1 commit 76957cb3d621bf664311908e5962e151c633c285
2 Author: Stefan Roese <sr@denx.de>
3 Date: Sat Mar 1 12:11:40 2008 +0100
5 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
7 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
8 currently 4k/2k is configured. This patch fixes this issue.
10 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
12 Signed-off-by: Stefan Roese <sr@denx.de>
14 commit 118978c8eb43803e2794233922df4249fa278b83
15 Author: Woodruff, Richard <r-woodruff2@ti.com>
16 Date: Fri Feb 29 17:34:35 2008 -0600
18 Fix alignment error on ARM for modules
20 Fix alignment fault on ARM when running modules. With out an explicit
21 linker file gcc4.2.1 will half word align __bss_start's value. The word
22 dereference will crash hello_world.
24 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
26 commit ce1120dd703e6f12c59e4eba9962356a0300b832
27 Author: Dave Liu <r63238@freescale.com>
28 Date: Fri Feb 29 17:45:31 2008 +0800
30 fs: Fix ext2 read issue
32 The ext2 aligned process will corrupt the key
33 data struct, the patch fix this.
35 Signed-off-by: Dave Liu <daveliu@freescale.com>
37 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
38 Author: Wolfgang Denk <wd@denx.de>
39 Date: Sun Mar 2 22:45:33 2008 +0100
41 Makefile: cleanup "clean" target
43 Make sure CDPATH settings cannot interfere.
46 Signed-off-by: Wolfgang Denk <wd@denx.de>
48 commit ffda586fc1373243c9794babde69500f6293a8d8
49 Author: Li Yang <leoli@freescale.com>
50 Date: Fri Feb 29 11:46:05 2008 +0800
52 add cscope build target
54 Add cscope build target to generate cscope database for code browsing.
56 Signed-off-by: Li Yang <leoli@freescale.com>
58 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
59 Author: Kim Phillips <kim.phillips@freescale.com>
60 Date: Wed Feb 27 15:06:39 2008 -0600
62 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
64 erratum 5.6 states the autoneg completion bit is functional only if the
65 autoneg bit is asserted.
67 This fixes any secondarily-issued networking commands on non-gigabit
68 links on the mpc8360 mds board.
70 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
72 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
73 Author: John Rigby <jrigby@freescale.com>
74 Date: Tue Feb 26 09:38:14 2008 -0700
76 MPC5121e ADS PCI support take 3
78 Adds PCI support for MPC5121
80 Tested with drivers/net/rtl8139.c
82 Support is conditional since PCI on old silicon does not work.
84 ads5121_PCI_config turns on PCI
86 In this version, condition compilation of PCI code has been moved
87 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
88 suggested by Jean-Christophe PLAGNIOL-VILLARD
90 Signed-off-by: John Rigby <jrigby@freescale.com>
92 commit 44b4dbed4133f657705b7c5193209da9978243a7
93 Author: Anatolij Gustschin <agust@denx.de>
94 Date: Mon Feb 25 23:53:07 2008 +0100
96 Fix warnings while compilation of post/drivers/memory.c
98 Fix warnings while compilation with new gcc in eldk-4.2
100 Signed-off-by: Anatolij Gustschin <agust@denx.de>
102 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
103 Author: Anatolij Gustschin <agust@denx.de>
104 Date: Mon Feb 25 20:54:04 2008 +0100
106 ppc4xx: Fix problem in 4xx_enet.c driver
108 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
109 enabled. To reproduce the problem ensure that 'ethrotate'
110 environment variable isn't set to "no" and then run
111 "tftp 200000 not_existent_file".
112 This patch tries to fix the issue.
114 Signed-off-by: Anatolij Gustschin <agust@denx.de>
116 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
117 Author: Anatolij Gustschin <agust@denx.de>
118 Date: Mon Feb 25 20:04:20 2008 +0100
120 POST: Disable cache while SPR POST
122 Currently (since commit b2e2142c) u-boot crashes on
123 sequoia board while SPR test if CONFIG_4xx_DCACHE is
124 enabled. This patch disables the cache while SPR test.
126 Signed-off-by: Anatolij Gustschin <agust@denx.de>
128 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
129 Author: Martin Krause <martin.krause@tqs.de>
130 Date: Mon Feb 25 17:52:40 2008 +0100
132 TQM5200: use automatic fdt memory fixup (part 2)
134 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
135 TB5200 and TB5200_B to fixup the /memory node with the memory values
138 Signed-off-by: Martin Krause <martin.krause@tqs.de>
140 commit 44ceec253ea941b301abf4b079d52324def69d92
141 Author: Martin Krause <martin.krause@tqs.de>
142 Date: Mon Feb 25 15:17:05 2008 +0100
144 TQM5200: use automatic fdt memory fixup
146 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
147 TB5200 and TB5200_B to fixup the /memory node with the memory values
150 Signed-off-by: Martin Krause <martin.krause@tqs.de>
152 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
153 Author: Martin Krause <martin.krause@tqs.de>
154 Date: Mon Feb 25 13:27:52 2008 +0100
156 TQM5200: fix bug in SDRAM initialization code
158 This patch fixes a bug in the SDRAM initialization code for the
159 TQM5200. The hi_addr bit is now set correctly. Without this patch
160 the hi_addr bit is always set to 1, if the second SDRAM bank is
163 For other MPC5200 boards a correspondig patch has already been applied
164 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
166 Signed-off-by: Martin Krause <martin.krause@tqs.de>
168 Forget the first patch please. I confused flash with SDRAM in
171 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
172 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
173 Date: Mon Feb 25 00:03:12 2008 +0100
175 mx1fs2/flash: Fix multiple compiler warnings
177 "pointer targets in assignment differ in signedness"
179 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
181 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
182 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
183 Date: Mon Feb 25 00:03:11 2008 +0100
185 arm-imx: Fix register definitions
187 Sync register definitions with linux
189 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
191 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
193 Date: Mon Feb 25 00:03:10 2008 +0100
195 actua1/actua2/actua3: Fix multiple unused variable warnings
198 actux1.c: In function 'checkboard':
199 actux1.c:92: warning: unused variable 'revision'
202 actux2.c: In function 'checkboard':
203 actux2.c:100: warning: unused variable 's'
204 actux2.c:99: warning: unused variable 'revision'
205 actux2.c: In function 'reset_phy':
206 actux2.c:130: warning: unused variable 'i'
209 actux3.c: In function 'checkboard':
210 actux3.c:114: warning: unused variable 'revision'
212 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
214 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
215 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
216 Date: Sun Feb 24 11:44:29 2008 +0900
218 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
220 The previous patch was lacking of i386, microblaze, nios and nios2. This
221 patch tries to fix them.
223 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
225 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
226 Author: Kumar Gala <galak@kernel.crashing.org>
227 Date: Wed Feb 27 16:30:47 2008 -0600
229 85xx: Don't icbi when unlocking the cache
231 There is no reason to icbi when invalidating the temporary stack in
232 the d-cache. Its impossible on e500 to have the i-cache contain
233 any addresses in the temp stack and it can be problematic in generating
234 transactions on the bus to non-valid addresses.
236 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
238 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
239 Author: Andy Fleming <afleming@freescale.com>
240 Date: Wed Feb 27 15:50:50 2008 -0600
242 Fix source for ECM error IVPR
244 The source vector for the ECM was being set to 2,
245 but that's what the source vector for DDR was being
246 set to. Change it to 1.
248 Signed-off-by: Andy Fleming <afleming@freescale.com>
250 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
251 Author: Andy Fleming <afleming@freescale.com>
252 Date: Wed Feb 27 14:29:58 2008 -0600
254 Invalidate INIT_RAM TLB mappings
256 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
257 mappings to be unguarded. This collided with an existing "bug"
258 where the mappings for the INIT_RAM were being kept around.
259 This meant that speculative loads to those addresses were
260 succeeding in the TLB, and going out to the bus, where they
261 were causing an exception (there's nothing at that address). The
262 Flash code was coincidentally causing such a speculative load.
263 Rather than go back to mapping the INIT RAM as guarded, we fix
264 it so that the entries for the INIT_RAM are invalidated. Thus
265 the speculative loads will fail in the TLB, and have no effect.
267 Signed-off-by: Andy Fleming <afleming@freescale.com>
269 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
270 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
271 Date: Sun Feb 17 22:56:17 2008 +0100
273 sbc8548: Fix Revision reading and unused variable 'path'
275 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
277 commit 495d162374c472f46454453553382ad0735dc725
278 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
279 Date: Sun Feb 17 22:56:16 2008 +0100
281 sbc8548: Fix cfi flash bank declaration
283 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
285 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
286 Author: Jon Loeliger <jdl@freescale.com>
287 Date: Mon Feb 25 13:13:37 2008 -0600
289 86xx: Fix renamed GUR symbols in sbc8641d board.
291 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
292 (86xx: Fix GUR PCI config registers properly), we should have
293 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
294 symbols in the sbc8641d board as well. Fix this oversight.
296 Signed-off-by: Jon Loeliger <jdl@freescale.com>
298 commit 64cd594e623c39f73964d18787763e4533f791f7
299 Author: Stefan Roese <sr@denx.de>
300 Date: Mon Feb 25 16:50:48 2008 +0100
302 ppc4xx: Fix acadia_nand build problem
304 Don't include testdram() on NAND-booting target acadia_nand. This saves
305 a few bytes and makes the target build clean again.
307 Signed-off-by: Stefan Roese <sr@denx.de>
309 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
310 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
311 Date: Sun Feb 24 23:03:12 2008 +0000
313 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
315 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
317 commit 724902c8464e610642b3a170278b99710325888e
318 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
319 Date: Sun Feb 24 23:03:11 2008 +0000
321 arm-imx: Fix registers definition
323 Sync registers definition with linux
325 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
327 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
328 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
329 Date: Sun Feb 24 23:03:10 2008 +0000
331 actua1/actua2/actua3: Fix multipleunused variable
334 actux1.c: In function 'checkboard':
335 actux1.c:92: warning: unused variable 'revision'
338 actux2.c: In function 'checkboard':
339 actux2.c:100: warning: unused variable 's'
340 actux2.c:99: warning: unused variable 'revision'
341 actux2.c: In function 'reset_phy':
342 actux2.c:130: warning: unused variable 'i'
345 actux3.c: In function 'checkboard':
346 actux3.c:114: warning: unused variable 'revision'
348 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
350 commit b29661fc1151077776454288051bc9a488351ce8
351 Author: Wolfgang Denk <wd@denx.de>
352 Date: Sun Feb 24 15:21:36 2008 +0100
354 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
356 Signed-off-by: Wolfgang Denk <wd@denx.de>
358 commit 00b48a48424894daa589d166d73277830b1c6ac4
359 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
360 Date: Sat Feb 23 12:15:56 2008 +0100
362 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
364 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
366 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
367 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
368 Date: Sat Feb 23 17:24:16 2008 +0900
370 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
372 ----------------------------------------------------------------
373 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
375 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
378 GCC can be made to warn about usage of long long types with ISO C90
379 (-ansi), but only with -pedantic. You can write this in a way that even
380 then it doesn't cause warnings, namely by:
383 __extension__ typedef __signed__ long long __s64;
384 __extension__ typedef unsigned long long __u64;
387 The __extension__ keyword in front of this switches off any pedantic
388 warnings for this expression.
390 Signed-off-by: Olaf Hering <olh@suse.de>
391 Cc: <linux-arch@vger.kernel.org>
392 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
393 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
394 ----------------------------------------------------------------
396 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
398 commit 208acd112e6517b21fc30c420396902b103563ac
399 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
400 Date: Sat Feb 23 17:07:57 2008 +0900
402 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
404 This will reduce the build time.
406 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
408 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
409 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
410 Date: Sat Feb 23 17:05:00 2008 +0900
412 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
414 This will reduce the build time.
416 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
418 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
419 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
420 Date: Sat Feb 23 16:58:41 2008 +0900
422 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
424 This reduces the build time by ~10%. Here's the gth2_config example.
427 real 0m31.441s 0m27.833s
428 user 0m24.766s 0m23.045s
429 sys 0m10.425s 0m7.468s
431 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
433 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
434 Author: Marcel Moolenaar <marcelm@juniper.net>
435 Date: Fri Feb 22 10:48:07 2008 -0800
437 make define2mk.sed work on FreeBSD
439 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
440 the define2mk.sed script was identified as the source of the link
441 failure on FreeBSD. The problem is that sed(1) does not always support
442 the '+' operator. It isn't on FreeBSD. The attach patch implements the
443 equivalent, using the '*' operator instead and should work everywhere.
445 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
447 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
448 Author: Detlev Zundel <dzu@denx.de>
449 Date: Fri Feb 22 17:21:32 2008 +0100
451 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
453 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
454 final traces of long-deprecated "ramdisk" kernel parm") makes these
457 Signed-off-by: Detlev Zundel <dzu@denx.de>
459 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
460 Author: Larry Johnson <lrj@acm.org>
461 Date: Thu Feb 21 13:58:16 2008 -0500
463 LM75 bug fix for negative temperatures
465 When the LM75 temperature sensor measures a temperature below 0 C, the
466 current driver does not perform sign extension, so the result returned is
467 256 C too high. This patch fixes the problem.
469 Signed-off-by: Larry Johnson <lrj@acm.org>
471 commit 5a910c224b13e413bda41922379add6d75c32da3
472 Author: Heiko Schocher <hs@denx.de>
473 Date: Thu Feb 21 18:33:45 2008 +0100
475 IDS8247: update MAINTAINER entry.
477 Signed-off-by: Heiko Schocher <hs@denx.de>
479 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
480 Author: Heiko Schocher <hs@denx.de>
481 Date: Thu Feb 21 18:31:15 2008 +0100
483 Fix device tree for mgsuvd board.
485 Rename the "scc" node in "ethernet" for the mgsuvd board.
487 Signed-off-by: Heiko Schocher <hs@denx.de>
489 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
490 Author: Yuri Tikhonov <yur@emcraft.com>
491 Date: Thu Feb 21 14:23:42 2008 +0100
493 lwmon5: enable hardware watchdog
495 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
496 causing it to reboot the board if U-Boot does a long busy-wait with
497 udelay(). Thus, for these boards we have to restart WD more
500 This patch splits the busy-wait udelay() into smaller, predefined,
501 intervals, so that the watchdog timer may be resetted with the
502 configurable (CONFIG_WD_PERIOD) interval.
504 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
506 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
507 Author: Anatolij Gustschin <agust@denx.de>
508 Date: Thu Feb 21 12:52:29 2008 +0100
510 ppc4xx: Support for ATI Radeon 9200 card on sequoia
512 Adds configuration option for ATI Radeon 9200 card
513 support to sequoia config file. If CONFIG_VIDEO
514 is enabled, TEXT_BASE should be changed to 0xFFF80000.
516 Signed-off-by: Anatolij Gustschin <agust@denx.de>
518 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
519 Author: Kumar Gala <galak@kernel.crashing.org>
520 Date: Mon Feb 18 08:18:07 2008 -0600
522 Remove duplicate defines for ARRAY_SIZE
524 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
525 the define in common.h.
527 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
529 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
530 Author: Kumar Gala <galak@kernel.crashing.org>
531 Date: Mon Feb 18 08:09:37 2008 -0600
533 ppc: Allow boards to specify effective amount of memory
535 For historical reasons we limited the stack to 256M because some boards
536 could only map that much via BATS. However newer boards are capable of
537 mapping more memory (for example 85xx is capable of doing up to 2G).
539 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
541 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
542 Author: Mike Frysinger <vapier@gentoo.org>
543 Date: Mon Feb 18 05:24:13 2008 -0500
545 include autoconf.mk before any other .mk files
547 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
548 those .mk files can have make if statements based on the current config.
550 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
552 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
553 Author: Mike Frysinger <vapier@gentoo.org>
554 Date: Mon Feb 18 05:10:07 2008 -0500
556 error check autoconf.mk generation
558 If any of the steps for generating autoconf.mk fail currently, they go
559 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
560 This is simpler and more robust than placing '|| exit $$?' after every line.
562 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
564 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
565 Author: Stefano Babic <sbabic@denx.de>
566 Date: Mon Feb 18 08:03:51 2008 +0100
568 Fix bug in dependency checking
570 By adding VERSION_FILE to the PHONY targets the script
571 /tools/setlocalversion is always called and version_autogenerated.h
572 is replaced only if the script find a modified source file.
574 Signed-off-by: Stefano Babic <sbabic@denx.de>
576 commit 98ba144ccc912eee90dd42699f023c497ce774c6
577 Author: Kyungmin Park <kmpark@infradead.org>
578 Date: Mon Feb 18 14:35:43 2008 +0900
580 Fix GPMC CS2 memory setup at apollon
582 It disables the current map first
584 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
586 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
587 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
588 Date: Sun Feb 17 23:52:46 2008 +0100
590 uli526x: Fix multiple differ in signedness and parentheses around comparison
592 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
594 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
595 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
596 Date: Sun Feb 17 16:58:04 2008 +0100
598 MIPS: Fix CFG_NO_FLASH support
600 - Fix flash_init call when CFG_NO_FLASH is used
601 - Remove no more needed flash.c for qemu-mips
603 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
605 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
606 Author: Mike Frysinger <vapier@gentoo.org>
607 Date: Sat Feb 16 02:40:18 2008 -0500
609 easylogo: clean up some more and add -r (rgb) support
611 Michael Hennerich added support for outputting an image in RGB format rather
612 than forcing YUYV all the time. This makes obvious sense if the display you
613 have takes RGB input rather than YUYV.
615 Rather than hack in support for options, I've converted it to use getopt and
616 cleaned up the argument parsing in the process.
618 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
619 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
621 commit f65c98129ccada3f7caf97d80395a95b84e911de
622 Author: Mike Frysinger <vapier@gentoo.org>
623 Date: Sat Feb 16 02:12:37 2008 -0500
625 Makefile: add target for $(LDSCRIPT)
627 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
628 then change into the board directory and try and create it. This allows you
629 to generate the linker script on the fly based upon board defines (like the
632 There should be no regressions due to this change as the normal case is to
633 already have a u-boot.lds file. If that's the case, then there's nothing to
634 generate, and so make will always exit. The fix here is that if the linker
635 script does not exist, the implicit rules take over and attempt to guess how
636 to generate the file.
638 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
640 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
641 Author: Michael Schwingen <michael@schwingen.org>
642 Date: Mon Feb 18 23:16:35 2008 +0100
644 CFI: Do not use uninitialized cmd_reset
646 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
649 From a short test, it looks like AMD-style flash roms treat *any* unknown
650 command write as a reset, at least when in CFI Query mode, so issuing the
651 Intel reset command to AMD-style flashs seems safe (from the small sample I
652 have), plus the 3-cycle magic sequence should kick the state machine into
653 the right state even without a reset command. Since the AMD-style flashs
654 require the unlock sequence for real operation, I chose to try the AMD reset
655 command first, so that Intel flashs do no see an invalid command prior to
658 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
659 plus Intel StrataFlash.
661 Signed-off-by: Michael Schwingen <michael@schwingen.org>
662 Signed-off-by: Stefan Roese <sr@denx.de>
664 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
665 Author: Rafal Jaworowski <raj@semihalf.com>
666 Date: Thu Feb 21 11:56:44 2008 +0100
668 API: Add (c) and licensing notice to the public API header.
670 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
672 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
673 Author: Yuri Tikhonov <yur@emcraft.com>
674 Date: Thu Feb 21 11:06:07 2008 +0100
676 Fix CPU POST test failure
678 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
679 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
680 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
681 This patch just saves the CR value before running the test code, so allowing
682 it to do anything it wants with CR.
684 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
685 Acked-by: Yuri Tikhonov <yur@emcraft.com>
688 commit d5908b093955415f3d340706378b991f911af671
689 Author: Jon Loeliger <jdl@freescale.com>
690 Date: Wed Feb 20 15:26:51 2008 -0600
692 8610HPCD: Document the flashbank selection switches.
694 Signed-off-by: Jon Loeliger <jdl@freescale.com>
696 commit a551cee99ad1d1da20fd23ad265de47448852f56
697 Author: Jon Loeliger <jdl@freescale.com>
698 Date: Wed Feb 20 14:22:26 2008 -0600
700 86xx: Fix GUR PCI config registers properly.
702 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
703 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
704 botched it due to not realizing that 8610 and 8641 had different
705 Global Utility Register defintions, one of which was like 85xx,
706 and the other wasn't. Correct this problem by introducing two
707 symbols, one for each 86xx SoC, but neither of which is named
710 My bad. Lovely Wednesday with git bisect. You know.
712 Signed-off-by: Jon Loeliger <jdl@freescale.com>
714 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
715 Author: Jon Loeliger <jdl@freescale.com>
716 Date: Wed Feb 20 12:24:11 2008 -0600
718 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
720 Without an actual supported video card hooked up, enabling
721 the CONFIG_VIDEO by default just makes it look broken by
722 routing all console output to the video card. Don't.
724 Signed-off-by: Jon Loeliger <jdl@freescale.com>
726 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
727 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
728 Date: Wed Jan 30 15:08:15 2008 -0600
730 ColdFire: Fix missing code flash size for M5485EVB
732 Signed-off-by: James Mahan <kmahan@freescale.com>
733 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
735 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
736 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
737 Date: Wed Jan 30 15:04:42 2008 -0600
739 ColdFire: Fix 5282 and 5271 interrupt mask bit
741 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
743 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
744 Author: Jon Loeliger <jdl@freescale.com>
745 Date: Tue Feb 19 12:31:08 2008 -0600
747 8610HPCD: Fix typos in two PCI setup registers.
749 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
750 were erroneously present as 85xx names and values, leftover from
751 the clone wars. Fix this by removing the 85xx cruft from the
754 Signed-off-by: Jon Loeliger <jdl@freescale.com>
756 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
757 Author: Jon Loeliger <jdl@freescale.com>
758 Date: Mon Feb 18 14:01:56 2008 -0600
760 86xx: Convert sbc8641d to use libfdt.
762 This is the proper fix for a missing closing brace in the function
763 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
764 The ft_cpu_setup() function in mpc8641hpcn.c should have been
765 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
766 but was missed. Only, the sbc8641d was nominally still using it.
767 It all got ripped out, and the funcality that was in ft_board_setup()
768 was refactored to remove the CPU portions into the new file
769 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
771 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
773 Signed-off-by: Jon Loeliger <jdl@freescale.com>
775 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
776 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
777 Date: Sun Feb 17 23:35:31 2008 +0100
779 mpc86xx: Fix unused variable 'config' and 'immap'
781 and remove useless CONFIG_DDR_INTERLEAVE
783 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
785 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
786 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
787 Date: Sun Feb 17 23:03:36 2008 +0100
789 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
791 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
793 commit b6f29c84c208a091f95a10cbc9852d729659ba20
794 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
795 Date: Sun Feb 17 14:15:31 2008 +0100
797 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
799 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
801 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
802 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
803 Date: Sun Feb 17 14:15:32 2008 +0100
805 pxa: fix assignment from incompatible pointer type
807 fix mmc_bread function prototype
809 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
811 commit 64d792063fff90b8118179b092feee09fe5cae13
812 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
813 Date: Sun Feb 17 14:15:30 2008 +0100
815 at91cap9adk: fix implicit declaration of function 'eth_init'
817 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
819 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
820 Author: Wolfgang Denk <wd@denx.de>
821 Date: Sun Feb 17 15:43:44 2008 +0100
823 Remove files added by mistake, update CHANGELOG.
825 Signed-off-by: Wolfgang Denk <wd@denx.de>
827 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
828 Author: Mike Nuss <mike@terascala.com>
829 Date: Wed Feb 6 11:10:11 2008 -0500
831 PPC440EPx: Optionally enable second I2C bus
833 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
834 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
835 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
837 Signed-off-by: Mike Nuss <mike@terascala.com>
838 Cc: Stefan Roese <sr@denx.de>
840 commit ef5b4f221c22d05770878513951745f236b5b43f
841 Author: Niklaus Giger <niklaus.giger@netstal.com>
842 Date: Tue Feb 5 10:26:44 2008 +0100
844 ppc4xx: HCU4/5. Cleanup configs
846 - hcu4.h: Removed define of CONFIG_PPC405GPr
847 - Corrected phy addresses
849 - Respect line length of 80 chars
851 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
853 commit 74973126d1be63ac75bdc192f46234dca3a7c421
854 Author: Niklaus Giger <niklaus.giger@netstal.com>
855 Date: Tue Feb 5 11:31:28 2008 +0100
857 ppc4xx: HCU4/5. Cleanups
859 - Fix some coding style violations.
860 - Use in/out_u16/32 where appropriate.
861 - Use register names from ppc405.h.
862 - Fix trace useage for Lauterbach.
863 - Remove obsolete generation HCU2.
864 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
866 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
868 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
869 Author: Niklaus Giger <niklaus.giger@netstal.com>
870 Date: Tue Feb 5 10:26:41 2008 +0100
872 ppc4xx: PPC405GPr fix missing register definitions
874 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
876 commit 214398d9cb22268d9d4f7563359edca0f78297a2
877 Author: Larry Johnson <lrj@acm.org>
878 Date: Fri Jan 18 21:49:05 2008 -0500
880 ppc4xx: Beautify configuration files for Sequoia and Korat boards
882 Signed-off-by: Larry Johnson <lrj@acm.org>
884 commit 30c6a241e88499f536e86d325759e29ba00ff67f
885 Author: Anatolij Gustschin <agust@denx.de>
886 Date: Fri Feb 15 20:09:01 2008 +0100
888 Wipe out assembler warnings while compiling x86 biosemu
890 This patch tries to get rid of some assembler warnings about
891 changed .got2 section type while compiling x86 bios emulator
894 Signed-off-by: Anatolij Gustschin <agust@denx.de>
896 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
897 Author: Wolfgang Denk <wd@denx.de>
898 Date: Fri Feb 15 00:57:09 2008 +0100
900 Prepare v1.3.2-rc1 release candidate
902 commit f33e9653c9c09868995d788511d573771c209fe5
903 Author: Anatolij Gustschin <agust@denx.de>
904 Date: Fri Feb 15 00:13:20 2008 +0100
906 Fix compile warning on lib_ppc/board.c
908 Signed-off-by: Anatolij Gustschin <agust@denx.de>
910 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
911 Author: Anatolij Gustschin <agust@denx.de>
912 Date: Thu Feb 14 18:22:04 2008 +0100
914 Add Radeon Mobility 9200 pci device id to the radeon driver
916 This patch extends PCI device id table of the
917 radeon driver so that the driver will also support
918 Radeon Mobility 9200 (M9+) based boards.
920 Signed-off-by: Anatolij Gustschin <agust@denx.de>
922 commit 1b8607e1f7143548c6062c28371449ec69588c00
923 Author: Anatolij Gustschin <agust@denx.de>
924 Date: Thu Feb 14 18:19:50 2008 +0100
926 Extend ATI Radeon driver to support more video modes
928 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
929 800x600, 640x480 at 24, 16 and 8 bpp.
931 Signed-off-by: Anatolij Gustschin <agust@denx.de>
933 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
934 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
935 Date: Sun Feb 10 17:05:20 2008 +0100
937 xsengine: fix typo and few coding style
939 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
941 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
942 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
943 Date: Fri Feb 8 21:25:58 2008 +0100
945 Fix wrong memory limit calculation in memory-test
947 If the length of the memory address range passed to the "mtest" command is
948 not of the form 2^x - 1, not all address lines are tested. This bug is
949 inherited from the original software at
950 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
953 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
955 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
956 Author: Wolfgang Denk <wd@denx.de>
957 Date: Fri Feb 15 00:11:39 2008 +0100
959 Coding STyle cleanup.
961 Signed-off-by: Wolfgang Denk <wd@denx.de>
963 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
964 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
965 Date: Tue Feb 5 13:30:43 2008 +0900
967 sh: Fix register address of SH7722
969 The address of SH7722 is wrong by old document.
970 This patch fixes this problem.
972 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
974 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
975 Author: Mike Frysinger <vapier@gentoo.org>
976 Date: Mon Feb 4 17:44:23 2008 -0500
978 only update version header as needed
980 Constantly rebuilding the version header will force useless relinking, so we
981 simply need to compare the new header with the existing one before updating
984 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
986 commit 208447f8e953f347425eb92c8e28d59e6d911363
987 Author: Mike Frysinger <vapier@gentoo.org>
988 Date: Mon Jan 28 05:56:19 2008 -0500
990 Do not specify a CROSS_COMPILE default when executing size
992 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
994 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
995 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
996 Date: Wed Feb 13 11:19:19 2008 +0100
998 Fix return value of mtest when CFG_ALT_MEMTEST set
1000 Fix a missing return statement from a non-void function.
1002 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
1004 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
1005 Author: Timur Tabi <timur@freescale.com>
1006 Date: Wed Jan 9 14:35:26 2008 -0600
1008 85xx, 86xx: Determine I2C clock frequencies and store in global_data
1010 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
1012 Update the get_clocks() function in 85xx and 86xx to determine the I2C
1013 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
1015 Signed-off-by: Timur Tabi <timur@freescale.com>
1017 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
1018 Author: Wolfgang Denk <wd@denx.de>
1019 Date: Thu Feb 14 23:18:01 2008 +0100
1021 TQM834x: clean up configuration
1023 Get board name consistent with Linux and elsewhere;
1024 get rid of local network definitions etc.
1026 Signed-off-by: Wolfgang Denk <wd@denx.de>
1028 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
1029 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1030 Date: Thu Feb 14 08:02:12 2008 +0100
1032 TFTP: fix search of ':' in BootFile
1034 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1036 commit 0bc9efada170096c6b273f19165e32936d330d80
1037 Author: Wolfgang Denk <wd@denx.de>
1038 Date: Thu Feb 14 22:46:55 2008 +0100
1040 Coding style cleanup; update CHANGELOG.
1042 Signed-off-by: Wolfgang Denk <wd@denx.de>
1044 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
1045 Author: Wolfgang Denk <wd@denx.de>
1046 Date: Thu Feb 14 22:43:22 2008 +0100
1048 PPC: Use r2 instead of r29 as global data pointer
1050 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
1051 will refuse to use load/store multiple insns; instead, it issues a
1052 list of simple load/store instructions upon function entry and exit,
1053 resulting in bigger code size, which in turn makes the build for a
1058 Signed-off-by: Wolfgang Denk <wd@denx.de>
1060 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
1061 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
1062 Date: Wed Jan 30 09:08:49 2008 +0100
1064 ARM: make the machid configurable via the environment
1066 If the variable "machid" exists, let do_bootm_linux use that instead
1067 of bd->bi_arch_number.
1069 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
1071 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
1072 Author: Vlad Lungu <vlad@comsys.ro>
1073 Date: Wed Jan 23 16:34:46 2008 +0200
1075 Use #ifdef CONFIG_FSLDMAFEC
1077 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
1080 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
1082 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
1083 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1084 Date: Sat Jan 19 10:25:59 2008 +0900
1086 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
1088 Current MII_DEBUG is confusing in two ways. One is useless define-then-
1089 undef at the top of the file. The other is there is only one debug() in
1090 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
1091 While there are many useful printf()/puts() debug codes, but they are for
1092 DEBUG, not for MII_DEBUG.
1094 This patch tries to put them all together into MII_DEBUG and debug().
1096 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1098 commit 751b9b5189f3274b03c809172631316d6b002c82
1099 Author: Kyungmin Park <kmpark@infradead.org>
1100 Date: Thu Jan 17 16:43:25 2008 +0900
1102 OneNAND Initial Program Loader (IPL) support
1104 This patch enables the OneNAND boot within U-Boot.
1105 Before this work, we used another OneNAND IPL called X-Loader based
1106 on open source. With this work, we can build the oneboot.bin image
1107 without other program.
1109 The build sequence is simple.
1110 First, it compiles the u-boot.bin
1111 Second, it compiles OneNAND IPL
1112 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
1113 The mechanism is similar with NAND boot except it boots from itself.
1115 Another thing is that you can only use the OneNAND IPL only to work
1116 other bootloader such as RedBoot and so on.
1118 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1120 commit 21f6f9636f0e978397548751347425fbf8d42bb3
1121 Author: Andy Fleming <afleming@freescale.com>
1122 Date: Wed Jan 16 13:06:59 2008 -0600
1124 Fix CONFIG_MMC usage in fat code
1126 A #if statement in fat.c depended on CONFIG_MMC, instead of
1127 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
1128 as "1" rather than just defined. Now it's better.
1130 Signed-off-by: Andy Fleming <afleming@freescale.com>
1132 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
1133 Author: Rafal Jaworowski <raj@semihalf.com>
1134 Date: Tue Jan 15 12:52:31 2008 +0100
1136 ppc: Refactor cache routines, so there is only one common set.
1138 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1140 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
1141 Author: Jon Loeliger <jdl@jdl.com>
1142 Date: Wed Jan 23 15:55:02 2008 -0600
1144 86xx: Fix compilation warning in sys_eprom.c
1146 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
1148 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1150 commit 65230107025733e89e28fd5e5cfd916d4953c28a
1151 Author: Haavard Skinnemoen <hskinnemoen at>
1152 Date: Fri Feb 22 11:40:50 2008 +0000
1154 Move AT91RM9200DK board support under board/atmel
1156 We already have a vendor subdir for Atmel, so we should use it.
1158 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
1160 commit 6d0943a6be99977d6d853d51749e9963d68eb192
1161 Author: Andreas Engel <andreas.engel@ericsson.com>
1162 Date: Mon Jan 14 09:06:52 2008 +0000
1164 ARM: cleanup duplicated exception handlingcode
1166 Move duplicated exception handling code into lib_arm.
1168 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
1170 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
1171 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
1172 Date: Fri Feb 1 10:09:03 2008 +0000
1174 Support for Artila M-501 starter kit
1176 Kimmo Leppala / Sysart and
1177 Timo Tuunainen / Sysart
1179 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
1180 Author: Stelian Pop <stelian@popies.net>
1181 Date: Mon Feb 11 10:50:19 2008 +0000
1185 ---------------------------------
1187 read_dataflash() takes a signed char pointer as a parameter. Silence a
1188 few warnings dues to incorrect parameter types in env_dataflash.c.
1190 Signed-off-by: Stelian Pop <stelian@popies.net>
1192 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
1193 Author: Stelian Pop <stelian@popies.net>
1194 Date: Thu Feb 7 09:42:57 2008 +0000
1196 AT91CAP9 support : move board files to Atmel vendor directory.
1198 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
1200 Signed-off-by: Stelian Pop <stelian@popies.net>
1202 commit 7263ef191b87da94768f762c7093bedeb70db98f
1203 Author: Stelian Pop <stelian at>
1204 Date: Thu Jan 3 21:15:56 2008 +0000
1206 AT91CAP9 support : MACB changes
1208 Signed-off-by: Stelian Pop <stelian <at> popies.net>
1209 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
1211 commit 6afcabf11d7321850f4feaadfee841488ace54c5
1212 Author: Stelian Pop <stelian@popies.net>
1213 Date: Thu Feb 7 16:37:54 2008 +0000
1215 AT91CAP9 support : board/ files
1217 Signed-off-by: Stelian Pop <stelian@popies.net>
1219 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
1220 Author: Stelian Pop <stelian at>
1221 Date: Wed Jan 30 21:15:54 2008 +0000
1223 AT91CAP9 support : cpu/ files
1225 Signed-off-by: Stelian Pop <stelian <at> popies.net>
1227 commit fa506a926cec348805143576c941f8e61b333cc0
1228 Author: Stelian Pop <stelian@popies.net>
1229 Date: Thu Jan 31 21:15:53 2008 +0000
1231 AT91CAP9 support : include/ files
1233 Signed-off-by: Stelian Pop <stelian@popies.net>
1235 commit 20b197c6f2799af399a68f96a1aff543a75621b8
1236 Author: Stelian Pop <stelian@popies.net>
1237 Date: Sun Jan 20 19:49:21 2008 +0000
1239 AT91CAP9 support : build integration
1241 Signed-off-by: Stelian Pop <stelian@popies.net>
1243 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
1244 Author: Stelian Pop <stelian@popies.net>
1245 Date: Sun Jan 20 21:07:00 2008 +0000
1247 Improve DataFlash CS definition.
1249 Use a structure instead of the error prone unnamed array to
1250 define the possible dataflash banks.
1252 Signed-off-by: Stelian Pop <stelian@popies.net>
1254 commit a6cdd21b56014208706238712a853a9e9a0a2290
1255 Author: Stelian Pop <stelian@popies.net>
1256 Date: Sat Jan 19 21:09:35 2008 +0000
1258 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
1260 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
1262 cpu/arm926ejs/start.o: In function `cpu_init_crit':
1263 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
1265 Signed-off-by: Stelian Pop <stelian@popies.net>
1267 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
1268 Author: Peter Pearse <peter.pearse@arm.com>
1269 Date: Fri Feb 1 16:50:24 2008 +0000
1271 Fix timer overflow in DaVinci
1272 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
1274 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
1275 Author: Peter Pearse <peter.pearse@arm.com>
1276 Date: Fri Feb 1 16:49:08 2008 +0000
1278 Update board NetStar
1279 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1281 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
1282 Author: Niklaus Giger <niklaus.giger@netstal.com>
1283 Date: Tue Feb 5 10:26:42 2008 +0100
1285 ppc4xx: HCU4/5. Fix make O=../xx
1287 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1289 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
1290 Author: Larry Johnson <lrj@acm.org>
1291 Date: Tue Jan 22 08:51:59 2008 -0500
1293 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
1295 Signed-off-by: Larry Johnson <lrj@acm.org>
1297 commit fe891ecf4d187e9d11dde869ed4623af52b54451
1298 Author: Hiroshi Ito <ito@mlb.co.jp>
1299 Date: Thu Jan 31 18:35:04 2008 +0900
1301 NFS Timeout with large files.
1303 Retry to send NFS packet before reaching timeout.
1305 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
1307 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
1308 Author: Johannes Stezenbach <js@sig21.net>
1309 Date: Tue Jan 29 00:11:25 2008 +0100
1311 Add dependencies to avoid race conditions with parallel make.
1313 Signed-off-by: Johannes Stezenbach <js@sig21.net>
1315 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
1316 Author: Mike Frysinger <vapier@gentoo.org>
1317 Date: Mon Jan 28 05:46:01 2008 -0500
1319 Mark board_init_[fr] as noreturn
1321 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1323 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
1324 Author: Mike Frysinger <vapier@gentoo.org>
1325 Date: Mon Jan 28 05:28:50 2008 -0500
1327 Only use TEXT_BASE if defined by the board
1329 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1331 commit 1b769881750030f10743808b9d6013e11f559350
1332 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1333 Date: Fri Jan 25 07:54:47 2008 +0100
1335 Fix remaining CONFIG_COMMANDS
1340 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1342 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
1343 Author: Niklaus Giger <niklaus.giger@netstal.com>
1344 Date: Mon Jan 21 16:46:00 2008 +0100
1346 Add *~ to .gitignore
1348 One should never add a backup file ending in with ~ to the git repository.
1350 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1352 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
1353 Author: Kumar Gala <galak@kernel.crashing.org>
1354 Date: Thu Jan 17 00:02:10 2008 -0600
1356 Remove duplicate defines for ARRAY_SIZE
1358 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1360 commit c77ce474b1c57b13e9d36d9830f147966c143694
1361 Author: Stelian Pop <stelian@popies.net>
1362 Date: Mon Jan 14 22:08:14 2008 +0100
1364 Fix incorrect address test in AT91F_DataflashSelect().
1366 Signed-off-by: Stelian Pop <stelian@popies.net>
1368 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
1369 Author: Kumar Gala <galak@kernel.crashing.org>
1370 Date: Wed Feb 13 15:09:58 2008 -0600
1372 Fix building of fdt_support.c if DEBUG set
1374 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1376 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
1377 Author: Jon Loeliger <jdl@freescale.com>
1378 Date: Tue Feb 12 14:53:28 2008 -0600
1380 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
1382 These replace direct structure references for IMMR sections.
1384 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1386 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
1387 Author: Wolfgang Denk <wd@denx.de>
1388 Date: Tue Feb 12 00:45:06 2008 +0100
1390 Get rid of "#undef DEBUG" from board config files.
1392 Signed-off-by: Wolfgang Denk <wd@denx.de>
1394 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
1395 Author: Timur Tabi <timur@freescale.com>
1396 Date: Tue Jan 15 17:09:41 2008 -0600
1398 Remove #undef DEBUG from MPC83xx board header files
1400 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
1401 The inclusion of this line makes it impossible to enable debug code in
1402 other source files, because "#define DEBUG" typically needs to be defined
1403 before any header files are included.
1405 Signed-off-by: Timur Tabi <timur@freescale.com>
1407 commit 69018ce2e086e9caf35b914d675b82bc4888f077
1408 Author: Kumar Gala <galak@kernel.crashing.org>
1409 Date: Thu Jan 17 08:25:45 2008 -0600
1411 QE: Move FDT support into a common file
1413 Move the flat device tree setup for QE related devices into
1414 a common file shared between 83xx & 85xx platforms that have QE's.
1416 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1418 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
1419 Author: Grzegorz Bernacki <gjb@semihalf.com>
1420 Date: Mon Jan 28 10:15:02 2008 +0100
1422 ADS5121e: DDR2 init/timing update.
1424 Signed-off-by: John Rigby <jrigby@freescale.com>
1425 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
1427 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
1428 Author: John Rigby <jrigby@freescale.com>
1429 Date: Wed Jan 30 13:36:57 2008 -0700
1433 Changes to match 5121 device tree going mainline in 2.6.25.
1435 Change OF_SOC from "soc5121" to plain "soc".
1436 Remove unneeded "ref-frequency" fixups.
1437 Remove "address" enetaddr fixup.
1439 Add bus-frequency fixup for old OF_SOC so old
1440 kernels with old device trees will work with new
1441 u-boot with 66MHz IPS clock
1443 Signed-off-by: John Rigby <jrigby@freescale.com>
1445 commit de55d18df3ff2ea614624e74793de7c43520e0e7
1446 Author: John Rigby <jrigby@freescale.com>
1447 Date: Wed Jan 30 13:36:56 2008 -0700
1449 Change IPS freq to 66MHz
1451 Recommended frequency is 66MHz
1452 Change divider from 4 to 3.
1454 Signed-off-by: John Rigby <jrigby@freescale.com>
1456 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
1457 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1458 Date: Mon Jan 14 22:38:55 2008 +0100
1460 xsengine: rename board_post_init to board_late_init
1462 missing migration from "Cleanup of some init functions"
1463 in c837dcb1a316745092567bfe4fb266d0941884ff
1465 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1467 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
1468 Author: Larry Johnson <lrj@acm.org>
1469 Date: Sat Jan 12 23:35:33 2008 -0500
1471 Add attribute POST_PREREL to ECC memory POST
1473 Signed-off-by: Larry Johnson <lrj@acm.org>
1475 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
1476 Author: Kumar Gala <galak@kernel.crashing.org>
1477 Date: Thu Jan 17 08:25:45 2008 -0600
1479 QE: Move FDT support into a common file
1481 Move the flat device tree setup for QE related devices into
1482 a common file shared between 83xx & 85xx platforms that have QE's.
1484 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1486 commit d38da537943cd36356b9d3d9d9b60533554b81d8
1487 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1488 Date: Wed Jan 23 17:20:14 2008 +0100
1490 AVR32: Make SDRAM refresh rate configurable
1492 The existing code assumes the SDRAM row refresh period should always
1493 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
1494 refresh rate should really be 7.81 us.
1496 Add a refresh_period member to struct sdram_info and initialize it
1497 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
1498 panic() until the refresh_period member is updated properly.
1500 Big thanks to Gerhard Berghofer for pointing out this issue.
1502 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1504 commit 61151cccb660cdb06a07fb283de6089913d7bde0
1505 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1506 Date: Thu Apr 19 10:10:11 2007 +0200
1508 ATSTK1000: Fix potential flash programming bug
1510 The (now obsolete) atngw100 flash programming code was having problems
1511 programming the onboard at49bv642 chip. The atstk1000 flash
1512 programming code may have the same bug, so import fix for this problem
1513 from the AVR32 Linux BSP.
1515 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1517 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
1518 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1519 Date: Thu Nov 22 17:04:13 2007 +0100
1521 ATSTK1004: Fix comment about default load address
1523 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
1524 wouldn't have worked anyway since the board can only access 4MB of
1527 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1529 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
1530 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1531 Date: Thu Nov 22 17:01:24 2007 +0100
1533 ATSTK1002: Use SDRAM + 4MB as default load address
1535 Many people run into problems when they compile a big kernel and load
1536 the uImage at the default SDRAM + 2MB address as the kernel will
1537 overwrite the uImage as it is being unpacked. Increase the default
1538 load address so that we can load a 4MB kernel image without any
1541 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1543 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
1544 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1545 Date: Thu Nov 22 16:51:39 2007 +0100
1547 ATNGW100: Fix default mtest range
1549 Let mtest cover the whole SDRAM except the last megabyte, which is
1552 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1554 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
1555 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1556 Date: Tue Jan 22 15:31:56 2008 +0900
1558 sh: Fix register address of SH7722.
1560 The address of SH7722 is wrong by old document.
1561 This patch fixes this problem.
1563 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1565 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
1566 Author: Mike Frysinger <vapier@gentoo.org>
1567 Date: Mon Feb 4 19:26:57 2008 -0500
1569 new command for displaying strings at specified memory locations
1571 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1573 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
1574 Author: Mike Frysinger <vapier@gentoo.org>
1575 Date: Mon Feb 4 19:26:57 2008 -0500
1577 rewrite/cleanup Blackfin RTC driver
1579 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1581 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
1582 Author: Mike Frysinger <vapier@gentoo.org>
1583 Date: Mon Feb 4 19:26:57 2008 -0500
1585 generate u-boot.ldr for Blackfin targets
1587 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1589 commit b779f7a59530436040f157f7841db7ab796542df
1590 Author: Mike Frysinger <vapier@gentoo.org>
1591 Date: Mon Feb 4 19:26:57 2008 -0500
1593 scrub unused symbols
1595 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1597 commit cc2977acc3bbbb7850f16645dd1081f95335868d
1598 Author: Mike Frysinger <vapier@gentoo.org>
1599 Date: Mon Feb 4 19:26:57 2008 -0500
1601 move Blackfin cpu object list to respective cpu directories
1603 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1605 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
1606 Author: Mike Frysinger <vapier@gentoo.org>
1607 Date: Mon Feb 4 19:26:57 2008 -0500
1609 interface to Blackfin on-chip One-Time-Programmable memory
1611 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1613 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
1614 Author: Mike Frysinger <vapier@gentoo.org>
1615 Date: Mon Feb 4 19:26:56 2008 -0500
1617 add support for memory commands with Blackfin L1 instruction memory
1619 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1621 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
1622 Author: Mike Frysinger <vapier@gentoo.org>
1623 Date: Mon Feb 4 19:26:56 2008 -0500
1625 use C code rather than inline assembly
1627 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1629 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
1630 Author: Mike Frysinger <vapier@gentoo.org>
1631 Date: Mon Feb 4 19:26:56 2008 -0500
1633 add Blackfin-specific reginfo command
1635 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1637 commit 0858b835e7ea501ea084d34cef75932f098342bb
1638 Author: Mike Frysinger <vapier@gentoo.org>
1639 Date: Mon Feb 4 19:26:55 2008 -0500
1641 add support for Blackfin symbol prefixes to examples
1643 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1645 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
1646 Author: Mike Frysinger <vapier@gentoo.org>
1647 Date: Mon Feb 4 19:26:55 2008 -0500
1649 add Blackfin-specific bdinfo command
1651 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1653 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
1654 Author: Mike Frysinger <vapier@gentoo.org>
1655 Date: Mon Feb 4 19:26:55 2008 -0500
1657 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
1659 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1661 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
1662 Author: Mike Frysinger <vapier@gentoo.org>
1663 Date: Mon Feb 4 19:26:55 2008 -0500
1665 unify the Blackfin board targets
1667 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1669 commit d4d7730853e5d675f76ec666807da3028c91d592
1670 Author: Mike Frysinger <vapier@gentoo.org>
1671 Date: Mon Feb 4 19:26:55 2008 -0500
1673 punt Blackfin VDSP headers and import sanitized/auto-generated ones
1675 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1677 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
1678 Author: Mike Frysinger <vapier@gentoo.org>
1679 Date: Mon Feb 4 19:26:54 2008 -0500
1681 always pull in asm/blackfin.h for Blackfin ports
1683 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1685 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
1686 Author: Mike Frysinger <vapier@gentoo.org>
1687 Date: Mon Feb 4 19:26:54 2008 -0500
1689 add missing __raw versions of Blackfin read/write io functions
1691 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1693 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
1694 Author: Mike Frysinger <vapier@gentoo.org>
1695 Date: Mon Feb 4 19:26:54 2008 -0500
1697 add the default Blackfin logo used by Blackfin boards with splash screens
1699 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1701 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
1702 Author: Mike Frysinger <vapier@gentoo.org>
1703 Date: Mon Feb 4 19:26:54 2008 -0500
1705 add some more Blackfin docs
1707 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1709 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
1710 Author: Mike Frysinger <vapier@gentoo.org>
1711 Date: Mon Feb 4 19:26:54 2008 -0500
1713 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
1715 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1717 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
1718 Author: Mike Frysinger <vapier@gentoo.org>
1719 Date: Mon Feb 4 19:26:54 2008 -0500
1721 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
1723 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1725 commit b45264ee85cbd92020640a32e02fb434fd557108
1726 Author: Mike Frysinger <vapier@gentoo.org>
1727 Date: Mon Feb 4 19:26:53 2008 -0500
1729 add gitignores for Blackfin pieces
1731 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1733 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
1734 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1735 Date: Fri Jan 18 01:14:03 2008 +0100
1737 TFTP: add host ip addr support
1739 allow to use a different server as set in serverip
1740 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
1741 if not defined the max length will be at 128
1743 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1745 commit e56b4b494cd92def577969f9678395aa22d34c9f
1746 Author: Timur Tabi <timur@freescale.com>
1747 Date: Wed Jan 9 14:35:26 2008 -0600
1749 85xx,86xx: Determine I2C clock frequencies and store in global_data
1751 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
1753 Update the get_clocks() function in 85xx and 86xx to determine the I2C
1754 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
1756 Signed-off-by: Timur Tabi <timur@freescale.com>
1758 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
1759 Author: Wolfgang Denk <wd@denx.de>
1760 Date: Thu Dec 27 10:56:54 2007 +0100
1762 OMAP5912: fix FIFO handling in UART driver
1764 According to the OMAP5912 Serial Interfaces Reference Guide (see
1765 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
1766 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
1767 changed when the baud clock is not running, i. e. when both DLL and
1770 Thus make sure that DLL and DLH are 0 when writing the FCR.
1772 Signed-off-by: Wolfgang Denk <wd@denx.de>
1774 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
1775 Author: Harald Welte <laforge@openmoko.org>
1776 Date: Wed Dec 19 15:10:52 2007 +0100
1778 ARM: S3C24x0 SoC NAND controller support
1780 This patch adds NAND support to the S3C24x0 SoC code in u-boot
1782 Signed-off-by: Harald Welte <laforge@openmoko.org>
1784 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
1785 Author: Harald Welte <laforge@openmoko.org>
1786 Date: Wed Dec 19 14:24:40 2007 +0100
1788 ARM: s3c24xx: Multiple serial port support
1790 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
1792 Signed-off-by: Harald Welte <laforge@openmoko.org>
1794 commit a25f72f1f73a11de68251fb88c89991e202e68fa
1795 Author: Harald Welte <laforge@openmoko.org>
1796 Date: Wed Dec 19 14:16:57 2007 +0100
1798 ARM: arm920t: Allow use of 'gd' pointer from IRQ
1800 This patch allows us to use the 'gd' pointer (and thus environment
1801 and everything else associated with it) from interrupt context on
1804 Signed-off-by: Harald Welte <laforge@openmoko.org>
1806 commit be19bd5cd0f454b63298844a0b5377e029b2caad
1807 Author: Harald Welte <laforge@openmoko.org>
1808 Date: Wed Dec 19 14:19:38 2007 +0100
1810 ARM: arm920/s3c24xx: IRQ demulitplexer callback
1812 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
1813 plus a stub implementation of it for the S3C2410.
1815 The purpose is to allow arm920t implementations such as the s3c24x0 to
1816 implement interrupt handlers in u-boot without having to touch core
1819 Signed-off-by: Harald Welte <laforge@openmoko.org>
1821 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
1822 Author: Hebbar <gururajakr@sanyo.co.in>
1823 Date: Tue Dec 18 16:03:07 2007 -0800
1825 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
1827 Add ifdef to bdinfo command to display ethernet information
1828 only if CONFIG_CMD_NET is defined for arm modules.
1830 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
1832 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
1833 Author: Hebbar <gururajakr@sanyo.co.in>
1834 Date: Tue Dec 18 16:00:54 2007 -0800
1836 ARM: add I2C init function call in lib_arm/board.c
1838 Adds I2C init func call to init sequence for ARM boards. This is
1839 present in ppc,blackfin and other processor init sequence.
1841 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
1843 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
1844 Author: Stefan Roese <sr@denx.de>
1845 Date: Fri Feb 1 09:38:29 2008 +0100
1847 ppc4xx: Fix ndfc HW ECC byte order
1849 The current ndfc HW ECC implementation swaps the first two ECC bytes.
1850 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
1851 so this swapping in the HW ECC driver is bogus. This patch fixes this
1852 problem and now really uses the SMC ECC byte order.
1854 Thanks to Sean MacLennan for pointing this out.
1856 Signed-off-by: Stefan Roese <sr@denx.de>
1858 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
1859 Author: Stefan Roese <sr@denx.de>
1860 Date: Wed Jan 30 15:35:50 2008 +0100
1862 ppc4xx: Fix GPIO configuration for pcs440ep
1864 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
1865 49-63 for GPIO. They have been configured as trace signals. This patch
1866 fixes this by clearing the corresponding bit.
1868 Signed-off-by: Stefan Roese <sr@denx.de>
1870 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
1871 Author: Stefan Roese <sr@denx.de>
1872 Date: Wed Jan 30 14:48:28 2008 +0100
1874 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
1876 Signed-off-by: Stefan Roese <sr@denx.de>
1878 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
1879 Author: Ladislav Michl <ladis@linux-mips.org>
1880 Date: Fri Dec 7 00:42:32 2007 +0100
1882 ARM: Board voiceblue update
1884 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1886 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
1887 Author: Ladislav Michl <ladis@linux-mips.org>
1888 Date: Thu Dec 6 23:24:57 2007 +0100
1890 ARM: AT91RM9200 based boards config cleanup
1892 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1894 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
1897 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
1898 Author: Ladislav Michl <ladis@linux-mips.org>
1899 Date: Thu Dec 6 22:59:16 2007 +0100
1901 ARM: Fix at91rm9200dk base address
1903 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
1904 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
1905 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
1906 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
1907 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
1908 I'm sending this patch 4th (!) time in hope it produces at least some
1911 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1913 Fix at91rm9200dk base and environment address.
1915 commit c95219fae2a7add7daa2f91aedca65b1698465c7
1916 Author: stefano babic <sbabic@denx.de>
1917 Date: Tue Nov 20 10:40:24 2007 +0100
1919 MMC for PXA 27X (resubmit)
1921 MMC support for X_Scale PXA is broken and does not work.
1922 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
1923 There were already some patches around the world but none of them was
1924 merged into the official u-boot tree.
1926 This patch makes order fixing this issue. Resubmit after code cleanup.
1928 Applied and tested on PXA 270 (TrizepsIV module).
1930 Signed-off-by: Stefano Babic <sbabic@denx.de>
1932 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
1933 Author: stefano babic <sbabic@denx.de>
1934 Date: Tue Nov 20 10:37:04 2007 +0100
1936 Fix gcc issues in pxa-regs.h
1938 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
1939 issues generates wrong code.
1940 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
1941 This patch fixes the problem and solves the gcc-4 issues as the linux
1944 Signed-off-by: Stefano Babic <sbabic@denx.de>
1945 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
1947 commit 7047b388876e7b905b2ec4edb8010543e3641b85
1948 Author: Jens Gehrlein <sew_s@tqs.de>
1949 Date: Tue Jan 29 08:45:03 2008 +0100
1951 TQM834x: enable DHCP
1953 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
1954 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1956 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
1957 Author: Jens Gehrlein <sew_s@tqs.de>
1958 Date: Tue Jan 29 08:45:02 2008 +0100
1960 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
1962 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
1963 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1965 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
1966 Author: Ben Warren <biggerbadderben@gmail.com>
1967 Date: Sat Jan 26 23:41:19 2008 -0500
1969 Fix conditional compilation of mpx8xxx_spi driver
1971 This driver should only compile if CONFIG_MPC8XXX_SPI is set
1973 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1974 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1976 commit 63f732d3d3880feb531f48af247c025bf01462b0
1977 Author: Rafal Jaworowski <raj@semihalf.com>
1978 Date: Tue Jan 29 17:00:34 2008 +0100
1980 API: Provide dummy halt() in the glue layer.
1982 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
1984 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1986 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
1987 Author: Rafal Jaworowski <raj@semihalf.com>
1988 Date: Tue Jan 29 16:57:38 2008 +0100
1990 API: Convert conditional building to the new scheme.
1992 This fixes a build breakage with CONFIG_API enabled, which appeared after
1993 the recent changes in the U-Boot build system.
1995 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
1997 commit 98b742489c09780be6a832eeaa4e5eff824792bb
1998 Author: Wolfgang Denk <wd@denx.de>
1999 Date: Fri Jan 25 09:56:17 2008 +0100
2001 inka4x0: remove dead code
2003 Signed-off-by: Wolfgang Denk <wd@denx.de>
2005 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
2006 Author: Becky Bruce <becky.bruce@freescale.com>
2007 Date: Wed Jan 23 16:31:06 2008 -0600
2009 86xx: Add reginfo command
2011 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2013 commit ddcebcb638715a6278da93b553d5016f99823816
2014 Author: Becky Bruce <becky.bruce@freescale.com>
2015 Date: Wed Jan 23 16:31:05 2008 -0600
2017 86xx: Add print_laws function to fsl_law.c
2019 This can be used for debug, and will be used by board code
2020 to help implement reginfo.
2022 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2024 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
2025 Author: Becky Bruce <becky.bruce@freescale.com>
2026 Date: Wed Jan 23 16:31:04 2008 -0600
2028 86xx: Remove old-style law setup code
2030 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
2032 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2034 commit 713d8186649dae874613d495b0cecaa039a98b30
2035 Author: Becky Bruce <becky.bruce@freescale.com>
2036 Date: Wed Jan 23 16:31:03 2008 -0600
2038 86xx: Convert sbc8641d to use new law setup code.
2040 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2042 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
2043 Author: Becky Bruce <becky.bruce@freescale.com>
2044 Date: Wed Jan 23 16:31:02 2008 -0600
2046 86xx: Convert mpc8610hpcd to new law setup method.
2048 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2050 commit 4933b91f8a49e436681f163df3173beb91cac44a
2051 Author: Becky Bruce <becky.bruce@freescale.com>
2052 Date: Wed Jan 23 16:31:01 2008 -0600
2054 86xx: Support new law setup method and convert mpc8641
2056 Adds the support code in cpu/mpc86xx for the new law setup code
2057 recently created fsl_law.c, and changes the MPC8641HPCN config
2060 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2062 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
2063 Author: Becky Bruce <becky.bruce@freescale.com>
2064 Date: Wed Jan 23 16:31:00 2008 -0600
2066 86xx: Rearrange the sequence in start.S
2068 * split the BAT initialization so that only 2 BATs (for the boot page
2069 and stack) are programmed very early on. The rest are initialized later.
2070 * Move other BAT setup, ccsrbar setup, and law setup later in the code
2071 after translation has been enabled.
2073 These changes will facilitate the moving of law and BAT initialization
2074 to C code, and will aid with 36-bit physical addressing support.
2076 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2078 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
2079 Author: Wolfgang Denk <wd@denx.de>
2080 Date: Wed Jan 23 14:41:37 2008 +0100
2082 Coding Style Cleanup; update CHANGELOG
2084 Signed-off-by: Wolfgang Denk <wd@denx.de>
2086 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
2087 Author: Wolfgang Denk <wd@denx.de>
2088 Date: Wed Jan 23 14:31:17 2008 +0100
2090 Coding Style Cleanup; update CHANGELOG
2092 Signed-off-by: Wolfgang Denk <wd@denx.de>
2094 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
2095 Author: Dave Liu <r63238@freescale.com>
2096 Date: Fri Jan 18 10:07:04 2008 +0800
2098 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
2100 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
2101 cause the 83xx immap broken, so the DMA and PCI will
2104 The patch fix the struct spi8xxx and rm struct spi83xx.
2106 Signed-off-by: Dave Liu <daveliu@freescale.com>
2107 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2109 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
2110 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2111 Date: Sat Apr 14 17:11:49 2007 +0200
2113 AVR32: ATNGW100 board support
2115 Add support for the ATNGW100 Network Gateway reference design,
2116 including flash, ethernet and MMC support.
2118 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2120 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
2121 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2122 Date: Sat Nov 24 18:15:31 2007 +0100
2124 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
2126 I don't know why the relevant layers can't do this by itself, but this
2129 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2131 commit 799891ef7b1b3432032ec23466df6b665a797fa4
2132 Author: Michael Schwingen <michael@schwingen.org>
2133 Date: Fri Jan 18 00:04:28 2008 +0100
2135 Add AcTux board support
2139 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
2141 contain changes for multiple boards, the board-specific files follow as
2144 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2146 commit 66a4344a4d910a11125df7768899ad529719855e
2147 Author: Michael Schwingen <michael@schwingen.org>
2148 Date: Wed Jan 16 19:53:23 2008 +0100
2150 add AcTux-4 board support
2152 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2154 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
2155 Author: Michael Schwingen <michael@schwingen.org>
2156 Date: Wed Jan 16 19:51:55 2008 +0100
2158 add AcTux-3 board support
2160 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2162 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
2163 Author: Michael Schwingen <michael@schwingen.org>
2164 Date: Wed Jan 16 19:51:14 2008 +0100
2166 add AcTux-2 board support
2168 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2170 commit ea99e8f05b7240fd657739e286664664ae160abe
2171 Author: Michael Schwingen <michael@schwingen.org>
2172 Date: Wed Jan 16 19:50:37 2008 +0100
2174 add AcTux-1 board support
2176 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2178 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
2179 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2180 Date: Mon Jan 14 19:20:08 2008 +0100
2182 ARM: remove useless function board_post_init
2184 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2186 commit 96bd462942022e4569b582c072a0ed26de1cd19b
2187 Author: Michael Schwingen <michael@schwingen.org>
2188 Date: Thu Jan 10 14:59:46 2008 +0100
2192 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
2193 No handshaking is done, but the active RTS signal allows to
2194 connect to the target using a PC which is using RTS/CTS
2195 handshake, and does no harm if the PC is set to ignore RTS.
2197 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2199 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
2200 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2201 Date: Mon Jan 7 08:41:34 2008 +0100
2203 IXP: add dynamic microcode addr
2205 allow to load the microde from flash or ram by download it through
2206 the serial or other.
2208 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2209 Acked-by: Stefan Roese <sr@denx.de>
2211 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
2212 Author: Michael Schwingen <michael@schwingen.org>
2213 Date: Sat Nov 10 15:44:12 2007 +0100
2215 load ixp42x NPE firmware from separate flash block, remove dead code
2219 the following patch adds support to move the IXP42X NPE firmware to a
2220 separate flash block, whose start address is defined in
2221 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
2222 NPE-enabled u-boot without copyright problems due to the NPE firmware.
2224 I hope the patch applies, I get whitespace-related differences in the NPE
2225 files due to trailing whitespace in the original versions.
2227 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2228 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2230 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
2231 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2232 Date: Tue Jan 15 14:15:46 2008 -0600
2234 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
2236 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2237 Signed-off by: John Rigby <jrigby@freescale.com>
2239 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
2240 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2241 Date: Tue Jan 15 14:02:49 2008 -0600
2243 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
2245 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2246 Signed-off by: John Rigby <jrigby@freescale.com>
2248 commit 777d1abd9796f1c2e148417cc10657e847d318ce
2249 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2250 Date: Tue Jan 15 14:00:25 2008 -0600
2252 ColdFire: Add MCF547x_8x FEC driver
2254 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2255 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2256 Signed-off by: John Rigby <jrigby@freescale.com>
2258 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
2259 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2260 Date: Tue Jan 15 13:54:09 2008 -0600
2262 ColdFire: Add MCF547x_8x dma code and header files
2264 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2265 Signed-off by: John Rigby <jrigby@freescale.com>
2267 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
2268 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2269 Date: Tue Jan 15 13:52:03 2008 -0600
2271 ColdFire: Add MCF547x_8x dma code - 2
2273 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2274 Signed-off by: John Rigby <jrigby@freescale.com>
2276 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
2277 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2278 Date: Tue Jan 15 13:48:52 2008 -0600
2280 ColdFire: Add MCF547x_8x dma code - 1
2282 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2283 Signed-off by: John Rigby <jrigby@freescale.com>
2285 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
2286 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2287 Date: Tue Jan 15 13:39:44 2008 -0600
2289 ColdFire: Add MCF547x_8x related header files
2291 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2292 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2293 Signed-off by: John Rigby <jrigby@freescale.com>
2295 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
2296 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2297 Date: Tue Jan 15 13:37:34 2008 -0600
2299 ColdFire: Add MCF547x_8x cpu arch
2301 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2302 Signed-off by: John Rigby <jrigby@freescale.com>
2304 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
2305 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2306 Date: Mon Jan 14 17:47:23 2008 -0600
2308 ColdFire: Add MCF5227x cpu and M52277EVB support-3
2310 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2311 Signed-off by: John Rigby <jrigby@freescale.com>
2313 commit c87581027994c148131b2f11aa75501f782ec19a
2314 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2315 Date: Mon Jan 14 17:46:19 2008 -0600
2317 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
2319 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2320 Signed-off by: John Rigby <jrigby@freescale.com>
2322 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
2323 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2324 Date: Mon Jan 14 17:43:33 2008 -0600
2326 ColdFire: Add MCF5227x cpu and M52277EVB support-1
2328 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2329 Signed-off by: John Rigby <jrigby@freescale.com>
2331 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
2332 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2333 Date: Mon Jan 14 17:35:44 2008 -0600
2335 ColdFire: Fix CFI Flash low level Read/Write macro
2337 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2338 Signed-off by: John Rigby <jrigby@freescale.com>
2340 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
2341 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2342 Date: Mon Jan 14 17:23:08 2008 -0600
2344 ColdFire: Add M5373EVB platform support - 2
2346 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2347 Signed-off by: John Rigby <jrigby@freescale.com>
2349 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
2350 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2351 Date: Mon Jan 14 17:19:54 2008 -0600
2353 ColdFire: Add M5373EVB platform support - 1
2355 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2356 Signed-off by: John Rigby <jrigby@freescale.com>
2358 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
2359 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2360 Date: Mon Jan 14 17:17:03 2008 -0600
2362 ColdFire: Update FlexBus CS for MCF532x
2364 Definition update and change from 16bit to 32bit
2366 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2367 Signed-off by: John Rigby <jrigby@freescale.com>
2369 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
2370 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2371 Date: Mon Jan 14 17:11:47 2008 -0600
2373 ColdFire: PCI and misc updates for MCF5445x
2375 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2376 Signed-off by: John Rigby <jrigby@freescale.com>
2378 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
2379 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2380 Date: Mon Jan 14 17:06:55 2008 -0600
2382 ColdFire: MCF5445x header files cleanup
2384 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2385 Signed-off by: John Rigby <jrigby@freescale.com>
2387 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
2388 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2389 Date: Mon Jan 14 16:59:42 2008 -0600
2391 ColdFire: MCF532x header files cleanup
2393 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2394 Signed-off by: John Rigby <jrigby@freescale.com>
2396 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
2397 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2398 Date: Mon Jan 14 15:30:15 2008 -0600
2400 ColdFire: Add modules header files
2402 Add CF specific modules header files
2404 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2405 Signed-off-by: John Rigby <jrigby@freescale.com>
2407 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
2408 Author: Kim Phillips <kim.phillips@freescale.com>
2409 Date: Thu Jan 17 12:48:00 2008 -0600
2411 codingstyle cleanup for spi driver
2413 ..and rm unused CONFIG_FSL_SPI define
2415 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2417 commit d59feffb42c9f174116db7a82a311df98983dfce
2418 Author: Haiying Wang <Haiying.Wang@freescale.com>
2419 Date: Wed Jan 16 17:12:12 2008 -0500
2421 FSL: Fix common EEPROM_data structure definition
2423 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
2424 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
2427 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2429 commit 6bee764bd6da510a4aad614880300c968bc7318d
2430 Author: Timur Tabi <timur@freescale.com>
2431 Date: Wed Jan 16 15:48:12 2008 -0600
2433 86xx: enable command-line editing
2435 Enable command-line editing for all MPC86xx boards.
2437 Signed-off-by: Timur Tabi <timur@freescale.com>
2439 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
2440 Author: Ben Warren <biggerbadderben@gmail.com>
2441 Date: Wed Jan 16 22:37:42 2008 -0500
2443 Implement hard SPI driver on MPC8349EMDS
2445 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
2446 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
2448 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2449 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2451 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
2452 Author: Ben Warren <biggerbadderben@gmail.com>
2453 Date: Wed Jan 16 22:37:35 2008 -0500
2455 Add support for a Freescale non-CPM SPI controller
2457 This patch adds support for the SPI controller found on Freescale PowerPC
2458 processors such as the MCP834x family. Additionally, a new config option,
2459 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
2461 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2462 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2464 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
2465 Author: Dave Liu <r63238@freescale.com>
2466 Date: Thu Jan 17 18:23:19 2008 +0800
2468 mpc83xx: Fix the fatal conflict of merge
2470 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
2471 will cause the mpc8315erdb board can't boot up.
2473 The patch fix that bug, and remove the duplicated #ifdef
2474 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
2477 Signed-off-by: Dave Liu <daveliu@freescale.com>
2478 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2480 commit 3259eeaa4148125a81417477f62c05bd67f60587
2481 Author: Larry Johnson <lrj@acm.org>
2482 Date: Thu Jan 17 08:50:09 2008 -0500
2484 Merge Sequoia beautification into Korat code
2486 Signed-off-by: Larry Johnson <lrj@acm.org>
2488 commit e16925773211291b562e77187061e9dd1d757217
2489 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2490 Date: Thu Jan 17 07:45:05 2008 +0100
2492 net: add 'ethrotate' environment variable
2494 [PATCH] net: add 'ethrotate' environment variable
2496 This patch replaces the buildtime configuration option
2497 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
2498 configuration veriable. See README.
2500 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2501 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2503 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
2504 Author: Stefan Roese <sr@denx.de>
2505 Date: Thu Jan 17 14:29:04 2008 +0100
2507 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
2509 Signed-off-by: Stefan Roese <sr@denx.de>
2511 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
2512 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2513 Date: Thu Jan 17 18:07:32 2008 +0900
2515 sh: Remove CONFIG_COMMANDS from MS7720SE config file
2517 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2519 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
2520 Author: Niklaus Giger <niklaus.giger@netstal.com>
2521 Date: Wed Jan 16 18:39:20 2008 +0100
2523 ppc4xx: Netstal HCU4 board: added various fixes and POST
2525 - Moved some common code to netstal/common/nm_bsp.c.
2526 - sdram initialisation goes go netstal/common/fixed_sdram.c.
2527 - Added support for POST.
2528 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
2530 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2532 commit 69b0634a4ee98c9791815600d43b99f626a952f3
2533 Author: Niklaus Giger <niklaus.giger@netstal.com>
2534 Date: Thu Jan 17 12:53:56 2008 +0100
2536 ppc4xx: netstal/common define routines used by all boards
2538 Added some routines used by all Netstal boards:
2539 - nm_bsp.c: - nm_show_print and
2540 - common_misc_init_r
2541 - set_params_for_sw_install. Very specific code to handle our SW
2542 installation procedure
2543 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
2544 to handle sdram initialization.
2545 - nm.h: Common header
2547 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2549 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
2550 Author: Niklaus Giger <niklaus.giger@netstal.com>
2551 Date: Wed Jan 16 18:39:18 2008 +0100
2553 ppc4xx: Netstal HCU5 board: added various fixes and POST
2555 - Moved some common code to nestal/common/nm_bsp.c.
2556 - Added support for the vxWorks EDR.
2557 - Enable trace for Lauterbach, if present.
2558 - Added support for POST.
2559 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
2561 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2563 commit 4371090e5da77edc7bf9f296364db4801639d9c4
2564 Author: Niklaus Giger <niklaus.giger@netstal.com>
2565 Date: Wed Jan 16 18:39:08 2008 +0100
2567 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
2570 - Reduced rom_size from 384 to 320 kB
2571 - Environment is now in flash
2575 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2577 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
2578 Author: Niklaus Giger <niklaus.giger@netstal.com>
2579 Date: Wed Jan 16 18:37:50 2008 +0100
2581 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
2584 - Reduced rom_size from 384 to 320 kB
2585 - Environment is now in flash
2589 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2591 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
2592 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2593 Date: Thu Jan 17 10:53:08 2008 +0100
2595 ppc4xx: Complete DU440 board support
2597 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2599 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
2600 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2601 Date: Thu Jan 17 10:52:30 2008 +0100
2603 ppc4xx: Add DU440 board support
2605 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2607 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
2608 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2609 Date: Thu Jan 17 15:53:52 2008 +0900
2611 sh: Update SuperH SCIF driver
2613 This patch fixed wrong SH7720 CPU macro and changed macro that
2614 calculated value of SCBRR register.
2616 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2618 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
2619 Author: Grzegorz Bernacki <gjb@semihalf.com>
2620 Date: Wed Jan 16 15:12:47 2008 +0100
2622 Set ips dividor to 1/4 of csb clock.
2624 Previous setting cause ips clock to be out of spec. This bug was found by John
2625 Rigby from Freescale.
2627 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2629 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
2630 Author: Kumar Gala <galak@kernel.crashing.org>
2631 Date: Thu Jan 17 02:19:18 2008 -0600
2633 85xx: Get ride of old TLB setup code
2635 Now that all boards have been converted, remove old config code and the
2636 config option for the new style.
2638 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2640 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
2641 Author: Kumar Gala <galak@kernel.crashing.org>
2642 Date: Thu Jan 17 02:02:10 2008 -0600
2644 85xx: Convert TQM85xx to new TLB setup
2646 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2648 commit 74121b470c14f7eaf284ee838bffca6f9521069e
2649 Author: Kumar Gala <galak@kernel.crashing.org>
2650 Date: Thu Jan 17 01:56:32 2008 -0600
2652 85xx: Convert STXGP3 & STXSSA to new TLB setup
2654 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2656 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
2657 Author: Kumar Gala <galak@kernel.crashing.org>
2658 Date: Thu Jan 17 01:44:34 2008 -0600
2660 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
2662 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2664 commit 818218bac6a11591e2542c344d2330e0f4e1968b
2665 Author: Kumar Gala <galak@kernel.crashing.org>
2666 Date: Thu Jan 17 01:31:34 2008 -0600
2668 85xx: Convert PM854/PM856 to new TLB setup
2670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2672 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
2673 Author: Kumar Gala <galak@kernel.crashing.org>
2674 Date: Thu Jan 17 01:25:33 2008 -0600
2676 85xx: Convert MPC8540EVAL to new TLB setup
2678 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2680 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
2681 Author: Kumar Gala <galak@kernel.crashing.org>
2682 Date: Thu Jan 17 01:12:22 2008 -0600
2684 85xx: Convert MPC8568 MDS to new TLB setup
2686 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2688 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
2689 Author: Kumar Gala <galak@kernel.crashing.org>
2690 Date: Thu Jan 17 01:01:09 2008 -0600
2692 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
2694 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2696 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
2697 Author: Kumar Gala <galak@kernel.crashing.org>
2698 Date: Thu Jan 17 00:52:29 2008 -0600
2700 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
2702 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2704 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
2705 Author: Kumar Gala <galak@kernel.crashing.org>
2706 Date: Thu Jan 17 00:32:17 2008 -0600
2708 85xx: Convert ATUM8548 to new TLB setup
2710 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2712 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
2713 Author: Kumar Gala <galak@kernel.crashing.org>
2714 Date: Wed Jan 16 23:11:57 2008 -0600
2716 85xx: Convert MPC8544 DS to new TLB setup
2718 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2720 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
2721 Author: Kumar Gala <galak@kernel.crashing.org>
2722 Date: Wed Jan 16 22:38:34 2008 -0600
2724 85xx: Reworked initial processor init
2726 Reworked the initial processor initialzation sequence:
2727 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
2728 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
2729 * Reworked initial asm code to do most of the core init before TLBs
2731 The main reasons for these changes are to allow handling of 36-bit phys
2732 addresses in the future and some of the issues that will exist when we
2735 There are a few caveats on what can be initialized via the LAW and TLB
2737 * TLB entry 14/15 can't be initialized via the TLB table
2738 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
2739 the code that is currently executing.
2741 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2743 commit 44a23cfd6360a68eaa41f945190618a55519eac3
2744 Author: Kumar Gala <galak@kernel.crashing.org>
2745 Date: Wed Jan 16 22:33:22 2008 -0600
2747 85xx: Introduce new tlb API
2749 Add a set of functions to manipulate TLB entries:
2750 * set_tlb() - write a tlb entry
2751 * invalidate_tlb() - invalidate a tlb array
2752 * disable_tlb() - disable a variable size tlb entry
2753 * init_tlbs() - setup initial tlbs based on static table
2755 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2757 commit be88b1699863c262818f3af7f60173b4d48df8fc
2758 Author: Stefan Roese <sr@denx.de>
2759 Date: Thu Jan 17 07:50:17 2008 +0100
2761 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
2763 Signed-off-by: Stefan Roese <sr@denx.de>
2765 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
2766 Author: Kumar Gala <galak@kernel.crashing.org>
2767 Date: Wed Jan 16 10:04:42 2008 -0600
2769 85xx: Use proper defines for PCI addresses
2771 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
2772 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
2773 be used for configuring the PCI ATMU.
2775 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2777 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
2778 Author: Kumar Gala <galak@kernel.crashing.org>
2779 Date: Wed Jan 16 09:22:29 2008 -0600
2781 85xx: Remove old style of LAW init
2783 All boards are now using the new fsl_law code so we can drop the old version.
2785 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2787 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
2788 Author: Kumar Gala <galak@kernel.crashing.org>
2789 Date: Wed Jan 16 09:15:29 2008 -0600
2791 85xx: convert remaining 85xx boards over to use new LAW init code
2793 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
2794 to use new LAW init code.
2796 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2798 commit 572b13afc42710f2957c382a710360429c0e099b
2799 Author: Kumar Gala <galak@kernel.crashing.org>
2800 Date: Wed Jan 16 09:11:53 2008 -0600
2802 85xx: convert STXGP3/STXSSA over to use new LAW init code
2804 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2806 commit 45f2166ac0233a9263058378f39612bd11f61196
2807 Author: Kumar Gala <galak@kernel.crashing.org>
2808 Date: Wed Jan 16 09:06:48 2008 -0600
2810 85xx: convert PM854/PM856 over to use new LAW init code
2812 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2814 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
2815 Author: Kumar Gala <galak@kernel.crashing.org>
2816 Date: Wed Jan 16 09:05:27 2008 -0600
2818 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
2820 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2822 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
2823 Author: Kumar Gala <galak@kernel.crashing.org>
2824 Date: Wed Jan 16 01:45:10 2008 -0600
2826 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
2828 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2830 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
2831 Author: Kumar Gala <galak@kernel.crashing.org>
2832 Date: Wed Jan 16 01:32:06 2008 -0600
2834 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
2836 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2838 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
2839 Author: Kumar Gala <galak@kernel.crashing.org>
2840 Date: Wed Jan 16 01:16:16 2008 -0600
2842 85xx: convert MPC8544 DS over to use new LAW init code
2844 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2846 commit 83d40dfd79fe868796275802f60116d84b9e4395
2847 Author: Kumar Gala <galak@kernel.crashing.org>
2848 Date: Wed Jan 16 01:13:58 2008 -0600
2850 85xx: Move LAW init code into C
2852 Move the initialization of the LAWs into C code and provide an API
2853 to allow modification of LAWs after init.
2855 Board code is responsible to provide a law_table and num_law_entries.
2857 We should be able to use the same code on 86xx as well.
2859 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2861 commit bed8ce838a609aaab136d43b25e6df2a520bc854
2862 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2863 Date: Sat Dec 22 15:03:12 2007 +0100
2865 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
2867 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2869 commit 0764c164fed6277d359cf132d55187ea34290114
2870 Author: Vlad Lungu <vlad@comsys.ro>
2871 Date: Wed Jan 16 19:27:51 2008 +0200
2873 MIPS:Target support for qemu -M mips
2875 With serial, NE2000, IDE support. Tested in big-endian mode.
2876 Memory size hard-coded to 128M for now, so don't play with
2879 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2881 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
2882 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2883 Date: Fri Jan 11 00:01:37 2008 +0100
2885 Fix nfs command help to reflect that the serverip is optional
2887 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2888 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2890 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
2891 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2892 Date: Mon Dec 10 22:32:14 2007 +0100
2894 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
2896 and move is_valid_ether_addr board file
2898 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2899 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2901 commit c2f896b8fc4722e36915903e1942e138e68ce804
2902 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2903 Date: Wed Jan 16 16:13:31 2008 +0900
2905 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
2907 rx_status on the memory is basically in LE, but needs to be handled in CPU
2908 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
2911 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2912 Cc: Masami Komiya <mkomiya@sonare.it>
2913 Cc: Lucas Jin <lucasjin@gmail.com>
2914 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2916 commit 96a236746fe6a7b84802afb4ed31536696d34812
2917 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2918 Date: Wed Jan 16 16:12:26 2008 +0900
2920 drivers/net/rtl8139.c: Fix cache coherency issues
2922 Current driver is meant for cache coherent systems. This patch adds
2923 flush_cache() routines to support cache non-coherent systems.
2925 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2926 Cc: Masami Komiya <mkomiya@sonare.it>
2927 Cc: Lucas Jin <lucasjin@gmail.com>
2928 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2930 commit d1276c76c1e2b5035296689280ba1acb2c425104
2931 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2932 Date: Wed Jan 16 16:11:14 2008 +0900
2934 drivers/net/rtl8139.c: Fix tx timeout
2936 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
2937 does, the condition "(currticks() < to)" becomes invalid and immediately
2938 leads to tx timeout error. This patch introduces the fine-graded udely(10)
2939 loops to ease the impact of wrapping around.
2941 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2942 Cc: Masami Komiya <mkomiya@sonare.it>
2943 Cc: Lucas Jin <lucasjin@gmail.com>
2944 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2946 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
2947 Author: Dave Liu <r63238@freescale.com>
2948 Date: Fri Jan 11 18:45:28 2008 +0800
2950 TSEC: Add the support for RealTek RTL8211B PHY
2952 Add the support of RealTek RTL8211B PHY, the RTL8211B
2953 PHY only supports RGMII and MII mode.
2955 Signed-off-by: Dave Liu <daveliu@freescale.com>
2956 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2958 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
2959 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2960 Date: Wed Jan 16 09:40:41 2008 +0100
2962 Remove annoying debug printout for PHY less boards.
2964 PHY less board prints out lots of "read wrong ...":
2965 read wrong value : mii_id 3,mii_reg 2, base e0102320
2966 read wrong value : mii_id 3,mii_reg 3, base e0102320
2967 UEC: PHY is Generic MII (ffffffff)
2968 read wrong value : mii_id 3,mii_reg 4, base e0102320
2969 read wrong value : mii_id 3,mii_reg 0, base e0102320
2970 read wrong value : mii_id 3,mii_reg 1, base e0102320
2971 read wrong value : mii_id 3,mii_reg 1, base e0102320
2972 read wrong value : mii_id 3,mii_reg 5, base e0102320
2973 read wrong value : mii_id 3,mii_reg 1, base e0102320
2974 read wrong value : mii_id 3,mii_reg 1, base e0102320
2975 read wrong value : mii_id 3,mii_reg 5, base e0102320
2976 FSL UEC0: Full Duplex
2977 FSL UEC0: Speed 100BT
2978 FSL UEC0: Link is up
2979 Using FSL UEC0 device
2981 Make this printout depend on UEC_VERBOSE_DEBUG and
2982 remove its definition in uec_phy.c
2984 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2985 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2987 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
2988 Author: Kim Phillips <kim.phillips@freescale.com>
2989 Date: Tue Jan 15 14:11:00 2008 -0600
2991 net: reduce boot latency on QE UEC based boards
2993 actually polling for PHY autonegotiation to finish enables us to remove the
2994 5 second boot prompt latency present on QE based boards.
2996 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
2997 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
2998 code shamelessly stolen from tsec driver.
3000 also rm unused CONFIG_RMII_MODE code.
3002 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3003 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
3004 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3006 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
3007 Author: michael.firth@bt.com <michael.firth@bt.com>
3008 Date: Wed Jan 16 11:40:51 2008 +0000
3010 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
3012 The current TSEC driver limits MDIO access to the devices that have been configured as attached
3013 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
3015 Signed-off-by: Michael Firth <michael.firth@bt.com>
3016 Acked-by: Andy Fleming <afleming@freescale.com>
3017 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3019 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
3020 Author: Kim Phillips <kim.phillips@freescale.com>
3021 Date: Wed Jan 16 00:38:05 2008 -0600
3023 Add support for the MPC837xERDB
3025 MPC837xERDB board support includes:
3026 * DDR2 330MHz hardcoded (soldered on the board)
3027 * Local Bus NOR Flash
3029 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
3030 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
3033 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
3034 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
3035 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3037 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
3038 Author: Kim Phillips <kim.phillips@freescale.com>
3039 Date: Wed Jan 16 12:06:16 2008 -0600
3041 mpc83xx: add support for more system clock performance controls
3043 System registers that are modified are the Arbiter Configuration
3044 Register (ACR), the System Priority Control Register (SPCR), and the
3045 System Clock Configuration Register (SCCR).
3047 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
3048 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
3049 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3051 commit 16c3cde050e2d243e62b37486f1558570787beb8
3052 Author: James Yang <james.yang@freescale.com>
3053 Date: Wed Jan 16 11:58:08 2008 -0600
3055 FSL: Generalize PIXIS reset command parsing.
3057 Before, the order of arguments to the pixis_reset
3058 command needed to be supplied in a hard-coded order.
3059 Generalize the command parsing to allow any order.
3061 Signed-off-by: James Yang <james.yang@freescale.com>
3062 Acked-by: Jon Loeliger <jdl@freescale.com>
3064 commit ad8f8687b78c3e917b173f038926695383c55555
3065 Author: Jon Loeliger <jdl@freescale.com>
3066 Date: Tue Jan 15 13:42:41 2008 -0600
3068 FSL: Convert board/freescale/common/Makefile to use CONFIG_
3070 Convert the board/freescale/common/Makefile to use
3071 CONFIG_* options to select which files to conditionally
3072 compile into the board/freescale/common library rather
3073 than conditionally compiling entire files.
3080 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
3082 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3084 commit 7c2221eb230372a9e537c4f6636b147b0909325f
3085 Author: Roy Zang <tie-fei.zang@freescale.com>
3086 Date: Tue Jan 15 16:38:38 2008 +0800
3088 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
3090 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
3091 Remove unused ethernet CONFIG_ options.
3093 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
3094 Acked-by: Jon Loeliger <jdl@freescale.com>
3096 commit 711a7946277d2e29af481011e8635e9975c54e45
3097 Author: Kim Phillips <kim.phillips@freescale.com>
3098 Date: Tue Jan 15 14:05:14 2008 -0600
3100 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
3102 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
3104 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3106 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
3107 Author: Kim Phillips <kim.phillips@freescale.com>
3108 Date: Tue Jan 15 09:51:12 2008 -0600
3110 mpc83xx: clean up mpc8360emds.c warnings
3112 mpc8360emds.c: In function 'ft_board_setup':
3113 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
3114 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
3115 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
3116 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
3117 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
3118 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
3120 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3122 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
3123 Author: Kim Phillips <kim.phillips@freescale.com>
3124 Date: Mon Jan 14 16:14:46 2008 -0600
3126 mpc83xx: fix phy-connection-type fixup code
3128 use tree passed to us in local blob, not global fdt.
3130 Also use fdt_path_offset to convert to relative offset, since absolute
3131 reference is needed to check for rgmii-id mode string value.
3133 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3135 commit 2b4c952be7c4357a13e839d48df80853820c33eb
3136 Author: Kumar Gala <galak@kernel.crashing.org>
3137 Date: Mon Jan 14 09:01:40 2008 -0600
3139 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
3141 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3142 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3144 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
3145 Author: Poonam Aggrwal <b10812@freescale.com>
3146 Date: Mon Jan 14 09:41:14 2008 +0530
3148 Changes in uboot DDR configuration for MPC8313eRDB
3150 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
3151 DDR configuration in u-boot code. Some are related to performance, some
3152 affect stability and some correct few basic errors in the current
3155 The changes have been tested and found to give better memory latency
3156 figures on MPC8313eRDB.LMBench figures prove it.
3160 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
3161 (this may improve performance for application with many read
3162 or write to open pages).
3163 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
3164 001 (activating all the CS when only one is used may cause
3165 unwanted noise on the system)
3167 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
3169 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
3171 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
3172 comply with the 3 ODT clk requirements)
3173 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
3174 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
3176 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
3177 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
3179 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
3180 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
3182 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
3183 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
3185 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
3186 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
3187 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
3188 Cc: Josep P J <PJ.Joseph@freescale.com>
3189 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3191 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
3192 Author: Jerry Van Baren <gvb.uboot@gmail.com>
3193 Date: Sat Jan 12 13:24:14 2008 -0500
3195 Enable the isdram command on the MPC8360EMDS board
3197 The isdram command prints out decoded information the "serial presence
3198 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
3199 debugging memory configuration problems.
3201 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3202 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3204 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
3205 Author: Dave Liu <r63238@freescale.com>
3206 Date: Fri Jan 11 18:48:24 2008 +0800
3208 mpc83xx: Add the support for MPC8315ERDB board
3211 - Boot from NOR Flash
3212 - DDR2 266MHz hardcoded configuration
3213 - Local bus NOR Flash R/W operation
3214 - I2C, UART, MII and RTC
3218 Signed-off-by: Dave Liu <daveliu@freescale.com>
3219 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3221 commit b05884efa614e4d8a9413158fc228e0dc02ab704
3222 Author: Dave Liu <r63238@freescale.com>
3223 Date: Fri Jan 11 18:46:50 2008 +0800
3225 mpc83xx: Add config of eTSEC emergency priority in SPCR
3227 The TSEC emergency priority definition of 831x/837x
3228 is different than the definition of 834x in SPCR register.
3230 Add the other config of TSEC emergency priority into
3233 Signed-off-by: Dave Liu <daveliu@freescale.com>
3234 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3236 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
3237 Author: Dave Liu <r63238@freescale.com>
3238 Date: Fri Jan 11 18:42:19 2008 +0800
3240 mpc83xx: Remove cache config from MPC8360ERDK.h
3242 The MPC8360ERDK board support patch is added before
3243 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
3244 so, miss clean up it.
3246 The patch clean up the miss cache config.
3248 Signed-off-by: Dave Liu <daveliu@freescale.com>
3249 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3251 commit cd9d23053d435c08fc8695017b5cb9003fcda786
3252 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3253 Date: Mon Jan 14 23:09:32 2008 +0300
3255 nand: FSL UPM NAND driver
3257 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3259 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
3260 Author: Kyungmin Park <kmpark@infradead.org>
3261 Date: Tue Jan 15 08:59:44 2008 +0900
3263 OneNAND: Separate U-Boot dependent code from OneNAND
3265 OneNAND: Separate U-Boot dependent code from OneNAND
3267 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3269 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
3270 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3271 Date: Wed Jan 16 10:33:46 2008 +0100
3273 ppc4xx: Sequoia coding style cleanup and beautification
3275 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3277 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
3278 Author: Larry Johnson <lrj@acm.org>
3279 Date: Tue Jan 15 14:35:58 2008 -0500
3281 ppc4xx: Refactor ECC POST for AMCC Denali core
3283 The ECC POST reported intermittent failures running after power-up on
3284 the Korat PPC440EPx board. Even when the test passed, the debugging
3285 output occasionally reported additional unexpected ECC errors.
3287 This refactoring has three main objectives: (1) minimize the code
3288 executed with ECC enabled during the tests, (2) add more checking of the
3289 results so any unexpected ECC errors would cause the test to fail, and
3290 (3) use synchronization (only) where required by the processor.
3292 Signed-off-by: Larry Johnson <lrj@acm.org>
3294 commit 2465665b73ac2f688af945b1ed510752afa816a4
3295 Author: David Saada <David.Saada@ecitele.com>
3296 Date: Tue Jan 15 10:40:24 2008 +0200
3298 QE UEC: Extend number of supported UECs to 4
3300 This patch extends the number of supported UECs to 4. Note that the
3301 problem of QE thread resources exhaustion is resolved by setting the
3302 correct number of QE threads according to Ethernet type (GBE or FE).
3304 Signed-off-by: David Saada <david.saada@ecitele.com>
3305 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3307 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
3308 Author: Wolfgang Denk <wd@denx.de>
3309 Date: Wed Jan 16 00:01:01 2008 +0100
3311 LWMON5: enable hush shell as command line parser
3313 Signed-off-by: Wolfgang Denk <wd@denx.de>
3315 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
3316 Author: Wolfgang Denk <wd@denx.de>
3317 Date: Tue Jan 15 17:22:28 2008 +0100
3319 ADS5121: disable watchdog; enable image timestamps
3321 Signed-off-by: Wolfgang Denk <wd@denx.de>
3323 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
3324 Author: Wolfgang Denk <wd@denx.de>
3325 Date: Tue Jan 15 17:21:28 2008 +0100
3327 TK885D: fixes for bigger flash sector sizes on new modules;
3328 adjust default environment;
3329 disable SCC ethernet (not used on this board).
3331 Signed-off-by: Wolfgang Denk <wd@denx.de>
3333 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
3334 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3335 Date: Tue Jan 15 17:48:13 2008 +0900
3337 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
3339 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3341 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
3342 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3343 Date: Tue Jan 15 23:25:25 2008 +0900
3345 sh: Add support SH7710/SH7712
3347 SH7710/SH7712 of SH3 CPU are supported.
3348 SH771X is called SH-Ether, and has the Ether controller in CPU.
3349 The driver of Ether is not included in this patch.
3351 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3353 commit 63a11be68306870e04d3851ed9fa41955cdf4894
3354 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3355 Date: Tue Jan 15 23:06:17 2008 +0900
3357 sh: Add support of map_physmem() and unmap_physmem() to SuperH
3359 This patch add the support of map_physmem() and unmap_physmem()
3360 used with Common Flash Interface(CFI) driver.
3362 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3364 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
3365 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3366 Date: Wed Jan 9 14:42:27 2008 +0900
3368 sh: Add maintainer of MS7720SE to the MAINTAINER file
3370 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3372 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
3373 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3374 Date: Wed Jan 9 14:39:58 2008 +0900
3376 sh: Fix board name in MS7720SE's config.mk
3378 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3380 commit c0a04d93734d768b39dbb72fb501b65614c8615d
3381 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3382 Date: Wed Jan 9 14:37:36 2008 +0900
3384 sh: Add MS7720SE to MAKEALL
3386 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3388 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
3389 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3390 Date: Mon Dec 3 22:58:50 2007 +0900
3392 sh: Add support for MS7720RP02 board
3394 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3395 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3396 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3398 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
3399 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3400 Date: Wed Jan 9 14:30:02 2008 +0900
3402 sh: Add support for SH7720 in serial_sh driver.
3404 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3405 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3406 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3408 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
3409 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3410 Date: Mon Dec 3 22:58:45 2007 +0900
3412 sh: Add support SH3 and SH7720
3414 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3415 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3416 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3418 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
3419 Author: Stefan Roese <sr@denx.de>
3420 Date: Tue Jan 15 10:11:02 2008 +0100
3422 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
3424 Signed-off-by: Stefan Roese <sr@denx.de>
3426 commit 17bef68097ab3692500a36fb31115bff7910aa99
3427 Author: Niklaus Giger <niklausgiger@gmx.ch>
3428 Date: Mon Jan 14 14:04:42 2008 +0100
3430 ppc_4xx: Fix post spr.c for PPC405
3432 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
3433 for PPC440 and derivates processor.
3435 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3437 commit 06c428bcd4413014b43236e77765022071424fa6
3438 Author: Dave Liu <r63238@freescale.com>
3439 Date: Mon Jan 14 11:12:01 2008 +0800
3441 QE: fix compile warning
3443 qe.c: In function 'qe_upload_firmware':
3444 qe.c:390: warning: pointer targets in passing argument 2
3445 uec.c: In function 'uec_initialize':
3446 uec.c:1236: warning: 'uec_info' may be used uninitialized
3448 Signed-off-by: Dave Liu <daveliu@freescale.com>
3450 commit a0dd99d51efa55fe023e19c97ead92683725eb11
3451 Author: Stefan Roese <sr@denx.de>
3452 Date: Mon Jan 14 10:05:05 2008 +0100
3454 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
3456 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
3457 to remove the USB PHY reset after powerup. The CPLD will keep the
3458 USB PHY in reset (active low) until the bit is set to 1 in
3459 board_early_init_f().
3461 Signed-off-by: Stefan Roese <sr@denx.de>
3463 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
3464 Author: Wolfgang Denk <wd@denx.de>
3465 Date: Sun Jan 13 23:26:45 2008 +0100
3467 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
3469 Signed-off-by: Wolfgang Denk <wd@denx.de>
3471 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
3472 Author: Wolfgang Denk <wd@denx.de>
3473 Date: Sun Jan 13 23:37:50 2008 +0100
3475 ADS5121: Fix typo in ads5121.c, adjust default environment
3477 Signed-off-by: Wolfgang Denk <wd@denx.de>
3479 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
3480 Author: John Rigby <jrigby@freescale.com>
3481 Date: Fri Aug 24 18:18:43 2007 -0600
3483 ADS5121: MAX slew rate for PATA pins
3485 Signed-off-by: John Rigby <jrigby@freescale.com>
3487 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
3488 Author: Wolfgang Denk <wd@denx.de>
3489 Date: Sun Jan 13 21:05:52 2008 +0100
3491 Fix Makefile dependency problem with parallel builds.
3493 Signed-off-by: Wolfgang Denk <wd@denx.de>
3495 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
3496 Author: Wolfgang Denk <wd@denx.de>
3497 Date: Sun Jan 13 19:51:39 2008 +0100
3499 MPC8544DS: fix board Makefile for silent build (with -s)
3501 Signed-off-by: Wolfgang Denk <wd@denx.de>
3503 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
3504 Author: Wolfgang Denk <wd@denx.de>
3505 Date: Sun Jan 13 16:44:08 2008 +0100
3507 PMC440 board: fix board Makefile for out-of-tree building
3509 Signed-off-by: Wolfgang Denk <wd@denx.de>
3511 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
3512 Author: Wolfgang Denk <wd@denx.de>
3513 Date: Sun Jan 13 16:07:44 2008 +0100
3515 Makalu: fix compile warning
3517 Signed-off-by: Wolfgang Denk <wd@denx.de>
3519 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
3520 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3521 Date: Sun Jan 13 12:36:12 2008 +0100
3523 cmd_nand : fix compiler warning.
3525 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3527 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
3528 Author: Michael Schwingen <rincewind@discworld.dascon.de>
3529 Date: Sat Jan 12 20:29:47 2008 +0100
3531 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
3533 Signed-off-by: Michael Schwingen <michael@schwingen.org>
3534 Acked-by: Stefan Roese <sr@denx.de>
3536 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
3537 Author: Wolfgang Denk <wd@denx.de>
3538 Date: Sun Jan 13 02:19:44 2008 +0100
3540 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
3542 Signed-off-by: Wolfgang Denk <wd@denx.de>
3544 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
3545 Author: Wolfgang Denk <wd@denx.de>
3546 Date: Sun Jan 13 02:19:13 2008 +0100
3548 MPC8xx FEC driver: fix compiler warning.
3550 Signed-off-by: Wolfgang Denk <wd@denx.de>
3552 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
3553 Author: Wolfgang Denk <wd@denx.de>
3554 Date: Sun Jan 13 00:59:21 2008 +0100
3556 Fix Makefile dependencies issues; allow silent build
3558 - get rid of "version" target whichdidn't really work
3559 - make autoconf.mk depend on version_autogenerated.h to make sure
3560 to rebuild files as needed
3561 - add XECHO macro to allow for silent build using "make -s"
3563 Signed-off-by: Wolfgang Denk <wd@denx.de>
3565 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
3566 Author: Wolfgang Denk <wd@denx.de>
3567 Date: Sun Jan 13 00:55:47 2008 +0100
3569 ADS5121e: fix compile warning
3571 Signed-off-by: Wolfgang Denk <wd@denx.de>
3573 commit f2b6f4610627fe3d607620e25082916a01538875
3574 Author: Wolfgang Denk <wd@denx.de>
3575 Date: Sun Jan 13 00:55:18 2008 +0100
3577 MUNICes: fix board Makefile for remote build directory
3579 Signed-off-by: Wolfgang Denk <wd@denx.de>
3581 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
3582 Author: Oliver Weber <almoeli@gmx.de>
3583 Date: Wed Jan 9 17:04:38 2008 +0100
3585 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
3587 Signed-off-by: Oliver Weber <almoeli@gmx.de>
3589 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
3590 Author: Andreas Engel <andreas.engel@ericsson.com>
3591 Date: Wed Jan 9 17:10:56 2008 +0100
3593 Make bootretry work when command line editing is enabled
3595 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
3596 This patch fixes the problem.
3598 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
3600 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
3601 Author: Larry Johnson <lrj@acm.org>
3602 Date: Fri Jan 11 23:26:18 2008 -0500
3604 Refactor code for "i2c sdram" command
3606 Signed-off-by: Larry Johnson <lrj@acm.org>
3608 commit 0df6b8446c4721b91ce311548114891130371083
3609 Author: Larry Johnson <lrj@acm.org>
3610 Date: Thu Jan 10 22:23:39 2008 -0500
3612 Fix "i2c sdram" command for DDR2 DIMMs
3614 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
3615 "i2c sdram" command. This patch provides correct alternative
3616 interpretations when DDR2 memory is detected.
3618 Signed-off-by: Larry Johnson <lrj@acm.org>
3620 commit 64134f011254123618798ff77c42ba196b2ec485
3621 Author: Wolfgang Denk <wd@denx.de>
3622 Date: Sat Jan 12 20:31:39 2008 +0100
3624 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
3626 With recent toolchain versions, some boards would not build because
3627 or errors like this one (here for ocotea board when building with
3629 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
3631 For many boards, the .bss section is big enough that it wraps around
3632 at the end of the address space (0xFFFFFFFF), so the problem will not
3633 be visible unless you use a 64 bit tool chain for development. On
3634 some boards however, changes to the code size (due to different
3635 optimizations) we bail out with section overlaps like above.
3637 The fix is to add the NOLOAD attribute to the .bss and .sbss
3638 sections, telling the linker that .bss does not consume any space in
3641 Signed-off-by: Wolfgang Denk <wd@denx.de>
3643 commit 3afac79ec27b91df185f090b31dad9620779f440
3644 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3645 Date: Fri Jan 11 20:42:58 2008 -0600
3647 USB: Add Philips 1561 PCI-OHCI ids
3648 (needed for M5475EVB)
3650 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
3652 commit 5e8def6731cd7bec74bff42a16b139de04010353
3653 Author: Wolfgang Denk <wd@denx.de>
3654 Date: Sat Jan 12 15:51:34 2008 +0100
3656 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
3659 Signed-off-by: Heiko Schocher <hs@denx.de>
3660 Signed-off-by: Wolfgang Denk <wd@denx.de>
3662 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
3663 Author: Grzegorz Bernacki <gjb@semihalf.com>
3664 Date: Fri Jan 11 12:03:43 2008 +0100
3666 MPC512X: Cleanup bus clock names.
3668 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3670 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
3671 Author: Grzegorz Bernacki <gjb@semihalf.com>
3672 Date: Tue Jan 8 17:16:59 2008 +0100
3674 MPC512X: Fixed typo in macro name.
3676 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3678 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
3679 Author: Grzegorz Bernacki <gjb@semihalf.com>
3680 Date: Tue Jan 8 17:16:15 2008 +0100
3682 ads5121: Added support for FDT.
3684 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3686 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
3687 Author: Wolfgang Denk <wd@denx.de>
3688 Date: Sat Jan 12 01:05:50 2008 +0100
3690 Coding Style cleanup; update CHANGELOG.
3692 Signed-off-by: Wolfgang Denk <wd@denx.de>
3694 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
3695 Author: Heiko Schocher <hs@denx.de>
3696 Date: Fri Jan 11 15:15:17 2008 +0100
3698 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
3700 Signed-off-by: Timur Tabi <timur@freescale.com>
3701 Signed-off-by: Heiko Schocher <hs@denx.de>
3703 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
3704 Author: Heiko Schocher <hs@denx.de>
3705 Date: Fri Jan 11 15:15:16 2008 +0100
3707 MUNICes: Set the right CFG_DEFAULT_MBAR value.
3709 Signed-off-by: Heiko Schocher <hs@denx.de>
3711 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
3712 Author: Heiko Schocher <hs@denx.de>
3713 Date: Fri Jan 11 15:15:15 2008 +0100
3715 added the config File for the MUNICes board.
3717 Signed-off-by: Heiko Schocher <hs@denx.de>
3719 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
3720 Author: Heiko Schocher <hs@denx.de>
3721 Date: Fri Jan 11 15:15:14 2008 +0100
3723 added basic support for the MUNICes board.
3725 Signed-off-by: Heiko Schocher <hs@denx.de>
3727 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
3728 Author: Wolfgang Denk <wd@denx.de>
3729 Date: Sat Jan 12 00:39:37 2008 +0100
3731 Update CHANGELOG and MAINTAINERS files.
3733 Signed-off-by: Wolfgang Denk <wd@denx.de>
3735 commit 5ba7390c3cb579172be66888a371707b47b5be4e
3736 Author: Anatolij Gustschin <agust@denx.de>
3737 Date: Fri Jan 11 02:15:02 2008 +0100
3739 Fix compilation problem in common/cmd_bmp.c
3741 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
3742 isn't defined. This patch fix this.
3744 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3746 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
3747 Author: Heiko Schocher <hs@denx.de>
3748 Date: Fri Jan 11 01:12:09 2008 +0100
3750 Fix defaultconfig for the mgcoge board.
3752 Signed-off-by: Heiko Schocher <hs@denx.de>
3754 commit ac9db066b26935f31bff15c98168b19faeb603f3
3755 Author: Heiko Schocher <hs@denx.de>
3756 Date: Fri Jan 11 01:12:08 2008 +0100
3758 Added support for the mgcoge board from keymile.
3760 Signed-off-by: Heiko Schocher <hs@denx.de>
3762 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
3763 Author: Heiko Schocher <hs@denx.de>
3764 Date: Fri Jan 11 01:12:07 2008 +0100
3766 Enable SMC microcode relocation patch for SMC1.
3768 Signed-off-by: Heiko Schocher <hs@denx.de>
3770 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
3771 Author: Heiko Schocher <hs@denx.de>
3772 Date: Fri Jan 11 01:12:06 2008 +0100
3774 Added support for the mgsuvd board from keymile.
3776 Signed-off-by: Heiko Schocher <hs@denx.de>
3778 commit bf05293973b348f6946c9df92cd3c65ece42d0be
3779 Author: James Yang <james.yang@freescale.com>
3780 Date: Thu Jan 10 16:02:07 2008 -0600
3782 Fix 64-bit vsprintf.
3784 There were some size and unsigned problems.
3785 Also add support for "ll" size modifier in format string like glibc
3787 Signed-off-by: James Yang <James.Yang@freescale.com>
3788 Acked-by: Jon Loeliger <jdl@freescale.com>
3790 commit 92fa37eac530860643afa26ae347af3d23d67309
3791 Author: Larry Johnson <lrj@acm.org>
3792 Date: Wed Jan 9 12:42:35 2008 -0500
3794 Remove superfluous preprocessor conditionals from LM73 driver
3796 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
3798 (2) Use conditional Makefile.o.
3800 Signed-off-by: Larry Johnson <lrj@acm.org>
3802 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
3803 Author: Guennadi Liakhovetski <lg@denx.de>
3804 Date: Thu Jan 10 17:59:07 2008 +0100
3806 Add support for the TK885D baseboard from TELE-DATA
3808 The TK885D board uses a TQM885D module from TQ, this port adds an
3809 own configuration file and adds a last_stage_init() method to
3810 configure the two PHYs, depending on the phy_auto_nego environment
3813 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3815 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
3816 Author: Kumar Gala <galak@kernel.crashing.org>
3817 Date: Thu Jan 10 02:22:05 2008 -0600
3819 Fix compiler warning
3821 main.c: In function 'readline_into_buffer':
3822 main.c:927: warning: unused variable 'p_buf'
3824 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3826 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
3827 Author: Anatolij Gustschin <agust@denx.de>
3828 Date: Fri Jan 11 14:30:01 2008 +0100
3830 Add Fujitsu CoralP/Lime video driver
3832 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3833 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
3835 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
3836 Author: Anatolij Gustschin <agust@denx.de>
3837 Date: Fri Jan 11 02:39:47 2008 +0100
3839 Fix video console newline and carriage return handling
3841 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
3842 are not displayed correctly. This is an attempt to fix
3843 this issue. Also add carriage return handling.
3845 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3846 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
3848 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
3849 Author: Stefan Roese <sr@denx.de>
3850 Date: Fri Jan 11 15:53:58 2008 +0100
3852 ppc4xx: Fix sdram init on Sequoia boards
3854 Clear possible errors in MCSR resulting from data-eye-search.
3855 If not done, then we could get an interrupt later on when
3856 exceptions are enabled.
3858 Signed-off-by: Stefan Roese <sr@denx.de>
3860 commit d610a60730b7464f6f659db49d264d89a7c71061
3861 Author: Anatolij Gustschin <agust@denx.de>
3862 Date: Fri Jan 11 15:31:09 2008 +0100
3864 ppc4xx: Rework Lime support for lwmon5
3866 Rework Lime support for lwmon5 using new video driver
3868 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3870 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
3871 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3872 Date: Fri Jan 11 14:55:16 2008 +0100
3874 ppc4xx: Update PMC440 config file
3876 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3878 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
3879 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3880 Date: Fri Jan 11 14:55:08 2008 +0100
3882 ppx4xx: Fix sdram init on PMC440 boards
3884 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3886 commit 061aad4d320dddce26247699dcf2875ee2ea1366
3887 Author: Dave Liu <r63238@freescale.com>
3888 Date: Thu Jan 10 23:09:33 2008 +0800
3890 mpc83xx: Fix the bug of 266MHz data rate DDR
3892 The DDR doesn't work on the 266MHz data rate,
3893 the patch fix the bug.
3895 Signed-off-by: Dave Liu <daveliu@freescale.com>
3896 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3898 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
3899 Author: Dave Liu <r63238@freescale.com>
3900 Date: Thu Jan 10 23:08:26 2008 +0800
3902 mpc83xx: Make the code more readable
3904 Format the code, make it more readable
3906 Signed-off-by: Dave Liu <daveliu@freescale.com>
3907 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3909 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
3910 Author: Dave Liu <r63238@freescale.com>
3911 Date: Thu Jan 10 23:07:23 2008 +0800
3913 mpc83xx: Reduce the latency of DDR
3915 Reduce the AL from 2 to 1 clock to improve the performance.
3917 Signed-off-by: Dave Liu <daveliu@freescale.com>
3918 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3920 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
3921 Author: Dave Liu <r63238@freescale.com>
3922 Date: Thu Jan 10 23:06:05 2008 +0800
3924 mpc83xx: Fix the wrong definition of MPC8315E
3926 According to the latest user manual of MPC8315E,
3927 1) The SVCOD of HRCWL is different than 837x
3928 2) The SCCR has changes
3930 Signed-off-by: Dave Liu <daveliu@freescale.com>
3931 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3933 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
3934 Author: Dave Liu <r63238@freescale.com>
3935 Date: Thu Jan 10 23:05:00 2008 +0800
3937 mpc83xx: Fix the typo in mpc83xx.h
3939 The SPCR about TSEC priority is wrong.
3941 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
3942 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
3943 Signed-off-by: Dave Liu <daveliu@freescale.com>
3944 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3946 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
3947 Author: Dave Liu <r63238@freescale.com>
3948 Date: Thu Jan 10 23:04:13 2008 +0800
3950 mpc83xx: Fix the typo in global data struct
3952 Fix the typo in global_data.h
3954 Signed-off-by: Dave Liu <daveliu@freescale.com>
3955 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3957 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
3958 Author: Dave Liu <r63238@freescale.com>
3959 Date: Thu Jan 10 23:03:03 2008 +0800
3961 mpc83xx: Remove cache config from config.h
3963 clean up the cache config from configs.h of board
3965 Signed-off-by: Dave Liu <daveliu@freescale.com>
3966 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3968 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
3969 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3970 Date: Wed Jan 9 20:57:47 2008 +0300
3972 mpc83xx: add support for the MPC8360E-RDK
3974 This is MPC8360E based board with:
3975 - 256MB fixed SDRAM;
3976 - 8MB Intel Strata NOR flash;
3977 - StMICRO 64MiB NAND flash;
3978 - two 10/100/1000 ethernet ports connected via Broadcom
3980 - two 10/100 ethernet ports connected via National
3982 - one PCI and one miniPCI slots;
3983 - four serial ports (two NS16550-compatible, two UCCs);
3984 - four USB ports working through MPC8360E "FHCI" USB controller;
3985 - Fujitsu MB86277 graphics controller;
3986 - Analog to Digital Converter/Touchscreen controller, AD7843
3989 Features not supported in this patch are:
3990 - StMICRO 64MiB NAND flash (patch sent);
3991 - MINT framebuffer initialization (patch is pending);
3992 - Fetching production information from the EEPROM via I2C;
3994 - Two slow UCCs used as RS-485 UARTs.
3996 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3997 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3999 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
4000 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4001 Date: Wed Jan 9 20:57:40 2008 +0300
4003 mpc83xx: add "fsl, qe" compatible fixups
4005 New device trees will use "fsl,qe" compatible properties.
4007 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4008 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4010 commit 977b57583a7c34010e566a09a679ec3c1836f996
4011 Author: Kim Phillips <kim.phillips@freescale.com>
4012 Date: Wed Jan 9 15:24:06 2008 -0600
4014 mpc83xx: add missing CONFIG_HAS_ETH0 defines
4016 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
4017 is defined; add the define to the missing board configs.
4019 Thanks to Emilian Medve for finding this.
4021 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4023 commit b830b7f1635984ba607219fcbd78597c28eeb529
4024 Author: Becky Bruce <bgill@freescale.com>
4025 Date: Thu Jan 10 14:00:28 2008 -0600
4027 86xx: Support 2GB DIMMs
4029 Configure the number of bits used to address the banks inside the SDRAM
4030 device. The default register value of 0 means 2 bits to address 4 banks.
4031 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
4033 Signed-off-by: Becky Bruce <bgill@freescale.com>
4035 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
4036 Author: Niklaus Giger <niklausgiger@gmx.ch>
4037 Date: Thu Jan 10 18:50:33 2008 +0100
4039 ppc4xx: Make Sequoia boot vxWorks
4042 TLB 0 a entry for the Machine Check interrupt
4043 TLB 1 a entry for the RAM
4044 TLB 2 a entry for the EBC
4045 TLB 3 a entry for the boot flash
4047 After changing the baudrate to 9600 I had no problems to boot the
4048 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
4051 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4053 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
4054 Author: Larry Johnson <lrj@arlinx.com>
4055 Date: Wed Jan 9 23:10:27 2008 -0500
4057 ppc4xx: Fix dflush() to restore DVLIM register
4059 Signed-off-by: Larry Johnson <lrj@acm.org>
4061 commit 252f60b068d1f94190b5bcfda169db582387e15e
4062 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4063 Date: Thu Jan 10 03:52:44 2008 -0500
4065 Nios2: remove common/cmd_bdinfo.c unused variable.
4067 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4068 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
4070 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
4071 Author: Ben Warren <biggerbadderben@gmail.com>
4072 Date: Wed Jan 9 18:15:53 2008 -0500
4074 Fix Ethernet init() return codes
4076 Change return values of init() functions in all Ethernet drivers to conform
4082 All drivers going forward should return 0 on success. Current drivers that
4083 return 1 on success were left as-is to minimize changes.
4085 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4086 Acked-by: Stefan Roese <sr@denx.de>
4087 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4088 Acked-by: Kim Phillips <kim.phillips@freescale.com>
4089 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4090 Acked-By: Timur Tabi <timur@freescale.com>
4092 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
4093 Author: Wolfgang Denk <wd@denx.de>
4094 Date: Thu Jan 10 00:55:14 2008 +0100
4096 Coding Style cleanup; update CHANGELOG
4098 Signed-off-by: Wolfgang Denk <wd@denx.de>
4100 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
4101 Author: Kim Phillips <kim.phillips@freescale.com>
4102 Date: Wed Jan 9 16:56:54 2008 -0600
4104 Add QE brg freq and correct qe bus freq fdt update code
4106 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4107 Signed-off-by: Andy Fleming <afleming@freescale.com>
4109 commit 890dfef06c2d169a3356359596890754dfb8ee1c
4110 Author: Andy Fleming <afleming@freescale.com>
4111 Date: Wed Jan 9 16:34:51 2008 -0600
4113 Remove cache config from ATUM8548 and sbc8548 configs
4115 These boards weren't updated by Kumar's config patch because they
4116 weren't in the tree, yet.
4118 Signed-off-by: Andy Fleming <afleming@freescale.com>
4120 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
4121 Author: Timur Tabi <timur@freescale.com>
4122 Date: Mon Jan 7 13:31:19 2008 -0600
4124 85xx: add ability to upload QE firmware
4126 Define the layout of a binary blob that contains a QE firmware and instructions
4127 on how to upload it. Add function qe_upload_firmware() to parse the blob and
4128 perform the actual upload. Add command-line command "qe fw" to take a firmware
4129 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
4130 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
4131 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
4133 Signed-off-by: Timur Tabi <timur@freescale.com>
4135 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
4136 Author: Kumar Gala <galak@kernel.crashing.org>
4137 Date: Tue Jan 8 01:22:21 2008 -0600
4139 85xx: Remove cache config from configs.h
4141 Either use the standard defines in asm/cache.h or grab the information
4142 at runtime from the L1CFG SPR.
4144 Also, minor cleanup in cache.h to make the code a bit more readable.
4146 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4148 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
4149 Author: robert lazarski <robertlazarski@gmail.com>
4150 Date: Fri Dec 21 10:39:27 2007 -0500
4152 mpc85xx: Add support for ATUM8548 (updated)
4154 Add support for Instituto Atlantico's ATUM8548 board
4156 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
4157 Signed-off-by: Andy Fleming <afleming@freescale.com>
4159 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
4160 Author: robert lazarski <robertlazarski@gmail.com>
4161 Date: Fri Dec 21 10:36:37 2007 -0500
4163 mpc85xx: Add support for ATUM8548 (updated)
4165 Add support for Instituto Atlantico's ATUM8548 board
4167 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
4169 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
4170 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
4171 Date: Thu Dec 13 06:45:14 2007 -0600
4173 mpc85xx: Add support for SBC8548 (updated)
4175 Add support for Wind River's SBC8548 reference board.
4177 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
4179 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
4180 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
4181 Date: Thu Dec 13 06:45:08 2007 -0600
4183 mpc85xx: Add support for SBC8548 (updated)
4185 Add support for Wind River's SBC8548 reference board.
4187 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
4188 Signed-off by: Andy Fleming <afleming@freescale.com>
4190 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
4191 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4192 Date: Mon Oct 22 19:58:19 2007 +0400
4194 MPC8568E-MDS: set up QE pario for UART1
4196 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
4197 be set up appropriately.
4199 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4201 commit ad162249cb371e9e38971676f09be791e5f3cf4a
4202 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4203 Date: Mon Oct 22 18:12:46 2007 +0400
4205 MPC8568E-MDS: reset UCCs to use them reliably
4207 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
4210 p.s Similar code exists in the Linux kernel board file (for capability
4211 reasons with older U-Boots), but should be removed some day.
4213 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4215 commit 2146cf56821c3364786ca94a7306008c5824b238
4216 Author: Kumar Gala <galak@kernel.crashing.org>
4217 Date: Wed Dec 19 01:18:15 2007 -0600
4219 Reworked FSL Book-E TLB macros to be more readable
4221 The old macros made it difficult to know what WIMGE and perm bits
4222 were set for a TLB entry. Actually use the bit masks for these items
4223 since they are only a single bit.
4225 Also moved the macros into mmu.h out of e500.h since they aren't specific
4228 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4230 commit 1d47273d46925929f8f2c1913cd96d7257aade88
4231 Author: Kumar Gala <galak@kernel.crashing.org>
4232 Date: Tue Dec 18 23:21:51 2007 -0600
4234 Use FSL Book-E MMU macros from Linux Kernel
4236 Grab the FSL Book-E MAS register macros from Linux. Also added
4237 defines for page sizes up to 4TB and removed SHAREN since it doesnt
4240 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4242 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
4243 Author: Andy Fleming <afleming@freescale.com>
4244 Date: Wed Jan 9 13:51:32 2008 -0600
4246 Fix my own merge stupidity
4248 Way back in August I merged Heiko's patch:
4249 566a494f592: [PCS440EP] upgrade the PCS440EP board
4251 with Jon's CONFIG_COMMANDS patches.
4253 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
4255 However, in the process, I left out some of Heiko's good changes.
4257 Now Heiko's and Jon's patches are properly merged in fat_register_device()
4259 Signed-off-by: Andy Fleming <afleming@freescale.com>
4261 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
4262 Author: James Yang <James.Yang@freescale.com>
4263 Date: Wed Jan 9 11:17:49 2008 -0600
4265 Expose parse_line() globally.
4267 Add new function readline_into_buffer() that allows the
4268 output of readline to be put into a pointer to char buffer.
4270 This refactoring allows other functions besides the
4271 main command loop to also use the same input mechanism.
4273 Signed-off-by: James Yang <James.Yang@freescale.com>
4274 Acked-by: Jon Loeliger <jdl@freescale.com>
4276 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
4277 Author: Guennadi Liakhovetski <lg@denx.de>
4278 Date: Wed Jan 9 01:15:25 2008 +0100
4280 trivial: fix consequences of a bad merge
4282 Fix what looks like a merge artifact.
4284 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4286 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
4287 Author: Zhang Wei <wei.zhang@freescale.com>
4288 Date: Thu Jan 3 10:51:15 2008 +0800
4290 Add Ctrl combo key support to usb keyboard driver.
4292 Ctrl combo key support is added, which is very useful to input Ctrl-C
4293 for interrupt current job.
4294 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
4295 key input when tstc() is called.
4297 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4299 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
4300 Author: Marcel Ziswiler <marcel@ziswiler.com>
4301 Date: Sun Dec 30 03:30:56 2007 +0100
4303 fix various comments
4305 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
4307 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
4308 Author: Marcel Ziswiler <marcel@ziswiler.com>
4309 Date: Sun Dec 30 03:30:46 2007 +0100
4311 fix comments with new drivers organization
4313 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
4315 commit a9b410dc7d2a4721c408b13abfc037988150f145
4316 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4317 Date: Fri Dec 28 12:50:59 2007 +0900
4319 Remove the obsolete terse version of do_mii()
4321 We now have more useful version of do_mii() and everybody use it.
4322 Gerald Van Baren says:
4324 > When I originally wrote the mii command 6(!) years ago, I wrote a
4325 > verbose version that printed human readable decomposition of the flags,
4326 > etc., and a terse one that didn't print as much stuff and thus had a
4327 > smaller memory footprint.
4329 > It sounds like the terse version has withered and died, apparently
4330 > people are only using the verbose version (which is very understandable,
4333 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4334 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4336 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
4337 Author: Mike Frysinger <vapier@gentoo.org>
4338 Date: Thu Dec 27 13:42:56 2007 -0500
4340 Do not reference sha1.c when building mkimage.
4342 remove sha1.o from mkimage linking since it isn't actually used.
4344 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
4346 commit b9173af73e524d37c812f210173cf83385c5171a
4347 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4348 Date: Thu Dec 27 15:39:54 2007 +0900
4350 common/cmd_mii.c: Add sanity argc check
4352 If type mii command without arguments, we suffer from uninitialized argv[]
4353 entries; for example we MIPS get stuck by TLB error.
4355 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4357 commit 500856eb1707ed17d9204baa61dd59948d3b2899
4358 Author: Rafal Jaworowski <raj@semihalf.com>
4359 Date: Wed Jan 9 19:39:36 2008 +0100
4361 API for external applications.
4363 This is an API for external (standalone) applications running on top of
4364 U-Boot, and is meant to be more extensible and robust than the existing
4365 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
4368 Included is the demo application using this new framework (api_examples).
4370 Please note this is still an experimental feature, and is turned off by
4373 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
4375 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
4376 Author: Jon Loeliger <jdl@freescale.com>
4377 Date: Wed Jan 9 12:14:55 2008 -0600
4379 86xx: Remove cache config from configs.h
4381 Just use the standard defines in asm/cache.h.
4383 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4385 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
4386 Author: Rafal Jaworowski <raj@semihalf.com>
4387 Date: Wed Jan 9 18:05:27 2008 +0100
4389 Globalize envmatch()
4391 The newly introduced API (routines related to env vars) will need to call
4394 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
4396 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
4397 Author: Jon Loeliger <jdl@freescale.com>
4398 Date: Fri Jan 4 12:07:27 2008 -0600
4400 Convert MPC8610HPCD to use libfdt.
4402 Assumes the presence of the aliases node in the DTS to
4403 locate the pci and serial nodes for fixups.
4405 Use consistent fdtaddr and fdtfile in environment variables.
4407 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4409 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
4410 Author: Jon Loeliger <jdl@freescale.com>
4411 Date: Fri Jan 4 11:58:23 2008 -0600
4413 8610: Fix lingering compile warnings.
4417 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4419 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
4420 Author: Wolfgang Denk <wd@denx.de>
4421 Date: Wed Jan 9 15:14:46 2008 +0100
4423 Coding Style cleanup, update CHANGELOG
4425 Signed-off-by: Wolfgang Denk <wd@denx.de>
4427 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
4428 Author: Mike Frysinger <vapier@gentoo.org>
4429 Date: Tue Dec 18 04:29:55 2007 -0500
4431 fix easylogo on big endian dev systems
4433 didnt realize how out of shape easylogo actually was until i tried using it.
4434 this patch does byte swapping as need be on the input tga header since the tga
4435 is in little endian but the host could just as well be big endian. i didnt
4436 bother using bswap macros or such stuff from system headers as nothing in
4437 POSIX dictates byte swapping functionality.
4439 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
4441 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
4442 Author: Mike Frysinger <vapier@gentoo.org>
4443 Date: Tue Dec 18 03:23:25 2007 -0500
4447 - make the Makefile not suck
4448 - include proper headers for prototypes
4449 - fix obvious broken handling of strchr() when handling '.' in filenames
4451 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
4453 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
4454 Author: raptorbrino@aim.com <raptorbrino@aim.com>
4455 Date: Thu Dec 13 21:23:28 2007 -0500
4457 Fix build problems under Cygwin
4459 This patch allows u-boot to build without error in a cygwin
4460 environment. Cygwin does not define __u64 in it's
4461 include/asm/types.h file. The -idirafter flag in the u-boot
4462 build causes the inclusion of the cygwin types.h file as opposed
4463 to u-bot/include/asm/types.h file which does define __u64.
4464 Subsequently, sha1.c compile fails due to unknown symbol.
4466 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
4468 commit 43ef1c381f9195504a2488f5cb909227eb97d475
4469 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
4470 Date: Fri Nov 30 17:29:59 2007 +0100
4472 cmd_bmp: Add support for displaying gzip compressed bmps
4474 The existing code can show information about a gzip compressed BMP
4475 image, but can't actually display it.
4477 Therefore, move the decompression code out of bmp_info() and use it in
4478 bmp_display() as well in order to display a compressed BMP image.
4480 Also, clean things up a bit and fix a memory leak while we're at it.
4482 [hskinnemoen@atmel.com: a bit of refactoring]
4483 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
4485 commit d197ffd8172c6fdef38733424640a9a47295d6e9
4486 Author: Guennadi Liakhovetski <lg@denx.de>
4487 Date: Thu Nov 29 21:15:56 2007 +0100
4489 Fix and optimize MII operations on FEC (MPC8xx) controllers
4491 This patch fixes several issues at least on a MPC885 based system with two
4492 FEC interfaces used in MII mode.
4494 1. PHY discovery should first read PHY_PHYIDR2 register and only then
4495 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
4496 otherwise the values read are wrong. Also notice, that PHY discovery
4497 cannot work on MPC88x / MPC87x in setups with both FECs active at all
4498 in its present form, because for both interfaces the registers from FEC
4499 1 are used to communicate over MII.
4501 2. Remove code duplication for resetting the FEC by isolating it into a
4504 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
4506 4. Optimize mii_init() to only reset the FEC 1 controller once.
4508 5. Fix a typo in mii_init() using index i instead of j thus potentially
4509 leading to unpredictable results.
4511 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4513 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
4514 Author: Guennadi Liakhovetski <lg@denx.de>
4515 Date: Tue Nov 20 13:14:20 2007 +0100
4517 Fix endianness conversions in rtl8169 driver
4519 It is unclear on what platforms this driver has been tested, since
4520 noone up to now defines CONFIG_RTL8169 in the board configuration
4521 header. Now it has been fixed for a big-endian mpc8241 based
4522 linkstation platform. This patch presents the necessary endianness
4525 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4527 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
4528 Author: Zhang Wei <wei.zhang@freescale.com>
4529 Date: Thu Jan 3 10:51:15 2008 +0800
4531 Add Ctrl combo key support to usb keyboard driver.
4533 Ctrl combo key support is added, which is very useful to input Ctrl-C
4534 for interrupt current job.
4535 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
4536 key input when tstc() is called.
4538 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
4539 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4541 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
4542 Author: Wolfgang Denk <wd@denx.de>
4543 Date: Wed Jan 9 13:43:38 2008 +0100
4545 Coding Style clenaup; update CHANGELOG
4547 Signed-off-by: Wolfgang Denk <wd@denx.de>
4549 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
4550 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4551 Date: Thu Dec 27 17:13:11 2007 +0100
4553 Remove bit swapping in Xilinx Spartan bitfile loading
4555 This patch removes the unnecessary bit swapping when
4556 booting .bit files with the 'fpga loadb' command.
4558 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4560 commit 437fc7327f0611f82937858f2d80e4cd61b40984
4561 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4562 Date: Thu Dec 27 17:13:05 2007 +0100
4564 Fix MSB check in Xilinx Spartan slave serial mode
4566 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4568 commit 3bff4ffa33729a42645e328a21e8d16488872958
4569 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4570 Date: Thu Dec 27 17:12:56 2007 +0100
4572 Add new Xilinx Spartan FPGA types
4574 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4576 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
4577 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4578 Date: Thu Dec 27 17:12:43 2007 +0100
4580 Add pre and post configuration callbacks for Spartan FPGAs
4582 This patch adds a post configuration callback for Spartan2/3 FPGAs.
4583 pre and post configuration callback are now optional and
4584 not called when the function pointer is set to NULL.
4586 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4588 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
4589 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4590 Date: Thu Dec 27 17:12:34 2007 +0100
4592 Improve configuration of FPGA subsystem
4594 This patch removes the FPGA subsystem configuration through
4595 the CONFIG_FPGA bitmask configuration option.
4597 See README for the new options:
4600 CONFIG_FPGA_<vendor>,
4601 CONFIG_FPGA_<family>
4603 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4605 commit 95c6bc7d4a3588b452baca610f8c795a83630477
4606 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4607 Date: Thu Dec 27 16:55:17 2007 +0100
4609 Add Epson RX8025 RTC support
4611 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4613 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
4614 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4615 Date: Thu Dec 27 16:57:23 2007 +0100
4617 serial: Make default_serial_console() a weak function
4619 With this patch it is possible to reimplement default_serial_console()
4620 in board specific code. This will be done in the upcomming PMC440
4621 U-Boot port. This also allows the lwmon board maintainer to
4622 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
4624 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4626 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
4627 Author: Harald Welte <laforge@openmoko.org>
4628 Date: Wed Dec 19 14:14:47 2007 +0100
4630 add 'terminal program' functionality
4632 This patch adds a 'cu' like serial terminal command to u-boot
4633 using which you can access other serial ports from the system console.
4635 OpenMoko uses this in their Neo1973 phones to get access to the GSM
4636 Modem and GPS chip from the bootloader.
4638 Signed-off-by: Harald Welte <laforge@openmoko.org>
4640 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
4641 Author: Harald Welte <laforge@openmoko.org>
4642 Date: Wed Dec 19 14:12:53 2007 +0100
4644 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
4645 that used to exist with the legacy NAND code
4647 Signed-off-by: Harald Welte <laforge@openmoko.org>
4649 commit f540c42d9564854b19ce9bbb70affe172529fe70
4650 Author: Harald Welte <laforge@openmoko.org>
4651 Date: Wed Dec 19 14:09:58 2007 +0100
4653 Fix building with CRAMFS but not JFFS2 support
4655 Signed-off-by: Harald Welte <laforge@openmoko.org>
4657 commit 23d0baf967fecdaf1804f045f6339337c5607eec
4658 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4659 Date: Sat Dec 22 15:52:58 2007 +0100
4661 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
4663 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4664 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4666 commit 23776ff292966a85d811126933830bed48211826
4667 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4668 Date: Tue Dec 11 10:53:12 2007 +0100
4670 ARM: support board-specific ethernet PHY init
4672 Add until the new phylib will be arrived
4674 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4676 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
4677 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4678 Date: Sat Dec 8 16:34:08 2007 +0100
4680 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
4682 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4684 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
4685 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4686 Date: Sun Dec 9 11:01:10 2007 +0100
4688 Add missing file in gitignore and comments
4690 based on Linux source tree's .gitignore files
4692 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4694 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
4695 Author: Wolfgang Denk <wd@denx.de>
4696 Date: Wed Jan 9 11:36:21 2008 +0100
4698 Coding Style cleanup, update CHANGELOG
4700 Signed-off-by: Wolfgang Denk <wd@denx.de>
4702 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
4703 Author: Stefan Roese <sr@denx.de>
4704 Date: Wed Jan 9 10:38:58 2008 +0100
4706 POST: Execute SPR test after relocation
4708 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
4709 self modifying code and this doesn't work with stack in d-cache, since
4710 I can't move the code from d-cache to i-cache. We move the SPR test to
4711 be executed a little later, after relocation. Then stack is located in
4712 SDRAM and this self-modifying code is no problem anymore.
4714 Signed-off-by: Stefan Roese <sr@denx.de>
4716 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
4717 Author: Stefan Roese <sr@denx.de>
4718 Date: Wed Jan 9 10:28:20 2008 +0100
4720 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
4722 This patch configures the LWMON5 port to use d-cache as init-ram and
4723 the unused GPT0_COMP6 as POST WORD storage.
4725 Signed-off-by: Stefan Roese <sr@denx.de>
4727 commit 1754f50b710194f886b6f2831803d8960171a14d
4728 Author: Stefan Roese <sr@denx.de>
4729 Date: Wed Jan 9 10:25:46 2008 +0100
4731 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
4733 The privious 4xx POST implementation only supported storing the POST
4734 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
4735 we need to store the POST WORD in some other non volatile location.
4736 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
4739 Signed-off-by: Stefan Roese <sr@denx.de>
4741 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
4742 Author: Stefan Roese <sr@denx.de>
4743 Date: Wed Jan 9 10:23:16 2008 +0100
4745 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
4747 This patch adds support for locking the init-ram/stack in d-cache,
4748 so that other regions may use d-cache as well
4750 Note, that this current implementation locks exactly 4k of d-cache,
4751 so please make sure that you don't define a bigger init-ram area. Take
4752 a look at the lwmon5 440EPx implementation as a reference.
4754 Signed-off-by: Stefan Roese <sr@denx.de>
4756 commit 0ddb89601a8d29e808db450366752ffdc6267c53
4757 Author: Wolfgang Denk <wd@denx.de>
4758 Date: Wed Jan 9 10:16:33 2008 +0100
4760 Fix memset bug in ext2fs_read_file()
4762 ext2fs_read_file() had the function arguments swapped.
4764 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
4766 Signed-off-by: Wolfgang Denk <wd@denx.de>
4768 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
4769 Author: Markus Klotzbücher <mk@denx.de>
4770 Date: Tue Jan 5 08:17:15 1988 +0100
4772 Fix problems with usb storage devices on MPC5200 /TQM5200
4774 The MPC5200 OHCI controller operates in big endian, so
4775 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
4777 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4779 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
4780 Author: Wolfgang Denk <wd@denx.de>
4781 Date: Tue Jan 8 22:58:27 2008 +0100
4783 Fix compile problem with new env code.
4785 Signed-off-by: Wolfgang Denk <wd@denx.de>
4787 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
4788 Author: Markus Klotzbücher <mk@denx.de>
4789 Date: Tue Nov 27 10:23:20 2007 +0100
4791 tools: fix fw_printenv tool to compile again
4793 This patch updates the fw_printenv/fw_setenv userspace tool to include
4794 the correct MTD header in order to compile against current kernel
4795 headers. Backward compatibility is preserved by introducing an option
4796 MTD_VERSION which can be set to "old" for compilation using the old MTD
4797 headers. Along with this a number of warnings are fixed.
4799 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4801 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
4802 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4803 Date: Tue Jan 8 15:40:09 2008 +0100
4805 ppc4xx: assign PCI interrupts on seuqoia boards
4807 Some operating systems rely on assigned PCI interrupts.
4809 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4811 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
4812 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4813 Date: Tue Jan 8 15:50:49 2008 +0100
4815 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
4817 This patch allows the use of 4xx interrupt vector number defines
4818 in board specific code outside cpu/ppc4xx.
4820 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4822 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
4823 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4824 Date: Tue Jan 8 15:39:01 2008 +0100
4826 ppc4xx: Fix UIC2 vector number base
4828 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4830 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
4831 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4832 Date: Tue Jan 8 12:49:58 2008 +0100
4834 ppc4xx: Update PLB/PCI divider for PMC440 board
4836 This patch updates the PLB/PCI divider when running at
4837 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
4839 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4841 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
4842 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4843 Date: Tue Jan 8 11:13:09 2008 +0100
4845 ppc4xx: Disable error message when no NAND chip is installed on PMC440
4847 Add CFG_NAND_QUIET_TEST option to disable error message when
4848 no NAND chip is installed on PMC440 boards.
4850 Disable a couple of config defines that are only used for NAND_U_BOOT.
4852 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4854 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
4855 Author: Wolfgang Denk <wd@denx.de>
4856 Date: Tue Jan 8 22:58:27 2008 +0100
4858 Fix compile problem with new env code.
4860 Signed-off-by: Wolfgang Denk <wd@denx.de>
4862 commit 6de66b35426312a21174a9bf0576a094e2904bea
4863 Author: Markus Klotzbücher <mk@denx.de>
4864 Date: Tue Nov 27 10:23:20 2007 +0100
4866 tools: fix fw_printenv tool to compile again
4868 This patch updates the fw_printenv/fw_setenv userspace tool to include
4869 the correct MTD header in order to compile against current kernel
4870 headers. Backward compatibility is preserved by introducing an option
4871 MTD_VERSION which can be set to "old" for compilation using the old MTD
4872 headers. Along with this a number of warnings are fixed.
4874 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4876 commit ad3006fe7e84667021753b74247b0bafd97ba35f
4877 Author: Gerald Van Baren <vanbaren@cideas.com>
4878 Date: Mon Jan 7 23:47:32 2008 -0500
4880 LIBFDT: use memmove() instead of memcpy()
4882 This is partial patch from the DTC/libfdt
4883 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
4884 Author: David Gibson <david@gibson.dropbear.id.au>
4885 Date: Wed Nov 21 11:56:14 2007 +1100
4887 The patch also fixes one genuine bug caught by valgrind -
4888 _packblocks() in fdt_rw.c was using memcpy() where it should have been
4891 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4893 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
4894 Author: David Gibson <david@gibson.dropbear.id.au>
4895 Date: Mon Dec 17 14:42:07 2007 +1100
4897 libfdt: Add more documentation (patch the seventh)
4899 This patch adds more documenting comments to libfdt.h. Specifically,
4900 these document the read/write functions (not including fdt_open_into()
4901 and fdt_pack(), for now).
4903 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4905 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
4906 Author: David Gibson <david@gibson.dropbear.id.au>
4907 Date: Mon Dec 17 14:41:52 2007 +1100
4909 libfdt: Add more documentation (patch the sixth)
4911 This patch adds some more documenting comments to libfdt.h.
4912 Specifically this documents all the write-in-place functions.
4914 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4916 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
4917 Author: Gerald Van Baren <vanbaren@cideas.com>
4918 Date: Sat Dec 29 22:45:27 2007 -0500
4920 Fine grained per property /chosen updating.
4922 Implement a suggestion by Scott Wood to make the /chosen handling fine
4923 grained. Don't overwrite pre-existing properties on a per-property basis,
4924 so if /chosen exists but a necessary /chosen/property doesn't, it gets
4925 created. If a /chosen property exists, it is NOT overwritten unless the
4926 "force" flag is true.
4928 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4930 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
4931 Author: Gerald Van Baren <vanbaren@cideas.com>
4932 Date: Sat Jan 5 15:33:29 2008 -0500
4934 Improve the FDT help message.
4936 Add a note that "fdt copy" makes the new address active.
4937 Remove most of the extra hints at the end of the fdt help.
4939 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4941 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
4942 Author: Gerald Van Baren <vanbaren@cideas.com>
4943 Date: Sat Jan 5 14:52:04 2008 -0500
4945 Support setting FDT properties with optional values.
4947 Fix a bug found and documented by Bartlomiej Sieka where the optional
4948 value on "fdt set <path> <prop> [<val>]" wasn't optional.
4950 => fdt mknode / testnode
4951 => fdt print /testnode
4954 => fdt set /testnode testprop
4955 => fdt print /testnode
4960 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4962 commit 22fb2246df91bfc840d87f0c5910818bad55577a
4963 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4964 Date: Fri Dec 28 11:56:30 2007 +0100
4966 Add fdt_find_and_setprop() to fdt_support.h
4968 fdt_find_and_setprop() is used by several 4xx boards and it's
4969 missing in the appropriate header. This patch eliminates a
4970 warning when building U-Boot for such boards.
4972 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4973 Acked-by: Stefan Roese <sr@denx.de>
4975 commit 802b769bac17b0560d3535a42c502469ee190cd1
4976 Author: Stefan Roese <sr@denx.de>
4977 Date: Tue Jan 8 18:39:30 2008 +0100
4979 ppc4xx: Return 0 on success in 4xx ethernet driver
4981 Signed-off-by: Stefan Roese <sr@denx.de>
4983 commit 6775c68683a53c7abc778774641aac6f833a2cbf
4984 Author: Kim Phillips <kim.phillips@freescale.com>
4985 Date: Tue Jan 8 09:59:49 2008 -0600
4987 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
4989 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4991 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
4992 Author: Kim Phillips <kim.phillips@freescale.com>
4993 Date: Thu Dec 20 16:28:34 2007 -0600
4995 mpc83xx: rm remaining FLAT_TREE code
4997 ..in board pci.c files
4999 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5001 commit b3458d2cd55d01732e30a76d898afd99e871cd67
5002 Author: Kim Phillips <kim.phillips@freescale.com>
5003 Date: Thu Dec 20 15:57:28 2007 -0600
5005 mpc83xx: remove FLAT_TREE code
5007 need to rm it from pci code, too!
5009 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5011 commit 5b8bc606c61456566af6912f818a153b6b06f242
5012 Author: Kim Phillips <kim.phillips@freescale.com>
5013 Date: Thu Dec 20 14:09:22 2007 -0600
5015 mpc83xx: convert to using do_fixup_*()
5017 convert to using simpler mpc85xx style fdt update code; streamline by
5018 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
5019 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
5020 converted over to using libfdt).
5022 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5024 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
5025 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
5026 Date: Thu Dec 20 12:58:51 2007 -0500
5028 sbc8349: enable libfdt by default on WRS SBC8349 board.
5030 Make libfdt the default for the WRS SBC8349 board.
5031 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
5032 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
5034 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5036 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
5037 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
5038 Date: Thu Dec 20 12:58:16 2007 -0500
5040 sbc8349: migrate board to libfdt
5042 This adds libfdt support code for the Wind River sbc8349 board.
5044 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
5045 the other Freescale 83xx boards.
5047 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5049 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
5050 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
5051 Date: Thu Dec 20 12:56:19 2007 -0500
5053 sbc8349: Remove board specific ECC code
5055 ECC code is now shared for all 83xx boards, so remove board specific one.
5056 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
5058 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
5060 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
5061 Author: Kim Phillips <kim.phillips@freescale.com>
5062 Date: Thu Dec 20 01:30:48 2007 -0600
5064 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
5066 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
5068 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5070 commit ccf21c311e68d48399eff1e72936052885f6e3f7
5071 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5072 Date: Thu Dec 6 16:43:40 2007 +0100
5074 Add support CONFIG_UEC_ETH3 in MPC83xx
5076 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5078 commit e6af9932d31171e35db880e7b2f29f903b1b7660
5079 Author: Kumar Gala <galak@kernel.crashing.org>
5080 Date: Mon Nov 26 11:00:54 2007 -0600
5082 Remove CONFIG options related to OF that we dont use
5084 The MPC8360E MDS config defined:
5086 CONFIG_OF_HAS_UBOOT_ENV
5088 Which we don't use or ever needed. This seems like copy-paste feature creep.
5090 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5092 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
5093 Author: Kim Phillips <kim.phillips@freescale.com>
5094 Date: Mon Dec 10 14:16:22 2007 -0600
5096 mpc83xx: supress compiler warning
5098 mpc8360emds.c: In function ‘ft_board_setup’:
5099 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
5100 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
5102 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5104 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
5105 Author: Kim Phillips <kim.phillips@freescale.com>
5106 Date: Tue Nov 27 14:17:29 2007 -0600
5108 mpc83xx: fix remaining fdt_find_node_by_path references
5110 rename to fdt_path_offset
5112 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5114 commit 921d4b19ad1be704df58725485d9292dc0414adf
5115 Author: Kim Phillips <kim.phillips@freescale.com>
5116 Date: Mon Nov 19 12:30:09 2007 -0600
5118 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
5120 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
5121 This change guarantees that the environment will be located on the
5122 first flash sector after the U-Boot image.
5124 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5126 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
5127 Author: Kim Phillips <kim.phillips@freescale.com>
5128 Date: Fri Nov 9 14:28:08 2007 -0600
5130 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
5132 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
5133 properties in the device tree so the PHY gets configured for internal delay on
5134 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
5136 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5138 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
5139 Author: Dave Liu <r63238@freescale.com>
5140 Date: Tue Sep 18 12:41:15 2007 +0800
5142 mpc83xx: update the CREDITS and MAINTAINERS
5144 update the CREDITS and MAINTAINERS.
5146 Signed-off-by: Dave Liu <daveliu@freescale.com>
5148 commit b21add4b42af7b767448251b599b91066a160e0d
5149 Author: Dave Liu <r63238@freescale.com>
5150 Date: Tue Sep 18 12:40:21 2007 +0800
5152 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
5154 Add the MAINTAINER and MAKEALL entries for mpc837xemds
5156 Signed-off-by: Dave Liu <daveliu@freescale.com>
5158 commit f8900ce9094c462355eb792eea264ff16ac8fd16
5159 Author: Dave Liu <r63238@freescale.com>
5160 Date: Tue Sep 18 12:38:53 2007 +0800
5162 mpc83xx: Add the MPC837xEMDS board readme
5164 Add the README.mpc837xemds to /doc
5166 Signed-off-by: Dave Liu <daveliu@freescale.com>
5168 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
5169 Author: Dave Liu <r63238@freescale.com>
5170 Date: Tue Sep 18 12:37:57 2007 +0800
5172 mpc83xx: Add the support of MPC837xEMDS board
5174 The MPC837xEMDS board support:
5175 * DDR2 400MHz hardcoded and SPD init
5176 * Local bus NOR Flash
5177 * I2C, UART, MII and RTC
5181 Signed-off-by: Dave Liu <daveliu@freescale.com>
5183 commit 555da61702771fe0f76f3de23b4e7590f3704161
5184 Author: Dave Liu <r63238@freescale.com>
5185 Date: Tue Sep 18 12:36:58 2007 +0800
5187 mpc83xx: Add the support of MPC8315E SoC
5189 The MPC8315E SoC including e300c3 core and new IP blocks,
5190 such as TDM, PCI Express and SATA controller.
5192 Signed-off-by: Dave Liu <daveliu@freescale.com>
5194 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
5195 Author: Dave Liu <r63238@freescale.com>
5196 Date: Tue Sep 18 12:36:11 2007 +0800
5198 mpc83xx: Add the support of MPC837x SoC
5200 The MPC837x SoC including e300c4 core and new IP blocks,
5201 such as SDHC, PCI Express and SATA controller.
5203 Signed-off-by: Dave Liu <daveliu@freescale.com>
5205 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
5206 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5207 Date: Wed Nov 14 18:54:53 2007 +0300
5209 MPC8360E-MDS: configure and enable second UART
5211 Despite user manual, BCSR9.7 is negated (high) on HRST, so
5212 UART2 is disabled. Fix that and configure QE pins properly.
5214 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5216 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
5217 Author: Timur Tabi <timur@freescale.com>
5218 Date: Mon Nov 5 09:34:06 2007 -0600
5220 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
5222 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
5223 currently-defined 83xx boards. This change guarantees that the environment
5224 will be located on the first flash sector after the U-Boot image.
5226 Signed-off-by: Timur Tabi <timur@freescale.com>
5227 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5229 commit e05329516a13616b53240cd85b739217c2bf87f1
5230 Author: Larry Johnson <lrj@acm.org>
5231 Date: Fri Jan 4 13:27:02 2008 -0500
5233 ppc4xx: Remove weak binding from common Denali data-eye search code
5235 Now that there are no board-specific versions of
5236 "denali_core_search_data_eye()", the weak binding on the common version
5239 Signed-off-by: Larry Johnson <lrj@acm.org>
5241 commit 5ba576c01602fd328800a427964c36a0a05c5dce
5242 Author: Stefan Roese <sr@denx.de>
5243 Date: Sat Jan 5 09:13:46 2008 +0100
5245 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
5247 Signed-off-by: Stefan Roese <sr@denx.de>
5249 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
5250 Author: Stefan Roese <sr@denx.de>
5251 Date: Sat Jan 5 09:12:41 2008 +0100
5253 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
5255 On Katmai the complete auto-calibration somehow doesn't seem to
5256 produce the best results, meaning optimal values for RQFD/RFFD.
5257 This was discovered by GDA using a high bandwidth scope,
5258 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
5259 so now on Katmai "only" RFFD is auto-calibrated.
5261 This patch also adds RDCC calibration as mentioned on page 7 of
5262 the AMCC PowerPC440SP/SPe DDR2 application note:
5263 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
5265 Signed-off-by: Stefan Roese <sr@denx.de>
5267 commit 49db47b8ae6afff2b898be312948ff501357dc80
5268 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5269 Date: Wed Jan 2 16:48:42 2008 +0100
5271 ppc4xx: Remove sdram.h from PMC440 board
5273 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5275 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
5276 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5277 Date: Wed Jan 2 16:48:34 2008 +0100
5279 ppc4xx: use common denali core defines and data eye search code for PMC440
5281 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5283 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
5284 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5285 Date: Wed Jan 2 12:05:14 2008 +0100
5287 ppc4xx: More cleanup for esd's LCD code
5289 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5291 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
5292 Author: Stefan Roese <sr@denx.de>
5293 Date: Fri Jan 4 12:00:01 2008 +0100
5295 ppc4xx: Fix Sequoia NAND booting target
5297 The Sequoia NAND booting target now uses the recently extracted
5298 cpu/ppc4xx/denali_data_eye.c file too.
5300 Signed-off-by: Stefan Roese <sr@denx.de>
5302 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
5303 Author: Lawrence R. Johnson <lrj@acm.org>
5304 Date: Thu Jan 3 15:02:02 2008 -0500
5306 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
5308 Signed-off-by: Larry Johnson <lrj@acm.org>
5310 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
5311 Author: Lawrence R. Johnson <lrj@acm.org>
5312 Date: Fri Jan 4 02:11:56 2008 -0500
5314 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
5316 Note: this patch changes the configuration of some GPIO registers:
5318 Register Old Value New Value
5319 --------------- ---------- ----------
5320 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
5321 DCR GPIO0_TSRH 0x55005000 0x00000000
5322 DCR GPIO1_TCR 0xC2000000 0xE2000000
5323 DCR GPIO1_TSRL 0x0C000000 0x00200000
5324 DCR GPIO1_ISR2L 0x00050000 0x00110000
5326 Signed-off-by: Larry Johnson <lrj@acm.org>
5328 commit 5ab884b254ca2e707ab50545cd705f30108cf491
5329 Author: Lawrence R. Johnson <lrj@acm.org>
5330 Date: Thu Jan 3 18:54:00 2008 -0500
5332 ppc4xx: Add functionality to GPIO support
5334 This patch makes two additions to GPIO support:
5336 First, it adds function gpio_read_in_bit() to read the a bit from the
5337 GPIO Input Register (GPIOx_IR) in the same way that function
5338 gpio_read_out_bit() reads a bit from the GPIO Output Register
5341 Second, it modifies function gpio_set_chip_configuration() to provide
5342 an additional option for configuring the GPIO from the
5343 "CFG_4xx_GPIO_TABLE".
5345 According to the 440EPx User's Manual, when an alternate output is used,
5346 the three-state control is configured in one of two ways, depending on
5347 the particular output. The first option is to select the corresponding
5348 alternate three-state control in the GPIOx_TRSH/L registers. The second
5349 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
5350 the GPIOx_TRSH/L registers, and set the corresponding bit in the
5351 GPIOx_TCR register to enable the output. For example, the Manual
5352 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
5353 the alternate three-state control (first option), and specifies
5354 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
5355 enabled in the GPIOx_TCR register (second option).
5357 Currently, gpio_set_chip_configuration() configures all alternate signal
5358 outputs to use the first option. This patch allow the second option to
5359 be selected by setting the "out_val" element in the table entry to
5360 "GPIO_OUT_1". The first option is used when the "out_val" element is
5361 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
5362 alternate signal is selected, and because all current GPIO tables set
5363 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
5364 not change any existing configurations.
5366 Signed-off-by: Larry Johnson <lrj@acm.org>
5368 commit 196404cdc1de495d6182e84731c200fc5748df15
5369 Author: Larry Johnson <lrj@arlinx.com>
5370 Date: Sun Dec 30 01:01:54 2007 -0500
5372 PPC4xx: Remove sdram.h from board/lwmon5
5374 These definitions are now in "include/ppc440.h".
5376 Signed-off-by: Larry Johnson <lrj@acm.org>
5378 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
5379 Author: Larry Johnson <lrj@arlinx.com>
5380 Date: Sun Dec 30 01:01:32 2007 -0500
5382 PPC4xx: Use common code for LWMON5 board SDRAM support
5384 This patch also modifies the functionality of the code so that the data-eye
5385 search is now done with with the cache disabled.
5387 Signed-off-by: Larry Johnson <lrj@acm.org>
5389 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
5390 Author: Larry Johnson <lrj@arlinx.com>
5391 Date: Sun Dec 30 01:01:14 2007 -0500
5393 PPC4xx: Remove sdram.h from board/amcc/sequoia
5395 These definitions are now in "include/ppc440.h".
5397 Signed-off-by: Larry Johnson <lrj@acm.org>
5399 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
5400 Author: Larry Johnson <lrj@arlinx.com>
5401 Date: Sun Dec 30 01:00:50 2007 -0500
5403 PPC4xx: Use common code for Sequoia board SDRAM support
5405 Signed-off-by: Larry Johnson <lrj@acm.org>
5407 commit 8b0c5c127690335758100c25eaec2b84db97c101
5408 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5409 Date: Thu Dec 27 16:58:41 2007 +0100
5411 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
5413 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
5414 networking stack does not automatically switch to
5415 another interface. This patch does not touch the default
5418 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5419 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5421 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
5422 Author: Upakul Barkakaty <upakul@gmail.com>
5423 Date: Thu Nov 29 12:16:13 2007 +0530
5425 NET: Proper return code handling in eth_init() function in file eth.c
5427 This patch modifies the return code handling in the eth_init()
5428 function, to be compatible with the handling of the return codes in
5429 the other network stack files. It now returns a 0 on Success and -1 on
5432 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
5433 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5435 commit 5ca2d0953e4579a80810966cca2077e20d912c97
5436 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5437 Date: Mon Nov 19 20:27:04 2007 +0900
5439 net/eth.c: Fix env_enetaddr signed overflow
5441 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
5444 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
5452 Warning: NEC-Candy MAC addresses don't match:
5453 Address in SROM is 00:00:4C:80:92:A2
5454 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
5456 This patch changes env_enetaddr type from `char' to `unsigned char'.
5458 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
5459 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5460 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5462 commit f85b60710571b37293d2233933b76e2aa3db5635
5463 Author: Rafal Jaworowski <raj@semihalf.com>
5464 Date: Thu Dec 27 18:19:02 2007 +0100
5466 Introduce new eth_receive routine
5468 The purpose of this routine is receiving a single network frame, outside of
5469 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
5470 U-Boot will let them utilise networking facilities. For sending a raw frame
5471 the already existing eth_send() can be used.
5473 The direct consumer of this routine is the newly introduced API layer for
5474 external applications (enabled with CONFIG_API).
5476 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5477 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
5478 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5480 commit 5c740711f0ea5b51414b341b71597c4a0751be74
5481 Author: Jon Loeliger <jdl@freescale.com>
5482 Date: Thu Jan 3 10:41:04 2008 -0600
5484 8610: Move include of config.h earlier.
5486 Include config.h earlier in the set of #includes
5487 so as to avoid a incidental and duplicate definition
5488 of CFG_CACHELINE_SIZE.
5490 Signed-off-by: Jon Loeliger
5492 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
5493 Author: Jon Loeliger <jdl@freescale.com>
5494 Date: Tue Dec 4 10:53:34 2007 -0600
5496 Don't slam #undef DEBUG in the 8641HPCN config file.
5498 Doing so prevents it from being individually set
5499 and useful in other files.
5501 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5503 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
5504 Author: Jon Loeliger <jdl@freescale.com>
5505 Date: Wed Nov 28 14:47:18 2007 -0600
5507 Convert MPC8641HPCN to use libfdt.
5509 Assumes the presence of the aliases node in the DTS to
5510 locate the ethernet, pci and serial nodes for fixups.
5512 Use consistent fdtaddr and fdtfile in environment variables.
5514 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5516 commit ce37422d0002e10490e268392e0c4e3028e52cec
5517 Author: Stefan Roese <sr@denx.de>
5518 Date: Wed Jan 2 14:06:26 2008 +0100
5520 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
5522 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
5523 flash chips connected to a 32bit wide port.
5525 Signed-off-by: Stefan Roese <sr@denx.de>
5527 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
5528 Author: Wolfgang Denk <wd@denx.de>
5529 Date: Wed Jan 2 15:58:44 2008 +0100
5531 Fix compile problem introduced by "cleanup" commit 3dfd708c
5533 Signed-off-by: Wolfgang Denk <wd@denx.de>
5535 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
5536 Author: Wolfgang Denk <wd@denx.de>
5537 Date: Wed Jan 2 15:54:45 2008 +0100
5539 Make scripts and Makefiles POSIX compliant
5541 The bash builtin versions of the "test" (resp. "[") command allow
5542 using "==" for string comparisons, but POSIX compatible implemen-
5543 tations (like /usr/bin/test) insist on using "=" only. On such systems
5546 $ /usr/bin/test a == a && echo OK
5547 /usr/bin/test: ==: binary operator expected
5549 This patch fixes Makefiles and scripts to use POSIX style.
5551 Signed-off-by: Wolfgang Denk <wd@denx.de>
5553 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
5554 Author: Stefan Roese <sr@denx.de>
5555 Date: Wed Jan 2 14:05:37 2008 +0100
5557 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
5559 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
5560 flash chips connected to a 32bit wide port.
5562 Signed-off-by: Stefan Roese <sr@denx.de>
5564 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
5565 Author: Wolfgang Denk <wd@denx.de>
5566 Date: Wed Jan 2 12:38:43 2008 +0100
5568 Minor coding style cleanup.
5570 Signed-off-by: Wolfgang Denk <wd@denx.de>
5572 commit e174ac34adf5d5653df12bc3cf19c52063a71269
5573 Author: Stefan Roese <sr@denx.de>
5574 Date: Fri Dec 28 17:29:56 2007 +0100
5576 ppc4xx: Coding style cleanup
5578 Signed-off-by: Stefan Roese <sr@denx.de>
5580 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
5581 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5582 Date: Fri Dec 28 17:07:24 2007 +0100
5584 ppc4xx: Complete PMC440 board support
5586 This patch brings the PMC440 board configuration file.
5587 Finally it enables the PMC440 board support.
5589 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5591 commit 407843a582560fc5231299561ab3c2b6b6cd3397
5592 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5593 Date: Fri Dec 28 17:07:18 2007 +0100
5595 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
5597 This patch adds some BSP commands and FPGA booting support
5598 for esd's PMC440 boards.
5600 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5602 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
5603 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5604 Date: Fri Dec 28 17:07:14 2007 +0100
5606 ppc4xx: Add initial esd PMC440 board files
5608 This patch adds the first files for the new esd PMC440 boards.
5609 The next two patches will complete the PMC440 board support.
5611 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5613 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
5614 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5615 Date: Fri Dec 28 17:10:36 2007 +0100
5617 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
5619 - add EEPROM write protection for esd PLU405 boards.
5620 - initialize NAND GPIOs
5621 - use correct io accessors
5624 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5626 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
5627 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5628 Date: Fri Dec 28 17:10:44 2007 +0100
5630 ppc4xx: use correct io accessors for esd's LCD code
5632 This patch fixes esd's LCD dectection code to work correctly with
5635 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5637 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
5638 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5639 Date: Fri Dec 28 17:10:42 2007 +0100
5641 ppc4xx: Maintenance patch for VOH405 boards
5643 - add EEPROM write protection
5644 - initialize NAND GPIOs
5645 - use correct io accessors
5646 - slow down I2C clock to 100kHz
5647 - enable ext. I2C bus
5650 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5652 commit c05569066dbcba3fdf36d4d1943df265dc316a86
5653 Author: Stefan Roese <sr@denx.de>
5654 Date: Fri Dec 28 16:08:08 2007 +0100
5656 ppc4xx: Enable 405EP PCI arbiter per default on all boards
5658 In an attmemt to clean up the 4xx start.S file, I removed the enabling
5659 of the internal 405EP PCI arbiter. This is needed for multiple other
5660 405EP platforms, like most of the esd 405EP. Now the internal PCI
5661 arbiter is enabled again per default as it has been before.
5663 Signed-off-by: Stefan Roese <sr@denx.de>
5664 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5666 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
5667 Author: Stefan Roese <sr@denx.de>
5668 Date: Fri Dec 28 15:53:46 2007 +0100
5670 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
5672 Signed-off-by: Stefan Roese <sr@denx.de>
5673 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5675 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
5676 Author: Stefan Roese <sr@denx.de>
5677 Date: Fri Dec 28 06:06:04 2007 +0100
5679 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
5681 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
5682 platforms mentioned above.
5684 Signed-off-by: Stefan Roese <sr@denx.de>
5686 commit b568fd25574181a3b12ae3d66b2913903442cb83
5687 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5688 Date: Thu Dec 27 17:03:46 2007 +0100
5690 Remove CPCI440 board
5692 This board never left prototyping state and it
5693 became a millstone round my neck. So remove it.
5695 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5697 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
5698 Author: Larry Johnson <lrj@arlinx.com>
5699 Date: Thu Dec 27 11:28:51 2007 -0500
5701 Add support for Korat PPC440EPx board
5703 These patches add support for the PPC440EPx-based "Korat" board to
5704 U-Boot. They are based primarily on support for the Sequoia board.
5706 Signed-off-by: Larry Johnson <lrj@acm.org>
5708 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
5709 Author: Larry Johnson <lrj@arlinx.com>
5710 Date: Sat Dec 22 15:16:25 2007 -0500
5712 Add configuration file for Korat board
5714 This patch supplies the configuration file for the Korat PPC440EPx-
5717 Signed-off-by: Larry Johnson <lrj@acm.org>
5719 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
5720 Author: Larry Johnson <lrj@arlinx.com>
5721 Date: Sat Dec 22 15:16:11 2007 -0500
5723 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
5725 Signed-off-by: Larry Johnson <lrj@acm.org>
5727 commit aba19604d848b2838cfb9ebe818909e6a216058e
5728 Author: Larry Johnson <lrj@arlinx.com>
5729 Date: Thu Dec 27 10:54:48 2007 -0500
5731 Add 440EPx DDR2 SPD DIMM support
5733 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
5734 controller. It should also work on the 440GRx. It is based on the DDR2
5735 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
5737 This code has been tested on prototype Korat boards with three Kingston
5738 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
5739 (two ranks). The Korat board has a single DIMM socket, but support has
5740 been provided (though not tested) for boards with two DIMM sockets.
5742 Signed-off-by: Larry Johnson <lrj@acm.org>
5744 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
5745 Author: Larry Johnson <lrj@arlinx.com>
5746 Date: Sat Dec 22 15:15:30 2007 -0500
5748 Copy 440EPx/GRx SDRAM data-eye search to common directory
5750 This patch creates a non-board-specific file for performing the SDRAM
5751 data-eye search. It also adds ECC error checking to the test of valid
5752 data on readback when ECC is enabled.
5754 Signed-off-by: Larry Johnson <lrj@acm.org>
5756 commit c46f53333b22b1f9098676bea8884fc7db820cf3
5757 Author: Larry Johnson <lrj@arlinx.com>
5758 Date: Sat Dec 22 15:15:13 2007 -0500
5760 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
5762 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
5763 It also fixes two typos in the definitions, so the board-specific
5764 "sdram.h" files containing these definitions are also fixed to avoid
5767 Signed-off-by: Larry Johnson <lrj@acm.org>
5769 commit c348578bf612d0c56d8d376d23cae16defbd86af
5770 Author: Larry Johnson <lrj@arlinx.com>
5771 Date: Thu Dec 27 10:50:55 2007 -0500
5773 Add Ethernet 1000BASE-X support for PPC4xx
5775 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
5776 is defined, the PHY will advertise it's capabilities for autonegotiation
5777 based on the capabilities shown in the PHY's status registers, including
5778 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
5779 advertise hard-coded capabilities, as before.
5781 Signed-off-by: Larry Johnson <lrj@acm.org>
5783 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
5784 Author: Larry Johnson <lrj@arlinx.com>
5785 Date: Thu Dec 27 09:52:17 2007 -0500
5787 Add driver for National Semiconductor LM73 temperature sensor
5789 This driver is based on the driver for the LM75.
5791 Signed-off-by: Larry Johnson <lrj@acm.org>
5793 commit 12618278688ea9b3d76536960a5ad2e3790fac40
5794 Author: Larry Johnson <lrj@arlinx.com>
5795 Date: Sat Dec 22 15:14:00 2007 -0500
5797 Add driver for STMicroelectronics M41T60 RTC
5799 This driver is based on the driver for the M41T11. In the intended
5800 application, the RTC will be powered by a large capacitor, rather than a
5801 battery. The driver therefore checks to see whether the RTC has lost
5802 power. The chip's OUT bit is normally reset from its power-up state. If
5803 the OUT bit is read as set, or if the date and time are not valid, then the
5804 RTC is assumed to have lost power, and its date and time are reset to
5805 1900-01-01 00:00:00.
5807 Support for adjusting the speed of the clock to improve accuracy is
5808 provided through an environment variable.
5810 Signed-off-by: Larry Johnson <lrj@acm.org>
5812 commit d3471173e14b7544bb60339eda8d3d3906694b0a
5813 Author: Larry Johnson <lrj@arlinx.com>
5814 Date: Sat Dec 22 15:34:39 2007 -0500
5816 Use out_be32() and friends to access memory-mapped registers in sequoia.c
5818 Signed-off-by: Larry Johnson <lrj@acm.org>
5820 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
5821 Author: Larry Johnson <lrj@arlinx.com>
5822 Date: Sat Dec 22 15:34:20 2007 -0500
5824 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
5826 Signed-off-by: Larry Johnson <lrj@acm.org>
5828 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
5829 Author: Larry Johnson <lrj@arlinx.com>
5830 Date: Sat Dec 22 15:23:50 2007 -0500
5832 Cosmetic changes to ECC POST for AMCC Denali core
5834 Signed-off-by: Larry Johnson <lrj@acm.org>
5836 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
5837 Author: Stefan Roese <sr@denx.de>
5838 Date: Wed Dec 26 20:20:19 2007 +0100
5840 ppc4xx: Fix compilation problem in 405 cache POST test
5842 Signed-off-by: Stefan Roese <sr@denx.de>
5844 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
5845 Author: Stefan Roese <sr@denx.de>
5846 Date: Sat Dec 22 12:20:09 2007 +0100
5848 ppc4xx: Move virtual address of POST cache test to bigger address
5850 On Sequoia & LWMON5 the virtual address of the POST cache test is now
5851 moved to a bigger address. This enables usage of more memory on those
5854 Signed-off-by: Stefan Roese <sr@denx.de>
5856 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
5857 Author: Stefan Roese <sr@denx.de>
5858 Date: Sat Dec 22 12:18:26 2007 +0100
5860 ppc4xx: Fix problem in 44x cache POST routine
5862 As repoted by Larry Johnson, running "diag run cache" caused a crash
5863 in U-Boot. This problem was introduced by a patch that removed the
5864 TLB entry for the cache test after the test has completed. Since this
5865 TLB was only setup once, a 2nd attempt to run this cache test
5866 failed with a crash. Now this TLB entry is created every time the
5869 Signed-off-by: Stefan Roese <sr@denx.de>
5871 commit b0265b576bb8fa9465f99e99c323768b562fadc2
5872 Author: Stefan Roese <sr@denx.de>
5873 Date: Fri Dec 21 07:51:29 2007 +0100
5875 ppc4xx: Update Makalu fdt support
5877 Signed-off-by: Stefan Roese <sr@denx.de>
5879 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
5880 Author: Stefan Roese <sr@denx.de>
5881 Date: Wed Dec 19 09:05:40 2007 +0100
5883 ppc4xx: Add fdt support to AMCC Katmai eval board
5885 Signed-off-by: Stefan Roese <sr@denx.de>
5887 commit 328a340392a5df9aaf00792be989df73e750859e
5888 Author: Stefan Roese <sr@denx.de>
5889 Date: Tue Dec 18 08:44:51 2007 +0100
5891 ppc4xx: fdt: Cleanup setup of cpu node setup
5893 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
5894 without using the absolute path to the cpu node. This makes it possible
5895 to use this U-Boot version with both versions of cpu-node naming
5896 "cpu@0" and the former "PowerPC,440EPx@0".
5898 Signed-off-by: Stefan Roese <sr@denx.de>
5900 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
5901 Author: Stefan Roese <sr@denx.de>
5902 Date: Mon Dec 17 17:26:21 2007 +0100
5904 ppc4xx: Fix lwmon5 compilation problem
5906 Now that the 440EPx ECC test is not board specific anymore
5907 remove this Makefile.
5909 Signed-off-by: Stefan Roese <sr@denx.de>
5911 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
5912 Author: Anatolij Gustschin <agustschin@t-online.de>
5913 Date: Wed Dec 5 17:43:20 2007 +0100
5915 Fix ppc4xx clear_bss() code
5917 ppc4xx clear_bss() fails if BSS segment size is not
5918 divisible by 4 without remainder. This patch provides
5919 fix for this problem.
5921 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5923 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
5924 Author: Niklaus Giger <niklausgiger@gmx.ch>
5925 Date: Fri Nov 30 18:35:11 2007 +0100
5927 PPC4xx: Minimal changes to add vxWorks support
5929 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5931 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
5932 Author: Markus Klotzbücher <mk@denx.de>
5933 Date: Fri Nov 23 13:09:18 2007 +0100
5935 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
5937 When using dhcp/bootp the "netmask" environment variable is not
5938 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
5939 desireable, so the following patch adds this this option to the board
5942 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5943 Signed-off-by: Stefan Roese <sr@denx.de>
5945 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
5946 Author: Larry Johnson <lrj@arlinx.com>
5947 Date: Sat Oct 27 12:48:15 2007 -0400
5949 Fix/enhance ECC POST for 440EPx/GRx
5951 This patch allows the ECC POST to be used for different boards with the
5952 PPC440 Denali SDRAM controller. Modifications include skipping the test
5953 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
5954 to prevent timing errors.
5956 Signed-off-by: Larry Johnson <lrj@acm.org>
5958 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
5959 Author: Larry Johnson <lrj@arlinx.com>
5960 Date: Sat Oct 27 12:48:05 2007 -0400
5962 PPC4xx: Move/rename ECC POST for 440EPx/GRx
5964 Signed-off-by: Larry Johnson <lrj@acm.org>
5966 commit c29d2d3680046d430022c55e50fcb27f5866517e
5967 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5968 Date: Fri Dec 14 11:20:33 2007 +0100
5970 ppc4xx: use correct io accessors for 4xx ethernet POST
5972 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5974 commit ba79fde58a48c0a6ff8e2a96caba951594142203
5975 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5976 Date: Fri Dec 14 11:19:56 2007 +0100
5978 ppc4xx: fix flush + invalidate_dcache_range arguments
5980 flush + invalidate_dcache_range() expect the start and stop+1 address.
5981 So the stop address is the first address behind (!) the range.
5983 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5985 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
5986 Author: Stefan Roese <sr@denx.de>
5987 Date: Fri Dec 14 08:41:29 2007 +0100
5989 ppc4xx: fdt: use fdt_fixup_ethernet()
5991 By using aliases in the dts file, the ethernet node fixup is
5992 much easier with the recently added functions.
5994 Please note that the dts file needs the aliases for this to work.
5996 Signed-off-by: Stefan Roese <sr@denx.de>
5998 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
5999 Author: Stefan Roese <sr@denx.de>
6000 Date: Thu Dec 13 14:52:53 2007 +0100
6002 ppc4xx: Bring 4xx fdt support up-to-date
6004 This patch update the 4xx fdt support. It enabled fdt booting
6005 on the AMCC Kilauea and Sequoia for now. More can follow later
6008 Signed-off-by: Stefan Roese <sr@denx.de>
6010 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
6011 Author: Stefan Roese <sr@denx.de>
6012 Date: Thu Dec 27 07:50:54 2007 +0100
6014 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
6016 The check for an sufficiently erased destination was missing in the
6017 buffered write function of the cfi flash driver (when
6018 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
6019 writing to such a region will fail with the currect error message.
6021 Signed-off-by: Stefan Roese <sr@denx.de>
6023 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
6024 Author: Martin Krause <martin.krause@tqs.de>
6025 Date: Mon Nov 12 10:56:17 2007 +0100
6027 Some configuration updates for the TQM5200 based TB5200 board:
6029 - enable command line history
6030 - increase malloc space (because of bigger flash sectors)
6032 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6034 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
6035 Author: Martin Krause <martin.krause@tqs.de>
6036 Date: Thu Sep 27 11:10:08 2007 +0200
6038 TQM8xx: use the CFI flash driver on all TQM8xx boards
6040 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6042 commit 11d9eec479b470eab9242ab937fca70a876d9376
6043 Author: Martin Krause <martin.krause@tqs.de>
6044 Date: Wed Sep 26 17:55:56 2007 +0200
6046 TQM885D: adjust for doubled flash sector size + some minor fixes
6048 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6050 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
6051 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
6052 Date: Wed Sep 26 17:55:54 2007 +0200
6054 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
6056 CAS-Latency=2, Write Recovery Time tWR=2
6057 The max. supported bus frequency is 66 MHz. Therefore, changed
6058 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
6060 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6062 commit b988b8cd443989be65161888eea0127ad03f846f
6063 Author: Martin Krause <martin.krause@tqs.de>
6064 Date: Wed Sep 26 17:55:56 2007 +0200
6066 TQM885D: use calculated cpuclk instead of measuring it
6068 On the TQM885D the measurement of cpuclk with the PIT reference
6069 timer ist not necessary. Since all module variants use the same
6070 external 10 MHz oscillator, the cpuclk only depends on the PLL
6071 configuration - which is readable by software.
6073 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6075 commit 492c7049869348d31168de8dad89651315e468e0
6076 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
6077 Date: Thu Sep 27 14:54:46 2007 +0200
6079 TQM885D: fix SDRAM refresh
6081 At 133 MHz the current SDRAM refresh rate is too fast
6082 (measured 4 * 1.17 us).
6083 CFG_MAMR_PTA changes from 39 to 128. This result
6084 in a refresh rate of 4 * 7.8 us at the default clock
6085 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
6086 This is a compromise until a new method is found to
6087 adjust the refresh rate.
6089 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6091 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
6092 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
6093 Date: Thu Sep 27 14:54:46 2007 +0200
6095 TQM860M: Support for 10col SDRAMs, max. 128 MiB
6097 Signed-off-by: Martin Krause <martin.krause@tqs.de>
6099 commit 61fb15c516fef5631e305f1976d7b3a679725856
6100 Author: Wolfgang Denk <wd@denx.de>
6101 Date: Thu Dec 27 01:52:50 2007 +0100
6103 Fix coding style issues; update CHANGELOG.
6105 Signed-off-by: Wolfgang Denk <wd@denx.de>
6107 commit 467bcee11fe26ad422f2de971aa70866079870f2
6108 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6109 Date: Fri Dec 14 15:36:18 2007 +0100
6111 cfi_flash: Add manufacturer-specific fixups
6113 Run fixups based on the JEDEC manufacturer ID independent of the
6116 This changes current behaviour: Previously, geometry reversal for AMD
6117 chips were done based on the command set ID, while they are now done
6118 based on the JEDEC manufacturer and device ID.
6120 Also add fixup for top-boot Atmel chips. A fixup is needed for
6121 AT49BV6416(T) too, but since u-boot currently only reads the low byte
6122 of the device ID, there's no way to tell it apart from AT49BV642D,
6123 which should not have this fixup. Since AT49BV642D support is
6124 necessary to get ATNGW100 board support into mainline, I've commented
6125 out the fixup for now.
6127 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6129 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
6130 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6131 Date: Fri Dec 14 15:36:17 2007 +0100
6133 cfi_flash: Add cmdset-specific init functions
6135 Move things like reading JEDEC IDs and fixing up geometry reversal
6136 into separate functions. The geometry reversal fixup is now performed
6137 by altering the qry structure directly, which makes the sector init
6138 code slightly cleaner.
6140 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6142 commit e23741f4a6d8047520ef0d4971762749b3587d32
6143 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6144 Date: Fri Dec 14 15:36:16 2007 +0100
6146 cfi_flash: Read whole QRY structure in one go
6148 Read out the whole CFI Standard Query structure after successful cfi
6149 identification. This allows subsequent code to access this information
6150 directly without having to go through flash_read_uchar() and friends.
6152 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6154 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
6155 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6156 Date: Mon Dec 17 11:02:44 2007 +0100
6158 AVR32: Fix logic inversion in disable_interrupts()
6160 disable_interrupts() should return nonzero if interrupts were
6161 _enabled_ before, not disabled.
6163 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6165 commit acac475212cbedb17b321a363a1c878e2b47b37f
6166 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6167 Date: Fri Dec 14 16:51:22 2007 +0100
6169 AVR32: Enable interrupts at bootup
6171 The timer code depends on the timer interrupt to keep track of the
6172 upper 32 bits of the cycle counter. This obviously doesn't work when
6173 interrupts are disabled the whole time.
6175 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6177 commit 9570bcd87f4db255514f43b6701746c412f8fef0
6178 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6179 Date: Thu Nov 15 10:03:45 2007 +0100
6181 AVR32: Fix wrong pin setup for USART3
6183 As reported by Gerhard Berghofer:
6185 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
6186 instead of PB18 and PB19.
6188 which is obviously correct. There's currently no code that uses
6189 USART3, but custom boards may run into problems.
6191 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6193 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
6194 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6195 Date: Thu Nov 1 12:44:20 2007 +0100
6197 README: Remove ATSTK1000 daughterboard list
6199 As noted by Kim Phillips, these lists tend to become out of date.
6201 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6203 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
6204 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6205 Date: Tue Oct 30 14:56:36 2007 +0100
6207 Add ATSTK100[234] to MAINTAINERS
6209 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
6210 "mother". Also update the entry for ATSTK1000 to be not only about the
6211 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
6213 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6215 commit 64ff2357b1727213803591813dbc779c924bf772
6216 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6217 Date: Mon Oct 29 13:02:54 2007 +0100
6219 AVR32: Add support for the ATSTK1004 board
6221 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
6222 which is a derivative of AT32AP7000.
6224 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6226 commit 667568db157f374b85abd7e03596ddd1f0b25681
6227 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6228 Date: Mon Oct 29 13:02:54 2007 +0100
6230 AVR32: Add support for the ATSTK1003 board
6232 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
6233 which is a derivative of AT32AP7000.
6235 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6237 commit 5fee84a794a51ec830548cda485a770efb018b92
6238 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6239 Date: Mon Oct 29 13:23:33 2007 +0100
6241 AVR32: Make some AT32AP700x peripherals optional
6243 Add a chip-features file providing definitions of the form
6245 AT32AP700x_CHIP_HAS_<peripheral>
6247 to indicate the availability of the given peripheral on the currently
6250 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6252 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
6253 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6254 Date: Mon Oct 29 13:09:56 2007 +0100
6256 AVR32: Rename at32ap7000 -> at32ap700x
6258 The SoC-specific code for all the AT32AP700x CPUs is practically
6259 identical; the only difference is that some chips have less features
6260 than others. By doing this rename, we can add support for the AP7000
6261 derivatives simply by making some features conditional.
6263 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6265 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
6266 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6267 Date: Fri Jun 29 18:22:34 2007 +0200
6269 atmel_mci: Show SR when block read fails
6271 Show controller status as well as card status when an error occurs
6274 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6276 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
6277 Author: Stefan Roese <sr@denx.de>
6278 Date: Thu Dec 13 14:52:53 2007 +0100
6280 ppc4xx: Bring 4xx fdt support up-to-date
6282 This patch update the 4xx fdt support. It enabled fdt booting
6283 on the AMCC Kilauea and Sequoia for now. More can follow later
6286 Signed-off-by: Stefan Roese <sr@denx.de>
6288 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
6289 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6290 Date: Thu Dec 13 12:56:34 2007 +0100
6292 cfi_flash: Use map_physmem() and unmap_physmem()
6294 Use map_physmem() and unmap_physmem() to convert from physical to
6295 virtual addresses. This gives the arch a chance to provide an uncached
6296 mapping for flash accesses.
6298 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6300 commit 4d7d6936eb29af7cca330937808312aa5f61454d
6301 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6302 Date: Thu Dec 13 12:56:33 2007 +0100
6304 Introduce map_physmem() and unmap_physmem()
6306 map_physmem() returns a virtual address which can be used to access a
6307 given physical address without involving the cache. unmap_physmem()
6308 should be called when the virtual address returned by map_physmem() is
6311 This patch adds a stub implementation which simply returns the
6312 physical address cast to a uchar * for all architectures except AVR32,
6313 which converts the physical address to an uncached virtual mapping.
6314 unmap_physmem() is a no-op on all architectures, but if any
6315 architecture needs to do such mappings through the TLB, this is the
6316 hook where those TLB entries can be invalidated.
6318 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6320 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
6321 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6322 Date: Thu Dec 13 12:56:32 2007 +0100
6324 cfi_flash: Introduce read and write accessors
6326 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
6327 them to access the flash memory. This makes it clearer when the flash
6328 is actually being accessed; merely dereferencing a volatile pointer
6329 looks just like any other kind of access.
6331 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6333 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
6334 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6335 Date: Thu Dec 13 12:56:31 2007 +0100
6337 Implement __raw_{read,write}[bwl] on all architectures
6339 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
6340 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
6343 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6345 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
6346 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6347 Date: Sat Oct 6 18:55:36 2007 +0200
6349 cfi_flash: Reorder functions and eliminate extra prototypes
6351 Reorder the functions in cfi_flash.c so that each function only uses
6352 functions that have been defined before it. This allows the static
6353 prototype declarations near the top to be eliminated and might allow
6354 gcc to do a better job inlining functions.
6356 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6358 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
6359 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6360 Date: Thu Dec 13 12:56:29 2007 +0100
6362 cfi_flash: Make some needlessly global functions static
6364 Make functions not declared in any header file static.
6366 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6368 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
6369 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6370 Date: Thu Dec 13 12:56:28 2007 +0100
6372 cfi_flash: Break long lines
6374 This patch tries to keep all lines in the cfi_flash driver below 80
6375 columns. There are a few lines left which don't fit this requirement
6376 because I couldn't find any trivial way to break them (i.e. it would
6377 take some restructuring, which I intend to do in a later patch.)
6379 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6381 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
6382 Author: Bartlomiej Sieka <tur@semihalf.com>
6383 Date: Tue Dec 11 13:59:57 2007 +0100
6385 CFI: synchronize command offsets with Linux CFI driver
6387 Fixes non-working CFI Flash on the Inka4x0 board.
6389 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
6391 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
6392 Author: Kumar Gala <galak@kernel.crashing.org>
6393 Date: Fri Dec 7 12:17:34 2007 -0600
6395 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
6397 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
6398 (MPC8544DS, MPC8548CDS, MPC8568MDS).
6400 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6402 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
6403 Author: Kumar Gala <galak@kernel.crashing.org>
6404 Date: Fri Dec 7 12:04:30 2007 -0600
6406 Update Freescale MPC85xx ADS/CDS/MDS board config
6408 * Enabled CONFIG_CMD_ELF
6410 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6412 commit d435793229ce29a42797c1edc39f5b34f987f91a
6413 Author: Kumar Gala <galak@kernel.crashing.org>
6414 Date: Fri Dec 7 04:59:26 2007 -0600
6416 Handle Asynchronous DDR clock on 85xx
6418 The MPC8572 introduces the concept of an asynchronous DDR clock with
6419 regards to the platform clock.
6421 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
6424 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6426 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
6427 Author: Kumar Gala <galak@kernel.crashing.org>
6428 Date: Thu Nov 29 10:34:28 2007 -0600
6430 Update Freescale MPC85xx ADS/CDS/MDS board config
6432 * Removed some misc environment setup
6433 * Enabled CONFIG_CMDLINE_EDITING
6435 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6437 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
6438 Author: Kumar Gala <galak@kernel.crashing.org>
6439 Date: Thu Nov 29 10:47:44 2007 -0600
6441 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
6443 Minor path corrections needed to ensure buildability.
6445 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6447 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
6448 Author: Kumar Gala <galak@kernel.crashing.org>
6449 Date: Thu Nov 29 10:16:18 2007 -0600
6451 Move the MPC8540 ADS board under board/freescale.
6453 Minor path corrections needed to ensure buildability.
6455 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6457 commit 870ceac5b3a3486c109396e005af81ae762b5710
6458 Author: Kumar Gala <galak@kernel.crashing.org>
6459 Date: Thu Nov 29 10:14:50 2007 -0600
6461 Move the MPC8560 ADS board under board/freescale.
6463 Minor path corrections needed to ensure buildability.
6465 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6467 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
6468 Author: Kumar Gala <galak@kernel.crashing.org>
6469 Date: Thu Nov 29 10:13:47 2007 -0600
6471 Move the MPC8568 MDS board under board/freescale.
6473 Minor path corrections needed to ensure buildability.
6475 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6477 commit a853d56c59b33415304531443633808736acfc6e
6478 Author: Kumar Gala <galak@kernel.crashing.org>
6479 Date: Thu Nov 29 02:18:59 2007 -0600
6481 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
6483 We already had defines for LAWAR_TRGT_IF_* that we should use
6484 rather than creating new ones. Also, added some missing defines for
6487 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6489 commit 04db400892da37b76a585e332a0c137954ad2015
6490 Author: Kumar Gala <galak@kernel.crashing.org>
6491 Date: Thu Nov 29 02:10:09 2007 -0600
6493 Stop using immap_t on 85xx
6495 In the future the offsets to various blocks may not be in same location.
6496 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
6497 instead of getting it via &immap.
6499 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6501 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
6502 Author: Kumar Gala <galak@kernel.crashing.org>
6503 Date: Thu Nov 29 01:23:09 2007 -0600
6505 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
6507 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6509 commit c480861bf000156e6a3e932c258db59ff2212dd3
6510 Author: Kumar Gala <galak@kernel.crashing.org>
6511 Date: Thu Nov 29 01:06:19 2007 -0600
6513 Update MPC8568 MDS to use libfdt
6515 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
6516 ethernet, pci, and serial for the various fixups that are done.
6518 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6520 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
6521 Author: Haiying Wang <Haiying.Wang@freescale.com>
6522 Date: Wed Nov 14 15:52:06 2007 -0500
6524 Add PCI Express support on MPC8568MDS
6526 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6527 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6529 commit b90d25497625b90ffa3f2911a0895ca237556ff5
6530 Author: Kumar Gala <galak@kernel.crashing.org>
6531 Date: Thu Nov 29 00:11:44 2007 -0600
6533 Update MPC85xx CDS to use libfdt
6535 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
6536 ethernet, pci, and serial for the various fixups that are done.
6538 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6540 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
6541 Author: Kumar Gala <galak@kernel.crashing.org>
6542 Date: Wed Nov 28 22:54:27 2007 -0600
6544 Update MPC8540 ADS to use libfdt
6546 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
6547 ethernet, pci, and serial for the various fixups that are done.
6549 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6551 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
6552 Author: Kumar Gala <galak@kernel.crashing.org>
6553 Date: Wed Nov 28 22:40:31 2007 -0600
6555 Update MPC8560 ADS to use libfdt
6557 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
6558 ethernet, pci, and serial for the various fixups that are done.
6560 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6562 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
6563 Author: Kumar Gala <galak@kernel.crashing.org>
6564 Date: Wed Nov 28 00:36:33 2007 -0600
6566 Stop using immap_t for cpm offset on 85xx
6568 In the future the offsets to various blocks may not be in same location.
6569 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
6570 instead of getting it via &immap->im_cpm.
6572 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6574 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
6575 Author: Kumar Gala <galak@kernel.crashing.org>
6576 Date: Tue Nov 27 23:25:02 2007 -0600
6578 Stop using immap_t for guts offset on 85xx
6580 In the future the offsets to various blocks may not be in same location.
6581 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
6582 instead of getting it via &immap->im_gur.
6584 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6586 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
6587 Author: Kumar Gala <galak@kernel.crashing.org>
6588 Date: Tue Nov 27 22:42:34 2007 -0600
6590 Update MPC8544 DS config
6592 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
6593 * Removed some misc environment setup
6594 * Moved to using fdtfile & fdtaddr as fdt env var names
6595 * Enabled CONFIG_CMDLINE_EDITING
6597 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6599 commit addce57e2e4c49e77ffb2020a84690713bb18b47
6600 Author: Kumar Gala <galak@kernel.crashing.org>
6601 Date: Mon Nov 26 17:12:24 2007 -0600
6603 Update MPC8544DS to use libfdt
6605 Updated the MPC8544DS config to use libfdt and assume use of aliases for
6606 ethernet, pci, and serial for the various fixups that are done.
6608 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6610 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
6611 Author: Kumar Gala <galak@kernel.crashing.org>
6612 Date: Thu Nov 29 00:15:30 2007 -0600
6614 Add libfdt based ft_cpu_setup for mpc85xx
6616 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6618 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
6619 Author: Stefan Roese <sr@denx.de>
6620 Date: Tue Dec 11 13:38:19 2007 +0100
6622 ppc4xx: Correct GPIO offset in gpio_config()
6624 Thanks to Gary Jennejohn for pointing this out.
6626 Signed-off-by: Stefan Roese <sr@denx.de>
6628 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
6629 Author: Stefan Roese <sr@denx.de>
6630 Date: Tue Dec 11 11:46:01 2007 +0100
6632 rtc: Fix merging problem
6634 Signed-off-by: Stefan Roese <sr@denx.de>
6636 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
6637 Author: Stefan Roese <sr@denx.de>
6638 Date: Sat Dec 8 14:47:34 2007 +0100
6640 ppc4xx: 405EX: Correctly enable USB pins
6642 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
6643 function control) registers. This is done for the AMCC Kilauea and
6646 Signed-off-by: Stefan Roese <sr@denx.de>
6648 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
6649 Author: Stefan Roese <sr@denx.de>
6650 Date: Sat Dec 8 08:25:09 2007 +0100
6652 CFI: Coding style cleanup
6654 Signed-off-by: Stefan Roese <sr@denx.de>
6656 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
6657 Author: Michael Schwingen <michael@schwingen.org>
6658 Date: Fri Dec 7 23:35:02 2007 +0100
6660 CFI: support JEDEC flash roms in CFI-flash framework
6662 The following patch adds support for non-CFI flash ROMS, by hooking into the
6663 CFI flash code and using most of its code, as recently discussed here in the
6664 thread "Mixing CFI and non-CFI flashs".
6666 Signed-off-by: Michael Schwingen <michael@schwingen.org>
6667 Signed-off-by: Stefan Roese <sr@denx.de>
6669 commit c01b17dd856fa120b2970f50d9598546a4927ec3
6670 Author: Gerald Van Baren <vanbaren@cideas.com>
6671 Date: Wed Nov 28 21:24:50 2007 -0500
6673 Conditionally compile fdt_fixup_ethernet()
6675 Fix compiler warnings: On boards that don't have ethernets defined,
6676 don't compile fdt_fixup_ethernet().
6678 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
6679 Author: Kumar Gala <galak@kernel.crashing.org>
6680 Date: Tue Nov 27 21:59:46 2007 -0600
6682 Convert boards that set memory node to use fdt_fixup_memory()
6684 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6686 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
6687 Author: Kumar Gala <galak@kernel.crashing.org>
6688 Date: Mon Nov 26 17:06:15 2007 -0600
6690 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
6692 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
6693 determine which serial alias we should set linux,stdout-path to.
6695 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6697 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
6698 Author: Kumar Gala <galak@kernel.crashing.org>
6699 Date: Mon Nov 26 14:57:45 2007 -0600
6701 Add common memory fixup function
6703 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
6705 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6707 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
6708 Author: Kumar Gala <galak@kernel.crashing.org>
6709 Date: Mon Nov 26 11:19:12 2007 -0600
6711 Conditionally compile fdt_support.c
6713 Modify common/Makefile to conditionally compile fdt_support.c based
6714 on CONFIG_OF_LIBFDT.
6716 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6718 commit d88e7ba0980773479e1a64badb293116071b7ef0
6719 Author: Kumar Gala <galak@kernel.crashing.org>
6720 Date: Mon Nov 26 10:41:40 2007 -0600
6722 Fix build breakage due to libfdt import
6724 The IDS8247 got lost in the update and need an API update
6725 do to rename of functions in libfdt.
6727 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6729 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
6730 Author: Gerald Van Baren <vanbaren@cideas.com>
6731 Date: Fri Nov 23 19:43:20 2007 -0500
6733 Add spaces around the = in the fdt print format.
6735 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
6737 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
6738 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6739 Date: Fri Dec 7 01:25:38 2007 +0900
6741 sh: Moved driver of the SuperH dependence
6743 The composition of the directory in the drivers/ changed.
6744 I moved SuperH serial driver and marubun PCMCIA driver.
6746 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6748 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
6749 Author: Wolfgang Denk <wd@denx.de>
6750 Date: Thu Dec 6 10:21:19 2007 +0100
6754 Signed-off-by: Wolfgang Denk <wd@denx.de>
6756 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
6757 Author: Wolfgang Denk <wd@denx.de>
6758 Date: Thu Dec 6 10:21:03 2007 +0100
6760 ADS5121 Board: fix compile problem.
6762 Signed-off-by: Wolfgang Denk <wd@denx.de>
6764 commit a27044b14a9e93678a82d7b35f202b93e7687abc
6765 Author: Stefan Roese <sr@denx.de>
6766 Date: Thu Dec 6 05:58:43 2007 +0100
6768 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
6770 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
6771 setting the FIXD bit in the SDR0_MFR register. Here a description of the
6775 ------------------------------
6776 If a DMA is performed between memory and PCI with the DMA 1 Controller
6777 using prefetch, and as a result uses a special purpose buffer selected by
6778 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
6779 the first part of the transfer sequence is performed twice. The
6780 PPC440SPe PCI Controller requests more data than was needed such that in
6781 the case of enforce memory protection, a host CPU exception can occur.
6782 No data is corrupted, because data transfer is stopped in the PCI
6783 Controller. Prefetch enable is specified by setting DMA Configuration
6784 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
6786 Behavior that may be observed in a running system
6787 ---------------------------------------------------------------------------
6789 1. DMA performance is decreased because of the double access on the PCI bus
6791 2. If an illegal access to some address on the PCI bus is detected at the
6792 system level, a machine check or similar system error may occur.
6794 Workarounds Available
6795 ----------------------------------
6797 1. Do not program prefetch. Note that a prefetch command cannot be programmed
6798 without selecting a special purpose buffer.
6799 2. To avoid crossing a physical boundary of the PCI slave device, add 512
6800 bytes of address to the PCI address range.
6802 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
6803 from AMCC and slighly changed.
6805 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
6806 Signed-off-by: Stefan Roese <sr@denx.de>
6808 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
6809 Author: Stefan Roese <sr@denx.de>
6810 Date: Tue Dec 4 16:29:48 2007 +0100
6812 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
6814 Signed-off-by: Stefan Roese <sr@denx.de>
6816 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
6817 Author: Wolfgang Denk <wd@denx.de>
6818 Date: Mon Dec 3 00:15:28 2007 +0100
6820 Prepare for 1.3.1-rc1
6822 Signed-off-by: Wolfgang Denk <wd@denx.de>
6824 commit e15e33433e7c05111968dc9b434a52fd42cbd221
6825 Author: Stefan Roese <sr@denx.de>
6826 Date: Fri Nov 30 07:15:41 2007 +0100
6828 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
6830 This manual PCIe reset triggering solves the problem seen with the
6831 Intel EPRO/1000 card, which was not detected (link not established)
6832 upon power-up reset.
6834 Signed-off-by: Stefan Roese <sr@denx.de>
6836 commit 260eea5676ca46903a335686cc020b29c4ca46fe
6837 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6838 Date: Thu Nov 29 01:21:54 2007 +0900
6840 sh: Add SuperH boards maintainer to MAINTAINERS file
6842 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
6844 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6846 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
6847 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6848 Date: Thu Nov 29 00:13:04 2007 +0900
6850 sh: Add ms7750se support in MAKEALL
6852 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6854 commit c7144373427a178332bf9754131c8c34c52c200a
6855 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6856 Date: Tue Nov 27 09:44:53 2007 +0100
6858 sh: Add sh3 and sh4 support in MAKEALL
6860 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6861 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6863 commit 130080874a3d28450098481a262c5f7c855e908d
6864 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6865 Date: Sun Nov 25 02:51:17 2007 +0900
6867 sh: Add document for SuperH.
6869 This document is a summary of information concerning SuperH of U-Boot.
6871 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6873 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
6874 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6875 Date: Sun Nov 25 02:39:31 2007 +0900
6877 sh: Add marubun's pcmcia driver
6879 Marubun pcmcia is a chip for PCMCIA used with SuperH.
6880 Of course, this can be used even by other architectures.
6881 When use this driver, came to be able to use CompactFlash
6884 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6886 commit febd86b969b975289ed948f1ac0eb9722da41ced
6887 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6888 Date: Sun Nov 25 02:32:13 2007 +0900
6890 sh: Update SuperH SCIF driver
6892 - Changed volatile unsigned to vu_.
6893 - Changed Makefile for kconfig.
6895 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6897 commit 8be760903645af09871be50ad0a6f9ebb62b311d
6898 Author: Stefan Roese <sr@denx.de>
6899 Date: Tue Nov 27 11:57:35 2007 +0100
6901 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
6903 After an error in the AMCC 405EX users manual now correctly configure
6904 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
6907 Signed-off-by: Stefan Roese <sr@denx.de>
6909 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
6910 Author: Wolfgang Denk <wd@denx.de>
6911 Date: Mon Nov 26 19:18:21 2007 +0100
6913 Cleanup coding style; update CHANGELOG
6915 Signed-off-by: Wolfgang Denk <wd@denx.de>
6917 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
6918 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6919 Date: Sun Nov 25 22:39:25 2007 +0100
6921 MAKEALL: add missing 512x boards in ppc
6923 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6925 commit a340c325e668ca7386c2276387681720be9c3757
6926 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6927 Date: Sun Nov 25 18:45:47 2007 +0100
6929 Makefile : fix tags ctags etags with new drivers organization
6931 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6933 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
6934 Author: Stefan Roese <sr@denx.de>
6935 Date: Mon Nov 26 15:06:14 2007 +0100
6937 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
6939 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
6942 Signed-off-by: Stefan Roese <sr@denx.de>
6944 commit ca1ce226287270bb01e25b8e3674c701f12edf19
6945 Author: Stefan Roese <sr@denx.de>
6946 Date: Mon Nov 26 15:01:45 2007 +0100
6948 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
6950 Signed-off-by: Stefan Roese <sr@denx.de>
6952 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
6953 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6954 Date: Sun Nov 25 18:45:47 2007 +0100
6956 Makefile : fix tags ctags etags with new drivers organization
6958 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6960 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
6961 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6962 Date: Sat Nov 24 21:26:56 2007 +0100
6964 drivers/mtd : move mtd drivers to drivers/mtd
6966 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6968 commit 318c0b90431f2648552e5ade78833f42652ce859
6969 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6970 Date: Sat Nov 24 21:17:55 2007 +0100
6972 drivers/misc : move misc drivers to drivers/misc
6974 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6976 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
6977 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6978 Date: Sat Nov 24 21:13:59 2007 +0100
6980 drivers/block : move block drivers to drivers/block
6982 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6984 commit 0c698dcaa70275eb8814f665b545547cee013892
6985 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6986 Date: Sat Nov 24 20:59:50 2007 +0100
6988 drivers/rtc : move rtc drivers to drivers/rtc
6990 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6992 commit f868cc5a50757d94f36c312395481cb0f187d9e6
6993 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6994 Date: Sat Nov 24 20:14:44 2007 +0100
6996 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
6998 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7000 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
7001 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7002 Date: Sat Nov 24 19:46:45 2007 +0100
7004 drivers/input : move input drivers to drivers/input
7006 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7008 commit e4558666293364fc3af1c1d9381ca933fa0f1275
7009 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7010 Date: Sat Nov 24 19:40:11 2007 +0100
7012 drivers/usb : move usb drivers to drivers/usb
7014 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7016 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
7017 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7018 Date: Sat Nov 24 19:33:38 2007 +0100
7020 drivers/serial : move serial drivers to drivers/serial
7022 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7024 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
7025 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7026 Date: Wed Nov 21 21:19:24 2007 +0100
7028 drivers/net : move net drivers to drivers/net
7030 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7032 commit 352d259130b349fe9593b8dada641bd78a9659e5
7033 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7034 Date: Tue Nov 20 20:41:48 2007 +0100
7036 drivers/video : move video drivers to drivers/video
7038 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7040 commit 73646217186aa17afc8e305c5f06f06dd335eaad
7041 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7042 Date: Tue Nov 20 20:33:09 2007 +0100
7044 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
7046 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7048 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
7049 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7050 Date: Tue Nov 20 20:28:09 2007 +0100
7052 drivers/pci : move pci drivers to drivers/pci
7054 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7056 commit 9162352817579840d7802da6d85872b3ca003c97
7057 Author: Gerald Van Baren <vanbaren@cideas.com>
7058 Date: Thu Nov 22 17:23:23 2007 -0500
7060 Fix fdt printing for updated libfdt
7062 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
7064 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
7066 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
7067 Author: Kumar Gala <galak@kernel.crashing.org>
7068 Date: Wed Nov 21 13:30:15 2007 -0600
7070 Add additional fdt fixup helper functions
7072 Added the following fdt fixup helpers:
7073 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
7074 * do_fixup_by_compat{_u32} - Find matching nodes by compat
7076 The _u32 variants work the same only the property they are setting
7077 is know to be a 32-bit integer instead of a byte buffer.
7079 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7081 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
7082 Author: Kumar Gala <galak@kernel.crashing.org>
7083 Date: Wed Nov 21 11:11:03 2007 -0600
7085 Add fdt_fixup_ethernet helper to set mac addresses
7087 Added a fixup helper that uses aliases to set mac addresses
7088 in the device tree based on the bd_t
7090 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7092 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
7093 Author: Kumar Gala <galak@kernel.crashing.org>
7094 Date: Wed Nov 21 14:07:46 2007 -0600
7096 Fix warnings from import of libfdt
7098 cmd_fdt.c: In function fdt_print:
7099 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
7100 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
7101 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
7102 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
7104 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7106 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
7107 Author: Kumar Gala <galak@kernel.crashing.org>
7108 Date: Wed Oct 24 11:04:22 2007 -0500
7110 Update libfdt from device tree compiler (dtc)
7112 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
7113 the device tree compiler (dtc) project.
7115 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7117 commit e93becf80d732b64aef81b23e8b6ece02c40533d
7118 Author: Kumar Gala <galak@kernel.crashing.org>
7119 Date: Sat Nov 3 19:46:28 2007 -0500
7121 Move do_fixup* for libfdt into common code
7123 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
7124 into common/fdt_support.c and renamed:
7126 do_fixup() -> do_fixup_by_path()
7127 do_fixup_u32() -> do_fixup_by_path_u32()
7129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7131 commit f738b4a75998f42a7408defadc9baac7a31c92db
7132 Author: Kumar Gala <galak@kernel.crashing.org>
7133 Date: Thu Oct 25 16:15:07 2007 -0500
7135 Make no options to fdt print default to '/'
7137 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7139 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
7140 Author: Kumar Gala <galak@kernel.crashing.org>
7141 Date: Wed Oct 24 10:21:57 2007 -0500
7143 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
7146 fdt_node_is_compatible
7147 fdt_find_node_by_type
7148 fdt_find_compatible_node
7150 To ease merge of newer libfdt as we aren't using them anywhere at this time.
7152 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
7155 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7157 commit 98e2867cc85409b919f862e6c16026461ec955df
7158 Author: Grant Likely <grant.likely@secretlab.ca>
7159 Date: Wed Nov 21 09:19:37 2007 -0700
7161 [BUILD] Remove libraries when updating autoconf.mk
7163 Fix library problems caused by conditional compilation. Using
7164 autoconf.mk to decide which files to compile has caused a problem when
7165 changing configuration from one board to another without clearing out
7166 the library (*.a) files.
7168 It used to be that the linker was always passed the same list of .o
7169 files when building the .a files. However, that is not longer true
7170 with conditional compilation. Now, a different board config will have
7171 a different file list passed to the linker. The problem occurs when
7172 a library has already been built and the board config is changed.
7174 Since the linker will update instead of replace a preexisting library,
7175 then if the file list changes to remove some object files the old
7176 objects will still exist in the library.
7178 The solution is to remove all old library files when autoconf.mk is
7181 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7183 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
7184 Author: Kumar Gala <galak@kernel.crashing.org>
7185 Date: Wed Nov 21 08:49:50 2007 -0600
7187 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
7189 Modify libfdt/Makefile to conditionally compile the *.c files based
7190 on the board config.
7192 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7194 commit 4a43719a7738712811d822ca8125427b27a55cdc
7195 Author: Grant Likely <grant.likely@secretlab.ca>
7196 Date: Mon Sep 24 09:05:31 2007 -0600
7198 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
7200 Modify common/Makefile to conditionally compile the cmd_*.c files based
7201 on the board config.
7203 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7205 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
7206 Author: Grant Likely <grant.likely@secretlab.ca>
7207 Date: Mon Sep 24 09:05:31 2007 -0600
7209 [BUILD] Generate include/autoconf.mk from board config files
7211 Use cpp and sed to postprocess config.h and import the defined values
7212 into include/autoconf.mk. autoconf.mk is then included by config.mk to
7213 give 'make' access to the board configuration.
7215 Doing this enables conditional compilation at the Makefile level instead
7216 of by wrapping every .c file with #ifdef/#endif wrappers.
7218 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7220 commit 68b88999da87ab88e71e1306192905be3450198e
7221 Author: Jon Loeliger <jdl@freescale.com>
7222 Date: Tue Nov 20 15:02:26 2007 -0600
7224 8610HPCD: Enable the 8610 Display Interface Unit
7226 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7228 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
7229 Author: Jon Loeliger <jdl@freescale.com>
7230 Date: Tue Nov 20 15:00:53 2007 -0600
7232 Move 8610 DIU interface structure definitions to header file.
7234 These two structures are still needed during the
7235 initialization and setup of the DIU hardware.
7236 So move them to the fsl_diu_fb.h file for now.
7239 Noticed-by: York Sun <yorksun@freescale.com>
7240 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7242 commit 080c646dbf474a109c3f85718fb01ce042a38c45
7243 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7244 Date: Tue Nov 20 20:14:18 2007 +0100
7246 drivers/i2c : move i2c drivers to drivers/i2c
7248 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7250 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
7251 Author: Wolfgang Denk <wd@denx.de>
7252 Date: Mon Nov 19 22:20:24 2007 +0100
7254 Prepare for 1.3.0 release.
7256 Signed-off-by: Wolfgang Denk <wd@denx.de>
7258 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
7259 Author: Haiying Wang <Haiying.Wang@freescale.com>
7260 Date: Mon Nov 19 10:02:13 2007 -0500
7262 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
7264 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
7266 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7268 commit f8c320609366176b31104d9bf5e295232e1c7f1d
7269 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7270 Date: Mon Nov 19 11:14:16 2007 +0900
7272 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
7274 lowlevel_init.S: Assembler messages:
7275 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
7277 Looking at codes, the `memtest' and `clearmem' are intentional mixed
7278 use of `global symbols' and `label' for debugging purpose. To make it
7279 build, just disable global-symbols-use for now. As a result `memtest'
7280 still remains as unused, but leave it be...
7282 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7284 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
7285 Author: Wolfgang Denk <wd@denx.de>
7286 Date: Mon Nov 19 12:59:14 2007 +0100
7288 Fix build problems with mp2usb board
7290 Signed-off-by: Wolfgang Denk <wd@denx.de>
7292 commit 6bf4c686afca1e86e1c384d59218f914605713bf
7293 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7294 Date: Sun Nov 18 18:36:11 2007 +0100
7296 s3c24x0: Fix usb_ohci.c missing in Makefile
7297 and usb_ohci.c warning differ in signedness
7299 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7301 commit 6073f61e078da5ddb521b56256bcc36508589883
7302 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7303 Date: Sun Nov 18 12:55:02 2007 +0100
7305 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
7307 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7309 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
7310 Author: Wolfgang Denk <wd@denx.de>
7311 Date: Sun Nov 18 17:11:09 2007 +0100
7313 Fix compiler warnings for ARM systems.
7315 Signed-off-by: Wolfgang Denk <wd@denx.de>
7317 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
7318 Author: Wolfgang Denk <wd@denx.de>
7319 Date: Sun Nov 18 16:36:27 2007 +0100
7321 Fix compiler warnings for PPC systems. Update CHANGELOG.
7323 Signed-off-by: Wolfgang Denk <wd@denx.de>
7325 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
7326 Author: Stefan Roese <sr@denx.de>
7327 Date: Sun Nov 18 14:44:44 2007 +0100
7329 ppc4xx: Correct 405EX PCIe UTL register mapping
7331 Map 4k mem space for UTL registers for each port.
7333 Signed-off-by: Stefan Roese <sr@denx.de>
7335 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
7336 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7337 Date: Sat Nov 17 11:31:10 2007 +0100
7339 Fix warning differ in signedness in net/net.c and net/nfs.c
7341 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
7342 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7343 Date: Sat Nov 17 20:42:45 2007 +0900
7345 gth2.c: Fix a warning on gth2 build.
7347 gth2.c: In function 'misc_init_r':
7348 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
7350 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7352 commit 2309c130aa4c84b91bd874a41269c923eb61b555
7353 Author: Stefan Roese <sr@denx.de>
7354 Date: Sat Nov 17 07:58:25 2007 +0100
7356 Fix warning differ in signedness in common/cmd_scsi.c
7358 Signed-off-by: Stefan Roese <sr@denx.de>
7360 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
7361 Author: Stefan Roese <sr@denx.de>
7362 Date: Sat Nov 17 14:52:29 2007 +0100
7364 ppc4xx: Update AMCC Kilauea config file
7366 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
7368 Signed-off-by: Stefan Roese <sr@denx.de>
7370 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
7371 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7372 Date: Sat Nov 17 20:05:26 2007 +0900
7374 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
7376 Current trick to pick up GNU assembler minor version does not work with the
7377 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
7380 $ sde-as --version |grep "GNU assembler"
7381 GNU assembler 2.15.94 mipssde-6.02.02-20050602
7382 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
7384 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
7388 $ mips-linux-as --version |grep "GNU assembler"
7389 GNU assembler (GNU Binutils) 2.18
7390 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
7392 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
7396 As a result of above, you'll see many noises with such binutils:
7399 /bin/sh: line 0: [: : integer expression expected
7400 /bin/sh: line 0: [: : integer expression expected
7401 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
7402 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
7403 /bin/sh: line 0: [: : integer expression expected
7404 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
7405 /bin/sh: line 0: [: : integer expression expected
7406 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
7407 /bin/sh: line 0: [: : integer expression expected
7409 This patch simplifies the trick and makes it work with both versions of gas.
7410 I also replace an expensive `awk (or gawk)' with `cut'.
7412 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7414 commit 16664f72850846e645616da1c0fa5afcd6d15f15
7415 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7416 Date: Sat Nov 17 20:05:26 2007 +0900
7418 [MIPS] Remove useless instructions for initializing $gp.
7420 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7422 commit 03c031d5660ea946c39af6e2e16267da857c609f
7423 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7424 Date: Sat Oct 27 15:27:06 2007 +0900
7426 [MIPS] MIPS 4K core: Coding style cleanups
7430 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7432 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
7433 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7434 Date: Sat Nov 17 20:05:20 2007 +0900
7436 [MIPS] gth2.c: Fix a warning on gth2 build.
7438 gth2.c: In function 'misc_init_r':
7439 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
7441 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7443 commit 4fbd0741b2b6441da10be93e10267122581b7079
7444 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7445 Date: Sat Oct 27 15:22:33 2007 +0900
7447 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
7449 au1x00_eth.c: In function 'au1x00_miiphy_write':
7450 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
7452 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7454 commit f01320459736f156707425cf8112f98606301aa4
7455 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7456 Date: Sat Oct 27 15:00:25 2007 +0900
7458 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
7460 au1x00_eth.c: In function 'au1x00_enet_initialize':
7461 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
7462 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
7463 au1x00_eth.c:246: error: for each function it appears in.)
7464 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
7465 au1x00_eth.c: In function 'au1x00_miiphy_write':
7466 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
7467 make[1]: *** [au1x00_eth.o] Error 1
7469 Fixed by moving these two functions forward.
7471 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7473 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
7474 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7475 Date: Sat Oct 27 15:00:25 2007 +0900
7477 MAKEALL: Added missing pb1000 board
7479 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7481 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
7482 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7483 Date: Sat Oct 27 15:00:24 2007 +0900
7485 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
7487 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7489 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
7490 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7491 Date: Sat Oct 27 15:00:24 2007 +0900
7493 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
7495 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7497 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
7498 Author: Wolfgang Denk <wd@denx.de>
7499 Date: Sat Nov 17 02:34:38 2007 +0100
7501 Update CHANGELOIG, prepare for -rc4
7503 Signed-off-by: Wolfgang Denk <wd@denx.de>
7505 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
7506 Author: Luotao Fu <l.fu@pengutronix.de>
7507 Date: Wed Nov 14 18:58:33 2007 +0100
7509 Fix the i2c frequency and default address in rsdproto board
7511 rsdproto board support has wrong I2C frequency and wrong return value
7514 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
7516 commit 429c180edad038f91c989cb14b478228092e7054
7517 Author: Wolfgang Denk <wd@denx.de>
7518 Date: Sat Nov 17 01:45:38 2007 +0100
7520 powerpc: Backout relocation changes for MPC5121, too.
7522 Apply Grant Likely's backout to MPC5121 code, too.
7524 Pointed out by Rafal Jaworowski <raj@semihalf.com>
7526 Signed-off-by: Wolfgang Denk <wd@denx.de>
7528 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
7529 Author: Grant Likely <grant.likely@secretlab.ca>
7530 Date: Tue Nov 13 22:18:33 2007 -0700
7532 powerpc: Backout relocation changes.
7534 Ugh. I *hate* to back this change out, but these compiler flags don't
7535 work for relocation on all versions of GCC. I've not been able to
7536 reproduce the environment in my setup (and hence, not been able to
7537 find a combination that *does* work), so I've got no choice but to go
7538 back to the old gcc flags and linker script.
7540 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7542 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
7543 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7544 Date: Tue Nov 13 09:11:05 2007 +0100
7546 Fixed mips_io_port_base build errors.
7548 This patch has been sent on:
7551 Although mips_io_port_base is currently a part of IDE command, it is quite
7552 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
7553 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
7555 This patch is triggered by multiple definition of `mips_io_port_base' build
7556 error on gth2 (and tb0229 also needs this fix.)
7558 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
7559 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
7560 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
7561 make: *** [u-boot] Error 1
7563 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7564 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7566 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
7567 Author: Wolfgang Denk <wd@denx.de>
7568 Date: Sat Nov 17 01:30:40 2007 +0100
7570 Fix a bug in the slave serial programming mode for the Xilinx
7571 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
7572 the most significant bit was set, which did not work on any
7573 architecture where "char" defaulted to be an unsigned type.
7575 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
7577 Signed-off-by: Wolfgang Denk <wd@denx.de>
7579 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
7580 Author: Jon Loeliger <jdl@freescale.com>
7581 Date: Thu Nov 1 12:23:29 2007 -0500
7583 86xx: Fix broken variable reference when #def DEBUGing.
7585 Sometimes you can't reference the DDR2 controller variables.
7587 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7589 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
7590 Author: Jason Jin <Jason.jin@freescale.com>
7591 Date: Fri Oct 26 18:32:00 2007 +0800
7593 make 8610 board use pixis reset
7595 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7597 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
7598 Author: Jason Jin <Jason.jin@freescale.com>
7599 Date: Mon Oct 29 19:26:21 2007 +0800
7601 Unify pixis_reset altbank across board families
7603 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
7604 into the separate board config files.
7606 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7609 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
7610 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7611 Date: Wed Nov 7 08:19:21 2007 +0100
7613 Fix warning: pointer targets in assignment differ in signedness
7615 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7617 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
7618 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7619 Date: Wed Nov 7 08:19:19 2007 +0100
7621 Fix warning differ in signedness in common/cmd_ide.c
7623 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7625 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
7626 Author: Stefan Roese <sr@denx.de>
7627 Date: Fri Nov 16 14:16:54 2007 +0100
7629 ppc4xx: Enable 405EX PCIe UTL register configuration
7631 Till now the UTL registers on 405EX were not initialized but left with
7632 their default values. This patch new initializes some of the UTL
7635 Signed-off-by: Stefan Roese <sr@denx.de>
7637 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
7638 Author: Stefan Roese <sr@denx.de>
7639 Date: Fri Nov 16 14:00:59 2007 +0100
7641 ppc4xx: Update AMCC Makalu for board rev 1.1
7643 This patch adds changes needed for Makalu rev 1.1:
7645 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
7646 - Enable 2nd ethernet port EMAC1
7647 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
7648 - Reset PCIe ports via GPIO upon bootup
7650 Signed-off-by: Stefan Roese <sr@denx.de>
7652 commit 4d4faae65e115e327425cd514c1a35146a85166b
7653 Author: Grant Likely <grant.likely@secretlab.ca>
7654 Date: Mon Sep 24 09:05:31 2007 -0600
7656 Group PCI and PCMCIA drivers in drivers/Makefile
7658 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7660 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
7661 Author: Grant Likely <grant.likely@secretlab.ca>
7662 Date: Mon Sep 24 09:05:31 2007 -0600
7664 Group block/flash drivers in drivers/Makefile
7666 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7668 commit df58c81551700f058b44cacf55a7997fa63bfe0a
7669 Author: Grant Likely <grant.likely@secretlab.ca>
7670 Date: Mon Sep 24 09:05:31 2007 -0600
7672 Group USB drivers in drivers/Makefile
7674 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7676 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
7677 Author: Grant Likely <grant.likely@secretlab.ca>
7678 Date: Mon Sep 24 09:05:30 2007 -0600
7680 Group i2c drivers in drivers/Makefile
7682 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7684 commit ec00c76de0e5971273905998d62d6bb119324218
7685 Author: Grant Likely <grant.likely@secretlab.ca>
7686 Date: Mon Sep 24 09:05:30 2007 -0600
7688 Group console drivers in drivers/Makefile
7690 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7692 commit 754f230aa01b8c789fc31f8013c2487954073300
7693 Author: Grant Likely <grant.likely@secretlab.ca>
7694 Date: Mon Sep 24 09:05:30 2007 -0600
7696 Group network drivers in drivers/Makefile
7698 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7700 commit f0037c56b0d12cd46215124667b9f83d60ef9391
7701 Author: Grant Likely <grant.likely@secretlab.ca>
7702 Date: Mon Sep 24 09:05:30 2007 -0600
7704 Build: split COBJS value into multiple lines
7706 This change is in preparation for condtitionial compile support in the
7707 build system. By spliting them all into seperate lines now, subsequent
7708 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
7709 be less invasive and easier to review
7711 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7713 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
7714 Author: Grant Likely <grant.likely@secretlab.ca>
7715 Date: Mon Sep 24 09:05:30 2007 -0600
7717 Add .gitignore files
7719 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7720 Acked-by: Kim Phillips <kim.phillips@freescale.com>
7722 commit 955413f35f054a82e40042f1dbcf501c6a05719b
7723 Author: Grant Likely <grant.likely@secretlab.ca>
7724 Date: Thu Nov 15 08:27:52 2007 -0700
7726 Revert "Correct relocation fixup for mpc5xx"
7728 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
7729 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7731 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
7732 Author: Grant Likely <grant.likely@secretlab.ca>
7733 Date: Thu Nov 15 08:24:32 2007 -0700
7735 Revert "Correct fixup relocation for MPC5xxx"
7737 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
7738 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7740 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
7741 Author: Grant Likely <grant.likely@secretlab.ca>
7742 Date: Thu Nov 15 08:21:04 2007 -0700
7744 Revert "Correct fixup relocation for mpc8220"
7746 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
7747 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7749 commit 70922342369e5e39b286fe21e768a239ca07a514
7750 Author: Grant Likely <grant.likely@secretlab.ca>
7751 Date: Thu Nov 15 08:20:57 2007 -0700
7753 Revert "Correct fixup relocation for mpc824x"
7755 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
7756 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7758 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
7759 Author: Grant Likely <grant.likely@secretlab.ca>
7760 Date: Thu Nov 15 08:20:50 2007 -0700
7762 Revert "Correct fixup relocation for mpc8260"
7764 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
7765 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7767 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
7768 Author: Grant Likely <grant.likely@secretlab.ca>
7769 Date: Thu Nov 15 08:20:43 2007 -0700
7771 Revert "Correct fixup relocation for mpc83xx"
7773 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
7774 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7776 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
7777 Author: Grant Likely <grant.likely@secretlab.ca>
7778 Date: Thu Nov 15 08:20:25 2007 -0700
7780 Revert "[MPC512x] Correct fixup relocation"
7782 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
7783 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7785 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
7786 Author: Stefan Roese <sr@denx.de>
7787 Date: Thu Nov 15 14:25:09 2007 +0100
7789 ppc4xx: Small AMCC Kilauea cleanup
7791 Remove not needed pci_target_init() function.
7793 Signed-off-by: Stefan Roese <sr@denx.de>
7795 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
7796 Author: Stefan Roese <sr@denx.de>
7797 Date: Thu Nov 15 14:23:55 2007 +0100
7799 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
7801 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
7802 - Cleanup of the 4xx GPIO functions
7803 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
7805 Signed-off-by: Stefan Roese <sr@denx.de>
7807 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
7808 Author: Stefan Roese <sr@denx.de>
7809 Date: Thu Nov 15 14:20:08 2007 +0100
7811 ppc4xx: AMCC Taihu board config file cleanup
7813 This patch makes the AMCC Taihu a little more compatible to the other
7816 Signed-off-by: Stefan Roese <sr@denx.de>
7818 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
7819 Author: Marian Balakowicz <m8@semihalf.com>
7820 Date: Thu Nov 15 13:37:28 2007 +0100
7822 [INKA4x0] NG hardware: flash support
7824 Disabled and remove inka4x0 custom flash driver, use CFI flash
7827 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7829 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
7830 Author: Marian Balakowicz <m8@semihalf.com>
7831 Date: Thu Nov 15 13:29:55 2007 +0100
7833 [INKA4x0] NG hardware: SDRAM support
7835 Add support for three new DDR chips that may be present on a NG
7836 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
7838 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
7840 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7842 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
7843 Author: Marian Balakowicz <m8@semihalf.com>
7844 Date: Thu Nov 15 13:24:43 2007 +0100
7846 [INKA4x0] NG hardware: platform code update
7848 - Cleanup compile warnings.
7849 - Add missing '\0' in default environment.
7850 - Increase CFG_MONITOR_LEN to 256 KiB.
7851 - Add required CFG_USE_PPCENV.
7853 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7855 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
7856 Author: Peter Pearse <peter.pearse@arm.com>
7857 Date: Thu Nov 15 08:58:00 2007 +0000
7859 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
7860 Remove warnings re onenand_read() & write()
7862 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
7863 Author: Peter Pearse <peter.pearse@arm.com>
7864 Date: Thu Nov 15 08:45:13 2007 +0000
7868 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
7869 Author: Roy Zang <tie-fei.zang@freescale.com>
7870 Date: Thu Sep 13 18:52:28 2007 +0800
7872 Enable ULi1575 Ethernet support in 8610HPCD config
7874 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7875 Acked-by: Jon Loeliger <jdl@freescale.com>
7877 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
7878 Author: Stefan Roese <sr@denx.de>
7879 Date: Tue Nov 13 08:18:20 2007 +0100
7881 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
7883 Signed-off-by: Stefan Roese <sr@denx.de>
7885 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
7886 Author: Stefan Roese <sr@denx.de>
7887 Date: Tue Nov 13 08:06:11 2007 +0100
7889 ppc4xx: Fix 405EX PCIe UTLSET register setup
7891 Signed-off-by: Stefan Roese <sr@denx.de>
7893 commit 1ce55151c85d068f70317a8d65c61058b891afb4
7894 Author: Heiko Schocher <hs@denx.de>
7895 Date: Tue Nov 13 07:50:29 2007 +0100
7897 [UC101] SRAM now with 2 MB working.
7899 Signed-off-by: Heiko Schocher <hs@denx.de>
7901 commit 2d14684341109a69616e4d6016cd61402d55086f
7902 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7903 Date: Fri Nov 9 15:37:53 2007 +0100
7905 ppc4xx: Use generic usb-ohci driver for sequoia board
7907 This patch makes the sequoia board use the generic usb-ohci driver
7908 instead of cpu/ppc4xx/usb_ohci.c.
7910 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7911 Signed-off-by: Stefan Roese <sr@denx.de>
7913 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
7914 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7915 Date: Fri Nov 9 15:37:23 2007 +0100
7917 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
7919 This patch disables the 44x d-cache on 'usb start' and
7920 reenables it on 'usb stop'. This should be seen as a
7921 temporary fix until the generic usb-ohci driver can
7922 life with d-cache enabled.
7924 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7925 Signed-off-by: Stefan Roese <sr@denx.de>
7927 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
7928 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7929 Date: Fri Nov 9 15:36:44 2007 +0100
7931 ppc4xx: Remove redundant code from 4xx network driver
7933 This patch removes some redundant code and decrements the end
7934 address of cache flush and invalidate by 1.
7936 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7937 Signed-off-by: Stefan Roese <sr@denx.de>
7939 commit 5ca9881aad8c413ac2a82868a5e3719178254502
7940 Author: Peter Pearse <peter.pearse@arm.com>
7941 Date: Fri Nov 9 15:24:26 2007 +0000
7943 Add apollon board support
7944 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
7946 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
7947 Author: Stefan Roese <sr@denx.de>
7948 Date: Fri Nov 9 12:19:58 2007 +0100
7950 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
7952 Signed-off-by: Stefan Roese <sr@denx.de>
7954 commit c7f69c340277935a6c19a956421852da944a365f
7955 Author: Stefan Roese <sr@denx.de>
7956 Date: Fri Nov 9 12:18:54 2007 +0100
7958 ppc4xx: Make output a little shorter on I2C bootrom detection
7960 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
7961 already print a line with the information which I2C bootrom is
7962 used for bootstrap configuration. So we don't need this extra line
7963 with "I2C boot EEPROM en-/dis-abled".
7965 This patch also has a little code cleanup integrated.
7967 Signed-off-by: Stefan Roese <sr@denx.de>
7969 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
7970 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7971 Date: Thu Nov 8 12:50:18 2007 -0600
7973 ColdFire: MCF5329 - Remove reset registers from CCM
7975 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7977 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
7978 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7979 Date: Thu Nov 8 12:31:11 2007 -0600
7981 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
7983 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7985 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
7986 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7987 Date: Thu Nov 8 12:19:01 2007 -0600
7989 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
7991 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7993 commit 225a24b5e062ad94627424508ae814f51dbe1a34
7994 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7995 Date: Wed Nov 7 18:00:54 2007 -0600
7997 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
7999 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8001 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
8002 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8003 Date: Wed Nov 7 17:56:15 2007 -0600
8005 ColdFire: MCF532x - Update do_reset() using core reset
8007 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8009 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
8010 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8011 Date: Wed Nov 7 17:51:00 2007 -0600
8013 ColdFire: Update cpu flag for 4.2-xx compiler
8015 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8017 commit 070ba56115b4da63b46e974287fa4550d4023386
8018 Author: York Sun <yorksun@freescale.com>
8019 Date: Wed Oct 31 14:59:04 2007 -0500
8021 8610: Add console frame buffer support to FSL 8610 DIU driver.
8023 Add cfb console support to FSL 8610 DIU driver.
8024 Inspect board version from PIXIS to obtain correct pixel format.
8026 Use #define CONFIG_VIDEO in config file to enable fb console.
8028 To switch monitor, set monitor variable to
8029 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
8030 followed by "diufb init".
8032 Preserve logo bitmap at the top of the fb console.
8034 Signed-off-by: York Sun <yorksun@freescale.com>
8035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8037 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
8038 Author: York Sun <yorksun@freescale.com>
8039 Date: Mon Oct 29 13:58:39 2007 -0500
8041 8610: Add 8610 DIU display driver
8043 1280x1024 and 1024x768 @ 32 bpp are supported now.
8044 DVI, Single-link LVDS, Double-link LVDS are all supported.
8046 Environmental variable "monitor" is used to specify monitor port.
8048 A new command "diufb" is introduced to reinitialize monitor
8049 and display a BMP file in the memory. So far, 1-bit, 4-bit,
8050 8-bit and 24-bit BMP formats are supported.
8053 - initialize the diu driver
8054 Enable the port specified in the environmental variable "monitor"
8057 - display bmp file in memory.
8058 The bmp image should be no bigger than the resolution, 1280x1024
8059 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
8061 Note, this driver allocate memory but doesn't free it after use
8062 It is written on purpose -- to avoid a failure of reallocation
8063 due to memory fragement.
8065 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
8067 Signed-off-by: York Sun <yorksun@freescale.com>
8068 Signed-off-by: Jon loeliger <jdl@freescale.com>
8070 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
8071 Author: York Sun <yorksun@freescale.com>
8072 Date: Wed Oct 31 10:43:59 2007 -0500
8074 FSL: Add a freescale bitmap logo.
8076 This Freescale logo is a 340 x 128 x 4bpp BMP file
8077 that can be displayed by the DIU Framebuffer driver.
8079 Signed-off-by: York Sun <yorksun@freescale.com>
8080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8082 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
8083 Author: York Sun <yorksun@freescale.com>
8084 Date: Mon Oct 29 13:57:53 2007 -0500
8086 8610: Make some extra debug environment variables conditional.
8088 One may #define ENV_DEBUG to get them back again.
8090 Signed-off-by: York Sun <yorksun@freescale.com>
8092 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
8093 Author: Jason Jin <Jason.jin@freescale.com>
8094 Date: Mon Oct 29 19:26:21 2007 +0800
8096 8610: Actually enable pixis_reset CONFIGs
8098 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8100 commit f3bceaab230b4748d0afc4109b6837308f018b40
8101 Author: Jason Jin <Jason.jin@freescale.com>
8102 Date: Fri Oct 26 18:31:59 2007 +0800
8104 Fix the BAT definition of PCI IO on 8610 board
8106 The address in the BAT register is aligned with the BAT size.
8107 The original definition actually did not define BAT for PCIE2 IO.
8108 This patch fix this.
8110 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8112 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
8113 Author: Jason Jin <Jason.jin@freescale.com>
8114 Date: Mon Oct 29 19:26:21 2007 +0800
8116 Unify pixis_reset altbank across board families
8118 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
8119 into the separate board config files.
8121 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8122 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8124 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
8125 Author: Jason Jin <Jason.jin@freescale.com>
8126 Date: Fri Oct 26 18:32:00 2007 +0800
8128 make 8610 board use pixis reset
8130 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8132 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
8133 Author: Jon Loeliger <jdl@freescale.com>
8134 Date: Thu Nov 1 12:23:29 2007 -0500
8136 86xx: Fix broken variable reference when #def DEBUGing.
8138 Sometimes you can't reference the DDR2 controller variables.
8140 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8142 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
8143 Author: Roy Zang <tie-fei.zang@freescale.com>
8144 Date: Mon Nov 5 17:39:24 2007 +0800
8146 Implement general ULi 526x Ethernet driver support in U-boot
8148 This patch implements general ULi 526x Ethernet driver.
8149 Until now, it is the only native Ethernet port on
8150 MPC8610HPCD board, but it could be used on other boards
8151 with ULi 526x Ethernet port as well.
8153 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
8154 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8155 Acked-by: Jon Loeliger <jdl@freescale.com>
8156 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8158 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
8159 Author: Larry Johnson <lrj@arlinx.com>
8160 Date: Thu Nov 1 08:46:50 2007 -0500
8162 NET: Add Ethernet 1000BASE-X support for PPC4xx
8164 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
8165 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
8166 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
8167 "mii info" command is modified to distinguish between 1000BASE-T and -X.
8169 Signed-off-by: Larry Johnson <lrj@acm.org>
8170 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8172 commit 298035df4948b113d29ac0e694717d34b95bc5dc
8173 Author: Larry Johnson <lrj@arlinx.com>
8174 Date: Wed Oct 31 11:21:29 2007 -0500
8176 NET: Cosmetic changes
8178 Signed-off-by: Larry Johnson <lrj@acm.org>
8179 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8181 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
8182 Author: Stefan Roese <sr@denx.de>
8183 Date: Mon Nov 5 07:43:05 2007 +0100
8185 ppc4xx: Make output a little shorter on PCIe detection
8187 Now not max 3 lines but 2 lines are printed per PCIe port.
8189 Signed-off-by: Stefan Roese <sr@denx.de>
8191 commit 992742a5b09d9040adbd156fb90756af66ade310
8192 Author: Wolfgang Denk <wd@denx.de>
8193 Date: Sat Nov 3 23:09:27 2007 +0100
8195 Cleanup coding style; update CHANGELOG
8197 Signed-off-by: Wolfgang Denk <wd@denx.de>
8199 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
8200 Author: Bruce Adler <bruce.adler@ccpu.com>
8201 Date: Fri Nov 2 13:15:42 2007 -0700
8203 fix wording in README
8205 Changed the wording to properly describe the shadowing
8206 of the environment from ROM to RAM
8208 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
8210 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
8211 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8212 Date: Wed Oct 31 02:18:15 2007 +0900
8214 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
8216 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8218 commit ec22755799466c8a103664bb3a5e647bf9c238f4
8219 Author: Vlad Lungu <vlad@comsys.ro>
8220 Date: Thu Oct 25 16:08:14 2007 +0300
8222 Trimmed some variables in ne2000.c
8224 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
8226 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
8227 Author: Zhang Wei <wei.zhang@freescale.com>
8228 Date: Thu Oct 25 17:51:27 2007 +0800
8230 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
8232 The scan code of the key 'z' is 0x1d, which should be handled.
8234 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
8237 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8239 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
8240 Author: Zhang Wei <wei.zhang@freescale.com>
8241 Date: Thu Oct 25 17:30:04 2007 +0800
8243 Fix USB support issue for MPC8641HPCN board.
8245 The configuration file has already enabled USB, but it
8246 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
8247 on MPC8641HPCN can not work because of the wrong USB
8250 And add the USB command to U-Boot commands list.
8252 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
8254 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
8255 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8256 Date: Wed Oct 24 18:16:01 2007 +0200
8258 Use config_cmd_default.h instead of config_cmd_all.h
8260 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8262 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
8263 Author: Marian Balakowicz <m8@semihalf.com>
8264 Date: Wed Oct 24 01:37:36 2007 +0200
8266 TQM5200: Call usb_cpu_init() during board init
8268 usb_cpu_init() configures GPS USB pins, clocks, etc. and
8269 is required for proper operation of kernel USB subsystem.
8270 This setup was previously done in the kernel by the fixup
8271 code which is being removed, thus low level init must be
8274 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
8276 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
8277 Author: Guennadi Liakhovetski <lg@denx.de>
8278 Date: Tue Oct 23 16:25:50 2007 +0200
8282 An obvious typo. Originally fixed in linkstation u-boot port.
8284 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8286 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
8287 Author: Guennadi Liakhovetski <lg@denx.de>
8288 Date: Tue Oct 23 14:35:05 2007 +0200
8290 Fix a typo in cpu/mpc824x/interrupts.c
8292 Since December 2003 the timer_interrupt_cpu() function in
8293 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
8294 parameter. Remove it.
8296 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8298 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
8299 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
8300 Date: Wed Oct 17 11:13:51 2007 +0200
8302 add ft_cpu_setup(..) on mpc8260
8304 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
8305 based on code from mpc5xxx
8307 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
8310 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
8311 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
8312 Date: Wed Oct 17 11:18:42 2007 +0200
8314 changes for IDS8247 board support
8316 To get the IDS8247 board working following are done:
8317 - FCC2 is deactivated
8320 - CFI driver is activated
8321 - Adapted for use with LIBFDT
8323 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
8326 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
8327 Author: Stefan Roese <sr@denx.de>
8328 Date: Sat Nov 3 12:08:28 2007 +0100
8330 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
8332 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
8333 Again, only one image supports both targets.
8335 Signed-off-by: Stefan Roese <sr@denx.de>
8337 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
8338 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8339 Date: Wed Oct 24 15:48:37 2007 +0200
8341 ATSTK1002: Remove default ethernet addresses
8343 Wolfgang is right: It's not a good idea to set up default initial
8344 ethernet addresses for a board, even though they belong to the local
8347 This will change the failure mode from "IT manager screams at you for
8348 using duplicate ethernet addresses" to a nice error message explaining
8349 that the ethernet address hasn't been set properly.
8351 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8353 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
8354 Author: Justin Flammia <jflammia@savantav.com>
8355 Date: Mon Oct 29 17:40:35 2007 -0400
8359 This is a multi-part message in MIME format.
8361 commit e6e505eae94ed721e123e177489291fc4544b7b8
8362 Author: Justin Flammia <jflammia@savantav.com>
8363 Date: Mon Oct 29 17:19:03 2007 -0400
8365 Found a bug in the way the DHCP Request packet is built, where the IP address
8366 that is offered by the server is bound to prematurely. This patch is a fix of
8367 that bug where the IP address offered by the DHCP server is not used until
8368 after the DHCP ACK from the server is received.
8370 Signed-off-by: Justin Flammia <jflammia@savantav.com>
8371 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8373 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
8374 Author: Stefan Roese <sr@denx.de>
8375 Date: Wed Oct 31 20:58:34 2007 +0100
8377 ppc4xx: Fix acadia_nand build problem
8379 Since the cache handling functions were moved from start.S into cache.S
8380 the acadia NAND booting Makfile needs to be adapted accordingly.
8382 Signed-off-by: Stefan Roese <sr@denx.de>
8384 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
8385 Author: Stefan Roese <sr@denx.de>
8386 Date: Wed Oct 31 20:57:11 2007 +0100
8388 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
8390 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
8391 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
8392 boards by defining CONFIG_4xx_DCACHE in the board config file. This
8393 option will disappear, when more boards use is successfully and no
8394 more known problems exist.
8396 This is tested successfully on Sequoia and Katmai. The only problem that
8397 needs to be fixed is, that USB is not working on Sequoia right now, since
8398 it will need some cache handling code too, similar to the 4xx EMAC driver.
8400 Signed-off-by: Stefan Roese <sr@denx.de>
8402 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
8403 Author: Stefan Roese <sr@denx.de>
8404 Date: Wed Oct 31 20:51:10 2007 +0100
8406 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
8408 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
8409 disable the cache for the CPU POST tests, since these tests consist
8410 of self modifying code. This is done via the new change_tlb() function.
8412 Signed-off-by: Stefan Roese <sr@denx.de>
8414 commit f71b2888b4b3c870909a0341427b2a914246f81f
8415 Author: Stefan Roese <sr@denx.de>
8416 Date: Wed Oct 31 20:47:26 2007 +0100
8418 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
8420 This patch enables the 4xx EMAC POST driver to work too, when dcache is
8423 Signed-off-by: Stefan Roese <sr@denx.de>
8425 commit a2685904061b35a17583d65fe47cdc2686a69eaa
8426 Author: Stefan Roese <sr@denx.de>
8427 Date: Wed Oct 31 20:45:53 2007 +0100
8429 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
8431 Signed-off-by: Stefan Roese <sr@denx.de>
8433 commit ff768cb168d8157c24a25016dbfbeb465e47f420
8434 Author: Stefan Roese <sr@denx.de>
8435 Date: Wed Oct 31 18:01:24 2007 +0100
8437 ppc4xx: Change 4xx ethernet driver to handle cached memory too
8439 This patch enables the 4xx EMAC driver to work too, when dcache is
8442 Signed-off-by: Stefan Roese <sr@denx.de>
8444 commit 483e09a223c666269ef81d3573a6591b1046b0ef
8445 Author: Stefan Roese <sr@denx.de>
8446 Date: Wed Oct 31 17:59:22 2007 +0100
8448 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
8450 This function is used to either turn cache on or off in a specific
8453 Signed-off-by: Stefan Roese <sr@denx.de>
8455 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
8456 Author: Stefan Roese <sr@denx.de>
8457 Date: Wed Oct 31 17:57:52 2007 +0100
8459 ppc4xx: Remove cache definition from 4xx board config files
8461 All 4xx board config files don't need the cache definitions anymore.
8462 These are now defined in common headers.
8464 Signed-off-by: Stefan Roese <sr@denx.de>
8466 commit 9b94ac61d2176185c30adf0793e079ec30e68687
8467 Author: Stefan Roese <sr@denx.de>
8468 Date: Wed Oct 31 17:55:58 2007 +0100
8470 ppc4xx: Rework 4xx cache support
8472 New cache handling functions added and all existing functions
8473 moved from start.S into seperate cache.S.
8475 Signed-off-by: Stefan Roese <sr@denx.de>
8477 commit 06713773da4ac3d390c63d82641eb553224b27c2
8478 Author: Stefan Roese <sr@denx.de>
8479 Date: Tue Oct 23 18:03:12 2007 +0200
8481 ppc4xx: Remove compiler warning from previous commit
8483 Signed-off-by: Stefan Roese <sr@denx.de>
8485 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
8486 Author: Stefan Roese <sr@denx.de>
8487 Date: Tue Oct 23 14:40:30 2007 +0200
8489 ppc4xx: Remove temporary TLB entry in POST cache test
8491 Signed-off-by: Stefan Roese <sr@denx.de>
8493 commit 1338e6a81834099ba19733b69aafd8ef5f098094
8494 Author: Stefan Roese <sr@denx.de>
8495 Date: Tue Oct 23 14:05:08 2007 +0200
8497 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
8499 I lately noticed, that newer 4xx board with GBit support sometimes don't
8500 finish link autonegotiation in 4 seconds. Changing this timeout to 5
8501 seconds seems fine here.
8503 Signed-off-by: Stefan Roese <sr@denx.de>
8505 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
8506 Author: Stefan Roese <sr@denx.de>
8507 Date: Tue Oct 23 14:03:17 2007 +0200
8509 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
8511 This patch changes all in32/out32 calls to use the recommended in_be32/
8512 out_be32 macros instead.
8514 Signed-off-by: Stefan Roese <sr@denx.de>
8516 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
8517 Author: Stefan Roese <sr@denx.de>
8518 Date: Thu Oct 25 12:24:59 2007 +0200
8520 ppc4xx: Fix POST ethernet test for Haleakala
8522 The POST ethernet test needed to be changed to dynamically determine
8523 the count of ethernet devices. This code is cloned from the 4xx
8526 Signed-off-by: Stefan Roese <sr@denx.de>
8528 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
8529 Author: Stefan Roese <sr@denx.de>
8530 Date: Tue Oct 23 11:31:05 2007 +0200
8532 ppc4xx: Correct UART input clock calculation and passing to fdt
8534 We now use a value in the gd (global data) structure for the UART input
8535 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
8538 Signed-off-by: Stefan Roese <sr@denx.de>
8540 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
8541 Author: Stefan Roese <sr@denx.de>
8542 Date: Tue Oct 23 10:10:08 2007 +0200
8544 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
8546 The Haleakala is nearly identical with the Kilauea eval board. The only
8547 difference is that the 405EXr only supports one EMAC and one PCIe
8548 interface. This patch adds support for the Haleakala board by using
8549 the identical image for Kilauea and Haleakala. The distinction is done
8550 by comparing the PVR.
8552 Signed-off-by: Stefan Roese <sr@denx.de>
8554 commit 9f798766aa85e62eb8fa8c721e148df609b78137
8555 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
8556 Date: Tue Oct 23 08:29:10 2007 +0200
8558 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
8560 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
8563 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
8564 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
8565 modules are still plugged in. So it is recommended to remove the DIMM
8566 modules while using the NAND booting code with the fixed SDRAM setup!
8568 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
8569 Signed-off-by: Stefan Roese <sr@denx.de>
8571 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
8572 Author: Stefan Roese <sr@denx.de>
8573 Date: Mon Oct 22 16:24:44 2007 +0200
8575 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
8577 Signed-off-by: Stefan Roese <sr@denx.de>
8579 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
8580 Author: Stefan Roese <sr@denx.de>
8581 Date: Mon Oct 22 16:22:40 2007 +0200
8583 ppc4xx: Rework of 4xx serial driver (4)
8587 - Use in_8/out_8 macros instead of in8/out8
8588 - No need for UART_BASE marco anymore, now really handled via function
8590 - serial_init_common() introduced
8591 - Further coding style cleanup
8593 Signed-off-by: Stefan Roese <sr@denx.de>
8595 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
8596 Author: Stefan Roese <sr@denx.de>
8597 Date: Mon Oct 22 15:45:49 2007 +0200
8599 ppc4xx: Rework of 4xx serial driver (3)
8601 Change all linker scripts to reference the changed driver name iop480_uart.o.
8603 Signed-off-by: Stefan Roese <sr@denx.de>
8605 commit 882ae41274921f9016131806bdeb27e19606f47a
8606 Author: Stefan Roese <sr@denx.de>
8607 Date: Mon Oct 22 15:44:39 2007 +0200
8609 ppc4xx: Rework of 4xx serial driver (2)
8611 Change all linker scripts to reference the changed driver name 4xx_uart.o.
8613 Note: In most cased all these explicit referencing of these object files
8614 in the linker scripts is not neccessary. Only for manually embedded
8615 environment into the U-Boot image, which is not done is most cases.
8617 Signed-off-by: Stefan Roese <sr@denx.de>
8619 commit ad31e40bed042cb670d0036fea96435007afb838
8620 Author: Stefan Roese <sr@denx.de>
8621 Date: Mon Oct 22 15:09:59 2007 +0200
8623 ppc4xx: Rework of 4xx serial driver (1)
8625 This patch starts the rework of the PPC4xx serial driver. First we split
8626 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
8627 handling code and the other one iop480_uart.c with the UART code for the
8628 PLX-Tech IOP480 PPC (PPC403 based).
8630 Signed-off-by: Stefan Roese <sr@denx.de>
8632 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
8633 Author: Stefan Roese <sr@denx.de>
8634 Date: Mon Oct 22 10:30:38 2007 +0200
8636 ppc4xx: Correct UART input clock calculation and passing to fdt
8638 Signed-off-by: Stefan Roese <sr@denx.de>
8640 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
8641 Author: Stefan Roese <sr@denx.de>
8642 Date: Mon Oct 22 07:34:34 2007 +0200
8644 ppc4xx: Add initial AMCC Makalu 405EX support
8646 Signed-off-by: Stefan Roese <sr@denx.de>
8648 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
8649 Author: Stefan Roese <sr@denx.de>
8650 Date: Mon Oct 22 07:33:52 2007 +0200
8652 ppc4xx: Add freqUART to CPU speed detection
8654 This value is needed later for the device tree configuration of
8657 Signed-off-by: Stefan Roese <sr@denx.de>
8659 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
8660 Author: Stefan Roese <sr@denx.de>
8661 Date: Sun Oct 21 14:26:29 2007 +0200
8663 ppc: Small Kilauea cleanup of config file
8665 Signed-off-by: Stefan Roese <sr@denx.de>
8667 commit 758c037aeead34b49631b8da3a90b1bba14c0410
8668 Author: Stefan Roese <sr@denx.de>
8669 Date: Sun Oct 21 08:16:12 2007 +0200
8671 rtc: Add Xicor/Intersil X1205 RTC support
8673 This patch adds support for the Xicor/Intersil X1205 RTC used on the
8674 AMCC Makalu eval board. This driver is basically cloned from the Linux
8675 driver version (2.6.23).
8677 This patch also introduces the Linux bcd.h header for the BCD2BIN/
8678 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
8679 should be converted to also use this header instead of implementing
8680 their own local copy of these functions/macros.
8682 Signed-off-by: Stefan Roese <sr@denx.de>
8684 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
8685 Author: Stefan Roese <sr@denx.de>
8686 Date: Sun Oct 21 08:12:41 2007 +0200
8688 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
8690 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
8691 PPC440_SYS_INFO structure into the common ppc4xx.h header.
8693 Lot's of other macros are good candidates to be consolidated this way
8696 Signed-off-by: Stefan Roese <sr@denx.de>
8698 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
8699 Author: Stefan Roese <sr@denx.de>
8700 Date: Sun Oct 21 08:05:18 2007 +0200
8702 ppc4xx: Fix size setup in Kilauea DDR2 init routine
8704 The size was initilized wrong. Instead of 256MB, the DDR2 controller
8705 was setup to 512MB. Now the correct values is used.
8707 This patch also does a little cleanup and adds a comment here.
8709 Signed-off-by: Stefan Roese <sr@denx.de>
8711 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
8712 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
8713 Date: Thu Oct 18 17:29:04 2007 +0200
8715 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
8717 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
8718 number is used to access system registers.
8720 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
8721 Signed-off-by: Stefan Roese <sr@denx.de>
8723 commit c36c68160333ac5fe41ec3db12a728b7075b3912
8724 Author: Stefan Roese <sr@denx.de>
8725 Date: Thu Oct 18 07:42:27 2007 +0200
8727 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
8729 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
8730 is the internal SRAM. Since I now ported and tested this endpoint mode
8731 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
8734 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
8737 Signed-off-by: Stefan Roese <sr@denx.de>
8739 commit 5cb4af4791f61843432155142b6cfac901f66c10
8740 Author: Stefan Roese <sr@denx.de>
8741 Date: Thu Oct 18 07:39:38 2007 +0200
8743 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
8745 This patch adds endpoint support for the AMCC Kilauea eval board. It can
8746 be tested by connecting a reworked PCIe cable (only 1x lane singles
8747 connected) to another root-complex.
8749 In this test setup, a 64MB inbound window is configured at BAR0 which maps
8750 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
8751 access the first 64MB of the SDRAM on the PPC side.
8753 Signed-off-by: Stefan Roese <sr@denx.de>
8755 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
8756 Author: Stefan Roese <sr@denx.de>
8757 Date: Sat Oct 13 16:43:23 2007 +0200
8759 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
8761 This patch adds support for dynamic configuration of PCIe ports for the
8762 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
8763 boards Yucca & Katmai and the 405EX board Kilauea.
8765 This dynamic configuration is done via the "pcie_mode" environement
8766 variable. This variable can be set to "EP" or "RP" for endpoint or
8767 rootpoint mode. Multiple values can be joined via the ":" delimiter.
8772 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
8775 Per default Yucca will be configured as:
8778 Per default Katmai will be configured as:
8781 Per default Kilauea will be configured as:
8784 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
8785 Signed-off-by: Stefan Roese <sr@denx.de>
8787 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
8788 Author: Stefan Roese <sr@denx.de>
8789 Date: Thu Oct 11 11:15:59 2007 +0200
8791 ppc4xx: Enable device tree support (fdt) on Kilauea per default
8793 This patch enables the fdt support on the AMCC Kilauea eval board.
8794 Additionally now EBC ranges fdt fixup is included to support NOR
8795 FLASH mapping via the Linux physmap_of driver.
8797 This Kilauea port now support booting arch/ppc and arch/powerpc
8798 Linux kernels. The default environment "net_nfs" is for arch/ppc
8799 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
8800 support will be removed.
8802 Signed-off-by: Stefan Roese <sr@denx.de>
8804 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
8805 Author: Stefan Roese <sr@denx.de>
8806 Date: Thu Oct 11 11:11:45 2007 +0200
8808 ppc4xx: Add additional debug info to 4xx fdt support
8810 Signed-off-by: Stefan Roese <sr@denx.de>
8812 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
8813 Author: Stefan Roese <sr@denx.de>
8814 Date: Fri Oct 5 21:28:58 2007 +0200
8816 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
8818 Signed-off-by: Stefan Roese <sr@denx.de>
8820 commit 1941cce71b1ae975602854045061e82f94ecd012
8821 Author: Stefan Roese <sr@denx.de>
8822 Date: Fri Oct 5 17:35:10 2007 +0200
8824 ppc4xx: Fix small merge problem in 4xx_enet.c
8826 Signed-off-by: Stefan Roese <sr@denx.de>
8828 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
8829 Author: Stefan Roese <sr@denx.de>
8830 Date: Fri Oct 5 17:11:30 2007 +0200
8832 ppc4xx: Add initial AMCC Kilauea 405EX support
8834 Signed-off-by: Stefan Roese <sr@denx.de>
8836 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
8837 Author: Stefan Roese <sr@denx.de>
8838 Date: Fri Oct 5 17:10:59 2007 +0200
8840 ppc4xx: Add PPC405EX support
8842 Signed-off-by: Stefan Roese <sr@denx.de>
8844 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
8845 Author: Stefan Roese <sr@denx.de>
8846 Date: Fri Oct 5 17:09:36 2007 +0200
8848 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
8850 Signed-off-by: Stefan Roese <sr@denx.de>
8852 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
8853 Author: Stefan Roese <sr@denx.de>
8854 Date: Fri Oct 5 17:07:50 2007 +0200
8856 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
8858 Signed-off-by: Stefan Roese <sr@denx.de>
8860 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
8861 Author: Stefan Roese <sr@denx.de>
8862 Date: Fri Oct 5 17:04:57 2007 +0200
8864 POST: Add 405EX support to 4xx UART POST test
8866 Signed-off-by: Stefan Roese <sr@denx.de>
8868 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
8869 Author: Stefan Roese <sr@denx.de>
8870 Date: Fri Oct 5 15:10:02 2007 +0200
8872 DTT: Prepare DS1775 driver for use of different I2C addresses
8874 Signed-off-by: Stefan Roese <sr@denx.de>
8876 commit 19e93b1e16d267220440d827b920fbad8abfa70f
8877 Author: Stefan Roese <sr@denx.de>
8878 Date: Fri Oct 5 14:23:43 2007 +0200
8880 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
8882 Signed-off-by: Stefan Roese <sr@denx.de>
8884 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
8885 Author: Stefan Roese <sr@denx.de>
8886 Date: Fri Oct 5 09:22:33 2007 +0200
8888 ppc4xx: 4xx_pcie: Disable debug output as default
8890 Signed-off-by: Stefan Roese <sr@denx.de>
8892 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
8893 Author: Stefan Roese <sr@denx.de>
8894 Date: Fri Oct 5 09:18:23 2007 +0200
8896 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
8898 Signed-off-by: Stefan Roese <sr@denx.de>
8900 commit 4dbee8a90df613eb517aadbecebd70f168913d30
8901 Author: Stefan Roese <sr@denx.de>
8902 Date: Fri Oct 5 07:57:20 2007 +0200
8904 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
8906 128MB seems to be the smallest possible value for the memory size
8907 for on PCIe port. With this change now the BAR's of the PCIe cards
8908 are accessible under U-Boot.
8910 One big note: This only works for PCIe port 0 & 1. For port 2 this
8911 currently doesn't work, since the base address is now 0xc0000000
8912 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
8913 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
8914 to change the base addresses completely and this change would have
8915 too much impact right now.
8917 This patch adds debug output to the 4xx pcie driver too.
8919 Signed-off-by: Stefan Roese <sr@denx.de>
8921 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
8922 Author: Stefan Roese <sr@denx.de>
8923 Date: Wed Oct 3 21:16:32 2007 +0200
8925 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
8927 Signed-off-by: Stefan Roese <sr@denx.de>
8929 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
8930 Author: Stefan Roese <sr@denx.de>
8931 Date: Wed Oct 3 15:01:02 2007 +0200
8933 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
8935 These files were introduced with the IBM 405GP but are currently used on all
8936 4xx PPC platforms. So the name doesn't match the content anymore. This patch
8937 renames the files to 4xx_pci.c/h.
8939 Signed-off-by: Stefan Roese <sr@denx.de>
8941 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
8942 Author: Stefan Roese <sr@denx.de>
8943 Date: Wed Oct 3 14:14:58 2007 +0200
8945 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
8947 Signed-off-by: Stefan Roese <sr@denx.de>
8949 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
8950 Author: Stefan Roese <sr@denx.de>
8951 Date: Wed Oct 3 10:38:09 2007 +0200
8953 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
8955 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
8956 the SDR registers of the PCIe ports. This makes the overall design
8957 clearer, since it removed a lot of switch statements which are not
8960 Also, the functions ppc4xx_init_pcie_rootport() and
8961 ppc4xx_init_pcie_entport() are merged into a single function
8962 ppc4xx_init_pcie_port(), since most of the code was duplicated.
8963 This makes maintainance and porting to other 4xx platforms
8966 Signed-off-by: Stefan Roese <sr@denx.de>
8968 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
8969 Author: Stefan Roese <sr@denx.de>
8970 Date: Wed Oct 3 07:48:09 2007 +0200
8972 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
8974 This patch is the first patch of a series to make the 440SPe PCIe code
8975 usable on different 4xx PPC platforms. In preperation for the new 405EX
8976 which is also equipped with PCIe interfaces.
8978 (2) This patch renames the functions from 440spe_ to 4xx_ with a
8979 little additional cleanup
8981 Signed-off-by: Stefan Roese <sr@denx.de>
8983 commit c7c6da23028f146d912514b95aefa3da7cf37699
8984 Author: Stefan Roese <sr@denx.de>
8985 Date: Wed Oct 3 07:34:10 2007 +0200
8987 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
8989 This patch is the first patch of a series to make the 440SPe PCIe code
8990 usable on different 4xx PPC platforms. In preperation for the new 405EX
8991 which is also equipped with PCIe interfaces.
8993 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
8995 Signed-off-by: Stefan Roese <sr@denx.de>
8997 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
8998 Author: Marian Balakowicz <m8@semihalf.com>
8999 Date: Wed Oct 24 01:37:36 2007 +0200
9001 TQM5200: Call usb_cpu_init() during board init
9003 usb_cpu_init() configures GPS USB pins, clocks, etc. and
9004 is required for proper operation of kernel USB subsystem.
9005 This setup was previously done in the kernel by the fixup
9006 code which is being removed, thus low level init must be
9009 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9010 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9012 commit b5af773f8d92677e06f3295b45557c9d0a487c24
9013 Author: Zhang Wei <wei.zhang@freescale.com>
9014 Date: Thu Oct 25 17:51:27 2007 +0800
9016 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
9018 The scan code of the key 'z' is 0x1d, which should be handled.
9020 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
9023 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9024 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9026 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
9027 Author: Rodolfo Giometti <giometti@enneenne.com>
9028 Date: Mon Oct 15 11:59:17 2007 +0200
9030 PXA USB OHCI: "usb stop" implementation.
9032 Some USB keys need to be switched off before loading the kernel
9033 otherwise they can remain in an undefined status which prevents them
9034 to be correctly recognized by the kernel.
9036 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
9037 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9039 commit 31548249decf18a6b877a18436b6139dd483fe4a
9040 Author: Justin Flammia <jflammia@savantav.com>
9041 Date: Mon Oct 29 17:40:35 2007 -0400
9045 This is a multi-part message in MIME format.
9047 commit e6e505eae94ed721e123e177489291fc4544b7b8
9048 Author: Justin Flammia <jflammia@savantav.com>
9049 Date: Mon Oct 29 17:19:03 2007 -0400
9051 Found a bug in the way the DHCP Request packet is built, where the IP address
9052 that is offered by the server is bound to prematurely. This patch is a fix of
9053 that bug where the IP address offered by the DHCP server is not used until
9054 after the DHCP ACK from the server is received.
9056 Signed-off-by: Justin Flammia <jflammia@savantav.com>
9057 Signed-off-by: Ben Warren <bwarren@qstreams.com>
9059 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
9060 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9061 Date: Thu Oct 25 17:16:22 2007 -0500
9063 ColdFire 54455: Fix correct boot location for atmel and intel
9065 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9067 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
9068 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9069 Date: Thu Oct 25 17:14:00 2007 -0500
9071 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
9073 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9075 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
9076 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9077 Date: Thu Oct 25 17:12:36 2007 -0500
9079 ColdFire 5329: Assign correct SDRAM size and fix cache
9081 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9083 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
9084 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9085 Date: Thu Oct 25 17:10:23 2007 -0500
9087 ColdFire 5253: Assign correct SDRAM size
9089 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9091 commit 2acefa72ee0026f862ab65597ca687428f63a973
9092 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9093 Date: Thu Oct 25 17:09:17 2007 -0500
9095 ColdFire 5282: Fix external flash boot and return dramsize
9097 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9099 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
9100 Author: Bartlomiej Sieka <tur@semihalf.com>
9101 Date: Thu Oct 25 17:20:01 2007 +0200
9103 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
9105 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9107 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
9108 Author: Martin Krause <martin.krause@tqs.de>
9109 Date: Wed Oct 24 08:42:25 2007 +0200
9111 TQM5200: fix spurious characters on second serial interface
9113 With this patch PSC3 is configured as UART. This is done, because if
9114 the pins of PSC3 are not configured at all (-> all pins are GPI),
9115 due to crosstalk, spurious characters may be send over the RX232_2_TXD
9118 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9119 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9121 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
9122 Author: Martin Krause <martin.krause@tqs.de>
9123 Date: Wed Oct 24 08:41:27 2007 +0200
9125 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
9127 Some commands for the STK52xx base board try to access the SM501 grafic
9128 controller. But the TQM5200S has no grafic controller (only the TQM5200
9129 and the TQM5200B have). This patch deactivates the commands accessing
9130 the SM501 for the TQM5200S.
9132 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9133 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9135 commit b31f64343ead9482cd439b1adbe4c34026a641b1
9136 Author: Martin Krause <martin.krause@tqs.de>
9137 Date: Mon Oct 22 16:45:53 2007 +0200
9139 TQM5200: fix spurious characters on second serial interface
9141 With this patch PSC3 is configured as UART. This is done, because if
9142 the pins of PSC3 are not configured at all (-> all pins are GPI),
9143 due to crosstalk, spurious characters may be send over the RX232_2_TXD
9146 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9148 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
9149 Author: Martin Krause <martin.krause@tqs.de>
9150 Date: Mon Oct 22 16:40:06 2007 +0200
9152 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
9154 Some commands for the STK52xx base board try to access the SM501 grafic
9155 controller. But the TQM5200S has no grafic controller (only the TQM5200
9156 and the TQM5200B have). This patch deactivates the commands accessing
9157 the SM501 for the TQM5200S.
9159 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9161 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
9162 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9163 Date: Sun Oct 21 09:14:28 2007 +0200
9165 Mips: Fix string functions differ prototype declaration
9167 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9169 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
9170 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9171 Date: Fri Oct 19 17:51:40 2007 -0500
9173 fsl_pci_init enable COMMAND_MEMORY if inbound window
9175 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
9176 to pciauto_setup_device has the side effect of not getting
9179 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9181 commit e9d0d527992566ebef9826962ff1745b2f082b92
9182 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9183 Date: Fri Oct 19 10:55:24 2007 +0200
9185 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
9187 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9189 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
9190 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9191 Date: Fri Oct 19 08:10:15 2007 +0200
9193 fix warning: no return statement in function returning non-void
9195 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9197 commit e78220f6e514206757acfe247297fc9a328a881f
9198 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9199 Date: Fri Oct 19 06:33:45 2007 +0200
9201 xsengine: Fix no partition type specified, use DOS as default
9203 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9205 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
9206 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9207 Date: Fri Oct 19 00:24:59 2007 +0200
9209 lubbock: Fix no partition type specified, use DOS as default
9211 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9213 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
9214 Author: Wolfgang Denk <wd@denx.de>
9215 Date: Tue Oct 23 16:50:03 2007 +0200
9217 Coding style: keep lists sorted; update CHANGELOG
9219 Signed-off-by: Wolfgang Denk <wd@denx.de>
9221 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
9222 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9223 Date: Fri Oct 19 00:09:05 2007 +0200
9225 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
9227 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9229 commit 96455bfebc9887837095c9051d216f53c61b5f10
9230 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9231 Date: Fri Oct 19 00:07:39 2007 +0200
9233 Fix warning differ in signedness in board/innokom/innokom.c
9235 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9237 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
9238 Author: Marcel Ziswiler <marcel@ziswiler.com>
9239 Date: Fri Oct 19 00:25:33 2007 +0200
9241 fix pxa255_idp board
9243 The pxa255_idp being an old unmaintained board showed several issues:
9244 1. CONFIG_INIT_CRITICAL was still defined.
9245 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
9246 3. Symbol flash_addr was undeclared.
9247 4. The boards lowlevel_init function was still called memsetup.
9248 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
9249 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
9250 'target CPU does not support interworking' warnings on recent compilers.
9251 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
9252 indexes rather than the register definitions from the pxa-regs header
9253 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
9254 avoid any ambiguities.
9255 8. There were several redefinition warnings concerning ICMR, OSMR3,
9256 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
9257 9. The board configuration file was rather outdated.
9258 10. The part header file defined the vendor, product and revision arrays
9259 as unsigned chars instead of just chars in the block_dev_desc_t
9262 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
9264 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
9265 Author: Rune Torgersen <runet@innovsys.com>
9266 Date: Wed Oct 17 11:56:31 2007 -0500
9268 Make MPC8266ADS command selection more robust
9270 Fix MPC8266 command line definition so it won't break when new commands
9271 are added to u-boot.
9272 Signed-off-by Rune Torgersen <runet@innovsys.com>
9274 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
9275 Author: Bartlomiej Sieka <tur@semihalf.com>
9276 Date: Tue Oct 23 13:14:10 2007 +0200
9278 Motion-PRO: Update configuration to accomodate next generation board.
9280 New board has faster oscillator and a different Flash chip. This affects:
9283 - Flash CS configuration (timings)
9284 - Flash sector size, and thus MTD partition layout
9285 - malloc() arena size (due to bigger Flash sectors)
9286 - smaller memory test range (due to bigger malloc() arena)
9288 This patch also enables more extensive memory testing via "mtest".
9290 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9292 commit eff501904df2bf1724a750062628ba2c51dbb1f8
9293 Author: Bartlomiej Sieka <tur@semihalf.com>
9294 Date: Tue Oct 23 11:36:07 2007 +0200
9296 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
9298 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
9299 register must be written a value of 0x00000004 as the first step of the
9300 SDRAM contorller configuration.
9302 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9304 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
9305 Author: Peter Pearse <peter.pearse@arm.com>
9306 Date: Tue Oct 23 10:22:16 2007 +0100
9308 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
9310 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
9311 Author: Stefan Roese <sr@denx.de>
9312 Date: Tue Oct 23 10:17:42 2007 +0200
9314 ppc4xx: lwmon5: Some further GPIO config changes
9316 Signed-off-by: Stefan Roese <sr@denx.de>
9318 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
9319 Author: Vlad Lungu <vlad@comsys.ro>
9320 Date: Sun Oct 21 22:10:10 2007 +0900
9322 [MIPS] Fix UNCACHED_SDRAM
9324 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
9326 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
9327 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9329 commit 00101dd7a32d12f698150123e47e4b3420279f86
9330 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9331 Date: Sun Oct 21 21:30:42 2007 +0900
9333 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
9335 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9337 commit eb700636db017d310edaeb559b13d82588560674
9338 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9339 Date: Sun Oct 21 10:55:37 2007 +0900
9341 [MIPS] u-boot.lds: Define _gp in a standard manner
9343 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9345 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
9346 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9347 Date: Sun Oct 21 10:55:36 2007 +0900
9349 [MIPS] Fix $gp usage
9351 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
9352 As a general principle, we should use _gp for $gp.
9354 Thanks to linker script's help we fortunately have _gp which equals to
9355 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
9356 be able to access to GOT entires, global variables and procedure entry
9357 points. The right thing to do is to use _gp.
9359 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
9360 which holds the offset from _gp. When updating GOT entries, we use this
9361 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
9363 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
9364 I made some change to leave over num_got_entries.
9366 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9367 Cc: Vlad Lungu <vlad@comsys.ro>
9369 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
9370 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9371 Date: Sun Oct 21 10:55:36 2007 +0900
9373 [MIPS] u-boot.lds: Fix __got_start and __got_end
9375 Ensure that __got_start points to top of the `.got', and __got_end points
9376 to bottom as well, so that we never fail to count num_got_entries.
9378 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9380 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
9381 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9382 Date: Sun Oct 21 10:55:36 2007 +0900
9384 [MIPS] u-boot.lds: Remove duplicated .sdata section
9386 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9388 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
9389 Author: Wolfgang Denk <wd@denx.de>
9390 Date: Sun Oct 21 01:01:17 2007 +0200
9392 Minor coding style cleanup; update CHANGELOG
9394 Signed-off-by: Wolfgang Denk <wd@denx.de>
9396 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
9397 Author: Vlad Lungu <vlad@comsys.ro>
9398 Date: Thu Oct 4 20:47:10 2007 +0300
9402 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
9403 to do anything in eth_stop() if eth_init() was not called.
9404 Simplified RX path in order to avoid timeouts on really really
9405 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
9406 clever enough to cope with 1 packet per eth_rx().
9408 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
9410 commit df90968b48fb34fa9072fab150db2ac89678f537
9411 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
9412 Date: Mon Sep 24 13:32:13 2007 -0400
9414 Setting MSR[DE] in do_reset
9417 This patch ensures the soft reset of the board for the 85xx boards
9418 by setting the MSR[DE] in the do_reset function.
9420 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
9422 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
9423 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
9424 Date: Mon Sep 24 13:36:01 2007 -0400
9429 This patch fixes the MSR overwrite in the start.S when moving out of
9432 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
9434 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
9435 Author: Dan Wilson <dwilson@fulcrummicro.com>
9436 Date: Fri Oct 19 11:33:48 2007 -0500
9438 tsec driver should clear RHALT on startup
9440 This was causing problems for some people.
9442 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
9443 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
9444 Signed-off-by: Andy Fleming <afleming@freescale.com>
9446 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
9447 Author: Kumar Gala <galak@kernel.crashing.org>
9448 Date: Thu Oct 11 00:29:18 2007 -0500
9450 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
9452 On the MPC85xx CDS we have two issues:
9454 1. The device tree fixup code did not check to see if the property we are
9455 trying to update is actually found. Its possible that it would update
9456 random memory starting at 0.
9458 2. Newer Linux kernel's have moved the location of the PCI nodes to be
9459 sibilings of the soc node and not children. The explicit PATH to the PCI
9460 node would not be found for these device trees. Add the ability to handle
9461 both paths. In the future we shouldn't handle such fixups by explicit path.
9463 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9465 commit a3063eec775719b7e91023bbec3f64b3118791df
9466 Author: Kumar Gala <galak@kernel.crashing.org>
9467 Date: Thu Oct 11 00:18:48 2007 -0500
9469 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
9471 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
9472 console. Make it so we match that config what we tell Linux as the early
9475 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9477 commit e1ce3cb617bb06f91f82f98915391175addf3e82
9478 Author: Kumar Gala <galak@kernel.crashing.org>
9479 Date: Tue Oct 2 11:12:27 2007 -0500
9481 Remove magic numbers from cache related operations for mpc85xx
9483 The mpc85xx start code uses some magic numbers that we actually
9484 have #defines for in <config.h> so use those instead.
9486 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9488 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
9489 Author: Detlev Zundel <dzu@denx.de>
9490 Date: Fri Oct 19 16:47:26 2007 +0200
9494 Signed-off-by: Detlev Zundel <dzu@denx.de>
9496 commit 281df457c1aa50d2752165d0c5c3282d4027b974
9497 Author: Tony Li <tony.li@freescale.com>
9498 Date: Thu Oct 18 17:47:19 2007 +0800
9500 mpc83xx: Add configure entry for MPC83xx ATM support
9502 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
9505 Signed-off-by: Tony Li <tony.li@freescale.com>
9506 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9508 commit d2646554f529a9577515eceb0ec5eceee18244ba
9509 Author: Tony Li <tony.li@freescale.com>
9510 Date: Thu Oct 18 17:44:38 2007 +0800
9512 mpc83xx: pq-mds-pib.c typo error
9514 Correct to val8 from val.
9516 Signed-off-by: Tony Li <tony.li@freescale.com>
9517 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9519 commit 3e11ae80fec1ee12194940955431186abf6009c2
9520 Author: Stefan Roese <sr@denx.de>
9521 Date: Wed Oct 17 15:40:19 2007 +0200
9523 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
9525 Signed-off-by: Stefan Roese <sr@denx.de>
9527 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
9528 Author: Jon Loeliger <jdl@freescale.com>
9529 Date: Tue Oct 16 15:27:43 2007 -0500
9531 Initial mpc8610hpcd Makefile files.
9533 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9534 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
9535 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9538 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
9539 Author: Jon Loeliger <jdl@freescale.com>
9540 Date: Tue Oct 16 15:26:51 2007 -0500
9542 Initial mpc8610hpcd cpu/, README and include/ files.
9544 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9545 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
9546 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9547 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9549 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
9550 Author: Jon Loeliger <jdl@freescale.com>
9551 Date: Tue Oct 16 13:54:01 2007 -0500
9553 Initial mpc8610hpcd board files.
9555 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9556 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
9557 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9558 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9560 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
9561 Author: runet@innovsys.com <runet@innovsys.com>
9562 Date: Tue Oct 16 14:50:40 2007 -0500
9564 Make MPC8266ADS board compile again.
9566 Signed-off-by: Runet Torgersen <runet@innovsys.com>
9568 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
9569 Author: Jon Loeliger <jdl@freescale.com>
9570 Date: Mon Aug 27 12:41:03 2007 -0500
9572 86xx: Allow for fewer DDR slots per memory controller.
9574 As a direct correlation exists between DDR DIMM slots
9575 and SPD EEPROM addresses used to configure them, use
9576 the individually defined SPD_EEPROM_ADDRESS* values to
9577 determine if a DDR DIMM slot should have its SPD
9578 configuration read or not.
9580 Effectively, this now allows for 1 or 2 DIMM slots
9581 per memory controller.
9583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9585 commit 4d4a945e189a2f384c66432316da2788a0ac1607
9586 Author: Rodolfo Giometti <giometti@enneenne.com>
9587 Date: Mon Oct 15 11:59:17 2007 +0200
9589 PXA USB OHCI: "usb stop" implementation.
9591 Some USB keys need to be switched off before loading the kernel
9592 otherwise they can remain in an undefined status which prevents them
9593 to be correctly recognized by the kernel.
9595 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
9597 commit e2e93442e558cf1500e92861f99713b2f045ea22
9598 Author: Stefan Roese <sr@denx.de>
9599 Date: Mon Oct 15 11:39:00 2007 +0200
9601 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
9603 The I2C bootstrap values that can be setup via the "bootstrap" command,
9604 were setup incorrect regarding the generation of the internal sync PCI
9605 clock. The values for PLB clock == 133MHz were slighly incorrect and the
9606 values for PLB clock == 166MHz were totally incorrect. This could
9607 lead to a hangup upon booting while PCI configuration scan.
9609 This patch fixes this issue and configures valid PCI divisor values
9610 for the sync PCI clock, with respect to the provided external async
9613 Here the values of the formula in the chapter 14.2 "PCI clocking"
9614 from the 440EPx users manual:
9616 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
9618 33MHz async PCI frequency:
9620 => 32 <= 44.3 <= 65 (div = 3)
9623 => 32 <= 55.3 <= 65 (div = 3)
9625 66MHz async PCI frequency:
9627 => 65 <= 66.5 <= 132 (div = 2)
9630 => 65 <= 83 <= 132 (div = 2)
9632 Signed-off-by: Stefan Roese <sr@denx.de>
9634 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
9635 Author: Stefan Roese <sr@denx.de>
9636 Date: Mon Oct 15 11:29:33 2007 +0200
9638 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
9640 The BCSR status bit for the 66MHz PCI operation was correctly
9641 addressed (MSB/LSB problem). Now the correct currently setup
9642 PCI frequency is displayed upon bootup.
9644 This patch also fixes this problem on Rainier & Yellowstone, since these
9645 boards use the same souce code as Sequoia & Yosemite do.
9647 Signed-off-by: Stefan Roese <sr@denx.de>
9649 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
9650 Author: Martin Krause <martin.krause@tqs.de>
9651 Date: Wed Sep 26 17:55:56 2007 +0200
9653 TQM860M: adjust for doubled flash sector size.
9655 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
9656 doubled sector size.
9658 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9660 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
9661 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
9662 Date: Wed Sep 26 17:55:54 2007 +0200
9664 TQM8xx: Fix CAN timing.
9666 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9668 commit d43e489baf02afae49077791fb22332d240d8656
9669 Author: Martin Krause <martin.krause@tqs.de>
9670 Date: Thu Sep 27 14:54:36 2007 +0200
9672 TQM866M: fix SDRAM refresh
9674 At 133 MHz the current SDRAM refresh rate is too fast
9675 (measured 4 * 1.17 us).
9676 CFG_MAMR_PTA changes from 39 to 97. This result
9677 in a refresh rate of 4 * 7.8 us at the default clock
9678 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
9679 This is a compromise until a new method is found to
9680 adjust the refresh rate.
9682 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9684 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
9685 Author: Martin Krause <martin.krause@tqs.de>
9686 Date: Wed Sep 26 17:55:55 2007 +0200
9688 TQM866M: adjust for doubled flash sector size.
9690 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
9691 doubled sector size.
9693 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9695 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
9696 Author: Michal Simek <monstr@monstr.eu>
9697 Date: Sun Oct 14 16:12:29 2007 +0200
9699 [FIX] XUPV2P change command handling
9700 and remove code violation
9702 commit 636400198228d96983c06657b17f760f5989958e
9703 Author: Wolfgang Denk <wd@denx.de>
9704 Date: Sun Oct 14 00:13:19 2007 +0200
9706 Prepare for 1.3.0-rc3 release
9708 Signed-off-by: Wolfgang Denk <wd@denx.de>
9710 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
9711 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9712 Date: Sat Sep 29 13:41:37 2007 +0200
9714 Fix warning differ in signedness in cpu/pxa/mmc.c
9716 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9718 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
9719 Author: Wolfgang Denk <wd@denx.de>
9720 Date: Sat Oct 13 23:51:14 2007 +0200
9722 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
9724 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9725 Signed-off-by: Wolfgang Denk <wd@denx.de>
9727 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
9728 Author: Wolfgang Denk <wd@denx.de>
9729 Date: Sat Oct 13 21:15:39 2007 +0200
9731 Coding Style cleanup.
9733 Signed-off-by: Wolfgang Denk <wd@denx.de>
9735 commit e1893815b0999410d7a327589611c7b38e95299e
9736 Author: Wolfgang Denk <wd@denx.de>
9737 Date: Fri Oct 12 15:49:39 2007 +0200
9741 Signed-off-by: Wolfgang Denk <wd@denx.de>
9743 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
9744 Author: Grzegorz Bernacki <gjb@semihalf.com>
9745 Date: Tue Oct 9 13:58:24 2007 +0200
9747 [ads5121] EEPROM support added.
9749 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9751 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
9752 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
9753 Date: Sat Oct 6 18:55:35 2007 +0200
9755 AVR32: Initialize bi_flash* in board_init_r
9757 The ATSTK1000-specific flash driver intializes bi_flashstart,
9758 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
9761 Initialize these in board_init_r instead so that things will still be
9762 set up correctly when we switch to the CFI driver.
9764 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9766 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
9767 Author: Marian Balakowicz <m8@semihalf.com>
9768 Date: Fri Oct 5 10:40:54 2007 +0200
9770 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
9772 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9774 commit 92869195ef8210758d2176230c0a36897afd50ed
9775 Author: Bartlomiej Sieka <tur@semihalf.com>
9776 Date: Fri Oct 5 09:46:06 2007 +0200
9778 CM5200: Fix missing null-termination in hostname manipulation code
9780 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9782 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
9783 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
9784 Date: Tue Oct 2 19:09:01 2007 +0200
9786 Fix memtest breakage
9788 CFG_MEMTEST_START uses weird magic involving gd, which fails to
9789 compile. Use hardcoded values instead (we actually know how much RAM
9792 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9794 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
9795 Author: Stefan Roese <sr@denx.de>
9796 Date: Tue Oct 2 11:44:46 2007 +0200
9798 ppc4xx: Coding style cleanup
9800 Signed-off-by: Stefan Roese <sr@denx.de>
9802 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
9803 Author: Stefan Roese <sr@denx.de>
9804 Date: Tue Oct 2 11:44:19 2007 +0200
9806 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
9808 Signed-off-by: Stefan Roese <sr@denx.de>
9810 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
9811 Author: Grzegorz Bernacki <gjb@semihalf.com>
9812 Date: Mon Oct 1 09:51:50 2007 +0200
9814 Program EPLD to force full duplex mode for PHY.
9816 EPLD forces modes of PHY operation. By default full duplex is turned off.
9817 This fix turns it on.
9819 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9821 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
9822 Author: Timo Ketola <timo.ketola@exertus.fi>
9823 Date: Mon Sep 24 14:50:32 2007 +0300
9825 Bugfix: Use only one PTD for one endpoint
9827 Original isp116x-hcd code prepared multiple PTDs for longer than 16
9828 byte transfers for one endpoint. That is unnecessary because the
9829 ISP116x is able to split long data from one PTD into multiple
9830 transactions based on the buffer size of the endpoint. It also caused
9831 serious problems if the endpoint NAKed some of the transactions. In
9832 that case ISP116x wouldn't notice that the other PTDs were for the same
9833 endpoint and would try the other PTDs possibly out of order. That would
9834 break the whole transfer.
9836 This patch makes isp116x_submit_job to use one PTD for one transfer.
9838 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
9839 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9841 commit 86ec86c04326c3913178a7679aa910de071da75d
9842 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9843 Date: Thu Sep 27 23:27:47 2007 +0200
9845 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
9847 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9849 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
9850 Author: Stefan Roese <sr@denx.de>
9851 Date: Tue Sep 11 14:12:55 2007 +0200
9853 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
9855 Signed-off-by: Stefan Roese <sr@denx.de>
9857 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
9858 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9859 Date: Wed Sep 26 16:35:54 2007 -0500
9861 85xx io out functions need sync after write.
9863 This fixes the mc146818 rtc_read/write functions for 85xx.
9865 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9867 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
9868 Author: Grant Likely <grant.likely@secretlab.ca>
9869 Date: Tue Sep 25 15:48:05 2007 -0600
9871 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
9873 CFG_FPGA_XILINX is a bit value used to test against the value in
9874 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
9875 think that is the intention in this code.
9877 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9879 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
9880 Author: Michal Simek <monstr@monstr.eu>
9881 Date: Mon Sep 24 00:41:30 2007 +0200
9883 [FIX] change command handling and removing code violation
9885 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
9886 Author: Michal Simek <monstr@monstr.eu>
9887 Date: Mon Sep 24 00:36:06 2007 +0200
9889 [FIX] change sets of commands
9890 because changing of command handling brings
9891 compilation problems
9893 commit cb1bc63b75a232571eb69aa2c8aa919321655845
9894 Author: Michal Simek <monstr@monstr.eu>
9895 Date: Mon Sep 24 00:30:42 2007 +0200
9897 [FIX] Email reparation & Copyright
9898 Both codes are written by myself without any
9901 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
9902 Author: Michal Simek <monstr@monstr.eu>
9903 Date: Mon Sep 24 00:25:11 2007 +0200
9905 [PATCH] Change macro name for UartLite
9906 because PowerPC 405 can use UartLite as console
9908 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
9909 Author: Michal Simek <monstr@monstr.eu>
9910 Date: Mon Sep 24 00:21:19 2007 +0200
9912 [PATCH] Add support for design without interrupt controller
9915 commit 0731933ec8ec45d02ba89b52df673d526873cdde
9916 Author: Michal Simek <monstr@monstr.eu>
9917 Date: Mon Sep 24 00:19:48 2007 +0200
9919 [FIX] resolve problem with cpu without barrel shifter
9921 commit db14d77995ce515b728b178b63f82babe60e3d56
9922 Author: Michal Simek <monstr@monstr.eu>
9923 Date: Mon Sep 24 00:18:46 2007 +0200
9925 [FIX] repair email address
9927 commit 481d4328618804add1f818a6c96296121cd0528e
9928 Author: Michal Simek <monstr@monstr.eu>
9929 Date: Mon Sep 24 00:17:42 2007 +0200
9931 [FIX] repair MFSL commands
9933 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
9934 Author: Michal Simek <monstr@monstr.eu>
9935 Date: Mon Sep 24 00:08:37 2007 +0200
9937 synchronizition with mainline
9939 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
9940 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9941 Date: Sun Sep 23 02:42:38 2007 +0900
9943 sh: Add support command of ide with sh
9945 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9947 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
9948 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9949 Date: Sun Sep 23 02:38:42 2007 +0900
9953 Add support MS7722SE01 to Makefile.
9955 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9957 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
9958 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9959 Date: Sun Sep 23 02:31:13 2007 +0900
9961 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
9963 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9965 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
9966 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9967 Date: Sun Sep 23 02:19:24 2007 +0900
9969 sh: Update MS7750SE01 platform
9971 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9973 commit 516ad760db3553766267ada01b7d5d727faa4bbd
9974 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9975 Date: Sun Sep 23 02:17:08 2007 +0900
9977 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
9979 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9981 commit b02bad128669e567fce87d8df823b06a0144b8db
9982 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9983 Date: Sun Sep 23 02:12:30 2007 +0900
9985 sh: Update core code of SuperH.
9987 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9989 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
9990 Author: Wolfgang Denk <wd@denx.de>
9991 Date: Thu Sep 20 00:04:14 2007 +0200
9995 Signed-off-by: Wolfgang Denk <wd@denx.de>
9997 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
9998 Author: Wolfgang Denk <wd@denx.de>
9999 Date: Tue Sep 18 21:36:35 2007 +0200
10001 Avoid compiler warning.
10003 Signed-off-by: Wolfgang Denk <wd@denx.de>
10005 commit 8a783a65851bc7421ab69f442261215e21b8891a
10006 Author: Grant Likely <grant.likely@secretlab.ca>
10007 Date: Tue Sep 18 12:24:57 2007 -0600
10009 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
10011 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
10012 nulls in a string differently. For example, the following statement:
10013 echo "this is a string\0" > afile
10014 Will produce the following with /bin/bash:
10015 "this is a string\0"
10016 But with /bin/dash, will produce:
10019 Bug fixed by moving the embedded null out of the makefile and into the
10020 config header. Also renamed the macro to avoid usage colision with the same
10021 macro used by other board ports.
10023 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10025 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
10026 Author: Wolfgang Denk <wd@denx.de>
10027 Date: Tue Sep 18 17:40:27 2007 +0200
10029 MCC200: fix build warning
10031 The MCC200 board config file includes version.h for some customer-
10032 specific setting, which causes warnings with "make depend"; build
10033 version.h before depend.
10035 Signed-off-by: Wolfgang Denk <wd@denx.de>
10037 commit bd86220f58b99d6896198c385fda132f0c980915
10038 Author: Peter Pearse <peter.pearse@arm.com>
10039 Date: Tue Sep 18 13:07:54 2007 +0100
10041 Move coloured led API to status_led.h
10042 Improve indentation in drivers/at45.c
10044 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
10045 Author: Eirik Aanonsen <eaa@wprmedical.com>
10046 Date: Tue Sep 18 08:47:20 2007 +0200
10048 Update atstk1002 bootargs.
10050 Updates to atstk1002 U-Boot header file:
10051 - Changed bootargs:
10052 * Set the bootargs for at1002 to point to the SD-card partition instead
10053 * ... of the boot flash.
10054 * Removing the rootfstype since that argument are not needed.
10056 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
10057 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10059 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
10060 Author: Eirik Aanonsen <eaa@wprmedical.com>
10061 Date: Wed Sep 12 13:32:37 2007 +0200
10063 Add some comments to clocks in atstk1002.h
10065 This patch applies some clarifying comments to how the different
10066 clocks are setup according to atstk1002.h Some of the previous
10067 comments where stating wrongful information.
10069 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10071 commit 97213f32416ead885deafea86774e912ffd60ad0
10072 Author: David Saada <David.Saada@ecitele.com>
10073 Date: Mon Sep 17 17:04:47 2007 +0200
10075 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
10077 Signed-off-by: David Saada <david.saada@ecitele.com>
10079 commit 30363e98fa470fbecea5e8bc0f1443352754f303
10080 Author: Stefan Roese <sr@denx.de>
10081 Date: Mon Sep 17 08:20:47 2007 +0200
10083 Small whitespace cleanup of OneNAND patch
10085 Signed-off-by: Stefan Roese <sr@denx.de>
10087 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
10088 Author: Kyungmin Park <kmpark@infradead.org>
10089 Date: Mon Sep 10 17:15:14 2007 +0900
10091 OneNAND support (take #2)
10093 [PATCH 3/3] OneNAND support (take #2)
10095 OneNAND support at U-Boot
10097 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10099 commit 17aa2800457df0c06b41516f46f126712c196219
10100 Author: Kyungmin Park <kmpark@infradead.org>
10101 Date: Mon Sep 10 17:14:34 2007 +0900
10103 OneNAND support (take #2)
10105 [PATCH 2/3] OneNAND support (take #2)
10107 OneNAND support at U-Boot
10109 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10111 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
10112 Author: Kyungmin Park <kmpark@infradead.org>
10113 Date: Mon Sep 10 17:13:49 2007 +0900
10115 OneNAND support (take #2)
10117 [PATCH 1/3] OneNAND support (take #2)
10119 OneNAND support at U-Boot
10121 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10123 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
10124 Author: Michal Simek <monstr@monstr.eu>
10125 Date: Sun Sep 16 20:51:57 2007 +0200
10127 [FIX] remove files form repository
10129 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
10130 Author: Wolfgang Denk <wd@denx.de>
10131 Date: Sun Sep 16 17:10:04 2007 +0200
10133 TQM8xx[LM]: Fix broken environment alignment.
10135 With recent toolchains, the environment sectors were no longer aligned to
10136 sector boundaries. The reason was a combination of two bugs:
10138 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
10139 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
10140 this gets defined, is not included here (and cannot be included
10141 without causing lots of problems).
10143 Added a new #define CFG_USE_PPCENV for all boards which really
10144 want to put the environment is a ".ppcenv" section.
10146 2) The linker scripts just include environment.o, silently assuming
10147 that the objects in that file are really in the order in which
10148 they are coded in the C file, i. e. "environment" first, then
10149 "redundand_environment", and "env_size" last. However, current
10150 toolchains (GCC-4.x) reorder the objects, causing the environment
10151 data not to start on a flash sector boundary:
10153 Instead of: we got:
10155 40008000 T environment 40008000 T env_size
10156 4000c000 T redundand_environment 40008004 T redundand_environment
10157 40010000 T env_size 4000c004 T environment
10159 Note: this patch fixes just the first part, and cures the alignment
10160 problem by making sure that "env_size" gets placed correctly. However,
10161 we still have a potential issue because primary and redundant
10162 environment sectors are actually swapped, i. e. we have now:
10164 40008000 T redundand_environment
10165 4000c000 T environment
10166 40010000 T env_size
10168 This shall be fixed in the next version.
10170 Signed-off-by: Wolfgang Denk <wd@denx.de>
10172 commit eb6da8050797c204c9d010548424186c7ce32fc1
10173 Author: Wolfgang Denk <wd@denx.de>
10174 Date: Sun Sep 16 02:39:35 2007 +0200
10176 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
10178 Signed-off-by: Wolfgang Denk <wd@denx.de>
10180 commit cd2d1602c54cc6957bdef3872272a4b264893960
10181 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
10182 Date: Mon Sep 10 14:54:56 2007 -0400
10186 Fixup for the break statement in wrong place.
10188 [Patch by urwithsughosh@gmail.com]
10189 Acked-by: Andy Fleming <afleming@freescale.com>
10190 Signed-off-by: Wolfgang Denk <wd@denx.de>
10192 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
10193 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10194 Date: Tue Sep 11 17:04:00 2007 +0200
10196 Fix do_div() usage in nand process output
10198 Fix usage of do_div() in nand erase|read|write process output.
10200 The last patch to nand_util.c introduced do_div() instead of libgcc's
10201 implementation. But do_div() returns the quotient in its first
10202 macro parameter and not as result.
10204 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10206 commit c750d2e6692a000a82f29de7bf24e3dc21239161
10207 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10208 Date: Wed Sep 12 12:36:53 2007 +0200
10210 NAND: Add CFG_NAND_QUIET option
10212 This config option sets the default for the progress information
10213 output behavior that can also be configured through the 'quiet'
10214 environment variable.
10216 The legacy NAND code does not print the current progress info
10217 on the console. So this option is for backward compatibility for
10218 units that are in the field and where setting the quiet variable
10219 is not an option. With CFG_NAND_QUIET set to '1' the console
10220 progress info is turned off. This can still be overwritten
10221 through the environment variable.
10223 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10225 commit dcb88630290d2bcd803386dd4c2be73142994c4f
10226 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
10227 Date: Thu Sep 13 16:06:05 2007 -0700
10229 ColdFire: fix build error becasue of bad type of mii_init()
10231 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10233 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
10234 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
10235 Date: Thu Sep 13 16:04:05 2007 -0700
10237 ColdFire: Fix build error caused by pixis.c
10239 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
10241 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10243 commit e21659e30660a1377c42af135a6114efe39801d9
10244 Author: Sam Sparks <SSparks@twacs.com>
10245 Date: Fri Sep 14 11:14:42 2007 -0600
10247 Update MPC8349ITX*_config to place config.tmp in right place.
10249 MPC834ITX*_config does not store config.tmp at the correct locatation,
10250 causing MPC8349ITXGP to have the wrong TEXT_BASE.
10252 Signed-off-by: Sam Sparks <SSparks@twacs.com>
10253 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10255 commit 1218abf1b5817a39a82399b4b928b00750575bda
10256 Author: Wolfgang Denk <wd@denx.de>
10257 Date: Sat Sep 15 20:48:41 2007 +0200
10259 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
10261 Signed-off-by: Wolfgang Denk <wd@denx.de>
10263 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
10264 Author: Dirk Behme <dirk.behme@googlemail.com>
10265 Date: Sat Sep 15 11:55:42 2007 +0200
10267 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
10269 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
10272 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
10274 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
10276 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
10277 Author: Michal Simek <monstr@monstr.eu>
10278 Date: Sat Sep 15 00:03:35 2007 +0200
10280 Synchronize with U-BOOT mainline
10282 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
10283 Author: Sam Sparks <SSparks@twacs.com>
10284 Date: Fri Sep 14 11:14:42 2007 -0600
10286 Update MPC8349ITX*_config to place config.tmp in right place.
10288 MPC834ITX*_config does not store config.tmp at the correct locatation,
10289 causing MPC8349ITXGP to have the wrong TEXT_BASE.
10291 Signed-off-by: Sam Sparks <SSparks@twacs.com>
10292 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10293 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10295 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
10296 Author: Bartlomiej Sieka <tur@semihalf.com>
10297 Date: Thu Sep 13 18:21:48 2007 +0200
10299 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
10301 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10303 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
10304 Author: Bartlomiej Sieka <tur@semihalf.com>
10305 Date: Thu Sep 13 16:33:59 2007 +0200
10307 tqm5200: Restore customary env. variable boot commands for powerpc kernels
10309 - update default definitions of kernel_addr and fdt_addr env. variables
10310 - make arch/powerpc booting the default scenario
10311 - update MTD partition layout to match the above
10313 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10315 commit f34024d4a328e6edd906456da98d2c537155c4f7
10316 Author: Wolfgang Denk <wd@denx.de>
10317 Date: Wed Sep 12 00:48:57 2007 +0200
10319 Fix memory corruption problem on STX GP3 SSA Board.
10321 Signed-off-by: Wolfgang Denk <wd@denx.de>
10323 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
10324 Author: Peter Pearse <peter.pearse@arm.com>
10325 Date: Tue Sep 11 15:35:01 2007 +0100
10329 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
10330 Author: Grzegorz Bernacki <gjb@semihalf.com>
10331 Date: Tue Sep 11 15:42:11 2007 +0200
10333 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
10334 scan on second pci bus.
10336 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10338 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
10339 Author: Grzegorz Bernacki <gjb@semihalf.com>
10340 Date: Tue Sep 11 12:57:52 2007 +0200
10342 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
10344 Bamboo has a file sdram.c which needs special treatment when building in
10345 separate directory. It has to be linked to build directory otherwise it is
10348 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10350 commit d45963854eff39d575124d859419bb4953ce2c87
10351 Author: Michal Simek <monstr@monstr.eu>
10352 Date: Tue Sep 11 00:37:04 2007 +0200
10354 [FIX] Microblaze ML401 - repare FLASH handling
10356 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
10357 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
10358 Date: Mon Sep 10 16:55:59 2007 +0100
10360 Allocate CPU Architecture Code for STMicroelectronics' ST200.
10362 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
10363 ---------------------------------------------------
10365 commit 754bac48156f8958d8f6a53a51eda88ab5758929
10366 Author: Wolfgang Denk <wd@denx.de>
10367 Date: Mon Sep 10 20:42:31 2007 +0200
10369 Update version to match current state.
10371 Signed-off-by: Wolfgang Denk <wd@denx.de>
10373 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
10374 Author: Grzegorz Bernacki <gjb@semihalf.com>
10375 Date: Mon Sep 10 17:39:08 2007 +0200
10377 [MPC512x] Streamline frame handling in the FEC driver
10379 - convert frame size settings to be derived from a single base
10380 - set frame size to the recommended default value
10382 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10384 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
10385 Author: Kyungmin Park <kmpark@infradead.org>
10386 Date: Mon Sep 10 11:34:00 2007 +0900
10388 Remove compiler warning: target CPU does not support interworking
10390 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10392 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
10393 Author: Wolfgang Denk <wd@denx.de>
10394 Date: Sun Sep 9 21:21:33 2007 +0200
10396 Fix compile error in spc1920 config.
10398 Signed-off-by: Markus Klotzbücher <mk@denx.de>
10399 Signed-off-by: Wolfgang Denk <wd@denx.de>
10401 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
10402 Author: Grant Likely <grant.likely@secretlab.ca>
10403 Date: Fri Sep 7 09:25:07 2007 -0600
10405 Bugfix: make bootm+libfdt compile on boards with no flash
10407 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10409 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
10410 Author: Grzegorz Bernacki <gjb@semihalf.com>
10411 Date: Fri Sep 7 18:35:37 2007 +0200
10413 [PPC440SPe] PCIe environment settings for Katmai and Yucca
10415 - 'pciconfighost' is set by default in order to be able to scan bridges
10416 behind the primary host/PCIe
10418 - 'pciscandelay' env variable is recognized to allow for user-controlled
10419 delay before the PCIe bus enumeration; some peripheral devices require a
10420 significant delay before they can be scanned (e.g. LSI8408E); without the
10421 delay they are not detected
10423 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10425 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
10426 Author: Grzegorz Bernacki <gjb@semihalf.com>
10427 Date: Fri Sep 7 18:20:23 2007 +0200
10429 [PPC440SPe] Improve PCIe configuration space access
10431 - correct configuration space mapping
10432 - correct bus numbering
10433 - better access to config space
10435 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
10436 first device on the first bus. We now allow to configure up to 16 buses;
10437 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
10438 peripheral devices farther in hierarchy can be identified.
10440 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10442 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
10443 Author: Grzegorz Bernacki <gjb@semihalf.com>
10444 Date: Fri Sep 7 17:46:18 2007 +0200
10446 [PPC440SPe] Convert machine check exceptions handling
10448 Convert using fixup mechanism to suppressing MCK for the duration of config
10449 read/write transaction: while fixups work fine with the case of a precise
10450 exception, we identified a major drawback with this approach when there's
10451 an imprecise case. In this scenario there is the following race condition:
10452 the fixup is (by design) set to catch the instruction following the one
10453 actually causing the exception; if an interrupt (e.g. decrementer) happens
10454 between those two instructions, the ISR code is executed before the fixup
10455 handler the machine check is no longer protected by the fixup handler as it
10456 appears as within the ISR code. In consequence the fixup approach is being
10457 phased out and replaced with explicit suppressing of MCK during a PCIe
10458 config read/write cycle.
10460 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10462 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
10463 Author: Wolfgang Denk <wd@denx.de>
10464 Date: Fri Sep 7 17:43:36 2007 +0200
10466 Fix typo in MAKEALL script.
10468 Signed-off-by: Wolfgang Denk <wd@denx.de>
10470 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
10471 Author: Grzegorz Bernacki <gjb@semihalf.com>
10472 Date: Fri Sep 7 17:09:21 2007 +0200
10474 [MPC512x] Proper handling of larger frames in the FEC driver
10476 When frame larger than local RX buffer is received, it is split and handled
10477 by two buffer descriptors. Prior to this patch the FEC driver discarded
10478 contents of a buffer descriptor without the 'LAST' bit set, so the first
10479 part of the frame was lost in case of larger frames. This fix allows to
10480 safely combine the two pieces into the whole frame.
10482 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10484 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
10485 Author: Rafal Jaworowski <raj@semihalf.com>
10486 Date: Fri Sep 7 17:05:36 2007 +0200
10488 [MPC512x] Correct fixup relocation
10490 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
10492 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
10493 Author: Wolfgang Denk <wd@denx.de>
10494 Date: Fri Sep 7 01:21:25 2007 +0200
10496 Update CHANGELOG, minor coding style cleanup.
10498 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
10499 Author: stefano babic <sbabic@denx.de>
10500 Date: Thu Aug 30 23:01:49 2007 +0200
10502 PXA270: Added support for TrizepsIV board.
10504 This patch add support for the Trizeps IV module (520Mhz).
10506 Signed-off-by: Stefano Babic <sbabic@denx.de>
10508 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
10509 Author: stefano babic <sbabic@denx.de>
10510 Date: Thu Aug 30 22:57:04 2007 +0200
10512 PXA270: Add support for multiple serial ports.
10514 This patch adds support for multiple serial ports to the PXA target.
10515 FFUART, BTUART and STUART are supported.
10517 Signed-off-by: Stefano Babic <sbabic@denx.de>
10519 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
10520 Author: stefano babic <sbabic@denx.de>
10521 Date: Thu Aug 30 22:48:47 2007 +0200
10523 PXA270: fix compile issue (invalid lvalue)
10525 Code is broken for PXA270 due to "invalid lvalue in assignment".
10527 This patch fix it in pxa-regs.h
10529 Signed-off-by: Stefano Babic <sbabic@denx.de>
10531 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
10532 Author: Jason Jin <Jason.jin@freescale.com>
10533 Date: Thu Aug 30 18:19:05 2007 +0800
10535 Add BUILD_DIR support for bios emulator.
10537 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
10539 commit b4d8a55145442f136982634862341a3e02002bda
10540 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10541 Date: Fri Aug 31 14:41:51 2007 +0900
10543 [MIPS] Remove inline asm string functions
10545 Stop using inline string functions on MIPS as other ARCHs do so,
10546 since the optimized inline asm versions are not small.
10548 This change is triggered by a following MIPS build error:
10549 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
10550 common/exports.c:32: undefined reference to `strcmp'
10551 make: *** [u-boot] Error 1
10553 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10555 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
10556 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10557 Date: Fri Aug 31 14:41:45 2007 +0900
10559 [MIPS] Update asm string header
10561 This patches contains several bugfixes and cleanups in the latest upstream:
10563 - Don't include linux/config.h
10564 - Remove buggy inline version of memscan.
10565 - Merge with Linux 2.6.11-rc3.
10566 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
10567 - Goodbye mips64. 31704 lines of code bite the dust.
10568 - Replace extern inline with static inline.
10569 - Fix return value of strncpy.
10570 - Remove a bunch more "$1" clobbers.
10572 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10574 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
10575 Author: Bartlomiej Sieka <tur@semihalf.com>
10576 Date: Tue Sep 4 17:31:22 2007 +0200
10578 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
10580 Fix incorrect blob address calculation in do_bootm_linux() that prevents
10581 booting the kernel from a multi-file image (kernel + initrd + blob).
10583 Also, make minor updates to the U-Boot's output and to the coding style.
10585 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10587 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
10588 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
10589 Date: Fri Aug 31 14:29:04 2007 +0200
10591 Add support for Sil680 IDE controller.
10593 o add drivers/sil680.c to support the Sil680 IDE-controller.
10594 o drivers/Makefile: add sil680.o.
10596 Signed-off-by: Gary Jennejohn <garyj@denx.de>
10598 commit e79021223bc339df655e360645a52c457a74b067
10599 Author: Grant Likely <grant.likely@secretlab.ca>
10600 Date: Thu Sep 6 09:47:40 2007 -0600
10602 bootm/fdt: Only process the fdt if an fdt address was provided
10604 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
10605 kernels using the board info structure (instead of passing a device tree)
10606 This change allows the old style booting to be used if the fdt argument
10607 was not passed to 'bootm'.
10609 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10610 Acked-by: Kim Phillips <kim.phillips@freescale.com>
10612 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
10613 Author: Grant Likely <grant.likely@secretlab.ca>
10614 Date: Thu Sep 6 09:46:23 2007 -0600
10616 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
10618 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
10620 Tested on: lite5200b
10622 Note: the fixup functions have not been moved to a common place. This
10623 patch is targeted for immediate merging as in solves a build issue, but
10624 the final name/location of the fixups is still subject to debate. I
10625 propose to merge this now, and move the fixups in the next merge window
10626 to be usable by all targets.
10628 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10630 commit 41bb76e941929f54a73206fb132f7a4c275543a3
10631 Author: Grant Likely <grant.likely@secretlab.ca>
10632 Date: Thu Sep 6 09:46:17 2007 -0600
10634 libfdt: add convenience function fdt_find_and_setprop()
10636 Given the path to a node, fdt_find_and_setprop() allows a property value
10637 to be set directly.
10639 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10641 commit 80767a6cead9990d9e77e62be947843c2c72f469
10642 Author: Peter Pearse <peter.pearse@arm.com>
10643 Date: Wed Sep 5 16:04:41 2007 +0100
10645 Changed API name to coloured_led.h
10646 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
10647 Tidied other cpu/arm920t/start.S code
10649 commit 56a9270521baaa00e12639a978302a67f61ef060
10650 Author: Kumar Gala <galak@kernel.crashing.org>
10651 Date: Thu Aug 30 16:18:18 2007 -0500
10653 Fix ULI RTC support on MPC8544 DS
10655 The RTC on the M1575 ULI chipset requires a dummy read before
10656 we are able to talk to the RTC. We accomplish this by adding a
10657 second memory region to the PHB the ULI is on and read from it.
10659 The second region is added to maintain compatiabilty with Linux's
10660 view of the PCI memory map.
10662 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10664 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
10665 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10666 Date: Thu Aug 30 01:58:48 2007 -0500
10668 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
10670 pcie is now differentiated from pci. Add 8641 bus-range updates.
10672 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10674 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
10675 Author: Peter Pearse <peter.pearse@arm.com>
10676 Date: Tue Sep 4 16:18:38 2007 +0100
10678 Add coloured led interface for ARM boards.
10679 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
10681 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
10682 Author: Peter Pearse <peter.pearse@arm.com>
10683 Date: Tue Sep 4 14:49:28 2007 +0100
10685 Move include/led.h to board/at91rm9200dk
10687 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
10688 Author: Peter Pearse <peter.pearse@arm.com>
10689 Date: Tue Sep 4 14:25:51 2007 +0100
10691 Ran Lindent on drivers/at45.c
10693 commit 557ab89d294f08dd532f21d19861b40093200a33
10694 Author: Peter Pearse <peter.pearse@arm.com>
10695 Date: Tue Sep 4 14:23:50 2007 +0100
10697 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
10699 commit 81b73dec16fd1227369a191e725e10044a9d56b8
10700 Author: Gary Jennejohn <garyj@denx.de>
10701 Date: Fri Aug 31 15:21:46 2007 +0200
10703 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
10705 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
10706 set to non-zero, because it doesn't support MRM (memory-read-
10707 multiple) correctly. We now added the possibility to configure
10708 this register in the board config file, so that the default value
10709 of 8 can be overridden.
10711 Here the details of this patch:
10713 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
10714 board-specific settings. As an example the sequoia board requires 0.
10715 Idea from Stefan Roese <sr@denx.de>.
10716 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
10717 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
10718 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
10719 CFG_PCI_CACHE_LINE_SIZE to 0.
10721 Signed-off-by: Gary Jennejohn <garyj@denx.de>
10722 Signed-off-by: Stefan Roese <sr@denx.de>
10724 commit 60174746c668b309378a91488dded898e9553eae
10725 Author: Wolfgang Denk <wd@denx.de>
10726 Date: Fri Aug 31 10:01:51 2007 +0200
10728 Fix TFTP OACK code for short packets.
10730 The old code had a loop limit overflow bug which caused a semi-
10731 infinite loop for small packets, because in "i<len-8", "i" was signed,
10732 but "len" was unsigned, and "len-8" became a huge number for small
10735 This is a workaround which replaces broken commit 8f1bc284.
10737 Signed-off-by: Wolfgang Denk <wd@denx.de>
10739 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
10740 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10741 Date: Thu Aug 30 15:03:05 2007 +0200
10743 Reduce BOOTDELAY variable to 1 second by default for STK1002
10745 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10746 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10748 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
10749 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10750 Date: Thu Aug 30 15:03:04 2007 +0200
10752 Remove double quotation marks around MAC address for STK1002
10754 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10755 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10757 commit ff13ac8c7bbebb238e339592de765c546dba1073
10758 Author: Wolfgang Denk <wd@denx.de>
10759 Date: Thu Aug 30 14:42:15 2007 +0200
10761 Backout commit 8f1bc284 as it causes TFTP to fail.
10763 Signed-off-by: Wolfgang Denk <wd@denx.de>
10765 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
10766 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10767 Date: Thu Aug 30 02:26:17 2007 -0500
10769 Revert "Fix MPC8544DS PCIe3 scsi."
10771 This reverts commit 9468e680.
10772 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
10774 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10776 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
10777 Author: Grant Likely <grant.likely@secretlab.ca>
10778 Date: Wed Aug 29 18:26:24 2007 -0600
10780 tftp: don't implicity trust the format of recevied packets
10782 The TFTP OACK code trusts that the incoming packet is formated as
10783 ASCII text and can be processed by string functions. It also has a
10784 loop limit overflow bug where if the packet length is less than 8, it
10785 ends up looping over *all* of memory to find the 'blksize' string.
10787 This patch solves the problem by forcing the packet to be null
10788 terminated and using strstr() to search for the sub string.
10790 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
10792 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
10793 Author: Stefan Roese <sr@denx.de>
10794 Date: Wed Aug 29 16:31:18 2007 +0200
10796 ppc4xx: Change lwmon5 default environment to support Linux RTC
10798 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
10799 to supply the RTC I2C address as bootline parameter. This patch
10800 adds support for this rtc probing parameter to the bootargs:
10802 "rtc-pcf8563.probe=0,0x51"
10804 Signed-off-by: Stefan Roese <sr@denx.de>
10806 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
10807 Author: Kim Phillips <kim.phillips@freescale.com>
10808 Date: Wed Aug 29 09:06:05 2007 -0500
10810 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
10812 this had slipped through the cracks, since the sbc board was added
10813 after I wrote the original patch to remove all these symbols, and
10814 before it was merged.
10816 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10818 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
10819 Author: Wolfgang Denk <wd@denx.de>
10820 Date: Wed Aug 29 14:05:30 2007 +0200
10822 Add mii_init() prototype
10824 to get rid of a *lot* of compiler warnings.
10826 Signed-off-by: Wolfgang Denk <wd@denx.de>
10828 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
10829 Author: Wolfgang Denk <wd@denx.de>
10830 Date: Wed Aug 29 13:35:03 2007 +0200
10832 Disable network support on cmi_mpc5xx board
10834 ..because it caused compiler errors and there seems to be no
10835 board maintainer to take care of this.
10837 Signed-off-by: Wolfgang Denk <wd@denx.de>
10839 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
10840 Author: Kumar Gala <galak@kernel.crashing.org>
10841 Date: Mon Aug 20 09:44:00 2007 -0500
10843 Fix MPC8544DS PCIe3 scsi.
10845 <ed.swarthout@freescale.com>
10847 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
10848 is allocating memory space it doesn't need.
10850 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
10851 Signed-off-by: Andy Fleming <afleming@freescale.com>
10853 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
10854 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10855 Date: Tue Aug 21 09:38:59 2007 -0500
10859 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
10860 correct consoledev needed for linux boot.
10861 Standardize on fdt{file,addr} var to hold dtb file name.
10863 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
10865 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10867 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
10868 Author: Haiying Wang <Haiying.Wang@freescale.com>
10869 Date: Thu Aug 23 15:20:54 2007 -0400
10871 Enable L2 cache for MPC8568MDS board
10873 The L2 cache size is 512KB for 8568, print out the correct informaiton.
10875 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10877 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
10878 Author: Jason Jin <Jason.jin@freescale.com>
10879 Date: Wed Aug 22 17:54:49 2007 +0800
10881 Remove the bios emulator binary files from MAI board
10883 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
10885 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
10886 Author: Kim Phillips <kim.phillips@freescale.com>
10887 Date: Tue Aug 21 17:00:17 2007 -0500
10889 support board vendor-common makefiles
10891 if a board/$(VENDOR)/common/Makefile exists, build it.
10893 also add the first such case, board/freescale/common/Makefile, to
10894 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
10895 dictated by board configuration.
10897 thusly get rid of alternate build dir errors such as:
10899 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
10901 by putting the common/ mkdir command in its proper place (the common
10902 Makefile). Common bits from existing individual board Makefiles have
10905 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10907 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
10908 Author: stefano babic <sbabic@denx.de>
10909 Date: Tue Aug 21 15:52:33 2007 +0200
10911 Fix: TFTP is not working on little endian systems
10913 TFTP does not work anymore after multicast tftp
10914 patch was applied on little endian systems.
10917 Signed-off-by: Stefano Babic <sbabic@denx.de>
10919 commit 5f470948570526e9186f053a3003da7719604e90
10920 Author: stefano babic <sbabic@denx.de>
10921 Date: Tue Aug 21 15:50:33 2007 +0200
10923 Fix MAC address setting in DM9000 driver.
10925 The logic to check if there is a correct MAC address in the DM9000
10926 EEPROM, added in the last patch, is wrong. Now the MAC address is
10927 always taken from the environment, even if a suitable MAC is present
10930 Signed-off-by: Stefano Babic <sbabic@denx.de>
10932 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
10933 Author: Martin Krause <martin.krause@tqs.de>
10934 Date: Tue Aug 21 12:40:34 2007 +0200
10936 MPC5xxx: fix some compiler warnings in USB code
10938 Fix the following warnings:
10939 - usb.c:xx: warning: function declaration isn't a prototype
10940 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
10941 from pointer wihtout a cast
10943 Signed-off-by: Martin Krause <martin.krase@tqs.de>
10945 commit 16e23c3f5dab6937f5109365416808c7f15c122b
10946 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10947 Date: Mon Aug 20 23:55:33 2007 -0500
10949 fsl_pci_init - Remove self PCSRBAR allocation
10951 CPU physical address space was being wasted by allocating a
10952 PCSRBAR PCI inbound region to it's memory space.
10954 As a rule, PCSRBAR should be left alone since it does not affect
10955 transactions from self and other masters may have changed it.
10957 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
10959 commit 0e700ce03a23bb1921149bc77008ace7103d5289
10960 Author: Martin Krause <martin.krause@tqs.de>
10961 Date: Mon Aug 20 13:56:47 2007 +0200
10963 Fix compiler warning in include/s3c2410.h
10965 This patch fixes the "type qualifiers ignored on fuction return tpye"
10966 warning for include/s3c2410.h
10968 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10970 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
10971 Author: Dirk Behme <dirk.behme@googlemail.com>
10972 Date: Mon Aug 20 07:09:05 2007 +0200
10974 Fix compilation error for omap2420h4_config.
10976 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
10977 and flash_probe() calls in env_flash.c.
10979 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
10981 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
10982 Author: Kim Phillips <kim.phillips@freescale.com>
10983 Date: Fri Aug 10 14:34:14 2007 -0500
10985 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
10987 and make some minor corrections to the FDT part of the README.
10989 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10991 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
10992 Author: Wolfgang Denk <wd@denx.de>
10993 Date: Wed Aug 29 01:32:05 2007 +0200
10995 Minor coding style cleanup.
10997 Signed-off-by: Wolfgang Denk <wd@denx.de>
10999 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
11000 Author: Heiko Schocher <hs@pollux.denx.de>
11001 Date: Tue Aug 28 17:40:33 2007 +0200
11003 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
11005 Signed-off-by: Heiko Schocher <hs@denx.de>
11007 commit f98984cb194bb34dbe1db9429d3b51133af30d07
11008 Author: Heiko Schocher <hs@pollux.denx.de>
11009 Date: Tue Aug 28 17:39:14 2007 +0200
11011 IDE: - make ide_inb () and ide_outb () "weak", so boards can
11012 define there own I/O functions.
11013 (Needed for the pcs440ep board).
11014 - The default I/O Functions are again 8 Bit accesses.
11015 - Added CONFIG_CMD_IDE for the pcs440ep Board.
11017 Signed-off-by: Heiko Schocher <hs@denx.de>
11019 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
11020 Author: Semih Hazar <semih.hazar@indefia.com>
11021 Date: Mon Aug 20 19:00:01 2007 +0300
11023 AVR32: Change prototype of memset
11025 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
11026 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11028 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
11029 Author: Yuri Tikhonov <yur@emcraft.com>
11030 Date: Sat Aug 25 05:07:16 2007 +0200
11032 POST: limit memory test area to not touch global data anymore
11034 As experienced on lwmon5, on some boards the POST memory test can
11035 corrupt the global data buffer (bd). This patch fixes this issue
11036 by checking and limiting this area.
11038 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
11039 Signed-off-by: Stefan Roese <sr@denx.de>
11041 commit 75e1a84d483e36be10e206e539b028c4889e1158
11042 Author: Stefan Roese <sr@denx.de>
11043 Date: Fri Aug 24 15:41:42 2007 +0200
11045 ppc4xx: Add RTC POST test to lwmon5 board configuration
11047 Since this RTC POST test is taking quite a while to complete
11048 it's only initiated upon special keypress same as the complete
11051 Signed-off-by: Stefan Roese <sr@denx.de>
11053 commit d7bfa620037a6d2210159387571bdf93aa32c162
11054 Author: Stefan Roese <sr@denx.de>
11055 Date: Fri Aug 24 15:19:10 2007 +0200
11057 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
11059 Signed-off-by: Stefan Roese <sr@denx.de>
11061 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
11062 Author: Stefan Roese <sr@denx.de>
11063 Date: Thu Aug 23 11:02:37 2007 +0200
11065 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
11067 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
11068 board. Now the "eeprom" command can be used to read/write from/to this
11069 device. Additionally a new command was added "eepromwp" to en-/disable
11070 the write-protect of this 2nd EEPROM.
11072 The 1st EEPROM is not affected by this write-protect command.
11074 Signed-off-by: Stefan Roese <sr@denx.de>
11076 commit c64fb30e4c5976007d56fc1789c7a0666082b536
11077 Author: Stefan Roese <sr@denx.de>
11078 Date: Wed Aug 22 08:56:09 2007 +0200
11080 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
11082 Signed-off-by: Stefan Roese <sr@denx.de>
11084 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
11085 Author: Stefan Roese <sr@denx.de>
11086 Date: Tue Aug 21 16:27:57 2007 +0200
11088 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
11090 This patch adds support for the matrix keyboard on the lwmon5 board.
11091 Since the implementation in the dsPCI is kind of compatible with the
11092 "old" lwmon board, most of the code is copied from the lwmon
11095 Signed-off-by: Stefan Roese <sr@denx.de>
11097 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
11098 Author: Wolfgang Denk <wd@denx.de>
11099 Date: Sun Aug 19 10:27:34 2007 +0200
11101 Fix some build errors.
11103 Signed-off-by: Wolfgang Denk <wd@denx.de>
11105 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
11106 Author: Wolfgang Denk <wd@denx.de>
11107 Date: Sat Aug 18 22:00:38 2007 +0200
11111 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
11112 Author: Kim Phillips <kim.phillips@freescale.com>
11113 Date: Thu Aug 16 22:52:39 2007 -0500
11115 lib_ppc: make board_add_ram_info weak
11117 platforms wishing to display RAM diagnostics in addition to size,
11118 can do so, on one line, in their own board_add_ram_info()
11121 this consequently eliminates CONFIG_ADD_RAM_INFO.
11123 Thanks to Stefan for the hint.
11125 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11127 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
11128 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11129 Date: Fri Aug 17 12:43:44 2007 +0900
11131 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
11133 This patch has been sent on:
11136 Many users of PCI config read routines tend to ignore the function
11137 ret value, and are only concerned about the contents of *val. Based
11138 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
11139 the *val on dword read error.
11141 Without this fix, for example, we'll go on scanning bus with vendor or
11142 header_type uninitialized. This brings many unnecessary config trials.
11144 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11146 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
11147 Author: Stefan Roese <sr@denx.de>
11148 Date: Sat Aug 18 14:37:52 2007 +0200
11150 ColdFire: Fix some remaining problems with CFG_CMD_
11152 Signed-off-by: Stefan Roese <sr@denx.de>
11154 commit 8280f6a1c43247616b68224675188e5ccd124650
11155 Author: Stefan Roese <sr@denx.de>
11156 Date: Sat Aug 18 14:33:02 2007 +0200
11158 Coding style cleanup
11160 Signed-off-by: Stefan Roese <sr@denx.de>
11162 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
11163 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11164 Date: Thu Aug 16 19:23:50 2007 -0500
11166 ColdFire: Add M5235EVB Platform for MCF523x
11168 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11170 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
11171 Author: Kim Phillips <kim.phillips@freescale.com>
11172 Date: Fri Aug 17 09:30:00 2007 -0500
11174 mpc83xx: fix typo in DDR2 programming
11176 introduced in the implement board_add_ram_info patch as I was cleaning out the
11177 magic numbers. sorry.
11179 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11181 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
11182 Author: Kim Phillips <kim.phillips@freescale.com>
11183 Date: Thu Aug 16 22:53:09 2007 -0500
11185 mpc83xx: move freescale boards to boards/freescale
11187 includes build fixes.
11189 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11191 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
11192 Author: Kim Phillips <kim.phillips@freescale.com>
11193 Date: Thu Aug 16 22:52:59 2007 -0500
11195 mpc83xx: suppress unused variable 'val8' warning
11197 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11199 commit bbea46f76f767b919070b4829bf34c86bd223248
11200 Author: Kim Phillips <kim.phillips@freescale.com>
11201 Date: Thu Aug 16 22:52:48 2007 -0500
11203 mpc83xx: implement board_add_ram_info
11205 add board_add_ram_info, to make memory diagnostic output more
11206 consistent. u-boot banner output now looks like:
11208 DRAM: 256 MB (DDR1, 64-bit, ECC on)
11210 and for boards with SDRAM on the local bus, a line such as this is
11213 SDRAM: 64 MB (local bus)
11215 also replaced some magic numbers with their equivalent define names.
11217 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11219 commit 14778585d1389d86d5846efec29e5fce892680ce
11220 Author: Tony Li <tony.li@freescale.com>
11221 Date: Fri Aug 17 10:35:59 2007 +0800
11223 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
11225 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
11226 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
11228 Signed-off-by Tony Li <tony.li@freescale.com>
11230 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
11231 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11232 Date: Thu Aug 16 15:05:11 2007 -0500
11234 ColdFire: Add M54455EVB for MCF5445x
11236 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11238 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
11239 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11240 Date: Thu Aug 16 13:20:50 2007 -0500
11242 ColdFire: Add M5253EVBE platform for MCF52x2
11244 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11246 commit a605aacd8324094199402816cc6d9124aba57b8d
11247 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11248 Date: Thu Aug 16 05:04:31 2007 -0500
11250 ColdFire: Add M5249EVB platform for MCF52x2
11252 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11254 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
11255 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11256 Date: Wed Aug 15 20:32:06 2007 -0500
11258 ColdFire: Update Freescale MCF52x2 platforms
11260 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11262 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
11263 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11264 Date: Wed Aug 15 19:55:10 2007 -0500
11266 ColdFire: Update EB+MCF-EV123 platform
11268 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11270 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
11271 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11272 Date: Wed Aug 15 19:46:38 2007 -0500
11274 ColdFire: update TASREG platform for MCF52x2
11276 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11278 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
11279 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11280 Date: Wed Aug 15 19:45:51 2007 -0500
11282 ColdFire: update r5200 platform for MCF52x2
11284 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11286 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
11287 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11288 Date: Wed Aug 15 19:43:20 2007 -0500
11290 ColdFire: idmr platform MCF52x2 update
11292 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11294 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
11295 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11296 Date: Wed Aug 15 19:41:06 2007 -0500
11298 ColdFire: cobra5272 platform for MCF52x2 update
11300 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11302 commit 56115665b4a64c10c01440c57749b265e0908fa4
11303 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11304 Date: Wed Aug 15 19:38:15 2007 -0500
11306 ColdFire: MCF52x2 Header files update
11308 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11310 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
11311 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11312 Date: Wed Aug 15 19:21:21 2007 -0500
11314 ColdFire: MCF52x2 update
11316 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11318 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
11319 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11320 Date: Wed Aug 15 18:46:11 2007 -0500
11322 ColdFire: MCF5329 update cache
11324 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11326 commit 7171977fb8fd77cfb6676953fa9a05789c450513
11327 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11328 Date: Wed Aug 15 15:40:20 2007 -0500
11330 ColdFire: MCF5329 header file clean up
11332 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11334 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
11335 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11336 Date: Wed Aug 15 15:39:17 2007 -0500
11338 ColdFire: MCF5329 Update and cleanup
11340 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11342 commit 10327dc5541f947c0cf7e31fef86c4706169607a
11343 Author: Andy Fleming <afleming@freescale.com>
11344 Date: Thu Aug 16 16:35:02 2007 -0500
11346 Add CONFIG_HAS_ETH0 to all boards with TSEC
11348 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
11349 to update TSEC1's device-tree node, so we need to add it
11350 to all the boards with TSECs. Do this for 83xx and 86xx, too,
11351 since they will eventually do something similar.
11353 Signed-off-by: Andy Fleming <afleming@freescale.com>
11355 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
11356 Author: Kumar Gala <galak@kernel.crashing.org>
11357 Date: Thu Aug 16 15:05:04 2007 -0500
11359 Update MPC8544 DS PCI memory map
11361 The PCIe bus that the ULI M1575 is connected to has no possible way of
11362 needing more than the fixed amount of IO & Memory space needed by the ULI.
11364 So make it use far less IO & memory space and have it use the shared LAW. This
11365 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
11368 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11370 commit ea5877e31ed63ade948fd1293895ec23fe01472e
11371 Author: Kumar Gala <galak@kernel.crashing.org>
11372 Date: Thu Aug 16 11:01:21 2007 -0500
11374 Fix up some fdt issues on 8544DS
11376 It looks like we had a merge issue that duplicated a bit of code
11377 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
11378 the MAC address properly set in the device tree on boot for TSEC1
11380 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11382 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
11383 Author: Niklaus Giger <niklaus.giger@netstal.com>
11384 Date: Thu Aug 16 15:16:03 2007 +0200
11386 PPC4xx:HCU4/5 cleanup
11388 Minor cleanups to confirm to the u-boot coding style.
11389 Some german expressions -> english.
11390 HCU5 enforces a unique IP adress for a given slot in the rack.
11392 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11394 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
11395 Author: Niklaus Giger <niklaus.giger@netstal.com>
11396 Date: Thu Aug 16 15:16:02 2007 +0200
11398 PPC4xx:HCU4/5 cleanup ecc/sdram init
11400 Make ecc initialisation robust, as DDR2-ECC errors may be generated
11401 while zeroing the RAM.
11403 Return 16 bytes (a cacheline) less than the available memory, as the
11404 board and/or PPC440EPx might have problems accessing the last bytes.
11406 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11408 commit d35b508a55508535b6e8445b718585d27df733d3
11409 Author: Kim Phillips <kim.phillips@freescale.com>
11410 Date: Wed Aug 15 22:29:56 2007 -0500
11412 fdt: suppress unused variable 'bd' warning
11414 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11416 commit 82bd9ee77490588d4da785d75829ca63d0176baf
11417 Author: Andy Fleming <afleming@freescale.com>
11418 Date: Wed Aug 15 20:06:50 2007 -0500
11420 Fix warnings from of_data copy fix
11422 Forgot to cast of_flat_tree to ulong.
11424 Signed-off-by: Andy Fleming <afleming@freescale.com>
11426 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
11427 Author: Andy Fleming <afleming@freescale.com>
11428 Date: Wed Aug 15 20:03:44 2007 -0500
11430 Don't wait for disconnected TSECs
11432 The TSEC driver's PHY code waits a long time for autonegotiation to
11433 complete, even if the link is down. The PHY knows the link is
11434 down or up before autonegotiation completes, so we can short-circuit
11435 the process if the link is down.
11437 Signed-off-by: Andy Fleming <afleming@freescale.com>
11439 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
11440 Author: Andy Fleming <afleming@freescale.com>
11441 Date: Wed Aug 15 20:03:34 2007 -0500
11443 Fix numerous bugs in the 8568 UEC support
11445 Actually, fixed a large bug in the UEC for *all* platforms.
11446 How did this ever work?
11448 uec_init() did not follow the spec for eth_init(), and returned
11449 0 on success. Switch it to return the link like tsec_init()
11452 The immap for the 8568 was defined based on MPC8568, rather than
11457 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
11459 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
11462 Signed-off-by: Andy Fleming <afleming@freescale.com>
11464 commit 3a79013e2adda53332dfd0b511066a805e929a9d
11465 Author: Andy Fleming <afleming@freescale.com>
11466 Date: Wed Aug 15 20:03:25 2007 -0500
11468 Define tsec flag values in config files
11470 The tsec_info structure and array has a "flags" field for each
11471 ethernet controller. This field is the only reason there are
11472 settings. Switch to defining TSECn_FLAGS for each controller
11473 in the config header, and we can greatly simplify the array, and
11474 also simplify the addition of future boards.
11476 Signed-off-by: Andy Fleming <afleming@freescale.com>
11478 commit ec7238229507e7f47533a611ea8c53319d234cf3
11479 Author: Andy Fleming <afleming@freescale.com>
11480 Date: Wed Aug 15 20:03:13 2007 -0500
11482 Add support for building all boards with a TSEC
11484 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
11485 Now we can do a MAKEALL test on all of them!
11487 Signed-off-by: Andy Fleming <afleming@freescale.com>
11489 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
11490 Author: Andy Fleming <afleming@freescale.com>
11491 Date: Wed Aug 15 17:30:56 2007 -0500
11493 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
11495 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
11496 neglected to *also* put the code inside the similar #ifdef
11497 for CONFIG_OF_FLAT_TREE.
11499 Signed-off-by: Andy Fleming <afleming@freescale.com>
11501 commit 78f9fef7f406078c8bf7191e665a73f795157746
11502 Author: Scott Wood <scottwood@freescale.com>
11503 Date: Wed Aug 15 15:46:46 2007 -0500
11505 mpc885ads: Don't define CONFIG_BZIP2.
11507 bzip2 requires a significant chunk of malloc space, and there isn't
11508 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
11509 and a downloaded image at 0x400000.
11511 Signed-off-by: Scott Wood <scottwood@freescale.com>
11513 commit 002275a3ed8b114885f6702d6d544d0780dfe689
11514 Author: Michal Simek <Monstr@seznam.cz>
11515 Date: Thu Aug 16 08:54:10 2007 +0200
11517 Bios emulator - fix microblaze toolchain problem
11519 microblaze CPU have problem with bios_emulator code.
11520 Microblaze toolchain doesn't support PRAGMA PACK.
11522 Signed-off-by: Michal Simek <monstr@monstr.eu>
11524 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
11525 Author: Wolfgang Denk <wd@denx.de>
11526 Date: Thu Aug 16 11:51:04 2007 +0200
11528 Minor Coding Style fix; Update CHANGELOG file.
11530 Signed-off-by: Wolfgang Denk <wd@denx.de>
11532 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
11533 Author: Stefan Roese <sr@denx.de>
11534 Date: Thu Aug 16 11:21:49 2007 +0200
11536 ppc4xx: Remove #warning in esd auto_update.c
11538 Signed-off-by: Stefan Roese <sr@denx.de>
11540 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
11541 Author: Stefan Roese <sr@denx.de>
11542 Date: Fri Jun 22 17:32:28 2007 +0200
11544 ppc7xx: Update CPCI750 board
11546 This small CPCI750 update extends the board specific command
11547 "show_config" to display the Marvell strapping registers and
11548 extends the PCI IDE controller.
11550 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
11551 Signed-off-by: Stefan Roese <sr@denx.de>
11553 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
11554 Author: Michal Simek <monstr@monstr.eu>
11555 Date: Thu Aug 16 10:46:28 2007 +0200
11557 [FIX] Changes for bios_emulator code for others architecture
11559 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
11560 Author: Michal Simek <monstr@monstr.eu>
11561 Date: Thu Aug 16 10:45:09 2007 +0200
11563 [FIX] Remove unused include file
11565 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
11566 Author: Stefan Roese <sr@denx.de>
11567 Date: Thu Aug 16 10:18:33 2007 +0200
11569 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
11571 Signed-off-by: Stefan Roese <sr@denx.de>
11573 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
11574 Author: Stefan Roese <sr@denx.de>
11575 Date: Thu Aug 16 09:54:51 2007 +0200
11577 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
11579 Signed-off-by: Stefan Roese <sr@denx.de>
11581 commit 02ba7022f62bb75908296c58c63866e1d294b69a
11582 Author: Stefan Roese <sr@denx.de>
11583 Date: Thu Aug 16 09:52:29 2007 +0200
11585 ppc4xx: Update Sequoia/Rainier bootstrap command
11587 As suggested by David Mitchell, here an update for the Sequoia/Rainier
11590 Signed-off-by: Stefan Roese <sr@denx.de>
11592 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
11593 Author: Kim Phillips <kim.phillips@freescale.com>
11594 Date: Wed Aug 15 22:30:39 2007 -0500
11596 mpc83xx: enable libfdt by default on freescale boards
11598 this enables libfdt code by default for the
11599 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
11600 mpc8349itx and gp boards.
11602 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11604 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
11605 Author: Kim Phillips <kim.phillips@freescale.com>
11606 Date: Wed Aug 15 22:30:33 2007 -0500
11608 mpc83xx: migrate remaining freescale boards to libfdt
11610 this adds libfdt support code for the freescale
11611 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
11614 Boards remain compatible with OF_FLAT_TREE.
11616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11618 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
11619 Author: Kim Phillips <kim.phillips@freescale.com>
11620 Date: Wed Aug 15 22:30:26 2007 -0500
11622 mpc83xx: move common /memory node update mechanism to cpu.c
11624 also adds common prototypes to include/common.h.
11626 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11628 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
11629 Author: Kim Phillips <kim.phillips@freescale.com>
11630 Date: Wed Aug 15 22:30:19 2007 -0500
11632 mpc83xx: remaining 8360 libfdt fixes
11634 PCI clocks and QE frequencies weren't being updated, and the core clock
11635 was being updated incorrectly. This patch also adds a /memory node if
11636 it doesn't already exist prior to update.
11638 plus some cosmetic trimming to single line comments.
11640 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11642 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
11643 Author: Kim Phillips <kim.phillips@freescale.com>
11644 Date: Wed Aug 15 22:30:12 2007 -0500
11646 mpc83xx: fix UEC2->1 typo in libfdt setup code
11648 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11650 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
11651 Author: Kim Phillips <kim.phillips@freescale.com>
11652 Date: Wed Aug 15 22:30:05 2007 -0500
11654 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
11656 and reorder the existing 83xx maintainers alpha.
11658 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11660 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
11661 Author: Michal Simek <monstr@monstr.eu>
11662 Date: Wed Aug 15 21:15:05 2007 +0200
11664 [FIX] Resolve problem with warnings
11665 microblaze toolchain don't support PRAGMA PACK.
11667 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
11668 Author: Michal Simek <monstr@monstr.eu>
11669 Date: Wed Aug 15 21:05:07 2007 +0200
11671 [FIX] Correction command setting for Microblaze boards
11673 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
11674 Author: Michal Simek <monstr@monstr.eu>
11675 Date: Wed Aug 15 21:03:41 2007 +0200
11677 [FIX] Correction command definition
11679 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
11680 Author: Jon Loeliger <jdl@freescale.com>
11681 Date: Wed Aug 15 11:55:35 2007 -0500
11683 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
11685 Remove a leftover in net/tftp.c while we're at it.
11687 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11689 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
11690 Author: Jon Loeliger <jdl@freescale.com>
11691 Date: Wed Aug 15 12:20:40 2007 -0500
11693 Move the MPC8641HPCN board under board/freescale.
11695 Minor path corrections needed to ensure buildability.
11697 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11699 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
11700 Author: Jon Loeliger <jdl@freescale.com>
11701 Date: Wed Aug 15 11:46:22 2007 -0500
11703 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
11705 Remove a leftover in net/tftp.c while we're at it.
11707 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11709 commit 210f463c71917b7a4495c2103c228b9c179ae64d
11710 Author: Jerry Van Baren <gvb.uboot@gmail.com>
11711 Date: Wed Aug 15 11:13:15 2007 -0400
11713 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
11715 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
11716 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
11717 when it should have gone inside of the conditional. As a result, it
11718 broke non-LIBFDT board builds.
11720 Also added a missing "not." to the comment.
11722 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11724 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
11725 Author: Niklaus Giger <niklaus.giger@netstal.com>
11726 Date: Wed Aug 15 12:14:23 2007 +0200
11728 PPC4xx:HCU4/5-Board fix compile warning
11730 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11732 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
11733 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11734 Date: Tue Aug 14 14:06:45 2007 -0500
11736 Fix malloc size error in ahci_init_one.
11738 Typically this causes scsi init to corrupt the
11739 devlist and break the coninfo command.
11740 Fix a compiler size warning.
11742 Signed-off-by: Jason Jin <jason.jin@freescale.com>
11743 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11744 Acked-by: Andy Fleming <afleming@freescale.com>
11746 commit b361acd64fd2525c081b9b288b0804efe209c0e9
11747 Author: ksi@koi8.net <ksi@koi8.net>
11748 Date: Tue Aug 14 10:02:16 2007 -0700
11750 TI DaVinci - fix unsupported %hhx format
11752 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
11754 commit f01dbb5424a81453c81190dd30e945891466f621
11755 Author: Wolfgang Denk <wd@denx.de>
11756 Date: Tue Aug 14 18:42:36 2007 +0200
11758 Coding style cleanup. Update CHANGELOG.
11760 Signed-off-by: Wolfgang Denk <wd@denx.de>
11762 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
11763 Author: Andy Fleming <afleming@freescale.com>
11764 Date: Tue Aug 14 10:32:59 2007 -0500
11766 Fix initrd/dtb interaction
11768 The original code would wrongly relocate the blob to be right before
11769 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
11770 if it is defined. So we make two changes:
11772 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
11774 2) If the blob is being relocated, relocate it before kbd, not initrd
11776 Signed-off-by: Andy Fleming <afleming@freescale.com>
11778 commit e54b970173769307a116bd34028b6d0c2eea2a4e
11779 Author: Peter Pearse <peter.pearse@arm.com>
11780 Date: Tue Aug 14 15:40:00 2007 +0100
11782 Supply spi interface in at45.c
11784 commit 4ce846ec59f36b85d6644a769690ad3feb667575
11785 Author: Stefan Roese <sr@denx.de>
11786 Date: Tue Aug 14 15:12:01 2007 +0200
11788 POST: Fix merge problem
11790 Signed-off-by: Stefan Roese <sr@denx.de>
11792 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
11793 Author: Stefan Roese <sr@denx.de>
11794 Date: Tue Aug 14 15:03:17 2007 +0200
11796 Coding style cleanup
11798 Signed-off-by: Stefan Roese <sr@denx.de>
11800 commit 779e975117a75e91fcebe226a63104dbfb924ab1
11801 Author: Stefan Roese <sr@denx.de>
11802 Date: Tue Aug 14 14:44:41 2007 +0200
11804 ppc4xx: Add initial Zeus (PPC405EP) board support
11806 Signed-off-by: Stefan Roese <sr@denx.de>
11808 commit c5a172a5fd636c12467429e3f7910e53773979c6
11809 Author: Stefan Roese <sr@denx.de>
11810 Date: Tue Aug 14 14:41:55 2007 +0200
11812 POST: Add option for external ethernet loopback test
11814 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
11815 is not done using an internal loopback connection, but by assuming
11816 that an external loopback connector is plugged into the board.
11818 Signed-off-by: Stefan Roese <sr@denx.de>
11820 commit eb2b4010ae426245172988804ee8d9193fb41038
11821 Author: Stefan Roese <sr@denx.de>
11822 Date: Tue Aug 14 14:39:44 2007 +0200
11824 POST: Add ppc405 support to cache and UART POST
11826 Signed-off-by: Stefan Roese <sr@denx.de>
11828 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
11829 Author: Peter Pearse <peter.pearse@arm.com>
11830 Date: Tue Aug 14 10:46:32 2007 +0100
11832 Replace lost end of at45.c.
11834 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
11835 Author: Peter Pearse <peter.pearse@arm.com>
11836 Date: Tue Aug 14 10:30:06 2007 +0100
11838 Update Makefiles for merged and split at45.c.
11840 commit 3454cece2db57cb9eb7087995f7e73066a163f71
11841 Author: Peter Pearse <peter.pearse@arm.com>
11842 Date: Tue Aug 14 10:21:06 2007 +0100
11844 Delete the merged files.
11846 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
11847 Author: Peter Pearse <peter.pearse@arm.com>
11848 Date: Tue Aug 14 10:14:05 2007 +0100
11852 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
11853 Author: Peter Pearse <peter.pearse@arm.com>
11854 Date: Tue Aug 14 10:10:52 2007 +0100
11856 Add MACH_TYPE records for several AT91 boards.
11857 Merge to two at45.c files into a common file, split to at45.c and spi.c
11858 Fix spelling error in DM9161 PHY Support.
11859 Initialize at91rm9200 board (and set LED).
11860 Add PIO control for at91rm9200dk LEDs and Mux.
11861 Change dataflash partition boundaries to be compatible with Linux 2.6.
11863 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
11864 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
11866 commit 4ef35e53c693556c54b0c22d6f873de87bade253
11867 Author: Wolfgang Denk <wd@denx.de>
11868 Date: Tue Aug 14 09:54:46 2007 +0200
11870 Coding style cleanup, update CHANGELOG
11872 Signed-off-by: Wolfgang Denk <wd@denx.de>
11874 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
11875 Author: Wolfgang Denk <wd@denx.de>
11876 Date: Tue Aug 14 09:47:27 2007 +0200
11878 Coding style cleanup; rebuild CHANGELOG
11880 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
11881 Author: Randy Vinson <rvinson@linuxbox.(none)>
11882 Date: Tue Feb 27 19:42:22 2007 -0700
11884 85xxCDS: Add make targets for legacy systems.
11886 The PCI ID select values on the Arcadia main board differ depending
11887 on the version of the hardware. The standard configuration supports
11888 Rev 3.1. The legacy target supports Rev 2.x.
11890 Signed-off-by Randy Vinson <rvinson@mvista.com>
11892 commit e41094c7e38177c755fbd9b182018069614f080d
11893 Author: Andy Fleming <afleming@freescale.com>
11894 Date: Tue Aug 14 01:50:09 2007 -0500
11896 85xxCDS: Enable the VIA PCI-to-ISA bridge.
11898 Author: Randy Vinson <rvinson@linuxbox.(none)>
11900 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
11901 Arcadia main board.
11903 Signed-off-by: Randy Vinson <rvinson@mvista.com>
11904 Signed-off-by: York Sun <yorksun@freescale.com>
11906 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
11907 Author: Andy Fleming <afleming@freescale.com>
11908 Date: Tue Aug 14 00:14:25 2007 -0500
11910 Add support for UEC to 8568
11912 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11913 Signed-off-by: Andy Fleming <afleming@freescale.com>
11915 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
11916 Author: Haiying Wang <Haiying.Wang@freescale.com>
11917 Date: Tue Jun 19 14:18:34 2007 -0400
11919 Add PCI support for MPC8568MDS board
11921 This patch is against u-boot-mpc85xx.git of www.denx.com
11923 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11924 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
11926 commit d111d6382c99fdea08c2312eeeae8786945e189a
11927 Author: Haiying Wang <Haiying.Wang@freescale.com>
11928 Date: Tue Jun 19 14:18:32 2007 -0400
11930 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
11932 This patch is against u-boot-mpc85xx.git of www.denx.com
11934 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
11935 both MPC8548CDS board and MPC8568MDS board, especially for supporting
11938 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
11939 DDR2 on all current board versions especially ver 1.92 or later to bring
11942 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11944 commit 3db0bef59eab1155801618cef5c481e97553b597
11945 Author: Kumar Gala <galak@kernel.crashing.org>
11946 Date: Tue Aug 7 18:07:27 2007 -0500
11948 Use an absolute address when jumping out of 4k boot page
11950 On e500 when we leave the 4k boot page we should use an absolute address since
11951 we don't know where the board code may want us to be really running at.
11953 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11955 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
11956 Author: Andy Fleming <afleming@freescale.com>
11957 Date: Mon Aug 13 14:49:59 2007 -0500
11959 MPC85xx BA bits not set for 3-bit bank address DIMM
11961 The current implementation does not set the number of bank address bits
11962 (BA) in the processor. The default assumes 2 logical bank bits. This
11963 works fine for a DIMM that uses devices with 4 internal banks (SPD
11964 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
11965 devices with 8 internal banks (SPD byte17 = 0x8).
11967 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
11969 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
11970 Author: Andy Fleming <afleming@freescale.com>
11971 Date: Mon Aug 13 14:38:06 2007 -0500
11973 Fix minor 85xx warnings
11975 Some patches had inserted warnings into the build:
11976 * mpc8560ads declared data without using it
11977 * cpu_init declared ecm and immap without using it in all CONFIGs
11978 * MPC8548CDS.h had its default filenames changed so that they contained
11979 "\m" in the paths. Made the defaults not Windows-specific (or
11982 Signed-off-by: Andy Fleming <afleming@freescale.com>
11984 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
11985 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11986 Date: Fri Jul 27 01:50:52 2007 -0500
11988 8548cds PCIE support.
11990 Make the early L1 cache stack region guarded to prevent speculative
11991 fetches outside the locked range.
11993 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
11994 init.S whitespace cleanup.
11996 Allow TEXT_BASE value to be specified on command line. This allows it
11997 to be set to 0xfffc0000 which cuts the uboot binary in half.
11999 Clear and enable lbc and ecm errors.
12001 Update last_busno in device-tree for pci and pcie.
12003 Remove load of obsolete cpu/mpc85xx/pci.0
12005 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12006 Acked-by: Andy Fleming <afleming@freescale.com>
12008 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
12009 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12010 Date: Fri Jul 27 01:50:51 2007 -0500
12012 8544ds PCIE support
12014 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
12016 Enable LBC and ECM errors and clear error registers.
12018 Add tftpflash env var to get uboot from tftp server and flash it.
12020 Add pci/pcie convenience env vars to display register space:
12021 "run pcie3regs" to see all pcie3 ccsr registers
12022 "run pcie3cfg" to see all cfg registers
12023 Whitespace cleanup and MPC8544DS.h
12025 Enable CONFIG_INTERRUPTS.
12027 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12028 Acked-by: Andy Fleming <afleming@freescale.com>
12030 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
12031 Author: Andy Fleming <afleming@freescale.com>
12032 Date: Tue Aug 14 01:34:21 2007 -0500
12034 85xx start.S cleanup and exception support
12036 From: Ed Swarthout <Ed.Swarthout@freescale.com>
12038 Support external interrupts from platform to eliminate system hangs.
12039 Define CONFIG_INTERRUPTS board configure option to enable.
12040 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
12042 Remove extra cpu initialization redundant with hardware initialization.
12043 Whitespace cleanup.
12045 Define and use _START_OFFSET consistent with other processors using
12048 Move additional code from .text to boot page to make room for
12049 exception vectors at start of image.
12051 Handle Machine Check, External and Critical exceptions.
12053 Fix e500 machine check error determination in traps.c
12055 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
12057 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12058 Acked-by: Andy Fleming <afleming@freescale.com>
12060 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
12061 Author: Andy Fleming <afleming@freescale.com>
12062 Date: Tue Aug 14 01:33:18 2007 -0500
12064 Add MPC8544DS README
12066 Signed-off-by: Andy Fleming <afleming@freescale.com>
12068 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
12069 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12070 Date: Fri Jul 27 01:50:48 2007 -0500
12072 85xx allow debugger to configure ddr.
12074 Only check for mpc8548 rev 1 when compiled for 8548.
12076 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12077 Acked-by: Andy Fleming <afleming@freescale.com>
12079 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
12080 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12081 Date: Fri Jul 27 01:50:47 2007 -0500
12083 mpc85xx L2 cache reporting and SRAM relocation option.
12085 Allow debugger to override flash cs0/cs1 settings to enable alternate
12088 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12089 Acked-by: Andy Fleming <afleming@freescale.com>
12091 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
12092 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12093 Date: Fri Jul 27 01:50:46 2007 -0500
12095 e500 needs ppc_asm.tmp MCK_EXCEPTION
12097 Always define MCK_EXCEPTION macro - so e500 can use it too.
12099 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12100 Acked-by: Andy Fleming <afleming@freescale.com>
12102 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
12103 Author: David Updegraff <dave@cray.com>
12104 Date: Mon Jun 11 10:41:07 2007 -0500
12106 multicast tftp: RFC2090
12108 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
12109 on Realtek RTL8139 and Freescale TSEC.
12111 Signed-off-by: David Updegraff <dave@cray.com>
12112 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12114 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
12115 Author: Wilson Callan <wcallan@savantav.com>
12116 Date: Sat Jul 28 10:56:13 2007 -0400
12118 New CONFIG_BOOTP_SERVERIP option
12120 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
12121 from the bootp server
12123 Signed-off-by: Wilson Callan <wcallan@savantav.com>
12124 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12126 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
12127 Author: Mike Rapoport <mike@compulab.co.il>
12128 Date: Sun Aug 12 08:48:27 2007 +0300
12130 Add ability to take MAC address from the environment to DM9000 driver
12132 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
12133 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12135 commit be5d72d10d47609326226225181e301fb9a33b58
12136 Author: Wolfgang Denk <wd@denx.de>
12137 Date: Mon Aug 13 21:57:53 2007 +0200
12139 Minor coding style cleanup. Update CHANGELOG.
12141 Signed-off-by: Wolfgang Denk <wd@denx.de>
12143 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
12144 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12145 Date: Sat Aug 11 06:54:58 2007 -0500
12147 Modify SBC8641D to use new Freescale PCI routines
12149 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
12152 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12153 Signde-off-by: Jon Loeliger <jdl@freescale.com>
12155 commit a08458303e7f9db67f296980036d3292c35cb45c
12156 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12157 Date: Fri Jun 29 18:38:51 2007 +0200
12159 atmel_mci: Fix data timeout value
12161 Calculate the data timeout based on values from the CSD instead of
12162 just using a hardcoded DTOR value. This is a backport of a similar fix
12163 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
12166 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12168 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
12169 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12170 Date: Mon Aug 13 17:22:31 2007 +0200
12172 AVR32: Include <div64.h> instead of <asm/div64.h>
12174 include/asm-avr32/div64.h was recently moved to include/div64.h, but
12175 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
12176 the patch was merged perhaps?)
12178 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
12181 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12183 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
12184 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12185 Date: Wed Jun 27 13:34:26 2007 +0200
12187 atmel_mci: Use 512 byte blocksize if possible
12189 Instead of always using the largest blocksize the card supports, check
12190 if it can support smaller block sizes and use 512 bytes if possible.
12191 Most cards do support this, and other parts of u-boot seem to have
12192 trouble with block sizes different from 512 bytes.
12194 Also enable underrun/overrun protection.
12196 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12197 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
12199 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
12200 Author: Stefan Roese <sr@denx.de>
12201 Date: Mon Aug 13 09:05:33 2007 +0200
12203 ppc4xx: Fix problem in PLL clock calculation
12205 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
12206 and fixes a bug in the PLL clock calculation.
12208 Signed-off-by: Stefan Roese <sr@denx.de>
12210 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
12211 Author: Wolfgang Denk <wd@denx.de>
12212 Date: Sun Aug 12 21:34:50 2007 +0200
12216 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
12217 Author: Wolfgang Denk <wd@denx.de>
12218 Date: Sun Aug 12 21:34:34 2007 +0200
12220 Minor alignment of output, 2nd try.
12221 Also update CHANGELOG
12223 Signed-off-by: Wolfgang Denk <wd@denx.de>
12225 commit 6b309f22a724fad8418e811751a0741b893419cf
12226 Author: Wolfgang Denk <wd@denx.de>
12227 Date: Sun Aug 12 20:35:49 2007 +0200
12229 Minor alignment of output
12231 Signed-off-by: Wolfgang Denk <wd@denx.de>
12233 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
12234 Author: Wolfgang Denk <wd@denx.de>
12235 Date: Sun Aug 12 18:28:18 2007 +0200
12237 Cleanup output on ADS5121 board
12239 Signed-off-by: Wolfgang Denk
12241 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
12242 Author: Wolfgang Denk <wd@denx.de>
12243 Date: Sun Aug 12 15:11:38 2007 +0200
12245 Adapt board configuration and fix kernel crash on MCC200 board.
12247 The update procedure was modified to turn off the USB subsystem
12248 before exit for MCC200 and TRAB. This is necessary as otherwise the
12249 USB controller continues to write periodically to system memory!
12251 MCC200-specific notes:
12252 - the patch disables the magic key check for MCC200
12253 - the patch contains the configuration changes made
12254 for the new revision of the board.
12256 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12257 Signed-off-by: Wolfgang Denk <wd@denx.de>
12259 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
12260 Author: Wolfgang Denk <wd@denx.de>
12261 Date: Sun Aug 12 14:47:54 2007 +0200
12263 Adjust default configuration of ADS5121 board.
12265 Signed-off-by: Wolfgang Denk <wd@denx.de>
12267 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
12268 Author: Wolfgang Denk <wd@denx.de>
12269 Date: Sun Aug 12 14:27:39 2007 +0200
12271 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
12273 Signed-off-by: Wolfgang Denk <wd@denx.de>
12275 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
12276 Author: Gerald Van Baren <vanbaren@cideas.com>
12277 Date: Tue Aug 7 21:14:22 2007 -0400
12279 Improve error print messages.
12281 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12283 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
12284 Author: Kim Phillips <kim.phillips@freescale.com>
12285 Date: Tue Jul 17 13:57:04 2007 -0500
12287 fdt: allow for builds that don't want env and bd_t nodes
12289 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
12292 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12294 commit 91148bf7aeba142d6f348805db7625db7da64d6f
12295 Author: Kim Phillips <kim.phillips@freescale.com>
12296 Date: Tue Jul 17 13:56:53 2007 -0500
12298 fdt: do board setup based on fdt address specified on bootm line
12300 The last fdt patch to bootm did board setup based on the address
12301 specified by a prior fdt address command invocation. The bootm
12302 code, as its call to fdt_chosen does, should use the fdt specified
12303 by the user on the bootm command. Note this restores full
12304 functionality for the 8360's existing default boot environment
12305 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
12306 before booting a kernel).
12308 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12310 commit e125a2ffc209dd34794e326c7175658253beadf3
12311 Author: Gerald Van Baren <vanbaren@cideas.com>
12312 Date: Tue Jul 10 20:40:39 2007 -0400
12314 Call ft_board_setup() from the bootm command.
12316 In the patch titled "Create new fdt boardsetup command..." I removed the
12317 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
12318 to add a direct call back into cmd_bootm.c
12320 This fixes the oversight by adding the direct call to the bootm command.
12322 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12324 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
12325 Author: Gerald Van Baren <vanbaren@cideas.com>
12326 Date: Mon Jun 25 23:25:28 2007 -0400
12328 Create new fdt boardsetup command, fix bug parsing [] form of set values.
12330 Previously ft_board_setup() was called by fdt_chosen() which was not
12331 really correctly structured. This splits ft_board_setup() out by creating
12332 a new fdt boardsetup command.
12334 Fix a bug when parsing fdt set command values which have the square
12335 bracket form [00 11 22 33] - the length was updated incorrectly in when
12338 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12340 commit 6f35ded9e85493595e0eb66a82b502a95326d049
12341 Author: Gerald Van Baren <vanbaren@cideas.com>
12342 Date: Mon Jun 25 20:55:58 2007 -0400
12344 Tighten up the error messages.
12346 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12348 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
12349 Author: Gerald Van Baren <vanbaren@cideas.com>
12350 Date: Mon Jun 25 19:52:23 2007 -0400
12352 Asthetic improvements: error messages and line lengths.
12354 Tighten up the error messages, split overlength lines.
12356 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12358 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
12359 Author: Gerald Van Baren <vanbaren@cideas.com>
12360 Date: Fri May 25 22:08:57 2007 -0400
12362 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
12364 The fdt_chosen() function was adding/seting some properties ad-hoc
12365 improperly and duplicated (poorly) what was done in ft_board_setup()
12367 Clean up long lines (setting properties, printing errors).
12369 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12371 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
12372 Author: Gerald Van Baren <vanbaren@cideas.com>
12373 Date: Mon May 21 23:27:16 2007 -0400
12375 For fdt_find_node_by_path(), handle the root path properly.
12377 Also removes the special case root path detection in cmd_fdt.c since it
12378 is no longer necessary.
12380 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12382 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
12383 Author: Gerald Van Baren <vanbaren@cideas.com>
12384 Date: Thu May 17 23:54:36 2007 -0400
12386 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
12388 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12389 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12391 commit 1a861169bc3758f9de3aead62b058736c6891246
12392 Author: Gerald Van Baren <vanbaren@cideas.com>
12393 Date: Wed Jun 6 22:47:58 2007 -0400
12395 Replace fdt_node_offset() with fdt_find_node_by_path().
12397 The new name matches more closely the kernel's name, which is also
12398 a much better description.
12400 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12401 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12403 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
12404 Author: Gerald Van Baren <vanbaren@cideas.com>
12405 Date: Wed May 16 22:39:59 2007 -0400
12407 Fix cmd_fdt line lengths, refactor code.
12409 Break lines that were greater than 80 characters in length.
12410 Move the fdt print and property parsing code to separate static functions
12411 to reduce coding clutter in the fdt_cmd handling body.
12413 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12415 commit 25114033ab21788810c48ba4df103b649da1223b
12416 Author: Gerald Van Baren <vanbaren@cideas.com>
12417 Date: Sat May 12 09:47:25 2007 -0400
12419 FDT command improvements.
12421 Fix "fdt set" so that it will create a non-existing property.
12422 Add "fdt mknode" to create nodes.
12424 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12426 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
12427 Author: Gerald Van Baren <vanbaren@cideas.com>
12428 Date: Sat May 12 09:45:46 2007 -0400
12430 Reorganize and fix problems (returns) in the bootm command.
12432 Do *NOT* return after the "point of no return" has been passed.
12433 If something goes wrong, the board must be reset after that point.
12434 Move the "Transferring control to Linux" debug message back to where it
12435 belongs: just before transferring control to linux.
12437 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12439 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
12440 Author: Gerald Van Baren <vanbaren@cideas.com>
12441 Date: Tue May 8 21:27:35 2007 -0400
12443 Fix bugs in the CONFIG_OF_LIBFDT
12445 Stupid coding mistakes (identified by Timur Tabi, thanks).
12447 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12449 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
12450 Author: Gerald Van Baren <vanbaren@cideas.com>
12451 Date: Wed Apr 25 22:47:15 2007 -0400
12453 Improve fdt move length handling.
12455 Make the length parameter optional: if not specified, do the move using
12456 the current size unchanged.
12458 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12460 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
12461 Author: Gerald Van Baren <vanbaren@cideas.com>
12462 Date: Wed Apr 25 22:23:36 2007 -0400
12464 Minor code clean up.
12466 Declare the variable fdt properly as extern.
12467 Call the "set_fn" function pointer the "short way" without the full
12468 dereferencing syntax.
12470 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12472 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
12473 Author: Gerald Van Baren <vanbaren@cideas.com>
12474 Date: Wed Apr 25 21:24:27 2007 -0400
12476 Improve error messages, more informative.
12478 Print more than the raw libfdt error message strings. This is especially
12479 useful for cluing in the user when the bootm command aborts due to
12482 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12484 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
12485 Author: Gerald Van Baren <vanbaren@cideas.com>
12486 Date: Fri Apr 20 22:46:53 2007 -0400
12488 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
12490 This is the way u-boot reduces configured-out code. At Wolfgang
12491 Grandegger and Wolfgang Denk's request, make libfdt conform.
12493 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12495 commit 923efd286411ed052d9e074f59f8986d6081061c
12496 Author: Bruce Adler <bruce.adler@ccpu.com>
12497 Date: Fri Aug 10 14:54:47 2007 -0700
12499 add image size and descriptors for Spartan 3E FPGA chips
12501 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
12503 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
12505 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
12506 Author: Kim Phillips <kim.phillips@freescale.com>
12507 Date: Fri Aug 10 15:34:48 2007 -0500
12509 make MAKEALL more immune to merge conflicts
12511 ..by placing board entries one per line, as suggested by jdl.
12513 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12515 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
12516 Author: Kim Phillips <kim.phillips@freescale.com>
12517 Date: Fri Aug 10 13:28:25 2007 -0500
12519 README: Remove outdated cpu type, board type, and NAME_config lists
12521 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12523 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
12524 Author: Dave Liu <r63238@freescale.com>
12525 Date: Fri Aug 10 15:48:59 2007 +0800
12527 mpc83xx: Suppress the warning 'burstlen'
12529 suppress the warning 'burstlen' of spd_sdram.
12531 Signed-off-by: Dave Liu <daveliu@freescale.com>
12533 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
12534 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12535 Date: Thu Aug 9 15:11:03 2007 -0500
12537 Add support for SBC8641D. Config files.
12539 Add support for Wind River's SBC8641D reference board.
12541 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12542 Acked-by: Wolfgang Denk <wd@denx.de>
12543 Acked-by: Jon Loeliger <jdl@freescale.com>
12545 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
12546 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12547 Date: Thu Aug 9 15:10:53 2007 -0500
12549 Add support for SBC8641D. Board files.
12551 Add support for Wind River's SBC8641D reference board.
12553 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12554 Acked-by: Wolfgang Denk <wd@denx.de>
12555 Acked-by: Jon Loeliger <jdl@freescale.com>
12557 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
12558 Author: Stefan Roese <sr@denx.de>
12559 Date: Fri Aug 10 20:34:58 2007 +0200
12561 Conding style cleanup
12563 Signed-off-by: Stefan Roese <sr@denx.de>
12565 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
12566 Author: Sergey Kubushyn <ksi@koi8.net>
12567 Date: Fri Aug 10 20:26:18 2007 +0200
12569 [ARM] TI DaVinci support, hopefully final
12571 Add support for the following DaVinci boards:
12578 - Split into separate board directories
12579 - Removed changes to MTD_DEBUG (or whatever it's called)
12580 - New CONFIG_CMD party line followed
12581 - Some cosmetic fixes, cleanup etc.
12582 - Patches against the latest U-Boot tree as of now.
12583 - Fixed CONFIG_CMD_NET in net files.
12584 - Fixed CONFIG_CMD_EEPROM for schmoogie.
12585 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
12586 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
12587 but it at least compiles.
12589 Here is an excerpt from session log on SCHMOOGIE...
12591 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
12600 ETH PHY : DP83848 @ 0x01
12602 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
12603 U-Boot > ping 192.168.253.10
12604 host 192.168.253.10 is alive
12607 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
12608 Acked-by: Dirk Behme <dirk.behme@gmail.com>
12609 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
12610 Acked-by: Stefan Roese <sr@denx.de>
12612 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
12613 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12614 Date: Fri Jul 27 01:50:45 2007 -0500
12616 fsl_pci_init cleanup.
12618 Do not enable normal errors created during probe (master abort, perr,
12619 and pcie Invalid Configuration access).
12621 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
12623 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12624 Acked-by: Andy Fleming <afleming@freescale.com>
12626 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
12627 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12628 Date: Fri Jul 27 01:50:44 2007 -0500
12630 pciauto_setup_device bars_num fix
12632 Passing bars_num=0 to pciauto_setup_device should assign no bars.
12634 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12635 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
12636 Acked-by: Andy Fleming <afleming@freescale.com>
12638 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
12639 Author: Jon Loeliger <jdl@freescale.com>
12640 Date: Mon Aug 6 17:39:44 2007 -0500
12642 8641hpcn: Do correct sized pointer math.
12644 When I rebased Ed's patch and cleaned up a few compilation
12645 problems, I apparently rebased my brain on crack first.
12646 Fix that by doing (char *) sized pointer math as needed.
12648 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12650 commit cfc7a7f5bb3273c9951173c788001d45118f141f
12651 Author: Jon Loeliger <jdl@freescale.com>
12652 Date: Thu Aug 2 14:42:20 2007 -0500
12656 Remove rev 1 fixes.
12657 Always set PICGCR_MODE.
12658 Enable machine check and provide board config option
12659 to set and handle SoC error interrupts.
12661 Include MSSSR0 in error message.
12663 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
12665 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12666 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12668 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
12669 Author: Stefan Roese <sr@denx.de>
12670 Date: Fri Aug 10 10:42:25 2007 +0200
12672 Coding style cleanup
12674 Signed-off-by: Stefan Roese <sr@denx.de>
12676 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
12677 Author: Dirk Behme <dirk.behme@googlemail.com>
12678 Date: Thu Aug 2 17:42:08 2007 +0200
12680 Make use of generic 64bit division in nand_util.c
12682 Use generic 64bit division in nand_util.c. This makes nand_util.c
12683 independent of any toolchain 64bit division.
12685 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
12687 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
12688 Author: Dirk Behme <dirk.behme@googlemail.com>
12689 Date: Thu Aug 2 17:41:14 2007 +0200
12691 Move 64bit division from avr32 to generic lib
12693 Move the 64bit division from lib_avr32 to lib_generic. With this, all
12694 boards can do_div/__div64_32 if needed, not only avr one. Code is put
12695 to lib_generic, so no larger memory footprint if not used. No code
12696 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
12698 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
12700 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
12701 Author: Niklaus Giger <niklausgiger@gmx.ch>
12702 Date: Fri Jul 27 11:31:22 2007 +0200
12704 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
12706 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12708 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
12709 Author: Niklaus Giger <niklausgiger@gmx.ch>
12710 Date: Fri Jul 27 11:30:33 2007 +0200
12712 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
12714 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12716 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
12717 Author: Niklaus Giger <niklausgiger@gmx.ch>
12718 Date: Fri Jul 27 11:38:26 2007 +0200
12720 Add PPC4xx-HCU4 and HCU5 boards: common files
12722 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12724 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
12725 Author: Niklaus Giger <niklausgiger@gmx.ch>
12726 Date: Fri Jul 27 11:28:44 2007 +0200
12728 Add PPC4xx-HCU4 and HCU5 boards: make related
12730 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12732 commit 137fdd9f474ecb853efdace5200576308c67f18d
12733 Author: Niklaus Giger <niklausgiger@gmx.ch>
12734 Date: Fri Jul 27 11:28:03 2007 +0200
12736 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
12738 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12740 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
12741 Author: Niklaus Giger <niklausgiger@gmx.ch>
12742 Date: Fri Jul 27 11:27:15 2007 +0200
12744 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
12746 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12748 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
12749 Author: Niklaus Giger <niklausgiger@gmx.ch>
12750 Date: Fri Jul 27 11:25:31 2007 +0200
12752 Add PPC4xx-HCU4 and HCU5 boards: READMEs
12754 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12756 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
12757 Author: Niklaus Giger <niklausgiger@gmx.ch>
12758 Date: Fri Jul 27 11:37:40 2007 +0200
12760 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
12762 This series of patches adds support for 2 boards from Netstal Maschinen.
12764 The HCU4 has a PPC405Gpr and
12765 the HCU5 has a PPC440EPX.
12767 The HCU4 has a somehow complicated flash setup, as the booteprom is
12768 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
12771 The HCU5 has only a booteprom as the whole code will be downloaded from a
12772 different board which has HD, CD-ROM, etc and where all code is stored.
12774 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
12777 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12779 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
12780 Author: Stefan Roese <sr@denx.de>
12781 Date: Fri Aug 10 08:42:55 2007 +0200
12783 ppc4xx: Update lwmon5 POST configuration
12785 Signed-off-by: Stefan Roese <sr@denx.de>
12787 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
12788 Author: Yuri Tikhonov <yur@emcraft.com>
12789 Date: Fri Aug 10 08:25:22 2007 +0200
12791 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
12793 The patch adds support for UART POST on ppc44x-based boards with no
12794 external serial clocks installed.
12796 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12797 Acked-by: Stefan Roese <sr@denx.de>
12799 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
12800 Author: Kim Phillips <kim.phillips@freescale.com>
12801 Date: Mon Aug 6 18:18:34 2007 -0500
12803 mpc83xx: fix ITX[GP] O=builddir builds
12805 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
12807 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
12808 "BUILD_DIR=<some dir> ./MAKEALL ..."
12810 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12812 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
12813 Author: Dave Liu <r63238@freescale.com>
12814 Date: Wed Aug 1 15:00:59 2007 +0800
12816 mpc83xx: Correct the README for DDR ECC
12818 Update the README for DDR ECC, change the name
12819 to README.mpc83xx.ddrecc.
12821 Signed-off-by: Dave Liu <daveliu@freescale.com>
12822 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12824 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
12825 Author: Dave Liu <r63238@freescale.com>
12826 Date: Wed Aug 1 15:00:15 2007 +0800
12828 mpc83xx: Consolidate the ECC support of 83xx
12830 Remove the duplicated source code of ecc command on the <board>.c,
12831 for reused, move these code to cpu/mpc83xx directory.
12833 Signed-off-by: Dave Liu <daveliu@freescale.com>
12834 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12836 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
12837 Author: Dave Liu <r63238@freescale.com>
12838 Date: Sat Aug 4 13:37:39 2007 +0800
12840 mpc83xx: Correct the burst length for DDR2 with 32 bits
12842 The burst length should be 4 for DDR2 with 32 bits bus
12844 Signed-off-by: Dave Liu <daveliu@freescale.com>
12846 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
12847 Author: Kim Phillips <kim.phillips@freescale.com>
12848 Date: Wed Jul 25 19:25:33 2007 -0500
12850 mpc83xx: add support for the MPC8323E RDB
12852 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
12853 five 10/100 ethernet ports connected via an ICPlus IP175C
12854 switch, one PCI slot, and serial. Features not supported
12855 in this patch are SD card interface, 2 USB ports, and the
12858 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
12859 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12861 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
12862 Author: Kim Phillips <kim.phillips@freescale.com>
12863 Date: Wed Jul 25 19:25:28 2007 -0500
12865 mpc83xx: fixup generic pci for libfdt
12867 add libfdt support to the generic 83xx pci code
12869 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12871 commit f57ac7a7b37109245b69db80839ebee26179966a
12872 Author: Kim Phillips <kim.phillips@freescale.com>
12873 Date: Wed Jul 25 19:25:22 2007 -0500
12875 mpc83xx: fix 8360 and cpu functions to update fdt being passed
12877 ..and not the global fdt. Rename local fdt vars to blob so as not to
12878 be confused with the global var with the same three-letter name.
12880 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12882 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
12883 Author: Jerry Van Baren <gvb.uboot@gmail.com>
12884 Date: Wed Jul 4 21:34:24 2007 -0400
12886 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
12888 Several node strings were not correct (trailing slashes and properties
12890 Added setting of the timebase-frequency.
12891 Improved error messages and use debug() instead of printf().
12893 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
12894 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12896 commit 26d02c9bbac1751c5e19294f000100b48d43a920
12897 Author: Jerry Van Baren <gvb.uboot@gmail.com>
12898 Date: Wed Jul 4 21:27:30 2007 -0400
12900 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
12902 The new name matches more closely the kernel's name, which is also
12903 a much better description.
12905 These are the mpc83xx changes made necessary by the function name change.
12907 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
12908 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12909 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12911 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
12912 Author: Dave Liu <daveliu@freescale.com>
12913 Date: Mon Jun 25 10:41:56 2007 +0800
12915 mpc83xx: Add support for the display of reset status
12917 83xx processor family has many reset sources, such as
12918 power on reset, software hard reset, software soft reset,
12919 JTAG, bus monitor, software watchdog, check stop reset,
12920 external hard reset, external software reset.
12921 sometimes, to figure out the fault of system, we need to
12922 know the cause of reset early before the prompt of
12925 Signed-off-by: Dave Liu <daveliu@freescale.com>
12926 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12928 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
12929 Author: Dave Liu <daveliu@freescale.com>
12930 Date: Mon Jun 25 10:41:04 2007 +0800
12932 mpc83xx: Fix the align bug of SDMA buffer
12934 According to the latest user manual, the SDMA temporary
12935 buffer base address must be 4KB aligned.
12937 Signed-off-by: Dave Liu <daveliu@freescale.com>
12938 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12940 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
12941 Author: Dave Liu <daveliu@freescale.com>
12942 Date: Mon Jun 25 13:21:12 2007 +0800
12944 mpc83xx: Revise the MPC8360EMDS readme doc
12946 When the rev2.x silicon mount on the MPC8360EMDS baord,
12947 and if you are using the u-boot version after the commit
12948 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
12949 to make the ethernet interface usable, we have to setup
12950 the jumpers correctly.
12952 Signed-off-by: Dave Liu <daveliu@freescale.com>
12953 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12955 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
12956 Author: Timur Tabi <timur@freescale.com>
12957 Date: Tue Jul 3 13:46:32 2007 -0500
12959 FSL I2C driver programs the two I2C busses differently
12961 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
12962 The second I2C bus has its slave address programmed incorrectly and is
12963 missing a 5-us delay.
12965 Signed-off-by: Timur Tabi <timur@freescale.com>
12966 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12968 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
12969 Author: Timur Tabi <timur@freescale.com>
12970 Date: Tue Jul 3 13:04:34 2007 -0500
12972 Update SCCR programming in cpu_init_f() to support all 83xx processors
12974 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
12975 bitfields for all 83xx processors. The code to update some bitfields was
12976 compiled only on some processors. Now, the bitfields are programmed as long
12977 as the corresponding CFG_SCCR option is defined in the board header file.
12978 This means that the board header file should not define any CFG_SCCR macros
12979 for bitfields that don't exist on that processor, otherwise the SCCR will be
12980 programmed incorrectly.
12982 Signed-off-by: Timur Tabi <timur@freescale.com>
12983 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12985 commit 9546266999f0b9b51372636614211b88d90f0f25
12986 Author: Martin Krause <martin.krause@tqs.de>
12987 Date: Fri Jun 22 13:04:22 2007 +0200
12989 TQM834x: cleanup configuraton
12991 Remove irritating #undef DEBUG
12993 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12994 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12996 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
12997 Author: david.saada <David.Saada@ecitele.com>
12998 Date: Mon Jun 18 09:09:53 2007 -0700
13000 MPC83xx: Fix makefile to generate config.h file in the build directory
13002 MPC83xx: Fix the Makefile config sections to generate the include/config.h
13003 file in the build directory instead of the source directory.
13005 Signed-off-by: David Saada <david.saada@ecitele.com>
13006 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13008 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
13009 Author: Lee Nipper <Lee.Nipper@freescale.com>
13010 Date: Thu Jun 14 20:07:33 2007 -0500
13012 mpc83xx: Add support for 8360 silicon revision 2.1
13014 This change adds 8360 silicon revision 2.1 support to u-boot.
13016 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
13017 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13019 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
13020 Author: Kumar Gala <galak@kernel.crashing.org>
13021 Date: Wed Aug 8 04:14:28 2007 -0500
13023 Treat ppc64 host as ppc
13025 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13027 commit 0dc4279b08ff82472bec2e2c90858602459febe8
13028 Author: Jason Jin <Jason.jin@freescale.com>
13029 Date: Wed Aug 8 09:01:46 2007 +0800
13031 Minor fix for bios emulator makefile
13033 Add $(obj) to LIB avoiding objects be built in the source dir
13035 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13037 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
13038 Author: Jason Jin <Jason.jin@freescale.com>
13039 Date: Wed Aug 8 08:33:11 2007 +0800
13041 Add CONFIG_BIOSEMU define to guard all the bios emulator code
13043 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13045 This patch fix the compile issue on the board that did not enable the bios emulator
13047 commit ed8106433522f2ea8933e9808346860d061d7731
13048 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
13049 Date: Tue Jul 31 12:27:25 2007 -0500
13051 tsec: fix multiple PHY support
13053 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
13054 broke multiple PHY support in tsec.c. This fixes it.
13056 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
13057 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13059 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
13060 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
13061 Date: Thu Aug 9 09:08:18 2007 -0500
13063 tsec: Allow Ten Bit Interface address to be configurable
13065 Allow the address of the Ten Bit Interface (TBI) to be changed in the
13066 event of a conflict with another device.
13068 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
13070 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
13071 Author: Stefan Roese <sr@denx.de>
13072 Date: Wed Aug 8 09:54:26 2007 +0200
13074 Coding style cleanup
13076 Signed-off-by: Stefan Roese <sr@denx.de>
13078 commit a41de1f0d373e09c782dea558385a06247111ba5
13079 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13080 Date: Sun Aug 5 05:15:18 2007 -0500
13082 Port enabled for I2C signals and chipselects port configuration.
13084 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13086 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
13087 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13088 Date: Sun Aug 5 04:31:18 2007 -0500
13092 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13094 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
13095 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13096 Date: Sun Aug 5 04:11:20 2007 -0500
13100 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13102 commit 99c03c175d2689093176facf17c58ce2cb320001
13103 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13104 Date: Sun Aug 5 03:58:52 2007 -0500
13106 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
13108 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13110 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
13111 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13112 Date: Sun Aug 5 03:55:21 2007 -0500
13114 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
13116 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13118 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
13119 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13120 Date: Sun Aug 5 03:43:30 2007 -0500
13122 Moved sync() from board file to include/asm-m68k/io.h
13124 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13126 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
13127 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13128 Date: Sun Aug 5 03:30:44 2007 -0500
13130 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
13132 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13134 commit 9998bd37ead85e93953559720710d3b0685c81e6
13135 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13136 Date: Sun Aug 5 03:19:10 2007 -0500
13138 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
13140 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13142 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
13143 Author: Jason Jin <Jason.jin@freescale.com>
13144 Date: Tue Aug 7 16:17:06 2007 +0800
13146 Add CONFIG_BIOSEMU define to guard all the bios emulator code
13148 This patch fix the compile issue on the board that did not enable the bios emulator
13150 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
13151 Author: Wolfgang Denk <wd@denx.de>
13152 Date: Tue Aug 7 16:02:13 2007 +0200
13154 Fix missing brace error in fs/fat/fat.c
13155 [pointed out by Roderik Wildenburg]
13157 Signed-off-by: Wolfgang Denk <wd@denx.de>
13159 commit 706714d97a0d08d59eda4de2268c39f504688329
13160 Author: Michal Simek <monstr@monstr.eu>
13161 Date: Mon Aug 6 23:41:53 2007 +0200
13163 [FIX] remove cute code
13165 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
13166 Author: Michal Simek <monstr@monstr.eu>
13167 Date: Mon Aug 6 23:35:26 2007 +0200
13169 [FIX] Fix romfs code
13171 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
13172 Author: Michal Simek <monstr@monstr.eu>
13173 Date: Mon Aug 6 23:31:49 2007 +0200
13175 [FIX] Coding style cleanup - Wolfgang's suggestions
13177 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
13178 Author: Wolfgang Denk <wd@denx.de>
13179 Date: Mon Aug 6 23:21:05 2007 +0200
13181 Fixed typo in README (pointed out by Martin Jost).
13183 Signed-off-by: Wolfgang Denk <wd@denx.de>
13185 commit 537223afa61f64480df31ce440a9cb386df4a814
13186 Author: Stefan Roese <sr@denx.de>
13187 Date: Mon Aug 6 21:10:17 2007 +0200
13189 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
13191 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
13192 here an updated Bamboo README.
13194 Signed-off-by: Stefan Roese <sr@denx.de>
13196 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
13197 Author: Wolfgang Denk <wd@denx.de>
13198 Date: Mon Aug 6 02:17:36 2007 +0200
13200 Coding style cleanup. Update CHANGELOG.
13202 Signed-off-by: Wolfgang Denk <wd@denx.de>
13204 commit 221838cc7eb178370ff62aa05920a582e12ac322
13205 Author: Jason Jin <Jason.jin@freescale.com>
13206 Date: Tue Jul 10 09:03:22 2007 +0800
13208 Remove the bios emulator from MAI board.
13210 The bios emulator in the MAI board can not pass compile
13211 and have a lot of crap in it. remove it and will have a
13212 clean and small bios emulator in the drivers directory
13213 which can be uesed for every board.
13215 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13217 commit 5618332409bb96f4448d1712899369fc80c0b489
13218 Author: Jason Jin <Jason.jin@freescale.com>
13219 Date: Fri Jul 13 12:14:59 2007 +0800
13221 Fix some compile issues for MAI board.
13223 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13225 commit 0f460a1ee148b648ee242c3157650287d4296260
13226 Author: Jason Jin <Jason.jin@freescale.com>
13227 Date: Fri Jul 13 12:14:58 2007 +0800
13229 Configurations for ATI video card BIOS emulator
13231 This patch add definition of the BIOS emulator and the ATI framebuffer
13232 driver for MPC8641HPCN board.
13234 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13235 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13237 commit ece92f85053b8df613edcf05b26a416cbc3d629c
13238 Author: Jason Jin <Jason.jin@freescale.com>
13239 Date: Fri Jul 6 08:34:56 2007 +0800
13241 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
13242 ATI video card BIOS. and can be used for x86 code emulation by some
13245 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13247 commit 5072188acabde3178fac7f5a597150e6e74fd40c
13248 Author: Jason Jin <Jason.jin@freescale.com>
13249 Date: Fri Jul 6 08:33:33 2007 +0800
13251 This is a framebuffer driver for ATI video card, can work for PCI9200,
13252 X300, X700, X800 ATI video cards.
13254 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13255 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13257 commit 5728be389e65fd47f34b33c2596271eb4db751ae
13258 Author: Wolfgang Denk <wd@denx.de>
13259 Date: Mon Aug 6 01:01:49 2007 +0200
13261 Coding style cleanup. Update CHANGELOG.
13263 Signed-off-by: Wolfgang Denk <wd@denx.de>
13265 commit 8092fef4c29b395958bb649647da7e3775731517
13266 Author: Martin Krause <Martin.Krause@tqs.de>
13267 Date: Tue Dec 12 14:26:01 2006 +0100
13269 Add functions to list of exported functions
13271 Additionally export the following fuctions (to make trab_config build again):
13275 Also bump the ABI version to reflect this change
13277 Signed-off-by: Martin Krause <martin.krause@tqs.de>
13279 commit 63cec5814fab5d2b1c86982327433807a5ac0249
13280 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13281 Date: Thu Aug 2 14:09:49 2007 -0500
13283 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
13285 All of the PCI/PCI-Express driver and initialization code that
13286 was in the MPC8641HPCN port has now been moved into the common
13287 drivers/fsl_pci_init.c. In a subsequent patch, this will be
13288 utilized by the 85xx ports as well.
13290 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
13292 Also enable the second PCI-Express controller on 8641
13293 by getting its BATS and CFG_ setup right.
13295 Fixed a u16 vendor compiler warning in AHCI driver too.
13297 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13298 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13299 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13301 commit a274ca4f6d68830e7c916f897561cff8c4101c38
13302 Author: Michal Simek <monstr@monstr.eu>
13303 Date: Sun Aug 5 22:33:05 2007 +0200
13305 [FIX] Coding style cleanup
13307 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
13308 Author: Michal Simek <monstr@monstr.eu>
13309 Date: Sun Aug 5 16:13:31 2007 +0200
13311 [FIX] Xilinx Uartlite driver
13312 Because PPC405 can use UARTLITE serial interface and
13313 Microblaze can use Uart16550 serial interface not only Uartlite.
13315 commit 98889edd50aadf862071eb5664747ad0d568a20e
13316 Author: Michal Simek <monstr@monstr.eu>
13317 Date: Sun Aug 5 15:54:53 2007 +0200
13319 [FIX] Change configuration for XUPV2P Microblaze board
13321 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
13322 Author: Michal Simek <monstr@monstr.eu>
13323 Date: Sun Aug 5 15:53:50 2007 +0200
13325 [PATCH] Added support for Xilinx Emac community driver
13327 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
13328 Author: Bartlomiej Sieka <tur@semihalf.com>
13329 Date: Fri Aug 3 12:08:16 2007 +0200
13331 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
13333 Add the ability for modules from the Schindler cm5200 family to use a
13334 single U-Boot image:
13335 - rename cm1_qp1 to cm5200
13336 - add run-time module detection
13337 - parametrize SDRAM configuration according to the module we are running on
13339 Few minor, board-specific fixes included in this patch:
13340 - better MAC address handling
13341 - updated default environment ('update' command uses +{filesize} now)
13342 - improved error messages in the auto-update code
13343 - allow booting U-Boot from RAM (CFG_RAMBOOT)
13345 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13346 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
13347 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13349 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
13350 Author: Andy Fleming <afleming@freescale.com>
13351 Date: Fri Aug 3 04:05:25 2007 -0500
13353 Add Marvell 1149 PHY support to the TSEC
13355 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
13356 Author: Wolfgang Denk <wd@denx.de>
13357 Date: Thu Aug 2 21:27:46 2007 +0200
13359 Coding style cleanup, update CHANGELOG
13361 Signed-off-by: Wolfgang Denk <wd@denx.de>
13363 commit 63e22764d2f8653f68888c667eb65b3996b52680
13364 Author: Wolfgang Denk <wd@denx.de>
13365 Date: Thu Aug 2 10:11:18 2007 +0200
13367 Minor cleanup of <board>_nand build rules.
13369 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
13370 Author: Stefan Roese <sr@denx.de>
13371 Date: Thu Aug 2 08:33:56 2007 +0200
13373 ppc4xx: Code cleanup
13375 Signed-off-by: Stefan Roese <sr@denx.de>
13377 commit c92409812206ac67a7fa7aae298539a9c3804a46
13378 Author: Grzegorz Bernacki <gjb@semihalf.com>
13379 Date: Tue Jul 31 18:51:48 2007 +0200
13381 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
13383 During config transactions on the PCIe bus an attempt to scan for a
13384 non-existent device can lead to a machine check exception with certain
13385 peripheral devices. In order to avoid crashing in such scenarios the
13386 instrumented versions of the config cycle read routines are introduced, so
13387 the exceptions fixups framework can gracefully recover.
13389 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13390 Acked-by: Rafal Jaworowski <raj@semihalf.com>
13392 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
13393 Author: Rafal Jaworowski <raj@semihalf.com>
13394 Date: Tue Jul 31 18:19:54 2007 +0200
13396 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
13398 This brings back separate settings for PCIe bus numbers depending on chip
13399 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
13400 commit. 440SPe rev. A does NOT work properly with the same settings as for
13401 the rev. B (no devices are seen on the bus during enumeration).
13403 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13405 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
13406 Author: Wolfgang Denk <wd@denx.de>
13407 Date: Thu Aug 2 00:48:45 2007 +0200
13409 Fix build errors and warnings / code cleanup.
13411 Signed-off-by: Wolfgang Denk <wd@denx.de>
13413 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
13414 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
13415 Date: Tue Jul 31 10:24:56 2007 +0200
13417 ppc4xx: Update AMCC Bamboo 440EP support
13419 Changed storage type of cfg_simulate_spd_eeprom to const
13420 Changed storage type of gpio_tab to stack storage
13421 (Cannot access global data declarations in .bss until afer code relocation)
13423 Improved SDRAM tests to catch problems where data is not uniquely addressable
13424 (e.g. incorrectly programmed SDRAM row or columns)
13426 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
13427 Fixed AM29LV320DT (OpCode Flash) sector map
13429 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
13430 Signed-off-by: Stefan Roese <sr@denx.de>
13432 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
13433 Author: Stefan Roese <sr@denx.de>
13434 Date: Tue Jul 31 08:37:01 2007 +0200
13436 ppc4xx: Update 440EPx lwmon5 board support
13438 - Clear ECC status regs after ECC POST test
13439 - Set dcbz for ECC generation with caches enabled as default
13442 Signed-off-by: Stefan Roese <sr@denx.de>
13444 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
13445 Author: Stefan Roese <sr@denx.de>
13446 Date: Mon Jul 30 11:04:57 2007 +0200
13448 ppc4xx: Only print ECC related info when the error bis are set
13450 Signed-off-by: Stefan Roese <sr@denx.de>
13452 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
13453 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13454 Date: Fri Jul 27 16:44:31 2007 +0200
13456 new FPGA image for PLU405 board
13458 new FPGA image for PLU405 board with improved CompactFlash timing
13460 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13462 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
13463 Author: Rafal Jaworowski <raj@semihalf.com>
13464 Date: Fri Jul 27 14:43:59 2007 +0200
13466 [ADS5121] Support for the ADS5121 board
13468 The following MPC5121e subsystems are supported:
13470 - low-level CPU init
13471 - NOR Boot Flash (common CFI driver)
13477 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13478 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13479 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
13481 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
13482 Author: Rafal Jaworowski <raj@semihalf.com>
13483 Date: Fri Jul 27 14:22:04 2007 +0200
13485 [PPC] Remove unused MSR_USER definition
13487 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13489 commit d4024bb72dd81695ec099b2199eda0d27c623e62
13490 Author: John Otken <john@softadvances.com>
13491 Date: Thu Jul 26 17:49:11 2007 +0200
13493 ppc4xx: Add support for AMCC 405EP Taihu board
13495 Signed-off-by: John Otken <john@softadvances.com>
13497 commit b66091de6c7390620312c2501db23d8391e7cabb
13498 Author: Anatolij Gustschin <agust@denx.de>
13499 Date: Thu Jul 26 15:08:01 2007 +0200
13501 ppc4xx: lwmon5: Update Lime initialization
13503 Change Lime SDRAM initialization to now support 100MHz and
13504 133MHz (if enabled). Also the framebuffer is initialized to
13505 display a blue rectangle with a white border.
13507 Signed-off-by: Anatolij Gustschin <agust@denx.de>
13508 Signed-off-by: Stefan Roese <sr@denx.de>
13510 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
13511 Author: Stefan Roese <sr@denx.de>
13512 Date: Tue Jul 24 09:52:52 2007 +0200
13514 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
13516 The used Intel NOR FLASH chips have internally two dies, and are now
13517 treated as two seperate chips.
13519 Signed-off-by: Stefan Roese <sr@denx.de>
13521 commit aedf5bde179ecfbd0a96130d18996a96518b785f
13522 Author: Stefan Roese <sr@denx.de>
13523 Date: Tue Jul 24 07:20:09 2007 +0200
13525 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
13527 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
13528 interrupt controller.
13530 Signed-off-by: Stefan Roese <sr@denx.de>
13532 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
13533 Author: Stefan Roese <sr@denx.de>
13534 Date: Fri Jul 20 15:03:44 2007 +0200
13536 ppc4xx: Fix bug with default GPIO output value
13538 As spotted by Matthias Fuchs, the default output values for all GPIO1
13539 outputs were not setup correctly. This patch fixes this issue.
13541 Signed-off-by: Stefan Roese <sr@denx.de>
13543 commit 531e3e8b831f357056448fa573137d5fb37000fd
13544 Author: Pavel Kolesnikov <concord@emcraft.com>
13545 Date: Fri Jul 20 15:03:03 2007 +0200
13547 POST: Add ECC POST for the lwmon5 board
13549 This patch adds ECC Post test for the Lwmon5 board based
13550 on PPC440EPx to U-Boot.
13552 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
13553 Acked-by: Yuri Tikhonov <yur@emcraft.com>
13554 Acked-by: Stefan Roese <sr@denx.de>
13556 commit cc3023b9f95d7ac959a764471a65001062aecf41
13557 Author: Rafal Jaworowski <raj@semihalf.com>
13558 Date: Thu Jul 19 17:12:28 2007 +0200
13560 Fix breakage of 8xx boards from recent commit.
13562 This patch fixes the negative consequences for 8xx of the recent
13563 "ppc4xx: Clean up 440 exceptions handling" commit.
13565 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13567 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
13568 Author: Stefan Roese <sr@denx.de>
13569 Date: Mon Jul 16 13:11:12 2007 +0200
13571 Coding style cleanup
13573 Signed-off-by: Stefan Roese <sr@denx.de>
13575 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
13576 Author: Stefan Roese <sr@denx.de>
13577 Date: Mon Jul 16 10:02:12 2007 +0200
13579 ppc4xx: Code cleanup
13581 Signed-off-by: Stefan Roese <sr@denx.de>
13583 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
13584 Author: Stefan Roese <sr@denx.de>
13585 Date: Mon Jul 16 10:01:38 2007 +0200
13587 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
13589 Signed-off-by: Stefan Roese <sr@denx.de>
13591 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
13592 Author: Stefan Roese <sr@denx.de>
13593 Date: Mon Jul 16 10:00:43 2007 +0200
13595 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
13597 The new boardspecific DDR2 controller configuration is used for the Yucca
13598 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
13600 Signed-off-by: Stefan Roese <sr@denx.de>
13602 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
13603 Author: Stefan Roese <sr@denx.de>
13604 Date: Mon Jul 16 09:57:00 2007 +0200
13606 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
13608 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
13609 support non default, boardspecific DDR(2) controller configuration.
13611 Signed-off-by: Stefan Roese <sr@denx.de>
13613 commit 5743a9207a370b90f09b20ebd61167c806b937f3
13614 Author: Stefan Roese <sr@denx.de>
13615 Date: Mon Jul 16 08:53:51 2007 +0200
13617 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
13619 The new function remove_tlb() can be used to remove the TLB's used to
13620 map a specific memory region. This is especially useful for the DDR(2)
13621 setup routines which configure the SDRAM area temporarily as a cached
13622 area (for speedup on auto-calibration and ECC generation) and later
13623 need this area uncached for normal usage.
13625 Signed-off-by: Stefan Roese <sr@denx.de>
13627 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
13628 Author: Michal Simek <monstr@monstr.eu>
13629 Date: Mon Jul 16 00:31:07 2007 +0200
13631 [PATCH] Support for Xilinx EmacLite controller
13633 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
13634 Author: Wolfgang Denk <wd@denx.de>
13635 Date: Sat Jul 14 22:51:02 2007 +0200
13639 Signed-off-by: Wolfgang Denk <wd@denx.de>
13641 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
13642 Author: Michal Simek <monstr@monstr.eu>
13643 Date: Sat Jul 14 13:11:28 2007 +0200
13645 [FIX] support for simply measuring time
13647 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
13648 Author: Michal Simek <monstr@monstr.eu>
13649 Date: Sat Jul 14 12:41:23 2007 +0200
13651 [FS] Added support for ROMFS
13653 commit 011595307731a7a67a7445d107c279d031e8ab97
13654 Author: Heiko Schocher <hs@pollux.denx.de>
13655 Date: Sat Jul 14 01:06:58 2007 +0200
13657 [PCS440EP] - fix compile error, if BUILD_DIR is used
13659 commit 5a2f1098d81ad58b309e5e558d0492643166a799
13660 Author: Michal Simek <monstr@monstr.eu>
13661 Date: Sat Jul 14 00:18:48 2007 +0200
13663 [PATCH] Support time without timer
13665 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
13666 Author: Michal Simek <monstr@monstr.eu>
13667 Date: Fri Jul 13 21:43:55 2007 +0200
13669 [PATCH] Remove problem with disabled BARREL SHIFTER
13671 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
13672 Author: Michal Simek <monstr@monstr.eu>
13673 Date: Fri Jul 13 21:41:44 2007 +0200
13675 [FIX] correct help for rspr
13677 commit fad63407154f46246ce80d53a9c669a44362ac67
13678 Author: Heiko Schocher <hs@pollux.denx.de>
13679 Date: Fri Jul 13 09:54:17 2007 +0200
13681 make show_boot_progress () weak.
13683 Signed-off-by: Heiko Schocher <hs@denx.de>
13685 commit 907902472391b6ca1876ec300687562ecaf459b1
13686 Author: Heiko Schocher <hs@pollux.denx.de>
13687 Date: Fri Jul 13 08:26:05 2007 +0200
13689 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
13690 - fix compile error, if BUILD_DIR is used
13692 Signed-off-by: Heiko Schocher <hs@denx.de>
13694 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
13695 Author: Stefan Roese <sr@denx.de>
13696 Date: Thu Jul 12 16:32:08 2007 +0200
13698 ppc4xx: Change receive buffer handling in the 4xx emac driver
13700 This change fixes a bug in the receive buffer handling, that
13701 could lead to problems upon high network traffic (broadcasts...).
13703 Signed-off-by: Stefan Roese <sr@denx.de>
13705 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
13706 Author: Wolfgang Denk <wd@denx.de>
13707 Date: Thu Jul 12 01:45:34 2007 +0200
13709 Update CHANGELOG, minor coding style cleanup.
13711 Signed-off-by: Wolfgang Denk <wd@denx.de>
13713 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
13714 Author: Andy Fleming <afleming@freescale.com>
13715 Date: Fri Jun 8 16:41:18 2007 -0500
13717 Remove erroneous errata code from Marvel 88E1111S driver
13719 The Marvel 88E1111S driver for the TSEC was copied from the
13720 88E1101 driver, and included a fix for an erratum which does not
13721 exist on that part. Now it is removed
13723 Signed-off-by: Andy Fleming <afleming@freescale.com>
13725 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
13726 Author: Andy Fleming <afleming@freescale.com>
13727 Date: Tue Jun 5 16:38:44 2007 -0500
13729 From: eran liberty <eran.liberty@gmail.com>
13731 adds the reset register to 85xx immap
13733 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
13734 Signed-off-by: Andy Fleming <afleming@freescale.com>
13736 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
13737 Author: Andy Fleming <afleming@freescale.com>
13738 Date: Thu May 10 17:50:01 2007 -0500
13740 Polished the 85xx ADS config files
13742 Made the boot commands use device trees by default.
13743 Also moved the ramdisk to 1000000 (I think the previous address
13744 was getting overridden during boot).
13746 Signed-off-by: Andy Fleming <afleming@freescale.com>
13748 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
13749 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13750 Date: Wed May 9 11:03:32 2007 -0500
13752 8544ds: Fix Makefile after moving pixis to board/freescale.
13754 The OBJTREE != SRCTREE build scenario was broken.
13757 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13758 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13760 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
13761 Author: Andy Fleming <afleming@freescale.com>
13762 Date: Wed May 9 00:54:20 2007 -0500
13764 tsec: Fix PHY code to match first driver
13766 Jarrold Wen noticed that the generic PHY code always matches
13767 under the current implementation. Change it so the first match
13768 wins, and *only* unknown PHYs trigger the generic driver
13770 Signed-off-by: Andy Fleming <afleming@freescale.com>
13772 commit ccc091aac61a38cd998d575d92f7232e256d6312
13773 Author: Andy Fleming <afleming@freescale.com>
13774 Date: Tue May 8 17:27:43 2007 -0500
13776 Add support for CPM device tree configuration to 8560 ADS
13778 * Adds code to modify CPM frequencies
13779 * Cleans up the config file to #define TSEC and (for now) #undef FCC
13780 * Adds the MII command for all 8560 ADS configurations
13781 * Updates config file to provide convenience commands for booting
13784 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
13785 Signed-off-by: Andy Fleming <afleming@freescale.com>
13787 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
13788 Author: Andy Fleming <afleming@freescale.com>
13789 Date: Tue May 8 17:23:02 2007 -0500
13791 Fix Marvell 88e1145 PHY init code
13793 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
13794 where the reset was being done after the errata code instead of
13797 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
13798 Signed-off-by: Andy Fleming <afleming@freescale.com>
13800 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
13801 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13802 Date: Wed Jul 11 14:52:16 2007 -0500
13804 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
13806 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13808 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
13809 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13810 Date: Wed Jul 11 14:52:08 2007 -0500
13812 pciauto setup bridge
13814 The P2P bridge bus numbers programmed into the device are relative to
13817 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13819 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
13820 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13821 Date: Wed Jul 11 14:52:01 2007 -0500
13823 Support PCIe extended config registers
13825 FSL PCIe block has extended cfg registers in the 100 and 400 range.
13826 For example, to read the LTSSM register: pci display <busn>.0 404 1
13828 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13830 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
13831 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13832 Date: Wed Jul 11 14:51:48 2007 -0500
13834 Minor improvements to drivers/pci_auto.c
13836 - Make pciauto_{pre,post}scan_setup_bridge non-static
13837 - Added physical address display in debug messages.
13839 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13841 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
13842 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13843 Date: Wed Jul 11 14:51:35 2007 -0500
13845 Start pci hose scan from hose->current_busno.
13847 Ensure hose->current_busno is not less than first_busno. This fixes
13848 broken board code which leaves current_busno=0 when first_busno is
13849 greater than 0 for the cases with multiple controllers.
13851 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
13853 commit 3865b1fb7843a08ad49a6319a36415752276ff48
13854 Author: Stefan Roese <sr@denx.de>
13855 Date: Wed Jul 11 12:13:53 2007 +0200
13857 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
13859 Signed-off-by: Stefan Roese <sr@denx.de>
13861 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
13862 Author: Bartlomiej Sieka <tur@semihalf.com>
13863 Date: Wed Jul 11 20:11:07 2007 +0200
13865 CM1.QP1: Support for the Schindler CM1.QP1 board.
13867 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
13868 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13870 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
13871 Author: Heiko Schocher <hs@pollux.denx.de>
13872 Date: Wed Jul 11 18:39:11 2007 +0200
13874 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
13875 - now the Flash ST M29W040B is supported (not tested)
13876 - fix the "led" command
13877 - fix compile error, if BUILD_DIR is used
13879 Signed-off-by: Heiko Schocher <hs@denx.de>
13881 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
13882 Author: Stefan Roese <sr@denx.de>
13883 Date: Sun Jul 8 13:44:27 2007 +0200
13885 Fix malloc problem introduced with the relocation fixup for the PPC platform
13887 The relocation fixup didn't handle the malloc pointer initialization
13888 correctly. This patch fixes this problem. Tested successfully on 4xx.
13889 The relocation fixup patches for 4xx will follow soon.
13891 Signed-off-by: Stefan Roese <sr@denx.de>
13893 commit 0dca874db62718e41253659e60f3a1de7eb418ce
13894 Author: TsiChung <tcliew@Goku.(none)>
13895 Date: Tue Jul 10 15:45:43 2007 -0500
13897 Cache update and added CFG_UNIFY_CACHE
13899 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
13901 Signed-off-by: TsiChung <tcliew@Goku.(none)>
13903 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
13904 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13905 Date: Thu Jul 5 23:36:16 2007 -0500
13907 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
13909 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
13911 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13913 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
13914 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13915 Date: Thu Jul 5 23:31:25 2007 -0500
13917 Update header files
13919 Include immap.h and renamed mcfrtc.h to rtc.h
13921 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13923 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
13924 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13925 Date: Thu Jul 5 23:29:21 2007 -0500
13927 Add mcffec_initialize()
13929 Added mcffec_initialize() in eth_initialize()
13931 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13933 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
13934 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13935 Date: Thu Jul 5 23:27:40 2007 -0500
13937 Update header file and clean up
13941 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13943 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
13944 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13945 Date: Thu Jul 5 23:23:15 2007 -0500
13947 New uart structure and defines
13949 Seperated from mcfuart.h
13951 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13953 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
13954 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13955 Date: Thu Jul 5 23:22:31 2007 -0500
13957 New timer structure and defines
13959 Seperated from mcftimer.h
13961 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13963 commit e04acb2eba4782489417240eff76e20e176aec10
13964 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13965 Date: Thu Jul 5 23:21:09 2007 -0500
13967 Rename mcfrtc to rtc
13969 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
13971 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13973 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
13974 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13975 Date: Thu Jul 5 23:17:36 2007 -0500
13977 Rename mcfserial.c. Update include header
13979 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
13981 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13983 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
13984 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13985 Date: Thu Jul 5 23:13:58 2007 -0500
13987 Header file update, clean up and cache handling
13989 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
13991 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13993 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
13994 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13995 Date: Thu Jul 5 23:10:40 2007 -0500
13997 Create interrupts.c and modify Makefile
13999 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
14001 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14003 commit ddd104f1ed655eda50c06ba636237a83ed943f34
14004 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14005 Date: Thu Jul 5 23:06:55 2007 -0500
14009 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14011 commit b9bf3de377b2bae70c983c9b97feae914999e735
14012 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14013 Date: Thu Jul 5 23:05:31 2007 -0500
14015 Update header file and some clean up
14017 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
14019 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14021 commit 84a015b52ec820a5ae173717d78516de731c89c2
14022 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14023 Date: Thu Jul 5 23:03:28 2007 -0500
14025 Update header file and enable icache
14027 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
14029 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14031 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
14032 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14033 Date: Thu Jul 5 23:01:22 2007 -0500
14035 Update header file and removed interrupt_init()
14037 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
14039 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14041 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
14042 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14043 Date: Thu Jul 5 22:57:46 2007 -0500
14045 Update for flash.o and mii.o
14047 Removed flash.o and added mii.o
14049 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14051 commit c5ded275d839e4ff79f41718d50a835d989f57bc
14052 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14053 Date: Thu Jul 5 22:56:19 2007 -0500
14055 MII functions calls.
14057 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14059 commit 427c814104560e29bda14955c67703245aaaa5b4
14060 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14061 Date: Thu Jul 5 22:54:42 2007 -0500
14063 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
14065 The removed MII routines will be placed in mii.c.
14067 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14069 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
14070 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14071 Date: Thu Jul 5 22:51:05 2007 -0500
14075 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
14077 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14079 commit 2744354a8437b8f78db178e30660215688bff570
14080 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14081 Date: Thu Jul 5 22:46:38 2007 -0500
14083 Seperate old structure defines and new structure defines
14085 Removed new uart structure and defines to uart.h
14087 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14089 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
14090 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14091 Date: Thu Jul 5 22:45:01 2007 -0500
14093 Seperate old structure defines and new structure defines
14095 New timer structure and defines will move to new timer.h
14097 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14099 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
14100 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14101 Date: Thu Jul 5 22:42:23 2007 -0500
14107 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14109 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
14110 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14111 Date: Thu Jul 5 22:41:24 2007 -0500
14115 Replaced whitespace with tabs
14117 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14119 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
14120 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14121 Date: Thu Jul 5 22:39:07 2007 -0500
14123 Create new header file and move peripherals base address from configs file to new header file.
14125 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
14127 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14129 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
14130 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14131 Date: Thu Jul 5 22:24:58 2007 -0500
14135 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
14137 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14139 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
14140 Author: Jon Loeliger <jdl@freescale.com>
14141 Date: Tue Jul 10 11:19:50 2007 -0500
14143 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
14145 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14146 Those always evaluated TRUE, and thus were always compiled
14147 even when IDE really wasn't defined/wanted.
14149 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14151 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
14152 Author: Jon Loeliger <jdl@freescale.com>
14153 Date: Tue Jul 10 11:13:21 2007 -0500
14155 drivers/: Remove lingering references to CFG_CMD_* symbols.
14157 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14158 Those always evaluated TRUE, and thus were always compiled
14159 even when IDE really wasn't defined/wanted.
14161 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14163 commit f40a7f3e3888b42a43674b099e5470022c8c544c
14164 Author: Jon Loeliger <jdl@freescale.com>
14165 Date: Tue Jul 10 11:07:56 2007 -0500
14167 fs/: Remove lingering references to CFG_CMD_* symbols.
14169 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14170 Those always evaluated TRUE, and thus were always compiled
14171 even when IDE really wasn't defined/wanted.
14173 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14175 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
14176 Author: Jon Loeliger <jdl@freescale.com>
14177 Date: Tue Jul 10 11:05:02 2007 -0500
14179 net/: Remove lingering references to CFG_CMD_* symbols.
14181 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14182 Those always evaluated TRUE, and thus were always compiled
14183 even when IDE really wasn't defined/wanted.
14185 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14187 commit 902531788376046da212afd1661cffb62f3daa1c
14188 Author: Jon Loeliger <jdl@freescale.com>
14189 Date: Tue Jul 10 11:02:44 2007 -0500
14191 common/: Remove lingering references to CFG_CMD_* symbols.
14193 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14194 Those always evaluated TRUE, and thus were always compiled
14195 even when IDE really wasn't defined/wanted.
14197 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14199 commit d39b57415838c73fb0a37eca84de3c68ba990586
14200 Author: Jon Loeliger <jdl@freescale.com>
14201 Date: Tue Jul 10 10:48:22 2007 -0500
14203 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
14205 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14206 Those always evaluated TRUE, and thus were always compiled
14207 even when IDE really wasn't defined/wanted.
14209 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14211 commit 77a318545d57aefa844752465b94c7e09a3f26d0
14212 Author: Jon Loeliger <jdl@freescale.com>
14213 Date: Tue Jul 10 10:39:10 2007 -0500
14215 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
14217 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
14218 Those always evaluated TRUE, and thus were always compiled
14219 even when IDE really wasn't defined/wanted.
14221 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14223 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
14224 Author: Jon Loeliger <jdl@freescale.com>
14225 Date: Tue Jul 10 10:27:39 2007 -0500
14227 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
14229 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14231 commit 079a136c3588814784561d6e4856970ee82d6e2a
14232 Author: Jon Loeliger <jdl@freescale.com>
14233 Date: Tue Jul 10 10:12:10 2007 -0500
14235 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
14237 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14238 used to be included but CONFIG_BOOTP_MASK was not defined.
14240 Remove lingering references to CFG_CMD_* symbols.
14242 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14244 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
14245 Author: Jon Loeliger <jdl@freescale.com>
14246 Date: Tue Jul 10 09:38:02 2007 -0500
14248 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
14250 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14251 used to be included but CONFIG_BOOTP_MASK was not defined.
14253 Remove lingering references to CFG_CMD_* symbols.
14255 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14257 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
14258 Author: Jon Loeliger <jdl@freescale.com>
14259 Date: Tue Jul 10 09:29:01 2007 -0500
14261 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
14263 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14264 used to be included but CONFIG_BOOTP_MASK was not defined.
14266 Remove lingering references to CFG_CMD_* symbols.
14268 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14270 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
14271 Author: Jon Loeliger <jdl@freescale.com>
14272 Date: Tue Jul 10 09:22:23 2007 -0500
14274 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
14276 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14277 used to be included but CONFIG_BOOTP_MASK was not defined.
14279 Remove lingering references to CFG_CMD_* symbols.
14281 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14283 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
14284 Author: Jon Loeliger <jdl@freescale.com>
14285 Date: Tue Jul 10 09:10:49 2007 -0500
14287 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
14289 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14290 used to be included but CONFIG_BOOTP_MASK was not defined.
14292 Remove lingering references to CFG_CMD_* symbols.
14294 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14296 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
14297 Author: Jon Loeliger <jdl@freescale.com>
14298 Date: Tue Jul 10 09:02:57 2007 -0500
14300 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
14302 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
14303 used to be included but CONFIG_BOOTP_MASK was not defined.
14305 Remove lingering references to CFG_CMD_* symbols.
14307 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14309 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
14310 Author: Jon Loeliger <jdl@freescale.com>
14311 Date: Mon Jul 9 22:08:34 2007 -0500
14313 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
14315 All of the choices for CONFIG_BOOTP_ are now documented in
14316 the README file. You must now individually select exactly
14317 the set that you want using a series of
14318 #define CONFIG_BOOTP_<x>
14319 statements in the board port config files now.
14321 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14323 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
14324 Author: Jon Loeliger <jdl@freescale.com>
14325 Date: Mon Jul 9 21:57:31 2007 -0500
14327 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14329 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14331 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
14332 Author: Jon Loeliger <jdl@freescale.com>
14333 Date: Mon Jul 9 21:48:26 2007 -0500
14335 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14337 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14339 commit 37d4bb70586659dedef1658ce1bed071be098aec
14340 Author: Jon Loeliger <jdl@freescale.com>
14341 Date: Mon Jul 9 21:38:02 2007 -0500
14343 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14345 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14347 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
14348 Author: Jon Loeliger <jdl@freescale.com>
14349 Date: Mon Jul 9 21:31:24 2007 -0500
14351 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14353 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14355 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
14356 Author: Jon Loeliger <jdl@freescale.com>
14357 Date: Mon Jul 9 21:24:19 2007 -0500
14359 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14361 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14363 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
14364 Author: Jon Loeliger <jdl@freescale.com>
14365 Date: Mon Jul 9 21:16:53 2007 -0500
14367 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
14369 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14371 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
14372 Author: Jon Loeliger <jdl@freescale.com>
14373 Date: Mon Jul 9 19:12:30 2007 -0500
14375 Retire CONFIG_COMMANDS finally.
14376 Strip old CFG_CMD_* symbols out.
14378 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14380 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
14381 Author: Jon Loeliger <jdl@freescale.com>
14382 Date: Mon Jul 9 19:10:03 2007 -0500
14384 Update README.* to reference new CONFIG_CMD_* names now.
14386 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14388 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
14389 Author: Jon Loeliger <jdl@freescale.com>
14390 Date: Mon Jul 9 19:06:00 2007 -0500
14392 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
14394 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14396 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
14397 Author: Jon Loeliger <jdl@freescale.com>
14398 Date: Mon Jul 9 18:57:22 2007 -0500
14400 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
14402 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14404 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
14405 Author: Jon Loeliger <jdl@freescale.com>
14406 Date: Mon Jul 9 18:45:16 2007 -0500
14408 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
14410 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14412 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
14413 Author: Jon Loeliger <jdl@freescale.com>
14414 Date: Mon Jul 9 18:38:39 2007 -0500
14416 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
14418 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14420 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
14421 Author: Jon Loeliger <jdl@freescale.com>
14422 Date: Mon Jul 9 18:31:28 2007 -0500
14424 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
14426 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14428 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
14429 Author: Jon Loeliger <jdl@freescale.com>
14430 Date: Mon Jul 9 18:24:55 2007 -0500
14432 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
14434 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14436 commit fcec2eb93e126400009729328e797f12bc94f1fd
14437 Author: Jon Loeliger <jdl@freescale.com>
14438 Date: Mon Jul 9 18:19:09 2007 -0500
14440 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
14442 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14444 commit a593814f2be0c9cdc3133cd550b167b8a988328f
14445 Author: Jon Loeliger <jdl@freescale.com>
14446 Date: Mon Jul 9 18:10:50 2007 -0500
14448 rtc/: Remove obsolete references to CONFIG_COMMANDS
14450 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14452 commit 67350568f9d46e66c21829f3513b3db0caeb948b
14453 Author: Jon Loeliger <jdl@freescale.com>
14454 Date: Mon Jul 9 18:05:38 2007 -0500
14456 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
14458 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14460 commit 7def6b34f910f08d7ef0a14646da067719237ca2
14461 Author: Jon Loeliger <jdl@freescale.com>
14462 Date: Mon Jul 9 18:02:11 2007 -0500
14464 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
14466 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14468 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
14469 Author: Jon Loeliger <jdl@freescale.com>
14470 Date: Mon Jul 9 17:56:50 2007 -0500
14472 fs/: Remove obsolete references to CONFIG_COMMANDS
14474 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14476 commit c91898bbc505aff3e12a807af88e76da18efb7ee
14477 Author: Jon Loeliger <jdl@freescale.com>
14478 Date: Mon Jul 9 17:46:09 2007 -0500
14480 tools/: Remove obsolete references to CONFIG_COMMANDS
14482 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14484 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
14485 Author: Jon Loeliger <jdl@freescale.com>
14486 Date: Mon Jul 9 17:45:14 2007 -0500
14488 net/: Remove obsolete references to CONFIG_COMMANDS
14490 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14492 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
14493 Author: Jon Loeliger <jdl@freescale.com>
14494 Date: Mon Jul 9 17:39:42 2007 -0500
14496 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
14498 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14500 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
14501 Author: Jon Loeliger <jdl@freescale.com>
14502 Date: Mon Jul 9 17:30:01 2007 -0500
14504 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
14506 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14508 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
14509 Author: Jon Loeliger <jdl@freescale.com>
14510 Date: Mon Jul 9 17:22:37 2007 -0500
14512 disk/: Remove obsolete references to CONFIG_COMMANDS
14514 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14516 commit 639221c76c88215bd55af83ad174fc30d1940f8f
14517 Author: Jon Loeliger <jdl@freescale.com>
14518 Date: Mon Jul 9 17:15:49 2007 -0500
14520 include/: Remove obsolete references to CONFIG_COMMANDS
14521 Mostly removed from comments here.
14523 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14525 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
14526 Author: Wolfgang Denk <wd@denx.de>
14527 Date: Tue Jul 10 00:01:28 2007 +0200
14529 Coding style cleanup; update CHANGELOG.
14531 Signed-off-by: Wolfgang Denk <wd@denx.de>
14533 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
14534 Author: Stefan Roese <sr@denx.de>
14535 Date: Mon Jul 9 11:00:24 2007 +0200
14537 Small coding style cleanup
14539 Signed-off-by: Stefan Roese <sr@denx.de>
14541 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
14542 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14543 Date: Mon Jul 9 10:10:08 2007 +0200
14545 Migrate esd 405EP boards to new NAND subsystem
14547 Remove unused CFG_NAND_LEGACY define
14549 These boards to not have NAND.
14551 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14553 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
14554 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14555 Date: Mon Jul 9 10:10:06 2007 +0200
14557 Migrate esd 405EP boards to new NAND subsystem
14559 Migrate esd 405EP boards to new NAND subsystem
14562 -use correct io accessors (in/out_be32())
14564 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14566 commit e09f7ab5749c345f924da272bea0521a73af5b11
14567 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14568 Date: Mon Jul 9 10:10:04 2007 +0200
14570 Migrate esd 405EP boards to new NAND subsystem
14572 This patch prepares the migration from the legacy NAND driver
14573 to U-Boot's new NAND subsystem for esd boards.
14575 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14577 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
14578 Author: Jon Loeliger <jdl@freescale.com>
14579 Date: Sun Jul 8 18:10:08 2007 -0500
14581 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
14583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14585 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
14586 Author: Jon Loeliger <jdl@freescale.com>
14587 Date: Sun Jul 8 18:05:39 2007 -0500
14589 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
14591 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14593 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
14594 Author: Jon Loeliger <jdl@freescale.com>
14595 Date: Sun Jul 8 18:02:23 2007 -0500
14597 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
14599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14601 commit baa26db4113679b80970ff447d91cc10217742a6
14602 Author: Jon Loeliger <jdl@freescale.com>
14603 Date: Sun Jul 8 17:51:39 2007 -0500
14605 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
14607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14609 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
14610 Author: Jon Loeliger <jdl@freescale.com>
14611 Date: Sun Jul 8 17:02:01 2007 -0500
14613 Clear up confusion over the CMD_POST and POST_DIAG mess.
14615 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
14616 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
14617 Clear this mess up some.
14619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14621 commit b3631487105a57ab7cbadfc26efbaf9676275018
14622 Author: Jon Loeliger <jdl@freescale.com>
14623 Date: Sun Jul 8 15:45:08 2007 -0500
14625 Remove references to the old cmd_confdefs.h include file.
14627 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14629 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
14630 Author: Jon Loeliger <jdl@freescale.com>
14631 Date: Sun Jul 8 15:42:59 2007 -0500
14633 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
14635 Use new CONFIG_CMD_* in lwmon5.h board config file.
14636 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
14638 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14640 commit a5562901661bd428f7e5feb333f796372cb81019
14641 Author: Jon Loeliger <jdl@freescale.com>
14642 Date: Sun Jul 8 15:31:57 2007 -0500
14644 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
14646 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14648 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
14649 Author: Jon Loeliger <jdl@freescale.com>
14650 Date: Sun Jul 8 15:02:44 2007 -0500
14652 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
14654 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14656 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
14657 Author: Jon Loeliger <jdl@freescale.com>
14658 Date: Sun Jul 8 15:12:40 2007 -0500
14660 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
14662 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14664 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
14665 Author: Jon Loeliger <jdl@freescale.com>
14666 Date: Sun Jul 8 14:55:07 2007 -0500
14668 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
14670 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14672 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
14673 Author: Jon Loeliger <jdl@freescale.com>
14674 Date: Sun Jul 8 14:49:44 2007 -0500
14676 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
14678 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14680 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
14681 Author: Jon Loeliger <jdl@freescale.com>
14682 Date: Sun Jul 8 14:21:43 2007 -0500
14684 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
14686 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14688 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
14689 Author: Jon Loeliger <jdl@freescale.com>
14690 Date: Sun Jul 8 14:14:17 2007 -0500
14692 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
14694 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14696 commit 348f258f24253433e4a2302a0bbceb6740a67246
14697 Author: Jon Loeliger <jdl@freescale.com>
14698 Date: Sun Jul 8 13:46:18 2007 -0500
14700 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
14702 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14704 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
14705 Author: Jon Loeliger <jdl@freescale.com>
14706 Date: Sun Jul 8 10:09:35 2007 -0500
14708 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
14710 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14712 commit 60a0876b5106b34220e459c208bbf648073306c0
14713 Author: Jon Loeliger <jdl@freescale.com>
14714 Date: Sat Jul 7 21:04:26 2007 -0500
14716 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
14718 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14720 commit dcaa71562826a2466e894c868d132509dcda8444
14721 Author: Jon Loeliger <jdl@freescale.com>
14722 Date: Sat Jul 7 20:56:05 2007 -0500
14724 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
14726 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14728 commit 3c3227f3c737502311b25b72084573901cbbf17d
14729 Author: Jon Loeliger <jdl@freescale.com>
14730 Date: Sat Jul 7 20:40:43 2007 -0500
14732 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
14734 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14736 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
14737 Author: Jon Loeliger <jdl@freescale.com>
14738 Date: Thu Jul 5 19:52:35 2007 -0500
14740 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
14742 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14744 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
14745 Author: Jon Loeliger <jdl@freescale.com>
14746 Date: Thu Jul 5 19:32:07 2007 -0500
14748 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
14750 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14752 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
14753 Author: Jon Loeliger <jdl@freescale.com>
14754 Date: Thu Jul 5 19:13:52 2007 -0500
14756 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
14758 Since ADS860.h includes "board/fads/fads.h" with ramifications
14759 on the CONFIG_COMMAND treatment, it too has to be adjusted to
14760 exclude already configured commands in this same commit.
14762 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14764 commit 10e038932f22ee80ebd53de312531e70e6590a2f
14765 Author: Thomas Knobloch <knobloch@siemens.com>
14766 Date: Fri Jul 6 14:58:39 2007 +0200
14768 [NAND] Bad block skipping for command nboot
14770 The old implementation of command nboot does not support reading the image from
14771 NAND flash with skipping of bad blocks. The patch implements a new version of
14772 the nboot command: by calling nboot.jffs2 from the u-boot command line the
14773 command will load the image from NAND flash with respect to bad blocks (by using
14774 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
14777 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
14778 Signed-off-by: Stefan Roese <sr@denx.de>
14780 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
14781 Author: Stefan Roese <sr@denx.de>
14782 Date: Fri Jul 6 12:26:51 2007 +0200
14784 ppc4xx: Update lwmon5 default environment
14786 Signed-off-by: Stefan Roese <sr@denx.de>
14788 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
14789 Author: Stefan Roese <sr@denx.de>
14790 Date: Fri Jul 6 11:48:24 2007 +0200
14792 ppc4xx: Update lwmon5 board
14794 Add unlock=yes environment variable to default variables to unlock
14795 the CFI flash by default.
14797 Signed-off-by: Stefan Roese <sr@denx.de>
14799 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
14800 Author: Stefan Roese <sr@denx.de>
14801 Date: Fri Jul 6 09:45:47 2007 +0200
14803 Fix problem with get/setdcr commands introduced by cfg patches
14805 Signed-off-by: Stefan Roese <sr@denx.de>
14807 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
14808 Author: Wolfgang Denk <wd@denx.de>
14809 Date: Fri Jul 6 02:50:19 2007 +0200
14811 Code cleanup and default config update for STC GP3 SSA board.
14813 Signed-off-by: Wolfgang Denk <wd@denx.de>
14815 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
14816 Author: Wolfgang Denk <wd@denx.de>
14817 Date: Thu Jul 5 17:56:27 2007 +0200
14819 Fixing some typos etc. introduced mainly by cfg patches.
14821 Signed-off-by: Wolfgang Denk <wd@denx.de>
14823 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
14824 Author: Wolfgang Denk <wd@denx.de>
14825 Date: Thu Jul 5 11:12:16 2007 +0200
14827 Minor coding style cleanup. Update CHANGELOG.
14829 commit dca3b3d6d6396b67e5e84af53452164923c73443
14830 Author: Jon Loeliger <jdl@jdl.com>
14831 Date: Wed Jul 4 22:33:46 2007 -0500
14833 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
14835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14837 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
14838 Author: Jon Loeliger <jdl@jdl.com>
14839 Date: Wed Jul 4 22:33:38 2007 -0500
14841 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
14843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14845 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
14846 Author: Jon Loeliger <jdl@jdl.com>
14847 Date: Wed Jul 4 22:33:30 2007 -0500
14849 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
14851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14853 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
14854 Author: Jon Loeliger <jdl@jdl.com>
14855 Date: Wed Jul 4 22:33:23 2007 -0500
14857 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
14859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14861 commit 26a34560d56a9df5bc2ae23525d9229736134757
14862 Author: Jon Loeliger <jdl@jdl.com>
14863 Date: Wed Jul 4 22:33:17 2007 -0500
14865 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
14867 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14869 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
14870 Author: Jon Loeliger <jdl@jdl.com>
14871 Date: Wed Jul 4 22:33:13 2007 -0500
14873 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
14875 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14877 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
14878 Author: Jon Loeliger <jdl@jdl.com>
14879 Date: Wed Jul 4 22:33:07 2007 -0500
14881 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
14883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14885 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
14886 Author: Jon Loeliger <jdl@jdl.com>
14887 Date: Wed Jul 4 22:33:01 2007 -0500
14889 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
14891 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14893 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
14894 Author: Jon Loeliger <jdl@jdl.com>
14895 Date: Wed Jul 4 22:32:57 2007 -0500
14897 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
14899 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14901 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
14902 Author: Jon Loeliger <jdl@jdl.com>
14903 Date: Wed Jul 4 22:32:51 2007 -0500
14905 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
14907 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14909 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
14910 Author: Jon Loeliger <jdl@jdl.com>
14911 Date: Wed Jul 4 22:32:32 2007 -0500
14913 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
14915 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14917 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
14918 Author: Jon Loeliger <jdl@jdl.com>
14919 Date: Wed Jul 4 22:32:25 2007 -0500
14921 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
14923 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14925 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
14926 Author: Jon Loeliger <jdl@jdl.com>
14927 Date: Wed Jul 4 22:32:19 2007 -0500
14929 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
14931 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14933 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
14934 Author: Jon Loeliger <jdl@jdl.com>
14935 Date: Wed Jul 4 22:32:10 2007 -0500
14937 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
14939 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14941 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
14942 Author: Jon Loeliger <jdl@jdl.com>
14943 Date: Wed Jul 4 22:32:03 2007 -0500
14945 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
14947 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14949 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
14950 Author: Jon Loeliger <jdl@jdl.com>
14951 Date: Wed Jul 4 22:31:56 2007 -0500
14953 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
14955 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14957 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
14958 Author: Jon Loeliger <jdl@jdl.com>
14959 Date: Wed Jul 4 22:31:49 2007 -0500
14961 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
14963 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14965 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
14966 Author: Jon Loeliger <jdl@jdl.com>
14967 Date: Wed Jul 4 22:31:42 2007 -0500
14969 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
14971 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14973 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
14974 Author: Jon Loeliger <jdl@jdl.com>
14975 Date: Wed Jul 4 22:31:35 2007 -0500
14977 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
14979 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14981 commit d794cfefead5fc177cf4f41164e80382e9c9484a
14982 Author: Jon Loeliger <jdl@jdl.com>
14983 Date: Wed Jul 4 22:31:15 2007 -0500
14985 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
14987 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14989 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
14990 Author: Jon Loeliger <jdl@jdl.com>
14991 Date: Wed Jul 4 22:31:07 2007 -0500
14993 include/configs: Use new CONFIG_CMD_* in STx board config files.
14995 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14997 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
14998 Author: Jon Loeliger <jdl@jdl.com>
14999 Date: Wed Jul 4 22:30:58 2007 -0500
15001 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
15003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15005 commit 2694690e285acaa34922f55f4b5ae030da60c55a
15006 Author: Jon Loeliger <jdl@jdl.com>
15007 Date: Wed Jul 4 22:30:50 2007 -0500
15009 include/configs: Use new CONFIG_CMD_* in TQM board config files.
15011 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15013 commit 1cc4c458329765b58e584a19821e796b3c10e976
15014 Author: Jon Loeliger <jdl@jdl.com>
15015 Date: Wed Jul 4 22:30:28 2007 -0500
15017 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
15019 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15021 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
15022 Author: Jon Loeliger <jdl@jdl.com>
15023 Date: Wed Jul 4 22:30:06 2007 -0500
15025 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
15027 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15029 commit b44896215a09c60fa40cae906f7ed207bbc2c492
15030 Author: Sergei Poselenov <sposelenov@emcraft.com>
15031 Date: Thu Jul 5 08:17:37 2007 +0200
15033 Merged POST framework with the current TOT.
15035 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15037 commit b24629fa377214d63bb40d1360e354b6d3e4af56
15038 Author: Jon Loeliger <jdl@jdl.com>
15039 Date: Wed Jun 13 13:23:15 2007 -0500
15041 mpc86xx: Remove old CFG_CMD_* references.
15043 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15045 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
15046 Author: Jon Loeliger <jdl@jdl.com>
15047 Date: Wed Jun 13 13:22:54 2007 -0500
15049 Add MPC8568MDS to MAKEALL 85xx target.
15051 It was missing from the original port submission.
15053 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15055 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
15056 Author: Jon Loeliger <jdl@jdl.com>
15057 Date: Wed Jun 13 13:22:08 2007 -0500
15059 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
15061 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15063 commit 56b304ac2091689506088a9ae67f63fd6300cf16
15064 Author: Jon Loeliger <jdl@jdl.com>
15065 Date: Wed Jun 13 13:21:37 2007 -0500
15067 Fix #if typo in CONFIG_CMD_* changes.
15069 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15071 commit f780b83316d9af1f61d71cc88b1917b387b9b995
15072 Author: Niklaus Giger <niklausgiger@gmx.ch>
15073 Date: Wed Jun 27 18:11:38 2007 +0200
15075 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
15077 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
15079 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
15080 Author: Stefan Roese <sr@denx.de>
15081 Date: Wed Jul 4 10:06:30 2007 +0200
15083 ppc4xx: Update lwmon5 board
15085 - Add optional ECC generation routine to preserve existing
15086 RAM values. This is needed for the Linux log-buffer support
15087 - Add optional DDR2 setup with CL=4
15088 - GPIO50 not used anymore
15089 - Lime register setup added
15091 Signed-off-by: Stefan Roese <sr@denx.de>
15093 commit 6810a34677dbc446334f5e451f1682426dd33b49
15094 Author: Grant Likely <grant.likely@secretlab.ca>
15095 Date: Tue Jul 3 00:17:28 2007 -0600
15097 Fix Makefile to use $(MKCONFIG) macro for all board ports
15099 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15101 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
15102 Author: Grant Likely <grant.likely@secretlab.ca>
15103 Date: Tue Jul 3 00:17:28 2007 -0600
15105 Fix Makefile to use $(MKCONFIG) macro for all board ports
15107 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15109 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
15110 Author: Grant Likely <grant.likely@secretlab.ca>
15111 Date: Tue Jul 3 00:34:49 2007 -0600
15113 Correct fixup relocation for mpc83xx
15115 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15117 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
15118 Author: Grant Likely <grant.likely@secretlab.ca>
15119 Date: Tue Jul 3 00:34:44 2007 -0600
15121 Correct fixup relocation for mpc8260
15123 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15125 commit f3a52fe05923935db86985daf9438e2f70ac39aa
15126 Author: Grant Likely <grant.likely@secretlab.ca>
15127 Date: Tue Jul 3 00:34:39 2007 -0600
15129 Correct fixup relocation for mpc824x
15131 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15133 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
15134 Author: Grant Likely <grant.likely@secretlab.ca>
15135 Date: Tue Jul 3 00:34:34 2007 -0600
15137 Correct fixup relocation for mpc8220
15139 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15141 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
15142 Author: Grant Likely <grant.likely@secretlab.ca>
15143 Date: Tue Jul 3 00:34:29 2007 -0600
15145 Correct fixup relocation for MPC5xxx
15147 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15149 commit 3649cd99ba815b6601868735765602f00ef3692b
15150 Author: Grant Likely <grant.likely@secretlab.ca>
15151 Date: Tue Jul 3 00:34:24 2007 -0600
15153 Correct relocation fixup for mpc5xx
15155 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15157 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
15158 Author: Grant Likely <grant.likely@secretlab.ca>
15159 Date: Tue Jul 3 00:34:19 2007 -0600
15161 Don't set gd->reloc_off if relocation of .fixup works correctly
15163 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15165 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
15166 Author: Grant Likely <grant.likely@secretlab.ca>
15167 Date: Tue Jul 3 00:34:14 2007 -0600
15169 Remove obsolete mpc83xx linker scripts
15171 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15173 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
15174 Author: Grant Likely <grant.likely@secretlab.ca>
15175 Date: Tue Jul 3 00:34:09 2007 -0600
15177 Consolidate mpc8260 linker scripts
15179 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15181 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
15182 Author: Grant Likely <grant.likely@secretlab.ca>
15183 Date: Tue Jul 3 00:34:04 2007 -0600
15185 Remove obsolete mpc824x linker scripts
15187 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15189 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
15190 Author: Grant Likely <grant.likely@secretlab.ca>
15191 Date: Tue Jul 3 00:33:59 2007 -0600
15193 Remove obsolete mpc824x linker scripts (3 of 4)
15195 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15197 commit a71c084f3ac7fedf144537db2b2da47323068833
15198 Author: Grant Likely <grant.likely@secretlab.ca>
15199 Date: Tue Jul 3 00:33:53 2007 -0600
15201 Remove obsolete mpc824x linker scripts (2 of 4)
15203 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15205 commit f670a15468d1365241d40022b9408e1004181f5e
15206 Author: Grant Likely <grant.likely@secretlab.ca>
15207 Date: Tue Jul 3 00:33:48 2007 -0600
15209 Remove obsolete mpc824x linker scripts (1 of 4)
15211 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15213 commit 09555bd45a04c0e54f172528d21bc18896550d28
15214 Author: Grant Likely <grant.likely@secretlab.ca>
15215 Date: Tue Jul 3 00:33:43 2007 -0600
15217 Remove obsolete mpc8220 linker scripts
15219 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15221 commit 5efb992f046e51225c93d52f80fecbe433abd789
15222 Author: Grant Likely <grant.likely@secretlab.ca>
15223 Date: Tue Jul 3 00:33:38 2007 -0600
15225 Remove obsolete mpc5xxx linker scripts (3 of 3)
15227 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15229 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
15230 Author: Grant Likely <grant.likely@secretlab.ca>
15231 Date: Tue Jul 3 00:33:33 2007 -0600
15233 Remove obsolete mpc5xxx linker scripts (2 of 3)
15235 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15237 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
15238 Author: Grant Likely <grant.likely@secretlab.ca>
15239 Date: Tue Jul 3 00:33:28 2007 -0600
15241 Remove obsolete mpc5xxx linker scripts (1 of 3)
15243 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15245 commit b7d8e05f8675249b5f208aa73babeed384a4519d
15246 Author: Grant Likely <grant.likely@secretlab.ca>
15247 Date: Tue Jul 3 00:33:23 2007 -0600
15249 Remove obsolete mpc5xx linker scripts
15251 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15253 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
15254 Author: Grant Likely <grant.likely@secretlab.ca>
15255 Date: Tue Jul 3 00:33:18 2007 -0600
15257 Consolidate mpc83xx linker scripts
15259 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15261 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
15262 Author: Grant Likely <grant.likely@secretlab.ca>
15263 Date: Tue Jul 3 00:33:13 2007 -0600
15265 Consolidate mpc8260 linker scripts
15267 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15269 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
15270 Author: Grant Likely <grant.likely@secretlab.ca>
15271 Date: Tue Jul 3 00:33:08 2007 -0600
15273 Consolidate mpc824x linker scripts
15275 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15277 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
15278 Author: Grant Likely <grant.likely@secretlab.ca>
15279 Date: Tue Jul 3 00:33:03 2007 -0600
15281 Consolidate mpc8220 linker scripts
15283 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15285 commit d181c9a15cd41863fe24840d17848429f27d3c8c
15286 Author: Grant Likely <grant.likely@secretlab.ca>
15287 Date: Tue Jul 3 00:32:58 2007 -0600
15289 Consolidate mpc5xxx linker scripts
15291 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15293 commit 287ac924adb7291bebe5086652a362a30ab28b13
15294 Author: Grant Likely <grant.likely@secretlab.ca>
15295 Date: Tue Jul 3 00:32:53 2007 -0600
15297 Consolidate mpc5xx linker scripts
15299 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15301 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
15302 Author: Wolfgang Denk <wd@denx.de>
15303 Date: Wed Jul 4 00:43:53 2007 +0200
15305 Fix a few file permission problems.
15307 Signed-off-by: Wolfgang Denk <wd@denx.de>
15309 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
15310 Author: Wolfgang Denk <wd@denx.de>
15311 Date: Wed Jul 4 00:38:38 2007 +0200
15313 Minor coding style cleanup. Rebuild CHANGELOG file.
15315 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
15316 Author: Jon Loeliger <jdl@jdl.com>
15317 Date: Mon Jun 11 19:03:44 2007 -0500
15319 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
15321 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15323 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
15324 Author: Jon Loeliger <jdl@jdl.com>
15325 Date: Mon Jun 11 19:03:39 2007 -0500
15327 README: Rewrite command line config to use CONFIG_CMD_* names.
15329 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15331 commit 72a074cec68e5bad60d63206c050974e08afd804
15332 Author: Jon Loeliger <jdl@jdl.com>
15333 Date: Mon Jun 11 19:03:34 2007 -0500
15335 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15337 This is a compatibility step that allows both the older form
15338 and the new form to co-exist for a while until the older can
15339 be removed entirely.
15341 All transformations are of the form:
15343 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15345 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15347 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15349 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
15350 Author: Jon Loeliger <jdl@jdl.com>
15351 Date: Mon Jun 11 19:03:28 2007 -0500
15353 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15355 This is a compatibility step that allows both the older form
15356 and the new form to co-exist for a while until the older can
15357 be removed entirely.
15359 All transformations are of the form:
15361 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15363 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15365 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15367 commit 9107ebe0d352420895ab69b715697bdebc8caf50
15368 Author: Jon Loeliger <jdl@jdl.com>
15369 Date: Mon Jun 11 19:03:23 2007 -0500
15371 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15373 This is a compatibility step that allows both the older form
15374 and the new form to co-exist for a while until the older can
15375 be removed entirely.
15377 All transformations are of the form:
15379 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15381 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15383 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15385 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
15386 Author: Jon Loeliger <jdl@jdl.com>
15387 Date: Mon Jun 11 19:03:19 2007 -0500
15389 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15391 This is a compatibility step that allows both the older form
15392 and the new form to co-exist for a while until the older can
15393 be removed entirely.
15395 All transformations are of the form:
15397 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15399 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15401 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15403 commit 737184114ec9c9e0ab94d6713536126073bd2472
15404 Author: Jon Loeliger <jdl@jdl.com>
15405 Date: Mon Jun 11 19:03:15 2007 -0500
15407 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15409 This is a compatibility step that allows both the older form
15410 and the new form to co-exist for a while until the older can
15411 be removed entirely.
15413 All transformations are of the form:
15415 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15417 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15421 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
15422 Author: Jon Loeliger <jdl@jdl.com>
15423 Date: Mon Jun 11 19:03:08 2007 -0500
15425 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15427 This is a compatibility step that allows both the older form
15428 and the new form to co-exist for a while until the older can
15429 be removed entirely.
15431 All transformations are of the form:
15433 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15435 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15437 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15439 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
15440 Author: Jon Loeliger <jdl@jdl.com>
15441 Date: Mon Jun 11 19:03:03 2007 -0500
15443 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15445 This is a compatibility step that allows both the older form
15446 and the new form to co-exist for a while until the older can
15447 be removed entirely.
15449 All transformations are of the form:
15451 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15453 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15455 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15457 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
15458 Author: Jon Loeliger <jdl@jdl.com>
15459 Date: Mon Jun 11 19:02:58 2007 -0500
15461 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15463 This is a compatibility step that allows both the older form
15464 and the new form to co-exist for a while until the older can
15465 be removed entirely.
15467 All transformations are of the form:
15469 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15471 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15473 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15475 commit 98b79003c21c2578206003256de4e781d6b36ca8
15476 Author: Jon Loeliger <jdl@jdl.com>
15477 Date: Mon Jun 11 19:02:53 2007 -0500
15479 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15481 This is a compatibility step that allows both the older form
15482 and the new form to co-exist for a while until the older can
15483 be removed entirely.
15485 All transformations are of the form:
15487 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15489 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15491 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15493 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
15494 Author: Jon Loeliger <jdl@jdl.com>
15495 Date: Mon Jun 11 19:02:49 2007 -0500
15497 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15499 This is a compatibility step that allows both the older form
15500 and the new form to co-exist for a while until the older can
15501 be removed entirely.
15503 All transformations are of the form:
15505 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15507 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15509 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15511 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
15512 Author: Jon Loeliger <jdl@jdl.com>
15513 Date: Mon Jun 11 19:02:34 2007 -0500
15515 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15517 This is a compatibility step that allows both the older form
15518 and the new form to co-exist for a while until the older can
15519 be removed entirely.
15521 All transformations are of the form:
15523 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15525 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15527 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15529 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
15530 Author: Jon Loeliger <jdl@jdl.com>
15531 Date: Mon Jun 11 19:02:20 2007 -0500
15533 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15535 This is a compatibility step that allows both the older form
15536 and the new form to co-exist for a while until the older can
15537 be removed entirely.
15539 All transformations are of the form:
15541 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15543 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15545 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15547 commit d5be43de93ff905c465e509d45a3164ef48d26e7
15548 Author: Jon Loeliger <jdl@jdl.com>
15549 Date: Mon Jun 11 19:02:10 2007 -0500
15551 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15553 This is a compatibility step that allows both the older form
15554 and the new form to co-exist for a while until the older can
15555 be removed entirely.
15557 All transformations are of the form:
15559 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15561 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15563 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15565 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
15566 Author: Jon Loeliger <jdl@jdl.com>
15567 Date: Mon Jun 11 19:02:05 2007 -0500
15569 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15571 This is a compatibility step that allows both the older form
15572 and the new form to co-exist for a while until the older can
15573 be removed entirely.
15575 All transformations are of the form:
15577 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15579 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15581 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15583 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
15584 Author: Jon Loeliger <jdl@jdl.com>
15585 Date: Mon Jun 11 19:01:54 2007 -0500
15587 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15589 This is a compatibility step that allows both the older form
15590 and the new form to co-exist for a while until the older can
15591 be removed entirely.
15593 All transformations are of the form:
15595 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15597 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15601 commit a76adc8142c1d956385a109e0b70f9319ede4d66
15602 Author: Jon Loeliger <jdl@jdl.com>
15603 Date: Mon Jun 11 19:01:43 2007 -0500
15605 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
15607 This is a compatibility step that allows both the older form
15608 and the new form to co-exist for a while until the older can
15609 be removed entirely.
15611 All transformations are of the form:
15613 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
15615 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
15617 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15619 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
15620 Author: Jon Loeliger <jdl@jdl.com>
15621 Date: Mon Jun 11 19:01:34 2007 -0500
15623 Introduce initial versions of new Command Config files.
15625 Derive three new files from cmd_confdefs.h:
15626 config_bootp.h - Has BOOTP related config options, not commands
15627 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
15628 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
15630 For now, include "config_bootp.h" for compatability until all
15631 users of it directly include it properly.
15633 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15635 commit 1f2a05898658900dc5717761e27abf2052e67e13
15636 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
15637 Date: Sat Jun 30 18:50:48 2007 +0200
15641 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
15643 commit a5d71e290f3673269be8eefb4ec44f53412f9461
15644 Author: Heiko Schocher <hs@pollux.denx.de>
15645 Date: Mon Jun 25 19:11:37 2007 +0200
15647 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
15649 Signed-off-by: Heiko Schocher <hs@denx.de>
15651 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
15652 Author: Niklaus Giger <niklaus.giger@nestal.com>
15653 Date: Mon Jun 25 17:03:13 2007 +0200
15655 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
15657 This patch prints the DDR status registers upon machine check
15658 interrupt on the 440EPx/GRx. This can be useful especially when
15659 ECC support is enabled.
15661 I added some small changes to the original patch from Niklaus to
15662 make it compile clean.
15664 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
15665 Signed-off-by: Stefan Roese <sr@denx.de>
15667 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
15668 Author: Niklaus Giger <niklaus.giger@nestal.com>
15669 Date: Mon Jun 25 16:50:55 2007 +0200
15671 ppc4xx: Fix O=buildir builds
15673 This patch fixes the problem to assemble cpu/ppc4xx/start.S
15674 experienced last week where building failed having specified
15675 O=../build.sequoia.
15677 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
15679 commit 466fff1a7bb5fe764a06450626f6098219f446b8
15680 Author: Stefan Roese <sr@denx.de>
15681 Date: Mon Jun 25 15:57:39 2007 +0200
15683 ppc4xx: Add pci_pre_init() for 405 boards
15685 This patch removes the CFG_PCI_PRE_INIT option completely, since
15686 it's not needed anymore with the patch from Matthias Fuchs with
15687 the "weak" pci_pre_init() implementation.
15689 Signed-off-by: Stefan Roese <sr@denx.de>
15691 commit 6f35c53166213c24a5a0e2390ed861136ff73870
15692 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15693 Date: Sun Jun 24 17:41:21 2007 +0200
15695 ppc4xx: Maintenance patch for esd's CPCI405 derivats
15697 -add pci_pre_init() for pci interrupt fixup code
15698 -disable phy sleep mode via reset_phy() function
15699 -use correct io accessors
15702 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15704 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
15705 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15706 Date: Sun Jun 24 17:23:41 2007 +0200
15708 ppc4xx: Add pci_pre_init() for 405 boards
15710 This patch adds support for calling a plattform dependant
15711 pci_pre_init() function for 405 boards. This can be used to
15712 move the current pci_405gp_fixup_irq() function into the
15715 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
15716 A default function with 'weak' attribute is used when
15717 a board specific pci_pre_init() is not implemented.
15719 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15721 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
15722 Author: Wolfgang Denk <wd@denx.de>
15723 Date: Fri Jun 22 23:59:00 2007 +0200
15725 Coding stylke cleanup; rebuild CHANGELOG
15727 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
15728 Author: Igor Lisitsin <igor@emcraft.com>
15729 Date: Wed Apr 18 14:55:19 2007 +0400
15731 Adapt log buffer code to support Linux 2.6
15733 A new environment variable, "logversion", selects the log buffer
15734 behaviour. If it is not set or set to a value other than 2, then the
15735 old, Linux 2.4.4, behaviour is selected.
15737 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
15740 commit a11e06965ec91270c51853407ff1261d3c740386
15741 Author: Igor Lisitsin <igor@emcraft.com>
15742 Date: Wed Mar 28 19:06:19 2007 +0400
15744 Extend POST support for PPC440
15746 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
15748 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
15751 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
15752 Author: Heiko Schocher <hs@pollux.denx.de>
15753 Date: Fri Jun 22 19:11:54 2007 +0200
15755 [PCS440EP] upgrade the PCS440EP board:
15756 - Show on the Status LEDs, some States of the board.
15757 - Get the MAC addresses from the EEProm
15759 - use the CF on the board.
15760 - check the U-Boot image in the Flash with a SHA1
15762 - use dynamic TLB entries generation for the SDRAM
15764 Signed-off-by: Heiko Schocher <hs@denx.de>
15766 commit 3a1f5c81b0b9557817a789bece839905581c2205
15767 Author: Stefan Roese <sr@denx.de>
15768 Date: Fri Jun 22 16:58:40 2007 +0200
15770 ppc4xx: Fix problem with extended program_tlb() funtion
15772 The recently extended program_tlb() function had a problem when
15773 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
15774 virtual address was not incremented. This patch fixes this issue
15775 and is tested on Katmai with 512MB SDRAM.
15777 Signed-off-by: Stefan Roese <sr@denx.de>
15779 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
15780 Author: Rafal Jaworowski <raj@semihalf.com>
15781 Date: Fri Jun 22 14:58:04 2007 +0200
15783 [ppc] Fix build breakage for all non-4xx PowerPC variants.
15785 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
15786 - minor 4xx cleanup
15788 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
15789 Author: Mike Frysinger <vapier@gentoo.org>
15790 Date: Fri Jun 22 10:34:12 2007 +0200
15792 [patch] add nand_init() prototype to nand.h
15794 since nand_init() is expected to be called by other parts of u-boot, there
15795 should be a prototype for it in nand.h
15797 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15798 Signed-off-by: Stefan Roese <sr@denx.de>
15800 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
15801 Author: Wolfgang Denk <wd@denx.de>
15802 Date: Wed Jun 20 18:14:24 2007 +0200
15804 Coding style cleanup. Refresh CHANGELOG.
15806 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
15807 Author: Stefan Roese <sr@denx.de>
15808 Date: Tue Jun 19 17:22:44 2007 +0200
15810 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
15812 This patch adds a board command to configure the I2C bootstrap EEPROM
15813 values. Right now 533 and 667MHz are supported for booting either via NOR
15814 or NAND FLASH. Here the usage:
15816 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
15817 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
15819 Signed-off-by: Stefan Roese <sr@denx.de>
15821 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
15822 Author: Stefan Roese <sr@denx.de>
15823 Date: Tue Jun 19 16:42:31 2007 +0200
15825 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
15827 The latest changes showed a problem with the location of the NAND-SPL
15828 image in the OCM and the init-data area (incl. cache). This patch
15829 fixes this problem.
15831 Signed-off-by: Stefan Roese <sr@denx.de>
15833 commit 86ba99e34194394052d24c04dc40d1263d29a26f
15834 Author: Stefan Roese <sr@denx.de>
15835 Date: Tue Jun 19 16:40:58 2007 +0200
15837 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
15839 Signed-off-by: Stefan Roese <sr@denx.de>
15841 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
15842 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15843 Date: Mon Jun 18 13:50:13 2007 -0500
15845 Added M5329AFEE and M5329BFEE Platforms
15847 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
15848 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
15849 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
15852 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
15853 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
15854 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
15855 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
15856 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
15857 lib_m68k/time.c, net/eth.c and rtc/Makefile
15859 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15861 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
15862 Author: Michal Simek <monstr@monstr.eu>
15863 Date: Sun Jun 17 19:04:11 2007 +0200
15865 [fix] email reparation
15867 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
15868 Author: Michal Simek <monstr@monstr.eu>
15869 Date: Sun Jun 17 19:03:21 2007 +0200
15871 [FIX] fix microblaze file permitission
15873 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
15874 Author: Stefan Roese <sr@denx.de>
15875 Date: Fri Jun 15 11:33:41 2007 +0200
15877 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
15879 Now CONFIG_440 has to be defined in all PPC440 board config files.
15881 Signed-off-by: Stefan Roese <sr@denx.de>
15883 commit efa35cf12d914d4caba942acd5a6c45f217de302
15884 Author: Grzegorz Bernacki <gjb@semihalf.com>
15885 Date: Fri Jun 15 11:19:28 2007 +0200
15887 ppc4xx: Clean up 440 exceptions handling
15889 - Introduced dedicated switches for building 440 and 405 images required
15890 for 440-specific machine instructions like 'rfmci' etc.
15892 - Exception vectors moved to the proper location (_start moved away from
15893 the critical exception handler space, which it occupied)
15895 - CriticalInput now serviced (with default handler)
15897 - MachineCheck properly serviced (added a dedicated handler and return
15900 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
15901 unhandled and those not relevant for 4xx were eliminated)
15903 - Eliminated Linux leftovers, removed dead code
15905 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15906 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
15907 Signed-off-by: Stefan Roese <sr@denx.de>
15909 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
15910 Author: Stefan Roese <sr@denx.de>
15911 Date: Fri Jun 15 08:18:01 2007 +0200
15913 [ppc4xx] Add initial lwmon5 board support
15915 This patch adds initial support for the Liebherr lwmon5 board euqipped
15916 with an AMCC 440EPx PowerPC.
15918 Signed-off-by: Stefan Roese <sr@denx.de>
15920 commit 85f737376d5ff3d5f0d45a8b657686326d175307
15921 Author: Stefan Roese <sr@denx.de>
15922 Date: Fri Jun 15 07:39:43 2007 +0200
15924 [ppc4xx] Extend 44x GPIO setup with default output state
15926 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
15927 is extended with the default GPIO output state (level).
15929 Signed-off-by: Stefan Roese <sr@denx.de>
15931 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
15932 Author: Stefan Roese <sr@denx.de>
15933 Date: Thu Jun 14 11:14:32 2007 +0200
15935 [ppc4xx] Extend program_tlb() with virtual & physical addresses
15937 Now program_tlb() allows to program a TLB (or multiple) with
15938 different virtual and physical addresses. With this change, now one
15939 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
15940 diabled and once with caches enabled.
15942 Signed-off-by: Stefan Roese <sr@denx.de>
15944 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
15945 Author: Detlev Zundel <dzu@denx.de>
15946 Date: Wed May 23 19:02:41 2007 +0200
15948 Change 'repeatable' attribute of some commands to sensible values.
15950 Most prominently this changes 'erase' to be non-repeatable.
15952 Signed-off-by: Detlev Zundel <dzu@denx.de>
15954 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
15955 Author: Detlev Zundel <dzu@denx.de>
15956 Date: Wed May 23 18:47:48 2007 +0200
15958 Fix 'run' not to continue after interrupted command
15960 Signed-off-by: Detlev Zundel <dzu@denx.de>
15962 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
15963 Author: Jason Jin <Jason.jin@freescale.com>
15964 Date: Mon Jun 11 15:14:24 2007 +0200
15966 USB: This patch fix readl in ohci swap reg access.
15968 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15970 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
15971 Author: Bartlomiej Sieka <tur@semihalf.com>
15972 Date: Fri Jun 8 14:52:22 2007 +0200
15974 TQM5200: Add Flat Device Tree support, update default env. accordingly.
15976 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
15977 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15979 commit 9045f33c023f698660a2e45d1b2194c0711abebc
15980 Author: Wolfgang Denk <wd@denx.de>
15981 Date: Fri Jun 8 10:24:58 2007 +0200
15983 Fix config problems on SC3 board; make ide_reset_timeout work.
15985 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
15986 Author: Benoît Monin <bmonin@adeneo.eu>
15987 Date: Fri Jun 8 09:55:24 2007 +0200
15989 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
15991 Set the correct value in GPIOx_TCR when configuring the gpio
15992 with CFG_440_GPIO_TABLE.
15994 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
15995 Signed-off-by: Stefan Roese <sr@denx.de>
15997 commit f539edc076cfe52bff919dd512ba8d7af0e22092
15998 Author: Vadim Bendebury <vbendeb@google.com>
15999 Date: Thu May 24 15:52:25 2007 -0700
16001 cosmetic changes to bcm570x driver
16003 This is a cosmetic only changes submission.
16004 It affects files relevant to bcm570x driver.
16005 the commands used to generate this change was
16008 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
16010 The BMW target (the only one using this chip so far) builds cleanly, the
16011 `before and after' generated object files for drivers/bcm570x.c and
16012 drivers/tigon3.o are identical as reported by objdump -d
16014 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
16015 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16017 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
16018 Author: Wolfgang Denk <wd@denx.de>
16019 Date: Wed Jun 6 16:26:56 2007 +0200
16021 Coding Style cleanup; generate new CHANGELOG file.
16023 Signed-off-by: Wolfgang Denk <wd@denx.de>
16025 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
16026 Author: Markus Klotzbuecher <mk@denx.de>
16027 Date: Wed Jun 6 11:49:44 2007 +0200
16029 TRAB, USB: update trab board configuration for use of generic ohci driver
16031 commit dace45acd1c1357daa9322099d07c9a9e08b0024
16032 Author: Markus Klotzbuecher <mk@denx.de>
16033 Date: Wed Jun 6 11:49:43 2007 +0200
16035 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
16037 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
16038 Author: Markus Klotzbuecher <mk@denx.de>
16039 Date: Wed Jun 6 11:49:43 2007 +0200
16041 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
16043 commit fc43be478f2aa37ce38acd85355038866e4162af
16044 Author: Markus Klotzbuecher <mk@denx.de>
16045 Date: Wed Jun 6 11:49:35 2007 +0200
16047 USB/OHCI: endianness cleanup in the generic ohci driver
16049 commit c440bfe6d6d92d66478a7e84402b31f48413617b
16050 Author: Stefan Roese <sr@denx.de>
16051 Date: Wed Jun 6 11:42:13 2007 +0200
16053 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
16055 This patch adds NAND booting support for the AMCC Acadia eval board.
16057 Please make sure to configure jumper J7 to position 2-3 when booting
16058 from NOR, and to position 1-2 when booting for NAND.
16060 I also added a board command to configure the I2C bootstrap EEPROM
16061 values. Right now only 267MHz is support for booting either via NOR
16062 or NAND FLASH. Here the usage:
16064 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
16065 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
16067 Signed-off-by: Stefan Roese <sr@denx.de>
16069 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
16070 Author: Rodolfo Giometti <giometti@linux.it>
16071 Date: Wed Jun 6 10:08:14 2007 +0200
16073 Files include/linux/byteorder/{big,little}_endian.h define
16074 __BIG_ENDIAN and __LITTLE_ENDIAN.
16076 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
16078 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
16079 Author: Zhang Wei <wei.zhang@freescale.com>
16080 Date: Wed Jun 6 10:08:14 2007 +0200
16082 Add USB PCI-OHCI, USB keyboard and event poll support to the
16083 MPC8641HPCN board config file.
16085 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
16087 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
16088 Author: Zhang Wei <wei.zhang@freescale.com>
16089 Date: Wed Jun 6 10:08:14 2007 +0200
16091 USB PCI-OHCI, interrupt pipe and usb event poll support
16093 This patch added USB PCI-OHCI chips support, interrupt pipe support
16094 and usb event poll support. For supporting the USB interrupt pipe, the
16095 globe urb_priv is moved to purb in ed struct. Now, we can process
16096 several urbs at one time. The interrupt pipe support codes are ported
16097 from Linux kernel 2.4.
16099 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
16101 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
16102 Author: Zhang Wei <wei.zhang@freescale.com>
16103 Date: Wed Jun 6 10:08:13 2007 +0200
16105 USB event poll support
16107 This patch adds USB event poll support, which could be used in usbkbd
16108 and other usb devices driver when the asynchronous interrupt
16109 processing is supported.
16111 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
16113 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
16114 Author: Rodolfo Giometti <giometti@linux.it>
16115 Date: Wed Jun 6 10:08:12 2007 +0200
16117 ISP116x: delay for crappy USB keys
16119 Using some (very) slow USB keys cause the USB host controller buffers
16120 are not ready to be read by the CPU so we need an extra delay before
16121 reading the USB storage data.
16123 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
16125 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
16126 Author: Markus Klotzbuecher <mk@denx.de>
16127 Date: Wed Jun 6 10:08:12 2007 +0200
16129 Change duplicate usb_cpu_init_fail to usb_board_init_fail
16131 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
16134 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16136 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
16137 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16138 Date: Tue Jun 5 12:30:52 2007 -0500
16140 mpc8641 image size cleanup
16142 e600 does not have a bootpg restriction.
16143 Move the version string to beginning of image at fff00000.
16144 Resetvec.S is not needed.
16145 Update flash copy instructions.
16146 Add tftpflash env variable
16148 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16149 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16151 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
16152 Author: Benoît Monin <bmonin@adeneo.eu>
16153 Date: Mon Jun 4 08:36:05 2007 +0200
16155 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
16157 The attached patch is mainly cosmetic, allowing u-boot to
16158 display the correct bootstrap option letter according to the
16161 The original patch was extended with 405EZ support by Stefan
16164 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
16165 Signed-off-by: Stefan Roese <sr@denx.de>
16167 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
16168 Author: Nikita V. Youshchenko <yoush@debian.org>
16169 Date: Wed May 23 12:45:19 2007 +0400
16171 fix compilation problem for mpc8349itx CFG_RAMBOOT
16173 Current include/configs/MPC8349ITX.h does contain some support for building
16174 image that will be started from memory (without putting in into flash).
16175 It could be triggered by building with TEXT_BASE set to a low value.
16177 However, this support is incomplete: using of low TEXT_BASE causes
16178 defining configuration macros in inconsistent way, which later leads
16179 to compilation errors. In particular. flash support is being disabled,
16180 but then flash structures get referenced.
16182 This patch fixes this, making it possible to build with low TEXT_BASE.
16184 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
16186 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16188 commit 8a364f0970de49949d635e60accf463c6443ef8c
16189 Author: Nikita V. Youshchenko <yoush@debian.org>
16190 Date: Wed May 23 12:45:25 2007 +0400
16192 add missing 'console' var to default mpc8349itx config
16194 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16196 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
16197 Author: Stefan Roese <sr@denx.de>
16198 Date: Fri Jun 1 16:18:17 2007 +0200
16200 ppc4xx: Add missing file for Bamboo NAND booting support
16202 Signed-off-by: Stefan Roese <sr@denx.de>
16204 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
16205 Author: Stefan Roese <sr@denx.de>
16206 Date: Fri Jun 1 15:58:19 2007 +0200
16208 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
16210 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
16211 suggested by AMCC it is not recommended to dynamically change the EBC
16212 speed after bootup. So we undo this change to be on the safe side.
16214 Signed-off-by: Stefan Roese <sr@denx.de>
16216 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
16217 Author: Stefan Roese <sr@denx.de>
16218 Date: Fri Jun 1 15:29:04 2007 +0200
16220 ppc4xx: Update Sequoia NAND booting support with ECC
16222 Signed-off-by: Stefan Roese <sr@denx.de>
16224 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
16225 Author: Stefan Roese <sr@denx.de>
16226 Date: Fri Jun 1 15:27:11 2007 +0200
16228 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
16230 This patch adds NAND booting support for the AMCC Bamboo eval board.
16231 Since the NAND-SPL boot image is limited to 4kbytes, this version
16232 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
16233 supported, since the setup code for I2C DIMM autodetection and
16234 configuration is too big for this NAND bootloader.
16236 Signed-off-by: Stefan Roese <sr@denx.de>
16238 commit 42be56f53c8b107868e6125c8524ae84293e95a7
16239 Author: Stefan Roese <sr@denx.de>
16240 Date: Fri Jun 1 15:23:04 2007 +0200
16242 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
16244 The U-Boot NAND booting support is now extended to support ECC
16245 upon loading of the NAND U-Boot image.
16247 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
16249 Signed-off-by: Stefan Roese <sr@denx.de>
16251 commit a471db07fbb65a841ffc9f4f112562b945230f98
16252 Author: Stefan Roese <sr@denx.de>
16253 Date: Fri Jun 1 15:19:29 2007 +0200
16255 ppc4xx: Prepare Bamboo port for NAND booting support
16257 This patch updates the "normal" Bamboo NOR booting port, so
16258 that it is compatible with the coming soon NAND booting
16261 It also enables the 2nd NAND flash on the Bamboo.
16263 Signed-off-by: Stefan Roese <sr@denx.de>
16265 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
16266 Author: Stefan Roese <sr@denx.de>
16267 Date: Fri Jun 1 15:16:58 2007 +0200
16269 ppc4xx: Update in_be32() functions and friends to latest Linux version
16271 Signed-off-by: Stefan Roese <sr@denx.de>
16273 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
16274 Author: Stefan Roese <sr@denx.de>
16275 Date: Fri Jun 1 15:15:12 2007 +0200
16277 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
16279 This patch adds hardware ECC support to the NDFC driver. It also
16280 changes the register access from using the "simple" in32/out32
16281 functions to the in_be32/out_be32 functions, which make sure
16282 that the access is correctly synced. This is the only recommended
16283 access to SoC registers in the current Linux kernel.
16285 Signed-off-by: Stefan Roese <sr@denx.de>
16287 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
16288 Author: Stefan Roese <sr@denx.de>
16289 Date: Fri Jun 1 15:12:15 2007 +0200
16291 NAND: Update nand_ecc.c to latest Linux version
16293 This patch updates the nand_ecc code to the latest Linux version.
16294 The main reason for this is the more compact code. This makes
16295 it possible to include the ECC code into the NAND bootloader
16296 image (NAND_SPL) for PPC4xx.
16298 Signed-off-by: Stefan Roese <sr@denx.de>
16300 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
16301 Author: Stefan Roese <sr@denx.de>
16302 Date: Fri Jun 1 15:09:50 2007 +0200
16304 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
16306 Signed-off-by: Stefan Roese <sr@denx.de>
16308 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
16309 Author: Stefan Roese <sr@denx.de>
16310 Date: Fri Jun 1 13:45:24 2007 +0200
16312 ppc4xx: Change Luan config file to support ECC
16314 With the updated 44x DDR2 driver the Luan board now supports
16315 ECC generation and checking.
16317 Signed-off-by: Stefan Roese <sr@denx.de>
16319 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
16320 Author: Stefan Roese <sr@denx.de>
16321 Date: Fri Jun 1 13:45:00 2007 +0200
16323 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
16325 Add config option for 180 degree advance clock control as needed
16326 for the AMCC Luan eval board.
16328 Signed-off-by: Stefan Roese <sr@denx.de>
16330 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
16331 Author: Wolfgang Denk <wd@denx.de>
16332 Date: Thu May 31 17:20:09 2007 +0200
16334 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
16336 Signed-off-by: Wolfgang Denk <wd@denx.de>
16338 commit 7049288fb1f16f1b317140226cdebd07bd416395
16339 Author: Bartlomiej Sieka <tur@semihalf.com>
16340 Date: Sun May 27 17:26:46 2007 +0200
16342 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
16344 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16346 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
16347 Author: Bartlomiej Sieka <tur@semihalf.com>
16348 Date: Sun May 27 17:06:36 2007 +0200
16350 Motion-PRO: Add support for redundant environment.
16352 Enable redundant environment, add a MTD partition for it; also add env.
16353 variable command for passing MTD partitions to the kernel command line.
16355 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16356 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16358 commit a26eabeec31746f06d309103690892805696e344
16359 Author: Bartlomiej Sieka <tur@semihalf.com>
16360 Date: Sun May 27 17:05:11 2007 +0200
16362 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
16364 Allow passing longer command line to the kernel - useful especially
16365 for passing MTD partition layout.
16367 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16368 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16370 commit 9160b96f71483a116de81c68985e8ee306d36764
16371 Author: Bartlomiej Sieka <tur@semihalf.com>
16372 Date: Sun May 27 17:04:18 2007 +0200
16374 Fix: Add missing NULL termination in strings expanded by macros parser.
16376 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16377 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16379 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
16380 Author: Bartlomiej Sieka <tur@semihalf.com>
16381 Date: Sun May 27 17:03:37 2007 +0200
16383 Motion-PRO: Update EEPROM's page write bits and write delay.
16385 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
16386 have a page write capability of two bytes", and "This device offers fast (1ms)
16387 byte write". Add 3ms of extra delay.
16389 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16390 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16392 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
16393 Author: Bartlomiej Sieka <tur@semihalf.com>
16394 Date: Sun May 27 16:58:45 2007 +0200
16396 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
16398 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
16399 networking does not function. This commit switches PHY to TX mode by clearing
16400 the FX_SEL bit of Mode Control Register. It also reverses commit
16401 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
16403 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16404 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16406 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
16407 Author: Bartlomiej Sieka <tur@semihalf.com>
16408 Date: Sun May 27 16:57:15 2007 +0200
16410 Motion-PRO: Add support for the temperature sensor.
16412 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16413 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16415 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
16416 Author: Bartlomiej Sieka <tur@semihalf.com>
16417 Date: Sun May 27 16:55:23 2007 +0200
16419 Motion-PRO: Add displaying of CPLD revision information during boot.
16421 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
16422 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16424 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
16425 Author: Bartlomiej Sieka <tur@semihalf.com>
16426 Date: Sun May 27 16:53:43 2007 +0200
16428 MPC5xxx: Change names of defines related to IPB and PCI clocks.
16430 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
16431 them does not cause PCI or IPB clocks to run at the specified speed.
16432 Instead, they configure divisors used to calculate said clocks. This
16433 patch renames the defines according to their real function.
16435 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16436 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16438 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
16439 Author: Bartlomiej Sieka <tur@semihalf.com>
16440 Date: Sun May 27 16:51:48 2007 +0200
16442 Motion-PRO: Add LED support.
16444 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
16445 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
16446 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
16448 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
16449 Author: Ulf Samuelsson <ulf@atmel.com>
16450 Date: Thu May 24 12:12:47 2007 +0200
16452 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
16454 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
16455 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16456 Signed-off-by: Stefan Roese <sr@denx.de>
16458 commit d756894722c888d09a9fa1df8323753772d3dcce
16459 Author: Stefan Roese <sr@denx.de>
16460 Date: Thu May 24 09:49:00 2007 +0200
16462 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
16464 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
16465 fixes a small bug in the 405EZ OCM initialization. Thanks for
16468 Signed-off-by: Stefan Roese <sr@denx.de>
16470 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
16471 Author: Stefan Roese <sr@denx.de>
16472 Date: Thu May 24 08:22:09 2007 +0200
16474 ppc4xx: Update AMCC Acadia support for board revision 1.1
16476 This patch updates the Acadia (405EZ) support for the new 1.1 board
16477 revision. It also adds support for NAND FLASH via the 4xx NDFC.
16479 Please note that the jumper J7 must be in position 2-3 for this
16480 NAND support. Position 1-2 is for NAND booting only. NAND booting
16481 support will follow later.
16483 Signed-off-by: Stefan Roese <sr@denx.de>
16485 commit 822d55365bb557e084d0e33625a6dedcc866110b
16486 Author: Jon Loeliger <jdl@freescale.com>
16487 Date: Wed May 23 14:09:46 2007 -0500
16489 Add LIST_86xx MAKEALL target for PowerPC builds.
16491 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16493 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
16494 Author: Stefan Roese <sr@denx.de>
16495 Date: Tue May 22 12:48:09 2007 +0200
16497 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
16499 Signed-off-by: Stefan Roese <sr@denx.de>
16501 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
16502 Author: Stefan Roese <sr@denx.de>
16503 Date: Tue May 22 12:46:10 2007 +0200
16505 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
16507 This patch adds support for 405 PPC's to the 4xx NAND driver
16508 ndfc.c. This is in preparation for the new AMCC 405EZ.
16510 Signed-off-by: Stefan Roese <sr@denx.de>
16512 commit 10603d76767426be803dadd4fb688b97eb69481c
16513 Author: Stefan Roese <sr@denx.de>
16514 Date: Mon May 21 07:41:22 2007 +0200
16516 ppc4xx: Fix problem in 405EZ OCM initialization
16518 As spotted by Bruce Adler this patch fixes an initialization problem
16521 Signed-off-by: Stefan Roese <sr@denx.de>
16523 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
16524 Author: Peter Pearse <peter.pearse@arm.com>
16525 Date: Fri May 18 16:47:03 2007 +0100
16527 Reduce line lengths to 80 characters max.
16529 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
16530 Author: Peter Pearse <peter.pearse@arm.com>
16531 Date: Fri May 18 14:34:07 2007 +0100
16533 Makefile permissions
16535 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
16536 Author: Peter Pearse <peter.pearse@arm.com>
16537 Date: Fri May 18 14:33:11 2007 +0100
16539 Makefile permissions
16541 commit 255a3577c848706441daee0174543efe205a77f8
16542 Author: Kim Phillips <kim.phillips@freescale.com>
16543 Date: Wed May 16 16:52:19 2007 -0500
16545 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
16547 For all practical u-boot purposes, TSECs don't differ throughout the
16548 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
16550 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16552 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
16553 Author: Stefano Babic <sbabic@denx.de>
16554 Date: Wed May 16 14:49:12 2007 +0200
16556 Fix compile problem cause my Microblaze merge
16558 Signed-off-by: Stefano Babic <sbabic@denx.de>
16560 commit ada4697d0230d6da552867777f98a67ec3ba2579
16561 Author: Jeffrey Mann <mannj@embeddedplanet.com>
16562 Date: Wed May 16 13:23:10 2007 +0200
16564 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
16566 Because the Sequoia board does not boot with an EBC faster than 66MHz,
16567 the clock divider are changed after the initial boot process.
16569 This allows for maximum clocking speeds to be achieved on newer boards.
16570 Sequoia boards with 666.66 MHz processors require that the EBC divider
16571 be set to 3 in order to start the initial boot process at a slower EBC
16572 speed. After the initial boot process, the divider can be set back to 2,
16573 which will cause the boards to run at 83.333MHz. This is backward
16574 compatible with boards with 533.33 MHz processors, as these boards will
16575 already be set with an EBC divider of 2.
16577 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16579 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
16580 Author: Wolfgang Denk <wd@denx.de>
16581 Date: Wed May 16 01:16:53 2007 +0200
16583 Minor Coding Style cleanup, update CHANGELOG.
16585 Signed-off-by: Wolfgang Denk <wd@denx.de>
16587 commit d62f64cc23a940eafe712c776b3249e4160753d1
16588 Author: Wolfgang Denk <wd@denx.de>
16589 Date: Wed May 16 00:13:33 2007 +0200
16591 Coding Style Cleanup, new CHANGELOG
16593 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
16594 Author: Wolfgang Denk <wd@denx.de>
16595 Date: Tue May 15 23:38:05 2007 +0200
16597 Minor coding style cleanup.
16599 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
16600 Author: mushtaq khan <mushtaq_k@procsys.com>
16601 Date: Fri Apr 20 14:23:02 2007 +0530
16603 Add driver for S-ATA-controller on Intel processors with South
16604 Bridge, ICH-5, ICH-6 and ICH-7.
16608 1. Code is divided in to two files. All functions, which are
16609 controller specific are kept in "drivers/ata_piix.c" file and
16610 functions, which are not controller specific, are kept in
16611 "common/cmd_sata.c" file.
16613 2. Reading and Writing from the S-ATA drive is done using PIO method.
16615 3. Driver can be configured for 48-bit addressing by defining macro
16616 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
16619 4. S-ATA read function is hooked to the File system, commands like
16620 ext2ls and ext2load file can be used. This has been tested.
16622 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
16623 controller and identifies the S-ATA drives connected to it.
16625 6. U-Boot command "sata" is added, which is used to read/write, print
16626 partition table and get info about the drives present. This I have
16627 implemented in same way as "ide" command is implemented in U-Boot.
16629 7. This driver is for S-ATA in native mode.
16631 8. This driver does not support the Native command queuing and
16634 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
16636 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
16637 Author: mushtaq khan <mushtaq_k@procsys.com>
16638 Date: Mon Apr 30 15:57:22 2007 +0530
16640 Fixes bug clearing the bss section for i386
16643 There is a bug in the code of clearing the bss section for processor
16644 i386.(File: cpu/i386/start.S)
16645 In the code, bss_start addr (starting addr of bss section) is put into
16646 the register %eax, but the code which clears the bss section refers to
16647 the addr pointed by %edi.
16649 This patch fixes this bug by putting bss_start into %edi register.
16651 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
16653 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
16654 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
16655 Date: Mon Apr 30 16:47:28 2007 -0500
16657 Add support for BCM5464 Quad Phy
16659 Added support for Broadcom's BCM5464 Quad Phy
16661 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
16663 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
16664 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16665 Date: Wed May 9 08:10:57 2007 +0800
16667 Search the exception table with linear algorithm
16669 Search the exception table with linear algorithm instead of
16670 bisecting algorithm.
16671 Because the exception table might be unsorted.
16673 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16675 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
16676 Author: Aubrey.Li <aubrey.adi@gmail.com>
16677 Date: Mon May 14 11:47:35 2007 +0800
16679 Fix compilation issues on MACOSX
16681 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
16682 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
16684 commit 56fd7162985c412317bbf763a225fba23c64fd31
16685 Author: Stephen Williams <steve@icarus.com>
16686 Date: Tue May 15 07:55:42 2007 -0700
16688 Fix for compile of JSE target
16690 The attached patch fixes the compile of the JSE board in the
16691 denx git as of 14 may 2007. It is an extremely simple patch,
16692 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
16694 Fix to compile JSE against 20070514 git of u-boot
16696 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
16697 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
16698 Date: Sun May 13 21:01:03 2007 +0900
16700 sh: MS7750SE support.
16702 This adds support for the Hitachi MS7750SE.
16704 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16706 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
16707 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
16708 Date: Sun May 13 20:58:00 2007 +0900
16710 sh: First support code of SuperH.
16712 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16714 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
16715 Author: Stefan Roese <sr@denx.de>
16716 Date: Fri May 11 12:01:49 2007 +0200
16718 ppc4xx: Add mtcpr/mfcpr access macros
16720 Signed-off-by: Stefan Roese <sr@denx.de>
16722 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
16723 Author: Stefan Roese <sr@denx.de>
16724 Date: Fri May 11 12:01:06 2007 +0200
16726 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
16728 Signed-off-by: Stefan Roese <sr@denx.de>
16730 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
16731 Author: Piotr Kruszynski <ppk@semihalf.com>
16732 Date: Thu May 10 16:55:52 2007 +0200
16734 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
16737 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
16738 Author: Peter Pearse <peter.pearse@arm.com>
16739 Date: Wed May 9 11:42:44 2007 +0100
16741 Add the board directory for SMN42
16743 commit 160131bf965785419626df6c388729fe0b597992
16744 Author: Peter Pearse <peter.pearse@arm.com>
16745 Date: Wed May 9 11:41:58 2007 +0100
16747 Add the files for the SMN42 board
16749 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
16750 Author: Peter Pearse <peter.pearse@arm.com>
16751 Date: Wed May 9 11:40:34 2007 +0100
16753 Remove the deleted files for the SMN42 patch
16755 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
16756 Author: Peter Pearse <peter.pearse@arm.com>
16757 Date: Wed May 9 11:37:56 2007 +0100
16759 New board SMN42 branch
16761 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
16762 Author: Peter Pearse <peter.pearse@arm.com>
16763 Date: Wed May 9 10:24:38 2007 +0100
16765 Makefile permissions
16767 commit b84289b595731e8851df46e893845cc1322c9b9b
16768 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16769 Date: Tue May 8 14:17:07 2007 -0500
16771 8641hpcn: Fix Makefile after moving pixis to board/freescale.
16773 The OBJTREE != SRCTREE build scenario was broken.
16776 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16777 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16779 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
16780 Author: Michal Simek <monstr@monstr.eu>
16781 Date: Tue May 8 15:57:43 2007 +0200
16783 add: reading special purpose registers
16785 commit 1a50f164beb065f360fbddb76029607d6b099698
16786 Author: Michal Simek <monstr@monstr.eu>
16787 Date: Tue May 8 14:52:52 2007 +0200
16789 add: Microblaze V5 exception handling
16791 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
16792 Author: Michal Simek <monstr@monstr.eu>
16793 Date: Tue May 8 14:39:11 2007 +0200
16795 add: FSL control read and write
16797 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
16798 Author: Piotr Kruszynski <ppk@semihalf.com>
16799 Date: Tue May 8 13:05:44 2007 +0200
16801 [Motion-PRO] Add support for I2C, EEPROM and RTC.
16803 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
16804 Author: Bartlomiej Sieka <tur@semihalf.com>
16805 Date: Tue May 8 10:23:56 2007 +0200
16807 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
16810 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
16811 Author: Bartlomiej Sieka <tur@semihalf.com>
16812 Date: Tue May 8 09:39:12 2007 +0200
16814 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
16815 eliminates networking problems in Linux (timeouts).
16817 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
16818 Author: Bartlomiej Sieka <tur@semihalf.com>
16819 Date: Tue May 8 09:21:57 2007 +0200
16821 [Motion-PRO] Enable Flat Device Tree support and modify default environment
16822 to allow booting of FDT-expecting kernels.
16824 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
16825 Author: Michal Simek <monstr@monstr.eu>
16826 Date: Mon May 7 23:58:31 2007 +0200
16828 new: USE_MSR_INTR support
16830 commit 008861a2f3ef2c062744d733787c7e530a1b8761
16831 Author: Bartlomiej Sieka <tur@semihalf.com>
16832 Date: Mon May 7 22:36:15 2007 +0200
16834 [MPC5xxx] There are networking problems on the Motion-PRO board with
16835 current PHY initalization code (tftp timeouts all the time). This commit
16836 temporarily disables PHY initalization sequence to make the networking
16837 operational, until a fix is found.
16839 commit abca901869c3760b6c5fecb825db6c1d91a78a93
16840 Author: Wolfgang Denk <wd@denx.de>
16841 Date: Mon May 7 22:10:36 2007 +0200
16843 Get rid of duplicated file (see include/configs/sbc8560.h instead)
16845 Signed-off-by: Wolfgang Denk <wd@denx.de>
16847 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
16848 Author: Wolfgang Denk <wd@denx.de>
16849 Date: Mon May 7 22:07:08 2007 +0200
16851 Get rid of duplicated file (see doc/README.SBC8560 instead)
16853 Signed-off-by: Wolfgang Denk <wd@denx.de>
16855 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
16856 Author: Michal Simek <monstr@monstr.eu>
16857 Date: Mon May 7 19:43:10 2007 +0200
16859 fix: read and write MSR - repair number of parameters
16861 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
16862 Author: Jeffrey Mann <mannj@embeddedplanet.com>
16863 Date: Mon May 7 19:42:49 2007 +0200
16865 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
16867 A '3' got cut off in the formatting of the last patch to automatically
16868 change the clock speed of the system clock on sequoia board.
16870 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16871 Signed-off-by: Stefan Roese <sr@denx.de>
16873 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
16874 Author: Michal Simek <monstr@monstr.eu>
16875 Date: Mon May 7 19:33:51 2007 +0200
16877 new: fsl interrupt support
16878 FSL_Has_data is connected to INTC.
16880 commit 792032baa7d625e34c981ab6df521911bd8dc861
16881 Author: Michal Simek <monstr@monstr.eu>
16882 Date: Mon May 7 19:30:12 2007 +0200
16884 fix: interrupt handler
16887 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
16888 Author: Michal Simek <monstr@monstr.eu>
16889 Date: Mon May 7 19:25:08 2007 +0200
16891 fix: remove asm code
16893 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
16894 Author: Michal Simek <monstr@monstr.eu>
16895 Date: Mon May 7 19:12:43 2007 +0200
16897 fix: clean interrupt
16899 commit 42efed6130c8fcf7da881385b5427065d2801757
16900 Author: Michal Simek <monstr@monstr.eu>
16901 Date: Mon May 7 17:22:25 2007 +0200
16903 fix: interrupt handler for multiple sources
16905 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
16906 Author: Michal Simek <monstr@monstr.eu>
16907 Date: Mon May 7 17:11:09 2007 +0200
16909 new: add writing to msr register
16911 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
16912 Author: Markus Klotzbuecher <mk@denx.de>
16913 Date: Mon May 7 16:43:56 2007 +0200
16915 Fix an ancient CHANGELOG conflict
16917 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
16918 Author: Timur Tabi <timur@freescale.com>
16919 Date: Sat May 5 08:12:30 2007 +0200
16921 5xxx: write MAC address to mac-address and local-mac-address
16923 Some device trees have a mac-address property, some have local-mac-address,
16924 and some have both. To support all of these device trees, ftp_cpu_setup()
16925 should write the MAC address to mac-address and local-mac-address, if they
16928 Signed-off-by: Timur Tabi <timur@freescale.com>
16929 Acked-by: Grant Likely <grant.likely@secretlab.ca>
16931 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
16932 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
16933 Date: Sun Apr 29 14:01:54 2007 +0200
16935 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
16937 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
16938 message. Use PVR to distinguish between the two variants, and print proper CPU
16941 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
16942 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16943 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16945 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
16946 Author: Ladislav Michl <ladis@linux-mips.org>
16947 Date: Wed Apr 25 16:01:26 2007 +0200
16949 [PATCH] simplify silent console
16951 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16952 Acked-by: Stefan Roese <sr@denx.de>
16954 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
16955 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16956 Date: Mon Apr 23 15:30:39 2007 +0200
16958 [PATCH] Avoid assigning PCI resources from zero address
16960 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
16961 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
16962 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
16963 sentence about "0" being considered an invalid address) -- so, use a reasonable
16964 starting value of 0x1000 (that's what the most Linux archs are using).
16966 Alternatively, one might have fixed the calls to pci_set_region() individually
16967 (some code even seems to have taken care of this issue) but that would have
16968 been a lot more work. :-)
16970 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16971 Acked-by: Stefan Roese <sr@denx.de>
16973 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
16974 Author: Jeffrey Mann <mannj@embeddedplanet.com>
16975 Date: Mon Apr 23 14:00:11 2007 +0200
16977 [patch] setenv(...) can delete environmentalvariables
16979 update setenv() function so that entering a NULL value for the
16980 variable's value will delete the environmental variable
16982 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16983 Acked-by: Stefan Roese <sr@denx.de>
16985 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
16986 Author: Mike Frysinger <vapier@gentoo.org>
16987 Date: Mon Apr 23 13:54:24 2007 +0200
16989 [patch] use unsigned char in smc91111 driver for mac
16991 the v_mac variable in the smc91111 driver is declared as a signed char ...
16992 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
16993 because when it gets printed out, you get a display like:
16994 0xFFFFFFE0 and that's no good
16996 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16998 commit ffc50f9bb194343c6303517a517708457a5eb6b8
16999 Author: Michal Simek <monstr@monstr.eu>
17000 Date: Sat May 5 18:54:42 2007 +0200
17002 new: FSL and MSR support #2
17004 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
17005 Author: Michal Simek <monstr@monstr.eu>
17006 Date: Sat May 5 18:27:16 2007 +0200
17008 new: FSL and MSR support
17010 commit 2f15278c2eb911c668b4fe562130b78cf554d139
17011 Author: Wolfgang Denk <wd@denx.de>
17012 Date: Sat May 5 18:23:11 2007 +0200
17014 Coding stylke cleanup; update CHANGELOG.
17016 Signed-off-by: Wolfgang Denk <wd@denx.de>
17018 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
17019 Author: Wolfgang Denk <wd@denx.de>
17020 Date: Sat May 5 18:05:02 2007 +0200
17022 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
17024 Signed-off-by: Wolfgang Denk <wd@denx.de>
17026 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
17027 Author: Wolfgang Denk <wd@denx.de>
17028 Date: Sat May 5 17:15:50 2007 +0200
17030 Make "file" command happy with some config.mk files; update CHANGELOG
17032 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
17033 Author: Jeffrey Mann <mannj@embeddedplanet.com>
17034 Date: Sat May 5 08:32:14 2007 +0200
17036 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
17038 The AMCC Secquoia board has been changed in a new revision from using a
17039 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
17040 indicates the difference. This patch reads that bit and uses the correct
17041 clock speed for the board. This code is backward compatable will all
17042 prior boards. All prior boards will be read as 33.000.
17044 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
17045 Signed-off-by: Stefan Roese <sr@denx.de>
17047 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
17048 Author: Stefan Roese <sr@denx.de>
17049 Date: Sat May 5 08:29:01 2007 +0200
17051 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
17053 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
17054 for the 4k NAND boot image so define bus_frequency to 133MHz here
17055 which is save for the refresh counter setup.
17057 Signed-off-by: Stefan Roese <sr@denx.de>
17059 commit 2f550ab976405300f5b07bf2890800840d0aa05f
17060 Author: Timur Tabi <timur@freescale.com>
17061 Date: Sat May 5 08:12:30 2007 +0200
17063 5xxx: write MAC address to mac-address and local-mac-address
17065 Some device trees have a mac-address property, some have local-mac-address,
17066 and some have both. To support all of these device trees, ftp_cpu_setup()
17067 should write the MAC address to mac-address and local-mac-address, if they
17070 Signed-off-by: Timur Tabi <timur@freescale.com>
17071 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17073 commit a79886590593ba1d667c840caa4940c61639f18f
17074 Author: Thomas Knobloch <knobloch@siemens.com>
17075 Date: Sat May 5 07:04:42 2007 +0200
17077 NAND: Wrong calculation of page number in nand_block_bad()
17079 In case that there is no memory based bad block table available the
17080 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
17081 nand_block_bad() directly. When parameter 'getchip' is set to zero,
17082 nand_block_bad() will not right shift the offset to calculate the
17083 correct page number.
17085 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
17086 Signed-off-by: Stefan Roese <sr@denx.de>
17088 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
17089 Author: Wolfgang Denk <wd@denx.de>
17090 Date: Fri May 4 10:02:33 2007 +0200
17092 Fix initrd length corruption in bootm command.
17094 When using FDT Images, the length of an inital ramdisk was
17095 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
17097 Patches by Timur Tabi & Johns Daniel.
17099 Signed-off-by: Wolfgang Denk <wd@denx.de>
17101 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
17102 Author: Kim Phillips <kim.phillips@freescale.com>
17103 Date: Thu May 3 19:43:52 2007 -0500
17105 mpc83xx: fix trivial error in MAKEALL
17107 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17109 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
17110 Author: Wolfgang Denk <wd@denx.de>
17111 Date: Thu May 3 16:34:41 2007 +0200
17113 Update board configuration for STX GP3SSA board:
17115 Enable hush shell, environment in flash rather in EEPROM,
17116 more user-friendly default environment, etc.
17117 The simple EEPROM environment can be selected easily in the board
17120 Signed-off-by: Wolfgang Denk <wd@denx.de>
17122 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
17123 Author: Wolfgang Denk <wd@denx.de>
17124 Date: Tue Apr 24 14:37:49 2007 +0200
17126 Cleanup STX GP3SSA code; fix build and compile problems.
17128 commit 35171dc04e028ecacc23ad916a66295472555dbf
17129 Author: Dan Malek <dan@embeddedalley.com>
17130 Date: Fri Jan 5 09:15:34 2007 +0100
17132 Add support for STX GP3SSA (stxssa) Board
17134 Signed-off-by Dan Malek, <dan@embeddedalley.com>
17136 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
17137 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17138 Date: Wed May 2 13:31:53 2007 +0200
17140 macb: Don't restart autonegotiation if we already have link
17142 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
17143 link is already up.
17145 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17147 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
17148 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17149 Date: Wed May 2 13:22:38 2007 +0200
17151 macb: Introduce a few barriers when dealing with DMA descriptors
17153 There were a few theoretical possibilities that the compiler might
17154 optimize away DMA descriptor reads and/or writes and thus cause
17155 synchronization problems with the hardware. Insert barriers where
17156 we depend on reads/writes actually hitting memory.
17158 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17160 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
17161 Author: Andy Fleming <afleming@freescale.com>
17162 Date: Sat Feb 24 01:08:13 2007 -0600
17164 Cleaned up some 85xx PCI bugs
17166 * Cleaned up the CDS PCI Config Tables and added NULL entries to
17168 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
17169 * Fixed 85xx PCI code to assign powar region sizes based on the
17170 config values (rather than hard-coding them)
17171 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
17173 Signed-off-by: Andy Fleming <afleming@freescale.com>
17175 commit 6743105988fc44d5b0d30388c790607835aae7a6
17176 Author: Andy Fleming <afleming@freescale.com>
17177 Date: Mon Apr 23 02:54:25 2007 -0500
17179 Add support for the 8568 MDS board
17181 This included some changes to common files:
17182 * Add 8568 processor SVR to various places
17183 * Add support for setting the qe bus-frequency value in the dts
17184 * Add the 8568MDS target to the Makefile
17186 Signed-off-by: Andy Fleming <afleming@freescale.com>
17188 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
17189 Author: David Updegraff <dave@cray.com>
17190 Date: Fri Apr 20 14:34:48 2007 -0500
17192 Add support for treating unknown PHYs as generic PHYs.
17194 When bringing up u-boot on new boards, PHY support sometimes gets
17195 neglected. Most PHYs don't really need any special support,
17196 though. By adding a generic entry that always matches if nothing
17197 else does, we can provide support for "unsupported" PHYs for the
17200 The generic PHY driver supports most PHYs, including gigabit.
17202 Signed-off-by: David Updegraff <dave@cray.com>
17203 Signed-off-by: Andy Fleming <afleming@freescale.com>
17205 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
17206 Author: James Yang <James.Yang@freescale.com>
17207 Date: Wed Feb 7 15:28:04 2007 -0600
17209 Conditionalize 8641 Rev1.0 MCM workarounds
17211 Signed-off-by: James Yang <James.Yang@freescale.com>
17212 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17214 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
17215 Author: Timur Tabi <timur@freescale.com>
17216 Date: Mon Apr 30 13:59:50 2007 -0500
17218 Fix memory initialization on MPC8349E-mITX
17220 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
17221 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
17222 on some ITX boards, notably those with a revision 3.1 CPU.
17224 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
17225 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
17227 Signed-off-by: Timur Tabi <timur@freescale.com>
17228 Acked-by: Michael Benedict <MBenedict@twacs.com>
17229 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17231 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
17232 Author: Kim Phillips <kim.phillips@freescale.com>
17233 Date: Mon Apr 30 15:26:21 2007 -0500
17235 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
17237 and fix CPU: to align with Board: display text.
17239 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17241 commit c1ab82669d9525998c34e802a12cad662723f22a
17242 Author: James Yang <James.Yang@freescale.com>
17243 Date: Fri Mar 16 13:02:53 2007 -0500
17245 Rewrote picos_to_clk() to avoid rounding errors.
17246 Clarified that conversion is to DRAM clocks rather than platform clocks.
17247 Made function static to spd_sdram.c.
17249 Signed-off-by: James Yang <James.Yang@freescale.com>
17250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17252 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
17253 Author: Stefan Roese <sr@denx.de>
17254 Date: Sun Apr 29 14:13:01 2007 +0200
17256 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
17258 Signed-off-by: Stefan Roese <sr@denx.de>
17260 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
17261 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
17262 Date: Sun Apr 29 14:01:54 2007 +0200
17264 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
17266 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
17267 message. Use PVR to distinguish between the two variants, and print proper CPU
17270 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
17271 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17272 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17274 commit 5c5d3242935cf3543af01142627494434834cf98
17275 Author: Kim Phillips <kim.phillips@freescale.com>
17276 Date: Wed Apr 25 12:34:38 2007 -0500
17278 mpc83xx: minor fixups for 8313rdb introduction
17280 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
17281 Author: Ladislav Michl <ladis@linux-mips.org>
17282 Date: Wed Apr 25 16:01:26 2007 +0200
17284 [PATCH] simplify silent console
17286 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
17287 Acked-by: Stefan Roese <sr@denx.de>
17289 commit 144876a380f5756f57412caf74c1d6dc201dd796
17290 Author: Michal Simek <monstr@monstr.eu>
17291 Date: Tue Apr 24 23:01:02 2007 +0200
17293 [PATCH] MTD partition support, JFFS2 support
17295 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
17296 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17297 Date: Tue Apr 24 14:03:45 2007 +0200
17299 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
17301 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17303 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
17304 Author: Andy Fleming <afleming@freescale.com>
17305 Date: Mon Apr 23 02:37:47 2007 -0500
17307 Reworked 85xx speed detection code
17309 Changed the code to read the registers and calculate the clock
17310 rates, rather than using a "switch" statement.
17312 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
17314 Signed-off-by: Andy Fleming <afleming@freescale.com>
17316 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
17317 Author: Andy Fleming <afleming@freescale.com>
17318 Date: Mon Apr 23 02:24:28 2007 -0500
17320 Enable 8544 support
17322 * Add support to the Makefile
17323 * Add 8544 configuration support to the tsec driver
17324 * Add 8544 SVR numbers to processor.h
17326 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17327 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17329 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
17330 Author: Andy Fleming <afleming@freescale.com>
17331 Date: Fri Feb 23 17:12:25 2007 -0600
17333 Support 1G size on 8548
17335 e500v2 and newer cores support 1G page sizes.
17337 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17338 Signed-off-by: Andy Fleming <afleming@freescale.com>
17340 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
17341 Author: Andy Fleming <afleming@freescale.com>
17342 Date: Fri Feb 23 17:11:16 2007 -0600
17344 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
17346 The other pagesz constants use one letter to specify order of
17347 magnitude. Also change the one reference to it in mpc8548cds/init.S
17349 Signed-off-by: Andy Fleming <afleming@freescale.com>
17351 commit 1f9a318cea14272edd10d63739e2d326c90f430e
17352 Author: Andy Fleming <afleming@freescale.com>
17353 Date: Fri Feb 23 16:28:46 2007 -0600
17355 Only set ddrioovcr for 8548 rev1.
17357 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17358 Signed-off-by: Andy Fleming <afleming@freescale.com>
17360 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
17361 Author: Andy Fleming <afleming@freescale.com>
17362 Date: Sat Feb 24 01:16:45 2007 -0600
17364 Tweak DDR ECC error counter
17366 Enable single-bit error counter when memory was cleared by ddr controller.
17368 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17369 Signed-off-by: Andy Fleming <afleming@freescale.com>
17371 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
17372 Author: Timur Tabi <timur@freescale.com>
17373 Date: Mon Feb 12 13:34:55 2007 -0600
17375 85xx: write MAC address to mac-address and local-mac-address
17377 Some device trees have a mac-address property, some have local-mac-address,
17378 and some have both. To support all of these device trees, ftp_cpu_setup()
17379 should write the MAC address to mac-address and local-mac-address, if they
17382 Signed-off-by: Timur Tabi <timur@freescale.com>
17384 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
17385 Author: Andy Fleming <afleming@freescale.com>
17386 Date: Mon Apr 23 01:44:44 2007 -0500
17388 Some 85xx cpu cleanups
17390 * Cleaned up the TSR[WIS] clearing
17391 * Cleaned up DMA initialization
17393 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17394 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17395 Acked-by: Andy Fleming <afleming@freescale.com>
17397 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
17398 Author: Andy Fleming <afleming@freescale.com>
17399 Date: Mon Apr 23 01:32:22 2007 -0500
17401 Add cpu support for the 8544
17403 Recognize new SVR values, and add a few register definitions
17405 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17406 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17407 Acked-by: Andy Fleming <afleming@freescale.com>
17409 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
17410 Author: Jon Loeliger <jdl@freescale.com>
17411 Date: Wed Apr 11 16:51:02 2007 -0500
17413 Add MPC8544DS basic port board files.
17415 Add board port under new board/freescale directory
17416 structure and reuse existing PIXIS FPGA support there.
17418 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17419 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17421 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
17422 Author: Jon Loeliger <jdl@freescale.com>
17423 Date: Wed Apr 11 16:50:57 2007 -0500
17425 Add MPC8544DS main configuration file.
17427 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17428 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17430 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
17431 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17432 Date: Wed Dec 27 22:07:15 2006 +0300
17434 Fix PCI I/O space mapping on Freescale MPC85x0ADS
17436 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
17437 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
17438 describing the local address window used for the PCI I/O space accesses -- fix
17439 this and carry over the necessary changes into the MPC8560ADS code since the
17440 PCI I/O space mapping was also broken for this board (by the earlier commit
17441 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
17442 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
17444 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17446 board/mpc8540ads/init.S | 4 ++--
17447 board/mpc8560ads/init.S | 4 ++--
17448 include/configs/MPC8540ADS.h | 5 ++---
17449 include/configs/MPC8541CDS.h | 2 +-
17450 include/configs/MPC8548CDS.h | 2 +-
17451 include/configs/MPC8560ADS.h | 8 ++++----
17452 6 files changed, 12 insertions(+), 13 deletions(-)
17454 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
17455 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17456 Date: Tue Dec 5 16:42:30 2006 +0800
17458 u-boot: Fix e500 v2 core reset bug
17460 The following patch fixes the e500 v2 core reset bug.
17461 For e500 v2 core, a new reset control register is added to reset the
17464 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17466 commit 63247a5acd58032e6cf33f525bc3923b467bac88
17467 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17468 Date: Wed Dec 20 11:01:00 2006 +0800
17470 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
17472 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
17473 entry number to control the loop. This can reduce the potential risk
17474 for the 85xx processor increasing its TLB adn LAW entry number.
17476 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
17477 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17479 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
17480 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17481 Date: Mon Dec 18 17:01:04 2006 +0800
17483 u-boot: Fix the 85xxcds tsec bug
17485 Fix the 85xxcds tsec bug.
17486 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
17488 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17490 commit 7337b237ffc4aaf1b9467024fe472a880d852598
17491 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17492 Date: Fri Dec 15 14:43:31 2006 +0800
17494 u-boot: Fix CPU2 errata on MPC8548CDS board
17496 This patch apply workaround of CPU2 errata on MPC8548CDS board.
17498 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
17500 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
17501 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
17502 Date: Mon Dec 18 16:25:15 2006 +0800
17504 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
17506 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
17508 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
17510 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
17511 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
17512 Date: Thu Dec 14 14:14:55 2006 +0800
17514 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
17516 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
17518 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
17520 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
17521 Author: Scott Wood <scottwood@freescale.com>
17522 Date: Mon Apr 16 14:54:15 2007 -0500
17524 mpc83xx: Add MPC8313ERDB support.
17526 Signed-off-by: Scott Wood <scottwood@freescale.com>
17528 commit 49ea3b6eafe606285ae4d5c378026153dde53200
17529 Author: Scott Wood <scottwood@freescale.com>
17530 Date: Mon Apr 16 14:34:21 2007 -0500
17532 mpc83xx: Add generic PCI setup code.
17534 Board code can now request the generic setup code rather than having to
17535 copy-and-paste it for themselves. Boards should be converted to use this
17536 once they're tested with it.
17538 Signed-off-by: Scott Wood <scottwood@freescale.com>
17540 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
17541 Author: Scott Wood <scottwood@freescale.com>
17542 Date: Mon Apr 16 14:34:19 2007 -0500
17544 mpc83xx: Add 831x support to speed.c.
17546 Signed-off-by: Scott Wood <scottwood@freescale.com>
17548 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
17549 Author: Scott Wood <scottwood@freescale.com>
17550 Date: Mon Apr 16 14:34:18 2007 -0500
17552 mpc83xx: Add 831x support to global_data.h
17554 Signed-off-by: Scott Wood <scottwood@freescale.com>
17556 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
17557 Author: Scott Wood <scottwood@freescale.com>
17558 Date: Mon Apr 16 14:34:16 2007 -0500
17560 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
17562 Rather than misleadingly define PVR_83xx as the specific type of 83xx
17563 being built for, the PVR of each core revision is defined. checkcpu() now
17564 prints the core that it detects, rather than aborting if it doesn't find
17565 what it thinks it wants.
17567 Signed-off-by: Scott Wood <scottwood@freescale.com>
17569 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
17570 Author: Scott Wood <scottwood@freescale.com>
17571 Date: Mon Apr 16 14:34:15 2007 -0500
17573 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
17575 Signed-off-by: Scott Wood <scottwood@freescale.com>
17577 commit d87c57b201b4572d16f1b642998faa00c9912b16
17578 Author: Scott Wood <scottwood@freescale.com>
17579 Date: Mon Apr 16 14:31:55 2007 -0500
17581 mpc83xx: Add register definitions for MPC831x.
17583 Signed-off-by: Scott Wood <scottwood@freescale.com>
17585 commit 7fc4c71a143be8666d70803fb25ae60379c95622
17586 Author: Stefan Roese <sr@denx.de>
17587 Date: Mon Apr 23 15:39:59 2007 +0200
17591 Signed-off-by: Stefan Roese <sr@denx.de>
17593 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
17594 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17595 Date: Mon Apr 23 15:30:39 2007 +0200
17597 [PATCH] Avoid assigning PCI resources from zero address
17599 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
17600 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
17601 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
17602 sentence about "0" being considered an invalid address) -- so, use a reasonable
17603 starting value of 0x1000 (that's what the most Linux archs are using).
17605 Alternatively, one might have fixed the calls to pci_set_region() individually
17606 (some code even seems to have taken care of this issue) but that would have
17607 been a lot more work. :-)
17609 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
17610 Acked-by: Stefan Roese <sr@denx.de>
17612 commit afb903a2eb9436baa9270ccc0c27082d86497d89
17613 Author: Jeffrey Mann <mannj@embeddedplanet.com>
17614 Date: Mon Apr 23 14:00:11 2007 +0200
17616 [patch] setenv(...) can delete environmentalvariables
17618 update setenv() function so that entering a NULL value for the
17619 variable's value will delete the environmental variable
17621 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
17622 Acked-by: Stefan Roese <sr@denx.de>
17624 commit 36f104e5caa747d568eff26b369565af57c2ffa6
17625 Author: Mike Frysinger <vapier@gentoo.org>
17626 Date: Mon Apr 23 13:54:24 2007 +0200
17628 [patch] use unsigned char in smc91111 driver for mac
17630 the v_mac variable in the smc91111 driver is declared as a signed char ...
17631 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
17632 because when it gets printed out, you get a display like:
17633 0xFFFFFFE0 and that's no good
17635 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
17637 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
17638 Author: Rodolfo Giometti <giometti@enneenne.com>
17639 Date: Mon Apr 23 13:10:52 2007 +0200
17641 USB: (Another) delay for crappy USB keys.
17643 Some USB keys are slow in giving back an answer when the Root HUB
17644 enables power lines.
17646 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
17648 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
17649 Author: Stefan Roese <sr@denx.de>
17650 Date: Mon Apr 23 12:00:22 2007 +0200
17652 Remove BOARDLIBS usage completely
17654 Signed-off-by: Stefan Roese <sr@denx.de>
17656 commit 32556443840f127170e4baa8bdd5b567039f6c36
17657 Author: Michal Simek <monstr@monstr.eu>
17658 Date: Sat Apr 21 21:07:22 2007 +0200
17660 [PATCH] SystemACE support for Microblaze
17662 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
17663 Author: Michal Simek <monstr@monstr.eu>
17664 Date: Sat Apr 21 21:02:40 2007 +0200
17666 16bit read/write little endian
17668 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
17669 Author: Michal Simek <monstr@monstr.eu>
17670 Date: Sat Apr 21 20:53:31 2007 +0200
17672 Change ML401 parameters - Xilinx BSP
17674 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
17675 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17676 Date: Wed Feb 28 05:37:29 2007 -0600
17678 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
17680 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17682 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
17683 Author: Zhang Wei <wei.zhang@freescale.com>
17684 Date: Fri Jan 19 10:42:37 2007 +0800
17686 Enable LAWs for MPC8641 PCI-Ex2.
17688 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
17689 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17691 commit bd7851ce1e1f140665b520026abf1042968b1102
17692 Author: Jon Loeliger <jdl@freescale.com>
17693 Date: Fri Apr 20 14:12:26 2007 -0500
17695 mpc86xx; Write MAC address to mac-address and local-mac-address
17697 Some device trees have a mac-address property, some have local-mac-address,
17698 and some have both. To support all of these device trees, ftp_cpu_setup()
17699 should write the MAC address to mac-address and local-mac-address, if they
17702 Signed-off-by: Timur Tabi <timur@freescale.com>
17703 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17705 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
17706 Author: Jon Loeliger <jdl@freescale.com>
17707 Date: Fri Apr 20 14:11:38 2007 -0500
17709 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
17711 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17712 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17714 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
17715 Author: Wolfgang Denk <wd@denx.de>
17716 Date: Fri Apr 20 17:43:28 2007 +0200
17718 Cleanup compiler warnings, update CHANGELOG
17720 Signed-off-by: Wolfgang Denk <wd@denx.de>
17722 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
17723 Author: Detlev Zundel <dzu@denx.de>
17724 Date: Fri Apr 20 12:01:47 2007 +0200
17726 Fix breakage of NC650 board with respect to nand support.
17728 Signed-off-by: Detlev Zundel <dzu@denx.de>
17730 commit 39f23cd90947639ac278a18ff277ec786b5ac167
17731 Author: Domen Puncer <domen.puncer@telargo.com>
17732 Date: Fri Apr 20 11:13:16 2007 +0200
17734 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
17736 G2 core reference manual says decrementer and time base
17737 are decreasing/increasing once every 4 bus clock cycles.
17738 Lets fix it, so time in Linux won't run twice as fast
17740 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17741 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17743 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
17744 Author: Gerald Van Baren <vanbaren@cideas.com>
17745 Date: Thu Apr 19 23:14:39 2007 -0400
17747 Fix serious pointer bug with bootm and reserve map.
17749 What was suppose to be a stack variable was declared as a pointer,
17750 overwriting random memory.
17751 Also moved the libfdt.a requirement into the main Makefile. That is
17754 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
17755 Author: Stefan Roese <sr@denx.de>
17756 Date: Thu Apr 19 09:53:52 2007 +0200
17758 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
17760 Previous versions used full wait states for the chip select #1 which
17761 is connected to the Xilinix SystemACE controller on the AMCC Katmai
17762 evaluation board. This leads to really slow access and therefore low
17763 performance. This patch now sets up the chip select a lot faster
17764 resulting in much better read/write performance of the Linux driver.
17766 Signed-off-by: Stefan Roese <sr@denx.de>
17768 commit 37837828d89084879bee2f2b8c7c68d4695940df
17769 Author: Wolfgang Denk <wd@denx.de>
17770 Date: Wed Apr 18 17:49:29 2007 +0200
17772 Clenaup, update CHANGELOG
17774 Signed-off-by: Wolfgang Denk <wd@denx.de>
17776 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
17777 Author: Wolfgang Denk <wd@denx.de>
17778 Date: Wed Apr 18 17:20:58 2007 +0200
17782 Signed-off-by: Wolfgang Denk <wd@denx.de>
17784 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
17785 Author: Wolfgang Denk <wd@denx.de>
17786 Date: Wed Apr 18 17:07:26 2007 +0200
17788 Cleanup, update CHANGELOG
17790 Sigend-off-by: Wolfgang Denk <wd@denx.de>
17792 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
17793 Author: Wolfgang Denk <wd@denx.de>
17794 Date: Wed Apr 18 16:17:46 2007 +0200
17798 commit ad4eb555671d97f96dc56eab55103b1f86874b01
17799 Author: Wolfgang Denk <wd@denx.de>
17800 Date: Wed Apr 18 14:30:39 2007 +0200
17802 MCC200 board: remove warning which is obsolete after PSoC firmware changes
17804 Signed-off-by: Wolfgang Denk <wd@denx.de>
17806 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
17807 Author: Domen Puncer <domen.puncer@telargo.com>
17808 Date: Wed Apr 18 12:11:05 2007 +0200
17810 [PATCH] icecube/lite5200b: document wakeup from low-power support
17812 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17814 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
17815 Author: Stefan Roese <sr@denx.de>
17816 Date: Wed Apr 18 12:07:47 2007 +0200
17818 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
17820 Signed-off-by: Stefan Roese <sr@denx.de>
17822 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
17823 Author: Stefan Roese <sr@denx.de>
17824 Date: Wed Apr 18 12:05:59 2007 +0200
17826 ppc4xx: Add output for bootrom location to 405EZ ports
17828 Now 405EZ ports also show upon bootup from which boot device
17829 they are configured to boot:
17831 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
17833 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
17834 Bootstrap Option E - Boot ROM Location EBC (32 bits)
17835 16 kB I-Cache 16 kB D-Cache
17836 Board: Acadia - AMCC PPC405EZ Evaluation Board
17838 Signed-off-by: Stefan Roese <sr@denx.de>
17840 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
17841 Author: Peter Pearse <peter.pearse@arm.com>
17842 Date: Tue Apr 17 13:30:33 2007 +0100
17844 Move ppearse to ARM board list
17845 Add Konstantin Kletschke for scb9328.
17846 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
17848 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
17849 Author: Domen Puncer <domen.puncer@telargo.com>
17850 Date: Mon Apr 16 14:00:13 2007 +0200
17852 [PATCH] icecube/lite5200b: wakeup from low-power support
17854 U-Boot part of Lite5200b low power mode support.
17855 Puts SDRAM out of self-refresh and transfers control to
17856 address saved at physical 0x0.
17858 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17859 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17861 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
17862 Author: Gerald Van Baren <vanbaren@cideas.com>
17863 Date: Sun Apr 15 13:54:26 2007 -0400
17865 Fix the ft_cpu_setup() property settings.
17867 Use "setter" functions instead of flags, cleaner and more flexible.
17868 It also fixes the problem noted by Timur Tabi that the ethernet MAC
17869 addresses were all being set incorrectly to the same MAC address.
17871 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
17872 Author: Gerald Van Baren <vanbaren@cideas.com>
17873 Date: Sat Apr 14 22:51:24 2007 -0400
17875 Improve the bootm command for CONFIG_OF_LIBFDT
17877 In bootm, create the "/chosen" node only if it doesn't already exist
17878 (better matches the previous behavior).
17879 Update for proper reserved memory map handling for initrd.
17881 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
17882 Author: Gerald Van Baren <vanbaren@cideas.com>
17883 Date: Sat Apr 14 22:46:41 2007 -0400
17885 Add some utilities to manipulate the reserved memory map.
17887 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
17888 Author: Wolfgang Denk <wd@denx.de>
17889 Date: Sat Apr 14 21:16:54 2007 +0200
17893 commit 8e6875183cdca91c134408d119d4abcd48ef6856
17894 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17895 Date: Sun Dec 17 18:56:46 2006 +0100
17897 AVR32: Enable MMC support
17899 Set up the portmux for the MMC interface and enable the MMC driver
17900 along with support for DOS partitions, ext2 and FAT filesystems.
17902 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17904 commit fc26c97bb6df41b4a95662c34054fe912387bf38
17905 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17906 Date: Fri Jan 20 10:03:53 2006 +0100
17910 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
17912 The AT91 ARM-based CPUs use basically the same hardware, so it should
17913 be possible to share this driver, but no effort has been made so far.
17915 Hardware documentation can be found in the AT32AP7000 data sheet,
17916 which can be downloaded from
17918 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
17920 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17922 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
17923 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17924 Date: Sun Dec 17 18:55:37 2006 +0100
17926 AVR32: Add clk and gpio infrastructure for mmci
17928 Implement functions for configuring the mmci pins, as well as
17929 functions for getting the clock rate of the mmci controller.
17931 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17933 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
17934 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17935 Date: Sun Dec 17 18:53:56 2006 +0100
17937 Enable partition support with MMC
17939 Include implementations of init_part() and get_partition_info() when
17942 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17944 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
17945 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17946 Date: Sun Dec 17 17:14:30 2006 +0100
17948 AVR32: Enable networking
17950 Implement MACB initialization for AVR32 and ATSTK1000, and turn
17951 everything on, including the MACB driver.
17953 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17955 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
17956 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17957 Date: Fri Jan 20 10:03:34 2006 +0100
17959 Atmel MACB ethernet driver
17961 Driver for the Atmel MACB on-chip ethernet controller.
17963 This driver has been tested on the ATSTK1000 board with a AT32AP7000
17964 CPU. It should probably work on AT91SAM926x as well with some minor
17967 Hardware documentation can be found in the AT32AP7000 data sheet,
17968 which can be downloaded from
17970 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
17972 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17974 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
17975 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17976 Date: Sun Dec 17 16:56:14 2006 +0100
17978 AVR32: Add clk and gpio infrastructure for macb0 and macb1
17980 Implement functions for configuring the macb0 and macb1 pins, as
17981 well as functions for getting the clock rate of the various
17982 busses the macb ethernet controllers are connected to.
17984 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17986 commit d5acb95b16a0a74c643524342c3437e765426d05
17987 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17988 Date: Sun Dec 17 15:39:15 2006 +0100
17990 AVR32: Implement simple DMA memory allocator
17992 Implement dma_alloc_coherent() which returns cache-aligned
17993 uncacheable memory.
17995 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17997 commit 91975b0fea773c9e681fea8cf3349669f27685ee
17998 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17999 Date: Sun Dec 17 15:46:02 2006 +0100
18001 Import <linux/mii.h> from the Linux kernel
18003 Instead of creating yet another set of MII register definitions
18004 in the macb driver, here's a complete set of definitions for everyone
18007 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18009 commit 1b804b229556a4d862da93c0ec94e79419364b2c
18010 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18011 Date: Wed Mar 21 19:47:36 2007 +0100
18013 AVR32: Include more commands for ATSTK1000
18015 Include the imi, imls and jffs commands sets by default on ATSTK1000.
18016 Also define CONFIG_BOOTARGS to something more useful, define
18017 CONFIG_BOOTCOMMAND and enable autoboot by default.
18019 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18021 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
18022 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18023 Date: Wed Mar 21 19:44:48 2007 +0100
18025 AVR32: Provide a definition of struct stat
18027 Copy the definition of struct stat from the Linux kernel.
18029 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18031 commit 12f099c08167a7a51aeee623bc16dafd0841271c
18032 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18033 Date: Sun Dec 17 14:46:06 2006 +0100
18035 AVR32: Use initdram() instead of board_init_memories()
18037 Conform to the "standard" interface and use initdram() instead of
18038 board_init_memories() on AVR32. This enables us to get rid of the
18039 sdram_size member of the global_data struct as well.
18041 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18043 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
18044 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18045 Date: Mon Nov 20 15:53:10 2006 +0100
18047 AVR32: Relocate u-boot to SDRAM
18049 Relocate the u-boot image into SDRAM like everyone else does. This
18050 means that we can handle much larger .data and .bss than we used to.
18052 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18054 commit df548d3c3e2bbc40258713167859ffc2ce99a900
18055 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18056 Date: Sun Nov 19 18:06:53 2006 +0100
18058 AVR32: Resource management rewrite
18060 Rewrite the resource management code (i.e. I/O memory, clock gating,
18061 gpio) so it doesn't depend on any global state. This is necessary
18062 because this code is heavily used before relocation to RAM, so we
18063 can't write to any global variables.
18065 As an added bonus, this makes u-boot's memory footprint a bit smaller,
18066 although some functionality has been left out; all clocks are enabled
18067 all the time, and there's no checking for gpio line conflicts.
18069 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18071 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
18072 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18073 Date: Sat Nov 18 18:01:13 2006 +0100
18075 AVR32: Clean up memory-map.h for at32ap7000
18077 Convert spaces to tabs (must have missed this one last time around),
18078 sort the entries by address and group them together by bus
18081 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18083 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
18084 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18085 Date: Sat Nov 18 17:32:31 2006 +0100
18087 AVR32: Build position-independent u-boot
18089 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
18090 position independent. This will make relocation a lot easier.
18092 -mno-init-got means that gcc shouldn't emit code to load the GOT
18093 address into r6 in every function prologue. We do it once and for
18094 all in the early startup assembly code, so enabling this option
18095 makes u-boot a bit faster and smaller.
18097 The assembly parts have always been position-independent, so no code
18098 changes should be necessary.
18100 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18102 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
18103 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18104 Date: Sat Nov 18 17:24:31 2006 +0100
18106 AVR32: Use avr32-linux- cross-compilation prefix by default
18108 It doesn't really matter which toolchain you use to compile u-boot,
18109 but the avr32-linux one is probably what most people have installed.
18111 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18113 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
18114 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18115 Date: Sat Nov 18 17:15:30 2006 +0100
18117 AVR32: Split start_u_boot into board_init_f and board_init_r
18119 Split the avr32 initialization code into a function to run before
18120 relocation, board_init_f and a function to run after relocation,
18121 board_init_r. For now, board_init_f simply calls board_init_r
18124 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18126 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
18127 Author: Heiko Schocher <hs@pollux.denx.de>
18128 Date: Sat Apr 14 05:26:48 2007 +0200
18130 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
18131 clear the Display after reset.
18133 Signed-off-by: Heiko Schocher <hs@denx.de>
18135 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
18136 Author: Denis Peter <d.peter@mpl.ch>
18137 Date: Fri Apr 13 09:13:33 2007 +0200
18139 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
18141 Fix bug introduced by "Fix get_partition_info() parameter error in all
18142 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
18143 to use diskboot or scsiboot form another device than 0.
18145 Signed-off-by: Denis Peter <d.peter@mpl.ch>
18147 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
18148 Author: Greg Lopp <lopp@pobox.com>
18149 Date: Fri Apr 13 08:02:24 2007 +0200
18151 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
18153 Signed-of-by: Greg Lopp <lopp@pobox.com>
18154 Acked-by: Grant Likely <grant.likely@secretlab.ca>
18156 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
18157 Author: Xie Xiaobo <r63061@freescale.com>
18158 Date: Fri Mar 9 19:08:25 2007 +0800
18160 Fix two bugs for MPC83xx DDR2 controller SPD Init
18162 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
18163 the first bug is that the picos_to_clk routine introduces a huge
18164 rounding error in 83xx.
18165 the second bug is that the mode register write recovery field is
18166 tWR-1, not tWR >> 1.
18168 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
18169 Author: Jeffrey Mann <mannj@embeddedplanet.com>
18170 Date: Thu Apr 12 14:15:59 2007 +0200
18172 ppc4xx: Fix i2c divisor calcularion for PPC4xx
18174 This patch fixes changes the i2c_init(...) function to use the function
18175 get_OPB_freq() rather than calculating the OPB speed by
18176 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
18177 specific per processor. The prior method was not and so was calculating
18178 the wrong speed for some PPC4xx processors.
18180 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
18181 Signed-off-by: Stefan Roese <sr@denx.de>
18183 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
18184 Author: Wolfgang Denk <wd@denx.de>
18185 Date: Wed Apr 11 17:25:01 2007 +0200
18189 Signed-off-by: Wolfgang Denk <wd@denx.de>
18191 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
18192 Author: Wolfgang Denk <wd@denx.de>
18193 Date: Wed Apr 11 17:22:55 2007 +0200
18195 Update for SC3 board
18197 * Make IDE timeout configurable through ide_reset_timeout variable.
18198 * Use Newline as "password" string
18199 * Use just a single partition in NAND flash
18201 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
18202 Author: Haiying Wang <haiying.wang@freescale.com>
18203 Date: Mon Jan 22 12:37:30 2007 -0600
18205 Add PIXIS FPGA support for MPC8641HPCN board.
18207 Move the 8641HPCN's PIXIS code to the new directory
18208 board/freescale/common/ as it will be shared by
18209 future boards not in the same processor family.
18211 Write a "pixis_reset" command that utilizes the FPGA
18212 reset sequencer to support alternate soft-reset options
18213 such as using the "alternate" flash bank, enabling
18214 the watch dog, or choosing different CPU frequencies.
18216 Add documentation for the pixis_reset to README.mpc8641hpcn.
18218 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
18219 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18221 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
18222 Author: Gerald Van Baren <vanbaren@cideas.com>
18223 Date: Fri Apr 6 14:19:43 2007 -0400
18225 Moved fdt command support code to fdt_support.c
18227 ...in preparation for improving the bootm command's handling of fdt blobs.
18228 Also cleaned up some coding sloppiness.
18230 commit 6679f9299534e488a171a9bb8f9bb891de247aab
18231 Author: Gerald Van Baren <vanbaren@cideas.com>
18232 Date: Fri Apr 6 14:17:14 2007 -0400
18234 libfdt: Make fdt_check_header() public
18236 Changed _fdt_check_header() to fdt_check_header() and made it part of
18237 the interface - it is a useful routine.
18239 Also did some asthetics cleanup to the include files (headers).
18241 commit c0707ce65677650b5ceab0500ee50ae5168afef2
18242 Author: Aubrey Li <aubrey.adi@gmail.com>
18243 Date: Thu Apr 5 18:34:06 2007 +0800
18245 [Blackfin][PATCH] Kill off a bunch of common local prototypes
18247 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
18248 Author: Aubrey Li <aubrey.adi@gmail.com>
18249 Date: Thu Apr 5 18:33:04 2007 +0800
18251 [Blackfin][PATCH] Fix dynamic CPLB generation issue
18253 commit 0445e3a264251d75b1be45ef713c70726a2952f0
18254 Author: Aubrey Li <aubrey.adi@gmail.com>
18255 Date: Thu Apr 5 18:31:47 2007 +0800
18257 [Blackfin][PATCH] minior cleanup
18259 commit 155fd766573981090e638b493d5857562151862e
18260 Author: Aubrey Li <aubrey.adi@gmail.com>
18261 Date: Thu Apr 5 18:31:18 2007 +0800
18263 [Blackfin][PATCH] Fix copyright and update license
18265 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
18266 Author: Aubrey Li <aubrey.adi@gmail.com>
18267 Date: Thu Apr 5 18:30:25 2007 +0800
18269 [Blackfin][PATCH] Add BF537 EMAC driver initialization
18271 commit 889256e8604e0c68db1d866d720894dffede9df6
18272 Author: Aubrey Li <aubrey.adi@gmail.com>
18273 Date: Thu Apr 5 18:29:55 2007 +0800
18275 [Blackfin][PATCH] call real the system synchronize instruction
18277 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
18278 Author: Aubrey Li <aubrey.adi@gmail.com>
18279 Date: Thu Apr 5 18:29:17 2007 +0800
18281 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
18283 commit dfeeab2cd680df047e68e723b246adf6f33bb556
18284 Author: Aubrey Li <aubrey.adi@gmail.com>
18285 Date: Thu Apr 5 18:28:34 2007 +0800
18287 [Blackfin][PATCH]: fix flash unaligned copy issue
18289 commit 443feb740584e406efa203af909fe2926608e8d5
18290 Author: Igor Marnat <marny@rambler.ru>
18291 Date: Wed Mar 21 09:55:01 2007 +0300
18293 Update usage of 'nc' in README.NetConsole
18295 Added information about usage of NetConsole on systems where the -l and -p
18296 switches are mutually exclusive.
18298 Signed-off-by: Igor Marnat <marny@rambler.ru>
18299 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18301 commit 31c98a88228021b314c89ebb8104fb6473da4471
18302 Author: Wolfgang Denk <wd@denx.de>
18303 Date: Wed Apr 4 02:09:30 2007 +0200
18305 Minor coding style cleanup.
18307 commit 94abd7c0583ebe01e799b25f451201deeaab550d
18308 Author: Wolfgang Denk <wd@denx.de>
18309 Date: Wed Apr 4 01:49:15 2007 +0200
18313 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
18314 Author: Rodolfo Giometti <giometti@enneenne.com>
18315 Date: Tue Apr 3 14:27:18 2007 +0200
18317 Support for the Philips ISP116x HCD (Host Controller Driver)
18319 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
18321 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
18322 Author: Markus Klotzbuecher <mk@denx.de>
18323 Date: Tue Apr 3 14:27:08 2007 +0200
18325 USB: cleanup monahans usb support. Remove dead code.
18327 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18329 commit a65c5768e5537530bd1780af3d3fddc3113a163c
18330 Author: Stefan Roese <sr@denx.de>
18331 Date: Mon Apr 2 10:09:30 2007 +0200
18333 ppc4xx: Change SysACE address on Katmai
18335 With this new base address of the Xilinx SystemACE controller
18336 the Linux driver will be easier to adapt, since it can now be
18337 mapped via the "normal" ioremap() call.
18339 Signed-off-by: Stefan Roese <sr@denx.de>
18341 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
18342 Author: Gerald Van Baren <vanbaren@cideas.com>
18343 Date: Sat Mar 31 14:30:53 2007 -0400
18345 Fix some minor whitespace violations.
18347 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
18348 Author: Gerald Van Baren <vanbaren@cideas.com>
18349 Date: Sat Mar 31 12:23:51 2007 -0400
18351 Add a flattened device tree (fdt) command (2 of 2)
18353 Modifications to the existing code to support the new fdt command.
18355 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
18356 Author: Gerald Van Baren <vanbaren@cideas.com>
18357 Date: Sat Mar 31 12:22:10 2007 -0400
18359 Add a flattened device tree (fdt) command (1 of 2)
18361 The fdt command uses David Gibson's libfdt library to manipulate as well
18362 as print the flattened device tree. This patch is the new command,
18363 the second part is the modifications to the existing code.
18365 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
18366 Author: Gerald Van Baren <vanbaren@cideas.com>
18367 Date: Sat Mar 31 12:13:43 2007 -0400
18369 libfdt: Enhanced and published fdt_next_tag()
18371 Enhanced the formerly private function _fdt_next_tag() to allow stepping
18372 through the tree, used to produce a human-readable dump, and made
18373 it part of the published interface.
18374 Also added some comments.
18376 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
18377 Author: Gerald Van Baren <vanbaren@cideas.com>
18378 Date: Sat Mar 31 12:05:39 2007 -0400
18380 libfdt: Customizations for use by u-boot.
18382 Changes to David Gibson's original source to fit into u-boot's
18383 environment. No functionality changes.
18385 commit 35748177c64a4a83a00057e93bb33e40278a2a96
18386 Author: Gerald Van Baren <vanbaren@cideas.com>
18387 Date: Sat Mar 31 12:00:56 2007 -0400
18389 libfdt: Import libfdt source (2 of 2)
18391 This adds the applicable libfdt source files (unmodified) and a README
18392 to explain where the source came from.
18394 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
18395 Author: Gerald Van Baren <vanbaren@cideas.com>
18396 Date: Sat Mar 31 11:59:59 2007 -0400
18398 libfdt: Import libfdt source (1 of 2)
18400 This adds the applicable libfdt source files (unmodified) and a README
18401 to explain where the source came from.
18403 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
18404 Author: Stefan Roese <sr@denx.de>
18405 Date: Sat Mar 31 13:16:23 2007 +0200
18407 ppc4xx: Update Katmai bootstrap command
18409 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
18412 Signed-off-by: Stefan Roese <sr@denx.de>
18414 commit cabee756a6532986729477c3cc1ea16ef8517ad2
18415 Author: Stefan Roese <sr@denx.de>
18416 Date: Sat Mar 31 13:15:06 2007 +0200
18418 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
18420 Additional RAM information is now printed upon powerup, like
18421 DDR2 frequency and CAS latency.
18423 Signed-off-by: Stefan Roese <sr@denx.de>
18425 commit 60723803431ac75cad085690789e433d5ab9174e
18426 Author: Stefan Roese <sr@denx.de>
18427 Date: Sat Mar 31 08:48:36 2007 +0200
18429 ppc4xx: Change Yucca config file to support ECC
18431 With the updated 44x DDR2 driver the Yucca board now supports
18432 ECC generation and checking.
18434 Signed-off-by: Stefan Roese <sr@denx.de>
18436 commit 490e5730c674b20d708b783a2c5ffd7208f83873
18437 Author: Stefan Roese <sr@denx.de>
18438 Date: Sat Mar 31 08:47:34 2007 +0200
18440 ppc4xx: Fix "bootstrap" command for Katmai board
18442 The board specific "bootstrap" command is now fixed and can
18443 be used for the AMCC Katmai board to configure different
18444 CPU/PLB/OPB frequencies.
18446 Signed-off-by: Stefan Roese <sr@denx.de>
18448 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
18449 Author: Stefan Roese <sr@denx.de>
18450 Date: Sat Mar 31 08:46:08 2007 +0200
18452 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
18454 Fix a bug in the auto calibration routine. This driver now runs
18455 more reliable with the tested modules. It's also tested with
18456 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
18458 Signed-off-by: Stefan Roese <sr@denx.de>
18460 commit 342cd097be1e7affe82f42ab3da220959a699e64
18461 Author: Michal Simek <monstr@monstr.eu>
18462 Date: Fri Mar 30 22:52:09 2007 +0200
18464 [PATCH] Clean include dependence
18466 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
18467 Author: Michal Simek <monstr@monstr.eu>
18468 Date: Fri Mar 30 22:42:45 2007 +0200
18470 [CLEAN] Remove inefficient Suzaku code
18472 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
18473 Author: Stefan Roese <sr@denx.de>
18474 Date: Wed Mar 28 15:03:16 2007 +0200
18476 Merge some AMCC make targets to keep the top-level Makefile smaller
18478 Signed-off-by: Stefan Roese <sr@denx.de>
18480 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
18481 Author: Stefan Roese <sr@denx.de>
18482 Date: Wed Mar 28 14:52:12 2007 +0200
18484 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
18486 The "old" i2c commands (iprobe, imd...) are now compiled in again,
18487 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
18490 Signed-off-by: Stefan Roese <sr@denx.de>
18492 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
18493 Author: Michal Simek <monstr@monstr.eu>
18494 Date: Tue Mar 27 00:32:16 2007 +0200
18496 PATCH: Resolve GPL license problem
18498 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
18499 Author: Rodolfo Giometti <giometti@enneenne.com>
18500 Date: Mon Mar 26 12:03:36 2007 +0200
18502 PXA: pxa27x USB OHCI support
18504 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
18506 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
18507 Author: Markus Klotzbuecher <mk@denx.de>
18508 Date: Mon Mar 26 11:21:05 2007 +0200
18510 USB: remove the S3C24X0_merge #define, which was introduced while
18511 merging OHCI drivers.
18513 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18515 commit 1798049522f594013aea29457d46794298c6ae15
18516 Author: Michal Simek <root@monstr.eu>
18517 Date: Mon Mar 26 01:39:07 2007 +0200
18519 Support for XUPV2P board
18521 BSP autoconfig support
18523 commit 0d974d5297349504a2ddfa09314be573b5df320a
18524 Author: Stefan Roese <sr@denx.de>
18525 Date: Sat Mar 24 15:57:09 2007 +0100
18527 [PATCH] Add 4xx GPIO functions
18529 This patch adds some 4xx GPIO functions. It also moves some of the
18530 common code and defines into a common 4xx GPIO header file.
18532 Signed-off-by: Stefan Roese <sr@denx.de>
18534 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
18535 Author: Stefan Roese <sr@denx.de>
18536 Date: Sat Mar 24 15:55:58 2007 +0100
18538 [PATCH] Small Sequoia cleanup
18540 Signed-off-by: Stefan Roese <sr@denx.de>
18542 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
18543 Author: Stefan Roese <sr@denx.de>
18544 Date: Sat Mar 24 15:45:34 2007 +0100
18546 [PATCH] Clean up 40EZ/Acadia support
18548 This patch cleans up all the open issue of the preliminary
18551 Signed-off-by: Stefan Roese <sr@denx.de>
18553 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
18554 Author: Jon Loeliger <jdl@freescale.com>
18555 Date: Tue Dec 12 11:02:20 2006 -0600
18557 Fix 8641HPCN problem with ld version 2.16
18559 (Dot outside sections problem).
18561 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
18563 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18565 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
18566 Author: Haiying Wang <haiying.wang@freescale.com>
18567 Date: Thu Dec 7 10:35:55 2006 -0600
18569 Set Rev 2.x 86xx PIC in mixed mode.
18571 Prevent false interrupt from hanging Linux as MSR[EE] is set
18572 to enable interrupts by changing the PIC out of the default
18573 pass through mode into mixed mode.
18575 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
18576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18578 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
18579 Author: Jason Jin <jason.jin@freescale.com>
18580 Date: Thu Dec 7 10:32:35 2006 -0600
18582 Add flash cmd function to 8641HPCN ramboot
18584 Also fixes some commmand for 8641 HPCN ramboot case.
18586 Signed-off-by: Jason Jin <jason.jin@freescale.com>
18587 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18589 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
18590 Author: Ed Swarthout <ed.swarthout@freescale.com>
18591 Date: Thu Dec 7 10:34:14 2006 -0600
18593 Add support for 8641 Rev 2 silicon.
18595 Without this patch, I am unable to get to the prompt on rev 2 silicon.
18596 Only set ddrioovcr for rev1.
18598 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
18599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18601 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
18602 Author: Wolfgang Denk <wd@denx.de>
18603 Date: Thu Mar 22 00:13:12 2007 +0100
18605 Code cleanup / re-insert previous Copyright entries.
18607 Signed-off-by: Wolfgang Denk <wd@denx.de>
18609 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
18610 Author: Wolfgang Denk <wd@denx.de>
18611 Date: Wed Mar 21 23:26:15 2007 +0100
18613 Code cleanup. Update CHANGELOG
18615 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
18616 Author: Stefan Roese <sr@denx.de>
18617 Date: Wed Mar 21 14:54:29 2007 +0100
18619 ppc4xx: Fix file mode of include/configs/acadia.h
18621 Signed-off-by: Stefan Roese <sr@denx.de>
18623 commit d5f4614c9350d9333e575100fb250aab774d0258
18624 Author: Markus Klotzbuecher <mk@denx.de>
18625 Date: Wed Mar 21 14:41:46 2007 +0100
18627 SPC1920: fix small clock routing bug
18629 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18631 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
18632 Author: Stefan Roese <sr@denx.de>
18633 Date: Wed Mar 21 13:39:57 2007 +0100
18635 [PATCH] Add AMCC Acadia (405EZ) eval board support
18637 This patch adds support for the new AMCC Acadia eval board.
18639 Please note that this Acadia/405EZ support is still in a beta stage.
18640 Still lot's of cleanup needed but we need a preliminary release now.
18642 Signed-off-by: Stefan Roese <sr@denx.de>
18644 commit e01bd218b00af73499331a1a701625a852cd286f
18645 Author: Stefan Roese <sr@denx.de>
18646 Date: Wed Mar 21 13:38:59 2007 +0100
18648 [PATCH] Add AMCC PPC405EZ support
18650 This patch adds support for the new AMCC 405EZ PPC. It is in
18651 preparation for the AMCC Acadia board support.
18653 Please note that this Acadia/405EZ support is still in a beta stage.
18654 Still lot's of cleanup needed but we need a preliminary release now.
18656 Signed-off-by: Stefan Roese <sr@denx.de>
18658 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
18659 Author: Heiko Schocher <hs@pollux.denx.de>
18660 Date: Wed Mar 21 08:45:17 2007 +0100
18662 [PATCH] TQM8272: dont change the bits given from the HRCW
18663 for the SIUMCR and BCR Register.
18664 Fix the calculation for the EEprom Size
18666 Signed-off-by: Heiko Schocher <hs@denx.de>
18668 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
18669 Author: Aubrey Li <aubrey.adi@gmail.com>
18670 Date: Tue Mar 20 18:16:24 2007 +0800
18672 [Blackfin][PATCH] Add BF561 EZKIT board support
18674 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
18675 Author: Aubrey Li <aubrey.adi@gmail.com>
18676 Date: Mon Mar 19 22:55:58 2007 +0800
18678 [Blackfin][PATCH] minor cleanup
18680 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
18681 Author: Wolfgang Denk <wd@denx.de>
18682 Date: Mon Mar 19 13:10:08 2007 +0100
18684 Remove obsoleted POST files.
18686 Signed-off-by: Wolfgang Denk <wd@denx.de>
18688 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
18689 Author: Aubrey Li <aubrey.adi@gmail.com>
18690 Date: Mon Mar 19 01:26:11 2007 +0800
18692 [PATCH] Add flash chip M29W320ET/B support
18694 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
18695 Author: Aubrey Li <aubrey.adi@gmail.com>
18696 Date: Mon Mar 19 01:24:52 2007 +0800
18698 [Blackfin][PATCH] Add BF537 stamp board support
18700 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
18701 Author: Stefan Roese <sr@denx.de>
18702 Date: Fri Mar 16 21:11:42 2007 +0100
18704 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
18706 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
18707 DDR memory are dynamically programmed matching the total size
18708 of the equipped memory (DIMM modules).
18710 Signed-off-by: Stefan Roese <sr@denx.de>
18712 commit 76d1466f918b881cda2d259254761e73885093c2
18713 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18714 Date: Tue Mar 13 13:38:05 2007 +0100
18716 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
18717 boards in terms of unification.
18719 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18721 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
18722 Author: Wolfgang Denk <wd@denx.de>
18723 Date: Tue Mar 13 16:05:55 2007 +0100
18725 Make SC3 board build with 'make O='; use 'addcons' consistently
18726 (SC3 and Jupiter used to use 'addcon' instead).
18728 Signed-off-by: Wolfgang Denk wd@denx.de
18730 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
18731 Author: Heiko Schocher <hs@pollux.denx.de>
18732 Date: Tue Mar 13 09:40:59 2007 +0100
18734 [PATCH] update board config for jupiter Board:
18736 CONFIG_CMDLINE_EDITING,
18737 CFG_ENV_ADDR_REDUND activated
18739 Signed-off-by: Heiko Schocher <hs@denx.de>
18741 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
18742 Author: Aubrey Li <aubrey.adi@gmail.com>
18743 Date: Mon Mar 12 12:11:55 2007 +0800
18745 [Blackfin][PATCH] minor cleanup
18747 commit bfa5754a58477ac917d21527cd0f079d87cf188e
18748 Author: Aubrey Li <aubrey.adi@gmail.com>
18749 Date: Mon Mar 12 01:42:06 2007 +0800
18751 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
18753 commit 8440bb14581a294375c34b91b42512f9753d1130
18754 Author: Aubrey Li <aubrey.adi@gmail.com>
18755 Date: Mon Mar 12 00:25:14 2007 +0800
18757 [Blackfin][PATCH] code cleanup
18759 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
18760 Author: Michal Simek <monstr@monstr.eu>
18761 Date: Sun Mar 11 13:48:24 2007 +0100
18763 [Microblaze][PATCH] part 2
18765 interrupt controller support
18769 board information support
18771 booting image support
18773 adding support for Xilinx ML401
18775 commit 76316a318de91f6184e7c22a10e02d275ade2441
18776 Author: Michal Simek <monstr@monstr.eu>
18777 Date: Sun Mar 11 13:42:58 2007 +0100
18779 [Microblaze][PATCH]
18781 interrupt controller support
18785 board information support
18787 booting image support
18789 adding support for Xilinx ML401
18791 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
18792 Author: Aubrey Li <aubrey.adi@gmail.com>
18793 Date: Sat Mar 10 23:49:29 2007 +0800
18795 [Blackfin][PATCH] code cleanup
18797 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
18798 Author: Aubrey.Li <aubrey.adi@gmail.com>
18799 Date: Fri Mar 9 13:40:56 2007 +0800
18801 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
18803 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
18804 Author: Aubrey.Li <aubrey.adi@gmail.com>
18805 Date: Fri Mar 9 13:38:44 2007 +0800
18807 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
18809 commit 992423ab43c2bcf6b704853bd00af77450915e20
18810 Author: Stefan Roese <sr@denx.de>
18811 Date: Thu Mar 8 23:00:08 2007 +0100
18813 ppc4xx: Fix file mode of sequoia.c
18815 Signed-off-by: Stefan Roese <sr@denx.de>
18817 commit eb92f613556800f7483666db09d9a237ad911d4a
18818 Author: Wolfgang Denk <wd@pollux.denx.de>
18819 Date: Thu Mar 8 22:52:51 2007 +0100
18823 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
18824 Author: John Otken john@softadvances.com <john@softadvances.com>
18825 Date: Thu Mar 8 09:39:48 2007 -0600
18827 ppc4xx: Clear Sequoia/Rainier security engine reset bits
18829 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
18831 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
18832 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18833 Date: Thu Mar 8 16:26:52 2007 +0100
18835 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
18837 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18839 commit d9fc703246840c4b268debf48c334ba55c597dc0
18840 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18841 Date: Thu Mar 8 16:25:47 2007 +0100
18843 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
18845 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18847 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
18848 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18849 Date: Thu Mar 8 16:23:11 2007 +0100
18851 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
18853 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18855 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
18856 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18857 Date: Thu Mar 8 16:20:32 2007 +0100
18859 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
18861 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18863 commit f9fc6a5852a6335840882fa2111925010eea1abe
18864 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18865 Date: Wed Mar 7 15:32:01 2007 +0100
18867 fixed ethernet phy configuration for plu405 board
18869 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18871 commit 769104c9356594deb2092e204a39c05b33202d6c
18872 Author: Wolfgang Denk <wd@pollux.denx.de>
18873 Date: Thu Mar 8 21:49:27 2007 +0100
18877 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
18878 Author: Stefan Roese <sr@denx.de>
18879 Date: Thu Mar 8 10:13:16 2007 +0100
18881 [PATCH] Update AMCC Luan 440SP eval board support
18883 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
18884 inititializition. This includes DDR auto calibration and support
18885 for different DIMM modules, instead of the fixed setup used in
18886 the earlier version.
18888 This patch also enables the cache in FLASH for the startup
18889 phase of U-Boot (while running from FLASH). After relocating to
18890 SDRAM the cache is disabled again. This will speed up the boot
18891 process, especially the SDRAM setup, since there are some loops
18892 for memory testing (auto calibration).
18894 Signed-off-by: Stefan Roese <sr@denx.de>
18896 commit 2f5df47351910a2936c7741cf111855829200943
18897 Author: Stefan Roese <sr@denx.de>
18898 Date: Thu Mar 8 10:10:18 2007 +0100
18900 [PATCH] Update AMCC Yucca 440SPe eval board support
18902 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
18903 inititializition. This includes DDR auto calibration and support
18904 for different DIMM modules, instead of the fixed setup used in
18905 the earlier version.
18907 Signed-off-by: Stefan Roese <sr@denx.de>
18909 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
18910 Author: Stefan Roese <sr@denx.de>
18911 Date: Thu Mar 8 10:07:18 2007 +0100
18913 ppc4xx: Small AMCC Katmai 440SPe update
18915 Signed-off-by: Stefan Roese <sr@denx.de>
18917 commit df294497479b1dca6dd86318b2a912f72fede0df
18918 Author: Stefan Roese <sr@denx.de>
18919 Date: Thu Mar 8 10:06:09 2007 +0100
18921 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
18923 Signed-off-by: Stefan Roese <sr@denx.de>
18925 commit 83853178bd36bca6f0f8f1331476620c84a587fc
18926 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18927 Date: Wed Mar 7 12:14:50 2007 -0600
18929 net - Support ping reply when processing net-loop
18931 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
18933 This permits the ping command to test the phy interface when the phy
18934 is put in loopback mode (typically by setting register 0 bit 14).
18936 It also allows the port to respond to an external ping when u-boot is
18937 processing some other net command (such as tftp). This is useful when
18938 tftp appears to hang.
18940 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18941 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18943 commit fa1aef15bcd47736687be1af544506e90fba545d
18944 Author: Stefan Roese <sr@denx.de>
18945 Date: Wed Mar 7 16:43:00 2007 +0100
18947 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
18949 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
18950 DDR memory are dynamically programmed matching the total size
18951 of the equipped memory (DIMM modules).
18953 Signed-off-by: Stefan Roese <sr@denx.de>
18955 commit e2ebe696818939e2b974628be9c921ea3fe9de13
18956 Author: Stefan Roese <sr@denx.de>
18957 Date: Wed Mar 7 16:39:36 2007 +0100
18959 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
18961 This patch fixes a problem that occurs when 2 DIMM's are
18962 used. This problem was first spotted and fixed by Gerald Jackson
18963 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
18964 problem in a little more clever way.
18966 This patch also adds the nice functionality to dynamically
18967 create the TLB entries for the SDRAM (tlb.c). So we should
18968 never run into such problems with wrong (too short) TLB
18969 initialization again on these platforms.
18971 As this feature is new to the "old" 44x SPD DDR driver, it
18972 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
18974 Signed-off-by: Stefan Roese <sr@denx.de>
18976 commit 39218433983417b9df087976a79e3f80dd5e83d6
18977 Author: Wolfgang Denk <wd@denx.de>
18978 Date: Wed Mar 7 16:33:44 2007 +0100
18980 UC101: fix compiler warnings
18982 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
18983 Author: Wolfgang Denk <wd@pollux.denx.de>
18984 Date: Wed Mar 7 16:19:46 2007 +0100
18986 HMI1001: fix build error, cleanup compiler warnings.
18988 commit ad5bb451ade552c44bef9119d907929ebc2c126f
18989 Author: Wolfgang Denk <wd@pollux.denx.de>
18990 Date: Tue Mar 6 18:08:43 2007 +0100
18992 Restructure POST directory to support of other CPUs, boards, etc.
18994 commit a5284efd125967675b2e9c6ef7b95832268ad360
18995 Author: Wolfgang Denk <wd@pollux.denx.de>
18996 Date: Tue Mar 6 18:01:47 2007 +0100
18998 Fix HOSTARCH handling.
18999 Patch by Mike Frysinger, Mar 05 2007
19001 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
19002 Author: Stefan Roese <sr@denx.de>
19003 Date: Tue Mar 6 07:47:04 2007 +0100
19005 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
19007 As provided by the AMCC applications team, this patch optimizes the
19008 DDR2 setup for 166MHz bus speed. The values provided are also save
19009 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
19010 setup has to be adjusted as done in this patch.
19012 For this the NAND booting version had to include the "speed.c" file
19013 from the cpu/ppc4xx directory. With this addition the NAND SPL image
19014 will just fit into the 4kbytes of program space. gcc version 4.x as
19015 provided with ELDK 4.x is needed to generate this optimized code.
19017 Signed-off-by: Stefan Roese <sr@denx.de>
19019 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
19020 Author: Wolfgang Denk <wd@pollux.denx.de>
19021 Date: Sun Mar 4 01:36:05 2007 +0100
19025 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
19026 Author: Kim Phillips <kim.phillips@freescale.com>
19027 Date: Wed Feb 28 00:02:04 2007 -0600
19029 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
19031 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
19033 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
19034 Author: Kumar Gala <galak@kernel.crashing.org>
19035 Date: Tue Feb 27 23:51:42 2007 -0600
19037 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
19039 The config value for:
19047 Were not being used when setting the appropriate register
19050 * CFG_SCCR_USBMPHCM
19055 To allow full config of the SCCR.
19057 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
19058 that were just bogus.
19060 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19062 commit d51b3cf371cd441030460ef19d36b2924c361b1a
19063 Author: Kim Phillips <kim.phillips@freescale.com>
19064 Date: Thu Feb 22 20:06:57 2007 -0600
19066 mpc83xx: update [local-]mac-address properties on UEC based devices
19068 8360 and 832x weren't updating their [local-]mac-address
19069 properties. This patch fixes that.
19071 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19073 commit 61f4f912acbe60776c5e00df1ec94094ce672957
19074 Author: Timur Tabi <timur@freescale.com>
19075 Date: Tue Feb 13 10:41:42 2007 -0600
19077 mpc83xx: write MAC address to mac-address and local-mac-address
19079 Some device trees have a mac-address property, some have local-mac-address,
19080 and some have both. To support all of these device trees, this patch
19081 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
19082 This function already updates local-mac-address.
19084 Signed-off-by: Timur Tabi <timur@freescale.com>
19086 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
19087 Author: Kim Phillips <kim.phillips@freescale.com>
19088 Date: Tue Feb 27 18:41:08 2007 -0600
19090 mpc83xx: add command line editing by default
19092 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
19093 Author: Kim Phillips <kim.phillips@freescale.com>
19094 Date: Wed Feb 14 19:50:53 2007 -0600
19096 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
19098 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
19099 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
19101 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
19103 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19104 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
19106 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
19107 Author: Xie Xiaobo <r63061@freescale.com>
19108 Date: Wed Feb 14 18:27:17 2007 +0800
19110 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
19112 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
19113 it pass DDR/DDR2 compliance tests.
19115 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
19117 commit b110f40bd180c6b560276589beedf753e97c46ce
19118 Author: Xie Xiaobo <r63061@freescale.com>
19119 Date: Wed Feb 14 18:27:06 2007 +0800
19121 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
19123 MPC8360E rev2.0 have new spridr,and PVR value,
19124 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
19126 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
19128 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
19129 Author: Xie Xiaobo <r63061@freescale.com>
19130 Date: Wed Feb 14 18:26:44 2007 +0800
19132 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
19134 MPC8349E rev3.1 have new spridr,and PVR value,
19135 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
19137 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
19139 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
19140 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
19141 Date: Wed Jan 31 11:04:19 2007 +0100
19143 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
19145 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
19146 which is used to se if an slave will ACK after receiving its address.
19148 Correct i2c probing to use this method as the old method could upset
19149 a slave as it wrote a data byte to it.
19151 Add a small delay in i2c_init() to let the controller
19152 shutdown any ongoing I2C activity.
19154 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
19156 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
19157 Author: Timur Tabi <timur@freescale.com>
19158 Date: Wed Jan 31 15:54:29 2007 -0600
19160 mpc83xx: Add support for the MPC8349E-mITX-GP
19162 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
19163 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
19164 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
19166 Signed-off-by: Timur Tabi <timur@freescale.com>
19168 commit fab16807adad350f618024350c6950165c247c72
19169 Author: Timur Tabi <timur@freescale.com>
19170 Date: Wed Jan 31 15:54:20 2007 -0600
19172 mpc83xx: Delete sdram_init() for MPC8349E-mITX
19174 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
19175 never does anything. This patch deletes it.
19177 Signed-off-by: Timur Tabi <timur@freescale.com>
19179 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
19180 Author: Dave Liu <daveliu@freescale.com>
19181 Date: Fri Jan 19 10:43:26 2007 +0800
19183 mpc83xx: Fix the LAW1/3 bug
19185 The patch solves the alignment problem of the local bus access windows to
19186 render accessible the memory bank and PHY registers of UPC 1 (starting at
19187 0xf801 0000). What we actually did was to adjust the sizes of the bus
19188 access windows so that the base address alignment requirement would be met.
19190 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
19191 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
19192 Signed-off-by: Dave Liu <daveliu@freescale.com>
19194 commit 97c4b397dce236a7318b304667bf89e59d08b17c
19195 Author: Kim Phillips <kim.phillips@freescale.com>
19196 Date: Tue Jan 30 16:15:31 2007 -0600
19198 mpc83xx: don't hang if watchdog configured on 8360, 832x
19200 don't hang if watchdog configured on 8360, 832x
19202 The watchdog programming model is the same across all 83xx devices;
19203 make the code reflect that.
19205 commit b70047478570e371ce7223be342ce98afea0f7d6
19206 Author: Kim Phillips <kim.phillips@freescale.com>
19207 Date: Tue Jan 30 16:15:21 2007 -0600
19209 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
19211 protect memcpy to bad address if a local-mac-address is missing from dt
19213 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
19214 Author: Kim Phillips <kim.phillips@freescale.com>
19215 Date: Tue Jan 30 16:15:04 2007 -0600
19217 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
19219 make 8360 default environment fdt be 8360 (not 8349)
19221 commit a28899c910024a0226331df07207b1038c300c93
19222 Author: Emilian Medve <Emilian.Medve@freescale.com>
19223 Date: Tue Jan 30 16:14:50 2007 -0600
19225 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
19227 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
19228 be used for busy-waiting since it strips the 'volatile' property from
19229 the bd variable. gcc3 was working by pure luck.
19231 This is a follow on patch to "Fix the UEC driver bug of QE"
19233 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
19234 Author: Kumar Gala <galak@kernel.crashing.org>
19235 Date: Tue Jan 30 14:08:30 2007 -0600
19237 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
19239 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
19240 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
19241 CONFIG_MPC834X so they are more generic.
19243 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19245 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
19246 Author: Kim Phillips <kim.phillips@freescale.com>
19247 Date: Thu Jan 25 13:40:55 2007 -0600
19249 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
19251 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
19252 Author: Kim Phillips <kim.phillips@freescale.com>
19253 Date: Wed Jan 24 17:18:37 2007 -0600
19255 mpc83xx: sort Makefile targets
19257 reordered targets alphabetically
19259 commit 91e25769771c1164ed63ffca0add49f934ae3343
19260 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
19261 Date: Tue Jan 16 11:38:14 2007 -0500
19263 mpc83xx: U-Boot support for Wind River SBC8349
19265 I've redone the SBC8349 support to match git-current, which
19266 incorporates all the MPC834x updates from Freescale since the 1.1.6
19267 release, including the DDR changes.
19269 I've kept all the SBC8349 files as parallel as possible to the
19270 MPC8349EMDS ones for ease of maintenance and to allow for easy
19271 inspection of what was changed to support this board. Hence the SBC8349
19272 U-Boot has FDT support and everything else that the MPC8349EMDS has.
19274 Fortunately the Freescale updates added support for boards using CS0,
19275 but I had to change spd_sdram.c to allow for board specific settings for
19276 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
19277 default if the board doesn't specify a value.)
19279 Hopefully this should be mergeable as-is and require no whitespace
19280 cleanups or similar, but if something doesn't measure up then let me
19281 know and I'll fix it.
19286 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
19287 Author: Sam Song <samsongshu@yahoo.com.cn>
19288 Date: Thu Dec 14 19:03:21 2006 +0800
19290 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
19292 A redundant semicolon existed in mpc8349itx.c
19295 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
19297 commit f35f358241c549be3f75cfe2eaa642914275b7ba
19298 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
19299 Date: Wed Dec 6 21:23:55 2006 -0500
19301 mpc83xx: Put the version (and magic) after the HRCW.
19303 Put the version (and magic) after the HRCW. This puts it in a fixed
19304 location in flash, not at the start of flash but as close as we can get.
19306 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
19308 commit 48aecd969171a6e99a55fae04933857787f9a5bd
19309 Author: Dave Liu <r63238@freescale.com>
19310 Date: Thu Dec 7 21:14:51 2006 +0800
19312 mpc83xx: Add the MPC832XEMDS board readme
19314 Add the MPC832XEMDS board readme
19316 Signed-off-by: Dave Liu <daveliu@freescale.com>
19318 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
19319 Author: Dave Liu <r63238@freescale.com>
19320 Date: Thu Dec 7 21:13:15 2006 +0800
19322 mpc83xx: Add support for the MPC832XEMDS board
19324 This patch supports DUART, ETH3/4 and PCI etc.
19326 Signed-off-by: Dave Liu <daveliu@freescale.com>
19328 commit e080313c32322e15ab5a18eb896a252858c57284
19329 Author: Dave Liu <r63238@freescale.com>
19330 Date: Thu Dec 7 21:11:58 2006 +0800
19332 mpc83xx: streamline the 83xx immr head file
19334 For better format and style, I streamlined the 83xx head files,
19335 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
19336 duplicated macro definition appear in the both files; 2) the structure
19337 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
19338 macro definition put inside the each structure. So, I cleaned up the
19339 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
19340 moved the macro definition to mpc83xx.h, Just like MPC8260.
19344 *streamline the 83xx immr head file
19346 Signed-off-by: Dave Liu <daveliu@freescale.com>
19348 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
19349 Author: Dave Liu <r63238@freescale.com>
19350 Date: Wed Dec 6 11:38:17 2006 +0800
19352 mpc83xx: Fix the UEC driver bug of QE
19354 The patch prevents the GCC tool chain from striping useful code for
19355 optimization. It will make UEC ethernet driver workable, Otherwise the
19356 UEC will fail in tx when you are using gcc4.x. but the driver can work
19357 when using gcc3.4.3.
19361 *Prevent the GCC from striping code for optimization, Otherwise the UEC
19362 will tx failed when you are using gcc4.x.
19364 Signed-off-by: Dave Liu <daveliu@freescale.com>
19366 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
19367 Author: Stefan Roese <sr@denx.de>
19368 Date: Thu Mar 1 21:11:36 2007 +0100
19370 [PATCH] Update AMCC Katmai 440SPe eval board support
19372 This patch updates the recently added Katmai board support. The biggest
19373 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
19376 Please note, that still some problems are left with some memory
19377 configurations. See the driver for more details.
19379 Signed-off-by: Stefan Roese <sr@denx.de>
19381 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
19382 Author: Stefan Roese <sr@denx.de>
19383 Date: Thu Mar 1 07:03:25 2007 +0100
19385 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
19387 Signed-off-by: Stefan Roese <sr@denx.de>
19389 commit ccbc7036648e465697ca298ba51e0e76dda352a0
19390 Author: Wolfgang Denk <wd@pollux.denx.de>
19391 Date: Wed Feb 28 01:28:53 2007 +0100
19393 SC3: fix typo in default environment
19395 commit e344568b1b46af85ec32d815586f91bc115d6223
19396 Author: Sergei Poselenov <sposelenov@emcraft.com>
19397 Date: Tue Feb 27 20:15:30 2007 +0300
19399 MCC200: Fixes for update procedure
19401 - fix logic error in image type handling
19402 - make sure file system images (cramfs etc.) get stored in flash
19403 with image header stripped so they can be mounted through MTD
19405 commit 743571145b37182757d4e688a77860b36ee77573
19406 Author: Wolfgang Denk <wd@pollux.denx.de>
19407 Date: Tue Feb 27 14:26:04 2007 +0100
19409 Minor code cleanup.
19411 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
19412 Author: Sergei Poselenov <sposelenov@emcraft.com>
19413 Date: Tue Feb 27 12:40:16 2007 +0300
19415 MCC200 update - add LCD Progress Indicator
19417 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
19418 Author: Stefan Roese <sr@denx.de>
19419 Date: Thu Feb 22 07:43:34 2007 +0100
19421 [PATCH] get_dev() now unconditionally uses manual relocation
19423 Since the relocation fix is not included yet and we're not sure how
19424 it will be added, this patch removes code that required relocation
19425 to be fixed for now.
19427 Signed-off-by: Stefan Roese <sr@denx.de>
19429 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
19430 Author: Stefan Roese <sr@denx.de>
19431 Date: Thu Feb 22 07:40:23 2007 +0100
19433 [PATCH] Change systemace driver to select 8 & 16bit mode
19435 As suggested by Grant Likely this patch enables the Xilinx SystemACE
19436 driver to select 8 or 16bit mode upon startup.
19438 Signed-off-by: Stefan Roese <sr@denx.de>
19440 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
19441 Author: Haiying Wang <Haiying.Wang@freescale.com>
19442 Date: Wed Feb 21 16:52:31 2007 +0100
19444 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
19446 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
19447 is fully finished. The sync() is defined in each CPU's io.h file. For
19448 those CPUs which do not need sync for now, a dummy sync() is defined in
19449 their io.h as well.
19451 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
19453 commit da04995c7dc6772013a9a0dc5c767f190c402478
19454 Author: Stefan Roese <sr@denx.de>
19455 Date: Wed Feb 21 13:44:34 2007 +0100
19457 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
19459 Signed-off-by: Stefan Roese <sr@denx.de>
19461 commit 751bb57107d78978ae08e697c3deba816f5be091
19462 Author: Stefan Roese <sr@denx.de>
19463 Date: Tue Feb 20 13:21:57 2007 +0100
19465 [PATCH] Fix relocation problem with "new" get_dev() function
19467 This patch enables the "new" get_dev() function for block devices
19468 introduced by Grant Likely to be used on systems that still suffer
19469 from the relocation problems (manual relocation neede because of
19470 problems with linker script).
19472 Hopefully we can resolve this relocation issue soon for all platform
19473 so we don't need this additional code anymore.
19475 Signed-off-by: Stefan Roese <sr@denx.de>
19477 commit d93e2212f962668b3dce091ff5edc33f2347fe37
19478 Author: Stefan Roese <sr@denx.de>
19479 Date: Tue Feb 20 13:17:42 2007 +0100
19481 [PATCH] Update SystemACE driver for 16bit access
19483 This patch removes some problems when the Xilinx SystemACE driver
19484 is used with 16bit access on an big endian platform (like the
19487 Signed-off-by: Stefan Roese <sr@denx.de>
19489 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
19490 Author: Stefan Roese <sr@denx.de>
19491 Date: Tue Feb 20 13:15:40 2007 +0100
19493 [PATCH] Clean up Katmai (440SPe) linker script
19495 Signed-off-by: Stefan Roese <sr@denx.de>
19497 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
19498 Author: Stefan Roese <sr@denx.de>
19499 Date: Tue Feb 20 10:57:08 2007 +0100
19501 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
19503 Signed-off-by: Stefan Roese <sr@denx.de>
19505 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
19506 Author: Stefan Roese <sr@denx.de>
19507 Date: Tue Feb 20 10:51:26 2007 +0100
19509 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
19511 This patch switches to the desired I2C bus when the date/dtt
19512 commands are called. This can be configured using the
19513 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
19515 Signed-off-by: Stefan Roese <sr@denx.de>
19517 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
19518 Author: Stefan Roese <sr@denx.de>
19519 Date: Tue Feb 20 10:43:34 2007 +0100
19521 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
19523 This patch adds support for the DDR2 controller used on the
19524 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
19525 board and works fine with the following DIMM modules:
19527 - Corsair CM2X512-5400C4 (512MByte per DIMM)
19528 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
19529 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
19531 This patch also adds the nice functionality to dynamically
19532 create the TLB entries for the SDRAM (tlb.c). So we should
19533 never run into such problems with wrong (too short) TLB
19534 initialization again on these platforms.
19536 Signed-off-by: Stefan Roese <sr@denx.de>
19538 commit 36d830c9830379045f5daa9f542ac1c990c70068
19539 Author: Stefan Roese <sr@denx.de>
19540 Date: Tue Feb 20 10:35:42 2007 +0100
19542 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
19544 Since the existing 4xx SPD SDRAM initialization routines for the
19545 405 SDRAM controller and the 440 DDR controller don't have much in
19546 common this patch splits both drivers into different files.
19548 This is in preparation for the 440 DDR2 controller support (440SP/e).
19550 Signed-off-by: Stefan Roese <sr@denx.de>
19552 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
19553 Author: Stefan Roese <sr@denx.de>
19554 Date: Tue Feb 20 10:27:08 2007 +0100
19556 [PATCH] PPC4xx: Add support for multiple I2C busses
19558 This patch adds support for multiple I2C busses on the PPC4xx
19559 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
19560 to make use of this feature.
19562 It also merges the 405 and 440 i2c header files into one common
19565 Also the 4xx i2c reset procedure is reworked since I experienced
19566 some problems with the first access on the 440SPe Katmai board.
19568 Signed-off-by: Stefan Roese <sr@denx.de>
19570 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
19571 Author: Grant Likely <grant.likely@secretlab.ca>
19572 Date: Tue Feb 20 09:05:45 2007 +0100
19574 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
19576 Block device read/write is anonymous data; there is no need to use a
19577 typed pointer. void * is fine. Also add a hook for block_read functions
19579 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19581 commit 53758fa20e935cc87eeb0519ed365df753a6f289
19582 Author: Grant Likely <grant.likely@secretlab.ca>
19583 Date: Tue Feb 20 09:05:38 2007 +0100
19585 [PATCH 8_9] Add block_write hook to block_dev_desc_t
19587 Preparation for future patches which support block device writing
19589 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19591 commit f4852ebe6ca946a509667eb68be42026f837be76
19592 Author: Grant Likely <grant.likely@secretlab.ca>
19593 Date: Tue Feb 20 09:05:31 2007 +0100
19595 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
19597 Register read/write does not need to be wrapped in a full function. The
19598 patch replaces them with macros.
19600 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19602 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
19603 Author: Grant Likely <grant.likely@secretlab.ca>
19604 Date: Tue Feb 20 09:05:23 2007 +0100
19606 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
19608 The code in this file is not a command; it is a device driver. Put it in
19609 the correct place. There are zero functional changes in this patch, it
19610 only moves the file.
19612 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19614 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
19615 Author: Grant Likely <grant.likely@secretlab.ca>
19616 Date: Tue Feb 20 09:05:16 2007 +0100
19618 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
19620 This patch is in preparation of additional changes to the sysace driver.
19621 May as well take this opportunity to fixup the inconsistent whitespace since
19622 this file is about to undergo major changes anyway.
19624 There are zero functional changes in this patch. It only cleans up the
19627 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19629 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
19630 Author: Grant Likely <grant.likely@secretlab.ca>
19631 Date: Tue Feb 20 09:05:07 2007 +0100
19633 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
19635 isprint is already defined in ctype.c
19637 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19639 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
19640 Author: Grant Likely <grant.likely@secretlab.ca>
19641 Date: Tue Feb 20 09:05:00 2007 +0100
19643 [PATCH 3_9] Move buffer print code from md command to common function
19645 Printing a buffer is a darn useful thing. Move the buffer print code
19646 into print_buffer() in lib_generic/
19648 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19650 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
19651 Author: Grant Likely <grant.likely@secretlab.ca>
19652 Date: Tue Feb 20 09:04:52 2007 +0100
19654 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
19656 Change the xilinx device drivers and board code to include config.h
19657 instead of xparameters.h directly. config.h always includes the
19658 correct xparameters file. This change reduces the posibility of
19659 including the wrong file when adding a new xilinx board port
19661 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19663 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
19664 Author: Grant Likely <grant.likely@secretlab.ca>
19665 Date: Tue Feb 20 09:04:34 2007 +0100
19667 [PATCH 1_4] Merge common get_dev() routines for block devices
19669 Each of the filesystem drivers duplicate the get_dev routine. This change
19670 merges them into a single function in part.c
19672 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19674 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
19675 Author: Wolfgang Denk <wd@pollux.denx.de>
19676 Date: Mon Feb 19 23:09:51 2007 +0100
19678 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
19679 as root file system images.
19681 commit 489c696ae7211218961d159e43e722d74c36fcbc
19682 Author: Sergei Poselenov <sposelenov@emcraft.com>
19683 Date: Wed Feb 14 14:30:28 2007 +0300
19685 MCC200: Extensions to Software Update Mechanism
19687 Update / extend Software Update Mechanism for MCC200 board:
19689 - Add support for rootfs image added. The environment variables
19690 "rootfs_st" and "rootfs_nd" can be used to override the default
19691 values of the image start and end.
19692 - Remove excessive key check code.
19695 commit 4be23a12f23f1372634edc3215137b09768b7949
19696 Author: Stefan Roese <sr@denx.de>
19697 Date: Mon Feb 19 08:23:15 2007 +0100
19699 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
19701 As spotted by Matthias Fuchs, the READY input should not be
19702 enabled for the NOR FLASH on the Sequoia board.
19704 Signed-off-by: Stefan Roese <sr@denx.de>
19706 commit 2605e90bf676d48123afe5719a846d2b52b24aac
19707 Author: Heiko Schocher <hs@pollux.denx.de>
19708 Date: Fri Feb 16 07:57:42 2007 +0100
19710 [PATCH] Added support for the jupiter board.
19712 Signed-off-by: Heiko Schocher <hs@denx.de>
19714 commit 497d012e5be0194e1084073d0081eb1a844796b2
19715 Author: Gary Jennejohn <garyj@pollux.denx.de>
19716 Date: Mon Feb 12 13:11:50 2007 +0100
19718 LPC2292: patch from Siemens.
19720 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
19721 Author: Stefan Roese <sr@denx.de>
19722 Date: Sat Feb 10 08:49:31 2007 +0100
19724 [PATCH] Add missing p3mx.h file to repository (ups)
19726 Signed-off-by: Stefan Roese <sr@denx.de>
19728 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
19729 Author: Bartlomiej Sieka <tur@semihalf.com>
19730 Date: Fri Feb 9 10:45:42 2007 +0100
19732 [Motion-PRO] Preliminary support for the Motion-PRO board.
19734 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
19735 Author: Stefan Roese <sr@denx.de>
19736 Date: Wed Feb 7 16:51:08 2007 +0100
19738 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
19740 Some boards that can have more than 768MBytes of SDRAM need to
19741 set "initrd_high", so that the initrd can be accessed by the
19744 Signed-off-by: Stefan Roese <sr@denx.de>
19746 commit 7372ca68227930d03cffa548310524cad5b96733
19747 Author: Stefan Roese <sr@denx.de>
19748 Date: Fri Feb 2 12:44:22 2007 +0100
19750 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
19752 Previously the strapping DCR/SDR was read to determine if the internal PCI
19753 arbiter is enabled or not. This strapping bit can be overridden, so now
19754 the current status is read from the correct DCR/SDR register.
19756 Signed-off-by: Stefan Roese <sr@denx.de>
19758 commit 2aa54f651a42d198673318f07a20c89a43e4d197
19759 Author: Stefan Roese <sr@denx.de>
19760 Date: Fri Feb 2 12:42:08 2007 +0100
19762 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
19764 Signed-off-by: Stefan Roese <sr@denx.de>
19766 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
19767 Author: Stefan Roese <sr@denx.de>
19768 Date: Thu Feb 1 13:22:41 2007 +0100
19770 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
19772 When PCI PNP is enabled the pci pnp configuration routine is called
19773 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
19774 problems with some PCI cards. For now disable the PCI PNP configuration.
19776 Signed-off-by: Stefan Roese <sr@denx.de>
19778 commit 2902fadade3be7659467e8d074048c6b7068f5c0
19779 Author: Stefan Roese <sr@denx.de>
19780 Date: Wed Jan 31 16:56:10 2007 +0100
19782 [PATCH] Update 440EPx/440GRx cpu detection
19784 Signed-off-by: Stefan Roese <sr@denx.de>
19786 commit d5ea287b02a6945c3977410e364a879dd1a555c8
19787 Author: Stefan Roese <sr@denx.de>
19788 Date: Wed Jan 31 16:38:04 2007 +0100
19790 [PATCH] Update esd cpci5200 files
19792 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
19794 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
19795 Author: Stefan Roese <sr@denx.de>
19796 Date: Wed Jan 31 16:37:34 2007 +0100
19798 [PATCH] Add support for esd mecp5200 board
19800 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
19802 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
19803 Author: Stefan Roese <sr@denx.de>
19804 Date: Wed Jan 31 12:38:50 2007 +0100
19806 [PATCH] Remove unneccessary yellowstone board config file
19808 Signed-off-by: Stefan Roese <sr@denx.de>
19810 commit e802594b6fa1b166308820c276b96dc0d7cc731c
19811 Author: Stefan Roese <sr@denx.de>
19812 Date: Tue Jan 30 17:06:10 2007 +0100
19814 [PATCH] Update Sequoia (440EPx) config file
19816 The config file now handles the 2nd target, the Rainier (440GRx)
19817 evaluation board better. Additionally the PPC input clock was
19818 adjusted to match the correct value of 33.0 MHz.
19820 Signed-off-by: Stefan Roese <sr@denx.de>
19822 commit 700200c67e73b83751418abe7815840dca8fd6cb
19823 Author: Stefan Roese <sr@denx.de>
19824 Date: Tue Jan 30 17:04:19 2007 +0100
19826 [PATCH] Merge Yosemite & Yellowstone board ports
19828 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
19829 share one config file and all board specific files. This way we
19830 don't have to maintain two different sets of files for nearly
19833 Signed-off-by: Stefan Roese <sr@denx.de>
19835 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
19836 Author: Stefan Roese <sr@denx.de>
19837 Date: Tue Jan 30 15:01:49 2007 +0100
19839 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
19841 SCPU doesn't use redundant environment in flash.
19843 Signed-off-by: Stefan Roese <sr@denx.de>
19845 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
19846 Author: Stefan Roese <sr@denx.de>
19847 Date: Tue Jan 30 12:51:07 2007 +0100
19849 [PATCH] alpr: Update alpr board config file
19851 Signed-off-by: Stefan Roese <sr@denx.de>
19853 commit f8db84f132b1e335f20f96138a1f09ed97b08664
19854 Author: Wolfgang Denk <wd@pollux.denx.de>
19855 Date: Tue Jan 30 00:50:40 2007 +0100
19857 LPC2292 SODIMM port coding style cleanup.
19859 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
19860 Author: Gary Jennejohn <garyj@pollux.denx.de>
19861 Date: Wed Jan 24 12:16:56 2007 +0100
19863 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
19865 commit 2daf046ba627f85f44195815778140039636244e
19866 Author: Bartlomiej Sieka <tur@semihalf.com>
19867 Date: Tue Jan 23 17:22:06 2007 +0100
19869 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
19871 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
19872 Author: Bartlomiej Sieka <tur@semihalf.com>
19873 Date: Tue Jan 23 14:21:14 2007 +0100
19875 [iDMR] Flash driver on initialisation write-protects some sectors,
19876 currently sectors 0-3. Sector 3 does not need to be protected, though
19877 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
19878 fixes this, i.e., only sectors 0-2 are protected.
19880 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
19881 Author: Bartlomiej Sieka <tur@semihalf.com>
19882 Date: Tue Jan 23 14:11:22 2007 +0100
19884 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
19885 "mii device" results in "Unexpected exception"). Fixing this properly
19886 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
19887 this commit disables MII commads for now.
19889 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
19890 Author: Bartlomiej Sieka <tur@semihalf.com>
19891 Date: Tue Jan 23 13:25:22 2007 +0100
19893 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
19894 Identification Register (CIR).
19896 commit fdef388758506765d4d6a7155c8f1584c63ff581
19897 Author: roy zang <tie-fei.zang@freescale.com>
19898 Date: Mon Jan 22 13:19:21 2007 +0800
19900 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
19901 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
19902 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
19905 commit a4012396645533aef218354eeba754dff0deace8
19906 Author: Wolfgang Denk <wd@pollux.denx.de>
19907 Date: Fri Jan 19 23:08:39 2007 +0100
19909 Minor code cleanup.
19911 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
19912 Author: Heiko Schocher <hs@pollux.denx.de>
19913 Date: Fri Jan 19 19:57:10 2007 +0100
19915 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
19917 Signed-off-by: Heiko Schocher <hs@denx.de>
19919 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
19920 Author: Heiko Schocher <hs@pollux.denx.de>
19921 Date: Fri Jan 19 18:05:26 2007 +0100
19923 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
19924 if you must swap the bytes between reading/writing.
19925 (Needed for the SC3 board)
19927 Signed-off-by: Heiko Schocher <hs@denx.de>
19929 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
19930 Author: Stefan Roese <sr@denx.de>
19931 Date: Thu Jan 18 16:05:47 2007 +0100
19933 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
19935 Signed-off-by: Stefan Roese <sr@denx.de>
19937 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
19938 Author: Stefan Roese <sr@denx.de>
19939 Date: Thu Jan 18 11:54:52 2007 +0100
19941 [PATCH] Update Prodrive P3Mx support
19943 Signed-off-by: Stefan Roese <sr@denx.de>
19945 commit 34167a36c29ee946b727465db5c014746a08e978
19946 Author: Stefan Roese <sr@denx.de>
19947 Date: Thu Jan 18 11:48:10 2007 +0100
19949 [PATCH] Add missing Taishan config file
19951 Signed-off-by: Stefan Roese <sr@denx.de>
19953 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
19954 Author: Heiko Schocher <hs@pollux.denx.de>
19955 Date: Thu Jan 18 11:28:51 2007 +0100
19957 [PATCH] Fix: Compilerwarnings for SC3 board.
19958 The EBC Configuration Register is now by CFG_EBC_CFG definable
19959 Added JFFS2 support for the SC3 board.
19961 Signed-off-by: Heiko Schocher <hs@denx.de>
19963 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
19964 Author: Stefan Roese <sr@denx.de>
19965 Date: Thu Jan 18 10:25:34 2007 +0100
19967 [PATCH] Add support for AMCC Taishan PPC440GX eval board
19969 Signed-off-by: Stefan Roese <sr@denx.de>
19971 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
19972 Author: Wolfgang Denk <wd@pollux.denx.de>
19973 Date: Tue Jan 16 18:30:50 2007 +0100
19975 Raname solidcard3 into sc3; add redundant env for sc3
19977 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
19978 Author: Wolfgang Denk <wd@pollux.denx.de>
19979 Date: Tue Jan 16 12:46:35 2007 +0100
19981 Update default environment for Solidcard3
19983 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
19984 Author: Stefan Roese <sr@denx.de>
19985 Date: Mon Jan 15 09:46:29 2007 +0100
19987 [PATCH] Fix 440SPe rev B detection from previous patch
19989 Signed-off-by: Stefan Roese <sr@denx.de>
19991 commit a443d31410c571ee8f970da819a44d698fdd6b1f
19992 Author: Heiko Schocher <hs@pollux.denx.de>
19993 Date: Sun Jan 14 13:35:31 2007 +0100
19995 [FIX] correct I2C Writes for the LM81 Sensor.
19997 Signed-off-by: Heiko Schocher <hs@denx.de>
19999 commit 0bba5452835f19a61204edcda3a58112fd8e2208
20000 Author: Wolfgang Denk <wd@pollux.denx.de>
20001 Date: Sat Jan 13 11:17:10 2007 +0100
20003 Undo commit 3033ebb2: reset command does not take any arguments
20005 Haiying Wang's modification to the reset command was broken, undo it.
20007 Signed-off-by: Wolfgang Denk <wd@denx.de>
20009 commit 95981778cff0038fd9941044d6a3eda810e33258
20010 Author: Stefan Roese <sr@denx.de>
20011 Date: Sat Jan 13 08:01:03 2007 +0100
20013 [PATCH] Update 440SP(e) cpu revisions
20015 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
20017 Signed-off-by: Stefan Roese <sr@denx.de>
20019 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
20020 Author: Stefan Roese <sr@denx.de>
20021 Date: Sat Jan 13 07:59:56 2007 +0100
20023 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
20025 Now the board revision and the current PCI bus speed are printed after
20028 Also the EBC initialising is now done via defines in the board config
20031 Signed-off-by: Stefan Roese <sr@denx.de>
20033 commit 36adff362c2c0141ff8a810d42a7e478f779130f
20034 Author: Stefan Roese <sr@denx.de>
20035 Date: Sat Jan 13 07:59:19 2007 +0100
20037 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
20039 Now the board revision and the current PCI bus speed are printed after
20042 Also the EBC initialising is now done via defines in the board config
20045 Signed-off-by: Stefan Roese <sr@denx.de>
20047 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
20048 Author: Stefan Roese <sr@denx.de>
20049 Date: Sat Jan 13 07:57:51 2007 +0100
20051 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
20053 Now the board revision and the current PCI bus speed are printed after
20056 Signed-off-by: Stefan Roese <sr@denx.de>
20058 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
20059 Author: Heiko Schocher <hs@pollux.denx.de>
20060 Date: Thu Jan 11 15:44:44 2007 +0100
20062 Added support for the SOLIDCARD III board from Eurodesign
20064 Signed-off-by: Heiko Schocher <hs@denx.de>
20066 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
20067 Author: Reinhard Thies <Reinhard.Thies@web.de>
20068 Date: Wed Jan 10 14:41:14 2007 +0100
20070 Adjusted default environment for cam5200 board.
20072 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
20073 Author: Wolfgang Denk <wd@pollux.denx.de>
20074 Date: Wed Jan 10 15:35:52 2007 +0100
20078 commit 787fa15860a57833e50bd30555079a9cd4e519b8
20079 Author: Wolfgang Denk <wd@pollux.denx.de>
20080 Date: Wed Jan 10 01:28:39 2007 +0100
20082 Fix auto_update for MCC200 board.
20084 The invocation of do_auto_update() is moved to the end of the
20085 misc_init_r() function, after the flash mappings have been
20086 initialized. Please find attached a patch that implements that
20089 Also correct the decoding of the keypad status. With this update, the
20090 key that will trigger the update is Column 2, Row 2.
20092 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
20093 Author: Marian Balakowicz <m8@semihalf.com>
20094 Date: Wed Jan 10 00:26:15 2007 +0100
20096 CAM5200 flash driver modifications:
20097 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
20098 - add second build target 'cam5200_niosflash' which still uses custom driver
20100 commit 67fea022fa957f59653b5238c7496f80a6b70432
20101 Author: Markus Klotzbuecher <mk@denx.de>
20102 Date: Tue Jan 9 16:02:48 2007 +0100
20104 SPC1920: cleanup memory contoller setup
20106 commit 8fc2102faa23593c80381437c09f7745a14deb40
20107 Author: Markus Klotzbuecher <mk@denx.de>
20108 Date: Tue Jan 9 14:57:14 2007 +0100
20110 Fix the cpu speed setup to work with all boards.
20112 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
20113 Author: Markus Klotzbuecher <mk@denx.de>
20114 Date: Tue Jan 9 14:57:13 2007 +0100
20116 SPC1920: add support for the FM18L08 Ramtron FRAM
20118 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
20119 Author: Markus Klotzbuecher <mk@denx.de>
20120 Date: Tue Jan 9 14:57:13 2007 +0100
20122 SPC1920: update the HPI register addresses to work with the second
20123 generation of hardware
20125 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
20126 Author: Markus Klotzbuecher <mk@creamnet.de>
20127 Date: Tue Jan 9 14:57:13 2007 +0100
20129 Miscellanious spc1920 related cleanups
20131 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
20132 Author: Markus Klotzbuecher <mk@denx.de>
20133 Date: Tue Jan 9 14:57:12 2007 +0100
20135 SPC1920 GO/NOGO led should be set to color red in U-Boot
20137 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
20138 Author: Markus Klotzbuecher <mk@creamnet.de>
20139 Date: Tue Jan 9 14:57:12 2007 +0100
20141 Add support for the DS3231 RTC
20143 commit 8139567b60d678584b05f0718a681f2047c5e14f
20144 Author: Markus Klotzbuecher <mk@creamnet.de>
20145 Date: Tue Jan 9 14:57:11 2007 +0100
20147 SMC1 uses external CLK4 instead of BRG on spc1920
20149 commit d8d9de1a02fbd880b613d607143d1f57342affc7
20150 Author: Markus Klotzbuecher <mk@creamnet.de>
20151 Date: Tue Jan 9 14:57:10 2007 +0100
20153 Update the SPC1920 CMB PLD driver
20155 commit 3f34f869162750e5e999fd140f884f5de952bcfe
20156 Author: Markus Klotzbuecher <mk@creamnet.de>
20157 Date: Tue Jan 9 14:57:10 2007 +0100
20159 Add / enable I2C support on the spc1920 board
20161 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
20162 Author: Markus Klotzbuecher <mk@creamnet.de>
20163 Date: Tue Jan 9 14:57:10 2007 +0100
20165 Add support for the tms320671x host port interface (HPI)
20167 commit f4eb54529bb3664c3a562e488b460fe075f79d67
20168 Author: Wolfgang Denk <wd@pollux.denx.de>
20169 Date: Sun Jan 7 00:13:11 2007 +0100
20171 Prepare for release 1.2.0
20173 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
20174 Author: Stefan Roese <sr@denx.de>
20175 Date: Sat Jan 6 15:58:09 2007 +0100
20177 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
20179 This patch fixes a problem with an incorrect setup for the refresh
20180 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
20182 Signed-off-by: Stefan Roese <sr@denx.de>
20184 commit f16c1da9577f06c5fc08651a4065537407de4635
20185 Author: Stefan Roese <sr@denx.de>
20186 Date: Sat Jan 6 15:56:13 2007 +0100
20188 [PATCH] Update ALPR board files
20190 This update brings the ALPR board support to the newest version.
20191 It also fixes a problem with the NAND driver.
20193 Signed-off-by: Stefan Roese <sr@denx.de>
20195 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
20196 Author: Stefan Roese <sr@denx.de>
20197 Date: Fri Jan 5 11:46:05 2007 +0100
20199 [PATCH] nand: Fix problem with oobsize calculation
20201 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
20203 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
20204 returns a 0x15. In the code fragment below bits [1:0] determine the
20205 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
20206 next field is also ANDed with 0x3. However this is a one bit field
20207 as defined in the Hynix and Samsung parts in the 4th ID byte that
20208 determins the oobsize, not a two bit field. It works on Samsung as
20209 bits[3:2] are 01. However for the Hynix there is a 11 in these two
20210 bits, so the oob size gets messed up.
20212 I checked the correct linux code and the suggested fix from Brian is
20213 also available in the linux nand mtd driver.
20215 Signed-off-by: Stefan Roese <sr@denx.de>
20217 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
20218 Author: Stefan Roese <sr@denx.de>
20219 Date: Fri Jan 5 10:40:36 2007 +0100
20221 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
20223 This fix will make the MAL burst disabling patch for the Linux
20224 EMAC driver obsolete.
20226 Signed-off-by: Stefan Roese <sr@denx.de>
20228 commit 023889838282b6237b401664f22dd22dfba2c066
20229 Author: Stefan Roese <sr@denx.de>
20230 Date: Fri Jan 5 10:38:05 2007 +0100
20232 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
20234 This code will optimize the DDR2 controller setup on a board specific
20237 Note: This code doesn't work right now on the NAND booting image for the
20238 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
20240 Signed-off-by: Stefan Roese <sr@denx.de>
20242 commit cce4acbb68398634b8d011ed7bb0d12269c84230
20243 Author: Bartlomiej Sieka <tur@semihalf.com>
20244 Date: Thu Dec 28 19:08:21 2006 +0100
20247 - fix a typo in V38B config file
20248 - move watchdog initialisation earlier in the boot process
20249 - add "wdt=off" to default kernel command line (disables kernel watchdog)
20251 commit 92eb729bad876725aeea908d2addba0800620840
20252 Author: Wolfgang Denk <wd@pollux.denx.de>
20253 Date: Wed Dec 27 01:26:13 2006 +0100
20255 Fix bug in adaption of Stefano Babic's CFI driver patch.
20257 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
20258 Author: Wolfgang Denk <wd@pollux.denx.de>
20259 Date: Sun Dec 24 01:42:57 2006 +0100
20261 Minor code cleanup.
20263 commit d784fdb05900ada3686d5778783e1fb328e9fb66
20264 Author: Stefano Babic <sbabic@denx.de>
20265 Date: Tue Dec 12 00:22:42 2006 +0100
20267 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
20269 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
20270 Author: Stefan Roese <sr@denx.de>
20271 Date: Fri Dec 22 14:29:40 2006 +0100
20273 [PATCH] Fix sequoia flash autodetection (finally correct)
20275 Now 32MByte and 64MByte FLASH is know to work and other
20276 configurations should work too.
20278 Signed-off-by: Stefan Roese <sr@denx.de>
20280 commit 82e5236a8b719543643fd26d5827938ab2b94818
20281 Author: Wolfgang Denk <wd@pollux.denx.de>
20282 Date: Fri Dec 22 10:30:26 2006 +0100
20284 Minor code cleanup; update CHANGELOG.
20286 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
20287 Author: Heiko Schocher <hs@pollux.denx.de>
20288 Date: Thu Dec 21 17:17:02 2006 +0100
20290 Added support for the TQM8272 board from TQ
20292 Signed-off-by: Heiko Schocher <hs@denx.de>
20294 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
20295 Author: Heiko Schocher <hs@pollux.denx.de>
20296 Date: Thu Dec 21 16:14:48 2006 +0100
20298 [PATCH] Add support for the UC101 board from MAN.
20300 Signed-off-by: Heiko Schocher <hs@denx.de>
20302 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
20303 Author: Bartlomiej Sieka <tur@semihalf.com>
20304 Date: Wed Dec 20 00:29:43 2006 +0100
20306 Fix to make the baudrate changes immediate for the MCF52x2 family.
20308 commit daa6e418bcc0c717752e8de939c213c790286096
20309 Author: Bartlomiej Sieka <tur@semihalf.com>
20310 Date: Wed Dec 20 00:27:32 2006 +0100
20312 Preliminary support for the iDMR board (ColdFire).
20314 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
20315 Author: Andrei Safronov <safronov@pollux.denx.de>
20316 Date: Fri Dec 8 16:23:08 2006 +0100
20318 automatic update mechanism
20320 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
20321 Author: roy zang <tie-fei.zang@freescale.com>
20322 Date: Mon Dec 4 17:56:59 2006 +0800
20324 Slight code clean up.
20325 Add comments, delete duplicate define and remove spaces.
20326 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20328 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
20329 Author: roy zang <tie-fei.zang@freescale.com>
20330 Date: Mon Dec 4 17:54:21 2006 +0800
20332 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
20333 multiplier table can not refect the real PLL clock behavior of these
20334 processors. Please refer to the hardware specification for detailed
20335 information of the corresponding processors.
20336 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20338 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
20339 Author: roy zang <tie-fei.zang@freescale.com>
20340 Date: Mon Dec 4 14:46:23 2006 +0800
20342 Remove the static MAC address, ip address, server ip, netmask and
20343 gateway ip for network setting.
20344 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20346 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
20347 Author: roy zang <tie-fei.zang@freescale.com>
20348 Date: Mon Dec 4 14:33:08 2006 +0800
20350 Remove the duplicate memory test code for mpc744ihpc2 board.
20351 If a memory test is needed, please use the functions in
20352 post/memory.c or memtest command.
20353 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20355 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
20356 Author: roy zang <tie-fei.zang@freescale.com>
20357 Date: Fri Dec 1 19:01:25 2006 +0800
20359 Fix the exception occuring in RAM table search issue.
20360 The original search_one_table() function code can only processes the search
20361 for the exception occurring in FLASH/ROM, because the exception and fixup
20362 table usually locate in FLASH. If the exception address is also in
20363 FLASH, it will be OK.
20364 If the exception occurs in RAM, after the u-boot relocation, a
20365 relocation offset should be added.
20367 clean up the code in cpu/74xx_7xx/cpu.c
20369 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20371 commit ee311214e0d216f904feea269599d0934bf71f23
20372 Author: roy zang <tie-fei.zang@freescale.com>
20373 Date: Fri Dec 1 11:47:36 2006 +0800
20375 Clean up the code according to codestyle:
20376 (1) remove some C++ comments.
20377 (2) remove trailing white space.
20378 (3) remove trailing empty line.
20379 (4) Indentation by table.
20380 (5) remove {} in one line condition.
20381 (6) add space before '(' in function call.
20382 Remove some weird printf () output.
20383 Add necessary comments.
20384 Modified Makefile to support building in a separate directory.
20386 commit dd520bf314c7add4183c5191692180f576f96b60
20387 Author: Wolfgang Denk <wd@pollux.denx.de>
20388 Date: Thu Nov 30 18:02:20 2006 +0100
20392 commit 8d9a8610b8256331132227e9e6585c6bd5742787
20393 Author: Wolfgang Denk <wd@pollux.denx.de>
20394 Date: Thu Nov 30 01:54:07 2006 +0100
20396 Code cleanup. Update CHANGELOG.
20398 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
20399 Author: Grant Likely <grant.likely@secretlab.ca>
20400 Date: Wed Nov 29 16:23:42 2006 +0100
20402 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
20404 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
20405 not the XLB frequency.
20407 This patch depends on the previous patches for MPC52xx device tree support
20409 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20410 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
20412 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
20413 Author: Stefan Roese <sr@denx.de>
20414 Date: Wed Nov 29 15:42:37 2006 +0100
20416 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
20418 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
20419 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
20420 quite similar and share the same board directory "prodrive/p3mx"
20421 and the same config file "p3mx.h".
20423 Signed-off-by: Stefan Roese <sr@denx.de>
20425 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
20426 Author: Stefan Roese <sr@denx.de>
20427 Date: Wed Nov 29 12:53:15 2006 +0100
20429 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
20431 In the bootvx command the load address was only read from the env
20432 variable "loadaddr" and not optionally passed as paramter as described
20433 in the help. This is fixed with this patch. The behaviour is now the
20434 same as in the bootelf command.
20436 Signed-off-by: Stefan Roese <sr@denx.de>
20438 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
20439 Author: Stefan Roese <sr@denx.de>
20440 Date: Wed Nov 29 12:03:57 2006 +0100
20442 [PATCH] include/ppc440.h minor error affecting interrupts
20444 Fixed include/ppc440.c for UIC address Bug
20446 Corrects bug affecting the addresses for the universal interrupt
20447 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
20449 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
20450 Signed-off-by: Stefan Roese <sr@denx.de>
20452 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
20453 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
20454 Date: Tue Nov 28 16:17:27 2006 -0600
20456 Make fsl-i2c not conflict with SOFT I2C
20458 Signed-off-by: Timur Tabi <timur@freescale.com>
20460 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
20461 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
20462 Date: Tue Nov 28 16:17:18 2006 -0600
20464 Fix I2C master address initialization.
20466 Signed-off-by: Timur Tabi <timur@freescale.com>
20468 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
20469 Author: Kim Phillips <kim.phillips@freescale.com>
20470 Date: Tue Nov 28 23:31:19 2006 -0600
20472 Assign maintainers for mpc8349emds and mpc8360emds
20474 Dave for mpc8360emds, and me for mpc8349emds.
20476 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
20477 Author: Kim Phillips <kim.phillips@freescale.com>
20478 Date: Tue Nov 28 23:28:33 2006 -0600
20480 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
20482 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
20483 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
20485 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
20486 Author: Timur Tabi <timur@freescale.com>
20487 Date: Tue Nov 28 12:09:35 2006 -0600
20489 mpc83xx: Miscellaneous code style fixes
20491 Implement various code style fixes and similar changes.
20493 Signed-off-by: Timur Tabi <timur@freescale.com>
20495 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
20496 Author: Stefan Roese <sr@denx.de>
20497 Date: Tue Nov 28 17:55:49 2006 +0100
20499 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
20501 This patch adds the code and configuration necessary to boot with an
20502 arch/powerpc Linux kernel.
20504 Signed-off-by: Grant Likely <grant.likely@gmail.com>
20505 Acked-by: Jon Loeliger <jdl@freescale.com>
20507 commit e732faec95a83cb468b4850ae807c8301dde8f6a
20508 Author: Stefan Roese <sr@denx.de>
20509 Date: Tue Nov 28 16:09:24 2006 +0100
20511 [PATCH] PPC4xx: 440SP Rev. C detection added
20513 Signed-off-by: Stefan Roese <sr@denx.de>
20515 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
20516 Author: Stefan Roese <sr@denx.de>
20517 Date: Tue Nov 28 11:04:45 2006 +0100
20519 [PATCH] nand: Fix patch merge problem
20521 Signed-off-by: Stefan Roese <sr@denx.de>
20523 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
20524 Author: Stefan Roese <sr@denx.de>
20525 Date: Tue Nov 28 11:04:45 2006 +0100
20527 [PATCH] nand: Fix patch merge problem
20529 Signed-off-by: Stefan Roese <sr@denx.de>
20531 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
20532 Author: Wolfgang Denk <wd@pollux.denx.de>
20533 Date: Mon Nov 27 22:53:53 2006 +0100
20537 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
20538 Author: Stefan Roese <sr@denx.de>
20539 Date: Mon Nov 27 17:43:25 2006 +0100
20541 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
20543 Patch below corrects the setting of the zmiifer register, it was
20544 overwritting the register rather than ORing the settings.
20546 Signed-off-by: Neil Wilson <NWilson@airspan.com>
20547 Signed-off-by: Stefan Roese <sr@denx.de>
20549 commit d1a72545296800b7e219f93104ad5836f0003d66
20550 Author: Stefan Roese <sr@denx.de>
20551 Date: Mon Nov 27 17:34:10 2006 +0100
20553 [PATCH] Select NAND embedded environment from board configuration
20555 The current NAND Bootloader setup forces the environment
20556 variables to be in line with the bootloader. This change
20557 enables the configuration to be made in the board include
20558 file instead so that it can be individually enabled.
20560 Signed-off-by: Nick Spence <nick.spence@freescale.com>
20561 Signed-off-by: Stefan Roese <sr@denx.de>
20563 commit 15784862857c3c2214498defcfed84ff137fb81e
20564 Author: Stefan Roese <sr@denx.de>
20565 Date: Mon Nov 27 17:22:19 2006 +0100
20567 [PATCH] nand_wait() timeout fixes
20569 Two fixes for the nand_wait() function in
20570 drivers/nand/nand_base.c:
20572 1. Use correct timeouts. The original timeouts in Linux
20573 source are 400ms and 20ms not 40s and 20s
20575 2. Return correct error value in case of timeout. 0 is
20578 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
20579 Signed-off-by: Stefan Roese <sr@denx.de>
20581 commit da5553b095bf04f4f109ad7e565dae3aba47b230
20582 Author: Stefan Roese <sr@denx.de>
20583 Date: Mon Nov 27 17:04:06 2006 +0100
20585 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
20587 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
20588 arguments to bootm. It removes the getenv("disable_of") test that used
20589 to be used for this purpose.
20591 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20592 Acked-by: Jon Loeliger <jdl@freescale.com>
20594 commit a9398e018593782c5fa7d0741955fc1256b34c1e
20595 Author: Wolfgang Denk <wd@pollux.denx.de>
20596 Date: Mon Nov 27 15:32:42 2006 +0100
20598 Minor code cleanup. Update CHANGELOG.
20600 commit 1729b92cde575476684bffe819d0b7791b57bff2
20601 Author: Stefan Roese <sr@denx.de>
20602 Date: Mon Nov 27 14:52:04 2006 +0100
20604 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
20606 Signed-off-by: Stefan Roese <sr@denx.de>
20608 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
20609 Author: Stefan Roese <sr@denx.de>
20610 Date: Mon Nov 27 14:49:51 2006 +0100
20612 [PATCH] alpr: remove unused board specific flash driver
20614 Signed-off-by: Stefan Roese <sr@denx.de>
20616 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
20617 Author: Stefan Roese <sr@denx.de>
20618 Date: Mon Nov 27 14:48:41 2006 +0100
20620 [PATCH] 4xx: Fix problem with board specific reset code
20622 Signed-off-by: Stefan Roese <sr@denx.de>
20624 commit ec0c2ec725aec9524a177a77ce75559e644a931a
20625 Author: Stefan Roese <sr@denx.de>
20626 Date: Mon Nov 27 14:46:06 2006 +0100
20628 [PATCH] Remove testing 4xx enet PHY setup
20630 Signed-off-by: Stefan Roese <sr@denx.de>
20632 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
20633 Author: Stefan Roese <sr@denx.de>
20634 Date: Mon Nov 27 14:12:17 2006 +0100
20636 [PATCH] Update Prodrive ALPR board support (440GX)
20638 Signed-off-by: Stefan Roese <sr@denx.de>
20640 commit 58b485776698c3d71ec5a215e392123b4c15afa3
20641 Author: Markus Klotzbuecher <mk@denx.de>
20642 Date: Mon Nov 27 11:51:21 2006 +0100
20644 Add a small README with information on the generic ohci driver.
20646 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
20647 Author: Markus Klotzbuecher <mk@denx.de>
20648 Date: Mon Nov 27 11:46:46 2006 +0100
20650 Fix some endianness issues related to the generic ohci driver
20652 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
20653 Author: Markus Klotzbuecher <mk@denx.de>
20654 Date: Mon Nov 27 11:44:58 2006 +0100
20656 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
20657 to choose between the old and the generic OHCI drivers.
20659 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
20660 Author: Markus Klotzbuecher <mk@denx.de>
20661 Date: Mon Nov 27 11:43:09 2006 +0100
20663 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
20664 and adapted board configs TQM5200 and yosemite accordingly. This commit
20665 also makes the maximum number of root hub ports configurable
20666 (CFG_USB_OHCI_MAX_ROOT_PORTS).
20668 commit 78d620ebb5871d252270dedfad60c6568993b780
20669 Author: Wolfgang Denk <wd@atlas.denx.de>
20670 Date: Thu Nov 23 22:58:58 2006 +0100
20672 Updates for TQM5200 modules:
20673 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
20674 - simplify "udate" definitions
20676 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
20677 Author: Stefan Roese <sr@denx.de>
20678 Date: Wed Nov 22 13:20:50 2006 +0100
20680 [PATCH] PPC4xx start.S: Fix for processor errata
20682 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
20683 errata 1.12: 440_33 by moving patch up in code.
20685 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
20686 Signed-off-by: Stefan Roese <sr@denx.de>
20688 commit 4ef6251403f637841000e0fef9e832aa01339822
20689 Author: Stefan Roese <sr@denx.de>
20690 Date: Mon Nov 20 20:39:52 2006 +0100
20692 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
20694 Signed-off-by: Stefan Roese <sr@denx.de>
20696 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
20697 Author: Wolfgang Denk <wd@pollux.denx.de>
20698 Date: Mon Nov 20 10:28:30 2006 +0100
20702 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
20703 Author: Stefan Roese <sr@denx.de>
20704 Date: Mon Nov 13 13:55:24 2006 +0100
20706 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
20708 * Adds support for AMD command set Top Boot flash geometry reversal
20709 * Adds support for reading JEDEC Manufacturer ID and Device ID
20710 * Adds support for displaying command set, manufacturer id and
20711 device ids (flinfo)
20712 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
20713 * Removes outdated change history (refer to git log instead)
20715 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
20716 Signed-off-by: Stefan Roese <sr@denx.de>
20718 commit b21b511d4c50408f4853f46f06b601272196223f
20719 Author: Wolfgang Denk <wd@pollux.denx.de>
20720 Date: Sun Nov 12 21:13:23 2006 +0100
20724 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
20725 Author: Bartlomiej Sieka <tur@semihalf.com>
20726 Date: Sat Nov 11 22:48:22 2006 +0100
20728 Disable the watchdog in the default config for the V38B board.
20730 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
20731 Author: Bartlomiej Sieka <tur@semihalf.com>
20732 Date: Sat Nov 11 22:43:00 2006 +0100
20734 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
20735 group is enabled for USB earlier (in cpu_init_f() instead of
20736 usb_lowlevel_init()).
20738 commit 91650b3e4de688038d4f71279c44858e3e2c6870
20739 Author: Wolfgang Denk <wd@pollux.denx.de>
20740 Date: Mon Nov 6 17:06:36 2006 +0100
20742 Sequential accesses to non-existent memory must be synchronized,
20743 at least on G2 cores.
20745 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
20747 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
20748 Author: Timur Tabi <timur@freescale.com>
20749 Date: Fri Nov 3 19:15:00 2006 -0600
20751 mpc83xx: Update 83xx to use fsl_i2c.c
20753 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
20754 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
20755 Added multiple I2C bus support to fsl_i2c.c.
20757 Signed-off-by: Timur Tabi <timur@freescale.com>
20759 commit d239d74b1c937984bc519083a8e7de373a390f06
20760 Author: Timur Tabi <timur@freescale.com>
20761 Date: Fri Nov 3 12:00:28 2006 -0600
20763 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
20765 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
20766 tree matches the other 8xxx trees.
20768 Signed-off-by: Timur Tabi <timur@freescale.com>
20770 commit f7fb2e703ec9688541416962724adff70a7322cb
20771 Author: Kim Phillips <kim.phillips@freescale.com>
20772 Date: Thu Nov 2 19:47:11 2006 -0600
20774 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
20776 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
20777 Author: Dave Liu <daveliu@freescale.com>
20778 Date: Thu Nov 2 18:05:50 2006 -0600
20780 mpc83xx: Fix the incorrect dcbz operation
20782 The 834x rev1.x silicon has one CPU5 errata.
20784 The issue is when the data cache locked with
20785 HID0[DLOCK], the dcbz instruction looks like no-op inst.
20787 The right behavior of the data cache is when the data cache
20788 Locked with HID0[DLOCK], the dcbz instruction allocates
20791 The 834x rev3.0 and later and 8360 have not this bug inside.
20793 So, when 834x rev3.0/8360 are working with ECC, the dcbz
20794 instruction will corrupt the stack in cache, the processor will
20797 However, the 834x rev1.x can work with ECC with these code,
20798 because the sillicon has this cache bug. The dcbz will not
20799 corrupt the stack in cache.
20800 Really, it is the fault code running on fault sillicon.
20802 This patch fix the incorrect dcbz operation. Instead of
20803 CPU FP writing to initialise the ECC.
20806 * Fix the incorrect dcbz operation instead of CPU FP
20807 writing to initialise the ECC memory. Otherwise, it
20808 will corrupt the stack in cache, The processor will checkstop
20811 Signed-off-by: Dave Liu <daveliu@freescale.com>
20813 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
20814 Author: Kim Phillips <kim.phillips@freescale.com>
20815 Date: Wed Nov 1 00:10:40 2006 -0600
20817 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
20819 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
20820 STDOUT_PATH configuration bits to mpc8349emds,
20821 mpc8349itx, and mpc8360emds board code.
20823 redo environment to use bootm with the fdtaddr
20824 for booting ARCH=powerpc kernels by default,
20825 and provide default fdtaddr values.
20827 commit 48041365b3420589ad464ebc7752e0053538b729
20828 Author: Kim Phillips <kim.phillips@freescale.com>
20829 Date: Wed Nov 1 00:07:25 2006 -0600
20831 mpc83xx: change ft code to modify local-mac-address property
20833 Update 83xx OF code to update local-mac-address properties
20834 for ethernet instead of the obsolete 'address' property.
20836 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
20837 Author: Timur Tabi <timur@freescale.com>
20838 Date: Tue Oct 31 21:23:16 2006 -0600
20840 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
20842 This patch also adds an improved I2C set_speed(), which handles all clock
20845 Signed-off-by: Timur Tabi <timur@freescale.com>
20847 commit ac4b5622ce050b5ee1e154b98df630d778661632
20848 Author: Dave Liu <daveliu@freescale.com>
20849 Date: Tue Oct 31 19:54:59 2006 -0600
20851 mpc83xx: add the README.mpc8360emds
20853 add doc/README.mpc8360emds to accompany the new board support
20855 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
20856 Author: Dave Liu <daveliu@freescale.com>
20857 Date: Fri Nov 3 12:11:15 2006 -0600
20859 mpc83xx: add QE ethernet support
20861 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
20863 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
20864 Author: Dave Liu <daveliu@freescale.com>
20865 Date: Fri Nov 3 19:33:44 2006 -0600
20867 mpc83xx: Add MPC8360EMDS basic board support
20869 Add support for the Freescale MPC8360EMDS board.
20870 Includes DDR, DUART, Local Bus, PCI.
20872 commit 23892e49352de74f7fac36ff90bb1be143d195e3
20873 Author: Dave Liu <daveliu@freescale.com>
20874 Date: Tue Oct 31 19:30:40 2006 -0600
20876 mpc83xx: add the QUICC Engine (QE) immap file
20878 common QE immap file. Also required for 8360.
20880 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
20881 Author: Dave Liu <daveliu@freescale.com>
20882 Date: Tue Oct 31 19:25:38 2006 -0600
20884 mpc83xx: Add 8360 specifics to 83xx immap
20886 Mainly add QE device dependencies, with appropriate 8360 protection.
20889 commit 988833324a7fda482c8ac3ca23eb539f8232e404
20890 Author: Timur Tabi <timur@freescale.com>
20891 Date: Tue Oct 31 19:14:41 2006 -0600
20893 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
20895 PREREQUISITE PATCHES:
20897 * This patch can only be applied after the following patches have been applied:
20899 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
20900 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
20904 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
20905 the clock for the 2nd USB board (Linux kernel will hang otherwise),
20906 and fix the CONFIG_BOOTARGS macro.
20908 Signed-off-by: Timur Tabi <timur@freescale.com>
20910 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
20911 Author: Timur Tabi <timur@freescale.com>
20912 Date: Tue Oct 31 18:44:42 2006 -0600
20914 mpc83xx: Add support for the MPC8349E-mITX
20916 PREREQUISITE PATCHES:
20918 * This patch can only be applied after the following patches have been applied:
20920 1) DNX#2006090742000024 "Add support for multiple I2C buses"
20921 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
20922 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
20923 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
20924 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
20928 * Add support for the Freescale MPC8349E-mITX reference design platform.
20929 The second TSEC (Vitesse 7385 switch) is not supported at this time.
20931 Signed-off-by: Timur Tabi <timur@freescale.com>
20933 commit 183da6d9b446cc12123455844ad1187e2375626f
20934 Author: Ben Warren <bwarren@qstreams.com>
20935 Date: Tue Sep 12 10:15:53 2006 -0400
20937 Additional MPC8349 support for multibus i2c
20941 Here is a patch for a file that was accidentally left out of a previous
20944 It accompanies the patch with ticket DNX#2006090742000024
20947 Change PCI initialization to use new multi-bus I2C API.
20952 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
20953 Author: Ben Warren <bwarren@qstreams.com>
20954 Date: Thu Sep 7 16:51:04 2006 -0400
20956 Multi-bus I2C implementation of MPC834x
20960 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
20961 family and the MPC8349EMDS board in particular.
20962 This patch requires Patch 1 (Add support for multiple I2C buses).
20963 Testing was performed on a 533MHz board.
20965 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
20967 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20970 Implemented driver-level code to support two I2C buses on the
20971 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
20972 are 50kHz, 100kHz and 400kHz on each bus.
20977 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
20978 Author: Ben Warren <bwarren@qstreams.com>
20979 Date: Thu Sep 7 16:50:54 2006 -0400
20981 Add support for multiple I2C buses
20985 Attached is a patch providing support for multiple I2C buses at the
20986 command level. The second part of the patch includes an implementation
20987 for the MPC834x CPU and MPC8349EMDS board.
20989 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
20991 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20995 1. Include new 'i2c' command (based on USB implementation) using
20996 CONFIG_I2C_CMD_TREE.
20998 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
20999 the commands to change bus number and speed are only available under the
21000 new 'i2c' command mentioned in the first bullet.
21002 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
21003 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
21004 of an array of bus-device pairs. Otherwise, it is an array of uchar.
21007 Added new 'i2c' master command for all I2C interaction. This is
21008 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
21009 setting I2C bus speed as well as changing the active bus if the board
21010 has more than one (conditionally compiled with
21011 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
21017 commit bed85caf872714ebf53013967a695c9d63acfc68
21018 Author: Timur Tabi <timur@freescale.com>
21019 Date: Tue Oct 31 18:13:36 2006 -0600
21021 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
21025 * Errata DDR6, which affects all current MPC 834x processors, lists changes
21026 required to maintain compatibility with various types of DDR memory. This
21027 patch implements those changes.
21029 Signed-off-by: Timur Tabi <timur@freescale.com>
21031 commit afd6e470f639883002c7c59d562690a5cb0f4865
21032 Author: Timur Tabi <timur@freescale.com>
21033 Date: Wed Oct 25 18:45:23 2006 -0500
21035 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
21037 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
21038 Author: Timur Tabi <timur@freescale.com>
21039 Date: Tue Aug 22 17:07:00 2006 -0500
21041 mpc83xx: Add support for variable flash memory sizes on 83xx systems
21045 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
21046 window registers, instead of using a hard-coded value of 8MB.
21048 Signed-off-by: Timur Tabi <timur@freescale.com>
21050 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
21051 Author: Tanya Jiang <tanya.jiang@freescale.com>
21052 Date: Thu Aug 3 18:38:13 2006 +0800
21054 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
21056 Unified TQM834x variable names with 83xx and consolidated macro
21057 in preparation for the 8360 and other upcoming 83xx devices.
21059 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
21061 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
21062 Author: Dave Liu <daveliu@freescale.com>
21063 Date: Wed Oct 25 14:41:21 2006 -0500
21065 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
21067 Incorporated the common unified variable names and the changes in preparation
21068 for releasing mpc8360 patches.
21070 Signed-off-by: Dave Liu <daveliu@freescale.com>
21072 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
21073 Author: Tanya Jiang <tanya.jiang@freescale.com>
21074 Date: Thu Aug 3 18:36:02 2006 +0800
21076 mpc83xx: Fix missing build for mpc8349emds pci.c
21078 Make pci build for mpc8349emds
21080 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
21082 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
21083 Author: Tanya Jiang <tanya.jiang@freescale.com>
21084 Date: Thu Aug 3 18:39:49 2006 +0800
21086 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
21088 Removed unused file resetvec.S for mpc83xx cpu
21090 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
21092 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
21093 Author: Nick Spence <Nick.Spence@freescale.com>
21094 Date: Sat Sep 30 00:32:59 2006 -0700
21096 NAND Flash verify across block boundaries
21098 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
21100 and the write crosses a block boundary. The pointer to the verification
21101 buffer (bufstart) is not being updated to reflect the starting of the
21103 block so the verification of the second block fails.
21107 * Fix NAND FLASH page verification across block boundaries
21109 commit f484dc791a3932537213c43c654cc1295c64b84c
21110 Author: Nick Spence <nick.spence@freescale.com>
21111 Date: Thu Sep 7 07:39:46 2006 -0700
21113 Added RGMII support to the TSECs and Marvell 881111 Phy
21115 Added a phy initialization to adjust the RGMII RX and TX timing
21116 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
21118 Signed-off-by: Nick Spence <nick.spence@freescale.com>
21120 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
21121 Author: roy zang <tie-fei.zang@freescale.com>
21122 Date: Fri Nov 3 13:10:00 2006 +0800
21124 Remove some unused CFG define.
21125 undef CFG_DRAM_TEST
21127 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
21128 Author: roy zang <tie-fei.zang@freescale.com>
21129 Date: Fri Nov 3 13:07:36 2006 +0800
21131 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
21132 Both work. 0xFF000000 seems more reasonable.
21134 commit c59200443072353044aa4bf737a5a60f9a9af231
21135 Author: Wolfgang Denk <wd@pollux.denx.de>
21136 Date: Thu Nov 2 15:15:01 2006 +0100
21138 Release U-Boot 1.1.6
21140 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
21141 Author: roy zang <tie-fei.zang@freescale.com>
21142 Date: Thu Nov 2 19:14:48 2006 +0800
21144 This patch comes from Yuli's posted patch on 8/8/2006
21145 titled "CFI Driver Little-Endian write Issue".
21147 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
21149 If that patch applied, please discard this one.
21150 Until now , I do not see his patch is applied. So please apply this one.
21152 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
21153 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21155 commit b825f158e449e1e9cf74c08e572955e122394c96
21156 Author: roy zang <tie-fei.zang@freescale.com>
21157 Date: Thu Nov 2 19:12:31 2006 +0800
21159 Tsi108 on chip i2c support.
21161 The i2c Interface provides a master-only, serial interface that can be
21162 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
21165 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21166 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21168 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
21169 Author: roy zang <tie-fei.zang@freescale.com>
21170 Date: Thu Nov 2 19:11:06 2006 +0800
21172 Tsi108 on chip pci controller support.
21174 If there is no pci card, the tsi108/109 pci configure read will
21175 cause a machine check exception to the processor. PCI error should
21176 also be cleared after the read.
21178 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21179 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21181 commit d1927cee977126e547ceeba23e4f978f377cfb8f
21182 Author: roy zang <tie-fei.zang@freescale.com>
21183 Date: Thu Nov 2 19:08:55 2006 +0800
21185 Tundra tsi108 on chip Ethernet controller support.
21187 The following is a brief description of the Ethernet controller:
21188 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
21189 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
21190 to manage the two physical connection devices (PHYs). Each Ethernet port
21191 has its own statistics monitor that tracks and reports key interface
21192 statistics. Each port supports a 256-entry hash table for address
21193 filtering. In addition, each port is bridged to the Switch Fabric
21194 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
21196 Each Ethernet port also has a pair of internal Ethernet DMA channels to
21197 support the transmit and receive data flows. The Ethernet DMA channels
21198 use descriptors set up in memory, the memory map of the device, and
21199 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
21200 handles arbitration for the Switch Fabric. The Controller also
21201 has a register businterface for register accesses and status monitor
21204 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
21205 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
21206 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
21207 data flows to and from the Ethernet Controller through the Switch Fabric.
21209 Each Ethernet port uses its transmit and receive DMA channels to manage
21210 data flows through buffer descriptors that are predefined by the
21211 system (the descriptors can exist anywhere in the system memory map).
21212 These descriptors are data structures that point to buffers filled
21213 with data ready to transmit over Ethernet, or they point to empty
21214 buffers ready to receive data from Ethernet.
21216 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21217 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21219 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
21220 Author: roy zang <tie-fei.zang@freescale.com>
21221 Date: Thu Nov 2 19:01:33 2006 +0800
21223 Tundra tsi108 header file.
21225 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
21226 PowerPC processors that offers numerous system interconnect options for
21227 embedded application designers. The Tsi108 can interconnect 60x or
21228 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
21229 and Flash. Provided the macro define for tsi108 chip.
21231 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21232 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21234 commit 87c4db09699c6b89176b31004afcb83eb1585d47
21235 Author: roy zang <tie-fei.zang@freescale.com>
21236 Date: Thu Nov 2 18:59:15 2006 +0800
21238 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21239 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
21241 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21242 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21244 commit 27801b8ab11c61b577e45742a515bb3b23b80241
21245 Author: roy zang <tie-fei.zang@freescale.com>
21246 Date: Thu Nov 2 18:57:21 2006 +0800
21248 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21249 Make ,config.mk and link file for the mpc7448hpc2 board.
21251 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21252 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21254 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
21255 Author: roy zang <tie-fei.zang@freescale.com>
21256 Date: Thu Nov 2 18:55:04 2006 +0800
21258 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21259 The mpc7448hpc2 board support header file.
21261 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21262 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21264 commit 625bb5ddb50b243f931262ca8c46956409471917
21265 Author: roy zang <tie-fei.zang@freescale.com>
21266 Date: Thu Nov 2 18:52:21 2006 +0800
21268 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
21269 The mpc7448hpc2 board support low level assemble language init code.
21271 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21272 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21274 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
21275 Author: roy zang <tie-fei.zang@freescale.com>
21276 Date: Thu Nov 2 18:49:51 2006 +0800
21278 General code modification for mpc7448hpc2 board support.
21279 1. Add 7447A and 7448 processor support.
21280 2. Add the following flags.
21282 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
21283 (such as by switch on board), this flag should be set.
21285 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
21286 relocates to RAM, this flag should be set.
21288 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
21289 system hang in exception, this flag should be set.
21291 There is a design issue for tsi108/109 pci configure read. When pci scan
21292 the slots, if there is no pci card, the tsi108/9 will cause a machine
21293 check exception for mpc7448 processor.
21295 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
21296 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21298 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
21299 Author: roy zang <tie-fei.zang@freescale.com>
21300 Date: Thu Nov 2 18:34:47 2006 +0800
21302 Add README file for mpc7448hpc2 board.
21303 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21305 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
21306 Author: Bartlomiej Sieka <tur@semihalf.com>
21307 Date: Wed Nov 1 02:04:38 2006 +0100
21309 Finish up support for MarelV38B board
21310 - add watchdog support
21311 - enable GPIO_WKUP_7 pin for input
21314 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
21315 Author: Bartlomiej Sieka <tur@semihalf.com>
21316 Date: Wed Nov 1 01:45:46 2006 +0100
21318 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
21319 * remove warnings when compiling ethaddr.c
21320 * adjust linker script (fixes a crash resulting from incorrect
21321 definition of __u_boot_cmd_start)
21322 - Some MarelV38B code cleanup.
21324 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
21325 Author: Bartlomiej Sieka <tur@semihalf.com>
21326 Date: Wed Nov 1 01:38:16 2006 +0100
21328 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
21329 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
21330 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
21331 MPC5XXX_WU_GPIO_DATA_O for affected boards.
21333 - Add defintions for some MPC5XXX GPIO pins.
21335 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
21336 Author: Bartlomiej Sieka <tur@semihalf.com>
21337 Date: Wed Nov 1 01:34:29 2006 +0100
21339 Changed MarelV38B board make target to lowercase. Config file cleanup.
21341 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
21342 Author: Wolfgang Denk <wd@pollux.denx.de>
21343 Date: Sun Oct 29 01:03:51 2006 +0200
21345 Automatically adjust ARFLAGS so "make -s" is really silent.
21347 commit fae684e89844856383bdf101440889557df3e6b1
21348 Author: Stefan Roese <sr@denx.de>
21349 Date: Sat Oct 28 16:45:00 2006 +0200
21351 [PATCH] omap925.c: Remove unused functions
21353 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21354 Signed-off-by: Stefan Roese <sr@denx.de>
21356 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
21357 Author: Stefan Roese <sr@denx.de>
21358 Date: Sat Oct 28 17:12:58 2006 +0200
21360 [PATCH] Add some missing machtypes for netstar & voiceblue boards
21362 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
21365 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21366 Signed-off-by: Stefan Roese <sr@denx.de>
21368 commit 856f054410cef52d868feb330168b2a4c4091328
21369 Author: Stefan Roese <sr@denx.de>
21370 Date: Sat Oct 28 15:55:52 2006 +0200
21372 [PATCH] NAND: Partition name support added to NAND subsystem
21374 chpart, nboot and NAND subsystem related commands now accept also partition
21375 name to specify offset.
21377 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21378 Signed-off-by: Stefan Roese <sr@denx.de>
21380 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
21381 Author: Wolfgang Denk <wd@pollux.denx.de>
21382 Date: Sat Oct 28 02:29:44 2006 +0200
21386 commit 2751a95abd1b96911081c357e96a12fa97b40dee
21387 Author: Wolfgang Denk <wd@pollux.denx.de>
21388 Date: Sat Oct 28 02:29:14 2006 +0200
21390 Enable commandline editing and hush shell on all TQM boards.
21392 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
21393 Author: Wolfgang Denk <wd@pollux.denx.de>
21394 Date: Sat Oct 28 02:28:02 2006 +0200
21396 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
21398 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
21399 Author: Wolfgang Denk <wd@denx.de>
21400 Date: Sat Oct 28 01:14:32 2006 +0200
21402 Check for illegal character '=' in environment variable names.
21404 Make sure the string passed as variable name does not contain a '='
21405 character. This not only prevents the common error or typing
21406 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
21407 also closes a backdoor which allowed to delete write-protected
21408 environment variables, for example by using "setenv ethaddr=".
21410 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
21411 Author: Wolfgang Denk <wd@pollux.denx.de>
21412 Date: Sat Oct 28 00:38:39 2006 +0200
21414 Minor code cleanup.
21416 commit e11887a77d81077416a2d1c5e0354916fee8c034
21417 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21418 Date: Thu Oct 26 17:55:31 2006 +0200
21420 Don't pass any debug options directly to the assembler
21422 When passing the -g option to gcc, gcc automatically selects a
21423 suitable --g<format> option to pass on to the assembler.
21424 Thus, there's no point in forcing a specific debug option on the
21425 assembler using the -Wa mechanism.
21427 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21429 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
21430 Author: Jon Loeliger <jdl@freescale.com>
21431 Date: Fri Oct 27 07:47:22 2006 -0500
21433 MPC86xx: Cleaned up unused and conditionally used local variables.
21435 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21437 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
21438 Author: Wolfgang Denk <wd@pollux.denx.de>
21439 Date: Fri Oct 27 11:55:21 2006 +0200
21441 Fix "ar" flags in some Makefiles to allow for silent "make -s"
21443 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
21444 Author: Ben Warren <bwarren@qstreams.com>
21445 Date: Thu Oct 26 14:38:25 2006 -0400
21447 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
21448 to a TSEC (e.g. a switch is connected via RMII) or
21449 if the PHY is defective/incorrectly configured.
21451 Signed-off-by: Ben Warren <bwarren@qstreams.com>
21453 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
21454 Author: Ben Warren <bwarren@qstreams.com>
21455 Date: Thu Oct 26 14:38:25 2006 -0400
21457 Fix TSEC driver: avoid crashes if PHY is not attached
21458 to a TSEC (e.g. a switch is connected via RMII) or
21459 if the PHY is defective/incorrectly configured.
21461 Signed-off-by: Ben Warren <bwarren@qstreams.com>
21463 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
21464 Author: Wolfgang Denk <wd@pollux.denx.de>
21465 Date: Thu Oct 26 16:24:31 2006 +0200
21469 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
21470 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21471 Date: Wed Oct 25 15:48:59 2006 +0200
21473 Finish up support for the ATSTK1000/ATSTK1002 boards
21475 Add atstk1002_config target to Makefile and move the AVR32 section
21476 down below Blackfin so that it doesn't end up in the middle of
21479 Drop the autogenerated linker script thing for now. Will have to
21480 revisit how to handle chips with different flash and RAM layout
21483 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21485 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
21486 Author: Kumar Gala <galak@kernel.crashing.org>
21487 Date: Tue Oct 24 23:47:37 2006 -0500
21489 Added support for Multi-Image files that contain a device tree
21491 If a Multi-Image file contains a third image we try to use it as a
21492 device tree. The device tree image is assumed to be uncompressed in the
21493 image file. We automatically allocate space for the device tree in memory
21494 and provide an 8k pad to allow more than a reasonable amount of growth.
21496 Additionally, a device tree that was contained in flash will now automatically
21497 get copied to system memory as part of boot. Previously an error was
21498 reported if one tried to boot a device tree that was in flash.
21500 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21502 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
21503 Author: Wolfgang Denk <wd@denx.de>
21504 Date: Tue Oct 24 21:35:55 2006 +0200
21506 Switch to automatically generated CHANGELOG file.
21507 (use "make CHANGELOG" to update it from time to time)
21509 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
21510 Author: Stefan Roese <sr@denx.de>
21511 Date: Tue Oct 24 18:06:48 2006 +0200
21513 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
21514 Patch by Stefan Roese, 24 Oct 2006
21516 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
21517 Author: Wolfgang Denk <wd@pollux.denx.de>
21518 Date: Tue Oct 24 17:24:55 2006 +0200
21520 Merge with /home/wd/git/u-boot/master
21522 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
21523 Author: Wolfgang Denk <wd@pollux.denx.de>
21524 Date: Tue Oct 24 15:32:57 2006 +0200
21528 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
21529 Author: Wolfgang Denk <wd@pollux.denx.de>
21530 Date: Tue Oct 24 14:51:36 2006 +0200
21532 Move atstk1000 files into vendor specific directory.
21533 Patch by Haavard Skinnemoen, 12 Sep 2006
21535 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
21536 Author: Wolfgang Denk <wd@pollux.denx.de>
21537 Date: Tue Oct 24 14:42:37 2006 +0200
21539 Add ATSTK1000 and ATSTK1002 board support
21540 Patch by Haavard Skinnemoen, 06 Sep 2006
21542 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
21545 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
21546 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
21547 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
21548 CompactFlash cards. For more information, please see this page:
21550 http://www.atmel.com/dyn/products/tools.asp?family_id=682
21552 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
21555 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21557 commit f93ae788c3640fcde5db383471d45548ff4060d0
21558 Author: Wolfgang Denk <wd@pollux.denx.de>
21559 Date: Tue Oct 24 14:31:24 2006 +0200
21561 Add common serial driver for Atmel AT32 and AT91 chips
21562 Patch by Haavard Skinnemoen, 06 Sep 2006
21564 This is a first attempt at creating a common serial driver for Atmel
21565 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
21566 be possible to support AT91RM9200 and other ARM-based chips with some
21567 minor modifications.
21569 There's nothing fundamentally AVR32-specific in this driver, but it
21570 does use some features which are currently only defined for the
21572 * pm_get_clock_freq: Obtain the clock frequency of a given domain
21573 * gd->console_uart: A "struct device" containing information about
21574 register mappings, gpio resources and clocks associated with the
21577 For more information about these features, please see the "AT32AP
21580 commit 72a087e04705c26cad982879ebd06b5281bf825a
21581 Author: Wolfgang Denk <wd@pollux.denx.de>
21582 Date: Tue Oct 24 14:27:35 2006 +0200
21584 Add AT32AP CPU and AT32AP7000 SoC support
21585 Patch by Haavard Skinnemoen, 06 Sep 2006
21587 This patch adds support for the AT32AP CPU family and the AT32AP7000
21588 chip, which is the first chip implementing the AVR32 architecture.
21590 The AT32AP CPU core is a high-performance implementation featuring a
21591 7-stage pipeline, separate instruction- and data caches, and a MMU.
21592 For more information, please see the "AVR32 AP Technical Reference":
21594 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
21596 In addition to this, the AT32AP7000 chip comes with a large set of
21597 integrated peripherals, many of which are shared with the AT91 series
21598 of ARM-based microcontrollers from Atmel. Full data sheet is
21601 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
21603 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21605 commit 7b64fef33c66be648826c0ff9758298ef13d0604
21606 Author: Wolfgang Denk <wd@pollux.denx.de>
21607 Date: Tue Oct 24 14:21:16 2006 +0200
21609 Add AVR32 architecture support
21610 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
21612 This patch adds common infrastructure code for the Atmel AVR32
21613 architecture. See doc/README.AVR32 for details.
21615 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21617 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
21618 Author: Wolfgang Denk <wd@pollux.denx.de>
21619 Date: Tue Oct 24 13:57:33 2006 +0200
21621 Use -g instead of -gstabs in AFLAGS_DEBUG
21622 Patch by Haavard Skinnemoen, 30 Aug 2006
21624 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
21625 matter what the target's preferred debugging format is. This patch
21626 simply replaces -gstabs with -g, so that the default debugging format
21627 for the architecture is used.
21629 commit 965829872169c2996023840d98e1d85ad148d629
21630 Author: Wolfgang Denk <wd@pollux.denx.de>
21631 Date: Tue Oct 24 13:55:18 2006 +0200
21633 Fix/workaround broken dependency handling with make 3.81
21634 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
21636 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
21637 Author: Marian Balakowicz <m8@semihalf.com>
21638 Date: Mon Oct 23 22:17:05 2006 +0200
21640 Fix sequoia separate object direcory building problems.
21642 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
21643 Author: Jon Loeliger <jdl@freescale.com>
21644 Date: Fri Oct 20 17:16:35 2006 -0500
21646 Use generic I2C register block on 85xx and 86xx.
21648 Replace private IMMAP I2C structures with generic reg block
21649 and allow 86xx to have multiple I2C device busses.
21651 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21653 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
21654 Author: Jon Loeliger <jdl@freescale.com>
21655 Date: Fri Oct 20 15:54:34 2006 -0500
21657 Fix compilation warnings on a few 85xx boards.
21659 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21661 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
21662 Author: Jon Loeliger <jdl@freescale.com>
21663 Date: Fri Oct 20 15:50:15 2006 -0500
21665 Converted all 85xx boards to use a common FSL I2C driver.
21666 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
21667 And removed hard i2c path from a few u-boot.lds scipts too.
21668 Minor whitespace cleanups along the way.
21670 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21672 commit 4d45f69e362b05892c9e92a7907e5820995612aa
21673 Author: Jon Loeliger <jdl@freescale.com>
21674 Date: Thu Oct 19 12:02:24 2006 -0500
21676 Rewrite a series of goto statements as a sequences of
21677 conditional expressions instead.
21679 Use consistent return code 0/-1 for good/bad indicators.
21681 Include one fewer file if the driver isn't used at all.
21683 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21685 commit 7237c033b02fe295880435f1eb80819a0c987532
21686 Author: Jon Loeliger <jdl@freescale.com>
21687 Date: Thu Oct 19 11:02:16 2006 -0500
21689 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
21691 in an effort to begin to unify the umpteen FSL I2C drivers that
21692 are all otherwise very similar.
21694 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21696 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
21697 Author: Jon Loeliger <jdl@freescale.com>
21698 Date: Thu Oct 19 11:33:52 2006 -0500
21700 * Fix a bunch of compiler warnings for gcc 4.0
21702 Signed-off-by: Matthew McClintock <msm@freescale.com>
21704 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
21705 Author: Stefan Roese <sr@denx.de>
21706 Date: Tue Oct 17 06:14:31 2006 +0200
21708 Add monitor functions for indirect access to PPC440 DCR's
21709 Patch by Leonid Baryudin, 12 Oct 2006
21711 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
21712 Author: Jon Loeliger <jdl@freescale.com>
21713 Date: Fri Oct 13 16:47:53 2006 -0500
21715 Fixed leading whitespace issues.
21716 Removed spurious LAWAR thing.
21718 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21720 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
21721 Author: Jon Loeliger <jdl@freescale.com>
21722 Date: Thu Oct 12 10:42:36 2006 -0500
21724 Remove unneeded include files and local variable.
21726 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21728 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
21729 Author: Grant Likely <grant.likely@secretlab.ca>
21730 Date: Tue Oct 10 00:23:32 2006 -0600
21732 Fix possible uninitialized variable compiler warning.
21734 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
21735 do_bootm_linux() may be uninitialized. There is no possibility in the
21736 current code that len will get used uninitialized, but this fix follows
21737 the existing convention of setting both len and data to zero at the same
21740 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21742 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
21743 Author: Matthew McClintock <msm@freescale.com>
21744 Date: Wed Oct 11 15:13:01 2006 -0500
21746 * Fix a bunch of compiler warnings for gcc 4.0
21748 Signed-off-by: Matthew McClintock <msm@freescale.com>
21750 commit bf651baa365e5447246aad6a633ccd667cf24a39
21751 Author: Jon Loeliger <jdl@freescale.com>
21752 Date: Wed Oct 11 10:10:43 2006 -0500
21754 Move "ar" flags to config.mk to allow for silent "make -s"
21756 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
21757 Author: Jon Loeliger <jdl@freescale.com>
21758 Date: Tue Oct 10 17:19:03 2006 -0500
21760 Coding style changes to remove local varible blocks
21761 and reformat a bit nicer.
21763 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
21764 Author: Jon Loeliger <jdl@freescale.com>
21765 Date: Tue Oct 10 17:16:04 2006 -0500
21767 Fix whitespace issues.
21769 commit 7b382b7125f2397cce63253df62f183e3dfa2770
21770 Author: Jon Loeliger <jdl@freescale.com>
21771 Date: Tue Oct 10 17:14:45 2006 -0500
21773 Fix whitespace issues.
21775 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
21776 Author: Jon Loeliger <jdl@freescale.com>
21777 Date: Tue Oct 10 17:06:53 2006 -0500
21779 Fix whitespace issues.
21781 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
21782 Author: Jon Loeliger <jdl@freescale.com>
21783 Date: Tue Oct 10 17:03:43 2006 -0500
21785 Ran lindent and cleaned up whitespace issues.
21786 Format for 80-columns too.
21788 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
21789 Author: Jon Loeliger <jdl@freescale.com>
21790 Date: Tue Oct 10 17:02:22 2006 -0500
21792 Fix whitespace and 80-col issues.
21794 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
21795 Author: Stefan Roese <sr@denx.de>
21796 Date: Sat Oct 7 11:36:51 2006 +0200
21798 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
21799 Patch by Stefan Roese, 07 Oct 2006
21801 commit 5bc528fa4da751d472397b308137238a6465afd2
21802 Author: Stefan Roese <sr@denx.de>
21803 Date: Sat Oct 7 11:35:25 2006 +0200
21805 Update ALPR code (NAND support working now)
21806 Patch by Stefan Roese, 07 Oct 2006
21808 commit 77d5034847d328753b80c46b83f960a14a26f40e
21809 Author: Stefan Roese <sr@denx.de>
21810 Date: Sat Oct 7 11:33:03 2006 +0200
21812 Remove compile warnings in fpga code
21813 Patch by Stefan Roese, 07 Oct 2006
21815 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
21816 Author: Stefan Roese <sr@denx.de>
21817 Date: Sat Oct 7 11:30:52 2006 +0200
21819 Add CONFIG_BOARD_RESET to configure board specific reset function
21820 Patch by Stefan Roese, 07 Oct 2006
21822 commit f55df18187e7a45cb73fec4370d12135e6691ae1
21823 Author: John Traill <john.traill@freescale.com>
21824 Date: Fri Sep 29 08:23:12 2006 +0100
21826 Fix missing tCycle/modfreq calculation.
21828 Signed-off-by: John Traill <john.traill@freescale.com>
21830 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
21831 Author: Andy Fleming <afleming@freescale.com>
21832 Date: Wed Sep 13 10:33:35 2006 -0500
21834 Updated config headers to add default FDT-based booting
21836 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
21837 Author: Andy Fleming <afleming@freescale.com>
21838 Date: Wed Sep 13 10:34:18 2006 -0500
21840 Add support for eTSEC 3 & 4 on 8548 CDS
21842 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
21843 This will only work on rev 1.3 boards (but doesn't break older boards)
21844 * Cleaned up some comments to reflect the expanded role of tsec
21847 commit 084d648b109c8984f83674043c1a7fa3885ef801
21848 Author: Andy Fleming <afleming@freescale.com>
21849 Date: Wed Sep 13 10:33:56 2006 -0500
21851 Added code to support 2.6.18 PCI changes in u-boot
21853 * Added code to swizzle the IRQ map for the PCI
21855 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
21856 Author: Jon Loeliger <jdl@freescale.com>
21857 Date: Tue Sep 19 09:34:10 2006 -0500
21859 Modified makefile for new build mechanism.
21861 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21863 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
21864 Author: Jon Loeliger <jdl@freescale.com>
21865 Date: Thu Sep 14 08:40:36 2006 -0500
21867 Handle 86xx SVR values according to the new Reference Manual.
21868 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
21869 by the byte in bits 16-23 instead.
21870 Thanks to Jason Jin for noticing.
21872 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21874 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
21875 Author: Zhang Wei <wei.zhang@freescale.com>
21876 Date: Mon Aug 28 14:25:31 2006 +0800
21878 Fixed an OF-tree off-by-one bug when adding a new property name.
21879 This bug will cause the kernel booting to pause a long time.
21881 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
21882 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
21884 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
21885 Author: Jon Loeliger <jdl@freescale.com>
21886 Date: Tue Aug 29 11:05:09 2006 -0500
21888 Remove trailing empty lines.
21890 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
21891 Author: Jon Loeliger <jdl@freescale.com>
21892 Date: Tue Aug 29 09:48:49 2006 -0500
21894 Remove bogus msync and use volatile asm.
21896 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
21897 Author: Jon Loeliger <jdl@freescale.com>
21898 Date: Tue Aug 29 08:17:14 2006 -0500
21900 Add myself as maintainer for MPC8641HPCN.
21902 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
21903 Author: Zhang Wei <wei.zhang@freescale.com>
21904 Date: Mon Aug 28 14:25:31 2006 +0800
21906 Fixed an OF-tree off-by-one bug when adding a new property name.
21907 This bug will cause the kernel booting to pause a long time.
21909 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
21911 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
21912 Author: Haiying Wang <haiying.wang@freescale.com>
21913 Date: Fri Aug 25 14:38:34 2006 -0400
21915 Change ramdiskaddr and dtbaddr
21916 Remove PEX fluff commands.
21918 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
21919 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21921 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
21922 Author: Matthew McClintock <msm@freescale.com>
21923 Date: Wed Aug 23 13:32:45 2006 -0500
21925 * Another small fix for booting with disable_of
21927 Signed-off-by: Matthew McClintock <msm@freescale.com>
21929 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
21930 Author: Jon Loeliger <jdl@freescale.com>
21931 Date: Wed Aug 23 11:04:43 2006 -0500
21933 Cleanup and lindent new AHCI driver.
21935 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
21936 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
21937 Date: Wed Aug 23 19:15:12 2006 +0800
21939 Add AHCI define and sata support for MPC8641HPCN board.
21941 Signed-off-by:Jason Jin<jason.jin@freescale.com>
21943 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
21944 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
21945 Date: Wed Aug 23 19:10:44 2006 +0800
21947 Add AHCI support to u-boot
21949 Add AHCI support in u-boot, enable the sata disk controllers which
21950 following the AHCI protocol.
21952 Signed-off-by:Jason Jin<jason.jin@freescale.com>
21954 commit d8ea2acf5f137cae99417df4f573d036ee384668
21955 Author: Zhang Wei <wei.zhang@freescale.com>
21956 Date: Wed Aug 23 17:54:32 2006 +0800
21958 Add dtb boot-up parameter to default boot commands.
21960 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
21962 commit b93775c2036b99baa390ea425c4771895bbc63c4
21963 Author: Jon Loeliger <jdl@freescale.com>
21964 Date: Tue Aug 22 18:26:08 2006 -0500
21966 Cleanup even more poorly introduced whitespace.
21968 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
21969 Author: Jon Loeliger <jdl@freescale.com>
21970 Date: Tue Aug 22 18:07:00 2006 -0500
21972 Cleanup more poorly introduced whitespace.
21974 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
21975 Author: Jon Loeliger <jdl@freescale.com>
21976 Date: Tue Aug 22 17:54:05 2006 -0500
21978 Cleanup poorly introduced whitespace.
21980 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
21981 Author: Jon Loeliger <jdl@freescale.com>
21982 Date: Tue Aug 22 12:25:27 2006 -0500
21984 General indent and whitespace cleanups.
21986 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
21987 Author: Jon Loeliger <jdl@freescale.com>
21988 Date: Tue Aug 22 12:06:18 2006 -0500
21990 General indent and whitespace cleanups.
21992 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
21993 Author: Jon Loeliger <jdl@freescale.com>
21994 Date: Tue Aug 22 10:42:21 2006 -0500
21996 Cleanup compiler warnings.
21998 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
21999 Author: Matthew McClintock <msm@freescale.com>
22000 Date: Tue Aug 22 09:31:59 2006 -0500
22002 Fix disable_of booting
22004 Signed-off-by: Matthew McClintock <msm@freescale.com>
22006 commit 87a449c8ac396420cb24260f717ea9e6faa82047
22007 Author: Matthew McClintock <msm@freescale.com>
22008 Date: Tue Aug 22 09:23:55 2006 -0500
22010 Support for FDT in uImage format, error when using FDT from flash
22012 Signed-off-by: Matthew McClintock <msm@freescale.com>
22014 commit 75c299c38369d01addd5e054b8a16217b70f4a86
22015 Author: Haiying Wang <haiying.wang@freescale.com>
22016 Date: Tue Aug 15 15:12:55 2006 -0400
22018 Unlock cache before kernel starts up for MPC86xx
22020 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
22021 Author: Haiying Wang <haiying.wang@freescale.com>
22022 Date: Tue Aug 15 15:13:15 2006 -0400
22024 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
22026 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
22027 Author: Haiying Wang <haiying.wang@freescale.com>
22028 Date: Tue Aug 15 15:12:55 2006 -0400
22030 Unlock cache before kernel starts up for MPC86xx
22032 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
22033 Author: Haiying Wang <haiying.wang@freescale.com>
22034 Date: Tue Aug 15 15:13:15 2006 -0400
22036 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
22038 commit 86c8e17f25e972a7e272950a0735fad84e082b88
22039 Author: Matthew McClintock <msm@freescale.com>
22040 Date: Wed Aug 16 13:59:47 2006 -0500
22042 * Fix disable_of booting
22044 Signed-off-by: Matthew McClintock <msm@freescale.com>
22046 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
22047 Author: Matthew McClintock <msm@freescale.com>
22048 Date: Wed Aug 16 10:54:09 2006 -0500
22050 * Support for FDT in uImage format, error when using FDT from flash
22052 Signed-off-by: Matthew McClintock <msm@freescale.com>
22054 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
22055 Author: Stefan Roese <sr@denx.de>
22056 Date: Tue Aug 15 14:22:35 2006 +0200
22058 Add initial support for the ALPR board from Prodrive
22059 NAND needs some additional testing
22060 Patch by Heiko Schocher, 15 Aug 2006
22062 commit f0ff4692ff3372dec55074a8eb444943ab095abb
22063 Author: Stefan Roese <sr@denx.de>
22064 Date: Tue Aug 15 14:15:51 2006 +0200
22066 Add FPGA Altera Cyclone 2 support
22067 Patch by Heiko Schocher, 15 Aug 2006
22069 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
22070 Author: Jon Loeliger <jdl@freescale.com>
22071 Date: Mon Aug 14 15:33:38 2006 -0500
22073 Fix BAT0 to actually be cacheable, non-guarded as documented.
22075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22077 commit 40bc83559db5745681909fd7382ae509567e116d
22078 Author: Jon Loeliger <jdl@freescale.com>
22079 Date: Wed Aug 9 15:32:16 2006 -0500
22081 Removed MPC8641HPCN DTS source file from build.
22082 It is no longer linked into U-Boot; its sources are
22083 now located in the kernel tree.
22085 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22087 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
22088 Author: Matthew McClintock <msm@freescale.com>
22089 Date: Wed Jun 28 10:47:03 2006 -0500
22091 * Switched default PCI speed for 8540 ADS back to 33MHz
22093 * Added comments and a printf to warn that PCI-X won't
22095 Patch by Andy Fleming 17-Mar-2006
22097 Signed-off-by: Andy Fleming <afleming@freescale.com>
22099 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
22100 Author: Matthew McClintock <msm@freescale.com>
22101 Date: Wed Jun 28 10:46:35 2006 -0500
22103 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
22105 Signed-off-by: Andy Fleming <afleming@freescale.com>
22107 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
22108 Author: Matthew McClintock <msm@freescale.com>
22109 Date: Wed Jun 28 10:46:13 2006 -0500
22111 * Added VIA configuration table
22113 * Added support for PCI2 on CDS
22114 Patch by Andy Fleming 17-Mar-2006
22116 Signed-off-by: Andy Fleming <afleming@freescale.com>
22118 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
22119 Author: Matthew McClintock <msm@freescale.com>
22120 Date: Wed Jun 28 10:45:41 2006 -0500
22122 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
22124 Signed-off-by: Andy Fleming <afleming@freescale.com>
22126 commit 97074ed9655309b64231bc2cee69fe85399f8055
22127 Author: Matthew McClintock <msm@freescale.com>
22128 Date: Wed Jun 28 10:45:17 2006 -0500
22130 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
22132 Signed-off-by: Andy Fleming <afleming@freescale.com>
22134 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
22135 Author: Matthew McClintock <msm@freescale.com>
22136 Date: Wed Jun 28 10:44:49 2006 -0500
22138 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
22140 Signed-off-by: Andy Fleming <afleming@freescale.com>
22142 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
22143 Author: Matthew McClintock <msm@freescale.com>
22144 Date: Wed Jun 28 10:44:23 2006 -0500
22146 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
22148 Signed-off-by: Andy Fleming <afleming@freescale.com>
22150 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
22151 Author: Matthew McClintock <msm@freescale.com>
22152 Date: Wed Jun 28 10:43:36 2006 -0500
22154 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
22156 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22158 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
22159 Author: Matthew McClintock <msm@freescale.com>
22160 Date: Wed Jun 28 10:43:00 2006 -0500
22162 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
22164 commit 5498d90312aad9f6bdbf047986027c35b03cd163
22165 Author: Matthew McClintock <msm@freescale.com>
22166 Date: Wed Jun 28 10:42:24 2006 -0500
22168 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
22170 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
22171 Author: Matthew McClintock <msm@freescale.com>
22172 Date: Wed Jun 28 10:41:37 2006 -0500
22174 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
22176 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
22177 Author: John Traill <john.traill@freescale.com>
22178 Date: Wed Aug 9 14:33:50 2006 +0100
22180 Add Rapidio support for the MPC8641HPCN
22182 Signed-off-by: John Traill <john.traill@freescale.com>
22184 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
22185 Author: John Traill <john.traill@freescale.com>
22186 Date: Tue Aug 8 11:32:43 2006 +0100
22188 Fix caslat calculation
22190 Signed-off-by: John Traill <john.traill@freescale.com>
22192 commit 709d3073e74153278e7904a70819bbef7df50e1a
22193 Author: Jon Loeliger <jdl@freescale.com>
22194 Date: Thu Aug 3 16:17:56 2006 -0500
22196 Convert to mac-address in ethernet nodes.
22198 commit 71748af833ca1017edf1415be376366ff2937d17
22199 Author: Haiying Wang <haiying.wang@freescale.com>
22200 Date: Fri Jul 28 12:41:35 2006 -0400
22202 Correct the irq value of DUART2
22204 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
22205 Author: Haiying Wang <haiying.wang@freescale.com>
22206 Date: Fri Jul 28 12:41:41 2006 -0400
22208 Change the space size of PEX IO in README
22210 commit 239db37c94f7a92941c4465feceb867c609241c5
22211 Author: Haiying Wang <haiying.wang@freescale.com>
22212 Date: Fri Jul 28 12:41:18 2006 -0400
22214 Move get_board_sys_clk to board directory
22216 commit 492900b985439fbce1a118afde1e35def870db03
22217 Author: John Traill <john.traill@freescale.com>
22218 Date: Fri Jul 28 09:03:54 2006 +0100
22220 Fix 8641HPCN pollution
22222 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
22223 Author: John Traill <john.traill@freescale.com>
22224 Date: Fri Jul 28 08:16:06 2006 +0100
22226 Fix 8641HPCN timebase
22228 commit c86360b830f1eecd7a72208575dde4f57879faea
22229 Author: Zhang Wei <wei.zhang@freescale.com>
22230 Date: Fri Jul 28 00:01:34 2006 +0800
22232 Fixed OF device tree of mpc86xxhpcn board.
22234 The changes works in with kernel irq mapping rework.
22236 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
22238 commit bea3f28d285942bf3f7ab339ce85178ded544225
22239 Author: Haiying Wang <haiying.wang@freescale.com>
22240 Date: Wed Jul 12 10:48:05 2006 -0400
22242 Add support for reading and writing mac addresses to or from ID EEPROM.
22244 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
22245 With attached patch, we can use command "mac/mac read/mac save/"
22246 to read and write EEPROM under u-boot prompt.
22248 U-boot will calculate the checksum of EEPROM while bootup,
22249 if it is right, then u-boot will check whether the mac address
22250 of eTSEC0/1/2/3 is availalbe (non-zero).
22252 If there is mac address availabe in EEPROM, u-boot will use it,
22253 otherewise, u-boot will use the mac address defined in
22254 MPC8641HPCN.h. This matches the requirement to set unique mac address
22255 for each TSEC port.
22257 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
22258 Signed-off-by: York Sun <yorksun@freescale.com>
22260 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
22261 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
22262 Date: Thu Jul 13 10:35:10 2006 -0500
22264 Fixed initrd issue by define big RAM
22266 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
22268 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
22269 Author: Jason Jin <Jason.jin@freescale.com>
22270 Date: Fri Jul 7 10:01:45 2006 -0500
22272 We made a u-boot patch to fix the hang up issue
22273 when booting filesystem from ramdisk.
22275 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
22277 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
22278 Author: Matthew McClintock <msm@freescale.com>
22279 Date: Wed Jun 28 10:47:03 2006 -0500
22281 * Switched default PCI speed for 8540 ADS back to 33MHz
22282 * Added comments and a printf to warn that PCI-X won't
22284 Patch by Andy Fleming 17-Mar-2006
22286 Signed-off-by: Andy Fleming <afleming@freescale.com>
22288 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
22289 Author: Matthew McClintock <msm@freescale.com>
22290 Date: Wed Jun 28 10:46:35 2006 -0500
22292 * Fixed a bug where 8555 PCI code used the old variable and
22294 Patch by Andy Fleming 17-Mar-2006
22296 Signed-off-by: Andy Fleming <afleming@freescale.com>
22298 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
22299 Author: Matthew McClintock <msm@freescale.com>
22300 Date: Wed Jun 28 10:46:13 2006 -0500
22302 * Added VIA configuration table
22303 * Added support for PCI2 on CDS
22304 Patch by Andy Fleming 17-Mar-2006
22306 Signed-off-by: Andy Fleming <afleming@freescale.com>
22308 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
22309 Author: Matthew McClintock <msm@freescale.com>
22310 Date: Wed Jun 28 10:45:41 2006 -0500
22312 * Fixed PCI memory definitions
22313 Patch by Andy Fleming 17-Mar-2006
22315 Signed-off-by: Andy Fleming <afleming@freescale.com>
22317 commit 087454609e47295443af793a282cddcd91a5f49c
22318 Author: Matthew McClintock <msm@freescale.com>
22319 Date: Wed Jun 28 10:45:17 2006 -0500
22321 * Added support for initializing second PCI bus on 85xx
22322 Patch by Andy Fleming 17-Mar-2006
22324 Signed-off-by: Andy Fleming <afleming@freescale.com>
22326 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
22327 Author: Matthew McClintock <msm@freescale.com>
22328 Date: Wed Jun 28 10:44:49 2006 -0500
22330 * Added PCI-X #defines for PCI-X initialization
22331 Patch by Andy Fleming on 17-Mar-2006
22333 Signed-off-by: Andy Fleming <afleming@freescale.com>
22335 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
22336 Author: Matthew McClintock <msm@freescale.com>
22337 Date: Wed Jun 28 10:44:23 2006 -0500
22339 * Made sure the code which disables prefetch for PCI devices
22340 sets the size of the prefetch region to 0
22341 Patch by Andy Fleming on 17-Mar-2006
22343 Signed-off-by: Andy Fleming <afleming@freescale.com>
22345 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
22346 Author: Matthew McClintock <msm@freescale.com>
22347 Date: Wed Jun 28 10:43:36 2006 -0500
22349 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
22350 Patch by Jon Loeliger 17-Jan-2006
22352 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22354 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
22355 Author: Matthew McClintock <msm@freescale.com>
22356 Date: Wed Jun 28 10:43:00 2006 -0500
22358 * Removed the oftree.dts for stxxtx in light of the changes
22359 to the flat device tree handling code
22360 Patch by Matthew McClintock 26-June-2006
22362 commit 1b380ec225665e73959677f3893dc658c5925e05
22363 Author: Matthew McClintock <msm@freescale.com>
22364 Date: Wed Jun 28 10:42:24 2006 -0500
22366 * Patch to modify ft_build.c to update flat device trees in place
22367 Patch by Matthew McClintock 26-June-2006
22369 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
22370 Author: Matthew McClintock <msm@freescale.com>
22371 Date: Wed Jun 28 10:41:37 2006 -0500
22373 * Modify bootm command to support booting with flat device trees
22374 Patch by Matthew McClintock 26-June-2006
22376 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
22377 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
22378 Date: Wed Jun 28 08:43:56 2006 -0500
22380 Change Id to symbolic name for RTL8139
22382 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
22384 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
22385 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
22386 Date: Tue Jun 27 18:12:10 2006 +0800
22388 Fix RTL8139 in big endian
22390 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
22391 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
22393 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
22394 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
22395 Date: Tue Jun 27 18:12:23 2006 +0800
22397 Fix Tsec bug when no link
22399 When tftp a non-exist file from the tftp server, u-boot will check
22400 the link of all eth port. The original file will return wrong link
22401 state on the no link ports.
22403 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
22405 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
22406 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
22407 Date: Tue Jun 27 18:12:02 2006 +0800
22409 Fix bug for io_bar size during pci scan
22411 During the pci scan process, Some devices return bar_reponse with the
22412 highest bytes 0, such as the pci bridge in uli1575 return bar_response
22413 with 0xffffff, So the bar_size should be manually set under 64K.
22415 Signed-off-by: Jason Jin <jason.jin@freescale.com>
22417 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
22418 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
22419 Date: Tue Jun 27 18:11:54 2006 +0800
22421 Enable PCIE1 for MPC8641HPCN board
22423 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
22425 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
22426 Author: Wolfgang Denk <wd@pollux.denx.de>
22427 Date: Mon Jun 26 11:06:00 2006 +0200
22431 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
22432 Author: Jon Loeliger <jdl@freescale.com>
22433 Date: Thu Jun 22 08:51:46 2006 -0500
22435 Fix bug in 8641hpcn reset command with no args.
22437 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
22438 Acked-by: Jon Loeliger <jdl@freescale.com>
22440 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
22441 Author: Zhang Wei <wei.zhang@freescale.com>
22442 Date: Tue Jun 20 17:47:15 2006 +0800
22444 Reworked IRQ mapping in OF-tree.
22446 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
22447 Author: Jon Loeliger <jdl@freescale.com>
22448 Date: Thu Jun 15 21:33:37 2006 -0500
22450 Do not enable address translation on secondary CPUs.
22451 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
22453 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22455 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
22456 Author: Wolfgang Denk <wd@pollux.denx.de>
22457 Date: Wed Jun 14 18:14:56 2006 +0200
22461 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
22462 Author: Wolfgang Denk <wd@pollux.denx.de>
22463 Date: Wed Jun 14 17:45:53 2006 +0200
22465 Various USB related patches
22466 - Add support for mpc8xx USB device.
22467 - Add support for Common Device Class - Abstract Control Model USB console.
22468 - Add support for flow control in USB slave devices.
22469 - Add support for switching between gserial and cdc_acm using environment.
22470 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
22471 - Update usbcore slightly to ease host enumeration.
22472 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
22473 - Add AdderUSB_config as a defconfig to enable usage of the USB console
22474 by default with the Adder87x U-Boot port.
22475 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
22477 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
22478 Author: Jon Loeliger <jdl@jdl.com>
22479 Date: Wed Jun 7 10:53:55 2006 -0500
22481 Fix a get_board_sys_clk() use-before-def warning.
22483 Signed-off-by: Jon Loeliger <jdl@jdl.com>
22485 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
22486 Author: Jon Loeliger <jdl@jdl.com>
22487 Date: Wed Jun 7 10:52:49 2006 -0500
22489 Allow DTC path to be passed in.
22491 Signed-off-by: Jon Loeliger <jdl@jdl.com>
22493 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
22494 Author: Haiying Wang <haiying.wang@freescale.com>
22495 Date: Tue Jun 6 16:54:29 2006 -0400
22497 Modify the IRQ of DUART2
22499 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
22500 Author: Jon Loeliger <jdl@jdl.com>
22501 Date: Wed May 31 13:55:35 2006 -0500
22505 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22507 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
22508 Author: Jon Loeliger <jdl@jdl.com>
22509 Date: Wed May 31 12:44:44 2006 -0500
22511 White space cleanup.
22512 Some 80-column cleanups.
22513 Convert printf() to puts() where possible.
22514 Use #include "spd_sdram.h" as needed.
22515 Enhanced reset command usage message a bit.
22517 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22519 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
22520 Author: Jon Loeliger <jdl@jdl.com>
22521 Date: Wed May 31 11:39:34 2006 -0500
22523 Removed unneeded local_bus_init() from 8641HPCN board.
22525 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22527 commit 4d3d729c16c392d2982d3266b659d333c927697d
22528 Author: Jon Loeliger <jdl@jdl.com>
22529 Date: Wed May 31 11:24:28 2006 -0500
22531 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
22533 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22535 commit b2a941de060350ad15878d8219825f4950e9bb8e
22536 Author: Jon Loeliger <jdl@jdl.com>
22537 Date: Wed May 31 10:07:28 2006 -0500
22539 Remove dead debug code.
22541 Signed-off-by: Jon Loeliger <jdl@jdl.com>
22543 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
22544 Author: Jon Loeliger <jdl@freescale.com>
22545 Date: Tue May 30 17:47:00 2006 -0500
22547 Move mpc86xx PIXIS code to board directory
22549 First cut at moving the PIXIS platform code out of
22550 the 86xx cpu directory and into board/mpc8641hpcn
22553 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22555 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
22556 Author: Markus Klotzbuecher <mk@denx.de>
22557 Date: Tue May 30 16:56:14 2006 +0200
22559 Support generic OHCI support for the s3c24x0 cpu.
22561 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
22562 Author: Haiying Wang <Haiying.Wang@freescale.com>
22563 Date: Tue May 30 09:10:32 2006 -0500
22565 Improve "reset" command's interaction with watchdog.
22567 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
22568 "reset altbank wd" will reset another bank WITH watch dog enabled
22569 "diswd" will disable watch dog after u-boot boots up successfully
22571 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
22573 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
22574 Author: Haiying Wang <Haiying.Wang@freescale.com>
22575 Date: Tue May 30 08:51:19 2006 -0500
22577 Fix two SDRAM setup bugs.
22580 Enable 1T/2T based on number of DIMMs present.
22582 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
22584 commit d11fec5015334deb2010e36ce00bb118cc5429a5
22585 Author: Haiying Wang <Haiying.Wang@freescale.com>
22586 Date: Fri May 26 10:24:48 2006 -0500
22588 Add first draft of the MPC8641HPCN doc/README.
22590 Signed-off-by: Jon Loeliger <jdl@jdl.com>
22592 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
22593 Author: Haiying Wang <Haiying.Wang@freescale.com>
22594 Date: Fri May 26 10:13:04 2006 -0500
22596 Added pci@8000 block.
22597 Updated ethernet interrupt mappings (moved up 48).
22598 Cleaned up a few comments.
22600 Signed-off-by: Jon Loeliger <jdl@jdl.com>
22602 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
22603 Author: Haiying Wang <Haiying.Wang@freescale.com>
22604 Date: Fri May 26 10:01:16 2006 -0500
22606 Allow args on reset command.
22608 Signed-off-by: Jon Loeliger <jdl@jdl.com>
22610 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
22611 Author: Markus Klotzbuecher <mk@denx.de>
22612 Date: Tue May 23 13:38:35 2006 +0200
22614 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
22615 fixes to the latter.
22617 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
22618 Author: Markus Klotzbuecher <mk@denx.de>
22619 Date: Tue May 23 10:33:11 2006 +0200
22621 More cleanup for the delta board and the generic usb_ohci driver. Added
22622 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
22623 initialization and cleanup hooks respectively.
22625 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
22626 Author: Markus Klotzbuecher <mk@denx.de>
22627 Date: Mon May 22 16:33:54 2006 +0200
22629 This patch adds USB storage support for the delta board. This is the first
22630 board to make use of a generic OHCI driver, that calls hooks for board
22631 dependant initialization.
22633 commit 14e37081ff3cac7ebe6e93836523429853b6b292
22634 Author: Jon Loeliger <jdl@jdl.com>
22635 Date: Fri May 19 13:28:39 2006 -0500
22637 Change arbitration to round-robin for SMP linux.
22639 commit 9a655876e5995be80f49054e2509500e871e4d3a
22640 Author: Jon Loeliger <jdl@jdl.com>
22641 Date: Fri May 19 13:26:34 2006 -0500
22643 Enable dual DDR controllers and interleaving.
22645 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
22646 Author: Jon Loeliger <jdl@jdl.com>
22647 Date: Fri May 19 13:22:44 2006 -0500
22649 Update 86xx address map and LAWBARs.
22651 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
22652 Author: Jon Loeliger <jdl@jdl.com>
22653 Date: Fri May 19 13:14:15 2006 -0500
22655 Remove L2 Cache invalidate polling.
22657 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
22658 Author: Jon Loeliger <jdl@jdl.com>
22659 Date: Fri May 19 12:33:09 2006 -0500
22661 Enable 2nd CPU and I2C.
22663 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
22664 Author: Jon Loeliger <jdl@freescale.com>
22665 Date: Mon May 15 07:26:56 2006 -0500
22667 Update interrupt mapping.
22669 commit 6cfea33477b04b63ed47386ed1629529484c33ba
22670 Author: Haiying Wang <Haiying.Wang@freescale.com>
22671 Date: Wed May 10 09:38:06 2006 -0500
22673 Remove unneeded INIT_RAM_LOCK cache twiddling.
22674 Correctly tracks r29 as global data pointer now.
22676 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
22678 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
22679 Author: Jon Loeliger <jdl@freescale.com>
22680 Date: Wed May 10 09:33:07 2006 -0500
22682 Remove unnecessary flash.c file.
22684 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
22685 Author: Jon Loeliger <jdl@freescale.com>
22686 Date: Tue May 9 08:23:49 2006 -0500
22688 Get MPC8641HPCN flash images working.
22690 Enable the CFI driver.
22691 Remove bogus LAWBAR7 cruft.
22692 Use correct TEXT_BASE, Fixup load script.
22693 Enable SPD EEPROM during DDR setup.
22694 Use generic RFC 1918 IP addresses by default.
22696 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
22697 Author: Jon Loeliger <jdl@freescale.com>
22698 Date: Thu Apr 27 10:15:16 2006 -0500
22700 Cleanup whitespaces and style issues.
22701 Removed //-style comments.
22702 Use 80-column lines.
22703 Remove trailing whitespace.
22704 Remove dead code and debug cruft.
22706 commit a2320a6bf8113a09544c42d160d10ac69d049a03
22707 Author: Jon Loeliger <jdl@freescale.com>
22708 Date: Thu Apr 27 08:22:39 2006 -0500
22710 Revert bad PCI prefetch limit change.
22712 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
22713 Author: Jon Loeliger <jdl@freescale.com>
22714 Date: Wed Apr 26 17:58:56 2006 -0500
22716 Initial support for MPC8641 HPCN board.