allow them to reserve any regions they care about. Currently
16133 only ppc, m68k and sparc need/use this.
16135 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16137 commit e02d4a9904c8f36395994c0c81469d552b82f5ea
16138 Author: Heiko Schocher <hs@denx.de>
16139 Date: Thu Oct 16 16:32:35 2008 +0200
16141 mgcoge: added CONFIG_FIT to support the new u-boot image format
16143 Signed-off-by: Heiko Schocher <hs@denx.de>
16145 commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
16146 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16147 Date: Thu Oct 16 15:01:15 2008 +0200
16149 rename CFG_ macros to CONFIG_SYS
16151 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16153 commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
16154 Author: Kumar Gala <galak@kernel.crashing.org>
16155 Date: Mon Oct 13 14:12:55 2008 -0500
16157 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
16159 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16161 commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
16162 Author: Kumar Gala <galak@kernel.crashing.org>
16163 Date: Tue Sep 23 10:05:02 2008 -0500
16165 Expose command table search for sub-commands
16167 Sub-command can benefit from using the same table and search functions
16168 that top level commands have. Expose this functionality by refactoring
16169 find_cmd() and introducing find_cmd_tbl() that sub-command processing
16172 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16174 commit f7e51b27508446f8cae3927975817137979ad5e8
16175 Author: Heiko Schocher <hs@denx.de>
16176 Date: Wed Oct 15 09:41:33 2008 +0200
16178 mgsuvd, mgcoge: added BOOTCOUNT feature.
16180 Signed-off-by: Heiko Schocher <hs@denx.de>
16182 commit 8f64da7f83b553889bc08400c97047998382e9d2
16183 Author: Heiko Schocher <hs@denx.de>
16184 Date: Wed Oct 15 09:41:00 2008 +0200
16186 mgcoge, mgsuvd: added support for the IVM EEprom.
16188 The EEprom contains some Manufacturerinformation,
16189 which are read from u-boot at boot time, and saved
16190 in same hush shell variables.
16192 Signed-off-by: Heiko Schocher <hs@denx.de>
16194 commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
16195 Author: Heiko Schocher <hs@denx.de>
16196 Date: Wed Oct 15 09:40:28 2008 +0200
16198 hush: add showvar command for hush shell.
16200 This new command shows the local variables defined in
16205 - print values of all hushshell variables
16207 - print value of hushshell variable 'name'
16209 Also make the set_local_var() and unset_local_var ()
16210 no longer static, so it is possible to define local
16211 hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
16212 is defined, u-boot calls hush_init_var (), where
16213 boardspecific code can define local hush shell
16214 variables at boottime.
16216 Signed-off-by: Heiko Schocher <hs@denx.de>
16218 commit 67b23a322848d828a5e45c0567b72762bfde7abf
16219 Author: Heiko Schocher <hs@denx.de>
16220 Date: Wed Oct 15 09:39:47 2008 +0200
16222 I2C: adding new "i2c bus" Command to the I2C Subsystem.
16224 With this Command it is possible to add new I2C Busses,
16225 which are behind 1 .. n I2C Muxes. Details see README.
16227 Signed-off-by: Heiko Schocher <hs@denx.de>
16229 commit c24853644ddd2dd2e4246b5854a93e6254a14092
16230 Author: Heiko Schocher <hs@denx.de>
16231 Date: Wed Oct 15 09:39:08 2008 +0200
16233 mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
16235 As documented in doc/I2C_Edge_Conditions, adding a
16236 board specific deblocking mechanism via CFG_I2C_INIT_BOARD
16237 for the mgcoge and mgsuvd board.
16239 This code was originally written by Keymile in association
16240 with Anatech and Atmel in 1998. The Code toggels the SCL
16241 until the SCA line goes to HIGH (max. 16 times).
16242 And after this, a start condition is sent.
16244 This is another approach to deblock the I2C Bus. The
16245 soft I2C driver actually sends 9 clocks with SDA High,
16246 and then a stop at the end, to deblock the I2C Bus.
16248 Maybe we should use the approach from Keymile as
16251 Signed-off-by: Heiko Schocher <hs@denx.de>
16253 commit 4ca107effebfbabac1057c39632105dacef95957
16254 Author: Heiko Schocher <hs@denx.de>
16255 Date: Wed Oct 15 09:38:38 2008 +0200
16257 soft_i2c: Add CFG_I2C_INIT_BOARD option
16259 This patch adds the option for a boardspecific
16260 I2C deblocking mechanism for the soft i2c driver.
16262 Signed-off-by: Heiko Schocher <hs@denx.de>
16264 commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
16265 Author: Heiko Schocher <hs@denx.de>
16266 Date: Wed Oct 15 09:38:07 2008 +0200
16268 mgcoge, mgsuvd: add DTT (LM75) support.
16270 Signed-off-by: Heiko Schocher <hs@denx.de>
16272 commit 8e442df438ab677057571e3ac01846bff7719bce
16273 Author: Heiko Schocher <hs@denx.de>
16274 Date: Wed Oct 15 09:37:34 2008 +0200
16276 lm75: Make the LM75 MULTI_BUS compatible.
16278 Signed-off-by: Heiko Schocher <hs@denx.de>
16280 commit 12f1678127c1df2b2878ba93c88948bedc060775
16281 Author: Heiko Schocher <hs@denx.de>
16282 Date: Wed Oct 15 09:37:04 2008 +0200
16284 lm75: fix Codingstyle issues.
16286 Signed-off-by: Heiko Schocher <hs@denx.de>
16288 commit f2202450c75ba6934b356024101500ddcde6e2a6
16289 Author: Heiko Schocher <hs@denx.de>
16290 Date: Wed Oct 15 09:36:33 2008 +0200
16292 mgcoge, mgsuvd: added EEprom support.
16294 Signed-off-by: Heiko Schocher <hs@denx.de>
16296 commit 9661bf9d120f760238b2a073b84f2baf05010057
16297 Author: Heiko Schocher <hs@denx.de>
16298 Date: Wed Oct 15 09:36:03 2008 +0200
16300 mgcoge, mgsuvd: add I2C support.
16302 Signed-off-by: Heiko Schocher <hs@denx.de>
16304 commit 98aed379586a155292efbf3209356836584b601c
16305 Author: Heiko Schocher <hs@denx.de>
16306 Date: Wed Oct 15 09:35:26 2008 +0200
16308 soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
16310 This patch fixes the following warnings, when using
16311 the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
16314 soft_i2c.c: In function 'send_reset':
16315 soft_i2c.c:93: warning: unused variable 'immr'
16316 soft_i2c.c: In function 'send_start':
16317 soft_i2c.c:124: warning: unused variable 'immr'
16318 soft_i2c.c: In function 'send_stop':
16319 soft_i2c.c:146: warning: unused variable 'immr'
16320 soft_i2c.c: In function 'send_ack':
16321 soft_i2c.c:171: warning: unused variable 'immr'
16322 soft_i2c.c: In function 'write_byte':
16323 soft_i2c.c:196: warning: unused variable 'immr'
16324 soft_i2c.c: In function 'read_byte':
16325 soft_i2c.c:244: warning: unused variable 'immr'
16327 Signed-off-by: Heiko Schocher <hs@denx.de>
16329 commit 799b784aa00cb03a352847ab9f9acdde79b72d21
16330 Author: Heiko Schocher <hs@denx.de>
16331 Date: Wed Oct 15 09:34:45 2008 +0200
16333 i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
16335 Signed-off-by: Heiko Schocher <hs@denx.de>
16337 commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
16338 Author: Heiko Schocher <hs@denx.de>
16339 Date: Wed Oct 15 09:34:05 2008 +0200
16341 mgcoge: fix Coding Style issues.
16343 Signed-off-by: Heiko Schocher <hs@denx.de>
16345 commit e43a27c49712203fe8848a17714330623edfb2eb
16346 Author: Heiko Schocher <hs@denx.de>
16347 Date: Wed Oct 15 09:33:30 2008 +0200
16349 I2C: add new command i2c reset.
16351 If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
16352 it is not possible to get out of this, until the
16353 complete Hardware gets a reset. This new commando
16354 calls again i2c_init (and that calls i2c_init_board
16355 if defined), which will deblock the I2C Bus.
16357 Signed-off-by: Heiko Schocher <hs@denx.de>
16358 Signed-off-by: Wolfgang Denk <wd@denx.de>
16360 commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
16361 Author: Heiko Schocher <hs@denx.de>
16362 Date: Wed Oct 15 09:32:25 2008 +0200
16364 mgsuvd, mgcoge: move this 2 boards in one dir.
16366 There are some more extensions, which are for both boards
16367 and some more boards from this manufacturer will follow soon.
16369 Signed-off-by: Heiko Schocher <hs@denx.de>
16370 Signed-off-by: Wolfgang Denk <wd@denx.de>
16372 commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
16373 Author: Dirk Eibach <eibach@gdsys.de>
16374 Date: Wed Oct 8 13:44:27 2008 +0200
16376 hwmon: Add LM63 support
16378 This patch adds support for the National LM63 temperature
16379 sensor with integrated fan control. It's used on the GDSys
16380 Neo board (405EP) which will be submitted later.
16382 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
16383 Acked-by: Stefan Roese <sr@denx.de>
16385 commit 7ba890bf2f2b92831420243c058951aa831119fd
16386 Author: Kyungmin Park <kmpark@infradead.org>
16387 Date: Wed Oct 8 11:01:17 2008 +0900
16389 Add Red Black Tree support
16391 Now it's used at UBI module. Of course other modules can use it.
16392 If you want to use it, please define CONFIG_RBTREE
16394 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
16396 commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
16397 Author: richardretanubun <richardretanubun@ruggedcom.com>
16398 Date: Mon Oct 6 16:10:53 2008 -0400
16400 CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
16402 Added support for CONFIG_EFI_PARTITION to ext2 commands.
16403 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
16405 commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
16406 Author: richardretanubun <richardretanubun@ruggedcom.com>
16407 Date: Fri Sep 26 11:13:22 2008 -0400
16409 Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
16411 The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
16412 of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
16414 Based on linux/fs/partitions/efi.[ch]
16416 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
16418 commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
16419 Author: Bartlomiej Sieka <tur@semihalf.com>
16420 Date: Wed Oct 1 15:26:32 2008 +0200
16422 FIT: output image load address for type 'firmware', fix message while there
16424 Now that the auto-update feature uses the 'firmware' type for updates, it is
16425 useful to inspect the load address of such images.
16427 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16429 commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
16430 Author: Bartlomiej Sieka <tur@semihalf.com>
16431 Date: Wed Oct 1 15:26:31 2008 +0200
16433 Automatic software update from TFTP server
16435 The auto-update feature allows to automatically download software updates
16436 from a TFTP server and store them in Flash memory during boot. Updates are
16437 contained in a FIT file and protected with SHA-1 checksum.
16439 More detailed description can be found in doc/README.update.
16441 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
16442 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16444 commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
16445 Author: Bartlomiej Sieka <tur@semihalf.com>
16446 Date: Wed Oct 1 15:26:27 2008 +0200
16448 flash: factor out adjusting of Flash address to the end of sector
16450 The upcoming automatic update feature needs the ability to adjust an
16451 address within Flash to the end of its respective sector. Factor out
16452 this functionality to a new function flash_sect_roundb().
16454 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
16455 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16456 Signed-off-by: Stefan Roese <sr@denx.de>
16458 commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
16459 Author: Bartlomiej Sieka <tur@semihalf.com>
16460 Date: Wed Oct 1 15:26:29 2008 +0200
16462 net: Make TFTP server timeout configurable
16464 There are two aspects of a TFTP transfer involving timeouts:
16465 1. timeout waiting for initial server reply after sending RRQ
16466 2. timeouts while transferring actual data from the server
16468 Since the upcoming auto-update feature attempts a TFTP download during each
16469 boot, it is undesirable to have a long delay when the TFTP server is not
16470 available. Thus, this commit makes the server timeout (1.) configurable by two
16473 TftpRRQTimeoutMSecs
16474 TftpRRQTimeoutCountMax
16476 TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
16477 server, TftpRRQTimeoutCountMax overrides default number of connection retries.
16478 The total delay when trying to download a file from a non-existing TFTP server
16479 is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
16481 Timeouts during file transfers (2.) are unaffected.
16483 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
16484 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16485 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16487 commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
16488 Author: Bartlomiej Sieka <tur@semihalf.com>
16489 Date: Wed Oct 1 15:26:28 2008 +0200
16491 net: express the first argument to NetSetTimeout() in milliseconds
16493 Enforce millisecond semantics of the first argument to NetSetTimeout() --
16494 the change is transparent for well-behaving boards (CFG_HZ == 1000 and
16495 get_timer() countiing in milliseconds).
16497 Rationale for this patch is to enable millisecond granularity for
16498 network-related timeouts, which is needed for the upcoming automatic
16499 software update feature.
16501 Summary of changes:
16502 - do not scale the first argument to NetSetTimeout() by CFG_HZ
16503 - change timeout values used in the networking code to milliseconds
16505 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
16506 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16507 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16509 commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
16510 Author: richardretanubun <richardretanubun@ruggedcom.com>
16511 Date: Mon Sep 29 18:28:23 2008 -0400
16513 Adds two more ethernet interface to 83xx
16515 Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
16516 Six eth interface is chosen because the platform I am using combines
16517 UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
16519 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
16520 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16522 commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
16523 Author: Haiying Wang <Haiying.Wang@freescale.com>
16524 Date: Wed Sep 24 11:42:12 2008 -0500
16526 Change UEC PHY interface to RGMII on MPC8568MDS
16528 Change UEC phy interface from GMII to RGMII on MPC8568MDS board
16530 Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
16531 but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
16533 Now both UEC1 and UEC2 can work properly under u-boot.
16535 It is also in consistent with the kernel setting for 8568 UEC phy interface.
16537 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16538 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16540 commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
16541 Author: Wolfgang Denk <wd@denx.de>
16542 Date: Sat Oct 18 21:30:31 2008 +0200
16544 Prepare v2008.10 release: update CHANGELOG & Makefile
16546 Signed-off-by: Wolfgang Denk <wd@denx.de>
16548 commit f7a35a60cf45491871a5c28e9ad24db005487857
16549 Author: Heiko Schocher <hs@denx.de>
16550 Date: Fri Oct 17 18:24:06 2008 +0200
16552 mgcoge: add redundant environment sector
16554 Signed-off-by: Heiko Schocher <hs@denx.de>
16555 Signed-off-by: Wolfgang Denk <wd@denx.de>
16557 commit c2537ee85954af9d036b18b644f3e18d837bf4a5
16558 Author: Heiko Schocher <hs@denx.de>
16559 Date: Fri Oct 17 18:23:27 2008 +0200
16561 mgsuvd: update size of environment
16563 Signed-off-by: Heiko Schocher <hs@denx.de>
16565 commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
16566 Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
16567 Date: Thu Oct 16 13:38:00 2008 -0500
16569 83xx NAND boot: wait for LTESR[CC]
16571 At least some revisions of the 8313, and possibly other chips, do not
16572 wait for all pages of the initial 4K NAND region to be loaded before
16573 beginning execution; thus, we wait for it before branching out of the
16576 This fixes warm reset problems when booting from NAND on 8313erdb.
16578 Signed-off-by: Scott Wood <scottwood@freescale.com>
16579 Acked-by: Kim Phillips <kim.phillips@freescale.com>
16581 commit bf29e0ea0af03d593c64614136acc723a7a022a2
16582 Author: Yuri Tikhonov <yur@emcraft.com>
16583 Date: Fri Oct 17 12:54:18 2008 +0200
16585 ppc4xx: PPC44x MQ initialization
16587 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
16588 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
16589 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
16591 Previously the appropriate initialization had been made in Linux, by the
16592 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
16593 registers after normal operation has begun is not supported and could
16594 have unpredictable results.
16596 Comment from Stefan: This patch doesn't change the resulting value of the
16597 MQ registers. It explicitly sets/clears all bits to the desired state which
16598 better documents the resulting register value instead of relying on pre-set
16601 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
16602 Signed-off-by: Stefan Roese <sr@denx.de>
16604 commit ec081c2c190148b374e86a795fb6b1c49caeb549
16605 Author: Stefan Roese <sr@denx.de>
16606 Date: Fri Oct 17 12:51:46 2008 +0200
16608 ppc4xx: PPC44x MQ initialization
16610 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
16611 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
16612 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
16614 Previously the appropriate initialization had been made in Linux, by the
16615 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
16616 registers after normal operation has begun is not supported and could
16617 have unpredictable results.
16619 Comment from Stefan: This patch doesn't change the resulting value of the
16620 MQ registers. It explicitly sets/clears all bits to the desired state which
16621 better documents the resulting register value instead of relying on pre-set
16624 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
16625 Signed-off-by: Stefan Roese <sr@denx.de>
16627 commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
16628 Author: Kumar Gala <galak@kernel.crashing.org>
16629 Date: Thu Oct 16 21:58:50 2008 -0500
16631 85xx: Using proper I2C source clock divider for MPC8544
16633 The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
16634 bit 26, instead it should be bit 28. This caused in incorrect
16635 interpretation of the i2c_clk which is the same as the SEC clk on
16636 MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
16639 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16641 commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
16642 Author: Kumar Gala <galak@kernel.crashing.org>
16643 Date: Thu Oct 16 21:58:49 2008 -0500
16645 Revert "85xx: Using proper I2C source clock divider for MPC8544"
16647 This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
16649 The fix introduced by this patch is not correct. The problem is
16650 that the documentation is not correct for the MPC8544 with regards
16651 to which bit in PORDEVSR2 is for the SEC_CFG.
16653 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16655 commit 2179c4766bffeece98e5e92040629a96c97e230c
16656 Author: Kumar Gala <galak@kernel.crashing.org>
16657 Date: Wed Oct 15 10:19:41 2008 -0500
16659 85xx: Fix compile warning
16661 mpc8536ds.c: In function 'is_sata_supported':
16662 mpc8536ds.c:614: warning: unused variable 'devdisr'
16664 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16666 commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
16667 Author: Jason Jin <Jason.jin@freescale.com>
16668 Date: Wed Oct 15 10:40:24 2008 +0800
16670 Fix the function conflict in x86emu when DEBUG is on
16672 The function parse_line() in common/main.c was exposed globally by commit
16673 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
16674 name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
16675 This patch fix this by renaming the function in the debug.c file.
16677 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
16679 commit b4dbacf69a669a17487054552fc2761149dd6767
16680 Author: Wolfgang Denk <wd@denx.de>
16681 Date: Wed Oct 15 15:50:45 2008 +0200
16683 Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
16685 Signed-off-by: Wolfgang Denk <wd@denx.de>
16687 commit 374b9038293d01d8744a46af9b7854a6fd99b228
16688 Author: Heiko Schocher <hs@denx.de>
16689 Date: Wed Oct 15 09:51:19 2008 +0200
16691 Fix compiler warning in lib_ppc/board.c
16693 Fix compiler warning introduced by commit 0f8cbc18
16695 Signed-off-by: Heiko Schocher <hs@denx.de>
16696 Signed-off-by: Wolfgang Denk <wd@denx.de>
16698 commit 9724555755a6f1066636481b41f7094e0ce93a69
16699 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
16700 Date: Thu Oct 9 10:29:14 2008 +0530
16702 mpc83xx: wait till UPM completes the write to array
16704 Reference manual states that MxMR[MAD] increment is the indication
16705 of write to UPM array is complete. Honour that. Also, make the dummy
16708 also fix the comment.
16710 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
16711 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16713 commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
16714 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
16715 Date: Wed Oct 8 18:12:20 2008 -0500
16717 Remove unwanted ';' at end of define.
16719 Currently this is not creating any problem. But it will result
16720 in compilation error when used as below.
16722 printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
16724 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
16726 continuation of the theme based on git grep "^#define CFG_.*;$" include/
16728 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16730 commit b2934a56650e9a6c54432f9ce6dc36757967385e
16731 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16732 Date: Mon Oct 6 10:53:59 2008 -0400
16734 ARM DaVinci: Add maintainer information for SFFSDR board.
16736 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16738 commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
16739 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16740 Date: Sat Oct 4 19:26:16 2008 +0200
16742 api: fix type mismatch
16744 This patch fixes a type mismatch and thus removes a compiler
16745 warning when compiling with CONFIG_API on powerpc.
16747 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16749 commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
16750 Author: Peter Tyser <ptyser@xes-inc.com>
16751 Date: Wed Oct 1 12:25:04 2008 -0500
16753 cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
16755 Original code displayed:
16757 i2c i2c speed [speed] - show or set I2C bus speed
16758 i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
16761 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16763 commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
16764 Author: Wolfgang Denk <wd@denx.de>
16765 Date: Tue Oct 14 22:13:41 2008 +0200
16769 Signed-off-by: Wolfgang Denk <wd@denx.de>
16771 commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
16772 Author: Jason Jin <Jason.jin@freescale.com>
16773 Date: Fri Oct 10 11:41:01 2008 +0800
16775 Do not init SATA when disabled on 8536DS.
16777 SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
16778 driver still try to access the SATA registers, the cpu will hangup.
16779 This patch try to fix this by reading the serdes status before the SATA
16782 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
16783 Acked-by: Andy Fleming <afleming@freescale.com>
16785 commit 9dbc366744960013965fce8851035b6141f3b3ae
16786 Author: Remy Bohmer <linux@bohmer.net>
16787 Date: Fri Oct 10 10:23:22 2008 +0200
16789 The PIPE_INTERRUPT flag is used wrong
16791 At a lot of places in the code the PIPE_INTERRUPT flags and friends
16792 are used wrong. The wrong bits are compared to this flag resulting
16793 in wrong conditions. Also there are macros that should be used for
16795 This patch tries to fix them all, however, I was not able to test the
16796 changes, because I do not have any of these boards.
16800 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16801 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16803 commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
16804 Author: Remy Bohmer <linux@bohmer.net>
16805 Date: Fri Oct 10 10:23:21 2008 +0200
16807 fix USB initialisation procedure
16809 The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
16810 At some places directly 8,16,32,64 was used instead of the encoded
16811 value. Made a enum for the options to make this more clear and to help
16812 preventing similar errors in the future.
16814 After fixing this bug it became clear that another bug existed where
16815 the 'pipe' is and-ed with PIPE_* flags, where it should have been
16816 'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
16818 Also removed the triple 'get_device_descriptor' sequence, it has no use,
16819 and Windows nor Linux behaves that way.
16820 There is also a poll going on with a timeout when usb_control_msg() fails.
16821 However, the poll is useless, because the flag will never be set on a error,
16822 because there is no code that runs in a parallel that can set this flag.
16823 Changed this to something more logical.
16825 Tested on AT91SAM9261ek and compared the flow on the USB bus to what
16826 Linux is doing. There is no difference anymore in the early initialisation
16829 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16830 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16832 commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
16833 Author: Nikita V. Youshchenko <yoush@cs.msu.su>
16834 Date: Fri Oct 3 00:03:55 2008 +0400
16836 fsl_diu: fix alignment error that caused malloc corruption
16838 When aligning malloc()ed screen_base, invalid offset was added.
16839 This not only caused misaligned result (which did not cause hardware
16840 misbehaviour), but - worse - caused screen_base + smem_len to
16841 be out of malloc()ed space, which in turn caused breakage of
16842 futher malloc()/free() operation.
16844 This patch fixes screen_base alignment.
16846 Also this patch makes memset() that cleans framebuffer to be executed
16847 on first initialization of diu, not only on re-initialization. It looks
16848 correct to clean the framebuffer instead of displaying random garbage;
16849 I believe that was disabled only because that memset caused breakage
16850 of malloc/free described above - which no longer happens with the fix
16853 Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
16855 commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
16856 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16857 Date: Wed Sep 24 10:29:37 2008 +0200
16859 api: Fix building with CONFIG_API
16861 This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
16863 USB_MAX_STOR_DEV is defined in include/usb.h, but
16864 needed in api/api_storage.c.
16866 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16868 commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
16869 Author: Peter Tyser <ptyser@xes-inc.com>
16870 Date: Tue Sep 23 12:39:40 2008 -0500
16872 Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
16874 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16876 commit 81e612014c40c922ec35488d17c504d4e9286f06
16877 Author: Peter Tyser <ptyser@xes-inc.com>
16878 Date: Tue Sep 23 12:38:42 2008 -0500
16880 Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
16882 The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
16883 CFG_EEPROM_PAGE_WRITE_BITS in various temperature
16884 sensor drivers are not necessary
16886 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16888 commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
16889 Author: Mike Frysinger <vapier@gentoo.org>
16890 Date: Tue Oct 14 07:04:38 2008 -0400
16892 cmd_spi: remove broken signed casting for display
16894 Since we're working with unsigned data, you can't apply a signed pointer
16895 cast and then attempt to print the result. Otherwise you get wrong output
16896 when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
16898 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16900 commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
16901 Author: Mike Frysinger <vapier@gentoo.org>
16902 Date: Tue Oct 14 07:05:24 2008 -0400
16904 strings cmd: drop old CONFIG_CFG_STRINGS define
16906 We don't need CONFIG_CFG_STRINGS anymore now that we have the define
16907 CONFIG_CMD_STRINGS and Makefile control.
16909 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16911 commit fecb5ade3b37f62981f2b05b621005850173aaa9
16912 Author: Jason Jin <Jason.jin@freescale.com>
16913 Date: Fri Sep 19 17:32:49 2008 +0800
16915 Fix the NAND size overflow issue.
16917 When the total size of all NAND devices exceeds 4 GiB, the size will
16918 overflow. This patch tries to fix this.
16920 Note that we still have a problem when a single NAND device is bigger
16921 than 4 GiB: then the overflow would actually happen earlier, i. e.
16922 when storing the size in nand_info[].size, as nand_info[].size is an
16925 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
16926 Signed-off-by: Wolfgang Denk <wd@denx.de>
16928 commit 30f574717277238b9014b8136c90eea77196490f
16929 Author: Louis Su <louis@asix.com.tw>
16930 Date: Wed Jul 9 11:01:37 2008 +0800
16932 AX88180: new gigabit network driver
16934 Signed-off-by: Louis Su <louis@asix.com.tw>
16935 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16937 commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
16938 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16939 Date: Tue Aug 19 16:07:03 2008 +0200
16941 enable 10/100M at VSC8601 at tsec driver
16943 Currently VSC8601 doesn't link with 10/100M partners if the
16944 EEPROM/Strapping is not set up.
16945 Setting the auto-neg register fixes this.
16947 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16948 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16950 commit 702c85b0e876d587c11acdbb55738ee52acd54f4
16951 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16952 Date: Tue Sep 30 15:02:53 2008 +0900
16954 net: ne2000: Divided a function of NE2000 driver
16956 get_prom function was used __attriute__ , but it is not enable.
16957 ax88796.o does not do link besides ne2000.o. When ld is carried
16958 out, get_prom function of ax88796.c is ignored.
16959 This problem is a thing by specifications of ld.
16960 I checked and test this patch on SuperH and MIPS.
16962 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16963 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16965 commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
16966 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16967 Date: Tue Oct 14 11:10:59 2008 +0900
16969 sh: rsk7203: Add smc911x driver support to board config file
16971 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16972 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16974 commit cae6f909baf86357b3c0bd01acfc414348c4d175
16975 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16976 Date: Thu Oct 9 13:54:33 2008 +0900
16978 sh: Fix cannot execute a stand-alone application
16980 Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
16982 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16983 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16985 commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
16986 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16987 Date: Wed Oct 8 23:38:00 2008 -0500
16989 fsl_pci_init do not scan bus when configured as an end-point
16991 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16992 Acked-by: Andy Fleming <afleming@freescale.com>
16994 commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
16995 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16996 Date: Tue Sep 16 17:07:53 2008 -0400
16998 ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
17000 This is no longer necessary now that the GD_FLG_RELOC flag is set for
17003 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17005 commit d977a57356657ba241256231efca32828a5822f9
17006 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
17007 Date: Sat Sep 13 10:04:32 2008 +0200
17009 Fix lzma uncompress call (image_start wrongly used instead image_len)
17011 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
17013 commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
17014 Author: Nick Spence <nick.spence@freescale.com>
17015 Date: Thu Aug 28 14:09:15 2008 -0700
17017 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
17019 This is needed in unlock_ram_in_cache() because it is called from C and
17020 will corrupt the small data area anchor that is kept in R2.
17022 lock_ram_in_cache() is modified similarly as good coding practice, but
17023 is not called from C.
17025 Signed-off-by: Nick Spence <nick.spence@freescale.com>
17027 commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
17028 Author: Kumar Gala <galak@kernel.crashing.org>
17029 Date: Tue Aug 19 15:05:34 2008 -0500
17031 86xx: remove redudant code with lib_ppc/interrupts.c
17033 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
17034 Not know how that happened, but there is no good reason for it.
17036 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
17039 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17041 commit 0d01f66d235118515b5086b88f82498bc0695d6a
17042 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17043 Date: Thu Oct 9 01:26:36 2008 -0500
17045 CFI: cfi_flash write fix for AMD legacy
17047 The flash_unlock_seq requires a sector for AMD_LEGACY.
17048 Fix a retcode check typeo.
17050 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17051 Signed-off-by: Stefan Roese <sr@denx.de>
17053 commit 542b385a620a1783454a00424930e51895f45073
17054 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17055 Date: Tue Oct 7 13:13:10 2008 +0200
17057 ppc4xx: Fix USB 2.0 phy reset sequence
17059 This patch fixes USB 2.0 communication issues on some DU440 boards.
17061 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17062 Signed-off-by: Stefan Roese <sr@denx.de>
17064 commit df8c1ce11114c2260dedb5547281945f7db8fa5c
17065 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17066 Date: Tue Oct 7 13:13:09 2008 +0200
17068 ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
17070 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17071 Signed-off-by: Stefan Roese <sr@denx.de>
17073 commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
17074 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17075 Date: Tue Oct 7 13:13:08 2008 +0200
17077 ppc4xx: Fix DU440 GPIO configuration
17079 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17080 Signed-off-by: Stefan Roese <sr@denx.de>
17082 commit 35dd025c70fcc4389317db2f2a9d14795172137d
17083 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17084 Date: Tue Oct 7 13:13:07 2008 +0200
17086 ppc4xx: Update DU440 config
17088 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17089 Signed-off-by: Stefan Roese <sr@denx.de>
17091 commit f3bf9273939ffe1a60a32a2eef909097f15df56b
17092 Author: Kumar Gala <galak@kernel.crashing.org>
17093 Date: Wed Oct 8 15:36:39 2008 -0500
17095 MPC8572DS: Fix compile warnings
17097 Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
17100 cmd_i2c.c:112: warning: missing braces around initializer
17101 cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
17103 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17105 commit dffd2446fb041f38ef034b0fcf41e51e5e489159
17106 Author: Wolfgang Grandegger <wg@grandegger.com>
17107 Date: Tue Sep 30 10:55:57 2008 +0200
17109 85xx: Using proper I2C source clock divider for MPC8544
17111 Measurements with our MPC8544 board showed that the I2C bus frequency
17112 is wrong by a factor of 1.5. Obviously, the interpretation of the
17113 MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
17114 correct. There seems to be an error in the 8544 RM.
17116 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
17118 commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
17119 Author: Rafal Czubak <rcz@semihalf.com>
17120 Date: Wed Oct 8 13:41:30 2008 +0200
17122 FSL: Fix get_cpu_board_revision() return value.
17124 get_cpu_board_revision() returned board revision based on information stored
17125 in global static struct eeprom. It should instead use one from local struct
17126 board_eeprom, to which the data is actually read from EEPROM. The bug led to
17127 system hang after printing L1 cache information on U-Boot startup. The problem
17128 was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
17129 boards using CFG_I2C_EEPROM_CCID.
17131 The change has been successfully tested on MPC8555CDS system.
17133 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
17135 commit 747f316cca484ed627a97dd3391febabce384186
17136 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17137 Date: Tue Sep 30 20:08:49 2008 +0200
17139 update uImage FIT multi documentation
17141 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17143 commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
17144 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17145 Date: Tue Sep 30 20:08:36 2008 +0200
17147 move README.imx31 to doc/ and merge with README.mx31
17149 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17151 commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
17152 Author: Guennadi Liakhovetski <lg@denx.de>
17153 Date: Thu Sep 25 20:54:37 2008 +0200
17155 i.MX31: switch to CFG_HZ=1000
17157 Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
17158 cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
17159 provides 2% or 0.4% precision depending on the
17160 CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
17163 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
17165 commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
17166 Author: gnusercn <gnusercn@gmail.com>
17167 Date: Wed Oct 8 18:58:58 2008 +0200
17169 Fix bug: in arch-arm, env_get_char dose not work fine
17171 due to the arm implementation which supposed that U-Boot is in RAM
17172 when we jump to start_armboot
17174 Signed-off-by: gnusercn <gnusercn@gmail.com>
17175 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17177 commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
17178 Author: Adam Graham <agraham@amcc.com>
17179 Date: Mon Oct 6 10:16:13 2008 -0700
17181 ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
17183 After changing SDRAM_CLKTR phase value rerun the memory preload
17184 initialization sequence (INITPLR) to reset and relock the memory
17185 DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
17186 adjustment effects the phase relationship of the internal, to the
17187 PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
17189 Signed-off-by: Adam Graham <agraham@amcc.com>
17190 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
17191 Signed-off-by: Stefan Roese <sr@denx.de>
17193 commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
17194 Author: Haiying Wang <Haiying.Wang@freescale.com>
17195 Date: Fri Oct 3 11:48:03 2008 -0400
17197 Remove redundant #define for MPC8536DS
17199 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17201 commit 445a7b38308eb05b41de74165b20855db58c7ee5
17202 Author: Haiying Wang <Haiying.Wang@freescale.com>
17203 Date: Fri Oct 3 11:47:30 2008 -0400
17205 Add ID EEPROM support for MPC8572DS
17207 The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
17208 system information like mac addresses etc. This patch enables it.
17210 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17212 commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
17213 Author: Haiying Wang <Haiying.Wang@freescale.com>
17214 Date: Fri Oct 3 11:46:59 2008 -0400
17216 Minor fixes for I2C address on MPC8572DS
17218 MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
17219 according to the board spec, and adds the 2nd i2c bus offset.
17221 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17223 commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
17224 Author: Jason Jin <Jason.jin@freescale.com>
17225 Date: Sat Sep 27 14:40:57 2008 +0800
17227 Fix the incorrect DDR clk freq reporting on 8536DS
17229 On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
17230 The display is still sync mode DDR freq. This patch try to fix
17231 this. The display DDR freq is now the actual freq in both
17232 sync and async mode.
17234 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17236 commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
17237 Author: Kumar Gala <galak@kernel.crashing.org>
17238 Date: Tue Oct 7 10:28:46 2008 -0500
17240 85xx: Remove setting of *cache-line-size in device trees
17242 ePAPR says if the *cache-block-size is the same as *cache-line-size
17243 than we don't need the *cache-line-size property.
17245 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17247 commit a69a42338dd25408f9fd5390a83bc501749c7e1b
17248 Author: Mark Jackson <mpfj@mimc.co.uk>
17249 Date: Fri Oct 3 11:48:57 2008 +0100
17251 MIMC200 board now uses CONFIG_DISABLE_CONSOLE
17253 Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
17254 Also fixed default uImage location.
17256 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
17257 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17259 commit cd3cb0d9269d155276b00207e3816a9347fd1c92
17260 Author: Gerald Van Baren <vanbaren@cideas.com>
17261 Date: Sat Oct 4 07:56:06 2008 -0400
17263 libfdt: Fix error in documentation for fdt_get_alias_namelen()
17265 Oops, screwed up the function name in the documenting comment for this
17266 function. Trivial correction in this patch.
17268 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
17269 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
17271 commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
17272 Author: David Gibson <david@gibson.dropbear.id.au>
17273 Date: Wed Aug 20 16:55:14 2008 +1000
17275 libfdt: Add function to explicitly expand aliases
17277 Kumar has already added alias expansion to fdt_path_offset().
17278 However, in some circumstances it may be convenient for the user of
17279 libfdt to explicitly get the string expansion of an alias. This patch
17280 adds a function to do this, fdt_get_alias(), and uses it to implement
17283 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
17285 commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
17286 Author: Mike Frysinger <vapier@gentoo.org>
17287 Date: Thu Oct 2 01:55:38 2008 -0400
17289 cfi_flash: do not reset flash when probe fails
17291 The CFI flash driver starts at flash_init() which calls down into
17292 flash_get_size(). This starts by calling flash_detect_cfi(). If said
17293 function fails, flash_get_size() finishes by attempting to reset the
17294 flash. Unfortunately, it does this with an info->portwidth set to 0x10
17295 which filters down into flash_make_cmd() and that happily smashes the
17296 stack by sticking info->portwidth bytes into a cfiword_t variable that
17297 lives on the stack. On a 64bit system you probably won't notice, but
17298 killing the last 8 bytes on a 32bit system usually leads to a corrupt
17299 return address. Which is what happens on a Blackfin system.
17301 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
17302 Signed-off-by: Stefan Roese <sr@denx.de>
17304 commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
17305 Author: Stefan Roese <sr@denx.de>
17306 Date: Fri Sep 26 17:03:26 2008 +0200
17308 fdt: Overwrite /chosen node in bootm if it already exists in the dtb
17310 Set force parameter in fdt_chosen() call in do_bootm_linux() call.
17311 Without this, the chosen node is not overwritten if it already
17314 Signed-off-by: Stefan Roese <sr@denx.de>
17316 commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
17317 Author: Jon Loeliger <jdl@freescale.com>
17318 Date: Thu Sep 25 11:02:17 2008 -0500
17320 Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
17322 Using Gcc 4.3 detected this problem:
17324 ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
17325 ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
17326 occur when assuming that (X + c) < X is always false
17328 To fix the problem, treat the offset as an unsigned int.
17330 The problem report and proposed fix were provided
17331 by Steve Papacharalambous <stevep@freescale.com>.
17333 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17335 commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
17336 Author: David Gibson <david@gibson.dropbear.id.au>
17337 Date: Fri Aug 29 14:19:13 2008 +1000
17339 libfdt: Fix bugs in fdt_get_path()
17341 The current implementation of fdt_get_path() has a couple of bugs,
17342 fixed by this patch.
17344 First, contrary to its documentation, on success it returns the length
17345 of the node's path, rather than 0. The testcase is correspondingly
17346 wrong, and the patch fixes this as well.
17348 Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
17349 instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
17350 Specifically this happens when there is insufficient space even to
17351 hold the path's second last component. This behaviour is corrected,
17352 and the testcase updated to check it.
17354 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
17356 commit 33af3e6656e84660d397b5dd95abab2dccc36f83
17357 Author: Wolfgang Denk <wd@denx.de>
17358 Date: Wed Oct 1 12:34:58 2008 +0200
17360 TQM5200: enable support for ATAPI devices
17362 Signed-off-by: Wolfgang Denk <wd@denx.de>
17364 commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
17365 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17366 Date: Mon Sep 15 05:48:25 2008 +0200
17368 Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
17370 we need this due to the arm implementation which supposed that U-Boot
17371 is in RAM when we jump to start_armboot
17373 This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
17374 in order to do it for all arm board
17376 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17378 commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
17379 Author: Kim Phillips <kim.phillips@freescale.com>
17380 Date: Wed Sep 24 08:46:25 2008 -0500
17382 mpc83xx: don't disable autoboot
17384 bootdelay set to -1 'permanently' disables autobooting, even if
17385 bootcmd is specified. Change to a positive value to allow
17386 autobooting when a bootcmd is set.
17388 Reported-by: Coray Tate <Coray.Tate@freescale.com>
17389 Cc: Scott Wood <scottwood@freescale.com>
17390 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17392 commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
17393 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17394 Date: Wed Sep 24 10:42:15 2008 +0900
17396 mpc83xx: Fix typo in include/mpc83xx.h
17398 Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
17400 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17401 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17403 commit 162c41c03179727a1d14262f703c9a8bc40231fa
17404 Author: Kim Phillips <kim.phillips@freescale.com>
17405 Date: Tue Sep 23 09:38:49 2008 -0500
17407 mpc83xx: add h/w flash protection to board configs
17409 the operating system may leave flash in a h/w locked state after writing.
17410 This allows u-boot to continue to write flash by enabling h/w unlocking
17413 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17415 commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
17416 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17417 Date: Thu Sep 11 21:35:36 2008 +0400
17419 mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
17421 The spd_dram code shifts the base address, then masks 20 bits, but
17422 forgets to shift the base address back. Fix this by just masking the
17423 base address correctly.
17425 Found this bug while trying to relocate a DDR memory at the base != 0.
17427 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17428 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17430 commit 8fd4166c467a46773f80208bda1ec3b4757747bc
17431 Author: Stefan Roese <sr@denx.de>
17432 Date: Mon Sep 22 16:10:43 2008 +0200
17434 ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
17436 Depending on the configuration jumper "SATA SELECT", U-Boot disabled
17437 either one PCIe node or the SATA node in the device tree blob. This
17438 patch removes the unnecessary and even confusing warning, when the node
17439 is not found at all.
17441 Signed-off-by: Stefan Roese <sr@denx.de>
17443 commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
17444 Author: Remy Bohmer <linux@bohmer.net>
17445 Date: Fri Sep 19 13:30:06 2008 +0200
17447 Add missing device types to dev_print() in part.c
17449 Signed-off-by: Remy Bohmer <linux@bohmer.net>
17451 commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
17452 Author: Wolfgang Denk <wd@denx.de>
17453 Date: Mon Sep 22 22:23:06 2008 +0200
17455 Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
17456 eventually leads to a machine check. This change assures that DPRAM
17457 is allocated only once in that case.
17459 Signed-off-by: Gary Jennejohn <garyj@denx.de>
17460 Signed-off-by: Wolfgang Denk <wd@denx.de>
17462 commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
17463 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
17464 Date: Wed Sep 17 17:57:34 2008 +0200
17466 Fix Spartan-3 definitions.
17468 A few Spartan-3 definitions erroneously use Spartan-3E size
17469 constants. This patch fixes them.
17471 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
17473 commit 28113e1f0da4146b823ffce37680d31d5685a60b
17474 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
17475 Date: Wed Sep 17 17:41:58 2008 +0200
17477 Remove duplicate Spartan-3E definition.
17479 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
17480 Signed-off-by: Wolfgang Denk <wd@denx.de>
17482 commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
17483 Author: Anatolij Gustschin <agust@denx.de>
17484 Date: Wed Sep 17 13:46:17 2008 +0200
17486 socrates: change default mtest address range
17488 Running mtest command on socrates without specifying
17489 an address range crashes the board. This patch changes
17490 default mtest address range to prevent this behavior.
17492 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17494 commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
17495 Author: Anatolij Gustschin <agust@denx.de>
17496 Date: Wed Sep 17 12:34:45 2008 +0200
17498 socrates: fix crash after relocation
17500 Currently U-Boot crashes after relocation to RAM.
17501 Changing the CPO value of the DDR SDRAM TIMING_CFG_2
17502 register to READ_LAT + 1 (to the value it was before
17503 conversion of socrates to new DDR code) fixes the
17506 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17508 commit 562788b0a303f3528b920d81f547f5ca77ba528e
17509 Author: Anatolij Gustschin <agust@denx.de>
17510 Date: Wed Sep 17 11:45:51 2008 +0200
17512 socrates: fix SPD EEPROM address
17514 Commit be0bd8234b9777ecd63c4c686f72af070d886517
17515 changed SPD EEPROM address to 0x51 and DDR SDRAM
17516 detection stopped working. Change this address
17519 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17521 commit 023824549a370bd185d7129d9a6c86f9be7b86a8
17522 Author: Stefan Roese <sr@denx.de>
17523 Date: Mon Sep 22 11:06:50 2008 +0200
17525 Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
17527 This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
17529 Signed-off-by: Stefan Roese <sr@denx.de>
17531 commit e58c41e26cf3c8accd60311be579f452e368e97e
17532 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17533 Date: Thu Sep 18 20:13:08 2008 +0900
17535 usb: Fix compile warning of r8a66597-hcd
17537 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17538 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17540 commit b5d10a13525c07ec6374adf840d7c87553b5f189
17541 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17542 Date: Thu Sep 18 19:34:36 2008 +0900
17544 sh: Fix compile warning
17546 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17548 commit 4a065abf926f128beb36d93449defa0d690e7fef
17549 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17550 Date: Thu Sep 18 19:04:26 2008 +0900
17552 sh: Add support watchdog for SH4A core
17554 Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
17555 And fix some compile warning.
17557 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17559 commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
17560 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17561 Date: Wed Sep 17 11:45:26 2008 +0900
17563 sh: Fix typo in SH serial driver
17565 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17566 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17568 commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
17569 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17570 Date: Wed Sep 17 11:08:36 2008 +0900
17572 sh: Add support any page size and empty_zero_page to SH Linux uImage
17574 Old U-Boot supported 4KB page size only. If this version, Linux
17575 kernel can not get command line from U-Boot.
17576 SH Linux kernel can change page size and empty_zero_page.
17577 This patch support this function and fix promlem.
17579 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17580 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17582 commit ce9f99ddb59628f41dc534e892368a7d66dfc774
17583 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17584 Date: Thu Aug 28 13:40:52 2008 +0900
17586 sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
17588 Add function of smc911x, pkt_data_pull and pkt_data_push.
17590 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17591 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17593 commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
17594 Author: Wolfgang Denk <wd@denx.de>
17595 Date: Thu Sep 18 13:57:32 2008 +0200
17597 ADS5121: fix typo in "rootpath" default setting
17599 Signed-off-by: Wolfgang Denk <wd@denx.de>
17601 commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
17602 Author: Remy Bohmer <linux@bohmer.net>
17603 Date: Tue Sep 16 14:55:44 2008 +0200
17605 USB layer of U-Boot causes USB protocol errors while using USB memory sticks
17607 There are several differences between Linux, Windows and U-boot for initialising the
17608 USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
17609 things really different, and some are wrong (compared to the USB standard).
17611 This patch fixes some errors:
17612 * The NEW_init procedure that was already in the code is good, while the old procedure
17613 is wrong. See code comments for more info.
17614 * On a Control request the data returned by the device can be more than 8 bytes, while
17615 the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
17616 This results in a lot of USB sticks not being recognised, and the transmission ended
17617 frequently with a CTL:TIMEOUT Error.
17618 * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
17620 Signed-off-by: Remy Bohmer <linux@bohmer.net>
17621 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17623 commit 6f5794a6f78b313231256958fd73673c6aacc116
17624 Author: Remy Bohmer <linux@bohmer.net>
17625 Date: Tue Sep 16 14:55:43 2008 +0200
17627 Refactoring parts of the common USB OHCI code
17629 This patch refactors some large routines of the USB OHCI code by
17630 making some routines smaller and more readable which helps
17631 debugging and understanding the code. (Makes the code looks
17632 somewhat more like the Linux implementation.)
17634 Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
17636 Signed-off-by: Remy Bohmer <linux@bohmer.net>
17637 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17639 commit be19d324edc1a1d7f393d24e10d164cd94c91a00
17640 Author: Remy Bohmer <linux@bohmer.net>
17641 Date: Tue Sep 16 14:55:42 2008 +0200
17643 Fix for USB sticks not working on ARM while using GCC 4.x compilers
17645 The GCC-compiler makes an optimisation error while optimising the routine
17646 usb_set_maxpacket(). This should be fixed in the compiler in the first place,
17647 but there lots of compilers out there that makes this error, that it is
17648 probably wiser to workaround it in U-boot itself.
17650 What happens is that the register r3 is used as loop-counter 'i', but gets
17651 overwritten later on. From there it starts using register r3 for several other
17652 things and the assembler code is becoming a big mess. This is clearly a compiler bug.
17654 This error occurs on at least several versions of Code Sourcery Lite compilers
17655 for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
17656 compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
17658 We work around it by splitting up this routine in 2 parts, and making sure that
17659 the split out part is NOT inlined any longer. This will make GCC spit out assembler
17660 that do not show this problem. Another possibility is to adapt the Makefile to stop
17661 optimisation for the complete file. I think this solution is nicer.
17663 Signed-off-by: Remy Bohmer <linux@bohmer.net>
17664 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17666 commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
17667 Author: Wolfgang Denk <wd@denx.de>
17668 Date: Wed Sep 17 10:17:55 2008 +0200
17670 Coding style cleanup; update CHANEGLOG
17672 Signed-off-by: Wolfgang Denk <wd@denx.de>
17674 commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
17675 Author: Victor Gallardo <vgallardo@amcc.com>
17676 Date: Tue Sep 16 06:59:13 2008 -0700
17678 ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
17680 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
17681 Signed-off-by: Adam Graham <agraham@amcc.com>
17682 Signed-off-by: Stefan Roese <sr@denx.de>
17684 commit ce47eb402c5e29a025399dc282246414fc492940
17685 Author: Peter Tyser <ptyser@xes-inc.com>
17686 Date: Tue Sep 16 10:04:47 2008 -0500
17688 Support for multiple SGMII/TBI interfaces for TSEC ethernet
17690 Fix TBI PHY accesses to use the proper offset in CPU register space. The
17691 previous code would incorrectly access the TBI PHY by reading/writing to CPU
17692 register space at the same location as would be used to access external PHYs.
17694 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
17695 Acked-by: Andy Fleming <afleming@freescale.com>
17697 commit 7c803be2eb3cae245dedda438776e08fb122250f
17698 Author: Wolfgang Denk <wd@denx.de>
17699 Date: Tue Sep 16 18:02:19 2008 +0200
17701 TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
17703 After switching to using the CFI flash driver, the correct remapping
17704 of the flash banks was forgotten.
17706 Also, some boards were not adapted, and the old legacy flash driver
17707 was not removed yet.
17709 Signed-off-by: Wolfgang Denk <wd@denx.de>
17711 commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
17712 Author: Wolfgang Denk <wd@denx.de>
17713 Date: Sun Sep 14 00:59:35 2008 +0200
17715 Prepare v2008.10-rc2
17717 Signed-off-by: Wolfgang Denk <wd@denx.de>
17719 commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
17720 Author: Wolfgang Denk <wd@denx.de>
17721 Date: Sat Sep 13 02:23:05 2008 +0200
17723 Coding style cleanup, update CHANGELOG
17725 Signed-off-by: Wolfgang Denk <wd@denx.de>
17727 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
17728 Author: Peter Tyser <ptyser@xes-inc.com>
17729 Date: Wed Sep 10 09:18:34 2008 -0500
17731 Update mailing list email and archive addresses
17733 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
17735 commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
17736 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
17737 Date: Thu Sep 11 15:40:01 2008 +0200
17739 85xx: socrates: autoprobe Lime chip
17741 This patch is an attempt to implement autoprobing for the Lime
17742 presence on the bus.
17743 Configure GPCM for Lime CS2 and try to access chip ID registers.
17744 Second read atempt delivers register values if the chip is present.
17746 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17748 commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
17749 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
17750 Date: Thu Sep 11 15:40:01 2008 +0200
17752 85xx: socrates: Add support for new image format.
17754 Signed-off-by: Detlev Zundel <dzu@denx.de>
17756 commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
17757 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17758 Date: Thu Sep 11 17:28:18 2008 +0900
17760 sh: Fix compile error for r2dplus
17762 netdev.h was not include by r2dplus.
17764 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
17766 commit 56844a22b76c719e600047e23b80465a44d76abd
17767 Author: Heiko Schocher <hs@denx.de>
17768 Date: Thu Sep 11 08:11:23 2008 +0200
17770 powerpc: Fix bootm to boot up again with a Ramdisk
17772 Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
17773 and this stopped Linux from booting with a Ramdisk. This patch fixes
17774 this, by deleting the useless dummy mem reservation.
17776 When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
17777 added to of_size, so we dont need anymore a dummy mem reservation.
17779 I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
17780 system (=0x44 bytes) and rounded it up to 0x80).
17782 Signed-off-by: Heiko Schocher <hs@denx.de>
17783 Acked-by: Kumar Gala <galak@kernel.crashing.org>
17785 commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
17786 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
17787 Date: Mon Sep 8 02:46:13 2008 +0200
17789 Add support for LZMA uncompression algorithm.
17791 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
17792 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17794 commit 0008b6d968160abe2bfd936493f3a516a7c8da20
17795 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17796 Date: Fri Jun 27 23:04:20 2008 +0400
17798 fsl_elbc_nand: ecclayout cleanups
17800 This patch deletes oobavail assignments, they're calculated by the nand
17801 core code in nand_scan_tail, plus current oobavail values are wrong for
17804 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17805 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
17806 Signed-off-by: Scott Wood <scottwood@freescale.com>
17808 commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
17809 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17810 Date: Fri Jun 27 23:04:13 2008 +0400
17812 fsl_elbc_nand: implement support for flash-based BBT
17814 This patch implements support for flash-based BBT for chips working
17815 through ELBC NAND controller, so that NAND core will not have to re-scan
17816 for bad blocks on every boot.
17818 Because ELBC controller may provide HW-generated ECCs we should adjust
17819 bbt pattern and bbt version positions in the OOB free area.
17821 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17822 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
17823 Signed-off-by: Scott Wood <scottwood@freescale.com>
17825 commit 97ae023648e764f794ffb9c52da109d6caf09c47
17826 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17827 Date: Fri Jun 27 23:04:04 2008 +0400
17829 fsl_elbc_nand: fix OOB workability for large page NAND chips
17831 For large page chips, nand_bbt is looking into OOB area, and checking
17832 for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
17833 reserved for bbt means.
17835 But ELBC driver is specifying ecclayout so that oobfree area starts at
17836 offset 1, so only one byte left for the bbt purposes.
17838 This causes problems with any OOB users, namely JFFS2: after first mount
17839 JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
17841 OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
17842 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
17843 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
17844 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
17846 And on the next boot, NAND core will rescan for bad blocks, then will
17847 see "0xff 0x19" pattern, and will mark all blocks as bad ones.
17849 To fix the issue we should implement our own bad block pattern: just one
17850 byte at OOB start. Though, this will work only for x8 chips. For x16
17851 chips two bytes must be checked. Since ELBC driver does not support x16
17852 NANDs (yet), we're safe for now.
17854 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17855 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
17856 Signed-off-by: Scott Wood <scottwood@freescale.com>
17858 commit 7238ada313057a85409485b8ee21515dc10c07a5
17859 Author: Wolfgang Denk <wd@denx.de>
17860 Date: Fri Sep 12 13:52:21 2008 +0200
17862 MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
17864 Signed-off-by: Wolfgang Denk <wd@denx.de>
17866 commit b18410e508a12ba0a177dfc2a386857c806fa96d
17867 Author: Stefan Roese <sr@denx.de>
17868 Date: Thu Sep 11 13:05:56 2008 +0200
17870 ppc4xx: Enable device tree (FDT) support in zeus board port
17872 Signed-off-by: Stefan Roese <sr@denx.de>
17874 commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
17875 Author: Stefan Roese <sr@denx.de>
17876 Date: Wed Sep 10 16:53:47 2008 +0200
17878 ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
17880 This patch fixes a problem introdiced with patch
17881 bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
17884 The boards affected are:
17891 Signed-off-by: Stefan Roese <sr@denx.de>
17893 commit 61737c59a3285f6fadf96a5836879898c04ec28d
17894 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17895 Date: Thu Sep 11 19:41:26 2008 -0400
17897 ppc4xx: Add .gitignore file to xilinx-ppc440 boards
17899 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17900 Signed-off-by: Stefan Roese <sr@denx.de>
17902 commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
17903 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17904 Date: Thu Sep 11 19:41:25 2008 -0400
17906 ppc4xx: Fix compilation of v5fx30teval_flash
17908 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17909 Signed-off-by: Stefan Roese <sr@denx.de>
17911 commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
17912 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17913 Date: Wed Sep 10 17:44:30 2008 -0400
17915 ppc4xx: Fix in-tree build for ppc440-generic boards
17917 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17918 Signed-off-by: Stefan Roese <sr@denx.de>
17920 commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
17921 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17922 Date: Fri Sep 12 02:20:47 2008 +0200
17924 ARM: synchronize mach-types.h with linux 2.6.27-rc6
17926 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17928 commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
17929 Author: Jens Scharsig <esw@bus-elektronik.de>
17930 Date: Fri Sep 12 02:20:47 2008 +0200
17932 at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
17934 This patch prevents linker error on AT91RM9200 boards, if
17935 CONFIG_CMD_I2_TREE is set.
17936 It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
17938 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
17940 commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
17941 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17942 Date: Fri Sep 12 02:20:47 2008 +0200
17944 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
17946 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
17948 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17950 commit 03db53335c8eba656a7c44d1555b1a4514383e33
17951 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
17952 Date: Fri Sep 12 02:20:46 2008 +0200
17954 make: Remove redundant __ARM__ addition when cross-compiling on *BSD
17956 __ARM__ is given by arm_config.mk automatically.
17958 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
17960 commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
17961 Author: Claudio Scordino <claudio@evidence.eu.com>
17962 Date: Fri Sep 12 02:20:46 2008 +0200
17964 Fix MACH_TYPE for the AT91RM9200DK board.
17966 Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
17968 commit 274737e5eb25b2bcd3af3a96da923effd543284f
17969 Author: Andrew Dyer <adyer@righthandtech.com>
17970 Date: Fri Sep 12 02:20:46 2008 +0200
17972 i.mx change get_timer(base) to return time since base
17974 This patch changes get_timer() for i.MX to return the time since
17975 'base' instead of the time since the counter was at zero.
17977 Symptom seen is flash timeout errors when erasing or programming a
17978 sector using the common cfi flash code.
17980 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
17982 commit 48fed40575b3e8eae960eb0141509ddd9a73012a
17983 Author: Andrew Dyer <adyer@righthandtech.com>
17984 Date: Fri Sep 12 02:20:46 2008 +0200
17986 i.MX use u-boot baud rate and don't assume UART master clock
17988 1) Change the i.MX serial driver to use the baud rate set in the
17991 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
17993 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
17994 one to clear" like other status bits in the reg.)
17996 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
17998 commit 6e1551a870d360805b9d172dc56d935064abe71d
17999 Author: Andrew Dyer <adyer@righthandtech.com>
18000 Date: Fri Sep 12 02:20:46 2008 +0200
18002 arm920t fix constant error in start.S
18004 Code in cpu/arm920t/start.S will die with a compilation error if
18005 CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
18006 the ARM sub instruction. Change the code so that each is subtracted
18007 independently to avoid the error.
18009 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
18011 commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
18012 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
18013 Date: Fri Sep 12 02:20:40 2008 +0200
18015 ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
18017 - Correct Invalid #define of MPUTIM_PTV_MASK for
18018 omap1510 & omap730 register definition
18020 MPUTIM_PTV_MASK is defined as
18021 #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
18023 while it should have been
18024 #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
18026 - Below Patch corrects the same
18028 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
18030 commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
18031 Author: Adrian Filipi <adrian.filipi@eurotech.com>
18032 Date: Fri Jul 18 11:52:02 2008 -0400
18034 Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
18036 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
18038 commit eb16135df20535b0d19969f50fb5bd17f95e9c25
18039 Author: Guennadi Liakhovetski <lg@denx.de>
18040 Date: Thu Aug 28 12:25:11 2008 +0200
18042 i.MX31: document timer precision option
18044 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
18046 commit 1a6337b01351b82a45b0defa76f08744511c580b
18047 Author: Magnus Lilja <lilja.magnus@gmail.com>
18048 Date: Fri Aug 29 10:36:18 2008 +0200
18050 i.MX31: Make the SPI bus and chip select configurable for MC13783
18052 The i.MX31 has three SPI buses and each bus has several chip selects
18053 and the MC13783 chip can be connected to any of these. The current
18054 RTC driver for MC13783 is hardcoded for CSPI2/SS2.
18056 This patch makes make MC13783 SPI bus and chip select configurable
18057 via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
18059 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
18061 commit 8c4ebec25b21e355b8488698ec1594da9701fff4
18062 Author: Magnus Lilja <lilja.magnus@gmail.com>
18063 Date: Fri Aug 29 10:36:17 2008 +0200
18065 i.MX31: Add reset_timer() and modify get_timer_masked().
18067 This patch adds the reset_timer() function (needed by nand_base.c) and
18068 modifies the get_timer_masked() to work in the same way as the omap24xx
18071 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
18073 commit deeec4991a55de243787002ede24d2331d234fc8
18074 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18075 Date: Wed Sep 10 22:48:09 2008 +0200
18077 ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
18079 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18081 commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
18082 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18083 Date: Wed Sep 10 22:48:09 2008 +0200
18085 bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
18087 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18089 commit 0e8d158664a913392cb01fb11a948d83f72e105e
18090 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18091 Date: Wed Sep 10 22:48:06 2008 +0200
18093 rename CFG_ENV macros to CONFIG_ENV
18095 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18097 commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
18098 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18099 Date: Wed Sep 10 22:48:05 2008 +0200
18101 nvedit: rename error comment to CONFIG_ENV_IS_IN_
18103 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18105 commit b64b775e7546ed138df360ceb3a71ee358cb9a01
18106 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18107 Date: Wed Sep 10 22:48:05 2008 +0200
18109 cmd_mem: Move conditional compilation to Makefile
18111 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18113 commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
18114 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18115 Date: Wed Sep 10 22:48:05 2008 +0200
18117 move cmd_get_data_size to command.c
18119 add CMD_DATA_SIZE macro to enable it
18121 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18123 commit 507641d2491980531932b9f25dab37fe5e6c3a1a
18124 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18125 Date: Wed Sep 10 22:48:04 2008 +0200
18127 env_flash: Move conditional compilation to Makefile
18129 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18131 commit 5a1aceb0689e2f731491838970884a673ef7e7d3
18132 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18133 Date: Wed Sep 10 22:48:04 2008 +0200
18135 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
18137 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18139 commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
18140 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18141 Date: Wed Sep 10 22:48:03 2008 +0200
18143 cleanup use of CFG_ENV_IS_IN_FLASH
18145 - #if CFG_ENV_IS_IN_FLASH
18146 - #if (CFG_ENV_IS_IN_FLASH == 1)
18147 - #define CFG_ENV_IS_IN_FLASH 0
18149 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18151 commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
18152 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18153 Date: Wed Sep 10 22:48:01 2008 +0200
18155 rename environment.c in env_embedded.c to reflect is functionality
18157 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18159 commit c0878af6e32f0fd8e13a6ca315b9add64441115a
18160 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18161 Date: Wed Sep 10 22:48:01 2008 +0200
18163 env_nowhere: Move conditional compilation to Makefile
18165 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18167 commit 93f6d72544da4510a146bc4c93d609b0116cde37
18168 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18169 Date: Wed Sep 10 22:48:00 2008 +0200
18171 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
18173 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18175 commit 2556ef78113b5f089dfcac5da90bf31dd568397b
18176 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18177 Date: Wed Sep 10 22:48:00 2008 +0200
18179 env_sf: Move conditional compilation to Makefile
18181 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18183 commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
18184 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18185 Date: Wed Sep 10 22:48:00 2008 +0200
18187 rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
18189 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18191 commit 55c5f49910ec8225347aa1d211352a84de6649b4
18192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18193 Date: Wed Sep 10 22:48:00 2008 +0200
18195 env_onenand: Move conditional compilation to Makefile
18197 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18199 commit 9656138ff1a34d4c4768db6b490deffc40ee674b
18200 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18201 Date: Wed Sep 10 22:47:59 2008 +0200
18203 rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
18205 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18207 commit 957a0e69575683efd70ace147746bbb3d8e7c501
18208 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18209 Date: Wed Sep 10 22:47:59 2008 +0200
18211 env_nvram: Move conditional compilation to Makefile
18213 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18215 commit 9314cee6917444ab88bd4e758da7a30975120187
18216 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18217 Date: Wed Sep 10 22:47:59 2008 +0200
18219 rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
18221 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18223 commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
18224 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18225 Date: Wed Sep 10 22:47:59 2008 +0200
18227 env_nand: Move conditional compilation to Makefile
18229 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18231 commit 51bfee192099206a4397f15f3b93516e01f58ab0
18232 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18233 Date: Wed Sep 10 22:47:58 2008 +0200
18235 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
18237 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18239 commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
18240 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18241 Date: Wed Sep 10 22:47:58 2008 +0200
18243 env_dataflash: Move conditional compilation to Makefile
18245 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18247 commit 057c849c45b9ee19df8ff3acdeee66be52819962
18248 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18249 Date: Wed Sep 10 22:47:58 2008 +0200
18251 rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
18253 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18255 commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
18256 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18257 Date: Wed Sep 10 22:47:52 2008 +0200
18259 cmd_eeprom: Move conditional compilation to Makefile
18261 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18263 commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
18264 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18265 Date: Fri Sep 5 09:19:54 2008 +0200
18267 env_eeprom: Move conditional compilation to Makefile
18269 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18271 commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
18272 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18273 Date: Fri Sep 5 09:19:30 2008 +0200
18275 rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
18277 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18279 commit 32628c5008105a732212003d83b75f05e5243bb2
18280 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18281 Date: Sat Aug 30 23:54:58 2008 +0200
18283 cmd_mac: Move conditional compilation to Makefile
18285 finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
18286 start in commit ad8f8687b78c3e917b173f038926695383c55555
18288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18290 commit e5648acab153f0f429bfc714902c5aaa7879f71b
18291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18292 Date: Sat Aug 30 23:47:41 2008 +0200
18294 cmd_fdc: Move conditional compilation to Makefile
18296 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18298 commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
18299 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18300 Date: Sat Aug 30 23:47:38 2008 +0200
18302 common/Makefile: add core command section
18304 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18306 commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
18307 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18308 Date: Sat Aug 30 23:29:57 2008 +0200
18310 cmd_vfd: Move conditional compilation to Makefile
18312 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18314 commit 6644641d072aee3087da129d8443187196a4d8a9
18315 Author: Scott Wood <scottwood@freescale.com>
18316 Date: Wed Sep 10 11:48:49 2008 -0500
18318 delta, zylonite: Update nand_oobinfo to nand_ecclayout.
18320 This is part of the switch to newer upstream MTD code.
18322 Signed-off-by: Scott Wood <scottwood@freescale.com>
18324 commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
18325 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
18326 Date: Sat Aug 30 17:06:55 2008 -0400
18328 ARM DaVinci: Fix broken HW ECC for large page NAND.
18330 Based on original patch by Bernard Blackham <bernard@largestprime.net>
18332 U-boot's HW ECC support for large page NAND on Davinci is completely
18333 broken. Some kernels, such as the 2.6.10 one supported by
18334 MontaVista for DaVinci, rely upon this broken behaviour as they
18335 share the same code for ECCs. In the existing scheme, error
18336 detection *might* work on large page, but error correction
18337 definitely does not. Small page ECC correction works, but the
18338 format is not compatible with the mainline git kernel.
18340 This patch adds ECC code that matches what is currently in the
18341 Davinci git repository (since NAND support was added in 2.6.24).
18342 This makes the ECC and OOB layout written by u-boot compatible with
18343 Linux for both small page and large page devices and fixes ECC
18344 correction for large page devices.
18346 The old behaviour can be restored by defining the macro
18347 CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
18349 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
18350 Acked-by: Sergey Kubushyn <ksi@koi8.net>
18351 Signed-off-by: Scott Wood <scottwood@freescale.com>
18353 commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
18354 Author: Heiko Schocher <hs@denx.de>
18355 Date: Wed Sep 10 11:15:28 2008 +0200
18357 muas3001: update BR4 settings
18359 Also set up the port pins for using I2C.
18361 Signed-off-by: Heiko Schocher <hs@denx.de>
18363 commit 3591293509e0c0bcf244b0f974775bff2e25697e
18364 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
18365 Date: Wed Sep 10 09:43:49 2008 +0300
18367 autoscr: Fix one-character lines and non-newline terminated scripts
18369 When not using hush, the autoscr command now executes lines that are
18370 only one character long. It also runs the last line of scripts even if
18371 it does not end in a newline.
18373 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
18375 commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
18376 Author: Victor Gallardo <vgallardo@amcc.com>
18377 Date: Tue Sep 9 15:13:29 2008 -0700
18379 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
18381 On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
18384 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
18386 commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
18387 Author: Heiko Schocher <hs@denx.de>
18388 Date: Mon Sep 8 10:21:11 2008 +0200
18390 muas3001: added support for the LM75 sensor.
18392 Signed-off-by: Heiko Schocher <hs@denx.de>
18394 commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
18395 Author: Heiko Schocher <hs@denx.de>
18396 Date: Mon Sep 8 10:20:19 2008 +0200
18398 muas3001: activate WDT for the muas3001 board.
18400 Signed-off-by: Heiko Schocher <hs@denx.de>
18402 commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
18403 Author: Heiko Schocher <hs@denx.de>
18404 Date: Mon Sep 8 10:19:36 2008 +0200
18406 muas3001: added 64MB SDRAM autodetection.
18408 Signed-off-by: Heiko Schocher <hs@denx.de>
18410 commit 5251469943895de4bb9a04d5053352cc22acb7d5
18411 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
18412 Date: Thu Aug 21 07:12:26 2008 -0700
18414 Fix printf errors under -DDEBUG
18416 Fix printf format-string/arg mismatches under -DDEBUG.
18418 These warnings occur with DEBUG defined for a platform using
18419 cpu/mpc85xx. Users of other architectures can unearth similar
18420 problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
18421 after "CFLAGS += $(call cc-option,-fno-stack-protector)".
18423 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
18424 Signed-off-by: Andy Fleming <afleming@freescale.com>
18426 commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
18427 Author: Wolfgang Denk <wd@denx.de>
18428 Date: Tue Sep 9 23:55:18 2008 +0200
18430 Update CHANGELOG, prepare 2008-10-rc1 release
18432 Signed-off-by: Wolfgang Denk <wd@denx.de>
18434 commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
18435 Author: Kumar Gala <galak@kernel.crashing.org>
18436 Date: Mon Sep 8 08:51:29 2008 -0500
18438 85xx: Ensure timebase is zero on secondary cores
18440 The e500um says the timebase is volatile out of reset. To ensure
18441 TB sync works we need to make sure its zero.
18443 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18445 commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
18446 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18447 Date: Tue Sep 9 22:18:24 2008 +0200
18449 bootm_load_os: fix load_end debug message
18451 print load_end value not pointer
18453 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18455 commit 1d9af0be764960e6cc1c093e97176c3542796820
18456 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18457 Date: Tue Sep 9 22:18:23 2008 +0200
18459 bootm: enable fdt support only on ppc, m68k and sparc
18461 ...as done in image.c
18463 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18465 commit 748b5274e76f81df85cfcffaffedc323678d0623
18466 Author: Markus Heidelberg <markus.heidelberg@web.de>
18467 Date: Tue Sep 9 18:51:05 2008 +0200
18469 common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
18471 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
18473 commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
18474 Author: Markus Heidelberg <markus.heidelberg@web.de>
18475 Date: Tue Sep 9 17:31:46 2008 +0200
18477 gitignore: add tags files and Vim swap file
18479 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
18481 commit 1d9b67b23fca6a25154333733204339802510720
18482 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
18483 Date: Tue Sep 9 17:52:47 2008 +0900
18485 add board_eth_init() for sh7785lcr board
18487 Fix the problem that cannot work RTL8169 on sh7785lcr board.
18489 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
18491 commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
18492 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18493 Date: Wed Aug 6 16:08:41 2008 -0500
18495 mtd: SPI Flash: Support the STMicro Flash
18497 Add MTD SPI Flash support for M25P16, M25P20, M25P32,
18498 M25P40, M25P64, M25P80, M25P128.
18500 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
18501 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18503 commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
18504 Author: Wolfgang Denk <wd@denx.de>
18505 Date: Tue Sep 9 17:55:31 2008 +0200
18507 trab: fix build problem after change to use do_div()
18509 We must link with libgeneric now.
18511 Signed-off-by: Wolfgang Denk <wd@denx.de>
18513 commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
18514 Author: Ryan CHEN <ryan.chen@st.com>
18515 Date: Wed Aug 20 13:00:17 2008 -0400
18517 Correct drv_usb_kbd_init function
18519 The patch is that check if usb_get_dev_index() function return valid
18520 pointer. If valid, continue. Otherwise return -1.
18522 Signed-off-by: Ryan Chen <ryan.chen@st.com>
18523 Acked-by: Markus Klotzbuecher <mk@denx.de>
18525 commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
18526 Author: Remy Bohmer <linux@bohmer.net>
18527 Date: Wed Aug 20 11:22:02 2008 +0200
18529 Make usb-stop() safe to call multiple times in a row.
18531 A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
18532 enabled the usb_stop() command in common/cmd_bootm.c which was
18533 not enabled for some time, because no board did actually set the
18534 CFG_CMD_USB flag. So, now the usb_stop() is executed before
18535 loading the linux kernel.
18537 However, the usb_ohci driver hangs up (at least on AT91SAM) if the
18538 driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
18539 If some other piece of code calls usb_stop() before the bootm command,
18540 this command will hangup the system during boot.
18541 (usb start and stop is typically used while booting from usb memory stick)
18543 But, stopping the usb stack twice is useless anyway, and a flag already
18544 existed that kept track on the usb_init()/usb_stop() calls.
18545 So, we now check if the usb stack is really started before we stop it.
18547 This problem is now fixed in both the upper as low-level layer.
18549 Signed-off-by: Remy Bohmer <linux@bohmer.net>
18550 Acked-by: Markus Klotzbuecher <mk@denx.de>
18552 commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
18553 Author: Wolfgang Denk <wd@denx.de>
18554 Date: Tue Sep 9 16:55:47 2008 +0200
18556 Makefile: fix bug introduced by commit 47ffd6c2
18558 commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
18559 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18560 Date: Tue Sep 9 10:00:33 2008 -0400
18562 ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
18564 This patch solves the problems compiling ml507, v5fx30teval and
18565 ppc440-generic out of tree.
18567 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18569 commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
18570 Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
18571 Date: Thu Sep 4 15:35:46 2008 -0300
18573 Fix dev_print when called from usb_stor_info (usb storage command)
18575 Fix output of the usb storage command. It was printing "Device 0: not
18576 available" because IF_TYPE_USB was not included into the switch
18579 Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
18581 commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
18582 Author: Bartlomiej Sieka <tur@semihalf.com>
18583 Date: Tue Sep 9 12:58:16 2008 +0200
18585 FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
18587 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18589 commit 919f550dc11a13abf01c6bc713c968de790b8d7c
18590 Author: Bartlomiej Sieka <tur@semihalf.com>
18591 Date: Tue Sep 9 12:58:15 2008 +0200
18593 FIT: add ability to check hashes of all images in FIT, improve output
18595 - add function fit_all_image_check_hashes() that verifies if all
18596 hashes of all images in the FIT are valid
18597 - improve output of fit_image_check_hashes() when the hash check fails
18599 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18601 commit 1de1fa408967cef6804bb046b904114519bb36f0
18602 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18603 Date: Mon Sep 8 20:54:39 2008 +0200
18605 qemu_mips: Update linux bootm to support dynamic cmdline
18607 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18609 commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
18610 Author: Peter Tyser <ptyser@xes-inc.com>
18611 Date: Mon Sep 8 14:56:49 2008 -0500
18613 Add support for booting of INTEGRITY operating system uImages
18615 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
18617 commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
18618 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18619 Date: Mon Sep 8 21:01:29 2008 +0200
18621 mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
18623 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18625 commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
18626 Author: Kumar Gala <galak@kernel.crashing.org>
18627 Date: Mon Sep 8 13:57:12 2008 -0500
18629 Remove support for booting ARTOS images
18631 Pantelis Antoniou stated:
18632 AFAIK, it is still used but the products using PPC are long gone.
18633 Nuke it plz (from orbit).
18635 So remove it since it cleans up a usage of env_get_char outside of
18636 the environment code.
18638 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18640 commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
18641 Author: Wolfgang Denk <wd@denx.de>
18642 Date: Tue Sep 9 15:45:18 2008 +0200
18644 Makefile: compile and link each module just once
18646 Several source files need to be compiled and linked when one or more
18647 config options are selected. To allow for easy selection in the
18648 Makefiles yet to avoild multiple compilation (which costs build time)
18649 and especially multiple linking (which causes errors), we use
18650 "COBJS = $(sort COBJS-y)" which eliminates duplicates.
18652 By courtesy of Detlev Zundel who suggested this approach.
18654 Signed-off-by: Wolfgang Denk <wd@denx.de>
18656 commit 48d0192fe869948fef14b460b5f0c85bca933693
18657 Author: Andreas Engel <andreas.engel@ericsson.com>
18658 Date: Mon Sep 8 14:30:53 2008 +0200
18660 Moved conditional compile into Makefile
18662 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
18664 commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
18665 Author: Andreas Engel <andreas.engel@ericsson.com>
18666 Date: Mon Sep 8 10:17:31 2008 +0200
18668 Merged serial_pl010.c and serial_pl011.c.
18670 They only differ in the init function.
18671 This also adds the missing watchdog support for the PL011.
18673 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
18675 commit 0817d688f307ee2c0598e79175c94a40ce90337b
18676 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18677 Date: Sun Sep 7 17:10:27 2008 -0400
18679 Remove gap fill in srec object v2
18681 SREC files do not need gap fill: The load address is specified in the
18682 file. On the other hand, it can't be avoided in a .bin object. It has
18683 no information about memory location.
18685 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18687 commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
18688 Author: Markus Heidelberg <markus.heidelberg@web.de>
18689 Date: Sun Sep 7 20:18:27 2008 +0200
18691 README: fix missing subdirectory in the documentation
18693 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
18695 commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
18696 Author: Graeme Russ <graeme.russ@gmail.com>
18697 Date: Sun Sep 7 07:08:42 2008 +1000
18699 Update i386 code (sc520_cdp)
18701 Attempt to bring i386 / sc520 inline with master
18703 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
18705 commit 5608692104efa8d56df803dc79ea41ac3607eee5
18706 Author: Guennadi Liakhovetski <lg@denx.de>
18707 Date: Thu Sep 4 13:01:49 2008 +0200
18709 fw_env: add NAND support
18711 Add support for environment in NAND with automatic NOR / NAND recognition,
18712 including unaligned environment, bad-block skipping, redundant environment
18715 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
18717 commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
18718 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18719 Date: Tue Sep 9 09:50:24 2008 +0200
18721 ppc4xx: Fix out-of-tree building of CPCI405 variants
18723 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18724 Acked-by: Stefan Roese <sr@denx.de>
18726 commit 59f630588e3fdbd698a0a2798e52a8924e899563
18727 Author: Sergei Poselenov <sposelenov@emcraft.com>
18728 Date: Fri Aug 15 15:42:11 2008 +0200
18730 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
18732 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18734 commit e64987a892353f3d49eb242d997820ef8f538912
18735 Author: Anatolij Gustschin <agust@denx.de>
18736 Date: Fri Aug 15 15:42:13 2008 +0200
18738 85xx: socrates: Enable Lime support.
18740 This patch adds Lime GDC support together with support for the PWM
18741 backlight control through the w83782d chip. The reset pin of the
18742 latter is attached to GPIO, so we need to reset it in
18743 early_board_init_r.
18745 Signed-off-by: Anatolij Gustschin <agust@denx.de>
18747 commit 3e79b588b5199f35016f178fc0d5d1266382097f
18748 Author: Detlev Zundel <dzu@denx.de>
18749 Date: Fri Aug 15 15:42:12 2008 +0200
18751 85xx: Socrates: Major code update.
18753 - Update the local bus ranges in the FDT for Linux for the various
18754 devices connected to the local bus via chip-select.
18756 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
18757 lower than 66 MHz and uses I/O accessor functions consequently.
18761 - Update of default environment and configuration. Use I2C multibus
18762 as we do have two I2C buses. Also enable sdram and ext2 commands.
18764 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
18765 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18766 Signed-off-by: Detlev Zundel <dzu@denx.de>
18768 commit e8d18541c6ceab821f75faab031740b33fdbfa4b
18769 Author: Timur Tabi <timur@freescale.com>
18770 Date: Fri Jul 18 16:52:23 2008 +0200
18772 Update Freescale 85xx boards to sys_eeprom.c
18774 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
18775 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
18776 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
18777 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
18779 Signed-off-by: Timur Tabi <timur@freescale.com>
18781 commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
18782 Author: Wolfgang Denk <wd@denx.de>
18783 Date: Tue Sep 9 10:08:02 2008 +0200
18785 lib_ppc/interrupts.c: make board_show_activity() a weak function
18787 This allows to use show_activity() without having to
18788 define an empty board_show_activity() function.
18790 Signed-off-by: Wolfgang Denk <wd@denx.de>
18792 commit fe876787f8743883ce58fed61525eaa2f34da4c5
18793 Author: Wolfgang Denk <wd@denx.de>
18794 Date: Tue Sep 9 10:06:44 2008 +0200
18796 stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
18798 Signed-off-by: Wolfgang Denk <wd@denx.de>
18800 commit 965de106ba8900372c8b16dc60d5acab7f925e38
18801 Author: Wolfgang Denk <wd@denx.de>
18802 Date: Tue Sep 9 10:03:47 2008 +0200
18804 NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
18806 Signed-off-by: Wolfgang Denk <wd@denx.de>
18808 commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
18809 Author: Sergei Poselenov <sposelenov@emcraft.com>
18810 Date: Fri Aug 15 15:42:11 2008 +0200
18812 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
18814 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18816 commit 36241ca29d4804a1006fb3f26069effda5202581
18817 Author: Anatolij Gustschin <agust@denx.de>
18818 Date: Fri Aug 15 15:42:13 2008 +0200
18820 85xx: socrates: Enable Lime support.
18822 This patch adds Lime GDC support together with support for the PWM
18823 backlight control through the w83782d chip. The reset pin of the
18824 latter is attached to GPIO, so we need to reset it in
18825 early_board_init_r.
18827 Signed-off-by: Anatolij Gustschin <agust@denx.de>
18829 commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
18830 Author: Detlev Zundel <dzu@denx.de>
18831 Date: Fri Aug 15 15:42:12 2008 +0200
18833 85xx: Socrates: Major code update.
18835 - Update the local bus ranges in the FDT for Linux for the various
18836 devices connected to the local bus via chip-select.
18838 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
18839 lower than 66 MHz and uses I/O accessor functions consequently.
18843 - Update of default environment and configuration. Use I2C multibus
18844 as we do have two I2C buses. Also enable sdram and ext2 commands.
18846 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
18847 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18848 Signed-off-by: Detlev Zundel <dzu@denx.de>
18850 commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
18851 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18852 Date: Tue Sep 9 01:22:39 2008 +0200
18854 disk-on-chip: remove duplicate doc_probe declaration
18856 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18858 commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
18859 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18860 Date: Tue Sep 9 00:59:40 2008 +0200
18862 onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
18864 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18866 commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
18867 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18868 Date: Tue Sep 9 00:59:39 2008 +0200
18870 rs5c372: fix rtc_set prototype
18872 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18874 commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
18875 Author: Sergei Poselenov <sposelenov@emcraft.com>
18876 Date: Thu Aug 14 14:08:28 2008 +0200
18878 ARM: fix warning: target CPU does not support interworking
18880 This patch fixes warnings like this:
18882 start.S:0: warning: target CPU does not support interworking
18884 which come from some ARM cross compilers and are caused by hard-coded
18885 (with "--with-cpu=arm9" configuration option) ARM targets (which
18886 support ARM Thumb instructions), while the ARM target selected from
18887 the command line (with "-march=armv4") doesn't support Thumb
18890 This warning is issued by the compiler regardless of the real use of
18891 the Thumb instructions in code.
18893 To fix this problem, we use options according to compiler version
18896 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18897 Signed-off-by: Wolfgang Denk <wd@denx.de>
18899 commit 4265c35fbcb248e58179007621d61d32d0b3b82a
18900 Author: Sergei Poselenov <sposelenov@emcraft.com>
18901 Date: Thu Aug 14 14:08:28 2008 +0200
18903 ARM: Use do_div() instead of division for "long long".
18905 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18906 Signed-off-by: Wolfgang Denk <wd@denx.de>
18908 commit 8febd13c69cb68652577d1a9fcbde954bf784155
18909 Author: Timur Tabi <timur@freescale.com>
18910 Date: Fri Jul 18 16:52:23 2008 +0200
18912 Update Freescale 85xx boards to sys_eeprom.c
18914 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
18915 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
18916 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
18917 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
18919 Signed-off-by: Timur Tabi <timur@freescale.com>
18921 commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
18922 Author: Wolfgang Denk <wd@denx.de>
18923 Date: Mon Sep 8 23:26:22 2008 +0200
18925 lib_arm/bootm.c: fix compile warnings
18927 bootm.c:128: warning: label 'error' defined but not used
18928 bootm.c:65: warning: unused variable 'ret'
18930 Signed-off-by: Wolfgang Denk <wd@denx.de>
18932 commit 2e3c867d0a63c563a51e65b776973b008f16cec5
18933 Author: Wolfgang Denk <wd@denx.de>
18934 Date: Mon Sep 8 22:46:42 2008 +0200
18936 ml507: fix out of tree build problem
18938 Signed-off-by: Wolfgang Denk <wd@denx.de>
18940 commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
18941 Author: Wolfgang Denk <wd@denx.de>
18942 Date: Mon Sep 8 22:10:28 2008 +0200
18944 common/cmd_bootm.c: fix printf() format warnings
18946 Signed-off-by: Wolfgang Denk <wd@denx.de>
18948 commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
18949 Author: Wolfgang Denk <wd@denx.de>
18950 Date: Mon Sep 8 22:37:45 2008 +0200
18952 BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
18954 missing doc_probe() prototype.
18956 Signed-off-by: Wolfgang Denk <wd@denx.de>
18958 commit 2c5e3cc4994897d364b148942ff23e47783198f6
18959 Author: Wolfgang Denk <wd@denx.de>
18960 Date: Mon Sep 8 21:28:14 2008 +0200
18962 mk48t59: fix compile problem introduced by commit d1e23194
18964 Signed-off-by: Wolfgang Denk <wd@denx.de>
18966 commit 5ff889349d2ace13f10c9335e09365fcec8247cc
18967 Author: Stefan Roese <sr@denx.de>
18968 Date: Mon Sep 8 14:11:12 2008 +0200
18970 ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
18972 This patch moves some 4xx specific prototypes out of include common.h
18973 to a ppc4xx specific header.
18975 Signed-off-by: Stefan Roese <sr@denx.de>
18977 commit ac53ee8318678190bf3c68da477a84a657d86fb0
18978 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18979 Date: Fri Sep 5 15:34:04 2008 +0200
18981 ppc4xx: Update CPCI405(AB) configuration
18983 This patch add FDT support and command line editing capabilities
18984 for CPCI405 and CPCI405AB boards.
18986 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18987 Signed-off-by: Stefan Roese <sr@denx.de>
18989 commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
18990 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18991 Date: Fri Sep 5 15:34:03 2008 +0200
18993 ppc4xx: Cleanup CPCI405 linker script
18995 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18996 Signed-off-by: Stefan Roese <sr@denx.de>
18998 commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
18999 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19000 Date: Fri Sep 5 15:34:02 2008 +0200
19002 ppc4xx: Update CPCI405 variants handling
19004 This patch replaces the BOARD_REVISION variable in include/config.mk
19005 by a using a temporary include file in the platform directory.
19007 The former way does not work anymore and the latter is also used by
19010 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19011 Signed-off-by: Stefan Roese <sr@denx.de>
19013 commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
19014 Author: Stefan Roese <sr@denx.de>
19015 Date: Mon Sep 8 10:01:48 2008 +0200
19017 ppc4xx: Remove CONFIG_CS8952_PHY define
19019 Since this define is only used on one board that was never really in
19020 production, removing this compile time option doesn't hurt and makes
19021 the code more readable.
19023 Signed-off-by: Stefan Roese <sr@denx.de>
19025 commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
19026 Author: Stefan Roese <sr@denx.de>
19027 Date: Fri Sep 5 14:11:40 2008 +0200
19029 ppc4xx: Fix compilation warning for PIP405
19031 This patch fixes a compilation warning for the PIP405 board. It moves the
19032 #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
19033 occur anymore. I am a little unsure if this #ifdef is at the correct
19034 place now or if it could be removed completely. This needs to get
19035 tested on the PIP405 board.
19037 Signed-off-by: Stefan Roese <sr@denx.de>
19039 commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
19040 Author: Stefan Roese <sr@denx.de>
19041 Date: Fri Sep 5 14:09:09 2008 +0200
19043 ppc4xx: Fix compilation warning for canyonlands & glacier
19045 Signed-off-by: Stefan Roese <sr@denx.de>
19047 commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
19048 Author: Kumar Gala <galak@kernel.crashing.org>
19049 Date: Fri Sep 5 14:40:29 2008 -0500
19051 Fix compiler warning in mpc8xxx ddr code
19053 ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
19054 ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
19055 ctrl_regs.c:523: note: 'caslat' was declared here
19057 Add a warning in DDR1 case if cas_latency isn't a value we know about.
19059 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19060 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19062 commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
19063 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19064 Date: Mon Sep 1 23:06:23 2008 +0200
19066 rtc: allow rtc_set to return an error and use it in cmd_date
19068 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19070 commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
19071 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19072 Date: Mon Sep 1 01:16:33 2008 +0200
19074 ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
19076 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19078 commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
19079 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19080 Date: Sun Aug 31 05:37:04 2008 +0900
19082 config.mk: Move arch-specific condition to $(ARCH)_config.mk
19084 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19086 commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
19087 Author: Kumar Gala <galak@kernel.crashing.org>
19088 Date: Fri Aug 29 19:08:29 2008 -0500
19090 Prevent crash if random/invalid ramdisks are passed to bootm
19092 Adds returning an error from the ramdisk detection code if
19093 its not a real ramdisk (invalid). There is no reason we can't
19094 just return back to the console if we detect an invalid
19095 ramdisk or CRC error.
19097 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19099 commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
19100 Author: Anatolij Gustschin <agust@denx.de>
19101 Date: Fri Aug 29 21:04:45 2008 +0200
19103 Prevent crash if random DTB address is passed to bootm
19105 This patch adds bootm_start() return value check. If
19106 error status is returned, we do not proceed further to
19107 prevent board reset or crash as we still can recover
19110 Signed-off-by: Anatolij Gustschin <agust@denx.de>
19112 commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
19113 Author: Andrew Dyer <adyer@righthandtech.com>
19114 Date: Fri Aug 29 12:30:39 2008 -0500
19116 clean up some #if !defined() in drivers/video/cfb_console.c
19118 rearrange some #if !defined() / #else / #endif statements to remove
19119 the negative logic.
19121 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
19123 commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
19124 Author: Kyungmin Park <kmpark@infradead.org>
19125 Date: Fri Aug 29 09:02:20 2008 +0900
19127 apollon: use the last memory area for u-boot
19129 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
19131 commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
19132 Author: Heiko Schocher <hs@denx.de>
19133 Date: Thu Aug 28 13:50:42 2008 +0200
19135 TQM8272: move NAND part in seperate File
19137 I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
19138 because I have no longer access to the hardware.
19140 Signed-off-by: Heiko Schocher <hs@denx.de>
19142 commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
19143 Author: Heiko Schocher <hs@denx.de>
19144 Date: Thu Aug 28 13:48:36 2008 +0200
19146 TQM8272: Fix compiling error for the TQM8272 board.
19148 Fix compile problems caused by
19149 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
19151 Signed-off-by: Heiko Schocher <hs@denx.de>
19153 commit 1a7f8ccec981648ccd38fca2535490582eee08e6
19154 Author: Kyungmin Park <kmpark@infradead.org>
19155 Date: Wed Aug 27 14:45:20 2008 +0900
19157 Add JFFS2 command support on OneNAND
19159 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
19161 commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
19162 Author: Mark Jackson <mpfj@mimc.co.uk>
19163 Date: Mon Aug 25 19:21:30 2008 +0100
19165 Allow console input to be disabled
19167 Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
19169 When CONFIG_DISABLE_CONSOLE is defined, setting
19170 GD_FLG_DISABLE_CONSOLE disables all console input and output.
19172 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
19174 commit 2b22d608f370565c87f55928b524207031419c11
19175 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19176 Date: Wed Jul 30 12:39:29 2008 +0200
19178 loads: allow negative offsets
19180 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19182 commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
19183 Author: Yuri Tikhonov <yur@emcraft.com>
19184 Date: Thu Sep 4 11:19:05 2008 +0200
19186 USB EHCI: reset root hub
19188 Some of multi-function USB controllers (e.g. ISP1562) allow root hub
19189 resetting only via EHCI registers. So, this patch adds the
19190 corresponding kind of reset to OHCI's hc_reset() if the newly
19191 introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
19194 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19195 Acked-by: Markus Klotzbuecher <mk@denx.de>
19197 commit 5875d358f025c1b042d8a0f08384b756de7256c9
19198 Author: Yuri Tikhonov <yur@emcraft.com>
19199 Date: Fri Aug 15 15:42:09 2008 +0200
19201 RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
19203 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19205 commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
19206 Author: Stefan Roese <sr@denx.de>
19207 Date: Fri Sep 5 10:47:46 2008 +0200
19209 devices: Use list_add_tail() instead of list_add() to register a device
19211 This patch fixes a problem spotted on Glacier/Canyonlands (and most
19212 likely lots of other board ports), that no serial output was seen
19213 after console initialization in console_init_r(). This is because the
19214 last added console device was used instead of the first added.
19216 This patch fixes this problem by using list_add_tail() instead of
19217 list_add() to register a device. This way the first added console
19220 Signed-off-by: Stefan Roese <sr@denx.de>
19222 commit 78d78236896d62bb8ca7302af38d8f1493eb2651
19223 Author: Victor Gallardo <vgallardo@amcc.com>
19224 Date: Thu Sep 4 23:49:36 2008 -0700
19226 ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
19228 This patch adds GPCS, SGMII and M88E1112 PHY support
19229 for the AMCC PPC460GT/EX processors.
19231 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
19232 Signed-off-by: Stefan Roese <sr@denx.de>
19234 commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
19235 Author: Adam Graham <agraham@amcc.com>
19236 Date: Wed Sep 3 12:26:59 2008 -0700
19238 ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
19240 Signed-off-by: Adam Graham <agraham@amcc.com>
19241 Signed-off-by: Stefan Roese <sr@denx.de>
19243 commit 075d0b81e896e8735ae26372cd384f87cbd24e41
19244 Author: Adam Graham <agraham@amcc.com>
19245 Date: Wed Sep 3 12:26:28 2008 -0700
19247 ppc4xx: IBM Memory Controller DDR autocalibration routines
19249 Alternate SDRAM DDR autocalibration routine that can be generically used
19250 for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
19251 support of more DIMM/memory chip vendors and gets the DDR autocalibration
19252 values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
19254 Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
19255 "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
19256 of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
19257 lot longer to run than Method_B. Method_B executes in the same amount of time
19258 as the currently existing DDR autocalibration routine, i.e. 1 second or so.
19259 Normally Method_B is used and it is set as the default method.
19261 The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
19262 Controller registers.[bit-field]:
19263 1) SDRAM0_RQDC.[RQFD]
19264 2) SDRAM0_RFDC.[RFFD]
19266 This alternate PPC4xx DDR autocalibration code calibrates the following
19267 IBM SDRAM Controller registers.[bit-field]:
19269 1) SDRAM0_WRDTR.[WDTR]
19270 2) SDRAM0_CLKTR.[CKTR]
19271 3) SDRAM0_RQDC.[RQFD]
19272 4) SDRAM0_RFDC.[RFFD]
19274 and will also use the calibrated settings of the above four registers that
19275 produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
19276 register.[bit-field].
19278 Signed-off-by: Adam Graham <agraham@amcc.com>
19279 Signed-off-by: Stefan Roese <sr@denx.de>
19281 commit e07f4a8033b6270b8103049adb6456f660ff4a89
19282 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19283 Date: Mon Sep 1 13:09:39 2008 -0400
19285 ppc44x: Unification of virtex5 pp440 boards
19287 This patch provides an unificated way of handling xilinx v5 ppc440 boards.
19289 It unificates 3 different things:
19292 A new board called ppc440-generic has been created. This board includes
19293 a generic tlb initialization (Maps the whole memory into virtual) and
19294 defines board_pre_init, checkboard, initdram and get_sys_info weakly,
19295 so, they can be replaced by specific functions.
19297 If a new board needs to redefine any of the previous functions
19298 (specific initialization) it can create a new directory with the
19299 specific initializations needed. (see the example ml507 board).
19301 2) Configuration file
19302 Common configurations are located under configs/xilinx-ppc440.h, this
19303 header file interpretes the xparameters file generated by EDK and
19304 configurates u-boot in correspondence. Example: if there is a Temac,
19305 allows CMD_CONFIG_NET
19306 Specific configuration are located under specific configuration file.
19307 (see the example ml507 board)
19310 Some work has been done in order to not duplicate work in the Main
19311 Makefile. Please see the attached code.
19313 In order to support new boards they can be implemented in the next way:
19315 a) Simple Generic Board (90% of the time)
19316 Using EDK generates a new xparameters.h file, replace
19317 ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
19320 b) Simple Boards with special u-boot parameters (9 % of the time)
19321 Create a new file under configs for it (use ml507.h as example) and
19322 change your paramaters. Create a new Makefile paragraph and compile
19324 c) Complex boards (1% of the time)
19325 Create a new folder for the board, like the ml507
19327 Finally, it adds support for the Avnet FX30T Evaluation board, following
19328 the new generic structure:
19330 Cheap board by Avnet for evaluating the Virtex5 FX technology.
19332 This patch adds support for:
19337 Prior using U-boot in this board, read carefully the ERRATA by Avnet
19338 to solve some memory initialization issues.
19340 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
19341 Signed-off-by: Stefan Roese <sr@denx.de>
19343 commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
19344 Author: Nick Spence <nick.spence@freescale.com>
19345 Date: Tue Sep 2 15:21:16 2008 -0500
19347 mpc83xx: fix mpc8313 in-tree building with NAND
19349 and add mpc8313 NAND build to MAKEALL
19351 Signed-off-by: Nick Spence <nick.spence@freescale.com>
19352 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19354 commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
19355 Author: Nick Spence <nick.spence@freescale.com>
19356 Date: Thu Aug 28 14:09:25 2008 -0700
19358 mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
19360 Cleans up some latent issues with the data cache control so that
19361 dcache_enable() and dcache_disable() will work reliably (after
19362 unlock_ram_in_cache() has been called)
19364 Signed-off-by: Nick Spence <nick.spence@freescale.com>
19365 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19367 commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
19368 Author: Nick Spence <nick.spence@freescale.com>
19369 Date: Thu Aug 28 14:09:19 2008 -0700
19371 mpc83xx: Store and display Arbiter Event Register values
19373 Record the Arbiter Event Register values and optionally display them.
19375 The Arbiter Event Register can record the type and effective address of
19376 an arbiter error, even through an HRESET. This patch stores the values in
19377 the global data structure.
19379 Display of the Arbiter Event registers immediately after the RSR value
19380 can be enabled with defines. The Arbiter values will only be displayed
19381 if an arbiter event has occured since the last Power On Reset, and either
19382 of the following defines exist:
19383 #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
19384 and type register values
19385 #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
19386 event register values
19388 Address Only transactions are one of the trapped events that can register
19389 as an arbiter event. They occur with some cache manipulation instructions
19390 if the HID0_ABE (Address Broadcast Enable) is set and the memory region
19391 has the MEMORY_COHERENCE WIMG bit set. Setting:
19392 #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
19393 only events, so that it can still capture
19394 other real problems.
19396 Signed-off-by: Nick Spence <nick.spence@freescale.com>
19397 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19399 commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
19400 Author: Nick Spence <nick.spence@freescale.com>
19401 Date: Thu Aug 28 14:09:11 2008 -0700
19403 mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
19405 This is needed in unlock_ram_in_cache() because it is called from C and
19406 will corrupt the small data area anchor that is kept in R2.
19408 lock_ram_in_cache() is modified similarly as good coding practice, but
19409 is not called from C.
19411 Signed-off-by: Nick Spence <nick.spence@freescale.com>
19412 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19414 commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
19415 Author: Nick Spence <nick.spence@freescale.com>
19416 Date: Fri Aug 22 23:52:50 2008 -0700
19418 MPC83XX: Fix GPIO configuration - set gpio level before direction
19420 Set DAT value before DIR values to avoid creating glitches on the
19423 Set gpio level register before direction register to inhibit
19424 glitches on high level output pins.
19426 Dir and data gets cleared at powerup, so high level output lines see
19427 a short low pulse between setting the direction and level registers.
19429 Issue was seen on a new board with the nReset line of the NOR flash
19430 connected to a GPIO. Setting the direction register puts the NOR flash
19431 in reset so the next instruction to set the level cannot get executed.
19433 Signed-off-by: Nick Spence <nick.spence@freescale.com>
19434 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
19435 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19437 commit 7007c5975ee900ad70983b0681d3251e221f8321
19438 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19439 Date: Tue Sep 2 02:58:32 2008 +0200
19441 doc/qemu_mips: add doc howto debug u-boot with gdb
19443 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19445 commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
19446 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19447 Date: Wed Sep 3 17:15:45 2008 +0200
19449 ppx4xx: Fix broken DASA_SIM board
19451 This patch adds initdram() to DASA_SIM boards that has been
19452 removed accidentally by a previous commit.
19454 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19455 Signed-off-by: Stefan Roese <sr@denx.de>
19457 commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
19458 Author: Stefan Roese <sr@denx.de>
19459 Date: Mon Sep 1 08:35:37 2008 +0200
19461 ppc4xx: Remove reference to common/lists.o from some esd linker scripts
19463 This patch removes some direct references to common/lists.o from some
19464 esd linker scripts. This is necessary because the lists source was moved
19465 and is not in the "common" directory anymore.
19467 Signed-off-by: Stefan Roese <sr@denx.de>
19469 commit 97b0734d65f8a0b03df0a335a2addc759da56107
19470 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19471 Date: Tue Sep 2 16:33:05 2008 +0200
19473 ppc4xx: Remove obsolete or unused functions from some esd boards
19475 This patch removes initdram() and testdram() from most esd 405 platforms.
19476 Some boards also have an empty dummy implementation of
19477 misc_init_f(). This is also removed.
19479 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19480 Signed-off-by: Stefan Roese <sr@denx.de>
19482 commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
19483 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19484 Date: Tue Sep 2 15:07:54 2008 +0200
19486 ppc4xx: Update VOM405 board configuration
19489 - add command line editing
19492 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19493 Signed-off-by: Stefan Roese <sr@denx.de>
19495 commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
19496 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19497 Date: Tue Sep 2 15:07:53 2008 +0200
19499 ppc4xx: Remove obsolete initdram() function from VOM405 board
19501 This patch removed the obsolete initdram() function from
19502 VOM405 platform file.
19504 Some minor cleanup.
19506 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19507 Signed-off-by: Stefan Roese <sr@denx.de>
19509 commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
19510 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19511 Date: Tue Sep 2 15:07:52 2008 +0200
19513 ppc4xx: Cleanup VOM405 linker script
19515 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19516 Signed-off-by: Stefan Roese <sr@denx.de>
19518 commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
19519 Author: Matthias Fuchs <mf@esd.eu>
19520 Date: Tue Sep 2 15:07:51 2008 +0200
19522 ppc4xx: Add fdt support for VOM405 boards
19524 Signed-off-by: Matthias Fuchs <mf@esd.eu>
19525 Signed-off-by: Stefan Roese <sr@denx.de>
19527 commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
19528 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19529 Date: Tue Sep 2 11:36:14 2008 +0200
19531 ppc4xx: Coding style cleanup
19533 Wrap long lines etc.
19535 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19536 Signed-off-by: Stefan Roese <sr@denx.de>
19538 commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
19539 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19540 Date: Tue Sep 2 11:35:56 2008 +0200
19542 ppc4xx: Enable USB on PLU405 boards
19544 This patch enables the PCI-OHCI controller on PLU405 board.
19546 Also the default CPU frequency is updated to 266 MHz and
19547 command line editing is enabled.
19549 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19550 Signed-off-by: Stefan Roese <sr@denx.de>
19552 commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
19553 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19554 Date: Tue Sep 2 11:35:35 2008 +0200
19556 ppc4xx: Cleanup PLU405 platform file
19559 - wraps some long lines
19560 - removes unused/obsolete functions: misc_init_f() and initdram()
19562 Signed-off-by: Matthias Fuchs <mf@esd.eu>
19563 Signed-off-by: Stefan Roese <sr@denx.de>
19565 commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
19566 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19567 Date: Tue Sep 2 11:35:04 2008 +0200
19569 ppc4xx: Cleanup PLU405 linker script
19571 Signed-off-by: Matthias Fuchs <mf@esd.eu>
19572 Signed-off-by: Stefan Roese <sr@denx.de>
19574 commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
19575 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19576 Date: Tue Sep 2 11:34:36 2008 +0200
19578 ppc4xx: Add fdt support for PLU405 boards
19580 Signed-off-by: Matthias Fuchs <mf@esd.eu>
19581 Signed-off-by: Stefan Roese <sr@denx.de>
19583 commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
19584 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19585 Date: Tue Sep 2 11:34:08 2008 +0200
19587 ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
19589 Signed-off-by: Matthias Fuchs <mf@esd.eu>
19590 Signed-off-by: Stefan Roese <sr@denx.de>
19592 commit be1b0d2777e179191a57b138b660547a17e55aad
19593 Author: Jochen Friedrich <jochen@scram.de>
19594 Date: Tue Sep 2 11:24:59 2008 +0200
19596 Don't tftp to unknown flash
19598 If a board has a variable number of flash banks, there are empty entries
19599 in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
19600 "Outside available Flash". This patch skips flash banks with unknown
19603 Signed-off-by: Jochen Friedrich <jochen@scram.de>
19604 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19606 commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
19607 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19608 Date: Thu Aug 28 13:40:44 2008 +0900
19610 net: smc911x: Add pkt_data_pull and pkt_data_push function
19612 The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
19613 Byte-swapping is necessary, and so poor performance is inevitable.
19614 This problem cannot evade by the swap function of CHIP, this can
19615 evade by software Byte-swapping.
19616 And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
19617 functions necessary to solve this problem.
19619 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19620 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19622 commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
19623 Author: Ben Warren <biggerbadderben@gmail.com>
19624 Date: Sun Aug 31 20:37:00 2008 -0700
19626 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
19657 Removed initialization of the driver from net/eth.c
19658 Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
19660 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19662 commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
19663 Author: Ben Warren <biggerbadderben@gmail.com>
19664 Date: Sun Aug 31 10:45:44 2008 -0700
19666 Moved initialization of TULIP Ethernet controller to board_eth_init()
19681 Removed initialization of the driver from net/eth.c
19683 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19685 commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
19686 Author: Ben Warren <biggerbadderben@gmail.com>
19687 Date: Sun Aug 31 10:44:19 2008 -0700
19689 Moved initialization of E1000 Ethernet controller to board_eth_init()
19696 Removed initialization of the driver from net/eth.c
19698 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19700 commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
19701 Author: Ben Warren <biggerbadderben@gmail.com>
19702 Date: Sun Aug 31 10:40:51 2008 -0700
19704 Moved initialization of plb2800 Ethernet driver to board_eth_init
19709 Removed initialization of controller from net/eth.c
19711 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19713 commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
19714 Author: Ben Warren <biggerbadderben@gmail.com>
19715 Date: Sun Aug 31 10:39:12 2008 -0700
19717 Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
19719 Modified board_eth_init() functions of boards that have this FEC in addition
19720 to other Ethernet controllers.
19731 Removed initialization of controller from net/eth.c
19733 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19735 commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
19736 Author: Ben Warren <biggerbadderben@gmail.com>
19737 Date: Sun Aug 31 10:36:38 2008 -0700
19739 Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
19741 Added a cpu_eth_init() function to MPC512x CPU directory and
19742 removed code from net/eth.c
19744 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19746 commit 8218bd2aa68820b878a8413493ae17fd8d21f944
19747 Author: Ben Warren <biggerbadderben@gmail.com>
19748 Date: Sun Aug 31 10:16:59 2008 -0700
19750 Moved initialization of IncaIP Ethernet controller to board_eth_init
19755 Removed initialization of the driver from net/eth.c
19757 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19759 commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
19760 Author: Ben Warren <biggerbadderben@gmail.com>
19761 Date: Sun Aug 31 10:15:26 2008 -0700
19763 Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
19768 Removed initialization of the driver from net/eth.c
19770 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19772 commit 6aca145e067efe75398e9fac97822bd3700de0b2
19773 Author: Ben Warren <biggerbadderben@gmail.com>
19774 Date: Sun Aug 31 10:13:34 2008 -0700
19776 Moved initialization of GT6426x Ethernet controller to board_eth_init()
19783 Removed initialization of the driver from net/eth.c
19785 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19787 commit e3090534d62045dcb73f5392bacc64a4e8e443dc
19788 Author: Ben Warren <biggerbadderben@gmail.com>
19789 Date: Sun Aug 31 10:08:43 2008 -0700
19791 Moved initialization of PCNET Ethernet controller to board_eth_init()
19797 Removed initialization of the driver from net/eth.c
19799 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19801 commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
19802 Author: Ben Warren <biggerbadderben@gmail.com>
19803 Date: Sun Aug 31 10:07:16 2008 -0700
19805 Moved initialization of NATSEMI Ethernet controller to board_eth_init()
19810 Removed initialization of the driver from net/eth.c
19812 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19814 commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
19815 Author: Ben Warren <biggerbadderben@gmail.com>
19816 Date: Sun Aug 31 10:03:22 2008 -0700
19818 Moved initialization of NS8382X Ethernet controller to board_eth_init()
19832 Removed initialization of the driver from net/eth.c
19834 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19836 commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
19837 Author: Ben Warren <biggerbadderben@gmail.com>
19838 Date: Sun Aug 31 09:59:33 2008 -0700
19840 Moved initialization of TSI108 Ethernet controller to board_eth_init()
19845 Removed initialization of the driver from net/eth.c
19847 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19849 commit 0b252f50ae218ae15bfb63af44227972686ebc56
19850 Author: Ben Warren <biggerbadderben@gmail.com>
19851 Date: Sun Aug 31 21:41:08 2008 -0700
19853 Moved initialization of RTL8139 Ethernet controller to board_eth_init()
19862 Removed initialization of the driver from net/eth.c
19864 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19866 commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
19867 Author: Ben Warren <biggerbadderben@gmail.com>
19868 Date: Sun Aug 31 09:49:42 2008 -0700
19870 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
19876 Removed initialization of the driver from net/eth.c
19878 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19880 commit 3ae071e44256144d6c1e3febb65f6c56bd433769
19881 Author: Ben Warren <biggerbadderben@gmail.com>
19882 Date: Tue Aug 12 22:11:53 2008 -0700
19884 Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
19886 Removed at91sam9_eth_initialize() from net/eth.c
19888 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19890 commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
19891 Author: Ben Warren <biggerbadderben@gmail.com>
19892 Date: Sun Aug 31 22:22:04 2008 -0700
19894 Introduce netdev.h header file and remove externs
19896 This addresses all drivers whose initializers have already
19897 been moved to board_eth_init()/cpu_eth_init().
19899 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19901 commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
19902 Author: Andy Fleming <afleming@freescale.com>
19903 Date: Sun Aug 31 16:33:30 2008 -0500
19905 Add pixis_set_sgmii command
19907 The 8544DS and 8572DS platforms support an optional SGMII riser card to
19908 expose ethernet over an SGMII interface. Once the card is in, it is also
19909 necessary to configure the board such that it uses the card, rather than
19910 the on-board ethernet ports. This can either be done by flipping dip switches
19911 on the motherboard, or by modifying registers in the pixis. Either way
19914 This adds a command to allow users to choose which ports are routed through
19915 the SGMII card, and which through the onboard ports. It also allows users
19916 to revert to the current switch settings.
19918 This code does not work on the 8572, as the PIXIS is different.
19920 Signed-off-by: Andy Fleming <afleming@freescale.com>
19921 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19923 commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
19924 Author: Andy Fleming <afleming@freescale.com>
19925 Date: Sun Aug 31 16:33:29 2008 -0500
19927 Add SGMII support for the 8544 DS
19929 The 8544 DS has an optional SGMII Riser card, which uses different PHY
19930 addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
19933 Signed-off-by: Andy Fleming <afleming@freescale.com>
19934 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19936 commit 652f7c2eef76a1340928bd660845441e932d86a2
19937 Author: Andy Fleming <afleming@freescale.com>
19938 Date: Sun Aug 31 16:33:28 2008 -0500
19940 Add support for Freescale SGMII Riser Card
19942 The 8544DS and 8572DS systems have an optional SGMII riser card which
19943 exposes new ethernet ports which are connected to the eTSECs via an
19944 SGMII interface. The SGMII PHYs for this board are offset from the standard
19945 PHY addresses, so this code modifies the passed in tsec_info structure to
19946 use the SGMII PHYs on the card, instead.
19948 Signed-off-by: Andy Fleming <afleming@freescale.com>
19949 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19951 commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
19952 Author: Andy Fleming <afleming@freescale.com>
19953 Date: Sun Aug 31 16:33:27 2008 -0500
19955 Add SGMII support to the tsec
19957 Adds support for configuring the TBI to talk properly with the SerDes.
19959 Signed-off-by: Andy Fleming <afleming@freescale.com>
19960 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19962 commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
19963 Author: Andy Fleming <afleming@freescale.com>
19964 Date: Sun Aug 31 16:33:26 2008 -0500
19966 Pass in tsec_info struct through tsec_initialize
19968 The tsec driver contains a hard-coded array of configuration information
19969 for the tsec ethernet controllers. We create a default function that works
19970 for most tsecs, and allow that to be overridden by board code. It creates
19971 an array of tsec_info structures, which are then parsed by the corresponding
19972 driver instance to determine configuration. Also, add regs, miiregs, and
19973 devname fields to the tsec_info structure, so that we don't need the kludgy
19976 Signed-off-by: Andy Fleming <afleming@freescale.com>
19977 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19979 commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
19980 Author: Andy Fleming <afleming@freescale.com>
19981 Date: Sun Aug 31 16:33:25 2008 -0500
19983 tsec: Move tsec.h to include/
19985 This is to prepare the way for board code passing in the tsec_info structure
19987 Signed-off-by: Andy Fleming <afleming@freescale.com>
19988 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19990 commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
19991 Author: Sergei Poselenov <sposelenov@emcraft.com>
19992 Date: Fri Jun 6 15:52:44 2008 +0200
19994 PHY: Add support for the M88E1121R Marvell chip.
19996 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19997 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
19998 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20000 commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
20001 Author: Wolfgang Denk <wd@denx.de>
20002 Date: Tue Sep 2 21:17:36 2008 +0200
20004 fw_env.c: fix build problems with MTD_VERSION=old
20006 (as needed to support old 2.4 Linux kernel based releases)
20008 Signed-off-by: Wolfgang Denk <wd@denx.de>
20010 commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
20011 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20012 Date: Mon Sep 1 17:11:26 2008 +0200
20014 device: make device_register() clone the device
20016 This is expected by the callers, but this fact was hidden well within
20017 the old list implementation.
20019 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20021 commit baf449fc5ff96f071bb0e3789fd3265f6d4fd9a0
20022 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20023 Date: Mon Sep 1 14:00:07 2008 +0200
20025 avr32: Add support for "GPIO" port mux
20027 The "GPIO" port mux is used on AVR32 UC3 parts as well as AT32AP7200 and
20028 all later AVR32 chips. This patch adds a driver for it, implementing the
20029 same API as the existing portmux-pio driver but with more functionality.
20031 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20033 commit d92852579546c46bdaac978e0b6767a6645b69e0
20034 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20035 Date: Fri Aug 15 15:02:29 2008 +0200
20037 atstk1000: Convert to new-style makefile
20039 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20041 commit 25e6854d42c11046a468576179b5494f850311b2
20042 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20043 Date: Sun Aug 31 18:46:35 2008 +0200
20045 avr32: use board_early_init_r instead of board_init_info
20047 Replace the avr32-specific board_init_info hook by the standard
20048 board_early_init_r hook and make it optional.
20050 board_early_init_r() runs somewhat earlier than board_init_info used to
20051 do, but this isn't a problem for any of the in-tree boards.
20053 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20055 commit 36d375faf5cff98e8dca32aabbbb1ec6036437dd
20056 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20057 Date: Sun Aug 31 18:24:24 2008 +0200
20059 avr32: Use board_postclk_init instead of gclk_init
20061 Replace the avr32-specific gclk_init() board hook with the standard
20062 board_postclk_init() hook which is supposed to run at the same point
20063 during initialization.
20065 Provide a dummy weak alias for boards not implementing this hook. The
20067 - 2 bytes for the dummy function (retal 0)
20068 - 2 bytes for each unnecessary function call (short rcall)
20070 which is a pretty small price to pay for avoiding lots of #ifdef
20071 clutter. In this particular case, all boards probably end up slightly
20072 smaller because we avoid the conditional checking if the gclk_init
20075 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20077 commit abdde2b1d570b1ee77606bf783444fcddf7f0965
20078 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20079 Date: Sun Aug 31 18:07:35 2008 +0200
20081 hammerhead: Use gclk helper functions
20083 Use the new gclk helper functions to set up the PHY clock instead of
20084 accessing the PM registers directly.
20086 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20088 commit 98090cd75cdb40b2ab94c806c338540a5716748b
20089 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20090 Date: Sun Aug 31 18:05:32 2008 +0200
20092 avr32: Add gclk helper functions
20094 Add two helper functions for configuring and enabling generic clocks:
20095 - gclk_enable_output: Enables output on a GCLKx pin
20096 - gclk_set_rate: Configures a gclk to run at a specific rate
20098 This should eliminate any reason to go mucking about with PM registers
20101 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20103 commit ab0df36fc7db9dda0b786b909f653e279dfeb9cf
20104 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20105 Date: Fri Aug 29 21:09:49 2008 +0200
20107 avr32: refactor the portmux/gpio code
20109 - Separate the portmux configuration functionality from the GPIO pin
20111 - Separate the controller-specific code from the chip-specific code.
20112 - Allow "ganged" port configuration (multiple pins at once).
20113 - Add more flexibility to the "canned" peripheral select functions:
20114 - Allow using more than 23 address bits, more chip selects, as
20115 well as NAND- and CF-specific pins.
20116 - Make the MACB SPEED pin optional, and choose between MII/RMII
20117 using a parameter instead of an #ifdef.
20118 - Make it possible to use other MMC slots than slot 0, and support
20119 different MMC/SDCard data bus widths.
20120 - Use more reasonable pull-up defaults; floating pins may consume a
20122 - Get rid of some custom portmux code from the mimc200 board code. The
20123 old gpio/portmux API couldn't really handle its requirements, but
20125 - Add documentation.
20127 The end result is slightly smaller code for all boards. Which isn't
20128 really the point, but at least it isn't any larger.
20130 This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if
20131 the board maintainers could help me test this on their boards. In
20132 particular, the mimc200 port has lost a lot of code, so I'm hoping Mark
20135 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20136 Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
20137 Cc: Mark Jackson <mpfj@mimc.co.uk>
20138 Cc: Alex Raimondi <alex.raimondi@miromico.ch>
20139 Cc: Julien May <julien.may@miromico.ch>
20142 * Enable pullup on NWAIT
20143 * Add missing include to portmux-pio.h
20144 * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
20146 commit 4c24e8288c601cb773ab02528b48a8577970e867
20147 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20148 Date: Sat Aug 30 17:28:36 2008 +0200
20150 avr32: data_bits should reflect the actual number of data bits
20152 Make the data_bits enum in struct sdram_config reflect the actual number
20153 of data bits on the bus, i.e. 16 or 32. Having 0 mean 16 bits and 1 mean
20154 32 bits is just too confusing.
20156 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20158 commit 66b7bc5175325809718d8d49ef073bc1036ad71b
20159 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20160 Date: Fri Aug 29 17:48:18 2008 +0200
20162 avr32: Update README
20164 Remove some outdated and/or unnecessary information, and add updated
20165 information about the toolchain and buildroot.
20167 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
20169 commit c75e772a2f061a508bba28ded1b5bea91f0442b0
20170 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20171 Date: Sun Aug 31 23:28:15 2008 +0900
20173 sh: Remove CC line from board's Makefile
20175 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20177 commit 468eae0660de6fdfd9999944c536ecc4797bd944
20178 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20179 Date: Sun Aug 31 23:25:57 2008 +0900
20181 sh: Replaced "@./mkconfig" for @$(MKCONFIG)
20183 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20185 commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
20186 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20187 Date: Thu Aug 28 14:50:52 2008 +0900
20189 sh: Add support sh2 to MAKEALL
20191 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20192 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20194 commit 6f3d8bb5faa12dbf3031382286784c978df038ee
20195 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20196 Date: Thu Aug 28 14:52:23 2008 +0900
20198 sh: Fix compile error rsk7203 board
20200 This boards used old type preprocessor.
20201 This patch fix compile error.
20203 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20204 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20206 commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
20207 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20208 Date: Thu Aug 28 14:53:31 2008 +0900
20210 sh: Fix compile error sh7785lcr board
20212 This boards used old type preprocessor.
20213 This patch fix compile error.
20215 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20216 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20218 commit 6f0da4972e48f99d37bc522814940a6022cd3084
20219 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20220 Date: Fri Aug 22 17:39:09 2008 +0900
20222 sh: Renesas Solutions AP325RXA board support
20224 AP325RXA is SH7723's reference board.
20225 This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
20226 In this patch, support SCIF, NOR Flash, and Ethernet.
20228 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20229 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20231 commit ab09f433b50bb83b5e440c335bc3839ee069e534
20232 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20233 Date: Fri Aug 22 17:48:51 2008 +0900
20235 sh: add support Renesas SH7723
20237 Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
20238 This patch supports CPU register's header file and SCIF serial driver.
20240 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20241 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20243 commit c655fad06ba3fb042dbc667724a40e1a9a091248
20244 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20245 Date: Sun Aug 31 23:02:04 2008 +0900
20247 sh: Renesas RSK+ 7203 board support
20249 This adds initial support for the RTE RSK+ SH7203 board.
20251 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20252 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20254 commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
20255 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20256 Date: Thu Jul 3 23:11:02 2008 +0900
20258 sh: Add support Renesas SH7203 processor
20260 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20261 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20263 commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
20264 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20265 Date: Sun Aug 31 22:48:33 2008 +0900
20267 sh: Add support SH2/SH2A which is CPU of Renesas Technology
20269 Add support SH2/SH2A basic function.
20271 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
20272 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20274 commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
20275 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20276 Date: Sun Aug 31 22:45:08 2008 +0900
20278 sh: Renesas R0P7785LC0011RL board support
20280 This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
20281 Graphic, Ethernet, USB, SD, RTC, and I2C controller.
20283 This patch supports the following functions:
20284 - 128MB DDR2-SDRAM (29-bit address mode only)
20289 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
20290 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20292 commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
20293 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
20294 Date: Thu Jul 10 19:32:53 2008 +0900
20296 sh: add support for SH7785
20298 Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
20299 This patch supports CPU register's header file.
20301 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
20302 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
20304 commit d6e04258be8f2408845468d3cf722a4cf0433445
20305 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20306 Date: Sun Aug 31 04:45:42 2008 +0200
20308 davinci: fix remaining dm644x_eth
20310 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20312 commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
20313 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20314 Date: Sun Aug 31 04:24:56 2008 +0200
20316 fs: Move conditional compilation to Makefile
20318 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20320 commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
20321 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20322 Date: Sun Aug 31 04:24:55 2008 +0200
20324 devices: merge to list_head
20326 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20328 commit ef0255fc75f28655f9681422079287d68a14dbaa
20329 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20330 Date: Sun Aug 31 04:24:51 2008 +0200
20334 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20336 commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
20337 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20338 Date: Sun Aug 31 00:39:48 2008 +0200
20340 smdk6400: add gitignore
20342 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20344 commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
20345 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20346 Date: Sun Aug 31 00:39:48 2008 +0200
20348 smdk6400: Use CONFIG_FLASH_CFI_DRIVER
20350 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20352 commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
20353 Author: Guennadi Liakhovetski <lg@denx.de>
20354 Date: Sun Aug 31 00:39:47 2008 +0200
20356 smdk6400: remove redundant bootargs definition
20358 Double bootargs setting leads to a duplicated environmant entry.
20360 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20362 commit 11edcfe260f20dcea79284a3e95270989d433854
20363 Author: Guennadi Liakhovetski <lg@denx.de>
20364 Date: Sun Aug 31 00:39:47 2008 +0200
20366 ARM: Add support for S3C6400 based SMDK6400 board
20368 SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
20369 driver for it too. The board can also boot from the NOR flash, but due to
20370 hardware limitations it can only address 64KiB on it, which is not enough
20371 for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
20373 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20375 commit e0056b341069796eaea11eae0fc8eb93a3dceaac
20376 Author: Guennadi Liakhovetski <lg@denx.de>
20377 Date: Sun Aug 31 00:39:47 2008 +0200
20379 NAND: add NAND driver for S3C64XX
20381 Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
20383 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20385 commit 3fe7b589f9c7463df39056f8872006a67f56a91c
20386 Author: Guennadi Liakhovetski <lg@denx.de>
20387 Date: Sun Aug 31 00:39:47 2008 +0200
20389 S3C64XX: remove broken HWFLOW support from the serial driver
20391 As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
20392 broken and currently unused. Remove it.
20394 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20396 commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
20397 Author: Guennadi Liakhovetski <lg@denx.de>
20398 Date: Sun Aug 31 00:39:47 2008 +0200
20400 serial: add S3C64XX serial driver
20402 Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
20404 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20406 commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
20407 Author: Guennadi Liakhovetski <lg@denx.de>
20408 Date: Sun Aug 31 00:39:46 2008 +0200
20410 USB: Add support for OHCI controller on S3C6400
20412 Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
20413 try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
20414 it should work too and we could still profit from instruction cache.
20416 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20418 commit 9b07773f8883665b002500c190507e9fd99b7181
20419 Author: Guennadi Liakhovetski <lg@denx.de>
20420 Date: Sun Aug 31 00:39:46 2008 +0200
20422 ARM: Add arm1176 core with S3C6400 SoC
20424 Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
20426 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20428 commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
20429 Author: Sandeep Paulraj <s-paulraj@ti.com>
20430 Date: Sun Aug 31 00:39:46 2008 +0200
20432 ARM DaVinci: Changing function names for EMAC driver
20434 DM644x is just one of a series of DaVinci chips that use the EMAC driver.
20435 By replacing all the function names that start with dm644x_* to davinci_*
20436 we make these function more portable. I have tested this change on my EVM.
20437 DM6467 is another DaVinci SOC which uses the EMAC driver and i will
20438 be sending patches that add DaVinci DM6467 support to the list soon.
20440 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
20442 commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
20443 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
20444 Date: Sat Aug 30 23:21:30 2008 +0200
20446 Integrator[AP/CP] - Remove unused file memsetup.S
20448 - memsetup.s is changed/merged to lowlevel_init.S
20449 memsetup.S has a global label memsetup that just returns back to caller
20450 - memsetup global label is changed/merged to lowlevel_init
20451 This label is not called from anywhere.
20453 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
20455 commit 89d51d022a63be1a851eda983c8cbce1a044f65f
20456 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20457 Date: Wed Aug 27 21:35:52 2008 +0200
20459 ARM DaVinci: Standardize names of directories/files
20461 ARM DaVinci: Standardize names of directories/files.
20463 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20464 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20466 commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
20467 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20468 Date: Fri Jul 11 15:10:13 2008 -0400
20470 ARM DaVinci: Move common functions to board/davinci/common
20472 ARM DaVinci: Move common functions to board/davinci/common.
20474 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20476 commit c2b4b2e4814f4ace9015fdb64132894327400bf0
20477 Author: Stefan Roese <sr@denx.de>
20478 Date: Fri Aug 29 11:56:49 2008 +0200
20480 ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
20482 This function is needed for the new NAND infrastructure. We only need
20483 a dummy implementation though for the NDFC.
20485 Signed-off-by: Stefan Roese <sr@denx.de>
20487 commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
20488 Author: Stefan Roese <sr@denx.de>
20489 Date: Fri Aug 29 12:06:27 2008 +0200
20491 ppc4xx: Increase image size for NAND boot target
20493 This is needed since now with HUSH enabled (amcc-common.h) the image
20494 read from NAND exceeds the previous limit.
20496 Signed-off-by: Stefan Roese <sr@denx.de>
20498 commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
20499 Author: Ben Warren <biggerbadderben@gmail.com>
20500 Date: Thu Aug 28 23:58:30 2008 -0700
20502 Move MPC512x_FEC driver to drivers/net
20504 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20506 commit 80b00af01b3c9154774de2936f05a051e92f6a03
20507 Author: Ben Warren <biggerbadderben@gmail.com>
20508 Date: Thu Aug 28 23:58:29 2008 -0700
20510 Move MPC5xxx_FEC driver to drivers/net
20512 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20514 commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
20515 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20516 Date: Fri Aug 29 21:53:57 2008 +0200
20518 cmd_terminal: remove no need ifdef
20520 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20522 commit 578118bdf122877ae769776be002255be447b4fa
20523 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20524 Date: Fri Aug 29 21:53:57 2008 +0200
20526 common/Makefile: order by functionality
20528 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20530 commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
20531 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20532 Date: Fri Aug 29 21:53:56 2008 +0200
20534 miiphyutil: Move conditional compilation to Makefile
20536 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20538 commit 81789c39db3f0f6b621df8c0ec66014d701f368e
20539 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20540 Date: Fri Aug 29 21:53:37 2008 +0200
20542 autoscript: Move conditional compilation to Makefile
20544 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20546 commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
20547 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20548 Date: Fri Aug 29 01:18:11 2008 +0200
20550 crc16: move to lib_generic
20552 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20554 commit 55195773eacefb22dd483a3c560ea30a14263ce1
20555 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20556 Date: Fri Aug 29 01:18:01 2008 +0200
20558 miiphybb: move to drivers/net/phy
20560 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20562 commit e8314035996a9118ac5948df2ff8a2f2161ed67a
20563 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20564 Date: Thu Aug 28 12:31:51 2008 +0200
20566 soft_spi: move to drivers/spi
20568 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20570 commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
20571 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20572 Date: Thu Aug 28 12:31:51 2008 +0200
20574 soft_i2c: move to drivers/i2c
20576 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20578 commit 717a222229fdb77703e9174d0eb08a4b41febf49
20579 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20580 Date: Thu Aug 28 12:31:48 2008 +0200
20582 gunzip: move to lib_generic
20584 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20586 commit 52aef8f9ba28b747973bf76741c23db658d5773c
20587 Author: Wolfgang Ocker <weo@reccoware.de>
20588 Date: Tue Aug 26 19:55:23 2008 +0200
20590 ppc4xx: NAND configuration
20592 Made NAND bank configuration setting a config variable.
20594 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
20595 Signed-off-by: Stefan Roese <sr@denx.de>
20597 commit 5bc542a593abc9e974fbd34704af85c37c366c60
20598 Author: Victor Gallardo <vgallardo@amcc.com>
20599 Date: Thu Aug 28 16:03:28 2008 -0700
20601 ppc4xx: fix UIC external_interrupt hang on UIC0
20603 This patch fixes a UIC external_interrupt hang if critical or non-critical
20604 interrupt is set at the same time as a normal interrupt is set on UIC0.
20606 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
20607 Signed-off-by: Stefan Roese <sr@denx.de>
20609 commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
20610 Author: Prodyut Hazarika <phazarika@amcc.com>
20611 Date: Wed Aug 27 16:39:00 2008 -0700
20613 ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
20615 Removed Magic numbers from Initialization preload registers
20616 Tested with Kilauea, Glacier, Canyonlands and Katmai boards
20617 About 5-7% improvement seen for LMBench memtests
20619 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
20620 Signed-off-by: Stefan Roese <sr@denx.de>
20622 commit 8a490422bed685c9491274ec997f62061d88620b
20623 Author: John Rigby <jrigby@freescale.com>
20624 Date: Thu Aug 28 13:17:07 2008 -0600
20626 ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
20628 MPC5121 rev 2 silicon has a new register for controlling how long
20629 CS is asserted after deassertion of ALE in multiplexed mode.
20631 The default is to assert CS together with ALE. The alternative
20632 is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
20634 The default is wrong for the NOR flash and CPLD on the ADS5121.
20636 This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
20637 it does so conditionally based on silicon rev 2.0 or greater.
20639 Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
20640 Signed-off-by: John Rigby <jrigby@freescale.com>
20642 commit 5d9a5efa4b332f442b54a755d49969123c3a8742
20643 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20644 Date: Tue Aug 19 00:56:46 2008 +0600
20646 Add I2C frequency dividers for ColdFire
20648 The existing I2C freqency dividers for FDR does not apply
20649 to ColdFire platforms; thus, a seperate table is added
20650 based on MCF5xxx Reference Manual
20652 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
20653 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20654 Acked-by: Tabi Timur <timur@freescale.com>
20656 commit eec567a67e00d1ed8d941e9098b7d421f4091abf
20657 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20658 Date: Tue Aug 19 03:01:19 2008 +0600
20660 ColdFire: I2C fix for multiple platforms
20662 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20664 commit d53cf6a9c7423cba668b867978648645f71c3090
20665 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20666 Date: Tue Aug 19 00:37:13 2008 +0600
20668 ColdFire: Add CONFIG_MII_INIT for M5272C3
20670 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20672 commit f78ced3028d4130b24a318943a70cf5584ab16f4
20673 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20674 Date: Tue Aug 19 00:26:25 2008 +0600
20676 ColdFire: Multiple fixes for MCF5445x platforms
20678 Add FEC pin set and mii reset in __mii_init(). Change
20679 legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
20680 change cfi_offset to 0, and change CFG_FLASH_CFI to
20681 CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
20682 M54455EVB env settings in configuration file.
20684 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20686 commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
20687 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20688 Date: Fri Aug 15 18:24:25 2008 +0000
20690 ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
20692 The user manuals recommend 7.
20694 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
20695 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20697 commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
20698 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20699 Date: Fri Aug 15 16:50:07 2008 +0000
20701 ColdFire: Raise uart baudrate to 115200 bps
20703 M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
20704 uart baudrate increase from 19200 to 115200 bps
20706 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20708 commit ab6ba842682552ccf071d0034da0a20633d1d1ac
20709 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20710 Date: Wed Aug 13 12:07:03 2008 +0000
20712 ColdFire: Fix board.c warning message
20714 Implicit declaration of nand_init() warning message
20716 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20718 commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
20719 Author: Kumar Gala <galak@kernel.crashing.org>
20720 Date: Wed Aug 27 01:10:34 2008 -0500
20722 FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
20724 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20726 commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
20727 Author: Heiko Schocher <hs@denx.de>
20728 Date: Thu Aug 21 20:44:49 2008 +0200
20730 mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
20732 Signed-off-by: Heiko Schocher <hs@denx.de>
20734 commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
20735 Author: Kumar Gala <galak@kernel.crashing.org>
20736 Date: Tue Aug 19 14:46:36 2008 -0500
20738 mpc85xx: remove redudant code with lib_ppc/interrupts.c
20740 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
20741 not show how that happened, but there is no good reason for it.
20743 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
20746 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20748 commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
20749 Author: Kumar Gala <galak@kernel.crashing.org>
20750 Date: Fri Jul 25 13:31:05 2008 -0500
20752 mpc85xx: Add support for the MPC8536DS reference board
20754 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20755 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
20756 Signed-off-by: Dejan Minic <minic@freescale.com>
20757 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20758 Signed-off-by: Dave Liu <daveliu@freescale.com>
20759 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20761 commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
20762 Author: Kumar Gala <galak@kernel.crashing.org>
20763 Date: Tue Aug 12 11:14:19 2008 -0500
20765 mpc85xx: Add support for the MPC8536
20767 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
20768 also have SERDES init code for the 8536.
20770 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20771 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
20772 Signed-off-by: Dejan Minic <minic@freescale.com>
20773 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20774 Signed-off-by: Dave Liu <daveliu@freescale.com>
20776 commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
20777 Author: Kumar Gala <galak@kernel.crashing.org>
20778 Date: Tue Aug 12 11:13:08 2008 -0500
20780 mpc85xx: Add support for the MPC8572DS reference board
20782 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20784 commit 457caecdbca3df21a93abff19eab12dbc61b7897
20785 Author: Kumar Gala <galak@kernel.crashing.org>
20786 Date: Wed Aug 27 01:05:35 2008 -0500
20788 FSL DDR: Remove old SPD support from cpu/mpc85xx
20790 All 85xx boards have been converted to the new code so we can
20791 remove the old SPD DDR setup code.
20793 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20795 commit 0e7927db138976469e7257e29c1338050a50fcd9
20796 Author: Kumar Gala <galak@kernel.crashing.org>
20797 Date: Wed Aug 27 01:04:07 2008 -0500
20799 FSL DDR: Convert STXSSA to new DDR code.
20801 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20803 commit c360d9b970fbb9c13744c355879671165bbb9b9e
20804 Author: Kumar Gala <galak@kernel.crashing.org>
20805 Date: Wed Aug 27 01:03:42 2008 -0500
20807 FSL DDR: Convert STXGP3 to new DDR code.
20809 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20811 commit 8e55313b7ae12352a343f9b9962e662dbd897187
20812 Author: Kumar Gala <galak@kernel.crashing.org>
20813 Date: Tue Aug 26 23:52:58 2008 -0500
20815 FSL DDR: Convert SBC8560 to new DDR code.
20817 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20819 commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
20820 Author: Kumar Gala <galak@kernel.crashing.org>
20821 Date: Tue Aug 26 23:52:32 2008 -0500
20823 FSL DDR: Convert MPC8540EVAL to new DDR code.
20825 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20827 commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
20828 Author: Kumar Gala <galak@kernel.crashing.org>
20829 Date: Tue Aug 26 23:52:07 2008 -0500
20831 FSL DDR: Convert PM856 to new DDR code.
20833 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20835 commit d53bd3e17bd4f460257c19255569ea6dcfaae817
20836 Author: Kumar Gala <galak@kernel.crashing.org>
20837 Date: Tue Aug 26 23:51:49 2008 -0500
20839 FSL DDR: Convert PM854 to new DDR code.
20841 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20843 commit 33b9079ba20926f14238fff863b68a98e938948e
20844 Author: Kumar Gala <galak@kernel.crashing.org>
20845 Date: Tue Aug 26 23:15:28 2008 -0500
20847 FSL DDR: Convert sbc8548 to new DDR code.
20849 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20851 commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
20852 Author: Kumar Gala <galak@kernel.crashing.org>
20853 Date: Tue Aug 26 23:14:14 2008 -0500
20855 FSL DDR: Convert atum8548 to new DDR code.
20857 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20859 commit be0bd8234b9777ecd63c4c686f72af070d886517
20860 Author: Kumar Gala <galak@kernel.crashing.org>
20861 Date: Tue Aug 26 22:56:56 2008 -0500
20863 FSL DDR: Convert socrates to new DDR code.
20865 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20867 commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
20868 Author: Kumar Gala <galak@kernel.crashing.org>
20869 Date: Tue Aug 26 08:02:30 2008 -0500
20871 FSL DDR: Convert MPC8544DS to new DDR code.
20873 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20875 commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
20876 Author: Jon Loeliger <jdl@freescale.com>
20877 Date: Tue Mar 18 13:51:05 2008 -0500
20879 FSL DDR: Convert MPC8568MDS to new DDR code.
20881 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20882 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20884 commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
20885 Author: Jon Loeliger <jdl@freescale.com>
20886 Date: Tue Mar 18 13:51:06 2008 -0500
20888 FSL DDR: Convert MPC8548CDS to new DDR code.
20890 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20891 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20893 commit aa11d85cf318b961e029fe50d68ca47d004bce93
20894 Author: Jon Loeliger <jdl@freescale.com>
20895 Date: Mon Mar 17 15:48:18 2008 -0500
20897 FSL DDR: Convert MPC8541CDS to new DDR code.
20899 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20900 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20902 commit 2b40edb10d81da7bba724edbccd7f53777112579
20903 Author: Jon Loeliger <jdl@freescale.com>
20904 Date: Tue Mar 18 11:12:42 2008 -0500
20906 FSL DDR: Convert MPC8555ADS to new DDR code.
20908 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20909 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20911 commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
20912 Author: Jon Loeliger <jdl@freescale.com>
20913 Date: Tue Mar 18 11:12:44 2008 -0500
20915 FSL DDR: Convert MPC8560ADS to new DDR code.
20917 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20918 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20920 commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
20921 Author: Kumar Gala <galak@kernel.crashing.org>
20922 Date: Fri Jun 6 13:12:18 2008 -0500
20924 FSL DDR: Convert MPC8540ADS to new DDR code.
20926 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20928 commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
20929 Author: Kumar Gala <galak@kernel.crashing.org>
20930 Date: Tue Aug 26 21:34:55 2008 -0500
20932 FSL DDR: Add 85xx specific register setting
20934 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20936 commit 6fb1b7346849ccd0c20306143e334f5b76143070
20937 Author: Kumar Gala <galak@kernel.crashing.org>
20938 Date: Mon Jun 9 11:07:46 2008 -0500
20940 FSL DDR: Add e500 TLB helper for DDR code
20942 Provide a helper function that board code can call to map TLBs when
20945 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20947 commit d26b739afe5a6760bd345743188759cd9d0f3b47
20948 Author: Andrew Dyer <adyer@righthandtech.com>
20949 Date: Tue Aug 26 17:03:38 2008 -0500
20951 dm9000 remove dead external phy support, gpio fix
20953 dm9000 has code to detect and initialize external phy parts, but later
20954 on in the code the part is forced to use the internal phy
20955 unconditionally. Remove the unused/untested code.
20957 change the GPIO initialization so that only the GPIO used as an
20958 internal phy reset (hardwired in the chip) is set as an output. The
20959 remaining GPIO need to be handled by board specific code to prevent
20960 possible drive conflicts. Set as inputs for safety.
20962 replace a few magic numbers with defines
20964 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
20965 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20967 commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
20968 Author: Peter Tyser <ptyser@xes-inc.com>
20969 Date: Tue Aug 26 11:17:48 2008 -0500
20971 Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
20973 cmd_net.c command descriptions were updated to describe the optional
20974 hostIPaddr argument. The dhcp command help message was also updated
20975 to more closely reflect the other commands in cmd_net.c
20977 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
20978 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20980 commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
20981 Author: Remy Bohmer <linux@bohmer.net>
20982 Date: Wed Aug 20 11:30:28 2008 +0200
20984 Fix bogus error message in the DHCP handler
20986 The DHCP handler has 1 state that is not listed in this case, causing a
20987 failure message when there is actually no failure.
20989 Signed-off-by: Remy Bohmer <linux@bohmer.net>
20990 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20992 commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
20993 Author: Remy Bohmer <linux@bohmer.net>
20994 Date: Wed Aug 20 11:30:27 2008 +0200
20996 Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
20998 The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
20999 missing extern inside the net/bootp.h header
21001 Signed-off-by: Remy Bohmer <linux@bohmer.net>
21002 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21004 commit 1803f7f91ff35ca402259065df7557107dcf28a2
21005 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21006 Date: Tue Aug 19 21:26:32 2008 +0000
21008 ColdFire: Add FEC Buffer descriptors in SRAM
21010 Add FEC Buffer descriptors and data buffer in SRAM for
21011 faster execution and access.
21013 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21014 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21016 commit 429be27ce195210d4b9decf9e867b9ca6155a87d
21017 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21018 Date: Thu Aug 21 23:55:11 2008 +0000
21020 Fix ColdFire FEC warning messages
21022 Types mismatch and implicit declaration of icache_invalid()
21025 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21026 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21028 commit 6a002171098e968bd5b362347d2831224fab6048
21029 Author: Ben Warren <biggerbadderben@gmail.com>
21030 Date: Sat Jul 12 00:17:50 2008 -0700
21032 Moved initialization of SKGE Ethernet driver to board code.
21034 The only board using this driver is the SL8245 board.
21035 Removed initialization for the driver from net/eth.c
21037 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21039 commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
21040 Author: Ben Warren <biggerbadderben@gmail.com>
21041 Date: Sat Jul 12 00:08:45 2008 -0700
21043 Moved conditional compilation to Makefile for SK98 Ethernet driver
21045 Brute-force removal of #ifdefs. Didn't touch the code.
21046 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21048 commit 65d3d99c28dc363d15eaee78225ff643df499b97
21049 Author: Ben Warren <biggerbadderben@gmail.com>
21050 Date: Fri Jul 11 23:42:19 2008 -0700
21052 Moved initialization of ULI526X Ethernet driver to board code.
21054 The only board using this driver is the Freescale MPC8610HPCD board.
21055 Removed initialization for the driver from net/eth.c
21057 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21059 commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
21060 Author: Ben Warren <biggerbadderben@gmail.com>
21061 Date: Fri Jul 11 23:15:28 2008 -0700
21063 Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
21065 Added board_eth_init() function to bf537-stamp board.
21066 Removed initialization for the Blackin EMAC driver from net/eth.c
21068 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21070 commit fc363ce35408f348cacced68505f3747a53e3d7c
21071 Author: Ben Warren <biggerbadderben@gmail.com>
21072 Date: Wed Jul 9 01:04:19 2008 -0700
21074 Moved initialization of GRETH Ethernet driver to CPU directory
21076 Added a cpu_eth_init() function to leon2/leon3 CPU directories and
21077 removed code from net/eth.c
21079 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21081 commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
21082 Author: Ben Warren <biggerbadderben@gmail.com>
21083 Date: Tue Aug 26 22:16:25 2008 -0700
21085 Moved initialization of MCFFEC Ethernet driver to CPU directory
21087 Added a cpu_eth_init() function to coldfire CPU directories and
21088 removed code from net/eth.c
21090 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21092 commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
21093 Author: Ben Warren <biggerbadderben@gmail.com>
21094 Date: Tue Aug 26 22:12:36 2008 -0700
21096 Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
21098 Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
21099 removed code from net/eth.c
21101 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21103 commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
21104 Author: Kumar Gala <galak@kernel.crashing.org>
21105 Date: Tue Aug 26 15:01:38 2008 -0500
21107 FSL DDR: Remove old SPD support from cpu/mpc86xx
21109 All 86xx boards have been converted to the new code so we can
21110 remove the old SPD DDR setup code.
21112 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21114 commit 9bd4e5911b750837515466bc7449087698b88e0e
21115 Author: Kumar Gala <galak@kernel.crashing.org>
21116 Date: Tue Aug 26 15:01:37 2008 -0500
21118 FSL DDR: Convert SBC8641D to new DDR code.
21120 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21122 commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
21123 Author: Jon Loeliger <jdl@freescale.com>
21124 Date: Tue Aug 26 15:01:36 2008 -0500
21126 FSL DDR: Convert MPC8610HPCD to new DDR code.
21128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21131 commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
21132 Author: Kumar Gala <galak@kernel.crashing.org>
21133 Date: Tue Aug 26 15:01:35 2008 -0500
21135 FSL DDR: Convert MPC8641HPCN to new DDR code.
21137 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21138 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21140 commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
21141 Author: Kumar Gala <galak@kernel.crashing.org>
21142 Date: Tue Aug 26 15:01:34 2008 -0500
21144 FSL DDR: Add 86xx specific register setting
21146 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21148 commit 233fdd502a6c227f476212b3097653ad48d7e254
21149 Author: Kumar Gala <galak@kernel.crashing.org>
21150 Date: Tue Aug 26 15:01:32 2008 -0500
21152 FSL DDR: Add DDR2 DIMM paramter support
21154 Compute DIMM parameters based upon the SPD information.
21156 Signed-off-by: James Yang <James.Yang@freescale.com>
21157 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21158 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21160 commit 05c05a2363a6ac11e0e405926034546ffad71fad
21161 Author: Kumar Gala <galak@kernel.crashing.org>
21162 Date: Tue Aug 26 15:01:30 2008 -0500
21164 FSL DDR: Add DDR1 DIMM paramter support
21166 Compute DIMM parameters based upon the SPD information in spd.
21168 Signed-off-by: James Yang <James.Yang@freescale.com>
21169 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21170 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21172 commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
21173 Author: Kumar Gala <galak@kernel.crashing.org>
21174 Date: Tue Aug 26 15:01:29 2008 -0500
21176 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
21178 The main purpose of this rewrite it to be able to share the same
21179 initialization code on all FSL PowerPC products that have DDR
21180 controllers. (83xx, 85xx, 86xx).
21182 The code is broken up into the following steps:
21185 COMPUTE_COMMON_PARMS
21191 This allows us to share more code an easily allow for board specific code
21194 Additionally this code base adds support for >4G of DDR and provides a
21195 foundation for supporting interleaving on processors with more than one
21198 Signed-off-by: James Yang <James.Yang@freescale.com>
21199 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21200 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
21201 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
21202 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21204 commit f784e32b4bce0013983506b11af4b85b8ca3d36e
21205 Author: Kumar Gala <galak@kernel.crashing.org>
21206 Date: Tue Aug 26 15:01:28 2008 -0500
21208 FSL DDR: Provide a generic set_ddr_laws()
21210 Provide a helper function that will setup the last available
21211 LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
21213 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21215 commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
21216 Author: James Yang <James.Yang@freescale.com>
21217 Date: Tue Aug 26 15:01:27 2008 -0500
21219 Add proper SPD definitions for DDR1/2/3
21221 Also adds helper functions for DDR1/2 to verify the checksum.
21223 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21225 commit 285db74716c724ae8a0ff177878fd09a74428c7b
21226 Author: Wolfgang Denk <wd@denx.de>
21227 Date: Wed Aug 27 01:02:48 2008 +0200
21231 Signed-off-by: Wolfgang Denk <wd@denx.de>
21233 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
21234 Author: Heiko Schocher <hs@denx.de>
21235 Date: Tue Aug 19 10:08:49 2008 +0200
21237 Add support for muas3001 board (MPC8270)
21239 Signed-off-by: Heiko Schocher <hs@denx.de>
21241 commit 322098bff32410d2a00031649b47c4ec90a66d9a
21242 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
21243 Date: Tue Aug 19 08:31:18 2008 +0530
21245 common/cmd_load.c cleanup - remove unused variables
21247 - Remove unused global variable os_data_count.
21248 - Remove unused variable z.
21250 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
21252 commit 306620b762a4f9fa6678568ad2e8772dec145208
21253 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21254 Date: Mon Aug 18 13:35:27 2008 +0200
21258 MVS1 board has reached end-of-life and can be removed completely.
21260 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21262 commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
21263 Author: Kumar Gala <galak@kernel.crashing.org>
21264 Date: Fri Aug 15 08:24:45 2008 -0500
21266 bootm: refactor do_reset and os boot function args
21268 There is no need for each OS specific function to call do_reset() we
21269 can just do it once in bootm. This means its feasible on an error for
21270 the OS boot function to return.
21272 Also, remove passing in cmd_tbl_t as its not needed by the OS boot
21273 functions. flag isn't currently used but might be in the future so
21276 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21278 commit 40afac22a9c602e55c501c800f1c064324711b56
21279 Author: Kumar Gala <galak@kernel.crashing.org>
21280 Date: Fri Aug 15 08:24:44 2008 -0500
21282 fdt: Added resize command
21284 Resize the fdt to size + padding to 4k boundary
21286 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21288 commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
21289 Author: Kumar Gala <galak@kernel.crashing.org>
21290 Date: Fri Aug 15 08:24:43 2008 -0500
21292 fdt: refactor initrd related code
21294 Created a new fdt_initrd() to deal with setting the initrd properties
21295 in the device tree and fixing up the mem reserve. We can use this
21296 both in the choosen node handling and lets us remove some duplicated
21297 code when we fixup the initrd info in bootm on PPC.
21299 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21301 commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
21302 Author: Kumar Gala <galak@kernel.crashing.org>
21303 Date: Fri Aug 15 08:24:42 2008 -0500
21305 fdt: refactor fdt resize code
21307 Move the fdt resizing code out of ppc specific boot code and into
21308 common fdt support code.
21310 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21312 commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
21313 Author: Kumar Gala <galak@kernel.crashing.org>
21314 Date: Fri Aug 15 08:24:41 2008 -0500
21316 bootm: refactor image detection and os load steps
21318 Created a bootm_start() that handles the parsing and detection of all
21319 the images that will be used by the bootm command (OS, ramdisk, fdt).
21320 As part of this we now tract all the relevant image offsets in the
21321 bootm_headers_t struct. This will allow us to have all the needed
21322 state for future sub-commands and lets us reduce a bit of arch
21323 specific code on SPARC.
21325 Created a bootm_load_os() that deals with decompression and loading
21328 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21330 commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
21331 Author: Kumar Gala <galak@kernel.crashing.org>
21332 Date: Fri Aug 15 08:24:40 2008 -0500
21334 bootm: move lmb into the bootm_headers_t structure
21336 To allow for persistent state between future bootm subcommands we
21337 need the lmb to exist in a global state.
21338 Moving it into the bootm_headers_t allows us to do that.
21340 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21342 commit 54f9c86691309b2f919f567f9255b8bcad2c7651
21343 Author: Kumar Gala <galak@kernel.crashing.org>
21344 Date: Fri Aug 15 08:24:39 2008 -0500
21346 bootm: Set working fdt address as part of the bootm flow
21348 Set the fdt working address so "fdt FOO" commands can be used as part
21349 of the bootm flow. Also set an the environment variable "fdtaddr"
21352 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21354 commit 06a09918f3903450313e2047a9cc258bf5872f46
21355 Author: Kumar Gala <galak@kernel.crashing.org>
21356 Date: Fri Aug 15 08:24:38 2008 -0500
21358 bootm: refactor fdt locating and relocation code
21360 Move the code that handles finding a device tree blob and relocating
21361 it (if needed) into common code so all arch's have access to it.
21363 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21365 commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
21366 Author: Kumar Gala <galak@kernel.crashing.org>
21367 Date: Fri Aug 15 08:24:37 2008 -0500
21369 bootm: refactor ramdisk locating code
21371 Move determing if we have a ramdisk and where its located into the
21372 common code. Keep track of the ramdisk start and end in the
21373 bootm_headers_t image struct.
21375 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21377 commit c160a9544743e80e8889edb2275538e7764ce334
21378 Author: Kumar Gala <galak@kernel.crashing.org>
21379 Date: Fri Aug 15 08:24:36 2008 -0500
21381 bootm: refactor entry point code
21383 Move entry point code out of each arch and into common code.
21384 Keep the entry point in the bootm_headers_t images struct.
21386 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21388 commit 20220d22b9f41446288588cd2e457e0077a18bed
21389 Author: Randy Vinson <rvinson@mvista.com>
21390 Date: Wed Aug 13 11:44:57 2008 -0700
21392 mpc7448hpc2: Fix PCI I/O space mapping.
21394 PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
21395 PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
21396 space such that 0xFA000000 in the processor's address space maps to 0
21397 on the PCI I/O bus.
21399 Signed-off-by Randy Vinson <rvinson@mvista.com>
21400 Acked-by: Roy Zang <tie-fei.zang@freescale.com>
21402 commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
21403 Author: Guennadi Liakhovetski <lg@denx.de>
21404 Date: Wed Aug 13 18:10:26 2008 +0200
21406 i.MX31: Specify maintainers for i.MX31-based boards
21408 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21409 Signed-off-by: Wolfgang Denk <wd@denx.de>
21411 commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
21412 Author: Wolfgang Denk <wd@denx.de>
21413 Date: Tue Aug 26 15:01:28 2008 +0200
21415 ADS5121: adjust image addresses in RAM and flash
21417 Use the same mapping in flash as used by Linux
21419 Signed-off-by: Wolfgang Denk <wd@denx.de>
21421 commit 19f101412c16edee9fd55db4039e1d68a833b28b
21422 Author: Wolfgang Denk <wd@denx.de>
21423 Date: Tue Aug 26 13:14:34 2008 +0200
21425 cmd_mem.c: Fix help message alignment
21427 Bug was introced by "Big white-space cleanup" (53677ef1)
21429 Signed-off-by: Wolfgang Denk <wd@denx.de>
21431 commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
21432 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21433 Date: Wed Aug 20 11:11:52 2008 +0200
21435 change mvBL-M7 default env and move to vendor subdir
21437 fix mvBL-M7 config and move to matrix_vision subdir
21439 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21440 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21442 commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
21443 Author: Nick Spence <nick.spence@freescale.com>
21444 Date: Fri Aug 22 23:52:40 2008 -0700
21446 MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
21448 This patch adds elements to the 83xx sysconf structure and #define values that are used
21449 by mpc83xx family devices.
21451 Signed-off-by: Nick Spence <nick.spence@freescale.com>
21452 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21454 commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
21455 Author: Ira W. Snyder <iws@ovro.caltech.edu>
21456 Date: Fri Aug 22 11:00:15 2008 -0700
21458 MPC8349EMDS: Add PCI Agent (PCISLAVE) support
21460 Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
21461 PCI card rather than a host computer.
21463 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
21464 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21466 commit 4ff9aea9d6b5602683a920951ef896996438af62
21467 Author: Ira W. Snyder <iws@ovro.caltech.edu>
21468 Date: Fri Aug 22 11:00:14 2008 -0700
21470 mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
21472 This adds a helper function to unlock the PCI configuration bit, so that
21473 any extra PCI setup (such as outbound windows, etc.) can be done after
21474 using the 83XX_GENERIC_PCI code to set up the PCI bus.
21476 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
21477 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21479 commit 162338e1fcde231ca4d562e5ebd7859456731691
21480 Author: Ira W. Snyder <iws@ovro.caltech.edu>
21481 Date: Fri Aug 22 11:00:13 2008 -0700
21483 MPC8349EMDS: use 83XX_GENERIC_PCI setup code
21485 Change the MPC8349EMDS board to use the generic PCI initialization code
21486 for the mpc83xx cpu.
21488 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
21489 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21491 commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
21492 Author: Kim Phillips <kim.phillips@freescale.com>
21493 Date: Mon Aug 25 14:53:09 2008 -0500
21495 fix out of tree building
21497 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21499 commit a49d10cf027d059ee15c262010a05cdaec0961e1
21500 Author: Wolfgang Denk <wd@denx.de>
21501 Date: Mon Aug 25 23:45:41 2008 +0200
21503 Minor coding style cleanup, updte CHANGELOG
21505 Signed-off-by: Wolfgang Denk <wd@denx.de>
21507 commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
21508 Author: Stefan Roese <sr@denx.de>
21509 Date: Wed Aug 20 20:29:38 2008 +0200
21511 RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
21513 This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
21514 to combine both config options into one line. This even allows defining
21515 both options and not generating the target object twice.
21517 Signed-off-by: Stefan Roese <sr@denx.de>
21519 commit 079edb913dbae147b50a488cf02e03f473fc5f28
21520 Author: Jens Gehrlein <sew_s@tqs.de>
21521 Date: Fri Jul 4 16:50:05 2008 +0200
21523 MX31: fix bit masks in function mx31_decode_pll()
21525 Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
21527 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
21529 commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
21530 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
21531 Date: Mon Aug 25 11:11:34 2008 +0200
21533 Correct ARM Versatile Timer Initialization
21535 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
21536 -- Timer Value Register @ TIMER Base + 4 is Read-only.
21537 -- Prescale Value (Bits 3-2 of TIMER Control register)
21538 can only be one of 00,01,10. 11 is undefined.
21539 -- CFG_HZ for Versatile board is set to
21540 #define CFG_HZ (1000000 / 256)
21541 So Prescale bits is set to indicate
21542 - 8 Stages of Prescale, Clock divided by 256
21543 - The Timer Control Register has one Undefined/Shouldn't Use Bit
21544 So we should do read/modify/write Operation
21546 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
21548 commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
21549 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
21550 Date: Mon Aug 25 11:30:29 2008 +0200
21552 Add ARM AMBA PL031 RTC Support
21554 Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
21556 commit e39411674669cc880e1ec4a8ca4794fb15c33a45
21557 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
21558 Date: Tue Aug 19 16:21:03 2008 -0400
21560 ARM DaVinci: Removed redundant NAND initialization code.
21562 ARM DaVinci: Removed redundant NAND initialization code.
21564 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
21566 commit b3fb663b20d995ca41327db877ddb168279b3f62
21567 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
21568 Date: Tue Aug 19 16:21:00 2008 -0400
21570 ARM DaVinci: Fix compilation error with new MTD code.
21572 ARM DaVinci: Fix compilation error with new MTD code.
21574 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
21576 commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
21577 Author: Gerald Van Baren <vanbaren@cideas.com>
21578 Date: Fri Aug 22 14:37:05 2008 -0400
21580 Add note on dereferencing /aliases pointers
21582 Replace the "must quote special characters" note with a hint on
21583 how to dereference /aliases pointers by omitting the leading "/".
21584 This feature was introduced by Kumar Gala as a libfdt enhancement
21585 in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
21589 => fdt print /aliases
21591 ethernet0 = "/qe@e0100000/ucc@2000";
21592 ethernet1 = "/qe@e0100000/ucc@3000";
21593 serial0 = "/soc8360@e0000000/serial@4500";
21594 serial1 = "/soc8360@e0000000/serial@4600";
21595 pci0 = "/pci@e0008500";
21597 => fdt print ethernet0
21599 device_type = "network";
21600 compatible = "ucc_geth";
21601 cell-index = <0x1>;
21602 reg = <0x2000 0x200>;
21603 interrupts = <0x20>;
21604 interrupt-parent = <0x2>;
21605 local-mac-address = [00 00 00 00 00 00];
21606 rx-clock-name = "none";
21607 tx-clock-name = "clk9";
21608 phy-handle = <0x3>;
21609 phy-connection-type = "rgmii-id";
21610 pio-handle = <0x4>;
21613 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
21615 commit feeca3f578b7f53c032ba203698751c982f8bf5a
21616 Author: Kumar Gala <galak@kernel.crashing.org>
21617 Date: Thu Aug 14 08:28:19 2008 -0500
21619 libfdt: Add support for using aliases in fdt_path_offset()
21621 If the path doesn't start with '/' check to see if it matches some alias
21622 under "/aliases" and substitute the matching alias value in the path
21623 and retry the lookup.
21625 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21626 Acked-by: David Gibson <david@gibson.dropbear.id.au>
21627 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
21629 commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
21630 Author: David Gibson <david@gibson.dropbear.id.au>
21631 Date: Wed Aug 6 14:50:49 2008 +1000
21633 libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
21635 As well as fdt_subnode_offset(), libfdt includes an
21636 fdt_subnode_offset_namelen() function that takes the subnode name to
21637 look up not as a NUL-terminated string, but as a string with an
21638 explicit length. This can be useful when the caller has the name as
21639 part of a longer string, such as a full path.
21641 However, we don't have corresponding 'namelen' versions for
21642 fdt_get_property() and fdt_getprop(). There are less obvious use
21643 cases for these variants on property names, but there are
21644 circumstances where they can be useful e.g. looking up property names
21645 which need to be parsed from a longer string buffer such as user input
21646 or a configuration file, or looking up an alias in a path with
21647 IEEE1275 style aliases.
21649 So, since it's very easy to implement such variants, this patch does
21650 so. The original NUL-terminated variants are, of course, implemented
21651 in terms of the namelen versions.
21653 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21655 commit f171746f701ea58bf6a53e835b53d2aaebee0d81
21656 Author: David Gibson <david@gibson.dropbear.id.au>
21657 Date: Tue Jul 29 14:51:22 2008 +1000
21659 libfdt: Forgot one function when cleaning the namespace
21661 In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
21662 libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
21663 chance of collisions with things from whatever package libfdt is
21664 embedded in, pulled into the libfdt build via that environment's
21667 Except... I missed one. This patch applies the same treatment to
21668 _stringlist_contains(). While we're at it, also make it static since
21669 it's only used in the same file.
21671 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21673 commit 46390da15411351fc3b498bd8c1615f78fe80df0
21674 Author: Wolfram Sang <w.sang@pengutronix.de>
21675 Date: Wed Jul 9 11:22:44 2008 +0200
21677 libfdt: Improve documentation in libfdt.h
21679 Fix a few typos and mistakes.
21681 Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
21682 Acked-by: David Gibson <david@gibson.dropbear.id.au>
21684 commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
21685 Author: David Gibson <david@gibson.dropbear.id.au>
21686 Date: Wed Jul 9 14:10:24 2008 +1000
21688 libfdt: Increase namespace-pollution paranoia
21690 libfdt is supposed to easy to embed in projects all and sundry.
21691 Often, it won't be practical to separate the embedded libfdt's
21692 namespace from that of the surrounding project. Which means there can
21693 be namespace conflicts between even libfdt's internal/static functions
21694 and functions or macros coming from the surrounding project's headers
21697 This patch, therefore, renames a bunch of libfdt internal functions
21698 and macros and makes a few other chances to reduce the chances of
21699 namespace collisions with embedding projects. Specifically:
21700 - Internal functions (even static ones) are now named _fdt_*()
21702 - The type and (static) global for the error table in
21703 fdt_strerror() gain an fdt_ prefix
21705 - The unused macro PALIGN is removed
21707 - The memeq and streq macros are removed and open-coded in the
21708 users (they were only used once each)
21710 - Other macros gain an FDT_ prefix
21712 - To save some of the bulk from the previous change, an
21713 FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
21714 FDT_ALIGN(x, FDT_TAGSIZE)
21716 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21718 commit c66830263af19831f2b7db307f79d1943febf7f9
21719 Author: David Gibson <david@gibson.dropbear.id.au>
21720 Date: Mon Jul 7 10:14:15 2008 +1000
21722 dtc: Enable and fix -Wcast-qual warnings
21724 Enabling -Wcast-qual warnings in dtc shows up a number of places where
21725 we are incorrectly discarding a const qualification. There are also
21726 some places where we are intentionally discarding the 'const', and we
21727 need an ugly cast through uintptr_t to suppress the warning. However,
21728 most of these are pretty well isolated with the *_w() functions. So
21729 in the interests of maximum safety with const qualifications, this
21730 patch enables the warnings and fixes the existing complaints.
21732 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21733 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
21735 commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
21736 Author: David Gibson <david@gibson.dropbear.id.au>
21737 Date: Mon Jul 7 10:10:48 2008 +1000
21739 dtc: Enable and fix -Wpointer-arith warnings
21741 This patch turns on the -Wpointer-arith option in the dtc Makefile,
21742 and fixes the resulting warnings due to using (void *) in pointer
21743 arithmetic. While convenient, pointer arithmetic on void * is not
21744 portable, so it's better that we avoid it, particularly in libfdt.
21746 Also add necessary definition of uintptr_t needed by David Gibson's
21747 changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
21748 comes from stdint.h, which u-boot doesn't have). -- gvb
21750 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21751 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
21753 commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
21754 Author: Tirumala R Marri <tmarri@amcc.com>
21755 Date: Thu Aug 21 21:54:53 2008 -0700
21757 ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
21759 During recent PCI-E tests it has been found that current
21760 driverl level and de-emphasis values are not set correctly.
21761 After sweeping throgh all de-ephasis values, it was found that
21762 0x130 is a right value. Where 0x13 is driver level and 0 is
21765 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
21766 Signed-off-by: Stefan Roese <sr@denx.de>
21768 commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
21769 Author: Remy Bohmer <linux@bohmer.net>
21770 Date: Wed Aug 20 20:46:56 2008 +0200
21772 Make the YAFFS filesystem work
21774 Recently the YAFFS filesystem support has been added to U-boot.
21775 However, just enabling CONFIG_YAFFS2 is not enough to get it working.
21777 ymount will generate an exception (when dereferencing mtd->readoob()), because
21778 the genericDevice is a null pointer. Further, a lot of logging is produced
21779 while using YAFFS fs, so logging should also be disabled.
21780 Both issues are solved by this patch.
21782 With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
21783 in U-boot, as well as in Linux.
21785 Tested on a Atmel AT91SAM9261EK board.
21787 Signed-off-by: Remy Bohmer <linux@bohmer.net>
21788 Acked-by: William Juul <william.juul@tandberg.com>
21789 Signed-off-by: Scott Wood <scottwood@freescale.com>
21791 commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
21792 Author: Kyungmin Park <kmpark@infradead.org>
21793 Date: Tue Aug 19 08:42:53 2008 +0900
21795 Fix OneNAND read_oob/write_oob functions compatability
21797 Also sync with kernel OneNAND codes
21799 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21800 Signed-off-by: Scott Wood <scottwood@freescale.com>
21802 commit 8d765456c1d33f2010d2717ee58de7647fdc6346
21803 Author: Scott Wood <scottwood@freescale.com>
21804 Date: Mon Aug 18 17:11:20 2008 -0500
21806 NAND: Remove delay from nand_boot_fsl_elbc.c.
21808 It was for debugging purposes, and shouldn't have been left in.
21810 Signed-off-by: Scott Wood <scottwood@freescale.com>
21812 commit f556483734126793522fb7a8cf36af90da78f084
21813 Author: Stefan Roese <sr@denx.de>
21814 Date: Thu Aug 21 11:05:03 2008 +0200
21816 ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
21818 This patch fixes some minor issues introduced with the patch:
21819 ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
21821 - Rework memory-queue and PLB arbiter optimization code, that the
21822 local variable is not needed anymore. This removes one #ifdef.
21823 - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
21824 of XXX+ 0x01). This was not introduced by Prodyut, just a
21825 copy-paste problem.
21827 Signed-off-by: Stefan Roese <sr@denx.de>
21829 commit 079589bcfb24ba11068460276a3cc9549ab5346f
21830 Author: Prodyut Hazarika <phazarika@amcc.com>
21831 Date: Wed Aug 20 09:38:51 2008 -0700
21833 ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
21834 PPC405EX and PPC460EX/GT/SX
21836 - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
21838 - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
21839 across processors (405 and 440/460)
21840 - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
21842 - Add register bit definitions for Memory Queue Configuration registers
21844 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
21845 Signed-off-by: Stefan Roese <sr@denx.de>
21847 commit ba37aa03287c5483c61c0a3e320c8888bee0143a
21848 Author: Kumar Gala <galak@kernel.crashing.org>
21849 Date: Tue Aug 19 15:41:18 2008 -0500
21851 fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
21853 Move to using the environment variables 'ethaddr', 'eth1addr', etc..
21854 instead of bd->bi_enetaddr, bi_enet1addr, etc.
21856 This makes the code a bit more flexible to the number of ethernet
21859 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21861 commit 4cacf7c64609839f809e2f9c45873f1d65861703
21862 Author: Stefan Roese <sr@denx.de>
21863 Date: Tue Aug 19 14:57:55 2008 +0200
21865 hush: Fix printf debug macro in hush.c so that it usable in U-Boot
21867 This patch changes the debug_printf() marco for U-Boot in hush.c and
21868 moves the definition of DEBUG_SHELL to a place that is actually compiled
21871 Signed-off-by: Stefan Roese <sr@denx.de>
21873 commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
21874 Author: Heiko Schocher <hs@denx.de>
21875 Date: Tue Aug 19 09:57:41 2008 +0200
21877 cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
21879 Commit 00b1883a4cac59d97cd297b1a3a398db85982865
21880 missed a few boards:
21881 include/configs/M5253DEMO.h
21882 include/configs/ml507.h
21883 include/configs/redwood.h
21885 This patch fixes this.
21887 Signed-off-by: Heiko Schocher <hs@denx.de>
21889 commit 0768b7a872964085eece8d5e9fec9175e9deb161
21890 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21891 Date: Mon Aug 18 13:41:27 2008 +0200
21893 Consolidate strmhz() implementation
21895 ARM, i386, m68k and ppc all have identical implementations of strmhz().
21896 Other architectures don't provide this function at all.
21898 This patch moves strmhz() into lib_generic, reducing code duplication
21899 and providing a more unified API across architectures.
21901 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21903 commit a928d0df211f1d829308d335d19be3ca42558dfc
21904 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21905 Date: Mon Aug 18 12:02:51 2008 +0200
21907 fix mvbc_p board build warnings
21909 fix build warnings @ mvBC-P board by using correct types, i.e. change
21910 out_be32 to out_be16 and out_8 accordingly.
21912 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21914 commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
21915 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21916 Date: Sat Aug 16 18:54:27 2008 +0200
21918 Makefile: fix posix support on find
21920 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21922 commit bef92e215d945cc574399c1a1b00a3a76d35aa03
21923 Author: Axel Beierlein <belatronix@web.de>
21924 Date: Sat Aug 16 00:30:48 2008 +0200
21926 Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
21928 Tested with TQM5200S on STK52XX.200 Board
21930 Signed-off-by: Axel Beierlein <belatronix@web.de>
21932 commit 0800707b6d5041a840a65d556032c15c584b55f8
21933 Author: Peter Tyser <ptyser@xes-inc.com>
21934 Date: Fri Aug 15 14:36:32 2008 -0500
21936 mod_i2c_mem() bugfix
21938 The last used chip, address, and address length were not being
21939 stored for the imm and imn commands.
21941 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
21943 commit 4afbef967275b2f636abae86f91b81becee7ad03
21944 Author: Steven A. Falco <sfalco@harris.com>
21945 Date: Fri Aug 15 15:37:31 2008 -0400
21947 Fix typo in spelling of ATAPI.
21949 Correct a small spelling mistake.
21951 Signed-off-by: Steven A. Falco <sfalco@harris.com>
21953 commit 36c2d3062ecc6ab85f8e237180eb134464c48418
21954 Author: Steven A. Falco <sfalco@harris.com>
21955 Date: Fri Aug 15 15:34:10 2008 -0400
21957 Add a hook to allow board-specific PIO mode setting.
21959 This patch adds a hook whereby a board-specific routine can be called to
21960 configure hardware for a PIO mode. The prototype for the board-specific
21963 int inline ide_set_piomode(int pio_mode)
21965 ide_set_piomode should be prepared to configure hardware for a pio_mode
21966 between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
21968 Signed-off-by: Steven A. Falco <sfalco@harris.com>
21970 commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
21971 Author: Steven A. Falco <sfalco@harris.com>
21972 Date: Fri Aug 15 15:29:12 2008 -0400
21974 Replace enums in ata.h with an include of libata.h
21976 This patch removes some enums from ata.h and replaces them with an
21977 include of libata.h. This way, we eliminate duplicated code, and
21978 prevent errors whereby the different versions could be out of sync.
21980 Signed-off-by: Steven A. Falco <sfalco@harris.com>
21982 commit 0de0afbca865ecf482b4d2b635236746def8518f
21983 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21984 Date: Fri Aug 15 18:32:41 2008 +0200
21986 coldfire: fix CFI drivers activation with new macro
21988 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
21990 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21992 commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
21993 Author: Kumar Gala <galak@kernel.crashing.org>
21994 Date: Fri Aug 15 08:24:35 2008 -0500
21996 fdt: fdt addr w/o any args reports back the current working address
21998 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22000 commit f953d99fd528a496b400a706b511eaf8e3ea66af
22001 Author: Kumar Gala <galak@kernel.crashing.org>
22002 Date: Fri Aug 15 08:24:34 2008 -0500
22004 fdt: added the ability to set initrd start/end via chosen command
22006 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22008 commit ffa4bafacaef67058463b3d7d0099ced57569dd2
22009 Author: Kumar Gala <galak@kernel.crashing.org>
22010 Date: Fri Aug 15 08:24:33 2008 -0500
22012 Add command to enable/disable interrupts
22014 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22016 commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
22017 Author: Nick Spence <nick.spence@freescale.com>
22018 Date: Tue Aug 19 22:21:16 2008 -0700
22020 CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
22022 This patch fixes a missing vendor code in the flash_real_protect() function.
22024 Signed-off-by: Nick Spence <nick.spence@freescale.com>
22025 Signed-off-by: Stefan Roese <sr@denx.de>
22027 commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
22028 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22029 Date: Tue Aug 19 16:53:39 2008 +0000
22031 CFI: Fix AMD Legacy sector protect
22033 New implement sector lock and unlock or softlock commands
22034 do not exist in AMD legacy flash. Thus, causing issue
22035 when erasing AMD legacy flash (such as lv040)
22037 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22038 Signed-off-by: Stefan Roese <sr@denx.de>
22040 commit 492671404140f09d5b21b3d2ce4e362c0692c069
22041 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22042 Date: Wed Aug 20 09:40:16 2008 +0200
22044 hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
22046 CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
22048 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22050 commit 33eac2b3d946fc998a09245dfe54d017079b9056
22051 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22052 Date: Wed Aug 20 09:28:36 2008 +0200
22054 hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
22056 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22058 commit 25da0b84195fdda89a943b2d25757db5afeef5b8
22059 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22060 Date: Wed Aug 20 09:27:37 2008 +0200
22062 favr-32-ezkit: Fix printf format warnings
22064 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22066 commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
22067 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22068 Date: Fri Aug 15 12:04:25 2008 +0200
22070 MAINTAINERS: Sort avr32 section alphabetically
22072 The rest of the MAINTAINERS file appears to be sorted
22073 almost-alphabetically, but entries for the newly added AVR32 boards were
22074 added somewhat randomly. This patch sorts the list alphabetically again.
22076 Also update my e-mail address. The old one still works, but it may not
22079 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22081 commit 13b50fe3bc065c48911fa373231421280855a9d6
22082 Author: Mark Jackson <mpfj@mimc.co.uk>
22083 Date: Wed Jul 30 13:07:27 2008 +0100
22085 avr32: Add MIMC200 board
22087 The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
22088 8MByte FLASH and 128KByte FRAM.
22090 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
22091 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22093 commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
22094 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
22095 Date: Wed Jul 9 21:07:34 2008 +0900
22097 rtl8169: add support for RTL8110SCL
22099 This patch fixes a problem that RTL8110SCL started transfer
22100 with an incorrect memory address.
22102 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
22103 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22105 commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
22106 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22107 Date: Wed Jun 25 15:48:52 2008 -0500
22109 Fix dm9000 receive status and len little endian issue
22111 The received status and len was in little endian
22112 format and caused the ethernet unable to proceed
22113 further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
22115 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22116 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22118 commit fcd69a1a57fb2af4d26201422095a4be9f36963e
22119 Author: Kumar Gala <galak@kernel.crashing.org>
22120 Date: Fri Aug 15 08:24:32 2008 -0500
22122 Clean up usage of icache_disable/dcache_disable
22124 There is no point in disabling the icache on 7xx/74xx/86xx parts and not
22125 also flushing the icache. All callers of invalidate_l1_instruction_cache()
22126 call icache_disable() right after. Make it so icache_disable() calls
22127 invalidate_l1_instruction_cache() for us.
22129 Also, dcache_disable() already calls dcache_flush() so there is no point
22130 in the explicit calls of dcache_flush().
22132 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22134 commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
22135 Author: Kumar Gala <galak@kernel.crashing.org>
22136 Date: Fri Aug 15 08:24:31 2008 -0500
22138 Update linux bootm to support ePAPR client interface
22140 The ePAPR spec has some subtle differences from the current device
22141 tree based boot interface to the powerpc linux kernel. The powerpc
22142 linux kernel currently ignores the differences that ePAPR specifies.
22144 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22146 commit b734e5556a239b3be5f9693b2f4b4b739683ec16
22147 Author: Wolfgang Denk <wd@denx.de>
22148 Date: Mon Aug 18 23:50:20 2008 +0200
22150 Minor code cleanup: keep lists sorted.
22152 Signed-off-by: Wolfgang Denk <wd@denx.de>
22154 commit d0039d4ed275e6ca09fb417895024ad02be118c4
22155 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22156 Date: Wed Jul 23 19:10:14 2008 +0200
22158 Add support for ADT7460 I2C monitor chip
22160 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22162 commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
22163 Author: Michal Simek <monstr@monstr.eu>
22164 Date: Mon Jul 14 19:45:45 2008 +0200
22166 video: Clean drivers/video/Makefile
22168 Signed-off-by: Michal Simek <monstr@monstr.eu>
22170 commit 871c18dd301752270e1f74328c846c3104be1e2e
22171 Author: Michal Simek <monstr@monstr.eu>
22172 Date: Mon Jul 14 19:45:37 2008 +0200
22174 rtc: Clean drivers/rtc/Makefile
22176 Signed-off-by: Michal Simek <monstr@monstr.eu>
22178 commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
22179 Author: Michal Simek <monstr@monstr.eu>
22180 Date: Mon Jul 14 19:45:35 2008 +0200
22182 i2c: Clean drivers/i2c/ Makefile
22184 Signed-off-by: Michal Simek <monstr@monstr.eu>
22186 commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
22187 Author: Harald Welte <laforge@openmoko.org>
22188 Date: Wed Jul 9 22:30:30 2008 +0800
22190 Add 'license' command to U-Boot command line
22192 The 'license' command includes the U-Boot license (GPLv2) into the
22193 actual bootloader binary. The license text can be shown interactively
22194 at the U-Boot commandline.
22196 For products where the commandline can actually be accessed by the
22197 end user, this helps to prevent inadvertent GPL violations, since the
22198 GPLv2 license text can no longer be 'forgotten' to be included into
22201 The 'license' command can be enabled by CONFIG_CMD_LICENSE.
22203 Signed-off-by: Harald Welte <laforge@openmoko.org>
22205 commit fe2ce5500ebf43d79d227190bd2370232d5b113d
22206 Author: Harald Welte <laforge@gnumonks.org>
22207 Date: Sun Jul 6 15:56:38 2008 +0800
22209 add 'unzip' command to u-boot commandline
22211 [PATCH] add new 'unzip' command to u-boot commandline
22213 common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
22214 memory to memory, and option CONFIG_CMD_UNZIP to enable it
22216 Signed-off-by: Werner Almesberger <werner@openmoko.org>
22217 Signed-off-by: Harald Welte <laforge@openmoko.org>
22219 commit 07efc9e321619c3dec213310c32e011aa6f02783
22220 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22221 Date: Wed Aug 6 19:37:17 2008 -0500
22223 Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
22225 The CFG_ENV_SIZE is not suitable used for SPI flash erase
22226 sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
22227 Add condition check if CFG_ENV_SIZE is larger than
22228 CFG_ENV_SECT_SIZE, calculate the right number of sectors for
22231 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22233 commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
22234 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22235 Date: Mon Aug 11 15:54:25 2008 +0000
22237 ColdFire: Multiple fixes for M5282EVB
22239 Incorrect CFG_HZ value, change 1000000 to 1000.
22240 Rename #waring to #warning. RAMBAR1 uses twice
22241 in start.S, rename the later to FLASHBAR. Insert
22242 nop for DRAM setup. And, env_offset in linker file.
22244 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22246 commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
22247 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22248 Date: Mon Aug 11 15:26:43 2008 +0000
22250 ColdFire: Move m5282evb from board to board/freescale
22252 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22254 commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
22255 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22256 Date: Mon Aug 11 15:25:07 2008 +0000
22258 ColdFire: Move m5272c3 from board to board/freescale
22260 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22262 commit 659e9bad629a480f606b286d5703aef7159edf98
22263 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22264 Date: Mon Aug 11 15:23:16 2008 +0000
22266 ColdFire: Move m5271evb from board to board/freescale
22268 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22270 commit 05316f8ece8206339a208ec052f039cd0f7ca922
22271 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22272 Date: Mon Aug 11 13:41:49 2008 +0000
22274 ColdFire: Add M54451EVB platform support for MCF5445x
22276 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22278 commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
22279 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22280 Date: Wed Aug 6 19:14:08 2008 -0500
22282 ColdFire: Add Serial Flash support for M54455EVB
22284 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22286 commit 9f751551456828b2d0ff417f10959fb0c7110bd0
22287 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22288 Date: Wed Jul 23 20:38:53 2008 -0500
22290 ColdFire: Implement SBF feature for M5445EVB
22292 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22294 commit a7323bba229203aae2604afde131ab47bad4eadc
22295 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22296 Date: Wed Jul 23 17:53:36 2008 -0500
22298 ColdFire: Add SSPI feature for MCF5445x
22300 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22302 commit b2d022d1ac3f59bffa9cec249341e77aea168abc
22303 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22304 Date: Wed Jul 23 17:37:10 2008 -0500
22306 ColdFire: Use CFI Flash driver for M54455EVB
22308 Remove non-common flash driver in
22309 board/freescale/m54455evb/flash.c. The non-cfi flash will
22310 use CONFIG_FLASH_CFI_LEGACY to configure the flash
22313 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22315 commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
22316 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22317 Date: Wed Jul 23 17:11:47 2008 -0500
22319 ColdFire: Add M5253DEMO platform support for MCF5253
22321 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22323 commit 80ba61fd82569af40e04d4a089257b81881884f2
22324 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22325 Date: Wed Aug 6 14:17:09 2008 -0500
22327 ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
22329 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22331 commit d361307e73ce1f6fc68760123f37d4876f851f3e
22332 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22333 Date: Wed Aug 6 14:11:36 2008 -0500
22335 ColdFire: Fix M5253EVB dram bring up issue
22337 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22339 commit 4b0708093e15b412296328bf81325cf9b69fe512
22340 Author: Wolfgang Denk <wd@denx.de>
22341 Date: Thu Aug 14 14:41:06 2008 +0200
22343 Coding Style cleanup, update CHANGELOG
22345 Signed-off-by: Wolfgang Denk <wd@denx.de>
22347 commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
22348 Author: Scott Wood <scottwood@freescale.com>
22349 Date: Wed Aug 13 18:24:05 2008 -0500
22351 socrates: Update NAND driver to new API.
22353 Also, fix some minor formatting issues, and simplify the handling of
22354 "state" for writes.
22356 Signed-off-by: Scott Wood <scottwood@freescale.com>
22358 commit ba22d10f39eaeedd035e8265616e31ff88e314d5
22359 Author: Scott Wood <scottwood@freescale.com>
22360 Date: Wed Aug 13 18:03:40 2008 -0500
22362 quad100hd: Update NAND driver to new API.
22364 Signed-off-by: Scott Wood <scottwood@freescale.com>
22366 commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
22367 Author: Scott Wood <scottwood@freescale.com>
22368 Date: Wed Aug 13 17:53:48 2008 -0500
22370 m5373evb: Update NAND driver to new API.
22372 Signed-off-by: Scott Wood <scottwood@freescale.com>
22374 commit 1a23a197c8722b805f40895544bbdb1a648c1c82
22375 Author: Scott Wood <scottwood@freescale.com>
22376 Date: Wed Aug 13 17:04:30 2008 -0500
22378 s3c24x0: Update NAND driver to new API.
22380 Signed-off-by: Scott Wood <scottwood@freescale.com>
22382 commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
22383 Author: Scott Wood <scottwood@freescale.com>
22384 Date: Wed Aug 13 15:56:00 2008 -0500
22386 at91: Update board NAND drivers to current API.
22388 Signed-off-by: Scott Wood <scottwood@freescale.com>
22390 commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
22391 Author: Kyungmin Park <kmpark@infradead.org>
22392 Date: Wed Aug 13 09:11:02 2008 +0900
22394 Fix OneNAND build break
22396 Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
22397 - fix bufferram management at erase operation
22398 This patch includes the NAND/OneNAND state filed too.
22400 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
22401 Signed-off-by: Scott Wood <scottwood@freescale.com>
22403 commit 9483df6408c25f16060432de3868901e352e23bc
22404 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22405 Date: Wed Aug 13 01:40:43 2008 +0200
22407 drivers/mtd/nand_legacy: Move conditional compilation to Makefile
22409 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22411 commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
22412 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22413 Date: Wed Aug 13 01:40:43 2008 +0200
22415 drivers/mtd/nand: Move conditional compilation to Makefile
22417 rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
22419 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22421 commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
22422 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22423 Date: Wed Aug 13 01:40:42 2008 +0200
22425 drivers/mtd/onenand: Move conditional compilation to Makefile
22427 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22429 commit 00b1883a4cac59d97cd297b1a3a398db85982865
22430 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22431 Date: Wed Aug 13 01:40:42 2008 +0200
22433 drivers/mtd: Move conditional compilation to Makefile
22435 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
22437 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22439 commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
22440 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22441 Date: Wed Aug 13 01:40:41 2008 +0200
22443 drivers/qe: Move conditional compilation to Makefile
22445 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22447 commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
22448 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22449 Date: Wed Aug 13 01:40:40 2008 +0200
22451 drivers/pci: Move conditional compilation to Makefile
22453 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22455 commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
22456 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22457 Date: Wed Aug 13 01:40:40 2008 +0200
22459 drivers/misc: Move conditional compilation to Makefile
22461 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22463 commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
22464 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22465 Date: Wed Aug 13 01:40:40 2008 +0200
22467 drivers/input: Move conditional compilation to Makefile
22469 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22471 commit 88f57e093114a44aa9a858d52b099bcc52034a8c
22472 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22473 Date: Wed Aug 13 01:40:39 2008 +0200
22475 drivers/dma: Move conditional compilation to Makefile
22477 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22479 commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
22480 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22481 Date: Wed Aug 13 01:40:39 2008 +0200
22483 drivers/block: Move conditional compilation to Makefile
22485 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22487 commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
22488 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22489 Date: Wed Aug 13 01:40:39 2008 +0200
22491 serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
22493 move also conditional compilation to Makefile
22495 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22497 commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
22498 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22499 Date: Wed Aug 13 01:40:38 2008 +0200
22501 serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
22503 move also conditional compilation to Makefile
22505 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22507 commit d6e9ee92e890f67594ab150689510df361133ead
22508 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22509 Date: Wed Aug 13 01:40:38 2008 +0200
22511 common: Move conditional compilation to Makefile
22513 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22515 commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
22516 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22517 Date: Wed Aug 13 01:40:09 2008 +0200
22519 mx31: move freescale's mx31 boards to vendor board dir
22521 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22523 commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
22524 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22525 Date: Sat Jul 5 23:11:11 2008 +0200
22527 at91: move arch-at91sam9 to arch-at91
22529 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22531 commit 195ccfc5991d48764b2519941e3507f693851d5d
22532 Author: Fathi BOUDRA <fabo@debian.org>
22533 Date: Wed Aug 6 10:06:20 2008 +0200
22535 OneNAND: Fill in MTD function pointers for OneNAND.
22537 onenand_print_device_info():
22538 - Now returns a string to be placed in mtd->name,
22539 rather than calling printf.
22540 - Remove verbose parameter as it becomes useless.
22542 Signed-off-by: Fathi Boudra <fabo@debian.org>
22543 Signed-off-by: Scott Wood <scottwood@freescale.com>
22545 commit aa646643b6bc250cb3a4966bf728876e0c10d329
22546 Author: Guennadi Liakhovetski <lg@denx.de>
22547 Date: Wed Aug 6 21:42:07 2008 +0200
22549 nand_spl: Support page-aligned read in nand_load, use chipselect
22551 Supporting page-aligned reads doesn't incure any sinificant overhead, just
22552 a small change in the algorithm. Also replace in_8 with readb, since there
22555 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
22556 Signed-off-by: Scott Wood <scottwood@freescale.com>
22558 commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
22559 Author: Scott Wood <scottwood@freescale.com>
22560 Date: Tue Aug 5 11:15:59 2008 -0500
22562 NAND boot: Update large page support for current API.
22564 Also, remove the ctrl variable in favor of passing the constants
22565 directly, and remove redundant (u8) casts.
22567 Signed-off-by: Scott Wood <scottwood@freescale.com>
22569 commit e4c09508545d1c45617ba45391c03c03cbc360b9
22570 Author: Scott Wood <scottwood@freescale.com>
22571 Date: Mon Jun 30 14:13:28 2008 -0500
22573 NAND boot: MPC8313ERDB support
22575 Note that with older board revisions, NAND boot may only work after a
22576 power-on reset, and not after a warm reset. I don't have a newer board
22577 to test on; if you have a board with a 33MHz crystal, please let me know
22578 if it works after a warm reset.
22580 Signed-off-by: Scott Wood <scottwood@freescale.com>
22582 commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
22583 Author: Scott Wood <scottwood@freescale.com>
22584 Date: Thu Jun 26 14:06:52 2008 -0500
22586 mpc8313erdb: Enable NAND in config.
22588 Signed-off-by: Scott Wood <scottwood@freescale.com>
22590 commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
22591 Author: Guennadi Liakhovetski <lg@denx.de>
22592 Date: Thu Jul 31 12:38:26 2008 +0200
22594 NAND: Do not write or read a whole block if it is larger than the environment
22596 Environment can be smaller than NAND block size, do not need to read a whole
22597 block and minimum for writing is one page. Also remove an unused variable.
22599 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
22600 Signed-off-by: Scott Wood <scottwood@freescale.com>
22602 commit eafcabd15f00c142156235c519fcc55b10993241
22603 Author: Marcel Ziswiler <marcel@ziswiler.com>
22604 Date: Sun Jun 22 16:30:06 2008 +0200
22606 NAND: chip->state does not always get set.
22608 Fixes an issue with chip->state not always being set causing troubles.
22610 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
22611 Signed-off-by: Scott Wood <scottwood@freescale.com>
22613 commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
22614 Author: Ilya Yanok <yanok@emcraft.com>
22615 Date: Mon Jun 30 15:34:40 2008 +0200
22617 NAND: Scan bad blocks lazily.
22619 Rather than scanning on boot, scan upon the first attempt to check the
22620 badness of a block. This speeds up boot when not using NAND, and reduces
22621 the likelihood of needing to reflash via JTAG if NAND becomes
22624 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
22625 Signed-off-by: Scott Wood <scottwood@freescale.com>
22627 commit dfbf617ff055e4216f78d358b0867c548916d14b
22628 Author: Scott Wood <scottwood@freescale.com>
22629 Date: Thu Jun 12 13:20:16 2008 -0500
22631 NAND read/write fix
22633 Implement block-skipping read/write, based on a patch from
22634 Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
22636 Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
22637 Signed-off-by: Scott Wood <scottwood@freescale.com>
22639 commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
22640 Author: Scott Wood <scottwood@freescale.com>
22641 Date: Thu Jun 12 13:13:23 2008 -0500
22643 NAND: Always skip blocks on read/write/boot.
22645 Use of the non-skipping versions was almost always (if not always)
22646 an error, and no valid use case has been identified.
22648 Signed-off-by: Scott Wood <scottwood@freescale.com>
22650 commit e1c3dbada349992875934575c97b328ab2cb33ca
22651 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22652 Date: Thu Jun 12 11:10:21 2008 -0500
22654 nand: fsl_upm: convert to updated MTD NAND infrastructure
22656 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22657 Signed-off-by: Scott Wood <scottwood@freescale.com>
22659 commit 300253306acc72b1b2e9faf0987f86551151d7cf
22660 Author: Scott Wood <scottwood@freescale.com>
22661 Date: Thu May 22 15:02:46 2008 -0500
22663 fsl_elbc_nand: Hard-code the FBAR/FPAR split.
22665 The hardware has separate registers for block and page-within-block,
22666 but the division between the two has no apparent relation to the
22667 actual erase block size of the NAND chip.
22669 Signed-off-by: Scott Wood <scottwood@freescale.com>
22671 commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
22672 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22673 Date: Fri Mar 28 22:10:54 2008 +0300
22675 fsl_elbc_nand: workaround for hangs during nand write
22677 Using current driver elbc sometimes hangs during nand write. Reading back
22678 last byte helps though (thanks to Scott Wood for the idea).
22680 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
22681 Signed-off-by: Scott Wood <scottwood@freescale.com>
22683 commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
22684 Author: Scott Wood <scottwood@freescale.com>
22685 Date: Fri Mar 21 16:12:51 2008 -0500
22687 Freescale eLBC FCM NAND driver
22689 This is a driver for the Flash Control Machine of the enhanched Local Bus
22690 Controller found on some Freescale chips (such as the mpc8313 and the
22693 Signed-off-by: Scott Wood <scottwood@freescale.com>
22695 commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
22696 Author: Scott Wood <scottwood@freescale.com>
22697 Date: Tue Mar 18 15:29:14 2008 -0500
22699 Don't panic if a controller driver does ecc its own way.
22701 Some hardware, such as the enhanced local bus controller used on some
22702 mpc83xx chips, does ecc transparently when reading and writing data, rather
22703 than providing a generic calculate/correct mechanism that can be exported to
22704 the nand subsystem.
22706 The subsystem should not BUG() when calculate, correct, or hwctl are
22707 missing, if the methods that call them have been overridden.
22709 Signed-off-by: Scott Wood <scottwood@freescale.com>
22711 commit e52b34d40a8a646e3d11638ea8797e96398dba13
22712 Author: Stefan Roese <sr@denx.de>
22713 Date: Thu Jan 10 18:47:33 2008 +0100
22715 NAND: Make NAND driver less verbose per default
22717 This patch turns off printing of bad blocks per default upon bootup.
22718 This can always be shown via the "nand bad" command later.
22720 Signed-off-by: Stefan Roese <sr@denx.de>
22722 commit fe56a2772e5c59577df906163d0d4b29b056140e
22723 Author: Sergey Kubushyn <ksi@koi8.net>
22724 Date: Wed Jan 9 15:36:20 2008 +0100
22726 NAND: Davinci driver updates
22728 Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
22729 don't have hardware handy so I can not test it at the moment but changes are
22730 rather trivial so it should work. It would be nice if somebody with a
22731 hardware checked it anyways.
22733 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
22735 commit deac913effd8d80535c9ff4687b6fcdff540c554
22736 Author: Stefan Roese <sr@denx.de>
22737 Date: Sat Jan 5 16:50:32 2008 +0100
22739 NAND: Fix compilation warning and small coding style issue
22741 Signed-off-by: Stefan Roese <sr@denx.de>
22743 commit c568f77acdf896fc3dd6413ce53205b17ba809a3
22744 Author: Stefan Roese <sr@denx.de>
22745 Date: Sat Jan 5 16:49:37 2008 +0100
22747 NAND: Update nand_spl driver to match updated nand subsystem
22749 This patch changes the NAND booting driver nand_spl/nand_boot.c to match
22750 the new infrastructure from the updated NAND subsystem. This NAND
22751 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
22754 Signed-off-by: Stefan Roese <sr@denx.de>
22756 commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
22757 Author: Stefan Roese <sr@denx.de>
22758 Date: Sat Jan 5 16:47:58 2008 +0100
22760 NAND: Update 4xx NDFC driver to match updated nand subsystem
22762 This patch changes the 4xx NAND driver ndfc.c to match the new
22763 infrastructure from the updated NAND subsystem. This NAND
22764 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
22767 Tested successfully on AMCC Sequoia and Bamboo.
22769 Signed-off-by: Stefan Roese <sr@denx.de>
22771 commit 12072264528eba33737bc9674e19f0e925ffda23
22772 Author: Stefan Roese <sr@denx.de>
22773 Date: Sat Jan 5 16:43:25 2008 +0100
22775 NAND: Change nand_wait_ready() to not call nand_wait()
22777 This patch changes nand_wait_ready() to not just call nand_wait(),
22778 since this will send a new command to the NAND chip. We just want to
22779 wait for the chip to become ready here.
22781 Signed-off-by: Stefan Roese <sr@denx.de>
22783 commit 9ad754fef5053144daed3b007adaf1c9bec654c9
22784 Author: William Juul <william.juul@datarespons.no>
22785 Date: Fri Dec 14 16:33:45 2007 +0100
22787 make nand dump and nand dump.oob work
22789 Signed-off-by: William Juul <william.juul@tandberg.com>
22790 Signed-off-by: Scott Wood <scottwood@freescale.com>
22792 commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
22793 Author: William Juul <william.juul@datarespons.no>
22794 Date: Mon Nov 19 14:46:00 2007 +0100
22796 moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
22798 Signed-off-by: William Juul <william.juul@tandberg.com>
22800 commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
22801 Author: William Juul <william.juul@tandberg.com>
22802 Date: Tue Jun 10 16:18:13 2008 -0500
22804 Clean out unneeded files
22806 Signed-off-by: William Juul <william.juul@tandberg.com>
22808 commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
22809 Author: William Juul <william.juul@datarespons.no>
22810 Date: Fri Nov 16 08:44:27 2007 +0100
22812 Create symlinks from yaffs2/direct to yaffs2
22814 Signed-off-by: William Juul <william.juul@tandberg.com>
22816 commit 90ef117b68387d66763291af0117677644166611
22817 Author: William Juul <william.juul@datarespons.no>
22818 Date: Thu Nov 15 12:23:57 2007 +0100
22820 Incorporate yaffs2 into U-boot
22822 To use YAFFS2 define CONFIG_YAFFS2
22824 Signed-off-by: William Juul <william.juul@tandberg.com>
22825 Signed-off-by: Scott Wood <scottwood@freescale.com>
22827 commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
22828 Author: William Juul <william.juul@datarespons.no>
22829 Date: Thu Nov 15 11:13:05 2007 +0100
22833 Direct import of yaffs as a tarball as of 20071113 from their public
22834 CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
22836 The code can also be imported on the command line with:
22837 export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
22838 (Hit return when asked for a password)
22839 cvs checkout yaffs2
22841 Signed-off-by: William Juul <william.juul@tandberg.com>
22842 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
22844 commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
22845 Author: William Juul <william.juul@datarespons.no>
22846 Date: Wed Nov 14 14:28:11 2007 +0100
22848 Whitespace cleanup and marking broken code.
22850 Changes requested by maintainer Stefan Roese after
22851 posting patch to U-boot mailing list.
22853 Signed-off-by: William Juul <william.juul@tandberg.com>
22854 Signed-off-by: Scott Wood <scottwood@freescale.com>
22856 commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
22857 Author: William Juul <william.juul@datarespons.no>
22858 Date: Fri Nov 9 13:32:30 2007 +0100
22860 Fixing coding style issues
22862 - Fixing leading white spaces
22863 - Fixing indentation where 4 spaces are used instead of tab
22864 - Removing C++ comments (//), wherever I introduced them
22866 Signed-off-by: William Juul <william.juul@tandberg.com>
22867 Signed-off-by: Scott Wood <scottwood@freescale.com>
22869 commit 4cbb651b29cb64d378a06729970e1e153bb605b1
22870 Author: William Juul <william.juul@datarespons.no>
22871 Date: Thu Nov 8 10:39:53 2007 +0100
22873 Remove white space at end.
22875 Signed-off-by: William Juul <william.juul@tandberg.com>
22876 Signed-off-by: Scott Wood <scottwood@freescale.com>
22878 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
22879 Author: William Juul <william.juul@datarespons.no>
22880 Date: Wed Oct 31 13:53:06 2007 +0100
22882 Update MTD to that of Linux 2.6.22.1
22884 A lot changed in the Linux MTD code, since it was last ported from
22885 Linux to U-Boot. This patch takes U-Boot NAND support to the level
22886 of Linux 2.6.22.1 and will enable support for very large NAND devices
22887 (4KB pages) and ease the compatibility between U-Boot and Linux
22890 This patch is tested on two custom boards with PPC and ARM
22891 processors running YAFFS in U-Boot and Linux using gcc-4.1.2
22894 MAKEALL ppc/arm has some issues:
22895 * DOC/OneNand/nand_spl is not building (I have not tried porting
22896 these parts, and since I do not have any HW and I am not familiar
22897 with this code/HW I think its best left to someone else.)
22899 Except for the issues mentioned above, I have ported all drivers
22900 necessary to run MAKEALL ppc/arm without errors and warnings. Many
22901 drivers were trivial to port, but some were not so trivial. The
22902 following drivers must be examined carefully and maybe rewritten to
22905 cpu/arm926ejs/davinci/nand.c
22907 board/zylonite/nand.c
22909 Signed-off-by: William Juul <william.juul@tandberg.com>
22910 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
22911 Signed-off-by: Scott Wood <scottwood@freescale.com>
22913 commit cd82919e6c8a73b363a26f34b734923844e52d1c
22914 Author: Wolfgang Denk <wd@denx.de>
22915 Date: Tue Aug 12 16:08:38 2008 +0200
22917 Coding style cleanup, update CHANGELOG, prepare release
22919 Signed-off-by: Wolfgang Denk <wd@denx.de>
22921 commit 17e900b8c0f38d922da47073246219dce2a847f2
22922 Author: Wolfgang Denk <wd@denx.de>
22923 Date: Tue Aug 12 14:54:04 2008 +0200
22925 MVBC_P: fix compile problem
22927 Signed-off-by: Wolfgang Denk <wd@denx.de>
22929 commit 52b047ae48219b59bebe37ba743ab103fd4f8316
22930 Author: Wolfgang Denk <wd@denx.de>
22931 Date: Tue Aug 12 12:10:11 2008 +0200
22933 MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
22935 Signed-off-by: Wolfgang Denk <wd@denx.de>
22937 commit c9c101c660b3d1995045c61c7c6041f52b6cf335
22938 Author: Wolfgang Denk <wd@denx.de>
22939 Date: Tue Aug 12 00:36:53 2008 +0200
22941 ads5121: fix compiler warnings (unused variables)
22943 Signed-off-by: Wolfgang Denk <wd@denx.de>
22945 commit 902ca09246039964d59bbcb519b1e1b5aed01308
22946 Author: Kumar Gala <galak@kernel.crashing.org>
22947 Date: Mon Aug 11 11:29:28 2008 -0500
22949 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
22951 Use CONFIG_NUM_CPUS to match existing define used by 86xx.
22953 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22954 Acked-by: Jon Loeliger <jdl@freescale.com>
22956 commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
22957 Author: Kumar Gala <galak@kernel.crashing.org>
22958 Date: Mon Aug 11 09:20:53 2008 -0500
22960 Fix fallout from autostart revert
22962 The autostart revert caused a bit of duplicated code as well as
22963 code that was using images->autostart that needs to get removed so
22964 we can build again.
22966 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22968 commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
22969 Author: Kumar Gala <galak@kernel.crashing.org>
22970 Date: Mon Aug 11 09:16:25 2008 -0500
22972 Fix compile error related to r8a66597-hcd & usb
22974 When building the 8544DS board we get this error:
22976 In file included from r8a66597-hcd.c:22:
22977 u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
22978 make[1]: *** [r8a66597-hcd.o] Error 1
22980 The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
22983 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22985 commit 2d0daa03612338a813e3c9d22680e54eabfea378
22986 Author: Becky Bruce <becky.bruce@freescale.com>
22987 Date: Mon Aug 4 14:02:26 2008 -0500
22989 POWERPC 86xx: Move BAT setup code to C
22991 This is needed because we will be possibly be locating
22992 devices at physical addresses above 32bits, and the asm
22993 preprocessing does not appear to deal with ULL constants
22994 properly. We now call write_bat in lib_ppc/bat_rw.c.
22996 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22997 Acked-by: Jon Loeliger <jdl@freescale.com>
22999 commit 9de67149db576c91b9c2a0a182652331e7e44211
23000 Author: Becky Bruce <becky.bruce@freescale.com>
23001 Date: Mon Aug 4 14:01:53 2008 -0500
23003 POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
23005 Perform sync/isync as required by the architecture.
23007 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
23008 Acked-by: Jon Loeliger <jdl@freescale.com>
23010 commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
23011 Author: Becky Bruce <becky.bruce@freescale.com>
23012 Date: Mon Aug 4 14:01:16 2008 -0500
23014 POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
23016 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
23017 Acked-by: Jon Loeliger <jdl@freescale.com>
23019 commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
23020 Author: Magnus Lilja <lilja.magnus@gmail.com>
23021 Date: Sun Aug 3 21:44:10 2008 +0200
23023 i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
23025 Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
23026 contacts instead of only the first 256 ones as is the case prior to
23029 Add missing MUX_* macros and update board files to use the new macros.
23031 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
23033 commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
23034 Author: Magnus Lilja <lilja.magnus@gmail.com>
23035 Date: Sun Aug 3 21:43:37 2008 +0200
23037 i.MX31: Fix IOMUX related typos
23039 Correct the names of some IOMUX macros.
23041 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
23043 commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
23044 Author: Steve Sakoman <steve@sakoman.com>
23045 Date: Mon Aug 11 20:26:16 2008 +0200
23047 OneNAND: Remove unused parameters to onenand_verify_page
23049 The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
23051 Signed-off-by: Steve Sakoman <steve@sakoman.com>
23052 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
23054 commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
23055 Author: Anatolij Gustschin <agust@denx.de>
23056 Date: Fri Aug 8 18:00:40 2008 +0200
23058 video: fix bug in cfb_console code
23060 FILL_15BIT_555RGB macro extension for pixel swapping
23061 by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
23062 introduced a bug in cfb_console:
23064 Bitmaps with odd-numbered width won't be rendered
23065 correctly and even U-Boot crashes are observed on
23066 some platforms while repeated rendering of such
23067 bitmaps with "bmp display". Also if a bitmap is
23068 rendered to an odd-numbered x starting position,
23069 the same problem occurs. This patch is an attempt
23072 Signed-off-by: Anatolij Gustschin <agust@denx.de>
23074 commit d9015f6a50d7258125349ef5c2af836458a0029a
23075 Author: Anatolij Gustschin <agust@denx.de>
23076 Date: Fri Aug 8 18:00:39 2008 +0200
23078 video: fix bug in logo_plot
23080 If logo_plot() should ever be called with x starting
23081 position other than zero and for pixel depths greater
23082 than 8bpp, logo colors distortion will be observed.
23083 This patch fixes the issue.
23085 Signed-off-by: Anatolij Gustschin <agust@denx.de>
23087 commit 406819ae94f79f5b59e01d163380ca7d83709251
23088 Author: Wolfgang Denk <wd@denx.de>
23089 Date: Mon Aug 11 00:17:52 2008 +0200
23091 MAINTAINERS: sort entries
23093 Signed-off-by: Wolfgang Denk <wd@denx.de>
23095 commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
23096 Author: Roy Zang <tie-fei.zang@freescale.com>
23097 Date: Thu Aug 7 18:19:28 2008 +0800
23099 Add mpc7448hpc2 maintainer information
23101 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23103 commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
23104 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
23105 Date: Thu Aug 7 13:13:27 2008 +0530
23107 common/cmd_load.c - Minor code & Coding Style cleanup
23109 - os_data_header Variable is a carry over feature
23110 & unused. So removed all instance of this variable
23111 - Minor Code Style Update
23113 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
23114 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23116 commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
23117 Author: Magnus Lilja <lilja.magnus@gmail.com>
23118 Date: Wed Aug 6 19:32:33 2008 +0200
23120 Update the U-Boot wiki URL.
23122 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
23124 commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
23125 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
23126 Date: Sun Aug 10 17:56:36 2008 +0200
23128 OneNAND: Remove base address offset usage
23130 While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
23131 using OneNAND and some using NAND, we found some differences in OneNAND and
23132 NAND command address handling.
23134 As this might confuse users (it already confused us), we like to align OneNAND
23135 and NAND address handling.
23137 The issue is that cmd_onenand.c subtracts the onenand base address from the
23138 addresses you type into the u-boot command line so, unlike nand, you can't
23139 use addresses relative to the start of the onenand part e.g. this won't work:
23141 onenand read 82000000 280000 400000
23145 onenand read 82000000 20280000 400000
23147 Looking at recent git, the only board currently using OneNAND is Apollon, and
23148 for this the OneNAND base address is 0 (apollon.h)
23150 #define CFG_ONENAND_BASE 0x00000000
23152 so patch below won't break any existing boards and will align OneNAND and NAND
23153 handling on boards where OneNAND base address is != 0.
23155 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
23156 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
23157 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
23159 commit c11528083ef6e55e76df742228c26e39d151813d
23160 Author: Kumar Gala <galak@kernel.crashing.org>
23161 Date: Thu Aug 7 09:28:20 2008 -0500
23163 mpc85xx: workaround old binutils bug
23165 The recent change to move the .bss outside of the image gives older
23166 binutils (ld from eldk4.1/binutils-2.16) some headache:
23168 ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
23169 ppc_85xx-ld: final link failed: Bad value
23171 We workaround it by being explicit about the program headers and not
23172 assigning the .bss to a program header.
23174 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23176 commit 0bf202ec586d4466c900e987720fa635c594d689
23177 Author: Wolfgang Denk <wd@denx.de>
23178 Date: Sun Aug 10 01:26:26 2008 +0200
23180 Revert "[new uImage] Add autostart flag to bootm_headers structure"
23182 This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
23184 The commit was based on a misunderstanding of the (documented)
23185 meaning of the 'autostart' environment variable. It might cause
23186 boards to hang if 'autostart' was used, with the potential to brick
23187 them. Go back to the documented behaviour.
23195 Signed-off-by: Wolfgang Denk <wd@denx.de>
23197 commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
23198 Author: Wolfgang Denk <wd@denx.de>
23199 Date: Sat Aug 9 23:17:32 2008 +0200
23201 TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
23203 - enable CFI driver where this was forgotten
23204 - enable mtdparts support
23205 - adjust default environment
23208 Signed-off-by: Wolfgang Denk <wd@denx.de>
23210 commit 41266c9b5a5f873df3ec891bb0907616958b5602
23211 Author: Peter Tyser <ptyser@xes-inc.com>
23212 Date: Tue Aug 5 10:51:57 2008 -0500
23214 FIT: Fix handling of images without ramdisks
23216 boot_get_ramdisk() should not treat the case when a FIT image does
23217 not contain a ramdisk as an error.
23219 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
23220 Acked-by: Michal Simek <monstr@monstr.eu>
23222 commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
23223 Author: Sergey Lapin <slapin@ossfans.org>
23224 Date: Sat Aug 9 01:39:09 2008 +0400
23226 DataFlash: AT45DB021 fix and AT45DB081 support
23228 Fix for page size of AT45DB021. Also adding bigger AT45DB081
23229 which comes with some newer boards.
23231 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
23233 commit ba9324451b662dd393afa53e5cc36fc5d3d10966
23234 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
23235 Date: Fri Aug 8 16:30:23 2008 +0900
23237 sh: Update sh7763rdp config
23239 Add sh_eth support to sh7763rdp.
23241 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
23243 commit 21f971ec265f6042ec21636d55d06a6bc0751077
23244 Author: Wolfgang Denk <wd@denx.de>
23245 Date: Mon Jul 7 01:22:29 2008 +0200
23247 TQM823L: re-enable logo support; update LCD_INFO text
23249 Signed-off-by: Wolfgang Denk <wd@denx.de>
23251 commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
23252 Author: Wolfgang Denk <wd@denx.de>
23253 Date: Fri Aug 8 16:41:56 2008 +0200
23255 TQM8xxL: fix support for second flash bank
23257 When switching the TQM8xxL modules to use the CFI flash driver,
23258 support for the second flash bank was broken because the CFI driver
23259 did not support dynamically sized banks. This gets fixed now.
23261 Signed-off-by: Wolfgang Denk <wd@denx.de>
23263 commit 2a112b234d879f6390503a5f4e38246acce9d0b0
23264 Author: Wolfgang Denk <wd@denx.de>
23265 Date: Fri Aug 8 16:39:54 2008 +0200
23267 CFI: allow for dynamically determined flash sizes and addresses
23269 The CFI driver allowed only for static initializers in the
23270 CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
23271 several flash banks contiguously if the bank sizes were not known in
23272 advance, which kind of violates U-Boot's design philosophy.
23274 (will be used for example by the TQM8xxL boards)
23276 Signed-off-by: Wolfgang Denk <wd@denx.de>
23278 commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
23279 Author: Ben Warren <biggerbadderben@gmail.com>
23280 Date: Thu Aug 7 23:26:35 2008 -0700
23282 QE UEC: Fix compiler warnings
23284 Moved static functions earlier in file so forward declarations are not needed.
23286 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23288 commit d5d28fe4aad5f4535400647a5617c11039506467
23289 Author: David Saada <David.Saada@ecitele.com>
23290 Date: Mon Mar 31 02:37:38 2008 -0700
23292 QE UEC: Add MII Commands
23294 Add MII commands to the UEC driver. Note that once a UEC device is selected,
23295 any device on its MDIO bus can be addressed.
23297 Signed-off-by: David Saada <david.saada@ecitele.com>
23298 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23300 commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
23301 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
23302 Date: Wed Jul 9 21:07:38 2008 +0900
23304 usb: add support for R8A66597 usb controller
23306 add support for Renesas R8A66597 usb controller.
23307 This patch supports USB Host mode.
23309 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
23310 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23312 commit 1d10dcd041aaeae9fd7c821005692898a0303382
23313 Author: Hunter, Jon <jon-hunter@ti.com>
23314 Date: Sat Jul 26 18:59:16 2008 -0500
23316 Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
23318 Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
23320 Signed-off-by: Jon Hunter <jon-hunter@ti.com>
23321 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23323 commit eab1007334b93a6209f1ec33615e26ef5311ede7
23324 Author: Steven A. Falco <sfalco@harris.com>
23325 Date: Wed Aug 6 15:42:52 2008 -0400
23327 ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
23329 The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
23330 configuration to match the schematic, and also sets the SDR0_PFC1 register to
23331 select the corresponding mode for the UARTs.
23333 Signed-off-by: Steven A. Falco <sfalco@harris.com>
23334 Signed-off-by: Stefan Roese <sr@denx.de>
23336 commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
23337 Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
23338 Date: Wed Aug 6 14:42:13 2008 +0200
23340 avr32: add support for EarthLCD Favr-32 board
23342 This patch adds support for the Favr-32 board made by EarthLCD.
23344 This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
23345 has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
23346 Ethernet, audio out, USB device, SD-card slot, USART and various other
23347 connectors for cennecting stuff to SPI, I2C, GPIO, etc.
23349 Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
23350 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23352 commit bc9019e19758a19a388fb20ef18dc771cd39fdda
23353 Author: Rafael Campos <rafael.campos@hanscan.com>
23354 Date: Thu Jul 31 10:22:20 2008 +0200
23356 cfi-flash: Added support to flash_real_protect for Atmel flash devices
23358 Some of the flash memories produced by ATMEL start in read-only mode.
23359 We need to unprotect it. This patch allows the AT49BV6416 to work with
23360 cfi_flash memories. Tested in the at91rm9200ek board.
23362 Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
23363 Signed-off-by: Stefan Roese <sr@denx.de>
23365 commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
23366 Author: Guennadi Liakhovetski <lg@denx.de>
23367 Date: Tue Aug 5 15:36:39 2008 +0200
23369 cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
23371 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
23372 Signed-off-by: Stefan Roese <sr@denx.de>
23374 commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
23375 Author: Stefan Roese <sr@denx.de>
23376 Date: Wed Aug 6 14:06:03 2008 +0200
23380 Signed-off-by: Stefan Roese <sr@denx.de>
23382 commit f2302d4430e7f3f48308d6a585320fe96af8afbd
23383 Author: Stefan Roese <sr@denx.de>
23384 Date: Wed Aug 6 14:05:38 2008 +0200
23388 Signed-off-by: Stefan Roese <sr@denx.de>
23390 commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
23391 Author: Kenneth Johansson <kenneth@southpole.se>
23392 Date: Tue Jul 15 12:13:38 2008 +0200
23394 mpc5121: Move iopin features from board specific to common files.
23396 And in the process eliminate some duplicate register defines.
23398 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
23400 commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
23401 Author: John Rigby <jrigby@freescale.com>
23402 Date: Tue Aug 5 17:38:57 2008 -0600
23404 mpc5121: squash some fdt fixup errors
23406 On ADS5121 when booting linux the following errors are seen:
23407 Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
23408 Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
23409 Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
23411 This is caused by ft_cpu_setup trying to deal with
23412 both old and new soc node naming. This patch
23413 fixes this by being smarter about what to
23416 Also do soc node fixups by compatible instead of by path.
23417 A new board config called OF_SOC_COMPAT defined
23418 to be "fsl,mpc5121-immr" replaces the old
23419 OF_SOC node path that was defined to be "soc@80000000".
23421 Old device trees still work, but the compatiblity
23422 is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
23423 which is on by default in include/configs/ads5121.h.
23425 Signed-off-by: John Rigby <jrigby@freescale.com>
23427 commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
23428 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23429 Date: Sat Aug 2 23:48:30 2008 +0200
23431 drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
23433 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23435 commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
23436 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23437 Date: Sat Aug 2 23:48:32 2008 +0200
23439 nios2/sysid: fix printf warning
23441 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23443 commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
23444 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23445 Date: Sat Aug 2 23:48:33 2008 +0200
23447 Fix remaining build issues with MPC8xx FADS boards.
23449 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23451 commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
23452 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23453 Date: Sat Aug 2 23:48:31 2008 +0200
23455 nios2: fix phys_addr_t and phys_size_t support
23457 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23459 commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
23460 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23461 Date: Sat Aug 2 23:48:34 2008 +0200
23463 mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
23465 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23467 commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
23468 Author: Mark Jackson <mpfj@mimc.co.uk>
23469 Date: Fri Aug 1 09:48:29 2008 +0100
23471 Fix bitmap display for atmel lcd controller
23473 The current lcd_display_bitmap() function does not work properly
23474 for the Atmel LCD controller.
23476 2 fixes need to be done:-
23478 (a) when setting the colour map, use the lcd_setcolreg() function
23479 as provided by the Atmel driver
23480 (b) the data is never actually written to the lcd framebuffer !!
23482 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
23484 commit 2a433c66b1e2770349fe4911be23c375f053ebd8
23485 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23486 Date: Fri Aug 1 08:40:34 2008 +0200
23488 qemu_mips: update README to follow qemu update about default machine
23490 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23492 commit ac169d645f5f0e0b9a232563099209e92a355d8e
23493 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23494 Date: Thu Jul 31 19:53:21 2008 -0500
23496 ColdFire: Fix compilation issue caused by a missing function
23498 Implement usec2ticks() which is used by fsl_i2c.c in
23501 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23503 commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
23504 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23505 Date: Thu Jul 31 19:53:06 2008 -0500
23507 Fix compilation error for TASREG
23509 TASREG is ColdFire platform, the include ppc4xx.h in
23510 board/esd/common/flash.c causes conflict.
23512 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23514 commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
23515 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23516 Date: Thu Jul 31 19:52:36 2008 -0500
23518 Fix compilation error for MCF5275
23520 Rename OBJ to COBJ in board/platform/Makefile
23522 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23524 commit 5c40548f01218360a1f1395198c50ff45f3035b5
23525 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23526 Date: Thu Jul 31 19:52:28 2008 -0500
23528 Fix compile error caused by incorrect function return type
23530 Rename int mii_init(void) to void mii_init(void) for idmr
23533 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23535 commit a58c78067c928976c082c758d3987e89ead5b191
23536 Author: Wolfgang Denk <wd@denx.de>
23537 Date: Fri Aug 1 12:06:22 2008 +0200
23539 Fix build issues with MPC8xx FADS boards.
23541 Signed-off-by: Wolfgang Denk <wd@denx.de>
23543 commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
23544 Author: Wolfgang Denk <wd@denx.de>
23545 Date: Thu Jul 31 17:54:03 2008 +0200
23547 Prepare v1.3.4-rc2: update CHANGELOG
23549 Signed-off-by: Wolfgang Denk <wd@denx.de>
23551 commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
23552 Author: Mark Jackson <mpfj@mimc.co.uk>
23553 Date: Thu Jul 31 16:09:00 2008 +0100
23555 Add gzipped logo support
23557 The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
23559 If this option is set, additionally to standard BMP
23560 images, gzipped BMP images can be displayed via the
23561 splashscreen support or the bmp command.
23563 However, the splashscreen function *only* supports standard BMP images.
23565 This patch adds the documented gzip support.
23567 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
23569 commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
23570 Author: Mark Jackson <mpfj@mimc.co.uk>
23571 Date: Thu Jul 31 15:56:48 2008 +0100
23573 Fix Atmel LCD controller endianess for AVR32 processors
23575 The Atmel lcd controller is used on Atmel's AT91 (little endian) and
23576 AVR32 (big endian) platforms.
23578 As such, the controller can handle both big and little endian memory.
23580 This patch fixes the driver for the AVR32 platform.
23582 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
23584 commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
23585 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23586 Date: Thu Jul 31 15:56:01 2008 +0200
23588 apollon: fix build out of tree
23590 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23592 commit 2e752be39d3e398d4ab89ffa6634c397df298297
23593 Author: Guennadi Liakhovetski <lg@denx.de>
23594 Date: Thu Jul 31 12:35:04 2008 +0200
23596 Uncompressed images loaded to their start address shall set load_end too
23598 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
23599 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
23601 commit c37207d7f51e19c17f859966f314e27cc1231801
23602 Author: Wolfgang Denk <wd@denx.de>
23603 Date: Wed Jul 16 16:38:59 2008 +0200
23605 Fix printf() format problems with configurable prompts
23607 U-Boot allows for configurable prompt strings using the
23608 CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
23609 the assumption was that any such user defined problts would contain
23610 exactly one "%d" format specifier. But some boards did not.
23612 To allow for flexible boot prompts without adding too complex code we
23613 now allow to specify the whole list of printf() arguments in the user
23614 definition. This is powerful, but requires a responsible user who
23615 really understands what he is doing, as he needs to know for exanple
23616 which variables are available in the respective context.
23618 Signed-off-by: Wolfgang Denk <wd@denx.de>
23620 commit 54754120637b6a7f4ff774fb199fc550bcfea1da
23621 Author: Wolfgang Denk <wd@denx.de>
23622 Date: Thu Jul 31 17:02:14 2008 +0200
23624 TQM85xx: fix typo introduce by commit ffbb5cb9
23626 Signed-off-by: Wolfgang Denk <wd@denx.de>
23628 commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
23629 Author: Wolfgang Denk <wd@denx.de>
23630 Date: Thu Jul 31 15:27:01 2008 +0200
23632 mvbc_p board: fix most build warnings.
23634 Signed-off-by: Wolfgang Denk <wd@denx.de>
23636 commit c4ec6db074051d2f6fc76a66411c60621b22bc02
23637 Author: Wolfgang Denk <wd@denx.de>
23638 Date: Thu Jul 31 13:57:20 2008 +0200
23640 E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
23642 Avoid "integer constant is too large for 'long' type" warnings.
23643 And simplify the code.
23645 Signed-off-by: Wolfgang Denk <wd@denx.de>
23647 commit 9196b44334c330cc13de2464c59181e4db71f549
23648 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
23649 Date: Wed Jul 30 23:21:19 2008 +0400
23651 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
23653 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
23655 commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
23656 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
23657 Date: Wed Jul 30 23:20:32 2008 +0400
23659 PPC: Add pci_clk in the global_data for CPM2 processors
23661 This patch adds pci_clk field to the global_data structure for the
23662 processors which have CPM2 module in case the CONFIG_PCI is defined.
23664 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
23666 commit f0ff885ca64655bee6540eb8a25eed90b1152686
23667 Author: Kumar Gala <galak@kernel.crashing.org>
23668 Date: Wed Jul 30 14:13:30 2008 -0500
23670 mpc85xx: Update linker scripts for Freescale boards
23672 * Move to using absolute addressing always. Makes the scripts a bit more
23673 portable and common
23674 * Moved .bss after the end of the image. These allows us to have more
23675 room in the resulting binary image for code and data.
23676 * Removed .text object files that aren't really needed
23677 * Make sure _end is 4-byte aligned as the .bss init code expects this.
23678 (Its possible that the end of .bss isn't 4-byte aligned)
23680 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23682 commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
23683 Author: Kumar Gala <galak@kernel.crashing.org>
23684 Date: Wed Jul 30 08:01:15 2008 -0500
23686 Fix compile warnings in dlmalloc
23688 The origional code was using on odd reference to get to the first
23689 real element in av_[]. The first two elements of the array are
23690 not used for actual bins, but for house keeping. If we are more
23691 explicit about how use the first few elements we can get rid of the
23694 dlmalloc.c: In function 'malloc_extend_top':
23695 dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
23696 dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
23697 dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
23700 The logic of how this code came to be is:
23701 bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
23703 SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
23704 bin_at(0) = &(av_[0])
23706 Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
23708 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23710 commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
23711 Author: Stefan Roese <sr@denx.de>
23712 Date: Wed Jul 30 10:21:01 2008 +0200
23714 ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
23716 Signed-off-by: Stefan Roese <sr@denx.de>
23718 commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
23719 Author: Stefan Roese <sr@denx.de>
23720 Date: Wed Jul 30 09:59:51 2008 +0200
23722 cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
23724 A recent patch used '#if (CONFIG_CMD_USB)' instead of
23725 '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
23726 common/bootm.c compile again.
23728 Signed-off-by: Stefan Roese <sr@denx.de>
23729 Acked-by: Markus Klotzbuecher <mk@denx.de>
23731 commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
23732 Author: Kyungmin Park <kmpark@infradead.org>
23733 Date: Tue Jul 22 08:01:43 2008 +0900
23735 Remove unused I2C at apollon board
23737 There are no I2C devices on this board.
23739 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
23741 commit 3c95960e526b3b026da20201db64526f46faf14b
23742 Author: Wolfgang Denk <wd@denx.de>
23743 Date: Thu Jul 31 10:12:09 2008 +0200
23745 at91rm9200dk, csb637: fix NAND related build problems
23747 Tried fixing NAND support for the at91rm9200dk board; untested.
23748 Disabled NAND support in the csb637 board config file.
23750 Signed-off-by: Wolfgang Denk <wd@denx.de>
23752 commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
23753 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23754 Date: Wed Jul 30 12:39:28 2008 +0200
23756 ppc4xx: ML507: Environment in flash and MTD Support
23758 - Relocate the location of U-Boot in the flash
23759 - Save the environment in one sector of the flash memory
23762 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23763 Signed-off-by: Stefan Roese <sr@denx.de>
23765 commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
23766 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23767 Date: Tue Jul 29 17:16:10 2008 +0200
23769 ppc4xx: ML507: Use of get_ram_size in board ml507
23771 - Change suggested by WD
23773 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23774 Signed-off-by: Stefan Roese <sr@denx.de>
23776 commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
23777 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23778 Date: Mon Jul 21 20:30:07 2008 +0200
23780 ppc4xx: ML507: U-Boot in flash and System ACE
23782 This patch allows booting from FLASH the ML507 board by Xilinx.
23783 Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
23785 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23786 Signed-off-by: Stefan Roese <sr@denx.de>
23788 commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
23789 Author: Julien May <mailinglist@miromico.ch>
23790 Date: Mon Jun 23 13:57:52 2008 +0200
23792 Add support for the hammerhead (AVR32) board
23794 The Hammerhead platform is built around a AVR32 32-bit microcontroller
23795 from Atmel. It offers versatile peripherals, such as ethernet, usb
23796 device, usb host etc.
23798 The board also incooperates a power supply and is a Power over Ethernet
23799 (PoE) Powered Device (PD).
23801 Additonally, a Cyclone III FPGA from Altera is integrated on the board.
23802 The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
23803 DDR2 SDRAM interfaces, which will cover even the most exceptional need
23804 of memory bandwidth. Together with the onboard video decoder the board
23805 is ready for video processing.
23807 For more information see: http:///www.miromico.com/hammerhead
23809 Signed-off-by: Julien May <mailinglist@miromico.ch>
23810 [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
23811 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23813 commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
23814 Author: Kumar Gala <galak@kernel.crashing.org>
23815 Date: Tue Jul 29 12:23:49 2008 -0500
23817 fsl_i2c: Use timebase timer functions instead of get_timer()
23819 The current implementation of get_timer() is only really useful after we
23820 have relocated u-boot to memory. The i2c code is used before that as part
23821 of the SPD DDR setup.
23823 We actually have a bug when using the get_timer() code before relocation
23824 because the .bss hasn't been setup and thus we could be reading/writing
23825 a random location (probably in flash).
23827 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23829 commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
23830 Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
23831 Date: Tue Jul 29 14:49:31 2008 +0200
23833 Adder8xx: Fix CFG_MONITOR_LEN
23835 Due to increased space usage, U-Boot can no longer be stored in three sectors.
23836 The current U-Boot use just over three flash sectors (197k), and U-Boot will
23837 become corrupt after saving environment variables. This patch adds another 64k
23838 to CFG_MONITOR_LEN.
23840 Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
23842 commit a4c59ad4a21140550ada6f97690d2527c4146ce5
23843 Author: Kyungmin Park <kmpark@infradead.org>
23844 Date: Tue Jul 29 08:47:57 2008 +0900
23846 Add OneNAND IPL related files to gitignore
23848 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
23850 commit 8d87589e8e874df7120a3d9667f051bc33bac250
23851 Author: Rafal Jaworowski <raj@semihalf.com>
23852 Date: Mon Jul 28 20:38:25 2008 +0200
23854 API: Teach the storage layer about SATA and MMC options.
23856 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23857 Acked-by: Rafal Jaworowski <raj@semihalf.com>
23859 commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
23860 Author: Rafal Jaworowski <raj@semihalf.com>
23861 Date: Mon Jul 28 20:37:48 2008 +0200
23863 API: Dump contents of sector 0 in the demo application.
23865 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23866 Acked-by: Rafal Jaworowski <raj@semihalf.com>
23868 commit 13ca6305f2eba49c175f6370c35286141059c789
23869 Author: Rafal Jaworowski <raj@semihalf.com>
23870 Date: Mon Jul 28 20:37:10 2008 +0200
23872 API: Correct storage enumeration routine, other minor fixes in API storage area.
23874 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23875 Acked-by: Rafal Jaworowski <raj@semihalf.com>
23877 commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
23878 Author: Rafal Jaworowski <raj@semihalf.com>
23879 Date: Mon Jul 28 20:36:19 2008 +0200
23881 API: Fix compilation warnings in api_examples/demo.c.
23883 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23885 commit c14eefcc48212af2f3314809605698dd8393a90a
23886 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23887 Date: Sun Jul 27 17:09:43 2008 +0200
23889 Fix more printf() format warnings
23891 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23893 commit 936897d4d1365452bbbdf8430db5e7769ef08d38
23894 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23895 Date: Fri Jul 25 15:18:16 2008 +0200
23897 Fix remaining CFG_CMD_ define, ifdef and comments
23899 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23901 commit 5d1d00fb36005482e1803a00ddc46efa11d719af
23902 Author: Stefano Babic <sbabic@denx.de>
23903 Date: Fri Jul 25 08:57:40 2008 +0200
23905 Add include for config.h in command.h.
23907 Because the cmd_tbl_s structure depends on the configuration file, it
23908 must be assured that config.h is included before the structure is
23909 evaluated by the compiler. If this is not certain, it could happen
23910 that the compiler generates structures of different size, depending
23911 on the fact if the source file includes <config.h> before or after
23914 The effect is that u-boot crashes when tries to relocate the command
23915 table (for ppc) or try to access to the command table for other
23918 The problem can happen on board-depending commands. All general
23919 commands under /common are unaffected, because they include already
23920 config.h before command.h.
23922 Signed-off-by: Stefano Babic <sbabic@denx.de>
23924 commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
23925 Author: Scott Wood <scottwood@freescale.com>
23926 Date: Wed Jul 23 13:16:06 2008 -0500
23928 NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
23930 This fixes building out-of-tree.
23932 Signed-off-by: Scott Wood <scottwood@freescale.com>
23934 commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
23935 Author: Heiko Schocher <hs@denx.de>
23936 Date: Wed Jul 23 07:30:46 2008 +0200
23938 Fix warnings if compiling with IDE support.
23940 cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
23941 cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
23943 Signed-off-by: Heiko Schocher <hs@denx.de>
23945 commit 7610db17fd4d59c51d825488526d85ede2f06767
23946 Author: Adrian Filipi <adrian.filipi@eurotech.com>
23947 Date: Tue Jul 22 14:28:11 2008 -0400
23949 Removed support for the adsvix board.
23951 Support for the adsvix was originally provided by Applied Data
23952 Systems (ADS), inc., now EuroTech, Inc.
23953 The board never shipped aside from some sample boards.
23955 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
23957 commit f96b44cef897bd372beb86dde1b33637c119d84d
23958 Author: Remy Bohmer <linux@bohmer.net>
23959 Date: Tue Jul 22 16:22:11 2008 +0200
23961 ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
23963 If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
23964 never set, because relocation to RAM is actually never done by U-boot
23965 itself. However, several pieces of code check if this flag is set at
23968 So, to make sure this flag is set on boards skipping relocation, this
23969 is added to the initialisation of U-boot at a moment where it is safe
23972 Signed-off-by: Remy Bohmer <linux@bohmer.net>
23974 commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
23975 Author: Timur Tabi <timur@freescale.com>
23976 Date: Mon Jul 21 14:26:23 2008 -0500
23978 fsl-i2c: fix writes to data segment before relocation
23980 Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
23981 relocation. Commit d8c82db4 added the ability for i2c_init() to program the
23982 I2C bus speed and save the value in i2c_bus_speed[], which is a global
23983 variable. It is an error to write to the data segment before relocation,
23984 which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
23986 Signed-off-by: Timur Tabi <timur@freescale.com>
23988 commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
23989 Author: Wolfgang Ocker <weo@reccoware.de>
23990 Date: Mon Jul 28 16:56:51 2008 +0200
23992 mips: Fix baudrate divisor computation on alchemy cpus
23994 Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
23997 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
23998 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
24000 commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
24001 Author: Ben Warren <biggerbadderben@gmail.com>
24002 Date: Sat Jul 5 00:08:48 2008 -0700
24004 Moved initialization of AVR32 Ethernet controllers to board_eth_init()
24006 Renamed initialization functions for atngw100 and atstk1000.
24007 Removed initializations for these boards from net/eth.c
24009 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
24010 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24012 commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
24013 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24014 Date: Wed Jul 23 10:55:46 2008 +0200
24016 spi flash: Fix printf() format warnings
24018 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24020 commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
24021 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24022 Date: Wed Jul 23 10:55:31 2008 +0200
24024 atmel_mci: Fix printf() format warnings
24026 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24028 commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
24029 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24030 Date: Wed Jul 23 10:55:15 2008 +0200
24032 avr32: Fix printf() format warnings
24034 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24036 commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
24037 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24038 Date: Wed Jul 23 10:52:19 2008 +0200
24040 avr32: asm/io.h needs asm/types.h
24042 map_physmem() takes a phys_addr_t as parameter. This type is defined in
24043 asm/types.h, so we need to include that file.
24045 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24047 commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
24048 Author: Michal Simek <monstr@monstr.eu>
24049 Date: Thu Jul 17 12:25:46 2008 +0200
24051 microblaze: Fix printf() format issues
24053 Signed-off-by: Michal Simek <monstr@monstr.eu>
24055 commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
24056 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
24057 Date: Thu Jul 17 07:27:51 2008 +0530
24059 Remove unused code from lib_arm/bootm.c
24061 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
24063 commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
24064 Author: Detlev Zundel <dzu@denx.de>
24065 Date: Wed Jul 16 18:56:45 2008 +0200
24067 tqm85xx: Demystify 'DK: !!!' comment
24069 Signed-off-by: Detlev Zundel <dzu@denx.de>
24071 commit b2f44ba570f3a01113bbb745daf46f3858d22f53
24072 Author: Detlev Zundel <dzu@denx.de>
24073 Date: Wed Jul 16 18:56:44 2008 +0200
24075 83xx/85xx/86xx: Add LTEDR local bus definitions
24077 Signed-off-by: Detlev Zundel <dzu@denx.de>
24079 commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
24080 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
24081 Date: Wed Jul 16 16:22:32 2008 +0200
24083 serial_xuartlite.c: fix compiler warnings
24085 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
24086 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24088 commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
24089 Author: Stefan Roese <sr@denx.de>
24090 Date: Fri Jul 18 11:03:35 2008 +0200
24092 POST: Add disable interrupts in some of the missing CPU POST tests
24094 Some CPU POST tests did not disable the interrupts while running. This
24095 seems to be necessary to protect this self modifying code.
24097 Signed-off-by: Stefan Roese <sr@denx.de>
24099 commit 97a3bf268d096e0e97e54048448c35114edcf557
24100 Author: Stefan Roese <sr@denx.de>
24101 Date: Fri Jul 18 10:43:24 2008 +0200
24103 ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
24105 This is needed for boards that define CFG_64BIT_STRTOUL but don't define
24108 Signed-off-by: Stefan Roese <sr@denx.de>
24110 commit 0043ac55024963295fc79b39af85b6dc3b261e17
24111 Author: Niklaus Giger <niklaus.giger@netstal.com>
24112 Date: Fri Jul 18 11:22:23 2008 +0200
24114 POST PPC4xx/spr IVPR only if PPC440
24116 The SPR IVPR register is only present (as far as I know) for
24117 processors with a PPC440 core.
24119 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24120 Acked-by: Stefan Roese <sr@denx.de>
24122 commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
24123 Author: Stefan Roese <sr@denx.de>
24124 Date: Fri Jul 18 10:42:29 2008 +0200
24126 ppc4xx: Enable 64bit printf format on 440/460 platforms
24128 This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
24129 440/460 platforms. This may be needed since those platforms support
24130 36bit physical address space.
24132 Signed-off-by: Stefan Roese <sr@denx.de>
24134 commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
24135 Author: Stefan Roese <sr@denx.de>
24136 Date: Fri Jul 18 15:57:23 2008 +0200
24138 ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
24140 This patch fixes a problem with incorrect MODTx (On Die Termination)
24141 setup for a configuration with multiple DIMM's and multiple ranks.
24142 Without this change Katmai was unable to boot Linux with DDR2 frequency
24143 >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
24144 with DDR2 frequency = 640MHz and mem=4GB.
24146 Signed-off-by: Stefan Roese <sr@denx.de>
24148 commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
24149 Author: Stefan Roese <sr@denx.de>
24150 Date: Fri Jul 18 12:24:41 2008 +0200
24152 ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
24154 Signed-off-by: Stefan Roese <sr@denx.de>
24156 commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
24157 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
24158 Date: Thu Jul 17 12:47:09 2008 +0200
24160 ppc4xx: ML507 Board Support
24162 The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
24164 -Virtex 5 FX FPGA (With a ppc440x5 in it)
24169 -Serial ATA connectors
24170 -RS232 Level Conversors
24171 -Ethernet Transceiver
24173 This patch gives support to a standard design produced by EDK for this
24174 board: ppc440, uartlite, xilinx_int and flash
24176 - Includes Changes propossed by Stefan Roese and Michal Simek
24178 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
24179 Acked-by: Stefan Roese <sr@denx.de>
24181 commit d865fd09809a3a18669f35f970781820af40e4de
24182 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
24183 Date: Thu Jul 17 11:44:12 2008 +0200
24185 ppc4xx: CPU PPC440x5 on Virtex5 FX
24187 -This patchs gives support for the embbedded ppc440
24188 on the Virtex5 FPGAs
24189 -interrupts.c divided in uic.c and interrupts.c
24190 -xilinx_irq.c for xilinx interrupt controller
24191 -Include modifications propossed by Stefan Roese
24193 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
24194 Acked-by: Stefan Roese <sr@denx.de>
24196 commit 340ccb260f21516be360745d5c5e3bd0657698df
24197 Author: Sebastian Siewior <bigeasy@linutronix.de>
24198 Date: Wed Jul 16 20:04:49 2008 +0200
24200 cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
24202 This got broken by commits 93c56f212c
24203 [cfi_flash: support of long cmd in U-boot.]
24205 That command needs to be in little endian format on BE machines
24206 with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
24207 gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
24208 the cmdbuf in case portwidth = chipwidth = 8bit.
24210 Cc: Alexey Korolev <akorolev@infradead.org>
24211 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
24212 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
24214 commit 11188d55bc16dd907451c00282e00a038f73dd62
24215 Author: Stefan Roese <sr@denx.de>
24216 Date: Thu Jul 17 10:40:51 2008 +0200
24218 ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
24220 Signed-off-by: Stefan Roese <sr@denx.de>
24222 commit 021f6df6e96af5b387810cf96d24848da1faa55c
24223 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24224 Date: Thu Jul 10 17:20:51 2008 +0400
24226 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
24228 The thinko was quite silly indeed, I messed with !ptr. Normally this
24229 would trigger some fault, but in U-Boot NULL pointer is equal to phys
24230 0, so the code was working still, just didn't actually test mpc8315erdb
24231 environment variable value. Heh.
24233 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24234 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24236 commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
24237 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24238 Date: Tue Jul 8 21:00:04 2008 +0400
24240 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
24242 Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
24243 support, or without TSEC1 but with USB ULPI PHY support in addition.
24244 With this patch user can specify desired USB PHY.
24246 Also, it seems that we can't distinguish the two boards in software, so
24247 user have to set `mpc8315erdb' environment variable to either 'tsec1'
24248 (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
24249 Linux will not probe for TSEC1.
24251 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24252 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24254 commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
24255 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24256 Date: Tue Jul 8 20:59:43 2008 +0400
24258 fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
24260 Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
24261 MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
24262 (connected to the four-ports hub, usb host only).
24264 This patch implements support for passing Dual-Role USB controller's
24265 device tree property phy_type through the usb_phy_type environment
24268 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24269 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
24270 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24272 commit 699f05125509249072a0b865c8d35520d97cd501
24273 Author: Wolfgang Denk <wd@denx.de>
24274 Date: Tue Jul 15 22:22:44 2008 +0200
24276 Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
24278 Signed-off-by: Wolfgang Denk <wd@denx.de>
24280 commit bcab74baa6b1b1c969038ab6f64a186239180405
24281 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24282 Date: Tue Jul 15 11:23:02 2008 -0400
24284 Round the serial port clock divisor value returned by calc_divisor()
24286 Round the serial port clock divisor value returned by
24289 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24290 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
24292 commit 0328ef0edfe950f0b7b8b368dae482531506b74a
24293 Author: Robin Getz <rgetz@blackfin.uclinux.org>
24294 Date: Tue Jul 15 21:44:46 2008 +0200
24296 Fix DHCP protocol so U-Boot does not respond too early
24297 on the network with it's offered IP number; it should not reply until
24298 after it has received a DHCP ACK message. Also ensures that U-Boot
24299 does it's DHCPREQUEST as broadcast (per RFC 2131).
24301 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
24302 Acked-by: Ben Warren <biggerbadderben@gmail.com>
24303 Signed-off-by: Wolfgang Denk <wd@denx.de>
24305 commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
24306 Author: Sebastian Siewior <bigeasy@linutronix.de>
24307 Date: Tue Jul 15 13:35:23 2008 +0200
24309 cfi_flash: make the command u32 only
24311 This got changed by commit 93c56f212c
24312 [cfi_flash: support of long cmd in U-boot.]
24314 Long is the wrong type because it will behave differently on 64bit
24315 machines in a way that is probably not expected. u32 should be
24318 Cc: Alexey Korolev <akorolev@infradead.org>
24319 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
24320 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
24322 commit 31cfe57491b183acae575d486729e158f016c27b
24323 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24324 Date: Mon Jul 14 23:48:41 2008 +0200
24326 tools/gitignore: update to all generated files
24328 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24330 commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
24331 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
24332 Date: Wed Jul 9 18:30:44 2008 +0200
24334 mpc5xxx: Add MVBC_P board support
24336 The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
24337 controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
24339 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
24340 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24342 commit e2d31fb3450653115452144363d5bde4e5e3e693
24343 Author: Timur Tabi <timur@freescale.com>
24344 Date: Thu Jun 19 17:56:11 2008 -0500
24346 Update Freescale sys_eeprom.c to handle CCID formats
24348 Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
24349 NXID format replaces the older CCID format, but it's important to support both
24350 since most boards out there still use the CCID format. This change is in
24351 preparation for using one file to handle both formats. This will also unify
24352 EEPROM support for all Freescale 85xx and 86xx boards.
24354 Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
24355 instead of ID_EEPROM_ADDR.
24357 Signed-off-by: Timur Tabi <timur@freescale.com>
24359 commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
24360 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
24361 Date: Fri Jul 11 17:22:43 2008 +0900
24363 pci: sh: Add pci_skip_dev and pci_print_dev function
24365 Add function of new PCI, pci_skip_dev and pci_print_dev.
24367 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
24368 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24370 commit 1107014e835ec9d46c0333f4211d104f77442db0
24371 Author: Andy Fleming <afleming@freescale.com>
24372 Date: Mon Jul 14 20:29:07 2008 -0500
24374 Clean up INIT_RAM options
24376 The L2_INIT_RAM option was unused, and recent changes to the TLB code
24377 meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
24378 the amount of mapped space attached to nothing, we change things so the TLBs
24381 Signed-off-by: Andy Fleming <afleming@freescale.com>
24383 commit 4524561820a9327e89107854b3a7187800ccf719
24384 Author: Andy Fleming <afleming@freescale.com>
24385 Date: Mon Jul 14 20:26:57 2008 -0500
24387 Remove fake flash bank from 8544 DS
24389 The fake flash bank was generating errors for anyone who didn't have a
24390 PromJET hooked up to the board. As that constitutes the vast majority of
24391 users, we remove it.
24393 Signed-off-by: Andy Fleming <afleming@freescale.com>
24395 commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
24396 Author: Kumar Gala <galak@kernel.crashing.org>
24397 Date: Mon Jul 14 14:07:03 2008 -0500
24399 MPC8544DS: Add ATI Video card support
24401 Add support for using a PCIe ATI Video card on PCIe2.
24403 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24405 commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
24406 Author: Kumar Gala <galak@kernel.crashing.org>
24407 Date: Mon Jul 14 14:07:02 2008 -0500
24409 85xx: Add some L1/L2 SPR register definitions
24411 Add new L1/L2 SPRs related to e500mc cache config and control.
24413 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24415 commit e5852787f0c3c442a276262f13d91ca450605ac0
24416 Author: Kumar Gala <galak@kernel.crashing.org>
24417 Date: Mon Jul 14 14:07:01 2008 -0500
24419 MPC8544DS: Report board id, board version and fpga version.
24421 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24423 commit 73f15a060f67a2462551c334215bd20fac6b81d1
24424 Author: Kumar Gala <galak@kernel.crashing.org>
24425 Date: Mon Jul 14 14:07:00 2008 -0500
24427 85xx: Cleanup L2 cache size detection
24429 The L2 size detection code was a bit confusing and we kept having to add
24430 code to it to handle new processors. Change the sense of detection so we
24431 look for the older processors that aren't changing.
24433 Also added support for 1M cache size on 8572.
24435 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24437 commit c3ca7e5e00a24451f20df3bded9a61ba541921df
24438 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24439 Date: Fri Jul 11 15:33:08 2008 -0400
24441 sbc8560: enable CONFIG_OF_LIBFDT by default
24443 Make the default build for the sbc8560 board be powerpc
24444 capable with libfdt support.
24446 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24448 commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
24449 Author: Andy Fleming <afleming@freescale.com>
24450 Date: Mon Jul 14 20:04:40 2008 -0500
24452 Fix indentation for default boot environment variables
24454 This was proposed by Paul Gortmaker in response to Wolfgang's comments on
24455 similar #defines in sbc8560.h.
24457 Signed-off-by: Andy Fleming <afleming@freescale.com>
24459 commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
24460 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24461 Date: Fri Jul 11 15:33:07 2008 -0400
24463 sbc8560: add default fdt values
24465 Add in the default fdt settings and the typical EXTRA_ENV
24466 settings as borrowed from the mpc8560ads. Fix a couple
24467 of stale references to the mpc8560ads dating back to the
24468 original clone/fork.
24470 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24471 Signed-off-by: Andy Fleming <afleming@freescale.com>
24473 commit d04e76edf92f7f89696989e8702b97e020455af3
24474 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24475 Date: Fri Jul 11 15:33:06 2008 -0400
24477 sbc8560: add in ft_board_setup()
24479 Add in for the sbc8560, the ft_board_setup() routine, based on what is
24480 in use for the Freescale MPC8560ADS board.
24482 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24484 commit c158bcaca3b31cbe38c4143812e6170e38a57393
24485 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24486 Date: Fri Jul 11 15:33:05 2008 -0400
24488 sbc8560: define eth0 and eth1 instead of eth1 and eth2
24490 The existing config doesn't define CONFIG_HAS_ETH0, and so the
24491 fdt support doesn't update the zeros in the dtb local-mac with
24492 real data from the u-boot env. Since the existing config is
24493 tailored to just two interfaces, get rid of the ETH2 definitions
24496 Also don't include any end user specific data into the environment
24497 by default -- things like MAC address, network parameters etc. need
24498 to come from the end user.
24500 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24501 Signed-off-by: Andy Fleming <afleming@freescale.com>
24503 commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
24504 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24505 Date: Fri Jul 11 15:33:04 2008 -0400
24507 sbc8560: properly set cs0_bnds for 512MB
24509 The sbc8560 board ships with 512MB of memory installed,
24510 but the current cs0_bnds is hard coded for 256MB. Set the
24511 value based on CFG_SDRAM_SIZE.
24513 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24515 commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
24516 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24517 Date: Fri Jul 11 15:33:03 2008 -0400
24519 sbc8560: proper definitions for TSEC.
24521 The definitions for the TSEC have become out of date. There is no
24522 longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
24523 Update to match those of other boards, like the MPC8560ADS.
24525 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24526 Acked-by: Ben Warren <biggerbadderben@gmail.com>
24528 commit 71074abbe0c76429577aff58aeff0a24ad210b23
24529 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24530 Date: Wed Jul 9 13:23:05 2008 -0400
24532 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
24534 Some boards that have external 16550 UARTs don't have a direct
24535 tie between bi_busfreq and the clock used for the UARTs. Boards
24536 that do have such a tie should set CFG_NS16550_CLK to be
24537 get_bus_freq(0) -- which most of them do already.
24539 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24540 Acked-by: Kim Phillips <kim.phillips@freescale.com>
24542 commit 24ef76f320fbadf074105229826514db140f939f
24543 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
24544 Date: Wed Jul 2 07:03:53 2008 -0700
24546 Change the temp map to ROM to align addresses to page size.
24548 With a page size of BOOKE_PAGESZ_16M, both the real and effective
24549 addresses must be multiples of 16MB. The hardware silently truncates
24550 them so the code happens to work. This patch clarifies the situation
24551 by establishing addresses that the hardware doesn't need to truncate.
24553 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
24554 Signed-off-by: Andy Fleming <afleming@freescale.com>
24556 commit 06b4186c10204b6683edb047ac5f506fb0ce0937
24557 Author: Kim Phillips <kim.phillips@freescale.com>
24558 Date: Tue Jun 17 17:45:22 2008 -0500
24560 mpc85xx: use IS_E_PROCESSOR macro
24562 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24564 commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
24565 Author: Kim Phillips <kim.phillips@freescale.com>
24566 Date: Mon Jun 16 15:55:53 2008 -0500
24568 fdt: add crypto node handling for MPC8{3, 5}xxE processors
24570 Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
24571 check rev and up-rev crypto node (to SEC rev. 2.4 property values)
24572 if on an 'EA' processor, e.g. MPC8349EA.
24574 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24576 commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
24577 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24578 Date: Fri Jul 11 15:10:11 2008 -0400
24580 ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
24582 ARM DaVinci: Remove extern phy_t declaration by moving
24583 code to proper place.
24585 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24587 commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
24588 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24589 Date: Fri Jul 11 15:10:10 2008 -0400
24591 ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
24593 ARM DaVinci: Remove duplicate definitions of MACH_TYPE
24594 and prototype of i2c_init().
24596 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24598 commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
24599 Author: Kumar Gala <galak@kernel.crashing.org>
24600 Date: Mon Jul 14 14:03:02 2008 -0500
24602 Fix some more printf() format problems.
24604 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24606 commit 45b16d22c64674ccd8c4637456a987463609141c
24607 Author: Wolfgang Denk <wd@denx.de>
24608 Date: Mon Jul 14 22:38:42 2008 +0200
24610 Fix coding style; make code better parsable by external tools
24612 Signed-off-by: Wolfgang Denk <wd@denx.de>
24614 commit b880cbf207b1c109d3a661417a8feddcbd729a9d
24615 Author: Wolfgang Denk <wd@denx.de>
24616 Date: Mon Jul 14 21:19:08 2008 +0200
24618 cpu/i386/serial.c: Fix syntax errors
24620 Signed-off-by: Wolfgang Denk <wd@denx.de>
24622 commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
24623 Author: Wolfgang Denk <wd@denx.de>
24624 Date: Mon Jul 14 20:41:35 2008 +0200
24626 elppc board: Coding style cleanup.
24628 Signed-off-by: Wolfgang Denk <wd@denx.de>
24630 commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
24631 Author: Wolfgang Denk <wd@denx.de>
24632 Date: Mon Jul 14 20:40:22 2008 +0200
24634 elppc board: fix syntax error.
24636 Signed-off-by: Wolfgang Denk <wd@denx.de>
24638 commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
24639 Author: Wolfgang Denk <wd@denx.de>
24640 Date: Mon Jul 14 20:38:26 2008 +0200
24642 EB+MCF-EV123 board: fix coding style (alingment)
24644 Signed-off-by: Wolfgang Denk <wd@denx.de>
24646 commit 6841785a0bb0f38175456a923edd634fb7dd6947
24647 Author: Wolfgang Denk <wd@denx.de>
24648 Date: Mon Jul 14 20:36:44 2008 +0200
24650 EB+MCF-EV123 board: fix syntx error
24652 Signed-off-by: Wolfgang Denk <wd@denx.de>
24654 commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
24655 Author: Andy Fleming <afleming@freescale.com>
24656 Date: Mon Jul 7 18:02:08 2008 -0500
24658 Remove LBC_CACHE_BASE from 8544 DS
24660 The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
24661 space for some anyway, we were allowing speculative loads into unmapped space,
24662 which would cause an exception (annoying, even if ultimately harmless).
24663 Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
24666 Signed-off-by: Andy Fleming <afleming@freescale.com>
24668 commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
24669 Author: Wolfgang Denk <wd@denx.de>
24670 Date: Mon Jul 14 15:19:07 2008 +0200
24672 Code cleanup: fix old style assignment ambiguities like "=-" etc.
24674 Signed-off-by: Wolfgang Denk <wd@denx.de>
24676 commit d7854223c5c85b5849fbf422cc8ac0efef461c37
24677 Author: Wolfgang Denk <wd@denx.de>
24678 Date: Mon Jul 14 15:10:53 2008 +0200
24680 AmigaOneG3SE: remove dead and incomplete files
24682 Signed-off-by: Wolfgang Denk <wd@denx.de>
24684 commit b64f190b7a34224df09b559ca111eb1b733f00ad
24685 Author: Wolfgang Denk <wd@denx.de>
24686 Date: Mon Jul 14 15:06:35 2008 +0200
24688 Fix printf() format issues with sizeof_t types by using %zu
24690 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24691 Signed-off-by: Wolfgang Denk <wd@denx.de>
24693 commit f354b73e16a86f9e9085471a830605f74f84ea5d
24694 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24695 Date: Mon Jul 14 14:11:45 2008 +0200
24697 vsprintf: add z and t options
24699 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24701 commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
24702 Author: Wolfgang Denk <wd@denx.de>
24703 Date: Sun Jul 13 23:07:35 2008 +0200
24705 Fix some more printf() format issues.
24707 Signed-off-by: Wolfgang Denk <wd@denx.de>
24709 commit d5996dd555edf52721b7691a4c59de016251ed39
24710 Author: Wolfgang Denk <wd@denx.de>
24711 Date: Sun Jul 13 19:51:00 2008 +0200
24713 Fix some more printf() format problems.
24715 Signed-off-by: Wolfgang Denk <wd@denx.de>
24717 commit 0f9d5f6d6e814907794995c6a22af752040c35d9
24718 Author: Wolfgang Denk <wd@denx.de>
24719 Date: Sun Jul 13 19:48:26 2008 +0200
24721 ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
24723 Signed-off-by: Wolfgang Denk <wd@denx.de>
24725 commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
24726 Author: Anatolij Gustschin <agust@denx.de>
24727 Date: Sat Jul 12 17:31:36 2008 +0200
24729 Fix bug in Lime video driver
24731 We need to wait while drawing engine clears frame
24732 buffer before any further software accesses to frame
24733 buffer will be initiated. Otherwise software drawn
24734 parts could be partially destroyed by the drawing
24735 engine or even GDC chip freeze could occur (as
24736 observed on socrates board).
24738 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24740 commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
24741 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24742 Date: Sat Jul 12 14:36:34 2008 +0200
24744 Fix some more printf() format issues.
24746 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24748 commit 18c8a28aad49803780bd8d52432ded528e37e701
24749 Author: Michal Simek <monstr@monstr.eu>
24750 Date: Fri Jul 11 15:11:57 2008 +0200
24752 hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
24754 Signed-off-by: Michal Simek <monstr@monstr.eu>
24755 Acked-by: Stefan Roese <sr@denx.de>
24757 commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
24758 Author: Michal Simek <monstr@monstr.eu>
24759 Date: Fri Jul 11 11:50:53 2008 +0200
24761 hwmon: Cleaning hwmon devices
24764 Move device specific values to driver for better reading
24766 Signed-off-by: Michal Simek <monstr@monstr.eu>
24767 Acked-by: Stefan Roese <sr@denx.de>
24769 commit c78fce699c7ff467ecd841da6a79f065180bf578
24770 Author: Michal Simek <monstr@monstr.eu>
24771 Date: Fri Jul 11 10:43:13 2008 +0200
24773 FIS: repare incorrect return value with ramdisk handling
24775 Microblaze and PowerPC use boot_get_ramdisk for loading
24776 ramdisk to memory with checking return value.
24777 Return 0 means success. Return 1 means failed.
24778 Here is correspond part of code from bootm.c which check
24781 ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
24782 &rd_data_start, &rd_data_end);
24786 Signed-off-by: Michal Simek <monstr@monstr.eu>
24788 commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
24789 Author: Michal Simek <monstr@monstr.eu>
24790 Date: Fri Jul 11 10:10:32 2008 +0200
24792 microblaze: Remove useless ancient headers
24794 Signed-off-by: Michal Simek <monstr@monstr.eu>
24796 commit 53ea981c3124b13c137c2d10e975b7c6672266e0
24797 Author: Michal Simek <monstr@monstr.eu>
24798 Date: Fri Jul 11 10:10:31 2008 +0200
24800 microblaze: Clean uartlite driver
24802 Redesign uartlite driver to in_be32 and out_be32 macros
24803 Fix missing header in io.h
24805 Signed-off-by: Michal Simek <monstr@monstr.eu>
24806 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24808 commit dbf3dfb386a2d5d2381814e39985ab2e21894550
24809 Author: Marcel Ziswiler <marcel@ziswiler.com>
24810 Date: Fri Jul 11 02:39:14 2008 +0200
24812 Enable passing of ATAGs required by latest Linux kernel.
24814 commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
24815 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24816 Date: Fri Jul 11 10:24:15 2008 -0400
24818 Fix integer overflow warning in calc_divisor()
24820 which happened when rounding the serial port clock divisor
24822 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24824 commit 6b760189d77f001684e3160b355c185ca3804961
24825 Author: Marcel Ziswiler <marcel@ziswiler.com>
24826 Date: Fri Jul 11 01:09:59 2008 +0200
24828 Fix build time warnings in function mmc_decode_csd()
24830 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24832 commit c15947d6ce0d59925c97fdfac692476af6e262d0
24833 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24834 Date: Thu Jul 10 10:46:33 2008 -0400
24836 ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
24838 caused by missing dcache status/enable/disable functions.
24840 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24842 commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
24843 Author: Stefan Roese <sr@denx.de>
24844 Date: Thu Jul 10 13:53:31 2008 +0200
24846 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
24848 This patch removes some ft_board_setup() functions from some 4xx boards.
24849 This can be done since we now have a default weak implementation for this
24850 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
24851 implementation like canyonlands need their own version.
24853 Signed-off-by: Stefan Roese <sr@denx.de>
24855 commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
24856 Author: Wolfgang Denk <wd@denx.de>
24857 Date: Sun Jul 13 14:58:16 2008 +0200
24859 Add last known maintainer for orphaned boards; reformat.
24861 Signed-off-by: Wolfgang Denk <wd@denx.de>
24863 commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
24864 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24865 Date: Thu Jul 10 13:16:04 2008 +0200
24867 Remove kharris@nexus-tech.net from MAINTAINERS
24869 Mail to kharris@nexus-tech.net bounces because the user doesn't exist
24870 anymore. You can't be a maintainer without a valid e-mail address, so
24871 move all boards that used to be maintained by Kyle Harris to the
24874 Currently, only PowerPC has a list of orphaned boards, so this patch
24875 creates one for ARM as well.
24877 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24879 commit 17bd17071463b0cde391ac4a0863d600474b4ea1
24880 Author: Anatolij Gustschin <agust@denx.de>
24881 Date: Thu Jul 10 01:15:10 2008 +0200
24883 at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
24885 On the at91sam9260ep development board there is an EEPROM
24886 connected to the TWI interface (PA23, PA24 Peripheral A
24887 multiplexing), so we cannot use these pins as ETX2, ETX3.
24888 This patch configures PA10, PA11 pins for ETX2, ETX3
24889 instead of PA23, PA24 pins.
24891 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24892 Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
24894 commit f889265753ddf4465d9d580827bb9289bfac55d6
24895 Author: Kenneth Johansson <kenneth@southpole.se>
24896 Date: Sat Jul 12 13:18:34 2008 -0600
24898 fix DIU for small screens
24900 The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
24901 so it was not possible to set a slow pixel clock and thus prevented
24902 display on small screens.
24904 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
24905 Acked-by: John Rigby <jrigby@freescale.com>
24907 commit b60b8573875e650e4c69be667bfc88d3ed474a7c
24908 Author: John Rigby <jrigby@freescale.com>
24909 Date: Fri Jul 11 14:44:09 2008 -0600
24911 ADS5121 cleanup compile warnings
24913 board/ads5121/iopin.c
24914 Replace bit fields in struct iopin_t with a single
24915 field and intialize it via plain old macros.
24916 This fixes the type pun warnings and makes the code
24919 board/ads5121/ads5121.c
24920 Add include iopin.h to ads5121.c for the iopin_initialize
24923 Add an extern void ads5121_diu_init(void)
24925 Signed-off-by: John Rigby <jrigby@freescale.com>
24927 commit bde63587622c4b830a27d1ddf7265843de9e994f
24928 Author: Wolfgang Denk <wd@denx.de>
24929 Date: Fri Jul 11 22:56:11 2008 +0200
24931 Fix some more printf() format issues.
24933 Signed-off-by: Wolfgang Denk <wd@denx.de>
24935 commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
24936 Author: Wolfgang Denk <wd@denx.de>
24937 Date: Fri Jul 11 22:55:31 2008 +0200
24939 Fixed some out-of-tree build issues
24941 Signed-off-by: Wolfgang Denk <wd@denx.de>
24943 commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
24944 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24945 Date: Wed Jul 9 16:20:23 2008 -0500
24947 ColdFire: Fix FB CS not setup properly for Mcf5282
24949 Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
24950 CFG_CSn_RO is defined as 0, the chipselect will not
24953 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24955 commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
24956 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24957 Date: Wed Jul 9 15:47:27 2008 -0500
24959 ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
24961 Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
24962 clock module in cpu/<cf arch>/cpu_init.c
24964 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24966 commit f94945b517f10e01927101679c62361e03d4e837
24967 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24968 Date: Wed Jul 9 15:25:01 2008 -0500
24970 ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
24972 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24974 commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
24975 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24976 Date: Wed Jul 9 15:21:44 2008 -0500
24978 Fix compile error caused by missing timer function
24980 Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
24982 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24984 commit c37ea031175b807c54e6bad9b270e9bede6c0078
24985 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24986 Date: Wed Jul 9 15:14:25 2008 -0500
24988 Fix compile error caused by incorrect function return type
24990 Rename int mii_init(void) to void mii_init(void)
24992 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24994 commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
24995 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24996 Date: Wed Jun 18 19:27:23 2008 -0500
24998 ColdFire: Fix power up issue for MCF5235
25000 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25002 commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
25003 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25004 Date: Wed Jun 18 19:19:07 2008 -0500
25006 ColdFire: Fix compiling error for MCF5275
25008 The compiling error was caused by missing a closed parentheses
25011 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25013 commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
25014 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25015 Date: Wed Jun 18 19:14:01 2008 -0500
25017 ColdFire: Fix timer issue for MCF5272
25019 The timer was assigned to wrong timer memory mapped which
25020 caused udelay() and timer() not working properly.
25022 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25024 commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
25025 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25026 Date: Wed Jun 18 19:12:13 2008 -0500
25028 ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
25030 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
25032 commit 8371dc2066136be21e10b7b9293e469297d77298
25033 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25034 Date: Wed Jun 18 19:05:23 2008 -0500
25036 ColdFire: Add -got=single param for new linux v4e toolchains
25038 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
25040 commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
25041 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25042 Date: Wed Jun 18 13:21:19 2008 -0500
25044 ColdFire: Fix code flash configuration for M547x/M548x boards
25046 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
25048 commit 6e37091afc07fdcc15590093fd066b0cb7399f85
25049 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25050 Date: Tue Jun 24 12:12:16 2008 -0500
25052 ColdFire: Fix warning messages by passing correct data type in board.c
25054 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25056 commit 81cc32322acb1b3225ee45606ced48e2a14824dc
25057 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25058 Date: Thu May 29 12:21:54 2008 -0500
25060 ColdFire: Fix UART baudrate formula
25062 The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
25063 can generate the wrong divisor due to integer division truncation.
25064 Round the calculated divisor value by adding 1/2 the baudrate
25065 before dividing by the baudrate.
25067 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
25068 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
25070 commit b578fb471444cbd7db1285701ba51343baaf73fb
25071 Author: Stefan Roese <sr@denx.de>
25072 Date: Thu Jul 10 11:38:26 2008 +0200
25074 ppc4xx: Fix include sequence in 4xx_pcie.c
25076 This patch now moves common.h to the top of the inlcude list. This
25077 is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
25078 the phys_size_t/phys_addr_t are defined to the correct size in this
25081 Signed-off-by: Stefan Roese <sr@denx.de>
25083 commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
25084 Author: Stefan Roese <sr@denx.de>
25085 Date: Fri Jul 11 13:10:56 2008 +0200
25087 ppc4xx: Fix compile warning in 44x_spd_ddr2.c
25089 Signed-off-by: Stefan Roese <sr@denx.de>
25091 commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
25092 Author: Stefan Roese <sr@denx.de>
25093 Date: Fri Jul 11 11:40:13 2008 +0200
25095 ppc4xx: Fix small korat merge problem
25097 Signed-off-by: Stefan Roese <sr@denx.de>
25099 commit 1d0554736a0a1dd59718acda660871ce56b69e18
25100 Author: Stefan Roese <sr@denx.de>
25101 Date: Fri Jul 11 11:34:52 2008 +0200
25103 ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
25105 Signed-off-by: Stefan Roese <sr@denx.de>
25107 commit 3a82113ed5934d498f25080441a8261fc9454b15
25108 Author: Stefan Roese <sr@denx.de>
25109 Date: Thu Jul 10 16:37:09 2008 +0200
25111 ppc4xx: Add 460SX UIC defines
25113 Only the really needed ones are added (cascading and EMAC/MAL).
25115 Signed-off-by: Stefan Roese <sr@denx.de>
25117 commit 26173fc6f60521c2a8072f652f863617fc11ba9a
25118 Author: Stefan Roese <sr@denx.de>
25119 Date: Mon Jun 30 14:11:07 2008 +0200
25121 ppc4xx: Continue cleanup of ppc440.h
25123 This patch continues the ppc440.h cleanup by removing some of the unused
25126 Signed-off-by: Stefan Roese <sr@denx.de>
25128 commit d9056b7913ed6a228d2f33671d916efedee541dd
25129 Author: Stefan Roese <sr@denx.de>
25130 Date: Mon Jun 30 14:05:05 2008 +0200
25132 ppc4xx: Cleanup Katmai & Yucca PCIe register usage
25134 This patch cleans up the 440SPe PCIe register usage. Now only defines
25135 from the include/asm-ppc/4xx_pcie.h are used.
25137 Signed-off-by: Stefan Roese <sr@denx.de>
25139 commit 5de851403b01489b493fa83137ad990b8ce60d1c
25140 Author: Stefan Roese <sr@denx.de>
25141 Date: Thu Jun 26 17:36:39 2008 +0200
25143 ppc4xx: Rework 440GX UIC handling
25145 This patch reworks the 440GX interrupt handling so that the common 4xx
25146 code can be used. The 440GX is an exception to all other 4xx variants
25147 by having the cascading interrupt vectors not on UIC0 but on a special
25148 UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
25149 the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
25150 handling is simpler without any 440GX special cases.
25152 Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
25154 Signed-off-by: Stefan Roese <sr@denx.de>
25156 commit d1631fe1a05b063ccaf62ea892a8887b829847d1
25157 Author: Stefan Roese <sr@denx.de>
25158 Date: Thu Jun 26 13:40:57 2008 +0200
25160 ppc4xx: Consolidate PPC4xx UIC defines
25162 This 2nd patch now removes all UIC mask bit definition. They should be
25163 generated from the vectors by using the UIC_MASK() macro from now on.
25164 This way only the vectors need to get defined for new PPC's.
25166 Also only the really used interrupt vectors are now defined. This makes
25167 definitions for new PPC versions easier and less error prone.
25169 Another part of this patch is that the 4xx emac driver got a little
25170 cleanup, since now the usage of the interrupts is clearer.
25172 Signed-off-by: Stefan Roese <sr@denx.de>
25174 commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
25175 Author: Stefan Roese <sr@denx.de>
25176 Date: Wed Jun 25 10:59:22 2008 +0200
25178 ppc4xx: Consolidate PPC4xx UIC defines
25180 This patch is the first step to consolidate the UIC related defines in the
25181 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
25182 asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
25185 Signed-off-by: Stefan Roese <sr@denx.de>
25187 commit 7ee2619c20ccecd57966d74d844e6329e141261c
25188 Author: Stefan Roese <sr@denx.de>
25189 Date: Tue Jun 24 17:18:50 2008 +0200
25191 ppc4xx: Consolidate PPC4xx EBC defines
25193 This patch removes all EBC related defines from the PPC4xx headers
25194 ppc405.h and ppc440.h and introduces a new header
25196 include/asm-ppc/ppc4xx-ebc.h
25198 with all those defines.
25200 Signed-off-by: Stefan Roese <sr@denx.de>
25202 commit e321801bed5a6d896d298c00fd20046f039d5d66
25203 Author: Stefan Roese <sr@denx.de>
25204 Date: Thu Jul 10 13:52:44 2008 +0200
25206 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
25208 This patch removes some ft_board_setup() functions from some 4xx boards.
25209 This can be done since we now have a default weak implementation for this
25210 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
25211 implementation like canyonlands need their own version.
25213 Signed-off-by: Stefan Roese <sr@denx.de>
25215 commit 08250eb2edbd96514d049602d9e134110ac3185f
25216 Author: Stefan Roese <sr@denx.de>
25217 Date: Thu Jul 10 15:32:32 2008 +0200
25219 ppc4xx: Fix merge problems in 44x_spd_ddr2.c
25221 Signed-off-by: Stefan Roese <sr@denx.de>
25223 commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
25224 Author: Grant Erickson <gerickson@nuovations.com>
25225 Date: Tue Jul 8 08:35:00 2008 -0700
25227 ppc4xx: Add MII mode support to the EMAC RGMII Bridge
25229 This patch adds support for placing the RGMII bridge on the
25230 PPC405EX(r) into MII/GMII mode and allows a board-specific
25231 configuration to specify the bridge mode at compile-time.
25233 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
25234 Signed-off-by: Stefan Roese <sr@denx.de>
25236 commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
25237 Author: Grant Erickson <gerickson@nuovations.com>
25238 Date: Wed Jul 9 16:46:35 2008 -0700
25240 ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
25242 This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
25243 controller registers (MODT and INITPLR) used by the
25244 PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
25245 peer values used for the INITPLR MR and EMR registers,
25246 respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
25248 With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
25249 Kilauea are replaced by equivalent mnemonics to make it easier to
25250 compare and contrast other 405EX(r)-based boards (e.g. during board
25253 Finally, unified the SDRAM controller register dump routine such that
25254 it can be used across all processor variants that utilize the IBM DDR2
25255 SDRAM controller core. It produces output of the form:
25257 PPC4xx IBM DDR2 Register Dump:
25259 SDRAM_MB0CF[40] = 0x00006701
25262 which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
25263 since it is not uncommon that the DCR values in header files get mixed
25264 up and it helps to validate, at a glance, they match what is printed
25265 in the user manual.
25268 AMCC Kilauea/Haleakala:
25269 - NFS Linux Boot: PASSED
25270 - NAND Linux Boot: PASSED
25272 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
25273 Signed-off-by: Stefan Roese <sr@denx.de>
25275 commit ad7382d828982e9c1bafc4313ef1b666f6145f58
25276 Author: Grant Erickson <gerickson@nuovations.com>
25277 Date: Wed Jul 9 16:31:59 2008 -0700
25279 ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
25281 Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
25282 revision ID DCR based on 405EX, and add field mnemonics for bus error
25283 status and ECC error status registers.
25285 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
25286 Signed-off-by: Stefan Roese <sr@denx.de>
25288 commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
25289 Author: Grant Erickson <gerickson@nuovations.com>
25290 Date: Wed Jul 9 16:31:36 2008 -0700
25292 ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
25294 This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
25296 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
25297 Signed-off-by: Stefan Roese <sr@denx.de>
25299 commit 5b457d00730d4aa0c6450d21a9104723e606fb98
25300 Author: Grant Erickson <gerickson@nuovations.com>
25301 Date: Wed Jul 9 11:55:46 2008 -0700
25303 PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
25305 While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
25306 controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
25307 the 405EX(r), SDRAM_MCSTAT has a different DCR value.
25309 Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
25310 which causes SDRAM initialization to periodically fail since it can
25311 prematurely indicate SDRAM ready status.
25313 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
25314 Signed-off-by: Stefan Roese <sr@denx.de>
25316 commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
25317 Author: Feng Kan <fkan@amcc.com>
25318 Date: Tue Jul 8 22:48:42 2008 -0700
25320 ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
25322 Add AMCC Redwood reference board that uses the latest
25323 PPC 464 CPU processor combined with a rich mix of peripheral
25324 controllers. The board will support PCIe, mutiple Gig ethernet
25325 ports, advanced hardware RAID assistance and IEEE 1588.
25327 Signed-off-by: Feng Kan <fkan@amcc.com>
25328 Signed-off-by: Stefan Roese <sr@denx.de>
25330 commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
25331 Author: Feng Kan <fkan@amcc.com>
25332 Date: Tue Jul 8 22:48:07 2008 -0700
25334 ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
25336 Signed-off-by: Feng Kan <fkan@amcc.com>
25337 Signed-off-by: Stefan Roese <sr@denx.de>
25339 commit 7d30793685efcada183891c78fc892e6c9ba50c7
25340 Author: Feng Kan <fkan@amcc.com>
25341 Date: Tue Jul 8 22:47:31 2008 -0700
25343 ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
25345 Signed-off-by: Feng Kan <fkan@amcc.com>
25346 Signed-off-by: Stefan Roese <sr@denx.de>
25348 commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
25349 Author: Wolfgang Denk <wd@denx.de>
25350 Date: Fri Jul 11 01:16:00 2008 +0200
25352 Fix some more print() format errors.
25354 Signed-off-by: Wolfgang Denk <wd@denx.de>
25356 commit fdd70d1921b87287d9a99d1be99bc35226c2b412
25357 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25358 Date: Thu Jul 10 20:57:54 2008 +0200
25360 MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
25362 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25364 commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
25365 Author: Sergey Lapin <slapin@ossfans.org>
25366 Date: Thu Jun 5 11:06:29 2008 +0400
25368 DataFlash AT45DB021 support
25370 Some boards based on AT91SAM926X-EK use smaller DF chips to keep
25371 bootstrap, u-boot and its environment, using NAND or other external
25372 storage for kernel and rootfs. This patch adds support for
25373 small 1024x263 chip.
25375 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
25377 commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
25378 Author: Kim Phillips <kim.phillips@freescale.com>
25379 Date: Thu Jul 10 14:00:15 2008 -0500
25381 silence misc printf formatting compiler warnings
25383 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25385 commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
25386 Author: Markus Klotzbücher <mk@denx.de>
25387 Date: Thu Jul 10 14:47:09 2008 +0200
25389 USB: shutdown USB before booting
25391 This patch fixes a potentially serious issue related to USB which was
25392 discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
25393 ARM920T. Martin wrote:
25395 Turn off USB to prevent the host controller from writing to the
25396 SDRAM while Linux is booting. This could happen, because the HCCA
25397 (Host Controller Communication Area) lies within the SDRAM and the
25398 host controller writes continously to this area (as busmaster!), for
25399 example to increase the HccaFrameNumber variable, which happens
25402 This is a slightly modified version of the patch in order to shutdown
25403 USB when booting on all architectures.
25405 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25407 commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
25408 Author: Martha Marx <mmarx@silicontkx.com>
25409 Date: Thu May 29 14:23:25 2008 -0400
25411 Configuration changes for ADS5121 Rev 3
25413 ADS5121 Rev 3 board is now the default config
25415 config targets are now
25420 M41T62 on board RTC
25423 ads5121_rev2_config
25428 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
25429 Acked-by: Grant Likely <grant.likely@secretlab.ca>
25430 Acked-by: John Rigby <jrigby@freescale.com>
25432 commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
25433 Author: Martha Marx <mmarx@silicontkx.com>
25434 Date: Thu May 29 15:37:21 2008 -0400
25436 Consolidate ADS5121 IO Pin configuration
25438 Consolidate ADS5121 IO Pin configuration to one file
25439 board/ads5121/iopin.c.
25441 Remove pin config from cpu/mpc512x/fec.c
25443 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
25444 Acked-by: Grant Likely <grant.likely@secretlab.ca>
25445 Acked-by: John Rigby <jrigby@freescale.com>
25447 commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
25448 Author: Christian Eggers <christian@p2400.wgnetz.xx>
25449 Date: Fri Jun 27 19:46:51 2008 +0200
25451 Fix "usb part" command
25453 Only print partition for selected device if user supplied the <dev>
25454 arg with the "usb part [dev]" command.
25456 Signed-off-by: Christian Eggers <ceggers@gmx.de>
25457 Acked-by: Markus Klotzbuecher <mk@denx.de>
25459 commit cc83b27217f7380041fea386ddb6d6d9b261617d
25460 Author: Harald Welte <laforge@gnumonks.org>
25461 Date: Mon Jul 7 00:58:05 2008 +0800
25463 fix USB devices with multiple configurations
25465 This patch fixes bugs in usbdcore*.c related to the use of devices
25466 with multiple configurations.
25468 The original code made mistakes about the meaning of configuration value and
25469 configuration index, and the resulting off-by-one errors resulted in:
25471 * SET_CONFIGURATION always selected the first configuration, no matter what
25472 wValue is being passed.
25473 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
25474 configuration (index 0).
25476 Signed-off-by: Harald Welte <laforge@openmoko.org>
25477 Acked-by: Markus Klotzbuecher <mk@denx.de>
25479 commit 06c53beae1a726e707971c555613f09b270a2461
25480 Author: Wolfgang Denk <wd@denx.de>
25481 Date: Thu Jul 10 13:16:09 2008 +0200
25483 Fix some more print() format errors.
25485 Signed-off-by: Wolfgang Denk <wd@denx.de>
25487 commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
25488 Author: Christian Eggers <christian@p2400.wgnetz.xx>
25489 Date: Fri Jun 27 19:46:51 2008 +0200
25491 Fix "usb part" command
25493 Only print partition for selected device if user supplied the <dev>
25494 arg with the "usb part [dev]" command.
25496 Signed-off-by: Christian Eggers <ceggers@gmx.de>
25497 Acked-by: Markus Klotzbuecher <mk@denx.de>
25499 commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
25500 Author: Harald Welte <laforge@gnumonks.org>
25501 Date: Mon Jul 7 00:58:05 2008 +0800
25503 fix USB devices with multiple configurations
25505 This patch fixes bugs in usbdcore*.c related to the use of devices
25506 with multiple configurations.
25508 The original code made mistakes about the meaning of configuration value and
25509 configuration index, and the resulting off-by-one errors resulted in:
25511 * SET_CONFIGURATION always selected the first configuration, no matter what
25512 wValue is being passed.
25513 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
25514 configuration (index 0).
25516 Signed-off-by: Harald Welte <laforge@openmoko.org>
25517 Acked-by: Markus Klotzbuecher <mk@denx.de>
25519 commit e870690bdca154943ecadd5212d2d59c1b9d391b
25520 Author: Stefan Roese <sr@denx.de>
25521 Date: Thu Jul 10 10:10:54 2008 +0200
25523 MTD/NAND: Fix printf format warning in nand code
25525 This patch fixes NAND related printf format warning. Those warnings are
25526 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
25527 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
25530 Signed-off-by: Stefan Roese <sr@denx.de>
25532 commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
25533 Author: Stefan Roese <sr@denx.de>
25534 Date: Thu Jul 10 10:00:45 2008 +0200
25536 rtc: Fix printf format warning in m41t60.c
25538 Signed-off-by: Stefan Roese <sr@denx.de>
25540 commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
25541 Author: Stefan Roese <sr@denx.de>
25542 Date: Tue Jul 8 12:01:47 2008 +0200
25544 pci: Move PCI device configuration check into a separate weak function
25546 This patch moves the check, if a device should be skipped in PCI PNP
25547 configuration into the function pci_skip_dev(). This function is defined
25548 as weak so that it can be overwritten by a platform specific one if
25549 needed. The check if the device should get printed in the PCI summary upon
25550 bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
25551 pci_print_dev() which is also defined as weak too.
25553 Signed-off-by: Stefan Roese <sr@denx.de>
25555 commit b002144e1dc21374b1ef5281fe6b5d014af96650
25556 Author: Stefan Roese <sr@denx.de>
25557 Date: Thu Jul 10 09:58:06 2008 +0200
25559 ppc4xx: Fix printf format warnings now visible with the updated format check
25561 This patch fixes ppc4xx related printf format warning. Those warnings are
25562 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
25563 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
25566 Signed-off-by: Stefan Roese <sr@denx.de>
25568 commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
25569 Author: Stefan Roese <sr@denx.de>
25570 Date: Wed Jul 9 17:33:57 2008 +0200
25572 ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
25574 Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
25575 To support such configurations, we "only" map the first 2GB via the TLB's. We
25576 need some free virtual address space for the remaining peripherals like, SoC
25577 devices, FLASH etc.
25579 Note that ECC is currently not supported on configurations with more than 2GB
25580 SDRAM. This is because we only map the first 2GB on such systems, and therefore
25581 the ECC parity byte of the remaining area can't be written.
25583 Signed-off-by: Stefan Roese <sr@denx.de>
25585 commit cf1c2ed91df26903b956948f37f82de9e1158a89
25586 Author: Larry Johnson <lrj@acm.org>
25587 Date: Sat Jun 14 17:02:49 2008 -0400
25589 ppc4xx: Remove implementation of testdram() from Korat board support
25591 Signed-off-by: Larry Johnson <lrj@acm.org>
25592 Signed-off-by: Stefan Roese <sr@denx.de>
25594 commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
25595 Author: Larry Johnson <lrj@acm.org>
25596 Date: Sat Jun 14 16:53:02 2008 -0400
25598 ppc4xx: Update and add FDT to Korat board support
25600 Signed-off-by: Larry Johnson <lrj@acm.org>
25601 Signed-off-by: Stefan Roese <sr@denx.de>
25603 commit 4188f0491886b3b486164e819c0a83fdb97efd7d
25604 Author: Wolfgang Denk <wd@denx.de>
25605 Date: Thu Jul 10 01:13:30 2008 +0200
25607 Minor coding style cleanup; update CHANGELOG
25609 Signed-off-by: Wolfgang Denk <wd@denx.de>
25611 commit 8915f1189c1d29d8be7f4de325702d90a8988219
25612 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25613 Date: Wed Jul 9 17:50:45 2008 -0400
25615 e1000: add support for 82545GM 64bit PCI-X copper variant
25617 This PCI-X e1000 variant works by just adding in the correct
25618 PCI IDs in the appropriate places.
25620 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25622 commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
25623 Author: Daniel Hellstrom <daniel@gaisler.com>
25624 Date: Wed Jul 9 12:34:11 2008 +0000
25626 SPARC: Build error fix
25628 (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
25630 This patch makes SPARC targets build again. It is caused by
25631 phys_addr_t and phys_size_t being defined in the wrong header
25632 file. include/lmb.h need those typedefs to build.
25634 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
25636 commit 11ccc33fa21acce108f6b4a6936e3271af904c64
25637 Author: Marcel Ziswiler <marcel@ziswiler.com>
25638 Date: Wed Jul 9 08:17:15 2008 +0200
25640 Many spelling fixes in README.
25642 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25644 commit dbab0691d2533560f7e91b92ae844046a9ad1df3
25645 Author: Marcel Ziswiler <marcel@ziswiler.com>
25646 Date: Wed Jul 9 08:17:06 2008 +0200
25648 Minor spelling fix in comment.
25650 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25652 commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
25653 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25654 Date: Tue Jul 8 14:54:58 2008 -0400
25656 Round the serial port clock divisor value returned by calc_divisor()
25658 Round the serial port clock divisor value returned by
25661 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25662 Signed-off-by: John Roberts <john.roberts@pwav.com>
25664 commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
25665 Author: Scott Wood <scottwood@freescale.com>
25666 Date: Wed Jul 9 17:47:52 2008 -0500
25668 NAND: ifdef-protect most of nand.h when using legacy NAND.
25670 Some macros such as NAND_CTL_SETALE conflict between current and legacy
25671 NAND, being defined by the subsystem in the former case and the board
25672 config file in the latter.
25674 Signed-off-by: Scott Wood <scottwood@freescale.com>
25676 commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
25677 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25678 Date: Tue Jul 8 11:02:05 2008 -0400
25680 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
25682 ARM: Fix for incorrect version of patch applied when
25683 adding support for the Lyrtech SFF-SDR board.
25685 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25686 Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
25688 commit 47042b363ee5022b8180c65d3f4558e7972c79cd
25689 Author: Kyungmin Park <kmpark@infradead.org>
25690 Date: Tue Jul 8 09:08:40 2008 +0900
25692 Remove useless print message at apollon
25694 Remove useless print message at apollon
25696 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
25698 commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
25699 Author: Andy Fleming <afleming@freescale.com>
25700 Date: Mon Jul 7 14:24:39 2008 -0500
25702 Fix LMB type issues
25704 The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
25705 of casting problems in the bootm code that called the LMB functions.
25707 Signed-off-by: Andy Fleming <afleming@freescale.com>
25709 commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
25710 Author: Kumar Gala <galak@kernel.crashing.org>
25711 Date: Mon Jul 7 09:39:06 2008 -0500
25713 Fix compiler warnings
25715 gcc-4.3.x generates the following:
25717 bootm.c: In function 'do_bootm_linux':
25718 bootm.c:208: warning: cast from pointer to integer of different size
25719 bootm.c:215: warning: cast from pointer to integer of different size
25721 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25723 commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
25724 Author: Harald Welte <laforge@gnumonks.org>
25725 Date: Mon Jul 7 15:40:39 2008 +0800
25727 Remove code duplication for setting the default environment
25729 common/env_common.c (default_env): new function that resets the environment to
25731 common/env_common.c (env_relocate): use default_env instead of own copy
25732 common/env_nand.c (env_relocate_spec): use default_env instead of own copy
25733 include/environment.h: added default_env prototype
25735 Signed-off-by: Werner Almesberger <werner@openmoko.org>
25736 Signed-off-by: Harald Welte <laforge@openmoko.org>
25738 commit 99c2b434d37863df5dda5207a53760c6506fc2be
25739 Author: Marcel Ziswiler <marcel@ziswiler.com>
25740 Date: Sun Jun 22 16:13:46 2008 +0200
25742 NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
25744 The writeenv() and readenv() calls introduced by the recently added bad block
25745 management for environment variables were missing casts therefore producing
25746 compile time warnings.
25747 While at it fixing some typo in a comment and indentation.
25749 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
25750 Signed-off-by: Scott Wood <scottwood@freescale.com>
25752 commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
25753 Author: Scott Wood <scottwood@freescale.com>
25754 Date: Fri Jun 20 12:38:57 2008 -0500
25756 NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
25758 This is particularly problematic now that non-NAND-specific code is
25759 including <nand.h>, and thus all debugging code is being compiled
25760 regardless of whether it was requested, as reported by Scott McNutt
25761 <smcnutt@psyent.com>.
25763 Signed-off-by: Scott Wood <scottwood@freescale.com>
25765 commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
25766 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25767 Date: Thu Jun 12 19:27:58 2008 +0200
25769 mmc: Move atmel_mci driver into drivers/mmc
25771 This makes it easier to use the driver on other platforms.
25773 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25774 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25776 commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
25777 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25778 Date: Thu Jun 12 19:27:57 2008 +0200
25780 avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
25782 After we move the atmel_mci driver into drivers/mmc, we can't select
25783 it with CONFIG_MMC anymore. Introduce a new symbol specifically for
25784 this driver so that there's no ambiguity.
25786 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25787 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25789 commit 5ce13051a48c62bda9723df3b4778c492fb47f36
25790 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25791 Date: Thu Jun 12 19:27:56 2008 +0200
25793 Create drivers/mmc subdirectory
25795 In order to consolidate more of the various MMC drivers around the
25796 tree, we must first have a common place to put them.
25798 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25799 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25801 commit b502611b51f02718c2d1117d4981dabceb5af6de
25802 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
25803 Date: Sun Jul 6 12:30:09 2008 +0200
25805 Change env_get_char from a global function ptr to a function
25807 This avoids an early global data reference.
25809 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25811 commit 27269417ade432189b234d9fbac98b54e37b978c
25812 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
25813 Date: Sun Jul 6 13:57:58 2008 +0400
25815 Some copy-n-paste fixes in printf usage
25817 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
25819 commit 0e6989b9faf1588e8723535539e88a0df3c71356
25820 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
25821 Date: Sun Jul 6 13:57:00 2008 +0400
25823 FDT memory and pci node fixes for MPC8260ADS
25825 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
25827 commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
25828 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
25829 Date: Mon Jul 7 06:41:14 2008 -0700
25833 The compiler will help find mismatches between printf formats and
25834 arguments if you let it. This patch adds the necessary attributes to
25835 declarations in include/common.h, then begins to correct the resulting
25836 compiler warnings. Some of these were bugs, e.g., "$d" instead of
25837 "%d" and incorrect arguments. Others were just annoying, like
25838 int-long mismatches on a system where both are 32 bits. It's worth
25839 fixing the annoying errors to catch the real ones.
25841 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
25843 commit 417faf285b2527acb2de24c5cd3e2621d385408c
25844 Author: Becky Bruce <becky.bruce@freescale.com>
25845 Date: Wed Jul 9 11:09:41 2008 -0500
25847 Allow print_size to print in GB
25849 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
25851 commit e7c374529c87525c9aa463e0557c287887ae4e9e
25852 Author: Jason McMullan <mcmullan@netapp.com>
25853 Date: Sun Jun 8 23:56:00 2008 -0400
25855 mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
25857 Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
25858 they are set in the U-Boot environment.
25860 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
25861 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25863 commit 0192d7d56e9320819dea262f49789ae18fdd2c72
25864 Author: Stefan Roese <sr@denx.de>
25865 Date: Tue Jul 8 12:57:14 2008 +0200
25867 jedec_flash: Fix AM29DL800BB device ID
25869 As pointed out by Jerry Hicks, this patch corrects the device ID of
25870 the Spansion AM29DL800BB NOR device. Verified against latest Spansion
25871 datasheet (rev C4 from Dezember 2006).
25873 Signed-off-by: Stefan Roese <sr@denx.de>
25875 commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
25876 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25877 Date: Mon Jul 7 11:22:37 2008 +0900
25879 sh: Fix compile error sh7763rdp board
25881 Disable SH ether driver.
25883 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25885 commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
25886 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25887 Date: Tue Jul 8 12:03:24 2008 +0900
25889 sh: Fix SH-boards compile error
25891 By Cleanup out-or-tree building for some boards (.depend)
25892 (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
25893 because filse ware changed, some SH-boards have compile error.
25894 I revised this problem.
25896 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25898 commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
25899 Author: Jason Jin <Jason.jin@freescale.com>
25900 Date: Tue May 13 11:50:36 2008 +0800
25902 Feed the watchdog in u-boot for 8610 board.
25904 The watchdog on 8610 board is enabled by setting sw[6]
25905 to on. Once enabled, the watchdog can not be disabled
25906 by software. So feed the dog in u-boot is necessary for
25909 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
25911 commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
25912 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25913 Date: Wed Jun 18 12:10:33 2008 -0400
25915 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
25917 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
25919 Remove duplicate code in a if/else block in
25920 cpu/arm926ejs/davinci/lxt972.c.
25921 Fixed style issues.
25923 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25924 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25926 commit fec61431a003f5778bafa2624073a571af8bec9f
25927 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25928 Date: Wed Jun 18 12:10:31 2008 -0400
25930 Remove duplicate definitions in include/lxt971a.h.
25932 Remove duplicate definitions in include/lxt971a.h.
25934 Remove duplicate registers and bits definitions in
25935 include/lxt971a.h for standard MII registers, and
25936 use values in include/miiphy.h instead.
25938 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25939 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25941 commit 9751ee0990f467941da0b095a4e995f863672d7a
25942 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25943 Date: Wed Jun 11 21:05:00 2008 +0900
25945 net: sh: Renesas SH7763 Ethernet device support
25947 Renesas SH7763 has 2 channel Ethernet device.
25948 This is 10/100/1000 Base support.
25949 But this patch check 10/100 Base only.
25951 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25952 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25954 commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
25955 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25956 Date: Tue Jun 17 16:28:05 2008 +0900
25958 sh: Update Renesas R2DPlus board
25960 New NOR Flash board support and remove old type flash board config.
25961 And Remove network setting from config file.
25963 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25964 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25966 commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
25967 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25968 Date: Tue Jun 17 16:28:01 2008 +0900
25970 sh: Update Renesas R7780MP board
25972 New NOR Flash board support and remove network setting from config file.
25974 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25975 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25977 commit c001cd604e9f133743effbddb1c215b48e761c5a
25978 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25979 Date: Tue Jun 17 16:27:56 2008 +0900
25981 sh: Update Renesas Migo-R board
25983 Remove network setting from config file.
25985 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25986 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25988 commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
25989 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25990 Date: Tue Jun 17 16:27:52 2008 +0900
25992 sh: Update Hitachi MS7722SE board
25994 Remove network setting from config file.
25996 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25997 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25999 commit 26209e48e8791670c93108029a5c31a30016c6df
26000 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26001 Date: Tue Jun 17 16:27:48 2008 +0900
26003 sh: Cleanup source code of SH7763RDP
26005 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26006 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26008 commit 5cd5b2c96ef0025762931349d350287aec03ab47
26009 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26010 Date: Tue Jun 17 16:27:44 2008 +0900
26012 sh: Cleanup source code of R2DPlus
26014 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26015 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26017 commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
26018 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26019 Date: Tue Jun 17 16:27:41 2008 +0900
26021 sh: Cleanup source code of R7780MP
26023 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26024 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26026 commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
26027 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26028 Date: Tue Jun 17 16:27:38 2008 +0900
26030 sh: Cleanup source code of MS7722SE
26032 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26033 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26035 commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
26036 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26037 Date: Tue Jun 17 16:27:34 2008 +0900
26039 sh: Cleanup source code of MS7720SE
26041 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26042 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26044 commit 3ab4827cbe409488ebea1a2ee5094783f2672214
26045 Author: Wolfgang Denk <wd@denx.de>
26046 Date: Mon Jul 7 00:45:03 2008 +0200
26048 SH: fix out of tree building
26050 Signed-off-by: Wolfgang Denk <wd@denx.de>
26052 commit 9047bfa1e737d787be460387dd6f45737eeceb10
26053 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26054 Date: Thu Jul 3 23:16:06 2008 +0900
26056 net: smc911x: Fix typo
26058 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26060 commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
26061 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
26062 Date: Wed Jul 2 18:54:08 2008 +0200
26064 update mvBL-M7 board config
26066 update mvBL-M7 config file to use UBOOT_VERSION and define
26069 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
26071 commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
26072 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26073 Date: Mon Jun 30 17:45:01 2008 +0900
26075 net: fix compile problem in smc911x driver.
26077 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26078 Acked-by: Ben Warren <biggerbadderben@gmail.com>
26080 commit 9fea65a6c469b1b474b27446feb58738baba2d31
26081 Author: Michal Simek <monstr@monstr.eu>
26082 Date: Tue Jun 24 09:54:09 2008 +0200
26084 ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
26086 This change helps with better handling with others
26087 Xilinx based platform.
26089 Signed-off-by: Michal Simek <monstr@monstr.eu>
26090 Acked-by: Stefan Roese <sr@denx.de>
26092 commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
26093 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26094 Date: Tue Jun 17 13:07:11 2008 +0900
26096 net: ne2000: Move dev_addr variable from grobal to local.
26098 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26099 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26101 commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
26102 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26103 Date: Tue Jun 17 13:07:15 2008 +0900
26105 net: ne2000: Fix compile error of NE2000
26107 If enable DEBUG, can not compile ne2000 driver.
26109 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26110 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26112 commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
26113 Author: Ben Warren <biggerbadderben@gmail.com>
26114 Date: Mon Jun 23 22:57:27 2008 -0700
26116 Add mechanisms for CPU and board-specific Ethernet initialization
26118 This patch is the first step in cleaning up net/eth.c, by moving Ethernet
26119 initialization to CPU or board-specific code. Initial implementation is
26120 only on the Freescale TSEC controller, but others will be added soon.
26122 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26124 commit 7754f2be5d1835d263aad21b5a629526f3e680b0
26125 Author: Wolfgang Denk <wd@denx.de>
26126 Date: Sun Jul 6 01:21:46 2008 +0200
26128 include/sha256.h: fix file permissions.
26130 Signed-off-by: Wolfgang Denk <wd@denx.de>
26132 commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
26133 Author: Patrice Vilchez <patrice.vilchez@atmel.com>
26134 Date: Tue May 27 11:15:29 2008 +0200
26136 [AT91SAM9] Fix NAND FLASH timings
26138 Fix NAND FLASH timings for at91sam9x evaluation kits.
26140 New timings are based on application note
26141 "NAND Flash Support on AT91SAM9 Microcontrollers" available at
26142 http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
26144 Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
26145 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26146 Acked-by: Stelian Pop <stelian@popies.net>
26148 commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
26149 Author: Stelian Pop <stelian@popies.net>
26150 Date: Thu May 22 00:15:40 2008 +0200
26152 Fix boot from NOR due to incorrect reset delay.
26154 AT91 RSTC registers are battery-backuped, so their values
26155 are not reset across power cycles. One of those registers,
26156 the AT91_RSTC_MR register, is being modified by U-Boot, in
26157 the ethernet initialisation routine, to generate a 500ms
26160 Unfortunately, this value is not being restored afterwards,
26161 causing subsequent resets to also last for 500ms.
26163 This long reset sequence causes problems (at least) in the
26164 boot sequence from NOR: by the time the CPU tries to load
26165 a program from the NOR flash, the latter is still in reset
26166 and not yet available.
26168 Additionaly, this patch fixes a bug in the original code which
26169 caused the reset delay to last for 2s instead of 500ms.
26171 Signed-off-by: Stelian Pop <stelian@popies.net>
26172 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26174 commit f492dd636fbbae529e17533995bc6e5813c007f6
26175 Author: Wolfgang Denk <wd@denx.de>
26176 Date: Fri Jul 4 20:11:49 2008 +0200
26180 Signed-off-by: Wolfgang Denk <wd@denx.de>
26182 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
26183 Author: Wolfgang Denk <wd@denx.de>
26184 Date: Fri Jul 4 20:07:35 2008 +0200
26186 CCM/SCM boards: fix out of tree building
26188 Signed-off-by: Wolfgang Denk <wd@denx.de>
26190 commit ab4c3a490df9a964711556d2a05b0c787db45fde
26191 Author: Wolfgang Denk <wd@denx.de>
26192 Date: Thu Jul 3 23:22:27 2008 +0200
26194 SCM board: fix build errors.
26196 Signed-off-by: Wolfgang Denk <wd@denx.de>
26198 commit a566466f17ba0e2d2b6c250e77da678fb932470d
26199 Author: Wolfgang Denk <wd@denx.de>
26200 Date: Thu Jul 3 23:06:36 2008 +0200
26202 IAD210 board: fix ``"ALIGN" redefined'' warning.
26204 Signed-off-by: Wolfgang Denk <wd@denx.de>
26206 commit ad756314797c16fa5dca23e115aab881011f164f
26207 Author: Wolfgang Denk <wd@denx.de>
26208 Date: Thu Jul 3 23:00:24 2008 +0200
26210 CCM board: fix build errors.
26212 Signed-off-by: Wolfgang Denk <wd@denx.de>
26214 commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
26215 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
26216 Date: Wed Jul 2 18:54:08 2008 +0200
26218 update mvBL-M7 board config
26220 update mvBL-M7 config file to use UBOOT_VERSION.
26222 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
26223 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26225 commit ced209c50e80c25f13c083099b05044048d21f4f
26226 Author: Wolfgang Denk <wd@denx.de>
26227 Date: Thu Jul 3 22:39:21 2008 +0200
26229 sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
26231 Signed-off-by: Wolfgang Denk <wd@denx.de>
26233 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
26234 Author: Wolfgang Denk <wd@denx.de>
26235 Date: Thu Jul 3 22:34:08 2008 +0200
26237 Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
26239 Signed-off-by: Wolfgang Denk <wd@denx.de>
26241 commit 730f298485984b011b6ee8f4acb511cb45a843dd
26242 Author: Wolfgang Denk <wd@denx.de>
26243 Date: Thu Jul 3 22:04:17 2008 +0200
26245 lmb: fix "implicit declaration of function 'lmb_free'" warning
26247 Signed-off-by: Wolfgang Denk <wd@denx.de>
26249 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
26250 Author: Wolfgang Denk <wd@denx.de>
26251 Date: Wed Jul 2 23:53:23 2008 +0200
26253 Cleanup: remove redundant deleting on *~ files
26255 Signed-off-by: Wolfgang Denk <wd@denx.de>
26257 commit c8a3b109f07f02342d097b30908965f7261d9f15
26258 Author: Wolfgang Denk <wd@denx.de>
26259 Date: Wed Jul 2 23:49:18 2008 +0200
26261 Cleanup out-or-tree building for some boards (.depend)
26263 Signed-off-by: Wolfgang Denk <wd@denx.de>
26265 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
26266 Author: Wolfgang Denk <wd@denx.de>
26267 Date: Wed Jul 2 23:38:50 2008 +0200
26269 Cleanup: fix out-of-tree building for some boards
26271 Signed-off-by: Wolfgang Denk <wd@denx.de>
26273 commit 461fa68d20861811487944d22291db5a13410e20
26274 Author: Wolfgang Denk <wd@denx.de>
26275 Date: Wed Jul 2 23:00:14 2008 +0200
26277 Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
26279 Signed-off-by: Wolfgang Denk <wd@denx.de>
26281 commit 5981ebd32017e062b08aa6747cf591276f2db779
26282 Author: Detlev Zundel <dzu@denx.de>
26283 Date: Fri Jun 20 22:26:24 2008 +0200
26285 fdt: Fix typo in variable name.
26287 Signed-off-by: Detlev Zundel <dzu@denx.de>
26289 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
26290 Author: Gary Jennejohn <garyj@denx.de>
26291 Date: Thu Jun 19 11:11:19 2008 +0200
26293 Add logos for RRvision board
26295 Signed-off-by: Gary Jennejohn <garyj@denx.de>
26297 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
26298 Author: Esben Haabendal <EsbenHaabendal@gmail.com>
26299 Date: Wed Jun 18 11:03:57 2008 +0200
26301 mpc8260: add fdt_fixup_ethernet support
26303 Add support for updating mac-address and local-mac-address in fdt for
26304 all MPC8260 targets.
26306 Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
26308 commit f6a69559d64498a04e1e0b087a9b920e5775f866
26309 Author: Steven A. Falco <sfalco@harris.com>
26310 Date: Thu Jun 12 13:24:42 2008 -0400
26312 cmd_nvedit.c: clean up syntax highlighting
26314 My text-editor (vim) has a bit of trouble syntax-highlighting the
26315 cmd_nvedit.c file, because it apparently does not parse C
26316 ifdef/else/endif. The following patch does not change the behavior of
26317 the code at all, but does allow the editor to properly
26318 syntax-highlight the file.
26320 Signed-off-by: Steve Falco <sfalco@harris.com>
26322 commit 75678c807a6272ecc5541eb32898c93887f08400
26323 Author: Steven A. Falco <sfalco@harris.com>
26324 Date: Thu Jun 12 13:22:12 2008 -0400
26326 Make setenv() return status
26328 Currently, the setenv function does not return an error code.
26329 This patch allows to test for errors.
26331 Signed-off-by: Steve Falco <sfalco@harris.com>
26333 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
26334 Author: Kumar Gala <galak@kernel.crashing.org>
26335 Date: Wed Jun 11 10:14:06 2008 -0500
26337 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
26339 fls64, __ilog2_u64, ffs64 are variants that work on an u64,
26340 and fls is used to implement them.
26342 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26344 commit 83002a77cbdf383015ca384eff5fa31722d8e571
26345 Author: Magnus Lilja <lilja.magnus@gmail.com>
26346 Date: Mon Jun 9 22:58:48 2008 +0200
26348 i.MX31: Cleanup comments in lowlevel_init.S.
26350 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
26352 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
26353 Author: Ben Warren <biggerbadderben@gmail.com>
26354 Date: Sun Jun 8 23:28:33 2008 -0700
26356 Move conditional compilation of MPC8XXX SPI driver to Makefile
26358 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26360 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
26361 Author: Juergen Kilb <J.Kilb@gmx.de>
26362 Date: Sun Jun 8 17:59:53 2008 +0200
26364 i.MX31: fixed CTRL-C detection
26366 The Register URXD contains status information in bits [15..8].
26367 With status bit 15 set, CTRL-C was reported as 0x8003 instead
26368 of 0x03. Therefore CTRL-C was not detected.
26369 To solve this, bits [15..8] were masked out now.
26371 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
26372 Acked-by: Felix Radensky <felix@embedded-sol.com>
26374 commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
26375 Author: Stefan Roese <sr@denx.de>
26376 Date: Tue Jul 1 17:03:19 2008 +0200
26378 ppc4xx: Fix 460EX/GT PCIe port initialization
26380 This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
26381 configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
26384 Signed-off-by: Stefan Roese <sr@denx.de>
26386 commit b571afde0295b007a45055ee49f8822c753a5651
26387 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26388 Date: Sat Jun 7 12:29:52 2008 +0200
26392 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26393 Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
26395 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
26396 Author: Marian Balakowicz <m8@semihalf.com>
26397 Date: Fri Jun 6 23:07:40 2008 +0200
26399 Delay FIT format check on sector based devices
26401 Global FIT image operations like format check cannot be performed on
26402 a first sector data, defer them to the point when whole FIT image was
26403 uploaded to a system RAM.
26405 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
26406 Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
26407 NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
26409 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
26410 Author: Dave Liu <r63238@freescale.com>
26411 Date: Tue Jun 3 17:38:19 2008 +0800
26413 sata: wait for device updating signature to host
26415 The driver need wait for the device updating signature to host.
26416 If we don't wait for it, the driver can not detect the device(disk)
26417 when the system powers up.
26419 Signed-off-by: Dave Liu <daveliu@freescale.com>
26421 commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
26422 Author: Stefan Roese <sr@denx.de>
26423 Date: Sat Jun 28 14:56:17 2008 +0200
26425 ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
26427 This patch implements a fix provided by AMCC so that the lockup upon
26428 simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
26431 Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
26432 (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
26433 USB 2.0 host and SATA.
26435 This errata is not officially available yet. I'll update the comment
26436 to add the errata number later.
26438 Signed-off-by: Stefan Roese <sr@denx.de>
26440 commit 8b616edb118e37d05f6401389eaee1c636b22828
26441 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
26442 Date: Mon Jun 2 16:42:19 2008 -0400
26444 serial_pl010.c: add watchdog support
26446 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
26448 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
26449 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
26450 Date: Mon Jun 2 16:40:08 2008 -0400
26452 jffs2_1pass.c: add watchdog support
26454 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
26456 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
26457 Author: Sascha Laue <sascha.laue@liebherr.com>
26458 Date: Fri May 30 09:48:14 2008 +0200
26460 Configure DSP POST; add watchdog reset to diag command
26462 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
26464 commit f13526517859bf6b573e23ff47199e107d1009b5
26465 Author: Tor Krill <tor@excito.com>
26466 Date: Thu May 29 10:40:17 2008 +0200
26468 Add sata sil3114 support
26470 Signed-off-by: Tor Krill <tor@excito.com>
26472 commit e093a247628228100f405b6d7f6b1bfc16141938
26473 Author: Wolfgang Denk <wd@denx.de>
26474 Date: Sat Jun 28 23:34:37 2008 +0200
26476 Coding Style Cleanup
26478 Signed-off-by: Wolfgang Denk <wd@denx.de>
26480 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
26481 Author: Wolfgang Denk <wd@denx.de>
26482 Date: Sat Jun 28 23:16:01 2008 +0200
26486 Signed-off-by: Wolfgang Denk <wd@denx.de>
26488 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
26489 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
26490 Date: Wed May 21 13:58:41 2008 -0400
26492 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
26494 This patch adds support for the Lyrtech SFF-SDR board,
26495 based on the TI DaVinci architecture (ARM926EJS).
26497 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
26498 Signed-off-by: Philip Balister <philip@balister.org>
26499 Signed-off-by: Wolfgang Denk <wd@denx.de>
26501 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
26502 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26503 Date: Thu May 22 11:09:59 2008 +0200
26505 MMC: Consolidate MMC/SD command definitions
26507 This moves the MMC and SD Card command definitions from
26508 include/asm/arch/mmc.h into include/mmc.h. These definitions are
26509 given by the MMC and SD Card standards, not by any particular
26512 There's a lot more room for consolidation in the MMC drivers which
26513 I'm hoping to get done eventually, but this patch is a start.
26515 Compile-tested for all avr32 boards as well as lpc2292sodimm and
26516 lubbock. This should cover all three mmc drivers in the tree.
26518 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26520 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
26521 Author: Kyungmin Park <kmpark@infradead.org>
26522 Date: Wed May 21 14:38:08 2008 +0900
26524 Use better Ethernet timings for apollon board
26526 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
26528 commit 41c5eaa7253ed82bbae1eda5667755872c615164
26529 Author: Andy Fleming <afleming@freescale.com>
26530 Date: Mon Jun 16 13:58:56 2008 -0500
26532 Resize device tree to allow space for board changes and the chosen node
26534 Current code requires that a compiled device tree have space added to the end to
26535 leave room for extra nodes added by board code (and the chosen node). This
26536 requires that device tree creators anticipate how much space U-Boot will add to
26537 the tree, which is absurd. Ideally, the code would resize and/or relocate the
26538 tree when it needed more space, but this would require a systemic change to the
26539 fdt code, which is non-trivial. Instead, we resize the tree inside
26540 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
26541 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
26543 Signed-off-by: Andy Fleming <afleming@freescale.com>
26545 commit 7570a9941fc565922078679a72d246fe208d696d
26546 Author: Andy Fleming <afleming@freescale.com>
26547 Date: Mon Jun 16 13:58:55 2008 -0500
26549 Fix an underflow bug in __lmb_alloc_base
26551 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
26552 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
26553 merely updates __lmb_alloc_base to resemble the current version in Linux.
26555 Signed-off-by: Andy Fleming <afleming@freescale.com>
26557 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
26558 Author: Andy Fleming <afleming@freescale.com>
26559 Date: Mon Jun 16 13:58:54 2008 -0500
26563 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
26564 lmb_reserve to temporarily reserve some memory.
26566 Signed-off-by: Andy Fleming <afleming@freescale.com>
26568 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
26569 Author: Andy Fleming <afleming@freescale.com>
26570 Date: Mon Jun 16 13:58:53 2008 -0500
26574 ALIGN() returns the smallest aligned value greater than the passed
26575 in address or size. Taken from Linux.
26577 Signed-off-by: Andy Fleming <afleming@freescale.com>
26579 commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
26580 Author: Stefan Roese <sr@denx.de>
26581 Date: Tue Jun 24 17:15:22 2008 +0200
26583 ppc4xx: Fix compilation problems with phys_size_t
26585 This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
26586 board specific files where it has been missing.
26588 Signed-off-by: Stefan Roese <sr@denx.de>
26590 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
26591 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26592 Date: Mon May 19 12:26:38 2008 +0200
26594 Conditionally add -fno-stack-protector to CFLAGS
26596 When compile-testing on powerpc, I get errors like this:
26598 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
26600 This seems to be because -fstack-protector is on by default, so
26601 let's explicitly disable it on all architectures that support the
26604 The Ubuntu toolchain is affected by this problem, and according to
26605 Mike Frysinger, Gentoo has been running with SSP enabled for years.
26606 More and more distros are turning SSP on by default, so this problem
26607 is likely to get worse in the future.
26609 Also, powerpc just happens to be one of the arches I do
26610 compile-testing on. There may be other arches affected by this too.
26612 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26614 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
26615 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26616 Date: Sun May 18 19:09:52 2008 +0200
26618 pcmcia/ti_pci1410a: Move compile condition to the Makefile
26620 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26622 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
26623 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26624 Date: Sun May 18 19:09:51 2008 +0200
26626 pxa_pcmcia: Move compile condition to the Makefile
26628 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26630 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
26631 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26632 Date: Sun May 18 19:09:50 2008 +0200
26634 marabun_pcmcia: Move compile condition to the Makefile
26636 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26638 commit 6a19c46cae43c16c528eddefae3db97134f1915d
26639 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
26640 Date: Mon Jun 23 13:25:34 2008 +0200
26642 fix non-working mvBL-M7
26644 Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
26646 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
26647 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26649 commit 846f1574ddddeda2bc227655e687308695f41cdc
26650 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
26651 Date: Mon Jun 23 11:40:56 2008 +0200
26653 fix system config overwrite @ MPC834x and MPC8313
26655 During 83xx setup the "System I/O configuration register high" gets
26656 overwritten with user defined value if CFG_SICRH is defined.
26658 Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
26659 must keep their reset value regardless of configuration.
26661 On my board (using RGMII) those bits are set after reset - yet it's
26662 unclear where they come from.
26664 The patch keeps both bits on MPC834x and MPC8313.
26666 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
26667 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26669 commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
26670 Author: Kim Phillips <kim.phillips@freescale.com>
26671 Date: Tue Jun 17 17:45:27 2008 -0500
26673 mpc83xx: move CPU_TYPE_ENTRY over to processor.h
26677 cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
26678 In file included from cpu.c:33:
26679 /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
26681 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26683 commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
26684 Author: Stefan Roese <sr@denx.de>
26685 Date: Mon Jun 23 11:15:09 2008 +0200
26687 ppc4xx: Fix problem in gpio_config()
26689 As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
26690 left by one. So the additional shift is bogus.
26692 Signed-off-by: Stefan Roese <sr@denx.de>
26694 commit 40777812316fc252c941665c0f60c148fd79d50f
26695 Author: Detlev Zundel <dzu@denx.de>
26696 Date: Fri Jun 20 22:24:05 2008 +0200
26698 fdt: Fix typo in variable name.
26700 Signed-off-by: Detlev Zundel <dzu@denx.de>
26702 commit 5f723a3b98c630bde33de74351f2121691fdef14
26703 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26704 Date: Fri Jun 20 10:41:05 2008 +0200
26706 avr32: Enable SPI flash support on ATNGW100
26708 The ATNGW100 has 8MB DataFlash on board. Give users access to it through
26709 the new SPI flash framework.
26711 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26713 commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
26714 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26715 Date: Fri Jun 20 12:44:28 2008 +0200
26717 avr32: Fix SPI portmux initialization
26719 Use the new GPIO manipulation functions to set up the chip select lines,
26720 and make sure both busses use GPIO for chip select control.
26722 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26724 commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
26725 Author: Peter Ma <pma@mediamatech.com>
26726 Date: Sun Jun 1 22:59:24 2008 -0700
26728 avr32: Add GPIO manipulation functions
26730 Adds GPIO manipulation functions for AVR32 AP7 platform.
26732 Signed-off-by: Peter Ma <pma@mediamatech.com>
26733 [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
26734 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
26736 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
26737 Author: Wolfgang Grandegger <wg@grandegger.com>
26738 Date: Thu Jun 5 13:02:30 2008 +0200
26740 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
26742 This patch is based on the following patch sent a few minutes ago:
26743 "NAND FSL UPM: driver re-write using the hwcontrol callback"
26744 It is untested, of course. Anton, could you please give it a try.
26746 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26747 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26749 commit 96026d42fa4e646d28318c0a1438aac4b2017909
26750 Author: Anatolij Gustschin <agust@denx.de>
26751 Date: Thu Jun 12 12:40:11 2008 +0200
26753 Fix 4xx build issue
26755 Building for 4xx doesn't work since commit 4dbdb768:
26757 In file included from 4xx_pcie.c:28:
26758 include/asm/processor.h:971: error: expected ')' before 'ver'
26759 make[1]: *** [4xx_pcie.o] Error 1
26761 This patch fixes the problem.
26763 Signed-off-by: Anatolij Gustschin <agust@denx.de>
26764 Acked-by: Stefan Roese <sr@denx.de>
26765 Acked-by: Kumar Gala <galak@kernel.crashing.org>
26767 commit a036b0443657fe0f4773786de9092251869f08ac
26768 Author: Kumar Gala <galak@kernel.crashing.org>
26769 Date: Thu Jun 19 01:45:50 2008 -0500
26771 MPC8610HPCD: Report board id, board version and fpga version.
26773 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26775 commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
26776 Author: Kumar Gala <galak@kernel.crashing.org>
26777 Date: Thu Jun 19 01:45:27 2008 -0500
26779 MPC8641HPCN: Report board id, board version and fpga version.
26781 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26783 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
26784 Author: Stefan Roese <sr@denx.de>
26785 Date: Mon Jun 16 10:40:02 2008 +0200
26787 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
26789 This patch simplifies flash_toggle() (AMD commandset), which is used to
26790 detect if a FLASH device is still busy with erase/program operations. On
26791 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
26792 did not detect the busy state reliably, resulting in non erased sectors
26793 etc. This patch now simplifies this function by "just" comparing the
26794 complete data-word instead of ANDing it with the command-word (0x40)
26795 before the compatison. It is done the same way in the Linux implementation
26796 chip_ready() in cfi_cmdset_0002.c.
26798 Signed-off-by: Stefan Roese <sr@denx.de>
26800 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
26801 Author: Philip Balister <philip@balister.org>
26802 Date: Mon Jun 16 08:58:07 2008 -0400
26804 NAND: Add missing declaration to non-redundant saveenv().
26806 Signed-off-by: Scott Wood <scottwood@freescale.com>
26808 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
26809 Author: Wolfgang Grandegger <wg@grandegger.com>
26810 Date: Mon Jun 2 15:09:55 2008 +0200
26812 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
26814 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26815 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26816 Signed-off-by: Scott Wood <scottwood@freescale.com>
26818 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
26819 Author: Stefan Roese <sr@denx.de>
26820 Date: Tue Jun 10 15:34:11 2008 +0200
26822 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
26824 This patch disables the square wave output of the M41T62 RTC used on
26825 Canyonlands & Glacier. Here the explanation:
26827 The serial real-time clock part used in the design is an
26828 STMicro M41T62. This part has a full-time 32KHz square wave
26829 output that is connected to the TmrClk input to the
26830 processor. The default state for this square wave output is
26831 enabled so the output runs continuously when the board is
26832 powered normally and also from the battery. The TmrClk input
26833 to the processor goes to ground when the power is removed
26834 from the board/processor, and therefore the running square
26835 wave output is driving ground which drains the battery quickly.
26837 Signed-off-by: Stefan Roese <sr@denx.de>
26839 commit a94f22f08f280905926219e568568964cb9eeb9d
26840 Author: Andy Fleming <afleming@freescale.com>
26841 Date: Wed Jun 11 18:10:20 2008 -0500
26843 Fix build issue with string.h and linux/string.h
26846 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
26847 Author: Wolfgang Denk <wd@denx.de>
26848 Date: Fri Jun 6 14:28:14 2008 +0200
26850 tools/mkimage: fix compiler warnings on some systems.
26852 Broke building on some systems, because the host's string.h was interfering
26853 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
26854 we're building for the host, so now we only include when building inside
26857 Signed-off-by: Andy Fleming <afleming@freescale.com>
26859 commit 9973e3c614721bbf169882ffc3be266a6611cd60
26860 Author: Becky Bruce <becky.bruce@freescale.com>
26861 Date: Mon Jun 9 16:03:40 2008 -0500
26863 Change initdram() return type to phys_size_t
26865 This patch changes the return type of initdram() from long int to phys_size_t.
26866 This is required for a couple of reasons: long int limits the amount of dram
26867 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
26868 size of physical memory. phys_size_t is defined as an unsigned long on almost
26869 all current platforms.
26871 This patch *only* changes the return type of the initdram function (in
26872 include/common.h, as well as in each board's implementation of initdram). It
26873 does not actually modify the code inside the function on any of the platforms;
26874 platforms which wish to support more than 2GB of DRAM will need to modify
26875 their initdram() function code.
26877 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
26880 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26882 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
26883 Author: Becky Bruce <becky.bruce@freescale.com>
26884 Date: Mon Jun 9 20:37:18 2008 -0500
26886 Change lmb to use phys_size_t/phys_addr_t
26888 This updates the lmb code to use phys_size_t
26889 and phys_addr_t instead of unsigned long. Other code
26890 which interacts with this code, like getenv_bootm_size()
26893 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
26895 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26897 commit 61b09fc2952dc636017df4e7970e3de132276ba1
26898 Author: Becky Bruce <becky.bruce@freescale.com>
26899 Date: Mon Jun 9 20:37:17 2008 -0500
26901 Change print_size to take phys_size_t
26903 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26905 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
26906 Author: Becky Bruce <becky.bruce@freescale.com>
26907 Date: Mon Jun 9 20:37:16 2008 -0500
26909 Change bd/gd memsize/ram_size to be phys_size_t.
26911 Currently, both are defined as an unsigned long, but
26912 should be phys_size_t. This should result in no real change,
26913 since phys_size_t is currently an unsigned long for all the
26914 default configs. Also add print_lnum to cmd_bdinfo to deal
26915 with the potentially wider memsize.
26917 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26919 commit ba04f7010958e88a8910f2a123fee53fdc72e013
26920 Author: Kumar Gala <galak@kernel.crashing.org>
26921 Date: Tue Jun 10 16:16:02 2008 -0500
26923 FSL LAW: Add new interface to use the last free LAW
26925 LAWs have the concept of priority so its useful to be able to allocate
26926 the lowest (highest number) priority. We will end up using this with the
26929 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26931 commit 859a86a25c569d3665ff413d1d923394b8a961f3
26932 Author: Kumar Gala <galak@kernel.crashing.org>
26933 Date: Wed Jun 11 00:51:45 2008 -0500
26935 85xx/86xx: Move to dynamic mgmt of LAWs
26937 With the new LAW interface (set_next_law) we can move to letting the
26938 system allocate which LAWs are used for what purpose. This makes life
26939 a bit easier going forward with the new DDR code.
26941 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26942 Signed-off-by: Andy Fleming <afleming@freescale.com>
26943 Acked-by: Jon Loeliger <jdl@freescale.com>
26944 Acked-by: Becky Bruce <becky.bruce@freescale.com>
26946 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
26947 Author: Kumar Gala <galak@kernel.crashing.org>
26948 Date: Wed Jun 11 00:44:10 2008 -0500
26950 FSL LAW: Keep track of LAW allocations
26952 Make it so we keep track of which LAWs have allocated and provide
26953 a function (set_next_law) which can allocate a LAW for us if one is
26956 In the future we will move to doing more "dynamic" LAW allocation
26957 since the majority of users dont really care about what LAW number
26960 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
26962 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26963 Signed-off-by: Andy Fleming <afleming@freescale.com>
26965 commit ddde74a159caa6e18b481fec01d40b885aebb566
26966 Author: Kumar Gala <galak@kernel.crashing.org>
26967 Date: Mon Jun 9 22:31:57 2008 -0500
26969 85xx: remove dummy board_early_init_f
26971 A number of board ports have empty version of board_early_init_f
26972 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
26974 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26976 commit 81e56e9af0d43712db8efb843606a8d62eab454f
26977 Author: Kumar Gala <galak@kernel.crashing.org>
26978 Date: Mon Jun 9 18:55:38 2008 -0500
26980 MPC8544DS: Update config.h
26982 * Enable flash progress
26983 * remove CLEAR_LAW0 since we dont really use it
26985 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26987 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
26988 Author: Kumar Gala <galak@kernel.crashing.org>
26989 Date: Mon Jun 9 13:37:24 2008 -0500
26991 85xx: Remove unused and unconfigured memory test code.
26993 Remove unused and unconfigured DDR test code from FSL 85xx boards.
26994 Besides, other common code exists.
26996 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26998 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
26999 Author: Sergei Poselenov <sposelenov@emcraft.com>
27000 Date: Fri Jun 6 15:42:45 2008 +0200
27002 Socrates: Added FPGA base address update in FDT.
27004 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27006 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
27007 Author: Sergei Poselenov <sposelenov@emcraft.com>
27008 Date: Fri Jun 6 15:42:44 2008 +0200
27010 Socrates: NAND support added. Changed the U-Boot base address and
27012 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27014 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
27015 Author: Sergei Poselenov <sposelenov@emcraft.com>
27016 Date: Fri Jun 6 15:42:43 2008 +0200
27018 NAND: Added support for 128-bit OOB, adapted
27020 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27022 commit 31ca0208612f2eb57690110d7c2815953650e47b
27023 Author: Sergei Poselenov <sposelenov@emcraft.com>
27024 Date: Fri Jun 6 15:42:42 2008 +0200
27026 Socrates: added missed file with UPMA configuration data.
27028 Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
27030 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
27031 Author: Sergei Poselenov <sposelenov@emcraft.com>
27032 Date: Fri Jun 6 15:42:41 2008 +0200
27034 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
27036 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27038 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
27039 Author: Sergei Poselenov <sposelenov@emcraft.com>
27040 Date: Fri Jun 6 15:42:40 2008 +0200
27042 Added the upmconfig() function for 85xx.
27044 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27045 Signed-off-by: Andy Fleming <afleming@freescale.com>
27047 commit d39e68514ff943930ee692cff3fde03532eb7fec
27048 Author: Sergei Poselenov <sposelenov@emcraft.com>
27049 Date: Fri Jun 6 15:42:39 2008 +0200
27051 Socrates: config file cleanup.
27053 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27055 commit e8cc3f04b124f757af4528206e60d8eb715ae083
27056 Author: Wolfgang Grandegger <wg@grandegger.com>
27057 Date: Thu Jun 5 13:12:10 2008 +0200
27059 TQM85xx: Change memory map to support Flash memory > 128 MiB
27061 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
27062 memory. The current memory map only supports up to 128 MiB Flash.
27063 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
27064 set, up to 1 GiB flash is supported. To achieve this, the memory
27065 map has to be adjusted in great parts (for example the CCSRBAR is
27066 moved from 0xE0000000 to 0xA0000000).
27068 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
27069 memory map also has to be considered in the kernel (changed
27070 CCSRBAR address, changed PCI IO base address, ...). Please use
27071 an appropriate Flat Device Tree blob (tqm8548.dtb).
27073 Signed-off-by: Martin Krause <martin.krause@tqs.de>
27074 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27076 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
27077 Author: Wolfgang Grandegger <wg@grandegger.com>
27078 Date: Thu Jun 5 13:12:09 2008 +0200
27080 TQM85xx: NAND support via local bus UPMB
27082 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
27083 default and can be enabled for the TQM8548 modules. It is now based on
27084 the re-written FSL NAND UPM driver. A patch has been posted earlier today
27087 "NAND FSL UPM: driver re-write using the hwcontrol callback"
27089 Note that the R/B pin is not supported by that module requiring to use
27090 the specified maximum delay time.
27092 Note: With NAND support enabled the size of the U-Boot image exceeds
27093 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
27094 doubling the image size :-(.
27096 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
27097 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27099 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
27100 Author: Wolfgang Grandegger <wg@grandegger.com>
27101 Date: Thu Jun 5 13:12:08 2008 +0200
27103 TQM8548: PCI express support
27105 This patch adds support for PCI express cards. The board support
27106 now uses common FSL PCI init code, for both, PCI and PCIe on all
27109 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
27110 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27112 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
27113 Author: Wolfgang Grandegger <wg@grandegger.com>
27114 Date: Thu Jun 5 13:12:07 2008 +0200
27116 TQM8548: Basic support for the TQM8548 modules
27118 This patch adds basic support for the TQM8548 module from TQ-Components
27119 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
27122 Furthermore Flash buffer write has been enabled to speed up output to
27123 the Flash by approx. a factor of 10.
27125 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
27126 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27128 commit 25991353204c78b094c3c1fec90182dcd607ab8f
27129 Author: Wolfgang Grandegger <wg@grandegger.com>
27130 Date: Thu Jun 5 13:12:06 2008 +0200
27132 TQM85xx: Support for Flat Device Tree
27134 This patch adds support for Linux kernels using the Flat Device Tree.
27135 It also re-defines the default environment settings for booting Linux
27138 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27140 commit d9ee843d54c54776e1fdb86336ce554906a87331
27141 Author: Wolfgang Grandegger <wg@grandegger.com>
27142 Date: Thu Jun 5 13:12:05 2008 +0200
27144 TQM85xx: Support for Intel 82527 compatible CAN controller
27146 This patch adds initialization of the UPMC RAM to support up to two
27147 Intel 82527 compatible CAN controller on the TQM85xx modules.
27149 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
27150 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27152 commit 518d5cfe72916323c746af1647764459914f555f
27153 Author: Wolfgang Grandegger <wg@grandegger.com>
27154 Date: Thu Jun 5 13:12:04 2008 +0200
27156 TQM85xx: Bugfix in the SDRAM initialisation
27158 The CS0_BNDS register is now set according to the detected
27161 Signed-off-by Martin Krause <martin.krause@tqs.de>
27163 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
27164 Author: Wolfgang Grandegger <wg@grandegger.com>
27165 Date: Thu Jun 5 13:12:03 2008 +0200
27167 TQM85xx: Fix chip select configuration for second FLASH bank
27169 This patch fixes the re-calculation of the automatic chip select
27170 configuration for boards with two populated FLASH banks.
27172 Signed-off-by: Martin Krause <martin.krause@tqs.de>
27174 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
27175 Author: Wolfgang Grandegger <wg@grandegger.com>
27176 Date: Thu Jun 5 13:12:02 2008 +0200
27178 TQM85xx: Support for Spansion 'N' type flashes added
27180 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
27181 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
27182 needs to be changed -> new start address of the environment. The macro
27183 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
27184 defined for boards with 'N' type flashes.
27186 Signed-off-by: Martin Krause <martin.krause@tqs.de>
27187 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27189 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
27190 Author: Wolfgang Grandegger <wg@grandegger.com>
27191 Date: Thu Jun 5 13:12:01 2008 +0200
27193 TQM85xx: Fix CPM port pin configuration
27195 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
27196 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
27197 as serial interface anyway. Worse, on some board variants configuring the
27198 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
27200 Signed-off-by: Martin Krause <martin.krause@tqs.de>
27202 commit b99ba1679e8cd51b023e67098c89e606e47137d2
27203 Author: Wolfgang Grandegger <wg@grandegger.com>
27204 Date: Thu Jun 5 13:12:00 2008 +0200
27206 TQM85xx: Various coding style fixes
27208 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27210 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
27211 Author: Gerald Van Baren <vanbaren@cideas.com>
27212 Date: Tue Jun 10 22:15:58 2008 -0400
27214 libfdt: Move the working_fdt pointer to cmd_fdt.c
27216 The working_fdt pointer was declared in common/fdt_support.c but was
27217 not used there. Move it to common/cmd_fdt.c where it is used (it is
27218 also used in lib_ppc/bootm.c).
27220 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27222 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
27223 Author: Kim Phillips <kim.phillips@freescale.com>
27224 Date: Tue Jun 10 11:06:17 2008 -0500
27226 fdt: unshadow global working fdt variable
27228 differentiate with local variables of the same name by renaming the
27229 global 'fdt' variable 'working_fdt'.
27231 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27233 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
27234 Author: Andy Fleming <afleming@freescale.com>
27235 Date: Tue Jun 10 18:49:34 2008 -0500
27237 socrates: Fix PCI clk fix patch
27239 The submitted patch seems to have been more up-to-date, but an older patch was
27240 already in the repository. This patch encompasses the differences
27242 Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
27244 Signed-off-by: Andy Fleming <afleming@freescale.com>
27246 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
27247 Author: Wolfgang Grandegger <wg@grandegger.com>
27248 Date: Thu Jun 5 13:02:29 2008 +0200
27250 NAND FSL UPM: driver re-write using the hwcontrol callback
27252 This is a re-write of the NAND FSL UPM driver using the more universal
27253 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
27254 list of furher modifications:
27256 - For the time being, the UPM setup writing the UPM array has been
27257 removed from the driver and must now be done by the board specific
27260 - The bus width definition in "struct fsl_upm_nand" is now in bits to
27261 comply with the corresponding Linux driver and 8, 16 and 32 bit
27262 accesses are supported.
27264 - chip->dev_read is only set if fun->dev_ready != NULL, which is
27265 required for boards not connecting the R/B pin.
27267 - A few issue have been fixed with MxMR bit manipulation like in the
27268 corresponding Linux driver.
27270 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
27271 as well, because the address is already determined by
27272 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
27274 This patch has been tested on a TQM8548 modules with the NAND chip
27275 Micron MT29F8G08FABWP.
27277 This patch is based on the following patches posted to this list a few
27280 PPC: add accessor macros to clear and set bits in one shot
27281 83xx/85xx/86xx: add more MxMR local bus definitions
27283 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27284 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
27286 commit 6beecfbb542992eede5831240cd58678274683a9
27287 Author: Wolfgang Grandegger <wg@grandegger.com>
27288 Date: Thu Jun 5 13:11:59 2008 +0200
27290 MPC85xx: Beautify boot output of L2 cache configuration
27292 The boot output is now aligned poperly with other boot output
27298 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27300 commit 398415114f0a705163a14543e9fef03f734b1ffa
27301 Author: Wolfgang Grandegger <wg@grandegger.com>
27302 Date: Wed Jun 4 12:45:22 2008 +0200
27304 PPC: add accessor macros to clear and set bits in one shot
27306 PPC: add accessor macros to clear and set bits in one shot
27308 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
27309 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
27310 They are very handy to manipulate bits it I/O registers.
27312 This patch is required for my forthcoming FSL NAND UPM driver re-write and
27313 the support for the TQM8548 module.
27315 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27317 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
27318 Author: Wolfgang Grandegger <wg@grandegger.com>
27319 Date: Wed Jun 4 13:52:17 2008 +0200
27321 TQM: move TQM boards to board/tqc
27323 Move all TQM board directories to the vendor specific directory "tqc"
27324 for modules from TQ-Components GmbH (http://www.tqc.de).
27326 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27328 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
27329 Author: Wolfgang Grandegger <wg@grandegger.com>
27330 Date: Mon Jun 2 12:09:30 2008 +0200
27332 83xx/85xx/86xx: add more MxMR local bus definitions
27334 83xx/85xx/86xx: add more MxMR local bus definitions
27336 This patch adds more macro definitions for the UPM Machine Mode Registers
27337 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
27338 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
27339 required for my forthcoming FSL NAND UPM driver re-write and the support
27340 for the TQM8548 module.
27342 This patch is based on the following two patches from Anton Vorontsov:
27344 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
27345 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
27347 I leave coding style violation fixes, code beautification and name
27348 corrections to somebody else ;-(.
27350 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27352 commit c8c5fc266e4499e283c293ccb972863156aa4134
27353 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
27354 Date: Thu May 29 18:14:56 2008 +0400
27356 83xx/85xx: further localbus cleanups
27358 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
27359 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
27361 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
27363 commit 42dbd667c88d496882d53e22656e89b654205492
27364 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
27365 Date: Wed May 28 18:20:15 2008 +0400
27367 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
27369 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
27370 use it on MPC85xx and MPC86xx processors.
27372 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
27374 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
27375 Author: Kumar Gala <galak@kernel.crashing.org>
27376 Date: Thu May 29 11:22:06 2008 -0500
27378 85xx: Add setting of cache props in the device tree.
27380 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27382 commit 4dbdb7681e243431530df0725627192a0c4aefda
27383 Author: Kumar Gala <galak@kernel.crashing.org>
27384 Date: Tue Jun 10 16:53:46 2008 -0500
27386 85xx: expose cpu identification
27388 The current cpu identification code is used just to return the name
27389 of the processor at boot. There are some other locations that the name
27390 is useful (device tree setup). Expose the functionality to other bits
27393 Also, drop the 'E' suffix and add it on by looking at the SVR version
27394 when we print this out. This is mainly to allow the most flexible use
27395 of the name. The device tree code tends to not care about the 'E' suffix.
27397 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27399 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
27400 Author: Kim Phillips <kim.phillips@freescale.com>
27401 Date: Tue Jun 10 13:25:24 2008 -0500
27403 mpc83xx: MVBLM7: minor build fixups
27405 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27407 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
27408 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
27409 Date: Tue Jun 10 09:14:05 2008 +0200
27411 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
27413 Add MPC8343 based board mvBlueLYNX-M7.
27414 It's a single board stereo camera system.
27415 Please read doc/README.mvblm7 for details.
27417 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
27418 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27420 commit c005b93925ba49f07da2aa748527996d927e172f
27421 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
27422 Date: Tue Jun 10 09:13:16 2008 +0200
27424 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
27426 Add MPC8343 based board mvBlueLYNX-M7.
27427 It's a single board stereo camera system.
27428 Please read doc/README.mvblm7 for details.
27430 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
27431 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27433 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
27434 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
27435 Date: Thu May 29 18:14:56 2008 +0400
27437 83xx/85xx: further localbus cleanups
27439 move the BRx_* and ORx_* left behind in mpc85xx.h
27441 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
27442 the same, just few differences which needs some attention though).
27444 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
27445 of these defines. So this cleanup I'll leave for the "better times".
27447 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
27448 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27450 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
27451 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
27452 Date: Wed May 28 18:20:15 2008 +0400
27454 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
27456 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
27457 use it on MPC85xx and MPC86xx processors.
27459 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
27460 Acked-by: Andy Fleming <afleming@freescale.com>
27461 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27463 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
27464 Author: Tor Krill <tor@excito.com>
27465 Date: Mon Jun 2 15:09:30 2008 +0200
27467 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
27469 Signed-off-by: Tor Krill <tor@excito.com>
27470 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27472 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
27473 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27474 Date: Mon Jun 9 23:37:44 2008 +0900
27476 net: Conditional COBJS inclusion of network drivers
27478 Replace COBJS-y with appropriate driver config names.
27480 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27481 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27483 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
27484 Author: Gerald Van Baren <vanbaren@cideas.com>
27485 Date: Mon Jun 9 21:02:17 2008 -0400
27487 Use strncmp() for the fdt command
27489 Cleaner than doing multiple conditionals on characters.
27491 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27493 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
27494 Author: Gerald Van Baren <vanbaren@cideas.com>
27495 Date: Sat Jun 7 12:25:05 2008 -0400
27497 The fdt boardsetup command criteria was not unique
27499 It was checking just for "b", which is not unique with respect to the
27500 "boot" command. Change to check for "boa"[rdsetup].
27502 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27504 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
27505 Author: David Gibson <david@gibson.dropbear.id.au>
27506 Date: Tue May 20 17:19:11 2008 +1000
27508 libfdt: Several cleanups to parameter checking
27510 This patch makes a couple of small cleanups to parameter checking of
27513 - In several functions which take a node offset, we use an
27514 idiom involving fdt_next_tag() first to check that we have indeed been
27515 given a node offset. This patch adds a helper function
27516 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
27518 - In fdt_rw.c in several places we have the expanded version
27519 of the RW_CHECK_HEADER() macro for no particular reason. This patch
27520 replaces those instances with an invocation of the macro; that's what
27523 - In fdt_sw.c we rename the check_header_sw() function to
27524 sw_check_header() to match the analgous function in fdt_rw.c, and we
27525 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
27526 functions in fdt_rw.c
27528 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
27530 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
27531 Author: Gerald Van Baren <vanbaren@cideas.com>
27532 Date: Tue Jun 3 20:34:45 2008 -0400
27534 Remove the deprecated CONFIG_OF_FLAT_TREE
27536 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
27537 cleaner, has better functionality, and is better supported.
27539 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27541 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
27542 Author: Gerald Van Baren <vanbaren@cideas.com>
27543 Date: Tue Jun 3 20:26:29 2008 -0400
27545 Change the stxxst to CONFIG_OF_LIBFDT
27547 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
27548 to CONFIG_OF_LIBFDT.
27550 WARNING: It appears that this board lost its ability to boot via a
27551 flattened device tree prior to this changeset.
27553 WARNING: This conversion was untested because I do not have a board to
27556 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27558 commit 589c04271d129729a8b01391453851ab9cc4069c
27559 Author: Gerald Van Baren <vanbaren@cideas.com>
27560 Date: Tue Jun 3 20:24:58 2008 -0400
27562 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
27564 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
27565 to CONFIG_OF_LIBFDT.
27567 WARNING: This conversion is untested because I do not have a board to
27570 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
27571 /aliases/ethernet1 property for the ethernet to work.
27573 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27575 commit ee1e35bede91debc8bff9b02f75574486033b652
27576 Author: Kumar Gala <galak@kernel.crashing.org>
27577 Date: Thu May 29 01:21:24 2008 -0500
27579 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
27581 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27583 commit 3b9519fc50802436e417c839e69df7b2016cade5
27584 Author: Becky Bruce <becky.bruce@freescale.com>
27585 Date: Wed May 14 13:10:04 2008 -0500
27587 MPC85xx: Change traps.c to not reference non-addressable memory
27589 Currently, END_OF_RAM is used by the trap code to determine if
27590 we should attempt to access the stack pointer or not. However,
27591 on systems with a lot of RAM, only a subset of the RAM is
27592 guaranteed to be mapped in and accessible. Change END_OF_RAM
27593 to use get_effective_memsize() instead of using the raw ram
27594 size out of the bd.
27596 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27598 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
27599 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27600 Date: Mon Jun 9 13:39:57 2008 +0900
27602 sh: Renesas Solutions SH7763RDP board support
27604 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
27605 In this patch, support SCIF, NOR Flash, and Ethernet.
27607 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27608 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27610 commit 60179098a95eaa972007d7ec58e4c1588029720f
27611 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27612 Date: Fri Jun 6 16:24:13 2008 +0900
27614 sh: Add support Renesas SH7763
27616 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
27617 This patch supprts CPU register's header file.
27619 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27620 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27622 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
27623 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27624 Date: Fri Jun 6 16:16:08 2008 +0900
27626 sh: SH7763 SCIF support
27628 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
27629 but only SCIF2 is different. This patch work all SCIF channel.
27631 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27632 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27634 commit 79b51ff8205f0354d5300570614c1d2db499679c
27635 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27636 Date: Sat Jun 7 20:51:59 2008 +0900
27638 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
27640 Also get rid of some #ifdefs in *.c files.
27642 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27644 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
27645 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27646 Date: Sat Jun 7 20:51:56 2008 +0900
27648 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
27652 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
27653 need to have this config as a system type specifier.
27655 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
27656 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
27658 Machine type specifiers. Each port should have one of aboves.
27660 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27662 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
27663 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
27664 Date: Fri May 30 16:05:28 2008 -0400
27666 env_nand.c: Added bad block management for environment variables
27668 Modified to check for bad blocks and to skipping over them when
27669 CFG_ENV_RANGE has been defined.
27670 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
27673 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
27674 Signed-off-by: Scott Wood <scottwood@freescale.com>
27676 commit 279726bd00558e80263d44581c44167625b7fb9a
27677 Author: Becky Bruce <becky.bruce@freescale.com>
27678 Date: Wed May 14 13:09:58 2008 -0500
27680 MPC86xx: Change traps.c to not reference non-addressable memory
27682 Currently, END_OF_RAM is used by the trap code to determine if
27683 we should attempt to access the stack pointer or not. However,
27684 on systems with a lot of RAM, only a subset of the RAM is
27685 guaranteed to be mapped in and accessible. Change END_OF_RAM
27686 to use get_effective_memsize() instead of using the raw ram
27687 size out of the bd to prevent us from trying to access
27690 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27692 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
27693 Author: Wolfgang Denk <wd@denx.de>
27694 Date: Fri Jun 6 14:28:14 2008 +0200
27696 tools/mkimage: fix compiler warnings on some systems.
27698 Signed-off-by: Wolfgang Denk <wd@denx.de>
27700 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
27701 Author: Stefan Roese <sr@denx.de>
27702 Date: Fri Jun 6 16:10:41 2008 +0200
27704 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
27706 We use upper case letters for the AMCC processor defines (like
27707 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
27708 not CONFIG_440SPe. This patch fixes the last misspelled config options.
27710 Signed-off-by: Stefan Roese <sr@denx.de>
27712 commit 72675dc6c06a48846d180106161d49dd714383cc
27713 Author: Stefan Roese <sr@denx.de>
27714 Date: Fri Jun 6 15:55:21 2008 +0200
27716 ppc4xx: Unify AMCC's board config files (part 3/3)
27718 This patch series unifies the AMCC eval board ports by introducing
27719 a common include header for all AMCC eval boards:
27721 include/configs/amcc-common.h
27723 This header now includes all common configuration options/defines which
27724 are removed from the board specific headers.
27726 The reason for this is ease of maintenance and unified look and feel
27727 of all AMCC boards.
27729 Signed-off-by: Stefan Roese <sr@denx.de>
27731 commit 490f204096d6e2c9940f67816f154a8125bab116
27732 Author: Stefan Roese <sr@denx.de>
27733 Date: Fri Jun 6 15:55:03 2008 +0200
27735 ppc4xx: Unify AMCC's board config files (part 2/3)
27737 This patch series unifies the AMCC eval board ports by introducing
27738 a common include header for all AMCC eval boards:
27740 include/configs/amcc-common.h
27742 This header now includes all common configuration options/defines which
27743 are removed from the board specific headers.
27745 The reason for this is ease of maintenance and unified look and feel
27746 of all AMCC boards.
27748 Signed-off-by: Stefan Roese <sr@denx.de>
27750 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
27751 Author: Stefan Roese <sr@denx.de>
27752 Date: Fri Jun 6 15:54:31 2008 +0200
27754 ppc4xx: Unify AMCC's board config files (part 1/3)
27756 This patch series unifies the AMCC eval board ports by introducing
27757 a common include header for all AMCC eval boards:
27759 include/configs/amcc-common.h
27761 This header now includes all common configuration options/defines which
27762 are removed from the board specific headers.
27764 The reason for this is ease of maintenance and unified look and feel
27765 of all AMCC boards.
27767 Signed-off-by: Stefan Roese <sr@denx.de>
27769 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
27770 Author: Remy Bohmer <linux@bohmer.net>
27771 Date: Thu Jun 5 13:03:36 2008 +0200
27773 DM9000 fix status check fail 0x6d error for trizeps board
27775 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
27776 the status byte need to be checked to identify a valid packet in the fifo
27778 But, The several different Application Notes do not all speak the same
27779 language on these bits. They do not disagree, but only 1 Application Note
27780 noted explicitly that only these 2 bits need to be checked.
27781 Even the datasheets do not mention anything about these 2 bits.
27783 Because the old code, and the kernel check the whole byte, I left this piece
27786 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
27789 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
27790 in the fifo) is much shorter now, compared to the older U-boot driver code,
27791 so that we can maybe run into a hardware condition now that was never seen
27792 before, or maybe was seen very unfrequently.
27794 Additionaly added a cleanup of a stack variable.
27796 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27797 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27799 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
27800 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27801 Date: Thu Jun 5 22:29:00 2008 +0900
27803 [MIPS] Update <asm/addrspace.h> header
27805 - Fix traditional KSEG names
27806 - Replace PHYSADDR with CPHYSADDR
27808 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27810 commit f0d5a6f060d00358b85c62a921a423ea8df71184
27811 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27812 Date: Thu Jun 5 22:29:00 2008 +0900
27814 [MIPS] mips_config.mk: Misc fixes
27816 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
27819 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27821 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
27822 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27823 Date: Thu Jun 5 22:29:00 2008 +0900
27825 [MIPS] Kill unused <version.h> inclusions
27827 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27829 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
27830 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27831 Date: Thu Jun 5 22:29:00 2008 +0900
27833 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
27835 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
27836 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
27837 in the U-Boot system.
27839 The other is we don't have a proper time management counter like timestamp
27840 other ARCHs have. We need the 32-bit millisecond clock counter.
27842 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
27843 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
27844 of calculated CP0 counter cycles in a CFG_HZ.
27848 * Fix improper CFG_HZ value to have 1000
27850 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
27852 * timer_init: initialize timestamp and set up the first timer expiration.
27853 Note that we don't need to initialize CP0 count/compare registers here
27854 as they have been already zeroed out on the system reset. Leave them as
27857 * get_timer: calculate how many timestamps have been passed, then return
27858 base-relative timestamp. Make sure we can easily count missed timestamps
27859 regardless of CP0 count/compare value.
27861 * get_ticks: return the current timestamp, that is get_timer(0).
27863 Most parts are from good old Linux v2.6.16 kernel.
27866 - Remove FIXME comments as they turned out to be trivial.
27867 - Use CP0 compare register as a global variable for expirelo.
27868 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
27871 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27873 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
27874 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27875 Date: Thu Jun 5 22:29:00 2008 +0900
27877 [MIPS] lib_mips/time.c: Fix udelay
27879 What we have to do is just to wait for given micro-seconds. No need to
27880 take into account current time, get_timer and CFG_HZ.
27882 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27884 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
27885 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27886 Date: Thu Jun 5 22:28:59 2008 +0900
27888 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
27890 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
27891 This patch replaces mips_{compare,count}_set and mips_count_get with
27894 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27896 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
27897 Author: Remy Bohmer <linux@bohmer.net>
27898 Date: Tue Jun 3 15:48:17 2008 +0200
27900 Get rid of annoying/superfluous bad-checksum warning message
27902 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
27903 It is annoying for ordinary users who start to doubt the network connection
27904 in general when they see messages like this.
27906 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
27907 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
27908 now before checking the checksum.
27910 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27911 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27913 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
27914 Author: Remy Bohmer <linux@bohmer.net>
27915 Date: Wed Jun 4 10:47:25 2008 +0200
27917 Fix order for reading rx-status registers in 32bit mode of DM9000
27919 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
27920 a bug in reading the rx-status registers in 32bit mode only.
27921 This patch repairs this.
27923 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27924 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27926 commit 98291e2e689096420465074cce926b226d2e71b4
27927 Author: Remy Bohmer <linux@bohmer.net>
27928 Date: Tue Jun 3 15:26:26 2008 +0200
27930 DM9000: Some minor code cleanups
27932 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
27933 need some other minor cleanup.
27935 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27936 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27938 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
27939 Author: Remy Bohmer <linux@bohmer.net>
27940 Date: Tue Jun 3 15:26:25 2008 +0200
27942 DM9000: Make driver work properly for DM9000A
27944 The DM9000A network controller does not work with the U-boot DM9000x driver.
27945 Analysis showed that many incoming packets are lost.
27947 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
27948 check for a valid rx packet be done on the interrupt status register, not
27949 directly by performing the dummy read and the rx status check as is currently
27950 the case in the u-boot driver.
27952 When the recommended poll is done as suggested the driver starts working
27953 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
27954 can be more than 1 package in the fifo at the same time.
27956 The driver must perform the rx-status check in a loop and read and handle all
27957 packages until there is no more left _after_ the interrupt RX flag is set.
27959 This change has been tested with DM9000A, DM9000E, DM9000EP.
27961 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27962 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27964 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
27965 Author: Remy Bohmer <linux@bohmer.net>
27966 Date: Tue Jun 3 15:26:24 2008 +0200
27968 DM9000: Improve eth_reset() routine
27970 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
27971 reset procedure must be done twice to properly reset the DM9000 by means of software.
27972 This errata is not needed anymore for the DM9000A, but it does not bother it.
27974 This change has been tested with DM9000A, DM9000E, DM9000EP.
27976 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27977 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27979 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
27980 Author: Remy Bohmer <linux@bohmer.net>
27981 Date: Tue Jun 3 15:26:23 2008 +0200
27983 DM9000: improve eth_send() routine
27985 The eth_send routine of the U-boot DM9000x driver does not match the
27986 DM9000 or DM9000A application notes/programming guides.
27988 This change improves the stability of the DM9000A network controller.
27990 This change has been tested with DM9000A, DM9000E, DM9000EP.
27992 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27993 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27995 commit 134e266253c02a7832560da59d394989c4f64453
27996 Author: Remy Bohmer <linux@bohmer.net>
27997 Date: Tue Jun 3 15:26:22 2008 +0200
27999 DM9000: repair debug logging
28001 It seems that the debugging code of the DM9000x driver in U-boot has not been
28002 compiled for a long time, because it cannot compile...
28004 Also rearranged some loglines to get more useful info while debugging.
28006 Signed-off-by: Remy Bohmer <linux@bohmer.net>
28007 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28009 commit a101361bfe23c120321e45d114c0603b8e0763e9
28010 Author: Remy Bohmer <linux@bohmer.net>
28011 Date: Tue Jun 3 15:26:21 2008 +0200
28013 DM9000: Add data bus-width auto detection.
28015 The U-boot DM9000x driver contains a compile time bus-width definition for
28016 the databus connected to the network controller.
28018 This compile check makes the code unclear, inflexible and is unneccessary.
28019 It can be asked to the network controller what its bus-width is by reading bits
28020 6 and 7 of the interrupt status register.
28022 The linux kernel already uses a runtime mechanism to determine this bus-width,
28023 so the implementation below looks somewhat like that implementation.
28025 This change has been tested with DM9000A, DM9000E, DM9000EP.
28027 Signed-off-by: Remy Bohmer <linux@bohmer.net>
28028 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28030 commit 63a0afa0c32e5f4ea98a9439542870072437404d
28031 Author: Stefan Roese <sr@denx.de>
28032 Date: Wed Jun 4 19:19:20 2008 +0200
28034 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
28036 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
28037 introduced by the commit:
28039 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
28041 With this patch SDRAM will get initialized again and booting from NAND
28044 Signed-off-by: Stefan Roese <sr@denx.de>
28045 Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
28047 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
28048 Author: Wolfgang Denk <wd@denx.de>
28049 Date: Tue May 27 14:19:30 2008 +0200
28051 Socrates: Fix PCI bus frequency report
28053 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28055 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
28056 Author: Tor Krill <tor@excito.com>
28057 Date: Thu May 29 11:10:30 2008 +0200
28059 Fix incorrect switch for IF_TYPE in part.c
28061 Use correct field in block_dev_desc_t when writing interface type in
28062 dev_print. Error introduced in 574b3195.
28064 Also added fix from Martin Krause
28066 Signed-off-by: Tor Krill <tor@excito.com>
28068 commit b64b8a0bd310935b70af69ac970952f2b364ae56
28069 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
28070 Date: Tue May 27 10:25:39 2008 +0200
28072 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
28074 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
28076 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
28077 Author: Peter Tyser <ptyser@xes-inc.com>
28078 Date: Thu May 22 18:56:52 2008 -0500
28080 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
28082 Removed unneeded command line history initialization. Also, the original
28083 code would access the 'initted' variable before relocation to SDRAM
28084 which resulted in erratic behavior since the bss is not initialized when
28085 executing from flash.
28087 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
28089 commit 22f371b63038a4ecab04068877c1089e51a01ba1
28090 Author: Grant Erickson <gerickson@nuovations.com>
28091 Date: Wed May 21 13:28:30 2008 -0700
28093 PPC4xx: Simplified post_word_{load, store}
28095 This patch simplifies post_word_{load,store} by using the preprocessor
28096 to eliminate redundant, copy-and-pasted code.
28098 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
28100 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
28101 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
28102 Date: Wed May 7 21:25:33 2008 +0400
28104 cfi_flash: enable M18 flash chips family support.
28106 Added new command set ID. Buffered write command processing is changed
28107 in order to support M18 flash chips family.
28109 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
28110 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
28112 commit 93c56f212ccdadc182018f0769cb284426b88f1d
28113 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
28114 Date: Wed May 7 21:24:44 2008 +0400
28116 cfi_flash: support of long cmd in U-boot.
28118 Some NOR flash chips needs support of commands with length grether than max
28119 value size of uchar. For example all M18 family chips use 0x1ff command in
28120 buffered write mode as value of program loops count.
28122 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
28123 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
28125 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
28126 Author: Stefan Roese <sr@denx.de>
28127 Date: Fri May 16 11:06:06 2008 +0200
28129 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
28131 On AD7414 the first value upon bootup is not read correctly.
28132 This is most likely because of the 800ms update time of the
28133 temp register in normal update mode. To get current values
28134 each time we issue the "dtt" command including upon powerup
28135 we switch into one-short mode.
28137 This patch fixes the problem on AD7414 equipped boards (Sequoia,
28138 Canyonlands etc), that temp value printed in the bootup log was
28141 Signed-off-by: Stefan Roese <sr@denx.de>
28143 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
28144 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28145 Date: Fri May 30 16:55:06 2008 +0200
28147 ppc4xx: Cleanup CPCI405 variant's config file
28149 This patch removes some dead code from CPCI405 board's
28150 config files. JFFS2 support is also removed. It's not used and
28151 CPCI4052 does not build anymore without some size reduction.
28153 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28155 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
28156 Author: Kenneth Johansson <kenneth@southpole.se>
28157 Date: Thu May 29 16:32:33 2008 +0200
28159 Remove shell variable UNDEF_SYM.
28161 UNDEF_SYM is a shell variable in the main Makefile used to force the
28162 linker to add all u-boot commands to the final image. It has no use here.
28164 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
28166 commit 8c66497e06bf803489c589df58ee591d71033274
28167 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28168 Date: Fri May 16 11:10:35 2008 +0200
28170 Add support for environment in SPI flash
28172 This is pretty incomplete...it doesn't handle reading the environment
28173 before relocation, it doesn't support redundant environment, and it
28174 doesn't support embedded environment. But apart from that, it does
28177 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28179 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
28180 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28181 Date: Fri May 16 11:10:34 2008 +0200
28183 SPI Flash: Add "sf" command
28185 This adds a new command, "sf" which can be used to manipulate SPI
28186 flash. Currently, initialization, reading, writing and erasing is
28189 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28191 commit d25ce7d24cc0f93881559f4009175ea305af65e8
28192 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28193 Date: Fri May 16 11:10:33 2008 +0200
28195 SPI Flash subsystem
28197 This adds a new SPI flash subsystem.
28199 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
28200 but some preliminary support for other flash types is in place as
28203 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28205 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
28206 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
28207 Date: Fri May 16 11:10:32 2008 +0200
28209 atmel_spi: Driver for the Atmel SPI controller
28211 This adds a driver for the SPI controller found on most AT91 and AVR32
28212 chips, implementing the new SPI API.
28215 - Update to new API
28216 - Handle zero-length transfers appropriately. The user may send a
28217 zero-length SPI transfer with SPI_XFER_END set in order to
28218 deactivate the chip select after a series of transfers with chip
28219 select active. This is useful e.g. when polling the status
28220 register of DataFlash.
28222 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28224 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
28225 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
28226 Date: Fri May 16 11:10:31 2008 +0200
28228 SPI API improvements
28230 This patch gets rid of the spi_chipsel table and adds a handful of new
28231 functions that makes the SPI layer cleaner and more flexible.
28233 Instead of the spi_chipsel table, each board that wants to use SPI
28234 gets to implement three hooks:
28235 * spi_cs_activate(): Activates the chipselect for a given slave
28236 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
28237 * spi_cs_is_valid(): Determines if the given bus/chipselect
28238 combination can be activated.
28240 Not all drivers may need those extra functions however. If that's the
28241 case, the board code may just leave them out (assuming they know what
28242 the driver needs) or rely on the linker to strip them out (assuming
28243 --gc-sections is being used.)
28245 To set up communication parameters for a given slave, the driver needs
28246 to call spi_setup_slave(). This returns a pointer to an opaque
28247 spi_slave struct which must be passed as a parameter to subsequent SPI
28248 calls. This struct can be freed by calling spi_free_slave(), but most
28249 driver probably don't want to do this.
28251 Before starting one or more SPI transfers, the driver must call
28252 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
28253 the hardware. When all transfers are done, the driver must call
28254 spi_release_bus() to make the bus available to others, and possibly
28255 shut down the SPI controller hardware.
28257 spi_xfer() behaves mostly the same as before, but it now takes a
28258 spi_slave parameter instead of a spi_chipsel function pointer. It also
28259 got a new parameter, flags, which is used to specify chip select
28260 behaviour. This may be extended with other flags in the future.
28262 This patch has been build-tested on all powerpc and arm boards
28263 involved. I have not tested NIOS since I don't have a toolchain for it
28264 installed, so I expect some breakage there even though I've tried
28265 fixing up everything I could find by visual inspection.
28267 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
28268 DataFlash drivers posted as a follow-up. I'd like some help testing
28269 other boards that use the existing SPI API.
28271 But most of all, I'd like some comments on the new API. Is this stuff
28272 usable for everyone? If not, why?
28275 - Build fixes for various boards, drivers and commands
28276 - Provide common struct spi_slave definition that can be extended by
28278 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
28279 - Make default bus and mode build-time configurable
28280 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
28283 - Add opaque struct spi_slave for controller-specific data associated
28285 - Add spi_claim_bus() and spi_release_bus()
28286 - Add spi_free_slave()
28287 - spi_setup() is now called spi_setup_slave() and returns a
28289 - soft_spi now supports four SPI modes (CPOL|CPHA)
28290 - Add bus parameter to spi_setup_slave()
28291 - Convert the new i.MX32 SPI driver
28292 - Convert the new MC13783 RTC driver
28295 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
28298 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28299 Tested-by: Guennadi Liakhovetski <lg@denx.de>
28301 commit 289011207d999b2e4085150d2aa30d547ad9b800
28302 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28303 Date: Fri May 16 11:10:30 2008 +0200
28305 Move definition of container_of() to common.h
28307 AVR32 and AT91SAM9 both have their own identical definitions of
28308 container_of() taken from the Linux kernel. Move it to common.h so
28309 that all architectures can use it.
28311 container_of() is already used by some drivers, and will be used
28312 extensively by the new and improved SPI API.
28314 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28316 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
28317 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28318 Date: Fri May 16 11:08:11 2008 +0200
28320 soft_i2c: Pull SDA high before reading
28322 Spotted by Dean Capindale.
28324 Systems that support open-drain GPIO properly are allowed provide an
28325 empty I2C_TRISTATE define. However, this means that we need to be
28326 careful not to drive SDA low when the slave is expected to respond.
28328 This patch adds a missing I2C_SDA(1) to read_byte() required to
28329 tristate the SDA line on systems that support open-drain GPIO.
28331 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28333 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
28334 Author: Stefan Roese <sr@denx.de>
28335 Date: Mon May 19 11:34:53 2008 +0200
28337 ppc4xx: Remove implementations of testdram()
28339 This patch removes the used testdram() implementations of the board
28340 that are maintained by myself.
28342 Signed-off-by: Stefan Roese <sr@denx.de>
28344 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
28345 Author: Stefan Roese <sr@denx.de>
28346 Date: Mon Jun 2 17:37:28 2008 +0200
28348 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
28350 Historically the 405 U-Boot port had a dram_init() call in early init
28351 stage. This function was still called from start.S and most of the time
28352 coded in assembler. This is not needed anymore (since a long time) and
28353 boards should implement the common initdram() function in C instead.
28355 This patch now removed the dram_init() call from start.S and removes the
28356 empty implementations that are scattered through most of the 405 board
28357 ports. Some older board ports really implement this dram_init() though.
28367 I changed those boards to call this assembler dram_init() function now
28368 from their board specific initdram() instead. This *should* work, but please
28369 test again on those platforms. And it is perhaps a good idea that those
28370 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
28371 some time. So further patches welcome here.
28373 Signed-off-by: Stefan Roese <sr@denx.de>
28375 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
28376 Author: Stefan Roese <sr@denx.de>
28377 Date: Mon Jun 2 17:22:11 2008 +0200
28379 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
28381 Signed-off-by: Stefan Roese <sr@denx.de>
28383 commit 39b32be18cd33b53a84065edcd4e465165cc5564
28384 Author: Stefan Roese <sr@denx.de>
28385 Date: Mon Jun 2 17:20:03 2008 +0200
28387 ppc4xx: Fix common ECC generation code for 440GP style platforms
28389 This patch makes the common 4xx ECC code really usable on 440GP style
28392 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
28393 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
28394 we need to make some processor dependant defines used later on by the
28397 Signed-off-by: Stefan Roese <sr@denx.de>
28399 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
28400 Author: Stefan Roese <sr@denx.de>
28401 Date: Mon Jun 2 17:13:55 2008 +0200
28403 ppc4xx: Change Kilauea to use the common DDR2 init function
28405 This patch changes the kilauea and kilauea_nand (for NAND booting)
28406 board port to not use a board specific DDR2 init routine anymore. Now
28407 the common code from cpu/ppc4xx is used.
28409 Thanks to Grant Erickson for all his basic work on this 405EX early
28412 Signed-off-by: Stefan Roese <sr@denx.de>
28414 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
28415 Author: Stefan Roese <sr@denx.de>
28416 Date: Mon Jun 2 14:59:21 2008 +0200
28418 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
28420 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
28421 ppc4xx related SDRAM/DDR/DDR2 controller defines.
28423 Signed-off-by: Stefan Roese <sr@denx.de>
28425 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
28426 Author: Stefan Roese <sr@denx.de>
28427 Date: Mon Jun 2 14:57:41 2008 +0200
28429 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
28431 This patch removes all SDRAM related defines from the PPC4xx headers
28432 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
28433 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
28435 It also introduces new defines for the equipped SDRAM controller based on
28436 which PPC variant is used. There new defines are:
28438 used on 405GR/CR/EP and some Xilinx Virtex boards.
28440 used on 440GP/GX/EP/GR.
28442 used on 440EPx/GRx.
28444 used on 405EX/r/440SP/SPe/460EX/GT.
28446 Signed-off-by: Stefan Roese <sr@denx.de>
28448 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
28449 Author: Stefan Roese <sr@denx.de>
28450 Date: Mon Jun 2 14:35:44 2008 +0200
28452 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
28454 This patch consolidates the 405 and 440 parts of the NAND booting code
28455 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
28456 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
28457 Only *after* running from this location, nand_boot() is called.
28459 Please note that the initsdram() call is now moved from nand_boot.c
28460 to start.S. I experienced problems with some boards like Kilauea
28461 (405EX), which don't have internal SRAM (OCM) and relocation needs to
28462 be done to SDRAM before the NAND controller can get accessed. When
28463 initdram() is called later on in nand_boot(), this can lead to problems
28464 with variables in the bss sections like nand_ecc_pos[].
28466 Signed-off-by: Stefan Roese <sr@denx.de>
28467 Acked-by: Scott Wood <scottwood@freescale.com>
28469 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
28470 Author: Grant Erickson <gerickson@nuovations.com>
28471 Date: Thu May 22 14:44:24 2008 -0700
28473 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
28475 This patch (Part 2 of 2):
28477 * Rolls up a suite of changes to enable correct primordial stack and
28478 global data handling when the data cache is used for such a purpose
28479 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
28481 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
28482 eliminating redundant ECC initialization implementations and moving
28483 redundant SDRAM initialization out of board code into shared 4xx
28486 * Enables MCSR visibility on the 405EX(r).
28488 * Enables the use of the data cache for initial RAM on
28489 both AMCC's Kilauea and Makalu and removes a redundant
28490 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
28492 - Removed, per Stefan Roese's request, defunct memory.c file for
28493 Makalu and rolled sdram_init from it into makalu.c.
28495 With respect to the 4xx DDR initialization and ECC unification, there
28496 is certainly more work that can and should be done (file renaming,
28497 etc.). However, that can be handled at a later date on a second or
28498 third pass. As it stands, this patch moves things forward in an
28499 incremental yet positive way for those platforms that utilize this
28500 code and the features associated with it.
28502 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
28503 Signed-off-by: Stefan Roese <sr@denx.de>
28505 commit c821b5f120bedf73867513466412587c6912a8f8
28506 Author: Grant Erickson <gerickson@nuovations.com>
28507 Date: Thu May 22 14:44:14 2008 -0700
28509 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
28511 This patch (Part 1 of 2):
28513 * Rolls up a suite of changes to enable correct primordial stack and
28514 global data handling when the data cache is used for such a purpose
28515 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
28517 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
28518 eliminating redundant ECC initialization implementations and moving
28519 redundant SDRAM initialization out of board code into shared 4xx
28522 * Enables MCSR visibility on the 405EX(r).
28524 * Enables the use of the data cache for initial RAM on
28525 both AMCC's Kilauea and Makalu and removes a redundant
28526 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
28528 - Removed, per Stefan Roese's request, defunct memory.c file for
28529 Makalu and rolled sdram_init from it into makalu.c.
28531 With respect to the 4xx DDR initialization and ECC unification, there
28532 is certainly more work that can and should be done (file renaming,
28533 etc.). However, that can be handled at a later date on a second or
28534 third pass. As it stands, this patch moves things forward in an
28535 incremental yet positive way for those platforms that utilize this
28536 code and the features associated with it.
28538 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
28539 Signed-off-by: Stefan Roese <sr@denx.de>
28541 commit a439680019e06171d4a5694b7992accce87f590e
28542 Author: Grant Erickson <gerickson@nuovations.com>
28543 Date: Wed May 21 13:28:30 2008 -0700
28545 PPC4xx: Simplified post_word_{load, store}
28547 This patch simplifies post_word_{load,store} by using the preprocessor
28548 to eliminate redundant, copy-and-pasted code.
28550 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
28552 commit f979690ee337450b2030aba128f95b7a8d9881c0
28553 Author: Kumar Gala <galak@kernel.crashing.org>
28554 Date: Thu May 15 15:13:08 2008 -0500
28556 Fix warnings from gcc-4.3.0 build on a ppc host
28558 * The cfi_flash.c memset fix actual allows the board to boot so there is
28559 a bit more going on here than just resolving warnings associated with
28560 uninitialized variables.
28562 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
28563 inline function 'ext2_find_next_zero_bit' which is not static
28565 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28567 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
28568 Author: Becky Bruce <becky.bruce@freescale.com>
28569 Date: Wed May 14 13:09:51 2008 -0500
28571 MPC512x: Change traps.c to not reference non-addressable memory
28573 Currently, END_OF_RAM is used by the trap code to determine if
28574 we should attempt to access the stack pointer or not. However,
28575 on systems with a lot of RAM, only a subset of the RAM is
28576 guaranteed to be mapped in and accessible. Change END_OF_RAM
28577 to use get_effective_memsize() instead of using the raw ram
28578 size out of the bd.
28580 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
28582 commit 81673e9ae14b771cd13faf19947192599cae3959
28583 Author: Kumar Gala <galak@kernel.crashing.org>
28584 Date: Tue May 13 19:01:54 2008 -0500
28586 Make sure common.h is the first include.
28588 If common.h isn't first we can get CONFIG_ options defined in the
28589 board config file ignored. This can cause an issue if any of those
28590 config options impact the size of types of data structures
28591 (eg CONFIG_PHYS_64BIT).
28593 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28595 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
28596 Author: Marian Balakowicz <m8@semihalf.com>
28597 Date: Tue May 13 15:53:29 2008 +0200
28599 Avoid initrd and logbuffer area overlaps
28601 Add logbuffer to reserved LMB areas to prevent initrd allocation
28602 from overlaping with it.
28604 Make sure to use correct logbuffer base address.
28606 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28608 commit 6956d53d9934862507f83f0e3255dfd4662e7482
28609 Author: Sascha Laue <sascha.laue@liebherr.com>
28610 Date: Tue May 13 13:29:54 2008 +0200
28612 lwmon5: add memory-pattern-test to FPGA POST.
28614 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
28615 Author: Becky Bruce <becky.bruce@freescale.com>
28616 Date: Thu May 8 19:02:51 2008 -0500
28618 PPC: 86xx Add bat registers to reginfo command
28620 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
28622 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
28623 Author: Becky Bruce <becky.bruce@freescale.com>
28624 Date: Fri May 9 15:41:35 2008 -0500
28626 PPC: Add print_bats() to lib_ppc/bat_rw.c
28628 This function prints the values of all the BAT register
28629 pairs - I needed this for debug earlier this week; adding it to
28630 lib_ppc so others can use it (and add it to reginfo commands
28633 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
28635 commit c148f24c15743a02e855636e6bed013bd121f7f2
28636 Author: Becky Bruce <becky.bruce@freescale.com>
28637 Date: Thu May 15 21:29:04 2008 -0500
28639 PPC: Change lib_ppc/bat_rw.c to use high bats
28641 Currently, this code only deals with BATs 0-3, which makes
28642 it useless on systems that support BATs 4-7. Add the
28643 support for these registers.
28645 Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
28647 commit 31d826722434931e1152a09d140187dcf72f8aac
28648 Author: Becky Bruce <becky.bruce@freescale.com>
28649 Date: Thu May 8 19:02:12 2008 -0500
28651 PPC: Create and use CONFIG_HIGH_BATS
28653 Change all code that conditionally operates on high bat
28654 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
28655 instead of the myriad ways this is done now. Define the option
28656 for every config for which high bats are supported (and
28657 enabled by early boot, on parts where they're not always
28660 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
28662 commit aa3b8bf9c30065bb2ea852799d32db5020598495
28663 Author: Wolfgang Grandegger <wg@grandegger.com>
28664 Date: Wed May 28 19:55:19 2008 +0200
28666 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
28668 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
28669 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28671 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
28672 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28673 Date: Wed May 28 13:06:25 2008 -0500
28675 ColdFire: Add 10 base ethernet support for mcf5445x
28677 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28678 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28680 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
28681 Author: Jason McMullan <mcmullan@netapp.com>
28682 Date: Fri May 30 00:53:38 2008 +0900
28684 mips: Add an 'include/asm/errno.h', like all other architectures
28686 All other u-boot architectures have an include/asm/errno.h, so
28687 this change adds it to the mips include/asm-mips headers also.
28689 Stolen from Linux 2.6.25.
28691 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
28693 commit e2ad8426624bac457acc6925b6ff408e9bf20466
28694 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28695 Date: Fri May 30 00:53:38 2008 +0900
28697 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
28699 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28701 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
28702 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28703 Date: Fri May 30 00:53:38 2008 +0900
28705 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
28707 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28709 commit bf462ae450a7f2eeeddc699ed345b391e3263540
28710 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28711 Date: Fri May 30 00:53:37 2008 +0900
28713 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
28715 No functional changes.
28717 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28719 commit 89a1550ec6b74452274a7a23127936e2c7eec711
28720 Author: Jason McMullan <mcmullan@netapp.com>
28721 Date: Fri May 30 00:53:37 2008 +0900
28723 mips: If CONFIG_CMD_SPI is defined, call spi_init()
28725 The mips architecture currently does not call 'spi_init()' in the generic
28726 board initialization routine is CONFIG_CMD_SPI is defined.
28728 This patch rectifies that problem.
28730 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
28731 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28733 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
28734 Author: Jason McMullan <mcmullan@netapp.com>
28735 Date: Fri May 30 00:53:37 2008 +0900
28737 [MIPS] lib_mips/board.c: Add nand_init
28739 This patch adds the standard 'nand_init()' call to the mips generic
28740 'board_init_r()' call, bringing MIPS in line with the other architectures.
28742 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
28743 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28745 commit d6ac2ed893c2168738aee01579d6283af8d37045
28746 Author: Scott Wood <scottwood@freescale.com>
28747 Date: Thu May 22 10:49:46 2008 -0500
28749 Remove prototypes of nand_init() in favor of including nand.h.
28751 Likewise with onenand_init().
28753 Signed-off-by: Scott Wood <scottwood@freescale.com>
28755 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
28756 Author: Scott Wood <scottwood@freescale.com>
28757 Date: Thu May 22 10:49:00 2008 -0500
28759 Make onenand_uboot.h self-sufficient.
28761 Don't assume types are provided by previously included headers.
28763 Signed-off-by: Scott Wood <scottwood@freescale.com>
28765 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
28766 Author: Dirk Behme <dirk.behme@gmail.com>
28767 Date: Wed Jan 16 14:26:59 2008 +0100
28769 nand: Correct NAND erase percentage output
28771 For NAND erase sizes smaller than one NAND erase block, erase
28772 percentage output becomes grater than 100% e.g.
28776 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
28777 > nand erase 0x100000 0x2000
28778 NAND erase: device 0 offset 0x100000, size 0x2000
28779 Erasing at 0x100000 -- 200% complete.
28784 Correct this and give user a warning that more is erased than specified:
28787 > nand erase 0x100000 0x2000
28788 NAND erase: device 0 offset 0x100000, size 0x2000
28789 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
28790 Erasing 0x00004000 instead
28791 Erasing at 0x100000 -- 100% complete.
28796 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
28798 commit 5922db6c0948506be91e0de44e7a6863a18a417f
28799 Author: Stelian Pop <stelian@popies.net>
28800 Date: Tue May 13 17:31:24 2008 +0200
28802 Cleanup nand_info[] declaration.
28804 The nand_info array is declared as extern in several .c files.
28805 Those days, nand.h contains a reference to the array, so there is
28806 no need to declare it elsewhere.
28808 Signed-off-by: Stelian Pop <stelian@popies.net>
28809 Signed-off-by: Scott Wood <scottwood@freescale.com>
28811 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
28812 Author: Scott Wood <scottwood@freescale.com>
28813 Date: Mon May 19 09:30:43 2008 -0500
28815 NAND: Provide a sane default for NAND_MAX_CHIPS.
28817 This allows the header to be included regardless of whether a board's
28818 config file provides NAND-related defininitions.
28820 Signed-off-by: Scott Wood <scottwood@freescale.com>
28822 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
28823 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28824 Date: Mon May 26 12:19:10 2008 +0200
28826 avr32: Fix theoretical race in udelay()
28828 If the specified delay is very short, the cycle counter may go past the
28829 "end" time we are waiting for before we get around to reading it.
28831 Fix it by checking the different between the cycle count "now" and the
28832 cycle count at the beginning. This will work as long as the delay
28833 measured in number of cycles is below 2^31.
28835 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28837 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
28838 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28839 Date: Wed May 21 13:01:09 2008 +0200
28841 avr32: Compile atmel_mci.o conditionally
28843 Remove #ifdef CONFIG_MMC from the source file and use conditional
28844 compilation in the Makefile instead.
28846 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28848 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
28849 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28850 Date: Thu May 22 12:28:25 2008 +0200
28852 avr32: Fix wrong error flags in atmel_mci driver
28854 Make sure we check for CRC errors when sending commands that use CRC
28857 Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
28858 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28860 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
28861 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28862 Date: Wed May 21 11:10:59 2008 +0200
28864 avr32: Fix two warnings in atmel_mci.c
28866 The warnings are harmless but annoying. Let's fix them.
28868 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28870 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
28871 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28872 Date: Mon May 19 11:36:28 2008 +0200
28874 avr32: Rework SDRAM initialization code
28876 This cleans up the SDRAM initialization and related code a bit, and
28877 allows faster booting.
28879 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
28880 * Remove memory test from sdram_init() and make caller responsible
28881 for verifying the SDRAM and determining its size.
28882 * Remove base_address member from struct sdram_config (was sdram_info)
28883 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
28884 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
28886 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28888 commit 95107b7c028806919630bf02c653aa8f4f867c94
28889 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28890 Date: Mon May 19 11:27:37 2008 +0200
28892 avr32: Do stricter stack checking in the exception handler
28894 Don't do a stack dump if the stack pointer is outside the memory area
28895 reserved for stack.
28897 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28899 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
28900 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28901 Date: Fri May 2 15:32:57 2008 +0200
28903 avr32: Use the same entry point for reset and exception handling
28905 Since the reset vector is always aligned to a very large boundary, we
28906 can save a couple of KB worth of alignment padding by placing the
28907 exception vectors at the same address.
28909 Deciding which one it is is easy: If we're handling an exception, the
28910 CPU is in Exception mode. If we're starting up after reset, the CPU is
28911 in Supervisor mode. So this adds a very minimal overhead to the reset
28912 path (only executed once) and the exception handling path (normally
28913 never executed at all.)
28915 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28917 commit 0c16eed2189a190bd5655b33c029f809a9b31128
28918 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28919 Date: Fri May 2 15:24:22 2008 +0200
28921 avr32: Put memset in its own section
28923 All C code is compiled with -ffunction-sections -fdata-sections.
28924 Assembly functions should get their own sections as well so that
28925 everything looks consistent.
28927 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28929 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
28930 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28931 Date: Fri May 2 15:21:40 2008 +0200
28933 avr32: Rename pm_init() as clk_init() and make SoC-specific
28935 pm_init() was always more about clock initialization than anything
28936 else. Dealing with PLLs, clock gating and such is also inherently
28937 SoC-specific, so move it into a SoC-specific directory.
28939 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28941 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
28942 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28943 Date: Wed Apr 30 16:15:57 2008 +0200
28945 avr32: Use new-style Makefile for the at32ap platform
28947 This makes it easier to avoid compiling certain files later.
28949 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28951 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
28952 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28953 Date: Wed Apr 30 14:36:47 2008 +0200
28955 avr32: Remove unused file cpu/at32ap/pm.c
28957 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28959 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
28960 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28961 Date: Wed Apr 30 14:19:28 2008 +0200
28963 avr32: Clean up the HMATRIX code
28965 Rework the HMATRIX configuration interface so that it becomes easier
28966 to configure the HMATRIX for boards with special needs, and add new
28969 The HMATRIX header file has been split into a general,
28970 chip-independent part with register definitions, etc. and a
28971 chip-specific part with SFR bitfield definitions and master/slave
28974 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28976 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
28977 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28978 Date: Thu Nov 22 12:14:11 2007 +0100
28980 avr32: Add support for the ATSTK1006 board
28982 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
28983 board. It's currently in production and will be available soon.
28985 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28987 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
28988 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28989 Date: Tue Apr 29 12:53:05 2008 +0200
28991 avr32: Get rid of the .flashprog section
28993 The .flashprog section was only needed back when we were running
28994 directly from flash, and it's even more useless on NGW100 since it
28995 uses the CFI flash driver which never used this workaround in the
28998 Remove it on STK1000 as well, and get rid of all the associated code and
29001 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29003 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
29004 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29005 Date: Wed Apr 30 13:09:56 2008 +0200
29007 avr32: Use correct condition around macb clock accessors
29009 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
29010 the chip has a MACB controller, not when it has a USART.
29012 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29014 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
29015 Author: David Brownell <david-b@pacbell.net>
29016 Date: Wed Apr 16 22:57:58 2008 -0700
29018 avr32: Disable the AP7000 internal watchdog on startup
29020 This patch forces the watchdog off in all cases. That will at least
29021 get rid of the constant reboot cycle, though it won't let the watchdog
29022 actually run in the new kernels: its probe() comes up with a polite
29025 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29027 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
29028 Author: David Brownell <david-b@pacbell.net>
29029 Date: Fri Feb 22 12:54:39 2008 -0800
29031 avr32: stk1002 and ngw100 convergence
29033 Make STK1002 and NGW100 boards act more alike:
29034 - STK boards can use as many arguments as NGW
29035 - STK boards don't need to manage FPGAs either
29036 - NGW commands should match STK ones
29038 Also spell U-Boot right in prompts for STK1002 and NGW100.
29040 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
29041 [haavard.skinnemoen@atmel.com: update STK100[34] as well]
29042 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
29044 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
29045 Author: Sergei Poselenov <sposelenov@emcraft.com>
29046 Date: Tue May 27 13:47:00 2008 +0200
29048 Socrates: Fix PCI bus frequency report
29050 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29052 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
29053 Author: Sergei Poselenov <sposelenov@emcraft.com>
29054 Date: Tue May 27 11:49:13 2008 +0200
29056 Socrates: Added USB support.
29058 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29060 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
29061 Author: Sergei Poselenov <sposelenov@emcraft.com>
29062 Date: Tue May 27 11:35:02 2008 +0200
29064 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
29066 In case of several PCI USB controllers on a board this variable
29067 specifys which controller to use.
29068 See doc/README.generic_usb_ohci for details.
29070 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29072 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
29073 Author: Sergei Poselenov <sposelenov@emcraft.com>
29074 Date: Tue May 27 10:36:07 2008 +0200
29076 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
29078 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29080 commit 83e9d7a2614d4006b92690afa3390c291734267e
29081 Author: Sergei Poselenov <sposelenov@emcraft.com>
29082 Date: Mon May 26 18:16:04 2008 +0200
29084 Socrates: Config file cleanup.
29086 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29088 commit 602cac1389b755b223272f2328a47e6f8c240848
29089 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29090 Date: Sat May 24 12:47:46 2008 +0200
29092 MAKEALL: add at91 list
29094 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29096 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
29097 Author: Ron Madrid <ron_madrid@sbcglobal.net>
29098 Date: Fri May 23 15:37:05 2008 -0700
29100 Add Marvell 88E1118 support for TSEC
29102 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
29103 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
29105 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
29106 Author: Jens Gehrlein <sew_s@tqs.de>
29107 Date: Mon May 5 14:06:11 2008 +0200
29109 smc911x: add 16 bit support
29111 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
29112 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
29114 commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
29115 Author: Christian Eggers <ceggers@gmx.de>
29116 Date: Wed May 21 21:29:10 2008 +0200
29118 Fix endianess conversion in usb_ohci.c
29120 Sorry, I forgot this line:
29122 Signed-off-by: Christian Eggers <ceggers@gmx.de>
29124 I think this must be swapped (result may be equal).
29126 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
29127 Author: Christian Eggers <ceggers@gmx.de>
29128 Date: Wed May 21 22:12:00 2008 +0200
29130 USB: replace old swap_ with proper endianess conversion macros
29132 Signed-off-by: Christian Eggers <ceggers@gmx.de>
29133 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29135 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
29136 Author: Christian Eggers <ceggers@gmx.de>
29137 Date: Wed May 21 21:29:10 2008 +0200
29139 Fix endianess conversion in usb_ohci.c
29141 Signed-off-by: Christian Eggers <ceggers@gmx.de>
29142 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29144 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
29145 Author: Sergei Poselenov <sposelenov@emcraft.com>
29146 Date: Thu May 22 01:15:53 2008 +0200
29148 USB: add support for multiple PCI OHCI controllers
29150 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
29151 In case of several PCI USB controllers on a board this variable
29152 specifys which controller to use.
29154 Also add USB support for sokrates board.
29156 See doc/README.generic_usb_ohci for details.
29158 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29159 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29161 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
29162 Author: Wolfgang Denk <wd@denx.de>
29163 Date: Wed May 21 16:56:08 2008 +0200
29165 Fix some whitespace issues
29167 introduced by 53677ef18 "Big white-space cleanup."
29169 Signed-off-by: Wolfgang Denk <wd@denx.de>
29171 commit 4416603aeb06861b468b06a981e52c3ff805db7b
29172 Author: York Sun <yorksun@freescale.com>
29173 Date: Mon May 12 14:36:39 2008 -0500
29175 Make ads5121 out-of-tree compiling safe
29177 Reuse the existing DIU driver in board/freescale/common.
29179 Signed-off-by: York Sun <yorksun@freescale.com>
29181 commit 0e1bad47cd345c76c91a64caf41011e431b62599
29182 Author: York Sun <yorksun@freescale.com>
29183 Date: Mon May 5 10:20:01 2008 -0500
29185 Adding DIU support for Freescale 5121ADS
29187 Add DIU and cfb console support to FSL 5121ADS board.
29189 Use #define CONFIG_VIDEO in config file to enable fb console.
29191 Signed-off-by: York Sun <yorksun@freescale.com>
29193 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
29194 Author: York Sun <yorksun@freescale.com>
29195 Date: Mon May 5 10:20:00 2008 -0500
29197 Replace DPRINTF with debug
29199 Remove DPRINTF macro and replace it with generic debug macro.
29201 Signed-off-by: York Sun <yorksun@freescale.com>
29203 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
29204 Author: York Sun <yorksun@freescale.com>
29205 Date: Mon May 5 10:19:59 2008 -0500
29207 Move pixel clock setting to board file
29209 The clock divider has different format in 5121 and 8610. This patch moves it to
29210 board specific code.
29212 Signed-off-by: York Sun <yorksun@freescale.com>
29214 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
29215 Author: Wolfgang Denk <wd@denx.de>
29216 Date: Tue May 20 16:00:29 2008 +0200
29218 Big white-space cleanup.
29220 This commit gets rid of a huge amount of silly white-space issues.
29221 Especially, all sequences of SPACEs followed by TAB characters get
29222 removed (unless they appear in print statements).
29224 Also remove all embedded "vim:" and "vi:" statements which hide
29225 indentation problems.
29227 Signed-off-by: Wolfgang Denk <wd@denx.de>
29229 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
29230 Author: Sergei Poselenov <sposelenov@emcraft.com>
29231 Date: Thu May 8 17:46:23 2008 +0200
29233 socrates: fix second TSEC configuration (it is actually TSEC3)
29235 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29237 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
29238 Author: Sergei Poselenov <sposelenov@emcraft.com>
29239 Date: Thu May 8 14:17:08 2008 +0200
29241 Fixed reset for socrates
29243 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29245 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
29246 Author: Sergei Poselenov <sposelenov@emcraft.com>
29247 Date: Wed May 7 15:10:49 2008 +0200
29249 socrates: changes to support FDT
29251 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29252 Signed-off-by: Wolfgang Denk <wd@denx.de>
29254 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
29255 Author: Sergei Poselenov <sposelenov@emcraft.com>
29256 Date: Wed Apr 30 11:42:50 2008 +0200
29258 Initial support for "Socrates" board
29260 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
29262 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
29263 Author: Yuri Tikhonov <yur@emcraft.com>
29264 Date: Thu May 8 15:46:42 2008 +0200
29266 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
29268 This way we become able to utilize the full post_log_word for POST
29269 activities (overwise, POST ECC, which has 0x8000 ID, could be
29270 erroneously treated as started in post_output_backlog() even if there
29271 was actually no POST ECC run (because of OCM POST failure, for
29274 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
29276 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
29277 Author: Yuri Tikhonov <yur@emcraft.com>
29278 Date: Thu May 8 15:46:02 2008 +0200
29280 POST: mark OCM test as POST_STOP
29282 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
29284 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
29285 Author: Yuri Tikhonov <yur@emcraft.com>
29286 Date: Thu May 8 15:45:26 2008 +0200
29288 POST: add POST_STOP flag
29290 Don't run futher tests in case of a test fails that is marked as
29293 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
29294 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
29296 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
29297 Author: Yuri Tikhonov <yur@emcraft.com>
29298 Date: Thu May 8 15:44:16 2008 +0200
29300 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
29302 Switch the OCM testid with the codec one. The reason is that current
29303 implementation requires the POST_ROM testid to fit into lower 16
29304 bits, and the codec test will never run with POST_ROM hopefully.
29306 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
29308 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
29309 Author: Yuri Tikhonov <yur@emcraft.com>
29310 Date: Thu May 8 15:43:28 2008 +0200
29312 lwmon5: enable OCM post test on lwmon5 board
29314 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
29316 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
29317 Author: Yuri Tikhonov <yur@emcraft.com>
29318 Date: Thu May 8 15:42:47 2008 +0200
29320 POST: OCM test added.
29322 Added OCM test to POST layer. This version runs before all other tests
29323 but doesn't yet interrupt post sequence on failure.
29325 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
29326 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
29328 commit 6891260bdd935a382c95d9fa333922b0dfded68a
29329 Author: Yuri Tikhonov <yur@emcraft.com>
29330 Date: Thu May 8 15:40:39 2008 +0200
29334 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
29336 commit 727f63334676e760877d43bfb8f0e9331ac8b101
29337 Author: Hebbar <gururajakr@sanyo.co.in>
29338 Date: Tue May 20 02:16:36 2008 -0700
29340 common/usb.c: fix incorrect escape sequence
29342 Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
29344 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
29345 Author: York Sun <yorksun@freescale.com>
29346 Date: Thu May 15 15:26:27 2008 -0500
29348 Fix 8313ERDB board configuration
29350 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
29351 Correct TSEC1 vs TSEC2 assignment.
29352 Define ETHADDR and ETH1ADDR always.
29354 Signed-off-by: York Sun <yorksun@freescale.com>
29355 Signed-off-by: Timur Tabi <timur@freescale.com>
29357 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
29358 Author: Jon Loeliger <jdl@freescale.com>
29359 Date: Mon May 19 09:47:25 2008 -0500
29361 mpc86xx: Removed unused and unconfigured memory test code.
29363 Besides, other common code exists.
29365 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29367 commit 180a90abdae72587c0f679edf8991455e559440d
29368 Author: Wolfgang Denk <wd@denx.de>
29369 Date: Mon May 19 12:47:11 2008 +0200
29373 Update CHANGELOG for release.
29375 Signed-off-by: Wolfgang Denk <wd@denx.de>
29377 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
29378 Author: Stefan Roese <sr@denx.de>
29379 Date: Mon May 19 07:14:38 2008 +0200
29381 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
29383 When SATA is selected (via jumper J6) we need to disable the first PCIe
29384 node in the device tree, so that Linux doesn't initialize it. Otherwise
29385 the Linux SATA driver will fail to detect the devices.
29387 The same goes the other way around too. So if PCIe is selected we need
29388 to disable the SATA node in the device tree.
29390 This is because PCIe port 0 and SATA on 460EX share the same pins
29391 (multiplexed) and we have to configure in U-Boot which peripheral is
29394 Signed-off-by: Stefan Roese <sr@denx.de>
29396 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
29397 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29398 Date: Sun May 18 19:09:58 2008 +0200
29400 i386: Fix multiple definitions of __show_boot_progress
29402 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29404 commit 311f3446930c1e64c12026c1cfd00500b05be52d
29405 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29406 Date: Sun May 18 19:09:57 2008 +0200
29408 sc530_spunk: add missing SOBJS entry
29410 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29412 commit a559317143b4f95927b08cd388707e6f077e95fa
29413 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29414 Date: Sun May 18 19:09:56 2008 +0200
29416 sc520_spunk: Fix flash
29418 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
29419 flash.c:398: error: label at end of compound statement
29421 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29423 commit 91f221317af64191ee8caf303ea9305943158691
29424 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29425 Date: Sun May 18 19:09:49 2008 +0200
29427 drivers/pcmcia: add missing i82365
29429 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29431 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
29432 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29433 Date: Sun May 18 19:09:47 2008 +0200
29435 i386/bootm: remove unused var
29437 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29439 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
29440 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29441 Date: Sun May 18 19:09:45 2008 +0200
29443 example/gitignore: update with all generated examples
29445 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29447 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
29448 Author: Wolfgang Denk <wd@denx.de>
29449 Date: Thu May 15 00:42:45 2008 +0200
29451 TQM8272: fix out-of-tree building
29453 ...and add to MAKEALL script
29455 Signed-off-by: Wolfgang Denk <wd@denx.de>
29457 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
29458 Author: Wolfgang Denk <wd@denx.de>
29459 Date: Wed May 14 23:34:53 2008 +0200
29461 environment: fix bug introduced by commit a8409f4f1ac8
29463 env_get_char is not a function, but a pointer to one.
29465 Signed-off-by: Wolfgang Denk <wd@denx.de>
29467 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
29468 Author: Gary Jennejohn <garyj@denx.de>
29469 Date: Wed May 14 13:39:22 2008 +0200
29471 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
29473 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
29474 use a redundant environment.
29476 Signed-off-by: Gary Jennejohn <garyj@denx.de>
29478 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
29479 Author: Wolfgang Denk <wd@denx.de>
29480 Date: Wed May 14 13:55:30 2008 +0200
29482 Fix config files for out-of-tree building
29484 Several board/<...>/config.mk files include dynamically built (by
29485 the Makefile) config files but used the wrong file name of
29486 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
29487 instead if the correct
29488 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
29490 The bug is nasty because the build result is correct for the (normal)
29491 in-tree builds, and because 'sinclude' is used no errors get raised
29492 even for out-of-tree build tests. But out-of-tree builds use an
29493 incomplete and thus usually incorrect configuration...
29495 Signed-off-by: Wolfgang Denk <wd@denx.de>
29497 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
29498 Author: Stefan Roese <sr@denx.de>
29499 Date: Wed May 14 13:40:03 2008 +0200
29501 ppc4xx: Fix bogus Canyonlands config.mk
29503 This patch fixes the canyonlands config.mk file to enable correct
29504 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
29506 Signed-off-by: Stefan Roese <sr@denx.de>
29508 commit fdd1247a66d788a3446244f6fde9955a93c26322
29509 Author: Stefan Roese <sr@denx.de>
29510 Date: Wed May 14 10:32:32 2008 +0200
29512 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
29514 Canyonlands has a file ddr2_fixed.c which needs special treatment when
29515 building in separate directory. It has to be linked to build directory
29516 otherwise it is not seen.
29518 Signed-off-by: Stefan Roese <sr@denx.de>
29520 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
29521 Author: Wolfgang Denk <wd@denx.de>
29522 Date: Wed May 14 12:22:49 2008 +0200
29524 environment: cleanup prototype declarations of env functions.
29526 Signed-off-by: Wolfgang Denk <wd@denx.de>
29528 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
29529 Author: Wolfgang Denk <wd@denx.de>
29530 Date: Wed May 14 12:21:48 2008 +0200
29532 linkstation_HGLAN: Fix out of tree building.
29534 Signed-off-by: Wolfgang Denk <wd@denx.de>
29536 commit 085551c05ca09e6c491ea11a1c6727a36776a545
29537 Author: Stefan Roese <sr@denx.de>
29538 Date: Wed May 14 10:32:32 2008 +0200
29540 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
29542 Canyonlands has a file ddr2_fixed.c which needs special treatment when
29543 building in separate directory. It has to be linked to build directory
29544 otherwise it is not seen.
29546 Signed-off-by: Stefan Roese <sr@denx.de>
29548 commit 1510b82d50615f344e89d42533e8224cce067dc0
29549 Author: Wolfgang Denk <wd@denx.de>
29550 Date: Tue May 13 23:15:52 2008 +0200
29552 Makefile: fix "error: version_autogenerated.h: No such file or directory"
29554 Signed-off-by: Wolfgang Denk <wd@denx.de>
29556 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
29557 Author: Stelian Pop <stelian@popies.net>
29558 Date: Tue May 13 17:31:24 2008 +0200
29560 Cleanup nand_info[] declaration.
29562 The nand_info array is declared as extern in several .c files.
29563 Those days, nand.h contains a reference to the array, so there is
29564 no need to declare it elsewhere.
29566 Signed-off-by: Stelian Pop <stelian@popies.net>
29567 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29569 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
29570 Author: Stefan Roese <sr@denx.de>
29571 Date: Tue May 13 20:22:01 2008 +0200
29573 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
29575 Signed-off-by: Stefan Roese <sr@denx.de>
29577 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
29578 Author: Wolfgang Denk <wd@denx.de>
29579 Date: Mon May 12 01:11:21 2008 +0200
29581 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
29583 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
29584 which broke many PowerPC boards.
29586 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
29587 Author: Wolfgang Denk <wd@denx.de>
29588 Date: Mon May 12 00:56:28 2008 +0200
29590 Revert "Avoid initrd and logbuffer area overlaps"
29592 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
29593 which breaks building on all PPC boards that don't use a log buffer.
29595 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
29596 Author: Nick Spence <nick.spence@freescale.com>
29597 Date: Sat May 10 14:02:04 2008 -0700
29599 Fix offset calculation for multi-type legacy images.
29601 Calculation of tail was incorrect when size % 4 == 0.
29603 New code removes the conditional and does the same thing but with arithmetic
29605 Signed-off-by: Nick Spence <nick.spence@freescale.com>
29607 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
29608 Author: Wolfgang Denk <wd@denx.de>
29609 Date: Mon May 12 00:40:58 2008 +0200
29611 Revert "Change env_get_char from a global function ptr to a function."
29613 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
29614 which is known to break booting from dataflash and NAND.
29616 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
29617 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29618 Date: Sun May 11 23:13:57 2008 +0200
29620 API: remove duplicate syscall check
29622 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29624 commit 67e3beb52c320b0a31cf030716c99392cde2d532
29625 Author: Stelian Pop <stelian@popies.net>
29626 Date: Fri May 9 21:46:51 2008 +0200
29628 AT91: Cleanup unused config header file definitions.
29630 CONFIG_ENV_OVERWRITE is commented out in the config header files,
29631 so let's cleanup the files by removing the whole definition.
29633 Signed-off-by: Stelian Pop <stelian@popies.net>
29634 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29636 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
29637 Author: Stelian Pop <stelian@popies.net>
29638 Date: Thu May 8 14:52:34 2008 +0200
29640 Support AT91CAP9 revC CPUs
29642 The AT91CAP9 revC CPU has a few differences over the previous,
29643 revB CPU which was distributed in small quantities only (revA was
29644 an internal Atmel product only).
29646 The revC silicon needs a special initialisation sequence to
29647 switch from the internal (imprecise) RC oscillator to the
29648 external 32k clock.
29650 Signed-off-by: Stelian Pop <stelian@popies.net>
29651 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29653 commit 098b7b4b441b12c2a64dd517930f43c793542759
29654 Author: Stelian Pop <stelian@popies.net>
29655 Date: Thu May 8 14:52:33 2008 +0200
29657 Use custom logo for Atmel boards
29659 This patch adds a custom vendor logo for the Atmel AT91 boards.
29661 Signed-off-by: Stelian Pop <stelian@popies.net>
29662 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29664 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
29665 Author: Stelian Pop <stelian@popies.net>
29666 Date: Thu May 8 14:52:32 2008 +0200
29668 AT91SAM9RLEK: hook up the ATMEL LCD driver
29670 This patch makes the necessary adaptations (PIO configurations and
29671 defines in config header file) to hook up the Atmel LCD driver to the
29672 AT91SAM9RLEK board.
29674 Signed-off-by: Stelian Pop <stelian@popies.net>
29675 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29677 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
29678 Author: Stelian Pop <stelian@popies.net>
29679 Date: Thu May 8 14:52:31 2008 +0200
29681 AT91SAM9263EK: hook up the ATMEL LCD driver
29683 This patch makes the necessary adaptations (PIO configurations and
29684 defines in config header file) to hook up the Atmel LCD driver to the
29685 AT91SAM9263EK board.
29687 Signed-off-by: Stelian Pop <stelian@popies.net>
29688 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29690 commit 820f2a958325061a446115f3035e48e4726b3390
29691 Author: Stelian Pop <stelian@popies.net>
29692 Date: Thu May 8 14:52:30 2008 +0200
29694 AT91SAM9261EK: hook up the ATMEL LCD driver
29696 This patch makes the necessary adaptations (PIO configurations and
29697 defines in config header file) to hook up the Atmel LCD driver to the
29698 AT91SAM9261EK board.
29700 Signed-off-by: Stelian Pop <stelian@popies.net>
29701 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29703 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
29704 Author: Stelian Pop <stelian@popies.net>
29705 Date: Thu May 8 14:52:29 2008 +0200
29707 AT91CAP9ADK: hook up the ATMEL LCD driver
29709 This patch makes the necessary adaptations (PIO configurations and
29710 defines in config header file) to hook up the Atmel LCD driver to the
29713 Signed-off-by: Stelian Pop <stelian@popies.net>
29714 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29716 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
29717 Author: Stelian Pop <stelian@popies.net>
29718 Date: Fri May 9 21:57:18 2008 +0200
29720 Add ATMEL LCD driver
29722 This patch adds support for the ATMEL LCDC driver which is used on some
29723 AT91 and AVR platforms.
29725 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
29726 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
29728 Signed-off-by: Stelian Pop <stelian@popies.net>
29729 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29731 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
29732 Author: Stelian Pop <stelian@popies.net>
29733 Date: Thu May 8 18:52:25 2008 +0200
29735 AT91SAM9RLEK support
29737 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
29740 Signed-off-by: Stelian Pop <stelian@popies.net>
29741 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29743 commit 8e429b3eee23927c1222679f6b6f53667b21595c
29744 Author: Stelian Pop <stelian@popies.net>
29745 Date: Thu May 8 18:52:23 2008 +0200
29747 AT91SAM9263EK support
29749 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
29752 Signed-off-by: Stelian Pop <stelian@popies.net>
29753 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29755 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
29756 Author: Stelian Pop <stelian@popies.net>
29757 Date: Thu May 8 20:52:22 2008 +0200
29759 AT91SAM9261EK support
29761 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
29764 Signed-off-by: Stelian Pop <stelian@popies.net>
29765 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29767 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
29768 Author: Stelian Pop <stelian@popies.net>
29769 Date: Thu May 8 20:52:21 2008 +0200
29771 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
29773 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
29774 in order to cope with the changes in DataFlash partitionning scheme
29777 Signed-off-by: Stelian Pop <stelian@popies.net>
29778 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29780 commit 96996ac25d5222611a8888968db6e53a6d3726da
29781 Author: Stelian Pop <stelian@popies.net>
29782 Date: Thu May 8 20:52:20 2008 +0200
29784 AT91SAM9260EK: Normalize BOOTARGS
29786 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
29787 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
29790 Signed-off-by: Stelian Pop <stelian@popies.net>
29791 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29793 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
29794 Author: Stelian Pop <stelian@popies.net>
29795 Date: Thu May 8 20:52:19 2008 +0200
29797 AT91SAM9260EK: Normalize SPI timings
29799 This patch changes the SPI timings to closely match the ones
29800 used by the Linux kernel and the Atmel's own bootstrap project.
29802 Signed-off-by: Stelian Pop <stelian@popies.net>
29803 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29805 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
29806 Author: Stelian Pop <stelian@popies.net>
29807 Date: Thu May 8 20:52:18 2008 +0200
29809 AT91SAM9260EK: Handle 8 or 16 bit NAND
29811 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
29812 makes the support configurable in the board config header file
29813 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
29815 Signed-off-by: Stelian Pop <stelian@popies.net>
29816 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29818 commit ab52640fc01624e208424e527af0b7b3a5a65a12
29819 Author: Stelian Pop <stelian@popies.net>
29820 Date: Thu May 8 20:52:17 2008 +0200
29822 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
29824 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
29825 in order to cope with the changes in DataFlash partitionning scheme
29828 Signed-off-by: Stelian Pop <stelian@popies.net>
29829 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29831 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
29832 Author: Stelian Pop <stelian@popies.net>
29833 Date: Thu May 8 20:52:16 2008 +0200
29835 AT91CAP9ADK: Normalize BOOTARGS
29837 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
29838 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
29841 Signed-off-by: Stelian Pop <stelian@popies.net>
29842 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29844 commit 93da48b910511911ce110656e17ed733c8ac4c45
29845 Author: Stelian Pop <stelian@popies.net>
29846 Date: Thu May 8 20:52:15 2008 +0200
29848 AT91CAP9ADK: Normalize SPI timings
29850 This patch changes the SPI timings to closely match the ones
29851 used by the Linux kernel and the Atmel's own bootstrap project.
29853 Signed-off-by: Stelian Pop <stelian@popies.net>
29854 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29856 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
29857 Author: Stelian Pop <stelian@popies.net>
29858 Date: Thu May 8 20:52:14 2008 +0200
29860 AT91CAP9ADK: Handle 8 or 16 bit NAND
29862 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
29863 makes the support configurable in the board config header file
29864 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
29866 Signed-off-by: Stelian Pop <stelian@popies.net>
29867 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29869 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
29870 Author: Stelian Pop <stelian@popies.net>
29871 Date: Thu May 8 20:52:13 2008 +0200
29873 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
29875 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
29876 below avoids the duplication of u-boot.lds by putting the file in the
29877 cpu directory instead of the board one.
29879 Signed-off-by: Stelian Pop <stelian@popies.net>
29880 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29882 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
29883 Author: Stelian Pop <stelian@popies.net>
29884 Date: Thu May 8 20:52:12 2008 +0200
29886 Add proper copyright notices in Atmel boards Makefiles
29888 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
29889 copyright notice. This patch adds the missing pieces.
29891 Signed-off-by: Stelian Pop <stelian@popies.net>
29892 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29894 commit e817a042cef6164bf26fee86f90326f2ec9e6745
29895 Author: Stelian Pop <stelian@popies.net>
29896 Date: Thu May 8 20:52:11 2008 +0200
29898 Add copyright information in Atmel boards partition.c
29900 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
29901 the new created files. This patch fixes the problem.
29903 Signed-off-by: Stelian Pop <stelian@popies.net>
29904 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29906 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
29907 Author: Stelian Pop <stelian@popies.net>
29908 Date: Thu May 8 20:52:10 2008 +0200
29910 Update origin and copyright information in arch-at91sam9 header files
29912 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
29913 copied from the Linux kernel sources. This patch explicitly specifies
29914 this origin for all the copied headers, and for those missing copyright
29915 information, adds it.
29917 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
29918 in the latest kernel sources by 'at91sam9_smc.h'.
29920 The copyright information has been confirmed by the AT91 Linux kernel
29921 maintainer, Andrew Victor <avictor.za@gmail.com>.
29923 Signed-off-by: Stelian Pop <stelian@popies.net>
29924 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29926 commit 79dd1712689d6a5031d7cbff54957049680751c7
29927 Author: Markus Klotzbücher <mk@denx.de>
29928 Date: Thu May 8 16:00:55 2008 +0200
29930 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
29932 When using dhcp/bootp the "netmask" environment variable is not set
29933 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
29934 desireable, so the following patch adds this this option to the board
29937 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29938 Signed-off-by: Stefan Roese <sr@denx.de>
29940 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
29941 Author: Stefan Roese <sr@denx.de>
29942 Date: Sat May 10 10:30:36 2008 +0200
29944 ppc4xx: Update Makalu defconfig to use device-tree booting as default
29946 This patch reworks the default environment on Makalu. Now "net_nfs" for
29947 example uses the device-tree style booting formerly know as "net_nfs_fdt".
29948 Also the addresses in RAM were changed because of the new image booting
29949 support, which check for image overwriting. So the addresses needed to
29952 Signed-off-by: Stefan Roese <sr@denx.de>
29954 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
29955 Author: Becky Bruce <bgill@freescale.com>
29956 Date: Wed May 7 13:28:16 2008 -0500
29958 PPC: fix map_physmem build warning
29960 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
29961 enabled. This quiets the warning.
29963 Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
29965 commit 36f32675f40292002ee1fed252c180a43022d2d4
29966 Author: Becky Bruce <bgill@freescale.com>
29967 Date: Wed May 7 13:24:57 2008 -0500
29969 Update pci code to use phys_addr_t
29971 Physical addrs need to be represented by phys_addr_t, not
29972 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
29973 are going to fail mightily.
29975 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
29977 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
29978 Author: Nick Spence <nick.spence@freescale.com>
29979 Date: Thu May 8 22:32:22 2008 -0700
29981 Support legacy multi-type images without FDT section.
29983 This patch enables legacy multi-type images containing only a Linux kernel
29984 and root file system to be loaded, maintaining compatibility with previous
29985 versions of u-boot.
29987 This is required when using old image files such as a Linux 2.4 kernel /
29990 Signed-off-by: Nick Spence <nick.spence@freescale.com>
29991 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
29993 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
29994 Author: Wolfgang Denk <wd@denx.de>
29995 Date: Sat May 10 00:38:02 2008 +0200
29999 Signed-off-by: Wolfgang Denk <wd@denx.de>
30001 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
30002 Author: Wolfgang Denk <wd@denx.de>
30003 Date: Sat May 10 00:36:09 2008 +0200
30005 post/cpu/ppc4xx/Makefile: line length cleanup
30007 Signed-off-by: Wolfgang Denk <wd@denx.de>
30009 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
30010 Author: Stelian Pop <stelian@popies.net>
30011 Date: Thu May 8 22:52:09 2008 +0200
30013 Fix @ -> <at> substitution
30015 When applying the AT91CAP9 patches upstream, something transformed
30016 the '@' character into the ' <at> ' sequence.
30018 The patch below restores the original form in all the places where
30019 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
30020 were copied from AT91CAP9, and a couple of other files where the
30021 ' <at> ' sequence was present).
30023 Signed-off-by: Stelian Pop <stelian@popies.net>
30025 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
30026 Author: Stelian Pop <stelian@popies.net>
30027 Date: Thu May 8 22:52:10 2008 +0200
30029 Update origin and copyright information in arch-at91sam9 header files
30031 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
30032 copied from the Linux kernel sources. This patch explicitly specifies
30033 this origin for all the copied headers, and for those missing copyright
30034 information, adds it.
30036 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
30037 in the latest kernel sources by 'at91sam9_smc.h'.
30039 The copyright information has been confirmed by the AT91 Linux kernel
30040 maintainer, Andrew Victor <avictor.za@gmail.com>.
30042 Signed-off-by: Stelian Pop <stelian@popies.net>
30044 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
30045 Author: Stelian Pop <stelian@popies.net>
30046 Date: Thu May 8 22:52:11 2008 +0200
30048 Add copyright information in Atmel boards partition.c
30050 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
30051 the new created files. This patch fixes the problem.
30053 Signed-off-by: Stelian Pop <stelian@popies.net>
30055 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
30056 Author: Guennadi Liakhovetski <lg@denx.de>
30057 Date: Thu May 8 10:09:27 2008 +0200
30059 mx31ads: fix 32kHz clock handling
30061 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
30062 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
30063 Also fix a typo when verifying a jumper configuration. While at it, make
30064 two needlessly global functions static.
30066 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30068 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
30069 Author: Marian Balakowicz <m8@semihalf.com>
30070 Date: Wed May 7 13:10:04 2008 +0200
30072 Avoid initrd and logbuffer area overlaps
30074 Add logbuffer to reserved LMB areas to prevent initrd allocation
30075 from overlaping with it.
30077 Make sure to use correct logbuffer base address.
30079 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
30081 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
30082 Author: Marian Balakowicz <m8@semihalf.com>
30083 Date: Wed May 7 13:08:54 2008 +0200
30085 ppc: Cleanup get_effective_memsize() use
30087 Removed duplicated effective memory size calculation code.
30089 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
30091 commit 273c37d843d5b581090378016cd12dd9c586907b
30092 Author: Marian Balakowicz <m8@semihalf.com>
30093 Date: Wed May 7 09:03:53 2008 +0200
30095 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
30097 Recent modifcations to LOGBUFFER handling code were incorrecly
30098 introduced to fit_check_kernel() routine during
30099 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
30100 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
30102 This patch cleans up this merge issue.
30104 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
30106 commit bc11756daff89a3de09ca80adac962b88cf06e6e
30107 Author: Grant Erickson <gerickson@nuovations.com>
30108 Date: Tue May 6 20:16:15 2008 -0700
30110 Propagate Error Status to the Shell on fw_printenv Errors
30112 Changed implementation such that fw_printenv returns failure status
30113 when one or more specified variables do not exist or when incorrect
30114 command syntax is used.
30116 This aids scripting fw_printenv such that the script can key of the
30117 return status rather than relying on standard error "scraping".
30119 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
30120 Signed-off-by: Wolfgang Denk <wd@denx.de>
30122 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
30123 Author: Grant Erickson <gerickson@nuovations.com>
30124 Date: Tue May 6 16:18:00 2008 -0700
30126 Fix Compilation Errors with 'tools/env/fw_printenv'
30128 In the current top-of-tree, 1.3.3.-rc2, the optional tool
30129 'tools/env/fw_printenv' fails to compile for two reasons:
30131 1) The header watchdog.h cannot be found.
30132 2) The header zlib.h is picked up from the tool chain rather than the
30133 project causing a prototype conflict for crc32.
30135 This patch addresses both of these issues.
30137 Platforms Tested On:
30140 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
30142 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
30143 Author: James Yang <James.Yang@freescale.com>
30144 Date: Mon May 5 10:22:53 2008 -0500
30146 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
30148 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
30149 work before relocating to RAM because command history is written into
30150 a global array that is not writable before relocation. This patch
30151 defers to the no-editing and no-history code in readline_into_buffer()
30152 if it is called before relocation.
30154 Signed-off-by: James Yang <James.Yang@freescale.com>
30155 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30157 commit 726c0f1e5f108dccea052965123b95837d2bd402
30158 Author: Detlev Zundel <dzu@denx.de>
30159 Date: Mon May 5 16:11:22 2008 +0200
30161 cosmetic: Adjust coding style for switch statements to be consistent
30163 Signed-off-by: Detlev Zundel <dzu@denx.de>
30165 commit 574b319512b13e10800f0045e39b993f4ca25e42
30166 Author: Detlev Zundel <dzu@denx.de>
30167 Date: Mon May 5 16:11:21 2008 +0200
30169 Fix disk type output in disk/part.c
30171 Signed-off-by: Detlev Zundel <dzu@denx.de>
30173 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
30174 Author: Vlad Lungu <vlad.lungu@windriver.com>
30175 Date: Mon May 5 14:20:03 2008 +0300
30177 Mail address change, documentation modified
30179 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
30181 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
30182 Author: Michal Simek <monstr@monstr.eu>
30183 Date: Sun May 4 15:42:41 2008 +0200
30185 microblaze: Repare intc handling
30187 Signed-off-by: Michal Simek <monstr@monstr.eu>
30189 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
30190 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30191 Date: Sun May 4 15:17:52 2008 +0200
30193 include/gitignore: update to all architectures
30195 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30197 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
30198 Author: Marcel Ziswiler <marcel@ziswiler.com>
30199 Date: Mon May 5 02:12:06 2008 +0200
30201 ide: Remove spurious second include of io.h
30203 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
30205 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30207 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
30208 Author: Adrian Filipi <adrian.filipi@eurotech.com>
30209 Date: Tue May 6 16:46:37 2008 -0400
30213 This patch fixes three typos.
30214 The first is a repetition of CONFIG_CMD_BSP.
30215 The second makes the #endif comment match its #if.
30216 The third is a spelling error.
30218 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
30220 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
30221 Author: Grant Erickson <gerickson@nuovations.com>
30222 Date: Sun May 4 16:45:01 2008 -0700
30224 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
30226 Add support for the recognition of 'powerpc' as an alias for the PowerPC
30227 architecture type since Linux is already trending in that direction,
30228 preferring 'powerpc' to 'ppc'.
30230 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
30232 commit f5a24259190c388c2527bdc49fee34577d862cc7
30233 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
30234 Date: Fri May 2 13:35:15 2008 -0700
30236 7450 and 86xx L2 cache invalidate bug corrections
30238 The 7610 and related parts have an L2IP bit in the L2CR that is
30239 monitored to signal when the L2 cache invalidate is complete whereas the
30240 7450 and related parts utilize L2I for this purpose. However, the
30241 current code does not account for this difference. Additionally the 86xx
30242 L2 cache invalidate code used an "andi" instruction where an "andis"
30243 instruction should have been used.
30245 This patch addresses both of these bugs.
30247 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
30248 Acked-By: Jon Loeliger <jdl@freescale.com>
30250 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
30251 Author: Wolfgang Denk <wd@denx.de>
30252 Date: Fri May 9 10:16:13 2008 +0200
30254 Avoid infinite loop "Generating include/autoconf.mk"
30256 Fix a bogus circular dependency that caused an infinite loop of
30257 "Generating include/autoconf.mk" again and again.
30259 Signed-off-by: Wolfgang Denk <wd@denx.de>
30261 commit 567fb852178dbf59529d7301620a3f3732a4b02d
30262 Author: Stelian Pop <stelian@popies.net>
30263 Date: Thu May 8 22:52:09 2008 +0200
30265 Fix @ -> <at> substitution
30267 When applying the AT91CAP9 patches upstream, something transformed
30268 the '@' character into the ' <at> ' sequence.
30270 The patch below restores the original form in all the places where
30271 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
30272 were copied from AT91CAP9, and a couple of other files where the
30273 ' <at> ' sequence was present).
30275 Signed-off-by: Stelian Pop <stelian@popies.net>
30276 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30278 commit 73ccb3410a0785593cda7aee455dfc51f790e281
30279 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
30280 Date: Mon Apr 28 14:04:32 2008 +0200
30282 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
30284 Signed-off-by: Gary Jennejohn <garyj@denx.de>
30285 Signed-off-by: Stefan Roese <sr@denx.de>
30287 commit ef2642625cbfb1c3695e3478d08ae515052a4950
30288 Author: Stefan Roese <sr@denx.de>
30289 Date: Thu May 8 11:10:46 2008 +0200
30291 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
30293 Signed-off-by: Stefan Roese <sr@denx.de>
30295 commit a00eccfebc954ad9485161efeca7d9aaf626d530
30296 Author: Stefan Roese <sr@denx.de>
30297 Date: Thu May 8 11:05:15 2008 +0200
30299 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
30301 This patch adds fdt (flattened device tree) support to all remaining AMCC
30302 eval boards. Most newer boards already support device tree. With this patch,
30303 all AMCC boards now enable device tree passing from U-Boot to Linux
30304 arch/powerpc kernels.
30306 Signed-off-by: Stefan Roese <sr@denx.de>
30308 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
30309 Author: Stefan Roese <sr@denx.de>
30310 Date: Thu May 8 11:01:09 2008 +0200
30312 ppc4xx: Add weak default ft_board_setup() routine
30314 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
30315 This routine is defined as weak and can be overwritten by a board specific
30318 Signed-off-by: Stefan Roese <sr@denx.de>
30320 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
30321 Author: Stefan Roese <sr@denx.de>
30322 Date: Thu May 8 10:48:58 2008 +0200
30324 ppc4xx: acadia: Add fdt support and fix section overlap problem
30326 This patch adds fdt (flattened device tree) support to the AMCC
30327 Acadia eval board. This increases the image size and it doesn't
30328 fit anymore into 256kByte. Since we didn't want to remove features
30329 from the configuration, we decided to increase the U-Boot image size
30330 (add one flash sector).
30332 Also changed the default environment definition to make it
30333 independent of such changes.
30335 Signed-off-by: Stefan Roese <sr@denx.de>
30337 commit 4adb3023de75bc150f088c8935db340930ad38c8
30338 Author: Ira Snyder <iws@ovro.caltech.edu>
30339 Date: Tue Apr 29 11:18:54 2008 -0700
30341 ppc4xx: Add device tree support to AMCC Yosemite
30343 Add support for booting with a device tree blob. This is needed to boot
30344 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
30345 via the ethaddr variable.
30347 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
30348 Signed-off-by: Stefan Roese <sr@denx.de>
30350 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
30351 Author: Dave Mitchell <dmitchell@amcc.com>
30352 Date: Wed May 7 09:00:23 2008 -0700
30354 ppc4xx: Fix typos in 460GT/EX FBDV array
30356 Corrected two typos in the 460GT/EX FBDV array.
30358 Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
30359 Signed-off-by: Stefan Roese <sr@denx.de>
30361 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
30362 Author: Andy Fleming <afleming@freescale.com>
30363 Date: Wed May 7 16:54:31 2008 -0500
30365 85xx: Limit CPU2 workaround to parts that have the errata
30367 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
30368 Signed-off-by: Andy Fleming <afleming@freescale.com>
30370 commit a5fe514e8ace564300d2c1d73846ddff49654243
30371 Author: Lee Nipper <lee.nipper@freescale.com>
30372 Date: Fri Apr 25 15:44:45 2008 -0500
30374 mpc83xx: system performance settings for MPC8349EMDS.
30376 These same settings are used on MPC8349ITX, and
30377 improve performance on MPC8349EMDS.
30379 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
30380 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30382 commit 49387dba910e485640b575e920ee463b7e611dc3
30383 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30384 Date: Tue May 6 13:22:52 2008 +0900
30386 [MIPS] cpu/mips/cache.S: Fix build warning
30388 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
30389 warns illegal global symbol references by bal (and jal also) instruction.
30390 This does not happen with the latest binutils v2.18.
30392 Here's an example on gth2_config:
30394 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
30395 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
30396 c -EB -c -o cache.o cache.S
30397 cache.S: Assembler messages:
30398 cache.S:243: Warning: Pretending global symbol used as branch target is local.
30399 cache.S:250: Warning: Pretending global symbol used as branch target is local.
30401 In principle, gas might be sensitive to global symbol references in PIC
30402 code because they should be processed through GOT (global offset table).
30403 But if `bal' instruction is used, it results in PC-based offset jump.
30404 This is the cause of this warning.
30406 In practice, we know it doesn't matter whether PC-based reference or GOT-
30407 based. As for this case, both will work before/after relocation. But let's
30410 This patch explicitly sets up a target address, then jump there.
30411 Here's an example of disassembled code with/without this patch.
30413 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
30414 9000066c: ac80fffc sw zero,-4(a0)
30415 90000670: 01402821 move a1,t2
30416 -90000674: 0411ffba bal 90000560 <mips_init_icache>
30417 -90000678: 01803021 move a2,t4
30418 -9000067c: 01602821 move a1,t3
30419 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
30420 -90000684: 01a03021 move a2,t5
30421 -90000688: 03000008 jr t8
30422 -9000068c: 00000000 nop
30423 +90000674: 01803021 move a2,t4
30424 +90000678: 8f8f83ec lw t7,-31764(gp)
30425 +9000067c: 01e0f809 jalr t7
30426 +90000680: 00000000 nop
30427 +90000684: 01602821 move a1,t3
30428 +90000688: 01a03021 move a2,t5
30429 +9000068c: 8f8f81e0 lw t7,-32288(gp)
30430 +90000690: 01e0f809 jalr t7
30431 +90000694: 00000000 nop
30432 +90000698: 03000008 jr t8
30433 +9000069c: 00000000 nop
30435 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30437 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
30438 Author: Vlad Lungu <vlad.lungu@windriver.com>
30439 Date: Mon May 5 14:04:00 2008 +0300
30441 Allow building mips versions with ELDK 3.1.1
30443 .gpword works only with local symbols on certain binutils versions
30445 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
30447 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
30448 Author: Wolfgang Denk <wd@denx.de>
30449 Date: Mon May 5 12:52:36 2008 +0200
30451 MAKEALL: add inka4x0 board
30453 Signed-off-by: Wolfgang Denk <wd@denx.de>
30455 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
30456 Author: Wolfgang Denk <wd@denx.de>
30457 Date: Sun May 4 21:34:23 2008 +0200
30459 kb9202 board: fix build problem.
30461 Signed-off-by: Wolfgang Denk <wd@denx.de>
30463 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
30464 Author: Wolfgang Denk <wd@denx.de>
30465 Date: Sun May 4 12:10:33 2008 +0200
30467 Prepare for v1.3.3-rc3
30469 Update ChNAGELOG, minor white space cleanup.
30471 Signed-off-by: Wolfgang Denk <wd@denx.de>
30473 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
30474 Author: Wolfgang Denk <wd@denx.de>
30475 Date: Sun May 4 00:35:15 2008 +0200
30477 drivers/net/tsec.c: Fix typo.
30479 Signed-off-by: Wolfgang Denk <wd@denx.de>
30481 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
30482 Author: Mike Frysinger <vapier@gentoo.org>
30483 Date: Fri May 2 21:45:12 2008 -0400
30485 version_autogenerated.h: use printf rather than echo -n
30487 Some systems are dumb and do not implement the -n flag to echo (like OS X).
30488 Convert the Makefile to use printf as this should work everywhere.
30490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30491 Signed-off-by: Wolfgang Denk <wd@denx.de>
30493 commit 4acc2a108ad0a669165924704a6cb083f9138242
30494 Author: Mike Frysinger <vapier@gentoo.org>
30495 Date: Fri May 2 18:17:50 2008 -0400
30497 fix building when saveenv is disabled in some setups
30499 If you enable environment in the flash, but disable the embedded
30500 option, and you disable the saveenv command, then the #if nested
30501 logic will trigger a compile failure:
30502 env_flash.c: In function 'env_relocate_spec':
30503 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
30504 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
30506 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30508 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
30509 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
30510 Date: Fri May 2 16:10:04 2008 -0400
30512 SBC8548: fix address mask to allow 64M flash
30514 Fix incorrect mask to enable all 64MB of onboard flash.
30515 Previously U-Boot incorrectly mapped only 8MB of flash, this
30516 patch correctly maps all the available flash.
30518 Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
30520 commit 3648085c464c8c22ef76fab006ca4344d3796124
30521 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30522 Date: Fri May 2 19:48:56 2008 +0200
30524 qemu_mips: add README
30526 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30528 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
30529 Author: Marcel Ziswiler <marcel@ziswiler.com>
30530 Date: Fri May 2 02:35:59 2008 +0200
30532 Fix misspelled comment
30534 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30536 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
30537 Author: Mike Frysinger <vapier@gentoo.org>
30538 Date: Thu May 1 04:13:05 2008 -0400
30540 mkimage: make mmap() checks consistent
30542 The mmap() related code is full of inconsistent casts/constants when
30543 it comes to error checking, and may break when building on some
30544 systems (like ones that do not implicitly define the caddr_t type).
30545 Let's just avoid the whole mess by writing the code nice and clean in
30548 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30550 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
30551 Author: Marcel Ziswiler <marcel@ziswiler.com>
30552 Date: Thu May 1 09:05:34 2008 +0200
30554 Fix defined but not used build warning
30556 - warning: 'srom' defined but not used
30558 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30560 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
30561 Author: Marcel Ziswiler <marcel@ziswiler.com>
30562 Date: Thu May 1 09:05:26 2008 +0200
30564 Fix implicit declaration build warnings
30566 - warning: implicit declaration of function ‘serial_initialize’
30568 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30570 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
30571 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
30572 Date: Tue Apr 29 19:18:32 2008 +0200
30574 TSEC: add config options for VSC8601 RGMII PHY
30576 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
30577 and Tx clock lines. They are configured using 2 bits in extended
30579 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
30580 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
30582 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
30583 Acked-by: Andy Fleming <afleming@freescale.com>
30584 Acked-by: Ben Warren <biggerbadderben@gmail.com>
30587 drivers/net/tsec.c | 6 ++++++
30588 drivers/net/tsec.h | 3 +++
30589 2 files changed, 9 insertions(+), 0 deletions(-)
30591 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
30592 Author: Wolfgang Denk <wd@denx.de>
30593 Date: Sat May 3 23:07:15 2008 +0200
30595 Revert "ColdFire: Get information from the correct GCC"
30597 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
30598 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
30600 commit c4e5f52a58d278eebb87f476e353972c5dacea40
30601 Author: Wolfgang Denk <wd@denx.de>
30602 Date: Sat May 3 22:25:00 2008 +0200
30604 config.mk: use correct (cross) compiler
30606 Some config.mk files reference $(CC) to test for specific tool chain
30607 features, so make sure $(CC) gets set before including any such
30610 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
30613 Signed-off-by: Wolfgang Denk <wd@denx.de>
30615 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
30616 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30617 Date: Thu May 1 02:13:44 2008 +0200
30619 pxa: fix previous definition on cpu init
30621 start.S:183:1: warning: "ICMR" redefined
30622 In file included from start.S:33:
30623 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
30624 start.S:187:1: warning: "RCSR" redefined
30627 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30629 commit 6d12e697de794d700767f22f950e3026ccf4daf6
30630 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30631 Date: Thu May 1 02:13:43 2008 +0200
30633 pxa: fix pcmcia operation on 'i' may be undefined
30635 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30636 Signed-off-by: Wolfgang Denk <wd@denx.de>
30638 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
30639 Author: Kumar Gala <galak@kernel.crashing.org>
30640 Date: Wed Apr 30 16:24:35 2008 -0500
30642 MPC8610HPCD: Drop -O2 from the build flags
30644 Make the flags use -Os like all other boards
30646 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30648 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
30649 Author: Stefan Roese <sr@denx.de>
30650 Date: Wed Apr 30 15:50:39 2008 +0200
30652 RTC: Fix month offset by one problem in M41T62 RTC driver
30654 This patch fixes a problem with the month being read and written
30655 incorrectly (offset by one). This only gets visible by also using
30656 the Linux driver (rtc-m41t80).
30658 Tested on AMCC Canyonlands.
30660 Signed-off-by: Stefan Roese <sr@denx.de>
30662 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
30663 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30664 Date: Sat May 3 13:51:44 2008 +0900
30666 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
30668 Current trick to pick up GNU assembler minor version uses a dot(.) as a
30669 delimiter, and take the second field to obtain minor version number. But
30670 as can be expected, this doesn't work with a version string which has
30671 dots more than needs.
30675 $ mips-linux-gnu-as --version | grep 'GNU assembler'
30676 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
30677 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
30681 This patch restricts the version format to 2.XX.XX... This will work
30684 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
30686 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
30690 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30692 commit ea638951acead7f1086c908c0b9f086beab82a22
30693 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30694 Date: Sat May 3 13:51:28 2008 +0900
30696 [MIPS] cpu/mips/cache.S: Add dcache_enable
30698 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
30699 "allow ports to override bootelf behavior") requires ports to have this
30702 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30703 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30705 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
30706 Author: Wolfgang Denk <wd@denx.de>
30707 Date: Thu May 1 21:30:16 2008 +0200
30709 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
30711 Onenand needs a version of memcpy() which performs 16 bit accesses
30712 only; make sure the name does not conflict with the standard
30715 Signed-off-by: Wolfgang Denk <wd@denx.de>
30717 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
30718 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30719 Date: Wed Apr 30 22:38:17 2008 +0200
30721 cmd_nand: fix warning: str2long ncompatible pointer type
30723 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30725 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
30726 Author: Timur Tabi <timur@freescale.com>
30727 Date: Fri Apr 4 11:16:11 2008 -0500
30729 Fix calculation of I2C clock for some 86xx chips
30731 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
30732 There is no pattern that can be used to determine which chips use which
30733 frequency, so the only way to determine is to look up the actual SOC
30734 designation and use the right value for that SOC.
30736 Signed-off-by: Timur Tabi <timur@freescale.com>
30738 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
30739 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
30740 Date: Wed Apr 30 12:11:19 2008 -0500
30742 ColdFire: Fix ethernet hang issue for mcf547x_8x
30744 The ethernet hang is caused by receiving buffer in DRAM is not
30745 yet ready due to access cycles require longer time in DRAM.
30746 Relocate DMA buffer descriptors from DRAM to internal SRAM.
30748 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
30750 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
30751 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
30752 Date: Wed Apr 30 12:10:47 2008 -0500
30754 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
30756 Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
30757 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
30759 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
30760 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
30761 Date: Wed Apr 30 12:10:23 2008 -0500
30763 ColdFire: Get information from the correct GCC
30765 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
30766 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
30768 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
30769 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
30770 Date: Wed Apr 30 18:02:59 2008 +0200
30772 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
30776 nv_nand.c: In function 'saveenv':
30777 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
30778 env_nand.c: In function 'env_relocate_spec':
30779 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
30781 if compiled for davinci_schmoogie_config.
30783 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
30784 Ack by: Sergey Kubushyn <ksi@koi8.net>
30786 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
30787 Author: Anatolij Gustschin <agust@denx.de>
30788 Date: Wed Apr 30 13:34:40 2008 +0200
30790 Fix warnings while compiling net/net.c for MPC8610HPCD board
30792 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
30793 causing overriding default -Os option. New gcc (ver. 4.2.2)
30794 produces warnings while compiling net/net.c file with -O2
30795 option. The patch is an attempt to fix this.
30797 Signed-off-by: Anatolij Gustschin <agust@denx.de>
30799 commit 58b575e575c25fdf8c88141e145db201f3092149
30800 Author: Sascha Laue <Sascha.Laue@gmx.biz>
30801 Date: Wed Apr 30 15:23:38 2008 +0200
30803 lwmon5: fix offset error in sysmon0 POST
30805 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
30806 Signed-off-by: Wolfgang Denk <wd@denx.de>
30808 commit e7419b243a373de4ee042f7d4f45f66de787240d
30809 Author: Sascha Laue <Sascha.Laue@gmx.biz>
30810 Date: Wed Apr 30 15:16:35 2008 +0200
30812 lwmon5: fix manual merge error in POST
30814 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
30816 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
30817 Author: Wolfgang Denk <wd@denx.de>
30818 Date: Wed Apr 30 17:46:26 2008 +0200
30820 cmd_nand.c: fix another 'incompatible pointer type' warning.
30822 Signed-off-by: Wolfgang Denk <wd@denx.de>
30824 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
30825 Author: Wolfgang Denk <wd@denx.de>
30826 Date: Wed Apr 30 17:25:07 2008 +0200
30828 Makefile: fix parallel builds
30830 This problem shows up with parallel builds only; it results in
30831 somewhat cryptic error messages like
30833 $ JOBS=-j6 MAKEALL netstar
30834 Configuring for netstar board...
30835 arm-linux-ld: cannot find -lgeneric
30836 make[1]: *** [eeprom.srec] Error 1
30838 A few boards (like netstar and voiceblue) need some libraries for
30839 building; however, the board Makefile does not contain any such
30840 dependencies which may cause problems with parallel builds. Adding
30841 such dependencies is difficult as we would also have to provide build
30842 rules, which already exist in the respective library Makefiles.
30844 To solve this, we make sure that all libraries get built before the
30847 Signed-off-by: Wolfgang Denk <wd@denx.de>
30849 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
30850 Author: Stefan Roese <sr@denx.de>
30851 Date: Wed Apr 30 14:51:36 2008 +0200
30853 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
30855 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
30856 used for NAND booting to match the values needed for the new 512MB
30857 DIMM modules shipped with the productions boards:
30859 Crucial: CT6464AC667.8FB
30861 Signed-off-by: Stefan Roese <sr@denx.de>
30863 commit ea9202a659dc75996facf1475f1866a19a9d3129
30864 Author: Stefan Roese <sr@denx.de>
30865 Date: Wed Apr 30 10:49:43 2008 +0200
30867 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
30869 This patch fixes a problem with DIMMs that have 8 banks. Now the
30870 MCIF0_MBxCF register will be setup correctly for this setup too.
30872 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
30874 Signed-off-by: Stefan Roese <sr@denx.de>
30876 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
30877 Author: Wolfgang Denk <wd@denx.de>
30878 Date: Tue Apr 29 23:41:06 2008 +0200
30880 Prepare v1.3.3-rc2, again.
30882 Signed-off-by: Wolfgang Denk <wd@denx.de>
30884 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
30885 Author: Wolfgang Denk <wd@denx.de>
30886 Date: Tue Apr 29 23:35:24 2008 +0200
30890 Signed-off-by: Wolfgang Denk <wd@denx.de>
30892 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
30893 Author: Wolfgang Denk <wd@denx.de>
30894 Date: Tue Apr 29 23:32:20 2008 +0200
30896 common/env_nand.c: fix one more incompatible pointer type issue
30898 Signed-off-by: Wolfgang Denk <wd@denx.de>
30900 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
30901 Author: Wolfgang Denk <wd@denx.de>
30902 Date: Tue Apr 29 21:33:08 2008 +0200
30904 post/board/lwmon5/sysmon.c: fix manual merge error.
30906 Signed-off-by: Wolfgang Denk <wd@denx.de>
30908 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
30909 Author: Kumar Gala <galak@kernel.crashing.org>
30910 Date: Tue Apr 29 12:54:59 2008 -0500
30912 85xx: Add -mno-spe to e500/85xx builds
30914 Newer gcc's might be configured to enable autovectorization by default.
30915 If we happen to build with one of those compilers we will get SPE
30916 instructions in random code.
30918 -mno-spe disables the compiler for automatically generating SPE
30919 instructions without our knowledge.
30921 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30923 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
30924 Author: Kumar Gala <galak@kernel.crashing.org>
30925 Date: Tue Apr 29 10:18:34 2008 -0500
30927 Update .gitignore for zlib.h
30929 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30931 commit 45239cf4152109caa925145ccd433529902df887
30932 Author: Kumar Gala <galak@kernel.crashing.org>
30933 Date: Tue Apr 29 10:27:08 2008 -0500
30935 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
30937 All the 85xx and 86xx UM describe the register as timing_cfg_3
30940 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30942 commit ef7d30b14394e4c4a153118f5845760cadada02a
30943 Author: Kumar Gala <galak@kernel.crashing.org>
30944 Date: Tue Apr 29 10:28:34 2008 -0500
30946 85xx/86xx: Rename DDR init address and init extended address register
30948 Rename init_addr and init_ext_addr to match the docs between
30949 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
30951 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30953 commit cf6cc014270549684873a5972d2595052c468cb6
30954 Author: Kumar Gala <galak@kernel.crashing.org>
30955 Date: Mon Apr 28 02:24:04 2008 -0500
30957 85xx: Additional fixes and cleanup of MP code
30959 * adjust __spin_table alignment to match ePAPR v0.94 spec
30960 * loop over all cpus when determing who is up. This fixes an issue if
30961 the "boot cpu" isn't core0. The "boot cpu" will already be in the
30962 cpu_up_mask so there is no harm
30963 * Added some protection in the code to ensure proper behavior. These
30964 changes are explicitly needed but don't hurt:
30965 - Added eieio to ensure the "hot word" of the table is written after
30966 all other table updates have occurred.
30967 - Added isync to ensure we don't prefetch loading of table entries
30968 until we a released
30970 These issues we raised by Dave Liu.
30972 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30974 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
30975 Author: Yuri Tikhonov <yur@emcraft.com>
30976 Date: Tue Apr 29 15:06:41 2008 +0200
30978 lwmon5: minor clean-up to include/configs/lwmon5.h
30980 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
30981 the CFG_DSPIC_TEST_ADDR definition more readable.
30983 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30985 commit f4c4d21a885ccc222fd0acdf653b683249e85117
30986 Author: Stefan Roese <sr@denx.de>
30987 Date: Tue Apr 29 16:08:05 2008 +0200
30989 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
30991 Signed-off-by: Stefan Roese <sr@denx.de>
30993 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
30994 Author: Yuri Tikhonov <yur@emcraft.com>
30995 Date: Tue Apr 29 13:32:45 2008 +0200
30997 ppc flush_cache: add watch-dog triggering into the loops.
30999 Some boards (e.g. lwmon5) need rather a frequent watch-dog
31000 kicking. Since the time it takes for the flush_cache() function
31001 to complete its job depends on the size of data being flushed, one
31002 may encounter watch-dog resets on such boards when, for example,
31003 download big files over ethernet.
31005 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31007 commit cab99d6f3281ab6784feccf98b9b425daa58418a
31008 Author: Stefan Roese <sr@denx.de>
31009 Date: Tue Apr 29 14:44:54 2008 +0200
31011 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
31013 Signed-off-by: Stefan Roese <sr@denx.de>
31015 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
31016 Author: Stefan Roese <sr@denx.de>
31017 Date: Tue Apr 29 14:12:07 2008 +0200
31019 ppc4xx: Fix Katmai CFG_MONITOR_LEN
31021 Signed-off-by: Stefan Roese <sr@denx.de>
31023 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
31024 Author: Stefan Roese <sr@denx.de>
31025 Date: Tue Apr 29 13:57:07 2008 +0200
31027 ppc4xx: Complete remove bogus dflush()
31029 Since the current dflush() implementation is know to have some problems
31030 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
31031 it by using clean_dcache_range().
31033 Tested on Katmai with ECC DIMM.
31035 Signed-off-by: Stefan Roese <sr@denx.de>
31037 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
31038 Author: Stefan Roese <sr@denx.de>
31039 Date: Tue Apr 29 13:36:51 2008 +0200
31041 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
31043 As it seems the "old" ECC initialization routine by using dflush() didn't
31044 write all lines in the dcache back to memory on lwmon5. This could lead
31045 to ECC error upon Linux booting. This patch changes the program_ecc()
31046 routine to now use clean_dcache_range() instead of dflush().
31047 clean_dcache_range() uses dcbst which is exactly what we want in this
31050 Since dflush() is known is cause problems, this routine will be
31051 removed completely and replaced by clean_dcache_range() with an
31054 Signed-off-by: Stefan Roese <sr@denx.de>
31056 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
31057 Author: Yuri Tikhonov <yur@emcraft.com>
31058 Date: Mon Apr 28 18:19:34 2008 +0200
31060 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
31062 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31064 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
31065 Author: Markus Brunner <super.firetwister@googlemail.com>
31066 Date: Mon Apr 28 08:47:47 2008 +0200
31068 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
31070 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
31071 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
31074 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
31076 commit 2ef7503a593c77a80c2a054011970227c4b62774
31077 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31078 Date: Thu Apr 24 07:57:17 2008 +0200
31080 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
31082 Move non-inlied functions into specific drivers file
31083 Set get_prom as weak
31085 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31086 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
31087 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31089 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
31090 Author: Guennadi Liakhovetski <lg@denx.de>
31091 Date: Thu Apr 3 17:04:19 2008 +0200
31093 net: make ARP timeout configurable
31095 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
31096 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
31097 to the boards get lost, which typically are ARP replies. By configuring
31098 the timeout to a lower value we significantly improve the first network
31099 transfer time on this board. The timeout is specified in milliseconds,
31100 later internally it is converted to deciseconds, because it has to be
31101 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
31104 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31105 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31107 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
31108 Author: Guennadi Liakhovetski <lg@denx.de>
31109 Date: Thu Apr 3 13:36:18 2008 +0200
31111 minor cs8900 driver clean up
31113 Remove a redundant register definition, clean up some coding style
31116 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31117 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31119 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
31120 Author: Wolfgang Denk <wd@denx.de>
31121 Date: Mon Apr 28 22:01:04 2008 +0200
31123 jffs2_1pass.c: fix incompatible pointer type warning
31125 Signed-off-by: Wolfgang Denk <wd@denx.de>
31127 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
31128 Author: Sascha Laue <Sascha.Laue@gmx.biz>
31129 Date: Tue Apr 1 10:10:18 2008 +0200
31131 lwmon5: update dsPIC POST spezification
31133 The specification for the lwmon5 board dsPIC POST got changed.
31134 Also add defines for the temperatures and voltages.
31136 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
31138 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
31139 Author: Sascha Laue <Sascha.Laue@gmx.biz>
31140 Date: Tue Apr 1 15:13:03 2008 +0200
31142 Fix watchdog POST for lwmon5
31144 If the hardware watchdog detects a voltage error, the watchdog sets
31145 GPIO62 to low. The watchdog POST has to detect this low level.
31147 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
31148 Signed-off-by: Wolfgang Denk <wd@denx.de>
31150 commit dd5748bcd669f46aeb6686c1b341323843738ccc
31151 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31152 Date: Mon Apr 28 14:37:14 2008 +0200
31154 rtl8169: fix compiler warnings
31156 Fix multiple compiler warnings related to argument type mismatch.
31158 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31160 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
31161 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31162 Date: Mon Apr 28 14:36:06 2008 +0200
31164 IDE: fix compiler warnings
31166 The IDE driver can use 32-bit addresses in LBA mode, in which case it
31167 spits multiple warnings during compilation. Fix them.
31169 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31171 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
31172 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31173 Date: Mon Apr 28 14:35:57 2008 +0200
31175 LinkStation: fix compiler warning, add a maintainer
31177 out_8 wants a pointer to an unsigned as the first argument. Add a
31178 maintainer for Linkstation boards.
31180 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31182 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
31183 Author: Wolfgang Denk <wd@denx.de>
31184 Date: Mon Apr 28 14:55:12 2008 +0200
31186 cmd_nand.c: fix "differ in signedness" problem
31188 Signed-off-by: Wolfgang Denk <wd@denx.de>
31190 commit f2c288a35341ad02ac03b1563d786763c9c8f159
31191 Author: Wolfgang Denk <wd@denx.de>
31192 Date: Mon Apr 28 12:48:47 2008 +0200
31194 pcnet.c: fix a merge issue
31196 Signed-off-by: Wolfgang Denk <wd@denx.de>
31198 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
31199 Author: Wolfgang Denk <wd@denx.de>
31200 Date: Mon Apr 28 12:08:18 2008 +0200
31202 NAND: fix some strict-aliasing compiler warnings
31204 Signed-off-by: Wolfgang Denk <wd@denx.de>
31206 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
31207 Author: Stefan Roese <sr@denx.de>
31208 Date: Mon Apr 28 11:37:14 2008 +0200
31210 ppc4xx: Fix compile warning of hcu4 board
31212 Signed-off-by: Stefan Roese <sr@denx.de>
31214 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
31215 Author: Wolfgang Denk <wd@denx.de>
31216 Date: Mon Apr 28 11:31:23 2008 +0200
31218 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
31220 Signed-off-by: Wolfgang Denk <wd@denx.de>
31222 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
31223 Author: Guennadi Liakhovetski <lg@denx.de>
31224 Date: Mon Apr 28 00:25:32 2008 +0200
31226 mx31ads: fix loadaddr environment variable define
31228 Arithmetic expressions do not get evaluated under stringification. Remove
31229 default network configuration, add DHCP command support. Thanks to Felix
31230 Radensky for reporting.
31232 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31234 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
31235 Author: Wolfgang Denk <wd@denx.de>
31236 Date: Mon Apr 28 10:55:24 2008 +0200
31238 katmai: fix section overlap problem
31240 Since we didn't want to remove features from the configuration, we
31241 decided to increase the U-Boot image size (add one flash sector).
31243 Also changed the default environment definition to make it
31244 independent of such changes.
31246 Signed-off-by: Wolfgang Denk <wd@denx.de>
31247 Acked-by: Stefan Roese <sr@denx.de>
31249 commit 941d696d25624e3cc65ebf924199541acf52d74e
31250 Author: Wolfgang Denk <wd@denx.de>
31251 Date: Mon Apr 28 10:55:24 2008 +0200
31253 katmai: fix section overlap problem
31255 Since we didn't want to remove features from the configuration, we
31256 decided to increase the U-Boot image size (add one flash sector).
31258 Also changed the default environment definition to make it
31259 independent of such changes.
31261 Signed-off-by: Wolfgang Denk <wd@denx.de>
31262 Acked-by: Stefan Roese <sr@denx.de>
31264 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
31265 Author: Kumar Gala <galak@kernel.crashing.org>
31266 Date: Sat Apr 26 11:44:44 2008 -0500
31268 post: Fix building with O=
31270 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31272 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
31273 Author: Wolfgang Denk <wd@denx.de>
31274 Date: Sat Apr 26 01:55:00 2008 +0200
31278 Signed-off-by: Wolfgang Denk <wd@denx.de>
31280 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
31281 Author: Wolfgang Denk <wd@denx.de>
31282 Date: Sat Apr 26 01:25:39 2008 +0200
31284 post/Makefile: make sure to use the correct flags
31286 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
31287 messages to be printed.
31289 Signed-off-by: Wolfgang Denk <wd@denx.de>
31291 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
31292 Author: Wolfgang Denk <wd@denx.de>
31293 Date: Sat Apr 26 00:34:42 2008 +0200
31295 Coding Style cleanup, update CHANGELOG
31297 Signed-off-by: Wolfgang Denk <wd@denx.de>
31299 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
31300 Author: Magnus Lilja <lilja.magnus@gmail.com>
31301 Date: Sun Apr 20 10:38:12 2008 +0200
31303 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
31305 This patch enables SPI and MC13783/RTC support for the Litekit board.
31307 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
31309 commit f97abbfb47d9e407354e157cae3f6369e460cd37
31310 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31311 Date: Fri Apr 25 01:08:32 2008 -0500
31313 MPC8544DS: decode pcie3 end-point configuration correctly.
31315 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31316 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31318 commit 292188e15523c165c4269403fdcd33c26d89176e
31319 Author: Roy Zang <tie-fei.zang@freescale.com>
31320 Date: Fri Apr 25 00:55:09 2008 -0500
31322 MPC8544DS: Removes the unknown flash message information
31324 This patch removes the unknown flash message information:
31325 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
31326 This unknown flash message is caused by PromJet.
31327 Some of the board user is unhappy with this information.
31329 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
31330 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31332 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
31333 Author: Kim Phillips <kim.phillips@freescale.com>
31334 Date: Thu Apr 24 14:07:38 2008 -0500
31336 mpc83xx: bump loadaddr over fdtaddr to 0x500000
31338 this seems as a good compromise between human memory, typing,
31339 and last but not least, to accommodate for current and future kernel bloat.
31341 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31342 Acked-by: Dave Liu <daveliu@freescale.com>
31344 commit be5a7190265a34d968578ff266549c60f6f57654
31345 Author: Dave Liu <r63238@freescale.com>
31346 Date: Tue Apr 15 13:12:23 2008 +0800
31348 mpc83xx: clean up the readme for 83xx boards
31350 1. correct the typo
31351 2. correct the memory map for 837xerdb board
31353 Signed-off-by: Dave Liu <daveliu@freescale.com>
31355 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
31356 Author: Dave Liu <r63238@freescale.com>
31357 Date: Tue Apr 15 13:11:11 2008 +0800
31359 mpc83xx: remove the unused CPM's stuff
31361 The MPC83xx family never have CPM block, so remove it from 83xx.
31363 Signed-off-by: Dave Liu <daveliu@freescale.com>
31365 commit c63ad6325a8ac0097a54b418a3288926b0484b18
31366 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31367 Date: Fri Apr 18 16:29:40 2008 +0200
31369 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
31371 This patch adds a configurable flash auto protection list that can be used
31372 to make U-Boot protect flash regions in flash_init().
31374 The idea has been discussed on the u-boot mailing list starting
31377 Even this patch brings a new feature it is used as a bugfix for 4xx
31378 platforms where flash_init() does not completely protect the
31379 monitor's flash range in all situations.
31381 U-Boot protects the flash range from CFG_MONITOR_BASE to
31382 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
31383 include the reset vector at 0xfffffffc.
31386 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
31388 This config option will auto protect the last 512k of flash that
31389 contains the bootloader on board like APC405 and PMC405.
31391 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31393 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
31394 Author: Stefan Roese <sr@denx.de>
31395 Date: Fri Apr 25 13:59:03 2008 +0200
31397 ppc4xx: Remove double defines in lwmon5.h
31399 introduced with latest lwmon5/POST merge
31401 Signed-off-by: Stefan Roese <sr@denx.de>
31403 commit 7590378fb9c686709492ceb142825cd058255956
31404 Author: Bartlomiej Sieka <tur@semihalf.com>
31405 Date: Fri Apr 25 13:54:02 2008 +0200
31407 Use watchdog-aware functions when calculating hashes of images - take two
31409 Some files didn't get updated properly with the "Use watchdog-aware
31410 functions when calculating hashes of images" commit, this commit
31413 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31414 Signed-off-by: Wolfgang Denk <wd@denx.de>
31416 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
31417 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31418 Date: Fri Apr 25 12:01:39 2008 +0200
31420 ppc4xx: Add bootcount limit handling for APC405 boards
31422 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31424 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
31425 Author: Bartlomiej Sieka <tur@semihalf.com>
31426 Date: Fri Apr 25 12:10:09 2008 +0200
31428 Use watchdog-aware functions when calculating hashes of images
31430 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31432 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
31433 Author: Wolfgang Denk <wd@denx.de>
31434 Date: Fri Apr 25 12:44:08 2008 +0200
31436 USB: fix more GCC 4.2.x aliasing warnings
31438 Signed-off-by: Wolfgang Denk <wd@denx.de>
31439 Acked-by: Markus Klotzbuecher <mk@denx.de>
31441 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
31442 Author: Wolfgang Denk <wd@denx.de>
31443 Date: Fri Apr 25 12:41:53 2008 +0200
31445 lib_generic/crc32.c: add missing #include <watchdog.h>
31447 Signed-off-by: Wolfgang Denk <wd@denx.de>
31449 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
31450 Author: Wolfgang Denk <wd@denx.de>
31451 Date: Fri Apr 25 11:52:21 2008 +0200
31453 lib_generic/crc32.c: fix compile problem
31455 Signed-off-by: Wolfgang Denk <wd@denx.de>
31457 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
31458 Author: Stefan Roese <sr@denx.de>
31459 Date: Tue Apr 22 12:20:32 2008 +0200
31461 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
31463 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
31464 environment variable will now get passed to the Linux kernel by setting
31465 the device_type property of the PCIe device tree node. For normal root-
31466 complex configuration it will keep its defaults value of "pci" and for
31467 endpoint configuration it will get changed to "pci-endpoint".
31469 Signed-off-by: Stefan Roese <sr@denx.de>
31471 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
31472 Author: Yuri Tikhonov <yur@emcraft.com>
31473 Date: Thu Apr 24 10:30:53 2008 +0200
31475 lwmon5: watchdog POST fix
31477 Use the GPT0_MASKx registers as the temporary storage for watch-dog
31478 timer POST test instead of GPT0_COMPx. The latter
31479 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
31481 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
31482 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31484 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
31485 Author: Kim Phillips <kim.phillips@freescale.com>
31486 Date: Mon Apr 21 18:10:14 2008 -0500
31488 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
31490 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
31491 proven problematic getting right from the start at least on 83xx and
31494 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31496 commit a99715b8ebfc500f3f40e01b36b64d473938443d
31497 Author: Detlev Zundel <dzu@denx.de>
31498 Date: Fri Apr 18 14:50:01 2008 +0200
31500 Realining some header definitions.
31502 Signed-off-by: Detlev Zundel <dzu@denx.de>
31504 commit 4acbc6c7f993cae409c424615415a3e76820f13d
31505 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31506 Date: Thu Apr 24 07:57:16 2008 +0200
31508 NE2000: coding style cleanup
31510 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31512 commit b4aff1ffaf7120032c653357c007faa14f74d29d
31513 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31514 Date: Wed Apr 23 00:11:47 2008 +0900
31516 qemu-mips.h: Add CFI support
31518 CONFIG_ENV_OVERWRITE is also added.
31520 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
31522 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31523 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
31525 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
31526 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
31527 Date: Tue Apr 22 22:47:27 2008 +0900
31529 doc/README.mips: Add MIPS notes
31531 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
31533 commit 215b01bba8bc662d35f72b084700b192d367dfb4
31534 Author: Bartlomiej Sieka <tur@semihalf.com>
31535 Date: Tue Apr 22 12:27:56 2008 +0200
31537 Add support for calculating hashes with watchdog triggering
31539 Implement watchodg-aware variants of hash calculation functions:
31543 The above functions calculate the hash of the input buffer in chunks,
31544 triggering the watchdog after processing each chunk. The chunk size
31545 is given as a function call parameter.
31547 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31549 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
31550 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31551 Date: Wed Apr 23 11:02:12 2008 +0900
31553 qemu-mips: Cleanup whitespace, indentation, etc.
31555 No functional change.
31557 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
31558 Then I re-created from scratch, and changed more lines than the original.
31560 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31561 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
31563 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
31564 Author: Vlad Lungu <vlad@comsys.ro>
31565 Date: Wed Oct 10 23:02:09 2007 +0300
31567 Fixed pcnet io_base
31569 Bus and phys address are not always the same
31571 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
31573 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
31574 Author: Wolfgang Denk <wd@denx.de>
31575 Date: Thu Apr 24 23:44:26 2008 +0200
31577 drivers/net/pcnet.c: Coding Style cleanup.
31579 Signed-off-by: Wolfgang Denk <wd@denx.de>
31581 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
31582 Author: Vlad Lungu <vlad@comsys.ro>
31583 Date: Wed Oct 10 23:04:23 2007 +0300
31585 Added Am79C970A chip id to pcnet
31587 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
31589 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
31590 Author: Magnus Lilja <lilja.magnus@gmail.com>
31591 Date: Sun Apr 20 10:35:03 2008 +0200
31593 i.MX31: Fix architecture numbers for ADS and Litekit boards
31595 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
31597 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
31599 commit e7ae84d6c7288790e88639f57cb60daf89c11369
31600 Author: Magnus Lilja <lilja.magnus@gmail.com>
31601 Date: Sun Apr 20 10:36:36 2008 +0200
31603 i.MX31: Use symbolic names for Litekit membases.
31605 Use symbolic names instead of hard coded addresses for Litekit membases.
31607 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
31609 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
31610 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31611 Date: Sat Apr 19 17:59:20 2008 +0200
31613 Fix show_boot_progress prototype
31615 in commit fad634071 "make show_boot_progress () weak."
31616 show_boot_progress is supposed to be declared as weak but declared as
31619 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31621 commit edbed247a14d70b94958010f736621212285de91
31622 Author: Bartlomiej Sieka <tur@semihalf.com>
31623 Date: Fri Apr 18 12:39:23 2008 +0200
31625 Memory footprint optimizations
31627 As suggested by Wolfgang Denk:
31628 - image printing functions:
31630 - remove indentation prefix from functions' signatures
31631 - merge getenv_verify and getenv_autostart into one parametrized function
31633 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31635 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
31636 Author: Guennadi Liakhovetski <lg@denx.de>
31637 Date: Tue Apr 15 13:33:11 2008 +0200
31639 MX31ADS environment variable update, spi and rtc support
31641 Update MX31ADS default environment to better match the flash layout and
31642 the memory map, support SPI and RTC.
31644 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31646 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
31647 Author: Kumar Gala <galak@kernel.crashing.org>
31648 Date: Mon Apr 21 09:28:36 2008 -0500
31650 85xx: Round up frequency calculations to get reasonable output
31652 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
31654 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
31656 Signed-off-by: Dejan Minic <minic@freescale.com>
31657 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
31658 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31659 Acked-by: Andy Fleming <afleming@freescale.com>
31661 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
31662 Author: Kumar Gala <galak@kernel.crashing.org>
31663 Date: Wed Apr 23 16:58:04 2008 -0500
31665 fsl_pci: Only modify registers if we have them
31667 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
31669 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31671 commit 83fe32334337def160b302aa9d152d808bfcc68e
31672 Author: Markus Klotzbücher <mk@denx.de>
31673 Date: Wed Apr 23 10:57:33 2008 +0200
31675 USB: remove a cpu bug workaround for an unsupported architecture.
31677 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
31679 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
31680 Author: Markus Klotzbücher <mk@denx.de>
31681 Date: Wed Apr 23 10:53:23 2008 +0200
31683 USB: fix those pesky aliasing warnings issued by gcc-4.2
31685 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
31686 Signed-off-by: Detlev Zundel <dzu@denx.de>
31688 commit 89cdab788f3716b335fefb60b836ebcf975aceab
31689 Author: Mike Frysinger <vapier@gentoo.org>
31690 Date: Mon Mar 31 11:02:01 2008 -0400
31692 crc32: use uint32_t rather than unsigned long
31694 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
31695 this is done with the build toolchain instead of the target tool
31696 chain, so if the build is a 64bit system but the target is 32bits,
31697 the size will obviously be wrong. This converts all unsigned long
31698 stuff related to crc32 to uint32_t types. Compile tested only: output
31699 of ./tools/envcrc when run on a 32bit build system matches that of a
31700 64bit build system.
31702 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
31703 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31705 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
31706 Author: Dirk Behme <dirk.behme@googlemail.com>
31707 Date: Wed Mar 26 09:53:29 2008 +0100
31709 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
31711 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
31715 - Remove *_masked() functions as noted by Wolfgang
31717 - Adapt register naming to recent TI spec (sprue26, March 2007)
31719 - Fix reset_timer() handling
31721 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
31723 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
31725 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
31727 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
31729 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
31731 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
31732 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
31734 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
31735 Author: Sergei Poselenov <sposelenov@emcraft.com>
31736 Date: Wed Apr 9 16:09:41 2008 +0200
31738 Added watchdog triggering calls in the "mtest" test function.
31740 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
31742 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
31743 Author: Yuri Tikhonov <yur@emcraft.com>
31744 Date: Sun Apr 6 19:19:14 2008 +0200
31746 lwmon5 watchdog: limit trigger rate
31748 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
31749 the CONFIG_WD_MAX_RATE value.
31751 Note that an earlier version of this patch which used microseconds
31752 instead of ticks dis not work. The problem was that we used
31753 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
31754 get_tbclk(), which in turn calls get_sys_info(). It turns out that
31755 this function does a lot of prolonged operations (like divisions)
31756 which take too much time so we do not trigger the watchdog in time,
31757 and it resets the system.
31759 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31761 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
31762 Author: Yuri Tikhonov <yur@emcraft.com>
31763 Date: Mon Mar 31 10:51:37 2008 +0200
31765 POST: move CONFIG_POST to Makefiles
31767 Introduce the new logical option CONFIG_HAS_POST which is set when the
31768 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
31769 to determine should the POST libs be compiled for the selected target
31772 To avoid breaking u-boot linking process, the empty post/libpost.a file is
31773 created for platforms which do not have POSTs.
31775 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31776 Signed-off-by: Wolfgang Denk <wd@denx.de>
31778 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
31779 Author: Yuri Tikhonov <yur@emcraft.com>
31780 Date: Mon Mar 31 10:49:34 2008 +0200
31782 POST: preparations for moving CONFIG_POST to Makefiles
31784 Remove CONFIG_POST ifdefs from the post/ source files.
31786 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31787 Signed-off-by: Wolfgang Denk <wd@denx.de>
31789 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
31790 Author: Stefan Roese <sr@denx.de>
31791 Date: Tue Apr 22 14:14:20 2008 +0200
31793 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
31795 This patch fixes the Canyonlands and Glacier default environment to better
31796 fit to the arch/powerpc device-tree kernels. The variables dealing with
31797 arch/ppc booting are removed, since these boards are supported only in
31798 arch/powerpc. Glacier uses the same config file as Canyonlands.
31800 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
31802 Signed-off-by: Stefan Roese <sr@denx.de>
31804 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
31805 Author: Stefan Roese <sr@denx.de>
31806 Date: Tue Apr 22 14:06:42 2008 +0200
31808 ppc4xx: Small coding style cleanup for the latest esd patches
31810 Signed-off-by: Stefan Roese <sr@denx.de>
31812 commit 79941d63bc03aed8c48d7602f18217cc200ee931
31813 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31814 Date: Mon Apr 21 18:01:07 2008 +0200
31816 ppc4xx: Update CPU strapping for PMC440 boards
31818 This patch removes the temporary 'test' strapping option
31819 of the sbe command. The '667' strapping option now uses
31820 a PLB/PCI divider of 3.
31822 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31824 commit f00cf3193a6635355b121e90debb2f54e777e7da
31825 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31826 Date: Mon Apr 21 14:42:21 2008 +0200
31828 ppc4xx: Remove unused APC405 strataflash driver
31830 The APC405 board support has been migrated to use the common
31833 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31835 commit 1c686676a86473bbd92151f0544e109413f6ed06
31836 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31837 Date: Mon Apr 21 14:42:17 2008 +0200
31839 ppc4xx: Update APC405 configuration
31841 - enable esd's auto_update mechanism
31842 - support alternative flash layout on rev. 1.8 boards
31843 - update default environment
31844 - use common CFI flash driver
31845 - coding style cleanup
31847 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31849 commit 0b9872515a521bf7866dc24b85ddce708e60d702
31850 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31851 Date: Mon Apr 21 14:42:11 2008 +0200
31853 ppc4xx: Update APC405 board support
31855 - enable esd's auto_update mechanism
31856 - fix LCD support on latest hardware revision (uses other LCD controller)
31857 - support alternative flash layout on rev. 1.8 boards
31858 - coding style cleanup
31860 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31862 commit 83975d02e225e231960784972e7820a8b303756b
31863 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31864 Date: Mon Apr 21 14:42:06 2008 +0200
31866 ppc4xx: update esd's common auto_update code for 405 boards
31868 - Coding style cleanup (long lines)
31869 - improve handling of protected flash regions
31872 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31874 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
31875 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31876 Date: Mon Apr 21 14:41:59 2008 +0200
31878 ppc4xx: Update esd's common LCD code for 405 boards
31880 - Coding style cleanup (long lines)
31881 - Add s1d13505 support
31882 - Make some functions return a result code instead of void
31884 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31886 commit dea68189424c3f1242427a8146a3861bf093173c
31887 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31888 Date: Mon Apr 21 11:36:55 2008 +0200
31890 ppc4xx: Update FPGA image for APC405 boards
31892 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31894 commit 2a05b152924acfcec3b037693329e517e6d3578f
31895 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31896 Date: Mon Apr 21 11:36:08 2008 +0200
31898 ppc4xx: Update bootlogo for APC405 boards
31900 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31902 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
31903 Author: Stefan Roese <sr@denx.de>
31904 Date: Fri Apr 18 16:41:31 2008 +0200
31906 ppc4xx: Add dcache_enable() for 440
31908 dcache_enable() was missing for 440 and the patch
31909 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
31910 "] behavior uses this function.
31912 Note: Currently the cache handling functions like
31913 d/icache_disable/enable() are NOP's on 440. This may be changed in the
31916 Signed-off-by: Stefan Roese <sr@denx.de>
31918 commit a49e0d177a0749614b316ec847fb623f09c82c07
31919 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31920 Date: Mon Apr 21 11:19:04 2008 +0200
31922 video: Add missing free for logo memory
31924 This patch adds two missing free()s.
31926 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31928 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
31929 Author: Troy Kisky <troy.kisky@boundarydevices.com>
31930 Date: Mon Sep 24 16:41:43 2007 -0700
31932 PATCH - Fix oob data copied into supplied buffer
31934 This patch correctly sets the oobavail variable
31935 and fixes a bug where the oob data was not valid when
31936 there where multiple groups in oobfree.
31938 First segment fixes a typo
31939 Second segment fixes a bug where oob data may be copied incorrectly.
31940 Third segment adds an error message when exiting due to write protect.
31941 Forth segment fixes a bug where oobavail may be set incorrectly.
31943 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
31945 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
31946 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31947 Date: Fri Apr 18 17:24:32 2008 +0200
31949 ppc4xx: Fix sys_get_info() for 405GP(r)
31951 This patch assigns the correct EBC clock for 405GP(r) CPUs
31952 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
31953 uses an uninitialized EBC clock in its startup message.
31955 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31957 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
31958 Author: Wolfgang Denk <wd@denx.de>
31959 Date: Sun Apr 20 15:39:38 2008 -0700
31961 Makefile: remove nand_spl/System.map when cleaning up.
31963 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
31964 Author: Wolfgang Denk <wd@denx.de>
31965 Date: Sun Apr 20 15:35:52 2008 -0700
31967 MAKEALL: sort entries / lists.
31969 Signed-off-by: Wolfgang Denk <wd@denx.de>
31971 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
31972 Author: Kumar Gala <galak@kernel.crashing.org>
31973 Date: Fri Apr 18 11:29:01 2008 -0500
31975 85xx: Fix size of cpu-release-addr property
31977 The cpu-release-addr is defined as always being a 64-bit quanity regardless
31978 if we are running on a 32-bit or 64-bit machine.
31980 commit 88353a985109562a639b2f8a0c90d77011bfe374
31981 Author: Timur Tabi <timur@freescale.com>
31982 Date: Fri Apr 4 11:15:58 2008 -0500
31984 Fix calculation of I2C clock for some 85xx chips
31986 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
31987 some use CCB/3. There is no pattern that can be used to determine which
31988 chips use which frequency, so the only way to determine is to look up the
31989 actual SOC designation and use the right value for that SOC.
31991 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
31993 Signed-off-by: Timur Tabi <timur@freescale.com>
31995 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
31996 Author: Wolfgang Denk <wd@denx.de>
31997 Date: Fri Apr 18 11:44:27 2008 -0700
31999 Fix build breakage casued by commit c0559be371b2
32001 Change env_get_char from a global function ptr to a function.
32003 Signed-off-by: Wolfgang Denk <wd@denx.de>
32005 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
32006 Author: Wolfgang Denk <wd@denx.de>
32007 Date: Fri Apr 18 10:53:41 2008 -0700
32009 Coding Style cleanup, update CHANGELOG.
32011 Signed-off-by: Wolfgang Denk <wd@denx.de>
32013 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
32014 Author: Mike Frysinger <vapier@gentoo.org>
32015 Date: Tue Apr 8 14:00:57 2008 -0400
32017 Add support for u-boot in svn and localversion-* files
32019 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32021 commit d23ff6827decf121461fbc5622612fd7effe207e
32022 Author: Guennadi Liakhovetski <lg@denx.de>
32023 Date: Thu Apr 3 17:04:22 2008 +0200
32025 MX31ADS network and flash updates
32027 This patch allows U-Boot to use buffered writes to the Spansion NOR
32028 flash installed on this board, and eliminates long delays in network
32029 transfers after the board startup.
32031 Also modify flash layout to embed main and redundant environment
32032 blocks in the U-Boot image.
32034 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32036 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
32037 Author: Guennadi Liakhovetski <lg@denx.de>
32038 Date: Mon Apr 14 10:53:12 2008 +0200
32040 Support for the MX31ADS evaluation board from Freescale
32042 This patch adds support for the MX31ADS evaluation board from Freescale,
32043 initialization code is copied from RedBoot sources, also provided by
32046 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32048 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
32049 Author: Stefan Roese <sr@denx.de>
32050 Date: Tue Apr 8 10:33:29 2008 +0200
32052 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
32054 Signed-off-by: Stefan Roese <sr@denx.de>
32056 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
32057 Author: Stefan Roese <sr@denx.de>
32058 Date: Tue Apr 8 10:33:28 2008 +0200
32060 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
32062 Signed-off-by: Stefan Roese <sr@denx.de>
32064 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
32065 Author: Stefan Roese <sr@denx.de>
32066 Date: Tue Apr 8 10:33:27 2008 +0200
32068 ppc4xx: Add Glacier NAND booting target
32070 Signed-off-by: Stefan Roese <sr@denx.de>
32072 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
32073 Author: Stefan Roese <sr@denx.de>
32074 Date: Tue Apr 8 10:31:00 2008 +0200
32076 nand_spl: Update nand_spl to support 2k page size NAND devices
32078 This patch adds support for booting from 2k page sized NAND device
32079 (e.g. Micron 29F2G08AAC).
32081 Tested on AMCC Canyonlands.
32083 Signed-off-by: Stefan Roese <sr@denx.de>
32085 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
32086 Author: Anatolij Gustschin <agust@denx.de>
32087 Date: Thu Apr 17 18:18:00 2008 +0200
32089 Fix crash on sequoia in ppc_4xx_eth_init
32091 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
32092 with cache enabled (TLB Parity exeption). This patch
32095 Signed-off-by: Anatolij Gustschin <agust@denx.de>
32097 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
32098 Author: Anatolij Gustschin <agust@denx.de>
32099 Date: Thu Apr 17 18:15:27 2008 +0200
32101 ppc4xx: Fix crash on sequoia with cache enabled
32103 Currently U-Boot crashes on sequoia board in CPU POST if
32104 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
32105 won't be disabled by change_tlb before CPU POST because
32106 there is an insufficient adress range check since
32107 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
32110 Signed-off-by: Anatolij Gustschin <agust@denx.de>
32112 commit 43c509254fab375c49936498da944658117ed07c
32113 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32114 Date: Thu Apr 17 23:35:13 2008 +0900
32116 Use jr as register jump instruction
32118 Current assembler codes are inconsistent in the way of register jump
32119 instruction usage; some use jr, some use j. Of course GNU as allows both
32120 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
32121 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
32124 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
32126 commit 7ce63709828d37b08866e537339a169bd0db2bd3
32127 Author: Guennadi Liakhovetski <lg@denx.de>
32128 Date: Tue Apr 15 14:15:30 2008 +0200
32130 RTC driver for MC13783
32132 MC13783 is a multifunction IS with an SPI interface to the host. This
32133 driver handles the RTC controller in this chip.
32135 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32137 commit 38254f45b0b412332726c90d3184ad47479fcffb
32138 Author: Guennadi Liakhovetski <lg@denx.de>
32139 Date: Tue Apr 15 14:14:25 2008 +0200
32141 New i.MX31 SPI driver
32143 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
32144 only implemented and tested on i.MX31, can with a modified register layout
32145 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
32148 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32150 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
32151 Author: Magnus Lilja <lilja.magnus@gmail.com>
32152 Date: Tue Apr 15 19:09:10 2008 +0200
32154 Fix name of i.MX31 boards in config file header
32156 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
32158 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
32160 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
32161 Author: Mike Frysinger <vapier@gentoo.org>
32162 Date: Sun Apr 13 19:42:19 2008 -0400
32164 allow ports to override go behavior
32166 Split the arch-specific logic out of the common go code and into a dedicated
32167 weak function called do_go_exec() that lives in cpu directories. This will
32168 need review from i386/nios people to make sure I didn't break them.
32170 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
32171 Author: Mike Frysinger <vapier@gentoo.org>
32172 Date: Sun Apr 13 19:42:18 2008 -0400
32174 allow ports to override bootelf behavior
32176 Change the bootelf setup function into a dedicated weak function called
32177 do_bootelf_exec. This way ports can control the behavior however they
32178 like before/after calling the ELF entry point.
32180 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
32181 Author: Ulf Samuelsson <ulf@atmel.com>
32182 Date: Sat Apr 12 20:56:03 2008 +0200
32184 Reorder ARM boards in Makefile
32186 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
32187 are no longer under ARM92xT header.
32189 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
32190 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32192 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
32193 Author: Ulf Samuelsson <ulf@atmel.com>
32194 Date: Sat Apr 12 20:29:44 2008 +0200
32196 Clean up dataflash partitioning
32198 This patch removes the board dependent parts from
32199 "drivers/mtd/dataflash.c".
32200 Each board relying on this, will have the appropriate
32201 code in a new file, "partition.c" in the board directory.
32202 board Makefiles updated to use the file.
32204 The dataflash partitions are aligned on sector/page boundaries.
32206 The CONFIG_NEW_DF_PARTITION was used to create named partitions
32207 This is now the default operation, and the CONFIG variable is removed.
32209 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
32211 commit 51ecde946fec511a16346e498204ca10ad71080d
32212 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32213 Date: Sat Apr 12 14:08:45 2008 +0200
32215 gitignore: udpate stgit generated and .patch file
32217 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32219 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
32220 Author: Wolfgang Denk <wd@denx.de>
32221 Date: Fri Apr 18 00:15:36 2008 -0700
32223 Get rid of redundant copy of renamed header file.
32225 Signed-off-by: Wolfgang Denk <wd@denx.de>
32227 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
32228 Author: Vlad Lungu <vlad@comsys.ro>
32229 Date: Fri Apr 11 21:20:14 2008 +0300
32231 Fix dependency generation for older gcc versions
32233 With gcc 3.3.3 at least, compilation fails with
32235 Generating include/autoconf.mk
32236 gcc: compilation of header file requested
32237 make: *** [include/autoconf.mk] Error 1
32239 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
32241 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
32243 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
32244 Author: Marian Balakowicz <m8@semihalf.com>
32245 Date: Fri Apr 11 11:07:49 2008 +0200
32247 Restore the ability to continue booting after legacy image overwrite
32249 Before new uImage code was merged, bootm code allowed for the kernel image to
32250 get overwritten during decompresion. new uImage introduced a check for image
32251 overwrites and refused to boot the image that got overwritten. This patch
32252 restores the old behavior. It also adds a warning when the image overwriten is
32253 a multi-image file, because in such case accessing componentes other than the
32254 first one will fail.
32256 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32258 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
32259 Author: Marian Balakowicz <m8@semihalf.com>
32260 Date: Fri Apr 11 11:07:43 2008 +0200
32262 ppc: Fix ftd_blob variable init when processing raw blob
32264 Set fdt_blob variable before its value is printed out.
32266 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
32268 commit 3d36be030043cd841a2551d00a395135e363a64b
32269 Author: Jason Wessel <jason.wessel@windriver.com>
32270 Date: Thu Apr 10 14:30:16 2008 -0500
32272 Remove all the search paths from the .lds files.
32274 The cross compiler is responsible for providing the correct libraries
32275 and the logic to find the linking libraries.
32277 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
32279 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
32280 Author: Bartlomiej Sieka <tur@semihalf.com>
32281 Date: Mon Apr 14 15:44:16 2008 +0200
32283 Boot-related documentation update
32285 - document 'bootm_low' and 'bootm_size' environment variables
32286 - update inaccurate CFG_BOOTMAPSZ entry
32288 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
32290 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
32291 Author: Guennadi Liakhovetski <lg@denx.de>
32292 Date: Wed Apr 9 17:34:08 2008 +0200
32294 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
32296 Restore logic reverted by commit
32298 commit 80767a6cead9990d9e77e62be947843c2c72f469
32299 Author: Peter Pearse <peter.pearse@arm.com>
32300 Date: Wed Sep 5 16:04:41 2007 +0100
32302 Changed API name to coloured_led.h
32303 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
32304 Tidied other cpu/arm920t/start.S code
32306 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32308 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
32309 Author: Mike Frysinger <vapier@gentoo.org>
32310 Date: Tue Apr 8 10:24:24 2008 -0400
32312 Remove conflicting NAND ID
32314 There are two NAND entries with ID 0xDC and this obviously causes problems.
32315 In the kernel, they punted the first entry, so we should do the same.
32317 See this upstream e-mail for more info:
32318 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
32320 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
32321 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32323 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
32324 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
32325 Date: Tue Apr 8 16:20:35 2008 +0900
32327 cpu/mips/cpu.c: Fix flush_cache bug
32329 Cache operations have to take line address (addr), not start_addr.
32330 I noticed this bug when debugging ping failure.
32332 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
32334 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
32335 Author: Martin Krause <martin.krause@tqs.de>
32336 Date: Thu Apr 3 14:29:01 2008 +0200
32338 TQM5200: fix default IDE reset level
32340 Before the first call of ide_reset(), the level of the IDE reset
32341 signal on the TQM5200 is low (reset asserted). This patch sets the
32342 default value to high (reset not asserted).
32344 Currently this patch fixes no real problem, but it is cleaner to
32345 assert the reset signal only on demand, and not permanently.
32347 Signed-off-by: Martin Krause <martin.krause@tqs.de>
32349 commit c61e033d6e8abb7b4060ee36060961e1399f6079
32350 Author: Detlev Zundel <dzu@denx.de>
32351 Date: Thu Apr 3 14:18:48 2008 +0200
32353 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
32355 Signed-off-by: Detlev Zundel <dzu@denx.de>
32357 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
32358 Author: Detlev Zundel <dzu@denx.de>
32359 Date: Thu Apr 3 14:18:47 2008 +0200
32361 mgcoge, mgsuv: rename 'addcon' to 'addcons'
32363 The latter name with 13 users is already established, so we will use
32366 Signed-off-by: Detlev Zundel <dzu@denx.de>
32368 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
32369 Author: Martin Krause <martin.krause@tqs.de>
32370 Date: Thu Apr 3 13:37:56 2008 +0200
32372 IDE: fix bug in reset sequence
32374 According to the ata (ata5) specification the RESET- signal
32375 shall be asserted for at least 25 us. Without this patch,
32376 the RESET- signal is asserted on some boards for only < 1 us
32377 (e. g. on the TQM5200). This patch adds a general delay of
32378 25 us to the RESET- signal.
32380 Without this patch a Platinum 4 GiB CF card is not recognised
32381 properly on boards with a TQM5200 (STK52xx, TB5200).
32383 Signed-off-by: Martin Krause <martin.krause@tqs.de>
32385 commit 813bea96a960916c72b4a3a7df840151529c26ce
32386 Author: Sascha Laue <Sascha.Laue@gmx.biz>
32387 Date: Thu Apr 3 14:43:11 2008 +0200
32389 lwmon5: disable CONFIG_ZERO_BOOTDELAY
32391 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
32393 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
32394 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32395 Date: Wed Apr 2 08:03:58 2008 +0200
32397 ds174x: Fix warning on return in rtc_get and rtc_set functions
32399 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32401 commit a253b38bf50c85227c33ca0febc870ee49d1588e
32402 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32403 Date: Wed Apr 2 08:03:57 2008 +0200
32405 cmd_log.c: Fix assignment differ in signedness
32407 In function 'logbuff_init_ptrs':
32408 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
32410 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32412 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
32413 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
32414 Date: Wed Apr 2 11:04:43 2008 +0530
32416 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
32418 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
32420 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
32421 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32422 Date: Tue Apr 1 14:07:10 2008 +0200
32424 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
32426 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32428 commit c08fb3ea36d19b1640b7906264581e9105534399
32429 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
32430 Date: Tue Apr 15 10:24:14 2008 +0200
32432 Additional PCI IDs for IDE and network controllers
32434 These PCI IDs are required by the Linkstation platforms.
32436 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
32438 commit c0559be371b2a64b1a817088c3308688e2182f93
32439 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
32440 Date: Mon Apr 14 23:01:50 2008 +0200
32442 Change env_get_char from a global function ptr to a function.
32444 This avoids an early global data reference.
32446 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
32448 commit 3e0f331c05d72f140715c1e9fca991927e44d422
32449 Author: Guennadi Liakhovetski <lg@denx.de>
32450 Date: Tue Apr 29 12:35:08 2008 +0000
32452 Clean up smsc911x driver
32454 Replace direct register address derefencing with accessor functions.
32455 Restrict explicitly 32-bit bus-width, extend affected configurations
32458 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32459 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
32461 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
32462 Author: Sascha Hauer <s.hauer@pengutronix.de>
32463 Date: Tue Apr 15 00:08:20 2008 -0400
32465 This patch adds a driver for the following smsc network controllers:
32473 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32474 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
32475 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
32477 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
32478 Author: Sascha Laue <Sascha.Laue@gmx.biz>
32479 Date: Tue Apr 1 15:13:03 2008 +0200
32481 Fix watchdog POST for lwmon5
32483 If the hardware watchdog detects a voltage error, the watchdog sets
32484 GPIO62 to low. The watchdog POST has to detect this low level.
32486 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
32488 commit 24b448448a917e52806f82660a5c9d47608894fb
32489 Author: Dave Liu <r63238@freescale.com>
32490 Date: Tue Apr 1 15:22:11 2008 +0800
32492 ata: update the libata.h from ata.h of linux kernel
32494 Current libata.h of u-boot is out of sync from linux kernel,
32495 this patch make it be consistent with linux kernel.
32497 Signed-off-by: Dave Liu <daveliu@freescale.com>
32498 Signed-off-by: Tor Krill <tor@excito.com>
32500 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
32501 Author: Kumar Gala <galak@kernel.crashing.org>
32502 Date: Mon Mar 31 11:59:27 2008 -0500
32504 Allow use of ARCH=powerpc when building
32506 The linux kernel is now mostly ARCH=powerpc, so to make life easier
32507 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
32509 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32511 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
32512 Author: Kyungmin Park <kmpark@infradead.org>
32513 Date: Mon Mar 31 10:40:54 2008 +0900
32515 Add apollon board MAINTAINERS entry
32517 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
32519 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
32520 Author: Kyungmin Park <kmpark@infradead.org>
32521 Date: Mon Mar 31 10:40:36 2008 +0900
32525 It should access with 16-bit instead of 8-bit
32527 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
32529 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
32531 commit a9da2b41079d230db3a5641625311983f85ce1fb
32532 Author: Kyungmin Park <kmpark@infradead.org>
32533 Date: Mon Mar 31 10:40:19 2008 +0900
32535 Fix OneNAND erase command
32537 It mis-calculates the block address.
32538 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
32540 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
32542 commit 61525f2ffa156665a66908fda47dbf29d65ea579
32543 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
32544 Date: Mon Mar 31 01:32:15 2008 +0200
32546 Support for LinkStation / KuroBox HD and HG PPC models
32548 This patch is based on the port by Mihai Georgian (see linkstation.c for
32549 Copyright information) and implements support for LinkStation / KuroBox HD
32550 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
32551 the moment, pending network driver fixing.
32553 Notice to users: this is pretty much a barebone port. Support for network
32554 on HG models is already in the U-Boot mainline, but you might also want
32555 patches to switch fan / phy modes depending on the negotiated ethernet
32556 parameters. This patch also doesn't support console switching, booting EM
32557 mode, Buffalo specific ext2 magic number. So, if you want to use any of
32558 those, you need additional patches. Otherwise this patche provides a fully
32559 functional u-boot with a network console on your system.
32561 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32563 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
32564 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32565 Date: Sun Mar 30 01:22:13 2008 -0500
32567 Add CONFIG_MII_INIT support to related boards
32569 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
32570 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
32571 that use mii_init() in cmd_init.c.
32573 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32574 Acked-by: Ben Warren <biggerbadderben@gmail.com>
32576 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
32577 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32578 Date: Sun Mar 30 01:19:06 2008 -0500
32580 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
32582 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
32583 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
32585 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32587 commit e99ccb488181d012248c6be30b2093e950319fc5
32588 Author: Kumar Gala <galak@kernel.crashing.org>
32589 Date: Thu Mar 27 11:46:38 2008 -0500
32591 Introduce phys_size_t and move phys_addr_t into asm/types.h
32593 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
32594 that have larger physical addresses like 44x, 85xx, and 86xx.
32596 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32598 commit 20a14a42a25f72e379f38460b8a8484667536795
32599 Author: Andy Fleming <afleming@freescale.com>
32600 Date: Wed Apr 2 16:19:07 2008 -0500
32602 Rename include/md5.h to include/u-boot/md5.h
32604 Some systems have md5.h installed in /usr/include/. This isn't the
32605 desired file (we want the one in include/md5.h). This will avoid the
32606 conflict. This fixes the host tools building problem by creating a new
32607 directory for U-Boot specific header files.
32609 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
32612 Signed-off-by: Wolfgang Denk <wd@denx.de>
32613 Signed-off-by: Andy Fleming <afleming@freescale.com>
32614 Acked-by: Timur Tabi <timur@freescale.com>
32616 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
32617 Author: Dave Liu <r63238@freescale.com>
32618 Date: Thu Mar 27 18:51:17 2008 +0800
32620 drivers: code clean up
32622 Signed-off-by: Dave Liu <daveliu@freescale.com>
32624 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
32625 Author: Dave Liu <r63238@freescale.com>
32626 Date: Thu Mar 27 18:50:41 2008 +0800
32628 drivers: clean up the ata_piix.h
32630 Signed-off-by: Dave Liu <daveliu@freescale.com>
32632 commit e8f7ba404f1409606962815ecc955a06984b08b3
32633 Author: Dave Liu <r63238@freescale.com>
32634 Date: Thu Mar 27 18:49:56 2008 +0800
32636 doc: english polishing for README.sata
32638 according to gvb's suggestion, polishing for the doc.
32640 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
32641 Signed-off-by: Dave Liu <daveliu@freescale.com>
32643 commit 3e3f766a5274d204780460e1879723b565296d34
32644 Author: Kumar Gala <galak@kernel.crashing.org>
32645 Date: Wed Mar 26 18:53:28 2008 -0500
32647 Fix warnings introduced by I2C bus speed setting patch
32649 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32651 commit 3c735e7437150e8615f26930c7819db85634276d
32652 Author: eran liberty <eran.liberty@gmail.com>
32653 Date: Thu Mar 27 00:50:49 2008 +0100
32655 Altera Stratix II support
32657 Adds Support for Altera's Stratix II.
32659 Within your board specific init file you will have to call
32661 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
32662 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
32664 Altera_desc* contines (for example):
32666 Altera_StratixII, /* part type */
32667 passive_serial, /* interface type */
32668 1, /* bytes of data part can accept */
32669 (void *)(&funcs), /* interface function table */
32670 0L, /* base interface address */
32671 0 /* implementation specific cookie */
32674 funcs is the interface. It is of type altera_board_specific_func.
32675 It looks like this:
32676 altera_board_specific_func func = {
32687 you will have to implement these functions, which is usually bit
32690 Signed-off-by: Eran Liberty <liberty@extricom.com>
32692 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
32693 Author: Wolfgang Denk <wd@denx.de>
32694 Date: Sun Apr 13 14:32:54 2008 -0700
32698 Signed-off-by: Wolfgang Denk <wd@denx.de>
32700 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
32701 Author: Sascha Hauer <s.hauer@pengutronix.de>
32702 Date: Wed Mar 26 20:41:17 2008 +0100
32704 Phytec Phycore-i.MX31 support
32706 This patch adds support for the Phytec Phycore-i.MX31 board
32708 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32709 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32711 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
32712 Author: Sascha Hauer <s.hauer@pengutronix.de>
32713 Date: Wed Mar 26 20:41:09 2008 +0100
32715 mx31 litekit support
32717 This patch adds support for the mx31 litekit board
32719 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32720 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32722 commit cdace0661208754a53019ea0dc7b803a040e0939
32723 Author: Sascha Hauer <s.hauer@pengutronix.de>
32724 Date: Wed Mar 26 20:40:49 2008 +0100
32726 add an i2c driver for mx31
32728 This patch adds an i2c driver for Freescale i.MX processors
32730 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32731 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32733 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
32734 Author: Sascha Hauer <s.hauer@pengutronix.de>
32735 Date: Wed Mar 26 20:40:42 2008 +0100
32737 core support for Freescale mx31
32739 This patch adds the core support for Freescale mx31
32741 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32742 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32744 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
32745 Author: Wolfgang Denk <wd@denx.de>
32746 Date: Sun Apr 13 14:19:23 2008 -0700
32750 ...as suggested by Peter Pearse
32752 Signed-off-by: Wolfgang Denk <wd@denx.de>
32754 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
32755 Author: Sascha Hauer <s.hauer@pengutronix.de>
32756 Date: Wed Mar 26 20:40:36 2008 +0100
32758 Separate omap24xx specific code from arm1136
32760 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
32761 to cpu/arm1136/omap24xx.
32763 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32764 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32766 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
32767 Author: Mike Frysinger <vapier@gentoo.org>
32768 Date: Tue Jan 29 18:21:05 2008 -0500
32770 disable caches before booting an app for Blackfin apps
32772 It isn't generally save to execute applications outside of U-Boot with caches
32773 enabled due to the way the Blackfin processor handles caches (requires
32774 software assistance). This patch disables caches before booting an ELF or
32775 just booting raw code. The previous discussion on the patch was that we
32776 wanted to use weaks instead, but that proved to not be feasible when multiple
32777 symbols are involved, which puts us back at the ifdef solution. I've
32778 minimized the ugliness by moving the setup step outside of the main function.
32780 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32782 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
32783 Author: Wolfgang Denk <wd@denx.de>
32784 Date: Sun Apr 13 10:03:54 2008 -0700
32786 ppc: Get rid of unused machine type definitions
32788 Signed-off-by: Wolfgang Denk <wd@denx.de>
32790 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
32791 Author: Wolfgang Denk <wd@denx.de>
32792 Date: Sun Apr 13 09:59:26 2008 -0700
32794 Coding Style cleanup; update CHANGELOG
32796 Signed-off-by: Wolfgang Denk <wd@denx.de>
32798 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
32799 Author: Larry Johnson <lrj@acm.org>
32800 Date: Thu Feb 21 13:58:11 2008 -0500
32802 LM73 bug fix for negative temperatures and cleanup
32804 When the LM73 temperature sensor measures a temperature below 0 C, the
32805 current driver does not perform sign extension, so the result returned is
32806 512 C too high. This patch fixes the problem, and does general cleanup
32809 Signed-off-by: Larry Johnson <lrj@acm.org>
32811 commit 96ef831f713289afba19da0c8f905e99da2b23e0
32812 Author: Guennadi Liakhovetski <lg@denx.de>
32813 Date: Thu Apr 3 13:36:02 2008 +0200
32815 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
32817 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
32818 series require different addresses for buffered write commands. Define a
32819 configuration option to support buffered writes on those chips. A more
32820 elegant solution would be to automatically detect those chips by parsing
32821 their CFI records, but that would require introduction of a fixup table
32822 into the cfi_flash driver.
32824 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32826 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
32827 Author: Lee Nipper <lee.nipper@freescale.com>
32828 Date: Thu Apr 10 09:35:06 2008 -0500
32830 mpc83xx: Update DIMM data bus width test to support 40-bit width
32832 32-bit wide ECC memory modules report 40-bit width.
32833 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
32835 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
32836 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32838 commit 5fb5a689d822ca61e814bd523fc930af335242fa
32839 Author: Dave Liu <r63238@freescale.com>
32840 Date: Mon Mar 31 17:05:12 2008 +0800
32842 mpc83xx: Fix the bug of serdes initialization
32844 Currently the serdes will not be initializated due to the
32847 Signed-off-by: Dave Liu <daveliu@freescale.com>
32848 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32850 commit 2000784818f043db7ca60e2846a72d097766b894
32851 Author: Dave Liu <r63238@freescale.com>
32852 Date: Thu Apr 3 16:28:29 2008 +0800
32854 mpc83xx: Fix the SATA clock setting of 837x targets
32856 Currently the SATA controller clock is configured as CSB clock,
32857 usually the CSB clock is 400/333/266MHz.
32859 However, The SATA IP block is only guaranteed to operate up to
32860 200 MHz as stated in the HW spec.
32862 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
32864 This patch makes the SATA clock as half of CSB clock.
32866 Signed-off-by: Dave Liu <daveliu@freescale.com>
32867 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32869 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
32870 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32871 Date: Wed Apr 2 13:41:21 2008 +0200
32873 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
32875 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32878 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
32879 Author: Kumar Gala <galak@kernel.crashing.org>
32880 Date: Wed Apr 9 04:20:57 2008 -0500
32882 85xx: Fix detection of MP cpu spin up
32884 We were looking at the wrong memory offset to determine of a secondary
32885 cpu had been spun up or not. Also added a warning message if the
32886 all the secondary cpus we expect don't spin up.
32888 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32890 commit f3e04bdc3f360c66801a9048956e61e41a16edba
32891 Author: Kumar Gala <galak@kernel.crashing.org>
32892 Date: Tue Apr 8 10:45:50 2008 -0500
32894 85xx: Use SVR_SOC_VER instead of SVR_VER
32896 The recent change introduced by 'Update SVR numbers to expand support'
32897 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
32898 to compare against a particular processor id.
32900 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32902 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
32903 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
32904 Date: Fri Apr 11 10:00:35 2008 -0400
32906 ppc4xx: Fix power mgt definitions for PPC440
32908 Corrected DCR addresses of PPC440EP power management registers.
32910 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
32912 commit 950a392464e616b4590bc4501be46e2d7d162dea
32913 Author: Wolfgang Denk <wd@denx.de>
32914 Date: Fri Apr 11 15:11:26 2008 +0200
32916 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
32918 Reverting became necessary after it turned out that the patches in
32919 the u-boot-arm repo were modified, and in some cases corrupted.
32921 This reverts the following commits:
32923 066bebd6353e33af3adefc3404560871699e9961
32924 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
32925 c88ae20580b2b01487b4cdcc8b2a113f551aee36
32926 a147e56f03871bba4f05058d5e04ce7deb010b04
32927 d6674e0e2a6a1f033945f78838566210d3f28c95
32928 8c8463cce44d849e37744749b32d38e1dfb12e50
32929 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
32930 8bf69d81782619187933a605f1a95ee1d069478d
32931 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
32932 a574a73852a527779234e73e17e7597fd8128882
32933 1377b5583a48021d983e1fd565f7d40c89e84d63
32934 1704dc20917b4f71e373e2c888497ee666d40380
32936 Signed-off-by: Wolfgang Denk <wd@denx.de>
32938 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
32939 Author: Stefan Roese <sr@denx.de>
32940 Date: Fri Apr 11 07:02:29 2008 +0200
32942 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
32944 This patch reworks the default environment on Kilauea/Haleakala. Now
32945 "net_nfs" for exmaple uses the device-tree style booting formerly know
32946 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
32947 new image booting support, which check for image overwriting. So the
32948 addresses needed togeet adjusted.
32950 Signed-off-by: Stefan Roese <sr@denx.de>
32952 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
32953 Author: Stefan Roese <sr@denx.de>
32954 Date: Wed Apr 9 11:58:02 2008 +0200
32956 ppc4xx: Fix Canyonlands default environment to work with new image support
32958 Since the new image support checks for image overwriting, the default
32959 environment needs to get adjusted to use correct addresses.
32961 Signed-off-by: Stefan Roese <sr@denx.de>
32963 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
32964 Author: Stefan Roese <sr@denx.de>
32965 Date: Wed Apr 9 11:54:11 2008 +0200
32967 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
32969 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
32970 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
32971 on 4xx systems _start currently cannot be used for this calculation.
32972 So revert back to the original version for now.
32974 Signed-off-by: Stefan Roese <sr@denx.de>
32976 commit f91374f65eae8b42cac329e06ba1c54728278efb
32977 Author: Michal Simek <monstr@monstr.eu>
32978 Date: Fri Mar 28 12:49:52 2008 +0100
32980 microblaze: Sort microblaze boards in MAKEALL script
32982 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
32983 Author: Michal Simek <monstr@monstr.eu>
32984 Date: Fri Mar 28 11:58:45 2008 +0100
32986 microblaze: clean microblaze_config.mk
32988 FLAGS are generated by U-BOOT generator.
32989 Board specific FLAGS are in board directory
32991 Signed-off-by: Michal Simek <monstr@monstr.eu>
32993 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
32994 Author: Michal Simek <monstr@monstr.eu>
32995 Date: Fri Mar 28 12:47:19 2008 +0100
32997 microblaze: xupv2p fix config file for supporting FDT
32999 commit 188dc16b189143573b1ed90e584bf866d75cdd12
33000 Author: Michal Simek <monstr@monstr.eu>
33001 Date: Fri Mar 28 11:53:02 2008 +0100
33003 microblaze: ml401 fix config file for supporting FDT
33005 Signed-off-by: Michal Simek <monstr@monstr.eu>
33007 commit 4c6a6f02e239236261333759997eeaf86b30b54c
33008 Author: Michal Simek <monstr@monstr.eu>
33009 Date: Fri Mar 28 11:22:48 2008 +0100
33011 microblaze: ml401 - add ifdef for GPIO
33013 Signed-off-by: Michal Simek <monstr@monstr.eu>
33015 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
33016 Author: Michal Simek <monstr@monstr.eu>
33017 Date: Fri Mar 28 12:13:03 2008 +0100
33019 microblaze: clean uart16550 and uartlite handling
33021 Signed-off-by: Michal Simek <monstr@monstr.eu>
33023 commit 0b20f250877441460fb79d72192954abe8498834
33024 Author: Michal Simek <monstr@monstr.eu>
33025 Date: Fri Mar 28 11:08:31 2008 +0100
33027 microblaze: Add Emaclite driver to Makefile
33029 Signed-off-by: Michal Simek <monstr@monstr.eu>
33031 commit 868cde5310f88234b774878e4f06e79df10a88b3
33032 Author: Michal Simek <monstr@monstr.eu>
33033 Date: Fri Mar 28 11:08:01 2008 +0100
33035 microblaze: Add Emac driver to Makefile
33037 Signed-off-by: Michal Simek <monstr@monstr.eu>
33039 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
33040 Author: Michal Simek <monstr@monstr.eu>
33041 Date: Fri Mar 28 12:42:29 2008 +0100
33043 microblaze: add Emac ethernet driver
33045 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
33046 Author: Michal Simek <monstr@monstr.eu>
33047 Date: Fri Mar 28 12:41:56 2008 +0100
33049 microblaze: add Emaclite ethernet driver
33051 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
33052 Author: Michal Simek <monstr@monstr.eu>
33053 Date: Fri Mar 28 11:04:01 2008 +0100
33055 microblaze: ML401 and XUPV2P remove emac and emaclite reference
33057 Signed-off-by: Michal Simek <monstr@monstr.eu>
33059 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
33060 Author: Michal Simek <monstr@monstr.eu>
33061 Date: Fri Mar 28 10:59:32 2008 +0100
33063 microblaze: remove old setting for emac driver
33065 Signed-off-by: Michal Simek <monstr@monstr.eu>
33067 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
33068 Author: Michal Simek <monstr@monstr.eu>
33069 Date: Fri Mar 28 10:58:15 2008 +0100
33071 microblaze: Clean Makefile from ancient emac driver
33073 Signed-off-by: Michal Simek <monstr@monstr.eu>
33075 commit ab68f921d9c741830f721c3d879c13a0c5597183
33076 Author: Daniel Hellstrom <daniel@gaisler.com>
33077 Date: Fri Mar 28 10:20:43 2008 +0100
33079 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
33081 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33083 commit 6ed8a43a19bb0275501bc286007daafa923552cf
33084 Author: Daniel Hellstrom <daniel@gaisler.com>
33085 Date: Wed Mar 26 23:38:48 2008 +0100
33087 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
33089 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33091 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
33092 Author: Daniel Hellstrom <daniel@gaisler.com>
33093 Date: Wed Mar 26 23:34:47 2008 +0100
33095 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
33097 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33099 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
33100 Author: Daniel Hellstrom <daniel@gaisler.com>
33101 Date: Fri Mar 28 10:06:52 2008 +0100
33103 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
33105 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33107 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
33108 Author: Daniel Hellstrom <daniel@gaisler.com>
33109 Date: Wed Mar 26 23:26:48 2008 +0100
33111 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
33113 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33115 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
33116 Author: Daniel Hellstrom <daniel@gaisler.com>
33117 Date: Fri Mar 28 10:00:33 2008 +0100
33119 SPARC: Added support for SPARC LEON2 SOC Processor.
33121 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33123 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
33124 Author: Daniel Hellstrom <daniel@gaisler.com>
33125 Date: Wed Mar 26 23:00:38 2008 +0100
33127 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
33129 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33131 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
33132 Author: Daniel Hellstrom <daniel@gaisler.com>
33133 Date: Wed Mar 26 22:51:29 2008 +0100
33135 SPARC: Added support for SPARC LEON3 SOC processor.
33137 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33139 commit bf3d8b31169546fcddb4737391e1893fb12d033a
33140 Author: Daniel Hellstrom <daniel@gaisler.com>
33141 Date: Fri Mar 28 08:29:26 2008 +0100
33143 SPARC: added SPARC support for new uimage in common code.
33145 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33147 commit 00ab32c85405a4fe65fd4128243086210fc90a21
33148 Author: Daniel Hellstrom <daniel@gaisler.com>
33149 Date: Wed Mar 26 22:36:03 2008 +0100
33151 SPARC: added SPARC board information to the command bdinfo.
33153 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33155 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
33156 Author: Daniel Hellstrom <daniel@gaisler.com>
33157 Date: Fri Mar 28 09:47:00 2008 +0100
33159 SPARC: Added generic support for SPARC architecture.
33161 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33163 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
33164 Author: Stefan Roese <sr@denx.de>
33165 Date: Thu Apr 3 14:50:34 2008 +0200
33167 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
33169 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
33170 has 2 RGMII instances and we need to configure the 2nd RGMII instance
33171 for the EMAC2+3 channels.
33173 Signed-off-by: Stefan Roese <sr@denx.de>
33175 commit c2a545ce33b26d80337f80b533828839249fb1c9
33176 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33177 Date: Wed Apr 2 08:03:56 2008 +0200
33179 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
33181 fdt.c: In function 'ft_cpu_setup':
33182 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
33183 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
33184 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
33185 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
33187 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33189 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
33190 Author: Andy Fleming <afleming@freescale.com>
33191 Date: Mon Mar 31 20:45:56 2008 -0500
33193 Fix fdt set command to conform to dts spec
33195 The fdt set command was treating properties specified as <00> and <0011>
33196 as byte streams, rather than as an array of cells. As we already have
33197 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
33198 we should use the <> syntax to describe arrays of cells, which are always
33199 32-bits per element. If we imagine this likely (IMHO) scenario:
33201 > fdt set /ethernet-phy@1 reg <1>
33203 With the old code, this would create a bad fdt, since the reg cell would be
33204 made to be one byte in length. But the cell must be 4 bytes, so this would
33205 break mysteriously.
33207 Also, the dts spec calls for constants inside the angle brackets (<>)
33208 to conform to C constant standards as they pertain to base.
33209 Take this scenario:
33211 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
33213 The old fdt command would complain that it couldn't parse that. Or, if you
33214 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
33217 > fdt set /mydev clock <1f78a40>
33219 Whereas the new code will accept decimal numbers.
33221 While I was in there, I extended the fdt command parser to handle property
33222 strings which are split across multiple arguments:
33224 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
33225 > fdt p /ethernet@f00
33227 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
33230 Lastly, the fdt print code was rearranged slightly to print arrays of cells
33231 if the length of the property is a multiple of 4 bytes, and to not print
33234 Signed-off-by: Andy Fleming <afleming@freescale.com>
33236 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
33237 Author: Stefan Roese <sr@denx.de>
33238 Date: Wed Apr 2 08:39:33 2008 +0200
33240 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
33242 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
33243 interface. This usage can be configured with the jumper J6. This patch
33244 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
33247 Signed-off-by: Stefan Roese <sr@denx.de>
33249 commit 6fe2946f198481254a6ee9600d7456b8316a4083
33250 Author: Kim Phillips <kim.phillips@freescale.com>
33251 Date: Fri Mar 28 17:37:49 2008 -0500
33253 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
33255 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
33256 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
33259 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33261 commit b5873f1732b92a25690e1513b90dfb0d644f6697
33262 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33263 Date: Tue Apr 1 07:30:51 2008 +0200
33265 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
33267 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33269 commit 2d934ea51f276522b532f870a820e844ff480b5b
33270 Author: Tor Krill <tor@excito.com>
33271 Date: Fri Mar 28 15:29:45 2008 +0100
33273 Add Vitesse 8601 support to TSEC driver
33275 Add phy_info for Vitesse VSC8601.
33276 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
33278 Signed-off-by: Tor Krill <tor@excito.com>
33279 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
33280 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33282 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
33283 Author: Daniel Hellstrom <daniel@gaisler.com>
33284 Date: Mon Mar 31 14:25:00 2008 +0000
33286 SPARC: added SMC91111 driver in and out macros for LEON processors.
33288 This patch makes SPARC/LEON processors able to read and write
33289 to the SMC91111 chip using the chip external I/O bus of the memory
33290 controller. This patchs defines the standard in and out macros
33291 expected by the SMC9111 driver.
33293 To access that I/O bus one must set up the memory controller
33294 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
33295 up this correctly when the other MCTRL parameters are set up. It
33296 can be set up from the board configuration header file.
33298 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33299 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33301 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
33302 Author: Stelian Pop <stelian@popies.net>
33303 Date: Wed Mar 26 18:52:34 2008 +0100
33305 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
33307 Signed-off-by: Stelian Pop <stelian@popies.net>
33309 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
33310 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33311 Date: Mon Mar 31 21:31:04 2008 +0200
33313 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
33315 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33317 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
33318 Author: Stelian Pop <stelian@popies.net>
33319 Date: Wed Mar 26 18:52:33 2008 +0100
33321 Add support for AT91SAM9260EK
33323 Support for booting from internal DataFlash, external DataFlash card
33324 or NAND flash is available.
33326 Signed-off-by: Stelian Pop <stelian@popies.net>
33328 commit 1762f13b4aab88b685b1722f17dada247945624b
33329 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33330 Date: Mon Mar 31 21:20:49 2008 +0200
33332 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
33334 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33336 commit 761712188b353494defb2b644491ff73d0daaa6f
33337 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33338 Date: Mon Mar 31 21:12:17 2008 +0200
33340 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
33342 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33344 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
33345 Author: Stelian Pop <stelian@popies.net>
33346 Date: Wed Mar 26 20:52:32 2008 +0100
33348 Port AT91CAP9 to the new headers
33350 Adapt the existing AT91CAP9 code to the new headers and APIs.
33352 Signed-off-by: Stelian Pop <stelian@popies.net>
33354 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
33355 Author: Stelian Pop <stelian@popies.net>
33356 Date: Wed Mar 26 19:52:31 2008 +0100
33358 Finish header files reworking
33360 Replace AT91CAP9.h file with several splitted header files coming
33361 from the Linux kernel.
33363 This is part 2 of the replacement: more header imports and edits.
33365 Signed-off-by: Stelian Pop <stelian@popies.net>
33367 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
33368 Author: Stelian Pop <stelian@popies.net>
33369 Date: Wed Mar 26 19:52:30 2008 +0100
33371 Import several header files from Linux
33373 Replace AT91CAP9.h file with several splitted header files coming
33374 from the Linux kernel.
33376 This is part 1 of the replacement: pristine header files import.
33378 Signed-off-by: Stelian Pop <stelian@popies.net>
33380 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
33381 Author: Stelian Pop <stelian@popies.net>
33382 Date: Wed Mar 26 20:52:28 2008 +0100
33384 Move at91cap9 specific files to at91sam9 directory
33386 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
33387 common infrastructure can be used. Let this infrastructure be
33388 named after the AT91SAM9 family, and move the existing AT91CAP9
33389 files to the new place.
33391 Signed-off-by: Stelian Pop <stelian@popies.net>
33393 commit 61106a565870ff503f92b251b94bd7afef889a04
33394 Author: Stelian Pop <stelian@popies.net>
33395 Date: Wed Mar 26 21:52:27 2008 +0100
33397 Use timer_init() instead of board supplied interrupt_init()
33399 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
33400 the board, so use timer_init() instead of interrupt_init().
33402 Signed-off-by: Stelian Pop <stelian@popies.net>
33404 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
33405 Author: Stelian Pop <stelian@popies.net>
33406 Date: Wed Mar 26 21:52:36 2008 +0100
33408 Cleanup DataFlash partition handling
33410 DataFlash partition information has become a mess. This patch
33411 defines a single partition scheme for Atmel DataFlashes. This partition
33412 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
33414 Signed-off-by: Stelian Pop <stelian@popies.net>
33416 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
33417 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33418 Date: Fri Mar 28 08:47:45 2008 -0500
33420 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
33422 When the version_string function in start.S is not 4-byte align,
33423 it will cause the compiler generates "unaligned opcodes detected
33424 in executable segment". This issue affects all ColdFire CPUs.
33425 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
33428 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33429 Acked-by: John Rigby <jrigby@freescale.com>
33431 commit bae61eefe15b4d454060a7140e49ae58322be803
33432 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33433 Date: Tue Mar 25 15:41:15 2008 -0500
33435 ColdFire: Add dspi and serial flash support for MCF5445x
33437 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33438 Acked-by: John Rigby <jrigby@freescale.com>
33440 commit 48ead7a7a922fceaf494e352abfab8216a41b417
33441 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33442 Date: Tue Mar 18 17:37:01 2008 -0500
33444 ColdFire: Remove R5200 board
33446 This board never went into production
33448 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
33449 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33450 Acked-by: John Rigby <jrigby@freescale.com>
33452 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
33453 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
33454 Date: Thu Jan 24 14:02:32 2008 -0600
33456 ColdFire: Added M5275EVB support.
33458 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
33459 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33460 Acked-by: John Rigby <jrigby@freescale.com>
33462 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
33463 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
33464 Date: Mon Feb 4 15:38:20 2008 -0600
33466 ColdFire: Added MCF5275 cpu support.
33468 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
33469 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33470 Acked-by: John Rigby <jrigby@freescale.com>
33472 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
33473 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33474 Date: Mon Mar 17 12:14:11 2008 -0500
33476 ColdFire: Define bootdelay in configuration file for M52277EVB
33478 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
33479 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33480 Acked-by: John Rigby <jrigby@freescale.com>
33482 commit 77878f16cedee17161ff2336990970fffc6cea35
33483 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33484 Date: Mon Mar 17 12:09:07 2008 -0500
33486 ColdFire: Fix second memory Chipselect for M5475EVB
33488 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33489 Acked-by: John Rigby <jrigby@freescale.com>
33491 commit 43d60642395a550956cb21d287c8cfa563913d28
33492 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33493 Date: Thu Mar 13 14:26:32 2008 -0500
33495 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
33497 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33498 Acked-by: John Rigby <jrigby@freescale.com>
33500 commit eb14ebe813a0cb5d47905228da446a5ad692473b
33501 Author: Larry Johnson <lrj@acm.org>
33502 Date: Sun Mar 30 20:33:04 2008 -0500
33504 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
33506 Signed-off-by: Larry Johnson <lrj@acm.org>
33508 commit 02e3892021112f21067d9ed1d04ae4182725ba52
33509 Author: Stefan Roese <sr@denx.de>
33510 Date: Mon Mar 31 12:20:48 2008 +0200
33512 ppc4xx: Small whitespace fix of esd patches
33514 Signed-off-by: Stefan Roese <sr@denx.de>
33516 commit 034394abb524785047c815f00dde8cdbdc1593c5
33517 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33518 Date: Sun Mar 30 18:52:44 2008 +0200
33520 ppc4xx: Cleanup PMC440 board support
33522 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33524 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
33525 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33526 Date: Sun Mar 30 18:52:06 2008 +0200
33528 ppc4xx: Add ptm configuration variables for PMC440
33530 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
33531 environment variables.
33533 Cleanup pci_target_init.
33535 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33537 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
33538 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33539 Date: Sun Mar 30 18:01:15 2008 +0200
33541 ppc4xx: Minor updates for DU440 boards
33543 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33545 commit d5bffeb868d6b4d462f558dac43011027b6644b7
33546 Author: Mike Frysinger <vapier@gentoo.org>
33547 Date: Tue Feb 19 00:54:20 2008 -0500
33549 Blackfin: cleanup and overhaul common board init functions
33551 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33553 commit b86b3416f874358acaf07519e7620cdb2145f75b
33554 Author: Mike Frysinger <vapier@gentoo.org>
33555 Date: Tue Feb 19 00:50:58 2008 -0500
33557 Blackfin: cleanup lib_blackfin/cache.c
33559 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33561 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
33562 Author: Mike Frysinger <vapier@gentoo.org>
33563 Date: Sun Mar 30 15:46:13 2008 -0400
33565 Blackfin: unify cpu and boot modes
33567 All of the duplicated code for Blackfin processors and boot modes have been
33568 unified. After all, the core is the same for all processors, just the
33569 peripheral set differs (which gets handled in the drivers).
33571 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33573 commit 880cc4381ea8360248cddcdf87a64566745a5724
33574 Author: Stelian Pop <stelian@popies.net>
33575 Date: Wed Mar 26 22:52:35 2008 +0100
33577 Fix CFG_NO_FLASH compilation.
33579 Many Atmel boards have no "real" (NOR) flash on board, and rely only
33580 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
33581 be present in a board configuration file, while still enabling flash
33582 commands like 'flinfo', 'protect', etc.
33584 Signed-off-by: Stelian Pop <stelian@popies.net>
33586 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
33587 Author: Mike Frysinger <vapier@gentoo.org>
33588 Date: Tue Feb 19 00:58:13 2008 -0500
33590 Blackfin: BF537-stamp: cleanup spi flash driver
33592 This punts the old spi flash driver for a new/generalized one until the
33593 common one can be integrated.
33595 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
33597 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
33598 Author: Ben Warren <biggerbadderben@gmail.com>
33599 Date: Sun Mar 30 11:34:34 2008 -0400
33601 Fix macro typo in common/cmd_mii.c
33603 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
33604 actually applied the wrong patch.
33606 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33608 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
33609 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33610 Date: Sun Mar 30 16:39:53 2008 +0200
33612 use correct at91rm9200 register name in m501sk board
33614 This fixes a naming bug for at91rm9200 lowlevel init code:
33615 NOR boot flash is on chipselect 0, not chipselect 2. This
33616 makes code use the register name from chip datasheets.
33618 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33620 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
33621 Author: David Brownell <david-b@pacbell.net>
33622 Date: Fri Jan 18 12:55:00 2008 -0800
33624 use correct at91rm9200 register name
33626 This fixes a naming bug for at91rm9200 lowlevel init code:
33627 NOR boot flash is on chipselect 0, not chipselect 2. This
33628 makes code use the register name from chip datasheets.
33630 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
33632 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
33633 Author: David Brownell <david-b@pacbell.net>
33634 Date: Fri Jan 18 12:45:45 2008 -0800
33636 add missing ARM boards to MAKEALL
33638 Add some missing ARM boards to MAKEALL. These build correctly,
33639 unlike several of the boards already listed.
33641 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
33643 commit 066bebd6353e33af3adefc3404560871699e9961
33644 Author: Peter Pearse <peter.pearse@arm.com>
33645 Date: Sun Mar 30 11:34:09 2008 +0100
33647 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
33648 to prevent compilation error.
33650 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
33652 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
33653 Author: Guennadi Liakhovetski <[lg@denx.de]>
33654 Date: Sun Mar 30 11:32:30 2008 +0100
33656 Support for the MX31ADS evaluation board from Freescale
33658 This patch adds support for the MX31ADS evaluation board from Freescale,
33659 initialization code is copied from RedBoot sources, also provided by Freescale.
33661 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33663 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
33664 Author: Sascha Hauer <s.hauer@pengutronix.de>
33665 Date: Sun Mar 30 11:32:27 2008 +0100
33667 Phytec Phycore-i.MX31 support
33669 This patch adds support for the Phytec Phycore-i.MX31 board
33671 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
33672 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33674 commit a147e56f03871bba4f05058d5e04ce7deb010b04
33675 Author: Sascha Hauer <s.hauer@pengutronix.de>
33676 Date: Sun Mar 30 11:32:24 2008 +0100
33678 mx31 litekit support
33680 This patch adds support for the mx31 litekit board
33682 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
33683 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33685 commit d6674e0e2a6a1f033945f78838566210d3f28c95
33686 Author: Sascha Hauer <s.hauer@pengutronix.de>
33687 Date: Sun Mar 30 11:32:21 2008 +0100
33689 add SMSC LAN9x1x Network driver
33691 This patch adds a driver for the following smsc network controllers:
33699 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
33700 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33702 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
33703 Author: Sascha Hauer <s.hauer@pengutronix.de>
33704 Date: Sun Mar 30 11:32:16 2008 +0100
33706 add an i2c driver for mx31
33708 This patch adds an i2c driver for Freescale i.MX processors
33710 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
33711 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33713 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
33714 Author: Sascha Hauer <s.hauer@pengutronix.de>
33715 Date: Sun Mar 30 11:30:43 2008 +0100
33717 core support for Freescale mx31
33719 This patch adds the core support for Freescale mx31
33721 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
33722 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33724 commit 8bf69d81782619187933a605f1a95ee1d069478d
33725 Author: Sascha Hauer <s.hauer@pengutronix.de>
33726 Date: Sun Mar 30 11:28:46 2008 +0100
33728 Separate omap24xx specific code from arm1136
33730 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
33732 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
33733 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
33735 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
33736 Author: Peter Pearse <peter.pearse@arm.com>
33737 Date: Sun Mar 30 11:23:05 2008 +0100
33739 Add pmdra into MAKEALL
33741 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
33743 commit a574a73852a527779234e73e17e7597fd8128882
33744 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
33745 Date: Sun Mar 30 11:21:58 2008 +0100
33747 Adds support for the Prodrive PMDRA board, based on a DM6441
33749 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
33751 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
33752 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
33753 Date: Sun Mar 30 11:11:34 2008 +0100
33755 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
33757 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
33759 commit 1704dc20917b4f71e373e2c888497ee666d40380
33760 Author: Dirk Behme <dirk.behme@gmail.com>
33761 Date: Sun Mar 30 11:09:01 2008 +0100
33763 - Remove *_masked() functions as noted by Wolfgang
33764 - Adapt register naming to recent TI spec (sprue26, March 2007)
33765 - Fix reset_timer() handling
33766 - As reported by Pieter [1] the overflow fix introduced a
33767 delay of factor 16 (e.g 2 seconds became 32). While the
33768 overflow fix is basically okay, it missed to divide udelay by
33770 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
33771 - Remove software division of timer count value (DIV(x)
33772 macro) and do it in hardware (TIM_CLK_DIV).
33773 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
33774 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
33775 the hints & testing!
33777 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
33779 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
33781 commit ac3315c26e143c31680750c9c13f027efbcc887e
33782 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
33783 Date: Thu Mar 6 16:45:44 2008 +0100
33785 new PHY @ e1000 - 2nd try
33787 Add 82541ER device with latest integrated IGP2 PHY.
33788 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
33790 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
33791 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33793 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
33794 Author: Daniel Hellstrom <daniel@gaisler.com>
33795 Date: Fri Mar 28 20:22:53 2008 +0100
33797 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
33799 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
33800 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
33801 available at www.gaisler.com.
33803 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
33804 offloading etc.) can be determined by a bit in the control register.
33805 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
33807 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33808 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33810 commit 233a8bcd94997f3f345833a3b82e836222f2a206
33811 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
33812 Date: Mon Mar 17 17:08:22 2008 -0500
33814 Add CONFIG_MII_INIT in cmd_mii.c
33816 Provide common configuration in do_mii() to execute mii_init()
33817 for all cpu architectures
33819 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33820 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33822 commit f605479de2deb11e834f31dfdb0af107c86aced6
33823 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
33824 Date: Mon Mar 17 17:08:16 2008 -0500
33826 ColdFire: Fix FEC transmit issue for MCF5275
33828 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33829 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33831 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
33832 Author: Aras Vaichas <arasv@magtech.com.au>
33833 Date: Wed Mar 26 09:43:57 2008 +1100
33835 DHCP request fix for Windows Server 2003
33837 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
33838 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
33839 interoperability problems with Windows Server 200x DHCP server when U-Boot
33840 client responds too fast for server to handle.
33842 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
33843 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33845 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
33846 Author: Daniel Hellstrom <daniel@gaisler.com>
33847 Date: Fri Mar 28 20:40:19 2008 +0100
33849 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
33851 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
33852 SPARC CPUs implement flash_read64 which calls __raw_readq.
33854 For current SPARC architectures (LEON2 and LEON3) each read from the
33855 FLASH must lead to a cache miss. This is because FLASH can not be set
33856 non-cacheable since program code resides there, and alternatively disabling
33857 cache is poor from performance view, or doing a cache flush between each
33858 read is even poorer.
33860 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
33861 load alternative space, the alternative space number (ASI) is processor
33862 implementation spcific and can be found by including <asm/processor.h>.
33864 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33866 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
33867 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
33868 Date: Fri Mar 28 15:41:25 2008 +0100
33870 Make MPC83xx one step closer to full relocation.
33872 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
33873 and use GOT relative reference.
33875 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
33876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33878 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
33879 Author: Michael Barkowski <michael.barkowski@freescale.com>
33880 Date: Thu Mar 27 14:34:43 2008 -0400
33882 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
33884 This patch fixes eeprom page size so that you can now write more than
33885 64 bytes at a time.
33887 It also makes the board take MAC addresses, if found, from EEPROM.
33889 User should place up to 4 addresses at offset 0x7f00, for
33890 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
33891 four six-byte values should have it's CRC at the end. crc32 and
33892 eeprom commands can be used to accomplish this.
33894 If CRC fails, MAC addresses come from the environment. If CRC
33895 succeeds, the environment is overwritten at startup.
33897 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
33898 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33900 commit 8f325cff31f6e745e6540014b131b9a97f61944c
33901 Author: Michael Barkowski <michael.barkowski@freescale.com>
33902 Date: Fri Mar 28 15:15:38 2008 -0400
33904 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
33906 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
33907 controller on the PCI bus in Linux on the MPC8323ERDB.
33909 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
33912 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
33913 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33915 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
33916 Author: Kim Phillips <kim.phillips@freescale.com>
33917 Date: Fri Mar 28 10:19:07 2008 -0500
33919 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
33921 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
33922 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
33923 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
33924 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
33925 convenience macros.
33927 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33929 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
33930 Author: Kim Phillips <kim.phillips@freescale.com>
33931 Date: Fri Mar 28 10:18:53 2008 -0500
33933 mpc83xx: display ddr frequency in board_add_ram_info banner
33935 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33937 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
33938 Author: Kim Phillips <kim.phillips@freescale.com>
33939 Date: Fri Mar 28 10:18:40 2008 -0500
33941 mpc83xx: unreinvent mem_clk
33943 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
33944 mem_*_clk for consistency's sake.
33946 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33948 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
33949 Author: Kim Phillips <kim.phillips@freescale.com>
33950 Date: Fri Mar 28 14:31:23 2008 -0500
33952 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
33954 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33956 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
33957 Author: Dave Liu <r63238@freescale.com>
33958 Date: Wed Mar 26 22:57:19 2008 +0800
33960 mpc83xx: enable the SATA interface on mpc837xemds board
33962 Enable the first two SATA interfaces on MPC837xEMDS board,
33963 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
33965 Signed-off-by: Dave Liu <daveliu@freescale.com>
33966 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33968 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
33969 Author: Dave Liu <r63238@freescale.com>
33970 Date: Wed Mar 26 22:56:36 2008 +0800
33972 mpc83xx: initialize serdes for MPC837xEMDS boards
33974 This patch is stolen from Anton Vorontsov's patch
33975 for mpc837xerdb boards.
33977 The reference clk and xcorevdd voltage of serdes1/2
33978 is same between mpc837xemds and mpc837xerdb.
33980 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
33981 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
33982 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
33984 Signed-off-by: Dave Liu <daveliu@freescale.com>
33985 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33987 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
33988 Author: Stefan Roese <sr@denx.de>
33989 Date: Fri Mar 28 14:09:04 2008 +0100
33991 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
33993 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
33994 interface. This usage can be configured with the jumper J6. This patch
33995 displays the current configuration upon bootup and changes the PCIe
33996 init loop, to only initialize the availabel PCIe slots.
33998 Signed-off-by: Stefan Roese <sr@denx.de>
34000 commit 90447ecbbac8572457b6d8903073ac3f120995ba
34001 Author: Tor Krill <tor@excito.com>
34002 Date: Fri Mar 28 11:29:10 2008 +0100
34004 MTD/CFI: Add support for 16bit legacy AMD flash
34006 Add entry for 512Kx16 AMD flash to jedec_table.
34007 Read out 16bit device id if chipwidth is 16bit.
34008 Fixed coding style after Stefans feedback
34010 Signed-off-by: Tor Krill <tor@excito.com>
34012 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
34013 Author: Stefan Roese <sr@denx.de>
34014 Date: Fri Mar 28 11:02:53 2008 +0100
34016 ppc: Small change to CFG_MEM_TOP_HIDE description
34018 Signed-off-by: Stefan Roese <sr@denx.de>
34020 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
34021 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34022 Date: Thu Mar 27 15:44:12 2008 +0900
34024 sh: Add support stat structure and stat.h
34026 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34028 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
34029 Author: Mark Jonas <toertel@gmail.com>
34030 Date: Sat Mar 22 19:27:52 2008 +0100
34032 sh: Removed warning when compiling drivers/serial/serial_sh.c.
34034 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
34035 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34037 commit f309fa38929ffba71230c02330ffa42f4bba6333
34038 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34039 Date: Wed Mar 12 18:02:57 2008 +0900
34041 sh: Remove disable_ctrlc function from R7780MP
34043 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34045 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
34046 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34047 Date: Wed Mar 12 17:55:15 2008 +0900
34049 sh: Add maintainer of R7780MP to MAINTAINER file
34051 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
34053 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34055 commit f5e2466f7baa887a7df0c536333eea8231333497
34056 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34057 Date: Tue Mar 25 17:11:24 2008 +0900
34059 sh: Add support Renesas Solutions R2D plus board
34061 R2D plus is SH reference board used with SH7751R.
34062 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
34063 one PCI bus, VGA, and two Ethernet controller.
34065 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34067 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
34068 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34069 Date: Wed Mar 12 12:15:29 2008 +0900
34071 sh: Add support SH4 cache control
34073 Add support SH4 cache control and flash_cache function
34075 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34077 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
34078 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34079 Date: Mon Mar 24 01:53:01 2008 +0900
34081 sh: Add support PCI host driver for SH7751/SH7751R
34083 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34085 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
34086 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34087 Date: Mon Mar 24 02:11:26 2008 +0900
34089 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
34091 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34093 commit 566933278101c144d75361ea682678a326c1290d
34094 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34095 Date: Wed Mar 12 12:10:28 2008 +0900
34097 sh: Add support SuperH SH7751/SH7751R
34099 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34101 commit 3313e0e26224fc9a0c445124f3455058c696df84
34102 Author: Mark Jonas <toertel@gmail.com>
34103 Date: Mon Mar 10 11:37:10 2008 +0100
34105 sh: Added support for SH7720 based board MPR2.
34107 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
34108 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34110 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
34111 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34112 Date: Thu Mar 6 14:05:53 2008 +0900
34114 sh: Fix receive FIFO level register of SH4A
34116 Receive FIFO level register is different in SH4A.
34117 Because register is different, cannot occasionally receive data.
34119 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34121 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
34122 Author: Yusuke Goda <goda.yusuke@renesas.com>
34123 Date: Tue Mar 11 12:55:12 2008 +0900
34125 sh: Add support Renesas Solutions R7780MP
34127 Renesas Solutions R7780MP is a reference board on SH7780.
34128 This board has serial, 10/100 base Ethernet deivice, CF slot
34129 and VGA devices. This board can set extension board.
34130 Extension board has 10/100/1000 base Ethernet device, PCI slot,
34133 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
34134 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34136 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
34137 Author: Yusuke Goda <goda.yusuke@renesas.com>
34138 Date: Wed Mar 5 14:30:02 2008 +0900
34140 sh: Add support PCI of SuperH and SH7780
34142 This patch add support PCI of SuperH base code and SH7780 specific code.
34144 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
34145 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34147 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
34148 Author: Yusuke Goda <goda.yusuke@renesas.com>
34149 Date: Wed Mar 5 14:23:26 2008 +0900
34151 sh: Add support SH7780
34153 SH7780 is CPU of Renesas Technology.
34157 - DDR-SDRAM controller
34160 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
34161 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34163 commit c2042f5952a686c414031309b8f244513bf578f0
34164 Author: goda.yusuke <goda.yusuke@renesas.com>
34165 Date: Fri Jan 25 20:46:36 2008 +0900
34167 sh: Add support Renesas Solutions Migo-R board
34169 Migo-R is a board based on SH7722 and has may devices.
34170 In this patch, supported SCIF, NOR flash and Ethernet.
34172 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
34173 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34175 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
34176 Author: Bartlomiej Sieka <tur@semihalf.com>
34177 Date: Thu Mar 27 15:06:40 2008 +0100
34179 Fix host tool build breakage, take two
34181 Revert commit 87c8431f and fix build breakage so that the build continues
34182 to work on FC systems.
34184 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34186 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
34187 Author: Stefan Roese <sr@denx.de>
34188 Date: Wed Mar 19 09:36:47 2008 +0100
34190 ppc4xx: Enable ECC on LWMON5
34192 Since all ECC related problems seem to be resolved on LWMON5, this patch
34193 now enables ECC support.
34195 We have to write the ECC bytes by zeroing and flushing in smaller
34196 steps, since the whole 256MByte takes too long for the external
34199 Signed-off-by: Stefan Roese <sr@denx.de>
34201 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
34202 Author: Larry Johnson <lrj@acm.org>
34203 Date: Mon Mar 17 11:10:35 2008 -0500
34205 ppc4xx: Updates to Korat-specific code
34207 This patch contains updates for changes for the Korat PPC440EPx board.
34208 These changes include:
34210 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
34211 described in the new "doc/README.korat" file;
34213 (2) a new memory map for the registers in the board's CPLD;
34215 (3) a revised format for manufacturer's data in serial EEPROM; and
34217 (4) changes to track updates to U-Boot for the Sequoia board.
34219 Signed-off-by: Larry Johnson <lrj@acm.org>
34221 commit f766cdf89b3a2a7634b8c5869f606150e332036c
34222 Author: Markus Brunner <super.firetwister@gmail.com>
34223 Date: Thu Mar 27 10:46:25 2008 +0100
34225 ppc4xx: PPC405EP Set EMAC noise filter bits
34227 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
34228 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
34229 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
34231 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
34232 Signed-off-by: Stefan Roese <sr@denx.de>
34234 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
34235 Author: Mike Nuss <mike@terascala.com>
34236 Date: Wed Feb 20 11:54:20 2008 -0500
34238 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
34240 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
34241 after startup to change the speed of the clocks. This patch adds the
34242 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
34243 initialization code will reconfigure the PLL to run the system with a CPU
34244 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
34247 Signed-off-by: Mike Nuss <mike@terascala.com>
34248 Acked-by: Stefan Roese <sr@denx.de>
34250 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
34251 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
34252 Date: Thu Mar 27 09:12:40 2008 +0100
34254 new-image: Fix host tool build breakage
34256 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
34258 commit 6fb4b640562a10daff0dbe537638d511b5b48650
34259 Author: Stefan Roese <sr@denx.de>
34260 Date: Thu Mar 27 10:24:03 2008 +0100
34262 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
34264 Signed-off-by: Stefan Roese <sr@denx.de>
34266 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
34267 Author: Stefan Roese <sr@denx.de>
34268 Date: Wed Mar 19 10:23:43 2008 +0100
34270 ppc4xx: Add fdt support to Prodrive alpr
34272 Since this board will probably be ported to arch/powerpc in the
34273 near future, we add device tree support now. This way we are
34274 "ready" for arch/powerpc from now on.
34276 Signed-off-by: Stefan Roese <sr@denx.de>
34278 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
34279 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
34280 Date: Mon Mar 17 09:27:56 2008 +0100
34282 ppc4xx: Enable cache support on the ALPR board
34284 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
34286 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
34287 Author: Stefan Roese <sr@denx.de>
34288 Date: Wed Mar 26 10:14:11 2008 +0100
34290 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
34292 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
34293 memory area will get subtracted from the top (end) of ram and won't get
34294 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
34295 should gets passed the now "corrected" memory size and won't touch it
34296 either. This should work for arch/ppc and arch/powerpc. Only Linux board
34297 ports in arch/powerpc with bootwrapper support, which recalculate the
34298 memory size from the SDRAM controller setup, will have to get fixed
34299 in Linux additionally.
34301 This patch enables this config option on some PPC440EPx boards as a workaround
34302 for the CHIP 11 errata. Here the description from the AMCC documentation:
34304 CHIP_11: End of memory range area restricted access.
34308 The 440EPx DDR controller does not acknowledge any
34309 transaction which is determined to be crossing over the
34310 end-of-memory-range boundary, even if the starting address is
34311 within valid memory space. Any such transaction from any PLB4
34312 master will result in a PLB time-out on PLB4 bus.
34315 In case of such misaligned bursts, PLB4 masters will not
34316 retrieve any data at all, just the available data up to the
34317 end of memory, especially the 440 CPU. For example, if a CPU
34318 instruction required an operand located in memory within the
34319 last 7 words of memory, the DCU master would burst read 8
34320 words to update the data cache and cross over the
34321 end-of-memory-range boundary. Such a DCU read would not be
34322 answered by the DDR controller, resulting in a PLB4 time-out
34323 and ultimately in a Machine Check interrupt. The data would
34324 be inaccessible to the CPU.
34327 Forbid any application to access the last 256 bytes of DDR
34328 memory. For example, make your operating system believe that
34329 the last 256 bytes of DDR memory are absent. AMCC has a patch
34330 that does this, available for Linux.
34332 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
34333 lwmon5, korat, sequoia
34335 The other remaining 440EPx board were intentionally not included
34336 since it is not clear to me, if they use the end of ram for some
34337 other purpose. This is unclear, since these boards have CONFIG_PRAM
34338 defined and even comments like this:
34341 /* esd expects pram at end of physical memory.
34342 * So no logbuffer at the moment.
34345 It is strongly recommended to not use the last 256 bytes on those
34346 boards too. Patches from the board maintainers are welcome.
34348 Signed-off-by: Stefan Roese <sr@denx.de>
34350 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
34351 Author: Stefan Roese <sr@denx.de>
34352 Date: Thu Mar 27 10:09:05 2008 +0100
34354 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
34356 Signed-off-by: Stefan Roese <sr@denx.de>
34358 commit d56a3ce179688cde61073a3690e21703d68fafd7
34359 Author: Stefan Roese <sr@denx.de>
34360 Date: Tue Mar 25 17:51:13 2008 +0100
34362 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
34364 The routine ft_board_setup() configures the EBC NOR mappings for the
34365 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
34366 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
34367 problem, we need to pass the corrected address here too.
34369 Signed-off-by: Stefan Roese <sr@denx.de>
34371 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
34372 Author: Stefan Roese <sr@denx.de>
34373 Date: Wed Mar 19 16:35:12 2008 +0100
34375 ppc4xx: Fix compilation warning in 4xx_enet.c
34377 Signed-off-by: Stefan Roese <sr@denx.de>
34379 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
34380 Author: Stefan Roese <sr@denx.de>
34381 Date: Wed Mar 19 16:20:49 2008 +0100
34383 ppc4xx: Add AMCC Glacier 406GT eval board support
34385 This patch adds support for the AMCC Glacier 460GT eval board.
34386 The main difference to the Canyonlands board are listed here:
34388 - 4 ethernet ports instead of 2
34392 Currently EMAC2+3 are not working. This will be fixed in a later
34395 Signed-off-by: Stefan Roese <sr@denx.de>
34397 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
34398 Author: Stefan Roese <sr@denx.de>
34399 Date: Thu Mar 27 08:47:26 2008 +0100
34401 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
34403 Signed-off-by: Stefan Roese <sr@denx.de>
34405 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
34406 Author: Anatolij Gustschin <agust@denx.de>
34407 Date: Wed Mar 26 21:05:43 2008 +0100
34409 Fix out of tree building issue
34411 Currently U-Boot building in some external directory
34412 doesn't work. This patch tries to fix the problem.
34414 Signed-off-by: Anatolij Gustschin <agust@denx.de>
34416 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
34417 Author: Anatolij Gustschin <agust@denx.de>
34418 Date: Wed Mar 26 18:13:33 2008 +0100
34420 README: update documentation (availability, links, etc.)
34424 Signed-off-by: Anatolij Gustschin <agust@denx.de>
34426 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
34427 Author: Anatolij Gustschin <agust@denx.de>
34428 Date: Wed Mar 26 17:47:44 2008 +0100
34430 Fix compilation error in cmd_usb.c
34432 This patch fixes compilation error
34433 cmd_usb.c: In function 'do_usb':
34434 cmd_usb.c:552: error: void value not ignored as it ought to be
34436 Signed-off-by: Anatolij Gustschin <agust@denx.de>
34438 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
34439 Author: Timur Tabi <timur@freescale.com>
34440 Date: Fri Mar 14 17:45:29 2008 -0500
34442 Add support for setting the I2C bus speed in fsl_i2c.c
34444 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
34445 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
34446 but fsl_i2c.c ignores it and uses conservative value when programming the
34449 Signed-off-by: Timur Tabi <timur@freescale.com>
34450 Acked-by: Andy Fleming <afleming@freescale.com>
34452 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
34453 Author: Wolfgang Denk <wd@denx.de>
34454 Date: Thu Mar 27 00:03:57 2008 +0100
34456 Coding style cleanup, update CHANGELOG
34458 Signed-off-by: Wolfgang Denk <wd@denx.de>
34460 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
34461 Author: Dave Liu <r63238@freescale.com>
34462 Date: Wed Mar 26 22:55:32 2008 +0800
34464 drivers: add the support for Freescale SATA controller
34466 Add the Freescale on-chip SATA controller driver to u-boot,
34467 The SATA controller is used on the 837x and 8315 targets,
34468 The driver can be used to load kernel, fs and dtb.
34471 - 1.5/3 Gbps link speed
34472 - LBA48, LBA28 support
34473 - DMA and FPDMA support
34474 - Two ports support
34476 Signed-off-by: Dave Liu <daveliu@freescale.com>
34478 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
34479 Author: Dave Liu <r63238@freescale.com>
34480 Date: Wed Mar 26 22:54:44 2008 +0800
34482 ata: add the readme for SATA command line
34484 Signed-off-by: Dave Liu <daveliu@freescale.com>
34486 commit cd54081cd479e542fc399b8a40651ff11a1ad849
34487 Author: Dave Liu <r63238@freescale.com>
34488 Date: Wed Mar 26 22:53:24 2008 +0800
34490 ata: enable the sata initialize on boot up
34492 Signed-off-by: Dave Liu <daveliu@freescale.com>
34494 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
34495 Author: Dave Liu <r63238@freescale.com>
34496 Date: Wed Mar 26 22:52:36 2008 +0800
34498 ata: add the fis struct for SATA
34500 Signed-off-by: Dave Liu <daveliu@freescale.com>
34502 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
34503 Author: Dave Liu <r63238@freescale.com>
34504 Date: Wed Mar 26 22:51:44 2008 +0800
34506 ata: add the libata support
34508 add simple libata support in u-boot
34510 Signed-off-by: Dave Liu <daveliu@freescale.com>
34512 commit 8e9bb43429e50df55fa41932cbe65841ff579220
34513 Author: Dave Liu <r63238@freescale.com>
34514 Date: Wed Mar 26 22:50:45 2008 +0800
34516 ata: make the ata_piix driver using new SATA framework
34518 original ata_piix driver is using IDE framework, not real
34519 SATA framework. For now, the ata_piix driver is only used
34520 by x86 sc520_cdp board. This patch makes the ata_piix driver
34521 use the new SATA framework, so
34523 - remove the duplicated command stuff
34524 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
34525 - add the CONFIG_CMD_SATA define to sc520_cdp.h
34527 Signed-off-by: Dave Liu <daveliu@freescale.com>
34529 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
34530 Author: Dave Liu <r63238@freescale.com>
34531 Date: Wed Mar 26 22:49:44 2008 +0800
34533 ata: add the support for SATA framework
34535 - add the SATA framework
34536 - add the SATA command line
34538 Signed-off-by: Dave Liu <daveliu@freescale.com>
34540 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
34541 Author: Dave Liu <r63238@freescale.com>
34542 Date: Wed Mar 26 22:48:18 2008 +0800
34544 ata: merge the header of ata_piix driver
34546 move the sata.h from include/ to drivers/block/ata_piix.h
34548 Signed-off-by: Dave Liu <daveliu@freescale.com>
34550 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
34551 Author: Dave Liu <r63238@freescale.com>
34552 Date: Wed Mar 26 22:47:06 2008 +0800
34554 ata: merge the ata_piix driver
34556 move the cmd_sata.c from common/ to drivers/ata_piix.c,
34557 the cmd_sata.c have some part of ata_piix controller drivers.
34558 consolidate the driver to have better framework.
34560 Signed-off-by: Dave Liu <daveliu@freescale.com>
34562 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
34563 Author: Markus Klotzbuecher <mk@denx.de>
34564 Date: Wed Mar 26 18:26:43 2008 +0100
34566 USB, Storage: fix a bug introduced in commit
34567 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
34568 to only print only information on one storage device, but not for
34571 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
34573 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
34574 Author: Anatolij Gustschin <agust@denx.de>
34575 Date: Wed Mar 26 17:47:44 2008 +0100
34577 Fix compilation error in cmd_usb.c
34579 This patch fixes compilation error
34580 cmd_usb.c: In function 'do_usb':
34581 cmd_usb.c:552: error: void value not ignored as it ought to be
34583 Signed-off-by: Anatolij Gustschin <agust@denx.de>
34584 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
34586 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
34587 Author: Kumar Gala <galak@kernel.crashing.org>
34588 Date: Wed Mar 26 08:53:53 2008 -0500
34590 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
34592 Provide a board_lmb_reserve helper function to ensure we reserve
34593 the page of memory we are using for the boot page translation code.
34595 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34597 commit 79679d80021ab095e639e250ca472fe526da02e2
34598 Author: Kumar Gala <galak@kernel.crashing.org>
34599 Date: Wed Mar 26 08:34:25 2008 -0500
34601 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
34603 The following changes are needed to be inline with ePAPR v0.81:
34605 * r4, r5 and now always set to 0 on boot release
34606 * r7 is used to pass the size of the initial map area (IMA)
34607 * EPAPR_MAGIC value changed for book-e processors
34608 * changes in the spin table layout
34609 * spin table supports a 64-bit physical release address
34611 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34613 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
34614 Author: Jon Loeliger <jdl@freescale.com>
34615 Date: Wed Mar 19 15:02:07 2008 -0500
34617 FSL: Clean up board/freescale/common/Makefile
34619 Each file that can be built here now follows some
34620 CONFIG_ option so that they are appropriately built
34621 or not, as needed. And CONFIG_ defines were added
34622 to various board config files to make sure that happens.
34624 The other board/freescale/*/Makefiles no longer need
34625 to reach up and over into ../common to build their
34626 individually needed files any more.
34628 Boards that are CDS specific were renamed with cds_ prefix.
34630 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34632 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
34633 Author: Kumar Gala <galak@kernel.crashing.org>
34634 Date: Wed Feb 27 22:00:27 2008 -0600
34636 85xx: Fix merge duplication
34638 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
34640 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34642 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
34643 Author: James Yang <James.Yang@freescale.com>
34644 Date: Tue Feb 12 16:35:07 2008 -0600
34646 85xx: Expand CCSR space with more DDR controller registers.
34648 Signed-off-by: James Yang <James.Yang@freescale.com>
34649 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34650 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34652 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
34653 Author: James Yang <James.Yang@freescale.com>
34654 Date: Fri Feb 8 18:05:08 2008 -0600
34656 85xx: Speed up get_ddr_freq() and get_bus_freq()
34658 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
34659 called. However, get_sys_info() recalculates extraneous information when
34660 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
34661 values from global_data instead.
34663 Signed-off-by: James Yang <James.Yang@freescale.com>
34664 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34666 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
34667 Author: James Yang <James.Yang@freescale.com>
34668 Date: Fri Feb 8 16:46:27 2008 -0600
34670 85xx: Show DDR memory data rate in addition to the memory clock frequency.
34672 Show the DDR memory data rate in addition to the memory clock
34673 frequency. For DDR/DDR2 memories the memory data rate is 2x the
34676 Signed-off-by: James Yang <James.Yang@freescale.com>
34677 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34679 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
34680 Author: James Yang <James.Yang@freescale.com>
34681 Date: Fri Feb 8 16:44:53 2008 -0600
34683 85xx: get_tbclk() speed up and rounding fix
34685 Speed up get_tbclk() by referencing pre-computed bus clock
34686 frequency value from global data instead of sys_info_t. Fix
34687 rounding of result to nearest; previously it was rounding
34690 Signed-off-by: James Yang <James.Yang@freescale.com>
34691 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34693 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
34694 Author: Andy Fleming <afleming@freescale.com>
34695 Date: Wed Feb 6 01:19:40 2008 -0600
34697 Update SVR numbers to expand support
34699 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
34700 is used to distinguish certain variants within an SOC family. To
34701 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
34702 constants to reflect the larger value. We also add SVR numbers for all
34703 of the current variants. Finally, to make things neater, rather than
34704 use an enormous switch statement to print out the CPU type, we create
34705 and array of SVR/name pairs (using a macro), and print out the CPU name
34706 that matches the SVR SOC version.
34708 Signed-off-by: Andy Fleming <afleming@freescale.com>
34710 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
34711 Author: Andy Fleming <afleming@freescale.com>
34712 Date: Wed Feb 6 01:12:57 2008 -0600
34714 Add the Freescale PCI device IDs
34716 Signed-off-by: Andy Fleming <afleming@freescale.com>
34718 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
34719 Author: Kumar Gala <galak@kernel.crashing.org>
34720 Date: Thu Feb 14 11:04:23 2008 -0600
34722 85xx: Added support for multicore boot mechanism
34724 Added the cpu command that provides a generic mechanism to get status,
34725 reset, and release secondary cores in multicore processors.
34727 Added support for using the ePAPR defined spin-table mechanism on 85xx.
34729 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34730 Signed-off-by: Andy Fleming <afleming@freescale.com>
34732 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
34733 Author: Kumar Gala <galak@kernel.crashing.org>
34734 Date: Thu Jan 17 16:48:33 2008 -0600
34736 85xx: Added support for multicore boot mechanism
34738 Added the cpu command that provides a generic mechanism to get status,
34739 reset, and release secondary cores in multicore processors.
34741 Added support for using the ePAPR defined spin-table mechanism on 85xx.
34743 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34745 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
34746 Author: Kumar Gala <galak@kernel.crashing.org>
34747 Date: Wed Jan 30 14:55:14 2008 -0600
34749 85xx: Add the concept of CFG_CCSRBAR_PHYS
34751 When we go to 36-bit physical addresses we need to keep the concept of
34752 the physical CCSRBAR address seperate from the virtual one.
34754 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
34756 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34758 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
34759 Author: Wolfgang Denk <wd@denx.de>
34760 Date: Wed Mar 26 15:38:47 2008 +0100
34762 Coding style cleanup.
34764 Signed-off-by: Wolfgang Denk <wd@denx.de>
34766 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
34767 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
34768 Date: Wed Mar 26 13:02:13 2008 +0100
34770 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
34772 The default settings for RTC DS1337 keeps the OSC
34773 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
34776 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
34778 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
34779 Author: Wolfgang Denk <wd@denx.de>
34780 Date: Wed Mar 26 11:48:46 2008 +0100
34782 Cleanup coding style, update CHANGELOG
34784 Signed-off-by: Wolfgang Denk <wd@denx.de>
34786 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
34787 Author: Wolfgang Denk <wd@denx.de>
34788 Date: Wed Mar 26 10:40:12 2008 +0100
34790 README: update documentation (availability, links, etc.)
34792 Signed-off-by: Wolfgang Denk <wd@denx.de>
34794 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
34795 Author: Aras Vaichas <arasv@magtech.com.au>
34796 Date: Tue Mar 25 12:09:07 2008 +1100
34798 USB Storage, add meaningful return value
34800 This patch changes the "usb storage" command to return success if it
34801 finds a USB storage device, otherwise it returns error.
34803 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
34805 commit 18e69a35efbb078403db0c0063986470dad7d082
34806 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34807 Date: Fri Mar 14 23:20:18 2008 +0300
34809 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
34811 Linux understands "host" (default), "peripheral" and "otg" (broken).
34812 Though, U-Boot doesn't restrict dr_mode variable to these values (think
34813 of renames in future).
34815 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34816 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34818 commit c7604783b236e368f225efb7b3efb418fe20b404
34819 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34820 Date: Fri Mar 14 23:20:30 2008 +0300
34822 tsec: fix link detection for the RTL8211B PHY
34824 RTL8211B sets link state register after autonegotiation complete,
34825 so with bootdelay=0 RTL8211B will report lack of the link.
34827 To fix this, we should wait for aneg to complete, even if the
34828 link is currently down.
34830 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34831 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34833 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
34834 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34835 Date: Mon Mar 24 20:47:09 2008 +0300
34837 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
34839 device_type = "soc" is being deprecated, newer device trees will use
34840 "fsl,soc" and/or "fsl,immr" for the soc nodes.
34842 This patch also adds clock-frequency property for soc nodes (the same
34843 value as bus-frequency).
34845 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34847 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
34848 Author: Joe D'Abbraccio <ljd015@freescale.com>
34849 Date: Mon Mar 24 13:00:59 2008 -0400
34851 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
34853 With the original value of 1/2 clock cycle delay, the system ran relatively
34854 stable except when we run benchmarks that are intensive users of memory.
34855 When I run samba connected disk with a HDBENCH test, the system locks-up
34856 or reboots sporadically.
34858 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
34860 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
34861 Author: Scott Wood <scottwood@freescale.com>
34862 Date: Mon Mar 24 12:44:13 2008 -0500
34864 mpc83xx: Set PCI I/O bus-address base to zero.
34866 The device trees for these boards describe PCI I/O as starting from
34867 address zero from the device's perspective.
34869 Placing I/O elsewhere may cause problems with certain PCI boards, and may
34870 cause problems with Linux.
34872 Signed-off-by: Scott Wood <scottwood@freescale.com>
34874 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
34875 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34876 Date: Mon Mar 24 20:47:05 2008 +0300
34878 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
34880 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
34881 This patch fixes "system time drifting" problem.
34883 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34885 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
34886 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34887 Date: Mon Mar 24 20:47:02 2008 +0300
34889 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
34891 This is needed to update /choosen/linux,stdout-path properly.
34893 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34895 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
34896 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34897 Date: Mon Mar 24 20:47:00 2008 +0300
34899 mpc83xx: MPC8360E-RDK: add dhcp command
34901 Plus modify environment to use it and remove bootfile env variable,
34902 it is internal and CONFIG_BOOTFILE is used for these purposes.
34904 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34906 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
34907 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34908 Date: Mon Mar 24 20:46:57 2008 +0300
34910 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
34912 Current DDR setup easily causes memory corruption, this patch fixes it.
34914 Also fix TIMING_CFG0_MRS_CYC definition.
34916 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34918 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
34919 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34920 Date: Mon Mar 24 20:46:53 2008 +0300
34922 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
34924 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
34925 controller and FHCI (QE USB).
34927 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34929 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
34930 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34931 Date: Mon Mar 24 20:46:51 2008 +0300
34933 mpc83xx: MPC8360E-RDK: add support for NAND
34935 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34937 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
34938 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34939 Date: Mon Mar 24 20:46:46 2008 +0300
34941 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
34943 This is needed for BCM PHYs to work on this board.
34945 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34947 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
34948 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34949 Date: Mon Mar 24 20:46:34 2008 +0300
34951 uec: add support for Broadcom BCM5481 Gigabit PHY
34953 This patch adds basic support for Broadcom BCM5481 PHY.
34955 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
34956 Peter Barada <peterb@logicpd.com>.
34958 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34960 commit 6a600c3a1876bc203445df4f0fd6b12648259666
34961 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34962 Date: Mon Mar 24 20:46:28 2008 +0300
34964 uec: add support for RGMII_RXID interface mode
34966 PHY drivers will use it to setup software delay between RXD and RXC
34969 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34971 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
34972 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34973 Date: Mon Mar 24 20:46:24 2008 +0300
34975 uec: add support for gbit mii status readings
34977 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34979 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
34980 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34981 Date: Mon Mar 24 17:40:47 2008 +0300
34983 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
34985 This is primarily for the early console support.
34987 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34989 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
34990 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34991 Date: Mon Mar 24 17:40:43 2008 +0300
34993 83xx: initialize serdes for MPC837XRDB boards
34995 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
34996 On the MPC8378ERDB: 2 PCI-E
34997 On the MPC8379ERDB: 4 SATA
34999 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
35001 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
35002 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
35003 Date: Mon Mar 24 17:40:32 2008 +0300
35005 83xx: serdes setup routines
35007 This patch adds few routines to configure serdes on 837x targets.
35009 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
35011 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
35012 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
35013 Date: Mon Mar 24 17:40:27 2008 +0300
35015 83xx: split COBJS onto separate lines
35017 ..plus get rid of some #ifdefs in the .c files.
35019 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
35021 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
35022 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
35023 Date: Mon Mar 24 17:40:23 2008 +0300
35025 83xx: nand support for MPC837XRDB boards
35027 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
35029 commit 82e45a204190593e8613145a928f998fb8c909c4
35030 Author: Jerry Van Baren <gvb.uboot@gmail.com>
35031 Date: Tue Mar 18 21:44:41 2008 -0400
35033 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
35035 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
35036 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35038 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
35039 Author: Michael Barkowski <michael.barkowski@freescale.com>
35040 Date: Thu Mar 20 13:15:39 2008 -0400
35042 mpc8323erdb: remove RTC and add EEPROM
35044 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
35046 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
35047 Acked-by: Kim Phillips <kim.phillips@freescale.com>
35049 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
35050 Author: Michael Barkowski <michael.barkowski@freescale.com>
35051 Date: Thu Mar 20 13:15:34 2008 -0400
35053 mpc8323erdb: Improve the system performance
35055 The following changes are based on kernel UCC ethernet performance:
35057 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
35058 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
35059 switch to enable this setting.
35061 The following changes are based on the App Note AN3369 and
35062 verified to improve memory latency using LMbench:
35064 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
35065 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
35067 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
35068 Twr=15ns, and this was already the setting in DDR_MODE)
35069 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
35071 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
35073 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
35075 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
35077 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
35079 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
35082 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
35083 Acked-by: Kim Phillips <kim.phillips@freescale.com>
35085 commit fc549c871f43933396a5b3e21d897023d4b31b8d
35086 Author: Michael Barkowski <michael.barkowski@freescale.com>
35087 Date: Thu Mar 20 13:15:28 2008 -0400
35089 mpc8323erdb: use readable DDR config macros
35091 Use available shift/mask macros to define DDR configuration.
35093 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
35094 Acked-by: Kim Phillips <kim.phillips@freescale.com>
35096 commit 89c7784ed90ba50301eec521144f95111e472906
35097 Author: Timur Tabi <timur@freescale.com>
35098 Date: Fri Feb 8 13:15:55 2008 -0600
35100 83xx: Add Vitesse VSC7385 firmware uploading
35102 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
35103 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
35104 Cleaned up the board header files to make selecting the VSC7385 easier to
35107 Signed-off-by: Timur Tabi <timur@freescale.com>
35108 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35110 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
35111 Author: Timur Tabi <timur@freescale.com>
35112 Date: Fri Feb 8 13:15:54 2008 -0600
35114 NET: Add Vitesse VSC7385 firmware uploading
35116 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
35117 and other boards. A small firwmare must be uploaded to its on-board memory
35118 before it can be enabled. This patch adds the code which uploads firmware
35119 (but not the firmware itself).
35121 Previously, this feature was provided by a U-Boot application that was
35122 made available only on Freescale BSPs. The VSC7385 firmware must still
35123 be obtained separately, but at least there is no longer a need for a separate
35126 Signed-off-by: Timur Tabi <timur@freescale.com>
35127 Acked-by: Ben Warren <biggerbadderben@gmail.com>
35129 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
35130 Author: Wolfgang Denk <wd@denx.de>
35131 Date: Wed Mar 26 00:52:10 2008 +0100
35133 Coding Style cleanyp; update CHANGELOG
35135 Signed-off-by: Wolfgang Denk <wd@denx.de>
35137 commit 43ddd9c820fec44816188f53346b464e20b3142d
35138 Author: Jerry Van Baren <gvb.uboot@gmail.com>
35139 Date: Sat Mar 22 14:23:49 2008 -0400
35141 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
35143 These defines embedded the u-boot env variables and/or the bd_t structure
35144 in the fdt blob. The conclusion of discussion on the u-boot email list
35145 was that embedding these in the fdt blob is not useful: there are better
35146 ways of passing the data (in fact, the fdt blob itself replaces the
35149 The only board that enables these is the stxxtc and they don't appear
35150 to be used by linux.
35152 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
35153 Acked-by: Kim Phillips <kim.phillips@freescale.com>
35155 commit 22ed2285743359fd1fe73e411dff914b2256e68f
35156 Author: Stefan Roese <sr@denx.de>
35157 Date: Mon Mar 17 10:49:25 2008 +0100
35159 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
35161 Signed-off-by: Stefan Roese <sr@denx.de>
35163 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
35164 Author: Kyungmin Park <kmpark@infradead.org>
35165 Date: Mon Mar 17 08:54:06 2008 +0900
35167 Add Flex-OneNAND booting support
35169 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
35170 using a NOR Flash interface. This on-chip integration enables system designers
35171 to reduce external system logic and use high-density NAND Flash
35172 in applications that would otherwise have to use more NOR components.
35174 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
35175 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
35176 that require low reliability and high density, SLC area of Flex-OneNAND
35177 to store data that need high reliability and high performance. Flex-OneNAND
35178 can let users take advantage of storing these two different types of data
35179 into one chip, which is making Flex-OneNAND more cost- and space-effective.
35181 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
35183 commit c512389cc4a10253249271ff6c887c6dab1f0db2
35184 Author: André Schwarz <andre.schwarz@matrix-vision.de>
35185 Date: Thu Mar 13 13:50:52 2008 +0100
35187 MPC5200: support setup without FEC
35189 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
35190 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
35192 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
35193 Acked-by: Grant Likely <grant.likely@secretlab.ca>
35195 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
35196 Author: Jon Loeliger <jdl@freescale.com>
35197 Date: Wed Mar 5 18:05:46 2008 -0600
35199 FSL: Move board/mpc8266ads under board/freescale
35201 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35203 commit 7f1d846e5c5754449c286587d099d85246062772
35204 Author: Jon Loeliger <jdl@freescale.com>
35205 Date: Wed Mar 5 18:05:47 2008 -0600
35207 FSL: Move board/mpc7448hpc2 under board/freescale
35209 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35211 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
35212 Author: Jon Loeliger <jdl@freescale.com>
35213 Date: Wed Mar 5 18:05:45 2008 -0600
35215 FSL: Move board/mpc8260ads under board/freescale
35217 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35219 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
35220 Author: goda.yusuke <goda.yusuke@renesas.com>
35221 Date: Wed Mar 5 17:08:33 2008 +0900
35223 net: Add support AX88796L ethernet device
35225 AX88796L is device of NE2000 compatible.
35226 This patch support AX88796L ethernet device.
35228 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
35229 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35231 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
35232 Author: Wolfgang Denk <wd@denx.de>
35233 Date: Tue Mar 25 22:50:41 2008 +0100
35235 ne2000 driver: change #ifdef to Makefile conditional compilation
35237 Signed-off-by: Wolfgang Denk <wd@denx.de>
35239 commit e710185aae90c64d39c2d453e40e58ceefe4f250
35240 Author: goda.yusuke <goda.yusuke@renesas.com>
35241 Date: Wed Mar 5 17:08:20 2008 +0900
35243 net: Divided code of NE2000 ethernet driver
35245 There are more devices of the NE2000 base.
35246 A present code is difficult for us to support more devices.
35247 To support more NE2000 clone devices, separated the function.
35249 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
35250 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35252 commit 395bce4f59a507a60a475f7ee46bed47de9482df
35253 Author: Mike Frysinger <vapier@gentoo.org>
35254 Date: Sun Feb 24 23:58:13 2008 -0500
35256 net/Blackfin: move on-chip MAC driver into drivers/net/
35258 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
35259 directory, but it is not board specific, so relocate it to the drivers dir
35260 so that other Blackfin ports can utilize it.
35262 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35264 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
35265 Author: Mike Frysinger <vapier@gentoo.org>
35266 Date: Sun Feb 24 23:52:35 2008 -0500
35268 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
35270 Since the "ssync" instruction may have hardware anomalies associated with
35271 it, have the smc91111 driver use the SSYNC macro rather than invoking it
35272 directly. We workaround all the anomalies via this macro.
35274 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35276 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
35277 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
35278 Date: Sun Feb 17 22:57:47 2008 +0000
35280 8xx: Update OF support on 8xx
35282 This patch does some shifting around of OF support on 8xx.
35284 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
35286 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
35287 Author: Kumar Gala <galak@kernel.crashing.org>
35288 Date: Fri Feb 15 15:16:18 2008 -0600
35290 ppc: Allow boards to specify how much memory they can map
35292 For historical reasons we limited the stack to 256M because some boards
35293 could only map that much via BATS. However newer boards are capable of
35294 mapping more memory (for example 85xx is capble of doing up to 2G).
35296 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35298 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
35299 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
35300 Date: Fri Feb 15 01:05:58 2008 +0000
35302 8xx : Add OF support to Adder875 board port - resubmit
35304 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
35306 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
35307 Author: Kumar Gala <galak@kernel.crashing.org>
35308 Date: Thu Feb 14 20:44:42 2008 -0600
35310 Add setexpr command
35312 Add a simple expr style command that will set an env variable as the result
35313 of the command. This allows us to do simple math in shell. The following
35314 operations are supported: &, |, ^, +, -, *, /.
35316 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35318 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
35319 Author: Jon Loeliger <jdl@freescale.com>
35320 Date: Wed Mar 5 17:27:48 2008 -0600
35322 FSL: Move board/mpc7448hpc2 under board/freescale
35324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35326 commit 449c703374a8868453425e15da7e2f76221b72e4
35327 Author: Jon Loeliger <jdl@freescale.com>
35328 Date: Wed Mar 5 17:21:43 2008 -0600
35330 FSL: Move board/mpc8266ads under board/freescale
35332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35334 commit 5863577989ad689427bb750107e9a75f1c1645d2
35335 Author: Jon Loeliger <jdl@freescale.com>
35336 Date: Wed Mar 5 16:41:41 2008 -0600
35338 FSL: Move board/mpc8260ads under board/freescale
35340 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35342 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
35343 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35344 Date: Tue Mar 25 21:30:08 2008 +0900
35346 [MIPS] Move gth2_config from ARM section to MIPS
35348 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35350 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
35351 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35352 Date: Tue Mar 25 21:30:07 2008 +0900
35354 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
35356 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35358 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
35359 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35360 Date: Tue Mar 25 21:30:07 2008 +0900
35362 [MIPS] Fix dcache_status()
35364 You can't judge UNCACHED by Config.K0 LSB.
35366 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35368 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
35369 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35370 Date: Tue Mar 25 21:30:07 2008 +0900
35372 [MIPS] Introduce _machine_restart
35374 Handles machine specific functions by using weak functions.
35376 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35378 commit decaba6f5cf386d569ac3997bebb871b966c6b18
35379 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35380 Date: Tue Mar 25 21:30:07 2008 +0900
35382 [MIPS] Cleanup CP0 Status initialization
35384 Add setup_c0_status from Linux. For the moment we disable interrupts, set
35385 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
35386 reset-time configuration and will work well across most processors.
35388 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35390 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
35391 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35392 Date: Tue Mar 25 21:30:07 2008 +0900
35394 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
35396 Without this change, we'll be suffering from deffered WATCH exception
35397 once Status.EXL is cleared. Make sure Cause.WP is cleared.
35399 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35401 commit 26138623230ca2bad3c78e05a65527ea70c8b688
35402 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35403 Date: Tue Mar 25 21:30:07 2008 +0900
35405 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
35407 Move things to appropriate place.
35409 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35411 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
35412 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35413 Date: Tue Mar 25 21:30:06 2008 +0900
35415 [MIPS] Implement flush_cache()
35417 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
35418 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
35419 function is used not only in U-Boot specfic programs but also at loading
35422 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35424 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
35425 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35426 Date: Tue Mar 25 21:30:06 2008 +0900
35428 [MIPS] Fix I-/D-cache initialization loops
35430 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
35431 again per a loop for I-cache initialization. But according to 'See MIPS
35432 Run', we're encouraged to use three separate loops rather than combining
35433 them *for both I- and D-cache*. This patch tries to fix this.
35435 In accordance with fixing above, mips_init_[id]cache are separated from
35436 mips_cache_reset(), and rewrite cache loops are completely rewritten with
35439 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35441 commit 1898840797c7f50799377bd5b285a8a93a82c419
35442 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35443 Date: Tue Mar 25 21:30:06 2008 +0900
35445 [MIPS] Replace memory clearance code with f_fill64
35447 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
35449 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35451 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
35452 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35453 Date: Tue Mar 25 21:30:06 2008 +0900
35455 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
35457 This patch replaces the current function definitions with NESTED, LEAF
35458 and END macro. They specify some more additional information about the
35459 function; an alignment of symbol, type of symbol, stack frame usage, etc.
35460 These information explicitly tells the assembler and the debugger about
35461 the types of code we want to generate.
35463 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35465 commit 282223a607c611425fa33f5428f8eae6636972bb
35466 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35467 Date: Tue Mar 25 11:43:17 2008 +0900
35469 [MIPS] asm headers' updates
35471 Make some asm headers adjusted to the latest Linux kernel.
35473 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35475 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
35476 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35477 Date: Tue Mar 25 11:39:29 2008 +0900
35479 [MIPS] Request for the 'mips_cache_lock()' removal
35481 The initial intension of having mips_cache_lock() was to use the cache
35482 as memory for temporary stack use so that a C environment can be set up
35483 as early as possible.
35485 But now mips_cache_lock() follow lowlevel_init(). We've already have the
35486 real memory initilaized at this point, therefore we could/should use it.
35487 No reason to lock at all.
35491 Cache locking is not consistent across MIPS implementaions. Some imple-
35492 mentations don't support locking at all. The style of locking varies -
35493 some support per line locking, others per way, etc. Some parts use bits
35494 in status registers instead of cache ops. Current mips_cache_lock() is
35495 not necessarily general-purpose.
35497 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
35498 they are never get unlocked, so the code relies on whatever gets loaded
35499 after U-Boot to re-initialize the cache and clear the locks. We're sup-
35500 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
35501 but leave the situation as it is for a long time.
35503 For these reasons, I proposed the removal of mips_cache_lock() from the
35504 global start-up code.
35506 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
35507 *things have changed*. If he wants the same behavior as before, he needs
35508 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
35510 If we don't have any regression report through several releases, then
35511 we'll remove codes entirely.
35513 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
35514 Acked-by: Andrew Dyer <amdyer@gmail.com>
35516 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
35517 Author: Yuri Tikhonov <yur@emcraft.com>
35518 Date: Mon Mar 24 11:30:54 2008 +0100
35520 lwmon5 SYSMON POST: fix backlight control
35522 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
35523 run on the board, then the SYSMON POST controls the display backlight
35524 (doesn't switch backlight ON if POST FAILED, and does switch the
35525 backlight ON if PASSED).
35527 If not, then the video driver controls the display backlight (just
35528 switch ON the backlight upon initialization).
35530 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35532 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
35533 Author: Yuri Tikhonov <yur@emcraft.com>
35534 Date: Mon Mar 24 11:29:14 2008 +0100
35536 lwmon5 SYSMON POST: fix handling of negative temperatures
35538 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
35540 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35542 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
35543 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35544 Date: Fri Mar 7 16:04:25 2008 +0900
35546 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
35548 In current source code, when the device number of PCI is 0, process PCI
35549 bridge without fail. However, when the device number is 0, it is not PCI
35550 always bridge. There are times when device of PCI allocates.
35552 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
35555 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35556 Acked-by: Stefan Roese <sr@denx.de>
35558 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
35559 Author: Yuri Tikhonov <yur@emcraft.com>
35560 Date: Fri Mar 21 09:18:40 2008 +0100
35562 LWMON5: fix dsPIC POST
35564 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
35566 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
35568 commit 388b82fddc7c05596f3f615f190da0448227dc82
35569 Author: Bartlomiej Sieka <tur@semihalf.com>
35570 Date: Thu Mar 20 23:23:13 2008 +0100
35572 [new uImage] Enable new uImage support for the pcs440ep board.
35574 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35576 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
35577 Author: Bartlomiej Sieka <tur@semihalf.com>
35578 Date: Thu Mar 20 23:23:13 2008 +0100
35580 [new uImage] Do not compile new uImage format support by default
35582 Disable default building of new uImage format support in preparation
35583 for merge with the master. Support for new format can be enabled on
35584 a per-board basis, by defining the following in the board's config file:
35586 #define CONFIG_FIT 1
35587 #define CONFIG_OF_LIBFDT 1
35589 This can be optionally defined to give more verbose output:
35591 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
35593 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35595 commit dafaede8a46c7159310239e036c93e31c6374487
35596 Author: Bartlomiej Sieka <tur@semihalf.com>
35597 Date: Thu Mar 20 23:20:31 2008 +0100
35599 [new uImage] Disable debuging output in preparation for merge with master
35601 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35603 commit fbe7a155027beacebaee9b32e1ada781fe924bca
35604 Author: Bartlomiej Sieka <tur@semihalf.com>
35605 Date: Thu Mar 20 19:38:45 2008 +0100
35607 [new uImage] Compilation and new uImage handling fixes for imxtract
35609 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
35610 include/config_cmd_default.h. Fix few warnings and handling of new format
35613 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35615 commit 36cc8cbb3379d5166f882641123521735c469f92
35616 Author: Bartlomiej Sieka <tur@semihalf.com>
35617 Date: Thu Mar 20 23:10:19 2008 +0100
35619 [new uImage] Fix autoscr command used with new uImage format
35621 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35623 commit 43142e817f0597be412e7cbe19413f5532eafa5d
35624 Author: Bartlomiej Sieka <tur@semihalf.com>
35625 Date: Thu Mar 20 23:10:19 2008 +0100
35627 [new uImage] Fix *.its files location in documentation
35629 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35631 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
35632 Author: Wolfgang Denk <wd@denx.de>
35633 Date: Thu Mar 20 22:01:38 2008 +0100
35635 lwmon5 POST: remove unreachable code
35637 plus some coding style cleanup
35639 Signed-off-by: Wolfgang Denk <wd@denx.de>
35641 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
35642 Author: Yuri Tikhonov <yur@emcraft.com>
35643 Date: Thu Mar 20 17:56:04 2008 +0300
35645 LWMON5: POST RTC fix
35647 Modify the RTC API to provide one a status for the time reported by
35648 the rtc_get() function:
35649 0 - a reliable time is guaranteed,
35650 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
35653 The RTC chip drivers are responsible for providing this info if the
35654 corresponding chip supports such functionality. If not - always
35655 report that the time is reliable.
35657 The POST RTC test was modified to detect the RTC faults utilizing
35658 this new rtc_get() feature.
35660 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35662 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
35663 Author: Martin Krause <martin.krause@tqs.de>
35664 Date: Wed Mar 19 14:25:14 2008 +0100
35666 TQM5200B: update MTD partition layout
35668 - insert partition for dtb blob to TQM5200B MTD layout
35669 - set env variables dependent on the configured board
35670 (TQM5200 or TQM5200B)
35672 Signed-off-by: Martin Krause <martin.krause@tqs.de>
35674 commit f0105727d132f56a21fa3ed8b162309cca6cac44
35675 Author: Stefan Roese <sr@denx.de>
35676 Date: Wed Mar 19 07:09:26 2008 +0100
35678 CFI: Small cleanup for FLASH_SHOW_PROGRESS
35680 With this patch we don't need that many #ifdef's in the code. It moves
35681 the subtraction into the macro and defines a NOP-macro when
35682 CONFIG_FLASH_SHOW_PROGRESS is not defined.
35684 Signed-off-by: Stefan Roese <sr@denx.de>
35685 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
35687 commit 9a042e9ca512beaaa2cb450274313fc477141241
35688 Author: Jerry Van Baren <gvb.uboot@gmail.com>
35689 Date: Sat Mar 8 13:48:01 2008 -0500
35691 Flash programming progress countdown.
35693 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
35695 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
35696 Author: Bartlomiej Sieka <tur@semihalf.com>
35697 Date: Wed Mar 19 10:00:06 2008 +0100
35699 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
35701 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35703 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
35704 Author: David Gibson <david@gibson.dropbear.id.au>
35705 Date: Mon Feb 18 18:09:04 2008 +1100
35707 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
35709 Since fdt_node_offset_by_compatible() was converted to the new
35710 fdt_next_node() iterator, a chunk of initialization code became
35711 redundant, but was not removed by oversight. This patch cleans it up.
35713 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
35715 commit d0ccb9b140b472039732de102fc14597eedb14df
35716 Author: David Gibson <david@gibson.dropbear.id.au>
35717 Date: Mon Feb 18 18:06:31 2008 +1100
35719 libfdt: Trivial cleanup for CHECK_HEADER)
35721 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
35722 However, there are a handful of functions (fdt_move, rw_check_header,
35723 fdt_open_into) from other files which could also use it (currently
35724 they open-code something more-or-less identical). Therefore, this
35725 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
35728 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
35730 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
35731 Author: Kumar Gala <galak@kernel.crashing.org>
35732 Date: Wed Feb 20 14:32:36 2008 -0600
35734 Fix fdt boardsetup command parsing
35736 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
35738 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35740 commit 804887e6001e2f00bea11431bf34d6d472512cda
35741 Author: Kumar Gala <galak@kernel.crashing.org>
35742 Date: Fri Feb 15 03:34:36 2008 -0600
35744 Add sub-commands to fdt
35746 fdt header - Display header info
35747 fdt bootcpu <id> - Set boot cpuid
35748 fdt memory <addr> <size> - Add/Update memory node
35749 fdt rsvmem print - Show current mem reserves
35750 fdt rsvmem add <addr> <size> - Add a mem reserve
35751 fdt rsvmem delete <index> - Delete a mem reserves
35753 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35755 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
35756 Author: David Gibson <david@gibson.dropbear.id.au>
35757 Date: Thu Feb 14 16:50:34 2008 +1100
35759 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
35761 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
35762 node which has NOP tags interspersed with its properties. In this
35763 case fdt_add_subnode_namelen() will put the new subnode before the
35764 first NOP tag, even if there are properties after it, which will
35765 result in an invalid blob.
35767 This patch fixes the bug, and adds a testcase for it.
35769 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
35771 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
35772 Author: David Gibson <david@gibson.dropbear.id.au>
35773 Date: Tue Feb 12 11:58:31 2008 +1100
35775 libfdt: Add and use a node iteration helper function.
35777 This patch adds an fdt_next_node() function which can be used to
35778 iterate through nodes of the tree while keeping track of depth. This
35779 function is used to simplify the iteration code in a lot of other
35780 functions, and is also exported for use by library users.
35782 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
35784 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
35785 Author: David Gibson <david@gibson.dropbear.id.au>
35786 Date: Fri Jan 11 14:55:05 2008 +1100
35788 libfdt: Add fdt_set_name() function
35790 This patch adds an fdt_set_name() function to libfdt, mirroring
35791 fdt_get_name(). This is a r/w function which alters the name of a
35792 given device tree node.
35794 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
35796 commit 23e20aa6488e6c0622496549861bfdc74108debe
35797 Author: Yuri Tikhonov <yur@pollux.denx.de>
35798 Date: Tue Mar 18 13:33:30 2008 +0100
35800 lwmon5: Fix register test logic to match the specific GDC h/w.
35802 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35803 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35805 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
35806 Author: Yuri Tikhonov <yur@pollux.denx.de>
35807 Date: Tue Mar 18 13:27:57 2008 +0100
35809 Fix backlight in the lwmon5 POST.
35811 Backlight was switched on even when temperature was too low.
35813 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35814 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35816 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
35817 Author: Yuri Tikhonov <yur@pollux.denx.de>
35818 Date: Wed Feb 6 18:48:36 2008 +0100
35820 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
35822 To enable this, alternative, configuration the U-Boot board configuration
35823 file for lwmon5 includes the definitions of alternative addresses for header
35824 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
35826 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
35827 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
35828 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
35830 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35832 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
35833 Author: Yuri Tikhonov <yur@pollux.denx.de>
35834 Date: Mon Feb 4 17:11:53 2008 +0100
35836 Add support for the lwmon5 board reset via GPIO58.
35838 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35839 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35841 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
35842 Author: Yuri Tikhonov <yur@pollux.denx.de>
35843 Date: Mon Feb 4 17:09:55 2008 +0100
35845 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
35847 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35848 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35850 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
35851 Author: Yuri Tikhonov <yur@pollux.denx.de>
35852 Date: Mon Feb 4 14:11:03 2008 +0100
35854 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
35856 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35857 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35859 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
35860 Author: Yuri Tikhonov <yur@pollux.denx.de>
35861 Date: Mon Feb 4 14:10:42 2008 +0100
35863 The patch adds new POST tests for the Lwmon5 board. These are:
35865 * External Watchdog test;
35871 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35872 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35874 commit c2ed33efbfff5767bca236828e021c55fd547b6c
35875 Author: Yuri Tikhonov <yur@pollux.denx.de>
35876 Date: Mon Feb 4 14:10:01 2008 +0100
35878 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
35880 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35882 commit 3a5d1e7f1309998791702b2a559e3126781746b9
35883 Author: Yuri Tikhonov <yur@pollux.denx.de>
35884 Date: Tue Mar 18 13:33:30 2008 +0100
35886 lwmon5: Fix register test logic to match the specific GDC h/w.
35888 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35889 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35891 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
35892 Author: Yuri Tikhonov <yur@pollux.denx.de>
35893 Date: Tue Mar 18 13:27:57 2008 +0100
35895 Fix backlight in the lwmon5 POST.
35897 Backlight was switcehd on even when temperature was too low.
35899 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35900 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35902 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
35903 Author: Yuri Tikhonov <yur@pollux.denx.de>
35904 Date: Wed Feb 6 18:48:36 2008 +0100
35906 The patch introduces the alternative configuration of the log buffer for
35907 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
35908 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
35909 PPC440EPX_GPT0_COMP5).
35911 To enable this, alternative, configuration the U-Boot board configuration
35912 file for lwmon5 includes the definitions of alternative addresses for header
35913 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
35915 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
35916 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
35917 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
35919 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35921 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
35922 Author: Yuri Tikhonov <yur@pollux.denx.de>
35923 Date: Mon Feb 4 17:11:53 2008 +0100
35925 Add support for the lwmon5 board reset via GPIO58.
35927 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35928 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35930 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
35931 Author: Yuri Tikhonov <yur@pollux.denx.de>
35932 Date: Mon Feb 4 17:09:55 2008 +0100
35934 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
35935 Disable external watch-dog for now.
35937 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35938 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35940 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
35941 Author: Yuri Tikhonov <yur@pollux.denx.de>
35942 Date: Mon Feb 4 14:11:03 2008 +0100
35944 The patch introduces the CRITICAL feature of POST tests. If the test
35945 marked as POST_CRITICAL fails then the alternative, post_critical,
35946 boot-command is used. If this command is not defined then U-Boot
35947 enters into interactive mode.
35949 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35950 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35952 commit 65b20dcefc89618193fa51947968dada91e4c778
35953 Author: Yuri Tikhonov <yur@pollux.denx.de>
35954 Date: Mon Feb 4 14:10:42 2008 +0100
35956 The patch adds new POST tests for the Lwmon5 board.
35959 * External Watchdog test;
35965 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35966 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35968 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
35969 Author: Yuri Tikhonov <yur@pollux.denx.de>
35970 Date: Mon Feb 4 14:10:01 2008 +0100
35972 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
35974 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35976 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
35977 Author: Wolfgang Denk <wd@denx.de>
35978 Date: Tue Mar 18 17:35:51 2008 +0100
35980 HMI1001: fix compile problem.
35982 Signed-off-by: Wolfgang Denk <wd@denx.de>
35984 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
35985 Author: Mike Frysinger <vapier@gentoo.org>
35986 Date: Mon Feb 18 05:32:30 2008 -0500
35988 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
35990 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
35991 for the board specific driver at all. Just use the common CFI driver.
35993 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35995 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
35996 Author: Mike Frysinger <vapier@gentoo.org>
35997 Date: Tue Feb 19 00:36:14 2008 -0500
35999 Blackfin: add proper ELF markings to some assembly functions
36001 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36003 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
36004 Author: Mike Frysinger <vapier@gentoo.org>
36005 Date: Tue Feb 19 00:35:17 2008 -0500
36007 Blackfin: new cplbinfo command for viewing cplb tables
36009 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36011 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
36012 Author: Mike Frysinger <vapier@gentoo.org>
36013 Date: Mon Feb 18 05:37:51 2008 -0500
36015 Blackfin: update MAINTAINERS list
36017 Add maintainer information for the Blackfin boards.
36019 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36021 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
36022 Author: Mike Frysinger <vapier@gentoo.org>
36023 Date: Mon Feb 18 05:26:48 2008 -0500
36025 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
36027 Stop tying things to the processor that should be tied to other defines and
36028 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
36029 system to select the -mcpu option.
36031 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36033 commit 86a20fb920bd198105acf7b1191117f566d637ed
36034 Author: Mike Frysinger <vapier@gentoo.org>
36035 Date: Sat Feb 16 07:40:36 2008 -0500
36037 Blackfin: move bootldr command to common code
36039 This moves the Blackfin-common bootldr command out of the BF537-STAMP
36040 specific board directory and into the common directory so that all Blackfin
36041 boards may utilize it.
36043 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36045 commit decbe029b2a9d3333d02c433389b1c821eea96d7
36046 Author: Heiko Schocher <hs@denx.de>
36047 Date: Fri Mar 14 11:05:20 2008 +0100
36049 mgcoge: update configuration
36051 Fix configuration for mgcoge board
36053 Signed-off-by: Heiko Schocher <hs@denx.de>
36055 commit c136724cda0219c49f1d4b346f00da29b14fdf14
36056 Author: Wolfgang Denk <wd@denx.de>
36057 Date: Sun Mar 16 01:22:59 2008 +0100
36059 drivers/rtc/Makefile: keep list sorted
36061 Signed-off-by: Wolfgang Denk <wd@denx.de>
36063 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
36064 Author: Tor Krill <tor@excito.com>
36065 Date: Sat Mar 15 15:40:26 2008 +0100
36067 Add support for Intersil isl1208 RTC
36069 Signed-off-by: Tor Krill <tor@excito.com>
36071 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
36072 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36073 Date: Sat Mar 15 17:36:41 2008 +0100
36077 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36079 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
36080 Author: Wolfgang Denk <wd@denx.de>
36081 Date: Sun Mar 16 01:12:58 2008 +0100
36083 Conding style cleanup
36085 Signed-off-by: Wolfgang Denk <wd@denx.de>
36087 commit 41712b4e8c95dff23354bcd620e1f9477160c190
36088 Author: Stefan Roese <sr@denx.de>
36089 Date: Wed Mar 5 12:31:53 2008 +0100
36091 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
36093 This patch adds USB OHCI support to the Canyonlands board port. It also
36094 enables EXT2 support.
36096 Signed-off-by: Stefan Roese <sr@denx.de>
36098 commit 2596f5b9d353ff3e4387a3325d05740f16958038
36099 Author: Stefan Roese <sr@denx.de>
36100 Date: Wed Mar 5 12:29:32 2008 +0100
36102 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
36104 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
36105 way a board just needs to define this new option to enable the "force
36106 NoPowerSwitching mode" instead of adding new CPU/architecture defines
36107 to the USB source itself.
36109 This new option will be used first with the new AMCC 460EX Canyonlands
36110 board port, which will be posted in a few days.
36112 This patch also fixes a small compilation problem when DEBUG is enabled.
36114 Signed-off-by: Stefan Roese <sr@denx.de>
36116 commit 71665ebf88408ff2acb762af47989fd4365b321a
36117 Author: Stefan Roese <sr@denx.de>
36118 Date: Mon Mar 3 17:27:02 2008 +0100
36120 ppc4xx: Add Canyonlands NAND booting support
36122 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
36123 NAND devices. The only bootstrap option for NAND booting is option F for
36124 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
36125 EEPROM needs to be programmed accordingly.
36127 This patch adds basic NAND booting support for the AMCC Canyonlands aval
36128 board and also adds support to the "bootstrap" command, to enable NAND
36129 booting I2C setting.
36131 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
36133 Signed-off-by: Stefan Roese <sr@denx.de>
36135 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
36136 Author: Stefan Roese <sr@denx.de>
36137 Date: Tue Mar 11 16:53:00 2008 +0100
36139 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
36141 This patch adds support for the AMCC Canyonlands 460EX evaluation
36144 Signed-off-by: Stefan Roese <sr@denx.de>
36146 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
36147 Author: Stefan Roese <sr@denx.de>
36148 Date: Tue Mar 11 16:52:24 2008 +0100
36150 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
36152 This patch adds support for the AMCC Canyonlands 460EX evaluation
36155 Signed-off-by: Stefan Roese <sr@denx.de>
36157 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
36158 Author: Stefan Roese <sr@denx.de>
36159 Date: Tue Mar 11 16:51:17 2008 +0100
36161 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
36163 This patch adds support for the AMCC Canyonlands 460EX evaluation
36166 Signed-off-by: Stefan Roese <sr@denx.de>
36168 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
36169 Author: Stefan Roese <sr@denx.de>
36170 Date: Tue Mar 11 15:11:43 2008 +0100
36172 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
36174 This patch adds basic support for the AMCC 460EX/460GT PPC's.
36176 Signed-off-by: Stefan Roese <sr@denx.de>
36178 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
36179 Author: Stefan Roese <sr@denx.de>
36180 Date: Tue Mar 11 15:11:18 2008 +0100
36182 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
36184 This patch adds basic support for the AMCC 460EX/460GT PPC's.
36186 Signed-off-by: Stefan Roese <sr@denx.de>
36188 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
36189 Author: Stefan Roese <sr@denx.de>
36190 Date: Tue Mar 11 15:07:10 2008 +0100
36192 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
36194 This patch adds basic support for the AMCC 460EX/460GT PPC's.
36196 Signed-off-by: Stefan Roese <sr@denx.de>
36198 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
36199 Author: Stefan Roese <sr@denx.de>
36200 Date: Tue Mar 11 15:05:50 2008 +0100
36202 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
36204 This patch adds basic support for the AMCC 460EX/460GT PPC's.
36206 Signed-off-by: Stefan Roese <sr@denx.de>
36208 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
36209 Author: Stefan Roese <sr@denx.de>
36210 Date: Tue Mar 11 15:05:26 2008 +0100
36212 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
36214 This patch adds basic support for the AMCC 460EX/460GT PPC's.
36216 Signed-off-by: Stefan Roese <sr@denx.de>
36218 commit 56e410178375d9f20be25fb24e180974f0ae120b
36219 Author: Stefan Roese <sr@denx.de>
36220 Date: Tue Feb 19 22:07:57 2008 +0100
36222 ppc4xx: interrupt.c reworked
36224 This patch is a rework of the 4xx interrupt handling done while
36225 adding the 460EX/GT support. Interrupts are needed on 4xx for the
36228 Signed-off-by: Stefan Roese <sr@denx.de>
36230 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
36231 Author: Stefan Roese <sr@denx.de>
36232 Date: Tue Feb 19 22:01:57 2008 +0100
36234 ppc4xx: program_tlb now uses 64bit physical addess
36236 This patch changes the physical addess parameter from 32bit to 64bit.
36237 This is needed for 36bit 4xx platforms to access areas located
36238 beyond the 4GB border, like SoC peripherals (EBC etc.).
36240 Signed-off-by: Stefan Roese <sr@denx.de>
36242 commit c3307fa186af85771924c434997089b8104c0a46
36243 Author: Stefan Roese <sr@denx.de>
36244 Date: Tue Feb 19 21:58:25 2008 +0100
36246 ppc4xx: miiphy.c reworked
36248 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
36249 badly neede some cleanup.
36251 Signed-off-by: Stefan Roese <sr@denx.de>
36253 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
36254 Author: Stefan Roese <sr@denx.de>
36255 Date: Tue Feb 19 16:21:49 2008 +0100
36257 rtc: Add M41T62 support
36259 This patch add support for the STM M41T62 RTC. It is used and tested
36260 on the AMCC Canyonlands 406EX platform.
36262 Signed-off-by: Stefan Roese <sr@denx.de>
36264 commit 217d383e201adc7f2271145ae345ea5eae2b7170
36265 Author: Niklaus Giger <niklaus.giger@netstal.com>
36266 Date: Mon Feb 25 18:46:43 2008 +0100
36268 ppc4xx: Add 405GPr based MCU25 board specific files
36270 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36272 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
36273 Author: Niklaus Giger <niklaus.giger@netstal.com>
36274 Date: Mon Feb 25 18:46:42 2008 +0100
36276 ppc4xx: Add 405GPr based MCU25 board config file
36278 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36280 commit b05f35436b733a240559e77e46bed8439665ecc5
36281 Author: Niklaus Giger <niklaus.giger@netstal.com>
36282 Date: Mon Feb 25 18:46:41 2008 +0100
36284 ppc4xx: Add 405GPr based MCU25 board. Global files
36286 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36288 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
36289 Author: Niklaus Giger <niklaus.giger@netstal.com>
36290 Date: Mon Feb 25 18:37:02 2008 +0100
36292 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
36294 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36296 commit a079494853cc2bfeddb26673219db0b4b2b31566
36297 Author: Niklaus Giger <niklaus.giger@netstal.com>
36298 Date: Mon Feb 25 18:37:01 2008 +0100
36300 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
36302 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
36303 the FLASH_CFI_LEGACY et al. config options.
36305 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
36307 commit e4170e5a50c8110f792bc37472833ae669d69951
36308 Author: Stefan Roese <sr@denx.de>
36309 Date: Tue Mar 11 13:52:25 2008 +0100
36311 ppc4xx: Fix comment in 405EX DDR2 init code
36313 Signed-off-by: Stefan Roese <sr@denx.de>
36315 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
36316 Author: Bartlomiej Sieka <tur@semihalf.com>
36317 Date: Fri Mar 14 16:22:34 2008 +0100
36319 Add MD5 support to the new uImage format
36321 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36323 commit 0ede0c383530a418cf98be9122371a86573cd0db
36324 Author: Bartlomiej Sieka <tur@semihalf.com>
36325 Date: Fri Mar 14 16:22:34 2008 +0100
36327 Add the MD5 algorithm
36329 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
36330 calculated using the md5() function -- see include/md5.h for details.
36332 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36334 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
36335 Author: Wolfgang Denk <wd@denx.de>
36336 Date: Fri Mar 14 16:04:54 2008 +0100
36338 tools/setlocalversion: use a git-describe-ish format
36340 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
36341 where 'nnnnn' is the number of commits since the last tag (i.e.,
36342 1.3.2-rc3). This makes it much easier to recognize "newer" versions
36343 and to see how much has been changed since the referenced tag.
36345 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
36347 Signed-off-by: Wolfgang Denk <wd@denx.de>
36349 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
36350 Author: Wolfgang Denk <wd@denx.de>
36351 Date: Thu Mar 13 14:32:03 2008 +0100
36353 HMI1001: add support for MPC5200 Rev. B processors.
36355 Signed-off-by: Wolfgang Denk <wd@denx.de>
36357 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
36358 Author: Wolfgang Denk <wd@denx.de>
36359 Date: Thu Mar 13 14:29:49 2008 +0100
36361 TQM5200: remove dead code
36363 This board never used a MGT5100 processor.
36365 Signed-off-by: Wolfgang Denk <wd@denx.de>
36367 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
36368 Author: Marian Balakowicz <m8@semihalf.com>
36369 Date: Wed Mar 12 12:14:15 2008 +0100
36371 [new uImage] Fix build issue on ARM
36373 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
36375 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36377 commit 3310c549a73a949430bfda90876df7552a1dab0c
36378 Author: Marian Balakowicz <m8@semihalf.com>
36379 Date: Wed Mar 12 12:13:13 2008 +0100
36381 [new uImage] Add new uImage format documentation and examples
36383 Create doc/uImage.FIT documentation directory with the following files:
36384 - command_syntax_extensions.txt : extended command syntax description
36385 - howto.txt : short usage howto
36386 - source_file_format.txt : internal new uImage format description
36388 Add example image source files:
36393 Update README appropriately.
36395 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36396 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36398 commit 1ec73761d2e247078f4520a265d463e8b73391a2
36399 Author: Marian Balakowicz <m8@semihalf.com>
36400 Date: Wed Mar 12 10:35:52 2008 +0100
36402 [new uImage] Fix definition of common bootm_headers_t fields
36404 verify, autostart and lmb fields are used regardless of CONFIG_FIT
36405 setting, move their definitions to common section.
36407 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36409 commit 1d1cb4270edc6a99276834064069717f9782c491
36410 Author: Marian Balakowicz <m8@semihalf.com>
36411 Date: Wed Mar 12 10:35:51 2008 +0100
36413 [new uImage] Fix build problems on trab board
36415 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36417 commit f773bea8e11f4a11c388dcee956b2444203e6b65
36418 Author: Marian Balakowicz <m8@semihalf.com>
36419 Date: Wed Mar 12 10:35:46 2008 +0100
36421 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
36423 Save FIT configuration provied in the first bootm argument and use it
36424 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
36425 arguments are not specified.
36427 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36429 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
36430 Author: Marian Balakowicz <m8@semihalf.com>
36431 Date: Wed Mar 12 10:33:01 2008 +0100
36433 [new uImage] More verbose kernel image uncompress error message
36435 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36437 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
36438 Author: Marian Balakowicz <m8@semihalf.com>
36439 Date: Wed Mar 12 10:33:01 2008 +0100
36441 [new uImage] Use show_boot_progress() for new uImage format
36443 This patch allocates a set of show_boot_progress() IDs for new uImage format
36444 and adds show_boot_progress() calls in new uImage format handling code.
36446 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36448 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
36449 Author: Marian Balakowicz <m8@semihalf.com>
36450 Date: Wed Mar 12 10:33:01 2008 +0100
36452 [new uImage] Add new uImage fromat support to fpga command
36454 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36456 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
36457 Author: Marian Balakowicz <m8@semihalf.com>
36458 Date: Wed Mar 12 10:33:01 2008 +0100
36460 [new uImage] Add new uImage format handling to other bootm related commands
36464 docboot - cmd_doc.c
36465 fdcboot - cmd_fdc.c
36466 diskboot - cmd_ide.c
36468 scsiboot - cmd_scsi.c
36469 usbboot - cmd_usb.c
36471 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36473 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
36474 Author: Marian Balakowicz <m8@semihalf.com>
36475 Date: Wed Mar 12 10:33:00 2008 +0100
36477 [new uImage] Add new uImage format support to imgextract command
36479 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36481 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
36482 Author: Marian Balakowicz <m8@semihalf.com>
36483 Date: Wed Mar 12 10:33:00 2008 +0100
36485 [new uImage] Add new uImage format support to autoscript routine
36487 autoscript() routine is updated to accept second argument, which
36488 is only used for FIT images and provides a FIT subimage unit name.
36490 autoscript() routine callers must now pass two arguments. For
36491 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
36492 variable 'autoscript_uname' is introduced and used as a FIT
36493 subimage unit name source.
36495 autoscript command accepts extended syntax of the addr argument:
36496 addr:<subimg_uname>
36498 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36500 commit cd7c596e9f561dbbc17b717277438aee78cde14f
36501 Author: Marian Balakowicz <m8@semihalf.com>
36502 Date: Wed Mar 12 10:33:00 2008 +0100
36504 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
36506 This patch updates architecture specific implementations of
36507 do_bootm_linux() adding new uImage format handling for
36508 operations like get kernel entry point address, get kernel
36509 image data start address.
36511 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36513 commit 3dfe110149311425919e6d6a14b561b4207498f1
36514 Author: Marian Balakowicz <m8@semihalf.com>
36515 Date: Wed Mar 12 10:32:59 2008 +0100
36517 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
36519 This patch adds new node offset fields to struct bootm_headers
36520 and updates bootm_headers processing code to make use of them.
36521 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
36523 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36525 commit bc8ed486b125452ba3bd8344f052f437329150c5
36526 Author: Marian Balakowicz <m8@semihalf.com>
36527 Date: Wed Mar 12 10:32:53 2008 +0100
36529 [new uImage] ppc: Add new uImage format support to FDT handling routines
36531 Support for new (FIT) format uImages is added to powerpc specific
36532 boot_get_fdt() routine which now recognizes, sanity checks FIT image
36533 and is able to access data sections of the requested component image.
36535 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36537 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
36538 Author: Marian Balakowicz <m8@semihalf.com>
36539 Date: Wed Mar 12 10:14:57 2008 +0100
36541 [new uImage] Re-enable interrupts for non automatic booting
36543 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
36544 environment variable is not set to 'yes'.
36546 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36548 commit d985c8498c4e47095820da97aa722381d39172c5
36549 Author: Marian Balakowicz <m8@semihalf.com>
36550 Date: Wed Mar 12 10:14:38 2008 +0100
36552 [new uImage] Remove unnecessary arguments passed to ramdisk routines
36554 boot_get_ramdisk() and image_get_ramdisk() do not need all
36555 cmdtp, flag, argc and argv arguments. Simplify routines definition.
36557 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36559 commit c87796483bc7c2900470dc747c367f602577608d
36560 Author: Marian Balakowicz <m8@semihalf.com>
36561 Date: Wed Mar 12 10:12:37 2008 +0100
36563 [new uImage] Add new uImage format support for ramdisk handling
36565 This patch updates boot_get_ramdisk() routine adding format
36566 verification and handling for new (FIT) uImages.
36568 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36570 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
36571 Author: Marian Balakowicz <m8@semihalf.com>
36572 Date: Wed Mar 12 10:01:05 2008 +0100
36574 [new uImage] Add new uImage format support for kernel booting
36576 New format uImages are recognized by the bootm command,
36577 validity of specified kernel component image is checked and
36578 its data section located and used for further processing
36579 (uncompress, load, etc.)
36581 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36583 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
36584 Author: Marian Balakowicz <m8@semihalf.com>
36585 Date: Tue Mar 11 12:35:20 2008 +0100
36587 [new uImage] Add new uImage format support for imls and iminfo commands
36589 imls and iminfo can now recognize nad print out contents of the new (FIT)
36592 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36594 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
36595 Author: Bartlomiej Sieka <tur@semihalf.com>
36596 Date: Tue Mar 11 12:34:47 2008 +0100
36598 [new uImage] Add support for new uImage format to mkimage tool
36600 Support for the new uImage format (FIT) is added to mkimage tool.
36601 Commandline syntax is appropriately extended:
36603 mkimage [-D dtc_options] -f fit-image.its fit-image
36605 mkimage (together with dtc) takes fit-image.its and referenced therein
36606 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
36607 final image that can be transferred to the target (e.g., via tftp) and then
36608 booted using the bootm command in U-Boot.
36610 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36612 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
36613 Author: Marian Balakowicz <m8@semihalf.com>
36614 Date: Mon Mar 10 17:53:49 2008 +0100
36616 [new uImage] Make node unit names const in struct bootm_headers
36618 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36620 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
36621 Author: Marian Balakowicz <m8@semihalf.com>
36622 Date: Fri Feb 29 21:24:06 2008 +0100
36624 [new uImage] New uImage low-level API
36626 Add FDT-based functions for handling new format component images,
36627 configurations, node operations, property get/set, etc.
36629 fit_ - routines handling global new format uImage operations
36630 like get/set top level property, process all nodes, etc.
36631 fit_image_ - routines handling component images subnodes
36632 fit_conf_ - routines handling configurations node
36634 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36635 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36637 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
36638 Author: Wolfgang Denk <wd@denx.de>
36639 Date: Sun Mar 9 16:20:02 2008 +0100
36643 Update CHANGELOG for release.
36645 Signed-off-by: Wolfgang Denk <wd@denx.de>
36647 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
36648 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36649 Date: Sun Mar 9 14:52:11 2008 +0100
36651 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
36653 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36654 Signed-off-by: Wolfgang Denk <wd@denx.de>
36656 commit db695b78515ddb88a2d4f3357c120345efbf59ec
36657 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36658 Date: Sun Mar 9 10:44:01 2008 +0100
36660 scb9328: Fix flash warning: type qualifiers ignored on function return type
36662 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36664 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
36665 Author: Wolfgang Denk <wd@denx.de>
36666 Date: Sun Mar 9 10:50:41 2008 +0100
36668 esd/common/fpga.c: fix indentation.
36670 Signed-off-by: Wolfgang Denk <wd@denx.de>
36672 commit cc3843e36453e2b8db65d7e56de938ba045016a0
36673 Author: Wolfgang Denk <wd@denx.de>
36674 Date: Sun Mar 9 10:33:31 2008 +0100
36676 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
36678 and get rid of a couple of unneeded casts.
36680 Signed-off-by: Wolfgang Denk <wd@denx.de>
36682 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
36683 Author: Wolfgang Denk <wd@denx.de>
36684 Date: Sun Mar 9 10:09:53 2008 +0100
36686 esd/common/fpga.c: fix 'assignment of read-only location' error
36688 Signed-off-by: Wolfgang Denk <wd@denx.de>
36690 commit c6fe4dabac066e8758345d249032768496983a3e
36691 Author: Wolfgang Denk <wd@denx.de>
36692 Date: Sun Mar 9 02:13:19 2008 +0100
36694 Makefile: make build silently again.
36696 Signed-off-by: Wolfgang Denk <wd@denx.de>
36698 commit 76babc86576f092573599334c85ec543fdbc6015
36699 Author: Wolfgang Denk <wd@denx.de>
36700 Date: Sun Mar 9 02:07:49 2008 +0100
36702 m501sk: Fix out of tree building
36704 Signed-off-by: Wolfgang Denk <wd@denx.de>
36706 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
36707 Author: Wolfgang Denk <wd@denx.de>
36708 Date: Sun Mar 9 00:06:09 2008 +0100
36710 ADS5121: fix out of tree build
36712 and simplify Makefile a bit.
36714 Signed-off-by: Wolfgang Denk <wd@denx.de>
36716 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
36717 Author: Wolfgang Denk <wd@denx.de>
36718 Date: Sat Mar 8 22:35:31 2008 +0100
36722 Signed-off-by: Wolfgang Denk <wd@denx.de>
36724 commit 78a90f827df74520e939c794fc7413dace21c4db
36725 Author: Wolfgang Denk <wd@denx.de>
36726 Date: Sat Mar 8 22:35:04 2008 +0100
36730 Signed-off-by: Wolfgang Denk <wd@denx.de>
36732 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
36733 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36734 Date: Sat Mar 8 21:30:04 2008 +0100
36736 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
36738 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36740 commit d75469d48c05795144f4b8ba76addbb4920a7bba
36741 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
36742 Date: Sat Mar 8 09:25:49 2008 +0900
36744 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
36746 When rtl_recv() of rtl8169 is called, OWNbit of status register
36747 is not enable occasionally.
36748 rtl_recv() doesn't work normally when the driver doesn't do
36749 appropriate processing.
36750 This patch fix this problem.
36752 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
36754 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
36755 Author: Heiko Schocher <hs@denx.de>
36756 Date: Fri Mar 7 08:15:28 2008 +0100
36758 mgsuvd: update board configuration
36760 initialize the UPIOx controller.
36762 Signed-off-by: Heiko Schocher <hs@denx.de>
36764 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
36765 Author: Heiko Schocher <hs@denx.de>
36766 Date: Fri Mar 7 08:13:41 2008 +0100
36768 mgcoge: update board configuration
36770 add support for the config Flash.
36771 initialize the UPIOx controller.
36773 Signed-off-by: Heiko Schocher <hs@denx.de>
36775 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
36776 Author: Kim Phillips <kim.phillips@freescale.com>
36777 Date: Fri Mar 7 12:27:31 2008 -0600
36779 mpc83xx: make dtb basename file references equal those of linux
36781 the dts file basenames were updated in linux - this helps avoid
36782 inadvertently loading any old dtbs laying around.
36784 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36786 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
36787 Author: Kim Phillips <kim.phillips@freescale.com>
36788 Date: Wed Feb 27 16:08:22 2008 -0600
36790 net: uec_phy: actually increment the timeout counter
36792 allow u-boot to recover (and, e.g., switch to another interface) in the
36793 case where a PHY does not report autonegotiation is complete within its
36794 two second timeout value.
36796 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36798 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
36799 Author: Markus Brunner <super.firetwister@googlemail.com>
36800 Date: Wed Mar 5 21:38:12 2008 +0100
36802 fix taihu soft spi_read
36804 The taihu board used gpio_read_out_bit which reads the output register and not
36807 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
36809 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
36810 Author: Stefan Roese <sr@denx.de>
36811 Date: Fri Mar 7 08:01:43 2008 +0100
36813 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
36815 Signed-off-by: Stefan Roese <sr@denx.de>
36817 commit bd4458cb47abecabd406b1210457be96c69fc49d
36818 Author: Dave Liu <r63238@freescale.com>
36819 Date: Tue Mar 4 16:59:22 2008 +0800
36821 837xEMDS: Improve the system performance
36823 1. Make the CSB bus pipeline depth as 4, and enable
36825 2. Raise the eTSEC emergency priority;
36826 3. Use the highest IP blocks clock.
36828 Signed-off-by: Dave Liu <daveliu@freescale.com>
36830 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
36831 Author: Detlev Zundel <dzu@denx.de>
36832 Date: Thu Mar 6 16:45:53 2008 +0100
36834 Replace "run load; run update" with conditionalized "run load update".
36836 The latter version stops when "run load" fails for whatever reasons
36837 rendering the combination *a lot* more secure.
36839 Signed-off-by: Detlev Zundel <dzu@denx.de>
36841 commit 6bc113886d7d316df1a4e459bec8baf027518551
36842 Author: Stefan Roese <sr@denx.de>
36843 Date: Tue Mar 4 17:40:41 2008 +0100
36845 net: Print error message upon net usage when no ethernet-interface is found
36847 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
36848 defined. Then no ethernet interface is available but a simple "tftp"
36849 command will return without any error message which is quite confusing.
36851 Signed-off-by: Stefan Roese <sr@denx.de>
36853 commit a30a549a3553032d809e0356306b62de0b125901
36854 Author: Jon Loeliger <jdl@freescale.com>
36855 Date: Tue Mar 4 10:03:03 2008 -0600
36857 Remove erroneous or extra spd.h #includers.
36859 Many of the spd.h #includers don't need it,
36860 and wanted to have spd_sdram() declared instead.
36861 Since they didn't get that, some also had open
36862 coded extern declarations of it instead or as well.
36863 Fix it all up by using spd_sdram.h where needed.
36865 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36867 commit a4475386cef14af3fd88f0518b688e755669486d
36868 Author: Wolfgang Denk <wd@denx.de>
36869 Date: Tue Mar 4 17:41:28 2008 +0100
36871 PCS440EP: fix build problems (redundant #define)
36873 Signed-off-by: Wolfgang Denk <wd@denx.de>
36875 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
36876 Author: Stefan Roese <sr@denx.de>
36877 Date: Tue Mar 4 17:39:25 2008 +0100
36879 net: Print error message upon net usage when no ethernet-interface is found
36881 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
36882 defined. Then no ethernet interface is available but a simple "tftp"
36883 command will return without any error message which is quite confusing.
36885 Signed-off-by: Stefan Roese <sr@denx.de>
36887 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
36888 Author: Wolfgang Denk <wd@denx.de>
36889 Date: Tue Mar 4 17:38:50 2008 +0100
36891 W7OLMC/W7OLMG: fix build problems (redundant #define)
36893 Signed-off-by: Wolfgang Denk <wd@denx.de>
36895 commit f9301e1cda296245ba052d7b08321199c3d0af9d
36896 Author: Wolfgang Denk <wd@denx.de>
36897 Date: Tue Mar 4 14:58:31 2008 +0100
36899 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
36901 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
36902 problem for out-of-tree builds which caused "make clean" to fail.
36904 Signed-off-by: Wolfgang Denk <wd@denx.de>
36906 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
36907 Author: Wolfgang Denk <wd@denx.de>
36908 Date: Tue Mar 4 11:58:26 2008 +0100
36910 examples/Makefile: build "hello_world" on 8xx, too.
36912 Signed-off-by: Wolfgang Denk <wd@denx.de>
36914 commit 74eb0222594fd23aafdf168e60e872814eea8b62
36915 Author: Mike Nuss <mike@terascala.com>
36916 Date: Mon Mar 3 15:27:05 2008 -0500
36918 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
36920 Every now and then a Sequoia board (or equivalent hardware) had
36921 problems connecting to a Gigabit capable network interface.
36923 There were differences in the PHY setup between Linux and U-Boot.
36925 This patch fixes the problem. Apparently "remote fault" is being set,
36926 which signals to some devices (on the other end of the cable) that a
36927 fault has occurred, while other devices ignore it. I believe the RF bit
36928 was causing the issue, but I removed T4 also, to match up with Linux.
36930 Signed-off-by: Mike Nuss <mike@terascala.com>
36932 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
36933 Author: Timur Tabi <timur@freescale.com>
36934 Date: Mon Mar 3 09:58:52 2008 -0600
36936 fix QE firmware uploading limit
36938 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
36939 systems with more than one RISC core.
36941 Signed-off-by: Timur Tabi <timur@freescale.com>
36943 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
36944 Author: Bernhard Nemec <bnemec@ganssloser.com>
36945 Date: Mon Mar 3 11:57:23 2008 +0000
36947 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
36949 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
36950 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
36952 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
36954 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
36955 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
36956 Date: Mon Mar 3 10:39:13 2008 +0200
36958 fix copy from ram to dataflash
36960 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
36961 routines instead of dataflash. This is because it checks "if source
36962 address is not dataflash" instead of target address.
36964 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
36966 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
36967 Author: Wolfgang Denk <wd@denx.de>
36968 Date: Mon Mar 3 12:16:44 2008 +0100
36970 Fix quoting problem (preboot setting) in many board config files.
36972 Signed-off-by: Wolfgang Denk <wd@denx.de>
36974 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
36975 Author: Wolfgang Denk <wd@denx.de>
36976 Date: Mon Mar 3 12:36:49 2008 +0100
36978 ADS5121: Fix default environment.
36980 Signed-off-by: Wolfgang Denk <wd@denx.de>
36982 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
36983 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36984 Date: Sun Mar 2 16:12:31 2008 +0100
36986 Makefile: Fix missing unconfig and mkconfig use
36988 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36990 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
36991 Author: michael <trimarchi@gandalf.sssup.it>
36992 Date: Sun Mar 2 23:33:46 2008 +0100
36994 Fix checking fat32 cluster size.
36996 This fixes the cluster size tests in the FAT32 file system.
36997 The current implementation of VFAT support doesn't work if the
36998 referred cluster has an offset > 16bit representation, causing
36999 "fatload" and "fatls" commands etc. to fail.
37001 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
37003 commit 661bad63a076a96c39c64f136915f146725af92b
37004 Author: Wolfgang Denk <wd@denx.de>
37005 Date: Sun Mar 2 22:57:23 2008 +0100
37007 Prepare v1.3.2-rc2 release candidate
37009 Signed-off-by: Wolfgang Denk <wd@denx.de>
37011 commit 76957cb3d621bf664311908e5962e151c633c285
37012 Author: Stefan Roese <sr@denx.de>
37013 Date: Sat Mar 1 12:11:40 2008 +0100
37015 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
37017 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
37018 currently 4k/2k is configured. This patch fixes this issue.
37020 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
37022 Signed-off-by: Stefan Roese <sr@denx.de>
37024 commit 118978c8eb43803e2794233922df4249fa278b83
37025 Author: Woodruff, Richard <r-woodruff2@ti.com>
37026 Date: Fri Feb 29 17:34:35 2008 -0600
37028 Fix alignment error on ARM for modules
37030 Fix alignment fault on ARM when running modules. With out an explicit
37031 linker file gcc4.2.1 will half word align __bss_start's value. The word
37032 dereference will crash hello_world.
37034 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
37036 commit ce1120dd703e6f12c59e4eba9962356a0300b832
37037 Author: Dave Liu <r63238@freescale.com>
37038 Date: Fri Feb 29 17:45:31 2008 +0800
37040 fs: Fix ext2 read issue
37042 The ext2 aligned process will corrupt the key
37043 data struct, the patch fix this.
37045 Signed-off-by: Dave Liu <daveliu@freescale.com>
37047 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
37048 Author: Wolfgang Denk <wd@denx.de>
37049 Date: Sun Mar 2 22:45:33 2008 +0100
37051 Makefile: cleanup "clean" target
37053 Make sure CDPATH settings cannot interfere.
37056 Signed-off-by: Wolfgang Denk <wd@denx.de>
37058 commit ffda586fc1373243c9794babde69500f6293a8d8
37059 Author: Li Yang <leoli@freescale.com>
37060 Date: Fri Feb 29 11:46:05 2008 +0800
37062 add cscope build target
37064 Add cscope build target to generate cscope database for code browsing.
37066 Signed-off-by: Li Yang <leoli@freescale.com>
37068 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
37069 Author: Kim Phillips <kim.phillips@freescale.com>
37070 Date: Wed Feb 27 15:06:39 2008 -0600
37072 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
37074 erratum 5.6 states the autoneg completion bit is functional only if the
37075 autoneg bit is asserted.
37077 This fixes any secondarily-issued networking commands on non-gigabit
37078 links on the mpc8360 mds board.
37080 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37082 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
37083 Author: John Rigby <jrigby@freescale.com>
37084 Date: Tue Feb 26 09:38:14 2008 -0700
37086 MPC5121e ADS PCI support take 3
37088 Adds PCI support for MPC5121
37090 Tested with drivers/net/rtl8139.c
37092 Support is conditional since PCI on old silicon does not work.
37094 ads5121_PCI_config turns on PCI
37096 In this version, condition compilation of PCI code has been moved
37097 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
37098 suggested by Jean-Christophe PLAGNIOL-VILLARD
37100 Signed-off-by: John Rigby <jrigby@freescale.com>
37102 commit 44b4dbed4133f657705b7c5193209da9978243a7
37103 Author: Anatolij Gustschin <agust@denx.de>
37104 Date: Mon Feb 25 23:53:07 2008 +0100
37106 Fix warnings while compilation of post/drivers/memory.c
37108 Fix warnings while compilation with new gcc in eldk-4.2
37110 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37112 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
37113 Author: Anatolij Gustschin <agust@denx.de>
37114 Date: Mon Feb 25 20:54:04 2008 +0100
37116 ppc4xx: Fix problem in 4xx_enet.c driver
37118 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
37119 enabled. To reproduce the problem ensure that 'ethrotate'
37120 environment variable isn't set to "no" and then run
37121 "tftp 200000 not_existent_file".
37122 This patch tries to fix the issue.
37124 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37126 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
37127 Author: Anatolij Gustschin <agust@denx.de>
37128 Date: Mon Feb 25 20:04:20 2008 +0100
37130 POST: Disable cache while SPR POST
37132 Currently (since commit b2e2142c) u-boot crashes on
37133 sequoia board while SPR test if CONFIG_4xx_DCACHE is
37134 enabled. This patch disables the cache while SPR test.
37136 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37138 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
37139 Author: Martin Krause <martin.krause@tqs.de>
37140 Date: Mon Feb 25 17:52:40 2008 +0100
37142 TQM5200: use automatic fdt memory fixup (part 2)
37144 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
37145 TB5200 and TB5200_B to fixup the /memory node with the memory values
37146 detected by U-Boot.
37148 Signed-off-by: Martin Krause <martin.krause@tqs.de>
37150 commit 44ceec253ea941b301abf4b079d52324def69d92
37151 Author: Martin Krause <martin.krause@tqs.de>
37152 Date: Mon Feb 25 15:17:05 2008 +0100
37154 TQM5200: use automatic fdt memory fixup
37156 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
37157 TB5200 and TB5200_B to fixup the /memory node with the memory values
37158 detected by U-Boot.
37160 Signed-off-by: Martin Krause <martin.krause@tqs.de>
37162 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
37163 Author: Martin Krause <martin.krause@tqs.de>
37164 Date: Mon Feb 25 13:27:52 2008 +0100
37166 TQM5200: fix bug in SDRAM initialization code
37168 This patch fixes a bug in the SDRAM initialization code for the
37169 TQM5200. The hi_addr bit is now set correctly. Without this patch
37170 the hi_addr bit is always set to 1, if the second SDRAM bank is
37173 For other MPC5200 boards a correspondig patch has already been applied
37174 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
37176 Signed-off-by: Martin Krause <martin.krause@tqs.de>
37178 Forget the first patch please. I confused flash with SDRAM in
37181 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
37182 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37183 Date: Mon Feb 25 00:03:12 2008 +0100
37185 mx1fs2/flash: Fix multiple compiler warnings
37187 "pointer targets in assignment differ in signedness"
37189 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37191 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
37192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37193 Date: Mon Feb 25 00:03:11 2008 +0100
37195 arm-imx: Fix register definitions
37197 Sync register definitions with linux
37199 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37201 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
37202 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37203 Date: Mon Feb 25 00:03:10 2008 +0100
37205 actua1/actua2/actua3: Fix multiple unused variable warnings
37208 actux1.c: In function 'checkboard':
37209 actux1.c:92: warning: unused variable 'revision'
37212 actux2.c: In function 'checkboard':
37213 actux2.c:100: warning: unused variable 's'
37214 actux2.c:99: warning: unused variable 'revision'
37215 actux2.c: In function 'reset_phy':
37216 actux2.c:130: warning: unused variable 'i'
37219 actux3.c: In function 'checkboard':
37220 actux3.c:114: warning: unused variable 'revision'
37222 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37224 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
37225 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37226 Date: Sun Feb 24 11:44:29 2008 +0900
37228 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
37230 The previous patch was lacking of i386, microblaze, nios and nios2. This
37231 patch tries to fix them.
37233 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37235 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
37236 Author: Marian Balakowicz <m8@semihalf.com>
37237 Date: Fri Feb 29 22:22:46 2008 +0100
37239 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
37241 Do not use global fdt blob pointer, calculate blob size from routine
37242 argument blob pointer.
37244 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37246 commit d1cc52879c8966507dad9fb575481e6d3985e64e
37247 Author: David Gibson <david@gibson.dropbear.id.au>
37248 Date: Tue Feb 12 00:58:31 2008 +1100
37250 libfdt: Add and use a node iteration helper function.
37252 This patch adds an fdt_next_node() function which can be used to
37253 iterate through nodes of the tree while keeping track of depth. This
37254 function is used to simplify the iteration code in a lot of other
37255 functions, and is also exported for use by library users.
37257 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
37259 commit 8cf30809a82902a471866d2f07725ce3b8a22291
37260 Author: Bartlomiej Sieka <tur@semihalf.com>
37261 Date: Fri Feb 29 16:00:24 2008 +0100
37263 [new uImage] Add libfdt support to mkimage
37265 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37267 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
37268 Author: Bartlomiej Sieka <tur@semihalf.com>
37269 Date: Fri Feb 29 16:00:23 2008 +0100
37271 [new uImage] Add sha1.o object to mkimage binary build
37273 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37275 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
37276 Author: Marian Balakowicz <m8@semihalf.com>
37277 Date: Fri Feb 29 16:00:06 2008 +0100
37279 [new uImage] Fix component handling for legacy multi component images
37281 Use uint32_t when accessing size table in image_multi_count() and
37282 image_multi_getimg() for multi component images.
37284 Add missing uimage_to_cpu() endianness conversion.
37286 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37288 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
37289 Author: Marian Balakowicz <m8@semihalf.com>
37290 Date: Fri Feb 29 15:59:59 2008 +0100
37292 [new uImage] Share common uImage code between mkimage and U-boot
37294 This patch adds the following common routines:
37296 1) Dedicated mkimage print_header() is replaced with common
37297 image_print_contents()
37298 image_print_contents_noindent()
37300 2) Common os/arch/type/comp fields name <--> id translation routines
37301 genimg_get_os_name()
37302 genimg_get_arch_name()
37303 genimg_get_type_name()
37304 genimg_get_comp_name()
37306 genimg_get_arch_id()
37307 genimg_get_type_id()
37308 genimg_get_comp_id()
37310 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37312 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
37313 Author: Marian Balakowicz <m8@semihalf.com>
37314 Date: Fri Feb 29 14:58:34 2008 +0100
37316 [new uImage] Update naming convention for bootm/uImage related code
37318 This patch introduces the following prefix convention for the
37319 image format handling and bootm related code:
37321 genimg_ - dual format shared code
37322 image_ - legacy uImage format specific code
37323 fit_ - new uImage format specific code
37324 boot_ - booting process related code
37326 Related routines are renamed and a few pieces of code are moved around and
37329 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37331 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
37332 Author: Kumar Gala <galak@kernel.crashing.org>
37333 Date: Wed Feb 27 21:51:51 2008 -0600
37335 [new uImage] Respect autostart setting in linux bootm
37337 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37338 Acked-by: Marian Balakowicz <m8@semihalf.com>
37340 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
37341 Author: Kumar Gala <galak@kernel.crashing.org>
37342 Date: Wed Feb 27 21:51:50 2008 -0600
37344 [new uImage] Provide ability to restrict region used for boot images
37346 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
37347 to restrict what memory range is used for bootm.
37349 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37350 Acked-by: Marian Balakowicz <m8@semihalf.com>
37352 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
37353 Author: Kumar Gala <galak@kernel.crashing.org>
37354 Date: Wed Feb 27 21:51:49 2008 -0600
37356 [new uImage] Use lmb for bootm allocations
37358 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
37359 functions over to using lmb for allocation of the ramdisk, command line
37360 and kernel bd info.
37362 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
37365 Provided a weak function that board code can call to do additional
37366 lmb reserves if needed.
37368 Also introduce the concept of bootmap_base to specify the offset in
37369 physical memory that the bootmap is located at. This is used for
37370 allocations of the cmdline, kernel bd, and device tree as they should
37371 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
37373 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37375 commit f5614e7926863bf0225ec860d9b319741a9c4004
37376 Author: Kumar Gala <galak@kernel.crashing.org>
37377 Date: Wed Feb 27 21:51:48 2008 -0600
37379 [new uImage] Add autostart flag to bootm_headers structure
37381 The autostart env variable was dropped as part of the initial new uImage
37382 cleanup. Add it back here so the arch specific code can decide if it
37383 wants to really boot or not.
37385 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37386 Acked-by: Marian Balakowicz <m8@semihalf.com>
37388 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
37389 Author: Kumar Gala <galak@kernel.crashing.org>
37390 Date: Wed Feb 27 21:51:47 2008 -0600
37392 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
37394 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
37395 the memory spaces used by various boot images and structures. This code
37396 will allow us to simplify the code in bootm and its support functions.
37398 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37400 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
37401 Author: Kumar Gala <galak@kernel.crashing.org>
37402 Date: Tue Feb 19 22:03:47 2008 -0600
37404 [new uImage] ppc: Allow boards to specify effective amount of memory
37406 For historical reasons we limited the stack to 256M because some boards
37407 could only map that much via BATS. However newer boards are capable of
37408 mapping more memory (for example 85xx is capable of doing up to 2G).
37410 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37411 Acked-by: Marian Balakowicz <m8@semihalf.com>
37413 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
37414 Author: Kumar Gala <galak@kernel.crashing.org>
37415 Date: Wed Feb 27 21:51:46 2008 -0600
37417 [new uImage] rework error handling so common functions don't reset
37419 Changed image_get_ramdisk() to just return NULL on error and have
37420 get_ramdisk() propogate that error to the caller. It's left to the
37421 caller to call do_reset() if it wants to.
37423 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
37424 to a common location. In the future we will change get_fdt() and
37425 fdt_relocate() to return success/failure and not call do_reset() at all.
37427 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37428 Acked-by: Marian Balakowicz <m8@semihalf.com>
37430 commit d2bc095a639672def11d5d043b5688d0dbd692ec
37431 Author: Kumar Gala <galak@kernel.crashing.org>
37432 Date: Wed Feb 27 21:51:45 2008 -0600
37434 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
37436 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
37437 however it does mean we have to go in and fixup the initrd info since
37438 we don't know where it will be.
37440 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37442 commit 27953493ef025fb698d68c5dee39b36f01f4d530
37443 Author: Kumar Gala <galak@kernel.crashing.org>
37444 Date: Wed Feb 27 21:51:44 2008 -0600
37446 [new uImage] ppc: Determine if we are booting an OF style
37448 If we are bootin OF style than we can skip setting up some things
37449 that are used for the old boot method.
37451 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37452 Acked-by: Marian Balakowicz <m8@semihalf.com>
37454 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
37455 Author: Kumar Gala <galak@kernel.crashing.org>
37456 Date: Wed Feb 27 21:51:43 2008 -0600
37458 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
37460 We don't actually need the kdb param as we are just using it to get
37461 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
37462 boot via OF we might not actually fill out a kdb.
37464 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37465 Acked-by: Marian Balakowicz <m8@semihalf.com>
37467 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
37468 Author: Kumar Gala <galak@kernel.crashing.org>
37469 Date: Wed Feb 27 16:30:47 2008 -0600
37471 85xx: Don't icbi when unlocking the cache
37473 There is no reason to icbi when invalidating the temporary stack in
37474 the d-cache. Its impossible on e500 to have the i-cache contain
37475 any addresses in the temp stack and it can be problematic in generating
37476 transactions on the bus to non-valid addresses.
37478 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37480 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
37481 Author: Andy Fleming <afleming@freescale.com>
37482 Date: Wed Feb 27 15:50:50 2008 -0600
37484 Fix source for ECM error IVPR
37486 The source vector for the ECM was being set to 2,
37487 but that's what the source vector for DDR was being
37488 set to. Change it to 1.
37490 Signed-off-by: Andy Fleming <afleming@freescale.com>
37492 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
37493 Author: Andy Fleming <afleming@freescale.com>
37494 Date: Wed Feb 27 14:29:58 2008 -0600
37496 Invalidate INIT_RAM TLB mappings
37498 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
37499 mappings to be unguarded. This collided with an existing "bug"
37500 where the mappings for the INIT_RAM were being kept around.
37501 This meant that speculative loads to those addresses were
37502 succeeding in the TLB, and going out to the bus, where they
37503 were causing an exception (there's nothing at that address). The
37504 Flash code was coincidentally causing such a speculative load.
37505 Rather than go back to mapping the INIT RAM as guarded, we fix
37506 it so that the entries for the INIT_RAM are invalidated. Thus
37507 the speculative loads will fail in the TLB, and have no effect.
37509 Signed-off-by: Andy Fleming <afleming@freescale.com>
37511 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
37512 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37513 Date: Sun Feb 17 22:56:17 2008 +0100
37515 sbc8548: Fix Revision reading and unused variable 'path'
37517 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37519 commit 495d162374c472f46454453553382ad0735dc725
37520 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37521 Date: Sun Feb 17 22:56:16 2008 +0100
37523 sbc8548: Fix cfi flash bank declaration
37525 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37527 commit 4efbe9dbb129f857f27856936112c8c02f016be6
37528 Author: Marian Balakowicz <m8@semihalf.com>
37529 Date: Wed Feb 27 11:02:26 2008 +0100
37531 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
37533 Dual format image code must properly handle all three FDT passing methods:
37534 - raw FDT blob passed
37535 - FDT blob embedded in the legacy uImage
37536 - FDT blob embedded in the new uImage
37538 This patch enables proper raw FDT handling when no FIT imaeg support
37539 is compiled in. This is a bit tricky as we must dected FIT format even
37540 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
37541 blobs use tha same low level format (libfdt).
37543 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37545 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
37546 Author: Marian Balakowicz <m8@semihalf.com>
37547 Date: Wed Feb 27 11:02:26 2008 +0100
37549 [new uImage] POWERPC: Add image_get_fdt() routine
37551 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
37552 (3) or embedded in the new uImage. For the (2) case embedding image must be
37553 verified before we get FDT from it. This patch factors out legacy image
37554 specific verification routine to the separate helper routine.
37556 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37557 Acked-by: Kumar Gala <galak@kernel.crashing.org>
37559 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
37560 Author: Marian Balakowicz <m8@semihalf.com>
37561 Date: Wed Feb 27 11:02:07 2008 +0100
37563 [new uImage] Add image_get_kernel() routine
37565 Legacy image specific verification is factored out to a separate helper
37566 routine to keep get_kernel() generic and simple.
37568 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37569 Acked-by: Kumar Gala <galak@kernel.crashing.org>
37571 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
37572 Author: Marian Balakowicz <m8@semihalf.com>
37573 Date: Wed Feb 27 11:01:04 2008 +0100
37575 [new uImage] Move image verify flag to bootm_headers structure
37577 Do not pass image verification flag directly to related routines.
37578 Simplify argument passing and move it to the bootm_header structure which
37579 contains curently processed image specific data and is already being passed
37580 on the argument list.
37582 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37583 Acked-by: Kumar Gala <galak@kernel.crashing.org>
37585 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
37586 Author: Marian Balakowicz <m8@semihalf.com>
37587 Date: Wed Feb 27 11:00:47 2008 +0100
37589 [Makefile] Sort COBJS in lib_<arch> Makefiles
37591 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37593 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
37594 Author: Marian Balakowicz <m8@semihalf.com>
37595 Date: Wed Feb 27 11:00:47 2008 +0100
37597 [new uImage] Optimize gen_get_image() flow control
37599 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
37600 to do, update its control flow to better reflect that simple case.
37602 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37603 Acked-by: Kumar Gala <galak@kernel.crashing.org>
37605 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
37606 Author: Marian Balakowicz <m8@semihalf.com>
37607 Date: Mon Feb 4 08:28:17 2008 +0100
37609 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
37611 PPC specific FDT blob handling code is divided into two separate routines:
37613 get_fdt() - find and verify a FDT blob (either raw or image embedded)
37614 fdt_relocate() - move FDT blob to within BOOTMAP if needed
37616 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37617 Acked-by: Kumar Gala <galak@kernel.crashing.org>
37619 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
37620 Author: Jon Loeliger <jdl@freescale.com>
37621 Date: Mon Feb 25 13:13:37 2008 -0600
37623 86xx: Fix renamed GUR symbols in sbc8641d board.
37625 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
37626 (86xx: Fix GUR PCI config registers properly), we should have
37627 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
37628 symbols in the sbc8641d board as well. Fix this oversight.
37630 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37632 commit 64cd594e623c39f73964d18787763e4533f791f7
37633 Author: Stefan Roese <sr@denx.de>
37634 Date: Mon Feb 25 16:50:48 2008 +0100
37636 ppc4xx: Fix acadia_nand build problem
37638 Don't include testdram() on NAND-booting target acadia_nand. This saves
37639 a few bytes and makes the target build clean again.
37641 Signed-off-by: Stefan Roese <sr@denx.de>
37643 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
37644 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37645 Date: Sun Feb 24 23:03:12 2008 +0000
37647 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
37649 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37651 commit 724902c8464e610642b3a170278b99710325888e
37652 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37653 Date: Sun Feb 24 23:03:11 2008 +0000
37655 arm-imx: Fix registers definition
37657 Sync registers definition with linux
37659 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37661 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
37662 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37663 Date: Sun Feb 24 23:03:10 2008 +0000
37665 actua1/actua2/actua3: Fix multipleunused variable
37668 actux1.c: In function 'checkboard':
37669 actux1.c:92: warning: unused variable 'revision'
37672 actux2.c: In function 'checkboard':
37673 actux2.c:100: warning: unused variable 's'
37674 actux2.c:99: warning: unused variable 'revision'
37675 actux2.c: In function 'reset_phy':
37676 actux2.c:130: warning: unused variable 'i'
37679 actux3.c: In function 'checkboard':
37680 actux3.c:114: warning: unused variable 'revision'
37682 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37684 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
37685 Author: Marian Balakowicz <m8@semihalf.com>
37686 Date: Mon Feb 4 08:28:09 2008 +0100
37688 [new uImage] Add dual format uImage support framework
37690 This patch adds framework for dual format images. Format detection is added
37691 and the bootm controll flow is updated to include cases for new FIT format
37694 When the legacy (image_header based) format is detected appropriate
37695 legacy specific handling is invoked. For the new (FIT based) format uImages
37696 dual boot framework has a minial support, that will only print out a
37697 corresponding debug messages. Implementation of the FIT specific handling will
37698 be added in following patches.
37700 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37702 commit b29661fc1151077776454288051bc9a488351ce8
37703 Author: Wolfgang Denk <wd@denx.de>
37704 Date: Sun Feb 24 15:21:36 2008 +0100
37706 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
37708 Signed-off-by: Wolfgang Denk <wd@denx.de>
37710 commit 00b48a48424894daa589d166d73277830b1c6ac4
37711 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37712 Date: Sat Feb 23 12:15:56 2008 +0100
37714 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
37716 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37718 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
37719 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37720 Date: Sat Feb 23 17:24:16 2008 +0900
37722 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
37724 ----------------------------------------------------------------
37725 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
37727 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
37730 GCC can be made to warn about usage of long long types with ISO C90
37731 (-ansi), but only with -pedantic. You can write this in a way that even
37732 then it doesn't cause warnings, namely by:
37735 __extension__ typedef __signed__ long long __s64;
37736 __extension__ typedef unsigned long long __u64;
37739 The __extension__ keyword in front of this switches off any pedantic
37740 warnings for this expression.
37742 Signed-off-by: Olaf Hering <olh@suse.de>
37743 Cc: <linux-arch@vger.kernel.org>
37744 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
37745 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
37746 ----------------------------------------------------------------
37748 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37750 commit 208acd112e6517b21fc30c420396902b103563ac
37751 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37752 Date: Sat Feb 23 17:07:57 2008 +0900
37754 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
37756 This will reduce the build time.
37758 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37760 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
37761 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37762 Date: Sat Feb 23 17:05:00 2008 +0900
37764 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
37766 This will reduce the build time.
37768 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37770 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
37771 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37772 Date: Sat Feb 23 16:58:41 2008 +0900
37774 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
37776 This reduces the build time by ~10%. Here's the gth2_config example.
37779 real 0m31.441s 0m27.833s
37780 user 0m24.766s 0m23.045s
37781 sys 0m10.425s 0m7.468s
37783 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37785 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
37786 Author: Marcel Moolenaar <marcelm@juniper.net>
37787 Date: Fri Feb 22 10:48:07 2008 -0800
37789 make define2mk.sed work on FreeBSD
37791 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
37792 the define2mk.sed script was identified as the source of the link
37793 failure on FreeBSD. The problem is that sed(1) does not always support
37794 the '+' operator. It isn't on FreeBSD. The attach patch implements the
37795 equivalent, using the '*' operator instead and should work everywhere.
37797 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
37799 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
37800 Author: Detlev Zundel <dzu@denx.de>
37801 Date: Fri Feb 22 17:21:32 2008 +0100
37803 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
37805 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
37806 final traces of long-deprecated "ramdisk" kernel parm") makes these
37807 changes neccessary.
37809 Signed-off-by: Detlev Zundel <dzu@denx.de>
37811 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
37812 Author: Larry Johnson <lrj@acm.org>
37813 Date: Thu Feb 21 13:58:16 2008 -0500
37815 LM75 bug fix for negative temperatures
37817 When the LM75 temperature sensor measures a temperature below 0 C, the
37818 current driver does not perform sign extension, so the result returned is
37819 256 C too high. This patch fixes the problem.
37821 Signed-off-by: Larry Johnson <lrj@acm.org>
37823 commit 5a910c224b13e413bda41922379add6d75c32da3
37824 Author: Heiko Schocher <hs@denx.de>
37825 Date: Thu Feb 21 18:33:45 2008 +0100
37827 IDS8247: update MAINTAINER entry.
37829 Signed-off-by: Heiko Schocher <hs@denx.de>
37831 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
37832 Author: Heiko Schocher <hs@denx.de>
37833 Date: Thu Feb 21 18:31:15 2008 +0100
37835 Fix device tree for mgsuvd board.
37837 Rename the "scc" node in "ethernet" for the mgsuvd board.
37839 Signed-off-by: Heiko Schocher <hs@denx.de>
37841 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
37842 Author: Yuri Tikhonov <yur@emcraft.com>
37843 Date: Thu Feb 21 14:23:42 2008 +0100
37845 lwmon5: enable hardware watchdog
37847 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
37848 causing it to reboot the board if U-Boot does a long busy-wait with
37849 udelay(). Thus, for these boards we have to restart WD more
37852 This patch splits the busy-wait udelay() into smaller, predefined,
37853 intervals, so that the watchdog timer may be resetted with the
37854 configurable (CONFIG_WD_PERIOD) interval.
37856 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
37858 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
37859 Author: Anatolij Gustschin <agust@denx.de>
37860 Date: Thu Feb 21 12:52:29 2008 +0100
37862 ppc4xx: Support for ATI Radeon 9200 card on sequoia
37864 Adds configuration option for ATI Radeon 9200 card
37865 support to sequoia config file. If CONFIG_VIDEO
37866 is enabled, TEXT_BASE should be changed to 0xFFF80000.
37868 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37870 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
37871 Author: Kumar Gala <galak@kernel.crashing.org>
37872 Date: Mon Feb 18 08:18:07 2008 -0600
37874 Remove duplicate defines for ARRAY_SIZE
37876 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
37877 the define in common.h.
37879 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37881 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
37882 Author: Kumar Gala <galak@kernel.crashing.org>
37883 Date: Mon Feb 18 08:09:37 2008 -0600
37885 ppc: Allow boards to specify effective amount of memory
37887 For historical reasons we limited the stack to 256M because some boards
37888 could only map that much via BATS. However newer boards are capable of
37889 mapping more memory (for example 85xx is capable of doing up to 2G).
37891 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37893 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
37894 Author: Mike Frysinger <vapier@gentoo.org>
37895 Date: Mon Feb 18 05:24:13 2008 -0500
37897 include autoconf.mk before any other .mk files
37899 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
37900 those .mk files can have make if statements based on the current config.
37902 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37904 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
37905 Author: Mike Frysinger <vapier@gentoo.org>
37906 Date: Mon Feb 18 05:10:07 2008 -0500
37908 error check autoconf.mk generation
37910 If any of the steps for generating autoconf.mk fail currently, they go
37911 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
37912 This is simpler and more robust than placing '|| exit $$?' after every line.
37914 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37916 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
37917 Author: Stefano Babic <sbabic@denx.de>
37918 Date: Mon Feb 18 08:03:51 2008 +0100
37920 Fix bug in dependency checking
37922 By adding VERSION_FILE to the PHONY targets the script
37923 /tools/setlocalversion is always called and version_autogenerated.h
37924 is replaced only if the script find a modified source file.
37926 Signed-off-by: Stefano Babic <sbabic@denx.de>
37928 commit 98ba144ccc912eee90dd42699f023c497ce774c6
37929 Author: Kyungmin Park <kmpark@infradead.org>
37930 Date: Mon Feb 18 14:35:43 2008 +0900
37932 Fix GPMC CS2 memory setup at apollon
37934 It disables the current map first
37936 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
37938 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
37939 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37940 Date: Sun Feb 17 23:52:46 2008 +0100
37942 uli526x: Fix multiple differ in signedness and parentheses around comparison
37944 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37946 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
37947 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37948 Date: Sun Feb 17 16:58:04 2008 +0100
37950 MIPS: Fix CFG_NO_FLASH support
37952 - Fix flash_init call when CFG_NO_FLASH is used
37953 - Remove no more needed flash.c for qemu-mips
37955 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37957 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
37958 Author: Mike Frysinger <vapier@gentoo.org>
37959 Date: Sat Feb 16 02:40:18 2008 -0500
37961 easylogo: clean up some more and add -r (rgb) support
37963 Michael Hennerich added support for outputting an image in RGB format rather
37964 than forcing YUYV all the time. This makes obvious sense if the display you
37965 have takes RGB input rather than YUYV.
37967 Rather than hack in support for options, I've converted it to use getopt and
37968 cleaned up the argument parsing in the process.
37970 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
37971 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37973 commit f65c98129ccada3f7caf97d80395a95b84e911de
37974 Author: Mike Frysinger <vapier@gentoo.org>
37975 Date: Sat Feb 16 02:12:37 2008 -0500
37977 Makefile: add target for $(LDSCRIPT)
37979 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
37980 then change into the board directory and try and create it. This allows you
37981 to generate the linker script on the fly based upon board defines (like the
37982 Blackfin boards do).
37984 There should be no regressions due to this change as the normal case is to
37985 already have a u-boot.lds file. If that's the case, then there's nothing to
37986 generate, and so make will always exit. The fix here is that if the linker
37987 script does not exist, the implicit rules take over and attempt to guess how
37988 to generate the file.
37990 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37992 commit 5583cbf736474ef754e128a54fb78632f57b48fd
37993 Author: Marian Balakowicz <m8@semihalf.com>
37994 Date: Thu Feb 21 17:27:49 2008 +0100
37996 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
37998 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38000 commit 2242f5369822bc7780db95c47985bb408ea9157b
38001 Author: Marian Balakowicz <m8@semihalf.com>
38002 Date: Thu Feb 21 17:27:41 2008 +0100
38004 [new uImage] Rename and move print_image_hdr() routine
38006 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38008 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
38009 Author: Marian Balakowicz <m8@semihalf.com>
38010 Date: Thu Feb 21 17:20:20 2008 +0100
38012 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
38014 Introducing routines for parsing new uImage format bootm arguments:
38015 [<addr>]#<conf> - configuration specification
38016 [<addr>]:<subimg> - subimage specification
38018 New format images can contain multiple subimages of the same type. For example
38019 a single new format image file can contain three kernels, two ramdisks and a
38020 couple of FDT blobs. Subimage and configuration specifications are extensions
38021 to bootm (and other image-related commands) arguments' syntax that allow to
38022 specify which particular subimage should be operated on.
38024 Subimage specification is used to denote a particular subimage. Configurations
38025 are a bit more complex -- they are used to define a particualr booting setup,
38026 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
38029 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38031 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
38032 Author: Marian Balakowicz <m8@semihalf.com>
38033 Date: Thu Feb 21 17:20:19 2008 +0100
38035 [new uImage] Add gen_get_image() routine
38037 This routine assures that image (whether legacy or FIT) is not
38038 in a special dataflash storage.
38040 If image address is a dataflash address image is moved to system RAM.
38042 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38044 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
38045 Author: Marian Balakowicz <m8@semihalf.com>
38046 Date: Thu Feb 21 17:20:18 2008 +0100
38048 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
38050 New uImage format (Flattened Image Tree) requires libfdt
38051 functionality, print out error message if CONFIG_OF_LIBFDT
38054 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
38055 This commit turns it on by default.
38057 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38059 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
38060 Author: Michael Schwingen <michael@schwingen.org>
38061 Date: Mon Feb 18 23:16:35 2008 +0100
38063 CFI: Do not use uninitialized cmd_reset
38065 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
38068 From a short test, it looks like AMD-style flash roms treat *any* unknown
38069 command write as a reset, at least when in CFI Query mode, so issuing the
38070 Intel reset command to AMD-style flashs seems safe (from the small sample I
38071 have), plus the 3-cycle magic sequence should kick the state machine into
38072 the right state even without a reset command. Since the AMD-style flashs
38073 require the unlock sequence for real operation, I chose to try the AMD reset
38074 command first, so that Intel flashs do no see an invalid command prior to
38077 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
38078 plus Intel StrataFlash.
38080 Signed-off-by: Michael Schwingen <michael@schwingen.org>
38081 Signed-off-by: Stefan Roese <sr@denx.de>
38083 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
38084 Author: Rafal Jaworowski <raj@semihalf.com>
38085 Date: Thu Feb 21 11:56:44 2008 +0100
38087 API: Add (c) and licensing notice to the public API header.
38089 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
38091 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
38092 Author: Yuri Tikhonov <yur@emcraft.com>
38093 Date: Thu Feb 21 11:06:07 2008 +0100
38095 Fix CPU POST test failure
38097 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
38098 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
38099 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
38100 This patch just saves the CR value before running the test code, so allowing
38101 it to do anything it wants with CR.
38103 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
38104 Acked-by: Yuri Tikhonov <yur@emcraft.com>
38107 commit d5908b093955415f3d340706378b991f911af671
38108 Author: Jon Loeliger <jdl@freescale.com>
38109 Date: Wed Feb 20 15:26:51 2008 -0600
38111 8610HPCD: Document the flashbank selection switches.
38113 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38115 commit a551cee99ad1d1da20fd23ad265de47448852f56
38116 Author: Jon Loeliger <jdl@freescale.com>
38117 Date: Wed Feb 20 14:22:26 2008 -0600
38119 86xx: Fix GUR PCI config registers properly.
38121 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
38122 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
38123 botched it due to not realizing that 8610 and 8641 had different
38124 Global Utility Register defintions, one of which was like 85xx,
38125 and the other wasn't. Correct this problem by introducing two
38126 symbols, one for each 86xx SoC, but neither of which is named
38127 anything like 85xx.
38129 My bad. Lovely Wednesday with git bisect. You know.
38131 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38133 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
38134 Author: Jon Loeliger <jdl@freescale.com>
38135 Date: Wed Feb 20 12:24:11 2008 -0600
38137 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
38139 Without an actual supported video card hooked up, enabling
38140 the CONFIG_VIDEO by default just makes it look broken by
38141 routing all console output to the video card. Don't.
38143 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38145 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
38146 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
38147 Date: Wed Jan 30 15:08:15 2008 -0600
38149 ColdFire: Fix missing code flash size for M5485EVB
38151 Signed-off-by: James Mahan <kmahan@freescale.com>
38152 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
38154 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
38155 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
38156 Date: Wed Jan 30 15:04:42 2008 -0600
38158 ColdFire: Fix 5282 and 5271 interrupt mask bit
38160 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
38162 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
38163 Author: Jon Loeliger <jdl@freescale.com>
38164 Date: Tue Feb 19 12:31:08 2008 -0600
38166 8610HPCD: Fix typos in two PCI setup registers.
38168 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
38169 were erroneously present as 85xx names and values, leftover from
38170 the clone wars. Fix this by removing the 85xx cruft from the
38173 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38175 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
38176 Author: Jon Loeliger <jdl@freescale.com>
38177 Date: Mon Feb 18 14:01:56 2008 -0600
38179 86xx: Convert sbc8641d to use libfdt.
38181 This is the proper fix for a missing closing brace in the function
38182 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
38183 The ft_cpu_setup() function in mpc8641hpcn.c should have been
38184 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
38185 but was missed. Only, the sbc8641d was nominally still using it.
38186 It all got ripped out, and the funcality that was in ft_board_setup()
38187 was refactored to remove the CPU portions into the new file
38188 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
38190 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
38192 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38194 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
38195 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38196 Date: Sun Feb 17 23:35:31 2008 +0100
38198 mpc86xx: Fix unused variable 'config' and 'immap'
38200 and remove useless CONFIG_DDR_INTERLEAVE
38202 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38204 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
38205 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38206 Date: Sun Feb 17 23:03:36 2008 +0100
38208 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
38210 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38212 commit b6f29c84c208a091f95a10cbc9852d729659ba20
38213 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38214 Date: Sun Feb 17 14:15:31 2008 +0100
38216 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
38218 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38220 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
38221 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38222 Date: Sun Feb 17 14:15:32 2008 +0100
38224 pxa: fix assignment from incompatible pointer type
38226 fix mmc_bread function prototype
38228 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38230 commit 64d792063fff90b8118179b092feee09fe5cae13
38231 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38232 Date: Sun Feb 17 14:15:30 2008 +0100
38234 at91cap9adk: fix implicit declaration of function 'eth_init'
38236 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38238 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
38239 Author: Wolfgang Denk <wd@denx.de>
38240 Date: Sun Feb 17 15:43:44 2008 +0100
38242 Remove files added by mistake, update CHANGELOG.
38244 Signed-off-by: Wolfgang Denk <wd@denx.de>
38246 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
38247 Author: Mike Nuss <mike@terascala.com>
38248 Date: Wed Feb 6 11:10:11 2008 -0500
38250 PPC440EPx: Optionally enable second I2C bus
38252 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
38253 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
38254 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
38256 Signed-off-by: Mike Nuss <mike@terascala.com>
38257 Cc: Stefan Roese <sr@denx.de>
38259 commit ef5b4f221c22d05770878513951745f236b5b43f
38260 Author: Niklaus Giger <niklaus.giger@netstal.com>
38261 Date: Tue Feb 5 10:26:44 2008 +0100
38263 ppc4xx: HCU4/5. Cleanup configs
38265 - hcu4.h: Removed define of CONFIG_PPC405GPr
38266 - Corrected phy addresses
38267 - Fix boot variables
38268 - Respect line length of 80 chars
38270 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38272 commit 74973126d1be63ac75bdc192f46234dca3a7c421
38273 Author: Niklaus Giger <niklaus.giger@netstal.com>
38274 Date: Tue Feb 5 11:31:28 2008 +0100
38276 ppc4xx: HCU4/5. Cleanups
38278 - Fix some coding style violations.
38279 - Use in/out_u16/32 where appropriate.
38280 - Use register names from ppc405.h.
38281 - Fix trace useage for Lauterbach.
38282 - Remove obsolete generation HCU2.
38283 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
38285 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38287 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
38288 Author: Niklaus Giger <niklaus.giger@netstal.com>
38289 Date: Tue Feb 5 10:26:41 2008 +0100
38291 ppc4xx: PPC405GPr fix missing register definitions
38293 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38295 commit 214398d9cb22268d9d4f7563359edca0f78297a2
38296 Author: Larry Johnson <lrj@acm.org>
38297 Date: Fri Jan 18 21:49:05 2008 -0500
38299 ppc4xx: Beautify configuration files for Sequoia and Korat boards
38301 Signed-off-by: Larry Johnson <lrj@acm.org>
38303 commit 30c6a241e88499f536e86d325759e29ba00ff67f
38304 Author: Anatolij Gustschin <agust@denx.de>
38305 Date: Fri Feb 15 20:09:01 2008 +0100
38307 Wipe out assembler warnings while compiling x86 biosemu
38309 This patch tries to get rid of some assembler warnings about
38310 changed .got2 section type while compiling x86 bios emulator
38313 Signed-off-by: Anatolij Gustschin <agust@denx.de>
38315 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
38316 Author: Wolfgang Denk <wd@denx.de>
38317 Date: Fri Feb 15 00:57:09 2008 +0100
38319 Prepare v1.3.2-rc1 release candidate
38321 commit f33e9653c9c09868995d788511d573771c209fe5
38322 Author: Anatolij Gustschin <agust@denx.de>
38323 Date: Fri Feb 15 00:13:20 2008 +0100
38325 Fix compile warning on lib_ppc/board.c
38327 Signed-off-by: Anatolij Gustschin <agust@denx.de>
38329 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
38330 Author: Anatolij Gustschin <agust@denx.de>
38331 Date: Thu Feb 14 18:22:04 2008 +0100
38333 Add Radeon Mobility 9200 pci device id to the radeon driver
38335 This patch extends PCI device id table of the
38336 radeon driver so that the driver will also support
38337 Radeon Mobility 9200 (M9+) based boards.
38339 Signed-off-by: Anatolij Gustschin <agust@denx.de>
38341 commit 1b8607e1f7143548c6062c28371449ec69588c00
38342 Author: Anatolij Gustschin <agust@denx.de>
38343 Date: Thu Feb 14 18:19:50 2008 +0100
38345 Extend ATI Radeon driver to support more video modes
38347 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
38348 800x600, 640x480 at 24, 16 and 8 bpp.
38350 Signed-off-by: Anatolij Gustschin <agust@denx.de>
38352 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
38353 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38354 Date: Sun Feb 10 17:05:20 2008 +0100
38356 xsengine: fix typo and few coding style
38358 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38360 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
38361 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
38362 Date: Fri Feb 8 21:25:58 2008 +0100
38364 Fix wrong memory limit calculation in memory-test
38366 If the length of the memory address range passed to the "mtest" command is
38367 not of the form 2^x - 1, not all address lines are tested. This bug is
38368 inherited from the original software at
38369 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
38372 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
38374 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
38375 Author: Wolfgang Denk <wd@denx.de>
38376 Date: Fri Feb 15 00:11:39 2008 +0100
38378 Coding STyle cleanup.
38380 Signed-off-by: Wolfgang Denk <wd@denx.de>
38382 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
38383 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
38384 Date: Tue Feb 5 13:30:43 2008 +0900
38386 sh: Fix register address of SH7722
38388 The address of SH7722 is wrong by old document.
38389 This patch fixes this problem.
38391 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
38393 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
38394 Author: Mike Frysinger <vapier@gentoo.org>
38395 Date: Mon Feb 4 17:44:23 2008 -0500
38397 only update version header as needed
38399 Constantly rebuilding the version header will force useless relinking, so we
38400 simply need to compare the new header with the existing one before updating
38403 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38405 commit 208447f8e953f347425eb92c8e28d59e6d911363
38406 Author: Mike Frysinger <vapier@gentoo.org>
38407 Date: Mon Jan 28 05:56:19 2008 -0500
38409 Do not specify a CROSS_COMPILE default when executing size
38411 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38413 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
38414 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
38415 Date: Wed Feb 13 11:19:19 2008 +0100
38417 Fix return value of mtest when CFG_ALT_MEMTEST set
38419 Fix a missing return statement from a non-void function.
38421 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
38423 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
38424 Author: Timur Tabi <timur@freescale.com>
38425 Date: Wed Jan 9 14:35:26 2008 -0600
38427 85xx, 86xx: Determine I2C clock frequencies and store in global_data
38429 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
38431 Update the get_clocks() function in 85xx and 86xx to determine the I2C
38432 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
38434 Signed-off-by: Timur Tabi <timur@freescale.com>
38436 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
38437 Author: Wolfgang Denk <wd@denx.de>
38438 Date: Thu Feb 14 23:18:01 2008 +0100
38440 TQM834x: clean up configuration
38442 Get board name consistent with Linux and elsewhere;
38443 get rid of local network definitions etc.
38445 Signed-off-by: Wolfgang Denk <wd@denx.de>
38447 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
38448 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38449 Date: Thu Feb 14 08:02:12 2008 +0100
38451 TFTP: fix search of ':' in BootFile
38453 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38455 commit 0bc9efada170096c6b273f19165e32936d330d80
38456 Author: Wolfgang Denk <wd@denx.de>
38457 Date: Thu Feb 14 22:46:55 2008 +0100
38459 Coding style cleanup; update CHANGELOG.
38461 Signed-off-by: Wolfgang Denk <wd@denx.de>
38463 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
38464 Author: Wolfgang Denk <wd@denx.de>
38465 Date: Thu Feb 14 22:43:22 2008 +0100
38467 PPC: Use r2 instead of r29 as global data pointer
38469 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
38470 will refuse to use load/store multiple insns; instead, it issues a
38471 list of simple load/store instructions upon function entry and exit,
38472 resulting in bigger code size, which in turn makes the build for a
38477 Signed-off-by: Wolfgang Denk <wd@denx.de>
38479 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
38480 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
38481 Date: Wed Jan 30 09:08:49 2008 +0100
38483 ARM: make the machid configurable via the environment
38485 If the variable "machid" exists, let do_bootm_linux use that instead
38486 of bd->bi_arch_number.
38488 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
38490 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
38491 Author: Vlad Lungu <vlad@comsys.ro>
38492 Date: Wed Jan 23 16:34:46 2008 +0200
38494 Use #ifdef CONFIG_FSLDMAFEC
38496 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
38499 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
38501 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
38502 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
38503 Date: Sat Jan 19 10:25:59 2008 +0900
38505 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
38507 Current MII_DEBUG is confusing in two ways. One is useless define-then-
38508 undef at the top of the file. The other is there is only one debug() in
38509 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
38510 While there are many useful printf()/puts() debug codes, but they are for
38511 DEBUG, not for MII_DEBUG.
38513 This patch tries to put them all together into MII_DEBUG and debug().
38515 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
38517 commit 751b9b5189f3274b03c809172631316d6b002c82
38518 Author: Kyungmin Park <kmpark@infradead.org>
38519 Date: Thu Jan 17 16:43:25 2008 +0900
38521 OneNAND Initial Program Loader (IPL) support
38523 This patch enables the OneNAND boot within U-Boot.
38524 Before this work, we used another OneNAND IPL called X-Loader based
38525 on open source. With this work, we can build the oneboot.bin image
38526 without other program.
38528 The build sequence is simple.
38529 First, it compiles the u-boot.bin
38530 Second, it compiles OneNAND IPL
38531 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
38532 The mechanism is similar with NAND boot except it boots from itself.
38534 Another thing is that you can only use the OneNAND IPL only to work
38535 other bootloader such as RedBoot and so on.
38537 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
38539 commit 21f6f9636f0e978397548751347425fbf8d42bb3
38540 Author: Andy Fleming <afleming@freescale.com>
38541 Date: Wed Jan 16 13:06:59 2008 -0600
38543 Fix CONFIG_MMC usage in fat code
38545 A #if statement in fat.c depended on CONFIG_MMC, instead of
38546 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
38547 as "1" rather than just defined. Now it's better.
38549 Signed-off-by: Andy Fleming <afleming@freescale.com>
38551 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
38552 Author: Rafal Jaworowski <raj@semihalf.com>
38553 Date: Tue Jan 15 12:52:31 2008 +0100
38555 ppc: Refactor cache routines, so there is only one common set.
38557 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
38559 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
38560 Author: Jon Loeliger <jdl@jdl.com>
38561 Date: Wed Jan 23 15:55:02 2008 -0600
38563 86xx: Fix compilation warning in sys_eprom.c
38565 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
38567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38569 commit 65230107025733e89e28fd5e5cfd916d4953c28a
38570 Author: Haavard Skinnemoen <hskinnemoen at>
38571 Date: Fri Feb 22 11:40:50 2008 +0000
38573 Move AT91RM9200DK board support under board/atmel
38575 We already have a vendor subdir for Atmel, so we should use it.
38577 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
38579 commit 6d0943a6be99977d6d853d51749e9963d68eb192
38580 Author: Andreas Engel <andreas.engel@ericsson.com>
38581 Date: Mon Jan 14 09:06:52 2008 +0000
38583 ARM: cleanup duplicated exception handlingcode
38585 Move duplicated exception handling code into lib_arm.
38587 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
38589 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
38590 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
38591 Date: Fri Feb 1 10:09:03 2008 +0000
38593 Support for Artila M-501 starter kit
38595 Kimmo Leppala / Sysart and
38596 Timo Tuunainen / Sysart
38598 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
38599 Author: Stelian Pop <stelian@popies.net>
38600 Date: Mon Feb 11 10:50:19 2008 +0000
38604 ---------------------------------
38606 read_dataflash() takes a signed char pointer as a parameter. Silence a
38607 few warnings dues to incorrect parameter types in env_dataflash.c.
38609 Signed-off-by: Stelian Pop <stelian@popies.net>
38611 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
38612 Author: Stelian Pop <stelian@popies.net>
38613 Date: Thu Feb 7 09:42:57 2008 +0000
38615 AT91CAP9 support : move board files to Atmel vendor directory.
38617 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
38619 Signed-off-by: Stelian Pop <stelian@popies.net>
38621 commit 7263ef191b87da94768f762c7093bedeb70db98f
38622 Author: Stelian Pop <stelian at>
38623 Date: Thu Jan 3 21:15:56 2008 +0000
38625 AT91CAP9 support : MACB changes
38627 Signed-off-by: Stelian Pop <stelian <at> popies.net>
38628 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
38630 commit 6afcabf11d7321850f4feaadfee841488ace54c5
38631 Author: Stelian Pop <stelian@popies.net>
38632 Date: Thu Feb 7 16:37:54 2008 +0000
38634 AT91CAP9 support : board/ files
38636 Signed-off-by: Stelian Pop <stelian@popies.net>
38638 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
38639 Author: Stelian Pop <stelian at>
38640 Date: Wed Jan 30 21:15:54 2008 +0000
38642 AT91CAP9 support : cpu/ files
38644 Signed-off-by: Stelian Pop <stelian <at> popies.net>
38646 commit fa506a926cec348805143576c941f8e61b333cc0
38647 Author: Stelian Pop <stelian@popies.net>
38648 Date: Thu Jan 31 21:15:53 2008 +0000
38650 AT91CAP9 support : include/ files
38652 Signed-off-by: Stelian Pop <stelian@popies.net>
38654 commit 20b197c6f2799af399a68f96a1aff543a75621b8
38655 Author: Stelian Pop <stelian@popies.net>
38656 Date: Sun Jan 20 19:49:21 2008 +0000
38658 AT91CAP9 support : build integration
38660 Signed-off-by: Stelian Pop <stelian@popies.net>
38662 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
38663 Author: Stelian Pop <stelian@popies.net>
38664 Date: Sun Jan 20 21:07:00 2008 +0000
38666 Improve DataFlash CS definition.
38668 Use a structure instead of the error prone unnamed array to
38669 define the possible dataflash banks.
38671 Signed-off-by: Stelian Pop <stelian@popies.net>
38673 commit a6cdd21b56014208706238712a853a9e9a0a2290
38674 Author: Stelian Pop <stelian@popies.net>
38675 Date: Sat Jan 19 21:09:35 2008 +0000
38677 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
38679 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
38681 cpu/arm926ejs/start.o: In function `cpu_init_crit':
38682 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
38684 Signed-off-by: Stelian Pop <stelian@popies.net>
38686 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
38687 Author: Peter Pearse <peter.pearse@arm.com>
38688 Date: Fri Feb 1 16:50:24 2008 +0000
38690 Fix timer overflow in DaVinci
38691 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
38693 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
38694 Author: Peter Pearse <peter.pearse@arm.com>
38695 Date: Fri Feb 1 16:49:08 2008 +0000
38697 Update board NetStar
38698 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
38700 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
38701 Author: Niklaus Giger <niklaus.giger@netstal.com>
38702 Date: Tue Feb 5 10:26:42 2008 +0100
38704 ppc4xx: HCU4/5. Fix make O=../xx
38706 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38708 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
38709 Author: Larry Johnson <lrj@acm.org>
38710 Date: Tue Jan 22 08:51:59 2008 -0500
38712 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
38714 Signed-off-by: Larry Johnson <lrj@acm.org>
38716 commit fe891ecf4d187e9d11dde869ed4623af52b54451
38717 Author: Hiroshi Ito <ito@mlb.co.jp>
38718 Date: Thu Jan 31 18:35:04 2008 +0900
38720 NFS Timeout with large files.
38722 Retry to send NFS packet before reaching timeout.
38724 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
38726 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
38727 Author: Johannes Stezenbach <js@sig21.net>
38728 Date: Tue Jan 29 00:11:25 2008 +0100
38730 Add dependencies to avoid race conditions with parallel make.
38732 Signed-off-by: Johannes Stezenbach <js@sig21.net>
38734 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
38735 Author: Mike Frysinger <vapier@gentoo.org>
38736 Date: Mon Jan 28 05:46:01 2008 -0500
38738 Mark board_init_[fr] as noreturn
38740 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38742 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
38743 Author: Mike Frysinger <vapier@gentoo.org>
38744 Date: Mon Jan 28 05:28:50 2008 -0500
38746 Only use TEXT_BASE if defined by the board
38748 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38750 commit 1b769881750030f10743808b9d6013e11f559350
38751 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38752 Date: Fri Jan 25 07:54:47 2008 +0100
38754 Fix remaining CONFIG_COMMANDS
38759 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38761 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
38762 Author: Niklaus Giger <niklaus.giger@netstal.com>
38763 Date: Mon Jan 21 16:46:00 2008 +0100
38765 Add *~ to .gitignore
38767 One should never add a backup file ending in with ~ to the git repository.
38769 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38771 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
38772 Author: Kumar Gala <galak@kernel.crashing.org>
38773 Date: Thu Jan 17 00:02:10 2008 -0600
38775 Remove duplicate defines for ARRAY_SIZE
38777 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38779 commit c77ce474b1c57b13e9d36d9830f147966c143694
38780 Author: Stelian Pop <stelian@popies.net>
38781 Date: Mon Jan 14 22:08:14 2008 +0100
38783 Fix incorrect address test in AT91F_DataflashSelect().
38785 Signed-off-by: Stelian Pop <stelian@popies.net>
38787 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
38788 Author: Kumar Gala <galak@kernel.crashing.org>
38789 Date: Wed Feb 13 15:09:58 2008 -0600
38791 Fix building of fdt_support.c if DEBUG set
38793 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38795 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
38796 Author: Jon Loeliger <jdl@freescale.com>
38797 Date: Tue Feb 12 14:53:28 2008 -0600
38799 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
38801 These replace direct structure references for IMMR sections.
38803 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38805 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
38806 Author: Wolfgang Denk <wd@denx.de>
38807 Date: Tue Feb 12 00:45:06 2008 +0100
38809 Get rid of "#undef DEBUG" from board config files.
38811 Signed-off-by: Wolfgang Denk <wd@denx.de>
38813 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
38814 Author: Timur Tabi <timur@freescale.com>
38815 Date: Tue Jan 15 17:09:41 2008 -0600
38817 Remove #undef DEBUG from MPC83xx board header files
38819 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
38820 The inclusion of this line makes it impossible to enable debug code in
38821 other source files, because "#define DEBUG" typically needs to be defined
38822 before any header files are included.
38824 Signed-off-by: Timur Tabi <timur@freescale.com>
38826 commit 69018ce2e086e9caf35b914d675b82bc4888f077
38827 Author: Kumar Gala <galak@kernel.crashing.org>
38828 Date: Thu Jan 17 08:25:45 2008 -0600
38830 QE: Move FDT support into a common file
38832 Move the flat device tree setup for QE related devices into
38833 a common file shared between 83xx & 85xx platforms that have QE's.
38835 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38837 commit 5cf746c303710329f8040d9c62ee354313e3e91f
38838 Author: Marian Balakowicz <m8@semihalf.com>
38839 Date: Thu Jan 31 13:59:09 2008 +0100
38841 [new uImage] Move kernel data find code to get_kernel() routine
38843 Verification of the kernel image (in old format) and finding kernel
38844 data is moved to a dedicated routine. The routine will also hold
38845 support for, to be added, new image format.
38847 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38849 commit 7b325454fd231d4273de3fe373850f777fb086bf
38850 Author: Marian Balakowicz <m8@semihalf.com>
38851 Date: Thu Jan 31 13:58:20 2008 +0100
38853 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
38855 Move FDT blob finding and relocation to a dedicated
38856 get_fdt() routine. It increases code readability and
38857 will make adding support for new uImage format easier.
38859 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38861 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
38862 Author: Marian Balakowicz <m8@semihalf.com>
38863 Date: Thu Jan 31 13:58:13 2008 +0100
38865 [new uImage] Cleanup do_botm_linux() boot allocations
38867 This patch moves common pre-boot allocation steps shared between PPC
38868 and M68K to a helper routines:
38871 - get_boot_sp_limit()
38872 - get_boot_cmline()
38876 - set_clocks_in_mhz()
38878 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38880 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
38881 Author: Marian Balakowicz <m8@semihalf.com>
38882 Date: Thu Jan 31 13:57:17 2008 +0100
38884 [new uImage] Move ramdisk loading to a common routine
38886 Ramdisk loading code, including initrd_high variable handling,
38887 was duplicated for PPC and M68K platforms. This patch creates
38888 common helper routine that is being called from both platform
38889 do_bootm_linux() routines.
38891 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38893 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
38894 Author: Marian Balakowicz <m8@semihalf.com>
38895 Date: Thu Jan 31 13:55:53 2008 +0100
38897 [new uImage] Removed dead ramdisk code on microblaze architectures
38899 Microblaze do_bootm_linux() includes ramdisk processing code but
38900 the ramdisk does not get used anywhere later on.
38902 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38904 commit 5ad03eb3854c162684222a718b44c0716ea0db03
38905 Author: Marian Balakowicz <m8@semihalf.com>
38906 Date: Thu Jan 31 13:55:39 2008 +0100
38908 [new uImage] Factor out common image_get_ramdisk() routine
38910 Architecture specific do_bootm_linux() routines share common
38911 ramdisk image processing code. Move this code to a common
38914 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38916 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
38917 Author: Marian Balakowicz <m8@semihalf.com>
38918 Date: Thu Jan 31 13:20:08 2008 +0100
38920 [new uImage] Move FDT error printing to common fdt_error() routine
38922 FDT error handling in PPC do_bootm_linux() shares the same message format.
38923 This patch moves error message printing to a helper fdt_error() routine.
38925 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38926 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
38928 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
38929 Author: Marian Balakowicz <m8@semihalf.com>
38930 Date: Thu Jan 31 13:20:07 2008 +0100
38932 [new uImage] Factor out common routines for getting os/arch/type/comp names
38934 Move numeric-id to name translation for image os/arch/type/comp header
38935 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
38936 image_get_type_name(), image_get_comp_name().
38938 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38940 commit e99c26694a384221d336f6448c06a57479c0baa4
38941 Author: Marian Balakowicz <m8@semihalf.com>
38942 Date: Thu Jan 31 13:20:07 2008 +0100
38944 [new uImage] Remove standalone applications handling from boootm
38946 Standalone applications are supposed to be run using the "go" command.
38947 This patch removes standalone images handling from the do_bootm().
38949 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38951 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
38952 Author: Marian Balakowicz <m8@semihalf.com>
38953 Date: Thu Jan 31 13:20:07 2008 +0100
38955 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
38957 Support for OF_FLAT_TREE is to be obsoleted in the near future,
38958 remove related code from the bootm routines.
38960 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38962 commit 82850f3d32a2661868ec6876bed7a22c55cef718
38963 Author: Marian Balakowicz <m8@semihalf.com>
38964 Date: Thu Jan 31 13:20:06 2008 +0100
38966 [new uImage] Use image API in SH do_bootm_linux() routine
38968 Introduce image handling API for lately added Hitachi SH architecture.
38970 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38972 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
38973 Author: Marian Balakowicz <m8@semihalf.com>
38974 Date: Thu Jan 31 13:20:06 2008 +0100
38976 [new uImage] Rename architecture specific bootm code files
38978 Implementation of the do_bootm_linux() and other bootm helper routines is
38979 architecture specific code. As such it resides in lib_<arch> directories
38980 in files named <arch>_linux.c
38982 This patch renames those files to a more clear and accurate
38983 lib_<arch>/bootm.c form.
38985 List of the renamed files:
38986 lib_arm/armlinux.c -> lib_arm/bootm.c
38987 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
38988 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
38989 lib_i386/i386_linux.c -> lib_i386/bootm.c
38990 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
38991 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
38992 lib_mips/mips_linux.c -> lib_mips/bootm.c
38993 lib_nios/nios_linux.c -> lib_nios/bootm.c
38994 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
38995 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
38996 lib_sh/sh_linux.c -> lib_sh/bootm.c
38998 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39000 commit 7582438c285bf0cef82909d0f232de64ec567a8a
39001 Author: Marian Balakowicz <m8@semihalf.com>
39002 Date: Thu Jan 31 13:20:06 2008 +0100
39004 [new uImage] Return error on image move/uncompress overwrites
39006 Check for overwrites during image move/uncompress, return with error
39007 when the original image gets corrupted. Report clear message to the user
39008 and prevent further troubles when pointer to the corrupted images is passed
39009 to do_bootm_linux routine.
39011 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39013 commit f13e7b2e993c61fed1f607962501e051940d6e80
39014 Author: Marian Balakowicz <m8@semihalf.com>
39015 Date: Tue Jan 8 18:12:17 2008 +0100
39017 [new uImage] Cleanup image header pointer use in bootm code
39019 - use single image header pointer instead of a set of auxilliary variables.
39020 - add multi component image helper routines: get component size/data address
39022 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39024 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
39025 Author: Marian Balakowicz <m8@semihalf.com>
39026 Date: Tue Jan 8 18:17:10 2008 +0100
39028 [new uImage] Cleanup cmd_bootm.c
39030 - sort and cleanup headers, declarations, etc.
39031 - group related routines
39032 - cleanup indentation, white spaces
39034 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39036 commit af13cdbc01eaf88880978bfb4f603e012818ba24
39037 Author: Marian Balakowicz <m8@semihalf.com>
39038 Date: Tue Jan 8 18:11:45 2008 +0100
39040 [new uImage] Add memmove_wd() common routine
39042 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
39044 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39046 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
39047 Author: Marian Balakowicz <m8@semihalf.com>
39048 Date: Tue Jan 8 18:11:44 2008 +0100
39050 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
39052 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39054 commit 15158971f49255ccef54f0979a942cfd3de2ae52
39055 Author: Marian Balakowicz <m8@semihalf.com>
39056 Date: Tue Jan 8 18:11:44 2008 +0100
39058 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
39060 Use image header copy instead of a (possibly corrupted) pointer to
39061 a initial image location.
39063 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39065 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
39066 Author: Marian Balakowicz <m8@semihalf.com>
39067 Date: Tue Jan 8 18:11:44 2008 +0100
39069 [new uImage] Remove I386 uImage fake_header() routine
39071 I386 targets are not using a uImage format, instead fake header
39072 is added to ram image before it is further processed by bootm.
39074 Remove this fixup and force proper uImage use for I386.
39076 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39078 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
39079 Author: Marian Balakowicz <m8@semihalf.com>
39080 Date: Tue Jan 8 18:11:44 2008 +0100
39082 [new uImage] Move CHUNKSZ definition to image.h
39084 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
39085 move this definition to a common header.
39087 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39089 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
39090 Author: Marian Balakowicz <m8@semihalf.com>
39091 Date: Tue Jan 8 18:11:43 2008 +0100
39093 [new uImage] Move gunzip() common code to common/gunzip.c
39095 Move gunzip(), zalloc() and zfree() to a separate file.
39096 Share zalloc() and zfree() with cramfs uncompress routine.
39098 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39100 commit d45d5a18b6b36688f2365623f9d550566c664b5b
39101 Author: Marian Balakowicz <m8@semihalf.com>
39102 Date: Tue Jan 8 18:11:43 2008 +0100
39104 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
39106 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
39107 readable in PPC variant of do_bootm_linux() routine.
39109 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39111 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
39112 Author: Marian Balakowicz <m8@semihalf.com>
39113 Date: Tue Jan 8 18:11:43 2008 +0100
39115 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
39117 PPC implementation of do_bootm_linux() routine is moved to
39118 a dedicated file lib_ppc/ppc_linux.c
39120 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39122 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
39123 Author: Marian Balakowicz <m8@semihalf.com>
39124 Date: Tue Jan 8 18:14:09 2008 +0100
39126 [new uImage] Define a API for image handling operations
39128 - Add inline helper macros for basic header processing
39129 - Move common non inline code common/image.c
39130 - Replace direct header access with the API routines
39131 - Rename IH_CPU_* to IH_ARCH_*
39133 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39135 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
39136 Author: Marian Balakowicz <m8@semihalf.com>
39137 Date: Thu Jan 31 13:19:58 2008 +0100
39139 Add missing cmd_ximg.o to common/Makefile
39141 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
39143 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
39144 Author: Grzegorz Bernacki <gjb@semihalf.com>
39145 Date: Mon Jan 28 10:15:02 2008 +0100
39147 ADS5121e: DDR2 init/timing update.
39149 Signed-off-by: John Rigby <jrigby@freescale.com>
39150 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
39152 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
39153 Author: John Rigby <jrigby@freescale.com>
39154 Date: Wed Jan 30 13:36:57 2008 -0700
39156 Device tree updates
39158 Changes to match 5121 device tree going mainline in 2.6.25.
39160 Change OF_SOC from "soc5121" to plain "soc".
39161 Remove unneeded "ref-frequency" fixups.
39162 Remove "address" enetaddr fixup.
39164 Add bus-frequency fixup for old OF_SOC so old
39165 kernels with old device trees will work with new
39166 u-boot with 66MHz IPS clock
39168 Signed-off-by: John Rigby <jrigby@freescale.com>
39170 commit de55d18df3ff2ea614624e74793de7c43520e0e7
39171 Author: John Rigby <jrigby@freescale.com>
39172 Date: Wed Jan 30 13:36:56 2008 -0700
39174 Change IPS freq to 66MHz
39176 Recommended frequency is 66MHz
39177 Change divider from 4 to 3.
39179 Signed-off-by: John Rigby <jrigby@freescale.com>
39181 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
39182 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39183 Date: Mon Jan 14 22:38:55 2008 +0100
39185 xsengine: rename board_post_init to board_late_init
39187 missing migration from "Cleanup of some init functions"
39188 in c837dcb1a316745092567bfe4fb266d0941884ff
39190 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39192 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
39193 Author: Larry Johnson <lrj@acm.org>
39194 Date: Sat Jan 12 23:35:33 2008 -0500
39196 Add attribute POST_PREREL to ECC memory POST
39198 Signed-off-by: Larry Johnson <lrj@acm.org>
39200 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
39201 Author: Kumar Gala <galak@kernel.crashing.org>
39202 Date: Thu Jan 17 08:25:45 2008 -0600
39204 QE: Move FDT support into a common file
39206 Move the flat device tree setup for QE related devices into
39207 a common file shared between 83xx & 85xx platforms that have QE's.
39209 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39211 commit d38da537943cd36356b9d3d9d9b60533554b81d8
39212 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39213 Date: Wed Jan 23 17:20:14 2008 +0100
39215 AVR32: Make SDRAM refresh rate configurable
39217 The existing code assumes the SDRAM row refresh period should always
39218 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
39219 refresh rate should really be 7.81 us.
39221 Add a refresh_period member to struct sdram_info and initialize it
39222 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
39223 panic() until the refresh_period member is updated properly.
39225 Big thanks to Gerhard Berghofer for pointing out this issue.
39227 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39229 commit 61151cccb660cdb06a07fb283de6089913d7bde0
39230 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39231 Date: Thu Apr 19 10:10:11 2007 +0200
39233 ATSTK1000: Fix potential flash programming bug
39235 The (now obsolete) atngw100 flash programming code was having problems
39236 programming the onboard at49bv642 chip. The atstk1000 flash
39237 programming code may have the same bug, so import fix for this problem
39238 from the AVR32 Linux BSP.
39240 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39242 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
39243 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39244 Date: Thu Nov 22 17:04:13 2007 +0100
39246 ATSTK1004: Fix comment about default load address
39248 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
39249 wouldn't have worked anyway since the board can only access 4MB of
39252 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39254 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
39255 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39256 Date: Thu Nov 22 17:01:24 2007 +0100
39258 ATSTK1002: Use SDRAM + 4MB as default load address
39260 Many people run into problems when they compile a big kernel and load
39261 the uImage at the default SDRAM + 2MB address as the kernel will
39262 overwrite the uImage as it is being unpacked. Increase the default
39263 load address so that we can load a 4MB kernel image without any
39266 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39268 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
39269 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39270 Date: Thu Nov 22 16:51:39 2007 +0100
39272 ATNGW100: Fix default mtest range
39274 Let mtest cover the whole SDRAM except the last megabyte, which is
39275 where u-boot lives.
39277 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39279 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
39280 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39281 Date: Tue Jan 22 15:31:56 2008 +0900
39283 sh: Fix register address of SH7722.
39285 The address of SH7722 is wrong by old document.
39286 This patch fixes this problem.
39288 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39290 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
39291 Author: Mike Frysinger <vapier@gentoo.org>
39292 Date: Mon Feb 4 19:26:57 2008 -0500
39294 new command for displaying strings at specified memory locations
39296 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39298 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
39299 Author: Mike Frysinger <vapier@gentoo.org>
39300 Date: Mon Feb 4 19:26:57 2008 -0500
39302 rewrite/cleanup Blackfin RTC driver
39304 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39306 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
39307 Author: Mike Frysinger <vapier@gentoo.org>
39308 Date: Mon Feb 4 19:26:57 2008 -0500
39310 generate u-boot.ldr for Blackfin targets
39312 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39314 commit b779f7a59530436040f157f7841db7ab796542df
39315 Author: Mike Frysinger <vapier@gentoo.org>
39316 Date: Mon Feb 4 19:26:57 2008 -0500
39318 scrub unused symbols
39320 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39322 commit cc2977acc3bbbb7850f16645dd1081f95335868d
39323 Author: Mike Frysinger <vapier@gentoo.org>
39324 Date: Mon Feb 4 19:26:57 2008 -0500
39326 move Blackfin cpu object list to respective cpu directories
39328 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39330 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
39331 Author: Mike Frysinger <vapier@gentoo.org>
39332 Date: Mon Feb 4 19:26:57 2008 -0500
39334 interface to Blackfin on-chip One-Time-Programmable memory
39336 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39338 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
39339 Author: Mike Frysinger <vapier@gentoo.org>
39340 Date: Mon Feb 4 19:26:56 2008 -0500
39342 add support for memory commands with Blackfin L1 instruction memory
39344 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39346 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
39347 Author: Mike Frysinger <vapier@gentoo.org>
39348 Date: Mon Feb 4 19:26:56 2008 -0500
39350 use C code rather than inline assembly
39352 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39354 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
39355 Author: Mike Frysinger <vapier@gentoo.org>
39356 Date: Mon Feb 4 19:26:56 2008 -0500
39358 add Blackfin-specific reginfo command
39360 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39362 commit 0858b835e7ea501ea084d34cef75932f098342bb
39363 Author: Mike Frysinger <vapier@gentoo.org>
39364 Date: Mon Feb 4 19:26:55 2008 -0500
39366 add support for Blackfin symbol prefixes to examples
39368 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39370 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
39371 Author: Mike Frysinger <vapier@gentoo.org>
39372 Date: Mon Feb 4 19:26:55 2008 -0500
39374 add Blackfin-specific bdinfo command
39376 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39378 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
39379 Author: Mike Frysinger <vapier@gentoo.org>
39380 Date: Mon Feb 4 19:26:55 2008 -0500
39382 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
39384 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39386 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
39387 Author: Mike Frysinger <vapier@gentoo.org>
39388 Date: Mon Feb 4 19:26:55 2008 -0500
39390 unify the Blackfin board targets
39392 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39394 commit d4d7730853e5d675f76ec666807da3028c91d592
39395 Author: Mike Frysinger <vapier@gentoo.org>
39396 Date: Mon Feb 4 19:26:55 2008 -0500
39398 punt Blackfin VDSP headers and import sanitized/auto-generated ones
39400 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39402 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
39403 Author: Mike Frysinger <vapier@gentoo.org>
39404 Date: Mon Feb 4 19:26:54 2008 -0500
39406 always pull in asm/blackfin.h for Blackfin ports
39408 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39410 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
39411 Author: Mike Frysinger <vapier@gentoo.org>
39412 Date: Mon Feb 4 19:26:54 2008 -0500
39414 add missing __raw versions of Blackfin read/write io functions
39416 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39418 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
39419 Author: Mike Frysinger <vapier@gentoo.org>
39420 Date: Mon Feb 4 19:26:54 2008 -0500
39422 add the default Blackfin logo used by Blackfin boards with splash screens
39424 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39426 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
39427 Author: Mike Frysinger <vapier@gentoo.org>
39428 Date: Mon Feb 4 19:26:54 2008 -0500
39430 add some more Blackfin docs
39432 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39434 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
39435 Author: Mike Frysinger <vapier@gentoo.org>
39436 Date: Mon Feb 4 19:26:54 2008 -0500
39438 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
39440 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39442 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
39443 Author: Mike Frysinger <vapier@gentoo.org>
39444 Date: Mon Feb 4 19:26:54 2008 -0500
39446 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
39448 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39450 commit b45264ee85cbd92020640a32e02fb434fd557108
39451 Author: Mike Frysinger <vapier@gentoo.org>
39452 Date: Mon Feb 4 19:26:53 2008 -0500
39454 add gitignores for Blackfin pieces
39456 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
39458 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
39459 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39460 Date: Fri Jan 18 01:14:03 2008 +0100
39462 TFTP: add host ip addr support
39464 allow to use a different server as set in serverip
39465 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
39466 if not defined the max length will be at 128
39468 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39470 commit e56b4b494cd92def577969f9678395aa22d34c9f
39471 Author: Timur Tabi <timur@freescale.com>
39472 Date: Wed Jan 9 14:35:26 2008 -0600
39474 85xx,86xx: Determine I2C clock frequencies and store in global_data
39476 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
39478 Update the get_clocks() function in 85xx and 86xx to determine the I2C
39479 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
39481 Signed-off-by: Timur Tabi <timur@freescale.com>
39483 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
39484 Author: Wolfgang Denk <wd@denx.de>
39485 Date: Thu Dec 27 10:56:54 2007 +0100
39487 OMAP5912: fix FIFO handling in UART driver
39489 According to the OMAP5912 Serial Interfaces Reference Guide (see
39490 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
39491 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
39492 changed when the baud clock is not running, i. e. when both DLL and
39495 Thus make sure that DLL and DLH are 0 when writing the FCR.
39497 Signed-off-by: Wolfgang Denk <wd@denx.de>
39499 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
39500 Author: Harald Welte <laforge@openmoko.org>
39501 Date: Wed Dec 19 15:10:52 2007 +0100
39503 ARM: S3C24x0 SoC NAND controller support
39505 This patch adds NAND support to the S3C24x0 SoC code in u-boot
39507 Signed-off-by: Harald Welte <laforge@openmoko.org>
39509 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
39510 Author: Harald Welte <laforge@openmoko.org>
39511 Date: Wed Dec 19 14:24:40 2007 +0100
39513 ARM: s3c24xx: Multiple serial port support
39515 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
39517 Signed-off-by: Harald Welte <laforge@openmoko.org>
39519 commit a25f72f1f73a11de68251fb88c89991e202e68fa
39520 Author: Harald Welte <laforge@openmoko.org>
39521 Date: Wed Dec 19 14:16:57 2007 +0100
39523 ARM: arm920t: Allow use of 'gd' pointer from IRQ
39525 This patch allows us to use the 'gd' pointer (and thus environment
39526 and everything else associated with it) from interrupt context on
39529 Signed-off-by: Harald Welte <laforge@openmoko.org>
39531 commit be19bd5cd0f454b63298844a0b5377e029b2caad
39532 Author: Harald Welte <laforge@openmoko.org>
39533 Date: Wed Dec 19 14:19:38 2007 +0100
39535 ARM: arm920/s3c24xx: IRQ demulitplexer callback
39537 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
39538 plus a stub implementation of it for the S3C2410.
39540 The purpose is to allow arm920t implementations such as the s3c24x0 to
39541 implement interrupt handlers in u-boot without having to touch core
39544 Signed-off-by: Harald Welte <laforge@openmoko.org>
39546 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
39547 Author: Hebbar <gururajakr@sanyo.co.in>
39548 Date: Tue Dec 18 16:03:07 2007 -0800
39550 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
39552 Add ifdef to bdinfo command to display ethernet information
39553 only if CONFIG_CMD_NET is defined for arm modules.
39555 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
39557 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
39558 Author: Hebbar <gururajakr@sanyo.co.in>
39559 Date: Tue Dec 18 16:00:54 2007 -0800
39561 ARM: add I2C init function call in lib_arm/board.c
39563 Adds I2C init func call to init sequence for ARM boards. This is
39564 present in ppc,blackfin and other processor init sequence.
39566 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
39568 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
39569 Author: Stefan Roese <sr@denx.de>
39570 Date: Fri Feb 1 09:38:29 2008 +0100
39572 ppc4xx: Fix ndfc HW ECC byte order
39574 The current ndfc HW ECC implementation swaps the first two ECC bytes.
39575 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
39576 so this swapping in the HW ECC driver is bogus. This patch fixes this
39577 problem and now really uses the SMC ECC byte order.
39579 Thanks to Sean MacLennan for pointing this out.
39581 Signed-off-by: Stefan Roese <sr@denx.de>
39583 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
39584 Author: Stefan Roese <sr@denx.de>
39585 Date: Wed Jan 30 15:35:50 2008 +0100
39587 ppc4xx: Fix GPIO configuration for pcs440ep
39589 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
39590 49-63 for GPIO. They have been configured as trace signals. This patch
39591 fixes this by clearing the corresponding bit.
39593 Signed-off-by: Stefan Roese <sr@denx.de>
39595 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
39596 Author: Stefan Roese <sr@denx.de>
39597 Date: Wed Jan 30 14:48:28 2008 +0100
39599 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
39601 Signed-off-by: Stefan Roese <sr@denx.de>
39603 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
39604 Author: Ladislav Michl <ladis@linux-mips.org>
39605 Date: Fri Dec 7 00:42:32 2007 +0100
39607 ARM: Board voiceblue update
39609 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
39611 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
39612 Author: Ladislav Michl <ladis@linux-mips.org>
39613 Date: Thu Dec 6 23:24:57 2007 +0100
39615 ARM: AT91RM9200 based boards config cleanup
39617 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
39619 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
39622 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
39623 Author: Ladislav Michl <ladis@linux-mips.org>
39624 Date: Thu Dec 6 22:59:16 2007 +0100
39626 ARM: Fix at91rm9200dk base address
39628 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
39629 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
39630 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
39631 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
39632 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
39633 I'm sending this patch 4th (!) time in hope it produces at least some
39636 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
39638 Fix at91rm9200dk base and environment address.
39640 commit c95219fae2a7add7daa2f91aedca65b1698465c7
39641 Author: stefano babic <sbabic@denx.de>
39642 Date: Tue Nov 20 10:40:24 2007 +0100
39644 MMC for PXA 27X (resubmit)
39646 MMC support for X_Scale PXA is broken and does not work.
39647 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
39648 There were already some patches around the world but none of them was
39649 merged into the official u-boot tree.
39651 This patch makes order fixing this issue. Resubmit after code cleanup.
39653 Applied and tested on PXA 270 (TrizepsIV module).
39655 Signed-off-by: Stefano Babic <sbabic@denx.de>
39657 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
39658 Author: stefano babic <sbabic@denx.de>
39659 Date: Tue Nov 20 10:37:04 2007 +0100
39661 Fix gcc issues in pxa-regs.h
39663 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
39664 issues generates wrong code.
39665 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
39666 This patch fixes the problem and solves the gcc-4 issues as the linux
39669 Signed-off-by: Stefano Babic <sbabic@denx.de>
39670 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
39672 commit 7047b388876e7b905b2ec4edb8010543e3641b85
39673 Author: Jens Gehrlein <sew_s@tqs.de>
39674 Date: Tue Jan 29 08:45:03 2008 +0100
39676 TQM834x: enable DHCP
39678 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
39679 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39681 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
39682 Author: Jens Gehrlein <sew_s@tqs.de>
39683 Date: Tue Jan 29 08:45:02 2008 +0100
39685 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
39687 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
39688 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39690 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
39691 Author: Ben Warren <biggerbadderben@gmail.com>
39692 Date: Sat Jan 26 23:41:19 2008 -0500
39694 Fix conditional compilation of mpx8xxx_spi driver
39696 This driver should only compile if CONFIG_MPC8XXX_SPI is set
39698 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39699 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39701 commit 63f732d3d3880feb531f48af247c025bf01462b0
39702 Author: Rafal Jaworowski <raj@semihalf.com>
39703 Date: Tue Jan 29 17:00:34 2008 +0100
39705 API: Provide dummy halt() in the glue layer.
39707 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
39709 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
39711 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
39712 Author: Rafal Jaworowski <raj@semihalf.com>
39713 Date: Tue Jan 29 16:57:38 2008 +0100
39715 API: Convert conditional building to the new scheme.
39717 This fixes a build breakage with CONFIG_API enabled, which appeared after
39718 the recent changes in the U-Boot build system.
39720 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
39722 commit 98b742489c09780be6a832eeaa4e5eff824792bb
39723 Author: Wolfgang Denk <wd@denx.de>
39724 Date: Fri Jan 25 09:56:17 2008 +0100
39726 inka4x0: remove dead code
39728 Signed-off-by: Wolfgang Denk <wd@denx.de>
39730 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
39731 Author: Becky Bruce <becky.bruce@freescale.com>
39732 Date: Wed Jan 23 16:31:06 2008 -0600
39734 86xx: Add reginfo command
39736 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39738 commit ddcebcb638715a6278da93b553d5016f99823816
39739 Author: Becky Bruce <becky.bruce@freescale.com>
39740 Date: Wed Jan 23 16:31:05 2008 -0600
39742 86xx: Add print_laws function to fsl_law.c
39744 This can be used for debug, and will be used by board code
39745 to help implement reginfo.
39747 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39749 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
39750 Author: Becky Bruce <becky.bruce@freescale.com>
39751 Date: Wed Jan 23 16:31:04 2008 -0600
39753 86xx: Remove old-style law setup code
39755 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
39757 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39759 commit 713d8186649dae874613d495b0cecaa039a98b30
39760 Author: Becky Bruce <becky.bruce@freescale.com>
39761 Date: Wed Jan 23 16:31:03 2008 -0600
39763 86xx: Convert sbc8641d to use new law setup code.
39765 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39767 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
39768 Author: Becky Bruce <becky.bruce@freescale.com>
39769 Date: Wed Jan 23 16:31:02 2008 -0600
39771 86xx: Convert mpc8610hpcd to new law setup method.
39773 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39775 commit 4933b91f8a49e436681f163df3173beb91cac44a
39776 Author: Becky Bruce <becky.bruce@freescale.com>
39777 Date: Wed Jan 23 16:31:01 2008 -0600
39779 86xx: Support new law setup method and convert mpc8641
39781 Adds the support code in cpu/mpc86xx for the new law setup code
39782 recently created fsl_law.c, and changes the MPC8641HPCN config
39785 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39787 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
39788 Author: Becky Bruce <becky.bruce@freescale.com>
39789 Date: Wed Jan 23 16:31:00 2008 -0600
39791 86xx: Rearrange the sequence in start.S
39793 * split the BAT initialization so that only 2 BATs (for the boot page
39794 and stack) are programmed very early on. The rest are initialized later.
39795 * Move other BAT setup, ccsrbar setup, and law setup later in the code
39796 after translation has been enabled.
39798 These changes will facilitate the moving of law and BAT initialization
39799 to C code, and will aid with 36-bit physical addressing support.
39801 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
39803 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
39804 Author: Wolfgang Denk <wd@denx.de>
39805 Date: Wed Jan 23 14:41:37 2008 +0100
39807 Coding Style Cleanup; update CHANGELOG
39809 Signed-off-by: Wolfgang Denk <wd@denx.de>
39811 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
39812 Author: Wolfgang Denk <wd@denx.de>
39813 Date: Wed Jan 23 14:31:17 2008 +0100
39815 Coding Style Cleanup; update CHANGELOG
39817 Signed-off-by: Wolfgang Denk <wd@denx.de>
39819 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
39820 Author: Dave Liu <r63238@freescale.com>
39821 Date: Fri Jan 18 10:07:04 2008 +0800
39823 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
39825 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
39826 cause the 83xx immap broken, so the DMA and PCI will
39829 The patch fix the struct spi8xxx and rm struct spi83xx.
39831 Signed-off-by: Dave Liu <daveliu@freescale.com>
39832 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39834 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
39835 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39836 Date: Sat Apr 14 17:11:49 2007 +0200
39838 AVR32: ATNGW100 board support
39840 Add support for the ATNGW100 Network Gateway reference design,
39841 including flash, ethernet and MMC support.
39843 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39845 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
39846 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39847 Date: Sat Nov 24 18:15:31 2007 +0100
39849 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
39851 I don't know why the relevant layers can't do this by itself, but this
39854 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39856 commit 799891ef7b1b3432032ec23466df6b665a797fa4
39857 Author: Michael Schwingen <michael@schwingen.org>
39858 Date: Fri Jan 18 00:04:28 2008 +0100
39860 Add AcTux board support
39864 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
39866 contain changes for multiple boards, the board-specific files follow as
39869 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39871 commit 66a4344a4d910a11125df7768899ad529719855e
39872 Author: Michael Schwingen <michael@schwingen.org>
39873 Date: Wed Jan 16 19:53:23 2008 +0100
39875 add AcTux-4 board support
39877 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39879 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
39880 Author: Michael Schwingen <michael@schwingen.org>
39881 Date: Wed Jan 16 19:51:55 2008 +0100
39883 add AcTux-3 board support
39885 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39887 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
39888 Author: Michael Schwingen <michael@schwingen.org>
39889 Date: Wed Jan 16 19:51:14 2008 +0100
39891 add AcTux-2 board support
39893 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39895 commit ea99e8f05b7240fd657739e286664664ae160abe
39896 Author: Michael Schwingen <michael@schwingen.org>
39897 Date: Wed Jan 16 19:50:37 2008 +0100
39899 add AcTux-1 board support
39901 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39903 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
39904 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39905 Date: Mon Jan 14 19:20:08 2008 +0100
39907 ARM: remove useless function board_post_init
39909 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39911 commit 96bd462942022e4569b582c072a0ed26de1cd19b
39912 Author: Michael Schwingen <michael@schwingen.org>
39913 Date: Thu Jan 10 14:59:46 2008 +0100
39917 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
39918 No handshaking is done, but the active RTS signal allows to
39919 connect to the target using a PC which is using RTS/CTS
39920 handshake, and does no harm if the PC is set to ignore RTS.
39922 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39924 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
39925 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39926 Date: Mon Jan 7 08:41:34 2008 +0100
39928 IXP: add dynamic microcode addr
39930 allow to load the microde from flash or ram by download it through
39931 the serial or other.
39933 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39934 Acked-by: Stefan Roese <sr@denx.de>
39936 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
39937 Author: Michael Schwingen <michael@schwingen.org>
39938 Date: Sat Nov 10 15:44:12 2007 +0100
39940 load ixp42x NPE firmware from separate flash block, remove dead code
39944 the following patch adds support to move the IXP42X NPE firmware to a
39945 separate flash block, whose start address is defined in
39946 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
39947 NPE-enabled u-boot without copyright problems due to the NPE firmware.
39949 I hope the patch applies, I get whitespace-related differences in the NPE
39950 files due to trailing whitespace in the original versions.
39952 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39953 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39955 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
39956 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39957 Date: Tue Jan 15 14:15:46 2008 -0600
39959 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
39961 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39962 Signed-off by: John Rigby <jrigby@freescale.com>
39964 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
39965 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39966 Date: Tue Jan 15 14:02:49 2008 -0600
39968 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
39970 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39971 Signed-off by: John Rigby <jrigby@freescale.com>
39973 commit 777d1abd9796f1c2e148417cc10657e847d318ce
39974 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39975 Date: Tue Jan 15 14:00:25 2008 -0600
39977 ColdFire: Add MCF547x_8x FEC driver
39979 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39980 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39981 Signed-off by: John Rigby <jrigby@freescale.com>
39983 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
39984 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39985 Date: Tue Jan 15 13:54:09 2008 -0600
39987 ColdFire: Add MCF547x_8x dma code and header files
39989 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39990 Signed-off by: John Rigby <jrigby@freescale.com>
39992 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
39993 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39994 Date: Tue Jan 15 13:52:03 2008 -0600
39996 ColdFire: Add MCF547x_8x dma code - 2
39998 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39999 Signed-off by: John Rigby <jrigby@freescale.com>
40001 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
40002 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40003 Date: Tue Jan 15 13:48:52 2008 -0600
40005 ColdFire: Add MCF547x_8x dma code - 1
40007 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40008 Signed-off by: John Rigby <jrigby@freescale.com>
40010 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
40011 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40012 Date: Tue Jan 15 13:39:44 2008 -0600
40014 ColdFire: Add MCF547x_8x related header files
40016 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40017 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40018 Signed-off by: John Rigby <jrigby@freescale.com>
40020 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
40021 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40022 Date: Tue Jan 15 13:37:34 2008 -0600
40024 ColdFire: Add MCF547x_8x cpu arch
40026 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40027 Signed-off by: John Rigby <jrigby@freescale.com>
40029 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
40030 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40031 Date: Mon Jan 14 17:47:23 2008 -0600
40033 ColdFire: Add MCF5227x cpu and M52277EVB support-3
40035 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40036 Signed-off by: John Rigby <jrigby@freescale.com>
40038 commit c87581027994c148131b2f11aa75501f782ec19a
40039 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40040 Date: Mon Jan 14 17:46:19 2008 -0600
40042 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
40044 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40045 Signed-off by: John Rigby <jrigby@freescale.com>
40047 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
40048 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40049 Date: Mon Jan 14 17:43:33 2008 -0600
40051 ColdFire: Add MCF5227x cpu and M52277EVB support-1
40053 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40054 Signed-off by: John Rigby <jrigby@freescale.com>
40056 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
40057 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40058 Date: Mon Jan 14 17:35:44 2008 -0600
40060 ColdFire: Fix CFI Flash low level Read/Write macro
40062 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40063 Signed-off by: John Rigby <jrigby@freescale.com>
40065 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
40066 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40067 Date: Mon Jan 14 17:23:08 2008 -0600
40069 ColdFire: Add M5373EVB platform support - 2
40071 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40072 Signed-off by: John Rigby <jrigby@freescale.com>
40074 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
40075 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40076 Date: Mon Jan 14 17:19:54 2008 -0600
40078 ColdFire: Add M5373EVB platform support - 1
40080 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40081 Signed-off by: John Rigby <jrigby@freescale.com>
40083 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
40084 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40085 Date: Mon Jan 14 17:17:03 2008 -0600
40087 ColdFire: Update FlexBus CS for MCF532x
40089 Definition update and change from 16bit to 32bit
40091 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40092 Signed-off by: John Rigby <jrigby@freescale.com>
40094 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
40095 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40096 Date: Mon Jan 14 17:11:47 2008 -0600
40098 ColdFire: PCI and misc updates for MCF5445x
40100 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40101 Signed-off by: John Rigby <jrigby@freescale.com>
40103 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
40104 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40105 Date: Mon Jan 14 17:06:55 2008 -0600
40107 ColdFire: MCF5445x header files cleanup
40109 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40110 Signed-off by: John Rigby <jrigby@freescale.com>
40112 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
40113 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40114 Date: Mon Jan 14 16:59:42 2008 -0600
40116 ColdFire: MCF532x header files cleanup
40118 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40119 Signed-off by: John Rigby <jrigby@freescale.com>
40121 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
40122 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40123 Date: Mon Jan 14 15:30:15 2008 -0600
40125 ColdFire: Add modules header files
40127 Add CF specific modules header files
40129 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
40130 Signed-off-by: John Rigby <jrigby@freescale.com>
40132 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
40133 Author: Kim Phillips <kim.phillips@freescale.com>
40134 Date: Thu Jan 17 12:48:00 2008 -0600
40136 codingstyle cleanup for spi driver
40138 ..and rm unused CONFIG_FSL_SPI define
40140 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40142 commit d59feffb42c9f174116db7a82a311df98983dfce
40143 Author: Haiying Wang <Haiying.Wang@freescale.com>
40144 Date: Wed Jan 16 17:12:12 2008 -0500
40146 FSL: Fix common EEPROM_data structure definition
40148 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
40149 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
40152 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
40154 commit 6bee764bd6da510a4aad614880300c968bc7318d
40155 Author: Timur Tabi <timur@freescale.com>
40156 Date: Wed Jan 16 15:48:12 2008 -0600
40158 86xx: enable command-line editing
40160 Enable command-line editing for all MPC86xx boards.
40162 Signed-off-by: Timur Tabi <timur@freescale.com>
40164 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
40165 Author: Ben Warren <biggerbadderben@gmail.com>
40166 Date: Wed Jan 16 22:37:42 2008 -0500
40168 Implement hard SPI driver on MPC8349EMDS
40170 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
40171 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
40173 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40174 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40176 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
40177 Author: Ben Warren <biggerbadderben@gmail.com>
40178 Date: Wed Jan 16 22:37:35 2008 -0500
40180 Add support for a Freescale non-CPM SPI controller
40182 This patch adds support for the SPI controller found on Freescale PowerPC
40183 processors such as the MCP834x family. Additionally, a new config option,
40184 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
40186 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40187 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40189 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
40190 Author: Dave Liu <r63238@freescale.com>
40191 Date: Thu Jan 17 18:23:19 2008 +0800
40193 mpc83xx: Fix the fatal conflict of merge
40195 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
40196 will cause the mpc8315erdb board can't boot up.
40198 The patch fix that bug, and remove the duplicated #ifdef
40199 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
40200 MPC8313E processor.
40202 Signed-off-by: Dave Liu <daveliu@freescale.com>
40203 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40205 commit 3259eeaa4148125a81417477f62c05bd67f60587
40206 Author: Larry Johnson <lrj@acm.org>
40207 Date: Thu Jan 17 08:50:09 2008 -0500
40209 Merge Sequoia beautification into Korat code
40211 Signed-off-by: Larry Johnson <lrj@acm.org>
40213 commit e16925773211291b562e77187061e9dd1d757217
40214 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40215 Date: Thu Jan 17 07:45:05 2008 +0100
40217 net: add 'ethrotate' environment variable
40219 [PATCH] net: add 'ethrotate' environment variable
40221 This patch replaces the buildtime configuration option
40222 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
40223 configuration veriable. See README.
40225 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40226 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40228 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
40229 Author: Stefan Roese <sr@denx.de>
40230 Date: Thu Jan 17 14:29:04 2008 +0100
40232 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
40234 Signed-off-by: Stefan Roese <sr@denx.de>
40236 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
40237 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40238 Date: Thu Jan 17 18:07:32 2008 +0900
40240 sh: Remove CONFIG_COMMANDS from MS7720SE config file
40242 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40244 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
40245 Author: Niklaus Giger <niklaus.giger@netstal.com>
40246 Date: Wed Jan 16 18:39:20 2008 +0100
40248 ppc4xx: Netstal HCU4 board: added various fixes and POST
40250 - Moved some common code to netstal/common/nm_bsp.c.
40251 - sdram initialisation goes go netstal/common/fixed_sdram.c.
40252 - Added support for POST.
40253 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
40255 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40257 commit 69b0634a4ee98c9791815600d43b99f626a952f3
40258 Author: Niklaus Giger <niklaus.giger@netstal.com>
40259 Date: Thu Jan 17 12:53:56 2008 +0100
40261 ppc4xx: netstal/common define routines used by all boards
40263 Added some routines used by all Netstal boards:
40264 - nm_bsp.c: - nm_show_print and
40265 - common_misc_init_r
40266 - set_params_for_sw_install. Very specific code to handle our SW
40267 installation procedure
40268 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
40269 to handle sdram initialization.
40270 - nm.h: Common header
40272 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40274 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
40275 Author: Niklaus Giger <niklaus.giger@netstal.com>
40276 Date: Wed Jan 16 18:39:18 2008 +0100
40278 ppc4xx: Netstal HCU5 board: added various fixes and POST
40280 - Moved some common code to nestal/common/nm_bsp.c.
40281 - Added support for the vxWorks EDR.
40282 - Enable trace for Lauterbach, if present.
40283 - Added support for POST.
40284 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
40286 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40288 commit 4371090e5da77edc7bf9f296364db4801639d9c4
40289 Author: Niklaus Giger <niklaus.giger@netstal.com>
40290 Date: Wed Jan 16 18:39:08 2008 +0100
40292 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
40295 - Reduced rom_size from 384 to 320 kB
40296 - Environment is now in flash
40300 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40302 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
40303 Author: Niklaus Giger <niklaus.giger@netstal.com>
40304 Date: Wed Jan 16 18:37:50 2008 +0100
40306 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
40309 - Reduced rom_size from 384 to 320 kB
40310 - Environment is now in flash
40314 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40316 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
40317 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40318 Date: Thu Jan 17 10:53:08 2008 +0100
40320 ppc4xx: Complete DU440 board support
40322 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40324 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
40325 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40326 Date: Thu Jan 17 10:52:30 2008 +0100
40328 ppc4xx: Add DU440 board support
40330 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40332 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
40333 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40334 Date: Thu Jan 17 15:53:52 2008 +0900
40336 sh: Update SuperH SCIF driver
40338 This patch fixed wrong SH7720 CPU macro and changed macro that
40339 calculated value of SCBRR register.
40341 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40343 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
40344 Author: Grzegorz Bernacki <gjb@semihalf.com>
40345 Date: Wed Jan 16 15:12:47 2008 +0100
40347 Set ips dividor to 1/4 of csb clock.
40349 Previous setting cause ips clock to be out of spec. This bug was found by John
40350 Rigby from Freescale.
40352 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
40354 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
40355 Author: Kumar Gala <galak@kernel.crashing.org>
40356 Date: Thu Jan 17 02:19:18 2008 -0600
40358 85xx: Get ride of old TLB setup code
40360 Now that all boards have been converted, remove old config code and the
40361 config option for the new style.
40363 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40365 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
40366 Author: Kumar Gala <galak@kernel.crashing.org>
40367 Date: Thu Jan 17 02:02:10 2008 -0600
40369 85xx: Convert TQM85xx to new TLB setup
40371 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40373 commit 74121b470c14f7eaf284ee838bffca6f9521069e
40374 Author: Kumar Gala <galak@kernel.crashing.org>
40375 Date: Thu Jan 17 01:56:32 2008 -0600
40377 85xx: Convert STXGP3 & STXSSA to new TLB setup
40379 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40381 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
40382 Author: Kumar Gala <galak@kernel.crashing.org>
40383 Date: Thu Jan 17 01:44:34 2008 -0600
40385 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
40387 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40389 commit 818218bac6a11591e2542c344d2330e0f4e1968b
40390 Author: Kumar Gala <galak@kernel.crashing.org>
40391 Date: Thu Jan 17 01:31:34 2008 -0600
40393 85xx: Convert PM854/PM856 to new TLB setup
40395 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40397 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
40398 Author: Kumar Gala <galak@kernel.crashing.org>
40399 Date: Thu Jan 17 01:25:33 2008 -0600
40401 85xx: Convert MPC8540EVAL to new TLB setup
40403 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40405 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
40406 Author: Kumar Gala <galak@kernel.crashing.org>
40407 Date: Thu Jan 17 01:12:22 2008 -0600
40409 85xx: Convert MPC8568 MDS to new TLB setup
40411 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40413 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
40414 Author: Kumar Gala <galak@kernel.crashing.org>
40415 Date: Thu Jan 17 01:01:09 2008 -0600
40417 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
40419 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40421 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
40422 Author: Kumar Gala <galak@kernel.crashing.org>
40423 Date: Thu Jan 17 00:52:29 2008 -0600
40425 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
40427 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40429 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
40430 Author: Kumar Gala <galak@kernel.crashing.org>
40431 Date: Thu Jan 17 00:32:17 2008 -0600
40433 85xx: Convert ATUM8548 to new TLB setup
40435 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40437 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
40438 Author: Kumar Gala <galak@kernel.crashing.org>
40439 Date: Wed Jan 16 23:11:57 2008 -0600
40441 85xx: Convert MPC8544 DS to new TLB setup
40443 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40445 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
40446 Author: Kumar Gala <galak@kernel.crashing.org>
40447 Date: Wed Jan 16 22:38:34 2008 -0600
40449 85xx: Reworked initial processor init
40451 Reworked the initial processor initialzation sequence:
40452 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
40453 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
40454 * Reworked initial asm code to do most of the core init before TLBs
40456 The main reasons for these changes are to allow handling of 36-bit phys
40457 addresses in the future and some of the issues that will exist when we
40460 There are a few caveats on what can be initialized via the LAW and TLB
40462 * TLB entry 14/15 can't be initialized via the TLB table
40463 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
40464 the code that is currently executing.
40466 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40468 commit 44a23cfd6360a68eaa41f945190618a55519eac3
40469 Author: Kumar Gala <galak@kernel.crashing.org>
40470 Date: Wed Jan 16 22:33:22 2008 -0600
40472 85xx: Introduce new tlb API
40474 Add a set of functions to manipulate TLB entries:
40475 * set_tlb() - write a tlb entry
40476 * invalidate_tlb() - invalidate a tlb array
40477 * disable_tlb() - disable a variable size tlb entry
40478 * init_tlbs() - setup initial tlbs based on static table
40480 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40482 commit be88b1699863c262818f3af7f60173b4d48df8fc
40483 Author: Stefan Roese <sr@denx.de>
40484 Date: Thu Jan 17 07:50:17 2008 +0100
40486 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
40488 Signed-off-by: Stefan Roese <sr@denx.de>
40490 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
40491 Author: Kumar Gala <galak@kernel.crashing.org>
40492 Date: Wed Jan 16 10:04:42 2008 -0600
40494 85xx: Use proper defines for PCI addresses
40496 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
40497 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
40498 be used for configuring the PCI ATMU.
40500 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40502 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
40503 Author: Kumar Gala <galak@kernel.crashing.org>
40504 Date: Wed Jan 16 09:22:29 2008 -0600
40506 85xx: Remove old style of LAW init
40508 All boards are now using the new fsl_law code so we can drop the old version.
40510 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40512 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
40513 Author: Kumar Gala <galak@kernel.crashing.org>
40514 Date: Wed Jan 16 09:15:29 2008 -0600
40516 85xx: convert remaining 85xx boards over to use new LAW init code
40518 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
40519 to use new LAW init code.
40521 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40523 commit 572b13afc42710f2957c382a710360429c0e099b
40524 Author: Kumar Gala <galak@kernel.crashing.org>
40525 Date: Wed Jan 16 09:11:53 2008 -0600
40527 85xx: convert STXGP3/STXSSA over to use new LAW init code
40529 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40531 commit 45f2166ac0233a9263058378f39612bd11f61196
40532 Author: Kumar Gala <galak@kernel.crashing.org>
40533 Date: Wed Jan 16 09:06:48 2008 -0600
40535 85xx: convert PM854/PM856 over to use new LAW init code
40537 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40539 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
40540 Author: Kumar Gala <galak@kernel.crashing.org>
40541 Date: Wed Jan 16 09:05:27 2008 -0600
40543 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
40545 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40547 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
40548 Author: Kumar Gala <galak@kernel.crashing.org>
40549 Date: Wed Jan 16 01:45:10 2008 -0600
40551 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
40553 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40555 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
40556 Author: Kumar Gala <galak@kernel.crashing.org>
40557 Date: Wed Jan 16 01:32:06 2008 -0600
40559 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
40561 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40563 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
40564 Author: Kumar Gala <galak@kernel.crashing.org>
40565 Date: Wed Jan 16 01:16:16 2008 -0600
40567 85xx: convert MPC8544 DS over to use new LAW init code
40569 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40571 commit 83d40dfd79fe868796275802f60116d84b9e4395
40572 Author: Kumar Gala <galak@kernel.crashing.org>
40573 Date: Wed Jan 16 01:13:58 2008 -0600
40575 85xx: Move LAW init code into C
40577 Move the initialization of the LAWs into C code and provide an API
40578 to allow modification of LAWs after init.
40580 Board code is responsible to provide a law_table and num_law_entries.
40582 We should be able to use the same code on 86xx as well.
40584 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40586 commit bed8ce838a609aaab136d43b25e6df2a520bc854
40587 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40588 Date: Sat Dec 22 15:03:12 2007 +0100
40590 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
40592 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40594 commit 0764c164fed6277d359cf132d55187ea34290114
40595 Author: Vlad Lungu <vlad@comsys.ro>
40596 Date: Wed Jan 16 19:27:51 2008 +0200
40598 MIPS:Target support for qemu -M mips
40600 With serial, NE2000, IDE support. Tested in big-endian mode.
40601 Memory size hard-coded to 128M for now, so don't play with
40604 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
40606 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
40607 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40608 Date: Fri Jan 11 00:01:37 2008 +0100
40610 Fix nfs command help to reflect that the serverip is optional
40612 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40613 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40615 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
40616 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40617 Date: Mon Dec 10 22:32:14 2007 +0100
40619 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
40621 and move is_valid_ether_addr board file
40623 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40624 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40626 commit c2f896b8fc4722e36915903e1942e138e68ce804
40627 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
40628 Date: Wed Jan 16 16:13:31 2008 +0900
40630 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
40632 rx_status on the memory is basically in LE, but needs to be handled in CPU
40633 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
40636 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
40637 Cc: Masami Komiya <mkomiya@sonare.it>
40638 Cc: Lucas Jin <lucasjin@gmail.com>
40639 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40641 commit 96a236746fe6a7b84802afb4ed31536696d34812
40642 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
40643 Date: Wed Jan 16 16:12:26 2008 +0900
40645 drivers/net/rtl8139.c: Fix cache coherency issues
40647 Current driver is meant for cache coherent systems. This patch adds
40648 flush_cache() routines to support cache non-coherent systems.
40650 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
40651 Cc: Masami Komiya <mkomiya@sonare.it>
40652 Cc: Lucas Jin <lucasjin@gmail.com>
40653 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40655 commit d1276c76c1e2b5035296689280ba1acb2c425104
40656 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
40657 Date: Wed Jan 16 16:11:14 2008 +0900
40659 drivers/net/rtl8139.c: Fix tx timeout
40661 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
40662 does, the condition "(currticks() < to)" becomes invalid and immediately
40663 leads to tx timeout error. This patch introduces the fine-graded udely(10)
40664 loops to ease the impact of wrapping around.
40666 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
40667 Cc: Masami Komiya <mkomiya@sonare.it>
40668 Cc: Lucas Jin <lucasjin@gmail.com>
40669 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40671 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
40672 Author: Dave Liu <r63238@freescale.com>
40673 Date: Fri Jan 11 18:45:28 2008 +0800
40675 TSEC: Add the support for RealTek RTL8211B PHY
40677 Add the support of RealTek RTL8211B PHY, the RTL8211B
40678 PHY only supports RGMII and MII mode.
40680 Signed-off-by: Dave Liu <daveliu@freescale.com>
40681 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40683 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
40684 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
40685 Date: Wed Jan 16 09:40:41 2008 +0100
40687 Remove annoying debug printout for PHY less boards.
40689 PHY less board prints out lots of "read wrong ...":
40690 read wrong value : mii_id 3,mii_reg 2, base e0102320
40691 read wrong value : mii_id 3,mii_reg 3, base e0102320
40692 UEC: PHY is Generic MII (ffffffff)
40693 read wrong value : mii_id 3,mii_reg 4, base e0102320
40694 read wrong value : mii_id 3,mii_reg 0, base e0102320
40695 read wrong value : mii_id 3,mii_reg 1, base e0102320
40696 read wrong value : mii_id 3,mii_reg 1, base e0102320
40697 read wrong value : mii_id 3,mii_reg 5, base e0102320
40698 read wrong value : mii_id 3,mii_reg 1, base e0102320
40699 read wrong value : mii_id 3,mii_reg 1, base e0102320
40700 read wrong value : mii_id 3,mii_reg 5, base e0102320
40701 FSL UEC0: Full Duplex
40702 FSL UEC0: Speed 100BT
40703 FSL UEC0: Link is up
40704 Using FSL UEC0 device
40706 Make this printout depend on UEC_VERBOSE_DEBUG and
40707 remove its definition in uec_phy.c
40709 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
40710 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40712 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
40713 Author: Kim Phillips <kim.phillips@freescale.com>
40714 Date: Tue Jan 15 14:11:00 2008 -0600
40716 net: reduce boot latency on QE UEC based boards
40718 actually polling for PHY autonegotiation to finish enables us to remove the
40719 5 second boot prompt latency present on QE based boards.
40721 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
40722 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
40723 code shamelessly stolen from tsec driver.
40725 also rm unused CONFIG_RMII_MODE code.
40727 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40728 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
40729 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40731 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
40732 Author: michael.firth@bt.com <michael.firth@bt.com>
40733 Date: Wed Jan 16 11:40:51 2008 +0000
40735 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
40737 The current TSEC driver limits MDIO access to the devices that have been configured as attached
40738 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
40740 Signed-off-by: Michael Firth <michael.firth@bt.com>
40741 Acked-by: Andy Fleming <afleming@freescale.com>
40742 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40744 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
40745 Author: Kim Phillips <kim.phillips@freescale.com>
40746 Date: Wed Jan 16 00:38:05 2008 -0600
40748 Add support for the MPC837xERDB
40750 MPC837xERDB board support includes:
40751 * DDR2 330MHz hardcoded (soldered on the board)
40752 * Local Bus NOR Flash
40753 * I2C, UART and RTC
40754 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
40755 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
40758 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
40759 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
40760 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40762 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
40763 Author: Kim Phillips <kim.phillips@freescale.com>
40764 Date: Wed Jan 16 12:06:16 2008 -0600
40766 mpc83xx: add support for more system clock performance controls
40768 System registers that are modified are the Arbiter Configuration
40769 Register (ACR), the System Priority Control Register (SPCR), and the
40770 System Clock Configuration Register (SCCR).
40772 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
40773 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
40774 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40776 commit 16c3cde050e2d243e62b37486f1558570787beb8
40777 Author: James Yang <james.yang@freescale.com>
40778 Date: Wed Jan 16 11:58:08 2008 -0600
40780 FSL: Generalize PIXIS reset command parsing.
40782 Before, the order of arguments to the pixis_reset
40783 command needed to be supplied in a hard-coded order.
40784 Generalize the command parsing to allow any order.
40786 Signed-off-by: James Yang <james.yang@freescale.com>
40787 Acked-by: Jon Loeliger <jdl@freescale.com>
40789 commit ad8f8687b78c3e917b173f038926695383c55555
40790 Author: Jon Loeliger <jdl@freescale.com>
40791 Date: Tue Jan 15 13:42:41 2008 -0600
40793 FSL: Convert board/freescale/common/Makefile to use CONFIG_
40795 Convert the board/freescale/common/Makefile to use
40796 CONFIG_* options to select which files to conditionally
40797 compile into the board/freescale/common library rather
40798 than conditionally compiling entire files.
40805 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
40807 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40809 commit 7c2221eb230372a9e537c4f6636b147b0909325f
40810 Author: Roy Zang <tie-fei.zang@freescale.com>
40811 Date: Tue Jan 15 16:38:38 2008 +0800
40813 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
40815 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
40816 Remove unused ethernet CONFIG_ options.
40818 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
40819 Acked-by: Jon Loeliger <jdl@freescale.com>
40821 commit 711a7946277d2e29af481011e8635e9975c54e45
40822 Author: Kim Phillips <kim.phillips@freescale.com>
40823 Date: Tue Jan 15 14:05:14 2008 -0600
40825 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
40827 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
40829 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40831 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
40832 Author: Kim Phillips <kim.phillips@freescale.com>
40833 Date: Tue Jan 15 09:51:12 2008 -0600
40835 mpc83xx: clean up mpc8360emds.c warnings
40837 mpc8360emds.c: In function 'ft_board_setup':
40838 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
40839 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
40840 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
40841 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
40842 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
40843 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
40845 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40847 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
40848 Author: Kim Phillips <kim.phillips@freescale.com>
40849 Date: Mon Jan 14 16:14:46 2008 -0600
40851 mpc83xx: fix phy-connection-type fixup code
40853 use tree passed to us in local blob, not global fdt.
40855 Also use fdt_path_offset to convert to relative offset, since absolute
40856 reference is needed to check for rgmii-id mode string value.
40858 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40860 commit 2b4c952be7c4357a13e839d48df80853820c33eb
40861 Author: Kumar Gala <galak@kernel.crashing.org>
40862 Date: Mon Jan 14 09:01:40 2008 -0600
40864 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
40866 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40867 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40869 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
40870 Author: Poonam Aggrwal <b10812@freescale.com>
40871 Date: Mon Jan 14 09:41:14 2008 +0530
40873 Changes in uboot DDR configuration for MPC8313eRDB
40875 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
40876 DDR configuration in u-boot code. Some are related to performance, some
40877 affect stability and some correct few basic errors in the current
40880 The changes have been tested and found to give better memory latency
40881 figures on MPC8313eRDB.LMBench figures prove it.
40885 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
40886 (this may improve performance for application with many read
40887 or write to open pages).
40888 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
40889 001 (activating all the CS when only one is used may cause
40890 unwanted noise on the system)
40892 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
40894 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
40896 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
40897 comply with the 3 ODT clk requirements)
40898 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
40899 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
40901 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
40902 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
40904 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
40905 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
40907 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
40908 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
40910 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
40911 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
40912 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
40913 Cc: Josep P J <PJ.Joseph@freescale.com>
40914 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40916 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
40917 Author: Jerry Van Baren <gvb.uboot@gmail.com>
40918 Date: Sat Jan 12 13:24:14 2008 -0500
40920 Enable the isdram command on the MPC8360EMDS board
40922 The isdram command prints out decoded information the "serial presence
40923 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
40924 debugging memory configuration problems.
40926 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
40927 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40929 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
40930 Author: Dave Liu <r63238@freescale.com>
40931 Date: Fri Jan 11 18:48:24 2008 +0800
40933 mpc83xx: Add the support for MPC8315ERDB board
40936 - Boot from NOR Flash
40937 - DDR2 266MHz hardcoded configuration
40938 - Local bus NOR Flash R/W operation
40939 - I2C, UART, MII and RTC
40943 Signed-off-by: Dave Liu <daveliu@freescale.com>
40944 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40946 commit b05884efa614e4d8a9413158fc228e0dc02ab704
40947 Author: Dave Liu <r63238@freescale.com>
40948 Date: Fri Jan 11 18:46:50 2008 +0800
40950 mpc83xx: Add config of eTSEC emergency priority in SPCR
40952 The TSEC emergency priority definition of 831x/837x
40953 is different than the definition of 834x in SPCR register.
40955 Add the other config of TSEC emergency priority into
40958 Signed-off-by: Dave Liu <daveliu@freescale.com>
40959 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40961 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
40962 Author: Dave Liu <r63238@freescale.com>
40963 Date: Fri Jan 11 18:42:19 2008 +0800
40965 mpc83xx: Remove cache config from MPC8360ERDK.h
40967 The MPC8360ERDK board support patch is added before
40968 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
40969 so, miss clean up it.
40971 The patch clean up the miss cache config.
40973 Signed-off-by: Dave Liu <daveliu@freescale.com>
40974 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40976 commit cd9d23053d435c08fc8695017b5cb9003fcda786
40977 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
40978 Date: Mon Jan 14 23:09:32 2008 +0300
40980 nand: FSL UPM NAND driver
40982 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
40984 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
40985 Author: Kyungmin Park <kmpark@infradead.org>
40986 Date: Tue Jan 15 08:59:44 2008 +0900
40988 OneNAND: Separate U-Boot dependent code from OneNAND
40990 OneNAND: Separate U-Boot dependent code from OneNAND
40992 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
40994 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
40995 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40996 Date: Wed Jan 16 10:33:46 2008 +0100
40998 ppc4xx: Sequoia coding style cleanup and beautification
41000 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41002 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
41003 Author: Larry Johnson <lrj@acm.org>
41004 Date: Tue Jan 15 14:35:58 2008 -0500
41006 ppc4xx: Refactor ECC POST for AMCC Denali core
41008 The ECC POST reported intermittent failures running after power-up on
41009 the Korat PPC440EPx board. Even when the test passed, the debugging
41010 output occasionally reported additional unexpected ECC errors.
41012 This refactoring has three main objectives: (1) minimize the code
41013 executed with ECC enabled during the tests, (2) add more checking of the
41014 results so any unexpected ECC errors would cause the test to fail, and
41015 (3) use synchronization (only) where required by the processor.
41017 Signed-off-by: Larry Johnson <lrj@acm.org>
41019 commit 2465665b73ac2f688af945b1ed510752afa816a4
41020 Author: David Saada <David.Saada@ecitele.com>
41021 Date: Tue Jan 15 10:40:24 2008 +0200
41023 QE UEC: Extend number of supported UECs to 4
41025 This patch extends the number of supported UECs to 4. Note that the
41026 problem of QE thread resources exhaustion is resolved by setting the
41027 correct number of QE threads according to Ethernet type (GBE or FE).
41029 Signed-off-by: David Saada <david.saada@ecitele.com>
41030 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
41032 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
41033 Author: Wolfgang Denk <wd@denx.de>
41034 Date: Wed Jan 16 00:01:01 2008 +0100
41036 LWMON5: enable hush shell as command line parser
41038 Signed-off-by: Wolfgang Denk <wd@denx.de>
41040 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
41041 Author: Wolfgang Denk <wd@denx.de>
41042 Date: Tue Jan 15 17:22:28 2008 +0100
41044 ADS5121: disable watchdog; enable image timestamps
41046 Signed-off-by: Wolfgang Denk <wd@denx.de>
41048 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
41049 Author: Wolfgang Denk <wd@denx.de>
41050 Date: Tue Jan 15 17:21:28 2008 +0100
41052 TK885D: fixes for bigger flash sector sizes on new modules;
41053 adjust default environment;
41054 disable SCC ethernet (not used on this board).
41056 Signed-off-by: Wolfgang Denk <wd@denx.de>
41058 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
41059 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41060 Date: Tue Jan 15 17:48:13 2008 +0900
41062 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
41064 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41066 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
41067 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41068 Date: Tue Jan 15 23:25:25 2008 +0900
41070 sh: Add support SH7710/SH7712
41072 SH7710/SH7712 of SH3 CPU are supported.
41073 SH771X is called SH-Ether, and has the Ether controller in CPU.
41074 The driver of Ether is not included in this patch.
41076 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41078 commit 63a11be68306870e04d3851ed9fa41955cdf4894
41079 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41080 Date: Tue Jan 15 23:06:17 2008 +0900
41082 sh: Add support of map_physmem() and unmap_physmem() to SuperH
41084 This patch add the support of map_physmem() and unmap_physmem()
41085 used with Common Flash Interface(CFI) driver.
41087 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41089 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
41090 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41091 Date: Wed Jan 9 14:42:27 2008 +0900
41093 sh: Add maintainer of MS7720SE to the MAINTAINER file
41095 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41097 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
41098 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41099 Date: Wed Jan 9 14:39:58 2008 +0900
41101 sh: Fix board name in MS7720SE's config.mk
41103 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41105 commit c0a04d93734d768b39dbb72fb501b65614c8615d
41106 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41107 Date: Wed Jan 9 14:37:36 2008 +0900
41109 sh: Add MS7720SE to MAKEALL
41111 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41113 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
41114 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
41115 Date: Mon Dec 3 22:58:50 2007 +0900
41117 sh: Add support for MS7720RP02 board
41119 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
41120 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41121 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41123 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
41124 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
41125 Date: Wed Jan 9 14:30:02 2008 +0900
41127 sh: Add support for SH7720 in serial_sh driver.
41129 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
41130 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41131 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41133 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
41134 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
41135 Date: Mon Dec 3 22:58:45 2007 +0900
41137 sh: Add support SH3 and SH7720
41139 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
41140 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41141 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
41143 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
41144 Author: Stefan Roese <sr@denx.de>
41145 Date: Tue Jan 15 10:11:02 2008 +0100
41147 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
41149 Signed-off-by: Stefan Roese <sr@denx.de>
41151 commit 17bef68097ab3692500a36fb31115bff7910aa99
41152 Author: Niklaus Giger <niklausgiger@gmx.ch>
41153 Date: Mon Jan 14 14:04:42 2008 +0100
41155 ppc_4xx: Fix post spr.c for PPC405
41157 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
41158 for PPC440 and derivates processor.
41160 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
41162 commit 06c428bcd4413014b43236e77765022071424fa6
41163 Author: Dave Liu <r63238@freescale.com>
41164 Date: Mon Jan 14 11:12:01 2008 +0800
41166 QE: fix compile warning
41168 qe.c: In function 'qe_upload_firmware':
41169 qe.c:390: warning: pointer targets in passing argument 2
41170 uec.c: In function 'uec_initialize':
41171 uec.c:1236: warning: 'uec_info' may be used uninitialized
41173 Signed-off-by: Dave Liu <daveliu@freescale.com>
41175 commit a0dd99d51efa55fe023e19c97ead92683725eb11
41176 Author: Stefan Roese <sr@denx.de>
41177 Date: Mon Jan 14 10:05:05 2008 +0100
41179 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
41181 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
41182 to remove the USB PHY reset after powerup. The CPLD will keep the
41183 USB PHY in reset (active low) until the bit is set to 1 in
41184 board_early_init_f().
41186 Signed-off-by: Stefan Roese <sr@denx.de>
41188 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
41189 Author: Wolfgang Denk <wd@denx.de>
41190 Date: Sun Jan 13 23:26:45 2008 +0100
41192 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
41194 Signed-off-by: Wolfgang Denk <wd@denx.de>
41196 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
41197 Author: Wolfgang Denk <wd@denx.de>
41198 Date: Sun Jan 13 23:37:50 2008 +0100
41200 ADS5121: Fix typo in ads5121.c, adjust default environment
41202 Signed-off-by: Wolfgang Denk <wd@denx.de>
41204 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
41205 Author: John Rigby <jrigby@freescale.com>
41206 Date: Fri Aug 24 18:18:43 2007 -0600
41208 ADS5121: MAX slew rate for PATA pins
41210 Signed-off-by: John Rigby <jrigby@freescale.com>
41212 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
41213 Author: Wolfgang Denk <wd@denx.de>
41214 Date: Sun Jan 13 21:05:52 2008 +0100
41216 Fix Makefile dependency problem with parallel builds.
41218 Signed-off-by: Wolfgang Denk <wd@denx.de>
41220 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
41221 Author: Wolfgang Denk <wd@denx.de>
41222 Date: Sun Jan 13 19:51:39 2008 +0100
41224 MPC8544DS: fix board Makefile for silent build (with -s)
41226 Signed-off-by: Wolfgang Denk <wd@denx.de>
41228 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
41229 Author: Wolfgang Denk <wd@denx.de>
41230 Date: Sun Jan 13 16:44:08 2008 +0100
41232 PMC440 board: fix board Makefile for out-of-tree building
41234 Signed-off-by: Wolfgang Denk <wd@denx.de>
41236 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
41237 Author: Wolfgang Denk <wd@denx.de>
41238 Date: Sun Jan 13 16:07:44 2008 +0100
41240 Makalu: fix compile warning
41242 Signed-off-by: Wolfgang Denk <wd@denx.de>
41244 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
41245 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41246 Date: Sun Jan 13 12:36:12 2008 +0100
41248 cmd_nand : fix compiler warning.
41250 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41252 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
41253 Author: Michael Schwingen <rincewind@discworld.dascon.de>
41254 Date: Sat Jan 12 20:29:47 2008 +0100
41256 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
41258 Signed-off-by: Michael Schwingen <michael@schwingen.org>
41259 Acked-by: Stefan Roese <sr@denx.de>
41261 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
41262 Author: Wolfgang Denk <wd@denx.de>
41263 Date: Sun Jan 13 02:19:44 2008 +0100
41265 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
41267 Signed-off-by: Wolfgang Denk <wd@denx.de>
41269 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
41270 Author: Wolfgang Denk <wd@denx.de>
41271 Date: Sun Jan 13 02:19:13 2008 +0100
41273 MPC8xx FEC driver: fix compiler warning.
41275 Signed-off-by: Wolfgang Denk <wd@denx.de>
41277 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
41278 Author: Wolfgang Denk <wd@denx.de>
41279 Date: Sun Jan 13 00:59:21 2008 +0100
41281 Fix Makefile dependencies issues; allow silent build
41283 - get rid of "version" target whichdidn't really work
41284 - make autoconf.mk depend on version_autogenerated.h to make sure
41285 to rebuild files as needed
41286 - add XECHO macro to allow for silent build using "make -s"
41288 Signed-off-by: Wolfgang Denk <wd@denx.de>
41290 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
41291 Author: Wolfgang Denk <wd@denx.de>
41292 Date: Sun Jan 13 00:55:47 2008 +0100
41294 ADS5121e: fix compile warning
41296 Signed-off-by: Wolfgang Denk <wd@denx.de>
41298 commit f2b6f4610627fe3d607620e25082916a01538875
41299 Author: Wolfgang Denk <wd@denx.de>
41300 Date: Sun Jan 13 00:55:18 2008 +0100
41302 MUNICes: fix board Makefile for remote build directory
41304 Signed-off-by: Wolfgang Denk <wd@denx.de>
41306 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
41307 Author: Oliver Weber <almoeli@gmx.de>
41308 Date: Wed Jan 9 17:04:38 2008 +0100
41310 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
41312 Signed-off-by: Oliver Weber <almoeli@gmx.de>
41314 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
41315 Author: Andreas Engel <andreas.engel@ericsson.com>
41316 Date: Wed Jan 9 17:10:56 2008 +0100
41318 Make bootretry work when command line editing is enabled
41320 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
41321 This patch fixes the problem.
41323 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
41325 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
41326 Author: Larry Johnson <lrj@acm.org>
41327 Date: Fri Jan 11 23:26:18 2008 -0500
41329 Refactor code for "i2c sdram" command
41331 Signed-off-by: Larry Johnson <lrj@acm.org>
41333 commit 0df6b8446c4721b91ce311548114891130371083
41334 Author: Larry Johnson <lrj@acm.org>
41335 Date: Thu Jan 10 22:23:39 2008 -0500
41337 Fix "i2c sdram" command for DDR2 DIMMs
41339 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
41340 "i2c sdram" command. This patch provides correct alternative
41341 interpretations when DDR2 memory is detected.
41343 Signed-off-by: Larry Johnson <lrj@acm.org>
41345 commit 64134f011254123618798ff77c42ba196b2ec485
41346 Author: Wolfgang Denk <wd@denx.de>
41347 Date: Sat Jan 12 20:31:39 2008 +0100
41349 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
41351 With recent toolchain versions, some boards would not build because
41352 or errors like this one (here for ocotea board when building with
41354 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
41356 For many boards, the .bss section is big enough that it wraps around
41357 at the end of the address space (0xFFFFFFFF), so the problem will not
41358 be visible unless you use a 64 bit tool chain for development. On
41359 some boards however, changes to the code size (due to different
41360 optimizations) we bail out with section overlaps like above.
41362 The fix is to add the NOLOAD attribute to the .bss and .sbss
41363 sections, telling the linker that .bss does not consume any space in
41366 Signed-off-by: Wolfgang Denk <wd@denx.de>
41368 commit 3afac79ec27b91df185f090b31dad9620779f440
41369 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
41370 Date: Fri Jan 11 20:42:58 2008 -0600
41372 USB: Add Philips 1561 PCI-OHCI ids
41373 (needed for M5475EVB)
41375 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
41377 commit 5e8def6731cd7bec74bff42a16b139de04010353
41378 Author: Wolfgang Denk <wd@denx.de>
41379 Date: Sat Jan 12 15:51:34 2008 +0100
41381 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
41384 Signed-off-by: Heiko Schocher <hs@denx.de>
41385 Signed-off-by: Wolfgang Denk <wd@denx.de>
41387 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
41388 Author: Grzegorz Bernacki <gjb@semihalf.com>
41389 Date: Fri Jan 11 12:03:43 2008 +0100
41391 MPC512X: Cleanup bus clock names.
41393 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
41395 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
41396 Author: Grzegorz Bernacki <gjb@semihalf.com>
41397 Date: Tue Jan 8 17:16:59 2008 +0100
41399 MPC512X: Fixed typo in macro name.
41401 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
41403 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
41404 Author: Grzegorz Bernacki <gjb@semihalf.com>
41405 Date: Tue Jan 8 17:16:15 2008 +0100
41407 ads5121: Added support for FDT.
41409 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
41411 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
41412 Author: Wolfgang Denk <wd@denx.de>
41413 Date: Sat Jan 12 01:05:50 2008 +0100
41415 Coding Style cleanup; update CHANGELOG.
41417 Signed-off-by: Wolfgang Denk <wd@denx.de>
41419 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
41420 Author: Heiko Schocher <hs@denx.de>
41421 Date: Fri Jan 11 15:15:17 2008 +0100
41423 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
41425 Signed-off-by: Timur Tabi <timur@freescale.com>
41426 Signed-off-by: Heiko Schocher <hs@denx.de>
41428 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
41429 Author: Heiko Schocher <hs@denx.de>
41430 Date: Fri Jan 11 15:15:16 2008 +0100
41432 MUNICes: Set the right CFG_DEFAULT_MBAR value.
41434 Signed-off-by: Heiko Schocher <hs@denx.de>
41436 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
41437 Author: Heiko Schocher <hs@denx.de>
41438 Date: Fri Jan 11 15:15:15 2008 +0100
41440 added the config File for the MUNICes board.
41442 Signed-off-by: Heiko Schocher <hs@denx.de>
41444 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
41445 Author: Heiko Schocher <hs@denx.de>
41446 Date: Fri Jan 11 15:15:14 2008 +0100
41448 added basic support for the MUNICes board.
41450 Signed-off-by: Heiko Schocher <hs@denx.de>
41452 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
41453 Author: Wolfgang Denk <wd@denx.de>
41454 Date: Sat Jan 12 00:39:37 2008 +0100
41456 Update CHANGELOG and MAINTAINERS files.
41458 Signed-off-by: Wolfgang Denk <wd@denx.de>
41460 commit 5ba7390c3cb579172be66888a371707b47b5be4e
41461 Author: Anatolij Gustschin <agust@denx.de>
41462 Date: Fri Jan 11 02:15:02 2008 +0100
41464 Fix compilation problem in common/cmd_bmp.c
41466 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
41467 isn't defined. This patch fix this.
41469 Signed-off-by: Anatolij Gustschin <agust@denx.de>
41471 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
41472 Author: Heiko Schocher <hs@denx.de>
41473 Date: Fri Jan 11 01:12:09 2008 +0100
41475 Fix defaultconfig for the mgcoge board.
41477 Signed-off-by: Heiko Schocher <hs@denx.de>
41479 commit ac9db066b26935f31bff15c98168b19faeb603f3
41480 Author: Heiko Schocher <hs@denx.de>
41481 Date: Fri Jan 11 01:12:08 2008 +0100
41483 Added support for the mgcoge board from keymile.
41485 Signed-off-by: Heiko Schocher <hs@denx.de>
41487 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
41488 Author: Heiko Schocher <hs@denx.de>
41489 Date: Fri Jan 11 01:12:07 2008 +0100
41491 Enable SMC microcode relocation patch for SMC1.
41493 Signed-off-by: Heiko Schocher <hs@denx.de>
41495 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
41496 Author: Heiko Schocher <hs@denx.de>
41497 Date: Fri Jan 11 01:12:06 2008 +0100
41499 Added support for the mgsuvd board from keymile.
41501 Signed-off-by: Heiko Schocher <hs@denx.de>
41503 commit bf05293973b348f6946c9df92cd3c65ece42d0be
41504 Author: James Yang <james.yang@freescale.com>
41505 Date: Thu Jan 10 16:02:07 2008 -0600
41507 Fix 64-bit vsprintf.
41509 There were some size and unsigned problems.
41510 Also add support for "ll" size modifier in format string like glibc
41512 Signed-off-by: James Yang <James.Yang@freescale.com>
41513 Acked-by: Jon Loeliger <jdl@freescale.com>
41515 commit 92fa37eac530860643afa26ae347af3d23d67309
41516 Author: Larry Johnson <lrj@acm.org>
41517 Date: Wed Jan 9 12:42:35 2008 -0500
41519 Remove superfluous preprocessor conditionals from LM73 driver
41521 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
41523 (2) Use conditional Makefile.o.
41525 Signed-off-by: Larry Johnson <lrj@acm.org>
41527 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
41528 Author: Guennadi Liakhovetski <lg@denx.de>
41529 Date: Thu Jan 10 17:59:07 2008 +0100
41531 Add support for the TK885D baseboard from TELE-DATA
41533 The TK885D board uses a TQM885D module from TQ, this port adds an
41534 own configuration file and adds a last_stage_init() method to
41535 configure the two PHYs, depending on the phy_auto_nego environment
41538 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
41540 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
41541 Author: Kumar Gala <galak@kernel.crashing.org>
41542 Date: Thu Jan 10 02:22:05 2008 -0600
41544 Fix compiler warning
41546 main.c: In function 'readline_into_buffer':
41547 main.c:927: warning: unused variable 'p_buf'
41549 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41551 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
41552 Author: Anatolij Gustschin <agust@denx.de>
41553 Date: Fri Jan 11 14:30:01 2008 +0100
41555 Add Fujitsu CoralP/Lime video driver
41557 Signed-off-by: Anatolij Gustschin <agust@denx.de>
41558 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
41560 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
41561 Author: Anatolij Gustschin <agust@denx.de>
41562 Date: Fri Jan 11 02:39:47 2008 +0100
41564 Fix video console newline and carriage return handling
41566 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
41567 are not displayed correctly. This is an attempt to fix
41568 this issue. Also add carriage return handling.
41570 Signed-off-by: Anatolij Gustschin <agust@denx.de>
41571 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
41573 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
41574 Author: Stefan Roese <sr@denx.de>
41575 Date: Fri Jan 11 15:53:58 2008 +0100
41577 ppc4xx: Fix sdram init on Sequoia boards
41579 Clear possible errors in MCSR resulting from data-eye-search.
41580 If not done, then we could get an interrupt later on when
41581 exceptions are enabled.
41583 Signed-off-by: Stefan Roese <sr@denx.de>
41585 commit d610a60730b7464f6f659db49d264d89a7c71061
41586 Author: Anatolij Gustschin <agust@denx.de>
41587 Date: Fri Jan 11 15:31:09 2008 +0100
41589 ppc4xx: Rework Lime support for lwmon5
41591 Rework Lime support for lwmon5 using new video driver
41593 Signed-off-by: Anatolij Gustschin <agust@denx.de>
41595 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
41596 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41597 Date: Fri Jan 11 14:55:16 2008 +0100
41599 ppc4xx: Update PMC440 config file
41601 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41603 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
41604 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41605 Date: Fri Jan 11 14:55:08 2008 +0100
41607 ppx4xx: Fix sdram init on PMC440 boards
41609 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41611 commit 061aad4d320dddce26247699dcf2875ee2ea1366
41612 Author: Dave Liu <r63238@freescale.com>
41613 Date: Thu Jan 10 23:09:33 2008 +0800
41615 mpc83xx: Fix the bug of 266MHz data rate DDR
41617 The DDR doesn't work on the 266MHz data rate,
41618 the patch fix the bug.
41620 Signed-off-by: Dave Liu <daveliu@freescale.com>
41621 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41623 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
41624 Author: Dave Liu <r63238@freescale.com>
41625 Date: Thu Jan 10 23:08:26 2008 +0800
41627 mpc83xx: Make the code more readable
41629 Format the code, make it more readable
41631 Signed-off-by: Dave Liu <daveliu@freescale.com>
41632 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41634 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
41635 Author: Dave Liu <r63238@freescale.com>
41636 Date: Thu Jan 10 23:07:23 2008 +0800
41638 mpc83xx: Reduce the latency of DDR
41640 Reduce the AL from 2 to 1 clock to improve the performance.
41642 Signed-off-by: Dave Liu <daveliu@freescale.com>
41643 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41645 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
41646 Author: Dave Liu <r63238@freescale.com>
41647 Date: Thu Jan 10 23:06:05 2008 +0800
41649 mpc83xx: Fix the wrong definition of MPC8315E
41651 According to the latest user manual of MPC8315E,
41652 1) The SVCOD of HRCWL is different than 837x
41653 2) The SCCR has changes
41655 Signed-off-by: Dave Liu <daveliu@freescale.com>
41656 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41658 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
41659 Author: Dave Liu <r63238@freescale.com>
41660 Date: Thu Jan 10 23:05:00 2008 +0800
41662 mpc83xx: Fix the typo in mpc83xx.h
41664 The SPCR about TSEC priority is wrong.
41666 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
41667 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
41668 Signed-off-by: Dave Liu <daveliu@freescale.com>
41669 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41671 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
41672 Author: Dave Liu <r63238@freescale.com>
41673 Date: Thu Jan 10 23:04:13 2008 +0800
41675 mpc83xx: Fix the typo in global data struct
41677 Fix the typo in global_data.h
41679 Signed-off-by: Dave Liu <daveliu@freescale.com>
41680 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41682 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
41683 Author: Dave Liu <r63238@freescale.com>
41684 Date: Thu Jan 10 23:03:03 2008 +0800
41686 mpc83xx: Remove cache config from config.h
41688 clean up the cache config from configs.h of board
41690 Signed-off-by: Dave Liu <daveliu@freescale.com>
41691 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41693 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
41694 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
41695 Date: Wed Jan 9 20:57:47 2008 +0300
41697 mpc83xx: add support for the MPC8360E-RDK
41699 This is MPC8360E based board with:
41700 - 256MB fixed SDRAM;
41701 - 8MB Intel Strata NOR flash;
41702 - StMICRO 64MiB NAND flash;
41703 - two 10/100/1000 ethernet ports connected via Broadcom
41705 - two 10/100 ethernet ports connected via National
41707 - one PCI and one miniPCI slots;
41708 - four serial ports (two NS16550-compatible, two UCCs);
41709 - four USB ports working through MPC8360E "FHCI" USB controller;
41710 - Fujitsu MB86277 graphics controller;
41711 - Analog to Digital Converter/Touchscreen controller, AD7843
41714 Features not supported in this patch are:
41715 - StMICRO 64MiB NAND flash (patch sent);
41716 - MINT framebuffer initialization (patch is pending);
41717 - Fetching production information from the EEPROM via I2C;
41719 - Two slow UCCs used as RS-485 UARTs.
41721 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
41722 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41724 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
41725 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
41726 Date: Wed Jan 9 20:57:40 2008 +0300
41728 mpc83xx: add "fsl, qe" compatible fixups
41730 New device trees will use "fsl,qe" compatible properties.
41732 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
41733 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41735 commit 977b57583a7c34010e566a09a679ec3c1836f996
41736 Author: Kim Phillips <kim.phillips@freescale.com>
41737 Date: Wed Jan 9 15:24:06 2008 -0600
41739 mpc83xx: add missing CONFIG_HAS_ETH0 defines
41741 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
41742 is defined; add the define to the missing board configs.
41744 Thanks to Emilian Medve for finding this.
41746 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41748 commit b830b7f1635984ba607219fcbd78597c28eeb529
41749 Author: Becky Bruce <bgill@freescale.com>
41750 Date: Thu Jan 10 14:00:28 2008 -0600
41752 86xx: Support 2GB DIMMs
41754 Configure the number of bits used to address the banks inside the SDRAM
41755 device. The default register value of 0 means 2 bits to address 4 banks.
41756 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
41758 Signed-off-by: Becky Bruce <bgill@freescale.com>
41760 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
41761 Author: Niklaus Giger <niklausgiger@gmx.ch>
41762 Date: Thu Jan 10 18:50:33 2008 +0100
41764 ppc4xx: Make Sequoia boot vxWorks
41767 TLB 0 a entry for the Machine Check interrupt
41768 TLB 1 a entry for the RAM
41769 TLB 2 a entry for the EBC
41770 TLB 3 a entry for the boot flash
41772 After changing the baudrate to 9600 I had no problems to boot the
41773 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
41776 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
41778 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
41779 Author: Larry Johnson <lrj@arlinx.com>
41780 Date: Wed Jan 9 23:10:27 2008 -0500
41782 ppc4xx: Fix dflush() to restore DVLIM register
41784 Signed-off-by: Larry Johnson <lrj@acm.org>
41786 commit 252f60b068d1f94190b5bcfda169db582387e15e
41787 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41788 Date: Thu Jan 10 03:52:44 2008 -0500
41790 Nios2: remove common/cmd_bdinfo.c unused variable.
41792 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41793 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
41795 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
41796 Author: Ben Warren <biggerbadderben@gmail.com>
41797 Date: Wed Jan 9 18:15:53 2008 -0500
41799 Fix Ethernet init() return codes
41801 Change return values of init() functions in all Ethernet drivers to conform
41807 All drivers going forward should return 0 on success. Current drivers that
41808 return 1 on success were left as-is to minimize changes.
41810 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
41811 Acked-by: Stefan Roese <sr@denx.de>
41812 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41813 Acked-by: Kim Phillips <kim.phillips@freescale.com>
41814 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
41815 Acked-By: Timur Tabi <timur@freescale.com>
41817 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
41818 Author: Wolfgang Denk <wd@denx.de>
41819 Date: Thu Jan 10 00:55:14 2008 +0100
41821 Coding Style cleanup; update CHANGELOG
41823 Signed-off-by: Wolfgang Denk <wd@denx.de>
41825 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
41826 Author: Kim Phillips <kim.phillips@freescale.com>
41827 Date: Wed Jan 9 16:56:54 2008 -0600
41829 Add QE brg freq and correct qe bus freq fdt update code
41831 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41832 Signed-off-by: Andy Fleming <afleming@freescale.com>
41834 commit 890dfef06c2d169a3356359596890754dfb8ee1c
41835 Author: Andy Fleming <afleming@freescale.com>
41836 Date: Wed Jan 9 16:34:51 2008 -0600
41838 Remove cache config from ATUM8548 and sbc8548 configs
41840 These boards weren't updated by Kumar's config patch because they
41841 weren't in the tree, yet.
41843 Signed-off-by: Andy Fleming <afleming@freescale.com>
41845 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
41846 Author: Timur Tabi <timur@freescale.com>
41847 Date: Mon Jan 7 13:31:19 2008 -0600
41849 85xx: add ability to upload QE firmware
41851 Define the layout of a binary blob that contains a QE firmware and instructions
41852 on how to upload it. Add function qe_upload_firmware() to parse the blob and
41853 perform the actual upload. Add command-line command "qe fw" to take a firmware
41854 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
41855 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
41856 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
41858 Signed-off-by: Timur Tabi <timur@freescale.com>
41860 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
41861 Author: Kumar Gala <galak@kernel.crashing.org>
41862 Date: Tue Jan 8 01:22:21 2008 -0600
41864 85xx: Remove cache config from configs.h
41866 Either use the standard defines in asm/cache.h or grab the information
41867 at runtime from the L1CFG SPR.
41869 Also, minor cleanup in cache.h to make the code a bit more readable.
41871 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41873 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
41874 Author: robert lazarski <robertlazarski@gmail.com>
41875 Date: Fri Dec 21 10:39:27 2007 -0500
41877 mpc85xx: Add support for ATUM8548 (updated)
41879 Add support for Instituto Atlantico's ATUM8548 board
41881 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
41882 Signed-off-by: Andy Fleming <afleming@freescale.com>
41884 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
41885 Author: robert lazarski <robertlazarski@gmail.com>
41886 Date: Fri Dec 21 10:36:37 2007 -0500
41888 mpc85xx: Add support for ATUM8548 (updated)
41890 Add support for Instituto Atlantico's ATUM8548 board
41892 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
41894 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
41895 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
41896 Date: Thu Dec 13 06:45:14 2007 -0600
41898 mpc85xx: Add support for SBC8548 (updated)
41900 Add support for Wind River's SBC8548 reference board.
41902 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
41904 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
41905 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
41906 Date: Thu Dec 13 06:45:08 2007 -0600
41908 mpc85xx: Add support for SBC8548 (updated)
41910 Add support for Wind River's SBC8548 reference board.
41912 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
41913 Signed-off by: Andy Fleming <afleming@freescale.com>
41915 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
41916 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
41917 Date: Mon Oct 22 19:58:19 2007 +0400
41919 MPC8568E-MDS: set up QE pario for UART1
41921 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
41922 be set up appropriately.
41924 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
41926 commit ad162249cb371e9e38971676f09be791e5f3cf4a
41927 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
41928 Date: Mon Oct 22 18:12:46 2007 +0400
41930 MPC8568E-MDS: reset UCCs to use them reliably
41932 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
41935 p.s Similar code exists in the Linux kernel board file (for capability
41936 reasons with older U-Boots), but should be removed some day.
41938 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
41940 commit 2146cf56821c3364786ca94a7306008c5824b238
41941 Author: Kumar Gala <galak@kernel.crashing.org>
41942 Date: Wed Dec 19 01:18:15 2007 -0600
41944 Reworked FSL Book-E TLB macros to be more readable
41946 The old macros made it difficult to know what WIMGE and perm bits
41947 were set for a TLB entry. Actually use the bit masks for these items
41948 since they are only a single bit.
41950 Also moved the macros into mmu.h out of e500.h since they aren't specific
41953 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41955 commit 1d47273d46925929f8f2c1913cd96d7257aade88
41956 Author: Kumar Gala <galak@kernel.crashing.org>
41957 Date: Tue Dec 18 23:21:51 2007 -0600
41959 Use FSL Book-E MMU macros from Linux Kernel
41961 Grab the FSL Book-E MAS register macros from Linux. Also added
41962 defines for page sizes up to 4TB and removed SHAREN since it doesnt
41965 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41967 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
41968 Author: Andy Fleming <afleming@freescale.com>
41969 Date: Wed Jan 9 13:51:32 2008 -0600
41971 Fix my own merge stupidity
41973 Way back in August I merged Heiko's patch:
41974 566a494f592: [PCS440EP] upgrade the PCS440EP board
41976 with Jon's CONFIG_COMMANDS patches.
41978 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
41980 However, in the process, I left out some of Heiko's good changes.
41982 Now Heiko's and Jon's patches are properly merged in fat_register_device()
41984 Signed-off-by: Andy Fleming <afleming@freescale.com>
41986 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
41987 Author: James Yang <James.Yang@freescale.com>
41988 Date: Wed Jan 9 11:17:49 2008 -0600
41990 Expose parse_line() globally.
41992 Add new function readline_into_buffer() that allows the
41993 output of readline to be put into a pointer to char buffer.
41995 This refactoring allows other functions besides the
41996 main command loop to also use the same input mechanism.
41998 Signed-off-by: James Yang <James.Yang@freescale.com>
41999 Acked-by: Jon Loeliger <jdl@freescale.com>
42001 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
42002 Author: Guennadi Liakhovetski <lg@denx.de>
42003 Date: Wed Jan 9 01:15:25 2008 +0100
42005 trivial: fix consequences of a bad merge
42007 Fix what looks like a merge artifact.
42009 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
42011 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
42012 Author: Zhang Wei <wei.zhang@freescale.com>
42013 Date: Thu Jan 3 10:51:15 2008 +0800
42015 Add Ctrl combo key support to usb keyboard driver.
42017 Ctrl combo key support is added, which is very useful to input Ctrl-C
42018 for interrupt current job.
42019 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
42020 key input when tstc() is called.
42022 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42024 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
42025 Author: Marcel Ziswiler <marcel@ziswiler.com>
42026 Date: Sun Dec 30 03:30:56 2007 +0100
42028 fix various comments
42030 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
42032 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
42033 Author: Marcel Ziswiler <marcel@ziswiler.com>
42034 Date: Sun Dec 30 03:30:46 2007 +0100
42036 fix comments with new drivers organization
42038 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
42040 commit a9b410dc7d2a4721c408b13abfc037988150f145
42041 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
42042 Date: Fri Dec 28 12:50:59 2007 +0900
42044 Remove the obsolete terse version of do_mii()
42046 We now have more useful version of do_mii() and everybody use it.
42047 Gerald Van Baren says:
42049 > When I originally wrote the mii command 6(!) years ago, I wrote a
42050 > verbose version that printed human readable decomposition of the flags,
42051 > etc., and a terse one that didn't print as much stuff and thus had a
42052 > smaller memory footprint.
42054 > It sounds like the terse version has withered and died, apparently
42055 > people are only using the verbose version (which is very understandable,
42058 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
42059 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
42061 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
42062 Author: Mike Frysinger <vapier@gentoo.org>
42063 Date: Thu Dec 27 13:42:56 2007 -0500
42065 Do not reference sha1.c when building mkimage.
42067 remove sha1.o from mkimage linking since it isn't actually used.
42069 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
42071 commit b9173af73e524d37c812f210173cf83385c5171a
42072 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
42073 Date: Thu Dec 27 15:39:54 2007 +0900
42075 common/cmd_mii.c: Add sanity argc check
42077 If type mii command without arguments, we suffer from uninitialized argv[]
42078 entries; for example we MIPS get stuck by TLB error.
42080 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
42082 commit 500856eb1707ed17d9204baa61dd59948d3b2899
42083 Author: Rafal Jaworowski <raj@semihalf.com>
42084 Date: Wed Jan 9 19:39:36 2008 +0100
42086 API for external applications.
42088 This is an API for external (standalone) applications running on top of
42089 U-Boot, and is meant to be more extensible and robust than the existing
42090 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
42093 Included is the demo application using this new framework (api_examples).
42095 Please note this is still an experimental feature, and is turned off by
42098 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
42100 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
42101 Author: Jon Loeliger <jdl@freescale.com>
42102 Date: Wed Jan 9 12:14:55 2008 -0600
42104 86xx: Remove cache config from configs.h
42106 Just use the standard defines in asm/cache.h.
42108 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42110 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
42111 Author: Rafal Jaworowski <raj@semihalf.com>
42112 Date: Wed Jan 9 18:05:27 2008 +0100
42114 Globalize envmatch()
42116 The newly introduced API (routines related to env vars) will need to call
42119 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
42121 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
42122 Author: Jon Loeliger <jdl@freescale.com>
42123 Date: Fri Jan 4 12:07:27 2008 -0600
42125 Convert MPC8610HPCD to use libfdt.
42127 Assumes the presence of the aliases node in the DTS to
42128 locate the pci and serial nodes for fixups.
42130 Use consistent fdtaddr and fdtfile in environment variables.
42132 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42134 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
42135 Author: Jon Loeliger <jdl@freescale.com>
42136 Date: Fri Jan 4 11:58:23 2008 -0600
42138 8610: Fix lingering compile warnings.
42142 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42144 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
42145 Author: Wolfgang Denk <wd@denx.de>
42146 Date: Wed Jan 9 15:14:46 2008 +0100
42148 Coding Style cleanup, update CHANGELOG
42150 Signed-off-by: Wolfgang Denk <wd@denx.de>
42152 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
42153 Author: Mike Frysinger <vapier@gentoo.org>
42154 Date: Tue Dec 18 04:29:55 2007 -0500
42156 fix easylogo on big endian dev systems
42158 didnt realize how out of shape easylogo actually was until i tried using it.
42159 this patch does byte swapping as need be on the input tga header since the tga
42160 is in little endian but the host could just as well be big endian. i didnt
42161 bother using bswap macros or such stuff from system headers as nothing in
42162 POSIX dictates byte swapping functionality.
42164 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
42166 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
42167 Author: Mike Frysinger <vapier@gentoo.org>
42168 Date: Tue Dec 18 03:23:25 2007 -0500
42172 - make the Makefile not suck
42173 - include proper headers for prototypes
42174 - fix obvious broken handling of strchr() when handling '.' in filenames
42176 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
42178 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
42179 Author: raptorbrino@aim.com <raptorbrino@aim.com>
42180 Date: Thu Dec 13 21:23:28 2007 -0500
42182 Fix build problems under Cygwin
42184 This patch allows u-boot to build without error in a cygwin
42185 environment. Cygwin does not define __u64 in it's
42186 include/asm/types.h file. The -idirafter flag in the u-boot
42187 build causes the inclusion of the cygwin types.h file as opposed
42188 to u-bot/include/asm/types.h file which does define __u64.
42189 Subsequently, sha1.c compile fails due to unknown symbol.
42191 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
42193 commit 43ef1c381f9195504a2488f5cb909227eb97d475
42194 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
42195 Date: Fri Nov 30 17:29:59 2007 +0100
42197 cmd_bmp: Add support for displaying gzip compressed bmps
42199 The existing code can show information about a gzip compressed BMP
42200 image, but can't actually display it.
42202 Therefore, move the decompression code out of bmp_info() and use it in
42203 bmp_display() as well in order to display a compressed BMP image.
42205 Also, clean things up a bit and fix a memory leak while we're at it.
42207 [hskinnemoen@atmel.com: a bit of refactoring]
42208 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42210 commit d197ffd8172c6fdef38733424640a9a47295d6e9
42211 Author: Guennadi Liakhovetski <lg@denx.de>
42212 Date: Thu Nov 29 21:15:56 2007 +0100
42214 Fix and optimize MII operations on FEC (MPC8xx) controllers
42216 This patch fixes several issues at least on a MPC885 based system with two
42217 FEC interfaces used in MII mode.
42219 1. PHY discovery should first read PHY_PHYIDR2 register and only then
42220 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
42221 otherwise the values read are wrong. Also notice, that PHY discovery
42222 cannot work on MPC88x / MPC87x in setups with both FECs active at all
42223 in its present form, because for both interfaces the registers from FEC
42224 1 are used to communicate over MII.
42226 2. Remove code duplication for resetting the FEC by isolating it into a
42229 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
42231 4. Optimize mii_init() to only reset the FEC 1 controller once.
42233 5. Fix a typo in mii_init() using index i instead of j thus potentially
42234 leading to unpredictable results.
42236 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
42238 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
42239 Author: Guennadi Liakhovetski <lg@denx.de>
42240 Date: Tue Nov 20 13:14:20 2007 +0100
42242 Fix endianness conversions in rtl8169 driver
42244 It is unclear on what platforms this driver has been tested, since
42245 noone up to now defines CONFIG_RTL8169 in the board configuration
42246 header. Now it has been fixed for a big-endian mpc8241 based
42247 linkstation platform. This patch presents the necessary endianness
42250 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
42252 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
42253 Author: Zhang Wei <wei.zhang@freescale.com>
42254 Date: Thu Jan 3 10:51:15 2008 +0800
42256 Add Ctrl combo key support to usb keyboard driver.
42258 Ctrl combo key support is added, which is very useful to input Ctrl-C
42259 for interrupt current job.
42260 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
42261 key input when tstc() is called.
42263 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42264 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42266 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
42267 Author: Wolfgang Denk <wd@denx.de>
42268 Date: Wed Jan 9 13:43:38 2008 +0100
42270 Coding Style clenaup; update CHANGELOG
42272 Signed-off-by: Wolfgang Denk <wd@denx.de>
42274 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
42275 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42276 Date: Thu Dec 27 17:13:11 2007 +0100
42278 Remove bit swapping in Xilinx Spartan bitfile loading
42280 This patch removes the unnecessary bit swapping when
42281 booting .bit files with the 'fpga loadb' command.
42283 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42285 commit 437fc7327f0611f82937858f2d80e4cd61b40984
42286 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42287 Date: Thu Dec 27 17:13:05 2007 +0100
42289 Fix MSB check in Xilinx Spartan slave serial mode
42291 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42293 commit 3bff4ffa33729a42645e328a21e8d16488872958
42294 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42295 Date: Thu Dec 27 17:12:56 2007 +0100
42297 Add new Xilinx Spartan FPGA types
42299 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42301 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
42302 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42303 Date: Thu Dec 27 17:12:43 2007 +0100
42305 Add pre and post configuration callbacks for Spartan FPGAs
42307 This patch adds a post configuration callback for Spartan2/3 FPGAs.
42308 pre and post configuration callback are now optional and
42309 not called when the function pointer is set to NULL.
42311 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42313 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
42314 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42315 Date: Thu Dec 27 17:12:34 2007 +0100
42317 Improve configuration of FPGA subsystem
42319 This patch removes the FPGA subsystem configuration through
42320 the CONFIG_FPGA bitmask configuration option.
42322 See README for the new options:
42325 CONFIG_FPGA_<vendor>,
42326 CONFIG_FPGA_<family>
42328 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42330 commit 95c6bc7d4a3588b452baca610f8c795a83630477
42331 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42332 Date: Thu Dec 27 16:55:17 2007 +0100
42334 Add Epson RX8025 RTC support
42336 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42338 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
42339 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42340 Date: Thu Dec 27 16:57:23 2007 +0100
42342 serial: Make default_serial_console() a weak function
42344 With this patch it is possible to reimplement default_serial_console()
42345 in board specific code. This will be done in the upcomming PMC440
42346 U-Boot port. This also allows the lwmon board maintainer to
42347 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
42349 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42351 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
42352 Author: Harald Welte <laforge@openmoko.org>
42353 Date: Wed Dec 19 14:14:47 2007 +0100
42355 add 'terminal program' functionality
42357 This patch adds a 'cu' like serial terminal command to u-boot
42358 using which you can access other serial ports from the system console.
42360 OpenMoko uses this in their Neo1973 phones to get access to the GSM
42361 Modem and GPS chip from the bootloader.
42363 Signed-off-by: Harald Welte <laforge@openmoko.org>
42365 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
42366 Author: Harald Welte <laforge@openmoko.org>
42367 Date: Wed Dec 19 14:12:53 2007 +0100
42369 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
42370 that used to exist with the legacy NAND code
42372 Signed-off-by: Harald Welte <laforge@openmoko.org>
42374 commit f540c42d9564854b19ce9bbb70affe172529fe70
42375 Author: Harald Welte <laforge@openmoko.org>
42376 Date: Wed Dec 19 14:09:58 2007 +0100
42378 Fix building with CRAMFS but not JFFS2 support
42380 Signed-off-by: Harald Welte <laforge@openmoko.org>
42382 commit 23d0baf967fecdaf1804f045f6339337c5607eec
42383 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42384 Date: Sat Dec 22 15:52:58 2007 +0100
42386 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
42388 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
42389 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42391 commit 23776ff292966a85d811126933830bed48211826
42392 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42393 Date: Tue Dec 11 10:53:12 2007 +0100
42395 ARM: support board-specific ethernet PHY init
42397 Add until the new phylib will be arrived
42399 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42401 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
42402 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42403 Date: Sat Dec 8 16:34:08 2007 +0100
42405 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
42407 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42409 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
42410 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42411 Date: Sun Dec 9 11:01:10 2007 +0100
42413 Add missing file in gitignore and comments
42415 based on Linux source tree's .gitignore files
42417 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
42419 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
42420 Author: Wolfgang Denk <wd@denx.de>
42421 Date: Wed Jan 9 11:36:21 2008 +0100
42423 Coding Style cleanup, update CHANGELOG
42425 Signed-off-by: Wolfgang Denk <wd@denx.de>
42427 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
42428 Author: Stefan Roese <sr@denx.de>
42429 Date: Wed Jan 9 10:38:58 2008 +0100
42431 POST: Execute SPR test after relocation
42433 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
42434 self modifying code and this doesn't work with stack in d-cache, since
42435 I can't move the code from d-cache to i-cache. We move the SPR test to
42436 be executed a little later, after relocation. Then stack is located in
42437 SDRAM and this self-modifying code is no problem anymore.
42439 Signed-off-by: Stefan Roese <sr@denx.de>
42441 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
42442 Author: Stefan Roese <sr@denx.de>
42443 Date: Wed Jan 9 10:28:20 2008 +0100
42445 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
42447 This patch configures the LWMON5 port to use d-cache as init-ram and
42448 the unused GPT0_COMP6 as POST WORD storage.
42450 Signed-off-by: Stefan Roese <sr@denx.de>
42452 commit 1754f50b710194f886b6f2831803d8960171a14d
42453 Author: Stefan Roese <sr@denx.de>
42454 Date: Wed Jan 9 10:25:46 2008 +0100
42456 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
42458 The privious 4xx POST implementation only supported storing the POST
42459 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
42460 we need to store the POST WORD in some other non volatile location.
42461 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
42464 Signed-off-by: Stefan Roese <sr@denx.de>
42466 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
42467 Author: Stefan Roese <sr@denx.de>
42468 Date: Wed Jan 9 10:23:16 2008 +0100
42470 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
42472 This patch adds support for locking the init-ram/stack in d-cache,
42473 so that other regions may use d-cache as well
42475 Note, that this current implementation locks exactly 4k of d-cache,
42476 so please make sure that you don't define a bigger init-ram area. Take
42477 a look at the lwmon5 440EPx implementation as a reference.
42479 Signed-off-by: Stefan Roese <sr@denx.de>
42481 commit 0ddb89601a8d29e808db450366752ffdc6267c53
42482 Author: Wolfgang Denk <wd@denx.de>
42483 Date: Wed Jan 9 10:16:33 2008 +0100
42485 Fix memset bug in ext2fs_read_file()
42487 ext2fs_read_file() had the function arguments swapped.
42489 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
42491 Signed-off-by: Wolfgang Denk <wd@denx.de>
42493 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
42494 Author: Markus Klotzbücher <mk@denx.de>
42495 Date: Tue Jan 5 08:17:15 1988 +0100
42497 Fix problems with usb storage devices on MPC5200 /TQM5200
42499 The MPC5200 OHCI controller operates in big endian, so
42500 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
42502 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42504 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
42505 Author: Wolfgang Denk <wd@denx.de>
42506 Date: Tue Jan 8 22:58:27 2008 +0100
42508 Fix compile problem with new env code.
42510 Signed-off-by: Wolfgang Denk <wd@denx.de>
42512 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
42513 Author: Markus Klotzbücher <mk@denx.de>
42514 Date: Tue Nov 27 10:23:20 2007 +0100
42516 tools: fix fw_printenv tool to compile again
42518 This patch updates the fw_printenv/fw_setenv userspace tool to include
42519 the correct MTD header in order to compile against current kernel
42520 headers. Backward compatibility is preserved by introducing an option
42521 MTD_VERSION which can be set to "old" for compilation using the old MTD
42522 headers. Along with this a number of warnings are fixed.
42524 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42526 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
42527 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42528 Date: Tue Jan 8 15:40:09 2008 +0100
42530 ppc4xx: assign PCI interrupts on seuqoia boards
42532 Some operating systems rely on assigned PCI interrupts.
42534 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42536 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
42537 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42538 Date: Tue Jan 8 15:50:49 2008 +0100
42540 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
42542 This patch allows the use of 4xx interrupt vector number defines
42543 in board specific code outside cpu/ppc4xx.
42545 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42547 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
42548 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42549 Date: Tue Jan 8 15:39:01 2008 +0100
42551 ppc4xx: Fix UIC2 vector number base
42553 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42555 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
42556 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42557 Date: Tue Jan 8 12:49:58 2008 +0100
42559 ppc4xx: Update PLB/PCI divider for PMC440 board
42561 This patch updates the PLB/PCI divider when running at
42562 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
42564 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42566 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
42567 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42568 Date: Tue Jan 8 11:13:09 2008 +0100
42570 ppc4xx: Disable error message when no NAND chip is installed on PMC440
42572 Add CFG_NAND_QUIET_TEST option to disable error message when
42573 no NAND chip is installed on PMC440 boards.
42575 Disable a couple of config defines that are only used for NAND_U_BOOT.
42577 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42579 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
42580 Author: Wolfgang Denk <wd@denx.de>
42581 Date: Tue Jan 8 22:58:27 2008 +0100
42583 Fix compile problem with new env code.
42585 Signed-off-by: Wolfgang Denk <wd@denx.de>
42587 commit 6de66b35426312a21174a9bf0576a094e2904bea
42588 Author: Markus Klotzbücher <mk@denx.de>
42589 Date: Tue Nov 27 10:23:20 2007 +0100
42591 tools: fix fw_printenv tool to compile again
42593 This patch updates the fw_printenv/fw_setenv userspace tool to include
42594 the correct MTD header in order to compile against current kernel
42595 headers. Backward compatibility is preserved by introducing an option
42596 MTD_VERSION which can be set to "old" for compilation using the old MTD
42597 headers. Along with this a number of warnings are fixed.
42599 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42601 commit ad3006fe7e84667021753b74247b0bafd97ba35f
42602 Author: Gerald Van Baren <vanbaren@cideas.com>
42603 Date: Mon Jan 7 23:47:32 2008 -0500
42605 LIBFDT: use memmove() instead of memcpy()
42607 This is partial patch from the DTC/libfdt
42608 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
42609 Author: David Gibson <david@gibson.dropbear.id.au>
42610 Date: Wed Nov 21 11:56:14 2007 +1100
42612 The patch also fixes one genuine bug caught by valgrind -
42613 _packblocks() in fdt_rw.c was using memcpy() where it should have been
42616 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
42618 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
42619 Author: David Gibson <david@gibson.dropbear.id.au>
42620 Date: Mon Dec 17 14:42:07 2007 +1100
42622 libfdt: Add more documentation (patch the seventh)
42624 This patch adds more documenting comments to libfdt.h. Specifically,
42625 these document the read/write functions (not including fdt_open_into()
42626 and fdt_pack(), for now).
42628 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
42630 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
42631 Author: David Gibson <david@gibson.dropbear.id.au>
42632 Date: Mon Dec 17 14:41:52 2007 +1100
42634 libfdt: Add more documentation (patch the sixth)
42636 This patch adds some more documenting comments to libfdt.h.
42637 Specifically this documents all the write-in-place functions.
42639 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
42641 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
42642 Author: Gerald Van Baren <vanbaren@cideas.com>
42643 Date: Sat Dec 29 22:45:27 2007 -0500
42645 Fine grained per property /chosen updating.
42647 Implement a suggestion by Scott Wood to make the /chosen handling fine
42648 grained. Don't overwrite pre-existing properties on a per-property basis,
42649 so if /chosen exists but a necessary /chosen/property doesn't, it gets
42650 created. If a /chosen property exists, it is NOT overwritten unless the
42651 "force" flag is true.
42653 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
42655 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
42656 Author: Gerald Van Baren <vanbaren@cideas.com>
42657 Date: Sat Jan 5 15:33:29 2008 -0500
42659 Improve the FDT help message.
42661 Add a note that "fdt copy" makes the new address active.
42662 Remove most of the extra hints at the end of the fdt help.
42664 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
42666 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
42667 Author: Gerald Van Baren <vanbaren@cideas.com>
42668 Date: Sat Jan 5 14:52:04 2008 -0500
42670 Support setting FDT properties with optional values.
42672 Fix a bug found and documented by Bartlomiej Sieka where the optional
42673 value on "fdt set <path> <prop> [<val>]" wasn't optional.
42675 => fdt mknode / testnode
42676 => fdt print /testnode
42679 => fdt set /testnode testprop
42680 => fdt print /testnode
42685 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
42687 commit 22fb2246df91bfc840d87f0c5910818bad55577a
42688 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42689 Date: Fri Dec 28 11:56:30 2007 +0100
42691 Add fdt_find_and_setprop() to fdt_support.h
42693 fdt_find_and_setprop() is used by several 4xx boards and it's
42694 missing in the appropriate header. This patch eliminates a
42695 warning when building U-Boot for such boards.
42697 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42698 Acked-by: Stefan Roese <sr@denx.de>
42700 commit 802b769bac17b0560d3535a42c502469ee190cd1
42701 Author: Stefan Roese <sr@denx.de>
42702 Date: Tue Jan 8 18:39:30 2008 +0100
42704 ppc4xx: Return 0 on success in 4xx ethernet driver
42706 Signed-off-by: Stefan Roese <sr@denx.de>
42708 commit 6775c68683a53c7abc778774641aac6f833a2cbf
42709 Author: Kim Phillips <kim.phillips@freescale.com>
42710 Date: Tue Jan 8 09:59:49 2008 -0600
42712 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
42714 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42716 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
42717 Author: Kim Phillips <kim.phillips@freescale.com>
42718 Date: Thu Dec 20 16:28:34 2007 -0600
42720 mpc83xx: rm remaining FLAT_TREE code
42722 ..in board pci.c files
42724 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42726 commit b3458d2cd55d01732e30a76d898afd99e871cd67
42727 Author: Kim Phillips <kim.phillips@freescale.com>
42728 Date: Thu Dec 20 15:57:28 2007 -0600
42730 mpc83xx: remove FLAT_TREE code
42732 need to rm it from pci code, too!
42734 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42736 commit 5b8bc606c61456566af6912f818a153b6b06f242
42737 Author: Kim Phillips <kim.phillips@freescale.com>
42738 Date: Thu Dec 20 14:09:22 2007 -0600
42740 mpc83xx: convert to using do_fixup_*()
42742 convert to using simpler mpc85xx style fdt update code; streamline by
42743 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
42744 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
42745 converted over to using libfdt).
42747 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42749 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
42750 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
42751 Date: Thu Dec 20 12:58:51 2007 -0500
42753 sbc8349: enable libfdt by default on WRS SBC8349 board.
42755 Make libfdt the default for the WRS SBC8349 board.
42756 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
42757 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
42759 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
42761 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
42762 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
42763 Date: Thu Dec 20 12:58:16 2007 -0500
42765 sbc8349: migrate board to libfdt
42767 This adds libfdt support code for the Wind River sbc8349 board.
42769 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
42770 the other Freescale 83xx boards.
42772 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
42774 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
42775 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
42776 Date: Thu Dec 20 12:56:19 2007 -0500
42778 sbc8349: Remove board specific ECC code
42780 ECC code is now shared for all 83xx boards, so remove board specific one.
42781 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
42783 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
42785 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
42786 Author: Kim Phillips <kim.phillips@freescale.com>
42787 Date: Thu Dec 20 01:30:48 2007 -0600
42789 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
42791 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
42793 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42795 commit ccf21c311e68d48399eff1e72936052885f6e3f7
42796 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
42797 Date: Thu Dec 6 16:43:40 2007 +0100
42799 Add support CONFIG_UEC_ETH3 in MPC83xx
42801 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
42803 commit e6af9932d31171e35db880e7b2f29f903b1b7660
42804 Author: Kumar Gala <galak@kernel.crashing.org>
42805 Date: Mon Nov 26 11:00:54 2007 -0600
42807 Remove CONFIG options related to OF that we dont use
42809 The MPC8360E MDS config defined:
42811 CONFIG_OF_HAS_UBOOT_ENV
42813 Which we don't use or ever needed. This seems like copy-paste feature creep.
42815 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42817 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
42818 Author: Kim Phillips <kim.phillips@freescale.com>
42819 Date: Mon Dec 10 14:16:22 2007 -0600
42821 mpc83xx: supress compiler warning
42823 mpc8360emds.c: In function ‘ft_board_setup’:
42824 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
42825 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
42827 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42829 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
42830 Author: Kim Phillips <kim.phillips@freescale.com>
42831 Date: Tue Nov 27 14:17:29 2007 -0600
42833 mpc83xx: fix remaining fdt_find_node_by_path references
42835 rename to fdt_path_offset
42837 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42839 commit 921d4b19ad1be704df58725485d9292dc0414adf
42840 Author: Kim Phillips <kim.phillips@freescale.com>
42841 Date: Mon Nov 19 12:30:09 2007 -0600
42843 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
42845 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
42846 This change guarantees that the environment will be located on the
42847 first flash sector after the U-Boot image.
42849 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42851 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
42852 Author: Kim Phillips <kim.phillips@freescale.com>
42853 Date: Fri Nov 9 14:28:08 2007 -0600
42855 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
42857 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
42858 properties in the device tree so the PHY gets configured for internal delay on
42859 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
42861 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42863 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
42864 Author: Dave Liu <r63238@freescale.com>
42865 Date: Tue Sep 18 12:41:15 2007 +0800
42867 mpc83xx: update the CREDITS and MAINTAINERS
42869 update the CREDITS and MAINTAINERS.
42871 Signed-off-by: Dave Liu <daveliu@freescale.com>
42873 commit b21add4b42af7b767448251b599b91066a160e0d
42874 Author: Dave Liu <r63238@freescale.com>
42875 Date: Tue Sep 18 12:40:21 2007 +0800
42877 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
42879 Add the MAINTAINER and MAKEALL entries for mpc837xemds
42881 Signed-off-by: Dave Liu <daveliu@freescale.com>
42883 commit f8900ce9094c462355eb792eea264ff16ac8fd16
42884 Author: Dave Liu <r63238@freescale.com>
42885 Date: Tue Sep 18 12:38:53 2007 +0800
42887 mpc83xx: Add the MPC837xEMDS board readme
42889 Add the README.mpc837xemds to /doc
42891 Signed-off-by: Dave Liu <daveliu@freescale.com>
42893 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
42894 Author: Dave Liu <r63238@freescale.com>
42895 Date: Tue Sep 18 12:37:57 2007 +0800
42897 mpc83xx: Add the support of MPC837xEMDS board
42899 The MPC837xEMDS board support:
42900 * DDR2 400MHz hardcoded and SPD init
42901 * Local bus NOR Flash
42902 * I2C, UART, MII and RTC
42906 Signed-off-by: Dave Liu <daveliu@freescale.com>
42908 commit 555da61702771fe0f76f3de23b4e7590f3704161
42909 Author: Dave Liu <r63238@freescale.com>
42910 Date: Tue Sep 18 12:36:58 2007 +0800
42912 mpc83xx: Add the support of MPC8315E SoC
42914 The MPC8315E SoC including e300c3 core and new IP blocks,
42915 such as TDM, PCI Express and SATA controller.
42917 Signed-off-by: Dave Liu <daveliu@freescale.com>
42919 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
42920 Author: Dave Liu <r63238@freescale.com>
42921 Date: Tue Sep 18 12:36:11 2007 +0800
42923 mpc83xx: Add the support of MPC837x SoC
42925 The MPC837x SoC including e300c4 core and new IP blocks,
42926 such as SDHC, PCI Express and SATA controller.
42928 Signed-off-by: Dave Liu <daveliu@freescale.com>
42930 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
42931 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
42932 Date: Wed Nov 14 18:54:53 2007 +0300
42934 MPC8360E-MDS: configure and enable second UART
42936 Despite user manual, BCSR9.7 is negated (high) on HRST, so
42937 UART2 is disabled. Fix that and configure QE pins properly.
42939 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
42941 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
42942 Author: Timur Tabi <timur@freescale.com>
42943 Date: Mon Nov 5 09:34:06 2007 -0600
42945 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
42947 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
42948 currently-defined 83xx boards. This change guarantees that the environment
42949 will be located on the first flash sector after the U-Boot image.
42951 Signed-off-by: Timur Tabi <timur@freescale.com>
42952 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42954 commit e05329516a13616b53240cd85b739217c2bf87f1
42955 Author: Larry Johnson <lrj@acm.org>
42956 Date: Fri Jan 4 13:27:02 2008 -0500
42958 ppc4xx: Remove weak binding from common Denali data-eye search code
42960 Now that there are no board-specific versions of
42961 "denali_core_search_data_eye()", the weak binding on the common version
42964 Signed-off-by: Larry Johnson <lrj@acm.org>
42966 commit 5ba576c01602fd328800a427964c36a0a05c5dce
42967 Author: Stefan Roese <sr@denx.de>
42968 Date: Sat Jan 5 09:13:46 2008 +0100
42970 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
42972 Signed-off-by: Stefan Roese <sr@denx.de>
42974 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
42975 Author: Stefan Roese <sr@denx.de>
42976 Date: Sat Jan 5 09:12:41 2008 +0100
42978 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
42980 On Katmai the complete auto-calibration somehow doesn't seem to
42981 produce the best results, meaning optimal values for RQFD/RFFD.
42982 This was discovered by GDA using a high bandwidth scope,
42983 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
42984 so now on Katmai "only" RFFD is auto-calibrated.
42986 This patch also adds RDCC calibration as mentioned on page 7 of
42987 the AMCC PowerPC440SP/SPe DDR2 application note:
42988 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
42990 Signed-off-by: Stefan Roese <sr@denx.de>
42992 commit 49db47b8ae6afff2b898be312948ff501357dc80
42993 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42994 Date: Wed Jan 2 16:48:42 2008 +0100
42996 ppc4xx: Remove sdram.h from PMC440 board
42998 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43000 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
43001 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43002 Date: Wed Jan 2 16:48:34 2008 +0100
43004 ppc4xx: use common denali core defines and data eye search code for PMC440
43006 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43008 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
43009 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43010 Date: Wed Jan 2 12:05:14 2008 +0100
43012 ppc4xx: More cleanup for esd's LCD code
43014 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43016 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
43017 Author: Stefan Roese <sr@denx.de>
43018 Date: Fri Jan 4 12:00:01 2008 +0100
43020 ppc4xx: Fix Sequoia NAND booting target
43022 The Sequoia NAND booting target now uses the recently extracted
43023 cpu/ppc4xx/denali_data_eye.c file too.
43025 Signed-off-by: Stefan Roese <sr@denx.de>
43027 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
43028 Author: Lawrence R. Johnson <lrj@acm.org>
43029 Date: Thu Jan 3 15:02:02 2008 -0500
43031 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
43033 Signed-off-by: Larry Johnson <lrj@acm.org>
43035 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
43036 Author: Lawrence R. Johnson <lrj@acm.org>
43037 Date: Fri Jan 4 02:11:56 2008 -0500
43039 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
43041 Note: this patch changes the configuration of some GPIO registers:
43043 Register Old Value New Value
43044 --------------- ---------- ----------
43045 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
43046 DCR GPIO0_TSRH 0x55005000 0x00000000
43047 DCR GPIO1_TCR 0xC2000000 0xE2000000
43048 DCR GPIO1_TSRL 0x0C000000 0x00200000
43049 DCR GPIO1_ISR2L 0x00050000 0x00110000
43051 Signed-off-by: Larry Johnson <lrj@acm.org>
43053 commit 5ab884b254ca2e707ab50545cd705f30108cf491
43054 Author: Lawrence R. Johnson <lrj@acm.org>
43055 Date: Thu Jan 3 18:54:00 2008 -0500
43057 ppc4xx: Add functionality to GPIO support
43059 This patch makes two additions to GPIO support:
43061 First, it adds function gpio_read_in_bit() to read the a bit from the
43062 GPIO Input Register (GPIOx_IR) in the same way that function
43063 gpio_read_out_bit() reads a bit from the GPIO Output Register
43066 Second, it modifies function gpio_set_chip_configuration() to provide
43067 an additional option for configuring the GPIO from the
43068 "CFG_4xx_GPIO_TABLE".
43070 According to the 440EPx User's Manual, when an alternate output is used,
43071 the three-state control is configured in one of two ways, depending on
43072 the particular output. The first option is to select the corresponding
43073 alternate three-state control in the GPIOx_TRSH/L registers. The second
43074 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
43075 the GPIOx_TRSH/L registers, and set the corresponding bit in the
43076 GPIOx_TCR register to enable the output. For example, the Manual
43077 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
43078 the alternate three-state control (first option), and specifies
43079 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
43080 enabled in the GPIOx_TCR register (second option).
43082 Currently, gpio_set_chip_configuration() configures all alternate signal
43083 outputs to use the first option. This patch allow the second option to
43084 be selected by setting the "out_val" element in the table entry to
43085 "GPIO_OUT_1". The first option is used when the "out_val" element is
43086 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
43087 alternate signal is selected, and because all current GPIO tables set
43088 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
43089 not change any existing configurations.
43091 Signed-off-by: Larry Johnson <lrj@acm.org>
43093 commit 196404cdc1de495d6182e84731c200fc5748df15
43094 Author: Larry Johnson <lrj@arlinx.com>
43095 Date: Sun Dec 30 01:01:54 2007 -0500
43097 PPC4xx: Remove sdram.h from board/lwmon5
43099 These definitions are now in "include/ppc440.h".
43101 Signed-off-by: Larry Johnson <lrj@acm.org>
43103 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
43104 Author: Larry Johnson <lrj@arlinx.com>
43105 Date: Sun Dec 30 01:01:32 2007 -0500
43107 PPC4xx: Use common code for LWMON5 board SDRAM support
43109 This patch also modifies the functionality of the code so that the data-eye
43110 search is now done with with the cache disabled.
43112 Signed-off-by: Larry Johnson <lrj@acm.org>
43114 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
43115 Author: Larry Johnson <lrj@arlinx.com>
43116 Date: Sun Dec 30 01:01:14 2007 -0500
43118 PPC4xx: Remove sdram.h from board/amcc/sequoia
43120 These definitions are now in "include/ppc440.h".
43122 Signed-off-by: Larry Johnson <lrj@acm.org>
43124 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
43125 Author: Larry Johnson <lrj@arlinx.com>
43126 Date: Sun Dec 30 01:00:50 2007 -0500
43128 PPC4xx: Use common code for Sequoia board SDRAM support
43130 Signed-off-by: Larry Johnson <lrj@acm.org>
43132 commit 8b0c5c127690335758100c25eaec2b84db97c101
43133 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43134 Date: Thu Dec 27 16:58:41 2007 +0100
43136 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
43138 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
43139 networking stack does not automatically switch to
43140 another interface. This patch does not touch the default
43143 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43144 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
43146 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
43147 Author: Upakul Barkakaty <upakul@gmail.com>
43148 Date: Thu Nov 29 12:16:13 2007 +0530
43150 NET: Proper return code handling in eth_init() function in file eth.c
43152 This patch modifies the return code handling in the eth_init()
43153 function, to be compatible with the handling of the return codes in
43154 the other network stack files. It now returns a 0 on Success and -1 on
43157 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
43158 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
43160 commit 5ca2d0953e4579a80810966cca2077e20d912c97
43161 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43162 Date: Mon Nov 19 20:27:04 2007 +0900
43164 net/eth.c: Fix env_enetaddr signed overflow
43166 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
43169 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
43177 Warning: NEC-Candy MAC addresses don't match:
43178 Address in SROM is 00:00:4C:80:92:A2
43179 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
43181 This patch changes env_enetaddr type from `char' to `unsigned char'.
43183 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
43184 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
43185 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
43187 commit f85b60710571b37293d2233933b76e2aa3db5635
43188 Author: Rafal Jaworowski <raj@semihalf.com>
43189 Date: Thu Dec 27 18:19:02 2007 +0100
43191 Introduce new eth_receive routine
43193 The purpose of this routine is receiving a single network frame, outside of
43194 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
43195 U-Boot will let them utilise networking facilities. For sending a raw frame
43196 the already existing eth_send() can be used.
43198 The direct consumer of this routine is the newly introduced API layer for
43199 external applications (enabled with CONFIG_API).
43201 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
43202 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
43203 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
43205 commit 5c740711f0ea5b51414b341b71597c4a0751be74
43206 Author: Jon Loeliger <jdl@freescale.com>
43207 Date: Thu Jan 3 10:41:04 2008 -0600
43209 8610: Move include of config.h earlier.
43211 Include config.h earlier in the set of #includes
43212 so as to avoid a incidental and duplicate definition
43213 of CFG_CACHELINE_SIZE.
43215 Signed-off-by: Jon Loeliger
43217 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
43218 Author: Jon Loeliger <jdl@freescale.com>
43219 Date: Tue Dec 4 10:53:34 2007 -0600
43221 Don't slam #undef DEBUG in the 8641HPCN config file.
43223 Doing so prevents it from being individually set
43224 and useful in other files.
43226 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43228 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
43229 Author: Jon Loeliger <jdl@freescale.com>
43230 Date: Wed Nov 28 14:47:18 2007 -0600
43232 Convert MPC8641HPCN to use libfdt.
43234 Assumes the presence of the aliases node in the DTS to
43235 locate the ethernet, pci and serial nodes for fixups.
43237 Use consistent fdtaddr and fdtfile in environment variables.
43239 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43241 commit ce37422d0002e10490e268392e0c4e3028e52cec
43242 Author: Stefan Roese <sr@denx.de>
43243 Date: Wed Jan 2 14:06:26 2008 +0100
43245 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
43247 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
43248 flash chips connected to a 32bit wide port.
43250 Signed-off-by: Stefan Roese <sr@denx.de>
43252 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
43253 Author: Wolfgang Denk <wd@denx.de>
43254 Date: Wed Jan 2 15:58:44 2008 +0100
43256 Fix compile problem introduced by "cleanup" commit 3dfd708c
43258 Signed-off-by: Wolfgang Denk <wd@denx.de>
43260 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
43261 Author: Wolfgang Denk <wd@denx.de>
43262 Date: Wed Jan 2 15:54:45 2008 +0100
43264 Make scripts and Makefiles POSIX compliant
43266 The bash builtin versions of the "test" (resp. "[") command allow
43267 using "==" for string comparisons, but POSIX compatible implemen-
43268 tations (like /usr/bin/test) insist on using "=" only. On such systems
43271 $ /usr/bin/test a == a && echo OK
43272 /usr/bin/test: ==: binary operator expected
43274 This patch fixes Makefiles and scripts to use POSIX style.
43276 Signed-off-by: Wolfgang Denk <wd@denx.de>
43278 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
43279 Author: Stefan Roese <sr@denx.de>
43280 Date: Wed Jan 2 14:05:37 2008 +0100
43282 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
43284 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
43285 flash chips connected to a 32bit wide port.
43287 Signed-off-by: Stefan Roese <sr@denx.de>
43289 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
43290 Author: Wolfgang Denk <wd@denx.de>
43291 Date: Wed Jan 2 12:38:43 2008 +0100
43293 Minor coding style cleanup.
43295 Signed-off-by: Wolfgang Denk <wd@denx.de>
43297 commit e174ac34adf5d5653df12bc3cf19c52063a71269
43298 Author: Stefan Roese <sr@denx.de>
43299 Date: Fri Dec 28 17:29:56 2007 +0100
43301 ppc4xx: Coding style cleanup
43303 Signed-off-by: Stefan Roese <sr@denx.de>
43305 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
43306 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43307 Date: Fri Dec 28 17:07:24 2007 +0100
43309 ppc4xx: Complete PMC440 board support
43311 This patch brings the PMC440 board configuration file.
43312 Finally it enables the PMC440 board support.
43314 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43316 commit 407843a582560fc5231299561ab3c2b6b6cd3397
43317 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43318 Date: Fri Dec 28 17:07:18 2007 +0100
43320 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
43322 This patch adds some BSP commands and FPGA booting support
43323 for esd's PMC440 boards.
43325 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43327 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
43328 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43329 Date: Fri Dec 28 17:07:14 2007 +0100
43331 ppc4xx: Add initial esd PMC440 board files
43333 This patch adds the first files for the new esd PMC440 boards.
43334 The next two patches will complete the PMC440 board support.
43336 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43338 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
43339 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43340 Date: Fri Dec 28 17:10:36 2007 +0100
43342 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
43344 - add EEPROM write protection for esd PLU405 boards.
43345 - initialize NAND GPIOs
43346 - use correct io accessors
43349 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43351 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
43352 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43353 Date: Fri Dec 28 17:10:44 2007 +0100
43355 ppc4xx: use correct io accessors for esd's LCD code
43357 This patch fixes esd's LCD dectection code to work correctly with
43358 newer gcc versions.
43360 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43362 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
43363 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43364 Date: Fri Dec 28 17:10:42 2007 +0100
43366 ppc4xx: Maintenance patch for VOH405 boards
43368 - add EEPROM write protection
43369 - initialize NAND GPIOs
43370 - use correct io accessors
43371 - slow down I2C clock to 100kHz
43372 - enable ext. I2C bus
43375 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43377 commit c05569066dbcba3fdf36d4d1943df265dc316a86
43378 Author: Stefan Roese <sr@denx.de>
43379 Date: Fri Dec 28 16:08:08 2007 +0100
43381 ppc4xx: Enable 405EP PCI arbiter per default on all boards
43383 In an attmemt to clean up the 4xx start.S file, I removed the enabling
43384 of the internal 405EP PCI arbiter. This is needed for multiple other
43385 405EP platforms, like most of the esd 405EP. Now the internal PCI
43386 arbiter is enabled again per default as it has been before.
43388 Signed-off-by: Stefan Roese <sr@denx.de>
43389 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43391 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
43392 Author: Stefan Roese <sr@denx.de>
43393 Date: Fri Dec 28 15:53:46 2007 +0100
43395 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
43397 Signed-off-by: Stefan Roese <sr@denx.de>
43398 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43400 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
43401 Author: Stefan Roese <sr@denx.de>
43402 Date: Fri Dec 28 06:06:04 2007 +0100
43404 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
43406 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
43407 platforms mentioned above.
43409 Signed-off-by: Stefan Roese <sr@denx.de>
43411 commit b568fd25574181a3b12ae3d66b2913903442cb83
43412 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43413 Date: Thu Dec 27 17:03:46 2007 +0100
43415 Remove CPCI440 board
43417 This board never left prototyping state and it
43418 became a millstone round my neck. So remove it.
43420 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43422 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
43423 Author: Larry Johnson <lrj@arlinx.com>
43424 Date: Thu Dec 27 11:28:51 2007 -0500
43426 Add support for Korat PPC440EPx board
43428 These patches add support for the PPC440EPx-based "Korat" board to
43429 U-Boot. They are based primarily on support for the Sequoia board.
43431 Signed-off-by: Larry Johnson <lrj@acm.org>
43433 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
43434 Author: Larry Johnson <lrj@arlinx.com>
43435 Date: Sat Dec 22 15:16:25 2007 -0500
43437 Add configuration file for Korat board
43439 This patch supplies the configuration file for the Korat PPC440EPx-
43442 Signed-off-by: Larry Johnson <lrj@acm.org>
43444 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
43445 Author: Larry Johnson <lrj@arlinx.com>
43446 Date: Sat Dec 22 15:16:11 2007 -0500
43448 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
43450 Signed-off-by: Larry Johnson <lrj@acm.org>
43452 commit aba19604d848b2838cfb9ebe818909e6a216058e
43453 Author: Larry Johnson <lrj@arlinx.com>
43454 Date: Thu Dec 27 10:54:48 2007 -0500
43456 Add 440EPx DDR2 SPD DIMM support
43458 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
43459 controller. It should also work on the 440GRx. It is based on the DDR2
43460 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
43462 This code has been tested on prototype Korat boards with three Kingston
43463 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
43464 (two ranks). The Korat board has a single DIMM socket, but support has
43465 been provided (though not tested) for boards with two DIMM sockets.
43467 Signed-off-by: Larry Johnson <lrj@acm.org>
43469 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
43470 Author: Larry Johnson <lrj@arlinx.com>
43471 Date: Sat Dec 22 15:15:30 2007 -0500
43473 Copy 440EPx/GRx SDRAM data-eye search to common directory
43475 This patch creates a non-board-specific file for performing the SDRAM
43476 data-eye search. It also adds ECC error checking to the test of valid
43477 data on readback when ECC is enabled.
43479 Signed-off-by: Larry Johnson <lrj@acm.org>
43481 commit c46f53333b22b1f9098676bea8884fc7db820cf3
43482 Author: Larry Johnson <lrj@arlinx.com>
43483 Date: Sat Dec 22 15:15:13 2007 -0500
43485 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
43487 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
43488 It also fixes two typos in the definitions, so the board-specific
43489 "sdram.h" files containing these definitions are also fixed to avoid
43492 Signed-off-by: Larry Johnson <lrj@acm.org>
43494 commit c348578bf612d0c56d8d376d23cae16defbd86af
43495 Author: Larry Johnson <lrj@arlinx.com>
43496 Date: Thu Dec 27 10:50:55 2007 -0500
43498 Add Ethernet 1000BASE-X support for PPC4xx
43500 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
43501 is defined, the PHY will advertise it's capabilities for autonegotiation
43502 based on the capabilities shown in the PHY's status registers, including
43503 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
43504 advertise hard-coded capabilities, as before.
43506 Signed-off-by: Larry Johnson <lrj@acm.org>
43508 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
43509 Author: Larry Johnson <lrj@arlinx.com>
43510 Date: Thu Dec 27 09:52:17 2007 -0500
43512 Add driver for National Semiconductor LM73 temperature sensor
43514 This driver is based on the driver for the LM75.
43516 Signed-off-by: Larry Johnson <lrj@acm.org>
43518 commit 12618278688ea9b3d76536960a5ad2e3790fac40
43519 Author: Larry Johnson <lrj@arlinx.com>
43520 Date: Sat Dec 22 15:14:00 2007 -0500
43522 Add driver for STMicroelectronics M41T60 RTC
43524 This driver is based on the driver for the M41T11. In the intended
43525 application, the RTC will be powered by a large capacitor, rather than a
43526 battery. The driver therefore checks to see whether the RTC has lost
43527 power. The chip's OUT bit is normally reset from its power-up state. If
43528 the OUT bit is read as set, or if the date and time are not valid, then the
43529 RTC is assumed to have lost power, and its date and time are reset to
43530 1900-01-01 00:00:00.
43532 Support for adjusting the speed of the clock to improve accuracy is
43533 provided through an environment variable.
43535 Signed-off-by: Larry Johnson <lrj@acm.org>
43537 commit d3471173e14b7544bb60339eda8d3d3906694b0a
43538 Author: Larry Johnson <lrj@arlinx.com>
43539 Date: Sat Dec 22 15:34:39 2007 -0500
43541 Use out_be32() and friends to access memory-mapped registers in sequoia.c
43543 Signed-off-by: Larry Johnson <lrj@acm.org>
43545 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
43546 Author: Larry Johnson <lrj@arlinx.com>
43547 Date: Sat Dec 22 15:34:20 2007 -0500
43549 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
43551 Signed-off-by: Larry Johnson <lrj@acm.org>
43553 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
43554 Author: Larry Johnson <lrj@arlinx.com>
43555 Date: Sat Dec 22 15:23:50 2007 -0500
43557 Cosmetic changes to ECC POST for AMCC Denali core
43559 Signed-off-by: Larry Johnson <lrj@acm.org>
43561 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
43562 Author: Stefan Roese <sr@denx.de>
43563 Date: Wed Dec 26 20:20:19 2007 +0100
43565 ppc4xx: Fix compilation problem in 405 cache POST test
43567 Signed-off-by: Stefan Roese <sr@denx.de>
43569 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
43570 Author: Stefan Roese <sr@denx.de>
43571 Date: Sat Dec 22 12:20:09 2007 +0100
43573 ppc4xx: Move virtual address of POST cache test to bigger address
43575 On Sequoia & LWMON5 the virtual address of the POST cache test is now
43576 moved to a bigger address. This enables usage of more memory on those
43579 Signed-off-by: Stefan Roese <sr@denx.de>
43581 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
43582 Author: Stefan Roese <sr@denx.de>
43583 Date: Sat Dec 22 12:18:26 2007 +0100
43585 ppc4xx: Fix problem in 44x cache POST routine
43587 As repoted by Larry Johnson, running "diag run cache" caused a crash
43588 in U-Boot. This problem was introduced by a patch that removed the
43589 TLB entry for the cache test after the test has completed. Since this
43590 TLB was only setup once, a 2nd attempt to run this cache test
43591 failed with a crash. Now this TLB entry is created every time the
43594 Signed-off-by: Stefan Roese <sr@denx.de>
43596 commit b0265b576bb8fa9465f99e99c323768b562fadc2
43597 Author: Stefan Roese <sr@denx.de>
43598 Date: Fri Dec 21 07:51:29 2007 +0100
43600 ppc4xx: Update Makalu fdt support
43602 Signed-off-by: Stefan Roese <sr@denx.de>
43604 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
43605 Author: Stefan Roese <sr@denx.de>
43606 Date: Wed Dec 19 09:05:40 2007 +0100
43608 ppc4xx: Add fdt support to AMCC Katmai eval board
43610 Signed-off-by: Stefan Roese <sr@denx.de>
43612 commit 328a340392a5df9aaf00792be989df73e750859e
43613 Author: Stefan Roese <sr@denx.de>
43614 Date: Tue Dec 18 08:44:51 2007 +0100
43616 ppc4xx: fdt: Cleanup setup of cpu node setup
43618 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
43619 without using the absolute path to the cpu node. This makes it possible
43620 to use this U-Boot version with both versions of cpu-node naming
43621 "cpu@0" and the former "PowerPC,440EPx@0".
43623 Signed-off-by: Stefan Roese <sr@denx.de>
43625 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
43626 Author: Stefan Roese <sr@denx.de>
43627 Date: Mon Dec 17 17:26:21 2007 +0100
43629 ppc4xx: Fix lwmon5 compilation problem
43631 Now that the 440EPx ECC test is not board specific anymore
43632 remove this Makefile.
43634 Signed-off-by: Stefan Roese <sr@denx.de>
43636 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
43637 Author: Anatolij Gustschin <agustschin@t-online.de>
43638 Date: Wed Dec 5 17:43:20 2007 +0100
43640 Fix ppc4xx clear_bss() code
43642 ppc4xx clear_bss() fails if BSS segment size is not
43643 divisible by 4 without remainder. This patch provides
43644 fix for this problem.
43646 Signed-off-by: Anatolij Gustschin <agust@denx.de>
43648 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
43649 Author: Niklaus Giger <niklausgiger@gmx.ch>
43650 Date: Fri Nov 30 18:35:11 2007 +0100
43652 PPC4xx: Minimal changes to add vxWorks support
43654 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
43656 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
43657 Author: Markus Klotzbücher <mk@denx.de>
43658 Date: Fri Nov 23 13:09:18 2007 +0100
43660 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
43662 When using dhcp/bootp the "netmask" environment variable is not
43663 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
43664 desireable, so the following patch adds this this option to the board
43667 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
43668 Signed-off-by: Stefan Roese <sr@denx.de>
43670 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
43671 Author: Larry Johnson <lrj@arlinx.com>
43672 Date: Sat Oct 27 12:48:15 2007 -0400
43674 Fix/enhance ECC POST for 440EPx/GRx
43676 This patch allows the ECC POST to be used for different boards with the
43677 PPC440 Denali SDRAM controller. Modifications include skipping the test
43678 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
43679 to prevent timing errors.
43681 Signed-off-by: Larry Johnson <lrj@acm.org>
43683 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
43684 Author: Larry Johnson <lrj@arlinx.com>
43685 Date: Sat Oct 27 12:48:05 2007 -0400
43687 PPC4xx: Move/rename ECC POST for 440EPx/GRx
43689 Signed-off-by: Larry Johnson <lrj@acm.org>
43691 commit c29d2d3680046d430022c55e50fcb27f5866517e
43692 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43693 Date: Fri Dec 14 11:20:33 2007 +0100
43695 ppc4xx: use correct io accessors for 4xx ethernet POST
43697 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43699 commit ba79fde58a48c0a6ff8e2a96caba951594142203
43700 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43701 Date: Fri Dec 14 11:19:56 2007 +0100
43703 ppc4xx: fix flush + invalidate_dcache_range arguments
43705 flush + invalidate_dcache_range() expect the start and stop+1 address.
43706 So the stop address is the first address behind (!) the range.
43708 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43710 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
43711 Author: Stefan Roese <sr@denx.de>
43712 Date: Fri Dec 14 08:41:29 2007 +0100
43714 ppc4xx: fdt: use fdt_fixup_ethernet()
43716 By using aliases in the dts file, the ethernet node fixup is
43717 much easier with the recently added functions.
43719 Please note that the dts file needs the aliases for this to work.
43721 Signed-off-by: Stefan Roese <sr@denx.de>
43723 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
43724 Author: Stefan Roese <sr@denx.de>
43725 Date: Thu Dec 13 14:52:53 2007 +0100
43727 ppc4xx: Bring 4xx fdt support up-to-date
43729 This patch update the 4xx fdt support. It enabled fdt booting
43730 on the AMCC Kilauea and Sequoia for now. More can follow later
43733 Signed-off-by: Stefan Roese <sr@denx.de>
43735 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
43736 Author: Stefan Roese <sr@denx.de>
43737 Date: Thu Dec 27 07:50:54 2007 +0100
43739 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
43741 The check for an sufficiently erased destination was missing in the
43742 buffered write function of the cfi flash driver (when
43743 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
43744 writing to such a region will fail with the currect error message.
43746 Signed-off-by: Stefan Roese <sr@denx.de>
43748 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
43749 Author: Martin Krause <martin.krause@tqs.de>
43750 Date: Mon Nov 12 10:56:17 2007 +0100
43752 Some configuration updates for the TQM5200 based TB5200 board:
43754 - enable command line history
43755 - increase malloc space (because of bigger flash sectors)
43757 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43759 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
43760 Author: Martin Krause <martin.krause@tqs.de>
43761 Date: Thu Sep 27 11:10:08 2007 +0200
43763 TQM8xx: use the CFI flash driver on all TQM8xx boards
43765 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43767 commit 11d9eec479b470eab9242ab937fca70a876d9376
43768 Author: Martin Krause <martin.krause@tqs.de>
43769 Date: Wed Sep 26 17:55:56 2007 +0200
43771 TQM885D: adjust for doubled flash sector size + some minor fixes
43773 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43775 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
43776 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
43777 Date: Wed Sep 26 17:55:54 2007 +0200
43779 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
43781 CAS-Latency=2, Write Recovery Time tWR=2
43782 The max. supported bus frequency is 66 MHz. Therefore, changed
43783 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
43785 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43787 commit b988b8cd443989be65161888eea0127ad03f846f
43788 Author: Martin Krause <martin.krause@tqs.de>
43789 Date: Wed Sep 26 17:55:56 2007 +0200
43791 TQM885D: use calculated cpuclk instead of measuring it
43793 On the TQM885D the measurement of cpuclk with the PIT reference
43794 timer ist not necessary. Since all module variants use the same
43795 external 10 MHz oscillator, the cpuclk only depends on the PLL
43796 configuration - which is readable by software.
43798 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43800 commit 492c7049869348d31168de8dad89651315e468e0
43801 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
43802 Date: Thu Sep 27 14:54:46 2007 +0200
43804 TQM885D: fix SDRAM refresh
43806 At 133 MHz the current SDRAM refresh rate is too fast
43807 (measured 4 * 1.17 us).
43808 CFG_MAMR_PTA changes from 39 to 128. This result
43809 in a refresh rate of 4 * 7.8 us at the default clock
43810 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
43811 This is a compromise until a new method is found to
43812 adjust the refresh rate.
43814 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43816 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
43817 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
43818 Date: Thu Sep 27 14:54:46 2007 +0200
43820 TQM860M: Support for 10col SDRAMs, max. 128 MiB
43822 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43824 commit 61fb15c516fef5631e305f1976d7b3a679725856
43825 Author: Wolfgang Denk <wd@denx.de>
43826 Date: Thu Dec 27 01:52:50 2007 +0100
43828 Fix coding style issues; update CHANGELOG.
43830 Signed-off-by: Wolfgang Denk <wd@denx.de>
43832 commit 467bcee11fe26ad422f2de971aa70866079870f2
43833 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43834 Date: Fri Dec 14 15:36:18 2007 +0100
43836 cfi_flash: Add manufacturer-specific fixups
43838 Run fixups based on the JEDEC manufacturer ID independent of the
43841 This changes current behaviour: Previously, geometry reversal for AMD
43842 chips were done based on the command set ID, while they are now done
43843 based on the JEDEC manufacturer and device ID.
43845 Also add fixup for top-boot Atmel chips. A fixup is needed for
43846 AT49BV6416(T) too, but since u-boot currently only reads the low byte
43847 of the device ID, there's no way to tell it apart from AT49BV642D,
43848 which should not have this fixup. Since AT49BV642D support is
43849 necessary to get ATNGW100 board support into mainline, I've commented
43850 out the fixup for now.
43852 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43854 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
43855 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43856 Date: Fri Dec 14 15:36:17 2007 +0100
43858 cfi_flash: Add cmdset-specific init functions
43860 Move things like reading JEDEC IDs and fixing up geometry reversal
43861 into separate functions. The geometry reversal fixup is now performed
43862 by altering the qry structure directly, which makes the sector init
43863 code slightly cleaner.
43865 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43867 commit e23741f4a6d8047520ef0d4971762749b3587d32
43868 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43869 Date: Fri Dec 14 15:36:16 2007 +0100
43871 cfi_flash: Read whole QRY structure in one go
43873 Read out the whole CFI Standard Query structure after successful cfi
43874 identification. This allows subsequent code to access this information
43875 directly without having to go through flash_read_uchar() and friends.
43877 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43879 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
43880 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43881 Date: Mon Dec 17 11:02:44 2007 +0100
43883 AVR32: Fix logic inversion in disable_interrupts()
43885 disable_interrupts() should return nonzero if interrupts were
43886 _enabled_ before, not disabled.
43888 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43890 commit acac475212cbedb17b321a363a1c878e2b47b37f
43891 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43892 Date: Fri Dec 14 16:51:22 2007 +0100
43894 AVR32: Enable interrupts at bootup
43896 The timer code depends on the timer interrupt to keep track of the
43897 upper 32 bits of the cycle counter. This obviously doesn't work when
43898 interrupts are disabled the whole time.
43900 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43902 commit 9570bcd87f4db255514f43b6701746c412f8fef0
43903 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43904 Date: Thu Nov 15 10:03:45 2007 +0100
43906 AVR32: Fix wrong pin setup for USART3
43908 As reported by Gerhard Berghofer:
43910 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
43911 instead of PB18 and PB19.
43913 which is obviously correct. There's currently no code that uses
43914 USART3, but custom boards may run into problems.
43916 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43918 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
43919 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43920 Date: Thu Nov 1 12:44:20 2007 +0100
43922 README: Remove ATSTK1000 daughterboard list
43924 As noted by Kim Phillips, these lists tend to become out of date.
43926 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43928 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
43929 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43930 Date: Tue Oct 30 14:56:36 2007 +0100
43932 Add ATSTK100[234] to MAINTAINERS
43934 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
43935 "mother". Also update the entry for ATSTK1000 to be not only about the
43936 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
43938 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43940 commit 64ff2357b1727213803591813dbc779c924bf772
43941 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43942 Date: Mon Oct 29 13:02:54 2007 +0100
43944 AVR32: Add support for the ATSTK1004 board
43946 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
43947 which is a derivative of AT32AP7000.
43949 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43951 commit 667568db157f374b85abd7e03596ddd1f0b25681
43952 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43953 Date: Mon Oct 29 13:02:54 2007 +0100
43955 AVR32: Add support for the ATSTK1003 board
43957 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
43958 which is a derivative of AT32AP7000.
43960 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43962 commit 5fee84a794a51ec830548cda485a770efb018b92
43963 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43964 Date: Mon Oct 29 13:23:33 2007 +0100
43966 AVR32: Make some AT32AP700x peripherals optional
43968 Add a chip-features file providing definitions of the form
43970 AT32AP700x_CHIP_HAS_<peripheral>
43972 to indicate the availability of the given peripheral on the currently
43975 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43977 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
43978 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43979 Date: Mon Oct 29 13:09:56 2007 +0100
43981 AVR32: Rename at32ap7000 -> at32ap700x
43983 The SoC-specific code for all the AT32AP700x CPUs is practically
43984 identical; the only difference is that some chips have less features
43985 than others. By doing this rename, we can add support for the AP7000
43986 derivatives simply by making some features conditional.
43988 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43990 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
43991 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43992 Date: Fri Jun 29 18:22:34 2007 +0200
43994 atmel_mci: Show SR when block read fails
43996 Show controller status as well as card status when an error occurs
43999 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44001 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
44002 Author: Stefan Roese <sr@denx.de>
44003 Date: Thu Dec 13 14:52:53 2007 +0100
44005 ppc4xx: Bring 4xx fdt support up-to-date
44007 This patch update the 4xx fdt support. It enabled fdt booting
44008 on the AMCC Kilauea and Sequoia for now. More can follow later
44011 Signed-off-by: Stefan Roese <sr@denx.de>
44013 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
44014 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44015 Date: Thu Dec 13 12:56:34 2007 +0100
44017 cfi_flash: Use map_physmem() and unmap_physmem()
44019 Use map_physmem() and unmap_physmem() to convert from physical to
44020 virtual addresses. This gives the arch a chance to provide an uncached
44021 mapping for flash accesses.
44023 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44025 commit 4d7d6936eb29af7cca330937808312aa5f61454d
44026 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44027 Date: Thu Dec 13 12:56:33 2007 +0100
44029 Introduce map_physmem() and unmap_physmem()
44031 map_physmem() returns a virtual address which can be used to access a
44032 given physical address without involving the cache. unmap_physmem()
44033 should be called when the virtual address returned by map_physmem() is
44036 This patch adds a stub implementation which simply returns the
44037 physical address cast to a uchar * for all architectures except AVR32,
44038 which converts the physical address to an uncached virtual mapping.
44039 unmap_physmem() is a no-op on all architectures, but if any
44040 architecture needs to do such mappings through the TLB, this is the
44041 hook where those TLB entries can be invalidated.
44043 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44045 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
44046 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44047 Date: Thu Dec 13 12:56:32 2007 +0100
44049 cfi_flash: Introduce read and write accessors
44051 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
44052 them to access the flash memory. This makes it clearer when the flash
44053 is actually being accessed; merely dereferencing a volatile pointer
44054 looks just like any other kind of access.
44056 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44058 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
44059 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44060 Date: Thu Dec 13 12:56:31 2007 +0100
44062 Implement __raw_{read,write}[bwl] on all architectures
44064 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
44065 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
44068 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44070 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
44071 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44072 Date: Sat Oct 6 18:55:36 2007 +0200
44074 cfi_flash: Reorder functions and eliminate extra prototypes
44076 Reorder the functions in cfi_flash.c so that each function only uses
44077 functions that have been defined before it. This allows the static
44078 prototype declarations near the top to be eliminated and might allow
44079 gcc to do a better job inlining functions.
44081 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44083 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
44084 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44085 Date: Thu Dec 13 12:56:29 2007 +0100
44087 cfi_flash: Make some needlessly global functions static
44089 Make functions not declared in any header file static.
44091 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44093 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
44094 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44095 Date: Thu Dec 13 12:56:28 2007 +0100
44097 cfi_flash: Break long lines
44099 This patch tries to keep all lines in the cfi_flash driver below 80
44100 columns. There are a few lines left which don't fit this requirement
44101 because I couldn't find any trivial way to break them (i.e. it would
44102 take some restructuring, which I intend to do in a later patch.)
44104 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44106 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
44107 Author: Bartlomiej Sieka <tur@semihalf.com>
44108 Date: Tue Dec 11 13:59:57 2007 +0100
44110 CFI: synchronize command offsets with Linux CFI driver
44112 Fixes non-working CFI Flash on the Inka4x0 board.
44114 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
44116 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
44117 Author: Kumar Gala <galak@kernel.crashing.org>
44118 Date: Fri Dec 7 12:17:34 2007 -0600
44120 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
44122 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
44123 (MPC8544DS, MPC8548CDS, MPC8568MDS).
44125 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44127 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
44128 Author: Kumar Gala <galak@kernel.crashing.org>
44129 Date: Fri Dec 7 12:04:30 2007 -0600
44131 Update Freescale MPC85xx ADS/CDS/MDS board config
44133 * Enabled CONFIG_CMD_ELF
44135 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44137 commit d435793229ce29a42797c1edc39f5b34f987f91a
44138 Author: Kumar Gala <galak@kernel.crashing.org>
44139 Date: Fri Dec 7 04:59:26 2007 -0600
44141 Handle Asynchronous DDR clock on 85xx
44143 The MPC8572 introduces the concept of an asynchronous DDR clock with
44144 regards to the platform clock.
44146 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
44149 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44151 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
44152 Author: Kumar Gala <galak@kernel.crashing.org>
44153 Date: Thu Nov 29 10:34:28 2007 -0600
44155 Update Freescale MPC85xx ADS/CDS/MDS board config
44157 * Removed some misc environment setup
44158 * Enabled CONFIG_CMDLINE_EDITING
44160 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44162 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
44163 Author: Kumar Gala <galak@kernel.crashing.org>
44164 Date: Thu Nov 29 10:47:44 2007 -0600
44166 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
44168 Minor path corrections needed to ensure buildability.
44170 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44172 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
44173 Author: Kumar Gala <galak@kernel.crashing.org>
44174 Date: Thu Nov 29 10:16:18 2007 -0600
44176 Move the MPC8540 ADS board under board/freescale.
44178 Minor path corrections needed to ensure buildability.
44180 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44182 commit 870ceac5b3a3486c109396e005af81ae762b5710
44183 Author: Kumar Gala <galak@kernel.crashing.org>
44184 Date: Thu Nov 29 10:14:50 2007 -0600
44186 Move the MPC8560 ADS board under board/freescale.
44188 Minor path corrections needed to ensure buildability.
44190 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44192 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
44193 Author: Kumar Gala <galak@kernel.crashing.org>
44194 Date: Thu Nov 29 10:13:47 2007 -0600
44196 Move the MPC8568 MDS board under board/freescale.
44198 Minor path corrections needed to ensure buildability.
44200 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44202 commit a853d56c59b33415304531443633808736acfc6e
44203 Author: Kumar Gala <galak@kernel.crashing.org>
44204 Date: Thu Nov 29 02:18:59 2007 -0600
44206 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
44208 We already had defines for LAWAR_TRGT_IF_* that we should use
44209 rather than creating new ones. Also, added some missing defines for
44212 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44214 commit 04db400892da37b76a585e332a0c137954ad2015
44215 Author: Kumar Gala <galak@kernel.crashing.org>
44216 Date: Thu Nov 29 02:10:09 2007 -0600
44218 Stop using immap_t on 85xx
44220 In the future the offsets to various blocks may not be in same location.
44221 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
44222 instead of getting it via &immap.
44224 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44226 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
44227 Author: Kumar Gala <galak@kernel.crashing.org>
44228 Date: Thu Nov 29 01:23:09 2007 -0600
44230 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
44232 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44234 commit c480861bf000156e6a3e932c258db59ff2212dd3
44235 Author: Kumar Gala <galak@kernel.crashing.org>
44236 Date: Thu Nov 29 01:06:19 2007 -0600
44238 Update MPC8568 MDS to use libfdt
44240 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
44241 ethernet, pci, and serial for the various fixups that are done.
44243 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44245 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
44246 Author: Haiying Wang <Haiying.Wang@freescale.com>
44247 Date: Wed Nov 14 15:52:06 2007 -0500
44249 Add PCI Express support on MPC8568MDS
44251 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
44252 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44254 commit b90d25497625b90ffa3f2911a0895ca237556ff5
44255 Author: Kumar Gala <galak@kernel.crashing.org>
44256 Date: Thu Nov 29 00:11:44 2007 -0600
44258 Update MPC85xx CDS to use libfdt
44260 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
44261 ethernet, pci, and serial for the various fixups that are done.
44263 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44265 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
44266 Author: Kumar Gala <galak@kernel.crashing.org>
44267 Date: Wed Nov 28 22:54:27 2007 -0600
44269 Update MPC8540 ADS to use libfdt
44271 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
44272 ethernet, pci, and serial for the various fixups that are done.
44274 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44276 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
44277 Author: Kumar Gala <galak@kernel.crashing.org>
44278 Date: Wed Nov 28 22:40:31 2007 -0600
44280 Update MPC8560 ADS to use libfdt
44282 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
44283 ethernet, pci, and serial for the various fixups that are done.
44285 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44287 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
44288 Author: Kumar Gala <galak@kernel.crashing.org>
44289 Date: Wed Nov 28 00:36:33 2007 -0600
44291 Stop using immap_t for cpm offset on 85xx
44293 In the future the offsets to various blocks may not be in same location.
44294 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
44295 instead of getting it via &immap->im_cpm.
44297 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44299 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
44300 Author: Kumar Gala <galak@kernel.crashing.org>
44301 Date: Tue Nov 27 23:25:02 2007 -0600
44303 Stop using immap_t for guts offset on 85xx
44305 In the future the offsets to various blocks may not be in same location.
44306 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
44307 instead of getting it via &immap->im_gur.
44309 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44311 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
44312 Author: Kumar Gala <galak@kernel.crashing.org>
44313 Date: Tue Nov 27 22:42:34 2007 -0600
44315 Update MPC8544 DS config
44317 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
44318 * Removed some misc environment setup
44319 * Moved to using fdtfile & fdtaddr as fdt env var names
44320 * Enabled CONFIG_CMDLINE_EDITING
44322 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44324 commit addce57e2e4c49e77ffb2020a84690713bb18b47
44325 Author: Kumar Gala <galak@kernel.crashing.org>
44326 Date: Mon Nov 26 17:12:24 2007 -0600
44328 Update MPC8544DS to use libfdt
44330 Updated the MPC8544DS config to use libfdt and assume use of aliases for
44331 ethernet, pci, and serial for the various fixups that are done.
44333 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44335 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
44336 Author: Kumar Gala <galak@kernel.crashing.org>
44337 Date: Thu Nov 29 00:15:30 2007 -0600
44339 Add libfdt based ft_cpu_setup for mpc85xx
44341 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44343 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
44344 Author: Stefan Roese <sr@denx.de>
44345 Date: Tue Dec 11 13:38:19 2007 +0100
44347 ppc4xx: Correct GPIO offset in gpio_config()
44349 Thanks to Gary Jennejohn for pointing this out.
44351 Signed-off-by: Stefan Roese <sr@denx.de>
44353 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
44354 Author: Stefan Roese <sr@denx.de>
44355 Date: Tue Dec 11 11:46:01 2007 +0100
44357 rtc: Fix merging problem
44359 Signed-off-by: Stefan Roese <sr@denx.de>
44361 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
44362 Author: Stefan Roese <sr@denx.de>
44363 Date: Sat Dec 8 14:47:34 2007 +0100
44365 ppc4xx: 405EX: Correctly enable USB pins
44367 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
44368 function control) registers. This is done for the AMCC Kilauea and
44369 Makalu eval boards.
44371 Signed-off-by: Stefan Roese <sr@denx.de>
44373 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
44374 Author: Stefan Roese <sr@denx.de>
44375 Date: Sat Dec 8 08:25:09 2007 +0100
44377 CFI: Coding style cleanup
44379 Signed-off-by: Stefan Roese <sr@denx.de>
44381 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
44382 Author: Michael Schwingen <michael@schwingen.org>
44383 Date: Fri Dec 7 23:35:02 2007 +0100
44385 CFI: support JEDEC flash roms in CFI-flash framework
44387 The following patch adds support for non-CFI flash ROMS, by hooking into the
44388 CFI flash code and using most of its code, as recently discussed here in the
44389 thread "Mixing CFI and non-CFI flashs".
44391 Signed-off-by: Michael Schwingen <michael@schwingen.org>
44392 Signed-off-by: Stefan Roese <sr@denx.de>
44394 commit c01b17dd856fa120b2970f50d9598546a4927ec3
44395 Author: Gerald Van Baren <vanbaren@cideas.com>
44396 Date: Wed Nov 28 21:24:50 2007 -0500
44398 Conditionally compile fdt_fixup_ethernet()
44400 Fix compiler warnings: On boards that don't have ethernets defined,
44401 don't compile fdt_fixup_ethernet().
44403 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
44404 Author: Kumar Gala <galak@kernel.crashing.org>
44405 Date: Tue Nov 27 21:59:46 2007 -0600
44407 Convert boards that set memory node to use fdt_fixup_memory()
44409 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44411 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
44412 Author: Kumar Gala <galak@kernel.crashing.org>
44413 Date: Mon Nov 26 17:06:15 2007 -0600
44415 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
44417 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
44418 determine which serial alias we should set linux,stdout-path to.
44420 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44422 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
44423 Author: Kumar Gala <galak@kernel.crashing.org>
44424 Date: Mon Nov 26 14:57:45 2007 -0600
44426 Add common memory fixup function
44428 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
44430 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44432 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
44433 Author: Kumar Gala <galak@kernel.crashing.org>
44434 Date: Mon Nov 26 11:19:12 2007 -0600
44436 Conditionally compile fdt_support.c
44438 Modify common/Makefile to conditionally compile fdt_support.c based
44439 on CONFIG_OF_LIBFDT.
44441 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44443 commit d88e7ba0980773479e1a64badb293116071b7ef0
44444 Author: Kumar Gala <galak@kernel.crashing.org>
44445 Date: Mon Nov 26 10:41:40 2007 -0600
44447 Fix build breakage due to libfdt import
44449 The IDS8247 got lost in the update and need an API update
44450 do to rename of functions in libfdt.
44452 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44454 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
44455 Author: Gerald Van Baren <vanbaren@cideas.com>
44456 Date: Fri Nov 23 19:43:20 2007 -0500
44458 Add spaces around the = in the fdt print format.
44460 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44462 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
44463 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44464 Date: Fri Dec 7 01:25:38 2007 +0900
44466 sh: Moved driver of the SuperH dependence
44468 The composition of the directory in the drivers/ changed.
44469 I moved SuperH serial driver and marubun PCMCIA driver.
44471 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44473 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
44474 Author: Wolfgang Denk <wd@denx.de>
44475 Date: Thu Dec 6 10:21:19 2007 +0100
44479 Signed-off-by: Wolfgang Denk <wd@denx.de>
44481 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
44482 Author: Wolfgang Denk <wd@denx.de>
44483 Date: Thu Dec 6 10:21:03 2007 +0100
44485 ADS5121 Board: fix compile problem.
44487 Signed-off-by: Wolfgang Denk <wd@denx.de>
44489 commit a27044b14a9e93678a82d7b35f202b93e7687abc
44490 Author: Stefan Roese <sr@denx.de>
44491 Date: Thu Dec 6 05:58:43 2007 +0100
44493 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
44495 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
44496 setting the FIXD bit in the SDR0_MFR register. Here a description of the
44499 Problem Description
44500 ------------------------------
44501 If a DMA is performed between memory and PCI with the DMA 1 Controller
44502 using prefetch, and as a result uses a special purpose buffer selected by
44503 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
44504 the first part of the transfer sequence is performed twice. The
44505 PPC440SPe PCI Controller requests more data than was needed such that in
44506 the case of enforce memory protection, a host CPU exception can occur.
44507 No data is corrupted, because data transfer is stopped in the PCI
44508 Controller. Prefetch enable is specified by setting DMA Configuration
44509 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
44511 Behavior that may be observed in a running system
44512 ---------------------------------------------------------------------------
44514 1. DMA performance is decreased because of the double access on the PCI bus
44516 2. If an illegal access to some address on the PCI bus is detected at the
44517 system level, a machine check or similar system error may occur.
44519 Workarounds Available
44520 ----------------------------------
44522 1. Do not program prefetch. Note that a prefetch command cannot be programmed
44523 without selecting a special purpose buffer.
44524 2. To avoid crossing a physical boundary of the PCI slave device, add 512
44525 bytes of address to the PCI address range.
44527 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
44528 from AMCC and slighly changed.
44530 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
44531 Signed-off-by: Stefan Roese <sr@denx.de>
44533 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
44534 Author: Stefan Roese <sr@denx.de>
44535 Date: Tue Dec 4 16:29:48 2007 +0100
44537 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
44539 Signed-off-by: Stefan Roese <sr@denx.de>
44541 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
44542 Author: Wolfgang Denk <wd@denx.de>
44543 Date: Mon Dec 3 00:15:28 2007 +0100
44545 Prepare for 1.3.1-rc1
44547 Signed-off-by: Wolfgang Denk <wd@denx.de>
44549 commit e15e33433e7c05111968dc9b434a52fd42cbd221
44550 Author: Stefan Roese <sr@denx.de>
44551 Date: Fri Nov 30 07:15:41 2007 +0100
44553 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
44555 This manual PCIe reset triggering solves the problem seen with the
44556 Intel EPRO/1000 card, which was not detected (link not established)
44557 upon power-up reset.
44559 Signed-off-by: Stefan Roese <sr@denx.de>
44561 commit 260eea5676ca46903a335686cc020b29c4ca46fe
44562 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44563 Date: Thu Nov 29 01:21:54 2007 +0900
44565 sh: Add SuperH boards maintainer to MAINTAINERS file
44567 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
44569 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44571 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
44572 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44573 Date: Thu Nov 29 00:13:04 2007 +0900
44575 sh: Add ms7750se support in MAKEALL
44577 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44579 commit c7144373427a178332bf9754131c8c34c52c200a
44580 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44581 Date: Tue Nov 27 09:44:53 2007 +0100
44583 sh: Add sh3 and sh4 support in MAKEALL
44585 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44586 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44588 commit 130080874a3d28450098481a262c5f7c855e908d
44589 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44590 Date: Sun Nov 25 02:51:17 2007 +0900
44592 sh: Add document for SuperH.
44594 This document is a summary of information concerning SuperH of U-Boot.
44596 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44598 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
44599 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44600 Date: Sun Nov 25 02:39:31 2007 +0900
44602 sh: Add marubun's pcmcia driver
44604 Marubun pcmcia is a chip for PCMCIA used with SuperH.
44605 Of course, this can be used even by other architectures.
44606 When use this driver, came to be able to use CompactFlash
44609 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44611 commit febd86b969b975289ed948f1ac0eb9722da41ced
44612 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44613 Date: Sun Nov 25 02:32:13 2007 +0900
44615 sh: Update SuperH SCIF driver
44617 - Changed volatile unsigned to vu_.
44618 - Changed Makefile for kconfig.
44620 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
44622 commit 8be760903645af09871be50ad0a6f9ebb62b311d
44623 Author: Stefan Roese <sr@denx.de>
44624 Date: Tue Nov 27 11:57:35 2007 +0100
44626 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
44628 After an error in the AMCC 405EX users manual now correctly configure
44629 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
44632 Signed-off-by: Stefan Roese <sr@denx.de>
44634 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
44635 Author: Wolfgang Denk <wd@denx.de>
44636 Date: Mon Nov 26 19:18:21 2007 +0100
44638 Cleanup coding style; update CHANGELOG
44640 Signed-off-by: Wolfgang Denk <wd@denx.de>
44642 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
44643 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44644 Date: Sun Nov 25 22:39:25 2007 +0100
44646 MAKEALL: add missing 512x boards in ppc
44648 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44650 commit a340c325e668ca7386c2276387681720be9c3757
44651 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44652 Date: Sun Nov 25 18:45:47 2007 +0100
44654 Makefile : fix tags ctags etags with new drivers organization
44656 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44658 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
44659 Author: Stefan Roese <sr@denx.de>
44660 Date: Mon Nov 26 15:06:14 2007 +0100
44662 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
44664 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
44667 Signed-off-by: Stefan Roese <sr@denx.de>
44669 commit ca1ce226287270bb01e25b8e3674c701f12edf19
44670 Author: Stefan Roese <sr@denx.de>
44671 Date: Mon Nov 26 15:01:45 2007 +0100
44673 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
44675 Signed-off-by: Stefan Roese <sr@denx.de>
44677 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
44678 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44679 Date: Sun Nov 25 18:45:47 2007 +0100
44681 Makefile : fix tags ctags etags with new drivers organization
44683 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44685 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
44686 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44687 Date: Sat Nov 24 21:26:56 2007 +0100
44689 drivers/mtd : move mtd drivers to drivers/mtd
44691 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44693 commit 318c0b90431f2648552e5ade78833f42652ce859
44694 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44695 Date: Sat Nov 24 21:17:55 2007 +0100
44697 drivers/misc : move misc drivers to drivers/misc
44699 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44701 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
44702 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44703 Date: Sat Nov 24 21:13:59 2007 +0100
44705 drivers/block : move block drivers to drivers/block
44707 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44709 commit 0c698dcaa70275eb8814f665b545547cee013892
44710 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44711 Date: Sat Nov 24 20:59:50 2007 +0100
44713 drivers/rtc : move rtc drivers to drivers/rtc
44715 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44717 commit f868cc5a50757d94f36c312395481cb0f187d9e6
44718 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44719 Date: Sat Nov 24 20:14:44 2007 +0100
44721 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
44723 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44725 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
44726 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44727 Date: Sat Nov 24 19:46:45 2007 +0100
44729 drivers/input : move input drivers to drivers/input
44731 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44733 commit e4558666293364fc3af1c1d9381ca933fa0f1275
44734 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44735 Date: Sat Nov 24 19:40:11 2007 +0100
44737 drivers/usb : move usb drivers to drivers/usb
44739 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44741 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
44742 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44743 Date: Sat Nov 24 19:33:38 2007 +0100
44745 drivers/serial : move serial drivers to drivers/serial
44747 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44749 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
44750 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44751 Date: Wed Nov 21 21:19:24 2007 +0100
44753 drivers/net : move net drivers to drivers/net
44755 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44757 commit 352d259130b349fe9593b8dada641bd78a9659e5
44758 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44759 Date: Tue Nov 20 20:41:48 2007 +0100
44761 drivers/video : move video drivers to drivers/video
44763 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44765 commit 73646217186aa17afc8e305c5f06f06dd335eaad
44766 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44767 Date: Tue Nov 20 20:33:09 2007 +0100
44769 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
44771 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44773 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
44774 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44775 Date: Tue Nov 20 20:28:09 2007 +0100
44777 drivers/pci : move pci drivers to drivers/pci
44779 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44781 commit 9162352817579840d7802da6d85872b3ca003c97
44782 Author: Gerald Van Baren <vanbaren@cideas.com>
44783 Date: Thu Nov 22 17:23:23 2007 -0500
44785 Fix fdt printing for updated libfdt
44787 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
44789 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
44791 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
44792 Author: Kumar Gala <galak@kernel.crashing.org>
44793 Date: Wed Nov 21 13:30:15 2007 -0600
44795 Add additional fdt fixup helper functions
44797 Added the following fdt fixup helpers:
44798 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
44799 * do_fixup_by_compat{_u32} - Find matching nodes by compat
44801 The _u32 variants work the same only the property they are setting
44802 is know to be a 32-bit integer instead of a byte buffer.
44804 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44806 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
44807 Author: Kumar Gala <galak@kernel.crashing.org>
44808 Date: Wed Nov 21 11:11:03 2007 -0600
44810 Add fdt_fixup_ethernet helper to set mac addresses
44812 Added a fixup helper that uses aliases to set mac addresses
44813 in the device tree based on the bd_t
44815 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44817 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
44818 Author: Kumar Gala <galak@kernel.crashing.org>
44819 Date: Wed Nov 21 14:07:46 2007 -0600
44821 Fix warnings from import of libfdt
44823 cmd_fdt.c: In function fdt_print:
44824 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
44825 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
44826 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
44827 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
44829 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44831 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
44832 Author: Kumar Gala <galak@kernel.crashing.org>
44833 Date: Wed Oct 24 11:04:22 2007 -0500
44835 Update libfdt from device tree compiler (dtc)
44837 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
44838 the device tree compiler (dtc) project.
44840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44842 commit e93becf80d732b64aef81b23e8b6ece02c40533d
44843 Author: Kumar Gala <galak@kernel.crashing.org>
44844 Date: Sat Nov 3 19:46:28 2007 -0500
44846 Move do_fixup* for libfdt into common code
44848 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
44849 into common/fdt_support.c and renamed:
44851 do_fixup() -> do_fixup_by_path()
44852 do_fixup_u32() -> do_fixup_by_path_u32()
44854 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44856 commit f738b4a75998f42a7408defadc9baac7a31c92db
44857 Author: Kumar Gala <galak@kernel.crashing.org>
44858 Date: Thu Oct 25 16:15:07 2007 -0500
44860 Make no options to fdt print default to '/'
44862 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44864 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
44865 Author: Kumar Gala <galak@kernel.crashing.org>
44866 Date: Wed Oct 24 10:21:57 2007 -0500
44868 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
44871 fdt_node_is_compatible
44872 fdt_find_node_by_type
44873 fdt_find_compatible_node
44875 To ease merge of newer libfdt as we aren't using them anywhere at this time.
44877 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
44880 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44882 commit 98e2867cc85409b919f862e6c16026461ec955df
44883 Author: Grant Likely <grant.likely@secretlab.ca>
44884 Date: Wed Nov 21 09:19:37 2007 -0700
44886 [BUILD] Remove libraries when updating autoconf.mk
44888 Fix library problems caused by conditional compilation. Using
44889 autoconf.mk to decide which files to compile has caused a problem when
44890 changing configuration from one board to another without clearing out
44891 the library (*.a) files.
44893 It used to be that the linker was always passed the same list of .o
44894 files when building the .a files. However, that is not longer true
44895 with conditional compilation. Now, a different board config will have
44896 a different file list passed to the linker. The problem occurs when
44897 a library has already been built and the board config is changed.
44899 Since the linker will update instead of replace a preexisting library,
44900 then if the file list changes to remove some object files the old
44901 objects will still exist in the library.
44903 The solution is to remove all old library files when autoconf.mk is
44906 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44908 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
44909 Author: Kumar Gala <galak@kernel.crashing.org>
44910 Date: Wed Nov 21 08:49:50 2007 -0600
44912 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
44914 Modify libfdt/Makefile to conditionally compile the *.c files based
44915 on the board config.
44917 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44919 commit 4a43719a7738712811d822ca8125427b27a55cdc
44920 Author: Grant Likely <grant.likely@secretlab.ca>
44921 Date: Mon Sep 24 09:05:31 2007 -0600
44923 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
44925 Modify common/Makefile to conditionally compile the cmd_*.c files based
44926 on the board config.
44928 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44930 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
44931 Author: Grant Likely <grant.likely@secretlab.ca>
44932 Date: Mon Sep 24 09:05:31 2007 -0600
44934 [BUILD] Generate include/autoconf.mk from board config files
44936 Use cpp and sed to postprocess config.h and import the defined values
44937 into include/autoconf.mk. autoconf.mk is then included by config.mk to
44938 give 'make' access to the board configuration.
44940 Doing this enables conditional compilation at the Makefile level instead
44941 of by wrapping every .c file with #ifdef/#endif wrappers.
44943 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44945 commit 68b88999da87ab88e71e1306192905be3450198e
44946 Author: Jon Loeliger <jdl@freescale.com>
44947 Date: Tue Nov 20 15:02:26 2007 -0600
44949 8610HPCD: Enable the 8610 Display Interface Unit
44951 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44953 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
44954 Author: Jon Loeliger <jdl@freescale.com>
44955 Date: Tue Nov 20 15:00:53 2007 -0600
44957 Move 8610 DIU interface structure definitions to header file.
44959 These two structures are still needed during the
44960 initialization and setup of the DIU hardware.
44961 So move them to the fsl_diu_fb.h file for now.
44964 Noticed-by: York Sun <yorksun@freescale.com>
44965 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44967 commit 080c646dbf474a109c3f85718fb01ce042a38c45
44968 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44969 Date: Tue Nov 20 20:14:18 2007 +0100
44971 drivers/i2c : move i2c drivers to drivers/i2c
44973 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44975 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
44976 Author: Wolfgang Denk <wd@denx.de>
44977 Date: Mon Nov 19 22:20:24 2007 +0100
44979 Prepare for 1.3.0 release.
44981 Signed-off-by: Wolfgang Denk <wd@denx.de>
44983 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
44984 Author: Haiying Wang <Haiying.Wang@freescale.com>
44985 Date: Mon Nov 19 10:02:13 2007 -0500
44987 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
44989 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
44991 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
44993 commit f8c320609366176b31104d9bf5e295232e1c7f1d
44994 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
44995 Date: Mon Nov 19 11:14:16 2007 +0900
44997 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
44999 lowlevel_init.S: Assembler messages:
45000 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
45002 Looking at codes, the `memtest' and `clearmem' are intentional mixed
45003 use of `global symbols' and `label' for debugging purpose. To make it
45004 build, just disable global-symbols-use for now. As a result `memtest'
45005 still remains as unused, but leave it be...
45007 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
45009 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
45010 Author: Wolfgang Denk <wd@denx.de>
45011 Date: Mon Nov 19 12:59:14 2007 +0100
45013 Fix build problems with mp2usb board
45015 Signed-off-by: Wolfgang Denk <wd@denx.de>
45017 commit 6bf4c686afca1e86e1c384d59218f914605713bf
45018 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45019 Date: Sun Nov 18 18:36:11 2007 +0100
45021 s3c24x0: Fix usb_ohci.c missing in Makefile
45022 and usb_ohci.c warning differ in signedness
45024 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45026 commit 6073f61e078da5ddb521b56256bcc36508589883
45027 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45028 Date: Sun Nov 18 12:55:02 2007 +0100
45030 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
45032 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45034 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
45035 Author: Wolfgang Denk <wd@denx.de>
45036 Date: Sun Nov 18 17:11:09 2007 +0100
45038 Fix compiler warnings for ARM systems.
45040 Signed-off-by: Wolfgang Denk <wd@denx.de>
45042 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
45043 Author: Wolfgang Denk <wd@denx.de>
45044 Date: Sun Nov 18 16:36:27 2007 +0100
45046 Fix compiler warnings for PPC systems. Update CHANGELOG.
45048 Signed-off-by: Wolfgang Denk <wd@denx.de>
45050 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
45051 Author: Stefan Roese <sr@denx.de>
45052 Date: Sun Nov 18 14:44:44 2007 +0100
45054 ppc4xx: Correct 405EX PCIe UTL register mapping
45056 Map 4k mem space for UTL registers for each port.
45058 Signed-off-by: Stefan Roese <sr@denx.de>
45060 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
45061 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45062 Date: Sat Nov 17 11:31:10 2007 +0100
45064 Fix warning differ in signedness in net/net.c and net/nfs.c
45066 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
45067 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45068 Date: Sat Nov 17 20:42:45 2007 +0900
45070 gth2.c: Fix a warning on gth2 build.
45072 gth2.c: In function 'misc_init_r':
45073 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
45075 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45077 commit 2309c130aa4c84b91bd874a41269c923eb61b555
45078 Author: Stefan Roese <sr@denx.de>
45079 Date: Sat Nov 17 07:58:25 2007 +0100
45081 Fix warning differ in signedness in common/cmd_scsi.c
45083 Signed-off-by: Stefan Roese <sr@denx.de>
45085 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
45086 Author: Stefan Roese <sr@denx.de>
45087 Date: Sat Nov 17 14:52:29 2007 +0100
45089 ppc4xx: Update AMCC Kilauea config file
45091 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
45093 Signed-off-by: Stefan Roese <sr@denx.de>
45095 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
45096 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45097 Date: Sat Nov 17 20:05:26 2007 +0900
45099 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
45101 Current trick to pick up GNU assembler minor version does not work with the
45102 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
45105 $ sde-as --version |grep "GNU assembler"
45106 GNU assembler 2.15.94 mipssde-6.02.02-20050602
45107 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
45109 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
45113 $ mips-linux-as --version |grep "GNU assembler"
45114 GNU assembler (GNU Binutils) 2.18
45115 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
45117 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
45121 As a result of above, you'll see many noises with such binutils:
45124 /bin/sh: line 0: [: : integer expression expected
45125 /bin/sh: line 0: [: : integer expression expected
45126 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
45127 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
45128 /bin/sh: line 0: [: : integer expression expected
45129 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
45130 /bin/sh: line 0: [: : integer expression expected
45131 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
45132 /bin/sh: line 0: [: : integer expression expected
45134 This patch simplifies the trick and makes it work with both versions of gas.
45135 I also replace an expensive `awk (or gawk)' with `cut'.
45137 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45139 commit 16664f72850846e645616da1c0fa5afcd6d15f15
45140 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45141 Date: Sat Nov 17 20:05:26 2007 +0900
45143 [MIPS] Remove useless instructions for initializing $gp.
45145 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45147 commit 03c031d5660ea946c39af6e2e16267da857c609f
45148 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45149 Date: Sat Oct 27 15:27:06 2007 +0900
45151 [MIPS] MIPS 4K core: Coding style cleanups
45153 No logical changes.
45155 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45157 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
45158 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45159 Date: Sat Nov 17 20:05:20 2007 +0900
45161 [MIPS] gth2.c: Fix a warning on gth2 build.
45163 gth2.c: In function 'misc_init_r':
45164 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
45166 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45168 commit 4fbd0741b2b6441da10be93e10267122581b7079
45169 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45170 Date: Sat Oct 27 15:22:33 2007 +0900
45172 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
45174 au1x00_eth.c: In function 'au1x00_miiphy_write':
45175 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
45177 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45179 commit f01320459736f156707425cf8112f98606301aa4
45180 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45181 Date: Sat Oct 27 15:00:25 2007 +0900
45183 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
45185 au1x00_eth.c: In function 'au1x00_enet_initialize':
45186 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
45187 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
45188 au1x00_eth.c:246: error: for each function it appears in.)
45189 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
45190 au1x00_eth.c: In function 'au1x00_miiphy_write':
45191 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
45192 make[1]: *** [au1x00_eth.o] Error 1
45194 Fixed by moving these two functions forward.
45196 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45198 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
45199 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45200 Date: Sat Oct 27 15:00:25 2007 +0900
45202 MAKEALL: Added missing pb1000 board
45204 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45206 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
45207 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45208 Date: Sat Oct 27 15:00:24 2007 +0900
45210 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
45212 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45214 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
45215 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45216 Date: Sat Oct 27 15:00:24 2007 +0900
45218 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
45220 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45222 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
45223 Author: Wolfgang Denk <wd@denx.de>
45224 Date: Sat Nov 17 02:34:38 2007 +0100
45226 Update CHANGELOIG, prepare for -rc4
45228 Signed-off-by: Wolfgang Denk <wd@denx.de>
45230 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
45231 Author: Luotao Fu <l.fu@pengutronix.de>
45232 Date: Wed Nov 14 18:58:33 2007 +0100
45234 Fix the i2c frequency and default address in rsdproto board
45236 rsdproto board support has wrong I2C frequency and wrong return value
45239 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
45241 commit 429c180edad038f91c989cb14b478228092e7054
45242 Author: Wolfgang Denk <wd@denx.de>
45243 Date: Sat Nov 17 01:45:38 2007 +0100
45245 powerpc: Backout relocation changes for MPC5121, too.
45247 Apply Grant Likely's backout to MPC5121 code, too.
45249 Pointed out by Rafal Jaworowski <raj@semihalf.com>
45251 Signed-off-by: Wolfgang Denk <wd@denx.de>
45253 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
45254 Author: Grant Likely <grant.likely@secretlab.ca>
45255 Date: Tue Nov 13 22:18:33 2007 -0700
45257 powerpc: Backout relocation changes.
45259 Ugh. I *hate* to back this change out, but these compiler flags don't
45260 work for relocation on all versions of GCC. I've not been able to
45261 reproduce the environment in my setup (and hence, not been able to
45262 find a combination that *does* work), so I've got no choice but to go
45263 back to the old gcc flags and linker script.
45265 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45267 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
45268 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45269 Date: Tue Nov 13 09:11:05 2007 +0100
45271 Fixed mips_io_port_base build errors.
45273 This patch has been sent on:
45276 Although mips_io_port_base is currently a part of IDE command, it is quite
45277 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
45278 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
45280 This patch is triggered by multiple definition of `mips_io_port_base' build
45281 error on gth2 (and tb0229 also needs this fix.)
45283 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
45284 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
45285 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
45286 make: *** [u-boot] Error 1
45288 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45289 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45291 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
45292 Author: Wolfgang Denk <wd@denx.de>
45293 Date: Sat Nov 17 01:30:40 2007 +0100
45295 Fix a bug in the slave serial programming mode for the Xilinx
45296 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
45297 the most significant bit was set, which did not work on any
45298 architecture where "char" defaulted to be an unsigned type.
45300 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
45302 Signed-off-by: Wolfgang Denk <wd@denx.de>
45304 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
45305 Author: Jon Loeliger <jdl@freescale.com>
45306 Date: Thu Nov 1 12:23:29 2007 -0500
45308 86xx: Fix broken variable reference when #def DEBUGing.
45310 Sometimes you can't reference the DDR2 controller variables.
45312 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45314 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
45315 Author: Jason Jin <Jason.jin@freescale.com>
45316 Date: Fri Oct 26 18:32:00 2007 +0800
45318 make 8610 board use pixis reset
45320 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45322 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
45323 Author: Jason Jin <Jason.jin@freescale.com>
45324 Date: Mon Oct 29 19:26:21 2007 +0800
45326 Unify pixis_reset altbank across board families
45328 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
45329 into the separate board config files.
45331 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45334 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
45335 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45336 Date: Wed Nov 7 08:19:21 2007 +0100
45338 Fix warning: pointer targets in assignment differ in signedness
45340 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45342 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
45343 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45344 Date: Wed Nov 7 08:19:19 2007 +0100
45346 Fix warning differ in signedness in common/cmd_ide.c
45348 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45350 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
45351 Author: Stefan Roese <sr@denx.de>
45352 Date: Fri Nov 16 14:16:54 2007 +0100
45354 ppc4xx: Enable 405EX PCIe UTL register configuration
45356 Till now the UTL registers on 405EX were not initialized but left with
45357 their default values. This patch new initializes some of the UTL
45358 registers on 405EX.
45360 Signed-off-by: Stefan Roese <sr@denx.de>
45362 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
45363 Author: Stefan Roese <sr@denx.de>
45364 Date: Fri Nov 16 14:00:59 2007 +0100
45366 ppc4xx: Update AMCC Makalu for board rev 1.1
45368 This patch adds changes needed for Makalu rev 1.1:
45370 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
45371 - Enable 2nd ethernet port EMAC1
45372 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
45373 - Reset PCIe ports via GPIO upon bootup
45375 Signed-off-by: Stefan Roese <sr@denx.de>
45377 commit 4d4faae65e115e327425cd514c1a35146a85166b
45378 Author: Grant Likely <grant.likely@secretlab.ca>
45379 Date: Mon Sep 24 09:05:31 2007 -0600
45381 Group PCI and PCMCIA drivers in drivers/Makefile
45383 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45385 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
45386 Author: Grant Likely <grant.likely@secretlab.ca>
45387 Date: Mon Sep 24 09:05:31 2007 -0600
45389 Group block/flash drivers in drivers/Makefile
45391 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45393 commit df58c81551700f058b44cacf55a7997fa63bfe0a
45394 Author: Grant Likely <grant.likely@secretlab.ca>
45395 Date: Mon Sep 24 09:05:31 2007 -0600
45397 Group USB drivers in drivers/Makefile
45399 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45401 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
45402 Author: Grant Likely <grant.likely@secretlab.ca>
45403 Date: Mon Sep 24 09:05:30 2007 -0600
45405 Group i2c drivers in drivers/Makefile
45407 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45409 commit ec00c76de0e5971273905998d62d6bb119324218
45410 Author: Grant Likely <grant.likely@secretlab.ca>
45411 Date: Mon Sep 24 09:05:30 2007 -0600
45413 Group console drivers in drivers/Makefile
45415 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45417 commit 754f230aa01b8c789fc31f8013c2487954073300
45418 Author: Grant Likely <grant.likely@secretlab.ca>
45419 Date: Mon Sep 24 09:05:30 2007 -0600
45421 Group network drivers in drivers/Makefile
45423 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45425 commit f0037c56b0d12cd46215124667b9f83d60ef9391
45426 Author: Grant Likely <grant.likely@secretlab.ca>
45427 Date: Mon Sep 24 09:05:30 2007 -0600
45429 Build: split COBJS value into multiple lines
45431 This change is in preparation for condtitionial compile support in the
45432 build system. By spliting them all into seperate lines now, subsequent
45433 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
45434 be less invasive and easier to review
45436 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45438 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
45439 Author: Grant Likely <grant.likely@secretlab.ca>
45440 Date: Mon Sep 24 09:05:30 2007 -0600
45442 Add .gitignore files
45444 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45445 Acked-by: Kim Phillips <kim.phillips@freescale.com>
45447 commit 955413f35f054a82e40042f1dbcf501c6a05719b
45448 Author: Grant Likely <grant.likely@secretlab.ca>
45449 Date: Thu Nov 15 08:27:52 2007 -0700
45451 Revert "Correct relocation fixup for mpc5xx"
45453 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
45454 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45456 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
45457 Author: Grant Likely <grant.likely@secretlab.ca>
45458 Date: Thu Nov 15 08:24:32 2007 -0700
45460 Revert "Correct fixup relocation for MPC5xxx"
45462 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
45463 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45465 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
45466 Author: Grant Likely <grant.likely@secretlab.ca>
45467 Date: Thu Nov 15 08:21:04 2007 -0700
45469 Revert "Correct fixup relocation for mpc8220"
45471 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
45472 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45474 commit 70922342369e5e39b286fe21e768a239ca07a514
45475 Author: Grant Likely <grant.likely@secretlab.ca>
45476 Date: Thu Nov 15 08:20:57 2007 -0700
45478 Revert "Correct fixup relocation for mpc824x"
45480 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
45481 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45483 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
45484 Author: Grant Likely <grant.likely@secretlab.ca>
45485 Date: Thu Nov 15 08:20:50 2007 -0700
45487 Revert "Correct fixup relocation for mpc8260"
45489 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
45490 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45492 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
45493 Author: Grant Likely <grant.likely@secretlab.ca>
45494 Date: Thu Nov 15 08:20:43 2007 -0700
45496 Revert "Correct fixup relocation for mpc83xx"
45498 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
45499 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45501 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
45502 Author: Grant Likely <grant.likely@secretlab.ca>
45503 Date: Thu Nov 15 08:20:25 2007 -0700
45505 Revert "[MPC512x] Correct fixup relocation"
45507 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
45508 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45510 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
45511 Author: Stefan Roese <sr@denx.de>
45512 Date: Thu Nov 15 14:25:09 2007 +0100
45514 ppc4xx: Small AMCC Kilauea cleanup
45516 Remove not needed pci_target_init() function.
45518 Signed-off-by: Stefan Roese <sr@denx.de>
45520 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
45521 Author: Stefan Roese <sr@denx.de>
45522 Date: Thu Nov 15 14:23:55 2007 +0100
45524 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
45526 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
45527 - Cleanup of the 4xx GPIO functions
45528 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
45530 Signed-off-by: Stefan Roese <sr@denx.de>
45532 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
45533 Author: Stefan Roese <sr@denx.de>
45534 Date: Thu Nov 15 14:20:08 2007 +0100
45536 ppc4xx: AMCC Taihu board config file cleanup
45538 This patch makes the AMCC Taihu a little more compatible to the other
45541 Signed-off-by: Stefan Roese <sr@denx.de>
45543 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
45544 Author: Marian Balakowicz <m8@semihalf.com>
45545 Date: Thu Nov 15 13:37:28 2007 +0100
45547 [INKA4x0] NG hardware: flash support
45549 Disabled and remove inka4x0 custom flash driver, use CFI flash
45552 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
45554 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
45555 Author: Marian Balakowicz <m8@semihalf.com>
45556 Date: Thu Nov 15 13:29:55 2007 +0100
45558 [INKA4x0] NG hardware: SDRAM support
45560 Add support for three new DDR chips that may be present on a NG
45561 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
45563 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
45565 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
45567 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
45568 Author: Marian Balakowicz <m8@semihalf.com>
45569 Date: Thu Nov 15 13:24:43 2007 +0100
45571 [INKA4x0] NG hardware: platform code update
45573 - Cleanup compile warnings.
45574 - Add missing '\0' in default environment.
45575 - Increase CFG_MONITOR_LEN to 256 KiB.
45576 - Add required CFG_USE_PPCENV.
45578 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
45580 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
45581 Author: Peter Pearse <peter.pearse@arm.com>
45582 Date: Thu Nov 15 08:58:00 2007 +0000
45584 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
45585 Remove warnings re onenand_read() & write()
45587 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
45588 Author: Peter Pearse <peter.pearse@arm.com>
45589 Date: Thu Nov 15 08:45:13 2007 +0000
45593 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
45594 Author: Roy Zang <tie-fei.zang@freescale.com>
45595 Date: Thu Sep 13 18:52:28 2007 +0800
45597 Enable ULi1575 Ethernet support in 8610HPCD config
45599 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
45600 Acked-by: Jon Loeliger <jdl@freescale.com>
45602 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
45603 Author: Stefan Roese <sr@denx.de>
45604 Date: Tue Nov 13 08:18:20 2007 +0100
45606 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
45608 Signed-off-by: Stefan Roese <sr@denx.de>
45610 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
45611 Author: Stefan Roese <sr@denx.de>
45612 Date: Tue Nov 13 08:06:11 2007 +0100
45614 ppc4xx: Fix 405EX PCIe UTLSET register setup
45616 Signed-off-by: Stefan Roese <sr@denx.de>
45618 commit 1ce55151c85d068f70317a8d65c61058b891afb4
45619 Author: Heiko Schocher <hs@denx.de>
45620 Date: Tue Nov 13 07:50:29 2007 +0100
45622 [UC101] SRAM now with 2 MB working.
45624 Signed-off-by: Heiko Schocher <hs@denx.de>
45626 commit 2d14684341109a69616e4d6016cd61402d55086f
45627 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
45628 Date: Fri Nov 9 15:37:53 2007 +0100
45630 ppc4xx: Use generic usb-ohci driver for sequoia board
45632 This patch makes the sequoia board use the generic usb-ohci driver
45633 instead of cpu/ppc4xx/usb_ohci.c.
45635 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
45636 Signed-off-by: Stefan Roese <sr@denx.de>
45638 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
45639 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
45640 Date: Fri Nov 9 15:37:23 2007 +0100
45642 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
45644 This patch disables the 44x d-cache on 'usb start' and
45645 reenables it on 'usb stop'. This should be seen as a
45646 temporary fix until the generic usb-ohci driver can
45647 life with d-cache enabled.
45649 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
45650 Signed-off-by: Stefan Roese <sr@denx.de>
45652 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
45653 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
45654 Date: Fri Nov 9 15:36:44 2007 +0100
45656 ppc4xx: Remove redundant code from 4xx network driver
45658 This patch removes some redundant code and decrements the end
45659 address of cache flush and invalidate by 1.
45661 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
45662 Signed-off-by: Stefan Roese <sr@denx.de>
45664 commit 5ca9881aad8c413ac2a82868a5e3719178254502
45665 Author: Peter Pearse <peter.pearse@arm.com>
45666 Date: Fri Nov 9 15:24:26 2007 +0000
45668 Add apollon board support
45669 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
45671 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
45672 Author: Stefan Roese <sr@denx.de>
45673 Date: Fri Nov 9 12:19:58 2007 +0100
45675 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
45677 Signed-off-by: Stefan Roese <sr@denx.de>
45679 commit c7f69c340277935a6c19a956421852da944a365f
45680 Author: Stefan Roese <sr@denx.de>
45681 Date: Fri Nov 9 12:18:54 2007 +0100
45683 ppc4xx: Make output a little shorter on I2C bootrom detection
45685 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
45686 already print a line with the information which I2C bootrom is
45687 used for bootstrap configuration. So we don't need this extra line
45688 with "I2C boot EEPROM en-/dis-abled".
45690 This patch also has a little code cleanup integrated.
45692 Signed-off-by: Stefan Roese <sr@denx.de>
45694 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
45695 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45696 Date: Thu Nov 8 12:50:18 2007 -0600
45698 ColdFire: MCF5329 - Remove reset registers from CCM
45700 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45702 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
45703 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45704 Date: Thu Nov 8 12:31:11 2007 -0600
45706 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
45708 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45710 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
45711 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45712 Date: Thu Nov 8 12:19:01 2007 -0600
45714 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
45716 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45718 commit 225a24b5e062ad94627424508ae814f51dbe1a34
45719 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45720 Date: Wed Nov 7 18:00:54 2007 -0600
45722 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
45724 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45726 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
45727 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45728 Date: Wed Nov 7 17:56:15 2007 -0600
45730 ColdFire: MCF532x - Update do_reset() using core reset
45732 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45734 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
45735 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45736 Date: Wed Nov 7 17:51:00 2007 -0600
45738 ColdFire: Update cpu flag for 4.2-xx compiler
45740 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45742 commit 070ba56115b4da63b46e974287fa4550d4023386
45743 Author: York Sun <yorksun@freescale.com>
45744 Date: Wed Oct 31 14:59:04 2007 -0500
45746 8610: Add console frame buffer support to FSL 8610 DIU driver.
45748 Add cfb console support to FSL 8610 DIU driver.
45749 Inspect board version from PIXIS to obtain correct pixel format.
45751 Use #define CONFIG_VIDEO in config file to enable fb console.
45753 To switch monitor, set monitor variable to
45754 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
45755 followed by "diufb init".
45757 Preserve logo bitmap at the top of the fb console.
45759 Signed-off-by: York Sun <yorksun@freescale.com>
45760 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45762 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
45763 Author: York Sun <yorksun@freescale.com>
45764 Date: Mon Oct 29 13:58:39 2007 -0500
45766 8610: Add 8610 DIU display driver
45768 1280x1024 and 1024x768 @ 32 bpp are supported now.
45769 DVI, Single-link LVDS, Double-link LVDS are all supported.
45771 Environmental variable "monitor" is used to specify monitor port.
45773 A new command "diufb" is introduced to reinitialize monitor
45774 and display a BMP file in the memory. So far, 1-bit, 4-bit,
45775 8-bit and 24-bit BMP formats are supported.
45778 - initialize the diu driver
45779 Enable the port specified in the environmental variable "monitor"
45782 - display bmp file in memory.
45783 The bmp image should be no bigger than the resolution, 1280x1024
45784 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
45786 Note, this driver allocate memory but doesn't free it after use
45787 It is written on purpose -- to avoid a failure of reallocation
45788 due to memory fragement.
45790 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
45792 Signed-off-by: York Sun <yorksun@freescale.com>
45793 Signed-off-by: Jon loeliger <jdl@freescale.com>
45795 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
45796 Author: York Sun <yorksun@freescale.com>
45797 Date: Wed Oct 31 10:43:59 2007 -0500
45799 FSL: Add a freescale bitmap logo.
45801 This Freescale logo is a 340 x 128 x 4bpp BMP file
45802 that can be displayed by the DIU Framebuffer driver.
45804 Signed-off-by: York Sun <yorksun@freescale.com>
45805 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45807 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
45808 Author: York Sun <yorksun@freescale.com>
45809 Date: Mon Oct 29 13:57:53 2007 -0500
45811 8610: Make some extra debug environment variables conditional.
45813 One may #define ENV_DEBUG to get them back again.
45815 Signed-off-by: York Sun <yorksun@freescale.com>
45817 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
45818 Author: Jason Jin <Jason.jin@freescale.com>
45819 Date: Mon Oct 29 19:26:21 2007 +0800
45821 8610: Actually enable pixis_reset CONFIGs
45823 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45825 commit f3bceaab230b4748d0afc4109b6837308f018b40
45826 Author: Jason Jin <Jason.jin@freescale.com>
45827 Date: Fri Oct 26 18:31:59 2007 +0800
45829 Fix the BAT definition of PCI IO on 8610 board
45831 The address in the BAT register is aligned with the BAT size.
45832 The original definition actually did not define BAT for PCIE2 IO.
45833 This patch fix this.
45835 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45837 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
45838 Author: Jason Jin <Jason.jin@freescale.com>
45839 Date: Mon Oct 29 19:26:21 2007 +0800
45841 Unify pixis_reset altbank across board families
45843 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
45844 into the separate board config files.
45846 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45847 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45849 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
45850 Author: Jason Jin <Jason.jin@freescale.com>
45851 Date: Fri Oct 26 18:32:00 2007 +0800
45853 make 8610 board use pixis reset
45855 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45857 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
45858 Author: Jon Loeliger <jdl@freescale.com>
45859 Date: Thu Nov 1 12:23:29 2007 -0500
45861 86xx: Fix broken variable reference when #def DEBUGing.
45863 Sometimes you can't reference the DDR2 controller variables.
45865 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45867 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
45868 Author: Roy Zang <tie-fei.zang@freescale.com>
45869 Date: Mon Nov 5 17:39:24 2007 +0800
45871 Implement general ULi 526x Ethernet driver support in U-boot
45873 This patch implements general ULi 526x Ethernet driver.
45874 Until now, it is the only native Ethernet port on
45875 MPC8610HPCD board, but it could be used on other boards
45876 with ULi 526x Ethernet port as well.
45878 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
45879 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45880 Acked-by: Jon Loeliger <jdl@freescale.com>
45881 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45883 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
45884 Author: Larry Johnson <lrj@arlinx.com>
45885 Date: Thu Nov 1 08:46:50 2007 -0500
45887 NET: Add Ethernet 1000BASE-X support for PPC4xx
45889 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
45890 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
45891 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
45892 "mii info" command is modified to distinguish between 1000BASE-T and -X.
45894 Signed-off-by: Larry Johnson <lrj@acm.org>
45895 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45897 commit 298035df4948b113d29ac0e694717d34b95bc5dc
45898 Author: Larry Johnson <lrj@arlinx.com>
45899 Date: Wed Oct 31 11:21:29 2007 -0500
45901 NET: Cosmetic changes
45903 Signed-off-by: Larry Johnson <lrj@acm.org>
45904 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45906 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
45907 Author: Stefan Roese <sr@denx.de>
45908 Date: Mon Nov 5 07:43:05 2007 +0100
45910 ppc4xx: Make output a little shorter on PCIe detection
45912 Now not max 3 lines but 2 lines are printed per PCIe port.
45914 Signed-off-by: Stefan Roese <sr@denx.de>
45916 commit 992742a5b09d9040adbd156fb90756af66ade310
45917 Author: Wolfgang Denk <wd@denx.de>
45918 Date: Sat Nov 3 23:09:27 2007 +0100
45920 Cleanup coding style; update CHANGELOG
45922 Signed-off-by: Wolfgang Denk <wd@denx.de>
45924 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
45925 Author: Bruce Adler <bruce.adler@ccpu.com>
45926 Date: Fri Nov 2 13:15:42 2007 -0700
45928 fix wording in README
45930 Changed the wording to properly describe the shadowing
45931 of the environment from ROM to RAM
45933 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
45935 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
45936 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45937 Date: Wed Oct 31 02:18:15 2007 +0900
45939 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
45941 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45943 commit ec22755799466c8a103664bb3a5e647bf9c238f4
45944 Author: Vlad Lungu <vlad@comsys.ro>
45945 Date: Thu Oct 25 16:08:14 2007 +0300
45947 Trimmed some variables in ne2000.c
45949 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
45951 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
45952 Author: Zhang Wei <wei.zhang@freescale.com>
45953 Date: Thu Oct 25 17:51:27 2007 +0800
45955 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
45957 The scan code of the key 'z' is 0x1d, which should be handled.
45959 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
45962 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45964 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
45965 Author: Zhang Wei <wei.zhang@freescale.com>
45966 Date: Thu Oct 25 17:30:04 2007 +0800
45968 Fix USB support issue for MPC8641HPCN board.
45970 The configuration file has already enabled USB, but it
45971 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
45972 on MPC8641HPCN can not work because of the wrong USB
45975 And add the USB command to U-Boot commands list.
45977 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45979 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
45980 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45981 Date: Wed Oct 24 18:16:01 2007 +0200
45983 Use config_cmd_default.h instead of config_cmd_all.h
45985 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45987 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
45988 Author: Marian Balakowicz <m8@semihalf.com>
45989 Date: Wed Oct 24 01:37:36 2007 +0200
45991 TQM5200: Call usb_cpu_init() during board init
45993 usb_cpu_init() configures GPS USB pins, clocks, etc. and
45994 is required for proper operation of kernel USB subsystem.
45995 This setup was previously done in the kernel by the fixup
45996 code which is being removed, thus low level init must be
45997 done by U-boot now.
45999 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
46001 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
46002 Author: Guennadi Liakhovetski <lg@denx.de>
46003 Date: Tue Oct 23 16:25:50 2007 +0200
46007 An obvious typo. Originally fixed in linkstation u-boot port.
46009 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
46011 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
46012 Author: Guennadi Liakhovetski <lg@denx.de>
46013 Date: Tue Oct 23 14:35:05 2007 +0200
46015 Fix a typo in cpu/mpc824x/interrupts.c
46017 Since December 2003 the timer_interrupt_cpu() function in
46018 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
46019 parameter. Remove it.
46021 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
46023 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
46024 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
46025 Date: Wed Oct 17 11:13:51 2007 +0200
46027 add ft_cpu_setup(..) on mpc8260
46029 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
46030 based on code from mpc5xxx
46032 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
46035 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
46036 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
46037 Date: Wed Oct 17 11:18:42 2007 +0200
46039 changes for IDS8247 board support
46041 To get the IDS8247 board working following are done:
46042 - FCC2 is deactivated
46043 - FCC1 is activated
46045 - CFI driver is activated
46046 - Adapted for use with LIBFDT
46048 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
46051 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
46052 Author: Stefan Roese <sr@denx.de>
46053 Date: Sat Nov 3 12:08:28 2007 +0100
46055 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
46057 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
46058 Again, only one image supports both targets.
46060 Signed-off-by: Stefan Roese <sr@denx.de>
46062 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
46063 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
46064 Date: Wed Oct 24 15:48:37 2007 +0200
46066 ATSTK1002: Remove default ethernet addresses
46068 Wolfgang is right: It's not a good idea to set up default initial
46069 ethernet addresses for a board, even though they belong to the local
46072 This will change the failure mode from "IT manager screams at you for
46073 using duplicate ethernet addresses" to a nice error message explaining
46074 that the ethernet address hasn't been set properly.
46076 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
46078 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
46079 Author: Justin Flammia <jflammia@savantav.com>
46080 Date: Mon Oct 29 17:40:35 2007 -0400
46084 This is a multi-part message in MIME format.
46086 commit e6e505eae94ed721e123e177489291fc4544b7b8
46087 Author: Justin Flammia <jflammia@savantav.com>
46088 Date: Mon Oct 29 17:19:03 2007 -0400
46090 Found a bug in the way the DHCP Request packet is built, where the IP address
46091 that is offered by the server is bound to prematurely. This patch is a fix of
46092 that bug where the IP address offered by the DHCP server is not used until
46093 after the DHCP ACK from the server is received.
46095 Signed-off-by: Justin Flammia <jflammia@savantav.com>
46096 Signed-off-by: Ben Warren <bwarren@qstreams.com>
46098 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
46099 Author: Stefan Roese <sr@denx.de>
46100 Date: Wed Oct 31 20:58:34 2007 +0100
46102 ppc4xx: Fix acadia_nand build problem
46104 Since the cache handling functions were moved from start.S into cache.S
46105 the acadia NAND booting Makfile needs to be adapted accordingly.
46107 Signed-off-by: Stefan Roese <sr@denx.de>
46109 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
46110 Author: Stefan Roese <sr@denx.de>
46111 Date: Wed Oct 31 20:57:11 2007 +0100
46113 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
46115 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
46116 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
46117 boards by defining CONFIG_4xx_DCACHE in the board config file. This
46118 option will disappear, when more boards use is successfully and no
46119 more known problems exist.
46121 This is tested successfully on Sequoia and Katmai. The only problem that
46122 needs to be fixed is, that USB is not working on Sequoia right now, since
46123 it will need some cache handling code too, similar to the 4xx EMAC driver.
46125 Signed-off-by: Stefan Roese <sr@denx.de>
46127 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
46128 Author: Stefan Roese <sr@denx.de>
46129 Date: Wed Oct 31 20:51:10 2007 +0100
46131 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
46133 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
46134 disable the cache for the CPU POST tests, since these tests consist
46135 of self modifying code. This is done via the new change_tlb() function.
46137 Signed-off-by: Stefan Roese <sr@denx.de>
46139 commit f71b2888b4b3c870909a0341427b2a914246f81f
46140 Author: Stefan Roese <sr@denx.de>
46141 Date: Wed Oct 31 20:47:26 2007 +0100
46143 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
46145 This patch enables the 4xx EMAC POST driver to work too, when dcache is
46148 Signed-off-by: Stefan Roese <sr@denx.de>
46150 commit a2685904061b35a17583d65fe47cdc2686a69eaa
46151 Author: Stefan Roese <sr@denx.de>
46152 Date: Wed Oct 31 20:45:53 2007 +0100
46154 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
46156 Signed-off-by: Stefan Roese <sr@denx.de>
46158 commit ff768cb168d8157c24a25016dbfbeb465e47f420
46159 Author: Stefan Roese <sr@denx.de>
46160 Date: Wed Oct 31 18:01:24 2007 +0100
46162 ppc4xx: Change 4xx ethernet driver to handle cached memory too
46164 This patch enables the 4xx EMAC driver to work too, when dcache is
46167 Signed-off-by: Stefan Roese <sr@denx.de>
46169 commit 483e09a223c666269ef81d3573a6591b1046b0ef
46170 Author: Stefan Roese <sr@denx.de>
46171 Date: Wed Oct 31 17:59:22 2007 +0100
46173 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
46175 This function is used to either turn cache on or off in a specific
46178 Signed-off-by: Stefan Roese <sr@denx.de>
46180 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
46181 Author: Stefan Roese <sr@denx.de>
46182 Date: Wed Oct 31 17:57:52 2007 +0100
46184 ppc4xx: Remove cache definition from 4xx board config files
46186 All 4xx board config files don't need the cache definitions anymore.
46187 These are now defined in common headers.
46189 Signed-off-by: Stefan Roese <sr@denx.de>
46191 commit 9b94ac61d2176185c30adf0793e079ec30e68687
46192 Author: Stefan Roese <sr@denx.de>
46193 Date: Wed Oct 31 17:55:58 2007 +0100
46195 ppc4xx: Rework 4xx cache support
46197 New cache handling functions added and all existing functions
46198 moved from start.S into seperate cache.S.
46200 Signed-off-by: Stefan Roese <sr@denx.de>
46202 commit 06713773da4ac3d390c63d82641eb553224b27c2
46203 Author: Stefan Roese <sr@denx.de>
46204 Date: Tue Oct 23 18:03:12 2007 +0200
46206 ppc4xx: Remove compiler warning from previous commit
46208 Signed-off-by: Stefan Roese <sr@denx.de>
46210 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
46211 Author: Stefan Roese <sr@denx.de>
46212 Date: Tue Oct 23 14:40:30 2007 +0200
46214 ppc4xx: Remove temporary TLB entry in POST cache test
46216 Signed-off-by: Stefan Roese <sr@denx.de>
46218 commit 1338e6a81834099ba19733b69aafd8ef5f098094
46219 Author: Stefan Roese <sr@denx.de>
46220 Date: Tue Oct 23 14:05:08 2007 +0200
46222 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
46224 I lately noticed, that newer 4xx board with GBit support sometimes don't
46225 finish link autonegotiation in 4 seconds. Changing this timeout to 5
46226 seconds seems fine here.
46228 Signed-off-by: Stefan Roese <sr@denx.de>
46230 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
46231 Author: Stefan Roese <sr@denx.de>
46232 Date: Tue Oct 23 14:03:17 2007 +0200
46234 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
46236 This patch changes all in32/out32 calls to use the recommended in_be32/
46237 out_be32 macros instead.
46239 Signed-off-by: Stefan Roese <sr@denx.de>
46241 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
46242 Author: Stefan Roese <sr@denx.de>
46243 Date: Thu Oct 25 12:24:59 2007 +0200
46245 ppc4xx: Fix POST ethernet test for Haleakala
46247 The POST ethernet test needed to be changed to dynamically determine
46248 the count of ethernet devices. This code is cloned from the 4xx
46251 Signed-off-by: Stefan Roese <sr@denx.de>
46253 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
46254 Author: Stefan Roese <sr@denx.de>
46255 Date: Tue Oct 23 11:31:05 2007 +0200
46257 ppc4xx: Correct UART input clock calculation and passing to fdt
46259 We now use a value in the gd (global data) structure for the UART input
46260 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
46263 Signed-off-by: Stefan Roese <sr@denx.de>
46265 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
46266 Author: Stefan Roese <sr@denx.de>
46267 Date: Tue Oct 23 10:10:08 2007 +0200
46269 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
46271 The Haleakala is nearly identical with the Kilauea eval board. The only
46272 difference is that the 405EXr only supports one EMAC and one PCIe
46273 interface. This patch adds support for the Haleakala board by using
46274 the identical image for Kilauea and Haleakala. The distinction is done
46275 by comparing the PVR.
46277 Signed-off-by: Stefan Roese <sr@denx.de>
46279 commit 9f798766aa85e62eb8fa8c721e148df609b78137
46280 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
46281 Date: Tue Oct 23 08:29:10 2007 +0200
46283 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
46285 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
46288 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
46289 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
46290 modules are still plugged in. So it is recommended to remove the DIMM
46291 modules while using the NAND booting code with the fixed SDRAM setup!
46293 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
46294 Signed-off-by: Stefan Roese <sr@denx.de>
46296 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
46297 Author: Stefan Roese <sr@denx.de>
46298 Date: Mon Oct 22 16:24:44 2007 +0200
46300 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
46302 Signed-off-by: Stefan Roese <sr@denx.de>
46304 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
46305 Author: Stefan Roese <sr@denx.de>
46306 Date: Mon Oct 22 16:22:40 2007 +0200
46308 ppc4xx: Rework of 4xx serial driver (4)
46312 - Use in_8/out_8 macros instead of in8/out8
46313 - No need for UART_BASE marco anymore, now really handled via function
46315 - serial_init_common() introduced
46316 - Further coding style cleanup
46318 Signed-off-by: Stefan Roese <sr@denx.de>
46320 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
46321 Author: Stefan Roese <sr@denx.de>
46322 Date: Mon Oct 22 15:45:49 2007 +0200
46324 ppc4xx: Rework of 4xx serial driver (3)
46326 Change all linker scripts to reference the changed driver name iop480_uart.o.
46328 Signed-off-by: Stefan Roese <sr@denx.de>
46330 commit 882ae41274921f9016131806bdeb27e19606f47a
46331 Author: Stefan Roese <sr@denx.de>
46332 Date: Mon Oct 22 15:44:39 2007 +0200
46334 ppc4xx: Rework of 4xx serial driver (2)
46336 Change all linker scripts to reference the changed driver name 4xx_uart.o.
46338 Note: In most cased all these explicit referencing of these object files
46339 in the linker scripts is not neccessary. Only for manually embedded
46340 environment into the U-Boot image, which is not done is most cases.
46342 Signed-off-by: Stefan Roese <sr@denx.de>
46344 commit ad31e40bed042cb670d0036fea96435007afb838
46345 Author: Stefan Roese <sr@denx.de>
46346 Date: Mon Oct 22 15:09:59 2007 +0200
46348 ppc4xx: Rework of 4xx serial driver (1)
46350 This patch starts the rework of the PPC4xx serial driver. First we split
46351 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
46352 handling code and the other one iop480_uart.c with the UART code for the
46353 PLX-Tech IOP480 PPC (PPC403 based).
46355 Signed-off-by: Stefan Roese <sr@denx.de>
46357 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
46358 Author: Stefan Roese <sr@denx.de>
46359 Date: Mon Oct 22 10:30:38 2007 +0200
46361 ppc4xx: Correct UART input clock calculation and passing to fdt
46363 Signed-off-by: Stefan Roese <sr@denx.de>
46365 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
46366 Author: Stefan Roese <sr@denx.de>
46367 Date: Mon Oct 22 07:34:34 2007 +0200
46369 ppc4xx: Add initial AMCC Makalu 405EX support
46371 Signed-off-by: Stefan Roese <sr@denx.de>
46373 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
46374 Author: Stefan Roese <sr@denx.de>
46375 Date: Mon Oct 22 07:33:52 2007 +0200
46377 ppc4xx: Add freqUART to CPU speed detection
46379 This value is needed later for the device tree configuration of
46382 Signed-off-by: Stefan Roese <sr@denx.de>
46384 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
46385 Author: Stefan Roese <sr@denx.de>
46386 Date: Sun Oct 21 14:26:29 2007 +0200
46388 ppc: Small Kilauea cleanup of config file
46390 Signed-off-by: Stefan Roese <sr@denx.de>
46392 commit 758c037aeead34b49631b8da3a90b1bba14c0410
46393 Author: Stefan Roese <sr@denx.de>
46394 Date: Sun Oct 21 08:16:12 2007 +0200
46396 rtc: Add Xicor/Intersil X1205 RTC support
46398 This patch adds support for the Xicor/Intersil X1205 RTC used on the
46399 AMCC Makalu eval board. This driver is basically cloned from the Linux
46400 driver version (2.6.23).
46402 This patch also introduces the Linux bcd.h header for the BCD2BIN/
46403 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
46404 should be converted to also use this header instead of implementing
46405 their own local copy of these functions/macros.
46407 Signed-off-by: Stefan Roese <sr@denx.de>
46409 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
46410 Author: Stefan Roese <sr@denx.de>
46411 Date: Sun Oct 21 08:12:41 2007 +0200
46413 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
46415 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
46416 PPC440_SYS_INFO structure into the common ppc4xx.h header.
46418 Lot's of other macros are good candidates to be consolidated this way
46421 Signed-off-by: Stefan Roese <sr@denx.de>
46423 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
46424 Author: Stefan Roese <sr@denx.de>
46425 Date: Sun Oct 21 08:05:18 2007 +0200
46427 ppc4xx: Fix size setup in Kilauea DDR2 init routine
46429 The size was initilized wrong. Instead of 256MB, the DDR2 controller
46430 was setup to 512MB. Now the correct values is used.
46432 This patch also does a little cleanup and adds a comment here.
46434 Signed-off-by: Stefan Roese <sr@denx.de>
46436 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
46437 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
46438 Date: Thu Oct 18 17:29:04 2007 +0200
46440 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
46442 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
46443 number is used to access system registers.
46445 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
46446 Signed-off-by: Stefan Roese <sr@denx.de>
46448 commit c36c68160333ac5fe41ec3db12a728b7075b3912
46449 Author: Stefan Roese <sr@denx.de>
46450 Date: Thu Oct 18 07:42:27 2007 +0200
46452 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
46454 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
46455 is the internal SRAM. Since I now ported and tested this endpoint mode
46456 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
46459 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
46462 Signed-off-by: Stefan Roese <sr@denx.de>
46464 commit 5cb4af4791f61843432155142b6cfac901f66c10
46465 Author: Stefan Roese <sr@denx.de>
46466 Date: Thu Oct 18 07:39:38 2007 +0200
46468 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
46470 This patch adds endpoint support for the AMCC Kilauea eval board. It can
46471 be tested by connecting a reworked PCIe cable (only 1x lane singles
46472 connected) to another root-complex.
46474 In this test setup, a 64MB inbound window is configured at BAR0 which maps
46475 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
46476 access the first 64MB of the SDRAM on the PPC side.
46478 Signed-off-by: Stefan Roese <sr@denx.de>
46480 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
46481 Author: Stefan Roese <sr@denx.de>
46482 Date: Sat Oct 13 16:43:23 2007 +0200
46484 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
46486 This patch adds support for dynamic configuration of PCIe ports for the
46487 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
46488 boards Yucca & Katmai and the 405EX board Kilauea.
46490 This dynamic configuration is done via the "pcie_mode" environement
46491 variable. This variable can be set to "EP" or "RP" for endpoint or
46492 rootpoint mode. Multiple values can be joined via the ":" delimiter.
46497 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
46500 Per default Yucca will be configured as:
46503 Per default Katmai will be configured as:
46504 pcie_mode=RP:RP:REP
46506 Per default Kilauea will be configured as:
46509 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
46510 Signed-off-by: Stefan Roese <sr@denx.de>
46512 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
46513 Author: Stefan Roese <sr@denx.de>
46514 Date: Thu Oct 11 11:15:59 2007 +0200
46516 ppc4xx: Enable device tree support (fdt) on Kilauea per default
46518 This patch enables the fdt support on the AMCC Kilauea eval board.
46519 Additionally now EBC ranges fdt fixup is included to support NOR
46520 FLASH mapping via the Linux physmap_of driver.
46522 This Kilauea port now support booting arch/ppc and arch/powerpc
46523 Linux kernels. The default environment "net_nfs" is for arch/ppc
46524 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
46525 support will be removed.
46527 Signed-off-by: Stefan Roese <sr@denx.de>
46529 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
46530 Author: Stefan Roese <sr@denx.de>
46531 Date: Thu Oct 11 11:11:45 2007 +0200
46533 ppc4xx: Add additional debug info to 4xx fdt support
46535 Signed-off-by: Stefan Roese <sr@denx.de>
46537 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
46538 Author: Stefan Roese <sr@denx.de>
46539 Date: Fri Oct 5 21:28:58 2007 +0200
46541 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
46543 Signed-off-by: Stefan Roese <sr@denx.de>
46545 commit 1941cce71b1ae975602854045061e82f94ecd012
46546 Author: Stefan Roese <sr@denx.de>
46547 Date: Fri Oct 5 17:35:10 2007 +0200
46549 ppc4xx: Fix small merge problem in 4xx_enet.c
46551 Signed-off-by: Stefan Roese <sr@denx.de>
46553 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
46554 Author: Stefan Roese <sr@denx.de>
46555 Date: Fri Oct 5 17:11:30 2007 +0200
46557 ppc4xx: Add initial AMCC Kilauea 405EX support
46559 Signed-off-by: Stefan Roese <sr@denx.de>
46561 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
46562 Author: Stefan Roese <sr@denx.de>
46563 Date: Fri Oct 5 17:10:59 2007 +0200
46565 ppc4xx: Add PPC405EX support
46567 Signed-off-by: Stefan Roese <sr@denx.de>
46569 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
46570 Author: Stefan Roese <sr@denx.de>
46571 Date: Fri Oct 5 17:09:36 2007 +0200
46573 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
46575 Signed-off-by: Stefan Roese <sr@denx.de>
46577 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
46578 Author: Stefan Roese <sr@denx.de>
46579 Date: Fri Oct 5 17:07:50 2007 +0200
46581 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
46583 Signed-off-by: Stefan Roese <sr@denx.de>
46585 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
46586 Author: Stefan Roese <sr@denx.de>
46587 Date: Fri Oct 5 17:04:57 2007 +0200
46589 POST: Add 405EX support to 4xx UART POST test
46591 Signed-off-by: Stefan Roese <sr@denx.de>
46593 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
46594 Author: Stefan Roese <sr@denx.de>
46595 Date: Fri Oct 5 15:10:02 2007 +0200
46597 DTT: Prepare DS1775 driver for use of different I2C addresses
46599 Signed-off-by: Stefan Roese <sr@denx.de>
46601 commit 19e93b1e16d267220440d827b920fbad8abfa70f
46602 Author: Stefan Roese <sr@denx.de>
46603 Date: Fri Oct 5 14:23:43 2007 +0200
46605 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
46607 Signed-off-by: Stefan Roese <sr@denx.de>
46609 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
46610 Author: Stefan Roese <sr@denx.de>
46611 Date: Fri Oct 5 09:22:33 2007 +0200
46613 ppc4xx: 4xx_pcie: Disable debug output as default
46615 Signed-off-by: Stefan Roese <sr@denx.de>
46617 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
46618 Author: Stefan Roese <sr@denx.de>
46619 Date: Fri Oct 5 09:18:23 2007 +0200
46621 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
46623 Signed-off-by: Stefan Roese <sr@denx.de>
46625 commit 4dbee8a90df613eb517aadbecebd70f168913d30
46626 Author: Stefan Roese <sr@denx.de>
46627 Date: Fri Oct 5 07:57:20 2007 +0200
46629 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
46631 128MB seems to be the smallest possible value for the memory size
46632 for on PCIe port. With this change now the BAR's of the PCIe cards
46633 are accessible under U-Boot.
46635 One big note: This only works for PCIe port 0 & 1. For port 2 this
46636 currently doesn't work, since the base address is now 0xc0000000
46637 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
46638 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
46639 to change the base addresses completely and this change would have
46640 too much impact right now.
46642 This patch adds debug output to the 4xx pcie driver too.
46644 Signed-off-by: Stefan Roese <sr@denx.de>
46646 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
46647 Author: Stefan Roese <sr@denx.de>
46648 Date: Wed Oct 3 21:16:32 2007 +0200
46650 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
46652 Signed-off-by: Stefan Roese <sr@denx.de>
46654 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
46655 Author: Stefan Roese <sr@denx.de>
46656 Date: Wed Oct 3 15:01:02 2007 +0200
46658 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
46660 These files were introduced with the IBM 405GP but are currently used on all
46661 4xx PPC platforms. So the name doesn't match the content anymore. This patch
46662 renames the files to 4xx_pci.c/h.
46664 Signed-off-by: Stefan Roese <sr@denx.de>
46666 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
46667 Author: Stefan Roese <sr@denx.de>
46668 Date: Wed Oct 3 14:14:58 2007 +0200
46670 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
46672 Signed-off-by: Stefan Roese <sr@denx.de>
46674 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
46675 Author: Stefan Roese <sr@denx.de>
46676 Date: Wed Oct 3 10:38:09 2007 +0200
46678 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
46680 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
46681 the SDR registers of the PCIe ports. This makes the overall design
46682 clearer, since it removed a lot of switch statements which are not
46685 Also, the functions ppc4xx_init_pcie_rootport() and
46686 ppc4xx_init_pcie_entport() are merged into a single function
46687 ppc4xx_init_pcie_port(), since most of the code was duplicated.
46688 This makes maintainance and porting to other 4xx platforms
46691 Signed-off-by: Stefan Roese <sr@denx.de>
46693 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
46694 Author: Stefan Roese <sr@denx.de>
46695 Date: Wed Oct 3 07:48:09 2007 +0200
46697 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
46699 This patch is the first patch of a series to make the 440SPe PCIe code
46700 usable on different 4xx PPC platforms. In preperation for the new 405EX
46701 which is also equipped with PCIe interfaces.
46703 (2) This patch renames the functions from 440spe_ to 4xx_ with a
46704 little additional cleanup
46706 Signed-off-by: Stefan Roese <sr@denx.de>
46708 commit c7c6da23028f146d912514b95aefa3da7cf37699
46709 Author: Stefan Roese <sr@denx.de>
46710 Date: Wed Oct 3 07:34:10 2007 +0200
46712 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
46714 This patch is the first patch of a series to make the 440SPe PCIe code
46715 usable on different 4xx PPC platforms. In preperation for the new 405EX
46716 which is also equipped with PCIe interfaces.
46718 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
46720 Signed-off-by: Stefan Roese <sr@denx.de>
46722 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
46723 Author: Marian Balakowicz <m8@semihalf.com>
46724 Date: Wed Oct 24 01:37:36 2007 +0200
46726 TQM5200: Call usb_cpu_init() during board init
46728 usb_cpu_init() configures GPS USB pins, clocks, etc. and
46729 is required for proper operation of kernel USB subsystem.
46730 This setup was previously done in the kernel by the fixup
46731 code which is being removed, thus low level init must be
46732 done by U-boot now.
46734 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
46735 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
46737 commit b5af773f8d92677e06f3295b45557c9d0a487c24
46738 Author: Zhang Wei <wei.zhang@freescale.com>
46739 Date: Thu Oct 25 17:51:27 2007 +0800
46741 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
46743 The scan code of the key 'z' is 0x1d, which should be handled.
46745 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
46748 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
46749 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
46751 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
46752 Author: Rodolfo Giometti <giometti@enneenne.com>
46753 Date: Mon Oct 15 11:59:17 2007 +0200
46755 PXA USB OHCI: "usb stop" implementation.
46757 Some USB keys need to be switched off before loading the kernel
46758 otherwise they can remain in an undefined status which prevents them
46759 to be correctly recognized by the kernel.
46761 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
46762 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
46764 commit 31548249decf18a6b877a18436b6139dd483fe4a
46765 Author: Justin Flammia <jflammia@savantav.com>
46766 Date: Mon Oct 29 17:40:35 2007 -0400
46770 This is a multi-part message in MIME format.
46772 commit e6e505eae94ed721e123e177489291fc4544b7b8
46773 Author: Justin Flammia <jflammia@savantav.com>
46774 Date: Mon Oct 29 17:19:03 2007 -0400
46776 Found a bug in the way the DHCP Request packet is built, where the IP address
46777 that is offered by the server is bound to prematurely. This patch is a fix of
46778 that bug where the IP address offered by the DHCP server is not used until
46779 after the DHCP ACK from the server is received.
46781 Signed-off-by: Justin Flammia <jflammia@savantav.com>
46782 Signed-off-by: Ben Warren <bwarren@qstreams.com>
46784 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
46785 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46786 Date: Thu Oct 25 17:16:22 2007 -0500
46788 ColdFire 54455: Fix correct boot location for atmel and intel
46790 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46792 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
46793 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46794 Date: Thu Oct 25 17:14:00 2007 -0500
46796 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
46798 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46800 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
46801 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46802 Date: Thu Oct 25 17:12:36 2007 -0500
46804 ColdFire 5329: Assign correct SDRAM size and fix cache
46806 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46808 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
46809 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46810 Date: Thu Oct 25 17:10:23 2007 -0500
46812 ColdFire 5253: Assign correct SDRAM size
46814 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46816 commit 2acefa72ee0026f862ab65597ca687428f63a973
46817 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46818 Date: Thu Oct 25 17:09:17 2007 -0500
46820 ColdFire 5282: Fix external flash boot and return dramsize
46822 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46824 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
46825 Author: Bartlomiej Sieka <tur@semihalf.com>
46826 Date: Thu Oct 25 17:20:01 2007 +0200
46828 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
46830 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
46832 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
46833 Author: Martin Krause <martin.krause@tqs.de>
46834 Date: Wed Oct 24 08:42:25 2007 +0200
46836 TQM5200: fix spurious characters on second serial interface
46838 With this patch PSC3 is configured as UART. This is done, because if
46839 the pins of PSC3 are not configured at all (-> all pins are GPI),
46840 due to crosstalk, spurious characters may be send over the RX232_2_TXD
46843 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46844 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46846 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
46847 Author: Martin Krause <martin.krause@tqs.de>
46848 Date: Wed Oct 24 08:41:27 2007 +0200
46850 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
46852 Some commands for the STK52xx base board try to access the SM501 grafic
46853 controller. But the TQM5200S has no grafic controller (only the TQM5200
46854 and the TQM5200B have). This patch deactivates the commands accessing
46855 the SM501 for the TQM5200S.
46857 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46858 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46860 commit b31f64343ead9482cd439b1adbe4c34026a641b1
46861 Author: Martin Krause <martin.krause@tqs.de>
46862 Date: Mon Oct 22 16:45:53 2007 +0200
46864 TQM5200: fix spurious characters on second serial interface
46866 With this patch PSC3 is configured as UART. This is done, because if
46867 the pins of PSC3 are not configured at all (-> all pins are GPI),
46868 due to crosstalk, spurious characters may be send over the RX232_2_TXD
46871 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46873 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
46874 Author: Martin Krause <martin.krause@tqs.de>
46875 Date: Mon Oct 22 16:40:06 2007 +0200
46877 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
46879 Some commands for the STK52xx base board try to access the SM501 grafic
46880 controller. But the TQM5200S has no grafic controller (only the TQM5200
46881 and the TQM5200B have). This patch deactivates the commands accessing
46882 the SM501 for the TQM5200S.
46884 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46886 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
46887 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46888 Date: Sun Oct 21 09:14:28 2007 +0200
46890 Mips: Fix string functions differ prototype declaration
46892 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46894 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
46895 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46896 Date: Fri Oct 19 17:51:40 2007 -0500
46898 fsl_pci_init enable COMMAND_MEMORY if inbound window
46900 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
46901 to pciauto_setup_device has the side effect of not getting
46902 COMMAND_MEMORY set.
46904 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46906 commit e9d0d527992566ebef9826962ff1745b2f082b92
46907 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46908 Date: Fri Oct 19 10:55:24 2007 +0200
46910 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
46912 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46914 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
46915 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46916 Date: Fri Oct 19 08:10:15 2007 +0200
46918 fix warning: no return statement in function returning non-void
46920 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46922 commit e78220f6e514206757acfe247297fc9a328a881f
46923 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46924 Date: Fri Oct 19 06:33:45 2007 +0200
46926 xsengine: Fix no partition type specified, use DOS as default
46928 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46930 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
46931 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46932 Date: Fri Oct 19 00:24:59 2007 +0200
46934 lubbock: Fix no partition type specified, use DOS as default
46936 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46938 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
46939 Author: Wolfgang Denk <wd@denx.de>
46940 Date: Tue Oct 23 16:50:03 2007 +0200
46942 Coding style: keep lists sorted; update CHANGELOG
46944 Signed-off-by: Wolfgang Denk <wd@denx.de>
46946 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
46947 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46948 Date: Fri Oct 19 00:09:05 2007 +0200
46950 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
46952 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46954 commit 96455bfebc9887837095c9051d216f53c61b5f10
46955 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46956 Date: Fri Oct 19 00:07:39 2007 +0200
46958 Fix warning differ in signedness in board/innokom/innokom.c
46960 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46962 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
46963 Author: Marcel Ziswiler <marcel@ziswiler.com>
46964 Date: Fri Oct 19 00:25:33 2007 +0200
46966 fix pxa255_idp board
46968 The pxa255_idp being an old unmaintained board showed several issues:
46969 1. CONFIG_INIT_CRITICAL was still defined.
46970 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
46971 3. Symbol flash_addr was undeclared.
46972 4. The boards lowlevel_init function was still called memsetup.
46973 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
46974 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
46975 'target CPU does not support interworking' warnings on recent compilers.
46976 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
46977 indexes rather than the register definitions from the pxa-regs header
46978 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
46979 avoid any ambiguities.
46980 8. There were several redefinition warnings concerning ICMR, OSMR3,
46981 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
46982 9. The board configuration file was rather outdated.
46983 10. The part header file defined the vendor, product and revision arrays
46984 as unsigned chars instead of just chars in the block_dev_desc_t
46987 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
46989 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
46990 Author: Rune Torgersen <runet@innovsys.com>
46991 Date: Wed Oct 17 11:56:31 2007 -0500
46993 Make MPC8266ADS command selection more robust
46995 Fix MPC8266 command line definition so it won't break when new commands
46996 are added to u-boot.
46997 Signed-off-by Rune Torgersen <runet@innovsys.com>
46999 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
47000 Author: Bartlomiej Sieka <tur@semihalf.com>
47001 Date: Tue Oct 23 13:14:10 2007 +0200
47003 Motion-PRO: Update configuration to accomodate next generation board.
47005 New board has faster oscillator and a different Flash chip. This affects:
47006 - CFG_MPC5XXX_CLKIN
47008 - Flash CS configuration (timings)
47009 - Flash sector size, and thus MTD partition layout
47010 - malloc() arena size (due to bigger Flash sectors)
47011 - smaller memory test range (due to bigger malloc() arena)
47013 This patch also enables more extensive memory testing via "mtest".
47015 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
47017 commit eff501904df2bf1724a750062628ba2c51dbb1f8
47018 Author: Bartlomiej Sieka <tur@semihalf.com>
47019 Date: Tue Oct 23 11:36:07 2007 +0200
47021 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
47023 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
47024 register must be written a value of 0x00000004 as the first step of the
47025 SDRAM contorller configuration.
47027 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
47029 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
47030 Author: Peter Pearse <peter.pearse@arm.com>
47031 Date: Tue Oct 23 10:22:16 2007 +0100
47033 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
47035 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
47036 Author: Stefan Roese <sr@denx.de>
47037 Date: Tue Oct 23 10:17:42 2007 +0200
47039 ppc4xx: lwmon5: Some further GPIO config changes
47041 Signed-off-by: Stefan Roese <sr@denx.de>
47043 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
47044 Author: Vlad Lungu <vlad@comsys.ro>
47045 Date: Sun Oct 21 22:10:10 2007 +0900
47047 [MIPS] Fix UNCACHED_SDRAM
47049 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
47051 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
47052 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47054 commit 00101dd7a32d12f698150123e47e4b3420279f86
47055 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47056 Date: Sun Oct 21 21:30:42 2007 +0900
47058 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
47060 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47062 commit eb700636db017d310edaeb559b13d82588560674
47063 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47064 Date: Sun Oct 21 10:55:37 2007 +0900
47066 [MIPS] u-boot.lds: Define _gp in a standard manner
47068 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47070 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
47071 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47072 Date: Sun Oct 21 10:55:36 2007 +0900
47074 [MIPS] Fix $gp usage
47076 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
47077 As a general principle, we should use _gp for $gp.
47079 Thanks to linker script's help we fortunately have _gp which equals to
47080 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
47081 be able to access to GOT entires, global variables and procedure entry
47082 points. The right thing to do is to use _gp.
47084 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
47085 which holds the offset from _gp. When updating GOT entries, we use this
47086 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
47088 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
47089 I made some change to leave over num_got_entries.
47091 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47092 Cc: Vlad Lungu <vlad@comsys.ro>
47094 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
47095 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47096 Date: Sun Oct 21 10:55:36 2007 +0900
47098 [MIPS] u-boot.lds: Fix __got_start and __got_end
47100 Ensure that __got_start points to top of the `.got', and __got_end points
47101 to bottom as well, so that we never fail to count num_got_entries.
47103 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47105 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
47106 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47107 Date: Sun Oct 21 10:55:36 2007 +0900
47109 [MIPS] u-boot.lds: Remove duplicated .sdata section
47111 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47113 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
47114 Author: Wolfgang Denk <wd@denx.de>
47115 Date: Sun Oct 21 01:01:17 2007 +0200
47117 Minor coding style cleanup; update CHANGELOG
47119 Signed-off-by: Wolfgang Denk <wd@denx.de>
47121 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
47122 Author: Vlad Lungu <vlad@comsys.ro>
47123 Date: Thu Oct 4 20:47:10 2007 +0300
47127 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
47128 to do anything in eth_stop() if eth_init() was not called.
47129 Simplified RX path in order to avoid timeouts on really really
47130 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
47131 clever enough to cope with 1 packet per eth_rx().
47133 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
47135 commit df90968b48fb34fa9072fab150db2ac89678f537
47136 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
47137 Date: Mon Sep 24 13:32:13 2007 -0400
47139 Setting MSR[DE] in do_reset
47142 This patch ensures the soft reset of the board for the 85xx boards
47143 by setting the MSR[DE] in the do_reset function.
47145 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
47147 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
47148 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
47149 Date: Mon Sep 24 13:36:01 2007 -0400
47154 This patch fixes the MSR overwrite in the start.S when moving out of
47157 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
47159 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
47160 Author: Dan Wilson <dwilson@fulcrummicro.com>
47161 Date: Fri Oct 19 11:33:48 2007 -0500
47163 tsec driver should clear RHALT on startup
47165 This was causing problems for some people.
47167 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
47168 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
47169 Signed-off-by: Andy Fleming <afleming@freescale.com>
47171 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
47172 Author: Kumar Gala <galak@kernel.crashing.org>
47173 Date: Thu Oct 11 00:29:18 2007 -0500
47175 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
47177 On the MPC85xx CDS we have two issues:
47179 1. The device tree fixup code did not check to see if the property we are
47180 trying to update is actually found. Its possible that it would update
47181 random memory starting at 0.
47183 2. Newer Linux kernel's have moved the location of the PCI nodes to be
47184 sibilings of the soc node and not children. The explicit PATH to the PCI
47185 node would not be found for these device trees. Add the ability to handle
47186 both paths. In the future we shouldn't handle such fixups by explicit path.
47188 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
47190 commit a3063eec775719b7e91023bbec3f64b3118791df
47191 Author: Kumar Gala <galak@kernel.crashing.org>
47192 Date: Thu Oct 11 00:18:48 2007 -0500
47194 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
47196 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
47197 console. Make it so we match that config what we tell Linux as the early
47200 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
47202 commit e1ce3cb617bb06f91f82f98915391175addf3e82
47203 Author: Kumar Gala <galak@kernel.crashing.org>
47204 Date: Tue Oct 2 11:12:27 2007 -0500
47206 Remove magic numbers from cache related operations for mpc85xx
47208 The mpc85xx start code uses some magic numbers that we actually
47209 have #defines for in <config.h> so use those instead.
47211 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
47213 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
47214 Author: Detlev Zundel <dzu@denx.de>
47215 Date: Fri Oct 19 16:47:26 2007 +0200
47219 Signed-off-by: Detlev Zundel <dzu@denx.de>
47221 commit 281df457c1aa50d2752165d0c5c3282d4027b974
47222 Author: Tony Li <tony.li@freescale.com>
47223 Date: Thu Oct 18 17:47:19 2007 +0800
47225 mpc83xx: Add configure entry for MPC83xx ATM support
47227 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
47228 Makfile and MAKEALL
47230 Signed-off-by: Tony Li <tony.li@freescale.com>
47231 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
47233 commit d2646554f529a9577515eceb0ec5eceee18244ba
47234 Author: Tony Li <tony.li@freescale.com>
47235 Date: Thu Oct 18 17:44:38 2007 +0800
47237 mpc83xx: pq-mds-pib.c typo error
47239 Correct to val8 from val.
47241 Signed-off-by: Tony Li <tony.li@freescale.com>
47242 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
47244 commit 3e11ae80fec1ee12194940955431186abf6009c2
47245 Author: Stefan Roese <sr@denx.de>
47246 Date: Wed Oct 17 15:40:19 2007 +0200
47248 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
47250 Signed-off-by: Stefan Roese <sr@denx.de>
47252 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
47253 Author: Jon Loeliger <jdl@freescale.com>
47254 Date: Tue Oct 16 15:27:43 2007 -0500
47256 Initial mpc8610hpcd Makefile files.
47258 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47259 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
47260 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
47261 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47263 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
47264 Author: Jon Loeliger <jdl@freescale.com>
47265 Date: Tue Oct 16 15:26:51 2007 -0500
47267 Initial mpc8610hpcd cpu/, README and include/ files.
47269 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47270 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
47271 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
47272 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47274 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
47275 Author: Jon Loeliger <jdl@freescale.com>
47276 Date: Tue Oct 16 13:54:01 2007 -0500
47278 Initial mpc8610hpcd board files.
47280 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47281 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
47282 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
47283 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47285 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
47286 Author: runet@innovsys.com <runet@innovsys.com>
47287 Date: Tue Oct 16 14:50:40 2007 -0500
47289 Make MPC8266ADS board compile again.
47291 Signed-off-by: Runet Torgersen <runet@innovsys.com>
47293 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
47294 Author: Jon Loeliger <jdl@freescale.com>
47295 Date: Mon Aug 27 12:41:03 2007 -0500
47297 86xx: Allow for fewer DDR slots per memory controller.
47299 As a direct correlation exists between DDR DIMM slots
47300 and SPD EEPROM addresses used to configure them, use
47301 the individually defined SPD_EEPROM_ADDRESS* values to
47302 determine if a DDR DIMM slot should have its SPD
47303 configuration read or not.
47305 Effectively, this now allows for 1 or 2 DIMM slots
47306 per memory controller.
47308 Signed-off-by: Jon Loeliger <jdl@freescale.com>
47310 commit 4d4a945e189a2f384c66432316da2788a0ac1607
47311 Author: Rodolfo Giometti <giometti@enneenne.com>
47312 Date: Mon Oct 15 11:59:17 2007 +0200
47314 PXA USB OHCI: "usb stop" implementation.
47316 Some USB keys need to be switched off before loading the kernel
47317 otherwise they can remain in an undefined status which prevents them
47318 to be correctly recognized by the kernel.
47320 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
47322 commit e2e93442e558cf1500e92861f99713b2f045ea22
47323 Author: Stefan Roese <sr@denx.de>
47324 Date: Mon Oct 15 11:39:00 2007 +0200
47326 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
47328 The I2C bootstrap values that can be setup via the "bootstrap" command,
47329 were setup incorrect regarding the generation of the internal sync PCI
47330 clock. The values for PLB clock == 133MHz were slighly incorrect and the
47331 values for PLB clock == 166MHz were totally incorrect. This could
47332 lead to a hangup upon booting while PCI configuration scan.
47334 This patch fixes this issue and configures valid PCI divisor values
47335 for the sync PCI clock, with respect to the provided external async
47338 Here the values of the formula in the chapter 14.2 "PCI clocking"
47339 from the 440EPx users manual:
47341 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
47343 33MHz async PCI frequency:
47345 => 32 <= 44.3 <= 65 (div = 3)
47348 => 32 <= 55.3 <= 65 (div = 3)
47350 66MHz async PCI frequency:
47352 => 65 <= 66.5 <= 132 (div = 2)
47355 => 65 <= 83 <= 132 (div = 2)
47357 Signed-off-by: Stefan Roese <sr@denx.de>
47359 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
47360 Author: Stefan Roese <sr@denx.de>
47361 Date: Mon Oct 15 11:29:33 2007 +0200
47363 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
47365 The BCSR status bit for the 66MHz PCI operation was correctly
47366 addressed (MSB/LSB problem). Now the correct currently setup
47367 PCI frequency is displayed upon bootup.
47369 This patch also fixes this problem on Rainier & Yellowstone, since these
47370 boards use the same souce code as Sequoia & Yosemite do.
47372 Signed-off-by: Stefan Roese <sr@denx.de>
47374 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
47375 Author: Martin Krause <martin.krause@tqs.de>
47376 Date: Wed Sep 26 17:55:56 2007 +0200
47378 TQM860M: adjust for doubled flash sector size.
47380 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
47381 doubled sector size.
47383 Signed-off-by: Martin Krause <martin.krause@tqs.de>
47385 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
47386 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
47387 Date: Wed Sep 26 17:55:54 2007 +0200
47389 TQM8xx: Fix CAN timing.
47391 Signed-off-by: Martin Krause <martin.krause@tqs.de>
47393 commit d43e489baf02afae49077791fb22332d240d8656
47394 Author: Martin Krause <martin.krause@tqs.de>
47395 Date: Thu Sep 27 14:54:36 2007 +0200
47397 TQM866M: fix SDRAM refresh
47399 At 133 MHz the current SDRAM refresh rate is too fast
47400 (measured 4 * 1.17 us).
47401 CFG_MAMR_PTA changes from 39 to 97. This result
47402 in a refresh rate of 4 * 7.8 us at the default clock
47403 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
47404 This is a compromise until a new method is found to
47405 adjust the refresh rate.
47407 Signed-off-by: Martin Krause <martin.krause@tqs.de>
47409 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
47410 Author: Martin Krause <martin.krause@tqs.de>
47411 Date: Wed Sep 26 17:55:55 2007 +0200
47413 TQM866M: adjust for doubled flash sector size.
47415 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
47416 doubled sector size.
47418 Signed-off-by: Martin Krause <martin.krause@tqs.de>
47420 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
47421 Author: Michal Simek <monstr@monstr.eu>
47422 Date: Sun Oct 14 16:12:29 2007 +0200
47424 [FIX] XUPV2P change command handling
47425 and remove code violation
47427 commit 636400198228d96983c06657b17f760f5989958e
47428 Author: Wolfgang Denk <wd@denx.de>
47429 Date: Sun Oct 14 00:13:19 2007 +0200
47431 Prepare for 1.3.0-rc3 release
47433 Signed-off-by: Wolfgang Denk <wd@denx.de>
47435 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
47436 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
47437 Date: Sat Sep 29 13:41:37 2007 +0200
47439 Fix warning differ in signedness in cpu/pxa/mmc.c
47441 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
47443 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
47444 Author: Wolfgang Denk <wd@denx.de>
47445 Date: Sat Oct 13 23:51:14 2007 +0200
47447 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
47449 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
47450 Signed-off-by: Wolfgang Denk <wd@denx.de>
47452 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
47453 Author: Wolfgang Denk <wd@denx.de>
47454 Date: Sat Oct 13 21:15:39 2007 +0200
47456 Coding Style cleanup.
47458 Signed-off-by: Wolfgang Denk <wd@denx.de>
47460 commit e1893815b0999410d7a327589611c7b38e95299e
47461 Author: Wolfgang Denk <wd@denx.de>
47462 Date: Fri Oct 12 15:49:39 2007 +0200
47464 GP3 SSA: enable RTC
47466 Signed-off-by: Wolfgang Denk <wd@denx.de>
47468 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
47469 Author: Grzegorz Bernacki <gjb@semihalf.com>
47470 Date: Tue Oct 9 13:58:24 2007 +0200
47472 [ads5121] EEPROM support added.
47474 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47476 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
47477 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
47478 Date: Sat Oct 6 18:55:35 2007 +0200
47480 AVR32: Initialize bi_flash* in board_init_r
47482 The ATSTK1000-specific flash driver intializes bi_flashstart,
47483 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
47486 Initialize these in board_init_r instead so that things will still be
47487 set up correctly when we switch to the CFI driver.
47489 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47491 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
47492 Author: Marian Balakowicz <m8@semihalf.com>
47493 Date: Fri Oct 5 10:40:54 2007 +0200
47495 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
47497 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
47499 commit 92869195ef8210758d2176230c0a36897afd50ed
47500 Author: Bartlomiej Sieka <tur@semihalf.com>
47501 Date: Fri Oct 5 09:46:06 2007 +0200
47503 CM5200: Fix missing null-termination in hostname manipulation code
47505 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
47507 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
47508 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
47509 Date: Tue Oct 2 19:09:01 2007 +0200
47511 Fix memtest breakage
47513 CFG_MEMTEST_START uses weird magic involving gd, which fails to
47514 compile. Use hardcoded values instead (we actually know how much RAM
47517 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47519 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
47520 Author: Stefan Roese <sr@denx.de>
47521 Date: Tue Oct 2 11:44:46 2007 +0200
47523 ppc4xx: Coding style cleanup
47525 Signed-off-by: Stefan Roese <sr@denx.de>
47527 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
47528 Author: Stefan Roese <sr@denx.de>
47529 Date: Tue Oct 2 11:44:19 2007 +0200
47531 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
47533 Signed-off-by: Stefan Roese <sr@denx.de>
47535 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
47536 Author: Grzegorz Bernacki <gjb@semihalf.com>
47537 Date: Mon Oct 1 09:51:50 2007 +0200
47539 Program EPLD to force full duplex mode for PHY.
47541 EPLD forces modes of PHY operation. By default full duplex is turned off.
47542 This fix turns it on.
47544 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47546 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
47547 Author: Timo Ketola <timo.ketola@exertus.fi>
47548 Date: Mon Sep 24 14:50:32 2007 +0300
47550 Bugfix: Use only one PTD for one endpoint
47552 Original isp116x-hcd code prepared multiple PTDs for longer than 16
47553 byte transfers for one endpoint. That is unnecessary because the
47554 ISP116x is able to split long data from one PTD into multiple
47555 transactions based on the buffer size of the endpoint. It also caused
47556 serious problems if the endpoint NAKed some of the transactions. In
47557 that case ISP116x wouldn't notice that the other PTDs were for the same
47558 endpoint and would try the other PTDs possibly out of order. That would
47559 break the whole transfer.
47561 This patch makes isp116x_submit_job to use one PTD for one transfer.
47563 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
47564 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
47566 commit 86ec86c04326c3913178a7679aa910de071da75d
47567 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
47568 Date: Thu Sep 27 23:27:47 2007 +0200
47570 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
47572 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
47574 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
47575 Author: Stefan Roese <sr@denx.de>
47576 Date: Tue Sep 11 14:12:55 2007 +0200
47578 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
47580 Signed-off-by: Stefan Roese <sr@denx.de>
47582 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
47583 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
47584 Date: Wed Sep 26 16:35:54 2007 -0500
47586 85xx io out functions need sync after write.
47588 This fixes the mc146818 rtc_read/write functions for 85xx.
47590 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47592 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
47593 Author: Grant Likely <grant.likely@secretlab.ca>
47594 Date: Tue Sep 25 15:48:05 2007 -0600
47596 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
47598 CFG_FPGA_XILINX is a bit value used to test against the value in
47599 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
47600 think that is the intention in this code.
47602 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47604 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
47605 Author: Michal Simek <monstr@monstr.eu>
47606 Date: Mon Sep 24 00:41:30 2007 +0200
47608 [FIX] change command handling and removing code violation
47610 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
47611 Author: Michal Simek <monstr@monstr.eu>
47612 Date: Mon Sep 24 00:36:06 2007 +0200
47614 [FIX] change sets of commands
47615 because changing of command handling brings
47616 compilation problems
47618 commit cb1bc63b75a232571eb69aa2c8aa919321655845
47619 Author: Michal Simek <monstr@monstr.eu>
47620 Date: Mon Sep 24 00:30:42 2007 +0200
47622 [FIX] Email reparation & Copyright
47623 Both codes are written by myself without any
47626 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
47627 Author: Michal Simek <monstr@monstr.eu>
47628 Date: Mon Sep 24 00:25:11 2007 +0200
47630 [PATCH] Change macro name for UartLite
47631 because PowerPC 405 can use UartLite as console
47633 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
47634 Author: Michal Simek <monstr@monstr.eu>
47635 Date: Mon Sep 24 00:21:19 2007 +0200
47637 [PATCH] Add support for design without interrupt controller
47640 commit 0731933ec8ec45d02ba89b52df673d526873cdde
47641 Author: Michal Simek <monstr@monstr.eu>
47642 Date: Mon Sep 24 00:19:48 2007 +0200
47644 [FIX] resolve problem with cpu without barrel shifter
47646 commit db14d77995ce515b728b178b63f82babe60e3d56
47647 Author: Michal Simek <monstr@monstr.eu>
47648 Date: Mon Sep 24 00:18:46 2007 +0200
47650 [FIX] repair email address
47652 commit 481d4328618804add1f818a6c96296121cd0528e
47653 Author: Michal Simek <monstr@monstr.eu>
47654 Date: Mon Sep 24 00:17:42 2007 +0200
47656 [FIX] repair MFSL commands
47658 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
47659 Author: Michal Simek <monstr@monstr.eu>
47660 Date: Mon Sep 24 00:08:37 2007 +0200
47662 synchronizition with mainline
47664 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
47665 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47666 Date: Sun Sep 23 02:42:38 2007 +0900
47668 sh: Add support command of ide with sh
47670 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47672 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
47673 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47674 Date: Sun Sep 23 02:38:42 2007 +0900
47676 sh: Update Makefile
47678 Add support MS7722SE01 to Makefile.
47680 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47682 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
47683 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47684 Date: Sun Sep 23 02:31:13 2007 +0900
47686 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
47688 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47690 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
47691 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47692 Date: Sun Sep 23 02:19:24 2007 +0900
47694 sh: Update MS7750SE01 platform
47696 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47698 commit 516ad760db3553766267ada01b7d5d727faa4bbd
47699 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47700 Date: Sun Sep 23 02:17:08 2007 +0900
47702 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
47704 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47706 commit b02bad128669e567fce87d8df823b06a0144b8db
47707 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47708 Date: Sun Sep 23 02:12:30 2007 +0900
47710 sh: Update core code of SuperH.
47712 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
47714 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
47715 Author: Wolfgang Denk <wd@denx.de>
47716 Date: Thu Sep 20 00:04:14 2007 +0200
47720 Signed-off-by: Wolfgang Denk <wd@denx.de>
47722 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
47723 Author: Wolfgang Denk <wd@denx.de>
47724 Date: Tue Sep 18 21:36:35 2007 +0200
47726 Avoid compiler warning.
47728 Signed-off-by: Wolfgang Denk <wd@denx.de>
47730 commit 8a783a65851bc7421ab69f442261215e21b8891a
47731 Author: Grant Likely <grant.likely@secretlab.ca>
47732 Date: Tue Sep 18 12:24:57 2007 -0600
47734 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
47736 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
47737 nulls in a string differently. For example, the following statement:
47738 echo "this is a string\0" > afile
47739 Will produce the following with /bin/bash:
47740 "this is a string\0"
47741 But with /bin/dash, will produce:
47744 Bug fixed by moving the embedded null out of the makefile and into the
47745 config header. Also renamed the macro to avoid usage colision with the same
47746 macro used by other board ports.
47748 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47750 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
47751 Author: Wolfgang Denk <wd@denx.de>
47752 Date: Tue Sep 18 17:40:27 2007 +0200
47754 MCC200: fix build warning
47756 The MCC200 board config file includes version.h for some customer-
47757 specific setting, which causes warnings with "make depend"; build
47758 version.h before depend.
47760 Signed-off-by: Wolfgang Denk <wd@denx.de>
47762 commit bd86220f58b99d6896198c385fda132f0c980915
47763 Author: Peter Pearse <peter.pearse@arm.com>
47764 Date: Tue Sep 18 13:07:54 2007 +0100
47766 Move coloured led API to status_led.h
47767 Improve indentation in drivers/at45.c
47769 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
47770 Author: Eirik Aanonsen <eaa@wprmedical.com>
47771 Date: Tue Sep 18 08:47:20 2007 +0200
47773 Update atstk1002 bootargs.
47775 Updates to atstk1002 U-Boot header file:
47776 - Changed bootargs:
47777 * Set the bootargs for at1002 to point to the SD-card partition instead
47778 * ... of the boot flash.
47779 * Removing the rootfstype since that argument are not needed.
47781 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
47782 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47784 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
47785 Author: Eirik Aanonsen <eaa@wprmedical.com>
47786 Date: Wed Sep 12 13:32:37 2007 +0200
47788 Add some comments to clocks in atstk1002.h
47790 This patch applies some clarifying comments to how the different
47791 clocks are setup according to atstk1002.h Some of the previous
47792 comments where stating wrongful information.
47794 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47796 commit 97213f32416ead885deafea86774e912ffd60ad0
47797 Author: David Saada <David.Saada@ecitele.com>
47798 Date: Mon Sep 17 17:04:47 2007 +0200
47800 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
47802 Signed-off-by: David Saada <david.saada@ecitele.com>
47804 commit 30363e98fa470fbecea5e8bc0f1443352754f303
47805 Author: Stefan Roese <sr@denx.de>
47806 Date: Mon Sep 17 08:20:47 2007 +0200
47808 Small whitespace cleanup of OneNAND patch
47810 Signed-off-by: Stefan Roese <sr@denx.de>
47812 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
47813 Author: Kyungmin Park <kmpark@infradead.org>
47814 Date: Mon Sep 10 17:15:14 2007 +0900
47816 OneNAND support (take #2)
47818 [PATCH 3/3] OneNAND support (take #2)
47820 OneNAND support at U-Boot
47822 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47824 commit 17aa2800457df0c06b41516f46f126712c196219
47825 Author: Kyungmin Park <kmpark@infradead.org>
47826 Date: Mon Sep 10 17:14:34 2007 +0900
47828 OneNAND support (take #2)
47830 [PATCH 2/3] OneNAND support (take #2)
47832 OneNAND support at U-Boot
47834 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47836 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
47837 Author: Kyungmin Park <kmpark@infradead.org>
47838 Date: Mon Sep 10 17:13:49 2007 +0900
47840 OneNAND support (take #2)
47842 [PATCH 1/3] OneNAND support (take #2)
47844 OneNAND support at U-Boot
47846 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47848 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
47849 Author: Michal Simek <monstr@monstr.eu>
47850 Date: Sun Sep 16 20:51:57 2007 +0200
47852 [FIX] remove files form repository
47854 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
47855 Author: Wolfgang Denk <wd@denx.de>
47856 Date: Sun Sep 16 17:10:04 2007 +0200
47858 TQM8xx[LM]: Fix broken environment alignment.
47860 With recent toolchains, the environment sectors were no longer aligned to
47861 sector boundaries. The reason was a combination of two bugs:
47863 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
47864 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
47865 this gets defined, is not included here (and cannot be included
47866 without causing lots of problems).
47868 Added a new #define CFG_USE_PPCENV for all boards which really
47869 want to put the environment is a ".ppcenv" section.
47871 2) The linker scripts just include environment.o, silently assuming
47872 that the objects in that file are really in the order in which
47873 they are coded in the C file, i. e. "environment" first, then
47874 "redundand_environment", and "env_size" last. However, current
47875 toolchains (GCC-4.x) reorder the objects, causing the environment
47876 data not to start on a flash sector boundary:
47878 Instead of: we got:
47880 40008000 T environment 40008000 T env_size
47881 4000c000 T redundand_environment 40008004 T redundand_environment
47882 40010000 T env_size 4000c004 T environment
47884 Note: this patch fixes just the first part, and cures the alignment
47885 problem by making sure that "env_size" gets placed correctly. However,
47886 we still have a potential issue because primary and redundant
47887 environment sectors are actually swapped, i. e. we have now:
47889 40008000 T redundand_environment
47890 4000c000 T environment
47891 40010000 T env_size
47893 This shall be fixed in the next version.
47895 Signed-off-by: Wolfgang Denk <wd@denx.de>
47897 commit eb6da8050797c204c9d010548424186c7ce32fc1
47898 Author: Wolfgang Denk <wd@denx.de>
47899 Date: Sun Sep 16 02:39:35 2007 +0200
47901 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
47903 Signed-off-by: Wolfgang Denk <wd@denx.de>
47905 commit cd2d1602c54cc6957bdef3872272a4b264893960
47906 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
47907 Date: Mon Sep 10 14:54:56 2007 -0400
47911 Fixup for the break statement in wrong place.
47913 [Patch by urwithsughosh@gmail.com]
47914 Acked-by: Andy Fleming <afleming@freescale.com>
47915 Signed-off-by: Wolfgang Denk <wd@denx.de>
47917 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
47918 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47919 Date: Tue Sep 11 17:04:00 2007 +0200
47921 Fix do_div() usage in nand process output
47923 Fix usage of do_div() in nand erase|read|write process output.
47925 The last patch to nand_util.c introduced do_div() instead of libgcc's
47926 implementation. But do_div() returns the quotient in its first
47927 macro parameter and not as result.
47929 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47931 commit c750d2e6692a000a82f29de7bf24e3dc21239161
47932 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47933 Date: Wed Sep 12 12:36:53 2007 +0200
47935 NAND: Add CFG_NAND_QUIET option
47937 This config option sets the default for the progress information
47938 output behavior that can also be configured through the 'quiet'
47939 environment variable.
47941 The legacy NAND code does not print the current progress info
47942 on the console. So this option is for backward compatibility for
47943 units that are in the field and where setting the quiet variable
47944 is not an option. With CFG_NAND_QUIET set to '1' the console
47945 progress info is turned off. This can still be overwritten
47946 through the environment variable.
47948 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47950 commit dcb88630290d2bcd803386dd4c2be73142994c4f
47951 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
47952 Date: Thu Sep 13 16:06:05 2007 -0700
47954 ColdFire: fix build error becasue of bad type of mii_init()
47956 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
47958 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
47959 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
47960 Date: Thu Sep 13 16:04:05 2007 -0700
47962 ColdFire: Fix build error caused by pixis.c
47964 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
47966 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
47968 commit e21659e30660a1377c42af135a6114efe39801d9
47969 Author: Sam Sparks <SSparks@twacs.com>
47970 Date: Fri Sep 14 11:14:42 2007 -0600
47972 Update MPC8349ITX*_config to place config.tmp in right place.
47974 MPC834ITX*_config does not store config.tmp at the correct locatation,
47975 causing MPC8349ITXGP to have the wrong TEXT_BASE.
47977 Signed-off-by: Sam Sparks <SSparks@twacs.com>
47978 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47980 commit 1218abf1b5817a39a82399b4b928b00750575bda
47981 Author: Wolfgang Denk <wd@denx.de>
47982 Date: Sat Sep 15 20:48:41 2007 +0200
47984 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
47986 Signed-off-by: Wolfgang Denk <wd@denx.de>
47988 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
47989 Author: Dirk Behme <dirk.behme@googlemail.com>
47990 Date: Sat Sep 15 11:55:42 2007 +0200
47992 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
47994 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
47997 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
47999 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
48001 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
48002 Author: Michal Simek <monstr@monstr.eu>
48003 Date: Sat Sep 15 00:03:35 2007 +0200
48005 Synchronize with U-BOOT mainline
48007 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
48008 Author: Sam Sparks <SSparks@twacs.com>
48009 Date: Fri Sep 14 11:14:42 2007 -0600
48011 Update MPC8349ITX*_config to place config.tmp in right place.
48013 MPC834ITX*_config does not store config.tmp at the correct locatation,
48014 causing MPC8349ITXGP to have the wrong TEXT_BASE.
48016 Signed-off-by: Sam Sparks <SSparks@twacs.com>
48017 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
48018 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48020 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
48021 Author: Bartlomiej Sieka <tur@semihalf.com>
48022 Date: Thu Sep 13 18:21:48 2007 +0200
48024 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
48026 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
48028 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
48029 Author: Bartlomiej Sieka <tur@semihalf.com>
48030 Date: Thu Sep 13 16:33:59 2007 +0200
48032 tqm5200: Restore customary env. variable boot commands for powerpc kernels
48034 - update default definitions of kernel_addr and fdt_addr env. variables
48035 - make arch/powerpc booting the default scenario
48036 - update MTD partition layout to match the above
48038 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
48040 commit f34024d4a328e6edd906456da98d2c537155c4f7
48041 Author: Wolfgang Denk <wd@denx.de>
48042 Date: Wed Sep 12 00:48:57 2007 +0200
48044 Fix memory corruption problem on STX GP3 SSA Board.
48046 Signed-off-by: Wolfgang Denk <wd@denx.de>
48048 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
48049 Author: Peter Pearse <peter.pearse@arm.com>
48050 Date: Tue Sep 11 15:35:01 2007 +0100
48054 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
48055 Author: Grzegorz Bernacki <gjb@semihalf.com>
48056 Date: Tue Sep 11 15:42:11 2007 +0200
48058 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
48059 scan on second pci bus.
48061 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48063 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
48064 Author: Grzegorz Bernacki <gjb@semihalf.com>
48065 Date: Tue Sep 11 12:57:52 2007 +0200
48067 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
48069 Bamboo has a file sdram.c which needs special treatment when building in
48070 separate directory. It has to be linked to build directory otherwise it is
48073 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48075 commit d45963854eff39d575124d859419bb4953ce2c87
48076 Author: Michal Simek <monstr@monstr.eu>
48077 Date: Tue Sep 11 00:37:04 2007 +0200
48079 [FIX] Microblaze ML401 - repare FLASH handling
48081 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
48082 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
48083 Date: Mon Sep 10 16:55:59 2007 +0100
48085 Allocate CPU Architecture Code for STMicroelectronics' ST200.
48087 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
48088 ---------------------------------------------------
48090 commit 754bac48156f8958d8f6a53a51eda88ab5758929
48091 Author: Wolfgang Denk <wd@denx.de>
48092 Date: Mon Sep 10 20:42:31 2007 +0200
48094 Update version to match current state.
48096 Signed-off-by: Wolfgang Denk <wd@denx.de>
48098 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
48099 Author: Grzegorz Bernacki <gjb@semihalf.com>
48100 Date: Mon Sep 10 17:39:08 2007 +0200
48102 [MPC512x] Streamline frame handling in the FEC driver
48104 - convert frame size settings to be derived from a single base
48105 - set frame size to the recommended default value
48107 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48109 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
48110 Author: Kyungmin Park <kmpark@infradead.org>
48111 Date: Mon Sep 10 11:34:00 2007 +0900
48113 Remove compiler warning: target CPU does not support interworking
48115 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
48117 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
48118 Author: Wolfgang Denk <wd@denx.de>
48119 Date: Sun Sep 9 21:21:33 2007 +0200
48121 Fix compile error in spc1920 config.
48123 Signed-off-by: Markus Klotzbücher <mk@denx.de>
48124 Signed-off-by: Wolfgang Denk <wd@denx.de>
48126 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
48127 Author: Grant Likely <grant.likely@secretlab.ca>
48128 Date: Fri Sep 7 09:25:07 2007 -0600
48130 Bugfix: make bootm+libfdt compile on boards with no flash
48132 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
48134 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
48135 Author: Grzegorz Bernacki <gjb@semihalf.com>
48136 Date: Fri Sep 7 18:35:37 2007 +0200
48138 [PPC440SPe] PCIe environment settings for Katmai and Yucca
48140 - 'pciconfighost' is set by default in order to be able to scan bridges
48141 behind the primary host/PCIe
48143 - 'pciscandelay' env variable is recognized to allow for user-controlled
48144 delay before the PCIe bus enumeration; some peripheral devices require a
48145 significant delay before they can be scanned (e.g. LSI8408E); without the
48146 delay they are not detected
48148 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48150 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
48151 Author: Grzegorz Bernacki <gjb@semihalf.com>
48152 Date: Fri Sep 7 18:20:23 2007 +0200
48154 [PPC440SPe] Improve PCIe configuration space access
48156 - correct configuration space mapping
48157 - correct bus numbering
48158 - better access to config space
48160 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
48161 first device on the first bus. We now allow to configure up to 16 buses;
48162 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
48163 peripheral devices farther in hierarchy can be identified.
48165 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48167 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
48168 Author: Grzegorz Bernacki <gjb@semihalf.com>
48169 Date: Fri Sep 7 17:46:18 2007 +0200
48171 [PPC440SPe] Convert machine check exceptions handling
48173 Convert using fixup mechanism to suppressing MCK for the duration of config
48174 read/write transaction: while fixups work fine with the case of a precise
48175 exception, we identified a major drawback with this approach when there's
48176 an imprecise case. In this scenario there is the following race condition:
48177 the fixup is (by design) set to catch the instruction following the one
48178 actually causing the exception; if an interrupt (e.g. decrementer) happens
48179 between those two instructions, the ISR code is executed before the fixup
48180 handler the machine check is no longer protected by the fixup handler as it
48181 appears as within the ISR code. In consequence the fixup approach is being
48182 phased out and replaced with explicit suppressing of MCK during a PCIe
48183 config read/write cycle.
48185 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48187 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
48188 Author: Wolfgang Denk <wd@denx.de>
48189 Date: Fri Sep 7 17:43:36 2007 +0200
48191 Fix typo in MAKEALL script.
48193 Signed-off-by: Wolfgang Denk <wd@denx.de>
48195 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
48196 Author: Grzegorz Bernacki <gjb@semihalf.com>
48197 Date: Fri Sep 7 17:09:21 2007 +0200
48199 [MPC512x] Proper handling of larger frames in the FEC driver
48201 When frame larger than local RX buffer is received, it is split and handled
48202 by two buffer descriptors. Prior to this patch the FEC driver discarded
48203 contents of a buffer descriptor without the 'LAST' bit set, so the first
48204 part of the frame was lost in case of larger frames. This fix allows to
48205 safely combine the two pieces into the whole frame.
48207 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
48209 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
48210 Author: Rafal Jaworowski <raj@semihalf.com>
48211 Date: Fri Sep 7 17:05:36 2007 +0200
48213 [MPC512x] Correct fixup relocation
48215 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
48217 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
48218 Author: Wolfgang Denk <wd@denx.de>
48219 Date: Fri Sep 7 01:21:25 2007 +0200
48221 Update CHANGELOG, minor coding style cleanup.
48223 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
48224 Author: stefano babic <sbabic@denx.de>
48225 Date: Thu Aug 30 23:01:49 2007 +0200
48227 PXA270: Added support for TrizepsIV board.
48229 This patch add support for the Trizeps IV module (520Mhz).
48231 Signed-off-by: Stefano Babic <sbabic@denx.de>
48233 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
48234 Author: stefano babic <sbabic@denx.de>
48235 Date: Thu Aug 30 22:57:04 2007 +0200
48237 PXA270: Add support for multiple serial ports.
48239 This patch adds support for multiple serial ports to the PXA target.
48240 FFUART, BTUART and STUART are supported.
48242 Signed-off-by: Stefano Babic <sbabic@denx.de>
48244 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
48245 Author: stefano babic <sbabic@denx.de>
48246 Date: Thu Aug 30 22:48:47 2007 +0200
48248 PXA270: fix compile issue (invalid lvalue)
48250 Code is broken for PXA270 due to "invalid lvalue in assignment".
48252 This patch fix it in pxa-regs.h
48254 Signed-off-by: Stefano Babic <sbabic@denx.de>
48256 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
48257 Author: Jason Jin <Jason.jin@freescale.com>
48258 Date: Thu Aug 30 18:19:05 2007 +0800
48260 Add BUILD_DIR support for bios emulator.
48262 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
48264 commit b4d8a55145442f136982634862341a3e02002bda
48265 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48266 Date: Fri Aug 31 14:41:51 2007 +0900
48268 [MIPS] Remove inline asm string functions
48270 Stop using inline string functions on MIPS as other ARCHs do so,
48271 since the optimized inline asm versions are not small.
48273 This change is triggered by a following MIPS build error:
48274 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
48275 common/exports.c:32: undefined reference to `strcmp'
48276 make: *** [u-boot] Error 1
48278 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48280 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
48281 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48282 Date: Fri Aug 31 14:41:45 2007 +0900
48284 [MIPS] Update asm string header
48286 This patches contains several bugfixes and cleanups in the latest upstream:
48288 - Don't include linux/config.h
48289 - Remove buggy inline version of memscan.
48290 - Merge with Linux 2.6.11-rc3.
48291 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
48292 - Goodbye mips64. 31704 lines of code bite the dust.
48293 - Replace extern inline with static inline.
48294 - Fix return value of strncpy.
48295 - Remove a bunch more "$1" clobbers.
48297 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48299 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
48300 Author: Bartlomiej Sieka <tur@semihalf.com>
48301 Date: Tue Sep 4 17:31:22 2007 +0200
48303 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
48305 Fix incorrect blob address calculation in do_bootm_linux() that prevents
48306 booting the kernel from a multi-file image (kernel + initrd + blob).
48308 Also, make minor updates to the U-Boot's output and to the coding style.
48310 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
48312 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
48313 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
48314 Date: Fri Aug 31 14:29:04 2007 +0200
48316 Add support for Sil680 IDE controller.
48318 o add drivers/sil680.c to support the Sil680 IDE-controller.
48319 o drivers/Makefile: add sil680.o.
48321 Signed-off-by: Gary Jennejohn <garyj@denx.de>
48323 commit e79021223bc339df655e360645a52c457a74b067
48324 Author: Grant Likely <grant.likely@secretlab.ca>
48325 Date: Thu Sep 6 09:47:40 2007 -0600
48327 bootm/fdt: Only process the fdt if an fdt address was provided
48329 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
48330 kernels using the board info structure (instead of passing a device tree)
48331 This change allows the old style booting to be used if the fdt argument
48332 was not passed to 'bootm'.
48334 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
48335 Acked-by: Kim Phillips <kim.phillips@freescale.com>
48337 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
48338 Author: Grant Likely <grant.likely@secretlab.ca>
48339 Date: Thu Sep 6 09:46:23 2007 -0600
48341 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
48343 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
48345 Tested on: lite5200b
48347 Note: the fixup functions have not been moved to a common place. This
48348 patch is targeted for immediate merging as in solves a build issue, but
48349 the final name/location of the fixups is still subject to debate. I
48350 propose to merge this now, and move the fixups in the next merge window
48351 to be usable by all targets.
48353 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
48355 commit 41bb76e941929f54a73206fb132f7a4c275543a3
48356 Author: Grant Likely <grant.likely@secretlab.ca>
48357 Date: Thu Sep 6 09:46:17 2007 -0600
48359 libfdt: add convenience function fdt_find_and_setprop()
48361 Given the path to a node, fdt_find_and_setprop() allows a property value
48362 to be set directly.
48364 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
48366 commit 80767a6cead9990d9e77e62be947843c2c72f469
48367 Author: Peter Pearse <peter.pearse@arm.com>
48368 Date: Wed Sep 5 16:04:41 2007 +0100
48370 Changed API name to coloured_led.h
48371 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
48372 Tidied other cpu/arm920t/start.S code
48374 commit 56a9270521baaa00e12639a978302a67f61ef060
48375 Author: Kumar Gala <galak@kernel.crashing.org>
48376 Date: Thu Aug 30 16:18:18 2007 -0500
48378 Fix ULI RTC support on MPC8544 DS
48380 The RTC on the M1575 ULI chipset requires a dummy read before
48381 we are able to talk to the RTC. We accomplish this by adding a
48382 second memory region to the PHB the ULI is on and read from it.
48384 The second region is added to maintain compatiabilty with Linux's
48385 view of the PCI memory map.
48387 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
48389 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
48390 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48391 Date: Thu Aug 30 01:58:48 2007 -0500
48393 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
48395 pcie is now differentiated from pci. Add 8641 bus-range updates.
48397 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48399 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
48400 Author: Peter Pearse <peter.pearse@arm.com>
48401 Date: Tue Sep 4 16:18:38 2007 +0100
48403 Add coloured led interface for ARM boards.
48404 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
48406 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
48407 Author: Peter Pearse <peter.pearse@arm.com>
48408 Date: Tue Sep 4 14:49:28 2007 +0100
48410 Move include/led.h to board/at91rm9200dk
48412 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
48413 Author: Peter Pearse <peter.pearse@arm.com>
48414 Date: Tue Sep 4 14:25:51 2007 +0100
48416 Ran Lindent on drivers/at45.c
48418 commit 557ab89d294f08dd532f21d19861b40093200a33
48419 Author: Peter Pearse <peter.pearse@arm.com>
48420 Date: Tue Sep 4 14:23:50 2007 +0100
48422 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
48424 commit 81b73dec16fd1227369a191e725e10044a9d56b8
48425 Author: Gary Jennejohn <garyj@denx.de>
48426 Date: Fri Aug 31 15:21:46 2007 +0200
48428 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
48430 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
48431 set to non-zero, because it doesn't support MRM (memory-read-
48432 multiple) correctly. We now added the possibility to configure
48433 this register in the board config file, so that the default value
48434 of 8 can be overridden.
48436 Here the details of this patch:
48438 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
48439 board-specific settings. As an example the sequoia board requires 0.
48440 Idea from Stefan Roese <sr@denx.de>.
48441 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
48442 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
48443 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
48444 CFG_PCI_CACHE_LINE_SIZE to 0.
48446 Signed-off-by: Gary Jennejohn <garyj@denx.de>
48447 Signed-off-by: Stefan Roese <sr@denx.de>
48449 commit 60174746c668b309378a91488dded898e9553eae
48450 Author: Wolfgang Denk <wd@denx.de>
48451 Date: Fri Aug 31 10:01:51 2007 +0200
48453 Fix TFTP OACK code for short packets.
48455 The old code had a loop limit overflow bug which caused a semi-
48456 infinite loop for small packets, because in "i<len-8", "i" was signed,
48457 but "len" was unsigned, and "len-8" became a huge number for small
48460 This is a workaround which replaces broken commit 8f1bc284.
48462 Signed-off-by: Wolfgang Denk <wd@denx.de>
48464 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
48465 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
48466 Date: Thu Aug 30 15:03:05 2007 +0200
48468 Reduce BOOTDELAY variable to 1 second by default for STK1002
48470 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
48471 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
48473 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
48474 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
48475 Date: Thu Aug 30 15:03:04 2007 +0200
48477 Remove double quotation marks around MAC address for STK1002
48479 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
48480 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
48482 commit ff13ac8c7bbebb238e339592de765c546dba1073
48483 Author: Wolfgang Denk <wd@denx.de>
48484 Date: Thu Aug 30 14:42:15 2007 +0200
48486 Backout commit 8f1bc284 as it causes TFTP to fail.
48488 Signed-off-by: Wolfgang Denk <wd@denx.de>
48490 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
48491 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48492 Date: Thu Aug 30 02:26:17 2007 -0500
48494 Revert "Fix MPC8544DS PCIe3 scsi."
48496 This reverts commit 9468e680.
48497 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
48499 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48501 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
48502 Author: Grant Likely <grant.likely@secretlab.ca>
48503 Date: Wed Aug 29 18:26:24 2007 -0600
48505 tftp: don't implicity trust the format of recevied packets
48507 The TFTP OACK code trusts that the incoming packet is formated as
48508 ASCII text and can be processed by string functions. It also has a
48509 loop limit overflow bug where if the packet length is less than 8, it
48510 ends up looping over *all* of memory to find the 'blksize' string.
48512 This patch solves the problem by forcing the packet to be null
48513 terminated and using strstr() to search for the sub string.
48515 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
48517 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
48518 Author: Stefan Roese <sr@denx.de>
48519 Date: Wed Aug 29 16:31:18 2007 +0200
48521 ppc4xx: Change lwmon5 default environment to support Linux RTC
48523 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
48524 to supply the RTC I2C address as bootline parameter. This patch
48525 adds support for this rtc probing parameter to the bootargs:
48527 "rtc-pcf8563.probe=0,0x51"
48529 Signed-off-by: Stefan Roese <sr@denx.de>
48531 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
48532 Author: Kim Phillips <kim.phillips@freescale.com>
48533 Date: Wed Aug 29 09:06:05 2007 -0500
48535 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
48537 this had slipped through the cracks, since the sbc board was added
48538 after I wrote the original patch to remove all these symbols, and
48539 before it was merged.
48541 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48543 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
48544 Author: Wolfgang Denk <wd@denx.de>
48545 Date: Wed Aug 29 14:05:30 2007 +0200
48547 Add mii_init() prototype
48549 to get rid of a *lot* of compiler warnings.
48551 Signed-off-by: Wolfgang Denk <wd@denx.de>
48553 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
48554 Author: Wolfgang Denk <wd@denx.de>
48555 Date: Wed Aug 29 13:35:03 2007 +0200
48557 Disable network support on cmi_mpc5xx board
48559 ..because it caused compiler errors and there seems to be no
48560 board maintainer to take care of this.
48562 Signed-off-by: Wolfgang Denk <wd@denx.de>
48564 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
48565 Author: Kumar Gala <galak@kernel.crashing.org>
48566 Date: Mon Aug 20 09:44:00 2007 -0500
48568 Fix MPC8544DS PCIe3 scsi.
48570 <ed.swarthout@freescale.com>
48572 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
48573 is allocating memory space it doesn't need.
48575 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
48576 Signed-off-by: Andy Fleming <afleming@freescale.com>
48578 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
48579 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48580 Date: Tue Aug 21 09:38:59 2007 -0500
48584 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
48585 correct consoledev needed for linux boot.
48586 Standardize on fdt{file,addr} var to hold dtb file name.
48588 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
48590 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48592 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
48593 Author: Haiying Wang <Haiying.Wang@freescale.com>
48594 Date: Thu Aug 23 15:20:54 2007 -0400
48596 Enable L2 cache for MPC8568MDS board
48598 The L2 cache size is 512KB for 8568, print out the correct informaiton.
48600 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48602 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
48603 Author: Jason Jin <Jason.jin@freescale.com>
48604 Date: Wed Aug 22 17:54:49 2007 +0800
48606 Remove the bios emulator binary files from MAI board
48608 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
48610 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
48611 Author: Kim Phillips <kim.phillips@freescale.com>
48612 Date: Tue Aug 21 17:00:17 2007 -0500
48614 support board vendor-common makefiles
48616 if a board/$(VENDOR)/common/Makefile exists, build it.
48618 also add the first such case, board/freescale/common/Makefile, to
48619 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
48620 dictated by board configuration.
48622 thusly get rid of alternate build dir errors such as:
48624 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
48626 by putting the common/ mkdir command in its proper place (the common
48627 Makefile). Common bits from existing individual board Makefiles have
48630 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48632 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
48633 Author: stefano babic <sbabic@denx.de>
48634 Date: Tue Aug 21 15:52:33 2007 +0200
48636 Fix: TFTP is not working on little endian systems
48638 TFTP does not work anymore after multicast tftp
48639 patch was applied on little endian systems.
48642 Signed-off-by: Stefano Babic <sbabic@denx.de>
48644 commit 5f470948570526e9186f053a3003da7719604e90
48645 Author: stefano babic <sbabic@denx.de>
48646 Date: Tue Aug 21 15:50:33 2007 +0200
48648 Fix MAC address setting in DM9000 driver.
48650 The logic to check if there is a correct MAC address in the DM9000
48651 EEPROM, added in the last patch, is wrong. Now the MAC address is
48652 always taken from the environment, even if a suitable MAC is present
48655 Signed-off-by: Stefano Babic <sbabic@denx.de>
48657 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
48658 Author: Martin Krause <martin.krause@tqs.de>
48659 Date: Tue Aug 21 12:40:34 2007 +0200
48661 MPC5xxx: fix some compiler warnings in USB code
48663 Fix the following warnings:
48664 - usb.c:xx: warning: function declaration isn't a prototype
48665 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
48666 from pointer wihtout a cast
48668 Signed-off-by: Martin Krause <martin.krase@tqs.de>
48670 commit 16e23c3f5dab6937f5109365416808c7f15c122b
48671 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48672 Date: Mon Aug 20 23:55:33 2007 -0500
48674 fsl_pci_init - Remove self PCSRBAR allocation
48676 CPU physical address space was being wasted by allocating a
48677 PCSRBAR PCI inbound region to it's memory space.
48679 As a rule, PCSRBAR should be left alone since it does not affect
48680 transactions from self and other masters may have changed it.
48682 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
48684 commit 0e700ce03a23bb1921149bc77008ace7103d5289
48685 Author: Martin Krause <martin.krause@tqs.de>
48686 Date: Mon Aug 20 13:56:47 2007 +0200
48688 Fix compiler warning in include/s3c2410.h
48690 This patch fixes the "type qualifiers ignored on fuction return tpye"
48691 warning for include/s3c2410.h
48693 Signed-off-by: Martin Krause <martin.krause@tqs.de>
48695 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
48696 Author: Dirk Behme <dirk.behme@googlemail.com>
48697 Date: Mon Aug 20 07:09:05 2007 +0200
48699 Fix compilation error for omap2420h4_config.
48701 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
48702 and flash_probe() calls in env_flash.c.
48704 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
48706 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
48707 Author: Kim Phillips <kim.phillips@freescale.com>
48708 Date: Fri Aug 10 14:34:14 2007 -0500
48710 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
48712 and make some minor corrections to the FDT part of the README.
48714 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48716 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
48717 Author: Wolfgang Denk <wd@denx.de>
48718 Date: Wed Aug 29 01:32:05 2007 +0200
48720 Minor coding style cleanup.
48722 Signed-off-by: Wolfgang Denk <wd@denx.de>
48724 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
48725 Author: Heiko Schocher <hs@pollux.denx.de>
48726 Date: Tue Aug 28 17:40:33 2007 +0200
48728 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
48730 Signed-off-by: Heiko Schocher <hs@denx.de>
48732 commit f98984cb194bb34dbe1db9429d3b51133af30d07
48733 Author: Heiko Schocher <hs@pollux.denx.de>
48734 Date: Tue Aug 28 17:39:14 2007 +0200
48736 IDE: - make ide_inb () and ide_outb () "weak", so boards can
48737 define there own I/O functions.
48738 (Needed for the pcs440ep board).
48739 - The default I/O Functions are again 8 Bit accesses.
48740 - Added CONFIG_CMD_IDE for the pcs440ep Board.
48742 Signed-off-by: Heiko Schocher <hs@denx.de>
48744 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
48745 Author: Semih Hazar <semih.hazar@indefia.com>
48746 Date: Mon Aug 20 19:00:01 2007 +0300
48748 AVR32: Change prototype of memset
48750 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
48751 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
48753 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
48754 Author: Yuri Tikhonov <yur@emcraft.com>
48755 Date: Sat Aug 25 05:07:16 2007 +0200
48757 POST: limit memory test area to not touch global data anymore
48759 As experienced on lwmon5, on some boards the POST memory test can
48760 corrupt the global data buffer (bd). This patch fixes this issue
48761 by checking and limiting this area.
48763 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
48764 Signed-off-by: Stefan Roese <sr@denx.de>
48766 commit 75e1a84d483e36be10e206e539b028c4889e1158
48767 Author: Stefan Roese <sr@denx.de>
48768 Date: Fri Aug 24 15:41:42 2007 +0200
48770 ppc4xx: Add RTC POST test to lwmon5 board configuration
48772 Since this RTC POST test is taking quite a while to complete
48773 it's only initiated upon special keypress same as the complete
48776 Signed-off-by: Stefan Roese <sr@denx.de>
48778 commit d7bfa620037a6d2210159387571bdf93aa32c162
48779 Author: Stefan Roese <sr@denx.de>
48780 Date: Fri Aug 24 15:19:10 2007 +0200
48782 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
48784 Signed-off-by: Stefan Roese <sr@denx.de>
48786 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
48787 Author: Stefan Roese <sr@denx.de>
48788 Date: Thu Aug 23 11:02:37 2007 +0200
48790 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
48792 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
48793 board. Now the "eeprom" command can be used to read/write from/to this
48794 device. Additionally a new command was added "eepromwp" to en-/disable
48795 the write-protect of this 2nd EEPROM.
48797 The 1st EEPROM is not affected by this write-protect command.
48799 Signed-off-by: Stefan Roese <sr@denx.de>
48801 commit c64fb30e4c5976007d56fc1789c7a0666082b536
48802 Author: Stefan Roese <sr@denx.de>
48803 Date: Wed Aug 22 08:56:09 2007 +0200
48805 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
48807 Signed-off-by: Stefan Roese <sr@denx.de>
48809 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
48810 Author: Stefan Roese <sr@denx.de>
48811 Date: Tue Aug 21 16:27:57 2007 +0200
48813 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
48815 This patch adds support for the matrix keyboard on the lwmon5 board.
48816 Since the implementation in the dsPCI is kind of compatible with the
48817 "old" lwmon board, most of the code is copied from the lwmon
48820 Signed-off-by: Stefan Roese <sr@denx.de>
48822 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
48823 Author: Wolfgang Denk <wd@denx.de>
48824 Date: Sun Aug 19 10:27:34 2007 +0200
48826 Fix some build errors.
48828 Signed-off-by: Wolfgang Denk <wd@denx.de>
48830 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
48831 Author: Wolfgang Denk <wd@denx.de>
48832 Date: Sat Aug 18 22:00:38 2007 +0200
48836 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
48837 Author: Kim Phillips <kim.phillips@freescale.com>
48838 Date: Thu Aug 16 22:52:39 2007 -0500
48840 lib_ppc: make board_add_ram_info weak
48842 platforms wishing to display RAM diagnostics in addition to size,
48843 can do so, on one line, in their own board_add_ram_info()
48846 this consequently eliminates CONFIG_ADD_RAM_INFO.
48848 Thanks to Stefan for the hint.
48850 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48852 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
48853 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48854 Date: Fri Aug 17 12:43:44 2007 +0900
48856 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
48858 This patch has been sent on:
48861 Many users of PCI config read routines tend to ignore the function
48862 ret value, and are only concerned about the contents of *val. Based
48863 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
48864 the *val on dword read error.
48866 Without this fix, for example, we'll go on scanning bus with vendor or
48867 header_type uninitialized. This brings many unnecessary config trials.
48869 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48871 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
48872 Author: Stefan Roese <sr@denx.de>
48873 Date: Sat Aug 18 14:37:52 2007 +0200
48875 ColdFire: Fix some remaining problems with CFG_CMD_
48877 Signed-off-by: Stefan Roese <sr@denx.de>
48879 commit 8280f6a1c43247616b68224675188e5ccd124650
48880 Author: Stefan Roese <sr@denx.de>
48881 Date: Sat Aug 18 14:33:02 2007 +0200
48883 Coding style cleanup
48885 Signed-off-by: Stefan Roese <sr@denx.de>
48887 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
48888 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48889 Date: Thu Aug 16 19:23:50 2007 -0500
48891 ColdFire: Add M5235EVB Platform for MCF523x
48893 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48895 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
48896 Author: Kim Phillips <kim.phillips@freescale.com>
48897 Date: Fri Aug 17 09:30:00 2007 -0500
48899 mpc83xx: fix typo in DDR2 programming
48901 introduced in the implement board_add_ram_info patch as I was cleaning out the
48902 magic numbers. sorry.
48904 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48906 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
48907 Author: Kim Phillips <kim.phillips@freescale.com>
48908 Date: Thu Aug 16 22:53:09 2007 -0500
48910 mpc83xx: move freescale boards to boards/freescale
48912 includes build fixes.
48914 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48916 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
48917 Author: Kim Phillips <kim.phillips@freescale.com>
48918 Date: Thu Aug 16 22:52:59 2007 -0500
48920 mpc83xx: suppress unused variable 'val8' warning
48922 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48924 commit bbea46f76f767b919070b4829bf34c86bd223248
48925 Author: Kim Phillips <kim.phillips@freescale.com>
48926 Date: Thu Aug 16 22:52:48 2007 -0500
48928 mpc83xx: implement board_add_ram_info
48930 add board_add_ram_info, to make memory diagnostic output more
48931 consistent. u-boot banner output now looks like:
48933 DRAM: 256 MB (DDR1, 64-bit, ECC on)
48935 and for boards with SDRAM on the local bus, a line such as this is
48938 SDRAM: 64 MB (local bus)
48940 also replaced some magic numbers with their equivalent define names.
48942 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48944 commit 14778585d1389d86d5846efec29e5fce892680ce
48945 Author: Tony Li <tony.li@freescale.com>
48946 Date: Fri Aug 17 10:35:59 2007 +0800
48948 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
48950 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
48951 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
48953 Signed-off-by Tony Li <tony.li@freescale.com>
48955 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
48956 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48957 Date: Thu Aug 16 15:05:11 2007 -0500
48959 ColdFire: Add M54455EVB for MCF5445x
48961 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48963 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
48964 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48965 Date: Thu Aug 16 13:20:50 2007 -0500
48967 ColdFire: Add M5253EVBE platform for MCF52x2
48969 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48971 commit a605aacd8324094199402816cc6d9124aba57b8d
48972 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48973 Date: Thu Aug 16 05:04:31 2007 -0500
48975 ColdFire: Add M5249EVB platform for MCF52x2
48977 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48979 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
48980 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48981 Date: Wed Aug 15 20:32:06 2007 -0500
48983 ColdFire: Update Freescale MCF52x2 platforms
48985 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48987 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
48988 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48989 Date: Wed Aug 15 19:55:10 2007 -0500
48991 ColdFire: Update EB+MCF-EV123 platform
48993 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48995 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
48996 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48997 Date: Wed Aug 15 19:46:38 2007 -0500
48999 ColdFire: update TASREG platform for MCF52x2
49001 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49003 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
49004 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49005 Date: Wed Aug 15 19:45:51 2007 -0500
49007 ColdFire: update r5200 platform for MCF52x2
49009 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49011 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
49012 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49013 Date: Wed Aug 15 19:43:20 2007 -0500
49015 ColdFire: idmr platform MCF52x2 update
49017 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49019 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
49020 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49021 Date: Wed Aug 15 19:41:06 2007 -0500
49023 ColdFire: cobra5272 platform for MCF52x2 update
49025 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49027 commit 56115665b4a64c10c01440c57749b265e0908fa4
49028 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49029 Date: Wed Aug 15 19:38:15 2007 -0500
49031 ColdFire: MCF52x2 Header files update
49033 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49035 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
49036 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49037 Date: Wed Aug 15 19:21:21 2007 -0500
49039 ColdFire: MCF52x2 update
49041 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49043 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
49044 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49045 Date: Wed Aug 15 18:46:11 2007 -0500
49047 ColdFire: MCF5329 update cache
49049 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49051 commit 7171977fb8fd77cfb6676953fa9a05789c450513
49052 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49053 Date: Wed Aug 15 15:40:20 2007 -0500
49055 ColdFire: MCF5329 header file clean up
49057 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49059 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
49060 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49061 Date: Wed Aug 15 15:39:17 2007 -0500
49063 ColdFire: MCF5329 Update and cleanup
49065 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49067 commit 10327dc5541f947c0cf7e31fef86c4706169607a
49068 Author: Andy Fleming <afleming@freescale.com>
49069 Date: Thu Aug 16 16:35:02 2007 -0500
49071 Add CONFIG_HAS_ETH0 to all boards with TSEC
49073 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
49074 to update TSEC1's device-tree node, so we need to add it
49075 to all the boards with TSECs. Do this for 83xx and 86xx, too,
49076 since they will eventually do something similar.
49078 Signed-off-by: Andy Fleming <afleming@freescale.com>
49080 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
49081 Author: Kumar Gala <galak@kernel.crashing.org>
49082 Date: Thu Aug 16 15:05:04 2007 -0500
49084 Update MPC8544 DS PCI memory map
49086 The PCIe bus that the ULI M1575 is connected to has no possible way of
49087 needing more than the fixed amount of IO & Memory space needed by the ULI.
49089 So make it use far less IO & memory space and have it use the shared LAW. This
49090 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
49093 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
49095 commit ea5877e31ed63ade948fd1293895ec23fe01472e
49096 Author: Kumar Gala <galak@kernel.crashing.org>
49097 Date: Thu Aug 16 11:01:21 2007 -0500
49099 Fix up some fdt issues on 8544DS
49101 It looks like we had a merge issue that duplicated a bit of code
49102 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
49103 the MAC address properly set in the device tree on boot for TSEC1
49105 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
49107 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
49108 Author: Niklaus Giger <niklaus.giger@netstal.com>
49109 Date: Thu Aug 16 15:16:03 2007 +0200
49111 PPC4xx:HCU4/5 cleanup
49113 Minor cleanups to confirm to the u-boot coding style.
49114 Some german expressions -> english.
49115 HCU5 enforces a unique IP adress for a given slot in the rack.
49117 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49119 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
49120 Author: Niklaus Giger <niklaus.giger@netstal.com>
49121 Date: Thu Aug 16 15:16:02 2007 +0200
49123 PPC4xx:HCU4/5 cleanup ecc/sdram init
49125 Make ecc initialisation robust, as DDR2-ECC errors may be generated
49126 while zeroing the RAM.
49128 Return 16 bytes (a cacheline) less than the available memory, as the
49129 board and/or PPC440EPx might have problems accessing the last bytes.
49131 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49133 commit d35b508a55508535b6e8445b718585d27df733d3
49134 Author: Kim Phillips <kim.phillips@freescale.com>
49135 Date: Wed Aug 15 22:29:56 2007 -0500
49137 fdt: suppress unused variable 'bd' warning
49139 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49141 commit 82bd9ee77490588d4da785d75829ca63d0176baf
49142 Author: Andy Fleming <afleming@freescale.com>
49143 Date: Wed Aug 15 20:06:50 2007 -0500
49145 Fix warnings from of_data copy fix
49147 Forgot to cast of_flat_tree to ulong.
49149 Signed-off-by: Andy Fleming <afleming@freescale.com>
49151 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
49152 Author: Andy Fleming <afleming@freescale.com>
49153 Date: Wed Aug 15 20:03:44 2007 -0500
49155 Don't wait for disconnected TSECs
49157 The TSEC driver's PHY code waits a long time for autonegotiation to
49158 complete, even if the link is down. The PHY knows the link is
49159 down or up before autonegotiation completes, so we can short-circuit
49160 the process if the link is down.
49162 Signed-off-by: Andy Fleming <afleming@freescale.com>
49164 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
49165 Author: Andy Fleming <afleming@freescale.com>
49166 Date: Wed Aug 15 20:03:34 2007 -0500
49168 Fix numerous bugs in the 8568 UEC support
49170 Actually, fixed a large bug in the UEC for *all* platforms.
49171 How did this ever work?
49173 uec_init() did not follow the spec for eth_init(), and returned
49174 0 on success. Switch it to return the link like tsec_init()
49177 The immap for the 8568 was defined based on MPC8568, rather than
49182 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
49184 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
49187 Signed-off-by: Andy Fleming <afleming@freescale.com>
49189 commit 3a79013e2adda53332dfd0b511066a805e929a9d
49190 Author: Andy Fleming <afleming@freescale.com>
49191 Date: Wed Aug 15 20:03:25 2007 -0500
49193 Define tsec flag values in config files
49195 The tsec_info structure and array has a "flags" field for each
49196 ethernet controller. This field is the only reason there are
49197 settings. Switch to defining TSECn_FLAGS for each controller
49198 in the config header, and we can greatly simplify the array, and
49199 also simplify the addition of future boards.
49201 Signed-off-by: Andy Fleming <afleming@freescale.com>
49203 commit ec7238229507e7f47533a611ea8c53319d234cf3
49204 Author: Andy Fleming <afleming@freescale.com>
49205 Date: Wed Aug 15 20:03:13 2007 -0500
49207 Add support for building all boards with a TSEC
49209 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
49210 Now we can do a MAKEALL test on all of them!
49212 Signed-off-by: Andy Fleming <afleming@freescale.com>
49214 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
49215 Author: Andy Fleming <afleming@freescale.com>
49216 Date: Wed Aug 15 17:30:56 2007 -0500
49218 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
49220 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
49221 neglected to *also* put the code inside the similar #ifdef
49222 for CONFIG_OF_FLAT_TREE.
49224 Signed-off-by: Andy Fleming <afleming@freescale.com>
49226 commit 78f9fef7f406078c8bf7191e665a73f795157746
49227 Author: Scott Wood <scottwood@freescale.com>
49228 Date: Wed Aug 15 15:46:46 2007 -0500
49230 mpc885ads: Don't define CONFIG_BZIP2.
49232 bzip2 requires a significant chunk of malloc space, and there isn't
49233 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
49234 and a downloaded image at 0x400000.
49236 Signed-off-by: Scott Wood <scottwood@freescale.com>
49238 commit 002275a3ed8b114885f6702d6d544d0780dfe689
49239 Author: Michal Simek <Monstr@seznam.cz>
49240 Date: Thu Aug 16 08:54:10 2007 +0200
49242 Bios emulator - fix microblaze toolchain problem
49244 microblaze CPU have problem with bios_emulator code.
49245 Microblaze toolchain doesn't support PRAGMA PACK.
49247 Signed-off-by: Michal Simek <monstr@monstr.eu>
49249 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
49250 Author: Wolfgang Denk <wd@denx.de>
49251 Date: Thu Aug 16 11:51:04 2007 +0200
49253 Minor Coding Style fix; Update CHANGELOG file.
49255 Signed-off-by: Wolfgang Denk <wd@denx.de>
49257 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
49258 Author: Stefan Roese <sr@denx.de>
49259 Date: Thu Aug 16 11:21:49 2007 +0200
49261 ppc4xx: Remove #warning in esd auto_update.c
49263 Signed-off-by: Stefan Roese <sr@denx.de>
49265 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
49266 Author: Stefan Roese <sr@denx.de>
49267 Date: Fri Jun 22 17:32:28 2007 +0200
49269 ppc7xx: Update CPCI750 board
49271 This small CPCI750 update extends the board specific command
49272 "show_config" to display the Marvell strapping registers and
49273 extends the PCI IDE controller.
49275 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
49276 Signed-off-by: Stefan Roese <sr@denx.de>
49278 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
49279 Author: Michal Simek <monstr@monstr.eu>
49280 Date: Thu Aug 16 10:46:28 2007 +0200
49282 [FIX] Changes for bios_emulator code for others architecture
49284 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
49285 Author: Michal Simek <monstr@monstr.eu>
49286 Date: Thu Aug 16 10:45:09 2007 +0200
49288 [FIX] Remove unused include file
49290 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
49291 Author: Stefan Roese <sr@denx.de>
49292 Date: Thu Aug 16 10:18:33 2007 +0200
49294 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
49296 Signed-off-by: Stefan Roese <sr@denx.de>
49298 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
49299 Author: Stefan Roese <sr@denx.de>
49300 Date: Thu Aug 16 09:54:51 2007 +0200
49302 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
49304 Signed-off-by: Stefan Roese <sr@denx.de>
49306 commit 02ba7022f62bb75908296c58c63866e1d294b69a
49307 Author: Stefan Roese <sr@denx.de>
49308 Date: Thu Aug 16 09:52:29 2007 +0200
49310 ppc4xx: Update Sequoia/Rainier bootstrap command
49312 As suggested by David Mitchell, here an update for the Sequoia/Rainier
49315 Signed-off-by: Stefan Roese <sr@denx.de>
49317 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
49318 Author: Kim Phillips <kim.phillips@freescale.com>
49319 Date: Wed Aug 15 22:30:39 2007 -0500
49321 mpc83xx: enable libfdt by default on freescale boards
49323 this enables libfdt code by default for the
49324 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
49325 mpc8349itx and gp boards.
49327 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49329 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
49330 Author: Kim Phillips <kim.phillips@freescale.com>
49331 Date: Wed Aug 15 22:30:33 2007 -0500
49333 mpc83xx: migrate remaining freescale boards to libfdt
49335 this adds libfdt support code for the freescale
49336 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
49339 Boards remain compatible with OF_FLAT_TREE.
49341 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49343 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
49344 Author: Kim Phillips <kim.phillips@freescale.com>
49345 Date: Wed Aug 15 22:30:26 2007 -0500
49347 mpc83xx: move common /memory node update mechanism to cpu.c
49349 also adds common prototypes to include/common.h.
49351 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49353 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
49354 Author: Kim Phillips <kim.phillips@freescale.com>
49355 Date: Wed Aug 15 22:30:19 2007 -0500
49357 mpc83xx: remaining 8360 libfdt fixes
49359 PCI clocks and QE frequencies weren't being updated, and the core clock
49360 was being updated incorrectly. This patch also adds a /memory node if
49361 it doesn't already exist prior to update.
49363 plus some cosmetic trimming to single line comments.
49365 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49367 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
49368 Author: Kim Phillips <kim.phillips@freescale.com>
49369 Date: Wed Aug 15 22:30:12 2007 -0500
49371 mpc83xx: fix UEC2->1 typo in libfdt setup code
49373 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49375 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
49376 Author: Kim Phillips <kim.phillips@freescale.com>
49377 Date: Wed Aug 15 22:30:05 2007 -0500
49379 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
49381 and reorder the existing 83xx maintainers alpha.
49383 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49385 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
49386 Author: Michal Simek <monstr@monstr.eu>
49387 Date: Wed Aug 15 21:15:05 2007 +0200
49389 [FIX] Resolve problem with warnings
49390 microblaze toolchain don't support PRAGMA PACK.
49392 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
49393 Author: Michal Simek <monstr@monstr.eu>
49394 Date: Wed Aug 15 21:05:07 2007 +0200
49396 [FIX] Correction command setting for Microblaze boards
49398 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
49399 Author: Michal Simek <monstr@monstr.eu>
49400 Date: Wed Aug 15 21:03:41 2007 +0200
49402 [FIX] Correction command definition
49404 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
49405 Author: Jon Loeliger <jdl@freescale.com>
49406 Date: Wed Aug 15 11:55:35 2007 -0500
49408 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
49410 Remove a leftover in net/tftp.c while we're at it.
49412 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49414 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
49415 Author: Jon Loeliger <jdl@freescale.com>
49416 Date: Wed Aug 15 12:20:40 2007 -0500
49418 Move the MPC8641HPCN board under board/freescale.
49420 Minor path corrections needed to ensure buildability.
49422 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49424 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
49425 Author: Jon Loeliger <jdl@freescale.com>
49426 Date: Wed Aug 15 11:46:22 2007 -0500
49428 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
49430 Remove a leftover in net/tftp.c while we're at it.
49432 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49434 commit 210f463c71917b7a4495c2103c228b9c179ae64d
49435 Author: Jerry Van Baren <gvb.uboot@gmail.com>
49436 Date: Wed Aug 15 11:13:15 2007 -0400
49438 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
49440 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
49441 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
49442 when it should have gone inside of the conditional. As a result, it
49443 broke non-LIBFDT board builds.
49445 Also added a missing "not." to the comment.
49447 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49449 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
49450 Author: Niklaus Giger <niklaus.giger@netstal.com>
49451 Date: Wed Aug 15 12:14:23 2007 +0200
49453 PPC4xx:HCU4/5-Board fix compile warning
49455 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49457 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
49458 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49459 Date: Tue Aug 14 14:06:45 2007 -0500
49461 Fix malloc size error in ahci_init_one.
49463 Typically this causes scsi init to corrupt the
49464 devlist and break the coninfo command.
49465 Fix a compiler size warning.
49467 Signed-off-by: Jason Jin <jason.jin@freescale.com>
49468 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49469 Acked-by: Andy Fleming <afleming@freescale.com>
49471 commit b361acd64fd2525c081b9b288b0804efe209c0e9
49472 Author: ksi@koi8.net <ksi@koi8.net>
49473 Date: Tue Aug 14 10:02:16 2007 -0700
49475 TI DaVinci - fix unsupported %hhx format
49477 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
49479 commit f01dbb5424a81453c81190dd30e945891466f621
49480 Author: Wolfgang Denk <wd@denx.de>
49481 Date: Tue Aug 14 18:42:36 2007 +0200
49483 Coding style cleanup. Update CHANGELOG.
49485 Signed-off-by: Wolfgang Denk <wd@denx.de>
49487 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
49488 Author: Andy Fleming <afleming@freescale.com>
49489 Date: Tue Aug 14 10:32:59 2007 -0500
49491 Fix initrd/dtb interaction
49493 The original code would wrongly relocate the blob to be right before
49494 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
49495 if it is defined. So we make two changes:
49497 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
49499 2) If the blob is being relocated, relocate it before kbd, not initrd
49501 Signed-off-by: Andy Fleming <afleming@freescale.com>
49503 commit e54b970173769307a116bd34028b6d0c2eea2a4e
49504 Author: Peter Pearse <peter.pearse@arm.com>
49505 Date: Tue Aug 14 15:40:00 2007 +0100
49507 Supply spi interface in at45.c
49509 commit 4ce846ec59f36b85d6644a769690ad3feb667575
49510 Author: Stefan Roese <sr@denx.de>
49511 Date: Tue Aug 14 15:12:01 2007 +0200
49513 POST: Fix merge problem
49515 Signed-off-by: Stefan Roese <sr@denx.de>
49517 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
49518 Author: Stefan Roese <sr@denx.de>
49519 Date: Tue Aug 14 15:03:17 2007 +0200
49521 Coding style cleanup
49523 Signed-off-by: Stefan Roese <sr@denx.de>
49525 commit 779e975117a75e91fcebe226a63104dbfb924ab1
49526 Author: Stefan Roese <sr@denx.de>
49527 Date: Tue Aug 14 14:44:41 2007 +0200
49529 ppc4xx: Add initial Zeus (PPC405EP) board support
49531 Signed-off-by: Stefan Roese <sr@denx.de>
49533 commit c5a172a5fd636c12467429e3f7910e53773979c6
49534 Author: Stefan Roese <sr@denx.de>
49535 Date: Tue Aug 14 14:41:55 2007 +0200
49537 POST: Add option for external ethernet loopback test
49539 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
49540 is not done using an internal loopback connection, but by assuming
49541 that an external loopback connector is plugged into the board.
49543 Signed-off-by: Stefan Roese <sr@denx.de>
49545 commit eb2b4010ae426245172988804ee8d9193fb41038
49546 Author: Stefan Roese <sr@denx.de>
49547 Date: Tue Aug 14 14:39:44 2007 +0200
49549 POST: Add ppc405 support to cache and UART POST
49551 Signed-off-by: Stefan Roese <sr@denx.de>
49553 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
49554 Author: Peter Pearse <peter.pearse@arm.com>
49555 Date: Tue Aug 14 10:46:32 2007 +0100
49557 Replace lost end of at45.c.
49559 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
49560 Author: Peter Pearse <peter.pearse@arm.com>
49561 Date: Tue Aug 14 10:30:06 2007 +0100
49563 Update Makefiles for merged and split at45.c.
49565 commit 3454cece2db57cb9eb7087995f7e73066a163f71
49566 Author: Peter Pearse <peter.pearse@arm.com>
49567 Date: Tue Aug 14 10:21:06 2007 +0100
49569 Delete the merged files.
49571 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
49572 Author: Peter Pearse <peter.pearse@arm.com>
49573 Date: Tue Aug 14 10:14:05 2007 +0100
49577 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
49578 Author: Peter Pearse <peter.pearse@arm.com>
49579 Date: Tue Aug 14 10:10:52 2007 +0100
49581 Add MACH_TYPE records for several AT91 boards.
49582 Merge to two at45.c files into a common file, split to at45.c and spi.c
49583 Fix spelling error in DM9161 PHY Support.
49584 Initialize at91rm9200 board (and set LED).
49585 Add PIO control for at91rm9200dk LEDs and Mux.
49586 Change dataflash partition boundaries to be compatible with Linux 2.6.
49588 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
49589 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
49591 commit 4ef35e53c693556c54b0c22d6f873de87bade253
49592 Author: Wolfgang Denk <wd@denx.de>
49593 Date: Tue Aug 14 09:54:46 2007 +0200
49595 Coding style cleanup, update CHANGELOG
49597 Signed-off-by: Wolfgang Denk <wd@denx.de>
49599 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
49600 Author: Wolfgang Denk <wd@denx.de>
49601 Date: Tue Aug 14 09:47:27 2007 +0200
49603 Coding style cleanup; rebuild CHANGELOG
49605 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
49606 Author: Randy Vinson <rvinson@linuxbox.(none)>
49607 Date: Tue Feb 27 19:42:22 2007 -0700
49609 85xxCDS: Add make targets for legacy systems.
49611 The PCI ID select values on the Arcadia main board differ depending
49612 on the version of the hardware. The standard configuration supports
49613 Rev 3.1. The legacy target supports Rev 2.x.
49615 Signed-off-by Randy Vinson <rvinson@mvista.com>
49617 commit e41094c7e38177c755fbd9b182018069614f080d
49618 Author: Andy Fleming <afleming@freescale.com>
49619 Date: Tue Aug 14 01:50:09 2007 -0500
49621 85xxCDS: Enable the VIA PCI-to-ISA bridge.
49623 Author: Randy Vinson <rvinson@linuxbox.(none)>
49625 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
49626 Arcadia main board.
49628 Signed-off-by: Randy Vinson <rvinson@mvista.com>
49629 Signed-off-by: York Sun <yorksun@freescale.com>
49631 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
49632 Author: Andy Fleming <afleming@freescale.com>
49633 Date: Tue Aug 14 00:14:25 2007 -0500
49635 Add support for UEC to 8568
49637 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
49638 Signed-off-by: Andy Fleming <afleming@freescale.com>
49640 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
49641 Author: Haiying Wang <Haiying.Wang@freescale.com>
49642 Date: Tue Jun 19 14:18:34 2007 -0400
49644 Add PCI support for MPC8568MDS board
49646 This patch is against u-boot-mpc85xx.git of www.denx.com
49648 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
49649 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
49651 commit d111d6382c99fdea08c2312eeeae8786945e189a
49652 Author: Haiying Wang <Haiying.Wang@freescale.com>
49653 Date: Tue Jun 19 14:18:32 2007 -0400
49655 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
49657 This patch is against u-boot-mpc85xx.git of www.denx.com
49659 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
49660 both MPC8548CDS board and MPC8568MDS board, especially for supporting
49663 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
49664 DDR2 on all current board versions especially ver 1.92 or later to bring
49667 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
49669 commit 3db0bef59eab1155801618cef5c481e97553b597
49670 Author: Kumar Gala <galak@kernel.crashing.org>
49671 Date: Tue Aug 7 18:07:27 2007 -0500
49673 Use an absolute address when jumping out of 4k boot page
49675 On e500 when we leave the 4k boot page we should use an absolute address since
49676 we don't know where the board code may want us to be really running at.
49678 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
49680 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
49681 Author: Andy Fleming <afleming@freescale.com>
49682 Date: Mon Aug 13 14:49:59 2007 -0500
49684 MPC85xx BA bits not set for 3-bit bank address DIMM
49686 The current implementation does not set the number of bank address bits
49687 (BA) in the processor. The default assumes 2 logical bank bits. This
49688 works fine for a DIMM that uses devices with 4 internal banks (SPD
49689 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
49690 devices with 8 internal banks (SPD byte17 = 0x8).
49692 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
49694 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
49695 Author: Andy Fleming <afleming@freescale.com>
49696 Date: Mon Aug 13 14:38:06 2007 -0500
49698 Fix minor 85xx warnings
49700 Some patches had inserted warnings into the build:
49701 * mpc8560ads declared data without using it
49702 * cpu_init declared ecm and immap without using it in all CONFIGs
49703 * MPC8548CDS.h had its default filenames changed so that they contained
49704 "\m" in the paths. Made the defaults not Windows-specific (or
49707 Signed-off-by: Andy Fleming <afleming@freescale.com>
49709 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
49710 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49711 Date: Fri Jul 27 01:50:52 2007 -0500
49713 8548cds PCIE support.
49715 Make the early L1 cache stack region guarded to prevent speculative
49716 fetches outside the locked range.
49718 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
49719 init.S whitespace cleanup.
49721 Allow TEXT_BASE value to be specified on command line. This allows it
49722 to be set to 0xfffc0000 which cuts the uboot binary in half.
49724 Clear and enable lbc and ecm errors.
49726 Update last_busno in device-tree for pci and pcie.
49728 Remove load of obsolete cpu/mpc85xx/pci.0
49730 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49731 Acked-by: Andy Fleming <afleming@freescale.com>
49733 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
49734 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49735 Date: Fri Jul 27 01:50:51 2007 -0500
49737 8544ds PCIE support
49739 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
49741 Enable LBC and ECM errors and clear error registers.
49743 Add tftpflash env var to get uboot from tftp server and flash it.
49745 Add pci/pcie convenience env vars to display register space:
49746 "run pcie3regs" to see all pcie3 ccsr registers
49747 "run pcie3cfg" to see all cfg registers
49748 Whitespace cleanup and MPC8544DS.h
49750 Enable CONFIG_INTERRUPTS.
49752 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49753 Acked-by: Andy Fleming <afleming@freescale.com>
49755 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
49756 Author: Andy Fleming <afleming@freescale.com>
49757 Date: Tue Aug 14 01:34:21 2007 -0500
49759 85xx start.S cleanup and exception support
49761 From: Ed Swarthout <Ed.Swarthout@freescale.com>
49763 Support external interrupts from platform to eliminate system hangs.
49764 Define CONFIG_INTERRUPTS board configure option to enable.
49765 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
49767 Remove extra cpu initialization redundant with hardware initialization.
49768 Whitespace cleanup.
49770 Define and use _START_OFFSET consistent with other processors using
49773 Move additional code from .text to boot page to make room for
49774 exception vectors at start of image.
49776 Handle Machine Check, External and Critical exceptions.
49778 Fix e500 machine check error determination in traps.c
49780 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
49782 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49783 Acked-by: Andy Fleming <afleming@freescale.com>
49785 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
49786 Author: Andy Fleming <afleming@freescale.com>
49787 Date: Tue Aug 14 01:33:18 2007 -0500
49789 Add MPC8544DS README
49791 Signed-off-by: Andy Fleming <afleming@freescale.com>
49793 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
49794 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49795 Date: Fri Jul 27 01:50:48 2007 -0500
49797 85xx allow debugger to configure ddr.
49799 Only check for mpc8548 rev 1 when compiled for 8548.
49801 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49802 Acked-by: Andy Fleming <afleming@freescale.com>
49804 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
49805 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49806 Date: Fri Jul 27 01:50:47 2007 -0500
49808 mpc85xx L2 cache reporting and SRAM relocation option.
49810 Allow debugger to override flash cs0/cs1 settings to enable alternate
49813 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49814 Acked-by: Andy Fleming <afleming@freescale.com>
49816 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
49817 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49818 Date: Fri Jul 27 01:50:46 2007 -0500
49820 e500 needs ppc_asm.tmp MCK_EXCEPTION
49822 Always define MCK_EXCEPTION macro - so e500 can use it too.
49824 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49825 Acked-by: Andy Fleming <afleming@freescale.com>
49827 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
49828 Author: David Updegraff <dave@cray.com>
49829 Date: Mon Jun 11 10:41:07 2007 -0500
49831 multicast tftp: RFC2090
49833 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
49834 on Realtek RTL8139 and Freescale TSEC.
49836 Signed-off-by: David Updegraff <dave@cray.com>
49837 Signed-off-by: Ben Warren <bwarren@qstreams.com>
49839 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
49840 Author: Wilson Callan <wcallan@savantav.com>
49841 Date: Sat Jul 28 10:56:13 2007 -0400
49843 New CONFIG_BOOTP_SERVERIP option
49845 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
49846 from the bootp server
49848 Signed-off-by: Wilson Callan <wcallan@savantav.com>
49849 Signed-off-by: Ben Warren <bwarren@qstreams.com>
49851 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
49852 Author: Mike Rapoport <mike@compulab.co.il>
49853 Date: Sun Aug 12 08:48:27 2007 +0300
49855 Add ability to take MAC address from the environment to DM9000 driver
49857 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
49858 Signed-off-by: Ben Warren <bwarren@qstreams.com>
49860 commit be5d72d10d47609326226225181e301fb9a33b58
49861 Author: Wolfgang Denk <wd@denx.de>
49862 Date: Mon Aug 13 21:57:53 2007 +0200
49864 Minor coding style cleanup. Update CHANGELOG.
49866 Signed-off-by: Wolfgang Denk <wd@denx.de>
49868 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
49869 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
49870 Date: Sat Aug 11 06:54:58 2007 -0500
49872 Modify SBC8641D to use new Freescale PCI routines
49874 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
49877 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
49878 Signde-off-by: Jon Loeliger <jdl@freescale.com>
49880 commit a08458303e7f9db67f296980036d3292c35cb45c
49881 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49882 Date: Fri Jun 29 18:38:51 2007 +0200
49884 atmel_mci: Fix data timeout value
49886 Calculate the data timeout based on values from the CSD instead of
49887 just using a hardcoded DTOR value. This is a backport of a similar fix
49888 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
49891 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49893 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
49894 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49895 Date: Mon Aug 13 17:22:31 2007 +0200
49897 AVR32: Include <div64.h> instead of <asm/div64.h>
49899 include/asm-avr32/div64.h was recently moved to include/div64.h, but
49900 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
49901 the patch was merged perhaps?)
49903 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
49906 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49908 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
49909 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49910 Date: Wed Jun 27 13:34:26 2007 +0200
49912 atmel_mci: Use 512 byte blocksize if possible
49914 Instead of always using the largest blocksize the card supports, check
49915 if it can support smaller block sizes and use 512 bytes if possible.
49916 Most cards do support this, and other parts of u-boot seem to have
49917 trouble with block sizes different from 512 bytes.
49919 Also enable underrun/overrun protection.
49921 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49922 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
49924 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
49925 Author: Stefan Roese <sr@denx.de>
49926 Date: Mon Aug 13 09:05:33 2007 +0200
49928 ppc4xx: Fix problem in PLL clock calculation
49930 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
49931 and fixes a bug in the PLL clock calculation.
49933 Signed-off-by: Stefan Roese <sr@denx.de>
49935 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
49936 Author: Wolfgang Denk <wd@denx.de>
49937 Date: Sun Aug 12 21:34:50 2007 +0200
49941 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
49942 Author: Wolfgang Denk <wd@denx.de>
49943 Date: Sun Aug 12 21:34:34 2007 +0200
49945 Minor alignment of output, 2nd try.
49946 Also update CHANGELOG
49948 Signed-off-by: Wolfgang Denk <wd@denx.de>
49950 commit 6b309f22a724fad8418e811751a0741b893419cf
49951 Author: Wolfgang Denk <wd@denx.de>
49952 Date: Sun Aug 12 20:35:49 2007 +0200
49954 Minor alignment of output
49956 Signed-off-by: Wolfgang Denk <wd@denx.de>
49958 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
49959 Author: Wolfgang Denk <wd@denx.de>
49960 Date: Sun Aug 12 18:28:18 2007 +0200
49962 Cleanup output on ADS5121 board
49964 Signed-off-by: Wolfgang Denk
49966 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
49967 Author: Wolfgang Denk <wd@denx.de>
49968 Date: Sun Aug 12 15:11:38 2007 +0200
49970 Adapt board configuration and fix kernel crash on MCC200 board.
49972 The update procedure was modified to turn off the USB subsystem
49973 before exit for MCC200 and TRAB. This is necessary as otherwise the
49974 USB controller continues to write periodically to system memory!
49976 MCC200-specific notes:
49977 - the patch disables the magic key check for MCC200
49978 - the patch contains the configuration changes made
49979 for the new revision of the board.
49981 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
49982 Signed-off-by: Wolfgang Denk <wd@denx.de>
49984 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
49985 Author: Wolfgang Denk <wd@denx.de>
49986 Date: Sun Aug 12 14:47:54 2007 +0200
49988 Adjust default configuration of ADS5121 board.
49990 Signed-off-by: Wolfgang Denk <wd@denx.de>
49992 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
49993 Author: Wolfgang Denk <wd@denx.de>
49994 Date: Sun Aug 12 14:27:39 2007 +0200
49996 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
49998 Signed-off-by: Wolfgang Denk <wd@denx.de>
50000 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
50001 Author: Gerald Van Baren <vanbaren@cideas.com>
50002 Date: Tue Aug 7 21:14:22 2007 -0400
50004 Improve error print messages.
50006 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50008 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
50009 Author: Kim Phillips <kim.phillips@freescale.com>
50010 Date: Tue Jul 17 13:57:04 2007 -0500
50012 fdt: allow for builds that don't want env and bd_t nodes
50014 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
50017 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50019 commit 91148bf7aeba142d6f348805db7625db7da64d6f
50020 Author: Kim Phillips <kim.phillips@freescale.com>
50021 Date: Tue Jul 17 13:56:53 2007 -0500
50023 fdt: do board setup based on fdt address specified on bootm line
50025 The last fdt patch to bootm did board setup based on the address
50026 specified by a prior fdt address command invocation. The bootm
50027 code, as its call to fdt_chosen does, should use the fdt specified
50028 by the user on the bootm command. Note this restores full
50029 functionality for the 8360's existing default boot environment
50030 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
50031 before booting a kernel).
50033 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50035 commit e125a2ffc209dd34794e326c7175658253beadf3
50036 Author: Gerald Van Baren <vanbaren@cideas.com>
50037 Date: Tue Jul 10 20:40:39 2007 -0400
50039 Call ft_board_setup() from the bootm command.
50041 In the patch titled "Create new fdt boardsetup command..." I removed the
50042 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
50043 to add a direct call back into cmd_bootm.c
50045 This fixes the oversight by adding the direct call to the bootm command.
50047 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50049 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
50050 Author: Gerald Van Baren <vanbaren@cideas.com>
50051 Date: Mon Jun 25 23:25:28 2007 -0400
50053 Create new fdt boardsetup command, fix bug parsing [] form of set values.
50055 Previously ft_board_setup() was called by fdt_chosen() which was not
50056 really correctly structured. This splits ft_board_setup() out by creating
50057 a new fdt boardsetup command.
50059 Fix a bug when parsing fdt set command values which have the square
50060 bracket form [00 11 22 33] - the length was updated incorrectly in when
50063 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50065 commit 6f35ded9e85493595e0eb66a82b502a95326d049
50066 Author: Gerald Van Baren <vanbaren@cideas.com>
50067 Date: Mon Jun 25 20:55:58 2007 -0400
50069 Tighten up the error messages.
50071 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50073 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
50074 Author: Gerald Van Baren <vanbaren@cideas.com>
50075 Date: Mon Jun 25 19:52:23 2007 -0400
50077 Asthetic improvements: error messages and line lengths.
50079 Tighten up the error messages, split overlength lines.
50081 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50083 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
50084 Author: Gerald Van Baren <vanbaren@cideas.com>
50085 Date: Fri May 25 22:08:57 2007 -0400
50087 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
50089 The fdt_chosen() function was adding/seting some properties ad-hoc
50090 improperly and duplicated (poorly) what was done in ft_board_setup()
50092 Clean up long lines (setting properties, printing errors).
50094 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50096 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
50097 Author: Gerald Van Baren <vanbaren@cideas.com>
50098 Date: Mon May 21 23:27:16 2007 -0400
50100 For fdt_find_node_by_path(), handle the root path properly.
50102 Also removes the special case root path detection in cmd_fdt.c since it
50103 is no longer necessary.
50105 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50107 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
50108 Author: Gerald Van Baren <vanbaren@cideas.com>
50109 Date: Thu May 17 23:54:36 2007 -0400
50111 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
50113 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
50114 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
50116 commit 1a861169bc3758f9de3aead62b058736c6891246
50117 Author: Gerald Van Baren <vanbaren@cideas.com>
50118 Date: Wed Jun 6 22:47:58 2007 -0400
50120 Replace fdt_node_offset() with fdt_find_node_by_path().
50122 The new name matches more closely the kernel's name, which is also
50123 a much better description.
50125 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
50126 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
50128 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
50129 Author: Gerald Van Baren <vanbaren@cideas.com>
50130 Date: Wed May 16 22:39:59 2007 -0400
50132 Fix cmd_fdt line lengths, refactor code.
50134 Break lines that were greater than 80 characters in length.
50135 Move the fdt print and property parsing code to separate static functions
50136 to reduce coding clutter in the fdt_cmd handling body.
50138 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50140 commit 25114033ab21788810c48ba4df103b649da1223b
50141 Author: Gerald Van Baren <vanbaren@cideas.com>
50142 Date: Sat May 12 09:47:25 2007 -0400
50144 FDT command improvements.
50146 Fix "fdt set" so that it will create a non-existing property.
50147 Add "fdt mknode" to create nodes.
50149 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50151 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
50152 Author: Gerald Van Baren <vanbaren@cideas.com>
50153 Date: Sat May 12 09:45:46 2007 -0400
50155 Reorganize and fix problems (returns) in the bootm command.
50157 Do *NOT* return after the "point of no return" has been passed.
50158 If something goes wrong, the board must be reset after that point.
50159 Move the "Transferring control to Linux" debug message back to where it
50160 belongs: just before transferring control to linux.
50162 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50164 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
50165 Author: Gerald Van Baren <vanbaren@cideas.com>
50166 Date: Tue May 8 21:27:35 2007 -0400
50168 Fix bugs in the CONFIG_OF_LIBFDT
50170 Stupid coding mistakes (identified by Timur Tabi, thanks).
50172 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50174 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
50175 Author: Gerald Van Baren <vanbaren@cideas.com>
50176 Date: Wed Apr 25 22:47:15 2007 -0400
50178 Improve fdt move length handling.
50180 Make the length parameter optional: if not specified, do the move using
50181 the current size unchanged.
50183 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50185 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
50186 Author: Gerald Van Baren <vanbaren@cideas.com>
50187 Date: Wed Apr 25 22:23:36 2007 -0400
50189 Minor code clean up.
50191 Declare the variable fdt properly as extern.
50192 Call the "set_fn" function pointer the "short way" without the full
50193 dereferencing syntax.
50195 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50197 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
50198 Author: Gerald Van Baren <vanbaren@cideas.com>
50199 Date: Wed Apr 25 21:24:27 2007 -0400
50201 Improve error messages, more informative.
50203 Print more than the raw libfdt error message strings. This is especially
50204 useful for cluing in the user when the bootm command aborts due to
50207 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50209 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
50210 Author: Gerald Van Baren <vanbaren@cideas.com>
50211 Date: Fri Apr 20 22:46:53 2007 -0400
50213 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
50215 This is the way u-boot reduces configured-out code. At Wolfgang
50216 Grandegger and Wolfgang Denk's request, make libfdt conform.
50218 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50220 commit 923efd286411ed052d9e074f59f8986d6081061c
50221 Author: Bruce Adler <bruce.adler@ccpu.com>
50222 Date: Fri Aug 10 14:54:47 2007 -0700
50224 add image size and descriptors for Spartan 3E FPGA chips
50226 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
50228 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
50230 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
50231 Author: Kim Phillips <kim.phillips@freescale.com>
50232 Date: Fri Aug 10 15:34:48 2007 -0500
50234 make MAKEALL more immune to merge conflicts
50236 ..by placing board entries one per line, as suggested by jdl.
50238 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50240 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
50241 Author: Kim Phillips <kim.phillips@freescale.com>
50242 Date: Fri Aug 10 13:28:25 2007 -0500
50244 README: Remove outdated cpu type, board type, and NAME_config lists
50246 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50248 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
50249 Author: Dave Liu <r63238@freescale.com>
50250 Date: Fri Aug 10 15:48:59 2007 +0800
50252 mpc83xx: Suppress the warning 'burstlen'
50254 suppress the warning 'burstlen' of spd_sdram.
50256 Signed-off-by: Dave Liu <daveliu@freescale.com>
50258 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
50259 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
50260 Date: Thu Aug 9 15:11:03 2007 -0500
50262 Add support for SBC8641D. Config files.
50264 Add support for Wind River's SBC8641D reference board.
50266 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
50267 Acked-by: Wolfgang Denk <wd@denx.de>
50268 Acked-by: Jon Loeliger <jdl@freescale.com>
50270 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
50271 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
50272 Date: Thu Aug 9 15:10:53 2007 -0500
50274 Add support for SBC8641D. Board files.
50276 Add support for Wind River's SBC8641D reference board.
50278 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
50279 Acked-by: Wolfgang Denk <wd@denx.de>
50280 Acked-by: Jon Loeliger <jdl@freescale.com>
50282 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
50283 Author: Stefan Roese <sr@denx.de>
50284 Date: Fri Aug 10 20:34:58 2007 +0200
50286 Conding style cleanup
50288 Signed-off-by: Stefan Roese <sr@denx.de>
50290 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
50291 Author: Sergey Kubushyn <ksi@koi8.net>
50292 Date: Fri Aug 10 20:26:18 2007 +0200
50294 [ARM] TI DaVinci support, hopefully final
50296 Add support for the following DaVinci boards:
50303 - Split into separate board directories
50304 - Removed changes to MTD_DEBUG (or whatever it's called)
50305 - New CONFIG_CMD party line followed
50306 - Some cosmetic fixes, cleanup etc.
50307 - Patches against the latest U-Boot tree as of now.
50308 - Fixed CONFIG_CMD_NET in net files.
50309 - Fixed CONFIG_CMD_EEPROM for schmoogie.
50310 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
50311 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
50312 but it at least compiles.
50314 Here is an excerpt from session log on SCHMOOGIE...
50316 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
50325 ETH PHY : DP83848 @ 0x01
50327 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
50328 U-Boot > ping 192.168.253.10
50329 host 192.168.253.10 is alive
50332 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
50333 Acked-by: Dirk Behme <dirk.behme@gmail.com>
50334 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
50335 Acked-by: Stefan Roese <sr@denx.de>
50337 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
50338 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50339 Date: Fri Jul 27 01:50:45 2007 -0500
50341 fsl_pci_init cleanup.
50343 Do not enable normal errors created during probe (master abort, perr,
50344 and pcie Invalid Configuration access).
50346 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
50348 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50349 Acked-by: Andy Fleming <afleming@freescale.com>
50351 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
50352 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50353 Date: Fri Jul 27 01:50:44 2007 -0500
50355 pciauto_setup_device bars_num fix
50357 Passing bars_num=0 to pciauto_setup_device should assign no bars.
50359 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50360 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
50361 Acked-by: Andy Fleming <afleming@freescale.com>
50363 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
50364 Author: Jon Loeliger <jdl@freescale.com>
50365 Date: Mon Aug 6 17:39:44 2007 -0500
50367 8641hpcn: Do correct sized pointer math.
50369 When I rebased Ed's patch and cleaned up a few compilation
50370 problems, I apparently rebased my brain on crack first.
50371 Fix that by doing (char *) sized pointer math as needed.
50373 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50375 commit cfc7a7f5bb3273c9951173c788001d45118f141f
50376 Author: Jon Loeliger <jdl@freescale.com>
50377 Date: Thu Aug 2 14:42:20 2007 -0500
50381 Remove rev 1 fixes.
50382 Always set PICGCR_MODE.
50383 Enable machine check and provide board config option
50384 to set and handle SoC error interrupts.
50386 Include MSSSR0 in error message.
50388 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
50390 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50391 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50393 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
50394 Author: Stefan Roese <sr@denx.de>
50395 Date: Fri Aug 10 10:42:25 2007 +0200
50397 Coding style cleanup
50399 Signed-off-by: Stefan Roese <sr@denx.de>
50401 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
50402 Author: Dirk Behme <dirk.behme@googlemail.com>
50403 Date: Thu Aug 2 17:42:08 2007 +0200
50405 Make use of generic 64bit division in nand_util.c
50407 Use generic 64bit division in nand_util.c. This makes nand_util.c
50408 independent of any toolchain 64bit division.
50410 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
50412 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
50413 Author: Dirk Behme <dirk.behme@googlemail.com>
50414 Date: Thu Aug 2 17:41:14 2007 +0200
50416 Move 64bit division from avr32 to generic lib
50418 Move the 64bit division from lib_avr32 to lib_generic. With this, all
50419 boards can do_div/__div64_32 if needed, not only avr one. Code is put
50420 to lib_generic, so no larger memory footprint if not used. No code
50421 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
50423 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
50425 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
50426 Author: Niklaus Giger <niklausgiger@gmx.ch>
50427 Date: Fri Jul 27 11:31:22 2007 +0200
50429 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
50431 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50433 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
50434 Author: Niklaus Giger <niklausgiger@gmx.ch>
50435 Date: Fri Jul 27 11:30:33 2007 +0200
50437 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
50439 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50441 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
50442 Author: Niklaus Giger <niklausgiger@gmx.ch>
50443 Date: Fri Jul 27 11:38:26 2007 +0200
50445 Add PPC4xx-HCU4 and HCU5 boards: common files
50447 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50449 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
50450 Author: Niklaus Giger <niklausgiger@gmx.ch>
50451 Date: Fri Jul 27 11:28:44 2007 +0200
50453 Add PPC4xx-HCU4 and HCU5 boards: make related
50455 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50457 commit 137fdd9f474ecb853efdace5200576308c67f18d
50458 Author: Niklaus Giger <niklausgiger@gmx.ch>
50459 Date: Fri Jul 27 11:28:03 2007 +0200
50461 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
50463 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50465 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
50466 Author: Niklaus Giger <niklausgiger@gmx.ch>
50467 Date: Fri Jul 27 11:27:15 2007 +0200
50469 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
50471 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50473 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
50474 Author: Niklaus Giger <niklausgiger@gmx.ch>
50475 Date: Fri Jul 27 11:25:31 2007 +0200
50477 Add PPC4xx-HCU4 and HCU5 boards: READMEs
50479 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50481 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
50482 Author: Niklaus Giger <niklausgiger@gmx.ch>
50483 Date: Fri Jul 27 11:37:40 2007 +0200
50485 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
50487 This series of patches adds support for 2 boards from Netstal Maschinen.
50489 The HCU4 has a PPC405Gpr and
50490 the HCU5 has a PPC440EPX.
50492 The HCU4 has a somehow complicated flash setup, as the booteprom is
50493 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
50496 The HCU5 has only a booteprom as the whole code will be downloaded from a
50497 different board which has HD, CD-ROM, etc and where all code is stored.
50499 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
50502 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
50504 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
50505 Author: Stefan Roese <sr@denx.de>
50506 Date: Fri Aug 10 08:42:55 2007 +0200
50508 ppc4xx: Update lwmon5 POST configuration
50510 Signed-off-by: Stefan Roese <sr@denx.de>
50512 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
50513 Author: Yuri Tikhonov <yur@emcraft.com>
50514 Date: Fri Aug 10 08:25:22 2007 +0200
50516 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
50518 The patch adds support for UART POST on ppc44x-based boards with no
50519 external serial clocks installed.
50521 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
50522 Acked-by: Stefan Roese <sr@denx.de>
50524 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
50525 Author: Kim Phillips <kim.phillips@freescale.com>
50526 Date: Mon Aug 6 18:18:34 2007 -0500
50528 mpc83xx: fix ITX[GP] O=builddir builds
50530 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
50532 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
50533 "BUILD_DIR=<some dir> ./MAKEALL ..."
50535 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50537 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
50538 Author: Dave Liu <r63238@freescale.com>
50539 Date: Wed Aug 1 15:00:59 2007 +0800
50541 mpc83xx: Correct the README for DDR ECC
50543 Update the README for DDR ECC, change the name
50544 to README.mpc83xx.ddrecc.
50546 Signed-off-by: Dave Liu <daveliu@freescale.com>
50547 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50549 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
50550 Author: Dave Liu <r63238@freescale.com>
50551 Date: Wed Aug 1 15:00:15 2007 +0800
50553 mpc83xx: Consolidate the ECC support of 83xx
50555 Remove the duplicated source code of ecc command on the <board>.c,
50556 for reused, move these code to cpu/mpc83xx directory.
50558 Signed-off-by: Dave Liu <daveliu@freescale.com>
50559 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50561 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
50562 Author: Dave Liu <r63238@freescale.com>
50563 Date: Sat Aug 4 13:37:39 2007 +0800
50565 mpc83xx: Correct the burst length for DDR2 with 32 bits
50567 The burst length should be 4 for DDR2 with 32 bits bus
50569 Signed-off-by: Dave Liu <daveliu@freescale.com>
50571 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
50572 Author: Kim Phillips <kim.phillips@freescale.com>
50573 Date: Wed Jul 25 19:25:33 2007 -0500
50575 mpc83xx: add support for the MPC8323E RDB
50577 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
50578 five 10/100 ethernet ports connected via an ICPlus IP175C
50579 switch, one PCI slot, and serial. Features not supported
50580 in this patch are SD card interface, 2 USB ports, and the
50583 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
50584 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50586 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
50587 Author: Kim Phillips <kim.phillips@freescale.com>
50588 Date: Wed Jul 25 19:25:28 2007 -0500
50590 mpc83xx: fixup generic pci for libfdt
50592 add libfdt support to the generic 83xx pci code
50594 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50596 commit f57ac7a7b37109245b69db80839ebee26179966a
50597 Author: Kim Phillips <kim.phillips@freescale.com>
50598 Date: Wed Jul 25 19:25:22 2007 -0500
50600 mpc83xx: fix 8360 and cpu functions to update fdt being passed
50602 ..and not the global fdt. Rename local fdt vars to blob so as not to
50603 be confused with the global var with the same three-letter name.
50605 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50607 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
50608 Author: Jerry Van Baren <gvb.uboot@gmail.com>
50609 Date: Wed Jul 4 21:34:24 2007 -0400
50611 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
50613 Several node strings were not correct (trailing slashes and properties
50615 Added setting of the timebase-frequency.
50616 Improved error messages and use debug() instead of printf().
50618 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
50619 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50621 commit 26d02c9bbac1751c5e19294f000100b48d43a920
50622 Author: Jerry Van Baren <gvb.uboot@gmail.com>
50623 Date: Wed Jul 4 21:27:30 2007 -0400
50625 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
50627 The new name matches more closely the kernel's name, which is also
50628 a much better description.
50630 These are the mpc83xx changes made necessary by the function name change.
50632 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
50633 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
50634 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50636 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
50637 Author: Dave Liu <daveliu@freescale.com>
50638 Date: Mon Jun 25 10:41:56 2007 +0800
50640 mpc83xx: Add support for the display of reset status
50642 83xx processor family has many reset sources, such as
50643 power on reset, software hard reset, software soft reset,
50644 JTAG, bus monitor, software watchdog, check stop reset,
50645 external hard reset, external software reset.
50646 sometimes, to figure out the fault of system, we need to
50647 know the cause of reset early before the prompt of
50650 Signed-off-by: Dave Liu <daveliu@freescale.com>
50651 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50653 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
50654 Author: Dave Liu <daveliu@freescale.com>
50655 Date: Mon Jun 25 10:41:04 2007 +0800
50657 mpc83xx: Fix the align bug of SDMA buffer
50659 According to the latest user manual, the SDMA temporary
50660 buffer base address must be 4KB aligned.
50662 Signed-off-by: Dave Liu <daveliu@freescale.com>
50663 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50665 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
50666 Author: Dave Liu <daveliu@freescale.com>
50667 Date: Mon Jun 25 13:21:12 2007 +0800
50669 mpc83xx: Revise the MPC8360EMDS readme doc
50671 When the rev2.x silicon mount on the MPC8360EMDS baord,
50672 and if you are using the u-boot version after the commit
50673 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
50674 to make the ethernet interface usable, we have to setup
50675 the jumpers correctly.
50677 Signed-off-by: Dave Liu <daveliu@freescale.com>
50678 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50680 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
50681 Author: Timur Tabi <timur@freescale.com>
50682 Date: Tue Jul 3 13:46:32 2007 -0500
50684 FSL I2C driver programs the two I2C busses differently
50686 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
50687 The second I2C bus has its slave address programmed incorrectly and is
50688 missing a 5-us delay.
50690 Signed-off-by: Timur Tabi <timur@freescale.com>
50691 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50693 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
50694 Author: Timur Tabi <timur@freescale.com>
50695 Date: Tue Jul 3 13:04:34 2007 -0500
50697 Update SCCR programming in cpu_init_f() to support all 83xx processors
50699 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
50700 bitfields for all 83xx processors. The code to update some bitfields was
50701 compiled only on some processors. Now, the bitfields are programmed as long
50702 as the corresponding CFG_SCCR option is defined in the board header file.
50703 This means that the board header file should not define any CFG_SCCR macros
50704 for bitfields that don't exist on that processor, otherwise the SCCR will be
50705 programmed incorrectly.
50707 Signed-off-by: Timur Tabi <timur@freescale.com>
50708 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50710 commit 9546266999f0b9b51372636614211b88d90f0f25
50711 Author: Martin Krause <martin.krause@tqs.de>
50712 Date: Fri Jun 22 13:04:22 2007 +0200
50714 TQM834x: cleanup configuraton
50716 Remove irritating #undef DEBUG
50718 Signed-off-by: Martin Krause <martin.krause@tqs.de>
50719 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50721 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
50722 Author: david.saada <David.Saada@ecitele.com>
50723 Date: Mon Jun 18 09:09:53 2007 -0700
50725 MPC83xx: Fix makefile to generate config.h file in the build directory
50727 MPC83xx: Fix the Makefile config sections to generate the include/config.h
50728 file in the build directory instead of the source directory.
50730 Signed-off-by: David Saada <david.saada@ecitele.com>
50731 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50733 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
50734 Author: Lee Nipper <Lee.Nipper@freescale.com>
50735 Date: Thu Jun 14 20:07:33 2007 -0500
50737 mpc83xx: Add support for 8360 silicon revision 2.1
50739 This change adds 8360 silicon revision 2.1 support to u-boot.
50741 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
50742 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50744 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
50745 Author: Kumar Gala <galak@kernel.crashing.org>
50746 Date: Wed Aug 8 04:14:28 2007 -0500
50748 Treat ppc64 host as ppc
50750 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
50752 commit 0dc4279b08ff82472bec2e2c90858602459febe8
50753 Author: Jason Jin <Jason.jin@freescale.com>
50754 Date: Wed Aug 8 09:01:46 2007 +0800
50756 Minor fix for bios emulator makefile
50758 Add $(obj) to LIB avoiding objects be built in the source dir
50760 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50762 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
50763 Author: Jason Jin <Jason.jin@freescale.com>
50764 Date: Wed Aug 8 08:33:11 2007 +0800
50766 Add CONFIG_BIOSEMU define to guard all the bios emulator code
50768 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50770 This patch fix the compile issue on the board that did not enable the bios emulator
50772 commit ed8106433522f2ea8933e9808346860d061d7731
50773 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
50774 Date: Tue Jul 31 12:27:25 2007 -0500
50776 tsec: fix multiple PHY support
50778 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
50779 broke multiple PHY support in tsec.c. This fixes it.
50781 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
50782 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
50784 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
50785 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
50786 Date: Thu Aug 9 09:08:18 2007 -0500
50788 tsec: Allow Ten Bit Interface address to be configurable
50790 Allow the address of the Ten Bit Interface (TBI) to be changed in the
50791 event of a conflict with another device.
50793 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
50795 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
50796 Author: Stefan Roese <sr@denx.de>
50797 Date: Wed Aug 8 09:54:26 2007 +0200
50799 Coding style cleanup
50801 Signed-off-by: Stefan Roese <sr@denx.de>
50803 commit a41de1f0d373e09c782dea558385a06247111ba5
50804 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50805 Date: Sun Aug 5 05:15:18 2007 -0500
50807 Port enabled for I2C signals and chipselects port configuration.
50809 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50811 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
50812 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50813 Date: Sun Aug 5 04:31:18 2007 -0500
50817 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50819 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
50820 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50821 Date: Sun Aug 5 04:11:20 2007 -0500
50825 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50827 commit 99c03c175d2689093176facf17c58ce2cb320001
50828 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50829 Date: Sun Aug 5 03:58:52 2007 -0500
50831 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
50833 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50835 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
50836 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50837 Date: Sun Aug 5 03:55:21 2007 -0500
50839 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
50841 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50843 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
50844 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50845 Date: Sun Aug 5 03:43:30 2007 -0500
50847 Moved sync() from board file to include/asm-m68k/io.h
50849 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50851 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
50852 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50853 Date: Sun Aug 5 03:30:44 2007 -0500
50855 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
50857 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50859 commit 9998bd37ead85e93953559720710d3b0685c81e6
50860 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50861 Date: Sun Aug 5 03:19:10 2007 -0500
50863 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
50865 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50867 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
50868 Author: Jason Jin <Jason.jin@freescale.com>
50869 Date: Tue Aug 7 16:17:06 2007 +0800
50871 Add CONFIG_BIOSEMU define to guard all the bios emulator code
50873 This patch fix the compile issue on the board that did not enable the bios emulator
50875 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
50876 Author: Wolfgang Denk <wd@denx.de>
50877 Date: Tue Aug 7 16:02:13 2007 +0200
50879 Fix missing brace error in fs/fat/fat.c
50880 [pointed out by Roderik Wildenburg]
50882 Signed-off-by: Wolfgang Denk <wd@denx.de>
50884 commit 706714d97a0d08d59eda4de2268c39f504688329
50885 Author: Michal Simek <monstr@monstr.eu>
50886 Date: Mon Aug 6 23:41:53 2007 +0200
50888 [FIX] remove cute code
50890 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
50891 Author: Michal Simek <monstr@monstr.eu>
50892 Date: Mon Aug 6 23:35:26 2007 +0200
50894 [FIX] Fix romfs code
50896 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
50897 Author: Michal Simek <monstr@monstr.eu>
50898 Date: Mon Aug 6 23:31:49 2007 +0200
50900 [FIX] Coding style cleanup - Wolfgang's suggestions
50902 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
50903 Author: Wolfgang Denk <wd@denx.de>
50904 Date: Mon Aug 6 23:21:05 2007 +0200
50906 Fixed typo in README (pointed out by Martin Jost).
50908 Signed-off-by: Wolfgang Denk <wd@denx.de>
50910 commit 537223afa61f64480df31ce440a9cb386df4a814
50911 Author: Stefan Roese <sr@denx.de>
50912 Date: Mon Aug 6 21:10:17 2007 +0200
50914 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
50916 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
50917 here an updated Bamboo README.
50919 Signed-off-by: Stefan Roese <sr@denx.de>
50921 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
50922 Author: Wolfgang Denk <wd@denx.de>
50923 Date: Mon Aug 6 02:17:36 2007 +0200
50925 Coding style cleanup. Update CHANGELOG.
50927 Signed-off-by: Wolfgang Denk <wd@denx.de>
50929 commit 221838cc7eb178370ff62aa05920a582e12ac322
50930 Author: Jason Jin <Jason.jin@freescale.com>
50931 Date: Tue Jul 10 09:03:22 2007 +0800
50933 Remove the bios emulator from MAI board.
50935 The bios emulator in the MAI board can not pass compile
50936 and have a lot of crap in it. remove it and will have a
50937 clean and small bios emulator in the drivers directory
50938 which can be uesed for every board.
50940 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50942 commit 5618332409bb96f4448d1712899369fc80c0b489
50943 Author: Jason Jin <Jason.jin@freescale.com>
50944 Date: Fri Jul 13 12:14:59 2007 +0800
50946 Fix some compile issues for MAI board.
50948 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50950 commit 0f460a1ee148b648ee242c3157650287d4296260
50951 Author: Jason Jin <Jason.jin@freescale.com>
50952 Date: Fri Jul 13 12:14:58 2007 +0800
50954 Configurations for ATI video card BIOS emulator
50956 This patch add definition of the BIOS emulator and the ATI framebuffer
50957 driver for MPC8641HPCN board.
50959 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50960 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
50962 commit ece92f85053b8df613edcf05b26a416cbc3d629c
50963 Author: Jason Jin <Jason.jin@freescale.com>
50964 Date: Fri Jul 6 08:34:56 2007 +0800
50966 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
50967 ATI video card BIOS. and can be used for x86 code emulation by some
50970 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50972 commit 5072188acabde3178fac7f5a597150e6e74fd40c
50973 Author: Jason Jin <Jason.jin@freescale.com>
50974 Date: Fri Jul 6 08:33:33 2007 +0800
50976 This is a framebuffer driver for ATI video card, can work for PCI9200,
50977 X300, X700, X800 ATI video cards.
50979 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
50980 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50982 commit 5728be389e65fd47f34b33c2596271eb4db751ae
50983 Author: Wolfgang Denk <wd@denx.de>
50984 Date: Mon Aug 6 01:01:49 2007 +0200
50986 Coding style cleanup. Update CHANGELOG.
50988 Signed-off-by: Wolfgang Denk <wd@denx.de>
50990 commit 8092fef4c29b395958bb649647da7e3775731517
50991 Author: Martin Krause <Martin.Krause@tqs.de>
50992 Date: Tue Dec 12 14:26:01 2006 +0100
50994 Add functions to list of exported functions
50996 Additionally export the following fuctions (to make trab_config build again):
51000 Also bump the ABI version to reflect this change
51002 Signed-off-by: Martin Krause <martin.krause@tqs.de>
51004 commit 63cec5814fab5d2b1c86982327433807a5ac0249
51005 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51006 Date: Thu Aug 2 14:09:49 2007 -0500
51008 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
51010 All of the PCI/PCI-Express driver and initialization code that
51011 was in the MPC8641HPCN port has now been moved into the common
51012 drivers/fsl_pci_init.c. In a subsequent patch, this will be
51013 utilized by the 85xx ports as well.
51015 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
51017 Also enable the second PCI-Express controller on 8641
51018 by getting its BATS and CFG_ setup right.
51020 Fixed a u16 vendor compiler warning in AHCI driver too.
51022 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51023 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
51024 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51026 commit a274ca4f6d68830e7c916f897561cff8c4101c38
51027 Author: Michal Simek <monstr@monstr.eu>
51028 Date: Sun Aug 5 22:33:05 2007 +0200
51030 [FIX] Coding style cleanup
51032 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
51033 Author: Michal Simek <monstr@monstr.eu>
51034 Date: Sun Aug 5 16:13:31 2007 +0200
51036 [FIX] Xilinx Uartlite driver
51037 Because PPC405 can use UARTLITE serial interface and
51038 Microblaze can use Uart16550 serial interface not only Uartlite.
51040 commit 98889edd50aadf862071eb5664747ad0d568a20e
51041 Author: Michal Simek <monstr@monstr.eu>
51042 Date: Sun Aug 5 15:54:53 2007 +0200
51044 [FIX] Change configuration for XUPV2P Microblaze board
51046 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
51047 Author: Michal Simek <monstr@monstr.eu>
51048 Date: Sun Aug 5 15:53:50 2007 +0200
51050 [PATCH] Added support for Xilinx Emac community driver
51052 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
51053 Author: Bartlomiej Sieka <tur@semihalf.com>
51054 Date: Fri Aug 3 12:08:16 2007 +0200
51056 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
51058 Add the ability for modules from the Schindler cm5200 family to use a
51059 single U-Boot image:
51060 - rename cm1_qp1 to cm5200
51061 - add run-time module detection
51062 - parametrize SDRAM configuration according to the module we are running on
51064 Few minor, board-specific fixes included in this patch:
51065 - better MAC address handling
51066 - updated default environment ('update' command uses +{filesize} now)
51067 - improved error messages in the auto-update code
51068 - allow booting U-Boot from RAM (CFG_RAMBOOT)
51070 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
51071 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
51072 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
51074 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
51075 Author: Andy Fleming <afleming@freescale.com>
51076 Date: Fri Aug 3 04:05:25 2007 -0500
51078 Add Marvell 1149 PHY support to the TSEC
51080 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
51081 Author: Wolfgang Denk <wd@denx.de>
51082 Date: Thu Aug 2 21:27:46 2007 +0200
51084 Coding style cleanup, update CHANGELOG
51086 Signed-off-by: Wolfgang Denk <wd@denx.de>
51088 commit 63e22764d2f8653f68888c667eb65b3996b52680
51089 Author: Wolfgang Denk <wd@denx.de>
51090 Date: Thu Aug 2 10:11:18 2007 +0200
51092 Minor cleanup of <board>_nand build rules.
51094 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
51095 Author: Stefan Roese <sr@denx.de>
51096 Date: Thu Aug 2 08:33:56 2007 +0200
51098 ppc4xx: Code cleanup
51100 Signed-off-by: Stefan Roese <sr@denx.de>
51102 commit c92409812206ac67a7fa7aae298539a9c3804a46
51103 Author: Grzegorz Bernacki <gjb@semihalf.com>
51104 Date: Tue Jul 31 18:51:48 2007 +0200
51106 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
51108 During config transactions on the PCIe bus an attempt to scan for a
51109 non-existent device can lead to a machine check exception with certain
51110 peripheral devices. In order to avoid crashing in such scenarios the
51111 instrumented versions of the config cycle read routines are introduced, so
51112 the exceptions fixups framework can gracefully recover.
51114 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
51115 Acked-by: Rafal Jaworowski <raj@semihalf.com>
51117 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
51118 Author: Rafal Jaworowski <raj@semihalf.com>
51119 Date: Tue Jul 31 18:19:54 2007 +0200
51121 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
51123 This brings back separate settings for PCIe bus numbers depending on chip
51124 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
51125 commit. 440SPe rev. A does NOT work properly with the same settings as for
51126 the rev. B (no devices are seen on the bus during enumeration).
51128 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
51130 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
51131 Author: Wolfgang Denk <wd@denx.de>
51132 Date: Thu Aug 2 00:48:45 2007 +0200
51134 Fix build errors and warnings / code cleanup.
51136 Signed-off-by: Wolfgang Denk <wd@denx.de>
51138 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
51139 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
51140 Date: Tue Jul 31 10:24:56 2007 +0200
51142 ppc4xx: Update AMCC Bamboo 440EP support
51144 Changed storage type of cfg_simulate_spd_eeprom to const
51145 Changed storage type of gpio_tab to stack storage
51146 (Cannot access global data declarations in .bss until afer code relocation)
51148 Improved SDRAM tests to catch problems where data is not uniquely addressable
51149 (e.g. incorrectly programmed SDRAM row or columns)
51151 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
51152 Fixed AM29LV320DT (OpCode Flash) sector map
51154 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
51155 Signed-off-by: Stefan Roese <sr@denx.de>
51157 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
51158 Author: Stefan Roese <sr@denx.de>
51159 Date: Tue Jul 31 08:37:01 2007 +0200
51161 ppc4xx: Update 440EPx lwmon5 board support
51163 - Clear ECC status regs after ECC POST test
51164 - Set dcbz for ECC generation with caches enabled as default
51167 Signed-off-by: Stefan Roese <sr@denx.de>
51169 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
51170 Author: Stefan Roese <sr@denx.de>
51171 Date: Mon Jul 30 11:04:57 2007 +0200
51173 ppc4xx: Only print ECC related info when the error bis are set
51175 Signed-off-by: Stefan Roese <sr@denx.de>
51177 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
51178 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51179 Date: Fri Jul 27 16:44:31 2007 +0200
51181 new FPGA image for PLU405 board
51183 new FPGA image for PLU405 board with improved CompactFlash timing
51185 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51187 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
51188 Author: Rafal Jaworowski <raj@semihalf.com>
51189 Date: Fri Jul 27 14:43:59 2007 +0200
51191 [ADS5121] Support for the ADS5121 board
51193 The following MPC5121e subsystems are supported:
51195 - low-level CPU init
51196 - NOR Boot Flash (common CFI driver)
51202 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
51203 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
51204 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
51206 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
51207 Author: Rafal Jaworowski <raj@semihalf.com>
51208 Date: Fri Jul 27 14:22:04 2007 +0200
51210 [PPC] Remove unused MSR_USER definition
51212 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
51214 commit d4024bb72dd81695ec099b2199eda0d27c623e62
51215 Author: John Otken <john@softadvances.com>
51216 Date: Thu Jul 26 17:49:11 2007 +0200
51218 ppc4xx: Add support for AMCC 405EP Taihu board
51220 Signed-off-by: John Otken <john@softadvances.com>
51222 commit b66091de6c7390620312c2501db23d8391e7cabb
51223 Author: Anatolij Gustschin <agust@denx.de>
51224 Date: Thu Jul 26 15:08:01 2007 +0200
51226 ppc4xx: lwmon5: Update Lime initialization
51228 Change Lime SDRAM initialization to now support 100MHz and
51229 133MHz (if enabled). Also the framebuffer is initialized to
51230 display a blue rectangle with a white border.
51232 Signed-off-by: Anatolij Gustschin <agust@denx.de>
51233 Signed-off-by: Stefan Roese <sr@denx.de>
51235 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
51236 Author: Stefan Roese <sr@denx.de>
51237 Date: Tue Jul 24 09:52:52 2007 +0200
51239 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
51241 The used Intel NOR FLASH chips have internally two dies, and are now
51242 treated as two seperate chips.
51244 Signed-off-by: Stefan Roese <sr@denx.de>
51246 commit aedf5bde179ecfbd0a96130d18996a96518b785f
51247 Author: Stefan Roese <sr@denx.de>
51248 Date: Tue Jul 24 07:20:09 2007 +0200
51250 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
51252 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
51253 interrupt controller.
51255 Signed-off-by: Stefan Roese <sr@denx.de>
51257 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
51258 Author: Stefan Roese <sr@denx.de>
51259 Date: Fri Jul 20 15:03:44 2007 +0200
51261 ppc4xx: Fix bug with default GPIO output value
51263 As spotted by Matthias Fuchs, the default output values for all GPIO1
51264 outputs were not setup correctly. This patch fixes this issue.
51266 Signed-off-by: Stefan Roese <sr@denx.de>
51268 commit 531e3e8b831f357056448fa573137d5fb37000fd
51269 Author: Pavel Kolesnikov <concord@emcraft.com>
51270 Date: Fri Jul 20 15:03:03 2007 +0200
51272 POST: Add ECC POST for the lwmon5 board
51274 This patch adds ECC Post test for the Lwmon5 board based
51275 on PPC440EPx to U-Boot.
51277 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
51278 Acked-by: Yuri Tikhonov <yur@emcraft.com>
51279 Acked-by: Stefan Roese <sr@denx.de>
51281 commit cc3023b9f95d7ac959a764471a65001062aecf41
51282 Author: Rafal Jaworowski <raj@semihalf.com>
51283 Date: Thu Jul 19 17:12:28 2007 +0200
51285 Fix breakage of 8xx boards from recent commit.
51287 This patch fixes the negative consequences for 8xx of the recent
51288 "ppc4xx: Clean up 440 exceptions handling" commit.
51290 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
51292 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
51293 Author: Stefan Roese <sr@denx.de>
51294 Date: Mon Jul 16 13:11:12 2007 +0200
51296 Coding style cleanup
51298 Signed-off-by: Stefan Roese <sr@denx.de>
51300 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
51301 Author: Stefan Roese <sr@denx.de>
51302 Date: Mon Jul 16 10:02:12 2007 +0200
51304 ppc4xx: Code cleanup
51306 Signed-off-by: Stefan Roese <sr@denx.de>
51308 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
51309 Author: Stefan Roese <sr@denx.de>
51310 Date: Mon Jul 16 10:01:38 2007 +0200
51312 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
51314 Signed-off-by: Stefan Roese <sr@denx.de>
51316 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
51317 Author: Stefan Roese <sr@denx.de>
51318 Date: Mon Jul 16 10:00:43 2007 +0200
51320 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
51322 The new boardspecific DDR2 controller configuration is used for the Yucca
51323 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
51325 Signed-off-by: Stefan Roese <sr@denx.de>
51327 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
51328 Author: Stefan Roese <sr@denx.de>
51329 Date: Mon Jul 16 09:57:00 2007 +0200
51331 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
51333 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
51334 support non default, boardspecific DDR(2) controller configuration.
51336 Signed-off-by: Stefan Roese <sr@denx.de>
51338 commit 5743a9207a370b90f09b20ebd61167c806b937f3
51339 Author: Stefan Roese <sr@denx.de>
51340 Date: Mon Jul 16 08:53:51 2007 +0200
51342 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
51344 The new function remove_tlb() can be used to remove the TLB's used to
51345 map a specific memory region. This is especially useful for the DDR(2)
51346 setup routines which configure the SDRAM area temporarily as a cached
51347 area (for speedup on auto-calibration and ECC generation) and later
51348 need this area uncached for normal usage.
51350 Signed-off-by: Stefan Roese <sr@denx.de>
51352 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
51353 Author: Michal Simek <monstr@monstr.eu>
51354 Date: Mon Jul 16 00:31:07 2007 +0200
51356 [PATCH] Support for Xilinx EmacLite controller
51358 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
51359 Author: Wolfgang Denk <wd@denx.de>
51360 Date: Sat Jul 14 22:51:02 2007 +0200
51364 Signed-off-by: Wolfgang Denk <wd@denx.de>
51366 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
51367 Author: Michal Simek <monstr@monstr.eu>
51368 Date: Sat Jul 14 13:11:28 2007 +0200
51370 [FIX] support for simply measuring time
51372 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
51373 Author: Michal Simek <monstr@monstr.eu>
51374 Date: Sat Jul 14 12:41:23 2007 +0200
51376 [FS] Added support for ROMFS
51378 commit 011595307731a7a67a7445d107c279d031e8ab97
51379 Author: Heiko Schocher <hs@pollux.denx.de>
51380 Date: Sat Jul 14 01:06:58 2007 +0200
51382 [PCS440EP] - fix compile error, if BUILD_DIR is used
51384 commit 5a2f1098d81ad58b309e5e558d0492643166a799
51385 Author: Michal Simek <monstr@monstr.eu>
51386 Date: Sat Jul 14 00:18:48 2007 +0200
51388 [PATCH] Support time without timer
51390 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
51391 Author: Michal Simek <monstr@monstr.eu>
51392 Date: Fri Jul 13 21:43:55 2007 +0200
51394 [PATCH] Remove problem with disabled BARREL SHIFTER
51396 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
51397 Author: Michal Simek <monstr@monstr.eu>
51398 Date: Fri Jul 13 21:41:44 2007 +0200
51400 [FIX] correct help for rspr
51402 commit fad63407154f46246ce80d53a9c669a44362ac67
51403 Author: Heiko Schocher <hs@pollux.denx.de>
51404 Date: Fri Jul 13 09:54:17 2007 +0200
51406 make show_boot_progress () weak.
51408 Signed-off-by: Heiko Schocher <hs@denx.de>
51410 commit 907902472391b6ca1876ec300687562ecaf459b1
51411 Author: Heiko Schocher <hs@pollux.denx.de>
51412 Date: Fri Jul 13 08:26:05 2007 +0200
51414 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
51415 - fix compile error, if BUILD_DIR is used
51417 Signed-off-by: Heiko Schocher <hs@denx.de>
51419 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
51420 Author: Stefan Roese <sr@denx.de>
51421 Date: Thu Jul 12 16:32:08 2007 +0200
51423 ppc4xx: Change receive buffer handling in the 4xx emac driver
51425 This change fixes a bug in the receive buffer handling, that
51426 could lead to problems upon high network traffic (broadcasts...).
51428 Signed-off-by: Stefan Roese <sr@denx.de>
51430 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
51431 Author: Wolfgang Denk <wd@denx.de>
51432 Date: Thu Jul 12 01:45:34 2007 +0200
51434 Update CHANGELOG, minor coding style cleanup.
51436 Signed-off-by: Wolfgang Denk <wd@denx.de>
51438 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
51439 Author: Andy Fleming <afleming@freescale.com>
51440 Date: Fri Jun 8 16:41:18 2007 -0500
51442 Remove erroneous errata code from Marvel 88E1111S driver
51444 The Marvel 88E1111S driver for the TSEC was copied from the
51445 88E1101 driver, and included a fix for an erratum which does not
51446 exist on that part. Now it is removed
51448 Signed-off-by: Andy Fleming <afleming@freescale.com>
51450 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
51451 Author: Andy Fleming <afleming@freescale.com>
51452 Date: Tue Jun 5 16:38:44 2007 -0500
51454 From: eran liberty <eran.liberty@gmail.com>
51456 adds the reset register to 85xx immap
51458 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
51459 Signed-off-by: Andy Fleming <afleming@freescale.com>
51461 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
51462 Author: Andy Fleming <afleming@freescale.com>
51463 Date: Thu May 10 17:50:01 2007 -0500
51465 Polished the 85xx ADS config files
51467 Made the boot commands use device trees by default.
51468 Also moved the ramdisk to 1000000 (I think the previous address
51469 was getting overridden during boot).
51471 Signed-off-by: Andy Fleming <afleming@freescale.com>
51473 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
51474 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51475 Date: Wed May 9 11:03:32 2007 -0500
51477 8544ds: Fix Makefile after moving pixis to board/freescale.
51479 The OBJTREE != SRCTREE build scenario was broken.
51482 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51483 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51485 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
51486 Author: Andy Fleming <afleming@freescale.com>
51487 Date: Wed May 9 00:54:20 2007 -0500
51489 tsec: Fix PHY code to match first driver
51491 Jarrold Wen noticed that the generic PHY code always matches
51492 under the current implementation. Change it so the first match
51493 wins, and *only* unknown PHYs trigger the generic driver
51495 Signed-off-by: Andy Fleming <afleming@freescale.com>
51497 commit ccc091aac61a38cd998d575d92f7232e256d6312
51498 Author: Andy Fleming <afleming@freescale.com>
51499 Date: Tue May 8 17:27:43 2007 -0500
51501 Add support for CPM device tree configuration to 8560 ADS
51503 * Adds code to modify CPM frequencies
51504 * Cleans up the config file to #define TSEC and (for now) #undef FCC
51505 * Adds the MII command for all 8560 ADS configurations
51506 * Updates config file to provide convenience commands for booting
51509 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
51510 Signed-off-by: Andy Fleming <afleming@freescale.com>
51512 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
51513 Author: Andy Fleming <afleming@freescale.com>
51514 Date: Tue May 8 17:23:02 2007 -0500
51516 Fix Marvell 88e1145 PHY init code
51518 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
51519 where the reset was being done after the errata code instead of
51522 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
51523 Signed-off-by: Andy Fleming <afleming@freescale.com>
51525 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
51526 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51527 Date: Wed Jul 11 14:52:16 2007 -0500
51529 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
51531 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51533 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
51534 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51535 Date: Wed Jul 11 14:52:08 2007 -0500
51537 pciauto setup bridge
51539 The P2P bridge bus numbers programmed into the device are relative to
51542 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51544 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
51545 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51546 Date: Wed Jul 11 14:52:01 2007 -0500
51548 Support PCIe extended config registers
51550 FSL PCIe block has extended cfg registers in the 100 and 400 range.
51551 For example, to read the LTSSM register: pci display <busn>.0 404 1
51553 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51555 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
51556 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51557 Date: Wed Jul 11 14:51:48 2007 -0500
51559 Minor improvements to drivers/pci_auto.c
51561 - Make pciauto_{pre,post}scan_setup_bridge non-static
51562 - Added physical address display in debug messages.
51564 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51566 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
51567 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
51568 Date: Wed Jul 11 14:51:35 2007 -0500
51570 Start pci hose scan from hose->current_busno.
51572 Ensure hose->current_busno is not less than first_busno. This fixes
51573 broken board code which leaves current_busno=0 when first_busno is
51574 greater than 0 for the cases with multiple controllers.
51576 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
51578 commit 3865b1fb7843a08ad49a6319a36415752276ff48
51579 Author: Stefan Roese <sr@denx.de>
51580 Date: Wed Jul 11 12:13:53 2007 +0200
51582 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
51584 Signed-off-by: Stefan Roese <sr@denx.de>
51586 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
51587 Author: Bartlomiej Sieka <tur@semihalf.com>
51588 Date: Wed Jul 11 20:11:07 2007 +0200
51590 CM1.QP1: Support for the Schindler CM1.QP1 board.
51592 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
51593 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
51595 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
51596 Author: Heiko Schocher <hs@pollux.denx.de>
51597 Date: Wed Jul 11 18:39:11 2007 +0200
51599 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
51600 - now the Flash ST M29W040B is supported (not tested)
51601 - fix the "led" command
51602 - fix compile error, if BUILD_DIR is used
51604 Signed-off-by: Heiko Schocher <hs@denx.de>
51606 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
51607 Author: Stefan Roese <sr@denx.de>
51608 Date: Sun Jul 8 13:44:27 2007 +0200
51610 Fix malloc problem introduced with the relocation fixup for the PPC platform
51612 The relocation fixup didn't handle the malloc pointer initialization
51613 correctly. This patch fixes this problem. Tested successfully on 4xx.
51614 The relocation fixup patches for 4xx will follow soon.
51616 Signed-off-by: Stefan Roese <sr@denx.de>
51618 commit 0dca874db62718e41253659e60f3a1de7eb418ce
51619 Author: TsiChung <tcliew@Goku.(none)>
51620 Date: Tue Jul 10 15:45:43 2007 -0500
51622 Cache update and added CFG_UNIFY_CACHE
51624 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
51626 Signed-off-by: TsiChung <tcliew@Goku.(none)>
51628 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
51629 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51630 Date: Thu Jul 5 23:36:16 2007 -0500
51632 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
51634 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
51636 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51638 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
51639 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51640 Date: Thu Jul 5 23:31:25 2007 -0500
51642 Update header files
51644 Include immap.h and renamed mcfrtc.h to rtc.h
51646 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51648 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
51649 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51650 Date: Thu Jul 5 23:29:21 2007 -0500
51652 Add mcffec_initialize()
51654 Added mcffec_initialize() in eth_initialize()
51656 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51658 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
51659 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51660 Date: Thu Jul 5 23:27:40 2007 -0500
51662 Update header file and clean up
51666 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51668 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
51669 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51670 Date: Thu Jul 5 23:23:15 2007 -0500
51672 New uart structure and defines
51674 Seperated from mcfuart.h
51676 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51678 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
51679 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51680 Date: Thu Jul 5 23:22:31 2007 -0500
51682 New timer structure and defines
51684 Seperated from mcftimer.h
51686 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51688 commit e04acb2eba4782489417240eff76e20e176aec10
51689 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51690 Date: Thu Jul 5 23:21:09 2007 -0500
51692 Rename mcfrtc to rtc
51694 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
51696 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51698 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
51699 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51700 Date: Thu Jul 5 23:17:36 2007 -0500
51702 Rename mcfserial.c. Update include header
51704 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
51706 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51708 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
51709 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51710 Date: Thu Jul 5 23:13:58 2007 -0500
51712 Header file update, clean up and cache handling
51714 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
51716 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51718 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
51719 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51720 Date: Thu Jul 5 23:10:40 2007 -0500
51722 Create interrupts.c and modify Makefile
51724 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
51726 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51728 commit ddd104f1ed655eda50c06ba636237a83ed943f34
51729 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51730 Date: Thu Jul 5 23:06:55 2007 -0500
51734 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51736 commit b9bf3de377b2bae70c983c9b97feae914999e735
51737 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51738 Date: Thu Jul 5 23:05:31 2007 -0500
51740 Update header file and some clean up
51742 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
51744 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51746 commit 84a015b52ec820a5ae173717d78516de731c89c2
51747 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51748 Date: Thu Jul 5 23:03:28 2007 -0500
51750 Update header file and enable icache
51752 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
51754 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51756 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
51757 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51758 Date: Thu Jul 5 23:01:22 2007 -0500
51760 Update header file and removed interrupt_init()
51762 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
51764 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51766 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
51767 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51768 Date: Thu Jul 5 22:57:46 2007 -0500
51770 Update for flash.o and mii.o
51772 Removed flash.o and added mii.o
51774 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51776 commit c5ded275d839e4ff79f41718d50a835d989f57bc
51777 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51778 Date: Thu Jul 5 22:56:19 2007 -0500
51780 MII functions calls.
51782 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51784 commit 427c814104560e29bda14955c67703245aaaa5b4
51785 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51786 Date: Thu Jul 5 22:54:42 2007 -0500
51788 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
51790 The removed MII routines will be placed in mii.c.
51792 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51794 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
51795 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51796 Date: Thu Jul 5 22:51:05 2007 -0500
51800 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
51802 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51804 commit 2744354a8437b8f78db178e30660215688bff570
51805 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51806 Date: Thu Jul 5 22:46:38 2007 -0500
51808 Seperate old structure defines and new structure defines
51810 Removed new uart structure and defines to uart.h
51812 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51814 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
51815 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51816 Date: Thu Jul 5 22:45:01 2007 -0500
51818 Seperate old structure defines and new structure defines
51820 New timer structure and defines will move to new timer.h
51822 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51824 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
51825 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51826 Date: Thu Jul 5 22:42:23 2007 -0500
51832 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51834 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
51835 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51836 Date: Thu Jul 5 22:41:24 2007 -0500
51840 Replaced whitespace with tabs
51842 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51844 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
51845 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51846 Date: Thu Jul 5 22:39:07 2007 -0500
51848 Create new header file and move peripherals base address from configs file to new header file.
51850 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
51852 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51854 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
51855 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51856 Date: Thu Jul 5 22:24:58 2007 -0500
51860 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
51862 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51864 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
51865 Author: Jon Loeliger <jdl@freescale.com>
51866 Date: Tue Jul 10 11:19:50 2007 -0500
51868 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
51870 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51871 Those always evaluated TRUE, and thus were always compiled
51872 even when IDE really wasn't defined/wanted.
51874 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51876 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
51877 Author: Jon Loeliger <jdl@freescale.com>
51878 Date: Tue Jul 10 11:13:21 2007 -0500
51880 drivers/: Remove lingering references to CFG_CMD_* symbols.
51882 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51883 Those always evaluated TRUE, and thus were always compiled
51884 even when IDE really wasn't defined/wanted.
51886 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51888 commit f40a7f3e3888b42a43674b099e5470022c8c544c
51889 Author: Jon Loeliger <jdl@freescale.com>
51890 Date: Tue Jul 10 11:07:56 2007 -0500
51892 fs/: Remove lingering references to CFG_CMD_* symbols.
51894 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51895 Those always evaluated TRUE, and thus were always compiled
51896 even when IDE really wasn't defined/wanted.
51898 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51900 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
51901 Author: Jon Loeliger <jdl@freescale.com>
51902 Date: Tue Jul 10 11:05:02 2007 -0500
51904 net/: Remove lingering references to CFG_CMD_* symbols.
51906 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51907 Those always evaluated TRUE, and thus were always compiled
51908 even when IDE really wasn't defined/wanted.
51910 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51912 commit 902531788376046da212afd1661cffb62f3daa1c
51913 Author: Jon Loeliger <jdl@freescale.com>
51914 Date: Tue Jul 10 11:02:44 2007 -0500
51916 common/: Remove lingering references to CFG_CMD_* symbols.
51918 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51919 Those always evaluated TRUE, and thus were always compiled
51920 even when IDE really wasn't defined/wanted.
51922 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51924 commit d39b57415838c73fb0a37eca84de3c68ba990586
51925 Author: Jon Loeliger <jdl@freescale.com>
51926 Date: Tue Jul 10 10:48:22 2007 -0500
51928 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
51930 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51931 Those always evaluated TRUE, and thus were always compiled
51932 even when IDE really wasn't defined/wanted.
51934 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51936 commit 77a318545d57aefa844752465b94c7e09a3f26d0
51937 Author: Jon Loeliger <jdl@freescale.com>
51938 Date: Tue Jul 10 10:39:10 2007 -0500
51940 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
51942 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51943 Those always evaluated TRUE, and thus were always compiled
51944 even when IDE really wasn't defined/wanted.
51946 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51948 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
51949 Author: Jon Loeliger <jdl@freescale.com>
51950 Date: Tue Jul 10 10:27:39 2007 -0500
51952 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
51954 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51956 commit 079a136c3588814784561d6e4856970ee82d6e2a
51957 Author: Jon Loeliger <jdl@freescale.com>
51958 Date: Tue Jul 10 10:12:10 2007 -0500
51960 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
51962 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51963 used to be included but CONFIG_BOOTP_MASK was not defined.
51965 Remove lingering references to CFG_CMD_* symbols.
51967 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51969 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
51970 Author: Jon Loeliger <jdl@freescale.com>
51971 Date: Tue Jul 10 09:38:02 2007 -0500
51973 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
51975 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51976 used to be included but CONFIG_BOOTP_MASK was not defined.
51978 Remove lingering references to CFG_CMD_* symbols.
51980 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51982 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
51983 Author: Jon Loeliger <jdl@freescale.com>
51984 Date: Tue Jul 10 09:29:01 2007 -0500
51986 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
51988 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51989 used to be included but CONFIG_BOOTP_MASK was not defined.
51991 Remove lingering references to CFG_CMD_* symbols.
51993 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51995 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
51996 Author: Jon Loeliger <jdl@freescale.com>
51997 Date: Tue Jul 10 09:22:23 2007 -0500
51999 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
52001 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
52002 used to be included but CONFIG_BOOTP_MASK was not defined.
52004 Remove lingering references to CFG_CMD_* symbols.
52006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52008 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
52009 Author: Jon Loeliger <jdl@freescale.com>
52010 Date: Tue Jul 10 09:10:49 2007 -0500
52012 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
52014 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
52015 used to be included but CONFIG_BOOTP_MASK was not defined.
52017 Remove lingering references to CFG_CMD_* symbols.
52019 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52021 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
52022 Author: Jon Loeliger <jdl@freescale.com>
52023 Date: Tue Jul 10 09:02:57 2007 -0500
52025 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
52027 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
52028 used to be included but CONFIG_BOOTP_MASK was not defined.
52030 Remove lingering references to CFG_CMD_* symbols.
52032 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52034 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
52035 Author: Jon Loeliger <jdl@freescale.com>
52036 Date: Mon Jul 9 22:08:34 2007 -0500
52038 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
52040 All of the choices for CONFIG_BOOTP_ are now documented in
52041 the README file. You must now individually select exactly
52042 the set that you want using a series of
52043 #define CONFIG_BOOTP_<x>
52044 statements in the board port config files now.
52046 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52048 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
52049 Author: Jon Loeliger <jdl@freescale.com>
52050 Date: Mon Jul 9 21:57:31 2007 -0500
52052 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
52054 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52056 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
52057 Author: Jon Loeliger <jdl@freescale.com>
52058 Date: Mon Jul 9 21:48:26 2007 -0500
52060 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
52062 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52064 commit 37d4bb70586659dedef1658ce1bed071be098aec
52065 Author: Jon Loeliger <jdl@freescale.com>
52066 Date: Mon Jul 9 21:38:02 2007 -0500
52068 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
52070 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52072 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
52073 Author: Jon Loeliger <jdl@freescale.com>
52074 Date: Mon Jul 9 21:31:24 2007 -0500
52076 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
52078 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52080 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
52081 Author: Jon Loeliger <jdl@freescale.com>
52082 Date: Mon Jul 9 21:24:19 2007 -0500
52084 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
52086 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52088 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
52089 Author: Jon Loeliger <jdl@freescale.com>
52090 Date: Mon Jul 9 21:16:53 2007 -0500
52092 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
52094 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52096 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
52097 Author: Jon Loeliger <jdl@freescale.com>
52098 Date: Mon Jul 9 19:12:30 2007 -0500
52100 Retire CONFIG_COMMANDS finally.
52101 Strip old CFG_CMD_* symbols out.
52103 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52105 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
52106 Author: Jon Loeliger <jdl@freescale.com>
52107 Date: Mon Jul 9 19:10:03 2007 -0500
52109 Update README.* to reference new CONFIG_CMD_* names now.
52111 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52113 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
52114 Author: Jon Loeliger <jdl@freescale.com>
52115 Date: Mon Jul 9 19:06:00 2007 -0500
52117 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
52119 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52121 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
52122 Author: Jon Loeliger <jdl@freescale.com>
52123 Date: Mon Jul 9 18:57:22 2007 -0500
52125 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
52127 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52129 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
52130 Author: Jon Loeliger <jdl@freescale.com>
52131 Date: Mon Jul 9 18:45:16 2007 -0500
52133 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
52135 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52137 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
52138 Author: Jon Loeliger <jdl@freescale.com>
52139 Date: Mon Jul 9 18:38:39 2007 -0500
52141 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
52143 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52145 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
52146 Author: Jon Loeliger <jdl@freescale.com>
52147 Date: Mon Jul 9 18:31:28 2007 -0500
52149 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
52151 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52153 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
52154 Author: Jon Loeliger <jdl@freescale.com>
52155 Date: Mon Jul 9 18:24:55 2007 -0500
52157 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
52159 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52161 commit fcec2eb93e126400009729328e797f12bc94f1fd
52162 Author: Jon Loeliger <jdl@freescale.com>
52163 Date: Mon Jul 9 18:19:09 2007 -0500
52165 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
52167 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52169 commit a593814f2be0c9cdc3133cd550b167b8a988328f
52170 Author: Jon Loeliger <jdl@freescale.com>
52171 Date: Mon Jul 9 18:10:50 2007 -0500
52173 rtc/: Remove obsolete references to CONFIG_COMMANDS
52175 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52177 commit 67350568f9d46e66c21829f3513b3db0caeb948b
52178 Author: Jon Loeliger <jdl@freescale.com>
52179 Date: Mon Jul 9 18:05:38 2007 -0500
52181 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
52183 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52185 commit 7def6b34f910f08d7ef0a14646da067719237ca2
52186 Author: Jon Loeliger <jdl@freescale.com>
52187 Date: Mon Jul 9 18:02:11 2007 -0500
52189 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
52191 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52193 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
52194 Author: Jon Loeliger <jdl@freescale.com>
52195 Date: Mon Jul 9 17:56:50 2007 -0500
52197 fs/: Remove obsolete references to CONFIG_COMMANDS
52199 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52201 commit c91898bbc505aff3e12a807af88e76da18efb7ee
52202 Author: Jon Loeliger <jdl@freescale.com>
52203 Date: Mon Jul 9 17:46:09 2007 -0500
52205 tools/: Remove obsolete references to CONFIG_COMMANDS
52207 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52209 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
52210 Author: Jon Loeliger <jdl@freescale.com>
52211 Date: Mon Jul 9 17:45:14 2007 -0500
52213 net/: Remove obsolete references to CONFIG_COMMANDS
52215 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52217 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
52218 Author: Jon Loeliger <jdl@freescale.com>
52219 Date: Mon Jul 9 17:39:42 2007 -0500
52221 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
52223 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52225 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
52226 Author: Jon Loeliger <jdl@freescale.com>
52227 Date: Mon Jul 9 17:30:01 2007 -0500
52229 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
52231 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52233 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
52234 Author: Jon Loeliger <jdl@freescale.com>
52235 Date: Mon Jul 9 17:22:37 2007 -0500
52237 disk/: Remove obsolete references to CONFIG_COMMANDS
52239 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52241 commit 639221c76c88215bd55af83ad174fc30d1940f8f
52242 Author: Jon Loeliger <jdl@freescale.com>
52243 Date: Mon Jul 9 17:15:49 2007 -0500
52245 include/: Remove obsolete references to CONFIG_COMMANDS
52246 Mostly removed from comments here.
52248 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52250 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
52251 Author: Wolfgang Denk <wd@denx.de>
52252 Date: Tue Jul 10 00:01:28 2007 +0200
52254 Coding style cleanup; update CHANGELOG.
52256 Signed-off-by: Wolfgang Denk <wd@denx.de>
52258 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
52259 Author: Stefan Roese <sr@denx.de>
52260 Date: Mon Jul 9 11:00:24 2007 +0200
52262 Small coding style cleanup
52264 Signed-off-by: Stefan Roese <sr@denx.de>
52266 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
52267 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52268 Date: Mon Jul 9 10:10:08 2007 +0200
52270 Migrate esd 405EP boards to new NAND subsystem
52272 Remove unused CFG_NAND_LEGACY define
52274 These boards to not have NAND.
52276 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52278 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
52279 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52280 Date: Mon Jul 9 10:10:06 2007 +0200
52282 Migrate esd 405EP boards to new NAND subsystem
52284 Migrate esd 405EP boards to new NAND subsystem
52287 -use correct io accessors (in/out_be32())
52289 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52291 commit e09f7ab5749c345f924da272bea0521a73af5b11
52292 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52293 Date: Mon Jul 9 10:10:04 2007 +0200
52295 Migrate esd 405EP boards to new NAND subsystem
52297 This patch prepares the migration from the legacy NAND driver
52298 to U-Boot's new NAND subsystem for esd boards.
52300 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52302 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
52303 Author: Jon Loeliger <jdl@freescale.com>
52304 Date: Sun Jul 8 18:10:08 2007 -0500
52306 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
52308 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52310 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
52311 Author: Jon Loeliger <jdl@freescale.com>
52312 Date: Sun Jul 8 18:05:39 2007 -0500
52314 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
52316 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52318 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
52319 Author: Jon Loeliger <jdl@freescale.com>
52320 Date: Sun Jul 8 18:02:23 2007 -0500
52322 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
52324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52326 commit baa26db4113679b80970ff447d91cc10217742a6
52327 Author: Jon Loeliger <jdl@freescale.com>
52328 Date: Sun Jul 8 17:51:39 2007 -0500
52330 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
52332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52334 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
52335 Author: Jon Loeliger <jdl@freescale.com>
52336 Date: Sun Jul 8 17:02:01 2007 -0500
52338 Clear up confusion over the CMD_POST and POST_DIAG mess.
52340 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
52341 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
52342 Clear this mess up some.
52344 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52346 commit b3631487105a57ab7cbadfc26efbaf9676275018
52347 Author: Jon Loeliger <jdl@freescale.com>
52348 Date: Sun Jul 8 15:45:08 2007 -0500
52350 Remove references to the old cmd_confdefs.h include file.
52352 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52354 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
52355 Author: Jon Loeliger <jdl@freescale.com>
52356 Date: Sun Jul 8 15:42:59 2007 -0500
52358 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
52360 Use new CONFIG_CMD_* in lwmon5.h board config file.
52361 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
52363 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52365 commit a5562901661bd428f7e5feb333f796372cb81019
52366 Author: Jon Loeliger <jdl@freescale.com>
52367 Date: Sun Jul 8 15:31:57 2007 -0500
52369 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
52371 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52373 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
52374 Author: Jon Loeliger <jdl@freescale.com>
52375 Date: Sun Jul 8 15:02:44 2007 -0500
52377 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
52379 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52381 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
52382 Author: Jon Loeliger <jdl@freescale.com>
52383 Date: Sun Jul 8 15:12:40 2007 -0500
52385 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
52387 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52389 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
52390 Author: Jon Loeliger <jdl@freescale.com>
52391 Date: Sun Jul 8 14:55:07 2007 -0500
52393 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
52395 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52397 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
52398 Author: Jon Loeliger <jdl@freescale.com>
52399 Date: Sun Jul 8 14:49:44 2007 -0500
52401 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
52403 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52405 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
52406 Author: Jon Loeliger <jdl@freescale.com>
52407 Date: Sun Jul 8 14:21:43 2007 -0500
52409 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
52411 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52413 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
52414 Author: Jon Loeliger <jdl@freescale.com>
52415 Date: Sun Jul 8 14:14:17 2007 -0500
52417 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
52419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52421 commit 348f258f24253433e4a2302a0bbceb6740a67246
52422 Author: Jon Loeliger <jdl@freescale.com>
52423 Date: Sun Jul 8 13:46:18 2007 -0500
52425 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
52427 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52429 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
52430 Author: Jon Loeliger <jdl@freescale.com>
52431 Date: Sun Jul 8 10:09:35 2007 -0500
52433 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
52435 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52437 commit 60a0876b5106b34220e459c208bbf648073306c0
52438 Author: Jon Loeliger <jdl@freescale.com>
52439 Date: Sat Jul 7 21:04:26 2007 -0500
52441 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
52443 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52445 commit dcaa71562826a2466e894c868d132509dcda8444
52446 Author: Jon Loeliger <jdl@freescale.com>
52447 Date: Sat Jul 7 20:56:05 2007 -0500
52449 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
52451 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52453 commit 3c3227f3c737502311b25b72084573901cbbf17d
52454 Author: Jon Loeliger <jdl@freescale.com>
52455 Date: Sat Jul 7 20:40:43 2007 -0500
52457 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
52459 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52461 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
52462 Author: Jon Loeliger <jdl@freescale.com>
52463 Date: Thu Jul 5 19:52:35 2007 -0500
52465 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
52467 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52469 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
52470 Author: Jon Loeliger <jdl@freescale.com>
52471 Date: Thu Jul 5 19:32:07 2007 -0500
52473 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
52475 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52477 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
52478 Author: Jon Loeliger <jdl@freescale.com>
52479 Date: Thu Jul 5 19:13:52 2007 -0500
52481 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
52483 Since ADS860.h includes "board/fads/fads.h" with ramifications
52484 on the CONFIG_COMMAND treatment, it too has to be adjusted to
52485 exclude already configured commands in this same commit.
52487 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52489 commit 10e038932f22ee80ebd53de312531e70e6590a2f
52490 Author: Thomas Knobloch <knobloch@siemens.com>
52491 Date: Fri Jul 6 14:58:39 2007 +0200
52493 [NAND] Bad block skipping for command nboot
52495 The old implementation of command nboot does not support reading the image from
52496 NAND flash with skipping of bad blocks. The patch implements a new version of
52497 the nboot command: by calling nboot.jffs2 from the u-boot command line the
52498 command will load the image from NAND flash with respect to bad blocks (by using
52499 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
52502 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
52503 Signed-off-by: Stefan Roese <sr@denx.de>
52505 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
52506 Author: Stefan Roese <sr@denx.de>
52507 Date: Fri Jul 6 12:26:51 2007 +0200
52509 ppc4xx: Update lwmon5 default environment
52511 Signed-off-by: Stefan Roese <sr@denx.de>
52513 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
52514 Author: Stefan Roese <sr@denx.de>
52515 Date: Fri Jul 6 11:48:24 2007 +0200
52517 ppc4xx: Update lwmon5 board
52519 Add unlock=yes environment variable to default variables to unlock
52520 the CFI flash by default.
52522 Signed-off-by: Stefan Roese <sr@denx.de>
52524 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
52525 Author: Stefan Roese <sr@denx.de>
52526 Date: Fri Jul 6 09:45:47 2007 +0200
52528 Fix problem with get/setdcr commands introduced by cfg patches
52530 Signed-off-by: Stefan Roese <sr@denx.de>
52532 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
52533 Author: Wolfgang Denk <wd@denx.de>
52534 Date: Fri Jul 6 02:50:19 2007 +0200
52536 Code cleanup and default config update for STC GP3 SSA board.
52538 Signed-off-by: Wolfgang Denk <wd@denx.de>
52540 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
52541 Author: Wolfgang Denk <wd@denx.de>
52542 Date: Thu Jul 5 17:56:27 2007 +0200
52544 Fixing some typos etc. introduced mainly by cfg patches.
52546 Signed-off-by: Wolfgang Denk <wd@denx.de>
52548 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
52549 Author: Wolfgang Denk <wd@denx.de>
52550 Date: Thu Jul 5 11:12:16 2007 +0200
52552 Minor coding style cleanup. Update CHANGELOG.
52554 commit dca3b3d6d6396b67e5e84af53452164923c73443
52555 Author: Jon Loeliger <jdl@jdl.com>
52556 Date: Wed Jul 4 22:33:46 2007 -0500
52558 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
52560 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52562 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
52563 Author: Jon Loeliger <jdl@jdl.com>
52564 Date: Wed Jul 4 22:33:38 2007 -0500
52566 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
52568 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52570 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
52571 Author: Jon Loeliger <jdl@jdl.com>
52572 Date: Wed Jul 4 22:33:30 2007 -0500
52574 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
52576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52578 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
52579 Author: Jon Loeliger <jdl@jdl.com>
52580 Date: Wed Jul 4 22:33:23 2007 -0500
52582 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
52584 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52586 commit 26a34560d56a9df5bc2ae23525d9229736134757
52587 Author: Jon Loeliger <jdl@jdl.com>
52588 Date: Wed Jul 4 22:33:17 2007 -0500
52590 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
52592 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52594 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
52595 Author: Jon Loeliger <jdl@jdl.com>
52596 Date: Wed Jul 4 22:33:13 2007 -0500
52598 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
52600 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52602 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
52603 Author: Jon Loeliger <jdl@jdl.com>
52604 Date: Wed Jul 4 22:33:07 2007 -0500
52606 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
52608 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52610 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
52611 Author: Jon Loeliger <jdl@jdl.com>
52612 Date: Wed Jul 4 22:33:01 2007 -0500
52614 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
52616 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52618 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
52619 Author: Jon Loeliger <jdl@jdl.com>
52620 Date: Wed Jul 4 22:32:57 2007 -0500
52622 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
52624 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52626 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
52627 Author: Jon Loeliger <jdl@jdl.com>
52628 Date: Wed Jul 4 22:32:51 2007 -0500
52630 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
52632 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52634 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
52635 Author: Jon Loeliger <jdl@jdl.com>
52636 Date: Wed Jul 4 22:32:32 2007 -0500
52638 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
52640 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52642 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
52643 Author: Jon Loeliger <jdl@jdl.com>
52644 Date: Wed Jul 4 22:32:25 2007 -0500
52646 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
52648 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52650 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
52651 Author: Jon Loeliger <jdl@jdl.com>
52652 Date: Wed Jul 4 22:32:19 2007 -0500
52654 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
52656 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52658 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
52659 Author: Jon Loeliger <jdl@jdl.com>
52660 Date: Wed Jul 4 22:32:10 2007 -0500
52662 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
52664 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52666 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
52667 Author: Jon Loeliger <jdl@jdl.com>
52668 Date: Wed Jul 4 22:32:03 2007 -0500
52670 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
52672 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52674 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
52675 Author: Jon Loeliger <jdl@jdl.com>
52676 Date: Wed Jul 4 22:31:56 2007 -0500
52678 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
52680 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52682 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
52683 Author: Jon Loeliger <jdl@jdl.com>
52684 Date: Wed Jul 4 22:31:49 2007 -0500
52686 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
52688 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52690 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
52691 Author: Jon Loeliger <jdl@jdl.com>
52692 Date: Wed Jul 4 22:31:42 2007 -0500
52694 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
52696 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52698 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
52699 Author: Jon Loeliger <jdl@jdl.com>
52700 Date: Wed Jul 4 22:31:35 2007 -0500
52702 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
52704 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52706 commit d794cfefead5fc177cf4f41164e80382e9c9484a
52707 Author: Jon Loeliger <jdl@jdl.com>
52708 Date: Wed Jul 4 22:31:15 2007 -0500
52710 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
52712 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52714 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
52715 Author: Jon Loeliger <jdl@jdl.com>
52716 Date: Wed Jul 4 22:31:07 2007 -0500
52718 include/configs: Use new CONFIG_CMD_* in STx board config files.
52720 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52722 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
52723 Author: Jon Loeliger <jdl@jdl.com>
52724 Date: Wed Jul 4 22:30:58 2007 -0500
52726 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
52728 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52730 commit 2694690e285acaa34922f55f4b5ae030da60c55a
52731 Author: Jon Loeliger <jdl@jdl.com>
52732 Date: Wed Jul 4 22:30:50 2007 -0500
52734 include/configs: Use new CONFIG_CMD_* in TQM board config files.
52736 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52738 commit 1cc4c458329765b58e584a19821e796b3c10e976
52739 Author: Jon Loeliger <jdl@jdl.com>
52740 Date: Wed Jul 4 22:30:28 2007 -0500
52742 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
52744 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52746 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
52747 Author: Jon Loeliger <jdl@jdl.com>
52748 Date: Wed Jul 4 22:30:06 2007 -0500
52750 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
52752 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52754 commit b44896215a09c60fa40cae906f7ed207bbc2c492
52755 Author: Sergei Poselenov <sposelenov@emcraft.com>
52756 Date: Thu Jul 5 08:17:37 2007 +0200
52758 Merged POST framework with the current TOT.
52760 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
52762 commit b24629fa377214d63bb40d1360e354b6d3e4af56
52763 Author: Jon Loeliger <jdl@jdl.com>
52764 Date: Wed Jun 13 13:23:15 2007 -0500
52766 mpc86xx: Remove old CFG_CMD_* references.
52768 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52770 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
52771 Author: Jon Loeliger <jdl@jdl.com>
52772 Date: Wed Jun 13 13:22:54 2007 -0500
52774 Add MPC8568MDS to MAKEALL 85xx target.
52776 It was missing from the original port submission.
52778 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52780 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
52781 Author: Jon Loeliger <jdl@jdl.com>
52782 Date: Wed Jun 13 13:22:08 2007 -0500
52784 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
52786 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52788 commit 56b304ac2091689506088a9ae67f63fd6300cf16
52789 Author: Jon Loeliger <jdl@jdl.com>
52790 Date: Wed Jun 13 13:21:37 2007 -0500
52792 Fix #if typo in CONFIG_CMD_* changes.
52794 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52796 commit f780b83316d9af1f61d71cc88b1917b387b9b995
52797 Author: Niklaus Giger <niklausgiger@gmx.ch>
52798 Date: Wed Jun 27 18:11:38 2007 +0200
52800 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
52802 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
52804 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
52805 Author: Stefan Roese <sr@denx.de>
52806 Date: Wed Jul 4 10:06:30 2007 +0200
52808 ppc4xx: Update lwmon5 board
52810 - Add optional ECC generation routine to preserve existing
52811 RAM values. This is needed for the Linux log-buffer support
52812 - Add optional DDR2 setup with CL=4
52813 - GPIO50 not used anymore
52814 - Lime register setup added
52816 Signed-off-by: Stefan Roese <sr@denx.de>
52818 commit 6810a34677dbc446334f5e451f1682426dd33b49
52819 Author: Grant Likely <grant.likely@secretlab.ca>
52820 Date: Tue Jul 3 00:17:28 2007 -0600
52822 Fix Makefile to use $(MKCONFIG) macro for all board ports
52824 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52826 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
52827 Author: Grant Likely <grant.likely@secretlab.ca>
52828 Date: Tue Jul 3 00:17:28 2007 -0600
52830 Fix Makefile to use $(MKCONFIG) macro for all board ports
52832 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52834 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
52835 Author: Grant Likely <grant.likely@secretlab.ca>
52836 Date: Tue Jul 3 00:34:49 2007 -0600
52838 Correct fixup relocation for mpc83xx
52840 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52842 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
52843 Author: Grant Likely <grant.likely@secretlab.ca>
52844 Date: Tue Jul 3 00:34:44 2007 -0600
52846 Correct fixup relocation for mpc8260
52848 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52850 commit f3a52fe05923935db86985daf9438e2f70ac39aa
52851 Author: Grant Likely <grant.likely@secretlab.ca>
52852 Date: Tue Jul 3 00:34:39 2007 -0600
52854 Correct fixup relocation for mpc824x
52856 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52858 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
52859 Author: Grant Likely <grant.likely@secretlab.ca>
52860 Date: Tue Jul 3 00:34:34 2007 -0600
52862 Correct fixup relocation for mpc8220
52864 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52866 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
52867 Author: Grant Likely <grant.likely@secretlab.ca>
52868 Date: Tue Jul 3 00:34:29 2007 -0600
52870 Correct fixup relocation for MPC5xxx
52872 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52874 commit 3649cd99ba815b6601868735765602f00ef3692b
52875 Author: Grant Likely <grant.likely@secretlab.ca>
52876 Date: Tue Jul 3 00:34:24 2007 -0600
52878 Correct relocation fixup for mpc5xx
52880 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52882 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
52883 Author: Grant Likely <grant.likely@secretlab.ca>
52884 Date: Tue Jul 3 00:34:19 2007 -0600
52886 Don't set gd->reloc_off if relocation of .fixup works correctly
52888 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52890 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
52891 Author: Grant Likely <grant.likely@secretlab.ca>
52892 Date: Tue Jul 3 00:34:14 2007 -0600
52894 Remove obsolete mpc83xx linker scripts
52896 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52898 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
52899 Author: Grant Likely <grant.likely@secretlab.ca>
52900 Date: Tue Jul 3 00:34:09 2007 -0600
52902 Consolidate mpc8260 linker scripts
52904 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52906 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
52907 Author: Grant Likely <grant.likely@secretlab.ca>
52908 Date: Tue Jul 3 00:34:04 2007 -0600
52910 Remove obsolete mpc824x linker scripts
52912 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52914 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
52915 Author: Grant Likely <grant.likely@secretlab.ca>
52916 Date: Tue Jul 3 00:33:59 2007 -0600
52918 Remove obsolete mpc824x linker scripts (3 of 4)
52920 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52922 commit a71c084f3ac7fedf144537db2b2da47323068833
52923 Author: Grant Likely <grant.likely@secretlab.ca>
52924 Date: Tue Jul 3 00:33:53 2007 -0600
52926 Remove obsolete mpc824x linker scripts (2 of 4)
52928 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52930 commit f670a15468d1365241d40022b9408e1004181f5e
52931 Author: Grant Likely <grant.likely@secretlab.ca>
52932 Date: Tue Jul 3 00:33:48 2007 -0600
52934 Remove obsolete mpc824x linker scripts (1 of 4)
52936 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52938 commit 09555bd45a04c0e54f172528d21bc18896550d28
52939 Author: Grant Likely <grant.likely@secretlab.ca>
52940 Date: Tue Jul 3 00:33:43 2007 -0600
52942 Remove obsolete mpc8220 linker scripts
52944 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52946 commit 5efb992f046e51225c93d52f80fecbe433abd789
52947 Author: Grant Likely <grant.likely@secretlab.ca>
52948 Date: Tue Jul 3 00:33:38 2007 -0600
52950 Remove obsolete mpc5xxx linker scripts (3 of 3)
52952 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52954 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
52955 Author: Grant Likely <grant.likely@secretlab.ca>
52956 Date: Tue Jul 3 00:33:33 2007 -0600
52958 Remove obsolete mpc5xxx linker scripts (2 of 3)
52960 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52962 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
52963 Author: Grant Likely <grant.likely@secretlab.ca>
52964 Date: Tue Jul 3 00:33:28 2007 -0600
52966 Remove obsolete mpc5xxx linker scripts (1 of 3)
52968 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52970 commit b7d8e05f8675249b5f208aa73babeed384a4519d
52971 Author: Grant Likely <grant.likely@secretlab.ca>
52972 Date: Tue Jul 3 00:33:23 2007 -0600
52974 Remove obsolete mpc5xx linker scripts
52976 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52978 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
52979 Author: Grant Likely <grant.likely@secretlab.ca>
52980 Date: Tue Jul 3 00:33:18 2007 -0600
52982 Consolidate mpc83xx linker scripts
52984 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52986 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
52987 Author: Grant Likely <grant.likely@secretlab.ca>
52988 Date: Tue Jul 3 00:33:13 2007 -0600
52990 Consolidate mpc8260 linker scripts
52992 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52994 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
52995 Author: Grant Likely <grant.likely@secretlab.ca>
52996 Date: Tue Jul 3 00:33:08 2007 -0600
52998 Consolidate mpc824x linker scripts
53000 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
53002 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
53003 Author: Grant Likely <grant.likely@secretlab.ca>
53004 Date: Tue Jul 3 00:33:03 2007 -0600
53006 Consolidate mpc8220 linker scripts
53008 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
53010 commit d181c9a15cd41863fe24840d17848429f27d3c8c
53011 Author: Grant Likely <grant.likely@secretlab.ca>
53012 Date: Tue Jul 3 00:32:58 2007 -0600
53014 Consolidate mpc5xxx linker scripts
53016 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
53018 commit 287ac924adb7291bebe5086652a362a30ab28b13
53019 Author: Grant Likely <grant.likely@secretlab.ca>
53020 Date: Tue Jul 3 00:32:53 2007 -0600
53022 Consolidate mpc5xx linker scripts
53024 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
53026 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
53027 Author: Wolfgang Denk <wd@denx.de>
53028 Date: Wed Jul 4 00:43:53 2007 +0200
53030 Fix a few file permission problems.
53032 Signed-off-by: Wolfgang Denk <wd@denx.de>
53034 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
53035 Author: Wolfgang Denk <wd@denx.de>
53036 Date: Wed Jul 4 00:38:38 2007 +0200
53038 Minor coding style cleanup. Rebuild CHANGELOG file.
53040 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
53041 Author: Jon Loeliger <jdl@jdl.com>
53042 Date: Mon Jun 11 19:03:44 2007 -0500
53044 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
53046 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53048 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
53049 Author: Jon Loeliger <jdl@jdl.com>
53050 Date: Mon Jun 11 19:03:39 2007 -0500
53052 README: Rewrite command line config to use CONFIG_CMD_* names.
53054 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53056 commit 72a074cec68e5bad60d63206c050974e08afd804
53057 Author: Jon Loeliger <jdl@jdl.com>
53058 Date: Mon Jun 11 19:03:34 2007 -0500
53060 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53062 This is a compatibility step that allows both the older form
53063 and the new form to co-exist for a while until the older can
53064 be removed entirely.
53066 All transformations are of the form:
53068 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53070 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53072 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53074 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
53075 Author: Jon Loeliger <jdl@jdl.com>
53076 Date: Mon Jun 11 19:03:28 2007 -0500
53078 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53080 This is a compatibility step that allows both the older form
53081 and the new form to co-exist for a while until the older can
53082 be removed entirely.
53084 All transformations are of the form:
53086 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53088 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53090 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53092 commit 9107ebe0d352420895ab69b715697bdebc8caf50
53093 Author: Jon Loeliger <jdl@jdl.com>
53094 Date: Mon Jun 11 19:03:23 2007 -0500
53096 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53098 This is a compatibility step that allows both the older form
53099 and the new form to co-exist for a while until the older can
53100 be removed entirely.
53102 All transformations are of the form:
53104 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53106 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53108 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53110 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
53111 Author: Jon Loeliger <jdl@jdl.com>
53112 Date: Mon Jun 11 19:03:19 2007 -0500
53114 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53116 This is a compatibility step that allows both the older form
53117 and the new form to co-exist for a while until the older can
53118 be removed entirely.
53120 All transformations are of the form:
53122 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53124 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53126 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53128 commit 737184114ec9c9e0ab94d6713536126073bd2472
53129 Author: Jon Loeliger <jdl@jdl.com>
53130 Date: Mon Jun 11 19:03:15 2007 -0500
53132 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53134 This is a compatibility step that allows both the older form
53135 and the new form to co-exist for a while until the older can
53136 be removed entirely.
53138 All transformations are of the form:
53140 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53142 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53144 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53146 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
53147 Author: Jon Loeliger <jdl@jdl.com>
53148 Date: Mon Jun 11 19:03:08 2007 -0500
53150 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53152 This is a compatibility step that allows both the older form
53153 and the new form to co-exist for a while until the older can
53154 be removed entirely.
53156 All transformations are of the form:
53158 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53160 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53162 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53164 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
53165 Author: Jon Loeliger <jdl@jdl.com>
53166 Date: Mon Jun 11 19:03:03 2007 -0500
53168 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53170 This is a compatibility step that allows both the older form
53171 and the new form to co-exist for a while until the older can
53172 be removed entirely.
53174 All transformations are of the form:
53176 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53178 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53180 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53182 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
53183 Author: Jon Loeliger <jdl@jdl.com>
53184 Date: Mon Jun 11 19:02:58 2007 -0500
53186 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53188 This is a compatibility step that allows both the older form
53189 and the new form to co-exist for a while until the older can
53190 be removed entirely.
53192 All transformations are of the form:
53194 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53196 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53198 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53200 commit 98b79003c21c2578206003256de4e781d6b36ca8
53201 Author: Jon Loeliger <jdl@jdl.com>
53202 Date: Mon Jun 11 19:02:53 2007 -0500
53204 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53206 This is a compatibility step that allows both the older form
53207 and the new form to co-exist for a while until the older can
53208 be removed entirely.
53210 All transformations are of the form:
53212 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53214 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53216 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53218 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
53219 Author: Jon Loeliger <jdl@jdl.com>
53220 Date: Mon Jun 11 19:02:49 2007 -0500
53222 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53224 This is a compatibility step that allows both the older form
53225 and the new form to co-exist for a while until the older can
53226 be removed entirely.
53228 All transformations are of the form:
53230 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53232 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53234 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53236 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
53237 Author: Jon Loeliger <jdl@jdl.com>
53238 Date: Mon Jun 11 19:02:34 2007 -0500
53240 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53242 This is a compatibility step that allows both the older form
53243 and the new form to co-exist for a while until the older can
53244 be removed entirely.
53246 All transformations are of the form:
53248 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53250 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53252 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53254 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
53255 Author: Jon Loeliger <jdl@jdl.com>
53256 Date: Mon Jun 11 19:02:20 2007 -0500
53258 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53260 This is a compatibility step that allows both the older form
53261 and the new form to co-exist for a while until the older can
53262 be removed entirely.
53264 All transformations are of the form:
53266 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53268 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53270 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53272 commit d5be43de93ff905c465e509d45a3164ef48d26e7
53273 Author: Jon Loeliger <jdl@jdl.com>
53274 Date: Mon Jun 11 19:02:10 2007 -0500
53276 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53278 This is a compatibility step that allows both the older form
53279 and the new form to co-exist for a while until the older can
53280 be removed entirely.
53282 All transformations are of the form:
53284 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53286 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53288 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53290 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
53291 Author: Jon Loeliger <jdl@jdl.com>
53292 Date: Mon Jun 11 19:02:05 2007 -0500
53294 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53296 This is a compatibility step that allows both the older form
53297 and the new form to co-exist for a while until the older can
53298 be removed entirely.
53300 All transformations are of the form:
53302 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53304 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53306 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53308 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
53309 Author: Jon Loeliger <jdl@jdl.com>
53310 Date: Mon Jun 11 19:01:54 2007 -0500
53312 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53314 This is a compatibility step that allows both the older form
53315 and the new form to co-exist for a while until the older can
53316 be removed entirely.
53318 All transformations are of the form:
53320 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53322 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53326 commit a76adc8142c1d956385a109e0b70f9319ede4d66
53327 Author: Jon Loeliger <jdl@jdl.com>
53328 Date: Mon Jun 11 19:01:43 2007 -0500
53330 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
53332 This is a compatibility step that allows both the older form
53333 and the new form to co-exist for a while until the older can
53334 be removed entirely.
53336 All transformations are of the form:
53338 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
53340 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
53342 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53344 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
53345 Author: Jon Loeliger <jdl@jdl.com>
53346 Date: Mon Jun 11 19:01:34 2007 -0500
53348 Introduce initial versions of new Command Config files.
53350 Derive three new files from cmd_confdefs.h:
53351 config_bootp.h - Has BOOTP related config options, not commands
53352 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
53353 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
53355 For now, include "config_bootp.h" for compatability until all
53356 users of it directly include it properly.
53358 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53360 commit 1f2a05898658900dc5717761e27abf2052e67e13
53361 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
53362 Date: Sat Jun 30 18:50:48 2007 +0200
53366 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
53368 commit a5d71e290f3673269be8eefb4ec44f53412f9461
53369 Author: Heiko Schocher <hs@pollux.denx.de>
53370 Date: Mon Jun 25 19:11:37 2007 +0200
53372 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
53374 Signed-off-by: Heiko Schocher <hs@denx.de>
53376 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
53377 Author: Niklaus Giger <niklaus.giger@nestal.com>
53378 Date: Mon Jun 25 17:03:13 2007 +0200
53380 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
53382 This patch prints the DDR status registers upon machine check
53383 interrupt on the 440EPx/GRx. This can be useful especially when
53384 ECC support is enabled.
53386 I added some small changes to the original patch from Niklaus to
53387 make it compile clean.
53389 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
53390 Signed-off-by: Stefan Roese <sr@denx.de>
53392 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
53393 Author: Niklaus Giger <niklaus.giger@nestal.com>
53394 Date: Mon Jun 25 16:50:55 2007 +0200
53396 ppc4xx: Fix O=buildir builds
53398 This patch fixes the problem to assemble cpu/ppc4xx/start.S
53399 experienced last week where building failed having specified
53400 O=../build.sequoia.
53402 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
53404 commit 466fff1a7bb5fe764a06450626f6098219f446b8
53405 Author: Stefan Roese <sr@denx.de>
53406 Date: Mon Jun 25 15:57:39 2007 +0200
53408 ppc4xx: Add pci_pre_init() for 405 boards
53410 This patch removes the CFG_PCI_PRE_INIT option completely, since
53411 it's not needed anymore with the patch from Matthias Fuchs with
53412 the "weak" pci_pre_init() implementation.
53414 Signed-off-by: Stefan Roese <sr@denx.de>
53416 commit 6f35c53166213c24a5a0e2390ed861136ff73870
53417 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
53418 Date: Sun Jun 24 17:41:21 2007 +0200
53420 ppc4xx: Maintenance patch for esd's CPCI405 derivats
53422 -add pci_pre_init() for pci interrupt fixup code
53423 -disable phy sleep mode via reset_phy() function
53424 -use correct io accessors
53427 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
53429 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
53430 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
53431 Date: Sun Jun 24 17:23:41 2007 +0200
53433 ppc4xx: Add pci_pre_init() for 405 boards
53435 This patch adds support for calling a plattform dependant
53436 pci_pre_init() function for 405 boards. This can be used to
53437 move the current pci_405gp_fixup_irq() function into the
53440 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
53441 A default function with 'weak' attribute is used when
53442 a board specific pci_pre_init() is not implemented.
53444 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
53446 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
53447 Author: Wolfgang Denk <wd@denx.de>
53448 Date: Fri Jun 22 23:59:00 2007 +0200
53450 Coding stylke cleanup; rebuild CHANGELOG
53452 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
53453 Author: Igor Lisitsin <igor@emcraft.com>
53454 Date: Wed Apr 18 14:55:19 2007 +0400
53456 Adapt log buffer code to support Linux 2.6
53458 A new environment variable, "logversion", selects the log buffer
53459 behaviour. If it is not set or set to a value other than 2, then the
53460 old, Linux 2.4.4, behaviour is selected.
53462 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
53465 commit a11e06965ec91270c51853407ff1261d3c740386
53466 Author: Igor Lisitsin <igor@emcraft.com>
53467 Date: Wed Mar 28 19:06:19 2007 +0400
53469 Extend POST support for PPC440
53471 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
53473 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
53476 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
53477 Author: Heiko Schocher <hs@pollux.denx.de>
53478 Date: Fri Jun 22 19:11:54 2007 +0200
53480 [PCS440EP] upgrade the PCS440EP board:
53481 - Show on the Status LEDs, some States of the board.
53482 - Get the MAC addresses from the EEProm
53484 - use the CF on the board.
53485 - check the U-Boot image in the Flash with a SHA1
53487 - use dynamic TLB entries generation for the SDRAM
53489 Signed-off-by: Heiko Schocher <hs@denx.de>
53491 commit 3a1f5c81b0b9557817a789bece839905581c2205
53492 Author: Stefan Roese <sr@denx.de>
53493 Date: Fri Jun 22 16:58:40 2007 +0200
53495 ppc4xx: Fix problem with extended program_tlb() funtion
53497 The recently extended program_tlb() function had a problem when
53498 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
53499 virtual address was not incremented. This patch fixes this issue
53500 and is tested on Katmai with 512MB SDRAM.
53502 Signed-off-by: Stefan Roese <sr@denx.de>
53504 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
53505 Author: Rafal Jaworowski <raj@semihalf.com>
53506 Date: Fri Jun 22 14:58:04 2007 +0200
53508 [ppc] Fix build breakage for all non-4xx PowerPC variants.
53510 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
53511 - minor 4xx cleanup
53513 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
53514 Author: Mike Frysinger <vapier@gentoo.org>
53515 Date: Fri Jun 22 10:34:12 2007 +0200
53517 [patch] add nand_init() prototype to nand.h
53519 since nand_init() is expected to be called by other parts of u-boot, there
53520 should be a prototype for it in nand.h
53522 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
53523 Signed-off-by: Stefan Roese <sr@denx.de>
53525 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
53526 Author: Wolfgang Denk <wd@denx.de>
53527 Date: Wed Jun 20 18:14:24 2007 +0200
53529 Coding style cleanup. Refresh CHANGELOG.
53531 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
53532 Author: Stefan Roese <sr@denx.de>
53533 Date: Tue Jun 19 17:22:44 2007 +0200
53535 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
53537 This patch adds a board command to configure the I2C bootstrap EEPROM
53538 values. Right now 533 and 667MHz are supported for booting either via NOR
53539 or NAND FLASH. Here the usage:
53541 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
53542 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
53544 Signed-off-by: Stefan Roese <sr@denx.de>
53546 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
53547 Author: Stefan Roese <sr@denx.de>
53548 Date: Tue Jun 19 16:42:31 2007 +0200
53550 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
53552 The latest changes showed a problem with the location of the NAND-SPL
53553 image in the OCM and the init-data area (incl. cache). This patch
53554 fixes this problem.
53556 Signed-off-by: Stefan Roese <sr@denx.de>
53558 commit 86ba99e34194394052d24c04dc40d1263d29a26f
53559 Author: Stefan Roese <sr@denx.de>
53560 Date: Tue Jun 19 16:40:58 2007 +0200
53562 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
53564 Signed-off-by: Stefan Roese <sr@denx.de>
53566 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
53567 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
53568 Date: Mon Jun 18 13:50:13 2007 -0500
53570 Added M5329AFEE and M5329BFEE Platforms
53572 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
53573 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
53574 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
53577 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
53578 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
53579 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
53580 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
53581 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
53582 lib_m68k/time.c, net/eth.c and rtc/Makefile
53584 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
53586 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
53587 Author: Michal Simek <monstr@monstr.eu>
53588 Date: Sun Jun 17 19:04:11 2007 +0200
53590 [fix] email reparation
53592 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
53593 Author: Michal Simek <monstr@monstr.eu>
53594 Date: Sun Jun 17 19:03:21 2007 +0200
53596 [FIX] fix microblaze file permitission
53598 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
53599 Author: Stefan Roese <sr@denx.de>
53600 Date: Fri Jun 15 11:33:41 2007 +0200
53602 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
53604 Now CONFIG_440 has to be defined in all PPC440 board config files.
53606 Signed-off-by: Stefan Roese <sr@denx.de>
53608 commit efa35cf12d914d4caba942acd5a6c45f217de302
53609 Author: Grzegorz Bernacki <gjb@semihalf.com>
53610 Date: Fri Jun 15 11:19:28 2007 +0200
53612 ppc4xx: Clean up 440 exceptions handling
53614 - Introduced dedicated switches for building 440 and 405 images required
53615 for 440-specific machine instructions like 'rfmci' etc.
53617 - Exception vectors moved to the proper location (_start moved away from
53618 the critical exception handler space, which it occupied)
53620 - CriticalInput now serviced (with default handler)
53622 - MachineCheck properly serviced (added a dedicated handler and return
53625 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
53626 unhandled and those not relevant for 4xx were eliminated)
53628 - Eliminated Linux leftovers, removed dead code
53630 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
53631 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
53632 Signed-off-by: Stefan Roese <sr@denx.de>
53634 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
53635 Author: Stefan Roese <sr@denx.de>
53636 Date: Fri Jun 15 08:18:01 2007 +0200
53638 [ppc4xx] Add initial lwmon5 board support
53640 This patch adds initial support for the Liebherr lwmon5 board euqipped
53641 with an AMCC 440EPx PowerPC.
53643 Signed-off-by: Stefan Roese <sr@denx.de>
53645 commit 85f737376d5ff3d5f0d45a8b657686326d175307
53646 Author: Stefan Roese <sr@denx.de>
53647 Date: Fri Jun 15 07:39:43 2007 +0200
53649 [ppc4xx] Extend 44x GPIO setup with default output state
53651 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
53652 is extended with the default GPIO output state (level).
53654 Signed-off-by: Stefan Roese <sr@denx.de>
53656 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
53657 Author: Stefan Roese <sr@denx.de>
53658 Date: Thu Jun 14 11:14:32 2007 +0200
53660 [ppc4xx] Extend program_tlb() with virtual & physical addresses
53662 Now program_tlb() allows to program a TLB (or multiple) with
53663 different virtual and physical addresses. With this change, now one
53664 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
53665 diabled and once with caches enabled.
53667 Signed-off-by: Stefan Roese <sr@denx.de>
53669 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
53670 Author: Detlev Zundel <dzu@denx.de>
53671 Date: Wed May 23 19:02:41 2007 +0200
53673 Change 'repeatable' attribute of some commands to sensible values.
53675 Most prominently this changes 'erase' to be non-repeatable.
53677 Signed-off-by: Detlev Zundel <dzu@denx.de>
53679 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
53680 Author: Detlev Zundel <dzu@denx.de>
53681 Date: Wed May 23 18:47:48 2007 +0200
53683 Fix 'run' not to continue after interrupted command
53685 Signed-off-by: Detlev Zundel <dzu@denx.de>
53687 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
53688 Author: Jason Jin <Jason.jin@freescale.com>
53689 Date: Mon Jun 11 15:14:24 2007 +0200
53691 USB: This patch fix readl in ohci swap reg access.
53693 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
53695 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
53696 Author: Bartlomiej Sieka <tur@semihalf.com>
53697 Date: Fri Jun 8 14:52:22 2007 +0200
53699 TQM5200: Add Flat Device Tree support, update default env. accordingly.
53701 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
53702 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53704 commit 9045f33c023f698660a2e45d1b2194c0711abebc
53705 Author: Wolfgang Denk <wd@denx.de>
53706 Date: Fri Jun 8 10:24:58 2007 +0200
53708 Fix config problems on SC3 board; make ide_reset_timeout work.
53710 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
53711 Author: Benoît Monin <bmonin@adeneo.eu>
53712 Date: Fri Jun 8 09:55:24 2007 +0200
53714 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
53716 Set the correct value in GPIOx_TCR when configuring the gpio
53717 with CFG_440_GPIO_TABLE.
53719 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
53720 Signed-off-by: Stefan Roese <sr@denx.de>
53722 commit f539edc076cfe52bff919dd512ba8d7af0e22092
53723 Author: Vadim Bendebury <vbendeb@google.com>
53724 Date: Thu May 24 15:52:25 2007 -0700
53726 cosmetic changes to bcm570x driver
53728 This is a cosmetic only changes submission.
53729 It affects files relevant to bcm570x driver.
53730 the commands used to generate this change was
53733 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
53735 The BMW target (the only one using this chip so far) builds cleanly, the
53736 `before and after' generated object files for drivers/bcm570x.c and
53737 drivers/tigon3.o are identical as reported by objdump -d
53739 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
53740 Signed-off-by: Ben Warren <bwarren@qstreams.com>
53742 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
53743 Author: Wolfgang Denk <wd@denx.de>
53744 Date: Wed Jun 6 16:26:56 2007 +0200
53746 Coding Style cleanup; generate new CHANGELOG file.
53748 Signed-off-by: Wolfgang Denk <wd@denx.de>
53750 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
53751 Author: Markus Klotzbuecher <mk@denx.de>
53752 Date: Wed Jun 6 11:49:44 2007 +0200
53754 TRAB, USB: update trab board configuration for use of generic ohci driver
53756 commit dace45acd1c1357daa9322099d07c9a9e08b0024
53757 Author: Markus Klotzbuecher <mk@denx.de>
53758 Date: Wed Jun 6 11:49:43 2007 +0200
53760 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
53762 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
53763 Author: Markus Klotzbuecher <mk@denx.de>
53764 Date: Wed Jun 6 11:49:43 2007 +0200
53766 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
53768 commit fc43be478f2aa37ce38acd85355038866e4162af
53769 Author: Markus Klotzbuecher <mk@denx.de>
53770 Date: Wed Jun 6 11:49:35 2007 +0200
53772 USB/OHCI: endianness cleanup in the generic ohci driver
53774 commit c440bfe6d6d92d66478a7e84402b31f48413617b
53775 Author: Stefan Roese <sr@denx.de>
53776 Date: Wed Jun 6 11:42:13 2007 +0200
53778 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
53780 This patch adds NAND booting support for the AMCC Acadia eval board.
53782 Please make sure to configure jumper J7 to position 2-3 when booting
53783 from NOR, and to position 1-2 when booting for NAND.
53785 I also added a board command to configure the I2C bootstrap EEPROM
53786 values. Right now only 267MHz is support for booting either via NOR
53787 or NAND FLASH. Here the usage:
53789 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
53790 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
53792 Signed-off-by: Stefan Roese <sr@denx.de>
53794 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
53795 Author: Rodolfo Giometti <giometti@linux.it>
53796 Date: Wed Jun 6 10:08:14 2007 +0200
53798 Files include/linux/byteorder/{big,little}_endian.h define
53799 __BIG_ENDIAN and __LITTLE_ENDIAN.
53801 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
53803 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
53804 Author: Zhang Wei <wei.zhang@freescale.com>
53805 Date: Wed Jun 6 10:08:14 2007 +0200
53807 Add USB PCI-OHCI, USB keyboard and event poll support to the
53808 MPC8641HPCN board config file.
53810 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
53812 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
53813 Author: Zhang Wei <wei.zhang@freescale.com>
53814 Date: Wed Jun 6 10:08:14 2007 +0200
53816 USB PCI-OHCI, interrupt pipe and usb event poll support
53818 This patch added USB PCI-OHCI chips support, interrupt pipe support
53819 and usb event poll support. For supporting the USB interrupt pipe, the
53820 globe urb_priv is moved to purb in ed struct. Now, we can process
53821 several urbs at one time. The interrupt pipe support codes are ported
53822 from Linux kernel 2.4.
53824 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
53826 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
53827 Author: Zhang Wei <wei.zhang@freescale.com>
53828 Date: Wed Jun 6 10:08:13 2007 +0200
53830 USB event poll support
53832 This patch adds USB event poll support, which could be used in usbkbd
53833 and other usb devices driver when the asynchronous interrupt
53834 processing is supported.
53836 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
53838 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
53839 Author: Rodolfo Giometti <giometti@linux.it>
53840 Date: Wed Jun 6 10:08:12 2007 +0200
53842 ISP116x: delay for crappy USB keys
53844 Using some (very) slow USB keys cause the USB host controller buffers
53845 are not ready to be read by the CPU so we need an extra delay before
53846 reading the USB storage data.
53848 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
53850 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
53851 Author: Markus Klotzbuecher <mk@denx.de>
53852 Date: Wed Jun 6 10:08:12 2007 +0200
53854 Change duplicate usb_cpu_init_fail to usb_board_init_fail
53856 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
53859 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
53861 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
53862 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
53863 Date: Tue Jun 5 12:30:52 2007 -0500
53865 mpc8641 image size cleanup
53867 e600 does not have a bootpg restriction.
53868 Move the version string to beginning of image at fff00000.
53869 Resetvec.S is not needed.
53870 Update flash copy instructions.
53871 Add tftpflash env variable
53873 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
53874 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53876 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
53877 Author: Benoît Monin <bmonin@adeneo.eu>
53878 Date: Mon Jun 4 08:36:05 2007 +0200
53880 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
53882 The attached patch is mainly cosmetic, allowing u-boot to
53883 display the correct bootstrap option letter according to the
53886 The original patch was extended with 405EZ support by Stefan
53889 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
53890 Signed-off-by: Stefan Roese <sr@denx.de>
53892 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
53893 Author: Nikita V. Youshchenko <yoush@debian.org>
53894 Date: Wed May 23 12:45:19 2007 +0400
53896 fix compilation problem for mpc8349itx CFG_RAMBOOT
53898 Current include/configs/MPC8349ITX.h does contain some support for building
53899 image that will be started from memory (without putting in into flash).
53900 It could be triggered by building with TEXT_BASE set to a low value.
53902 However, this support is incomplete: using of low TEXT_BASE causes
53903 defining configuration macros in inconsistent way, which later leads
53904 to compilation errors. In particular. flash support is being disabled,
53905 but then flash structures get referenced.
53907 This patch fixes this, making it possible to build with low TEXT_BASE.
53909 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
53911 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
53913 commit 8a364f0970de49949d635e60accf463c6443ef8c
53914 Author: Nikita V. Youshchenko <yoush@debian.org>
53915 Date: Wed May 23 12:45:25 2007 +0400
53917 add missing 'console' var to default mpc8349itx config
53919 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
53921 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
53922 Author: Stefan Roese <sr@denx.de>
53923 Date: Fri Jun 1 16:18:17 2007 +0200
53925 ppc4xx: Add missing file for Bamboo NAND booting support
53927 Signed-off-by: Stefan Roese <sr@denx.de>
53929 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
53930 Author: Stefan Roese <sr@denx.de>
53931 Date: Fri Jun 1 15:58:19 2007 +0200
53933 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
53935 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
53936 suggested by AMCC it is not recommended to dynamically change the EBC
53937 speed after bootup. So we undo this change to be on the safe side.
53939 Signed-off-by: Stefan Roese <sr@denx.de>
53941 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
53942 Author: Stefan Roese <sr@denx.de>
53943 Date: Fri Jun 1 15:29:04 2007 +0200
53945 ppc4xx: Update Sequoia NAND booting support with ECC
53947 Signed-off-by: Stefan Roese <sr@denx.de>
53949 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
53950 Author: Stefan Roese <sr@denx.de>
53951 Date: Fri Jun 1 15:27:11 2007 +0200
53953 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
53955 This patch adds NAND booting support for the AMCC Bamboo eval board.
53956 Since the NAND-SPL boot image is limited to 4kbytes, this version
53957 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
53958 supported, since the setup code for I2C DIMM autodetection and
53959 configuration is too big for this NAND bootloader.
53961 Signed-off-by: Stefan Roese <sr@denx.de>
53963 commit 42be56f53c8b107868e6125c8524ae84293e95a7
53964 Author: Stefan Roese <sr@denx.de>
53965 Date: Fri Jun 1 15:23:04 2007 +0200
53967 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
53969 The U-Boot NAND booting support is now extended to support ECC
53970 upon loading of the NAND U-Boot image.
53972 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
53974 Signed-off-by: Stefan Roese <sr@denx.de>
53976 commit a471db07fbb65a841ffc9f4f112562b945230f98
53977 Author: Stefan Roese <sr@denx.de>
53978 Date: Fri Jun 1 15:19:29 2007 +0200
53980 ppc4xx: Prepare Bamboo port for NAND booting support
53982 This patch updates the "normal" Bamboo NOR booting port, so
53983 that it is compatible with the coming soon NAND booting
53986 It also enables the 2nd NAND flash on the Bamboo.
53988 Signed-off-by: Stefan Roese <sr@denx.de>
53990 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
53991 Author: Stefan Roese <sr@denx.de>
53992 Date: Fri Jun 1 15:16:58 2007 +0200
53994 ppc4xx: Update in_be32() functions and friends to latest Linux version
53996 Signed-off-by: Stefan Roese <sr@denx.de>
53998 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
53999 Author: Stefan Roese <sr@denx.de>
54000 Date: Fri Jun 1 15:15:12 2007 +0200
54002 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
54004 This patch adds hardware ECC support to the NDFC driver. It also
54005 changes the register access from using the "simple" in32/out32
54006 functions to the in_be32/out_be32 functions, which make sure
54007 that the access is correctly synced. This is the only recommended
54008 access to SoC registers in the current Linux kernel.
54010 Signed-off-by: Stefan Roese <sr@denx.de>
54012 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
54013 Author: Stefan Roese <sr@denx.de>
54014 Date: Fri Jun 1 15:12:15 2007 +0200
54016 NAND: Update nand_ecc.c to latest Linux version
54018 This patch updates the nand_ecc code to the latest Linux version.
54019 The main reason for this is the more compact code. This makes
54020 it possible to include the ECC code into the NAND bootloader
54021 image (NAND_SPL) for PPC4xx.
54023 Signed-off-by: Stefan Roese <sr@denx.de>
54025 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
54026 Author: Stefan Roese <sr@denx.de>
54027 Date: Fri Jun 1 15:09:50 2007 +0200
54029 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
54031 Signed-off-by: Stefan Roese <sr@denx.de>
54033 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
54034 Author: Stefan Roese <sr@denx.de>
54035 Date: Fri Jun 1 13:45:24 2007 +0200
54037 ppc4xx: Change Luan config file to support ECC
54039 With the updated 44x DDR2 driver the Luan board now supports
54040 ECC generation and checking.
54042 Signed-off-by: Stefan Roese <sr@denx.de>
54044 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
54045 Author: Stefan Roese <sr@denx.de>
54046 Date: Fri Jun 1 13:45:00 2007 +0200
54048 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
54050 Add config option for 180 degree advance clock control as needed
54051 for the AMCC Luan eval board.
54053 Signed-off-by: Stefan Roese <sr@denx.de>
54055 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
54056 Author: Wolfgang Denk <wd@denx.de>
54057 Date: Thu May 31 17:20:09 2007 +0200
54059 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
54061 Signed-off-by: Wolfgang Denk <wd@denx.de>
54063 commit 7049288fb1f16f1b317140226cdebd07bd416395
54064 Author: Bartlomiej Sieka <tur@semihalf.com>
54065 Date: Sun May 27 17:26:46 2007 +0200
54067 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
54069 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
54071 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
54072 Author: Bartlomiej Sieka <tur@semihalf.com>
54073 Date: Sun May 27 17:06:36 2007 +0200
54075 Motion-PRO: Add support for redundant environment.
54077 Enable redundant environment, add a MTD partition for it; also add env.
54078 variable command for passing MTD partitions to the kernel command line.
54080 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
54081 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54083 commit a26eabeec31746f06d309103690892805696e344
54084 Author: Bartlomiej Sieka <tur@semihalf.com>
54085 Date: Sun May 27 17:05:11 2007 +0200
54087 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
54089 Allow passing longer command line to the kernel - useful especially
54090 for passing MTD partition layout.
54092 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
54093 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54095 commit 9160b96f71483a116de81c68985e8ee306d36764
54096 Author: Bartlomiej Sieka <tur@semihalf.com>
54097 Date: Sun May 27 17:04:18 2007 +0200
54099 Fix: Add missing NULL termination in strings expanded by macros parser.
54101 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
54102 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54104 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
54105 Author: Bartlomiej Sieka <tur@semihalf.com>
54106 Date: Sun May 27 17:03:37 2007 +0200
54108 Motion-PRO: Update EEPROM's page write bits and write delay.
54110 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
54111 have a page write capability of two bytes", and "This device offers fast (1ms)
54112 byte write". Add 3ms of extra delay.
54114 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
54115 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54117 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
54118 Author: Bartlomiej Sieka <tur@semihalf.com>
54119 Date: Sun May 27 16:58:45 2007 +0200
54121 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
54123 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
54124 networking does not function. This commit switches PHY to TX mode by clearing
54125 the FX_SEL bit of Mode Control Register. It also reverses commit
54126 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
54128 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
54129 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54131 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
54132 Author: Bartlomiej Sieka <tur@semihalf.com>
54133 Date: Sun May 27 16:57:15 2007 +0200
54135 Motion-PRO: Add support for the temperature sensor.
54137 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
54138 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54140 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
54141 Author: Bartlomiej Sieka <tur@semihalf.com>
54142 Date: Sun May 27 16:55:23 2007 +0200
54144 Motion-PRO: Add displaying of CPLD revision information during boot.
54146 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
54147 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54149 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
54150 Author: Bartlomiej Sieka <tur@semihalf.com>
54151 Date: Sun May 27 16:53:43 2007 +0200
54153 MPC5xxx: Change names of defines related to IPB and PCI clocks.
54155 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
54156 them does not cause PCI or IPB clocks to run at the specified speed.
54157 Instead, they configure divisors used to calculate said clocks. This
54158 patch renames the defines according to their real function.
54160 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
54161 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54163 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
54164 Author: Bartlomiej Sieka <tur@semihalf.com>
54165 Date: Sun May 27 16:51:48 2007 +0200
54167 Motion-PRO: Add LED support.
54169 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
54170 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
54171 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
54173 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
54174 Author: Ulf Samuelsson <ulf@atmel.com>
54175 Date: Thu May 24 12:12:47 2007 +0200
54177 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
54179 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
54180 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
54181 Signed-off-by: Stefan Roese <sr@denx.de>
54183 commit d756894722c888d09a9fa1df8323753772d3dcce
54184 Author: Stefan Roese <sr@denx.de>
54185 Date: Thu May 24 09:49:00 2007 +0200
54187 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
54189 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
54190 fixes a small bug in the 405EZ OCM initialization. Thanks for
54193 Signed-off-by: Stefan Roese <sr@denx.de>
54195 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
54196 Author: Stefan Roese <sr@denx.de>
54197 Date: Thu May 24 08:22:09 2007 +0200
54199 ppc4xx: Update AMCC Acadia support for board revision 1.1
54201 This patch updates the Acadia (405EZ) support for the new 1.1 board
54202 revision. It also adds support for NAND FLASH via the 4xx NDFC.
54204 Please note that the jumper J7 must be in position 2-3 for this
54205 NAND support. Position 1-2 is for NAND booting only. NAND booting
54206 support will follow later.
54208 Signed-off-by: Stefan Roese <sr@denx.de>
54210 commit 822d55365bb557e084d0e33625a6dedcc866110b
54211 Author: Jon Loeliger <jdl@freescale.com>
54212 Date: Wed May 23 14:09:46 2007 -0500
54214 Add LIST_86xx MAKEALL target for PowerPC builds.
54216 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54218 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
54219 Author: Stefan Roese <sr@denx.de>
54220 Date: Tue May 22 12:48:09 2007 +0200
54222 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
54224 Signed-off-by: Stefan Roese <sr@denx.de>
54226 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
54227 Author: Stefan Roese <sr@denx.de>
54228 Date: Tue May 22 12:46:10 2007 +0200
54230 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
54232 This patch adds support for 405 PPC's to the 4xx NAND driver
54233 ndfc.c. This is in preparation for the new AMCC 405EZ.
54235 Signed-off-by: Stefan Roese <sr@denx.de>
54237 commit 10603d76767426be803dadd4fb688b97eb69481c
54238 Author: Stefan Roese <sr@denx.de>
54239 Date: Mon May 21 07:41:22 2007 +0200
54241 ppc4xx: Fix problem in 405EZ OCM initialization
54243 As spotted by Bruce Adler this patch fixes an initialization problem
54246 Signed-off-by: Stefan Roese <sr@denx.de>
54248 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
54249 Author: Peter Pearse <peter.pearse@arm.com>
54250 Date: Fri May 18 16:47:03 2007 +0100
54252 Reduce line lengths to 80 characters max.
54254 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
54255 Author: Peter Pearse <peter.pearse@arm.com>
54256 Date: Fri May 18 14:34:07 2007 +0100
54258 Makefile permissions
54260 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
54261 Author: Peter Pearse <peter.pearse@arm.com>
54262 Date: Fri May 18 14:33:11 2007 +0100
54264 Makefile permissions
54266 commit 255a3577c848706441daee0174543efe205a77f8
54267 Author: Kim Phillips <kim.phillips@freescale.com>
54268 Date: Wed May 16 16:52:19 2007 -0500
54270 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
54272 For all practical u-boot purposes, TSECs don't differ throughout the
54273 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
54275 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54277 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
54278 Author: Stefano Babic <sbabic@denx.de>
54279 Date: Wed May 16 14:49:12 2007 +0200
54281 Fix compile problem cause my Microblaze merge
54283 Signed-off-by: Stefano Babic <sbabic@denx.de>
54285 commit ada4697d0230d6da552867777f98a67ec3ba2579
54286 Author: Jeffrey Mann <mannj@embeddedplanet.com>
54287 Date: Wed May 16 13:23:10 2007 +0200
54289 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
54291 Because the Sequoia board does not boot with an EBC faster than 66MHz,
54292 the clock divider are changed after the initial boot process.
54294 This allows for maximum clocking speeds to be achieved on newer boards.
54295 Sequoia boards with 666.66 MHz processors require that the EBC divider
54296 be set to 3 in order to start the initial boot process at a slower EBC
54297 speed. After the initial boot process, the divider can be set back to 2,
54298 which will cause the boards to run at 83.333MHz. This is backward
54299 compatible with boards with 533.33 MHz processors, as these boards will
54300 already be set with an EBC divider of 2.
54302 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
54304 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
54305 Author: Wolfgang Denk <wd@denx.de>
54306 Date: Wed May 16 01:16:53 2007 +0200
54308 Minor Coding Style cleanup, update CHANGELOG.
54310 Signed-off-by: Wolfgang Denk <wd@denx.de>
54312 commit d62f64cc23a940eafe712c776b3249e4160753d1
54313 Author: Wolfgang Denk <wd@denx.de>
54314 Date: Wed May 16 00:13:33 2007 +0200
54316 Coding Style Cleanup, new CHANGELOG
54318 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
54319 Author: Wolfgang Denk <wd@denx.de>
54320 Date: Tue May 15 23:38:05 2007 +0200
54322 Minor coding style cleanup.
54324 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
54325 Author: mushtaq khan <mushtaq_k@procsys.com>
54326 Date: Fri Apr 20 14:23:02 2007 +0530
54328 Add driver for S-ATA-controller on Intel processors with South
54329 Bridge, ICH-5, ICH-6 and ICH-7.
54333 1. Code is divided in to two files. All functions, which are
54334 controller specific are kept in "drivers/ata_piix.c" file and
54335 functions, which are not controller specific, are kept in
54336 "common/cmd_sata.c" file.
54338 2. Reading and Writing from the S-ATA drive is done using PIO method.
54340 3. Driver can be configured for 48-bit addressing by defining macro
54341 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
54344 4. S-ATA read function is hooked to the File system, commands like
54345 ext2ls and ext2load file can be used. This has been tested.
54347 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
54348 controller and identifies the S-ATA drives connected to it.
54350 6. U-Boot command "sata" is added, which is used to read/write, print
54351 partition table and get info about the drives present. This I have
54352 implemented in same way as "ide" command is implemented in U-Boot.
54354 7. This driver is for S-ATA in native mode.
54356 8. This driver does not support the Native command queuing and
54359 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
54361 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
54362 Author: mushtaq khan <mushtaq_k@procsys.com>
54363 Date: Mon Apr 30 15:57:22 2007 +0530
54365 Fixes bug clearing the bss section for i386
54368 There is a bug in the code of clearing the bss section for processor
54369 i386.(File: cpu/i386/start.S)
54370 In the code, bss_start addr (starting addr of bss section) is put into
54371 the register %eax, but the code which clears the bss section refers to
54372 the addr pointed by %edi.
54374 This patch fixes this bug by putting bss_start into %edi register.
54376 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
54378 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
54379 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
54380 Date: Mon Apr 30 16:47:28 2007 -0500
54382 Add support for BCM5464 Quad Phy
54384 Added support for Broadcom's BCM5464 Quad Phy
54386 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
54388 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
54389 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
54390 Date: Wed May 9 08:10:57 2007 +0800
54392 Search the exception table with linear algorithm
54394 Search the exception table with linear algorithm instead of
54395 bisecting algorithm.
54396 Because the exception table might be unsorted.
54398 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
54400 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
54401 Author: Aubrey.Li <aubrey.adi@gmail.com>
54402 Date: Mon May 14 11:47:35 2007 +0800
54404 Fix compilation issues on MACOSX
54406 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
54407 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
54409 commit 56fd7162985c412317bbf763a225fba23c64fd31
54410 Author: Stephen Williams <steve@icarus.com>
54411 Date: Tue May 15 07:55:42 2007 -0700
54413 Fix for compile of JSE target
54415 The attached patch fixes the compile of the JSE board in the
54416 denx git as of 14 may 2007. It is an extremely simple patch,
54417 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
54419 Fix to compile JSE against 20070514 git of u-boot
54421 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
54422 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
54423 Date: Sun May 13 21:01:03 2007 +0900
54425 sh: MS7750SE support.
54427 This adds support for the Hitachi MS7750SE.
54429 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
54431 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
54432 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
54433 Date: Sun May 13 20:58:00 2007 +0900
54435 sh: First support code of SuperH.
54437 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
54439 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
54440 Author: Stefan Roese <sr@denx.de>
54441 Date: Fri May 11 12:01:49 2007 +0200
54443 ppc4xx: Add mtcpr/mfcpr access macros
54445 Signed-off-by: Stefan Roese <sr@denx.de>
54447 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
54448 Author: Stefan Roese <sr@denx.de>
54449 Date: Fri May 11 12:01:06 2007 +0200
54451 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
54453 Signed-off-by: Stefan Roese <sr@denx.de>
54455 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
54456 Author: Piotr Kruszynski <ppk@semihalf.com>
54457 Date: Thu May 10 16:55:52 2007 +0200
54459 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
54462 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
54463 Author: Peter Pearse <peter.pearse@arm.com>
54464 Date: Wed May 9 11:42:44 2007 +0100
54466 Add the board directory for SMN42
54468 commit 160131bf965785419626df6c388729fe0b597992
54469 Author: Peter Pearse <peter.pearse@arm.com>
54470 Date: Wed May 9 11:41:58 2007 +0100
54472 Add the files for the SMN42 board
54474 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
54475 Author: Peter Pearse <peter.pearse@arm.com>
54476 Date: Wed May 9 11:40:34 2007 +0100
54478 Remove the deleted files for the SMN42 patch
54480 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
54481 Author: Peter Pearse <peter.pearse@arm.com>
54482 Date: Wed May 9 11:37:56 2007 +0100
54484 New board SMN42 branch
54486 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
54487 Author: Peter Pearse <peter.pearse@arm.com>
54488 Date: Wed May 9 10:24:38 2007 +0100
54490 Makefile permissions
54492 commit b84289b595731e8851df46e893845cc1322c9b9b
54493 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
54494 Date: Tue May 8 14:17:07 2007 -0500
54496 8641hpcn: Fix Makefile after moving pixis to board/freescale.
54498 The OBJTREE != SRCTREE build scenario was broken.
54501 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54502 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54504 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
54505 Author: Michal Simek <monstr@monstr.eu>
54506 Date: Tue May 8 15:57:43 2007 +0200
54508 add: reading special purpose registers
54510 commit 1a50f164beb065f360fbddb76029607d6b099698
54511 Author: Michal Simek <monstr@monstr.eu>
54512 Date: Tue May 8 14:52:52 2007 +0200
54514 add: Microblaze V5 exception handling
54516 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
54517 Author: Michal Simek <monstr@monstr.eu>
54518 Date: Tue May 8 14:39:11 2007 +0200
54520 add: FSL control read and write
54522 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
54523 Author: Piotr Kruszynski <ppk@semihalf.com>
54524 Date: Tue May 8 13:05:44 2007 +0200
54526 [Motion-PRO] Add support for I2C, EEPROM and RTC.
54528 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
54529 Author: Bartlomiej Sieka <tur@semihalf.com>
54530 Date: Tue May 8 10:23:56 2007 +0200
54532 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
54535 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
54536 Author: Bartlomiej Sieka <tur@semihalf.com>
54537 Date: Tue May 8 09:39:12 2007 +0200
54539 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
54540 eliminates networking problems in Linux (timeouts).
54542 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
54543 Author: Bartlomiej Sieka <tur@semihalf.com>
54544 Date: Tue May 8 09:21:57 2007 +0200
54546 [Motion-PRO] Enable Flat Device Tree support and modify default environment
54547 to allow booting of FDT-expecting kernels.
54549 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
54550 Author: Michal Simek <monstr@monstr.eu>
54551 Date: Mon May 7 23:58:31 2007 +0200
54553 new: USE_MSR_INTR support
54555 commit 008861a2f3ef2c062744d733787c7e530a1b8761
54556 Author: Bartlomiej Sieka <tur@semihalf.com>
54557 Date: Mon May 7 22:36:15 2007 +0200
54559 [MPC5xxx] There are networking problems on the Motion-PRO board with
54560 current PHY initalization code (tftp timeouts all the time). This commit
54561 temporarily disables PHY initalization sequence to make the networking
54562 operational, until a fix is found.
54564 commit abca901869c3760b6c5fecb825db6c1d91a78a93
54565 Author: Wolfgang Denk <wd@denx.de>
54566 Date: Mon May 7 22:10:36 2007 +0200
54568 Get rid of duplicated file (see include/configs/sbc8560.h instead)
54570 Signed-off-by: Wolfgang Denk <wd@denx.de>
54572 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
54573 Author: Wolfgang Denk <wd@denx.de>
54574 Date: Mon May 7 22:07:08 2007 +0200
54576 Get rid of duplicated file (see doc/README.SBC8560 instead)
54578 Signed-off-by: Wolfgang Denk <wd@denx.de>
54580 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
54581 Author: Michal Simek <monstr@monstr.eu>
54582 Date: Mon May 7 19:43:10 2007 +0200
54584 fix: read and write MSR - repair number of parameters
54586 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
54587 Author: Jeffrey Mann <mannj@embeddedplanet.com>
54588 Date: Mon May 7 19:42:49 2007 +0200
54590 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
54592 A '3' got cut off in the formatting of the last patch to automatically
54593 change the clock speed of the system clock on sequoia board.
54595 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
54596 Signed-off-by: Stefan Roese <sr@denx.de>
54598 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
54599 Author: Michal Simek <monstr@monstr.eu>
54600 Date: Mon May 7 19:33:51 2007 +0200
54602 new: fsl interrupt support
54603 FSL_Has_data is connected to INTC.
54605 commit 792032baa7d625e34c981ab6df521911bd8dc861
54606 Author: Michal Simek <monstr@monstr.eu>
54607 Date: Mon May 7 19:30:12 2007 +0200
54609 fix: interrupt handler
54612 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
54613 Author: Michal Simek <monstr@monstr.eu>
54614 Date: Mon May 7 19:25:08 2007 +0200
54616 fix: remove asm code
54618 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
54619 Author: Michal Simek <monstr@monstr.eu>
54620 Date: Mon May 7 19:12:43 2007 +0200
54622 fix: clean interrupt
54624 commit 42efed6130c8fcf7da881385b5427065d2801757
54625 Author: Michal Simek <monstr@monstr.eu>
54626 Date: Mon May 7 17:22:25 2007 +0200
54628 fix: interrupt handler for multiple sources
54630 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
54631 Author: Michal Simek <monstr@monstr.eu>
54632 Date: Mon May 7 17:11:09 2007 +0200
54634 new: add writing to msr register
54636 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
54637 Author: Markus Klotzbuecher <mk@denx.de>
54638 Date: Mon May 7 16:43:56 2007 +0200
54640 Fix an ancient CHANGELOG conflict
54642 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
54643 Author: Timur Tabi <timur@freescale.com>
54644 Date: Sat May 5 08:12:30 2007 +0200
54646 5xxx: write MAC address to mac-address and local-mac-address
54648 Some device trees have a mac-address property, some have local-mac-address,
54649 and some have both. To support all of these device trees, ftp_cpu_setup()
54650 should write the MAC address to mac-address and local-mac-address, if they
54653 Signed-off-by: Timur Tabi <timur@freescale.com>
54654 Acked-by: Grant Likely <grant.likely@secretlab.ca>
54656 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
54657 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
54658 Date: Sun Apr 29 14:01:54 2007 +0200
54660 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
54662 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
54663 message. Use PVR to distinguish between the two variants, and print proper CPU
54666 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
54667 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
54668 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
54670 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
54671 Author: Ladislav Michl <ladis@linux-mips.org>
54672 Date: Wed Apr 25 16:01:26 2007 +0200
54674 [PATCH] simplify silent console
54676 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
54677 Acked-by: Stefan Roese <sr@denx.de>
54679 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
54680 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
54681 Date: Mon Apr 23 15:30:39 2007 +0200
54683 [PATCH] Avoid assigning PCI resources from zero address
54685 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
54686 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
54687 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
54688 sentence about "0" being considered an invalid address) -- so, use a reasonable
54689 starting value of 0x1000 (that's what the most Linux archs are using).
54691 Alternatively, one might have fixed the calls to pci_set_region() individually
54692 (some code even seems to have taken care of this issue) but that would have
54693 been a lot more work. :-)
54695 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
54696 Acked-by: Stefan Roese <sr@denx.de>
54698 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
54699 Author: Jeffrey Mann <mannj@embeddedplanet.com>
54700 Date: Mon Apr 23 14:00:11 2007 +0200
54702 [patch] setenv(...) can delete environmentalvariables
54704 update setenv() function so that entering a NULL value for the
54705 variable's value will delete the environmental variable
54707 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
54708 Acked-by: Stefan Roese <sr@denx.de>
54710 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
54711 Author: Mike Frysinger <vapier@gentoo.org>
54712 Date: Mon Apr 23 13:54:24 2007 +0200
54714 [patch] use unsigned char in smc91111 driver for mac
54716 the v_mac variable in the smc91111 driver is declared as a signed char ...
54717 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
54718 because when it gets printed out, you get a display like:
54719 0xFFFFFFE0 and that's no good
54721 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
54723 commit ffc50f9bb194343c6303517a517708457a5eb6b8
54724 Author: Michal Simek <monstr@monstr.eu>
54725 Date: Sat May 5 18:54:42 2007 +0200
54727 new: FSL and MSR support #2
54729 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
54730 Author: Michal Simek <monstr@monstr.eu>
54731 Date: Sat May 5 18:27:16 2007 +0200
54733 new: FSL and MSR support
54735 commit 2f15278c2eb911c668b4fe562130b78cf554d139
54736 Author: Wolfgang Denk <wd@denx.de>
54737 Date: Sat May 5 18:23:11 2007 +0200
54739 Coding stylke cleanup; update CHANGELOG.
54741 Signed-off-by: Wolfgang Denk <wd@denx.de>
54743 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
54744 Author: Wolfgang Denk <wd@denx.de>
54745 Date: Sat May 5 18:05:02 2007 +0200
54747 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
54749 Signed-off-by: Wolfgang Denk <wd@denx.de>
54751 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
54752 Author: Wolfgang Denk <wd@denx.de>
54753 Date: Sat May 5 17:15:50 2007 +0200
54755 Make "file" command happy with some config.mk files; update CHANGELOG
54757 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
54758 Author: Jeffrey Mann <mannj@embeddedplanet.com>
54759 Date: Sat May 5 08:32:14 2007 +0200
54761 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
54763 The AMCC Secquoia board has been changed in a new revision from using a
54764 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
54765 indicates the difference. This patch reads that bit and uses the correct
54766 clock speed for the board. This code is backward compatable will all
54767 prior boards. All prior boards will be read as 33.000.
54769 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
54770 Signed-off-by: Stefan Roese <sr@denx.de>
54772 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
54773 Author: Stefan Roese <sr@denx.de>
54774 Date: Sat May 5 08:29:01 2007 +0200
54776 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
54778 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
54779 for the 4k NAND boot image so define bus_frequency to 133MHz here
54780 which is save for the refresh counter setup.
54782 Signed-off-by: Stefan Roese <sr@denx.de>
54784 commit 2f550ab976405300f5b07bf2890800840d0aa05f
54785 Author: Timur Tabi <timur@freescale.com>
54786 Date: Sat May 5 08:12:30 2007 +0200
54788 5xxx: write MAC address to mac-address and local-mac-address
54790 Some device trees have a mac-address property, some have local-mac-address,
54791 and some have both. To support all of these device trees, ftp_cpu_setup()
54792 should write the MAC address to mac-address and local-mac-address, if they
54795 Signed-off-by: Timur Tabi <timur@freescale.com>
54796 Acked-by: Grant Likely <grant.likely@secretlab.ca>
54798 commit a79886590593ba1d667c840caa4940c61639f18f
54799 Author: Thomas Knobloch <knobloch@siemens.com>
54800 Date: Sat May 5 07:04:42 2007 +0200
54802 NAND: Wrong calculation of page number in nand_block_bad()
54804 In case that there is no memory based bad block table available the
54805 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
54806 nand_block_bad() directly. When parameter 'getchip' is set to zero,
54807 nand_block_bad() will not right shift the offset to calculate the
54808 correct page number.
54810 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
54811 Signed-off-by: Stefan Roese <sr@denx.de>
54813 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
54814 Author: Wolfgang Denk <wd@denx.de>
54815 Date: Fri May 4 10:02:33 2007 +0200
54817 Fix initrd length corruption in bootm command.
54819 When using FDT Images, the length of an inital ramdisk was
54820 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
54822 Patches by Timur Tabi & Johns Daniel.
54824 Signed-off-by: Wolfgang Denk <wd@denx.de>
54826 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
54827 Author: Kim Phillips <kim.phillips@freescale.com>
54828 Date: Thu May 3 19:43:52 2007 -0500
54830 mpc83xx: fix trivial error in MAKEALL
54832 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54834 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
54835 Author: Wolfgang Denk <wd@denx.de>
54836 Date: Thu May 3 16:34:41 2007 +0200
54838 Update board configuration for STX GP3SSA board:
54840 Enable hush shell, environment in flash rather in EEPROM,
54841 more user-friendly default environment, etc.
54842 The simple EEPROM environment can be selected easily in the board
54845 Signed-off-by: Wolfgang Denk <wd@denx.de>
54847 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
54848 Author: Wolfgang Denk <wd@denx.de>
54849 Date: Tue Apr 24 14:37:49 2007 +0200
54851 Cleanup STX GP3SSA code; fix build and compile problems.
54853 commit 35171dc04e028ecacc23ad916a66295472555dbf
54854 Author: Dan Malek <dan@embeddedalley.com>
54855 Date: Fri Jan 5 09:15:34 2007 +0100
54857 Add support for STX GP3SSA (stxssa) Board
54859 Signed-off-by Dan Malek, <dan@embeddedalley.com>
54861 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
54862 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54863 Date: Wed May 2 13:31:53 2007 +0200
54865 macb: Don't restart autonegotiation if we already have link
54867 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
54868 link is already up.
54870 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54872 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
54873 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54874 Date: Wed May 2 13:22:38 2007 +0200
54876 macb: Introduce a few barriers when dealing with DMA descriptors
54878 There were a few theoretical possibilities that the compiler might
54879 optimize away DMA descriptor reads and/or writes and thus cause
54880 synchronization problems with the hardware. Insert barriers where
54881 we depend on reads/writes actually hitting memory.
54883 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54885 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
54886 Author: Andy Fleming <afleming@freescale.com>
54887 Date: Sat Feb 24 01:08:13 2007 -0600
54889 Cleaned up some 85xx PCI bugs
54891 * Cleaned up the CDS PCI Config Tables and added NULL entries to
54893 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
54894 * Fixed 85xx PCI code to assign powar region sizes based on the
54895 config values (rather than hard-coding them)
54896 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
54898 Signed-off-by: Andy Fleming <afleming@freescale.com>
54900 commit 6743105988fc44d5b0d30388c790607835aae7a6
54901 Author: Andy Fleming <afleming@freescale.com>
54902 Date: Mon Apr 23 02:54:25 2007 -0500
54904 Add support for the 8568 MDS board
54906 This included some changes to common files:
54907 * Add 8568 processor SVR to various places
54908 * Add support for setting the qe bus-frequency value in the dts
54909 * Add the 8568MDS target to the Makefile
54911 Signed-off-by: Andy Fleming <afleming@freescale.com>
54913 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
54914 Author: David Updegraff <dave@cray.com>
54915 Date: Fri Apr 20 14:34:48 2007 -0500
54917 Add support for treating unknown PHYs as generic PHYs.
54919 When bringing up u-boot on new boards, PHY support sometimes gets
54920 neglected. Most PHYs don't really need any special support,
54921 though. By adding a generic entry that always matches if nothing
54922 else does, we can provide support for "unsupported" PHYs for the
54925 The generic PHY driver supports most PHYs, including gigabit.
54927 Signed-off-by: David Updegraff <dave@cray.com>
54928 Signed-off-by: Andy Fleming <afleming@freescale.com>
54930 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
54931 Author: James Yang <James.Yang@freescale.com>
54932 Date: Wed Feb 7 15:28:04 2007 -0600
54934 Conditionalize 8641 Rev1.0 MCM workarounds
54936 Signed-off-by: James Yang <James.Yang@freescale.com>
54937 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54939 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
54940 Author: Timur Tabi <timur@freescale.com>
54941 Date: Mon Apr 30 13:59:50 2007 -0500
54943 Fix memory initialization on MPC8349E-mITX
54945 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
54946 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
54947 on some ITX boards, notably those with a revision 3.1 CPU.
54949 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
54950 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
54952 Signed-off-by: Timur Tabi <timur@freescale.com>
54953 Acked-by: Michael Benedict <MBenedict@twacs.com>
54954 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54956 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
54957 Author: Kim Phillips <kim.phillips@freescale.com>
54958 Date: Mon Apr 30 15:26:21 2007 -0500
54960 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
54962 and fix CPU: to align with Board: display text.
54964 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54966 commit c1ab82669d9525998c34e802a12cad662723f22a
54967 Author: James Yang <James.Yang@freescale.com>
54968 Date: Fri Mar 16 13:02:53 2007 -0500
54970 Rewrote picos_to_clk() to avoid rounding errors.
54971 Clarified that conversion is to DRAM clocks rather than platform clocks.
54972 Made function static to spd_sdram.c.
54974 Signed-off-by: James Yang <James.Yang@freescale.com>
54975 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54977 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
54978 Author: Stefan Roese <sr@denx.de>
54979 Date: Sun Apr 29 14:13:01 2007 +0200
54981 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
54983 Signed-off-by: Stefan Roese <sr@denx.de>
54985 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
54986 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
54987 Date: Sun Apr 29 14:01:54 2007 +0200
54989 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
54991 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
54992 message. Use PVR to distinguish between the two variants, and print proper CPU
54995 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
54996 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
54997 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
54999 commit 5c5d3242935cf3543af01142627494434834cf98
55000 Author: Kim Phillips <kim.phillips@freescale.com>
55001 Date: Wed Apr 25 12:34:38 2007 -0500
55003 mpc83xx: minor fixups for 8313rdb introduction
55005 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
55006 Author: Ladislav Michl <ladis@linux-mips.org>
55007 Date: Wed Apr 25 16:01:26 2007 +0200
55009 [PATCH] simplify silent console
55011 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
55012 Acked-by: Stefan Roese <sr@denx.de>
55014 commit 144876a380f5756f57412caf74c1d6dc201dd796
55015 Author: Michal Simek <monstr@monstr.eu>
55016 Date: Tue Apr 24 23:01:02 2007 +0200
55018 [PATCH] MTD partition support, JFFS2 support
55020 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
55021 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55022 Date: Tue Apr 24 14:03:45 2007 +0200
55024 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
55026 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55028 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
55029 Author: Andy Fleming <afleming@freescale.com>
55030 Date: Mon Apr 23 02:37:47 2007 -0500
55032 Reworked 85xx speed detection code
55034 Changed the code to read the registers and calculate the clock
55035 rates, rather than using a "switch" statement.
55037 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
55039 Signed-off-by: Andy Fleming <afleming@freescale.com>
55041 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
55042 Author: Andy Fleming <afleming@freescale.com>
55043 Date: Mon Apr 23 02:24:28 2007 -0500
55045 Enable 8544 support
55047 * Add support to the Makefile
55048 * Add 8544 configuration support to the tsec driver
55049 * Add 8544 SVR numbers to processor.h
55051 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55052 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55054 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
55055 Author: Andy Fleming <afleming@freescale.com>
55056 Date: Fri Feb 23 17:12:25 2007 -0600
55058 Support 1G size on 8548
55060 e500v2 and newer cores support 1G page sizes.
55062 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55063 Signed-off-by: Andy Fleming <afleming@freescale.com>
55065 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
55066 Author: Andy Fleming <afleming@freescale.com>
55067 Date: Fri Feb 23 17:11:16 2007 -0600
55069 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
55071 The other pagesz constants use one letter to specify order of
55072 magnitude. Also change the one reference to it in mpc8548cds/init.S
55074 Signed-off-by: Andy Fleming <afleming@freescale.com>
55076 commit 1f9a318cea14272edd10d63739e2d326c90f430e
55077 Author: Andy Fleming <afleming@freescale.com>
55078 Date: Fri Feb 23 16:28:46 2007 -0600
55080 Only set ddrioovcr for 8548 rev1.
55082 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55083 Signed-off-by: Andy Fleming <afleming@freescale.com>
55085 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
55086 Author: Andy Fleming <afleming@freescale.com>
55087 Date: Sat Feb 24 01:16:45 2007 -0600
55089 Tweak DDR ECC error counter
55091 Enable single-bit error counter when memory was cleared by ddr controller.
55093 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55094 Signed-off-by: Andy Fleming <afleming@freescale.com>
55096 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
55097 Author: Timur Tabi <timur@freescale.com>
55098 Date: Mon Feb 12 13:34:55 2007 -0600
55100 85xx: write MAC address to mac-address and local-mac-address
55102 Some device trees have a mac-address property, some have local-mac-address,
55103 and some have both. To support all of these device trees, ftp_cpu_setup()
55104 should write the MAC address to mac-address and local-mac-address, if they
55107 Signed-off-by: Timur Tabi <timur@freescale.com>
55109 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
55110 Author: Andy Fleming <afleming@freescale.com>
55111 Date: Mon Apr 23 01:44:44 2007 -0500
55113 Some 85xx cpu cleanups
55115 * Cleaned up the TSR[WIS] clearing
55116 * Cleaned up DMA initialization
55118 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55119 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55120 Acked-by: Andy Fleming <afleming@freescale.com>
55122 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
55123 Author: Andy Fleming <afleming@freescale.com>
55124 Date: Mon Apr 23 01:32:22 2007 -0500
55126 Add cpu support for the 8544
55128 Recognize new SVR values, and add a few register definitions
55130 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55131 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55132 Acked-by: Andy Fleming <afleming@freescale.com>
55134 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
55135 Author: Jon Loeliger <jdl@freescale.com>
55136 Date: Wed Apr 11 16:51:02 2007 -0500
55138 Add MPC8544DS basic port board files.
55140 Add board port under new board/freescale directory
55141 structure and reuse existing PIXIS FPGA support there.
55143 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55144 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55146 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
55147 Author: Jon Loeliger <jdl@freescale.com>
55148 Date: Wed Apr 11 16:50:57 2007 -0500
55150 Add MPC8544DS main configuration file.
55152 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55153 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55155 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
55156 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
55157 Date: Wed Dec 27 22:07:15 2006 +0300
55159 Fix PCI I/O space mapping on Freescale MPC85x0ADS
55161 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
55162 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
55163 describing the local address window used for the PCI I/O space accesses -- fix
55164 this and carry over the necessary changes into the MPC8560ADS code since the
55165 PCI I/O space mapping was also broken for this board (by the earlier commit
55166 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
55167 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
55169 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
55171 board/mpc8540ads/init.S | 4 ++--
55172 board/mpc8560ads/init.S | 4 ++--
55173 include/configs/MPC8540ADS.h | 5 ++---
55174 include/configs/MPC8541CDS.h | 2 +-
55175 include/configs/MPC8548CDS.h | 2 +-
55176 include/configs/MPC8560ADS.h | 8 ++++----
55177 6 files changed, 12 insertions(+), 13 deletions(-)
55179 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
55180 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
55181 Date: Tue Dec 5 16:42:30 2006 +0800
55183 u-boot: Fix e500 v2 core reset bug
55185 The following patch fixes the e500 v2 core reset bug.
55186 For e500 v2 core, a new reset control register is added to reset the
55189 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
55191 commit 63247a5acd58032e6cf33f525bc3923b467bac88
55192 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
55193 Date: Wed Dec 20 11:01:00 2006 +0800
55195 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
55197 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
55198 entry number to control the loop. This can reduce the potential risk
55199 for the 85xx processor increasing its TLB adn LAW entry number.
55201 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
55202 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
55204 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
55205 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
55206 Date: Mon Dec 18 17:01:04 2006 +0800
55208 u-boot: Fix the 85xxcds tsec bug
55210 Fix the 85xxcds tsec bug.
55211 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
55213 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
55215 commit 7337b237ffc4aaf1b9467024fe472a880d852598
55216 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
55217 Date: Fri Dec 15 14:43:31 2006 +0800
55219 u-boot: Fix CPU2 errata on MPC8548CDS board
55221 This patch apply workaround of CPU2 errata on MPC8548CDS board.
55223 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
55225 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
55226 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
55227 Date: Mon Dec 18 16:25:15 2006 +0800
55229 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
55231 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
55233 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
55235 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
55236 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
55237 Date: Thu Dec 14 14:14:55 2006 +0800
55239 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
55241 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
55243 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
55245 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
55246 Author: Scott Wood <scottwood@freescale.com>
55247 Date: Mon Apr 16 14:54:15 2007 -0500
55249 mpc83xx: Add MPC8313ERDB support.
55251 Signed-off-by: Scott Wood <scottwood@freescale.com>
55253 commit 49ea3b6eafe606285ae4d5c378026153dde53200
55254 Author: Scott Wood <scottwood@freescale.com>
55255 Date: Mon Apr 16 14:34:21 2007 -0500
55257 mpc83xx: Add generic PCI setup code.
55259 Board code can now request the generic setup code rather than having to
55260 copy-and-paste it for themselves. Boards should be converted to use this
55261 once they're tested with it.
55263 Signed-off-by: Scott Wood <scottwood@freescale.com>
55265 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
55266 Author: Scott Wood <scottwood@freescale.com>
55267 Date: Mon Apr 16 14:34:19 2007 -0500
55269 mpc83xx: Add 831x support to speed.c.
55271 Signed-off-by: Scott Wood <scottwood@freescale.com>
55273 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
55274 Author: Scott Wood <scottwood@freescale.com>
55275 Date: Mon Apr 16 14:34:18 2007 -0500
55277 mpc83xx: Add 831x support to global_data.h
55279 Signed-off-by: Scott Wood <scottwood@freescale.com>
55281 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
55282 Author: Scott Wood <scottwood@freescale.com>
55283 Date: Mon Apr 16 14:34:16 2007 -0500
55285 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
55287 Rather than misleadingly define PVR_83xx as the specific type of 83xx
55288 being built for, the PVR of each core revision is defined. checkcpu() now
55289 prints the core that it detects, rather than aborting if it doesn't find
55290 what it thinks it wants.
55292 Signed-off-by: Scott Wood <scottwood@freescale.com>
55294 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
55295 Author: Scott Wood <scottwood@freescale.com>
55296 Date: Mon Apr 16 14:34:15 2007 -0500
55298 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
55300 Signed-off-by: Scott Wood <scottwood@freescale.com>
55302 commit d87c57b201b4572d16f1b642998faa00c9912b16
55303 Author: Scott Wood <scottwood@freescale.com>
55304 Date: Mon Apr 16 14:31:55 2007 -0500
55306 mpc83xx: Add register definitions for MPC831x.
55308 Signed-off-by: Scott Wood <scottwood@freescale.com>
55310 commit 7fc4c71a143be8666d70803fb25ae60379c95622
55311 Author: Stefan Roese <sr@denx.de>
55312 Date: Mon Apr 23 15:39:59 2007 +0200
55316 Signed-off-by: Stefan Roese <sr@denx.de>
55318 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
55319 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
55320 Date: Mon Apr 23 15:30:39 2007 +0200
55322 [PATCH] Avoid assigning PCI resources from zero address
55324 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
55325 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
55326 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
55327 sentence about "0" being considered an invalid address) -- so, use a reasonable
55328 starting value of 0x1000 (that's what the most Linux archs are using).
55330 Alternatively, one might have fixed the calls to pci_set_region() individually
55331 (some code even seems to have taken care of this issue) but that would have
55332 been a lot more work. :-)
55334 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
55335 Acked-by: Stefan Roese <sr@denx.de>
55337 commit afb903a2eb9436baa9270ccc0c27082d86497d89
55338 Author: Jeffrey Mann <mannj@embeddedplanet.com>
55339 Date: Mon Apr 23 14:00:11 2007 +0200
55341 [patch] setenv(...) can delete environmentalvariables
55343 update setenv() function so that entering a NULL value for the
55344 variable's value will delete the environmental variable
55346 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
55347 Acked-by: Stefan Roese <sr@denx.de>
55349 commit 36f104e5caa747d568eff26b369565af57c2ffa6
55350 Author: Mike Frysinger <vapier@gentoo.org>
55351 Date: Mon Apr 23 13:54:24 2007 +0200
55353 [patch] use unsigned char in smc91111 driver for mac
55355 the v_mac variable in the smc91111 driver is declared as a signed char ...
55356 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
55357 because when it gets printed out, you get a display like:
55358 0xFFFFFFE0 and that's no good
55360 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
55362 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
55363 Author: Rodolfo Giometti <giometti@enneenne.com>
55364 Date: Mon Apr 23 13:10:52 2007 +0200
55366 USB: (Another) delay for crappy USB keys.
55368 Some USB keys are slow in giving back an answer when the Root HUB
55369 enables power lines.
55371 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
55373 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
55374 Author: Stefan Roese <sr@denx.de>
55375 Date: Mon Apr 23 12:00:22 2007 +0200
55377 Remove BOARDLIBS usage completely
55379 Signed-off-by: Stefan Roese <sr@denx.de>
55381 commit 32556443840f127170e4baa8bdd5b567039f6c36
55382 Author: Michal Simek <monstr@monstr.eu>
55383 Date: Sat Apr 21 21:07:22 2007 +0200
55385 [PATCH] SystemACE support for Microblaze
55387 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
55388 Author: Michal Simek <monstr@monstr.eu>
55389 Date: Sat Apr 21 21:02:40 2007 +0200
55391 16bit read/write little endian
55393 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
55394 Author: Michal Simek <monstr@monstr.eu>
55395 Date: Sat Apr 21 20:53:31 2007 +0200
55397 Change ML401 parameters - Xilinx BSP
55399 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
55400 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
55401 Date: Wed Feb 28 05:37:29 2007 -0600
55403 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
55405 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55407 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
55408 Author: Zhang Wei <wei.zhang@freescale.com>
55409 Date: Fri Jan 19 10:42:37 2007 +0800
55411 Enable LAWs for MPC8641 PCI-Ex2.
55413 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
55414 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55416 commit bd7851ce1e1f140665b520026abf1042968b1102
55417 Author: Jon Loeliger <jdl@freescale.com>
55418 Date: Fri Apr 20 14:12:26 2007 -0500
55420 mpc86xx; Write MAC address to mac-address and local-mac-address
55422 Some device trees have a mac-address property, some have local-mac-address,
55423 and some have both. To support all of these device trees, ftp_cpu_setup()
55424 should write the MAC address to mac-address and local-mac-address, if they
55427 Signed-off-by: Timur Tabi <timur@freescale.com>
55428 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55430 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
55431 Author: Jon Loeliger <jdl@freescale.com>
55432 Date: Fri Apr 20 14:11:38 2007 -0500
55434 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
55436 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
55437 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55439 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
55440 Author: Wolfgang Denk <wd@denx.de>
55441 Date: Fri Apr 20 17:43:28 2007 +0200
55443 Cleanup compiler warnings, update CHANGELOG
55445 Signed-off-by: Wolfgang Denk <wd@denx.de>
55447 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
55448 Author: Detlev Zundel <dzu@denx.de>
55449 Date: Fri Apr 20 12:01:47 2007 +0200
55451 Fix breakage of NC650 board with respect to nand support.
55453 Signed-off-by: Detlev Zundel <dzu@denx.de>
55455 commit 39f23cd90947639ac278a18ff277ec786b5ac167
55456 Author: Domen Puncer <domen.puncer@telargo.com>
55457 Date: Fri Apr 20 11:13:16 2007 +0200
55459 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
55461 G2 core reference manual says decrementer and time base
55462 are decreasing/increasing once every 4 bus clock cycles.
55463 Lets fix it, so time in Linux won't run twice as fast
55465 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
55466 Acked-by: Grant Likely <grant.likely@secretlab.ca>
55468 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
55469 Author: Gerald Van Baren <vanbaren@cideas.com>
55470 Date: Thu Apr 19 23:14:39 2007 -0400
55472 Fix serious pointer bug with bootm and reserve map.
55474 What was suppose to be a stack variable was declared as a pointer,
55475 overwriting random memory.
55476 Also moved the libfdt.a requirement into the main Makefile. That is
55479 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
55480 Author: Stefan Roese <sr@denx.de>
55481 Date: Thu Apr 19 09:53:52 2007 +0200
55483 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
55485 Previous versions used full wait states for the chip select #1 which
55486 is connected to the Xilinix SystemACE controller on the AMCC Katmai
55487 evaluation board. This leads to really slow access and therefore low
55488 performance. This patch now sets up the chip select a lot faster
55489 resulting in much better read/write performance of the Linux driver.
55491 Signed-off-by: Stefan Roese <sr@denx.de>
55493 commit 37837828d89084879bee2f2b8c7c68d4695940df
55494 Author: Wolfgang Denk <wd@denx.de>
55495 Date: Wed Apr 18 17:49:29 2007 +0200
55497 Clenaup, update CHANGELOG
55499 Signed-off-by: Wolfgang Denk <wd@denx.de>
55501 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
55502 Author: Wolfgang Denk <wd@denx.de>
55503 Date: Wed Apr 18 17:20:58 2007 +0200
55507 Signed-off-by: Wolfgang Denk <wd@denx.de>
55509 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
55510 Author: Wolfgang Denk <wd@denx.de>
55511 Date: Wed Apr 18 17:07:26 2007 +0200
55513 Cleanup, update CHANGELOG
55515 Sigend-off-by: Wolfgang Denk <wd@denx.de>
55517 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
55518 Author: Wolfgang Denk <wd@denx.de>
55519 Date: Wed Apr 18 16:17:46 2007 +0200
55523 commit ad4eb555671d97f96dc56eab55103b1f86874b01
55524 Author: Wolfgang Denk <wd@denx.de>
55525 Date: Wed Apr 18 14:30:39 2007 +0200
55527 MCC200 board: remove warning which is obsolete after PSoC firmware changes
55529 Signed-off-by: Wolfgang Denk <wd@denx.de>
55531 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
55532 Author: Domen Puncer <domen.puncer@telargo.com>
55533 Date: Wed Apr 18 12:11:05 2007 +0200
55535 [PATCH] icecube/lite5200b: document wakeup from low-power support
55537 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
55539 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
55540 Author: Stefan Roese <sr@denx.de>
55541 Date: Wed Apr 18 12:07:47 2007 +0200
55543 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
55545 Signed-off-by: Stefan Roese <sr@denx.de>
55547 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
55548 Author: Stefan Roese <sr@denx.de>
55549 Date: Wed Apr 18 12:05:59 2007 +0200
55551 ppc4xx: Add output for bootrom location to 405EZ ports
55553 Now 405EZ ports also show upon bootup from which boot device
55554 they are configured to boot:
55556 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
55558 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
55559 Bootstrap Option E - Boot ROM Location EBC (32 bits)
55560 16 kB I-Cache 16 kB D-Cache
55561 Board: Acadia - AMCC PPC405EZ Evaluation Board
55563 Signed-off-by: Stefan Roese <sr@denx.de>
55565 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
55566 Author: Peter Pearse <peter.pearse@arm.com>
55567 Date: Tue Apr 17 13:30:33 2007 +0100
55569 Move ppearse to ARM board list
55570 Add Konstantin Kletschke for scb9328.
55571 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
55573 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
55574 Author: Domen Puncer <domen.puncer@telargo.com>
55575 Date: Mon Apr 16 14:00:13 2007 +0200
55577 [PATCH] icecube/lite5200b: wakeup from low-power support
55579 U-Boot part of Lite5200b low power mode support.
55580 Puts SDRAM out of self-refresh and transfers control to
55581 address saved at physical 0x0.
55583 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
55584 Acked-by: Grant Likely <grant.likely@secretlab.ca>
55586 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
55587 Author: Gerald Van Baren <vanbaren@cideas.com>
55588 Date: Sun Apr 15 13:54:26 2007 -0400
55590 Fix the ft_cpu_setup() property settings.
55592 Use "setter" functions instead of flags, cleaner and more flexible.
55593 It also fixes the problem noted by Timur Tabi that the ethernet MAC
55594 addresses were all being set incorrectly to the same MAC address.
55596 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
55597 Author: Gerald Van Baren <vanbaren@cideas.com>
55598 Date: Sat Apr 14 22:51:24 2007 -0400
55600 Improve the bootm command for CONFIG_OF_LIBFDT
55602 In bootm, create the "/chosen" node only if it doesn't already exist
55603 (better matches the previous behavior).
55604 Update for proper reserved memory map handling for initrd.
55606 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
55607 Author: Gerald Van Baren <vanbaren@cideas.com>
55608 Date: Sat Apr 14 22:46:41 2007 -0400
55610 Add some utilities to manipulate the reserved memory map.
55612 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
55613 Author: Wolfgang Denk <wd@denx.de>
55614 Date: Sat Apr 14 21:16:54 2007 +0200
55618 commit 8e6875183cdca91c134408d119d4abcd48ef6856
55619 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55620 Date: Sun Dec 17 18:56:46 2006 +0100
55622 AVR32: Enable MMC support
55624 Set up the portmux for the MMC interface and enable the MMC driver
55625 along with support for DOS partitions, ext2 and FAT filesystems.
55627 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55629 commit fc26c97bb6df41b4a95662c34054fe912387bf38
55630 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55631 Date: Fri Jan 20 10:03:53 2006 +0100
55635 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
55637 The AT91 ARM-based CPUs use basically the same hardware, so it should
55638 be possible to share this driver, but no effort has been made so far.
55640 Hardware documentation can be found in the AT32AP7000 data sheet,
55641 which can be downloaded from
55643 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
55645 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55647 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
55648 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55649 Date: Sun Dec 17 18:55:37 2006 +0100
55651 AVR32: Add clk and gpio infrastructure for mmci
55653 Implement functions for configuring the mmci pins, as well as
55654 functions for getting the clock rate of the mmci controller.
55656 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55658 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
55659 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55660 Date: Sun Dec 17 18:53:56 2006 +0100
55662 Enable partition support with MMC
55664 Include implementations of init_part() and get_partition_info() when
55667 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55669 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
55670 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55671 Date: Sun Dec 17 17:14:30 2006 +0100
55673 AVR32: Enable networking
55675 Implement MACB initialization for AVR32 and ATSTK1000, and turn
55676 everything on, including the MACB driver.
55678 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55680 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
55681 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55682 Date: Fri Jan 20 10:03:34 2006 +0100
55684 Atmel MACB ethernet driver
55686 Driver for the Atmel MACB on-chip ethernet controller.
55688 This driver has been tested on the ATSTK1000 board with a AT32AP7000
55689 CPU. It should probably work on AT91SAM926x as well with some minor
55692 Hardware documentation can be found in the AT32AP7000 data sheet,
55693 which can be downloaded from
55695 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
55697 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55699 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
55700 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55701 Date: Sun Dec 17 16:56:14 2006 +0100
55703 AVR32: Add clk and gpio infrastructure for macb0 and macb1
55705 Implement functions for configuring the macb0 and macb1 pins, as
55706 well as functions for getting the clock rate of the various
55707 busses the macb ethernet controllers are connected to.
55709 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55711 commit d5acb95b16a0a74c643524342c3437e765426d05
55712 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55713 Date: Sun Dec 17 15:39:15 2006 +0100
55715 AVR32: Implement simple DMA memory allocator
55717 Implement dma_alloc_coherent() which returns cache-aligned
55718 uncacheable memory.
55720 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55722 commit 91975b0fea773c9e681fea8cf3349669f27685ee
55723 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55724 Date: Sun Dec 17 15:46:02 2006 +0100
55726 Import <linux/mii.h> from the Linux kernel
55728 Instead of creating yet another set of MII register definitions
55729 in the macb driver, here's a complete set of definitions for everyone
55732 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55734 commit 1b804b229556a4d862da93c0ec94e79419364b2c
55735 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55736 Date: Wed Mar 21 19:47:36 2007 +0100
55738 AVR32: Include more commands for ATSTK1000
55740 Include the imi, imls and jffs commands sets by default on ATSTK1000.
55741 Also define CONFIG_BOOTARGS to something more useful, define
55742 CONFIG_BOOTCOMMAND and enable autoboot by default.
55744 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55746 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
55747 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55748 Date: Wed Mar 21 19:44:48 2007 +0100
55750 AVR32: Provide a definition of struct stat
55752 Copy the definition of struct stat from the Linux kernel.
55754 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55756 commit 12f099c08167a7a51aeee623bc16dafd0841271c
55757 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55758 Date: Sun Dec 17 14:46:06 2006 +0100
55760 AVR32: Use initdram() instead of board_init_memories()
55762 Conform to the "standard" interface and use initdram() instead of
55763 board_init_memories() on AVR32. This enables us to get rid of the
55764 sdram_size member of the global_data struct as well.
55766 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55768 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
55769 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55770 Date: Mon Nov 20 15:53:10 2006 +0100
55772 AVR32: Relocate u-boot to SDRAM
55774 Relocate the u-boot image into SDRAM like everyone else does. This
55775 means that we can handle much larger .data and .bss than we used to.
55777 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55779 commit df548d3c3e2bbc40258713167859ffc2ce99a900
55780 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55781 Date: Sun Nov 19 18:06:53 2006 +0100
55783 AVR32: Resource management rewrite
55785 Rewrite the resource management code (i.e. I/O memory, clock gating,
55786 gpio) so it doesn't depend on any global state. This is necessary
55787 because this code is heavily used before relocation to RAM, so we
55788 can't write to any global variables.
55790 As an added bonus, this makes u-boot's memory footprint a bit smaller,
55791 although some functionality has been left out; all clocks are enabled
55792 all the time, and there's no checking for gpio line conflicts.
55794 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55796 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
55797 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55798 Date: Sat Nov 18 18:01:13 2006 +0100
55800 AVR32: Clean up memory-map.h for at32ap7000
55802 Convert spaces to tabs (must have missed this one last time around),
55803 sort the entries by address and group them together by bus
55806 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55808 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
55809 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55810 Date: Sat Nov 18 17:32:31 2006 +0100
55812 AVR32: Build position-independent u-boot
55814 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
55815 position independent. This will make relocation a lot easier.
55817 -mno-init-got means that gcc shouldn't emit code to load the GOT
55818 address into r6 in every function prologue. We do it once and for
55819 all in the early startup assembly code, so enabling this option
55820 makes u-boot a bit faster and smaller.
55822 The assembly parts have always been position-independent, so no code
55823 changes should be necessary.
55825 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55827 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
55828 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55829 Date: Sat Nov 18 17:24:31 2006 +0100
55831 AVR32: Use avr32-linux- cross-compilation prefix by default
55833 It doesn't really matter which toolchain you use to compile u-boot,
55834 but the avr32-linux one is probably what most people have installed.
55836 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55838 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
55839 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55840 Date: Sat Nov 18 17:15:30 2006 +0100
55842 AVR32: Split start_u_boot into board_init_f and board_init_r
55844 Split the avr32 initialization code into a function to run before
55845 relocation, board_init_f and a function to run after relocation,
55846 board_init_r. For now, board_init_f simply calls board_init_r
55849 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55851 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
55852 Author: Heiko Schocher <hs@pollux.denx.de>
55853 Date: Sat Apr 14 05:26:48 2007 +0200
55855 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
55856 clear the Display after reset.
55858 Signed-off-by: Heiko Schocher <hs@denx.de>
55860 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
55861 Author: Denis Peter <d.peter@mpl.ch>
55862 Date: Fri Apr 13 09:13:33 2007 +0200
55864 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
55866 Fix bug introduced by "Fix get_partition_info() parameter error in all
55867 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
55868 to use diskboot or scsiboot form another device than 0.
55870 Signed-off-by: Denis Peter <d.peter@mpl.ch>
55872 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
55873 Author: Greg Lopp <lopp@pobox.com>
55874 Date: Fri Apr 13 08:02:24 2007 +0200
55876 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
55878 Signed-of-by: Greg Lopp <lopp@pobox.com>
55879 Acked-by: Grant Likely <grant.likely@secretlab.ca>
55881 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
55882 Author: Xie Xiaobo <r63061@freescale.com>
55883 Date: Fri Mar 9 19:08:25 2007 +0800
55885 Fix two bugs for MPC83xx DDR2 controller SPD Init
55887 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
55888 the first bug is that the picos_to_clk routine introduces a huge
55889 rounding error in 83xx.
55890 the second bug is that the mode register write recovery field is
55891 tWR-1, not tWR >> 1.
55893 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
55894 Author: Jeffrey Mann <mannj@embeddedplanet.com>
55895 Date: Thu Apr 12 14:15:59 2007 +0200
55897 ppc4xx: Fix i2c divisor calcularion for PPC4xx
55899 This patch fixes changes the i2c_init(...) function to use the function
55900 get_OPB_freq() rather than calculating the OPB speed by
55901 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
55902 specific per processor. The prior method was not and so was calculating
55903 the wrong speed for some PPC4xx processors.
55905 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
55906 Signed-off-by: Stefan Roese <sr@denx.de>
55908 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
55909 Author: Wolfgang Denk <wd@denx.de>
55910 Date: Wed Apr 11 17:25:01 2007 +0200
55914 Signed-off-by: Wolfgang Denk <wd@denx.de>
55916 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
55917 Author: Wolfgang Denk <wd@denx.de>
55918 Date: Wed Apr 11 17:22:55 2007 +0200
55920 Update for SC3 board
55922 * Make IDE timeout configurable through ide_reset_timeout variable.
55923 * Use Newline as "password" string
55924 * Use just a single partition in NAND flash
55926 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
55927 Author: Haiying Wang <haiying.wang@freescale.com>
55928 Date: Mon Jan 22 12:37:30 2007 -0600
55930 Add PIXIS FPGA support for MPC8641HPCN board.
55932 Move the 8641HPCN's PIXIS code to the new directory
55933 board/freescale/common/ as it will be shared by
55934 future boards not in the same processor family.
55936 Write a "pixis_reset" command that utilizes the FPGA
55937 reset sequencer to support alternate soft-reset options
55938 such as using the "alternate" flash bank, enabling
55939 the watch dog, or choosing different CPU frequencies.
55941 Add documentation for the pixis_reset to README.mpc8641hpcn.
55943 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
55944 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55946 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
55947 Author: Gerald Van Baren <vanbaren@cideas.com>
55948 Date: Fri Apr 6 14:19:43 2007 -0400
55950 Moved fdt command support code to fdt_support.c
55952 ...in preparation for improving the bootm command's handling of fdt blobs.
55953 Also cleaned up some coding sloppiness.
55955 commit 6679f9299534e488a171a9bb8f9bb891de247aab
55956 Author: Gerald Van Baren <vanbaren@cideas.com>
55957 Date: Fri Apr 6 14:17:14 2007 -0400
55959 libfdt: Make fdt_check_header() public
55961 Changed _fdt_check_header() to fdt_check_header() and made it part of
55962 the interface - it is a useful routine.
55964 Also did some asthetics cleanup to the include files (headers).
55966 commit c0707ce65677650b5ceab0500ee50ae5168afef2
55967 Author: Aubrey Li <aubrey.adi@gmail.com>
55968 Date: Thu Apr 5 18:34:06 2007 +0800
55970 [Blackfin][PATCH] Kill off a bunch of common local prototypes
55972 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
55973 Author: Aubrey Li <aubrey.adi@gmail.com>
55974 Date: Thu Apr 5 18:33:04 2007 +0800
55976 [Blackfin][PATCH] Fix dynamic CPLB generation issue
55978 commit 0445e3a264251d75b1be45ef713c70726a2952f0
55979 Author: Aubrey Li <aubrey.adi@gmail.com>
55980 Date: Thu Apr 5 18:31:47 2007 +0800
55982 [Blackfin][PATCH] minior cleanup
55984 commit 155fd766573981090e638b493d5857562151862e
55985 Author: Aubrey Li <aubrey.adi@gmail.com>
55986 Date: Thu Apr 5 18:31:18 2007 +0800
55988 [Blackfin][PATCH] Fix copyright and update license
55990 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
55991 Author: Aubrey Li <aubrey.adi@gmail.com>
55992 Date: Thu Apr 5 18:30:25 2007 +0800
55994 [Blackfin][PATCH] Add BF537 EMAC driver initialization
55996 commit 889256e8604e0c68db1d866d720894dffede9df6
55997 Author: Aubrey Li <aubrey.adi@gmail.com>
55998 Date: Thu Apr 5 18:29:55 2007 +0800
56000 [Blackfin][PATCH] call real the system synchronize instruction
56002 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
56003 Author: Aubrey Li <aubrey.adi@gmail.com>
56004 Date: Thu Apr 5 18:29:17 2007 +0800
56006 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
56008 commit dfeeab2cd680df047e68e723b246adf6f33bb556
56009 Author: Aubrey Li <aubrey.adi@gmail.com>
56010 Date: Thu Apr 5 18:28:34 2007 +0800
56012 [Blackfin][PATCH]: fix flash unaligned copy issue
56014 commit 443feb740584e406efa203af909fe2926608e8d5
56015 Author: Igor Marnat <marny@rambler.ru>
56016 Date: Wed Mar 21 09:55:01 2007 +0300
56018 Update usage of 'nc' in README.NetConsole
56020 Added information about usage of NetConsole on systems where the -l and -p
56021 switches are mutually exclusive.
56023 Signed-off-by: Igor Marnat <marny@rambler.ru>
56024 Signed-off-by: Ben Warren <bwarren@qstreams.com>
56026 commit 31c98a88228021b314c89ebb8104fb6473da4471
56027 Author: Wolfgang Denk <wd@denx.de>
56028 Date: Wed Apr 4 02:09:30 2007 +0200
56030 Minor coding style cleanup.
56032 commit 94abd7c0583ebe01e799b25f451201deeaab550d
56033 Author: Wolfgang Denk <wd@denx.de>
56034 Date: Wed Apr 4 01:49:15 2007 +0200
56038 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
56039 Author: Rodolfo Giometti <giometti@enneenne.com>
56040 Date: Tue Apr 3 14:27:18 2007 +0200
56042 Support for the Philips ISP116x HCD (Host Controller Driver)
56044 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
56046 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
56047 Author: Markus Klotzbuecher <mk@denx.de>
56048 Date: Tue Apr 3 14:27:08 2007 +0200
56050 USB: cleanup monahans usb support. Remove dead code.
56052 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
56054 commit a65c5768e5537530bd1780af3d3fddc3113a163c
56055 Author: Stefan Roese <sr@denx.de>
56056 Date: Mon Apr 2 10:09:30 2007 +0200
56058 ppc4xx: Change SysACE address on Katmai
56060 With this new base address of the Xilinx SystemACE controller
56061 the Linux driver will be easier to adapt, since it can now be
56062 mapped via the "normal" ioremap() call.
56064 Signed-off-by: Stefan Roese <sr@denx.de>
56066 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
56067 Author: Gerald Van Baren <vanbaren@cideas.com>
56068 Date: Sat Mar 31 14:30:53 2007 -0400
56070 Fix some minor whitespace violations.
56072 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
56073 Author: Gerald Van Baren <vanbaren@cideas.com>
56074 Date: Sat Mar 31 12:23:51 2007 -0400
56076 Add a flattened device tree (fdt) command (2 of 2)
56078 Modifications to the existing code to support the new fdt command.
56080 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
56081 Author: Gerald Van Baren <vanbaren@cideas.com>
56082 Date: Sat Mar 31 12:22:10 2007 -0400
56084 Add a flattened device tree (fdt) command (1 of 2)
56086 The fdt command uses David Gibson's libfdt library to manipulate as well
56087 as print the flattened device tree. This patch is the new command,
56088 the second part is the modifications to the existing code.
56090 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
56091 Author: Gerald Van Baren <vanbaren@cideas.com>
56092 Date: Sat Mar 31 12:13:43 2007 -0400
56094 libfdt: Enhanced and published fdt_next_tag()
56096 Enhanced the formerly private function _fdt_next_tag() to allow stepping
56097 through the tree, used to produce a human-readable dump, and made
56098 it part of the published interface.
56099 Also added some comments.
56101 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
56102 Author: Gerald Van Baren <vanbaren@cideas.com>
56103 Date: Sat Mar 31 12:05:39 2007 -0400
56105 libfdt: Customizations for use by u-boot.
56107 Changes to David Gibson's original source to fit into u-boot's
56108 environment. No functionality changes.
56110 commit 35748177c64a4a83a00057e93bb33e40278a2a96
56111 Author: Gerald Van Baren <vanbaren@cideas.com>
56112 Date: Sat Mar 31 12:00:56 2007 -0400
56114 libfdt: Import libfdt source (2 of 2)
56116 This adds the applicable libfdt source files (unmodified) and a README
56117 to explain where the source came from.
56119 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
56120 Author: Gerald Van Baren <vanbaren@cideas.com>
56121 Date: Sat Mar 31 11:59:59 2007 -0400
56123 libfdt: Import libfdt source (1 of 2)
56125 This adds the applicable libfdt source files (unmodified) and a README
56126 to explain where the source came from.
56128 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
56129 Author: Stefan Roese <sr@denx.de>
56130 Date: Sat Mar 31 13:16:23 2007 +0200
56132 ppc4xx: Update Katmai bootstrap command
56134 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
56137 Signed-off-by: Stefan Roese <sr@denx.de>
56139 commit cabee756a6532986729477c3cc1ea16ef8517ad2
56140 Author: Stefan Roese <sr@denx.de>
56141 Date: Sat Mar 31 13:15:06 2007 +0200
56143 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
56145 Additional RAM information is now printed upon powerup, like
56146 DDR2 frequency and CAS latency.
56148 Signed-off-by: Stefan Roese <sr@denx.de>
56150 commit 60723803431ac75cad085690789e433d5ab9174e
56151 Author: Stefan Roese <sr@denx.de>
56152 Date: Sat Mar 31 08:48:36 2007 +0200
56154 ppc4xx: Change Yucca config file to support ECC
56156 With the updated 44x DDR2 driver the Yucca board now supports
56157 ECC generation and checking.
56159 Signed-off-by: Stefan Roese <sr@denx.de>
56161 commit 490e5730c674b20d708b783a2c5ffd7208f83873
56162 Author: Stefan Roese <sr@denx.de>
56163 Date: Sat Mar 31 08:47:34 2007 +0200
56165 ppc4xx: Fix "bootstrap" command for Katmai board
56167 The board specific "bootstrap" command is now fixed and can
56168 be used for the AMCC Katmai board to configure different
56169 CPU/PLB/OPB frequencies.
56171 Signed-off-by: Stefan Roese <sr@denx.de>
56173 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
56174 Author: Stefan Roese <sr@denx.de>
56175 Date: Sat Mar 31 08:46:08 2007 +0200
56177 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
56179 Fix a bug in the auto calibration routine. This driver now runs
56180 more reliable with the tested modules. It's also tested with
56181 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
56183 Signed-off-by: Stefan Roese <sr@denx.de>
56185 commit 342cd097be1e7affe82f42ab3da220959a699e64
56186 Author: Michal Simek <monstr@monstr.eu>
56187 Date: Fri Mar 30 22:52:09 2007 +0200
56189 [PATCH] Clean include dependence
56191 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
56192 Author: Michal Simek <monstr@monstr.eu>
56193 Date: Fri Mar 30 22:42:45 2007 +0200
56195 [CLEAN] Remove inefficient Suzaku code
56197 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
56198 Author: Stefan Roese <sr@denx.de>
56199 Date: Wed Mar 28 15:03:16 2007 +0200
56201 Merge some AMCC make targets to keep the top-level Makefile smaller
56203 Signed-off-by: Stefan Roese <sr@denx.de>
56205 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
56206 Author: Stefan Roese <sr@denx.de>
56207 Date: Wed Mar 28 14:52:12 2007 +0200
56209 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
56211 The "old" i2c commands (iprobe, imd...) are now compiled in again,
56212 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
56215 Signed-off-by: Stefan Roese <sr@denx.de>
56217 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
56218 Author: Michal Simek <monstr@monstr.eu>
56219 Date: Tue Mar 27 00:32:16 2007 +0200
56221 PATCH: Resolve GPL license problem
56223 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
56224 Author: Rodolfo Giometti <giometti@enneenne.com>
56225 Date: Mon Mar 26 12:03:36 2007 +0200
56227 PXA: pxa27x USB OHCI support
56229 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
56231 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
56232 Author: Markus Klotzbuecher <mk@denx.de>
56233 Date: Mon Mar 26 11:21:05 2007 +0200
56235 USB: remove the S3C24X0_merge #define, which was introduced while
56236 merging OHCI drivers.
56238 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
56240 commit 1798049522f594013aea29457d46794298c6ae15
56241 Author: Michal Simek <root@monstr.eu>
56242 Date: Mon Mar 26 01:39:07 2007 +0200
56244 Support for XUPV2P board
56246 BSP autoconfig support
56248 commit 0d974d5297349504a2ddfa09314be573b5df320a
56249 Author: Stefan Roese <sr@denx.de>
56250 Date: Sat Mar 24 15:57:09 2007 +0100
56252 [PATCH] Add 4xx GPIO functions
56254 This patch adds some 4xx GPIO functions. It also moves some of the
56255 common code and defines into a common 4xx GPIO header file.
56257 Signed-off-by: Stefan Roese <sr@denx.de>
56259 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
56260 Author: Stefan Roese <sr@denx.de>
56261 Date: Sat Mar 24 15:55:58 2007 +0100
56263 [PATCH] Small Sequoia cleanup
56265 Signed-off-by: Stefan Roese <sr@denx.de>
56267 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
56268 Author: Stefan Roese <sr@denx.de>
56269 Date: Sat Mar 24 15:45:34 2007 +0100
56271 [PATCH] Clean up 40EZ/Acadia support
56273 This patch cleans up all the open issue of the preliminary
56276 Signed-off-by: Stefan Roese <sr@denx.de>
56278 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
56279 Author: Jon Loeliger <jdl@freescale.com>
56280 Date: Tue Dec 12 11:02:20 2006 -0600
56282 Fix 8641HPCN problem with ld version 2.16
56284 (Dot outside sections problem).
56286 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
56288 Signed-off-by: Jon Loeliger <jdl@freescale.com>
56290 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
56291 Author: Haiying Wang <haiying.wang@freescale.com>
56292 Date: Thu Dec 7 10:35:55 2006 -0600
56294 Set Rev 2.x 86xx PIC in mixed mode.
56296 Prevent false interrupt from hanging Linux as MSR[EE] is set
56297 to enable interrupts by changing the PIC out of the default
56298 pass through mode into mixed mode.
56300 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
56301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
56303 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
56304 Author: Jason Jin <jason.jin@freescale.com>
56305 Date: Thu Dec 7 10:32:35 2006 -0600
56307 Add flash cmd function to 8641HPCN ramboot
56309 Also fixes some commmand for 8641 HPCN ramboot case.
56311 Signed-off-by: Jason Jin <jason.jin@freescale.com>
56312 Signed-off-by: Jon Loeliger <jdl@freescale.com>
56314 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
56315 Author: Ed Swarthout <ed.swarthout@freescale.com>
56316 Date: Thu Dec 7 10:34:14 2006 -0600
56318 Add support for 8641 Rev 2 silicon.
56320 Without this patch, I am unable to get to the prompt on rev 2 silicon.
56321 Only set ddrioovcr for rev1.
56323 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
56324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
56326 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
56327 Author: Wolfgang Denk <wd@denx.de>
56328 Date: Thu Mar 22 00:13:12 2007 +0100
56330 Code cleanup / re-insert previous Copyright entries.
56332 Signed-off-by: Wolfgang Denk <wd@denx.de>
56334 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
56335 Author: Wolfgang Denk <wd@denx.de>
56336 Date: Wed Mar 21 23:26:15 2007 +0100
56338 Code cleanup. Update CHANGELOG
56340 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
56341 Author: Stefan Roese <sr@denx.de>
56342 Date: Wed Mar 21 14:54:29 2007 +0100
56344 ppc4xx: Fix file mode of include/configs/acadia.h
56346 Signed-off-by: Stefan Roese <sr@denx.de>
56348 commit d5f4614c9350d9333e575100fb250aab774d0258
56349 Author: Markus Klotzbuecher <mk@denx.de>
56350 Date: Wed Mar 21 14:41:46 2007 +0100
56352 SPC1920: fix small clock routing bug
56354 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
56356 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
56357 Author: Stefan Roese <sr@denx.de>
56358 Date: Wed Mar 21 13:39:57 2007 +0100
56360 [PATCH] Add AMCC Acadia (405EZ) eval board support
56362 This patch adds support for the new AMCC Acadia eval board.
56364 Please note that this Acadia/405EZ support is still in a beta stage.
56365 Still lot's of cleanup needed but we need a preliminary release now.
56367 Signed-off-by: Stefan Roese <sr@denx.de>
56369 commit e01bd218b00af73499331a1a701625a852cd286f
56370 Author: Stefan Roese <sr@denx.de>
56371 Date: Wed Mar 21 13:38:59 2007 +0100
56373 [PATCH] Add AMCC PPC405EZ support
56375 This patch adds support for the new AMCC 405EZ PPC. It is in
56376 preparation for the AMCC Acadia board support.
56378 Please note that this Acadia/405EZ support is still in a beta stage.
56379 Still lot's of cleanup needed but we need a preliminary release now.
56381 Signed-off-by: Stefan Roese <sr@denx.de>
56383 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
56384 Author: Heiko Schocher <hs@pollux.denx.de>
56385 Date: Wed Mar 21 08:45:17 2007 +0100
56387 [PATCH] TQM8272: dont change the bits given from the HRCW
56388 for the SIUMCR and BCR Register.
56389 Fix the calculation for the EEprom Size
56391 Signed-off-by: Heiko Schocher <hs@denx.de>
56393 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
56394 Author: Aubrey Li <aubrey.adi@gmail.com>
56395 Date: Tue Mar 20 18:16:24 2007 +0800
56397 [Blackfin][PATCH] Add BF561 EZKIT board support
56399 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
56400 Author: Aubrey Li <aubrey.adi@gmail.com>
56401 Date: Mon Mar 19 22:55:58 2007 +0800
56403 [Blackfin][PATCH] minor cleanup
56405 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
56406 Author: Wolfgang Denk <wd@denx.de>
56407 Date: Mon Mar 19 13:10:08 2007 +0100
56409 Remove obsoleted POST files.
56411 Signed-off-by: Wolfgang Denk <wd@denx.de>
56413 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
56414 Author: Aubrey Li <aubrey.adi@gmail.com>
56415 Date: Mon Mar 19 01:26:11 2007 +0800
56417 [PATCH] Add flash chip M29W320ET/B support
56419 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
56420 Author: Aubrey Li <aubrey.adi@gmail.com>
56421 Date: Mon Mar 19 01:24:52 2007 +0800
56423 [Blackfin][PATCH] Add BF537 stamp board support
56425 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
56426 Author: Stefan Roese <sr@denx.de>
56427 Date: Fri Mar 16 21:11:42 2007 +0100
56429 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
56431 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
56432 DDR memory are dynamically programmed matching the total size
56433 of the equipped memory (DIMM modules).
56435 Signed-off-by: Stefan Roese <sr@denx.de>
56437 commit 76d1466f918b881cda2d259254761e73885093c2
56438 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56439 Date: Tue Mar 13 13:38:05 2007 +0100
56441 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
56442 boards in terms of unification.
56444 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56446 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
56447 Author: Wolfgang Denk <wd@denx.de>
56448 Date: Tue Mar 13 16:05:55 2007 +0100
56450 Make SC3 board build with 'make O='; use 'addcons' consistently
56451 (SC3 and Jupiter used to use 'addcon' instead).
56453 Signed-off-by: Wolfgang Denk wd@denx.de
56455 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
56456 Author: Heiko Schocher <hs@pollux.denx.de>
56457 Date: Tue Mar 13 09:40:59 2007 +0100
56459 [PATCH] update board config for jupiter Board:
56461 CONFIG_CMDLINE_EDITING,
56462 CFG_ENV_ADDR_REDUND activated
56464 Signed-off-by: Heiko Schocher <hs@denx.de>
56466 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
56467 Author: Aubrey Li <aubrey.adi@gmail.com>
56468 Date: Mon Mar 12 12:11:55 2007 +0800
56470 [Blackfin][PATCH] minor cleanup
56472 commit bfa5754a58477ac917d21527cd0f079d87cf188e
56473 Author: Aubrey Li <aubrey.adi@gmail.com>
56474 Date: Mon Mar 12 01:42:06 2007 +0800
56476 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
56478 commit 8440bb14581a294375c34b91b42512f9753d1130
56479 Author: Aubrey Li <aubrey.adi@gmail.com>
56480 Date: Mon Mar 12 00:25:14 2007 +0800
56482 [Blackfin][PATCH] code cleanup
56484 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
56485 Author: Michal Simek <monstr@monstr.eu>
56486 Date: Sun Mar 11 13:48:24 2007 +0100
56488 [Microblaze][PATCH] part 2
56490 interrupt controller support
56494 board information support
56496 booting image support
56498 adding support for Xilinx ML401
56500 commit 76316a318de91f6184e7c22a10e02d275ade2441
56501 Author: Michal Simek <monstr@monstr.eu>
56502 Date: Sun Mar 11 13:42:58 2007 +0100
56504 [Microblaze][PATCH]
56506 interrupt controller support
56510 board information support
56512 booting image support
56514 adding support for Xilinx ML401
56516 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
56517 Author: Aubrey Li <aubrey.adi@gmail.com>
56518 Date: Sat Mar 10 23:49:29 2007 +0800
56520 [Blackfin][PATCH] code cleanup
56522 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
56523 Author: Aubrey.Li <aubrey.adi@gmail.com>
56524 Date: Fri Mar 9 13:40:56 2007 +0800
56526 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
56528 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
56529 Author: Aubrey.Li <aubrey.adi@gmail.com>
56530 Date: Fri Mar 9 13:38:44 2007 +0800
56532 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
56534 commit 992423ab43c2bcf6b704853bd00af77450915e20
56535 Author: Stefan Roese <sr@denx.de>
56536 Date: Thu Mar 8 23:00:08 2007 +0100
56538 ppc4xx: Fix file mode of sequoia.c
56540 Signed-off-by: Stefan Roese <sr@denx.de>
56542 commit eb92f613556800f7483666db09d9a237ad911d4a
56543 Author: Wolfgang Denk <wd@pollux.denx.de>
56544 Date: Thu Mar 8 22:52:51 2007 +0100
56548 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
56549 Author: John Otken john@softadvances.com <john@softadvances.com>
56550 Date: Thu Mar 8 09:39:48 2007 -0600
56552 ppc4xx: Clear Sequoia/Rainier security engine reset bits
56554 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
56556 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
56557 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56558 Date: Thu Mar 8 16:26:52 2007 +0100
56560 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
56562 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56564 commit d9fc703246840c4b268debf48c334ba55c597dc0
56565 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56566 Date: Thu Mar 8 16:25:47 2007 +0100
56568 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
56570 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56572 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
56573 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56574 Date: Thu Mar 8 16:23:11 2007 +0100
56576 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
56578 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56580 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
56581 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56582 Date: Thu Mar 8 16:20:32 2007 +0100
56584 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
56586 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56588 commit f9fc6a5852a6335840882fa2111925010eea1abe
56589 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56590 Date: Wed Mar 7 15:32:01 2007 +0100
56592 fixed ethernet phy configuration for plu405 board
56594 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
56596 commit 769104c9356594deb2092e204a39c05b33202d6c
56597 Author: Wolfgang Denk <wd@pollux.denx.de>
56598 Date: Thu Mar 8 21:49:27 2007 +0100
56602 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
56603 Author: Stefan Roese <sr@denx.de>
56604 Date: Thu Mar 8 10:13:16 2007 +0100
56606 [PATCH] Update AMCC Luan 440SP eval board support
56608 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
56609 inititializition. This includes DDR auto calibration and support
56610 for different DIMM modules, instead of the fixed setup used in
56611 the earlier version.
56613 This patch also enables the cache in FLASH for the startup
56614 phase of U-Boot (while running from FLASH). After relocating to
56615 SDRAM the cache is disabled again. This will speed up the boot
56616 process, especially the SDRAM setup, since there are some loops
56617 for memory testing (auto calibration).
56619 Signed-off-by: Stefan Roese <sr@denx.de>
56621 commit 2f5df47351910a2936c7741cf111855829200943
56622 Author: Stefan Roese <sr@denx.de>
56623 Date: Thu Mar 8 10:10:18 2007 +0100
56625 [PATCH] Update AMCC Yucca 440SPe eval board support
56627 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
56628 inititializition. This includes DDR auto calibration and support
56629 for different DIMM modules, instead of the fixed setup used in
56630 the earlier version.
56632 Signed-off-by: Stefan Roese <sr@denx.de>
56634 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
56635 Author: Stefan Roese <sr@denx.de>
56636 Date: Thu Mar 8 10:07:18 2007 +0100
56638 ppc4xx: Small AMCC Katmai 440SPe update
56640 Signed-off-by: Stefan Roese <sr@denx.de>
56642 commit df294497479b1dca6dd86318b2a912f72fede0df
56643 Author: Stefan Roese <sr@denx.de>
56644 Date: Thu Mar 8 10:06:09 2007 +0100
56646 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
56648 Signed-off-by: Stefan Roese <sr@denx.de>
56650 commit 83853178bd36bca6f0f8f1331476620c84a587fc
56651 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
56652 Date: Wed Mar 7 12:14:50 2007 -0600
56654 net - Support ping reply when processing net-loop
56656 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
56658 This permits the ping command to test the phy interface when the phy
56659 is put in loopback mode (typically by setting register 0 bit 14).
56661 It also allows the port to respond to an external ping when u-boot is
56662 processing some other net command (such as tftp). This is useful when
56663 tftp appears to hang.
56665 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
56666 Signed-off-by: Ben Warren <bwarren@qstreams.com>
56668 commit fa1aef15bcd47736687be1af544506e90fba545d
56669 Author: Stefan Roese <sr@denx.de>
56670 Date: Wed Mar 7 16:43:00 2007 +0100
56672 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
56674 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
56675 DDR memory are dynamically programmed matching the total size
56676 of the equipped memory (DIMM modules).
56678 Signed-off-by: Stefan Roese <sr@denx.de>
56680 commit e2ebe696818939e2b974628be9c921ea3fe9de13
56681 Author: Stefan Roese <sr@denx.de>
56682 Date: Wed Mar 7 16:39:36 2007 +0100
56684 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
56686 This patch fixes a problem that occurs when 2 DIMM's are
56687 used. This problem was first spotted and fixed by Gerald Jackson
56688 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
56689 problem in a little more clever way.
56691 This patch also adds the nice functionality to dynamically
56692 create the TLB entries for the SDRAM (tlb.c). So we should
56693 never run into such problems with wrong (too short) TLB
56694 initialization again on these platforms.
56696 As this feature is new to the "old" 44x SPD DDR driver, it
56697 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
56699 Signed-off-by: Stefan Roese <sr@denx.de>
56701 commit 39218433983417b9df087976a79e3f80dd5e83d6
56702 Author: Wolfgang Denk <wd@denx.de>
56703 Date: Wed Mar 7 16:33:44 2007 +0100
56705 UC101: fix compiler warnings
56707 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
56708 Author: Wolfgang Denk <wd@pollux.denx.de>
56709 Date: Wed Mar 7 16:19:46 2007 +0100
56711 HMI1001: fix build error, cleanup compiler warnings.
56713 commit ad5bb451ade552c44bef9119d907929ebc2c126f
56714 Author: Wolfgang Denk <wd@pollux.denx.de>
56715 Date: Tue Mar 6 18:08:43 2007 +0100
56717 Restructure POST directory to support of other CPUs, boards, etc.
56719 commit a5284efd125967675b2e9c6ef7b95832268ad360
56720 Author: Wolfgang Denk <wd@pollux.denx.de>
56721 Date: Tue Mar 6 18:01:47 2007 +0100
56723 Fix HOSTARCH handling.
56724 Patch by Mike Frysinger, Mar 05 2007
56726 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
56727 Author: Stefan Roese <sr@denx.de>
56728 Date: Tue Mar 6 07:47:04 2007 +0100
56730 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
56732 As provided by the AMCC applications team, this patch optimizes the
56733 DDR2 setup for 166MHz bus speed. The values provided are also save
56734 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
56735 setup has to be adjusted as done in this patch.
56737 For this the NAND booting version had to include the "speed.c" file
56738 from the cpu/ppc4xx directory. With this addition the NAND SPL image
56739 will just fit into the 4kbytes of program space. gcc version 4.x as
56740 provided with ELDK 4.x is needed to generate this optimized code.
56742 Signed-off-by: Stefan Roese <sr@denx.de>
56744 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
56745 Author: Wolfgang Denk <wd@pollux.denx.de>
56746 Date: Sun Mar 4 01:36:05 2007 +0100
56750 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
56751 Author: Kim Phillips <kim.phillips@freescale.com>
56752 Date: Wed Feb 28 00:02:04 2007 -0600
56754 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
56756 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
56758 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
56759 Author: Kumar Gala <galak@kernel.crashing.org>
56760 Date: Tue Feb 27 23:51:42 2007 -0600
56762 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
56764 The config value for:
56772 Were not being used when setting the appropriate register
56775 * CFG_SCCR_USBMPHCM
56780 To allow full config of the SCCR.
56782 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
56783 that were just bogus.
56785 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
56787 commit d51b3cf371cd441030460ef19d36b2924c361b1a
56788 Author: Kim Phillips <kim.phillips@freescale.com>
56789 Date: Thu Feb 22 20:06:57 2007 -0600
56791 mpc83xx: update [local-]mac-address properties on UEC based devices
56793 8360 and 832x weren't updating their [local-]mac-address
56794 properties. This patch fixes that.
56796 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
56798 commit 61f4f912acbe60776c5e00df1ec94094ce672957
56799 Author: Timur Tabi <timur@freescale.com>
56800 Date: Tue Feb 13 10:41:42 2007 -0600
56802 mpc83xx: write MAC address to mac-address and local-mac-address
56804 Some device trees have a mac-address property, some have local-mac-address,
56805 and some have both. To support all of these device trees, this patch
56806 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
56807 This function already updates local-mac-address.
56809 Signed-off-by: Timur Tabi <timur@freescale.com>
56811 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
56812 Author: Kim Phillips <kim.phillips@freescale.com>
56813 Date: Tue Feb 27 18:41:08 2007 -0600
56815 mpc83xx: add command line editing by default
56817 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
56818 Author: Kim Phillips <kim.phillips@freescale.com>
56819 Date: Wed Feb 14 19:50:53 2007 -0600
56821 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
56823 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
56824 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
56826 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
56828 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
56829 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
56831 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
56832 Author: Xie Xiaobo <r63061@freescale.com>
56833 Date: Wed Feb 14 18:27:17 2007 +0800
56835 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
56837 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
56838 it pass DDR/DDR2 compliance tests.
56840 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
56842 commit b110f40bd180c6b560276589beedf753e97c46ce
56843 Author: Xie Xiaobo <r63061@freescale.com>
56844 Date: Wed Feb 14 18:27:06 2007 +0800
56846 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
56848 MPC8360E rev2.0 have new spridr,and PVR value,
56849 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
56851 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
56853 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
56854 Author: Xie Xiaobo <r63061@freescale.com>
56855 Date: Wed Feb 14 18:26:44 2007 +0800
56857 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
56859 MPC8349E rev3.1 have new spridr,and PVR value,
56860 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
56862 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
56864 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
56865 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
56866 Date: Wed Jan 31 11:04:19 2007 +0100
56868 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
56870 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
56871 which is used to se if an slave will ACK after receiving its address.
56873 Correct i2c probing to use this method as the old method could upset
56874 a slave as it wrote a data byte to it.
56876 Add a small delay in i2c_init() to let the controller
56877 shutdown any ongoing I2C activity.
56879 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
56881 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
56882 Author: Timur Tabi <timur@freescale.com>
56883 Date: Wed Jan 31 15:54:29 2007 -0600
56885 mpc83xx: Add support for the MPC8349E-mITX-GP
56887 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
56888 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
56889 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
56891 Signed-off-by: Timur Tabi <timur@freescale.com>
56893 commit fab16807adad350f618024350c6950165c247c72
56894 Author: Timur Tabi <timur@freescale.com>
56895 Date: Wed Jan 31 15:54:20 2007 -0600
56897 mpc83xx: Delete sdram_init() for MPC8349E-mITX
56899 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
56900 never does anything. This patch deletes it.
56902 Signed-off-by: Timur Tabi <timur@freescale.com>
56904 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
56905 Author: Dave Liu <daveliu@freescale.com>
56906 Date: Fri Jan 19 10:43:26 2007 +0800
56908 mpc83xx: Fix the LAW1/3 bug
56910 The patch solves the alignment problem of the local bus access windows to
56911 render accessible the memory bank and PHY registers of UPC 1 (starting at
56912 0xf801 0000). What we actually did was to adjust the sizes of the bus
56913 access windows so that the base address alignment requirement would be met.
56915 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
56916 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
56917 Signed-off-by: Dave Liu <daveliu@freescale.com>
56919 commit 97c4b397dce236a7318b304667bf89e59d08b17c
56920 Author: Kim Phillips <kim.phillips@freescale.com>
56921 Date: Tue Jan 30 16:15:31 2007 -0600
56923 mpc83xx: don't hang if watchdog configured on 8360, 832x
56925 don't hang if watchdog configured on 8360, 832x
56927 The watchdog programming model is the same across all 83xx devices;
56928 make the code reflect that.
56930 commit b70047478570e371ce7223be342ce98afea0f7d6
56931 Author: Kim Phillips <kim.phillips@freescale.com>
56932 Date: Tue Jan 30 16:15:21 2007 -0600
56934 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
56936 protect memcpy to bad address if a local-mac-address is missing from dt
56938 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
56939 Author: Kim Phillips <kim.phillips@freescale.com>
56940 Date: Tue Jan 30 16:15:04 2007 -0600
56942 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
56944 make 8360 default environment fdt be 8360 (not 8349)
56946 commit a28899c910024a0226331df07207b1038c300c93
56947 Author: Emilian Medve <Emilian.Medve@freescale.com>
56948 Date: Tue Jan 30 16:14:50 2007 -0600
56950 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
56952 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
56953 be used for busy-waiting since it strips the 'volatile' property from
56954 the bd variable. gcc3 was working by pure luck.
56956 This is a follow on patch to "Fix the UEC driver bug of QE"
56958 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
56959 Author: Kumar Gala <galak@kernel.crashing.org>
56960 Date: Tue Jan 30 14:08:30 2007 -0600
56962 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
56964 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
56965 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
56966 CONFIG_MPC834X so they are more generic.
56968 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
56970 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
56971 Author: Kim Phillips <kim.phillips@freescale.com>
56972 Date: Thu Jan 25 13:40:55 2007 -0600
56974 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
56976 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
56977 Author: Kim Phillips <kim.phillips@freescale.com>
56978 Date: Wed Jan 24 17:18:37 2007 -0600
56980 mpc83xx: sort Makefile targets
56982 reordered targets alphabetically
56984 commit 91e25769771c1164ed63ffca0add49f934ae3343
56985 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
56986 Date: Tue Jan 16 11:38:14 2007 -0500
56988 mpc83xx: U-Boot support for Wind River SBC8349
56990 I've redone the SBC8349 support to match git-current, which
56991 incorporates all the MPC834x updates from Freescale since the 1.1.6
56992 release, including the DDR changes.
56994 I've kept all the SBC8349 files as parallel as possible to the
56995 MPC8349EMDS ones for ease of maintenance and to allow for easy
56996 inspection of what was changed to support this board. Hence the SBC8349
56997 U-Boot has FDT support and everything else that the MPC8349EMDS has.
56999 Fortunately the Freescale updates added support for boards using CS0,
57000 but I had to change spd_sdram.c to allow for board specific settings for
57001 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
57002 default if the board doesn't specify a value.)
57004 Hopefully this should be mergeable as-is and require no whitespace
57005 cleanups or similar, but if something doesn't measure up then let me
57006 know and I'll fix it.
57011 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
57012 Author: Sam Song <samsongshu@yahoo.com.cn>
57013 Date: Thu Dec 14 19:03:21 2006 +0800
57015 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
57017 A redundant semicolon existed in mpc8349itx.c
57020 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
57022 commit f35f358241c549be3f75cfe2eaa642914275b7ba
57023 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
57024 Date: Wed Dec 6 21:23:55 2006 -0500
57026 mpc83xx: Put the version (and magic) after the HRCW.
57028 Put the version (and magic) after the HRCW. This puts it in a fixed
57029 location in flash, not at the start of flash but as close as we can get.
57031 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
57033 commit 48aecd969171a6e99a55fae04933857787f9a5bd
57034 Author: Dave Liu <r63238@freescale.com>
57035 Date: Thu Dec 7 21:14:51 2006 +0800
57037 mpc83xx: Add the MPC832XEMDS board readme
57039 Add the MPC832XEMDS board readme
57041 Signed-off-by: Dave Liu <daveliu@freescale.com>
57043 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
57044 Author: Dave Liu <r63238@freescale.com>
57045 Date: Thu Dec 7 21:13:15 2006 +0800
57047 mpc83xx: Add support for the MPC832XEMDS board
57049 This patch supports DUART, ETH3/4 and PCI etc.
57051 Signed-off-by: Dave Liu <daveliu@freescale.com>
57053 commit e080313c32322e15ab5a18eb896a252858c57284
57054 Author: Dave Liu <r63238@freescale.com>
57055 Date: Thu Dec 7 21:11:58 2006 +0800
57057 mpc83xx: streamline the 83xx immr head file
57059 For better format and style, I streamlined the 83xx head files,
57060 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
57061 duplicated macro definition appear in the both files; 2) the structure
57062 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
57063 macro definition put inside the each structure. So, I cleaned up the
57064 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
57065 moved the macro definition to mpc83xx.h, Just like MPC8260.
57069 *streamline the 83xx immr head file
57071 Signed-off-by: Dave Liu <daveliu@freescale.com>
57073 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
57074 Author: Dave Liu <r63238@freescale.com>
57075 Date: Wed Dec 6 11:38:17 2006 +0800
57077 mpc83xx: Fix the UEC driver bug of QE
57079 The patch prevents the GCC tool chain from striping useful code for
57080 optimization. It will make UEC ethernet driver workable, Otherwise the
57081 UEC will fail in tx when you are using gcc4.x. but the driver can work
57082 when using gcc3.4.3.
57086 *Prevent the GCC from striping code for optimization, Otherwise the UEC
57087 will tx failed when you are using gcc4.x.
57089 Signed-off-by: Dave Liu <daveliu@freescale.com>
57091 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
57092 Author: Stefan Roese <sr@denx.de>
57093 Date: Thu Mar 1 21:11:36 2007 +0100
57095 [PATCH] Update AMCC Katmai 440SPe eval board support
57097 This patch updates the recently added Katmai board support. The biggest
57098 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
57101 Please note, that still some problems are left with some memory
57102 configurations. See the driver for more details.
57104 Signed-off-by: Stefan Roese <sr@denx.de>
57106 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
57107 Author: Stefan Roese <sr@denx.de>
57108 Date: Thu Mar 1 07:03:25 2007 +0100
57110 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
57112 Signed-off-by: Stefan Roese <sr@denx.de>
57114 commit ccbc7036648e465697ca298ba51e0e76dda352a0
57115 Author: Wolfgang Denk <wd@pollux.denx.de>
57116 Date: Wed Feb 28 01:28:53 2007 +0100
57118 SC3: fix typo in default environment
57120 commit e344568b1b46af85ec32d815586f91bc115d6223
57121 Author: Sergei Poselenov <sposelenov@emcraft.com>
57122 Date: Tue Feb 27 20:15:30 2007 +0300
57124 MCC200: Fixes for update procedure
57126 - fix logic error in image type handling
57127 - make sure file system images (cramfs etc.) get stored in flash
57128 with image header stripped so they can be mounted through MTD
57130 commit 743571145b37182757d4e688a77860b36ee77573
57131 Author: Wolfgang Denk <wd@pollux.denx.de>
57132 Date: Tue Feb 27 14:26:04 2007 +0100
57134 Minor code cleanup.
57136 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
57137 Author: Sergei Poselenov <sposelenov@emcraft.com>
57138 Date: Tue Feb 27 12:40:16 2007 +0300
57140 MCC200 update - add LCD Progress Indicator
57142 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
57143 Author: Stefan Roese <sr@denx.de>
57144 Date: Thu Feb 22 07:43:34 2007 +0100
57146 [PATCH] get_dev() now unconditionally uses manual relocation
57148 Since the relocation fix is not included yet and we're not sure how
57149 it will be added, this patch removes code that required relocation
57150 to be fixed for now.
57152 Signed-off-by: Stefan Roese <sr@denx.de>
57154 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
57155 Author: Stefan Roese <sr@denx.de>
57156 Date: Thu Feb 22 07:40:23 2007 +0100
57158 [PATCH] Change systemace driver to select 8 & 16bit mode
57160 As suggested by Grant Likely this patch enables the Xilinx SystemACE
57161 driver to select 8 or 16bit mode upon startup.
57163 Signed-off-by: Stefan Roese <sr@denx.de>
57165 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
57166 Author: Haiying Wang <Haiying.Wang@freescale.com>
57167 Date: Wed Feb 21 16:52:31 2007 +0100
57169 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
57171 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
57172 is fully finished. The sync() is defined in each CPU's io.h file. For
57173 those CPUs which do not need sync for now, a dummy sync() is defined in
57174 their io.h as well.
57176 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
57178 commit da04995c7dc6772013a9a0dc5c767f190c402478
57179 Author: Stefan Roese <sr@denx.de>
57180 Date: Wed Feb 21 13:44:34 2007 +0100
57182 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
57184 Signed-off-by: Stefan Roese <sr@denx.de>
57186 commit 751bb57107d78978ae08e697c3deba816f5be091
57187 Author: Stefan Roese <sr@denx.de>
57188 Date: Tue Feb 20 13:21:57 2007 +0100
57190 [PATCH] Fix relocation problem with "new" get_dev() function
57192 This patch enables the "new" get_dev() function for block devices
57193 introduced by Grant Likely to be used on systems that still suffer
57194 from the relocation problems (manual relocation neede because of
57195 problems with linker script).
57197 Hopefully we can resolve this relocation issue soon for all platform
57198 so we don't need this additional code anymore.
57200 Signed-off-by: Stefan Roese <sr@denx.de>
57202 commit d93e2212f962668b3dce091ff5edc33f2347fe37
57203 Author: Stefan Roese <sr@denx.de>
57204 Date: Tue Feb 20 13:17:42 2007 +0100
57206 [PATCH] Update SystemACE driver for 16bit access
57208 This patch removes some problems when the Xilinx SystemACE driver
57209 is used with 16bit access on an big endian platform (like the
57212 Signed-off-by: Stefan Roese <sr@denx.de>
57214 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
57215 Author: Stefan Roese <sr@denx.de>
57216 Date: Tue Feb 20 13:15:40 2007 +0100
57218 [PATCH] Clean up Katmai (440SPe) linker script
57220 Signed-off-by: Stefan Roese <sr@denx.de>
57222 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
57223 Author: Stefan Roese <sr@denx.de>
57224 Date: Tue Feb 20 10:57:08 2007 +0100
57226 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
57228 Signed-off-by: Stefan Roese <sr@denx.de>
57230 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
57231 Author: Stefan Roese <sr@denx.de>
57232 Date: Tue Feb 20 10:51:26 2007 +0100
57234 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
57236 This patch switches to the desired I2C bus when the date/dtt
57237 commands are called. This can be configured using the
57238 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
57240 Signed-off-by: Stefan Roese <sr@denx.de>
57242 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
57243 Author: Stefan Roese <sr@denx.de>
57244 Date: Tue Feb 20 10:43:34 2007 +0100
57246 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
57248 This patch adds support for the DDR2 controller used on the
57249 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
57250 board and works fine with the following DIMM modules:
57252 - Corsair CM2X512-5400C4 (512MByte per DIMM)
57253 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
57254 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
57256 This patch also adds the nice functionality to dynamically
57257 create the TLB entries for the SDRAM (tlb.c). So we should
57258 never run into such problems with wrong (too short) TLB
57259 initialization again on these platforms.
57261 Signed-off-by: Stefan Roese <sr@denx.de>
57263 commit 36d830c9830379045f5daa9f542ac1c990c70068
57264 Author: Stefan Roese <sr@denx.de>
57265 Date: Tue Feb 20 10:35:42 2007 +0100
57267 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
57269 Since the existing 4xx SPD SDRAM initialization routines for the
57270 405 SDRAM controller and the 440 DDR controller don't have much in
57271 common this patch splits both drivers into different files.
57273 This is in preparation for the 440 DDR2 controller support (440SP/e).
57275 Signed-off-by: Stefan Roese <sr@denx.de>
57277 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
57278 Author: Stefan Roese <sr@denx.de>
57279 Date: Tue Feb 20 10:27:08 2007 +0100
57281 [PATCH] PPC4xx: Add support for multiple I2C busses
57283 This patch adds support for multiple I2C busses on the PPC4xx
57284 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
57285 to make use of this feature.
57287 It also merges the 405 and 440 i2c header files into one common
57290 Also the 4xx i2c reset procedure is reworked since I experienced
57291 some problems with the first access on the 440SPe Katmai board.
57293 Signed-off-by: Stefan Roese <sr@denx.de>
57295 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
57296 Author: Grant Likely <grant.likely@secretlab.ca>
57297 Date: Tue Feb 20 09:05:45 2007 +0100
57299 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
57301 Block device read/write is anonymous data; there is no need to use a
57302 typed pointer. void * is fine. Also add a hook for block_read functions
57304 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57306 commit 53758fa20e935cc87eeb0519ed365df753a6f289
57307 Author: Grant Likely <grant.likely@secretlab.ca>
57308 Date: Tue Feb 20 09:05:38 2007 +0100
57310 [PATCH 8_9] Add block_write hook to block_dev_desc_t
57312 Preparation for future patches which support block device writing
57314 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57316 commit f4852ebe6ca946a509667eb68be42026f837be76
57317 Author: Grant Likely <grant.likely@secretlab.ca>
57318 Date: Tue Feb 20 09:05:31 2007 +0100
57320 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
57322 Register read/write does not need to be wrapped in a full function. The
57323 patch replaces them with macros.
57325 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57327 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
57328 Author: Grant Likely <grant.likely@secretlab.ca>
57329 Date: Tue Feb 20 09:05:23 2007 +0100
57331 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
57333 The code in this file is not a command; it is a device driver. Put it in
57334 the correct place. There are zero functional changes in this patch, it
57335 only moves the file.
57337 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57339 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
57340 Author: Grant Likely <grant.likely@secretlab.ca>
57341 Date: Tue Feb 20 09:05:16 2007 +0100
57343 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
57345 This patch is in preparation of additional changes to the sysace driver.
57346 May as well take this opportunity to fixup the inconsistent whitespace since
57347 this file is about to undergo major changes anyway.
57349 There are zero functional changes in this patch. It only cleans up the
57352 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57354 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
57355 Author: Grant Likely <grant.likely@secretlab.ca>
57356 Date: Tue Feb 20 09:05:07 2007 +0100
57358 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
57360 isprint is already defined in ctype.c
57362 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57364 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
57365 Author: Grant Likely <grant.likely@secretlab.ca>
57366 Date: Tue Feb 20 09:05:00 2007 +0100
57368 [PATCH 3_9] Move buffer print code from md command to common function
57370 Printing a buffer is a darn useful thing. Move the buffer print code
57371 into print_buffer() in lib_generic/
57373 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57375 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
57376 Author: Grant Likely <grant.likely@secretlab.ca>
57377 Date: Tue Feb 20 09:04:52 2007 +0100
57379 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
57381 Change the xilinx device drivers and board code to include config.h
57382 instead of xparameters.h directly. config.h always includes the
57383 correct xparameters file. This change reduces the posibility of
57384 including the wrong file when adding a new xilinx board port
57386 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57388 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
57389 Author: Grant Likely <grant.likely@secretlab.ca>
57390 Date: Tue Feb 20 09:04:34 2007 +0100
57392 [PATCH 1_4] Merge common get_dev() routines for block devices
57394 Each of the filesystem drivers duplicate the get_dev routine. This change
57395 merges them into a single function in part.c
57397 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57399 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
57400 Author: Wolfgang Denk <wd@pollux.denx.de>
57401 Date: Mon Feb 19 23:09:51 2007 +0100
57403 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
57404 as root file system images.
57406 commit 489c696ae7211218961d159e43e722d74c36fcbc
57407 Author: Sergei Poselenov <sposelenov@emcraft.com>
57408 Date: Wed Feb 14 14:30:28 2007 +0300
57410 MCC200: Extensions to Software Update Mechanism
57412 Update / extend Software Update Mechanism for MCC200 board:
57414 - Add support for rootfs image added. The environment variables
57415 "rootfs_st" and "rootfs_nd" can be used to override the default
57416 values of the image start and end.
57417 - Remove excessive key check code.
57420 commit 4be23a12f23f1372634edc3215137b09768b7949
57421 Author: Stefan Roese <sr@denx.de>
57422 Date: Mon Feb 19 08:23:15 2007 +0100
57424 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
57426 As spotted by Matthias Fuchs, the READY input should not be
57427 enabled for the NOR FLASH on the Sequoia board.
57429 Signed-off-by: Stefan Roese <sr@denx.de>
57431 commit 2605e90bf676d48123afe5719a846d2b52b24aac
57432 Author: Heiko Schocher <hs@pollux.denx.de>
57433 Date: Fri Feb 16 07:57:42 2007 +0100
57435 [PATCH] Added support for the jupiter board.
57437 Signed-off-by: Heiko Schocher <hs@denx.de>
57439 commit 497d012e5be0194e1084073d0081eb1a844796b2
57440 Author: Gary Jennejohn <garyj@pollux.denx.de>
57441 Date: Mon Feb 12 13:11:50 2007 +0100
57443 LPC2292: patch from Siemens.
57445 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
57446 Author: Stefan Roese <sr@denx.de>
57447 Date: Sat Feb 10 08:49:31 2007 +0100
57449 [PATCH] Add missing p3mx.h file to repository (ups)
57451 Signed-off-by: Stefan Roese <sr@denx.de>
57453 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
57454 Author: Bartlomiej Sieka <tur@semihalf.com>
57455 Date: Fri Feb 9 10:45:42 2007 +0100
57457 [Motion-PRO] Preliminary support for the Motion-PRO board.
57459 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
57460 Author: Stefan Roese <sr@denx.de>
57461 Date: Wed Feb 7 16:51:08 2007 +0100
57463 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
57465 Some boards that can have more than 768MBytes of SDRAM need to
57466 set "initrd_high", so that the initrd can be accessed by the
57469 Signed-off-by: Stefan Roese <sr@denx.de>
57471 commit 7372ca68227930d03cffa548310524cad5b96733
57472 Author: Stefan Roese <sr@denx.de>
57473 Date: Fri Feb 2 12:44:22 2007 +0100
57475 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
57477 Previously the strapping DCR/SDR was read to determine if the internal PCI
57478 arbiter is enabled or not. This strapping bit can be overridden, so now
57479 the current status is read from the correct DCR/SDR register.
57481 Signed-off-by: Stefan Roese <sr@denx.de>
57483 commit 2aa54f651a42d198673318f07a20c89a43e4d197
57484 Author: Stefan Roese <sr@denx.de>
57485 Date: Fri Feb 2 12:42:08 2007 +0100
57487 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
57489 Signed-off-by: Stefan Roese <sr@denx.de>
57491 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
57492 Author: Stefan Roese <sr@denx.de>
57493 Date: Thu Feb 1 13:22:41 2007 +0100
57495 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
57497 When PCI PNP is enabled the pci pnp configuration routine is called
57498 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
57499 problems with some PCI cards. For now disable the PCI PNP configuration.
57501 Signed-off-by: Stefan Roese <sr@denx.de>
57503 commit 2902fadade3be7659467e8d074048c6b7068f5c0
57504 Author: Stefan Roese <sr@denx.de>
57505 Date: Wed Jan 31 16:56:10 2007 +0100
57507 [PATCH] Update 440EPx/440GRx cpu detection
57509 Signed-off-by: Stefan Roese <sr@denx.de>
57511 commit d5ea287b02a6945c3977410e364a879dd1a555c8
57512 Author: Stefan Roese <sr@denx.de>
57513 Date: Wed Jan 31 16:38:04 2007 +0100
57515 [PATCH] Update esd cpci5200 files
57517 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
57519 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
57520 Author: Stefan Roese <sr@denx.de>
57521 Date: Wed Jan 31 16:37:34 2007 +0100
57523 [PATCH] Add support for esd mecp5200 board
57525 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
57527 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
57528 Author: Stefan Roese <sr@denx.de>
57529 Date: Wed Jan 31 12:38:50 2007 +0100
57531 [PATCH] Remove unneccessary yellowstone board config file
57533 Signed-off-by: Stefan Roese <sr@denx.de>
57535 commit e802594b6fa1b166308820c276b96dc0d7cc731c
57536 Author: Stefan Roese <sr@denx.de>
57537 Date: Tue Jan 30 17:06:10 2007 +0100
57539 [PATCH] Update Sequoia (440EPx) config file
57541 The config file now handles the 2nd target, the Rainier (440GRx)
57542 evaluation board better. Additionally the PPC input clock was
57543 adjusted to match the correct value of 33.0 MHz.
57545 Signed-off-by: Stefan Roese <sr@denx.de>
57547 commit 700200c67e73b83751418abe7815840dca8fd6cb
57548 Author: Stefan Roese <sr@denx.de>
57549 Date: Tue Jan 30 17:04:19 2007 +0100
57551 [PATCH] Merge Yosemite & Yellowstone board ports
57553 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
57554 share one config file and all board specific files. This way we
57555 don't have to maintain two different sets of files for nearly
57558 Signed-off-by: Stefan Roese <sr@denx.de>
57560 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
57561 Author: Stefan Roese <sr@denx.de>
57562 Date: Tue Jan 30 15:01:49 2007 +0100
57564 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
57566 SCPU doesn't use redundant environment in flash.
57568 Signed-off-by: Stefan Roese <sr@denx.de>
57570 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
57571 Author: Stefan Roese <sr@denx.de>
57572 Date: Tue Jan 30 12:51:07 2007 +0100
57574 [PATCH] alpr: Update alpr board config file
57576 Signed-off-by: Stefan Roese <sr@denx.de>
57578 commit f8db84f132b1e335f20f96138a1f09ed97b08664
57579 Author: Wolfgang Denk <wd@pollux.denx.de>
57580 Date: Tue Jan 30 00:50:40 2007 +0100
57582 LPC2292 SODIMM port coding style cleanup.
57584 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
57585 Author: Gary Jennejohn <garyj@pollux.denx.de>
57586 Date: Wed Jan 24 12:16:56 2007 +0100
57588 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
57590 commit 2daf046ba627f85f44195815778140039636244e
57591 Author: Bartlomiej Sieka <tur@semihalf.com>
57592 Date: Tue Jan 23 17:22:06 2007 +0100
57594 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
57596 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
57597 Author: Bartlomiej Sieka <tur@semihalf.com>
57598 Date: Tue Jan 23 14:21:14 2007 +0100
57600 [iDMR] Flash driver on initialisation write-protects some sectors,
57601 currently sectors 0-3. Sector 3 does not need to be protected, though
57602 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
57603 fixes this, i.e., only sectors 0-2 are protected.
57605 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
57606 Author: Bartlomiej Sieka <tur@semihalf.com>
57607 Date: Tue Jan 23 14:11:22 2007 +0100
57609 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
57610 "mii device" results in "Unexpected exception"). Fixing this properly
57611 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
57612 this commit disables MII commads for now.
57614 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
57615 Author: Bartlomiej Sieka <tur@semihalf.com>
57616 Date: Tue Jan 23 13:25:22 2007 +0100
57618 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
57619 Identification Register (CIR).
57621 commit fdef388758506765d4d6a7155c8f1584c63ff581
57622 Author: roy zang <tie-fei.zang@freescale.com>
57623 Date: Mon Jan 22 13:19:21 2007 +0800
57625 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
57626 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
57627 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
57630 commit a4012396645533aef218354eeba754dff0deace8
57631 Author: Wolfgang Denk <wd@pollux.denx.de>
57632 Date: Fri Jan 19 23:08:39 2007 +0100
57634 Minor code cleanup.
57636 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
57637 Author: Heiko Schocher <hs@pollux.denx.de>
57638 Date: Fri Jan 19 19:57:10 2007 +0100
57640 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
57642 Signed-off-by: Heiko Schocher <hs@denx.de>
57644 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
57645 Author: Heiko Schocher <hs@pollux.denx.de>
57646 Date: Fri Jan 19 18:05:26 2007 +0100
57648 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
57649 if you must swap the bytes between reading/writing.
57650 (Needed for the SC3 board)
57652 Signed-off-by: Heiko Schocher <hs@denx.de>
57654 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
57655 Author: Stefan Roese <sr@denx.de>
57656 Date: Thu Jan 18 16:05:47 2007 +0100
57658 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
57660 Signed-off-by: Stefan Roese <sr@denx.de>
57662 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
57663 Author: Stefan Roese <sr@denx.de>
57664 Date: Thu Jan 18 11:54:52 2007 +0100
57666 [PATCH] Update Prodrive P3Mx support
57668 Signed-off-by: Stefan Roese <sr@denx.de>
57670 commit 34167a36c29ee946b727465db5c014746a08e978
57671 Author: Stefan Roese <sr@denx.de>
57672 Date: Thu Jan 18 11:48:10 2007 +0100
57674 [PATCH] Add missing Taishan config file
57676 Signed-off-by: Stefan Roese <sr@denx.de>
57678 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
57679 Author: Heiko Schocher <hs@pollux.denx.de>
57680 Date: Thu Jan 18 11:28:51 2007 +0100
57682 [PATCH] Fix: Compilerwarnings for SC3 board.
57683 The EBC Configuration Register is now by CFG_EBC_CFG definable
57684 Added JFFS2 support for the SC3 board.
57686 Signed-off-by: Heiko Schocher <hs@denx.de>
57688 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
57689 Author: Stefan Roese <sr@denx.de>
57690 Date: Thu Jan 18 10:25:34 2007 +0100
57692 [PATCH] Add support for AMCC Taishan PPC440GX eval board
57694 Signed-off-by: Stefan Roese <sr@denx.de>
57696 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
57697 Author: Wolfgang Denk <wd@pollux.denx.de>
57698 Date: Tue Jan 16 18:30:50 2007 +0100
57700 Raname solidcard3 into sc3; add redundant env for sc3
57702 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
57703 Author: Wolfgang Denk <wd@pollux.denx.de>
57704 Date: Tue Jan 16 12:46:35 2007 +0100
57706 Update default environment for Solidcard3
57708 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
57709 Author: Stefan Roese <sr@denx.de>
57710 Date: Mon Jan 15 09:46:29 2007 +0100
57712 [PATCH] Fix 440SPe rev B detection from previous patch
57714 Signed-off-by: Stefan Roese <sr@denx.de>
57716 commit a443d31410c571ee8f970da819a44d698fdd6b1f
57717 Author: Heiko Schocher <hs@pollux.denx.de>
57718 Date: Sun Jan 14 13:35:31 2007 +0100
57720 [FIX] correct I2C Writes for the LM81 Sensor.
57722 Signed-off-by: Heiko Schocher <hs@denx.de>
57724 commit 0bba5452835f19a61204edcda3a58112fd8e2208
57725 Author: Wolfgang Denk <wd@pollux.denx.de>
57726 Date: Sat Jan 13 11:17:10 2007 +0100
57728 Undo commit 3033ebb2: reset command does not take any arguments
57730 Haiying Wang's modification to the reset command was broken, undo it.
57732 Signed-off-by: Wolfgang Denk <wd@denx.de>
57734 commit 95981778cff0038fd9941044d6a3eda810e33258
57735 Author: Stefan Roese <sr@denx.de>
57736 Date: Sat Jan 13 08:01:03 2007 +0100
57738 [PATCH] Update 440SP(e) cpu revisions
57740 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
57742 Signed-off-by: Stefan Roese <sr@denx.de>
57744 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
57745 Author: Stefan Roese <sr@denx.de>
57746 Date: Sat Jan 13 07:59:56 2007 +0100
57748 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
57750 Now the board revision and the current PCI bus speed are printed after
57753 Also the EBC initialising is now done via defines in the board config
57756 Signed-off-by: Stefan Roese <sr@denx.de>
57758 commit 36adff362c2c0141ff8a810d42a7e478f779130f
57759 Author: Stefan Roese <sr@denx.de>
57760 Date: Sat Jan 13 07:59:19 2007 +0100
57762 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
57764 Now the board revision and the current PCI bus speed are printed after
57767 Also the EBC initialising is now done via defines in the board config
57770 Signed-off-by: Stefan Roese <sr@denx.de>
57772 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
57773 Author: Stefan Roese <sr@denx.de>
57774 Date: Sat Jan 13 07:57:51 2007 +0100
57776 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
57778 Now the board revision and the current PCI bus speed are printed after
57781 Signed-off-by: Stefan Roese <sr@denx.de>
57783 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
57784 Author: Heiko Schocher <hs@pollux.denx.de>
57785 Date: Thu Jan 11 15:44:44 2007 +0100
57787 Added support for the SOLIDCARD III board from Eurodesign
57789 Signed-off-by: Heiko Schocher <hs@denx.de>
57791 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
57792 Author: Reinhard Thies <Reinhard.Thies@web.de>
57793 Date: Wed Jan 10 14:41:14 2007 +0100
57795 Adjusted default environment for cam5200 board.
57797 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
57798 Author: Wolfgang Denk <wd@pollux.denx.de>
57799 Date: Wed Jan 10 15:35:52 2007 +0100
57803 commit 787fa15860a57833e50bd30555079a9cd4e519b8
57804 Author: Wolfgang Denk <wd@pollux.denx.de>
57805 Date: Wed Jan 10 01:28:39 2007 +0100
57807 Fix auto_update for MCC200 board.
57809 The invocation of do_auto_update() is moved to the end of the
57810 misc_init_r() function, after the flash mappings have been
57811 initialized. Please find attached a patch that implements that
57814 Also correct the decoding of the keypad status. With this update, the
57815 key that will trigger the update is Column 2, Row 2.
57817 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
57818 Author: Marian Balakowicz <m8@semihalf.com>
57819 Date: Wed Jan 10 00:26:15 2007 +0100
57821 CAM5200 flash driver modifications:
57822 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
57823 - add second build target 'cam5200_niosflash' which still uses custom driver
57825 commit 67fea022fa957f59653b5238c7496f80a6b70432
57826 Author: Markus Klotzbuecher <mk@denx.de>
57827 Date: Tue Jan 9 16:02:48 2007 +0100
57829 SPC1920: cleanup memory contoller setup
57831 commit 8fc2102faa23593c80381437c09f7745a14deb40
57832 Author: Markus Klotzbuecher <mk@denx.de>
57833 Date: Tue Jan 9 14:57:14 2007 +0100
57835 Fix the cpu speed setup to work with all boards.
57837 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
57838 Author: Markus Klotzbuecher <mk@denx.de>
57839 Date: Tue Jan 9 14:57:13 2007 +0100
57841 SPC1920: add support for the FM18L08 Ramtron FRAM
57843 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
57844 Author: Markus Klotzbuecher <mk@denx.de>
57845 Date: Tue Jan 9 14:57:13 2007 +0100
57847 SPC1920: update the HPI register addresses to work with the second
57848 generation of hardware
57850 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
57851 Author: Markus Klotzbuecher <mk@creamnet.de>
57852 Date: Tue Jan 9 14:57:13 2007 +0100
57854 Miscellanious spc1920 related cleanups
57856 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
57857 Author: Markus Klotzbuecher <mk@denx.de>
57858 Date: Tue Jan 9 14:57:12 2007 +0100
57860 SPC1920 GO/NOGO led should be set to color red in U-Boot
57862 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
57863 Author: Markus Klotzbuecher <mk@creamnet.de>
57864 Date: Tue Jan 9 14:57:12 2007 +0100
57866 Add support for the DS3231 RTC
57868 commit 8139567b60d678584b05f0718a681f2047c5e14f
57869 Author: Markus Klotzbuecher <mk@creamnet.de>
57870 Date: Tue Jan 9 14:57:11 2007 +0100
57872 SMC1 uses external CLK4 instead of BRG on spc1920
57874 commit d8d9de1a02fbd880b613d607143d1f57342affc7
57875 Author: Markus Klotzbuecher <mk@creamnet.de>
57876 Date: Tue Jan 9 14:57:10 2007 +0100
57878 Update the SPC1920 CMB PLD driver
57880 commit 3f34f869162750e5e999fd140f884f5de952bcfe
57881 Author: Markus Klotzbuecher <mk@creamnet.de>
57882 Date: Tue Jan 9 14:57:10 2007 +0100
57884 Add / enable I2C support on the spc1920 board
57886 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
57887 Author: Markus Klotzbuecher <mk@creamnet.de>
57888 Date: Tue Jan 9 14:57:10 2007 +0100
57890 Add support for the tms320671x host port interface (HPI)
57892 commit f4eb54529bb3664c3a562e488b460fe075f79d67
57893 Author: Wolfgang Denk <wd@pollux.denx.de>
57894 Date: Sun Jan 7 00:13:11 2007 +0100
57896 Prepare for release 1.2.0
57898 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
57899 Author: Stefan Roese <sr@denx.de>
57900 Date: Sat Jan 6 15:58:09 2007 +0100
57902 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
57904 This patch fixes a problem with an incorrect setup for the refresh
57905 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
57907 Signed-off-by: Stefan Roese <sr@denx.de>
57909 commit f16c1da9577f06c5fc08651a4065537407de4635
57910 Author: Stefan Roese <sr@denx.de>
57911 Date: Sat Jan 6 15:56:13 2007 +0100
57913 [PATCH] Update ALPR board files
57915 This update brings the ALPR board support to the newest version.
57916 It also fixes a problem with the NAND driver.
57918 Signed-off-by: Stefan Roese <sr@denx.de>
57920 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
57921 Author: Stefan Roese <sr@denx.de>
57922 Date: Fri Jan 5 11:46:05 2007 +0100
57924 [PATCH] nand: Fix problem with oobsize calculation
57926 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
57928 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
57929 returns a 0x15. In the code fragment below bits [1:0] determine the
57930 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
57931 next field is also ANDed with 0x3. However this is a one bit field
57932 as defined in the Hynix and Samsung parts in the 4th ID byte that
57933 determins the oobsize, not a two bit field. It works on Samsung as
57934 bits[3:2] are 01. However for the Hynix there is a 11 in these two
57935 bits, so the oob size gets messed up.
57937 I checked the correct linux code and the suggested fix from Brian is
57938 also available in the linux nand mtd driver.
57940 Signed-off-by: Stefan Roese <sr@denx.de>
57942 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
57943 Author: Stefan Roese <sr@denx.de>
57944 Date: Fri Jan 5 10:40:36 2007 +0100
57946 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
57948 This fix will make the MAL burst disabling patch for the Linux
57949 EMAC driver obsolete.
57951 Signed-off-by: Stefan Roese <sr@denx.de>
57953 commit 023889838282b6237b401664f22dd22dfba2c066
57954 Author: Stefan Roese <sr@denx.de>
57955 Date: Fri Jan 5 10:38:05 2007 +0100
57957 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
57959 This code will optimize the DDR2 controller setup on a board specific
57962 Note: This code doesn't work right now on the NAND booting image for the
57963 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
57965 Signed-off-by: Stefan Roese <sr@denx.de>
57967 commit cce4acbb68398634b8d011ed7bb0d12269c84230
57968 Author: Bartlomiej Sieka <tur@semihalf.com>
57969 Date: Thu Dec 28 19:08:21 2006 +0100
57972 - fix a typo in V38B config file
57973 - move watchdog initialisation earlier in the boot process
57974 - add "wdt=off" to default kernel command line (disables kernel watchdog)
57976 commit 92eb729bad876725aeea908d2addba0800620840
57977 Author: Wolfgang Denk <wd@pollux.denx.de>
57978 Date: Wed Dec 27 01:26:13 2006 +0100
57980 Fix bug in adaption of Stefano Babic's CFI driver patch.
57982 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
57983 Author: Wolfgang Denk <wd@pollux.denx.de>
57984 Date: Sun Dec 24 01:42:57 2006 +0100
57986 Minor code cleanup.
57988 commit d784fdb05900ada3686d5778783e1fb328e9fb66
57989 Author: Stefano Babic <sbabic@denx.de>
57990 Date: Tue Dec 12 00:22:42 2006 +0100
57992 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
57994 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
57995 Author: Stefan Roese <sr@denx.de>
57996 Date: Fri Dec 22 14:29:40 2006 +0100
57998 [PATCH] Fix sequoia flash autodetection (finally correct)
58000 Now 32MByte and 64MByte FLASH is know to work and other
58001 configurations should work too.
58003 Signed-off-by: Stefan Roese <sr@denx.de>
58005 commit 82e5236a8b719543643fd26d5827938ab2b94818
58006 Author: Wolfgang Denk <wd@pollux.denx.de>
58007 Date: Fri Dec 22 10:30:26 2006 +0100
58009 Minor code cleanup; update CHANGELOG.
58011 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
58012 Author: Heiko Schocher <hs@pollux.denx.de>
58013 Date: Thu Dec 21 17:17:02 2006 +0100
58015 Added support for the TQM8272 board from TQ
58017 Signed-off-by: Heiko Schocher <hs@denx.de>
58019 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
58020 Author: Heiko Schocher <hs@pollux.denx.de>
58021 Date: Thu Dec 21 16:14:48 2006 +0100
58023 [PATCH] Add support for the UC101 board from MAN.
58025 Signed-off-by: Heiko Schocher <hs@denx.de>
58027 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
58028 Author: Bartlomiej Sieka <tur@semihalf.com>
58029 Date: Wed Dec 20 00:29:43 2006 +0100
58031 Fix to make the baudrate changes immediate for the MCF52x2 family.
58033 commit daa6e418bcc0c717752e8de939c213c790286096
58034 Author: Bartlomiej Sieka <tur@semihalf.com>
58035 Date: Wed Dec 20 00:27:32 2006 +0100
58037 Preliminary support for the iDMR board (ColdFire).
58039 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
58040 Author: Andrei Safronov <safronov@pollux.denx.de>
58041 Date: Fri Dec 8 16:23:08 2006 +0100
58043 automatic update mechanism
58045 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
58046 Author: roy zang <tie-fei.zang@freescale.com>
58047 Date: Mon Dec 4 17:56:59 2006 +0800
58049 Slight code clean up.
58050 Add comments, delete duplicate define and remove spaces.
58051 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58053 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
58054 Author: roy zang <tie-fei.zang@freescale.com>
58055 Date: Mon Dec 4 17:54:21 2006 +0800
58057 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
58058 multiplier table can not refect the real PLL clock behavior of these
58059 processors. Please refer to the hardware specification for detailed
58060 information of the corresponding processors.
58061 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58063 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
58064 Author: roy zang <tie-fei.zang@freescale.com>
58065 Date: Mon Dec 4 14:46:23 2006 +0800
58067 Remove the static MAC address, ip address, server ip, netmask and
58068 gateway ip for network setting.
58069 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58071 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
58072 Author: roy zang <tie-fei.zang@freescale.com>
58073 Date: Mon Dec 4 14:33:08 2006 +0800
58075 Remove the duplicate memory test code for mpc744ihpc2 board.
58076 If a memory test is needed, please use the functions in
58077 post/memory.c or memtest command.
58078 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58080 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
58081 Author: roy zang <tie-fei.zang@freescale.com>
58082 Date: Fri Dec 1 19:01:25 2006 +0800
58084 Fix the exception occuring in RAM table search issue.
58085 The original search_one_table() function code can only processes the search
58086 for the exception occurring in FLASH/ROM, because the exception and fixup
58087 table usually locate in FLASH. If the exception address is also in
58088 FLASH, it will be OK.
58089 If the exception occurs in RAM, after the u-boot relocation, a
58090 relocation offset should be added.
58092 clean up the code in cpu/74xx_7xx/cpu.c
58094 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58096 commit ee311214e0d216f904feea269599d0934bf71f23
58097 Author: roy zang <tie-fei.zang@freescale.com>
58098 Date: Fri Dec 1 11:47:36 2006 +0800
58100 Clean up the code according to codestyle:
58101 (1) remove some C++ comments.
58102 (2) remove trailing white space.
58103 (3) remove trailing empty line.
58104 (4) Indentation by table.
58105 (5) remove {} in one line condition.
58106 (6) add space before '(' in function call.
58107 Remove some weird printf () output.
58108 Add necessary comments.
58109 Modified Makefile to support building in a separate directory.
58111 commit dd520bf314c7add4183c5191692180f576f96b60
58112 Author: Wolfgang Denk <wd@pollux.denx.de>
58113 Date: Thu Nov 30 18:02:20 2006 +0100
58117 commit 8d9a8610b8256331132227e9e6585c6bd5742787
58118 Author: Wolfgang Denk <wd@pollux.denx.de>
58119 Date: Thu Nov 30 01:54:07 2006 +0100
58121 Code cleanup. Update CHANGELOG.
58123 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
58124 Author: Grant Likely <grant.likely@secretlab.ca>
58125 Date: Wed Nov 29 16:23:42 2006 +0100
58127 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
58129 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
58130 not the XLB frequency.
58132 This patch depends on the previous patches for MPC52xx device tree support
58134 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
58135 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
58137 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
58138 Author: Stefan Roese <sr@denx.de>
58139 Date: Wed Nov 29 15:42:37 2006 +0100
58141 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
58143 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
58144 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
58145 quite similar and share the same board directory "prodrive/p3mx"
58146 and the same config file "p3mx.h".
58148 Signed-off-by: Stefan Roese <sr@denx.de>
58150 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
58151 Author: Stefan Roese <sr@denx.de>
58152 Date: Wed Nov 29 12:53:15 2006 +0100
58154 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
58156 In the bootvx command the load address was only read from the env
58157 variable "loadaddr" and not optionally passed as paramter as described
58158 in the help. This is fixed with this patch. The behaviour is now the
58159 same as in the bootelf command.
58161 Signed-off-by: Stefan Roese <sr@denx.de>
58163 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
58164 Author: Stefan Roese <sr@denx.de>
58165 Date: Wed Nov 29 12:03:57 2006 +0100
58167 [PATCH] include/ppc440.h minor error affecting interrupts
58169 Fixed include/ppc440.c for UIC address Bug
58171 Corrects bug affecting the addresses for the universal interrupt
58172 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
58174 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
58175 Signed-off-by: Stefan Roese <sr@denx.de>
58177 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
58178 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
58179 Date: Tue Nov 28 16:17:27 2006 -0600
58181 Make fsl-i2c not conflict with SOFT I2C
58183 Signed-off-by: Timur Tabi <timur@freescale.com>
58185 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
58186 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
58187 Date: Tue Nov 28 16:17:18 2006 -0600
58189 Fix I2C master address initialization.
58191 Signed-off-by: Timur Tabi <timur@freescale.com>
58193 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
58194 Author: Kim Phillips <kim.phillips@freescale.com>
58195 Date: Tue Nov 28 23:31:19 2006 -0600
58197 Assign maintainers for mpc8349emds and mpc8360emds
58199 Dave for mpc8360emds, and me for mpc8349emds.
58201 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
58202 Author: Kim Phillips <kim.phillips@freescale.com>
58203 Date: Tue Nov 28 23:28:33 2006 -0600
58205 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
58207 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
58208 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
58210 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
58211 Author: Timur Tabi <timur@freescale.com>
58212 Date: Tue Nov 28 12:09:35 2006 -0600
58214 mpc83xx: Miscellaneous code style fixes
58216 Implement various code style fixes and similar changes.
58218 Signed-off-by: Timur Tabi <timur@freescale.com>
58220 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
58221 Author: Stefan Roese <sr@denx.de>
58222 Date: Tue Nov 28 17:55:49 2006 +0100
58224 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
58226 This patch adds the code and configuration necessary to boot with an
58227 arch/powerpc Linux kernel.
58229 Signed-off-by: Grant Likely <grant.likely@gmail.com>
58230 Acked-by: Jon Loeliger <jdl@freescale.com>
58232 commit e732faec95a83cb468b4850ae807c8301dde8f6a
58233 Author: Stefan Roese <sr@denx.de>
58234 Date: Tue Nov 28 16:09:24 2006 +0100
58236 [PATCH] PPC4xx: 440SP Rev. C detection added
58238 Signed-off-by: Stefan Roese <sr@denx.de>
58240 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
58241 Author: Stefan Roese <sr@denx.de>
58242 Date: Tue Nov 28 11:04:45 2006 +0100
58244 [PATCH] nand: Fix patch merge problem
58246 Signed-off-by: Stefan Roese <sr@denx.de>
58248 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
58249 Author: Stefan Roese <sr@denx.de>
58250 Date: Tue Nov 28 11:04:45 2006 +0100
58252 [PATCH] nand: Fix patch merge problem
58254 Signed-off-by: Stefan Roese <sr@denx.de>
58256 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
58257 Author: Wolfgang Denk <wd@pollux.denx.de>
58258 Date: Mon Nov 27 22:53:53 2006 +0100
58262 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
58263 Author: Stefan Roese <sr@denx.de>
58264 Date: Mon Nov 27 17:43:25 2006 +0100
58266 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
58268 Patch below corrects the setting of the zmiifer register, it was
58269 overwritting the register rather than ORing the settings.
58271 Signed-off-by: Neil Wilson <NWilson@airspan.com>
58272 Signed-off-by: Stefan Roese <sr@denx.de>
58274 commit d1a72545296800b7e219f93104ad5836f0003d66
58275 Author: Stefan Roese <sr@denx.de>
58276 Date: Mon Nov 27 17:34:10 2006 +0100
58278 [PATCH] Select NAND embedded environment from board configuration
58280 The current NAND Bootloader setup forces the environment
58281 variables to be in line with the bootloader. This change
58282 enables the configuration to be made in the board include
58283 file instead so that it can be individually enabled.
58285 Signed-off-by: Nick Spence <nick.spence@freescale.com>
58286 Signed-off-by: Stefan Roese <sr@denx.de>
58288 commit 15784862857c3c2214498defcfed84ff137fb81e
58289 Author: Stefan Roese <sr@denx.de>
58290 Date: Mon Nov 27 17:22:19 2006 +0100
58292 [PATCH] nand_wait() timeout fixes
58294 Two fixes for the nand_wait() function in
58295 drivers/nand/nand_base.c:
58297 1. Use correct timeouts. The original timeouts in Linux
58298 source are 400ms and 20ms not 40s and 20s
58300 2. Return correct error value in case of timeout. 0 is
58303 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
58304 Signed-off-by: Stefan Roese <sr@denx.de>
58306 commit da5553b095bf04f4f109ad7e565dae3aba47b230
58307 Author: Stefan Roese <sr@denx.de>
58308 Date: Mon Nov 27 17:04:06 2006 +0100
58310 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
58312 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
58313 arguments to bootm. It removes the getenv("disable_of") test that used
58314 to be used for this purpose.
58316 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
58317 Acked-by: Jon Loeliger <jdl@freescale.com>
58319 commit a9398e018593782c5fa7d0741955fc1256b34c1e
58320 Author: Wolfgang Denk <wd@pollux.denx.de>
58321 Date: Mon Nov 27 15:32:42 2006 +0100
58323 Minor code cleanup. Update CHANGELOG.
58325 commit 1729b92cde575476684bffe819d0b7791b57bff2
58326 Author: Stefan Roese <sr@denx.de>
58327 Date: Mon Nov 27 14:52:04 2006 +0100
58329 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
58331 Signed-off-by: Stefan Roese <sr@denx.de>
58333 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
58334 Author: Stefan Roese <sr@denx.de>
58335 Date: Mon Nov 27 14:49:51 2006 +0100
58337 [PATCH] alpr: remove unused board specific flash driver
58339 Signed-off-by: Stefan Roese <sr@denx.de>
58341 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
58342 Author: Stefan Roese <sr@denx.de>
58343 Date: Mon Nov 27 14:48:41 2006 +0100
58345 [PATCH] 4xx: Fix problem with board specific reset code
58347 Signed-off-by: Stefan Roese <sr@denx.de>
58349 commit ec0c2ec725aec9524a177a77ce75559e644a931a
58350 Author: Stefan Roese <sr@denx.de>
58351 Date: Mon Nov 27 14:46:06 2006 +0100
58353 [PATCH] Remove testing 4xx enet PHY setup
58355 Signed-off-by: Stefan Roese <sr@denx.de>
58357 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
58358 Author: Stefan Roese <sr@denx.de>
58359 Date: Mon Nov 27 14:12:17 2006 +0100
58361 [PATCH] Update Prodrive ALPR board support (440GX)
58363 Signed-off-by: Stefan Roese <sr@denx.de>
58365 commit 58b485776698c3d71ec5a215e392123b4c15afa3
58366 Author: Markus Klotzbuecher <mk@denx.de>
58367 Date: Mon Nov 27 11:51:21 2006 +0100
58369 Add a small README with information on the generic ohci driver.
58371 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
58372 Author: Markus Klotzbuecher <mk@denx.de>
58373 Date: Mon Nov 27 11:46:46 2006 +0100
58375 Fix some endianness issues related to the generic ohci driver
58377 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
58378 Author: Markus Klotzbuecher <mk@denx.de>
58379 Date: Mon Nov 27 11:44:58 2006 +0100
58381 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
58382 to choose between the old and the generic OHCI drivers.
58384 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
58385 Author: Markus Klotzbuecher <mk@denx.de>
58386 Date: Mon Nov 27 11:43:09 2006 +0100
58388 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
58389 and adapted board configs TQM5200 and yosemite accordingly. This commit
58390 also makes the maximum number of root hub ports configurable
58391 (CFG_USB_OHCI_MAX_ROOT_PORTS).
58393 commit 78d620ebb5871d252270dedfad60c6568993b780
58394 Author: Wolfgang Denk <wd@atlas.denx.de>
58395 Date: Thu Nov 23 22:58:58 2006 +0100
58397 Updates for TQM5200 modules:
58398 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
58399 - simplify "udate" definitions
58401 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
58402 Author: Stefan Roese <sr@denx.de>
58403 Date: Wed Nov 22 13:20:50 2006 +0100
58405 [PATCH] PPC4xx start.S: Fix for processor errata
58407 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
58408 errata 1.12: 440_33 by moving patch up in code.
58410 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
58411 Signed-off-by: Stefan Roese <sr@denx.de>
58413 commit 4ef6251403f637841000e0fef9e832aa01339822
58414 Author: Stefan Roese <sr@denx.de>
58415 Date: Mon Nov 20 20:39:52 2006 +0100
58417 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
58419 Signed-off-by: Stefan Roese <sr@denx.de>
58421 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
58422 Author: Wolfgang Denk <wd@pollux.denx.de>
58423 Date: Mon Nov 20 10:28:30 2006 +0100
58427 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
58428 Author: Stefan Roese <sr@denx.de>
58429 Date: Mon Nov 13 13:55:24 2006 +0100
58431 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
58433 * Adds support for AMD command set Top Boot flash geometry reversal
58434 * Adds support for reading JEDEC Manufacturer ID and Device ID
58435 * Adds support for displaying command set, manufacturer id and
58436 device ids (flinfo)
58437 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
58438 * Removes outdated change history (refer to git log instead)
58440 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
58441 Signed-off-by: Stefan Roese <sr@denx.de>
58443 commit b21b511d4c50408f4853f46f06b601272196223f
58444 Author: Wolfgang Denk <wd@pollux.denx.de>
58445 Date: Sun Nov 12 21:13:23 2006 +0100
58449 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
58450 Author: Bartlomiej Sieka <tur@semihalf.com>
58451 Date: Sat Nov 11 22:48:22 2006 +0100
58453 Disable the watchdog in the default config for the V38B board.
58455 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
58456 Author: Bartlomiej Sieka <tur@semihalf.com>
58457 Date: Sat Nov 11 22:43:00 2006 +0100
58459 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
58460 group is enabled for USB earlier (in cpu_init_f() instead of
58461 usb_lowlevel_init()).
58463 commit 91650b3e4de688038d4f71279c44858e3e2c6870
58464 Author: Wolfgang Denk <wd@pollux.denx.de>
58465 Date: Mon Nov 6 17:06:36 2006 +0100
58467 Sequential accesses to non-existent memory must be synchronized,
58468 at least on G2 cores.
58470 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
58472 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
58473 Author: Timur Tabi <timur@freescale.com>
58474 Date: Fri Nov 3 19:15:00 2006 -0600
58476 mpc83xx: Update 83xx to use fsl_i2c.c
58478 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
58479 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
58480 Added multiple I2C bus support to fsl_i2c.c.
58482 Signed-off-by: Timur Tabi <timur@freescale.com>
58484 commit d239d74b1c937984bc519083a8e7de373a390f06
58485 Author: Timur Tabi <timur@freescale.com>
58486 Date: Fri Nov 3 12:00:28 2006 -0600
58488 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
58490 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
58491 tree matches the other 8xxx trees.
58493 Signed-off-by: Timur Tabi <timur@freescale.com>
58495 commit f7fb2e703ec9688541416962724adff70a7322cb
58496 Author: Kim Phillips <kim.phillips@freescale.com>
58497 Date: Thu Nov 2 19:47:11 2006 -0600
58499 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
58501 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
58502 Author: Dave Liu <daveliu@freescale.com>
58503 Date: Thu Nov 2 18:05:50 2006 -0600
58505 mpc83xx: Fix the incorrect dcbz operation
58507 The 834x rev1.x silicon has one CPU5 errata.
58509 The issue is when the data cache locked with
58510 HID0[DLOCK], the dcbz instruction looks like no-op inst.
58512 The right behavior of the data cache is when the data cache
58513 Locked with HID0[DLOCK], the dcbz instruction allocates
58516 The 834x rev3.0 and later and 8360 have not this bug inside.
58518 So, when 834x rev3.0/8360 are working with ECC, the dcbz
58519 instruction will corrupt the stack in cache, the processor will
58522 However, the 834x rev1.x can work with ECC with these code,
58523 because the sillicon has this cache bug. The dcbz will not
58524 corrupt the stack in cache.
58525 Really, it is the fault code running on fault sillicon.
58527 This patch fix the incorrect dcbz operation. Instead of
58528 CPU FP writing to initialise the ECC.
58531 * Fix the incorrect dcbz operation instead of CPU FP
58532 writing to initialise the ECC memory. Otherwise, it
58533 will corrupt the stack in cache, The processor will checkstop
58536 Signed-off-by: Dave Liu <daveliu@freescale.com>
58538 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
58539 Author: Kim Phillips <kim.phillips@freescale.com>
58540 Date: Wed Nov 1 00:10:40 2006 -0600
58542 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
58544 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
58545 STDOUT_PATH configuration bits to mpc8349emds,
58546 mpc8349itx, and mpc8360emds board code.
58548 redo environment to use bootm with the fdtaddr
58549 for booting ARCH=powerpc kernels by default,
58550 and provide default fdtaddr values.
58552 commit 48041365b3420589ad464ebc7752e0053538b729
58553 Author: Kim Phillips <kim.phillips@freescale.com>
58554 Date: Wed Nov 1 00:07:25 2006 -0600
58556 mpc83xx: change ft code to modify local-mac-address property
58558 Update 83xx OF code to update local-mac-address properties
58559 for ethernet instead of the obsolete 'address' property.
58561 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
58562 Author: Timur Tabi <timur@freescale.com>
58563 Date: Tue Oct 31 21:23:16 2006 -0600
58565 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
58567 This patch also adds an improved I2C set_speed(), which handles all clock
58570 Signed-off-by: Timur Tabi <timur@freescale.com>
58572 commit ac4b5622ce050b5ee1e154b98df630d778661632
58573 Author: Dave Liu <daveliu@freescale.com>
58574 Date: Tue Oct 31 19:54:59 2006 -0600
58576 mpc83xx: add the README.mpc8360emds
58578 add doc/README.mpc8360emds to accompany the new board support
58580 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
58581 Author: Dave Liu <daveliu@freescale.com>
58582 Date: Fri Nov 3 12:11:15 2006 -0600
58584 mpc83xx: add QE ethernet support
58586 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
58588 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
58589 Author: Dave Liu <daveliu@freescale.com>
58590 Date: Fri Nov 3 19:33:44 2006 -0600
58592 mpc83xx: Add MPC8360EMDS basic board support
58594 Add support for the Freescale MPC8360EMDS board.
58595 Includes DDR, DUART, Local Bus, PCI.
58597 commit 23892e49352de74f7fac36ff90bb1be143d195e3
58598 Author: Dave Liu <daveliu@freescale.com>
58599 Date: Tue Oct 31 19:30:40 2006 -0600
58601 mpc83xx: add the QUICC Engine (QE) immap file
58603 common QE immap file. Also required for 8360.
58605 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
58606 Author: Dave Liu <daveliu@freescale.com>
58607 Date: Tue Oct 31 19:25:38 2006 -0600
58609 mpc83xx: Add 8360 specifics to 83xx immap
58611 Mainly add QE device dependencies, with appropriate 8360 protection.
58614 commit 988833324a7fda482c8ac3ca23eb539f8232e404
58615 Author: Timur Tabi <timur@freescale.com>
58616 Date: Tue Oct 31 19:14:41 2006 -0600
58618 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
58620 PREREQUISITE PATCHES:
58622 * This patch can only be applied after the following patches have been applied:
58624 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
58625 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
58629 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
58630 the clock for the 2nd USB board (Linux kernel will hang otherwise),
58631 and fix the CONFIG_BOOTARGS macro.
58633 Signed-off-by: Timur Tabi <timur@freescale.com>
58635 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
58636 Author: Timur Tabi <timur@freescale.com>
58637 Date: Tue Oct 31 18:44:42 2006 -0600
58639 mpc83xx: Add support for the MPC8349E-mITX
58641 PREREQUISITE PATCHES:
58643 * This patch can only be applied after the following patches have been applied:
58645 1) DNX#2006090742000024 "Add support for multiple I2C buses"
58646 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
58647 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
58648 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
58649 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
58653 * Add support for the Freescale MPC8349E-mITX reference design platform.
58654 The second TSEC (Vitesse 7385 switch) is not supported at this time.
58656 Signed-off-by: Timur Tabi <timur@freescale.com>
58658 commit 183da6d9b446cc12123455844ad1187e2375626f
58659 Author: Ben Warren <bwarren@qstreams.com>
58660 Date: Tue Sep 12 10:15:53 2006 -0400
58662 Additional MPC8349 support for multibus i2c
58666 Here is a patch for a file that was accidentally left out of a previous
58669 It accompanies the patch with ticket DNX#2006090742000024
58672 Change PCI initialization to use new multi-bus I2C API.
58677 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
58678 Author: Ben Warren <bwarren@qstreams.com>
58679 Date: Thu Sep 7 16:51:04 2006 -0400
58681 Multi-bus I2C implementation of MPC834x
58685 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
58686 family and the MPC8349EMDS board in particular.
58687 This patch requires Patch 1 (Add support for multiple I2C buses).
58688 Testing was performed on a 533MHz board.
58690 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
58692 Signed-off-by: Ben Warren <bwarren@qstreams.com>
58695 Implemented driver-level code to support two I2C buses on the
58696 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
58697 are 50kHz, 100kHz and 400kHz on each bus.
58702 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
58703 Author: Ben Warren <bwarren@qstreams.com>
58704 Date: Thu Sep 7 16:50:54 2006 -0400
58706 Add support for multiple I2C buses
58710 Attached is a patch providing support for multiple I2C buses at the
58711 command level. The second part of the patch includes an implementation
58712 for the MPC834x CPU and MPC8349EMDS board.
58714 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
58716 Signed-off-by: Ben Warren <bwarren@qstreams.com>
58720 1. Include new 'i2c' command (based on USB implementation) using
58721 CONFIG_I2C_CMD_TREE.
58723 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
58724 the commands to change bus number and speed are only available under the
58725 new 'i2c' command mentioned in the first bullet.
58727 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
58728 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
58729 of an array of bus-device pairs. Otherwise, it is an array of uchar.
58732 Added new 'i2c' master command for all I2C interaction. This is
58733 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
58734 setting I2C bus speed as well as changing the active bus if the board
58735 has more than one (conditionally compiled with
58736 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
58742 commit bed85caf872714ebf53013967a695c9d63acfc68
58743 Author: Timur Tabi <timur@freescale.com>
58744 Date: Tue Oct 31 18:13:36 2006 -0600
58746 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
58750 * Errata DDR6, which affects all current MPC 834x processors, lists changes
58751 required to maintain compatibility with various types of DDR memory. This
58752 patch implements those changes.
58754 Signed-off-by: Timur Tabi <timur@freescale.com>
58756 commit afd6e470f639883002c7c59d562690a5cb0f4865
58757 Author: Timur Tabi <timur@freescale.com>
58758 Date: Wed Oct 25 18:45:23 2006 -0500
58760 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
58762 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
58763 Author: Timur Tabi <timur@freescale.com>
58764 Date: Tue Aug 22 17:07:00 2006 -0500
58766 mpc83xx: Add support for variable flash memory sizes on 83xx systems
58770 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
58771 window registers, instead of using a hard-coded value of 8MB.
58773 Signed-off-by: Timur Tabi <timur@freescale.com>
58775 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
58776 Author: Tanya Jiang <tanya.jiang@freescale.com>
58777 Date: Thu Aug 3 18:38:13 2006 +0800
58779 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
58781 Unified TQM834x variable names with 83xx and consolidated macro
58782 in preparation for the 8360 and other upcoming 83xx devices.
58784 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
58786 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
58787 Author: Dave Liu <daveliu@freescale.com>
58788 Date: Wed Oct 25 14:41:21 2006 -0500
58790 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
58792 Incorporated the common unified variable names and the changes in preparation
58793 for releasing mpc8360 patches.
58795 Signed-off-by: Dave Liu <daveliu@freescale.com>
58797 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
58798 Author: Tanya Jiang <tanya.jiang@freescale.com>
58799 Date: Thu Aug 3 18:36:02 2006 +0800
58801 mpc83xx: Fix missing build for mpc8349emds pci.c
58803 Make pci build for mpc8349emds
58805 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
58807 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
58808 Author: Tanya Jiang <tanya.jiang@freescale.com>
58809 Date: Thu Aug 3 18:39:49 2006 +0800
58811 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
58813 Removed unused file resetvec.S for mpc83xx cpu
58815 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
58817 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
58818 Author: Nick Spence <Nick.Spence@freescale.com>
58819 Date: Sat Sep 30 00:32:59 2006 -0700
58821 NAND Flash verify across block boundaries
58823 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
58825 and the write crosses a block boundary. The pointer to the verification
58826 buffer (bufstart) is not being updated to reflect the starting of the
58828 block so the verification of the second block fails.
58832 * Fix NAND FLASH page verification across block boundaries
58834 commit f484dc791a3932537213c43c654cc1295c64b84c
58835 Author: Nick Spence <nick.spence@freescale.com>
58836 Date: Thu Sep 7 07:39:46 2006 -0700
58838 Added RGMII support to the TSECs and Marvell 881111 Phy
58840 Added a phy initialization to adjust the RGMII RX and TX timing
58841 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
58843 Signed-off-by: Nick Spence <nick.spence@freescale.com>
58845 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
58846 Author: roy zang <tie-fei.zang@freescale.com>
58847 Date: Fri Nov 3 13:10:00 2006 +0800
58849 Remove some unused CFG define.
58850 undef CFG_DRAM_TEST
58852 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
58853 Author: roy zang <tie-fei.zang@freescale.com>
58854 Date: Fri Nov 3 13:07:36 2006 +0800
58856 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
58857 Both work. 0xFF000000 seems more reasonable.
58859 commit c59200443072353044aa4bf737a5a60f9a9af231
58860 Author: Wolfgang Denk <wd@pollux.denx.de>
58861 Date: Thu Nov 2 15:15:01 2006 +0100
58863 Release U-Boot 1.1.6
58865 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
58866 Author: roy zang <tie-fei.zang@freescale.com>
58867 Date: Thu Nov 2 19:14:48 2006 +0800
58869 This patch comes from Yuli's posted patch on 8/8/2006
58870 titled "CFI Driver Little-Endian write Issue".
58872 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
58874 If that patch applied, please discard this one.
58875 Until now , I do not see his patch is applied. So please apply this one.
58877 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
58878 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58880 commit b825f158e449e1e9cf74c08e572955e122394c96
58881 Author: roy zang <tie-fei.zang@freescale.com>
58882 Date: Thu Nov 2 19:12:31 2006 +0800
58884 Tsi108 on chip i2c support.
58886 The i2c Interface provides a master-only, serial interface that can be
58887 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
58890 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58891 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58893 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
58894 Author: roy zang <tie-fei.zang@freescale.com>
58895 Date: Thu Nov 2 19:11:06 2006 +0800
58897 Tsi108 on chip pci controller support.
58899 If there is no pci card, the tsi108/109 pci configure read will
58900 cause a machine check exception to the processor. PCI error should
58901 also be cleared after the read.
58903 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58904 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58906 commit d1927cee977126e547ceeba23e4f978f377cfb8f
58907 Author: roy zang <tie-fei.zang@freescale.com>
58908 Date: Thu Nov 2 19:08:55 2006 +0800
58910 Tundra tsi108 on chip Ethernet controller support.
58912 The following is a brief description of the Ethernet controller:
58913 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
58914 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
58915 to manage the two physical connection devices (PHYs). Each Ethernet port
58916 has its own statistics monitor that tracks and reports key interface
58917 statistics. Each port supports a 256-entry hash table for address
58918 filtering. In addition, each port is bridged to the Switch Fabric
58919 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
58921 Each Ethernet port also has a pair of internal Ethernet DMA channels to
58922 support the transmit and receive data flows. The Ethernet DMA channels
58923 use descriptors set up in memory, the memory map of the device, and
58924 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
58925 handles arbitration for the Switch Fabric. The Controller also
58926 has a register businterface for register accesses and status monitor
58929 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
58930 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
58931 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
58932 data flows to and from the Ethernet Controller through the Switch Fabric.
58934 Each Ethernet port uses its transmit and receive DMA channels to manage
58935 data flows through buffer descriptors that are predefined by the
58936 system (the descriptors can exist anywhere in the system memory map).
58937 These descriptors are data structures that point to buffers filled
58938 with data ready to transmit over Ethernet, or they point to empty
58939 buffers ready to receive data from Ethernet.
58941 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58942 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58944 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
58945 Author: roy zang <tie-fei.zang@freescale.com>
58946 Date: Thu Nov 2 19:01:33 2006 +0800
58948 Tundra tsi108 header file.
58950 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
58951 PowerPC processors that offers numerous system interconnect options for
58952 embedded application designers. The Tsi108 can interconnect 60x or
58953 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
58954 and Flash. Provided the macro define for tsi108 chip.
58956 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58957 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58959 commit 87c4db09699c6b89176b31004afcb83eb1585d47
58960 Author: roy zang <tie-fei.zang@freescale.com>
58961 Date: Thu Nov 2 18:59:15 2006 +0800
58963 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58964 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
58966 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58967 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58969 commit 27801b8ab11c61b577e45742a515bb3b23b80241
58970 Author: roy zang <tie-fei.zang@freescale.com>
58971 Date: Thu Nov 2 18:57:21 2006 +0800
58973 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58974 Make ,config.mk and link file for the mpc7448hpc2 board.
58976 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58977 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58979 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
58980 Author: roy zang <tie-fei.zang@freescale.com>
58981 Date: Thu Nov 2 18:55:04 2006 +0800
58983 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58984 The mpc7448hpc2 board support header file.
58986 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58987 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58989 commit 625bb5ddb50b243f931262ca8c46956409471917
58990 Author: roy zang <tie-fei.zang@freescale.com>
58991 Date: Thu Nov 2 18:52:21 2006 +0800
58993 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58994 The mpc7448hpc2 board support low level assemble language init code.
58996 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58997 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58999 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
59000 Author: roy zang <tie-fei.zang@freescale.com>
59001 Date: Thu Nov 2 18:49:51 2006 +0800
59003 General code modification for mpc7448hpc2 board support.
59004 1. Add 7447A and 7448 processor support.
59005 2. Add the following flags.
59007 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
59008 (such as by switch on board), this flag should be set.
59010 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
59011 relocates to RAM, this flag should be set.
59013 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
59014 system hang in exception, this flag should be set.
59016 There is a design issue for tsi108/109 pci configure read. When pci scan
59017 the slots, if there is no pci card, the tsi108/9 will cause a machine
59018 check exception for mpc7448 processor.
59020 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
59021 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
59023 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
59024 Author: roy zang <tie-fei.zang@freescale.com>
59025 Date: Thu Nov 2 18:34:47 2006 +0800
59027 Add README file for mpc7448hpc2 board.
59028 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
59030 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
59031 Author: Bartlomiej Sieka <tur@semihalf.com>
59032 Date: Wed Nov 1 02:04:38 2006 +0100
59034 Finish up support for MarelV38B board
59035 - add watchdog support
59036 - enable GPIO_WKUP_7 pin for input
59039 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
59040 Author: Bartlomiej Sieka <tur@semihalf.com>
59041 Date: Wed Nov 1 01:45:46 2006 +0100
59043 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
59044 * remove warnings when compiling ethaddr.c
59045 * adjust linker script (fixes a crash resulting from incorrect
59046 definition of __u_boot_cmd_start)
59047 - Some MarelV38B code cleanup.
59049 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
59050 Author: Bartlomiej Sieka <tur@semihalf.com>
59051 Date: Wed Nov 1 01:38:16 2006 +0100
59053 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
59054 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
59055 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
59056 MPC5XXX_WU_GPIO_DATA_O for affected boards.
59058 - Add defintions for some MPC5XXX GPIO pins.
59060 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
59061 Author: Bartlomiej Sieka <tur@semihalf.com>
59062 Date: Wed Nov 1 01:34:29 2006 +0100
59064 Changed MarelV38B board make target to lowercase. Config file cleanup.
59066 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
59067 Author: Wolfgang Denk <wd@pollux.denx.de>
59068 Date: Sun Oct 29 01:03:51 2006 +0200
59070 Automatically adjust ARFLAGS so "make -s" is really silent.
59072 commit fae684e89844856383bdf101440889557df3e6b1
59073 Author: Stefan Roese <sr@denx.de>
59074 Date: Sat Oct 28 16:45:00 2006 +0200
59076 [PATCH] omap925.c: Remove unused functions
59078 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
59079 Signed-off-by: Stefan Roese <sr@denx.de>
59081 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
59082 Author: Stefan Roese <sr@denx.de>
59083 Date: Sat Oct 28 17:12:58 2006 +0200
59085 [PATCH] Add some missing machtypes for netstar & voiceblue boards
59087 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
59090 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
59091 Signed-off-by: Stefan Roese <sr@denx.de>
59093 commit 856f054410cef52d868feb330168b2a4c4091328
59094 Author: Stefan Roese <sr@denx.de>
59095 Date: Sat Oct 28 15:55:52 2006 +0200
59097 [PATCH] NAND: Partition name support added to NAND subsystem
59099 chpart, nboot and NAND subsystem related commands now accept also partition
59100 name to specify offset.
59102 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
59103 Signed-off-by: Stefan Roese <sr@denx.de>
59105 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
59106 Author: Wolfgang Denk <wd@pollux.denx.de>
59107 Date: Sat Oct 28 02:29:44 2006 +0200
59111 commit 2751a95abd1b96911081c357e96a12fa97b40dee
59112 Author: Wolfgang Denk <wd@pollux.denx.de>
59113 Date: Sat Oct 28 02:29:14 2006 +0200
59115 Enable commandline editing and hush shell on all TQM boards.
59117 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
59118 Author: Wolfgang Denk <wd@pollux.denx.de>
59119 Date: Sat Oct 28 02:28:02 2006 +0200
59121 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
59123 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
59124 Author: Wolfgang Denk <wd@denx.de>
59125 Date: Sat Oct 28 01:14:32 2006 +0200
59127 Check for illegal character '=' in environment variable names.
59129 Make sure the string passed as variable name does not contain a '='
59130 character. This not only prevents the common error or typing
59131 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
59132 also closes a backdoor which allowed to delete write-protected
59133 environment variables, for example by using "setenv ethaddr=".
59135 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
59136 Author: Wolfgang Denk <wd@pollux.denx.de>
59137 Date: Sat Oct 28 00:38:39 2006 +0200
59139 Minor code cleanup.
59141 commit e11887a77d81077416a2d1c5e0354916fee8c034
59142 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
59143 Date: Thu Oct 26 17:55:31 2006 +0200
59145 Don't pass any debug options directly to the assembler
59147 When passing the -g option to gcc, gcc automatically selects a
59148 suitable --g<format> option to pass on to the assembler.
59149 Thus, there's no point in forcing a specific debug option on the
59150 assembler using the -Wa mechanism.
59152 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
59154 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
59155 Author: Jon Loeliger <jdl@freescale.com>
59156 Date: Fri Oct 27 07:47:22 2006 -0500
59158 MPC86xx: Cleaned up unused and conditionally used local variables.
59160 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59162 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
59163 Author: Wolfgang Denk <wd@pollux.denx.de>
59164 Date: Fri Oct 27 11:55:21 2006 +0200
59166 Fix "ar" flags in some Makefiles to allow for silent "make -s"
59168 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
59169 Author: Ben Warren <bwarren@qstreams.com>
59170 Date: Thu Oct 26 14:38:25 2006 -0400
59172 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
59173 to a TSEC (e.g. a switch is connected via RMII) or
59174 if the PHY is defective/incorrectly configured.
59176 Signed-off-by: Ben Warren <bwarren@qstreams.com>
59178 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
59179 Author: Ben Warren <bwarren@qstreams.com>
59180 Date: Thu Oct 26 14:38:25 2006 -0400
59182 Fix TSEC driver: avoid crashes if PHY is not attached
59183 to a TSEC (e.g. a switch is connected via RMII) or
59184 if the PHY is defective/incorrectly configured.
59186 Signed-off-by: Ben Warren <bwarren@qstreams.com>
59188 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
59189 Author: Wolfgang Denk <wd@pollux.denx.de>
59190 Date: Thu Oct 26 16:24:31 2006 +0200
59194 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
59195 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
59196 Date: Wed Oct 25 15:48:59 2006 +0200
59198 Finish up support for the ATSTK1000/ATSTK1002 boards
59200 Add atstk1002_config target to Makefile and move the AVR32 section
59201 down below Blackfin so that it doesn't end up in the middle of
59204 Drop the autogenerated linker script thing for now. Will have to
59205 revisit how to handle chips with different flash and RAM layout
59208 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
59210 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
59211 Author: Kumar Gala <galak@kernel.crashing.org>
59212 Date: Tue Oct 24 23:47:37 2006 -0500
59214 Added support for Multi-Image files that contain a device tree
59216 If a Multi-Image file contains a third image we try to use it as a
59217 device tree. The device tree image is assumed to be uncompressed in the
59218 image file. We automatically allocate space for the device tree in memory
59219 and provide an 8k pad to allow more than a reasonable amount of growth.
59221 Additionally, a device tree that was contained in flash will now automatically
59222 get copied to system memory as part of boot. Previously an error was
59223 reported if one tried to boot a device tree that was in flash.
59225 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
59227 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
59228 Author: Wolfgang Denk <wd@denx.de>
59229 Date: Tue Oct 24 21:35:55 2006 +0200
59231 Switch to automatically generated CHANGELOG file.
59232 (use "make CHANGELOG" to update it from time to time)
59234 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
59235 Author: Stefan Roese <sr@denx.de>
59236 Date: Tue Oct 24 18:06:48 2006 +0200
59238 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
59239 Patch by Stefan Roese, 24 Oct 2006
59241 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
59242 Author: Wolfgang Denk <wd@pollux.denx.de>
59243 Date: Tue Oct 24 17:24:55 2006 +0200
59245 Merge with /home/wd/git/u-boot/master
59247 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
59248 Author: Wolfgang Denk <wd@pollux.denx.de>
59249 Date: Tue Oct 24 15:32:57 2006 +0200
59253 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
59254 Author: Wolfgang Denk <wd@pollux.denx.de>
59255 Date: Tue Oct 24 14:51:36 2006 +0200
59257 Move atstk1000 files into vendor specific directory.
59258 Patch by Haavard Skinnemoen, 12 Sep 2006
59260 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
59261 Author: Wolfgang Denk <wd@pollux.denx.de>
59262 Date: Tue Oct 24 14:42:37 2006 +0200
59264 Add ATSTK1000 and ATSTK1002 board support
59265 Patch by Haavard Skinnemoen, 06 Sep 2006
59267 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
59270 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
59271 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
59272 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
59273 CompactFlash cards. For more information, please see this page:
59275 http://www.atmel.com/dyn/products/tools.asp?family_id=682
59277 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
59280 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
59282 commit f93ae788c3640fcde5db383471d45548ff4060d0
59283 Author: Wolfgang Denk <wd@pollux.denx.de>
59284 Date: Tue Oct 24 14:31:24 2006 +0200
59286 Add common serial driver for Atmel AT32 and AT91 chips
59287 Patch by Haavard Skinnemoen, 06 Sep 2006
59289 This is a first attempt at creating a common serial driver for Atmel
59290 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
59291 be possible to support AT91RM9200 and other ARM-based chips with some
59292 minor modifications.
59294 There's nothing fundamentally AVR32-specific in this driver, but it
59295 does use some features which are currently only defined for the
59297 * pm_get_clock_freq: Obtain the clock frequency of a given domain
59298 * gd->console_uart: A "struct device" containing information about
59299 register mappings, gpio resources and clocks associated with the
59302 For more information about these features, please see the "AT32AP
59305 commit 72a087e04705c26cad982879ebd06b5281bf825a
59306 Author: Wolfgang Denk <wd@pollux.denx.de>
59307 Date: Tue Oct 24 14:27:35 2006 +0200
59309 Add AT32AP CPU and AT32AP7000 SoC support
59310 Patch by Haavard Skinnemoen, 06 Sep 2006
59312 This patch adds support for the AT32AP CPU family and the AT32AP7000
59313 chip, which is the first chip implementing the AVR32 architecture.
59315 The AT32AP CPU core is a high-performance implementation featuring a
59316 7-stage pipeline, separate instruction- and data caches, and a MMU.
59317 For more information, please see the "AVR32 AP Technical Reference":
59319 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
59321 In addition to this, the AT32AP7000 chip comes with a large set of
59322 integrated peripherals, many of which are shared with the AT91 series
59323 of ARM-based microcontrollers from Atmel. Full data sheet is
59326 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
59328 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
59330 commit 7b64fef33c66be648826c0ff9758298ef13d0604
59331 Author: Wolfgang Denk <wd@pollux.denx.de>
59332 Date: Tue Oct 24 14:21:16 2006 +0200
59334 Add AVR32 architecture support
59335 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
59337 This patch adds common infrastructure code for the Atmel AVR32
59338 architecture. See doc/README.AVR32 for details.
59340 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
59342 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
59343 Author: Wolfgang Denk <wd@pollux.denx.de>
59344 Date: Tue Oct 24 13:57:33 2006 +0200
59346 Use -g instead of -gstabs in AFLAGS_DEBUG
59347 Patch by Haavard Skinnemoen, 30 Aug 2006
59349 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
59350 matter what the target's preferred debugging format is. This patch
59351 simply replaces -gstabs with -g, so that the default debugging format
59352 for the architecture is used.
59354 commit 965829872169c2996023840d98e1d85ad148d629
59355 Author: Wolfgang Denk <wd@pollux.denx.de>
59356 Date: Tue Oct 24 13:55:18 2006 +0200
59358 Fix/workaround broken dependency handling with make 3.81
59359 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
59361 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
59362 Author: Marian Balakowicz <m8@semihalf.com>
59363 Date: Mon Oct 23 22:17:05 2006 +0200
59365 Fix sequoia separate object direcory building problems.
59367 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
59368 Author: Jon Loeliger <jdl@freescale.com>
59369 Date: Fri Oct 20 17:16:35 2006 -0500
59371 Use generic I2C register block on 85xx and 86xx.
59373 Replace private IMMAP I2C structures with generic reg block
59374 and allow 86xx to have multiple I2C device busses.
59376 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59378 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
59379 Author: Jon Loeliger <jdl@freescale.com>
59380 Date: Fri Oct 20 15:54:34 2006 -0500
59382 Fix compilation warnings on a few 85xx boards.
59384 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59386 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
59387 Author: Jon Loeliger <jdl@freescale.com>
59388 Date: Fri Oct 20 15:50:15 2006 -0500
59390 Converted all 85xx boards to use a common FSL I2C driver.
59391 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
59392 And removed hard i2c path from a few u-boot.lds scipts too.
59393 Minor whitespace cleanups along the way.
59395 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59397 commit 4d45f69e362b05892c9e92a7907e5820995612aa
59398 Author: Jon Loeliger <jdl@freescale.com>
59399 Date: Thu Oct 19 12:02:24 2006 -0500
59401 Rewrite a series of goto statements as a sequences of
59402 conditional expressions instead.
59404 Use consistent return code 0/-1 for good/bad indicators.
59406 Include one fewer file if the driver isn't used at all.
59408 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59410 commit 7237c033b02fe295880435f1eb80819a0c987532
59411 Author: Jon Loeliger <jdl@freescale.com>
59412 Date: Thu Oct 19 11:02:16 2006 -0500
59414 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
59416 in an effort to begin to unify the umpteen FSL I2C drivers that
59417 are all otherwise very similar.
59419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59421 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
59422 Author: Jon Loeliger <jdl@freescale.com>
59423 Date: Thu Oct 19 11:33:52 2006 -0500
59425 * Fix a bunch of compiler warnings for gcc 4.0
59427 Signed-off-by: Matthew McClintock <msm@freescale.com>
59429 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
59430 Author: Stefan Roese <sr@denx.de>
59431 Date: Tue Oct 17 06:14:31 2006 +0200
59433 Add monitor functions for indirect access to PPC440 DCR's
59434 Patch by Leonid Baryudin, 12 Oct 2006
59436 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
59437 Author: Jon Loeliger <jdl@freescale.com>
59438 Date: Fri Oct 13 16:47:53 2006 -0500
59440 Fixed leading whitespace issues.
59441 Removed spurious LAWAR thing.
59443 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59445 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
59446 Author: Jon Loeliger <jdl@freescale.com>
59447 Date: Thu Oct 12 10:42:36 2006 -0500
59449 Remove unneeded include files and local variable.
59451 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59453 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
59454 Author: Grant Likely <grant.likely@secretlab.ca>
59455 Date: Tue Oct 10 00:23:32 2006 -0600
59457 Fix possible uninitialized variable compiler warning.
59459 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
59460 do_bootm_linux() may be uninitialized. There is no possibility in the
59461 current code that len will get used uninitialized, but this fix follows
59462 the existing convention of setting both len and data to zero at the same
59465 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
59467 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
59468 Author: Matthew McClintock <msm@freescale.com>
59469 Date: Wed Oct 11 15:13:01 2006 -0500
59471 * Fix a bunch of compiler warnings for gcc 4.0
59473 Signed-off-by: Matthew McClintock <msm@freescale.com>
59475 commit bf651baa365e5447246aad6a633ccd667cf24a39
59476 Author: Jon Loeliger <jdl@freescale.com>
59477 Date: Wed Oct 11 10:10:43 2006 -0500
59479 Move "ar" flags to config.mk to allow for silent "make -s"
59481 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
59482 Author: Jon Loeliger <jdl@freescale.com>
59483 Date: Tue Oct 10 17:19:03 2006 -0500
59485 Coding style changes to remove local varible blocks
59486 and reformat a bit nicer.
59488 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
59489 Author: Jon Loeliger <jdl@freescale.com>
59490 Date: Tue Oct 10 17:16:04 2006 -0500
59492 Fix whitespace issues.
59494 commit 7b382b7125f2397cce63253df62f183e3dfa2770
59495 Author: Jon Loeliger <jdl@freescale.com>
59496 Date: Tue Oct 10 17:14:45 2006 -0500
59498 Fix whitespace issues.
59500 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
59501 Author: Jon Loeliger <jdl@freescale.com>
59502 Date: Tue Oct 10 17:06:53 2006 -0500
59504 Fix whitespace issues.
59506 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
59507 Author: Jon Loeliger <jdl@freescale.com>
59508 Date: Tue Oct 10 17:03:43 2006 -0500
59510 Ran lindent and cleaned up whitespace issues.
59511 Format for 80-columns too.
59513 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
59514 Author: Jon Loeliger <jdl@freescale.com>
59515 Date: Tue Oct 10 17:02:22 2006 -0500
59517 Fix whitespace and 80-col issues.
59519 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
59520 Author: Stefan Roese <sr@denx.de>
59521 Date: Sat Oct 7 11:36:51 2006 +0200
59523 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
59524 Patch by Stefan Roese, 07 Oct 2006
59526 commit 5bc528fa4da751d472397b308137238a6465afd2
59527 Author: Stefan Roese <sr@denx.de>
59528 Date: Sat Oct 7 11:35:25 2006 +0200
59530 Update ALPR code (NAND support working now)
59531 Patch by Stefan Roese, 07 Oct 2006
59533 commit 77d5034847d328753b80c46b83f960a14a26f40e
59534 Author: Stefan Roese <sr@denx.de>
59535 Date: Sat Oct 7 11:33:03 2006 +0200
59537 Remove compile warnings in fpga code
59538 Patch by Stefan Roese, 07 Oct 2006
59540 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
59541 Author: Stefan Roese <sr@denx.de>
59542 Date: Sat Oct 7 11:30:52 2006 +0200
59544 Add CONFIG_BOARD_RESET to configure board specific reset function
59545 Patch by Stefan Roese, 07 Oct 2006
59547 commit f55df18187e7a45cb73fec4370d12135e6691ae1
59548 Author: John Traill <john.traill@freescale.com>
59549 Date: Fri Sep 29 08:23:12 2006 +0100
59551 Fix missing tCycle/modfreq calculation.
59553 Signed-off-by: John Traill <john.traill@freescale.com>
59555 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
59556 Author: Andy Fleming <afleming@freescale.com>
59557 Date: Wed Sep 13 10:33:35 2006 -0500
59559 Updated config headers to add default FDT-based booting
59561 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
59562 Author: Andy Fleming <afleming@freescale.com>
59563 Date: Wed Sep 13 10:34:18 2006 -0500
59565 Add support for eTSEC 3 & 4 on 8548 CDS
59567 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
59568 This will only work on rev 1.3 boards (but doesn't break older boards)
59569 * Cleaned up some comments to reflect the expanded role of tsec
59572 commit 084d648b109c8984f83674043c1a7fa3885ef801
59573 Author: Andy Fleming <afleming@freescale.com>
59574 Date: Wed Sep 13 10:33:56 2006 -0500
59576 Added code to support 2.6.18 PCI changes in u-boot
59578 * Added code to swizzle the IRQ map for the PCI
59580 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
59581 Author: Jon Loeliger <jdl@freescale.com>
59582 Date: Tue Sep 19 09:34:10 2006 -0500
59584 Modified makefile for new build mechanism.
59586 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59588 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
59589 Author: Jon Loeliger <jdl@freescale.com>
59590 Date: Thu Sep 14 08:40:36 2006 -0500
59592 Handle 86xx SVR values according to the new Reference Manual.
59593 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
59594 by the byte in bits 16-23 instead.
59595 Thanks to Jason Jin for noticing.
59597 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59599 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
59600 Author: Zhang Wei <wei.zhang@freescale.com>
59601 Date: Mon Aug 28 14:25:31 2006 +0800
59603 Fixed an OF-tree off-by-one bug when adding a new property name.
59604 This bug will cause the kernel booting to pause a long time.
59606 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
59607 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
59609 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
59610 Author: Jon Loeliger <jdl@freescale.com>
59611 Date: Tue Aug 29 11:05:09 2006 -0500
59613 Remove trailing empty lines.
59615 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
59616 Author: Jon Loeliger <jdl@freescale.com>
59617 Date: Tue Aug 29 09:48:49 2006 -0500
59619 Remove bogus msync and use volatile asm.
59621 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
59622 Author: Jon Loeliger <jdl@freescale.com>
59623 Date: Tue Aug 29 08:17:14 2006 -0500
59625 Add myself as maintainer for MPC8641HPCN.
59627 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
59628 Author: Zhang Wei <wei.zhang@freescale.com>
59629 Date: Mon Aug 28 14:25:31 2006 +0800
59631 Fixed an OF-tree off-by-one bug when adding a new property name.
59632 This bug will cause the kernel booting to pause a long time.
59634 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
59636 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
59637 Author: Haiying Wang <haiying.wang@freescale.com>
59638 Date: Fri Aug 25 14:38:34 2006 -0400
59640 Change ramdiskaddr and dtbaddr
59641 Remove PEX fluff commands.
59643 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
59644 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59646 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
59647 Author: Matthew McClintock <msm@freescale.com>
59648 Date: Wed Aug 23 13:32:45 2006 -0500
59650 * Another small fix for booting with disable_of
59652 Signed-off-by: Matthew McClintock <msm@freescale.com>
59654 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
59655 Author: Jon Loeliger <jdl@freescale.com>
59656 Date: Wed Aug 23 11:04:43 2006 -0500
59658 Cleanup and lindent new AHCI driver.
59660 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
59661 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
59662 Date: Wed Aug 23 19:15:12 2006 +0800
59664 Add AHCI define and sata support for MPC8641HPCN board.
59666 Signed-off-by:Jason Jin<jason.jin@freescale.com>
59668 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
59669 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
59670 Date: Wed Aug 23 19:10:44 2006 +0800
59672 Add AHCI support to u-boot
59674 Add AHCI support in u-boot, enable the sata disk controllers which
59675 following the AHCI protocol.
59677 Signed-off-by:Jason Jin<jason.jin@freescale.com>
59679 commit d8ea2acf5f137cae99417df4f573d036ee384668
59680 Author: Zhang Wei <wei.zhang@freescale.com>
59681 Date: Wed Aug 23 17:54:32 2006 +0800
59683 Add dtb boot-up parameter to default boot commands.
59685 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
59687 commit b93775c2036b99baa390ea425c4771895bbc63c4
59688 Author: Jon Loeliger <jdl@freescale.com>
59689 Date: Tue Aug 22 18:26:08 2006 -0500
59691 Cleanup even more poorly introduced whitespace.
59693 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
59694 Author: Jon Loeliger <jdl@freescale.com>
59695 Date: Tue Aug 22 18:07:00 2006 -0500
59697 Cleanup more poorly introduced whitespace.
59699 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
59700 Author: Jon Loeliger <jdl@freescale.com>
59701 Date: Tue Aug 22 17:54:05 2006 -0500
59703 Cleanup poorly introduced whitespace.
59705 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
59706 Author: Jon Loeliger <jdl@freescale.com>
59707 Date: Tue Aug 22 12:25:27 2006 -0500
59709 General indent and whitespace cleanups.
59711 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
59712 Author: Jon Loeliger <jdl@freescale.com>
59713 Date: Tue Aug 22 12:06:18 2006 -0500
59715 General indent and whitespace cleanups.
59717 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
59718 Author: Jon Loeliger <jdl@freescale.com>
59719 Date: Tue Aug 22 10:42:21 2006 -0500
59721 Cleanup compiler warnings.
59723 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
59724 Author: Matthew McClintock <msm@freescale.com>
59725 Date: Tue Aug 22 09:31:59 2006 -0500
59727 Fix disable_of booting
59729 Signed-off-by: Matthew McClintock <msm@freescale.com>
59731 commit 87a449c8ac396420cb24260f717ea9e6faa82047
59732 Author: Matthew McClintock <msm@freescale.com>
59733 Date: Tue Aug 22 09:23:55 2006 -0500
59735 Support for FDT in uImage format, error when using FDT from flash
59737 Signed-off-by: Matthew McClintock <msm@freescale.com>
59739 commit 75c299c38369d01addd5e054b8a16217b70f4a86
59740 Author: Haiying Wang <haiying.wang@freescale.com>
59741 Date: Tue Aug 15 15:12:55 2006 -0400
59743 Unlock cache before kernel starts up for MPC86xx
59745 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
59746 Author: Haiying Wang <haiying.wang@freescale.com>
59747 Date: Tue Aug 15 15:13:15 2006 -0400
59749 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
59751 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
59752 Author: Haiying Wang <haiying.wang@freescale.com>
59753 Date: Tue Aug 15 15:12:55 2006 -0400
59755 Unlock cache before kernel starts up for MPC86xx
59757 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
59758 Author: Haiying Wang <haiying.wang@freescale.com>
59759 Date: Tue Aug 15 15:13:15 2006 -0400
59761 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
59763 commit 86c8e17f25e972a7e272950a0735fad84e082b88
59764 Author: Matthew McClintock <msm@freescale.com>
59765 Date: Wed Aug 16 13:59:47 2006 -0500
59767 * Fix disable_of booting
59769 Signed-off-by: Matthew McClintock <msm@freescale.com>
59771 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
59772 Author: Matthew McClintock <msm@freescale.com>
59773 Date: Wed Aug 16 10:54:09 2006 -0500
59775 * Support for FDT in uImage format, error when using FDT from flash
59777 Signed-off-by: Matthew McClintock <msm@freescale.com>
59779 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
59780 Author: Stefan Roese <sr@denx.de>
59781 Date: Tue Aug 15 14:22:35 2006 +0200
59783 Add initial support for the ALPR board from Prodrive
59784 NAND needs some additional testing
59785 Patch by Heiko Schocher, 15 Aug 2006
59787 commit f0ff4692ff3372dec55074a8eb444943ab095abb
59788 Author: Stefan Roese <sr@denx.de>
59789 Date: Tue Aug 15 14:15:51 2006 +0200
59791 Add FPGA Altera Cyclone 2 support
59792 Patch by Heiko Schocher, 15 Aug 2006
59794 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
59795 Author: Jon Loeliger <jdl@freescale.com>
59796 Date: Mon Aug 14 15:33:38 2006 -0500
59798 Fix BAT0 to actually be cacheable, non-guarded as documented.
59800 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59802 commit 40bc83559db5745681909fd7382ae509567e116d
59803 Author: Jon Loeliger <jdl@freescale.com>
59804 Date: Wed Aug 9 15:32:16 2006 -0500
59806 Removed MPC8641HPCN DTS source file from build.
59807 It is no longer linked into U-Boot; its sources are
59808 now located in the kernel tree.
59810 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59812 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
59813 Author: Matthew McClintock <msm@freescale.com>
59814 Date: Wed Jun 28 10:47:03 2006 -0500
59816 * Switched default PCI speed for 8540 ADS back to 33MHz
59818 * Added comments and a printf to warn that PCI-X won't
59820 Patch by Andy Fleming 17-Mar-2006
59822 Signed-off-by: Andy Fleming <afleming@freescale.com>
59824 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
59825 Author: Matthew McClintock <msm@freescale.com>
59826 Date: Wed Jun 28 10:46:35 2006 -0500
59828 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
59830 Signed-off-by: Andy Fleming <afleming@freescale.com>
59832 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
59833 Author: Matthew McClintock <msm@freescale.com>
59834 Date: Wed Jun 28 10:46:13 2006 -0500
59836 * Added VIA configuration table
59838 * Added support for PCI2 on CDS
59839 Patch by Andy Fleming 17-Mar-2006
59841 Signed-off-by: Andy Fleming <afleming@freescale.com>
59843 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
59844 Author: Matthew McClintock <msm@freescale.com>
59845 Date: Wed Jun 28 10:45:41 2006 -0500
59847 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
59849 Signed-off-by: Andy Fleming <afleming@freescale.com>
59851 commit 97074ed9655309b64231bc2cee69fe85399f8055
59852 Author: Matthew McClintock <msm@freescale.com>
59853 Date: Wed Jun 28 10:45:17 2006 -0500
59855 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
59857 Signed-off-by: Andy Fleming <afleming@freescale.com>
59859 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
59860 Author: Matthew McClintock <msm@freescale.com>
59861 Date: Wed Jun 28 10:44:49 2006 -0500
59863 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
59865 Signed-off-by: Andy Fleming <afleming@freescale.com>
59867 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
59868 Author: Matthew McClintock <msm@freescale.com>
59869 Date: Wed Jun 28 10:44:23 2006 -0500
59871 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
59873 Signed-off-by: Andy Fleming <afleming@freescale.com>
59875 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
59876 Author: Matthew McClintock <msm@freescale.com>
59877 Date: Wed Jun 28 10:43:36 2006 -0500
59879 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
59881 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59883 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
59884 Author: Matthew McClintock <msm@freescale.com>
59885 Date: Wed Jun 28 10:43:00 2006 -0500
59887 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
59889 commit 5498d90312aad9f6bdbf047986027c35b03cd163
59890 Author: Matthew McClintock <msm@freescale.com>
59891 Date: Wed Jun 28 10:42:24 2006 -0500
59893 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
59895 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
59896 Author: Matthew McClintock <msm@freescale.com>
59897 Date: Wed Jun 28 10:41:37 2006 -0500
59899 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
59901 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
59902 Author: John Traill <john.traill@freescale.com>
59903 Date: Wed Aug 9 14:33:50 2006 +0100
59905 Add Rapidio support for the MPC8641HPCN
59907 Signed-off-by: John Traill <john.traill@freescale.com>
59909 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
59910 Author: John Traill <john.traill@freescale.com>
59911 Date: Tue Aug 8 11:32:43 2006 +0100
59913 Fix caslat calculation
59915 Signed-off-by: John Traill <john.traill@freescale.com>
59917 commit 709d3073e74153278e7904a70819bbef7df50e1a
59918 Author: Jon Loeliger <jdl@freescale.com>
59919 Date: Thu Aug 3 16:17:56 2006 -0500
59921 Convert to mac-address in ethernet nodes.
59923 commit 71748af833ca1017edf1415be376366ff2937d17
59924 Author: Haiying Wang <haiying.wang@freescale.com>
59925 Date: Fri Jul 28 12:41:35 2006 -0400
59927 Correct the irq value of DUART2
59929 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
59930 Author: Haiying Wang <haiying.wang@freescale.com>
59931 Date: Fri Jul 28 12:41:41 2006 -0400
59933 Change the space size of PEX IO in README
59935 commit 239db37c94f7a92941c4465feceb867c609241c5
59936 Author: Haiying Wang <haiying.wang@freescale.com>
59937 Date: Fri Jul 28 12:41:18 2006 -0400
59939 Move get_board_sys_clk to board directory
59941 commit 492900b985439fbce1a118afde1e35def870db03
59942 Author: John Traill <john.traill@freescale.com>
59943 Date: Fri Jul 28 09:03:54 2006 +0100
59945 Fix 8641HPCN pollution
59947 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
59948 Author: John Traill <john.traill@freescale.com>
59949 Date: Fri Jul 28 08:16:06 2006 +0100
59951 Fix 8641HPCN timebase
59953 commit c86360b830f1eecd7a72208575dde4f57879faea
59954 Author: Zhang Wei <wei.zhang@freescale.com>
59955 Date: Fri Jul 28 00:01:34 2006 +0800
59957 Fixed OF device tree of mpc86xxhpcn board.
59959 The changes works in with kernel irq mapping rework.
59961 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
59963 commit bea3f28d285942bf3f7ab339ce85178ded544225
59964 Author: Haiying Wang <haiying.wang@freescale.com>
59965 Date: Wed Jul 12 10:48:05 2006 -0400
59967 Add support for reading and writing mac addresses to or from ID EEPROM.
59969 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
59970 With attached patch, we can use command "mac/mac read/mac save/"
59971 to read and write EEPROM under u-boot prompt.
59973 U-boot will calculate the checksum of EEPROM while bootup,
59974 if it is right, then u-boot will check whether the mac address
59975 of eTSEC0/1/2/3 is availalbe (non-zero).
59977 If there is mac address availabe in EEPROM, u-boot will use it,
59978 otherewise, u-boot will use the mac address defined in
59979 MPC8641HPCN.h. This matches the requirement to set unique mac address
59980 for each TSEC port.
59982 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
59983 Signed-off-by: York Sun <yorksun@freescale.com>
59985 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
59986 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
59987 Date: Thu Jul 13 10:35:10 2006 -0500
59989 Fixed initrd issue by define big RAM
59991 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
59993 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
59994 Author: Jason Jin <Jason.jin@freescale.com>
59995 Date: Fri Jul 7 10:01:45 2006 -0500
59997 We made a u-boot patch to fix the hang up issue
59998 when booting filesystem from ramdisk.
60000 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
60002 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
60003 Author: Matthew McClintock <msm@freescale.com>
60004 Date: Wed Jun 28 10:47:03 2006 -0500
60006 * Switched default PCI speed for 8540 ADS back to 33MHz
60007 * Added comments and a printf to warn that PCI-X won't
60009 Patch by Andy Fleming 17-Mar-2006
60011 Signed-off-by: Andy Fleming <afleming@freescale.com>
60013 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
60014 Author: Matthew McClintock <msm@freescale.com>
60015 Date: Wed Jun 28 10:46:35 2006 -0500
60017 * Fixed a bug where 8555 PCI code used the old variable and
60019 Patch by Andy Fleming 17-Mar-2006
60021 Signed-off-by: Andy Fleming <afleming@freescale.com>
60023 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
60024 Author: Matthew McClintock <msm@freescale.com>
60025 Date: Wed Jun 28 10:46:13 2006 -0500
60027 * Added VIA configuration table
60028 * Added support for PCI2 on CDS
60029 Patch by Andy Fleming 17-Mar-2006
60031 Signed-off-by: Andy Fleming <afleming@freescale.com>
60033 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
60034 Author: Matthew McClintock <msm@freescale.com>
60035 Date: Wed Jun 28 10:45:41 2006 -0500
60037 * Fixed PCI memory definitions
60038 Patch by Andy Fleming 17-Mar-2006
60040 Signed-off-by: Andy Fleming <afleming@freescale.com>
60042 commit 087454609e47295443af793a282cddcd91a5f49c
60043 Author: Matthew McClintock <msm@freescale.com>
60044 Date: Wed Jun 28 10:45:17 2006 -0500
60046 * Added support for initializing second PCI bus on 85xx
60047 Patch by Andy Fleming 17-Mar-2006
60049 Signed-off-by: Andy Fleming <afleming@freescale.com>
60051 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
60052 Author: Matthew McClintock <msm@freescale.com>
60053 Date: Wed Jun 28 10:44:49 2006 -0500
60055 * Added PCI-X #defines for PCI-X initialization
60056 Patch by Andy Fleming on 17-Mar-2006
60058 Signed-off-by: Andy Fleming <afleming@freescale.com>
60060 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
60061 Author: Matthew McClintock <msm@freescale.com>
60062 Date: Wed Jun 28 10:44:23 2006 -0500
60064 * Made sure the code which disables prefetch for PCI devices
60065 sets the size of the prefetch region to 0
60066 Patch by Andy Fleming on 17-Mar-2006
60068 Signed-off-by: Andy Fleming <afleming@freescale.com>
60070 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
60071 Author: Matthew McClintock <msm@freescale.com>
60072 Date: Wed Jun 28 10:43:36 2006 -0500
60074 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
60075 Patch by Jon Loeliger 17-Jan-2006
60077 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60079 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
60080 Author: Matthew McClintock <msm@freescale.com>
60081 Date: Wed Jun 28 10:43:00 2006 -0500
60083 * Removed the oftree.dts for stxxtx in light of the changes
60084 to the flat device tree handling code
60085 Patch by Matthew McClintock 26-June-2006
60087 commit 1b380ec225665e73959677f3893dc658c5925e05
60088 Author: Matthew McClintock <msm@freescale.com>
60089 Date: Wed Jun 28 10:42:24 2006 -0500
60091 * Patch to modify ft_build.c to update flat device trees in place
60092 Patch by Matthew McClintock 26-June-2006
60094 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
60095 Author: Matthew McClintock <msm@freescale.com>
60096 Date: Wed Jun 28 10:41:37 2006 -0500
60098 * Modify bootm command to support booting with flat device trees
60099 Patch by Matthew McClintock 26-June-2006
60101 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
60102 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
60103 Date: Wed Jun 28 08:43:56 2006 -0500
60105 Change Id to symbolic name for RTL8139
60107 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
60109 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
60110 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
60111 Date: Tue Jun 27 18:12:10 2006 +0800
60113 Fix RTL8139 in big endian
60115 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
60116 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
60118 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
60119 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
60120 Date: Tue Jun 27 18:12:23 2006 +0800
60122 Fix Tsec bug when no link
60124 When tftp a non-exist file from the tftp server, u-boot will check
60125 the link of all eth port. The original file will return wrong link
60126 state on the no link ports.
60128 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
60130 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
60131 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
60132 Date: Tue Jun 27 18:12:02 2006 +0800
60134 Fix bug for io_bar size during pci scan
60136 During the pci scan process, Some devices return bar_reponse with the
60137 highest bytes 0, such as the pci bridge in uli1575 return bar_response
60138 with 0xffffff, So the bar_size should be manually set under 64K.
60140 Signed-off-by: Jason Jin <jason.jin@freescale.com>
60142 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
60143 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
60144 Date: Tue Jun 27 18:11:54 2006 +0800
60146 Enable PCIE1 for MPC8641HPCN board
60148 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
60150 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
60151 Author: Wolfgang Denk <wd@pollux.denx.de>
60152 Date: Mon Jun 26 11:06:00 2006 +0200
60156 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
60157 Author: Jon Loeliger <jdl@freescale.com>
60158 Date: Thu Jun 22 08:51:46 2006 -0500
60160 Fix bug in 8641hpcn reset command with no args.
60162 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
60163 Acked-by: Jon Loeliger <jdl@freescale.com>
60165 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
60166 Author: Zhang Wei <wei.zhang@freescale.com>
60167 Date: Tue Jun 20 17:47:15 2006 +0800
60169 Reworked IRQ mapping in OF-tree.
60171 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
60172 Author: Jon Loeliger <jdl@freescale.com>
60173 Date: Thu Jun 15 21:33:37 2006 -0500
60175 Do not enable address translation on secondary CPUs.
60176 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
60178 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60180 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
60181 Author: Wolfgang Denk <wd@pollux.denx.de>
60182 Date: Wed Jun 14 18:14:56 2006 +0200
60186 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
60187 Author: Wolfgang Denk <wd@pollux.denx.de>
60188 Date: Wed Jun 14 17:45:53 2006 +0200
60190 Various USB related patches
60191 - Add support for mpc8xx USB device.
60192 - Add support for Common Device Class - Abstract Control Model USB console.
60193 - Add support for flow control in USB slave devices.
60194 - Add support for switching between gserial and cdc_acm using environment.
60195 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
60196 - Update usbcore slightly to ease host enumeration.
60197 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
60198 - Add AdderUSB_config as a defconfig to enable usage of the USB console
60199 by default with the Adder87x U-Boot port.
60200 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
60202 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
60203 Author: Jon Loeliger <jdl@jdl.com>
60204 Date: Wed Jun 7 10:53:55 2006 -0500
60206 Fix a get_board_sys_clk() use-before-def warning.
60208 Signed-off-by: Jon Loeliger <jdl@jdl.com>
60210 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
60211 Author: Jon Loeliger <jdl@jdl.com>
60212 Date: Wed Jun 7 10:52:49 2006 -0500
60214 Allow DTC path to be passed in.
60216 Signed-off-by: Jon Loeliger <jdl@jdl.com>
60218 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
60219 Author: Haiying Wang <haiying.wang@freescale.com>
60220 Date: Tue Jun 6 16:54:29 2006 -0400
60222 Modify the IRQ of DUART2
60224 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
60225 Author: Jon Loeliger <jdl@jdl.com>
60226 Date: Wed May 31 13:55:35 2006 -0500
60230 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60232 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
60233 Author: Jon Loeliger <jdl@jdl.com>
60234 Date: Wed May 31 12:44:44 2006 -0500
60236 White space cleanup.
60237 Some 80-column cleanups.
60238 Convert printf() to puts() where possible.
60239 Use #include "spd_sdram.h" as needed.
60240 Enhanced reset command usage message a bit.
60242 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60244 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
60245 Author: Jon Loeliger <jdl@jdl.com>
60246 Date: Wed May 31 11:39:34 2006 -0500
60248 Removed unneeded local_bus_init() from 8641HPCN board.
60250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60252 commit 4d3d729c16c392d2982d3266b659d333c927697d
60253 Author: Jon Loeliger <jdl@jdl.com>
60254 Date: Wed May 31 11:24:28 2006 -0500
60256 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
60258 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60260 commit b2a941de060350ad15878d8219825f4950e9bb8e
60261 Author: Jon Loeliger <jdl@jdl.com>
60262 Date: Wed May 31 10:07:28 2006 -0500
60264 Remove dead debug code.
60266 Signed-off-by: Jon Loeliger <jdl@jdl.com>
60268 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
60269 Author: Jon Loeliger <jdl@freescale.com>
60270 Date: Tue May 30 17:47:00 2006 -0500
60272 Move mpc86xx PIXIS code to board directory
60274 First cut at moving the PIXIS platform code out of
60275 the 86xx cpu directory and into board/mpc8641hpcn
60278 Signed-off-by: Jon Loeliger <jdl@freescale.com>
60280 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
60281 Author: Markus Klotzbuecher <mk@denx.de>
60282 Date: Tue May 30 16:56:14 2006 +0200
60284 Support generic OHCI support for the s3c24x0 cpu.
60286 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
60287 Author: Haiying Wang <Haiying.Wang@freescale.com>
60288 Date: Tue May 30 09:10:32 2006 -0500
60290 Improve "reset" command's interaction with watchdog.
60292 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
60293 "reset altbank wd" will reset another bank WITH watch dog enabled
60294 "diswd" will disable watch dog after u-boot boots up successfully
60296 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
60298 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
60299 Author: Haiying Wang <Haiying.Wang@freescale.com>
60300 Date: Tue May 30 08:51:19 2006 -0500
60302 Fix two SDRAM setup bugs.
60305 Enable 1T/2T based on number of DIMMs present.
60307 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
60309 commit d11fec5015334deb2010e36ce00bb118cc5429a5
60310 Author: Haiying Wang <Haiying.Wang@freescale.com>
60311 Date: Fri May 26 10:24:48 2006 -0500
60313 Add first draft of the MPC8641HPCN doc/README.
60315 Signed-off-by: Jon Loeliger <jdl@jdl.com>
60317 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
60318 Author: Haiying Wang <Haiying.Wang@freescale.com>
60319 Date: Fri May 26 10:13:04 2006 -0500
60321 Added pci@8000 block.
60322 Updated ethernet interrupt mappings (moved up 48).
60323 Cleaned up a few comments.
60325 Signed-off-by: Jon Loeliger <jdl@jdl.com>
60327 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
60328 Author: Haiying Wang <Haiying.Wang@freescale.com>
60329 Date: Fri May 26 10:01:16 2006 -0500
60331 Allow args on reset command.
60333 Signed-off-by: Jon Loeliger <jdl@jdl.com>
60335 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
60336 Author: Markus Klotzbuecher <mk@denx.de>
60337 Date: Tue May 23 13:38:35 2006 +0200
60339 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
60340 fixes to the latter.
60342 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
60343 Author: Markus Klotzbuecher <mk@denx.de>
60344 Date: Tue May 23 10:33:11 2006 +0200
60346 More cleanup for the delta board and the generic usb_ohci driver. Added
60347 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
60348 initialization and cleanup hooks respectively.
60350 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
60351 Author: Markus Klotzbuecher <mk@denx.de>
60352 Date: Mon May 22 16:33:54 2006 +0200
60354 This patch adds USB storage support for the delta board. This is the first
60355 board to make use of a generic OHCI driver, that calls hooks for board
60356 dependant initialization.
60358 commit 14e37081ff3cac7ebe6e93836523429853b6b292
60359 Author: Jon Loeliger <jdl@jdl.com>
60360 Date: Fri May 19 13:28:39 2006 -0500
60362 Change arbitration to round-robin for SMP linux.
60364 commit 9a655876e5995be80f49054e2509500e871e4d3a
60365 Author: Jon Loeliger <jdl@jdl.com>
60366 Date: Fri May 19 13:26:34 2006 -0500
60368 Enable dual DDR controllers and interleaving.
60370 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
60371 Author: Jon Loeliger <jdl@jdl.com>
60372 Date: Fri May 19 13:22:44 2006 -0500
60374 Update 86xx address map and LAWBARs.
60376 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
60377 Author: Jon Loeliger <jdl@jdl.com>
60378 Date: Fri May 19 13:14:15 2006 -0500
60380 Remove L2 Cache invalidate polling.
60382 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
60383 Author: Jon Loeliger <jdl@jdl.com>
60384 Date: Fri May 19 12:33:09 2006 -0500
60386 Enable 2nd CPU and I2C.
60388 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
60389 Author: Jon Loeliger <jdl@freescale.com>
60390 Date: Mon May 15 07:26:56 2006 -0500
60392 Update interrupt mapping.
60394 commit 6cfea33477b04b63ed47386ed1629529484c33ba
60395 Author: Haiying Wang <Haiying.Wang@freescale.com>
60396 Date: Wed May 10 09:38:06 2006 -0500
60398 Remove unneeded INIT_RAM_LOCK cache twiddling.
60399 Correctly tracks r29 as global data pointer now.
60401 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
60403 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
60404 Author: Jon Loeliger <jdl@freescale.com>
60405 Date: Wed May 10 09:33:07 2006 -0500
60407 Remove unnecessary flash.c file.
60409 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
60410 Author: Jon Loeliger <jdl@freescale.com>
60411 Date: Tue May 9 08:23:49 2006 -0500
60413 Get MPC8641HPCN flash images working.
60415 Enable the CFI driver.
60416 Remove bogus LAWBAR7 cruft.
60417 Use correct TEXT_BASE, Fixup load script.
60418 Enable SPD EEPROM during DDR setup.
60419 Use generic RFC 1918 IP addresses by default.
60421 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
60422 Author: Jon Loeliger <jdl@freescale.com>
60423 Date: Thu Apr 27 10:15:16 2006 -0500
60425 Cleanup whitespaces and style issues.
60426 Removed //-style comments.
60427 Use 80-column lines.
60428 Remove trailing whitespace.
60429 Remove dead code and debug cruft.
60431 commit a2320a6bf8113a09544c42d160d10ac69d049a03
60432 Author: Jon Loeliger <jdl@freescale.com>
60433 Date: Thu Apr 27 08:22:39 2006 -0500
60435 Revert bad PCI prefetch limit change.
60437 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
60438 Author: Jon Loeliger <jdl@freescale.com>
60439 Date: Wed Apr 26 17:58:56 2006 -0500
60441 Initial support for MPC8641 HPCN board.